WorldWideScience

Sample records for energy conservation study

  1. Energy prices and the promotion of energy conservation. A background study for energy conservation programme

    International Nuclear Information System (INIS)

    1994-01-01

    The prices of fuels in the international markets affect the development of consumer prices of energy in Finland. In the near future no factors can be foreseen, which would cause major increases in the prices of oil, coal or gas. It can thus not be expected that increased fuel prices would motivate more efficient energy conservation. In international comparison, consumer prices of energy have been relatively low in Finland. This applies especially to electricity. After the removal of price controls, energy prices have been determined by the markets. The influence of the public authorities in energy pricing is put into effect through taxation. The price of energy has a fairly small effect on energy consumption in a short term, but longer term effects are more significant. Energy products are faxed in all western countries. (orig.)

  2. Intercity passenger transportation: energy efficiency and conservation case study

    Energy Technology Data Exchange (ETDEWEB)

    Khan, A.M.

    1981-01-01

    To demonstrate a methodology for energy analysis and to advance technical knowledge on the energy conservation potential in intercity passenger transportation, this paper reports findings of a case study of the Toronto-Ottawa-Montreal multimodal system. From a total (direct and indirect) energy perspective for origin-destination travel, energy efficiency and conservation potential of technological improvements, modal shifts and increased load factors are reported. 11 refs.

  3. Economics of Energy Conservation: A Case Study

    OpenAIRE

    Gunatilake, Herath; Padmakanthi, Dhammika

    2008-01-01

    Global energy security relies heavily on exhaustible fossil fuels, whose use contributes significantly to global environmental problems. The recent unprecedented rise in oil prices and the threat of global warming highlight the urgent need for solutions to the energy and environment problem. Shifting to clean renewable energy sources - the long-term solution - has been slow despite efforts of the global community since the 1970s. Demand side management (DSM) is part of the solution to the ene...

  4. Energy conserving site design case study: Shenandoah, Georgia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

  5. Report on energy conservation. Potential feasibility study on energy conservation at the national textile factories (Energy-saving equipment)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In consideration of the future CDM project, feasibility study was made on the energy conservation/cost reduction in national textile factories in Egypt. In textile factories in Egypt, the steam by oil fueled boiler is used in dyeing, drying and other production processes. In this study, studied were the energy conservation effect, greenhouse effect gas reduction effect and economical efficiency in the case of using electric power/steam by the natural gas fueled cogeneration system. As a result of the study, the energy conservation effect in 6 national textile factories became 13% on average, which equals to the conservation of 15,000 toe per year. The greenhouse effect gas reduction effect also became 13%, which equals to the reduction of approximately 46,000 t-CO2 per year. As to the economical efficiency, the depreciation period of investment became 4.0-8.6 years (5.6 years on average). In the light of the operation period of cogeneration facilities of 15 years, it was indicated that the system was very advantageous. (NEDO)

  6. Policy study: energy conservation in transportation in Puerto Rico

    Energy Technology Data Exchange (ETDEWEB)

    Mayda, J

    1978-09-01

    The present study is an initial effort to apply social system analysis to transportation energy conservation, in order to prepare the ground for a team effort of transportation and energy specialists, regional planners, policy analysis and generalists, and government administrators - with additional imputs from commerce, industry and the community at large. The task of this study has been to inventory the principal factors and inputs in the field of transportation energy demand and possible conservation, estimate their magnitudes and relations, and arrange in a tentative but reasoned pattern - where there were before only so many scattered data, technical studies with a limited focus, sectoral programs and decisions, and vague impressions about the serviceability, the impacts and the social value of the product.

  7. Feasibility study of energy conservation at Vietnam Steel Corporation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Feasibility study was conducted of the project for energy conservation and reduction in greenhouse effect gas emission by introducing the honeycomb type heat storage burner technology to heating furnaces of Vietnam Steel Corporation (VSC). Furnaces for study are the bar mill furnace at Gia Sang plant of TISCO Steelorks, bar mill furnace at Thu Duc plant of SSC Steelworks, billet furnace at new bar mill of SSC Steelworks, slab furnace at new hot strip mill that VSC is now in the planning stage. As a result of the study, the energy conservation amount is 2,900 toe/y at TISCO Steelworks, 2,130 toe/y at SSC Steelworks, and 6,000 toe/y at VSC new hot strip mill, which totaled 11,030 toe/y. The amount of greenhouse effect gas reduction is 9,000 t-CO2/y at TISCO, 6,600 t-CO2/y at SSC, and 18,600 t-CO2/y at VSC, which totaled 34,200 t/y. The total investment amount is 0.23, 0.44, 1.32 and 1.99 billion yen for each. As to the profitability, the internal earning rate is 24%, 86%, 97% and 51% for each, which are all favorable. (NEDO)

  8. Handbook on energy conservation

    International Nuclear Information System (INIS)

    1989-12-01

    This book shows energy situation in recent years, which includes reserves of energy resource in the world, crude oil production records in OPEC and non OPEC, supply and demand of energy in important developed countries, prospect of supply and demand of energy and current situation of energy conservation in developed countries. It also deals with energy situation in Korea reporting natural resources status, energy conservation policy, measurement for alternative energy, energy management of Korea, investment in equipment and public education for energy conservation.

  9. Energy conservation in coal conversion. Final report, September 15, 1977--September 1, 1978. Selected case studies and conservation methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Purcupile, J.C.

    1978-09-01

    The purpose of this study is to apply the methodologies developed in the Energy Conservation in Coal Conversion August, 1977 Progress Report - Contract No. EY77S024196 - to an energy efficient, near-term coal conversion process design, and to develop additional, general techniques for studying energy conservation and utilization in coal conversion processes. The process selected for study was the Ralph M. Parsons Company of Pasadena, California ''Oil/Gas Complex, Conceptual Design/Economic Analysis'' as described in R and D Report No. 114 - Interim Report No. 4, published March, 1977, ERDA Contract No. E(49-18)-1975. Thirteen papers representing possible alternative methods of energy conservation or waste heat utilization have been entered individually into EDB and ERA. (LTN)

  10. A review of intervention studies aimed at household energy conservation

    NARCIS (Netherlands)

    Abrahamse, W; Steg, L; Vlek, C; Rothengatter, T; Rothengatter, J.A.

    This article reviews and evaluates the effectiveness of interventions aiming to encourage households to reduce energy consumption. Thirty-eight studies performed within the field of (applied) social and environmental psychology are reviewed, and categorized as involving either antecedent strategies

  11. Consumer behavior and energy conservation. A policy-oriented field experimental study on the effectiveness of behavioral interventions promoting residential energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Ester, P

    1984-01-01

    The primary goal of this study is to investigate the effectiveness of behavioral interventions aimed at promoting energy conservation by consumers. It is argued that energy conservation has many advantages over other energy policy options, especially with respect to sociopolitical, economic, technical, safety and environmental considerations. Theories are discussed which deal with micromotives behind individual energy consumption and their macroconsequences. Antecedent and consequence behavioral interventions (information/education, prompting, modeling, feedback, self-monitoring, reinforcement/punishment) for promoting energy conservation by consumers are analyzed, and an extensive review is presented of behavioral experiments conducted in this area. Discussed is how the field experiment, which was conducted in five cities in the Netherlands with appr. 400 subjects, has been implemented. Hypotheses are tested regarding belief structures with respect to energy conservation. Provided are data about the absolute and relative effectiveness of energy conservation information, biweekly and monthly feedback, and self-monitoring in encouraging consumers to conserve energy. Hypotheses are tested about cognitive aspects related to responsiveness to behavioral interventions and attitude change toward energy conservation. Conclusions are presented and some energy policy recommendations and directions for future research are formulated. (J.C.R.)

  12. Japan's energy conservation policy

    International Nuclear Information System (INIS)

    Yoda, Kenichi

    1990-01-01

    This article reviews developments in Japanese energy conservation since the 1970s. The industrial sector has achieved the greatest success, due to industrial restructuring as well as improvements in energy efficiency. In the residential/commercial sector, the efficiency of appliances has been much improved. Although improvements have been made in the fuel efficiency of passenger cars, energy consumption in the transportation sector has risen slightly owing to increased transport of passengers and freight. The overall responsibility for energy conservation policy rests with the Ministry of International Trade and Industry. MITI is also responsible for implementing specific conservation policies in regard to the industrial and commercial sectors. In the residential sector, MITI works with the Ministry of Construction and in the transportation sector with the Ministry of Transport. To realize the goals of energy conservation policy through general research, dissemination of public information and other activities, MITI works with the Energy Conservation Center (ECC). (author). 2 figs, 3 tabs

  13. Case studies in residual use and energy conservation at wastewater treatment plants

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, D. [Science Applications International Corp., Los Altos, CA (United States)

    1995-06-01

    The US Environmental Protection Agency (EPA) and the National Renewable Energy Laboratory (NREL) for the US Department of Energy (DOE) funded a study to document energy conservation activities and their effects on operation costs, regulatory compliance, and process optimization at several wastewater treatment plants (WWTPS). The purpose of this report is to review the efforts of wastewater treatment Facilities that use residuals as fuels. Case histories are presented for facilities that have taken measures to reduce energy consumption during wastewater treatment. Most of the WWTPs discussed in this report have retrofitted existing facilities to achieve energy conservation. The case studies of energy conservation measures found no effects on the facilities` ability to comply with NPDES permits. Indeed, energy conservation activities enhance environmental compliance in several ways.

  14. Conservation vs. renewable energy: Cases studies from Hawaii

    International Nuclear Information System (INIS)

    Yalcintas, Melek; Kaya, Abidin

    2009-01-01

    State of Hawaii generates about 90 percent of its electricity from imported fossil fuel sources. Thus, there is pressure from both public and policy makers to reduce the State dependency on foreign fossil fuel sources. To this extend, there are incentives created at State and Federal level for both residential and commercial buildings to install photovoltaic (PV) systems. Although such incentives are necessary for long-term objectives, it is shown in this study that retrofitting inefficient old building-equipment is another viable source to reduce the State of Hawaii's electricity demand. Four case studies are presented to illustrate that building-equipment retrofitting is a viable and necessary tool for increasing the energy efficiency of buildings. Each case study presents an equipment retrofit project electricity savings with its payback periods, and compares with equivalent electricity capacity and economics PV systems in Honolulu, Hawaii. The case studies show that energy savings from retrofit projects ranged from 28% to 61% for individual equipment retrofits. These results indicate that equipment retrofitting with energy-efficient alternatives is about 50% or more cost-effective than installing PV systems. This is so even when large renewable energy tax incentives provided by the Federal and State Governments are taken into account.

  15. Tuna cannery energy conservation interventions: Technical/economic feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Florio, G. (Calabria Univ. Arcavacata di Rende (Italy). Dipt. di Meccanica)

    An energy audit was conducted on a 230,000 can (x 80 g)/day tuna cannery to determine where technically and economically feasible energy savings interventions could be made. The plant is equipped with an oil fired boiler which supplies steam for cooking and sterilization purposes. In the energy/cost analysis, it was found that the most significant and cost effective energy savings could be obtained by the substitution of the four sterilization chambers with three sets of twin sterilization/heat exchange chambers.

  16. Energy conservation in industry

    International Nuclear Information System (INIS)

    Pembleton, P.

    1992-01-01

    Energy Conservation in Industry is the first number in the Energy and Environmental Series of the Industrial and Technological Information Bank (INTIB). The Series supersedes the INECA Journal and reflects the broader information programme undertaken by INTIB. The present number of the Series contains contributions from three major international databases and five topic-specific sources, including three United Nations Organizations. The present publication consists of a recent technical report on a current topic: reducing energy loss in four industrial sectors and improving energy conservation through waste-heat recovery, followed by two sections containing abstracts of technical materials

  17. Lessons for integrated household energy conservation policies from an intervention study in Singapore

    International Nuclear Information System (INIS)

    Kua, H.W.; Wong, S.E.

    2012-01-01

    In preparation for a community energy conservation program in the southwest district of Singapore, a pilot intervention study was conducted between August and November 2008 to study the effectiveness of tailored information and feedback in promoting household conservation. A sample of 125 households was involved in the study, of which 63 were the control group. Both self-reported behavioral changes and actual energy reductions were measured and any Hawthorne effect was identified. It was found that self-reported behavioral changes were strongly correlated to the level of trust in the energy conservation information given, the need for ease in practicing the recommended conservation measures and feeling of satisfaction in executing the measures; these results differ from several past studies on energy interventions. 60.7% of those who reported behavioral changes actually reduced energy consumption. Reasons were found and discussed. Lessons from this intervention study can be applied to design integrated policies aimed at promoting energy conservation in households. - Highlights: ► Energy intervention was implemented on 125 households. ► Outreach instruments included stickers, pamphlets and counseling. ► Self-reported behavioral and actual reductions were recorded. ► Self-reported behavioral change was only correlated to trust of information given. ► It was also correlated to ease of actions and feeling of satisfaction from actions.

  18. Energy audit for energy conservation

    International Nuclear Information System (INIS)

    Kanetkar, V.V.

    1996-01-01

    Energy audit is a very effective management tool for betterment of plant performance. The energy audit has a problem solving approach rather than a fault finding technique. The energy conservation is a rational use of energy. It has been the experience of the developed countries that energy is one issue which results into cost savings with relatively much less efforts/cost in comparison with other resources used in production, development and adoption of energy efficiency equipment and practices in most of production process has been the result of same technique. (author). 1 tab

  19. Promoting household energy conservation

    International Nuclear Information System (INIS)

    Steg, Linda

    2008-01-01

    It is commonly assumed that households must change their behaviour to reduce the problems caused by increasing levels of fossil energy use. Strategies for behaviour change will be more effective if they target the most important causes of the behaviour in question. Therefore, this paper first discusses the factors influencing household energy use. Three barriers to fossil fuel energy conservation are discussed: insufficient knowledge of effective ways to reduce household energy use, the low priority and high costs of energy savings, and the lack of feasible alternatives. Next, the paper elaborates on the effectiveness and acceptability of strategies aimed to promote household energy savings. Informational strategies aimed at changing individuals' knowledge, perceptions, cognitions, motivations and norms, as well as structural strategies aimed at changing the context in which decisions are made, are discussed. This paper focuses on the psychological literature on household energy conservation, which mostly examined the effects of informational strategies. Finally, this paper lists important topics for future research

  20. Reaching people with energy conservation information: four statewide residential case studies

    Energy Technology Data Exchange (ETDEWEB)

    Peelle, E.; Braid, R.B.; Jones, D.W.; Reed, J.H.

    1983-09-01

    Four state residential energy conservation programs are reviewed in terms of their origins, evolutions, purposes and goals, administration, organization, and outcomes. The four programs chosen were selected from among 30 nominated by state energy offices and regional Department of Energy personnel as being illustrative in terms of organization and/or outcomes. While intended primarily for state-level program managers and staff, the profiles of programs, conclusions, and recommendations should be useful to anyone interested in developing viable, action-oriented conservation programs. The four case studies included Oregon's Master Conserver program, Oklahoma's energy education project for low-income and elderly families, Virginia's workshops for heating dealers service and contractors, and Maine's three energy education projects - the Energy Bus, Energy Conservation Month, and the Home Energy Check-up. All four programs utilized Energy Extension Service (EES) funds from the federal government, and three were directly managed through the state EES organization. The findings of the study indicate that these programs (1) had flexibility to experiment, iterate, and reorganize as a result of their initial experiences, (2) made extensive use of networking to involve local groups in program delivery, (3) employed a large variety of delivery methods, and (4) made substantial efforts to tailor literature and handouts to the target audiences.

  1. Review of studies of research opportunities in energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Hane, G.J.; Williams, T.A.; Hauser, S.G.

    1984-04-01

    This study attempted to systematically identify, screen and review many of the 27 remaining major studies across the end-use areas. The method used to identify and review the studies, the scope of this effort, the types of studies reviewed, and the R and D opportunities identified are discussed. The actual report reviews are included. The review format and the kinds of information sought from each report are discussed. The general categories of the material are described; the types of information presented are summarized; and gaps in the literature are discussed. A discussion of R and D needs and comments of the specific needs presented and their temporal and evolutionary characteristics are included. The findings of the review are summarized and the researchers contacted for information are listed.

  2. Study of the conservation of mechanical energy in the motion of a pendulum using a smartphone

    Science.gov (United States)

    Pierratos, Theodoros; Polatoglou, Hariton M.

    2018-01-01

    A common method that scientists use to validate a theory is to utilize known principles and laws to produce results on specific settings, which can be assessed using the appropriate experimental methods and apparatuses. Smartphones have various sensors built-in and could be used for measuring and logging data in physics experiments. In this work, we propose the use of smartphones for students to study a simple pendulum’s conservation of mechanical energy. It is well known that common smartphones do not have a velocity sensor, which could make the verification of the conservation of mechanical energy a simpler task. To overcome this, one can use an accelerometer to measure the centripetal acceleration on the mass and from that, deduce the maximum velocity. In this study, we show that this can be achieved with reasonable uncertainty, using a mobile device. Thus, we developed an experiment which corroborates with the conservation of mechanical energy and can be performed in the classroom.

  3. Selling energy conservation.

    Science.gov (United States)

    Hinrichsen, D

    1995-01-01

    This article concerns the Organization of the Petroleum Exporting Countries (OPEC) crisis and its impact on energy efficiency measures in the US. In 1985, when the OPEC collapsed, the US government had avoided the need to construct 350 gigawatts of new electric capacity. The most successful efficiency improvements, especially in household appliances and equipment, lighting and tightened energy efficiency standards in new buildings, resulted from the OPEC event. The real innovation of that time was the change in profit rules for utilities. This revolution and the way some US utilities view energy have not caught on elsewhere. Despite the initiative toward improving energy efficiency in homes, offices and industries, the change has been slow. Partly to blame are the big development banks, which pointed out that short-term conservation and efficiency measures could save at least 15% of the total energy demand without the need for major investment. The benefits of energy conservation was shown during the oil shock when per capita energy consumption fell by 5% in the member states of the Organization of Economic Cooperation and Development, while the per capita gross domestic product grew by a third. There has been a decrease in energy expenditure worldwide, and the scope for further energy savings is enormous, but governments need to recognize and seize the opportunity.

  4. Energy conservation, efficiency and energy audit

    International Nuclear Information System (INIS)

    Sharma, R.A.

    2006-01-01

    In this paper the author discusses the conservation, efficiency, audit, fundamentals, differences and methods, the objectives of energy conservation, definitions of energy audit, scope, short term, medium term and long term measures to be taken for conservation are discussed

  5. What is the optimum social marketing mix to market energy conservation behaviour: an empirical study.

    Science.gov (United States)

    Sheau-Ting, Low; Mohammed, Abdul Hakim; Weng-Wai, Choong

    2013-12-15

    This study attempts to identify the optimum social marketing mix for marketing energy conservation behaviour to students in Malaysian universities. A total of 2000 students from 5 major Malaysian universities were invited to provide their preferred social marketing mix. A choice-based conjoint analysis identified a mix of five social marketing attributes to promote energy conservation behaviour; the mix is comprised of the attributes of Product, Price, Place, Promotion, and Post-purchase Maintenance. Each attribute of the mix is associated with a list of strategies. The Product and Post-purchase Maintenance attributes were identified by students as the highest priority attributes in the social marketing mix for energy conservation behaviour marketing, with shares of 27.12% and 27.02%, respectively. The least preferred attribute in the mix is Promotion, with a share of 11.59%. This study proposes an optimal social marketing mix to university management when making decisions about marketing energy conservation behaviour to students, who are the primary energy consumers in the campus. Additionally, this study will assist university management to efficiently allocate scarce resources in fulfilling its social responsibility and to overcome marketing shortcomings by selecting the right marketing mix. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Why not energy conservation?

    International Nuclear Information System (INIS)

    Carlson, Shawn

    2016-01-01

    Energy conservation is a deep principle that is obeyed by all of the fundamental forces of nature. It puts stringent constraints on all systems, particularly systems that are ‘isolated,’ meaning that no energy can enter or escape. Notwithstanding the success of the principle of stationary action, it is fair to wonder to what extent physics can be formulated from the principle of stationary energy. We show that if one interprets mechanical energy as a state function, then its stationarity leads to a novel formulation of classical mechanics. However, unlike Lagrangian and Hamiltonian mechanics, which deliver their state functions via algebraic proscriptions (i.e., the Lagrangian is always the difference between a system’s kinetic and potential energies), this new formalism identifies its state functions as the solutions to a differential equation. This is an important difference because differential equations can generate more general solutions than algebraic recipes. When applied to Newtonian systems for which the energy function is separable, these state functions are always the mechanical energy. However, while the stationary state function for a charged particle moving in an electromagnetic field proves not to be energy, the function nevertheless correctly encodes the dynamics of the system. Moreover, the stationary state function for a free relativistic particle proves not to be the energy either. Rather, our differential equation yields the relativistic free-particle Lagrangian (plus a non-dynamical constant) in its correct dynamical context. To explain how this new formalism can consistently deliver stationary state functions that give the correct dynamics but that are not always the mechanical energy, we propose that energy conservation is a specific realization of a deeper principle of stationarity that governs both relativistic and non-relativistic mechanics. (paper)

  7. Energy conservation applications of microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Shih, James Y.

    1979-07-01

    A survey of the application of microprocessors for industrial and commercial energy conservation has been made. Microprocessor applications for HVAC, chiller control, and automotive equipment are discussed. A case study of successful replacement of a conventional cooling plant control is recounted. The rapid advancement of microelectronic technology will affect efficient energy control, more sophisticated control methodology, and more investment in controls.

  8. Energy conservation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Courtright, H.A. [Electric Power Research Inst., Palo Alto, CA (United States)

    1993-12-31

    The conservation of energy through the efficiency improvement of existing end-uses and the development of new technologies to replace less efficient systems is an important component of the overall effort to reduce greenhouse gases which may contribute to global climate change. Even though uncertainties exist on the degree and causes of global warming, efficiency improvements in end-use applications remain in the best interest of utilities, their customers and society because efficiency improvements not only reduce environmental exposures but also contribute to industrial productivity, business cost reductions and consumer savings in energy costs.

  9. On energy conservation in extended magnetohydrodynamics

    International Nuclear Information System (INIS)

    Kimura, Keiji; Morrison, P. J.

    2014-01-01

    A systematic study of energy conservation for extended magnetohydrodynamic models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energy

  10. Study on Laws, Regulations and Standards on Energy Efficiency, Energy Conserving and Emission Reduction of Industrial Boilers in EU

    Science.gov (United States)

    Liu, Ren; Zhao, Yuejin; Chen, Haihong; Liang, Xiuying; Yang, Ming

    2017-12-01

    Industrial boilers are widely applied in such fields as factory power, building heating, and people’s lives; China is the world’s largest producer and user of industrial boilers, with very high annual energy consumption; clear requirements have been put forward by China on the energy efficiency since the “11th Five-year Plan” with the hope to save energy and reduce emission by means of energy efficiency standards and regulations on the supervision and control of various special equipment. So far, the energy efficiency of industrial boilers in China has been improved significantly but there is still a gap with the EU states. This paper analyzes the policies of energy efficiency, implementation models and methods of supervision and implementation at the EU level from laws, regulations, directives as well as standards; the paper also puts forward suggestions of energy conserving and emission reduction on the improvement of energy conserving capacity of industrial boilers in China through studying the legislations and measures of the developed countries in energy conserving of boilers.

  11. Mass and energy-capital conservation equations to study the price evolution of non-renewable energy resources

    International Nuclear Information System (INIS)

    Gori, F.

    2006-01-01

    Mass conservation equation of non-renewable resources is employed to study the resources remaining in the reservoir according to the extraction policy. The energy conservation equation is transformed into an energy-capital conservation equation. The Hotelling rule is shown to be a special case of the general energy-capital conservation equation when the mass flow rate of extracted resources is equal to unity. Mass and energy-capital conservation equations are then coupled and solved together. It is investigated the price evolution of extracted resources. The conclusion of the Hotelling rule for non-extracted resources, i.e. an exponential increase of the price of non-renewable resources at the rate of current interest, is then generalized. A new parameter, called 'Price Increase Factor', PIF, is introduced as the difference between the current interest rate of capital and the mass flow rate of extraction of non-renewable resources. The price of extracted resources can increase exponentially only if PIF is greater than zero or if the mass flow rate of extraction is lower than the current interest rate of capital. The price is constant if PIF is zero or if the mass flow rate of extraction is equal to the current interest rate. The price is decreasing with time if PIF is smaller than zero or if the mass flow rate of extraction is higher than the current interest rate. (author)

  12. Overview of energy-conserving development planning and design techniques based on five case studies

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Findings and recommendations are presented of a review of five case studies of ways to conserve energy through development planning and site design in communities. Two approaches were used. In the first approach, a conventional, pre-existing plan was analyzed to determine potential energy use. Once energy-conservation options were identified and evaluated, the conventional plan was modified by employing those options. This approach was used in The Woodlands, Burke Center, and Radisson studies. In the second approach, energy-conservation options are independently identified and evaluated. Those options that passed specific criteria screening were then utilized in developing one or more totally new plans based on energy objectives. This approach was used in Greenbrier and Shenandoah. Radisson is a new town on the outskirts of Syracuse, New York. Greenbrier is a 3000 acre planned community adjacent to Norfolk and Virginia Beach. Shenandoah is a proposed new town in the Atlanta urbanized area. The Woodlands is a new community under development north of Houston. Burke Center is a residential planned unit development in Fairfax County, Virgnia. (MCW)

  13. Energy conservation in SIMMER

    International Nuclear Information System (INIS)

    Arnold, L.A.; Knowles, J.B.

    1983-11-01

    The SIMMER code contains models of the many interacting thermo-hydraulic processes that occur during a hypothetical core disruptive accident (HCDA), to provide an overall picture from accident initiation to containment loading. In calculations of roof loadings following the HCDA, errors in computing the overall energy balance were found to be up to ten times the kinetic energy of the sodium slug which creates the loading. On this account, the results were considered to be seriously compromised. This report describes a systematic investigation into the effect, nature and origin of the energy discrepancies. Its main conclusion are that, the errors stem from a systematic rather than a random source, energy errors for individual cells can be two decades larger than the mean value provided by the code, and cellular mass and energy errors are strongly correlated and they can actually increase when the mesh is refined. A likely cause of the conservation errors is identified as the solution of the liquid phase mass and energy equations at effectively different time instants during each timestep. (author)

  14. Feasibility study on energy conservation and environmental improvement at Pakistan Steel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Feasibility study on energy conservation and environmental improvement was carried out with the aim of considering the realization of the CDM (clean development mechanism) project for reduction of global warming gas emissions and contributing to the environmental improvement and economic growth in Pakistan. In the study, projects on the following were studied: coke oven coal moisture control (CMC), sinter cooler waste heat recovery, blast furnace hot stove waste heat recovery, blast furnace pulverized coal injection (PCI), blast furnace top pressure recovery turbine (TRT), hot strip mill reheating furnace regenerative type burner, coke oven environmental improvement, and blast furnace cast house dust collection. As a result of the study, the implementation of the following three projects was regarded as promising in terms of energy conservation and economical effects: blast furnace pulverized coal injection, blast furnace top pressure recovery turbine and hot strip mill reheating furnace regenerative type burner. Further, the reduction in poisonous gas by the coke oven environmental improvement project was made a top priority. In Pakistan, the price of energy is kept low, and therefore, effects of energy conservation projects are not very much expected. However, the PCI project has an effect of substitution of low-priced domestic coal for imported coal. (NEDO)

  15. Basic feasibility study on energy conservation at Lianyuan Iron and Steel Group Co., Ltd.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For the purpose of conserving energy and reducing greenhouse effect gas emission, a feasibility study was carried out of the installation of energy conservation facilities at the steelworks of Lianyuan Iron and Steel Group Complex, Loudi City, Hunan Province, China. The installation of the following facilities was studied: coke dry quenching (CDQ) equipment, coal moisture control (CMC) equipment, sintering ignition furnace equipment, cooler exhaust heat recovery equipment, top pressure recovery turbine (TRT), and hot stove exhaust heat recovery equipment. As a result of the study, the energy conservation amount was 20,000 toe/y by CDQ, 2,530 toe/y by CMC, 900 toe/y by improvement of ignition furnace in the sintering process, 12,300 toe/y by sintering cooler, 13,200 toe/y by TRT, and 10,300 toe/y by hot stove exhaust heat recovery equipment. Further, the amount of greenhouse effect gas reduction was 61,022 t-CO2/y, 7,843 t-CO2/y, 2,896 t-CO2/y, 38,060 t-CO2/y, 55,295 t-CO2/y, and 40,621 t-CO2/y, respectively. In the estimation of effects vs. expenses, the sintering ignition furnace, sintering cooler exhaust heat recovery, and hot stove exhaust heat recovery indicated the comparatively favorable values. (NEDO)

  16. Basic survey for joint implementation, etc. Basic feasibility study on energy conservation at Tadeusz Sendzimir Steelworks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of reducing greenhouse effect gas emissions, a feasibility study was conducted on the energy conservation at Huta Sendzimir Steelworks in Poland. The study was made on quantity-energy consuming facilities such as blast furnace, sintering plant and steelmaking plant, power plant, by-producing gas, purchased power, etc. Moreover, as to the energy consuming system, surveys were made on the exhaust heat recovery equipment already introduced and energy saving equipment for pig iron/steel making. As a result, it was found out that Huta Sendzimir Steelworks has an ability and experiences for implementation of the energy conservation project with no problems. As methods to save energy in individual production process, the introduction of the following was proposed: pressure recovery turbine of blast furnace, equipment for high temperature stove exhaust heat recovery, sintering cooler exhaust heat recovery, oxygen combustion furnace exhaust gas recovery, etc. By the introduction of these equipment, the reduction amount of greenhouse effect gas emissions per year will be approximately 180,000 ton-CO2. (NEDO)

  17. Electric energy utilization and conservation

    International Nuclear Information System (INIS)

    Tripathy, S.C.

    1991-01-01

    Various aspects of electric energy utilization and conservation are discussed. First chapter reviews thermodynamic aspects of energy conservation. Subsequent chapters describe possibilities and methods of energy conservation in thermal power plants, airconditioning and ventilation systems, electric lighting systems, electric heating systems in industries, and railway electrification. Chapter 8 describes various modes of energy storage and compares their economies. The next chapter discusses various facets of energy economics and the last chapter discusses the practical aspects of energy conservation in different industries and power utilities. (M.G.B.). 100 refs

  18. On Study of Application of Power Electronical Technology in Field of Energy Conservation

    Science.gov (United States)

    Song, Ke

    2017-09-01

    aiming at achieving the sustainable development in economy and improving living standard of the residents, the government departments in China have strengthened the promotion of green, low-carbon and sustainable development concepts. Under this context, the energy conservation concept is implemented during the implementation of social production and life activities. Currently, in order to ensure the improvement in social energy conservation benefits, the advanced technologies are applied by China's enterprises and residents. This paper, based on this, discusses the development situations of energy conservation in China, and analyzes the application of power electronical technology in the field of energy conservation, hoping to realize the sustainable development of energy conservation cause in China and to gain high yield.

  19. Fiscal 1999 feasibility study on energy conservation at Novo-oil refinery in Ufa City

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-31

    An energy conservation plan was examined for Novo oil refinery of Bashneftechim Company in Ufa City, Bashkortstan, Russia for the purpose of making the plan tied to the COP3 joint implementation. The objective units in the study include an atmospheric and vacuum distillation unit with throughput of 7.8 million tons/year, a visbreaker and a vacuum gas oil hydrodesulfurization unit (for feedstock of FCC in Lenin Refinery), and a catalytic cracking unit, for example. Energy conservation measures are improvement and revamping of heating furnace to control excess air ratio in furnace, installation of air pre-heater or heat recovery boiler to recover heat from exhaust gas of heating furnace, additional installation of heat exchangers to recover heat from product oils, and efficiency improvement of overall operation by modernization of instrumentation and controlling equipment. The policy is not complete rebuilding of the facilities but utilizing the existing facilities by improving energy efficiency as far as possible. The study shows that investment for energy saving will be recovered within 3-6 years in many cases while total investment is estimated to be 1.5-3.0 billion yen. Total reduction of fuel consumption will be 500-800 million yen. Yearly reduction of CO2 emission will amount to 0.29 million tons (23%). (NEDO)

  20. Price-structure of electricity and district-heating. A background study for energy conservation programme

    International Nuclear Information System (INIS)

    1994-01-01

    The present report deals with the pricing and price-structure of electricity and district-heating with their effects on energy saving. It constitutes part of the groundwork for the new Government Energy Conservation Programme. The report describes principles for the pricing of electricity and district-heating in Finland, and gives some examples of tariffs in foreign countries, which are interesting from the point of view of energy saving. Different utilities apply quite similar pricing principles but there are big differences in price levels between the utilities. The difference in consumer prices can be almost 100 % in the case of electricity and over 150 % as concerns district-heating. The change in retail prices in the last ten years has not had a big general impact on the consumption of electricity or on energy saving. On the other hand, when the price increases of individual utilities are studied, the impact on energy saving at least in the short term can be seen. It seems that an increase of the fixed charges in relation to energy rates has been as a general trend after 1990. To promote energy saving the changing energy rates should be given special emphasis in determining electricity and district-heating tariffs. The opening of the electricity market means that the electricity suppliers face a new situation also when pricing their products. Customers and their expectations will play an increasingly role. (orig.)

  1. A multi-harmonic generalized energy balance method for studying autonomous oscillations of nonlinear conservative systems

    Science.gov (United States)

    Balaji, Nidish Narayanaa; Krishna, I. R. Praveen; Padmanabhan, C.

    2018-05-01

    The Harmonic Balance Method (HBM) is a frequency-domain based approximation approach used for obtaining the steady state periodic behavior of forced dynamical systems. Intrinsically these systems are non-autonomous and the method offers many computational advantages over time-domain methods when the fundamental period of oscillation is known (generally fixed as the forcing period itself or a corresponding sub-harmonic if such behavior is expected). In the current study, a modified approach, based on He's Energy Balance Method (EBM), is applied to obtain the periodic solutions of conservative systems. It is shown that by this approach, periodic solutions of conservative systems on iso-energy manifolds in the phase space can be obtained very efficiently. The energy level provides the additional constraint on the HBM formulation, which enables the determination of the period of the solutions. The method is applied to the linear harmonic oscillator, a couple of nonlinear oscillators, the elastic pendulum and the Henon-Heiles system. The approach is used to trace the bifurcations of the periodic solutions of the last two, being 2 degree-of-freedom systems demonstrating very rich dynamical behavior. In the process, the advantages offered by the current formulation of the energy balance is brought out. A harmonic perturbation approach is used to evaluate the stability of the solutions for the bifurcation diagram.

  2. Geothermal energy of Slovakia - CO2 emissions reduction contribution potential (background study for conservative and non-conservative approach

    Directory of Open Access Journals (Sweden)

    Branislav Fričovský

    2012-12-01

    Full Text Available Total geothermal energy potential is estimated for 209 714 TJ per year or 6 650 MWth. Natural conditions define a use of thermalwaters for heat generation only. Accepting proportion of real achievable output of geothermal projects in the non-conservative scenarioat a rate of 1 861 MWth or 13 440 TJ per year, yearly carbon dioxide savings are up to reach 0,357 MtCO2.yr-1 or 12,5 of cumulativeMtCO2 in 35 years. By a contrast, introduction of conservative approach points to increase in a geothermal heat production from 145 to243 TJ per period or 6 944 TJ of cumulative 35 years production, with a real outcome of 0,45 MtCO2 cumulative carbon dioxidesavings, corresponding to yearly real savings from 9,4 .10-3 to 15,8 .10-3 MtCO2.

  3. Applying species-energy theory to conservation: A case study for North American birds

    Science.gov (United States)

    Linda Bowers Phillips; Andrew J. Hansen; Curtis H. Flather; Jim Robinson-Cox

    2010-01-01

    Ecosystem energy is now recognized as a primary correlate and potential driver of global patterns of species richness. The increasingly well-tested species-energy relationship is now ripe for application to conservation, and recent advances in satellite technology make this more feasible. While the correlates for the species-energy relationship have been addressed many...

  4. Energy conservation. Ambitions and results

    International Nuclear Information System (INIS)

    2011-01-01

    From results of monitoring it is shown that energy conservation in the Netherlands is behind the ambitions of the Dutch government. The Dutch Court of Audit examined the reasons why energy conservation targets are not met and what the consequences are for the national and European energy and climate goals for 2020. Also the Dutch Court of Audit looked at the possibilities to make energy saving policies more effective. [nl

  5. Energy conserving site design case study, Burke Center, Virginia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The pattern of energy consumption within a modern suburban community, Burke Center, is examined. A variety of actions that could be incorporated to reduce its future energy demands is proposed. Recommendations have been limited to those that are technically feasible today, are reasonably cost-effective, and that should generate little or no market resistance. Findings are that: of the total energy consumed by the Burke Center Community, 57% will go to off-site transportation needs; energy conserving site planning generally coincides with cost-effective site planning; water-to-air heat pumps proved to be the most efficient and cost-effective method available today in the study area for reducing heating and cooling costs in buildings; certain public services such as the collection of solid waste, mail pick-up and delivery, and other routine activities can be made more energy efficient; and the use of available water saving devices in residential and commercial buildings can reduce a community's total utility energy consumption by as much as 20%. (MCW)

  6. Energy conserving site design: Greenbrier case study, Chesapeake, Virginia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-01

    A specific case study of project planning for energy conservation for a major planned unit development at the 3000-acre Greenbrier development site in Chesapeake, Virginia, is summarized. The research suggests that very considerable reductions in energy conservation can be achieved within the confines of private-sector land development and residential construction with increased incremental costs of $200.00 to $3150.00 per dwelling unit. It is hypothesized that energy consumption at Greenbrier can be reduced by one-half with an average annual savings of 21,275 kWh per residential unit, using state-of-the-art technology with careful planning and control. This represents an annual savings $750.00 per unit at the current utility rate of 3.5 cents per kWh. These savings can be achieved through reduction in heating and cooling loads and application of more-efficient heating and cooling of the remaining loads. The reduction in loads are achieved by redesign of the land plan to include a higher percentage of south-facing lots, use of vegetation to modify microclimate, decreases in air infiltration, the use of 2 x 6 framing, better insulation, and the use of an insulated slab-on-grade foundation. Further energy savings can be expected by increased efficiencies in mechanical systems used for space heating and cooling and domestic hot water. When applied to the single-family portion of Greenbrier, containing 541 dwelling units, these options reduce the total end-use energy consumption 54.7%. This reduction represents an annual savings of $432,800.00 for an initial capital investment of $1.7 million.

  7. Psychological dimensions of Energy Conservation

    Directory of Open Access Journals (Sweden)

    Tonello, Graciela

    2012-12-01

    Full Text Available One of the most serious current environmental problems is the depletion of non renewable natural resources. The vast majority of our daily actions involve the consumption of energy and they increase the problem. Environmental psychology studies the psychological motivations that determine pro-ecological behaviour. In this context the aim of this review was to determine which psychological models and variables are better descriptors of residential energy conservation, comparing the predictive power of different models related to behaviour, residential consumption as well as to the acceptability of energy policies. Results suggest that energy saving is mainly linked to altruistic motivations, followed by egoistic reasons and in a minor way to environmental concerns. People would act according to these dimensions when contextual conditions are perceived as appropriate.

  8. Final Report - Conservation & Renewable Energy Potential Study For Smith River Rancheria

    Energy Technology Data Exchange (ETDEWEB)

    Greg Retzlaff

    2007-07-01

    In January 2006 the Smith River Rancheria (SRR), located in Smith River, California, contracted with the team of Strategic Energy Solutions (SES) and Evergreen NRG to conduct a study for the community. The objective of the study was to identify renewable generation opportunities that would facilitate Rancheria energy independence through SRR owned and operated power projects. These generation facilities were to be located either on or near the reservation. Specifically, the Rancheria was interested in the viability of generating electric power using biomass and wind fuel resources. Initial research identified that a very small portion of the community's energy could be offset by renewable energy generation due to the low solar resource in this area, and the lack of significant wind or biomass resources on or near reservation land. Some larger projects were identified which offered little or no benefit to the Rancheria. As a result, the scope of this study was changed in October 2006 to focus on energy efficiency opportunities for key reservation facilities, with a continued analysis of smaller renewable energy opportunities within reservation boundaries. The consulting team initially performed a resource analysis for biomass and solar generation opportunities in the region of the Rancheria. It was quickly concluded that none of these options would yield renewable power for the Rancheria at costs competitive with current utility sources, and that any larger installations would require substantial funding that may not be available. Having made these conclusions early on, the study effort was redirected and the team investigated each of the major Rancheria buildings to look for solar, wind and conservation opportunities. The buildings were audited for energy use and the roof areas were examined for exposure of solar radiation. Wind resources were also investigated to determine if smaller wind turbines would offer power generation at a reasonable cost.

  9. Dictionary of applied energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Kut, D

    1982-01-01

    The escalating cost of energy is drawing an ever increasing number of people into the planning and execution of energy conservation measures and programs and confronts them with the specialist terminology of the conservationist. The object of this illustrated dictionary is to list the generality of terms employed in energy conservation practice and to explain, with the aid of appropriate illustrations, the basic definitions and underlying techniques.

  10. Feasibility study on energy conservation and modernization of Darkhan Cement Company

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    For Darkhan Cement Co. in Mongolia, an investigational survey was made of possibilities of conserving energy and reducing greenhouse effect gas emission. The Darkhan Cement plant, the two production lines of which are of a wet long kiln system, has a production capacity of approximately 0.2 million t/y. In the project, one of the two kilns is to be converted to dry NSP kiln, and the following were to be adopted: covered-in storage space for raw materials, reclaimer, blending silo, automatic control system by computer, vertical mill, new air beam type grate cooler, etc. As a result of the study, after carrying out this technology improvement, the amount of energy conservation is 30,973 toe/y, and the amount of greenhouse effect gas reduction is 95,836 t-CO2/y. The total fund required for the project is approximately 3.082 billion yen, and the period of fund payback is 11 years after the start of the project. However, the necessary condition for realizing the project is the application of the preferential system such as the environment special yen credit, etc. (NEDO)

  11. Water Conservation Study (Water and Energy) Energy Engineering Analysis Program (EEAP) FY94S Fort Knox, Kentucky. Volume 1

    National Research Council Canada - National Science Library

    1994-01-01

    .... Life cycle cost analyses were performed using the Life Cycle Cost in Design (LCCID) computer program. Project descriptions and DDl39l forms were prepared for four Energy Conservation Investment Program...

  12. Water Conservation Study (Water and Energy), Energy Engineering Analysis Program (EEAP) FY94S, Fort Knox, Kentucky; Executive Summary

    National Research Council Canada - National Science Library

    1994-01-01

    .... Life cycle cost analyses were performed using the Life Cycle Cost in Design (LCCID) computer program. Project descriptions and DD1391 forms were prepared for four Energy Conservation Investment program...

  13. Information strategies and energy conservation behavior: A meta-analysis of experimental studies from 1975 to 2012

    International Nuclear Information System (INIS)

    Delmas, Magali A.; Fischlein, Miriam; Asensio, Omar I.

    2013-01-01

    Strategies that provide information about the environmental impact of activities are increasingly seen as effective to encourage conservation behavior. This article offers the most comprehensive meta-analysis of information based energy conservation experiments conducted to date. Based on evidence from 156 published field trials and 525,479 study subjects from 1975 to 2012, we quantify the energy savings from information based strategies. On average, individuals in the experiments reduced their electricity consumption by 7.4%. Our results also show that strategies providing individualized audits and consulting are comparatively more effective for conservation behavior than strategies that provide historical, peer comparison energy feedback. Interestingly, we find that pecuniary feedback and incentives lead to a relative increase in energy usage rather than induce conservation. We also find that the conservation effect diminishes with the rigor of the study, indicating potential methodological issues in the current literature. - Highlights: • We conduct a meta-analysis of information-based energy conservation experiments. • We analyze 156 published trials and 524,479 study subjects from 1975 to 2012. • On average, individuals in the experiments reduced electricity consumption by 7.4%. • Individualized feedback via audits and consulting results in the largest reductions. Pecuniary feedback and incentives lead to a relative increase in energy usage

  14. Industrial energy conservation technology

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, P.S.; Williams, M.A. (eds.)

    1980-01-01

    A separate abstract was prepared for each of the 60 papers included in this volume, all of which will appear in Energy Research Abstracts (ERA); 21 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  15. Industrial Energy Conservation Technology

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A separate abstract was prepared for each of the 55 papers presented in this volume, all of which will appear in Energy Research Abstracts (ERA); 18 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  16. Energy-conserving site-design case study, Radisson, New York. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    Radisson is a 2,950-acre new community currently being developed by the New York State Urban Development Corporation and located in central New York, 12 miles north-west of Syracuse. Case-study sites selected for this project are a 95-acre residential site and the 51-acre Town Center of the new community. Development on the Residential Site is a low-density (2.8 dwelling units/acre) mixture of single-family, townhouse and multi-family units. Development on the Town Center site is a mixture of small-scale commercial use (144,000 sq. ft.) and 330+ multi-family dwelling units. Energy-conserving plans developed for both sites have focused on passive measures to reduce energy use for space heating. Utility-system options have been identified for both sites, but require further study as to feasibility and cost. This report summarizes energy savings and cost differentials due to passive measures incorporated in both the residential and Town Center Plans. The future implementation schedule, also discussed, summarizes the procedures an schedule required for implementation of the passive measures, as well as further study required for the development of utility-system options. 4 tables.

  17. Energy conservation and petroleum substitution

    Energy Technology Data Exchange (ETDEWEB)

    Kebbekus, J; Kraft-Woelfel, G

    1982-04-01

    Shortage and price increases for energy have caused large population groups to give new thought to the subject. For the knowledge on energy necessary to make a decision, ultimate consumers mostly rely on their social environment, personal contacts and the media. Important information on energy conservation should be provided by regional electric utilities. A concept for this purpose is discussed.

  18. A survey and measurement study of GPU DVFS on energy conservation

    Directory of Open Access Journals (Sweden)

    Xinxin Mei

    2017-05-01

    Full Text Available Energy efficiency has become one of the top design criteria for current computing systems. The dynamic voltage and frequency scaling (DVFS has been widely adopted by laptop computers, servers, and mobile devices to conserve energy, while the GPU DVFS is still at a certain early age. This paper aims at exploring the impact of GPU DVFS on the application performance and power consumption, and furthermore, on energy conservation. We survey the state-of-the-art GPU DVFS characterizations, and then summarize recent research works on GPU power and performance models. We also conduct real GPU DVFS experiments on NVIDIA Fermi and Maxwell GPUs. According to our experimental results, GPU DVFS has significant potential for energy saving. The effect of scaling core voltage/frequency and memory voltage/frequency depends on not only the GPU architectures, but also the characteristic of GPU applications.

  19. Reduced energy conservation law for magnetized plasma

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Decyk, V.K.

    1994-01-01

    A global energy conservation law for a magnetized plasma is studied within the context of a quasiparticle description. A reduced energy conservation law is derived for low-frequency, as compared to the gyromagnetic frequency, plasma motions with regard to both non-uniform mean flows and fluctuations in the plasma. The mean value of plasma energy is calculated and sufficient stability conditions for non-equilibrium plasmas are derived. (orig.)

  20. Energy & Conservation Glossary. Third Edition.

    Science.gov (United States)

    Amend, John; And Others

    Defined in this glossary are nearly 800 terms related to energy and conservation. Space provided at the end of each alphabetic section allows users to add new words and definitions. This publication is part of a set of resources prepared for teachers by "Energy and Man's Environment." (Author/WB)

  1. Energy conservation in rented buildings

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Broechner, J.; Forsman, J.; Gaunt, L.; Holgersson, M.

    1984-08-01

    The bulletin is an anthology of nine essays by different authors addressing the issue of energy conservation in buildings, where there exists a landlord/tenant relationship. After an overview of the rental market and the stock of rental buildings different types of rental contracts and energy charges are described.

  2. Energy conservation in foundry

    International Nuclear Information System (INIS)

    Natu, V.M.

    1994-01-01

    In any foundry, the cost of fuel in the form of coal, oil or electrical power, is about 10 to 15% of the cost of the product. Saving of the order of 30 to 50% can be achieved in energy by reducing consumption of fuel and increasing efficiency. This has been illustrated by describing 4 examples in foundry industry. In each case, saving in terms of rupees is also indicated. (N.B.)

