WorldWideScience

Sample records for energy content

  1. Accuracy of Stated Energy Contents of Restaurant Foods

    Science.gov (United States)

    Urban, Lorien E.; McCrory, Megan A.; Dallal, Gerard E.; Das, Sai Krupa; Saltzman, Edward; Weber, Judith L.; Roberts, Susan B.

    2015-01-01

    Context National recommendations for the prevention and treatment of obesity emphasize reducing energy intake. Foods purchased in restaurants provide approximately 35% of the daily energy intake in US individuals but the accuracy of the energy contents listed for these foods is unknown. Objective To examine the accuracy of stated energy contents of foods purchased in restaurants. Design and Setting A validated bomb calorimetry technique was used to measure dietary energy in food from 42 restaurants, comprising 269 total food items and 242 unique foods. The restaurants and foods were randomly selected from quick-serve and sit-down restaurants in Massachusetts, Arkansas, and Indiana between January and June 2010. Main Outcome Measure The difference between restaurant-stated and laboratory-measured energy contents, which were corrected for standard metabolizable energy conversion factors. Results The absolute stated energy contents were not significantly different from the absolute measured energy contents overall (difference of 10 kcal/portion; 95% confidence interval [CI], −15 to 34 kcal/portion; P=.52); however, the stated energy contents of individual foods were variable relative to the measured energy contents. Of the 269 food items, 50 (19%) contained measured energy contents of at least 100 kcal/portion more than the stated energy contents. Of the 10% of foods with the highest excess energy in the initial sampling, 13 of 17 were available for a second sampling. In the first analysis, these foods contained average measured energy contents of 289 kcal/portion (95% CI, 186 to 392 kcal/portion) more than the stated energy contents; in the second analysis, these foods contained average measured energy contents of 258 kcal/portion (95% CI, 154 to 361 kcal/portion) more than the stated energy contents (Prestaurant foods were accurate overall. However, there was substantial inaccuracy for some individual foods, with understated energy contents for those with lower

  2. Chemical composition, true metabolisable energy content and ...

    African Journals Online (AJOL)

    The physical characteristics (thousand seed and hectolitre mass), chemical composition (dry matter, ash, crude protein (CP), ether extract, acid detergent fibre, neutral detergent fibre and mineral content), energy values (nitrogen corrected true metabolisable energy content (TMEn for roosters)) as well as the lysine and ...

  3. Energy content in manufacturing exports: A cross-country analysis

    International Nuclear Information System (INIS)

    Amador, João

    2012-01-01

    This article compares the energy content in manufacturing exports in a set of 30 advanced and emerging economies and examines its evolution from 1995 to 2005, combining information from the OECD input–output matrices and international trade data in 17 manufacturing sectors. In addition, the article suggests a methodology to disentangle export structure and sectoral energy efficiency effects, presenting results according to technological categories. The article concludes that Brazil, India and, mostly, China, present a high energy content in manufacturing exports, which has increased from 1995 to 2005. Conversely, many advanced economies, notably in Europe and North America, which showed energy contents below the world average in 1995, reinforced their position as exporters with relatively lower energy usage. The contribution of export structure and energy efficiency effects to explain differences in the energy content of exports draws attention to the situation of China. This country increased its relative energy usage in the exports of all technological categories of goods. This effect was reinforced by the stronger export specialization in high-tech products and hindered by a comparatively lower specialization in medium-high-tech products. - Highlights: ► We compare the energy content in manufacturing exports in advanced and emerging economies. ► We suggest a methodology to disentangle export structure and sectoral energy efficiency effects. ► Large emerging economies present high energy content in manufacturing exports. ► China increased its relative energy usage in the exports of all technological categories of goods.

  4. Caffeine Content in Popular Energy Drinks and Energy Shots.

    Science.gov (United States)

    Attipoe, Selasi; Leggit, Jeffrey; Deuster, Patricia A

    2016-09-01

    The use of energy beverages is high among the general population and military personnel. Previous studies have reported discrepancies between the actual amount of caffeine in products and the amount of caffeine on stated labels. Thus, the purpose of this study was to examine the content of caffeine listed on the labels of various energy drinks and energy shots. Top-selling energy drinks (n = 9) and energy shots (n = 5) were purchased from retail stores. Three of each of the 14 products were purchased and analyzed for caffeine content by an independent laboratory. Of the 14 products tested, 5 did not provide caffeine amounts on their facts panel-of those, 3 listed caffeine as an ingredient and 2 listed caffeine as part of a proprietary blend. The remaining 9 (of 14) products stated the amounts of caffeine on their labels, all of which were within 15% of the amount indicated on the label. In this study, although the energy beverages that indicated the amount of caffeine it contained had values within ±15% of the amount listed on the label, a potentially acceptable range, this finding is not acceptable with regard to current labeling regulations, which require added ingredients to total 100%. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  5. The energy content of restaurant foods without stated calorie information.

    Science.gov (United States)

    Urban, Lorien E; Lichtenstein, Alice H; Gary, Christine E; Fierstein, Jamie L; Equi, Ashley; Kussmaul, Carolyn; Dallal, Gerard E; Roberts, Susan B

    2013-07-22

    National recommendations for the prevention and treatment of obesity emphasize reducing energy intake through self-monitoring food consumption. However, little information is available on the energy content of foods offered by nonchain restaurants, which account for approximately 50% of restaurant locations in the United States. To measure the energy content of foods from independent and small-chain restaurants that do not provide stated information on energy content. We used bomb calorimetry to determine the dietary energy content of the 42 most frequently purchased meals from the 9 most common restaurant categories. Independent and small-chain restaurants were randomly selected, and 157 individual meals were analyzed. Area within 15 miles of downtown Boston. A random sample of independent and small-chain restaurants. Dietary energy. All meal categories provided excessive dietary energy. The mean energy content of individual meals was 1327 (95% CI, 1248-1406) kcal, equivalent to 66% of typical daily energy requirements. We found a significant effect of food category on meal energy (P ≤ .05), and 7.6% of meals provided more than 100% of typical daily energy requirements. Within-meal variability was large (average SD, 271 kcal), and we found no significant effect of restaurant establishment or size. In addition, meal energy content averaged 49% greater than those of popular meals from the largest national chain restaurants (P restaurants have been criticized for offering meals with excess dietary energy. This study finds that independent and small-chain restaurants, which provide no nutrition information, also provide excessive dietary energy in amounts apparently greater than popular meals from chain restaurants or information in national food databases. A national requirement for accurate calorie labeling in all restaurants may discourage menus offering unhealthy portions and would allow consumers to make informed choices about ordering meals that promote weight

  6. Effects of energy content and energy density of pre-portioned entrées on energy intake.

    Science.gov (United States)

    Blatt, Alexandria D; Williams, Rachel A; Roe, Liane S; Rolls, Barbara J

    2012-10-01

    Pre-portioned entrées are commonly consumed to help control portion size and limit energy intake. The influence of entrée characteristics on energy intake, however, has not been well studied. We determined how the effects of energy content and energy density (ED, kcal/g) of pre-portioned entrées combine to influence daily energy intake. In a crossover design, 68 non-dieting adults (28 men and 40 women) were provided with breakfast, lunch, and dinner on 1 day a week for 4 weeks. Each meal included a compulsory, manipulated pre-portioned entrée followed by a variety of unmanipulated discretionary foods that were consumed ad libitum. Across conditions, the entrées were varied in both energy content and ED between a standard level (100%) and a reduced level (64%). Results showed that in men, decreases in the energy content and ED of pre-portioned entrées acted independently and added together to reduce daily energy intake (both P kcal/day; P lunch, but at dinner and for the entire day the effects depended on the interaction of the two factors (P daily energy intake in women by 14% (289 ± 35 kcal/day; P daily energy intake and could influence the effectiveness of such foods for weight management.

  7. A Survey on Content Adaptation Systems towards Energy Consumption Awareness

    Directory of Open Access Journals (Sweden)

    Mohd Norasri Ismail

    2013-01-01

    Full Text Available The availability of heterogeneous devices has rapidly changed the way people access the World Wide Web that includes rich content applications such as video streaming, 3D games, video conferencing, and mobile TV. However, most of these devices' (i.e., mobile phone, PDA, smartphone, and tablet capabilities differ in terms of built-in software and library (what they can display, display size (how the content appears, and battery supply (how long the content can be displayed. In order for the digital contents to fit the target device, content adaptation is required. There have been many projects focused on energy-aware-based content adaptation that have been designed with different goals and approaches. This paper reviews some of the representative content adaptation solutions that have been proposed during the last few years, in relation to energy consumption focusing on wireless multimedia streaming in mobile devices. Also, this paper categorizes the research work according to different classifications of multimedia content adaptation requirements. In addition, we discuss some energy-related challenges content adaptation systems.

  8. Energy Content of U.S. Fast-Food Restaurant Offerings 14-Year Trends

    Science.gov (United States)

    Bauer, Katherine W.; Hearst, Mary O.; Earnest, Alicia A.; French, Simone A.; Oakes, J. Michael; Harnack, Lisa J.

    2012-01-01

    Background Within the past decade there has been increasing attention to the role of fast food in the American diet, including a rise in legislative and media-based efforts that address the healthfulness of fast food. However, no studies have been undertaken to evaluate changes in the energy content of fast-food chain restaurant menu items during this period. Purpose To examine changes in the energy content of lunch/dinner menu offerings at eight of the leading fast-food chain restaurants in the U.S. between 1997/1998 and 2009/2010. Methods Menu offerings and nutrient composition information were obtained from archival versions of the University of Minnesota Nutrition Coordinating Center Food and Nutrient Database. Nutrient composition information for items was updated biannually. Changes in median energy content of all lunch/dinner menu offerings and specific categories of menu items among all restaurants and for individual restaurants were examined. Data were collected between 1997 and 2010 and analysis was conducted in 2011. Results Spanning 1997/1998 and 2009/2010, the number of lunch/dinner menu items offered by the restaurants in the study increased by 53%. Across all menu items, the median energy content remained relatively stable over the study period. Examining specific food categories, the median energy content of desserts and condiments increased, the energy content of side items decreased, and energy content of entrees and drinks remained level. Conclusions While large increases in the number of menu items were observed, there have been few changes in the energy content of menu offerings at the leading fast-food chain restaurants examined in this study. PMID:23079171

  9. Energy content of U.S. fast-food restaurant offerings: 14-year trends.

    Science.gov (United States)

    Bauer, Katherine W; Hearst, Mary O; Earnest, Alicia A; French, Simone A; Oakes, J Michael; Harnack, Lisa J

    2012-11-01

    Within the past decade, there has been increasing attention to the role of fast food in the American diet, including a rise in legislative and media-based efforts that address the healthfulness of fast food. However, no studies have been undertaken to evaluate changes in the energy content of fast-food chain restaurant menu items during this period. To examine changes in the energy content of lunch/dinner menu offerings at eight of the leading fast-food chain restaurants in the U.S. between 1997-1998 and 2009-2010. Menu offerings and nutrient composition information were obtained from archival versions of the University of Minnesota Nutrition Coordinating Center Food and Nutrient Database. Nutrient composition information for items was updated biannually. Changes in median energy content of all lunch/dinner menu offerings and specific categories of menu items among all restaurants and for individual restaurants were examined. Data were collected between 1997 and 2010 and analysis was conducted in 2011. Spanning 1997-1998 and 2009-2010, the number of lunch/dinner menu items offered by the restaurants in the study increased by 53%. Across all menu items, the median energy content remained relatively stable over the study period. Examining specific food categories, the median energy content of desserts and condiments increased, the energy content of side items decreased, and energy content of entrées and drinks remained level. Although large increases in the number of menu items were observed, there have been few changes in the energy content of menu offerings at the leading fast-food chain restaurants examined in this study. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  10. Energy content estimation by collegians for portion standardized foods frequently consumed in Korea.

    Science.gov (United States)

    Kim, Jin; Lee, Hee Jung; Lee, Hyun Jung; Lee, Sun Ha; Yun, Jee-Young; Choi, Mi-Kyeong; Kim, Mi-Hyun

    2014-01-01

    The purpose of this study is to estimate Korean collegians' knowledge of energy content in the standard portion size of foods frequently consumed in Korea and to investigate the differences in knowledge between gender groups. A total of 600 collegians participated in this study. Participants' knowledge was assessed based on their estimation on the energy content of 30 selected food items with their actual-size photo images. Standard portion size of food was based on 2010 Korean Dietary Reference Intakes, and the percentage of participants who accurately estimated (that is, within 20% of the true value) the energy content of the standard portion size was calculated for each food item. The food for which the most participants provided the accurate estimation was ramyun (instant noodles) (67.7%), followed by cooked rice (57.8%). The proportion of students who overestimated the energy content was highest for vegetables (68.8%) and beverages (68.1%). The proportion of students who underestimated the energy content was highest for grains and starches (42.0%) and fruits (37.1%). Female students were more likely to check energy content of foods that they consumed than male students. From these results, it was concluded that the knowledge on food energy content was poor among collegians, with some gender difference. Therefore, in the future, nutrition education programs should give greater attention to improving knowledge on calorie content and to helping them apply this knowledge in order to develop effective dietary plans.

  11. Effects of oral exposure duration and gastric energy content on appetite ratings and energy intake in lean men

    NARCIS (Netherlands)

    Wijlens, Anne G.M.; Graaf, de Kees; Erkner, Alfrun; Mars, Monica

    2016-01-01

    Studies show that longer oral exposure to food leads to earlier satiation and lowers energy intake. Moreover, higher energy content of food has been shown to lead to higher satiety. Up to now, it has not been studied systematically how oral exposure duration and gastric energy content interact in

  12. Effects of energy content and energy density of pre-portioned entrées on energy intake

    OpenAIRE

    Blatt, Alexandria D.; Williams, Rachel A.; Roe, Liane S.; Rolls, Barbara J.

    2012-01-01

    Pre-portioned entrées are commonly consumed to help control portion size and limit energy intake. The influence of entrée characteristics on energy intake, however, has not been well studied. We determined how the effects of energy content and energy density (ED, kcal/g) of pre-portioned entrées combine to influence daily energy intake. In a crossover design, 68 non-dieting adults (28 men and 40 women) were provided with breakfast, lunch, and dinner on one day a week for four weeks. Each meal...

  13. Effect of cocoa fat content on wetting and surface energy of chocolate

    Directory of Open Access Journals (Sweden)

    Lubomír Lapčík

    2017-01-01

    Full Text Available The aim of this study was the quantification of the effect of the cocoa fat content on the wetting characteristics and surface free energy of different chocolate compositions. On the market, there are many different types of chocolate products which differ both in the sensory and physico-chemical properties together with their raw material compositions and the contents of the individual components. This paper focuses on differences in the use of different types of fats - cocoa butter, milk fat, equivalents or cocoa butter substitutes in chocolate products. Studied samples (prepared at Carla, Ltd. Company were followed by static contact angles of wetting measurements and by calculated surface free energies. There were investigated the effects of fat content and used fat types of the chocolate products on their final wettabilities and resulting surface free energies. There was found a linear dependence between total fat content and the surface free energy, which was gradually increasing with increasing fat content. Additionally, there were performed TG DTG and NIR spectrometry measurements of the tested materials with the aim to determine the melting point of studied fats used, as well as to determine and identify individual fat components of chocolate products which may affect the resulting value of surface free energy.

  14. Comparing the Energy Content of Batteries, Fuels, and Materials

    Science.gov (United States)

    Balsara, Nitash P.; Newman, John

    2013-01-01

    A methodology for calculating the theoretical and practical specific energies of rechargeable batteries, fuels, and materials is presented. The methodology enables comparison of the energy content of diverse systems such as the lithium-ion battery, hydrocarbons, and ammonia. The methodology is relevant for evaluating the possibility of using…

  15. Chemical composition, true metabolisable energy content and ...

    African Journals Online (AJOL)

    aneldavh

    116. Chemical composition, true metabolisable energy content and amino acid availability of grain legumes for poultry. T.S. Brand. 1, 2,3#. , D.A. Brandt. 1, 2,4 and C.W. ... alternatives (Wiseman, 1987; Brand et al., 1995). ..... The Ca, P and trace element concentrations for lupins, faba beans and peas recorded in the present.

  16. Energy drinks available in Ireland: a description of caffeine and sugar content.

    Science.gov (United States)

    Keaver, Laura; Gilpin, Susannah; Fernandes da Silva, Joana Caldeira; Buckley, Claire; Foley-Nolan, Cliodhna

    2017-06-01

    To describe the caffeine and sugar content of all energy drinks available on the island of Ireland. Two retail outlets were selected from each of: multinational, convenience and discount stores in Northern Ireland and the Republic of Ireland, and all available single-serve energy drinks were purchased. The cross-sectional survey was conducted in February 2015 and brand name, price, volume, caffeine and sugar content were recorded for each product. Descriptive analysis was performed. Seventy-eight products were identified on the island of Ireland (regular, n 59; diet/sugar-free/light, n 19). Caffeine and sugar content was in the range of 14-35 mg and 2·9-15·6 g per 100 ml, respectively. Mean caffeine content of 102·2 mg per serving represents 25·6 % of the maximum intake advised for adults by the European Food Safety Authority. Per serving, mean sugar content of regular energy drinks was 37 g. This exceeds WHO recommendations for maximum daily sugar intake of energy intake (25 g for adults consuming 8368 kJ (2000 kcal) diet). If displaying front-of-pack labelling, fifty-seven of the fifty-nine regular energy drinks would receive a Food Standards Agency 'red' colour-coded label for sugar. Energy drinks are freely available on the island of Ireland and all products surveyed can be defined as highly caffeinated products. This has potential health issues particularly for children and adolescents where safe limits of caffeine have not been determined. Energy drinks surveyed also contained high levels of sugar and could potentially contribute to weight gain and adverse dental health effects.

  17. Effect of Holder pasteurization and frozen storage on macronutrients and energy content of breast milk.

    Science.gov (United States)

    García-Lara, Nadia Raquel; Vieco, Diana Escuder; De la Cruz-Bértolo, Javier; Lora-Pablos, David; Velasco, Noelia Ureta; Pallás-Alonso, Carmen Rosa

    2013-09-01

    The aim of this study was to explore the effect of Holder pasteurization and frozen storage at -20°C after pasteurization on fat, total nitrogen, lactose, and energy content of breast milk. Both procedures are routinely practiced in human milk banks. A total of 34 samples of frozen breast milk, donated by 28 women, were collected. Once thawed, an aliquot of each sample was analyzed before pasteurization; the remaining milk was pasteurized (Holder method) and split into 8 aliquots. One aliquot was analyzed after pasteurization and the remainder frozen at -20°C and analyzed 30, 60, 90, 120, and 180 days later. For every aliquot, fat, total nitrogen, lactose, and energy content were determined using the device human Milk Analyzer. We observed a significant reduction in fat (3.5%; -0.17 (-0.29; -0.04) g/dL) and energy content (2.8%; -2.03 (-3.60; -0.46) g/dL) after pasteurization. A significant decrease over time was observed for fat, lactose and energy content. No significant changes were observed for nitrogen content. Mean differences between day 0 postpasteurization and day 180 were -0.13 (-0.21; -0.06) g/dL for fat, -0.08 (-0.13; -0.03) g/dL for lactose, and -1.55 (-2.38; -0.71) kcal/dL for energy content. The relative decreases were 2.8%, 1.7%, and 2.2%, respectively. Overall (postpasteurization + frozen storage), a 6.2% and 5% decrease were observed for fat and energy, respectively. Holder pasteurization decreased fat and energy content of human milk. Frozen storage at -20°C of pasteurized milk significantly reduced fat, lactose, and energy content of human milk.

  18. Energy-dispersive X-ray microanalysis of elements' content and ...

    African Journals Online (AJOL)

    This study was designed to investigate elements' content and anti-microbial effects of two Malaysian plants, Pereskia bleo and Goniothalamus umbrosus. Elements' analysis was carried out using Energy Dispersive X-ray Microanalysis combined with Variable Pressure Scanning Electron Microscope (EDX, VPSEM).

  19. Energy, nutrient and food content of snacks in French adults

    OpenAIRE

    Si Hassen, Wendy; Castetbon, Katia; Tichit, Christine; Péneau, Sandrine; Nechba, Anouar; Ducrot, Pauline; Lampuré, Aurélie; Bellisle, France; Hercberg, Serge; Méjean, Caroline

    2018-01-01

    BACKGROUND: Snacking raises concern since it may lead to an additional energy intake and poor nutrient quality. A snacking occasion can be defined as any eating occasion apart from main meals, regardless of the amount or type of foods consumed. We described the frequency of snacking occasions according to daily timing in French adults, and compared them between each other, and with the main meals, in terms of energy intake, energy and nutrient density, and food content. METHODS: This...

  20. Energy Efficient Caching in Backhaul-Aware Cellular Networks with Dynamic Content Popularity

    Directory of Open Access Journals (Sweden)

    Jiequ Ji

    2018-01-01

    Full Text Available Caching popular contents at base stations (BSs has been regarded as an effective approach to alleviate the backhaul load and to improve the quality of service. To meet the explosive data traffic demand and to save energy consumption, energy efficiency (EE has become an extremely important performance index for the 5th generation (5G cellular networks. In general, there are two ways for improving the EE for caching, that is, improving the cache-hit rate and optimizing the cache size. In this work, we investigate the energy efficient caching problem in backhaul-aware cellular networks jointly considering these two approaches. Note that most existing works are based on the assumption that the content catalog and popularity are static. However, in practice, content popularity is dynamic. To timely estimate the dynamic content popularity, we propose a method based on shot noise model (SNM. Then we propose a distributed caching policy to improve the cache-hit rate in such a dynamic environment. Furthermore, we analyze the tradeoff between energy efficiency and cache capacity for which an optimization is formulated. We prove its convexity and derive a closed-form optimal cache capacity for maximizing the EE. Simulation results validate the proposed scheme and show that EE can be improved with appropriate choice of cache capacity.

  1. Socioeconomic status, energy cost, and nutrient content of supermarket food purchases.

    Science.gov (United States)

    Appelhans, Bradley M; Milliron, Brandy-Joe; Woolf, Kathleen; Johnson, Tricia J; Pagoto, Sherry L; Schneider, Kristin L; Whited, Matthew C; Ventrelle, Jennifer C

    2012-04-01

    The relative affordability of energy-dense versus nutrient-rich foods may promote socioeconomic disparities in dietary quality and obesity. Although supermarkets are the largest food source in the American diet, the associations between SES and the cost and nutrient content of freely chosen food purchases have not been described. To investigate relationships of SES with the energy cost ($/1000 kcal) and nutrient content of freely chosen supermarket purchases. Supermarket shoppers (n=69) were recruited at a Phoenix AZ supermarket in 2009. The energy cost and nutrient content of participants' purchases were calculated from photographs of food packaging and nutrition labels using dietary analysis software. Data were analyzed in 2010-2011. Two SES indicators, education and household income as a percentage of the federal poverty guideline (FPG), were associated with the energy cost of purchased foods. Adjusting for covariates, the amount spent on 1000 kcal of food was $0.26 greater for every multiple of the FPG, and those with a baccalaureate or postbaccalaureate degree spent an additional $1.05 for every 1000 kcal of food compared to those with no college education. Lower energy cost was associated with higher total fat and less protein, dietary fiber, and vegetables per 1000 kcal purchased. Low-SES supermarket shoppers purchase calories in inexpensive forms that are higher in fat and less nutrient-rich. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  2. Energy and Nutrient Content of Food Served and Consumed by Nursing Home Residents.

    Science.gov (United States)

    Buckinx, F; Allepaerts, S; Paquot, N; Reginster, J Y; de Cock, C; Petermans, J; Bruyère, O

    2017-01-01

    The aim of this study was to compare energy and protein content of the served food with the actual intake from the food consumed by nursing home residents. This study also aimed to compare food intake and dietary allowances. This is a cross sectional study. This study was performed in nursing homes. Residents of these 2 nursing homes were eligible for the study if they agreed to participate and if they meet the selection criteria (to be older than 65 years and have a regular texture diet). Nutrient content of the served food and real food consumption was calculated for all meals during a 5-day period by precise weighting method. Difference between consumed and served dietary content was evaluated by the Chi² test. Seventy-four Belgian nursing home residents (75% of women, 85.8 ± 7.04 years on average) were included in this study. These subjects had a mean body mass index of 24.9 ± 4.83 kg/m². The mean energy content of the served food was 1783.3 ± 125.7 kcal per day. However, residents did not eat the whole of the meals and the actual energy content of the consumed food was significantly less (1552.4 ± 342.1 kcal per day; peating significantly more energy than the others (p=.04). Meals served in nursing homes are not entirely consumed by their residents. As expected, the energy consumed are lower in subjects considered as malnourished or at risk of malnutrition.

  3. Effects of Oral Exposure Duration and Gastric Energy Content on Appetite Ratings and Energy Intake in Lean Men

    Directory of Open Access Journals (Sweden)

    Anne G. M. Wijlens

    2016-01-01

    Full Text Available Studies show that longer oral exposure to food leads to earlier satiation and lowers energy intake. Moreover, higher energy content of food has been shown to lead to higher satiety. Up to now, it has not been studied systematically how oral exposure duration and gastric energy content interact in satiety regulation. Thirty-seven men (22 ± 4 years, 22 ± 2 kg/m2 participated in a randomized cross-over trial, in which we independently manipulated: (1 oral exposure duration by modified sham feeding (MSF for 1 or 8 min; and (2 energy content of gastric load (GL by a nasogastric tube: 100 kcal/500 mL or 700 kcal/500 mL. Outcome measures were appetite ratings and subsequent energy intake from an ad libitum meal. Energy intake was 35% lower after the GLs with 700 kcal than with 100kcal (p < 0.0001. All appetite ratings were lower in the 700 kcal than in the 100 kcal treatments (area under the curve (AUC; p-values ≤ 0.002; fullness was higher and prospective consumption was lower in the 8 min than in the 1 min MSF treatments (AUC; p-values ≤ 0.02. In conclusion, the current showed that a GL of 700 kcal/500 mL vs. 100 kcal/500 mL increased satiety and lowered energy intake. No additional effects of oral exposure duration could be observed, presumably due to the high contrast in energy between the manipulations. Future research should also focus on the role of oral exposure as such and not only the duration.

  4. Effects of Oral Exposure Duration and Gastric Energy Content on Appetite Ratings and Energy Intake in Lean Men.

    Science.gov (United States)

    Wijlens, Anne G M; de Graaf, Cees; Erkner, Alfrun; Mars, Monica

    2016-01-26

    Studies show that longer oral exposure to food leads to earlier satiation and lowers energy intake. Moreover, higher energy content of food has been shown to lead to higher satiety. Up to now, it has not been studied systematically how oral exposure duration and gastric energy content interact in satiety regulation. Thirty-seven men (22 ± 4 years, 22 ± 2 kg/m²) participated in a randomized cross-over trial, in which we independently manipulated: (1) oral exposure duration by modified sham feeding (MSF) for 1 or 8 min; and (2) energy content of gastric load (GL) by a nasogastric tube: 100 kcal/500 mL or 700 kcal/500 mL. Outcome measures were appetite ratings and subsequent energy intake from an ad libitum meal. Energy intake was 35% lower after the GLs with 700 kcal than with 100 kcal (p < 0.0001). All appetite ratings were lower in the 700 kcal than in the 100 kcal treatments (area under the curve (AUC); p-values ≤ 0.002); fullness was higher and prospective consumption was lower in the 8 min than in the 1 min MSF treatments (AUC; p-values ≤ 0.02). In conclusion, the current showed that a GL of 700 kcal/500 mL vs. 100 kcal/500 mL increased satiety and lowered energy intake. No additional effects of oral exposure duration could be observed, presumably due to the high contrast in energy between the manipulations. Future research should also focus on the role of oral exposure as such and not only the duration.

  5. Energy content of stormtime ring current from phase space mapping simulations

    International Nuclear Information System (INIS)

    Chen, M.W.; Schulz, M.; Lyons, L.R.

    1993-01-01

    The authors perform a model study to account for the increase in energy content of the trapped-particle population which occurs during the main phase of major geomagnetic storms. They consider stormtime particle transport in the equatorial region of the magnetosphere. They start with a phase space distribution of the ring current before the storm, created by a steady state transport model. They then use a previously developed guiding center particle simulation to map the stormtime ring current phase space, following Liouville's theorem. This model is able to account for the ten to twenty fold increase in energy content of magnetospheric ions during the storm

  6. Local differences in mineral content in vertebral trabecular bone measured by dual-energy computed tomography

    International Nuclear Information System (INIS)

    Nepper-Rasmussen, J.; Mosekilde, L.; Aarhus Univ.

    1989-01-01

    Twelve lumbar vertebral bodies from cadavers were examined with dual-energy CT, to measure the calcium content in a big central region of interest (ROI). In each of five vertebrae the calcium content was also measured in six small ROI. After completed scanning, six small cylinders were drilled out from each vertebra, and the ash-density of each cylinder was measured. The dual-energy CT measurements correlated well with the ash-density. Both ash-density and dual-energy CT showed a significantly higher mineral content in the posterior part of the vertebrae than in the anterior part, and this difference might be responsible for problems encountered with the reproducibility of dual-energy CT. (orig.)

  7. Bio-energy in China: Content analysis of news articles on Chinese professional internet platforms

    International Nuclear Information System (INIS)

    Qu Mei; Tahvanainen, Liisa; Ahponen, Pirkkoliisa; Pelkonen, Paavo

    2009-01-01

    The aim of this study is to discuss how information about the development and use of bio-energy is forwarded and disseminated to general public via the Internet in China. Furthermore, this study also explores in what manner the information of renewable energy policies is presented. A research method used in this study is an application of content analysis. Altogether 19 energy-related web platforms were found by searching keywords, such as 'energy net' or 'renewable energy net' or 'bio-energy net' on (www.Google.cn). A thorough analysis was conducted by focusing on one of them: (www.china5e.com). The news articles on (www.china5e.com) were examined according to whether the use of bio-energy was articulated positively or negatively in the contents of articles. It was also considered whether the articles were imported from abroad. The results of this study indicated that in China there is a tendency on the Internet to disseminate primarily the positive information about bio-energy with a great emphasis on its benefits. In addition, the study shows that when analyzing the content of the news articles, biogas and liquid bio-fuels will be the main bio-energy development trends in China in the near future.

  8. Bio-energy in China: Content analysis of news articles on Chinese professional internet platforms

    Energy Technology Data Exchange (ETDEWEB)

    Qu Mei [Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland); Northwest Agriculture and Forestry University, College of Forestry (China)], E-mail: qu@cc.joensuu.fi; Tahvanainen, Liisa [Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland); Ahponen, Pirkkoliisa [Faculty of Social Sciences and Regional Studies, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland); Pelkonen, Paavo [Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland)

    2009-06-15

    The aim of this study is to discuss how information about the development and use of bio-energy is forwarded and disseminated to general public via the Internet in China. Furthermore, this study also explores in what manner the information of renewable energy policies is presented. A research method used in this study is an application of content analysis. Altogether 19 energy-related web platforms were found by searching keywords, such as 'energy net' or 'renewable energy net' or 'bio-energy net' on (www.Google.cn). A thorough analysis was conducted by focusing on one of them: (www.china5e.com). The news articles on (www.china5e.com) were examined according to whether the use of bio-energy was articulated positively or negatively in the contents of articles. It was also considered whether the articles were imported from abroad. The results of this study indicated that in China there is a tendency on the Internet to disseminate primarily the positive information about bio-energy with a great emphasis on its benefits. In addition, the study shows that when analyzing the content of the news articles, biogas and liquid bio-fuels will be the main bio-energy development trends in China in the near future.

  9. Bio-energy in China. Content analysis of news articles on Chinese professional internet platforms

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Mei [Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland); Northwest Agriculture and Forestry University, College of Forestry (China); Tahvanainen, Liisa; Pelkonen, Paavo [Faculty of Forest Sciences, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland); Ahponen, Pirkkoliisa [Faculty of Social Sciences and Regional Studies, University of Joensuu, P.O. Box 111, FI-80101 Joensuu (Finland)

    2009-06-15

    The aim of this study is to discuss how information about the development and use of bio-energy is forwarded and disseminated to general public via the Internet in China. Furthermore, this study also explores in what manner the information of renewable energy policies is presented. A research method used in this study is an application of content analysis. Altogether 19 energy-related web platforms were found by searching keywords, such as 'energy net' or 'renewable energy net' or 'bio-energy net' on www.Google.cn. A thorough analysis was conducted by focusing on one of them: www.china5e.com. The news articles on www.china5e.com were examined according to whether the use of bio-energy was articulated positively or negatively in the contents of articles. It was also considered whether the articles were imported from abroad. The results of this study indicated that in China there is a tendency on the Internet to disseminate primarily the positive information about bio-energy with a great emphasis on its benefits. In addition, the study shows that when analyzing the content of the news articles, biogas and liquid bio-fuels will be the main bio-energy development trends in China in the near future. (author)

  10. Accuracy of stated energy contents of restaurant foods in a multi-site study

    Science.gov (United States)

    Context National recommendations for prevention and treatment of obesity emphasize reducing energy intake. Foods purchased in restaurants provide approximately 35% of daily energy intake, but the accuracy of information on the energy contents of these foods is unknown. Objective To examine the a...

  11. The digestible energy, metabolizable energy, and net energy content of dietary fat sources in thirteen- and fifty-kilogram pigs.

    Science.gov (United States)

    Kellner, T A; Patience, J F

    2017-09-01

    The objective was to determine the energy concentration of a diverse array of dietary fat sources and, from these data, develop regression equations that explain differences based on chemical composition. A total of 120 Genetiporc 6.0 × Genetiporc F25 (PIC, Inc., Hendersonville, TN) individually housed barrows were studied for 56 d. These barrows (initial BW of 9.9 ± 0.6 kg) were randomly allotted to 1 of 15 dietary treatments. Each experimental diet included 95% of a corn-soybean meal basal diet plus 5% either corn starch or 1 of 14 dietary fat sources. The 14 dietary fat sources (animal-vegetable blend, canola oil, choice white grease source A, choice white grease source B, coconut oil, corn oil source A, corn oil source B, fish oil, flaxseed oil, palm oil, poultry fat, soybean oil source A, soybean oil source B, and tallow) were selected to provide a diverse and robust range of unsaturated fatty acid:SFA ratios (U:S). Pigs were limit-fed experimental diets from d 0 to 10 and from d 46 to 56, providing a 7-d adaption for fecal collection on d 7 to 10 (13 kg BW) and d 53 to 56 (50 kg BW). At 13 kg BW, the average energy content of the 14 sources was 8.42 Mcal DE/kg, 8.26 Mcal ME/kg, and 7.27 Mcal NE/kg. At 50 kg BW, the average energy content was 8.45 Mcal DE/kg, 8.28 Mcal ME/kg, and 7.29 Mcal NE/kg. At 13 kg BW, the variation of dietary fat DE content was explained by DE (Mcal/kg) = 9.363 + [0.097 × (FFA, %)] - [0.016 × omega-6:omega-3 fatty acids ratio] - [1.240 × (arachidic acid, %)] - [5.054 × (insoluble impurities, %)] + [0.014 × (palmitic acid, %)] ( = 0.008, = 0.82). At 50 kg BW, the variation of dietary fat DE content was explained by DE (Mcal/kg) = 8.357 + [0.189 × U:S] - [0.195 × (FFA, %)] - [6.768 × (behenic acid, %)] + [0.024 × (PUFA, %)] ( = 0.002, = 0.81). In summary, the chemical composition of dietary fat explained a large degree of the variation observed in the energy content of dietary fat sources at both 13 and 50 kg BW.

  12. No effect of Zn-pollution on the energy content in the black garden ant.

    Science.gov (United States)

    Grześ, Irena M; Okrutniak, Mateusz

    2016-05-01

    Social insects may display a response to environmental pollution at the colony level. The key trait of an ant colony is to share energy between castes in order to maintain the existing adult population and to feed the brood. In the present study we calorimetrically measured the energy content per body mass (J/mg) of adults and pupae of workers, males and females of the black garden ant Lasius niger. The ants were sampled from 37 wild colonies originating from 19 sites located along the metal pollution gradient established in a post-mining area in Poland. The cost of metal detoxification seen as a possible reduction in energy content with increasing pollution was found neither for pupae nor adults. However, a considerable part of variance in energy content is explained by belonging to the same colony. These findings stress the importance of colony-specific factors and/or the interaction of these factors with specific site in shaping the response of ants to metal-pollution stress. Colony-related factors may constrain possible selfish decisions of workers over energy allocation in workers and sexual castes.

  13. Cooperative Content Distribution over Wireless Networks for Energy and Delay Minimization

    KAUST Repository

    Atat, Rachad

    2012-06-01

    Content distribution with mobile-to-mobile cooperation is studied. Data is sent to mobile terminals on a long range link then the terminals exchange the content using an appropriate short range wireless technology. Unicasting and multicasting are investigated, both on the long range and short range links. Energy minimization is formulated as an optimization problem for each scenario, and the optimal solutions are determined in closed form. Moreover, the schemes are applied in public safety vehicular networks, where Long Term Evolution (LTE) network is used for the long range link, while IEEE 802.11 p is considered for inter-vehicle collaboration on the short range links. Finally, relay-based multicasting is applied in high speed trains for energy and delay minimization. Results show that cooperative schemes outperform non-cooperative ones and other previous related work in terms of energy and delay savings. Furthermore, practical implementation aspects of the proposed methods are also discussed.

  14. Changes in brain amino acid content induced by hyposmolar stress and energy deprivation.

    Science.gov (United States)

    Haugstad, T S; Valø, E T; Langmoen, I A

    1995-12-01

    The changes in endogenous amino acids in brain extracellular and intracellular compartments evoked by hyposmotic stress and energy deprivation were compared. Tissue content and release of ten amino acids were measured simultaneously in rat hippocampal slices by means of high performance liquid chromatography. Hyposmotic stress induced a large release of taurine (25568 pmol mg-1 protein), and a smaller release of glutamate, accompanied by an inverse change in tissue content. Adding mannitol to correct osmolarity, blocked these changes. Energy deprivation caused an increase in the release of all amino acids except glutamine. The release was particularly large for glutamate and GABA (31141 and 13282 pmol mg-1, respectively). The intracellular concentrations were generally reduced, but the total amount of the released amino acids increased In contrast to the effect seen during hyposmolar stress, mannitol enhanced the changes due to energy deprivation. The results show that hyposmolar stress and energy deprivation cause different content and release profiles, suggesting that the mechanisms involved in the two situations are either different or modulated in different ways. The intracellular amino acid depletion seen during energy deprivation shows that increased outward transport is probably a primary event, and increased amino acid formation likely secondary to this release.

  15. Cooperative ad hoc networks for energy and delay efficient content distribution with fast channel variations

    KAUST Repository

    Atat, Rachad

    2012-11-20

    Cooperative ad hoc networks for the efficient distribution of content of common interest are studied in the case of fast channel variations. Mobiles are grouped into cooperative clusters for the purpose of receiving the content with optimized energy efficiency. Data are sent to mobile terminals on a long range (LR) link, and then, the terminals exchange the content by using an appropriate short range wireless technology. When channel state information is available for the LR links, unicasting is used on the LR. When accurate channel state information is not available, threshold-based multicasting is implemented on the LR. Energy minimization is formulated as an optimization problem for each scenario, and the optimal solutions are determined in closed form in scenarios with fast channel variations. Results show significant energy savings in the proposed schemes compared with the noncooperative case and other previous related work. Furthermore, the energy minimizing solutions are shown to lead to reduced delay in the content distribution process. Practical implementation aspects of the proposed methods are also discussed. © 2012 John Wiley & Sons, Ltd.

  16. Cooperative ad hoc networks for energy and delay efficient content distribution with fast channel variations

    KAUST Repository

    Atat, Rachad; Yaacoub, Elias E.; Alouini, Mohamed-Slim; Abu-Dayya, Adnan A.

    2012-01-01

    Cooperative ad hoc networks for the efficient distribution of content of common interest are studied in the case of fast channel variations. Mobiles are grouped into cooperative clusters for the purpose of receiving the content with optimized energy efficiency. Data are sent to mobile terminals on a long range (LR) link, and then, the terminals exchange the content by using an appropriate short range wireless technology. When channel state information is available for the LR links, unicasting is used on the LR. When accurate channel state information is not available, threshold-based multicasting is implemented on the LR. Energy minimization is formulated as an optimization problem for each scenario, and the optimal solutions are determined in closed form in scenarios with fast channel variations. Results show significant energy savings in the proposed schemes compared with the noncooperative case and other previous related work. Furthermore, the energy minimizing solutions are shown to lead to reduced delay in the content distribution process. Practical implementation aspects of the proposed methods are also discussed. © 2012 John Wiley & Sons, Ltd.

  17. Chemical features, cholesterol and energy content of table hen eggs ...

    African Journals Online (AJOL)

    Chemical features, cholesterol and energy content of table hen eggs from conventional and alternative farming systems. ... South African Journal of Animal Science ... This study was carried out to investigate the effect of conventional farming systems for laying hens (standard cage batteries) and new alternative systems ...

  18. Mineral composition and ash content of six major energy crops

    Energy Technology Data Exchange (ETDEWEB)

    Monti, Andrea; Venturi, Gianpietro [Department of Agroenvironmental Science and Technologies (DiSTA), University of Bologna, Viale G. Fanin, 44, 40127 Bologna (Italy); Di Virgilio, Nicola [Institute of Biometeorology, National Research Council, Via P. Gobetti, 101 I, 40129 Bologna (Italy)

    2008-03-15

    The chemical composition of biofuels has not received adequate attention given that it is an important aspect in the introduction of energy crops. In this study, the ash content and mineral composition (C, N, Al, Ca, Cl, Fe, K, Mg, Na, P, S, Si) of stems, leaves and reproductive organs of some promising energy crops were determined and compared with the respective recommended thresholds reported in literature. Overall, cynara exhibited the highest ash and mineral contents, which indicate high slagging, fouling and corrosion tendencies. However, cynara also showed the lowest Si content, both in leaves (4.3 g kg{sup -1}) and in stems (0.9 g kg{sup -1}). Sweet sorghum and giant reed exhibited the highest N content (up to 16 g kg{sup -1}), which greatly exceeded the recommended limits in leaves. Importantly, Cl always exceeded the recommended limits (up to 18 mg kg{sup -1} in cynara), both in stems and in leaves, thus resulting in a major stumbling block for all crops. Several significant correlations among elements were found at a single plant part; conversely these correlations were generally very weak considering different plant components, with the exception of K (r=0.91**), P (r=0.94**) and ashes (r=0.64**). Generally, leaves resulted in a significant deterioration of biofuel quality when compared with stems and flower heads. Therefore, agricultural strategies aimed at reducing the leaf component (e.g. by delaying the harvest) may considerably improve the suitability of biofuels for current combustion plants. (author)

  19. The composition, heating value and renewable share of the energy content of mixed municipal solid waste in Finland

    International Nuclear Information System (INIS)

    Horttanainen, M.; Teirasvuo, N.; Kapustina, V.; Hupponen, M.; Luoranen, M.

    2013-01-01

    Highlights: • New experimental data of mixed MSW properties in a Finnish case region. • The share of renewable energy of mixed MSW. • The results were compared with earlier international studies. • The average share of renewable energy was 30% and the average LHVar 19 MJ/kg. • Well operating source separation decreases the renewable energy content of MSW. - Abstract: For the estimation of greenhouse gas emissions from waste incineration it is essential to know the share of the renewable energy content of the combusted waste. The composition and heating value information is generally available, but the renewable energy share or heating values of different fractions of waste have rarely been determined. In this study, data from Finnish studies concerning the composition and energy content of mixed MSW were collected, new experimental data on the compositions, heating values and renewable share of energy were presented and the results were compared to the estimations concluded from earlier international studies. In the town of Lappeenranta in south-eastern Finland, the share of renewable energy ranged between 25% and 34% in the energy content tests implemented for two sample trucks. The heating values of the waste and fractions of plastic waste were high in the samples compared to the earlier studies in Finland. These high values were caused by good source separation and led to a low share of renewable energy content in the waste. The results showed that in mixed municipal solid waste the renewable share of the energy content can be significantly lower than the general assumptions (50–60%) when the source separation of organic waste, paper and cardboard is carried out successfully. The number of samples was however small for making extensive conclusions on the results concerning the heating values and renewable share of energy and additional research is needed for this purpose

  20. The composition, heating value and renewable share of the energy content of mixed municipal solid waste in Finland

    Energy Technology Data Exchange (ETDEWEB)

    Horttanainen, M., E-mail: mika.horttanainen@lut.fi; Teirasvuo, N.; Kapustina, V.; Hupponen, M.; Luoranen, M.

    2013-12-15

    Highlights: • New experimental data of mixed MSW properties in a Finnish case region. • The share of renewable energy of mixed MSW. • The results were compared with earlier international studies. • The average share of renewable energy was 30% and the average LHVar 19 MJ/kg. • Well operating source separation decreases the renewable energy content of MSW. - Abstract: For the estimation of greenhouse gas emissions from waste incineration it is essential to know the share of the renewable energy content of the combusted waste. The composition and heating value information is generally available, but the renewable energy share or heating values of different fractions of waste have rarely been determined. In this study, data from Finnish studies concerning the composition and energy content of mixed MSW were collected, new experimental data on the compositions, heating values and renewable share of energy were presented and the results were compared to the estimations concluded from earlier international studies. In the town of Lappeenranta in south-eastern Finland, the share of renewable energy ranged between 25% and 34% in the energy content tests implemented for two sample trucks. The heating values of the waste and fractions of plastic waste were high in the samples compared to the earlier studies in Finland. These high values were caused by good source separation and led to a low share of renewable energy content in the waste. The results showed that in mixed municipal solid waste the renewable share of the energy content can be significantly lower than the general assumptions (50–60%) when the source separation of organic waste, paper and cardboard is carried out successfully. The number of samples was however small for making extensive conclusions on the results concerning the heating values and renewable share of energy and additional research is needed for this purpose.

  1. Temporal trends in fast-food restaurant energy, sodium, saturated fat, and trans fat content, United States, 1996-2013.

    Science.gov (United States)

    Urban, Lorien E; Roberts, Susan B; Fierstein, Jamie L; Gary, Christine E; Lichtenstein, Alice H

    2014-12-31

    Excess intakes of energy, sodium, saturated fat, and trans fat are associated with increased risk for cardiometabolic syndrome. Trends in fast-food restaurant portion sizes can inform policy decisions. We examined the variability of popular food items in 3 fast-food restaurants in the United States by portion size during the past 18 years. Items from 3 national fast-food chains were selected: French fries, cheeseburgers, grilled chicken sandwich, and regular cola. Data on energy, sodium, saturated fat, and trans fat content were collated from 1996 through 2013 using an archival website. Time trends were assessed using simple linear regression models, using energy or a nutrient component as the dependent variable and the year as the independent variable. For most items, energy content per serving differed among chain restaurants for all menu items (P ≤ .04); energy content of 56% of items decreased (β range, -0.1 to -5.8 kcal) and the content of 44% increased (β range, 0.6-10.6 kcal). For sodium, the content of 18% of the items significantly decreased (β range, -4.1 to -24.0 mg) and the content for 33% increased (β range, 1.9-29.6 mg). Absolute differences were modest. The saturated and trans fat content, post-2009, was modest for French fries. In 2013, the energy content of a large-sized bundled meal (cheeseburger, French fries, and regular cola) represented 65% to 80% of a 2,000-calorie-per-day diet, and sodium content represented 63% to 91% of the 2,300-mg-per-day recommendation and 97% to 139% of the 1,500-mg-per-day recommendation. Findings suggest that efforts to promote reductions in energy, sodium, saturated fat, and trans fat intakes need to be shifted from emphasizing portion-size labels to additional factors such as total calories, frequency of eating, number of items ordered, menu choices, and energy-containing beverages.

  2. Methodologies on estimating the energy requirements for maintenance and determining the net energy contents of feed ingredients in swine: a review of recent work.

    Science.gov (United States)

    Li, Zhongchao; Liu, Hu; Li, Yakui; Lv, Zhiqian; Liu, Ling; Lai, Changhua; Wang, Junjun; Wang, Fenglai; Li, Defa; Zhang, Shuai

    2018-01-01

    In the past two decades, a considerable amount of research has focused on the determination of the digestible (DE) and metabolizable energy (ME) contents of feed ingredients fed to swine. Compared with the DE and ME systems, the net energy (NE) system is assumed to be the most accurate estimate of the energy actually available to the animal. However, published data pertaining to the measured NE content of ingredients fed to growing pigs are limited. Therefore, the Feed Data Group at the Ministry of Agricultural Feed Industry Centre (MAFIC) located at China Agricultural University has evaluated the NE content of many ingredients using indirect calorimetry. The present review summarizes the NE research works conducted at MAFIC and compares these results with those from other research groups on methodological aspect. These research projects mainly focus on estimating the energy requirements for maintenance and its impact on the determination, prediction, and validation of the NE content of several ingredients fed to swine. The estimation of maintenance energy is affected by methodology, growth stage, and previous feeding level. The fasting heat production method and the curvilinear regression method were used in MAFIC to estimate the NE requirement for maintenance. The NE contents of different feedstuffs were determined using indirect calorimetry through standard experimental procedure in MAFIC. Previously generated NE equations can also be used to predict NE in situations where calorimeters are not available. Although popular, the caloric efficiency is not a generally accepted method to validate the energy content of individual feedstuffs. In the future, more accurate and dynamic NE prediction equations aiming at specific ingredients should be established, and more practical validation approaches need to be developed.

  3. Non-destructive evaluation of the water content of concretes by low energy gamma backscattering

    International Nuclear Information System (INIS)

    Raghunath, V.M.; Bhatnagar, P.K.; Meenakshisundaram, V.

    1983-01-01

    A method of estimating the water content of various concretes mixed with neutron absorbers like boron or rare earths is described. This makes use of the fact that a large buildup of low energy photons in the 20 - 100 keV range is observed in the backscattered spectrum from water when compared to conrete. A 4.36 mCi 137 Cs (662 keV) source is used with a 1 mm thick NaI scintillator as the detector to measure the backscattered radiation in the energy range. Calibration curves for evaluating the water content in borated concretes, ordinary conretes of different thickness, and a mortar brick are reported. It has been possible to estimate the water content to within 0.25% (by weight) by this method. (orig.)

  4. Non-destructive evaluation of the water content of concretes by low energy gamma backscattering

    Energy Technology Data Exchange (ETDEWEB)

    Raghunath, V M; Bhatnagar, P K; Meenakshisundaram, V [Reactor Research Centre, Kalpakkam (India). Safety Research Lab.

    1983-02-15

    A method of estimating the water content of various concretes mixed with neutron absorbers like boron or rare earths is described. This makes use of the fact that a large buildup of low energy photons in the 20 - 100 keV range is observed in the backscattered spectrum from water when compared to concrete. A 4.36 mCi /sup 137/Cs (662 keV) source is used with a 1 mm thick NaI scintillator as the detector to measure the backscattered radiation in the energy range. Calibration curves for evaluating the water content in borated concretes, ordinary concretes of different thickness, and a mortar brick are reported. It has been possible to estimate the water content to within 0.25% (by weight) by this method.

  5. Materials development and field demonstration of high-recycled-content concrete for energy-efficient building construction; FINAL

    International Nuclear Information System (INIS)

    Ostowari, Ken; Nosson, Ali

    2000-01-01

    The project developed high-recycled-content concrete material with balanced structural and thermal attributes for use in energy-efficient building construction. Recycled plastics, tire, wool, steel and concrete were used as replacement for coarse aggregates in concrete and masonry production. With recycled materials the specific heat and thermal conductivity of concrete could be tailored to enhance the energy-efficiency of concrete buildings. A comprehensive field project was implemented which confirmed the benefits of high-recycled-content concrete for energy-efficient building construction

  6. Changes in energy content of Podisus maculiventris (Say (Hemiptera: Pentatomidae in response to different diets

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Ahsaei

    2014-12-01

    Full Text Available Nymphal instars and adults of the spined soldier bug, Podisus maculiventris, preferably feed on lepidopteran and colopteran larvae. Different prey diets can change fitness including energy reservoirs of the predator. In the present study, effects of different artificial and natural diets as well as starvation was studied on energy contents of the third and fourth nymphal instars of P. maculiventris. Total available energy calculated as the sum of the energy contents of lipids, carbohydrates, glycogen, and proteins did not significantly differ in the third and fourth nymphal instars fed on natural and artificial diets. Among the energy reservoirs, only total lipid storage of the starved nymphal instars was significantly different from that in the bugs fed on the natural diet. In conclusion, total energy reserves cannot be changed in response to artificial diet. A better understanding of the impact of artificial diets on the energy reserves of natural enemies can be considered as a biomarker for more appropriate mass rearing approaches of natural enemies.

  7. Energy, nutrient and food content of snacks in French adults.

    Science.gov (United States)

    Si Hassen, Wendy; Castetbon, Katia; Tichit, Christine; Péneau, Sandrine; Nechba, Anouar; Ducrot, Pauline; Lampuré, Aurélie; Bellisle, France; Hercberg, Serge; Méjean, Caroline

    2018-02-27

    Snacking raises concern since it may lead to an additional energy intake and poor nutrient quality. A snacking occasion can be defined as any eating occasion apart from main meals, regardless of the amount or type of foods consumed. We described the frequency of snacking occasions according to daily timing in French adults, and compared them between each other, and with the main meals, in terms of energy intake, energy and nutrient density, and food content. This cross-sectional analysis included 104,265 adults from the NutriNet-Santé cohort. Food intake was estimated using 24-h records of weekdays. For each eating occasion, nutrient density and energy content and density were computed. After weighting, 47.6% of our sample were men and mean age was 45.6 (15.3). Overall, 68% of participants ate at least one snack during the reported record, mainly in the morning or afternoon. Overall snack had a lower nutrient density [22.8 (SD = 278.3)] than main meals [25.8 (36.9) to 30.0 (30.4)]; but higher energy density [222.2 (163.3) kcal/100 g] than meals [133.9 (57.3) to 175.9 (99.6) kcal/100 g]. Morning snack was the snacking occasion with the lowest energy density [211 kcal/100 g], the lowest energy intake [104.1 kcal] and the highest nutrient density [60.1]. Afternoon and evening snacks had the highest energy loads [192.4 kcal and 207.6 kcal], but low nutrient scores [16 and 13, respectively]. The main food groups contributing to energy intake from snacks were fatty-sweet and sugary foods, fruit, hot beverages, and bread. Our findings highlight the frequency of snacking and the varying nutritional quality of snacks over the day. The morning snack was shown to be healthier than afternoon and evening snacks. This study was conducted according to guidelines laid down in the Declaration of Helsinki, and all procedures were approved by the Institutional Review Board of the French Institute for Health and Medical Research (IRB Inserm No. 0000388FWA00005831) and the

  8. Young people's awareness of energy problems - a contents analysis of students' essays

    International Nuclear Information System (INIS)

    Peters, H.P.

    1984-03-01

    A content analysis of 79 essays on energy topics written by students of 16 to 19 years was conducted to describe the representation of the energy problem in the mind of young people. Although energy conservation is highly appreciated most students associate the solution of the energy problem with an increase of the energy supply. On the long run they expect nuclear fusion and solar energy to be the most important energy sources. Fossile energies are discredited because of the limited ressources and environmental pollution. Even those students who accept the use of nuclear energy have an ambitious point of view because of the possible catastrophical consequences of nuclear accidents and the nuclear waste problem. Therefore they forecast the use of nuclear energy for only a limited time - until other technological options are developed. At last students have - regardless whether they are pro or contra nuclear energy - high expectations in technological progress. (orig.) [de

  9. Energy Contents of Frequently Ordered Restaurant Meals and Comparison with Human Energy Requirements and US Department of Agriculture Database Information: A Multisite Randomized Study

    Science.gov (United States)

    Urban, Lorien E.; Weber, Judith L.; Heyman, Melvin B.; Schichtl, Rachel L.; Verstraete, Sofia; Lowery, Nina S.; Das, Sai Krupa; Schleicher, Molly M.; Rogers, Gail; Economos, Christina; Masters, William A.; Roberts, Susan B.

    2017-01-01

    Background Excess energy intake from meals consumed away from home is implicated as a major contributor to obesity, and ~50% of US restaurants are individual or small-chain (non–chain) establishments that do not provide nutrition information. Objective To measure the energy content of frequently ordered meals in non–chain restaurants in three US locations, and compare with the energy content of meals from large-chain restaurants, energy requirements, and food database information. Design A multisite random-sampling protocol was used to measure the energy contents of the most frequently ordered meals from the most popular cuisines in non–chain restaurants, together with equivalent meals from large-chain restaurants. Setting Meals were obtained from restaurants in San Francisco, CA; Boston, MA; and Little Rock, AR, between 2011 and 2014. Main outcome measures Meal energy content determined by bomb calorimetry. Statistical analysis performed Regional and cuisine differences were assessed using a mixed model with restaurant nested within region×cuisine as the random factor. Paired t tests were used to evaluate differences between non–chain and chain meals, human energy requirements, and food database values. Results Meals from non–chain restaurants contained 1,205±465 kcal/meal, amounts that were not significantly different from equivalent meals from large-chain restaurants (+5.1%; P=0.41). There was a significant effect of cuisine on non–chain meal energy, and three of the four most popular cuisines (American, Italian, and Chinese) had the highest mean energy (1,495 kcal/meal). Ninety-two percent of meals exceeded typical energy requirements for a single eating occasion. Conclusions Non–chain restaurants lacking nutrition information serve amounts of energy that are typically far in excess of human energy requirements for single eating occasions, and are equivalent to amounts served by the large-chain restaurants that have previously been criticized

  10. Experimental determination of the empirical formula and energy content of unknown organics in waste streams

    Energy Technology Data Exchange (ETDEWEB)

    Shizas, I. [Univ. of Toronto, Dept. of Civil Engineering, Toronto, Ontario (Canada); Kosmatos, A. [Ontario Power Generation, Toronto, Ontario (Canada); Bagley, D.M. [Univ. of Toronto, Dept. of Civil Engineering, Toronto, Ontario (Canada)

    2002-06-15

    Two experimental methods are described in this paper: one for determining the empirical formula, and one for determining the energy content of unknown organics in waste streams. The empirical formula method requires volatile solids (VS), chemical oxygen demand (COD), total organic carbon (TOC), and total Kjeldahl nitrogen (TKN) to be measured for the waste; the formula can then be calculated from these values. To determine the energy content of the organic waste, bomb calorimetry was used with benzoic acid as a combustion aid. The results for standard compounds (glucose, propionic acid, L-arginine, and benzoic acid) were relatively good. The energy content measurement for wastewater and sludges had good reproducibility (i.e. 1.0 to 3.2% relative standard deviation for triplicate samples). Trouble encountered in the measurement of the empirical formulae of the waste samples was possibly due to difficulties with the TOC test; further analysis of this is required. (author)

  11. Experimental determination of the empirical formula and energy content of unknown organics in waste streams

    International Nuclear Information System (INIS)

    Shizas, I.; Kosmatos, A.; Bagley, D.M.

    2002-01-01

    Two experimental methods are described in this paper: one for determining the empirical formula, and one for determining the energy content of unknown organics in waste streams. The empirical formula method requires volatile solids (VS), chemical oxygen demand (COD), total organic carbon (TOC), and total Kjeldahl nitrogen (TKN) to be measured for the waste; the formula can then be calculated from these values. To determine the energy content of the organic waste, bomb calorimetry was used with benzoic acid as a combustion aid. The results for standard compounds (glucose, propionic acid, L-arginine, and benzoic acid) were relatively good. The energy content measurement for wastewater and sludges had good reproducibility (i.e. 1.0 to 3.2% relative standard deviation for triplicate samples). Trouble encountered in the measurement of the empirical formulae of the waste samples was possibly due to difficulties with the TOC test; further analysis of this is required. (author)

  12. The evolution of ring current ion energy density and energy content during geomagnetic storms based on Van Allen Probes measurements

    International Nuclear Information System (INIS)

    Zhao, H.; University of Colorado, Boulder, CO; Li, X.; University of Colorado, Boulder, CO; Baker, D. N.

    2015-01-01

    Enabled by the comprehensive measurements from the Magnetic Electron Ion Spectrometer (MagEIS), Helium Oxygen Proton Electron mass spectrometer (HOPE), and Radiation Belt Storm Probes Ion Composition Experiment (RBSPICE) instruments onboard Van Allen Probes in the heart of the radiation belt, the relative contributions of ions with different energies and species to the ring current energy density and their dependence on the phases of geomagnetic storms are quantified. The results show that lower energy (<50 keV) protons enhance much more often and also decay much faster than higher-energy protons. During the storm main phase, ions with energies <50 keV contribute more significantly to the ring current than those with higher energies; while the higher-energy protons dominate during the recovery phase and quiet times. The enhancements of higher-energy proton fluxes as well as energy content generally occur later than those of lower energy protons, which could be due to the inward radial diffusion. For the 29 March 2013 storm we investigated in detail that the contribution from O + is ~25% of the ring current energy content during the main phase and the majority of that comes from <50 keV O + . This indicates that even during moderate geomagnetic storms the ionosphere is still an important contributor to the ring current ions. Using the Dessler-Parker-Sckopke relation, the contributions of ring current particles to the magnetic field depression during this geomagnetic storm are also calculated. In conclusion, the results show that the measured ring current ions contribute about half of the Dst depression.

  13. Macronutrients and energy content of oral hospital diet prescribed to chronic kidney disease patients on conservative treatment.

    Science.gov (United States)

    David Silva, Janiara; Louvera Silva, Karine A; Baggio, Sueli R; Morgano, Marcelo A; Aguiar Nemer, Aline S; Quintaes, Késia D

    2014-11-01

    The contribution of diet and treatment planning in the treatment of Chronic Kidney Disease (CKD) has been recognized as having a significant clinical impact if introduced early. determine the levels of carbohydrates, proteins, lipids, energy and energy density (ED) in an oral hospital diet prescribed to CKD patients, and to evaluate the adequacy of this diet with respect to dietary recommendations. Diets were collected in a Brazilian public hospital on two non-consecutive days of six different weeks. The carbohydrate, protein, and lipid (total, saturated, monounsaturated, polyunsaturated, linoleic, linolenic and trans fatty acids) contents were determined in a laboratory. The amount of energy and the ED of the diets were calculated using the correction factor Atware and by dividing the total energy of the diet by weight, respectively. About 14.3% of the diets produced for patients with CKD were analyzed. The average density of the diets was low (0.7 kcal/g). In terms of nutritional adequacy, the average lipid content (15%) and linolenic fatty acid content (0.4%) were below the recommendation, as was energy (23.4 kcal / kg / day). The average carbohydrate content (63.5%) and protein content (1.0 g/kg/day) exceeded the recommendations levels. The oral hospital diet prepared for patients with CKD were considered unbalanced, and an unfavorable clinical treatment for these patients. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  14. Measuring the internal energy content of molecules transported across the liquid-gas interface

    International Nuclear Information System (INIS)

    Maselli, Olivia J; Gascooke, Jason R; Buntine, Mark A; Lawrance, Warren D

    2009-01-01

    Many details concerning the mechanism associated with the liberation of molecules from a liquid surface remain to be elucidated. We use the liquid microjet technique coupled with laser spectroscopy to measure the rotational and vibrational energy content of benzene spontaneously evaporating from a water-ethanol solution. These measurements provide molecular level insight into the mass and energy transfer processes associated with evaporation.

