WorldWideScience

Sample records for energy conservation standards

  1. Building Standards and Codes for Energy Conservation

    Science.gov (United States)

    Gross, James G.; Pierlert, James H.

    1977-01-01

    Current activity intended to lead to energy conservation measures in building codes and standards is reviewed by members of the Office of Building Standards and Codes Services of the National Bureau of Standards. For journal availability see HE 508 931. (LBH)

  2. 77 FR 59712 - Energy Conservation Program: Energy Conservation Standards for Dishwashers

    Science.gov (United States)

    2012-10-01

    ... amended energy conservation standards, DOE conducted a market survey using all available public... Energy Conservation Program: Energy Conservation Standards for Dishwashers AGENCY: Office of Energy... establish amended energy conservation standards for dishwashers in the Federal Register on May 30, 2012. DOE...

  3. 78 FR 73589 - Energy Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric...

    Science.gov (United States)

    2013-12-06

    ... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors; Proposed... Conservation Program: Energy Conservation Standards for Commercial and Industrial Electric Motors AGENCY... proposes energy conservation standards for a number of different groups of electric motors that DOE has not...

  4. 75 FR 20111 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Science.gov (United States)

    2010-04-16

    ... Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool... heating equipment and pool heaters. Table I.1--Amended Energy Conservation Standards for Residential Water... for national energy and water conservation; and 7. Other factors the Secretary of Energy (Secretary...

  5. 75 FR 17036 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction

    Science.gov (United States)

    2010-04-05

    ... Conservation Program: Energy Conservation Standards for Small Electric Motors; Correction AGENCY: Office of... standards for small electric motors, which was published on March 9, 2010. In that final rule, the U.S... titled ``Energy Conservation Standards for Small Electric Motors.'' 75 FR 10874. Since the publication of...

  6. 78 FR 51463 - Energy Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures

    Science.gov (United States)

    2013-08-20

    ... merging the metal halide lamp fixture and the high-intensity discharge (HID) lamp rulemakings. This NOPR... Conservation Program: Energy Conservation Standards for Metal Halide Lamp Fixtures; Proposed Rule #0;#0;Federal...: Energy Conservation Standards for Metal Halide Lamp Fixtures AGENCY: Office of Energy Efficiency and...

  7. 78 FR 20842 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2013-04-08

    ... DeLonghi); energy and environmental advocates (American Council for an Energy Efficient Economy (ACEEE... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EERE-2013-BT-STD-0020] RIN 1904-AC98 Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and Room Air Conditioners...

  8. 78 FR 72533 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-03

    ... published on October 23, 2013. That final rule adopted changes to definitions and energy conservation... revised definition and revised energy conservation standards for small duct high velocity central air... Congress has provided in the AEMTCA for the Secretary of Energy to revise definitions and energy...

  9. 77 FR 8525 - Energy Conservation Program: Energy Conservation Standards for Standby Mode and Off Mode for...

    Science.gov (United States)

    2012-02-14

    ... way of representing consumer NPV), and (2) the monetary value of the benefits of emission reductions... standards to the Nation (energy savings, positive NPV of consumer benefits, consumer LCC savings, and... and Conservation Act (EPCA) prescribes energy conservation standards for various consumer products and...

  10. 75 FR 12144 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2010-03-15

    .... 1. Consensus Agreement On January 26, 2010, the Air-Conditioning, Heating and Refrigeration... subsections. B. History of the Standards Rulemaking for Residential Furnaces 1. Background Energy conservation... recommending minimum energy conservation standards for residential central air conditioners, heat pumps, and...

  11. 77 FR 10997 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction

    Science.gov (United States)

    2012-02-24

    ... Conservation Program: Energy Conservation Standards for Distribution Transformers; Correction AGENCY: Office of... standards for distribution transformers. It was recently discovered that values in certain tables of the...,'' including distribution transformers. The Energy Policy Act of 1992 (EPACT 1992), Public Law 102-486, amended...

  12. 75 FR 21981 - Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct...

    Science.gov (United States)

    2010-04-27

    ... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EE-2006-BT-STD-0129] RIN 1904-AA90 Energy Conservation Program: Energy Conservation Standards for Residential Water Heaters, Direct Heating Equipment, and Pool Heaters Correction In rule document 2010-7611 beginning on page 20112 in the issue of Friday...

  13. 77 FR 32307 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-05-31

    ... energy conservation standards for various consumer products and certain commercial and industrial... Efficiency Levels 5. Proprietary Designs 6. Reverse Engineering D. Markups Analysis E. Energy and Water Use... per-cycle hot water energy consumption; (2) the total weighted per-cycle machine electrical energy...

  14. 76 FR 70547 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-11-14

    ... the term ``fluorescent lamp,'' which EPCA defines as ``a low pressure mercury electric-discharge... discharge into light,'' and as including the four enumerated types of fluorescent lamps for which EPCA... Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts; Final Rule #0;#0;Federal...

  15. 78 FR 25626 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Science.gov (United States)

    2013-05-02

    ... Conservation Program for Consumer Products: Energy Conservation Standards for Ceiling Fans and Ceiling Fan... for residential ceiling fans and ceiling fan light kits in the Federal Register. This document... other aspect of the rulemaking for ceiling fans and ceiling fan light kits. The comment period is...

  16. Determination analysis of energy conservation standards for distribution transformers

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, P.R.; Van Dyke, J.W.; McConnell, B.W.; Das, S.

    1996-07-01

    This report contains information for US DOE to use in making a determination on proposing energy conservation standards for distribution transformers as required by the Energy Policy Act of 1992. Potential for saving energy with more efficient liquid-immersed and dry-type distribution transformers could be significant because these transformers account for an estimated 140 billion kWh of the annual energy lost in the delivery of electricity. Objective was to determine whether energy conservation standards for distribution transformers would have the potential for significant energy savings, be technically feasible, and be economically justified from a national perspective. It was found that energy conservation for distribution transformers would be technically and economically feasible. Based on the energy conservation options analyzed, 3.6-13.7 quads of energy could be saved from 2000 to 2030.

  17. 76 FR 52852 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-08-24

    ... INFORMATION CONTACT: Stephen L. Witkowski, U.S. Department of Energy, Office of Energy Efficiency and...-0121, (202) 586-7463, e-mail: stephen[email protected] . Ms. Elizabeth Kohl, U.S. Department of... paragraphs (b) and (h) to read as follows: Sec. 430.32 Energy and water conservation standards and their...

  18. 76 FR 43941 - Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment

    Science.gov (United States)

    2011-07-22

    ... included the HPBA membership directory, Air-Conditioning, Heating, and Refrigeration Institute (AHRI.... Summary of the Proposed Rule II. History of the Energy Conservation Standards Rulemaking and Current... notice. DOE's rationale is presented in further detail immediately below. II. History of the Energy...

  19. 10 CFR 430.34 - Energy and water conservation standards amendments

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy and water conservation standards amendments 430.34 Section 430.34 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY CONSERVATION PROGRAM FOR CONSUMER PRODUCTS Energy and Water Conservation Standards § 430.34 Energy and water conservation standards...

  20. 24 CFR 968.115 - Modernization and energy conservation standards.

    Science.gov (United States)

    2010-04-01

    ... changing or installing a new utility system, conduct a life-cycle cost analysis, reflecting installation... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Modernization and energy conservation standards. 968.115 Section 968.115 Housing and Urban Development Regulations Relating to Housing...

  1. 10 CFR 431.446 - Small electric motors energy conservation standards and their effective dates. [Reserved

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Small electric motors energy conservation standards and... CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Small Electric Motors Energy Conservation Standards § 431.446 Small electric motors energy conservation standards and their...

  2. 10 CFR 431.156 - Energy and water conservation standards and effective dates.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy and water conservation standards and effective dates. 431.156 Section 431.156 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM... Standards § 431.156 Energy and water conservation standards and effective dates. Each commercial clothes...

  3. 78 FR 9631 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-11

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Residential Boilers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of public meeting.... Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J...

  4. 77 FR 38743 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Battery...

    Science.gov (United States)

    2012-06-29

    ... Efficiency Program for Consumer Products: Energy Conservation Standards for Battery Chargers and External Power Supplies AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION... Energy Efficiency and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue SW...

  5. 75 FR 31323 - Energy Efficiency Program: Energy Conservation Standards Furnace Fans: Public Meeting and...

    Science.gov (United States)

    2010-06-03

    .... EERE-2010-BT-STD-0011] RIN 1904-AC22 Energy Efficiency Program: Energy Conservation Standards Furnace Fans: Public Meeting and Availability of the Framework Document AGENCY: Office of Energy Efficiency and... Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies, EE-2J, 1000 Independence...

  6. 78 FR 54197 - Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards...

    Science.gov (United States)

    2013-09-03

    .... EERE-2013-BT-STD-0030] RIN 1904-AD01 Energy Efficiency Program for Commercial and Industrial Equipment: Energy Conservation Standards for Commercial Packaged Boilers AGENCY: Office of Energy Efficiency and..., Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE-2J, 1000 Independence...

  7. 76 FR 22324 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-04-21

    ... standards, the current standards for room air conditioners and clothes dryers, and the history of the... Residential Clothes Dryers and Room Air Conditioners AGENCY: Office of Energy Efficiency and Renewable Energy... equipment, including residential clothes dryers and room air conditioners. EPCA also requires the U.S...

  8. 78 FR 16443 - Energy Efficiency Program for Consumer Products: Energy Conservation Standards for Ceiling Fans...

    Science.gov (United States)

    2013-03-15

    ... Standards for Ceiling Fans and Ceiling Fan Light Kits AGENCY: Office of Energy Efficiency and Renewable... consider amending the energy conservation standards for ceiling fans and ceiling fan light kits. DOE also....gov . Follow the instructions for submitting comments. Email: CeilingFan[email protected

  9. 77 FR 18477 - Energy Conservation Program: Energy Conservation Standards for Battery Chargers and External...

    Science.gov (United States)

    2012-03-27

    .... Summary of the Proposed Rule A. Benefits and Costs to Consumers B. Impact on Manufacturers C. National.... Discount Rates 12. Benefits From Effects of Standards on Energy Prices H. Consumer Subgroup Analysis I... Impact Analysis a. Significance of Energy Savings b. Net Present Value of Consumer Costs and Benefits c...

  10. 78 FR 77019 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products

    Science.gov (United States)

    2013-12-20

    ... air conditioning heat pump'' that were established in section 5 of the American Energy Manufacturing... heat pump'' product class, including the definition and standards. DATES: DOE will accept comments....gov . Table of Contents I. Background and Authority II. Discussion III. Procedural Requirements A...

  11. 75 FR 59469 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2010-09-27

    .... Methodology and Discussion A. Market and Technology Assessment 1. Exclusion of Wine Coolers From This.... Benefits From Effects of Standards on Energy Prices H. Consumer Subgroup Analysis I. Manufacturer Impact.... Net Present Value of Consumer Costs and Benefits c. Indirect Impacts on Employment 4. Impact on...

  12. 77 FR 2355 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-01-17

    ... advantages; distributive impacts; and equity); (4) to the extent feasible, specify performance objectives... Defense Council (NRDC), the Northwest Energy Efficiency Alliance (NEEA), and the Northwest Power and... Strategic Plan commits the Department to reviewing minimum appliance efficiency standards at least every 5...

  13. Residential Energy Use and Conservation. Economics, Demographics, and Standards

    Energy Technology Data Exchange (ETDEWEB)

    Brounen, D. [Department of Financial Management, Erasmus University Rotterdam, Rotterdam (Netherlands); Kok, N. [Limburg Institute of Financial Economics LIFE, Maastricht University, Maastricht (Netherlands); Quigley, J.M. [Department of Economics, University of California, Berkeley, CA (United States)

    2011-03-15

    Energy consumption in the residential sector offers an important opportunity for conserving resources. However, much of the current debate regarding energy efficiency in the housing market focuses on the physical and technical determinants of energy consumption, neglecting the role of the economic behavior of resident households. In this paper, we analyze the extent to which the use of gas and electricity is determined by the technical specifications of the dwelling as compared to the demographic characteristics of the occupying household, using a unique set of microeconomic data for a sample of more than 300,000 Dutch homes. The results show that residential gas consumption is determined principally by structural dwelling characteristics, such as the vintage, building type and quality of the home, while electricity consumption varies more directly with household composition, in particular income and family composition. Combining these results with projections on future economic and demographic trends, we find that, absent price increases for residential energy, the aging of the population and their increasing wealth will mostly offset improvements in the energy efficiency of the building stock resulting from policy interventions and natural revitalization.

  14. 76 FR 39245 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-07-06

    ... Wes.Anderson@ee.doe.gov . Mr. Eric Stas or Ms. Jennifer Tiedeman, U.S. Department of Energy, Office of.... Wesley Anderson (central air conditioners and heat pumps), U.S. Department of Energy, Office of Energy...

  15. ASEAN-USAID buildings energy conservation project. Volume 1, Energy standards: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Levine, M.D.; Busch, J.F. [eds.][Lawrence Berkeley Lab., CA (United States); Deringer, J.J. [Deringer Group, Riva, MD (United States)

    1992-06-01

    Mandatory or voluntary energy-efficiency standards for new or existing buildings can play an important role in a national program aimed at promoting energy conservation. Building codes and standards can provide a degree of control over design and building practices throughout the construction process, and encourage awareness of energy-conscious design. Studies in developed countries indicate that efficiency standards can produce energy reductions on the order of 20 to 40% or more. Within ASEAN, analyses of the savings potential from the proposed standards suggest that if implemented, these standards would produce savings over current new design practice of 19% to 24%. In this volume we provide an overview of the ASEAN-USAID project aimed at promulgating standards for energy efficiency in commercial buildings. The process of developing and implementing energy-efficiency standards for buildings can be subdivided into two key components: policy development; and technical and economic analysis. Each of these involves a number of steps and processes, as outlined in Figure 1-1. This volume describes the technical and economic analyses used to develop the proposed energy efficiency standards for four countries (Malaysia, Thailand, the Philippines, and Indonesia), and to refine an energy standard existing in Singapore since 1979. Though oriented toward the ASEAN region, the analysis methods described here are applicable in a range of settings, provided appropriate modifications are made for local building construction, climatic, economic, and political conditions. Implementation issues are not specifically addressed here; rather this volume is oriented towards the analytical work needed to establish or revise an energy standard for buildings.

  16. 77 FR 31964 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers

    Science.gov (United States)

    2012-05-30

    ... Costs (Annualized) of the Standards III. Public Participation A. Submission of Comments B. Public..., DOE received the ``Agreement on Minimum Federal Efficiency Standards, Smart Appliances, Federal... submitted by groups representing manufacturers (the Association of Home Appliance Manufacturers (AHAM...

  17. 75 FR 27227 - Energy Conservation Program: Energy Conservation Standards for Residential Central Air...

    Science.gov (United States)

    2010-05-14

    ...-7335. E-mail: Wes.Anderson@ee.doe.gov . Ms. Elizabeth Kohl, U.S. Department of Energy, Office of the... additional information regarding visiting the Resource Room. FOR FURTHER INFORMATION CONTACT: Mr. Wes Anderson, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building...

  18. 78 FR 42389 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2013-07-16

    ... conditioners without reverse cycle and with louvered sides as 24,999 British thermal units per hour (Btu/ h... and with louvered sides as 25,000 Btu/h, rather than 27,999 Btu/h and 28,000 Btu/h, respectively...: Stephen L. Witkowski, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy...

  19. 78 FR 55781 - Energy Conservation Program: Energy Conservation Standards for Walk-In Coolers and Freezers

    Science.gov (United States)

    2013-09-11

    ... Affiliation docket AFM Corporation AFM Manufacturer 0012.1 Air-Conditioning, Heating, and AHRI Trade... Refrigeration Products LLC. Heatcraft Manufacturer 0058.1, 0069.1 Heating, Air-conditioning & HARDI Trade.... Introduction A. Authority B. Background 1. Current Standards 2. History of Standards Rulemaking for Walk-In...

  20. 78 FR 55889 - Energy Conservation Program: Energy Conservation Standards for Commercial Refrigeration Equipment

    Science.gov (United States)

    2013-09-11

    ... in ANSI/Air- Conditioning and Refrigeration Institute (ARI) Standard 1200-2006, appendix D. [dagger... Manufacturers C. National Benefits II. Introduction A. Authority B. Background 1. Current Standards 2. History... class terminology. ** ``TDA'' is the total display area of the case, as measured in the Air...

  1. 76 FR 20089 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-04-11

    ... discussed the following major issues at the public meeting: the pros and cons of various efficiency metrics... of Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue, SW., Washington... copies. 4. Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies...

  2. 75 FR 41102 - Energy Conservation Program: Energy Conservation Standards for Furnace Fans: Reopening of Public...

    Science.gov (United States)

    2010-07-15

    ... Furnace Fans: Reopening of Public Comment Period AGENCY: Office of Energy Efficiency and Renewable Energy... work of residential heating and cooling systems (``furnace fans''). The comment period closed on July 6... information relevant to the furnace fan rulemaking will be accepted until July 27, 2010. ADDRESSES: Interested...

  3. 77 FR 7281 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Science.gov (United States)

    2012-02-10

    ... Electrical Efficiencies for all Liquid-Immersed Distribution Transformer Equipment Classes (Compliance... ``customers.'' Customers refer to electric utilities in the case of liquid-immersed transformers, and to... for Determining Energy Efficiency for Distribution Transformers'' published by the National Electrical...

  4. 76 FR 37407 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-06-27

    .... Background 1. Current Standards a. Furnaces b. Central Air Conditioners and Heat Pumps 2. History of... Compliance Requirements a. Central Air Conditioning and Heat Pumps b. Residential Furnaces 3. Duplication... residential central air conditioners and central air conditioning heat pumps (air conditioners and heat pumps...

  5. 78 FR 25627 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for...

    Science.gov (United States)

    2013-05-02

    ... average life of the product in the type (or class) compared to any increase in the price of, or in the... well as the market penetration of such equipment. b. Three-Phase Equipment With an Input Capacity Less... standards. This is done by applying a markup multiplier to the manufacturer's [[Page 25632

  6. 75 FR 10873 - Energy Conservation Program: Energy Conservation Standards for Small Electric Motors

    Science.gov (United States)

    2010-03-09

    ... and Kilowatt Ratings i. Summary 2. Product Classes B. Screening Analysis C. Engineering Analysis 1. Product Classes Analyzed 2. Baseline Models a. Baseline Efficiencies b. Baseline Temperature Rise c... discuss, and receive comments on, these subjects, DOE's proposed product classes, potential standard...

  7. 76 FR 25622 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards for...

    Science.gov (United States)

    2011-05-05

    ... also requires that each time the corresponding consensus standard--the American Society of Heating... this analysis, as well as the submission of data and other relevant information. DATES: DOE will accept... Information Number (RIN) 1904-AC47. Comments may be submitted using any of the following methods: 1. Federal e...

  8. 77 FR 32381 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-05-31

    ... on a CD. It is not necessary to include printed copies. 4. Hand Delivery/Courier: Ms. Brenda Edwards... washers under TSL 3, the first number for consumer impacts refers to the standard in 2015, and the second... the value of CO 2 reductions is based on a global value. Second, the assessments of operating cost...

  9. 78 FR 7296 - Energy Conservation Program: Energy Conservation Standards for Small, Large, and Very Large...

    Science.gov (United States)

    2013-02-01

    ... Unit Challenge (RTU Challenge). This program provides a market mechanism that reduces barriers for... commercial air-cooler air conditioners and heat pumps in the field. \\7\\ U.S. Department of Energy. Building... the IEER more than the EER for commercial air conditioners and heat pumps. D. Engineering Analysis The...

  10. 75 FR 23191 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Certain...

    Science.gov (United States)

    2010-05-03

    ... Impact Analysis The NIA estimates the national energy savings (NES) and the net present value (NPV) of... to public comments. Accordingly, DOE intends to present the results of its analyses in the notice of... the real consumer cost of capital and puts the LCC in present-value terms. The PBP represents the...