  3. Conserving energy in smallholder agriculture. A multi-objective programming case-study of northwest India

    International Nuclear Information System (INIS)

    Thankappan, Samarthia; Midmore, Peter; Jenkins, Tim

    2006-01-01

    In semi-arid conditions in Northwest India, smallholder agriculture has made increasing use of subsidised mechanisation and energy inputs to reduce short-term risks. However, detrimental environmental consequences have occurred, not least a rapidly falling water table, and energy-intensive production is threatened by the prospect of increasing scarcity and expense of energy supplies, especially as urban demands are forecast to grow rapidly. This paper describes the energy flows through four subsystems of smallholder agricultural villages: the crop system; non-crop land uses; livestock systems; and households. It employs a multi-objective programming model to demonstrate choices available for maximands either of net solar energy capture or financial surpluses. Applied to three villages selected to represent major settlement types in the Saurashtra region of Gujarat, the results demonstrate that both energy conservation and financial performance can be improved. Although these results need qualifying because of the reductionist, linear character of the model used, they do provide important insights into the cultural role of mechanisation and the influence of traditional agricultural practices. They also underline the need for local energy conservation strategies as part of an overall approach to improved self-determination in progress towards rural sustainability. (author)

  4. Feasibility study of energy conservation and greenhouse gases mitigation in the sugar industry in Poland

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Upon the request from the Ministry of Agriculture of the Polish Government, a survey has been performed on three sugar production factories (Lesmierz, Lapy and Werbkowice) in Poland in relation with conservation of energy and reduction of warming gas emission. The survey has been made from the following two aspects: improvement of energy utilization efficiency in the sugar production processes, and efficiency improvement and fuel conversion in the boilers being the energy supplying source. As a result of the discussions on the sugar production process improvement, annual fuel conservation of 304,495 GJ (or 12,688 tons as converted to coal) in total for the three factories, or the energy saving rate of 28% was obtained. Regarding the greenhouse gas emission, an effect of reducing 25,235 tons, or a reduction rate of 27% was achieved. In the combination of the sugar production process improvement and the boiler improvement, the fuel conservation will be 18,363 tons as converted into coal, and the reduction of the greenhouse gas emission will be 56,107 tons. However, when based on the present coal price and natural gas price, the improvement efforts will not be realizable economically for both of Lesmierz and Werbkowice factories, hence comprehensive judgment is required from the viewpoint of the fuel price and environment preservation expense in the future. (NEDO)

  5. Conserving energy by eliminating waste

    Energy Technology Data Exchange (ETDEWEB)

    Jones, N. H.

    1979-07-01

    Some ways in which energy is wasted in industry are discussed and the losses involved are quantified. Reference is made to a particular loss in annealing furnaces; wasted energy in factory and lighting systems; heat generated by motors and lighting and by such processes as welding; unlagged hot pipework and most hot processes; and poor building envelope features. It is concluded that an industry should declare its intention of conservation at the highest possible level, identify conservation as a manufacturing target, and invest the responsibility in people for whom it is a full-time activity. (MCW)

  6. Conservation and Renewable Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, K.H.

    1991-05-01

    This bibliography lists reports and selected papers published under the Oak Ridge National Laboratory Conservation and Renewable Energy Program from 1986 through February 1991. Information on documents published prior to 1986 can be obtained from ORNL. Most of the documents in the bibliography are available from Oak Ridge National Laboratory.

  7. Nonprice incentives and energy conservation.

    Science.gov (United States)

    Asensio, Omar I; Delmas, Magali A

    2015-02-10

    In the electricity sector, energy conservation through technological and behavioral change is estimated to have a savings potential of 123 million metric tons of carbon per year, which represents 20% of US household direct emissions in the United States. In this article, we investigate the effectiveness of nonprice information strategies to motivate conservation behavior. We introduce environment and health-based messaging as a behavioral strategy to reduce energy use in the home and promote energy conservation. In a randomized controlled trial with real-time appliance-level energy metering, we find that environment and health-based information strategies, which communicate the environmental and public health externalities of electricity production, such as pounds of pollutants, childhood asthma, and cancer, outperform monetary savings information to drive behavioral change in the home. Environment and health-based information treatments motivated 8% energy savings versus control and were particularly effective on families with children, who achieved up to 19% energy savings. Our results are based on a panel of 3.4 million hourly appliance-level kilowatt-hour observations for 118 residences over 8 mo. We discuss the relative impacts of both cost-savings information and environmental health messaging strategies with residential consumers.

  8. Case history studies of energy conservation improvements in the meat industry

    Energy Technology Data Exchange (ETDEWEB)

    1982-06-01

    Presented are case histories for ten energy-efficient technologies implemented by the meat industry. For each case is presented: the name and location of the plant, name of plant employee contact with address and telephone number, energy consumption and costs at the plant before and after implementation of energy-conserving technology, description of the investment decision process, and changes in production or product quality as a result of the new equipment. The measures presented are: continuous rendering, high-pressure return on the boiler, heat recovery from condensate return and flash steam, continuous whole blood processing, preheating of process water with recovered refrigeration waste heat, continuous rendering of poultry scraps, electrical stimulation of beef, preheating and storing process water with recovered refrigeration waste heat, microcomputer control system, and housekeeping improvements. (LEW)

  9. Exploration of energy conservation opportunities through energy audit

    International Nuclear Information System (INIS)

    Swain, R.K.; Swain, A.K.; Subudhi, B.

    1994-01-01

    Developing countries like India, has to cater the imbalance of energy between the supply and demand in almost all the sectors, so as to devise energy conservation strategies. Electricity is one of the most convenient form of energy gifted to the mankind. The raising cost of electricity and the need to raise large resources to meet the required demand is only at the most of other important assets of the country. This gap between demand and supply can be partially met by appropriate energy conservation schemes through energy audit- a scientific approach for balancing the supply and demand. India has to go a long way ahead in it, therefore, energy audit has been initiated at vulnerable energy consuming places. This paper presents the effectiveness of energy audit strategy in achieving energy conservation. The energy audit of Shrama Shakti Bhavan, an office complex at New Delhi, has been taken as a case study for this work. (author). 2 refs., 12 tabs

  10. Exploration of energy conservation opportunities through energy audit

    International Nuclear Information System (INIS)

    Swain, R.K.; Swain, A.K.; Subudhi, B.

    1995-01-01

    Developing countries like India, has to cater to the imbalance of energy between the supply and demand in almost all the sectors, so as to devise energy conservation strategies. Electricity is one of the most convenient form of energy gifted to the mankind. The raising cost of electricity and the need to raise large resources to meet the required demand is only at the cost of other important assets of the country. This gap between demand and supply can be partially met by appropriate energy conservation schemes through energy audit- a scientific approach for balancing the supply and demand. India has to go a long way ahead in it, therefore, energy audit has been initiated at vulnerable energy consuming places. This paper presents the effectiveness of energy audit strategy in achieving energy conservation. The energy audit of Shrama Shakti Bhavan, an office complex at New Delhi, has been taken as a case study. (author). 2 refs., 12 tabs

  11. Energy conservation in India: a profile

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The decade and half since the oil crisis of 1973 has been a period that has witnessed a steady growth of the energy conservation ethos in India. Housekeeping and low risk conservation options have been largely preferred so far. The IMWG (Inter-Ministerial Working Group on Utilization and Conservation of Energy) study did not evaluate potential saving through the introduction of high risk and high pay-off technologies. The potential for energy conservation in India is substantial. However, some of the barriers to achieving the potential in the past have been energy prices which deviate from rational tariffs and prices, a lack of information on specific measures and of options for achieving energy conservation, paucity of capital for schemes requiring technology upgradation and efficiency improvements, and the inadequacy if institutional arrangement for promoting energy conservation in different sectors of the economy. Recent efforts pursued by several organizations however provide some basis for optimism. Given the growing capital intensity of the energy sector in India, more vigorous efforts are likely to be made in the future. In particular, success stories in some industrial units indicate that decentralized efforts by the units themselves can achieve a great deal in improving the efficiency of energy use, particularly in the Indian industry. Policies to promote such programmes would help accelerate energy conservation efforts in industrial units and in other sectors. It is therefore hoped that the intensity of energy use in several sectors of the indian economy will be reduced significantly in the coming years. (author). 3 refs., 3 tabs

  12. Foreign energy conservation integrated programs

    International Nuclear Information System (INIS)

    Lisboa, Maria Luiza Viana; Bajay, Sergio Valdir

    1999-01-01

    The promotion of energy economy and efficiency is recognized as the single most cost-effective and least controversial component of any strategy of matching energy demand and supply with resource and environmental constraints. Historically such efficiency gains are not out of reach for the industrialized market economy countries, but are unlikely to be reached under present conditions by developing countries and economics in transition. The aim of the work was to analyze the main characteristics of United Kingdom, France, Japan, Canada, Australia and Denmark energy conservation integrated programs

  13. Energy conservation. A goal for Albertans

    Energy Technology Data Exchange (ETDEWEB)

    Zwicky, L

    1988-01-01

    In late 1985, the Public Advisory Committees to the Environmental Council of Alberta began working toward a draft conservation strategy for Alberta. A prospectus was published and meetings and workshops held, the goal being a conservation strategy in place by 1992. This report is one of a series of discussion papers on relevant sectors such as agriculture, fish and wildlife, tourism, and various specific energy sources. This report focuses on energy use in general in the province, including the role of energy conservation in a conservation strategy, the potential for energy conservation, barriers, actions to encourage conservation, the impacts of conserving energy, and the next steps to take. 3 figs., 1 tab.

  14. Study of Multi-Armed Bandits for Energy Conservation in Cognitive Radio Sensor Networks

    Directory of Open Access Journals (Sweden)

    Juan Zhang

    2015-04-01

    Full Text Available Technological advances have led to the emergence of wireless sensor nodes in wireless networks. Sensor nodes are usually battery powered and hence have strict energy constraints. As a result, energy conservation is very important in the wireless sensor network protocol design and the limited power resources are the biggest challenge in wireless network channels. Link adaptation techniques improve the link quality by adjusting medium access control (MAC parameters such as frame size, data rate, and sleep time, thereby improving energy efficiency. In this paper we present an adaptive packet size strategy for energy efficient wireless sensor networks. The main goal is to reduce power consumption and extend the whole network life. In order to achieve this goal, the paper introduces the concept of a bounded MAB to find the optimal packet size to transfer by formulating different packet sizes for different arms under the channel condition. At the same time, in achieve fast convergence, we consider the bandwidth evaluation according to ACK. The experiment shows that the packet size is adaptive when the channel quality changes and our algorithm can obtain the optimal packet size. We observe that the MAB packet size adaptation scheme achieves the best energy efficiency across the whole simulation duration in comparison with the fixed frame size scheme, the random packet size and the extended Kalman filter (EKF.

  15. Analysis of sectoral energy conservation in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Mofleh, Anwar; Taib, Soib; Salah, Wael [School of Electrical and Electronics Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Mujeebu, M. Abdul [School of Mechanical Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2009-06-15

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors. (author)

  16. Analysis of sectoral energy conservation in Malaysia

    International Nuclear Information System (INIS)

    Al-Mofleh, Anwar; Taib, Soib; Mujeebu, M. Abdul; Salah, Wael

    2009-01-01

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors.

  17. Transportation energy conservation data book

    Energy Technology Data Exchange (ETDEWEB)

    Loebl, A. S.; Bjornstad, D. J.; Burch, D. F.; Howard, E. B.; Hull, J. F.; Madewell, D. G.; Malthouse, N. S.; Ogle, M. C.

    1976-10-01

    Statistics which characterize the major transportation modes are assembled and displayed, and data on other factors which influence the transportation sector in the nation are presented. Statistical data on energy use in the transportation sector are presented in the form of tables, graphs, and charts. The following topics are covered in six chapters: Characteristics of Transportation Modes; Energy Characteristics, including energy consumption by source and by sector and energy intensiveness; Conservation Alternatives; Government Impacts, including expenditures, regulations and research, development, and demonstration spending; Energy Supply, including domestic petroleum production, prices, and projections; and Transportation Demand, including population characteristics and economic determinants. A bibliography of data sources is provided at the end of each chapter. A more general bibliography glossary, and subject index are included at the end of the book.

  18. Energy conservation using face detection

    Science.gov (United States)

    Deotale, Nilesh T.; Kalbande, Dhananjay R.; Mishra, Akassh A.

    2011-10-01

    Computerized Face Detection, is concerned with the difficult task of converting a video signal of a person to written text. It has several applications like face recognition, simultaneous multiple face processing, biometrics, security, video surveillance, human computer interface, image database management, digital cameras use face detection for autofocus, selecting regions of interest in photo slideshows that use a pan-and-scale and The Present Paper deals with energy conservation using face detection. Automating the process to a computer requires the use of various image processing techniques. There are various methods that can be used for Face Detection such as Contour tracking methods, Template matching, Controlled background, Model based, Motion based and color based. Basically, the video of the subject are converted into images are further selected manually for processing. However, several factors like poor illumination, movement of face, viewpoint-dependent Physical appearance, Acquisition geometry, Imaging conditions, Compression artifacts makes Face detection difficult. This paper reports an algorithm for conservation of energy using face detection for various devices. The present paper suggests Energy Conservation can be done by Detecting the Face and reducing the brightness of complete image and then adjusting the brightness of the particular area of an image where the face is located using histogram equalization.

  19. Integrated technology selection for energy conservation and PAHs control in iron and steel industry: Methodology and case study

    International Nuclear Information System (INIS)

    Li, Li; Lu, Yonglong; Shi, Yajuan; Wang, Tieyu; Luo, Wei; Gosens, Jorrit; Chen, Peng; Li, Haiqian

    2013-01-01

    Energy conservation and PAHs (polycyclic aromatic hydrocarbon) control are two challenges for the iron and steel industry, especially where the industry has developed at high speed. How to select appropriate technologies to improve energy efficiency and control pollution from PAHs simultaneously is encountered by both the researchers and the decision makers. This study sets up a framework on technology selection and combination which integrates technology assessment, multiple objective programming and scenario analysis. It can predict proper technology combination for different emission controls, energy conservation targets and desired levels of production. An iron and steel factory in Southwestern China is cited as a case. It is shown that stricter PAHs control will drive the transformation from process control technology to alternative smelting technology. In low PAHs limit, 25% energy reduction is a threshold. Before inclusion of a restraint on energy consumption at 25% reduction, PAHs emission is the key limiting factor for the technology selection; while after inclusion of this restraint, energy consumption becomes the key limiting factor. The desired level of production will also influence the technology selection. This study can help decision makers to select appropriate technologies to meet the PAHs control objectives and energy conservation strategies in energy-intensive industries. - Highlights: ► We predict technical strategy for energy and PAHs reduction in iron and steel mill. ► With low PAHs control objectives, process control technologies are preferable. ► With medium and high PAHs control goals, alternative smelting technology is dominate. ► In low PAHs control objective, 25% energy reduction is a threshold

  20. Personality traits and energy conservation

    International Nuclear Information System (INIS)

    Shen, Meng; Cui, Qingbin; Fu, Liping

    2015-01-01

    As a cost-effective solution to energy conservation, behavior based method focuses on changing people's behavior through normative feedback for energy efficiency. While the application of behavior-based method is promising, the challenge exists to achieve efficiently sustainable behavioral change. Based on multi-period observation of energy behavior at the Joint Base Andrews in Maryland, this paper presents a model-based approach aimed to improve the nationally popular and deep-seated benchmark setting strategy for normative feedback used in home energy reports. The improved approach has its merits of countering the undesirable boomerang effect and enhancing the effectiveness of normative feedback targeting different personalities. By introducing a modified opinion dynamics model, this paper simulates the process of energy behavior change and therefore identifies the driver and elementary rules of behavioral change. In particular, the paper defines various behavioral zones in accordance with people's personality and proposes a new customized energy reporting mechanism that maps normative benchmark to personality trait. The new energy reporting policy has strong industrial implication for promoting behavior-based method towards a sustained energy conservation movement. -- Highlights: •We explore the personality driving resident behavior change under peer pressure. •We map the distribution of behavior clusters driven by personality and benchmarks. •The model is tested using data from an experiment conducted in Maryland, U.S. •The population exposed to normative feedback can be divided into six categories. •A personality trait-based home energy reporting mechanism is proposed

  1. Non conventional energy sources and energy conservation

    International Nuclear Information System (INIS)

    Bueno M, F.

    1995-01-01

    Geographically speaking, Mexico is in an enviable position. Sun, water, biomass and geothermal fields main non conventional energy sources with commercial applications, are presents and in some cases plentiful in national territory. Moreover the coastal tidal power which is in research stage in several countries. Non conventional energy sources are an alternative which allow us to reduce the consumption of hydrocarbons or any other type of primary energetic, are not by oneself choices for the energy conservation, but energy replacements. At the beginning of this year, CONAE created the Direction of Non conventional Energy Sources, which main objective is to promote and impulse programs inclined towards the application of systems based in renewable energy sources. The research centers represent a technological and consultative support for the CONAE. They have an infrastructure developed along several years of continuous work. The non conventional energy sources will be a reality at the same time that their cost be equal or lower than the cost for the traditional generating systems. CONAE (National Commission for Energy Conservation). (Author)

  2. Feasibility study on energy conservation at Sao Paulo state primary schools in the Federative Republic of Brazil

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A feasibility study has been performed on the energy conservation project aimed at the future CDM in relation with energy consumption in the lighting equipment at the Sao Paulo state primary schools in the Federative Republic of Brazil. Out of about 5,500 primary schools existing in Sao Paulo, 3,414 schools were selected as the objects of the surveys and discussions. The present program intends to introduce energy saving facilities such as high-efficiency fluorescent lamps and controls for illuminating the primary schools to save the energies and reduce emission of the global warming gases. In this economy project, the owners do not need to make initial investments, wherein the required funds are taken care by conservation of electric power during the service contract period. If about 3,000 schools are selected as the object, a fund of about 2.3 billion yen will be required in total. Total energy conservation quantity during 15 years from 2002 to 2016 as achieved by this project will be 532,740 MWh, corresponding to 114,540 tons of crude oil. The effect of reducing the emission of global warming gases will be 110,949 t-CO2 during the same period of time. (NEDO)

  3. Overview of energy-conservation research opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Hopp, W.J.; Hauser, S.G.; Hane, G.J.; Gurwell, W.E.; Bird, S.P.; Cliff, W.C.; Williford, R.E.; Williams, T.A.; Ashton, W.B.

    1981-12-01

    This document is a study of research opportunities that are important to developing advanced technologies for efficient energy use. The study's purpose is to describe a wide array of attractive technical areas from which specific research and development programs could be implemented. Research areas are presented for potential application in each of the major end-use sectors. The study develops and applies a systematic approach to identifying and screening applied energy conservation research opportunities. To broadly cover the energy end-use sectors, this study develops useful information relating to the areas where federally-funded applied research will most likely play an important role in promoting energy conservation. This study is not designed to produce a detailed agenda of specific recommended research activities. The general information presented allows uniform comparisons of disparate research areas and as such provides the basis for formulating a cost-effective, comprehensive federal-applied energy conservation research strategy. Chapter 2 discusses the various methodologies that have been used in the past to identify research opportunities and details the approach used here. In Chapters 3, 4, and 5 the methodology is applied to the buildings, transportation, and industrial end-use sectors and the opportunities for applied research in these sectors are discussed.Chapter 6 synthesizes the results of the previous three chapters to give a comprehensive picture of applied energy conservation research opportunities across all end-use sectors and presents the conclusions to the report.

  4. Database marketing for energy conservation. Practice-oriented study; Databasemarketing voor energiebesparing. Praktijk gericht onderzoek

    Energy Technology Data Exchange (ETDEWEB)

    Burghouts, H. [Energie Netwerk EN, Bilthoven (Netherlands); De Kleijn, B.; Van Leerdam, W. [Tangram Advies en Onderzoek, Zeist (Netherlands)

    2013-06-15

    In the 'Block by Block' project 13 local energy saving projects are supported in the development of concepts to realize large-scale energetic improvements of existing houses. In these projects the consortia develop strategies which are applied in the market. In addition, a number of projects is awarded with a so-called 'Green Deal' (agreements between governmental, public and private parties in the Netherlands). Part of the support is a knowledge and learning process. As part of the learning process a practice-oriented research has been carried out into the possibilities of database marketing (DBM) for energy conservation. The research focuses on the opportunities for DBM for energy savings and promising product-market combinations. The question is: can DBM contribute to improving the effectiveness of the 'Block by Block' projects? [Dutch] In het project 'Blok voor Blok' worden 13 lokale energiebesparingsprojecten gesteund bij de ontwikkeling van concepten ten behoeve van de grootschalige energetische verbetering van bestaande woningen. In deze projecten worden door de gevormde consortia strategieen ontwikkeld en uitgevoerd in de markt. Daarnaast is een aantal projecten gehonoreerd met een 'Green deal'. Onderdeel van de ondersteuning is een kennis- en leertraject. In het kader van het leertraject is een praktijk gericht onderzoek gedaan naar de mogelijkheden van databasemarketing (DBM) voor energiebesparing. Het onderzoek richt zich op de kansen voor DBM voor energiebesparing en kansrijke productmarktcombinaties. De vraag is: kan DBM bijdragen aan verbetering van de effectiviteit van projecten 'Blok voor Blok'?.

  5. Energy conservation in agriculture sector

    International Nuclear Information System (INIS)

    Maggo, J.N.

    1991-01-01

    The annual production of foodgrains in India rose from 50.8 million tonnes in 1950-51 to 178 million tonnes in 1989-90. One of the factors which led to this impressive growth is the continued increase in input of mechanization and energy in the agricultural sector by way of tractors running on diesel and pumps (for water supply) based on diesel and electricity. Electricity consumption in agricultural sector rose from 833 million kWh in 1960-61 to 47000 million kWh in 1990-91 and is further expected to rise to 81.8 TWH in 1999-2000. Considering the heavy investments required for production and supply of energy, it has become imperative to avoid wasteful use of energy and to use energy more efficiently. This can be done by : (1) Changing the electricity tariff structure from the present horse power related rates to energy consumption related rates. This will induce farmers to avoid waste in energy use. (2) Adopting energy efficiency measures. These measures are : (1) replacement of inefficient foot valves, suction pipes and delivery pipes of the pump sets, (2) increasing power factor of electric motors used for pumps sets, (3) reducing distribution losses over LT lines, and (4) optimizing use of fertilizers. This optimization will indirectly conserve energy by reducing electricity consumption by fertilizer industry. (M.G.B.). 5 refs., 4 tabs

  6. Conservation Planning for Offsetting the Impacts of Development: A Case Study of Biodiversity and Renewable Energy in the Mojave Desert.

    Science.gov (United States)

    Kreitler, Jason; Schloss, Carrie A; Soong, Oliver; Hannah, Lee; Davis, Frank W

    2015-01-01

    Balancing society's competing needs of development and conservation requires careful consideration of tradeoffs. Renewable energy development and biodiversity conservation are often considered beneficial environmental goals. The direct footprint and disturbance of renewable energy, however, can displace species' habitat and negatively impact populations and natural communities if sited without ecological consideration. Offsets have emerged as a potentially useful tool to mitigate residual impacts after trying to avoid, minimize, or restore affected sites. Yet the problem of efficiently designing a set of offset sites becomes increasingly complex where many species or many sites are involved. Spatial conservation prioritization tools are designed to handle this problem, but have seen little application to offset siting and analysis. To address this need we designed an offset siting support tool for the Desert Renewable Energy Conservation Plan (DRECP) of California, and present a case study of hypothetical impacts from solar development in the Western Mojave subsection. We compare two offset scenarios designed to mitigate a hypothetical 15,331 ha derived from proposed utility-scale solar energy development (USSED) projects. The first scenario prioritizes offsets based precisely on impacted features, while the second scenario offsets impacts to maximize biodiversity conservation gains in the region. The two methods only agree on 28% of their prioritized sites and differ in meeting species-specific offset goals. Differences between the two scenarios highlight the importance of clearly specifying choices and priorities for offset siting and mitigation in general. Similarly, the effects of background climate and land use change may lessen the durability or effectiveness of offsets if not considered. Our offset siting support tool was designed specifically for the DRECP area, but with minor code modification could work well in other offset analyses, and could provide

  7. 77 FR 59712 - Energy Conservation Program: Energy Conservation Standards for Dishwashers

    Science.gov (United States)

    2012-10-01

    ... amended energy conservation standards, DOE conducted a market survey using all available public... Energy Conservation Program: Energy Conservation Standards for Dishwashers AGENCY: Office of Energy... establish amended energy conservation standards for dishwashers in the Federal Register on May 30, 2012. DOE...

  8. Feasibility study on modernization and energy conservation at Uong Bi power station

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Discussions have been given on energy conservation, and reduction in greenhouse gas emission through efficiency improvement at the Uong Bi coal burning power plant in Vietnam. The Uong Bi power plant, which has become using coal of lower quality than the design value, has had incomplete combustion, resulting in increase of unburned components in ash, and decrease of the boiler efficiency to 65 to 70%. Clinker hopper troubles have been occurring frequently, causing plant shutdown at a number of times. The turbine efficiency also shows as very low value as 26 to 27%. The plan has envisaged replacement of combustion parts of the boilers, withdrawal and replacement of the turbine generation systems, new installation of electric dust collectors, modification of the ash treatment system, additional installation of the re-circulation system, new installation of waste water treatment facilities, and modification of the waste water treatment equipment in the plant premises. As a result of the discussions, the annual energy saving quantity was found to be 62,936 tons of crude oil equivalent for the case where only one turbine is renewed, and 93,298 tons for the case where both of the two turbines are renewed. The annual reduction quantity of the greenhouse gas emission was found to be 251,215 tons and 372,402 t-CO2, respectively. (NEDO)

  9. 78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

    Science.gov (United States)

    2013-12-06

    ... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

  10. Dark Energy from Violation of Energy Conservation.

    Science.gov (United States)

    Josset, Thibaut; Perez, Alejandro; Sudarsky, Daniel

    2017-01-13

    In this Letter, we consider the possibility of reconciling metric theories of gravitation with a violation of the conservation of energy-momentum. Under some circumstances, this can be achieved in the context of unimodular gravity, and it leads to the emergence of an effective cosmological constant in Einstein's equation. We specifically investigate two potential sources of energy nonconservation-nonunitary modifications of quantum mechanics and phenomenological models motivated by quantum gravity theories with spacetime discreteness at the Planck scale-and show that such locally negligible phenomena can nevertheless become relevant at the cosmological scale.

  11. Organizational determinants of energy-conservation management

    Energy Technology Data Exchange (ETDEWEB)

    Selmer, J. (Hong Kong Baptist Coll., Kowloon (Hong Kong). Dept. of Management)

    1994-10-01

    Energy-conservation activities require new functional and technical activities in all participating organizations and the prospects of effectively managing such activities are contingent upon the specific organizational setting. Based on a previous large-scale investigation in which we identified five organizational archetypes, in-depth longitudinal case studies were undertaken of five organizations in Sweden during 5 years, each organization representing a different archetype. The five organizations have distinct organizational prerequisites and separate basic motivations to engage and succeed in energy-conservation management. Implications for government policy and managerial action are discussed in detail. (author)

  12. Database marketing for energy conservation. Practice-oriented study; Databasemarketing voor energiebesparing. Praktijk gericht onderzoek

    Energy Technology Data Exchange (ETDEWEB)

    Burghouts, H. [Energie Netwerk EN, Bilthoven (Netherlands); De Kleijn, B.; Van Leerdam, W. [Tangram Advies en Onderzoek, Zeist (Netherlands)

    2013-06-15

    In the 'Block by Block' project 13 local energy saving projects are supported in the development of concepts to realize large-scale energetic improvements of existing houses. In these projects the consortia develop strategies which are applied in the market. In addition, a number of projects is awarded with a so-called 'Green Deal' (agreements between governmental, public and private parties in the Netherlands). Part of the support is a knowledge and learning process. As part of the learning process a practice-oriented research has been carried out into the possibilities of database marketing (DBM) for energy conservation. The research focuses on the opportunities for DBM for energy savings and promising product-market combinations. The question is: can DBM contribute to improving the effectiveness of the 'Block by Block' projects? [Dutch] In het project 'Blok voor Blok' worden 13 lokale energiebesparingsprojecten gesteund bij de ontwikkeling van concepten ten behoeve van de grootschalige energetische verbetering van bestaande woningen. In deze projecten worden door de gevormde consortia strategieen ontwikkeld en uitgevoerd in de markt. Daarnaast is een aantal projecten gehonoreerd met een 'Green deal'. Onderdeel van de ondersteuning is een kennis- en leertraject. In het kader van het leertraject is een praktijk gericht onderzoek gedaan naar de mogelijkheden van databasemarketing (DBM) voor energiebesparing. Het onderzoek richt zich op de kansen voor DBM voor energiebesparing en kansrijke productmarktcombinaties. De vraag is: kan DBM bijdragen aan verbetering van de effectiviteit van projecten 'Blok voor Blok'?.

  13. Feasibility study on energy conservation through modernization of cement plant (Sichuan Double Horse Cement Group Co. Ltd.)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    An investigational study was conducted of possibilities of energy conservation and greenhouse effect gas emission reduction in the cement production process of Double Horse Cement Co., Mianyang City, Sichuan Province, China. Double Horse Cement adopts the wet type long kiln production system and has a production ability of approximately 1.5 million t/y. In the project, as to three production lines out of the six production lines, improvement was planned to be made of the technologies on the following: mixing of raw materials, grinding of raw materials, NSP, clinker cooler, clinker pre-grinder, high-efficiency separator, waste heat use power generation, etc. As a result of the study, it was found that the energy conservation amount obtained was 54,646 toe/y. And, the amount of greenhouse effect gas reduction was 169,086 t-CO2/y. The total fund required for this project was approximately 5.553 billion yen and the internal earning rate was 7.36% after tax. When the project is carried out, expenses vs. effects are 9.8 toe/million yen in energy conservation amount and 30.4 t-CO2/million yen in greenhouse effect gas reduction. (NEDO)

  14. Energy conservation policy in China

    Energy Technology Data Exchange (ETDEWEB)

    Haugland, T; Roland, K [ECON-Centre for Economic Analysis, Oslo (NO)

    1992-02-01

    Energy market developments and the state of the environment will be decisive for economic growth and modernization of Chinese society. Lack of adequate energy supplies could in the future seriously impair the growth potential of the economy, as it has partly done during the 1980s. Environmental damage creates major health problems for the population and hamper the productive capacity of Chinese agriculture and industry. One obvious and effective measure to meet these challenges is a policy that pursues more efficient use of energy supplies. China achieved impressive results in energy efficiency improvements during the 1980s, largely on the back of the cheapest and most obvious conservation opportunities. These are now exhausted. Further improvements will require stronger measures. It is difficult to see how the current rate of economic growth (above 6 per cent) and energy efficiency improvements can be sustained without comprehensive market reforms. Economic growth and development is however, in Chinese policy, subordinate to political stability and continuity. The disruption of the political and economic reform processes in 1988-9 was largely motivated by a perceived fear of political instability and disintegration of the state. Thus, there may exist some degree of conflict between the objective of strong economic growth and the existing 'social order and stability'. To balance the potential conflict inherent in this development process is the big challenge facing Chinese society for the coming decades. (author).

  15. Thermal Comfort and Strategies for Energy Conservation.

    Science.gov (United States)

    Rohles, Frederick H., Jr.

    1981-01-01

    Discusses studies in thermal comfort which served as the basis for the comfort standard. Examines seven variables in the human response to the thermal environment in terms of the ways in which they can be modified to conserve energy. (Author/MK)

  16. Case study of energy conservation at national refinery limited, Karachi (Pakistan)

    International Nuclear Information System (INIS)

    Shah, F.A.; Shaikh, M.B.; Mahesar, G.H.

    2000-01-01

    Petroleum refining is one of the four top most industries in Pakistan in energy consumption and to save energy is the concern of every one. In this research, authors have calculated the designed and actual efficiency of the industrial furnaces at ''Two stage distillation unit'' of National Refinery Limited, Karachi. Observations were made for energy (Oil) consumption, heat (radiation) losses, through the furnace wall, tubing and stacks flue gases. The study shows difference in the data given at the time of design and at present working data. The furnace (01-F1) is 60% efficient and recorded 9% pounds of oil more per hour, giving 18% more heat loss. The reasons behind the fuel and energy losses are discussed with the suggestions. (authors)

  17. A Compendium of Energy Conservation Success Stories

    Science.gov (United States)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

  18. A compendium of energy conservation success stories

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office/endash/Energy Utilization Research/endash/sponsors research and technical inventions for all end-use sectors.

  19. Energy production, conversion, storage, conservation, and coupling

    CERN Document Server

    Demirel, Yaşar

    2012-01-01

    Understanding the sustainable use of energy in various processes is an integral part of engineering and scientific studies, which rely on a sound knowledge of energy systems. Whilst many institutions now offer degrees in energy-related programs, a comprehensive textbook, which introduces and explains sustainable energy systems and can be used across engineering and scientific fields, has been lacking. Energy: Production, Conversion, Storage, Conservation, and Coupling provides the reader with a practical understanding of these five main topic areas of energy including 130 examples and over 600 practice problems. Each chapter contains a range of supporting figures, tables, thermodynamic diagrams and charts, while the Appendix supplies the reader with all the necessary data including the steam tables. This new textbook presents a clear introduction of basic vocabulary, properties, forms, sources, and balances of energy before advancing to the main topic areas of: • Energy production and conversion in importa...

  20. A study of the rebound effect on China's current energy conservation and emissions reduction: Measures and policy choices

    International Nuclear Information System (INIS)

    Lin, Boqiang; Yang, Fang; Liu, Xia

    2013-01-01

    Energy efficiency improvement leads to a reduction in the real cost of energy services per unit, thus bringing about an increase in the demand for energy services. Therefore, the potential energy savings and emission reduction from efficiency improvements might be offset, which is known as “the rebound effect”. This study disaggregates the effect into the direct and indirect effects based on the Slutsky Equation and finds that the rebound effect of Chinese urban households is approximately 22%. It is found that the indirect effect is stronger than the direct effect. These findings prove that the initial goals of the government on energy conservation and emission reduction could not be achieved by improving energy efficiency alone, but need to be supplemented with relevant energy pricing reforms. - Highlights: • This study disaggregates the effect into the direct and indirect effects. • The rebound effect of Chinese urban households is approximately 22%. • The indirect effect is stronger than the direct effect. • Energy pricing reform is needed to mitigate the rebound effect

  1. Energy conservation at the Nippon Steel Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, Shigetoshi

    1979-07-01

    Characteristics of the Japanese energy demand-supply structure are discussed. Nippon Steel's energy consumption and energy conservation measures are discussed. Results of Nippon's energy conservation activities are summarized. Additional information on the Japanese short-range measures for the reduction in oil consumption, the effect of efforts for the reduction of petroleum consumption, and concrete measures for securing the effect is included.

  2. Energy conservation prospects through electric load management

    Energy Technology Data Exchange (ETDEWEB)

    El-Shirbeeny, E H.T.

    1984-04-01

    In this paper, concepts of electric load management are discussed for effective energy conservation. It is shown that the conservation program must be comprehensive to provide solutions to the problems facing the electric consumer, the electric utility and the society by reducing the rate of growth of energy consumption and power system peak demand requirements. The impact of energy management programs on electric energy conservation is examined, with emphasis on efficiency, storage, cogeneration and controls with computers.

  3. CO2 reduction through energy conservation

    International Nuclear Information System (INIS)

    1991-05-01

    A study was carried out of the potential to economically reduce carbon dioxide emissions through energy conservation in the petroleum and natural gas industry. The study examined current and projected emissions levels, cogeneration at gas plants, flaring, economics, regulation, reporting requirements, implementation, and research and development. Economically attractive energy conservation measures can reduce oil and gas industry, exclusive of Athabasca oil sands operations, CO 2 emissions by 6-7%. The energy conservation options identified range from field energy awareness committees through to equipment retrofits and replacement. At ca 3 million tonnes/y, these reductions will not offset the increases in oil and gas related CO 2 emissions anticipated by producers and Alberta government agencies. There will be increasing emphasis on in-situ bitumen production, more energy intensive light crude oil production and increasing natural gas sales, increasing energy inputs in excess of reductions. Cogeneration of electricity for utility company distribution and for internally required steam at gas plants and in-situ production sites is not economic due to low electricity prices. 8 tabs

  4. Energy conservation attitudes, knowledge, and behaviors in science laboratories

    International Nuclear Information System (INIS)

    Kaplowitz, Michael D.; Thorp, Laurie; Coleman, Kayla; Kwame Yeboah, Felix

    2012-01-01

    Energy use per square foot from science research labs is disproportionately higher than that of other rooms in buildings on campuses across the nation. This is partly due to labs’ use of energy intensive equipment. However, laboratory management and personnel behavior may be significant contributing factors to energy consumption. Despite an apparent increasing need for energy conservation in science labs, a systematic investigation of avenues promoting energy conservation behavior in such labs appears absent in scholarly literature. This paper reports the findings of a recent study into the energy conservation knowledge, attitude and behavior of principle investigators, laboratory managers, and student lab workers at a tier 1 research university. The study investigates potential barriers as well as promising avenues to reducing energy consumption in science laboratories. The findings revealed: (1) an apparent lack of information about options for energy conservation in science labs, (2) existing operational barriers, (3) economic issues as barriers/motivators of energy conservation and (4) a widespread notion that cutting edge science may be compromised by energy conservation initiatives. - Highlights: ► Effective energy conservation and efficiency depend on social systems and human behaviors. ► Science laboratories use more energy per square foot than any other academic and research spaces. ► Time, money, quality control, and convenience overshadow personnel’s desire to save energy. ► Ignorance of conservation practices is a barrier to energy conservation in labs.

  5. Comparative study of energy-efficiency and conservation systems for ceramic metal-halide discharge lamps

    International Nuclear Information System (INIS)

    Hermoso Orzáez, Manuel Jesús; Andrés Díaz, José Ramón de

    2013-01-01

    Interest in energy savings in urban lighting is gaining traction and has become a priority for municipal administrations. LED (light-emitting diode) technology appears to be the clear future lighting choice. However, this technology is still rapidly developing and has not been sufficiently tested. As an intermediate step, alternative proposals for energy-saving equipment for traditional discharge lamps are desirable so that the current technologies can coexist with the new LED counterparts for the short and medium term. This article provides a comparative study between two efficiency and energy-saving systems for discharge lamps with metal-halide and ceramic technologies, i.e., a lighting flow dimmer-stabilizer and a double-level electronic ballast. - Highlights: ► It has been demonstrated the possibility of regulating ceramic metal-halide lamps with lighting flow dimmer-stabilizer. ► Electronic ballasts can save approximately double quantity of energy than lighting flow dimmer-stabilizers. ► The use of lighting flow dimmer-stabilizer is more profitable than electronic ballasts due to costs and reliability

  6. Energy conservation-problems and perspectives for developing nations

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, P. R. [National Productivity Council, New Delhi, India; Padrmanabhan, S.

    1980-03-15

    While studies of the past indicated a tight coupling of energy consumption and GNP, longer range indications are that they can be mutually decoupled. Developing nations can move forward towards achieving significant energy savings in their economics without fear of economic stagnation. Conservation policies at the national level are difficult to enunciate and the implementation mechanisms have to be strengthened. Macro-level economics may not be easily apparent as unit level economics. If energy conservation is not practiced, we would require the development of additional energy supply capacity with all of its economic implications. The role of science and technology inputs in industrial processes for minimizing energy consumption is significant. Sufficient funds should be allocated for pursuance of R and D activities in energy conservation and in developing alternative energy resources to supplement and later replace the existing costly transient fuels. A climate to promote conservation of energy should formulate policies which lays emphasis on energy conservation strategies rather than soley on energy growth issues. The effort should be directed towards energy programs that are a judicious mix up of energy and energy conservation strategies for achieving economic growth and a reasonable standard of living commensurate with the aspirations of the people. In capital-scarce economies, an account of the fact that energy conservation requires far less investment than energy capital supplies, conservation policies must play a central role in the overall framework of developing nation's national energy policies.

  7. Interference and the Law of Energy Conservation

    Science.gov (United States)

    Drosd, Robert; Minkin, Leonid; Shapovalov, Alexander S.

    2014-01-01

    Introductory physics textbooks consider interference to be a process of redistribution of energy from the wave sources in the surrounding space resulting in constructive and destructive interferences. As one can expect, the total energy flux is conserved. However, one case of apparent non-conservation energy attracts great attention. Imagine that…

  8. Electric and gas utility marketing of residential energy conservation case studies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    The objective of this research was to obtain information about utility conservation marketing techniques from companies actively engaged in performing residential conservation services. Many utilities currently are offering comprehensive services (audits, listing of contractors and lenders, post-installation inspection, advertising, and performing consumer research). Activities are reported for the following utilities: Niagara Mohawk Power Corporation; Tampa Electric Company; Memphis Light, Gas, and Water Division; Northern States Power-Wisconsin; Public Service Company of Colorado; Arizona Public Service Company; Pacific Gas and Electric Company; Sacramento Municipal Utility District; and Pacific Power and Light Company.

  9. Energy conservation opportunities: audit vis-a-vis mine productivity

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, G.H.

    2009-07-01

    Mining operation, whether opencast or underground, with modern equipment is highly energy intensive, needing energy conservation and management to ensure efficiency, cost effectiveness, and overall productivity. Exhaustible primary energy resources such as coal, lignite, oil, and nuclear fuels are being mined out to meet our energy needs. An attempt has been made in this paper to highlight the energy conservation opportunities, energy audit, the relevant Energy Conservation Act 2001 and certain energy saving measures leading to higher productivity followed by a few case study examples. 3 refs.

  10. 75 FR 20111 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Science.gov (United States)

    2010-04-16

    ... Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool... heating equipment and pool heaters. Table I.1--Amended Energy Conservation Standards for Residential Water... for national energy and water conservation; and 7. Other factors the Secretary of Energy (Secretary...

  11. Feasibility study on environmental improvement and energy conservation of a mercury/diaphram cell chlor-alkali plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In relation to facilities of Azerchimia, state concern, in Sumgait City, Azerbaijan, an investigational study was conducted of the project for energy conservation and greenhouse effect gas emission reduction by converting the caustic soda plant from the mercury process to the ion exchange process. The facilities of Azerchimia are badly superannuated and consume much more electric power than those in the newest technology. Moreover, the soil pollution by the plant using the mercury process is becoming a big problem. By carrying out this project, energy conservation can be achieved by reducing the amount of purchased power from thermal power plants outside. As a result of the study, the amount of the fuel used at the power plant was reduced to 40,700 toe/y. And, the amount of greenhouse effect gas emission was reduced to 131,000 t-CO2/y. In the study of the profitability, the internal earning rate of investment after tax was 8.6% and the internal earning rate of fund was 40% in the case of soft loans. In the case of commercial loans, however, they were 8.6% and 9.4%, respectively, which indicated that the materialization of the project was low. (NEDO)

  12. Feasibility study on an energy conservation project at Tabriz Refinery in Iran

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective of saving energy and reducing greenhouse gas emission, a feasibility study has been executed to discuss applicable measures on oil refining facilities in Tabriz Oil Refinery in Islamic Republic of Iran. The discussion objects are the ten devices related to atmospheric and reduced pressure distillation, visbreaker, naphtha hydrogenating desulfurization, naphtha contact reforming, reduced pressure hydro-cracking of light oil, hydrogen manufacturing, amine rinsing, asphalt manufacturing, and boilers. Major improvement items include: modification of the excessive air ratio control facility, installation of a superheating furnace waste gas recovering device, additional installation of heat exchangers in the raw material oil preheating system, and increased heat recovery by improving distribution of distillation column reflux. As a result of the feasibility study, the investment recovery performance was anticipated to be contained within about five years, with consideration on procurement of some of the devices in Iran. The approximate investment amount would be 2 billion yen, the annual fuel saving amount would be about 660 million yen, and the energy saving ratio would be 13.5%. The carbon dioxide emission quantity would be reduced annually by about 155.8 tons, as contrasted to the annual emission of 1,158,000 tons from the existing facilities. (NEDO)

  13. Feasibility study on energy conservation and modernization of Chhatak Cement Co., Ltd.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective of saving energies and reducing greenhouse gas emission, discussions were given on a modernization plan for the Chhatak cement factory in The People's Republic of Bangladesh. The Chhatak cement factory having a nominal production capability of 267,000 tons a year uses mainly wet-type long kilns of old type, consuming a great amount of natural gas. The present plan has discussed adoption of the Japanese energy saving technologies. The technologies use a vertical roller mill for raw material pulverization, a suspension preheater and a short kiln for clinker sintering, a grate cooler for clinker cooling, and the pre-crushing system. The result of the discussions provided the prospects of reduction in the natural gas consumption at 50%, and reduction of electric power consumption at 16%. This will mean the annual reduction of about 22,000 tons as converted to crude oil. The CO2 reduction amount would reach 51,800 tons a year. The total investment amount would be US$37,327,000. The result of the financial analysis according to the case studies appears severe, wherein reduction of the various expenses is desired possibly by the finance from Japan with generous conditions.(NEDO)

  14. Feasibility study on energy conservation and modernization of Chhatak Cement Co., Ltd.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective of saving energies and reducing greenhouse gas emission, discussions were given on a modernization plan for the Chhatak cement factory in The People's Republic of Bangladesh. The Chhatak cement factory having a nominal production capability of 267,000 tons a year uses mainly wet-type long kilns of old type, consuming a great amount of natural gas. The present plan has discussed adoption of the Japanese energy saving technologies. The technologies use a vertical roller mill for raw material pulverization, a suspension preheater and a short kiln for clinker sintering, a grate cooler for clinker cooling, and the pre-crushing system. The result of the discussions provided the prospects of reduction in the natural gas consumption at 50%, and reduction of electric power consumption at 16%. This will mean the annual reduction of about 22,000 tons as converted to crude oil. The CO2 reduction amount would reach 51,800 tons a year. The total investment amount would be US$37,327,000. The result of the financial analysis according to the case studies appears severe, wherein reduction of the various expenses is desired possibly by the finance from Japan with generous conditions.(NEDO)

  15. An empirical study on the institutional factors of energy conservation and emissions reduction: Evidence from listed companies in China

    International Nuclear Information System (INIS)

    Zhang, Zhaoguo; Jin, Xiaocui; Yang, Qingxiang; Zhang, Yi

    2013-01-01

    Corporate excessive energy consumption and emissions are negative externality problems, with the basic countermeasure of establishing a series of institutional programs to promote corporate energy conservation and emissions reduction. This paper analyzes the influence of institutional factors such as laws, tax policies, credit policies, government subsidies, media supervision and marketization degree on corporate energy conservation and emissions reduction from the institutional perspective. The data, from 84 listed Chinese chemical and steel companies from 2006 to 2010, was analyzed using both a fixed effect model and the generalized method of moments (GMM) model. The empirical results demonstrate that these institutional factors positively affect corporate energy conservation and emissions reduction. Specifically, four factors – tax policies, government subsidies, credit policies and media supervision – have a significant positive relationship with corporate energy conservation and emissions reduction; whereas laws and marketization degree exhibit no significant effects. The research findings are theoretically and practically significant to the Chinese government with regard to improving the institutional environment and promoting corporate energy conservation and emissions reduction. - Highlights: ► Theoretical analysis of the influence of institutional factors based on NIE. ► Empirical analysis of the influence of institutional factors on ECER by regression. ► Economic measures and public opinions have positive influence on ECER in China. ► Laws and the degree of marketization have weak influence on ECER in China

  16. Promoting energy conservation in China's metallurgy industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Zhili

    2017-01-01

    China is undergoing rapid industrialization and urbanization, with consequent dramatic increase in energy demand. Given energy scarcity, environmental pollution, energy security and energy cost constraints, energy conservation will be the major strategy in China's transition to a low-carbon economy. Since the metallurgy industry is a main sector of energy consumption, the efficiency of energy conservation in this industry will affect the future prospects of energy savings. This paper analyzes the energy conservation potential of China's metallurgy industry. First, seemingly unrelated regression method is applied to investigate the relationship between energy relative price, R&D input, enterprise ownership structure, enterprise scale and energy intensity of the metallurgy industry. Then, based on the SUR results, we use the scenario analysis method to predict energy consumption and savings potential in the industry in different scenarios. This paper provides references for China's government and metallurgy industry in formulating relevant energy conservation policies. - Highlights: • Seemingly unrelated regression method is applied to analyze the energy intensity of metallurgy industry. • We use the scenario analysis method to predict energy consuming and energy saving of Chinese metallurgy industry. • Provide references for China's government and metallurgy industry in formulating relevant energy conservation policies.