  15. Measuring the internal energy content of molecules transported across the liquid-gas interface

    Energy Technology Data Exchange (ETDEWEB)

    Maselli, Olivia J; Gascooke, Jason R; Buntine, Mark A [School of Chemistry and Physics, University of Adelaide, SA 5005 (Australia); Lawrance, Warren D, E-mail: m.buntine@curtin.edu.a [School of Chemistry, Physics and Earth Sciences, Flinders University, GPO Box 2100, Adelaide SA 5000 (Australia)

    2009-09-01

    Many details concerning the mechanism associated with the liberation of molecules from a liquid surface remain to be elucidated. We use the liquid microjet technique coupled with laser spectroscopy to measure the rotational and vibrational energy content of benzene spontaneously evaporating from a water-ethanol solution. These measurements provide molecular level insight into the mass and energy transfer processes associated with evaporation.

  16. Ripening influences banana and plantain peels composition and energy content.

    Science.gov (United States)

    Emaga, Thomas Happi; Bindelle, Jérôme; Agneesens, Richard; Buldgen, André; Wathelet, Bernard; Paquot, Michel

    2011-01-01

    Musa sp. peels are widely used by smallholders as complementary feeds for cattle in the tropics. A study of the influence of the variety and the maturation stage of the fruit on fermentability and metabolisable energy (ME) content of the peels was performed using banana (Yangambi Km5) and plantain (Big Ebanga) peels at three stages of maturation in an in vitro model of the rumen. Peel samples were analysed for starch, free sugars and fibre composition. Samples were incubated in the presence of rumen fluid. Kinetics of gas production were modelled, ME content was calculated using prediction equation and short-chain fatty acids production and molar ratio were measured after 72 h of fermentation. Final gas production was higher in plantain (269-339 ml g(-1)) compared to banana (237-328 ml g(-1)) and plantain exhibited higher ME contents (8.9-9.7 MJ/kg of dry matter, DM) compared to banana (7.7-8.8 MJ/kg of DM). Butyrate molar ratio decreased with maturity of the peels. The main influence of the variety and the stage of maturation on all fermentation parameters as well as ME contents of the peels was correlated to changes in the carbohydrate fraction of the peels, including starch and fibre.

  17. Proposal for determining the energy content of gravitational waves by using approximate symmetries of differential equations

    International Nuclear Information System (INIS)

    Hussain, Ibrar; Qadir, Asghar; Mahomed, F. M.

    2009-01-01

    Since gravitational wave spacetimes are time-varying vacuum solutions of Einstein's field equations, there is no unambiguous means to define their energy content. However, Weber and Wheeler had demonstrated that they do impart energy to test particles. There have been various proposals to define the energy content, but they have not met with great success. Here we propose a definition using 'slightly broken' Noether symmetries. We check whether this definition is physically acceptable. The procedure adopted is to appeal to 'approximate symmetries' as defined in Lie analysis and use them in the limit of the exact symmetry holding. A problem is noted with the use of the proposal for plane-fronted gravitational waves. To attain a better understanding of the implications of this proposal we also use an artificially constructed time-varying nonvacuum metric and evaluate its Weyl and stress-energy tensors so as to obtain the gravitational and matter components separately and compare them with the energy content obtained by our proposal. The procedure is also used for cylindrical gravitational wave solutions. The usefulness of the definition is demonstrated by the fact that it leads to a result on whether gravitational waves suffer self-damping.

  18. Increasing the protein content of meals and its effect on daily energy intake.

    Science.gov (United States)

    Blatt, Alexandria D; Roe, Liane S; Rolls, Barbara J

    2011-02-01

    High-protein preloads have been shown to enhance satiety, but little is known about the satiating effects of protein in more typical situations when meals are consumed ad libitum. To investigate the effects of protein in amounts commonly consumed over a day, a crossover study was conducted in 2008. In this experiment, 18 normal-weight women consumed ad libitum lunch and dinner entrées 1 day a week that were covertly varied in protein content (10%, 15%, 20%, 25%, or 30% energy). Entrées were manipulated by substituting animal protein for starchy ingredients and were matched for energy density, fat content, palatability, and appearance. Unmanipulated breakfasts and evening snacks were consumed ad libitum. Participants rated their hunger and fullness before and after meals as well as the taste and appearance of entrées. Data were analyzed using a mixed linear model. Results showed that mean 24-hour protein intake increased significantly across conditions, from 44±2 g/day in the 10% protein condition to 82±6 g/day in the 30% condition. Daily energy intake did not differ significantly across the 10% to 30% protein conditions (means 1,870±93, 1,887±93, 1,848±111, 1,876±100, and 1,807±98 kcal in the 10%, 15%, 20%, 25%, and 30% energy groups, respectively). There were no significant differences in hunger and fullness ratings across conditions or in taste and appearance ratings of the manipulated entrées. This study showed that varying the protein content of several entrées consumed ad libitum did not differentially influence daily energy intake or affect ratings of satiety. Copyright © 2011 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

  19. Wave propagation of spectral energy content in a granular chain

    Directory of Open Access Journals (Sweden)

    Shrivastava Rohit Kumar

    2017-01-01

    Full Text Available A mechanical wave is propagation of vibration with transfer of energy and momentum. Understanding the spectral energy characteristics of a propagating wave through disordered granular media can assist in understanding the overall properties of wave propagation through inhomogeneous materials like soil. The study of these properties is aimed at modeling wave propagation for oil, mineral or gas exploration (seismic prospecting or non-destructive testing of the internal structure of solids. The focus is on the total energy content of a pulse propagating through an idealized one-dimensional discrete particle system like a mass disordered granular chain, which allows understanding the energy attenuation due to disorder since it isolates the longitudinal P-wave from shear or rotational modes. It is observed from the signal that stronger disorder leads to faster attenuation of the signal. An ordered granular chain exhibits ballistic propagation of energy whereas, a disordered granular chain exhibits more diffusive like propagation, which eventually becomes localized at long time periods. For obtaining mean-field macroscopic/continuum properties, ensemble averaging has been used, however, such an ensemble averaged spectral energy response does not resolve multiple scattering, leading to loss of information, indicating the need for a different framework for micro-macro averaging.

  20. The correlationship between the metabolizable energy content, chemical composition and color score in different sources of corn DDGS.

    Science.gov (United States)

    Jie, Yong-Z; Zhang, Jian-Y; Zhao, Li-H; Ma, Qiu-G; Ji, Cheng

    2013-09-25

    This study was conducted to evaluate the apparent metabolizable energy (AME) and true metabolizable energy (TME) contents in 30 sources of corn distillers dried grains with solubles (DDGS) in adult roosters, and establish the prediction equations to estimate the AME and TME value based on its chemical composition and color score. Twenty-eight sources of corn DDGS made from several processing plants in 11 provinces of China and others imported from the United States. DDGS were analyzed for their metabolizable energy (ME) contents, measured for color score and chemical composition (crude protein, crude fat, ash, neutral detergent fiber, acid detergent fiber), to predict the equation of ME in DDGS. A precision-fed rooster assay was used, each DDGS sample was tube fed (50 g) to adult roosters. The experiment was conducted as a randomized incomplete block design with 3 periods. Ninety-five adult roosters were used in each period, with 90 being fed the DDGS samples and 5 being fasted to estimate basal endogenous energy losses. Results showed that the AME ranged from 5.93 to 12.19 MJ/kg, TME ranged from 7.28 to 13.54 MJ/kg. Correlations were found between ME and ash content (-0.64, P sources energy digestibility and metabolizable energy content.

  1. Local Content Requirements in Renewable Energy Schemes - Government Procurement or a Violation of International Obligations?

    NARCIS (Netherlands)

    Verburg, Cornelis

    2017-01-01

    Numerous States have adopted renewable energy schemes aimed at incentivising investments in renewable energy generation capacity that contain local content requirements as an eligibility criterion to obtain support, such as a feed-in tariff. However, these requirements may violate the international

  2. Energy Contents of Frequently Ordered Restaurant Meals and Comparison with Human Energy Requirements and U.S. Department of Agriculture Database Information: A Multisite Randomized Study.

    Science.gov (United States)

    Urban, Lorien E; Weber, Judith L; Heyman, Melvin B; Schichtl, Rachel L; Verstraete, Sofia; Lowery, Nina S; Das, Sai Krupa; Schleicher, Molly M; Rogers, Gail; Economos, Christina; Masters, William A; Roberts, Susan B

    2016-04-01

    Excess energy intake from meals consumed away from home is implicated as a major contributor to obesity, and ∼50% of US restaurants are individual or small-chain (non-chain) establishments that do not provide nutrition information. To measure the energy content of frequently ordered meals in non-chain restaurants in three US locations, and compare with the energy content of meals from large-chain restaurants, energy requirements, and food database information. A multisite random-sampling protocol was used to measure the energy contents of the most frequently ordered meals from the most popular cuisines in non-chain restaurants, together with equivalent meals from large-chain restaurants. Meals were obtained from restaurants in San Francisco, CA; Boston, MA; and Little Rock, AR, between 2011 and 2014. Meal energy content determined by bomb calorimetry. Regional and cuisine differences were assessed using a mixed model with restaurant nested within region×cuisine as the random factor. Paired t tests were used to evaluate differences between non-chain and chain meals, human energy requirements, and food database values. Meals from non-chain restaurants contained 1,205±465 kcal/meal, amounts that were not significantly different from equivalent meals from large-chain restaurants (+5.1%; P=0.41). There was a significant effect of cuisine on non-chain meal energy, and three of the four most popular cuisines (American, Italian, and Chinese) had the highest mean energy (1,495 kcal/meal). Ninety-two percent of meals exceeded typical energy requirements for a single eating occasion. Non-chain restaurants lacking nutrition information serve amounts of energy that are typically far in excess of human energy requirements for single eating occasions, and are equivalent to amounts served by the large-chain restaurants that have previously been criticized for providing excess energy. Restaurants in general, rather than specific categories of restaurant, expose patrons to

  3. Observations and simulations of the seasonal evolution of snowpack cold content and its relation to snowmelt and the snowpack energy budget

    Science.gov (United States)

    Jennings, Keith S.; Kittel, Timothy G. F.; Molotch, Noah P.

    2018-05-01

    Cold content is a measure of a snowpack's energy deficit and is a linear function of snowpack mass and temperature. Positive energy fluxes into a snowpack must first satisfy the remaining energy deficit before snowmelt runoff begins, making cold content a key component of the snowpack energy budget. Nevertheless, uncertainty surrounds cold content development and its relationship to snowmelt, likely because of a lack of direct observations. This work clarifies the controls exerted by air temperature, precipitation, and negative energy fluxes on cold content development and quantifies the relationship between cold content and snowmelt timing and rate at daily to seasonal timescales. The analysis presented herein leverages a unique long-term snow pit record along with validated output from the SNOWPACK model forced with 23 water years (1991-2013) of quality controlled, infilled hourly meteorological data from an alpine and subalpine site in the Colorado Rocky Mountains. The results indicated that precipitation exerted the primary control on cold content development at our two sites with snowfall responsible for 84.4 and 73.0 % of simulated daily gains in the alpine and subalpine, respectively. A negative surface energy balance - primarily driven by sublimation and longwave radiation emission from the snowpack - during days without snowfall provided a secondary pathway for cold content development, and was responsible for the remaining 15.6 and 27.0 % of cold content additions. Non-zero cold content values were associated with reduced snowmelt rates and delayed snowmelt onset at daily to sub-seasonal timescales, while peak cold content magnitude had no significant relationship to seasonal snowmelt timing. These results suggest that the information provided by cold content observations and/or simulations is most relevant to snowmelt processes at shorter timescales, and may help water resource managers to better predict melt onset and rate.

  4. Quantitative modeling of the Water Footprint and Energy Content of Crop and Animal Products Consumption in Tanzania

    Directory of Open Access Journals (Sweden)

    felichesmi Selestine lyakurwa

    2014-05-01

    Full Text Available A comprehensive understanding of the link between water footprint and energy content of crop and animal products is vitally important for the sound management of water resources. In this study, we developed a mathematical relationship between water content, and energy content of many crops and animal products by using an improved LCA approach (water footprint. The standard values of the water and energy contents of crops and animal products were obtained from the databases of Agricultural Research Service, UNESCO Institute for water education and Food, and Agriculture Organization of the United Nations. The water footprint approach was applied to analyze the relationship between water requirement and energy of content of crop and animal products, in which the uncertainty and sensitivity was evaluated by Monte Carlo simulation technique that is contained in the Oracle Crystal Ball Fusion Edition v11.1.1.3.00. The results revealed significant water saving due to changes in food consumption pattern i.e. from consumption of more meat to vegetables. The production of 1kcal of crop and animal products requires about 98% of green, 4.8% blue water and 0.4% of gray water. In which changes in consumption pattern gave annual blue water saving of about 1605 Mm3 that is equivalent to 41.30m3/capita, extremely greater than the standard drinking water requirement for the whole population. Moreover, the projected results indicated, triple increase of dietary water requirement from 30.9 Mm3 in 2005 to 108 Mm3 by 2050. It was also inferred that, Tanzania has a positive virtual water balance of crop and animal products consumption with net virtual water import of 9.1 Mm3 that is the contribution margin to the water scarcity alleviation strategy. Therefore, developed relationship of water footprint and energy content of crops and animal products can be used by water resource experts for sustainable freshwater and food supply.

  5. Major losses of fat, carbohydrates and energy content of preterm human milk frozen at -80°C.

    Science.gov (United States)

    Lev, H M; Ovental, A; Mandel, D; Mimouni, F B; Marom, R; Lubetzky, R

    2014-05-01

    Long-term storage of human milk (HM) requires freezing at low temperatures, the consequences of which upon macronutrients are unclear. To test the null hypothesis that HM freezing and storage for a range of 1 to 10 weeks at -80 °C does not affect HM fat, protein, lactose and energy contents. Samples of HM were obtained from 20 mothers (60 samples) of preterm infants (25 to 35 weeks gestation), who routinely expressed their milk, every 3 h, using an electric pump, from the second to the seventh week after delivery. All samples were frozen at -80 °C for 8 to 83 days (43.8 days average). After thawing and homogenization, energy and macronutrient contents were measured using an HM analyzer. Fat, carbohydrates and energy contents were significantly lower in thawed HM than in fresh HM (fat, fresh vs thawed: 3.72±1.17 vs 3.36±1.19 g/100 ml, Pcarbohydrates, fresh vs thawed: 5.86±0.71 vs 4.09±0.96 g/100 ml, Pvs thawed: 64.93±12.97 vs 56.63±16.82 kcal/100 ml, Pvs thawed: 1.14±0.36 vs 1.15±0.37 g/100 ml, P=0.7). The decline in carbohydrates content but not in fat and energy correlated significantly with freezing duration. Freezing at -80 °C significantly decreases the energy content of HM, both from fat and carbohydrates. Since quantitatively the decrease in macronutrients was much higher than that published for HM storage at -20 °C, our results do not support freezing HM at -80 °C as the gold standard for long-term storage. We suggest that caloric intake calculations in preterm infants cannot be established based upon fresh HM data.

  6. Characterisation of chemical composition and energy content of green waste and municipal solid waste from Greater Brisbane, Australia.

    Science.gov (United States)

    Hla, San Shwe; Roberts, Daniel

    2015-07-01

    The development and deployment of thermochemical waste-to-energy systems requires an understanding of the fundamental characteristics of waste streams. Despite Australia's growing interest in gasification of waste streams, no data are available on their thermochemical properties. This work presents, for the first time, a characterisation of green waste and municipal solid waste in terms of chemistry and energy content. The study took place in Brisbane, the capital city of Queensland. The municipal solid waste was hand-sorted and classified into ten groups, including non-combustibles. The chemical properties of the combustible portion of municipal solid waste were measured directly and compared with calculations made based on their weight ratios in the overall municipal solid waste. The results obtained from both methods were in good agreement. The moisture content of green waste ranged from 29% to 46%. This variability - and the tendency for soil material to contaminate the samples - was the main contributor to the variation of samples' energy content, which ranged between 7.8 and 10.7MJ/kg. The total moisture content of food wastes and garden wastes was as high as 70% and 60%, respectively, while the total moisture content of non-packaging plastics was as low as 2.2%. The overall energy content (lower heating value on a wet basis, LHVwb) of the municipal solid waste was 7.9MJ/kg, which is well above the World Bank-recommended value for utilisation in thermochemical conversion processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Difference in reproduction energy content in muscles on fish from reservoirs in Paraná State, Brazil

    Directory of Open Access Journals (Sweden)

    Luis Alberto Espínola

    Full Text Available The variation in energy in the muscles of the most representative fish species from three Neotropical Reservoirs was investigated to determine the effect of the reproductive process on the amount of energy allocated and a possible relationship between the general welfare of the species and their caloric content. Significant differences were detected between the sexes and among the stages of gonad maturity. In general, the variation in energy in the muscles indicate to be a function of the reproductive cycle. In most examined species, females presented the highest caloric values, reflecting physiological differences in their use of energy, relative to the reproductive process. However, there was no significant correlation between caloric values and the condition factor of any species. Significant differences in the caloric content and condition factor were identified in each species belonging different trophic groups, indicating an effect of food quality on the amount of energy stored in the muscles. We conclude that the analyzed species presented a similar pattern of variation in energy, but that this was not reflected in their condition. In addition, an effect of reproduction and feeding habit on energy allocation was observed in both sexes.

  8. Measuring the incombustible content of mine dust using backscatter of low energy gamma rays

    International Nuclear Information System (INIS)

    Stewart, R.F.; Martin, J.W.

    1970-01-01

    Low energy gamma radiation directionally applied in a method, and by an adjustable apparatus to a layer of mine dust produces scattered gammas whose reflected radiation detected at a predetermined distance from the mine dust acts to cause the generation of an electrical control input for a meter indicating the incombustible content of the mine dust substantially independently of the effects on such indicating which are normally due to its bulk density and any moisture content thereof. (U.S.)

  9. Evaluation of various feedstuffs of ruminants in terms of chemical composition and metabolisable energy content

    Directory of Open Access Journals (Sweden)

    Dinesh Kumar

    2015-05-01

    Full Text Available Aim: The aim was to determine the chemical composition and metabolisable energy (ME content of feedstuffs used in ruminant animals using in vitro method. Materials and Methods: A total of 18 feedstuffs used for ruminant feeding including cultivated non-leguminous fodders like maize, sorghum, pearl millet, and oat; leguminous fodders like cowpea and berseem; agro-industrial by-products such as wheat bran, deoiled rice bran, rice polish, wheat straw, and concentrates such as mustard oil cake, groundnut cake, soybean meal, cotton seed cake, grains like maize, oat, wheat, and barley were taken for this study. Chemical compositions and cell wall constituents of test feeds were determined in triplicate. The crude protein (CP content was calculated as nitrogen (N × 6.25. True dry matter digestibility (TDMD, true organic matter digestibility (TOMD, ME, and partitioning factor (PF values were determined by in vitro gas production technique (IVGPT. Results: The CP content of non-leguminous fodders varied from 7.29% (sorghum to 9.51% (maize, but leguminous fodders had less variation in CP. Oilseed cakes/meals had high CP and ether extract (EE content than other feedstuffs except rice polish, which had 12.80% EE. Wheat straw contained highest fiber fractions than the other ingredients. ME content was highest in grains (wheat-12.02 MJ/kg and lowest in wheat straw (4.65 MJ/kg and other roughages. TDMD of grains and oilseed cakes/meals were higher than the fodders and agro-industrial by-products. The same trend was observed for TOMD. Conclusions: It was concluded that the energy feeds showed a great variation in chemical composition and ME content. The results of this study demonstrated that the kinetics of gas production of energy feed sources differed among themselves. Evaluation of various feedstuffs is helpful in balanced ration formulation for field animals and under farm conditions for better utilization of these commonly available feed resources.

  10. Artificial Neural Network Modelling of the Energy Content of Municipal Solid Wastes in Northern Nigeria

    Directory of Open Access Journals (Sweden)

    M. B. Oumarou

    2017-12-01

    Full Text Available The study presents an application of the artificial neural network model using the back propagation learning algorithm to predict the actual calorific value of the municipal solid waste in major cities of the northern part of Nigeria, with high population densities and intense industrial activities. These cities are: Kano, Damaturu, Dutse, Bauchi, Birnin Kebbi, Gusau, Maiduguri, Katsina and Sokoto. Experimental data of the energy content and the physical characterization of the municipal solid waste serve as the input parameter in nature of wood, grass, metal, plastic, food remnants, leaves, glass and paper. Comparative studies were made by using the developed model, the experimental results and a correlation which was earlier developed by the authors to predict the energy content. While predicting the actual calorific value, the maximum error was 0.94% for the artificial neural network model and 5.20% by the statistical correlation. The network with eight neurons and an R2 = 0.96881 in the hidden layer results in a stable and optimum network. This study showed that the artificial neural network approach could successfully be used for energy content predictions from the municipal solid wastes in Northern Nigeria and other areas of similar waste stream and composition.

  11. Computational Chemistry Laboratory: Calculating the Energy Content of Food Applied to a Real-Life Problem

    Science.gov (United States)

    Barbiric, Dora; Tribe, Lorena; Soriano, Rosario

    2015-01-01

    In this laboratory, students calculated the nutritional value of common foods to assess the energy content needed to answer an everyday life application; for example, how many kilometers can an average person run with the energy provided by 100 g (3.5 oz) of beef? The optimized geometries and the formation enthalpies of the nutritional components…

  12. A calorimeter-Faraday cup to measure energy content of ion beams

    International Nuclear Information System (INIS)

    Luzzi, G.

    1984-01-01

    A calorimeter-Faraday cup to measure energy content of ion beams is described. It uses an HP quartz thermometer having a 10 -40 C sensitivity; contact potential problems, arising when working with thermocouples, are so avoided. Calibration has been performed with a resistive filament and with an electron beam. The apparatus is profitable if the measured ion beams are constant in time. The measured sensitivity was 10 -40 C/10 -5 W. (author)

  13. Energy content of world trade

    International Nuclear Information System (INIS)

    Wagner, Gernot

    2010-01-01

    This paper constructs a comprehensive dataset of oil and total energy embedded in world trade of manufacturing goods for 73 countries from 1978 to 2000. Applying the data to debates on the dependency on foreign energy sources makes clear that achieving complete energy independence in the foreseeable future is unlikely to be feasible and may not be desirable. Applying it to the discussion of environmental Kuznets curves (EKCs) highlights an important distinction between production and consumption of energy. Richer countries use relatively less energy in their industrial production yet still consume relatively large amounts of energy indirectly. A further investigation largely excludes structural shifts of production in and out of the manufacturing sector as an explanation for the downward-sloping portion of the EKC. Country-level analyses add caveats but show tentative support for the cross-country conclusions. - Research highlights: →Energy dependency goes beyond direct imports; energy is also embedded in trade. →Production-based energy use follows an inverse U-shape, consumption-based energy use does not. →Richer countries import energy-intensive products and, thus, export pollution.

  14. Energy-Efficient Hosting Rich Content from Mobile Platforms with Relative Proximity Sensing.

    Science.gov (United States)

    Park, Ki-Woong; Lee, Younho; Baek, Sung Hoon

    2017-08-08

    In this paper, we present a tiny networked mobile platform, termed Tiny-Web-Thing ( T-Wing ), which allows the sharing of data-intensive content among objects in cyber physical systems. The object includes mobile platforms like a smartphone, and Internet of Things (IoT) platforms for Human-to-Human (H2H), Human-to-Machine (H2M), Machine-to-Human (M2H), and Machine-to-Machine (M2M) communications. T-Wing makes it possible to host rich web content directly on their objects, which nearby objects can access instantaneously. Using a new mechanism that allows the Wi-Fi interface of the object to be turned on purely on-demand, T-Wing achieves very high energy efficiency. We have implemented T-Wing on an embedded board, and present evaluation results from our testbed. From the evaluation result of T-Wing , we compare our system against alternative approaches to implement this functionality using only the cellular or Wi-Fi (but not both), and show that in typical usage, T-Wing consumes less than 15× the energy and is faster by an order of magnitude.

  15. Energy contents of frequently ordered restaurant meals and comparison with human energy requirements and US Department of Agriculture database information: a multisite randomized study

    Science.gov (United States)

    BACKGROUND: Excess energy intake from meals consumed away from home is implicated as a major contributor to obesity, and ~50% of US restaurants are individual or small-chain (non-chain) establishments that do not provide nutrition information. OBJECTIVE: To measure the energy content of frequently o...

  16. Local content requirements and the impact on the South African renewable energy sector: A survey-based analysis

    Directory of Open Access Journals (Sweden)

    Christopher Ettmayr

    2017-08-01

    Full Text Available Background: Economies aim to grow over time, which usually implies the need for increased energy availability. Governments can use their procurement of energy to increase benefits in their economies via certain policy tools. One such tool is local content requirements (LCRs, where the purchase of goods prescribes that a certain value has to be sourced locally. The argument for this tool is that spending is localised and manufacturing, as well as job creation, can be stimulated because industry will need to establish in the host economy. However, this practice is distortionary in effect and does not create a fair playing ground for global trade. Furthermore, if the local content definition is weak, or open to manipulation, the goals of such a policy may not be achieved at all. Aim: The objective of this study was to determine how LCRs would ultimately impact on the overall procurement programme. Setting: This study took place as South Africa commenced with large scale development of the renewable energy sector. This was largely achieved via the State run Renewable Energy Independent Power Producer Procurement Programme (REIPPPP. Method: This study utilised opinion-based surveys to look into the LCRs of South Africa’s REIPPPP and measure the impact of this policy on the renewable energy sector in general. The mixed method approach was utilised to analyse qualitative and quantitative data and this was then triangulated with an international peer group to arrive at certain conclusions. The Delphi Technique was then employed to achieve population consensus on the findings. Results and conclusion: It was found that, in order to implement a policy such as local content without any negative welfare effects, the host economy had to show certain pre-existing conditions. Because South Africa does not hold all supportive pre-conditions, the impact and effect of LCRs have not been optimal, and it has not been found to be a sustainable mechanism to

  17. Modeling the energy content of combustible ship-scrapping waste at Alang-Sosiya, India, using multiple regression analysis.

    Science.gov (United States)

    Reddy, M Srinivasa; Basha, Shaik; Joshi, H V; Sravan Kumar, V G; Jha, B; Ghosh, P K

    2005-01-01

    Alang-Sosiya is the largest ship-scrapping yard in the world, established in 1982. Every year an average of 171 ships having a mean weight of 2.10 x 10(6)(+/-7.82 x 10(5)) of light dead weight tonnage (LDT) being scrapped. Apart from scrapped metals, this yard generates a massive amount of combustible solid waste in the form of waste wood, plastic, insulation material, paper, glass wool, thermocol pieces (polyurethane foam material), sponge, oiled rope, cotton waste, rubber, etc. In this study multiple regression analysis was used to develop predictive models for energy content of combustible ship-scrapping solid wastes. The scope of work comprised qualitative and quantitative estimation of solid waste samples and performing a sequential selection procedure for isolating variables. Three regression models were developed to correlate the energy content (net calorific values (LHV)) with variables derived from material composition, proximate and ultimate analyses. The performance of these models for this particular waste complies well with the equations developed by other researchers (Dulong, Steuer, Scheurer-Kestner and Bento's) for estimating energy content of municipal solid waste.

  18. Impact of insufficient energy content in the design time history on the structure response

    International Nuclear Information System (INIS)

    Ma, D.C.; Gvildys, J.; Chang, Y.W.; Seidensticker, R.W.

    1989-01-01

    In the design of nuclear power plants, it is often desirable to use the time history method in the soil-structure interaction analysis to determine the plant floor response to seismic loads. Because many design criteria are specified in terms of design response spectra, the artificial time history needs to be generated under the requirement that the response spectra of the artificial history should envelop the given design response spectra. However, recent studies indicate that the artificial time history used in the plant design may have insufficient energy in the frequency range of interest, even though the response spectra of the design time history closely envelop the design response spectra. This paper presents an investigation of the effects of the insufficient energy content in the design time history on the response of the soil-structure system. Numerical studies were carried out. Both the real earthquake records and the artificial time histories were used as the input motions in a simple lumped-mass soil-structure interaction model. The results obtained from this study provide a better understanding of the effects of the insufficient energy content in the design time history on the structural response

  19. Energy content of world trade

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Gernot [Environmental Defense Fund, 257 Park Avenue South, New York, NY 10010 (United States)

    2010-12-15

    This paper constructs a comprehensive dataset of oil and total energy embedded in world trade of manufacturing goods for 73 countries from 1978 to 2000. Applying the data to debates on the dependency on foreign energy sources makes clear that achieving complete energy independence in the foreseeable future is unlikely to be feasible and may not be desirable. Applying it to the discussion of environmental Kuznets curves (EKCs) highlights an important distinction between production and consumption of energy. Richer countries use relatively less energy in their industrial production yet still consume relatively large amounts of energy indirectly. A further investigation largely excludes structural shifts of production in and out of the manufacturing sector as an explanation for the downward-sloping portion of the EKC. Country-level analyses add caveats but show tentative support for the cross-country conclusions. (author)

  20. Influence of Rotational Transform and Magnetic Shear on the Energy Content of TJ-II Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Estrada, T.; Ascasibar, E.; Castejon, F.; Jimenez, J. A.; Lopez-Bruna, D.; Pastor, I.

    2002-07-01

    In the magnetic configuration scans performed in TJ-II stellarator, low plasma energy content is found to be related to the presence of low order rational surfaces within the confinement region in low plasma density experiments. Plasma currents of about-1 kA (mainly bootstrap driven) can substantially increase the magnetic shear in TJ-II and under these conditions the confinement is no longer deteriorated by low order rational surfaces. Experiments with higher plasma currents (OH induced currents up to +/-10 kA) show a non-symmetric dependence on the sign of the magnetic shear. Preliminary results show a substantial improvement of the confinement in the case of negative plasma current, while minor changes are observed in the plasma energy content when positive current is induced in magnetic configurations that in vacuum exclude low order rational surfaces. (Author) 12 refs.

  1. Influence of Rotational Transform and Magnetic Shear on the Energy Content of TJ-II Plasmas

    International Nuclear Information System (INIS)

    Estrada, T.; Ascasibar, E.; Castejon, F.; Jimenez, J. A.; Lopez-Bruna, D.; Pastor, I.

    2002-01-01

    In the magnetic configuration scans performed in TJ-II stellarator, low plasma energy content is found to be related to the presence of low order rational surfaces within the confinement region in low plasma density experiments. Plasma currents of about-1 kA (mainly bootstrap driven) can substantially increase the magnetic shear in TJ-II and under these conditions the confinement is no longer deteriorated by low order rational surfaces. Experiments with higher plasma currents (OH induced currents up to +/-10 kA) show a non-symmetric dependence on the sign of the magnetic shear. Preliminary results show a substantial improvement of the confinement in the case of negative plasma current, while minor changes are observed in the plasma energy content when positive current is induced in magnetic configurations that in vacuum exclude low order rational surfaces. (Author) 12 refs

  2. Combined high-power ultrasound and high-pressure homogenization nanoemulsification: The effect of energy density, oil content and emulsifier type and content.

    Science.gov (United States)

    Calligaris, Sonia; Plazzotta, Stella; Valoppi, Fabio; Anese, Monica

    2018-05-01

    Combinations of ultrasound (US) and high-pressure homogenization (HPH) at low-medium energy densities were studied as alternative processes to individual US and HPH to produce Tween 80 and whey protein stabilized nanoemulsions, while reducing the energy input. To this aim, preliminary trials were performed to compare emulsification efficacy of single and combined HPH and US treatments delivering low-medium energy densities. Results highlighted the efficacy of US-HPH combined process in reducing the energy required to produce nanoemulsions stabilized with both Tween 80 and whey protein isolate. Subsequently, the effect of emulsifier content (1-3% w/w), oil amount (10-20% w/w) and energy density (47-175 MJ/m 3 ) on emulsion mean particle diameter was evaluated by means of a central composite design. Particles of 140-190 nm were obtained by delivering 175 MJ/m 3 energy density at emulsions containing 3% (w/w) Tween 80 and 10% (w/w) oil. In the case of whey protein isolate stabilized emulsions, a reduced emulsifier amount (1% w/w) and intermediate energy density (120 MJ/m 3 ) allowed a minimum droplet size around 220-250 nm to be achieved. Results showed that, in both cases, at least 50% of the energy density should be delivered by HPH to obtain the minimum particle diameter. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Imprint of the symmetry energy on the inner crust and strangeness content of neutron stars

    Energy Technology Data Exchange (ETDEWEB)

    Providencia, Constanca; Chiacchiera, Silvia; Grill, Fabrizio; Rabhi, Aziz; Vidana, Isaac [University of Coimbra, Centro de Fisica Computacional, Department of Physics, Coimbra (Portugal); Avancini, Sidney S.; Menezes, Debora P. [Universidade Federal de Santa Catarina, Departamento de Fisica, SC - CP. 476, Florianopolis (Brazil); Cavagnoli, Rafael [Universidade Federal de Pelotas, Departamento de Fisica, CP 354, Pelotas/SC (Brazil); Ducoin, Camille; Margueron, Jerome [Universite Claude Bernard Lyon 1, Institut de Physique Nucleaire de Lyon, Villeurbanne (France)

    2014-02-15

    In this work we study the effect of the symmetry energy on several properties of neutron stars. First, we discuss its effect on the density, proton fraction and pressure of the neutron star crust-core transition. We show that whereas the first two quantities present a clear correlation with the slope parameter L of the symmetry energy, no satisfactory correlation is seen between the transition pressure and L. However, a linear combination of the slope and curvature parameters at ρ = 0.1 fm{sup -3} is well correlated with the transition pressure. In the second part we analyze the effect of the symmetry energy on the pasta phase. It is shown that the size of the pasta clusters, number of nucleons and the cluster proton fraction depend on the density dependence of the symmetry energy: a small L gives rise to larger clusters. The influence of the equation of state at subsaturation densities on the extension of the inner crust of the neutron star is also discussed. Finally, the effect of the density dependence of the symmetry energy on the strangeness content of neutron stars is studied in the last part of the work. It is found that charged (neutral) hyperons appear at smaller (larger) densities for smaller values of the slope parameter L. A linear correlation between the radius and the strangeness content of a star with a fixed mass is also found. (orig.)

  4. Toward the greening of nuclear energy: A content analysis of nuclear energy frames from 1991 to 2008

    Science.gov (United States)

    Miller, Sonya R.

    Framing theory has emerged as one of the predominant theories employed in mass communications research in the 21st century. Frames are identified as interpretive packages for content where some issue attributes are highlighted over other attributes. While framing effects studies appear plentiful, longitudinal studies assessing trends in dominant framing packages and story elements for an issue appear to be less understood. Through content analysis, this study examines dominant frame packages, story elements, headline tone, story tone, stereotypes, and source attribution for nuclear energy from 1991-2008 in the New York Times, USA Today, the Wall Street Journal, and the Washington Post. Unlike many content analysis studies, this study compares intercoder reliability among three indices---percentage agreement, proportional reduction of loss and Scott's Pi. The newspapers represented in this study possess a commonality in the types of dominant frames packages employed. Significant dominant frame packages among the four newspapers include human/health, proliferation, procedural, and marketplace. While the procedural frame package was more likely to appear prior to the 1997 Kyoto Protocol, the proliferation frame packaged was more likely to appear after the Kyoto Protol. Over time, the sustainable frame package demonstrated increased significance. This study is part of the growing literature regarding the function of frames over time.

  5. Frequency, moisture content, and temperature dependent dielectric properties of potato starch related to drying with radio-frequency/microwave energy.

    Science.gov (United States)

    Zhu, Zhuozhuo; Guo, Wenchuan

    2017-08-24

    To develop advanced drying methods using radio-frequency (RF) or microwave (MW) energy, dielectric properties of potato starch were determined using an open-ended coaxial-line probe and network analyzer at frequencies between 20 and 4,500 MHz, moisture contents between 15.1% and 43.1% wet basis (w.b.), and temperatures between 25 and 75 °C. The results showed that both dielectric constant (ε') and loss factor (ε″) were dependent on frequency, moisture content, and temperature. ε' decreased with increasing frequency at a given moisture content or temperature. At low moisture contents (≤25.4% w.b.) or low temperatures (≤45 °C), ε″ increased with increasing frequency. However, ε″ changed from decrease to increase with increasing frequency at high moisture contents or temperatures. At low temperatures (25-35 °C), both ε' and ε″ increased with increasing moisture content. At low moisture contents (15.1-19.5% w.b.), they increased with increasing temperature. The change trends of ε' and ε″ were different and dependent on temperature and moisture content at their high levels. The penetration depth (d p ) decreased with increasing frequency. RF treatments may provide potential large-scale industrial drying application for potato starch. This research offers useful information on dielectric properties of potato starch related to drying with electromagnetic energy.

  6. Effects of different cropping systems and weed management methods on free energy and content of pigments in maize

    Directory of Open Access Journals (Sweden)

    Igor Spasojević

    2014-03-01

    Full Text Available Rotation is a cropping system that has many advantages and ensures better crop growth and yielding. Its combinination with other cropping measures can ensure optimal crop density for maximal growth and photosynthesis efficiency. The aim of this study was to investigate the influence of different cropping systems: monoculture and two rotations, including maize, wheat and soybean (MSW and MWS, and different weed management methods (weed removal by hoeing, application of a full recommended herbicide dose (RD and half that dose (0.5 RD, and weedy check on weed biomass and maize growth parameters - leaf area index (LAI, free energy, contents of chlorophyll and carotenoids, grain yield, and their possible relationships in two fields of the maize hybrids ZP 677 (H1 and ZP 606 (H2. The lowest LAI and grain yield were found in monoculture, particularly in weedy check, which had relatively high weed infestation. Higher weed biomass was also observed in herbicide treated plots in monoculture. Such high competition pressure indicates a stress reflected on reduced LAI and chlorophyll content, and increased free energy and content of carotenoids. On the other hand, rotation, particularly if it is combined with the application of herbicides or hoeing, had a positive impact on yielding potential by increasing LAI and the contents of chlorophyll and carotenoids, and decreasing free energy.

  7. Numerical Analysis of the Influence of Thermal Mass, Phase Change Materials and Furniture / Indoor Content on Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Dreau, Jerome Le

    2017-01-01

    Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However, th......, it is shown that the integration of phase change materials in wallboards or furniture elements can appreciably improve the energy flexibility of buildings.......Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However...

  8. Energy content of suspended detritus from Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Krishnakumari, L.; Sumitra-Vijayaraghavan; Royan, J

    stream_size 3 stream_content_type text/plain stream_name Indian_J_Mar_Sci_20_80.pdf.txt stream_source_info Indian_J_Mar_Sci_20_80.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset=ISO-8859-1 ...

  9. Analytical method to evaluate fuel consumption of hybrid electric vehicles at balanced energy content of the electric storage devices

    Energy Technology Data Exchange (ETDEWEB)

    Katrasnik, Tomaz [University of Ljubljana, Faculty of Mechanical Engineering, Askerceva 6, 1000 Ljubljana (Slovenia)

    2010-11-15

    Innovative analytically based method to calculate corrected fuel consumption of parallel and series hybrid electric vehicles (HEVs) at balanced energy content of the electric storage devices is proposed and validated in the paper. The proposed analytical method is generally applicable and features highly accurate corrected fuel consumption results. It enables calculation of the corrected fuel consumption out of a single fuel consumption test run in a single analytic post-processing step. An additional fuel consumption test run might be needed to obtain highly accurate results if ratio of the energy content deviation of the electric storage devices to the energy used for vehicle propulsion over the test cycle is high. Proposed method enables consideration of non-linear energy flow changes and non-linear HEV component efficiency changes caused by the energy management strategy or by the component characteristics. The method therefore features highly accurate results out of the minimum number of fuel consumption test runs and thus optimizes workload for development or optimization of HEVs. The input data of the method are characteristic energy flows and efficiencies that are derived from the energy flows on selected energy paths of HEVs. (author)

  10. Estimating the Energy Content of Wastewater Using Combustion Calorimetry and Different Drying Processes

    Energy Technology Data Exchange (ETDEWEB)

    Korth, Benjamin; Maskow, Thomas; Günther, Susanne; Harnisch, Falk, E-mail: falk.harnisch@ufz.de [Department of Environmental Microbiology, Helmholtz-Centre for Environmental Research, Leipzig (Germany)

    2017-09-19

    The energy content of wastewater is routinely assessed by chemical oxygen demand (COD) measurements that only provide an incomplete picture and the data fundament of other energy parameters remains scarce. The volumetric heat of combustion (Δ{sub C}H) of raw wastewater from a municipal wastewater treatment plant (WWTP) was assessed using oven drying method (Δ{sub C}H{sub vol} = −6.8 ± 4.3 kJ L{sup −1}, n = 20) and freeze drying method (Δ{sub C}H{sub vol} = −20.2 ± 9.7 kJ L{sup −1}, n = 6) illustrating the substantial loss during the oven drying approach. Normalizing Δ{sub C}H to COD of raw wastewater yielded −6.2 ± 3.5 kJ gCOD{sup −1} for oven-dried samples (n = 14) and −13.0 ± 1.6 kJ gCOD{sup −1} for freeze-dried samples (n = 3). A subsequent correlation analysis with further chemical wastewater parameters revealed a dependency of Δ{sub C}H{sub vol} on COD, total organic carbon (TOC), C:N ratio, and total sulfur content. To verify these correlations, wastewater of a second WWTP was sampled and analyzed. Only COD and TOC were in accordance with the data set from the first WWTP representing potential predictors for the chemical energy stored in wastewater for comparable WWTPs. Unfortunately, during the most practical method (oven drying), a certain loss of volatile compounds is inevitable so that the derived Δ{sub C}H{sub vol} systematically underestimates the total energetic potential of wastewater. Nevertheless, this work expands the, so far, little data fundament on the energy resource wastewater and implies the requirement for further long-term studies on different sites and different wastewater types with a highly standardized sample treatment protocol.

  11. Macronutrient manipulations of cheese resulted in lower energy content without compromising its satiating capacity

    DEFF Research Database (Denmark)

    Hansen, Thea Toft; Sjödin, Anders Mikael; Ritz, Christian

    2018-01-01

    Manipulation of food’s macronutrient composition in order to reduce energy content without compromising satiating capacity may be helpful in body weight control. For cheeses, substituting fat with protein may provide such opportunity. We aimed at examining the acute effect of cheeses with different...... macronutrient compositions on accumulated energy intake and subjective appetite sensation. A total of thirty-nine normal-weight (average BMI 24·4 kg/m2) men and women completed the partly double-blind, randomised crossover study with high-protein/low-fat (HP/LF, 696 kJ), high-protein/high-fat (HP/HF, 976 k...

  12. Dynamic contents of energy and organic nutrient in steppe growths of the Mohelenská Serpentine Steppe National Nature Reserve

    Directory of Open Access Journals (Sweden)

    Pavel Veselý

    2006-01-01

    Full Text Available The aim of the study was to determine the dynamics in the content of organic nutrients, ash and energy in dry matter of growths within the Mohelenská Serpentine Steppe National Nature Reserve (NPR, and to document their initial nutritive value before the intended grazing. Plant samples in 1995 and 1996 during the growing season in 14-days intervals from the area of 3 × 1 m2. Amounts of dry matter, fibre, nitrogen substances, fat and ashes were determined in growths according to the ANONYM (2001. Nitrogen-free extract substances (BNLV were determined by final calculating; BE, ME, NEL, NEV, PDIN and PDIE were calculated using the regression equations (VESELÝ and ZEMAN, 1995, 1997. Combining ratio (SP was calculated according to the relation: SP = PDIN (g/NEL (MJ. The dynamics of the contents of dry matter, organic nutrients, ashes and energy were assessed in the growth during the vegetation period and the dynamics was compared with standardized requirements of sheep (no pregnant ewe. Regression and correlation relations for nutrition value of the growths during vegetation period were calculated by use of mathematical-statistical analysis. Only statistically significantly (P<0.05 different parameters form the zero are presented in the paper. The content of dry matter in the growths culminated in summer months (places D8, E13, B17 and it was accompanied by depression in autumn months. After the highest content of crude protein, PDIN and PDIE recorded in spring months summer depression (August followed, this depression was partly balanced by autumn growth of vegetation. The content of ash in steppe growths increased during evaluated period. Similar tendency was registered for fat. Also the contents of fibre and BNLV linearly increased. The contents of nitrogen nutrients and energy corresponded with standardized requirements for sheep during whole vegetation period. Conversely the content of fibre highly exceeded the requirement except in spring

  13. Variability in the reported energy, total fat and saturated fat contents in fast-food products across ten countries.

    Science.gov (United States)

    Ziauddeen, Nida; Fitt, Emily; Edney, Louise; Dunford, Elizabeth; Neal, Bruce; Jebb, Susan A

    2015-11-01

    Fast foods are often energy dense and offered in large serving sizes. Observational data have linked the consumption of fast foods to an increased risk of obesity and related diseases. We surveyed the reported energy, total fat and saturated fat contents, and serving sizes, of fast-food items from five major chains across ten countries, comparing product categories as well as specific food items available in most countries. MRC Human Nutrition Research, Cambridge, UK. Data for 2961 food and drink products were collected, with most from Canada (n 550) and fewest from the United Arab Emirates (n 106). There was considerable variability in energy and fat contents of fast foods across countries, reflecting both the portfolio of products and serving size variability. Differences in total energy between countries were particularly noted for chicken dishes (649-1197 kJ/100 g) and sandwiches (552-1050 kJ/100g). When comparing the same product between countries variations were consistently observed in total energy and fat contents (g/100 g); for example, extreme variation in McDonald's Chicken McNuggets with 12 g total fat/100 g in Germany compared with 21·1 g/100 g in New Zealand. These cross-country variations highlight the possibility for further product reformulation in many countries to reduce nutrients of concern and improve the nutritional profiles of fast-food products around the world. Standardisation of serving sizes towards the lower end of the range would also help to reduce the risk of overconsumption.

  14. Variability in the reported energy, total fat and saturated fat content in fast food products across ten countries

    Science.gov (United States)

    Ziauddeen, Nida; Fitt, Emily; Edney, Louise; Dunford, Elizabeth; Neal, Bruce; Jebb, Susan A.

    2016-01-01

    Objective Fast foods are often energy dense and offered in large serving sizes. Observational data has linked the consumption of fast food to an increased risk of obesity and related diseases. Design We surveyed the reported energy, total fat and saturated fat contents, and serving sizes, of fast food items from five major chains across 10 countries, comparing product categories as well as specific food items available in most countries. Setting MRC Human Nutrition Research (HNR), Cambridge Subjects Data for 2961 food and drink products were collected, with most from Canada (n=550) and fewest from United Arab Emirates (n=106). Results There was considerable variability in energy and fat content of fast food across countries, reflecting both the portfolio of products, and serving size variability. Differences in total energy between countries were particularly noted for chicken dishes (649-1197kJ/100g) and sandwiches (552-1050kJ/100g). When comparing the same product between countries variations were consistently observed in total energy and fat content (g/100g) with extreme variation in McDonald’s Chicken McNuggets with 12g total fat (g/100g) in Germany compared to 21.1g in New Zealand. Conclusions These cross-country variations highlight the possibility for further product reformulation in many countries to reduce nutrients of concern and improve the nutritional profiles of fast food products around the world. Standardisation of serving sizes towards the lower end of the range would also help to reduce the risk of overconsumption. PMID:25702788

  15. Dietary protein content alters energy expenditure and composition of the mass gain in grizzly bears (Ursus arctos horribilis).

    Science.gov (United States)

    Felicetti, Laura A; Robbins, Charles T; Shipley, Lisa A

    2003-01-01

    Many fruits contain high levels of available energy but very low levels of protein and other nutrients. The discrepancy between available energy and protein creates a physiological paradox for many animals consuming high-fruit diets, as they will be protein deficient if they eat to meet their minimum energy requirement. We fed young grizzly bears both high-energy pelleted and fruit diets containing from 1.6% to 15.4% protein to examine the role of diet-induced thermogenesis and fat synthesis in dealing with high-energy-low-protein diets. Digestible energy intake at mass maintenance increased 2.1 times, and composition of the gain changed from primarily lean mass to entirely fat when the protein content of the diet decreased from 15.4% to 1.6%. Daily fat gain was up to three times higher in bears fed low-protein diets ad lib., compared with bears consuming the higher-protein diet and gaining mass at the same rate. Thus, bears eating fruit can either consume other foods to increase dietary protein content and reduce energy expenditure, intake, and potentially foraging time or overeat high-fruit diets and use diet-induced thermogenesis and fat synthesis to deal with their skewed energy-to-protein ratio. These are not discrete options but a continuum that creates numerous solutions for balancing energy expenditure, intake, foraging time, fat accumulation, and ultimately fitness, depending on food availability, foraging efficiency, bear size, and body condition.

  16. The effect of vortex merging and non-merging on the transfer of modal turbulent kinetic energy content

    Science.gov (United States)

    Ground, Cody; Vergine, Fabrizio; Maddalena, Luca

    2016-08-01

    A defining feature of the turbulent free shear layer is that its growth is hindered by compressibility effects, thus limiting its potential to sufficiently mix the injected fuel and surrounding airstream at the supersonic Mach numbers intrinsic to the combustor of air-breathing hypersonic vehicles. The introduction of streamwise vorticity is often proposed in an attempt to counteract these undesired effects. This fact makes the strategy of introducing multiple streamwise vortices and imposing upon them certain modes of mutual interaction in order to potentially enhance mixing an intriguing concept. However, many underlying fundamental characteristics of the flowfields in the presence such interactions are not yet well understood; therefore, the fundamental physics of these flowfields should be independently investigated before the explicit mixing performance is characterized. In this work, experimental measurements are taken with the stereoscopic particle image velocimetry technique on two specifically targeted modes of vortex interaction—the merging and non-merging of two corotating vortices. The fluctuating velocity fields are analyzed utilizing the proper orthogonal decomposition (POD) in order to identify the content, organization, and distribution of the modal turbulent kinetic energy content of the fluctuating velocity eigenmodes. The effects of the two modes of vortex interaction are revealed by the POD analysis which shows distinct differences in the modal features of the two cases. When comparing the low-order eigenmodes of the two cases, the size of the structures contained within the first ten modes is seen to increase as the flow progresses downstream for the merging case, whereas the opposite is true for the non-merging case. Additionally, the relative modal energy contribution of the first ten eigenmodes increases as the vortices evolve downstream for the merging case, whereas in the non-merging case the relative modal energy contribution decreases

  17. QoE-Driven Energy-Aware Multipath Content Delivery Approach for MPTCP-Based Mobile Phones

    Institute of Scientific and Technical Information of China (English)

    Yuanlong Cao; Shengyang Chen; Qinghua Liu; Yi Zuo; Hao Wang; Minghe Huang

    2017-01-01

    Mobile phones equipped with multiple wireless interfaces can increase their goodput performance by making use of concurrent transmissions over multiple paths,enabled by the Multipath TCP (MPTCP).However,utilizing MPTCP for data delivery may generally result in higher energy consumption,while the battery power of a mobile phone is limited.Thus,how to optimize the energy usage becomes very crucial and urgent.In this paper,we propose MPTCP-QE,a novel quality of experience (QoE)-driven energy-aware multipath content delivery approach for MPTCP-based mobile phones.The main idea of MPTCP-QE is described as follows:it first provides an application rate-aware energy-efficient subflow management strategy to tradeoff throughput performance and energy consumption for mobile phones;then uses an available bandwidth-aware congestion window fast recovery strategy to make a sender avoid unnecessary slow-start and utilize wireless resource quickly;and further introduces a novel receiver-driven energy-efficient SACK strategy to help a receiver possible to detect SACK loss timely and trigger loss recovery in a more energy-efficient way.The simulation results show that with the MPTCP-QE,the energy usage is enhanced while the performance level is maintained compared to existing MPTCP solutions.

  18. Comparative analysis of bone mineral contents with dual-energy quantitative computed tomography

    International Nuclear Information System (INIS)

    Choi, T. J.; Yoon, S. M.; Kim, O. B.; Lee, S. M.; Suh, S. J.

    1997-01-01

    The Dual-Energy Quantitative Computed Tomography(DEQCT) was compared with bone equivalent K 2 HPO 4 standard solution and ash weight of animal cadaveric trabecular bone in the measurement of bone mineral contents(BMC). The attenuation coefficient of tissues highly depends on the radiation energy, density and effective atomic number of composition. The bone mineral content of DEQCT in this experiments was determined from empirical constants and mass attenuation coefficients of bone, fat and soft tissue equivalent solution in two photon spectra. In this experiments, the BMC of DEQCT with 80 and 120kV p X rays was compared to ash weight of animal trabecular bone. We obtained the mass attenuation coefficient of 0.2409, 0.5608 and 0.2206 in 80kV p , and 0.2046, 0.3273 and 0.1971 cm 2 /g in 120kV p X-ray spectra for water, bone and fat equivalent materials, respectively. The BMC with DEQCT was accomplished with empirical constants K 1 =0.3232, K 2 =0.2450 and mass attenuation coefficients has very closed to ash weight of animal trabecular bone. The BMC of empirical DEQCT and that of manufacturing DEQCT were correlated with ash weight as a correlation r=0.998 and r=0.996, respectively. The BMC of empirical DEQCT using the experimental mass attenuation coefficients and that of manufacture have showed very close to ash weight of animal trabecular bone. (author)

  19. Effects of Post-harvest Storage Duration and Variety on Nutrient Digestibility and Energy Content Wheat in Finishing Pigs.

    Science.gov (United States)

    Guo, P P; Li, P L; Li, Z C; Stein, H H; Liu, L; Xia, T; Yang, Y Y; Ma, Y X

    2015-10-01

    This study was conducted to investigate the effects of post-harvest storage duration and wheat variety on the digestibility and energy content of new season wheat fed to finishing pigs. Two wheat varieties (Shi and Zhong) were harvested in 2013 and stored in the warehouse of the Fengning Pig Experimental Base at China Agricultural University for 3, 6, 9, or 12 mo. For each storage period, 12 barrows were placed in metabolism crates and allotted to diets containing 1 of the 2 wheat varieties in a randomized complete block design. The experimental diets contained 97.34% wheat and 2.66% of a vitamin and trace mineral premix. With an extension of storage duration from 3 mo to 12 mo, the gross energy (GE) and crude protein (CP) of the wheat decreased by 2.0% and 12.01%, respectively, while the concentration of neutral detergent fiber (NDF), acid detergent fiber (ADF) and starch content increased by 30.26%, 19.08%, and 2.46%, respectively. Total non-starch polysaccharide, total arabinose, total xylose and total mannose contents decreased by 46.27%, 45.80%, 41.71%, and 75.66%, respectively. However, there were no significant differences in the chemical composition between the two wheat varieties with the exception of ADF which was approximately 13.37% lower in Shi. With an extension of storage duration from 3 mo to 12 mo, the digestible energy (DE), metabolizable energy (ME) content and the apparent total tract digestibility of GE, CP, dry matter, organic matter, ether extract, ADF and metabolizability of energy in wheat decreased linearly (pdigestibility of NDF changed quadratically (pdigestibility (pdigestibility of variety Zhong was stable during 9 mo of storage, while the CP digestibility of variety Shi decreased (p<0.05). In conclusion, the GE, DE, and ME of wheat was stable during the first 3 to 6 mo of post-harvest storage, and decreased during the following 6 to 12 mo of storage under the conditions of this study.

  20. A Bit String Content Aware Chunking Strategy for Reduced CPU Energy on Cloud Storage

    Directory of Open Access Journals (Sweden)

    Bin Zhou

    2015-01-01

    Full Text Available In order to achieve energy saving and reduce the total cost of ownership, green storage has become the first priority for data center. Detecting and deleting the redundant data are the key factors to the reduction of the energy consumption of CPU, while high performance stable chunking strategy provides the groundwork for detecting redundant data. The existing chunking algorithm greatly reduces the system performance when confronted with big data and it wastes a lot of energy. Factors affecting the chunking performance are analyzed and discussed in the paper and a new fingerprint signature calculation is implemented. Furthermore, a Bit String Content Aware Chunking Strategy (BCCS is put forward. This strategy reduces the cost of signature computation in chunking process to improve the system performance and cuts down the energy consumption of the cloud storage data center. On the basis of relevant test scenarios and test data of this paper, the advantages of the chunking strategy are verified.

  1. Energy recovery from wastewater treatment plants through sludge anaerobic digestion: effect of low-organic-content sludge.

    Science.gov (United States)

    Zhang, Yuyao; Li, Huan

    2017-09-18

    During anaerobic digestion, low-organic-content sludge sometimes is used as feedstock, resulting in deteriorated digestion performance. The operational experience of conventional anaerobic digestion cannot be applied to this situation. To investigate the feature of low-organic-content sludge digestion and explain its intrinsic mechanism, batch experiments were conducted using designed feedstock having volatile solids (VS) contents that were 30-64% of total solids (TS). The results showed that the accumulative biogas yield declined proportionally from 173.7 to 64.8 ml/g VS added and organic removal rate decreased from 34.8 to 11.8% with decreasing VS/TS in the substrate. The oligotrophic environment resulting from low-organic-content substrates led to decreased microbial activity and a switch from butyric fermentation to propionic fermentation. A first-order model described the biogas production from the batch experiments very well, and the degradation coefficient decreased from 0.159 to 0.069 day -1 , exhibiting a positive relation with organic content in substrate. The results observed here corroborated with data from published literature on anaerobic digestion of low-organic-content sludge and showed that it may not be feasible to recover energy from sludge with an organic content lower than 50% through mono digestion.

  2. Effects of inclusion level on nutrient digestibility and energy content of wheat middlings and soya bean meal for growing pigs.

    Science.gov (United States)

    Huang, Qiang; Piao, Xiangshu; Liu, Ling; Li, Defa

    2013-01-01

    Two experiments were conducted to determine the effects of inclusion level of wheat middlings and soya bean meal on apparent total tract digestibility (ATTD) of energy and chemical components of these ingredients in growing pigs. Furthermore, the effects of the inclusion level on their contents of digestible energy (DE) and metabolisable energy (ME) were also determined by the difference method. In Experiment 1, six diets were fed to 36 growing pigs according to a completely randomised design. The basal diet was a corn-soya bean meal diet while the other five diets contained 9.6%, 19.2%, 28.8%, 38.4% or 48.0% of wheat middlings added at the expense of corn and soya bean meal. The measured digestibility of energy and most nutrients of wheat middlings increased (p soya bean meal (22.2% and 33.6%). The content of DE in soya bean meal did not differ at 22.2% and 33.6% inclusion levels (16.2 and 16.3 MJ/kg DM, respectively), but the digestibility of dry matter (DM), organic matter and carbohydrates was increased at a higher inclusion level (p soya bean meal and wheat middlings was affected by their dietary inclusion levels. For soya bean meal, the estimated energy contents was independent of its inclusion level, but not for wheat middlings. Therefore, the inclusion level of wheat middlings has to be considered for estimating their energy value.

  3. Energy beverages: content and safety.

    Science.gov (United States)

    Higgins, John P; Tuttle, Troy D; Higgins, Christopher L

    2010-11-01

    Exercise is making a resurgence in many countries, given its benefits for fitness as well as prevention of obesity. This trend has spawned many supplements that purport to aid performance, muscle growth, and recovery. Initially, sports drinks were developed to provide electrolyte and carbohydrate replacement. Subsequently, energy beverages (EBs) containing stimulants and additives have appeared in most gyms and grocery stores and are being used increasingly by "weekend warriors" and those seeking an edge in an endurance event. Long-term exposure to the various components of EBs may result in significant alterations in the cardiovascular system, and the safety of EBs has not been fully established. For this review, we searched the MEDLINE and EMBASE databases from 1976 through May 2010, using the following keywords: energy beverage, energy drink, power drink, exercise, caffeine, red bull, bitter orange, glucose, ginseng, guarana, and taurine. Evidence regarding the effects of EBs is summarized, and practical recommendations are made to help in answering the patient who asks, "Is it safe for me to drink an energy beverage when I exercise?"

  4. Changes in energy content of lunchtime purchases from fast food restaurants after introduction of calorie labelling: cross sectional customer surveys.

    Science.gov (United States)

    Dumanovsky, Tamara; Huang, Christina Y; Nonas, Cathy A; Matte, Thomas D; Bassett, Mary T; Silver, Lynn D

    2011-07-26

    To assess the impact of fast food restaurants adding calorie labelling to menu items on the energy content of individual purchases. Cross sectional surveys in spring 2007 and spring 2009 (one year before and nine months after full implementation of regulation requiring chain restaurants' menus to contain details of the energy content of all menu items). Setting 168 randomly selected locations of the top 11 fast food chains in New York City during lunchtime hours. 7309 adult customers interviewed in 2007 and 8489 in 2009. Energy content of individual purchases, based on customers' register receipts and on calorie information provided for all items in menus. For the full sample, mean calories purchased did not change from before to after regulation (828 v 846 kcal, P = 0.22), though a modest decrease was shown in a regression model adjusted for restaurant chain, poverty level for the store location, sex of customers, type of purchase, and inflation adjusted cost (847 v 827 kcal, P = 0.01). Three major chains, which accounted for 42% of customers surveyed, showed significant reductions in mean energy per purchase (McDonald's 829 v 785 kcal, P = 0.02; Au Bon Pain 555 v 475 kcal, PKFC 927 v 868 kcal, P<0.01), while mean energy content increased for one chain (Subway 749 v 882 kcal, P<0.001). In the 2009 survey, 15% (1288/8489) of customers reported using the calorie information, and these customers purchased 106 fewer kilocalories than customers who did not see or use the calorie information (757 v 863 kcal, P<0.001). Although no overall decline in calories purchased was observed for the full sample, several major chains saw significant reductions. After regulation, one in six lunchtime customers used the calorie information provided, and these customers made lower calorie choices.

