WorldWideScience

Sample records for energy development technical

  1. Innovative and practical technical development of nuclear energy. Efforts on proposal and recruitment type technical development of nuclear energy

    International Nuclear Information System (INIS)

    Matsui, Kazuaki; Shioiri, Akio; Hamada, Jun; Kanagawa, Takashi; Mori, Yukihide; Kouno, Koji

    2003-01-01

    In technical development of nuclear energy conceiving a view on energy environment problem at the 21st Century, technical development on innovative nuclear energy system as well as next generation LWR is an important subject. Even in Japan, on the 'Long-term program for research, development and utilization of nuclear energy (LPRNE)' summarized by the Atomic Energy Commission, investigation on R and Ds of innovative reactors under cooperation of government, industrial field, and universities is required. In the Energy Generalized Engineering Institute, by receiving a subsidy from the Ministry of Economy and Industry since 2000, a proposal recruitment business on innovative and practical technical development of nuclear energy has been carried out. Here were introduced hopeful and unique five themes out of them applied to the recruitment, such as a super-critical pressure water cooling reactor (SCPR), an integrated modular LWR (IMR): technical development for practice, technical development on general purpose boiling transitional analysis method, technical development on direct extraction of U and Pu from consumed fuels based on super-DIREX reprocessing method, and material transfer forecasting in natural barriers at landfill disposal of radioactive wastes. (G.K.)

  2. Technical developments of solar energy collectors in the Netherlands

    NARCIS (Netherlands)

    Oversloot, H.P.; Geus, A.C. de

    1996-01-01

    Recent research by TNO covered two different technical developments for thermal solar energy systems. One concerns a feasibility study into an all plastic spectral selective absorber, the other is a feasibility study for an overheating protection device based on heatpipe techniques. Earlier studies

  3. Energy resources technical training and development programs for American Indians

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, R E; White, W S

    1978-08-01

    Because of the energy resources located on Native American owned lands, it is pertinent that the tribes on these reservations receive information, training, and technical assistance concerning energy and the environment and the decisions that must be made about energy-resource development. In the past, attempts to enlist Indians in technical-assistance programs met with little success because teaching methods seldom incorporated program planning by both tribal leaders and the technical training staff. Several technical-assistance programs given on reservations in the central and western parts of the country were conducted by Argonne National Lab.--programs that stressed practical, on-the-job experience through lecture, laboratory, and field studies. Each program was designed by ANL and tribal leaders to fit the needs and concerns of a particular tribe for its environment. The individual programs met with an impressive degree of success; they also prompted several Indians to pursue this type of education further at ANL and local Indian community colleges and to obtain funds for energy projects. Despite the positive feedback, several difficulties were encountered. Among them are the necessity to continually modify the programs to fit diverse tribal needs, to diminish politically motivated interference, and to increase portions of the funding to involve more Native Americans.

  4. Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicable to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).

  5. Native American Technical Assistance and Training for Renewable Energy Resource Development and Electrical Generation Facilities Management

    Energy Technology Data Exchange (ETDEWEB)

    A. David Lester

    2008-10-17

    The Council of Energy Resource Tribes (CERT) will facilitate technical expertise and training of Native Americans in renewable energy resource development for electrical generation facilities, and distributed generation options contributing to feasibility studies, strategic planning and visioning. CERT will also provide information to Tribes on energy efficiency and energy management techniques.This project will provide facilitation and coordination of expertise from government agencies and private industries to interact with Native Americans in ways that will result in renewable energy resource development, energy efficiency program development, and electrical generation facilities management by Tribal entities. The intent of this cooperative agreement is to help build capacity within the Tribes to manage these important resources.

  6. A Technical and Economic Optimization Approach to Exploring Offshore Renewable Energy Development in Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    Larson, Kyle B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tagestad, Jerry D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Perkins, Casey J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Oster, Matthew R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Warwick, M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Geerlofs, Simon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-09-01

    This study was conducted with the support of the U.S. Department of Energy’s (DOE’s) Wind and Water Power Technologies Office (WWPTO) as part of ongoing efforts to minimize key risks and reduce the cost and time associated with permitting and deploying ocean renewable energy. The focus of the study was to discuss a possible approach to exploring scenarios for ocean renewable energy development in Hawaii that attempts to optimize future development based on technical, economic, and policy criteria. The goal of the study was not to identify potentially suitable or feasible locations for development, but to discuss how such an approach may be developed for a given offshore area. Hawaii was selected for this case study due to the complex nature of the energy climate there and DOE’s ongoing involvement to support marine spatial planning for the West Coast. Primary objectives of the study included 1) discussing the political and economic context for ocean renewable energy development in Hawaii, especially with respect to how inter-island transmission may affect the future of renewable energy development in Hawaii; 2) applying a Geographic Information System (GIS) approach that has been used to assess the technical suitability of offshore renewable energy technologies in Washington, Oregon, and California, to Hawaii’s offshore environment; and 3) formulate a mathematical model for exploring scenarios for ocean renewable energy development in Hawaii that seeks to optimize technical and economic suitability within the context of Hawaii’s existing energy policy and planning.

  7. Technical Development for S-CO2 Advanced Energy Conversion

    International Nuclear Information System (INIS)

    Anderson, Mark; Ranjan, Devesh; Hassan, Yassin

    2014-01-01

    up to 60,000, at operating pressures of 7.5, 8.1, and 10.2 MPa were tested in a round tube. Local heat transfer coefficients were obtained from measured wall temperatures over a large set of experimental parameters that varied inlet temperature from 20 °C to 55 °C,mass flux from 150 to 350 kg/m 2 s, and a maximum heat flux of 65 KW/m 2 . Horizontal, upward and downward flows were tested to investigate the unusual heat-transfer characteristics to the effect of buoyancy and flow acceleration caused by large variation in density. Final part of this report presents the simplified analysis performed to investigate the possibility of using wet cooling tower option to reject heat from the supercritical carbon dioxide Brayton cycle power convertor for AFR-100 and ABR-1000 plants. A code was developed to estimate the tower dimensions, power and water consumption, and to perform economic analysis. The code developed was verified by comparing the calculations to a vendor quote. The effect of ambient air and water conditions on the sizing and construction of the cooling tower as well as the cooler is studied. Finally, a cost-based optimization technique is used to estimate the optimum water conditions which will improve the plant economics.

  8. Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Pless, S.; Torcellini, P.; Long, N.

    2007-09-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

  9. US Department of Energy mixed waste characterization, treatment, and disposal focus area technical baseline development process

    International Nuclear Information System (INIS)

    Roach, J.A.; Gombert, D.

    1996-01-01

    The US Department of Energy (DOE) created the Mixed Waste Characterization, Treatment, and Disposal Focus Area (MWFA) to develop and facilitate implementation of technologies required to meet its commitments for treatment of mixed wastes under the Federal Facility Compliance Act (FFCA), and in accordance with the Land Disposal Restrictions (LDR) of the Resource Conservation and Recovery Act (RCRA). Mixed wastes include both mixed low-level waste (MLLW) and mixed transuranic (MTRU) waste. The goal of the MWFA is to develop mixed waste treatment systems to the point of implementation by the Environmental Management (EM) customer. To accomplish this goal, the MWFA is utilizing a three step process. First, the treatment system technology deficiencies were identified and categorized. Second, these identified needs were prioritized. This resulted in a list of technical deficiencies that will be used to develop a technical baseline. The third step, the Technical Baseline Development Process, is currently ongoing. When finalized, the technical baseline will integrate the requirements associated with the identified needs into the planned and ongoing environmental research and technology development activities supported by the MWFA. Completion of this three-step process will result in a comprehensive technology development program that addresses customer identified and prioritized needs. The MWFA technical baseline will be a cost-effective, technically-defensible tool for addressing and resolving DOE's mixed waste problems

  10. Technical characteristic analysis of wind energy conversion systems for sustainable development

    International Nuclear Information System (INIS)

    BoroumandJazi, G.; Rismanchi, B.; Saidur, R.

    2013-01-01

    Highlights: ► Identifying the required technical characteristics of sustainable wind power system. ► Observing Weibull probability function and artificial neural networks for reliability. ► Daily/monthly generation data are used to investigate the system’s availability. - Abstract: Wind energy as a clean, environmentally friendly and cost effective renewable energy resource, is taken into consideration by many developed and developing countries as a promising means to provide electrical energy. In feasibility study stage of the wind energy systems, the sustainability analysis is one of the main issues that can assure the investors and stockholders to invest in this renewable energy. Since a system can be truly sustainable by achieving the energetic, ecological and economic sustainability, the present study will focus on the technical characteristics and performance analysis of the wind energy systems. The relations between reliability, availability, energy and exergy efficiency, risk management and the environmental impact of the wind energy systems are investigated in the context of this study. It is concluded that the wind characteristics data and the wind speed are the main effective parameters on its reliability and availability. It is also revealed that considering the system loss, exergy efficiency results of the wind energy systems are more reliable than the energy efficiencies. Due to avoid future failure of the systems, the causes of the failure are investigated and it was concluded that the structural failures caused by storms and strong winds are known as the most prevalent failures

  11. International Standards Development for Marine and Hydrokinetic Renewable Energy - Final Report on Technical Status

    Energy Technology Data Exchange (ETDEWEB)

    Rondorf, Neil E.; Busch, Jason; Kimball, Richard

    2011-10-29

    This report summarizes the progress toward development of International Standards for Marine and Hydrokinetic Renewable Energy, as funded by the U.S. Department of Energy (DOE) under the International Electrotechnical Commission (IEC) Technical Committee 114. The project has three main objectives: 1. Provide funding to support participation of key U.S. industry technical experts in 6 (originally 4) international working groups and/or project teams (the primary standards-making committees) and to attend technical meetings to ensure greater U.S. involvement in the development of these standards. 2. Provide a report to DOE and industry stakeholders summarizing the IEC standards development process for marine and hydrokinetic renewable energy, new international standards and their justifications, and provide standards guidance to industry members. 3. Provide a semi-annual (web-based) newsletter to the marine renewable energy community. The newsletter will educate industry members and stakeholders about the processes, progress, and needs of the US efforts to support the international standards development effort. The newsletter is available at www.TC114.us

  12. Technical cooperation on government base with developing countries in the field of atomic energy

    International Nuclear Information System (INIS)

    Hamabe, Yutaka

    1984-01-01

    Since the summer of the last year, the problems in the relation with developing countries have been actively discussed in the Atomic Energy Commission, Japan Atomic Industrial Forum Inc., and the Ministry of International Trade and Industry. As the background of this tendency, it is pointed out that Japanese nuclear industry has grown up to the level comparable with European and American counterparts and capable of advancing into the world market as the exporter of nuclear facilities, on the other hand, that Asian countries expect Japanese technical and economical power also in the field of atomic energy. In this report, the technical cooperation of the IAEA on funds, the dispatch of specialists, the supply of materials and training, the technical cooperation of Japanese International Cooperation Agency on the acceptance of trainees, the dispatch of specialists and others, and the fundamental way of thinking about the technical cooperation on government base are reported. It is very important to grasp the true needs of a partner country when a project is selected. In the cooperation, the effort of self-help by a developing country must be the major premise. (Kako, I.)

  13. Technical Support Document: Development of the Advanced Energy Design Guide for Grocery Stores--50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E. T.; Macumber, D. L.; Long, N. L.; Griffith, B. T.; Benne, K. S.; Pless, S. D.; Torcellini, P. A.

    2008-09-01

    This report provides recommendations that architects, designers, contractors, developers, owners, and lessees of grocery store buildings can use to achieve whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  14. Technical Support Document: The Development of the Advanced Energy Design Guide for Small Retail Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bing; Jarnagin, Ronald E.; Winiarski, David W.; Jiang, Wei; McBride, Merle F.; Crall, C.

    2006-09-30

    The Advanced Energy Design Guide for Small Retail Buildings (AEDG-SR) was developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the Department of Energy (DOE). The guide is intended to offer recommendations to achieve 30% energy savings and thus to encourage steady progress towards net-zero energy buildings. The baseline level energy use was set at buildings built at the turn of the millennium, which are assumed to be based on ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings (refer to as the ?Standard? in this report). ASHRAE and its partners are engaged in the development of a series of guides for small commercial buildings, with the AEDG-SR being the second in the series. Previously the partnership developed the Advanced Energy Design Guide for Small Office Buildings: Achieving 30% Energy Savings Over ANSI/ASHRAE/IESNA Standard 90.1-1999, which was published in late 2004. The technical support document prepared by PNNL details how the energy analysis performed in support of the Guide and documents development of recommendation criteria.

  15. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Leach, Matt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-06-05

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  16. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  17. Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan; McBride, M.; Liu, Bing

    2008-09-30

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).

  18. Technical Support Document: Development of the Advanced Energy Design Guide for Small Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jarnagin, Ronald E.; Liu, Bing; Winiarski, David W.; McBride, Merle F.; Suharli, L.; Walden, D.

    2006-11-30

    This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner organizations in eight months. This TSD describes the charge given to the committee in developing the office guide and outlines the schedule of the development effort. The project committee developed two prototype office buildings (5,000 ft2 frame building and 20,000 ft2 two-story mass building) to represent the class of small office buildings and performed an energy simulation scoping study to determine the preliminary levels of efficiency necessary to meet the energy savings target. The simulation approach used by the project committee is documented in this TSD along with

  19. Republic of the Marshall Islands. Energy Project Development Options and Technical Assessment (2013)

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, Misty Dawn [National Renewable Energy Lab. (NREL), Golden, CO (United States); Olis, Dan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ness, J. Erik [National Renewable Energy Lab. (NREL), Golden, CO (United States); Esterly, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    The advancement of renewable energy and energy efficient technologies continues to be fluid. There are many technical opportunities and strategies that can be utilized to guide communities to deploy cost-effective commercial alternative energy options; however, to achieve aggressive economic, environmental, and security goals, it requires a comprehensive, integrated approach. This document reports on the initial findings of an energy assessment that was conducted for the Republic of the Marshall Islands.

  20. Technical and economical aspects of the wind energy development in the french and european energy context

    International Nuclear Information System (INIS)

    Agator, J.M.

    2005-01-01

    In the context of the wind power use increase in the european union, the average wind turbines power increases also. These turbines are more adapted to little wind conditions. The offshore wind power is certainly the more adapted to the problem of implementation sites, meanwhile the offshore project costs are more expensive. More competitive costs are a challenge for the offshore wind channel. The author presents also the main technological evolutions, the french wind power industry and the future of this energy in France. (A.L.B.)

  1. Energy policy. Technical developments, political strategies, and concepts of action regarding renewable energy sources and rational energy use

    International Nuclear Information System (INIS)

    Brauch, H.G.

    1997-01-01

    This interdisciplinary study book deals with problems from the history of energy, energy sytems, energy engineering, and the potential of renewable energy sources: hydro and wind power, biomass, geothermal energy, photovoltaics and solar thermal conversion; the improvement of boundary conditions for their transfer to market; concepts of action and project funding preferences of the EU, USA and Japan in this sector; relevant activities of the federal German government and proposals by non-governmental players in the field as well as strategies for rational energy use; methods for building an energy consensus and criteria for valuating energy systems; concepts of action and proposals for extending solar energy use in the Mediterranean and Afrika, as well as political factors governing the market introduction and export promotion of renewable energy technologies in this triad: the USA, Japan, and the European Union. Seven of the papers contained in the book are individually recorded. (orig./RHM). 76 figs., 100 tabs [de

  2. Economic and technical facts and developments in the field of energy in German industry

    Energy Technology Data Exchange (ETDEWEB)

    Rolshoven, H.

    1979-07-01

    A review of the energy situation with regard to energy management and technological developments in Germany is presented. It is observed that the industrial consumption of energy is considerably lower than that of households and authorities of all kinds, leading to the conclusion that the greatest scope for saving on energy raw materials, particularly oil, lies in the area of households and small consumption areas. Some data and measures for conservation in the five most energy-intensive industries are briefly discussed. Examples of the national use of energy are given. (MCW)

  3. 77 FR 20377 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-04-04

    ... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Office of Energy Efficiency and Renewable Energy, Department...

  4. Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Rocheleau, Richard E.

    2008-09-30

    -efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world

  5. Technical papers: regional indicators of efficiency for the CO2 and the renewable energies development

    International Nuclear Information System (INIS)

    2004-01-01

    This work is based on the methodology of efficiency indicators definition, developed by the ADEME. These indicators aim to allow the control and the monitoring of regional tendencies of the energy efficiency and the CO 2 efficiency and also to be used for a common base to compare the regions according the performance criteria in matter of energy efficiency and CO 2 efficiency. (A.L.B.)

  6. Renewable energy partnerships in development cooperation: Towards a relational understanding of technical assistance

    International Nuclear Information System (INIS)

    Kruckenberg, Lena J.

    2015-01-01

    Recent decades have witnessed a surge in international programmes established to assist the adoption of renewable energy technologies (RETs) in low and lower-middle income countries. So far, such programmes have yielded mixed success. While partnerships between international, national and local organisations have become the pre-eminent model for RET programmes, we know relatively little about their contribution. This article traces the role of renewable energy partnerships in development cooperation, shifting the analytical emphasis from barriers and drivers to key actors and their relationships. It presents a relational approach for the analysis of development assistance for renewable energy, drawing on theories concerning the role of strong and weak ties in inter-organisational networks. Through an analysis of seven empirical cases from Central America, the article provides insights into how different forms of inter-organisational relationships can facilitate implementation of RET programmes but do not necessarily enhance the capacities of local organisations in a way to support a more sustainable adoption of RETs. On the basis of this analysis, theoretical and policy implications are given concerning the potential of relational approaches for researching technology diffusion processes, and the role of strong and weak ties for the success – or failure – of renewable energy partnerships. - Highlights: • Study of renewable energy partnerships in development cooperation. • Relational framework for analysis of inter-organisational technology diffusion. • Empirical cases of renewable energy partnerships in Central America. • Different types of network relationships enable/inhibit sustainable adoption. • Three policy recommendations for programme development

  7. Puget Sound Tidal Energy In-Water Testing and Development Project Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Collar, Craig W

    2012-11-16

    Tidal energy represents potential for the generation of renewable, emission free, environmentally benign, and cost effective energy from tidal flows. A successful tidal energy demonstration project in Puget Sound, Washington may enable significant commercial development resulting in important benefits for the northwest region and the nation. This project promoted the United States Department of Energy's Wind and Hydropower Technologies Program's goals of advancing the commercial viability, cost-competitiveness, and market acceptance of marine hydrokinetic systems. The objective of the Puget Sound Tidal Energy Demonstration Project is to conduct in-water testing and evaluation of tidal energy technology as a first step toward potential construction of a commercial-scale tidal energy power plant. The specific goal of the project phase covered by this award was to conduct all activities necessary to complete engineering design and obtain construction approvals for a pilot demonstration plant in the Admiralty Inlet region of the Puget Sound. Public Utility District No. 1 of Snohomish County (The District) accomplished the objectives of this award through four tasks: Detailed Admiralty Inlet Site Studies, Plant Design and Construction Planning, Environmental and Regulatory Activities, and Management and Reporting. Pre-Installation studies completed under this award provided invaluable data used for site selection, environmental evaluation and permitting, plant design, and construction planning. However, these data gathering efforts are not only important to the Admiralty Inlet pilot project. Lessons learned, in particular environmental data gathering methods, can be applied to future tidal energy projects in the United States and other parts of the world. The District collaborated extensively with project stakeholders to complete the tasks for this award. This included Federal, State, and local government agencies, tribal governments, environmental groups, and

  8. Technical development of high intensity proton accelerators in Japan Atomic Energy Research Institute (JAERI)

    International Nuclear Information System (INIS)

    Mizumoto, Motoharu

    1995-01-01

    Science and Technology Agency decided 'Options making extra gains of actinides and fission products (OMEGA)' and to promote the related researches. Also in JAERI, the research on the group separation method for separating transuranic elements, strontium and cesium from high level radioactive wastes has been carried out since the beginning of 1970s. Also the concept of the fast reactors using minor actinide mixture fuel is being established, and the accelerator annihilation treatment utilizing the nuclear spallation reaction by high energy protons has been examined. In this report, from the viewpoint of the application of accelerators to atomic energy field, the annihilation treatment method by the nuclear spallation reaction utilizing high intensity proton accelerators, the plan of the various engineering utilization of proton beam, and the development of accelerators in JAERI are described. The way of thinking on the annihilation treatment of radioactive waste, the system using fast neutrons, the way of thinking on the development of high intensity proton accelerator technology, the steps of the development, the research and development for constructing the basic technology accelerator, 2 MeV beam acceleration test, the basic technology accelerator utilization facility and so on are reported. (K.I.)

  9. Socio-technical systems analysis of waste to energy from municipal solid waste in developing economies: a case for Nigeria

    Directory of Open Access Journals (Sweden)

    Iyamu Hope O.

    2017-01-01

    Full Text Available Waste generation is an inevitable by-product of human activity, and it is on the rise due to rapid urbanisation, industrialisation, increased wealth and population. The composition of municipal solid waste (MSW in developed and developing economies differ, especially with the organic fraction. Research shows that the food waste stream of MSW in developing countries is over 50%. The case study for this investigation, Nigeria, has minimal formal recycling or resource recovery programs. The average composition of waste from previous research in the country is between 50–70% putrescible and 30–50% non-putrescible, presenting significant resource recovery potential in composting and biogas production. Waste-to-energy (WtE is an important waste management solution that has been successfully implemented and operated in most developed economies. This contribution reports the conditions that would be of interest before WtE potentials of MSW is harnessed, in an efficient waste management process in a developing economy like Nigeria. The investigation presents a set of socio-technical parameters and transition strategy model that would inform a productive MSW management and resource recovery, in which WtE can be part of the solution. This model will find application in the understanding of the interactions between the socio-economic, technical and environmental system, to promote sustainable resource recovery programs in developing economies, among which is WtE.

  10. 75 FR 74026 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-11-30

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... participation. This notice announces the meeting of the Biomass Research and Development Technical Advisory...

  11. Technical Leadership Development Program

    Science.gov (United States)

    2010-12-13

    the traditional tenets of leadership and management , systems thinking, understanding SOS issues, and thinking and acting holistically. Our research...international element 2.0 Enterprise Leadership and Management UNCLASSIFIED Contract Number: H98230-08-D-0171 DO 002. TO002, RT 004 Report No...mechanisms for leadership of the overall technical effort, for systems engineering, for requirements, management , and for systems integration. o Develop

  12. Canadian wind energy technical and market potential

    International Nuclear Information System (INIS)

    Templin, R.J.; Rangli, R.S.

    1992-01-01

    The current status of wind energy technology in Canada is reviewed, the technical potential of wind energy in Canada is estimated, and the economic market potential is assessed under several scenarios over about the next 25 years. The technical potential is seen to be large, with applications to water pumping on farms, the coupling of wind turbines to diesel-electric systems in remote communities where fuel costs are high, and the supply of electricity to main power grids. The main-grid application has greatest technical potential, but it cannot be economically exploited under the present utility buyback rate structure for intermittent power sources. A change in government policy toward market development of renewable energy sources, such as is already taking place in several European countries, would greatly increase market potential, decrease emissions of CO 2 and SO 2 , and benefit the Canadian wind energy industry. 2 figs., 1 tab

  13. The role of International Atomic Energy Agency (IAEA) Technical Cooperation (TC) programs in enhancing socioeconomic development in Sudan

    Energy Technology Data Exchange (ETDEWEB)

    Salih, A Y.S. [Development Studies and Research Institute, University of Khartoum, Khartoum (Sudan)

    2006-04-15

    The main objective of this study is to reflect the role of nuclear Techniques in development through the IAEA provision of the technical cooperation (TC) projects in Sudan, and to show their impact on socio-economic activities, improvement of infrastructures, technology transfer, and whether the targeted institutes become economically self-reliant. This study as an analytical study uses secondary sources, namely reports from IAEA and coordinators of the projects. The study also uses primary data received mainly through conducting interviews with stake holders. The study has come out with some main findings: that the IAEA technical assistances played a major role in addressing pressing issues such as socio-economic development, sustainable development and management of different fields related to application of nuclear technology. The TC assistance depends on the local component of the country, also it depends on Sudan payments of it is annual share to the IAEA technical cooperation. The important role played by Sudan Atomic Energy Commission (SAEC) in its capacity as the national coordinating body with respect to Technical Cooperation (TC) is highly appreciated. The total number of projects increased rapidly from 16 projects in 1959 to 55 projects in 2005 in different fields includes human health, agriculture, animal production, waste management, water resources, ... etc. The TC projects are associated with the country's development programmes framework (CPF) and support socio-economic activities. The management of TC projects activated at the national level were successful and have significant impact, particularly in human heath, agriculture, instrumentation and Non Destructive Testing. All the TC projects provided their funds mainly from IAEA, and assistance received from IAEA is highly effective. Sudan TC Programme had achieved a high implementation rate, where most of the projects attained their objectives, showing good results in socio-economic and infra

  14. The role of International Atomic Energy Agency (IAEA) Technical Cooperation (TC) programs in enhancing socioeconomic development in Sudan

    International Nuclear Information System (INIS)

    Salih, A.Y.S.

    2006-04-01

    The main objective of this study is to reflect the role of nuclear Techniques in development through the IAEA provision of the technical cooperation (TC) projects in Sudan, and to show their impact on socio-economic activities, improvement of infrastructures, technology transfer, and whether the targeted institutes become economically self-reliant. This study as an analytical study uses secondary sources, namely reports from IAEA and coordinators of the projects. The study also uses primary data received mainly through conducting interviews with stake holders. The study has come out with some main findings: that the IAEA technical assistances played a major role in addressing pressing issues such as socio-economic development, sustainable development and management of different fields related to application of nuclear technology. The TC assistance depends on the local component of the country, also it depends on Sudan payments of it is annual share to the IAEA technical cooperation. The important role played by Sudan Atomic Energy Commission (SAEC) in its capacity as the national coordinating body with respect to Technical Cooperation (TC) is highly appreciated. The total number of projects increased rapidly from 16 projects in 1959 to 55 projects in 2005 in different fields includes human health, agriculture, animal production, waste management, water resources, ... etc. The TC projects are associated with the country's development programmes framework (CPF) and support socio-economic activities. The management of TC projects activated at the national level were successful and have significant impact, particularly in human heath, agriculture, instrumentation and Non Destructive Testing. All the TC projects provided their funds mainly from IAEA, and assistance received from IAEA is highly effective. Sudan TC Programme had achieved a high implementation rate, where most of the projects attained their objectives, showing good results in socio-economic and infra

  15. Technical Support Document: Development of the Advanced Energy Design Guide for Medium Box Retail -- 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E. T.; Macumber, D. L.; Long, N. L.; Griffith, B. T.; Benne, K. S.; Pless, S. D.; Torcellini, P. A.

    2008-09-01

    This report provides recommendations that architects, designers, contractors, developers, owners, and lessees of medium box retail buildings can use to achieve whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004. The recommendations are given by climate zone and address building envelope, fenestration, lighting systems, HVAC systems, building automation and controls, outside air treatment, service water heating, plug loads, and photovoltaic systems. The report presents several paths to 50% savings, which correspond to different levels of integrated design. These are recommendations only, and are not part of a code or standard. The recommendations are not exhaustive, but we do try to emphasize the benefits of integrated building design, that is, a design approach that analyzes a building as a whole system, rather than as a disconnected collection of individually engineered subsystems.

  16. Socio-technical change: Developing narratives for the Danish energy and transport sector

    DEFF Research Database (Denmark)

    Hansen, Meiken

    scenarios. Different actors can be enrolled into a coalition of change through narratives which include and organise visions and expectations (Smith, Stirling, and Berkhout 2005). Central to this study is the question of how different actors in the Danish energy and transport sector envision possible...

  17. Marine renewable energies. Stakes and technical solutions

    International Nuclear Information System (INIS)

    Lacroix, Olivier; Macadre, Laura-Mae

    2012-05-01

    Marine renewable energies are able to supply carbon free energy from various ocean resources (tides, waves, currents, winds, salinity and temperature gradients). This sector, currently at an early stage of deployment, has good prospects of development in the coming years. ENEA releases a report on marine renewable energies giving a transversal vision of the associated stakes and prospects of development. Technical and economic characteristics, maturity level and specificities of each marine energy are analyzed. French and European sources of funding, regulatory framework and potential environmental and social impacts are also reported

  18. Science serving people. International Atomic Energy Agency technical co-operation for development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This brochure tells the story of how the IAEA is helping to harness knowledge to promote development and deliver real benefits to the poor. It demonstrates how nuclear science and technology applications are being employed to overcome the challenges of water scarcity, food insecurity, malnutrition, malaria, environmental degradation and many other problems. It also shows how the complementary development, safety, and security initiatives of the IAEA are fulfilling the 'Atoms for Peace' mandate of the Agency in the developing world.

  19. Science serving people. International Atomic Energy Agency technical co-operation for development

    International Nuclear Information System (INIS)

    2002-07-01

    This brochure tells the story of how the IAEA is helping to harness knowledge to promote development and deliver real benefits to the poor. It demonstrates how nuclear science and technology applications are being employed to overcome the challenges of water scarcity, food insecurity, malnutrition, malaria, environmental degradation and many other problems. It also shows how the complementary development, safety, and security initiatives of the IAEA are fulfilling the 'Atoms for Peace' mandate of the Agency in the developing world

  20. Science serving people. International Atomic Energy Agency technical co-operation for development

    International Nuclear Information System (INIS)

    2002-12-01

    This brochure tells the story of how the IAEA is helping to harness knowledge to promote development and deliver real benefits to the poor. It demonstrates how nuclear science and technology applications are being employed to overcome the challenges of water scarcity, food insecurity, malnutrition, malaria, environmental degradation and many other problems. It also shows how the complementary development, safety, and security initiatives of the IAEA are fulfilling the 'Atoms for Peace' mandate of the Agency in the developing world

  1. The effects of the German renewable energy sources Act (EEG) on market, technical and industrial development

    International Nuclear Information System (INIS)

    Stryi-Hipp, G.

    2004-01-01

    Since 1999, the German photovoltaic market has been growing rapidly. In 2003, more than 130 MWp PV systems were installed in Germany; in 2004, more than 200 MWp are expected to be installed additionally. The main reason for this impressive market success has been the market stimulation policy of the German government. In January 1999, the 100.000 Roofs Programme for photovoltaic systems had started, offering interest-reduced loans for PV systems. In April 2000, it was backed by the Renewable Energy Sources Act (EEG), which considerably increased the feed-in tariff to 99 Pfennig (0.51 euros) per kWh. Since then, the PV market has boomed. In 2003, the 100,000 Roofs Programme (HTRP) ended successfully, after loans for more than 300 MWp PV systems had been granted. In order to fill the gap created by the termination of the programme, the government decided to increase the feed-in tariff provided by the EEG. Since January 2004, grid-connected PV systems on roofs and facades receive a tariff between 0,540 euros and 0,624 euros per kWh over 20 years. This improvement of the EEG further increased the interest in photovoltaics. The growth rate of the photovoltaic market, exceeding 50% in 2004, has led to the demand being higher than the available supply of PV systems. (author)

  2. Developing Technical Skill Assessments

    Science.gov (United States)

    Hyslop, Alisha

    2009-01-01

    One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

  3. Technical Development for S-CO2 Advanced Energy Conversion

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Mark [Univ. of Wisconsin, Madison, WI (United States); Ranjan, Devesh [Texas A & M Univ., College Station, TX (United States); Hassan, Yassin [Texas A & M Univ., College Station, TX (United States)

    2014-11-10

    with Reynolds numbers up to 60,000, at operating pressures of 7.5, 8.1, and 10.2 MPa were tested in a round tube. Local heat transfer coefficients were obtained from measured wall temperatures over a large set of experimental parameters that varied inlet temperature from 20 °C to 55 °C,mass flux from 150 to 350 kg/m2s, and a maximum heat flux of 65 KW/m2. Horizontal, upward and downward flows were tested to investigate the unusual heat-transfer characteristics to the effect of buoyancy and flow acceleration caused by large variation in density. Final part of this report presents the simplified analysis performed to investigate the possibility of using wet cooling tower option to reject heat from the supercritical carbon dioxide Brayton cycle power convertor for AFR-100 and ABR-1000 plants. A code was developed to estimate the tower dimensions, power and water consumption, and to perform economic analysis. The code developed was verified by comparing the calculations to a vendor quote. The effect of ambient air and water conditions on the sizing and construction of the cooling tower as well as the cooler is studied. Finally, a cost-based optimization technique is used to estimate the optimum water conditions which will improve the plant economics.

  4. 77 FR 26276 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-05-03

    ... business of the Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  5. 78 FR 44105 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-07-23

    ... Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral statements... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  6. 76 FR 63614 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-10-13

    ... Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  7. 78 FR 64932 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-10-30

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section... Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral...

  8. The Potential for Renewable Energy Development to Benefit Restoration of the Salton Sea. Analysis of Technical and Market Potential

    Energy Technology Data Exchange (ETDEWEB)

    Gagne, Douglas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Haase, Scott [National Renewable Energy Lab. (NREL), Golden, CO (United States); Oakleaf, Brett [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hurlbut, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Akar, Sertac [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wall, Anna [National Renewable Energy Lab. (NREL), Golden, CO (United States); Turchi, Craig [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pienkos, Philip [National Renewable Energy Lab. (NREL), Golden, CO (United States); Melius, Jennifer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Melaina, Marc [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-11-01

    This report summarizes the potential for renewable energy development in the Salton Sea region, as well as the potential for revenues from this development to contribute financially to Salton Sea restoration costs. It considers solar, geothermal, biofuels or nutraceutical production from algae pond cultivation, desalination using renewable energy, and mineral recovery from geothermal fluids.


  9. Technical Submission Form: Technical Specification of a Wave Energy Farm.

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jesse D.; Kim Nielsen; Ben Kennedy; Bull, Diana L; Costello, Ronan Patrick; Jochem Weber

    2017-04-01

    The Wave - SPARC project developed the Technology Performance Level (TPL) assessment procedure based on a rigorous Systems Engineering exercise. The TPL assessment allows a whole system evaluation of Wave Energy Conversion Technology by measuring it against the requirements determined through the Systems Engineering exercise. The TPL assessment is intended to be useful in technology evaluation; in technology innovation; in allocation of public or priva te investment, and; in making equipment purchasing decisions. This Technical Submission Form (TSF) serves the purpose of collecting relevant and complete information, in a technology agnostic way, to allow TPL assessment s to be made by third party assessor s. The intended usage of this document is that the organization or people that are performing the role of developers or promoters of a particular technology will use this form to provide the information necessary for the organization or people who are perf orming the assessor role to use the TPL assessment.

  10. Development of whole-building energy design targets for commercial buildings: Phase 1, Planning: Volume 2, Technical report

    Energy Technology Data Exchange (ETDEWEB)

    Crawley, D.B.; Briggs, R.S.; Jones, J.W.; Seaton, W.W.; Kaufman, J.E.; Deringer, J.J.; Kennett, E.W.

    1987-08-01

    This is the second volume of the Phase 1 report and discusses the 10 tasks performed in Phase 1. The objective of this research is to develop a methodology for setting energy design targets to provide voluntary guidelines for the buildings industry. The whole-building energy targets project is being conducted at the Pacific Northwest Laboratory (PNL) for the US Department of Energy (DOE) to encourage the construction of energy-efficient buildings by informing designers and owners about cost-effective goals for energy use in new commercial buildings. The outcome of this research will be a flexible methodology for setting such targets. The tasks are listed and discussed in this report as follows: Task 1 - Develop Detailed Project Goals and Objectives; Task 2 - Establish Buildings-Industry Liaison; Task 3 - Develop Approaches to the Energy Targets Model, Building Operations, and Climate; Task 4 - Develop an Approach for Treating Economic Considerations; Task 5 - Develop an Approach for Treating Energy Sources; Task 6 - Collect Energy-Use Data; Task 7 - Survey Energy Expert Opinion; Task 8 - Evaluation Procedure Specification and Integration; Task 9 - Phase 1 Report Development; and Task 10 - Phase 1 Review Planning.

  11. Geospatial Analysis of Renewable Energy Technical Potential on Tribal Lands

    Energy Technology Data Exchange (ETDEWEB)

    Doris, E.; Lopez, A.; Beckley, D.

    2013-02-01

    This technical report uses an established geospatial methodology to estimate the technical potential for renewable energy on tribal lands for the purpose of allowing Tribes to prioritize the development of renewable energy resources either for community scale on-tribal land use or for revenue generating electricity sales.

  12. FY 1999 Technical research and development for environmentally friendly and highly efficient energy utilization system. Technical research and development for highly efficient and effective energy utilization (Technical research and development for optimum system designs - Part 3); 1999 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 3. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Research and development program is conducted for the elementary techniques as part of the eco-energy urban project of New Sunshine Project. Described herein are the FY 1999 results for the (techniques for transportation and storage of energy (continued), energy supply and utilization, reducing environmental loads, and designing the optimum systems). The R and D on heat transfer system through the vacuum heat insulation pipes involves fabrication, on a trial basis, the vacuum insulation covers for the vacuum insulation tubes, joints, flanges and valves for the 80A pipes, and the heat loss evaluation test for each item. The R and D on the energy supply and utilization techniques involves the heat transfer systems for a variety of fuels by the highly functional heat pump, and compression/absorption hybrid type heat-utilization system. The hybrid type heat-utilization system simulation results suggest possibility of achieving exergy efficiency of 56% as the development target by use of the new medium. The R and D on the environmental load reduction involves the power-saving type heat pump systems which use a natural coolant. (NEDO)

  13. Development of a wind converter and investigation of its operational function. Part 1: Technical description of the wind energy converter

    Science.gov (United States)

    Molly, J. P.; Steinheber, R.

    1982-11-01

    A 10 kW wind energy converter was developed by using as far possible standard serial production parts. The design criteria and the description of the essential machinery components of the MODA 10 wind energy converter are discussed. For some special load cases the safety calculation of the important components is shown. The blade control system which qualified for small wind energy converters, is explained. Weight and cost of the MODA 10 are considered.

  14. 78 FR 46331 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-07-31

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy.... Appointments to the Biomass Research and Development Technical Advisory Committee will be made by the Secretary... Energy is soliciting nominations for candidates to fill vacancies on the Biomass Research and Development...

  15. FY 1999 Technical research and development for environmentally friendly and highly efficient energy utilization system. Technical research and development for highly efficient and effective energy utilization (Technical research and development for optimum system designs - Part 2); 1999 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 2. Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Research and development program is conducted for the elementary techniques as part of the eco-energy urban project of New Sunshine Project. Described herein are the FY 1999 results for the (techniques for transportation and storage of energy). The R and D on methanol energy systems involves the R and D on decomposition and synthesis catalyst of methanol and methyl formate for the waste heat sources of relatively low temperature. The R and D on high-efficiency techniques using hydrogen-occluding alloys involves development of heat exchangers of low sensible heat ratio, fabrication of double-effect type MH heat pump cycle devices, and demonstration tests for the system operation. It is found that the heat output of the hydrogen-occluding alloy for high temperature use is 0.18kW/kg at 90 degrees C, and that the alloy can be massively produced. A thermal utilization efficiency COP of 0.68 is obtained for the double-effect type MH heat pump cycles. The R and D on the heat-hydrogen recovery, transportation and utilization techniques involves designs and fabrication on a trial basis of a sensible heat recovery unit. (NEDO)

  16. Net-Zero Energy Technical Shelter

    DEFF Research Database (Denmark)

    Zhang, Chen; Heiselberg, Per; Jensen, Rasmus Lund

    2014-01-01

    Technical shelters are the basic structures for storing electronic and technical equipment, and commonly used for telecommunication base station, windmill, gas station, etc. Due to their high internal heat load density and special operation schedule, they consume more energy than normal residential...... or commercial buildings. On the other hand, it is a big challenge to power the technical shelter in remote area where the grids are either not available or the expansion of grid is expensive. In order to minimize the energy consumption and obtain a reliable and cost-efficient power solution for technical...... shelter, this study will apply the net-zero energy concept into the technical shelter design. The energy conservation can be achieved by proper design of building envelop and optimization of the cooling strategies. Both experiments and numerical simulations are carried out to investigate the indoor...

  17. Technical Leadership Development Program

    Science.gov (United States)

    2014-04-30

    will be focused on their view of the pros / cons of the ‘how’ they are going about their assigned task as opposed to ‘what’ they are proposing. As...Leadership Style (Y) M4.0 Simula on 1- Leadership Value Proposi on (Y) Some hidden (secret) mo va ons for roles in scenarios/vigne es Develop SWOT

  18. 75 FR 30804 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-06-02

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... public are welcome to observe the business of the Biomass Research and Development Technical Advisory...

  19. 75 FR 11526 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-03-11

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... public are welcome to observe the business of the Biomass Research and Development Technical Advisory...

  20. 75 FR 56525 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-09-16

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... business of the Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or...

  1. FY 1999 Technical research and development for environmentally friendly and highly efficient energy utilization system. Technical research and development for highly efficient and effective energy utilization (Technical research and development for optimum system designs - Part 1); 1999 nendo kankyo chowagata kokoritsu energy riyo system kaihatsu seika hokokusho. 1 Kokoritsu energy yuko riyo gijutsu no kenkyu (saiteki system sekkei gijutsu no kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    Research and development program is conducted for the elementary techniques as part of the eco-energy urban project of New Sunshine Project. Described herein are the FY 1999 results for the 'techniques for recovery and conversion of unutilized energy'. The R and D on waste heat recovery and conversion for chemical plants designs an internal structure of the 'wetted wall column for shell side as the stripping section' for increasing quantity of heat exchanged inside, and stably operates the bench plant for 100 hours or more. The R and D on thermoelectric power generating systems using low calorie exhaust gases involves development of materials, production of fine particle materials and sinters, and evaluation of their functions, among others. The program for application of the techniques to commercial plants confirms applicability of a 3kg thermoelectric power generating system to automobile coating process. The R and D on systems for thermoelectric recovery of low-temperature waste heat finds cracks on the ceramic plate for the power generating system WATT100, disassembled for repair. (NEDO)

  2. 77 FR 64970 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-10-24

    ... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... observe the business of the Biomass Research and Development Technical Advisory Committee. To attend the... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and...

  3. 78 FR 29125 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-05-17

    ... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... public are welcome to observe the business of the Biomass Research and Development Technical Advisory... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and...

  4. TADS: Technical Assistance Development System.

    Science.gov (United States)

    Epting, Rosemary, Ed.

    Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

  5. Direct utilization of geothermal energy: a technical handbook

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, D.N; Lund, J.W. (eds.)

    1979-01-01

    This technical handbook includes comprehensive discussions on nature and occurrence of the geothermal resource, its development, utilization, economics, financing, and regulation. Information on pricing parameters for the direct use of geothermal energy is included as an appendix. (MRH)

  6. Technical Design of Flexible Sustainable Energy Systems

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid.......The paper presents technical designs of potential future flexible energy systems in Denmark, which will be able both to balance production and demand and to secure voltage and frequency requirements on the grid....

  7. 76 FR 22091 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-04-20

    ... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces an open meeting of the Biomass Research and...

  8. 77 FR 6791 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-02-09

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee. The Federal... leading to the production of biobased fuels and biobased products. Tentative Agenda Update on USDA Biomass...

  9. Recommendations for the development of cost minimized combinations of renewable energies - elaborated for four types of model communities in North-Rhine Westphalia. 10. technical report

    International Nuclear Information System (INIS)

    Mohr, M.; Skiba, M.; Gernhardt, D.; Ziolek, A.; Unger, H.

    1994-07-01

    The Tenth Technical Report of the study 'Analysis of Possibilities of Solar Power Supply and its Development in Nordrhein-Westfalen' contains a catalogue of recommended steps for the introduction of renewable energy systems into the existing energy supply structure in NRW. First, strategies for least cost renewable energy supply systems are developed and applied to modelled municipalities in such a way, that a cost optimized mix of renewable energies, depending on the desired degree of 'renewable coverage', can be given for each model community. Analogous to that, a low cost CO 2 -reduction strategy by an aimed extension of renewable energy systems is calculated and represented. The legal skeleton conditions of the power supply, information and training deficits as well as transmitted behavior patterns, which counteract an integration of renewable energy systems, are discussed in view of 'non economical' obstacles also. A catalogue of measures is presented, which contains informational, organizational and especially administrative aspects, including possibilities for governmental support. These recommendations may be used by those responsible for political decisions, i.e. by municipal planners, local or regional power suppliers and - last but not least - private consumers. (orig.) [de

  10. Energy development

    Science.gov (United States)

    Lovich, Jeffrey E.; Jones, L.L.C.; Lovich, R. L.; Halama, K.J.

    2016-01-01

    Large areas of the desert southwest are currently developed or being evaluated for construction of utility-scale renewable energy projects. These projects include numerous solar and wind energy facilities some of which will be massive. Unfortunately, peer-reviewed scientific publications are not yet available to evaluate the potential effects of solar-based utility-scale renewable energy development (USRED) on any species of wildlife, including amphibians and reptiles (herpetofauna). Scientific publications on the effects of wind-based USRED and operation (USREDO) are focused almost exclusively on flying wildlife including birds and bats. To the best of our knowledge the only publications on the effects of wind-based USREDO on herpetofauna are three publications on desert tortoise ecology at a wind energy facility near Palm Springs, California. Those studies suggested that not all effects of USREDO were detrimental in the short-term. However, additional research is required to determine if wind energy operation is compatible with conservation of this long-lived species over longer periods of time.

  11. Cooperation Agreement between the European Organization for Nuclear Research (CERN) and The Qatar Foundation for Education, Science and Community Development concerning Scientific and Technical Co-operation in High Energy Physics

    CERN Document Server

    2016-01-01

    Cooperation Agreement between the European Organization for Nuclear Research (CERN) and The Qatar Foundation for Education, Science and Community Development concerning Scientific and Technical Co-operation in High Energy Physics

  12. Parliamentarian sovereignty and technical development

    International Nuclear Information System (INIS)

    Dreier, H.; Hofmann, J.

    1986-01-01

    The title indicates the points of main emphasis of the contributions, and points to the programme embodied in the volume. The question is - given the tremendous and ever increasing amount of secondary problems associated with a heated technology development - whether the 'sovereign' state is at all capable of controlling, piloting and fostering technic-scientific processes. The first part ('sovereignty and parliamentarian legislator state') concentrates on the history of notions and ideas in the concept of the sovereign, modern state, and on the constitutional law in force (Dreier, Frohn); the current efficiency of parliament as an organ of control in the process of legislation is investigated (Schulze-Fielitz). The central concern of part 2 ('environmental law and technical development') are topical questions of environmental law (Hofmann, Luebbe-Wolff). Besides the analysis of dogmatic problems of a special administrative law, the major issue is whether and in how far - given modern large-scale technologies - law can adequately govern technique (Schmidt). By analyzing the relationship between technical development and possibilities for guidance by a parliamentarian constitutional state, the articles deal with a central point of intersection between state and administrative law. (orig./HP) [de

  13. Renewable energy project development

    Energy Technology Data Exchange (ETDEWEB)

    Ohi, J.

    1996-12-31

    The author presents this paper with three main thrusts. The first is to discuss the implementation of renewable energy options in China, the second is to identify the key project development steps necessary to implement such programs, and finally is to develop recommendations in the form of key issues which must be addressed in developing such a program, and key technical assistance needs which must be addressed to make such a program practical.

  14. Technical descriptions of ten irrigation technologies for conserving energy

    Energy Technology Data Exchange (ETDEWEB)

    Harrer, B.J.; Wilfert, G.L.

    1983-05-01

    Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

  15. Complex Technical Solution for Renewable Energy

    Directory of Open Access Journals (Sweden)

    Cristian Paul Chioncel

    2010-01-01

    Full Text Available This paper presents a complex technical solution for implementing renewable energy, namely: wind, solar photovoltaic and hydraulics. Because wind and solar photovoltaic energy habe a highly random character, it is required to find solution to store the product energy for unfavorable periods, without wind or solar radiations. This could be achieved using the third type of renewable energy, the hydraulic one, obtained from an hydroelectric pumped storage plant (HPSP, located in the imediate vicinity of the wind and solar photovoltaic plant.