  11. 76 FR 57515 - Energy Conservation Program: Energy Conservation Standards for Residential Refrigerators...

    Science.gov (United States)

    2011-09-15

    ... Contents I. Summary of the Final Rule and Its Benefits II. Introduction A. Authority B. Background 1... Wine Coolers From This Rulemaking 2. Product Classes a. General Discussion Regarding Added Product... Cost per Unit 4. Site-to-Source Energy Conversion 5. Discount Rates 6. Benefits From Effects of...

  12. 76 FR 26656 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-05-09

    ... (202) 586-2945 or e-mail: [email protected] . FOR FURTHER INFORMATION CONTACT: Stephen L...: stephen[email protected] . Ms. Elizabeth Kohl, U.S. Department of Energy, Office of General Counsel.... 6291-6309; 28 U.S.C. 2461 note. 2. Revise Sec. 430.32 paragraphs (b), and (h) to read as follows: Sec...

  13. 77 FR 40530 - Energy Conservation Standards for Residential Furnace Fans: Public Meeting and Availability of...

    Science.gov (United States)

    2012-07-10

    ... heating, ventilation, and air-conditioning (HVAC) systems for the purpose of circulating air through duct... INFORMATION: Table of Contents I. Authority II. History of Energy Conservation Standards Rulemaking for... circulating air through duct work, hereinafter referred to as ``residential furnace fans'' or simply ``furnace...

  14. 77 FR 32916 - Energy Conservation Standards for Distribution Transformers: Public Meeting and Availability of...

    Science.gov (United States)

    2012-06-04

    ...-2010-BT-STD-0048] RIN 1904-AC04 Energy Conservation Standards for Distribution Transformers: Public... information that it is making available about the liquid-immersed distribution transformer equipment classes... equipment classes for several different types of liquid-immersed distribution transformers. In addition to...

  15. Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 through 2012

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, Stephen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Alison [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-04-01

    This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2012. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2012, the standards saved an estimated 3.6 quads of primary energy, which is equivalent to 3% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $51.4 billion. The average household saved $347 in operating costs as a result of residential and plumbing product standards. The estimated reduction in CO2 emissions associated with the standards in 2012 was 198 million metric tons, which is equivalent to 3% of total U.S. CO2 emissions. The estimated cumulative energy savings over the period 1990-2070 amount to 179 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a past and projected cumulative net present value (NPV) of consumer benefit of between $1,104 billion and $1,390 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.8 trillion gallons in 2012, and will achieve cumulative water savings by 2040 of 54 trillion gallons. The estimated consumer savings in 2012 from reduced water use amounted to $13 billon.

  16. Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 Through 2015

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, Stephen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Williams, Alison [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Sarah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-02-17

    This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2015. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2015, the standards saved an estimated 4.49 quads of primary energy, which is equivalent to 5% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $63.4 billion. The average household saved $320 in operating costs as a result of residential appliance standards. The estimated reduction in CO2 emissions associated with the standards in 2015 was 238 million metric tons, which is equivalent to 4.3% of total U.S. CO2 emissions. The estimated cumulative energy savings over the period 1990-2090 amount to 216.9 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a cumulative net present value (NPV) of consumer benefit of between $1,627 billion and $1,887 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.9 trillion gallons in 2015 and estimated cumulative water savings by 2090 amount to 55 trillion gallons. The estimated consumer savings in 2015 from reduced water use amounted to $12 billon.

  17. Recommendations for energy conservation standards for new residential buildings - volume 3: Introduction and Background to the Standard Development Effort

    Energy Technology Data Exchange (ETDEWEB)

    1989-05-01

    The Energy Conservation for New Buildings Act of 1976, as amended, 42 U.S.C Section 6831 et. seq. requires the US Department of Energy to issue energy conservation standards for the design of new residential and commercial buildings. The standards will be mandatory only for the design of new federal buildings, and will serve as voluntary guidelines for the design of new non-federal buildings. This report documents the development and testing of a set of recommendations, from the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE) Special Projects Committee No. 53, designed to provide the technical foundation for the Congressionally-mandated energy standard for new residential buildings. The recommendations have been developed over the past 25 months by a multidisciplinary project team, under the management of the US Department of Energy and its prime contractor, Pacific Northwest Laboratory. Volume III -- Introduction and Background to the Standard Development Effort is a description of the Standard development process and contains the rationale for the general approach and specific criteria contained within the recommendations.

  18. DEMONSTRATION OF THE DOE INTERIM ENERGY CONSERVATION STANDARDS FOR NEW FEDERAL RESIDENTIAL BUILDINGS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, A. D.; Baechler, H. C.; Di Massa, F. V.; Lucas, R. G.; Shankle, D. L.

    1992-01-01

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has sponsored a study to demonstrate use of its Interim Energy Conservation Standards for New Federal Residential Buildings. The demonstration study was conducted by DOE and the Pacific Northwest Laboratory (PNL). The demonstration is the second step in a three-step process: I) development of interim standards, 2) demonstration of the interim standards, and 3) development of final standards. The standards are mandatory for federal agency housing procurements. Nevertheless, PNL found at the start of the demonstration that agency use of the interim standards had been minimal. The purpose of the standards is to improve the energy efficiency of federal housing and increase the use of nondepletable energy sources. In accordance with the legislation, the standards were to be performance-based rather than prescribing specific energy conservation measures. To fulfill this aspect of the legislation, the standards use a computer software program called COSTSAFR which generates a point system that individualizes the standards to specific projects based on climate, housing type, and fuel costs. The standards generate minimum energy-efficiency requirements by applying the life-cycle cost methodology developed for federal projects. For the demonstration, PNL and DOE chose five federal agency housing projects which had been built in diverse geographic and climate regions. Participating agencies were the Air Force, the Army (which provided two case studies), the Navy, and the Department of Health and Human Services. PNL worked with agency housing procurement officials and designers/architects to hypothetically apply the interim standards to the procurement and design of each housing project. The demonstration started at the point in the project where agencies would establish their energyefficiency requirements for the project and followed the procurement process through the designers' use of the point

  19. Energy and Economic Impacts of U.S. Federal Energy and Water Conservation Standards Adopted From 1987 Through 2013

    Energy Technology Data Exchange (ETDEWEB)

    Meyers, Stephen; Williams, Alison; Chan, Peter

    2014-06-30

    This paper presents estimates of the key impacts of Federal energy and water conservation standards adopted from 1987 through 2013. The standards for consumer products and commercial and industrial equipment include those set by legislation as well as standards adopted by DOE through rulemaking. In 2013, the standards saved an estimated 4.05 quads of primary energy, which is equivalent to 4% of total U.S. energy consumption. The savings in operating costs for households and businesses totaled $56 billion. The average household saved $361 in operating costs as a result of residential and plumbing product standards. The estimated reduction in CO{sub 2} emissions associated with the standards in 2013 was 218 million metric tons, which is equivalent to 4% of total U.S. CO{sub 2} emissions. The estimated cumulative energy savings over the period 1990-2090 amount to 181 quads. Accounting for the increased upfront costs of more-efficient products and the operating cost (energy and water) savings over the products’ lifetime, the standards have a past and projected cumulative net present value (NPV) of consumer benefit of between $1,271 billion and $1,487 billion, using 7 percent and 3 percent discount rates, respectively. The water conservation standards, together with energy conservation standards that also save water, reduced water use by 1.9 trillion gallons in 2013, and will achieve cumulative water savings by 2090 of 55 trillion gallons. The estimated consumer savings in 2013 from reduced water use amounted to $16 billon.

  20. Study on Laws, Regulations and Standards on Energy Efficiency, Energy Conserving and Emission Reduction of Industrial Boilers in EU

    Science.gov (United States)

    Liu, Ren; Zhao, Yuejin; Chen, Haihong; Liang, Xiuying; Yang, Ming

    2017-12-01

    Industrial boilers are widely applied in such fields as factory power, building heating, and people’s lives; China is the world’s largest producer and user of industrial boilers, with very high annual energy consumption; clear requirements have been put forward by China on the energy efficiency since the “11th Five-year Plan” with the hope to save energy and reduce emission by means of energy efficiency standards and regulations on the supervision and control of various special equipment. So far, the energy efficiency of industrial boilers in China has been improved significantly but there is still a gap with the EU states. This paper analyzes the policies of energy efficiency, implementation models and methods of supervision and implementation at the EU level from laws, regulations, directives as well as standards; the paper also puts forward suggestions of energy conserving and emission reduction on the improvement of energy conserving capacity of industrial boilers in China through studying the legislations and measures of the developed countries in energy conserving of boilers.

  1. 75 FR 7987 - Energy Conservation Standards for Residential Clothes Dryers and Room Air Conditioners: Public...

    Science.gov (United States)

    2010-02-23

    ... Conservation Standards for Residential Clothes Dryers and Room Air Conditioners: Public Meeting and... conservation standards for residential clothes dryers and room air conditioners; the analytical framework..., Mailstop EE-2J, Public Meeting for Residential Clothes Dryers and Room Air Conditioners, EERE-2007-BT-STD...

  2. 75 FR 14368 - Energy Conservation Standards for Residential Central Air Conditioners and Heat Pumps: Public...

    Science.gov (United States)

    2010-03-25

    ... Conservation Standards for Residential Central Air Conditioners and Heat Pumps: Public Meeting and Availability... conservation standards for residential central air conditioners and heat pumps; the analytical framework..., Mailstop EE-2J, Public Meeting for Residential Central Air Conditioners and Heat Pumps, EERE-2008-BT- STD...

  3. Revision of the energy conservation requirements in the manufactured home construction and safety standards

    Energy Technology Data Exchange (ETDEWEB)

    Conner, C C; Lee, A D; Lucas, R G; Taylor, Z T

    1992-02-01

    Thermal requirements were developed for manufactured (mobile) homes in response to legislation requiring the US Department of Housing and Urban Development (HUD) to revise its thermal standards for manufactured homes. A life-cycle cost minimization from the home owner's perspecetive was used to establish an optimum in a large number of cities for several prototype homes. The development of the economic, financial, and energy conservation measure parameters input into the life-cycle cost analysis was documented. The optimization results were aggregated to zones which were expressed as a maximum overall home U-value (thermal transmittance) requirement. The revised standard's costs, benefits, and net value to the consumer were quantified. 50 refs.

  4. 76 FR 78174 - Energy Conservation Program: Test Procedure and Energy Conservation Standard for Set-Top Boxes...

    Science.gov (United States)

    2011-12-16

    ... exist or are in development that would significantly affect consumer behavior and/or STB energy... consumption for future models of STBs, and projected usage profiles based on new studies on consumer behavior... functionality.\\15\\ The DVR alters STB behavior and consumer behavior by allowing the consumer to record content...

  5. 77 FR 49739 - Energy Conservation Standards for Residential Dehumidifiers: Public Meeting and Availability of...

    Science.gov (United States)

    2012-08-17

    ... shares, or other commercial matters regulated by U.S. antitrust laws. After the public meeting and the..., Public Law 94-163, (42 U.S.C. 6291-6309), as amended, established an energy conservation program for...-designated Part A for editorial reasons. The Energy Policy Act of 2005 (EPACT 2005), Public Law 109-58...

  6. Handbook on energy conservation

    International Nuclear Information System (INIS)

    1989-12-01

    This book shows energy situation in recent years, which includes reserves of energy resource in the world, crude oil production records in OPEC and non OPEC, supply and demand of energy in important developed countries, prospect of supply and demand of energy and current situation of energy conservation in developed countries. It also deals with energy situation in Korea reporting natural resources status, energy conservation policy, measurement for alternative energy, energy management of Korea, investment in equipment and public education for energy conservation.

  7. Selling energy conservation.

    Science.gov (United States)

    Hinrichsen, D

    1995-01-01

    This article concerns the Organization of the Petroleum Exporting Countries (OPEC) crisis and its impact on energy efficiency measures in the US. In 1985, when the OPEC collapsed, the US government had avoided the need to construct 350 gigawatts of new electric capacity. The most successful efficiency improvements, especially in household appliances and equipment, lighting and tightened energy efficiency standards in new buildings, resulted from the OPEC event. The real innovation of that time was the change in profit rules for utilities. This revolution and the way some US utilities view energy have not caught on elsewhere. Despite the initiative toward improving energy efficiency in homes, offices and industries, the change has been slow. Partly to blame are the big development banks, which pointed out that short-term conservation and efficiency measures could save at least 15% of the total energy demand without the need for major investment. The benefits of energy conservation was shown during the oil shock when per capita energy consumption fell by 5% in the member states of the Organization of Economic Cooperation and Development, while the per capita gross domestic product grew by a third. There has been a decrease in energy expenditure worldwide, and the scope for further energy savings is enormous, but governments need to recognize and seize the opportunity.

  8. 77 FR 43015 - Energy Conservation Standards for Commercial and Industrial Electric Motors: Public Meeting and...

    Science.gov (United States)

    2012-07-23

    ... following seven factors: 1. The economic impact of the standard on manufacturers and customers of equipment... evaluating. This relationship serves as the basis for cost-benefit calculations for individual customers... Period Analyses E. National Impact Analysis IV. Public Participation I. Statutory Authority The Energy...

  9. Japan's energy conservation policy

    International Nuclear Information System (INIS)

    Yoda, Kenichi

    1990-01-01

    This article reviews developments in Japanese energy conservation since the 1970s. The industrial sector has achieved the greatest success, due to industrial restructuring as well as improvements in energy efficiency. In the residential/commercial sector, the efficiency of appliances has been much improved. Although improvements have been made in the fuel efficiency of passenger cars, energy consumption in the transportation sector has risen slightly owing to increased transport of passengers and freight. The overall responsibility for energy conservation policy rests with the Ministry of International Trade and Industry. MITI is also responsible for implementing specific conservation policies in regard to the industrial and commercial sectors. In the residential sector, MITI works with the Ministry of Construction and in the transportation sector with the Ministry of Transport. To realize the goals of energy conservation policy through general research, dissemination of public information and other activities, MITI works with the Energy Conservation Center (ECC). (author). 2 figs, 3 tabs

  10. 76 FR 11396 - Energy Conservation Standards for Distribution Transformers: Public Meeting and Availability of...

    Science.gov (United States)

    2011-03-02

    ... impact of the standard on manufacturers and customers of equipment subject to the standard; 2. The... relationship serves as the basis for cost-benefit calculations for individual customers, manufacturers, and the... PBP analyses determine the economic impact of potential standards on individual customers. The LCC is...

  11. 76 FR 18127 - Energy Conservation Standards for Metal Halide Lamp Fixtures: Public Meeting and Availability of...

    Science.gov (United States)

    2011-04-01

    ... in-depth technical analyses in the following areas for the MHLFs currently under consideration: (1... preliminary work on the manufacturer impact analysis and identified the methods to be used for the LCC... Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy...

  12. Environmental assessment in support of proposed voluntary energy conservation standard for new residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, D.L.; Parker, G.B.; Callaway, J.W.; Marsh, S.J.; Roop, J.M.; Taylor, Z.T.

    1989-06-01

    The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. 49 refs., 15 tabs.

  13. 77 FR 7547 - Energy Conservation Standards for Wine Chillers and Miscellaneous Refrigeration Products: Public...

    Science.gov (United States)

    2012-02-13

    ... Energy. ACTION: Notice of public meeting and availability of the framework document. SUMMARY: The U.S... of this notice. To inform stakeholders and facilitate this process, DOE has prepared a framework... set at ENERGY STAR levels effective in 2005 for the two most popular product classes of refrigerators...

  14. 77 FR 48108 - Energy Conservation Standards for Commercial Clothes Washers: Public Meeting and Availability of...

    Science.gov (United States)

    2012-08-13

    ... commercial matters regulated by U.S. antitrust laws. After the public meeting and the expiration of the.... Code, for editorial reasons.) The Energy Policy Act of 2005 (EPACT 2005), Public Law 109-58, further...

  15. Energy conservation in industry

    International Nuclear Information System (INIS)

    Pembleton, P.

    1992-01-01

    Energy Conservation in Industry is the first number in the Energy and Environmental Series of the Industrial and Technological Information Bank (INTIB). The Series supersedes the INECA Journal and reflects the broader information programme undertaken by INTIB. The present number of the Series contains contributions from three major international databases and five topic-specific sources, including three United Nations Organizations. The present publication consists of a recent technical report on a current topic: reducing energy loss in four industrial sectors and improving energy conservation through waste-heat recovery, followed by two sections containing abstracts of technical materials

  16. 76 FR 17573 - Energy Conservation Standards for Commercial Refrigeration Equipment: Public Meeting and...

    Science.gov (United States)

    2011-03-30

    ... INFORMATION: I. Statutory Authority II. History of Standards Rulemaking for Commercial Refrigeration Equipment... feedback from interested parties on its analytical framework, models, and preliminary results. II. History... equipment installed in the field, such as in grocery stores and restaurants. DOE also carries out additional...

  17. 78 FR 14717 - Energy Conservation Standards for Set-Top Boxes: Availability of Initial Analysis

    Science.gov (United States)

    2013-03-07

    ... quantitative output of this model is the industry net present value (INPV), which DOE calculates as the sum of... consumer cost of capital and puts the LCC in present-value terms. The PBP represents the number of years... present value (NPV) of total consumer costs and savings expected to result from potential new standards at...

  18. 75 FR 56021 - Energy Conservation Standards for Battery Chargers and External Power Supplies: Public Meeting...

    Science.gov (United States)

    2010-09-15

    ... energy savings (NES) and the net present value (NPV) of total consumer costs and savings expected to... and puts the LCC in present-value terms. The PBP is the number of years needed to recover the increase...) national impact analysis (NIA). The preliminary TSD presents the methodology and results of each of these...

  19. Energy audit for energy conservation

    International Nuclear Information System (INIS)

    Kanetkar, V.V.

    1996-01-01

    Energy audit is a very effective management tool for betterment of plant performance. The energy audit has a problem solving approach rather than a fault finding technique. The energy conservation is a rational use of energy. It has been the experience of the developed countries that energy is one issue which results into cost savings with relatively much less efforts/cost in comparison with other resources used in production, development and adoption of energy efficiency equipment and practices in most of production process has been the result of same technique. (author). 1 tab

  20. Promoting household energy conservation

    International Nuclear Information System (INIS)

    Steg, Linda

    2008-01-01

    It is commonly assumed that households must change their behaviour to reduce the problems caused by increasing levels of fossil energy use. Strategies for behaviour change will be more effective if they target the most important causes of the behaviour in question. Therefore, this paper first discusses the factors influencing household energy use. Three barriers to fossil fuel energy conservation are discussed: insufficient knowledge of effective ways to reduce household energy use, the low priority and high costs of energy savings, and the lack of feasible alternatives. Next, the paper elaborates on the effectiveness and acceptability of strategies aimed to promote household energy savings. Informational strategies aimed at changing individuals' knowledge, perceptions, cognitions, motivations and norms, as well as structural strategies aimed at changing the context in which decisions are made, are discussed. This paper focuses on the psychological literature on household energy conservation, which mostly examined the effects of informational strategies. Finally, this paper lists important topics for future research

  1. Energy conservation, efficiency and energy audit

    International Nuclear Information System (INIS)

    Sharma, R.A.