  5. Purchase rates and energy content of nutritionally promoted and traditional fast foods purchased at lunchtime in Australia - a pilot study.

    Science.gov (United States)

    Atkinson, Louise F; Palmer, Michelle A

    2012-03-01

    Nutritionally promoted foods are now available at fast-food establishments. Little is known about their popularity, who is purchasing them, or their impact on dietary intake. Our study aimed to determine: how often nutritionally promoted fast foods were purchased; the demographic characteristics of people purchasing these foods; and if purchasing these foods resulted in reduced energy, and increased vegetable, content of lunches compared with those who purchased traditional fast foods. A survey collecting lunchtime fast-food purchases and demographic details was administered over two months. Nutritionally promoted products included the McDonalds' 'Heart Foundation Tick Approved' range and Subway's 'Six grams of fat or less' range. Energy and vegetable contents were estimated using information from fast-food companies' websites. Differences in demographics, energy and vegetable contents between individuals purchasing nutritionally promoted and traditional lunches were assessed using χ2 and t tests. Queensland, Australia. Lunchtime diners aged over 16 years at Subway and McDonalds. Surveys were collected from 927 respondents (58 % male, median age 25 (range 16-84) years; 73 % response rate). Only 3 % (n 24/910) of respondents who ordered a main option had purchased a nutritionally promoted item. Purchasers of nutritionally promoted foods were ∼13 years older, predominantly female (79 %), and more often reported involvement in a health-related profession (29 % v. 11 %) than purchasers of traditional foods (P < 0·05). Purchasers of nutritionally promoted foods ordered 1·5 fewer megajoules and 0·6 more vegetable servings than purchasers of traditional foods (P < 0·05). Nutritionally promoted fast foods may reduce lunchtime energy content, however these foods were infrequently chosen.

  6. DNA biosynthesis content and intensiveness in mice thymus at early periods following fast neutron irradiation with different energy rate

    International Nuclear Information System (INIS)

    Indyk, V.M.; Antonenko, G.I.; Parnovskaya, N.V.

    1988-01-01

    Biosynthesis of dna of the thymic glands of animals irradiated by fast neutrons with different energy values in the early post-irradiation period is investigated. It is shown that the rate of mass recovery in organs, their cellular nature, dna content and indices of their specific activity have the dose and time dependences, as well as they considerably differ at different neutron energies and different quality radiation. With the increase of neutron energy value their biological effectiveness decreases

  7. Impact of insufficient energy content in the design time history on the structure response

    International Nuclear Information System (INIS)

    Ma, D.C.; Gvildys, J.; Chang, Y.W.; Seidensticker, R.W.

    1989-01-01

    In the design of nuclear power plants, it is often desirable to use the time history method in the soil-structure interaction analysis to determine the plant floor response to seismic loads. Because many design criteria are specified in terms of design response spectra, the artificial time history needs to be generated under the requirement that the response spectra of the artificial history should envelop the given design response spectra. However, recent studies indicate that the artificial time history used in the plant design may have insufficient energy in the frequency range of interest, even though the response spectra of the design time history closely envelop the design response spectra. Therefore, the proposed changes in the NRC Standard Review Plan requires that when a single time history is used in the seismic design, it must satisfy requirements for both response spectra enveloping and matching a power spectra density (PSD) function in the frequency range of interest. The use of multiple artificial time histories (at least five time histories) in the plant design is also suggested in the new Standard Review Plan. This paper presents an investigation of the effects of the insufficient energy content in the design time history on the response of the soil-structure system. Numerical studies were carried out. Both the real earthquake records and the artificial time histories were used as the input motions in a simple lumped-mass soil-structure interaction model. The results obtained from this study provide a better understanding of the effects of the insufficient energy content in the design time history on the structural response. 5 refs., 10 figs., 1 tab

  8. Influence of fermentation temperature on the content of fatty acids in low energy milk-based kombucha products

    Directory of Open Access Journals (Sweden)

    Malbaša Radomir V.

    2011-01-01

    Full Text Available The aim of this study was to investigate the influence of fermentation temperature on the fatty acids content in low energy milk-based products obtained by kombucha inoculums with herbal teas. In this investigation low energy milk-based kombucha products were produced from milk with 0.8% milk fat using 10% (v/v kombucha inoculums cultivated on winter savory, peppermint, stinging nettle and wild thyme. The process of fermentation was conducted at two temperatures: 40°C and 43°C. Fermentation was stopped after the pH value of 4.5 was reached. Duration of the fermentation process was shorter by applying higher fermentation temperature. Fatty acids content was determined by gas chromatography-mass spectrometry. Predominant fatty acids in all obtained products were saturated fatty acids, first of all the monounsaturated ones. The higher temperature resulted in the formation of lower amount of saturated fatty acids in the obtained milk-based kombucha products.

  9. A pilot-scale steam autoclave system for treating municipal solid waste for recovery of renewable organic content: Operational results and energy usage.

    Science.gov (United States)

    Holtman, Kevin M; Bozzi, David V; Franqui-Villanueva, Diana; Offeman, Richard D; Orts, William J

    2016-05-01

    A pilot-scale (1800 kg per batch capacity) autoclave used in this study reduces municipal solid waste to a debris contaminated pulp product that is efficiently separated into its renewable organic content and non-renewable organic content fractions using a rotary trommel screen. The renewable organic content can be recovered at nearly 90% efficiency and the trommel rejects are also much easier to sort for recovery. This study provides the evaluation of autoclave operation, including mass and energy balances for the purpose of integration into organic diversion systems. Several methods of cooking municipal solid waste were explored from indirect oil heating only, a combination of oil and direct steam during the same cooking cycle, and steam only. Gross energy requirements averaged 1290 kJ kg(-1) material in vessel, including the weight of free water and steam added during heating. On average, steam recovery can recoup 43% of the water added and 30% of the energy, supplying on average 40% of steam requirements for the next cook. Steam recycle from one vessel to the next can reduce gross energy requirements to an average of 790 kJ kg(-1). © The Author(s) 2016.

  10. Determination of ash content of coal by mass absorption coefficient measurements at two X-ray energies

    International Nuclear Information System (INIS)

    Fookes, R.A.; Gravitis, V.L.; Watt, J.S.

    1977-01-01

    A method for determining the ash content of coal is proposed. It involves measurements proportional to mass absorption coefficients of coal at two X-ray energies. These measurements can be made using X-ray transmission or scatter techniques. Calculations based on transmission of narrow beams of X-rays have shown that ash can be determined to about 1wt%(1 sigma) in coal of widely varying ash content and composition. Experimentally, ash content was determined to 0.67wt% by transmission techniques and 1.0wt% by backscatter techniques in coal samples from the Bulli seam, NSW, Australia, having ash in the range 11-34wt%. For samples with a much wider range of coal composition (7-53wt% ash and 0-25wt% iron in the ash), ash content was determined by backscatter measurements to 1.62wt%. The method produced ash determinations at least as accurate as those produced by the established technique which compensates for variation in iron content of the ash by X-ray fluorescence analysis for iron. Compared with the established technique, it has the advantage of averaging analysis over much larger volumes of coal, but the disadvantage that much more precise measurements of X-ray intensities are required. (author)

  11. Energy scenarios for Colombia: process and content

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Ricardo A. [National Univ. of Colombia, Escuela de Geosciencias y Medio Ambiente, Medellin (Colombia); Vesga, Daniel R.A. [Unidad de Planeacion Minero Energetica, Bogota (Colombia); Cadena, Angela I. [Los Andes Univ., School of Engineering, Bogota (Colombia); Boman, Ulf [Kairos Future AB, Stockholm (Sweden); Larsen, Erik [Cass Business School, London (United Kingdom); Dyner, Isaac [Universidad Nacional de Colombia, Energy Inst., Medellin (Colombia)

    2005-02-01

    This paper presents the approach undertaken, and the four energy scenarios that have been developed, to support long term energy policy in Colombia. The scenarios were constructed with emphasis on maximum interaction between stakeholders in the Colombian energy sector. The process directly involved over 120 people. The scenarios were developed as strategic support tools for the Energy and Mining Planning Unit (UPME), which is the Colombian institution in charge of developing the country's energy strategies and National Energy Policy. The methodology employed is presented, followed by a detailed description of each of the four scenarios. (Author)

  12. Effects of Post-harvest Storage Duration and Variety on Nutrient Digestibility and Energy Content Wheat in Finishing Pigs

    Directory of Open Access Journals (Sweden)

    P. P. Guo

    2015-10-01

    Full Text Available This study was conducted to investigate the effects of post-harvest storage duration and wheat variety on the digestibility and energy content of new season wheat fed to finishing pigs. Two wheat varieties (Shi and Zhong were harvested in 2013 and stored in the warehouse of the Fengning Pig Experimental Base at China Agricultural University for 3, 6, 9, or 12 mo. For each storage period, 12 barrows were placed in metabolism crates and allotted to diets containing 1 of the 2 wheat varieties in a randomized complete block design. The experimental diets contained 97.34% wheat and 2.66% of a vitamin and trace mineral premix. With an extension of storage duration from 3 mo to 12 mo, the gross energy (GE and crude protein (CP of the wheat decreased by 2.0% and 12.01%, respectively, while the concentration of neutral detergent fiber (NDF, acid detergent fiber (ADF and starch content increased by 30.26%, 19.08%, and 2.46%, respectively. Total non-starch polysaccharide, total arabinose, total xylose and total mannose contents decreased by 46.27%, 45.80%, 41.71%, and 75.66%, respectively. However, there were no significant differences in the chemical composition between the two wheat varieties with the exception of ADF which was approximately 13.37% lower in Shi. With an extension of storage duration from 3 mo to 12 mo, the digestible energy (DE, metabolizable energy (ME content and the apparent total tract digestibility of GE, CP, dry matter, organic matter, ether extract, ADF and metabolizability of energy in wheat decreased linearly (p<0.01 by 5.74%, 7.60%, 3.75%, 3.88%, 3.50%, 2.47%, 26.22%, 27.62%, and 3.94%, respectively. But the digestibility of NDF changed quadratically (p<0.01. There was an interaction between wheat variety and storage time for CP digestibility (p<0.05, such that the CP digestibility of variety Zhong was stable during 9 mo of storage, while the CP digestibility of variety Shi decreased (p<0.05. In conclusion, the GE, DE, and ME

  13. Short-term growth and substrate use in very-low-birth-weight infants fed formulas with different energy contents

    NARCIS (Netherlands)

    J.B. van Goudoever (Hans); E.J. Sulkers; H.N. Lafeber (Harrie); P.J.J. Sauer (Pieter)

    2000-01-01

    textabstractBACKGROUND: Currently available preterm formulas with energy contents of 3350 kJ (800 kcal)/L promote weight and length gain at rates at or above intrauterine growth rates but disproportionately increase total body fat. OBJECTIVE: The objective of this

  14. From water to energy. The virtual water content and water footprint of biofuel consumption in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Elena, Galan-del-Castillo [Universitat Autonoma de Barcelona (Spain); Esther, Velazquez [Pablo de Olavide University, Department of Economics, Crta. Utrera, Km.1, 41013 Seville (Spain)

    2010-03-15

    Energy diversification and the use of renewable energy sources are key points in the European energy strategy. Biofuels are the most popular renewable resource option for the transport sector, and the European Union has established objectives that the Member States must adopt and implement. However, biofuel production at such a scale requires a considerable amount of water resources, and this water-energy nexus is rarely taken into account. This paper shows the strong nexus between water and energy in biofuel production and estimates the virtual water (VW) content and the water footprint (WF) from the raw material production that will be needed to reach the Spanish targets for biofuel consumption by 2010. The results show how the impact of such targets on the global and local water situation could be reduced through virtual water imports and, at the same time, how these imports could increase Spain's water and energy dependence. Hence, in order to manage water from an integral perspective of the territory, the inclusion of biofuel consumption objectives should go hand in hand with measures to reduce the demand of energy in the transport sector. (author)

  15. From water to energy: The virtual water content and water footprint of biofuel consumption in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Galan-del-Castillo, Elena [Universitat Autonoma de Barcelona (Spain); Velazquez, Esther, E-mail: evelalo@upo.e [Pablo de Olavide University, Department of Economics, Crta. Utrera, Km.1, 41013 Seville (Spain)

    2010-03-15

    Energy diversification and the use of renewable energy sources are key points in the European energy strategy. Biofuels are the most popular renewable resource option for the transport sector, and the European Union has established objectives that the Member States must adopt and implement. However, biofuel production at such a scale requires a considerable amount of water resources, and this water-energy nexus is rarely taken into account. This paper shows the strong nexus between water and energy in biofuel production and estimates the virtual water (VW) content and the water footprint (WF) from the raw material production that will be needed to reach the Spanish targets for biofuel consumption by 2010. The results show how the impact of such targets on the global and local water situation could be reduced through virtual water imports and, at the same time, how these imports could increase Spain's water and energy dependence. Hence, in order to manage water from an integral perspective of the territory, the inclusion of biofuel consumption objectives should go hand in hand with measures to reduce the demand of energy in the transport sector.

  16. From water to energy. The virtual water content and water footprint of biofuel consumption in Spain

    International Nuclear Information System (INIS)

    Elena, Galan-del-Castillo; Esther, Velazquez

    2010-01-01

    Energy diversification and the use of renewable energy sources are key points in the European energy strategy. Biofuels are the most popular renewable resource option for the transport sector, and the European Union has established objectives that the Member States must adopt and implement. However, biofuel production at such a scale requires a considerable amount of water resources, and this water-energy nexus is rarely taken into account. This paper shows the strong nexus between water and energy in biofuel production and estimates the virtual water (VW) content and the water footprint (WF) from the raw material production that will be needed to reach the Spanish targets for biofuel consumption by 2010. The results show how the impact of such targets on the global and local water situation could be reduced through virtual water imports and, at the same time, how these imports could increase Spain's water and energy dependence. Hence, in order to manage water from an integral perspective of the territory, the inclusion of biofuel consumption objectives should go hand in hand with measures to reduce the demand of energy in the transport sector. (author)

  17. Numerical Analysis of the Influence of Thermal Mass, Phase Change Materials and Furniture / Indoor Content on Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Dreau, Jerome Le

    2017-01-01

    Many numerical models for building energy simulation assume empty rooms and do not account for the indoor content of occupied buildings. Furnishing elements and indoor items have complicated shapes and are made of various materials. Therefore, most of the people prefer to ignore them. However, th......, it is shown that the integration of phase change materials in wallboards or furniture elements can appreciably improve the energy flexibility of buildings....

  18. Association between body energy content in the dry period and post-calving production disease status in dairy cattle.

    Science.gov (United States)

    Smith, G L; Friggens, N C; Ashworth, C J; Chagunda, M G G

    2017-09-01

    The transition from gestation to lactation is marked by significant physiological changes for the individual cow such that disease incidence is highest in early lactation. Around the time of calving, cows rely on mobilisation of body energy reserves to fill the energy deficit created by an increase in nutrient demands at a time of restricted feed intake. It is well established that monitoring of body energy reserves in lactation is an important component of herd health management. However, despite their influence on future health and productivity, monitoring of body energy reserves in the dry period is often sparse. Further, there is increasing concern that current dry off management is inappropriate for modern cattle and may influence future disease risk. This study aimed to identify candidate indicators of early lactation production disease from body energy data collected in the dry period and production data recorded at the time of dry off. Retrospective analysis was performed on 482 cow-lactations collected from a long-term Holstein-Friesian genetic and management systems project, the Langhill herd in Scotland. Cow-lactations were assigned to one of four health groups based on health status in the first 30 days of lactation. These four groups were as follows: healthy, reproductive tract disorders (retained placenta and metritis), subclinical mastitis and metabolic disorders (ketosis, hypocalcaemia, hypomagnesaemia and left displaced abomasum). ANOVA, employing a GLM was used to determine effects for the candidate indicator traits. Cows which were diagnosed with a reproductive tract disorder in the first 30 days of lactation experienced a significantly greater loss in body energy content, body condition score and weight in the preceding dry period than healthy cows. The rate of change in body energy content during the first 15 days of the dry period was -18.26 MJ/day for cows which developed reproductive tract disorder compared with +0.63 MJ/day for healthy cows

  19. What's the state of energy studies research?: A content analysis of three leading journals from 1999 to 2008

    International Nuclear Information System (INIS)

    D'Agostino, Anthony Louis; Sovacool, Benjamin K.; Trott, Kirsten; Ramos, Catherine Regalado; Saleem, Saleena; Ong, Yanchun

    2011-01-01

    We present the results of a content analysis conducted on 2502 papers written by 5318 authors published between 1999 and 2008 in three leading energy studies journals: Energy Policy, The Energy Journal, and The Electricity Journal. Our study finds that authors were most likely to be male, based in North America, possess a background in science or engineering, and affiliated with a university or research institute. Articles were likely to be written by authors working within disciplinary boundaries and using research methods from an economics/engineering background. The US was the most written about country among papers that adopted a country focus and electricity was the most frequently discussed energy source. Energy markets and public policy instruments were the most popular focus areas. According to these findings, we identify five thematic areas whose further investigation could enhance the energy studies field and increase the policy-relevance of contemporary research.

  20. Energy Analysis of Contention Tree-Based Access Protocols in Dense Machine-to-Machine Area Networks

    Directory of Open Access Journals (Sweden)

    Francisco Vázquez-Gallego

    2015-01-01

    Full Text Available Machine-to-Machine (M2M area networks aim at connecting an M2M gateway with a large number of energy-constrained devices that must operate autonomously for years. Therefore, attaining high energy efficiency is essential in the deployment of M2M networks. In this paper, we consider a dense M2M area network composed of hundreds or thousands of devices that periodically transmit data upon request from a gateway or coordinator. We theoretically analyse the devices’ energy consumption using two Medium Access Control (MAC protocols which are based on a tree-splitting algorithm to resolve collisions among devices: the Contention Tree Algorithm (CTA and the Distributed Queuing (DQ access. We have carried out computer-based simulations to validate the accuracy of the theoretical models and to compare the energy performance using DQ, CTA, and Frame Slotted-ALOHA (FSA in M2M area networks with devices in compliance with the IEEE 802.15.4 physical layer. Results show that the performance of DQ is totally independent of the number of contending devices, and it can reduce the energy consumed per device in more than 35% with respect to CTA and in more than 80% with respect to FSA.

  1. The Effect of Web Assisted Learning with Emotional Intelligence Content on Students' Information about Energy Saving, Attitudes towards Environment and Emotional Intelligence

    Science.gov (United States)

    Ercan, Orhan; Ural, Evrim; Köse, Sinan

    2017-01-01

    For a sustainable world, it is very important for students to develop positive environmental attitudes and to have awareness of energy use. The study aims to investigate the effect of web assisted instruction with emotional intelligence content on 8th grade students' emotional intelligence, attitudes towards environment and energy saving, academic…

  2. Evaluation of material fracture energy by its heat content

    International Nuclear Information System (INIS)

    Frolov, G.A.; Pasichnyj, V.V.; Polezhaev, Yu.V.; Frolov, A.A.; Choba, A.V.

    1986-01-01

    Based on published and experimental data it is shown that there is a simple relationship between the heat of evaporation and heat content. This allows in some instances the evaluation of a rate of material fracture by its content. Experimental and theoretical data for quartz glass ceramics, and glass-reinforced plastic are presented

  3. Seasonal relationships between foliar moisture content, heat content and biochemistry of lodge pole pine and big sagebrush foliage

    Science.gov (United States)

    Yi Qi; Matt Jolly; Philip E. Dennison; Rachael C. Kropp

    2016-01-01

    Wildland fires propagate by liberating energy contained within living and senescent plant biomass. The maximum amount of energy that can be generated by burning a given plant part can be quantified and is generally referred to as its heat content (HC). Many studies have examined heat content of wildland fuels but studies examining the seasonal variation in foliar HC...

  4. Effect of soaking in water and rumen digeta solutions on metabolizable energy content and chemical composition of barley seeds for use in poultry diet.

    Science.gov (United States)

    Tabatabee, S N; Sadeghi, G H; Tabeidian, S A

    2007-03-15

    An experiment was carried out to evaluate the effect of soaking in water and different rumen digesta solutions on nutritional value of dry barley seeds. Treatments were included distilled water as control and rumen digesta that diluted with distilled water to obtain 20, 40 and 60% digesta solutions. Solutions have added to 10 kg of barley seed samples to achieve final 30% moisture content. After 21 days the chemical composition and energy content of barley seed were determined. Gross energy of barley seeds did not affected by different experimental treatments. Use of 20% rumen digesta solution resulted to a significant (pcontent of barley seeds. Barley seed that treated with 40% of rumen digesta solution had highest TME and TMEn content and its different from seeds that treated with 60 and 100% rumen digesta solutions was significant (prumen digesta solutions increased crud protein, ether extract, crude fiber and ash content of barley seeds numerically.

  5. Comparison of Very Low Energy Diet Products Available in Australia and How to Tailor Them to Optimise Protein Content for Younger and Older Adult Men and Women

    Directory of Open Access Journals (Sweden)

    Alice A. Gibson

    2016-09-01

    Full Text Available Very low energy diets (VLED are efficacious in inducing rapid weight loss but may not contain adequate macronutrients or micronutrients for individuals with varying nutritional requirements. Adequate protein intake during weight loss appears particularly important to help preserve fat free mass and control appetite, and low energy and carbohydrate content also contributes to appetite control. Therefore, the purpose of this study was to compare the nutritional content (with a focus on protein, nutritional adequacy and cost of all commercially-available VLED brands in Australia. Nutritional content and cost were extracted and compared between brands and to the Recommended Dietary Intake (RDI or adequate intake (AI of macronutrients and micronutrients for men and women aged 19–70 years or >70 years. There was wide variability in the nutritional content, nutritional adequacy and cost of VLED brands. Most notably, even brands with the highest daily protein content, based on consuming three products/day (KicStart™ and Optislim®, ~60 g/day, only met estimated protein requirements of the smallest and youngest women for whom a VLED would be indicated. Considering multiple options to optimise protein content, we propose that adding pure powdered protein is the most suitable option because it minimizes additional energy, carbohydrate and cost of VLEDs.

  6. Total and regional bone mineral content in healthy Spanish subjects by dual-energy X-ray absorptiometry

    International Nuclear Information System (INIS)

    Aguado Henche, S.; Rodriguez Torres, R.; Clemente de Arriba, C.; Gomez Pellico, L.

    2008-01-01

    This is an observational cross-sectional study. The aim of the present study was to describe and analyze patterns of change in total and regional bone mineral content in relation to age and gender in a sedentary Spanish sample population (from the Community of Madrid). The age range of the sample population was from birth to 80 years. One thousand one hundred twenty healthy subjects were recruited and divided into 16 groups according to age. Each subject underwent whole-body densitometry using dual-energy X-ray absorptiometry. An analysis was made of the amount of bone mineral content (BMC) in the whole body and in different regions: the head, trunk, upper limbs, and lower limbs. Gender differences in mean values for upper limbs and lower limbs are statistically significant between 16 and 70 years of age. For the head and trunk, the mean BMC values show the most significant gender differences between 16 and 25 years of age (p≤0.001). Total bone mineral content (TBMC) and TBMC-to-height ratio show significant gender differences between 16 and 70 years of age. In females, TBMC values increase up to 20 years of age and in males up to 25 years of age. We have determined an evolutionary normal pattern of bone mineral content in urban Spanish people. (orig.)

  7. Total and regional bone mineral content in healthy Spanish subjects by dual-energy X-ray absorptiometry

    Energy Technology Data Exchange (ETDEWEB)

    Aguado Henche, S.; Rodriguez Torres, R.; Clemente de Arriba, C.; Gomez Pellico, L. [Universidad de Alcala, Departamento de Anatomia y Embriologia Humana, Facultad de Medicina, Alcala de Henares, Madrid (Spain)

    2008-11-15

    This is an observational cross-sectional study. The aim of the present study was to describe and analyze patterns of change in total and regional bone mineral content in relation to age and gender in a sedentary Spanish sample population (from the Community of Madrid). The age range of the sample population was from birth to 80 years. One thousand one hundred twenty healthy subjects were recruited and divided into 16 groups according to age. Each subject underwent whole-body densitometry using dual-energy X-ray absorptiometry. An analysis was made of the amount of bone mineral content (BMC) in the whole body and in different regions: the head, trunk, upper limbs, and lower limbs. Gender differences in mean values for upper limbs and lower limbs are statistically significant between 16 and 70 years of age. For the head and trunk, the mean BMC values show the most significant gender differences between 16 and 25 years of age (p{<=}0.001). Total bone mineral content (TBMC) and TBMC-to-height ratio show significant gender differences between 16 and 70 years of age. In females, TBMC values increase up to 20 years of age and in males up to 25 years of age. We have determined an evolutionary normal pattern of bone mineral content in urban Spanish people. (orig.)

  8. Design of an assessment to probe teachers' content knowledge for teaching: An example from energy in high school physics

    Science.gov (United States)

    Etkina, Eugenia; Gitomer, Drew; Iaconangelo, Charles; Phelps, Geoffrey; Seeley, Lane; Vokos, Stamatis

    2018-06-01

    Research into teacher learning and practice over the last three decades shows that the teachers of a specific subject need to possess knowledge that is different from the knowledge of other content experts. Yet this specialized version of content knowledge that teachers need to plan instruction, respond to student ideas, and assess student understanding in real time is a theoretically elusive construct. It is crucial for the fields of precollege teacher preparation, teacher professional education, and postsecondary faculty professional development to (a) clarify the construct that underlies this specialized content knowledge, (b) operationalize it in some domain, (c) measure it in both static contexts and as it is enacted in the classroom, and (d) correlate its presence with "richness" of classroom instruction and its effect on student learning. This paper documents a piece of a multiyear, multi-institutional effort to investigate points (a)-(d) in the domain of energy in the first high school physics course. In particular, we describe the framework that we developed to clarify content knowledge for teaching in the context of high school energy learning. We then outline the process through which we developed, tested, and refined a "paper-and-pencil" assessment administered on a computer and discuss the substantive and psychometric features of several items based on a field test of the final form of the assessment. We choose to discuss these items for a dual purpose: to illustrate the application of our general framework and to present performance findings from a sample of 362 practicing high school teachers of physics.

  9. 10 CFR 451.8 - Application content requirements.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Application content requirements. 451.8 Section 451.8 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION RENEWABLE ENERGY PRODUCTION INCENTIVES § 451.8... metered net electric energy generated and sold during the prior fiscal year by the qualified renewable...

  10. Mineral and water content of A. gigas scales determine local micromechanical properties and energy dissipation mechanisms

    Science.gov (United States)

    Troncoso, Omar P.; Gigos, Florian; Torres, Fernando G.

    2017-11-01

    Arapaima gigas scales are natural laminated composite materials made of individual layers with different degrees of mineralization, accompanied of varying mechanical properties. This natural design provides scales with hardness and flexibility, and can serve as a source of inspiration for the development of new layered composites with a hard surface and flexible base. In this paper, we have carried out cyclic micro-indentation tests on both; the internal and the highly mineralized external surface of air dried and wet scales, in order to assess the variation of their local micromechanical properties with regard to the mineral and water content. The load-penetration (P-h) curves showed that creep takes place throughout the application of a constant force during the micro-indentation tests, confirming the time dependent response of A. gigas scales. A model that accounted for the elastic, plastic and viscous responses of the samples was used to fit the experimental results. The penetration depth during loading and creep, as well as the energy dissipated are dependent on the water content. The used model suggests that the viscous response of the internal layer increases with the water content.

  11. Comparative energy content and amino acid digestibility of barley obtained from diverse sources fed to growing pigs

    Directory of Open Access Journals (Sweden)

    Hong Liang Wang

    2017-07-01

    Full Text Available Objective Two experiments were conducted to determine the content of digestible energy (DE and metabolizable energy (ME as well as the apparent ileal digestibility (AID and standardized ileal digestibility (SID of crude protein (CP and amino acids (AA in barley grains obtained from Australia, France or Canada. Methods In Exp. 1, 18 growing barrows (Duroc×Landrace×Yorkshire; 31.5±3.2 kg were individually placed in stainless-steel metabolism crates (1.4×0.7×0.6 m and randomly allotted to 1 of 3 test diets. In Exp. 2, eight crossbred pigs (30.9±1.8 kg were allotted to a replicate 3×4 Youden Square designed experiment with three periods and four diets. Two pigs received each diet during each test period. The diets included one nitrogen-free diet and three test diets. Results The relative amounts of gross energy (GE, CP, and all AA in the Canadian barley were higher than those in Australian and French barley while higher concentrations of neutral detergent fiber, acid detergent fiber, total dietary fiber, insoluble dietary fiber and β-glucan as well as lower concentrations of GE and ether extract were observed in the French barley compared with the other two barley sources. The DE and ME as well as the SID of histidine, isoleucine, leucine and phenylalanine in Canadian barley were higher (p<0.05 than those in French barley but did not differ from Australian barley. Conclusion Differences in the chemical composition, energy content and the SID and AID of AA were observed among barley sources obtained from three countries. The feeding value of barley from Canada and Australia was superior to barley obtained from France which is important information in developing feeding systems for growing pigs where imported grains are used.

  12. An assessment of morphometric indices, blood chemistry variables and an energy meter as indicators of the whole body lipid content in Micropterus dolomieu, Sander vitreus and Ictalurus punctatus

    Science.gov (United States)

    Mesa, Matthew G.; Rose, Brien P.

    2015-01-01

    The effectiveness of several non-lethal techniques as indicators of total lipid content in smallmouth bass Micropterus dolomieu, walleye Sander vitreus and channel catfish Ictalurus punctatus was investigated. The techniques included (1) the Fulton and relative condition factors, (2) relative mass, (3) plasma indicators of nutritional status (alkaline phosphatase, calcium, cholesterol, protein, triglycerides and glucose) and (4) readings from a hand-held, microwave energy meter. Although simple linear regression analysis showed that lipid content was significantly correlated with several predictor variables in each species, the r2 values for the relations ranged from 0·17 to 0·50 and no single approach was consistent for all species. Only one model, between energy-meter readings and lipid content in I. punctatus, had an r2 value (0·83) high enough to justify using it as a predictive tool. Results indicate that no single variable was an accurate and reliable indicator of whole body lipid content in these fishes, except the energy meter for I. punctatus.

  13. Energy taxation

    International Nuclear Information System (INIS)

    2001-06-01

    This study presents the energy taxation, as an energy policy tool, applied to the fossil fuels and to the electric power. Taxes, tax revenue and taxation in function of the energy content or the carbon content are discussed. Many tables and statistical data illustrate this analysis and allow the comparison with other countries in Europe. (A.L.B.)

  14. Energy Reporting Practices among Top Energy Intensive Industries in Malaysia

    Science.gov (United States)

    Tasrip, N. E.; Mat Husin, N.; Alrazi, B.

    2016-03-01

    This study content analyses the energy content in the corporate report of top 30 Malaysian energy-intensive companies. Motivated by the gap among prior corporate social responsibility and environmental reporting studies in respect of energy, this study provides evidence of Malaysian companies’ initiative to reduce energy consumption. While the evidence suggests that not all 30 companies have reported energy-related information, the findings provide an overview on the response of energy intensive companies in relation to Malaysian government initiatives on energy.

  15. Dual-energy X-ray absorptiometry for the simultaneous determination of Density and Moisture Content in Porous Structural Materials

    DEFF Research Database (Denmark)

    Hansen, Kurt Kielsgaard; Jensen, Signe Kamp; Gerward, Leif

    1999-01-01

    The paper describes the dual-energy x-ray equipment, which consists of a x-ray source, filters and a detector. The x-ray beam can be moved automatically in two dimensions relative to a fixed specimen. The purpose of the equipment is to measure simultaneously the density and moisture content...... in porous materials relevant for the building industry. The theory of dual-energy x-ray absorptiometry (DEXA) is presented. DEXA results on two combinations of aluminium and acrylic plastic are compared with corresponding values calculated from the geometry of the experimental setup. The results from the x......-ray measurements show good agreement with results from the two standard materials which imitate water in a porous material. On this background the dual-energy x-ray absorptiometry measurement principle can be used on porous structural materials....

  16. Identifying Content Knowledge for Teaching Energy: Examples from High School Physics

    Science.gov (United States)

    Robertson, Amy D.; Scherr, Rachel E.; Goodhew, Lisa M.; Daane, Abigail R.; Gray, Kara E.; Aker, Leanna B.

    2017-01-01

    "Content knowledge for teaching" is the specialized content knowledge that teachers use in practice the content knowledge that serves them for tasks of teaching such as revoicing students' ideas, choosing an instructional activity to address a student misunderstanding, and evaluating student statements. We describe a methodology for…

  17. Design of an assessment to probe teachers’ content knowledge for teaching: An example from energy in high school physics

    Directory of Open Access Journals (Sweden)

    Eugenia Etkina

    2018-05-01

    Full Text Available Research into teacher learning and practice over the last three decades shows that the teachers of a specific subject need to possess knowledge that is different from the knowledge of other content experts. Yet this specialized version of content knowledge that teachers need to plan instruction, respond to student ideas, and assess student understanding in real time is a theoretically elusive construct. It is crucial for the fields of precollege teacher preparation, teacher professional education, and postsecondary faculty professional development to (a clarify the construct that underlies this specialized content knowledge, (b operationalize it in some domain, (c measure it in both static contexts and as it is enacted in the classroom, and (d correlate its presence with “richness” of classroom instruction and its effect on student learning. This paper documents a piece of a multiyear, multi-institutional effort to investigate points (a–(d in the domain of energy in the first high school physics course. In particular, we describe the framework that we developed to clarify content knowledge for teaching in the context of high school energy learning. We then outline the process through which we developed, tested, and refined a “paper-and-pencil” assessment administered on a computer and discuss the substantive and psychometric features of several items based on a field test of the final form of the assessment. We choose to discuss these items for a dual purpose: to illustrate the application of our general framework and to present performance findings from a sample of 362 practicing high school teachers of physics.

  18. [The energy density and the nutritional quality of diet depending on their sugar content].

    Science.gov (United States)

    Martínez Álvarez, Jesús Román

    2013-07-01

    Sugar content in foods cannot be distinguished from added sugar, although it is true that this added sugar brings mainly energy and no other essential nutrients. On the other hand, in the context of diet, sugar helps make it more varied and palatable allowing including foods that may otherwise not be would consume, thus indirectly contributing to the intake of other nutrients. Having interest in knowing the possible relationship between a high intake of sugars and the decrease in micronutrients intake, we noted that the nutrient density of the diet might be influenced by factors such as the high presence of sugar added to food. It seems that this nutritional dilution produced by adding sugar to food is, in general, not very significant and, often, offset by the fortification in micronutrients that we usually can find in many sugary products. After a detailed analysis of the published studies on the subject, it has been found that there is no a clear evidence of the hypothetical micronutrient dilution that would occur by adding sugar to the diet. On the other hand, given that the addition of sugar to the diet doesn't seem to report any remarkable advantages from the point of view of the intake of micronutrients; It seems reasonable to promote a moderate consumption of foods and sugary drinks, so in that way, they become an important extra energy source. It should also be borne in mind that the addition of sugar to the diet does not seem remarkable report any advantage in terms of intake of micronutrients. For this reason, it seems logical that the consumption of sugary food and sweet drinks will be moderate given the ease of consumption and the likelihood of their becoming a major source of energy. Finally, it is concluded on the need for further research on the mechanisms underlying that, up to now showed no, possible displacement of micro-nutrients and other food components of the diet that could occur in cases of consumption of foods with a high sugar content, as

  19. Effects of acidity on the energy content of Folsomia candida (Collembola) and Oniscus asellus (Isopoda). Der Einfluss von Saeurestress auf die Energiegehalte von Folsomia candida (Collembola) und Oniscus asellus (Isopoda)

    Energy Technology Data Exchange (ETDEWEB)

    Gerdsmeier, J.; Greven, H. (Duesseldorf Univ. (Germany, F.R.). Zoologisches Inst.)

    1989-01-01

    Microbomb calorimetry according to Phillipson was used to determine the energy content of Folsomia candida (Collembola) and Oniscus asellus (Isopoda) both kept on neutral (pH 7.0) and acidified (pH 2.0 and 3.0) sea sand for various periods. The energy content of F. candida ranged between 4.968 and 5.847 cal/mg dry weight and of O. asellus between 3.305 and 4.192 cal/mg dry weight. Energy content of O. asellus kept at pH 2 and 3 was significantly lower than of those kept at pH 7. This could not be detected in F. candida, which result is supported also by protein determination. (orig.).

  20. Numerical analysis of the influence of thermal mass, phase change materials and furniture / indoor content on building energy flexibility (long abstract)

    DEFF Research Database (Denmark)

    Johra, Hicham

    investigating the influence of the different types of thermal inertia on buildings energy flexibility. Although the insulation level and thermal mass of a building envelope are the dominant parameters, it appears that indoor content cannot be neglected for lightweight structure building simulations. Finally...

  1. Effect of electrode contact area on the information content of the recorded electrogastrograms: An analysis based on Rényi entropy and Teager-Kaiser Energy

    Science.gov (United States)

    Alagumariappan, Paramasivam; Krishnamurthy, Kamalanand; Kandiah, Sundravadivelu; Ponnuswamy, Mannar Jawahar

    2017-06-01

    Electrogastrograms (EGG) are electrical signals originating from the digestive system, which are closely correlated with its mechanical activity. Electrogastrography is an efficient non-invasive method for examining the physiological and pathological states of the human digestive system. There are several factors such as fat conductivity, abdominal thickness, change in electrode surface area etc, which affects the quality of the recorded EGG signals. In this work, the effect of variations in the contact area of surface electrodes on the information content of the measured electrogastrograms is analyzed using Rényi entropy and Teager-Kaiser Energy (TKE). Two different circular cutaneous electrodes with approximate contact areas of 201.14 mm2 and 283.64 mm2, have been adopted and EGG signals were acquired using the standard three electrode protocol. Further, the information content of the measured EGG signals were analyzed using the computed values of entropy and energy. Results demonstrate that the information content of the measured EGG signals increases by 6.72% for an increase in the contact area of the surface electrode by 29.09%. Further, it was observed that the average energy increases with increase in the contact surface area. This work appears to be of high clinical significance since the accurate measurement of EGG signals without loss in its information content, is highly useful for the design of diagnostic assistance tools for automated diagnosis and mass screening of digestive disorders.

  2. Comparative energy content and amino acid digestibility of barley obtained from diverse sources fed to growing pigs.

    Science.gov (United States)

    Wang, Hong Liang; Shi, Meng; Xu, Xiao; Ma, Xiao Kang; Liu, Ling; Piao, Xiang Shu

    2017-07-01

    Two experiments were conducted to determine the content of digestible energy (DE) and metabolizable energy (ME) as well as the apparent ileal digestibility (AID) and standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in barley grains obtained from Australia, France or Canada. In Exp. 1, 18 growing barrows (Duroc×Landrace×Yorkshire; 31.5±3.2 kg) were individually placed in stainless-steel metabolism crates (1.4×0.7×0.6 m) and randomly allotted to 1 of 3 test diets. In Exp. 2, eight crossbred pigs (30.9±1.8 kg) were allotted to a replicate 3×4 Youden Square designed experiment with three periods and four diets. Two pigs received each diet during each test period. The diets included one nitrogen-free diet and three test diets. The relative amounts of gross energy (GE), CP, and all AA in the Canadian barley were higher than those in Australian and French barley while higher concentrations of neutral detergent fiber, acid detergent fiber, total dietary fiber, insoluble dietary fiber and β-glucan as well as lower concentrations of GE and ether extract were observed in the French barley compared with the other two barley sources. The DE and ME as well as the SID of histidine, isoleucine, leucine and phenylalanine in Canadian barley were higher (penergy content and the SID and AID of AA were observed among barley sources obtained from three countries. The feeding value of barley from Canada and Australia was superior to barley obtained from France which is important information in developing feeding systems for growing pigs where imported grains are used.

  3. Microgrids project. Part 2. Design of an electrification kit with high content of renewable energy sources in Senegal

    Energy Technology Data Exchange (ETDEWEB)

    Alzola, J.A.; Santos, M. [Robotiker Tecnalia, Parque Tecnologico, Edificio 202, 48170 Zamudio (Spain); Vechiu, I. [ESTIA Recherche Technopole Izarbel, 64210 Bidart (France); Camblong, H. [ESTIA Recherche Technopole Izarbel, 64210 Bidart (France); Electrical Engineering Department, University of the Basque Country (E.U.P.-D), Europa Plaza 1, 20018 Donostia - San Sebastian (Spain); Sall, M. [Centre d' Etudes et de Recherches sur les Energies Renouvelables (UCAD) (Senegal); Sow, G. [Laboratoire des Energies Renouvelables (LER), Ecole Sup. Polytechnique, Dakar (Senegal)

    2009-10-15

    Senegal is one of the less developed countries in the world (position 158 in a list of 174 countries). 85% of its rural population does not have access to electricity and there's no doubt that this is an important barrier for socio-economic development. In this context, the project Microgrids aims at contributing to solve this problem. This project is part of the Intelligent Energy - Europe Programme supported by the European Commission. Its objective is the promotion and dissemination of the use of micro-grids with high content of Renewable Energy Sources (RES) for the electrification of villages far away from the grid in Senegal. One of the results of the project was the analysis of rural electrification needs, which is described in another paper [Camblong H, Sarr J, Niang AT, Curea O, Alzola JA, Sylla EH, Santos M. Microgrids project, part 1: analysis of rural electrification with high content of renewable energy sources in Senegal. Renewable Energy, submitted for publication.]. This paper presents the design of an electrification kit based on the information provided by that analysis [Analyse des besoins locaux pour l'electrification de zones rurales au Senegal. Technical report of Microgrids project; 2007. Available from: http://www.microgrids-eie.com.]. After identifying necessary previous conditions for the sustainability of any electrification project, a methodology is proposed for the design of the electrification kit. This methodology is applied to a typical village and results are extended to differently sized villages in the areas of Thies, Fatick and Kaolack. Economic considerations are also included to establish the relationship between electrification costs and paying capability of the communities. Now the Microgrids' consortium hopes to set-up a new project to apply the designed kit on some rural non-electrified villages. (author)

  4. CNF1 Enhances Brain Energy Content and Counteracts Spontaneous Epileptiform Phenomena in Aged DBA/2J Mice.

    Directory of Open Access Journals (Sweden)

    Sara Travaglione

    Full Text Available Epilepsy, one of the most common conditions affecting the brain, is characterized by neuroplasticity and brain cell energy defects. In this work, we demonstrate the ability of the Escherichia coli protein toxin cytotoxic necrotizing factor 1 (CNF1 to counteract epileptiform phenomena in inbred DBA/2J mice, an animal model displaying genetic background with an high susceptibility to induced- and spontaneous seizures. Via modulation of the Rho GTPases, CNF1 regulates actin dynamics with a consequent increase in spine density and length in pyramidal neurons of rat visual cortex, and influences the mitochondrial homeostasis with remarkable changes in the mitochondrial network architecture. In addition, CNF1 improves cognitive performances and increases ATP brain content in mouse models of Rett syndrome and Alzheimer's disease. The results herein reported show that a single dose of CNF1 induces a remarkable amelioration of the seizure phenotype, with a significant augmentation in neuroplasticity markers and in cortex mitochondrial ATP content. This latter effect is accompanied by a decrease in the expression of mitochondrial fission proteins, suggesting a role of mitochondrial dynamics in the CNF1-induced beneficial effects on this epileptiform phenotype. Our results strongly support the crucial role of brain energy homeostasis in the pathogenesis of certain neurological diseases, and suggest that CNF1 could represent a putative new therapeutic tool for epilepsy.

  5. Effects of catecholamines on rat myocardial metabolism. I. Influence of catecholamines on energy-rich nucleotides and phosphorylated fraction contents.

    Science.gov (United States)

    Merouze, P; Gaudemer, Y

    1975-01-01

    1. The influence of catecholamines (adrenaline and noradrenaline) on energy metabolism of the rat myocardium has been studied by incubating slices of this tissue with these hormones and by following the levels of the different phosphorylated fractions and adenylic nucleotides. 2. Similar effects are obtained with both hormones, adrenaline being more effective. 3. Catecholamines decrease significantly the total amount of phosphate while Pi content increases during the first 10 minutes of incubation; labile and residual phosphate contents increase at the beginning of incubation and decrease to the initial values afterwards. 4. ATP and ADP levels decrease significantly with both hormones; however, the effect of noradrenalin on the ATP level needs a longer time of incubation. The ATP/ADP ratios decrease after 5 minutes incubation and the total adenylic nucleotide content is severely decreased (35 per cent with adrenalin, after 20 minutes incubation). 5. Similar results have been obtained with other tissues; these results can explain the decrease of aerobic metabolism we observed under the same conditions.

  6. Measurements of moisture content in wood fuels with dual energy x-ray; Maetning av fukt i biobraenslen med dubbelenergiroentgen

    Energy Technology Data Exchange (ETDEWEB)

    Nordell, Anders [Industriellt Utvecklingscentrum i Karlskoga, Karlskoga (Sweden); Vikterloef, K J [Oerebro Radiofysik AB, Oerebro (Sweden)

    2000-04-01

    some of the mixed fuels. Provided that the main category is known the moisture content can be determined within one or two percent from the measurements. A complication is that the procedure requires that the fuel type be known. The method offers a relative measurement which means that it relies on calibration against known references. Different types of fuels therefore to some extent need different calibrations. This is basically due to the differences in carbon content which affects the result. With a further development of the method there are ways to overcome this difference in the total absorption resulting in a measurement more or less independent of the fuel type. As the content of carbon as well as of oxygen strongly affects the absorption, one would also in principle be able to calculate the heat content of the fuel. On top of that there is a correlation of the absorption to the mineral content, which opens a possibility to calculate the amount of ash in the material. To reveal these for biofuels highly interesting parameters a substantial effort of software development in the data treatment is required. A fine-tuning of the x-ray energies is also desirable to reach a higher signal ratio for the case moisture in wood, compared to what is possible with the medical equipment. These development steps are regarded fully feasible and are recommended to be taken in the coming work.

  7. Determining gold content

    International Nuclear Information System (INIS)

    Clayton, C.G.; Wormald, M.R.

    1981-01-01

    A method for determining the gold content of a material, comprises irradiating a body of the material with neutrons and determining the intensity of γ-rays having an energy of 279 keV arising from the reaction 179 Au(nn') 179 Au → 279 keV. The apparatus has means for conveying the materials past an assembly, which has a neutron source, which does not produce neutrons having sufficient energy to excite fast neutron reactions in non-auriferous constituents. (author)

  8. Use of supermarket receipts to estimate energy and fat content of food purchased by lean and overweight families.

    Science.gov (United States)

    Ransley, J K; Donnelly, J K; Botham, H; Khara, T N; Greenwood, D C; Cade, J E

    2003-10-01

    The aim of this study was to compare the energy and fat content of food purchased for home consumption by households comprising mainly overweight individuals (OH), with those comprising mainly lean individuals (LH). 214 supermarket shoppers and their household were recruited from a Tesco supermarket in Leeds (UK). Households collected supermarket receipts and completed a shopping diary for 28-days, and each member of the household completed a 4-day food record. OH purchased food higher in fat (38% total energy from fat) than LH, (34.9%: p=0.001) and they purchased more energy and fat per adult equivalent, per day than LH (10.05 MJ compared to 9.15 MJ: p=0.01 and 103 g compared to 86 g:p=0.001). Households were 15% more likely to be classified as OH for each additional MJ of energy purchased per person, per day, after adjusting for number of children, household size, age, sex and social class. It was concluded that food purchasing behaviour may be linked to the prevalence of obesity in households who shop at supermarkets.

  9. Estimation of Moisture Content in Coal in Coal Mills

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Mataji, B.

    the moisture content of the coal is proposed based on a simple dynamic energy model of a coal mill, which pulverizes and dries the coal before it is burned in the boiler. An optimal unknown input observer is designed to estimate the moisture content based on an energy balance model. The designed moisture...

  10. Estimation of Moisture Content in Coal in Coal Mills

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Mataji, Babak

    2006-01-01

    the moisture content of the coal is proposed based on a simple dynamic energy model of a coal mill, which pulverizes and dries the coal before it is burned in the boiler. An optimal unknown input observer is designed to estimate the moisture content based on an energy balance model. The designed moisture...

  11. Prediction of digestible and metabolizable energy content and standardized ileal amino Acid digestibility in wheat shorts and red dog for growing pigs.

    Science.gov (United States)

    Huang, Q; Piao, X S; Ren, P; Li, D F

    2012-12-01

    Two experiments were conducted to evaluate the effects of chemical composition of wheat shorts and red dog on energy and amino acid digestibility in growing pigs and to establish prediction models to estimate their digestible (DE) and metabolizable (ME) energy content and as well as their standardized ileal digestible (SID) amino acid content. For Exp. 1, sixteen diets were fed to thirty-two growing pigs according to a completely randomized design during three successive periods. The basal diet was based on corn and soybean meal while the other fifteen diets contained 28.8% wheat shorts (N = 7) or red dog (N = 8), added at the expense of corn and soybean meal. Over the three periods, each diet was fed to six pigs with each diet being fed to two pigs during each period. The apparent total tract digestibility (ATTD) of energy in wheat shorts and red dog averaged 75.1 and 87.9%. The DE values of wheat shorts and red dog averaged 13.8 MJ/kg (range 13.1 to 15.0 MJ/kg) and 15.1 MJ/kg (range 13.3 to 16.6 MJ/kg) of dry matter, respectively. For Exp. 2, twelve growing pigs were allotted to two 6×6 Latin Square Designs with six periods. Ten of the diets were formulated based on 60% wheat shorts or red dog and the remaining two diets were nitrogen-free diets based on cornstarch and sucrose. Chromic oxide (0.3%) was used as an indigestible marker in all diets. There were no differences (p>0.05) in SID values for the amino acids in wheat shorts and red dog except for lysine and methionine. Apparent ileal digestibility (AID) and SID values for lysine in different sources of wheat shorts or red dog, which averaged 78.1 and 87.8%, showed more variation than either methionine or tryptophan. A stepwise regression was performed to establish DE, ME and amino acid digestibility prediction models. Data indicated that fiber content and amino acid concentrations were good indicators to predict energy values and amino acid digestibility, respectively. The present study confirms the large

  12. ENERGY CONTENT AND PROPAGATION IN TRANSVERSE SOLAR ATMOSPHERIC WAVES

    Energy Technology Data Exchange (ETDEWEB)

    Goossens, M.; Van Doorsselaere, T. [Centre for mathematical Plasma Astrophysics, Mathematics Department, Celestijnenlaan 200B bus 2400, B-3001 Heverlee (Belgium); Soler, R. [Solar Physics Group, Departament de Fisica, Universitat de les Illes Balears, E-07122 Palma de Mallorca (Spain); Verth, G., E-mail: tom.vandoorsselaere@wis.kuleuven.be [Solar Physics and Space Plasma Research Centre (SP2RC), School of Mathematics and Statistics, University of Sheffield, Hounsfield Road, Hicks Building, Sheffield S3 7RH (United Kingdom)

    2013-05-10

    Recently, a significant amount of transverse wave energy has been estimated propagating along solar atmospheric magnetic fields. However, these estimates have been made with the classic bulk Alfven wave model which assumes a homogeneous plasma. In this paper, the kinetic, magnetic, and total energy densities and the flux of energy are computed for transverse MHD waves in one-dimensional cylindrical flux tube models with a piecewise constant or continuous radial density profile. There are fundamental deviations from the properties for classic bulk Alfven waves. (1) There is no local equipartition between kinetic and magnetic energy. (2) The flux of energy and the velocity of energy transfer have, in addition to a component parallel to the magnetic field, components in the planes normal to the magnetic field. (3) The energy densities and the flux of energy vary spatially, contrary to the case of classic bulk Alfven waves. This last property has the important consequence that the energy flux computed with the well known expression for bulk Alfven waves could overestimate the real flux by a factor in the range 10-50, depending on the flux tube equilibrium properties.

  13. What's on the menu? A review of the energy and nutritional content of US chain restaurant menus.

    Science.gov (United States)

    Wu, Helen W; Sturm, Roland

    2013-01-01

    The present study aimed to (i) describe the availability of nutrition information in major chain restaurants, (ii) document the energy and nutrient levels of menu items, (iii) evaluate relationships with restaurant characteristics, menu labelling and trans fat laws, and nutrition information accessibility, and (iv) compare energy and nutrient levels against industry-sponsored and government-issued nutrition criteria. Descriptive statistics and multivariate regression analysis of the energy, total fat, saturated fat, trans fat, sodium, carbohydrate and protein levels of 29 531 regular and 1392 children's menu items [corrected]. Energy and nutrition information provided on restaurant websites or upon request, and secondary databases on restaurant characteristics. The top 400 US chain restaurants by sales, based on the 2009 list of the Restaurants & Institutions magazine. Complete nutrition information was reported for 245 (61 %) restaurants. Appetizers had more energy, fat and sodium than all other item types. Children's menu specialty beverages had more fat, saturated fat and carbohydrates than comparable regular menu beverages. The majority of main entrées fell below one-third of the US Department of Agriculture's estimated daily energy needs, but as few as 3 % were also within limits for sodium, fat and saturated fat. Main entrées had significantly more energy, fat and saturated fat in family-style restaurants than in fast-food restaurants. Restaurants that made nutrition information easily accessible on websites had significantly lower energy, fat and sodium contents across menu offerings than those providing information only upon request. The paper provides a comprehensive view of chain restaurant menu nutrition prior to nationwide labelling laws. It offers baseline data to evaluate how restaurants respond after laws are implemented.

  14. [Quantitative image of bone mineral content--dual energy subtraction in a single exposure].

    Science.gov (United States)

    Katoh, T

    1990-09-25

    A dual energy subtraction system was constructed on an experimental basis for the quantitative image of bone mineral content. The system consists of a radiography system and an image processor. Two radiograms were taken with dual x-ray energy in a single exposure using an x-ray beam dichromized by a tin filter. In this system, a film cassette was used where a low speed film-screen system, a copper filter and a high speed film-screen system were layered on top of each other. The images were read by a microdensitometer and processed by a personal computer. The image processing included the corrections of the film characteristics and heterogeneity in the x-ray field, and the dual energy subtraction in which the effect of the high energy component of the dichromized beam on the tube side image was corrected. In order to determine the accuracy of the system, experiments using wedge phantoms made of mixtures of epoxy resin and bone mineral-equivalent materials in various fractions were performed for various tube potentials and film processing conditions. The results indicated that the relative precision of the system was within +/- 4% and that the propagation of the film noise was within +/- 11 mg/cm2 for the 0.2 mm pixels. The results also indicated that the system response was independent of the tube potential and the film processing condition. The bone mineral weight in each phalanx of the freshly dissected hand of a rhesus monkey was measured by this system and compared with the ash weight. The results showed an error of +/- 10%, slightly larger than that of phantom experiments, which is probably due to the effect of fat and the variation of focus-object distance. The air kerma in free air at the object was approximately 0.5 mGy for one exposure. The results indicate that this system is applicable to clinical use and provides useful information for evaluating a time-course of localized bone disease.

  15. Numerical Analysis of the Impact of Thermal Inertia from the Furniture / Indoor Content and Phase Change Materials on the Building Energy Flexibility

    DEFF Research Database (Denmark)

    Johra, Hicham; Heiselberg, Per Kvols; Le Dréau, Jérôme

    investigating the influence of the different types of thermal inertia on buildings energy flexibility. Although the insulation level and thermal mass of a building envelope are the dominant parameters, it appears that indoor content cannot be neglected for lightweight structure building simulations. Finally...

  16. Serve Size and Estimated Energy and Protein Contents of Meals Prepared by 'Meals on Wheels' South Australia Inc.: Findings from a Meal Audit Study.

    Science.gov (United States)

    Arjuna, Tony; Miller, Michelle; Soenen, Stijn; Chapman, Ian; Visvanathan, Renuka; Luscombe-Marsh, Natalie D

    2018-02-20

    An audit of 'standard' (STD) and 'energy and protein fortified' (HEHP) meals from Meals on Wheels (MOW) South Australia's summer menu was conducted to evaluate the consistency, and serve size and nutrient contents, of their menu items. Twenty soups, 20 mains and 20 desserts from each of the STD and HEHP menus were prepared at the MOW South Australia's kitchen and delivered to three 'sham(dummy)-clients' over a 5-week period. Each meal component was weighed in triplicate, to the nearest gram, the variation within the serve weight was calculated, and the overall energy and protein content of each meal was determined using FoodWorks (Xyris Software, Highgate Hill, Queensland, Australia). On average, the variability for soups and mains was ≤6% and for desserts was ≤10% and although the measured serve sizes of the MOW meals were consistently smaller than prescribed serve size, the differences were minor. As a percentage of recommended daily intakes (RDIs) for adults aged over 60 years, we calculated that the STD meals contained 21-39% for energy and 42-63% for protein while the HEHP meals contained 29-55% for energy and 46-69% for protein. These findings demonstrate that MOW meals currently meet the voluntary meal guidelines for energy and protein.

  17. Analysis of the effect of gallium content on the magnetomechanical behavior of single-crystal FeGa alloys using an energy-based model

    International Nuclear Information System (INIS)

    Atulasimha, Jayasimha; Flatau, Alison B; Cullen, James R

    2008-01-01

    The magnetomechanical behavior of single-crystal iron–gallium alloys with varying gallium content was found to be strongly dependent on the Ga content (Atulasimha 2006 PhD Thesis). An energy-based model (Atulasimha 2006 PhD Thesis, Armstrong and William 1997 J. Appl. Phys. 81 2321) is employed to simulate the strikingly different actuation behavior (λ–H and B–H curves under different compressive stresses) and validated against experimental data for 19, 24.7 and 29 at.% Ga, [100] oriented, slow-cooled single-crystal FeGa alloys. The effect of gallium content on the model parameters, specifically the cubic magnetocrystalline anisotropy constants and the Armstrong-smoothing factor Ω, their physical significance and ultimately their effect on the magnetomechanical behavior are analyzed and explained

  18. Energy fiscality

    International Nuclear Information System (INIS)

    2001-07-01

    This report gives a general presentation of energy fiscality in France: taxes on energy, mechanisms of stabilization of government's fiscal incomes in case of significant oil prices change, some particularities of energy taxes, the fiscality according to the energy content and according to the carbon content. The fiscality of petroleum products (automotive fuels and other products), natural gas and electricity in France is presented in appendixes together with a comparison of the fiscality in use in the rest of Europe (automotive fuels, domestic fuels, natural gas and electricity for domestic use and for industrial use). (J.S.)

  19. On the Non-Thermal Energy Content of Cosmic Structures

    Directory of Open Access Journals (Sweden)

    Franco Vazza

    2016-11-01

    Full Text Available (1 Background: the budget of non-thermal energy in galaxy clusters is not well constrained, owing to the observational and theoretical difficulties in studying these diluted plasmas on large scales; (2 Method: we use recent cosmological simulations with complex physics in order to connect the emergence of non-thermal energy to the underlying evolution of gas and dark matter; (3 Results: the impact of non-thermal energy (e.g., cosmic rays, magnetic fields and turbulent motions is found to increase in the outer region of galaxy clusters. Within numerical and theoretical uncertainties, turbulent motions dominate the budget of non-thermal energy in most of the cosmic volume; (4 Conclusion: assessing the distribution non-thermal energy in galaxy clusters is crucial to perform high-precision cosmology in the future. Constraining the level of non-thermal energy in cluster outskirts will improve our understanding of the acceleration of relativistic particles and of the origin of extragalactic magnetic fields.

  20. Probing the density content of the nuclear symmetry energy

    Indian Academy of Sciences (India)

    Abstract. The nature of equation of state for the neutron star matter is crucially governed by the density dependence of the nuclear symmetry energy. We attempt to probe the behaviour of the nuclear symmetry energy around the saturation density by exploiting the empirical values for volume and surface symmetry energy ...

  1. State and performance of on-stream ash content determination in lignite and black coal using 2-energy transmission technique

    International Nuclear Information System (INIS)

    Thuemmel, H.W.; Koerner, G.; Leonhardt, J.

    1986-01-01

    The total r.m.s. ash error of the 2-energy transmission on-stream ash gauges KRAS-2 (CIIRR, GDR) and SIROASH (Australia) are 4 weight percentage for raw lignite and 0.5 weight percentage for black coal, respectively. A detailed error analysis shows that this difference is due to the high water content and to strong variations in the ash composition of raw lignite. Both gauges show essentially the same radiometric performance. (author)

  2. Dissociation of the effects of preload volume and energy content on subjective appetite and food intake.

    Science.gov (United States)

    Gray, Richard; French, Stephen; Robinson, Tristan; Yeomans, Martin

    2002-05-01

    Previous research suggests that enhancing the volume of a food preload without altering energy content can result in reduced appetite, although the limited evidence means that the conditions under which this effect will occur are not yet clear. In the present study, we used a Universal Eating Monitor (UEM) to record test meal intake constantly, in parallel with appetite ratings, following soup-based preloads that varied both in volume (150 vs. 450 ml) and energy density (1.4 vs. 4.2 kJ/ml). Healthy young men (n=20) received four different preload conditions (repeated measures) followed by unlimited hot pasta test meals (interval 30 min). They completed appetite ratings during and after each laboratory session, and food diaries for the afternoon and evening following each session. Subjective appetite after the preloads was reduced by the high-volume preloads relative to low-volume preloads, with no difference between the two at each volume level. This indicates an effect of volume, but no effect of energy. Test meal intake in the high-volume, high-energy-density condition was reduced relative to the other conditions, which did not differ from one another. This indicates an effect of total energy, but no effect of volume. The dissociation between these different measures of appetite might be explained in terms of largely cognitive influences on subjective appetite between preload and test meal, contrasted with stronger physiological influences on actual intake during the test meal. With regard to previous studies, it is argued that food volume is more influential under circumstances where gastric volume is closer to its normal limits.

  3. What is the manner of gastric emptying after ingestion of liquids with differences in the volume under uniform glucose-based energy content?