  16. Meeting energy demand in a developing economy without damaging the environment. A case study in Sabah, Malaysia, from technical, environmental and economic perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Siong Lee; Lim, Yun Seng [Department of Physical Science, Electrical and Electronic Engineering, Tunku Abdul Rahman University (Malaysia)

    2010-08-15

    The challenges faced by the developing countries are unique in that they need to meet the increasing energy demands for their economic growths at a competitive price without damaging the environments. In this paper, a case study on the electricity demand issue in Sabah, Malaysia, is presented to investigate potential solutions in addressing this current need for a typical developing economy from the technical, economical and environmental perspectives. Sabah, one of the 13 states in Malaysia, is currently experiencing a serious power shortage, especially at the east coast. A 300 MW coal plant is proposed by the electricity utility company. However, the proposal has been rejected in the past several years due to the negative environmental impacts of the plant. In this paper, a number of alternative solutions were evaluated and proposed with respect to the viability of technologies, financial return and minimum environmental impact in terms of GHG emission. (author)

  17. Meeting energy demand in a developing economy without damaging the environment-A case study in Sabah, Malaysia, from technical, environmental and economic perspectives

    International Nuclear Information System (INIS)

    Koh, Siong Lee; Lim, Yun Seng

    2010-01-01

    The challenges faced by the developing countries are unique in that they need to meet the increasing energy demands for their economic growths at a competitive price without damaging the environments. In this paper, a case study on the electricity demand issue in Sabah, Malaysia, is presented to investigate potential solutions in addressing this current need for a typical developing economy from the technical, economical and environmental perspectives. Sabah, one of the 13 states in Malaysia, is currently experiencing a serious power shortage, especially at the east coast. A 300 MW coal plant is proposed by the electricity utility company. However, the proposal has been rejected in the past several years due to the negative environmental impacts of the plant. In this paper, a number of alternative solutions were evaluated and proposed with respect to the viability of technologies, financial return and minimum environmental impact in terms of GHG emission.

  18. Clean Energy Works Oregon Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Andria [City of Portland; Cyr, Shirley [Clean Energy Works

    2013-12-31

    In April 2010, the City of Portland received a $20 million award from the U.S. Department of Energy, as part of the Energy Efficiency and Conservation Block Grant program. This award was appropriated under the American Recovery and Reinvestment Act (ARRA), passed by President Obama in 2009. DOE’s program became known as the Better Buildings Neighborhood Program (BBNP). The BBNP grant objectives directed the City of Portland Bureau of Planning and Sustainability (BPS) as the primary grantee to expand the BPS-led pilot program, Clean Energy Works Portland, into Clean Energy Works Oregon (CEWO), with the mission to deliver thousands of home energy retrofits, create jobs, save energy and reduce carbon dioxide emissions.The Final Technical Report explores the successes and lessons learned from the first 3 years of program implementation.

  19. An Assessment of Need for Developing and Implementing Technical and Skilled Worker Training for the Solar Energy Industry. Final Report.

    Science.gov (United States)

    Orsak, Charles G., Jr.; And Others

    The objective of this project was to determine the need for manpower training in solar energy technology and report it on a regional and/or state basis. Three basic questions were to be answered by the project: (1) Based on a survey of solar heating and cooling systems equipment, what types of systems are being manufactured? (2) What is the…

  20. Using the solar energy by technical photosynthesis

    International Nuclear Information System (INIS)

    Radebold, R.

    1975-01-01

    A system is decribed which makes it possible to copy some of the basic features of photosynthesis with technical means which are available to-day. Hydrazine and hydrogen peroxide are used as energy carrier, whereby hydrazine acts a propellant and hydrogen peroxide as oxidator. The synthesis of the two media is based on nitrogen and water which can, in principle, be taken from the air; nitrogen and water are also the products of the reactions. Liquid alcali metals are the donators of electrons for the synthesis which occurs, as in nature, by the intermediate action of electric energy. (orig.) [de

  1. Solar energy options: Technical economic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Visentin, R

    1982-01-01

    A general system approach on the earth suggests the conversion and distribution of solar energy as electricity, gas, solid and liquid fuels; the historical trend in energy management techniques is in favour of this hard technical proposal, because experience there exists on methods of transmission or transportation of previous kinds of energy vectors mentioned, and small changes in lifestyles toward energy conservation have to be considered in the final uses of the energy. Less hard system technologies will permit direct heat and electricity production close to the channels of energy consumptions; these systems will function as energy savers and their full exploitation implies greater impacts on energy use and lifestyles. As a general trend for government policies as well as for public decision impact on the social decision process, the proliferation of solar systems would permit to produce energy for the 'flowing energetic consumptions' (civil, transportation, agriculture, telecommunications, lighting, etc.) while the not renewable fuels could be properly invested in the production of strategic or durable materials; in this scheme the role of renewable resources is well defined to stabilize the whole civil system in which we are at present organized.

  2. Prospects for coal: technical developments

    Energy Technology Data Exchange (ETDEWEB)

    Kaye, W G; Peirce, T J

    1983-07-01

    This article summarises the reasons for predicting an increase in the use of coal as an industrial energy source in the United Kingdom. The development of efficient and reliable coal-burning techniques is therefore of great importance. Various techniques are then discussed, including conventional combustion systems, fluidised bed combustion systems, fluidised bed boilers and furnaces, coal and ash handling, coal-liquid mixtures, coal gasification and coal liquefaction. (4 refs.)

  3. Electrochemical Energy Storage Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    This U.S. DRIVE electrochemical energy storage roadmap describes ongoing and planned efforts to develop electrochemical energy storage technologies for plug-in electric vehicles (PEVs). The Energy Storage activity comprises a number of research areas (including advanced materials research, cell level research, battery development, and enabling R&D which includes analysis, testing and other activities) for advanced energy storage technologies (batteries and ultra-capacitors).

  4. Technical progress of nuclear energy: economic and environmental prospects

    International Nuclear Information System (INIS)

    Naudet, G.

    1994-01-01

    This document deals with three different aspects of the nuclear energy: first the operating and economic performances of nuclear power plants in the world, the French nuclear competitiveness. Then, the technical and economic perspectives about reactors and fuels cycle and the advantages towards atmospheric pollution are discussed to favour a new worldwide nuclear development. (TEC). 8 refs., 4 figs., 6 tabs

  5. Energy Impact Illinois - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Olson, Daniel [Senior Energy Efficiency Planner; Plagman, Emily [Senior Energy Planner; Silberhorn, Joey-Lin [Energy Efficiency Program Assistant

    2014-02-18

    Energy Impact Illinois (EI2) is an alliance of government organizations, nonprofits, and regional utility companies led by the Chicago Metropolitan Agency for Planning (CMAP) that is dedicated to helping communities in the Chicago metropolitan area become more energy efficient. Originally organized as the Chicago Region Retrofit Ramp-Up (CR3), EI2 became part of the nationwide Better Buildings Neighborhood Program (BBNP) in May 2010 after receiving a $25 million award from the U.S. Department of Energy (DOE) authorized through the American Recovery and Reinvestment Act of 2009 (ARRA). The program’s primary goal was to fund initiatives that mitigate barriers to energy efficiency retrofitting activities across residential, multifamily, and commercial building sectors in the seven-county CMAP region and to help to build a sustainable energy efficiency marketplace. The EI2 Final Technical Report provides a detailed review of the strategies, implementation methods, challenges, lessons learned, and final results of the EI2 program during the initial grant period from 2010-2013. During the program period, EI2 successfully increased direct retrofit activity in the region and was able to make a broader impact on the energy efficiency market in the Chicago region. As the period of performance for the initial grant comes to an end, EI2’s legacy raises the bar for the region in terms of helping homeowners and building owners to take action on the continually complex issue of energy efficiency.

  6. High energy physics research. Final technical report, 1957--1994

    International Nuclear Information System (INIS)

    Williams, H.H.

    1995-01-01

    This is the final technical report to the Department of Energy on High Energy Physics at the University of Pennsylvania. It discusses research conducted in the following areas: neutrino astrophysics and cosmology; string theory; electroweak and collider physics; supergravity; cp violation and baryogenesis; particle cosmology; collider detector at Fermilab; the sudbury neutrino observatory; B-physics; particle physics in nuclei; and advanced electronics and detector development

  7. High energy physics research. Final technical report, 1957--1994

    Energy Technology Data Exchange (ETDEWEB)

    Williams, H.H.

    1995-10-01

    This is the final technical report to the Department of Energy on High Energy Physics at the University of Pennsylvania. It discusses research conducted in the following areas: neutrino astrophysics and cosmology; string theory; electroweak and collider physics; supergravity; cp violation and baryogenesis; particle cosmology; collider detector at Fermilab; the sudbury neutrino observatory; B-physics; particle physics in nuclei; and advanced electronics and detector development.

  8. 78 FR 8500 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-02-06

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... fuels and biobased products. Tentative Agenda: Agenda will include the following: Update on USDA Biomass...

  9. 76 FR 9339 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-02-17

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food.... Tentative Agenda: Agenda will include the following: Update on USDA Biomass R&D Activities. Update on DOE...

  10. Development of the smart photovoltaic system blind and its impact on net-zero energy solar buildings using technical-economic-political analyses

    International Nuclear Information System (INIS)

    Koo, Choongwan; Hong, Taehoon; Jeong, Kwangbok; Ban, Cheolwoo; Oh, Jeongyoon

    2017-01-01

    It is expected that the rooftop photovoltaic (PV) systems can realize net-zero energy solar buildings (nZESBs), but it is not enough by itself. To realize 100% of nZESBs, the smart photovoltaic system blind (SPSB) was proposed to generate electricity in the PV system and to reduce indoor cooling demands through the shading effect in the blind system. Before its implementation, this study aims to investigate the impact of the proposed SPSB on nZESBs, which is conducted in three ways (i.e., technical, economic, and political analyses). The detailed results can be summarized as follows: (i) technical analysis: when applying the SPSB_C_I_G_S_&_2_-_a_x_i_s (which represents the SPSB with the copper-indium-gallium-selenide (CIGS) PV panel and the two-axis tracking system), its energy self-sufficiency rate was determined to be 1.25–2.31 times superior to other alternatives; (ii) economic analysis: in terms of the NPV_2_5 (net present value at year 25), SPSB_C_I_G_S_&_2_-_a_x_i_s was determined to be 1.41–2.97 times superior to others; in terms of the SIR_2_5 (savings-to-investment ratio at year 25), 1.14–1.26 times; and in terms of the break-even point, 1.4–3.0 years; and (iii) political analysis: the grid-connected utilization plan including solar renewable energy certificates (GC_i_n_c_l_._S_R_E_C plan) was determined to improve the economic profitability of the proposed SPSB. - Highlights: • The smart photovoltaic system blind was developed as prototype model in four ways. • The SPSB_C_I_G_S_&_2_-_a_x_i_s was determined to be superior to other prototype models. • A holistic analysis was conducted to evaluate the impact of the SPSB on nZESBs. • When implementing the GC_i_n_c_l_._S_R_E_C plan, the economic profitability was maximized. • Results showed the NPV_2_5 (US$2.37/m"2), SIR_2_5 (2.97 times), and BEP (7.6 years).

  11. The European Bank for Reconstruction and Development in partnership with Lithuania targeting full technical and industrial participation in the development of the energy sector

    International Nuclear Information System (INIS)

    Jahnke, J.

    2000-01-01

    Policy of the European Bank for Reconstruction and Development (EBRD) in Lithuanian energy sector is described. Since 1994 EBRD take active part in financing of safety upgrades of Ignalina NPP. When in 1999 political decision was made to shut down unit 1 of Ignalina NPP EBRD is prepared to take part in co-financing of decommissioning of unit 1. A special fund - International Ignalina decommissioning support fund - was established under the auspice of EBRD recently. Developed countries, international organisation will be contributors to this fund and EBRD will be managing this fund

  12. Energy Efficiency Project Development

    Energy Technology Data Exchange (ETDEWEB)

    IUEP

    2004-03-01

    The International Utility Efficiency Partnerships, Inc. (IUEP) has been a leader among the industry groups that have supported voluntary initiatives to promote international energy efficiency projects and address global climate change. The IUEP maintains its leadership by both supporting international greenhouse gas (GHG) reduction projects under the auspices of the U.S. Department of Energy (DOE) and by partnering with U.S. and international organizations to develop and implement strategies and specific energy efficiency projects. The goals of the IUEP program are to (1) provide a way for U.S. industry to maintain a leadership role in international energy efficiency infrastructure projects; (2) identify international energy project development opportunities to continue its leadership in supporting voluntary market-based mechanisms to reduce GHG emissions; and (3) demonstrate private sector commitment to voluntary approaches to global climate issues. The IUEP is dedicated to identifying, promoting, managing, and assisting in the registration of international energy efficiency projects that result in demonstrated voluntary reductions of GHG emissions. This Final Technical Report summarizes the IUEP's work in identifying, promoting, managing, and assisting in development of these projects and IUEP's effort in creating international cooperative partnerships to support project development activities that develop and deploy technologies that (1) increase efficiency in the production, delivery and use of energy; (2) increase the use of cleaner, low-carbon fuels in processing products; and (3) capture/sequester carbon gases from energy systems. Through international cooperative efforts, the IUEP intends to strengthen partnerships for energy technology innovation and demonstration projects capable of providing cleaner energy in a cost-effective manner. As detailed in this report, the IUEP met program objectives and goals during the reporting period January 1

  13. Clean energy, technical files; Energie propre, les fiches techniques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This document is the compilation of the 42 issues of the 'Energie propre - Maitrise de la Demande d'Energie' newsletter published between September 1996 and July 1999 by the regional energy agency of Provence-Alpes-Cote d'Azur region (ARENE). Each issue is a technical file presenting a particular action or study carried out in the framework of the program of mastery of energy demand in Provence-Alpes-Cote d'Azur region (SE France). These studies and actions concern various types of buildings: high schools, residential buildings for old people, office buildings, social buildings, hotels, recreational facilities, and cover all aspects of energy conservation: space heating, lighting systems, ventilation systems, thermal insulation, appliances.. (J.S.)

  14. Clean energy, technical files; Energie propre, les fiches techniques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This document is the compilation of the 42 issues of the 'Energie propre - Maitrise de la Demande d'Energie' newsletter published between September 1996 and July 1999 by the regional energy agency of Provence-Alpes-Cote d'Azur region (ARENE). Each issue is a technical file presenting a particular action or study carried out in the framework of the program of mastery of energy demand in Provence-Alpes-Cote d'Azur region (SE France). These studies and actions concern various types of buildings: high schools, residential buildings for old people, office buildings, social buildings, hotels, recreational facilities, and cover all aspects of energy conservation: space heating, lighting systems, ventilation systems, thermal insulation, appliances.. (J.S.)

  15. Renewable Energy Project Development Assistance (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-07-01

    This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

  16. Technical guidance for siting criteria development

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.; Diegert, K.; Ostmeyer, R.M.; Ritchie, L.T.; Strip, D.R.; Johnson, J.D.; Hansen, K.; Robinson, J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness.

  17. Technical guidance for siting criteria development

    International Nuclear Information System (INIS)

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness

  18. Technical development in the city gas business

    Energy Technology Data Exchange (ETDEWEB)

    Kondo, Takehiko

    1988-07-01

    This paper reports on technical developments in the city gas business. Energy demand is expected to increase by only 1.3 over the 1986 to 1995 period. Also, the importance of complex energy is increasing. As a result, limited demand entails more violent competition among various energy industries (electricity, gas, oil, etc.). Such trend is calling for a new system that flexibly meets the needs of the present society. Household-purpose city gas accounts for more than 90% of all the city gas. One of the means to increase city gas demand is to encourage people to use gas-type room heating/cooling systems to enrich citizen life and ease difficulties during the power-consumption peak period. Anothe important factor is to develop a system, such as a cogeneration system, that flexibly applies to heat and electricity balance. Pipeline construction and maintenance costs account for most of the gas-related costs. One of the attempts to reduce such costs is the development of a small-section or non-digging pipe-laying technique and a diagnostic robot. Large computers are already in use in total information management. To ensure security, people concerned have made much progress in upgrading the performance of and spreading sensors for carbon monoxide and other gases. To eliminate all accidents, they have also developed an automatic cut-off method in case of an abnormal efflux. This method is expected to spread in the future. They have also developed an LNG cold heat utilization technique and a by-product carbon fiber. (2 figs)

  19. Technical assistance for Meharry Medical College Energy Efficiency Project. Final project status and technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-08

    This report presents the results of a program to provide technical assistance to Meharry Medical College. The purpose of the program is to facilitate Meharry`s effort to finance a campus-wide facility retrofit. The US Department of Energy (USDOE) funded the program through a grant to the Tennessee Department of Economic and Community Development (TECD). The University of Memphis-Technology and Energy Services (UM-TES), under contract to TECD, performed program services. The report has three sections: (1) introduction; (2) project definition, financing, and participants; and (3) opportunities for federal participation.

  20. Clean Energy Innovation: Sources of Technical and Commercial Breakthroughs

    Energy Technology Data Exchange (ETDEWEB)

    Perry, T. D., IV; Miller, M.; Fleming, L.; Younge, K.; Newcomb, J.

    2011-03-01

    Low-carbon energy innovation is essential to combat climate change, promote economic competitiveness, and achieve energy security. Using U.S. patent data and additional patent-relevant data collected from the Internet, we map the landscape of low-carbon energy innovation in the United States since 1975. We isolate 10,603 renewable and 10,442 traditional energy patents and develop a database that characterizes proxy measures for technical and commercial impact, as measured by patent citations and Web presence, respectively. Regression models and multivariate simulations are used to compare the social, institutional, and geographic drivers of breakthrough clean energy innovation. Results indicate statistically significant effects of social, institutional, and geographic variables on technical and commercial impacts of patents and unique innovation trends between different energy technologies. We observe important differences between patent citations and Web presence of licensed and unlicensed patents, indicating the potential utility of using screened Web hits as a measure of commercial importance. We offer hypotheses for these revealed differences and suggest a research agenda with which to test these hypotheses. These preliminary findings indicate that leveraging empirical insights to better target research expenditures would augment the speed and scale of innovation and deployment of clean energy technologies.

  1. Comparative social-technical analysis of arrangements for the reduction of energy poverty situations, and development of targeted intervention strategies. Final report

    International Nuclear Information System (INIS)

    Beslay, Christophe; Gournet, Romain; Zelem, Marie-Christine; Vidal, Marion; Huze, Marie-Helene; Cyssau, Rene; Ducrocq, Vincent; Menard, Francois; Cherel, Didier

    2010-03-01

    This study aimed at comparing different existing arrangements which have been implemented to reduce energy poverty. This comparison is based on an analysis of their actor configurations, and on their influence on the elaboration of implemented actions. It aimed at determining to which extent strategies and abilities could be complemented or are limited, and at identifying conditions of efficiency for implemented actions. This analysis also took four important issues into account: financial resources, housing energetic status and equipment, practices and representations of comfort and of energy, and arrangements for the struggle against energy poverty. Five arrangements, actions or programs have been compared: three implemented in three different French districts (Haute-Savoie, Gers and Tarn), one implemented in the Quebec province in Canada, and one implemented in the French Guyana. The comparison is made in terms of definitions and perceptions of energy poverty, of arrangement implementation, of household reception mode, of complexity of energy poverty situations, and of results of technical visits to households. The second part of the report makes some recommendations and proposals for the creation of a local intervention service for energy management

  2. Canadian energy supply and demand 1993 - 2010: Technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-01

    The National Energy Board has since 1959 prepared and maintained projections of energy supply requirements and has from tine to time published reports on them. The objectives of this report are to provide a comprehensive `all energy` market analysis and outlook to service as a standard of reference for all parties interested in Canadian energy issues; to provide a framework for public discussion on emerging energy issues of national importance and to monitor the prospects for the supply, demand and price of natural gas in Canada pursuant to the Market-Based Procedure for regulating. The focus of the technical report provides detailed descriptions of the analytical methods used and the quantitative results. The quantitative analysis will be of value to users who wish to develop their own views of prospects or to have a detailed assessment of the impact of alternative assumptions. 106 tabs., 171 figs.

  3. Canadian energy supply and demand 1993 - 2010: Technical report

    International Nuclear Information System (INIS)

    1994-12-01

    The National Energy Board has since 1959 prepared and maintained projections of energy supply requirements and has from tine to time published reports on them. The objectives of this report are to provide a comprehensive 'all energy' market analysis and outlook to service as a standard of reference for all parties interested in Canadian energy issues; to provide a framework for public discussion on emerging energy issues of national importance and to monitor the prospects for the supply, demand and price of natural gas in Canada pursuant to the Market-Based Procedure for regulating. The focus of the technical report provides detailed descriptions of the analytical methods used and the quantitative results. The quantitative analysis will be of value to users who wish to develop their own views of prospects or to have a detailed assessment of the impact of alternative assumptions. 106 tabs., 171 figs

  4. Technical leadership development: Speeding up the process

    International Nuclear Information System (INIS)

    Bilger, W.T.; Shropshire, J.C.; Coleman, S.L.; Collins, R.

    1993-01-01

    This paper describes the Applied Engineering Fundamentals Course, a 14-week course designed for newly hired U.S. Department of Energy (DOE) engineers and scientists who will assume oversight responsibilities at technically complex facilities. This course includes formal education and training, an applications course in the field, and rotational assignments

  5. Technical Leadership Development Program-Year 3

    Science.gov (United States)

    2012-08-30

    be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT...NASA6, Nokia , BAE Systems, the DoD, and the Australian government to develop our initial competency model. These models were discussed in deliverable...UNCLASSIFIED 17 solutions to pursue and why they should be built. 2. Help teams solve technical problems holistically, overcoming technical and non

  6. Technical and Non-Technical Issues towards the Commercialisation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez

    , it then determines the stages where there is a gap in research, and lastly, it analyses the identified key subjects. Accordingly, the thesis elaborates on seven areas: . i. It examines regulatory frameworks for wave energy developments and how they affect project execution. . ii. It investigates the role...... are of relevance to successfully reach the commercialisation of WECs and need attention from the sector as such, not least from device developers. The thesis is presented in two parts: a main introduction and a collection of papers. The first part provides a brief history of wave energy, introduces the research...... topic, describes the different disciplines addressed in the thesis and relates them. The eight papers comprise the core part of the work. The papers address the research topic in different ways: from a legal, social, technical and economic viewpoint, and from various WEC development stages. All...

  7. Nuclear Energy Center Site Survey, 1975. Part III. Technical considerations

    International Nuclear Information System (INIS)

    1976-01-01

    Studies of the technical feasibility of nuclear energy centers (NECs) and the comparison between NEC technical feasibility and that of nuclear facilities on dispersed sites are reviewed. The conclusions related to technical feasibility of NEC are summarized. Technical feasibility was found to rest mainly on five major issues: heat dissipation, transmission, facility construction, radiological impact, and environmental impact. Although general conclusions can be reached in these five areas, it is recognized that they are interdependent, and detailed site-by-site analysis will be necessary. Some general conclusions on technical feasibility of NECs are presented, then detailed conclusions derived from the technical evaluation of NECs compared to dispersed site facilities are presented. The findings of this study on each of the five major feasibility issues are then discussed in sequence. The study concludes that nuclear energy centers, as defined herein, are technically feasible

  8. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  9. Technical development of fuel alcohol

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    Research and development of a technology for biologically manufacturing alcohol from agricultural and forestry wastes has been conducted according to an eight year-program beginning in 1983. This paper presents the findings in FY 1987 and the future schedule. Exploration and breeding of superior bacteria are the basic subject through the eight years. In FY 1987, preparation and evaluation of hybrid plasmids into which Zymomonas, BETA-glucosidase gene and CM case gene are inserted, improvement of variation to enhance the salt resistance of Zymomonas and screening of Cm-and Sm-resistant bacteria to develop thermophilic, anaerobic cellulose were made. In addition, the total process combining the cell adhesion method as the immobilization technique with the flash technique is continuously studied. Improvement of the salt-resistance of Zymomonas by increasing the density with photosetting resin, the upper concentration of alcohol and effect of pulverzing treatment in a small apparatus were investigated. A test plant was designed and constructed. (3 photos.)

  10. Technical Feasibility Study for Zero Energy K-12 Schools

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldwasser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Torcellini, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States); Studer, Daniel [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-11-01

    This technical feasibility study provides documentation and research results supporting a possible set of strategies to achieve source zero energy K-12 school buildings as defined by the U.S. Department of Energy (DOE) zero energy building (ZEB) definition (DOE 2015a). Under this definition, a ZEB is an energy-efficient building in which, on a source energy basis, the actual annual delivered energy is less than or equal to the on-site renewable exported energy.

  11. Cuban energy development perspectives

    International Nuclear Information System (INIS)

    Berdellans Escobar, Ilse; Perez Martin, David; Lopez Lopez, Ileana; Ricardo Mora, Henry; Gomez De la Torre, Yoandys

    2005-01-01

    In this paper from energy demand scenario calculated for the country until 2025, energy supply options were assessed. Three energy development scenarios considering economic and social development projections and different energy options were evaluated: a reference scenario which includes the nowadays energy development projections; a second scenario basing the development on intensive use of domestic fossil fuels; and a third scenario, where the development is based on the maximum use of domestic renewable energy potential. The results are analyzed and recommendations are formulated

  12. Low energy demonstration accelerator technical area 53

    International Nuclear Information System (INIS)

    1996-01-01

    As part of the Department of Energy's (DOE) need to maintain the capability of producing tritium in support of its historic and near-term stewardship of the nation's nuclear weapons stockpile, the agency has recently completed a Programmatic Environmental Impact Statement for Tritium Supply and Recycling. The resulting Record of Decision (ROD) determined that over the next three years the DOE would follow a dual-track acquisition strategy that assures tritium production for the nuclear weapon stockpile in a rapid, cost effective, and safe manner. Under this strategy the DOE will further investigate and compare two options for producing tritium: (1) purchase of an existing commercial light-water reactor or irradiation services with an option to purchase the reactor for conversion to a defense facility; and (2) design, build, and test critical components of a system for accelerator production of tritium (APT). The final decision to select the primary production option will be made by the Secretary of Energy in the October 1998 time frame. The alternative not chosen as the primary production method, if feasible, would be developed as a back-up tritium supply source. This Environmental Assessment (EA) analyzes the potential environmental effects that would be expected to occur if the DOE were to design, build, and test critical prototypical components of the accelerator system for tritium production, specifically the front-end low-energy section of the accelerator, at Los Alamos National Laboratory. The Low Energy Demonstration Accelerator (LEDA) would be incrementally developed and tested in five separate stages over the next seven years. The following issues were evaluated for the proposed action: utility demands, air, human health, environmental restoration, waste management, transportation, water, threatened and endangered species, wetlands, cultural resources, and environmental justice

  13. Promotion of technical cooperation in the field of energy

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jung Kyung; Jung, Duk Yung; Suh, Seong Seog; Park, Myung Nam; Kim, Young Mi; Cho, Moo Kyung [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    This study aims to improve the quality of human resources and the capability of research and development through the promotion of technical cooperation with foreign energy organizations possessing advanced technologies, and at the same time to contribute to internationalizing energy technology through the active involvement in multilateral technical cooperation programs with international organizations. To attain these aims, practical cooperative relations has been strengthened with 34 organizations from 11 countries including 6 organizations with which new cooperative agreements has been concluded in 1995 from the USA, Australia, China, and Russia, through the promotion of the continuous exchange of information and personnel, and international joint projects. And also the positive participation in technical cooperation programs and research projects organized or sponsored by APEC, IEA, UNDP, UNESCO, WEC has been made. In addition, for the improvement in research capability, 200 researchers has been dispatched abroad for the presentation of papers, of for the discussion of joint research projects, and 30 foreign experts through diverse overseas personnel exchange programs including Brain Pool Program were invited for the contribution of advancing research projects. (author). 8 figs., 15 tabs.

  14. Technical and Non-Technical Issues Towards the Commercialisation of Wave Energy Converters

    DEFF Research Database (Denmark)

    Chozas, Julia Fernandez

    . As a result, the thesis first identifies the phases that generally appear within WEC developments, it then determines the stages where there is a gap in research, and lastly, it analyses the identified key subjects. Accordingly, the thesis elaborates on seven areas: i. It examines regulatory frameworks...... and a collection of papers. The first part provides a brief history of wave energy, introduces the research topic, describes the different disciplines addressed in the thesis and relates them. The eight papers comprise the core part of the work. The papers address the research topic in different ways: from a legal......, social, technical and economic viewpoint, and from various WEC development stages. All the analyses are carried out from the perspective of device developers. The understanding of WEC developments has been central to the outline of the thesis, as it has formed the framework of the work. The developments...

  15. Geothermal energy development in Colorado. Appendix 7 of regional operations research program for development of geothermal energy in the Southwest United States. Final technical report, June 1977--August 1978

    Energy Technology Data Exchange (ETDEWEB)

    Pearl, Richard A.; Coe, Barbara

    1979-01-01

    The term ''geothermal energy'' is a term that means different things to different people. To an increasing number, it means a practical, environmentally compatible energy resource that can, right now, help to relieve an overdependency upon fossil fuels. The potential for use of geothermal energy in Colorado seems to be substantial. As described by Barrett and Pearl (1978), at least 56 separate areas have surface manifestations of hydrothermal (hot water) resources. These areas are estimated to contain 5.914 quads (5.914 x 10{sup 15} Btu) of energy, with extractable energy of 1.48 quads. Geothermal resources already contribute to Colorado's energy supply. In fact, since the early 1900's, practical uses of geothermal resources have been common in Pagosa Springs, in Southwest Colorado. Residents there have used hot-water wells to heat numerous buildings, including the County Court House, schools, churches, the newspaper office, a liquor store, 2 hotels, 2 service stations, a drugstore, and a bank, as well as for the swimming pool and spa. Where resources are in use in other parts of the State, most are used for swimming pools or baths. A few wells or springs serve other purposes, among them space heating and agriculture, including greenhouses, a fish farm and algae-growing. Seemingly, interest in and awareness of the resources is growing. If leases and permits are made available, along with some economic incentives, some or all of the three potential power-generation sites may be developed by private industry. Perhaps with the assistance of federal programs, initially, lower temperature resources, too, will be developed by private industry. While government can provide opportunities, the outcome depends upon the decisions of numerous individuals throughout the system. Colorado does have geothermal resources that can contribute to the energy supply. It remains to be seen whether these resources will fulfill their promise.

  16. Technical features to enhance proliferation resistance of nuclear energy systems

    International Nuclear Information System (INIS)

    2010-01-01

    It is generally accepted that proliferation resistance is an essential issue for the continued development and sustainability of nuclear energy. Several comprehensive assessment activities on the proliferation resistance of the nuclear fuel cycle have previously been completed, notably the International Nuclear Fuel Cycle Evaluation (INFCE) carried out under the auspices of the IAEA, and the Non-proliferation Alternative Systems Assessment Program (NASAP) review carried out by the USA. There have been, however, relatively few comprehensive treatments of the issue following these efforts in the 1970s. However, interest in and concern about this issue have increased recently, particularly because of greater interest in innovative nuclear fuel cycles and systems. In 2000, the IAEA initiated the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) and the US Department of Energy initiated the Generation IV International Forum (GIF). These projects are aimed at the selection and development of concepts of innovative nuclear energy systems and fuel cycles. Proliferation resistance is one of the fundamental considerations for both projects. In this context, the IAEA in 2001 initiated a study entitled 'Technical Aspects of Increasing Proliferation Resistance of the Nuclear Fuel Cycle'. This task is not intended as an effort to assess the merits of a particular fuel cycle system for the future, but to describe a qualitative framework for an examination of the proliferation resistance provided by the intrinsic features of an innovative nuclear energy system and fuel cycle. This task also seeks to provide a high level survey of a variety of innovative nuclear energy systems and fuel cycles with respect to that framework. The concept of proliferation resistance is considered in terms of intrinsic features and extrinsic measures. The intrinsic features, sometimes referred to as the physical/technical aspects, are those features that result from the

  17. Economic Reform Orchestra And Technical Manpower Development ...

    African Journals Online (AJOL)

    The study examined economic reform issues in Nigeria since 1986 and the impact on technical manpower development in Rivers State in particular. Two sets of structured questionnaire were used to elicit responses from target respondents who ultimately comprised 105 instructors and 340 final year students in the four ...

  18. Integrating ethical and technical considerations in the energy debate

    International Nuclear Information System (INIS)

    Pickering, G.W.

    1980-01-01

    A study being carried out by the author on analyzing and integrating ethical and technical considerations in formulating an energy policy for the United States, with special emphasis on nuclear issues, is reviewed. Beginning with an overview of the historical development of the American nuclear program and the emergence of an organized politcal opposition to that program, seven outstanding issues are identified: institutional adequacy, radiation, reactor safety, waste disposal, economics and reliability, international consequences, and alternative energy sources, and an attempt is made to identify the range of dispute in relation to each. A framework is proposed for analyzing these issues by introducing guidelines for defining a social justice problem. Suggestions are made about how to get morally serious about such issues, and this framework is applied to four issues: radiation, reactor safety, waste disposal, and institutional adequacy. Ultimately it is a political choice whether or not to include nuclear power in a nations's energy policy. It is important, however, that such choices be made using the best technical and ethical assessments of the consequences. (LL)

  19. General Merchandise 50% Energy Savings Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E.; Leach, M.; Hirsch, A.; Torcellini, P.

    2009-09-01

    This report documents technical analysis for medium-box general merchandise stores aimed at providing design guidance that achieves whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  20. 2011 Residential Energy Efficiency Technical Update Meeting Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-11-01

    This report provides an overview of the U.S. Department of Energy Building America program's Summer 2011 Residential Energy Efficiency Technical Update Meeting. This meeting was held on August 9-11, 2011, in Denver, Colorado, and brought together more than 290 professionals representing organizations with a vested interest in energy efficiency improvements in residential buildings.

  1. National Energy Strategy: Technical annex 7

    International Nuclear Information System (INIS)

    1992-01-01

    This paper provides analyses of nuclear energy options and the role of nuclear power as a future energy source for the United States. The Current Policy Base case reflects an energy future with no new nuclear policy initiatives and the gradual phaseout of nuclear power. This paper compares such a phaseout to the expanded use of nuclear power and identifies the consequences

  2. Technical development of industry for 30 years

    International Nuclear Information System (INIS)

    2009-01-01

    This book mentions the history for 30 years since 1979 on industrial technology, which records change of system and environment of industrial technology development, like economical and social environment, industrial technology policy, support system on technical development and enterprise institute, assignment for future and product of industrial technology by field such as electric electronic, information and communications, machine material and fiber chemistry, and the way which Korea industrial technology association walked on.

  3. Energy Economic Data Base (EEDB) Program. Technical Reference Book

    International Nuclear Information System (INIS)

    Allen, R.E.; Benedict, R.G.; Hodson, J.S.

    1983-09-01

    Purpose of the program is to develop current technical and cost information for nuclear and comparison electric power generating stations. Purpose of this Technical Reference Book is to provide the current technical design bases for each of the technical data models updated in the Sixth Update (1983). It contains a set of detailed system design descriptions for these technical data models, which are supplemented with engineering drawings. The system design descriptions reflect regulatory and industry practice and experience for nuclear and coal-fired power generating stations that are current for January 1, 1983

  4. WIND ENERGY CONVERSION SYSTEMS - A TECHNICAL REVIEW

    Directory of Open Access Journals (Sweden)

    N. RAMESH BABU

    2013-08-01

    Full Text Available Wind power production has been under the main focus for the past decade in power production and tremendous amount of research work is going on renewable energy, specifically on wind power extraction. Wind power provides an eco-friendly power generation and helps to meet the national energy demand when there is a diminishing trend in terms of non-renewable resources. This paper reviews the modeling of Wind Energy Conversion Systems (WECS, control strategies of controllers and various Maximum Power Point Tracking (MPPT technologies that are being proposed for efficient production of wind energy from the available resource.

  5. 76 FR 36102 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-06-21

    ... vacancies on the Biomass Research and Development Technical Advisory Committee (Technical Advisory Committee..., 2008, H.R. 6124]. FCEA section 9008(d) establishes the Biomass Research and Development Technical... committee are ineligible for nomination. Appointments to the Biomass Research and Development Technical...

  6. 77 FR 42298 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-07-18

    ... Biomass Research and Development Technical Advisory Committee (Technical Advisory Committee). DATES: The... 9008(d) established the Biomass Research and Development Technical Advisory Committee and lays forth... nomination. Appointments to the Biomass Research and Development Technical Advisory Committee will be made by...

  7. Energy investment in developing countries

    International Nuclear Information System (INIS)

    Rovani, Y.

    1982-01-01

    The developing countries are likely to represent the fastest growing component of the global energy demand over the next two decades. The paper presents considerations based on the World Bank's approach to the energy sector in these countries. It is considered that an accelerated development of conventional indigenous sources of energy is absolutely vital if developing countries are to attain a satisfactory rate of economic growth. The cost of the energy investment, the power sector issues, the optimal use of the resources, the role of the external financing and the need of technical assistance are reviewed. One emphasizes the role of the World Bank in analyzing and preparing projects, and in mobilizing financing from other official and commercial sources

  8. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - GIS analysis Franches Montagnes, Switzerland - Documentation of GIS concepts, methods and results

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, F.; Schaffner, B. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report presents part of the development work carried out by the Swiss meteorology specialists of the company METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The series of reports describes the development and use of a basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. This report documents the use of the Geographic Information Systems (GIS) methodology for the 'Franches Montagnes' Region in Switzerland, whereby the most significant of the model's layers was found to be the wind velocity layer.

  9. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - Digital relief analysis - Abstract of work package 7

    Energy Technology Data Exchange (ETDEWEB)

    Schaffner, B.; Cattin, R. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report presents an abstract of the development work carried out by the Swiss meteorology specialists METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The series of reports describes the development and use of a basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. This report presents an abstract of the work done as part of the Work Package 7 of the Alpine Windharvest project.

  10. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - Alpine Space wind map - Modeling approach

    Energy Technology Data Exchange (ETDEWEB)

    Schaffner, B.; Remund, J. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report presents describes the development work carried out by the Swiss meteorology specialists of the company METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The series of reports describes the development and use of a basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. This report discusses two modelling approaches investigated for use in the definition of a wind map for the alpine area. The method chosen and its application are discussed. The various sources of information for input to the model are listed and discussed.

  11. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - CFD modelling evaluation - Summary of WindSim CFD modelling procedure and validation

    Energy Technology Data Exchange (ETDEWEB)

    Schaffner, B.; Cattin, R. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report presents the development work carried out by the Swiss meteorology specialists of the company METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The report describes the development of a basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. The report deals with the use of computational fluid dynamics and wind simulation modelling techniques and their validation. Recommendations on the use of the results are made.

  12. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - GIS analysis methodology - Workbook and results

    Energy Technology Data Exchange (ETDEWEB)

    Daellenbach, F.; Schaffner, B. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report presents the development work carried out by the Swiss meteorology specialists of the company METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The report describes the development of basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. The report deals with the use of Geographic Information Systems (GIS) methodology, which includes three steps: the identification of limiting factors for wind power production, the compilation of a GIS layer for each of these factors and, thirdly, their aggregation into a result layer. The methodology was implemented for four case studies in Austria, Italy, Slovenia and Switzerland.

  13. The technical use of solar energy

    International Nuclear Information System (INIS)

    Hahne, E.

    1993-01-01

    For all considerations on energy, information on energy-quantity and energy-value is necessary. Such information is presented for Germany as an example for an industrialized country. The application of solar heat for an Institute building is presented for a pilot project at the University Stuttgart. With unglazed solar collectors, a flooded pebble-bed store and a heat pump, about 60% of the Institute's heat demand can be supplied by solar energy. With the experience gained from this project, large district heating systems are designed for two different locations in Germany under differing conditions. For solar assisted house heating and domestic hot water, heat costs are obtained which are about twice the present heat cost in Germany. If solar energy assists domestic hot water production and house heating, costs can be achieved which are below present conventional heat cost. In addition, it will also reduce air pollution. (author). 9 figs., 6 tabs

  14. Development of technical information processing system (VII)

    International Nuclear Information System (INIS)

    Kim, Tae Whan; Choi, Kwang; Oh, Jeong Hoon; Jeong, Hyun Sook; Keum, Jong Yong

    1995-12-01

    The goal of this project is to establish integrated environment focused on enhanced information services to researchers through the providing of acquisition information, key phrase retrieval function, journal content information linked with various subsystems already developed. The results of the project are as follows. 1. It is possible to serve information on unreceivable materials among required materials throughout the system. 2. Retrieval efficiency is increased by the adding of key phrase retrieval function. 3. Rapidity of information service is enhanced by the providing of journal contents of each issue received and work performance of contents service is become higher. 4. It is possible to acquire, store, serve technical information needed in R and D synthetically and systematically throughout the development of total system linked with various subsystems required to technical information management and service. 21 refs. (Author)

  15. Nuclear energy: technical, economical and ecological data

    International Nuclear Information System (INIS)

    Anon.

    1975-04-01

    This information document aims to present all the different aspects of nuclear energy and the economic, industrial and ecological data from which the French nuclear energy programme was worked out, the techniques and the sites were chosen. Prepared with the collaboration of experts from the public services interested, this document attempts to cover all the questions raised and to provide answers (dependence with respect to oil versus the advantages of nuclear energy, environment and siting problems, consequences for public health and radiation protection, organization of nuclear industry [fr

  16. Regional energy assessment - Technical Guidebook nr. 1

    International Nuclear Information System (INIS)

    Leroy, Jean

    2015-01-01

    This publication indicates and describes how a regional energy assessment is to be performed. Some general aspects and features are first addressed: conversion coefficients, climate correction. Then, its describes how final consumptions of the different consuming sectors are to be addressed: industry with its nomenclature of activities, transport, housing, office building, agriculture. Final consumptions of the different energy products are then addressed: solid mineral fuels (in industry and other sectors), oil products (different types of fuels), natural gas, heat, electricity. Regional statistical sources are indicated for electric power, natural gas, oil, renewable energies, industry, and sectors as a whole

  17. Solar energy emplacement developer

    Science.gov (United States)

    Mortensen, Michael; Sauls, Bob

    1991-01-01

    A preliminary design was developed for a Lunar Power System (LPS) composed of photovoltaic arrays and microwave reflectors fabricated from lunar materials. The LPS will collect solar energy on the surface of the Moon, transform it into microwave energy, and beam it back to Earth where it will be converted into usable energy. The Solar Energy Emplacement Developer (SEED) proposed will use a similar sort of solar energy collection and dispersement to power the systems that will construct the LPS.

  18. Impact of energy conservation policy measures on innovation, investment and long-term development of the Swiss economy. Results from the computable induced technical change and energy (CITE) model - Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bretschger, L.; Ramer, R.; Schwark, F.

    2010-09-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) presents the results of a study made on the Computable Induced Technical Change and Energy (CITE) model. The authors note that, in the past two centuries, the Swiss economy experienced an unprecedented increase in living standards. At the same time, the stock of various natural resources declined and the environmental conditions changed substantially. The evaluation of the sustainability of a low energy and low carbon society as well as an optimum transition to this state is discussed. An economic analysis is made and the CITE and GCE (Computable General Equilibrium) numerical simulation models are discussed. The results obtained are presented and discussed.

  19. Energy saving in the design and operation of fans; The development of technical literature for the specification of fume extraction systems

    Energy Technology Data Exchange (ETDEWEB)

    Gibbons, A [Plastic Fabrications and Environmental Technology Ltd., Armagh, Northern Ireland (United Kingdom)

    1995-12-01

    The processes involved in producing technical literature to assist in the selection of fans are discussed. Desktop publishing has been found to provide an effective method of matching the detail of the literature to the needs of the customer. (author)

  20. Technical reference book for the Energy Economic Data Base (EEDB) Program

    International Nuclear Information System (INIS)

    1985-08-01

    The Energy Economic Data Base (EEDB) Program is sponsored by the US Department of Energy (DOE) for the purpose of developing current technical and cost information for nuclear and comparison electric power generating stations. The data base was first assembled in 1978 from an initial update of the technical/cost data models developed for the predecessor studies. Seven updates of the data base have been performed between 1978 and 1984, in which various technical/cost data models have been updated, added, superceded or discontinued

  1. Energy flow models for the estimation of technical losses in distribution network

    International Nuclear Information System (INIS)

    Au, Mau Teng; Tan, Chin Hooi

    2013-01-01

    This paper presents energy flow models developed to estimate technical losses in distribution network. Energy flow models applied in this paper is based on input energy and peak demand of distribution network, feeder length and peak demand, transformer loading capacity, and load factor. Two case studies, an urban distribution network and a rural distribution network are used to illustrate application of the energy flow models. Results on technical losses obtained for the two distribution networks are consistent and comparable to network of similar types and characteristics. Hence, the energy flow models are suitable for practical application.

  2. Large Hospital 50% Energy Savings: Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Studer, D.; Parker, A.; Pless, S.; Torcellini, P.

    2010-09-01

    This Technical Support Document documents the technical analysis and design guidance for large hospitals to achieve whole-building energy savings of at least 50% over ANSI/ASHRAE/IESNA Standard 90.1-2004 and represents a step toward determining how to provide design guidance for aggressive energy savings targets. This report documents the modeling methods used to demonstrate that the design recommendations meet or exceed the 50% goal. EnergyPlus was used to model the predicted energy performance of the baseline and low-energy buildings to verify that 50% energy savings are achievable. Percent energy savings are based on a nominal minimally code-compliant building and whole-building, net site energy use intensity. The report defines architectural-program characteristics for typical large hospitals, thereby defining a prototype model; creates baseline energy models for each climate zone that are elaborations of the prototype models and are minimally compliant with Standard 90.1-2004; creates a list of energy design measures that can be applied to the prototype model to create low-energy models; uses industry feedback to strengthen inputs for baseline energy models and energy design measures; and simulates low-energy models for each climate zone to show that when the energy design measures are applied to the prototype model, 50% energy savings (or more) are achieved.

  3. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - Digital relief analysis - Abstract of work package 7; Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - Digitale Relief-Analyse - Zusammenfassung von Arbeitspaket 7

    Energy Technology Data Exchange (ETDEWEB)

    Schaffner, B.; Cattin, R. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report describes the development work carried out by the Swiss meteorology specialists METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The series of reports describes the development and use of a basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. This report presents a summary of work done on the digital relief analysis used in various stages of the project, its validation and use.

  4. Technical and economic feasibility of thermal energy storage. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, D.R.

    1976-02-01

    This study provides a first-look at the system elements involved in: (1) creating a market; (2) understanding and deriving the requirements; (3) performing analytical effort; (4) specifying equipment; and (5) synthesizing applications for a thermal energy storage (TES) function. The work reviews implicated markets, energy consumption patterns, TES technologies, and applications. Further, several concepts are developed and evaluated in some detail. Key findings are: (1) there are numerous technical opportunities for TES in the residential and industrial market sectors; (2) apart from sensible heat storage and transfer, significant R and D is required to fully exploit the superior heat densities of latent heat-based TES systems, particularly at temperatures above 600/sup 0/F; (3) industrial energy conservation can be favorably impacted by TES where periodic or batch-operated unit functions characterize product manufacturing processes, i.e. bricks, steel, and ceramics; and (4) a severe data shortage exists for describing energy consumption rates in real time as related to plant process operations--a needed element in designing TES systems.

  5. Technical considerations in materials management policy development

    International Nuclear Information System (INIS)

    Avci, H.; Goldberg, M.

    1996-01-01

    Under the Materials-in-Inventory (MIN) initiative, US DOE intends to develop policies to ensure that materials are managed and use efficiently, cost-effectively, and safely throughout DOE. The MIN initiative covers depleted uranium, scrap metals, chemicals, explosives, spent nuclear fuel, lead, alkali metals, etc.; by far the largest component is depleted uranium hexafluoride (DUF6). A technically defensible approach has been developed and is being used to select a long-term management strategy for DOE's DUF6 inventory. The same approach can be adapted to management of other materials in inventory that have the potential to be reutilized

  6. Wind energy centre at Mithapur, Gujarat, India. Technical report

    International Nuclear Information System (INIS)

    Van Hulle, F.; Van der Borg, N.; Prasad, N.S.; Suresh, R.; Rajsekhar, B.

    1997-07-01

    The report describes the design and set-up of a Wind Energy Centre in Gujarat. This Wind Energy Centre has to provide a reliable delivery of a range of development and technical quality assurance services to the wind energy industry in northern India. Infrastructural and organizational requirements of the centre have been defined as per the demands expressed by the industry. This include, site and land, building, equipment - hardware/software, manpower, etc. A suitable site has been identified on the western coast of Gujarat (in the vicinity of Mithapur). Based on the feedback from the industry and keeping in mind the possibilities and state-of-the-art followed in intemationally accepted centres, a range of activities including research and development, support to indigenisation, testing and certification, as well as training have been addressed. Facilities include the following: (1) Test site: test pads, building, roads, power collection system, meteo-towers etc; (2) Mobile test equipment: basic measurement sets, transportable meteo-towers, auxiliary equipment; and (3) Blade test facility: building, foundation, loading and measuring facilities. At full capacity the centre will employ approximately 20 people. 3 figs., 4 tabs

  7. Technical energy savings versus changes in human behaviour

    DEFF Research Database (Denmark)

    Nørgaard, Jørgen

    1996-01-01

    Energy savings seems to be the most environmentally benign element in an energy policy. The paper is a reflection on the work on saving energy both by improving technology and by adapting human daily behaviour. A simple model is suggested for the energy chain which converts the primary energy all...... the way into human satisfaction via energy services. Results of various analyses and field experiments show saving potentials for electricity of 50 - 80 per cents. Barriers for implementing these technical saving options are discussed. Also the necessity and potentials for changing behavioural or life...