  17. Illinois energy conservation plan report: 1979 revision

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-02-01

    In response to Energy Policy and this Conservation Act (PL 94-163) and Energy Conservation and Production Act (PL 94-385), this paper describes the activities to be undertaken by Illinois to meet the mandatory requirements of the Acts and to carry out other activities to encourage energy conservation by energy-consuming sectors in the state. Programs reach the residential, commercial/industrial, agricultural, educational, transportation, and government sectors. The overall goal of the program is to reduce projected energy consumption in 1980 by 5% through information and educational activities.

  18. Energy conservation employing membrane-based technology

    International Nuclear Information System (INIS)

    Narayanan, C.M.

    1993-01-01

    Membranes based processes, if properly adapted to industrial processes have good potential with regard to optimisation and economisation of energy consumption. The specific benefits of MBT (membrane based technology) as an energy conservation methodology are highlighted. (author). 6 refs

  19. Nature conservation guidelines for renewable energy projects

    International Nuclear Information System (INIS)

    1994-01-01

    English Nature commissions this report in order to identify the likely nature conservation implications of renewable energy developments and for wind farm proposals in particular, to give guidance on siting criteria to minimise the nature conservation impact. The report is intended to be of use to developers, local planning authority staff and other interested parties in considering a renewable energy project. In consequence, the report concentrates on planning and nature conservation matters and outlines technical issues where relevant. (UK)

  20. Conservation as an alternative energy source

    Science.gov (United States)

    Allen, D. E.

    1978-01-01

    A speech is given outlining the energy situation in the United States. It is warned that the existing energy situation cannot prevail and the time is fast running out for continued growth or even maintenance of present levels. Energy conservation measures are given as an aid to decrease U.S. energy consumption, which would allow more time to develop alternative sources of energy.

  1. Energy conservation potential of surface modification technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le, H.K.; Horne, D.M.; Silberglitt, R.S.

    1985-09-01

    This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

  2. Workplace Energy Conservation at Michigan State University

    Science.gov (United States)

    Allen, Summer; Marquart-Pyatt, Sandra T.

    2018-01-01

    Purpose: This research contributes to the literature on workplace energy conservation by examining the predictors of individual employee behaviors and policy support in a university. The purpose of this research is to better understand what factors influence energy conservation behaviors in this setting to inform programs and interventions.…

  3. Towards a more conservative energy policy

    International Nuclear Information System (INIS)

    Forman, N.

    1977-01-01

    The subject is treated under the following headings: the meaning of energy policy; previous attempts to formulate United Kingdom energy policy; patterns of energy supply and demand (in the UK) (current and future); towards a more conservative energy policy (the use of energy in the various sectors, the conversion and distribution of energy (coal, nuclear power, electricity, oil and gas, renewable sources)); energy policy in broader perspective (international context, cost benefit assessments, contrasting patterns of energy use, ethical issues). (U.K.)

  4. 78 FR 51463 - Energy Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures

    Science.gov (United States)

    2013-08-20

    ... merging the metal halide lamp fixture and the high-intensity discharge (HID) lamp rulemakings. This NOPR... Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures; Proposed Rule #0;#0;Federal...: Energy Conservation Standards for Metal Halide Lamp Fixtures AGENCY: Office of Energy Efficiency and...

  5. Promotion of energy conservation in developing countries through the combination of ESCO and CDM: A case study of introducing distributed energy resources into Chinese urban areas

    International Nuclear Information System (INIS)

    Ren Hongbo; Zhou Weisheng; Gao Weijun; Wu Qiong

    2011-01-01

    The implementation of an energy service company (ESCO) project in developing countries may result not only in reduced energy cost but also in considerable environmental benefits, including the reduction of CO 2 emissions, which can be assessed in an economic manner under the Clean Development Mechanism (CDM) scheme. In this way, the economic and environmental benefits of energy conservation activities can be enjoyed by both the investor and the end-user, which can reduce the investment risk and realize a rational profit allocation. This study presents a numerical analysis of the introduction of distributed energy resources (DER) into a Chinese urban area. An optimization model is developed to determine the energy system combination under the constraints on the electrical and thermal balances and equipment availability. According to the simulation results, the introduction of DER systems possesses considerable potential to reduce CO 2 emissions, especially when considering that the economic profit of the CO 2 credit will increase the incentive to adopt DER systems to an even greater extent. Furthermore, by sharing the energy cost savings with the investors under an ESCO framework, the investment risk can be further reduced, and the conditions required for the project to qualify for CDM can be relaxed. Highlights: ► An investor focused analytical model is developed to aid the investment of a DER system. ► The combination of ESCO and CDM enhances the incentive to introduce energy conservation measures. ► Electricity buy-back is effective in boosting the DER system adoption under the proposed framework. ► The increased energy cost savings allocated to the investor promotes the DER system adoption. ► The rational allocation of CER credits is of vital importance to the success of the project.

  6. Indian energy conservation- status and strategies

    International Nuclear Information System (INIS)

    Dharmalingam, P.

    1996-01-01

    High rates of inflation combined with social justice against a backdrop of ever increasing population- this is a challenge which the Government of India is facing today. It is evident that the annual growth rate of 5.6% as envisaged for the VIIIth five year plan can never be met unless conscious efforts are made to augment energy supplies by energy demand management through energy conservation. In this context, a review of the energy consuming sectors in terms of their consumption trends, energy efficiencies or intensities, energy conservation opportunities, technologies used and energy investment programmes would prove useful and informative. (author). 10 tabs

  7. In a campaign to conserve energy, Jamaica calls for promotion of rail transport and study of peak power

    Energy Technology Data Exchange (ETDEWEB)

    Renwick, D

    1979-04-01

    Prime Minister M. Manley's government in Jamaica has included, in its 1978-1982 Five-Year Development Plan, a National Energy Plan that seeks to conserve energy and reduce dependence on imported oil by accelerating exploration for indigenous oil, instituting peak-load pricing for electricity used during certain daylight hours, phasing out subsidies on petroleum products other than kerosene over 12 mo, introducing taxes on petroleum fuels, promoting rail transportation, requiring a minimum 22 mpg fuel economy in imported cars, and encouraging use of alternative energy sources including hydropower, peat from local deposits, and sugarcane bagasse. In a study sponsored by the Norwegian Government, the Norwegian company, Geco, in collaboration with Petrojam, the Jamaican Government's corporation responsible for oil industry activities, has surveyed areas off the island's northwest, west, and southwest coasts. Imported oil presently costs Jamaica more than $200 million a year, which is 25Vertical Bar3< of the total import bill. In 1990, even with energy reduction, Jamaica will need $1.4 billion for imported oil.

  8. The Evaluation of Energy Conservation Performance on Electricity: A Case Study of the TFT-LCD Optronics Industry

    Directory of Open Access Journals (Sweden)

    Ven-Shing Wang

    2016-03-01

    Full Text Available This study describes the performance evaluation of an energy management system, based on electricity consumption, for a Gen 6 Thin Film Transistor Liquid Crystal Display (TFT-LCD panel plant. Of the various production lines and facility systems, the array system and the compressed dry air consumed the most electricity of 21.8% and 19.8%, respectively, while the public utility used only 1.6% of the total electricity. The baseline electricity consumptions were correlated well (R2 ≥ 0.77 to the monthly average wet-bulb temperatures of ambient air and the panel yield rates, which were determined by the product yield over the equipment available time index. After implementing the energy saving projects, the energy conservation performance was determined using a three-parameter change-point regression model incorporated with the panel yield rates. The post-retrofit monthly savings of the total electricity consumption for the panel manufacture were 5.35%–10.36%, with the efficiency of the electricity performance revealing an upswing trend following the implementation of the energy management system.

  9. 78 FR 20842 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2013-04-08

    ... DeLonghi); energy and environmental advocates (American Council for an Energy Efficient Economy (ACEEE... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EERE-2013-BT-STD-0020] RIN 1904-AC98 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and Room Air Conditioners...

  10. Papers of the PTAC energy conservation and air emissions case studies forum

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This forum discussed different approaches to energy consumption and GHG emissions from the upstream oil and gas sector in Canada. Overviews of new technologies for emissions reduction and eco-efficiency were presented, such as the use of catalytic converters and fire-tube immersion heaters. Approaches to energy efficiency through lubrication procedures, pneumatic instrumentation and incinerators were also presented. Issues concerning cost reduction and natural gas emissions were discussed, as well as the use of energy monitoring systems to promote profit and efficiency. The optimization of various systems was also a focal point of the forum, including new methods and approaches towards mole sieve adsorption cycle optimization. Twelve papers were presented at this forum, three of which have been catalogued separately for inclusion in this database. tabs, figs.

  11. Basic survey project for joint implementation, etc. Basic feasibility study on energy conservation at Karaganda Steelworks, Kazakhstan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In relation with introducing energy saving facilities in the coke process and steel making process at Karaganda Steelworks consuming a great amount of energy in the Republic of Kazakhstan, surveys and discussions were given by Nippon Steel Corporation. While this steel mill is the only one steel making factory in the Republic of Kazakhstan, even the small-size facilities related to energy conservation and environment protection are not being used because of fund shortage. As a result of the surveys, it was revealed that this steel mill consumes much greater amount of energy per ton of crude steel than in steelworks in Japan, leaving much room for energy conservation. It was also found that achieving the conservation of energies and the reduction of global warming gas emission can be made by introducing the coke dry quenching (CDQ) facilities, coal water content adjusting equipment, and automatic combustion controls into the coke process, introducing the top-pressure recovery turbine (TRT) into the energy process, and introducing the oxygen reduced gas recovery system into the steel making process. However, it was indicated that the investment return is not very attractive because the energy price in the Republic of Kazakhstan is much cheaper than in Japan. (NEDO)

  12. Energy conservation: its planning and management

    International Nuclear Information System (INIS)

    Nanda, K.S.; Patra, K.C.

    1995-01-01

    Energy conservation, its planning and management and the development of renewable energy systems of proven design are very worthy challenges for all. Energy education at various levels is most important particularly in the development of renewable energy technology. 2 refs., 3 tabs

  13. Estimating energy conservation patterns of Greek households

    International Nuclear Information System (INIS)

    Sardianou, Eleni

    2007-01-01

    This paper develops an empirical model to investigate the main determinants of household energy conservation patterns in Greece employing cross-section data. In the empirical analysis, household energy-conserving choices models are employed, using a discrete and a latent trait variable respectively as a dependent variable. The results show that socio-economic variables such as consumers' income and family size are suitable to explain differences towards energy conservation preferences. In addition, the results suggest that electricity expenditures and age of the respondent are negatively associated with the number of energy-conserving actions that a consumer is willing to adopt. Finally, other variables such as environmental information feedback and consciousness of energy problems are characteristics of the energy-saver consumer. By evaluating consumer's decision-making process with regards to energy conservation measures, we are able to formulate and propose an effective energy conservation framework for Greece. An energy policy framework is among the main prerequisites not only to achieve sustainable development but also to maintain consumers' quality of life

  14. Report of year 2000 version on feasibility study on energy conservation at Teheran Oil Refinery in Iran

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-31

    For the purpose of the COP3 joint implementation, this paper describes the report of year 2000 version on feasibility study on energy conservation at Teheran Oil Refinery in Iran. The facilities as the object of the study include those for atmospheric pressure distillation for a capacity of 125,000 BD, vacuum distillation for a capacity of 48,000 BD, visbreaker with a capacity of 21,000 BD, naphtha hydrogenated desulfurization and naphtha reforming for a capacity of 168,000 BD, vacuum gas oil hydro-cracking for a capacity of 20,000 BD, hydrogen production of 32 MMSCFD, four 32,000 lb/h boilers, and other off-site equipment. Improvement measures include control of excessive air rate in heating furnaces, installation of air heaters and waste heat boilers to recover heat from the heating furnace stack gas, and increase in heat recovery from interim reflux. The period to recover the energy conservation investment would be about one year for the control of oxygen concentration in the stack gas, and three to five years for other main devices. The total investment amount is estimated to be 10 to 15 billion yen. Annual fuel saving would amount to 600 to 800 million yen. CO2 emission of 1.38 million tons before applying the measures will be reduced by 260,000 tons after the measures would have been applied, or 19% reduction. The country's own fund will be used for small scale modification, but financial and technological assistance from Japan is desired for medium to large scale modification. (NEDO)

  15. Report of year 2000 version on feasibility study on energy conservation at Teheran Oil Refinery in Iran

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-31

    For the purpose of the COP3 joint implementation, this paper describes the report of year 2000 version on feasibility study on energy conservation at Teheran Oil Refinery in Iran. The facilities as the object of the study include those for atmospheric pressure distillation for a capacity of 125,000 BD, vacuum distillation for a capacity of 48,000 BD, visbreaker with a capacity of 21,000 BD, naphtha hydrogenated desulfurization and naphtha reforming for a capacity of 168,000 BD, vacuum gas oil hydro-cracking for a capacity of 20,000 BD, hydrogen production of 32 MMSCFD, four 32,000 lb/h boilers, and other off-site equipment. Improvement measures include control of excessive air rate in heating furnaces, installation of air heaters and waste heat boilers to recover heat from the heating furnace stack gas, and increase in heat recovery from interim reflux. The period to recover the energy conservation investment would be about one year for the control of oxygen concentration in the stack gas, and three to five years for other main devices. The total investment amount is estimated to be 10 to 15 billion yen. Annual fuel saving would amount to 600 to 800 million yen. CO2 emission of 1.38 million tons before applying the measures will be reduced by 260,000 tons after the measures would have been applied, or 19% reduction. The country's own fund will be used for small scale modification, but financial and technological assistance from Japan is desired for medium to large scale modification. (NEDO)

  16. Consumer energy conservation policies and programs in the Netherlands

    International Nuclear Information System (INIS)

    Boer, J. de; Ester, P.; Mindell, C.; Schopman, M.

    1983-01-01

    This report presents an overview of consumer energy conservation policies and programs in the Netherlands and analyses them in terms of program objectives, conservation strategies, program instruments, context elements, and impacts on energy consumption, on consumers' lifestyles and on the environment. Part 1 briefly outlines the energy situation in the Netherlands. Diversification of energy sources and conservation of energy use are the main themes of Dutch energy policy. Controversial issues are the export volume of natural gas and the acceptability of nuclear energy. Part 2 describes and evaluates a number of consumer energy conservation programs. A broad range of programs is presented, including governmental programs (mass media compaigns, the national insulation program), initiatives from consumer organizations and environmental groups, as well as projects on the community level. Part 3 summarizes the main findings and suggests some policy recommendations. The climate of opinion in the Netherlands appears to be quite favorable towards energy conservation. The commitment to conserve, however, is not very strong. Given the broad variety of conservation programs the necessity of coordination is emphasized. As consumers tend to be weakly represented in the program agencies, it is recommended to extend or introduce their participation. Particular attention is given to the lack of evaluation studies. Usually, program impacts are unknown. The desirability of utilizing community level indicators in the assessment of energy conservation policy is underlined. (orig.)

  17. Conservation of energy for the Euler-Korteweg equations

    KAUST Repository

    Dębiec, Tomasz

    2017-12-30

    In this article we study the principle of energy conservation for the Euler-Korteweg system. We formulate an Onsager-type sufficient regularity condition for weak solutions of the Euler-Korteweg system to conserve the total energy. The result applies to the system of Quantum Hydrodynamics.

  18. Conservation of energy for the Euler-Korteweg equations

    KAUST Repository

    Dębiec, Tomasz; Gwiazda, Piotr; Świerczewska-Gwiazda, Agnieszka; Tzavaras, Athanasios

    2017-01-01

    In this article we study the principle of energy conservation for the Euler-Korteweg system. We formulate an Onsager-type sufficient regularity condition for weak solutions of the Euler-Korteweg system to conserve the total energy. The result applies to the system of Quantum Hydrodynamics.

  19. 75 FR 17036 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction

    Science.gov (United States)

    2010-04-05

    ... Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction AGENCY: Office of... standards for small electric motors, which was published on March 9, 2010. In that final rule, the U.S... titled ``Energy Conservation Standards for Small Electric Motors.'' 75 FR 10874. Since the publication of...

  20. Energy conservations from an environmental viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Hijikata, Kunio [Tokyo Inst. of Technology, Ohokayama, Meguroku (Japan)

    1993-12-31

    It is not incorrect to state that all major environmental problems, such as the greenhouse effect, destruction of the ozone layer from CFC`s, acid rain due to air pollution by NOx and SOx, etc., are caused by excessive industrial and residential energy consumption. Considering the finite world energy resources and limited global space, the day might be already upon us in which the total amount of energy consumption in the world should be reduced. To maintain a high living standard without increasing energy consumption, waste energy recovery and energy conservation are vitally important. In order to effective use of energy resources, we should really know the meaning of the energy consumption and the characteristics of energy resources. In this paper, the technological aspects of energy conservation are stated from the standpoint of available energy.

  1. 78 FR 72533 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-03

    ... published on October 23, 2013. That final rule adopted changes to definitions and energy conservation... revised definition and revised energy conservation standards for small duct high velocity central air... Congress has provided in the AEMTCA for the Secretary of Energy to revise definitions and energy...

  2. Italian energy conservation laws: Implementation problems

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Italian energy conservation Law No. 9 was designed to reduce Italy's worrisome 82% dependency on foreign energy supplies by encouraging the development and use of renewable energy sources, fuel diversification and auto-production/cogeneration by private industry. Law No. 10 was intended to promote energy conservation initiatives especially with regard to the efficient use of energy for space heating in public buildings. Both of these legal incentives have encountered great difficulties in implementation due to the inability of the Government to provide the necessary timely and sufficient start-up funds, as well as, due to the excessive bureaucratism that was built into the administrative procedures

  3. Energy conservation and efficiency in manufacturing: Employee decisions and actions

    Science.gov (United States)

    Corson, Marla D.

    Energy conservation and intensity reduction efforts are becoming increasingly more prevalent and ultimately necessary, especially for energy-intensive manufacturing companies in particular to stay in business. Typical actions are to change technology, and thus, realize an energy cost savings in overall utilities. However, in today's competitive market, with climate change and other environmental impacts as well, it is necessary for the cost of energy to be valued as a cost of making a product, and thus, managed at the same level as the cost of labor or materials. This research assessed human behavior at the individual and organizational levels both at work and at home that either prompted or prohibited employees from taking daily action to conserve energy or develop greater energy efficient practices. Ultimately, the questions began with questions regarding employee views and knowledge of energy at work and at home and what drives both behaviors toward conservation or efficiency. And, the contribution identifies the key drivers, barriers, and/or incentives that affect those behaviors. The results of this study show that the key driver and motivator for energy conservation both at home and work is cost savings. The study showed that to further motivate individuals to conserve energy at home and work, more knowledge of the impact their actions have or could have as well as tools would be needed. The most poinient aspect of the research was the level of importance placed on energy conservation and the desire to conserve. The feedback given to the open ended questions was quite impressive regarding what employees have done and continue to do particularly within their homes to conserve energy. These findings brought about final recommendations that were in fact not expected but could significantly influence an increase in energy conservation at work by leveraging the existing desire to conserve which is a key component to decision making.

  4. US National energy policy: conservation and environment

    International Nuclear Information System (INIS)

    Michna, J.; Bednarz, L.M.

    2004-01-01

    The paper presents extracts from an extended review devoted to recent changes and current trends in the national energy policy pursued in the USA. In 2001 the President Bush proposed an energy strategy for the period to 2025 that would promote energy conservation, repair and expand energy infrastructure, and increase energy supply while protecting the environment. The material stresses the importance of a sound national energy policy addressing supply, energy distribution and conservation. Well - illustrated data are given on the energy production and consumption (total, per capita, per $, by category, by fuel, etc.) and on the emissions (by sector, by fuel, by region, etc.). Giving an accurate account of the current situation with energy in America and a vision of its development for the first quarter of our century, these data are helpful for analyzing the national energy policies in other countries, post - transitional included. (authors)

  5. Principles of the Energy Conservation Bill

    International Nuclear Information System (INIS)

    Zeman, J.

    1995-01-01

    The paper describes 21 principles of the draft Energy Conservation Bill. The principles lay down fundamental responsibilities of the government, the municipalities, business entities, citizens and power plants in the field of economical energy management. Included are principles to minimize energy consumption and to stimulate a reasonable energy management, the role of the energy distribution network, responsibilities of the central load dispatching center, and power plant output regulation schemes. (J.B.)

  6. Profit by conserving energy in your restaurant

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This manual is aimed at the Canadian restaurant sector with a view of promoting sound energy conservation practices. Monitoring is recommended to identify energy consumption and measure results of a conservation effects. These efforts can be done with respect to selection, operation, and maintenance of restaurant equipment used in food preparation, HVAC systems, refrigeration, water heating, and lighting. Overall building design and planning of new installations are also considered. 27 figs.

  7. Energy consumption and conservation, evaluation

    International Nuclear Information System (INIS)

    Acket, C.

    2006-04-01

    The energy consumption is increasing of more than 1% each year. It is necessary to slow down this growth and much better to inverse it. Observing the main consumption posts, energy saving is possible at short dated for the residential sector and medium and long dated for the transports and the industry. Anyway the individual behaviors are essential. The author presents the situation for each posts, providing data on the energy consumption and saving and recommendations. (A.L.B.)

  8. Governmental interventions in the energy market. Study of the Dutch level playing field for fossil fuels, renewable sources, nuclear energy and energy conservation

    International Nuclear Information System (INIS)

    De Visser, E.; Winkel, T.; De Jager, D.; De Vos, R.; Blom, M.; Afman, M.

    2011-06-01

    This study has made an inventory of 53 governmental interventions in the Dutch energy market. Moreover, the consequences for the playing field for fossil fuels, renewable sources, nuclear energy and energy saving have been quantified. It shows that the government still stimulates the use of energy and fossil fuels more than it stimulates use of renewable energy sources. Policy that focuses on decreasing the price differences between sustainable and fossil should therefore focus on the phase-out of this support and subsequently on bridging the remaining financial gap. [nl

  9. 75 FR 21981 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Science.gov (United States)

    2010-04-27

    ... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EE-2006-BT-STD-0129] RIN 1904-AA90 Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters Correction In rule document 2010-7611 beginning on page 20112 in the issue of Friday...

  10. Energy savings potential from energy-conserving irrigation systems

    Energy Technology Data Exchange (ETDEWEB)

    Wilfert, G.L.; Patton, W.P.; Harrer, B.J.; Clark, M.A.

    1982-11-01

    This report systematically compares, within a consistent framework, the technical and economic characteristics of energy-conserving irrigation systems with those of conventional irrigation systems and to determine total energy savings. Levelized annual costs of owning and operating both energy-conserving and conventional irrigation systems have been developed and compared for all 17 states to account for the differences in energy costs and irrigation conditions in each state. Market penetration of energy-conserving systems is assessed for those systems having lower levelized annual costs than conventional systems performing the same function. Annual energy savings were computed by matching the energy savings per system with an assumed maximum market penetration of 100 percent in those markets where the levelized annual costs of energy-conserving systems are lower than the levelized annual costs of conventional systems.

  11. Green Tribology Biomimetics, Energy Conservation and Sustainability

    CERN Document Server

    Bhushan, Bharat

    2012-01-01

    Tribology is the study of friction, wear and lubrication. Recently, the concept of “green tribology” as “the science and technology of the tribological aspects of ecological balance and of environmental and biological impacts” was introduced. The field of green tribology includes tribological technology that mimics living nature (biomimetic surfaces) and thus is expected to be environmentally friendly, the control of friction and wear that is of importance for energy conservation and conversion, environmental aspects of lubrication and surface modification techniques, and tribological aspects of green applications such as wind-power turbines or solar panels. This book is the first comprehensive volume on green tribology. The chapters are prepared by leading experts in their fields and cover such topics as biomimetics, environmentally friendly lubrication, tribology of wind turbines and renewable sources of energy, and ecological impact of new technologies of surface treatment.

  12. Labor and energy impacts of energy-conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Three papers are presented discussing the labor and energy impacts of energy-conservation measures, namely: Generation of the Industry/Occupation Wage Matrix and Related Matters, by Carole Green; Job Shifts from Energy Conservation (Salary Distribution Effects), by Robert A. Herendeen; and Energy and Labor Implication of Improving Thermal Integrity of New Houses, by John Joseph Nangle. A separate abstract was prepared for each paper.

  13. Energy conserving dehumidification of greenhouses

    NARCIS (Netherlands)

    Zwart, de H.F.

    2014-01-01

    As greenhouses become better insulated and increasingly airtight, the humidity of the inside air rises easily and may become unfavourably high. Therefore, most greenhouses frequently open their vents to remove the moisture excess. When heated, opening the vents will increase the energy consumption.

  14. Motivated creativity: A conservation of energy approach

    NARCIS (Netherlands)

    Roskes, M.

    2013-01-01

    This dissertation developed a novel conservation of energy principle to explain how approach and avoidance motivation influence performance. On the one hand, we showed that avoidance motivated people can excel when they are sufficiently stimulated to invest their energy and cognitive resources. This

  15. International energy conservation: comparative law and policy

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    Ernest C. Baynard III, in the Foreword to the conference, told of the purpose of the conference - to compare and discuss the policies and laws that highly industrialized nations have used and considered to meet the challenge of energy conservation. The following countries participated in the conference: U.K.; Australia; Federal Republic of Germany; Japan; France; Canada; Sweden; Italy; the Netherlands; and the U.S. The IEA and the Commission of the European Communities also participated. The conference format consisted of ministerial addresses to the conference, interspersed with panel discussions focusing on energy conservation in transportation, industry, agriculture, and utilities; residential, commercial, and industrial buildings; and emergency situations. There was also a panel discussion on the role of government in energy conservation and energy information collection. The panels were composed of participating countries' representatives. (MCW)

  16. Energy conservation. Federal shared energy savings contracting

    International Nuclear Information System (INIS)

    Fultz, Keith O.; Milans, Flora H.; Kirk, Roy J.; Welker, Robert A.; Sparling, William J.; Butler, Sharon E.; Irwin, Susan W.

    1989-04-01

    A number of impediments have discouraged federal agencies from using shared energy savings contracts. As of November 30, 1988, only two federal agencies - the U.S. Postal Service (USPS) and the Department of the Army -had awarded such contracts even though they can yield significant energy and cost savings. The three major impediments we identified were uncertainty about the applicability of a particular procurement policy and practice, lack of management incentives, and difficulty in measuring energy and cost savings. To address the first impediment, the Department of Energy (DOE) developed a manual on shared energy savings contracting. The second impediment was addressed when the 100th Congress authorized incentives for federal agencies to enter into shared savings contracts. DOE addressed the third impediment by developing a methodology for calculating energy consumption and cost savings. However, because of differing methodological preferences, this issue will need to be addressed on a contract-by-contract basis. Some state governments and private sector firms are using performance contracts to reduce energy costs in their buildings and facilities. We were able to identify six states that were using performance contracts. Five have established programs, and all six states have projects under contract. The seven energy service companies we contacted indicated interest in federal shared energy savings contracting

  17. Energy Conservation: Heating Navy Hangars

    Science.gov (United States)

    1984-07-01

    temperature, IF Tf Inside air temperature 1 foot above the floor, OF T. Inside design temperature, IF To Hot water temperature setpoint , OF TON Chiller ...systems capable of optimizing energy usage base-wide. An add-on to an existing large scale EMCS is probably the first preference, followed by single...the building comfort conditions are met during hours of building occupancy. 2. Optimized Start/Stop turns on equipment at the latest possible time and

  18. Energy conservation in electric distribution

    International Nuclear Information System (INIS)

    Lee, Chong-Jin.

    1994-01-01

    This paper discusses the potential for energy and power savings that exist in electric power delivery systems. These savings translate into significant financial and environmental benefits for electricity producers and consumers as well as for society in general. AlliedSignal's knowledge and perspectives on this topic are the result of discussions with hundreds of utility executives, government officials and other industry experts over the past decade in conjunction with marketing our Amorphous Metal technology for electric distribution transformers. Amorphous metal is a technology developed by AlliedSignal that significantly reduces the energy lost in electric distribution transformers at an incremental cost of just a few cents per kilo-Watt-hour. The purpose of this paper is to discuss: Amorphous Metal Alloy Technology; Energy Savings Opportunity; The Industrial Barriers and Remedies; Worldwide Demand; and A Low Risk Strategy. I wish this presentation will help KEPCO achieve their stated aims of ensuring sound development of the national economy and enhancement of public life through the economic and stable supply of electric power. AlliedSignal Korea Ltd. in conjunction with AlliedSignal Amorphous Metals in the U.S. are here to work with KEPCO, transformer manufacturers, industry, and government agencies to achieve greater efficiency in power distribution

  19. Consumer energy conservation policy. An analytical approach

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.

    1984-06-01

    To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programmes. The result of this analytical approach to conservation policy - economic stability and economic security - are goals well worth pursuing.

  20. Balancing act: Government roles in an energy conservation network

    NARCIS (Netherlands)

    Peterman, A.; Kourula, A.; Levitt, R.

    2014-01-01

    Government-led interorganizational alliance networks present a sensible opportunity to overcome many societal challenges through collaborative governance. In particular, few researchers have studied alliance networks in the field of energy conservation in commercial buildings—a sector with unique

  1. Calorimeter energy calibration using the energy conservation law

    Indian Academy of Sciences (India)

    A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution ...

  2. Advances in Energy Conservation of China Steel Industry

    Directory of Open Access Journals (Sweden)

    Wenqiang Sun

    2013-01-01

    Full Text Available The course, technical progresses, and achievements of energy conservation of China steel industry (CSI during 1980–2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011–2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years’ research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  3. Advances in energy conservation of China steel industry.

    Science.gov (United States)

    Sun, Wenqiang; Cai, Jiuju; Ye, Zhu

    2013-01-01

    The course, technical progresses, and achievements of energy conservation of China steel industry (CSI) during 1980-2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011-2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years' research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  4. Canada's voluntary industrial energy conservation programme

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Jr., C. A.

    1979-07-01

    The organization of the voluntary industrial energy conservation program is described. There are 15 industrial sectors in the program and the plan implemented by the sectors including individual companies, trade associations, industry task forces, task force coordinating committee, and government is described. Targets for attack are mainly housekeeping projects, energy efficiency in retrofitting, and new processes. Problems are identified. It is concluded that compiled total performance has essentially achieved its target of 12% improved energy efficiency two years ahead of schedule. (MCW)

  5. 77 FR 8525 - Energy Conservation Program: Energy Conservation Standards for Standby Mode and Off Mode for...

    Science.gov (United States)

    2012-02-14

    ... way of representing consumer NPV), and (2) the monetary value of the benefits of emission reductions... standards to the Nation (energy savings, positive NPV of consumer benefits, consumer LCC savings, and... and Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and...

  6. 75 FR 12144 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2010-03-15

    .... 1. Consensus Agreement On January 26, 2010, the Air-Conditioning, Heating and Refrigeration... subsections. B. History of the Standards Rulemaking for Residential Furnaces 1. Background Energy conservation... recommending minimum energy conservation standards for residential central air conditioners, heat pumps, and...

  7. 77 FR 10997 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction

    Science.gov (United States)

    2012-02-24

    ... Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction AGENCY: Office of... standards for distribution transformers. It was recently discovered that values in certain tables of the...,'' including distribution transformers. The Energy Policy Act of 1992 (EPACT 1992), Public Law 102-486, amended...

  8. Focus on energy conservation: a project list

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    The Urban Land Institute (ULI) has prepared the following list of outstanding energy conserving projects for the US Department of Energy. As requested by the Department, the list includes descriptions of land developments and individual buildings suggested by members of ULI and by other sources. The projects have been selected to exemplify the major energy saving techniques in use today, with emphasis on those strategies most significant for people engaged in the business of land development. To make the list a useful reference for developers and public officials, ULI has attempted to cover energy conservation in the broadest sense from overall site planning to the functioning of individual building components. Focusing too closely on the myriad types of hardware available has been avoided and examples of the basic considerations important to energy-conscious planning and design are provided. Details on some heating, ventilation and air conditioning systems are provided in order to acquaint readers with major innovations in the field.

  9. Energy conservation indicators. 1982 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B.

    1982-09-01

    A series of Energy Conservation Indicators were developed for the Department of Energy to assist in the evaluation of current and proposed conservation strategies. As descriptive statistics that signify current conditions and trends related to efficiency of energy use, indicators provide a way of measuring, monitoring, or inferring actual responses by consumers in markets for energy services. Related sets of indicators are presented in some 40 one-page indicator summaries. Indicators are shown graphically, followed by several paragraphs that explain their derivation and highlight key findings. Indicators are classified according to broad end-use sectors: Aggregate (economy), Residential, Commercial, Industrial, Transportation and Electric Utilities. In most cases annual time series information is presented covering the period 1960 through 1981.

  10. 77 FR 32307 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-05-31

    ... energy conservation standards for various consumer products and certain commercial and industrial... Efficiency Levels 5. Proprietary Designs 6. Reverse Engineering D. Markups Analysis E. Energy and Water Use... per-cycle hot water energy consumption; (2) the total weighted per-cycle machine electrical energy...

  11. Building Standards and Codes for Energy Conservation

    Science.gov (United States)

    Gross, James G.; Pierlert, James H.

    1977-01-01

    Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

  12. Avoidance Motivation and Conservation of Energy

    NARCIS (Netherlands)

    Roskes, Marieke; Elliot, Andrew J.; Nijstad, Bernard A.; De Dreu, Carsten K. W.

    Compared to approach motivation, avoidance motivation evokes vigilance, attention to detail, systematic information processing, and the recruitment of cognitive resources. From a conservation of energy perspective it follows that people would be reluctant to engage in the kind of effortful cognitive

  13. Avoidance motivation and conservation of energy

    NARCIS (Netherlands)

    Roskes, Marieke; Elliot, Andrew J.; Nijstad, Bernard A.; De Dreu, Carsten K W

    Compared to approach motivation, avoidance motivation evokes vigilance, attention to detail, systematic information processing, and the recruitment of cognitive resources. From a conservation of energy perspective it follows that people would be reluctant to engage in the kind of effortful cognitive

  14. French industry and the energy conservation challenge

    Energy Technology Data Exchange (ETDEWEB)

    Serpette, M.

    1979-07-01

    The general position of France and its energy conservation objectives; the action taken by the government to stimulate this policy; and government cooperation with industrial circles and the action of industry itself are discussed. It is observed that the potential for future energy savings are smaller in France than in other countries because consumptions are already down to minimal levels. Consumption patterns in France are illustrated. (MCW)

  15. Motivation: its role in energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J. E.; Kingsley, K. J.

    1979-07-01

    The program at International Kaiser Aluminum and Chemical Corporation to motivate people by emphasizing the importance of the individual to save energy is described. Three major areas of conservation in the industry considered important since they identify the different motivational approaches needed that are discussed are manufacture, recycling, and by conversion to energy saving products. The importance of communication, participation, and recognition are emphasized. (MCW)

  16. On energy conservation and energy research. Om energioekonomisering og energiforskning

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This report to the Storting (Parliament) is the third one on energy conservation during the last 10 years. As earlier, the report mainly treats the use of energy for stationary objects. The background for this report is, above all, the increased environmental requirements to the energy policy attached to the use of fossil fuels. The economic energy conservation potential of Norway is estimated on the basis of the present energy prices and available technology. For stationary energy use it amounts to ca 23 TWh, of which 16 TWh refer to electric power and 7 TWh to oil. Among the measures of the authorities to realize this potential, information about energy economy and energy technology is one of the most important. Other important measures are research and development activities as well as temporary arrangements for economic support. Energy conservation efforts, and efforts for a better environment should often be considered together, because higher energy efficiency in general can result in important positive environmental impacts. In the long term, the global enviromental problems may be the strongest motive power for an increased effort in energy conservation. 38 figs., 22 tabs.

  17. Energy Conservation Guidebook : to be Used in Conjunction with the Energy Conservation Policies October 1993.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1993-11-01

    This guidebook is an instrument for implementing BPA`s Energy Conservation Policies established through the concensus of the four Area Office Managers and the Assistant Administrator for the Office of Energy Resources. As technical support for, and elaboration of, the Energy Conservation Policies, the Guidebook follows the format of the Policies themselves. The Guidebook tackles each section of the Policies in order, again assigning roles and responsibilities where appropriate, enlarging on policy issues and, where appropriate, outlining data considerations. The sections in order are: conservation load reduction, cost-effectiveness limits, BA management targets, consumer contributions, utility contribution, program verification, and program evaluation.

  18. Energy consumption and conservation in food retailing

    International Nuclear Information System (INIS)

    Tassou, S.A.; Ge, Y.; Hadawey, A.; Marriott, D.

    2011-01-01

    The total annual CO 2 emissions associated with the energy consumption of the major retail food outlets in the UK amount to around 4.0 MtCO 2 . The energy consumption and emissions from supermarkets varies widely and can depend on many factors such as the type and size of the store, business and merchandising practices and refrigeration and environmental control systems used. This paper provides energy consumption data of a sample of 2570 retail food stores from a number of major retail food chains in the UK. The sample covers all major store categories from convenience stores to hypermarkets and includes approximately 30% of the total number of stores in the UK having a net sales area more than 280 m 2 . The data show a wide variability of energy intensity even within stores of the same retail chain. A power law can be used to describe the variation of the average electrical energy intensity of the stores in the sample with sales area. If the electrical intensity of the stores above the average is reduced to the average by energy conservation measures, annual energy savings of the order of 10% or 840 GWh can be achieved representing 355,000 tonnes annual reduction in CO 2 emissions. The paper also discusses the major energy consuming processes in retail food stores and identifies opportunities for energy savings. - Research highlights: → Energy consumption by supermarkets in the UK is significant and a wide variability exists between stores of similar size. → Energy conservation measures to reduce energy consumption of individual stores to the average can produce a0% energy savings. → Significant opportunities for energy savings exist from the integration of HVAC and refrigeration equipment.

  19. Consumer energy - conservation policy: an analytical approach

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.

    1984-06-01

    To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described, and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programs. The result of this analytical approach to conservation policy (economic stability and economic security) are goals well worth pursuing. 13 references, 2 tables.

  20. The use of conservation supply curves in energy policy and economic analysis: The case study of Thai cement industry

    International Nuclear Information System (INIS)

    Hasanbeigi, Ali; Menke, Christoph; Therdyothin, Apichit

    2010-01-01

    The cement industry is one of the largest energy-consuming industries in Thailand with high carbon dioxide (CO 2 ) emissions. Using a bottom-up electricity Conservation Supply Curve (CSC) model, the cost effective and the total technical electricity-efficiency potential for the Thai cement industry in 2008 is estimated to be about 265 and 1697 gigawatt-hours (GWh) which account for 8% and 51% of the total electricity used in the cement industry in 2005, respectively. The fuel CSC model shows the cost-effective fuel-efficiency potential to be 17,214 terajoules (TJ) and the total technical fuel-efficiency potential equal to 21,202 TJ, accounting for 16% and 19% of the total fuel used in cement industry in 2005, respectively. The economic analysis in this paper shows how the information from the CSCs can be used to calculate the present value (PV) of net cost savings over a period of time taking into account the energy price escalation rate. The results from the policy scenario analysis show that the most effective and efficient policy scenario is the introduction of an energy-related CO 2 tax for the cement industry under a voluntary agreement program. This scenario results in 16.9% primary energy-efficiency improvement over a 5-year implementation period.

  1. Marketing energy conservation options to Northwest manufactured home buyers

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, P.L.; Mohler, B.L.; Taylor, Z.T.; Lee, A.D.; Onisko, S.A.

    1985-06-01

    This study relies on extensive, existing survey data and new analyses to develop information that would help design a marketing plan to achieve energy conservation in new manufactured homes. Existing surveys present comprehensive information about regional manufactured home occupants and their homes that are relevant to a potential conservation marketing plan. An independent analysis of the cost-effectiveness of various efficiency improvements provides background information for designing a marketing plan. This analysis focuses on the economic impacts of alternative energy conservation options as perceived by the home owner. Identifying impediments to conservation investments is also very important in designing a marketing plan. A recent report suggests that financial constraints and the need for better information and knowledge about conservation pose the major conservation investment barriers. Since loan interest rates for new manufactured homes typically exceed site-built rates by a considerable amount and the buyers tend to have lower incomes, the economics of manufactured home conservation investments are likely to significantly influence their viability. Conservation information and its presentation directly influences the manufactured home buyer's decision. A marketing plan should address these impediments and their implications very clearly. Dealers express a belief that consumer satisfaction is the major advantage to selling energy efficient manufactured homes. This suggests that targeting dealers in a marketing plan and providing them direct information on consumers' indicated attitudes may be important. 74 refs.

  2. Department of Energy workshops on industrial energy conservation reporting

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Douglas G.

    1979-01-01

    A voluntary industrial energy-conservation program was initiated and now includes 50 trade organizations representing over 3,000 companies. Their current reporting system is an effort to respond to the Energy Policy and Conservation Act requirements, as now modified by the National Energy Conservation Policy Act. DOE's Office of Industrial Programs held six workshops in various key locations between November 1978 and February 1979 to enable energy managers to develop ideas and make suggestions that would improve the current and future energy-reporting programs. This report is a summary of the wide range of recommendations that the workshop participants offered as a means of meeting the NECPA requirements and the criticism of the current reporting program. It also reflects industry's views on potential approaches to future reporting. (MCW)

  3. 76 FR 70547 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-11-14

    ... the term ``fluorescent lamp,'' which EPCA defines as ``a low pressure mercury electric-discharge... discharge into light,'' and as including the four enumerated types of fluorescent lamps for which EPCA... Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts; Final Rule #0;#0;Federal...

  4. 78 FR 25626 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Science.gov (United States)

    2013-05-02

    ... Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans and Ceiling Fan... for residential ceiling fans and ceiling fan light kits in the Federal Register. This document... other aspect of the rulemaking for ceiling fans and ceiling fan light kits. The comment period is...

  5. Energy Conservation In Compressed Air Systems

    International Nuclear Information System (INIS)

    Yusuf, I.Y.; Dewu, B.B.M.

    2004-01-01

    Compressed air is an essential utility that accounts for a substantial part of the electricity consumption (bill) in most industrial plants. Although the general saying Air is free of charge is not true for compressed air, the utility's cost is not accorded the rightful importance due to its by most industries. The paper will show that the cost of 1 unit of energy in the form of compressed air is at least 5 times the cost electricity (energy input) required to produce it. The paper will also provide energy conservation tips in compressed air systems

  6. Energy conservation by reducing process variability

    Energy Technology Data Exchange (ETDEWEB)

    Wising, Ulrika; Lafourcade, Sebastien [Pepite S.A., Liege (Belgium); Mack, Philippe [Pepite Technologies Inc., Montreal (Canada)

    2011-12-21

    Energy conservation is becoming an increasingly important instrument to stay competitive in today is increasingly global market. Important investments have been made in infrastructure and personnel in order to improve the management of energy such as increased metering, energy dashboards, energy managers, etc. Despite these investments, the results have not materialized and there is still a significant potential to further reduce energy consumption. In this paper a new methodology will be presented that helps industry better operate existing assets in order to reduce energy consumption, without having to make capital investments. The methodology uses a combination of advanced data analysis tools and a specific implementation scheme that has lead to significant savings in industry. The advanced data analysis tools are used to analyze the variability of the process in order to assess when the plant has been operated well or not so well in the past. By finding the root causes of these variations and the key variables that can explain them, improved operating guidelines and models can be developed and implemented. The specific implementation scheme is an important part of the methodology as it involves the people operating the plant. Several user cases will be presented showing an energy conservation of between 10%-20% without capital investments necessary. (author)

  7. A Study on an Energy Conservation and Interconnection Scheme between WSN and Internet Based on the 6LoWPAN

    Directory of Open Access Journals (Sweden)

    Runtong Zhang

    2015-01-01

    Full Text Available Wireless sensor network (WSN, which has broad application prospects, consists of small nodes with sensing, computation, and communications capabilities. IPv6 is used over low power WPAN (wireless personal area network which is run by 6LoWPAN technology on the LoWPAN devices. In order to establish seamless connection of two heterogeneous networks, that is, WSN and IPv6 network, this paper proposes an improved energy conservation and interconnection scheme (ECIS based on the analysis of the current schemes. Detailed design of each functional component in the new scheme is proposed, and an expansion of the SSCS module in NS2 802.15.4 simulator is examined. Comprehensive experiments on the simulation platform show that the newly proposed scheme is advantageous over existing results.

  8. 76 FR 52852 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-08-24

    ... INFORMATION CONTACT: Stephen L. Witkowski, U.S. Department of Energy, Office of Energy Efficiency and...-0121, (202) 586-7463, e-mail: stephen[email protected] . Ms. Elizabeth Kohl, U.S. Department of... paragraphs (b) and (h) to read as follows: Sec. 430.32 Energy and water conservation standards and their...

  9. Energy conservation in ethanol production from renewable resources and non-petroleum energy sources

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-01

    The dry milling process for the conversion of grain to fuel ethanol is reviewed for the application of energy conservation technology, which will reduce the energy consumption to 70,000 Btu per gallon, a reduction of 42% from a distilled spirits process. Specific energy conservation technology applications are outlined and guidelines for the owner/engineer for fuel ethanol plants to consider in the selection on the basis of energy conservation economics of processing steps and equipment are provided. The process was divided into 5 sections and the energy consumed in each step was determined based on 3 sets of conditions; a conventional distilled spirits process; a modern process incorporating commercially proven energy conservation; and a second generation process incorporating advanced conservation technologies which have not yet been proven. Steps discussed are mash preparation and cooking, fermentation, distillation, and distillers dried grains processing. The economics of cogeneration of electricity on fuel ethanol plants is also studied. (MCW)

  10. Consumer energy conservation options - professional and consumer perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, B.J.R.; Claxton, J.D.; McDougall, G.H.G.

    1980-01-01

    The objectives of this study were to: identify government policies for reducing Canadian consumption of home heating fuel, electricity, and gasoline; assess probable effectiveness of different policy alternatives as a means of reducing consumer energy consumption; and measure the acceptability to Canadian consumers of the different policy alternatives. Interviews were conducted with energy conservation professionals to identify and evaluate existing energy conservation programs, and interviews were conducted with consumers who had evaluated selected programs previously reviewed by the professionals. Information was also gathered on energy conservation activities of consumers surveyed. A directory of 34 energy conservation programs was also compiled. Some of the conclusions reached in this report are as follows. There is a need for an information system to gather data on existing conservation programs in order to increase the knowledge of relevant parties as to the outcomes of operating programs. This would help evaluation and improvement of current programs and suggest new program possibilities. The professionals rated six of the 34 programs highly, including the Energuide and the Canadian Home Insulation Program (CHIP). Retrofitting programs for houses are recommended for continuation and expansion, with some consideration given to linking these kinds of programs with home audit programs. In the private transport sector, any new conservation programs should be thoroughly tested on a small scale before widespread implementation, as evidence indicates that certain programs favorably evaluated by professionals may not be received favorably by consumers. 3 refs., 24 tabs.

  11. A compendium of energy conservation: Success stories 90

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  12. A Compendium of Energy Conservation: Success Stories 90

    Science.gov (United States)

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R&D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  13. Annotated directory of energy conservation programs

    Energy Technology Data Exchange (ETDEWEB)

    Claxton, J.D.; McDougall, G.H.G.; Ritchie, J.R.B. (eds.)