    2006-01-01

    In this paper the author discusses the conservation, efficiency, audit, fundamentals, differences and methods, the objectives of energy conservation, definitions of energy audit, scope, short term, medium term and long term measures to be taken for conservation are discussed

  2. Why not energy conservation?

    International Nuclear Information System (INIS)

    Carlson, Shawn

    2016-01-01

    Energy conservation is a deep principle that is obeyed by all of the fundamental forces of nature. It puts stringent constraints on all systems, particularly systems that are ‘isolated,’ meaning that no energy can enter or escape. Notwithstanding the success of the principle of stationary action, it is fair to wonder to what extent physics can be formulated from the principle of stationary energy. We show that if one interprets mechanical energy as a state function, then its stationarity leads to a novel formulation of classical mechanics. However, unlike Lagrangian and Hamiltonian mechanics, which deliver their state functions via algebraic proscriptions (i.e., the Lagrangian is always the difference between a system’s kinetic and potential energies), this new formalism identifies its state functions as the solutions to a differential equation. This is an important difference because differential equations can generate more general solutions than algebraic recipes. When applied to Newtonian systems for which the energy function is separable, these state functions are always the mechanical energy. However, while the stationary state function for a charged particle moving in an electromagnetic field proves not to be energy, the function nevertheless correctly encodes the dynamics of the system. Moreover, the stationary state function for a free relativistic particle proves not to be the energy either. Rather, our differential equation yields the relativistic free-particle Lagrangian (plus a non-dynamical constant) in its correct dynamical context. To explain how this new formalism can consistently deliver stationary state functions that give the correct dynamics but that are not always the mechanical energy, we propose that energy conservation is a specific realization of a deeper principle of stationarity that governs both relativistic and non-relativistic mechanics. (paper)

  3. Energy conservation technologies

    Energy Technology Data Exchange (ETDEWEB)

    Courtright, H.A. [Electric Power Research Inst., Palo Alto, CA (United States)

    1993-12-31

    The conservation of energy through the efficiency improvement of existing end-uses and the development of new technologies to replace less efficient systems is an important component of the overall effort to reduce greenhouse gases which may contribute to global climate change. Even though uncertainties exist on the degree and causes of global warming, efficiency improvements in end-use applications remain in the best interest of utilities, their customers and society because efficiency improvements not only reduce environmental exposures but also contribute to industrial productivity, business cost reductions and consumer savings in energy costs.

  4. Energy conservation in SIMMER

    International Nuclear Information System (INIS)

    Arnold, L.A.; Knowles, J.B.

    1983-11-01

    The SIMMER code contains models of the many interacting thermo-hydraulic processes that occur during a hypothetical core disruptive accident (HCDA), to provide an overall picture from accident initiation to containment loading. In calculations of roof loadings following the HCDA, errors in computing the overall energy balance were found to be up to ten times the kinetic energy of the sodium slug which creates the loading. On this account, the results were considered to be seriously compromised. This report describes a systematic investigation into the effect, nature and origin of the energy discrepancies. Its main conclusion are that, the errors stem from a systematic rather than a random source, energy errors for individual cells can be two decades larger than the mean value provided by the code, and cellular mass and energy errors are strongly correlated and they can actually increase when the mesh is refined. A likely cause of the conservation errors is identified as the solution of the liquid phase mass and energy equations at effectively different time instants during each timestep. (author)

  5. Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

  6. Electric energy utilization and conservation

    International Nuclear Information System (INIS)

    Tripathy, S.C.

    1991-01-01

    Various aspects of electric energy utilization and conservation are discussed. First chapter reviews thermodynamic aspects of energy conservation. Subsequent chapters describe possibilities and methods of energy conservation in thermal power plants, airconditioning and ventilation systems, electric lighting systems, electric heating systems in industries, and railway electrification. Chapter 8 describes various modes of energy storage and compares their economies. The next chapter discusses various facets of energy economics and the last chapter discusses the practical aspects of energy conservation in different industries and power utilities. (M.G.B.). 100 refs

  7. Energy conservation. Ambitions and results

    International Nuclear Information System (INIS)

    2011-01-01

    From results of monitoring it is shown that energy conservation in the Netherlands is behind the ambitions of the Dutch government. The Dutch Court of Audit examined the reasons why energy conservation targets are not met and what the consequences are for the national and European energy and climate goals for 2020. Also the Dutch Court of Audit looked at the possibilities to make energy saving policies more effective. [nl

  8. Dictionary of applied energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Kut, D

    1982-01-01

    The escalating cost of energy is drawing an ever increasing number of people into the planning and execution of energy conservation measures and programs and confronts them with the specialist terminology of the conservationist. The object of this illustrated dictionary is to list the generality of terms employed in energy conservation practice and to explain, with the aid of appropriate illustrations, the basic definitions and underlying techniques.

  9. Energy conservations from an environmental viewpoint

    Energy Technology Data Exchange (ETDEWEB)

    Hijikata, Kunio [Tokyo Inst. of Technology, Ohokayama, Meguroku (Japan)

    1993-12-31

    It is not incorrect to state that all major environmental problems, such as the greenhouse effect, destruction of the ozone layer from CFC`s, acid rain due to air pollution by NOx and SOx, etc., are caused by excessive industrial and residential energy consumption. Considering the finite world energy resources and limited global space, the day might be already upon us in which the total amount of energy consumption in the world should be reduced. To maintain a high living standard without increasing energy consumption, waste energy recovery and energy conservation are vitally important. In order to effective use of energy resources, we should really know the meaning of the energy consumption and the characteristics of energy resources. In this paper, the technological aspects of energy conservation are stated from the standpoint of available energy.

  10. Energy Building Regulations: The Effect of the Federal Performance Standards on Building Code Administration and the Conservation of Energy in New Buildings.

    Science.gov (United States)

    Kopper, William D.

    1980-01-01

    Explores the changes in the administration and enforcement of building regulations that will be engendered by the proposed federal energy building standards. Also evaluates the effectiveness of those standards in meeting congressional intent. Available from U.C. Davis Law Review, School of Law, Martin Luther King Jr. Hall, University of…

  11. Industrial energy conservation technology

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, P.S.; Williams, M.A. (eds.)

    1980-01-01

    A separate abstract was prepared for each of the 60 papers included in this volume, all of which will appear in Energy Research Abstracts (ERA); 21 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  12. Industrial Energy Conservation Technology

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A separate abstract was prepared for each of the 55 papers presented in this volume, all of which will appear in Energy Research Abstracts (ERA); 18 were selected for Energy Abstracts for Policy Analysis (EAPA). (MCW)

  13. Energy conservation and petroleum substitution

    Energy Technology Data Exchange (ETDEWEB)

    Kebbekus, J; Kraft-Woelfel, G

    1982-04-01

    Shortage and price increases for energy have caused large population groups to give new thought to the subject. For the knowledge on energy necessary to make a decision, ultimate consumers mostly rely on their social environment, personal contacts and the media. Important information on energy conservation should be provided by regional electric utilities. A concept for this purpose is discussed.

  14. Conservation Law Enforcement Program Standardization

    National Research Council Canada - National Science Library

    Rogers, Stan

    2004-01-01

    The ultimate goal of standardization is to develop a safe and effective program that is recognized within the USAF, DoD, and by other Federal and state law enforcement agencies, and the general public...

  15. 75 FR 17080 - Energy Conservation Standards for Walk-in Coolers and Walk-in Freezers: Public Meeting and...

    Science.gov (United States)

    2010-04-05

    ... conducted in-depth technical analyses in the following areas: (1) Engineering, (2) energy-use... preliminary work on the manufacturer impact analysis and identified the methods to be used for the LCC... Preliminary Technical Support Document AGENCY: Office of Energy Efficiency and Renewable Energy, Department of...

  16. Energy & Conservation Glossary. Third Edition.

    Science.gov (United States)

    Amend, John; And Others

    Defined in this glossary are nearly 800 terms related to energy and conservation. Space provided at the end of each alphabetic section allows users to add new words and definitions. This publication is part of a set of resources prepared for teachers by "Energy and Man's Environment." (Author/WB)

  17. Energy conservation applications of microprocessors

    Energy Technology Data Exchange (ETDEWEB)

    Shih, James Y.

    1979-07-01

    A survey of the application of microprocessors for industrial and commercial energy conservation has been made. Microprocessor applications for HVAC, chiller control, and automotive equipment are discussed. A case study of successful replacement of a conventional cooling plant control is recounted. The rapid advancement of microelectronic technology will affect efficient energy control, more sophisticated control methodology, and more investment in controls.

  18. Energy conservation in rented buildings

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Broechner, J.; Forsman, J.; Gaunt, L.; Holgersson, M.

    1984-08-01

    The bulletin is an anthology of nine essays by different authors addressing the issue of energy conservation in buildings, where there exists a landlord/tenant relationship. After an overview of the rental market and the stock of rental buildings different types of rental contracts and energy charges are described.

  19. Energy conservation in foundry

    International Nuclear Information System (INIS)

    Natu, V.M.

    1994-01-01

    In any foundry, the cost of fuel in the form of coal, oil or electrical power, is about 10 to 15% of the cost of the product. Saving of the order of 30 to 50% can be achieved in energy by reducing consumption of fuel and increasing efficiency. This has been illustrated by describing 4 examples in foundry industry. In each case, saving in terms of rupees is also indicated. (N.B.)

  20. Thermal Comfort and Strategies for Energy Conservation.

    Science.gov (United States)

    Rohles, Frederick H., Jr.

    1981-01-01

    Discusses studies in thermal comfort which served as the basis for the comfort standard. Examines seven variables in the human response to the thermal environment in terms of the ways in which they can be modified to conserve energy. (Author/MK)

  1. Conserving energy by eliminating waste

    Energy Technology Data Exchange (ETDEWEB)

    Jones, N. H.

    1979-07-01

    Some ways in which energy is wasted in industry are discussed and the losses involved are quantified. Reference is made to a particular loss in annealing furnaces; wasted energy in factory and lighting systems; heat generated by motors and lighting and by such processes as welding; unlagged hot pipework and most hot processes; and poor building envelope features. It is concluded that an industry should declare its intention of conservation at the highest possible level, identify conservation as a manufacturing target, and invest the responsibility in people for whom it is a full-time activity. (MCW)

  2. Hospital ventilation standards and energy conservation: a summary of the literature with conclusions and recommendations. Final report, FY 78

    Energy Technology Data Exchange (ETDEWEB)

    Hollowell, C.; Rosenfeld, A.

    1978-09-01

    This research examines the basis of current hospital HVAC standards and determines if they can be relaxed on criteria that do not compromise the health, safety, and comfort of patients and staff and has acceptance of the health care community. Chapter 2 summarizes existing standards in use throughout the United States governing hospital ventilation systems and the thermal environment. Chapter 3 explores the role of air in hospital-acquired infections. Chapter 4 explores the realm of indoor air quality within the hospital. Chapter 5 contains a discussion concerning the influence of thermal factors on patient comfort. Chapter 6 discusses the hospital odor problem with regards to ventilation rates. The final chapter includes conclusions and recommendations developed from the literature review and from a small working conference sponsored by the University of Minnesota School of Public Health.

  3. National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources: Industrial, Commercial, and Institutional Boilers - Guidance for Calculating Emission Credits Resulting from Implementation of Energy Conservation Measures

    Science.gov (United States)

    The purpose of this July 2012 document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule.

  4. Conservation and Renewable Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, K.H.

    1991-05-01

    This bibliography lists reports and selected papers published under the Oak Ridge National Laboratory Conservation and Renewable Energy Program from 1986 through February 1991. Information on documents published prior to 1986 can be obtained from ORNL. Most of the documents in the bibliography are available from Oak Ridge National Laboratory.

  5. Nonprice incentives and energy conservation.

    Science.gov (United States)

    Asensio, Omar I; Delmas, Magali A

    2015-02-10

    In the electricity sector, energy conservation through technological and behavioral change is estimated to have a savings potential of 123 million metric tons of carbon per year, which represents 20% of US household direct emissions in the United States. In this article, we investigate the effectiveness of nonprice information strategies to motivate conservation behavior. We introduce environment and health-based messaging as a behavioral strategy to reduce energy use in the home and promote energy conservation. In a randomized controlled trial with real-time appliance-level energy metering, we find that environment and health-based information strategies, which communicate the environmental and public health externalities of electricity production, such as pounds of pollutants, childhood asthma, and cancer, outperform monetary savings information to drive behavioral change in the home. Environment and health-based information treatments motivated 8% energy savings versus control and were particularly effective on families with children, who achieved up to 19% energy savings. Our results are based on a panel of 3.4 million hourly appliance-level kilowatt-hour observations for 118 residences over 8 mo. We discuss the relative impacts of both cost-savings information and environmental health messaging strategies with residential consumers.

  6. Foreign energy conservation integrated programs

    International Nuclear Information System (INIS)

    Lisboa, Maria Luiza Viana; Bajay, Sergio Valdir

    1999-01-01

    The promotion of energy economy and efficiency is recognized as the single most cost-effective and least controversial component of any strategy of matching energy demand and supply with resource and environmental constraints. Historically such efficiency gains are not out of reach for the industrialized market economy countries, but are unlikely to be reached under present conditions by developing countries and economics in transition. The aim of the work was to analyze the main characteristics of United Kingdom, France, Japan, Canada, Australia and Denmark energy conservation integrated programs

  7. Energy conservation. A goal for Albertans

    Energy Technology Data Exchange (ETDEWEB)

    Zwicky, L

    1988-01-01

    In late 1985, the Public Advisory Committees to the Environmental Council of Alberta began working toward a draft conservation strategy for Alberta. A prospectus was published and meetings and workshops held, the goal being a conservation strategy in place by 1992. This report is one of a series of discussion papers on relevant sectors such as agriculture, fish and wildlife, tourism, and various specific energy sources. This report focuses on energy use in general in the province, including the role of energy conservation in a conservation strategy, the potential for energy conservation, barriers, actions to encourage conservation, the impacts of conserving energy, and the next steps to take. 3 figs., 1 tab.

  8. Transportation energy conservation data book

    Energy Technology Data Exchange (ETDEWEB)

    Loebl, A. S.; Bjornstad, D. J.; Burch, D. F.; Howard, E. B.; Hull, J. F.; Madewell, D. G.; Malthouse, N. S.; Ogle, M. C.

    1976-10-01

    Statistics which characterize the major transportation modes are assembled and displayed, and data on other factors which influence the transportation sector in the nation are presented. Statistical data on energy use in the transportation sector are presented in the form of tables, graphs, and charts. The following topics are covered in six chapters: Characteristics of Transportation Modes; Energy Characteristics, including energy consumption by source and by sector and energy intensiveness; Conservation Alternatives; Government Impacts, including expenditures, regulations and research, development, and demonstration spending; Energy Supply, including domestic petroleum production, prices, and projections; and Transportation Demand, including population characteristics and economic determinants. A bibliography of data sources is provided at the end of each chapter. A more general bibliography glossary, and subject index are included at the end of the book.

  9. Energy conservation using face detection

    Science.gov (United States)

    Deotale, Nilesh T.; Kalbande, Dhananjay R.; Mishra, Akassh A.

    2011-10-01

    Computerized Face Detection, is concerned with the difficult task of converting a video signal of a person to written text. It has several applications like face recognition, simultaneous multiple face processing, biometrics, security, video surveillance, human computer interface, image database management, digital cameras use face detection for autofocus, selecting regions of interest in photo slideshows that use a pan-and-scale and The Present Paper deals with energy conservation using face detection. Automating the process to a computer requires the use of various image processing techniques. There are various methods that can be used for Face Detection such as Contour tracking methods, Template matching, Controlled background, Model based, Motion based and color based. Basically, the video of the subject are converted into images are further selected manually for processing. However, several factors like poor illumination, movement of face, viewpoint-dependent Physical appearance, Acquisition geometry, Imaging conditions, Compression artifacts makes Face detection difficult. This paper reports an algorithm for conservation of energy using face detection for various devices. The present paper suggests Energy Conservation can be done by Detecting the Face and reducing the brightness of complete image and then adjusting the brightness of the particular area of an image where the face is located using histogram equalization.

  10. Personality traits and energy conservation

    International Nuclear Information System (INIS)

    Shen, Meng; Cui, Qingbin; Fu, Liping

    2015-01-01

    As a cost-effective solution to energy conservation, behavior based method focuses on changing people's behavior through normative feedback for energy efficiency. While the application of behavior-based method is promising, the challenge exists to achieve efficiently sustainable behavioral change. Based on multi-period observation of energy behavior at the Joint Base Andrews in Maryland, this paper presents a model-based approach aimed to improve the nationally popular and deep-seated benchmark setting strategy for normative feedback used in home energy reports. The improved approach has its merits of countering the undesirable boomerang effect and enhancing the effectiveness of normative feedback targeting different personalities. By introducing a modified opinion dynamics model, this paper simulates the process of energy behavior change and therefore identifies the driver and elementary rules of behavioral change. In particular, the paper defines various behavioral zones in accordance with people's personality and proposes a new customized energy reporting mechanism that maps normative benchmark to personality trait. The new energy reporting policy has strong industrial implication for promoting behavior-based method towards a sustained energy conservation movement. -- Highlights: •We explore the personality driving resident behavior change under peer pressure. •We map the distribution of behavior clusters driven by personality and benchmarks. •The model is tested using data from an experiment conducted in Maryland, U.S. •The population exposed to normative feedback can be divided into six categories. •A personality trait-based home energy reporting mechanism is proposed

  11. Non conventional energy sources and energy conservation

    International Nuclear Information System (INIS)

    Bueno M, F.

    1995-01-01

    Geographically speaking, Mexico is in an enviable position. Sun, water, biomass and geothermal fields main non conventional energy sources with commercial applications, are presents and in some cases plentiful in national territory. Moreover the coastal tidal power which is in research stage in several countries. Non conventional energy sources are an alternative which allow us to reduce the consumption of hydrocarbons or any other type of primary energetic, are not by oneself choices for the energy conservation, but energy replacements. At the beginning of this year, CONAE created the Direction of Non conventional Energy Sources, which main objective is to promote and impulse programs inclined towards the application of systems based in renewable energy sources. The research centers represent a technological and consultative support for the CONAE. They have an infrastructure developed along several years of continuous work. The non conventional energy sources will be a reality at the same time that their cost be equal or lower than the cost for the traditional generating systems. CONAE (National Commission for Energy Conservation). (Author)

  12. Psychological dimensions of Energy Conservation

    Directory of Open Access Journals (Sweden)

    Tonello, Graciela

    2012-12-01

    Full Text Available One of the most serious current environmental problems is the depletion of non renewable natural resources. The vast majority of our daily actions involve the consumption of energy and they increase the problem. Environmental psychology studies the psychological motivations that determine pro-ecological behaviour. In this context the aim of this review was to determine which psychological models and variables are better descriptors of residential energy conservation, comparing the predictive power of different models related to behaviour, residential consumption as well as to the acceptability of energy policies. Results suggest that energy saving is mainly linked to altruistic motivations, followed by egoistic reasons and in a minor way to environmental concerns. People would act according to these dimensions when contextual conditions are perceived as appropriate.

  13. Energy conservation in agriculture sector

    International Nuclear Information System (INIS)

    Maggo, J.N.

    1991-01-01

    The annual production of foodgrains in India rose from 50.8 million tonnes in 1950-51 to 178 million tonnes in 1989-90. One of the factors which led to this impressive growth is the continued increase in input of mechanization and energy in the agricultural sector by way of tractors running on diesel and pumps (for water supply) based on diesel and electricity. Electricity consumption in agricultural sector rose from 833 million kWh in 1960-61 to 47000 million kWh in 1990-91 and is further expected to rise to 81.8 TWH in 1999-2000. Considering the heavy investments required for production and supply of energy, it has become imperative to avoid wasteful use of energy and to use energy more efficiently. This can be done by : (1) Changing the electricity tariff structure from the present horse power related rates to energy consumption related rates. This will induce farmers to avoid waste in energy use. (2) Adopting energy efficiency measures. These measures are : (1) replacement of inefficient foot valves, suction pipes and delivery pipes of the pump sets, (2) increasing power factor of electric motors used for pumps sets, (3) reducing distribution losses over LT lines, and (4) optimizing use of fertilizers. This optimization will indirectly conserve energy by reducing electricity consumption by fertilizer industry. (M.G.B.). 5 refs., 4 tabs

  14. On energy conservation in extended magnetohydrodynamics

    International Nuclear Information System (INIS)

    Kimura, Keiji; Morrison, P. J.