    Science.gov (United States)

    Okabe, Tadashi; Terashima, Hideo; Sakamoto, Atsuhiro

    2017-10-01

    We previously demonstrated that the gastric emptying rate of liquids chiefly depended on the total amount of calories (energy content) in a uniform volume. The aim of the present study was to examine the effects of different volumes of liquids with a uniform energy content on gastric emptying. Three types of test solutions were prepared with a uniform amount of calories (200 kcal provided by glucose) and step-wise increments in volume (200 ml, 400 ml, and 600 ml). The gastric volume of each solution was determined by ultrasound measurements of the gastric antral cross-sectional area after their ingestion by 8 healthy volunteers. The mean gastric volume decreased exponentially to nearly 0 ml 70 min after ingestion in the 200 ml group, 90 min in the 400 ml group, and 100 min in the 600 ml group. Each gastric emptying curve converged with identical slopes on the graph when the points at which the gastric emptying curves of the 200 ml and 400 ml groups reached the zero point on the Y-axis (mean gastric volume) were shifted toward 110 min on the X-axis (time scale). The volume of liquid ingested with a uniform glucose-based energy content is a critical determinant of liquid gastric emptying. The gastric emptying time may be predicted following the ingestion of an isocaloric liquid with any volume over a predefined range once a gastric emptying curve following the ingestion of a liquid has been plotted on a graph. UMIN000014930. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  4. Ocean heat content and ocean energy budget: make better use of historical global subsurface temperature dataset

    Science.gov (United States)

    Cheng, L.; Zhu, J.

    2016-02-01

    Ocean heat content (OHC) change contributes substantially to global sea level rise, also is a key metric of the ocean/global energy budget, so it is a vital task for the climate research community to estimate historical OHC. While there are large uncertainties regarding its value, here we review the OHC calculation by using the historical global subsurface temperature dataset, and discuss the sources of its uncertainty. The presentation briefly introduces how to correct to the systematic biases in expendable bathythermograph (XBT) data, a alternative way of filling data gaps (which is main focus of this talk), and how to choose a proper climatology. A new reconstruction of historical upper (0-700 m) OHC change will be presented, which is the Institute of Atmospheric Physics (IAP) version of historical upper OHC assessment. The authors also want to highlight the impact of observation system change on OHC calculation, which could lead to bias in OHC estimates. Furthermore, we will compare the updated observational-based estimates on ocean heat content change since 1970s with CMIP5 results. This comparison shows good agreement, increasing the confidence of the climate models in representing the climate history.

  5. Effects of dietary energy content on the voluntary feed intake and blood parameters of sea bass (Dicentrarchus labrax L.

    Directory of Open Access Journals (Sweden)

    Domenico Lanari

    2010-01-01

    Full Text Available Energy and protein requirements of sea bass for maximum growth and fasting energy requirements were determined byusing three diets containing increasing DE levels and two fish weights.Five hundred and sixteen sea bass were divided in two body weight (BW classes (A: 67.7 ± 0.85g and B: 128.6 ± 0.88g,mean ± SD live weight and randomly distributed among 24 tanks. They were fed for 12 weeks on three isoproteic dietscharacterized by different levels of digestible energy (DE: low energy (LE, 18.6; medium energy (ME, 19.7; and highenergy (HE, 22.6 MJ kg-1 dry matter (DM. The entire trial lasted 113 d and was divided into two periods: a feeding trialof 83 d and a fasting trial of 30 d. Specific growth rates decreased in fish fed on the HE diet (P weighing 68 g. Voluntary feed intakes and feed conversion ratios were inversely related to dietary energy contents in bothweight classes. During the starvation trial, body depletion increased (Pfeeding experiment. The gross energy requirements (per day for maximum growth were 320 and 221 kJ kg-1 BW for fishweighing 68 g and 128 g, respectively. Fasting metabolisms were 60.6 and 54.1 kJ kg–0.83 BW per day for fish weighing 68gand 128g, respectively.It is concluded that growth performance of sea bass appear to be dependent on digestible dietary energy. Gross energyintake, net energy (production and maintenance requirements of fish were not influenced by dietary treatments.

  6. Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue.

    Directory of Open Access Journals (Sweden)

    Jamil Cappelli

    Full Text Available Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of cortical thickness, 27% reduction in impact energy, and 10% reduction in work to peak force. Starting for this observation, we experimentally studied the effects of manganese supplementation in adults and yearling (yearlings red deer under a balanced diet. Subjects were 29 deer of different age classes (adult n = 19, yearlings n = 10 that were divided in a manganese injected group (n = 14 and a control group (n = 15. Antler content in ashes and minerals, intrinsic mechanical properties and cross section structure were examined at 4 points along the antler beam. A one way ANOVA (mean per antler showed that in yearlings, manganese supplementation only increased its content and that of Fe. However, in adults, Mn supplementation increased the mean content per antler of Ca, Na, P, B, Co, Cu, K, Mn, Ni, Se (while Si content was reduced, and impact work but not Young's modulus of elasticity, bending strength or work to peak force. A GLM series on characteristics in the uppermost part examined in the antler, often showing physiological exhaustion and depletion of body stores, showed also a 16% increase in work to peak force in the antlers of the treated group. Thus, manganese supplementation altered mineral composition of antler and improved structure and some mechanical properties despite animals having a balanced diet.

  7. Manganese Supplementation in Deer under Balanced Diet Increases Impact Energy and Contents in Minerals of Antler Bone Tissue.

    Science.gov (United States)

    Cappelli, Jamil; Garcia, Andrés; Ceacero, Francisco; Gomez, Santiago; Luna, Salvador; Gallego, Laureano; Gambin, Pablo; Landete-Castillejos, Tomás

    2015-01-01

    Bone ash, collagen, Ca and P composition, are considered the main factors affecting mechanical properties in bones. However, a series of studies in bone and antler have shown that some trace minerals, such as manganese, may play a role whose importance exceeds what may be expected considering their low content. A previous study showed that a reduction in manganese in antlers during a year of late winter frosts led to generalized antler breakage in Spain, which included a reduction of 30% of cortical thickness, 27% reduction in impact energy, and 10% reduction in work to peak force. Starting for this observation, we experimentally studied the effects of manganese supplementation in adults and yearling (yearlings) red deer under a balanced diet. Subjects were 29 deer of different age classes (adult n = 19, yearlings n = 10) that were divided in a manganese injected group (n = 14) and a control group (n = 15). Antler content in ashes and minerals, intrinsic mechanical properties and cross section structure were examined at 4 points along the antler beam. A one way ANOVA (mean per antler) showed that in yearlings, manganese supplementation only increased its content and that of Fe. However, in adults, Mn supplementation increased the mean content per antler of Ca, Na, P, B, Co, Cu, K, Mn, Ni, Se (while Si content was reduced), and impact work but not Young's modulus of elasticity, bending strength or work to peak force. A GLM series on characteristics in the uppermost part examined in the antler, often showing physiological exhaustion and depletion of body stores, showed also a 16% increase in work to peak force in the antlers of the treated group. Thus, manganese supplementation altered mineral composition of antler and improved structure and some mechanical properties despite animals having a balanced diet.

  8. The CO2 content of the electric kWh: compared benefits of the margin content and of the content per use on a historical basis

    International Nuclear Information System (INIS)

    2007-01-01

    Aiming at calculating the carbon content of electricity production which may vary significantly in France with respect to the season, the authors propose two methods and their principles. The first one assesses an average content per usage on a historical basis, and the second one is based on the CO 2 marginal content of electricity. A table enables a comparison of these methods in terms of their main characteristics, scope, trans-national compatibility, validity, and use. Then, they give an assessment of the impact of energy management policies in terms of CO 2 benefits. They conclude that these two methods can be considered as complementary and adapted to different purposes

  9. Energetic Issues Concerning the Content of Money

    OpenAIRE

    Negoescu Gheorghe; Radu Riana Iren

    2012-01-01

    In full times of crisis, money has become increasingly more important. We put the issue to analyze whether money can be considered a form of energy. The article is taking into consideration the conservation of energy and for money is due to kinetic energy during the boom and to potential energy during the crisis. In the article is also made an illustration of the energetic content of money at a company’s level.

  10. Skylarks trade size and energy content in weed seeds to maximize total ingested lipid biomass.

    Science.gov (United States)

    Gaba, Sabrina; Collas, Claire; Powolny, Thibaut; Bretagnolle, François; Bretagnolle, Vincent

    2014-10-01

    The trade-off between forage quality and quantity has been particularly studied in herbivore organisms, but much less for seed eating animals, in particular seed-eating birds which constitute the bulk of wintering passerines in European farmlands. The skylark is one of the commonest farmland birds in winter, mainly feeding on seeds. We focus on weed seeds for conservation and management purposes. Weed seeds form the bulk of the diet of skylarks during winter period, and although this is still a matter for discussion, weed seed predation by granivorous has been suggested as an alternative to herbicides used to regulate weed populations in arable crops. Our objectives were to identify whether weed seed traits govern foraging decisions of skylarks, and to characterize key seed traits with respect to size, which is related to searching and handling time, and lipid content, which is essential for migratory birds. We combined a single-offer experiment and a multiple-offer one to test for feeding preferences of the birds by estimating seed intake on weed seed species differing in their seed size and seed lipid content. Our results showed (1) a selective preference for smaller seeds above a threshold of seed size or seed size difference in the pair and, (2) a significant effect of seed lipid biomass suggesting a trade-off between foraging for smaller seeds and selecting seeds rich in lipids. Skylarks foraging decision thus seems to be mainly based on seed size, that is presumably a 'proxy' for weed seed energy content. However, there are clearly many possible combinations of morphological and physiological traits that must play crucial role in the plant-bird interaction such as toxic compound or seed coat. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Effects of oxygen content on the pinning energy and critical current in the granular (Hg, Re)-1223 superconductors

    International Nuclear Information System (INIS)

    Passos, C.A.C.; Orlando, M.T.D.; Fernandes, A.A.R.; Oliveira, F.D.C.; Simonetti, D.S.L.; Fardin, J.F.; Belich, H.; Ferreira, M.M.

    2005-01-01

    Hg 0.82 Re 0.18 Ba 2 Ca 2 Cu 3 O 8+d polycrystalline samples, with different oxygen content, were investigated by ac resistance measurements under different applied magnetic field (up to 3 A/m) and critical current measurements. The intergrain and intragrain regions have shown an improvement in the pinning energy and critical current density, as considering the precursor preparation with 10% of O 2 and 90% of Ar (optimal doped). In addition, the samples presented S-I-S junctions type as considering Ambegaokar-Baratoff theory

  12. Prediction of apparent metabolisable energy content of cereal grains and by-products for poultry from its chemical composition

    Energy Technology Data Exchange (ETDEWEB)

    Losada, B.; Blas, C. de; Garcia-Rebollar, P.; Cachaldora, P.; Mendez, J.; Ibañez, M.

    2015-07-01

    In order to predict the metabolisable energy content of ninety batches of cereal grains and cereal by-products for poultry, regression models derived from different sample aggregations and using chemical components as independent variables were compared. Several statistics have been calculated to estimate the error of prediction. The results indicate that the highest levels of significance and coefficients of determination were obtained for equations derived from the larger data sets. However, the lowest prediction errors were associated to equations calculated for data or groups of data closer to the ingredient studied. (Author)

  13. Differences in nutrient and energy content of commonly-consumed dishes prepared in restaurants vs. at home in Hunan province, China

    Science.gov (United States)

    Jia, Xiaofang; Liu, Jiawu; Chen, Bo; Jin, Donghui; Fu, Zhongxi; Liu, Huilin; Du, Shufa; Popkin, Barry M.; Mendez, Michelle A.

    2017-01-01

    Objective Eating away from home is associated with poor diet quality, in part due to less healthy food choices and larger portions. However, few studies take into account the potential additional contribution of differences in food composition between restaurant- and home-prepared dishes. This study aimed to investigate differences in nutrients of dishes prepared in restaurants vs. at home. Design Eight commonly consumed dishes were collected in 20 of each of the following types of locations: small and large restaurants, and urban and rural households. In addition, two fast-food items were collected from 10 KFC’s, McDonald’s, and food stalls. Five samples per dish were randomly pooled from every location. Nutrients were analyzed and energy was calculated in composite samples. Differences in nutrients of dishes by preparation location were determined. Setting Urban and rural. Subjects Sodium, potassium, protein, total fat, fatty acids, carbohydrate, and energy in dishes. Results On average, both the absolute and relative fat content, saturated fatty acid (SFA) and sodium/potassium ratio were higher in dishes prepared in restaurants than households (Prestaurants (P restaurant preparation was consistently negatively associated with protein and positively associated with the percentage energy from fat in all dishes. Moreover, restaurant preparation also positively influenced the SFA content in dishes, except at the highest quantiles. Conclusions These findings suggest that compared to home preparation, dishes prepared in restaurants in China may differ in concentrations of total fat, SFA, protein, and sodium/potassium ratio, which may further contribute, beyond food choices, to less healthy nutrient intake linked to eating away from home. PMID:29306339

  14. Serve Size and Estimated Energy and Protein Contents of Meals Prepared by ‘Meals on Wheels’ South Australia Inc.: Findings from a Meal Audit Study

    Science.gov (United States)

    Arjuna, Tony; Miller, Michelle; Soenen, Stijn; Chapman, Ian; Visvanathan, Renuka; Luscombe-Marsh, Natalie D

    2018-01-01

    An audit of ‘standard’ (STD) and ‘energy and protein fortified’ (HEHP) meals from Meals on Wheels (MOW) South Australia’s summer menu was conducted to evaluate the consistency, and serve size and nutrient contents, of their menu items. Twenty soups, 20 mains and 20 desserts from each of the STD and HEHP menus were prepared at the MOW South Australia’s kitchen and delivered to three ‘sham(dummy)-clients’ over a 5-week period. Each meal component was weighed in triplicate, to the nearest gram, the variation within the serve weight was calculated, and the overall energy and protein content of each meal was determined using FoodWorks (Xyris Software, Highgate Hill, Queensland, Australia). On average, the variability for soups and mains was ≤6% and for desserts was ≤10% and although the measured serve sizes of the MOW meals were consistently smaller than prescribed serve size, the differences were minor. As a percentage of recommended daily intakes (RDIs) for adults aged over 60 years, we calculated that the STD meals contained 21–39% for energy and 42–63% for protein while the HEHP meals contained 29–55% for energy and 46–69% for protein. These findings demonstrate that MOW meals currently meet the voluntary meal guidelines for energy and protein. PMID:29461476

  15. Serve Size and Estimated Energy and Protein Contents of Meals Prepared by ‘Meals on Wheels’ South Australia Inc.: Findings from a Meal Audit Study

    Directory of Open Access Journals (Sweden)

    Tony Arjuna

    2018-02-01

    Full Text Available An audit of ‘standard’ (STD and ‘energy and protein fortified’ (HEHP meals from Meals on Wheels (MOW South Australia’s summer menu was conducted to evaluate the consistency, and serve size and nutrient contents, of their menu items. Twenty soups, 20 mains and 20 desserts from each of the STD and HEHP menus were prepared at the MOW South Australia’s kitchen and delivered to three ‘sham(dummy-clients’ over a 5-week period. Each meal component was weighed in triplicate, to the nearest gram, the variation within the serve weight was calculated, and the overall energy and protein content of each meal was determined using FoodWorks (Xyris Software, Highgate Hill, Queensland, Australia. On average, the variability for soups and mains was ≤6% and for desserts was ≤10% and although the measured serve sizes of the MOW meals were consistently smaller than prescribed serve size, the differences were minor. As a percentage of recommended daily intakes (RDIs for adults aged over 60 years, we calculated that the STD meals contained 21–39% for energy and 42–63% for protein while the HEHP meals contained 29–55% for energy and 46–69% for protein. These findings demonstrate that MOW meals currently meet the voluntary meal guidelines for energy and protein.

  16. Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery.

    Science.gov (United States)

    Shao, Li-Ming; Ma, Zhong-He; Zhang, Hua; Zhang, Dong-Qing; He, Pin-Jing

    2010-07-01

    Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  17. Resources | Energy Plan

    Science.gov (United States)

    Skip to main content Navigate Up This page location is: Department for Energy Development and Independence Department for Energy Development and Independence Resources Pages EnergyPlan Sign In Ky.gov An Official Website of the Commonwealth of Kentucky Energy and Environment Cabinet Department for Energy

  18. Energy | Argonne National Laboratory

    Science.gov (United States)

    Skip to main content Argonne National Laboratory Toggle Navigation Toggle Search Energy Batteries and Energy Storage Energy Systems Modeling Materials for Energy Nuclear Energy Renewable Energy Smart Laboratory About Safety News Careers Education Community Diversity Directory Energy Environment National

  19. 10 CFR 455.62 - Contents of a technical assistance program.

    Science.gov (United States)

    2010-01-01

    ... 455.62 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION GRANT PROGRAMS FOR SCHOOLS AND HOSPITALS AND... Schools, Hospitals, Units of Local Government, and Public Care Institutions § 455.62 Contents of a... and installation of each energy conservation measure, discussing pertinent assumptions as necessary...

  20. Nutrient Digestibility and Metabolizable Energy Content of Whole Pods Fed to Growing Pelibuey Lambs

    Directory of Open Access Journals (Sweden)

    Enrique Loyra-Tzab

    2013-07-01

    Full Text Available The nutrient digestibility, nitrogen balance and in vivo metabolizable energy supply of Mucuna pruriens whole pods fed to growing Pelibuey lambs was investigated. Eight Pelibuey sheep housed in metabolic crates were fed increasing levels of Mucuna pruriens pods: 0 (control, 100 (Mucuna100, 200 (Mucuna200 and 300 (Mucuna300 g/kg dry matter. A quadratic (p0.05 on DM and GE apparent digestibility (p0.05. DM, N and GE apparent digestibility coefficient of M. pruriens whole pods obtained through multiple regression equations were 0.692, 0.457, 0.654 respectively. In vivo DE and ME content of mucuna whole pod were estimated in 11.0 and 9.7 MJ/kg DM. It was concluded that whole pods from M. pruriens did not affect nutrient utilization when included in an mixed diet up to 200 g/kg DM. This is the first in vivo estimation of mucuna whole pod ME value for ruminants.

  1. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

    Science.gov (United States)

    Wang, Xiao; Wang, Wei; Wang, Jingli; Wu, Hao; Liu, Chang

    2017-03-01

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgGa δ doped AlGaN SLs. Mg acceptor activation energy was significantly reduced from 0.378 to 0.331 eV by using MgGa δ doping in SLs instead of traditional doping in alloys. This new process was confirmed to be able to realize high p-type doping in high Al-content AlGaN.

  2. Energy-Atlas Bavaria. Route planner for your energy transformation; Energie-Atlas Bayern. Routenplaner fuer Ihre Energiewende

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Michael [Bayerisches Landesamt fuer Umwelt, Augsburg (Germany). Oekoenergie-Institut; Bock, Melanie; Bleckmann, Friederike [Bayerisches Landesamt fuer Umwelt, Augsburg (Germany). Ref. 12 Kommunikation, internationale Zusammenarbeit

    2012-02-15

    The energy-atlas offers among others following contents: Overview about facilities for the production of renewable energies, favorable and less favorable sites for the production of renewable energies, foundations for the planning, contact persons and examples from practice, informations on technologies, fundings, and authorizations, tips for the correct proceeding in the application of renewable energies. (HSI)

  3. List of Content

    Directory of Open Access Journals (Sweden)

    IJRED Editorial

    2013-02-01

    Full Text Available CONTENTS OF ARTICLES PAGEPassive Design of Buildings for Extreme Weather EnvironmentS.N. Al-Zubaidy, S. Tokbolat, R. Tokpatayeva 1-11 Economic Impact of CDM Implementation through Alternate Energy Resource SubstitutionK.J. Sreekanth, S. Jayaraj, N. Sudarsan 13-18 Implications of Charcoal Briquette Produced by Local Communities on Livelihoods and Environment in Nairobi KenyaMary Njenga, A Yonemitsu, N Karanjaa, M Iiyama, J Kithinji, M Dubbeling C Sundberge, R R Jamnadass 19-29 A Novel Design of Multi-Chambered Biomass BatteryK. Sudhakar, R. Ananthakrishnan, A. Goyal, H.K. Darji 31-34 Power Quality Improvement Wind Energy System Using Cascaded Multilevel InverterJ.S. Sathiyanarayanan, A. S. Kumar 35-43 Solar PV Lighting and Studying after Sunset: Analysis of Micro-benefits in Off-grid Rural GhanaGeorge Y. Obeng 45-51 Innovative Green Technology for Sustainable Industrial Estate DevelopmentR. Hadiwijoyo, P Purwanto, Sudharto P Hadi 53-58 Empowering Distributed Solar PV Energy For Malaysian Rural Housing: Towards Energy Security And Equitability Of Rural CommunitiesN.A. Ahmad, H. Byrd 59-68

  4. 10 CFR 51.91 - Final environmental impact statement-contents.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-contents. 51.91... Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.91 Final environmental impact statement—contents. (a)(1) The final environmental impact statement will include responses...

  5. To understand the new world of energy - Energy saving and energy efficiency: the world of energy 2.0

    International Nuclear Information System (INIS)

    Maestroni, Myriam; Chevalier, J.M.; Derdevet, Michel

    2013-01-01

    This bibliographical note contains the table of contents and a brief presentation of a book which proposes a general overview of the world of modern energy, focuses on the main associated political and climatic stakes and challenges. It also addresses the crucial issue of energy efficiency and energy savings which are the pillars of the current energy transition. The chapters address the world energy stakes and challenges, the emergence of a new energetic paradigm, the issues of energy efficiency and energy savings, the main sources of energy savings to be exploited and valorised, the situation in Europe and in the World regarding energy efficiency, the relationship between energy transition and local territories, the necessary continuous innovation

  6. Observations and simulations of snowpack cold content and its relationship to snowmelt timing and rate

    Science.gov (United States)

    Jennings, K. S.; Molotch, N. P.

    2017-12-01

    Mountain snowpacks serve as a vital water resource for more than 1 billion people across the globe. Two key properties of snowmelt—rate and timing—are controlled by the snowpack energy budget where incoming positive fluxes are balanced by a decrease in the energy deficit of the snowpack and a change in the phase of water from solid to liquid. In this context, the energy deficit, or cold content, regulates snowmelt as runoff does not commence until the deficit approaches zero. There is significant uncertainty surrounding cold content despite its relevance to snowmelt processes, likely due to the inherent difficulties in its observation. Our work has clarified the previously unresolved meteorological and energy balance controls on cold content development in seasonal snowpacks by leveraging two unique datasets from the Niwot Ridge LTER in the Rocky Mountains of Colorado. The first is a long-term snow pit record of snowpack properties from an alpine and subalpine site within the LTER. These data were augmented with a 23-year simulation of the snowpack at both sites using a quality controlled, serially complete, hourly forcing dataset. The observations and simulations both indicated that cold content primarily developed through new snowfall, while a negative energy budget provided a secondary pathway for cold content development, mainly through longwave emission and sublimation. Cold content gains from snowfall outnumbered energy balance gains by 438% in the alpine and 166% in the subalpine. Increased spring precipitation and later peak cold content significantly delayed snowmelt onset and daily melt rates were reduced by 32.2% in the alpine and 36.1% in the subalpine when an energy deficit needed to be satisfied. Furthermore, preliminary climate change simulations indicated warmer air temperatures reduced cold content accumulation, which increased the amount of snow lost to melt throughout the winter as incoming positive fluxes had to overcome smaller energy

  7. 10 CFR 51.71 - Draft environmental impact statement-contents.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-contents. 51.71... Implementing Section 102(2) Environmental Impact Statements § 51.71 Draft environmental impact statement—contents. (a) Scope. The draft environmental impact statement will be prepared in accordance with the scope...

  8. 48 CFR 919.7010 - Contents of Mentor-Protege Agreement.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contents of Mentor-Protege... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS The Department of Energy Mentor-Protege Program 919.7010 Contents of Mentor-Protege Agreement. The proposed Mentor-Protege Agreement must contain: (a) Names, addresses...

  9. Renewable energies: an initiation guidebook to the energies of the future; Les energies renouvelables: un guide d'initiation sur les energies du futur

    Energy Technology Data Exchange (ETDEWEB)

    Walisiewicz, M.

    2003-07-01

    This book reveals the economical, political and environmental dimensions of the present day energy situation and makes a status of the available technical solutions and of the future prospects. Content: energy addiction; reserves distribution; growth limits; technical problems; nuclear energy: a false promise?; the renewable resources; hydraulic energy; wind power; sun light for lighting; green generators; ground energy; alternative realities; glossary, index. (J.S.)

  10. Differences in nutrient and energy contents of commonly consumed dishes prepared in restaurants v. at home in Hunan Province, China.

    Science.gov (United States)

    Jia, Xiaofang; Liu, Jiawu; Chen, Bo; Jin, Donghui; Fu, Zhongxi; Liu, Huilin; Du, Shufa; Popkin, Barry M; Mendez, Michelle A

    2018-05-01

    Eating away from home is associated with poor diet quality, in part due to less healthy food choices and larger portions. However, few studies account for the potential additional contribution of differences in food composition between restaurant- and home-prepared dishes. The present study aimed to investigate differences in nutrients of dishes prepared in restaurants v. at home. Eight commonly consumed dishes were collected in twenty of each of the following types of locations: small and large restaurants, and urban and rural households. In addition, two fast-food items were collected from ten KFC, McDonald's and food stalls. Five samples per dish were randomly pooled from every location. Nutrients were analysed and energy was calculated in composite samples. Differences in nutrients of dishes by preparation location were determined. Hunan Province, China. Na, K, protein, total fat, fatty acids, carbohydrate and energy in dishes. On average, both the absolute and relative fat contents, SFA and Na:K ratio were higher in dishes prepared in restaurants than households (P < 0·05). Protein was 15 % higher in animal food-based dishes prepared in households than restaurants (P<0·05). Quantile regression models found that, at the 90th quantile, restaurant preparation was consistently negatively associated with protein and positively associated with the percentage of energy from fat in all dishes. Moreover, restaurant preparation also positively influenced the SFA content in dishes, except at the highest quantiles. These findings suggest that compared with home preparation, dishes prepared in restaurants in China may differ in concentrations of total fat, SFA, protein and Na:K ratio, which may further contribute, beyond food choices, to less healthy nutrient intakes linked to eating away from home.

  11. Nutrient Digestibility and Metabolizable Energy Content of Mucuna pruriens Whole Pods Fed to Growing Pelibuey Lambs.

    Science.gov (United States)

    Loyra-Tzab, Enrique; Sarmiento-Franco, Luis Armando; Sandoval-Castro, Carlos Alfredo; Santos-Ricalde, Ronald Herve

    2013-07-01

    The nutrient digestibility, nitrogen balance and in vivo metabolizable energy supply of Mucuna pruriens whole pods fed to growing Pelibuey lambs was investigated. Eight Pelibuey sheep housed in metabolic crates were fed increasing levels of Mucuna pruriens pods: 0 (control), 100 (Mucuna100), 200 (Mucuna200) and 300 (Mucuna300) g/kg dry matter. A quadratic (pMucuna100 and Mucuna200 treatments. Increasing M. pruriens in the diets had no effect (p>0.05) on DM and GE apparent digestibility (pmucuna pod level. This effect was accompanied by a quadratic effect (pMucuna100 and Mucuna200 treatments. Urine-N excretion, GE retention and dietary estimated nutrient supply (metabolizable protein and metabolizable energy) were not affected (p>0.05). DM, N and GE apparent digestibility coefficient of M. pruriens whole pods obtained through multiple regression equations were 0.692, 0.457, 0.654 respectively. In vivo DE and ME content of mucuna whole pod were estimated in 11.0 and 9.7 MJ/kg DM. It was concluded that whole pods from M. pruriens did not affect nutrient utilization when included in an mixed diet up to 200 g/kg DM. This is the first in vivo estimation of mucuna whole pod ME value for ruminants.

  12. Energy prospects for industry

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, P P; Roberts, G F.I.; Thomas, V E; Davies, D; Crow, L M

    1983-01-01

    Contents: Electricity today and tomorrow; Gas--supply prospects for the future; Petroleum based energy--the UK perspective; Future markets for coal; Flexibility--the key to Dunlop's energy strategy; Energy conservation in Alcan; Present and future energy patterns in Courtaulds PLC; New energy technology for the quarrying industry.

  13. Energy intensity decline implications for stabilization of atmospheric CO2 content

    International Nuclear Information System (INIS)

    Lightfoot, H.D.; Green, C.

    2002-01-01

    By calculating the amount of carbon-free energy required to stabilize the level of carbon dioxide in the atmosphere at some level, such as 550 parts per million by volume (ppmv) in 2100, the authors estimate the appropriate rate of world average annual energy intensity decline. The roles played by energy efficiency and long term sectoral changes like shifts in economic activity from high energy intensity sectors or industries to low energy intensity sectors or industries are distinguished. Advances in technology and better and improved procedures, as well as a broader adoption of more efficient technologies currently available are included in the improvements made in energy efficiency. The objective was, for the period 1990 to 2100 (110 years), to estimate the potential energy efficiency increase for world electricity generation. It is noted that electricity generation represents 38 per cent of world energy consumption in 1995, while transportation accounts for 19 per cent and residential, industrial and commercial uses account for 43 per cent. In 2100, it is expected that the overall average decline in energy intensity will be 40.1 per cent of that of 1990, according to the results obtained. Looked at from another perspective, it represents an average annual rate of energy intensity decline of 0.83 per cent for 110 years. Between 0.16 and 0.30 per cent could be added to the impact of sectoral changes on the average annual rate of decline in energy intensity, while 0.83 per cent would be attributable to improvements in energy efficiency, as shown by sensitivity analysis. 33 refs., 9 tabs., 1 fig

  14. Energy content of hybrid Rumex patienta L. x Rumex tianschanicus A. Los. (Rumex OK 2 samples from autumn months

    Directory of Open Access Journals (Sweden)

    Michal Rolinec

    2018-03-01

    Full Text Available Aim of this experiment was to determine the gross energy concentration of fresh, wilted and ensiled hybrid of Rumex patientia L. x Rumex tianschanicus A. Los. (Rumex OK 2. Samples were collected in autumn months of the year 2017. The plant of Rumex OK 2 consist during autumn months only from rosette of leaves. The height of leaves was in autumn months following, September 56.68±13.80 cm; October 59.29±11.93 cm and November 55.98±10.80 cm. Rumex OK 2 silage was made from wilted matter, with or without of addition of dried molasses. Gross energy was determined as the heat released after combustion of a sample (Leco AC 500 in MJ per kilogram of dry matter of the sample. By the autumn months the concentration of dry matter, as well as the concentration of gross energy increased, except Rumex OK 2 silage from November. The highest concentration of gross energy had wilted Rumex OK 2 from November (18.02 MJ.kg-1 of dry matter. There was no significant effect of addition of dried molasses to wilted Rumex OK 2 before ensiling on gross energy concentration in Rumex OK 2 silages (P>0.05. Gross energy concentration of all types of analysed samples had relative high value (16.98 to 18.02 MJ.kg-1 of dry matter. Fresh or ensiled Rumex OK 2 can be used as a part of feed ratio for ruminants or can be utilised in biogas station. However, due to the low content of dry mater in fresh or wilted material the production of silage can be in autumn months problematic.

  15. Carry-over effects modulated by salinity during the early ontogeny of the euryhaline crab Hemigrapsus crenulatus from the Southeastern Pacific coast: Development time and carbon and energy content of offspring.

    Science.gov (United States)

    Urzúa, Ángel; Bascur, Miguel; Guzmán, Fabián; Urbina, Mauricio

    2018-03-01

    Hemigrapsus crenulatus is a key species of coastal and estuarine ecosystems in the Southeastern Pacific and New Zealand. Since the gravid females-and their embryos-develop under conditions of variable salinity, we propose that low external salinity will be met with an increase in energy expenditures in order to maintain osmoregulation; subsequently, the use of energy reserves for reproduction will be affected. In this study, we investigate in H. crenulatus whether 1) the biomass and energy content of embryos is influenced by salinity experienced during oogenesis and embryogenesis and 2) how variation in the biomass and energy content of embryos affects larval energetic condition at hatching. Here at low salinity (5PSU), egg-bearing females experienced massive and frequent egg losses, and therefore the development of their eggs during embryogenesis was not completed. In turn, at intermediate and high salinity (15 and 30PSU) embryogenesis was completed, egg development was successful, and larvae were obtained. Consistently, larvae hatched from eggs produced and incubated at high salinity (30PSU) were larger, had higher dry weight, and had increased carbon content and energy than larvae hatched from eggs produced at intermediate salinity (15PSU). From these results, it is seen that the size and biomass of early life stages of H. crenulatus can be affected by environmental salinity experienced during oogenesis and embryogenesis, and this variation can then directly affect the energetic condition of offspring at birth. Therefore, this study reveals a "cascade effect" modulated by salinity during the early ontogeny. Copyright © 2018 Elsevier Inc. All rights reserved.

  16. Flood pulse influence and anthropic impact on the chemical composition and energy content of Oryza glumaepatula in an Amazonian lake

    Directory of Open Access Journals (Sweden)

    A. Enrich-Prast

    Full Text Available The aim of this research was to study the flood pulse influence and the anthropic impact caused by bauxite tailings on the chemical composition of O. glumaepatula in Batata lake (PA, Brazil. Sampling was carried out in stands of O. glumaepatula in the low-water, filling, high-water, and drawdown periods in impacted and natural areas of Batata lake. During the low-water and drawdown periods the stands of O. glumaepatula were exposed, and in the filling and high-water periods the water depth was respectively 1.4 and 3.8 m. The collected material was dried at 70ºC, ground, and concentrations of total phosphorus, total nitrogen, organic carbon, and energy content were determined. The results indicate that the biomass increase, caused by the rise in water level, has a dilution effect on nitrogen and phosphorus concentrations in O. glumaepatula. The energy contents did not present significant differences in any of the studied periods. The results suggest that from the low water to filling period, nitrogen becomes more limiting to O. glumaepatula in the impacted area, whereas phosphorus becomes more limiting in the natural area. The population of O. glumaepatula contributes to the recovery of the impacted area of Batata lake as the detritus from this species accumulates over the sediment. This accumulation impedes future re-suspension of the bauxite tailings and increases the organic matter and nutrient concentrations in the impacted sediment.

  17. In vivo energy dispersive X-ray fluorescence for measuring the content of essential and toxic trace elements in teeth

    International Nuclear Information System (INIS)

    Zaichick, V.; Ovchjarenko, N.; Zaichick, S.

    1999-01-01

    The calibration and application of a facility, based on energy dispersive X-ray fluorescent analysis (EDXRF) using 109 Cd as an excitation source, for in vivo and in vitro estimation of Ca, Pb, Sr and Zn in tooth enamel is described. During the in vivo measurements, the device ensures tissue protection of face and mouth cavity from radiation, and only a small part of tooth surface under study is irradiated. To calibrate the facility, the contents of Ca, Sr and Zn were analyzed simultaneously in the enamel of 50 teeth by EDXRF and instrumental neutron activation analysis (INAA). Standards prepared from powdered tooth enamel with additions of chemically pure lead compounds were used to calibrate for lead graduation. Enamel calcium is suggested as an internal standard during in vivo EDXRF of teeth. The content of enamel Sr, Zn and Pb was determined by EDXRF in 35 permanent intact teeth of teenagers and adults. It was shown that lead concentration didn't exceed 3 μg/g for all the teeth

  18. Changes in proximate composition and somatic energy content for Pacific sand lance (Ammodytes hexapterus) from Kachemak Bay, Alaska relative to maturity and season

    Science.gov (United States)

    Robards, Martin D.; Anthony, Jill A.; Rose, George A.; Piatt, John F.

    1999-01-01

    Mean dry-weight energy values of adult Pacific sand lance (Ammodytes hexapterus) peaked in spring and early summer (20.91 kJg−1 for males, 21.08 kJg−1 for females), then declined by about 25% during late summer and fall (15.91 kJg−1 for males, 15.74 kJg−1 for females). Late summer declines in energy density paralleled gonadal development. Gender differences in energy density (maleslance spawn in October, entering the winter with close to their minimum whole body energy content. Juvenile sand lance exhibited a relatively constant protein to lipid ratio until they reached 80 mm fork length. Thereafter, relative proportions of protein remained constant while lipid proportions increased significantly. Dry weight energy densities of juveniles increased from a minimum 16.67 kJg−1 to a maximum of 19.68 kJg−1, and (per g) are higher than adults in late summer. The seasonal food value of adult sand lance to predators varies markedly, but maximum energetic value coincides with important feeding periods for marine mammals, fish, and seabirds.

  19. Energy Research & Development

    Science.gov (United States)

    Skip to Main Content CA.gov California Energy Commission CA.gov | Contact | Newsroom | Quick Links convenience of our website visitors and is for informational purposes only. The California Energy Commission Google Translate™. The California Energy Commission does not endorse the use of Google TranslateÂ

  20. LSDS Development for Isotopic Fissile Content Assay

    International Nuclear Information System (INIS)

    Lee, Yong Deok; Park, Chang Je; Park, Geun Il; Lee, Jung Won; Song, Kee Chan

    2010-01-01

    Concerning the sustainable energy supply and green house effect, nuclear energy became the most feasible option to meet the energy demand in Korea. However, the production of the spent nuclear fuel is the inevitable situation. Since the first nuclear power plant started to produce the electricity in Korea, the accumulated amount of spent fuels exceeded 10k tomes recently. The accumulation of the spent fuels is the big issue in the society. Therefore, as an option which strengthens the nuclear proliferation resistance and reduces the amount of spent fuels, sodium fast reactor (SFR) program linked with pyro-processing is under development to re-use the PWR spent fuel and produce the energy. In the process, the produced metallic material involves uranium and TRU (transuranic; neptunium, plutonium, and americium). The uranium-TRU is used to fabricate SFR fuel. The burning the recycled fuel in the reactor is to solve the current spent fuel storage problem and to minimize the actinides accumulation having long half-life. Generally, the spent fuel from PWR has unburned ∼1 % U235, produced ∼0.5 % plutonium from decay chain, ∼3 % fission products, ∼ 0.1 % minor actinides (MA) and uranium remainder. About 1.5 % fissile materials still exist in the spent fuel. Therefore, spent fuel is not only waste but energy resource. The direct and isotopic fissile content assay is the crucial technology for the spent fuel reuse. Additionally, the fissile content analysis will contribute to the optimum storage design and safe spent fuel management. Several nondestructive technologies have been developed for the spent fuel assay; gamma ray measurement, passive and active neutron measurements. Spent fuel emits intense gamma rays and neutrons by (a, n) and spontaneous fission. This intense background has the limitation on the direct analysis of fissile materials. Recently, to analyze the individual fissile content, leadslowing down spectrometer (LSDS) has been being developed in Korea

  1. Chemical and nutritional content of Opuntia ficus-indica (L ...

    African Journals Online (AJOL)

    Opuntia ficus-indica (L.) fruit pulp was analyzed for its chemical and nutritional content and the results compared with those of the same species from other parts of the world. The analysis included those for: Moisture and ash contents, crude fibre, energy values, non-reducing sugars, crude protein and vitamin C. Total ...

  2. Saving energy in 1-D : tailoring energy-saving advice using a Rasch-based energy recommender system

    NARCIS (Netherlands)

    Starke, Alain; Willemsen, Martijn; Snijders, Chris; Ge, Mouhzi; Ricci, Francesco

    2015-01-01

    Although there are numerous possibilities to save energy, conservation initiatives often do not tailor their content to the consumer. By considering energy conservation as a one-dimensional construct, where different behaviors have different execution difficulties, we have set out a Rasch-based

  3. The effects of moisture content, particle size and binding agent content on oil palm shell pellet quality parameters

    Directory of Open Access Journals (Sweden)

    Nelson Arzola

    2012-01-01

    Full Text Available Waste-to-energy represents a challenge for the oil palm industry worldwide. Bio-pellet production is an alternative way of adding value to oil palm biomass. This would mean that a product having major energy density becomes more mechanically stable and achieves better performance during combustion. This paper deals with oil palm shell pelleting; using binding agents having up to 25% mass keeping average particle size less than 1mm and moisture content up to 18.7% (d.b. were evaluated. An experimental factorial design used binding agent mass percentage, milled shell particle size and moisture content as factors. Pellet density response surfaces and durability index were obtained. Pellet performance during thermal-chemical transformation was also evaluated by using thermogravimetry equipment. The results led to technical evaluation of scale-up at industrial production level.

  4. Wave propagation of spectral energy content in a granular chain

    NARCIS (Netherlands)

    Shrivastava, Rohit Kumar; Luding, Stefan

    2017-01-01

    A mechanical wave is propagation of vibration with transfer of energy and momentum. Understanding the spectral energy characteristics of a propagating wave through disordered granular media can assist in understanding the overall properties of wave propagation through inhomogeneous materials like

  5. Improved correlations of hydrogen content versus combustion performance related properties of aviation turbine fuels

    Energy Technology Data Exchange (ETDEWEB)

    Nagpal, J.M.; Sharma, R.L.; Sagu, M.L.; Tiwari, G.B. (Indian Institute of Petroleum, Dehradun (India))

    1994-01-01

    In recent years the hydrogen content of Aviation Fuels has generated considerable interest. Various investigators have suggested correlation of hydrogen content with combustion related properties of aviation turbine fuel (ATF). A suitable threshold value of hydrogen content 13.8 wt% is being considered as a waiver of specifications such as specific energy, aniline gravity product, smoke point, aromatic content, naphthalenes and luminometer number. In the present paper relationship between the hydrogen content and combustion related properties has been examined and improved correlations of hydrogen content with several combustion related properties have been developed by incorporating a characterization factor in the equations. The supporting threshold value of a hydrogen content of 13.8wt% is verified with 25 data points for waiving of combustion properties such as specific energy, aniline gravity product, smoke point and aromatic content from aviation turbine fuel. 6 refs., 12 figs., 2 tabs.

  6. Energy value of meat in selected species of feathered game

    Directory of Open Access Journals (Sweden)

    František Vitula

    2011-01-01

    Full Text Available The aim of this work was to compare gross energy (GE in breast and thigh muscles in the following six species of feathered game reared in Europe: guineafowl (Numida meleagris, common pheasant (Phasianus colchicus, Japanese quail (Coturnix coturnix japonica, chukar (Alectoris chucar, grey partridge (Perdix perdix and wild turkey (Meleagris gallopavo. Calorimetric analysis revealed significant (P ≤ 0.05 and highly significant (P ≤ 0.01 differences between individual species in the content of energy in breast and thigh muscles. The highest content of energy (recalculated to dry matter was found in breast muscles from wild turkey (24.75 MJ·kg-1 and Japanese quail (24.57 MJ·kg-1 whereas the highest content of energy (recalculated to dry matter in thigh muscles was found in Japanese quail and grey partridge. Highly significant (P ≤ 0.01 differences in the energy content were also found between breast and thigh muscles in all studied game species except for wild turkey. Differences in the content of energy in muscles between individual species occur mainly due to different contents of fat in muscles. This is also confirmed by high correlation coefficients between the content of energy and the content of fat in breast (r = 0.912 and thigh muscles (r = 0.878. Our study provides more specific data on the amount of energy in muscles of major species of feathered game reared in Europe and significantly extends current knowledge in this field.

  7. Prediction of Digestible and Metabolizable Energy Content of Rice Bran Fed to Growing Pigs

    Directory of Open Access Journals (Sweden)

    C. X. Shi

    2015-05-01

    Full Text Available Two experiments were conducted to determine the digestible energy (DE and metabolizable energy (ME content of 19 rice bran samples and to develop prediction equations for DE and ME based on their chemical composition. The 19 rice bran samples came from different rice varieties, processing methods and regions. The basal diet was formulated using corn and soybean meal (74.43% corn and 22.91% soybean meal and 2.66% vitamins and minerals. The 19 experimental diets based on a mixture of corn, soybean meal and 29.2% of each source of rice bran, respectively. In Exp. 1, 108 growing barrows (32.1±4.2 kg were allotted to 1 of 18 treatments according to a completely randomized design with 6 pigs per treatment. The treatment 1 was the control group which was fed with basal diet. The treatments 2 to 18 were fed with experimental diets. In Exp. 2, two additional rice bran samples were measured to verify the prediction equations developed in Exp. 1. A control diet and two rice bran diets were fed to 18 growing barrows (34.6±3.5 kg. The control and experimental diets formulations were the same as diets in Exp. 1. The results showed that the DE ranged from 14.48 to 16.85 (mean 15.84 MJ/kg of dry matter while the ME ranged from 12.49 to 15.84 (mean 14.31 MJ/kg of dry matter. The predicted values of DE and ME of the two additional samples in Exp. 2 were very close to the measured values.

  8. Energy modelling with SOPKA-E for the energy paths of the Commission of Inquiry on ''Future nuclear energy policy''

    International Nuclear Information System (INIS)

    Faude, D.

    1983-03-01

    The Commission of Inquiry on ''Future nuclear energy policy'' of the 8th Deutscher Bundestag has examined the question of the longterm exploitation of nuclear energy in the Federal Republic of Germany within a more general framework of energy policy and, for this purpose, created the concept of energy paths. To calculate these energy paths, the SOPKA-E simulation model has been developed and applied at the Karlsruhe Nuclear Research Center. In Chapter 2, the central part of this report, the form and contents of path modeling are described in detail. To help readers understand the energy paths concept, the general background of energy policy in the seventies, which gave rise to the contents of the energy paths, is outlined in a survey article in Chapter 1. Chapter 3 is a description of the energy projections contained in the joint expert opinion on the third updated version of the Energy Program in the light of the energy paths. In Chapter 4 some approaches - albeit fragmentary - are outlined which have been adopted by the Commission of Inquiry of the 9th Deutscher Bundestag in adapting energy paths to the present situation. The presentation in this report of the model computations with SOPKA-E is meant to be a documentation. (orig./UA) [de

  9. Monthly energy review, February 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This is an overview of the February energy statistics by the Energy Information Administration. The contents of the report include an energy overview, US energy production, energy consumption, trade stocks and prices for petroleum, natural gas, oil and gas resource development, coal, electricity, nuclear energy, energy prices, and international energy. 37 figs., 73 tabs.

  10. Monthly energy review, January 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This is an overview of the January energy statistics by the Energy Information Administration. The contents of the report include an energy overview, US energy production, energy consumption, trade stocks and prices for petroleum, natural gas, oil and gas resource development, coal, electricity, nuclear energy, energy prices, and international energy. 47 figs., 71 tabs.

  11. A systematic review and meta-analysis of the nutrient content of preterm and term breast milk.

    Science.gov (United States)

    Gidrewicz, Dominica A; Fenton, Tanis R

    2014-08-30

    Breast milk nutrient content varies with prematurity and postnatal age. Our aims were to conduct a meta-analysis of preterm and term breast milk nutrient content (energy, protein, lactose, oligosaccharides, fat, calcium, and phosphorus); and to assess the influence of gestational and postnatal age. Additionally we assessed for differences by laboratory methods for: energy (measured vs. calculated estimates) and protein (true protein measurement vs. the total nitrogen estimates). Systematic review results were summarized graphically to illustrate the changes in composition over time for term and preterm milk. Since breast milk fat content varies within feeds and diurnally, to obtain accurate estimates we limited the meta-analyses for fat and energy to 24-hour breast milk collections. Forty-one studies met the inclusion criteria: 26 (843 mothers) preterm studies and 30 (2299 mothers) term studies of breast milk composition. Preterm milk was higher in true protein than term milk, with differences up to 35% (0.7 g/dL) in colostrum, however, after postnatal day 3, most of the differences in true protein between preterm and term milk were within 0.2 g/dL, and the week 10-12 estimates suggested that term milk may be the same as preterm milk by that age. Colostrum was higher than mature milk for protein, and lower than mature milk for energy, fat and lactose for both preterm and term milk. Breast milk composition was relatively stable between 2 and 12 weeks. With milk maturation, there was a narrowing of the protein variance. Energy estimates differed whether measured or calculated, from -9 to 13%; true protein measurement vs. the total nitrogen estimates differed by 1 to 37%. Although breast milk is highly variable between individuals, postnatal age and gestational stage (preterm versus term) were found to be important predictors of breast milk content. Energy content of breast milk calculated from the macronutrients provides poor estimates of measured energy, and protein

  12. How brain response and eating habits modulate food energy estimation.

    Science.gov (United States)

    Mengotti, P; Aiello, M; Terenzi, D; Miniussi, C; Rumiati, R I

    2018-05-01

    The estimates we do of the energy content of different foods tend to be inaccurate, depending on several factors. The elements influencing such evaluation are related to the differences in the portion size of the foods shown, their energy density (kcal/g), but also to individual differences of the estimators, such as their body-mass index (BMI) or eating habits. Within this context the contribution of brain regions involved in food-related decisions to the energy estimation process is still poorly understood. Here, normal-weight and overweight/obese women with restrained or non-restrained eating habits, received anodal transcranial direct current stimulation (AtDCS) to modulate the activity of the left dorsolateral prefrontal cortex (dlPFC) while they performed a food energy estimation task. Participants were asked to judge the energy content of food images, unaware that all foods, for the quantity presented, shared the same energy content. Results showed that food energy density was a reliable predictor of their energy content estimates, suggesting that participants relied on their knowledge about the food energy density as a proxy for estimating food energy content. The neuromodulation of the dlPFC interacted with individual differences in restrained eating, increasing the precision of the energy content estimates in participants with higher scores in the restrained eating scale. Our study highlights the importance of eating habits, such as restrained eating, in modulating the activity of the left dlPFC during food appraisal. Copyright © 2018 Elsevier Inc. All rights reserved.

  13. Effects of whole grain rye crisp bread for breakfast on appetite and energy intake in a subsequent meal: two randomised controlled trails with different amounts of test foods and breakfast energy content.

    Science.gov (United States)

    Forsberg, Tina; Åman, Per; Landberg, Rikard

    2014-03-25

    Fibre-rich rye products have been shown to have superior effects on self-reported appetite compared to white wheat bread and some studies have shown lower energy intake after subsequent meal. The aim of the present study was to evaluate the effects of whole grain rye crisp bread (RB) versus refined wheat bread (WB) on appetite in two studies using different portion sizes and total energy intakes. Two randomised cross-over pre-load studies were conducted in 20 and 21 subjects, respectively. Appetite was rated by visual analogue scale (VAS) for 4 h. In both studies, participants were 39 ± 14 years old and had BMI 23 ± 3. The studies differed in terms of energy content of the breakfasts and proportion of energy from the treatment product as well as amount of test products. Differences between treatments within the two studies were evaluated using mixed models with repeated measures appropriate for cross-over designs. In Study one, hunger and desire to eat were significantly lower (P portion size was lower than in Study one and the test product constituted a larger proportion of the breakfast. Fullness was significantly higher after RB compared with WB (P portion was smaller and accounted for a larger proportion of the total energy intake of the breakfast.

  14. Determination of sulfur content in fuels

    International Nuclear Information System (INIS)

    Daucik, P.; Zidek, Z.; Kalab, P.

    1998-01-01

    The sulfur content in fuels, Diesel fuels, and in the solutions of dibutylsulfide in a white oil was determined by various methods. The results obtained by elemental analysis have shown that the method is not advisable for the determination of sulfur in fuels. A good agreement was found by comparing the results in the determination of the sulfur by Grote-Krekeler's and Hermann-Moritz's methods and by the energy-dispersive X-ray fluorescence analysis. The last method is the modern, comfortable, and timesaving method enabling the fast and precise determination of sulfur contents in the various types of samples. (authors)

  15. Factors influencing perceptions of domestic energy information: Content, source and process

    International Nuclear Information System (INIS)

    Simcock, Neil; MacGregor, Sherilyn; Catney, Philip; Dobson, Andrew; Ormerod, Mark; Robinson, Zoe; Ross, Simon; Royston, Sarah; Marie Hall, Sarah

    2014-01-01

    Reducing household energy consumption is an essential element of the UK Government's carbon reduction strategy. Whilst increased knowledge alone will not necessarily lead to tangible actions on the part of consumers, knowledge of various kinds is, we argue, still important if domestic energy usage is to be reduced. In an attempt to ‘educate’ the public, governments have typically resorted to ‘mass information’ campaigns that have been considered largely unsuccessful. Yet understanding what alternative forms of learning could be cultivated has been limited by the dearth of research that explores whether and why people consider information about energy and energy saving to be useful. By exploring this, we can move towards an understanding of how knowledge about energy saving can be better shared and communicated, enabling more meaningful learning to take place. Drawing on in-depth qualitative data with fifty-five participants, this paper highlights a range of factors that affect perceptions of energy information. It argues that these factors are not discrete, but are interlinked. A fundamentally different model of knowledge exchange is needed for more effective learning about energy saving to occur. A number of implications for policy are proposed in our conclusions. - Highlights: • A range of factors influence perceptions of energy information. These factors are interlinked. • Energy information perceived as more relevant when it could be ‘anchored’ to everyday frames of understanding. • Both qualified ‘experts’ and peers with personal experience valued as potential information sources. • ‘One-way’ information communication perceived negatively. Two-way information exchange built trust and a sense of control. • Participants’ active information assessment very different to the passive consumer assumed by knowledge-deficit model

  16. The influence of different dietary energy content and feeding regimes on growth and feed utilization of European sea bass (Dicentrarchus labrax, L.

    Directory of Open Access Journals (Sweden)

    Pier Paolo Gatta

    2010-01-01

    Full Text Available The growing importance of European sea bass (Dicentrarchus labrax in aquaculture underlines the need to optimize the feeding strategy for this fish species. The aim of the present study was to assess the effect of dietary energy content and feeding regime on growth performance, feed uti- lization and feeding costs for European sea bass. Seven hundreds and forthyfourfish(averageinitial forthyfourfish(averageinitial four fish ( average initial body weight 68g were randomly allocated into twelve tanks 800 l in a closed recirculation system (water temperature: 22°C; dissolved oxygen ≥90% of saturation. Three isoproteic (47% crude protein extruded diets were formulated with different lipid levels i.e. 16% (diet D16, 24% (diet D24 and 32% (diet D32 and each diet was fed at two different feeding regimes (satiation and 80% satiation accord- ing to a bifactorial experimental design. Feed intake (FI was recorded daily. After 77 days, fish were bulk weighed and growth, SGR and FCR were calculated. Feedingregimesaffectedall theanalysed Feeding regimes affected all the analysed parameters (P<0.05, whereas diet influenced only FCR, FI, protein and lipid intake and the economic efficiency ratio (EER. Fish fed the lowest energy content diet (D16 to satiation resulted in the highest feed intake, a FCR similar to that of fish fed diets D24 and D32 and in the lowest EER.

  17. Effects of particle size and adaptation duration on the digestible and metabolizable energy contents and digestibility of various chemical constituents in wheat for finishing pigs determined by the direct or indirect method.

    Science.gov (United States)

    Fan, Yuanfang; Guo, Panpan; Yang, Yuyuan; Xia, Tian; Liu, Ling; Ma, Yongxi

    2017-04-01

    This experiment was conducted as a 3×2×2 factorial design to examine the effects of particle size (mean particle size of 331, 640, or 862 μm), evaluation method (direct vs indirect method) and adaptation duration (7 or 26 days) on the energy content and the apparent total tract digestibility (ATTD) of various chemical components in wheat when fed to finishing pigs. Forty-two barrows (Duroc×Landrace×Yorkshire) with an initial body weight of 63.0±0.8 kg were individually placed in metabolic cages and randomly allotted to 1 of 7 diets with 6 pigs fed each diet. For the indirect method, the pigs were fed either a corn-soybean meal based basal diet or diets in which 38.94% of the basal diet was substituted by wheat of the different particle sizes. In the direct method, the diets contained 97.34% wheat with the different particle sizes. For both the direct and indirect methods, the pigs were adapted to their diets for either 7 or 26 days. A reduction in particle size linearly increased the digestible energy (DE) and metabolizable energy (ME) contents as well as the ATTD of gross energy, crude protein, organic matter, ether extract (EE) and acid detergent fiber (ADF) (penergy, crude protein, dry matter and organic matter were higher (pdirect method, but the ATTD of ADF, EE, and neutral detergent fiber were higher when determined by the indirect method (pdirect method but quadratic equations (p = 0.073 and p = 0.088, respectively) about ATTD of ADF and EE when determined by the indirect method. Decreasing particle size can improve the DE and ME contents of wheat; both of the direct and indirect methods of evaluation are suitable for evaluating the DE and ME contents of wheat with different particle sizes; and an adaptation duration of 7 d is sufficient to evaluate DE and ME contents of wheat in finishing pigs.

  18. 10 CFR 436.102 - General operations plan format and content.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false General operations plan format and content. 436.102... PROGRAMS Guidelines for General Operations Plans § 436.102 General operations plan format and content. (a... effective date of these guidelines, a general operations 10-year plan which shall consist of two parts, an...

  19. Waste to energy

    CERN Document Server

    Syngellakis, S

    2014-01-01

    Waste to Energy deals with the very topical subject of converting the calorific content of waste material into useful forms of energy. Topics included cover: Biochemical Processes; Conversions by Thermochemical Processes; Computational Fluid Dynamics Modelling; Combustion; Pyrolysis; Gasification; Biofuels; Management and Policies.

  20. Monthly energy review: March 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This is the March report by the Energy Information Administration. The contents of the report include an article on current and potential markets for alternative-fuel vehicles, an energy overview, and data on energy consumption, petroleum, natural gas, oil and gas resource development, coal, electricity, nuclear energy, energy prices, and international energy. 32 figs., 88 tabs.

  1. A policy of nuclear energy or energy conservation - on the construction of a wrong alternative

    International Nuclear Information System (INIS)

    Traube, K.

    1981-01-01

    From the content: a secret good-bye - wrong information from the energy experts - is there any priority for the efficient utilization of energie - do nuclear energy and energy conservation measures complement each other - the hidden socio-political dimensions - counter-information is necessary. (HP) [de

  2. Multimaterial Decomposition Algorithm for the Quantification of Liver Fat Content by Using Fast-Kilovolt-Peak Switching Dual-Energy CT: Clinical Evaluation.

    Science.gov (United States)

    Hyodo, Tomoko; Yada, Norihisa; Hori, Masatoshi; Maenishi, Osamu; Lamb, Peter; Sasaki, Kosuke; Onoda, Minori; Kudo, Masatoshi; Mochizuki, Teruhito; Murakami, Takamichi

    2017-04-01

    Purpose To assess the clinical accuracy and reproducibility of liver fat quantification with the multimaterial decomposition (MMD) algorithm, comparing the performance of MMD with that of magnetic resonance (MR) spectroscopy by using liver biopsy as the reference standard. Materials and Methods This prospective study was approved by the institutional ethics committee, and patients provided written informed consent. Thirty-three patients suspected of having hepatic steatosis underwent non-contrast material-enhanced and triple-phase dynamic contrast-enhanced dual-energy computed tomography (CT) (80 and 140 kVp) and single-voxel proton MR spectroscopy within 30 days before liver biopsy. Percentage fat volume fraction (FVF) images were generated by using the MMD algorithm on dual-energy CT data to measure hepatic fat content. FVFs determined by using dual-energy CT and percentage fat fractions (FFs) determined by using MR spectroscopy were compared with histologic steatosis grade (0-3, as defined by the nonalcoholic fatty liver disease activity score system) by using Jonckheere-Terpstra trend tests and were compared with each other by using Bland-Altman analysis. Real non-contrast-enhanced FVFs were compared with triple-phase contrast-enhanced FVFs to determine the reproducibility of MMD by using Bland-Altman analyses. Results Both dual-energy CT FVF and MR spectroscopy FF increased with increasing histologic steatosis grade (trend test, P algorithm quantifying hepatic fat in dual-energy CT images is accurate and reproducible across imaging phases. © RSNA, 2017 Online supplemental material is available for this article.

  3. In vivo measurements background estimation of low energy trough the anthropometric parameters correlation and with the potassium body content

    International Nuclear Information System (INIS)

    Sousa, Wanderson O.; Dantas, Ana Leticia A.; Dantas, Bernardo M.

    2002-01-01

    The occupational monitoring of individuals with potential risk of incorporation of radionuclides such as Am-241, U-238, U-235 and Ra-226 by inhalation in workplaces where particulates in suspension can be present, is frequently performed by in vivo measurements of the lungs. The activity calculation involves a comparison of the acquired spectrum with a reference spectrum. The accuracy of the background prediction is critical when the expected activities are close to the minimum detection limit. This is the case of occupational monitoring where most of the activities observed are bellow or very close the detection limit. The use of a inappropriate reference spectrum can lead to false-positive or false-negative results. The variability of potassium content among individuals in one of the major factors in the fluctuation of the count rate in the low energy region of the spectrum. This contribution is associated with the Compton effect due to the interaction of 1461 keV photons emitted by K-40. In order to verify the correlation between the background count rate in the various regions of interest of the low energy spectra with the potassium mass in the body it was designed an experimental procedure consisting of measuring a thoracic phantom containing known amounts of potassium. The strong correlation observed motivated the continuity of this work which consisted in the analysis of real low energy in vivo spectra with the aim of verifying the correlation between anthropometric parameters (sex, age, weight and height) and the count rates in the region of K-40 with the count rates in the low energy regions of interest. The results obtained show a significant correlation between the selected parameters with the count rate of the background. This allows a more reliable estimation of activity of low energy radionuclides in individuals monitored through in vivo measurements. The occupational monitoring. (author)

  4. Monthly energy review: February 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-23

    This is the February report by the Energy Information Administration. The contents of the report include an article on the effect of the proximity of wind resources to transmission lines, an energy overview, energy consumption, petroleum, natural gas, oil and gas resource development, coal, electricity, nuclear energy, and international energy. 57 tabs.

  5. Proximate Composition and Mineral Content in Different ,Types of

    African Journals Online (AJOL)

    The: concentration of protein in traditional and ... resuiis:in d;je~t types o[togwa wjth yariatiOl? in proximate comfX?sition, energy density and~mirieral content. " . ..... hi the preparation of simulated togwa l .,. "'.' .. IngredientS ,Dtj<: "\\C!~de P~o-.' Ct;ude fi-. Fat: --Ash. Caroo-. Energy matte; r tein (0/0) . ,; bee hydrate value .: (%).