    1980-01-01

    Summaries of 34 consumer energy conservation programs in Canada and the USA are listed. Areas of focus are: (1) home heating and cooling; (2) household appliances; (3) private transportation; and (4) community involvement. Each summary contains information on the program objectives, operating details, results to date, costs and benefits, and source of funding. The key contact person is identified and background literature references are given. ((MJJ)

  14. FY 1999 report on basic survey project for joint implementations, etc. Feasibility study on energy conservation at Norsi Refinery

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This project is to link in the future to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementations, etc. Taken up in this survey are a topping unit, vacuum distillation unit, catalytic reforming unit, and a middle cut desulfurization unit. The purpose of the refurbishment is to conserve energy. It is estimated that 48000 TOE/year of energy will be saved and that there will be a 1.2-million tons-CO2/year reduction in greenhouse gas emissions. It is predicted that an amount equivalent to 1.3% of Russia's 1997 oil consumption will be saved across Russia and that there will be a greenhouse gas reduction equivalent to 8.8% of what Japan plans to reduce. The main problem to solve before execution of this project is in the raising of funds. Although Russia hopes that Japan will invest in the project, such at the present stage will be a high-risk venture now that the Russian economic situation and the details (CO2 emission trading, etc.) of its joint implementation framework are not yet definite. The reasonable way for Japan to follow will be to support Russia as a buyer using credits with Russia acting as the principle party. (NEDO)

  15. FY 1999 report on basic survey project for joint implementations, etc. Feasibility study on energy conservation at Norsi Refinery

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This project is to link in the future to COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change) joint implementations, etc. Taken up in this survey are a topping unit, vacuum distillation unit, catalytic reforming unit, and a middle cut desulfurization unit. The purpose of the refurbishment is to conserve energy. It is estimated that 48000 TOE/year of energy will be saved and that there will be a 1.2-million tons-CO2/year reduction in greenhouse gas emissions. It is predicted that an amount equivalent to 1.3% of Russia's 1997 oil consumption will be saved across Russia and that there will be a greenhouse gas reduction equivalent to 8.8% of what Japan plans to reduce. The main problem to solve before execution of this project is in the raising of funds. Although Russia hopes that Japan will invest in the project, such at the present stage will be a high-risk venture now that the Russian economic situation and the details (CO2 emission trading, etc.) of its joint implementation framework are not yet definite. The reasonable way for Japan to follow will be to support Russia as a buyer using credits with Russia acting as the principle party. (NEDO)

  16. Conservation of topological quantum numbers in energy bands

    International Nuclear Information System (INIS)

    Chang, L.N.; Liang, Y.

    1988-01-01

    Quantum systems described by parametrized Hamiltinians are studied in a general context. Within this context, the classification scheme of Avron-Seiler-Simon for non-degenerate energy bands is extended to cover general parameter spaces, whole their sum rule is generalized to cover cases with degenerate bands as well. Additive topological quantum numbers are defined, and these are shown to be conserved in energy band ''collisions''. The conservation laws dictate that when some invariants are non-vanishing, no energy gap can develop in a set of degenerate bands. This gives rise to a series of splitting rules

  17. Energy conservation achievements by New Shorrock Mills, Ahmedabad

    International Nuclear Information System (INIS)

    Rawal, N.L.; Trivedi, R.M.

    1994-01-01

    The New Shorrock Mills, Ahmedabad is a textile mill manufacturing cloth. Managerial practices like energy auditing and energy conservation monitoring introduced to conserve energy are described. Various measures implemented to conserve energy in machines power; carding, winding, warping and sizing operations; auto looms and lighting power are described. Cost reduction in terms of rupees is given. (N.B.)

  18. Energy conservation and the principle of equivalence

    International Nuclear Information System (INIS)

    Haugan, M.P.

    1979-01-01

    If the equivalence principle is violated, then observers performing local experiments can detect effects due to their position in an external gravitational environment (preferred-location effects) or can detect effects due to their velocity through some preferred frame (preferred frame effects). We show that the principle of energy conservation implies a quantitative connection between such effects and structure-dependence of the gravitational acceleration of test bodies (violation of the Weak Equivalence Principle). We analyze this connection within a general theoretical framework that encompasses both non-gravitational local experiments and test bodies as well as gravitational experiments and test bodies, and we use it to discuss specific experimental tests of the equivalence principle, including non-gravitational tests such as gravitational redshift experiments, Eoetvoes experiments, the Hughes-Drever experiment, and the Turner-Hill experiment, and gravitational tests such as the lunar-laser-ranging ''Eoetvoes'' experiment, and measurements of anisotropies and variations in the gravitational constant. This framework is illustrated by analyses within two theoretical formalisms for studying gravitational theories: the PPN formalism, which deals with the motion of gravitating bodies within metric theories of gravity, and the THepsilonμ formalism that deals with the motion of charged particles within all metric theories and a broad class of non-metric theories of gravity

  19. Pollution prevention and energy conservation: Understanding the interactions

    International Nuclear Information System (INIS)

    Purcell, A.H.

    1992-01-01

    The traditional view holds that pollution prevention is good for energy conservation and vice versa. Analysis of pollution prevention and energy conservation activities indicates, however, that interactions and synergies between environmental and energy factors can mean that pollution prevention can be energy intensive and, conversely, that energy conservation can lead to increased pollution. Full cost accounting, taking into account all media, must be performed before precise pollution prevention-energy conservation interrelationships can be characterized and quantified. Use of a pollution prevention-energy conservation matrix can further this understanding

  20. 76 FR 43941 - Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment

    Science.gov (United States)

    2011-07-22

    ... included the HPBA membership directory, Air-Conditioning, Heating, and Refrigeration Institute (AHRI.... Summary of the Proposed Rule II. History of the Energy Conservation Standards Rulemaking and Current... notice. DOE's rationale is presented in further detail immediately below. II. History of the Energy...

  1. Seeding Social Norms about Energy Conservation among Girl Scouts

    Science.gov (United States)

    Bernstein, Debra; Puttick, Gillian

    2014-01-01

    Three studies examined whether a social norm message (SNM) to Girl Scouts who had completed an energy conservation program would impact behavior and attitudes. Studies 1 and 2 were conducted with girls recently completing the program, study 3 was conducted with girls completing the program one year earlier. Results suggest that the SNM may impact…

  2. Energy conservation potential in Taiwanese textile industry

    International Nuclear Information System (INIS)

    Hong, Gui-Bing; Su, Te-Li; Lee, Jenq-Daw; Hsu, Tsung-Chi; Chen, Hua-Wei

    2010-01-01

    Since Taiwan lacks sufficient self-produced energy, increasing energy efficiency and energy savings are essential aspects of Taiwan's energy policy. This work summarizes the energy savings implemented by 303 firms in Taiwan's textile industry from the on-line Energy Declaration System in 2008. It was found that the total implemented energy savings amounted to 46,074 ton of oil equivalent (TOE). The energy saving was equivalent to 94,614 MWh of electricity, 23,686 kl of fuel oil and 4887 ton of fuel coal. It represented a potential reduction of 143,669 ton in carbon dioxide emissions, equivalent to the annual carbon dioxide absorption capacity of a 3848 ha plantation forest. This study summarizes energy-saving measures for energy users and identifies the areas for making energy saving to provide an energy efficiency baseline.

  3. FY 2000 survey report on the project for preparation of the international energy utilization rationalization basis. 1st volume. Survey/study for the spread of energy conservation technology; 2000 nendo chosa hokokusho. Kokusai energy shiyo gorika kiban seibi jigyo (Sho energy gijutsu no fukyu no tameno chosa kenkyu to - 1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In China which is the largest energy consumption country in the Asian region and has much room for the spread of energy conservation technology, investigational study was made with the aim of widely spreading energy conservation technology and solving environmental problems. To grasp energy supply/demand in China, environmental problems, industrial structure and social system, it is necessary to have process for establishment of data monitoring method, construction of database and model simulation. Proposal for model simulation was made. Further, to make macro-basis assessment of potentiality of energy conservation and environmental effect by sector in China, following the previous fiscal year, study was made on the electric power industry, where there is big potentiality of heightening energy utilization efficiency but the rationalization is not proceeded with. Moreover, in this fiscal year, energy demand is expected to increase with the growing economy, and the traffic field which has a great effect on the environment was added to the investigational research. (NEDO)

  4. Energy conservation from a consumer perspective. Institut fuer marketing der Universitaet Muenster, Arbeitspapiere

    Energy Technology Data Exchange (ETDEWEB)

    Katz, R

    1980-01-01

    A survey of the standard of energy research in the American Literature on consumer behaviour is given. After the discussion of the importance of consumer research for energy conservation the difficulties on determining ''energy conservation behaviour'' are described. Moreover, the study compiles past American Literature that has tried to explain energy conservation behaviour. A further chapter analyzes measures of influencing the consumer energy conservation behaviour carried out so far in the United States and Canada. Finally, still open problems in future American energy conservation research in the field of consumer behaviour are demonstrated.

  5. Study of behavior incentive mechanism of energy conservation and emission reduction for China freshwater live fish supply chain

    Energy Technology Data Exchange (ETDEWEB)

    Liming, C.; Fengjun, L.; Xiaohong, L.

    2016-07-01

    The purpose of this paper investigates the subject behavior of Energy conservation and emission reduction (ECER) based on structured classification of the organization types of FLF supply chain, and explores reasonable behavior incentive mechanism for ECER of FLF supply chain in China. Design/methodology/approach: This paper classifies the organization subjects of FLF supply chain, and different characteristics of organization subjects are compared in detail. ECER behavior incentive mechanism modeling of FLF supply chain is explored by taking advantage of principal-agent model in view of asymmetry information. Incentives issue of different operating subjects is discussed as enlightenment of the model. Findings: Three types of the organization subjects of FLF supply chain in China have been identified as: loose organization, semi-compact organization and compact organization.Subjects of different types have different abilities to conduct ECER work. Government needs to propose differentiation polices of incentive compensation for different operating subjects, widen the gap of differentiated subsidies/rewards for different investment levels on ECER conducted by different operating subjects of FLF supply chain. Research limitations/implications: It will take long-term unremitting efforts to achieve the target of ECER work for FLF supply chain in China, the dynamic issues and simulation modeling on behavior incentive mechanism of ECER should be developed in future research. Practical implications: Clear understanding of structured classification of the organization subject types of FLF supply chain and the behavior incentive mechanism for ECER, will help government to improve the ECER work in an efficient and effective way... (Author)

  6. Study of behavior incentive mechanism of energy conservation and emission reduction for China freshwater live fish supply chain

    Directory of Open Access Journals (Sweden)

    Liming Chen

    2016-02-01

    Full Text Available Purpose: The purpose of this paper investigates the subject behavior of Energy conservation and emission reduction (ECER based on structured classification of the organization types of FLF supply chain, and explores reasonable behavior incentive mechanism for ECER of FLF supply chain in China. Design/methodology/approach: This paper classifies the organization subjects of FLF supply chain, and different characteristics of organization subjects are compared in detail. ECER behavior incentive mechanism modeling of FLF supply chain is explored by taking advantage of principal-agent model in view of asymmetry information. Incentives issue of different operating subjects is discussed as enlightenment of the model. Findings: Three types of the organization subjects of FLF supply chain in China have been identified as: loose organization, semi-compact organization and compact organization.Subjects of different types have different abilities to conduct ECER work. Government needs to propose differentiation polices of incentive compensation for different operating subjects, widen the gap of differentiated subsidies/rewards for different investment levels on ECER conducted by different operating subjects of FLF supply chain. Research limitations/implications: It will take long-term unremitting efforts to achieve the target of ECER work for FLF supply chain in China, the dynamic issues and simulation modeling on behavior incentive mechanism of ECER should be developed in future research. Practical implications: Clear understanding of structured classification of the organization subject types of FLF supply chain and the behavior incentive mechanism for ECER, will help government to improve the ECER work in an efficient and effective way. Originality/value: Research to behavior incentive mechanism of ECER has important theoretical value and practical significance. This paper contributes to distinguish three types of operating subjects of FLF supply chain in

  7. Electrorheology for energy production and conservation

    Science.gov (United States)

    Huang, Ke

    Recently, based on the physics of viscosity, we developed a new technology, which utilizes electric or magnetic fields to change the rheology of complex fluids to reduce the viscosity, while keeping the temperature unchanged. The method is universal and applicable to all complex fluids with suspended particles of nano-meter, submicrometer, or micrometer size. Completely different from the traditional viscosity reduction method, raising the temperature, this technology is energy-efficient, as it only requires small amount of energy to aggregate the suspended particles. In this thesis, we will first discuss this new technology in detail, both in theory and practice. Then, we will report applications of our technology to energy science research. Presently, 80% of all energy sources are liquid fuels. The viscosity of liquid fuels plays an important role in energy production and energy conservation. With an electric field, we can reduce the viscosity of asphalt-based crude oil. This is important and useful for heavy crude oil and off-shore crude oil production and transportation. Especially, since there is no practical way to raise the temperature of crude oil inside the deepwater pipelines, our technology may play a key role in future off-shore crude oil production. Electrorehology can also be used to reduce the viscosity of refinery fuels, such as diesel fuel and gasoline. When we apply this technology to fuel injection, the fuel droplets in the fuel atomization become smaller, leading to faster combustion in the engine chambers. As the fuel efficiency of internal combustion engines depends on the combustion speed and timing, the fast combustion produces much higher fuel efficiency. Therefore, adding our technology on existing engines improves the engine efficiency significantly. A theoretical model for the engine combustion, which explains how fast combustion improves the engine efficiency, is also presented in the thesis. As energy is the key to our national

  8. The status of energy conservation in Taiwan's cement industry

    International Nuclear Information System (INIS)

    Su, Te-Li; Chan, David Yih-Liang; Hung, Ching-Yuan; Hong, Gui-Bing

    2013-01-01

    The cement industry represents one of the most energy intensive sectors in Taiwan. Energy audits are the direct tools which are employed to help reduce energy consumption. The objectives of energy audits are to establish energy audit systems, provide on-site energy audit service and reduce production cost. This study summarized the energy savings implemented in Taiwan's cement industry; the data were obtained from the on-line Energy Declaration System in 2010. The total implemented energy savings amounted to 68,512 kilo liter of crude oil equivalent (KLOE). The energy audit group audited seven Taiwanese cement plants in 2011 and revealed an energy saving potential of 2571.6 MWh of electricity and 1002.8 KLOE of thermal energy. The total potential energy saving was 1708.5 KL of crude oil equivalent (KLOE), equivalent to a 4560 t reduction in CO 2 emissions, representing the annual CO 2 absorption capacity of a 122 ha forest plantation. - Highlights: • This study summarizes the energy savings implemented in Taiwan's cement industry from the on-line Energy Declaration System. • The energy audit group audited seven Taiwanese cement plants in 2011 and revealed energy saving potential was 1708.5 KLOE. • This work aims to examine what Taiwan has done and also describes the current status in cement industry. • In addition, some potential energy conservation opportunities or measures are revealed in this paper

  9. 76 FR 45606 - Desert Renewable Energy Conservation Plan, Habitat Conservation Plan and Possible Land Use Plan...

    Science.gov (United States)

    2011-07-29

    ...-N131; 80221-1112-80221-F2] Desert Renewable Energy Conservation Plan, Habitat Conservation Plan and Possible Land Use Plan Amendment, Southern California: Environmental Impact Statement AGENCY: Fish and..., as amended, for the proposed Desert Renewable Energy Conservation Plan (DRECP). The EIS will be a...

  10. The role of energy conservation in the BFKL equation

    International Nuclear Information System (INIS)

    Forshaw, J.R.; Harriman, P.N.; Sutton, P.J.

    1993-01-01

    We study a modification to the BFKL equation at zero momentum transfer due to the imposition of energy conservation. The significance of our modification, which enters in the form of an ultraviolet cutoff, is illustrated directly and is discussed within the context of the gluon diffusion in k T . (Author)

  11. Strategies to enhance waste minimization and energy conservation within organizations: a case study from the UK construction sector.

    Science.gov (United States)

    Jones, Jo; Jackson, Janet; Tudor, Terry; Bates, Margaret

    2012-09-01

    Strategies for enhancing environmental management are a key focus for the government in the UK. Using a manufacturing company from the construction sector as a case study, this paper evaluates selected interventionist techniques, including environmental teams, awareness raising and staff training to improve environmental performance. The study employed a range of methods including questionnaire surveys and audits of energy consumption and generation of waste to examine the outcomes of the selected techniques. The results suggest that initially environmental management was not a focus for either the employees or the company. However, as a result of employing the techniques, the company was able to reduce energy consumption, increase recycling rates and achieve costs savings in excess of £132,000.

  12. Conservation and energy efficiency plan 2006

    International Nuclear Information System (INIS)

    2005-11-01

    This plan outlined details of Nova Scotia's proposed $5 million incremental investment in energy efficiency and conservation measures in 2006. The plan was developed through consultation with various Canadian utilities, customers and external stakeholders. A team of stakeholders identified lighting, pricing, partnerships and education as opportunities offering the greatest potential for results. Market research was conducted to identify market potential and the identification of barriers to customer adoption of programs as well as customer expectations regarding program implementation. It was anticipated that the plan will reduce electricity usage and result in significant savings for customers, as well as reducing greenhouse gas (GHG) emissions. The aim of the plan is to help build a conservation and energy efficiency culture in Nova Scotia and to bring Nova Scotia Power together with community-based partners. Specific plans for 2007 included: a 72 GWh reduction in annual electricity usage; approximately $7.7 million in annual savings to customers; a 16 MW reduction in peak electricity demand; and a 50 thousand tonne reduction of GHGs. A business case was presented along with details of proposed residential, commercial and industrial programs. A cost benefit analysis was provided, as well as an outline of the plan's budget and organizational structure. It was concluded that the success of the various program elements will be based on quantitative and qualitative data on the actual effect on energy use of each customer sector, as well as its effect on system demand profiles. Data will be collected through the use of customer surveys, questionnaires, and direct feedback from partners, educators and manufactures and suppliers. 11 tabs., 16 figs

  13. Energy management for the future. A sourcebook of ideas and activities for energy conservation learning programs

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This book serves as a teaching aid for Canadian school programs in energy conservation and energy management. Suitable curriculum areas and objectives are outlined, and suggestions are presented for organizing thematic study units. References are made throughout to appropriate use of additional media such as filmstrips. Five study units, each with its own classroom activities, are detailed: energy resources, energy and the home, energy and food, energy and leisure, and energy in transportation. Suggestions are given for ongoing energy management educational programs to be tried out once the study units have been completed. 23 figs.

  14. Energy conservation and dust production in wet rotary cement kilns

    Energy Technology Data Exchange (ETDEWEB)

    Sell, N J; Fischbach, F A

    1976-12-01

    Energy conservation is currently a major concern of the cement industry. A comparison of data supplied by the U.S. Federal Energy Administration with that gathered in an extensive private study incorporating 29 wet cement plants indicates that a significant reduction of the energy consumed can be accomplished by decreasing the amount of dust generated in the process. Energy saving of 8 percent through dust suppression appears possible by increasing the slurry moisture and by using hammermills rather than impactors as the crushing technique.

  15. Encouraging energy conservation in multifamily housing: RUBS and other methods of allocating energy costs to residents

    Energy Technology Data Exchange (ETDEWEB)

    McClelland, L

    1980-10-01

    Methods of encouraging energy conservation in multifamily housing by allocating energy costs to residents are discussed; specifically, methods appropriate for use in master metered buildings without equipment to monitor energy consumption in individual apartments are examined. Several devices available for monitoring individual energy consumption are also discussed plus methods of comparing the energy savings and cost effectiveness of monitoring devices with those of other means of promoting conservation. Specific information in Volume I includes a comparison study on energy use in master and individually metered buildings; types of appropriate conservation programs for master metered buildings; a description of the Resident Utility Billing System (RUBS); energy savings associated with RUBS; Resident reactions to RUBS; cost effectiveness of RUBS for property owners; potential abuses, factors limiting widespread use, and legal status of RUBS. Part I of Volume II contains a cost allocation decision guide and Part II in Volume II presents the RUBS Operations Manual. Pertinent appendices to some chapters are attached. (MCW)

  16. Energy conservation on Nova Scotia farms: Baseline energy data

    International Nuclear Information System (INIS)

    Bailey, J.A.; Gordon, R.; Burton, D.; Yiridoe, E.K.

    2008-01-01

    Direct energy use is a small but essential component of the farm greenhouse gas (GHG) budget. Improvements in energy efficiency and renewable energy can help reduce farm operating costs, improve air quality and reduce GHG emission levels. Energy conservation is especially important in Nova Scotia (NS), Canada, where fossil fuels, particularly coal, remain the primary source of electrical generation. Responses from mail surveys were used to establish baseline data on a cross-section of NS farms with respect to direct energy costs and usage to demonstrate differences in farm type and size. A 32% (N=224) response rate was achieved. Based on this survey, the average energy bill for a NS farm in 2004 was $11,228, with most (61.7%) of their energy cost attributable to the purchase of petroleum products. Almost all farmers (96.4%) indicated that their energy cost was a primary concern. Farmers identified the operation of vehicles and mobile equipment, as well as lighting and heating as having the greatest energy requirements in their operations. Energy usage varied with farm type and size. NS farms consumed 1.2 petajoules of energy equivalent to 127 kilotonnes of CO 2 with 52.7% of emissions from electricity use in 2004

  17. An analysis of energy conservation measure costs

    International Nuclear Information System (INIS)

    Jones, R.; Ellis, R.; Gellineau, D.

    1990-01-01

    This paper reports on a Denver Support Office project to evaluate cost estimation in the Institutional Conservation Program. Unit cost characteristics and cost prediction accuracy were evaluated from 1,721 Energy Conservation Measures (ECMs) and 390 Technical Assistance (TA) reports funded in the last six years. This information is especially useful to state and DOE review engineers in determining the reasonableness of future cost estimates. The estimated cost provisions for TA report grants were generally adequate to cover the actual costs. Individually, there was a tendency for TA reports to cost less than estimated by about 10%. TA report unit costs averaged $.09 to $.11 per square foot, and decreased as the building size increased. Individually, there was a tendency for ECMs to cost more than estimated by about 17%. Overall, the estimated costs of the 1,721 measures were $20.4 minion, while the actual costs were $21.4 million. This 4.6% difference indicates that, overall, ECM cost estimates have provided a reasonable basis for grant awards. There was a high variation in ECM unit costs. The data did not support speculation that there is a tendency to manipulate cost estimates to fit ECMs within the simple payback eligibility criteria of 2 to 10 years

  18. Energy Conservation, Understanding and Activities for Young People.

    Science.gov (United States)

    Federal Energy Administration, Washington, DC.

    This publication on energy conservation is designed as a resource material for the classroom. It is divided into three chapters concerning a definition of energy, the conservation of energy, and the uses of energy. For each subtopic within the chapters, there is background information and suggested project topics designed for secondary school…

  19. Energy conservation status in Taiwanese food industry

    International Nuclear Information System (INIS)

    Ma, Chih-Ming; Chen, Ming-Hue; Hong, Gui-Bing

    2012-01-01

    The food industry in Taiwan is labor intensive, the cost of raw materials is high, and there is much product diversification. Although this industry is primarily small and medium scale, it is a large user of electricity in Taiwan's manufacturing sector. The concentration of greenhouse gases (GHGs) from manufacturing activities and vehicle emissions has increased remarkably. Energy audits are a basic and direct means by which energy efficiency can be improved, energy consumption reduced, and carbon dioxide emissions inhibited. This work summarizes the energy saving potential of 76 firms and the energy savings implemented by 23 firms as determined by energy audit tracking and from the on-line energy declaration system in Taiwan's food industry. The results of this study can serve as a benchmark for developing a quantified list in terms of potential energy savings and opportunities for improving the efficiency of the food industry. - Highlights: ► This work summarizes the energy saving potential and the energy savings implemented in food industry. ► The results of this study can serve as a benchmark for developing a quantified list in terms of potential energy savings. ► The opportunities for improving the efficiency of the food industry can be a reference.

  20. Daylighting for energy conservation in an existing building under tropical climate conditions: a case study of Lai Sue Thai building Ramkhamhaeng University

    Directory of Open Access Journals (Sweden)

    Lerdlekha Tanachaikhan

    2015-12-01

    Full Text Available Daylighting using skylight has been shown to have a high potential in reducing electrical lighting energy, and could provide a more pleasant atmosphere of a daylit space. However, in hot climates, the main constraint of daylighting is the solar heat gain that contributes to major heat load for an air-conditioning system. If the balance between the beneficial light gain used to offset lighting energy requirement and heat gain from daylight is well considered, significant energy savings can be obtained. The main objective of the study is to evaluate the potential of daylighting for energy conservation in the tropics through theoretical analysis (simulation study and experimental observation. Lai Sue Thai Building (an existing and educational building located at Ramkhamkaeng University was selected as a case study. From analysis, use of daylight could reduce electrical energy in this building by up to 76% compared to the initial condition where fully lighting was supplied. Window orientation would also play an important role. Moreover, heat gain through windows due to daylighting can be controlled by overhangs and the appropriate Window-to-Wall ratio that would be about 30% for this building. An experimental study was also carried out to validate the results in a selected room. About 49% and 37% of Relative Root Mean Square Error (RRMSE were observed in light and heat measurements, respectively

  1. Energy conservation and pomeron loops in high energy evolution

    International Nuclear Information System (INIS)

    Gustafson, Goesta

    2007-01-01

    We present a formalism which modifies the Mueller Dipole Model such that it incorporates energy-momentum conservation as well as important colour suppressed effects in the cascade evolution. The formalism is implemented in a Monte Carlo simulation program, and the results are compared to inclusive data from HERA and the Tevatron. We here find a generally very good agreement between our model and the experimental data. (author)

  2. Energy Conservation and Passive Solar Techniques in Campus Renovation.

    Science.gov (United States)

    Probasco, Jack; And Others

    1981-01-01

    The analysis of a building from an energy conservation and passive solar potential has three aspects: building envelope, landscaping, and room utilization. Typical conservation and solar control modifications are listed. (Author/MLF)

  3. Promotional study for joint implementation program. Energy conservation and efficiency improvement for district heating system in Tashkent, Uzbekistan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of reducing greenhouse effect gas emissions, a study was carried out for repair/improvement of the district heating system in Tashkent City, the Republic of Uzbekistan. In the project, the following were studied: heightening of electrical insulation of the total pipeline, improvement in efficient utilization of heat energy in the thermal plant. As to the existing pipeline, heat loss is improved by 0-5% by changing it to electrical insulation pipe. In relation to the thermal plant, studied were cogeneration facility A using three 4MW gas turbines and combined cycle cogeneration facility B using two 40MW gas turbines. As a result, the amount of energy saving was 11,370 toe/y in pipeline, 12,750 toe/y in facility A and 69,000 toe/y in facility B. Further, the reduction amount of greenhouse effect gas emissions was 27,200t-CO2/y in pipeline, 30,500t-CO2/y in facility A and 164,900t-CO2/y in facility B. (NEDO)

  4. Business cycle and economic-wide energy intensity: The implications for energy conservation policy in Algeria

    International Nuclear Information System (INIS)

    Adom, Philip Kofi

    2015-01-01

    Despite the prevalence of voluntary and involuntary energy conservation policies, developing countries in Africa continue to struggle to achieve energy efficiency targets. Consequently, energy intensity levels have risen threatening the security of the energy system. This raises the important question: is there an economic state that induces agents to be energy conscious? In this study, we study the case of Algeria's energy intensity from 1971 to 2010. First, the paper argues that there is a certain economic state that economic agents find investing in energy conservation a viable option. Any state different from that would mean not investing in energy conservation. Second, the paper argues that the economy can do better even with an infinitesimal reduction in fuel subsidy, and that the gains in revenue from the policy can compensate for the negative socio-economic and equity impacts associated with such a policy. Third, the paper argues that, so long as, industrial expansion in the country move parallel with investment in technological innovation, long-term sustainable growth and energy conservation targets are jointly feasible. Fourth, the paper shows that income elasticity evolves with the business cycle, and the absorptive capability of the host country affects how FDI (foreign direct inflows) impact energy intensity. - Highlights: • Low income states inhibit fuel substitution and investment in energy conservation. • Income elasticity evolves as we pass through boom and recessionary periods. • The goals of sustainable growth and energy conservation are not mutually exclusive. • Absorptive capability affects the impact of FDI on energy intensity

  5. Energy conservation in nationalised transportation sector

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, R C

    1980-01-01

    About 60% of high speed diesel is consumed by the road transport industry. The hike in fuel prices calls for urgent measures to conserve diesel. The paper discusses the various measures undertaken to conserve diesel in the nationalized transport sector.

  6. Strategies for energy conservation in HWP (M)

    International Nuclear Information System (INIS)

    Rama Rao, V.V.S.; Gupta, R.V.; Rao, A.L.N.

    2002-01-01

    Heavy water plant at Manuguru is designed to produce 185 MTY of NG heavy water based on bi-thermal H 2 S-H 2 O exchange process. Being a plant based on isotopic separation process, the requirement of feed water, utilities and the inventory of H 2 S is very huge. Sustained efforts have brought down the specific energy consumption from 53.3 GJ/Kg of nuclear grade product in the financial year 1997-98 to a value of 37.6 GJ/Kg of product in the financial year 2001-02, which amounts to a reduction of 29.5%. Several modifications have been done in the following areas, which contributed towards significant energy conservation eg. reduction in consumption of steam, electric power, chemicals and man hours and in the down time of the plant/equipment's, reduction in the loss of H 2 S, D 2 O and various utilities, enhanced recycling of liquid effluents, increase in production, on stream hours, purity of the inputs, avoiding trips and unusual occurrences, trimming the built in cushions, changes in the design/elimination of certain design provisions resulting in savings, increase in operational flexibility to facilitate smooth operation, improved house keeping and quality management, improved O and M practices, upgradation of required skills/qualifications of the personnel and increasing their motivation. This paper highlights the improvements done/being taken up since the year 2000. (author)

  7. Combining interviewing and modeling for end-user energy conservation

    International Nuclear Information System (INIS)

    Goldblatt, David L.; Hartmann, Christoph; Duerrenberger, Gregor

    2005-01-01

    Studying energy consumption through the lens of households is an increasingly popular research avenue. This paper focuses on residential end-user energy conservation. It describes an approach that combines energy modeling and in-depth interviews for communicating about energy use and revealing consumer preferences for change at different levels and intervention points. Expert knowledge was embodied in a computer model for householders that calculates an individual's current energy consumption and helps assess personal savings potentials, while also bringing in socio-technical and economic elements beyond the user's direct control. The paper gives a detailed account of this computer information tool developed for interviewing purposes. It then describes the interview guidelines, data analysis, and main results. In general, interview subjects overestimated the environmental friendliness of their lifestyles. After experience with the program, they tended to rate external (technological, societal) factors as somewhat stronger determinants of their consumption levels than personal (behavioral and household investment) factors, with the notable exception of mobility. Concerning long-term energy perspectives, the majority of subjects felt that society has the ability to make a collective choice towards significantly lower energy consumption levels. Interviewees confirmed that the software and interactive sessions helped them think more holistically about the personal, social, and technological dimensions of energy conservation. Lessons can be applied to the development of future energy communication tools

  8. Protocol Monitoring Energy Conservation; Protocol Monitoring Energiebesparing

    Energy Technology Data Exchange (ETDEWEB)

    Boonekamp, P.G.M. [ECN Beleidsstudies, Petten (Netherlands); Mannaerts, H. [Centraal Planburea CPB, Den Haag (Netherlands); Tinbergen, W. [Centraal Bureau voor de Statistiek CBS, Den Haag (Netherlands); Vreuls, H.H.J. [Nederlandse onderneming voor energie en milieu Novem, Utrecht (Netherlands); Wesselink, B. [Rijksinstituut voor Volksgezondheid en Milieuhygiene RIVM, Bilthoven (Netherlands)

    2001-12-01

    On request of the Dutch ministry of Economic Affairs five institutes have collaborated to create a 'Protocol Monitoring Energy Conservation', a common method and database to calculate the amount of energy savings realised in past years. The institutes concerned are the Central Bureau of Statistics (CBS), the Netherlands Bureau for Economic Policy Analysis (CPB), the Energy research Centre of the Netherlands (ECN), the National Agency for Energy and Environment (Novem) and the Netherlands Institute of Public Health and the Environment (RIVM). The institutes have agreed upon a clear definition of energy use and energy savings. The demarcation with renewable energy, the saving effects of substitution between energy carriers and the role of import and export of energy have been elaborated. A decomposition method is used to split up the observed change in energy use in a number of effects, on a national and sectoral level. This method includes an analysis of growth effects, effects of structural changes in production and consumption activities and savings on end use or with more efficient conversion processes. To calculate these effects the total energy use is desegregated as much as possible. For each segment a reference energy use is calculated according to the trend in a variable which is supposed to be representative for the use without savings. The difference with the actual energy use is taken as the savings realised. Results are given for the sectors households, industry, agriculture, services and government, transportation and the energy sector; as well as a national figure. A special feature of the protocol method is the application of primary energy use figures in the determination of savings for end users. This means that the use of each energy carrier is increased with a certain amount, according to the conversion losses caused elsewhere in the energy system. The losses concern the base year energy sector and losses abroad for imports of secondary

  9. Energy taxation and the double dividend effect in Taiwan's energy conservation policy-an empirical study using a computable general equilibrium model

    International Nuclear Information System (INIS)

    Bor, Yunchang Jeffrey; Huang Yophy

    2010-01-01

    Faced with pressure from greenhouse gas reductions and energy price hikes, the Taiwan government is in the process of developing an energy tax regime to reflect environmental external costs and effectively curb energy consumption, as well as mitigate CO 2 emissions through an adequate pricing system. This study utilizes a CGE model to simulate and analyze the economic impacts of the draft Energy Tax Bill and its complementary fiscal measures. Under the assumption of tax revenue neutrality, the use of energy tax revenue generated for the purpose of reducing income tax is the best choice with double dividend effects since it will effectively stimulate domestic consumption and investment, and, consequently, mitigate the negative impacts of the distortionary tax regime. The double dividend effect is less significant, however, when the supplementary measures being used are for government expenditure. Nevertheless, all supplementary measures have effectively reduced energy consumption, which means they have delivered at least the first dividend-in the sense of CO 2 emissions control. It has been verified in this study that having adequate public-finance policy measures is the key to realizing the double dividend effect.

  10. Careers in the Renewable Energy and Conservation Professions and Trades.

    Science.gov (United States)

    Department of Energy, Washington, DC.

    Many kinds of jobs can be found in the renewable energy and energy conservation industries. This pamphlet indicates that a large career potential exists within the solar and conservation professions and trades. These careers consist of individuals who design, build, or install solar heating or hot water systems, who implement energy conservation…

  11. 40 CFR 73.26 - Conservation and renewable energy reserve.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Conservation and renewable energy... renewable energy reserve. The Administrator will allocate 300,000 allowances to the Conservation and Renewable Energy Reserve subaccount of the Acid Rain Data System. Allowances from this Reserve will be...

  12. Conserving energy in new buildings: analysis of nonregulatory policies

    Energy Technology Data Exchange (ETDEWEB)

    Scheer, R.M.; Nieves, L.A.; Mazzucchi, R.P.

    1981-05-01

    The costs and effectiveness of non-regulatory options relative to those of a regulatory approach are analyzed. Nonregulatory program alternatives identified are: information and education programs, tax incentives and disincentives, and mortage and finance programs. Chapter 2 briefly reviews survey data to assess present public awareness of energy issues and energy-efficient building design. Homebuyer and homebuilder surveys are reviewed and conservation motivations are discussed. Chapter 3 examines the provision of technical and economic information to various factors affecting building design decisions. This approach assumes that the economic incentives and technical means to achieve energy conservation goals already exist but that critical information is lacking. Chapter 4 examines how adjustments to the tax structure could enhance economic incentives and counter economic disincentives for energy conservation. Qualifying buildings for tax benefits would almost certainly require certification of design energy consumption. The effectiveness of tax incentives would depend in part on dissemination of public information regarding the incentives. Chapter 5 examines subsidies, such as subsidized mortgages and loan guarantees, which lower the cost of money or other costs but do not change the market structure facing the consumer. Certification that buildings qualify for such treatment would probably be required. Chapter 6 presents recommendations based on the study's findings. (MCW)

  13. Department of Defense Facilities Energy Conservation Policies and Spending

    National Research Council Canada - National Science Library

    Andrews, Anthony

    2008-01-01

    .... This report reviews energy conservation legislation and Executive Orders that apply to the Department of Defense, directives and instructions to the military departments and agencies on implementing...

  14. 76 FR 13168 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2011-03-10

    ... average unit costs of residential energy in a Federal Register notice entitled, ``Energy Conservation... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  15. Energy conservation measures adopted at Heavy Water Plant, Manuguru

    International Nuclear Information System (INIS)

    Gupta, R.V.; Venugopal, M.

    1997-01-01

    The importance of conservation of energy is well recognised all over the world as the world reserves of fossil fuels will eventually run out depending on the rate of their use. This paper deals with various energy conservation schemes adopted at Heavy Water Plant, Manuguru (HWPM). Most energy conservation measures offer large financial saving with very short pay back periods. This fact has been well recognised by the management of HWPM as well as Heavy Water Board and their wholehearted and enthusiastic approach to energy conservation and energy management yielded very good results in reducing the operating cost. The process of energy conservation is not a one time exercise. Persistent efforts are on to identify the areas like condition of heat exchangers, margins in control valves, steam and condensate leakages etc. for further reduction in energy consumption

  16. Designing effective incentives for energy conservation in the public sector

    Science.gov (United States)

    Drezner, Jeffrey Alan

    Understanding why government officials behave in certain ways under particular circumstances is an important theme in political science. This research explores the design of policies and incentives targeted at public sector officials, in particular the use of market based policy tools in a non-market environment, and the influence of that organizational environment on the effectiveness of the policy. The research examines the case of Department of Defense (DoD) facility energy management. DoD energy policy includes a provision for the retention of savings generated by conservation activities: two-thirds of the savings is retained at the installation generating the savings, half to used for further investment in energy conservation, and half to be used for general morale, welfare, and recreation activities. This policy creates a financial incentive for installation energy managers to establish higher quality and more active conservation programs. A formal written survey of installation energy managers within DoD was conducted, providing data to test hypotheses regarding policy effectiveness and factors affecting policy implementation. Additionally, two detailed implementation case studies were conducted in order to gain further insights. Results suggest that policy design needs to account for the environment within which the policy will be implemented, particularly organizational culture and standard operating procedures. The retention of savings policy failed to achieve its intended outcome---retention of savings for re-investment in energy conservation---because the role required of the financial management community was outside its normal mode of operation and interests and the budget process for allocating resources did not include a mechanism for retention of savings. The policy design did not adequately address these start-up barriers to implementation. This analysis has shown that in order for retention of savings, or similar policies based on market

  17. Energy conservation efforts in Indian mining industry - an overview

    International Nuclear Information System (INIS)

    Pradhan, G.K.; Chattoraj, P.

    2010-01-01

    Conservation of energy is a national agenda as had been set by our Prime Minister at various fora, in the case of coal mining also there is ample scope to reduce specific energy conservation. The issue can be resolved through 'energy audit' so as to identify the areas of improvement, technology to introduce and innovative system to adopt. In a nutshell it can be concluded that, through energy audit, we can immediately save 10-15 % of energy without any major investment

  18. Energy consumption and conservation patterns in Canadian households. Summary report. Habitudes de consommation et de conservation de l'energie dans les foyers Canadiens. Resume

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.; Claxton, J.D.

    1978-01-01

    To examine the consumer behavior sector of energy demand patterns in Canada, this report undertook to identify major groupings of households based on energy consumption profiles and energy values, to relate these groupings to situational and demographic factors, and to initiate a comparative analysis of the receptivity of the major groupings to alternative energy conservation policy proposals. Data were collected from household surveys and energy suppliers. Householders were asked about their attitudes to energy conservation and energy policy, and profiles of energy consumption patterns of typical households were identified. To aid in evaluating the research, households were classified according to their levels of in-home energy consumption and automobile gasoline consumption. The findings indicated a range of lifestyles highly interrelated in terms of levels of energy consumption, ownership of energy-consuming products, knowledge and concern for energy issues, willingness to cut back energy consumption, and preferences for alternative conservation policies. The study has shown that most consumers are not very aware of the energy problem, do not see conservation as a serious need, and are unlikely to accept major policy interventions that result in major changes in energy supplies and current lifestyles. A number of recommendations are made as to policies, and their possible impact, to conserve household energy. 8 refs. 11 tabs.

  19. Energy consumption and conservation patterns in Canadian households. Summary report. Habitudes de consommation et de conservation de l'energie dans les foyers Canadiens. Resume

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G H.G.; Ritchie, J R.B.; Claxton, J D

    1978-01-01

    To examine the consumer behavior sector of energy demand patterns in Canada, this report undertook to identify major groupings of households based on energy consumption profiles and energy values, to relate these groupings to situational and demographic factors, and to initiate a comparative analysis of the receptivity of the major groupings to alternative energy conservation policy proposals. Data were collected from household surveys and energy suppliers. Householders were asked about their attitudes to energy conservation and energy policy, and profiles of energy consumption patterns of typical households were identified. To aid in evaluating the research, households were classified according to their levels of in-home energy consumption and automobile gasoline consumption. The findings indicated a range of lifestyles highly interrelated in terms of levels of energy consumption, ownership of energy-consuming products, knowledge and concern for energy issues, willingness to cut back energy consumption, and preferences for alternative conservation policies. The study has shown that most consumers are not very aware of the energy problem, do not see conservation as a serious need, and are unlikely to accept major policy interventions that result in major changes in energy supplies and current lifestyles. A number of recommendations are made as to policies, and their possible impact, to conserve household energy. 8 refs. 11 tabs.

  20. Determination analysis of energy conservation standards for distribution transformers

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, P.R.; Van Dyke, J.W.; McConnell, B.W.; Das, S.

    1996-07-01

    This report contains information for US DOE to use in making a determination on proposing energy conservation standards for distribution transformers as required by the Energy Policy Act of 1992. Potential for saving energy with more efficient liquid-immersed and dry-type distribution transformers could be significant because these transformers account for an estimated 140 billion kWh of the annual energy lost in the delivery of electricity. Objective was to determine whether energy conservation standards for distribution transformers would have the potential for significant energy savings, be technically feasible, and be economically justified from a national perspective. It was found that energy conservation for distribution transformers would be technically and economically feasible. Based on the energy conservation options analyzed, 3.6-13.7 quads of energy could be saved from 2000 to 2030.

  1. 10 CFR 430.34 - Energy and water conservation standards amendments

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy and water conservation standards amendments 430.34 Section 430.34 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Energy and Water Conservation Standards § 430.34 Energy and water conservation standards...

  2. Atomic energy, environment and energy conservation in Eastern Europe

    International Nuclear Information System (INIS)

    Kanno, Koko

    1990-01-01

    About 12 % of generated electric power is the nuclear power in Eastern European countries. Generally electric power is short in these countries, and as the countermeasures for environment, the promotion of nuclear power generation is considered. However, the public opinion opposing it is also strong. The situation in respective countries is briefly discussed. The prevention of warming of the earth and the reduction of carbon dioxide gas release are the largest environmental problems discussed in western countries, but in Eastern European countries, the far more primitive problem of the damage due to SO 2 is serious. Notwithstanding high sulfur brown coal is the main fuel, the installation of desulfurizing facilities has been neglected. The demand for the countermeasures to environmental pollution by people has become strong. The energy efficiency in Eastern European countries is poor, and it is one of the causes of environmental pollution. The industrial structure is centering around heavy industries which consume much energy, the energy loss arises due to the delay of equipment modernization, and the energy is cheap, so its saving is neglected. Energy conservation is important. (K.I.)

  3. 78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2013-03-22

    ... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  4. Development of large scale and wind energy conservation system. Operational studies on a large-scale wind energy conservation system; Ogata furyoku hatsuden system no kaihatsu. Ogata furyoku hatsuden system no unten kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Takita, M [New Energy and Industrial Technology Development Organization, Tokyo (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for operational studies on a large-scale wind energy conversion system. A total of 8 domestic and foreign cases are studied for wind energy conversion cost, to clarify the causes for higher cost of the Japanese system. The wind power systems studied include Japanese (5 units at Tappi Wind Park, the same type supplied by company M), US (California Wind Farm, 300 units) and UK (Wales Wind Farm, 103 units) systems. The investment costs are 639, 285 and 189 thousand yen/kW for the Japanese, US and UK systems, respectively. It is also revealed that the power plant itself and assembling costs account for a majority (70 to 88%) of the total investment cost. The higher cost of the Japanese system results from a smaller number of units installed, and the power plant cost can be drastically reduced by mass production. Increasing size also reduces cost greatly.

  5. Case studies in conservation science

    Science.gov (United States)

    Bisulca, Christina

    The research presented in this dissertation covers three separate topics of conservation as defined by the National Science Foundation: 1) Materials Stabilization, Strengthening, Monitoring, and Repair; 2. Understanding Material Degradation and Aging; and 3) Materials and Structural Characterization of Cultural Heritage Objects (the 'technical study'). The first topic is addressed through a study to assess the consolidant tetraethoxysilane for the stabilization of alum treated wood. Falling under materials degradation studies is a study published in American Museum Novitates to understand how environmental conditions affect the aging of fossil resins from five different deposits. Two separate studies are included in technical study of cultural heritage objects which comprises the third research area of materials characterization. The first is a survey of red dyes used in Chinese paintings from the Ming Dynasty to the Early Republic (1364-1911). The second is a study of the pigments, dyes and binders used in Hawaiian barkcloth (kapa) from the 19th century.

  6. The potential energy conservation of the Dutch industrial, business and service sector

    International Nuclear Information System (INIS)

    Van der Werff, R.L.; Opschoor, J.B.

    1992-01-01

    The database ICARUS has been used as a starting point to estimate the economical potential for energy conservation in different sectors of the Dutch society. ICARUS is based on research on real energy consuming processes and applications in a number of sub-sectors of the Dutch economy. The present energy conservation potential in the Netherlands is based on energy conservation studies in the Netherlands and other countries. For this article the economical efficient energy conservation potentials in 1992 have been investigated for the Dutch sectors, which do not supply energy. The potentials are determined on the basis of the technical energy conservation potentials for the year 2000, according to the database ICARUS. Two methods were used to extract the economic potential from the technical potential: the method of the Net Market Value and the method of the payback period. From the ICARUS analysis it appears that the technical potential for energy conservation is 479 PJ, which is 28.8% of the primary energy consumption of 1664 PJ in 1985. The economic energy conservation potential is 262 PJ for a payback period of less than five years, which is 17% of the 1985 primary energy consumption. Next to the above-mentioned analysis policy-aimed simulations were carried out for three scenarios to determine economical energy conservation potentials. In one scenario doubled energy prices were used in comparison with the 1991 prices. Another scenario uses the Net Market Value method with a 5% discount rate, and the third scenario uses both parameters

  7. 24 CFR 965.306 - Energy conservation equipment and practices.

    Science.gov (United States)

    2010-04-01

    ... Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when needed, replacement equipment, PHAs shall acquire only equipment that meets or exceeds the minimum efficiency... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Energy conservation equipment and...

  8. Financial Energy Conservation Projects at Independent Colleges and Universities.

    Science.gov (United States)

    Morrell, L. R.

    1981-01-01

    Factors affecting financial decisions for energy conservation projects at independent colleges and universities and methods that may be used when making a financial investment decision are examined, along with sources of funding for the projects. Projects that result in the conservation of energy resources might, in a time of extreme shortages,…

  9. Energy conservation in molecular dynamics simulations of classical systems

    DEFF Research Database (Denmark)

    Toxværd, Søren; Heilmann, Ole; Dyre, J. C.

    2012-01-01

    Classical Newtonian dynamics is analytic and the energy of an isolated system is conserved. The energy of such a system, obtained by the discrete “Verlet” algorithm commonly used in molecular dynamics simulations, fluctuates but is conserved in the mean. This is explained by the existence...

  10. A Better 2-D Mechanical Energy Conservation Experiment

    Science.gov (United States)

    Paesler, Michael

    2012-01-01

    A variety of simple classical mechanics energy conservation experiments are used in teaching laboratories. Typical one-dimensional (1-D) setups may involve falling balls or oscillating springs. Many of these can be quite satisfying in that students can confirm--within a few percent--that mechanical energy is conserved. Students generally have…

  11. Facts about industrial energy conservation in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, William A.

    1979-07-01

    The story of energy conservation in the US with particular emphasis on industry is presented. Then, the energy conservation program in General Motors including organization, plant guidelines, communication and motivation techniques, successful case histories, and some concepts for future savings is described in detail. (MCW)

  12. Energy conservation through thermally insulated structures

    International Nuclear Information System (INIS)

    Abu-Dayyeh, Ayoub

    2006-01-01

    The propose of this paper is to explicate its title through investigating the different available thermal insulating materials and the various techniques of application, as practiced in Jordan, in particular, and as practiced in many parts of the world in general, which will satisfy Jordanian standards in terms of heat transmittance and thermal comfort. A brief comparison with international standards will shed some light on the stringent measures enforced in the developed world and on our striving aspirations to keep pace. The paper consists of four main parts, pseudoally divided. The first part will deal with the mechanism of heat loss and heat gain in structures during summer and winter. It will also explain the Time-lag phenomenon which is vital for providing thermal comfort inside the dwellings. The second part will evaluate the damages induced by the temperature gradients on the different elements of the structure, particularly next to exterior opening. The paper will also demonstrate the damages induced by water condensation and fungus growth on the internal surfaces of the structure and within its skeleton. A correlation between condensation and thermal insulation will be established. The third part of the paper will evaluate the different available thermal insulating materials and the application techniques which will satisfy the needs for thermal insulating and thermal comfort at the least cost possible. The criteria of an economical design shall be established. As a conclusion, the paper infers answers to the following different criteria discussed throughout the different parts of the paper. The main theme of questions can be summarized as follows: 1)How energy conservation is possible due to thermal insulation? 2)The feasibility of investing in thermal insulation? 3)Is thermal comfort and a healthy atmosphere possible inside the dwellings during all season! What are the conditions necessary to sustain them? 4)What environmental impacts can exist due to

  13. Energy conservation in the EC glass industry

    Energy Technology Data Exchange (ETDEWEB)

    Waal, H. de [TNO Institute of Applied Physics, Delft (Netherlands)

    1994-12-31

    The data presented in this survey are based mainly on a recent study, performed by the Energy Technology Support Unit ETSU. Harwell Laboratory, United Kingdom, in the context of the EC-Thermie programme. Also, use has been made of a paper `Glass Manufacture, energy and CO{sub 2}-emissions`, presented by G.J. Copley of the British Glass Manufacturers Confederation, Sheffield, United Kingdom, presented at the Thermie Seminar in Wiesbaden, 1992. A third source of information has been the data collected by the CPIV, the European Glass Manufacturers Federation on the present and future economic situation of the EC Glass Industry. (orig.)