    2014-01-01

    A systematic study of energy conservation for extended magnetohydrodynamic models that include Hall terms and electron inertia is performed. It is observed that commonly used models do not conserve energy in the ideal limit, i.e., when viscosity and resistivity are neglected. In particular, a term in the momentum equation that is often neglected is seen to be needed for conservation of energy

  15. Dark Energy from Violation of Energy Conservation.

    Science.gov (United States)

    Josset, Thibaut; Perez, Alejandro; Sudarsky, Daniel

    2017-01-13

    In this Letter, we consider the possibility of reconciling metric theories of gravitation with a violation of the conservation of energy-momentum. Under some circumstances, this can be achieved in the context of unimodular gravity, and it leads to the emergence of an effective cosmological constant in Einstein's equation. We specifically investigate two potential sources of energy nonconservation-nonunitary modifications of quantum mechanics and phenomenological models motivated by quantum gravity theories with spacetime discreteness at the Planck scale-and show that such locally negligible phenomena can nevertheless become relevant at the cosmological scale.

  16. Energy conservation-problems and perspectives for developing nations

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, P. R. [National Productivity Council, New Delhi, India; Padrmanabhan, S.

    1980-03-15

    While studies of the past indicated a tight coupling of energy consumption and GNP, longer range indications are that they can be mutually decoupled. Developing nations can move forward towards achieving significant energy savings in their economics without fear of economic stagnation. Conservation policies at the national level are difficult to enunciate and the implementation mechanisms have to be strengthened. Macro-level economics may not be easily apparent as unit level economics. If energy conservation is not practiced, we would require the development of additional energy supply capacity with all of its economic implications. The role of science and technology inputs in industrial processes for minimizing energy consumption is significant. Sufficient funds should be allocated for pursuance of R and D activities in energy conservation and in developing alternative energy resources to supplement and later replace the existing costly transient fuels. A climate to promote conservation of energy should formulate policies which lays emphasis on energy conservation strategies rather than soley on energy growth issues. The effort should be directed towards energy programs that are a judicious mix up of energy and energy conservation strategies for achieving economic growth and a reasonable standard of living commensurate with the aspirations of the people. In capital-scarce economies, an account of the fact that energy conservation requires far less investment than energy capital supplies, conservation policies must play a central role in the overall framework of developing nation's national energy policies.

  17. National Emission Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers; Guidance for Calculating Efficiency Credits Resulting from Implementation of Energy Conservation Measures

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Daryl [ORNL; Papar, Riyaz [Hudson Technologies; Wright, Dr. Anthony [ALW Consulting

    2013-02-01

    The purpose of this document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule (i.e., subpart DDDDD of CFR part 63). This document divides Boiler System conservation opportunities into four functional areas: 1) the boiler itself, 2) the condensate recovery system, 3) the distribution system, and 4) the end uses of the steam. This document provides technical information for documenting emissions credits proposed in the Implementation Plan for functional areas 2) though 4). This document does not include efficiency improvements related to the Boiler tune-ups.

  18. 10 CFR 435.4 - Energy efficiency performance standard.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy efficiency performance standard. 435.4 Section 435.4 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR NEW FEDERAL LOW-RISE RESIDENTIAL BUILDINGS Mandatory Energy Efficiency Standards for Federal Low-Rise Residential...

  19. Energy conservation policy in China

    Energy Technology Data Exchange (ETDEWEB)

    Haugland, T; Roland, K [ECON-Centre for Economic Analysis, Oslo (NO)

    1992-02-01

    Energy market developments and the state of the environment will be decisive for economic growth and modernization of Chinese society. Lack of adequate energy supplies could in the future seriously impair the growth potential of the economy, as it has partly done during the 1980s. Environmental damage creates major health problems for the population and hamper the productive capacity of Chinese agriculture and industry. One obvious and effective measure to meet these challenges is a policy that pursues more efficient use of energy supplies. China achieved impressive results in energy efficiency improvements during the 1980s, largely on the back of the cheapest and most obvious conservation opportunities. These are now exhausted. Further improvements will require stronger measures. It is difficult to see how the current rate of economic growth (above 6 per cent) and energy efficiency improvements can be sustained without comprehensive market reforms. Economic growth and development is however, in Chinese policy, subordinate to political stability and continuity. The disruption of the political and economic reform processes in 1988-9 was largely motivated by a perceived fear of political instability and disintegration of the state. Thus, there may exist some degree of conflict between the objective of strong economic growth and the existing 'social order and stability'. To balance the potential conflict inherent in this development process is the big challenge facing Chinese society for the coming decades. (author).

  20. Energy conservation at the Nippon Steel Corporation

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, Shigetoshi

    1979-07-01

    Characteristics of the Japanese energy demand-supply structure are discussed. Nippon Steel's energy consumption and energy conservation measures are discussed. Results of Nippon's energy conservation activities are summarized. Additional information on the Japanese short-range measures for the reduction in oil consumption, the effect of efforts for the reduction of petroleum consumption, and concrete measures for securing the effect is included.

  1. Energy conservation prospects through electric load management

    Energy Technology Data Exchange (ETDEWEB)

    El-Shirbeeny, E H.T.

    1984-04-01

    In this paper, concepts of electric load management are discussed for effective energy conservation. It is shown that the conservation program must be comprehensive to provide solutions to the problems facing the electric consumer, the electric utility and the society by reducing the rate of growth of energy consumption and power system peak demand requirements. The impact of energy management programs on electric energy conservation is examined, with emphasis on efficiency, storage, cogeneration and controls with computers.

  2. 18 CFR 806.25 - Water conservation standards.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 2 2010-04-01 2010-04-01 false Water conservation standards. 806.25 Section 806.25 Conservation of Power and Water Resources SUSQUEHANNA RIVER BASIN COMMISSION REVIEW AND APPROVAL OF PROJECTS Standards for Review and Approval § 806.25 Water conservation...

  3. Interference and the Law of Energy Conservation

    Science.gov (United States)

    Drosd, Robert; Minkin, Leonid; Shapovalov, Alexander S.

    2014-01-01

    Introductory physics textbooks consider interference to be a process of redistribution of energy from the wave sources in the surrounding space resulting in constructive and destructive interferences. As one can expect, the total energy flux is conserved. However, one case of apparent non-conservation energy attracts great attention. Imagine that…

  4. 10 CFR 433.4 - Energy efficiency performance standard.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy efficiency performance standard. 433.4 Section 433.4 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS FOR THE DESIGN AND... consumption level at or better than the maximum level of energy efficiency that is life-cycle cost-effective...

  5. Grant request: to implement energy conservation measures as part of the state original and supplemental energy conservation plans

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-16

    The program measures described in this document comprise a grant request to DOE under the Energy Policy and Conservation Act of 1975 and the Energy Conservation and Production Act of 1976. The amount requested, $5,555,000, will allow the extension, acceleration, and implementation of energy conservation activities already in progress in California. Accomplishments to date have included the adoption of residential standards, and the implementation of an energy survey program for public buildings. Efficiency standards have been established for refrigerators and room and central air conditioners, appliances which utilize a significant amount of residential energy. Before the end of 1977, efficiency standards will be established for clothes dryers, washers, and water heaters. Program elements are: technical/financial assistance; public awareness; standards setting; solar element; research/analysis/evaluation; and coordination and management.

  6. Training program for energy conservation in new-building construction. Volume II. Energy conservation technology: for the building inspector

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This training manual contains the basic information necessary to acquaint the field building inspector with the concepts of energy conservation in buildings and instructs him in the basic techniques of field inspection of energy compliance.

  7. Promoting energy conservation in China's metallurgy industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Du, Zhili

    2017-01-01

    China is undergoing rapid industrialization and urbanization, with consequent dramatic increase in energy demand. Given energy scarcity, environmental pollution, energy security and energy cost constraints, energy conservation will be the major strategy in China's transition to a low-carbon economy. Since the metallurgy industry is a main sector of energy consumption, the efficiency of energy conservation in this industry will affect the future prospects of energy savings. This paper analyzes the energy conservation potential of China's metallurgy industry. First, seemingly unrelated regression method is applied to investigate the relationship between energy relative price, R&D input, enterprise ownership structure, enterprise scale and energy intensity of the metallurgy industry. Then, based on the SUR results, we use the scenario analysis method to predict energy consumption and savings potential in the industry in different scenarios. This paper provides references for China's government and metallurgy industry in formulating relevant energy conservation policies. - Highlights: • Seemingly unrelated regression method is applied to analyze the energy intensity of metallurgy industry. • We use the scenario analysis method to predict energy consuming and energy saving of Chinese metallurgy industry. • Provide references for China's government and metallurgy industry in formulating relevant energy conservation policies.

  8. Illinois energy conservation plan report: 1979 revision

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-02-01

    In response to Energy Policy and this Conservation Act (PL 94-163) and Energy Conservation and Production Act (PL 94-385), this paper describes the activities to be undertaken by Illinois to meet the mandatory requirements of the Acts and to carry out other activities to encourage energy conservation by energy-consuming sectors in the state. Programs reach the residential, commercial/industrial, agricultural, educational, transportation, and government sectors. The overall goal of the program is to reduce projected energy consumption in 1980 by 5% through information and educational activities.

  9. Energy conservation employing membrane-based technology

    International Nuclear Information System (INIS)

    Narayanan, C.M.

    1993-01-01

    Membranes based processes, if properly adapted to industrial processes have good potential with regard to optimisation and economisation of energy consumption. The specific benefits of MBT (membrane based technology) as an energy conservation methodology are highlighted. (author). 6 refs

  10. Nature conservation guidelines for renewable energy projects

    International Nuclear Information System (INIS)

    1994-01-01

    English Nature commissions this report in order to identify the likely nature conservation implications of renewable energy developments and for wind farm proposals in particular, to give guidance on siting criteria to minimise the nature conservation impact. The report is intended to be of use to developers, local planning authority staff and other interested parties in considering a renewable energy project. In consequence, the report concentrates on planning and nature conservation matters and outlines technical issues where relevant. (UK)

  11. Conservation as an alternative energy source

    Science.gov (United States)

    Allen, D. E.

    1978-01-01

    A speech is given outlining the energy situation in the United States. It is warned that the existing energy situation cannot prevail and the time is fast running out for continued growth or even maintenance of present levels. Energy conservation measures are given as an aid to decrease U.S. energy consumption, which would allow more time to develop alternative sources of energy.

  12. Energy conservation potential of surface modification technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le, H.K.; Horne, D.M.; Silberglitt, R.S.

    1985-09-01

    This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

  13. Workplace Energy Conservation at Michigan State University

    Science.gov (United States)

    Allen, Summer; Marquart-Pyatt, Sandra T.

    2018-01-01

    Purpose: This research contributes to the literature on workplace energy conservation by examining the predictors of individual employee behaviors and policy support in a university. The purpose of this research is to better understand what factors influence energy conservation behaviors in this setting to inform programs and interventions.…

  14. Towards a more conservative energy policy

    International Nuclear Information System (INIS)

    Forman, N.

    1977-01-01

    The subject is treated under the following headings: the meaning of energy policy; previous attempts to formulate United Kingdom energy policy; patterns of energy supply and demand (in the UK) (current and future); towards a more conservative energy policy (the use of energy in the various sectors, the conversion and distribution of energy (coal, nuclear power, electricity, oil and gas, renewable sources)); energy policy in broader perspective (international context, cost benefit assessments, contrasting patterns of energy use, ethical issues). (U.K.)

  15. Indian energy conservation- status and strategies

    International Nuclear Information System (INIS)

    Dharmalingam, P.

    1996-01-01

    High rates of inflation combined with social justice against a backdrop of ever increasing population- this is a challenge which the Government of India is facing today. It is evident that the annual growth rate of 5.6% as envisaged for the VIIIth five year plan can never be met unless conscious efforts are made to augment energy supplies by energy demand management through energy conservation. In this context, a review of the energy consuming sectors in terms of their consumption trends, energy efficiencies or intensities, energy conservation opportunities, technologies used and energy investment programmes would prove useful and informative. (author). 10 tabs

  16. Energy conservation: its planning and management

    International Nuclear Information System (INIS)

    Nanda, K.S.; Patra, K.C.

    1995-01-01

    Energy conservation, its planning and management and the development of renewable energy systems of proven design are very worthy challenges for all. Energy education at various levels is most important particularly in the development of renewable energy technology. 2 refs., 3 tabs

  17. Reduced energy conservation law for magnetized plasma

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Decyk, V.K.

    1994-01-01

    A global energy conservation law for a magnetized plasma is studied within the context of a quasiparticle description. A reduced energy conservation law is derived for low-frequency, as compared to the gyromagnetic frequency, plasma motions with regard to both non-uniform mean flows and fluctuations in the plasma. The mean value of plasma energy is calculated and sufficient stability conditions for non-equilibrium plasmas are derived. (orig.)

  18. Estimating energy conservation patterns of Greek households

    International Nuclear Information System (INIS)

    Sardianou, Eleni

    2007-01-01

    This paper develops an empirical model to investigate the main determinants of household energy conservation patterns in Greece employing cross-section data. In the empirical analysis, household energy-conserving choices models are employed, using a discrete and a latent trait variable respectively as a dependent variable. The results show that socio-economic variables such as consumers' income and family size are suitable to explain differences towards energy conservation preferences. In addition, the results suggest that electricity expenditures and age of the respondent are negatively associated with the number of energy-conserving actions that a consumer is willing to adopt. Finally, other variables such as environmental information feedback and consciousness of energy problems are characteristics of the energy-saver consumer. By evaluating consumer's decision-making process with regards to energy conservation measures, we are able to formulate and propose an effective energy conservation framework for Greece. An energy policy framework is among the main prerequisites not only to achieve sustainable development but also to maintain consumers' quality of life

  19. Energy informatics: Fundamentals and standardization

    Directory of Open Access Journals (Sweden)

    Biyao Huang

    2017-06-01

    Full Text Available Based on international standardization and power utility practices, this paper presents a preliminary and systematic study on the field of energy informatics and analyzes boundary expansion of information and energy system, and the convergence of energy system and ICT. A comprehensive introduction of the fundamentals and standardization of energy informatics is provided, and several key open issues are identified.

  20. On Some Aspects of Energy Conservation in Industries

    Science.gov (United States)

    Rai, Keerti; Seksena, S. B. L.; Thakur, A. N.

    2016-06-01

    Energy demand has increased continuously due to advancement in technology and living standards of a large section of people resulting in a wide gap between supply and demand. One of the approaches to reduce this gap would be the adoption of measures of energy conservation in general and the efficient use of energy particularly in motor. This paper presents a review of the research activity in the field of efficiency optimization of three-phase induction motor drive. The approach is analyzed and the better option of energy conservation are identified.

  1. Italian energy conservation laws: Implementation problems

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Italian energy conservation Law No. 9 was designed to reduce Italy's worrisome 82% dependency on foreign energy supplies by encouraging the development and use of renewable energy sources, fuel diversification and auto-production/cogeneration by private industry. Law No. 10 was intended to promote energy conservation initiatives especially with regard to the efficient use of energy for space heating in public buildings. Both of these legal incentives have encountered great difficulties in implementation due to the inability of the Government to provide the necessary timely and sufficient start-up funds, as well as, due to the excessive bureaucratism that was built into the administrative procedures

  2. US National energy policy: conservation and environment

    International Nuclear Information System (INIS)

    Michna, J.; Bednarz, L.M.

    2004-01-01

    The paper presents extracts from an extended review devoted to recent changes and current trends in the national energy policy pursued in the USA. In 2001 the President Bush proposed an energy strategy for the period to 2025 that would promote energy conservation, repair and expand energy infrastructure, and increase energy supply while protecting the environment. The material stresses the importance of a sound national energy policy addressing supply, energy distribution and conservation. Well - illustrated data are given on the energy production and consumption (total, per capita, per $, by category, by fuel, etc.) and on the emissions (by sector, by fuel, by region, etc.). Giving an accurate account of the current situation with energy in America and a vision of its development for the first quarter of our century, these data are helpful for analyzing the national energy policies in other countries, post - transitional included. (authors)

  3. Analysis of alternative strategies for energy conservation in new buildings

    Science.gov (United States)

    Fang, J. M.; Tawil, J.

    1980-12-01

    The policy instruments considered include: greater reliance on market forces; research and development; information, education and demonstration programs; tax incentives and sanctions; mortgage and finance programs; and regulations and standards. The analysis starts with an explanation of the barriers to energy conservation in the residential and commercial sectors. Individual policy instruments are described and evaluated with respect to energy conservation, economic efficiency, equity, political impacts, and implementation and other transitional impacts. Five possible strategies are identified: (1) increased reliance on the market place; (2) energy consumption tax and supply subsidies; (3) Building Energy Performance Standards (BEPS) with no sanctions and no incentives; (4) BEPS with sanctions and incentives (price control); and (5) BEPS with sanctions and incentives (no price controls). A comparative analysis is performed. Elements are proposed for inclusion in a comprehensive strategy for conservation in new buildings.

  4. Principles of the Energy Conservation Bill

    International Nuclear Information System (INIS)

    Zeman, J.

    1995-01-01

    The paper describes 21 principles of the draft Energy Conservation Bill. The principles lay down fundamental responsibilities of the government, the municipalities, business entities, citizens and power plants in the field of economical energy management. Included are principles to minimize energy consumption and to stimulate a reasonable energy management, the role of the energy distribution network, responsibilities of the central load dispatching center, and power plant output regulation schemes. (J.B.)

  5. Profit by conserving energy in your restaurant

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This manual is aimed at the Canadian restaurant sector with a view of promoting sound energy conservation practices. Monitoring is recommended to identify energy consumption and measure results of a conservation effects. These efforts can be done with respect to selection, operation, and maintenance of restaurant equipment used in food preparation, HVAC systems, refrigeration, water heating, and lighting. Overall building design and planning of new installations are also considered. 27 figs.

  6. Energy conservation in India: a profile

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The decade and half since the oil crisis of 1973 has been a period that has witnessed a steady growth of the energy conservation ethos in India. Housekeeping and low risk conservation options have been largely preferred so far. The IMWG (Inter-Ministerial Working Group on Utilization and Conservation of Energy) study did not evaluate potential saving through the introduction of high risk and high pay-off technologies. The potential for energy conservation in India is substantial. However, some of the barriers to achieving the potential in the past have been energy prices which deviate from rational tariffs and prices, a lack of information on specific measures and of options for achieving energy conservation, paucity of capital for schemes requiring technology upgradation and efficiency improvements, and the inadequacy if institutional arrangement for promoting energy conservation in different sectors of the economy. Recent efforts pursued by several organizations however provide some basis for optimism. Given the growing capital intensity of the energy sector in India, more vigorous efforts are likely to be made in the future. In particular, success stories in some industrial units indicate that decentralized efforts by the units themselves can achieve a great deal in improving the efficiency of energy use, particularly in the Indian industry. Policies to promote such programmes would help accelerate energy conservation efforts in industrial units and in other sectors. It is therefore hoped that the intensity of energy use in several sectors of the indian economy will be reduced significantly in the coming years. (author). 3 refs., 3 tabs

  7. Energy consumption and conservation, evaluation

    International Nuclear Information System (INIS)

    Acket, C.

    2006-04-01

    The energy consumption is increasing of more than 1% each year. It is necessary to slow down this growth and much better to inverse it. Observing the main consumption posts, energy saving is possible at short dated for the residential sector and medium and long dated for the transports and the industry. Anyway the individual behaviors are essential. The author presents the situation for each posts, providing data on the energy consumption and saving and recommendations. (A.L.B.)

  8. 77 FR 76959 - Energy Conservation Program: Request for Exclusion of 100 Watt R20 Short Incandescent Reflector...

    Science.gov (United States)

    2012-12-31

    ... subject to energy conservation standards, the manufacturers removed the product from the market... Conservation Program: Request for Exclusion of 100 Watt R20 Short Incandescent Reflector Lamp From Energy Conservation Standards AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  9. 75 FR 52892 - Energy Conservation Program for Consumer Products: Test Procedures for Residential Water Heaters...