  8. Technical reference book for the Energy Economic Data Base (EEDB) Program

    International Nuclear Information System (INIS)

    Allen, R.E.; Benedict, R.G.; Hodson, J.S.

    1984-09-01

    The Energy Economic Data Base (EEDB) Program is sponsored by the US Department of Energy (DOE) for the purpose of developing current technical and cost information for nuclear and comparison electric power generating stations. The EEDB contains a variety of nuclear and coal-fired power plant technical data models. Each of these data models is a complete and detailed conceptual design for a single unit, commercial, steam electric, power generating station located on a standard hypothetical Middletown site. A major effort for the Sixth Update (1983) has been the updating of the system design descriptions and selected engineering drawings for the technical data models. This update took the form of revising and expanding the system design descriptions and engineering drawings contained in the Base Data Studies, to include the technical information developed and recorded in the first five EEDB updates. The results of the update effort are contained in this EEDB Program Technical Reference Book

  9. Nuclear instrument maintenance and technical training in Nuclear Energy Unit

    International Nuclear Information System (INIS)

    Mohamad Nasir Abdul Wahid

    1987-01-01

    Instrument maintenance service is a necessity in a Nuclear Research Institute, such as the Nuclear Energy Unit (NEU) to ensure the smooth running of our research activities. However, realising that maintenance back-up service for either nuclear or other scientific equipment is a major problem in developing countries such as Malaysia, NEU has set up an Instrumentation and Control Department to assist in rectifying the maintenance problem. Beside supporting in house activities in NEU, the Instrumentation and Control Department (I and C) is also geared into providing services to other organisations in Malaysia. This paper will briefly outline the activities of NEU in nuclear instrument maintenance as well as in technical training. (author)

  10. Technical Support for the development of DCS

    International Nuclear Information System (INIS)

    Oh, In Seok; Lee, Cheol Kwon; Kim, Dong Hoon; Kim, Jung Taek; Hwang, In Koo; Park, Jae Chang; Lee, Dong Young; Park, Won Man

    2008-05-01

    The objective of this project is to provide a technical support to Woori Tech Co. in its design and manufacture process of the DCS as a part of KNICS development program to promote the technology self-reliance for non-safety equipment for NPPs(Nuclear Power Plants). We support Woori Tech Co. to develop a DCS which satisfies the requirements for Shinkori 3 and 4 NPPs in the aspects of reliability, applicability and technical competitiveness. As the results of this project the following items were developed and/or implemented; · Design basis and requirements for a DCS system · Design requirements for control communication networks · Architecture of control networks · Design requirements of EWS(Engineering Workstation) · Plan of software verification and validation · Operation display design · Soft control functions · Application development tools of DCS · Analysis and V/V activities on DCS control network protocols · Software verification and validation and documentation guidelines · User manual documents

  11. Technical Support for the development of DCS

    Energy Technology Data Exchange (ETDEWEB)

    Oh, In Seok; Lee, Cheol Kwon; Kim, Dong Hoon; Kim, Jung Taek; Hwang, In Koo; Park, Jae Chang; Lee, Dong Young; Park, Won Man

    2008-05-15

    The objective of this project is to provide a technical support to Woori Tech Co. in its design and manufacture process of the DCS as a part of KNICS development program to promote the technology self-reliance for non-safety equipment for NPPs(Nuclear Power Plants). We support Woori Tech Co. to develop a DCS which satisfies the requirements for Shinkori 3 and 4 NPPs in the aspects of reliability, applicability and technical competitiveness. As the results of this project the following items were developed and/or implemented; {center_dot} Design basis and requirements for a DCS system {center_dot} Design requirements for control communication networks {center_dot} Architecture of control networks {center_dot} Design requirements of EWS(Engineering Workstation) {center_dot} Plan of software verification and validation {center_dot} Operation display design {center_dot} Soft control functions {center_dot} Application development tools of DCS {center_dot} Analysis and V/V activities on DCS control network protocols {center_dot} Software verification and validation and documentation guidelines {center_dot} User manual documents.

  12. Energy and Sustainable Development

    International Nuclear Information System (INIS)

    2013-01-01

    None of the eight Millennium Development Goals (MDGs) adopted by the United Nations in 2000 directly addressed energy, although for nearly all of them - from eradicating poverty and hunger to improving education and health - progress has depended on greater access to modern energy. Thirteen years later, energy is being given more attention. The target date for the MDGs is 2015, and in 2012 the UN began deliberations to develop sustainable development goals to guide support for sustainable development beyond 2015. The Future We Want, the outcome document of the 2012 United Nations Conference on Sustainable Development (also known as Rio+20) gives energy a central role: ''We recognize the critical role that energy plays in the development process, as access to sustainable modern energy services contributes to poverty eradication, saves lives, improves health and helps provide for basic human needs''

  13. Final Technical Report_Clean Energy Program_SLC-SELF

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, Glenn; Coward, Doug

    2014-01-22

    This is the Final Technical Report for DOE's Energy Efficiency and Conservation Block Grant, Award No. DE-EE0003813, submitted by St. Lucie County, FL (prime recipient) and the Solar and Energy Loan Fund (SELF), the program's third-party administrator. SELF is a 501(c)(3) and a certified Community Development Financial Institution (CDFI). SELF is a community-based lending organization that operates the Clean Energy Loan Program, which focuses on improving the overall quality of life of underserved populations in Florida with an emphasis on home energy improvements and cost-effective renewable energy alternatives. SELF was launched in 2010 through the creation of the non-profit organization and with a $2.9 million Energy Efficiency and Conservation Block (EECBG) grant from the U.S. Department of Energy (DOE). SELF has its main office and headquarters in St. Lucie County, in the region known as the Treasure Coast in East-Central Florida. St. Lucie County received funding to create SELF as an independent non-profit institution, outside the control of local government. This was important for SELF to create its identity as an integral part of the business community and to help in its quest to become a Community Development Financial Institution (CDFI). This goal was accomplished in 2013, allowing SELF to focus on its mission to increase energy savings while serving markets that have struggled to find affordable financial assistance. These homeowners are most impacted by high energy costs. Energy costs are a disproportionate percentage of household expenses for low to moderate income (LMI) households. Electricity costs have been steadily rising in Florida by nearly 5% per year. Housing in LMI neighborhoods often includes older inefficient structures that further exacerbate the problem. Despite the many available clean energy solutions, most LMI property owners do not have the disposable income or equity in their homes necessary to afford the high upfront cost

  14. Energy and development

    Energy Technology Data Exchange (ETDEWEB)

    Gururaja, J.

    1980-03-15

    The developing countries will require higher per capita energy for improving the quality of life. This paper examines the goals and strategies for development vis-a-vis those of the developed countries. Crucial issues in India are listed. The role of technology in the utilization of energy is discussed. Difficulties in choosing the technology are pointed out. The problem of integrating several alternative energy sources in villages is mentioned. Environmental issues are considered. (DLC)

  15. Plus energy house. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Yde, L.

    1996-05-01

    A description of a demonstration project, located near Viborg in Denmark, involving a 400 m{sup 2} house with low energy consumption which has a 200 m{sup 2} living/working area, a 240 m{sup 2} mobile insulated glass facade and a solar greenhouse of 200 m{sup 2} which in addition to plant production can be used for recreational purposes. Humidity in the greenhouse is regulated by heat pumps condensing the water-laden air and thus producing hot water for space heating. The heat pumps maintain a 70% relative humidity in the greenhouse and surplus heat to the amount of 300 kWh/m{sup 2} of glass facade area is produced annually. Excess heat to the amount of 75.000 kWh is available for space heating in adjoining houses. The glazed roof of the house and greenhouse is constructed of two layers of tempered glass. The 20 cm space between the layers, when filled with polystyrene beads, provides thermal insulation equal to that of traditionally insulated outer house-walls. The beads can be sucked in and out of the roof space and can also be used for shading during the summer. It is concluded that the house (400 m{sup 2}) consumes the same quantity of energy as houses of a similar size and at the same time produces 300 kWh/m{sup 2} p.a. with the glass south facade, corresponding to what a solar collector produces per m{sup 2}. (AB)

  16. Sustainable energy development

    International Nuclear Information System (INIS)

    Afgan, N.; Al Gobaisi, D.; Carvalho, M.; Cumo, M.

    1998-01-01

    It is shown that present energy strategy requires adaptation of new criterions to be followed in the future energy system development. No doubt that there is a link between energy consumption and environment capacity reduction. This is an alarming sign, which recently has become the leading theme for our near and distant future. Modern engineering science has to be oriented to those areas which may directly assist in our future energy planning. In this respect, it is demanding need that our attention be oriented to the global aspect og the energy development. Modern technology will help to adopt essential principles of the sustainable energy development. With the appropriate renewable energy resources introduction in our energy future and with the increase of safety of nuclear energy, it will be possible to comply with the main principles to be adapted in the sustainable energy strategy. in order to promote the sustainable energy development the respective education system is required. It was recognized that the present energy education system can not meet future demand for the knowledge dissemination. It was shown that the potential option for the future education system is the distance learning with multimedia telematic system. (authors). 46 refs, 14 figs, 1 tab

  17. Technical Co-operation between developing countries

    International Nuclear Information System (INIS)

    2001-01-01

    In the plan of activities of the project Int/0/060 Technical Cooperation Between Developing Countries a Workshop on Public Awareness Promotional Literature was included with the purpose of preparing public and professional awareness literature and to develop a strategy which would enable Tissue Banks to present their mission to their public,professional health workers and clinical users.To identify the information to be provided to potential donors about the value of the donation.To prepare instructions to be given to potential users about the various types of grafts available.To develop a strategy wi ch would enable Tissue Banks to present themselves to their public and tissue users

  18. CAISSE (Computer Aided Information System on Solar Energy) technical manual

    Energy Technology Data Exchange (ETDEWEB)

    Cantelon, P E; Beinhauer, F W

    1979-01-01

    The Computer Aided Information System on Solar Energy (CAISSE) was developed to provide the general public with information on solar energy and its potential uses and costs for domestic consumption. CAISSE is an interactive computing system which illustrates solar heating concepts through the use of 35 mm slides, text displays on a screen and a printed report. The user communicates with the computer by responding to questions about his home and heating requirements through a touch sensitive screen. The CAISSE system contains a solar heating simulation model which calculates the heating load capable of being supplied by a solar heating system and uses this information to illustrate installation costs, fuel savings and a 20 year life-cycle analysis of cost and benefits. The system contains several sets of radiation and weather data for Canada and USA. The selection of one of four collector models is based upon the requirements input during the computer session. Optimistic and pessimistic fuel cost forecasts are made for oil, natural gas, electricity, or propane; and the forecasted fuel cost is made the basis of the life cycle cost evaluation for the solar heating application chosen. This manual is organized so that each section describes one major aspect of the use of solar energy systems to provide energy for domestic consumption. The sources of data and technical information and the method of incorporating them into the CAISSE display system are described in the same order as the computer processing. Each section concludes with a list of future developments that could be included to make CAISSE outputs more regionally specific and more useful to designers. 19 refs., 1 tab.

  19. Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

    2009-09-28

    This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  20. Energy for sustainable development

    International Nuclear Information System (INIS)

    Toepfer, Klaus

    2003-01-01

    Considerations about 'post-Kyoto' targets and other ways to achieve the objectives of the Protocol are critical. Scientific evidence presented by the IPCC in its third assessment in 2002 clearly indicates the need not only to implement the Protocol, but also to agree on further emission reductions in the medium term in order to keep changes in the world's climate at a manageable level. UNEP's Energy Programme addresses the environmental consequences of energy production and use, such as global climate change and local air pollution. UNEP assists decision makers in government and the private sector to make better, more informed energy choices, which fully integrate environmental and social costs. Since UNEP is not an implementing organization, its role as facilitator is core. The majority of UNEP's energy activities link to mitigation - the reduction of greenhouse gas emissions - but these are generally accompanied by broader objectives related to energy and sustainable development. This includes climate change mitigation, but not as the sole objective since many of UNEP's partners in developing countries have more immediate development objectives. UNEP's main programmes are: The Solar and Wind Energy Resource Assessment (SWERA) project, that provides solar and wind resource data and geographic information assessment tools to public and private sector executives who are involved in energy market development; A new Global Environment Facility (GEF) funded programme aiming at promoting industrial energy efficiency through a cleaner production/environmental management system framework. A parallel programme, Energy Management and Performance Related Energy Savings Scheme (EMPRESS), supports energy efficiency efforts in Eastern and Central Europe; The Mediterranean Renewable Energy Programme promotes the financing of renewable energy projects in the Mediterranean basin; The Rural Energy Enterprise Development (REED) seeks to develop new sustainable energy enterprises

  1. Energy for sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Toepfer, Klaus [United Nations Environment Programme (Kenya)

    2003-09-01

    Considerations about 'post-Kyoto' targets and other ways to achieve the objectives of the Protocol are critical. Scientific evidence presented by the IPCC in its third assessment in 2002 clearly indicates the need not only to implement the Protocol, but also to agree on further emission reductions in the medium term in order to keep changes in the world's climate at a manageable level. UNEP's Energy Programme addresses the environmental consequences of energy production and use, such as global climate change and local air pollution. UNEP assists decision makers in government and the private sector to make better, more informed energy choices, which fully integrate environmental and social costs. Since UNEP is not an implementing organization, its role as facilitator is core. The majority of UNEP's energy activities link to mitigation - the reduction of greenhouse gas emissions - but these are generally accompanied by broader objectives related to energy and sustainable development. This includes climate change mitigation, but not as the sole objective since many of UNEP's partners in developing countries have more immediate development objectives. UNEP's main programmes are: The Solar and Wind Energy Resource Assessment (SWERA) project, that provides solar and wind resource data and geographic information assessment tools to public and private sector executives who are involved in energy market development; A new Global Environment Facility (GEF) funded programme aiming at promoting industrial energy efficiency through a cleaner production/environmental management system framework. A parallel programme, Energy Management and Performance Related Energy Savings Scheme (EMPRESS), supports energy efficiency efforts in Eastern and Central Europe; The Mediterranean Renewable Energy Programme promotes the financing of renewable energy projects in the Mediterranean basin; The Rural Energy Enterprise Development (REED) seeks to develop new

  2. Cyclotron Development and Technical Aspects on Accelerator Based Laboratory Development

    International Nuclear Information System (INIS)

    Sunarhadijoso

    2000-01-01

    BATAN is planning to establish an accelerator-based laboratory at P3TM Yogyakarta as an effort in the development and use of accelerator technology for improving industrial performance and public welfare. This paper reviews several aspects of cyclotron technology and describes the combination of a linear accelerator - cyclotron system as an alternative to be considered in the planing of the laboratory. The progress of cyclotron technology is discussed covering three generations, i.e. conventional cyclotron, synchrocyclotron and AVF cyclotron generations. The planning should not consider the accelerator application for radioisotope production because it is established in Serpong with the existing negative ion cyclotron. The proposed facility at P3TM may comprise two linear accelerators coupled with a positive ion cyclotron of synchrocyclotron generation. In fact, the attachment of the synchrocyclotron unit is flexible and it can be installed subsequently if the higher energy particle beam, which can not be produced by the linear accelerators, is extremely needed. Some technical aspects related to ion beam application, building construction and infrastructure, human resources, and specification of function test are discussed for additional information in the implementation of the planning. (author)

  3. S. E. A. Clam. Vol. 3E. Technical appraisal. [Wave energy converter

    Energy Technology Data Exchange (ETDEWEB)

    1983-06-01

    A detailed technical appraisal of the wave energy device known as a 'Celam' is presented by a team of Consultants. The scheme assessed is a 2 GW array based off the coast of Skye. The cost of energy from such an array is assessed both by the Consultants and by the development team and the discrepancies between the two discussed.

  4. Clean Energy for Development

    OpenAIRE

    Wolfowitz, Paul

    2006-01-01

    Paul Wolfowitz, President of the World Bank, in the development community, the interaction of energy, environment, and poverty have emerged as a central challenge. Lack of consistent electricity in developing countries is a severe obstacle to doing business. It is also affecting school attendance, particularly among girls. Inefficient energy sources can also pose health problems—as many as 1.6 million deaths per year due to indoor smoke. Rich and poor countries alike need to apply energy-effi...

  5. Technical definition for nearly zero energy buildings nZEB

    DEFF Research Database (Denmark)

    Kurnitski, Jarek; Allard, Francis; Braham, Derrick

    or maximum harmonized requirements as well as details of energy performance calculation framework, it will be up to the Member States to define what these for them exactly constitute. In the definition local conditions are to be obviously taken into account, but the uniform methodology can be used in all......This REHVA Task Force proposes a technical definition for nearly zero energy buildings required in the implementation of the Energy performance of buildings directive recast. Energy calculation framework and system boundaries associated with the definition are provided to specify which energy flows...... in which way are taken into account in the energy performance assessment. The intention of the Task Force is to help the experts in the Member States in defining the nearly zero energy buildings in a uniform way. The directive requires nearly zero energy buildings, but since it does not give minimum...

  6. Energy, environment and development

    Energy Technology Data Exchange (ETDEWEB)

    El-Hinnawi, E

    1977-01-01

    Energy is one of the most important prerequisites of life. The growing socio-economic activities and the rising standard of living have led to a rapid increase in energy consumption. The limited resources of fossil fuels and the recent geopolitical developments activated the exploration of ways and means for energy conservation and exploitation of unconventional renewable sources of energy. Of the renewable energy sources (geothermal, solar, tidal, hydropower, etc), hydro-power production has some potential environmental effects. Man-made lakes have several physical, biological, geochemical and biogeochemical impacts on the environment both in the area of the lake and downstream. From the socio-economic point of view, the harnessing of renewable sources of energy will not only lead to the enhancement of the human environment, particularly in remote rural areas in developing countries, but will also lead to substantial savings in the use of non-renewable sources of energy.

  7. Tuna cannery energy conservation interventions: Technical/economic feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Florio, G. (Calabria Univ. Arcavacata di Rende (Italy). Dipt. di Meccanica)

    An energy audit was conducted on a 230,000 can (x 80 g)/day tuna cannery to determine where technically and economically feasible energy savings interventions could be made. The plant is equipped with an oil fired boiler which supplies steam for cooking and sterilization purposes. In the energy/cost analysis, it was found that the most significant and cost effective energy savings could be obtained by the substitution of the four sterilization chambers with three sets of twin sterilization/heat exchange chambers.

  8. Glossary of scientific and technical terms in atomic energy

    International Nuclear Information System (INIS)

    1986-01-01

    In order to facilitate the task of Arabic speaking scientists in the field of nuclear energy, the Atomic Energy Commission of Syria assigned a committee constituted of leading physicists and chemists at Damascus University, the aim of the commission was to include the Arabic equivalent of the terms cited in English, French, Russian and Spanish in the glossary published by the United Nations, 1958 ''Atomic Energy Glossary of Technical Terms.'' The result of the committee's work was this glossary containing approximately 6000 terms in the field of nuclear energy which are given in Arabic, English, French, Russian and Spanish

  9. Internet - Technical Developments and Applications 2

    CERN Document Server

    Tkacz, Ewaryst; Rostanski, Maciej

    2012-01-01

    The unusual direct progress of civilization in many fields concerning technical sciences is being observed in the period of last two decades. Experiencing extraordinary dynamics of the development of technological processes, particularly in ways of communicating, makes us believe that  the information society is coming into existence. Having the information in today’s world of changing attitudes and socio-economic conditions can be perceived as one of the most important advantages. The content of this book is divided into four parts: ·         Mathematical and technical fundamentals, ·         Information management systems and project management ·         Information security and business continuity management ·         Interdisciplinary problems This monograph has been prepared to contribute in a significant way to the success of implementing consequences of human imagination  into social life. The authors believe that this monograph will influence the further technol...

  10. Developing energy in Africa

    International Nuclear Information System (INIS)

    Favennec, J.P.

    2004-01-01

    Energy and economic growth are connected and the wealth of Western countries is based on a high availability of energy. Africa is a continent vast by its size, well populated and well supplied with fossil energy (oil, gas, coal) and renewable energy (hydroelectric, biomass, solar). But consumption is limited, without distribution infrastructures and initially, without capitals for necessary investments. The situation is particularly critical in Sub-Sahara Africa since the African energy consumption is mainly concentrated in South Africa and North Africa. An annual conference, the Energy Summit in Africa, brings together all players in the sector, from all the continent's countries, from Europe and America, in an attempt to establish recommendations for more availability and a better use of energy in Africa. The next summit is scheduled for November 23 to 25, 2004 in Dakar. The program relies on the Association for the Development of Energy in Africa, which will be created shortly. (author)

  11. Inertial fusion energy development strategy

    International Nuclear Information System (INIS)

    Coutant, J.; Hogan, W.J.; Nakai, S.; Rozanov, V.B.; Velarde, G.

    1995-01-01

    The research and development strategy for inertial fusion energy (IFE) is delineated. The development strategy must indicate how commercial IFE power can be made available in the first part of the next century, by which is meant that a Demonstration Power Plant (DPP) will have shown that in commercial operation IFE power plants can satisfy the requirements of public and employee safety, acceptably low impact on the environment, technical performance, reliability, maintainability and economic competitiveness. The technical issues associated with the various required demonstrations for each of the subsystems of the power plant (target, driver, reaction chamber, and remainder of plant (ROP) where the tritium for future targets is extracted and thermal energy is converted into electricity) are listed. The many developments required to make IFE commercially available can be oriented towards a few major demonstrations. These demonstrations do not necessarily each need separate facilities. The goals of these demonstrations are: (i) ignition demonstration, to show ignition and thermonuclear burn in an ICF target and determine the minimum required driver conditions; (ii) high gain demonstration, to show adequate driver efficiency-gain product; (iii) engineering demonstrations, to show high pulse rate operations in an integrated system and to choose the best designs of the various reactor systems; (iv) commercial demonstrations, to prove safe, environmentally benign, reliable, economic, near-commercial operation. In this document the present status of major inertial confinement research activities is summarized including a table of the major operating or planned facilities. The aspects involved in each of the required demonstrations are discussed. Also, for each of the subsystems mentioned above the technical developments that are needed are discussed. The document ends with a discussion of the two existing detailed IFE development plans, by the United States and Japan. 9

  12. LMFBR technical development: achievements and prospects

    International Nuclear Information System (INIS)

    Hennies, H.H.; Nicholson, R.L.R.; Rapin, M.

    1986-10-01

    The recent commissioning of the SUPERPHENIX prototype (1200MWe), which is the outcome of a tight cooperation between several European partners, demonstrates the technical feasibility of industrial size Fast Breeder Reactors (FBR) and gives to Europe the leading part in FBR development. This achievement relies on studies which started more than 30 years ago and which have been marked by various realizations in European countries. Taking into account the slowing down of major nuclear programmes throughout the world and the resulting reduction of natural uranium needs the commercial deployment of LMFBRs does not appear presently necessary before the beginning of next century: this delay has to be used to work out a reactor model which will be economically attractive. The importance of efforts which remain to be carried out to achieve this goal, notably for what concern R and D, justifies the strengthening of the European cooperation and the extension of its scope to FBR fuel cycle activities. (author)

  13. Technical development of fluid machinery area

    International Nuclear Information System (INIS)

    Chung, Kyung Nam; Kim, Jin Young; Kim, Yang Ik

    2008-01-01

    In this paper, recent research activity of Hyundai Heavy Industries in the fluid machinery area is introduced. Technical development has been carried out in pumps, turbines, construction equipment, side thrusters, engine lubrication flow, etc. Here the technology of pumps and cooling of construction equipment will be dealt with. We have actively used computational fluid dynamics in the performance analysis of pump models and the design of new models of various industrial pumps or marine pumps. And a cooling analysis system composed of 3D flow analysis and 1D cooling analysis has been established, and applied to the design of cooling systems of new models of excavators and wheel loaders. The above mentioned technology is presented in details, and some future works are mentioned

  14. Technical and commercial aspects of MHTGR development

    International Nuclear Information System (INIS)

    Northup, T.E.; Simon, W.A.; Wistrom, J.D.

    1992-01-01

    The Modular High Temperature Gas-Cooled Reactor (MHTGR) is under development by industry and the U.S. Department of Energy (DOE). Passive safety and design simplicity make the MHTGR an attractive option for future nuclear power generation, but deployment faces many challenges. Economic competitiveness, public acceptance, licensing approval and first-of-a-kind (FOAK) development funding represent some of the prerequisites to commercialization. Successful commercialization hinges on a prototype and a subsequent Lead Plant Project. (author)

  15. Energy efficiency system development

    Science.gov (United States)

    Leman, A. M.; Rahman, K. A.; Chong, Haw Jie; Salleh, Mohd Najib Mohd; Yusof, M. Z. M.

    2017-09-01

    By subjecting to the massive usage of electrical energy in Malaysia, energy efficiency is now one of the key areas of focus in climate change mitigation. This paper focuses on the development of an energy efficiency system of household electrical appliances for residential areas. Distribution of Questionnaires and pay a visit to few selected residential areas are conducted during the fulfilment of the project as well as some advice on how to save energy are shared with the participants. Based on the collected data, the system developed by the UTHM Energy Team is then evaluated from the aspect of the consumers' behaviour in using electrical appliances and the potential reduction targeted by the team. By the end of the project, 60% of the participants had successfully reduced the electrical power consumption set by the UTHM Energy Team. The reasons for whether the success and the failure is further analysed in this project.

  16. Developments in high energy physics

    International Nuclear Information System (INIS)

    Mukhi, Sunil; Roy, Probir

    2009-01-01

    This non-technical review article is aimed at readers with some physics background, including beginning research students. It provides a panoramic view of the main theoretical developments in high energy physics since its inception more than half a century ago, a period in which experiments have spanned an enormous range of energies, theories have been developed leading up to the standard model, and proposals - including the radical paradigm of string theory - have been made to go beyond the standard model. The list of references provided here is not intended to properly credit all original work but rather to supply the reader with a few pointers to the literature, specifically highlighting work done by Indian authors. (author)

  17. Method for assessment of the technical potential of the plant agricultural waste suitable for energy purposes in Bulgaria

    International Nuclear Information System (INIS)

    Georgiev, V.

    2004-01-01

    A method for assessment of technical potential of quantitatively important plant agriculture waste; straw from wheat and barley; corn stalks; sunflower stalks and heads; tobacco stalks; orchard prunings and vineyard prunings suitable for energy purposes for Bulgarian conditions is developed. Data for assessment of the technical potential for 2002 using this method are presented. A comparison between technical potential of mentioned wastes, final energy consumption in agriculture and all branches of Bulgarian economy for 2002 is made. (author)

  18. Brick industry: Technical and economic assessment of energy saving measures

    Energy Technology Data Exchange (ETDEWEB)

    Florio, G.; Romeo, G. (Calabria Univ., Arcavacata di Rende (Italy). Dipt. di Meccanica)

    Starting from a detailed energy analysis of the production cycle of bricks, the authors make a technical and economic assessment of any possible measure aimed at rationalizing energy. They take energy conservation into consideration not only through the use of exhausted oil residues, but also through the employment of a turboalternator or an internal combustion engine for cogeneration. Both applications of cogeneration prove to be highly interesting from an economic viewpoint even though the turboalternator is put at a disadvantage in competing with internal combustion engines since it increases the overall cogeneration plant costs with respect to the latter.

  19. Technical and economic assessment of energy conversion technologies for MSW

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, W.R.

    2002-07-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW.

  20. Technical and economic assessment of energy conversion technologies for MSW

    International Nuclear Information System (INIS)

    Livingston, W.R.

    2002-01-01

    Thermal processes for municipal solid wastes (MSW) based on pyrolysis and/or gasification that have relevance to the emerging UK market are described in this report, and the results of the technical and economical assessment of these processes are presented. The Mitsui R21 Technology, the Thermoselect Process, the Nippon Steel Waste Melting Process, the Pyropleq Process, and the Compact Power Process are selected for detailed comparison on the basis of the overall technical concept, the energy balance and the requirements for consumables, environmental performance, and the technical and commercial status of the technology. Details are also given of a comparison of the novel thermal technologies with conventional mass burn incineration for MSW

  1. Technical progress faced with the challenges of the energy sector in the future

    International Nuclear Information System (INIS)

    Maillard, D.

    1999-01-01

    The colloquium organised by the Association of Energy Economists dealing with the theme 'Technical progress faced with the challenges of the energy sector in the future' takes place against a backdrop of ever-increasing initiatives in this field, for example at the World Energy Council or the International Energy Agency Faith in technical progress is widespread but should be supported by studies without any preconceived ideas. Research and development efforts must be fully supported, and in a climate of opening markets and liberalization the public authorities have a major role to pay. Historically, the markets have always been able to meet new needs thanks to technology, but the ambitious targets that the international community has set itself regarding the emission of greenhouse gases imply technical improvements and major investments. (authors)

  2. Technical Support Document: 50% Energy Savings Design Technology Packages for Medium Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Lane, Michael D.; Rosenberg, Michael I.; Liu, Bing

    2009-09-01

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Medium Offices (AEDG-MO or the Guide), a design guidance document which intends to provide recommendations for achieving 50% energy savings in medium office buildings that just meet the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  3. Energy, sustainability and development

    International Nuclear Information System (INIS)

    Llewellyn Smith, Ch.

    2006-01-01

    The author discusses in a first part the urgent need to reduce energy use (or at least curb growth) and seek cleaner ways of producing energy on a large scale. He proposes in a second part what must be done: introduce fiscal measures and regulation to change behavior of consumers, provide incentives to encourage the market to expand use of low carbon technologies, stimulate research and development by industry and develop the renewable energies sources. In a last part he looks what part can fusion play. (A.L.B.)

  4. Energy, sustainability and development

    Energy Technology Data Exchange (ETDEWEB)

    Llewellyn Smith, Ch

    2006-07-01

    The author discusses in a first part the urgent need to reduce energy use (or at least curb growth) and seek cleaner ways of producing energy on a large scale. He proposes in a second part what must be done: introduce fiscal measures and regulation to change behavior of consumers, provide incentives to encourage the market to expand use of low carbon technologies, stimulate research and development by industry and develop the renewable energies sources. In a last part he looks what part can fusion play. (A.L.B.)

  5. Energy, technology, development

    Energy Technology Data Exchange (ETDEWEB)

    Goldemberg, J [Ministerio da Educacao, Brasilia (Brazil)

    1992-02-01

    Energy and technology are essential ingredients of development, it is only through their use that it became possible to sustain a population of almost 5 billion on Earth. The challenges to eradicate poverty and underdevelopment in developing countries in the face of strong population increases can only be successfully met with the use of advanced technology, leapfrogging the path followed in the past by today's industrialized countries. It is shown in the paper that energy consumption can be decoupled from economic development. Such possibility will contribute significantly in achieving sustainable development. 10 refs., 4 figs., 3 tabs.

  6. Energy, environment and sustainable rural development

    Energy Technology Data Exchange (ETDEWEB)

    Best, G [Food and Agriculture Organization of the United Nations, Rome (Italy)

    1992-12-01

    This paper addresses the energy needs of the three quarters of the World's population living in the rural populations of many developing countries whose daily struggle to obtain the energy needed for survival is unaffected by international energy politics. It aims to identify energy-related actions in certain policy and technical areas which may contribute to ending rural poverty. The mutual benefits of a transition to modern technologies is stressed both for rural and urban groups, especially in terms of a more efficient use of fossil fuels and renewable energy sources such as biomass or solar power. Recommendations for sustainable rural and agricultural development are made. (UK)

  7. Vacuum boilers developed heating surfaces technic and economic efficiency evaluation

    Science.gov (United States)

    Slobodina, E. N.; Mikhailov, A. G.; Semenov, B. A.

    2018-01-01

    The vacuum boilers as manufacturing proto types application analysis was carried out, the possible directions for the heating surfaces development are identified with a view to improving the energy efficiency. Economic characteristics to evaluate the vacuum boilers application efficiency (Net Discounted Income (NDI), Internal Rate of Return (IRR), Profitability Index (PI) and Payback Period) are represented. The given type boilers application technic and economic efficiency criteria were established. NDI changing curves depending on the finning coefficient and operating pressure were obtained as a result of the conducted calculation studies.

  8. Analysis Of Human Capital Development In Technical Colleges In ...

    African Journals Online (AJOL)

    The study assessed the human capital development in Technical Colleges in Imo State of Nigeria. All the Technical Colleges in the State participated in the study. Results showed low enrollment in the Colleges. There was gender inequity in the enrollment as only 59 females (1.97%) enrolled in the Technical Colleges.

  9. Fault localization technics in energy and communication cables. Fehlerortungstechnik in Energie- und Nachrichtenkabeln

    Energy Technology Data Exchange (ETDEWEB)

    Bartz, W G; Wippler, E

    1981-01-01

    Though fault localization technics in energy and information cables represents a special field within electrical engineering or electrical measurement engineering its significance becomes visible when fault-localization technics is seen with the same eyes as energy supply or information exchange. To maintain supply and exchange disturbance free, e.g. by means of continuous or periodical monitoring or to restore them quickly in case of disturbance is the task of fault localization technics. This new volume shall give a survey on the network structures in energy and communication networks, on the types and frequency of past interruptions and also on procedures to evaluate interruptions statistically. Methods, procedures and measurement techniques of fault-localization technics are presented for usual communication and energy cables as well as for optical communication cables.

  10. Energy-related inventions program invention 637. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-31

    The final technical report for the Pegasus plow, a stalk and root embedding apparatus, describes progress from the development stage to the product support stage. The US Department of Agriculture - Agriculture Research Service (ARS) is now in the second year of a three year study comparing the Pegasus to conventional tillage. So far, no downside has been with the Pegasus and the following benefits have been documented: (1) Energy savings of 65.0 kilowatt hours per hectare over conventional tillage. This is when the Pegasus plow is used to bury whole stalks, and represents a 70% savings over conventional tillage (92.5 kilowatt hours per hectare). (2) Four to seven fewer passes of tillage, depending on the particular situation. This represents a substantial time savings to farmers. (3) So far, no differences in cotton yields. Recent cotton boll counts in one study indicate a higher yield potential with the Pegasus. (4) No disease problems. (5) Significantly higher levels of organic matter in the soil. A hypothesis of the study is that whole stalk burial may reduce plant disease problems. This hypothesis has not yet been proven. (6) Significantly higher levels of nitrate nitrogen. Total nitrogen and ammonia nitrogen trended higher but were not significantly different. This shows that whole stalk burial does not adversely affect the nitrogen cycle in the soil and may actually improve it. The marketing support stage of the project is also described in the report.

  11. Regional operation research program for development of geothermal energy in the southwest United States. Final technical report, June 1977--August 1978

    Energy Technology Data Exchange (ETDEWEB)

    Marlin, J.M; Christ, R.; McDevitt, P.; Nowotny, K.; O' Dea, P.; Rao, C.R.; Swanberg, C.

    1979-01-01

    This report describes the work accomplished from June 1977 to August 1978. The efforts by the Core and State Teams in data acquisition, electric and non-electric economic studies, development of computer support functions and operations, and preparation of geothermal development scenarios are described.

  12. Regional operations research program for development of geothermal energy in the southwest United States. Final technical report, June 1977-August 1978

    Energy Technology Data Exchange (ETDEWEB)

    Marlin, J.M.; Christ, R.; McDevitt, P.; Nowotny, K.; O' Dea, P.; Rao, C.R.; Swanberg, C.

    1979-01-01

    The efforts by the Core and State Teams in data acquisition, electric and non-electric economic studies, development of computer support functions and operations, and preparation of geothermal development scenarios are described. Team reports for the states of Arizona, Colorado, Nevada, New Mexico, and Utah are included in the appendices along with a summary of the state scenarios. (MHR)

  13. International development workshops. Final technical report

    International Nuclear Information System (INIS)

    1997-01-01

    The US Department of Energy (DOE) and the Nuclear Energy Agency of the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) began to act on their recognition of the importance of education in nuclear literacy, specifically in radioactive waste management (RWM), several years ago. To address this Goal for nuclear literacy, the US DOE; through the Information and Education Division of the Office of Civilian Radioactive Waste Management (OCRWM) and in cooperation with the OECD/NEA, organized an ''International Workshop on Education in the Field of Radioactive Waste Management'' in Engelberg, Switzerland in June of 1991. To this end, a grant to support nuclear literacy and RWM was written and funded by the OCRWM and the education division of the DOE Yucca Mountain Office in 1990. The over-riding Goal of that workshop and the DOE grant was to find ways of raising the level of nuclear literacy in the general public through educational programs in radioactive waste management (RWM). The two Main Objectives of the workshop were: first, to contribute to an information base for education systems, on global aspects of radioactive waste management; and second, to achieve international consensus on the basic tools and methods required to develop the information base. These two objectives also became the principal objectives of the DOE International Workshops grant. In other words, the global and local (Nevada) objectives were one and the same. Workshop overviews and accomplishments are summarized in this report

  14. International development workshops. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-06

    The US Department of Energy (DOE) and the Nuclear Energy Agency of the Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) began to act on their recognition of the importance of education in nuclear literacy, specifically in radioactive waste management (RWM), several years ago. To address this Goal for nuclear literacy, the US DOE; through the Information and Education Division of the Office of Civilian Radioactive Waste Management (OCRWM) and in cooperation with the OECD/NEA, organized an ``International Workshop on Education in the Field of Radioactive Waste Management`` in Engelberg, Switzerland in June of 1991. To this end, a grant to support nuclear literacy and RWM was written and funded by the OCRWM and the education division of the DOE Yucca Mountain Office in 1990. The over-riding Goal of that workshop and the DOE grant was to find ways of raising the level of nuclear literacy in the general public through educational programs in radioactive waste management (RWM). The two Main Objectives of the workshop were: first, to contribute to an information base for education systems, on global aspects of radioactive waste management; and second, to achieve international consensus on the basic tools and methods required to develop the information base. These two objectives also became the principal objectives of the DOE International Workshops grant. In other words, the global and local (Nevada) objectives were one and the same. Workshop overviews and accomplishments are summarized in this report.

  15. MOX fuel fabrication: Technical and industrial developments

    International Nuclear Information System (INIS)

    Lebastard, G.; Bairiot, H.

    1990-01-01

    The plutonium available in the near future is generally estimated rather precisely on the basis of the reprocessing contracts and the performance of the reprocessing plants. A few years ago, decision makers were convinced that a significant share of this fissile material would be used as the feed material for fast breeder reactors (FBRs) or other advanced reactors. The facts today are that large reprocessing plants are coming into commercial operations: UP3 and soon UP2-800 and THORP, but that FBR deployment is delayed worldwide. As a consequence, large quantities of plutonium will be recycled in light water reactors as mixed oxide (MOX) fuels. MOX fuel technology has been properly demonstrated in the past 25 years. All specific problems have been addressed, efficient fabrication processes and engineering background have been implemented to a level of maturity which makes MOX fuel behaving as well as Uranium fuel. The paper concentrates on todays MOX fabrication expertise and presents the technical and industrial developments prepared by the MOX fuel fabrication industry for this last decade of the century

  16. Development of technical marginal conditions for the application of hydrogen as storage for renewable energies. Short version of the final report

    International Nuclear Information System (INIS)

    1993-04-01

    Due to the present experiences gained in pilot projects and by the application of hydrogen in the industry it can be expected that an equivalent safety standard will be achieved for a manifold application of hydrogen as energy carrier as e.g. in the case of natural gas or liquid gas. A decentral generation and storage of hydrogen in detached houses is not recommended in conurbation because of necessary structural measurements and safety requirements. Small supply networks on the level of municipalities shall be erected instead. The use of hydrogen in the traffic seems to be useful in utility vehicles (e.g. buses) because the vehicle construction is more suitable for a safe integration of the tank system than in case of a car. The regulation shall be extended for a broader use of hydrogen and contain minimum requirements for the equipment and design of each application in terms of safety technology. (orig./MM) [de

  17. Urology technical and non-technical skills development: the emerging role of simulation.

    Science.gov (United States)

    Rashid, Prem; Gianduzzo, Troy R J

    2016-04-01

    To review the emerging role of technical and non-technical simulation in urological education and training. A review was conducted to examine the current role of simulation in urology training. A PUBMED search of the terms 'urology training', 'urology simulation' and 'urology education' revealed 11,504 titles. Three hundred and fifty-seven abstracts were identified as English language, peer reviewed papers pertaining to the role of simulation in urology and related topics. Key papers were used to explore themes. Some cross-referenced papers were also included. There is an ongoing need to ensure that training time is efficiently utilised while ensuring that optimal technical and non-technical skills are achieved. Changing working conditions and the need to minimise patient harm by inadvertent errors must be taken into account. Simulation models for specific technical aspects have been the mainstay of graduated step-wise low and high fidelity training. Whole scenario environments as well as non-technical aspects can be slowly incorporated into the curriculum. Doing so should also help define what have been challenging competencies to teach and evaluate. Dedicated time, resources and trainer up-skilling are important. Concurrent studies are needed to help evaluate the effectiveness of introducing step-wise simulation for technical and non-technical competencies. Simulation based learning remains the best avenue of progressing surgical education. Technical and non-technical simulation could be used in the selection process. There are good economic, logistic and safety reasons to pursue the process of ongoing development of simulation co-curricula. While the role of simulation is assured, its progress will depend on a structured program that takes advantage of what can be delivered via this medium. Overall, simulation can be developed further for urological training programs to encompass technical and non-technical skill development at all stages, including

  18. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  19. Technical Education--The Key to Sustainable Technological Development

    Science.gov (United States)

    Odo, J. U.; Okafor, W. C.; Odo, A. L.; Ejikeugwu, L. N.; Ugwuoke, C. N.

    2017-01-01

    Technical education has been identified as one of the most effective human resource development that needs to be embraced for rapid industrialization and sustainable technological development of any nation. Technical education has been an integral part of national development in many societies because of its impact on productivity and economic…

  20. Studies in theoretical high energy particle physics: Technical progress report [February 1987-February 1988

    International Nuclear Information System (INIS)

    Sukhatme, U.P.; Keung, Wai-Yee; Kovacs, E.

    1988-02-01

    This is a technical progress report for grant No. FG02-84ER40173 for the period February 1987 to February 1988. Our research on supersymmetric quantum mechanics has yielded many interesting results. In particular, a systematic approach to the tunneling problem in double well potentials has been developed. Higgs boson related physics at the high energy hadron colliders has been extensively studied

  1. Nuclear energy and development

    International Nuclear Information System (INIS)

    1991-01-01

    Today, about 80 developing countries are using nuclear techniques in various sectors of their national economies. In the sector of industry, the radiation processing using gamma rays of high energy electrons has grown. While in the sector of health care, an estimated 10000 gamma cameras-imaging instruments are used in combination with radioisotopes in medical diagnosis. In the field of agriculture there is, nearly, 1000 crop varieties derived from radiaton-induced mutations which are grown worldwide. Furthermore and concerning the energy sector there is 417 nuclear power plants operating in 26 countries, accounting for just 16% of the world's total electricity production; the nuclear energy helped in developing and supporting a variety of sciences. 2 tabs

  2. Technical Support Document: 50% Energy Savings for Small Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Huang, Yunzhi; Lane, Michael D.; Liu, Bing

    2010-04-30

    The Technical Support Document (TSD) for 50% energy savings in small office buildings documents the analysis and results for a recommended package of energy efficiency measures (EEMs) referred to as the advanced EEMs. These are changes to a building design that will reduce energy usage. The package of advanced EEMs achieves a minimum of 50% energy savings and a construction area weighted average energy savings of 56.6% over the ANSI/ASHRAE/IESNA Standard 90.1-2004 for 16 cities which represent the full range of climate zones in the United States. The 50% goal is for site energy usage reduction. The weighted average is based on data on the building area of construction in the various climate locations. Cost-effectiveness of the EEMs is determined showing an average simple payback of 6.7 years for all 16 climate locations. An alternative set of results is provided which includes a variable air volume HVAC system that achieves at least 50% energy savings in 7 of the 16 climate zones with a construction area weighted average savings of 48.5%. Other packages of EEMs may also achieve 50% energy savings; this report does not consider all alternatives but rather presents at least one way to reach the goal. Design teams using this TSD should follow an integrated design approach and utilize additional analysis to evaluate the specific conditions of a project.

  3. Energy and Development

    Directory of Open Access Journals (Sweden)

    Gilles Carbonnier

    2012-03-01

    Full Text Available Published by Palgrave MacmillanThis chapter introduces the thematic dossier of International Development Policy on the intimate relationship between energy and development. The authors discuss the centrality of fossil fuels in the economic growth of the Western world since the nineteenth century and the key role of oil in the twentieth century and question the future of this development model in the face of geological and climatic constraints. They examine the gaps and misunderstandings that separate social sciences and natural sciences as well as recent attempts to establish interdisciplinary dialogue around ecological economics and industrial ecology. The authors then analyse what is at stake for developing countries, inequalities in access to energy resources, the failure of the global governance system to deal with mounting tensions associated with the depletion of oil and the environmental consequences of an ever increasing consumption of non-renewable resources.

  4. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation...

  5. Technical Support Document: Strategies for 50% Energy Savings in Large Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Leach, M.; Lobato, C.; Hirsch, A.; Pless, S.; Torcellini, P.

    2010-09-01

    This Technical Support Document (TSD) documents technical analysis that informs design guidance for designing and constructing large office buildings that achieve 50% net site energy savings over baseline buildings defined by minimal compliance with respect to ANSI/ASHRAE/IESNA Standard 90.1-2004. This report also represents a step toward developing a methodology for using energy modeling in the design process to achieve aggressive energy savings targets. This report documents the modeling and analysis methods used to identify design recommendations for six climate zones that capture the range of U.S. climate variability; demonstrates how energy savings change between ASHRAE Standard 90.1-2007 and Standard 90.1-2004 to determine baseline energy use; uses a four-story 'low-rise' prototype to analyze the effect of building aspect ratio on energy use intensity; explores comparisons between baseline and low-energy building energy use for alternate energy metrics (net source energy, energy emissions, and energy cost); and examines the extent to which glass curtain construction limits achieve energy savings by using a 12-story 'high-rise' prototype.

  6. Technical Training: ELEC-2005: Electronics in High Energy Physics

    CERN Multimedia

    Monique Duval

    2005-01-01

    CERN Technical Training 2005: Learning for the LHC! ELEC-2005: Electronics in High Energy Physics - Spring Term ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms: the Winter Term, Introduction to electronics in HEP, already took place; the next three Terms will run throughout the year: Spring Term: Integrated circuits and VLSI technology for physics (March, 6 lectures) - now open for registration Summer Term: System electronics for physics: Issues (May, 7 lectures) Autumn Term: Ele...

  7. Modelling transport energy demand: A socio-technical approach

    International Nuclear Information System (INIS)

    Anable, Jillian; Brand, Christian; Tran, Martino; Eyre, Nick

    2012-01-01

    Despite an emerging consensus that societal energy consumption and related emissions are not only influenced by technical efficiency but also by lifestyles and socio-cultural factors, few attempts have been made to operationalise these insights in models of energy demand. This paper addresses that gap by presenting a scenario exercise using an integrated suite of sectoral and whole systems models to explore potential energy pathways in the UK transport sector. Techno-economic driven scenarios are contrasted with one in which social change is strongly influenced by concerns about energy use, the environment and well-being. The ‘what if’ Lifestyle scenario reveals a future in which distance travelled by car is reduced by 74% by 2050 and final energy demand from transport is halved compared to the reference case. Despite the more rapid uptake of electric vehicles and the larger share of electricity in final energy demand, it shows a future where electricity decarbonisation could be delayed. The paper illustrates the key trade-off between the more aggressive pursuit of purely technological fixes and demand reduction in the transport sector and concludes there are strong arguments for pursuing both demand and supply side solutions in the pursuit of emissions reduction and energy security.

  8. Capacity Building Imperatives for Developing Science, Technical ...

    African Journals Online (AJOL)

    ... of white-collar jobs, and lack of productive skills for self-employment among graduates. The educational system at that time could not solve the mounting national problem. This was the major purpose why the National Policy on Education was launched in 1977 with great emphasis on Vocational and Technical education ...