  6. Standards-based Content Resources: A Prerequisite for Content Integration and Content Interoperability

    Directory of Open Access Journals (Sweden)

    Christian Galinski

    2010-05-01

    Full Text Available Objective: to show how standards-based approaches for content standardization, content management, content related services and tools as well as the respective certification systems not only guarantee reliable content integration and content interoperability, but also are of particular benefit to people with special needs in eAccessibility/eInclusion. Method: document MoU/MG/05 N0221 ''Semantic Interoperability and the need for a coherent policy for a framework of distributed, possibly federated repositories for all kinds of content items on a world-wide scale''2, which was adopted in 2005, was a first step towards the formulation of global interoperability requirements for structured content. These requirements -based on advanced terminological principles- were taken up in EU-projects such as IN-SAFETY (INfrastructure and SAFETY and OASIS (Open architecture for Accessible Services Integration and Standardization. Results: Content integration and content interoperability are key concepts in connection with the emergence of state-of-the-art distributed and federated databases/repositories of structured content. Given the fact that linguistic content items are increasingly combined with or embedded in non-linguistic content items (and vice versa, a systemic and generic approach to data modelling and content management has become the order of the day. Fulfilling the requirements of capability for multilinguality and multimodality, based on open standards makes software and database design fit for eAccessibility/eInclusion from the outset. It also makes structured content capable for global content integration and content interoperability, because it enhances its potential for being re-used and re-purposed in totally different eApplications. Such content as well as the methods, tools and services applied can be subject to new kinds of certification schemes which also should be based on standards. Conclusions: Content must be totally reliable in some

  7. Male mice that lack the G-protein-coupled receptor GPR41 have low energy expenditure and increased body fat content.

    Science.gov (United States)

    Bellahcene, Mohamed; O'Dowd, Jacqueline F; Wargent, Ed T; Zaibi, Mohamed S; Hislop, David C; Ngala, Robert A; Smith, David M; Cawthorne, Michael A; Stocker, Claire J; Arch, Jonathan R S

    2013-05-28

    SCFA are produced in the gut by bacterial fermentation of undigested carbohydrates. Activation of the Gαi-protein-coupled receptor GPR41 by SCFA in β-cells and sympathetic ganglia inhibits insulin secretion and increases sympathetic outflow, respectively. A possible role in stimulating leptin secretion by adipocytes is disputed. In the present study, we investigated energy balance and glucose homoeostasis in GPR41 knockout mice fed on a standard low-fat or a high-fat diet. When fed on the low-fat diet, body fat mass was raised and glucose tolerance was impaired in male but not female knockout mice compared to wild-type mice. Soleus muscle and heart weights were reduced in the male mice, but total body lean mass was unchanged. When fed on the high-fat diet, body fat mass was raised in male but not female GPR41 knockout mice, but by no more in the males than when they were fed on the low-fat diet. Body lean mass and energy expenditure were reduced in male mice but not in female knockout mice. These results suggest that the absence of GPR41 increases body fat content in male mice. Gut-derived SCFA may raise energy expenditure and help to protect against obesity by activating GPR41.

  8. Energy options?; Energie opties?

    Energy Technology Data Exchange (ETDEWEB)

    Van Sark, W. (ed.)

    2006-05-15

    March 2006 the so-called Options Document was published by the Energy research Centre of the Netherlands (ECN) and the Netherlands Environmental Assessment Agency (MNP). The document is an overview of technical options to reduce energy consumption and emission of greenhouse gases up to 2020. Next to a brief summary of the document a few reactions and comments on the contents of the document are given. [Dutch] Maart 2006 publiceerde het Energieonderzoek Centrum Nederland (ECN) en het Milieu- en Natuurplanbureau (MNP) het zogenaamde Optiedocument energie en emissies 2010-2020. Daarin wordt een overzicht gegeven van de technische mogelijkheden voor vermindering van het energieverbruik en de uitstoot van broeikasgassen en luchtverontreinigende stoffen tot 2020. Naast een korte samenvatting van het document worden enkele reacties gegeven op de inhoud.

  9. Comparison of different methods of determining plutonium content and isotopic composition

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    At Rockwell Hanford Operations, several different methods are used to determine plutonium content and isotopic composition. These include alpha particle energy analysis, calorimetry/gamma-ray analysis, mass spectrometry, and low energy gamma-ray assay. Each is used in a process control environment and has its advantages and disadvantages in terms of sample matrix, sample preparation, concentration, error ranges, detection limits, and turn around time. Of the methods discussed, special attention is paid to the Plutonium Isotopics Solution Counter, a low energy gamma-ray assay system designed to provide plutonium and americium content and isotopic composition of Pu-238 through Pu-241 and Am-241. It is qualitatively and quantitatively compared to the other methods. A brief description of sample types which the Solution Counter analyzes is presented

  10. Studies on the reference values of bone mineral content in Bulgarian women using single energy quantitative computed tomography

    International Nuclear Information System (INIS)

    Tsvetkova, S.; Semova, R.; Lichev, A.; Delov, I.

    1995-01-01

    Quantitative CT assessment of bone mineral content (BMC) is widely used in clinical practice. The results obtained from the examination of every single patient are compared with the reference values for the corresponding age and sex. It is known that BMC shows well recognized genetic, racial, ethnic and other differences. On the other hand, the introduction of different techniques, calibration phantoms, algorithms for choosing the region of interest, statistical models etc. leads to some differences in reference values. The authors present their own studies on the reference values of BMC in Bulgarian women using single energy quantitative computed tomography and a liquid K 2 HPO 4 calibration phantom. Different statistical models for data processing are proposed. The results are compared to the studies of recognized foreign authors. 17 refs., 3 tabs., 5 figs. (author)

  11. Department of Defense Operational Energy Strategy: A Content Analysis of Energy Literature from 1973-2014

    Science.gov (United States)

    2014-03-27

    energy labels among others. These Corporate Average Fuel Economy ( CAFE ) standards were an initial means in improving the fuel efficiency of vehicles...Independence and Security Act of 2007 as a way to address the country’s energy security concerns (Scofield, 2009). Two key provisions enacted are the CAFE ...truth is that, according to a 2006 JASON report, “DoD is not a sufficiently large customer to drive the domestic market for demand and consumption of

  12. Effect of Moisture Content on Lignocellulosic Power Generation: Energy, Economic and Environmental Impacts

    Directory of Open Access Journals (Sweden)

    Karthik Rajendran

    2017-12-01

    Full Text Available The moisture content of biomass affects its processing for applications such as electricity or steam. In this study, the effects of variation in moisture content of banagrass and energycane was evaluated using techno-economic analysis and life-cycle assessments. A 25% loss of moisture was assumed as a variation that was achieved by field drying the biomass. Techno-economic analysis revealed that high moisture in the biomass was not economically feasible. Comparing banagrass with energycane, the latter was more economically feasible; thanks to the low moisture and ash content in energycane. About 32 GWh/year of electricity was produced by field drying 60,000 dry MT/year energycane. The investment for different scenarios ranged between $17 million and $22 million. Field-dried energycane was the only economically viable option that recovered the investment after 11 years of operation. This scenario was also more environmentally friendly, releasing 16-gCO2 equivalent/MJ of electricity produced.

  13. Remote-Handled Transuranic Content Codes

    International Nuclear Information System (INIS)

    2001-01-01

    The Remote-Handled Transuranic (RH-TRU) Content Codes (RH-TRUCON) document represents the development of a uniform content code system for RH-TRU waste to be transported in the 72-Bcask. It will be used to convert existing waste form numbers, content codes, and site-specific identification codes into a system that is uniform across the U.S. Department of Energy (DOE) sites.The existing waste codes at the sites can be grouped under uniform content codes without any lossof waste characterization information. The RH-TRUCON document provides an all-encompassing description for each content code and compiles this information for all DOE sites. Compliance with waste generation, processing, and certification procedures at the sites (outlined in this document foreach content code) ensures that prohibited waste forms are not present in the waste. The content code gives an overall description of the RH-TRU waste material in terms of processes and packaging, as well as the generation location. This helps to provide cradle-to-grave traceability of the waste material so that the various actions required to assess its qualification as payload for the 72-B cask can be performed. The content codes also impose restrictions and requirements on the manner in which a payload can be assembled. The RH-TRU Waste Authorized Methods for Payload Control (RH-TRAMPAC), Appendix 1.3.7 of the 72-B Cask Safety Analysis Report (SAR), describes the current governing procedures applicable for the qualification of waste as payload for the 72-B cask. The logic for this classification is presented in the 72-B Cask SAR. Together, these documents (RH-TRUCON, RH-TRAMPAC, and relevant sections of the 72-B Cask SAR) present the foundation and justification for classifying RH-TRU waste into content codes. Only content codes described in thisdocument can be considered for transport in the 72-B cask. Revisions to this document will be madeas additional waste qualifies for transport. Each content code uniquely

  14. EURATOM, origin and contents of Community European of the energy atomic; EURATOM, origen y contenidos de Comunidad Europea de la energia atomica

    Energy Technology Data Exchange (ETDEWEB)

    Prieto Serrano, N.

    2015-07-01

    After the creation, in 1951, of the European Community of the Coal and steel (ECSC), the first step in a Europe together, Federal, Belgium Germany, France, Italy, Luxembourg, and the Netherlands signed in March 1957, the treaties of Rome that established the foundations for the creation of the European Economic Community (EEC) and the European Community Atomic Energy (CEEa or Euratom). We started with this a series of articles dedicated to pregnancy, the content and issued legislation of the Euratom Treaty, particularly in the areas that most affect the management of radioactive waste. (Author)

  15. Monthly energy review, March 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This is an overview of the March 1997 energy statistics by the Energy Information Administration. The Contents of the report include an update on the effects of Title IV of the Clean Air Act Amendments of 1990 on electric utilities, an energy overview, US energy production, energy consumption, trade stocks and prices for petroleum, natural gas, oil and gas resource development, coal, electricity, nuclear energy, energy prices, and international energy. 37 figs., 60 tabs.

  16. Energy implications of future stabilization of atmospheric CO2 content

    International Nuclear Information System (INIS)

    Hoffert, M.I.; Jain, A.K.

    1998-01-01

    The United Nations Framework Convention on Climate Change calls for ''stabilization of greenhouse-gas concentrations in the atmosphere at a level that would prevent dangerous anthropogenic interference with the climate system...''. A standard baseline scenario that assumes no policy intervention to limit greenhouse-gas emissions has 10 TW (10 x 10 12 watts) of carbon-emission-free power being produced by the year 2050, equivalent to the power provided by all today's energy sources combined. Here we employ a carbon-cycle/energy model to estimate the carbon-emission-free power needed for various atmospheric CO 2 stabilization scenarios. We find that CO 2 stabilization with continued economic growth will require innovative, cost-effective and carbon-emission-free technologies that can provide additional tens of terawatts of primary power in the coming decades, and certainly by the middle of the twenty-first century, even with sustained improvement in the economic productivity of primary energy. (author)

  17. Proximate content of wild and cultured eel (Anguilla bicolor) in different part of body

    Science.gov (United States)

    Wijayanti, I.; Susilo, E. S.

    2018-02-01

    Proximate content in fish varies depends on intrinsic and extrinsic factors. Intrinsic factors include species, sexual maturity, size and body parts. Extrinsic factors include habitat, season and type of food (diet). This study aimed to know the effect of fish body parts (intrinsic factor) on proximate levels in wild and cultured eel (extrinsic). The experimental design used factorial completely randomized design with two factors 2x3. The first factor is the habitat of eel (wild and cultured) and the second factor is the part of the body (head, body and tail) with five replications. The result of statistical analysis showed that there was interaction between fish habitat and body part on moisture, protein, ash and carbohydrate content (P interaction on fat content and energy (P> 0.05). The highest water content (67.02%) was found in head of wild and the lowest one (59.44%) in the tail of wild eel; The highest protein content (18.09%) was found in the body of cultured eel and the lowest one (15.72%) was in the body of wild eel; The highest ash content (3.73%) was the head of wild eel and the lowest (1.32%) was in the body of cultured eel; The highest carbohydrate (3.73%) was found in the head of cultured eel and the lowest one (0.16%) was in the body of cultured. The wild eel had higher fat content and energy than cultured one, while the fat content and energy in body and tail were higher than in head.

  18. Experimental evidences for reducing Mg activation energy in high Al-content AlGaN alloy by MgGa δ doping in (AlN)m/(GaN)n superlattice

    OpenAIRE

    Xiao Wang; Wei Wang; Jingli Wang; Hao Wu; Chang Liu

    2017-01-01

    P-type doping in high Al-content AlGaN alloys is a main challenge for realizing AlGaN-based deep ultraviolet optoelectronics devices. According to the first-principles calculations, Mg activation energy may be reduced so that a high hole concentration can be obtained by introducing nanoscale (AlN)5/(GaN)1 superlattice (SL) in Al0.83Ga0.17N disorder alloy. In this work, experimental evidences were achieved by analyzing Mg doped high Al-content AlGaN alloys and Mg doped AlGaN SLs as well as MgG...

  19. Density content of nuclear symmetry energy from nuclear observables

    Indian Academy of Sciences (India)

    mail: ... The asymmetry arises due to the requirements that ... nuclear binding energies and the nuclear drip lines and has a crucial role in determining ... neutron-skin thickness based on covariance analysis [6] once again yields a strong cor-.

  20. Caloric content of leaves of five tree species from the riparian vegetation in a forest fragment from South Brazil

    Directory of Open Access Journals (Sweden)

    Leandro Fabrício Fiori

    2015-09-01

    Full Text Available Abstract Aim: The measurement of the caloric content evidences the amount of energy that remains in the leaf and that can be released to the aquatic trophic chain. We assessed the energy content of leaves from five riparian tree species of a forest fragment in south Brazil and analyzed whether leaf caloric content varied between leaf species and between seasons (dry and wet. The studied sites are located in Northwest of Paraná State, inside a Semi-Deciduous Forest fragment beside two headwater streams. Methods Sampling sites were located along the riparian vegetation of these two water bodies, and due to its proximity and absence of statistical differences of caloric values, analyzed as one compartment. Results Caloric content varied significantly among species and among all pairs of species, with exception of Nectandra cuspidata Ness and Calophyllum brasiliensis Cambess. Two species presented significant differences between seasons, Sloanea guianensis (Aubl. Ben and Calophyllum brasiliensis Cambess. Conclusions The absence of significant seasonal differences of energy content for some species may be due to the characteristics of the tropical forest, in which temperature did not varied dramatically between seasons. However, the energy differed between species and seasons for some species, emphasizing the necessity of a preliminary inspection of energy content, before tracing energy fluxes instead of using a single value to all species from riparian vegetation.

  1. CH-TRU Waste Content Codes

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2008-01-16

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  2. Comparison of different methods of determining plutonium content and isotopic composition

    International Nuclear Information System (INIS)

    Dowell, M.R.W.

    1985-05-01

    At Rockwell Hanford Operations, several different methods are used to determine plutonium content and isotopic composition. These include alpha particle energy analysis, calorimetry/gamma-ray analysis, mass spectrometry, and low energy ray assay. Each is used in a process control environment and has its advantages and disadvantages in terms of sample matrix, sample preparation, concentration, error ranges, detection limits, and turn around time. Of the methods discussed, special attention is paid to the Plutonium Isotopics Solution Counter, a low energy gamma ray assay system designed to provide plutonium and americium content and isotopic composition of Pu-238 through Pu-241 and Am-241. It is qualitatively and quantitatively compared to the other methods. A brief description of sample types which the Solution Counter analyzes is presented. 4 refs., 4 tabs

  3. Effects of magnesium contents in ZnMgO ternary alloys grown by molecular beam epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Sheng-Yao, E-mail: shenghu2729@yahoo.com [Department of Digital Technology Design, Tungfang Design Institute, Hunei, Kaohsiung 82941, Taiwan (China); Chou, Wu-Ching [Department of Electrophysics, National Chiao Tung University, Hsinchu 30010, Taiwan (China); Weng, Yu-Hsiang [Department of Electrical Engineering, National Taiwan Ocean University, Keelung 20224, Taiwan (China)

    2015-07-05

    Highlights: • ZnMgO alloys with different Mg contents have been produced by MBE. • Optical and structural properties have been measured and investigated. • Stress is tensile and is increased as the increasing of Mg contents. • The asymmetric behavior of the Raman mode was influenced due to the Mg contents. - Abstract: Ternary alloys of ZnMgO samples with different magnesium contents have been grown by molecular beam epitaxy on the sapphire substrates. Room temperature photoluminescence energy of ZnMgO shifted as high as 3.677 eV by increasing Mg contents corresponding to the higher Urbach average localization energy which indicates more randomness in the alloys with higher Mg contents. XRD results are also verified that the c-axis length decreases as the increasing Mg contents linking to the increased tensile stress produced by the Mg atoms. Raman spectra analyzed by the spatial correlation model to describe that the linewidth Γ is decreased but the correlation length L is increased as the increasing of Mg contents.

  4. Effects of magnesium contents in ZnMgO ternary alloys grown by molecular beam epitaxy

    International Nuclear Information System (INIS)

    Hu, Sheng-Yao; Chou, Wu-Ching; Weng, Yu-Hsiang

    2015-01-01

    Highlights: • ZnMgO alloys with different Mg contents have been produced by MBE. • Optical and structural properties have been measured and investigated. • Stress is tensile and is increased as the increasing of Mg contents. • The asymmetric behavior of the Raman mode was influenced due to the Mg contents. - Abstract: Ternary alloys of ZnMgO samples with different magnesium contents have been grown by molecular beam epitaxy on the sapphire substrates. Room temperature photoluminescence energy of ZnMgO shifted as high as 3.677 eV by increasing Mg contents corresponding to the higher Urbach average localization energy which indicates more randomness in the alloys with higher Mg contents. XRD results are also verified that the c-axis length decreases as the increasing Mg contents linking to the increased tensile stress produced by the Mg atoms. Raman spectra analyzed by the spatial correlation model to describe that the linewidth Γ is decreased but the correlation length L is increased as the increasing of Mg contents

  5. Batteries and Energy Storage | Argonne National Laboratory

    Science.gov (United States)

    Skip to main content Argonne National Laboratory Toggle Navigation Toggle Search Energy Batteries Security User Facilities Science Work with Us Energy Batteries and Energy Storage Energy Systems Modeling Transportation SPOTLIGHT Batteries and Energy Storage Argonne's all- encompassing battery research program spans

  6. Study of developing a database of energy statistics

    Energy Technology Data Exchange (ETDEWEB)

    Park, T.S. [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

    1997-08-01

    An integrated energy database should be prepared in advance for managing energy statistics comprehensively. However, since much manpower and budget is required for developing an integrated energy database, it is difficult to establish a database within a short period of time. Therefore, this study sets the purpose in drawing methods to analyze existing statistical data lists and to consolidate insufficient data as first stage work for the energy database, and at the same time, in analyzing general concepts and the data structure of the database. I also studied the data content and items of energy databases in operation in international energy-related organizations such as IEA, APEC, Japan, and the USA as overseas cases as well as domestic conditions in energy databases, and the hardware operating systems of Japanese databases. I analyzed the making-out system of Korean energy databases, discussed the KEDB system which is representative of total energy databases, and present design concepts for new energy databases. In addition, I present the establishment directions and their contents of future Korean energy databases, data contents that should be collected by supply and demand statistics, and the establishment of data collection organization, etc. by analyzing the Korean energy statistical data and comparing them with the system of OECD/IEA. 26 refs., 15 figs., 11 tabs.

  7. Environmental effects of energy forest (short rotation willow)

    International Nuclear Information System (INIS)

    Frank, K.

    1994-01-01

    This paper deals with environmental effects of producing and combusting energy forest fuel. Energy forest means short rotation willow (Salix). Supposed effects of sewage sludge application are discussed as well. Energy forestry on agricultural land implies both advantages and disadvantages for the environment. Leaf litter (humified leaves) increases the humus content in the top soil. The soil fauna is also positively affected. Until now performed studies about nitrogen leakage from fields cultivated with energy forest (Salix), have not given any distinct results. A retarded drainage within energy forest fields is on the other hand noticed. While the root system of Salix is active during a long period of the year, the nitrogen leakage become less compared to traditional cultivation. The content of plant nutrients and organic matter in sewage sludge make a resource that can be useful for agricultural purposes, especially for energy forest cultivation. The content of heavy metals and organic emissions contradicts sludge application to agricultural land. Sewage sludge with todays quality increases somewhat the content of heavy metals in the soil. This condition can be counteracted to a certain extent by growing energy forest. It has been established that Salix has high ability to heavy metal uptake, especially cadmium. Growing energy forest on drained farm land is connected with a risk for root penetration into the drainage system. With enough water and plant nutrients in the top soil the risk is reduced. Shallow depth of the pipes increases the risk. Combustion of wood chip from energy forests (and other types of biomass) gives especially two advantages. It does not give any net contribution of carbon dioxide to the atmosphere. The sulphur discharge will be minimal since the sulphur content in wood fuels is low. Discharge of nitrogen oxide and hydrocarbons may give some problems. These can be reduced by technological measures when combusting. 27 refs, 4 tabs

  8. Energy at what price? Energy markets

    International Nuclear Information System (INIS)

    Favennec, J.P.; Amic, E.; Darmois, G.

    2006-01-01

    In 2005, the whole world had to stand a real energy shock due to the rise of oil, gas and electricity prices. The perspective of a possible shortage, even at the prospect of several decades, has led to a deep change of the world energy market. In this context, this book supplies a clear and didactical presentation of the mechanisms of petroleum, gas and electricity markets, with their advantages and limitations. At the time of a globalization of economy, the book analyzes the consequences of markets deregulation on the energy prices and tries to answer several main questions: why such a price volatility? Who will take the risk of investing now? Will the energy actors of the present day concentration be in a dominating position? Content: 1 - energy, markets and energy markets; 2 - crude oil and petroleum product markets; 3 - gas markets; 4 - electric power markets; 5 - perspectives. Glossary. Index. (J.S.)

  9. Long term analysis of the biomass content in the feed of a waste-to-energy plant with oxygen-enriched combustion air.

    Science.gov (United States)

    Fellner, Johann; Cencic, Oliver; Zellinger, Günter; Rechberger, Helmut

    2011-10-01

    Thermal utilization of municipal solid waste and commercial wastes has become of increasing importance in European waste management. As waste materials are generally composed of fossil and biogenic materials, a part of the energy generated can be considered as renewable and is thus subsidized in some European countries. Analogously, CO(2) emissions of waste incinerators are only partly accounted for in greenhouse gas inventories. A novel approach for determining these fractions is the so-called balance method. In the present study, the implementation of the balance method on a waste-to-energy plant using oxygen-enriched combustion air was investigated. The findings of the 4-year application indicate on the one hand the general applicability and robustness of the method, and on the other hand the importance of reliable monitoring data. In particular, measured volume flows of the flue gas and the oxygen-enriched combustion air as well as corresponding O(2) and CO(2) contents should regularly be validated. The fraction of renewable (biogenic) energy generated throughout the investigated period amounted to between 27 and 66% for weekly averages, thereby denoting the variation in waste composition over time. The average emission factor of the plant was approximately 45 g CO(2) MJ(-1) energy input or 450 g CO(2) kg(-1) waste incinerated. The maximum error of the final result was about 16% (relative error), which was well above the error (<8%) of the balance method for plants with conventional oxygen supply.

  10. Statistical and physical content of low-energy photons in nuclear medicine imaging

    International Nuclear Information System (INIS)

    Gagnon, D.; Pouliot, N.; Laperriere, L.; Harel, F.; Gregoire, J.; Arsenault, A.

    1990-01-01

    Limit in the energy resolution of present gamma camera technology prevents a total rejection of Compton events: inclusion of bad photons in the image is inescapable. Various methods acquiring data over a large portion of the spectrum have already been described. This paper investigates the usefulness of low energy photons using statistical and physical models. Holospectral Imaging, for instance, exploits correlation between energy frames to build an information related transformation optimizing primary photon image. One can also use computer simulation to show that a portion of low energy photons is detected at the same location (pixel) as pure primary photons. These events are for instance: photons undergoing scatter interaction in the crystal; photons undergoing a small angle backscatter or forwardscatter interaction in the medium, photons backscattered by the Pyrex into the crystal. For a 140 keV source in 10 cm of water and a 1/4 inch thick crystal, more than 6% of all the photons detected do not have the primary energy and still are located in the right 4 mm pixel. Similarly, it is possible to show that more than 5% of all the photons detected at 140 keV deposit their energy in more than one pixel. These results give additional support to techniques considering low energy photons and more sophisticated ways to segregate between good and bad events

  11. Nonisothermal Thermogravimetric Analysis of Thai Lignite with High CaO Content

    Science.gov (United States)

    Pintana, Pakamon

    2013-01-01

    Thermal behaviors and combustion kinetics of Thai lignite with different SO3-free CaO contents were investigated. Nonisothermal thermogravimetric method was carried out under oxygen environment at heating rates of 10, 30, and 50°C min−1 from ambient up to 1300°C. Flynn-Wall-Ozawa (FWO) and Kissinger-Akahira-Sunose (KAS) methods were adopted to estimate the apparent activation energy (E) for the thermal decomposition of these coals. Different thermal degradation behaviors were observed in lignites with low (14%) and high (42%) CaO content. Activation energy of the lignite combustion was found to vary with the conversion fraction. In comparison with the KAS method, higher E values were obtained by the FWO method for all conversions considered. High CaO lignite was observed to have higher activation energy than the low CaO coal. PMID:24250259

  12. Determination of hydrogen content of Jatropha biodiesel oil using neutron reflection technique

    International Nuclear Information System (INIS)

    Okunade, I. O.; Jonah, S. A.; Omede, M.

    2014-01-01

    Biofuel is an environmental-friendly alternative to fossil fuel and holds immense potential for the future energy needs of the country. Non-edible jatropha biodiesel oil has been identified as one of the suitable bio-fuel options. In this work, experimental measurements were performed to determine the total hydrogen content of jatropha oil and jatropha-synthetic diesel oil mixture. The work was carried out using a neutron reflection facility at the Centre for Energy Research and Training, Ahmadu Bello University, Zaria. Jatropha oil and jatropha-synthetic diesel mixture were subjected to experimental measurements for the purpose of determining bulk hydrogen content using neutron reflection facility that had been previously calibrated using various hydrocarbon materials of known hydrogen content. The hydrogen content of the sample were subsequently determined using their measured neutron reflection coefficient values and calibration data. In general, results obtained indicate high hydrogen content range of 10.68-12.16wt% for jatropha oil and the various jatropha-synthetic diesel mixtures. The implication of this is that jatropha oil or jatrophal-synthetic diesel mixture can be used as alternative fuel to mitigate high carbon monoxide emission.

  13. The status and prospect of new energy and renewable energy in China

    Science.gov (United States)

    Qin, Jiaxi

    2018-06-01

    Renewable energy is an important part of the energy supply system. At present, the scale of global renewable energy development and utilization continues to expand, and application costs are rapidly declining. The development of renewable energy has become the core content of many countries in promoting energy transformation and an important method to deal with the climate change. It is also a revolution in China's energy production and consumption and a promotion of energy. This article focuses on the status of the development of new energy and renewable energy in China. After analyzing the problems in China's development and understanding the related policies, we look forward to the prospects of China's future and renewable energy sources.

  14. Lipid Content in Arctic Calanus: a Matter of Season and Size

    Science.gov (United States)

    Daase, M.; Søreide, J.; Freese, D.; Hatlebakk, M. K.; Jørgen, B.; Renaud, P.; Gabrielsen, T. M.; Vogedes, D.

    2016-02-01

    Copepods of the genus Calanus are considered key elements of the marine food chain of the Arctic and North Atlantic. They convert low-energy carbohydrates and proteins of their algae diet into high-energy wax ester lipids. These lipids are accumulated over the productive season and stored in a lipid sac which sustains the organism over long periods without algal food supply, and which makes Calanus spp. an important prey item. Here we investigated what determines the variability in lipid content of overwintering stages and adults of Arctic and North Atlantic Calanus species. Using image analysis of lipid sac area, we have estimated individual lipid content of Calanus species in the waters and fjords of Svalbard (78-81oN). Data were collected all year round, at surface and deep waters and in locations under the influence of either Atlantic or Arctic hydrographic conditions. Lipid content showed stage specific seasonal variability which can be related to life history strategies and the phenology of algae blooms. Depth specific differences in lipid content were only observed at the start of the overwintering period. Our data also demonstrate that species specific differences in lipid content were not as fundamentally different as previously assumed. Rather, based on molecular identification of the species, we show that the lipid content of the Arctic C. glacialis and the Atlantic C. finmarchicus is dependent on size alone, challenging the classical understanding of these two species yielding two distinctly different ecosystem services based upon a difference in lipid content.

  15. New energy technologies 4. Energy management and energy efficiency

    International Nuclear Information System (INIS)

    Sabonnadiere, J.C.; Caire, R.; Raison, B.; Quenard, D.; Verneau, G.; Zissis, G.

    2007-01-01

    This forth tome of the new energy technologies handbook is devoted to energy management and to the improvement of energy efficiency. The energy management by decentralized generation insertion and network-driven load control, analyzes the insertion and management means of small power generation in distribution networks and the means for load management by the network with the aim of saving energy and limiting peak loads. The second part, devoted to energy efficiency presents in a detailed way the technologies allowing an optimal management of energy in buildings and leading to the implementation of positive energy buildings. A special chapter treats of energy saving using new lighting technologies in the private and public sectors. Content: 1 - decentralized power generation - impacts and solutions: threat or opportunity; deregulation; emerging generation means; impact of decentralized generation on power networks; elements of solution; 2 - mastery of energy demand - loads control by the network: stakes of loads control; choice of loads to be controlled; communication needs; measurements and controls for loads control; model and algorithm needs for loads control. A better energy efficiency: 3 - towards positive energy buildings: key data for Europe; how to convert fossil energy consuming buildings into low-energy consuming and even energy generating buildings; the Minergie brand; the PassivHaus or 'passive house' label; the zero-energy house/zero-energy home (ZEH); the zero-energy building (ZEB); the positive energy house; comparison between the three Minergie/PassivHaus/ZEH types of houses; beyond the positive energy building; 4 - light sources and lighting systems - from technology to energy saving: lighting yesterday and today; light sources and energy conversion; energy saving in the domain of lighting: study of some type-cases; what future for light sources. (J.S.)

  16. Solutions-based climate change education for K-Gray: Renewable energy and energy efficiency

    Science.gov (United States)

    Petrone, C.

    2017-12-01

    Through the National Science Foundation-funded MADE CLEAR (www.madeclear.org) climate change education project's Informal Climate Change Education (ICCE) Community, funds were received to collaboratively train teachers, informal educators, students, and university docents in climate change basics and solutions, specifically renewable energy and energy efficiency. In all, 10 docents, 50 classroom teachers, over 600 K-16 students, and several hundred science-interested citizens participated in programs and workshops lasting between one and seven hours. Using commercially available kits and other DIY projects, program participants used science content and engineering to develop models of wind turbines, wind mills, solar cells, solar cookers, solar stills, and wind-powered cars. Using thermal imaging cameras, Kill-a-Watt meters, "Carbon Food Print" kit, "Energy Matters" kit, and other tools, program participants learned about energy efficiency as not only a global climate change mitigation strategy, but also a way to save money. ICCE Community members and external partners, such as local electric cooperative personnel, university researchers, and state-sponsored energy efficiency program personnel, provided content presentations, discussions, and hands-on activities to program participants.

  17. CODATA Vade-mecum for energy

    Energy Technology Data Exchange (ETDEWEB)

    Kurti, N

    1979-03-01

    A small handbook of numerical tables, graphs, etc., but with only a minimum of explanatory text, covering broad energy categories, might be helpful for the non-specialist or novice in the energy field. While the handbook could not compete with specialist publications it could serve as a guide and handy source of specific information. A table of contents covering Primary Energy Sources, Energy Conversion, Energy Storage, Transport, and Saving, and Energy Utilization is suggested for such a handbook.

  18. Energy Services: A conceptual review

    OpenAIRE

    Fell, M.

    2017-01-01

    It is often stated that people do not desire energy itself but the ‘energy services’ it provides. Despite its importance, initial searches revealed no obviously dominant definitions of the term ‘energy services’, and inconsistent illustrative examples. This paper presents the results of a content analysis and literature review which aimed to answer the question: ‘what are energy services?’. One hundred and eighty-five articles from the journals Energy Policy and Energy Research and Social Sci...

  19. High-frequency energy in singing and speech

    Science.gov (United States)

    Monson, Brian Bruce

    While human speech and the human voice generate acoustical energy up to (and beyond) 20 kHz, the energy above approximately 5 kHz has been largely neglected. Evidence is accruing that this high-frequency energy contains perceptual information relevant to speech and voice, including percepts of quality, localization, and intelligibility. The present research was an initial step in the long-range goal of characterizing high-frequency energy in singing voice and speech, with particular regard for its perceptual role and its potential for modification during voice and speech production. In this study, a database of high-fidelity recordings of talkers was created and used for a broad acoustical analysis and general characterization of high-frequency energy, as well as specific characterization of phoneme category, voice and speech intensity level, and mode of production (speech versus singing) by high-frequency energy content. Directionality of radiation of high-frequency energy from the mouth was also examined. The recordings were used for perceptual experiments wherein listeners were asked to discriminate between speech and voice samples that differed only in high-frequency energy content. Listeners were also subjected to gender discrimination tasks, mode-of-production discrimination tasks, and transcription tasks with samples of speech and singing that contained only high-frequency content. The combination of these experiments has revealed that (1) human listeners are able to detect very subtle level changes in high-frequency energy, and (2) human listeners are able to extract significant perceptual information from high-frequency energy.

  20. Contents

    Directory of Open Access Journals (Sweden)

    Editor IJRED

    2012-11-01

    Full Text Available International Journal of Renewable Energy Development www.ijred.com Volume 1             Number 3            October 2012                ISSN 2252- 4940   CONTENTS OF ARTICLES page Design and Economic Analysis of a Photovoltaic System: A Case Study 65-73 C.O.C. Oko , E.O. Diemuodeke, N.F. Omunakwe, and E. Nnamdi     Development of Formaldehyde Adsorption using Modified Activated Carbon – A Review 75-80 W.D.P Rengga , M. Sudibandriyo and M. Nasikin     Process Optimization for Ethyl Ester Production in Fixed Bed Reactor Using Calcium Oxide Impregnated Palm Shell Activated Carbon (CaO/PSAC 81-86 A. Buasri , B. Ksapabutr, M. Panapoy and N. Chaiyut     Wind Resource Assessment in Abadan Airport in Iran 87-97 Mojtaba Nedaei       The Energy Processing by Power Electronics and its Impact on Power Quality 99-105 J. E. Rocha and B. W. D. C. Sanchez       First Aspect of Conventional Power System Assessment for High Wind Power Plants Penetration 107-113 A. Merzic , M. Music, and M. Rascic   Experimental Study on the Production of Karanja Oil Methyl Ester and Its Effect on Diesel Engine 115-122 N. Shrivastava,  , S.N. Varma and M. Pandey  

  1. A novel ternary content addressable memory design based on resistive random access memory with high intensity and low search energy

    Science.gov (United States)

    Han, Runze; Shen, Wensheng; Huang, Peng; Zhou, Zheng; Liu, Lifeng; Liu, Xiaoyan; Kang, Jinfeng

    2018-04-01

    A novel ternary content addressable memory (TCAM) design based on resistive random access memory (RRAM) is presented. Each TCAM cell consists of two parallel RRAM to both store and search for ternary data. The cell size of the proposed design is 8F2, enable a ∼60× cell area reduction compared with the conventional static random access memory (SRAM) based implementation. Simulation results also show that the search delay and energy consumption of the proposed design at the 64-bit word search are 2 ps and 0.18 fJ/bit/search respectively at 22 nm technology node, where significant improvements are achieved compared to previous works. The desired characteristics of RRAM for implementation of the high performance TCAM search chip are also discussed.

  2. Effect of Moisture Content on Mechanical Properties and Terminal Velocity of Berberis

    Directory of Open Access Journals (Sweden)

    E Velayati

    2011-09-01

    Full Text Available The study of mechanical properties of Berberis not only is useful for design and optimization of transportation, processing and packaging equipment but also can prevent mechanical injuries and losses. In this study force, deformation, energy and toughness were measured at different moisture content levels including 70-76, 45-50, 25-30 and 7-10 percent (w.b.. The decrease of moisture content caused increasing rupture force from 1.387 to 2.679 N, decreasing shape deformation from 3.387 to 2.413mm, increasing toughness from 4.297 to 8.220 J/cm3 and decreasing rupture energy from 0.921 to 0.661mJ. Effects of loading speed, force orientation and their interaction were investigated on just fresh Berberis fruit. It was indicated that only force orientation was effective on all investigated properties except toughness. The moisture content was identified as an effective parameter on terminal velocity. It decreased from 9 to 4.5 m/s with decrease of moisture content from 76 to 7 percent (w.b..

  3. Reduction of environmental and energy footprint of microalgal biodiesel production through material and energy integration.

    Science.gov (United States)

    Chowdhury, Raja; Viamajala, Sridhar; Gerlach, Robin

    2012-03-01

    The life cycle impacts were assessed for an integrated microalgal biodiesel production system that facilitates energy- and nutrient- recovery through anaerobic digestion, and utilizes glycerol generated within the facility for additional heterotrophic biodiesel production. Results show that when external fossil energy inputs are lowered through process integration, the energy demand, global warming potential (GWP), and process water demand decrease significantly and become less sensitive to algal lipid content. When substitution allocation is used to assign additional credit for avoidance of fossil energy use (through utilization of recycled nutrients and biogas), GWP and water demand can, in fact, increase with increase in lipid content. Relative to stand-alone algal biofuel facilities, energy demand can be lowered by 3-14 GJ per ton of biodiesel through process integration. GWP of biodiesel from the integrated system can be lowered by up to 71% compared to petroleum fuel. Evaporative water loss was the primary water demand driver. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. Content

    DEFF Research Database (Denmark)

    Keiding, Tina Bering

    secondary levels. In subject matter didactics, the question of content is more developed, but it is still mostly confined to teaching on lower levels. As for higher education didactics, discussions on selection of content are almost non-existent on the programmatic level. Nevertheless, teachers are forced...... curriculum, in higher education, and to generate analytical categories and criteria for selection of content, which can be used for systematic didactical reflection. The larger project also concerns reflection on and clarification of the concept of content, including the relation between content at the level......Aim, content and methods are fundamental categories of both theoretical and practical general didactics. A quick glance in recent pedagogical literature on higher education, however, reveals a strong preoccupation with methods, i.e. how teaching should be organized socially (Biggs & Tang, 2007...

  5. Human Milk Macronutrients Content: Effect of Advanced Maternal Age.

    Science.gov (United States)

    Lubetzky, Ronit; Sever, Orna; Mimouni, Francis B; Mandel, Dror

    2015-11-01

    Little is known about the effect of advanced maternal age upon macronutrients of human milk. This study was designed to study contents of macronutrients (fat, lactose, and protein) in human milk collected in the first 2 weeks of life in older (≥35 years) compared with younger (Macronutrient contents were measured at 72 hours, 7 days, and 14 days after delivery using infrared transmission spectroscopy. The groups did not differ in terms of maternal prepregnancy weight, height, and diet or infant birth weight or gestational age. They differed significantly in terms of maternal age and maternal weight after pregnancy. Fat content in colostrum and carbohydrate content in mature milk were significantly higher in the older mothers group. Moreover, carbohydrates in mature milk correlated positively with maternal age. Fat content at an infant age of 7 days and 2 weeks was not affected by maternal age. There was no significant relationship between maternal body weight for height (or body mass index) and energy, protein, fat or lactose content at any stage. Fat content of colostrum and carbohydrate content of mature milk obtained from mothers with advanced age are elevated compared with those of younger mothers. Moreover, there is a positive correlation between maternal age and carbohydrate content in mature milk. The biological significance of our findings is yet to be determined.

  6. Quantitative computed tomography for measuring bone mineral content

    International Nuclear Information System (INIS)

    Felsenberg, D.; Kalender, W.A.; Banzer, D.; Schmilinsky, G.; Heyse, M.; Fischer, E.; Schneider, U.; Siemens A.G., Erlangen; Krankenhaus Zehlendorf, Berlin

    1988-01-01

    Quantitative computed tomography (QCT) for measuring bone mineral content of lumbar vertebrae is increasingly used internationally. The effect of using conventional CT (single energy CT, SE-CT) and dual energy CT (DE-CT) on reproducibility has been examined. We defined a standard measurement protocol, which automatically evaluates a calibration phantom. This should ensure an in vivo reproducibility of 1 to 2%. Reference data, which has been obtained with this protocol from 113 normal subjects, using SE-CT ad DE-CT, are presented. (orig.) [de

  7. Measurement of thorium content in gas mantles produced in India

    Energy Technology Data Exchange (ETDEWEB)

    Gaur, P K [Bhabha Atomic Research Centre, Mumbai (India). Radiological Physics Div.; Chury, A J; Venkataraman, G [Bhabha Atomic Research Centre, Mumbai (India). Radiation Protection Services Div.

    1994-04-01

    Incandescent gas mantles, processed with thorium nitrate, were monitored for thorium content, using a 2 inch thick Nal(Tl) detector and detecting medium energy gamma radiations emitted by thorium daughters. Thirty different brands, manufactured in the country have been counted and most of them were found to contain thorium within the permissible limit specified by Atomic Energy Regulatory Board (AERB). (author). 5 refs., 1 fig., 3 tabs.

  8. Pluri-annual energy programming - The Energy transition for green growth. Synthesis

    International Nuclear Information System (INIS)

    2016-01-01

    The Energy Transition for Green Growth Act and its attendant action plans are designed to give France the means to make a more effective contribution to tackling climate change and reinforce its energy independence, while striking a better balance in its energy mix and creating jobs and business growth. This document summarizes the content of the Pluri-annual energy programming, which is the consistent action framework of the French energy transition: improving energy efficiency and reducing fossil fuels consumption, accelerating the development of renewable energy sources, maintaining a high-level of security of supply in the respect of environmental requirements, preparing tomorrow's energy system, developing clean mobility, taking account of the socio-economic issues of the energy transition and acting with the regions in this way

  9. Caffeinated Energy Drinks -- A Growing Problem

    OpenAIRE

    Reissig, Chad J.; Strain, Eric C.; Griffiths, Roland R.

    2008-01-01

    Since the introduction of Red Bull in Austria in 1987 and in the United States in 1997, the energy drink market has grown exponentially. Hundreds of different brands are now marketed, with caffeine content ranging from a modest 50 mg to an alarming 505 mg per can or bottle. Regulation of energy drinks, including content labeling and health warnings differs across countries, with some of the most lax regulatory requirements in the U.S. The absence of regulatory oversight has resulted in aggres...

  10. A Terrestrial Search for Dark Contents of the Vacuum, Such as Dark Energy, Using Atom Interferometry

    Energy Technology Data Exchange (ETDEWEB)

    Adler, Ronald J.; /Stanford U., HEPL /San Francisco State U.; Muller, Holger; /UC, Berkeley; Perl, Martin L.; /KIPAC, Menlo Park /SLAC

    2012-06-11

    We describe the theory and first experimental work on our concept for searching on earth for the presence of dark contents of the vacuum (DCV) using atom interferometry. Specifically, we have in mind any DCV that has not yet been detected on a laboratory scale, but which might manifest itself as dark energy on the cosmological scale. The experimental method uses two atom interferometers to cancel the effect of earth's gravity and diverse noise sources. It depends upon two assumptions: first, that the DCV possesses some space inhomogeneity in density, and second that it exerts a sufficiently strong nongravitational force on matter. The motion of the apparatus through the DCV should then lead to an irregular variation in the detected matter-wave phase shift. We discuss the nature of this signal and note the problem of distinguishing it from instrumental noise. We also discuss the relation of our experiment to what might be learned by studying the noise in gravitational wave detectors such as LIGO. The paper concludes with a projection that a future search of this nature might be carried out using an atom interferometer in an orbiting satellite. The laboratory apparatus is now being constructed.

  11. Nuclear energy and environment of China

    International Nuclear Information System (INIS)

    Zhang Kunmin

    1993-01-01

    The paper included following contents: China needs to develop nuclear energy; China pays attention to the radiation environment management; the role of China National Environmental Protection Agency in nuclear energy and the environment

  12. Comparison of results of assaying and neutron activation analysis when determining gold and silver content

    International Nuclear Information System (INIS)

    Vaganov, P.A.; Bulnaev, A.I.; Kulikov, V.D.; Mejer, V.A.; Zakharevich, K.V.

    1977-01-01

    Compared are results of simultaneous determination of gold and silver content in rock samples by the methods of neutron activation analysis and assaying. Rock samples were irradiated by thermal neutron flux of 5x10 13 nxcm -2 xs -1 during 12 hours. The gold content was determined in 8-12 days after irradiation, and silver content in 40-50 days. T he gold content determination was performed by 411.8 keV γ quanta of 198 Au. To establish the silver content two analytical lines of sup(110m)Ag isomer with the energy of 657.7 and 937.4 keV were used. The sensitivity threshold of Au content determination amounts to 3x10 -6 % (or 1x10 -9 g) and that for Ag is 2x10 -40 % (using γ line with the energy of 657.7 keV). The comparison of the results of assaying and neutron-activation analysis has shown for silver a good agreement between the both methods, the coefficient of pair correlation being equal to 0.997. For gold the divergence between the methods is observed. The activation analysis provides on the average lower values of gold content

  13. Investigations on the influence of radiation with variable linear energy transfer (LET) on the DNA-content and DNA-repair-mechanisms in Vicia faba

    International Nuclear Information System (INIS)

    Eckl, P.

    1981-01-01

    This study was initiated to investigate, whether there are any radiation-induced changes in DNA-content and if these changes can be repaired. Seeds of Vicia faba L. were grown in glass culture vessels. After 10 to 20 days the seedings were irradiated using a 1 C1 60 Co gammasource (90mrad/h and 33 rad/h) and a 5 mCi 252 Cf neutronsource (90 mrad/h). Both, neutron and gamma irradiation cause a reduction in nuclear DNA-content even after low doses (1 to 10 rad). The extent of depression is only depending on linear energy transfer. Parallel to the induced minimum in DNA-content, but shifted to higher doses, also the mitotic activity reaches a minimum. Whereas neutron irradiation results in a total stop after doses of 8 rad, gamma-irradiation only induces a depression of 80 %. Whith higher doses the mitotic activity increases again. The neutron-induced changes in DNA-content seem to be restored within 90 minutes after irradiation. No continuous increase could be found after low gamma-doses. Gamma-irradiation with higher dose rates ( 60 Co, 33 rad/h) causes a general decrease over the dose-range studied (100 to 1600 rad). Following doses of 100 rad the mitotic activity increases significantly. With higher doses the decrease is exponential. A dose-dependent mitotic delay could also be observed. As described by many authors, unscheduled DNA-synthesis (UDS) could not be detected in nuclei of Vicia faba. This indicates that an other system, perhaps acting in situ - at the damaged place - is responsible for the repair of radiation-induced thymine-damages. (Author)

  14. Engineering properties of sunflower seed: Effect of dehulling and moisture content

    Directory of Open Access Journals (Sweden)

    Mudasir Ahmad Malik

    2016-12-01

    Full Text Available The study diagnosed engineering properties on varying moisture content of sunflower seed and kernel from 7.6 to 25% (wet basis. On increasing moisture, dimensional values increased for both seed and kernel. Bulk density, true density and porosity were found higher for kernel as compared to seed at each moisture content. On increasing the moisture content from 7.6 to 25%, true density, porosity and thousand kernel weight increased. Coefficient of static friction on plywood was found maximum for kernel at 25% moisture content, while it was minimum for seed on glass at 7.6% moisture content. The angle of repose was maximum for kernel as compared to seed. Initial cracking force, average rupture force and average rupture energy for seed and kernel decreased with an increase in the moisture content. The kernel was found to be more resistant to initial cracking than seed.

  15. CH-TRU Content Codes (CH-TRUCON)

    International Nuclear Information System (INIS)

    2005-01-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes 'shipping categories' that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the 'General Case,' which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for 'Close-Proximity Shipments' (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for 'Controlled Shipments

  16. CH-TRU Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-10-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  17. Freedom from nuclear energy myth

    International Nuclear Information System (INIS)

    Kim, Wonsik

    2001-09-01

    This book generalizes the history of nuclear energy with lots of myths. The contents of this book are a fundamental problem of nuclear power generation, the myth that nuclear energy is infinite energy, the myth that nuclear energy overcomes the crisis of oil, the myth that nuclear energy is cheap, safe and clean, the myth that nuclear fuel can be recycled, the myth that nuclear technology is superior and the future and present of nuclear energy problem related radiation waste and surplus of plutonium.

  18. The bill project on energy transition: what will happen to renewable energies

    International Nuclear Information System (INIS)

    Darson, Alice

    2015-01-01

    The author comments and discusses the content of the French bill project on energy transition, and the controversies on this bill project within the French Parliament. She addresses the objectives of the bill project (share of renewable energies, case of overseas territories), the issue of building construction and renovation, the issue of transports (fleet size, electric vehicles, use of renewable energy), the development of renewable energies (notably for overseas territories, issue of mandatory purchase, issue of connection), the simplification and clarification of procedures, and the possibility for citizen, enterprises, territories and State to act together

  19. Changes in the energy and sodium content of main entrées in US chain restaurants from 2010 to 2011.

    Science.gov (United States)

    Wu, Helen W; Sturm, Roland

    2014-02-01

    The food environment shapes individual diets, and as food options change, energy and sodium intake may also shift. Understanding whether and how restaurant menus evolve in response to labeling laws and public health pressures could inform future efforts to improve the food environment. To track changes in the energy and sodium content of US chain restaurant main entrées between spring 2010 (when the Affordable Care Act was passed, which included a federal menu labeling requirement) and spring 2011. Nutrition information was collected from top US chain restaurants' websites, comprising 213 unique brands. Descriptive statistics and regression analysis evaluated change across main entrées overall and compared entrées that were added, removed, and unchanged. Tests of means and proportions were conducted for individual restaurant brands to see how many made significant changes. Separate analyses were conducted for children's menus. Mean energy and sodium did not change significantly overall, although mean sodium was 70 mg lower across all restaurants in added vs removed menu items at the 75th percentile. Changes were specific to restaurant brands or service model: family-style restaurants reduced sodium among higher-sodium entrées at the 75th percentile, but not on average, and entrées still far exceeded recommended limits. Fast-food restaurants decreased mean energy in children's menu entrées by 40 kcal. A few individual restaurant brands made significant changes in energy or sodium, but the vast majority did not, and not all changes were in the healthier direction. Among those brands that did change, there were slightly more brands that reduced energy and sodium compared with those that increased it. Industry marketing and pledges may create a misleading perception that restaurant menus are becoming substantially healthier, but both healthy and unhealthy menu changes can occur simultaneously. Our study found no meaningful changes overall across a 1-year time

  20. The radionuclide content of radioactive wastes

    International Nuclear Information System (INIS)

    1988-06-01

    This report presents the radionuclide content of stocks and arisings of radioactive wastes in the United Kingdom. Operational and decommissioning wastes are considered for both committed and prospective plant. Arisings are from power reactors, commercial reprocessing, fuel manufacture, medical and industrial sources and research and development. Data is included from Amersham International, British Nuclear Fuels, Central Electricity Generating Board, South of Scotland Electricity Board, United Kingdom Atomic Energy Authority and minor waste producers. (author)

  1. Multimedia content classification metrics for content adaptation

    OpenAIRE

    Fernandes, Rui; Andrade, M.T.

    2015-01-01

    Multimedia content consumption is very popular nowadays. However, not every content can be consumed in its original format: the combination of content, transport and access networks, consumption device and usage environment characteristics may all pose restrictions to that purpose. One way to provide the best possible quality to the user is to adapt the content according to these restrictions as well as user preferences. This adaptation stage can be best executed if knowledge about the conten...

  2. Multimedia content classification metrics for content adaptation

    OpenAIRE

    Fernandes, Rui; Andrade, M.T.

    2016-01-01

    Multimedia content consumption is very popular nowadays. However, not every content can be consumed in its original format: the combination of content, transport and access networks, consumption device and usage environment characteristics may all pose restrictions to that purpose. One way to provide the best possible quality to the user is to adapt the content according to these restrictions as well as user preferences. This adaptation stage can be best executed if knowledge about the conten...

  3. Observation of WC grain shapes determined by carbon content during liquid phase sintering of WC-Co alloys

    International Nuclear Information System (INIS)

    Sona Kim; Hyoun-Ee Kim; Seok-Hee Han; Jong-Ku Park

    2001-01-01

    In the composite materials of WC-Co alloys, the faceted WC grains as a hard phase are dispersed in the ductile matrix of cobalt. Properties of WC-Co alloys are affected by microstructural factors such as volume fraction of WC phase, size of WC grains, and carbon content (kinds of constituent phases). Although the properties of WC-Co alloys are inevitably affected by the shape of WC grains, the shape of WC grains has not been thrown light on the properties of WC-Co alloys yet, because it has been regarded to have a uniform shape regardless of alloy compositions. It is proved that the WC grains have various shapes varying reversibly with carbon content in the sintered WC-Co compacts. This dependency of grain shape on the carbon content is attributed to asymmetric atomic structure of WC crystal. The {10 1 - 0} prismatic planes are distinguished into two groups with different surface energy according to their atomic structures. The prismatic planes of high surface energy tend to disappear in the compacts with high carbon content. In addition, these high energy prismatic planes tend to split into low energy surfaces in the large WC grains. (author)

  4. Determination of moisture content gradient in wood by gamma-ray attenuation technique

    International Nuclear Information System (INIS)

    Aguiar, O.; Barros Ferraz, E.S. de

    1981-01-01

    A new methodology for determining water content gradients in wood was developed. It was based on the low energy gamma ray attenuation. Two equations were proposed for determining wood water content, below and above the fiber saturation point. A series of measurents of moisture content gradients in wood samples of Pinus oocarpa was made, during drying in an environment with controlled relative humidity and temperature. The water cntent gradients determination was quick, non-destructive and presented sensitivity and accuracy in moisture content range from 9% to 150%. Aspects of the application of this methodology in water diffusion and flow studies in wood are discussed. (Author) [pt

  5. Optimized tuning of contention window for IEEE 802.11 WLAN

    African Journals Online (AJOL)

    In wireless networks, the size of Contention Window (CW) plays a vital role as it changes the ... This leads to proper scheduling of transmission when more .... As a consequent, protocol overhead, processing time and energy consumption are.

  6. New energy technologies 3 - Geothermal and biomass energies

    International Nuclear Information System (INIS)

    Sabonnadiere, J.C.; Alazard-Toux, N.; His, S.; Douard, F.; Duplan, J.L.; Monot, F.; Jaudin, F.; Le Bel, L.; Labeyrie, P.

    2007-01-01

    This third tome of the new energy technologies handbook is devoted to two energy sources today in strong development: geothermal energy and biomass fuels. It gives an exhaustive overview of the exploitation of both energy sources. Geothermal energy is presented under its most common aspects. First, the heat pumps which encounter a revival of interest in the present-day context, and the use of geothermal energy in collective space heating applications. Finally, the power generation of geothermal origin for which big projects exist today. The biomass energies are presented through their three complementary aspects which are: the biofuels, in the hypothesis of a substitutes to fossil fuels, the biogas, mainly produced in agricultural-type facilities, and finally the wood-fuel which is an essential part of biomass energy. Content: Forewords; geothermal energy: 1 - geothermal energy generation, heat pumps, direct heat generation, power generation. Biomass: 2 - biofuels: share of biofuels in the energy context, present and future industries, economic and environmental status of biofuel production industries; 3 - biogas: renewable natural gas, involuntary bio-gases, man-controlled biogas generation, history of methanation, anaerobic digestion facilities or biogas units, biogas uses, stakes of renewable natural gas; 4 - energy generation from wood: overview of wood fuels, principles of wood-energy conversion, wood-fueled thermal energy generators. (J.S.)

  7. Definition of correcting factors for absolute radon content measurement formula

    International Nuclear Information System (INIS)

    Ji Changsong; Xiao Ziyun; Yang Jianfeng

    1992-01-01

    The absolute method of radio content measurement is based on thomas radon measurement formula. It was found in experiment that the systematic error existed in radon content measurement by means of thomas formula. By the analysis on the behaviour of radon daughter five factors including filter efficiency, detector construction factor, self-absorbance, energy spectrum factor, and gravity factor were introduced into the thomas formula, so that the systematic error was eliminated. The measuring methods of the five factors are given

  8. Energy policy and climate change in Turkey

    International Nuclear Information System (INIS)

    Kaygusuz, Kamil

    2003-01-01

    The problem of massive emissions of carbon dioxide (CO 2 ) from the burning of fossil fuels and their climatic impact have become major scientific and political issues. Future stabilization of the atmospheric CO 2 content requires a drastic decrease of CO 2 emissions worldwide. In this study, energy utilization and its major environmental impacts are discussed from the standpoint of sustainable development, including anticipated patterns of future energy use and subsequent environmental issues in Turkey. Several aspects relating to energy utilization, renewable energy, energy efficiency, environment and sustainable development are examined from both current and future perspectives. Turkey is an energy importing country; with more than half of the energy requirement being supplied by imports. Domestic oil and lignite reserves are limited, and the lignites are characterised by high ash, sulfur and moisture contents. Because of increasing energy consumption, air pollution is becoming a great environmental concern for the future in the country. In this regard, renewable energy resources appear to be one of the most efficient and effective solutions for sustainable energy development and environmental pollution prevention in Turkey. Turkey's geographical location has several advantages for extensive use of most of the renewable energy sources

  9. Biochemical changes and energy content of the mangrove, Rhizophora mucronata, leaves during decomposition

    Digital Repository Service at National Institute of Oceanography (India)

    Sumitra-Vijayaraghavan; Ramadhas, V.; Krishnakumari, L.; Royan, J.P.

    Decomposition of Rhizophora mucronata leaves both in the laboratory and in the field resulted in the loss of organic carbon and ash and increase in total nitrogen, organic matter, protein and caloric content. In the decomposed leaves, relatively...

  10. A Chinese-style energy transition: the new five-year plan for energy

    International Nuclear Information System (INIS)

    Cornot-Gandolphe, Sylvie

    2013-01-01

    After having recalled the six major problems identified by Chinese leaders as they assessed the past evolution of the energy market (constraints on resources, environmental and ecologic degradations due to intensive consumption, an energy efficiency to be improved, an inadequate energy infrastructure, a weak capacity of the energy industry for technological innovation, and required deeper and quicker reforms of the energy market), the author presents and comments the content of the last five-year plan for energy (some data are provided in appendix). The addressed issues are: energy consumption revised downwards and controlled, definition of ambitious objectives for the transformation of the electric system (for the coal sector, the gas sector, the oil sector, electricity production, production location and international cooperation)

  11. Energy utilization, environmental pollution and renewable energy sources in Turkey

    Energy Technology Data Exchange (ETDEWEB)

    Ocak, M.; Ocak, Z.; Bilgen, S.; Keles, S.; Kaygusuz, K. [Karadeniz Technical University, Trabzon (Turkey). Dept. of Chemistry

    2004-04-01

    In this study, energy utilization and its major environmental impacts are discussed from the standpoint of sustainable development, including anticipated patterns of future energy use and subsequent environmental issues in Turkey. Several aspects relating to energy utilization, renewable energy, energy efficiency, environment and sustainable development are examined from both current and future perspectives. Turkey is an energy importing country, more than half of the energy requirement has been supplied by imports. Domestic oil and lignite reserves are limited, and the lignites are characterised by high ash, sulfur and moisture content. Because of increasing energy consumption, environmental pollution is becoming a serious problem in the future for the country. In this regard, renewable energy resources appear to be one of the most efficient and effective solutions for sustainable energy development and environmental pollution prevention in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. Especially hydropower, biomass, geothermal, solar and wind energy should be considered and seriously supported by governments and private sectors.

  12. Energy utilization, environmental pollution and renewable energy sources in Turkey

    International Nuclear Information System (INIS)

    Ocak, M.; Ocak, Z.; Bilgen, S.; Keles, S.; Kaygusuz, K.

    2004-01-01

    In this study, energy utilization and its major environmental impacts are discussed from the standpoint of sustainable development, including anticipated patterns of future energy use and subsequent environmental issues in Turkey. Several aspects relating to energy utilization, renewable energy, energy efficiency, environment and sustainable development are examined from both current and future perspectives. Turkey is an energy importing country, more than half of the energy requirement has been supplied by imports. Domestic oil and lignite reserves are limited, and the lignites are characterised by high ash, sulfur and moisture content. Because of increasing energy consumption, environmental pollution is becoming a serious problem in the future for the country. In this regard, renewable energy resources appear to be one of the most efficient and effective solutions for sustainable energy development and environmental pollution prevention in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. Especially hydropower, biomass, geothermal, solar and wind energy should be considered and seriously supported by governments and private sectors

  13. Japan's new basic energy plan

    International Nuclear Information System (INIS)

    Duffield, John S.; Woodall, Brian

    2011-01-01

    In June 2010, the Japanese cabinet adopted a new Basic Energy Plan (BEP). This was the third such plan that the government has approved since the passage of the Basic Act on Energy Policy in 2002, and it represents the most significant statement of Japanese energy policy in more than four years, since the publication of the New National Energy Strategy (NNES) in 2006. Perhaps more than its predecessors, moreover, the new plan establishes a number of ambitious targets as well as more detailed measures for achieving those targets. Among the targets are a doubling of Japan's 'energy independence ratio,' a doubling of the percentage of electricity generated by renewable sources and nuclear power, and a 30 percent reduction in energy-related CO 2 emissions, all by 2030. This paper explains the origins of the 2010 BEP and why it was adopted. It then describes the content of the plan and how it differs from the NNES. A third section analyzes the appropriateness of the new goals and targets contained in the BEP and their feasibility, finding that achievement of many of the targets was likely to be quite challenging even before the March 2011 earthquake, tsunami, and nuclear crisis. - Highlights: → Origins of Japan's new Basic Energy Plan. → Content of Japan's new Basic Energy Plan. → Feasibility of achieving the targets in Japan's new Basic Energy Plan. → Impact of 2011 earthquake and tsunami on Japanese energy policy.

  14. I want to know future energy

    International Nuclear Information System (INIS)

    Lee, Eun Cheol

    2009-04-01

    This book introduces future energy. These are the contents ; sun light which is infinite energy, hydrogen has siblings, good point of nuclear fusion, hydrogen fueled vehicle and imaginative power, application of infinite solar energy, who discovers hydrogen, sunlight generation which can make electricity from sunlight, people against wind power generation, making energy from sea, generation using wave power, making electricity from temperature differential of sea, what is bio energy, the reason that bio energy rare uses and bio fuel that people make.