  14. Potential for energy-conserving capital equipment in UK industries

    Energy Technology Data Exchange (ETDEWEB)

    Fawkes, S D

    1986-01-01

    A summary is given of recent research into the potential for energy-conserving capital equipment in UK industries. The research had significant findings regarding the feasibility of achieving low-energy scenarios. It also stressed the importance of site specific factors in inhibiting incremental technical change such as that common in energy-conservation investments, developed a soft systems model of energy-management activities and investigated current progress and management styles in the brewing, malting, distilling and dairy sectors.

  15. FY 1999 report on basic survey for joint implementations, etc. Basic feasibility study on energy conservation at Novolipetsk Steelworks

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The survey involves COP (Conference of the Parties) joint implementations, etc., at the Russian Novolipetsk Steelworks (NLMK) who produces crude steel at 9.9-million tons/year. A large waste heat recovery system is introduced into the NLMK for reduction in natural gas consumption and in electric power purchase. The waste heat recovery facilities involve a sintering cooler/heater, TRT (top-pressure recovery turbine), and LD (Linz-Donawitz) converter gas recovery. Energy will be saved at 1730 Tcal/year, and greenhouse gas (CO2) will be reduced at 408,000 tons/year. A total of 20.9 times 1-billion yen needs to be invested. Since energy is priced low in Russia, the investment will result in but a little economic effect. In the Russian industrial circle, however, there is a move to raise the energy price by stages to secure corporation operating funds and refurbish obsolete facilities. Accordingly, probabilities are quite high that the project proposed here will be implemented if low-interest financing is available. Talks will continue between the two parties over yen credit availability, etc. It is indispensable to construct a framework which will enable implementations in compliance with COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change). (NEDO)

  16. A review of building energy regulation and policy for energy conservation in developing countries

    International Nuclear Information System (INIS)

    Iwaro, Joseph; Mwasha, Abraham

    2010-01-01

    The rapid growth of energy use, worldwide, hfs raised concerns over problems of energy supply and exhaustion of energy resources. Most of the developed countries are implementing building energy regulations such as energy standards, codes etc., to reduce building energy consumption. The position of developing countries with respect to energy regulations implementation and enforcement is either poorly documented or not documented at all. In addition, there is a lack of consistent data, which makes it difficult to understand the underlying changes that affect energy regulation implementation in developing countries. In that respect, this paper investigates the progress of building energy regulations in developing countries and its implication for energy conservation and efficiency. The present status of building energy regulations in 60 developing countries around the world was analysed through a survey of building energy regulations using online survey. The study revealed the present progress made on building energy regulations in relation to implementation, development and compliance; at the same time the study recommends possible solutions to the barriers facing building energy regulation implementation in the developing world. - Research Highlights: →Progress and implications of energy regulations in developing countries. →Investigation assessed the progress made on energy regulations using online survey. →Energy regulation activities is progressively increasing in developing countries. →The study identified 25 developing countries without energy regulatory standards. →The study shows relationship between energy regulation and energy consumption.

  17. Airline energy conservation options : summary options

    Science.gov (United States)

    1973-07-27

    In late May, 1973 the task of determining and evaluating measures for conserving fuel consumed by the airline industry was undertaken. This task was a part of the larger effort conducted by the Transportation Systems Center to determine measures that...

  18. Analysis of energy demand, and evaluation of energy conservation measures in urban districts

    International Nuclear Information System (INIS)

    Nakamura, H.; Yoshida, N.

    1994-01-01

    Mitsubishi Research Institute has analyzed the energy demand of a typical Japanese city, Yokohama, as well as the distribution of fossil-energy flow, and the final consumption by sectors. It has evaluated the effectiveness of various energy conservation measures, (e.g., cogeneration, electric cars, insulation,...) in countering the global warming trend. This study defines a viable methodology which may be utilized, in the future, in examining the effectiveness of environmental policies. (TEC). 1 tab., 4 figs

  19. Feasibility study on implementing energy conservation measures in an iron and steel plant in the Islamic Republic of Iran

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    With an objective to save energy and reduce greenhouse gas emission, a project has been discussed to introduce a gas turbine combined cycle power generation system for effective waste heat utilization and a pellet coating facility into the direct reduction steel making plant of Ahwaz Steel Complex in the Islamic Republic of Iran. The project will have a waste heat boiler installed at the outlet of the MIDREX plant waste heat recovery device to link it with a gas turbine combined cycle power plant to structure a 42-MW power generation system. In addition, productivity enhancement was attempted by applying the raw material pellets with coating to raise the reduction gas blow-in temperature. The energy saving effect expected from this project would be saving of 63,140 tons of crude oil equivalent annually, and the greenhouse effect gas reducing effect would reduce 173,790 t-CO2 annually. Although the investment will require about 3.16 billion yen, the cost reduction amount in association with power generation is small because of the power purchase unit cost being as very low as 1.9 yen/kWh, making the investment recovery period 10.2 years. Therefore, the project will not be realizable economically. (NEDO)

  20. 77 FR 14509 - State Energy Program and Energy Efficiency and Conservation Block Grant (EECBG) Program; Request...

    Science.gov (United States)

    2012-03-12

    ... DEPARTMENT OF ENERGY [Docket No. EESEP0216] State Energy Program and Energy Efficiency and Conservation Block Grant (EECBG) Program; Request for Information AGENCY: Office of Energy Efficiency and... (SEP) and Energy Efficiency and Conservation Block Grant (EECBG) program, in support of energy...

  1. Overview of energy demand and opportunities for conservation

    Energy Technology Data Exchange (ETDEWEB)

    Graham, P. J.

    1977-10-15

    The widespread practice of conservation could make a substantial reduction in the rate of growth of demand and hence in the rate at which resources need to be developed and consumed. An attempt is not made to show that conservation is an alternative to increasing energy supply. After reviewing the consumption of energy before the 1973 energy crisis, the main features of conservation which have brought it to the forefront of energy policy are examined. Some information on present consumption patterns in New Zealand is presented.

  2. Energy conservation in mechanical industry; Maitrise de l`energie dans les industries mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The workshop is composed of 12 communications on the theme of energy consumption, conservation and management in industry, and more especially in metal industry: evaluation of the energy savings potential in the French industry; official energy diagnosis procedure in buildings; the French national gas utility policy for energy conservation and economical performance in industry; energy conservation with speed variators for electric motors; energy audits and energy metering for conservation objectives. Examples of energy efficient systems or energy audits in various industrial sectors (compressed air, industrial buildings, heat treatments, curing...) are also presented. The electric power quality EDF`s contract is also discussed

  3. Energy resources, CO2 production and energy conservation

    International Nuclear Information System (INIS)

    O'Callaghan, P.W.

    1993-01-01

    World fossil fuel reserves, historical and current rates of consumption are reviewed and estimates of indigeneous lives in geographical regions are made. Rates of production and accumulations of carbon dioxide and other greenhouse gases in the atmosphere are calculated and correlations made with measured global mean temperatures and concomitant sea-level rises. It is concluded that, if present rates of global fossil-fuel consumptions continue unabated, the world's fossil-fuel store will be depleted by the year 2050. This would be accompanied by a substantial rise in global mean temperature. The effects of various protocols for the reductions of emissions are examined. It is concluded that there is no alternative than to cease the production and release into the atmosphere of the more damaging man-made greenhouse gases as soon as is practicably possible and to seek a sustained reduction in the rates of combustion of fossil fuels world-wide via energy management and conservation. (author)

  4. Energy conservation and cost benefits in the dairy processing industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Guidance is given on measuring energy consumption in the plant and pinpointing areas where energy-conservation activities can return the most favorable economics. General energy-conservation techniques applicable to most or all segments of the dairy processing industry, including the fluid milk segment, are emphasized. These general techniques include waste heat recovery, improvements in electric motor efficiency, added insulation, refrigeration improvements, upgrading of evaporators, and increases in boiler efficiency. Specific examples are given in which these techniques are applied to dairy processing plants. The potential for energy savings by cogeneration of process steam and electricity in the dairy industry is also discussed. Process changes primarily applicable to specific milk products which have resulted in significant energy cost savings at some facilities or which promise significant contributions in the future are examined. A summary checklist of plant housekeeping measures for energy conservation and guidelines for economic evaluation of conservation alternatives are provided. (MHR)

  5. Energy audit: potential of energy - conservation in Jordanian ceramic industry

    International Nuclear Information System (INIS)

    Adas, H.; Taher, A.

    2005-01-01

    This paper represents the findings of the preliminary energy-audits performed by the Rational Use of Energy Division at the National Energy Research Center (NERC), as well as the findings of a detailed energy-audit carried out in the largest Ceramic plant in Jordan (Jordan Ceramic industries).These studies were preceded by a survey of the ceramic factories in Jordan. The survey was carried out in 1997. The performed preliminary energy-audits showed that an average saving-potential in most of theses plants is about 25 % of the total energy-bills in these plants, which constitutes a considerable portion of the total production-cost. This fact was verified through the detailed energy-audit performed by NERC team for the largest Ceramic Plant in Jordan in June 2003, which showed an energy-saving potential of about 30 %. This saving can be achieved by some no-cost or low-cost measures, in addition to some measures that need reasonable investments with an average pay-back period of about two years. This detailed energy-audit covered electrical systems, refrigeration systems, compressed-air systems, and kilns. The results of the detailed energy-audit can be disseminated to other Ceramic plant, because of the similarity in the production process between these plants and the plant where the detailed energy-audit was carried out. (author)

  6. Energy Conservation in Dissipative Processes: Teacher Expectations and Strategies Associated with Imperceptible Thermal Energy

    Science.gov (United States)

    Daane, Abigail R.; McKagan, Sarah B.; Vokos, Stamatis; Scherr, Rachel E.

    2015-01-01

    Research has demonstrated that many students and some teachers do not consistently apply the conservation of energy principle when analyzing mechanical scenarios. In observing elementary and secondary teachers engaged in learning activities that require tracking and conserving energy, we find that challenges to energy conservation often arise in…

  7. Conservation – a new and efficient source of energy

    CSIR Research Space (South Africa)

    National Building Research Institute

    1981-09-01

    Full Text Available Energy is becoming increasingly expensive. Conservation can offset the increase in energy cost and can therefore be considered a new and can fairly inexpensive source of energy. The following article looks at the ways in which energy savings in both...

  8. Fiscal 1998 research report on the feasibility study on energy conservation of Zaporozhye steelworks; Zaporozhye seitetsusho sho energy 1998 nendo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the Japan-Russia joint project, this report summarizes the feasibility study results on improvement of waste heat recovery at blast furnace hot stoves (recovery of sensible heat of exhaust gas by water or other heat media, and use of preheating combustion air and fuel gas), improvement of the thermal efficiency of slabbing soaking furnaces (optimization of burner combustion by improving control of an air fuel ratio, and heat patterns in heating), and other operational improvement for Zaporozhye steelworks, Ukraine (2,370,000t/y in crude steel production). As the field survey result, various other energy-saving issues were found in addition to the above 2 themes. 9 projects thus were identified in blast furnace, steel making, rolling and energy fields as follows: improvement of combustion control at hot stoves, waste heat recovery equipment for hot stoves, blast furnace top pressure recovery turbine (TRT) power generation equipment, blast furnace top gas recovery equipment, changeover from an open hearth furnace to a basic oxygen furnace, adoption of continuous casting, improvement of slab yield in slabbing, shortening of a track time, drop of insertion temperature in direct hot charge rolling, and the gas turbine cogeneration plant. (NEDO)

  9. US energy conservation and efficiency policies. Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert K.; Onysko, Ganna [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); McGowan, Elizabeth; Scheer, Richard M. [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States)

    2010-11-15

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future. (author)

  10. US energy conservation and efficiency policies: Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert K. [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); McGowan, Elizabeth [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States); Onysko, Ganna, E-mail: gonysko@thegef.or [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); Scheer, Richard M. [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States)

    2010-11-15

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future.

  11. US energy conservation and efficiency policies: Challenges and opportunities

    International Nuclear Information System (INIS)

    Dixon, Robert K.; McGowan, Elizabeth; Onysko, Ganna; Scheer, Richard M.

    2010-01-01

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future.

  12. Problems in the implementation of energy conservation measures. II. Consumer motivation

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, P. H.

    1977-10-15

    During the course of 1975 a national survey of household attitudes to energy use and conservation was undertaken. The study suggested that while the public are generally in favor of energy conservation, they do not practice it. The study highlighted the need to do more than merely raise the level of awareness of the need for energy conservation. The energy intensive nature of our life-style was identified as a critical constraint on the implementations of effective voluntary energy conservation programs. It was suggested that our pattern of energy use is so deeply embedded in our everyday behaviors that it would take more than the presentation of information to produce the necessary changes in behavior. Some of the problems involved in attempting to motivate the consumer to conserve energy using either an extrinsic or instrinsic motivational approach are explored. A general model of the energy system is employed to illustrate that changes in the informational environment must be accompanied by changes in the institutional environment if pro-conservation attitudes are to be converted into conserving behavior. The case of personal transportation is used to indicate the need for a comprehensive package of measures which not only motivate the consumer but also facilitate and reinforce positive behavior if the dual goals of satisfying personal mobility needs and energy conservation are to be satisfied.

  13. Energy conservation potential in China’s petroleum refining industry: Evidence and policy implications

    International Nuclear Information System (INIS)

    Lin, Boqiang; Xie, Xuan

    2015-01-01

    Highlights: • A long-term equilibrium relationship of energy demand in China’s petroleum refining industry is established. • The sectoral energy conservation potential is evaluated by using scenarios analysis. • Energy prices, enterprise scale, R and D investment and ownership structure affect electricity intensity. • Future policy for energy conservation in China’s petroleum refining industry is suggested. - Abstract: China is currently the second largest petroleum refining country in the world due to rapid growth in recent years. Because the petroleum refining industry is energy-intensive, the rapid growth in petroleum refining and development caused massive energy consumption. China’s urbanization process will guarantee sustained growth of the industry for a long time. Therefore, it is necessary to study the energy conservation potential of the petroleum industry. This paper estimates the energy conservation potential of the industry by applying a cointegration model to investigate the long-run equilibrium relationship between energy consumption and some factors such as energy price, enterprise scale, R and D investment and ownership structure. The results show that R and D investment has the greatest reduction impact on energy intensity, and the growth of market participants (i.e. the decline of the share of state-owned companies) can improve energy efficiency of this industry. Under the advanced energy-saving scenario, the accumulated energy conservation potential will reach 230.18 million tons of coal equivalent (tce). Finally, we provide some targeted policy recommendations for industrial energy conservation

  14. Energy conservation in pulp and paper industry: some thoughts

    Energy Technology Data Exchange (ETDEWEB)

    Sadawarte, N. S.; Prasad, A. K.; Khanolkar, V. D.; Shenoy, S. C.

    1980-03-15

    The pulp and paper industry is highly energy intensive. In view of the spiralling fuel prices and rising power costs, there is an urgent need to conserve energy through better management of various operations in the industry, from the optimal utilization of the forest residues to the shipment of the final product. The total energy concept, e.g., energy generation, distribution and utilization in Indian paper industry is discussed. The need for an energy audit is emphasized and the formats of energy reporting forms are included. Short and long term measures to be enforced to achieve energy savings in the pulp and paper mills are outlined. Some important energy conservation approaches are also discussed. Factors affecting energy efficiency in a pulp and paper mill are reviewed. Some areas where sustained R and D efforts should be focused to make the paper industry nearly self-sufficient in energy generation and utilization are also given. It is essential to have a National Energy Policy clearly defining achievable targets of energy conservation for industry. The Indian paper industry could advantageously form its own committee to review the operation of the various mills in the country and come out with concrete solutions for higher energy efficiency and more effective conservation of energy.

  15. Energy-conserving programming of VVI pacemakers: a telemetry-supported, long-term, follow-up study.

    Science.gov (United States)

    Klein, H H; Knake, W

    1990-06-01

    Thirty patients with VVI pacemakers (Quantum 253-09, 253-19, Intermedics Inc., Freeport, TX) were observed for a mean of 65 months. Within 12 months after implantation, optimized output programming was performed in 29 patients. This included a decrease in pulse amplitude (22 patients), pulse width (4 patients), and/or pacing rate (11 patients). After 65 months postimplantation, telemetered battery voltage and battery impedance were compared with the predicted values expected when the pulse generator constantly stimulates at nominal program conditions (heart rate 72.3 beats/min, pulse amplitude 5.4 V, pulse width 0.61 ms). Instead of an expected cell voltage of 2.6 V and a cell impedance of 10 k omega mean telemetered values amounted to 2.78 V and 1.4 k omega, respectively. These data correspond to a battery age of 12-15 months at nominal program conditions. This long-term follow-up study suggests that adequate programming will extend battery longevity and thus pulse generator survival in many patients.

  16. Energy conservation and energy prices: the Hungarian experience

    International Nuclear Information System (INIS)

    Molnar, L.

    1997-01-01

    The main sources of emissions into the outdoor air are from the energy sector (e.g. power plants), industry, the transport sector and the residential sector (buildings). The danger from most of these emissions is the fact that heat plants and boilers of residential buildings in particular, are usually in the areas where people live and work and therefore their emissions may have a direct effect on health. The best way to improve this situation - to diminish emissions and to improve air quality - is to increase the efficiency of both energy production and use. This also has important consequences for the economic use of the national energy carrier stock and diminishes the need to import energy which increases the competitiveness of goods produced. The Hungarian government has set out an Energy Saving Programme to address, among other things the fact that the Hungarian average energy consumption per capita is less than the EU average but the energy intensity (the necessary energy to produce 1 USD GDP) is 3.5-4.0 times higher than the EU average. It has been shown that the best way to save energy is to invest in energy-conscious behaviour and training. Recent studies in public and residential buildings have shown that there is a potential for high energy saving in Hungarian buildings which is independent from the building technology used. Also, the pay-back times of investment in the building envelope are significantly higher than the pay-back times of investment in heating-ventilating or control systems, while the energy saved was of the same magnitude. (author) 5 figs., 5 tabs., 6 refs

  17. Training program for energy conservation in new-building construction. Volume II. Energy conservation technology: for the building inspector

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This training manual contains the basic information necessary to acquaint the field building inspector with the concepts of energy conservation in buildings and instructs him in the basic techniques of field inspection of energy compliance.

  18. Water Conservation Study, Ft. Drum, New York, Watertown, New York

    National Research Council Canada - National Science Library

    1996-01-01

    The purpose of this water conservation study is to conduct a limited site survey and evaluate energy use and savings, estimate construction costs and water savings and provide a cost to savings ratio...

  19. Water Conservation Study, Badger Army Ammunition Plant, Baraboo, Wisconsin

    National Research Council Canada - National Science Library

    1995-01-01

    The purpose of this water conservation study is to identify projects which will result in energy maintenance and cost savings in the process water distribution system at Badger Army Ammunition Plant (BAAP...

  20. Water Conservation Study. Badger Army Ammunition Plant, Baraboo, Wisconsin

    National Research Council Canada - National Science Library

    1995-01-01

    The purpose of this water conservation study is to identify projects which will result in energy maintenance and cost savings in the process water distribution system at Badger Army Ammunition Plant (BAAP...

  1. Water Conservation Study, Ft. Drum, New York, Watertown, New York

    National Research Council Canada - National Science Library

    1996-01-01

    The purpose of this water conservation study is to conduct a limited site survey and evaluate energy use and savings, estimate construction costs and water savings and provide a cost-to-savings ratio...

  2. Global energy-momentum conservation in general relativity

    International Nuclear Information System (INIS)

    Nissani, N.; Leibowitz, E.

    1989-01-01

    It is shown that there exists a family of coordinate systems in which the energy-momentum tensor is globally conserved. Furthermore, this preferred class of frames includes geodesic systems with respect to any arbitrary point or timelike geodesic line. This implies a physically satisfactory conservation law with no need to introduce an extraneous pseudotensor

  3. State energy conservation plan for New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The energy-savings and energy-management programs set up by state agencies in New Mexico are presented. Also the energy-savings and energy-management programs for public schools are presented. Plans and summaries are also given for the following program: solar water heaters for secondary schools; solar portable classroom demonstration; energy-savings and energy-management programs for county and municipal governments; energy-savings programs for commercial and residential sectors; weatherization; solar sustenance; energy-savings programs for hospitals and industrial buildings; carpools and vanpools; a program encouraging compliance with the national 55-mph speed limit; waste-oil recycling; utilitites; agriculture; procurement; modification; public information; and an administrative packet containing information on how to facilitate internal accounting procedures.

  4. Energy demand : analysis, management and conservation

    International Nuclear Information System (INIS)

    Munasinghe, Mohan

    1990-01-01

    The papers in this book are expected make useful contributions to energy research and policy whether they are driven with the objective of augmenting supplies to reduce oil dependence, to increase the economic benefit per unit of energy consumed, or to reduce the impact of energy use on the environment. Papers relevant to INIS subject scopes are indexed separately. (original)

  5. Energy conservation: a requirement of the present time

    International Nuclear Information System (INIS)

    Alcoforado, Fernando Antonio Goncalves

    1993-01-01

    The origins of the financial crisis that affects the Brazilian electrical sector is presented. The options available to overcome this situation and the role played by energy conservation are described. 7 refs

  6. Energy conservation campaign at Sandvik AB in Sandviken

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Rune

    1979-07-01

    Sandvik AB's performed an analysis showing oil consumption for steam production was increasing considerably. Energy conservation measures were implemented to decrease the oil consumption and to make lasting changes.

  7. Effects of energy conservation programs: report to IEA (International Energy Agency) Annex 7, Local Government Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Benton, L.; Engebeck, L.; Erikson, B.E.; Fredriksson, G.

    1984-01-01

    This Bulletin is an anthology of 13 essays by different authors covering various aspects of government programs for energy conservation. In six essays effects of energy codes, subsidies to conservation measures in buildings and advisory services are discussed. Results from several empirical studies are presented. Five essays deal with side-effects (or secondary effects) of energy conservation. Moisture and increased radiation from radon are two types of negative effects that are covered. Also positive effects such as promotion of innovations or increased employment are discussed. Policy instruments are normally implemented by the local authorities. This is illustrated by a description of energy planning for a new suburb in one municipality. Some tentative conclusions are presented in the final essay.

  8. Development and Simulation of Decentralised Water and Energy Supply Concepts – Case Study of Rainwater Harvesting at the Angkor Centre for Conservation of Biodiversity in Cambodia

    Directory of Open Access Journals (Sweden)

    Joel Czarny

    2017-12-01

    Full Text Available Besides a sufficient energy supply, concepts for accommodations require an intelligent water management. Using the example of quarters that do not have water and energy access, a dynamic simulation model is presented in which a rainwater harvesting concept is implemented and simulated over one year using MATLAB-Simulink. The aim is to minimize respectively suspend the use of fossil energy sources and to guarantee the provision of decentralized clean drinking water. Since traditional water bodies, e.g. groundwater, are increasingly polluted and depleted, utilisation of alternative sources is prudent. Especially in rural areas, where access to drinking water is scarce, rainwater is suitable for providing potable water. Besides its beneficial chemical water properties, it is easily accessed in a decentralized manner, which makes it a preferred choice in areas with sufficient precipitation. However, access to rainwater is limited by its occurrence and contamination, calling for proper storage, utilisation, and treatment strategies. For this purpose, a rainwater harvesting system, including different water and energy management systems, was modelled and implemented using the site of the Angkor Centre for Conservation of Biodiversity in Cambodia as an example. For the simulation, a precipitation generator was implemented using real historical rain event data. An appropriate rainwater treatment process was chosen, consisting of a microfiltration and a subsequent ultrafiltration unit removing bacteriological loads entirely. Both were modelled and implemented dynamically. Using the site of the Angkor Centre of Conservation of Biodiversity, a complete rainwater harvesting plant was implemented including harvest, storage, and utilization of rainwater. Further, a renewable energy management strategy is developed, using photovoltaic modules and batteries. It was shown that the cumulative runoff meets the water demand of the Angkor Centre for Conservation of

  9. Energy conservation in French industry and at Rhone-Poulenc

    Energy Technology Data Exchange (ETDEWEB)

    Mongon, A.

    1979-07-01

    Thirteen examples are given to illustrate France's energy conservation program. The examples show the most efficient way of energy sources management, the application of the process optimization's method, and the use of control equipment for process and heating. The details on how energy is used rationally at Rhone-Poulenc are presented.

  10. Basic Energy Conservation and Management--Part 2: HVAC

    Science.gov (United States)

    Krueger, Glenn

    2012-01-01

    Reducing school district energy expenditures has become a universal goal, and new technologies have brought greater energy efficiencies to the school environment. In Part 1 of this two-part series, the author discussed the steps required to establish an energy conservation and management program with an emphasis on lighting. In this article, he…

  11. Energy Conservation. The Best of ERIC, Number 19.

    Science.gov (United States)

    ERIC Clearinghouse on Educational Management, Eugene, OR.

    The 13 articles in this annotated bibliography cover a wide range of concerns from the finances of energy conservation to solar energy applications, to building design, to building maintenance, and to the role of the science teacher as an energy analyst and activist. (IRT)

  12. FY 2000 survey report on the project for preparation of the international energy utilization rationalization basis. 2nd volume. Survey/study for the spread of energy conservation technology; 2000 nendo chosa hokokusho. Kokusai energy shiyo gorika kiban seibi jigyo (Sho energy gijutsu no fukyu no tameno chosa kenkyu to - 2)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In China which is the largest energy consumption country in the Asian region and has much room for the spread of energy conservation technology, investigational study was made with the aim of widely spreading energy conservation technology and solving environmental problems. This report summed up the tackling with environmental problems for making improvement in energy conservation. In the study of the CDM introduction based on the heat supply in Beijing city, conducted were the report on the research on the CDM introduction to coal-fired heat supply facilities and small gas boilers and the consideration of possibility/conditions/method of Japan's transfer of technically advanced space heating technology to China. In the study of 'advanced traffic system - Tsinghua University Green Campus Project,' carried out were the simulative study for grasp of the traffic flow in university, consideration of characteristics of exhaust gas at the time of car running on road and the road pollution mechanism, consideration of the study of electric cars considered of the environment. (NEDO)

  13. The animal feed and energy conservation properties of Avotan (Avoparcin)

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, C W [Strathclyde Univ., Glasgow (United Kingdom); O` Beirne, P [Cyanamid (United Kingdom) Ltd. (United Kingdom). Animal Health Div.

    1994-12-31

    AVOTAN, avoparcin is a glycopeptide antibiotic manufactured by Cyanamid (UK) via the fermentation of a strain of Streptomyces candidus. The gross energy requirement of manufacturing avoparcin is calculated and compared with the gross energy savings of feed utilisation when used in animal feeding regimes for broiler chickens, pigs, beef cattle and dairy cows for milk production. Avoparcin improves farm animal production in terms of liveweight gains and feed conversion efficiency. So, by conserving animal feed it conserves the energy which would have been expended to produce that animal feed. The energy savings thus calculated range from one to two orders of magnitude on an energy ratio basis and so are very significant. The widespread use of avoparcin in world agriculture is therefore very beneficial in an energy conservation context. (Author)

  14. Fiscal 2000 report on result of development project of marine resources utilization system for energy conservation. Development of marine resources utilization system for energy conservation (Model demonstrative research and basic study); 2000 nendo energy shiyo gorika kaiyo shigen katsuyo system kaihatsu jigyo seika hokokusho. Energy shiyo gorika kaiyo shigen katsuyo system kaihatsu (model jissho kenkyu oyobi kiban kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-05-01

    This paper explains the development of marine resources utilization system for energy conservation. The conceptual system is designed to take a large amount of deep sea water of 100 thousand to 1 million tons a day, to utilize it from the viewpoint of energy conservation using its coldness and purity characteristics, to then discharge it to the area of the sea in minimizing the environmental effect as well as obtaining effect such as absorption of carbon dioxide gas through cultivation of phyto-plankton. In pump-up technology, a piping system attaching on sea bed or floating with one or multiple constraints is applicable at present to all sites of geographical and oceanographic conditions. In utilization technology, use of deep-sea water as cooling water at a steam power plant, for example, improves generation efficiency by one point or more. In discharge and environment-related technologies, the research revealed that the deep-sea water from 300 m below releases carbon dioxide gas at surface, while photosynthesis can absorb the gas in the process of using nutrition contained in the deep-sea water; therefore, comprehensive examination is necessary taking energy utilization effect into account. Candidate sites were selected in areas of 200 m depth and within 5 km off-shore, with the optimum system examined at each site. (NEDO)

  15. Energy conservation and management system using efficient building automation

    Science.gov (United States)

    Ahmed, S. Faiz; Hazry, D.; Tanveer, M. Hassan; Joyo, M. Kamran; Warsi, Faizan A.; Kamarudin, H.; Wan, Khairunizam; Razlan, Zuradzman M.; Shahriman A., B.; Hussain, A. T.

    2015-05-01

    In countries where the demand and supply gap of electricity is huge and the people are forced to endure increasing hours of load shedding, unnecessary consumption of electricity makes matters even worse. So the importance and need for electricity conservation increases exponentially. This paper outlines a step towards the conservation of energy in general and electricity in particular by employing efficient Building Automation technique. It should be noted that by careful designing and implementation of the Building Automation System, up to 30% to 40% of energy consumption can be reduced, which makes a huge difference for energy saving. In this study above mentioned concept is verified by performing experiment on a prototype experimental room and by implementing efficient building automation technique. For the sake of this efficient automation, Programmable Logic Controller (PLC) is employed as a main controller, monitoring various system parameters and controlling appliances as per required. The hardware test run and experimental findings further clarifies and proved the concept. The added advantage of this project is that it can be implemented to both small and medium level domestic homes thus greatly reducing the overall unnecessary load on the Utility provider.

  16. Energy conservation and management strategies in Heavy Water Plants

    International Nuclear Information System (INIS)

    Kamath, H.S.

    2002-01-01

    In the competitive industrial environment it is essential that cost of the product is kept at the minimum possible. Energy conservation is an important aspect in achieving this as energy is one of the key recourses for growth and survival of industry. The process of heavy water production being very complex and energy intensive, Heavy Water board has given a focussed attention for initiating various measures for reducing the specific energy consumption in all the plants. The initiative resulted in substantial reduction in specific energy consumption and brought in savings in cost. The cumulative reduction of specific energy consumption has been over 30% over the last seven years and the total savings for the last three years on account of the same has been about Rs. 190 crore. The paper describes the strategies adopted in the heavy water plants for effecting the above achievements. The paper covers the details of some of the energy saving schemes carried out at different heavy water plants through case studies. The case studies of schemes implemented at HWPs are general in nature and is applicable for any other industry. The case studies cover the modifications with re-optimisation of the process parameters, improvements effected in utility units like refrigeration and cooling water systems, improvements in captive power plant cycle and improved recycle scheme for water leading to reduced consumptions. The paper also mentions the innovative ammonia absorption refrigeration with improved coefficient of performance and HWB's efforts in development of the system as an integrated unit of the ammonia water deuterium exchange process for heavy water production. HWB also has taken up R and D on various other schemes for improvements in energy consumption for future activities covering utilisation of low grade energy for generation of refrigeration. (author)

  17. An Empirical Study of the Impact of the Air Transportation Industry Energy Conservation and Emission Reduction Projects on the Local Economy in China

    Science.gov (United States)

    Chen, Yuxiu; Yu, Jian; Li, Li; Li, Linlin; Li, Long; Zhou, Jie; Chen, Quan

    2018-01-01

    Green development has been of particular interest to a range of industries worldwide, one of which being the air transportation industry (ATI). The energy conservation and emission reduction (ECER) projects of the ATI have a huge impact on the local economy. In this study, the input-output method was used to analyze the indirect economic impact of the implementation of the ECER projects of the ATI on the local economy of the Beijing-Tianjin-Hebei (BTH) region. We examined the direct benefits, backward spread effects, forward spread effects, and consumption multiplier effects. The final results showed that the comprehensive economic income from 2011–2013 in the BTH region reached RMB 4.74 billion. The results revealed that the ECER projects commissioned by the ATI were worth investing from both the economic and social benefits perspectives. To increase the green development effects and promote the sustainable development of the ATI, the special funds provided by the Civil Aviation Administration of China should be invested intensively in basic green technology research and setting green regulating and governance rules. PMID:29677160

  18. An Empirical Study of the Impact of the Air Transportation Industry Energy Conservation and Emission Reduction Projects on the Local Economy in China

    Directory of Open Access Journals (Sweden)

    Yuxiu Chen

    2018-04-01

    Full Text Available Green development has been of particular interest to a range of industries worldwide, one of which being the air transportation industry (ATI. The energy conservation and emission reduction (ECER projects of the ATI have a huge impact on the local economy. In this study, the input-output method was used to analyze the indirect economic impact of the implementation of the ECER projects of the ATI on the local economy of the Beijing-Tianjin-Hebei (BTH region. We examined the direct benefits, backward spread effects, forward spread effects, and consumption multiplier effects. The final results showed that the comprehensive economic income from 2011–2013 in the BTH region reached RMB 4.74 billion. The results revealed that the ECER projects commissioned by the ATI were worth investing from both the economic and social benefits perspectives. To increase the green development effects and promote the sustainable development of the ATI, the special funds provided by the Civil Aviation Administration of China should be invested intensively in basic green technology research and setting green regulating and governance rules.

  19. An Empirical Study of the Impact of the Air Transportation Industry Energy Conservation and Emission Reduction Projects on the Local Economy in China.

    Science.gov (United States)

    Chen, Yuxiu; Yu, Jian; Li, Li; Li, Linlin; Li, Long; Zhou, Jie; Tsai, Sang-Bing; Chen, Quan

    2018-04-20

    Green development has been of particular interest to a range of industries worldwide, one of which being the air transportation industry (ATI). The energy conservation and emission reduction (ECER) projects of the ATI have a huge impact on the local economy. In this study, the input-output method was used to analyze the indirect economic impact of the implementation of the ECER projects of the ATI on the local economy of the Beijing-Tianjin-Hebei (BTH) region. We examined the direct benefits, backward spread effects, forward spread effects, and consumption multiplier effects. The final results showed that the comprehensive economic income from 2011⁻2013 in the BTH region reached RMB 4.74 billion. The results revealed that the ECER projects commissioned by the ATI were worth investing from both the economic and social benefits perspectives. To increase the green development effects and promote the sustainable development of the ATI, the special funds provided by the Civil Aviation Administration of China should be invested intensively in basic green technology research and setting green regulating and governance rules.

  20. Bibliography for transportation energy conservation. [578 citations

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, Sarah J.

    1976-05-01

    A listing is given of 578 reports, books, articles, and conference papers on transportation and energy. Coverage is primarily on U. S. developments and research from 1970 to 1975. Following a section of citations of general works on energy, the bibliography contains two main parts: ''Energy for Transportation'' and ''Transportation of Energy.'' Within each of these topics the arrangement is multimodal (at the urban, regional, national, or international level), then by mode. Selected information sources are listed in the last part. Within each section, entries are arranged alphabetically by author or, lacking an author, by title. References were drawn from the Transportation Center Library collection and other libraries in the Northwestern University system. An earlier bibliography, Transportation and Energy, compiled by the Transportation Center Library in March 1974, forms the basis for the arrangement and provides coverage from 1970 to 1973.

  1. On Some Aspects of Energy Conservation in Industries

    Science.gov (United States)

    Rai, Keerti; Seksena, S. B. L.; Thakur, A. N.

    2016-06-01

    Energy demand has increased continuously due to advancement in technology and living standards of a large section of people resulting in a wide gap between supply and demand. One of the approaches to reduce this gap would be the adoption of measures of energy conservation in general and the efficient use of energy particularly in motor. This paper presents a review of the research activity in the field of efficiency optimization of three-phase induction motor drive. The approach is analyzed and the better option of energy conservation are identified.

  2. Energy conservation and the residential and commercial sector

    Science.gov (United States)

    1975-01-01

    A detailed analysis of energy conservation actions relevant to the residential and commercial sector has led to the conclusion that the potential for savings is great. The task will not be easy, however, since many of the actions require significant life style changes that are difficult to accomplish. Furthermore, many of the conservation actions cited as instant solutions to the energy crisis are those with only mid to long term potential, such as solar energy or heat pumps. Three significant conservation approaches are viable: adjusting price structure, mandating actions, and educating consumers. The first two appear to be the most feasible. But they are not without a price. Higher utility bills adversely affect the poor and the elderly on fixed incomes. Likewise, strict mandatory measures can be quite distasteful. But the effect of alternatives, such as voluntary savings accomplished through education processes, is minimal in a nation without a true conservation ethic.

  3. Overview topic paper on mass media energy conservation communications

    Energy Technology Data Exchange (ETDEWEB)

    Vertinsky, P; Vertinsky, I

    1979-02-01

    The utilization of information diffusion strategies to increase energy conservation knowledge and practices among the general population in Canada is discussed in terms of 5 media functions: information dissemination, remedial behavior modification, lifestyle decisions, initiating conservation action, and crisis management. Each of these functions is critically addressed in terms of media mix, message content and form, timing and intensity, exposure, and specific target populations. The diffusion strategies are then organized into a matrix of policy options to enable the appropriate one to be selected. Four major categories of energy conservation information considered are the nature of the energy problem, methods of conservation, results of conservation, and the individual consumer decision-making process. Heavy television exposure suggests this medium has enormous potential for informing Canadians on conservation issues. Print seems to be the main source of detailed, specialized, and sophisticated kinds of information. However, despite wide media availability, large numbers of the population consistently escape contact with widely reported information. Behavioral modification to change undesirable energy habits is examined from the perspectives of initial change and cultural/social change required to sustain new lifestyles. The use of mass media during crisis situations may be of essential importance for implementation of future energy policies. Information dissemination and responses to the mass media do not appear to have the same patterns during crisis and non-crisis situations. 279 refs.

  4. Recovery Act. Development of a Model Energy Conservation Training Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-07-05

    The overall objective of this project was to develop an updated model Energy Conservation training program for stationary engineers. This revision to the IUOE National Training Fund’s existing Energy Conservation training curriculum is designed to enable stationary engineers to incorporate essential energy management into routine building operation and maintenance tasks. The curriculum uses a blended learning approach that includes classroom, hands-on, computer simulation and web-based training in addition to a portfolio requirement for a workplace-based learning application. The Energy Conservation training program goal is development of a workforce that can maintain new and existing commercial buildings at optimum energy performance levels. The grant start date was July 6, 2010 and the project continued through September 30, 2012, including a three month non-funded extension.

  5. Energy conservation behavioural intention: attitudes, subjective norm and self-efficacy

    Science.gov (United States)

    Lee, J. W. C.; Tanusia, A.

    2016-08-01

    This paper examines the influence of attitude towards energy conservation at home, the attitude in the campus, subjective norm, and self-efficacy on energy conservation behavioural intention among students in a private university using the Theory of Planned Behaviour (TPB). Data was collected from about 194 students using a questionnaire developed from current literature on TPB. Data analysis using Smart PLS version 3.2.4 found that attitude towards energy conservation at home has an indirect significant influence on attitude towards energy conservation behavioural intention via the mediating effect of attitude towards energy conservation in the campus. Self-efficacy and subjective norm are also positively related to energy conservation intention. The study also indicates the suitability of the TPB in predicting behavioural intention through attitudes, subjective norms, and self-efficacy. Results suggest that energy education is vital in creating a positive attitude towards energy conservation while facilities managers in institutions need to formulate appropriate policies and regulations to inculcate the right attitude and behaviour towards energy saving.

  6. Essentials of energy technology sources, transport, storage, conservation

    CERN Document Server

    Fricke, Jochen

    2013-01-01

    An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

  7. 77 FR 24940 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2012-04-26

    ... 5-year average ratio with heating oil prices published in the Monthly Energy Review, but the propane... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program... and Renewable Energy, Department of Energy. ACTION: Notice. SUMMARY: In this notice, the U.S...

  8. 78 FR 9631 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-11

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Residential Boilers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting.... Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J...

  9. Use of vegetation to ameliorate building microclimates: an assessment of energy-conservation potentials

    Energy Technology Data Exchange (ETDEWEB)

    Hutchison, B.A.; Taylor, F.G.; Wendt, R.L.

    1982-04-01

    The space-conditioning energy conservation potentials of landscapes designed to ameliorate building microclimates are evaluated. The physical bases for vegetative modifications of climate are discussed, and results of past study of the effects of vegetation on space-conditioning energy consumption in buildings are reviewed. The state-of-the-art of energy-conserving landscape designs is assessed and recommendations are presented for further research.

  10. Conservation voltage regulation (CVR) applied to energy savings by voltage-adjusting equipment through AMI

    Science.gov (United States)

    Lan, B.-R.; Chang, C.-A.; Huang, P.-Y.; Kuo, C.-H.; Ye, Z.-J.; Shen, B.-C.; Chen, B.-K.

    2017-11-01

    Conservation voltage reduction (CVR) includes peak demand reduction, energy conservation, carbon emission reduction, and electricity bill reduction. This paper analyzes the energy-reduction of Siwei Feeders with applying CVR, which are situated in Penghu region and equipped with smart meters. Furthermore, the applicable voltage reduction range for the feeders will be explored. This study will also investigate how the CVR effect and energy conservation are improved with the voltage control devices integrated. The results of this study can serve as a reference for the Taiwan Power Company to promote and implement voltage reduction and energy conservation techniques. This study is expected to enhance the energy-reduction performance of the Penghu Low Carbon Island Project.

  11. Training program for energy conservation in new building construction. Volume III. Energy conservation technology for plan examiners and code administrators. Energy Conservation Technology Series 200

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Under the sponsorship of the United States Department of Energy, a Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. The subject of regulation of new building construction to assure energy conservation is recognized as one in which code officials have not had previous exposure. It was also determined that application of the model code would be made at varying levels by officials with both a specific requirement for knowledge and a differing degree of prior training in the state-of-the-art. Therefore, a training program and instructional materials were developed for code officials to assist them in the implementation and enforcement of energy efficient standards and codes. The training program for Energy Conservation Tehnology for Plan Examiners and Code Administrators (ECT Series 200) is presented.

  12. Conservation and Renewable Energy Program: Bibliography, 1988 edition

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, K.H. (comp.)

    1988-04-01

    The 831 references covering the period 1980 through Feb. 1988, are arranged under the following: analysis and evaluation, building equipment, building thermal envelope systems and materials, community systems and cogeneration, residential conservation service, retrofit, advanced heat engine ceramics, alternative fuels, microemulsion fuels, industrial chemical heat pumps, materials for waste heat utilization, energy conversion and utilization materials, tribology, emergency energy conservation,inventions, electric energy systems, thermal storage, biofuels production, biotechnology, solar technology, geothermal, and continuous chromatography in multicomponent separations. An author index is included.

  13. Downstream-based Scheduling for Energy Conservation in Green EPONs

    KAUST Repository

    Chen, Shen

    2012-05-01

    Maximizing the optical network unit’s (ONU) sleep time is an effective approach for achieving maximum energy conservation in green Ethernet passive optical networks (EPONs). While overlapping downstream and upstream ONU transmissions can maximize the ONU sleep time, it jeopardizes the quality of service (QoS) performance of the network, especially for downstream traffic in case the overlapping is based on the upstream time slot. In this paper, we study the downstream traffic performance in green EPONs under the limited service discipline and the upstream-based overlapped time window. Specifically, we first derive the expected mean packet delay, and then present a closed-form expression of the ONU sleep time, setting identical upstream/downstream transmission cycle times based on a maximum downstream traffic delay re-quirement. With the proposed system model, we present a novel downstream bandwidth allocation scheme for energy conservation in green EPONs. Simulation results verify the proposed model and highlight the advantages of our scheme over conventional approaches.

  14. Grant request: to implement energy conservation measures as part of the state original and supplemental energy conservation plans

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-16

    The program measures described in this document comprise a grant request to DOE under the Energy Policy and Conservation Act of 1975 and the Energy Conservation and Production Act of 1976. The amount requested, $5,555,000, will allow the extension, acceleration, and implementation of energy conservation activities already in progress in California. Accomplishments to date have included the adoption of residential standards, and the implementation of an energy survey program for public buildings. Efficiency standards have been established for refrigerators and room and central air conditioners, appliances which utilize a significant amount of residential energy. Before the end of 1977, efficiency standards will be established for clothes dryers, washers, and water heaters. Program elements are: technical/financial assistance; public awareness; standards setting; solar element; research/analysis/evaluation; and coordination and management.

  15. Conservation law of plants' energy value dependence of plants ...

    African Journals Online (AJOL)

    The plants differences in biochemical composition are analyzed, and the conservation law of energy value in plants is obtained. The link between the need for the nutrients and the plants biochemical composition is examined, Liebig's law is specified. Keywords: plant's biochemical composition, biochemistry, energy value in ...

  16. 77 FR 54839 - Energy Efficiency and Conservation Loan Program

    Science.gov (United States)

    2012-09-06

    ... CFR Parts 1710, 1717, 1721, 1724, and 1730 RIN 0572-AC19 Energy Efficiency and Conservation Loan..., proposing policies and procedures for loan and guarantee financial assistance in support of energy efficiency programs (EE Programs) sponsored and implemented by electric utilities for the benefit of rural...

  17. Conservation of Mechanical and Electric Energy: Simple Experimental Verification

    Science.gov (United States)

    Ponikvar, D.; Planinsic, G.

    2009-01-01

    Two similar experiments on conservation of energy and transformation of mechanical into electrical energy are presented. Both can be used in classes, as they offer numerous possibilities for discussion with students and are simple to perform. Results are presented and are precise within 20% for the version of the experiment where measured values…

  18. Analysis of alternative strategies for energy conservation in new buildings

    Science.gov (United States)

    Fang, J. M.; Tawil, J.

    1980-12-01

    The policy instruments considered include: greater reliance on market forces; research and development; information, education and demonstration programs; tax incentives and sanctions; mortgage and finance programs; and regulations and standards. The analysis starts with an explanation of the barriers to energy conservation in the residential and commercial sectors. Individual policy instruments are described and evaluated with respect to energy conservation, economic efficiency, equity, political impacts, and implementation and other transitional impacts. Five possible strategies are identified: (1) increased reliance on the market place; (2) energy consumption tax and supply subsidies; (3) Building Energy Performance Standards (BEPS) with no sanctions and no incentives; (4) BEPS with sanctions and incentives (price control); and (5) BEPS with sanctions and incentives (no price controls). A comparative analysis is performed. Elements are proposed for inclusion in a comprehensive strategy for conservation in new buildings.

  19. Energy conservation techniques as innovations, and their diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Darley, J M

    1978-04-01

    Many effective products, procedures, and techniques for achieving energy conservation have been discovered by researchers. This paper focuses on the conditions under which these procedures and techniques will be adopted voluntarily. It is suggested, first, that an economic incentive for the utilization of those energy-conserving techniques is not a sufficient condition for their adoption, and second, that a psychologically-based theory of the diffusion of innovation will identify the critical variables for promoting the adoption of energy-conserving products and techniques. Based on preliminary, small-scale observations of homeowners' reactions to a complex, time-controlled thermostat, the initial parameters of a diffusion theory for energy innovation are suggested.