  9. Development of technical specifications for research reactors

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    This standard identifies and establishes the content of technical specifications for research reactors. Areas addressed are: definitions, safety limits, limiting safety system settings, limiting conditions for operation, surveillance requirements, design features and administrative controls. Sufficient detail is incorporated so that applicable specifications can be derived or extracted

  10. Renewable energy development in China

    Energy Technology Data Exchange (ETDEWEB)

    Junfeng, Li

    1996-12-31

    This paper presents the resources availability, technologies development and their costs of renewable energies in China and introduces the programs of renewable energies technologies development and their adaptation for rural economic development in China. As the conclusion of this paper, renewable energies technologies are suitable for some rural areas, especially in the remote areas for both household energy and business activities energy demand. The paper looks at issues involving hydropower, wind energy, biomass combustion, geothermal energy, and solar energy.

  11. Development of nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Wakeham, John [Secretary of State for Energy, London (UK)

    1991-06-01

    The Government's views on the development of nuclear energy are outlined. In this country, we continue to see some important advantages in maintaining nuclear power generation. It increases diversity, and so helps to maintain security of energy supply. It does not produce greenhouse gases or contribute to acid rain. But it is equally clear that nuclear costs must be brought under control whilst at the same time maintaining the high standards of safety and environmental protection which we have come to expect in the UK. The three main elements which the nuclear industry must address in the future are summarized. First the costs of nuclear generation must be reduced. Secondly, once the feasibility and costings of PWRs have been established consideration must be given to the choices for the future energy policy and thirdly new reactor designs should be standardized so the benefits of replication can be realised. (author).

  12. Energy Materials Coordinating Committee, fiscal year 1997. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. This report summarizes EMaCC activities for FY 1997 and describes the materials research programs of various offices and divisions within the Department.

  13. Sustainability analysis. Development of various indicators of sustainability for technical environmental analysis and evaluation of local heat supply networks on the basis of regenerative energies in comparison to fossil energy sources

    International Nuclear Information System (INIS)

    Hehenberger-Risse, Diana

    2013-06-01

    The aim of this thesis is to define indicators to evaluate local heat supply systems based on renewable energy compared to fossil energy reference scenarios. With these indicators a assessment matrix was developed as a planning instrument for the realization of sustainable and energy-efficient local heat supply systems. Further inferences from single projects on regions can be done. In these thesis a method was developed to assess the sustainability of local heat supply systems with the focus on ecology under consideration of economically and social aspects. This method uses a set of indicators composed of Input-, Output-, Efficiency- and Balance indicators. To realize advancement in comparison to present situations, an environmental quality target to advance the environmental impacts of minimum 75% was defined. For the developing and application of the indicators different examples from projects and scenarios of combined heat production from Biomass, Biogas, Solar heat combined with near-surface geothermal storage; geothermal energy and fossil peakload supply were calculated. These scenarios were related to a basis fossil energy scenario. Overall, the two district heating projects Speichersdorf and Mitterteich were compared. In this case, the project Speichersdorf with different coverage areas and decrease heat densities was investigated. The lengths of electrical grid of two areas are 10,828 m and 6,027 m. Those were opposed to the biomass district-heating project Mitterteich with a grid length of 360 m and a higher heat density decrease. Furthermore, a scenario for heat supply was designed and calculated using geothermal plant operating in duplicate to provide heat to the large coverage area for the storage project village. The calculation of the various processes and scenarios was performed with the program GEMIS 4.8 based on the total heat generated (final energy) by the respective supply type. The study examined the main system components; boilers, solar heat

  14. BizWatts: A modular socio-technical energy management system for empowering commercial building occupants to conserve energy

    International Nuclear Information System (INIS)

    Gulbinas, R.; Jain, R.K.; Taylor, J.E.

    2014-01-01

    Highlights: • We developed a socio-technical commercial building energy management system. • It was designed for directly engaging and connecting building occupants via feedback. • We collected an array of clickstream data for internal design validation. • A pilot study validated its ability to drive energy savings in commercial buildings. - Abstract: Commercial buildings represent a significant portion of energy consumption and environmental emissions worldwide. To help mitigate the environmental impact of building operations, building energy management systems and behavior-based campaigns designed to reduce energy consumption are becoming increasingly popular. In this paper, we describe the development of a modular socio-technical energy management system, BizWatts, which combines the two approaches by providing real-time, appliance-level power management and socially contextualized energy consumption feedback. We describe in detail the physical and virtual architecture of the system, which simultaneously engages building occupants and facility managers, as well as the main principles behind the interface design and component functionalities. A discussion about how the data collection capabilities of the system enable insightful commercial building energy efficiency studies and quantitative network analysis is also included. We conclude by commenting on the validation of the system, identifying current system limitations and introducing new research avenues that the development and deployment of BizWatts enables

  15. Political Connections, Government Subsidies and Technical Innovation of Wind Energy Companies in China

    Directory of Open Access Journals (Sweden)

    Jiaan Qu

    2017-10-01

    Full Text Available Developing wind energy is one of the win win measures in response to climate changes and energy security. In order to promote technical innovation in the wind-energy industry, the government grants various fiscal subsidies to wind-energy companies every year. To acquire these subsidies, enterprises often employ those with political backgrounds as members of the board of directors and board of supervisors. On the one hand, the acquisition of subsidies may indeed promote the technical innovation capacity of enterprises, but, on the other hand, due to the existence of “the grabbing hand”, the technical innovation capacity of enterprises may be weakened. We selected 35 Chinese wind-energy listed companies to analyze the relationship between political connections, subsidies and the technical innovation capacity. Results indicate that, political connections to an enterprise weaken its innovative potential and achievement. Moreover, the higher the strength of political connections is, the stronger the negative impact it will bring to the innovative capacity of the enterprise. Modulation of government subsidies, however, can alleviate the negative effects of political connections.

  16. Rural energy and development

    Energy Technology Data Exchange (ETDEWEB)

    Stern, R.

    1997-12-01

    The author discusses the worldwide problem and need for rural electrification to support development. He points out that rural areas will pay high rates to receive such services, but cannot afford the capital cost for conventional services. The author looks at this problem from the point of energy choices, subsides, initial costs, financing, investors, local involvement, and governmental actions. In particular he is concerned with ways to make better use of biofuels, to promote sustainable harvesting, and to encourage development of more modern fuels.

  17. Renewable energy research and development in Canada

    Energy Technology Data Exchange (ETDEWEB)

    Chappell, M S

    1979-12-01

    Canadian research and development (R and D) in renewable energy began as a result of the oil crisis in 1974, and in keeping with government policy, is predominantly carried out in the private sector under contract to the federal government. The variety in technical maturity of the renewable energy technologies is reflected in the non-uniform funding levels among the five constituent programs. The greatest support is allotted to solar energy in recognition of its enormous potential, both in low to mid-temperature thermal and in photovoltaic applications. This report describes the technical content of these five renewable energy and R and D programs, and outlines the organization and management structures used to direct the effort. Biomass energy R and D concentrates on the harvesting, processing and conversion of wood wastes into convenient fuel forms. Near-term applications will continue to be in the forest products industries. Wind energy R and D in geothermal energy are focussed on identification and quantification of the resource. A five-megawatt experimental geothermal heating system is being established at the University of Regina. The hydraulic energy R and D program does not consider conventional hydro-electric systems which are well developed; rather, it primarily covers laboratory-scale tests on conversion devices for wave, tidal, and river flow energy systems. A substantial effort is also underway in analytic and modelling techniques for hydraulic energy systems of all types. 3 figs., 2 tabs.

  18. Technical Potential Assessment for the Renewable Energy Zone (REZ) Process: A GIS-Based Approach

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Roberts, Billy J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-04-05

    Geographic Information Systems (GIS)-based energy resource and technical potential assessments identify areas capable of supporting high levels of renewable energy (RE) development as part of a Renewable Energy Zone (REZ) Transmission Planning process. This document expands on the REZ Process to aid practitioners in conducting GIS-based RE resource and technical potential assessments. The REZ process is an approach to plan, approve, and build transmission infrastructure that connects REZs - geographic areas that have high-quality RE resources, suitable topography and land-use designations, and demonstrated developer interest - to the power system. The REZ process helps to increase the share of solar photovoltaic (PV), wind, and other resources while also maintaining reliability and economics.

  19. Energy efficiency, renewable energy and sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Ervin, C.A.

    1994-12-31

    The Office of Energy Efficiency and Renewable Energy (EE) is part of the U.S. Department of Energy that is specifically charged with encouraging the more efficient use of energy resources, and the use of renewable energy resources - such as solar power, wind power, biomass energy and geothermal energy. In the past several years, EE has increased its emphasis on technology deployment through partnerships with states, local governments and private companies. Partnerships move new discoveries more quickly into the marketplace, where they can create jobs, prevent pollution, save resources, and produce many other benefits. The author then emphasizes the importance of this effort in a number of different sections of the paper: energy consumption pervades everything we do; U.S. energy imports are rising to record levels; transportation energy demand is increasing; U.S. energy use is increasing; population growth increases world energy demand; total costs of energy consumption aren`t always counted; world energy markets offer incredible potential; cost of renewables is decreasing; clean energy is essential to sustainable development; sustainable energy policy; sustainable energy initiatives: utilities, buildings, and transportation.

  20. Energy efficiency, renewable energy and sustainable development

    International Nuclear Information System (INIS)

    Ervin, C.A.

    1994-01-01

    The Office of Energy Efficiency and Renewable Energy (EE) is part of the U.S. Department of Energy that is specifically charged with encouraging the more efficient use of energy resources, and the use of renewable energy resources - such as solar power, wind power, biomass energy and geothermal energy. In the past several years, EE has increased its emphasis on technology deployment through partnerships with states, local governments and private companies. Partnerships move new discoveries more quickly into the marketplace, where they can create jobs, prevent pollution, save resources, and produce many other benefits. The author then emphasizes the importance of this effort in a number of different sections of the paper: energy consumption pervades everything we do; U.S. energy imports are rising to record levels; transportation energy demand is increasing; U.S. energy use is increasing; population growth increases world energy demand; total costs of energy consumption aren't always counted; world energy markets offer incredible potential; cost of renewables is decreasing; clean energy is essential to sustainable development; sustainable energy policy; sustainable energy initiatives: utilities, buildings, and transportation

  1. The Office of Technology Development technical reports. A bibliography

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The US Department of Energy`s Office of Technology Development (OTD) within the Office of Environmental Management was established in 1989 to conduct an aggressive national program of applied research, development, demonstration, testing, and evaluation (RDDT&E) for innovative environmental cleanup solutions that are safer and more time- and cost-effective than those currently available. In many cases, the development of new technology presents the best hope for ensuring a substantive reduction in risk to the environment and improved worker/public safety within realistic financial constraints. Five major remediation and waste management problem areas have been identified to date within the DOE weapons complex; Contaminant Plume Containment and Remediation; Mixed Waste Characterization, Treatment, and Disposal; High-Level Waste Tank Remediation; Landfill Stabilization; and Facility Transitioning, Decommissioning, and Final Disposition. New technologies to address these problem areas are demonstrated to the point that they are proven to work and that they can be transferred to the private sector end-users. This bibliography contains information on scientific and technical reports sponsored by the Office of Environmental Management from its inception in 1989 through June 1994. Future issues contain reports from Technology Development activities and will be published biannually.

  2. Technical and Economic Potential of Distributed Energy Storages for the Integration of Renewable Energy

    DEFF Research Database (Denmark)

    Sveinbjörnsson, Dadi Þorsteinn; Trier, Daniel; Hansen, Kenneth

    Very high penetration of fluctuating renewable energy sources can lead to new challenges in balancing energy supply and demand in future energy systems. This work, carried out as a part of Annex 28 of the IEA ECES programme, addresses this. The aim of the study is to identify which role decentral...... indicate that sector coupling along with an intelligent choice of distributed energy storage technologies can enable the integration of large shares of fluctuating renewable energy in an energy efficient and cost-effective way.......Very high penetration of fluctuating renewable energy sources can lead to new challenges in balancing energy supply and demand in future energy systems. This work, carried out as a part of Annex 28 of the IEA ECES programme, addresses this. The aim of the study is to identify which role...... decentralised energy storages (DES) should play in integrating fluctuating renewable energy sources. The technical and economic potential for DES solutions is quantified using energy system modelling, and it is identified which DES technologies have the largest total (technical and economic) potential. For this...

  3. Bolivia renewable energy development

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.

    1997-12-01

    The author summarizes changes which have occurred in Bolivia in the past year which have had an impact on renewable energy source development. Political changes have included the privatization of power generation and power distribution, and resulted in a new role for state level government and participation by the individual. A National Rural Electrification Plan was adopted in 1996, which stresses the use of GIS analysis and emphasizes factors such as off grid, economic index, population density, maintenance risk, and local organizational structure. The USAID program has chosen to stress economic development, environmental programs, and health over village power programs. The national renewables program has adopted a new development direction, with state projects, geothermal projects, and private sector involvement stressed.

  4. Factors that Influence Women's Technical Skill Development in Outdoor Adventure

    Science.gov (United States)

    Warren, Karen; Loeffler, TA

    2006-01-01

    This article provides a theoretical foundation for understanding women's technical skill development (TSD) in outdoor adventure. An examination of societal and biological factors influencing women's TSD focuses on gender role socialization, sense of competence, technical conditioning, sexism, spatial ability, and risk-taking. The article suggests…

  5. The development of an e-learning software, ''Technical ethics''

    International Nuclear Information System (INIS)

    Matsue, Kazuki; Madarame, Haruki; Okamoto, Koji

    2004-01-01

    For the engineers and researchers, it is coming to the time when they are asked not only technical progress but also their ethics view. In this study, I aim to develop of the education software ''Technical Ethics'', which cultivates ethics view of the engineers. (author)

  6. Materials studies for magnetic fusion energy applications at low temperatures. VIII. Technical reports

    International Nuclear Information System (INIS)

    Reed, R.P.

    1985-05-01

    This report contains results of a research progam to produce material property data that will facilitte design and development of cryogenic structures for the superconducting magnets of magnetic fusion energy power plants and prototypes. Research results for 1984 are summarized in an initial ''Highlights of Results'' section and reported in detail in the technical papers that form the main body of this report. The technical papers are presented under four headings reflecting the main program areas: Welding, Nonmetallics, Structural Alloys, and Technology Transfer. Objectives, approaches, and achievements are summarized in an introduction to each program area

  7. Energy, Sustainability and Development

    CERN Multimedia

    CERN. Geneva

    2008-01-01

    A huge increase in energy use is expected in the coming decades – see the IEA’s ‘business as usual’/reference scenario below. While developed countries could use less energy, a large increase is needed to lift billions out of poverty, including over 25% of the world’s population who still lack electricity. Meeting demand in an environmentally responsible manner will be a huge challenge. The World Bank estimates that coal pollution leads to 300,000 deaths in China each year, while smoke from cooking and heating with biomass kills 1.3 million world-wide – more than malaria. The IEA’s alternative scenario requires a smaller increase in energy use than the reference scenario and is also less carbon intensive, but it still implies that CO2 emissions will increase 30% by 2030 (compared to 55% in the reference scenario). Frighteningly, implementing the alternative scenario faces “formidable hurdles” according to the IEA, despite the fact that it would yield financial savings for consumers that...

  8. Offshore Wind Energy Systems Engineering Curriculum Development

    Energy Technology Data Exchange (ETDEWEB)

    McGowan, Jon G. [Univ. of Massachusetts, Amherst, MA (United States); Manwell, James F. [Univ. of Massachusetts, Amherst, MA (United States); Lackner, Matthew A. [Univ. of Massachusetts, Amherst, MA (United States)

    2012-12-31

    Utility-scale electricity produced from offshore wind farms has the potential to contribute significantly to the energy production of the United States. In order for the U.S. to rapidly develop these abundant resources, knowledgeable scientists and engineers with sound understanding of offshore wind energy systems are critical. This report summarizes the development of an upper-level engineering course in "Offshore Wind Energy Systems Engineering." This course is designed to provide students with a comprehensive knowledge of both the technical challenges of offshore wind energy and the practical regulatory, permitting, and planning aspects of developing offshore wind farms in the U.S. This course was offered on a pilot basis in 2011 at the University of Massachusetts and the National Renewable Energy Laboratory (NREL), TU Delft, and GL Garrad Hassan have reviewed its content. As summarized in this report, the course consists of 17 separate topic areas emphasizing appropriate engineering fundamentals as well as development, planning, and regulatory issues. In addition to the course summary, the report gives the details of a public Internet site where references and related course material can be obtained. This course will fill a pressing need for the education and training of the U.S. workforce in this critically important area. Fundamentally, this course will be unique due to two attributes: an emphasis on the engineering and technical aspects of offshore wind energy systems, and a focus on offshore wind energy issues specific to the United States.

  9. A technical framework to describe occupant behavior for building energy simulations

    Energy Technology Data Exchange (ETDEWEB)

    Turner, William; Hong, Tianzhen

    2013-12-20

    Green buildings that fail to meet expected design performance criteria indicate that technology alone does not guarantee high performance. Human influences are quite often simplified and ignored in the design, construction, and operation of buildings. Energy-conscious human behavior has been demonstrated to be a significant positive factor for improving the indoor environment while reducing the energy use of buildings. In our study we developed a new technical framework to describe energy-related human behavior in buildings. The energy-related behavior includes accounting for individuals and groups of occupants and their interactions with building energy services systems, appliances and facilities. The technical framework consists of four key components: i. the drivers behind energy-related occupant behavior, which are biological, societal, environmental, physical, and economical in nature ii. the needs of the occupants are based on satisfying criteria that are either physical (e.g. thermal, visual and acoustic comfort) or non-physical (e.g. entertainment, privacy, and social reward) iii. the actions that building occupants perform when their needs are not fulfilled iv. the systems with which an occupant can interact to satisfy their needs The technical framework aims to provide a standardized description of a complete set of human energy-related behaviors in the form of an XML schema. For each type of behavior (e.g., occupants opening/closing windows, switching on/off lights etc.) we identify a set of common behaviors based on a literature review, survey data, and our own field study and analysis. Stochastic models are adopted or developed for each type of behavior to enable the evaluation of the impact of human behavior on energy use in buildings, during either the design or operation phase. We will also demonstrate the use of the technical framework in assessing the impact of occupancy behavior on energy saving technologies. The technical framework presented is

  10. Future development of nuclear energy systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Nuclear energy development in Japan has passed about 30 years, and reaches to a step to supply about 35 % of total electric power demand. However, together with globalization of economic and technical development, its future progressing method is required for its new efforts. Among such conditions, when considering a state of future type nuclear energy application, its contribution to further environmental conservation and international cooperation is essential, and it is required for adoption to such requirement how it is made an energy source with excellent economics.The Research Committee on 'Engineering Design on Nuclear Energy Systems' established under recognition in 1998 has been carried out some discussions on present and future status of nuclear energy development. And so forth under participation of outer specialists. Here were summarized on two year's committee actions containing them and viewpoints of nuclear industries, popularization of nuclear system technology, and so forth. (G.K.)

  11. Tribal Energy Efficiency and Renewable Energy Development on Tribal Lands (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2010-09-01

    This 12-page brochure provides an overview of the U.S. Department of Energy's (DOE's) Tribal Energy Program and describes the financial, technical, and educational assistance it provides to help tribes develop their renewable energy resources and reduce their energy consumption.

  12. Solar energy for buildings: clean energies utilisation and development

    International Nuclear Information System (INIS)

    Omer, Abdeen M.

    2015-01-01

    The move towards a de-carbonized world, driven partly by climate science and partly by the business opportunities it offers, will need the promotion of environmentally friendly alternatives, if an acceptable stabilization level of atmospheric carbon dioxide is to be achieved. This requires the harnessing and use of natural resources that produce no air pollution or greenhouse gases and provides comfortable coexistence of human, livestock, and plants. This article presents a comprehensive review of energy sources, and the development of sustainable technologies to explore these energy sources. It also includes potential renewable energy technologies, efficient energy systems, energy savings techniques and other mitigation measures necessary to reduce climate changes. The article concludes with the technical status of the ground source heat pumps (GSHP) technologies. (full text)

  13. Research and Development Issues for Interactive Electronic Technical Manuals

    National Research Council Canada - National Science Library

    Ricci, Katrina

    2002-01-01

    .... While there is a wide range of research issues associated with technical manuals, the focus of the Intelligent Performance Support and Training effort is the development and evaluation of various...

  14. ["Hannibal ante portas" -- technical development and health care reorganization].

    Science.gov (United States)

    Fülesdi, Béla; Velkey, György

    2011-11-20

    Authors intend to analyze the impact of medical technical development on the Hungarian health care system and try to draw attention to potentially necessary measures for professional and structural health care reorganization.

  15. Technical and economical aspects of wind energy applications in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Durstewitz, M; Hoppe-Kilpper, M; Kleinkauf, W [Inst. fuer Solare Energieversorgungstechnik e.V., Kassel (Germany)

    1996-12-31

    The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO{sub 2}, SO{sub 2}, NO{sub x} etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme `250 MW Wind`. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

  16. Technical and economical aspects of wind energy applications in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Durstewitz, M.; Hoppe-Kilpper, M.; Kleinkauf, W. [Inst. fuer Solare Energieversorgungstechnik e.V., Kassel (Germany)

    1995-12-31

    The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO{sub 2}, SO{sub 2}, NO{sub x} etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme `250 MW Wind`. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

  17. Technical and economical aspects of wind energy applications in Germany

    International Nuclear Information System (INIS)

    Durstewitz, M.; Hoppe-Kilpper, M.; Kleinkauf, W.

    1995-01-01

    The use of renewable energy for the continuously growing global population is becoming increasingly important. These forms of energy not only broaden the urgently needed resource base, but are also free from emission of CO 2 , SO 2 , NO x etc. The Federal German Government early recognized this and has provided more than DEM 4000 million for this purpose since 1973. Together with Japan and the USA, Germany belongs to the three leading nations in the world in R and D on the application of renewable energy. It has by far the largest and most broadly based programme in Europe. The technical and economical progress of wind power is very promising in Germany. It has scale demonstration programme '250 MW Wind'. Since 1991 another important impetus has been the sources (wind power presently 0.1728 DEM/kWh). In 1994, the rated wind power capacity was doubled to 643 MW. Electricity production in 1994 was around 1000 million kWh or 0.2 % of total German electricity production. The often discussed goal of producing one or more per cent of the German electricity by wind power seems to be attainable on a medium time scale by modern medium scale wind turbines or even large scale turbines. This is based on the promise that various nontechnical barriers will be overcome. (author)

  18. A sustainable energy development

    International Nuclear Information System (INIS)

    1996-01-01

    The French government has decided to encourage electric power production through renewable energies (such as wind energy with the Eole 2000 plan, solar water heaters in overseas departments, wood energy for space heating in buildings, photovoltaic energy), demand side management and cogeneration, and to enhance its purchase conditions by the government-owned EDF utility. Laws have been also introduced concerning air quality and the rational use of energy

  19. Energy consumption and technological developments

    International Nuclear Information System (INIS)

    Okorokov, V.R.

    1990-02-01

    The paper determines an outline of the world energy prospects based on principal trends of the development of energy consumption analysed over the long past period. According to the author's conclusion the development of energy systems will be determined in the nearest future (30 - 40 years) by contemporary energy technologies based on the exploitation of traditional energy resources but in the far future technologies based on the exploitation of thermonuclear and solar energy will play the decisive role. (author)

  20. DOE technical standards list. Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  1. Overview of renewable energy sources development in France

    International Nuclear Information System (INIS)

    Lengyel, J.; Lepy, S.; Roudergues, J.M.

    2009-01-01

    Generation from Renewable Energy Sources is booming. As for any conventional generation technology, RES specific technical features can be accommodated by the electric system with no tremendous difficulty, provided the grid can be aptly adapted and developed. (authors)

  2. Annual meeting on nuclear technology '92. Technical session 'Nuclear energy discussion'

    International Nuclear Information System (INIS)

    1992-05-01

    The report contains the six special papers red at the 1992 annual conference on nuclear engineering at Karlsruhe, all of which are individually retrievable from the database. They deal with the following subjects: historical development of the basic trends of technology criticism; communication problems in connection with the conveying of technical facts; psycho-sociological patterns of technology anxiety-mental infection or risk consciousness; field of tension between technology and journalism; handling of insecurities; ethical justifiability of nuclear energy use. (HSCH) [de

  3. Alternative Energy Development and China's Energy Future

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Nina; Fridley, David

    2011-06-15

    In addition to promoting energy efficiency, China has actively pursued alternative energy development as a strategy to reduce its energy demand and carbon emissions. One area of particular focus has been to raise the share of alternative energy in China’s rapidly growing electricity generation with a 2020 target of 15% share of total primary energy. Over the last ten years, China has established several major renewable energy regulations along with programs and subsidies to encourage the growth of non-fossil alternative energy including solar, wind, nuclear, hydro, geothermal and biomass power as well as biofuels and coal alternatives. This study thus seeks to examine China’s alternative energy in terms of what has and will continue to drive alternative energy development in China as well as analyze in depth the growth potential and challenges facing each specific technology. This study found that despite recent policies enabling extraordinary capacity and investment growth, alternative energy technologies face constraints and barriers to growth. For relatively new technologies that have not achieved commercialization such as concentrated solar thermal, geothermal and biomass power, China faces technological limitations to expanding the scale of installed capacity. While some alternative technologies such as hydropower and coal alternatives have been slowed by uneven and often changing market and policy support, others such as wind and solar PV have encountered physical and institutional barriers to grid integration. Lastly, all alternative energy technologies face constraints in human resources and raw material resources including land and water, with some facing supply limitations in critical elements such as uranium for nuclear, neodymium for wind and rare earth metals for advanced solar PV. In light of China’s potential for and barriers to growth, the resource and energy requirement for alternative energy technologies were modeled and scenario analysis

  4. Recent technical developments at the IMAU: A new generation of AWS and wireless subglacial measurements

    NARCIS (Netherlands)

    Smeets, C.J.P.P.; Boot, W.; van den Broeke, M.R.; van de Wal, R.S.W.

    2011-01-01

    Two technical developments are presented: a new generation of AWS and a wireless subglacial measurement system. Both systems build on the experience of the IMAU in developing GPS systems (Den Ouden et al., 2010). Combining methods to minimize energy consumption and wireless communication form the

  5. Energy usage and technical potential for energy saving measures in the Swedish residential building stock

    International Nuclear Information System (INIS)

    Mata, Érika; Sasic Kalagasidis, Angela; Johnsson, Filip

    2013-01-01

    This paper provides an analysis of the current energy usage (net energy and final energy by fuels) and associated carbon dioxide (CO 2 ) emissions of the Swedish residential building stock, which includes single-family dwellings and multi-family dwellings. Twelve energy saving measures (ESMs) are assessed using a bottom–up modeling methodology, in which the Swedish residential stock is represented by a sample of 1400 buildings (based on data from the year 2005). Application of the ESMs studied gives a maximum technical reduction potential in energy demand of 53%, corresponding to a 63% reduction in CO 2 emissions. Although application of the investigated ESMs would reduce CO 2 emissions, the measures that reduce electricity consumption for lighting and appliances (LA) will increase CO 2 emissions, since the saved electricity production is less CO 2 -intensive than the fuel mix used for the increased space heating required to make up for the loss in indirect heating obtained from LA. - Highlights: ► Analysis of year 2005energy use and CO2 emissions of Swedish residential buildings. ► Includes all single-family dwellings and multi-family dwellings. ► Bottom–up modeling of building stock represented by 1400 buildings. ► Technical effects of 12 energy saving measures are assessed. ► Energy demand can be reduced by53% and associated CO 2 emissions by 63%

  6. New Mexico statewide geothermal energy program. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Icerman, L.; Parker, S.K. (ed.)

    1988-04-01

    This report summarizes the results of geothermal energy resource assessment work conducted by the New Mexico Statewide Geothermal Energy Program during the period September 7, 1984, through February 29, 1988, under the sponsorship of the US Dept. of Energy and the State of New Mexico Research and Development Institute. The research program was administered by the New Mexico Research and Development Institute and was conducted by professional staff members at New Mexico State University and Lightning Dock Geothermal, Inc. The report is divided into four chapters, which correspond to the principal tasks delineated in the above grant. This work extends the knowledge of the geothermal energy resource base in southern New Mexico with the potential for commercial applications.

  7. Technical Development Path for Gas Foil Bearings

    Science.gov (United States)

    Dellacorte, Christopher

    2016-01-01

    Foil gas bearings are in widespread commercial use in air cycle machines, turbocompressors and microturbine generators and are emerging in more challenging applications such as turbochargers, auxiliary power units and propulsion gas turbines. Though not well known, foil bearing technology is well over fifty years old. Recent technological developments indicate that their full potential has yet to be realized. This paper investigates the key technological developments that have characterized foil bearing advances. It is expected that a better understanding of foil gas bearing development path will aid in future development and progress towards more advanced applications.

  8. Energy Research & Development

    Science.gov (United States)

    Skip to Main Content CA.gov California Energy Commission CA.gov | Contact | Newsroom | Quick Links convenience of our website visitors and is for informational purposes only. The California Energy Commission Google Translate™. The California Energy Commission does not endorse the use of Google TranslateÂ

  9. Development of nuclear technology through International Technical Cooperation programme: Malaysian experience

    International Nuclear Information System (INIS)

    Ainul Hayati Daud

    1997-01-01

    In the advent of new technologies and knowledge, countries need to rely on one another for progress and development. At the same time, new challenges to development, which are beyond the competence of any country to approach individually, have emerged. These have led to greater need for international co-operation, particularly among the developing countries. In Malaysia, international technical co-operation has contributed significantly towards the development of nuclear technology. Malaysia has received technical assistance through the multilateral, regional and bilateral co-operation. This assistance complements the efforts of the government to meet the primary objectives of science and technology programme, which are; intensification of R and D capacity and applications of technologies, both acquired and developed, in national development. Over the last one and a half decade, more than 70 projects valued almost USD 15 millions, were implemented under the Technical Assistance Programme of the International Atomic Energy Agency and the Bilateral Technical Assistance Programme of Japan and Australia. Malaysia also has benefited from the regional technical co-operation programme such Regional Co-operative Agreement for Asia and Pacific Region, United Nation Department Programme, International Nuclear Co-operation in Asia. While receiving assistance, Malaysia continues to assist other developing countries in their development efforts in the fields of nuclear technology, through the various international co-operation programmes. This report reviews the technical assistance received through the international co-operation and its contributions towards the development of nuclear technology in Malaysia for period 1980 - 1996

  10. Alternative Energy Center, Final Scientific/Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dillman, Howard D.; Marshall, JaNice C.

    2007-09-07

    The Lansing Community College Alternative Energy Center was created with several purposes in mind. The first purpose was the development of educational curricula designed to meet the growing needs of advanced energy companies that would allow students to articulate to other educational institutions or enter this growing workforce. A second purpose was the professional development of faculty and teachers to prepare them to train tomorrow's workforce and scholars. Still another purpose was to design, construct, and equip an alternative energy laboratory that could be used for education, demonstration, and public outreach. Last, the Center was to engage in community outreach and education to enhance industry partnerships, inform decision makers, and increase awareness and general knowledge of hydrogen and other alternative energy technologies and their beneficial impacts on society. This project has enabled us to accomplish all of our goals, including greater faculty understanding of advanced energy concepts, who are now able to convey this knowledge to students through a comprehensive alternative energy curriculum, in a facility well-equipped with advanced technologies, which is also being used to better educate the public on the advantages to society of exploring alternative energy technologies.

  11. Model for prioritization of regional strategies within the technical cooperation of the International Atomic Energy Agency

    International Nuclear Information System (INIS)

    Silva, Pedro Maffia da

    2017-01-01

    The International Atomic Energy Agency's Technical Cooperation Program is the main mechanism through which services are provided to its member states to help them build, strengthen and maintain their capabilities in the safe use of nuclear technology in support of socio-economic development. The technical cooperation program operates in four geographical regions, each regional program helps Member States to meet their specific needs, taking into account existing capacities and different operating conditions. The technical cooperation regions are Asia and the Pacific, Europe, Africa and Latin America and the Caribbean. Developing activities together with the technical cooperation program we have the Regional Cooperation Agreement for the Promotion of Nuclear Science and Technology in Latin America and the Caribbean (ARCAL), which involves the majority of the members of the International Atomic Energy Agency of that region, for Technical Cooperation. All ARCAL's work is guided by the Regional Strategic Profile, which identifies the needs and problems of the region that require support projects. In the technical meeting of the Regional Strategic Profile, the needs and problems that are analyzed through indexes associated with severity, urgency, extension, relevance and difficulty are listed by different thematic areas. To these indexes, values are established by the technical staff on a continuous scale between 1 and 5. From these values an expression is used to arrive at a priority number for the needs and problems. In the face of many criticisms associated with similar approaches, such as Failure Modes and Effects Analysis, and Timing, Trend and Impact Matrix, the aim of this thesis is to propose a methodological approach that can assist in the prioritization of investments of technical cooperation projects and programs that take into account the budget available and the technical and strategic visions of the parties involved. For this, the Probabilistic Composition

  12. Strengthening Technical Communication for Common Development

    Institute of Scientific and Technical Information of China (English)

    Zhou Jiping

    2005-01-01

    @@ Technological advancement is a critical element to ensure stable development of the petroleum industry, while communication and cooperation is a major way to achieve the advancement. Thanks to the development over the last 50 years, China's petroleum industry has formed unique petroleum theories, advanced and practical technologies, and is capable of undertaking large upstream and downstream projects.

  13. Outsourcing technical services : Stages of development

    NARCIS (Netherlands)

    Elfring, T.; Baven, Geert

    1994-01-01

    This article is based on an investigation of the development of two service functions, software development and engineering, in the automobile industry. The inquiry revealed the importance of 'learning and leverage', and the need for a successful combination of functional and application

  14. Strategies for Sustainable Energy Development

    DEFF Research Database (Denmark)

    Meyer, Niels I

    2009-01-01

    The paper analyses international strategies for establishing a sustainable energy development. Proposals are given for mitigation of global warming.......The paper analyses international strategies for establishing a sustainable energy development. Proposals are given for mitigation of global warming....

  15. 10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Grant application submittals for technical assistance and... Grant application submittals for technical assistance and energy conservation measures. (a) Each... assistance for energy conservation measures, including renewable resource measures, shall include the...

  16. Fuel and power resources based on energy-saving technologies and technical means in agriculture

    Directory of Open Access Journals (Sweden)

    A. V. Tikhomirov

    2015-01-01

    Full Text Available The state and efficiency of the use of the energy supply systems in agriculture were analyzed. It is demonstrated that grids and power equipment deterioration exceeds 30 percent, and fuel volume-efficiency ratio is not more than 35 percent in this sector. A considerable part of the country territory (mainly the northern one does not have centralized power supply. Decentralized cogeneration systems with extensive use of renewable energy sources and local energy recourses are highly efficient for this part. A necessity of development of methodology and recommendations for the selection of efficient systems and technical means of power supply to agricultural enterprises was substantiated with due consideration of their location, load intensity and distance from centralized grids. The most important indication of energy efficiency is energy intensity of products and energy inputs share in the production cost. Reserves for energy saving including the development of energy-efficient technologies and technical means, some of which have already been developed (equipment for lighting, microclimate, primary treatment and storage of products, disinfection or are at the completion stage were presented. Their implementation in agricultural production will make it possible to raise considerably the efficiency of the use of fuel and power resources and to reduce energy consumption. The conditions in which the use of decentralized power supply systems is most efficient were educed. The characteristics of related equipment and the specifics of its use at agricultural enterprises are described. The proposal and priority actions for the development and upgrading of power supply systems for agriculture have been elaborated.

  17. Outcome indicators for the evaluation of energy policy instruments and technical change

    International Nuclear Information System (INIS)

    Neij, Lena; Astrand, Kerstin

    2006-01-01

    The aim of this paper is to propose a framework for the evaluation of policy instruments designed to affect development and dissemination of new energy technologies. The evaluation approach is based on the analysis of selected outcome indicators describing the process of technical change, i.e. the development and dissemination of new energy technologies, on the basis of a socio-technical systems approach. The outcome indicators are used to analyse the effect, in terms of outcome, and outcome scope of the policy instruments as well as the extent to which the policy instruments support diversity, learning and institutional change. The analysis of two cases of evaluations, of energy efficiency policy and wind energy policy in Sweden, shows that the approach has several advantages, allowing continuous evaluation and providing important information for the redesign of policy instruments. There are also disadvantages associated with the approach, such as complexity, possible high cost and the requirement of qualified evaluators. Nevertheless, it is concluded that the information on the continuous performance of different policy instruments and their effects on the introduction and dissemination of new energy technologies, provided by this evaluation approach, is essential for an improved adaptation and implementation of energy and climate policy

  18. Commercial Building Energy Asset Score Program Overview and Technical Protocol (Version 1.1)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na; Goel, Supriya; Makhmalbaf, Atefe

    2013-08-09

    The U.S. Department of Energy (DOE) is developing a voluntary national scoring system for commercial buildings to help building owners and managers assess a building’s energy-related systems independent of operations. The goal of the score is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system, known as the Commercial Building Energy Asset Score, will allow building owners and managers to compare their building infrastructure against peers and track building upgrades over time. The system will also help other building stakeholders (e.g., building investors, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset scoring tool. The alternative methods that were considered prior to developing the current approach are described in the Program Overview and Technical Protocol Version 1.0.

  19. Offshore wind development research (technical brief).

    Science.gov (United States)

    2014-04-01

    The study addresses all aspects of Offshore Wind (OSW) development. This includes identifying : vessel types, vessel installation methods, needs and operating characteristics through all phases : of OSW installation, construction, operations and main...

  20. A socio-technical approach to improving retail energy efficiency behaviours.

    Science.gov (United States)

    Christina, Sian; Waterson, Patrick; Dainty, Andrew; Daniels, Kevin

    2015-03-01

    In recent years, the UK retail sector has made a significant contribution to societal responses on carbon reduction. We provide a novel and timely examination of environmental sustainability from a systems perspective, exploring how energy-related technologies and strategies are incorporated into organisational life. We use a longitudinal case study approach, looking at behavioural energy efficiency from within one of the UK's leading retailers. Our data covers a two-year period, with qualitative data from a total of 131 participants gathered using phased interviews and focus groups. We introduce an adapted socio-technical framework approach in order to describe an existing organisational behavioural strategy to support retail energy efficiency. Our findings point to crucial socio-technical and goal-setting factors which both impede and/or enable energy efficient behaviours, these include: tensions linked to store level perception of energy management goals; an emphasis on the importance of technology for underpinning change processes; and, the need for feedback and incentives to support the completion of energy-related tasks. We also describe the evolution of a practical operational intervention designed to address issues raised in our findings. Our study provides fresh insights into how sustainable workplace behaviours can be achieved and sustained over time. Secondly, we discuss in detail a set of issues arising from goal conflict in the workplace; these include the development of a practical energy management strategy to facilitate secondary organisational goals through job redesign. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  1. SEE Action Guide for States: Guidance on Establishing and Maintaining Technical Reference Manuals for Energy Efficiency Measures

    Energy Technology Data Exchange (ETDEWEB)

    None

    2017-06-01

    The goal of this guide is to support the development, maintenance, and use of accurate and reliable Technical Reference Manuals (TRMs). TRMs provide information primarily used for estimating the energy and demand savings of end-use energy efficiency measures associated with utility customer-funded efficiency programs.

  2. Canadian energy supply and demand 1993 - 2010: Appendix to the technical report

    International Nuclear Information System (INIS)

    1994-12-01

    The National Energy Board has since 1959 prepared and maintained projections of energy supply requirements and has from tine to time published reports on them. The objectives of this report are to provide a comprehensive 'all energy' market analysis and outlook to service as a standard of reference for all parties interested in Canadian energy issues; to provide a framework for public discussion on emerging energy issues of national importance and to monitor the prospects for the supply, demand and price of natural gas in Canada pursuant to the Market-Based Procedure for regulating. The focus of the technical report provides detailed descriptions of the analytical methods used and the quantitative results. The quantitative analysis will be of value to users who wish to develop their own views of prospects or to have a detailed assessment of the impact of alternative assumptions. 93 tabs., 13 figs

  3. Canadian energy supply and demand 1993 - 2010: Appendix to the technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-01

    The National Energy Board has since 1959 prepared and maintained projections of energy supply requirements and has from tine to time published reports on them. The objectives of this report are to provide a comprehensive `all energy` market analysis and outlook to service as a standard of reference for all parties interested in Canadian energy issues; to provide a framework for public discussion on emerging energy issues of national importance and to monitor the prospects for the supply, demand and price of natural gas in Canada pursuant to the Market-Based Procedure for regulating. The focus of the technical report provides detailed descriptions of the analytical methods used and the quantitative results. The quantitative analysis will be of value to users who wish to develop their own views of prospects or to have a detailed assessment of the impact of alternative assumptions. 93 tabs., 13 figs.

  4. Technical and economic analysis of using biomass energy

    Directory of Open Access Journals (Sweden)

    Piaskowska-Silarska Małgorzata

    2017-01-01

    Full Text Available In the first part of the article were presented the technical possibilities of obtaining solid biomass, biogas, landfill gas, a biogas from wastewater treatment plants, bioethanol and biodiesel. Then processes was described, allowing use of energy from biomass. As first was discussed the incineration which includes drying and degassing of the wood materials, wood gas burning at 1200°C, post-combustion gas and heat transfer in the heat exchanger. Then had been described gasification, or thermochemical conversion process, occurring at high temperature. It is two-stage process. In the first chamber at deficiency of air and at relatively low temperatures (450–800°C, the fuel is being degasified, resulting in creating combustible gas and a mineral residue (charcoal. In the second stage, secondary combustion chamber and at a temperature of about 1000–1200°C and in the presence of excess of oxygen resultant gas is burned. A further process is pyrolysis. It consists of the steps of drying fuel to a moisture level below 10%, milling the biomass into very small particles, the pyrolysis reaction, separation of solid products, cooling and collecting bio-oil. Then discusses co-generation, which is combined production of heat and electricity. In this situation where the biomass contains too much water it can be used for energy purposes through biochemical processes. The alcoholic fermentation results in decomposition of carbohydrates taking place under anaerobic conditions, and the product is bioethanol. Another biochemical process used for the production of liquid biofuels is esterification of vegetable oils. Methane fermentation in turn causes a decomposition of macromolecular organic substances with limited oxygen available. As a result, we obtain alcohols, lower organic acids, methane, carbon dioxide and water. There was analysis of economic increasing of solid biomass energy, biogas and liquid biofuels in the following article.

  5. Energy Assurance Technical Training and Awareness Program/Energy Infrastructure Training and Analysis Center

    Energy Technology Data Exchange (ETDEWEB)

    Barbara McCabe

    2005-11-15

    This report covers the work completed during Year One (Year One has a 16 month project period) of a five- year Cooperative Agreement (DE-FC26-03NT41895) between the International Union of Operating Engineers (IUOE) National Hazmat Program (OENHP) and the U. S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). This final technical report is being submitted, as required by the Cooperative Agreement, within 90 (calendar) days after the project period ends (December 31, 2004). The resources allocated to Year One of the Cooperative Agreement were adequate for the completion of the required deliverables. All deliverables have been completed and sent to AAD Document Control as directed in the cooperative agreement. The allocation for Year One required 20-25 trainers to be trained in each of five Train-the-Trainer courses and a total of 6,000 workers trained throughout the country. Through cost savings employed for the scheduling and conduct of Train-the-Trainer, instructor refreshers, and direct training classes, 3171 workers have been trained to date. This total incorporates 159 trainers and members from management, local, county, state and federal organizations identified in the Strategic Plan. The largest percentage of personnel trained is heavy equipment operators, and building engineers, which is the largest targeted population identified under this cooperative agreement. The OENHP, using existing curriculum as appropriate, has modified and developed new training modules that have been used to establish four different levels of training courses. The four courses are: (1) EA 500 Energy Assurance Train-the-Trainer, (2) EA 400 Energy Assurance Instructor Refresher, (3) EA 300 Energy Assurance, and (4) EA 100 Energy Assurance Awareness. Training modules cover topics, such as, but not limited to, facility vulnerability and vulnerability assessment, physical security- heating, ventilation, air conditioning, terrorism awareness, weapons of mass

  6. Solar energy developments: photovoltaics

    International Nuclear Information System (INIS)

    Sivoththaman, S.

    2006-01-01

    The annual photovoltaic (PV) energy production crossed the 1 Gigawatt mark a couple of years ago, and continues to grow at rates exceeding 40%. The cost of PV has been continuously dropping due to increased production and also thanks to the technological advances made over the past two decades at the material, device, and system levels. Although PV is still considered expensive, cost-competitiveness is expected to be achieved in the next 5-10 years. With the current PV market 90% dominated by crystalline silicon (Si) material, advances are being made in tackling the Si shortage issue, and new approaches in feedstock refinement are getting shape. On the other hand, progress is being made on thin film-based advanced devices and on novel organic semiconductors. Novel concepts based on quantum physics and nanotechnology do have the ability to improve device performance beyond traditional theoretical limits. The domination of Si is expected to shift when these next generation technologies mature into industry-level scalability. On the system level, advanced back-end electronics provides more efficient power conditioning for modern PV modules. Systems level combinations such as solar thermal/PV hybrids and PV/hydrogen systems are also promising. An overview of recent technology developments will be presented with highlights in the Canadian scenario. (author)

  7. Technical plan for nondestructive examination technology development

    International Nuclear Information System (INIS)

    Anderson, B.C.

    1982-12-01

    This report provides a description of the development of the nondestructive examination (NDE) equipment to be used in the Stored Waste Examination Pilot Plant (SWEPP) for certifying transuranic (TRU) waste for shipment to the Waste Isolation Pilot Plant (WIPP). NDE equipment is being developed for waste identification and container integrity. Real-time x-ray radiography is the basic method being used for waste identification. Acoustic (ultrasonic) testing is being used to obtain measurements to verify container integrity. This report describes the decisions made to date, the decisions to be made, and the activities planned for FY 1983 through FY 1985

  8. Renewable energies (EnR); Technical Guidebook nr. 3

    International Nuclear Information System (INIS)

    Bejanin, Emmanuel; Berly, Frederic; Lyant, Valentin; Marchal, David; Vesine, Eric; Reif, Christophe; Thienard, Helene; Yalamas, Pierrick

    2011-06-01

    This publication aims at presenting methodological principles for the survey of renewable energies at a regional level. More precisely, it proposes simple and relevant indicators which allow renewable energy production to be assessed, and the evolution in time of the development of related sectors to be monitored. It also aims at identifying necessary data for the building up of indicators with a distinction between data provided by regional organisations and those to be searched for or re-built at a regional or infra-regional level. As far as data available at a regional level are concerned, it indicates available data sources and their characteristics, and currently used methods for the monitoring of renewable energies. Two types of renewable energy sector valorisation are addressed: electric power valorisation (photovoltaic, wind, hydroelectricity, and biomass), and thermal valorisation (solar thermal, deep geothermal, heat pump, thermal biomass)

  9. Conserving energy through new irrigation technologies. Technical briefing report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    The benefits and applications of five irrigation technologies are explored: mobile drop-tube irrigation, computerized scheduling, reduced-pressure center pivots, well design and development, and automated gated-pipe systems. Perhaps the most promising of the new irrigation technologies is the low-energy, precision-application (LEPA) system. This mobile system used one-half the energy of conventional sprinkler systems and distributes water with greater efficiency through a series of low-pressure drop tubes suspended above the crop. Computerized methods of irrigation scheduling have been developed to help farmers conserve water and energy. Special computer programs determine when a crop needs water and how much to apply for optimal plant growth, thus preventing the unnecessary costs of pumping more water than the crop needs. Field test results show that replacing traditional scheduling methods of irrigation with computerized scheduling can reduce energy and water use by as much as 35%. The irrigation industry is actively promoting reduced-pressure water application methods, particularly for center-pivot systems. Reduced-pressure systems expend less energy but produce the same crop yields as conventional high-pressure systems, as long as excessive water runoff does not occur. If well design and development techniques are applied when a well is drilled into an unconsolidated acquifer, the well's life expectancy, as well as its operating efficiency, can increase, the later by as much as 40%.

  10. Biomass energy development

    International Nuclear Information System (INIS)

    Ng'eny-Mengech, A.

    1990-01-01

    This paper deals more specifically with biomethanation process and non conventional sources of biomass energy such as water hyacinths and vegetable oil hydrocarbon fuels. It highlights socioeconomic issues in biomass energy production and use. The paper also contains greater details on chemical conversion methods and processes of commercial ethanol and methanol production. (author). 291 refs., 6 tabs

  11. Financing energy development

    International Nuclear Information System (INIS)

    Kariwara, Y.