  15. Einstein's lessons for energy accounting in LCA

    NARCIS (Netherlands)

    Frischknccht, Rolf; Heijungs, Reinout; Hofstetter, Patrick

    1998-01-01

    The role and meaning of accounting for energy, including feedstock energy, is reviewed in connection to Einstein's special theory of relativity. It is argued that there is only one unambiguous interpretation of the term energy-content: The one that corresponds to mc2. The implications for life cycle

  16. Anomaly transform methods based on total energy and ocean heat content norms for generating ocean dynamic disturbances for ensemble climate forecasts

    Science.gov (United States)

    Romanova, Vanya; Hense, Andreas

    2017-08-01

    In our study we use the anomaly transform, a special case of ensemble transform method, in which a selected set of initial oceanic anomalies in space, time and variables are defined and orthogonalized. The resulting orthogonal perturbation patterns are designed such that they pick up typical balanced anomaly structures in space and time and between variables. The metric used to set up the eigen problem is taken either as the weighted total energy with its zonal, meridional kinetic and available potential energy terms having equal contributions, or the weighted ocean heat content in which a disturbance is applied only to the initial temperature fields. The choices of a reference state for defining the initial anomalies are such that either perturbations on seasonal timescales and or on interannual timescales are constructed. These project a-priori only the slow modes of the ocean physical processes, such that the disturbances grow mainly in the Western Boundary Currents, in the Antarctic Circumpolar Current and the El Nino Southern Oscillation regions. An additional set of initial conditions is designed to fit in a least square sense data from global ocean reanalysis. Applying the AT produced sets of disturbances to oceanic initial conditions initialized by observations of the MPIOM-ESM coupled model on T63L47/GR15 resolution, four ensemble and one hind-cast experiments were performed. The weighted total energy norm is used to monitor the amplitudes and rates of the fastest growing error modes. The results showed minor dependence of the instabilities or error growth on the selected metric but considerable change due to the magnitude of the scaling amplitudes of the perturbation patterns. In contrast to similar atmospheric applications, we find an energy conversion from kinetic to available potential energy, which suggests a different source of uncertainty generation in the ocean than in the atmosphere mainly associated with changes in the density field.

  17. Determining the water content in concrete by gamma scattering method

    International Nuclear Information System (INIS)

    Priyada, P.; Ramar, R.; Shivaramu

    2014-01-01

    Highlights: • Gamma scattering technique for estimation of water content in concrete is given. • The scattered intensity increases with the volumetric water content. • Attenuation correction is provided to the scattered intensities. • Volumetric water content of 137 Cs radioactive source and a high resolution HPGe detector based energy dispersive gamma ray spectrometer. Concrete samples of uniform density ≈2.4 g/cm 3 are chosen for the study and the scattered intensities found to vary with the amount of water present in the specimen. The scattered intensities are corrected for attenuation effects and the results obtained with reference to a dry sample are compared with those obtained by gravimetrical and gamma transmission methods. A good agreement is seen between gamma scattering results and those obtained by gravimetric and transmission methods within accuracy of 6% and <2% change in water content can be detected

  18. Contenu énergétique des alcools d'origine fossile ou biomasse Energy Content of Alcohols of Fossil Or Biomass Origin

    Directory of Open Access Journals (Sweden)

    Arlie J. P.

    2006-11-01

    Full Text Available En utilisant une méthode basée sur le contenu énergétique, défini comme étant la quantité d'énergie mise en oeuvre dans le processus de fabrication depuis la matière première jsuqu'au produit considéré, on compare les filières de production basées sur des matières premières soit d'origine fossile, soit d'origine biomasse. Ces filières peuvent être utilisées pour produire les divers alcools que sont le méthanol, l'éthanol et le butanol. II est montré, qu'en l'état actuel des technologies de fabrication, la comparaison énergétique est très en faveur de la filière matière première renouvelable qui fait apparaître un gain énergétique qui varie suivant les cas étudiés entre 0,1 et 1,5 tep par tonne de produit. Production routes based on raw materials from either fossil or biomass origin are compared using a method based on the energy content, which is defined as being the amount of energy implemented in the manufacturing process starting with the raw material and going to the product being considered. These routes can be used to produce different alcohols such as methanol, ethanol and butanol. Given the current state of manufacturing technologies, this article shows that an energy comparison is highly in favor of the renewable raw-material route which shows an energy gain that varies, according to the cases examined, between 0. 1 and 1. 5 tOE per ton of product.

  19. The energy crunch

    International Nuclear Information System (INIS)

    Silverberg, R.B.

    1979-01-01

    The development and progress of modern civilization has been a direct result of the ability of mankind to provide sufficient energy at a relatively low cost. Because of its high energy content, versatility and low cost, the world has become increasingly dependent on oil as an energy source. However, with population increasing at around 2% pa and energy demand increasing by more than 5% pa (i.e. doubling every 14 years) it is clear that reserves of fossil energy that were once thought to be huge will be depleted within a relatively short timespan. The author looks at the energy problem, and illustrates it with graphs on energy consumption in several countries. He also discusses the effect of the energy problem on the South African economy, the impact of the oil situation and alternative energy sources. He comes to the conclusion that energy conservation is important in that it makes available additional energy without retarding the economy, also it can be implemented in a relatively short time and it reduces many forms of pollution as well as the capital needed for energy projects

  20. Technology for Peace - Science for Mankind. Water and Energy

    Energy Technology Data Exchange (ETDEWEB)

    Gutmann, H [ed.

    1994-12-31

    This symposium volume contents articles with the following topics regarding water and energy: water management, energy, water and energy systems and waste water treatment. Environmental aspects are considered and technical solutions are presented. (Suda).

  1. Technology for Peace - Science for Mankind. Water and Energy

    International Nuclear Information System (INIS)

    Gutmann, H.

    1994-01-01

    This symposium volume contents articles with the following topics regarding water and energy: water management, energy, water and energy systems and waste water treatment. Environmental aspects are considered and technical solutions are presented. (Suda)

  2. Spherically symmetric solution and a satisfactory energy-momentum complex

    International Nuclear Information System (INIS)

    Nashed, G.G.L.

    2005-01-01

    Mikhail et al. obtained two spherically symmetric solution in Moeller tetrad theory of gravitation. They calculated their energy content and obtained a strange value for the second solution, in spite that the associated metric of these solutions is the same (the Schwarzschild metric). We use another method given bu Gibbons and Hawking to calculate the energy content of these solutions. We also obtained a strange value of energy for the second solution. Studying the requirements of the satisfactory energy-momentum complex given by Moeller we find that the second solution which behaves as 1/√r does not transform as a four-vector under Lorentz transformation

  3. Revitalize Electrical Program with Renewable Energy Focus

    Science.gov (United States)

    Karns, Robert J.

    2012-01-01

    Starting a renewable energy technology (RET) program can be as simple as shifting the teaching and learning focus of a traditional electricity program toward energy production and energy control systems. Redirecting curriculum content and delivery to address photovoltaic solar (PV solar) technology and small wind generation systems is a natural…

  4. Renewable energy atlas of the United States.

    Energy Technology Data Exchange (ETDEWEB)

    Kuiper, J.A.; Hlava, K.Greenwood, H.; Carr, A. (Environmental Science Division)

    2012-05-01

    The Renewable Energy Atlas (Atlas) of the United States is a compilation of geospatial data focused on renewable energy resources, federal land ownership, and base map reference information. It is designed for the U.S. Department of Agriculture Forest Service (USFS) and other federal land management agencies to evaluate existing and proposed renewable energy projects. Much of the content of the Atlas was compiled at Argonne National Laboratory (Argonne) to support recent and current energy-related Environmental Impact Statements and studies, including the following projects: (1) West-wide Energy Corridor Programmatic Environmental Impact Statement (PEIS) (BLM 2008); (2) Draft PEIS for Solar Energy Development in Six Southwestern States (DOE/BLM 2010); (3) Supplement to the Draft PEIS for Solar Energy Development in Six Southwestern States (DOE/BLM 2011); (4) Upper Great Plains Wind Energy PEIS (WAPA/USFWS 2012, in progress); and (5) Energy Transport Corridors: The Potential Role of Federal Lands in States Identified by the Energy Policy Act of 2005, Section 368(b) (in progress). This report explains how to add the Atlas to your computer and install the associated software; describes each of the components of the Atlas; lists the Geographic Information System (GIS) database content and sources; and provides a brief introduction to the major renewable energy technologies.

  5. Genetic association between body energy measured throughout lactation and fertility in dairy cattle.

    Science.gov (United States)

    Banos, G; Coffey, M P

    2010-02-01

    The objective of this study was to quantify the genetic association of body energy assessed throughout lactation with a cow's fertility. Nine direct and indirect body energy traits were defined at different stages of lactation. Four were daily records of energy balance, energy content, cumulative effective energy (CEE) and body condition score (BCS) calculated between lactation days 4 and 311. The other five traits included duration of negative energy balance (DNEB), rate of recovery during DNEB (RNEB), sum of negative energy balance (SNEB), nadir of energy content (NEC) and number of days from calving to NEC. Of these traits, energy balance, DNEB, RNEB and SNEB were primarily based on individual cow feed intake and milk yield, and considered direct measures of body energy. The other traits were calculated from body lipid and protein changes, predicted from BCS and live weight profiles, and were considered indirect measures of body energy. Fertility was defined by number of days between calving and commencement of luteal activity (DLA), first observed oestrus (DH) and conception (DC), and number of services per conception. A total of 957 cows in their first four lactations were considered in the study. Genetic models fitted cubic splines to define longitudinal traits (energy balance, energy content, CEE and BCS) and calculate heritability and genetic correlation with fertility. Daily heritability estimate ranges were 0.10 to 0.34, 0.35 to 0.61, 0.32 to 0.53 and 0.24 to 0.56 for energy balance, energy content, CEE and BCS, respectively, and, in most cases, tended to increase towards the middle of lactation and remain relatively stable thereafter. Of the other body energy traits, heritability of NEC (0.44) was the most notable. Statistically significant (P body energy have the strongest genetic association with cow fertility. NEC and early lactation (circa day 50) BCS and energy content are the most useful traits for selection in terms of the correlated improvement

  6. 10 CFR 52.157 - Contents of applications; technical information in final safety analysis report.

    Science.gov (United States)

    2010-01-01

    ...; technical information in final safety analysis report. The application must contain a final safety analysis... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.157 Section 52.157 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

  7. 10 CFR 52.79 - Contents of applications; technical information in final safety analysis report.

    Science.gov (United States)

    2010-01-01

    ...; technical information in final safety analysis report. (a) The application must contain a final safety... 10 Energy 2 2010-01-01 2010-01-01 false Contents of applications; technical information in final safety analysis report. 52.79 Section 52.79 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) LICENSES...

  8. CH-TRU Waste Content Codes (CH-TRUCON)

    International Nuclear Information System (INIS)

    2007-01-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes 'shipping categories' that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the 'General Case,' which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for 'Close-Proximity Shipments' (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for 'Controlled Shipments

  9. CH-TRU Waste Content Codes (CH-TRUCON)

    International Nuclear Information System (INIS)

    2006-01-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes 'shipping categories' that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the 'General Case,' which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for 'Close-Proximity Shipments' (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for 'Controlled Shipments

  10. CH-TRU Waste Content Codes (CH-TRUCON)

    International Nuclear Information System (INIS)

    2005-01-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes 'shipping categories' that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the 'General Case,' which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for 'Close-Proximity Shipments' (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for 'Controlled Shipments

  11. CH-TRU Waste Content Codes (CH-TRUCON)

    International Nuclear Information System (INIS)

    2004-01-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes 'shipping categories' that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the 'General Case,' which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for 'Close-Proximity Shipments' (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for 'Controlled Shipments

  12. CH-TRU Waste Content Codes (CH-TRUCON)

    International Nuclear Information System (INIS)

    2008-01-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes 'shipping categories' that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the 'General Case,' which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for 'Close-Proximity Shipments' (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for 'Controlled Shipments

  13. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-09-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  14. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-05-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  15. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2007-02-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  16. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-06-20

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  17. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-06-20

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  18. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-01-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codesand corresponding shipping categories for "Controlled Shipments

  19. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-12-20

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  20. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-08-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  1. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2006-01-18

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  2. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2004-10-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  3. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-03-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  4. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2007-09-20

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  5. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2007-08-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  6. CH-TRU Waste Content Codes (CH TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2004-12-01

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  7. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-11-20

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  8. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-12-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  9. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-01-30

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  10. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2005-08-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  11. CH-TRU Waste Content Codes (CH-TRUCON)

    Energy Technology Data Exchange (ETDEWEB)

    Washington TRU Solutions LLC

    2007-06-15

    The CH-TRU Waste Content Codes (CH-TRUCON) document describes the inventory of the U.S. Department of Energy (DOE) CH-TRU waste within the transportation parameters specified by the Contact-Handled Transuranic Waste Authorized Methods for Payload Control (CH-TRAMPAC). The CH-TRAMPAC defines the allowable payload for the Transuranic Package Transporter-II (TRUPACT-II) and HalfPACT packagings. This document is a catalog of TRUPACT-II and HalfPACT authorized contents and a description of the methods utilized to demonstrate compliance with the CH-TRAMPAC. A summary of currently approved content codes by site is presented in Table 1. The CH-TRAMPAC describes "shipping categories" that are assigned to each payload container. Multiple shipping categories may be assigned to a single content code. A summary of approved content codes and corresponding shipping categories is provided in Table 2, which consists of Tables 2A, 2B, and 2C. Table 2A provides a summary of approved content codes and corresponding shipping categories for the "General Case," which reflects the assumption of a 60-day shipping period as described in the CH-TRAMPAC and Appendix 3.4 of the CH-TRU Payload Appendices. For shipments to be completed within an approximately 1,000-mile radius, a shorter shipping period of 20 days is applicable as described in the CH-TRAMPAC and Appendix 3.5 of the CH-TRU Payload Appendices. For shipments to WIPP from Los Alamos National Laboratory (LANL), Nevada Test Site, and Rocky Flats Environmental Technology Site, a 20-day shipping period is applicable. Table 2B provides a summary of approved content codes and corresponding shipping categories for "Close-Proximity Shipments" (20-day shipping period). For shipments implementing the controls specified in the CH-TRAMPAC and Appendix 3.6 of the CH-TRU Payload Appendices, a 10-day shipping period is applicable. Table 2C provides a summary of approved content codes and corresponding shipping categories for "Controlled Shipments

  12. Energy exchangers with LCT as a precision method for diet control in LCHADD.

    Science.gov (United States)

    Mozrzymas, Renata; Konikowska, Klaudia; Regulska-Ilow, Bożena

    2017-01-01

    Long-chain 3-hydroxyacyl-CoA dehydrogenase deficiency (LCHADD) is a rare genetic disease. The LCHADD treatment is mainly based on special diet. In this diet, energy from long-chain triglycerides (LCT) cannot exceed 10%, however energy intake from the consumption of medium-chain triglycerides (MCTs) should increase. The daily intake of energy should be compatible with energy requirements and treatment should involve frequent meals including during the night to avoid periods of fasting. In fact, there are no recommendations for total content of LCT in all of the allowed food in the LCHADD diet. The aim of the study was to present a new method of diet composition in LCHADD with the use of blocks based on energy exchangers with calculated LCT content. In the study, the diet schema was shown for calculating the energy requirements and LCT content in the LCHADD diet. How to create the diet was also shown, based on a food pyramid developed for patients with LCHADD. The blocks will make it possible, in a quick and simple way, to create a balanced diet which provides adequate energy value, essential nutrients and LCT content. This method can be used by doctors and dietitians who specialize in treating rare metabolic diseases. It can also be used by patients and their families for accurate menu planning with limited LCT content.

  13. Path analysis of the energy density of wood in eucalyptus clones.

    Science.gov (United States)

    Couto, A M; Teodoro, P E; Trugilho, P F

    2017-03-16

    Path analysis has been used for establishing selection criteria in genetic breeding programs for several crops. However, it has not been used in eucalyptus breeding programs yet. In the present study, we aimed to identify the wood technology traits that could be used as the criteria for direct and indirect selection of eucalyptus genotypes with high energy density of wood. Twenty-four eucalyptus clones were evaluated in a completely randomized design with five replications. The following traits were assessed: basic wood density, total extractives, lignin content, ash content, nitrogen content, carbon content, hydrogen content, sulfur content, oxygen content, higher calorific power, holocellulose, and energy density. After verifying the variability of all evaluated traits among the clones, a two-dimensional correlation network was used to determine the phenotypic patterns among them. The obtained coefficient of determination (0.94) presented a higher magnitude in relation to the effect of the residual variable, and it served as an excellent model for explaining the genetic effects related to the variations observed in the energy density of wood in all eucalyptus clones. However, for future studies, we recommend evaluating other traits, especially the morphological traits, because of the greater ease in their measurement. Selecting clones with high basic density is the most promising strategy for eucalyptus breeding programs that aim to increase the energy density of wood because of its high heritability and magnitude of the cause-and-effect relationship with this trait.

  14. Measuring ash content of coal

    International Nuclear Information System (INIS)

    Clayton, C.G.; Wormald, M.R.

    1980-01-01

    An apparatus for measuring the ash content of coal is claimed. It comprises a means for irradiating a known quantity of coal in a transport container with a known dose of neutrons, a means for detecting γ-rays having a predetermined energy emitted by the irradiated coal, the γ-rays being indicative of the presence of an ash-forming element in the coal, a means for producing a signal related to the intensity of the γ-ray emission and a means responsive to the signal to provide an indication of the concentration of the ash-forming element in the coal

  15. The role of content marketing in social media content communities

    Directory of Open Access Journals (Sweden)

    Charmaine du Plessis

    2017-10-01

    Full Text Available Background: Content marketing has become a leading marketing technique in digital marketing communication and uses the point of view of consumers to build relationships by creating and sharing engaging content in social media that enhance their daily lives. Existing research on social media communities has focused mainly on social media marketing and virtual brand community perspectives while content marketing’s valuable and unobtrusive role in social media content communities has largely been overlooked. Objective: The purpose of this article was to investigate content marketing’s role in social media content communities to engage with the target audience in an innate manner. Method: This study made use of a directed, inductive content analysis of 51 practitioner documents relating to business-to-consumer content marketing practices to add another perspective to existing research on communities in social media. The content analysis was facilitated by using QDA Miner, a widely adopted and reliable qualitative data analysis software programme. Results: Three categories emerged from the data namely building content communities, platform-specific content and understanding channels. These categories provide sufficient evidence of how brands make use of social media content communities to connect with the target audience in an unobtrusive manner, in addition to being present in virtual brand communities. Conclusion: The findings make several contributions to the existing literature. Firstly, it provides a clearer distinction between brand and social media content communities. Secondly, it extends conceptions about social media communities to include content communities and, thirdly, it provides sufficient evidence of how content marketing could benefit a brand by naturally becoming part of social media conversations.

  16. Encyclopaedia of energy. Six volume set, 1-6

    Energy Technology Data Exchange (ETDEWEB)

    Cleveland, C.; Ayres, R.; Costanza, R.; Goldemberg, J. (and others) [Boston University, MA (US). Center for Energy and Environmental Studies

    2004-07-01

    The Encyclopaedia provides information about all aspects of energy. It is written by leading international authorities (approximately 400 authors). Contents are: Basics of Energy; Energy Flows; Society and Energy; History and Energy; Systems of Energy; Conservation and End Use; Renewable and Alternative Sources; Environmental Issues; Public Issues; Policy Issues; Economics of Energy; Measurement and Models; Material Use and Reuse; Oil and Natural Gas; Coal, Electricity; Nuclear Energy; Risks; Sustainable Development; Global Issues; Appendices.

  17. In situ measurement of ash content by neutron activation analysis

    International Nuclear Information System (INIS)

    Chrusciel, E.; Palka, K.; Makhabane, J.L.

    1991-01-01

    The paper presents the results of spectrometric neutron activation logging. A scintillation spectrometer with the source-to-detector spacing of 1.5 m, together with a Po-Be neutron source, with the yield of about 10 7 n/s, were used to measure the intensity of gamma rays in two energy windows during continuous logging. The first energy window of 300 keV width was centered at the 843 keV energy and the second - of 500 keV width at 1779 keV. For ash content varying between 5-35 wt % the mean standard deviation was 2.5 wt %. (author). 22 refs, 6 figs, 1 tab

  18. Solid-soluted content of cerium in solid solution of sphene

    International Nuclear Information System (INIS)

    Zhao Wei; Teng Yuancheng; Li Yuxiang; Ren Xuetan; Huang Junjun

    2010-01-01

    The sphene solid solution was synthesized by solid-state method,with calcium carbonate, silica, titanium dioxide, cerium oxalate and alumina as raw materials. The solid-soluted content of cerium in sphene was researched by means of X-ray diffraction (XRD), backscattering scanning electron microscopy (BSE), energy dispersive spectroscopy (EDS) and so on. The influence of A l3+ ion introduction to sphene on the solid-soluted content of cerium in sphene solid solution was studied. The results indicate that when introducing Al 3+ to sphene as electrovalence compensation, Ce 4+ could be well solidified to Ca 1-x Ce x Ti 1-2x A l2x SiO 5 , and the solid-soluted content is approximately 12.61%. With no electrovalence compensation, Ce 4+ could be solidified to Ca 1-2x Ce x TiSiO 5 , and the solid-soluted content is approximately 10.98%. The appropriate synthesis temperature of sphene solid solution is 1 260 degree C.(authors)

  19. Increased mitochondrial content in remyelinated axons: implications for multiple sclerosis

    Science.gov (United States)

    Zambonin, Jessica L.; Zhao, Chao; Ohno, Nobuhiko; Campbell, Graham R.; Engeham, Sarah; Ziabreva, Iryna; Schwarz, Nadine; Lee, Sok Ee; Frischer, Josa M.; Turnbull, Doug M.; Trapp, Bruce D.; Lassmann, Hans; Franklin, Robin J. M.

    2011-01-01

    Mitochondrial content within axons increases following demyelination in the central nervous system, presumably as a response to the changes in energy needs of axons imposed by redistribution of sodium channels. Myelin sheaths can be restored in demyelinated axons and remyelination in some multiple sclerosis lesions is extensive, while in others it is incomplete or absent. The effects of remyelination on axonal mitochondrial content in multiple sclerosis, particularly whether remyelination completely reverses the mitochondrial changes that follow demyelination, are currently unknown. In this study, we analysed axonal mitochondria within demyelinated, remyelinated and myelinated axons in post-mortem tissue from patients with multiple sclerosis and controls, as well as in experimental models of demyelination and remyelination, in vivo and in vitro. Immunofluorescent labelling of mitochondria (porin, a voltage-dependent anion channel expressed on all mitochondria) and axons (neurofilament), and ultrastructural imaging showed that in both multiple sclerosis and experimental demyelination, mitochondrial content within remyelinated axons was significantly less than in acutely and chronically demyelinated axons but more numerous than in myelinated axons. The greater mitochondrial content within remyelinated, compared with myelinated, axons was due to an increase in density of porin elements whereas increase in size accounted for the change observed in demyelinated axons. The increase in mitochondrial content in remyelinated axons was associated with an increase in mitochondrial respiratory chain complex IV activity. In vitro studies showed a significant increase in the number of stationary mitochondria in remyelinated compared with myelinated and demyelinated axons. The number of mobile mitochondria in remyelinated axons did not significantly differ from myelinated axons, although significantly greater than in demyelinated axons. Our neuropathological data and findings in

  20. The determination of mercury content in the biomass untended for industrial power plant

    Directory of Open Access Journals (Sweden)

    Wiktor Magdalena

    2017-01-01

    Full Text Available Biomass is one of the oldest and most widely used renewable energy sources. The biomass is the whole organic matter of vegetable or animal origin which is biodegradable. Biomass includes leftovers from agricultural production, forestry residues, and industrial and municipal waste. The use of biomass in the power industry has become a standard and takes place in Poland and other European countries. This paper discusses the correlation of mercury content in different biomass types used in the power industry and in products of biomass combustion. Different biomass types, which are currently burned in a commercial power plant in Poland, were discussed. A photographic documentation of different biomass types, such as straw briquettes, wood briquettes, pellets from energy crops (sunflower husk and wood husk, wood pellets, wood chips, and agro-biomass (seeds was carried out. The presented paper discusses the results obtained for 15 biomass samples. Five selected biomass samples were burned in controlled conditions in the laboratory at the University of Silesia. The ash resulting from the combustion of five biomass samples was tested for mercury content. A total of twenty biomass samples and its combustion products were tested. Based on the obtained results, it was found that any supply of biomass, regardless of its type, is characterized by variable mercury content in dry matter. In the case of e.g. wood chips, the spread of results reaches 235.1 μm/kg (in dry matter. Meanwhile, the highest mercury content, 472.4 μm/kg (in dry matter was recorded in the biomass of straw, wood pellets, and pellets from energy crops (sunflower husk. In the case of combustion products of five selected biomass types, a three or four fold increase in the mercury content has been observed.

  1. Chemical and nutritional content of Opuntia ficus-indica (L.)

    African Journals Online (AJOL)

    my mord

    2013-05-22

    May 22, 2013 ... Moisture and ash contents, crude fibre, energy values, non-reducing sugars, ... C. Total carbohydrates were obtained by calculation. ... varied widely between 12 to 92%. ... However, irrespective of the origin or variety, these fruits are a good .... Crude fat was less than 0.1% except in A (0.40 ± 0)%. The low.

  2. Energy density of lake whitefish Coregonus clupeaformis in Lakes Huron and Michigan

    Science.gov (United States)

    Pothoven, S.A.; Nalepa, T.F.; Madenjian, C.P.; Rediske, R.R.; Schneeberger, P.J.; He, J.X.

    2006-01-01

    We collected lake whitefish Coregonus clupeaformis off Alpena and Tawas City, Michigan, USA in Lake Huron and off Muskegon, Michigan USA in Lake Michigan during 2002–2004. We determined energy density and percent dry weight for lake whitefish from both lakes and lipid content for Lake Michigan fish. Energy density increased with increasing fish weight up to 800 g, and then remained relatively constant with further increases in fish weight. Energy density, adjusted for weight, was lower in Lake Huron than in Lake Michigan for both small (≤800 g) and large fish (>800 g). Energy density did not differ seasonally for small or large lake whitefish or between adult male and female fish. Energy density was strongly correlated with percent dry weight and percent lipid content. Based on data from commercially caught lake whitefish, body condition was lower in Lake Huron than Lake Michigan during 1981–2003, indicating that the dissimilarity in body condition between the lakes could be long standing. Energy density and lipid content in 2002–2004 in Lake Michigan were lower than data for comparable sized fish collected in 1969–1971. Differences in energy density between lakes were attributed to variation in diet and prey energy content as well as factors that affect feeding rates such as lake whitefish density and prey abundance.

  3. The effect of post-exercise drink macronutrient content on appetite and energy intake.

    Science.gov (United States)

    Clayton, David J; Stensel, David J; Watson, Phillip; James, Lewis J

    2014-11-01

    Carbohydrate and protein ingestion post-exercise are known to facilitate muscle glycogen resynthesis and protein synthesis, respectively, but the effects of post-exercise nutrient intake on subsequent appetite are unknown. This study aimed to investigate whether protein induced satiety that has been reported at rest was still evident when pre-loads were consumed in a post-exercise context. Using a randomised, double blind, crossover design, 12 unrestrained healthy males completed 30 min of continuous cycling exercise at ~60% VO2peak, followed by five, 3 min intervals at ~85% VO2peak. Ten min post-exercise, subjects consumed 500 ml of either a low energy placebo (15 kJ) (PLA); a 6% whey protein isolate drink (528 kJ) (PRO); or a 6% sucrose drink (528 kJ) (CHO). Sixty min after drink ingestion, a homogenous ad-libitum pasta lunch was provided and energy intake at this lunch was quantified. Subjective appetite ratings were measured at various stages of the protocol. Energy consumed at the ad-libitum lunch was lower after PRO (5831 ± 960 kJ) than PLA (6406 ± 492 kJ) (P0.315). Considering the post-exercise drink, total energy intake was not different between trials (P=0.383). There were no differences between trials for any of the subjective appetite ratings. The results demonstrate that where post-exercise liquid protein ingestion may enhance the adaptive response of skeletal muscle, this may be possible without affecting gross energy intake relative to consuming a low energy drink. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Proceedings of the 11th forum: Croatian Energy Day: Regulation problems relating to energy service markets

    International Nuclear Information System (INIS)

    2002-01-01

    The main goals of the majority of processes and developments relating to energy sectors of today present the enhancement of energy sector efficiency, ensuring of stable financial sources and safe return of the means invested through practice of activities at the market of energy and energy services, i.e. public services or monopoly. This is to be achieved by means of energy sector restructuring and liberalisation, pluralism of ownership and transparency of the organisational and management scheme. Thereby, an important role and significance for the realisation of these aims, for the development and energy market functioning on the national level, as well as for the achievement of reciprocity and complementarity of national markets with regional and multi-national energy markets, is held by models and forms of energy activity regulation. In a limited sense, the regulation itself should constitute an adequate stimulating framework for free energy flows, transparent and non- discriminating conditions for the utilisation of transmission and transportation systems and networks, protection of supplier choice rights, pluralism of ownership and ownership rights, protection of energy and energy services' quality, environmental protection, protection of purchasers and consumers and protection of energy subjects. For all these reasons, aspects and problems appertaining to energy sector and energy activities' regulation have been chosen as the theme and contents of the 11th Forum. Various countries have undertaken and implemented or are in the process of implementation of different models and contents referring to energy sector and energy activity regulation. Experience and legislative practice are quoted as the main criteria. The aim of this Forum is to set forth and clarify experiences and solutions connected to the regulation of energy activities in numerous European countries or in the world

  5. IMPACT OF BIOSLUDGE APPLICATION ON HEAVY METALS CONTENT IN SUNFLOWER

    Directory of Open Access Journals (Sweden)

    Marek Slávik

    2012-02-01

    Full Text Available The application of decomposed substrate after continual biogas production is one of the possible ways how to use alternative energy sources with following monitoring of its complex influence on the hygienic state of soil with the emphasis on heavy metal input. The substances from bilge and drain sediments from water panels, also biosludge gained by continual co-fermentation of animal excrements belong to these compounds. The biosludge application is connected with possible risk of cadmium and lead, also other risky elements input into the soil. The analyses of applicated sludge prove that the determined heavy metals contents are compared with limitary value. These facts - hygienic state of soil, pH influence this limitary value and biosludge is suitable for soil application. The total heavy metals content in soil is related to the increased cadmium, nickel, chromium and cobalt contents. The analyses of heavy metals contents in sunflower seeds show that the grown yield does not comply with the legislative norms from the stand point of heavy metals content due to high zinc and nickel contents. Copper, cadmium, lead, chromium contents fulfil limitary values, for cobalt content the value is not mentioned in Codex Alimentarius. The nickel value in the control variant seeds is 2.2 times higher than the highest acceptable amount, then in variant where the sludge was applicated the nickel content was increased by 1.6 times. In the case of zinc there was increasing content in individual variants 4.7, or 4.8 times. The direct connection with the higher accumulation of zinc and nickel in soil by the influence of biosludge application is not definitely surveyed, the increased heavy metals contents in sunflower were primarily caused by their increased contents in soils.

  6. Analysis of Selected Environmental Indicators in the Cultivation System of Energy Crops

    Directory of Open Access Journals (Sweden)

    Šoltysová Božena Š

    2017-11-01

    Full Text Available The changes of selected chemical parameters were observed in Gleyic Fluvisols. The field experiment was established as a twofactor experiment with four energy crops (Arundo donax L., Miscanthus × giganteus, Elymus elongatus Gaertner, Sida hermafrodita and two variants of fertilization (nitrogen fertilization in rate 60 kg ha-1, without nitrogen fertilization. Soil samples were taken from the depth of 0 to 0.3 m at the beginning of the experiment in the autumn 2012 and at the end of reference period in the autumn 2015. Land management conversion from market crops to perennial energy crops cultivation has influenced changes of selected soil chemical parameters. The contents of soil organic carbon were affected by cultivated energy crops differently. It was found out that Arundo increased the organic carbon content and Miscanthus, Elymus and Sida decreased its content. At the same time, the same impact of the crops on content of available phosphorus and potassium and soil reaction was found. It was recorded that each cultivated crop decreased the soil reaction and available phosphorus content and increased the content of available potassium.

  7. Cross-sectional surveys of the amount of sugar, energy and caffeine in sugar-sweetened drinks marketed and consumed as energy drinks in the UK between 2015 and 2017: monitoring reformulation progress.

    Science.gov (United States)

    Hashem, Kawther M; He, Feng J; MacGregor, Graham A

    2017-12-14

    To investigate the sugar, energy and caffeine content of sugar-sweetened drinks marketed and consumed as energy drinks available in the UK. We carried out a cross-sectional survey in 2015 and 2017 of energy drinks available in the main UK retailers. The sugar (sugars g/100 mL), energy (kcal/100 mL), caffeine (mg/100 mL) and serving size were collected from product packaging and nutrition information panels of energy drinks available in the nine main UK grocery retailers, three health and beauty retailers and one convenience store. The number of formulations (per 100 mL) and number of products (per serving) have fallen (from 75 to 49 and from 90 to 59) between 2015 and 2017, respectively. Energy drinks surveyed showed a 10% reduction in sugar, from 10.6 to 9.5 g/100 mL (P=0.011) and a 6% reduction in energy content (P=0.005) per 100 mL between 2015 and 2017. The average caffeine content of energy drinks, with a warning label, has remained high at 31.5±0.9 in 2015 and 31.3±1.0 mg/100 mL in 2017. Despite there being reductions, sugar, energy and caffeine content remain at concerning levels in 2017. To reduce the harmful impact of energy drinks, further reduction in sugar and a reduction in caffeine by reformulation are urgently needed. Other measures such as ban on the sale of energy drinks to children and smaller product sizes should also be explored, while warning labels should be kept. A reduction in sugar, energy and caffeine content and overall energy drinks consumption could be beneficial in reducing sugar, energy and caffeine intake of consumers of energy drinks. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  8. Accuracy of lateral dual energy X-ray absorptiometry for the determination of bone mineral content in the thoracic and lumbar spine: an in vitro study

    Energy Technology Data Exchange (ETDEWEB)

    Edmondston, S.J. (Curtin Univ., Perth (Australia). Dept. of Physiotherapy); Singer, K.P. (Royal Perth Hospital, WA (Australia) Curtin Univ., Perth (Australia). Dept. of Physiotherapy); Price, R.I. (Sir Charles Gairdner Hospital, Perth (Australia)); Breidahl, P.D. (Royal Perth Hospital, WA (Australia))

    1993-04-01

    Lateral scanning with dual energy X-ray absorptiometry (DXA) was undertaken on 153 thoracic and lumbar vertebral bodies from nine individuals (mean age 67; range 34-92 years) to establish their bone mineral content (BMC). All specimens were subsequently de-fatted and ashed to compare ash weight with BMC of the T1 to L5 segments. Linear regression analysis indicated a higher correlation between BMC and measured ash weights for each vertebral column (range: r = 0.97-0.99), with error analysis for all vertebrae tested showing a standard error of 0.40 g, or 10.8%. For the L2-4 segments the accuracy error was 0.50 g or 7.9%. In both cases there was a mean trend towards underestimation of ash weight. Mean BMC values of the T1 to T5 segments were similar before a progressive increase caudally. These data affirm the utility of DXA for determining bone mineral content in the vertebral column across wide ranges of age, and segmental and bone density. (Author).

  9. Accuracy of lateral dual energy X-ray absorptiometry for the determination of bone mineral content in the thoracic and lumbar spine: an in vitro study

    International Nuclear Information System (INIS)

    Edmondston, S.J.; Breidahl, P.D.

    1993-01-01

    Lateral scanning with dual energy X-ray absorptiometry (DXA) was undertaken on 153 thoracic and lumbar vertebral bodies from nine individuals (mean age 67; range 34-92 years) to establish their bone mineral content (BMC). All specimens were subsequently de-fatted and ashed to compare ash weight with BMC of the T1 to L5 segments. Linear regression analysis indicated a higher correlation between BMC and measured ash weights for each vertebral column (range: r = 0.97-0.99), with error analysis for all vertebrae tested showing a standard error of 0.40 g, or 10.8%. For the L2-4 segments the accuracy error was 0.50 g or 7.9%. In both cases there was a mean trend towards underestimation of ash weight. Mean BMC values of the T1 to T5 segments were similar before a progressive increase caudally. These data affirm the utility of DXA for determining bone mineral content in the vertebral column across wide ranges of age, and segmental and bone density. (Author)

  10. Determination of Caffeine Content in Non-Alcoholic Beverages and ...

    African Journals Online (AJOL)

    It was found that Burn®, XL energy drink® and Red Bull® had the highest amount of caffeine. It was however noted that though most of the non-alcoholic beverages had high caffeine content they had no label claim. Key Words: Reverse Phase High Performance Liquid chromatography (HPLC), Ultra violet visible (UV/VIS), ...

  11. Energy utilisation of broiler chickens in response to guanidinoacetic acid supplementation in diets with various energy contents.

    Science.gov (United States)

    Ale Saheb Fosoul, Sayed Sadra; Azarfar, Arash; Gheisari, Abbasali; Khosravinia, Heshmatollah

    2018-07-01

    This experiment was conducted to investigate the effects of guanidinoacetic acid (GAA) on productive performance, intestinal morphometric features, blood parameters and energy utilisation in broiler chickens. A total of 390 male broiler chicks (Ross 308) were assigned to six dietary treatments based on a factorial arrangement (2×3) across 1-15 and 15-35-d periods. Experimental treatments consisted of two basal diets with standard (STD; starter: 12·56 MJ/kg and grower: 12·97 MJ/kg) and reduction (LME; starter: 11·93 MJ/kg and grower: 12·33 MJ/kg) of apparent metabolisable energy (AME) requirement of broiler chickens each supplemented with 0, 0·6 and 1·2 g/kg GAA. Supplemental 1·2 g/kg GAA decreased the negative effects of feed energy reduction on weight gain across starter, growing and the entire production phases (PEnergy retention as fat and total energy retention were increased when birds received LME diets supplemented with 1·2 g/kg GAA (Penergy for production (NEp) and total heat production increased in birds fed LME diets containing 1·2 g/kg GAA (P<0·05). A significant correlation was observed between dietary NEp and weight gain of broilers (r 0·493; P=0·0055), whereas this relationship was not seen with AME. Jejunal villus height and crypt depth were lower in birds fed LME diets (P<0·05). Serum concentration of creatinine increased in broilers fed LME diets either supplemented with 1·2 g/kg GAA or without GAA supplementation (P<0·05). Supplemental GAA improved performance of chickens fed LME diet possibly through enhanced dietary NEp. The NEp could be preferred over the AME to assess response of broiler chickens to dietary GAA supplementation.

  12. Heavy metal content in ash of energy crops growing in sewage-contaminated natural wetlands: Potential applications in agriculture and forestry?

    International Nuclear Information System (INIS)

    Bonanno, Giuseppe; Cirelli, Giuseppe Luigi; Toscano, Attilio; Giudice, Rosa Lo; Pavone, Pietro

    2013-01-01

    One of the greatest current challenges is to find cost-effective and eco-friendly solutions to the ever increasing needs of modern society. Some plant species are suitable for a multitude of biotechnological applications such as bioenergy production and phytoremediation. A sustainable practice is to use energy crops to clean up polluted lands or to treat wastewater in constructed wetlands without claiming further arable land for biofuel production. However, the disposal of combustion by-products may add significant costs to the whole process, especially when it deals with toxic waste. This study aimed to investigate the possibility of recycling ash from energy biomass as a fertilizer for agriculture and forestry. In particular, the concentrations of Cd, Cr, Cu, Mn, Pb and Zn were analyzed in the plant tissues and corresponding ash of the grasses Phragmites australis and Arundo donax, collected in an urban stream affected by domestic sewage. Results showed that the metal concentration in ash is 1.5–3 times as high as the values in plant tissues. However, metal enriched ash showed much lower element concentrations than the legal limits for ash reutilization in agriculture and forestry. This study found that biomass ash from constructed wetlands may be considered as a potential fertilizer rather than hazardous waste. Energy from biomass can be a really sustainable and clean option not only through the reduction of greenhouse gas emissions, but also through ash recycling for beneficial purposes, thus minimizing the negative impacts of disposal. - Highlights: • Metal content in ash reflects the element concentrations in Phragmites australis and Arundo donax. • Metal enriched ash of both species may be recycled as fertilizers in agriculture and forestry. • Constructed wetlands may produce a large amount of plant ash-based fertilizers from P. australis and A. donax

  13. Heavy metal content in ash of energy crops growing in sewage-contaminated natural wetlands: Potential applications in agriculture and forestry?

    Energy Technology Data Exchange (ETDEWEB)

    Bonanno, Giuseppe, E-mail: bonanno.giuseppe@unict.it [Department of Biological, Geological and Environmental Sciences, University of Catania, Via Longo 19, 95125, Catania (Italy); Cirelli, Giuseppe Luigi; Toscano, Attilio [Department of Agri-Food and Environmental Systems Management, University of Catania, Via Santa Sofia 100, 95123, Catania (Italy); Giudice, Rosa Lo; Pavone, Pietro [Department of Biological, Geological and Environmental Sciences, University of Catania, Via Longo 19, 95125, Catania (Italy)

    2013-05-01

    One of the greatest current challenges is to find cost-effective and eco-friendly solutions to the ever increasing needs of modern society. Some plant species are suitable for a multitude of biotechnological applications such as bioenergy production and phytoremediation. A sustainable practice is to use energy crops to clean up polluted lands or to treat wastewater in constructed wetlands without claiming further arable land for biofuel production. However, the disposal of combustion by-products may add significant costs to the whole process, especially when it deals with toxic waste. This study aimed to investigate the possibility of recycling ash from energy biomass as a fertilizer for agriculture and forestry. In particular, the concentrations of Cd, Cr, Cu, Mn, Pb and Zn were analyzed in the plant tissues and corresponding ash of the grasses Phragmites australis and Arundo donax, collected in an urban stream affected by domestic sewage. Results showed that the metal concentration in ash is 1.5–3 times as high as the values in plant tissues. However, metal enriched ash showed much lower element concentrations than the legal limits for ash reutilization in agriculture and forestry. This study found that biomass ash from constructed wetlands may be considered as a potential fertilizer rather than hazardous waste. Energy from biomass can be a really sustainable and clean option not only through the reduction of greenhouse gas emissions, but also through ash recycling for beneficial purposes, thus minimizing the negative impacts of disposal. - Highlights: • Metal content in ash reflects the element concentrations in Phragmites australis and Arundo donax. • Metal enriched ash of both species may be recycled as fertilizers in agriculture and forestry. • Constructed wetlands may produce a large amount of plant ash-based fertilizers from P. australis and A. donax.

  14. Brazilian energy balance 2008 - year 2007

    International Nuclear Information System (INIS)

    2008-01-01

    The Brazilian energy balance - BEB - is divided into eight chapters and eleven annexes, whose contents are as follow: chapter 1 - energy analysis and aggregated data; chapter 2 - energy supply and demand by source; chapter 3 - energy consumption by sector; chapter 4 - energy imports and exports; chapter 5 - balance of transformation centers; chapter 6 - energy resources and reserves; chapter 7 - energy and socioeconomics; chapter 8 - state energy data; annex I - installed capacity; annex II - self-generation of electricity; annex III - world energy data; annex IV - world energy evolution; annex V - useful energy balance; annex VI - general structure of the BEN; annex VII - treatment of information; annex VIII - units; annex IX - conversion factors; annex X - consolidated energy balances 1970/2007; annex XI - energy balance 2007. (author)

  15. Measurement of the muon content in air showers at the Pierre Auger Observatory

    Directory of Open Access Journals (Sweden)

    Veberič Darko

    2016-01-01

    Full Text Available The muon content of extensive air showers produced by ultra-high energy cosmic rays is an observable sensitive to the composition of primary particles and to the properties of hadronic interactions governing the evolution of air-shower cascades. We present different methods for estimation of the number of muons at the ground and the muon production depth. These methods use measurements of the longitudinal, lateral, and temporal distribution of particles in air showers recorded by the detectors of the Pierre Auger Observatory. The results, obtained at about 140 TeV center-of-mass energy for proton primaries, are compared to the predictions of LHC-tuned hadronic-interaction models used in simulations with different primary masses. The models exhibit a deficitin the predicted muon content. The combination of these results with other independent mass composition analyses, such as those involving the depth of shower maximum observablemax, provide additional constraints on hadronic-interaction models for energies beyond the reach of the LHC.

  16. Determination of the Glycogen Content in Cyanobacteria.

    Science.gov (United States)

    De Porcellinis, Alice; Frigaard, Niels-Ulrik; Sakuragi, Yumiko

    2017-07-17

    Cyanobacteria accumulate glycogen as a major intracellular carbon and energy storage during photosynthesis. Recent developments in research have highlighted complex mechanisms of glycogen metabolism, including the diel cycle of biosynthesis and catabolism, redox regulation, and the involvement of non-coding RNA. At the same time, efforts are being made to redirect carbon from glycogen to desirable products in genetically engineered cyanobacteria to enhance product yields. Several methods are used to determine the glycogen contents in cyanobacteria, with variable accuracies and technical complexities. Here, we provide a detailed protocol for the reliable determination of the glycogen content in cyanobacteria that can be performed in a standard life science laboratory. The protocol entails the selective precipitation of glycogen from the cell lysate and the enzymatic depolymerization of glycogen to generate glucose monomers, which are detected by a glucose oxidase-peroxidase (GOD-POD) enzyme coupled assay. The method has been applied to Synechocystis sp. PCC 6803 and Synechococcus sp. PCC 7002, two model cyanobacterial species that are widely used in metabolic engineering. Moreover, the method successfully showed differences in the glycogen contents between the wildtype and mutants defective in regulatory elements or glycogen biosynthetic genes.

  17. Annual Energy Review 2011

    Energy Technology Data Exchange (ETDEWEB)

    Fichman, Barbara T. [USDOE Energy Information Administration (EIA), Washington, DC (United States)

    2012-09-01

    The Annual Energy Review (AER) is the U.S. Energy Information Administration's (EIA) primary report of annual historical energy statistics. For many series, data begin with the year 1949. Included are statistics on total energy production, consumption, trade, and energy prices; overviews of petroleum, natural gas, coal, electricity, nuclear energy, and renewable energy; financial and environment indicators; and data unit conversions. Publication of this report is required under Public Law 95–91 (Department of Energy Organization Act), Section 205(c), and is in keeping with responsibilities given to the EIA under Section 205(a)(2), which states: “The Administrator shall be responsible for carrying out a central, comprehensive, and unified energy data and information program which will collect, evaluate, assemble, analyze, and disseminate data and information....” The AER is intended for use by Members of Congress, Federal and State agencies, energy analysts, and the general public. EIA welcomes suggestions from readers regarding the content of the AER and other EIA publications.

  18. Content Maps: A Teaching and Assessment Tool for Content Knowledge

    Science.gov (United States)

    Ward, Phillip; Lehwald, Harry; Lee, Yun Soo

    2015-01-01

    Developing content knowledge in teachers presents a constant challenge for teacher educators. This article introduces a teaching and assessment tool called a "content map," which allows teacher educators, teachers, and coaches to conceptualize the scope, sequence, and relational characteristics of the content being taught. Content maps…

  19. Cultivar and Harvest Month Influence the Nutrient Content of Opuntia spp. Cactus Pear Cladode Mucilage Extracts.

    Science.gov (United States)

    du Toit, Alba; de Wit, Maryna; Hugo, Arno

    2018-04-16

    Mucilage extracted from cactus pear cladodes is a hydrocolloid gum. It is a novel, natural, low-kilojoule, cost-effective texture-modifying ingredient in functional food products. Yet, the cultivar with the most optimal nutrient content and the preferred harvest times are as yet unknown. For this reason, mucilage from three Opuntia ficus-indica (Algerian, Morado and Gymno-Carpo) and one Opuntia robusta (Robusta) cultivar were investigated to determine their nutrient content over six months. Nutrients that contribute energy (10.2 kJ/g) were low. The mineral content was high (ash 17.7/100 g), particularly calcium (3.0 g/100 g) and phosphorous (109.5 mg/kg). Low insoluble acid-detergent fibre (1.4 g/kg) and neutral-detergent fibre (2.1 g/kg) values indicated that mucilage was mostly soluble fibre. Calcium oxalate crystals were not detected in dried mucilage. Opuntia robusta powders had higher protein, extractable fat and potassium content, while Opuntia ficus-indica mucilage powders had higher polyunsaturated (Linoleic and α-Linolenic acid) fat content. O. robusta Robusta mucilage, harvested after the fruit harvest (February) had the lowest energy content and the highest mineral and protein content. Mucilage powders were highly soluble, low-kilojoule and mineral-rich. This is a functional ingredient that is produced from an easily cultivated crop, as cactus pears grow in areas with poor soil, extremely high daytime temperatures and limited water supplies.

  20. The content of phenolics and tannins in native and invasive Solidago species

    Directory of Open Access Journals (Sweden)

    Oksana Omelchuk

    2013-04-01

    Full Text Available This paper deals with plant invasions in the Transcarpathian region of the Ukraine. Within Solidagogenus, one native (S. virgaurea and one invasive (S. canadensis species were studied by measuring contents of phenolics and tannins. The results support the enemy release hypothesis. Because the invasive species can save its energy by aborting the phenolics production, and use this energy for other processes like growth or reproduction.

  1. Bone mineral content of the forearm in healthy Dutch women

    NARCIS (Netherlands)

    Barentsen, R.; Raymakers, J.A.; Landman, J.O.; Duursma, S.A.

    1988-01-01

    Single energy photon absorptiometry is a reliable technique for assessing the bone mineral content (BMC) of cortical bone in the forearm. It can also be used for BMC measurement in the ultradistal part of the forearm, where there is a considerable proportion of trabecular bone. The results of a BMC

  2. An intelligent content discovery technique for health portal content management.

    Science.gov (United States)

    De Silva, Daswin; Burstein, Frada

    2014-04-23

    Continuous content management of health information portals is a feature vital for its sustainability and widespread acceptance. Knowledge and experience of a domain expert is essential for content management in the health domain. The rate of generation of online health resources is exponential and thereby manual examination for relevance to a specific topic and audience is a formidable challenge for domain experts. Intelligent content discovery for effective content management is a less researched topic. An existing expert-endorsed content repository can provide the necessary leverage to automatically identify relevant resources and evaluate qualitative metrics. This paper reports on the design research towards an intelligent technique for automated content discovery and ranking for health information portals. The proposed technique aims to improve efficiency of the current mostly manual process of portal content management by utilising an existing expert-endorsed content repository as a supporting base and a benchmark to evaluate the suitability of new content A model for content management was established based on a field study of potential users. The proposed technique is integral to this content management model and executes in several phases (ie, query construction, content search, text analytics and fuzzy multi-criteria ranking). The construction of multi-dimensional search queries with input from Wordnet, the use of multi-word and single-word terms as representative semantics for text analytics and the use of fuzzy multi-criteria ranking for subjective evaluation of quality metrics are original contributions reported in this paper. The feasibility of the proposed technique was examined with experiments conducted on an actual health information portal, the BCKOnline portal. Both intermediary and final results generated by the technique are presented in the paper and these help to establish benefits of the technique and its contribution towards effective

  3. Tangible and fungible energy: Hybrid energy market and currency system for total energy management. A Masdar City case study

    International Nuclear Information System (INIS)

    Sgouridis, Sgouris; Kennedy, Scott

    2010-01-01

    We propose the introduction of an energy-based parallel currency as a means to ease the transition to energy-conscious living. Abundant fossil energy resources mask the internal and external energy costs for casual energy consumers. This situation is challenging communities that draw a significant fraction of their primary energy consumption from renewable energy sources. The Masdar Energy Credit (MEC) system is a way of translating the fundamental aspects behind energy generation and usage into a tangible reality for all users with built-in fungibility to incentivize collectively sustainable behavior. The energy credit currency (ergo) corresponds with a chosen unit of energy so that the total amount of ergos issued equals the energy supply of the community. Ergos are distributed to users (residents, commercial entities, employees, and visitors) on a subscription basis and can be surrendered in exchange for the energy content of a service. A spot market pricing mechanism is introduced to relate ergos to 'fiat' currency using a continuously variable exchange rate to prevent depletion of the sustainable energy resource. The MEC system is intended to: (i) meet the sustainable energy balance targets of a community (ii) support peak shaving or load shifting goals, and (iii) raise energy awareness.

  4. Energy values of suspended detritus in Andaman Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Krishnakumari, L.; Royan, J.P.; Sumitra-Vijayaraghavan

    Energy content of suspended detritus was determined in Andaman Sea waters during April-May 1988. The caloric content of suspended detritus ranged from 987 to 7040 cal. per gram dry wt with an average value of 5530 cal. per gram dry wt. The results...

  5. Enzymatic pre-treatment of high content cellulosic feedstock improves biogas production

    Science.gov (United States)

    Animal wastes with high lignin and cellulosic contents can serve as the feedstock for biogas production (mainly methane) that could be used as alternative energy source. However, these high lignin and cellulosic feedstocks are quite recalcitrant to be readily utilized by methanogens to produce ben...

  6. Elemental content profiles in propolis from several cities of Turkey

    Directory of Open Access Journals (Sweden)

    Canan Aksoy

    2017-08-01

    Full Text Available Background: Macro-element content profiles in propolis that have been previously used in traditional folk medicine have provided enough information to develop a classification of the geological origin of propolis. Within this study, we aim to contribute our research to existing literatüre, particularly through our use of EDXRF spectroscopy, which has not been used to study propolis before. The results of the study led us to conclude that the residues of heavy metals were a limited concentration in Turkish propolis samples. Objective: The purpose of this study was to investigate the macro-element profiles in Turkish propolis from 18 different cities of Turkey. Methods: The macro-element of 22 raw propolis samples were investigated using Energy-Dispersive X-ray fluorescence spectrometry. Results: Turkish Propolis was discovered to be rich with minerals of potassium, sodium which could be more beneficial in human nutrition. Potassium content was at a relatively higher level than other elements in these samples, while calcium content was at alower level in those samples from various regions of Turkey. Conclusion: The elements of propolis that we studied were distinctive enough to make the discrimination of propolis from different locations in Turkey possible. The quantification by energy-dispersive X-ray fluorescence spectrometry procedures provided good resolution of multi-element analysis in propolis samples.

  7. Nuclear energy from the viewpoint of adolescents. Content analysis of essays of Bavarian high school students

    International Nuclear Information System (INIS)

    Peters, H.P.

    1985-09-01

    It was found that in the discussion about nuclear energy the aspect 'health and safety risks' plays the major role. Nuclear energy in this dimension is judged ambivalent by proponents of nuclear energy and clearly negative by opponents. Surprisingly, proponents and opponents agree on the advantages of nuclear energy in securing long-term energy supply. Even a lot of proponents of nuclear energy were not convinced that a safe disposal of nuclear waste is technically possible. With respect to fossil and renewable energy sources the dimensions 'security of supply' and 'environmental impacts' were the most crucial ones. Both energy sources are judged very negatively in both dimensions. The students who favour the use of nuclear energy were found to rate fossil and renewable energy sources more negatively than those who opposed nuclear energy. (orig./HP) [de

  8. Effect of water content on specific heat capacity of porcine septum cartilage

    Science.gov (United States)

    Chae, Yongseok; Lavernia, Enrique J.; Wong, Brian J.

    2002-06-01

    The effect of water content on specific heat capacity was examined using temperature modulated Differential Scanning Calorimetry (TMDSC). This research was motivated in part by the development laser cartilage reshaping operations, which use photothermal heating to accelerate stress relaxation and shape change. Deposition of thermal energy leads to mechanical stress relaxation and redistribution of cartilage internal stresses, which may lead to a permanent shape change. The specific heat of cartilage specimens (dia: 3 mm and thickness 1-2 mm) was measured using a heating rate of 2 degree(s)C/min for conventional DSC and 2 degree(s)C/min with an amplitude 0.38-0.45 degree(s)C and a period 60-100 sec for TMDSC. The amount of water in cartilaginous tissue was determined using thermogravimetry analysis (TGA) under ambient conditions. In order to correlate changes in heat flow with alterations in cartilage mechanical behavior, dynamic mechanical temperature analysis (DMTA) was used to estimate the specific transition temperatures where stress relaxation occurs. With decreasing water content, we identified a phase transition that shifted to a higher temperature after 35-45% water content was measured. The phase transition energy increased from 0.12 J/g to 1.68 J/g after a 45% weight loss. This study is a preliminary investigation focused on understanding the mechanism of the stress relaxation of cartilage during heating. The energy requirement of such a transition estimated using TMDSC and temperature range, where cartilage shape changes likely occur, was estimated.

  9. Energy in the Kantowski–Sachs space-time using teleparallel ...

    Indian Academy of Sciences (India)

    Energy in the Kantowski–Sachs space-time using teleparallel geometry ... Kantowski–Sachs metric; teleparallelism; gravitational energy. Abstract. The purpose of this paper is to examine the energy content of the inflationary Universe described by Kantowski–Sachs space-time in quasilocal approach of teleparallel gravity ...

  10. Effect of Fe-Content on the Mechanical Properties of Recycled Al Alloys during Hot Compression

    Directory of Open Access Journals (Sweden)

    Hongzhou Lu

    2017-07-01

    Full Text Available It is unavoidable that Fe impurities will be mixed into Al alloys during recycling of automotive aluminum parts, and the Fe content has a significant effect on the mechanical properties of the recycled Al alloys. In this work, hot compression tests of two Fe-containing Al alloys were carried out at elevated temperatures within a wide strain rate range from 0.01 s−1 to 10 s−1. The effect of Fe content on the peak stress of the stress vs. strain curves, strain rate sensitivity and activation energy for dynamic recrystallization are analyzed. Results show that the recycled Al alloy containing 0.5 wt % Fe exhibits higher peak stresses and larger activation energy than the recycled Al alloy containing 0.1 wt % Fe, which results from the fact that there are more dispersed AlMgFeSi and/or AlFeSi precipitates in the recycled Al alloy containing 0.5 wt % Fe as confirmed by SEM observation and energy spectrum analysis. It is also shown that the Fe content has little effect on the strain rate sensitivity of the recycled Al alloys.

  11. Energy utilization of light and heavy weaned piglets subjected to different dietary energy levels

    Directory of Open Access Journals (Sweden)

    Andréa Machado Leal Ribeiro

    Full Text Available ABSTRACT This study was conducted to evaluate the effects of dietary metabolisable energy (ME: 3.25, 3.40, 3.55, or 3.70 Mcal kg−1 and weaning weight (WW: light 4.0±0.7 kg, and heavy: 6.3±0.6 kg on productive response and energy utilization of weaned piglets. Sixty-four male piglets were housed in 32 metabolic cages (two animals per cage during the first 14 d postweaning. At day 15, only one animal per cage was kept until day 28. Body composition, energy, and nutrient deposition rates and energy utilization efficiency were measured through a comparative slaughter procedure. Piglets with light WW had a poorer feed conversion ratio and lower weight gain and feed intake when expressed per live weight. Increased ME led to greater daily fat deposition in the empty bodies (defined as weighted mean of the carcass + organs + blood, no intestinal content, while light WW piglets had a reduced protein deposition. Light WW piglets increased heat production with increased ME, but no effect was seen for the heavy WW piglets. By contrast, heavy WW piglets increased empty body gross energy as ME increased, while no influence was observed on light WW piglets. Increasing dietary energy levels did not contribute to the subsequent growth performance of piglets that were lighter at weaning. The lack of interaction between weaning weight and dietary ME content on growth performance does not support the hypothesis that light piglets at weaning do not exhibit compensatory growth because of limitations in energy intake.

  12. Possible dark energy imprints in the gravitational wave spectrum of mixed neutron-dark-energy stars

    Energy Technology Data Exchange (ETDEWEB)

    Yazadjiev, Stoytcho S. [Department of Theoretical Physics, Faculty of Physics, St. Kliment Ohridski University of Sofia, James Bourchier Blvd. 5, 1164 Sofia (Bulgaria); Doneva, Daniela D., E-mail: yazad@phys.uni-sofia.bg, E-mail: daniela.doneva@uni-tuebingen.de [Theoretical Astrophysics, IAAT, Eberhard-Karls University of Tübingen, Auf der Morgenstelle 10, 72076 Tübingen (Germany)

    2012-03-01

    In the present paper we study the oscillation spectrum of neutron stars containing both ordinary matter and dark energy in different proportions. Within the model we consider, the equilibrium configurations are numerically constructed and the results show that the properties of the mixed neuron-dark-energy star can differ significantly when the amount of dark energy in the stars is varied. The oscillations of the mixed neuron-dark-energy stars are studied in the Cowling approximation. As a result we find that the frequencies of the fundamental mode and the higher overtones are strongly affected by the dark energy content. This can be used in the future to detect the presence of dark energy in the neutron stars and to constrain the dark-energy models.

  13. Energy requirements for racing endurance sled dogs*

    OpenAIRE

    Loftus, John P.; Yazwinski, Molly; Milizio, Justin G.; Wakshlag, Joseph J.

    2014-01-01

    Endurance sled dogs have unique dietary energy requirements. At present, there is disparity in the literature regarding energy expenditure and thus energy requirements of these dogs. We sought to further elucidate energy requirements for endurance sled dogs under field conditions. Three sled dog teams completing the 2011 Yukon Quest volunteered to provide diet history. Nutritional content was evaluated and a mock meal was analysed for each team. Race data were obtained from www.yukonquest.com...

  14. Mineral content in French type bread with sodium replacement using ...

    African Journals Online (AJOL)

    Mineral content in French type bread with sodium replacement using fluorescence spectrometry X-rays by energy dispersive. Thaisa A. Souza Gusmão, Rennan P. De Gusmão, Severina De Sousa, Mário Eduardo R. Moreira Cavalcanti Mata, Maria Elita M Duarte, Rossana Maria F. De Figuereido, Ricardo T Moreira ...

  15. Energy recovery from rivers and oceans

    International Nuclear Information System (INIS)

    2009-01-01

    This book gathers the different projects, systems and technologies allowing to recover the energy from rivers, ocean streams, waves and tides with their economic interest. Content: project of swell and waves energy recovery: Pelamis and Searev projects, buoys and breaking systems; streams and tidal energy: horizontal axis and vertical axis turbines, oscillating column and hydraulic systems; kinematic chains of energy generation systems; terrestrial hydro-energy: small-scale hydro-power, French regulation, opening of energy markets, renewable energy law, the French Pope and Lema laws, exploitation permits, markets and perspectives; small hydro-power technologies: turbines, generator, multiplier; R and D trends: turbines, engines, control systems, combined energies and uses; low-fall technology; duct-embedded systems; other technologies. (J.S.)