    Science.gov (United States)

    2010-08-30

    ... ``Energy Conservation Program for Consumer Products Other Than Automobiles,'' including residential water... final rule revising energy conservation standards for residential water heaters, direct heating.... EERE-2009-BT-TP-0013] RIN 1904-AB95 Energy Conservation Program for Consumer Products: Test Procedures...

  10. Background to the development process, Automated Residential Energy Standard (ARES) in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-09-01

    This report documents the development and testing of a set of recommendations generated to serve as a primary basis for the Congressionally-mandated residential standard. This report treats only the residential building recommendations.

  11. Analysis of sectoral energy conservation in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Mofleh, Anwar; Taib, Soib; Salah, Wael [School of Electrical and Electronics Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia); Mujeebu, M. Abdul [School of Mechanical Engineering, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

    2009-06-15

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors. (author)

  12. Analysis of sectoral energy conservation in Malaysia

    International Nuclear Information System (INIS)

    Al-Mofleh, Anwar; Taib, Soib; Mujeebu, M. Abdul; Salah, Wael

    2009-01-01

    The electrical energy consumption in Malaysia has increased sharply in the past few years, and modern energy efficient technologies are desperately needed for the national energy policy. This article presents a comprehensive picture of the current status of energy consumption and various energy conservation options viable for Malaysian environment. A detailed survey is made to assess the consumption pattern and the existing techniques for energy efficiency. Based on the survey, the feasibility of improving the available systems and adopting new programs in different sectors is investigated. The study reveals the fact that the energy conservation policy of the country has been fairly improved in the last ten years. However the country has to pay more attention to this area and make urgent measures to adopt more energy efficient technologies in various sectors.

  13. Energy savings potential from energy-conserving irrigation systems

    Energy Technology Data Exchange (ETDEWEB)

    Wilfert, G.L.; Patton, W.P.; Harrer, B.J.; Clark, M.A.

    1982-11-01

    This report systematically compares, within a consistent framework, the technical and economic characteristics of energy-conserving irrigation systems with those of conventional irrigation systems and to determine total energy savings. Levelized annual costs of owning and operating both energy-conserving and conventional irrigation systems have been developed and compared for all 17 states to account for the differences in energy costs and irrigation conditions in each state. Market penetration of energy-conserving systems is assessed for those systems having lower levelized annual costs than conventional systems performing the same function. Annual energy savings were computed by matching the energy savings per system with an assumed maximum market penetration of 100 percent in those markets where the levelized annual costs of energy-conserving systems are lower than the levelized annual costs of conventional systems.

  14. Labor and energy impacts of energy-conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Three papers are presented discussing the labor and energy impacts of energy-conservation measures, namely: Generation of the Industry/Occupation Wage Matrix and Related Matters, by Carole Green; Job Shifts from Energy Conservation (Salary Distribution Effects), by Robert A. Herendeen; and Energy and Labor Implication of Improving Thermal Integrity of New Houses, by John Joseph Nangle. A separate abstract was prepared for each paper.

  15. Energy conserving dehumidification of greenhouses

    NARCIS (Netherlands)

    Zwart, de H.F.

    2014-01-01

    As greenhouses become better insulated and increasingly airtight, the humidity of the inside air rises easily and may become unfavourably high. Therefore, most greenhouses frequently open their vents to remove the moisture excess. When heated, opening the vents will increase the energy consumption.

  16. Motivated creativity: A conservation of energy approach

    NARCIS (Netherlands)

    Roskes, M.

    2013-01-01

    This dissertation developed a novel conservation of energy principle to explain how approach and avoidance motivation influence performance. On the one hand, we showed that avoidance motivated people can excel when they are sufficiently stimulated to invest their energy and cognitive resources. This

  17. International energy conservation: comparative law and policy

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-01

    Ernest C. Baynard III, in the Foreword to the conference, told of the purpose of the conference - to compare and discuss the policies and laws that highly industrialized nations have used and considered to meet the challenge of energy conservation. The following countries participated in the conference: U.K.; Australia; Federal Republic of Germany; Japan; France; Canada; Sweden; Italy; the Netherlands; and the U.S. The IEA and the Commission of the European Communities also participated. The conference format consisted of ministerial addresses to the conference, interspersed with panel discussions focusing on energy conservation in transportation, industry, agriculture, and utilities; residential, commercial, and industrial buildings; and emergency situations. There was also a panel discussion on the role of government in energy conservation and energy information collection. The panels were composed of participating countries' representatives. (MCW)

  18. Exploration of energy conservation opportunities through energy audit

    International Nuclear Information System (INIS)

    Swain, R.K.; Swain, A.K.; Subudhi, B.

    1994-01-01

    Developing countries like India, has to cater the imbalance of energy between the supply and demand in almost all the sectors, so as to devise energy conservation strategies. Electricity is one of the most convenient form of energy gifted to the mankind. The raising cost of electricity and the need to raise large resources to meet the required demand is only at the most of other important assets of the country. This gap between demand and supply can be partially met by appropriate energy conservation schemes through energy audit- a scientific approach for balancing the supply and demand. India has to go a long way ahead in it, therefore, energy audit has been initiated at vulnerable energy consuming places. This paper presents the effectiveness of energy audit strategy in achieving energy conservation. The energy audit of Shrama Shakti Bhavan, an office complex at New Delhi, has been taken as a case study for this work. (author). 2 refs., 12 tabs

  19. Exploration of energy conservation opportunities through energy audit

    International Nuclear Information System (INIS)

    Swain, R.K.; Swain, A.K.; Subudhi, B.

    1995-01-01

    Developing countries like India, has to cater to the imbalance of energy between the supply and demand in almost all the sectors, so as to devise energy conservation strategies. Electricity is one of the most convenient form of energy gifted to the mankind. The raising cost of electricity and the need to raise large resources to meet the required demand is only at the cost of other important assets of the country. This gap between demand and supply can be partially met by appropriate energy conservation schemes through energy audit- a scientific approach for balancing the supply and demand. India has to go a long way ahead in it, therefore, energy audit has been initiated at vulnerable energy consuming places. This paper presents the effectiveness of energy audit strategy in achieving energy conservation. The energy audit of Shrama Shakti Bhavan, an office complex at New Delhi, has been taken as a case study. (author). 2 refs., 12 tabs

  20. Energy conservation. Federal shared energy savings contracting

    International Nuclear Information System (INIS)

    Fultz, Keith O.; Milans, Flora H.; Kirk, Roy J.; Welker, Robert A.; Sparling, William J.; Butler, Sharon E.; Irwin, Susan W.

    1989-04-01

    A number of impediments have discouraged federal agencies from using shared energy savings contracts. As of November 30, 1988, only two federal agencies - the U.S. Postal Service (USPS) and the Department of the Army -had awarded such contracts even though they can yield significant energy and cost savings. The three major impediments we identified were uncertainty about the applicability of a particular procurement policy and practice, lack of management incentives, and difficulty in measuring energy and cost savings. To address the first impediment, the Department of Energy (DOE) developed a manual on shared energy savings contracting. The second impediment was addressed when the 100th Congress authorized incentives for federal agencies to enter into shared savings contracts. DOE addressed the third impediment by developing a methodology for calculating energy consumption and cost savings. However, because of differing methodological preferences, this issue will need to be addressed on a contract-by-contract basis. Some state governments and private sector firms are using performance contracts to reduce energy costs in their buildings and facilities. We were able to identify six states that were using performance contracts. Five have established programs, and all six states have projects under contract. The seven energy service companies we contacted indicated interest in federal shared energy savings contracting

  1. Energy prices and the promotion of energy conservation. A background study for energy conservation programme

    International Nuclear Information System (INIS)

    1994-01-01

    The prices of fuels in the international markets affect the development of consumer prices of energy in Finland. In the near future no factors can be foreseen, which would cause major increases in the prices of oil, coal or gas. It can thus not be expected that increased fuel prices would motivate more efficient energy conservation. In international comparison, consumer prices of energy have been relatively low in Finland. This applies especially to electricity. After the removal of price controls, energy prices have been determined by the markets. The influence of the public authorities in energy pricing is put into effect through taxation. The price of energy has a fairly small effect on energy consumption in a short term, but longer term effects are more significant. Energy products are faxed in all western countries. (orig.)

  2. Energy Conservation: Heating Navy Hangars

    Science.gov (United States)

    1984-07-01

    temperature, IF Tf Inside air temperature 1 foot above the floor, OF T. Inside design temperature, IF To Hot water temperature setpoint , OF TON Chiller ...systems capable of optimizing energy usage base-wide. An add-on to an existing large scale EMCS is probably the first preference, followed by single...the building comfort conditions are met during hours of building occupancy. 2. Optimized Start/Stop turns on equipment at the latest possible time and

  3. Energy conservation in electric distribution

    International Nuclear Information System (INIS)

    Lee, Chong-Jin.

    1994-01-01

    This paper discusses the potential for energy and power savings that exist in electric power delivery systems. These savings translate into significant financial and environmental benefits for electricity producers and consumers as well as for society in general. AlliedSignal's knowledge and perspectives on this topic are the result of discussions with hundreds of utility executives, government officials and other industry experts over the past decade in conjunction with marketing our Amorphous Metal technology for electric distribution transformers. Amorphous metal is a technology developed by AlliedSignal that significantly reduces the energy lost in electric distribution transformers at an incremental cost of just a few cents per kilo-Watt-hour. The purpose of this paper is to discuss: Amorphous Metal Alloy Technology; Energy Savings Opportunity; The Industrial Barriers and Remedies; Worldwide Demand; and A Low Risk Strategy. I wish this presentation will help KEPCO achieve their stated aims of ensuring sound development of the national economy and enhancement of public life through the economic and stable supply of electric power. AlliedSignal Korea Ltd. in conjunction with AlliedSignal Amorphous Metals in the U.S. are here to work with KEPCO, transformer manufacturers, industry, and government agencies to achieve greater efficiency in power distribution

  4. Consumer energy conservation policy. An analytical approach

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.

    1984-06-01

    To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programmes. The result of this analytical approach to conservation policy - economic stability and economic security - are goals well worth pursuing.

  5. Calorimeter energy calibration using the energy conservation law

    Indian Academy of Sciences (India)

    A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution ...

  6. Canada's voluntary industrial energy conservation programme

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Jr., C. A.

    1979-07-01

    The organization of the voluntary industrial energy conservation program is described. There are 15 industrial sectors in the program and the plan implemented by the sectors including individual companies, trade associations, industry task forces, task force coordinating committee, and government is described. Targets for attack are mainly housekeeping projects, energy efficiency in retrofitting, and new processes. Problems are identified. It is concluded that compiled total performance has essentially achieved its target of 12% improved energy efficiency two years ahead of schedule. (MCW)

  7. Energy conservation from a consumer perspective. Institut fuer marketing der Universitaet Muenster, Arbeitspapiere

    Energy Technology Data Exchange (ETDEWEB)

    Katz, R

    1980-01-01

    A survey of the standard of energy research in the American Literature on consumer behaviour is given. After the discussion of the importance of consumer research for energy conservation the difficulties on determining ''energy conservation behaviour'' are described. Moreover, the study compiles past American Literature that has tried to explain energy conservation behaviour. A further chapter analyzes measures of influencing the consumer energy conservation behaviour carried out so far in the United States and Canada. Finally, still open problems in future American energy conservation research in the field of consumer behaviour are demonstrated.

  8. Overview of energy-conservation research opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Hopp, W.J.; Hauser, S.G.; Hane, G.J.; Gurwell, W.E.; Bird, S.P.; Cliff, W.C.; Williford, R.E.; Williams, T.A.; Ashton, W.B.

    1981-12-01

    This document is a study of research opportunities that are important to developing advanced technologies for efficient energy use. The study's purpose is to describe a wide array of attractive technical areas from which specific research and development programs could be implemented. Research areas are presented for potential application in each of the major end-use sectors. The study develops and applies a systematic approach to identifying and screening applied energy conservation research opportunities. To broadly cover the energy end-use sectors, this study develops useful information relating to the areas where federally-funded applied research will most likely play an important role in promoting energy conservation. This study is not designed to produce a detailed agenda of specific recommended research activities. The general information presented allows uniform comparisons of disparate research areas and as such provides the basis for formulating a cost-effective, comprehensive federal-applied energy conservation research strategy. Chapter 2 discusses the various methodologies that have been used in the past to identify research opportunities and details the approach used here. In Chapters 3, 4, and 5 the methodology is applied to the buildings, transportation, and industrial end-use sectors and the opportunities for applied research in these sectors are discussed.Chapter 6 synthesizes the results of the previous three chapters to give a comprehensive picture of applied energy conservation research opportunities across all end-use sectors and presents the conclusions to the report.

  9. Organizational determinants of energy-conservation management

    Energy Technology Data Exchange (ETDEWEB)

    Selmer, J. (Hong Kong Baptist Coll., Kowloon (Hong Kong). Dept. of Management)

    1994-10-01

    Energy-conservation activities require new functional and technical activities in all participating organizations and the prospects of effectively managing such activities are contingent upon the specific organizational setting. Based on a previous large-scale investigation in which we identified five organizational archetypes, in-depth longitudinal case studies were undertaken of five organizations in Sweden during 5 years, each organization representing a different archetype. The five organizations have distinct organizational prerequisites and separate basic motivations to engage and succeed in energy-conservation management. Implications for government policy and managerial action are discussed in detail. (author)

  10. Focus on energy conservation: a project list

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    The Urban Land Institute (ULI) has prepared the following list of outstanding energy conserving projects for the US Department of Energy. As requested by the Department, the list includes descriptions of land developments and individual buildings suggested by members of ULI and by other sources. The projects have been selected to exemplify the major energy saving techniques in use today, with emphasis on those strategies most significant for people engaged in the business of land development. To make the list a useful reference for developers and public officials, ULI has attempted to cover energy conservation in the broadest sense from overall site planning to the functioning of individual building components. Focusing too closely on the myriad types of hardware available has been avoided and examples of the basic considerations important to energy-conscious planning and design are provided. Details on some heating, ventilation and air conditioning systems are provided in order to acquaint readers with major innovations in the field.

  11. Training program for energy conservation in new building construction. Volume III. Energy conservation technology for plan examiners and code administrators. Energy Conservation Technology Series 200

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    Under the sponsorship of the United States Department of Energy, a Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. The subject of regulation of new building construction to assure energy conservation is recognized as one in which code officials have not had previous exposure. It was also determined that application of the model code would be made at varying levels by officials with both a specific requirement for knowledge and a differing degree of prior training in the state-of-the-art. Therefore, a training program and instructional materials were developed for code officials to assist them in the implementation and enforcement of energy efficient standards and codes. The training program for Energy Conservation Tehnology for Plan Examiners and Code Administrators (ECT Series 200) is presented.

  12. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    International Nuclear Information System (INIS)

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage

  13. Proceedings of the second US Department of Energy environmental control symposium. Volume 2. Nuclear energy, conservation, and solar energy

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    These proceedings document the presentations given at the Second Environmental Control Symposium. Symposium presentations highlighted environmental control activities which span the entire DOE. Volume II contains papers relating to: environmental control aspects of nuclear energy use and development; nuclear waste management; renewable energy sources; transportation and building conservation (fuel economy, gasohol, building standards, and industry); and geothermal energy, power transmission, and energy storage. (DMC)

  14. A Compendium of Energy Conservation Success Stories

    Science.gov (United States)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

  15. A compendium of energy conservation success stories

    Energy Technology Data Exchange (ETDEWEB)

    1988-09-01

    Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office/endash/Energy Utilization Research/endash/sponsors research and technical inventions for all end-use sectors.

  16. Energy conservation through thermally insulated structures

    International Nuclear Information System (INIS)

    Abu-Dayyeh, Ayoub

    2006-01-01

    The propose of this paper is to explicate its title through investigating the different available thermal insulating materials and the various techniques of application, as practiced in Jordan, in particular, and as practiced in many parts of the world in general, which will satisfy Jordanian standards in terms of heat transmittance and thermal comfort. A brief comparison with international standards will shed some light on the stringent measures enforced in the developed world and on our striving aspirations to keep pace. The paper consists of four main parts, pseudoally divided. The first part will deal with the mechanism of heat loss and heat gain in structures during summer and winter. It will also explain the Time-lag phenomenon which is vital for providing thermal comfort inside the dwellings. The second part will evaluate the damages induced by the temperature gradients on the different elements of the structure, particularly next to exterior opening. The paper will also demonstrate the damages induced by water condensation and fungus growth on the internal surfaces of the structure and within its skeleton. A correlation between condensation and thermal insulation will be established. The third part of the paper will evaluate the different available thermal insulating materials and the application techniques which will satisfy the needs for thermal insulating and thermal comfort at the least cost possible. The criteria of an economical design shall be established. As a conclusion, the paper infers answers to the following different criteria discussed throughout the different parts of the paper. The main theme of questions can be summarized as follows: 1)How energy conservation is possible due to thermal insulation? 2)The feasibility of investing in thermal insulation? 3)Is thermal comfort and a healthy atmosphere possible inside the dwellings during all season! What are the conditions necessary to sustain them? 4)What environmental impacts can exist due to

  17. Energy production, conversion, storage, conservation, and coupling

    CERN Document Server

    Demirel, Yaşar

    2012-01-01

    Understanding the sustainable use of energy in various processes is an integral part of engineering and scientific studies, which rely on a sound knowledge of energy systems. Whilst many institutions now offer degrees in energy-related programs, a comprehensive textbook, which introduces and explains sustainable energy systems and can be used across engineering and scientific fields, has been lacking. Energy: Production, Conversion, Storage, Conservation, and Coupling provides the reader with a practical understanding of these five main topic areas of energy including 130 examples and over 600 practice problems. Each chapter contains a range of supporting figures, tables, thermodynamic diagrams and charts, while the Appendix supplies the reader with all the necessary data including the steam tables. This new textbook presents a clear introduction of basic vocabulary, properties, forms, sources, and balances of energy before advancing to the main topic areas of: • Energy production and conversion in importa...

  18. Energy conservation indicators. 1982 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Belzer, D.B.

    1982-09-01

    A series of Energy Conservation Indicators were developed for the Department of Energy to assist in the evaluation of current and proposed conservation strategies. As descriptive statistics that signify current conditions and trends related to efficiency of energy use, indicators provide a way of measuring, monitoring, or inferring actual responses by consumers in markets for energy services. Related sets of indicators are presented in some 40 one-page indicator summaries. Indicators are shown graphically, followed by several paragraphs that explain their derivation and highlight key findings. Indicators are classified according to broad end-use sectors: Aggregate (economy), Residential, Commercial, Industrial, Transportation and Electric Utilities. In most cases annual time series information is presented covering the period 1960 through 1981.

  19. Avoidance Motivation and Conservation of Energy

    NARCIS (Netherlands)

    Roskes, Marieke; Elliot, Andrew J.; Nijstad, Bernard A.; De Dreu, Carsten K. W.

    Compared to approach motivation, avoidance motivation evokes vigilance, attention to detail, systematic information processing, and the recruitment of cognitive resources. From a conservation of energy perspective it follows that people would be reluctant to engage in the kind of effortful cognitive

  20. Avoidance motivation and conservation of energy

    NARCIS (Netherlands)

    Roskes, Marieke; Elliot, Andrew J.; Nijstad, Bernard A.; De Dreu, Carsten K W

    Compared to approach motivation, avoidance motivation evokes vigilance, attention to detail, systematic information processing, and the recruitment of cognitive resources. From a conservation of energy perspective it follows that people would be reluctant to engage in the kind of effortful cognitive

  1. French industry and the energy conservation challenge

    Energy Technology Data Exchange (ETDEWEB)

    Serpette, M.