    1990-01-01

    The 1990s is likely to be a decade of double growth: in energy demand and environmental protection. This leads the author of this paper to ask the pertinent questions of where the money will come from, and in what form, to finance the growth in capacity to produce this energy and the technology required to produce and burn it cleanly. With a focus on Asian energy markets, this paper first illustrates the problem by describing the rapid growth of energy demand in the region. It describes the growth in Japan as well as China and the fast-growing economies of Hong Kong, Indonesia, Malaysia, the Philippines, Singapore, South Korea, Taiwan, and Thailand. Energy demand growth rates of almost 5 percent in the 1980s are expected to continue to grow at that rate at least until 2005, doubling today's level of consumption and putting the energy supply system under great strain. Because of the large sums involved, this paper pints out the necessity of inventing new, innovative devices for future fund raising. This will require the participation of institutions such as insurance companies and regional banks that have little experience in the energy field. This paper suggests that these and the established players in energy finance will have recourse to two new approaches: Build-Operate-Transfer and Trustee Borrowing schemes

  12. Development of technical information processing systems

    International Nuclear Information System (INIS)

    Lee, Ji Ho; Kim, Tae Whan; Kim, Sun Ja; Kim, Young Min; Choi, Kwang; Oh, Joung Hun; Choung, Hyun Suk; Keum, Jong Yong; Yoo, An Na; Harn, Deuck Haing; Choun, Young Chun

    1993-12-01

    The major goal of this project is to develop a more efficient information management system by connecting the KAREI serials database which enable the users to access from their own laboratory facilities through KAREI-NET. The importance of this project is to make the serials information of KAERI easily accessible to users as valuable resources for R and D activities. The results of the project are as follows. 1) Development of the serials database and retrieval system enabled us to access to the serials holding information through KAERI-NET. 2) The database construction establishes a foundation for the management of 1,600 serials held in KAERI. 3) The system can be applied not only to KAERI but also to similar medium-level libraries. (Author)

  13. Physics and technical development of accelerators

    International Nuclear Information System (INIS)

    2000-03-01

    About 90 registered participants delivered more than 40 scientific papers. A great part of these presentations were of general interest about running projects such as CIME accelerator at Ganil, IPHI (high intensity proton injector), ESRF (European source of synchrotron radiation), LHC (large hadron collider), ELYSE accelerator at Orsay, AIRIX, and VIVITRON tandem accelerator. Other presentations highlighted the latest technological developments of accelerator components: superconducting cavities, power klystrons, high current injectors..

  14. IFRI's notebooks. Energy, development and security

    International Nuclear Information System (INIS)

    Finon, D.; Jacquet, P.

    1999-01-01

    Today, the concept of energy security has been greatly modified by the worldwide trade, the markets deregulation, the technical progress and the nuclear contestation. This notebook is the synthesis of a colloquium jointly organized in December 16, 1997 by the IFRI and the Institute of Economy and Energy Policy (IEPE) with the sustain of the French delegation of strategic affairs of the defense ministry. It analyzes the evolution of energy markets at the year 2030 prospects and stresses on the role of Middle-East and on the stakes of the economical development and energy policy of China. Finally, it treats of the goals and modalities of the French and European energy policies. (J.S.)

  15. Technical developments in international satellite business services

    Science.gov (United States)

    Tan, P. P.

    At the conception of International Satellite Business Services (ISBS), it was a primary objective to provide flexibility for accommodating a variety of service requirements which might be established by mutual agreement between users. The design guidelines are to ensure that the space segment is efficiently utilized, while other satellite services are protected from interference. Other considerations are related to an acceptable earth segment cost, maximum connectivity in worldwide services, the capability of growth and a reasonably smooth transition into future systems, and the maintenance of high performance objectives. Attention is given to a system overview, the characteristics of satellites for ISBS, and technological developments with some application possibilities for ISBS.

  16. Systems Engineering Technical Leadership Development Program

    Science.gov (United States)

    2012-08-30

    a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE 30 AUG...topics and elements were collected from a wide variety of sources, including NASA6, Nokia , BAE Systems, the DoD, and the Australian government to develop...WHS TOO009 RT0004 Report No. SERC-2012-TR-034-1 August 30, 2012 UNCLASSIFIED 17 solutions to pursue and why they should be built. 2. Help teams

  17. Sustainable development and energy indicators

    International Nuclear Information System (INIS)

    Pop-Jordanov, Jordan

    2002-01-01

    Starting from the basic definition of sustainable development and its four dimensions, the role of indicators for sustainable energy development is analysed. In particular, it is shown that important energy efficiency indicators belong in fact to energy supply efficiency, while the end-use energy efficiency could be more pertinently represented by energy intensity indicators. Furthermore, the negentropic effects of science and technology related sustainable energy scenarios are pointed out. Finally, the sustainable development is related to wisdom, interpreted as a sum of knowledge, morality and timing. (Author)

  18. The JMTR operation and technical development, 4

    International Nuclear Information System (INIS)

    1990-11-01

    The JMTR complex consists of a 50 MW high neutron flux reactor (JMTR; Japan Materials Testing Reactor), the irradiation facilities, a hot laboratory and nuclear critical assembly (JMTRC; Japan Materials Testing Reactor Critical Assembly). Many irradiation examination have been carried out by the capsules, hydraulic rabbit and loop facilities in the JMTR since 1971 when 50 MW high power operation started. These irradiation facilities have been fabricated, modified and replaced according to the needs of the times. And now, one high temperature gas loop (OGL-1, Oarai Gas Loop-1), two water loop (OWL-2; Oarai Water Loop-2, OSF-1; Oarai Shroud Facility), two hydraulic rabbit facilities and many capsules are in the JMTR. And post irradiation examination equipments have been developed according to the needs. This report describes the activities of JMTR Project performed in fiscal year 1989 as following; 1) The operation and management of the JMTR, Hot Laboratory and the JMTRC, 2) utilization status of the JMTR, 3) conversion to Low Enrichment Uranium Fuel, 4) fabrication, modification and replacement of the irradiation facilities and reactor core components, 5) development of the irradiation techniques and post irradiation examination techniques, 6) the fundamental studies to conduct irradiation techniques, 7) future program of the JMTR. (author)

  19. Developing technical exchanges with C-6 utilities

    Energy Technology Data Exchange (ETDEWEB)

    Tan, H. [CNNP Nuclear Power Operations Management Co., Ltd., Beijing (China)

    2015-07-01

    Qinshan Nuclear Power Base is located in Haiyan County, Zhejiang Province and adjacent to the picturesque Hangzhou Bay. This area belongs to the Yangtze Delta,which boasts the most dynamic economy in China. It is also in the load center of the East China Grid. Qinshan Nuclear Power Base is the birthplace of the nuclear power industry of China’s mainland, with the maximum installed number of units and capacity. All CANDU 6 Nuclear Power Plants have common or similar design bases, safety analysis bases, equipment life cycles, operating and maintenance practices, and regulatory drivers. However, the CANDU 6 utilities are physically and culturally isolated from one another and, as a result, have been unable to take full advantage of these commonalities in developing proactive strategies and programs, and solutions to common problems.

  20. Technical development of seismic imaging prospecting

    International Nuclear Information System (INIS)

    Xu Guilai

    2006-01-01

    Geophysical methods and apparatus for shallow engineering geophysical prospecting and mining related in-roadway geophysical prospecting are important research fields which has been studied for long time, unfortunately, little significant advancement has been made compared with the demand of engineering geology. The seismic imaging method and its corresponding equipment are viewed as the most hopeful choice for 0-50 m depth and are studied in this research systematically. The recording equipment CSA is made and the related in-situ data processing software is also developed. Field application experiment for shallow seismic prospecting has been finished, the results show that the CSA seismic imaging and its application technology are effective and practical for the engineering geophysical prospecting of 0-50 m depth, and can meet the demand of engineering geology investigation. Hence, the geophysical method and equipment, which can meet the demand for 0-50 m depth engineering geology investigation have been formed through this research. (authors)

  1. Nuclear energy for developing countries

    International Nuclear Information System (INIS)

    Kemery, L.S.

    1980-01-01

    This paper examines the circumstances which must prevail before a reasonable technical, administrative and sociological case can be made to justify the introduction of nuclear power technology to a developing country. The role played by the IAEA in responding to needs of developing countries is considered and problems of nuclear plant safety and materials safeguards discussed. Plans for nuclear power in several developing countries are outlined

  2. Energy for sustainable rural development

    NARCIS (Netherlands)

    Hulscher, W.S.; Hulscher, W.S.; Hommes, E.W.; Hommes, E.W.

    1992-01-01

    Rural energy in developing countries is discussed with a view to sustainable development. The project-oriented approach in rural energy which has often dominated in the past, is contrasted with an overall strategy for sustainable rural energy demand and supply. An outline for a demand-oriented

  3. Technical and economic design of photovoltaic and battery energy storage system

    International Nuclear Information System (INIS)

    Bortolini, Marco; Gamberi, Mauro; Graziani, Alessandro

    2014-01-01

    Highlights: • Design of grid connected photovoltaic system integrating battery energy storage system. • A model to manage the energy flows and assess the system profitability is presented. • The model evaluates the effective PV power rate and battery energy system capacity. • An application and multi-scenario analysis based on an Italian context is discussed. • Results show the system technical feasibility and an energy cost save of 52 €/MW h. - Abstract: In the last years, the technological development and the increasing market competitiveness of renewable energy systems, like solar and wind energy power plants, create favorable conditions to the switch of the electricity generation from large centralized facilities to small decentralized energy systems. The distributed electricity generation is a suitable option for a sustainable development thanks to the environmental impact reduction, the load management benefits and the opportunity to provide electricity to remote areas. Despite the current cut off of the national supporting policies to the renewables, the photovoltaic (PV) systems still find profitable conditions for the grid connected users when the produced energy is self-consumed. Due to the intermittent and random nature of the solar source, PV plants require the adoption of an energy storage system to compensate fluctuations and to meet the energy demand during the night hours. This paper presents a technical and economic model for the design of a grid connected PV plant with battery energy storage (BES) system, in which the electricity demand is satisfied through the PV–BES system and the national grid, as the backup source. The aim is to present the PV–BES system design and management strategy and to discuss the analytical model to determine the PV system rated power and the BES system capacity able to minimize the Levelized Cost of the Electricity (LCOE). The proposed model considers the hourly energy demand profile for a reference

  4. Final Technical Report: Renewable Energy Feasibility Study and Resources Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Rivero, Mariah [BEC Environmental, Inc., Las Vegas, NV (United States)

    2016-02-28

    In March 2011, the U.S. Department of Energy (DOE) awarded White Pine County, Nevada, a grant to assess the feasibility of renewable resource-related economic development activities in the area. The grant project included a public outreach and training component and was to include a demonstration project; however, the demonstration project was not completed due to lack of identification of an entity willing to locate a project in White Pine County. White Pine County completed the assessment of renewable resources and a feasibility study on the potential for a renewable energy-focused economic sector within the County. The feasibility study concluded "all resources studied were present and in sufficient quantity and quality to warrant consideration for development" and there were varying degrees of potential economic impact based on the resource type and project size. The feasibility study and its components were to be used as tools to attract potential developers and other business ventures to the local market. White Pine County also marketed the County’s resources to the renewable energy business community in an effort to develop contracts for demonstration projects. The County also worked to develop partnerships with local educational institutions, including the White Pine County School District, conducted outreach and training for the local community.

  5. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  6. The JMTR operation and technical development, 3

    International Nuclear Information System (INIS)

    1989-10-01

    The JMTR complex consists of a 50MW high neutron flux reactor (JMTR; Japan Materials Testing Reactor), the irradiation facilities, a hot laboratory and a nuclear critical assembly (JMTRC; Japan Materials Testing Reactor Critical Assembly). Many irradiation examinations have been carried out by the capsules, hydraulic rabbits and loop facilities in the JMTR since 1971 when 50MW high power operation was attained. These irradiation facilities and any post irradiation examination equipments have been fabricated, modified and replaced to meet the needs of the times. And now, one gas loop (OGL-1; Oarai Gas Loop-1), two water loops (OWL-2; Oarai Water Loop-2, OSF-1; Oarai Shround Facility-1), two hydraulic rabbits and any capsules are in the JMTR. This report describes the activities of the JMTR project performed in fiscal year 1986∼1988 as following; 1) the operations and maintenances of the JMTR complex, 2) fabrication of the operation backup systems of the reactor and irradiation facilities, 3) JMTR driver fuel enrichment reduce program, 4) the fabrications, modifications and replacements of the irradiation facilities and reactor core components, 5) any irradiation tests by the capsules, 6) developments of the irradiation techniques and post irradiation examination techniques, 7) the fundamental studies to conduct irradiation techniques, 8) future program in the JMTR. (author)

  7. DEVELOPING 3D AWARENESS WHEN TEACHING TECHNICAL DRAFTING

    OpenAIRE

    RADUICA Felix; RUGESCU Ana-Maria Mihaela

    2017-01-01

    This paper details a new method of developing 3D awareness when teaching technical drafting. The latest advancements in technology allow us to develop 3D parts in a virtual environment relatively easy. Allowing students to see the 2D part they are drawing in a 3D presentation may allow them to better understand the concepts of spatiality and planes of view.

  8. Technical Note: Development of a Photobioreactor for Microalgae ...

    African Journals Online (AJOL)

    In view of the technical and biological limitations of open pond systems, a study was conducted to develop a cost-effective experimental photobioreactor that would permit efficient cultivation of microalgae for biodiesel production. The photobioreactor was developed using low cost materi- als, cylindrical translucent tubes ...

  9. Technical Barriers, Gaps,and Opportunities Related to Home Energy Upgrade Market Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, Marcus V.A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-11-01

    This report outlines the technical barriers, gaps, and opportunities that arise in executing home energy upgrade market delivery approaches, as identified through research conducted by the U.S. Department of Energy's Building America program.

  10. Wind Energy Workforce Development & Jobs

    Energy Technology Data Exchange (ETDEWEB)

    Tegen, Suzanne

    2016-11-08

    The United States needs a skilled and qualified wind energy workforce to produce domestic clean power. To assist with wind energy workforce development, the U.S. Department of Energy (DOE) and National Renewable Energy Laboratory are engaged with several efforts.This presentation by Suzanne Tegen describes these efforts, including a wind industry survey, DOE's Wind Career Map, the DOE Wind Vision report, and an in-depth discussion of the Jobs & Economic Development Impacts Model.

  11. The Negative Influence of the Technical Means on Children's Development

    Directory of Open Access Journals (Sweden)

    S. Luparenko

    2014-02-01

    Full Text Available The negative impact of the technical means (computer, TV on children's development is characterized. This negative impact means damage of physical and mental health; lack of positive moral-ethic influence, forming a soulless, spiritless person; children's detachment from real life and their impossibility to realize themselves; increased aggressiveness; disappearance of the components of children subculture; availability (in virtual world of the information which can influence child's development negatively; children's dependence on computer games, Internet-addiction, etc. The recommendations for parents to reduce the negative influence of technical means on children are given.

  12. Technical and political aspects of the generation of electrical energy in the USA

    International Nuclear Information System (INIS)

    Ullmann, K.

    1990-01-01

    The north-east black-out in the 1960s, the Arab oil embargo at the beginning of the 1970s and the nuclear accident at Three Mile Island in the 1970s have profoundly affected the electricity supply industry in the United States. This paper explains the effects of these events on the electricity supply industry from the socio-economic and political points of view. The development trends affecting the present structure of the supply industry are indicated in the context of environmental factors. The technical development of power plant equipment and -systems and also of alternative energy sources in the light of these factors are discussed. (orig.) [de

  13. Offshore wind energy developments

    DEFF Research Database (Denmark)

    Stolpe, Mathias; Buhl, Thomas; Sumer, B. Mutlu

    2014-01-01

    This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services....

  14. Planning for energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    Magai, B S [Dept. of Mech. Eng., IIT Bombay, India

    1975-01-01

    A general review is provided of the national energy resources of India. They include wind power, tidal power, geothermal energy, and nuclear fission and fusion. Their present (1975) contribution to India's total energy requirements and the possibility of their accelerated development and impact on the national economy are discussed. Due to the serious proportions which the energy situation is assuming, it is suggested that a national energy council be set up within the Ministry of Energy to review all matters pertaining to energy, and to assume planning and evaluation responsibilities. It is also recommended that a Department of Energy Research, Development, and Demonstration be established as an autonomous agency which would carry out programs in utilization, conservation, environment, economics, and education. Present efforts by various ministries are fragmented and diverge in policy, leadership, and planning. It is believed that the proposed organizations would coordinate energy programs with national objectives.

  15. Final Technical Report: Development of Post-Installation Monitoring Capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Polagye, Brian [University of Washington

    2014-03-31

    The development of approaches to harness marine and hydrokinetic energy at large-scale is predicated on the compatibility of these generation technologies with the marine environment. At present, aspects of this compatibility are uncertain. Demonstration projects provide an opportunity to address these uncertainties in a way that moves the entire industry forward. However, the monitoring capabilities to realize these advances are often under-developed in comparison to the marine and hydrokinetic energy technologies being studied. Public Utility District No. 1 of Snohomish County has proposed to deploy two 6-meter diameter tidal turbines manufactured by OpenHydro in northern Admiralty Inlet, Puget Sound, Washington. The goal of this deployment is to provide information about the environmental, technical, and economic performance of such turbines that can advance the development of larger-scale tidal energy projects, both in the United States and internationally. The objective of this particular project was to develop environmental monitoring plans in collaboration with resource agencies, while simultaneously advancing the capabilities of monitoring technologies to the point that they could be realistically implemented as part of these plans. In this, the District was joined by researchers at the Northwest National Marine Renewable Energy Center at the University of Washington, Sea Mammal Research Unit, LLC, H.T. Harvey & Associates, and Pacific Northwest National Laboratory. Over a two year period, the project team successfully developed four environmental monitoring and mitigation plans that were adopted as a condition of the operating license for the demonstration project that issued by the Federal Energy Regulatory Commission in March 2014. These plans address nearturbine interactions with marine animals, the sound produced by the turbines, marine mammal behavioral changes associated with the turbines, and changes to benthic habitat associated with colonization

  16. How to develop and write a case for technical writing

    Science.gov (United States)

    Couture, B.; Goldstein, J.

    1981-01-01

    Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

  17. Energy indicators for sustainable development

    International Nuclear Information System (INIS)

    Vera, Ivan; Langlois, Lucille

    2007-01-01

    Energy is an essential factor in overall efforts to achieve sustainable development. Countries striving to this end are seeking to reassess their energy systems with a view toward planning energy programmes and strategies in line with sustainable development goals and objectives. This paper summarizes the outcome of an international partnership initiative on indicators for sustainable energy development that aims to provide an analytical tool for assessing current energy production and use patterns at a national level. The proposed set of energy indicators represents a first step of a consensus reached on this subject by five international agencies-two from the United Nations system (the Department of Economic and Social Affairs and the International Atomic Energy Agency), two from the European Union (Eurostat and the European Environment Agency) and one from the Organization for Economic Cooperation and Development (the International Energy Agency). Energy and environmental experts including statisticians, analysts, policy makers and academics have started to implement general guidelines and methodologies in the development of national energy indicators for use in their efforts to monitor the effects of energy policies on the social, economic and environmental dimensions of sustainable development

  18. Photovoltaic module energy rating methodology development

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  19. Federal role in energy research and development

    International Nuclear Information System (INIS)

    1983-02-01

    The appropriateness of the federal role in each of DOE's major energy R and D programs was evaluated. Several subcriteria were identified by which each program would be judged: (1) the current and expected future scope and amount of private-sector funding relative to requirements for an orderly R and D program; (2) amount of development time to first commercial payoff; (3) degree of market, technical, and policy risks of R and D to private sector development; (4) need for federal energy R and D involvement to support regulatory, environmental, or policy responsibilities. Appropriate primary, complementary, or minimal roles were assigned in each of the energy technology programs: electric-related supply, liquids and gas related supply, conservation and improved end-use utilization, and technology base

  20. Business development in renewable energy

    NARCIS (Netherlands)

    Krozer, Yoram; Visa, Ion

    2014-01-01

    This paper discusses how to foster development of renewable energy business. Factors that impede or enhance renewable energy in the EU 27 member states in the period 1998–2008 are analyzed. Nine factors are considered: population density, production output and energy sector output to indicate market

  1. Technical note: Development of a Linear Flow Channel Reactor for ...

    African Journals Online (AJOL)

    Technical note: Development of a Linear Flow Channel Reactor for sulphur removal ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... 000 mg∙ℓ-1 Na2SO4 solution) and the Liner Flow Channel Reactors (surface area ...

  2. Technical Education and Vocational Training in Developing Nations

    Science.gov (United States)

    Okolie, Ugochukwu Chinonso, Ed.

    2017-01-01

    Severe economic depression and the difficulty to acquire employment with adequate income have significant impact on a nation's social welfare. The need to provide ample educational opportunities is more imperative than ever, particularly in emerging economies. "Technical Education and Vocational Training in Developing Nations" is a…

  3. Technical and scientific support of nuclear power development in Belarus

    International Nuclear Information System (INIS)

    Mikhalevich, A.

    2007-01-01

    In the end of 1986 the construction of the first NPP in Belarus was stopped after Chernobyl accident but investigations in the nuclear field were continued. Recently the decision about nuclear power development has been accepted again. Therefore at present technical and scientific support of managerial, administrative and organisational decisions and activities in this sphere is of great importance. (author)

  4. Renewable Energy Development in Hermosa Beach, California

    Science.gov (United States)

    Morris, K.

    2016-12-01

    The City of Hermosa Beach, California, with the support of the AGU's TEX program, is exploring the potential for renewable energy generation inside the City, as part of the implementation of the City's 2015 Municipal Carbon Neutral Plan. Task 1: Estimate the technical potential of existing and future technologies Given the City's characteristics, this task will identify feasible technologies: wind, solar, tidal/wave, wastewater biogas, landfill biogas, microscale anaerobic digestion (AD), and complementary energy storage. Some options may be open to the City acting alone, but others will require working with municipal partners and private entities that provide services to Hermosa Beach (e.g., wastewater treatment). Energy storage is a means to integrate intermittent renewable energy output. Task 2: Review transaction types and pathways In this task, feasible technologies will be further examined in terms of municipal ordinances and contractual paths: (a) power purchase agreements (PPAs) with developers, under which the City would purchase energy or storage services directly; (b) leases with developers, under which the City would rent sites (e.g., municipal rooftops) to developers; (c) ordinances related to permitting, under which the City would reduce regulatory barriers to entry for developers; (d) pilot projects, under which the City would engage with developers to test new technologies such as wind/wave/microscale AD (pursuant to PPAs and/or leases); and (e) existing projects, under which the City would work with current wastewater and landfill contractors to understand (i) current plans to develop renewable energy, and (ii) opportunities for the City to work with such contractors to promote renewable energy. Task 3: Estimate costs by technology Finally, the last task will gather existing information about the costs, both current and projected, of the feasible technologies, including (i) overnight construction cost (capital); (ii) integration costs (e

  5. Kyiv institutional buildings sector energy efficiency program: Technical assessment

    Energy Technology Data Exchange (ETDEWEB)

    Secrest, T.J.; Freeman, S.L. [Pacific Northwest National Lab., Richland, WA (United States); Popelka, A. [Tysak Engineering, Acton, MA (United States); Shestopal, P.A.; Gagurin, E.V. [Agency for Rational Energy Use and Ecology, Kyiv (Ukraine)

    1997-08-01

    The purpose of this assessment is to characterize the economic energy efficiency potential and investment requirements for space heating and hot water provided by district heat in the stock of state and municipal institutional buildings in the city of Kyiv. The assessment involves three activities. The first is a survey of state and municipal institutions to characterize the stock of institutional buildings. The second is to develop an estimate of the cost-effective efficiency potential. The third is to estimate the investment requirements to acquire the efficiency resource. Institutional buildings are defined as nonresidential buildings owned and occupied by state and municipal organizations. General categories of institutional buildings are education, healthcare, and cultural. The characterization activity provides information about the number of buildings, building floorspace, and consumption of space heating and hot water energy provided by the district system.

  6. Commercial Building Energy Asset Score System: Program Overview and Technical Protocol (Version 1.0)

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Na; Gorrissen, Willy J.

    2013-01-11

    The U.S. Department of Energy (DOE) is developing a national voluntary energy asset score system that includes an energy asset score tool to help building owners evaluate their buildings with respect to the score system. The goal of the energy asset score system is to facilitate cost-effective investment in energy efficiency improvements of commercial buildings. The system will allow building owners and managers to compare their building infrastructure against peers and track building upgrade progress over time. The system can also help other building stakeholders (e.g., building operators, tenants, financiers, and appraisers) understand the relative efficiency of different buildings in a way that is independent from their operations and occupancy. This report outlines the technical protocol used to generate the energy asset score, explains the scoring methodology, and provides additional details regarding the energy asset score tool. This report also describes alternative methods that were considered prior to developing the current approach. Finally, this report describes a few features of the program where alternative approaches are still under evaluation.

  7. Low Energy Accelerator Laboratory Technical Area 53, Los Alamos National Laboratory. Environmental assessment

    International Nuclear Information System (INIS)

    1995-04-01

    This Environmental Assessment (EA) analyzes the potential environmental impacts that would be expected to occur if the Department of Energy (DOE) were to construct and operate a small research and development laboratory building at Technical Area (TA) 53 at the Los Alamos National Laboratory (LANL), Los Alamos, New Mexico. DOE proposes to construct a small building to be called the Low Energy Accelerator Laboratory (LEAL), at a previously cleared, bladed, and leveled quarter-acre site next to other facilities housing linear accelerator research activities at TA-53. Operations proposed for LEAL would consist of bench-scale research, development, and testing of the initial section of linear particle accelerators. This initial section consists of various components that are collectively called an injector system. The anticipated life span of the proposed development program would be about 15 years

  8. Sustainable development and nuclear energy

    International Nuclear Information System (INIS)

    2000-05-01

    This report has four chapters .In the first chapter world energy statute and future plans;in the second chapter Turkey's energy statute and future plans; in the third chapter world energy outlook and in the last chapter sustainable development and nuclear energy has discussed in respect of environmental effects, harmony between generations, harmony in demand, harmony in sociapolitic and in geopolitic. Additional multimedia CD-ROM has included

  9. Technical co-operation for nuclear safety in developing countries

    International Nuclear Information System (INIS)

    Flakus, F.N.; Giuliani, P.

    1984-01-01

    The Agency's programme on technical co-operation for nuclear safety is, largely, responsive in character and the Agency's response is tailored to needs identified by developing countries. However, the Agency's assistance alone is not sufficient: technical co-operation can only be successful and is most effective when there is also a strong input from the counterpart body participating in a particular project. The commitment of national governments is fundamental to success. Technical co-operation is most fruitful if the Agency's assistance capabilities and the recipient country's co-operation capabilities match. Co-operation activities mostly take the form of single projects hosted by individual institutions within a single country; regional and inter-regional projects are also important

  10. Nuclear energy and sustainable development

    International Nuclear Information System (INIS)

    Arts, F.; De Ruiter, W.; Turkenburg, W.C.

    1994-01-01

    The purposes of the title workshop were to exchange ideas on the possible impact of nuclear energy on the sustainable development of the society, to outline the marginal conditions that have to be fulfilled by nuclear energy technology to fit in into sustainable development, to asses and determine the differences or agreements of the workshop participants and their argumentations, and to determine the part that the Netherlands could or should play with respect to a further development and application of nuclear energy. 35 Dutch experts in the field of energy and environment attended the workshop which is considered to be a success. It is recommended to organize a follow-up workshop

  11. Wind Energy Department: Scientific and technical progress 1999-2000

    DEFF Research Database (Denmark)

    2001-01-01

    The activities of the Wind Energy Department fall within boundary layer meteorology, atmospheric turbulence, aerodynamics, aero-acoustics, structural dynamics, machine and construction technology and design of power systems and power system controls. Theobjective is to develop methods for design......; test and siting of wind turbines; prediction of wind loads and wind resources as well as methods to determine the dispersion, transformation and effect of air pollution. The present report describes theorganisation of the department and presents selected scientific highlights and results from the two...

  12. Wind energy department: Scientific and technical progress 1999 - 2000

    International Nuclear Information System (INIS)

    Skrumsager, B.; Larsen, G.

    2001-01-01

    The activities of the Wind Energy Department fall within boundary layer meteorology, atmospheric turbulence, aerodynamics, aero-acoustics, structural dynamics, machine and construction technology and design of power systems and power system controls. The objective is to develop methods for design; test and siting of wind turbines; prediction of wind loads and wind resources as well as methods to determine the dispersion, transformation and effect of air pollution. The present report describes the organisation of the department and presents selected scientific highlights and results from the two-year period 1999-2000. (au)

  13. What drives renewable energy development?

    International Nuclear Information System (INIS)

    Alagappan, L.; Orans, R.; Woo, C.K.

    2011-01-01

    This viewpoint reviews renewable energy development in 14 markets that differ in market structure (restructured vs. not restructured), use of feed-in-tariff (FIT) (yes vs. no), transmission planning (anticipatory vs. reactive), and transmission interconnection cost allocated to a renewable generator (high vs. low). We find that market restructuring is not a primary driver of renewable energy development. Renewable generation has the highest percent of total installed capacity in markets that use a FIT, employ anticipatory transmission planning, and have loads or end-users paying for most, if not all, of the transmission interconnection costs. In contrast, renewable developers have been less successful in markets that do not use a FIT, employ reactive transmission planning, and have generators paying for most, if not all, of the transmission interconnection costs. While these policies can lead to higher penetration of renewable energy in the short run, their high cost to ratepayers can threaten the economic sustainability of renewable energy in the long-run. - Highlights: → Market structure seems to have little effect on renewable energy development. → Renewable energy development is more successful in markets that use a FIT. → Anticipatory transmission planning aids renewable energy development. → Low interconnection costs for developers also aids renewable energy development.

  14. Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

    Science.gov (United States)

    Zheng, Chaocheng

    2017-10-01

    With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

  15. Proceedings of the 8. Brazilian congress on energy: energy policy, regulation and sustainable development. v. 2: energy planning and policy, energy conservation and rational use

    International Nuclear Information System (INIS)

    1999-01-01

    The theme energy policy, regulation and sustainable development chosen for the 8. Brazilian congress on energy to be held in Rio de Janeiro from 30 November of 1999 to 02 December of 1999, specifically means the contribution of energy to a satisfactory quality of life for everyone. Within such a context, the congress technical programme theme has been structured around six different divisions: energy, environment and development; energy sector regulation; energy policy and planning; technology innovation; energy conservation; and renewable energy sources and rural areas energy supply

  16. Proceedings of the 8. Brazilian congress on energy: energy policy, regulation and sustainable development. v. 1: energy, environment and energy sector regulation

    International Nuclear Information System (INIS)

    1999-01-01

    The theme energy policy, regulation and sustainable development chosen for the 8. Brazilian congress on energy to be held in Rio de Janeiro from 30 November of 1999 to 02 December of 1999, specifically means the contribution of energy to a satisfactory quality of life for everyone. Within such a context, the congress technical programme theme has been structured around six different divisions: energy, environment and development; energy sector regulation; energy policy and planning; technology innovation; energy conservation; and renewable energy sources and rural areas energy supply

  17. DEVELOPING 3D AWARENESS WHEN TEACHING TECHNICAL DRAFTING

    Directory of Open Access Journals (Sweden)

    RADUICA Felix

    2017-05-01

    Full Text Available This paper details a new method of developing 3D awareness when teaching technical drafting. The latest advancements in technology allow us to develop 3D parts in a virtual environment relatively easy. Allowing students to see the 2D part they are drawing in a 3D presentation may allow them to better understand the concepts of spatiality and planes of view.

  18. Technical assistance to Department of Energy/Office of Operational Safety Assurance Program for remedial action

    International Nuclear Information System (INIS)

    Denham, D.H.; Cross, F.T.; Kennedy, W.E. Jr.; Marks, S.; Soldat, J.K.; Stenner, R.D.

    1986-01-01

    This project was initiated in FY 1984 to provide technical assistance to the Department of Energy (DOE), Office of Operational Safety (OOS) in developing and implementing its Assurance Program for Remedial Action (APRA), i.e., overview of the DOE remedial action programs. During this second year of the project,* the technical assistance included report and procedure reviews, and assistance with conducting the Uranium Mill Tailings Remedial Action Program (UMTRAP) Office (DOE/AL) appraisal. This included participation in preappraisal visits to UMTRAP sites in Canonsburg, Pennsylvania; Grand Junction, Colorado; and Salt Lake City, Utah. Pacific Northwest Laboratory (PNL) also transferred the PNL-developed document review software to the Oak Ridge Associated Universities (ORAU) staff in Grand Junction, Colorado, in anticipation of future document reviews by the ORAU staff. Other accomplishments have included publication of two formal documents and three project reports, preparation and presentation of five topical reports at national and international meetings, two foreign trip reports, and comments on proposed draft standards of the Environmental Protection Agency (40 CFR 193). The project manager has also participated on National Council on Radiation Protection and Measurements (NCRP) and American Society for Testing and Materials (ASTM) subcommittees developing decommissioning standards, as well as International Atomic Energy Agency (IAEA) advisory groups developing environmental monitoring guidelines

  19. Photovoltaic energy in Mali. Technical and organisational challenges of solar solutions deployment

    International Nuclear Information System (INIS)

    Lacroix, Olivier; Lesaffre, Dominique

    2011-01-01

    In 2008, electricity access rate in rural Mali was below 11%. In view of the challenges of electrification and development of rural areas in Mali, solar energy is seen as a strategic technology. The SIDI has asked ENEA to work on the technical and organisational terms ensuring sustainable access and spreading of photovoltaic systems in rural Mali. As such, in this report, ENEA improves the knowledge of the sector's private actors, suggests support architectures tackling the problematic, and highlights critical points by market segments

  20. Development of Technical Skills: Education, Simulation, and Maintenance of Certification.

    Science.gov (United States)

    Sullivan, Sarah A; Anderson, Barbara M H; Pugh, Carla M

    2015-11-01

    The goal of this article is to provide a focused overview of technical skills education inside the operating room (OR), opportunities for learning outside of the OR (with a focus on simulation), and methods for measuring technical skills. In addition, the authors review the role of maintenance of certification in continuing education and quality improvement and consider the role that simulation plays in this process. The perspectives on teaching in the OR of both residents and faculty going into the case affect the learning environment, and preoperative interactions between attendings and residents to establish learning needs and goals are important. Furthermore, in regards to attending surgeons improving their skills, interaction with more experienced peers and feedback during and after a procedure can be beneficial. Simulation is increasingly being utilized as an education tool outside of the OR. Training in plastic surgery is poised to exploit simulation in multiple technical areas. There is potential to utilize these simulation environments to collect real-time data, such as motion, visual focus, and pressure. How to incorporate technical skill evaluation results in ways that are most beneficial for learning should be the focus of future research and curriculum development. Finally, simulation could be better utilized as a mechanism for both self and peer evaluation and assessment for continuing education and quality improvement. Professional development for faculty and surgery trainees on how to engage with simulation for teaching and learning and how to translate these experiences into improving patient care will be required.

  1. Development of nuclear data library for nucleon-induced reactions on heavy nuclei in wide energy region. Final Project Technical Report on the work performed from 01.12.2003 to 30.04.2007

    Energy Technology Data Exchange (ETDEWEB)

    Yavshits, S G [V.G. Khlopin Radium Institute, St. Petersburg (Russian Federation)

    2011-05-15

    The main goal of the project is to the development of nuclear data calculation technique for innovative hybrid nuclear technologies, first at all for technology of radioactive waste transmutation and energy production. Within the framework of the project two main problems were decided: - development of a reliable code enabling for calculation of main characteristics of nuclear reactions induced by nucleons in wide energy range; - development of nuclear data library containing complete transport files for hybrid accelerator- driven systems. The results of the project have both fundamental and applied character. Within the framework of the project the following main results were obtained: The analysis of experimental and theoretical data for all items in question of new data library; The development of new parameterization of global optical potential which is necessary for entrance channel simulation and development of appropriate subroutines for a code realizing method of coupled channels for reaction cross-section calculations; The updating of existing models and codes and the development of new ones for a fast reaction stage (intranuclear cascade model), preequilibrium stage (model with a multiple emission of particles) and final stage (statistical model of fission/particle emission competition) for reactions with intermediate energy nucleons; The development of model for fission barriers and fission products yield calculations; inclusion of the appropriate subroutines in a statistical code; The test calculations with the code system developed and analysis of the results and comparison with existing experimental data; The systematical calculations for reactions with protons and neutrons (20-1000 MeV) for a wide range of targets; For each reaction (fixed target + projectile (proton or neutron) for fixed energy) the nuclear data file in the ENDF-6 format has been developed, including: - total cross section, reaction cross section and cross section of elastic

  2. H2@Scale: Technical and Economic Potential of Hydrogen as an Energy Intermediate

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark F [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jadun, Paige [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Pivovar, Bryan S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-11-09

    The H2@Scale concept is focused on developing hydrogen as an energy carrier and using hydrogen's properties to improve the national energy system. Specifically hydrogen has the abilities to (1) supply a clean energy source for industry and transportation and (2) increase the profitability of variable renewable electricity generators such as wind turbines and solar photovoltaic (PV) farms by providing value for otherwise potentially-curtailed electricity. Thus the concept also has the potential to reduce oil dependency by providing a low-carbon fuel for fuel cell electric vehicles (FCEVs), reduce emissions of carbon dioxide and pollutants such as NOx, and support domestic energy production, manufacturing, and U.S. economic competitiveness. The analysis reported here focuses on the potential market size and value proposition for the H2@Scale concept. It involves three analysis phases: 1. Initial phase estimating the technical potential for hydrogen markets and the resources required to meet them; 2. National-scale analysis of the economic potential for hydrogen and the interactions between willingness to pay by hydrogen users and the cost to produce hydrogen from various sources; and 3. In-depth analysis of spatial and economic issues impacting hydrogen production and utilization and the markets. Preliminary analysis of the technical potential indicates that the technical potential for hydrogen use is approximately 60 million metric tons (MMT) annually for light duty FCEVs, heavy duty vehicles, ammonia production, oil refining, biofuel hydrotreating, metals refining, and injection into the natural gas system. The technical potential of utility-scale PV and wind generation independently are much greater than that necessary to produce 60 MMT / year hydrogen. Uranium, natural gas, and coal reserves are each sufficient to produce 60 MMT / year hydrogen in addition to their current uses for decades to centuries. National estimates of the economic potential of

  3. Physics and technology of inertial fusion energy targets chambers and drivers. Proceedings of a technical meeting

    International Nuclear Information System (INIS)

    2005-09-01

    The third IAEA Technical Meeting on Physics and Technology of Inertial Fusion Energy Targets and Chambers took place 11-13 October 2004 in the Yousung Hotel Daejon, Republic of Korea. The first meeting was held in Madrid, Spain, 7-9 June 2000, and the second one in San Diego, California, 17-19 June 2002. Nuclear fusion has the promise of becoming an abundant energy source with good environmental compatibility. Excellent progress has been made in controlled nuclear fusion research on both magnetic and inertial approaches for plasma confinement. The IAEA plays a pro-active role to catalyze innovation and enhance worldwide commitment to fusion. This is done by creating awareness of the different concepts of magnetic as well as inertial confinement. The International Fusion Research Council (IFRC) supports the IAEA in the development of strategies to enhance fusion research in Member States. As part of the recommendations, a technical meeting on the physics and technology of inertial fusion energy (IFE) was proposed in one of the council meetings. The objective of the technical meeting was to contribute to advancing the understanding of targets and chambers for all proposed inertial fusion energy power plant designs. The topics to be covered were: Target design and physics, chamber design and physics, target fabrication injection and Tritium handling, assessment of safety, environment and economy aspect of IFE. It was recognized by the International Advisory Committee that the scope of the meeting should also include fusion drivers. The presentations of the meeting included target and chamber physics and technology for all proposed IFE plant concepts (laser driven, heavy-ion driven, Z-pinches, etc.). The final Research Coordination Meeting of the Coordinated Research Project on Elements of Power Plant Design for Inertial Fusion Energy, including further new results and achievements, followed the technical meeting. Twenty-nine participants from 12 countries participated

  4. Towards sustainable development in Austria. Renewable energy contributions

    International Nuclear Information System (INIS)

    Faninger, G.

    2003-01-01

    Besides energy conservation, the exploration of renewable energy sources, in particular biomass and solar energy, are central aspects of the Austrian energy policy, regarded as an optimal option for achieving CO2-emission reduction objectives. The market penetration of Renewable Energy Technologies in the last twenty years was supported by the Austrian Energy Research Programme. The result of successful developments of biomass heating, solar thermal, solar electrical and wind energy technologies is the key for the market development of these renewable energy technologies. With the market penetration of renewable energy technologies new business areas were established and employment created. Today, some renewable energy technologies in Austria have reached economic competitiveness. Some technologies not reached commercialisation, and need more development to improve efficiency, reliability and cost to become commercial. This would include material and system development, pilot plants or field experiments to clarify technical problems, and demonstration plants to illustrate performance capabilities and to clarify problems for commercialisation

  5. Developing markets for renewable energy technologies

    International Nuclear Information System (INIS)

    Charters, W.W.S.

    2001-01-01

    Although renewable energy resources are now being utilised more on a global scale than ever before, there is no doubt their contribution to the energy economy can still be greatly increased. Recently international support for developing these relatively new sources of energy has been driven by their benefits as assessed by reduced environmental impact, particularly reduced greenhouse gas emissions. After several decades of continuous but somewhat erratic funding for research and development of renewables, it is time to take stock of the key issues to be addressed in terms of implementation of major renewable energy programmes on a large scale worldwide. One of the first steps in this process is the identification and encouragement of reliable continuous markets both in developed and developing nations. Future energy policy and planning scenarios should take into account the factors necessary to integrate renewables in all their diverse forms into the normal energy economy of the country. Other critical factors in market development will include the mass production of high quality, reliable and reasonable cost technical products and the provision of adequate finance for demonstrating market ready and near market renewables equipment. Government agencies need to aid in the removal of legislative and institutional barriers hindering the widespread introduction of non-conventional energy sources and to encourage the implementation of government purchasing schemes. Recent moves by companies in Australia to market 'green energy' to customers should also aid in the public awareness of the ultimate potential of renewables leading to greater use in the industrial, commercial and domestic sectors. (author)

  6. Technical development of graphite waste treatment in NUPEC

    International Nuclear Information System (INIS)

    Saishu, S.; Inoue, T.

    2001-01-01

    In Japan, Tokai Power Station, which is a Gas Cooled Reactor and uses graphite as moderator, ceased operation at the end of March in 1998 and it is planned to transfer to decommissioning stage. In this decommissioning stage it is very important to be able to treat and dispose the graphite waste in order to carry out the decommissioning safely and economically. NUPEC has been developing the graphite treatment and disposal technology since 1997 and we introduce the outline of the technical development. For the technology on high density packing into disposal container, the high density packing method and the assessment method on nuclide leaching characteristics were developed, and the cementing test for graphite powder by using Tokai spare graphite was performed and the hydrophobic characteristics between graphite and cement was grasped and the accelerator candidature for affinity was selected. From the view point of economical treatment, the incinerating technology was selected as candidature, and the methods for incinerating graphite and treating off gas are developed. The method of collecting C-14 in off gas was selected for reducing the off gas radiation level. The applicability of actual graphite treatment technology was considered from the view point of safety, economics and preparation of technical standard; the technical theme appeared, the developing planning items were established, and the detailed and actual scale tests will be carried out according to the planning. (author)

  7. DEVELOPMENT OF TECHNICAL DECISIONS FOR HEAT SUPPLY WITH TUBULAR GAS HEATERS

    Directory of Open Access Journals (Sweden)

    IRODOV V. F.

    2017-05-01

    Full Text Available Annotation. Problems formulation. The problem that is solved is the development of autonomous heat supply systems that reduce the capital costs of construction and increase the efficiency of the use of energy resources. One of the ways to solve this problem is the use of tubular gas heaters. For this, it is necessary to develop new technical solutions for heat supply with tubular gas heaters, as well as scientific and methodological support for the development, construction and operation of heat supply systems with tubular gas heaters. Analysis of recent research. Preliminary studies of infrared tubular gas heaters are considered, which were used to heat industrial enterprises with sufficiently high premises. The task was to extend the principles of heat supply by means of tubular heaters for heating air, water and heating medium in relatively low rooms. Goal and tasks. To lay out the development of technical solutions for heat supply with tubular gas heaters, which increase the efficiency and reliability of heat supply systems and extend the use of tubular gas heaters in heat supply. Results. Technical solutions for heat supply with tubular gas heaters have made it possible to extend their applications for heating air, water and heating medium in relatively low rooms. Scientific novelty. New technical solutions for heat supply with tubular gas heaters increase the efficiency of using fuel and energy resources at low capital costs. Practical significance. Technical solutions for heat supply using tubular heaters have the potential for wide application in the heat supply of industrial, public and residential facilities. Conclusions. For two decades, new technical solutions for heat supply with tubular gas heaters have been developed, which increase the efficiency and reliability of heat supply systems and can be widely used for autonomous heating.

  8. Technical and safe development features of modern research reactor

    International Nuclear Information System (INIS)

    Wang Jiaying; Dong Duo

    1998-01-01

    The development trend of research reactor in the world, and development situation in China are introduced. Up to now, some research reactors have serviced for long time and equipment have aged, not to be satisfied for requirement of science and technology development. New research reactors must been developed. The technical features and safe features of new type research reactor in China, for example: multi-pile utilization, compact core of high flux, high automation level of control, reactor two independent shutdown systems, great coefficient of negative temperature, passive safety systems, reliable residual heat removal system are studied

  9. Energy storage. Stakes, technical solutions and valorization opportunities

    International Nuclear Information System (INIS)

    2012-03-01

    As a key factor to allow the continuous growth of renewable energies, energy storage technologies are now more than ever in the spotlight. In order to grasp the stakes, understand the technology diversity, learn relevant orders of magnitudes and comprehend the close intricacy of energy storage with energy and environmental issues, ENEA has published a detailed and well-documented publication on the subject

  10. Report on the present day situation and technical perspectives of renewable energies; Rapport sur l'etat actuel et les perspectives techniques des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Birraux, C; Le Deaut, J Y

    2001-11-01

    This work, carried out by the parliamentary office for the evaluation of scientific and technological choices on request of the French National Assembly and Senate, takes stock of the present day situation and technical perspectives of development of renewable energy sources and of research needs of the French industry in this domain: 1 - renewable energies: key-technologies for the energy supply of developing countries and for a rational consumption in transportation systems and accommodations of developed countries (energies technically different from fossil or nuclear energies; fundamental energy sources for a developing world; different national goals in Europe depending on the available natural resources and on the political realities; a minor interest in France for the domestic power generation but a major interest for transports, residential and tertiary sectors and export); 2 - priority choices given to the French renewable energy resources: renewable electricity (photovoltaic, wind, biomass), thermal technologies (solar, geothermal, biomass); 3 - future policy: sustain of renewable electricity production with the revival of research, industry and technical cooperation. (J.S.)

  11. Report on the present day situation and technical perspectives of renewable energies; Rapport sur l'etat actuel et les perspectives techniques des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    Birraux, C.; Le Deaut, J.Y.

    2001-11-01

    This work, carried out by the parliamentary office for the evaluation of scientific and technological choices on request of the French National Assembly and Senate, takes stock of the present day situation and technical perspectives of development of renewable energy sources and of research needs of the French industry in this domain: 1 - renewable energies: key-technologies for the energy supply of developing countries and for a rational consumption in transportation systems and accommodations of developed countries (energies technically different from fossil or nuclear energies; fundamental energy sources for a developing world; different national goals in Europe depending on the available natural resources and on the political realities; a minor interest in France for the domestic power generation but a major interest for transports, residential and tertiary sectors and export); 2 - priority choices given to the French renewable energy resources: renewable electricity (photovoltaic, wind, biomass), thermal technologies (solar, geothermal, biomass); 3 - future policy: sustain of renewable electricity production with the revival of research, industry and technical cooperation. (J.S.)

  12. 78 FR 23550 - Department of Energy's (DOE) Participation in Development of the International Energy...

    Science.gov (United States)

    2013-04-19

    ... building energy codes by periodically reviewing the technical and economic basis of the voluntary building... and modification of such codes. (42 U.S.C. 6836(b)) B. Background The IECC serves as a model building... building energy codes is through participation in the IECC development process. DOE participates in the ICC...