  20. Energy conservation by hyperfiltration: food industry background literature survey

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-15

    The application of hyperfiltration to selected food product streams and food processing wastewaters for energy conservation was examined. This literature survey had led to the following conclusions: no research has been conducted in the food industry using membranes with hot process streams due to the temperature limitation (< 40/sup 0/C) of the typically studied cellulose acetate membranes; based on the bench-scale research reviewed, concentration of fruit and vegetable juices with membranes appears to be technically feasible; pretreatment and product recovery research was conducted with membranes on citrus peel oil, potato processing and brine wastewaters and wheys. The experiments demonstrated that these applications are feasible; many of the problems that have been identified with membranes are associated with either the suspended solids or the high osmotic pressure and viscosity of many foods; research using dynamic membranes has been conducted with various effluents, at temperatures to approx. 100/sup 0/C, at pressures to 1200 psi and with suspended solids to approx. 2%; and, the dynamic membrane is being prototype tested by NASA for high temperature processing of shower water. The literature review substantiates potential for dynamic membrane on porous stainless tubes to process a number of hot process and effluent streams in the food processing industry. Hot water for recycle and product concentrations are major areas with potential for economic application. The two plants involved in the first phase of the project should be reviewed to identify potential energy conservation applications. As many as possible of the conservation applications should be tested during the screening phase at each site. The most promising applications at each site should be evaluated more intensively to establish engineering estimates of the economics of this technology for the canned fruit and vegetable segment of the food industry.

  1. To conserve, or not to conserve ... : Large eddy simulation of wind farms with energy-conserving schemes

    NARCIS (Netherlands)

    Mehta, D.

    2016-01-01

    This thesis concerns the industrial application of large eddy simulation to wind farm aerodynamics. Through a series of simple tests, it presents the pros and cons of using energy-conserving time integration and furthers the importance of a dissipation-free spatial discretisation. Finally, it

  2. 1999 annual progress report -- Energy conservation team

    Energy Technology Data Exchange (ETDEWEB)

    Chalk, S. (EERE OTT Office of Advanced Automotive Technologies Energy Conversion Team Leader)

    1999-10-19

    This report highlights progress achieved during FY 1999 under the Light-duty Fuels Utilization R and D Program. The program is comprised of two elements: the Advanced Petroleum-Based APB Fuels Program which focused on developing and testing advanced fuels for use with compression-ignition direct-injection (CIDI) engines and fuel cells and the Alternative Fuels Program which focused on Natural gas and natural gas derived fuels. The report contains 17 summaries of industry and National Laboratory projects. Fuel efficient vehicles with very low emissions are essential to meet the challenges of climate change, energy security, and improved air quality. The authors anticipate cooperative efforts with the auto and energy industries to develop new and innovative technologies that will be used to make advanced transportation vehicles that are fuel efficient, clean, and safe.

  3. Can energy conservation and religion mix

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J

    1987-08-01

    Many churches share problems of inefficient heating systems, drafty windows, high ceilings, and poor insulation. The author has devised a four-stage method to evaluate the energy efficiency of a religious building and to develop recommendations for improvement. The suggested payback period is four years or less. This article describes the proposed method and highlights a successful project in Oshawa, Ontario as an example.

  4. Energy conservation in industry; Energibesparelser i erhvervslivet

    Energy Technology Data Exchange (ETDEWEB)

    Johanson, M. (Dansk Energi Analyse A/S (Denmark)); Maagoee Petersen, P. (Viegand and Maagoee ApS (Denmark))

    2010-02-15

    The report describes the completed survey and the methodology used for the analysis of energy saving opportunities and potentials for processing technologies and equipment in the industry. The report also includes a total of fourteen technology descriptions, of which eleven relate to end use of energy, while the three descriptions are for cross-technologies. The technology descriptions analyse any significant savings opportunities in the processing technologies concerned and work out the potentials of 'here and now' cost savings, with 2, 4 and 10-year payback time, respectively. The survey makes it possible to prioritize the instruments with the shortest payback times. The total savings potential for the eleven end-use technologies is estimated to be 10% at 2 years of payback time, 15% at four year payback time, and 32% at the 10 year payback time. The percentage potential is somewhat greater for the end-use technologies using electricity than the end-use which mainly uses fuel. That the potential is less for fuel-based end-use technologies may be explained by the fact that they are key processes that are regularly upgraded to increase product quality, to reduce production time and waste, etc. Such improvements also help to save energy and means that further improvements are relatively expensive. (ln)

  5. Energy efficiency and conservation in Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Samarasekura, S W.R.

    1983-01-01

    Sri Lanka is a tropical, predominantly agricultural island with a mixed population. The economy is rapidly expanding since 1977. So far the country is self-sufficient in rice, which is the staple food of the population. Indiscriminate cutting of forests for firewood resulted in a disastrous upsetting of the rain pattern. The existing capacity of hydro-electric power plants is not adequate to meet the demands of the rapidly growing industries and of households where the use of appliances increases dramatically with the progress of the economy. Periodic cut-offs of electric power supply became necessary. These are very harmful to industry. In order to keep the balance of payments in equilibrium, the government is fostering the development of new sources of foreign income, such as tourism and export of gems and spices. Remedies used to master the energy crisis are: the building of new hydroelectric plants, reforestation; introduction of ''kerosene stamps'' which will restrict the sale of this product at subsidized prices to the needy only; encouraging the use of fuel-efficient motorcycles in preference to automobiles; introduction (in cooperation with Honda) of alcohol-powered motorcycles; appointment of a Ministerial Committee endowed with broad powers to formulate and implement national energy policy. Although the general energy situation in Sri Lanka is rather bleak for the moment, it is confidently hoped that these measures will bear fruit in the long run.

  6. Promoting energy conservation in the rural areas

    International Nuclear Information System (INIS)

    Taale, K.D.

    2001-01-01

    It is estimated that more than 70% of the population of Ghana live in the rural areas. Cooking and heating in these areas are mainly achieved by fuelwood and other biomass. Although wood is a renewable energy resource, this is only so if it is grown faster than it is consumed. Firewood consumption exceeds forest growth in Ghana and other developing countries. Added to this, is the fact that the World's wood resource is used for such purposes as sawn timber, clearing of land and felling trees for agricultural purposes, etc. If our forests are to be preserved it is this population that has to be targeted. One method of reducing fuelwood demand is to encourage alternative supplies such as biogas (methane). Rural populations could be mobilized to construct bio-latrines in their communities to make use of the biogas generated to cook their food and also for heating purposes. Through levies, funds could be generated to undertake such projects in each community. Before this could be possible, a lot of education will have to be undertaken by the Renewable Energy unit of the Ministry of Mines and Energy. This is because many people are apprehensive of the idea of cooking with gas derived from their own feces. Some of the benefits to be derived from such a project are the use of the effluent slurry as high quality organic manure for farming. This will surely lead to increase food production and help to keep the environment clean (au)

  7. Conservation of energy and momentum in nonrelativistic plasmas

    International Nuclear Information System (INIS)

    Sugama, H.; Watanabe, T.-H.; Nunami, M.

    2013-01-01

    Conservation laws of energy and momentum for nonrelativistic plasmas are derived from applying Noether's theorem to the action integral for the Vlasov-Poisson-Ampère system [Sugama, Phys. Plasmas 7, 466 (2000)]. The symmetric pressure tensor is obtained from modifying the asymmetric canonical pressure tensor with using the rotational symmetry of the action integral. Differences between the resultant conservation laws and those for the Vlasov-Maxwell system including the Maxwell displacement current are clarified. These results provide a useful basis for gyrokinetic conservation laws because gyrokinetic equations are derived as an approximation of the Vlasov-Poisson-Ampère system.

  8. Energy Conservation of the Designated Government Buildings in Thailand

    Directory of Open Access Journals (Sweden)

    Wangskarn Prapat

    2016-01-01

    Full Text Available The designated government buildings have implemented and administered energy program under the energy development and promotion Act 2007 for many years continuously until 2015. Appointment person responsible for energy, performing energy management and implementing the energy conservation work plan and measures are legal requirements for the designated buildings. Therefore, the ministry of Energy has launched the project to support the implementation of energy management. The aim of the project was to create the energy management system in the designated government buildings, and to reduce energy consumption. In this paper, the evaluation of the project has been presented from the achievements of 839 designated government buildings. The energy saving is more than 440 ktoe/year. This is about 3% of energy consumptions of buildings.

  9. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M. (Dansk Energi Analyse A/S, Frederiksberg (Denmark)); Langkilde, G.; Olesen, Bjarne W. (Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark)); Moerck, O. (Cenergia Energy Consultants, Herlev (Denmark)); Sundman, O. (DONG Energy, Copenhagen (Denmark)); Engelund Thomsen, K. (Aalborg Univ., SBi, Hoersholm (Denmark))

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  10. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M [Dansk Energi Analyse A/S, Frederiksberg (Denmark); Langkilde, G; Olesen, Bjarne W [Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark); Moerck, O [Cenergia Energy Consultants, Herlev (Denmark); Sundman, O [DONG Energy, Copenhagen (Denmark); Engelund Thomsen, K [Aalborg Univ., SBi, Hoersholm (Denmark)

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  11. 10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates. [Reserved

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Small electric motors energy conservation standards and... CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation Standards § 431.446 Small electric motors energy conservation standards and their...

  12. A new mechanism for energy conservation technology services

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Feng

    1996-12-31

    In the ninth-five year plan of China, the socialist market economy model will be developed. In the stage of transferring from planning economy to market economy, the energy conservation technology services industry in China has met new challenges. Over the past ten to fifteen years, there has developed a new mechanism for financing energy efficiency investments in market economies. The process is simple. After inspecting an enterprise or an entity for energy saving opportunities, an Energy Service Company (ESCO) which business aimed at making money will review the recommended energy conservation opportunities with the enterprise or the entity (user) and implement those measures acceptable to the user at no front end cost to the user. The ESCO then guarantees that the energy savings will cover the cost of the capital renovations using the Performance Contracting.

  13. Transportation energy conservation data book: edition I. 5

    Energy Technology Data Exchange (ETDEWEB)

    Shonka, D B; Loebl, A S; Ogle, M C; Johnson, M L; Howard, E B

    1977-01-01

    This document contains statistical information on the major transportation modes, their respective energy consumption patterns, and other pertinent factors influencing performance in the transportation sector. Data relating to past, present, and projected energy use and conservation in the transportation sector are presented under seven chapter headings. These focus on (1) modal transportation characteristics, (2) energy characteristics of the transportation sector, (3) energy conservation alternatives involving the transportation sector, (4) government impacts on the transportation sector, (5) the supply of energy to the transportation sector, (6) characteristics of transportation demand, and (7) miscellaneous reference materials such as energy conversion factors and geographical maps. References are included for each set of data presented, and a more general bibliography is included at the end of the book. In addition, a glossary of key terms and a subject index is provided for the user. A second edition of this document is scheduled for publication in September 1977.

  14. Energy conservation investments: A comparison between China and the US

    International Nuclear Information System (INIS)

    Lin, Jiang

    2007-01-01

    Growth in energy consumption in China has soared from 2001 to 2004, driven largely by a booming economy and heavy investment in infrastructure and housing. In response, China has poured billions of dollars of investment in building power plants-at a rate of one large power plant (1000 MW) per week. In fact, China in 2004 has added the entire generating capacity of California or Spain in a single year. In contrast, investment in energy conservation projects has weakened considerably in recent years. This paper examines trends in energy efficiency investments in China and the US. The comparison highlights the potential of energy conservation investments in addressing China's current energy crisis as well as the inadequacy of such investments in China. Finally, the paper outlines a few scenarios for appropriate levels of investments in energy efficiency in China in the future

  15. Energy conservation through more efficient lighting.

    Science.gov (United States)

    Maya, J; Grossman, M W; Lagushenko, R; Waymouth, J F

    1984-10-26

    The efficiency of a mercury-rare gas electrical discharge, which forms the basis of a fluorescent lamp, can be increased about 5 percent simply by increasing the concentration of mercury-196 from 0.146 percent (natural) to about 3 percent. These findings can be implemented immediately without any significant change in the process of manufacturing of this widely used source of illumination, provided that mercury-196 can be obtained economically. The potential energy savings for the United States are estimated to be worth in excess of $200 million per year.

  16. Persuasive lighting : the influence of feedback through lighting on energy conservation behavior

    NARCIS (Netherlands)

    Ham, J.R.C.; Midden, C.J.H.; Maan, S.J.; Merkus, B.; Kort, de Y.A.W.; et al, xx

    2009-01-01

    Earlier research has investigated persuasive technology: Technology designed to influence human behavior or attitudes. The current research investigates lighting as persuasive technology. In an experimental study, participants could conserve energy while carrying out tasks and received feedback

  17. Energy literacy, awareness, and conservation behavior of residential households

    International Nuclear Information System (INIS)

    Brounen, Dirk; Kok, Nils; Quigley, John M.

    2013-01-01

    The residential sector accounts for one-fifth of global energy consumption, resulting from the requirements to heat, cool, and light residential dwellings. It is therefore not surprising that energy efficiency in the residential market has gained importance in recent years. In this paper, we examine awareness, literacy and behavior of households with respect to their residential energy expenditures. Using a detailed survey of 1721 Dutch households, we measure the extent to which consumers are aware of their energy consumption and whether they have taken measures to reduce their energy costs. Our results show that “energy literacy” and awareness among respondents is low: just 56% of the respondents are aware of their monthly charges for energy consumption, and 40% do not appropriately evaluate investment decisions in energy efficient equipment. We document that demographics and consumer attitudes towards energy conservation, but not energy literacy and awareness, have direct effects on behavior regarding heating and cooling of the home. The impact of a moderating factor, measured by thermostat settings, ultimately results in strong variation in the energy consumption of private consumers. - Highlights: • We use a detailed survey of 1,721 Dutch households to measure awareness and conservation behavior in energy consumption. • Energy literacy and awareness among residential households is low. • 40 percent of the sample does not appropriately evaluate investment decisions in energy efficient equipment • Demographics and consumer attitudes affect behavior regarding heating and cooling of a home

  18. Smarter by Degrees. Towards new instruments for energy conservation policy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-11-15

    Achieving the government's ambition of 1.5 to 2% energy savings annually will require every effort to be made. Households, small and medium-sized businesses, government and semi-governmental institutions (energy-extensive energy consumers) will also be able to make an important contribution. This group represents considerable savings potential of about 300 PJ. There are three types of instruments that may be used for this group to achieve the desired goal (1) obligation/prohibition, i.e., regulations and standards to demand energy efficient investments (construction, facilities, equipment, etc.); (2) price incentives (subsidies/taxes) to promote energy-efficient solutions; (3)enticement/influence, appealing to reason (information, arguments) or emotion to promote the right choice/behaviour. Analysis of past experiences presents the conclusion that so-called soft instruments are sometimes briefly effective but often have little or no effect. The Council believes, however, that such a conclusion is premature, as certain conditions were not met in the past that were very important to effectiveness. First, soft instruments must be implemented consistently and over the long term (about 4 years, at least). Appealing to the very diverse consumers also requires a custom approach. The tone of the conservation policy must also be more in tune with changing trends in society. Citizens must especially be appealed to in terms of cost advantages, responsible energy consumption (good housekeeping) and comfort, whereas the emphasis in the past lay on decency, solidarity and thrift. Specific action perspectives must also be offered. Partly on the basis of experience, such as in waste collection, the Council concludes that a well-assembled mix of soft and hard instruments will be necessary to encourage energy conservation. It is clear that soft instruments alone can be expected to produce unsatisfactory results. Therefore, a combination of soft and hard instruments is advocated

  19. 77 FR 38743 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Battery...

    Science.gov (United States)

    2012-06-29

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Battery Chargers and External Power Supplies AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue SW...

  20. 75 FR 31323 - Energy Efficiency Program: Energy Conservation Standards Furnace Fans: Public Meeting and...

    Science.gov (United States)

    2010-06-03

    .... EERE-2010-BT-STD-0011] RIN 1904-AC22 Energy Efficiency Program: Energy Conservation Standards Furnace Fans: Public Meeting and Availability of the Framework Document AGENCY: Office of Energy Efficiency and... Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies, EE-2J, 1000 Independence...

  1. 75 FR 13123 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2010-03-18

    ... that of heating oil, based on the 2004-2008 averages for these two fuels. The source for these price... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program... and Renewable Energy, Department of Energy. ACTION: Notice. SUMMARY: In this notice, the U.S...

  2. Airplane energy use and conservation strategies

    Energy Technology Data Exchange (ETDEWEB)

    Pilati, D.A.

    1974-05-01

    Domestic commercial airplane fuel use is examined as a function of stage length. A fuel use model is developed using the eight most popular airplanes. Short flights are very fuel inefficient; a 100-mile flight consumes 2.5 times as much fuel per passenger-mile than a 1,000-mile flight. Half of today's flights are for distances under 260 miles. Fuel consumption for purposes other than flying directly between airports is examined. Over 10% of total fuel use is for those portions of the flight in which no enroute distance is achieved. Delays account for at least 4.2% of the fuel consumption and auxiliary power units use over 1%. Fuel requirements for attempting to recover lost time and for fuel ferrying are also discussed. Airplane fuel efficiency can be increased in the short term by operational changes, particularly by increasing the load factor. A load factor increase from 50 to 60% would reduce airplane fuel use by 16% for the same traffic. Other options include reducing cruise speeds, increasing cruise altitudes, and changing ground operations. Each of these strategies offer savings of 1 to 3%. Total transportation energy use can be reduced by shifting air passengers to ground modes, especially for the inefficient short-stage traffic. Net energy savings for diverting half the flights under 200 miles to buses or trains is equivalent to 6% of the fleet fuel use. (6 tables, 6 fig., 36 references)

  3. Report on basic survey project for promoting joint implementation in 1999. Feasibility study on energy conservation and reduction of CO2 emission at Balikpapan Refinery

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an objective of implementation as the clean development mechanism (CDM), a survey was performed on energy conservation and CO2 reduction at Balikpapan Refinery in Indonesia with respect to reducing emission of greenhouse effect gases. A crude oil atmospheric distillation unit with a capacity of 200,000 BPSD, and a vacuum distillation unit with a capacity of 81,000 BPSD are in operation, which emit carbon dioxide of about 470,000 tons annually from fuels burned and consumed by these units. The result of the survey revealed that there is a room for improvement in heat recovery, and that these units are separated into two groups located far away with each other in distance, resulting in low thermal efficiency and wastes in fuel. Increase in heat recovery should be achieved, and fuel consumption in the heating furnace should be reduced. Energy saving technologies owned by JGC were applied to establish a modification plan. The plan calls for maximum annual reduction of carbon dioxide of about 61,000 tons at a reduction rate of 13%, and maximum annual fuel conservation of 190 times 10{sup 9} kcal at a saving rate of 13%. PERTAMINA also desires the realization thereof if technical and financial assistance is made available. The project has a significance that it would give a great impetus to the entire regions and industries. (NEDO)

  4. Key role for nuclear energy in global biodiversity conservation.

    Science.gov (United States)

    Brook, Barry W; Bradshaw, Corey J A

    2015-06-01

    Modern society uses massive amounts of energy. Usage rises as population and affluence increase, and energy production and use often have an impact on biodiversity or natural areas. To avoid a business-as-usual dependence on coal, oil, and gas over the coming decades, society must map out a future energy mix that incorporates alternative sources. This exercise can lead to radically different opinions on what a sustainable energy portfolio might entail, so an objective assessment of the relative costs and benefits of different energy sources is required. We evaluated the land use, emissions, climate, and cost implications of 3 published but divergent storylines for future energy production, none of which was optimal for all environmental and economic indicators. Using multicriteria decision-making analysis, we ranked 7 major electricity-generation sources (coal, gas, nuclear, biomass, hydro, wind, and solar) based on costs and benefits and tested the sensitivity of the rankings to biases stemming from contrasting philosophical ideals. Irrespective of weightings, nuclear and wind energy had the highest benefit-to-cost ratio. Although the environmental movement has historically rejected the nuclear energy option, new-generation reactor technologies that fully recycle waste and incorporate passive safety systems might resolve their concerns and ought to be more widely understood. Because there is no perfect energy source however, conservation professionals ultimately need to take an evidence-based approach to consider carefully the integrated effects of energy mixes on biodiversity conservation. Trade-offs and compromises are inevitable and require advocating energy mixes that minimize net environmental damage. Society cannot afford to risk wholesale failure to address energy-related biodiversity impacts because of preconceived notions and ideals. © 2014 The Authors Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

  5. 10 CFR 431.156 - Energy and water conservation standards and effective dates.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy and water conservation standards and effective dates. 431.156 Section 431.156 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM... Standards § 431.156 Energy and water conservation standards and effective dates. Each commercial clothes...

  6. Energy conservation and fuel substitution in Ube Kosan

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    After describing various changes in the Ube Kosan of Japan, an account is given of the history of the energy changeover and conservation being promoted by this company, together with details of the results of these measures and the company structures involved. Topics mentioned include imports of coal, the changeover to coal as a heat source in the production of cement and for the company's private power generation, the establishment of a coal centre, the organization of the drive towards energy conservation, the adoption of the SAVE technique, feedstock substitution, and the state of development of new processes.

  7. Low effectiveness of the energy conservation policy in the horticulture in the Netherlands

    International Nuclear Information System (INIS)

    Van Roozendaal, P.J.A.J.

    2003-01-01

    Between December 2000 and June 2002 the Netherlands Court of Audit ('Algemene Rekenkamer') carried out a study on the title subject, focusing on the effect of energy saving measures on the energy consumption per product unit in the greenhouse sector in the Netherlands for the period 1994-2000, including the effect of the energy conservation policy for the period 1997-1999 [nl

  8. Rock the Watt: An Energy Conservation Campaign at Pacific Northwest National Lab

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-01-01

    Case study describes Pacific Northwest National Laboratory's (PNNL) three-month Rock the Watt campaign to reduce energy use at its main campus in Richland, Washington. The campaign objectives were to educate PNNL employees about energy conservation opportunities in their workplace and to motivate them to help PNNL save energy and costs and to reduce greenhouse gas emissions.

  9. Study on energy efficient mushroom business in 2010. Highest feasible level of energy conservation and energy efficiency; Onderzoek naar het energiezuinig paddenstoelenbedrijf anno 2010. Hoogst haalbare niveau van energiereductie en energie-efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Suurmeijer, J.M.; Mikkers, E. [Grontmij, Amersfoort (Netherlands); Hilkens, J. [AdVisie, Herkenbosch (Netherlands)

    2010-06-15

    Targets of Dutch mushroom cultivation businesses include an energy efficiency improvement of 2.5% annually, implementation of sustainable energy options, and climate-neutral and economically viable cultivation by new mushroom cultivation businesses that are to be built in 2020. This report describes the measures that could be implemented in support of these targets [Dutch] De doelstellingen voor paddestoelenbedrijven zijn een energie-efficientie verbetering van 2,5% per jaar, implementatie van duurzame energieopties, en klimaatneutrale en economisch rendabele teelt van de in 2020 nieuw te bouwen paddenstoelenbedrijven. In dit rapport staan de maatregelen beschreven die genomen kunnen worden ter ondersteuning van de doelstellingen.

  10. Estimates of the potential for energy conservation in the Chinese steel industry

    International Nuclear Information System (INIS)

    Lin Boqiang; Wu Ya; Zhang Li

    2011-01-01

    The study evaluates the energy saving potential of the Chinese steel industry by studying its potential future energy efficiency gap. In order to predict the future energy efficiency gap, a multivariate regression model combined with risk analysis is developed to estimate future energy intensity of China's steel industry. It is found that R and D intensity, energy saving investment, labor productivity and industry concentration are all important variables that affect energy intensity. We assess the possible measures as to how China's steel industry can narrow the energy efficiency gap with Japan by means of scenario analysis. Using Japan's current energy efficiency level as baseline, the energy saving potential of China's steel industry is more than 200 million ton coal equivalent in 2008, and it would fall to zero in 2020. However, if greater efforts were made to conserve energy, it would be possible to narrow down the energy efficiency gap between China and Japan by around 2015. Finally, using the results of the scenario analysis, future policy priorities for energy conservation in China's steel industry are assessed in this paper. - Highlights: → The energy saving potential of the Chinese steel industry is evaluated. → A multivariate regression model combined with risk analysis is developed. → R and D, energy saving investment, labor, and structure affect energy intensity.→ The energy saving potential of China's steel industry would fall to zero in 2020.→ Future policy for energy conservation in China's steel industry are assessed.

  11. 78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

    Science.gov (United States)

    2013-09-03

    .... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards for Commercial Packaged Boilers AGENCY: Office of Energy Efficiency and..., Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-2J, 1000 Independence...

  12. Assessment of the industrial energy-conservation program. Final report of the Committee on Assessment of the Industrial Energy Conservation Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Industrial operations in the United States account for some 37% of the nation's consumptions of energy. It has been estimated that this figure will increase to 50% by 1990 unless appropriate industrial energy conservation measures are adopted. However, such measures are difficult to implement in spite of the potential of various existing, emerging, and advanced technologies that can be applied to the problem. Specifically, the application of many industrial energy conservation measures entails high economic, technological, and institutional risks and uncertainties that constrain industries from adopting such measures. Accordingly, in 1975 the federal government started a program designed to mitigate these risks and uncertainties via government-industry partnership arrangements in the interests of national energy conservation. An important element of this program is the Industrial Energy Conservation Program in the Federal Department of Energy (DOE). In June 1980, DOE asked the National Materials Advisory Board, a unit of the National Academy of Sciences-National Research Council, to form a study committee to assess the effectiveness of the Industrial Energy Conservation Program. The committee concluded that federal support embodied in the DOE program, present and planned, is important to conserving additional industrial energy. However, the committee also concluded that the program needs various improvements in project selection and management and in transfer of results to industry. The committee's findings and recommendations and the results of the deliberation of the committee's three panels, a special report on heat and power, and a report on the visit by four members of the committee to Japan are presented.

  13. Energy conservation goals: What people adopt, what they recommend, and why

    OpenAIRE

    Shahzeen Z. Attari; David H. Krantz; Elke U. Weber

    2016-01-01

    Failures to reduce greenhouse gas emissions by adopting policies, technologies, and lifestyle changes have led the world to the brink of crisis, or likely beyond. Here we use Internet surveys to attempt to understand these failures by studying factors that affect the adoption of personal energy conservation behaviors and also endorsement of energy conservation goals proposed for others. We demonstrate an asymmetry between goals for self and others (“I’ll do the easy thing...

  14. Energy conservation in developing countries using green building idea

    International Nuclear Information System (INIS)

    Rashid, Akram; Qureshi, Ijaz Mansoor

    2013-01-01

    Green buildings uses processes that are environmentally responsible and resource-efficient throughout a building's life-cycle. In these buildings Certain energy conservative and environment friendly steps are considered and implemented from design, construction, operation, maintenance and renovation. In present era no doubt new technologies are constantly constructed and used in creating greener structures, energy efficient buildings. The common objective is to reduce the overall impact of the built environment on human health using available energy efficiently. To increase the efficiency of the System or the building, Onsite generation of renewable energy through solar power, wind power, hydro power, or biomasscan significantly reduce the environmental impact of the building. Power generation is generally the most expensive feature to add to a building. Any how power generation using renewable sources that is Solar system may further enhance energy conservation ideas. Power Factor improvement can also be another source of efficient tool for efficient use of Electrical Energy in green buildings. In developing countries a significant amount of Electrical Energy can be conserved and System efficiency as a whole can be increased by Power Factor correction. The reverse flow of power can be locally engaged instead of creating extra stress and opposition to the existing grid lines.

  15. Implementing China's national energy conservation policies at state-owned electric power generation plants

    International Nuclear Information System (INIS)

    Zhao Xiaofan; Ortolano, Leonard

    2010-01-01

    China's 11th Five-Year Guideline identified energy conservation as one of the country's fundamental policies and established a mandatory target: 20% reduction in national average energy intensity by 2010. Despite the various policies, laws, and administrative reforms to support energy conservation, China fell behind schedule for meeting its conservation targets in 2006 and 2007. Using a combination of available literature and an interview-based case study, this paper examines the implementation of energy conservation and investigates impediments to achieving China's conservation goal in the electric power generation sector. Three key impediments are detailed: (1) municipal governments' incentives to overlook conservation-related central directives primarily because of budget pressures linked to financial decentralization, (2) procedural obstacles in the form of time required to obtain project approvals for high-efficiency power generation units, and (3) financial obstacles making it difficult for power generation enterprises to raise capital for energy conservation projects. An interview-based case study of a state-owned coal-fired electric power generation company demonstrates the influence of the aforementioned obstacles. While procedural obstacles are notable, they can be managed. However, electricity pricing reforms and/or stronger subsidy programs will be needed to address the financial obstacles facing Chinese power generation companies.

  16. Industrial energy conservation by methane fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Wise, D L

    1981-11-01

    An engineering study was conducted to evalutate the possibility of making an entire dairy cooperative self-sufficient by methane fermentation of the whey permeate from the cheese plant and the dairy cattle manure from the dairy farms to fuel gas. A cooperative consisting of 284 dairy farms and one central cheese plant producing 9.5 Gg of cheese annually was used as the basis for evaluation. The feasibility was evaluated at four practical levels of technology. Preliminary economic analysis revealed that the cost of methane was competitive with current prices for purchased fuel. (Refs. 29).

  17. Energy conservation aircraft design and operational procedures

    Energy Technology Data Exchange (ETDEWEB)

    Poisson-Quinton, P.

    1978-01-01

    The paper reviews studies associated with improved fuel efficiency. Several aircraft design concepts are described including: (1) increases in aerodynamic efficiency through decreased friction drag, parasitic drag, and drag due to lift, (2) structural efficiency and the implementation of composite materials, (3) active control technology, (4) the optimization of airframe-engine integration, and (5) VTOL and STOL concepts. Consideration is also given to operational procedures associated with flight management, terminal-area operations, and the influence of environmental noise constraints on fuel economy.

  18. Operation of buildings: Energy supply and energy conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, H

    1985-01-01

    Energy saving in public administration. A list-like collection of the measures to monitor the consumption, the measures of saving energy at existing buildings, new systems and by new techniques. Examples with figures for the savings achieved in the region of Marburg-Biedenkopf (Hesse). Guidelines are set up which are mainly based on energy saving, heat recovery, use of new technologies and renewable energy sources, fluidized-bed combustion also in smaller plants of ca. 2 MW, waste management separating wastes into burnable/unburnable, information of the public administration and the people and the setting up of energy concepts. (PJH).

  19. Jersey City energy conservation demonstration program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Newbold, R.F.

    1978-08-01

    The Aerospace Corporation, the City Government, and the Board of Education of Jersey City have conducted a group of energy-conservation experiments to explore a number of conservation techniques believed to offer quick payback and to be of wide applicability. Experiments include the updating and/or rehabilitation of the energy-consuming features of old buildings and installation of devices designed to minimize energy losses caused by human error or laxity. Specific examples include: upgrading of the deteriorated and inefficient steam-distribution system of the city hall (originally constructed in 1894); an extensive program of reducing infiltration in an old school building; use of several timing devices in connection with heating, ventilation, and lighting systems to encourage energy-conservation practices; retrofit of school classrooms with high-pressure sodium lamps; and demonstration of practical and cost-effective ways of increasing the efficiency of conventional steam boilers. The report presents: the nature of the selected experiments; technical, human, and organizational factors that proved significant in performing and evaluating the experiments; discussions of observations and lessons learned; and general recommendations for an extended program of energy conservation in local governments. It is emphasized that, in retrofit of existing buildings, the unexpected is commonplace; and the habits and attitudes of building occupants are elements of the system that must always be taken into account. This report shows the benefits of energy saving, cost saving, and added comfort that may be attained by retrofitting old buildings, noting typical complications that arise. The effectiveness of the conservation methods is presented in terms of costs relative to effective payback periods calculated from results of their application in Jersey City.

  20. Analysis to develop a program for energy conservation in irrigated agriculture

    Energy Technology Data Exchange (ETDEWEB)

    Cone, B.W.; Brix, V.L.; Eakin, D.E.; Laughlin, B.M.

    1978-09-01

    It is estimated by the FEA that 0.26 quadrillion Btus of energy is annually required to irrigate crops in the USA. The development of a DOE program for energy conservation in irrigation is described. Information is included on: studies of how this energy consumption can be reduced and by how much; engineering and economic studies of irrigation equipment and methods; proposals for improving the efficiency of pumps and prime movers; projects selected for demonstrating irrigation energy conservation; and recommendations for further research. (LCL)

  1. 76 FR 39245 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-07-06

    ... Wes.Anderson@ee.doe.gov . Mr. Eric Stas or Ms. Jennifer Tiedeman, U.S. Department of Energy, Office of.... Wesley Anderson (central air conditioners and heat pumps), U.S. Department of Energy, Office of Energy...

  2. 24 CFR 968.115 - Modernization and energy conservation standards.

    Science.gov (United States)

    2010-04-01

    ... changing or installing a new utility system, conduct a life-cycle cost analysis, reflecting installation... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Modernization and energy conservation standards. 968.115 Section 968.115 Housing and Urban Development Regulations Relating to Housing...

  3. 41 CFR 101-25.112 - Energy conservation policy.

    Science.gov (United States)

    2010-07-01

    ... Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 25-GENERAL 25.1... procurement and property management documents reflect the policy set forth in paragraph (b) of this section... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Energy conservation...

  4. Energy conservation law for randomly fluctuating electromagnetic fields

    International Nuclear Information System (INIS)

    Gbur, G.; Wolf, E.; James, D.

    1999-01-01

    An energy conservation law is derived for electromagnetic fields generated by any random, statistically stationary, source distribution. It is shown to provide insight into the phenomenon of correlation-induced spectral changes. The results are illustrated by an example. copyright 1999 The American Physical Society

  5. A Quantification of the Energy Savings by Conservation Voltage Reduction

    NARCIS (Netherlands)

    Ellens, W.; Berry, A.; West, S.

    2013-01-01

    The introduction of `Smart grid' technologies in the electricity supply industry has attracted new attention to Conservation Voltage Reduction (CVR). CVR is a method that aims to save energy by reducing the voltage level of the electrical distribution network. However, not all devices consume less

  6. Administrative memo relative to the delivery of energy conservation certificates

    International Nuclear Information System (INIS)

    2006-07-01

    This memo details the principles of the energy conservation certificates, the law texts of application, the part of the Government and the ADEME services, the certificates demand procedure, and the inscription of the certificates on the national registries. (A.L.B.)

  7. The Energy Conservation Guide 98/99; ENOEK guiden 99

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Norwegians have the world's largest electricity consumption per capita. This booklet aims to advice house owners on efficient use of energy. The main sections discuss the concept of energy conservation in general, heating, stoves and fireplaces, central heating, insulation and sealing, windows, hot water, water saving, lighting, domestic appliances, ventilation, outdoor facilities, and finally gives some tips on investments and profitability and how to obtain expert advice. The booklet is profusely illustrated.

  8. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy

    2001-08-06

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  9. Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

    International Nuclear Information System (INIS)

    2001-01-01

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects

  10. Exactly energy conserving semi-implicit particle in cell formulation

    International Nuclear Information System (INIS)

    Lapenta, Giovanni

    2017-01-01

    We report a new particle in cell (PIC) method based on the semi-implicit approach. The novelty of the new method is that unlike any of its semi-implicit predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. Recent research has presented fully implicit methods where energy conservation is obtained as part of a non-linear iteration procedure. The new method (referred to as Energy Conserving Semi-Implicit Method, ECSIM), instead, does not require any non-linear iteration and its computational cycle is similar to that of explicit PIC. The properties of the new method are: i) it conserves energy exactly to round-off for any time step or grid spacing; ii) it is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency and allowing the user to select any desired time step; iii) it eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length; iv) the particle mover has a computational complexity identical to that of the explicit PIC, only the field solver has an increased computational cost. The new ECSIM is tested in a number of benchmarks where accuracy and computational performance are tested. - Highlights: • We present a new fully energy conserving semi-implicit particle in cell (PIC) method based on the implicit moment method (IMM). The new method is called Energy Conserving Implicit Moment Method (ECIMM). • The novelty of the new method is that unlike any of its predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. • The new method is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency. • The new method eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length. • These

  11. Exactly energy conserving semi-implicit particle in cell formulation

    Energy Technology Data Exchange (ETDEWEB)

    Lapenta, Giovanni, E-mail: giovanni.lapenta@kuleuven.be

    2017-04-01

    We report a new particle in cell (PIC) method based on the semi-implicit approach. The novelty of the new method is that unlike any of its semi-implicit predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. Recent research has presented fully implicit methods where energy conservation is obtained as part of a non-linear iteration procedure. The new method (referred to as Energy Conserving Semi-Implicit Method, ECSIM), instead, does not require any non-linear iteration and its computational cycle is similar to that of explicit PIC. The properties of the new method are: i) it conserves energy exactly to round-off for any time step or grid spacing; ii) it is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency and allowing the user to select any desired time step; iii) it eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length; iv) the particle mover has a computational complexity identical to that of the explicit PIC, only the field solver has an increased computational cost. The new ECSIM is tested in a number of benchmarks where accuracy and computational performance are tested. - Highlights: • We present a new fully energy conserving semi-implicit particle in cell (PIC) method based on the implicit moment method (IMM). The new method is called Energy Conserving Implicit Moment Method (ECIMM). • The novelty of the new method is that unlike any of its predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. • The new method is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency. • The new method eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length. • These

  12. Decision support for energy conservation promotion: an analytic hierarchy process approach

    International Nuclear Information System (INIS)

    Kablan, M.M.

    2004-01-01

    An effective energy conservation program in any country should encourage the different enterprises, utilities and individuals to employ energy efficient processes, technologies, equipment, and materials. Governments use different mechanisms or policy instruments such as pricing policy (PP), regulation and legislation (RL), training and education, fiscal and financial incentives (FFI), and R and D to promote energy conservation. Effective implementation of energy conservation policies requires prioritization of the different available policy instruments. This paper presents an analytic hierarchy process (AHP) based modeling framework for the prioritization of energy conservation policy instruments. The use of AHP to support management in the prioritization process of policy instruments for promoting energy conservation is illustrated in this research using the case study of Jordan. The research provided a comprehensive framework for performing the prioritization in a scientific and systematic manner. The four most promising policy instruments for promoting energy conservation in Jordan are RL (37.4%), followed by FFI (22.2%), PP (18.0%), and Training, education and qualification (14.5%). One of the major advantages of the use of the AHP approach is that it breaks a large problem into smaller problems which enables the decision-maker (DM) to have a better concentration and to make more sound decisions. In addition, AHP employs a consistency test that can screen out inconsistent judgements. The presented methodology of the research might be beneficial to DMs in other countries

  13. Selecting appropriate energy efficiency indicators for the Thai Energy Conservation Promotion Programme. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Eichhammer, W.; Gruber, E.; Cremer, C.

    2000-06-01

    In 1992 the Thai Government passed the Energy Conservation Promotion (ECP) Act to improve energy efficiency in Thai industry and commerce. The Thai-German Energy Efficiency Promotion Project (ENEP) is supporting the Department of Energy Development and Promotion (DEDP) in its effort to implement the Energy Conservation Program for large buildings and designated factories. About 4000 buildings and factories under the Compulsory Program, have to report every 6 months their energy consumption data to DEDP. Every 3 years energy audits have to be conducted by registered energy consultants, to identify energy saving opportunities, to set saving targets and to recommend energy conservation measures. Investments in energy efficient technologies are subsidized from an Energy Conservation Fund. Data from the energy consumption reports and the energy audit reports are collected in DEDP's database for further processing. The database is structured according to the Thai Standard Industrial Classification. In order to exploit the wealth of information provided by the auditing procedure the objective of the present work carried out by the consultant FhG-ISI for DEDP/BERC on behalf of the German Gesellschaft fuer Technische Zusammenarbeit (GTZ) was to recommend an appropriate set of energy efficiency indicators. This indicator set should allow DEDP to extract from the energy consumption reports, energy audit reports and other sources, useful statistical information to monitor and improve energy efficiency in Thailand. (orig.)

  14. Current situation of energy conservation in high energy-consuming industries in Taiwan

    International Nuclear Information System (INIS)

    Chan, D.Y.-L.; Yang, K.-H.; Hsu, C.-H.; Chien, M.-H.; Hong, G.-B.

    2007-01-01

    Growing concern in Taiwan has arisen about energy consumption and its adverse environmental impact. The current situation of energy conservation in high energy-consuming industries in Taiwan, including the iron and steel, chemical, cement, pulp and paper, textiles and electric/electrical industries has been presented. Since the energy consumption of the top 100 energy users (T100) comprised over 50% of total industry energy consumption, focusing energy consumption reduction efforts on T100 energy users can achieve significant results. This study conducted on-site energy audits of 314 firms in Taiwan during 2000-2004, and identified potential electricity savings of 1,022,656 MWH, fuel oil savings of 174,643 kiloliters (KL), steam coal savings of 98,620 ton, and natural gas (NG) savings of 10,430 kilo cubic meters. The total potential energy saving thus was 489,505 KL of crude oil equivalent (KLOE), representing a reduction of 1,447,841 ton in the carbon dioxide emissions, equivalent to the annual carbon dioxide absorption capacity of a 39,131-ha plantation forest

  15. Large scale study on the variation of RF energy absorption in the head and brain regions of adults and children and evaluation of the SAM phantom conservativeness

    International Nuclear Information System (INIS)

    Keshvari, J; Kivento, M; Christ, A; Bit-Babik, G

    2016-01-01

    This paper presents the results of two computational large scale studies using highly realistic exposure scenarios, MRI based human head and hand models, and two mobile phone models. The objectives are (i) to study the relevance of age when people are exposed to RF by comparing adult and child heads and (ii) to analyze and discuss the conservativeness of the SAM phantom for all age groups. Representative use conditions were simulated using detailed CAD models of two mobile phones operating between 900 MHz and 1950 MHz including configurations with the hand holding the phone, which were not considered in most previous studies. The peak spatial-average specific absorption rate (psSAR) in the head and the pinna tissues is assessed using anatomically accurate head and hand models. The first of the two mentioned studies involved nine head-, four hand- and two phone-models, the second study included six head-, four hand- and three simplified phone-models (over 400 configurations in total). In addition, both studies also evaluated the exposure using the SAM phantom. Results show no systematic differences between psSAR induced in the adult and child heads. The exposure level and its variation for different age groups may be different for particular phones, but no correlation between psSAR and model age was found. The psSAR from all exposure conditions was compared to the corresponding configurations using SAM, which was found to be conservative in the large majority of cases. (paper)

  16. Large scale study on the variation of RF energy absorption in the head & brain regions of adults and children and evaluation of the SAM phantom conservativeness

    Science.gov (United States)

    Keshvari, J.; Kivento, M.; Christ, A.; Bit-Babik, G.

    2016-04-01

    This paper presents the results of two computational large scale studies using highly realistic exposure scenarios, MRI based human head and hand models, and two mobile phone models. The objectives are (i) to study the relevance of age when people are exposed to RF by comparing adult and child heads and (ii) to analyze and discuss the conservativeness of the SAM phantom for all age groups. Representative use conditions were simulated using detailed CAD models of two mobile phones operating between 900 MHz and 1950 MHz including configurations with the hand holding the phone, which were not considered in most previous studies. The peak spatial-average specific absorption rate (psSAR) in the head and the pinna tissues is assessed using anatomically accurate head and hand models. The first of the two mentioned studies involved nine head-, four hand- and two phone-models, the second study included six head-, four hand- and three simplified phone-models (over 400 configurations in total). In addition, both studies also evaluated the exposure using the SAM phantom. Results show no systematic differences between psSAR induced in the adult and child heads. The exposure level and its variation for different age groups may be different for particular phones, but no correlation between psSAR and model age was found. The psSAR from all exposure conditions was compared to the corresponding configurations using SAM, which was found to be conservative in the large majority of cases.

  17. 75 FR 27227 - Energy Conservation Program: Energy Conservation Standards for Residential Central Air...

    Science.gov (United States)

    2010-05-14

    ...-7335. E-mail: Wes.Anderson@ee.doe.gov . Ms. Elizabeth Kohl, U.S. Department of Energy, Office of the... additional information regarding visiting the Resource Room. FOR FURTHER INFORMATION CONTACT: Mr. Wes Anderson, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building...

  18. Energy conservation through utilization of mechanical energy storage

    Science.gov (United States)

    Eisenhaure, D. B.; Bliamptis, T. E.; Downer, J. R.; Heinemann, P. C.

    Potential benefits regarding fuel savings, necessary technology, and evaluation criteria for the development of flywheel-hybrid vehicles are examined. A case study is quoted in which adoption of flywheel-hybrid vehicles in a taxi fleet would result in an increase of 10 mpg average to 32 mpg. Two proposed systems are described, one involving direct engine power to the flywheel and the second regenerating the flywheel from braking energy through a continuously variable transmission. Fuel consumption characteristics are considered the ultimate determinant in the choice of configuration, while material properties and housing shape determine the flywheel speed range. Vehicle losses are characterized and it is expected that a flywheel at 12,000 rpm will experience less than one hp average parasitic power loss. Flywheel storage is suitable for smaller engines because larger engines dominate the power train mass. Areas considered important for further investigation include reliability of an engine run near maximum torque, noise and vibration associated with flywheel operation, start up delays, compatibility of driver controls, integration of normal with regenerative braking systems, and, most importantly, the continuously variable transmission.

  19. Skating on Thin Ice: Evolution of Conservation in Energy Policy

    Science.gov (United States)

    Gibbons, Jack

    2009-05-01

    Why are we physicists so often drawn into the nexus of energy policy and governance? There are several explanations. First, we are quite accustomed to this phenomenon of ``cause and effect,'' so we instinctively examine those two ends as well as the connections between them (i.e., what happens between a lump of coal and a light bulb). That way of thinking makes energy production and consumption intiminately connected and ``conservation'' naturally becomes a technological strategy rather than an appendage. Strangely, however, ``conservation'' in our society (called ``The Cowboy Economy'' by economist Kenneth Boulding) has been widely interpreted as competitive with supply and ridiculed as only a minor option, entailing denial of an amenity. After nearly a half-century of dialogue, innovation, and frustration, the rationality of what I call the ``physics'' perspective seems to have come of age. The evolution of relevant science and technology and public policy has advanced markedly, reflected and sustained at the national level by a succession of organizations. The Congressional Office of Technology Assessment, the Federal Office of Energy Conservation, the Federal Energy Administration, the U.S. Department of Energy, and the Office of Science and Technology Policy. Not surprisingly, physicists continue to play key roles in the inculcation of science and analysis into the policy and governance. This requires, as implied by C.P. Snow, a bridging and strengthening of the thin ice between science and society. We still have a long road to travel.

  20. NCSU solar energy and conservation house. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-01

    A passive solar energy house has been built adjacent to the NCSU McKimmon Continuing Education Center. The house contains a two-story embedded sunspace, two Trombe walls, active solar hot water heating, thermal storage in a rock filled ceiling/floor, and numerous research treatments, and energy conservation features. (See attached photo brochure; Appendix 1). The house is completely decorated and furnished in an attractive manner and the exterior architecture is traditional and has broad consumer appeal. It is also thoroughly instrumented to monitor performance. The house is open to the public on weekends and numerous people come to visit on their own initiative and others take advantage of the close proximity to McKimmon while there attending conferences. The house will influence and motivate large numbers of people to consider solar and energy conservation facets in their homes and will provide data to substantiate performance to prospective home buyers and meaningful data on design and construction for builders.

  1. Planning an energy-conserving policy for Taiwan based on international examples of success

    International Nuclear Information System (INIS)

    Lu, S.-M.; Huang, Y.-S.; Lu, J.-M.

    2008-01-01

    Taiwan lacks indigenous energy resources and imports 99% of its energy supply. This heavy energy-dependence represents a hidden threat for Taiwan's energy security and economic development. The most effective solution thus is to adopt an energy-conservation policy, similar to those successfully implemented in certain highly developed countries, such as the UK, the USA, Japan, and Germany. From the successful experiences of these countries, this study proposes a general mechanism of increasing energy efficiency by 2% annually, together with an executive master plan, followed by a scenario breakdown for energy-conserving policy in Taiwan. The feasibility of these proposals has been confirmed by the finding that their achievements in terms of energy saving and CO 2 emission reduction conform to the goals of the 'Taiwan National Energy Conference 2005'

  2. A policy of nuclear energy or energy conservation - on the construction of a wrong alternative

    International Nuclear Information System (INIS)

    Traube, K.

    1981-01-01

    From the content: a secret good-bye - wrong information from the energy experts - is there any priority for the efficient utilization of energie - do nuclear energy and energy conservation measures complement each other - the hidden socio-political dimensions - counter-information is necessary. (HP) [de

  3. Targeting water and energy conservation using big data

    Science.gov (United States)

    Escriva-Bou, A.; Pulido-Velazquez, M.; Lund, J. R.