    1979-07-01

    The general position of France and its energy conservation objectives; the action taken by the government to stimulate this policy; and government cooperation with industrial circles and the action of industry itself are discussed. It is observed that the potential for future energy savings are smaller in France than in other countries because consumptions are already down to minimal levels. Consumption patterns in France are illustrated. (MCW)

  2. Motivation: its role in energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J. E.; Kingsley, K. J.

    1979-07-01

    The program at International Kaiser Aluminum and Chemical Corporation to motivate people by emphasizing the importance of the individual to save energy is described. Three major areas of conservation in the industry considered important since they identify the different motivational approaches needed that are discussed are manufacture, recycling, and by conversion to energy saving products. The importance of communication, participation, and recognition are emphasized. (MCW)

  3. Selecting appropriate energy efficiency indicators for the Thai Energy Conservation Promotion Programme. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Eichhammer, W.; Gruber, E.; Cremer, C.

    2000-06-01

    In 1992 the Thai Government passed the Energy Conservation Promotion (ECP) Act to improve energy efficiency in Thai industry and commerce. The Thai-German Energy Efficiency Promotion Project (ENEP) is supporting the Department of Energy Development and Promotion (DEDP) in its effort to implement the Energy Conservation Program for large buildings and designated factories. About 4000 buildings and factories under the Compulsory Program, have to report every 6 months their energy consumption data to DEDP. Every 3 years energy audits have to be conducted by registered energy consultants, to identify energy saving opportunities, to set saving targets and to recommend energy conservation measures. Investments in energy efficient technologies are subsidized from an Energy Conservation Fund. Data from the energy consumption reports and the energy audit reports are collected in DEDP's database for further processing. The database is structured according to the Thai Standard Industrial Classification. In order to exploit the wealth of information provided by the auditing procedure the objective of the present work carried out by the consultant FhG-ISI for DEDP/BERC on behalf of the German Gesellschaft fuer Technische Zusammenarbeit (GTZ) was to recommend an appropriate set of energy efficiency indicators. This indicator set should allow DEDP to extract from the energy consumption reports, energy audit reports and other sources, useful statistical information to monitor and improve energy efficiency in Thailand. (orig.)

  4. CO2 reduction through energy conservation

    International Nuclear Information System (INIS)

    1991-05-01

    A study was carried out of the potential to economically reduce carbon dioxide emissions through energy conservation in the petroleum and natural gas industry. The study examined current and projected emissions levels, cogeneration at gas plants, flaring, economics, regulation, reporting requirements, implementation, and research and development. Economically attractive energy conservation measures can reduce oil and gas industry, exclusive of Athabasca oil sands operations, CO 2 emissions by 6-7%. The energy conservation options identified range from field energy awareness committees through to equipment retrofits and replacement. At ca 3 million tonnes/y, these reductions will not offset the increases in oil and gas related CO 2 emissions anticipated by producers and Alberta government agencies. There will be increasing emphasis on in-situ bitumen production, more energy intensive light crude oil production and increasing natural gas sales, increasing energy inputs in excess of reductions. Cogeneration of electricity for utility company distribution and for internally required steam at gas plants and in-situ production sites is not economic due to low electricity prices. 8 tabs

  5. On energy conservation and energy research. Om energioekonomisering og energiforskning

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This report to the Storting (Parliament) is the third one on energy conservation during the last 10 years. As earlier, the report mainly treats the use of energy for stationary objects. The background for this report is, above all, the increased environmental requirements to the energy policy attached to the use of fossil fuels. The economic energy conservation potential of Norway is estimated on the basis of the present energy prices and available technology. For stationary energy use it amounts to ca 23 TWh, of which 16 TWh refer to electric power and 7 TWh to oil. Among the measures of the authorities to realize this potential, information about energy economy and energy technology is one of the most important. Other important measures are research and development activities as well as temporary arrangements for economic support. Energy conservation efforts, and efforts for a better environment should often be considered together, because higher energy efficiency in general can result in important positive environmental impacts. In the long term, the global enviromental problems may be the strongest motive power for an increased effort in energy conservation. 38 figs., 22 tabs.

  6. Energy Conservation Guidebook : to be Used in Conjunction with the Energy Conservation Policies October 1993.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1993-11-01

    This guidebook is an instrument for implementing BPA`s Energy Conservation Policies established through the concensus of the four Area Office Managers and the Assistant Administrator for the Office of Energy Resources. As technical support for, and elaboration of, the Energy Conservation Policies, the Guidebook follows the format of the Policies themselves. The Guidebook tackles each section of the Policies in order, again assigning roles and responsibilities where appropriate, enlarging on policy issues and, where appropriate, outlining data considerations. The sections in order are: conservation load reduction, cost-effectiveness limits, BA management targets, consumer contributions, utility contribution, program verification, and program evaluation.

  7. Energy consumption and conservation in food retailing

    International Nuclear Information System (INIS)

    Tassou, S.A.; Ge, Y.; Hadawey, A.; Marriott, D.

    2011-01-01

    The total annual CO 2 emissions associated with the energy consumption of the major retail food outlets in the UK amount to around 4.0 MtCO 2 . The energy consumption and emissions from supermarkets varies widely and can depend on many factors such as the type and size of the store, business and merchandising practices and refrigeration and environmental control systems used. This paper provides energy consumption data of a sample of 2570 retail food stores from a number of major retail food chains in the UK. The sample covers all major store categories from convenience stores to hypermarkets and includes approximately 30% of the total number of stores in the UK having a net sales area more than 280 m 2 . The data show a wide variability of energy intensity even within stores of the same retail chain. A power law can be used to describe the variation of the average electrical energy intensity of the stores in the sample with sales area. If the electrical intensity of the stores above the average is reduced to the average by energy conservation measures, annual energy savings of the order of 10% or 840 GWh can be achieved representing 355,000 tonnes annual reduction in CO 2 emissions. The paper also discusses the major energy consuming processes in retail food stores and identifies opportunities for energy savings. - Research highlights: → Energy consumption by supermarkets in the UK is significant and a wide variability exists between stores of similar size. → Energy conservation measures to reduce energy consumption of individual stores to the average can produce a0% energy savings. → Significant opportunities for energy savings exist from the integration of HVAC and refrigeration equipment.

  8. Consumer energy - conservation policy: an analytical approach

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.

    1984-06-01

    To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described, and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programs. The result of this analytical approach to conservation policy (economic stability and economic security) are goals well worth pursuing. 13 references, 2 tables.

  9. Department of Energy workshops on industrial energy conservation reporting

    Energy Technology Data Exchange (ETDEWEB)

    Harvey, Douglas G.

    1979-01-01

    A voluntary industrial energy-conservation program was initiated and now includes 50 trade organizations representing over 3,000 companies. Their current reporting system is an effort to respond to the Energy Policy and Conservation Act requirements, as now modified by the National Energy Conservation Policy Act. DOE's Office of Industrial Programs held six workshops in various key locations between November 1978 and February 1979 to enable energy managers to develop ideas and make suggestions that would improve the current and future energy-reporting programs. This report is a summary of the wide range of recommendations that the workshop participants offered as a means of meeting the NECPA requirements and the criticism of the current reporting program. It also reflects industry's views on potential approaches to future reporting. (MCW)

  10. Environmental assessment in support of proposed interim energy conservation voluntary performance standards for new non-federal residential buildings: Volume 7

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-09-01

    The objective of this environmental assessment (EA) is to identify the potential environmental impacts that could result from the proposed voluntary residential standard (VOLRES) on private sector construction of new residential buildings. In this report, the scope, objectives, and approach of this EA are presented.

  11. Energy Conservation In Compressed Air Systems

    International Nuclear Information System (INIS)

    Yusuf, I.Y.; Dewu, B.B.M.

    2004-01-01

    Compressed air is an essential utility that accounts for a substantial part of the electricity consumption (bill) in most industrial plants. Although the general saying Air is free of charge is not true for compressed air, the utility's cost is not accorded the rightful importance due to its by most industries. The paper will show that the cost of 1 unit of energy in the form of compressed air is at least 5 times the cost electricity (energy input) required to produce it. The paper will also provide energy conservation tips in compressed air systems

  12. Energy conservation by reducing process variability

    Energy Technology Data Exchange (ETDEWEB)

    Wising, Ulrika; Lafourcade, Sebastien [Pepite S.A., Liege (Belgium); Mack, Philippe [Pepite Technologies Inc., Montreal (Canada)

    2011-12-21

    Energy conservation is becoming an increasingly important instrument to stay competitive in today is increasingly global market. Important investments have been made in infrastructure and personnel in order to improve the management of energy such as increased metering, energy dashboards, energy managers, etc. Despite these investments, the results have not materialized and there is still a significant potential to further reduce energy consumption. In this paper a new methodology will be presented that helps industry better operate existing assets in order to reduce energy consumption, without having to make capital investments. The methodology uses a combination of advanced data analysis tools and a specific implementation scheme that has lead to significant savings in industry. The advanced data analysis tools are used to analyze the variability of the process in order to assess when the plant has been operated well or not so well in the past. By finding the root causes of these variations and the key variables that can explain them, improved operating guidelines and models can be developed and implemented. The specific implementation scheme is an important part of the methodology as it involves the people operating the plant. Several user cases will be presented showing an energy conservation of between 10%-20% without capital investments necessary. (author)

  13. Smarter by Degrees. Towards new instruments for energy conservation policy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-11-15

    Achieving the government's ambition of 1.5 to 2% energy savings annually will require every effort to be made. Households, small and medium-sized businesses, government and semi-governmental institutions (energy-extensive energy consumers) will also be able to make an important contribution. This group represents considerable savings potential of about 300 PJ. There are three types of instruments that may be used for this group to achieve the desired goal (1) obligation/prohibition, i.e., regulations and standards to demand energy efficient investments (construction, facilities, equipment, etc.); (2) price incentives (subsidies/taxes) to promote energy-efficient solutions; (3)enticement/influence, appealing to reason (information, arguments) or emotion to promote the right choice/behaviour. Analysis of past experiences presents the conclusion that so-called soft instruments are sometimes briefly effective but often have little or no effect. The Council believes, however, that such a conclusion is premature, as certain conditions were not met in the past that were very important to effectiveness. First, soft instruments must be implemented consistently and over the long term (about 4 years, at least). Appealing to the very diverse consumers also requires a custom approach. The tone of the conservation policy must also be more in tune with changing trends in society. Citizens must especially be appealed to in terms of cost advantages, responsible energy consumption (good housekeeping) and comfort, whereas the emphasis in the past lay on decency, solidarity and thrift. Specific action perspectives must also be offered. Partly on the basis of experience, such as in waste collection, the Council concludes that a well-assembled mix of soft and hard instruments will be necessary to encourage energy conservation. It is clear that soft instruments alone can be expected to produce unsatisfactory results. Therefore, a combination of soft and hard instruments is advocated

  14. Annotated directory of energy conservation programs

    Energy Technology Data Exchange (ETDEWEB)

    Claxton, J.D.; McDougall, G.H.G.; Ritchie, J.R.B. (eds.)

    1980-01-01

    Summaries of 34 consumer energy conservation programs in Canada and the USA are listed. Areas of focus are: (1) home heating and cooling; (2) household appliances; (3) private transportation; and (4) community involvement. Each summary contains information on the program objectives, operating details, results to date, costs and benefits, and source of funding. The key contact person is identified and background literature references are given. ((MJJ)

  15. Department of Energy Nuclear Energy Standards Program

    International Nuclear Information System (INIS)

    Silver, E.G.

    1980-01-01

    The policy with respect to the development and use of standards in the Department of Energy (DOE) programs concerned with maintaining and developing the nuclear option for the civilian sector (both in the form of the currently used light water reactors and for advanced concepts including the Liquid Metal Fast Breeder Reactor), is embodied in a Nuclear Standards Policy, issued in 1978, whose perspectives and philosophy are discussed

  16. Energy conservation achievements by New Shorrock Mills, Ahmedabad

    International Nuclear Information System (INIS)

    Rawal, N.L.; Trivedi, R.M.

    1994-01-01

    The New Shorrock Mills, Ahmedabad is a textile mill manufacturing cloth. Managerial practices like energy auditing and energy conservation monitoring introduced to conserve energy are described. Various measures implemented to conserve energy in machines power; carding, winding, warping and sizing operations; auto looms and lighting power are described. Cost reduction in terms of rupees is given. (N.B.)

  17. Argentine nuclear energy standardization activities

    International Nuclear Information System (INIS)

    Boero, Norma; Corcuera, Roberto; Palacios, Tulio A.; Hey, Alfredo M.; Berte, G.; Trama, L.

    2004-01-01

    The International Organization for Standardization (ISO) has more than 200 Technical Committees that develop technical standards. During April 2004 took place in Buenos Aires the 14th Plenary of the ISO/TC 85 Nuclear Energy Committee. During this Plenary issues as Nuclear Terminology, Radiation Protection, Nuclear Fuels, Nuclear Reactors and Irradiation Dosimetry was dealt with. 105 International delegates and 45 National delegates (belonging to CNEA, ARN, NASA, INVAP, CONUAR, IONICS and other organizations) attended the meetings. During this meeting ISO/TC 85 changed its scope; the new scope of the Committee is 'Standardization in the fields of peaceful applications of nuclear energy and of the protection of individuals against all sources of ionizing radiations'. This work summarizes the most important advances and resolutions about the development of standards taken during this meeting as well as the main conclusions. (author) [es

  18. Pollution prevention and energy conservation: Understanding the interactions

    International Nuclear Information System (INIS)

    Purcell, A.H.

    1992-01-01

    The traditional view holds that pollution prevention is good for energy conservation and vice versa. Analysis of pollution prevention and energy conservation activities indicates, however, that interactions and synergies between environmental and energy factors can mean that pollution prevention can be energy intensive and, conversely, that energy conservation can lead to increased pollution. Full cost accounting, taking into account all media, must be performed before precise pollution prevention-energy conservation interrelationships can be characterized and quantified. Use of a pollution prevention-energy conservation matrix can further this understanding

  19. Energy conservation options for cooking with biomass in Ghana

    DEFF Research Database (Denmark)

    Nielsen, Per Sieverts; Næraa, Rikke; Karlsson, Kenneth

    1996-01-01

    Cooking is the main energy consuming activity in Ghana. This is mainly due to a generally low material standard of living, but also because the cooking process itself is energy inefficient. The fuel for cooking in Ghana is mainly biomass either in the form of wood, agricultural residues or charcoal....... An energy chain for the cooking process is established and the possible conservation options are surveyed in kitchen performance tests in Abodom in the tropical zone of Ghana. The energy consumption for the food preparation has been measured and energy saving options have been determined for some parts...... point has been reached. Most cooks tend to continue using a high heat supply even though it is not necessary. This process is often carried out without lid on the pot even though the use of lid will reduce the energy loss considerably. It is also concluded that the average fuelwood consumption in Abodom...

  20. 78 FR 79419 - Energy Conservation Program for Consumer Products and Commercial and Industrial Equipment: Effect...

    Science.gov (United States)

    2013-12-30

    ...\\ Present value Discount rate Category (million 2012$) (percent) Benefits Operating Cost Savings 1,848 7 3... Energy Conservation Standards \\5\\ Present value Discount rate Category (million 2012$) (percent) Benefits... Conservation Standards \\6\\ Present value Discount rate Category (billion 2012$) (percent) Benefits Operating...

  1. Community standards for genomic resources, genetic conservation, and data integration

    Science.gov (United States)

    Jill Wegrzyn; Meg Staton; Emily Grau; Richard Cronn; C. Dana Nelson

    2017-01-01

    Genetics and genomics are increasingly important in forestry management and conservation. Next generation sequencing can increase analytical power, but still relies on building on the structure of previously acquired data. Data standards and data sharing allow the community to maximize the analytical power of high throughput genomics data. The landscape of incomplete...

  2. Final Report Balancing energy conservation and occupant needs in ventilation rate standards for Big Box stores in California. Predicted indoor air quality and energy consumption using a matrix of ventilation scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Apte, Michael G. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mendell, Mark J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sohn, Michael D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dutton, Spencer M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Berkeley, Pam M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Spears, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2011-02-01

    Through mass-balance modeling of various ventilation scenarios that might satisfy the ASHRAE 62.1 Indoor Air Quality (IAQ) Procedure, we estimate indoor concentrations of contaminants of concern (COCs) in California “big box” stores, compare estimates to available thresholds, and for selected scenarios estimate differences in energy consumption. Findings are intended to inform decisions on adding performance-based approaches to ventilation rate (VR) standards for commercial buildings. Using multi-zone mass-balance models and available contaminant source rates, we estimated concentrations of 34 COCs for multiple ventilation scenarios: VRmin (0.04 cfm/ft2 ), VRmax (0.24 cfm/ft2 ), and VRmid (0.14 cfm/ft2 ). We compared COC concentrations with available health, olfactory, and irritant thresholds. We estimated building energy consumption at different VRs using a previously developed EnergyPlus model. VRmax did control all contaminants adequately, but VRmin did not, and VRmid did so only marginally. Air cleaning and local ventilation near strong sources both showed promise. Higher VRs increased indoor concentrations of outdoor air pollutants. Lowering VRs in big box stores in California from VRmax to VRmid would reduce total energy use by an estimated 6.6% and energy costs by 2.5%. Reducing the required VRs in California’s big box stores could reduce energy use and costs, but poses challenges for health and comfort of occupants. Source removal, air cleaning, and local ventilation may be needed at reduced VRs, and even at current recommended VRs. Also, alternative ventilation strategies taking climate and season into account in ventilation schedules may provide greater energy cost savings than constant ventilation rates, while improving IAQ.

  3. Canadian energy standards : residential energy code requirements

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, K. [SAR Engineering Ltd., Burnaby, BC (Canada)

    2006-09-15

    A survey of residential energy code requirements was discussed. New housing is approximately 13 per cent more efficient than housing built 15 years ago, and more stringent energy efficiency requirements in building codes have contributed to decreased energy use and greenhouse gas (GHG) emissions. However, a survey of residential energy codes across Canada has determined that explicit demands for energy efficiency are currently only present in British Columbia (BC), Manitoba, Ontario and Quebec. The survey evaluated more than 4300 single-detached homes built between 2000 and 2005 using data from the EnerGuide for Houses (EGH) database. House area, volume, airtightness and construction characteristics were reviewed to create archetypes for 8 geographic areas. The survey indicated that in Quebec and the Maritimes, 90 per cent of houses comply with ventilation system requirements of the National Building Code, while compliance in the rest of Canada is much lower. Heat recovery ventilation use is predominant in the Atlantic provinces. Direct-vent or condensing furnaces constitute the majority of installed systems in provinces where natural gas is the primary space heating fuel. Details of Insulation levels for walls, double-glazed windows, and building code insulation standards were also reviewed. It was concluded that if R-2000 levels of energy efficiency were applied, total average energy consumption would be reduced by 36 per cent in Canada. 2 tabs.

  4. Energy efficiency standards and innovation

    Science.gov (United States)

    Morrison, Geoff

    2015-01-01

    Van Buskirk et al (2014 Environ. Res. Lett. 9 114010) demonstrate that the purchase price, lifecycle cost and price of improving efficiency (i.e. the incremental price of efficiency gain) decline at an accelerated rate following the adoption of the first energy efficiency standards for five consumer products. The authors show these trends using an experience curve framework (i.e. price/cost versus cumulative production). While the paper does not draw a causal link between standards and declining prices, they provide suggestive evidence using markets in the US and Europe. Below, I discuss the potential implications of the work.

  5. Green Tribology Biomimetics, Energy Conservation and Sustainability

    CERN Document Server

    Bhushan, Bharat

    2012-01-01

    Tribology is the study of friction, wear and lubrication. Recently, the concept of “green tribology” as “the science and technology of the tribological aspects of ecological balance and of environmental and biological impacts” was introduced. The field of green tribology includes tribological technology that mimics living nature (biomimetic surfaces) and thus is expected to be environmentally friendly, the control of friction and wear that is of importance for energy conservation and conversion, environmental aspects of lubrication and surface modification techniques, and tribological aspects of green applications such as wind-power turbines or solar panels. This book is the first comprehensive volume on green tribology. The chapters are prepared by leading experts in their fields and cover such topics as biomimetics, environmentally friendly lubrication, tribology of wind turbines and renewable sources of energy, and ecological impact of new technologies of surface treatment.