  16. Energy efficiency and energy management: an abundance

    International Nuclear Information System (INIS)

    Coullet-Demaiziere, Corinne; Barthet, Marie-Claire; Tourneur, Jean-Claude; Mirguet, Olivier

    2015-01-01

    As France has just published a decree on the energy audit for large companies, and has thus been among the first countries to comply with an article of the European directive on energy efficiency, a set of articles discusses various aspects of these issues of energy efficiency and energy management. A first one presents this mandatory energy audit as a tool for a better energy efficiency, and illustrates the relationship between this commitment and the ISO 50001 standard for French large companies. A second article outlines the tools and standards of application of this energy audit in different legal texts. A third one comments the introduction of four new European arrangements on the labelling of products (indication of energy performance by retailers, objective of reduction of energy consumption, information displayed on site and on-line for various household appliances, current legislation). The next article comments the new German legislation on renewable energies which implements environmental requirements higher than European objectives, and tries to boost the carbon market. The presence of the ISO 50001 certification in the German law is also briefly addressed. Then, an article proposes an overview of a bill project, opinions of experts, and way to go for the new arrangement for energy saving certificates (CEE, certificat d'economie d'energie) launched by the French ministry of Ecology, and which aims at a 700 TWh saving. The content of each article of the bill project is presented and explained, and the relationship between certificate application and some standards is highlighted. The last article comments the decision of the European Court of Justice on the compatibility of Flemish Green Certificates with the European law

  17. Energy recovery from waste food by combustion or gasification with the potential for regenerative dehydration: A case study

    International Nuclear Information System (INIS)

    Caton, P.A.; Carr, M.A.; Kim, S.S.; Beautyman, M.J.

    2010-01-01

    Energy recovery from food waste was studied using the food service at the US Naval Academy as a case study. Post-consumer food waste was captured over a period of ten days to estimate individual waste per meal and total waste per month. The food waste was analyzed for chemical composition and water content using ultimate and proximate analysis, and for energy content, and compared with the same analyses of wood (a more typical biomass fuel). Three different samples of food waste showed relative uniformity of properties despite being sampled on different days, with different menus. Food waste had lower oxygen content, higher nitrogen and ash content, and higher energy content than wood. The food waste in this study had approximately 70% water content. Temperatures and emissions from combustion of wood pellets, dried pelletized food waste, and dried non-pelletized food waste were measured and compared using a modified residential pellet stove. Temperatures were higher for food waste due to the higher energy content. Emissions of NO, HC, and soot were slightly higher for food waste. Despite the large water content, thermodynamic analysis showed that regenerative dehydration, in which waste energy from the combustion system is used to remove water from the incoming wet fuel, is possible. An excess enthalpy ratio is defined to formalize the comparison of waste sensible enthalpy with the energy required for dehydration. Analysis of fuel-lean combustion and fuel-rich gasification shows that little, if any, external energy would necessarily be required to remove the water from the incoming fuel. An equilibrium model was used to simulate waste food gasification by extending the simulation to high water content levels. Probable ranges for successful food waste gasification are identified. Energy recovery of waste food could result in cost savings by offsetting traditional fuel-use (e.g. natural gas for heating) and by reducing disposal costs.

  18. Energy recovery from waste food by combustion or gasification with the potential for regenerative dehydration: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Caton, P.A.; Carr, M.A.; Kim, S.S.; Beautyman, M.J. [US Naval Academy, Department of Mechanical Engineering, 590 Holloway Road, Annapolis, MD 21402 (United States)

    2010-06-15

    Energy recovery from food waste was studied using the food service at the US Naval Academy as a case study. Post-consumer food waste was captured over a period of ten days to estimate individual waste per meal and total waste per month. The food waste was analyzed for chemical composition and water content using ultimate and proximate analysis, and for energy content, and compared with the same analyses of wood (a more typical biomass fuel). Three different samples of food waste showed relative uniformity of properties despite being sampled on different days, with different menus. Food waste had lower oxygen content, higher nitrogen and ash content, and higher energy content than wood. The food waste in this study had approximately 70% water content. Temperatures and emissions from combustion of wood pellets, dried pelletized food waste, and dried non-pelletized food waste were measured and compared using a modified residential pellet stove. Temperatures were higher for food waste due to the higher energy content. Emissions of NO, HC, and soot were slightly higher for food waste. Despite the large water content, thermodynamic analysis showed that regenerative dehydration, in which waste energy from the combustion system is used to remove water from the incoming wet fuel, is possible. An excess enthalpy ratio is defined to formalize the comparison of waste sensible enthalpy with the energy required for dehydration. Analysis of fuel-lean combustion and fuel-rich gasification shows that little, if any, external energy would necessarily be required to remove the water from the incoming fuel. An equilibrium model was used to simulate waste food gasification by extending the simulation to high water content levels. Probable ranges for successful food waste gasification are identified. Energy recovery of waste food could result in cost savings by offsetting traditional fuel-use (e.g. natural gas for heating) and by reducing disposal costs. (author)

  19. Energy deposition in NSRR test fuels

    International Nuclear Information System (INIS)

    Ohnishi, Nobuaki; Tanzawa, Sadamitsu; Tanzawa, Tomio; Kitano, Teruaki; Okazaki, Shuji

    1978-02-01

    Interpretation of fuel performance data collected during inpile testing in the NSRR requires a knowledge of the energy deposition or enthalpy increase in each sample tested. The report describes the results of absolute measurement of fission products and contents of uranium in irradiated test fuels which were performed to determine the energy deposition. (auth.)

  20. A study of real-time content marketing : formulating real-time content marketing based on content, search and social media

    OpenAIRE

    Nguyen, Thi Kim Duyen

    2015-01-01

    The primary objective of this research is to understand profoundly the new concept of content marketing – real-time content marketing on the aspect of the digital marketing experts. Particularly, the research will focus on the real-time content marketing theories and how to build real-time content marketing strategy based on content, search and social media. It also finds out how marketers measure and keep track of conversion rates of their real-time content marketing plan. Practically, th...

  1. Is nuclear energy justifiable?

    International Nuclear Information System (INIS)

    Roth, E.

    1988-01-01

    This is a comment on an article by Prof. Haerle a theologist, published earlier under the same heading, in which the use of nuclear energy is rejected for ethical reasons. The comment contents the claim mode by the first author that theologists, because they have general ethical competency, must needs have competency to decide on the fittest technique (of energy conversion) for satisfying, or potentially satisfying, the criteria of responsible action. Thus, an ethical comment on, for instance, nuclear energy is beyond the scope of the competency of the churches. One is only entitled as a private person to objecting to nuclear energy, not because of one's position in the church. (HSCH) [de

  2. Needs of Non Energy-Focused Contractors

    Energy Technology Data Exchange (ETDEWEB)

    Liaukus, C.

    2012-12-01

    To better understand the informational needs of non energy-focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

  3. Needs of Non-Energy Focused Contractors

    Energy Technology Data Exchange (ETDEWEB)

    Liakus, C. [Building Media and the Building America Retrofit Alliance (BARA), Wilmington, DE (United States)

    2012-12-01

    To better understand the informational needs of non-energy focused contractors, including what information they need to motivate them to become energy-focused, the BARA team studied the type of information provided by the national programs, trade associations, and manufacturers that were researched for the related technical report: Effective Communication of Energy Efficiency. While that report focused on the delivery method, format, and strategy of the information, this study examines the content being put forward.

  4. Switchgrass harvest time management can impact biomass yield and nutrient content

    Science.gov (United States)

    Switchgrass (Panicum virgatum L.) is a dedicated energy crop native to much of North America. While high-biomass yield is of significant importance for the development of switchgrass as a bioenergy crop, nutrient content in the biomass as it relates to biofuel conversion efficiency is also critical...

  5. Infrared stabilization of rice bran and its effects on γ-oryzanol content, tocopherols and fatty acid composition.

    Science.gov (United States)

    Yılmaz, Neşe; Tuncel, Necati Barış; Kocabıyık, Habib

    2014-06-01

    Rice bran is a nutritionally valuable by-product of paddy milling. In this study an experimental infrared (IR) stabilization system was developed to prevent rice bran rancidity. The free fatty acid content of raw and IR-stabilized rice bran samples was monitored every 15 days during 6 months of storage. In addition, energy consumption was determined. The free fatty acid content of rice bran stabilized at 600 W IR power for 5 min remained below 5% for 165 days. No significant change in γ-oryzanol content or fatty acid composition but a significant decrease in tocopherol content was observed in stabilized rice bran compared with raw bran. IR stabilization was found to be comparable to extrusion with regard to energy consumption. IR stabilization was effective in preventing hydrolytic rancidity of rice bran. By optimizing the operational parameters of IR stabilization, this by-product has the potential for use in the food industry in various ways as a value-added commodity. © 2013 Society of Chemical Industry.

  6. Annual Energy Review 2009

    Energy Technology Data Exchange (ETDEWEB)

    Fichman, Barbara T. [USDOE Energy Information Administration (EIA), Washington, DC (United States)

    2010-08-01

    The Annual Energy Review (AER) is the U.S. Energy Information Administration's (EIA) primary report of annual historical energy statistics. For many series, data begin with the year 1949. Included are statistics on total energy production, consumption, trade, and energy prices; overviews of petroleum, natural gas, coal, electricity, nuclear energy, renewable energy, and international energy; financial and environment indicators; and data unit conversions. Publication of this report is required under Public Law 95–91 (Department of Energy Organization Act), Section 205(c), and is in keeping with responsibilities given to the EIA under Section 205(a)(2), which states: “The Administrator shall be responsible for carrying out a central, comprehensive, and unified energy data and information program which will collect, evaluate, assemble, analyze, and disseminate data and information....” The AER is intended for use by Members of Congress, Federal and State agencies, energy analysts, and the general public. EIA welcomes suggestions from readers regarding the content of the AER and other EIA publications.

  7. Prospects and applicability of wave energy for South Africa

    Science.gov (United States)

    Lavidas, George; Venugopal, Vengatesan

    2018-03-01

    Renewable energy offers significant opportunities for electricity diversification. South Africa belongs to the group of developing nations and encompasses a lot of potential for renewable energy developments. Currently, the majority of its electricity production originates from fossil fuels; however, incorporation of clean coal technologies will aid in reaching the assigned targets. This study offers a long-term wave power quantification analysis with a numerical wave model. The investigation includes long-term resource assessment in the region, variability, seasonal and monthly wave energy content. Locations with high-energy content but low variability pose an opportunity that can contribute in the alleviation of energy poverty. Application of wave converters depends on the combination of complex terms. The study presents resource levels and the joint distributions, which indicate suitability for converter selection. Depending on the region of interest, these characteristics change. Thus, this resource assessment adds knowledge on wave power and optimal consideration for wave energy applicability.

  8. Monte-Carlo calculation of irradiation dose content beyond shielding of high-energy accelerators

    International Nuclear Information System (INIS)

    Mokhov, N.V.; Frolov, V.V.

    1975-01-01

    The MARS programme, designed for calculating the three-dimensional internuclear cascade in defence of the accelerators by the Monte Carlo method, is described. The methods used to reduce the dispersion and the system of semi-empirical formulas made it possible to exceed the parameters of the existing programmes. By means of a synthesis of the results, registered by MARS and HAMLET programmes, the dosage fields for homogeneous and heterogeneous defence were evaluated. The results of the calculated absorbed and equivalent dose behind the barrier, irradiated by a proton beam, having the energy of Esub(o)=1/1000 GeV are exposed. The dependence of the high- and low-energy neutron, proton, pion, kaon, muonium and γ-quantum dosage on the initial energy and thickness, on the material and the composition of the defence is investigated

  9. Cultivar and Harvest Month Influence the Nutrient Content of Opuntia spp. Cactus Pear Cladode Mucilage Extracts

    Directory of Open Access Journals (Sweden)

    Alba du Toit

    2018-04-01

    Full Text Available Mucilage extracted from cactus pear cladodes is a hydrocolloid gum. It is a novel, natural, low-kilojoule, cost-effective texture-modifying ingredient in functional food products. Yet, the cultivar with the most optimal nutrient content and the preferred harvest times are as yet unknown. For this reason, mucilage from three Opuntia ficus-indica (Algerian, Morado and Gymno-Carpo and one Opuntia robusta (Robusta cultivar were investigated to determine their nutrient content over six months. Nutrients that contribute energy (10.2 kJ/g were low. The mineral content was high (ash 17.7/100 g, particularly calcium (3.0 g/100 g and phosphorous (109.5 mg/kg. Low insoluble acid-detergent fibre (1.4 g/kg and neutral-detergent fibre (2.1 g/kg values indicated that mucilage was mostly soluble fibre. Calcium oxalate crystals were not detected in dried mucilage. Opuntia robusta powders had higher protein, extractable fat and potassium content, while Opuntia ficus-indica mucilage powders had higher polyunsaturated (Linoleic and α-Linolenic acid fat content. O. robusta Robusta mucilage, harvested after the fruit harvest (February had the lowest energy content and the highest mineral and protein content. Mucilage powders were highly soluble, low-kilojoule and mineral-rich. This is a functional ingredient that is produced from an easily cultivated crop, as cactus pears grow in areas with poor soil, extremely high daytime temperatures and limited water supplies.

  10. Thermal Transmittance and the Embodied Energy of Timber Frame Lightweight Walls Insulated with Straw and Reed

    Science.gov (United States)

    Miljan, M.; Miljan, J.

    2015-11-01

    Sustainable energy use has become topical in the whole world. Energy gives us comfort we are used to. EU and national regulations determine energy efficiency of the buildings. This is one side of the problem - energy efficiency of houses during exploitation. But the other side is primary energy content of used materials and more rational use of resources during the whole life cycle of a building. The latter value constitutes about 8 - 20% from the whole energy content. Calculations of energy efficiency of materials lead us to energy efficiency of insulation materials and to comparison of natural and industrial materials taking into account their thermal conductivity as well as their primary energy content. Case study of the test house (built in 2012) insulated with straw bales gave the result that thermal transmittance of investigated straw bale walls was according to the minimum energy efficiency requirements set in Estonia U = 0.12 - 0.22 W/m2K (for walls).

  11. 78 FR 77019 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-20

    ... air conditioning heat pump'' that were established in section 5 of the American Energy Manufacturing... heat pump'' product class, including the definition and standards. DATES: DOE will accept comments....gov . Table of Contents I. Background and Authority II. Discussion III. Procedural Requirements A...

  12. Naturalising Representational Content

    Science.gov (United States)

    Shea, Nicholas

    2014-01-01

    This paper sets out a view about the explanatory role of representational content and advocates one approach to naturalising content – to giving a naturalistic account of what makes an entity a representation and in virtue of what it has the content it does. It argues for pluralism about the metaphysics of content and suggests that a good strategy is to ask the content question with respect to a variety of predictively successful information processing models in experimental psychology and cognitive neuroscience; and hence that data from psychology and cognitive neuroscience should play a greater role in theorising about the nature of content. Finally, the contours of the view are illustrated by drawing out and defending a surprising consequence: that individuation of vehicles of content is partly externalist. PMID:24563661

  13. Recovering energy and materials from hazardous waste

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2003-12-01

    The tannery industry faces growing environmental concerns because of the high hazardous metal content of its process waste. The formation, during the tanning process, of the highly toxic hexavalent chromium precludes the use of conventional thermal incineration processes. Borge Tannery in Norway, which processes 600 cattle hides per day, has solved the problem by using new PyroArc technology. The PyroArc waste processing plant can treat all of the tannery's production wastes, transforming them into useful products such as fuel gas and re-usable metal. The fuel gas consists mainly of carbon monoxide, hydrogen and nitrogen, and has a calorific value of about 4 MJ/Nm{sub 3}. About 65-70% of the energy content of the source material (waste or biomass) is recovered in the gas, and this is used to produce steam and/or electricity in a gas engine with a capacity of 580 kW. A further 20-25% of the initial energy content is recovered as heat or low-pressure steam. The plant is designed to be self-sufficient in energy (1.5 MW) and to meet the tannery's maximum requirements for hot water and steam. (UK)

  14. Randomized trial of weight-loss-diets for young adults varying in fish and fish oil content

    NARCIS (Netherlands)

    Thorsdottir, I.; Tomasson, H.; Gunnarsdottir, I.; Gisladottir, E.; Kiely, M.; Parra, M.D.; Bandarra, N.M.; Schaafsma, G.; Martinez, J.A.

    2007-01-01

    Objective: To investigate the effect of including seafood and fish oils, as part of an energy-restricted diet, on weight loss in young overweight adults. Design: Randomized controlled trial of energy-restricted diet varying in fish and fish oil content was followed for 8 weeks. Subjects were

  15. Effects of dietary fermentable carbohydrates on energy metabolism in group-housed sows.

    Science.gov (United States)

    Rijnen, M M; Verstegen, M W; Heetkamp, M J; Haaksma, J; Schrama, J W

    2001-01-01

    The effect of dietary nonstarch polysaccharide (NSP) content on the metabolic rate in group-housed sows was studied. Twelve groups of six nonpregnant sows were each fed one of four experimental diets similar in composition except for the starch and NSP content. Exchanging sugar beet pulp silage (SBPS) for tapioca created the difference in starch and NSP ratio in the diet. On a DM basis, diets contained 0, 10, 20, or 30% SBPS. Sows were group-housed and fed at 1.30 times the assumed maintenance energy requirements. Nitrogen and energy balances were measured per group during a 7-d experimental period, which was preceded by a 33-d adaptation period. Both digestibility and metabolizability of energy decreased with increasing dietary SBPS content (P 0.1). Based on energy retention data and apparent fecal digestibilities of crude protein, crude fat, starch, and NSP, the estimated net energy value of fermented NSP was 13.4 kJ/g. The present study shows that group-housed sows are capable of using energy from fermented NSP (i.e., NSP from SBPS) as efficiently as energy from digested starch (i.e., starch from tapioca).

  16. A potential diagnostic for low energy, nonthermal protons in solar flares

    International Nuclear Information System (INIS)

    MacKinnon, A.L.

    1989-01-01

    The current uncertainty in flare research regarding the role of low energy (<1 MeV) protons demands that we consider any possibilities for directly constraining their number and energy content. Here we point out that γ-ray lines, from radiative capture reactions of such protons, may in principle provide such constraints. Making allowance for the possibility that the protons slow down in a warm target, we show how observational upper limits to their strengths may be used to constrain the proton energy content and the temperature of the interaction region

  17. Energy R and D. Geothermal energy and underground reservoirs; R et D energie. Geothermie et reservoirs souterrains

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Geothermal energy appears as a viable economic alternative among the different renewable energy sources. The French bureau of geological and mining researches (BRGM) is involved in several research and development programs in the domain of geothermal energy and underground reservoirs. This document presents the content of 5 programs: the deep hot dry rock system of Soultz-sous-Forets (construction and testing of the scientific pilot, modeling of the reservoir structure), the development of low and high enthalpy geothermal energy in the French West Indies, the comparison of the geothermal development success of Bouillante (Guadeloupe, French West Indies) with the check of the geothermal development of Nyssiros (Greece) and Pantelleria (Italy), the development of the high enthalpy geothermal potentialities of Reunion Island, and the underground storage of CO{sub 2} emissions in geologic formations (deep aquifers, geothermal reservoirs, abandoned mines or oil reservoirs). (J.S.)

  18. Impaired brain energy gain upon a glucose load in obesity.

    Science.gov (United States)

    Wardzinski, Ewelina K; Kistenmacher, Alina; Melchert, Uwe H; Jauch-Chara, Kamila; Oltmanns, Kerstin M

    2018-03-06

    There is evidence that the brain's energy status is lowered in obesity despite of chronic hypercaloric nutrition. The underlying mechanisms are unknown. We hypothesized that the brain of obese people does not appropriately generate energy in response to a hypercaloric supply. Glucose was intravenously infused in 17 normal weights and 13 obese participants until blood glucose concentrations reached the postprandial levels of 7 mmol/L and 10 mmol/L. Changes in cerebral adenosine triphosphate (ATP) and phosphocreatine (PCr) content were measured by 31 phosphorus magnetic resonance spectroscopy and stress hormonal measures regulating glucose homeostasis were monitored. Because vitamin C is crucial for a proper neuronal energy synthesis we determined circulating concentrations during the experimental testing. Cerebral high-energy phosphates were increased at blood glucose levels of 7 mmol/L in normal weights, which was completely missing in the obese. Brain energy content moderately raised only at blood glucose levels of 10 mmol/L in obese participants. Vitamin C concentrations generally correlated with the brain energy content at blood glucose concentrations of 7 mmol/L. Our data demonstrate an inefficient cerebral energy gain upon a glucose load in obese men, which may result from a dysfunctional glucose transport across the blood-brain barrier or a downregulated energy synthesis in mitochondrial oxidation processes. Our finding offers an explanation for the chronic neuroenergetic deficiency and respectively missing satiety perception in obesity. Copyright © 2018. Published by Elsevier Inc.

  19. Monosodium glutamate delivered in a protein-rich soup improves subsequent energy compensation

    OpenAIRE

    Masic, Una; Yeomans, Martin R.

    2014-01-01

    Previous research suggests that monosodium glutamate (MSG) may have a biphasic effect on appetite, increasing appetite within a meal with its flavour-enhancing effect, but enhancing subsequent satiety due to its proposed role as a predictor of protein content. The present study explored this by assessing the impact of a 450 g soup preload differing in MSG concentration (1 % MSG added (MSG+) or no MSG (MSG-)) and nutrient content (low-energy control or high-energy carbohydrate or high-energy p...

  20. The importance of ingestion rates for estimating food quality and energy intake.

    Science.gov (United States)

    Schülke, Oliver; Chalise, Mukesh K; Koenig, Andreas

    2006-10-01

    Testing ecological or socioecological models in primatology often requires estimates of individual energy intake. It is a well established fact that the nutrient content (and hence the energy content) of primate food items is highly variable. The second variable in determining primate energy intake, i.e., the ingestion rate, has often been ignored, and few studies have attempted to estimate the relative importance of the two predictors. In the present study individual ingestion rates were measured in two ecologically very different populations of Hanuman langurs (Semnopithecus entellus) at Jodhpur, India, and Ramnagar, Nepal. Protein and soluble sugar concentrations in 50 and 100 food items. respectively, were measured using standardized methods. Variation in ingestion rates (gram of dry matter per minute) was markedly greater among food items than among langur individuals in both populations, but did not differ systematically among food item categories defined according to plant part and age. General linear models (GLMs) with ingestion rate, protein, and soluble sugar content explained 40-80% of the variation in energy intake rates (kJ/min). The relative importance of ingestion rates was either similar (Ramnagar) or much greater (Jodhpur) than the role of sugar and/or protein content in determining the energy intake rates of different items. These results may impact socioecological studies of variation in individual energy budgets, investigations of food choice in relation to chemical composition or sensory characteristics, and research into habitat preferences that measures habitat quality in terms of abundance of important food sources. We suggest a definition of food quality that includes not only the amount of valuable food contents (energy, vitamins, and minerals) and the digestibility of different foods, but also the rate at which the food can be harvested and processed. Such an extended definition seems necessary because time may constrain primates when

  1. Digital Content Strategies

    OpenAIRE

    Halbheer, Daniel; Stahl, Florian; Koenigsberg, Oded; Lehmann, Donald R

    2013-01-01

    This paper studies content strategies for online publishers of digital information goods. It examines sampling strategies and compares their performance to paid content and free content strategies. A sampling strategy, where some of the content is offered for free and consumers are charged for access to the rest, is known as a "metered model" in the newspaper industry. We analyze optimal decisions concerning the size of the sample and the price of the paid content when sampling serves the dua...

  2. The role of content marketing in social media content communities

    OpenAIRE

    Charmaine du Plessis

    2017-01-01

    Background: Content marketing has become a leading marketing technique in digital marketing communication and uses the point of view of consumers to build relationships by creating and sharing engaging content in social media that enhance their daily lives. Existing research on social media communities has focused mainly on social media marketing and virtual brand community perspectives while content marketing’s valuable and unobtrusive role in social media content communities has largely bee...

  3. Energy load in low energy residences. An analysis of the total energy use in 5 versions of a Norwegian residence; Energibelastninger ved lavenergiboliger. En analyse av totalenergiforbruket i 5 versjoner av en norsk bolig

    Energy Technology Data Exchange (ETDEWEB)

    Winther, Beate Nemeth

    1997-12-31

    The purpose of the study has been to investigate whether Norwegian low energy residences have a lower energy consumption throughout their existence than residences built according to the present practises. The building life span includes in this context production of the necessary building materials, construction and use of the house and demolition and handling of the demolition materials after the house lifetime is over. 5 versions of the building are analysed: 1) A residence built after the building practise according to the 1987 building regulations. 2) A residence built according to the expected practise using the 1997 regulations. 3) A low energy residence which satisfies the demands of U-Values in the 1997 technical regulations but with solar energy equipment and efficient heat recirculation of the exhaust air. 4) A well insulated, low energy residence aided by advanced solar and low energy systems that has a very low energy consumption when in operation. 5) A residence with alternative materials compared to what is normally used in Norwegian residences. The buildings are row houses built at Hamar. All the materials used are mapped. How a large part of the materials is used as well as what materials dominate the various building parts are investigated. The energy content values in most of the building materials have been determined. The yearly energy consumption for operating all the building versions is calculated and the energy for operating is 5 times higher in residences with the largest energy consumption than in residences with the lowest consumption. The energy reduction for all the technical installations used in the row house in the study is determined. The energy consumption for demolition after the life span and transporting the demolition waste is also considered. Finally an analysis is carried out for investigating how uncertainties in the various phases of the life span of the building versions may influence the obtained results. Both an

  4. 76 FR 57515 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2011-09-15

    ... Contents I. Summary of the Final Rule and Its Benefits II. Introduction A. Authority B. Background 1... Wine Coolers From This Rulemaking 2. Product Classes a. General Discussion Regarding Added Product... Cost per Unit 4. Site-to-Source Energy Conversion 5. Discount Rates 6. Benefits From Effects of...

  5. Metabolic profile in growing buffalo heifers fed diet with different energy content

    Directory of Open Access Journals (Sweden)

    B. Gasparrini

    2010-02-01

    Full Text Available Aim of this study was to verify the relation among the mediators and indicators of nutritional status like insulin, glucagon, urea, cholesterol, triglycerides and total proteins in growing buffalo heifers, fed diets with different energy density. 12 Murrah heifers were randomly allocated into two dietary treatments (High, Group H; Low, Group L that differed in energetic levels (Group H: 5.8 UFL/d; Group L: 3.6 UFL/d. Every 30 days, for a total of five times, blood samples were collected at 08.00 h, before feeding, from the jugular vein in vacutainer tubes and analysed to determine metabolic profile. Data on haematic constants were analysed by ANOVA for repeated measures with treatment as the main factor. Low energy availability and low NSC reduced the glucose and insulin and increased glucagone and urea blood levels. The increase of NSC in the diet of group H during the experiment may caused a reduction of the fibre digestibility after the period of adaptation of the rumen microflora and, as a paradox effect, suffered for an energetic lack with a subsequent activation of lipolysis and mobilization of their body reserves. Liver and muscular synthesis increase in group with a high energy availability.

  6. Pulsed electric field treatment enhanced stilbene content in Graciano, Tempranillo and Grenache grape varieties.

    Science.gov (United States)

    López-Alfaro, Isabel; González-Arenzana, Lucía; López, Noelia; Santamaría, Pilar; López, Rosa; Garde-Cerdán, Teresa

    2013-12-15

    The purpose of this paper was to study the effect of pulsed electric fields (PEF) on the stilbene content of three grape varieties. For this purpose, four different PEF treatments were applied using a continuous system over three varieties, Graciano, Tempranillo and Grenache, destemmed and crushed. In addition, the influence of PEF on their physicochemical composition was studied. PEF treatments did not affect the pH or total acidity of Graciano, however, musts from Tempranillo and Grenache had higher pH values and lower total acidity. In the three varieties, all treatments resulted in an increase of potassium content, deeper colour intensity and total polyphenol index and lower tonality, more pronounced in the treatments with higher time and energy. The stilbene content of the must significantly increased with respect to the control. This increase depended on the variety and the treatment applied. Tempranillo increased up 200% the total stilbene concentration, Grenache 60% and Graciano 50%. For the three varieties, the treatment with the highest time and energy was the most effective on the total stilbene extraction. These results indicate that PEF could be a suitable technology for obtaining musts with deeper colour and higher phenolic content, including resveratrol and piceid. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Energy: Transitions and Reshaping

    International Nuclear Information System (INIS)

    Hache, Emmanuel; Mazzucchi, Nicolas; Alex, Bastien; Tchung-Ming, Stephane; Meritet, Sophie; Mignon, Valerie; Fischer-Herzog, Claude; Baccarini, Luca; Karbuz, Sohbet; Carcanague, Samuel; Noreng, Oesteyn; Luciani, Giacomo; Criqui, Patrick

    2016-01-01

    This issue of 'Revue internationale et strategique' from Winter 2016 presents a special dossier about the geopolitics of energy in a transitional and reshaping market. Content: Introduction: A New Age for Energy Markets? (Emmanuel Hache); National vs International Oil Companies: Toward a New Balance (Nicolas Mazzucchi); Can OPEC Survive Oil Abundance? (Emmanuel Hache); Dutch Disease and Low Oil Prices: From Economic Bankruptcy to (geo)political Reshaping (Bastien Alex, Stephane Tchung-Ming); Is Energy a Driving Force in American Foreign Policy? (Sophie Meritet); Oil Prices and U.S. Dollar: Two Sides of the Same Power? (Valerie Mignon ); The EU's Energy Union: What Energy Security for Europe? (Claude Fischer-Herzog); Natural Gas Discoveries and the Future of the Eastern Mediterranean Region (Luca Baccarini, Sohbet Karbuz); The Two Years that Changed the Caspian Sea region (Samuel Carcanague); On Oil and Islam (Oeystein Noreng); Middle East: clean energy sources and the diversification of the oil economies? (Giacomo Luciani); After the Paris Agreement, the New Geopolitics of Energy Innovations (Patrick Criqui)

  8. Soybean Opportunity as Source of New Energy in Indonesia

    Directory of Open Access Journals (Sweden)

    M. Muchlish Adie

    2014-02-01

    Full Text Available These last few years, the name of soybeans soared as a source of biodiesel. Soy biodiesel is an alternative fuel produced from soybean oil. Soybean potential as an alternative renewable energy source because it is expected to have the highest energy content compared to other alternative fuels. Opportunities to develop biodiesel using soybean oil in Indonesia is quite large, considering the soybean is a commodity that is already known and widely cultivated almost in all over Indonesia. In addition, the use of soybean for biofuel feedstock is expected to motivate farmers to cultivate soybeans, so their use is not limited to non-energy raw materials. Soybean varieties that have a high oil content as well as high yield is a source of major biodiesel feedstock. From 73 soybean varieties that have been released in Indonesia, has an average oil content of 18%. Varieties with high oil content can be used as raw material for biodiesel. Research on the use of soy as an ingredient of energy crops (biodiesel have been carried out. In fact, soybean oil is the vegetable oil feedstock for most of the biodiesel being produced in the United States today. With the potential for soybean crops in Indonesia, both in terms of availability of land and varieties, the use of soybean oil for biofuel development in Indonesia is the flagship prospective materials for bio fuel substitute than other plants in the future.

  9. Membrane heat exchanger in HVAC energy recovery systems, systems energy analysis

    Energy Technology Data Exchange (ETDEWEB)

    Nasif, M. [School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, NSW 2052 (Australia); Opus International Consultants (New Zealand); AL-Waked, R. [Mechanical Engineering Department, Prince Mohammad Bin Fahd University (PMU), P.O. Box 1614, AlKhobar 31952 (Saudi Arabia); Morrison, G. [School of Mechanical and Manufacturing Engineering, The University of New South Wales, Sydney, NSW 2052 (Australia); Behnia, M. [School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney, NSW 2006 (Australia)

    2010-10-15

    The thermal performance of an enthalpy/membrane heat exchanger is experimentally investigated. The heat exchanger utilizes a 60gsm Kraft paper as the heat and moisture transfer surface for HVAC energy recovery. The heat exchanger sensible, latent and total effectiveness have been determined through temperature and moisture content measurements. The annual energy consumption of an air conditioner coupled with an enthalpy/membrane heat exchanger is also studied and compared with a conventional air conditioning cycle using in-house modified HPRate software. The heat exchanger effectiveness are used as thermal performance indicators and incorporated in the modified software. Energy analysis showed that an air conditioning system coupled with a membrane heat exchanger consumes less energy than a conventional air conditioning system in hot and humid climates where the latent load is high. It has been shown that in humid climate a saving of up to 8% in annual energy consumption can be achieved when membrane heat exchanger is used instead of a conventional HVAC system. (author)

  10. Renewable energies in the French energy mix. Between national will and regional governance

    International Nuclear Information System (INIS)

    Lechevin, Bruno; Royal, Segolene; Michel, Laurent; Boissier, Fabrice; Lenoir, Jean-Claude; Battistel, Marie-Noelle; Baupin, Denis; Kocher, Isabelle; Salome, Jean-Philippe; Bal, Jean-Louis; Houssin, Didier; Lurel, Victorin; Porquier, Christophe; Schwarz, Virginie; Legrand, Emmanuel; Bozec, Jacques; Jedliczka, Marc; Sudret, Thierry; Colombier, Michel; Lettry, Marion; Lioret, Sonia; Galiano, Mila; Carrega, Marie; Nocodie, Serge; Durand, Yvonnick; Joffre, Andre; Audras, Georges; Franclieu, Robert De; Le Lidec, Frederic; Martin, Geraldine; Gossement, Arnaud; Siess, Damien; Mignon, Herve; Alario, Juan; Lepercq, Thierry; Bozec, Jacques; De Beaufort, Rodolphe; Rumolino, Claudio; Mauduit, Stephane; Maocec, Christophe; Sauron, Claire; Raymond, Thierry; Boissavy, Christian; Laplaige, Philippe; Graff, Jean-Jacques; Schmittbuhl, Jean; Bon, Andre; Bejgane, Marwane; Brogle, Sylvain; Soule, Jean-Philippe; De Roeck, Yann-Herve; Delanoe, Julien; Crest, Jerome; Teillac-Deschamps, Pauline; Durand, Yvonnick; Augras, Georges; Degos, Olivier; De Charentenay, Jean-Noel; Francke, Loic; Collin, Gaetan; Beccavin, Jerome; Defrenne, Nicolas

    2015-04-01

    This large report contains contributions and contents of round tables and workshops held during a colloquium. Round tables addressed the following topics: challenges and perspectives for the law on energy transition and the electric mix, maturity and competitiveness of existing sectors, instruction manual for a decentralised electric mix, electric mix and grid adaptation. Workshop addressed wind energy (development status, key figures, participation-based wind energy, radar disturbances as a brake to wind energy development), photovoltaic workshop (development status and key figures, ADEME actions, project elaboration, governance, financing and self-consumption, R and D and industrial innovation, environmental impacts and recycling), geothermal energy (development status and key figures, Enhanced Geothermal System in Alsace, governance mode for projects in the French West Indies), and sea energies (development status and key figures, the PRISMER project, demonstrators, industrial fallouts of renewable sea energies, environmental impacts and acceptability). The second part of the reports contains all Power Point presentations

  11. Energy visions 2050

    Energy Technology Data Exchange (ETDEWEB)

    2009-07-01

    Energy Visions 2050 considers measures for addressing the enormous future challenges facing the energy sector, focusing on technological and techno-economic perspectives. The analysis of the development of technologies covers the whole energy chain, highlighting the necessity of efficient energy use in all activities of societies. The contents include a discussion on potential future low-emission and renewable energy conversion technologies, as well as new technology solutions in the industrial, building and transport sectors and in energy supply systems. The move towards zero-emission energy systems has consequenses for energy supply, and makes the analysis of energy resources presented in the book all the more valuable. Scenarios of alternative development paths to 2050 at the global, European and Finnish levels are presented, assuming different technological development options, economic growth rates, degrees of globalisation and information flows. The results show interesting differences between the scenarios with regard to energy production and use, mitigation of greenhouse gas emissions, and global warming. Energy Visions 2050 in mainly intended for those who have a fairly good knowledge of the energy sector and energy technologies, e.g. energy policymakers, experts responsible for energy-related issues in industry, and investors in energy technologies. The topics are approached from a global perspective. In some technological details, however, Finnish technology and Finland's technological achievements are highlighted. The topics and viewpoints of the book will certainly be of interest to international readers as well

  12. CZTS stoichiometry effects on the band gap energy

    International Nuclear Information System (INIS)

    Malerba, Claudia; Biccari, Francesco; Azanza Ricardo, Cristy Leonor; Valentini, Matteo; Chierchia, Rosa; Müller, Melanie; Santoni, Antonino; Esposito, Emilia; Mangiapane, Pietro; Scardi, Paolo; Mittiga, Alberto

    2014-01-01

    Highlights: • CZTS films with different compositions were grown from stacked-layer precursors. • The band-gap energy varies from 1.48 to 1.63 eV as the [Sn]/[Cu] ratio increases. • The Zn content seems not to be a critical parameter for the optical properties. • PDS data show an increase of the sub-gap absorption as the Sn content is reduced. • Formation of defects at low Sn content was proposed to explain the Eg variation. -- Abstract: The considerable spread of Cu 2 ZnSnS 4 (CZTS) optical properties reported in the literature is discussed in terms of material stoichiometry. To this purpose, kesterite thin films were prepared by sulfurization of multilayered precursors of ZnS, Cu and Sn, changing the relative amounts to obtain CZTS layers with different compositions. X-Ray Diffraction (XRD), Energy Dispersive X-Ray (EDX) spectroscopy, X-Ray Photoelectron Spectroscopy (XPS) and Raman spectroscopy were used for structural and compositional analysis. XRD quantitative phase analysis provides the amount of spurious phases and information on Sn-site occupancy. The optical properties were investigated by spectrophotometric and Photothermal Deflection Spectroscopy (PDS) measurements to assess the absorption coefficient of samples with different compositions. The PDS data show an increase of the sub-band absorption as the Sn content decreases. The results are interpreted assuming the formation of additional defects as the tin content is reduced. Those defects can also be responsible for the decrease of the band gap energy value as the Sn/Cu ratio is decreased

  13. Carbon fiber content measurement in composite

    Science.gov (United States)

    Wang, Qiushi

    Carbon fiber reinforced polymers (CFRPs) have been widely used in various structural applications in industries such as aerospace and automotive because of their high specific stiffness and specific strength. Their mechanical properties are strongly influenced by the carbon fiber content in the composites. Measurement of the carbon fiber content in CFRPs is essential for product quality control and process optimization. In this work, a novel carbonization-in-nitrogen method (CIN) is developed to characterize the fiber content in carbon fiber reinforced thermoset and thermoplastic composites. In this method, a carbon fiber composite sample is carbonized in a nitrogen environment at elevated temperatures, alongside a neat resin sample. The carbon fibers are protected from oxidization while the resin (the neat resin and the resin matrix in the composite sample) is carbonized under the nitrogen environment. The residue of the carbonized neat resin sample is used to calibrate the resin carbonization rate and calculate the amount of the resin matrix in the composite sample. The new method has been validated on several thermoset and thermoplastic resin systems and found to yield an accurate measurement of fiber content in carbon fiber polymer composites. In order to further understand the thermal degradation behavior of the high temperature thermoplastic polymer during the carbonization process, the mechanism and the kinetic model of thermal degradation behavior of carbon fiber reinforced poly (phenylene sulfide) (CPPS) are studied using thermogravimetry analysis (TGA). The CPPS is subjected to TGA in an air and nitrogen atmosphere at heating rates from 5 to 40°C min--1. The TGA curves obtained in air are different from those in nitrogen. This demonstrates that weight loss occurs in a single stage in nitrogen but in two stages in air. To elucidate this difference, thermal decomposition kinetics is analyzed by applying the Kissinger, Flynn-Wall-Ozawa, Coat-Redfern and

  14. Energy Foundation Schleswig-Holstein. Annual report 2000; Energiestiftung Schleswig-Holstein. Jahresbericht 2000

    Energy Technology Data Exchange (ETDEWEB)

    Herbert, W.; Blechschmidt, K. (comps.)

    2001-07-01

    Content: Changing challenges for suppliers and customers; energy labels; investment for the future: heating by wood, power from sun, low energy consuming buildings; developments on energy efficiency and experts; who's who: colleagues and cooperators of the energy foundation.(GL)

  15. Energy supply and demand in Canada and export demand for Canadian energy, 1966--1990

    Energy Technology Data Exchange (ETDEWEB)

    1969-01-01

    This report presents the results of a National Energy Board staff study of energy supply and demand in Canada to 1990. The study covers all forms of energy in Canada, and probable sources of supply for serving both indigenous and export demand for Canadian energy. Energy demand by market sector (residential and commercial, industrial, and transportation) is discussed in Chapters III, IV and V, respectively. Chapters VI, VII, VIII, and IX deal with supply prospects for Canadian petroleum, natural gas, coal, and electricity serving indigenous and export markets. A summary of the report is contained in Chapter II. Appendix A reviews general assumptions including those relating to population and household growth. Appendix B summarizes the methodology used for estimating residential energy demand, automobile transportation energy demand, and electricity supply. Appendix C includes a number of tables which provide detailed information. A list of definitions and abbreviations follows the Table of Contents.

  16. Energy properties of solid fossil fuels and solid biofuels

    International Nuclear Information System (INIS)

    Holubcik, Michal; Jandacka, Jozef; Kolkova, Zuzana

    2016-01-01

    The paper deals about the problematic of energy properties of solid biofuels in comparison with solid fossil fuels. Biofuels are alternative to fossil fuels and their properties are very similar. During the experiments were done in detail experiments to obtain various properties of spruce wood pellets and wheat straw pellets like biofuels in comparison with brown coal and black coal like fossil fuels. There were tested moisture content, volatile content, fixed carbon content, ash content, elementary analysis (C, H, N, S content) and ash fusion temperatures. The results show that biofuels have some advantages and also disadvantages in comparison with solid fossil fuels.

  17. Energy properties of solid fossil fuels and solid biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Holubcik, Michal, E-mail: michal.holubcik@fstroj.uniza.sk; Jandacka, Jozef, E-mail: jozef.jandacka@fstroj.uniza.sk [University of Žilina, Faculty of Mechanical Engineering, Department of Power Engineering, Univerzitná 8215/1, 010 26 Žilina (Slovakia); Kolkova, Zuzana, E-mail: zuzana.kolkova@rc.uniza.sk [Research centre, University of Žilina, Univerzitna 8215/1, 010 26 Žilina (Slovakia)

    2016-06-30

    The paper deals about the problematic of energy properties of solid biofuels in comparison with solid fossil fuels. Biofuels are alternative to fossil fuels and their properties are very similar. During the experiments were done in detail experiments to obtain various properties of spruce wood pellets and wheat straw pellets like biofuels in comparison with brown coal and black coal like fossil fuels. There were tested moisture content, volatile content, fixed carbon content, ash content, elementary analysis (C, H, N, S content) and ash fusion temperatures. The results show that biofuels have some advantages and also disadvantages in comparison with solid fossil fuels.

  18. World Energy Outlook 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Industry and government decision-makers and others with a stake in the energy sector all benefit from the contents of World Energy Outlook (WEO) 2012. It presents authoritative projections of energy trends through to 2035 and insights into what they mean for energy security, environmental sustainability and economic development. Oil, coal, natural gas, renewables and nuclear power are all covered, together with an update on climate change issues. Global energy demand, production, trade, investment and carbon dioxide emissions are broken down by region or country, by fuel and by sector. Special strategic analyses cover: What unlocking the purely economic potential for energy efficiency could do, country by country and sector by sector, for energy markets, the economy and the environment; The Iraqi energy sector, examining both its importance in satisfying the country’s own needs and its crucial role in meeting global oil and gas demand; The water-energy nexus, as water resources become increasingly stressed and access more contentious; Measures of progress towards providing universal access to modern energy services. There are many uncertainties, but many decisions cannot wait. The insights of this publication are invaluable to those who must shape our energy future.

  19. A new paradigm for the European energy policy?

    International Nuclear Information System (INIS)

    Veyrenc, Thomas

    2010-01-01

    As the European Union adopted in 2009 an organisational framework for the energy sector (the third energy package), the author analyses and discusses the progressive evolutions of the European energy policy during the last decades. He first addresses the process of liberalization of electricity and natural gas markets (or network industries) which has been launched by the European Commission from the middle of the 1990's and has been almost achieved. He comments the break created by the emergence of the climate challenge during the 2000's which had an impact on the objectives of the European energy policy, on the environmental policy and on competitiveness. The author then addresses the emergence of concerns related to the security of energy supplies (a coherence challenge for the European policy): definition of the concept of supply security, dilemma of security of supply, discussion of the content of the Lisbon Treaty as a remedy to coherence challenge). The author then discusses these evolutions in terms of new content and continuity, questions the emergence of a European federalism and the lack of great projects

  20. HIGH PERMEABILITY MEMBRANES FOR THE DEHYDRATION OF LOW WATER CONTENT ETHANOL BY PERVAPORATION

    Science.gov (United States)

    Energy efficient dehydration of low water content ethanol is a challenge for the sustainable production of fuel-grade ethanol. Pervaporative membrane dehydration using a recently developed hydrophilic polymer membrane formulation consisting of a cross-linked mixture of poly(allyl...

  1. In rats fed high-energy diets, taste, rather than fat content, is the key factor increasing food intake: a comparison of a cafeteria and a lipid-supplemented standard diet

    Directory of Open Access Journals (Sweden)

    Laia Oliva

    2017-09-01

    Full Text Available Background Food selection and ingestion both in humans and rodents, often is a critical factor in determining excess energy intake and its related disorders. Methods Two different concepts of high-fat diets were tested for their obesogenic effects in rats; in both cases, lipids constituted about 40% of their energy intake. The main difference with controls fed standard lab chow, was, precisely, the lipid content. Cafeteria diets (K were self-selected diets devised to be desirable to the rats, mainly because of its diverse mix of tastes, particularly salty and sweet. This diet was compared with another, more classical high-fat (HF diet, devised not to be as tasty as K, and prepared by supplementing standard chow pellets with fat. We also analysed the influence of sex on the effects of the diets. Results K rats grew faster because of a high lipid, sugar and protein intake, especially the males, while females showed lower weight but higher proportion of body lipid. In contrast, the weight of HF groups were not different from controls. Individual nutrient’s intake were analysed, and we found that K rats ingested large amounts of both disaccharides and salt, with scant differences of other nutrients’ proportion between the three groups. The results suggest that the key differential factor of the diet eliciting excess energy intake was the massive presence of sweet and salty tasting food. Conclusions The significant presence of sugar and salt appears as a powerful inducer of excess food intake, more effective than a simple (albeit large increase in the diet’s lipid content. These effects appeared already after a relatively short treatment. The differential effects of sex agree with their different hedonic and obesogenic response to diet.

  2. [Low caloric value and high salt content in the meals served in school canteens].

    Science.gov (United States)

    Paiva, Isabel; Pinto, Carlos; Queirós, Laurinda; Meister, Maria Cristina; Saraiva, Margarida; Bruno, Paula; Antunes, Delfina; Afonso, Manuel

    2011-01-01

    School lunch can contribute to aggravate food quality, by excess or deficiency, or it can contribute to compensate and alleviate them. This school meal should be an answer to combating the epidemic of obesity, and to feed some grace children. The objective was to study the nutritional composition of catering in canteens of public schools, from Northern municipalities in the District of Porto: Vila do Conde, Póvoa de Varzim, Santo Tirso and Trofa. Meals were subjected to laboratory analysis. Thirty two meals, four per each school were analysed, reference values for the analysis of the nutritional composition of meals were dietary reference intakes (USA) and eating well at school (UK). The average energy meal content was 447 kcal and the median 440 kcal (22% of daily calories). The average values of nutrients, per meal, were: lipids 9, 8 g, carbohydrate 65,7 g and proteins 24,0 g. In average the contribution for the meal energy was: 20% fat, 59% carbohydrate and 21% protein. In more than 75% of meals the contribution of lipid content was below the lower bound of the reference range. The average content of sodium chloride per meal was 3.4 g, and the confidence interval 95% to average 3.0 to 3.8 g, well above the recommended maximum value of 1.5 grams. The average content fiber per meal was 10.8 g higher than the minimum considered appropriate. In conclusion, the value low caloric meals was mainly due to the low fat content, and content salt of any of the components of the meal was very high.

  3. Nuclear physical express analysis of solid fuel sulphur content

    International Nuclear Information System (INIS)

    Pak, Yu.; Ponomaryova, M

    2005-01-01

    Full text: Sulphur content is an important qualitative coal parameter. The problem of coal sulphur content determining remains one of the most important both in Kazakhstan and in other coal-mining countries. The traditional method of sampling, the final stage of which is chemical analysis of coal for sulphur, is characterized by high labour intensity and low productivity. That's why it is ineffective for mass express analytical quality control and technological schemes of coal processing control. In this connection it is very urgent to develop a method of coal sulphur content on the base of a series nuclear-geophysical equipment with an isotope source of primary radiation, allowing to increase analysis representativity and maximally take into account coal real composition inconstancy. To solve the problem set it is necessary to study the main laws of X-ray-radiometric method applied to the coal quality analysis for working out instrumental methods of speed determining of coal sulphur content with satisfactory accuracy for technological tasks, to determine laws of changing the flows of characteristic X-ray and scattered radiation from coal sulphur content of various real composition and to optimize methodical and hardware parameters, providing minimal error of sulphur content control. On the base of studying laws of real composition coal components and their interconnections with sulphur content there has been substantiated the expediency of using hardware functions of calcium and iron to control coal sulphur contents; there has been suggested a model to estimate the methodical error of coal sulphur content determining on the base of the data about sensitivity to sulphur and effecting factors using ultimate methods of coal components substitution methods allowing to optimize sulphur control parameters; there has been worked out an algorithm of X-ray-radiometric control of sulphur content based on the sequential radiating the analyzed coal with gamma-radiation of

  4. Technical note - the incorporation of ash content into gas content

    Energy Technology Data Exchange (ETDEWEB)

    Creech, M.; Mahoney, M. [Powercoal Pty. Ltd., Budgewoi, NSW (Australia)

    1995-12-31

    For gas content analysis in recent years, it has been standard procedure to report results on a `dry ash free` (daf) basis, under the assumption that gas only adsorbs onto coaly material. In order to test the relationship between ash and gas content, samples of various rock types were taken from two drillholes in the Newcastle Coalfield. The results of this study confirmed the correlation between gas content and ash, providing an accurate means of relating gas contents for all carbonaceous rock types. 4 refs., 5 figs., 1 tab.

  5. Urban Wind Energy

    DEFF Research Database (Denmark)

    Beller, Christina

    important for the implementation of wind energy conversion systems are the macro and micro wind climate, the siting within a micro wind climate and the choice of a wind turbine model most appropriate for the selected site. In the frame of this work, all these important elements are analyzed and a row......New trends e.g. in architecture and urban planning are to reduce energy needs. Several technologies are employed to achieve this, and one of the technologies, not new as such, is wind energy. Wind turbines are installed in cities, both by companies and private persons on both old and new buildings....... However, an overview of the energy content of the wind in cities and how consequently turbines shall be designed for such wind climates is lacking. The objective of the present work is to deliver an objective and fundamental overview of the social, practical and physical conditions relevant...

  6. The effect of between-breast differences on human milk macronutrients content.

    Science.gov (United States)

    Pines, N; Mandel, D; Mimouni, F B; Moran Lev, H; Mangel, L; Lubetzky, R

    2016-07-01

    Little is known about the effect of maternal handedness and preferential side of breastfeeding upon macronutrients concentration in human milk (HM). We aimed to compare macronutrients content of HM from both breasts, taking into account the self-reported preferential feeding ('dominant') breast, breast size and handedness (right versus left). We tested the null hypothesis that macronutrients content of HM is not affected by breast dominancy, breast size or maternal handedness. Fifty-seven lactating mothers were recruited. HM macronutrients were measured after mid manual expression using infrared transmission spectroscopy. Out of the 57 mothers recruited, 12 were excluded from the analyses because they brought in insufficient samples. Among the 22 who reported a size difference, 16 (73%) had a larger left breast (Pmacronutrients between the right and the left breasts. In multiple stepwise backward regression analysis, fat, carbohydrate, protein and energy contents were unaffected by maternal handedness, breast side dominance or breast size asymmetry. Macronutrients content of mid expression HM is unaffected by maternal handedness, breast size or breast side dominance.

  7. Evolution of the energy content and emissions of CO{sub 2} associated with Brazilian economic production between 1990 and 2030: a hybrid approach; Evolucao do conteudo energetico e das emissoes de CO{sub 2} associadas a producao economica brasileira entre 1990 e 2030: uma abordagem hibrida

    Energy Technology Data Exchange (ETDEWEB)

    Pereira Junior, Amaro Olimpio; Soares, Jeferson Borghetti; Oliveira, Ricardo Gorini de; Queiroz, Renato Pinto de [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)], e-mail: amaro.pereira@epe.gov.br, e-mail: jeferson.soares@epe.gov.br, e-mail: ricardo.gorini@epe.gov.br, e-mail: renato.queiroz@epe.gov.br

    2008-07-01

    This study proposes um hybrid approach to analyze the results of the Energy National Plan 2030, performed by EPE, a state owned Enterprise of Energy Research. The model integrates the energy data to macroeconomics, giving them consistence, from the input-output analysis. The resultant matrixes from this methodology are use to analyze the evolution of energy content and the CO{sub 2} emissions associated to the economic production of choose sectors. (author)

  8. Energy law and the environment

    Energy Technology Data Exchange (ETDEWEB)

    Rosemary Lyster; Adrian Bradbrook [University of Sydney, Sydney, NSW (Australia)

    2006-08-15

    The current unsustainable practices worldwide in energy production and consumption have led to a plethora of environmental problems. Until recently environmental law largely overlooked the relevance of energy production and consumption; energy was seen to be of little significance to the advancement of sustainable development. This has changed since 2000 with the global concern attached to climate change, the publication by the United Nations of the World Energy Assessment and the detailed consideration given to this issue at the World Summit on Sustainable Development in Johannesburg in 2002. Australia has been seen to be lagging behind the other major industrialised nations of the world in addressing sustainable energy issues. Contents are: Overview of energy production and use in Australia; 2. Energy technologies and sustainable development; 3. Energy, international environmental law and sustainable development; 4. Evaluating Australian government initiatives relating to energy, climate change and the environment; 5. Sustainable energy in the Australian electricity and gas sectors; 6. State government initiatives relating to energy and the environment; 7. A sustainable energy law future for Australia. 2 apps.

  9. Photoluminescence properties of cerium oxide nanoparticles as a function of lanthanum content

    International Nuclear Information System (INIS)

    Deus, R.C.; Cortés, J.A.; Ramirez, M.A.; Ponce, M.A.; Andres, J.; Rocha, L.S.R.

    2015-01-01

    Highlights: • CeO 2 nanoparticles were obtained by microwave-hydrothermal method. • Rietveld refinement reveals a cubic structure. • KOH mineralizer agent exhibit weak agglomeration at low temperature and shorter time. - Abstract: The structural and photoluminescent properties at room temperature of CeO 2 and La-doped CeO 2 particles were undertaken. The obtained particles were synthesized by a microwave-assisted hydrothermal method (MAH) under different lanthanum contents. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Fourier transform Raman (FT-Raman), Ultra-violet spectroscopy (UV–vis) and photoluminescence (PL) measurements were carried out. XRD revealed that the powders are free of secondary phases and crystallize in the cubic structure. Raman data show that increasing La doping content increase oxygen vacancies due to lattice expansion. The UV/vis absorption spectroscopy suggested the presence of intermediate energy levels in the band gap of structurally ordered powders. Lanthanum addition creates oxygen vacancies and shifts the photoluminescence in the low energy range leading to intense PL emission

  10. [Relativity among starch quantity, polysaccharides content and total alkaloid content of Dendrobium loddigesii].

    Science.gov (United States)

    Zhu, Hua; Teng, Jianbei; Cai, Yi; Liang, Jie; Zhu, Yilin; Wei, Tao

    2011-12-01

    To find out the relativity among starch quantity, polysaccharides content and total alkaloid content of Dendrobium loddigesii. Microscopy-counting process was applied to starch quantity statistics, sulfuric acid-anthrone colorimetry was used to assay polysaccharides content and bromocresol green colorimetry was used to assay alkaloid content. Pearson product moment correlation analysis, Kendall's rank correlation analysis and Spearman's concordance coefficient analysis were applied to study their relativity. Extremely significant positive correlation was found between starch quantity and polysaccharides content, and significant negative correlation between alkaloid content and starch quantity was discovered, as well was between alkaloid content and polysaccharides content.

  11. Hydrogen content in Zircaloy-IV by neutron emissions

    International Nuclear Information System (INIS)

    Granada, J.R.

    1991-01-01

    The feasibility of using thermal neutron transmission techniques to determine the initial hydrogen content in Zry-IV is discussed in this work. The usual conditions of very low H concentration (∼ 10-20 ppm in weight) in the alloy, require a high degree of accuracy in the relevant cross sections in order to obtain reliable values of that concentration from the measured transmission spectra. Total cross sections corresponding to the metallic alloy and to hydrogen in that matrix were evaluated using interaction models developed in this Laboratory, for neutrons covering the range from subthermal up to epithermal energies. The sensitivity of this method as a function of neutron energy is discussed, and an optimized and self consistent procedure for data analysis after a transmission experiment is proposed. (Author) [es

  12. Adolescent judgment of sexual content on television: implications for future content analysis research.

    Science.gov (United States)

    Manganello, Jennifer A; Henderson, Vani R; Jordan, Amy; Trentacoste, Nicole; Martin, Suzanne; Hennessy, Michael; Fishbein, Martin

    2010-07-01

    Many studies of sexual messages in media utilize content analysis methods. At times, this research assumes that researchers and trained coders using content analysis methods and the intended audience view and interpret media content similarly. This article compares adolescents' perceptions of the presence or absence of sexual content on television to those of researchers using three different coding schemes. Results from this formative research study suggest that participants and researchers are most likely to agree with content categories assessing manifest content, and that differences exist among adolescents who view sexual messages on television. Researchers using content analysis methods to examine sexual content in media and media effects on sexual behavior should consider identifying how audience characteristics may affect interpretation of content and account for audience perspectives in content analysis study protocols when appropriate for study goals.

  13. ENERGY-NET (Energy, Environment and Society Learning Network): Best Practices to Enhance Informal Geoscience Learning

    Science.gov (United States)

    Rossi, R.; Elliott, E. M.; Bain, D.; Crowley, K. J.; Steiner, M. A.; Divers, M. T.; Hopkins, K. G.; Giarratani, L.; Gilmore, M. E.

    2014-12-01

    While energy links all living and non-living systems, the integration of energy, the environment, and society is often not clearly represented in 9 - 12 classrooms and informal learning venues. However, objective public learning that integrates these components is essential for improving public environmental literacy. ENERGY-NET (Energy, Environment and Society Learning Network) is a National Science Foundation funded initiative that uses an Earth Systems Science framework to guide experimental learning for high school students and to improve public learning opportunities regarding the energy-environment-society nexus in a Museum setting. One of the primary objectives of the ENERGY-NET project is to develop a rich set of experimental learning activities that are presented as exhibits at the Carnegie Museum of Natural History in Pittsburgh, Pennsylvania (USA). Here we detail the evolution of the ENERGY-NET exhibit building process and the subsequent evolution of exhibit content over the past three years. While preliminary plans included the development of five "exploration stations" (i.e., traveling activity carts) per calendar year, the opportunity arose to create a single, larger topical exhibit per semester, which was assumed to have a greater impact on museum visitors. Evaluative assessments conducted to date reveal important practices to be incorporated into ongoing exhibit development: 1) Undergraduate mentors and teen exhibit developers should receive additional content training to allow richer exhibit materials. 2) The development process should be distributed over as long a time period as possible and emphasize iteration. This project can serve as a model for other collaborations between geoscience departments and museums. In particular, these practices may streamline development of public presentations and increase the effectiveness of experimental learning activities.

  14. Modeling on Fe-Cr microstructure: evolution with Cr content

    International Nuclear Information System (INIS)

    Diaz Arroyo, D.; Perlado, J.M.; Hernandez-Mayoral, M.; Caturla, M.J.; Victoria, M.

    2007-01-01

    Full text of publication follows: The minimum energy configuration of interstitials in the Fe-Cr system, which is the base for the low activation steels being developed in the European fusion reactor materials community, is determined by magnetism. Magnetism plays also a role in the atomic configurations found with increasing Cr content. Results will be presented from a program in which the microstructure evolution produced after heavy ion irradiation in the range from room temperature to 80 K is studied as a function of the Cr content in alloys produced under well controlled conditions, i.e. from high purity elements and with adequate heat treatment. It is expected that these measurements will serve as matrix for model validation. The first step in such modeling sequence is being performed by modeling the evolution of displacement cascades in Fe using the Dudarev -Derlet and Mendeleev potentials for Fe and the Caro potential for Fe-Cr. It is of particular interest to study the evolution of high-energy cascades, where an attempt will be made to clarify the role of the evolution of sub-cascades. Kinetic Monte Carlo (kMC) techniques will be used then to simulate the defect evolution. A new parallel kMC code is being implemented for this purpose. (authors)

  15. Modelling energy utilisation in broiler breeder hens.

    Science.gov (United States)

    Rabello, C B V; Sakomura, N K; Longo, F A; Couto, H P; Pacheco, C R; Fernandes, J B K

    2006-10-01

    1. The objective of this study was to determine a metabolisable energy (ME) requirement model for broiler breeder hens. The influence of temperature on ME requirements for maintenance was determined in experiments conducted in three environmental rooms with temperatures kept constant at 13, 21 and 30 degrees C using a comparative slaughter technique. The energy requirements for weight gain were determined based upon body energy content and efficiency of energy utilisation for weight gain. The energy requirements for egg production were determined on the basis of egg energy content and efficiency of energy deposition in the eggs. 2. The following model was developed using these results: ME = kgW0.75(806.53-26.45T + 0.50T2) + 31.90G + 10.04EM, where kgW0.75 is body weight (kg) raised to the power 0.75, T is temperature ( degrees C), G is weight gain (g) and EM is egg mass (g). 3. A feeding trial was conducted using 400 Hubbard Hi-Yield broiler breeder hens and 40 Peterson males from 31 to 46 weeks of age in order to compare use of the model with a recommended feeding programme for this strain of bird. The application of the model in breeder hens provided good productive and reproductive performance and better results in feed and energy conversion than in hens fed according to strain recommendation. In conclusion, the model evaluated predicted an ME intake which matched breeder hens' requirements.

  16. Diets of introduced predators using stable isotopes and stomach contents

    Science.gov (United States)

    Meckstroth, A.M.; Miles, A.K.; Chandra, S.