  13. The Importance of Technical Education for the Development of Society

    Directory of Open Access Journals (Sweden)

    Kozík Tomáš

    2015-12-01

    Full Text Available After 1990, the Slovak Republic saw an emergence of a negative attitude towards technical education at primary schools. However, since the beginning of the 21st century the Government has been aware of the unfavourable development of technical education in Slovakia, and according to its autumn 2012 policy statement, it considered “education, science, research and innovation, information and digitization to be essential pillars of the knowledge-based society and economy”. This statement also indicated support for strengthening of education focused on natural sciences and engineering. One of its main preconditions would be innovation of educational programs at different levels of the educational system in accordance with the requirements of pedagogical practice and in line with current needs of the labour market. Therefore, it will support the education leading to the development of job skills of primary school pupils to ensure professional orientation of students, particularly at secondary vocational schools.

  14. 76 FR 46781 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-08-03

    ..., 2011: 7:30 a.m.-2 p.m.; August 24, 2011: 7:30 a.m.-12:30 p.m. ADDRESSES: I Hotel, 1900 S. First Street... welcome to observe the business of the Biomass Research and Development Technical Advisory Committee. To... ext. 220; E- mail: hq.com ">[email protected] hq.com at least 7 business days prior to the meeting. Members...

  15. The Negative Influence of the Technical Means on Children's Development

    OpenAIRE

    S. Luparenko

    2014-01-01

    The negative impact of the technical means (computer, TV) on children's development is characterized. This negative impact means damage of physical and mental health; lack of positive moral-ethic influence, forming a soulless, spiritless person; children's detachment from real life and their impossibility to realize themselves; increased aggressiveness; disappearance of the components of children subculture; availability (in virtual world) of the information which can influence child's develo...

  16. Ocean Thermal Energy Conversion Life Cycle Cost Assessment, Final Technical Report, 30 May 2012

    Energy Technology Data Exchange (ETDEWEB)

    Martel, Laura [Lockheed Martin, Manassas, VA (United States); Smith, Paul [John Halkyard and Associates: Glosten Associates, Houston, TX (United States); Rizea, Steven [Makai Ocean Engineering, Waimanalo, HI (United States); Van Ryzin, Joe [Makai Ocean Engineering, Waimanalo, HI (United States); Morgan, Charles [Planning Solutions, Inc., Vancouver, WA (United States); Noland, Gary [G. Noland and Associates, Inc., Pleasanton, CA (United States); Pavlosky, Rick [Lockheed Martin, Manassas, VA (United States); Thomas, Michael [Lockheed Martin, Manassas, VA (United States); Halkyard, John [John Halkyard and Associates: Glosten Associates, Houston, TX (United States)

    2012-05-30

    The Ocean Thermal Energy Conversion (OTEC) Life Cycle Cost Assessment (OLCCA) is a study performed by members of the Lockheed Martin (LM) OTEC Team under funding from the Department of Energy (DOE), Award No. DE-EE0002663, dated 01/01/2010. OLCCA objectives are to estimate procurement, operations and maintenance, and overhaul costs for two types of OTEC plants: -Plants moored to the sea floor where the electricity produced by the OTEC plant is directly connected to the grid ashore via a marine power cable (Grid Connected OTEC plants) -Open-ocean grazing OTEC plant-ships producing an energy carrier that is transported to designated ports (Energy Carrier OTEC plants) Costs are developed using the concept of levelized cost of energy established by DOE for use in comparing electricity costs from various generating systems. One area of system costs that had not been developed in detail prior to this analysis was the operations and sustainment (O&S) cost for both types of OTEC plants. Procurement costs, generally referred to as capital expense and O&S costs (operations and maintenance (O&M) costs plus overhaul and replacement costs), are assessed over the 30 year operational life of the plants and an annual annuity calculated to achieve a levelized cost (constant across entire plant life). Dividing this levelized cost by the average annual energy production results in a levelized cost of electricity, or LCOE, for the OTEC plants. Technical and production efficiency enhancements that could result in a lower value of the OTEC LCOE were also explored. The thermal OTEC resource for Oahu, Hawaii and projected build out plan were developed. The estimate of the OTEC resource and LCOE values for the planned OTEC systems enable this information to be displayed as energy supplied versus levelized cost of the supplied energy; this curve is referred to as an Energy Supply Curve. The Oahu Energy Supply Curve represents initial OTEC deployment starting in 2018 and demonstrates the

  17. Satellite power system concept development and evaluation program system definition technical assessment report

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW of electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.

  18. Some technical implications of Klein's concept of 'premature ego development'.

    Science.gov (United States)

    Mitrani, Judith L

    2007-08-01

    In this paper, the author revisits the problem of 'premature ego development' first introduced by Melanie Klein in 1930. She also highlights several developments in post-Kleinian thinking since the publication of that paper, which can be seen as offshoots of or complements to Klein's work. The author proposes a link between this category of precocious development and the absence of the experience of what Bion termed the 'containing object.' She puts forward several technical considerations relevant to analytic work with patients who suffer as a result of early developmental failures and presents various clinical vignettes in order to demonstrate the ways in which these considerations take shape in the analytic setting.

  19. Developments in high energy theory

    Indian Academy of Sciences (India)

    journal of. July 2009 physics pp. 3–60. Developments in high energy theory .... and operated by CERN (European Organization for Nuclear Research), this ma- ...... [2] S Dodelson, Modern cosmology (Academic Press, Amsterdam, 2003).

  20. 78 FR 16849 - Alaska Energy Authority; Notice of Dispute Resolution Panel Meeting and Technical Conference

    Science.gov (United States)

    2013-03-19

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 14241-000] Alaska Energy Authority; Notice of Dispute Resolution Panel Meeting and Technical Conference On March 8, 2013, Commission staff, in response to the filing of a notice of [[Page 16850

  1. 2011 Residential Energy Efficiency Technical Update Meeting Summary Report: Denver, Colorado - August 9-11, 2011

    Energy Technology Data Exchange (ETDEWEB)

    2011-11-01

    This report provides an overview of the U.S. Department of Energy Building America program's Summer 2011 Residential Energy Efficiency Technical Update Meeting. This meeting was held on August 9-11, 2011, in Denver, Colorado, and brought together more than 290 professionals representing organizations with a vested interest in energy efficiency improvements in residential buildings.

  2. Waste-to-energy: Technical, economic and ecological point of views

    International Nuclear Information System (INIS)

    Cassitto, L.

    1997-01-01

    Overwhelming waste-recycling should be considered more as a psychological than as a technological method to deal with wastes. The best waste disposal systems should actually grant mass or energy recovery from technical, economic and ecological point-of-views. Highest results seem to be granted by waste-to-energy technologies since energy content is the best preserved property after using materials

  3. Preliminary assessment on the competency of technical staff of Atomic Energy Licensing Board

    International Nuclear Information System (INIS)

    Marina Mishar; Redzuwan Yahya

    2010-01-01

    The main purpose of this study is to carry out a preliminary assessment on the competency level of technical staff of Atomic Energy Licensing Board (AELB), the nuclear regulatory body in Malaysia for effectively monitoring and supervising the activities of the first nuclear power plant in Malaysia. The study is conducted out on the whole group of AELB technical staff, comprising 81 personnel from the supporting and professional categories. Findings showed that AELB technical staff who have been in the workforce for more than ten years have the required competency level for legal and regulatory processes competencies, regulatory practices competencies and effectiveness in personal and inter-personal competencies. Regression analysis between competency and working experience (length of service) showed a weak positive correlation, which could be contributed by job not related to the competency parameters for major functions of a regulatory body in controlling nuclear activity of a nuclear power plant. Results obtained could assist AELB in manpower development once Malaysia makes the decision to embark on a nuclear power programme. (author)

  4. Solar Energy Technologies Program: Multi-Year Technical Plan 2003-2007 and Beyond

    Energy Technology Data Exchange (ETDEWEB)

    2004-01-01

    This publication charts a 5-year planning cycle for the U.S. Department of Energy Solar Energy Technologies Program. The document includes anticipated technical plans for the next 5 years for photovoltaics, concentrating solar power, solar water and space heating, solar hybrid lighting, and other new concepts that can take advantage of the solar resource. Solar energy is described as a clean, abundant, renewable energy resource that can benefit the nation by diversifying our energy supply.

  5. Assessment of the Technical Potential for Achieving Net Zero-Energy Buildings in the Commercial Sector

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, B.; Long, N.; Torcellini, P.; Judkoff, R.; Crawley, D.; Ryan, J.

    2007-12-01

    This report summarizes the findings from research conducted at NREL to assess the technical potential for zero-energy building technologies and practices to reduce the impact of commercial buildings on the U.S. energy system. Commercial buildings currently account for 18% of annual U.S. energy consumption, and energy use is growing along with overall floor area. Reducing the energy use of this sector will require aggressive research goals and rapid implementation of the research results.

  6. Wind Energy Career Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Gwen Andersen

    2012-03-29

    Saint Francis University has developed curriculum in engineering and in business that is meeting the needs of students and employers (Task 1) as well as integrating wind energy throughout the curriculum. Through a variety of approaches, the University engaged in public outreach and education that reached over 2,000 people annually (Task 2). We have demonstrated, through the success of these programs, that students are eager to prepare for emerging jobs in alternative energy, that employers are willing to assist in developing employees who understand the broader business and policy context of the industry, and that people want to learn about wind energy.

  7. Energy savings in traffic, technical possibilities. Energiansaeaestoe liikenteessae, tekniset mahdollisuudet

    Energy Technology Data Exchange (ETDEWEB)

    Alppivuori, K; Himanen, V [Valtion Teknillinen Tutkimuskeskus, Espoo (Finland). Tie- ja Liikennelab.

    1991-01-01

    The fuel consumption of passenger cars can be reduced in many ways. Decreasing the drag coefficient cuts down on the consumption with 3-10% calculated on the basis of the total consumption of passenger cars. Decreasing the cubic capacity of the engine with 200 ccm reduces the consumption with 12-24%. Introduction of small city cars (engine capacity of less than 660 ccm) gives a reduction of 8-13%, changing over to diesel engines gives a reduction of 20-3% and to small two-stroke engines a reduction of 30%. Changing over to electric cars in cities and in the short-distance traffic of cities would reduce the consumption of liquid fuel in traffic with passenger cars with 30-40%, but it would require using of the power of six power plants (total 3000 MW) for charging in the night-time. The consumption of liquid fuel of buses varies considerably according to the bus and the driving conditions in question. Developing of the qualities of a car may produce a saving of 5-15% in its energy consumption. Additionally, optimized use of a car can produce a saving of 5-10%. In future, the boundary between delivery vans and lorries may blur when new types of distribution systems will be introduced. The possibilities of saving fuel will be considerably good, up to 30-49% for delivery vans and light lorries, and 20-30% for heavy lorries. The development of traffic is a result of the traffic policy of the public administration and the behaviour of private people. Background factors are various measures of car manufacturers and marketing organizations. The prevailing development will lead to a steady growth of consumption of liquid fuel in the traffic.

  8. A holistic method for selecting tidal stream energy hotspots under technical, economic and functional constraints

    International Nuclear Information System (INIS)

    Vazquez, A.; Iglesias, G.

    2016-01-01

    Highlights: • A method for selecting the most suitable sites for tidal stream farms was presented. • The selection was based on relevant technical, economic and functional aspects. • As a case study, a model of the Bristol Channel was implemented and validated. - Abstract: Although a number of prospective locations for tidal stream farms have been identified, the development of a unified approach for selecting the optimum site in a region remains a current research topic. The objective of this work is to develop and apply a methodology for determining the most suitable sites for tidal stream farms, i.e. sites whose characteristics maximise power performance, minimise cost and avoid conflicts with competing uses of the marine space. Illustrated through a case study in the Bristol Channel, the method uses a validated hydrodynamics model to identify highly energetic areas and a geospatial Matlab-based program (designed ad hoc) to estimate the energy output that a tidal farm at the site with a given technology would have. This output is then used to obtain the spatial distribution of the levelised cost of energy and, on this basis, to preselect certain areas. Subsequently, potential conflicts with other functions of the marine space (e.g. fishing, shipping) are considered. The result is a selection of areas for tidal stream energy development based on a holistic approach, encompassing the relevant technical, economic and functional aspects. This methodology can lead to a significant improvement in the selection of tidal sites, thereby increasing the possibilities of project acceptance and development.

  9. Technical viability and development needs for waste forms and facilities

    Energy Technology Data Exchange (ETDEWEB)

    Pegg, I.; Gould, T.

    1996-05-01

    The objective of this breakout session was to provide a forum to discuss technical issues relating to plutonium-bearing waste forms and their disposal facilities. Specific topics for discussion included the technical viability and development needs associated with the waste forms and/or disposal facilities. The expected end result of the session was an in-depth (so far as the limited time would allow) discussion of key issues by the session participants. The session chairs expressed allowance for, and encouragement of, alternative points of view, as well as encouragement for discussion of any relevant topics not addressed in the paper presentations. It was not the intent of this session to recommend or advocate any one technology over another.

  10. Office of Crystalline Repository Development FY 83 technical project plan

    International Nuclear Information System (INIS)

    1983-03-01

    The technical plan for FY 83 activities of the Office of Crystalline Repository Development is presented in detail. Crystalline Rock Project objectives are discussed in relation to the National Waste Terminal storage (NWTS) program. The plan is in full compliance with requirements mandated by the Nuclear Waste Policy Act of 1982. Implementation will comply with the requirements and criteria set forth in the Nuclear Regulatory Commission regulations (10 CFR 60) and the Environmental Protection Agency standard (40 CFR 191). Technical approaches and the related milestones and schedules are presented for each of the Level 3 NWTS work Breakdown Structure Tasks. These are: Systems, Waste Package, Site, Repository, Regulatory and Institutional, Test Facilities and Excavations, Land Acquisition, and Program Management

  11. Technical Progress and Development Directions of Oceanic Spatial Information Datum

    Directory of Open Access Journals (Sweden)

    BAO Jingyang

    2017-10-01

    Full Text Available This paper briefly analyzes the basic development and technical situation of oceanic spatial information datum, reviews the main processes of oceanic vertical datum and correlative oceanic tidal study, such as improvement and perfect methods of determining tidal station vertical datum, realizing form of vertical datum controlled by tidal station, effect on maintaining vertical datum by long-term tidal station, oceanic tidal model establishing, and also construction and transformation of tidal datum, and then forecasts the key development directions of oceanic spatial information datum on high-accuracy marine position service, vertical datum and the transferring model refinement and spatial datum application.

  12. 75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

    Science.gov (United States)

    2010-06-21

    ... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

  13. Socio-technical barriers to the use of energy-efficient timber drying technology in New Zealand

    International Nuclear Information System (INIS)

    Bell, Martha; Carrington, Gerry; Lawson, Rob; Stephenson, Janet

    2014-01-01

    This study of industrial energy behaviours identifies barriers to the use of energy-efficient drying technology in the New Zealand timber industry, and explores these barriers through the “energy cultures” lens. Vented kiln dryers were preferred by larger firms and heat pump kiln dryers were used by smaller firms. Although few firms could specify all their costs, we found no significant differences in the average operating costs, drying costs or commercial success of the larger and smaller firms. We found that socio-technical barriers create “energy cultures” at the level of both the firm and the sector, supporting the dominance of vented kiln dryers. The prevailing technologies, practices and norms at the sector level strongly support vented kilns, the status quo being embedded in the socio-technical context, hindering technological learning, improved energy efficiency and innovation. Influential stakeholders in the industry were thus part of, and locked into, the industry-wide energy culture, and were not in a position to effect change. We conclude that actors external to the prevailing industry energy culture need to leverage change in the industry norms, practices and/or technologies in order to reap the advantages of energy-efficient drying technology, assist its continued evolution and avoid the risks of path-dependency. - Highlights: • Firms processing timber in New Zealand use two main drying technologies. • Relatively inefficient vented dryers dominate over energy-efficient heat pumps. • Operating costs are similar but the socio-technical regime supports vented dryers. • Stasis is created by fixed energy cultures both within firms and across the sector. • Stasis hampers technical development in heat pump drying and business innovation

  14. Developing Government Renewable Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Kurt S. Myers; Thomas L. Baldwin; Jason W. Bush; Jake P. Gentle

    2012-07-01

    The US Army Corps of Engineers has retained Idaho National Laboratory (INL) to conduct a study of past INL experiences and complete a report that identifies the processes that are needed for the development of renewable energy projects on government properties. The INL has always maintained expertise in power systems and applied engineering and INL’s renewable energy experiences date back to the 1980’s when our engineers began performing US Air Force wind energy feasibility studies and development projects. Over the last 20+ years of working with Department of Defense and other government agencies to study, design, and build government renewable projects, INL has experienced the do’s and don’ts for being successful with a project. These compiled guidelines for government renewable energy projects could include wind, hydro, geothermal, solar, biomass, or a variety of hybrid systems; however, for the purpose of narrowing the focus of this report, wind projects are the main topic discussed throughout this report. It is our thought that a lot of what is discussed could be applied, possibly with some modifications, to other areas of renewable energy. It is also important to note that individual projects (regardless the type) vary to some degree depending on location, size, and need but in general these concepts and directions can be carried over to the majority of government renewable energy projects. This report focuses on the initial development that needs to occur for any project to be a successful government renewable energy project.

  15. Zero energy reactor RB technical characteristics and experimental possibilities

    Energy Technology Data Exchange (ETDEWEB)

    Jovanovic, S; Takac, S; Raisic, N; Lolic, B; Markovic, H [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

    1963-04-15

    The zero energy reactor RB was constructed in 1958 in accordance with the nuclear reactor development programme of the Boris Kidric Institute of Nuclear Sciences. The reactor was in operation until the middle of 1959 when the heavy water, serving as the moderator, was transported to the high flux reactor RA, built at the same time at the Boris Kidric Institute. Owing to the fact that the purchase of new quantities of heavy water was planned for 1961 it was decided to reconstruct the RB reactor in order to improve the safety of the system and to obtain better flexibility in performing the experiments. New control, safety and radiation monitoring systems were constructed. Some changes were also made on the reactor tank, water circulation system and the water level monitoring equipment. The reconstruction was completed in 1961. and the heavy water was delivered early in 1962. The reconstructed reactor was critical for the first time in summer 1962, and from that time was in continuous operation. This report presents an outline of the design and construction characteristics of the reactor. The main intention is to inform potential users of the reactor about experimental possibilities, advantages and disadvantages of such a critical facility.

  16. Zero energy reactor RB technical characteristics and experimental possibilities

    International Nuclear Information System (INIS)

    Jovanovic, S.; Takac, S.; Raisic, N.; Lolic, B.; Markovic, H.

    1963-04-01

    The zero energy reactor RB was constructed in 1958 in accordance with the nuclear reactor development programme of the Boris Kidric Institute of Nuclear Sciences. The reactor was in operation until the middle of 1959 when the heavy water, serving as the moderator, was transported to the high flux reactor RA, built at the same time at the Boris Kidric Institute. Owing to the fact that the purchase of new quantities of heavy water was planned for 1961 it was decided to reconstruct the RB reactor in order to improve the safety of the system and to obtain better flexibility in performing the experiments. New control, safety and radiation monitoring systems were constructed. Some changes were also made on the reactor tank, water circulation system and the water level monitoring equipment. The reconstruction was completed in 1961. and the heavy water was delivered early in 1962. The reconstructed reactor was critical for the first time in summer 1962, and from that time was in continuous operation. This report presents an outline of the design and construction characteristics of the reactor. The main intention is to inform potential users of the reactor about experimental possibilities, advantages and disadvantages of such a critical facility

  17. The position, role and development prospects of nuclear energy in China energy system

    International Nuclear Information System (INIS)

    Zheng Yuhui; Yan Jimin

    1996-12-01

    The fundamental features of the present energy system of China are discussed and analyzed. and it is pointed out that since the founding of the People's Republic of China, although the energy construction, including the development and use of nuclear energy, has achieved great success, the average energy resource per capita is still low. The following major issues, such as the transportation pressure raised from the energy structure of taking coal as the main, the increasing seriousness of environmental pollution, large amount of greenhouse gases emission and low 'energy efficiency', etc., have constrained the sustainable development of national economy and society. In accordance with the position of nuclear energy in the strategy of the energy development in south-east coastal areas of China, and the analysis of 'value criteria' and 'decision goal' system for the development and use of nuclear energy, it is thought the development of nuclear energy is an important way and the optimum selection to optimize China's energy system. In accordance with the fundamental policy and technical line, and the technical ability and foundation conditions, the strategic target, scale and overall arrangement for the development of China's nuclear power are proposed and the bright future for the development of China's nuclear power industry is comprehensively discussed and analyzed. (14 refs., 7 figs., 20 tabs.)

  18. Technical challenges to energy systems' operation and markets

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, P.; Meibom, P.; Gehrke, O. [Risoe National Lab. (Denmark); Oestergaard, J. [Technical Univ. of Denmark (Denmark)

    2006-11-15

    A future energy system that includes a high proportion of renewable energy will be expected to meet the same requirements for security of supply and economic efficiency as the energy systems of today, while delivering better environmental performance, especially with regard to CO{sub 2} emissions. Security of supply refers to the long-term reliability of fuel supply; especially in power systems, it also covers short-term requirements for system stability and adequacy. Economic efficiency is concerned with getting the best from the significant amounts of money, human capital and natural resources involved in an energy system. Integral to economic efficiency in energy systems is the presence of well-functioning markets for energy services. The variability and reduced predictability of a number of renewable energy sources, notably wind power, create specific challenges for future energy systems compared to those of today. Power transmission will also become an issue, as the areas with good potential for wind power and wave energy are often located some distance from the centres of power consumption. This chapter describes the challenges involved, and possible solutions to these, with a focus on power systems. The chapter is divided into two sections reflecting the fact that some challenges relate to managing the power system in its normal operation mode, whereas others are specific to fault conditions. (au)

  19. Great Plains Wind Energy Transmission Development Project

    Energy Technology Data Exchange (ETDEWEB)

    Brad G. Stevens, P.E.; Troy K. Simonsen; Kerryanne M. Leroux

    2012-06-09

    In fiscal year 2005, the Energy & Environmental Research Center (EERC) received funding from the U.S. Department of Energy (DOE) to undertake a broad array of tasks to either directly or indirectly address the barriers that faced much of the Great Plains states and their efforts to produce and transmit wind energy at the time. This program, entitled Great Plains Wind Energy Transmission Development Project, was focused on the central goal of stimulating wind energy development through expansion of new transmission capacity or development of new wind energy capacity through alternative market development. The original task structure was as follows: Task 1 - Regional Renewable Credit Tracking System (later rescoped to Small Wind Turbine Training Center); Task 2 - Multistate Transmission Collaborative; Task 3 - Wind Energy Forecasting System; and Task 4 - Analysis of the Long-Term Role of Hydrogen in the Region. As carried out, Task 1 involved the creation of the Small Wind Turbine Training Center (SWTTC). The SWTTC, located Grand Forks, North Dakota, consists of a single wind turbine, the Endurance S-250, on a 105-foot tilt-up guyed tower. The S-250 is connected to the electrical grid on the 'load side' of the electric meter, and the power produced by the wind turbine is consumed locally on the property. Establishment of the SWTTC will allow EERC personnel to provide educational opportunities to a wide range of participants, including grade school through college-level students and the general public. In addition, the facility will allow the EERC to provide technical training workshops related to the installation, operation, and maintenance of small wind turbines. In addition, under Task 1, the EERC hosted two small wind turbine workshops on May 18, 2010, and March 8, 2011, at the EERC in Grand Forks, North Dakota. Task 2 involved the EERC cosponsoring and aiding in the planning of three transmission workshops in the midwest and western regions. Under Task

  20. Technical efficiency of economic systems of EU-15 countries based on energy consumption

    International Nuclear Information System (INIS)

    Bampatsou, Christina; Papadopoulos, Savas; Zervas, Efthimios

    2013-01-01

    In the present study, Data Envelopment Analysis is used to determine the Technical Efficiency index of EU-15 countries from 1980 to 2008, using cross-country comparison. Technical Efficiency index represents the capacity of an economy to produce a higher level of Gross Domestic Product for a given level of total energy input. The level of the Technical Efficiency index is determined from the energy mix (fossil fuels, non-fossil fuels, nuclear energy) of each country and depends on the maximization level of the production of the Gross Domestic Product of the economic system, without waste of energy resources. The current study is applied in the case of the EU15 countries. Its scope is to highlight the differentiations of country classifications before and after the integration of nuclear energy in the energy mix of each country. The main result is that the integration of nuclear energy as an additional input in the energy mixture affects negatively the Technical Efficiency of countries. Also, when an economy achieves a decrease of the energy consumption produced from fossil fuels, and a better exploitation of renewable energy sources, clearly improves its capacity to produce more output with the given levels of inputs. - Highlights: ► Technical efficiency index of EU-15 countries is determined through the DEA method. ► Level of the TE index is determined from the energy mix used in each country. ► TE level depends on the maximization level of GDP without waste of energy resources. ► Capacity of an economy to produce more GDP for a given energy input is determined. ► TE differentiation before and after the integration of nuclear energy is performed

  1. Clean energy for sustainable development

    International Nuclear Information System (INIS)

    Piro, P.

    2002-01-01

    The question of energy in developing countries is now taking an increasingly significant place on the agenda of the major international forums. It is to be a central issue at the UN Summit on Sustainable Development in Johannesburg next August. (author)

  2. Wind Energy for Sustainable Development

    International Nuclear Information System (INIS)

    Comsan, M.N.H.

    2009-01-01

    The growing demand in energy and concern about depleting natural resources and global warming has led states worldwide to consider alternatives to the use of fossil fuel for energy production. Several countries especially in Europe have already increased their renewable energy share 6-10%, expected to increase to 20% by the year 2020. For Egypt excellent resources of wind and solar energy exist. The article discusses perspectives of wind energy in Egypt with projections to generate ∼ 3.5 GWe by 2022, representing ∼ 9% of the total installed power at that time (40.2 GW). Total renewable (hydro + wind + solar) are expected to provide ∼ 7.4 GWe by 2022 representing ∼ 19% of the total installed power. Such a share would reduce dependence on depleting oil and gas resources, and hence improve country's sustainable development

  3. Valuable technical advice in sale of energy utility

    International Nuclear Information System (INIS)

    Roggen, M.

    2005-01-01

    The buying and merging of energy companies is a dynamic market. Merging companies is a complex process. The expertise of the Dutch research institute for the electric power industry KEMA can be used to support potential buyers of energy companies [nl

  4. Technical Challenges in Developing Software to Collect Twitter Data

    Directory of Open Access Journals (Sweden)

    Daniel Chudnov

    2014-10-01

    Full Text Available Over the past two years, George Washington University Libraries developed Social Feed Manager (SFM, a Python and Django-based application for collecting social media data from Twitter. Expanding the project from a research prototype to a more widely useful application has presented a number of technical challenges, including changes in the Twitter API, supervision of simultaneous streaming processes, management, storage, and organization of collected data, meeting researcher needs for groups or sets of data, and improving documentation to facilitate other institutions’ installation and use of SFM. This article will describe how the Social Feed Manager project addressed these issues, use of supervisord to manage processes, and other technical decisions made in the course of this project through late summer 2014. This article is targeted towards librarians and archivists who are interested in building collections around web archives and social media data, and have a particular interest in the technical work involved in applying software to the problem of building a sustainable collection management program around these sources.

  5. Energy Development Opportunities for Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Larry Demick

    2012-11-01

    The Wyoming Business Council, representing the state’s interests, is participating in a collaborative evaluation of energy development opportunities with the NGNP Industry Alliance (an industry consortium), the University of Wyoming, and the US Department of Energy’s Idaho National Laboratory. Three important energy-related goals are being pursued by the State of Wyoming: Ensuring continued reliable and affordable sources of energy for Wyoming’s industries and people Restructuring the coal economy in Wyoming Restructuring the natural gas economy in Wyoming

  6. Technical review of the high energy gas stimulation technique

    Energy Technology Data Exchange (ETDEWEB)

    Haney, B.; Cuthill, D. [Computalog Ltd., Calgary, AB (Canada)

    1997-08-01

    High Energy Gas Stimulation (HEGS) or propellant stimulation is a process that enhances production of oil wells by decreasing wellbore damage and increasing near wellbore permeability. The technique has been used on about 7,000 wells with varying results. The HEGS tool is a cast cylinder of solid rocket propellant with a central ignition system. The propellant is fired and as it burns it produces a pressure load on the formation, increasing fracture volume which enhances the flow channels. Background information on the development and application of this stimulation technique was provided. The introduction of fractures around a wellbore is dependent on the pressure loading rate and the dynamic response of the rock. Propellant stimulation relies on controlling the pressure-time behaviour to maximize fracture growth by fluid pressurization. The process is composed of 3 sequential phases: (1) wellbore pressurization, (2) fracture initiation, and (3) fracture extension. A full description of each of these phases was provided. Geologic and well-tool factors that have a significant influence on the fracturing process such as in-situ stress, natural fractures and flaws, formation mechanical properties, formation fluid and flow properties, formation thermal properties, and wellbore, tool, and tamp configuration, were also reviewed. The many applications for HEGS were presented. It was emphasized that the success of HEGS is dependent on pre-stimulation problem evaluation and on proper charge design. Since HEGS will decrease near-wellbore restrictions and initiate formation breakdown, it should only be used in cases where this will be beneficial to the well. Careful attention to engineering will optimize results. 21 refs., 13 figs.

  7. Technical-economic analysis of electric energy storage systems

    International Nuclear Information System (INIS)

    Stefanescu, Florian; Curuia, Marian; Brad, Sebastian; Anghel, Mihai; Stefanescu, Ioan

    2009-01-01

    Fluctuations in electric energy consumption and changes that affected last years the electric energy market, as well, entail perturbations in transport and distribution systems due to outrunning of their current physical capacities. Consequently, storing the electric energy in buffer systems appears to be a must owing to its strategic and economical importance. Indeed, it can enhance firmly the capacity of fulfilling the electric energy demands in real time and so, avoiding the blackout events caused by disruptions in power supply . Also, of great importance is the role of energy storing systems as backing ancillaries for promoting variable or uncertain renewable sources (like photovoltaic or wind sources). The Superconducting Magnetic Energy Storage (SMES) is a promising system of direct storing of electricity by means of magnetic energy deposing in a short-circuited superconducting loop. However difficulties related to the use o superconducting systems and cryogenic temperatures (concerning construction and maintenance) hinder at present the application of SMES systems on a scale larger than some particular applications. Actually, owing to the lack of alternative solutions the rather high costs are accepted in such cases

  8. Key technical and non-technical challenges for mass deployment of photovoltaic solar energy (PV)

    International Nuclear Information System (INIS)

    Sinke, W.C.

    2001-12-01

    Photovoltaic solar energy (PV) is used for direct conversion of sunlight into electricity. It is not to be confused with low-temperature thermal solar energy (e.g. solar domestic hot water systems) and with solar electricity production using a conventional high-temperature steam cycle (using parabolic troughs or 'power towers'). Important features of PV are: inherently renewable; sustainable if well designed, manufactured, used, and disposed; no moving parts, quiet; reliable if well designed and engineered; modular (from milliwatts to multi-megawatts); suitable for a wide variety of applications (stand-alone and grid-connected); large potential (regionally and globally); intermittent; capacity factor (ratio of average system power to installed (=peak) power) =0.08-0.24. PV is among the major renewable energy technologies in all well known energy scenarios, although a substantial role in % of the total energy production can only be achieved on the long term (typically 40-60 years years). Fortunately, long before that the PV market may be a rapidly growing, multi-billion euro business, providing enormous economic opportunities and many jobs

  9. Critical technical issues and evaluation and comparison studies for inertial fusion energy reactors

    International Nuclear Information System (INIS)

    Abdou, M.A.; Ying, A.Y.; Tillack, M.S.; Ghoniem, N.M.; Waganer, L.M.; Driemeyer, D.E.; Linford, G.J.; Drake, D.J.

    1994-01-01

    The critical issues, evaluation and comparison of two inertial fusion energy (IFE) reactor design concepts developed in the Prometheus studies are presented. The objectives were (1) to identify and characterize the critical issues and the R and D required to solve them, and (2) to establish a sound basis for future IFE technical and programmatic decisions by evaluating and comparing the different design concepts. Quantitative evaluation and comparison of the two design options have been made with special focus on physics feasibility, engineering feasibility, economics, safety and environment, and research and development (R and D) requirements. Two key conclusions are made based on the overall evaluation analysis: (1) The heavy-ion driven reactors appear to have an overall advantage over laser-driven reactors; and: (2) The differences in scores are not large and future results of R and D could change the overall ranking of the two IFE concepts

  10. Final Technical Report: "Achieving Regional Energy Efficiency Potential in the Southeast”

    Energy Technology Data Exchange (ETDEWEB)

    Mahoney, Mandy [Southeast Energy Efficiency Alliance (SEEA), Atlanta, GA (United States)

    2018-03-07

    The overall objective of this award was to facilitate sharing of DOE resources and best practices as well as provide technical assistance to key stakeholders to support greater compliance with energy efficiency standards and increased energy savings. The outcomes of this award include greater awareness among key stakeholders on energy efficiency topics, increased deployment and utilization of DOE resources, and effective policies and programs to support energy efficiency in the Southeast.

  11. Trace of the 'Fugen' project. Its technical development results to be succeeded

    International Nuclear Information System (INIS)

    Ishikure, Kenkichi; Kikuchi, Saburo; Kobayashi, Hiromasa; Hino, Minoru

    2003-01-01

    A prototype reactor of the advanced thermal reactor (ATR), 'Fugen' will be finished its operation on March, 2003. And, the 'Fugen' project advanced by self technology development has largely contributed to nuclear energy development in Japan at various fields. Nuclear energy is now laid at change of its environment without previous experiences, such as relaxation of regulation, liberalization of electric powers, cost down, and so on. A history on challenge of self technology development must be valuable experiences essential for present and future nuclear energy. To succeed results with and without shapes obtained by the 'Fugen', to generation sharing coming future, here were investigated verifications on its technical results and self technology development results and how their results are activated to future. (G.K.)

  12. Technical-economic study of the development of a hydrogen-based energy system in Venezuela; Estudio tecnico-economico del desarrollo en Venezuela de un sistema energetico basado en el hidrogeno

    Energy Technology Data Exchange (ETDEWEB)

    Posso, F. [ULA-Tachira. San Cristobal (Venezuela)] email: fausto@ula.ve; Contreras, A. [ETSII-UNED (Venezuela)

    2009-09-15

    The feasibility of the development in Venezuela of a hydroelectric/hydrogen energy system (HHES) was studied. The application of this system is intended for rural sectors in the country with no available permanent and safe energy services. The study was conducted by developing and later simulating a mathematical model for each of the components of the energy system: transformation, storage, transport, distribution and final use. Structurally, the models are composed of an energy sub-model and a cost sub-model. The HHES model as a whole is obtained from the connection of the models and the components. The simulation is performed for operating conditions and parameter values that are most favorable for the proposed use, with the same temporal period in all cases. The results indicate that the annual production of H{sub 2} must increase in order to satisfy the growing energy needs of the rural study population. The total annual costs of the HHES decreased during the study period, primarily due to a decrease in the costs of the final use component, which indicates the behavior of total costs. A comparison of the results obtained with those from the literature demonstrate interest in the proposed system given the ideal economic and environmental conditions provided to the zone selected, primarily due to the availability of inexpensive hydroelectric energy in the country. The current feasibility of the development of the HHES is shown, as compared to the option of supplying electric energy to rural population centers via traditional electric installations. [Spanish] Se estudia la viabilidad del desarrollo en Venezuela del Sistema Energetico Hidroelectricidad/Hidrogeno, SEHH, con vista a su aplicacion en sectores rurales del pais que no disponen de servicios permanentes y seguros de energia. El estudio se realiza mediante la elaboracion y posterior simulacion de un modelo matematico para cada uno de los componentes del sistema energetico: transformacion, almacenamiento

  13. Hydrogen Energy Storage: Grid and Transportation Services (Technical Report)

    Energy Technology Data Exchange (ETDEWEB)

    Melaina, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eichman, J. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-02-01

    Proceedings of an expert workshop convened by the U.S. Department of Energy and Industry Canada, and hosted by the National Renewable Energy Laboratory and the California Air Resources Board, May 14-15, 2014, in Sacramento, California, to address the topic of hydrogen energy storage (HES). HES systems provide multiple opportunities to increase the resilience and improve the economics of energy sup supply systems underlying the electric grid, gas pipeline systems, and transportation fuels. This is especially the case when considering particular social goals and market drivers, such as reducing carbon emissions, increasing reliability of supply, and reducing consumption of conventional petroleum fuels. This report compiles feedback collected during the workshop, which focused on policy and regulatory issues related to HES systems. Report sections include an introduction to HES pathways, market demand, and the "smart gas" concept; an overview of the workshop structure; and summary results from panel presentations and breakout groups.

  14. Annual meeting on nuclear technology '96. Technical session: Energy costs

    International Nuclear Information System (INIS)

    1996-08-01

    The two papers of this session deal with the costs of two different energy generation systems, one is based on photovoltaic energy conversion, and the other is the nuclear fuel cycle and nuclear energy generation. The author shows that the costs of these two energy systems in Germany are much more governed by decisions taken in the political domain than is the case in other countries. Although German science and technology in these two engineering fields hold a top rank worldwide, the high costs that seem inevitable in Germany are expected to be a major reason why the photovoltaic industry will have to leave the country and go abroad to exploit the better chances there. (DG) [de

  15. Modern Topics in Energy and Power Technical Meeting

    Science.gov (United States)

    2016-09-01

    of the meeting started with 2 talks on plasma and nuclear physics in a session chaired by Mr Morris Berman (ARL). In the first talk, “Energy and...and Nuclear Physics, Chair: Mr. Morris Berman 8:30 Energy and Pulsed Power for National Security Applications: A Naval Perspective Dr. Thomas...merit of the ideas expressed. Tuesday , 14 July, 9:00 Photoelectrochemical Water Splitting, from Fundamentals to Devices John A. Turner

  16. Wind energy: A review of technical and market issues

    Energy Technology Data Exchange (ETDEWEB)

    Garrad, A.D. [Garrad Hassan & Partners Ltd., Bristol (United Kingdom)

    1996-12-31

    Opinions on the world market for wind power are presented in this paper. The paper is divided into three sections: the market, the technology, and general conclusions. The market section compares European and US wind energy growth and contributing factors and barriers to growth. A technology overview discusses wind turbine concepts, mass reduction, blade structural flexibility, and growth in machine size. Political decisions, economic aspects, public acceptance, and technology limitations are assessed for their influence on the growth of wind energy. 11 figs.

  17. Technical Training: ELEC-2005 - Electronics in High Energy Physics

    CERN Multimedia

    Monique Duval

    2005-01-01

    Learning for the LHC! ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the successful ELEC-2002 course series. This comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms that will run throughout the year: Winter Term: Introduction to electronics in HEP (January-February, 6 lectures) Spring Term: Integrated circuits and VLSI technology for physics (March, 6 lectures) Summer Term: System electronics for physics: Issues (May, 7 lectures) Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) Lectures within each Term will take place on Tuesdays an...

  18. Technical Requirements For Reactors To Be Deployed Internationally For the Global Nuclear Energy Partnership

    International Nuclear Information System (INIS)

    Ingersoll, Daniel T.

    2007-01-01

    The Global Nuclear Energy Partnership (GNEP) seeks to create an international regime to support large-scale growth in the worldwide use of nuclear energy. Fully meeting the GNEP vision may require the deployment of thousands of reactors in scores of countries, many of which do not use nuclear energy currently. Some of these needs will be met by large-scale Generation III and III+ reactors (>1000 MWe) and Generation IV reactors when they are available. However, because many developing countries have small and immature electricity grids, the currently available Generation III(+) reactors may be unsuitable since they are too large, too expensive, and too complex. Therefore, GNEP envisions new types of reactors that must be developed for international deployment that are 'right sized' for the developing countries and that are based on technologies, designs, and policies focused on reducing proliferation risk. The first step in developing such systems is the generation of technical requirements that will ensure that the systems meet both the GNEP policy goals and the power needs of the recipient countries. Reactor systems deployed internationally within the GNEP context must meet a number of requirements similar to the safety, reliability, economics, and proliferation goals established for the DOE Generation IV program. Because of the emphasis on deployment to nonnuclear developing countries, the requirements will be weighted differently than with Generation IV, especially regarding safety and non-proliferation goals. Also, the reactors should be sized for market conditions in developing countries where energy demand per capita, institutional maturity and industrial infrastructure vary considerably, and must utilize fuel that is compatible with the fuel recycle technologies being developed by GNEP. Arrangements are already underway to establish Working Groups jointly with Japan and Russia to develop requirements for reactor systems. Additional bilateral and multilateral

  19. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  20. Solar Energy Development PEIS Information Center

    Science.gov (United States)

    skip navigation Solar Energy Development Programmatic EIS Home About the EIS Public Involvement Solar Energy Solar Energy Zones Maps Documents secondary menu News Frequently Asked Questions Glossary E the Programmatic Environmental Impact Statement for Solar Energy Development in Six Southwestern

  1. Magnetic fusion energy plasma interactive and high heat flux components. Volume II. Technical assessment of the critical issues and problem areas in high heat flux materials and component development

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.A.; Boyd, R.D.; Easor, J.R.; Gauster, W.B.; Gordon, J.D.; Mattas, R.F.; Morgan, G.D.; Ulrickson, M.A,; Watson, R.D.; Wolfer, W.G,

    1984-06-01

    A technical assessment of the critical issues and problem areas for high heat flux materials and components (HHFMC) in magnetic fusion devices shows these problems to be of critical importance for the successful operation of near-term fusion experiments and for the feasibility and attractiveness of long-term fusion reactors. A number of subgroups were formed to assess the critical HHFMC issues along the following major lines: (1) source conditions, (2) systems integration, (3) materials and processes, (4) thermal hydraulics, (5) thermomechanical response, (6) electromagnetic response, (7) instrumentation and control, and (8) test facilities. The details of the technical assessment are presented in eight chapters. The primary technical issues and needs for each area are highlighted.

  2. Magnetic fusion energy plasma interactive and high heat flux components. Volume II. Technical assessment of the critical issues and problem areas in high heat flux materials and component development

    International Nuclear Information System (INIS)

    Abdou, M.A.; Boyd, R.D.; Easor, J.R.

    1984-06-01

    A technical assessment of the critical issues and problem areas for high heat flux materials and components (HHFMC) in magnetic fusion devices shows these problems to be of critical importance for the successful operation of near-term fusion experiments and for the feasibility and attractiveness of long-term fusion reactors. A number of subgroups were formed to assess the critical HHFMC issues along the following major lines: (1) source conditions, (2) systems integration, (3) materials and processes, (4) thermal hydraulics, (5) thermomechanical response, (6) electromagnetic response, (7) instrumentation and control, and (8) test facilities. The details of the technical assessment are presented in eight chapters. The primary technical issues and needs for each area are highlighted

  3. The fluctuations of China’s energy intensity: Biased technical change

    International Nuclear Information System (INIS)

    Wang, Ce; Liao, Hua; Pan, Su-Yan; Zhao, Lu-Tao; Wei, Yi-Ming

    2014-01-01

    Highlights: • Biased technical change is considered in the adjusting the input–output tables. • The level of biased technical change is determined by TFP and energy efficiency. • The increase in energy intensity was mostly attributed to the structural change. • The changes in the production technology actually decreased the energy intensity. • The decomposition results are sensitive to the level of biased technical change. - Abstract: The fluctuations of China’s energy intensity have attracted the attention of many scholars, but fewer studies consider the data quality of official input–output tables. This paper conducts a decomposition model by using the Divisia method based on the input–output tables. Because of the problems with input–output tables and price deflators, we first produce constant prices to deflate the input–output tables. And then we consider different levels of biased technical change for different sectors in the adjusting the input–output table. Finally, we use RAS technique to adjust input–output matrix. Then the decomposition model is employed to empirically analyze the change of China’s energy intensity. We compare the decomposition results with and without biased technical change and do sensitive analysis on the level of biased technical change. The decomposition results are that during 2002–2007, the energy intensity of coal and electricity increased, the changes were mostly attributed to the structural change and the contribution was 594.08%, 73.88%, respectively; as for crude oil and refined oil, the energy intensity decreased, the changes were mostly attributed to the changes in the production technology and the contribution was 978.89%, 246.95%, respectively. And the results of sensitive analysis shows that 1% variation of the level of biased technical change will cause at most 0.6% change of decomposition results. Therefore, we can draw our conclusions: compared to the decomposition without biased technical

  4. 75 FR 54063 - Demand Response Compensation in Organized Wholesale Energy Markets; Technical Conference

    Science.gov (United States)

    2010-09-03

    ... FEDERAL ENERGY REGULATORY COMMISSION 18 CFR Part 35 [Docket No. RM10-17-000] Demand Response... for determining when to compensate demand response providers and the allocation of costs associated with demand response. DATES: The technical conference will be held at the Federal Energy Regulatory...

  5. Technical feasibility study for a solar energy system at Amsterdam Airport Schiphol (AAS)

    NARCIS (Netherlands)

    Janssen, P.N.J.W.; Myrzik, J.M.A.; Kling, W.L.; Reinders, L.

    2010-01-01

    This work arises within the framework of the introduction of renewable energies at Amsterdam Airport Schiphol (AAS) and the focus is on the technical feasibility of a solar energy system (SES) on ground level. The flight safety must always be guaranteed if solar panels are implemented on AAS. The

  6. Discussion to the effects and development of nuclear geological scientific and technical information

    International Nuclear Information System (INIS)

    Zhang Shucheng

    2010-01-01

    Nuclear geological scientific and technical information has played an important role in the national economic construction and energy development, as well as exploration of uranium geology. With the increasing difficulty of prospecting, both scientific research or geological prospecting work are increasingly dependent on scientific and technical information, so, nuclear geological research and services in the scientific and technical information have become an increasing concern. From effect of the information and information resources in scientific research, the article discusses the synthesis research and services in the nuclear geological scientific and technical information, and play the role of uranium geological prospecting in the period of 'Tenth Five-Year'. In the period of the 'Eleventh Five-Year' and the coming period, the authors proposes a conception that how to strengthen the digital construction of nuclear geology scientific literature, integrative information resources and development and utilization in the network environment; and outlooks a developing prospects, that is, how to more effectively apply modern information technology, so that provides a guarantee of information resources for the scientific research and production in the new round of exploration of uranium resources. (author)

  7. Sustainable Energy in Remote Indonesian Grids. Accelerating Project Development

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, Brian [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burman, Kari [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Davidson, Carolyn [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Elchinger, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hardison, R. [Winrock International, Little Rock, AR (United States); Karsiwulan, D. [Winrock International, Little Rock, AR (United States); Castermans, B. [Winrock International, Little Rock, AR (United States)

    2015-06-30

    Sustainable Energy for Remote Indonesian Grids (SERIG) is a U.S. Department of Energy (DOE) funded initiative to support Indonesia’s efforts to develop clean energy and increase access to electricity in remote locations throughout the country. With DOE support, the SERIG implementation team consists of the National Renewable Energy Laboratory (NREL) and Winrock International’s Jakarta, Indonesia office. Through technical assistance that includes techno-economic feasibility evaluation for selected projects, government-to-government coordination, infrastructure assessment, stakeholder outreach, and policy analysis, SERIG seeks to provide opportunities for individual project development and a collective framework for national replication office.

  8. Energy, environment and sustainable development

    International Nuclear Information System (INIS)

    Omer, Abdeen Mustafa

    2008-01-01

    level of building performance (BP), which can be defined as indoor environmental quality (IEQ), energy efficiency (EE) and cost efficiency (CE). circle Indoor environmental quality is the perceived condition of comfort that building occupants experience due to the physical and psychological conditions to which they are exposed by their surroundings. The main physical parameters affecting IEQ are air speed, temperature, relative humidity and quality. circle Energy efficiency is related to the provision of the desired environmental conditions while consuming the minimal quantity of energy. circle Cost efficiency is the financial expenditure on energy relative to the level of environmental comfort and productivity that the building occupants attained. The overall cost efficiency can be improved by improving the indoor environmental quality and the energy efficiency of a building. This article discusses the potential for such integrated systems in the stationary and portable power market in response to the critical need for a cleaner energy technology. Anticipated patterns of future energy use and consequent environmental impacts (acid precipitation, ozone depletion and the greenhouse effect or global warming) are comprehensively discussed in this paper. Throughout the theme several issues relating to renewable energies, environment and sustainable development are examined from both current and future perspectives. (author)

  9. Final Technical Report. Upgrades to Alabama Power Company Hydroelectric Developments

    Energy Technology Data Exchange (ETDEWEB)

    Crew, James F. [Southern Company Generation, Birmingham, AL (United States). Hydro Services; Johnson, Herbie N. [Southern Company Generation, Birmingham, AL (United States). Hydro Services

    2015-03-31

    From 2010 to 2014, Alabama Power Company (“Alabama Power”) performed upgrades on four units at three of the hydropower developments it operates in east-central Alabama under licenses issued by the Federal Energy Regulatory Commission (“FERC”). These three hydropower developments are located on the Coosa River in Coosa, Chilton, and Elmore counties in east-central Alabama.