  6. Electrorheology for energy production and conservation

    Science.gov (United States)

    Huang, Ke

    Recently, based on the physics of viscosity, we developed a new technology, which utilizes electric or magnetic fields to change the rheology of complex fluids to reduce the viscosity, while keeping the temperature unchanged. The method is universal and applicable to all complex fluids with suspended particles of nano-meter, submicrometer, or micrometer size. Completely different from the traditional viscosity reduction method, raising the temperature, this technology is energy-efficient, as it only requires small amount of energy to aggregate the suspended particles. In this thesis, we will first discuss this new technology in detail, both in theory and practice. Then, we will report applications of our technology to energy science research. Presently, 80% of all energy sources are liquid fuels. The viscosity of liquid fuels plays an important role in energy production and energy conservation. With an electric field, we can reduce the viscosity of asphalt-based crude oil. This is important and useful for heavy crude oil and off-shore crude oil production and transportation. Especially, since there is no practical way to raise the temperature of crude oil inside the deepwater pipelines, our technology may play a key role in future off-shore crude oil production. Electrorehology can also be used to reduce the viscosity of refinery fuels, such as diesel fuel and gasoline. When we apply this technology to fuel injection, the fuel droplets in the fuel atomization become smaller, leading to faster combustion in the engine chambers. As the fuel efficiency of internal combustion engines depends on the combustion speed and timing, the fast combustion produces much higher fuel efficiency. Therefore, adding our technology on existing engines improves the engine efficiency significantly. A theoretical model for the engine combustion, which explains how fast combustion improves the engine efficiency, is also presented in the thesis. As energy is the key to our national

  7. 76 FR 45606 - Desert Renewable Energy Conservation Plan, Habitat Conservation Plan and Possible Land Use Plan...

    Science.gov (United States)

    2011-07-29

    ...-N131; 80221-1112-80221-F2] Desert Renewable Energy Conservation Plan, Habitat Conservation Plan and Possible Land Use Plan Amendment, Southern California: Environmental Impact Statement AGENCY: Fish and..., as amended, for the proposed Desert Renewable Energy Conservation Plan (DRECP). The EIS will be a...

  8. Designing effective incentives for energy conservation in the public sector

    Science.gov (United States)

    Drezner, Jeffrey Alan

    Understanding why government officials behave in certain ways under particular circumstances is an important theme in political science. This research explores the design of policies and incentives targeted at public sector officials, in particular the use of market based policy tools in a non-market environment, and the influence of that organizational environment on the effectiveness of the policy. The research examines the case of Department of Defense (DoD) facility energy management. DoD energy policy includes a provision for the retention of savings generated by conservation activities: two-thirds of the savings is retained at the installation generating the savings, half to used for further investment in energy conservation, and half to be used for general morale, welfare, and recreation activities. This policy creates a financial incentive for installation energy managers to establish higher quality and more active conservation programs. A formal written survey of installation energy managers within DoD was conducted, providing data to test hypotheses regarding policy effectiveness and factors affecting policy implementation. Additionally, two detailed implementation case studies were conducted in order to gain further insights. Results suggest that policy design needs to account for the environment within which the policy will be implemented, particularly organizational culture and standard operating procedures. The retention of savings policy failed to achieve its intended outcome---retention of savings for re-investment in energy conservation---because the role required of the financial management community was outside its normal mode of operation and interests and the budget process for allocating resources did not include a mechanism for retention of savings. The policy design did not adequately address these start-up barriers to implementation. This analysis has shown that in order for retention of savings, or similar policies based on market

  9. A review of building energy regulation and policy for energy conservation in developing countries

    International Nuclear Information System (INIS)

    Iwaro, Joseph; Mwasha, Abraham

    2010-01-01

    The rapid growth of energy use, worldwide, hfs raised concerns over problems of energy supply and exhaustion of energy resources. Most of the developed countries are implementing building energy regulations such as energy standards, codes etc., to reduce building energy consumption. The position of developing countries with respect to energy regulations implementation and enforcement is either poorly documented or not documented at all. In addition, there is a lack of consistent data, which makes it difficult to understand the underlying changes that affect energy regulation implementation in developing countries. In that respect, this paper investigates the progress of building energy regulations in developing countries and its implication for energy conservation and efficiency. The present status of building energy regulations in 60 developing countries around the world was analysed through a survey of building energy regulations using online survey. The study revealed the present progress made on building energy regulations in relation to implementation, development and compliance; at the same time the study recommends possible solutions to the barriers facing building energy regulation implementation in the developing world. - Research Highlights: →Progress and implications of energy regulations in developing countries. →Investigation assessed the progress made on energy regulations using online survey. →Energy regulation activities is progressively increasing in developing countries. →The study identified 25 developing countries without energy regulatory standards. →The study shows relationship between energy regulation and energy consumption.

  10. Conservation and energy efficiency plan 2006

    International Nuclear Information System (INIS)

    2005-11-01

    This plan outlined details of Nova Scotia's proposed $5 million incremental investment in energy efficiency and conservation measures in 2006. The plan was developed through consultation with various Canadian utilities, customers and external stakeholders. A team of stakeholders identified lighting, pricing, partnerships and education as opportunities offering the greatest potential for results. Market research was conducted to identify market potential and the identification of barriers to customer adoption of programs as well as customer expectations regarding program implementation. It was anticipated that the plan will reduce electricity usage and result in significant savings for customers, as well as reducing greenhouse gas (GHG) emissions. The aim of the plan is to help build a conservation and energy efficiency culture in Nova Scotia and to bring Nova Scotia Power together with community-based partners. Specific plans for 2007 included: a 72 GWh reduction in annual electricity usage; approximately $7.7 million in annual savings to customers; a 16 MW reduction in peak electricity demand; and a 50 thousand tonne reduction of GHGs. A business case was presented along with details of proposed residential, commercial and industrial programs. A cost benefit analysis was provided, as well as an outline of the plan's budget and organizational structure. It was concluded that the success of the various program elements will be based on quantitative and qualitative data on the actual effect on energy use of each customer sector, as well as its effect on system demand profiles. Data will be collected through the use of customer surveys, questionnaires, and direct feedback from partners, educators and manufactures and suppliers. 11 tabs., 16 figs

  11. Energy conservation attitudes, knowledge, and behaviors in science laboratories

    International Nuclear Information System (INIS)

    Kaplowitz, Michael D.; Thorp, Laurie; Coleman, Kayla; Kwame Yeboah, Felix

    2012-01-01

    Energy use per square foot from science research labs is disproportionately higher than that of other rooms in buildings on campuses across the nation. This is partly due to labs’ use of energy intensive equipment. However, laboratory management and personnel behavior may be significant contributing factors to energy consumption. Despite an apparent increasing need for energy conservation in science labs, a systematic investigation of avenues promoting energy conservation behavior in such labs appears absent in scholarly literature. This paper reports the findings of a recent study into the energy conservation knowledge, attitude and behavior of principle investigators, laboratory managers, and student lab workers at a tier 1 research university. The study investigates potential barriers as well as promising avenues to reducing energy consumption in science laboratories. The findings revealed: (1) an apparent lack of information about options for energy conservation in science labs, (2) existing operational barriers, (3) economic issues as barriers/motivators of energy conservation and (4) a widespread notion that cutting edge science may be compromised by energy conservation initiatives. - Highlights: ► Effective energy conservation and efficiency depend on social systems and human behaviors. ► Science laboratories use more energy per square foot than any other academic and research spaces. ► Time, money, quality control, and convenience overshadow personnel’s desire to save energy. ► Ignorance of conservation practices is a barrier to energy conservation in labs.

  12. Energy conservation on Nova Scotia farms: Baseline energy data

    International Nuclear Information System (INIS)

    Bailey, J.A.; Gordon, R.; Burton, D.; Yiridoe, E.K.

    2008-01-01

    Direct energy use is a small but essential component of the farm greenhouse gas (GHG) budget. Improvements in energy efficiency and renewable energy can help reduce farm operating costs, improve air quality and reduce GHG emission levels. Energy conservation is especially important in Nova Scotia (NS), Canada, where fossil fuels, particularly coal, remain the primary source of electrical generation. Responses from mail surveys were used to establish baseline data on a cross-section of NS farms with respect to direct energy costs and usage to demonstrate differences in farm type and size. A 32% (N=224) response rate was achieved. Based on this survey, the average energy bill for a NS farm in 2004 was $11,228, with most (61.7%) of their energy cost attributable to the purchase of petroleum products. Almost all farmers (96.4%) indicated that their energy cost was a primary concern. Farmers identified the operation of vehicles and mobile equipment, as well as lighting and heating as having the greatest energy requirements in their operations. Energy usage varied with farm type and size. NS farms consumed 1.2 petajoules of energy equivalent to 127 kilotonnes of CO 2 with 52.7% of emissions from electricity use in 2004

  13. An analysis of energy conservation measure costs

    International Nuclear Information System (INIS)

    Jones, R.; Ellis, R.; Gellineau, D.

    1990-01-01

    This paper reports on a Denver Support Office project to evaluate cost estimation in the Institutional Conservation Program. Unit cost characteristics and cost prediction accuracy were evaluated from 1,721 Energy Conservation Measures (ECMs) and 390 Technical Assistance (TA) reports funded in the last six years. This information is especially useful to state and DOE review engineers in determining the reasonableness of future cost estimates. The estimated cost provisions for TA report grants were generally adequate to cover the actual costs. Individually, there was a tendency for TA reports to cost less than estimated by about 10%. TA report unit costs averaged $.09 to $.11 per square foot, and decreased as the building size increased. Individually, there was a tendency for ECMs to cost more than estimated by about 17%. Overall, the estimated costs of the 1,721 measures were $20.4 minion, while the actual costs were $21.4 million. This 4.6% difference indicates that, overall, ECM cost estimates have provided a reasonable basis for grant awards. There was a high variation in ECM unit costs. The data did not support speculation that there is a tendency to manipulate cost estimates to fit ECMs within the simple payback eligibility criteria of 2 to 10 years

  14. Energy Conservation, Understanding and Activities for Young People.

    Science.gov (United States)

    Federal Energy Administration, Washington, DC.

    This publication on energy conservation is designed as a resource material for the classroom. It is divided into three chapters concerning a definition of energy, the conservation of energy, and the uses of energy. For each subtopic within the chapters, there is background information and suggested project topics designed for secondary school…

  15. Survey of energy conservation in India: priorities and policy dimensions

    Energy Technology Data Exchange (ETDEWEB)

    Pachauri, R K

    1983-01-01

    The formulating and implementing of an energy conservation policy in India was delayed, because emphasis was placed upon an increase of energy production in the mistaken belief that this is tantamount to an improvement in the standard of life. Statistical data of energy production according to its source and of its consumption by individual sectors of the national economy are presented. They show that by far the largest turnover is in energy derived from firewood and vegetable and animal waste for domestic use in rural India. Although a very great potential for energy conservation exists in this domain, its implementation on a large scale is hardly practicable because it would affect many millions of village households with very different life styles dictated by varying natural conditions in individual areas of the country. Energy derived from oil and coal is used rather wastefully mainly because of obsolete equipment and technology. There is a vast scope for improvement in this area and appropriate measures have been initiated by the Government. The demand for oil derivatives for transportation is increasing dangerously, mainly because of dieselization of the national railways and of development of motorized road transport. A turnaround of this trend would require, however, a restructuring of the Indian transportation system.

  16. 78 FR 63410 - Energy Conservation Program for Consumer Products: Test Procedures for Direct Heating Equipment...

    Science.gov (United States)

    2013-10-24

    ... test procedures for direct heating equipment and pool heaters established under the Energy Policy and... U.S.C. 6293(e)(2)) The current energy conservation standards for direct heating equipment and pool... DEPARTMENT OF ENERGY 10 CFR Part 430 [Docket Number EERE-2013-BT-TP-0004] RIN 1904-AC94 Energy...

  17. Energy conservation and pomeron loops in high energy evolution

    International Nuclear Information System (INIS)

    Gustafson, Goesta

    2007-01-01

    We present a formalism which modifies the Mueller Dipole Model such that it incorporates energy-momentum conservation as well as important colour suppressed effects in the cascade evolution. The formalism is implemented in a Monte Carlo simulation program, and the results are compared to inclusive data from HERA and the Tevatron. We here find a generally very good agreement between our model and the experimental data. (author)

  18. Energy Conservation and Passive Solar Techniques in Campus Renovation.

    Science.gov (United States)

    Probasco, Jack; And Others

    1981-01-01

    The analysis of a building from an energy conservation and passive solar potential has three aspects: building envelope, landscaping, and room utilization. Typical conservation and solar control modifications are listed. (Author/MLF)

  19. Energy conservation opportunities: audit vis-a-vis mine productivity

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, G.H.

    2009-07-01

    Mining operation, whether opencast or underground, with modern equipment is highly energy intensive, needing energy conservation and management to ensure efficiency, cost effectiveness, and overall productivity. Exhaustible primary energy resources such as coal, lignite, oil, and nuclear fuels are being mined out to meet our energy needs. An attempt has been made in this paper to highlight the energy conservation opportunities, energy audit, the relevant Energy Conservation Act 2001 and certain energy saving measures leading to higher productivity followed by a few case study examples. 3 refs.

  20. Energy conservation in nationalised transportation sector

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, R C

    1980-01-01

    About 60% of high speed diesel is consumed by the road transport industry. The hike in fuel prices calls for urgent measures to conserve diesel. The paper discusses the various measures undertaken to conserve diesel in the nationalized transport sector.

  1. Strategies for energy conservation in HWP (M)

    International Nuclear Information System (INIS)

    Rama Rao, V.V.S.; Gupta, R.V.; Rao, A.L.N.

    2002-01-01

    Heavy water plant at Manuguru is designed to produce 185 MTY of NG heavy water based on bi-thermal H 2 S-H 2 O exchange process. Being a plant based on isotopic separation process, the requirement of feed water, utilities and the inventory of H 2 S is very huge. Sustained efforts have brought down the specific energy consumption from 53.3 GJ/Kg of nuclear grade product in the financial year 1997-98 to a value of 37.6 GJ/Kg of product in the financial year 2001-02, which amounts to a reduction of 29.5%. Several modifications have been done in the following areas, which contributed towards significant energy conservation eg. reduction in consumption of steam, electric power, chemicals and man hours and in the down time of the plant/equipment's, reduction in the loss of H 2 S, D 2 O and various utilities, enhanced recycling of liquid effluents, increase in production, on stream hours, purity of the inputs, avoiding trips and unusual occurrences, trimming the built in cushions, changes in the design/elimination of certain design provisions resulting in savings, increase in operational flexibility to facilitate smooth operation, improved house keeping and quality management, improved O and M practices, upgradation of required skills/qualifications of the personnel and increasing their motivation. This paper highlights the improvements done/being taken up since the year 2000. (author)

  2. Protocol Monitoring Energy Conservation; Protocol Monitoring Energiebesparing

    Energy Technology Data Exchange (ETDEWEB)

    Boonekamp, P.G.M. [ECN Beleidsstudies, Petten (Netherlands); Mannaerts, H. [Centraal Planburea CPB, Den Haag (Netherlands); Tinbergen, W. [Centraal Bureau voor de Statistiek CBS, Den Haag (Netherlands); Vreuls, H.H.J. [Nederlandse onderneming voor energie en milieu Novem, Utrecht (Netherlands); Wesselink, B. [Rijksinstituut voor Volksgezondheid en Milieuhygiene RIVM, Bilthoven (Netherlands)

    2001-12-01

    On request of the Dutch ministry of Economic Affairs five institutes have collaborated to create a 'Protocol Monitoring Energy Conservation', a common method and database to calculate the amount of energy savings realised in past years. The institutes concerned are the Central Bureau of Statistics (CBS), the Netherlands Bureau for Economic Policy Analysis (CPB), the Energy research Centre of the Netherlands (ECN), the National Agency for Energy and Environment (Novem) and the Netherlands Institute of Public Health and the Environment (RIVM). The institutes have agreed upon a clear definition of energy use and energy savings. The demarcation with renewable energy, the saving effects of substitution between energy carriers and the role of import and export of energy have been elaborated. A decomposition method is used to split up the observed change in energy use in a number of effects, on a national and sectoral level. This method includes an analysis of growth effects, effects of structural changes in production and consumption activities and savings on end use or with more efficient conversion processes. To calculate these effects the total energy use is desegregated as much as possible. For each segment a reference energy use is calculated according to the trend in a variable which is supposed to be representative for the use without savings. The difference with the actual energy use is taken as the savings realised. Results are given for the sectors households, industry, agriculture, services and government, transportation and the energy sector; as well as a national figure. A special feature of the protocol method is the application of primary energy use figures in the determination of savings for end users. This means that the use of each energy carrier is increased with a certain amount, according to the conversion losses caused elsewhere in the energy system. The losses concern the base year energy sector and losses abroad for imports of secondary

  3. Energy as form giver: conservation technologies in architecture's future

    Energy Technology Data Exchange (ETDEWEB)

    Vosbeck, R R

    1981-07-01

    The need to conserve energy has changed architecture, which now has distinct energy-conscious designs and a new design vocabulary. Future designs will consider how energy affects buildings and minimize the impact in siting and landscaping decisions. Existing buildings must also be accommodated. No building performance standards exist yet that allow architects to be creative, although architects are working more closely with engineers and builders. Earth-sheltering designs will have to overcome psychological barriers, but the opportunities to preserve open space and views will improve their acceptability. The American Institute of Archiects will assume leadership in this area, but it will not take over all the research programs abandoned by the Reagan administration. Future housing will be more compact, grouped, and closely integrated. (DCK)

  4. 77 FR 76952 - Energy Conservation Program for Consumer Products: Association of Home Appliance Manufacturers...

    Science.gov (United States)

    2012-12-31

    ... dishwashers. Given that 65 percent of all standard dishwashers currently on the market meet or exceed the..., standard, or criteria for that determination. It is a textbook arbitrary and capricious determination. As... the market meet or exceed the minimum energy conservation standards established in the direct final...

  5. Careers in the Renewable Energy and Conservation Professions and Trades.

    Science.gov (United States)

    Department of Energy, Washington, DC.

    Many kinds of jobs can be found in the renewable energy and energy conservation industries. This pamphlet indicates that a large career potential exists within the solar and conservation professions and trades. These careers consist of individuals who design, build, or install solar heating or hot water systems, who implement energy conservation…

  6. 40 CFR 73.26 - Conservation and renewable energy reserve.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Conservation and renewable energy... renewable energy reserve. The Administrator will allocate 300,000 allowances to the Conservation and Renewable Energy Reserve subaccount of the Acid Rain Data System. Allowances from this Reserve will be...

  7. Energy pattern and conservations of condiment produced from soybean (Glycine max)

    OpenAIRE

    Ismaila B. Anjorin; Rahman Akinoso; Mayowa S. Sanusi

    2018-01-01

    Energy being one of the largest operating expenses in most organizations especially manufacturing and processing industries leading to considerable scope for energy conservation and hence cost. Information on energy utilization and conservation pattern were obtained based on time taken, number of person involved and sources of energy using standard energy equations. A total of 445.40 ± 17.32MJkg-1 where thermal energy (420MJ ≈ 94%) and manual energy (25.40MJ ≈ 6%) were the only forms of energ...

  8. Training program for energy conservation in new-building construction. Volume IV. Energy conservation technology: advanced course for plan examiners

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    A Model Code for Energy Conservation in New Building Construction has been developed by those national organizations primarily concerned with the development and promulgation of model codes. The technical provisions are based on ASHRAE Standard 90-75 and are intended for use by state and local officials. This manual contains a more in-depth training in the review techniques and concepts required by the plan examiners and code officials in administering the code for conventional (buildings of 3 stories or less) construction.

  9. Department of Defense Facilities Energy Conservation Policies and Spending

    National Research Council Canada - National Science Library

    Andrews, Anthony

    2008-01-01

    .... This report reviews energy conservation legislation and Executive Orders that apply to the Department of Defense, directives and instructions to the military departments and agencies on implementing...