    2007-01-01

    In a study of predation on ground-nesting birds at South San Francisco Bay (South Bay), California, USA, we analyzed stomach contents and stable isotopes of carbon and nitrogen to identify commonly consumed prey. We obtained the stomach contents from 206 nonnative red foxes (Vulpes vulpes regalis) collected in the South Bay area and Monterey County during 1995-2001 and from 68 feral cats (Felis silvestris) from the South Bay area during 2001-2002. We determined prey identity, biomass, and frequency, described seasonal diet trends, and derived an Index of Relative Importance. Avian species were the most frequent prey we found in the stomachs of red foxes from South Bay (61%), whereas small rodents were most frequent for red foxes from Monterey County (62%). Small rodents were the most frequent prey we found in feral cats (63%). Carbon and nitrogen isotopic signatures for foxes supported stomach content findings. However, isotope results indicated that cats received a majority of their energy from a source other than rodents and outside the natural system, which differed from the stomach content analysis. We demonstrated the utility of both stable isotope and stomach content analyses to establish a more complete understanding of predators' diets. This information aids natural resource managers in planning and evaluating future predator-removal programs and increases our understanding of the impacts of nonnative foxes and cats on native species.

  17. Which leadership for renewable energies?

    International Nuclear Information System (INIS)

    Chaumien, Marielle

    2016-02-01

    This publication first outlines that France is late in deploying renewable energies by 2020. It comments the application of the Energy multi-year plan (PPE), evokes the content of a report by the French Court of Auditors about costs and means of implementation of transition (with notably the issue of maintenance of nuclear plants). It also shows that European Union is not a leader in renewable energies any more, that some European countries are changing sides, that figures and trends must be carefully compared with those in the field of fossil and nuclear energies, that all energies are not all the same, that jobs and system integration are also important, that investments and attractiveness of countries in renewable energies must be assessed, and that a mobilisation on small scale and consumer-based renewable energies is required. Ten recommendations are made for France to support the EU leadership development

  18. Energy harvesting autonomous sensor systems design, analysis, and practical implementation

    CERN Document Server

    Tan, Yen Kheng

    2013-01-01

    This book is the considered the first to describe sensor-oriented energy harvesting issues. Its content is derived from the author's research on the development of a truly self-autonomous and sustainable energy harvesting wireless sensor network (EH-WSN). This network harvests energy from a variety of ambient energy sources and converts it into electrical energy to power batteries. The book discusses various types of energy harvesting (EH) systems and their respective main components.

  19. Engineers, energy and public concern

    International Nuclear Information System (INIS)

    Forrest, J.S.

    1981-01-01

    This lecture points out that the majority of engineers are content to allow their profession to be undervalued in the eyes of society. On many issues, energy in particular, the engineer has an authoritative voice to speak with, and an incisive point to argue. U.K. energy policy is discussed and a programme is suggested to include breeder reactors and generation of 60% of the electricity demand by nuclear stations by A.D. 2000. (U.K.)

  20. Certification of reference materials by energy-dispersive x-ray fluorescence spectrometry?

    DEFF Research Database (Denmark)

    Christensen, Leif Højslet; Heydorn, Kaj

    1985-01-01

    This paper studies the precision and accuracy that can be achieved using energy-dispersive x-ray fluorescence spectrometry for the determination of total sulphur content in BCR 38 Fly Ash issued by the European Community Bureau of Reference.......This paper studies the precision and accuracy that can be achieved using energy-dispersive x-ray fluorescence spectrometry for the determination of total sulphur content in BCR 38 Fly Ash issued by the European Community Bureau of Reference....

  1. Subclinical Ketosis on Dairy Cows in Transition Period in Farms with Contrasting Butyric Acid Contents in Silages

    Directory of Open Access Journals (Sweden)

    Fernando Vicente

    2014-01-01

    Full Text Available This study examines the relationship between subclinical ketosis (SCK in dairy cows and the butyric acid content of the silage used in their feeding. Twenty commercial farms were monitored over a period of 12 months. The feed at each farm and the silages used in its ration were sampled monthly for proximal analysis and for volatile fatty acid analysis. A total of 2857 urine samples were taken from 1112 cows to examine the ketonuria from about 30 days prepartum to 100 postpartum. Wide variation was recorded in the quality of silages used in the preparation of diets. Approximately 80% of the urine samples analyzed had no detectable ketone bodies, 16% returned values indicative of slight SCK, and the remainder, 4%, showed symptoms of ketosis. Most of the cases of hyperkenuria were associated with the butyric acid content of the silage used (r2=0.56; P<0.05. As the metabolizable energy content of the feed was similar, no relationship was observed between the proportion of cows with SCK and the energy content of the feed. In our study, the probability of dairy cows suffering SCK is higher when they are eating feed made from silage with a high butyric acid content (35.2 g/kg DM intake.

  2. Subclinical ketosis on dairy cows in transition period in farms with contrasting butyric acid contents in silages.

    Science.gov (United States)

    Vicente, Fernando; Rodríguez, María Luisa; Martínez-Fernández, Adela; Soldado, Ana; Argamentería, Alejandro; Peláez, Mario; de la Roza-Delgado, Begoña

    2014-01-01

    This study examines the relationship between subclinical ketosis (SCK) in dairy cows and the butyric acid content of the silage used in their feeding. Twenty commercial farms were monitored over a period of 12 months. The feed at each farm and the silages used in its ration were sampled monthly for proximal analysis and for volatile fatty acid analysis. A total of 2857 urine samples were taken from 1112 cows to examine the ketonuria from about 30 days prepartum to 100 postpartum. Wide variation was recorded in the quality of silages used in the preparation of diets. Approximately 80% of the urine samples analyzed had no detectable ketone bodies, 16% returned values indicative of slight SCK, and the remainder, 4%, showed symptoms of ketosis. Most of the cases of hyperkenuria were associated with the butyric acid content of the silage used (r2=0.56; P<0.05). As the metabolizable energy content of the feed was similar, no relationship was observed between the proportion of cows with SCK and the energy content of the feed. In our study, the probability of dairy cows suffering SCK is higher when they are eating feed made from silage with a high butyric acid content (35.2 g/kg DM intake).

  3. Impact of moisture content in AAC on its heat insulation properties

    Science.gov (United States)

    Rubene, S.; Vilnitis, M.

    2017-10-01

    One of the most popular trends in construction industry is sustainable construction. Therefore, application of construction materials with high insulation characteristics has significantly increased during the past decade. Requirements for application of construction materials with high insulation parameters are required not only by means of energy saving and idea of sustainable construction but also by legislative requirements. Autoclaved aerated concrete (AAC) is a load bearing construction material, which has high heat insulation parameters. However, if the AAC masonry construction has high moisture content the heat insulation properties of the material decrease significantly. This fact lead to the necessity for the on-site control of moisture content in AAC in order to avoid inconsistency between the designed and actual thermal resistivity values of external delimiting constructions. Research of the impact of moisture content in AAC on its heat insulation properties has been presented in this paper.

  4. The economic benefits of sorting SPF lumber to be kiln-dried on the basis of initial moisture content

    International Nuclear Information System (INIS)

    Warren, S.; Johnson, G.

    1997-01-01

    This study evaluates the economic benefits of sorting green lumber into moisture content classes before kiln-drying. Laser moisture sensing technology was implemented in the sawmill for sorting purposes. The grade outturn and energy savings resulting from shortened drying times were examined. The final moisture content distribution resulting from moisture sorting did not show overdrying or underdrying. Based on grade outturn, the benefits were as much as $15.94 per thousand board feet (MBF) for 2 by 4 by 16 lumber and $19.66 per MBF for 2 by 6 by 16 lumber; energy savings were $1.88 per thousand board feet

  5. Public opinion survey on energy

    International Nuclear Information System (INIS)

    1981-01-01

    The results of a public opinion survey on energy, conducted by Prime Minister's Office from November 26 to December 2, 1980, are described. Of the sampling of 5,000 adults throughout the nation, 4,113 replied the questions. The contents are as follows: awaraness of energy conservation, projection of the future of nuclear power, uneasiness about nuclear power, and energy policies. Concerning the major power generation system of the future, 47% of the people mentioned nuclear energy, followed by 18% mentioned solar energy. As to the future share of nuclear power, 38% favored its increase, 28% its maintaining at the current level, and only 5% wanted its decrease. About the feeling of uneasiness, 56% felt uneasiness and 44% were secure, making it clear that the uneasiness has not yet been eliminated. (J.P.N.)

  6. Influence of hydrogen content on impact toughness of Zr-2.5Nb pressure tube alloy

    Energy Technology Data Exchange (ETDEWEB)

    Singh, R.N., E-mail: rnsingh@barc.gov.in [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Viswanathan, U.K.; Kumar, Sunil; Satheesh, P.M.; Anantharaman, S. [Post Irradiation Examination Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Chakravartty, J.K. [Mechanical Metallurgy Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Stahle, P. [Division of Solid Mechanics, Lund University/LTH, SE22100 Lund (Sweden)

    2011-07-15

    Highlights: > For the first time impact behaviour of Zr-2.5Nb pressure tube material used in Indian Pressurized Heavy Water Reactor (IPHWR) as a function of hydrogen content and temperature is being reported. > The critical hydrogen concentration to cause low energy fracture at 25 and 200 deg. C is suggested. > The impact behaviour is rationalized in terms of hydrogen content, test temperature, microstructural features and state of stress ahead of a crack. - Abstract: Influence of hydrogen content on the impact toughness of Zr-2.5% Nb alloy was examined by carrying out instrumented drop weight tests in the temperature range of 25-250 deg. C using curved Charpy specimens fabricated from unirradiated pressure tubes of Indian Pressurized Heavy Water Reactor (IPHWR). Hydrogen content of the samples was between 10 and 170 ppm by weight (wppm). Sharp ductile-to-brittle-transition behaviour was demonstrated by hydrided materials. The temperature for the onset of transition increased with the increase in the hydrogen content of the specimens. The fracture surfaces of unhydrided specimen exhibited ductile fracture caused by micro void coalescence and tear ridges at lower temperatures and by fibrous fracture at intermediate and at higher temperatures. Except for the samples tested at the upper shelf energy levels, the fracture surfaces of all hydrided samples were suggestive of hydride assisted failure. In most cases the transverse cracks observed in the fracture path matched well with the hydride precipitate distribution and orientation.

  7. Nuclear energy: today and tomorrow in the RSA

    International Nuclear Information System (INIS)

    Schumann, W.A.

    1985-01-01

    The energy content of relevant materials and world energy resources are briefly discussed. A short review is given of the typical fission fuel cycle. The article also covers the fundamental aspects of uranium enrichment and the disposal of radio-active material as part of the conventional nuclear fuel cycle. The present nuclear energy situation and possible alternatives for the future of power supply in South Africa is discussed. The alternative energy production systems are based on the spectrum of choices presented by the nuclear energy continuum of nuclear fission, fusion and spallation particle accelerator systems

  8. Caffeinated Energy Drinks -- A Growing Problem

    Science.gov (United States)

    Reissig, Chad J.; Strain, Eric C.; Griffiths, Roland R.

    2009-01-01

    Since the introduction of Red Bull in Austria in 1987 and in the United States in 1997, the energy drink market has grown exponentially. Hundreds of different brands are now marketed, with caffeine content ranging from a modest 50 mg to an alarming 505 mg per can or bottle. Regulation of energy drinks, including content labeling and health warnings differs across countries, with some of the most lax regulatory requirements in the U.S. The absence of regulatory oversight has resulted in aggressive marketing of energy drinks, targeted primarily toward young males, for psychoactive, performance-enhancing and stimulant drug effects. There are increasing reports of caffeine intoxication from energy drinks, and it seems likely that problems with caffeine dependence and withdrawal will also increase. In children and adolescents who are not habitual caffeine users, vulnerability to caffeine intoxication may be markedly increased due to an absence of pharmacological tolerance. Genetic factors may also contribute to an individual’s vulnerability to caffeine related disorders including caffeine intoxication, dependence, and withdrawal. The combined use of caffeine and alcohol is increasing sharply, and studies suggest that such combined use may increase the rate of alcohol-related injury. Several studies suggest that energy drinks may serve as a gateway to other forms of drug dependence. Regulatory implications concerning labeling and advertising, and the clinical implications for children and adolescents are discussed. PMID:18809264

  9. Local Content

    CSIR Research Space (South Africa)

    Gibberd, Jeremy

    2016-10-01

    Full Text Available Local content refers to materials and products made in a country as opposed those that are imported. There is an increasing interest in the concept of local content as a means of supporting local economies and providing jobs (Belderbos & Sleuwaegen...

  10. Energy of knots and conformal geometry

    CERN Document Server

    O'Hara, Jun

    2003-01-01

    Energy of knots is a theory that was introduced to create a "canonical configuration" of a knot - a beautiful knot which represents its knot type. This book introduces several kinds of energies, and studies the problem of whether or not there is a "canonical configuration" of a knot in each knot type. It also considers this problems in the context of conformal geometry. The energies presented in the book are defined geometrically. They measure the complexity of embeddings and have applications to physical knotting and unknotting through numerical experiments. Contents: In Search of the "Optima

  11. Assessment of the energy recovery potentials of solid waste ...

    African Journals Online (AJOL)

    Otoigiakih

    The main attributes of waste as a fuel are water content, calorific value, and burnable content. The study was conducted to evaluate the energy recovery potential of solid waste generated in. Akosombo. A total of twelve (12) samples were collected from the township in December, 2012 (dry month) and May, 2013 (Wet ...

  12. Measuring of moisture content in biofuel; Fukthaltsmaetning av biobraensle

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Lars; Njurell, Rolf; Ehleskog, Rickard [AaF Energikonsult AB, Stockholm (Sweden)

    2002-04-01

    Direct determination of the moisture content, i.e. analysis of the fuel, is the most dominating moisture measuring method of today, and is usually done manually by weighing and drying a sample. By measuring on the exhaust gases the moisture content is determined indirect. This method is based upon the fact that there is a relation between the moisture content in the fuel and in the exhaust gases. This is an alternative that is only considered briefly in this report. Acceptance test of the fuel today takes place in several ways. The methods vary from advanced automatic mechanical devices to manually taken tests made by the driver him self. In the simplest case when the plant only has one fuel supplier, deduction is maid against the amount of produced energy. There are no systems today that can automatically take tests for continuous measuring. This project aims to find methods that are practical for direct, automatic and continuous measurement of the moisture content for the following applications: Moisture determination of fuel supplies, acceptance test. Moisture determination for combustion control in furnaces and boilers. The possibilities to automate the sampling are discussed in detail, at which important background information concerning the handling problems associated with the point of measuring is illustrated. The measurement techniques that are described more in detail are NIR (Near Infra Red), radar technique, microwave technique, radio frequency scan, radioactive technique, double energy X-ray and some combinations of these techniques. In the report, suppliers of interesting instruments are presented. The fundamental technical demands and the basis that should be included in a specification of a measuring device are gathered. Our appraisal is that a sequel to this project should be concentrated on the following main issues: Automatic acceptance test: The measuring is suggested to be done with a test probe direct in the incoming batch. The most suited

  13. Effects of Xe Gas Content and Total Gas Pressure on the Discharge Characteristics of Colour Plasma Display Panels

    International Nuclear Information System (INIS)

    Hu Wenbo; Han Mengju; Liang Zhihu

    2006-01-01

    The effects of the Xe gas content and total gas pressure on the discharge characteristics of colour plasma display panels including the sustaining voltage margin, white-field chromaticity, discharge time lag (DTL), discharge current peak, and full-width-at-half-maximum (FWHM) of the discharge current pulse, are experimentally studied. The results indicate that as the Xe gas content in the He-Ne-Xe gas mixture or total pressure increases, the sustaining voltage margin increases, the white-field chromaticity improves, and the discharge current peak has a maximum value, while DTL and FWHM have a minimum value. The mean electron energy in the gas mixture discharge is also calculated through a numerical solution of Boltzmann equation. The experimental results are explained from a view of the mean electron energy variations with the Xe gas content and total gas pressure

  14. Emotions in overweight and normal-weight women immediately after eating foods differing in energy.

    Science.gov (United States)

    Macht, Michael; Gerer, Jutta; Ellgring, Heiner

    2003-11-01

    Immediate effects of low-, medium-, and high-energy foods on the emotional state of normal-weight and overweight women were studied experimentally. Nineteen normal-weight (body mass index [BMI]: 19-25 kg/m2) and 19 overweight women (BMI: 26-40 kg/m2) aged 18-40 years received samples of food that differed in energy content (low vs. medium vs. high energy) and rated their emotional state immediately after eating. Perceived characteristics of the foods and associations elicited by the foods were also obtained. Negative emotions (anger, fear, shame, and sadness) and sleepiness increased, while happiness decreased with energy of foods. Emotionally negative associations were more frequent, while positive emotions were less frequent the higher the energy content of the foods. Sadness, shame, fear, and sleepiness after eating high-energy food tended to be more intense in overweight women. Additional analyses demonstrated influences of eating habits, e.g., disinhibition. The higher the energy content of a food stimulus, the more it was viewed as "unhealthy" and "dangerous." It is suggested that immediate food-induced changes of emotions can be explained by activation of associative emotion networks.

  15. Symmetry energy in the liquid–gas mixture

    Energy Technology Data Exchange (ETDEWEB)

    López, J.A., E-mail: jorgelopez@utep.edu [University of Texas at El Paso, El Paso, TX 79968 (United States); Terrazas Porras, S. [Universidad Autónoma de Ciudad Juárez, Ciudad Juárez, Chihuahua (Mexico)

    2017-01-15

    Results from classical molecular dynamics simulations of infinite nuclear systems with varying density, temperature and isospin content are used to calculate the symmetry energy at low densities. The results show an excellent agreement with the experimental data and corroborate the claim that the formation of clusters has a strong influence on the symmetry energy in the liquid–gas coexistence region.

  16. Proceedings of the National Renewable Energy Laboratory Wind Energy Systems Engineering Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Dykes, K.

    2014-12-01

    The second National Renewable Energy Laboratory (NREL) Wind Energy Systems Engineering Workshop was held in Broomfield, Colorado, from January 29 to February 1, 2013. The event included a day-and-a-half workshop exploring a wide variety of topics related to system modeling and design of wind turbines and plants. Following the workshop, 2 days of tutorials were held at NREL, showcasing software developed at Sandia National Laboratories, the National Aeronautics and Space Administration's Glenn Laboratories, and NREL. This document provides a brief summary of the various workshop activities and includes a review of the content and evaluation results from attendees.

  17. Fatty Acid Content of Indonesian Aquatic Microalgae

    Directory of Open Access Journals (Sweden)

    TRI PRARTONO

    2010-12-01

    Full Text Available High utilization of fossil fuel increases the level of carbon dioxide in the atmosphere and results in global warming phenomenon. These things establish the world's thought to look for the other alternative energy that can reduce the use of fossil fuel even to be replaced by the substitute. Recently, Indonesia has been doing the research of microalgae as a feedstock of an alternative biofuel. Fatty acid content that microalgae have is also high to produce biofuel. The steps used in this research is a 7 days cultivation, harvesting, extraction using hexane, and fatty acid identification using Gas Chromatography of microalgae species. Fatty acid component in some species such as Chlorella sp., Scenedesmus sp., Nannochloropsis sp., and Isochrysis sp. is between 0.21-29.5%; 0.11-25.16%; 0.30-42.32%; 2.06-37.63%, respectively, based on dry weight calculation. The high content of fatty acid in some species of microalgae showed the potential to be the feedstock of producing biofuel in overcoming the limited utilization from petroleum (fossil fuel presently.

  18. Exciton binding energy in GaAsBiN spherical quantum dot heterostructures

    Science.gov (United States)

    Das, Subhasis; Dhar, S.

    2017-03-01

    The ground state exciton binding energies (EBE) of heavy hole excitons in GaAs1-x-yBixNy - GaAs spherical quantum dots (QD) are calculated using a variational approach under 1s hydrogenic wavefunctions within the framework of effective mass approximation. Both the nitrogen and the bismuth content in the material are found to affect the binding energy, in particular for larger nitrogen content and lower dot radii. Calculations also show that the ground state exciton binding energies of heavy holes increase more at smaller dot sizes as compared to that for the light hole excitons.

  19. A Fair Contention Access Scheme for Low-Priority Traffic in Wireless Body Area Networks

    Directory of Open Access Journals (Sweden)

    Shagufta Henna

    2017-08-01

    Full Text Available Recently, wireless body area networks (WBANs have attracted significant consideration in ubiquitous healthcare. A number of medium access control (MAC protocols, primarily derived from the superframe structure of the IEEE 802.15.4, have been proposed in literature. These MAC protocols aim to provide quality of service (QoS by prioritizing different traffic types in WBANs. A contention access period (CAPwith high contention in priority-based MAC protocols can result in higher number of collisions and retransmissions. During CAP, traffic classes with higher priority are dominant over low-priority traffic; this has led to starvation of low-priority traffic, thus adversely affecting WBAN throughput, delay, and energy consumption. Hence, this paper proposes a traffic-adaptive priority-based superframe structure that is able to reduce contention in the CAP period, and provides a fair chance for low-priority traffic. Simulation results in ns-3 demonstrate that the proposed MAC protocol, called traffic- adaptive priority-based MAC (TAP-MAC, achieves low energy consumption, high throughput, and low latency compared to the IEEE 802.15.4 standard, and the most recent priority-based MAC protocol, called priority-based MAC protocol (PA-MAC.

  20. What's More Important--Literacy or Content? Confronting the Literacy-Content Dualism

    Science.gov (United States)

    Draper, Roni Jo; Smith, Leigh K.; Hall, Kendra M.; Siebert, Daniel

    2005-01-01

    The literacy-content dualism, which suggests that teachers must decide whether to provide literacy or content instruction, is a false dualism and adherence to it is detrimental to student participation in content-area reasoning, learning, and communicating. This article describes the experiences that prompted the teacher educators who authored…

  1. 21 CFR 101.60 - Nutrient content claims for the calorie content of foods.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Nutrient content claims for the calorie content of... Claims § 101.60 Nutrient content claims for the calorie content of foods. (a) General requirements. A claim about the calorie or sugar content of a food may only be made on the label or in the labeling of a...

  2. Metabolizable energy levels for meat quails from 15 to 35 days of age

    Directory of Open Access Journals (Sweden)

    Jorge Cunha Lima Muniz

    Full Text Available ABSTRACT: This trial was carried out to evaluate the effects of dietetic metabolizable energy levels on performance and carcass traits of meat quails from 15 to 35 days old. Five hundred sixty, 15-d old, meat quails were randomly assigned to five treatments (2.850; 2.950; 3.050; 3.150 e 3.250kcal of ME kg-1 of diet, with eight replicates and fourteen birds per experimental unit. Feed intake, protein and lysine intake and feed conversion decreased linearly as the metabolizable energy content of diets increased (P0.05 by the treatments. Diets did not influence (P>0.05 carcass traits as dry matter, moisture and protein content in carcass. However a quadratic effect (P<0.04 were observed on carcass fat content. Based on these results, the adequate metabolizable energy level to ensure better meat quails' growth is 3.250kcal of ME kg-1 diet, that corresponds to a metabolizable energy: crude protein ratio of 139,24.

  3. Improving Energy Efficiency in Idle Listening of IEEE 802.11 WLANs

    Directory of Open Access Journals (Sweden)

    Muhammad Adnan

    2016-01-01

    Full Text Available This paper aims to improve energy efficiency of IEEE 802.11 wireless local area networks (WLANs by effectively dealing with idle listening (IL, which is required for channel sensing and is unavoidable in a contention-based channel access mechanism. Firstly, we show that IL is a dominant source of energy drain in WLANs and it cannot be effectively alleviated by the power saving mechanism proposed in the IEEE 802.11 standard. To solve this problem, we propose an energy-efficient mechanism that combines three schemes in a systematic way: downclocking, frame aggregation, and contention window adjustment. The downclocking scheme lets a station remain in a semisleep state when overhearing frames destined to neighbor stations, whereby the station consumes the minimal energy without impairing channel access capability. As well as decreasing the channel access overhead, the frame aggregation scheme prolongs the period of semisleep time. Moreover, by controlling the size of contention window based on the number of stations, the proposed mechanism decreases unnecessary IL time due to collision and retransmission. By deriving an analysis model and performing extensive simulations, we confirm that the proposed mechanism significantly improves the energy efficiency and throughput, by up to 2.8 and 1.8 times, respectively, compared to the conventional power saving mechanisms.

  4. Energy accounting. Comptabilite de la gestion energetique

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This manual is intended to assist Canadian firms and organizations in the industrial, commercial and institutional sectors to design and implement an appropriate energy accounting system capable of monitoring energy productivity and performance. The manual provides a standard account format applicable to both single- and multi-unit organizations, and is presented through the use of text, forms, and numerical examples. It includes the basic concepts and relevant approaches, reporting considerations, the measurement of production outputs and energy inputs, and the measurement of energy productivity. Appendices provide a glossary of terms, calorific contents of energy commodities, metric conversion factors and prefixes, and a set of blank forms. 2 figs., 3 tabs.

  5. Solar energy after Fukushima: the new deal

    International Nuclear Information System (INIS)

    Boisgibault, Louis

    2011-01-01

    This document contains a brief presentation, the preface, and the table of contents of a book which addresses the major technological, regulatory and geostrategic challenges for solar energy in the current energy context. The author outlines the strong emergence of China in this sector, but also that of new opportunities in Africa, and the need for France to strengthen European-Mediterranean collaborations in order not to definitely loose a leadership position. While referring to the environmental context, to practical examples and installations, the author explains the difficult taking off of solar energy before March 2011, why the Fukushima is a turning point for solar energy, and why solar energy will prevail

  6. Magnetic energy density and plasma energy density in the Venus wake

    Science.gov (United States)

    Perez De Tejada, H. A.; Durand-Manterola, H. J.; Lundin, R.; Barabash, S.; Zhang, T.; Reyes-Ruiz, M.; Sauvaud, J.

    2013-05-01

    Magnetic energy density and plasma energy density in the Venus wake H. Pérez-de-Tejada1, H. Durand-Manterola1, R. Lundin2, S. Barabash2, T. L. Zhang3, A. Sauvaud4, M. Reyes-Ruiz5. 1 - Institute of Geophysics, UNAM, México, D. F. 2 - Swedish Institute of Space Physics, Umea, Sweden 3 - Space Research Institute, Graz, Austria 4 - CESR, Toulouse, France 5 - Institute of Astronomy, UNAM, Ensenada, México Measurements conducted in the Venus wake with the magnetometer and the Aspera-4 plasma instrument of the Venus Express spacecraft show that average values of the kinetic energy density of the plasma in that region are comparable to average local values of the magnetic energy density. Observations were carried out in several orbits of the Venus Express near the midnight plane and suggest that the total energy content in the Venus wake is distributed with nearly comparable values between the plasma and the magnetic field. Processes associated with the solar wind erosion of planetary ions from the polar magnetic regions of the ionosphere are involved in the comparable distribution of both energy components.

  7. Global Energy Issues and Alternate Fueling

    Science.gov (United States)

    Hendricks, Robert C.

    2007-01-01

    This viewgraph presentation describes world energy issues and alternate fueling effects on aircraft design. The contents include: 1) US Uses about 100 Quad/year (1 Q = 10(exp 15) Btu) World Energy Use: about 433 Q/yr; 2) US Renewable Energy about 6%; 3) Nuclear Could Grow: Has Legacy Problems; 4) Energy Sources Primarily NonRenewable Hydrocarbon; 5) Notes; 6) Alternate Fuels Effect Aircraft Design; 7) Conventional-Biomass Issue - Food or Fuel; 8) Alternate fuels must be environmentally benign; 9) World Carbon (CO2) Emissions Problem; 10) Jim Hansen s Global Warming Warnings; 11) Gas Hydrates (Clathrates), Solar & Biomass Locations; 12) Global Energy Sector Response; 13) Alternative Renewables; 14) Stratospheric Sulfur Injection Global Cooling Switch; 15) Potential Global Energy Sector Response; and 16) New Sealing and Fluid Flow Challenges.

  8. Plasmaspheric electron content

    International Nuclear Information System (INIS)

    Hartmann, G.K.

    1978-01-01

    Measurements of the plasmaspheric electron content are reviewed with particular reference to the ATS-6 radio beacon experiment. From the review, it appears likely that measurement of the plasmaspheric electron content is the only one capable of monitoring electron fluxes continuously between L 1 and L 2. Some recent important results deduced from plasmaspheric electron content measurements are discussed

  9. Selenium contents of Japanese foodstuffs by neutron activation analysis

    International Nuclear Information System (INIS)

    Noda, Katsuhiko; Hirai, Shoji; Danbara, Hiroshi.

    1980-01-01

    Selenium (Se) contents of Japanese foodstuffs were measured by neutron activation analyses with the TRIGA-II reactor in Atomic Energy Research Laboratory, Musashi Institute of Technology. Freezedried samples (200 - 500 mg) were irradiated in the pneumatic tube (thermal neutron flux, 1 x 10 12 n.cm -2 . sec -1 ) for 10 sec, and sup(77m)Se produced was counted for 30 sec in a gamma -ray spectrometer system equipped with a Ge(Li) detector. Samples containing less than 0.05 ppm Se and the processed foods of high salt contents were analyzed with radioactivities of 75 Se after irradiation in the central symble (thermal neutron flux, 4 x 10 12 n.cm -2 .sec -1 ) for 5 hours, digestion in the HNO 3 -HClO 4 mixture, and then purification by a precipitation process. Foodstuffs of animal origins contained more Se than those of plant origins. Se contents were as follows in the descending order: fish, meats, cereals, vegetables, and fruit. Daily per capital intaked of Se was in the range of 100 - 200 mu g, as calculated for and as found by analysis of composite diets representing ordinary Japanese meals. (author)

  10. Evaluation of ultra-high-performance-fiber reinforced concrete binder content using the response surface method

    International Nuclear Information System (INIS)

    Aldahdooh, M.A.A.; Muhamad Bunnori, N.; Megat Johari, M.A.

    2013-01-01

    Highlights: • We develop a practical method for adjusting the binder content of UHP-FRC. • We adjust the binder content of UHP-FRC mixtures using RSM. • Increasing the cement content does not contribute to enhance strength. • Increasing the content of cement will increase the flow of UHP-FRC mixtures. - Abstract: One of the major disadvantages in ultra-high-performance-fiber reinforced concrete (UHP-FRC) is its high ordinary Portland cement (OPC) content, which directly translates into an increase in OPC production. More OPC production results in increased emission of greenhouse gases, as well increased electrical energy consumption and concrete price. This study is aimed at adjusting the binder content (OPC and silica fume (SF) contents) of UHP-FRC using the response surface method. The present investigation shows that, for a given water/binder and superplasticizer/OPC, the compressive strength is independent of the binder content, whereas the flow depends on the binder content. Increasing the binder content does not enhance the strength compared with the required design strength because the capillary porosity increases with increasing OPC content; however, the workability increases. The final result is the production of a UHP-FRC with an OPC content of 720.49 kg/m 3 , an SF content of 214.25 kg/m 3 , a compressive strength of 181.41 MPa, a direct tensile strength of 12.49 MPa, a bending tensile strength of 30.31 MPa, and a flow of 167 mm

  11. The impact of image-size manipulation and sugar content on children's cereal consumption.

    Science.gov (United States)

    Neyens, E; Aerts, G; Smits, T

    2015-12-01

    Previous studies have demonstrated that portion sizes and food energy-density influence children's eating behavior. However, the potential effects of front-of-pack image-sizes of serving suggestions and sugar content have not been tested. Using a mixed experimental design among young children, this study examines the effects of image-size manipulation and sugar content on cereal and milk consumption. Children poured and consumed significantly more cereal and drank significantly more milk when exposed to a larger sized image of serving suggestion as compared to a smaller image-size. Sugar content showed no main effects. Nevertheless, cereal consumption only differed significantly between small and large image-sizes when sugar content was low. An advantage of this study was the mundane setting in which the data were collected: a school's dining room instead of an artificial lab. Future studies should include a control condition, with children eating by themselves to reflect an even more natural context. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Characteristics of Ampel bamboo as a biomass energy source potential in Bali

    Science.gov (United States)

    Sucipta, M.; Putra Negara, D. N. K.; Tirta Nindhia, T. G.; Surata, I. W.

    2017-05-01

    Currently, non-renewable fossil energy dominates utilization of the world energy need for many applications. Efforts has been developed to find alternative renewable energy sources, due to fossil energy availability is diminishing. And one of renewable energy source is from biomass. The aim of this research is to determine characteristics of the Ampel bamboo (Bambusa vulgaris) as an energy potential of biomass. The Ampel bamboo’s characteristics possessed are evaluated based on its chemical composition; moisture, volatile, ash, and fixed carbon through proximate analysis; and also carbon, hydrogen and nitrogen content through ultimate analysis. From the Thermo-gravimetric analysis (TGA) indicates that Ampel bamboo contains of about 18.10% hemicelluloses, 47.75% cellulose and 18.86% lignin. While from the ultimate analysis results in the content of carbon, hydrogen, and Nitrogen of Ampel bamboo are 39.75%, 5.75% and 0% respectively. With such characteristics, it indicates that Ampel bamboo has an attractive potential as a renewable energy source.

  13. National energy efficiency programme

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper focusses on energy conservation and specifically on energy efficiency which includes efficiency in the production, delivery and utilisation of energy as part of the total energy system of the economy. A National Energy Efficiency Programme is being launched in the Eighth Plan that will take into account both macro level and policy and planning considerations as well as micro level responses for different category of users in the industry, agriculture, transport and domestic sectors. The need for such a National Energy Efficiency Programme after making an assessment of existing energy conservation activities in the country is discussed. The broad framework and contents of the National Energy Efficiency Programme have been outlined and the Eighth Plan targets for energy conservation and their break-up have been given. These targets, as per the Eighth Plan document are 5000 MW in electricity installed capacity and 6 million tonnes of petroleum products by the terminal year of the Eighth Plan. The issues that need to be examined for each sector for achieving the above targets for energy conservation in the Eighth Plan are discussed briefly. They are: (a) policy and planning, (b) implementation arrangements which include the institutional setup and selective legislation, (c) technological requirements, and (d) resource requirements which include human resources and financial resources. (author)

  14. Folic acid content and antioxidant activity of different types of beers available in Hungarian retail.

    Science.gov (United States)

    Koren, Dániel; Orbán, Csaba; Galló, Nóra; Kun, Szilárd; Vecseri-Hegyes, Beáta; Kun-Farkas, Gabriella

    2017-04-01

    In this study 40 Hungarian retail beers were evaluated for folic acid content, antioxidant profile and physicochemical parameters. The physicochemical parameters, folic acid content and antioxidant activity of alcohol-free beers were the lowest. Folic acid content of beers aged with sour cherries showed high values, more than 0.4 mg/l and an alcohol-free beer-based mixed drink made with lemon juice contained more than 0.2 mg/l of folic acid. Dark beers and beers aged with sour cherries had the highest antioxidant activity probably owing to their high extract content, components released from the fruits and special malts. These results highlight the possibility of achieving adequate folic acid and relevant antioxidant intake without excessive alcohol and energy consumption by selecting appropriate beer types.

  15. The influence of Co content on the luminescence properties of Co-doped ZnO nanoparticles

    Science.gov (United States)

    Guo, Shuxia; Jiang, Haitao

    2018-04-01

    Co-doped ZnO nanoparticles have been synthesized by co-precipitation technique. Photoluminescence spectra change in the range from 350 nm to 600 nm and remain unchanged at about 690 nm with the Co content increase. The UV emission is assigned to exciton emission. The density of band-edge states increases with Co content. The blue emission could be ascribed to the recombination of electrons in Co+ ions and holes in the valence band, whose relative intensity and full-width at half-maximum (FWHM) increase with the increase of cobalt concentration. The red emission results from the intra-d-shell emission at Co, which is independent of Co content. The relative density and energy-level position of green emission centers are also influenced by Co content.

  16. Energy transition: towards landscape devastation?

    International Nuclear Information System (INIS)

    Posokhow, Andre

    2013-09-01

    The author criticizes some aspects of the content of the French policy for energy transition. He states that the objective of reduction of greenhouse emissions is unreachable and moreover useless when China keeps on opening new coal-fired power stations. He states that temperatures do not increase any longer and that it is not sure that CO 2 emissions are responsible for past increases. He outlines that the power of wind turbines is only a quarter of their theoretical one, that replacing nuclear energy by wind energy would require the installation of 33.000 wind turbines. He states that objectives of energy saving are not credible, and that the energy mix predictions are fuzzy. He outlines contradictions about the nuclear power station life duration, states that the installation of 210 wind turbines per district would devastate the French landscape

  17. Which tools for energy transition and the Energiewende?

    International Nuclear Information System (INIS)

    Barthet, Marie-Claire; Nedey, Fabienne; Tourneur, Jean-Claude

    2015-01-01

    In this set of articles, the first one comments the emergence of standard tools to assess energy efficiency within the frame of energy transition. These standards concern eight different fields and can be applied by enterprises and also used by local communities to assess their energy saving policy. The second article comments the content of a French standard elaborated by a professional association gathering actors of the illuminated sign and signing sector; this standard addresses the design and manufacturing of these products, and technical, energetic as well as aesthetic aspects. The third article presents and comments the application in Bordeaux and in Nantes of a new European directive for public lighting which resulted in a renewal of the installation. The fourth article comments the content of the French law on energy transition, notably regarding the production or improvement of buildings and dwellings to save energy, the development of cleaner transports, waste recycling, the development of renewable energies, and the struggle against energy poverty. The next article reports the main parts of an intervention of the German minister of Foreign Affairs on the German policy for energy transition (the so-called Energiewende). The last article comments the road-map for energy transition in Germany as it has been recently defined by the German government. Several topics are notably addressed: co-generation, energy efficiency, transformation of coal power plants, reduction of CO 2 emissions by the coal industry, extension of the electric grid, financing the dismantling of nuclear power stations

  18. Developing a predictive model for the energy content of goat milk as the basis for a functional unit formulation to be used in the life cycle assessment of dairy goat production systems.

    Science.gov (United States)

    Danieli, P P; Ronchi, B

    2018-02-01

    Recent reports on livestock environmental impact based on life cycle assessment (LCA) did not fully consider the case of the dairy goat. Assignment of an environmental impact (e.g. global warming potential) to a specific product needs to be related to the appropriate 'unitary amount' or functional unit (FU). For milk, the energy content may provide a common basis for a definition of the FU. To date, no ad hoc formulations for the FU of goat milk have been proposed. For these reasons, this study aimed to develop and test one or more predictive models (DPMs) for the gross energy (GE) content of goat milk, based on published compositional data, such as fat (F), protein, total solids (TS), solid non-fat matter (SNF), lactose (Lac) and ash. The DPMs were developed, selected and tested using a linear regression approach, as a meta-analysis (i.e. meta-regression) was not applicable. However, in the final stage, a control procedure for spurious findings was carried out using a Monte Carlo permutation test. Because several published predictive models (PPMs) for GE in cow milk and goat milk were found in the literature, they were tested on the same data set with which the DPMs were developed. The best-performing DPMs and PPMs were compared directly with a subset of the individual data retrieved from the literature. Overall, the paucity of direct measurements of the GE in goat milk was a limiting factor in collecting data from the literature; thus, only a small data set (n=26) was established, even though it was considered sufficiently representative of milks from different goat breeds. The three best PPMs based on F alone gave more biased estimates of the GE content of the goat milk than the three new DPMs based on F, F and SNF and F and TS, respectively. Accordingly, three different formulations of FU are proposed, depending on the availability of data including both F and TS (or F and SNF) or F alone. Even though several metrics can be used in defining the FU for milk to

  19. Application of Fast Neutron Activation to Determinate of N, P and K Element Contents in the Sludge

    International Nuclear Information System (INIS)

    Supriyatni E; Yazid M; Nuraini E; Sunardi

    2003-01-01

    The application of fast neutron activation to determinate of N, P and K element contents in the sludge has been performed. The aim of this research is to determine the content of N, P and K elements in the sludge for the possibility of reuse as organic fertilizer. Sludge sample was taken from waste water retainer at Bantul Waste Water Treatment Plant. The sample was dried and ground, then irradiated using 14.7 MeV fast neutron from neutron generator. Result was qualitatively and quantitatively analyses using gamma spectrometer. The result showed that the sludge contains N with energy 511 keV, P with energy 1778 keV and K with energy 1273 keV. The concentration of N is (4.101 ± 0.007) mg/g, P is = (640.510 ± 14.34) mg/g and K = (3.045 ± 0.064) mg/g. (author)

  20. Effects of Crab Cavities' Multipole Content in an Electron-Ion Collider

    International Nuclear Information System (INIS)

    Satogata, Todd J.; Morozov, Vasiliy; Delayen, Jean R.; Castillo, Alejandro

    2015-09-01

    The impact on the beam dynamics of the Medium Energy Electron-Ion Colider (MEIC) due to the multipole content of the 750 MHz crab cavity was studied using thin multipole elements for 6D phase space particle tracking in ELEGANT. Target values of the sextupole component for the cavity's field expansion were used to perform preliminary studies on the proton beam stability when compared to the case of pure dipole content of the rf kicks. Finally, important effects on the beam sizes due to non-linear components of the crab cavities' fields were identified, and some criteria for their future study were proposed.

  1. Effects of Crab Cavities' Multipole Content in an Electron-Ion Collider

    Energy Technology Data Exchange (ETDEWEB)

    Satogata, Todd J. [Jefferson Lab., Newport News, VA (United States); Morozov, Vasiliy [Jefferson Lab., Newport News, VA (United States); Delayen, Jean R. [Old Dominion Univ., Norfolk, VA (United States); Jefferson Lab., Newport News, VA (United States); Castillo, Alejandro [Old Dominion Univ., Norfolk, VA (United States)

    2015-09-01

    The impact on the beam dynamics of the Medium Energy Electron-Ion Colider (MEIC) due to the multipole content of the 750 MHz crab cavity was studied using thin multipole elements for 6D phase space particle tracking in ELEGANT. Target values of the sextupole component for the cavity’s field expansion were used to perform preliminary studies on the proton beam stability when compared to the case of pure dipole content of the rf kicks. Finally, important effects on the beam sizes due to non-linear components of the crab cavities’ fields were identified, and some criteria for their future study were proposed.

  2. Report of international symposium on the 22nd Japan annual nuclear energy meeting, PNC general meeting and business report about nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-04-15

    This conference report consists of three parts, which report the 22nd annual nuclear energy meeting in Japan, including the list of Korean delegates, program and the contents of five session, the conference report for PNC general meeting and the report on international symposium for fruition of nuclear power business. It introduces the main conception and the contents of the symposium.

  3. The French market of solutions for active energy efficiency. Energy, central home automation systems, consumption monitoring software, distributed load shedding, energy performance contract... which tools will stand out?

    International Nuclear Information System (INIS)

    2012-12-01

    This article presents the content of a market study which aimed at proposing an overview of solutions for energy efficiency and at assessing their impact on energy consumption, at identifying the growth dynamics of three market segments (assisted efficiency, automated efficiency and contract-based efficiency), at comparing the posture and strategies of the different actors present on this market (energy providers, equipment manufacturers, pure players, NTIC...), at identifying actors who are in the best position to benefit market development, and at imagining tomorrow's supply for energy efficiency. The report addresses the definition of active energy efficiency, the rationale of its development, the European regulatory and legal context, the strengthening of regulatory and environmental constraints in France, the three different market segments (examples, opportunities), and the competition context

  4. Primary investigation of a design for a dual energy gamma-ray transmission gauge to determine the ash content of coal on a conveyor belt

    International Nuclear Information System (INIS)

    Abedinzadeh, A.; Rahimi, H.; Rahimi, N.; Amini, A.; Naimpour, A.; Moafian, J.

    1993-01-01

    In order to design a dual energy γ-ray transmission gauge for measuring, on-line, the ash content of coal, an investigation was carried out to determine the relation between the theoretical mass absorption coefficient (μ-bar) and the % ash of coal in the Kerman District Coal Mines. Because coal, transported on a conveyor belt, may be a non-homogeneous mixture from one or more mines, it was decided to compare % ash in a mixture of coals from several mines with that from individual mines, the measurements being made whilst the coal was being transported on a conveyor belt. The investigation shows that the relation between the mass absorption coefficient and the % ash in a coal mixture from several mines cannot be used to assess, accurately, the value of μ-bar for coals from individual mines in this particular region. (author)

  5. Photoluminescence properties of cerium oxide nanoparticles as a function of lanthanum content

    Energy Technology Data Exchange (ETDEWEB)

    Deus, R.C. [Universidade Estadual Paulista, Unesp —Faculdade de Engenharia de Guaratinguetá, Av. Dr Ariberto Pereira da Cunha 333, Bairro Pedregulho, P.O. Box 355, 12.516-410 Guaratinguetá, São Paulo, Brazil, (Brazil); Cortés, J.A., E-mail: leandrosrr89@gmail.com [Universidade Estadual Paulista, Unesp —Faculdade de Engenharia de Guaratinguetá, Av. Dr Ariberto Pereira da Cunha 333, Bairro Pedregulho, P.O. Box 355, 12.516-410 Guaratinguetá, São Paulo, Brazil, (Brazil); Ramirez, M.A. [Universidade Estadual Paulista, Unesp —Faculdade de Engenharia de Guaratinguetá, Av. Dr Ariberto Pereira da Cunha 333, Bairro Pedregulho, P.O. Box 355, 12.516-410 Guaratinguetá, São Paulo, Brazil, (Brazil); Ponce, M.A. [Instituto de Investigaciones en Ciencia y Tecnología de Materiales (INTEMA) (CONICET-Universidad Nacional de Mar del Plata), Juan B. Justo 4302, 7600 Mar del Plata (Argentina); Andres, J. [Laboratório Interdisciplinar em Cerâmica, Instituto de Química, Universidade Estadual Paulista, P.O. Box 355, 14801-907 Araraquara, São Paulo (Brazil); Rocha, L.S.R. [Universidade Estadual Paulista, Unesp —Faculdade de Engenharia de Guaratinguetá, Av. Dr Ariberto Pereira da Cunha 333, Bairro Pedregulho, P.O. Box 355, 12.516-410 Guaratinguetá, São Paulo, Brazil, (Brazil); and others

    2015-10-15

    Highlights: • CeO{sub 2} nanoparticles were obtained by microwave-hydrothermal method. • Rietveld refinement reveals a cubic structure. • KOH mineralizer agent exhibit weak agglomeration at low temperature and shorter time. - Abstract: The structural and photoluminescent properties at room temperature of CeO{sub 2} and La-doped CeO{sub 2} particles were undertaken. The obtained particles were synthesized by a microwave-assisted hydrothermal method (MAH) under different lanthanum contents. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Fourier transform Raman (FT-Raman), Ultra-violet spectroscopy (UV–vis) and photoluminescence (PL) measurements were carried out. XRD revealed that the powders are free of secondary phases and crystallize in the cubic structure. Raman data show that increasing La doping content increase oxygen vacancies due to lattice expansion. The UV/vis absorption spectroscopy suggested the presence of intermediate energy levels in the band gap of structurally ordered powders. Lanthanum addition creates oxygen vacancies and shifts the photoluminescence in the low energy range leading to intense PL emission.

  6. Methylxanthine Content in Commonly Consumed Foods in Spain and Determination of Its Intake during Consumption

    Directory of Open Access Journals (Sweden)

    Juan M. Sanchez

    2017-12-01

    Full Text Available Methylxanthines present psychostimulant effects. These compounds have low toxicity and their consumption at moderate levels presents some beneficial health effects, whereas some significant risk appears at high levels. Samples of common types of methylxanthine-containing beverages and foods consumed in Spain were analyzed to determine their content. Caffeine was the methylxanthine that was most found in the samples investigated. Instant coffees gave the highest caffeine percentage (18–44 mg·g−1. Green and scented teas were found to have a caffeine dry-weight content (8–26 mg·g−1 equivalent to ground coffees (13–23 mg·g−1, but black and pu-erh teas (18–30 mg·g−1 had a higher caffeine content. The evaluation of the most conventional methods for preparing espresso coffees showed that an espresso contains between 88–116 mg of caffeine. In the case of tea beverages, the amount of caffeine present was 2–3 times smaller than in espresso coffees. Energy drinks showed a similar caffeine content (80–106 mg as espresso coffees. Chocolates had the lowest caffeine content. It has been found that none of the foods evaluated reach the recommended daily intake limit of 400 mg of caffeine with a single dose. This limit can be reached with 4–5 doses in the case of coffees and energy drinks. In the case of chocolates, the methylxanthine compound detected at large levels was theobromine, with amounts ranging from 4 to 10 mg·g−1 for dark chocolates.

  7. Consumers' estimation of calorie content at fast food restaurants: cross sectional observational study.

    Science.gov (United States)

    Block, Jason P; Condon, Suzanne K; Kleinman, Ken; Mullen, Jewel; Linakis, Stephanie; Rifas-Shiman, Sheryl; Gillman, Matthew W

    2013-05-23

    To investigate estimation of calorie (energy) content of meals from fast food restaurants in adults, adolescents, and school age children. Cross sectional study of repeated visits to fast food restaurant chains. 89 fast food restaurants in four cities in New England, United States: McDonald's, Burger King, Subway, Wendy's, KFC, Dunkin' Donuts. 1877 adults and 330 school age children visiting restaurants at dinnertime (evening meal) in 2010 and 2011; 1178 adolescents visiting restaurants after school or at lunchtime in 2010 and 2011. Estimated calorie content of purchased meals. Among adults, adolescents, and school age children, the mean actual calorie content of meals was 836 calories (SD 465), 756 calories (SD 455), and 733 calories (SD 359), respectively. A calorie is equivalent to 4.18 kJ. Compared with the actual figures, participants underestimated calorie content by means of 175 calories (95% confidence interval 145 to 205), 259 calories (227 to 291), and 175 calories (108 to 242), respectively. In multivariable linear regression models, underestimation of calorie content increased substantially as the actual meal calorie content increased. Adults and adolescents eating at Subway estimated 20% and 25% lower calorie content than McDonald's diners (relative change 0.80, 95% confidence interval 0.66 to 0.96; 0.75, 0.57 to 0.99). People eating at fast food restaurants underestimate the calorie content of meals, especially large meals. Education of consumers through calorie menu labeling and other outreach efforts might reduce the large degree of underestimation.

  8. Cooperative relay-based multicasting for energy and delay minimization

    KAUST Repository

    Atat, Rachad

    2012-08-01

    Relay-based multicasting for the purpose of cooperative content distribution is studied. Optimized relay selection is performed with the objective of minimizing the energy consumption or the content distribution delay within a cluster of cooperating mobiles. Two schemes are investigated. The first consists of the BS sending the data only to the relay, and the second scheme considers the scenario of threshold-based multicasting by the BS, where a relay is selected to transmit the data to the mobiles that were not able to receive the multicast data. Both schemes show significant superiority compared to the non-cooperative scenarios, in terms of energy consumption and delay reduction. © 2012 IEEE.

  9. Rapid analysis of molybdenum contents in molybdenum master alloys by X-ray fluorescence technique

    International Nuclear Information System (INIS)

    Tongkong, P.

    1985-01-01

    Determination of molybdenum contents in molybdenum master alloy had been performed using energy dispersive x-ray fluorescence (EDX) technique where analysis were made via standard additions and calibration curves. Comparison of EDX technique with other analyzing techniques, i.e., wavelength dispersive x-ray fluorescence, neutron activation analysis and inductive coupled plasma spectrometry, showed consistency in the results. This technique was found to yield reliable results when molybdenum contents in master alloys were in the range of 13 to 50 percent using HPGe detector or proportional counter. When the required error was set at 1%, the minimum analyzing time was found to be 30 and 60 seconds for Fe-Mo master alloys with molybdenum content of 13.54 and 49.09 percent respectively. For Al-Mo master alloys, the minimum times required were 120 and 300 seconds with molybdenum content of 15.22 and 47.26 percent respectively

  10. Wind power today: 1999 Wind Energy program highlights

    Energy Technology Data Exchange (ETDEWEB)

    Weis-Taylor, Pat

    2000-04-06

    Wind Power Today is an annual publication that provides an overview for the Department of Energy's Wind Energy Program. The purpose of Wind Power Today is to show how DOE's Wind Energy Program supports wind turbine research and deployment in hopes of furthering the advancement of wind technologies that produce clean, low-cost, reliable energy for the 21st century. Content objectives include: Educate readers about the advantages and potential for widespread deployment of wind energy; explain DOE wind energy program objectives and goals; describe program accomplishments in research and application; examine the barriers to widespread deployment; describe benefits of continued research and development; facilitate technology transfer; attract cooperative wind energy projects with industry.

  11. Waste utilization in electric energy industry

    International Nuclear Information System (INIS)

    Parate, N.S.; Harris, E.

    1991-01-01

    This paper reports that electric energy is an integral element of today's economy and the standard quality of life. The availability of energy at an affordable cost has always been of basic concern because of the intimate relationship of energy to our societal development and progress. Coal and Uranium are the primary alternative energy sources for large electric power plants. Coal remains the dominant fuel for electric generation. The pressurized fluidized bed combustion technology has the potential of utilizing all types of coal, including coal with high ash, high sulphur, and high moisture content. Fluidized bed combustion is a firing technique which fulfills today's pollution control requirements without downstream flue gas cleaning plants like scrubbers, baghouses, and precipitators

  12. Long term energy-related environmental issues of copper production

    International Nuclear Information System (INIS)

    Alvarado, S.; Maldonado, P.; Barrios, A.; Jaques, I.

    2002-01-01

    Primary copper production is a major activity in the mining sector of several countries. However, it is highly energy-intensive and poses important environmental hazards. In the case of Chile, the world's largest copper producer (40% of world total), we examine its energy consumption and energy-related environmental implications over a time horizon of 25 years. Concerning the latter, we focus on greenhouse-gas (GHG) emissions, one of the most debated environmental issues. This paper follows up our previous report in which the current situation was analyzed and a particular technical option for improving the energy efficiency and concurrently reducing GHG emissions was discussed. Estimated reference or base (BS) and mitigation (MS) scenarios are developed for the period ending in 2020. The former assesses the energy demand projected in accordance with production forecasts and specific energy consumption patterns (assuming that energy efficiency measures are adopted 'spontaneously') with their resultant GHG emissions, while the latter assumes induced actions intended to reduce emissions by adopting an aggressive policy of efficient energy use. For the year 2020, the main results are: (i) BS, 1214 t of CO 2 /ton of refined copper content (49% lower than in 1994); (ii) MS, 1037 t of CO 2 /t of refined copper content (56% lower than in 1994). CO 2 emissions have been estimated considering both fuel and electricity process requirements. (author)

  13. Sharing of Alcohol-Related Content on Social Networking Sites: Frequency, Content, and Correlates.

    Science.gov (United States)

    Erevik, Eilin K; Torsheim, Torbjørn; Vedaa, Øystein; Andreassen, Cecilie S; Pallesen, Ståle

    2017-05-01

    The present study aimed to explore students' reports of their sharing of alcohol-related content on different social networking sites (i.e., frequency of sharing and connotations of alcohol-related posts), and to identify indicators of such posting. Students at the four largest institutions for higher education in Bergen, Norway, were invited to participate in an Internet-based survey. The sample size was 11,236 (a 39.4% response rate). The survey included questions about disclosure of alcohol-related content on social networking sites, alcohol use (using the Alcohol Use Disorders Identification Test), personality factors (using the Mini-IPIP), and demographic characteristics. Binary logistic regressions were used to analyze indicators of frequent sharing of alcohol-related content depicting positive and negative aspects of alcohol use. A majority of the students had posted alcohol-related content (71.0%), although few reported having done so frequently. Positive aspects of alcohol use (e.g., enjoyment or social community) were most frequently shared. Young, single, and extroverted students with high alcohol consumption were more likely to report frequent sharing of alcohol-related content. Positive attitudes toward posting alcohol-related content and reports of exposure to such content particularly increased the likelihood of one's own posting of alcohol-related content. Positive aspects of alcohol use seem to be emphasized on social networking sites. Sharing of alcohol-related content is associated with heightened alcohol use, which implies that such sites can be relevant for prevention agents. Social influence from social networking sites, such as exposure to others' alcohol-related content, is associated with one's own sharing of similar content.

  14. Effects of exogenous phytase and xylanase, individually or in combination, and pelleting on nutrient digestibility, available energy content of wheat and performance of growing pigs fed wheat-based diets.

    Science.gov (United States)

    Yang, Y Y; Fan, Y F; Cao, Y H; Guo, P P; Dong, B; Ma, Y X

    2017-01-01

    Two experiments were conducted to determine the effects of adding exogenous phytase and xylanase, individually or in combination, as well as pelleting on nutrient digestibility, available energy content of wheat and the performance of growing pigs fed wheat-based diets. In Experiment 1, forty-eight barrows with an initial body weight of 35.9±0.6 kg were randomly assigned to a 2×4 factorial experiment with the main effects being feed form (pellet vs meal) and enzyme supplementation (none, 10,000 U/kg phytase, 4,000 U/kg xylanase or 10,000 U/kg phytase plus 4,000 U/kg xylanase). The basal diet contained 97.8% wheat. Pigs were placed in metabolic cages for a 7-d adaptation period followed by a 5-d total collection of feces and urine. Nutrient digestibility and available energy content were determined. Experiment 2 was conducted to evaluate the effects of pelleting and enzymes on performance of wheat for growing pigs. In this experiment, 180 growing pigs (35.2±9.0 kg BW) were allocated to 1 of 6 treatments according to a 2×3 factorial treatment arrangement with the main effects being feed form (meal vs pellet) and enzyme supplementation (0, 2,500 or 5,000 U/kg xylanase). In Experiment 1, there were no interactions between feed form and enzyme supplementation. Pelleting reduced the digestibility of acid detergent fiber (ADF) by 6.4 percentage units (pdigestibility of energy by 0.6 percentage units (pdigestibility of crude protein by 0.5 percentage units (p = 0.07) compared with diets in mash form. The addition of phytase improved the digestibility of phosphorus (pdigestibility of crude protein by 1.0 percentage units (p = 0.09) and increased the digestibility of neutral detergent fiber (NDF) (pdigestibility of phosphorus (pdigestibility (pdigestibility but decreased ADF digestibility. Adding xylanase increased crude protein digestibility and pig performance. Phytase increased the apparent total tract digestibility of phosphorus and calcium. The combination of

  15. A Project-Based, STEM-Integrated Alternative Energy Team Challenge for Teachers

    Science.gov (United States)

    Felix, Allison; Harris, John

    2010-01-01

    The topic of alternative energy is not only relevant to a multitude of issues today, it is also an effective vehicle for developing instruction that applies across a variety of content disciplines and academic standards. Since many of the issues associated with alternative energy are open-ended, alternative energy also lends itself to…

  16. Qualitative Content Analysis

    OpenAIRE

    Philipp Mayring

    2000-01-01

    The article describes an approach of systematic, rule guided qualitative text analysis, which tries to preserve some methodological strengths of quantitative content analysis and widen them to a concept of qualitative procedure. First the development of content analysis is delineated and the basic principles are explained (units of analysis, step models, working with categories, validity and reliability). Then the central procedures of qualitative content analysis, inductive development of ca...

  17. An Examination of the Entertainment Industry's Efforts To Curb Children's Exposure to Violent Content. Hearing before the Subcommittee on Telecommunications and the Internet of the Committee on Energy and Commerce. House of Representatives, One Hundred Seventh Congress, First Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Committee on Energy and Commerce.

    This hearing's transcripts compile testimony given before the Subcommittee on Telecommunications and the Internet of the Committee on Energy and Commerce on the entertainment industry's efforts to curb children's exposure to violent content, especially those of the music industry. The hearing began with statements from the chairman of the…

  18. Energy and macronutrient content of familiar beverages interact with pre-meal intervals to determine later food intake, appetite and glycemic response in young adults.

    Science.gov (United States)

    Panahi, Shirin; Luhovyy, Bohdan L; Liu, Ting Ting; Akhavan, Tina; El Khoury, Dalia; Goff, H Douglas; Harvey Anderson, G

    2013-01-01

    The objective was to compare the effects of pre-meal consumption of familiar beverages on appetite, food intake, and glycemic response in healthy young adults. Two short-term experiments compared the effect of consumption at 30 (experiment 1) or 120 min (experiment 2) before a pizza meal of isovolumetric amounts (500 mL) of water (0 kcal), soy beverage (200 kcal), 2% milk (260 kcal), 1% chocolate milk (340 kcal), orange juice (229 kcal) and cow's milk-based infant formula (368 kcal) on food intake and subjective appetite and blood glucose before and after a meal. Pre-meal ingestion of chocolate milk and infant formula reduced food intake compared to water at 30 min, however, beverage type did not affect food intake at 2h. Pre-meal blood glucose was higher after chocolate milk than other caloric beverages from 0 to 30 min (experiment 1), and after chocolate milk and orange juice from 0 to 120 min (experiment 2). Only milk reduced post-meal blood glucose in both experiments, suggesting that its effects were independent of meal-time energy intake. Combined pre- and post-meal blood glucose was lower after milk compared to chocolate milk and orange juice, but did not differ from other beverages. Thus, beverage calorie content and inter-meal intervals are primary determinants of food intake in the short-term, but macronutrient composition, especially protein content and composition, may play the greater role in glycemic control. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Wetlands as energy-dissipating systems

    Czech Academy of Sciences Publication Activity Database

    Pokorný, J.; Květ, Jan; Rejšková, A.; Brom, J.

    2010-01-01

    Roč. 37, č. 12 (2010), s. 1299-1305 ISSN 1367-5435 Institutional research plan: CEZ:AV0Z60870520 Keywords : wetlands * vegetation * energy fluxes * primary production * landscape management Subject RIV: EF - Botanics Impact factor: 2.416, year: 2010 http://www.springerlink.com/content/y5t4750647q84553/

  20. Energy analyses and drying kinetics of chamomile leaves in microwave-convective dryer

    Directory of Open Access Journals (Sweden)

    Ali Motevali

    2016-06-01

    Full Text Available Drying characteristics and energy aspects as well as mathematical modeling of thin layer drying kinetics of chamomile in a microwave-convective dryer are reported in this article. Drying experiments were carried out at 8 microwave power levels (200–900 W, air temperature of 50 °C, and air velocity of 0.5 m/s. Increasing the microwave output power from 200 to 900 W, decreased the drying time from 40 to 10 min. The drying process took place in the falling rate period. The Midilli et al. model showed the best fit to the experimental drying data. Moisture diffusivity values increase with decreasing moisture content down to 1.70 (kg water kg−1 dry matter but decrease with a further decrease in moisture content from 1.72 to 0.96 (kg water kg−1 dry matter. The average values of Deff increased with microwave power from 5.46 to 39.63 × 10−8 (m2 s−1. Energy consumption increased and energy efficiency decreased with moisture content of chamomile samples. Average specific energy consumption, energy efficiency and energy loss varied in the range 18.93–28.15 MJ kg−1 water, 8.25–13.07% and 16.79–26.01 MJ kg−1 water, respectively, while the best energy results were obtained at 400 W, 50 °C and 0.5 m s−1.