    2016-12-01

    Water conservation is often the most cost effective source of additional water supply for water stressed regions to maintain supply reliability with increasing population and/or demands, or shorter-term droughts. In previous research we demonstrated how including energy savings of conserved water can increase willingness to adopt conservation measures, at the same time that increases energy and GHG emissions savings. But the capacity to save water, energy and GHG emissions depends fundamentally in the economic benefits for customers and utilities. Utilities have traditionally used rebates, subsidies or incentives to enhance water conservation. But the economic benefits originated by these rebates depend on the actual savings of the water, energy and GHG emissions. A crucial issue that is not considered in the financial analysis of these rebates is the heterogeneity in water consumption, resulting in rebating households that actually do not need improvements in certain appliances. Smart meters with end-use disaggregation allow to consider this heterogeneity and to target rebates. By using an optimization approach that minimizes water and energy residential costs—accounting for retrofit costs and individual benefits according to previous levels of consumption—we are able to assess economically optimal rebate programs both for customers and utilities. Three programs are considered: first, same economic incentives are provided to all households and then they do their optimal decisions; second, traditional appliance-focused rebates are assessed; and third, utilities provide only rebates to those households that maximize water, energy or GHG emissions savings. Results show that the most economically efficient options for households are not the best options for utilities, and that traditional appliance-focused rebates are much less optimal than targeted rebates.

  4. Energy conservation and the environment: conflict or complement

    Energy Technology Data Exchange (ETDEWEB)

    Schipper, L.

    1978-09-01

    The policy discussion following the Oil Embargo was clouded with fears of a return to a primitive existence based on drastically reduced energy inputs to society, or, on the other hand, an abandoning of environmental goals, allegedly a major barrier to development of new energy supplies. Often the energy use associated with environmental improvements was cited as a reason for expanding energy supplies, as if to say that a conflict existed between a clean environment and reductions in energy use. Or it was argued that a relaxation of environmental goals would lower the direct costs of harvesting and using energy and thereby alleviate the need for energy conservation. It has also been argued that the geopolitics of energy alone will force us to substitute riskier or ''dirtier'' energy sources for relatively clean oil and gas. Indeed, there is no question that the relationship among energy, the environment, and economic well-being is complicated. This essay sorts out many of the confusing aspects in order to show how goals relating to the efficient use of energy are aligned both with traditional economic goals and with modern environmental goals. To do this the author analyzes in depth the role of energy in the economy and, using examples, traces the origins of many of the misconceptions about that role--misconceptions that have inhibited a profound discussion of energy-related goals.

  5. Gyrokinetic energy conservation and Poisson-bracket formulation

    International Nuclear Information System (INIS)

    Brizard, A.

    1989-01-01

    An integral expression for the gyrokinetic total energy of a magnetized plasma, with general magnetic field configuration perturbed by fully electromagnetic fields, was recently derived through the use of a gyrocenter Lie transformation. It is shown that the gyrokinetic energy is conserved by the gyrokinetic Hamiltonian flow to all orders in perturbed fields. An explicit demonstration that a gyrokinetic Hamiltonian containing quadratic nonlinearities preserves the gyrokinetic energy up to third order is given. The Poisson-bracket formulation greatly facilitates this demonstration with the help of the Jacobi identity and other properties of the Poisson brackets

  6. 78 FR 42389 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2013-07-16

    ... conditioners without reverse cycle and with louvered sides as 24,999 British thermal units per hour (Btu/ h... and with louvered sides as 25,000 Btu/h, rather than 27,999 Btu/h and 28,000 Btu/h, respectively...: Stephen L. Witkowski, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy...

  7. Report of fiscal 1999 basic survey for joint implementation, etc. Feasibility study on energy conservation and reduction of CO2 emission at Omsk Refinery

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This paper explains fiscal 1999 survey on energy conservation and reduction of CO2 at Omsk Refinery in the Russian Federation for the purpose of making the project tied to the COP3 joint implementation. This refinery is the largest class refinery in Russia having a capacity of 600,000 BPSD. The atmospheric distillation unit AVT-10, which emits 470,000 t-CO2/year, was selected for the object of the survey. As the modification plans, optimization of process system, modification of waste heat boiler and installation of new furnaces were considered. The plans 1, 2 are possible due to their low investment costs. The plan 3 to install new furnaces is able to reduce the large volume of CO2 emission though its investment cost is higher. For each modification plan, estimation was made for the investment cost, the benefit by energy saving and the volume of reduction of CO2 emission. The results for each of the plans 1, 2 and 3 were 907x10{sup 3}, 3,377x10{sup 3}, 50,400x10{sup 3} in US$; 535x10{sup 3}, 928x10{sup 3}, 1,407x10{sup 3} in US$; and 36.1x10{sup 3}, 68.2x10{sup 3}, 86.6x10{sup 3} tons/year. The Russian side showed their satisfaction of the results and keen interest in the energy saving effect. For the purpose of realizing this plan, financial assistance and technological cooperation are essential. Russia shows their great expectations for the Japanese government. (NEDO)

  8. Energy conservation options for cooking with biomass in Ghana

    DEFF Research Database (Denmark)

    Nielsen, Per Sieverts; Næraa, Rikke; Karlsson, Kenneth

    1996-01-01

    Cooking is the main energy consuming activity in Ghana. This is mainly due to a generally low material standard of living, but also because the cooking process itself is energy inefficient. The fuel for cooking in Ghana is mainly biomass either in the form of wood, agricultural residues or charcoal....... An energy chain for the cooking process is established and the possible conservation options are surveyed in kitchen performance tests in Abodom in the tropical zone of Ghana. The energy consumption for the food preparation has been measured and energy saving options have been determined for some parts...... point has been reached. Most cooks tend to continue using a high heat supply even though it is not necessary. This process is often carried out without lid on the pot even though the use of lid will reduce the energy loss considerably. It is also concluded that the average fuelwood consumption in Abodom...

  9. Energy conservation and sustainable economic growth: The case of Latin America and the Caribbean

    International Nuclear Information System (INIS)

    Chang, Ching-Chih; Soruco Carballo, Claudia Fabiola

    2011-01-01

    This study examines the causal relationships among energy consumption, economic growth and carbon dioxide emissions in twenty countries from Latin America and the Caribbean region. The methodology includes the use of Phillips and Perron (PP) tests, a cointegration model with vector error correction modeling (VECM) and vector autoregression (VAR) with Granger causality. The study concludes that of the twenty countries analyzed, only in four of them will it be possible to implement energy conservation polices without affecting their economic growth, four others are not able to consider an energy conservation policy with economic growth, and the other twelve should focus on their economic growth before adopting any conservation policies. Energy efficiency was found in this region, especially in the countries which have both cointegration and short-term equilibrium. - Highlights: → Only four countries could implement energy conservation polices without affecting economic growth. → Twelve nations should focus on their economic growth before designing any energy conservation policies. → Energy efficiency was found in the countries which have both cointegration and short-term equilibrium.

  10. Conservation and solar energy program: congressional budget request, FY 1982

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    Funding summaries are presented for the Conservation and Solar Energy Program funding information and program overview on energy conservation (Volume 7 of 7, DOE/CR-0011/2) are included for the Buildings and Community Systems, Industrial, Transportation; State and Local, Multi-Sector, Energy Impact Assistance, and Residential/Commercial retrofit programs. Funding information and program overviews on solar technology (Volume 2 of 7, DOE/CR-011/2) are included for Active and Passive Solar Heating and Cooling, Photovoltaics Energy Systems, Solar Thermal Power Systems, Biomass Energy Systems, Wind Energy Conversion Systems, Ocean Systems, Solar International Activities, Solar Information Systems, SERI Facility, MX-RES, Program Direction, and Alcohol Fuels programs. Information and overviews on energy production, demonstration, and distribution (Volume 6 of 7, DOE/CR-0011/2) are given for the solar program. A funding summary and a program overview are included for electrochemical and physical and chemical storage systems as appearing in DOE/CR-0011/2, Volume 3 of 7. Relevant tabulated data from the FY 1981. Request to the Congress are presented for Supplementals, Rescissions, and Deferrals. (MCW)

  11. Residential energy use and conservation in Venezuela: Results and implications of a household survey in Caracas

    Energy Technology Data Exchange (ETDEWEB)

    Figueroa, M.J.; Ketoff, A.; Masera, O.

    1992-10-01

    This document presents the final report of a study of residential energy use in Caracas, the capital of Venezuela. It contains the findings of a household energy-use survey held in Caracas in 1988 and examines options for introducing energy conservation measures in the Venezuelan residential sector. Oil exports form the backbone of the Venezuelan economy. Improving energy efficiency in Venezuela will help free domestic oil resources that can be sold to the rest of the world. Energy conservation will also contribute to a faster recovery of the economy by reducing the need for major investments in new energy facilities, allowing the Venezuelan government to direct its financial investments towards other areas of development. Local environmental benefits will constitute an important additional by-product of implementing energy-efficiency policies in Venezuela. Caracas`s residential sector shows great potential for energy conservation. The sector is characterized by high saturation levels of major appliances, inefficiency of appliances available in the market, and by careless patterns of energy use. Household energy use per capita average 6.5 GJ/per year which is higher than most cities in developing countries; most of this energy is used for cooking. Electricity accounts for 41% of all energy use, while LPG and natural gas constitute the remainder. Specific options for inducing energy conservation and energy efficiency in Caracas`s residential sector include energy-pricing policies, fuel switching, particularly from electricity to gas, improving the energy performance of new appliances and customer information. To ensure the accomplishment of an energy-efficiency strategy, a concerted effort by energy users, manufacturers, utility companies, government agencies, and research institutions will be needed.

  12. Potential environmental effects of energy conservation measures in northwest industries

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  13. Baseline energy forecasts and analysis of alternative strategies for airline fuel conservation

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    The objectives of this study were to identify measures to reduce airline fuel consumption and to evaluate the impact of these alternatives on fuel consumption through 1990. To evaluate the impact of fuel conservation strategies, baseline forecasts of airline activity and energy consumption to 1990 were developed. Alternative policy options to reduce fuel consumption were identified and analyzed for three baseline levels of aviation activity within the framework of an aviation activity/energy consumption model. By combining the identified policy options, a strategy was developed to provide incentives for airline fuel conservation. Strategies and policy options were evaluated in terms of their impact on airline fuel conservation and the functioning of the airline industry as well as the associated social, environmental, and economic costs. The need for strategies to conserve airline fuel is based on air transportation's dependence upon petroleum; the current lack of alternative energy sources; the potential for disruption of air service due to crises in fuel availability such as experienced during the OPEC oil embargo; and the overall national goal of energy independence through energy conservation in all consuming sectors. The transition from the current situation to that described by strategies and policy options may require difficult adjustments by the airline industry in the short term. In the long term, however, conservation strategies can enhance the health of the airline industry as well as its fuel efficiency.

  14. Survey of energy conservation in India: priorities and policy dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Pachauri, R K

    1983-01-01

    The formulating and implementing of an energy conservation policy in India was delayed, because emphasis was placed upon an increase of energy production in the mistaken belief that this is tantamount to an improvement in the standard of life. Statistical data of energy production according to its source and of its consumption by individual sectors of the national economy are presented. They show that by far the largest turnover is in energy derived from firewood and vegetable and animal waste for domestic use in rural India. Although a very great potential for energy conservation exists in this domain, its implementation on a large scale is hardly practicable because it would affect many millions of village households with very different life styles dictated by varying natural conditions in individual areas of the country. Energy derived from oil and coal is used rather wastefully mainly because of obsolete equipment and technology. There is a vast scope for improvement in this area and appropriate measures have been initiated by the Government. The demand for oil derivatives for transportation is increasing dangerously, mainly because of dieselization of the national railways and of development of motorized road transport. A turnaround of this trend would require, however, a restructuring of the Indian transportation system.

  15. 77 FR 18477 - Energy Conservation Program: Energy Conservation Standards for Battery Chargers and External...

    Science.gov (United States)

    2012-03-27

    .... Summary of the Proposed Rule A. Benefits and Costs to Consumers B. Impact on Manufacturers C. National.... Discount Rates 12. Benefits From Effects of Standards on Energy Prices H. Consumer Subgroup Analysis I... Impact Analysis a. Significance of Energy Savings b. Net Present Value of Consumer Costs and Benefits c...

  16. 76 FR 20089 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-04-11

    ... discussed the following major issues at the public meeting: the pros and cons of various efficiency metrics... of Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington... copies. 4. Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies...

  17. 76 FR 22324 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-04-21

    ... standards, the current standards for room air conditioners and clothes dryers, and the history of the... Residential Clothes Dryers and Room Air Conditioners AGENCY: Office of Energy Efficiency and Renewable Energy... equipment, including residential clothes dryers and room air conditioners. EPCA also requires the U.S...

  18. 75 FR 41102 - Energy Conservation Program: Energy Conservation Standards for Furnace Fans: Reopening of Public...

    Science.gov (United States)

    2010-07-15

    ... Furnace Fans: Reopening of Public Comment Period AGENCY: Office of Energy Efficiency and Renewable Energy... work of residential heating and cooling systems (``furnace fans''). The comment period closed on July 6... information relevant to the furnace fan rulemaking will be accepted until July 27, 2010. ADDRESSES: Interested...

  19. Volumetric formulation of lattice Boltzmann models with energy conservation

    OpenAIRE

    Sbragaglia, M.; Sugiyama, K.

    2010-01-01

    We analyze a volumetric formulation of lattice Boltzmann for compressible thermal fluid flows. The velocity set is chosen with the desired accuracy, based on the Gauss-Hermite quadrature procedure, and tested against controlled problems in bounded and unbounded fluids. The method allows the simulation of thermohydrodyamical problems without the need to preserve the exact space-filling nature of the velocity set, but still ensuring the exact conservation laws for density, momentum and energy. ...

  20. Energy conservation normatives in Italy: Thermotechnical Committee organizational efforts

    Energy Technology Data Exchange (ETDEWEB)

    Casagrande, A [Comitato Termotecnico Italiano, Milan (Italy)

    1991-10-01

    A recent Italian law (No. 10/91) calls for energy conservation to be implemented in building materials and HVAC systems through the creation of a suitable set of normatives. The CTI (Italian Thermotechnical Committee) has been assigned the task of creating these normatives and is currently in the organizational stage. This paper lists the proposed normatives and reports on CTI's progress in assembling groups of consultants from various sectors - public administration, end users, industrial firms, etc.

  1. Identification of energy conservation research opportunities: a review and synthesis of the literature

    Energy Technology Data Exchange (ETDEWEB)

    Hopp, W.J.; Hane, G.J.; Gurwell, W.E.; Hauser, S.G.; Williford, R.E.; Williams, T.A.; Ashton, W.B.

    1982-03-01

    Thirty-eight studies of energy conservation research opportunities are reviewed. The 38 studies chosen for review include many of the major efforts in the identification of energy conservation research and development (R and D) opportunities and provide a representative sample of the types of studies that have been performed. The sample includes studies that focus on specific energy use (e.g., auto transport), as well as studies that focus on specific types of research (e.g., materials science). The sample also includes studies that can be further contrasted in terms of long-term vs. short-term projects, evolutionary vs. revolutionary ideas, generic vs. process-specific activities, and technology base research vs. hardware development. Each of these perspectives contributes toward assuring coverage of the breadth of energy conservation R and D opportunities. In each review the technical or end-use focus is described, the research ideas identified in the study are listed, and a critical summary is given. The reviews also indicate whether the studies present end-use consumption data, estimate potential energy savings, estimate times to commercialization, summarize existing research programs, or describe the identification methodology. In Section 2.0 the various research studies are compared. In Section 3.0 the characteristics of an aggregate list of research ideas are discussed. The characteristics were collected from the research opportunities studies, which are included in Appendix A. Appendix A contains a compilation of energy conservation R and D opportunities arranged by energy end-use applications. Appendix B contains an outline of the format followed in writing the critical reviews of the studies, the individual study reviews, and the extended bibliography of 88 studies that describe energy conservation research opportunities.

  2. Application of economic principles in energy conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharyya, A

    1976-01-01

    The point of departure for the selection of any energy-conserving policy is the availability of (at least) two practical options or alternatives for policy maker at enterprise level. In real life, in the same point of time, or in the same geographical location, there could be several energy conservation options for the same industrial process. One need only set up a pairwise comparison of two options at a time and answer the question: which option is the most desirable from the energy conservation standpoint. Which option is the most desirable from the purchaser's point of view. If one takes both these factors into account, which option is socially the most desirable. We have explained two economic techniques (Life Cycle Cost (LCC), Market Acceptance) and their integration to compare two systems at a time. To begin with, a policy maker at enterprise level can carry out LCC. As technology progresses over time, Market Acceptance estimation may be warranted. Finally, Cost-Benefit Analysis may be applied to overall evaluation of competing projects which have involvement of large social groups, and wider foreign exchange implications.

  3. Machine learning of accurate energy-conserving molecular force fields

    Science.gov (United States)

    Chmiela, Stefan; Tkatchenko, Alexandre; Sauceda, Huziel E.; Poltavsky, Igor; Schütt, Kristof T.; Müller, Klaus-Robert

    2017-01-01

    Using conservation of energy—a fundamental property of closed classical and quantum mechanical systems—we develop an efficient gradient-domain machine learning (GDML) approach to construct accurate molecular force fields using a restricted number of samples from ab initio molecular dynamics (AIMD) trajectories. The GDML implementation is able to reproduce global potential energy surfaces of intermediate-sized molecules with an accuracy of 0.3 kcal mol−1 for energies and 1 kcal mol−1 Å̊−1 for atomic forces using only 1000 conformational geometries for training. We demonstrate this accuracy for AIMD trajectories of molecules, including benzene, toluene, naphthalene, ethanol, uracil, and aspirin. The challenge of constructing conservative force fields is accomplished in our work by learning in a Hilbert space of vector-valued functions that obey the law of energy conservation. The GDML approach enables quantitative molecular dynamics simulations for molecules at a fraction of cost of explicit AIMD calculations, thereby allowing the construction of efficient force fields with the accuracy and transferability of high-level ab initio methods. PMID:28508076

  4. Energy conservation in selected buildings, Gdansk. 1. final report

    International Nuclear Information System (INIS)

    1997-02-01

    This Final Report marks the end of the implementation stage of the project: 'Energy Conservation in Selected Buildings in Gdansk, Poland' supported by the Danish Environment-related Energy Sector Programme for Poland under the Danish Energy Agency. The residential and commercial sectors together with public buildings account for 40-45% of the total energy consumption and are dominated by the use of space heating and hot water. The sector has a significant over-consumption of energy, which first of all is due to the lack of or too weak incentives for the individual tenants to decrease the energy consumption. Bad thermal insulation of buildings and inefficient central heating systems with a widespread lack of measurement and automatic control systems give cause for extensive heat losses. The objective of the project has been to document the effects of energy savings in 18 multi-family houses when different types of energy saving measures are applied. These measures include thermal insulation of buildings, refurbishment of the heating system and introduction of individual billing system for heating and hot tap water. Energy audits of 18 buildings were performed by combination of on-site inspection of all buildings and data collection from the available drawings, technical descriptions, etc. The on-site inspection was carried out by use of an energy audit scheme specially developed for this project. (EG)

  5. Energy conservation in selected buildings, Gdansk. 1. final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This Final Report marks the end of the implementation stage of the project: `Energy Conservation in Selected Buildings in Gdansk, Poland` supported by the Danish Environment-related Energy Sector Programme for Poland under the Danish Energy Agency. The residential and commercial sectors together with public buildings account for 40-45% of the total energy consumption and are dominated by the use of space heating and hot water. The sector has a significant over-consumption of energy, which first of all is due to the lack of or too weak incentives for the individual tenants to decrease the energy consumption. Bad thermal insulation of buildings and inefficient central heating systems with a widespread lack of measurement and automatic control systems give cause for extensive heat losses. The objective of the project has been to document the effects of energy savings in 18 multi-family houses when different types of energy saving measures are applied. These measures include thermal insulation of buildings, refurbishment of the heating system and introduction of individual billing system for heating and hot tap water. Energy audits of 18 buildings were performed by combination of on-site inspection of all buildings and data collection from the available drawings, technical descriptions, etc. The on-site inspection was carried out by use of an energy audit scheme specially developed for this project. (EG)

  6. Conflicts in Everyday Life: The Influence of Competing Goals on Domestic Energy Conservation

    OpenAIRE

    Anneli Selvefors; I. C. MariAnne Karlsson; Ulrike Rahe

    2015-01-01

    A common approach for understanding people’s domestic energy behavior is to study the influence of deterministic factors, such as attitudes, norms and knowledge, on behavior. However, few studies have succeeded in fully explaining people’s behavior based on these factors alone. To further the understanding of people’s everyday energy use, a goal-oriented approach based on activity theory has been applied to discuss energy conservation from a multiple goal perspective based on the findings fr...

  7. Towards energy self sufficiency in the North: Energy conservation and forest biomass

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    A symposium was held to address the issues of controlling energy demand through conservation, and increasing the range of energy supply using forest products (biomass) as a renewable alternative to fossil fuels in Canada's northern climates. Sections on retrofitting of thermal insulation, production of wood fuels, and unconventional energy analyses of these technologies are included. Separate abstracts have been prepared for 23 papers.

  8. The effect of building regulations and energy conservation measures in domestic sector on national energy consumption

    International Nuclear Information System (INIS)

    Samo, S.R.; Akhund, M.A.; Brohi, K.M.

    2004-01-01

    In England, housing accounts for some 30% of total fuel consumption and a similar proportion of energy-related carbon dioxide (CO/sub 2/) emission. A study has been conducted to analyse the effect of the legislations and UK thermal building regulations on national energy consumption in housing. This research paper presents data on the percentage of dwelling stock, the energy consumption, energy cost and carbon dioxide (CO/sub 2/) emission in different types of dwellings, which comply different building regulations from 1965 to 1995. It was found that. 66% of the dwelling stock, which comply the building Regulations before 1965, consumes 73% of total energy used in housing. This dwelling stock is also responsible for 75% of carbon dioxide (CO/sub 2/) emission. Whereas currently only 4% of the dwelling stock complies the latest building regulations 1995 which consume 2 % of energy and produce a similar percentage of carbon dioxide (CO/sub 2/) emission in housing. Since the large portion of the dwelling stock is comprised of old dwellings, therefore the greatest potential for energy conservation measures can be found in improving these dwellings instead of constructing new dwellings. (author)

  9. Feasibility study on energy conservation and reduction of CO2 emissions using RDF (refused derived fuel) at a Chinese cement plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The feasibility study was conducted on a project in China for energy saving and greenhouse gas emission reduction by introducing the energy-saving and alternative energy technologies in cement plants. The cement plant selected for the feasibility study is Shanghai Plant of Shanghai Allied Cement Co., Ltd. (SAC), for RDF receive and supply facility, chlorine bypass facility, exhaust heat power generation facility and RDF production facility. The study results indicate that the exhaust power generation can save energy of 4,700 tons/y as crude, or energy saving rate of 25.5%, and that replacing part of coal by RDF and exhaust power generation can reduce CO2 emissions by 25,500 and 18,500 tons/y, respectively. For the investment recovery, it is estimated that the investment can be recovered in 9 years, and the project value is 81.399 million Yuan with the initial investment and project profit in each year discounted to the present value. These results fail to satisfy the SAC's investment standards. (NEDO)

  10. Feasibility study on energy conservation and reduction of CO2 emissions using RDF (refused derived fuel) at a Chinese cement plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The feasibility study was conducted on a project in China for energy saving and greenhouse gas emission reduction by introducing the energy-saving and alternative energy technologies in cement plants. The cement plant selected for the feasibility study is Shanghai Plant of Shanghai Allied Cement Co., Ltd. (SAC), for RDF receive and supply facility, chlorine bypass facility, exhaust heat power generation facility and RDF production facility. The study results indicate that the exhaust power generation can save energy of 4,700 tons/y as crude, or energy saving rate of 25.5%, and that replacing part of coal by RDF and exhaust power generation can reduce CO2 emissions by 25,500 and 18,500 tons/y, respectively. For the investment recovery, it is estimated that the investment can be recovered in 9 years, and the project value is 81.399 million Yuan with the initial investment and project profit in each year discounted to the present value. These results fail to satisfy the SAC's investment standards. (NEDO)

  11. Application of energy conservation technologies in Indian industries

    International Nuclear Information System (INIS)

    Zubair, K.M.

    1992-01-01

    The quadrupling of oil prices in 1973 signaled the beginning of a crises period for the oil importing countries. It hampered the economic growth of developed and developing countries alike. The pace of industrialization slowed down, recession set in and the oil importing developing nations found their balance of payment situation steadily going worse. The second increase of oil prices in 1979 further compounded the problems. It did seem that the problem of economic growth and increasing debt burden was intractable as far as developing nations were concerned. Behind this turmoil were the faint stirrings of alternative actions that sought to wean the world from its oil and fossil fuel dominated economies. These alternatives ranged from harnessing renewable energy sources, such as solar, wind and biomass to implementing end-use energy efficiency strategies. A major lesson of the oil crunch era was that energy efficiency is tangible resource by itself that competes economically with contemporary energy supply options. In addition to this, four major national priorities, viz, economic competitiveness, utilization of scare capital for development, environmental quality and energy security through oil dependence provided an urgent rationale for saving energy. While conservation consciousness has already taken roots in Pakistan industry, it needs to be nurtured and gains need to be consolidated. The need of the hour is to take stock of the situation elsewhere, particularly in similar geographical and socio-economic situations, and plan for an energy efficient tomorrow. This article attempts to delineate the notable developments that have taken place in the application of energy conservation technologies in the Indian industries. These efforts have had a salutary effect on the Indian value added sector which was saddled with old plant and machinery designed in the era of cheap energy. (author)

  12. 77 FR 7281 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Science.gov (United States)

    2012-02-10

    ... Electrical Efficiencies for all Liquid-Immersed Distribution Transformer Equipment Classes (Compliance... ``customers.'' Customers refer to electric utilities in the case of liquid-immersed transformers, and to... for Determining Energy Efficiency for Distribution Transformers'' published by the National Electrical...

  13. Profit by conserving energy in your restaurant. Economies d'energie et profits a la carte

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This manual is aimed at the Canadian restaurant sector with a view of promoting sound energy conservation practices. Monitoring is recommended to identify energy consumption and measure results of a conservation effects. These efforts can be done with respect to selection, operation, and maintenance of restaurant equipment used in food preparation, HVAC systems, refrigeration, water heating, and lighting. Overall building design and planning of new installations are also considered. 27 figs.

  14. Managing post-therapy fatigue for cancer survivors using energy conservation training.

    Science.gov (United States)

    Yuen, Hon Keung; Mitcham, Maralynne; Morgan, Larissa

    2006-01-01

    This pilot study evaluated the effectiveness of energy conservation training to help post-therapy cancer survivors manage their fatigue. Twelve post-therapy cancer survivors were randomly assigned to an energy conservation training or usual care control (6 in each group). Participants in the intervention group received 1 to 2 hours of individual, face-to-face energy conservation training from an occupational therapist followed by once-a-week telephone monitoring sessions in the subsequent three weeks. Participants in the control group received standard care from their oncologist. Analysis of pre- and post-training data from the Piper Fatigue Scale (PFS) revealed significant reduction only in the sensory subscale of the PFS (Z = 2.21; p = 0.027) for the intervention group; but no significant reduction in the four subscale or total scores of the PFS for the control group. Findings demonstrate partial support for the effectiveness of energy conservation training in helping post-therapy cancer survivors manage their fatigue. Energy conservation training seems to be a viable strategy for managing cancer-related fatigue, though its efficacy is modest. Incorporating specific energy restoration strategies such as relaxation and meditation for future research may help advance the growing body of knowledge in symptom management for post-therapy cancer survivors.

  15. Energy conservation in China: Key provincial sectors at two-digit level

    International Nuclear Information System (INIS)

    Liao, Hua; Du, Jian; Wei, Yi-Ming

    2013-01-01

    Highlights: ► We identify the keys for energy conversation across China’s 31 provinces × 65 sectors. ► The results are visualized in map and matrix tables, and easy for use. ► 39 Industrial sectors by province are classified into three categories for conservation. ► There is large energy wasting in the public management sector. ► There are both urban–rural gap and provincial inequality on electricity consumption. - Abstract: In March 2011, China’s central government set a new challenging target of reducing its energy intensity by 16% during 2011–2015, after it had achieved a reduction of 19.1% during 2006–2010. And this new target was assigned to provincial authorities in August 2011. However, China’s provincial energy-economic developments are unbalanced and different provinces have different key sectors for energy conservation. Most previous studies focused on provincial energy efficiency at the aggregate level, or the three-industry level (or one-digit level). However, whether for policy decision or academic research, it is necessary to further subdivide the sectors. In this paper, we use three indicators (Gini Coefficient, energy consumption share and energy intensity) to compare provincial energy conservation potentials at the two-digit sector level. To our knowledge, this paper is the first one to identify the keys for energy conversation across the 31 provinces × 65 sectors. And the results are shown in visualized maps and matrix tables to help identify the key province × sectors for energy conservation easier. This also helps the central and provincial governments to distinguish key sectors when they monitor the energy conservation progress

  16. Energy Conservation Projects to Benefit the Railroad Industry

    Energy Technology Data Exchange (ETDEWEB)

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction

  17. 78 FR 77019 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-20

    ... air conditioning heat pump'' that were established in section 5 of the American Energy Manufacturing... heat pump'' product class, including the definition and standards. DATES: DOE will accept comments....gov . Table of Contents I. Background and Authority II. Discussion III. Procedural Requirements A...

  18. 78 FR 7296 - Energy Conservation Program: Energy Conservation Standards for Small, Large, and Very Large...

    Science.gov (United States)

    2013-02-01

    ... Unit Challenge (RTU Challenge). This program provides a market mechanism that reduces barriers for... commercial air-cooler air conditioners and heat pumps in the field. \\7\\ U.S. Department of Energy. Building... the IEER more than the EER for commercial air conditioners and heat pumps. D. Engineering Analysis The...

  19. 75 FR 23191 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Certain...

    Science.gov (United States)

    2010-05-03

    ... Impact Analysis The NIA estimates the national energy savings (NES) and the net present value (NPV) of... to public comments. Accordingly, DOE intends to present the results of its analyses in the notice of... the real consumer cost of capital and puts the LCC in present-value terms. The PBP represents the...

  20. 76 FR 57515 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2011-09-15

    ... Contents I. Summary of the Final Rule and Its Benefits II. Introduction A. Authority B. Background 1... Wine Coolers From This Rulemaking 2. Product Classes a. General Discussion Regarding Added Product... Cost per Unit 4. Site-to-Source Energy Conversion 5. Discount Rates 6. Benefits From Effects of...

  1. 75 FR 59469 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2010-09-27

    .... Methodology and Discussion A. Market and Technology Assessment 1. Exclusion of Wine Coolers From This.... Benefits From Effects of Standards on Energy Prices H. Consumer Subgroup Analysis I. Manufacturer Impact.... Net Present Value of Consumer Costs and Benefits c. Indirect Impacts on Employment 4. Impact on...

  2. 76 FR 26656 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-05-09

    ... (202) 586-2945 or e-mail: [email protected] . FOR FURTHER INFORMATION CONTACT: Stephen L...: stephen[email protected] . Ms. Elizabeth Kohl, U.S. Department of Energy, Office of General Counsel.... 6291-6309; 28 U.S.C. 2461 note. 2. Revise Sec. 430.32 paragraphs (b), and (h) to read as follows: Sec...

  3. 77 FR 2355 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-01-17

    ... advantages; distributive impacts; and equity); (4) to the extent feasible, specify performance objectives... Defense Council (NRDC), the Northwest Energy Efficiency Alliance (NEEA), and the Northwest Power and... Strategic Plan commits the Department to reviewing minimum appliance efficiency standards at least every 5...

  4. Local policies for DSM: the UK's home energy conservation act

    International Nuclear Information System (INIS)

    Jones, E.; Leach, M.

    2000-01-01

    Residential energy use accounts for approximately 28 per cent of total primary energy use in the UK, with consumption in this sector forecast to increase due partly to expanding numbers of households. Finding ways to reduce residential energy consumption must form a key part of the climate change strategies of the UK and all developed countries. In 1995, an innovative piece of legislation was passed in the UK, devolving residential energy efficiency responsibility to local government. Under 'The Home Energy Conservation Act' (HECA), local authorities are obliged to consider the energy efficiency of private as well as public housing stock. Authorities were given a duty to produce a strategy for improving residential energy efficiency in their area by 30 per cent in the next 10-15 years. This paper describes the enormous variation in the quality of local authorities' strategies and discusses reasons for this variation. Based on a nationwide survey of HECA lead officers, it considers the opportunities and constraints facing local authorities, and what has been achieved to-date under the Act. It also examines how HECA fits into the UK's national energy policy and explains the roles of other institutions across the public, private and voluntary sector in facilitating implementation of the Act. Finally, the paper considers how other countries can learn from the UK's HECA experience and can use the Act as a template to apply the principle of subsidiarity to this area of environmental policy. (Author)

  5. Renewable energy and conservation measures for non-residential buildings

    Science.gov (United States)

    Grossman, Andrew James

    The energy demand in most countries is growing at an alarming rate and identifying economically feasible building retrofit solutions to decrease the need for fossil fuels so as to mitigate their environmental and societal impacts has become imperative. Two approaches are available for identifying feasible retrofit solutions: 1) the implementation of energy conservation measures; and 2) the production of energy from renewable sources. This thesis focuses on the development of retrofit software planning tools for the implementation of solar photovoltaic systems, and lighting system retrofits for mid-Michigan institutional buildings. The solar planning tool exploits the existing blueprint of a building's rooftop, and via image processing, the layouts of the solar photovoltaic arrays are developed based on the building's geographical location and typical weather patterns. The resulting energy generation of a PV system is estimated and is utilized to determine levelized energy costs. The lighting system retrofit analysis starts by a current utilization assessment of a building to determine the amount of energy used by the lighting system. Several LED lighting options are evaluated on the basis of color correlation temperature, color rendering index, energy consumption, and financial feasibility, to determine a retrofit solution. Solar photovoltaic installations in mid-Michigan are not yet financially feasible, but with the anticipated growth and dynamic complexity of the solar photovoltaic market, this solar planning tool is able to assist building proprietors make executive decisions regarding their energy usage. Additionally, a lighting system retrofit is shown to have significant financial and health benefits.

  6. The origin of the energy-momentum conservation law

    Science.gov (United States)

    Chubykalo, Andrew E.; Espinoza, Augusto; Kosyakov, B. P.

    2017-09-01

    The interplay between the action-reaction principle and the energy-momentum conservation law is revealed by the examples of the Maxwell-Lorentz and Yang-Mills-Wong theories, and general relativity. These two statements are shown to be equivalent in the sense that both hold or fail together. Their mutual agreement is demonstrated most clearly in the self-interaction problem by taking account of the rearrangement of degrees of freedom appearing in the action of the Maxwell-Lorentz and Yang-Mills-Wong theories. The failure of energy-momentum conservation in general relativity is attributed to the fact that this theory allows solutions having nontrivial topologies. The total energy and momentum of a system with nontrivial topological content prove to be ambiguous, coordinatization-dependent quantities. For example, the energy of a Schwarzschild black hole may take any positive value greater than, or equal to, the mass of the body whose collapse is responsible for forming this black hole. We draw the analogy to the paradoxial Banach-Tarski theorem; the measure becomes a poorly defined concept if initial three-dimensional bounded sets are rearranged in topologically nontrivial ways through the action of free non-Abelian isometry groups.

  7. Energy conservation, how is it possible. A social-psychological research of the promotion of energy conservation by influencing the behavior of households

    Energy Technology Data Exchange (ETDEWEB)

    Midden, C J.H.

    1980-11-01

    The Energy Study Centre, of the Dutch Energy Research Foundation and the Department of Social and Organisational Psychology, Leyden University have performed a researchproject on the effectiveness of behavior change-strategies to influence the energy use in households. An overview is presented of the different approaches to behavior change: information, the approach based on learning principles and the coercive-approach. A field experiment has been carried out in which the effects of four strategies were tested. These strategies were: 1. general information about how to conserve energy in the home, 2. weekly feedback with respect to the magnitude and financial consequences of the own energy-use, 3. weekly feedback with respect to the magnitude and financial consequences of the own energy-use compared with the use of people in comparable conditions (same houses), 4. weekly feedback (comparative) and financial incentives for reduction of energy-use. The results indicate that the individual feedback and financial incentives + feedback are effective in reducing energy-use, the comparative feedback is effective under certain conditions, the general information seems hardly effective. The results are also related to the attitudes of the residents towards energy conservation.

  8. Energy conservation, how is it possible. A social-psychological research of the promotion of energy conservation by influencing the behavior of households. Summary

    Energy Technology Data Exchange (ETDEWEB)

    Midden, C J.H.

    1981-03-01

    The Energy Study Centre of the Netherlands Energy Research Foundation ECN and the Department of Social and Organizational Psychology, Leyden University, have jointly undertaken a research project on the effectiveness of behavior change strategies to influence the energy use in family households. An overview is presented of the three different approaches to behavior change: information, the approach based on learning principles, and the coercive-approach. A field experiment has been carried out in which the effects of four strategies were tested. These strategies were: 1. general information about how to conserve energy in the home, 2. weekly feedback with respect to the magnitude and financial consequences of the own energy use, 3. weekly feedback with respect to the magnitude and financial consequenses of the own energy use compared with the use of people in comparable conditions (same houses), 4. weekly feedback (comparative) and financial incentives for reduction of energy use. The results indicate that the individual feedback and financial incentives and feedback are effective in reducing energy use, that the comparative feedback is effective under certain conditions and that the general information seems hardly effective. The results have also been related to the attitudes of the residents towards energy conservation.

  9. Selected bibliography: cost and energy savings of conservation and renewable energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    This bibliography is a compilation of reports on the cost and energy savings of conservation and renewable energy applications throughout the United States. It is part of an overall effort to inform utilities of technological developments in conservation and renewable energy technologies and so aid utilities in their planning process to determine the most effective and economic combination of capital investments to meet customer needs. Department of Energy assessments of the applications, current costs and cost goals for the various technologies included in this bibliography are presented. These assessments are based on analyses performed by or for the respective DOE Program Offices. The results are sensitive to a number of variables and assumptions; however, the estimates presented are considered representative. These assessments are presented, followed by some conclusions regarding the potential role of the conservation and renewable energy alternative. The approach used to classify the bibliographic citations and abstracts is outlined.

  10. Residential energy-efficient technology adoption, energy conservation, knowledge, and attitudes: An analysis of European countries

    International Nuclear Information System (INIS)

    Mills, Bradford; Schleich, Joachim

    2012-01-01

    Relationships between measures of household energy use behavior and household characteristics are estimated using a unique dataset of approximately 5000 households in 10 EU countries and Norway. Family age-composition patterns are found to have a distinct impact on household energy use behavior. Households with young children are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy savings for environmental reasons. By contrast, households with a high share of elderly members place more importance on financial savings, and have lower levels of technology adoption, energy conservation practice use, and knowledge about household energy use. Education levels also matter, with higher levels associated with energy-efficient technology adoption and energy conservation practice use. Similarly, university education increases the stated importance of energy savings for greenhouse gas reductions and decreases the stated importance for financial reasons. Education impacts also vary greatly across survey countries and there is some evidence of an Eastern–Western European divide with respect to attitudes towards energy savings. These cross-country differences highlight the need to balance a common EU energy-efficiency policy framework with flexibility for country specific policies to address unique constraints to energy-efficient technology and conservation practice adoption. - Highlights: ► Household energy use behavior is explored with data from 11 European countries. ► Household age structure and education influence household energy use behavior and attitudes. ► Significant country differences in household energy use behavior exist. ► The EU needs to balance a common energy-efficiency policy framework with country specific policies.

  11. Energy, momentum and angular momentum conservations in de Sitter gravity

    International Nuclear Information System (INIS)

    Lu, Jia-An

    2016-01-01

    In de Sitter (dS) gravity, where gravity is a gauge field introduced to realize the local dS invariance of the matter field, two kinds of conservation laws are derived. The first kind is a differential equation for a dS-covariant current, which unites the canonical energy-momentum (EM) and angular momentum (AM) tensors. The second kind presents a dS-invariant current which is conserved in the sense that its torsion-free divergence vanishes. The dS-invariant current unites the total (matter plus gravity) EM and AM currents. It is well known that the AM current contains an inherent part, called the spin current. Here it is shown that the EM tensor also contains an inherent part, which might be observed by its contribution to the deviation of the dust particle’s world line from a geodesic. All the results are compared to the ordinary Lorentz gravity. (paper)

  12. 77 FR 31756 - Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating...

    Science.gov (United States)

    2012-05-30

    ...-AC46 Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating... regulations authorizing the use of alternative methods of determining energy efficiency or energy consumption... alternative methods of determining energy efficiency or energy consumption of various consumer products and...

  13. Travelling energy systems: knowledge transfer for energy efficiency and conservation from European to Australian building projects

    Energy Technology Data Exchange (ETDEWEB)

    Glad, Wiktoria (Tema Technology and Social Change, Linkoeping Univ. (Sweden); Inst. for Sustainable Futures, Univ. of Technology, Sydney (Australia))

    2009-07-01

    Energy efficiency and conservation in the Australian built environment have not yet been implemented to any great extent. Despite favourable prerequisites, such as vast windswept unpopulated areas suitable for wind power and many hours of direct sunlight in most populated areas, electricity is mainly generated by burning brown coal and buildings are poorly equipped for hot summers and cool winters. Australia urgently needs to convert to alternative energy sources and implement energy efficiency measures, since its carbon dioxide emissions per capita are among the highest in the world. In a recent major redevelopment in Sydney, the Carlton and United Brewery (CUB) site knowledge of energy efficiency and conservation measures used in European buildings was transferred and implemented in local designs and infrastructure. This knowledge came mainly from urban planning and developments in London, but also from high-profile architectural firms based in Paris and Germany. The arrival of this knowledge in Australia led to phases when the knowledge was translated and enacted in local spaces and the constituent ideas were transformed into action. The present research is based on ten months of ethnographic fieldwork in which the planning and design of the CUB site was observed. The results of the study identify barriers to and opportunities for energy system knowledge transfer between different cultures and local spaces. Substantial time must be spent overcoming cultural barriers, so the involved parties can start talking the same language. This is not only true for stakeholders operating in different continents, but for stakeholders operating in different local arenas in the same country.

  14. Examination of commercial aviation operational energy conservation strategies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-10-01

    Forty-seven fuel conservation strategies are identified for commercial aviation and the fuel saving potential, costs, constraints, and current implementation levels of these options are examined. This assessment is based on a comprehensive review of published data and discussions with representatives from industry and government. Analyses were performed to quantify the fuel saving potential of each option, and to assess the fuel savings achieved to date by the airline industry. Those options requiring further government support for option implementation were identified, rated, and ranked in accordance with a rating methodology developed in the study. Finally, recommendations are made for future government efforts in the area of fuel conservation in commercial aviation.

  15. Alexandria electricity distribution company (AEDC) experience in energy conservation

    International Nuclear Information System (INIS)

    Youssef, K.; Soliman, O.; Nabil, A.

    2005-01-01

    Alexandria is the second capital of Egypt and represents forty percent of Egypt's industrial activities. There are about 350 big industrial firms and more than 2 thousands small and medium enterprises. This industries produces significant greenhouse gas emission. Good efforts are exerted in the field of energy saving and environment conservation by AEDC in order to reduce and limit greenhouse gas emission. AEDC participated in many projects sponsored by different foreign counterparts. These projects are: 1 - Energy and urban environment in Mediterranean countries: Phases 1, 2(1995-1996). 2 - Demand side management (DSM) 1996 - 1997. 3 - Energy and urban environment in Mediterranean countries: Phases 3 (2002-2003). 4 - Global environment facility ( GEF ) 1999 - 2003. The results of these pilot projects are presented in details in this paper

  16. Energy as form giver: conservation technologies in architecture's future

    Energy Technology Data Exchange (ETDEWEB)

    Vosbeck, R R

    1981-07-01

    The need to conserve energy has changed architecture, which now has distinct energy-conscious designs and a new design vocabulary. Future designs will consider how energy affects buildings and minimize the impact in siting and landscaping decisions. Existing buildings must also be accommodated. No building performance standards exist yet that allow architects to be creative, although architects are working more closely with engineers and builders. Earth-sheltering designs will have to overcome psychological barriers, but the opportunities to preserve open space and views will improve their acceptability. The American Institute of Archiects will assume leadership in this area, but it will not take over all the research programs abandoned by the Reagan administration. Future housing will be more compact, grouped, and closely integrated. (DCK)

  17. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    International Nuclear Information System (INIS)

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage

  18. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage. (DMC)

  19. ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

    1992-06-01

    Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

  20. High Resolution Mapping of Soils and Landforms for the Desert Renewable Energy Conservation Plan (DRECP)

    Science.gov (United States)

    Potter, Christopher S.; Li, Shuang

    2014-01-01

    The Desert Renewable Energy Conservation Plan (DRECP), a major component of California's renewable energy planning efforts, is intended to provide effective protection and conservation of desert ecosystems, while allowing for the sensible development of renewable energy projects. This NASA mapping report was developed to support the DRECP and the Bureau of Land Management (BLM). We outline in this document remote sensing image processing methods to deliver new maps of biological soils crusts, sand dune movements, desert pavements, and sub-surface water sources across the DRECP area. We focused data processing first on the largely unmapped areas most likely to be used for energy developments, such as those within Renewable Energy Study Areas (RESA) and Solar Energy Zones (SEZs). We used imagery (multispectral and radar) mainly from the years 2009-2011.

  1. Sexual predators, energy development, and conservation in greater Yellowstone.

    Science.gov (United States)

    Berger, Joel; Beckmann, Jon P

    2010-06-01

    In the United States, as elsewhere, a growing debate pits national energy policy and homeland security against biological conservation. In rural communities the extraction of fossil fuels is often encouraged because of the employment opportunities it offers, although the concomitant itinerant workforce is often associated with increased wildlife poaching. We explored possible positive and negative factors associated with energy extraction in the Greater Yellowstone Ecosystem (GYE), an area known for its national parks, intact biological diversity, and some of the New World's longest terrestrial migrations. Specifically, we asked whether counties with different economies-recreation (ski), agrarian (ranching or farming), and energy extractive (petroleum)-differed in healthcare (gauged by the abundance of hospital beds) and in the frequency of sexual predators. The absolute and relative frequency of registered sex offenders grew approximately two to three times faster in areas reliant on energy extraction. Healthcare among counties did not differ. The strong conflation of community dishevel, as reflected by in-migrant sexual predators, and ecological decay in Greater Yellowstone is consistent with patterns seen in similar systems from Ecuador to northern Canada, where social and environmental disarray exist around energy boomtowns. In our case, that groups (albeit with different aims) mobilized campaigns to help maintain the quality of rural livelihoods by protecting open space is a positive sign that conservation can matter, especially in the face of rampant and poorly executed energy extraction projects. Our findings further suggest that the public and industry need stronger regulatory action to instill greater vigilance when and where social factors and land conversion impact biological systems.

  2. Performance of passive solar and energy conserving houses in California

    Science.gov (United States)

    Mahajan, S.; Newcomb, C.; Shea, M.; Mort, D.

    1983-11-01

    This report provides a technical description of the methodology and the results of a two year effort to collect field data on the performance of passive solar and energy conserving houses in California. Sixty-three passive solar houses were visited and several hours were spent with the homeowner obtaining building details, management procedures, architectural plans, photographs, and at least a year of billing data. With this information thermal performance parameters were calculated for each of the houses. Eleven of the above sixty-three Class C sites (nine passive solar and two energy conserving houses) were instrumented and monitored using the SERI Class B methodology as a guideline. Continuous data were collected for one year using up to 18 different sensors to measure temperatures, electric power, insolation, and the status of fans, gas burners, and moveable insulation. In addition careful one time measurements were made to determine the loss coefficient, infiltration rate, and furnace efficiency. Analysis of this data giving comfort conditions maintained and energy uses for a complete heating and cooling season for each of the houses is presented.

  3. Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)

    Science.gov (United States)

    The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and U.S. conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies.

  4. Retrofit energy conservation in residential buildings in southern California

    Science.gov (United States)

    Turner, R. H.; Birur, G. C.; Daksla, C.