  10. Nuclear design and technical development required for ISER plant

    International Nuclear Information System (INIS)

    Yokoyama, Takashi; Yamano, Naoki.

    1987-01-01

    The report outlines some results of a study carried out by the ISER (intrinsically safe and economical reactor) Investigation Group. In particular, nuclear design concepts are examined in relation to the fuel cycle. Discussion is also made on technical development efforts to be made for realizing an ISER. Calculation of some basic nuclear design parameters is performed and results are used to examine the reactor core and fuel for ISER. As a result, it is indicated that a high-burnup type reactor core should be used on a 4.5-batch replacement, 15 EFPM (effective full power month) scheme to optimize an ISER. For technical development, consideration is made on various tests to be performed with an experimental reactor, called ISER-E, as well as other tests to provide basic data required for demonstrating the inherent safety of ISER. The study also deals with the possibility of the application of currently available light water reactor techniques to experiments with a critical assembly, non-nuclear test loop, and the experimental reactor ISER-E. It is revealed that many of the required experiments can be carried out by using test facilities and light water reactor techniques which are currently, or will be readily, available. It is stressed that international cooperation is necessary to accomplish these tests. (Nogami, K.)

  11. [Theoretical studies in high energy physics]: Final technical report

    International Nuclear Information System (INIS)

    Braaten, E.

    1988-01-01

    The research activities that were supported by this grant were focused primarily on low energy quantum chromodynamics. Significant progress was made in the Skyrme model for baryons, string models for color flux tubes, hadronic decays of the /tau/ lepton, technicolor models of the electroweak interactions, and meson form factors in perturbative QCD

  12. Landfill Gas Energy Project Data and Landfill Technical Data

    Science.gov (United States)

    This page provides data from the LMOP Database for U.S. landfills and LFG energy projects in Excel files, a map of project and candidate landfill counts by state, project profiles for a select group of projects, and information about Project Expo sites.

  13. Independent technical reviews for groundwater and soil remediation projects at US Department Of Energy sites - 59188

    International Nuclear Information System (INIS)

    Kaback, Dawn S.; Chamberlain, Grover; Morse, John G.; Petersen, Scott W.

    2012-01-01

    The US Department of Energy Office of Environmental Management has supported independent technical reviews of soil and groundwater projects at multiple DOE sites over the last 10 years. These reviews have resulted in significant design improvements to remedial plans that have accelerated cleanup and site closure. Many have also resulted in improved understanding of complex subsurface conditions, promoting better approaches to design and implementation of new technologies. Independent technical reviews add value, because they provide another perspective to problem solving and act as a check for especially challenging problems. By bringing in a team of independent experts with a broad experience base, alternative solutions are recommended for consideration and evaluation. In addition, the independence of the panel is significant, because it is able to address politically sensitive issues. The expert panel members typically bring lessons learned from other sites to help solve the DOE problems. In addition, their recommendations at a particular site can often be applied at other sites, making the review even more valuable. The review process can vary, but some common lessons ensure a successful review: - Use a multi-disciplinary broadly experienced team; - Engage the panel early and throughout the project; - Involve regulators and stakeholders in the workshop, if appropriate. - Provide sufficient background information; - Close the workshop with a debriefing followed by a written report. Many groundwater remediation challenges remain at DOE sites. Independent technical reviews have and will ensure that the best capabilities and experience are applied to reduce risks and uncertainties. Even though the groundwater remediation industry has developed significantly over the last twenty years, advancements are needed to address the complexities of the subsurface at the DOE sites. These advancements have tremendous potential to save millions of dollars and to accelerate the

  14. Development of generation IV nuclear energy systems

    International Nuclear Information System (INIS)

    Matsui, Kazuaki; Oka, Yoshiaki; Ogawa, Masuro; Ichimiya, Masakazu; Noda, Hiroshi

    2003-01-01

    The fifth 'Generation IV International Forum (GIF), Policy Group Meetings' was held at the Zen-Nikku Hotel in Tokyo, on September 19-20, 2002, under participations of Abraham, Secretary of DOE in U.S.A., Columbani, Secretary of CEA in France, Fujiie, Chairman of CAE in Japan, Kano, Parliamental Minister of MIS in Japan, and so on. Ten nations entering GIF (Argentina, Brazil, Canada, France, Japan, Korea, South Africa, Switzerland, U.K., and U.S.A.) selected six next generation nuclear energy concepts for objects of international cooperative research and development aiming at its practice by 2030. These concepts applicable to not only power generation, but also hydrogen production, sea water purification, and so on, are sodium liquid metal cooled reactor (Japan), high temperature gas cooled reactor (France), Super-critical pressure water cooled reactor (SCWR: Canada), Lead metal cooled reactor (Switzerland), Gas cooled fast reactor (U.S.A.), and molten salts reactor. On the generation IV nuclear reactor systems aiming to further upgrade their sustainability, safety, economical efficiency, and nuclear non proliferation, the 'Plans on Technical Development' (Road-map) to decide priority of their R and Ds has been cooperatively discussed under frameworks of international research cooperation by the GIF members nations. Here were shared descriptions on nuclear fuel cycle as a remise of technical evaluation and adopted concepts by Japanese participants contributing to making up the Road-map. (G.K.)

  15. Geothermal Energy and the Eastern US: Fifth technical information interchange meeting, Minutes

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-12-01

    The technical interchange meeting documented here is the fifth meeting where people interested in geothermal energy in the Eastern US have met to interchange technical information. These meetings are intended to assist all in the difficult task of balancing time and effort in doing their assigned jobs and keeping track of what others are doing in similar or related tasks. All of the aforementioned meetings have served their intended purpose and further regional and national meetings are sure to follow.

  16. Geothermal Energy and the Eastern US: Technical Information Interchange Meeting, Minutes

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-12-01

    The technical interchange meeting documented here is the fourth meeting where people interested in geothermal energy in the Eastern US have met to interchange technical information. These meetings are intended to assist all in the difficult task of balancing time and effort in doing their assigned jobs and keeping track of what others are doing in similar or related tasks. All of the aforementioned meetings have served their intended purpose and further regional and national meetings are sure to follow.

  17. Technical reference book for the Energy Economic Data Base Program: EEDB Phase 9 (1987)

    International Nuclear Information System (INIS)

    1988-07-01

    This document provides the current technical design bases for each technical data model (of and electric generating plant) in the eighth update. It contains a set of detailed system design descriptions (supplemented with engineering drawings) for the technical data models. This distribution is the latest in a series published since 1978. The overall program purpose is to provide periodically updated, detailed base construction cost estimates for large nuclear electric operating plants. These data, which are representative of current US powerplant construction cost experience, are a useful contribution to program planning by the Office of the Assistant Secretary for Nuclear Energy

  18. FOREN 2004. Sustainable Energy Development and European Integration

    International Nuclear Information System (INIS)

    Iancu Iulian

    2004-01-01

    The 7th Regional Energy Forum- FOREN 2004 with the main topic 'Sustainable Energy Development and European Integration' took place in Neptun-Olimp, on 13th to 17th June 2004. The event was organized by WEC Romanian National Committee, under the auspices of the World Energy Council (WEC). The event was accompanied by several related manifestation as: An up to date Technical Programme designed to explore key issues concerning the ability of the Romanian energy industry to integrate in the European Union; An Exhibition providing first hand access to service and equipment providers; A Partnership Programme, to present the achievements and developments of power companies in round tables, film projections, technical visits and advertising; Social events giving to participants the opportunity to establish direct connections with the Romanian colleagues. The Forum was open to members of the World Energy Council, energy industry leaders, government ministers and officials, heads of international organizations like: UNECE, EC, IEA, Eurelectric, IGU, EUROgas, USAID, academics, media, individual and corporate members interested in sustainable energy development. For further details concerning the agenda and registration. Forum 2004 was structured on five sections each containing a key issue a panel session, communication session and poster presentation on the following items: 1. Energy legislation and institutional framework; 2. The technological dimension of sustainable energy; 3. The ecological dimension of sustainable development; 4. The social dimension of sustainable development; 5. The power equipment manufacturing industry

  19. Nuclear power as a high-order innovation and its role in scientific and technical development

    Energy Technology Data Exchange (ETDEWEB)

    Trnka, J [Ceskoslovenska Komise pro Atomovou Energii, Prague

    1979-04-01

    The systems approach to technical innovation, the developmental trends of the knowledge of inanimate nature and their technical applications in social production are described. The system of technical innovation orders is based on the definitions of the whole range of technical innovation, classified into several orders. Nine technical innovation orders are described. The concept defines the approach to defining the overall position of nuclear power and some of its development changes.

  20. Nuclear power as a high-order innovation and its role in scientific and technical development

    International Nuclear Information System (INIS)

    Trnka, J.

    1979-01-01

    The systems approach to technical innovation, the developmental trends of the knowledge of inanimate nature and their technical applications in social production are described. The system of technical innovation orders is based on the definitions of the whole range of technical innovation, classified into several orders of which. Nine technical innovation orders are described. The concept defines the approach to defining the overall position of nuclear power and some of its development changes. (J.P.)

  1. Developing non-technical ward-round skills.

    Science.gov (United States)

    Harvey, Rachel; Mellanby, Edward; Dearden, Effie; Medjoub, Karima; Edgar, Simon

    2015-10-01

    Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform. There is evidence that newly qualified doctors are not adequately prepared by their undergraduate experiences for this task. The aim of this study was to analyse the challenges pertaining to non-technical skills that students would face during ward rounds, and to create a model that facilitates the transition from medical student to doctor. A total of 217 final-year medical students completed a simulated ward round. Free-text responses were analysed using template analysis applying an a priori template developed from the literature by the research team. This drew on the generic categories of non-technical skills suggested by Flin et al. Ninety-seven per cent of students agreed or strongly agreed that the simulated ward round improved their insight into the challenges of ward rounds and their perceived ability to work efficiently as an active member of the ward round. The responding students (206) submitted written feedback describing the learning that they planned to use: 800 learning points were recorded, and all could be categorised into one of seven non-technical skills. Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform We believe that improved task efficiency and insight into the challenges of the ward round gained by medical students will lead to an enhancement in performance during clinical rounds, and will have a positive impact on patient safety. We would suggest that undergraduate medical schools consider this model in the preparation for the clinical practice element of the curriculum. © 2015 John Wiley & Sons Ltd.

  2. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2010

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2011-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Other activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2010. (Author)

  3. Energy materials coordinating committee (EMaCC). Annual technical report, fiscal year 2003

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-10-18

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. Topical subcommittees of the EMaCC are responsible for conducting seminars and otherwise facilitating information flow between DOE organizational units in materials areas of particular importance to the Department. The EMaCC Terms of Reference were recently modified and developed into a Charter that was approved on June 5, 2003. As a result of this reorganization, the existing subcommittees were disbanded and new subcommittees are being formed.

  4. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2009

    International Nuclear Information System (INIS)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M.

    2010-04-01

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2009. (Author)

  5. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2009

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S B; Michelsen, P K; Rasmussen, J J; Westergaard, C M [eds.

    2010-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2009. (Author)

  6. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2008

    Energy Technology Data Exchange (ETDEWEB)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M. (eds.)

    2009-04-15

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. New activities in technology related to development of high temperature superconductors have been initiated in 2008. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2008. (Author)

  7. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2008

    International Nuclear Information System (INIS)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M.

    2009-04-01

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. New activities in technology related to development of high temperature superconductors have been initiated in 2008. Minor activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2008. (Author)

  8. Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark. Annual progress report 2010

    International Nuclear Information System (INIS)

    Korsholm, S.B.; Michelsen, P.K.; Rasmussen, J.J.; Westergaard, C.M.

    2011-04-01

    The programme of the Research Unit of the Fusion Association Euratom - Risoe National Laboratory for Sustainable Energy, Technical University of Denmark, covers work in fusion plasma physics and in fusion technology. The fusion plasma physics research focuses on turbulence and transport, and its interaction with the plasma equilibrium and particles. The effort includes both first principles based modelling, and experimental observations of turbulence and of fast ion dynamics by collective Thomson scattering. Within fusion technology there are activities related to development of high temperature superconductors. Other activities are system analysis, initiative to involve Danish industry in ITER contracts and public information. A summary is presented of the results obtained in the Research Unit during 2010. (Author)

  9. Technical and economic assessment of tethered wind energy systems

    Energy Technology Data Exchange (ETDEWEB)

    Furuya, O.; Maekawa, S.

    1984-08-01

    The wind energy existing at high altitude has been investigated as a potential energy resource in the United States. In terms of the average power density, it can be as high as 16 KW/m/sup 2/ at northeastern U.S. sites such as New York, which can be compared to 0.5 KW/m/sup 2/, the maximum ground level value at the U.S. sites. For a lifting generation device, a VTOL concept, new to this type of TWES, which combines the fixed wing with helicopter technology was extensively studied. The cost of electricity (COE) with such a system was determined and found to be competitive to that of fossil fuel in the near future.

  10. Technical characteristics of the TRISPAL system high-energy end

    International Nuclear Information System (INIS)

    Meot, F.

    1996-04-01

    This document presents an overview of the principle design of the high-energy end of the TRISPAL high-intensity LINAC system, with detailed schemes of the different constituent parts and of the beam envelopes. This schemes are presented with the geometric and magnetic parameters of the optical elements. The aim of this document is to allow the cost evaluation of the complete system. (J.S.). 5 refs., 5 figs., 5 tabs., 1 append

  11. Review of TSOs technical needs in safety research and development

    International Nuclear Information System (INIS)

    Rintamaa, R.; Bruna, G.

    2012-01-01

    ETSON is the network of European Technical Safety Organizations. The ETSON members have elaborated together a position paper which identifies and ranks the main research and development fields of endeavor in a short, mid and long term perspective. The main research areas and major needs are grouped in 7 areas: 1) safety assessment methods, 2) multi-physics safety approach (several disciplines, macroscopic and microscopic level), 3) Ageing of materials, 4) fuel behaviour, 5) human and organisational factors, 6) instrumentation and control, 7) Severe accidents: phenomenology and methodology, and severe accidents: crisis preparedness and major needs. ETSON has coordinated the activities with other European platforms and has widely contributed to the NUGENIA (Nuclear Generation 2 and 3 Association) topic research and development areas. The next step will be a prioritization of these needs

  12. SINERGIA laparoscopic virtual reality simulator: didactic design and technical development.

    Science.gov (United States)

    Lamata, Pablo; Gómez, Enrique J; Sánchez-Margallo, Francisco M; López, Oscar; Monserrat, Carlos; García, Verónica; Alberola, Carlos; Florido, Miguel Angel Rodríguez; Ruiz, Juan; Usón, Jesús

    2007-03-01

    VR laparoscopic simulators have demonstrated its validity in recent studies, and research should be directed towards a high training effectiveness and efficacy. In this direction, an insight into simulators' didactic design and technical development is provided, by describing the methodology followed in the building of the SINERGIA simulator. It departs from a clear analysis of training needs driven by a surgical training curriculum. Existing solutions and validation studies are an important reference for the definition of specifications, which are described with a suitable use of simulation technologies. Five new didactic exercises are proposed to train some of the basic laparoscopic skills. Simulator construction has required existing algorithms and the development of a particle-based biomechanical model, called PARSYS, and a collision handling solution based in a multi-point strategy. The resulting VR laparoscopic simulator includes new exercises and enhanced simulation technologies, and is finding a very good acceptance among surgeons.

  13. Development of renewable energies apart from biomass on farms

    International Nuclear Information System (INIS)

    Brule, K.; Pindard, A.; Jaujay, J.; Femenias, A.

    2009-01-01

    This paper proposes an overview and a prospective glance at the development of renewable energies in farms, apart those which are based on the production or use of biomass. Some indicators are defined (energy production and consumption). Stake holders are identified. Some retrospective major and emerging trends are discussed. The major trends are: growth and diversification of renewable energy production, calling to renewable energy production in farms. The emerging trends are: a recent increase of renewable energy production in farms apart from biomass, locally stressed land market, economic profitability of photovoltaic installations due to purchase tariffs. Some prospective issues are discussed: technical support, financial support, development of other energy sources, and tax policy on fossil energy used in agriculture. Three development hypotheses are discussed

  14. The industrial development of atomic energy

    International Nuclear Information System (INIS)

    Kowarski, L.

    1955-01-01

    Countries with large stock of fissile material and producing large quantity of nuclear pure 235 U and 239 Pu are able to allocate part of the stock to non military research. For countries with low stock of fissile material, all the stock is allocated to military research. An economical and technical solution has to be find to dedicate a part of fissile material to non military research and develop the atomic energy industry. It stated the industrial and economical problems and in particular the choice between the use of enriched fuel with high refining cost or depleted fuel with low production cost. It discusses of four possible utilizations of the natural resources: reactors functioning with pure fissile material ( 235 U or 239 Pu) or concentrated material ( 235 U mixed with small quantities of 238 U after an incomplete isotopic separation), breeder reactors functioning with enriched material mixed with 238 U or Thorium placed in an appropriate spatial distribution to allow neutrons beam to activate 238 U or Thorium with the regeneration of fissile material in 239 Pu, reactors using natural uranium or low enriched uranium can also produce Plutonium with less efficiency than breeder reactors and the last solution being the use of natural uranium with the only scope of energy production and no production of secondary fissile material. The first class using pure fissile material has a low energy efficiency and is used only by large fissile material stock countries to accumulate energy in small size fuel for nuclear engines researches for submarines and warships. The advantage of the second class of reactors, breeder reactors, is that they produce energy and plutonium. Two type of breeder reactor are considered: breeder reactor using pure fissile material and 238 U or breeder reactor using the promising mixture of pure fissile material and Thorium. Different projects are in phase of development in United States, England and Scotland. The third class of reactor using

  15. H2 at Scale: Benefitting our Future Energy System - Update for the Hydrogen Technical Advisory Committee

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, Mark

    2016-12-06

    Hydrogen is a flexible, clean energy carrying intermediate that enables aggressive market penetration of renewables while deeply decarbonizing our energy system. H2 at Scale is a concept that supports the electricity grid by utilizing energy without other demands at any given time and also supports transportation and industry by providing low-priced hydrogen to them. This presentation is an update to the Hydrogen Technical Advisory Committee (HTAC).

  16. Technical Barriers, Gaps, and Opportunities Related to Home Energy Upgrade Market Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, M. V. A.

    2011-11-01

    This report outlines the technical barriers, gaps, and opportunities that arise in executing home energy upgrade market delivery approaches, as identified through research conducted by the U.S. Department of Energy's Building America program. The objective of this report is to outline the technical1 barriers, gaps, and opportunities that arise in executing home energy upgrade market delivery approaches, as identified through research conducted by the U.S. Department of Energy's (DOE) Building America program. This information will be used to provide guidance for new research necessary to enable the success of the approaches. Investigation for this report was conducted via publications related to home energy upgrade market delivery approaches, and a series of interviews with subject matter experts (contractors, consultants, program managers, manufacturers, trade organization representatives, and real estate agents). These experts specified technical barriers and gaps, and offered suggestions for how the technical community might address them. The potential benefits of home energy upgrades are many and varied: reduced energy use and costs; improved comfort, durability, and safety; increased property value; and job creation. Nevertheless, home energy upgrades do not comprise a large part of the overall home improvement market. Residential energy efficiency is the most complex climate intervention option to deliver because the market failures are many and transaction costs are high (Climate Change Capital 2009). The key reasons that energy efficiency investment is not being delivered are: (1) The opportunity is highly fragmented; and (2) The energy efficiency assets are nonstatus, low-visibility investments that are not properly valued. There are significant barriers to mobilizing the investment in home energy upgrades, including the 'hassle factor' (the time and effort required to identify and secure improvement works), access to financing, and the

  17. Technical Analysis of the Hydrogen Energy Station Concept, Phase I and Phase II

    Energy Technology Data Exchange (ETDEWEB)

    TIAX, LLC

    2005-05-04

    patterns would be most viable for an energy station, TIAX developed several criteria for selecting a representative set of technology configurations. TIAX applied these criteria to all possible technology configurations to determine an optimized set for further analysis, as shown in Table ES-1. This analysis also considered potential energy station operational scenarios and their impact upon hydrogen and power production. For example, an energy station with a 50-kWe reformer could generate enough hydrogen to serve up to 12 vehicles/day (at 5 kg/fill) or generate up to 1,200 kWh/day, as shown in Figure ES-1. Buildings that would be well suited for an energy station would utilize both the thermal and electrical output of the station. Optimizing the generation and utilization of thermal energy, hydrogen, and electricity requires a detailed look at the energy transfer within the energy station and the transfer between the station and nearby facilities. TIAX selected the Baseline configuration given in Table ES-1 for an initial analysis of the energy and mass transfer expected from an operating energy station. Phase II The purpose of this technical analysis was to analyze the development of a hydrogen-dispensing infrastructure for transportation applications through the installation of a 50-75 kW stationary fuel cell-based energy station at federal building sites. The various scenarios, costs, designs and impacts of such a station were quantified for a hypothetical cost-shared program that utilizes a natural gas reformer to provide hydrogen fuel for both the stack(s) and a limited number of fuel cell powered vehicles, with the possibility of using cogeneration to support the building heat load.

  18. Recovery Act: Energy Efficiency of Data Networks through Rate Adaptation (EEDNRA) - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Andrews; Spyridon Antonakopoulos; Steve Fortune; Andrea Francini; Lisa Zhang

    2011-07-12

    This Concept Definition Study focused on developing a scientific understanding of methods to reduce energy consumption in data networks using rate adaptation. Rate adaptation is a collection of techniques that reduce energy consumption when traffic is light, and only require full energy when traffic is at full provisioned capacity. Rate adaptation is a very promising technique for saving energy: modern data networks are typically operated at average rates well below capacity, but network equipment has not yet been designed to incorporate rate adaptation. The Study concerns packet-switching equipment, routers and switches; such equipment forms the backbone of the modern Internet. The focus of the study is on algorithms and protocols that can be implemented in software or firmware to exploit hardware power-control mechanisms. Hardware power-control mechanisms are widely used in the computer industry, and are beginning to be available for networking equipment as well. Network equipment has different performance requirements than computer equipment because of the very fast rate of packet arrival; hence novel power-control algorithms are required for networking. This study resulted in five published papers, one internal report, and two patent applications, documented below. The specific technical accomplishments are the following: • A model for the power consumption of switching equipment used in service-provider telecommunication networks as a function of operating state, and measured power-consumption values for typical current equipment. • An algorithm for use in a router that adapts packet processing rate and hence power consumption to traffic load while maintaining performance guarantees on delay and throughput. • An algorithm that performs network-wide traffic routing with the objective of minimizing energy consumption, assuming that routers have less-than-ideal rate adaptivity. • An estimate of the potential energy savings in service-provider networks

  19. Developing solar energy in France

    International Nuclear Information System (INIS)

    Alary-Grall, L.

    2003-01-01

    3 years ago the 'Soleil' program was launched and today 660.000 m 2 of solar cells have been installed which has made France to rank 4 behind Germany, Greece and Austria in terms of the use of solar energy. The 'Soleil' program, that will end in 2006, aims at developing solar energy in France and is composed of 4 axis: 1) the contribution to the funding of solar equipment through enticing financial helps, 2) the implementation of a quality plan for the installers of solar equipment, 3) the setting of a quality label for innovative and efficient solar equipment and 4) the promoting of solar energy to the professionals of the construction sector. (A.C.)

  20. [Medium energy physics at Syracuse University: Technical progress report

    International Nuclear Information System (INIS)

    Souder, P.A.

    1986-01-01

    The primary focus of research has been an experiment at the MIT-Bates Linear Accelerator Center to measure the spin-dependence of elastic scattering of electrons from carbon. The Syracuse University Medium Energy Physics Group is also part of a collaboration which will measure the tensor polarization of deuterons scattered by electrons. Finally, analysis has been completed for an experiment at LAMPF in which the first observation of the exotic ion μ + e - e - was made. 17 refs., 18 figs., 2 tabs

  1. FY2011 Progress Report for Energy Storage Research & Development

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-01-31

    The FY 2011 Progress Report for Energy Storage R&D focuses on advancing the development of batteries to enable a large market penetration of hybrid and electric vehicles. Program targets focus on overcoming technical barriers to enable market success including: (1) significantly reducing battery cost, (2) increasing battery performance (power, energy, durability), (3) reducing battery weight & volume, and (4) increasing battery tolerance to abusive conditions such as short circuit, overcharge, and crush.

  2. The status and role of nuclear energy in the sustainable energy development strategy in China

    International Nuclear Information System (INIS)

    Pan Ziqiang; Wang Yongping; Zhao Shoufeng; Zheng Yuhui

    2005-01-01

    The status and role of nuclear energy in the sustainable energy development strategy in China are discussed in this research report. Specifically, the role of nuclear energy in meeting the requirements of energy and electricity supply, environment protection and greenhouse gas (GHG) emission-reduction is focused on. The report is mainly composed of three component parts. The serious situation and challenges concerning the national energy security and energy sustainable development, and major tasks proposed to carry out the strategy of energy sustainable development are expounded in the first part. In the second part, the position and role of nuclear energy in China are elaborated and analyzed in detail. Firstly, it is indicated that the development of nuclear energy is the objective requirement for optimizing national energy structure. From the viewpoint of climate and environment protection, energy mix is required to transit from conventional fossil fuels to clean and high-quality energy sources. The potential role of nuclear energy in energy structure optimization in China is compared with that of hydro and other renewable energy sources. Secondly, it is proposed that the development of nuclear energy is the important security option for safely supplying the national energy and electricity in the future, mainly from the point of nuclear power providing stable and reliable power supply, relieving the burden of coal exploitation and transportation and reducing the risk of energy security caused by dependence on oil and natural gas. Thirdly, it is elaborated that the development of nuclear energy is the inevitable selection for carrying out the national energy and electricity sustainable development. It is given further details that nuclear energy is a clean and economical energy option, a preference coinciding with the principles of the circular economy, a feasible technical choice to greatly reduce emission of greenhouse gases, a selection contributing to

  3. Proceedings of the 8. Brazilian congress on energy: energy policy, regulation and sustainable development. v. 3: technological innovation, renewable sources and rural energization

    International Nuclear Information System (INIS)

    1999-01-01

    These proceedings cover the papers presented in the 8. Brazilian congress on energy held at Rio de Janeiro from November, 30 to December, 02, 1999, focusing energy policy, regulation and sustainable development, specifically the contribution of energy to a satisfactory quality of life for everyone. Within such a context, the congress technical programme has been structured around six different divisions: energy, environment and development; energy sector regulation; energy policy and planning; technology innovation; energy conservation; renewable energy sources and rural areas energy supply

  4. Iran and regional energy development

    International Nuclear Information System (INIS)

    1998-01-01

    Topics reviewed in these conference proceedings in the first session include domestic imperatives covering the economy, social imperatives - civil society and the rule of law, and the overall investment climate. Session 2 focuses on Iran and the energy sector with papers on oil and gas pipelines, and the effect of sanctions. Session 3 deals with Iran and the Persian Gulf with papers on new developments in Iran and its Arab neighbours, and Iran and Arab attempts to manage oil output. Session 4 concentrates on business and investment perspectives with papers on the low oil and gas prices and the new competition for investment capital, the investment climate, the building of connection with Iran, and identifying the predominant trends. A keynote address by the former deputy Foreign Minister of Iran examines regional energy development

  5. 76 FR 11414 - Defense Federal Acquisition Regulation Supplement; Independent Research and Development Technical...

    Science.gov (United States)

    2011-03-02

    ... Acquisition Regulation Supplement; Independent Research and Development Technical Descriptions (DFARS Case... (DFARS) to require contractors to report independent research and development (IR&D) projects generating... to the Defense Technical Information Center (DTIC). Beginning in the 1990s, DoD reduced its technical...

  6. The energy consumption of households - technical and social explanations of variations; Boligers energiforbrug - sociale og tekniske forklaringer pae forskelle

    Energy Technology Data Exchange (ETDEWEB)

    Gram-Hansen, K

    2003-07-01

    It is well known that the amount of energy consumed in different households varies greatly with respect to both heat and electricity. Previous research has focused on either technical or social explanations for this and the social explanations have focused on the big variations between social groups. In contrast to this, the aim of this project has been to explain differences in energy consumption between quite similar households and to seek social and technical explanations. Seven high-dense, low-rise neighbourhoods in the municipality of Albertslund have been investigated. The eco-account of the municipality shows large variations in the level of energy consumption both between households in the same neighbourhood and between the neighbourhoods. Noticeably larger heat consumption was found in neighbourhoods with rented apartments rather than with owner-occupied apartments. On this background the aim of this project has been: To explore technical and social explanations for large variations in energy consumption in similar neighbourhoods; To investigate connections between technical and social explanations; To point to relevant strategies concerning behaviour and lifestyle to reduce energy consumption. To answer these questions several investigations were carried out in the seven neighbourhoods including computer calculations of the buildings' heat loss, a survey among 500 residents, qualitative interviews with ten families and detailed measures of the indoor climate in thirty households. Based on the results the following strategies to reduce energy consumption are formulated: Emphasising positive aspect of a modest life to promote families with a saving attitude to stick to this in spite of societal pressure for increased consumption; Continuing information strategies towards a more environmentally sound behaviour, bur with greater emphasis on reducing consumption than on the attitude towards environment; Concerning new information technologies, technology

  7. The energy consumption of households - technical and social explanations of variations; Boligers energiforbrug - sociale og tekniske forklaringer pae forskelle

    Energy Technology Data Exchange (ETDEWEB)

    Gram-Hansen, K.

    2003-07-01

    It is well known that the amount of energy consumed in different households varies greatly with respect to both heat and electricity. Previous research has focused on either technical or social explanations for this and the social explanations have focused on the big variations between social groups. In contrast to this, the aim of this project has been to explain differences in energy consumption between quite similar households and to seek social and technical explanations. Seven high-dense, low-rise neighbourhoods in the municipality of Albertslund have been investigated. The eco-account of the municipality shows large variations in the level of energy consumption both between households in the same neighbourhood and between the neighbourhoods. Noticeably larger heat consumption was found in neighbourhoods with rented apartments rather than with owner-occupied apartments. On this background the aim of this project has been: To explore technical and social explanations for large variations in energy consumption in similar neighbourhoods; To investigate connections between technical and social explanations; To point to relevant strategies concerning behaviour and lifestyle to reduce energy consumption. To answer these questions several investigations were carried out in the seven neighbourhoods including computer calculations of the buildings' heat loss, a survey among 500 residents, qualitative interviews with ten families and detailed measures of the indoor climate in thirty households. Based on the results the following strategies to reduce energy consumption are formulated: Emphasising positive aspect of a modest life to promote families with a saving attitude to stick to this in spite of societal pressure for increased consumption; Continuing information strategies towards a more environmentally sound behaviour, bur with greater emphasis on reducing consumption than on the attitude towards environment; Concerning new information technologies, technology

  8. A New Stage in the Development of Secondary Vocational-Technical Schools

    Science.gov (United States)

    Sedakov, V.

    1977-01-01

    Recommends that projected growth in the technical-vocational sector of education in the Soviet Union be accompanied by qualitative improvements in areas of political socialization, cultural transmission, and technical development. (Author/DB)

  9. Technical Review Guidelines for Environmental Impact Assessments in the Tourism, Energy and Mining Sectors

    Science.gov (United States)

    EPA coordinated a regional collaborative process with Central America and Dominican Republic Free Trade Agreement (CAFTA-DR) partners to develop Environmental Impact Assessment (EIA) Technical Review Guidelines for three sectors.

  10. U.S. Department of Energy Program of International Technical Cooperation for Research Reactor Utilization

    International Nuclear Information System (INIS)

    Chong, D.; Manning, M.; Ellis, R.; Apt, K.; Flaim, S.; Sylvester, K.

    2004-01-01

    The U.S. Department of Energy, National Nuclear Security Administration (DOE/NNSA) has initiated collaborations with the national nuclear authorities of Egypt, Peru, and Romania for the purpose of advancing the commercial potential and utilization of their respective research reactors. Under its Office of International Safeguards ''Sister Laboratory'' program, DOE/NNSA has undertaken numerous technical collaborations over the past decade intended to promote peaceful applications of nuclear technology. Among these has been technical assistance in research reactor applications, such as neutron activation analysis, nuclear analysis, reactor physics, and medical radioisotope production. The current collaborations are intended to provide the subject countries with a methodology for greater commercialization of research reactor products and services. Our primary goal is the transfer of knowledge, both in administrative and technical issues, needed for the establishment of an effective business plan and utilization strategy for the continued operation of the countries' research reactors. Technical consultation, cooperation, and the information transfer provided are related to: identification, evaluation, and assessment of current research reactor capabilities for products and services; identification of opportunities for technical upgrades for new or expanded products and services; advice and consultation on research reactor upgrades and technical modifications; characterization of markets for reactor products and services; identification of competition and estimation of potential for market penetration; integration of technical constraints; estimation of cash flow streams; and case studies

  11. Elementary particle physics and high energy phenomena. Final technical report

    International Nuclear Information System (INIS)

    Barker, A.R.; Cumalat, J.P.; Alwis, S.P. de; Degrand, T.A.; Ford, W.T.; Mahanthappa, K.T.; Nauenberg, U.; Rankin, P.; Smith, J.G.

    1996-06-01

    This report covers progress made by Experimental Group 1 (Task A1). Brief summaries are given for the research in each of the following areas: (1) study of the properties of the Z 0 with the SLD detector; (2) the KTeV project: studies of CP violation; (4) detector development activities; (5) the B-Factory program; and (6) the NLC program

  12. Fuel Cycle Research and Development. Technical Monthly - March 2012

    International Nuclear Information System (INIS)

    Miller, Michael C.

    2012-01-01

    Several MPACT BCPs were executed in February, reflecting the shift in MPACT priorities directed late last year. Work continued on the FY2014 IPL, also bringing it in line with the new priorities. Preparations were made for the March MPACT Working Group meeting, in conjunction with Savannah River which is hosting the meeting. Steps were taken to initiate a new project with the World Institute for Nuclear Security, including discussions with WINS staff and preliminary work on the required procurement documentation. Several hardware issues were worked through. The newest detector array is working at LANL. A thorough analysis of previously collected Pu sample data using recently developed analysis code with improved spectral energy calibrations was completed. We now have a significantly better understanding of measurement uncertainties. Post-test analyses of the salt and sensor material for the first sensor test are almost complete. Sensor testing with different arrangements will continue and will be oriented based on post-test analysis of the first sensor test. Sensor materials for the next couple of tests are being fabricated. Materials with different annealing temperatures are being prepared for analysis. Fast Neutron Imaging to Quantify Nuclear Materials - The imager detectors repairs are complete and work with the imager is under way. The milestone requiring a report on LANSCE experiments was completed and submitted. Analysis of previous experiments and comparisons to simulations is near complete. Results are being compared with previous LANSCE-LSDS and RPI results. Additional data library (TENDL) is also being checked to see whether there are differences in the simulation results. The mid-year MIP Monitor project accomplishments and progress was presented at the MPACT meeting held in March at SRNL. Discussions around the meeting included inquiries into the feasibility of collecting process measurement data at H-Canyon, and it was explored further after the

  13. Energy, emissions, and social consequences of telecommuting. Technical Report One

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    By reducing transportation use, telecommuting can help reduce some of the social costs of travel (traffic congestion, time lost, emissions, dependence on imported fuels, accident deaths and property damage). These positive direct effects will be both offset and supplemented by indirect effects of telecommuting: improved traffic flow, latent demand (people will start driving more), and increased urban sprawl. The study indicates that the energy and emissions benefits of telecommuting are not likely to be entirely offset by latent travel demand or by the geographical expansion of cities; perhaps half the potential reduction in vehicle-miles traveled will be replaced by new traffic. From a fuel-use perspective, the indirect benefit of lower average emissions and fuel consumption rates appears sufficient to offset impacts from the third indirect effect, additional travel brought about by increased suburbanization. Substantial levels of telecommuting will also reduce the need for highway capacity expansion, saving capital, maintenance, and urban land. Telecommuting and its benefits will be concentrated in the largest, most congested, and most polluted urban areas (20--25% in the NYC and LA areas; 50% in the 10 largest cities; 90% in the 75 largest).Telecommuting may also have a synergistic beneficial effect on other transportation strategies, e.g., congestion pricing, parking fees, taxes discouraging travel during peak periods, etc. Other beneficial effects may include greater presence of adults at home and on residential communities. Effects of improved telecommunications technology on transportation, freight, economy, industrial operations are discussed, including implications of an ``information superhighway.``

  14. The United Nations development programme initiative for sustainable energy

    Energy Technology Data Exchange (ETDEWEB)

    Hurry, S.

    1997-12-01

    Energy is central to current concerns about sustainable human development, affecting economic and social development; economic growth, the local, national, regional, and global environment; the global climate; a host of social concerns, including poverty, population, and health, the balance of payments, and the prospects for peace. Energy is not an end in itself, but rather the means to achieve the goals of sustainable human development. The energy systems of most developing countries are in serious crisis involving insufficient levels of energy services, environmental degradation, inequity, poor technical and financial performance, and capital scarcity. Approximately 2.5 billion people in the developing countries have little access to commercial energy supplies. Yet the global demand for energy continues to grow: total primary energy is projected to grow from 378 exajoules (EJ) per year in 1990 to 571 EJ in 2020, and 832 EJ in 2050. If this increase occurs using conventional approaches and energy sources, already serious local (e.g., indoor and urban air pollution), regional (eg., acidification and land degradation), and global (e.g., climate change) environmental problems will be critically aggravated. There is likely to be inadequate capital available for the needed investments in conventional energy sources. Current approaches to energy are thus not sustainable and will, in fact, make energy a barrier to socio-economic development. What is needed now is a new approach in which energy becomes an instrument for sustainable development. The two major components of a sustainable energy strategy are (1) more efficient energy use, especially at the point of end-use, and (2) increased use of renewable sources of energy. The UNDP Initiative for Sustainable Energy (UNISE) is designed to harness opportunities in these areas to build upon UNDP`s existing energy activities to help move the world toward a more sustainable energy strategy by helping program countries.

  15. Fatique Resistant, Energy Efficient Welding Program, Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Egland, Keith; Ludewig, Howard

    2006-05-25

    The program scope was to affect the heat input and the resultant weld bead geometry by synchronizing robotic weave cycles with desired pulsed waveform shapes to develop process parameters relationships and optimized pulsed gas metal arc welding processes for welding fatique-critical structures of steel, high strength steel, and aluminum. Quality would be addressed by developing intelligent methods of weld measurement that accurately predict weld bead geometry from process information. This program was severely underfunded, and eventually terminated. The scope was redirected to investigate tandem narrow groove welding of steel butt joints during the one year of partial funding. A torch was designed and configured to perform a design of experiments of steel butt weld joints that validated the feasability of the process. An initial cost model estimated a 60% cost savings over conventional groove welding by eliminating the joint preparation and reducing the weld volume needed.

  16. Mammography - recent technical developments and their clinical potential

    Energy Technology Data Exchange (ETDEWEB)

    Hemdal, Bengt; Mattsson, Soeren [Malmoe Univ. Hospital (Sweden). Dept. of Radiation Physics; Andersson, Ingvar [Malmoe Univ. Hospital (Sweden). Dept. of Diagnostic Radiology; Thilander Klang, Anne [Sahlgrenska Univ. Hospital, Goeteborg (Sweden). Dept. of Medical Physics and Biomedical Engineering; Bengtsson, Gert; Jarlman, O. [Lund Univ. Hospital (Sweden). Dept. of Diagnostic Radiology; Leitz, Wolfram [Swedish Radiation Protection Authority, Stockholm (Sweden); Bjurstam, Nils [Univ. of North Norway, Troms (Norway). Dept. of Radiology

    2002-05-01

    The recent technical developments in digital as well as screen-film X-ray mammography have been reviewed in order to evaluate their clinical potential and to analyse possible lines for future development. Material and methods: The scientific literature has been reviewed, conferences covered and contacts with colleagues developed. Companies in the field have been inquired and invited for presentations. Own experience has been gathered from different screen-film and digital mammography systems. Results and conclusions: Although there are important complementary techniques such as ultrasound and magnetic resonance imaging (MRI), X-ray mammography is still the golden standard for breast imaging. It is relatively simple and cost-effective, and it is presently the only realistic technique for screening in a large scale. It is still largely the only technique that can detect breast cancer in a pre invasive stage. Equipment for digital mammography is commercially available both with small area and full field technique (FFDM). The development of FFDM systems is now intense, as well as the development of dedicated workstations and computer-aided detection (CAD). In spite of this, the introduction of digital mammography has been very slow compared to most other X-ray examinations due to high costs and technical challenges to meet the high demands on image quality and dose in mammography as well as the demands on specialised workflow support for screening mammography and suitable display techniques. Film reading of digital mammograms has been the most common display mode so far, but to take full advantage of the digital concept, diagnostic as well as logistic, monitor reading must be applied. There is a potential of FFDM systems for significantly higher image quality or significantly lower dose than screen-film mammography (SFM), or both. Further research is necessary to fully use this potential. The investment costs are much higher for digital than screen-film mammography

  17. Mammography - recent technical developments and their clinical potential

    International Nuclear Information System (INIS)

    Hemdal, Bengt; Mattsson, Soeren; Bjurstam, Nils

    2002-05-01

    The recent technical developments in digital as well as screen-film X-ray mammography have been reviewed in order to evaluate their clinical potential and to analyse possible lines for future development. Material and methods: The scientific literature has been reviewed, conferences covered and contacts with colleagues developed. Companies in the field have been inquired and invited for presentations. Own experience has been gathered from different screen-film and digital mammography systems. Results and conclusions: Although there are important complementary techniques such as ultrasound and magnetic resonance imaging (MRI), X-ray mammography is still the golden standard for breast imaging. It is relatively simple and cost-effective, and it is presently the only realistic technique for screening in a large scale. It is still largely the only technique that can detect breast cancer in a pre invasive stage. Equipment for digital mammography is commercially available both with small area and full field technique (FFDM). The development of FFDM systems is now intense, as well as the development of dedicated workstations and computer-aided detection (CAD). In spite of this, the introduction of digital mammography has been very slow compared to most other X-ray examinations due to high costs and technical challenges to meet the high demands on image quality and dose in mammography as well as the demands on specialised workflow support for screening mammography and suitable display techniques. Film reading of digital mammograms has been the most common display mode so far, but to take full advantage of the digital concept, diagnostic as well as logistic, monitor reading must be applied. There is a potential of FFDM systems for significantly higher image quality or significantly lower dose than screen-film mammography (SFM), or both. Further research is necessary to fully use this potential. The investment costs are much higher for digital than screen-film mammography

  18. Final Technical Report for "High Energy Physics at The University of Iowa"

    Energy Technology Data Exchange (ETDEWEB)

    Mallik, Usha; Meurice, Yannick; Nachtman, Jane; Onel, Yasar; Reno, Mary

    2013-07-31

    Particle Physics explores the very fundamental building blocks of our universe: the nature of forces, of space and time. By exploring very energetic collisions of sub-nuclear particles with sophisticated detectors at the colliding beam accelerators (as well as others), experimental particle physicists have established the current theory known as the Standard Model (SM), one of the several theoretical postulates to explain our everyday world. It explains all phenomena known up to a very small fraction of a second after the Big Bang to a high precision; the Higgs boson, discovered recently, was the last of the particle predicted by the SM. However, many other phenomena, like existence of dark energy, dark matter, absence of anti-matter, the parameters in the SM, neutrino masses etc. are not explained by the SM. So, in order to find out what lies beyond the SM, i.e., what conditions at the earliest fractions of the first second of the universe gave rise to the SM, we constructed the Large Hadron Collider (LHC) at CERN after the Tevatron collider at Fermi National Accelerator Laboratory. Each of these projects helped us push the boundary further with new insights as we explore a yet higher energy regime. The experiments are extremely complex, and as we push the boundaries of our existing knowledge, it also requires pushing the boundaries of our technical knowhow. So, not only do we pursue humankind’s most basic intellectual pursuit of knowledge, we help develop technology that benefits today’s highly technical society. Our trained Ph.D. students become experts at fast computing, manipulation of large data volumes and databases, developing cloud computing, fast electronics, advanced detector developments, and complex interfaces in several of these areas. Many of the Particle physics Ph.D.s build their careers at various technology and computing facilities, even financial institutions use some of their skills of simulation and statistical prowess. Additionally, last

  19. Energy problems in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Tasugi, Hirosaburo [Japan Industrial Tech. Association, Tokyo, Japan

    1989-06-20

    In order to rid the people's living of poverty in developing countries, first, the production of food has been planned to increase. And then, resource development and industrialization have been tried to improve with efforts. Because of such development and an increase in population, energy consumption has been increasing. Advanced countries have supported these countries in many ways, however, there is much difference in their assistance depend on various situations such as racial, religious, and political ones. Moreover, a gap between cities and farm villages has widen since infrastructure has not been fully equipped in developing countries. The electrification ratio is used as an index to show the degree of development in developing countries. It is low in the countries where development is lagging, particularly in farm villages. This gap is an urgent problem that faces developing countries. In order to cope with the actual conditions, advanced countries including Japan should be plan to reinforce their technological and economic assistance more suitable for farm villages. Furthermore, they should also improve the assistance system which includes a measure for environmental pollution control, considering the spot directly. 3 figs., 14 tabs.

  20. Development of emergency response training focusing on non-technical skills. (2) Extraction of non-technical skills

    International Nuclear Information System (INIS)

    Matsui, Yuko; Hikono, Masaru; Iwasaki, Mari; Morita, Mizuho

    2017-01-01

    This study aimed at characterizing a non-technical skill exercise for on-site managers in charge of initial response at an emergency response center by extracting and clarifying the behavior examples of non-technical skills shown in the exercise scenario. From video observations, the non-technical skill examples were identified from seven of the eight nontechnical skill categories which had been defined when the training program was developed. Especially, they included many skills of 'Communication', 'Situation Understanding' and 'Organizational management'. At the same time, the limitation when extracting the cases by observations was identified. The extracted non-technical skill cases are expected to be used for characterizing exercise scenarios, as well as provide knowledge to raise the awareness of exercise participants. (author)

  1. Final Technical Report - Nuclear Studies with Intermediate Energy Probes

    Energy Technology Data Exchange (ETDEWEB)

    Norum, Blaine [Univ. of Virginia, Charlottesville, VA (United States)

    2017-12-14

    During the almost 20 year period of this grant research was carried out on atomic nuclei and their constituents using both photons and electrons. Research was carried out at the electron accelerator facility of the Netherlands Institute for Nuclear and High Energy Physics (NIKHEFK, Amsterdam) until the electron accelerator facility was closed in 1998. Subsequently, research was carried out at the Laser-Electron Gamma Source (LEGS) of the National Synchrotron Light Source (NSLS) located at the Brookhaven National Laboratory (BNL) until the LEGS was closed at the end of 2006. During the next several years research was carried out at both the Thomas Jefferson National Accelerator Facility (JLAB) and the High Intensity Gamma Source (HIGS) of the Tri-Universities Nuclear Laboratory (TUNL) located on the campus of Duke University. Since approximately 2010 the principal focus was on research at TUNL, although analysis of data from previous research at other facilities continued. The principal early focus of the research was on the role of pions in nuclei. This was studied by studying the production of pions using both photons (at LEGS) and electrons (at NIKHEF-K and JLAB). Measurements of charged pion photoproduction from deuterium at LEGS resulted in the most interesting result of these two decades of work. By measuring the production of a charged pion (p + ) in coincidence with an emitted photon we observed structures in the residual two-nucleon system. These indicated the existence of long-lived states not explicable by standard nuclear theory; they suggest a set of configurations not explicable in terms of a nucleon-nucleon pair. The existence of such “exotic” structures has formed the foundation for most of the work that has ensued.

  2. Energy in developing countries and the role of nuclear energy

    International Nuclear Information System (INIS)

    Goldemberg, Jose

    1986-01-01

    The role of nuclear energy in developing countries is discussed with respect to energy consumption, energy needs and energy future. The application of Article IV of the Non-Proliferation Treaty (NPT) is examined for the developing countries. It is suggested that a revision of the NPT is needed to encourage effective nuclear disarmament. (UK)

  3. Exploring China’s offshore wind energy potential in a comprehensive perspectives of technical, environmental and economic constraints

    DEFF Research Database (Denmark)

    Hong, Lixuan; Möller, Bernd

    with projections of current wind turbine technology development to calculate the maximum amount of offshore wind energy that could be generated. Secondly, to calculate practical potential, the migratory path of an endangered bird and existing shipping lanes and submarine cables are excluded from the calculated......Adequate recognition of offshore wind energy potential may have far-reaching influence on the development of future energy strategies. This study aims to investigate available offshore wind energy resource in China’s exclusive economic zones (EEZs) with the aid of a Geographical Information System...... (GIS), which allows the influence of technical, spatial and economic constraints on raw offshore wind potential being reflected in a continuous space. Firstly, based on ocean wind speed data gained from satellite QuikSCAT, raw potential are identified. Those findings are then used along...

  4. Material and energy balances of technical means in horticulture and farming - from production to disposal

    International Nuclear Information System (INIS)

    1993-01-01

    The twenty papers of this progress report, which are not individually recorded, belong to either one of the subject areas ''material and energy balances of technical means in horticulture and forming from production to disposal'' and ''plastics in construction and technical systems''. The first-mentioned subject area deals with balances for technical means at horticultural enterprises, greenhouse constructions, and styrofoam in farm buildings, and comprises short papers on sewage treatment plants in the form of beds of plants and ecological aspects of horticultural activities in open spaces. The second subject area mainly concerns recycling and multiple uses of plastics (silage and protective foils) as well as air-flow thermal collector systems. Advances in the construction and use of foil-covered greenhouses and experience with protective nets for plant cultures, energy shields, and shading are reported. (UWA) [de

  5. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department`s materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department.

  6. Energy Materials Coordinating Committee (EMaCC): Fiscal year 1996. Annual technical report

    International Nuclear Information System (INIS)

    1997-08-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. In addition, EMaCC assists in obtaining materials-related inputs for both intra- and interagency compilations. The EMaCC reports to the Director of the Office of Energy Research in his or her capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1996 and describes the materials research programs of various offices and divisions within the Department

  7. An endogenous growth model with embodied energy-saving technical change

    International Nuclear Information System (INIS)

    Van Zon, A.; Yetkiner, I. H.

    2003-01-01

    In this paper, we extend the Romer [Journal of Political Economy 98 (Part 2) (1990) S271] model in two ways. First we include energy consumption of intermediates. Second, intermediates become heterogeneous due to endogenous energy-saving technical change. We show that the resulting model can still generate steady state growth, but the growth rate depends negatively on the growth of real energy prices. The reason is that real energy price rises will lower the profitability of using new intermediate goods, and hence, the profitability of doing research, and therefore have a negative impact on growth. We also show that the introduction of an energy tax that is recycled in the form of an R and D subsidy may increase growth. We conclude that in order to have energy efficiency growth and output growth under rising real energy prices, a combination of R and D and energy policy is called for

  8. Task 2 Report - A GIS-Based Technical Potential Assessment of Domestic Energy Resources for Electricity Generation.

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Grue, Nicholas W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Rosenlieb, Evan [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-03-14

    The purpose of this report is to support the Lao Ministry of Energy and Mines in assessing the technical potential of domestic energy resources for utility scale electricity generation in the Lao PDR. Specifically, this work provides assessments of technical potential, and associated maps of developable areas, for energy technologies of interest. This report details the methodology, assumptions, and datasets employed in this analysis to provide a transparent, replicable process for future analyses. The methodology and results presented are intended to be a fundamental input to subsequent decision making and energy planning-related analyses. This work concentrates on domestic energy resources for utility-scale electricity generation and considers solar photovoltaic, wind, biomass, and coal resources. This work does not consider potentially imported energy resources (e.g., natural gas) or domestic energy resources that are not present in sufficient quantity for utility-scale generation (e.g., geothermal resources). A technical potential assessment of hydropower resources is currently not feasible due to the absence of required data including site-level assessments of multiple characteristics (e.g., geology environment and access) as well as spatial data on estimated non-exploited hydropower resources. This report is the second output of the Energy Alternatives Study for the Lao PDR, a collaboration led by the Lao Ministry of Energy and Mines and the United States Agency for International Development under the auspices of the Smart Infrastructure for the Mekong program. The Energy Alternatives Study is composed of five successive tasks that collectively support the project's goals. This work is focused on Task 2 - Assess technical potential of domestic energy resources for electricity generation. The work was carried out by a team from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) in collaboration with the Lao Ministry of Energy

  9. Energy control and sustainable development

    International Nuclear Information System (INIS)

    2002-01-01

    The contributions are dealing with the different aspects of energy control: key figures of the world consumption, evolution perspectives (energy control and energy demand in middle- and long-term world scenarios, global challenges, European perspectives, energy control in public decision in France, the new French energy accounting), regional differences (energy control in the United States, Russia, China, India, Brazil, West Africa, Mediterranean Sea), energy control and society (electricity privatisation in Salvador, regulatory approach or voluntary agreements for domestic appliances, comparison of energy control and renewable energies in France, complex accounting for energy demand control in a consumption society)

  10. The Ninth International scientific and technical conference Safety, efficiency and economy of atomic energy. Book of abstracts

    International Nuclear Information System (INIS)

    2014-01-01

    The abstracts of the Ninth International scientific and technical conference Safety, efficiency and economy of atomic energy are present. The conference took place in Moscow, 21-23 May, 2014. The problems of WWER, RBMK, BN and EhGP-6 NPPs operation, maintenance and repair; materials testing and metallic structures control; radioactive wastes and spent fuel management; NPP decommissioning; radiation safety, NPP ecology, emergency preparedness were discussed on the conference. The great attention was paid to the problems of atomic energy economy and its developing, international cooperation for NPP safety and young NPP specialists training [ru

  11. Renewable energies in transition: from their social acceptability to their socio-technical feasibility

    International Nuclear Information System (INIS)

    Zelem, M.C.

    2012-01-01

    The increasing recourse to renewable energies presents an opportunity to guarantee the smooth passage from an energy guzzling and carbon emitting system to one with more reasonable characteristics, allowing our societal structures to aspire for longer durability. This process entails putting aside the notion of social acceptability, which tends to place the weight of responsibility for our energy devouring life styles on consumers, replacing it by the notion of socio-technical feasibility which forces questioning the meaning of technology and political choices in energy matters. (author)

  12. Sodium-cooled reactors, objectives, achieved technical state and development trends

    International Nuclear Information System (INIS)

    Wolff, U.

    1988-01-01

    The use of fossil fuels to cover the future world-wide energy demand alone would rapidly deplete these ressources, especially oil and gas. Today's knowledge suggests the enhanced exploitation of solar energy, nuclear fusion and the application of uranium in sodium-cooled breeder reactors as the alternative energies offering a great potential. The sodium-cooled reactor outdistances the other options in terms of development. Its technical feasibility and safe operation have been verified and its profitability appears to be possible when using today's technology. The verification of its profitability while maintaining a high safety level is the overriding task for the future. The paper discusses corresponding activities in the USA, the USSR, Japan and Western Europe. (orig.) [de

  13. Technical Diagnostics of Ventilation Units for Energy Efficiency and Safety of Operation

    Directory of Open Access Journals (Sweden)

    Kuzin Evgeny

    2017-01-01

    Full Text Available The article considers the questions of application of technical diagnostics fan installations methods for providing safe operation, the system of the technical maintenance improvement and repair. Due to the feet that one of the most important aspects in fan operation in mining is energy efficiency and energy saving, the lack of the data in the control of the level in vibration of stationary sensors is shown. The necessity of taking into account the geometric parameters of the intake channel has been shown, and also the necessity of creation of the reference masks for the assessment of technical condition and energy efficiency when operating fan installations in mining. The results of technical diagnostics of the main fans using the methods of vibration diagnostics are provided. Aspects of vibration at characteristic points are shown. The necessity for further accumulation of data characterizing vibration for adjustment of the reference masks and more accurate detection of defects and deviations from the energy-efficient mode of operation of the fan installations is given.

  14. "Type Ia Supernovae: Tools for Studying Dark Energy" Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Woosley, Stan [Lick Observatory, San Jose, CA (United States); Kasen, Dan [Univ. of California, Berkeley, CA (United States)

    2017-05-10

    Final technical report for project "Type Ia Supernovae: Tools for the Study of Dark Energy" awarded jointly to scientists at the University of California, Santa Cruz and Berkeley, for computer modeling, theory and data analysis relevant to the use of Type Ia supernovae as standard candles for cosmology.

  15. A technical and economic analysis of one potential pathway to a 100% renewable energy system

    DEFF Research Database (Denmark)

    Connolly, David; Mathiesen, Brian Vad

    2014-01-01

    requirements, 5) adding flexible electricity demands and electric vehicles, 6) producing synthetic methanol/DME for transport, and finally 7) using synthetic gas to replace the remaining fossil fuels. For each stage, the technical and economic performance of the energy system is calculated. The results...

  16. Combining offshore wind energy and large-scale mussel farming: background & technical, ecological and economic considerations

    NARCIS (Netherlands)

    Lagerveld, S.; Rockmann, C.; Scholl, M.M.; Bartelings, H.; Burg, van den S.W.K.; Jak, R.G.; Jansen, H.M.; Klijnstra, J.; Leopold, M.F.; Poelman, M.; Smith, S.R.; Stavenuiter, J.; Veenstra, F.A.; Veltman, C.; Westra, C.

    2014-01-01

    This Blauwdruk project report presents background and technical, ecological and economic considerations of the potential combination of offshore wind energy production and large-scale mussel farming in offshore areas in the North Sea. The main objective of the Blauwdruk project was to study the

  17. Technical Diagnostics of Ventilation Units for Energy Efficiency and Safety of Operation

    Science.gov (United States)

    Kuzin, Evgeny; Shahmanov, Vitality; Dubinkin, Dmitriy

    2017-11-01

    The article considers the questions of application of technical diagnostics fan installations methods for providing safe operation, the system of the technical maintenance improvement and repair. Due to the feet that one of the most important aspects in fan operation in mining is energy efficiency and energy saving, the lack of the data in the control of the level in vibration of stationary sensors is shown. The necessity of taking into account the geometric parameters of the intake channel has been shown, and also the necessity of creation of the reference masks for the assessment of technical condition and energy efficiency when operating fan installations in mining. The results of technical diagnostics of the main fans using the methods of vibration diagnostics are provided. Aspects of vibration at characteristic points are shown. The necessity for further accumulation of data characterizing vibration for adjustment of the reference masks and more accurate detection of defects and deviations from the energy-efficient mode of operation of the fan installations is given.

  18. Final Technical Progress Report: Development of Low-Cost Suspension Heliostat; December 7, 2011 - December 6, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Bender, W.

    2013-01-01

    Final technical progress report of SunShot Incubator Solaflect Energy. The project succeeded in demonstrating that the Solaflect Suspension Heliostat design is viable for large-scale CSP installations. Canting accuracy is acceptable and is continually improving as Solaflect improves its understanding of this design. Cost reduction initiatives were successful, and there are still many opportunities for further development and further cost reduction.

  19. Technical and economic feasibility of thermal energy storage. Thermal energy storage application to the brick/ceramic industry. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Glenn, D.R.

    1976-10-01

    An initial project to study the technical and economic feasibility of thermal energy storage (TES) in the three major consumer markets, namely, the residential, commercial and industrial sectors is described. A major objective of the study was to identify viable TES applications from which a more concise study could be launched, leading to a conceptual design and in-depth validation of the TES energy impacts. This report documents one such program. The brick/ceramic industries commonly use periodic kilns which by their operating cycle require time-variant energy supply and consequently variable heat rejection. This application was one of the numerous TES opportunities that emerged from the first study, now available from the ERDA Technical Information Center, Oak Ridge, Tennessee, identified as Report No. COO-2558-1.

  20. Energy transition and legal transition: renewable energies development in France

    International Nuclear Information System (INIS)

    Darson, Alice

    2015-01-01

    The way to an energy transition will be reached with an integration of renewable energies in our energy mix. This development includes a legal transition because the current legal context that applies to green energies is not efficient and does not contribute to this emergency. Changing the legal frame becomes a necessity and particularly the way these energies are governed, planned and supported. It's also important that administrative procedures that regulate the implantation of energies production system are set. At last, this legal transition will have to conciliate imperatives linked to the development of renewable energies with those governing the protection of surroundings, all aiming to a sustainable development. (author) [fr

  1. Renewable energy policy and wind energy development in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Zitzer, Suzanne E [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Leipzig (Germany). Department Urban Ecology, Environmental Planing and Transport

    2009-07-15

    The author of the contribution under consideration reports on the renewable energy policy and wind energy development in the Federal Republic of Germany. First of all, the author describes the historical development of the renewable energy policy since the 1970ies. Then, the environmental policies of the Red-Green Coalition (till to 2005) and of the Grand Coalition (since 2005) as well as the Renewable Energy Sources Act are described. The next section of this contribution is concern to the development of wind energy in the Federal Republic of Germany under consideration of onshore wind energy and offshore wind energy.

  2. Linking Gateway Technical College with Workforce Development: The SC Johnson-A Family Company Story.

    Science.gov (United States)

    Knudson, Edward

    2004-01-01

    Seven years ago, SC Johnson--A Family Company approached Gateway Technical College with a need to further strengthen their incumbent workforce's technical training and education. Retirements, brain drain, and competition for technical expertise were the forces driving SC Johnson to develop a comprehensive, flexible, and timely workplace education…

  3. Marine renewable energies: status and development perspectives

    International Nuclear Information System (INIS)

    2011-01-01

    This document proposes an overview of the marine renewable energy (MRE) market, of the development perspectives, of the industrial, academic and institutional actors, of current technologies and technologies under development, and of French and European research and development programs. These energies comprise: tidal energy, the exploitation of sea temperature differences with respect with depth, wave energy, marine current power energy, osmotic and marine biomass energy

  4. Financing Opportunities for Renewable Energy Development in Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Ardani, K.; Hillman, D.; Busche, S.

    2013-04-01

    This technical report provides an overview of existing and potential financing structures for renewable energy project development in Alaska with a focus on four primary sources of project funding: government financed or supported (the most commonly used structure in Alaska today), developer equity capital, commercial debt, and third-party tax-equity investment. While privately funded options currently have limited application in Alaska, their implementation is theoretically possible based on successful execution in similar circumstances elsewhere. This report concludes that while tax status is a key consideration in determining appropriate financing structure, there are opportunities for both taxable and tax-exempt entities to participate in renewable energy project development.

  5. Green paper - towards a European strategy for the security of energy supply, technical document

    International Nuclear Information System (INIS)

    2005-01-01

    The Green Paper sets forth a series of questions regarding the security of energy in Europe. It addresses the issue of increased consumption and dependence on oil, and sketches out possible strategies for broadening the energy supply and slowing global warming. It draws an alarming picture of the EU energy situation. If no action is taken, it predicts that the EU energy dependency will climb from 50% in 2000 to 70% in 2030. The particular situation for the main imported fossil fuels is described. This technical paper is particularly devoted to the context, the energy sources, the supply disruption, the energy demand, the fuel balance, the energy technology and the transport of fuel in the EU (transit). (A.L.B.)

  6. Energy and durable development: the place of the renewable energies

    International Nuclear Information System (INIS)

    2001-01-01

    The 29 may 2000, took place at the UNESCO, a colloquium on the place of the renewable energies facing the economic development. This document presents the opening presentation of A. Antolini and L. Jospin and the colloquium papers and debates in the following four domains: the energy challenges of the durable development, the renewable energies sources facing the european directive, the thermal renewable energies (solar, geothermics and biomass) and the greenhouse effect, the world market of the renewable energies. (A.L.B.)

  7. FY 2000 report on the trend survey of technical development of high speed/high function electronic devices such as quantum functional devices in association with the rationalization of energy utilization; 2000 nendo energy shiyo gorika ni kakawaru ryoshika kino soshi nado kosoku kokino denshi device no gijutsu kaihatsu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Concerning the results of the R and D made by NEDO of superlattice devices (FY 1981-1990) and quantum functional devices (QFD) (FY 1991-2000) as high speed/high function electronic devices, this survey was aimed at investigating the trend of the newest technology to grasp the technical effects, the state of commercialization/product-making, and the future. The effects, technical subjects, etc. in the R and D of superlattice devices were succeeded to the R and D of QFD as the succeeding project. Here, therefore, the paper arranged the outlook of the commercialization/product-making in relation to the R and D of QFD and the future R and D subjects. In the R and D, features of QFD as target were made clear. The commercialization is limited to Motorola's QMMIC, Fujitsu's RHET, etc. As to the other R and D items, subjects of the technical development to be implemented toward the commercialization just became clear. The subject is the heightening of micro (nano meter) processing technology. The important subject, in particular, is compatibility of the heightening of micro processing and the improvement of throughput. (NEDO)

  8. Energy in the Developing World

    Science.gov (United States)

    Gadgil, Ashok; Fridley, David; Zheng, Nina; Sosler, Andree; Kirchstetter, Thomas; Phadke, Amol

    2011-11-01

    The five billion persons at the lower economic levels are not only poor, but commonly use technologies that are less efficient and more polluting, wasting their money, hurting their health, polluting their cites, and increasing carbon dioxide in the atmosphere. Many first-world researchers, including the authors, are seeking to help these persons achieve a better life by collaborating on need-driven solutions to energy problems. Here we examine three specific examples of solutions to energy problems, and mitigation strategies in the developing world: (1) Energy Efficiency Standards and Labeling in China. Between 1990 and 2025, China will add 675 million new urban residents, all of whom expect housing, electricity, water, transportation, and other energy services. Policies and institutions must be rapidly set up to manage the anticipated rapid rise in household and commercial energy consumption. This process has progressed from legislating, and setting up oversight of minimum energy performance standards in 1989 (now on 30 products) to voluntary efficiency labels in 1999 (now on 40 products) and to mandatory energy labels in 2005 (now on 21 products). The savings from just the standards and labels in place by 2007 would result in cumulative savings of 1188 teraWatt—hours (TWh) between 2000-2020. By 2020, China would save 110 TWh/yr, or the equivalent of 12 gigaWatts (GW) of power operating continuously. (2) Fuel-efficient biomass cookstoves to reduce energy consumption and reduce pollution. Compared to traditional cooking methods in Darfur, the BDS cooks faster, reduces fuel requirement, and emits less carbon monoxide air pollution. A 2010 survey of 100 households showed that users reduced spending on fuelwood in North Darfur camps from 1/2 of household non-fuelwood budget to less than 1/4 of that budget. The survey showed that each 20 stove puts 330/year in the pocket of the women using the stove, worth 1600 over the stove-life of 5 years. Per capita income of

  9. Energy autarky: A conceptual framework for sustainable regional development

    International Nuclear Information System (INIS)

    Mueller, Matthias Otto; Staempfli, Adrian; Dold, Ursula; Hammer, Thomas

    2011-01-01

    Energy autarky is presented as a conceptual framework for implementing sustainable regional development based on the transformation of the energy subsystem. It is conceptualized as a situation in which the energy services used for sustaining local consumption, local production and the export of goods and services are derived from locally renewable energy resources. Technically, the implementation of higher degrees of energy autarky rests on increasing energy efficiency, realizing the potential of renewable energy resources and relying on a decentralized energy system. Practically, a transition towards regional energy autarky requires administrations and civil society actors to initialize and develop projects at the local level, ensure their acceptance and support by the regional population and implement the project in collaboration with relevant actors. Besides the description of the concept and the benefits its implementation brings, this article provides a process for implementation, and some examples from Austria, Germany and Switzerland. - Highlights: → We introduce energy autarky as a conceptual framework for sustainable development. → Transforming the energy subsystem creates various benefits for communities. → Local participation should lead to social acceptance of renewables. → We review and discuss projects implementing energy autarky. → Further research needs to compare successful implementations with failures.

  10. 9 May 2008 - Signature of the Protocol to the co-operation agreement dated 21 January 2006 between King Abdulaziz City for Science and Technology (KACST) on behalf of the Government of the Kingdom of Saudi Arabia, represented by M. I. Al-Suwaiyel and the European Organization for Nuclear Research (CERN), represented by R. Aymar, concerning the further development of scientific and technical co-operation in high-energy physics

    CERN Multimedia

    Maximilien Brice

    2008-01-01

    9 May 2008 - Signature of the Protocol to the co-operation agreement dated 21 January 2006 between King Abdulaziz City for Science and Technology (KACST) on behalf of the Government of the Kingdom of Saudi Arabia, represented by M. I. Al-Suwaiyel and the European Organization for Nuclear Research (CERN), represented by R. Aymar, concerning the further development of scientific and technical co-operation in high-energy physics

  11. Energy Materials Coordinating Committee (EMaCC): Annual technical report, Fiscal year 1987

    International Nuclear Information System (INIS)

    1988-09-01

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1987 and describes the materials research programs of various offices and divisions within the Department

  12. NTRCI Legacy Engine Research and Development Project Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Smith-Holbert, Connie [National Transportation Research Center, Inc., Knoxville, TN (United States); Petrolino, Joseph [National Transportation Research Center, Inc., Knoxville, TN (United States); Watkins, Bart [Power Source Technologies Inc., Corvallis, OR (United States); Irick, David [Power Source Technologies Inc., Corvallis, OR (United States)

    2011-12-31

    The Legacy engine is a completely new design, transitional diesel engine, replacing the reciprocating engine with a rotary engine. The Legacy engine offers significant advances over conventional internal combustion engines in 1) power to weight ratio; 2) multiple fuel acceptance; 3) fuel economy; and 4) environmental compliance. These advances are achieved through a combination of innovative design geometry, rotary motion, aspiration simplicity, and manufacturing/part simplicity. The key technical challenge to the Legacy engine's commercialization, and the focus of this project, was the development of a viable roton tip seal. The PST concept for the roton tip seal was developed into a manufacturable design. The design was evaluated using a custom designed and fabricated seal test fixture and further refined. This design was incorporated into the GEN2.5A prototype and tested for achievable compression pressure. The Decision Point at the end of Phase 1 of the project (described below) was to further optimize the existing tip seal design. Enhancements to the tip seal design were incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Compression pressures adequate for compression ignition of diesel fuel were achieved, although not consistently in all combustion volumes. The variation in compression pressures was characterized versus design features. As the roton tip seal performance was improved, results pointed toward inadequate performance of the housing side seals. Enhancement of the housing side seal system was accomplished using a custom designed side seal test fixture. The design enhancements developed with the test fixture were also incorporated into the GEN2.5B prototype and tested and evaluated using the iterative research strategy described below. Finally, to simplify the requirements for the roton tip seals and to enhance the introduction and combustion of fuel, a flush-mount fuel injector

  13. Technical Development of Slurry Three-Dimensional Printer

    Science.gov (United States)

    Jiang, Cho-Pei; Hsu, Huang-Jan; Lee, Shyh-Yuan

    2017-09-01

    The aim of this paper is to review the technical development of slurry three-dimensional printer (3DP) which based on photo-polymerization and constrained surface method. Basically, slurry consists of ceramic powder, resin and photo-initiator. The light engines for solidifying the photo-curable slurry can be classified as laser, liquid crystal panel (LCD), digital light processing (DLP). The slurry can be reacted and solidified by selective ray according to the reaction spectrum of photo-initiator. Ceramic powder used in this study is zirconia oxide. Experimental results show that ceramic particle size affects the viscosity of slurry severely resulting in low accuracy and the occurrence of micro crack in the layer casting procedure. Therefore, the effect of particle size on the curability and accuracy of built green part is discussed. A single dental crown is proposed to be fabricated by these three light engines as a benchmark for comparison. In addition, the cost and the limitation are compared in the aspect of dental crown fabrication. Consequently, the lowest cost is LCD-type slurry 3DP system. DLP-type slurry 3DP can produce green body with the fastest fabrication time. The volumetric error of sintered part that made by these three fabrication methods is similar because the composition of slurry is the same.

  14. Status of Technical Requirements Development for Maintenance Effectiveness Management

    International Nuclear Information System (INIS)

    Ahn, Sang Kyu; Kim, Yun Il; Lee, Chang Ju; Chang, Gun Hyun

    2012-01-01

    It is well known that proper maintenance at nuclear power plant is essential to plant safety and that there is a clear link between effective maintenance and safety as it relates to such factors as the number of transients and challenges to safety systems and the associated need for operability, availability, and reliability of safety equipment. Good maintenance is also important in providing assurance that failures of non-safety related structures, systems, and components (SSCs) that could initiate, adversely affect, or mitigate a transient or an accident are also minimized. Maintenance is also important to ensure that design assumptions and margins in the original design basis are maintained and are not degraded to an unacceptable level. Therefore, good maintenance practice at nuclear power plants is of utmost importance in protecting public health and safety. This paper introduces the status of the development of regulatory technical requirements (Drafts) for utility's management of maintenance effectiveness. The process of Maintenance Effectiveness Management is shown in Figure 1

  15. Energy. Application of solar energy in dwellings: A technical and economical analysis for the European community

    Science.gov (United States)

    1980-03-01

    The technical possibilities and economical limitations of solar heating systems for the application in swimming pools, hot water preparation, space heating and air conditioning were investigated. This analysis was performed for dwellings with special consideration of the climatic differences in each community. The computer program, which was used for solar system calculations, and all mathematical models, for technical and economical analysis were elucidated. In the technical and economical analysis, the most suitable solar system sizes for each community was determined. Four types of solar collectors were investigated. The single glass selective collector proved to be the most cost effective collector in all the above applications, provided the the additional cost for the selective coating is not more than 20DM/cu. From the results of the analysis certain recommendations were derived, which can improve the rapid implementation of solar heating systems into the market.

  16. The Role of Technical Innovation and Sustainability on Energy Consumption: A Case Study on the Taiwanese Automobile Industry

    Directory of Open Access Journals (Sweden)

    Chao-Wu Chou

    2015-06-01

    Full Text Available The impact of global warming and climate change is one of the most critical challenges of the 21st century. The greenhouse effect caused by technological development and industrial pollution has accelerated the speed of global warming. The continuous improvement in automobile energy consumption is one of the most effective ways to reduce global warming. A comparative analysis is proposed to examine the various automobiles that utilize technological innovation to improve their energy consumption. Their contribution to CO2 emissions is then investigated. This study focuses on technical innovation and output power of a conventional engine. The results indicate that innovative engines (such as the Ford turbo petrol/diesel engine, the EcoBoost/TDCi have improved energy consumption and reduce CO2 emissions. In addition, the Toyota hybrid vehicles have also improved energy consumption and reduced greenhouse gases emissions.

  17. Development of galvanic high energy cells with molten salt electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Borger, W.; Ely, G.; Kunze, D.; Laig-Hoerstebrock, H.; Panesar, H.; Sterr, G.; Wunderlich, A.

    1985-01-01

    The development work during the period 1980-1983 was mainly directed towards the development of technical LiAl/FeS cells, the development of separators, tests of cells and modules, and more basic work. An important objective was the improvement of cycle life at constant specific energy. Technical cells with 140 Ah nominal capacity at the five hour rate and 100 Wh.kg/sup -1/ specific energy performed up to 400 full cycles (30 A discharge), while in 10 Ah test cells more than 2000 full cycles have been demonstrated. The improvement of cycle life of technical cells was achieved by the use of improved separators fabricated from MgO-powder and by a vacuum-tight electrical feedthrough. A design concept of a 10 cell module has been developed based upon 200 Ah cell with two positive and three negative plates. A detailed investigation of safety aspects showed that there is no specific risk related to the LiAl/molten salt/FeS system. Thermal management of a 24 kWh battery was investigated and the Ohmic heat generated in the leads seems to be the critical factor. A range of total materials cost between 60 and 130 DM/kWh has been estimated. The price of LiAl/FeS batteries will most probably also be in the range of conventional secondary batteries. The cost/benefit analysis shows a considerable potential of energy conservation by the use of light-weight high energy batteries. Compared with a expected technical life of 7 years a pay-back period between 2 and 6 years seems attractive. However, the economy of the electric vehicle is strongly influenced by the higher purchase price of an electric vehicle and the present energy level.

  18. Development of the Advanced Energy Design Guide for K-12 Schools -- 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.; Torcellini, P.

    2013-02-01

    This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-K12) (ASHRAE et al. 2011a). The AEDG-K12 provides recommendations for achieving 50% whole-building energy savings in K-12 schools over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-K12 was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE).

  19. Acquisition and Development of System Command (SYSCOM) Technical Manuals

    National Research Council Canada - National Science Library

    2003-01-01

    ... (NAVSEA) and Space and Naval Warfare Systems Command (SPAWAR). TMs are the primary information source for technical training, installation, operation, testing, maintenance, and repair associated with NAVSEA/SPAWAR systems or equipment...

  20. Research and Development Issues for Interactive Electronic Technical Manuals

    National Research Council Canada - National Science Library

    Ricci, Katrina

    2002-01-01

    ... technologies to support Interactive Electronic Technical Manuals (IETMs). A workshop was conducted at the NAVAIR Orlando, Training Systems Division to discuss the domain and to present current research in this area...

  1. IAEA technical meeting on fissile material strategies for sustainable nuclear energy

    International Nuclear Information System (INIS)

    Ganguly, Chaitanyamoy; Koyama, Kazutoshi

    2005-01-01

    A Technical Meeting (TM) on 'Fissile Material Management Strategies for Sustainable Nuclear Energy' was organized by the International Atomic Energy Agency (IAEA) in Vienna from 12 to 15 September 2005. Prior to the TM, three Working Groups (WG) composed of experts from 10 countries prepared Key Issues papers on: 1) Uranium Demand and Supply through 2050; 2) Back-end Fuel Cycle Options; and 3) Sustainable Nuclear Energy beyond 2050: Cross-cutting Issues. Some 36 papers, including 3 key issue papers, were presented during the TM in 3 different sessions. The present paper summarizes the deliberations of the TM. (author)

  2. Policy for geothermal energy development

    Energy Technology Data Exchange (ETDEWEB)

    Kiuchi, S [Public Utilities Bureau, Ministry of International Trade and Industry, Japan

    1973-01-01

    Government actions related to Japanese geothermal energy development in the past include: a mining and industrial research subsidy of 27 million yen granted to Kyushu Electric Power Co. in 1952, a mining and industrial research subsidy of 13 million yen granted to Japan Metals and Chemicals Co. in 1960, a study on steam production technology for geothermal power generation by Japan Metals and Chemicals Co. funded at 3.5 hundred million yen from the Research Development Corporation of Japan, and a study on steam production technology for large scale geothermal power generation by Japan Metals and Chemicals Co. funded at 7.6 hundred million yen by the Research Development Corporation of Japan. The following projects are planned by the Ministry of International Trade and Industry for 1973: a two-year geothermal power promotion including investigations into the utilization of hot water, new methods for geothermal reservoir detection and steam well drilling, and environmental effects, studies on hydrothermal systems, basic investigations for geothermal indicators in 30 areas, and a means to finance the construction of geothermal power plants in Kakkonda (Iwate Prefecture) and Hatchobara (Oita Prefecture).

  3. MITT writer and MITT writer advanced development: Developing authoring and training systems for complex technical domains

    Science.gov (United States)

    Wiederholt, Bradley J.; Browning, Elica J.; Norton, Jeffrey E.; Johnson, William B.

    1991-01-01

    MITT Writer is a software system for developing computer based training for complex technical domains. A training system produced by MITT Writer allows a student to learn and practice troubleshooting and diagnostic skills. The MITT (Microcomputer Intelligence for Technical Training) architecture is a reasonable approach to simulation based diagnostic training. MITT delivers training on available computing equipment, delivers challenging training and simulation scenarios, and has economical development and maintenance costs. A 15 month effort was undertaken in which the MITT Writer system was developed. A workshop was also conducted to train instructors in how to use MITT Writer. Earlier versions were used to develop an Intelligent Tutoring System for troubleshooting the Minuteman Missile Message Processing System.

  4. Development of TRITN : In-house technical information network of Technical Research Institute in The Chugoku Electric Power Co., Inc.

    Science.gov (United States)

    Ebara, Hisao

    With the increase in information amount, progress in information network, diversified technology and change in in-house organization the Technical Research Institute has necessitated to shift the conventional technical database processing by use of personal computers into new system promised for future use. It enables to; provide classification system which meets the needs of the institute; execute distributed processing using workstations; make the low cost processing using commercial softwares; make networks using LAN, WAN personal computer communication, and provide primary materials (text data) on facsimiles using optical disks. Such features are those of technical information database system "TRITN" which is available to any persons and at any time. This paper describes how TRITN was developed and the system outline.

  5. Large Energy Development Projects: Lessons Learned from Space and Politics

    International Nuclear Information System (INIS)

    Schmitt, Harrison H.

    2005-01-01

    The challenge to global energy future lies in meeting the needs and aspirations of the ten to twelve billion earthlings that will be on this planet by 2050. At least an eight-fold increase in annual production will be required by the middle of this century. The energy sources that can be considered developed and 'in the box' for consideration as sources for major increases in supply over the next half century are fossil fuels, nuclear fission, and, to a lesser degree, various forms of direct and stored solar energy and conservation. None of these near-term sources of energy will provide an eight-fold or more increase in energy supply for various technical, environmental and political reasons.Only a few potential energy sources that fall 'out of the box' appear worthy of additional consideration as possible contributors to energy demand in 2050 and beyond. These particular candidates are deuterium-tritium fusion, space solar energy, and lunar helium-3 fusion. The primary advantage that lunar helium-3 fusion will have over other 'out of the box' energy sources in the pre-2050 timeframe is a clear path into the private capital markets. The development and demonstration of new energy sources will require several development paths, each of Apollo-like complexity and each with sub-paths of parallel development for critical functions and components

  6. Development of the world energy requirement until 2000

    International Nuclear Information System (INIS)

    Schmitt, D.

    1977-01-01

    In its final report entitled 'Energy Global Prospects 1985 - 2000' and in three technical reports the Workshop on Alternative Energy Strategies (WAES), which was attended by 70 experts from 15 countries, in the summer of this year published the first worldwide forecast of the energy requirement up to the year 2000. The uncertainties affecting the long term development caused the WAES to employ a scenario in which the variables were economic growth, price levels of energy (and oil, respectively), and energy policy. Additional variables included to describe the long term problems arising in meeting the energy requirement are the coal vs. nuclear power alternative, the gross additions to the oil reserves, and assumptions about OPEC production limits. In view of the long lead times of technological developments and the extraordinarily high capital investments involved, rethinking is necessary right now, according to the WAES study, to find a possibility to change to other sources of fossil energy, nuclear power and, finally, renewable sources of energy, in view of the impending scarcity of the most important present source of energy, i.e., oil. Since the chances to meet a growing energy requirement by natural gas are viewed sceptically and a major contribution of new sources of energy is not expected to come forth before the next century, coal and nuclear power will be the main sources of energy supply for a foreseeable period of time to come. (orig.) [de

  7. Critical technical issues and evaluation and comparison studies for inertial fusion energy reactors

    Energy Technology Data Exchange (ETDEWEB)

    Abdou, M.A. (Mechanical, Aerospace and Nuclear Engineering Dept., Univ. of California, Los Angeles, CA (United States)); Ying, A.Y. (Mechanical, Aerospace and Nuclear Engineering Dept., Univ. of California, Los Angeles, CA (United States)); Tillack, M.S. (Mechanical, Aerospace and Nuclear Engineering Dept., Univ. of California, Los Angeles, CA (United States)); Ghoniem, N.M. (Mechanical, Aerospace and Nuclear Engineering Dept., Univ. of California, Los Angeles, CA (United States)); Waganer, L.M. (McDonnell Douglas Aerospace, St. Louis, MI (United States)); Driemeyer, D.E. (McDonnell Douglas Aerospace, St. Louis, MI (United States)); Linford, G.J. (TRW Space and Electronics Div., Redondo Beach, CA (United States)); Drake, D.J.

    1994-01-01

    Two inertial fusion energy (IFE) reactor design concepts developed in the Prometheus studies were evaluated. Objectives were to identify and characterize critical issues and the R and D required to resolve them, and to establish a sound basis for future IFE technical and programmatic decisions. Each critical issue contains several key physics and engineering issues associated with major reactor components and impacts key aspects of feasibility, safety, and economic potential of IFE reactors. Generic critical issues center around: demonstration of moderate gain at low driver energy, feasibility of direct drive targets, feasibility of indirect drive targets for heavy ions, feasibility of indirect drive targets for lasers, cost reduction strategies for heavy ion drivers, demonstration of higher overall laser driver efficiency, tritium self-sufficiency in IFE reactors, cavity clearing at IFE pulse repetition rates, performance/reliability/lifetime of final laser optics, viability of liquid metal film for first wall protection, fabricability/reliability/lifetime of SiC composite structures, validation of radiation shielding requirements, design tools, and nuclear data, reliability and lifetime of laser and heavy ion drivers, demonstration of large-scale non-linear optical laser driver architecture, demonstration of cost effective KrF amplifiers, and demonstration of low cost, high volume target production techniques. Quantitative evaluation and comparison of the two design options have been made with special focus on physics feasibility, engineering feasibility, economics, safety and environment, and research and development (R and D) requirements. Two key conclusions are made based on the overall evaluation analysis. The heavy-ion driven reactors appear to have an overall advantage over laser-driven reactors.

  8. An A BWR demonstration simulator for training and developing technical staff

    International Nuclear Information System (INIS)

    Powers, J.; Yonezawa, H.; Aoyagi, Y.; Kataoka, K.

    2015-09-01

    The US-Advanced Boiling Water Reactor (A BWR), certified by the US NRC, is a third generation, evolutionary boiling water reactor design which is the reference for the South Texas Project Units 3 and 4 (STP3-4) Combined License Application (Cola). Nuclear Innovation North America (Nina) is the License Applicant for this new build project, and Toshiba is the selected primary technology contractor. Toshiba has developed a Demonstration Simulator of the A BWR control room that provides a realistic experience for training and education on BWR principles and operations fundamentals. The Demonstration Simulator is located in the Toshiba America Nuclear Energy (Tane) office in Charlotte, North Carolina and is composed of standard office computer equipment set up in a specific arrangement that is representative of the layout of an A BWR control room. The Demonstration Simulator is not intended for licensed operator training, but can provide a framework for encouraging entry level technically oriented nuclear workers to enter the operations field; strengthening the linkage between university energy field curricula and real-life application of theory; and, improving understanding of integrated plant operations for developing station technical staff. This paper describes the A BWR Demonstration Simulator and its applications for training and educating future nuclear workers. (Author)

  9. An A BWR demonstration simulator for training and developing technical staff

    Energy Technology Data Exchange (ETDEWEB)

    Powers, J. [Toshiba America Nuclear Energy, Charlotte, North Carolina (United States); Yonezawa, H.; Aoyagi, Y.; Kataoka, K., E-mail: jim.powers@toshiba.com [Toshiba Corporation, Kawasaki, Kanagawa (Japan)

    2015-09-15

    The US-Advanced Boiling Water Reactor (A BWR), certified by the US NRC, is a third generation, evolutionary boiling water reactor design which is the reference for the South Texas Project Units 3 and 4 (STP3-4) Combined License Application (Cola). Nuclear Innovation North America (Nina) is the License Applicant for this new build project, and Toshiba is the selected primary technology contractor. Toshiba has developed a Demonstration Simulator of the A BWR control room that provides a realistic experience for training and education on BWR principles and operations fundamentals. The Demonstration Simulator is located in the Toshiba America Nuclear Energy (Tane) office in Charlotte, North Carolina and is composed of standard office computer equipment set up in a specific arrangement that is representative of the layout of an A BWR control room. The Demonstration Simulator is not intended for licensed operator training, but can provide a framework for encouraging entry level technically oriented nuclear workers to enter the operations field; strengthening the linkage between university energy field curricula and real-life application of theory; and, improving understanding of integrated plant operations for developing station technical staff. This paper describes the A BWR Demonstration Simulator and its applications for training and educating future nuclear workers. (Author)

  10. Developing Students' Energy Literacy in Higher Education

    Science.gov (United States)

    Cotton, Debby R. E.; Miller, Wendy; Winter, Jennie; Bailey, Ian; Sterling, Stephen

    2015-01-01

    Purpose: This paper aims to investigate students' energy literacy at a UK university, and recommends ways in which it can be enhanced using a behaviour change model. Developing students' energy literacy is a key part of the "greening" agenda, yet little is known about how students develop their ideas about energy use and energy saving at…

  11. Capacity building for sustainable energy development

    International Nuclear Information System (INIS)

    Rogner, Hans-Holger

    2006-01-01

    Capacity Building for Sustainable Energy Development - Mission: To build capacity in Member States (MS) for comprehensive energy system, economic and environmental analyses to assist in: - making informed policy decisions for sustainable energy development; - assessing the role of nuclear power; - understanding environmental and climate change issues related to energy production and use

  12. Save with Renewable Energy: A Technical Bulletin for Federal Renewable Energy Champions

    Energy Technology Data Exchange (ETDEWEB)

    2003-11-01

    This eight-page publication, prepared in 2003 for the U.S. Department of Energy's Federal Energy Management Program by the DOE National Renewable Energy Laboratory, is an updated version of the former Save with Solar and Wind bulletin. Save with Renewable Energy provides up-to-date information about the progress that the government is making in achieving federal goals for renewable energy use; agencies have achieved about 60% of the current goal for 2005 of 1384 gigawatt-hours from renewable energy systems. This publication also describes current and planned federal projects featuring wind, solar, and geothermal systems in several different states.

  13. Wind energy development as a part of Poland's industrial development

    DEFF Research Database (Denmark)

    Stoerring, Dagmara; Hvelplund, Frede Kloster

    2003-01-01

    The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland....

  14. Status of Recent Developments in the Technical Standards of Japan

    International Nuclear Information System (INIS)

    Ahn, Hyung-Joon; Ahn, Sang-Kyu; Koh, Jae-Dong; Kim, Chang-Bum

    2006-01-01

    Japan has systematically revamped its technical standards for nuclear reactor facilities by formulating various performance regulations. Being part of a trend toward deregulation, such efforts toward social regulation is aimed at effectively operating administrative procedural laws to keep pace with global trends and enhance the benefits of deregulation under the principle of self-responsibility. Based on the collection of public opinions in February and March 2005, the Nuclear and Industrial Safety Agency(NISA) presented its position that it was required to promptly perform a flexible assessment of the technical feasibility of formulated society and association standards. Current, pressing issues are summarized as an early revision of technical standards regarding nuclear facilities for power generation, use of society and association standards, and the overhaul of nuclear safety regulations subject to performance regulations. Subjecting technical standards to performance regulations means stipulating the qualitative aspects of performance and the targets that certain facilities must achieve, which are not specific standards, but general compulsory standards. This study examines the early revision of technical standards on nuclear facilities for power generation and the status of the use of society and association standards, as well as introducing the details of revisions in the concrete containment vessel standards as specific examples

  15. Wind energy development in the light of Danish experiences

    International Nuclear Information System (INIS)

    Frandsen, S.

    1991-01-01

    Wind energy will undoubtedly play a significant role in the future energy supply being a nonpolluting energy source, which on a technical basis has proved to be an economically feasible and thus a realistic alternative to traditional power production. This conclusion may be drawn from Danish experiences where energy planning comprises a visible contribution from wind energy. Since 1976 more than 3200 wind turbine units have been installed in Denmark, representing a capacity of roughly 340 MW out of a grid capacity of 8,000 MW. These units are all grid-connected and the unit sizes range from 55 kW to 450 kW. The installed wind energy capacity represents a substantial development of technologies for wind energy utilization during the last 15 years, involving participation from many sides: research institutes, electric utilities, the national energy administration, and private industry. The development has implied a considerable improvement of the technical and economic performance of wind turbines along with increased reliability and durability. The successful development has been strongly supported by comprehensive government programmes, i.e. establishment of a national wind energy research programme, establishment of the Riso Test Station for Windmills and a subsidy scheme for private turbine owners. The improved economic performance is partly the result of a development in rotor size of commercially available wind turbines. In 1981 the largest commercial wind turbine size in Denmark was 55 kW, while today it is close to 500 kW. In the same period the average energy production per installed unit capacity almost doubled, due to enhanced aerodynamic rotor design, increased tower height and improved overall design and production methods. (author) 7 figs., 3 tabs., 13 refs

  16. High temperature gas cooled reactor technology development. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-12-01

    The successful introduction of an advanced nuclear power plant programme depends on many key elements. It must be economically competitive with alternative sources of energy, its technical development must assure operational dependability, the support of society requires that it be safe and environmentally acceptable, and it must meet the regulatory standards developed for its use and application. These factors interrelate with each other, and the ability to satisfy the established goals and criteria of all of these requirements is mandatory if a country or a specific industry is to proceed with a new, advanced nuclear power system. It was with the focus on commercializing the high temperature gas cooled reactor (HTGR) that the IAEA's International Working Group on Gas Cooled Reactors recommended this Technical Committee Meeting (TCM) on HTGR Technology Development. Over the past few years, many Member States have instituted a re-examination of their nuclear power policies and programmes. It has become evident that the only realistic way to introduce an advanced nuclear power programme in today's world is through international co-operation between countries. The sharing of expertise and technical facilities for the common development of the HTGR is the goal of the Member States comprising the IAEA's International Working Group on Gas Cooled Reactors. This meeting brought together key representatives and experts on the HTGR from the national organizations and industries of ten countries and the European Commission. The state electric utility of South Africa, Eskom, hosted this TCM in Johannesburg, from 13 to 15 November 1996. This TCM provided the opportunity to review the status of HTGR design and development activities, and especially to identify international co-operation which could be utilized to bring about the commercialization of the HTGR

  17. Nuclear energy supports sustainable development

    International Nuclear Information System (INIS)

    Koprda, V.

    2005-01-01

    The article is aimed at acceptability, compatibility and sustainability of nuclear energy as non-dispensable part of energy sources with vast innovation potential. The safety of nuclear energy , radioactive waste deposition, and prevention of risk from misuse of nuclear material have to be very seriously abjudged and solved. Nuclear energy is one of the ways how to decrease the contamination of atmosphere with carbon dioxide and it solves partially also the problem of global increase of temperature and climate changes. Given are the main factors responsible for the renaissance of nuclear energy. (author)

  18. Development of energy renovation packages for Danish residential single family houses - parcel houses

    DEFF Research Database (Denmark)

    Pomianowski, Michal Zbigniew; Antonov, Yovko Ivanov; Heiselberg, Per Kvols

    Work presented in this technical report was developed as a port of Horizon 2020 EU project REFURB. The number of deep energy retrofits is falling behind the EU ambitious targets. The REFURB project aims at finding technical and nontechnical solutions that would match demand and supply side of the...

  19. Development of Regulatory Technical Requirements for the Advanced Integral Type Research Reactor

    International Nuclear Information System (INIS)

    Jo, Jong Chull; Yune, Young Gill; Kim, Woong Sik; Kim, Hho Jung

    2004-01-01

    This paper presents the current status of the study on the development of regulatory technical requirements for the licensing review of an advanced integral type research reactor of which the license application is expected in a few years. According to the Atomic Energy Act of Korea, both research and education reactors are subject to the technical requirements for power reactors in the licensing review. But, some of the requirements may not be applicable or insufficient for the licensing reviews of reactors with unique design features. Thus it is necessary to identify which review topics or areas can not be addressed by the existing requirements and to develop the required ones newly or supplement appropriately. Through the study performed so far, it has been identified that the following requirements need to be developed newly for the licensing review of SMART-P: the use of proven technology, the interfacial facility, the non-safety systems, and the metallic fuels. The approach and basis for the development of each of the requirements are discussed. (authors)

  20. PROSPECTS OF ENERGY EFFICIENCY IMPROVEMENT AND DEVELOPMENT OF THE RENEWABLE ENERGY SOURCES IN PROVINCE OF VOJVODINA

    Energy Technology Data Exchange (ETDEWEB)

    Gvozdenac, D.; Ciric, R.; Tesic, M.

    2007-07-01

    The paper presents the outcome of the research in the field of energy efficiency improvement and development of the renewable energy sources in province of Vojvodina (Serbia). The summarized results of the paper are: - Potentials for energy efficiency improvement in Vojvodina, - Potentials for development of renewable energy sources in Vojvodina, - Proposal of measures of the energy policy for the promotion of research and development (R and D) which will use local scientific and technical potentials in the field of renewable energy sources and energy efficiency and improve the sustainability on the long run. - Proposal of measures for the energy policy in the domain of renewable energy sources development and energy efficiency and estimation of potentials for improvements by applying proposed measures in order to accomplish established tasks. - Synthesizing findings and proposals in the Action Plan of the Executive Council of the Autonomous Province of Vojvodina for the realization of the medium term program as well as the establishment of the monitoring plan for the assessment of program objectives progress. (auth)