    1982-01-01

    The common energy conservation techniques (ECTs) that can be retrofit-installed into residential buildings are surveyed. The quantity of saved energy for heating and cooling attributable to each ECT is evaluated for three common modes of heating: natural gas heating at 60/therm; heating via heat pump at $1.20/therm; and electric resistance heating at $2.40/therm. In every case, a life cycle cost comparison is made between the long term revenue due to energy conservation and a safe and conventional alternative investment that might be available to the prudent homeowner. The comparison between investment in an ECT and the alternative investment is brought into perspective using the life cycle payback period and an economic Figure of Merit (FOM). The FOM allows for relative ranking between candidate ECTs. Because the entire spectrum of winter heating climates in California is surveyed, the decision maker can determine whether or not a considered ECT is recommended in a given climate, and under what conditions an ECT investment becomes attractive.

  5. 75 FR 52892 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters...

    Science.gov (United States)

    2010-08-30

    ... ``Energy Conservation Program for Consumer Products Other Than Automobiles,'' including residential water... final rule revising energy conservation standards for residential water heaters, direct heating.... EERE-2009-BT-TP-0013] RIN 1904-AB95 Energy Conservation Program for Consumer Products: Test Procedures...

  6. 78 FR 50026 - Energy Efficiency and Conservation Loan Program Finding of No Significant Impact

    Science.gov (United States)

    2013-08-16

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Energy Efficiency and Conservation Loan Program... implementing its new Energy Efficiency and Conservation Loan Program. The FONSI decision document is based on... entitled ``Energy Efficiency and Conservation Loan Program,'' which expands upon policies and procedures...

  7. 40 CFR 73.80 - Operation of allowance reserve program for conservation and renewable energy.

    Science.gov (United States)

    2010-07-01

    ... for conservation and renewable energy. 73.80 Section 73.80 Protection of Environment ENVIRONMENTAL... and Renewable Energy Reserve § 73.80 Operation of allowance reserve program for conservation and renewable energy. (a) General. The Administrator will allocate allowances from the Conservation and...

  8. Energy conserving, linear scaling Born-Oppenheimer molecular dynamics.

    Science.gov (United States)

    Cawkwell, M J; Niklasson, Anders M N

    2012-10-07

    Born-Oppenheimer molecular dynamics simulations with long-term conservation of the total energy and a computational cost that scales linearly with system size have been obtained simultaneously. Linear scaling with a low pre-factor is achieved using density matrix purification with sparse matrix algebra and a numerical threshold on matrix elements. The extended Lagrangian Born-Oppenheimer molecular dynamics formalism [A. M. N. Niklasson, Phys. Rev. Lett. 100, 123004 (2008)] yields microcanonical trajectories with the approximate forces obtained from the linear scaling method that exhibit no systematic drift over hundreds of picoseconds and which are indistinguishable from trajectories computed using exact forces.

  9. Correlation-induced spectral changes and energy conservation

    International Nuclear Information System (INIS)

    Agarwal, G.S.; Wolf, E.

    1996-01-01

    An energy conservation law is derived for fields generated by random, statistically stationary, scalar sources of any state of coherence. It is shown that correlation-induced spectral changes are in strict agreement with this law and that, basic to the understanding of such changes, is a distinction that must be made between the spectrum of a source and the spectrum of the field that the source generates. This distinction, which is obviously relevant for spectroscopy, does not appear to have been previously recognized. copyright 1996 The American Physical Society

  10. Environmental Development Plan for Transportation Energy Conservation. FY 79 update

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M. K.; Bernard, III, M. J.

    1978-12-15

    This is the first annual update of the Environment Development Plan (EDP) for the DOE Division of Transportation Energy Conservation program. It identifies the ecosystem, resource, physical environment, health, safety, and socioeconomic concerns associated with the division's transportation programs. These programs include the research, development, demonstration and assessment (RDD and A) of seventeen transportation technologies and several strategy and policy development and implementation projects. The transportation technologies projects deal with highway transport including electric vehicles, marine transport and pipeline transport. This EDP presents a research and assessment plan for resolving any potentially adverse environmental concerns stemming from these programs.

  11. Department of Energy programs and objectives: energy conservation in agricultural production

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    This document describes the current Department of Energy agriculture research program as it relates to the research recommendations submitted by a 1976 workshop on energy conservation in agricultural production. In-depth discussions on fertilizers, irrigation, crop drying, fuel substitution, crop and animal production systems, greenhouses, materials handling, and transport systems are included. (MCW)

  12. 78 FR 16443 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Science.gov (United States)

    2013-03-15

    ... Standards for Ceiling Fans and Ceiling Fan Light Kits AGENCY: Office of Energy Efficiency and Renewable... consider amending the energy conservation standards for ceiling fans and ceiling fan light kits. DOE also....gov . Follow the instructions for submitting comments. Email: CeilingFan[email protected

  13. Macro-economic effects of additional energy conservation in the European Community

    International Nuclear Information System (INIS)

    Sips, H.W.; Bakker, L.; Muizelaar, J.; Velthuijsen, J.W.

    1991-01-01

    The aim of the title study is to evaluate the environmental and economic consequences of additional energy conservation in five Western European countries: the Netherlands, the Federal Republic of Germany, the United Kingdom, France and Italy. In the first part of the study the economic effects of a policy, in which additional energy conservation is realized only for the Netherlands, is calculated. In this report the results are presented. The calculated results of the economic effects of a coordinated energy conservation policy in the abovementioned countries will be published in a separate report. The effects of three policy variants will be evaluated: the non-financial policy variant, the shift of the financial burden variant, and the variant in which the levies are not compensated.The starting point for the first variant is an autonomous realization of the energy conservation. The basis of the second variant is that an equal amount of energy can be saved by means of a substantial energy levy. The profits of this levy can be used to reduce the financial burden of labour. For the economic calculations use has been made of the HERMES-model. Every member of the European Community has developed such a macro-economic model. In chapter two the different starting points for the calculations are outlined, with special attention to descriptions of the policy variants, the model-input and the basic projection. In chapter three the economic effects of the policy variants are presented and discussed. In chapter four the energy conservation and the environmental effects of the variants are dealt with. The most important conclusion of this study is that a considerable amount of energy can be saved, which will have positive effects on the economy and the environment. 8 figs., 20 tabs., 6 apps., 32 refs

  14. Conflicts in Everyday Life: The Influence of Competing Goals on Domestic Energy Conservation

    Directory of Open Access Journals (Sweden)

    Anneli Selvefors

    2015-05-01

    Full Text Available A common approach for understanding people’s domestic energy behavior is to study the influence of deterministic factors, such as attitudes, norms and knowledge, on behavior. However, few studies have succeeded in fully explaining people’s behavior based on these factors alone. To further the understanding of people’s everyday energy use, a goal-oriented approach based on activity theory has been applied to discuss energy conservation from a multiple goal perspective based on the findings from an interview study with 42 informants. The findings show that the informants used energy to fulfill goals linked to basic needs or desires related to their well-being. Even though the majority of informants had an explicit goal to reduce their energy consumption, many experienced conflicts with other competing goals, which often made energy conservation undesirable or challenging. The findings suggest that actions to reduce energy use will most often not be prioritized if they cannot be integrated into people’s daily life without jeopardizing their possibilities to achieve their primary goals and satisfy their everyday needs. It is thus vital to consider people’s everyday life and the many conflicts they experience when aiming to understand why people do, or do not, prioritize energy conservation during everyday activities.

  15. Potential social, institutional, and environmental impacts of selected energy-conservation measures in two Washington communities. [Seattle and Yakima

    Energy Technology Data Exchange (ETDEWEB)

    Edelson, E.; Olsen, M.

    1980-03-01

    The likely environmental, social, and institutional impacts of selected energy-conservation measures in two communities in Washington state are reported. The five conservation measures investigated in this study were: (1) retrofitting existing buildings; (2) district heating and Integrated Community Energy Systems (ICES); (3) small automobiles and vehicle redesign; (4) land-use and housing modifications; and (5) electric-utility rate reform. Twenty potential impact areas were selected for analysis. These areas were divided into five categories of environmental impacts, economic impacts, community impacts, personal impacts, and overall quality of life in the community. The research was conducted in Seattle and Yakima, Washington. In each location, about two dozen public officials and business, labor, and community leaders were interviewed. Their diverse views are summarized. The Seattle respondents saw energy conservation as a highly desirable policy with a number of temporary, transitional problems arising as energy-conservation measures were implemented. Yakima respondents, in contrast, did not expect to encounter many serious energy problems in the foreseeable future and consequently viewed energy conservation as a relatively minor community concern. Moreover, they anticipated that many conservation measures, if implemented by the government, would encounter either apathy or resistance in their community. Two broad generalizations can bedrawn from these interviews: (1) energy conservation will basically be beneficial for the natural environment and our society; and (2) if energy conservation does become a dominant thrust in our society, it could stimulate and reinforce a much broader process of fundamental social change. (LCL)

  16. Quasilocal energy and conserved charges derived from the gravitational action

    International Nuclear Information System (INIS)

    Brown, J.D.; York, J.W. Jr.

    1993-01-01

    The quasilocal energy of gravitational and matter fields in a spatially bounded region is obtained by employing a Hamilton-Jacobi analysis of the action functional. First, a surface stress-energy-momentum tensor is defined by the functional derivative of the action with respect to the three-metric on 3 B, the history of the system's boundary. Energy surface density, momentum surface density, and spatial stress are defined by projecting the surface stress tensor normally and tangentially to a family of spacelike two-surfaces that foliate 3 B. The integral of the energy surface density over such a two-surface B is the quasilocal energy associated with a spacelike three-surface Σ whose orthogonal intersection with 3 B is the boundary B. The resulting expression for quasilocal energy is given in terms of the total mean curvature of the spatial boundary B as a surface embedded in Σ. The quasilocal energy is also the value of the Hamiltonian that generates unit magnitude proper-time translations on 3 B in the timelike direction orthogonal to B. Conserved charges such as angular momentum are defined using the surface stress tensor and Killing vector fields on 3 B. For spacetimes that are asymptotically flat in spacelike directions, the quasilocal energy and angular momentum defined here agree with the results of Arnowitt, Deser, and Misner in the limit that the boundary tends to spatial infinity. For spherically symmetric spacetimes, it is shown that the quasilocal energy has the correct Newtonian limit, and includes a negative contribution due to gravitational binding

  17. Consumer behavior and energy conservation. Final report of the LINKKI research program; Kuluttajien kaeyttaeytyminen ja energiansaeaestoe. LINKKI- tutkimusohjelman loppuraportti

    Energy Technology Data Exchange (ETDEWEB)

    Arvola, A.; Kasanen, P. [Helsinki Univ. (Finland). Dept. of Social Psychology

    1996-10-01

    The goal of LINKKI - the research program on consumer behavior and energy conservation - was to promote energy conservation by seeking potential and means for energy conservation in the short term in areas that are linked with consumers` activities and choices. Research has been conducted in the following sectors: home, buildings, traffic, and indirect energy consumption. This report discusses the results obtained through the program against a more general background of people`s ways of life and the various factors explaining energy consumption. The report assesses the differences discovered between households, for instance, with respect to demographic factors, life situations, motivation towards conservation, information needs, and attitudes to information. These factors were evaluated in their role as barriers to energy conservation. The research projects have surveyed various ways of disseminating information (e.g. advice, feedback on consumption, computer programs, energy labels), as well as information needs and decision-making processes existing among households. Research conducted in the sector of indirect energy consumption has produced data on conservation potential with respect to the selection of foods and the organization of leisure activities. In the sector of energy consumption in traffic, assessments have been made concerning the conservation potential that can be achieved by reorganizing activities and data transmission (e.g. distance work, flexible working time). The prerequisites for the actualization of this potential have also been studied. Similarly, the opportunities of reducing energy consumption in traffic by means of prices, taxation systems and regional ticket systems have been analyzed

  18. A study on the evaluation of ventilation system suitable for outside air cooling applied in large data center for energy conservation

    International Nuclear Information System (INIS)

    Kwon, Yong Il

    2016-01-01

    In developed countries, expansion of communication technology has resulted in continual increase in the construction of data centers with high-density cooling loads. Throughout a year, IT equipment installed in a data center generates large and constant cooling load. As a result, data centers may be consuming an ever-growing amount of energy. The cooling system utilizing the energy of outside air is applied universally to reduce data center energy consumption. The application of the cooling system to the outdoor air cooling system of a data center considers that temperature efficiency and ventilation performance vary depending on the type of ventilation system. The displacement and mixed ventilation method can be applied generally to a data center. The efficiency of a ventilation system depends on inside temperature or contaminant concentrations in room and outlets. This study thus aims to evaluate the ventilation performance that varies according to type of ventilation system installed in the data center. Ventilation efficiency is assessed by applying the concept of total air age and considers the fresh air ratio and age of return air. Further, temperature efficiency gained by utilizing temperature difference is used to assess causes for changes in ventilation performance.

  19. A study on the evaluation of ventilation system suitable for outside air cooling applied in large data center for energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Yong Il [Shinhan University, Euijungbu (Korea, Republic of)

    2016-05-15

    In developed countries, expansion of communication technology has resulted in continual increase in the construction of data centers with high-density cooling loads. Throughout a year, IT equipment installed in a data center generates large and constant cooling load. As a result, data centers may be consuming an ever-growing amount of energy. The cooling system utilizing the energy of outside air is applied universally to reduce data center energy consumption. The application of the cooling system to the outdoor air cooling system of a data center considers that temperature efficiency and ventilation performance vary depending on the type of ventilation system. The displacement and mixed ventilation method can be applied generally to a data center. The efficiency of a ventilation system depends on inside temperature or contaminant concentrations in room and outlets. This study thus aims to evaluate the ventilation performance that varies according to type of ventilation system installed in the data center. Ventilation efficiency is assessed by applying the concept of total air age and considers the fresh air ratio and age of return air. Further, temperature efficiency gained by utilizing temperature difference is used to assess causes for changes in ventilation performance.

  20. Report of year 2000 version on basic study for promotion of joint implementation. Energy conservation by renovation of reheating furnace at 'SIDEX' S.A. Galati Steel Plant, Romania

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The purpose of this project is to perform a feasibility study on energy conservation by renovation of reheating furnace at 'SIDEX' S.A. Galati Steel Plant, and discuss the possibility of the future joint implementation project. This project is intended to contribute to reduction in greenhouse effect gas emission in Romania through energy conservation in industries, and introduction of the Japanese energy saving technologies. Furthermore, this project would be capable of contributing to modernization of the industries to achieve sustainable economic growth in Romania, where the joint implementation will be performed in the future. The fuel consumption per ton in the conventionally used reheating furnaces is actually about three times as much as in the same furnaces in Japan. Speaking of electric power consumption, it is about four times as much. The renovation will result in reduction of fuel consumption to the same level as in steel mills in Japan. This will reduce the import of natural gas by 59 million Nm{sup 3} annually after the project will have been implemented, and reduction is expected in CO2 of about 170,000 tons (on the basis of conversion to petroleum). The second effect is reduction of oxidation scale on surfaces of steel products generated in the furnaces at 3% or more presently to about 1%, which corresponds to steel products of more than 20,000 tons. (NEDO)

  1. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    International Nuclear Information System (INIS)

    Al-Ajlan, S.A.; Al-Ibrahim, A.M.; Abdulkhaleq, M.; Alghamdi, F.

    2006-01-01

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  2. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajlan, S.A. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia)]. E-mail: salajlan@kacst.edu.sa; Al-Ibrahim, A.M. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia); Abdulkhaleq, M. [Ministry of Water and Electricity (Saudi Arabia); Alghamdi, F. [Ministry of Water and Electricity (Saudi Arabia)

    2006-09-15

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  3. Energy conservation in the industry. Innovators talking; Energiebesparing in de industrie. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on energy conservation in the industry [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar energiebesparing in de industrie.

  4. Energy conservation in the industry. Innovators talking; Energiebesparing in de industrie. Innovators aan het woord

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Qualitative studies have been conducted of the results of completed projects focused on energy innovation, spread over the seven themes of the top sector Energy: Energy saving in industry, Energy conservation in the built environment, Gas, Bio-energy, Smart grids, Offshore Wind, Solar PV. This provides insight into the follow-up activities and lessons of some EOS (Energy Research Subsidy) completed projects with the aim to inspire, connect and strengthen the TKIs (Topconsortia for Knowledge and Innovation) and individual companies and researchers working on energy innovation. This report concerns the research on energy conservation in the industry [Dutch] Er is een kwalitatief onderzoek uitgevoerd naar de resultaten van afgeronde projecten gericht op energie-innovatie, verdeeld over de zeven thema's van de topsector Energie: Energiebesparing in de industrie; Energiebesparing in de gebouwde omgeving; Gas; Bio-energie; Smart grids; Wind op zee; Zon-pv. Daarmee wordt inzicht gegeven in de vervolgactiviteiten en lessen van een aantal afgesloten EOS-projecten (Energie Onderzoek Subsidie) met het oog op het inspireren, verbinden en versterken van de TKI's (Topconsortia voor Kennis en Innovatie) en individuele bedrijven en onderzoekers die werken aan energie-innovatie. Dit rapport betreft het onderzoek naar energiebesparing in de industrie.

  5. Stable schemes for dissipative particle dynamics with conserved energy

    Energy Technology Data Exchange (ETDEWEB)

    Stoltz, Gabriel, E-mail: stoltz@cermics.enpc.fr

    2017-07-01

    This article presents a new numerical scheme for the discretization of dissipative particle dynamics with conserved energy. The key idea is to reduce elementary pairwise stochastic dynamics (either fluctuation/dissipation or thermal conduction) to effective single-variable dynamics, and to approximate the solution of these dynamics with one step of a Metropolis–Hastings algorithm. This ensures by construction that no negative internal energies are encountered during the simulation, and hence allows to increase the admissible timesteps to integrate the dynamics, even for systems with small heat capacities. Stability is only limited by the Hamiltonian part of the dynamics, which suggests resorting to multiple timestep strategies where the stochastic part is integrated less frequently than the Hamiltonian one.

  6. Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

    Science.gov (United States)

    Zheng, Chaocheng

    2017-10-01

    With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

  7. Conserving energy through new irrigation technologies. Technical briefing report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    The benefits and applications of five irrigation technologies are explored: mobile drop-tube irrigation, computerized scheduling, reduced-pressure center pivots, well design and development, and automated gated-pipe systems. Perhaps the most promising of the new irrigation technologies is the low-energy, precision-application (LEPA) system. This mobile system used one-half the energy of conventional sprinkler systems and distributes water with greater efficiency through a series of low-pressure drop tubes suspended above the crop. Computerized methods of irrigation scheduling have been developed to help farmers conserve water and energy. Special computer programs determine when a crop needs water and how much to apply for optimal plant growth, thus preventing the unnecessary costs of pumping more water than the crop needs. Field test results show that replacing traditional scheduling methods of irrigation with computerized scheduling can reduce energy and water use by as much as 35%. The irrigation industry is actively promoting reduced-pressure water application methods, particularly for center-pivot systems. Reduced-pressure systems expend less energy but produce the same crop yields as conventional high-pressure systems, as long as excessive water runoff does not occur. If well design and development techniques are applied when a well is drilled into an unconsolidated acquifer, the well's life expectancy, as well as its operating efficiency, can increase, the later by as much as 40%.

  8. Residential Energy Use and Conservation. Economics, Demographics, and Standards

    Energy Technology Data Exchange (ETDEWEB)

    Brounen, D. [Department of Financial Management, Erasmus University Rotterdam, Rotterdam (Netherlands); Kok, N. [Limburg Institute of Financial Economics LIFE, Maastricht University, Maastricht (Netherlands); Quigley, J.M. [Department of Economics, University of California, Berkeley, CA (United States)

    2011-03-15

    Energy consumption in the residential sector offers an important opportunity for conserving resources. However, much of the current debate regarding energy efficiency in the housing market focuses on the physical and technical determinants of energy consumption, neglecting the role of the economic behavior of resident households. In this paper, we analyze the extent to which the use of gas and electricity is determined by the technical specifications of the dwelling as compared to the demographic characteristics of the occupying household, using a unique set of microeconomic data for a sample of more than 300,000 Dutch homes. The results show that residential gas consumption is determined principally by structural dwelling characteristics, such as the vintage, building type and quality of the home, while electricity consumption varies more directly with household composition, in particular income and family composition. Combining these results with projections on future economic and demographic trends, we find that, absent price increases for residential energy, the aging of the population and their increasing wealth will mostly offset improvements in the energy efficiency of the building stock resulting from policy interventions and natural revitalization.

  9. Conservation of lily plants. Energy conservation by decreasing circulation; Bewaring van lelieplantgoed. Energiebesparing door vermindering van de circulatie

    Energy Technology Data Exchange (ETDEWEB)

    Wildschut, J.; Gude, H. Sector Bloembollen, Bomen en Fruit, Praktijkonderzoek Plant en Omgeving PPO, Lisse (Netherlands)); Braam, G.; Vasen, R.; Van Diepen, G. [DLV Plant, Wageningen (Netherlands)

    2010-03-15

    By far the most important energy consuming aspect in cultivating lilies is the use of electricity for refrigeration and circulation during storage in the period November until April. The aim of this study is to arrive at standards for refrigeration and ventilation that result in maximum energy conservation without affecting the quality of the lily plants. As for reduced circulation, a comparison has also been made of the on/off control and the frequency control [Dutch] De veruit belangrijkste energiepost bij de teelt van lelies is het verbruik van elektriciteit voor koeling en circulatie tijdens de bewaring van november t/m april. Doel van dit onderzoek is om voor circulatie en ventilatie tot normen te komen waarmee maximaal op energie wordt bespaard zonder dat dit ten koste gaat van de kwaliteit van het lelieplantgoed. Voor de verminderde circulatie is hierbij ook een vergelijking gemaakt tussen de aan/uit regeling en de frequentieregeling.

  10. Real world financing opportunities for energy conservation projects

    Energy Technology Data Exchange (ETDEWEB)

    Tramonte, D.J.

    1988-01-01

    Do you have the resources, dollars, people expertise and general know-how to do all the energy conservation measures. If you have the funds, do it yourself. Historically you would save more if you hired a private concern because that is the only job the contractor does for you. You have other hats to wear and fires to put out. Using third-party financing can be a good decision based on your specific needs. Procrastination is not the answer - the cost of delay is extensive. Financing energy conservation measures is no different from financing your automobile or home. If the benefits outweigh the negatives, the answer is obvious. Remember, in any case of using private sector financing, your are joining a partnership arrangement. The only way to succeed is to be honest with each other on the front end. There need not be any surprises. Any reputable company will gladly have your attorney evaluate all agreements, amortization schedules, and attachments. Real world financing alternatives will continue to change as the market matures. It's not too good to be true. It is no more than a vehicle to make the efforts of capital improvements streamlined. The money or financing is the catalyst to the project and makes the other areas meld.

  11. Energy-Integrating Master Plan for the City of Atlantic City, New Jersey: energy conservation element. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-01

    The Master Plan describes a coordinated energy-conservation effort for the City, the effective application and ultimate success of which depend primarily on the active involvement of the City government and its functional departments. Following an introductory section, Section XXI, Community Energy Determinants, describes the natural and man-made environment, growth and energy profiles, and the institutional environment. Additional sections are entitled: Energy-Conservation Options (passive energy options and active energy-conservation options); Energy Integration; Community Energy Management; Energy-Conservation Implementation Plan; and an appendix containing an energy-related glossary, a directory to various sources of information on energy conservation, various technical documents, a copy of the National Energy Act, and a bibliography. (MCW)

  12. Training program for energy conservation in new-building construction. Volume IV. Energy conservation technology: advanced course for plan examiners

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This manual contains a more in-depth training in the review techniques and concepts required by the plan examiners and code officials in administering the code for conventional (buildings of 3 stories or less) construction.

  13. 78 FR 12969 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-26

    ... requested comment on (1) the penetration of ETS programs and the impacts of such programs on consumers and... grid interactive water heaters and that doing so would impede the development of the market for HPWHs..., Dairyland cited a 2005 study \\11\\ of more than 200 demand response programs which found that dynamic pricing...

  14. Energy conservation in the earth's crust and climate change.

    Science.gov (United States)

    Mu, Yao; Mu, Xinzhi

    2013-02-01

    Among various matters which make up the earth's crust, the thermal conductivity of coal, oil, and oil-gas, which are formed over a long period of geological time, is extremely low. This is significant to prevent transferring the internal heat of the earth to the thermal insulation of the surface, cooling the surface of the earth, stimulating biological evolution, and maintaining natural ecological balance as well. Fossil energy is thermal insulating layer in the earth's crust. Just like the function of the thermal isolation of subcutaneous fatty tissue under the dermis of human skin, it keeps the internal heat within the organism so it won't be transferred to the skin's surface and be lost maintaining body temperature at low temperatures. Coal, oil, oil-gas, and fat belong to the same hydrocarbons, and the functions of their thermal insulation are exactly the same. That is to say, coal, oil, and oil-gas are just like the earth's "subcutaneous fatty tissue" and objectively formed the insulation protection on earth's surface. This paper argues that the human large-scale extraction of fossil energy leads to damage of the earth's crust heat-resistant sealing, increasing terrestrial heat flow, or the heat flow as it is called, transferring the internal heat of the earth to Earth's surface excessively, and causing geotemperature and sea temperature to rise, thus giving rise to global warming. The reason for climate warming is not due to the expansion of greenhouse gases but to the wide exploitation of fossil energy, which destroyed the heat insulation of the earth's crust, making more heat from the interior of the earth be released to the atmosphere. Based on the energy conservation principle, the measurement of the increase of the average global temperature that was caused by the increase of terrestrial heat flow since the Industrial Revolution is consistent with practical data. This paper illustrates "pathogenesis" of climate change using medical knowledge. The

  15. Energy and angular-momentum non-conservation in four-dimensional gauge theories

    International Nuclear Information System (INIS)

    Manohar, A.

    1985-01-01

    We study energy and angular-momentum non-conservation on four-dimensional chiral gauge theories using Landau levels. These effects are physical manifestations of the usual gauge anomaly, and enable us to understand in a semi-classical approximation why anomaly cancellation is required for a consistent field theory. (orig.)

  16. 76 FR 37678 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Science.gov (United States)

    2011-06-28

    ... Laboratory study, which determined the energy use based on conservative estimates on number of fume hood... issue a Family Policymaking Assessment for any rule that may affect family well-being. This proposed determination would not have any impact on the autonomy or integrity of the family as an institution...

  17. Interactions of Delta Shock Waves for Zero-Pressure Gas Dynamics with Energy Conservation Law

    OpenAIRE

    Wei Cai; Yanyan Zhang

    2016-01-01

    We study the interactions of delta shock waves and vacuum states for the system of conservation laws of mass, momentum, and energy in zero-pressure gas dynamics. The Riemann problems with initial data of three piecewise constant states are solved case by case, and four different configurations of Riemann solutions are constructed. Furthermore, the numerical simulations completely coinciding with theoretical analysis are shown.

  18. Marketing energy conservation options to Northwest manufactured home buyers. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, P.L.; Mohler, B.L.; Taylor, Z.T.; Lee, A.D.; Onisko, S.A.

    1985-10-01

    Manufactured, or HUD-Code, homes comprise a growing share of the housing stock in the Northwest, as well as nationally. Their relatively low cost has made them especially attractive to lower income families, first-time home-buyers, and retired persons. The characteristics of manufactured home (MH) buyers, the unique energy consumption characteristics of the homes, and their increasing market share make this market an especially critical one for energy consumption and conservation planning in the Northwest. This study relies on extensive, existing survey data and new analyses to develop information that can potentially assist the design of a marketing plan to achieve energy conservation in new manufactured homes. This study has the objective of assisting BPA in the development of a regional approach in which numerous organizations and parties would participate to achieve conservation in new manufactured homes. A previous survey and information collected for this study from regional dealers and manufacturers provide an indication of the energy conservation options being sold to manufactured home buyers in the PNW. Manufacturers in the Northwest appear to sell homes that usually exceed the HUD thermal requirements. Manufacturers typically offer efficiency improvements in packages that include fixed improvements in insulation levels, glazing, and infiltration control. Wholesale costs of these packages range from about $100 to $1500. Typical packages include significant upgrades in floor insulation values with modest upgrades in ceilings and walls. This study identifies trends and impacts that a marketing plan should consider to adequately address the financial concerns of manufactured home buyers.

  19. Federal energy conservation programs pursuant to section 381 of the Energy Policy and Conservation Act (Public Law 94-163). Annual report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-21

    This report provides an overview of the activities and achievements of the executive branch of the Federal Government in implementing the energy conservation requirements and provisions of section 381 of the Energy Policy and Conservation Act (EPCA) of 1975 (Public Law 94-163). The report describes Federal actions to develop procurement policies that promote energy conservation and efficiency, develop a Federal 10-Year Buildings Energy Conservation Plan, develop responsible public education and information programs, encourage energy conservation and energy efficiency, and promote vanpooling and carpooling arrangements. About half of the Nation's energy is used in our homes and automobiles. Another 48 percent is used by State and local governments, business and insutry, in providing needed goods and services. The Federal Government is the Nation's largest energy user, accouting for 2.2 percent of the total national energy used in 1977. This energy is used by nearly 6 million people in more than 400 thousand buildings and in the operation of more than 600 thousand vehicles. While energy conservation and energy efficiency measures alone cannot solve our immediate problems, they are an essential part of our transition to an era of scarce and expensive energy supplies.

  20. Simplified energy design economics: Principles of economics applied to energy conservation and solar energy investments in buildings

    Science.gov (United States)

    Marshall, H. E.; Ruegg, R. T.; Wilson, F.

    1980-01-01

    Economic analysis techniques for evaluating alternative energy conservation investments in buildings are presented. Life cycle cost, benefit cost, savings to investment, payback, and rate of return analyses are explained and illustrated. The procedure for discounting is described for a heat pump investment. Formulas, tables of discount factors, and detailed instructions are provided to give all information required to make economic evaluations of energy conserving building designs.

  1. The valuation of environmental externalities in energy conservation planning

    International Nuclear Information System (INIS)

    Chernick, P.L.; Caverhill, E.J.

    1990-01-01

    The determination of the full societal costs of energy usage must incorporate estimates of the environmental effects, or externalities, of energy production and delivery. An externality is any cost or benefit that is not reflected in the price paid by a utility or its customers for energy produced or consumed. The potential variety and scope of externality analyses are discussed. Four methods of externality valuation are briefly discussed to highlight the uses, strengths and pitfalls of each method. The use of pollutants' relative potency, polling of experts, direct estimation of costs, and implied valuation, are compared. The authors preferred method of valuation for near-term energy supply decisions, implied valuation, is discussed in detail. The distinguishing feature of the implied valuation technique is its use of the cost of control, rather than the direct cost of emissions. Only the most expensive required control measure is relevant to valuation of the external effects. The difficulties in applying implied valuation, such as the definition of the margin, the multiple effects of pollutants and the imperfect nature of the regulatory system, are also considered. The effect of environmental externalities on the benefits of conservation are summarized

  2. Dynamic energy conservation model REDUCE. Extension with experience curves, energy efficiency indicators and user's guide

    International Nuclear Information System (INIS)

    Uyterlinde, M.A.; Rijkers, F.A.M.

    1999-12-01

    The main objective of the energy conservation model REDUCE (Reduction of Energy Demand by Utilization of Conservation of Energy) is the evaluation of the effectiveness of economical, financial, institutional, and regulatory measures for improving the rational use of energy in end-use sectors. This report presents the results of additional model development activities, partly based on the first experiences in a previous project. Energy efficiency indicators have been added as an extra tool for output analysis in REDUCE. The methodology is described and some examples are given. The model has been extended with a method for modelling the effects of technical development on production costs, by means of an experience curve. Finally, the report provides a 'users guide', by describing in more detail the input data specification as well as all menus and buttons. 19 refs

  3. 78 FR 43974 - Energy and Water Use Labeling for Consumer Products Under the Energy Policy and Conservation Act...

    Science.gov (United States)

    2013-07-23

    ... FEDERAL TRADE COMMISSION 16 CFR Part 305 [3084-AB15] Energy and Water Use Labeling for Consumer Products Under the Energy Policy and Conservation Act (Energy Labeling Rule) AGENCY: Federal Trade...'') in 1979,\\1\\ pursuant to the Energy Policy and Conservation Act of 1975 (EPCA).\\2\\ The Rule requires...

  4. Fiscal 1999 technical survey report. Cooperative project on energy conservation seminar; 1999 nendo sho energy seminar kyoryoku jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), from the viewpoint that the development and popularization of energy conservation technologies are extremely important as energy conservation measures, collected energy related primary information from 12 Asian countries including Japan for the development and popularization of energy conservation technologies, and has constructed a database NEDO/DB. NEDO is now propelling forward its efforts to popularize the database. For popularizing NEDO/DB in Vietnam and for rendering the people conscious of energy conservation, NEDO dispatched some lecturers to an energy conservation seminar sponsored by the Vietnamese Government. The importance of energy conservation promoting measures was highlighted at the seminar. NEDO's approach to AIJ (activities implemented jointly) and CDM (clean development mechanism) was described at the seminar, and a lecture meeting was held to explain NEDO/DB and to teach how to use the database. (NEDO)

  5. Models for residential- and commercial-sector energy-conservation analysis: applications, limitations, and future potential. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Henry E.; Fullen, Robert E.

    1980-09-01

    This report reviews four of the major models used by the Department of Energy (DOE) for energy conservation analyses in the residential- and commercial-building sectors. The objective is to provide a critical analysis of how these models can serve as tools for DOE and its Conservation Policy Office in evaluating and quantifying their policy and program requirements. For this, the study brings together information on the models' analytical structure and their strengths and limitations in policy applications these are then employed to assess the most-effective role for each model in addressing future issues of buildings energy-conservation policy and analysis. The four models covered are: Oak Ridge Residential Energy Model; Micro Analysis of Transfers to Households/Comprehensive Human Resources Data System (MATH/CHRDS) Model; Oak Ridge Commercial Energy Model; and Brookhaven Buildings Energy Conservation Optimization Model (BECOM).

  6. Energy conservation through the implementation of cogeneration and grid interconnection

    International Nuclear Information System (INIS)

    Dashash, M. A.

    2007-01-01

    With increasing awareness of energy conservation and environmental protection, the Arab World is moving to further improve energy conversion efficiency. The equivalent of over 2.7 MM bbl is being daily burnt to fuel the thermal power plants that represent 92% of the total Arab power generation. This adds up to close to one billion barrels annually. At a conservative 30$ per barrel, this represents a daily cost of over $81 Million. This paper will introduce two strategies with the ultimate objective to cut-off up to half of the current fuel consumption. Firstly, Cogeneration Technology is able to improve thermal efficiency from the current average of less than 25% to up to 80%. Just 1% improvement in power plant thermal efficiency represents 3 million $/day in fuel cost savings. In addition, a well-designed and operated cogeneration plant will: - Reduce unfriendly emissions by burning less fuel as a result of higher thermal efficiency, - Increase the decentralization of electrical generation, - Improve the reliability of electricity supply. As an example, the Kingdom of Saudi Arabia's experience of implementing cogeneration will be presented, in particular within its hydrocarbon facilities and desalination plants. This will include the existing facilities and the planned and on-going projects. Secondly, by interconnecting the power networks of all the adjacent Arab countries, the following benefits could be reached: - Reduce generation reserves and enhance the system reliability, - Improve the economic efficiency of the electricity power systems, - Provide power exchange and strengthen the supply reliability, - Adopt technological development and use the best modern technologies. At least two factors plead for this direction. On one hand, the four-hour time zone difference from Eastern to Western Arab World makes it easy to exchange power. On the other hand, this will help to reduce the reserve capacity and save on corresponding Capital investment, fuel, and O and M

  7. Handbook for the marketing of conservation and solar-energy programs

    Energy Technology Data Exchange (ETDEWEB)

    Mick, C K; Callahan, D

    1980-07-09

    A process-oriented approach is described for encouraging community level energy conservation and planning programs. The approach is designed to augment existing energy programs by focusing on the major barriers to changing current energy-related behavior and attitudes. A variety of concepts, tools and techniques which can be used to overcome these barriers are described. Suggestions are offered on how to design community energy campaign based on the concepts, tools and techniques described. Some brief case studies are provided as examples. (LEW)

  8. Teaching renewable energy using online PBL in investigating its effect on behaviour towards energy conservation among Malaysian students: ANOVA repeated measures approach

    Science.gov (United States)

    Nordin, Norfarah; Samsudin, Mohd Ali; Hadi Harun, Abdul

    2017-01-01

    This research aimed to investigate whether online problem based learning (PBL) approach to teach renewable energy topic improves students’ behaviour towards energy conservation. A renewable energy online problem based learning (REePBaL) instruction package was developed based on the theory of constructivism and adaptation of the online learning model. This study employed a single group quasi-experimental design to ascertain the changed in students’ behaviour towards energy conservation after underwent the intervention. The study involved 48 secondary school students in a Malaysian public school. ANOVA Repeated Measure technique was employed in order to compare scores of students’ behaviour towards energy conservation before and after the intervention. Based on the finding, students’ behaviour towards energy conservation improved after the intervention.

  9. Building Energy Efficiency in India: Compliance Evaluation of Energy Conservation Building Code

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Sha; Evans, Meredydd; Delgado, Alison

    2014-03-26

    India is experiencing unprecedented construction boom. The country doubled its floorspace between 2001 and 2005 and is expected to add 35 billion m2 of new buildings by 2050. Buildings account for 35% of total final energy consumption in India today, and building energy use is growing at 8% annually. Studies have shown that carbon policies will have little effect on reducing building energy demand. Chaturvedi et al. predicted that, if there is no specific sectoral policies to curb building energy use, final energy demand of the Indian building sector will grow over five times by the end of this century, driven by rapid income and population growth. The growing energy demand in buildings is accompanied by a transition from traditional biomass to commercial fuels, particularly an increase in electricity use. This also leads to a rapid increase in carbon emissions and aggravates power shortage in India. Growth in building energy use poses challenges to the Indian government. To curb energy consumption in buildings, the Indian government issued the Energy Conservation Building Code (ECBC) in 2007, which applies to commercial buildings with a connected load of 100 kW or 120kVA. It is predicted that the implementation of ECBC can help save 25-40% of energy, compared to reference buildings without energy-efficiency measures. However, the impact of ECBC depends on the effectiveness of its enforcement and compliance. Currently, the majority of buildings in India are not ECBC-compliant. The United Nations Development Programme projected that code compliance in India would reach 35% by 2015 and 64% by 2017. Whether the projected targets can be achieved depends on how the code enforcement system is designed and implemented. Although the development of ECBC lies in the hands of the national government – the Bureau of Energy Efficiency under the Ministry of Power, the adoption and implementation of ECBC largely relies on state and local governments. Six years after ECBC

  10. Energy Conservation Alternatives Study (ECAS): Conceptual Design and Implementation Assessment of a Utility Steam Plant with Conventional Furnace and Wet Lime Stack Gas Scrubbers

    Science.gov (United States)

    Brown, Dale H.

    1976-01-01

    A study was performed to estimate the technical/economic characteristics of a steam power plant (3500 pounds per square inch gauge, 1000 degrees Fahrenheit / 1000 degrees Fahrenheit) with a coal-burning radiant furnace and a wet lime stack gas scrubber to control sulfur emissions. Particulate emissions were controlled by an electrostatic precipitator operating at 300 degrees Fahrenheit. The stack gas from the scrubber was reheated from 125 degrees Fahrenheit to 250 degrees Fahrenheit as a base case, and from 125 degrees Fahrenheit to 175 degrees Fahrenheit as an alternate case. The study was performed on a basis consistent with the General Electric ECAS Phase II evaluation of advanced energy conversion systems for electric utility baseload applications using coal or coal-derived fuels. A conceptual design of the power plant was developed, including the on-site calcination of limestone to lime and the provision of sludge ponds to store the products of flue gas scrubbing. From this design, estimates were derived for power plant efficiency, capital cost, environmental intrusion characteristics, natural resource requirements, and cost of electricity at an assumed capacity factor of 65 percent. An implementation assessment was performed where factors affecting applicability of the conceptual design power plant in electric utility generation systems were appraised. At 250 degrees Fahrenheit and 175 degrees Fahrenheit stack gas temperatures respectively, the plants showed a cost of electricity of 39.8 and 37.0 mills per kilowatt-hours and overall plant efficiencies of 32 percent and 34 percent.

  11. Substantial energy conservation in air conditioners; Substantiele energiebesparing bij luchtbehandelingsinstallaties

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    An air conditioner has been retrofitted by application of an optimized fan in combination with an EC motor (brushless dc-motor). Attention is paid to the difference between an AC- and and EC motor, between free-running and spiral housing fans, between direct or indirect-driven, and between forward-bended and backward-bended blades. By means of equations and diagrams the realized energy conservation is visualized. [Dutch] De renovatie van een luchtbehandelingskast wordt besproken. Door de toepassing van ventilatoren met een geoptimaliseerde waaier in combinatie met een EC-motor (borstelloze gelijkstroommotor) wordt een substantiele energiebesparing gerealiseerd. Er wordt op verschillende aspecten ingegaan. Onder meer het verschil tussen een AC- en EC-motor, tussen vrijlopende en slakkenhuisventilatoren, tussen direct- of indirect-gedreven schoepen en tussen voorwaarts- of achterwaartsgebogen schoepen. Aan de hand van vergelijkingen en diagrammen wordt de energiewinst zichtbaar gemaakt.

  12. Environmental protection through energy conservation: A free lunch at last?

    International Nuclear Information System (INIS)

    Ruff, L.E.

    1990-01-01

    A cautious analysis of demand-side management programs is presented. Utility demand-side management (DSM) programs deserve to be given full and careful consideration as a potential way to give consumers better end-use energy services for their money, utilities an edge in an increasingly competitive market, and society a way to reduce the environmental costs of energy production. But in each of these areas, DSM programs offer no free lunches and have no inherent advantages over supply-side programs. If energy conservation makes sense on economic and business grounds, it can meet the standard economic and business tests applied to most of the rest of the economy; it neither requires nor deserves to be exempt from market concepts and disciplines. If utility DSM programs make sense on environmental grounds, they should be able to demonstrate their cost-effectiveness relative to other, primarily supply-side measures society is willing to undertake in order to control environmental effects. Subsidizing DSM measures in the hope that something good will happen far upstream can waste much money and cause disappointment and frustration

  13. Doing good but not that well? A dilemma for energy conserving homeowners

    International Nuclear Information System (INIS)

    Wahlström, Marie H.

    2016-01-01

    In this paper the issue of market capitalization of energy efficient buildings is addressed by considering single-family housing in Sweden and through analyzing as to what extent the market price for a house is influenced by its energy performance. Are Swedish homeowners doing well by doing good? We make use of information provided by the Swedish energy performance certificates for single-family homes matched with data on the corresponding transaction prices, household characteristics and attributes of the neighborhood. The resulting database, covering about 77,000 individual observations, is used to analyze the relationship between the price of a house and its energy performance by means of a hedonic model. Unlike most other studies the energy performance is decomposed into energy consumption and several other variables characterizing the energy system. The main question addressed is if there is a price premium for energy efficient housing in Sweden. Our results differ from earlier studies and indicate no price premium related to the energy consumption but substantial premiums for housing attributes that improve the energy efficiency. A likely explanation is that prospective buyers of new homes base their expectations about future energy consumption on those attributes rather than on the energy consumption of the previous owner. - Highlights: • Energy efficiency and market prices in single family housing in Sweden • The role played by energy-related attributes versus other building attributes • The influence on price of energy conservation potential

  14. Low Energy Technology. A Unit of Instruction on Energy Conservation in Field Crop Production.

    Science.gov (United States)

    Davis, George; Scanlon, Dennis C.

    This unit of instruction on energy conservation in field crop production was designed for use by agribusiness and natural resources teachers in Florida high schools and by agricultural extension agents as they work with adults and students. It is one of a series of 11 instructional units (see note) written to help teachers and agents to educate…

  15. Solar Energy: Energy Conservation and Passive Design Concepts: Student Material. First Edition.

    Science.gov (United States)

    Younger, Charles; Orsak, Charles G., Jr.

    Designed for student use in "Energy Conservation and Passive Design Concepts," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, bibliographies, and illustrations for seven course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

  16. Corporate Energy Conservation Program for Alcoa North American Extrusions

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-08-01

    This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

  17. Performance of two Vermont elementary school integrated energy conservation/solar energy retrofit projects

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, J.W. (Marlboro College, VT); Converse, A.O.

    1980-01-01

    Two Vermont elementary school energy conservation/passive solar energy retrofit projects are described. Both masonry buildings were insulated with polystyrene on the east, north and west exterior walls. The south walls of each building were converted to Trombe walls, and, in addition, a portion of the south wall of one building was fitted with a solar greenhouse. The construction details, the predicted performance, and some actual results are reported here.

  18. Sewerage force adjustment technology for energy conservation in vacuum sanitation systems

    Science.gov (United States)

    Guo, Zhonghua; Li, Xiaoning; Kagawa, Toshiharu

    2013-03-01

    The vacuum sanitation is the safe and sound disposal approach of human excreta under the specific environments like flights, high speed trains and submarines. However, the propulsive force of current systems is not adjustable and the energy consumption does not adapt to the real time sewerage requirement. Therefore, it is important to study the sewerage force adjustment to improve the energy efficiency. This paper proposes an energy conservation design in vacuum sanitation systems with pneumatic ejector circuits. The sewerage force is controlled by changing the systematic vacuum degree according to the amount of the excreta. In particular, the amount of the excreta is tested by liquid level sensor and mass sensor. According to the amount of the excreta, the relationship between the excreta amount and the sewerage force is studied to provide proper propulsive force. In the other aspect, to provide variable vacuum degrees for different sanitation requirements, the suction and discharge system is designed with pneumatic vacuum ejector. On the basis of the static flow-rate characteristics and the vacuum generation model, the pressure response in the ejector circuit is studied by using the static flow rate characteristics of the ejector and air status equation. The relationship is obtained between supplied compressed air and systematic vacuum degree. When the compressed air is supplied to the ejector continuously, the systematic vacuum degree increases until the vacuum degree reaches the extreme value. Therefore, the variable systematic vacuum degree is obtained by controlling the compressed air supply of the ejector. To verify the effect of energy conservation, experiments are carried out in the artificial excreta collection, and the variable vacuum-degree design saves more than 30% of the energy supply. The energy conservation is realized effectively in the new vacuum sanitation systems with good application prospect. The proposed technology provides technological

  19. Energy conservation: policy issues and end-use scenarios of savings potential. Part V. Energy efficient buildings: the causes of litigation against energy conservation building codes

    Energy Technology Data Exchange (ETDEWEB)

    Benenson, P.; Codina, R.; Cornwall, B.

    1978-09-01

    The guidelines laid out for the five subjects investigated in this series are to take a holistic view of energy conservation policies by describing the overall system in which they are implemented; provide analytical tools and sufficiently disagregated data bases that can be adapted to answer a variety of questions by the users; identify and discuss some of the important issues behind successful energy conservation policy; and develop an energy conservation policy in depth. Three specific cases reviewed are: the California nonresidential code (1976); the California residential code (1978); and the Farmers Home Administration code (1978). Although these three suits were brought by the building industry, this report also discusses considerations relevant to architects, bankers, and building inspectors. These cases are discussed from three perspectives: (1) objections to the codes explicitly stated in court, (2) industry conditions and practices behind objections stated in court, and (3) general beliefs not stated in court. This discussion focuses on suits intended to limit those building codes which the building industry sees as too strong. However, some energy conservation industries may sue to strengthen codes which they consider too weak. An example of such a case is Polarized Corporation's current suit against the Lighting section of ASHRAE 90-75 (Los Angeles Federal District Court, see Murnane, 1978). (MCW)

  20. Energy conservation education. Need for coordination; Enoek-undervisning. Behov for koordinering

    Energy Technology Data Exchange (ETDEWEB)

    Novakovic, V

    1994-05-01

    This paper discusses the energy conservation education at university level in Norway. The energy law of 29 june 1990 marks a turning point in the Norwegian energy policy; the market forces are introduced as the most important means of achieving an efficient socio-economic management of the energy resources. The importance of energy conservation is more fully appreciated. The Government can motivate energy conservation in many ways, above all by means of information and training. The position of coordinator for teaching energy conservation was created at NTH (Norwegian Institute of Technology) in 1989. Later a professorship in energy conservation has been established there. The area of activity of the professor is limited to stationary energy use in buildings and industry. 5 refs.