  10. 76 FR 13168 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2011-03-10

    ... average unit costs of residential energy in a Federal Register notice entitled, ``Energy Conservation... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  11. Energy conservation measures adopted at Heavy Water Plant, Manuguru

    International Nuclear Information System (INIS)

    Gupta, R.V.; Venugopal, M.

    1997-01-01

    The importance of conservation of energy is well recognised all over the world as the world reserves of fossil fuels will eventually run out depending on the rate of their use. This paper deals with various energy conservation schemes adopted at Heavy Water Plant, Manuguru (HWPM). Most energy conservation measures offer large financial saving with very short pay back periods. This fact has been well recognised by the management of HWPM as well as Heavy Water Board and their wholehearted and enthusiastic approach to energy conservation and energy management yielded very good results in reducing the operating cost. The process of energy conservation is not a one time exercise. Persistent efforts are on to identify the areas like condition of heat exchangers, margins in control valves, steam and condensate leakages etc. for further reduction in energy consumption

  12. On Study of Application of Power Electronical Technology in Field of Energy Conservation

    Science.gov (United States)

    Song, Ke

    2017-09-01

    aiming at achieving the sustainable development in economy and improving living standard of the residents, the government departments in China have strengthened the promotion of green, low-carbon and sustainable development concepts. Under this context, the energy conservation concept is implemented during the implementation of social production and life activities. Currently, in order to ensure the improvement in social energy conservation benefits, the advanced technologies are applied by China's enterprises and residents. This paper, based on this, discusses the development situations of energy conservation in China, and analyzes the application of power electronical technology in the field of energy conservation, hoping to realize the sustainable development of energy conservation cause in China and to gain high yield.

  13. Energy conservation efforts in Indian mining industry - an overview

    International Nuclear Information System (INIS)

    Pradhan, G.K.; Chattoraj, P.

    2010-01-01

    Conservation of energy is a national agenda as had been set by our Prime Minister at various fora, in the case of coal mining also there is ample scope to reduce specific energy conservation. The issue can be resolved through 'energy audit' so as to identify the areas of improvement, technology to introduce and innovative system to adopt. In a nutshell it can be concluded that, through energy audit, we can immediately save 10-15 % of energy without any major investment

  14. Energy conservation and the principle of equivalence

    International Nuclear Information System (INIS)

    Haugan, M.P.

    1979-01-01

    If the equivalence principle is violated, then observers performing local experiments can detect effects due to their position in an external gravitational environment (preferred-location effects) or can detect effects due to their velocity through some preferred frame (preferred frame effects). We show that the principle of energy conservation implies a quantitative connection between such effects and structure-dependence of the gravitational acceleration of test bodies (violation of the Weak Equivalence Principle). We analyze this connection within a general theoretical framework that encompasses both non-gravitational local experiments and test bodies as well as gravitational experiments and test bodies, and we use it to discuss specific experimental tests of the equivalence principle, including non-gravitational tests such as gravitational redshift experiments, Eoetvoes experiments, the Hughes-Drever experiment, and the Turner-Hill experiment, and gravitational tests such as the lunar-laser-ranging ''Eoetvoes'' experiment, and measurements of anisotropies and variations in the gravitational constant. This framework is illustrated by analyses within two theoretical formalisms for studying gravitational theories: the PPN formalism, which deals with the motion of gravitating bodies within metric theories of gravity, and the THepsilonμ formalism that deals with the motion of charged particles within all metric theories and a broad class of non-metric theories of gravity

  15. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  16. 76 FR 647 - Energy Conservation Program: Test Procedures for Electric Motors and Small Electric Motors

    Science.gov (United States)

    2011-01-05

    ... Electric Motors and Small Electric Motors; Proposed Rule #0;#0;Federal Register / Vol. 76, No. 3... Motors and Small Electric Motors AGENCY: Office of Energy Efficiency and Renewable Energy, Department of... motors and small electric motors, clarify the scope of energy conservation standards for electric motors...

  17. Consumer energy conservation policies and programs in the Netherlands

    International Nuclear Information System (INIS)

    Boer, J. de; Ester, P.; Mindell, C.; Schopman, M.

    1983-01-01

    This report presents an overview of consumer energy conservation policies and programs in the Netherlands and analyses them in terms of program objectives, conservation strategies, program instruments, context elements, and impacts on energy consumption, on consumers' lifestyles and on the environment. Part 1 briefly outlines the energy situation in the Netherlands. Diversification of energy sources and conservation of energy use are the main themes of Dutch energy policy. Controversial issues are the export volume of natural gas and the acceptability of nuclear energy. Part 2 describes and evaluates a number of consumer energy conservation programs. A broad range of programs is presented, including governmental programs (mass media compaigns, the national insulation program), initiatives from consumer organizations and environmental groups, as well as projects on the community level. Part 3 summarizes the main findings and suggests some policy recommendations. The climate of opinion in the Netherlands appears to be quite favorable towards energy conservation. The commitment to conserve, however, is not very strong. Given the broad variety of conservation programs the necessity of coordination is emphasized. As consumers tend to be weakly represented in the program agencies, it is recommended to extend or introduce their participation. Particular attention is given to the lack of evaluation studies. Usually, program impacts are unknown. The desirability of utilizing community level indicators in the assessment of energy conservation policy is underlined. (orig.)

  18. Department of Energy Standards Index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  19. Atomic energy, environment and energy conservation in Eastern Europe

    International Nuclear Information System (INIS)

    Kanno, Koko

    1990-01-01

    About 12 % of generated electric power is the nuclear power in Eastern European countries. Generally electric power is short in these countries, and as the countermeasures for environment, the promotion of nuclear power generation is considered. However, the public opinion opposing it is also strong. The situation in respective countries is briefly discussed. The prevention of warming of the earth and the reduction of carbon dioxide gas release are the largest environmental problems discussed in western countries, but in Eastern European countries, the far more primitive problem of the damage due to SO 2 is serious. Notwithstanding high sulfur brown coal is the main fuel, the installation of desulfurizing facilities has been neglected. The demand for the countermeasures to environmental pollution by people has become strong. The energy efficiency in Eastern European countries is poor, and it is one of the causes of environmental pollution. The industrial structure is centering around heavy industries which consume much energy, the energy loss arises due to the delay of equipment modernization, and the energy is cheap, so its saving is neglected. Energy conservation is important. (K.I.)

  20. 78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2013-03-22

    ... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  1. Energy conservation and efficiency in manufacturing: Employee decisions and actions

    Science.gov (United States)

    Corson, Marla D.

    Energy conservation and intensity reduction efforts are becoming increasingly more prevalent and ultimately necessary, especially for energy-intensive manufacturing companies in particular to stay in business. Typical actions are to change technology, and thus, realize an energy cost savings in overall utilities. However, in today's competitive market, with climate change and other environmental impacts as well, it is necessary for the cost of energy to be valued as a cost of making a product, and thus, managed at the same level as the cost of labor or materials. This research assessed human behavior at the individual and organizational levels both at work and at home that either prompted or prohibited employees from taking daily action to conserve energy or develop greater energy efficient practices. Ultimately, the questions began with questions regarding employee views and knowledge of energy at work and at home and what drives both behaviors toward conservation or efficiency. And, the contribution identifies the key drivers, barriers, and/or incentives that affect those behaviors. The results of this study show that the key driver and motivator for energy conservation both at home and work is cost savings. The study showed that to further motivate individuals to conserve energy at home and work, more knowledge of the impact their actions have or could have as well as tools would be needed. The most poinient aspect of the research was the level of importance placed on energy conservation and the desire to conserve. The feedback given to the open ended questions was quite impressive regarding what employees have done and continue to do particularly within their homes to conserve energy. These findings brought about final recommendations that were in fact not expected but could significantly influence an increase in energy conservation at work by leveraging the existing desire to conserve which is a key component to decision making.

  2. Conservation of energy for the Euler-Korteweg equations

    KAUST Repository

    Dębiec, Tomasz

    2017-12-30

    In this article we study the principle of energy conservation for the Euler-Korteweg system. We formulate an Onsager-type sufficient regularity condition for weak solutions of the Euler-Korteweg system to conserve the total energy. The result applies to the system of Quantum Hydrodynamics.

  3. 24 CFR 965.306 - Energy conservation equipment and practices.

    Science.gov (United States)

    2010-04-01

    ... Measures § 965.306 Energy conservation equipment and practices. In purchasing original or, when needed, replacement equipment, PHAs shall acquire only equipment that meets or exceeds the minimum efficiency... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Energy conservation equipment and...

  4. Financial Energy Conservation Projects at Independent Colleges and Universities.

    Science.gov (United States)

    Morrell, L. R.

    1981-01-01

    Factors affecting financial decisions for energy conservation projects at independent colleges and universities and methods that may be used when making a financial investment decision are examined, along with sources of funding for the projects. Projects that result in the conservation of energy resources might, in a time of extreme shortages,…

  5. Energy conservation in molecular dynamics simulations of classical systems

    DEFF Research Database (Denmark)

    Toxværd, Søren; Heilmann, Ole; Dyre, J. C.

    2012-01-01

    Classical Newtonian dynamics is analytic and the energy of an isolated system is conserved. The energy of such a system, obtained by the discrete “Verlet” algorithm commonly used in molecular dynamics simulations, fluctuates but is conserved in the mean. This is explained by the existence...

  6. A Better 2-D Mechanical Energy Conservation Experiment

    Science.gov (United States)

    Paesler, Michael

    2012-01-01

    A variety of simple classical mechanics energy conservation experiments are used in teaching laboratories. Typical one-dimensional (1-D) setups may involve falling balls or oscillating springs. Many of these can be quite satisfying in that students can confirm--within a few percent--that mechanical energy is conserved. Students generally have…

  7. Conservation of energy for the Euler-Korteweg equations

    KAUST Repository

    Dębiec, Tomasz; Gwiazda, Piotr; Świerczewska-Gwiazda, Agnieszka; Tzavaras, Athanasios

    2017-01-01

    In this article we study the principle of energy conservation for the Euler-Korteweg system. We formulate an Onsager-type sufficient regularity condition for weak solutions of the Euler-Korteweg system to conserve the total energy. The result applies to the system of Quantum Hydrodynamics.

  8. Facts about industrial energy conservation in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, William A.

    1979-07-01

    The story of energy conservation in the US with particular emphasis on industry is presented. Then, the energy conservation program in General Motors including organization, plant guidelines, communication and motivation techniques, successful case histories, and some concepts for future savings is described in detail. (MCW)

  9. Potential for energy-conserving capital equipment in UK industries

    Energy Technology Data Exchange (ETDEWEB)

    Fawkes, S D

    1986-01-01

    A summary is given of recent research into the potential for energy-conserving capital equipment in UK industries. The research had significant findings regarding the feasibility of achieving low-energy scenarios. It also stressed the importance of site specific factors in inhibiting incremental technical change such as that common in energy-conservation investments, developed a soft systems model of energy-management activities and investigated current progress and management styles in the brewing, malting, distilling and dairy sectors.

  10. Intercity passenger transportation: energy efficiency and conservation case study

    Energy Technology Data Exchange (ETDEWEB)

    Khan, A.M.

    1981-01-01

    To demonstrate a methodology for energy analysis and to advance technical knowledge on the energy conservation potential in intercity passenger transportation, this paper reports findings of a case study of the Toronto-Ottawa-Montreal multimodal system. From a total (direct and indirect) energy perspective for origin-destination travel, energy efficiency and conservation potential of technological improvements, modal shifts and increased load factors are reported. 11 refs.

  11. 10 CFR 431.97 - Energy efficiency standards and their effective dates.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Energy efficiency standards and their effective dates. 431.97 Section 431.97 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY PROGRAM FOR CERTAIN COMMERCIAL AND INDUSTRIAL EQUIPMENT Commercial Air Conditioners and Heat Pumps Energy Efficiency...

  12. Airline energy conservation options : summary options

    Science.gov (United States)

    1973-07-27

    In late May, 1973 the task of determining and evaluating measures for conserving fuel consumed by the airline industry was undertaken. This task was a part of the larger effort conducted by the Transportation Systems Center to determine measures that...

  13. 77 FR 14509 - State Energy Program and Energy Efficiency and Conservation Block Grant (EECBG) Program; Request...

    Science.gov (United States)

    2012-03-12

    ... DEPARTMENT OF ENERGY [Docket No. EESEP0216] State Energy Program and Energy Efficiency and Conservation Block Grant (EECBG) Program; Request for Information AGENCY: Office of Energy Efficiency and... (SEP) and Energy Efficiency and Conservation Block Grant (EECBG) program, in support of energy...

  14. Energy Transformation: Teaching Youth about Energy Efficiency while Meeting Science Essential Standards

    Science.gov (United States)

    Kirby, Sarah D.; Chilcote, Amy G.

    2014-01-01

    This article describes the Energy Transformation 4-H school enrichment curriculum. The curriculum addresses energy efficiency and conservation while meeting sixth-grade science essential standards requirements. Through experiential learning, including building and testing a model home, youth learn the relationship between various technologies and…

  15. Overview of energy demand and opportunities for conservation

    Energy Technology Data Exchange (ETDEWEB)

    Graham, P. J.

    1977-10-15

    The widespread practice of conservation could make a substantial reduction in the rate of growth of demand and hence in the rate at which resources need to be developed and consumed. An attempt is not made to show that conservation is an alternative to increasing energy supply. After reviewing the consumption of energy before the 1973 energy crisis, the main features of conservation which have brought it to the forefront of energy policy are examined. Some information on present consumption patterns in New Zealand is presented.

  16. Energy conservation in mechanical industry; Maitrise de l`energie dans les industries mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The workshop is composed of 12 communications on the theme of energy consumption, conservation and management in industry, and more especially in metal industry: evaluation of the energy savings potential in the French industry; official energy diagnosis procedure in buildings; the French national gas utility policy for energy conservation and economical performance in industry; energy conservation with speed variators for electric motors; energy audits and energy metering for conservation objectives. Examples of energy efficient systems or energy audits in various industrial sectors (compressed air, industrial buildings, heat treatments, curing...) are also presented. The electric power quality EDF`s contract is also discussed

  17. Energy resources, CO2 production and energy conservation

    International Nuclear Information System (INIS)

    O'Callaghan, P.W.

    1993-01-01

    World fossil fuel reserves, historical and current rates of consumption are reviewed and estimates of indigeneous lives in geographical regions are made. Rates of production and accumulations of carbon dioxide and other greenhouse gases in the atmosphere are calculated and correlations made with measured global mean temperatures and concomitant sea-level rises. It is concluded that, if present rates of global fossil-fuel consumptions continue unabated, the world's fossil-fuel store will be depleted by the year 2050. This would be accompanied by a substantial rise in global mean temperature. The effects of various protocols for the reductions of emissions are examined. It is concluded that there is no alternative than to cease the production and release into the atmosphere of the more damaging man-made greenhouse gases as soon as is practicably possible and to seek a sustained reduction in the rates of combustion of fossil fuels world-wide via energy management and conservation. (author)

  18. Energy conservation and cost benefits in the dairy processing industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    Guidance is given on measuring energy consumption in the plant and pinpointing areas where energy-conservation activities can return the most favorable economics. General energy-conservation techniques applicable to most or all segments of the dairy processing industry, including the fluid milk segment, are emphasized. These general techniques include waste heat recovery, improvements in electric motor efficiency, added insulation, refrigeration improvements, upgrading of evaporators, and increases in boiler efficiency. Specific examples are given in which these techniques are applied to dairy processing plants. The potential for energy savings by cogeneration of process steam and electricity in the dairy industry is also discussed. Process changes primarily applicable to specific milk products which have resulted in significant energy cost savings at some facilities or which promise significant contributions in the future are examined. A summary checklist of plant housekeeping measures for energy conservation and guidelines for economic evaluation of conservation alternatives are provided. (MHR)

  19. Energy Conservation in Dissipative Processes: Teacher Expectations and Strategies Associated with Imperceptible Thermal Energy

    Science.gov (United States)

    Daane, Abigail R.; McKagan, Sarah B.; Vokos, Stamatis; Scherr, Rachel E.

    2015-01-01

    Research has demonstrated that many students and some teachers do not consistently apply the conservation of energy principle when analyzing mechanical scenarios. In observing elementary and secondary teachers engaged in learning activities that require tracking and conserving energy, we find that challenges to energy conservation often arise in…

  20. 78 FR 62970 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Science.gov (United States)

    2013-10-23

    ... Standard E. Definition of Basic Model F. Statistical Sampling Plans G. Information To Be Provided in... administrative convenience based on their nature or type. Under EPCA, the energy conservation program consists... Reference of Standards 5. Basic Models 6. Statistical Sampling Plans 7. Information To Be Provided in...

  1. Energy conservation potential in Taiwanese textile industry

    International Nuclear Information System (INIS)

    Hong, Gui-Bing; Su, Te-Li; Lee, Jenq-Daw; Hsu, Tsung-Chi; Chen, Hua-Wei

    2010-01-01

    Since Taiwan lacks sufficient self-produced energy, increasing energy efficiency and energy savings are essential aspects of Taiwan's energy policy. This work summarizes the energy savings implemented by 303 firms in Taiwan's textile industry from the on-line Energy Declaration System in 2008. It was found that the total implemented energy savings amounted to 46,074 ton of oil equivalent (TOE). The energy saving was equivalent to 94,614 MWh of electricity, 23,686 kl of fuel oil and 4887 ton of fuel coal. It represented a potential reduction of 143,669 ton in carbon dioxide emissions, equivalent to the annual carbon dioxide absorption capacity of a 3848 ha plantation forest. This study summarizes energy-saving measures for energy users and identifies the areas for making energy saving to provide an energy efficiency baseline.

  2. Conservation – a new and efficient source of energy

    CSIR Research Space (South Africa)

    National Building Research Institute

    1981-09-01

    Full Text Available Energy is becoming increasingly expensive. Conservation can offset the increase in energy cost and can therefore be considered a new and can fairly inexpensive source of energy. The following article looks at the ways in which energy savings in both...

  3. US energy conservation and efficiency policies. Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert K.; Onysko, Ganna [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); McGowan, Elizabeth; Scheer, Richard M. [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States)

    2010-11-15

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future. (author)

  4. US energy conservation and efficiency policies: Challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Robert K. [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); McGowan, Elizabeth [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States); Onysko, Ganna, E-mail: gonysko@thegef.or [Global Environment Facility, Climate Change and Chemicals, 1818 H Street, NW, MSN G6-602, Washington, DC 20433 (United States); Scheer, Richard M. [Energetics Incorporated, 7067 Columbia Gateway Drive, Suite 200, Columbia, MD 21046 (United States)

    2010-11-15

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future.

  5. US energy conservation and efficiency policies: Challenges and opportunities

    International Nuclear Information System (INIS)

    Dixon, Robert K.; McGowan, Elizabeth; Onysko, Ganna; Scheer, Richard M.

    2010-01-01

    Expanding energy conservation and efficiency in every sector nationwide is one of the most cost-effective instruments for reducing US energy imports, the trade deficit and energy's environmental impacts. For these reasons, energy conservation and efficiency have been essential elements of US energy policy since the oil embargos and price spikes of the 1970s. The Energy Independence and Security Act of 2007 (EISA) is the latest federal legislation to expand and strengthen US energy conservation and efficiency policies, programs, and practices. Specifically, EISA and its recent predecessor, the Energy Policy Act of 2005 (EPAct05), contain almost 200 titles with new provisions for energy conservation and efficiency aimed at improvements in vehicle fuel economy. These provisions include efficiency of appliances and lighting; energy savings in residential, commercial, and government buildings; the efficiency of industrial manufacturing plants; and the efficiency of electric power delivery and end-use. These actions have begun to contribute to new federal, state, and local policies, programs, and practices across the US, and expectations are high for increases in the level of energy savings. This paper summarizes the history of US energy conservation and efficiency policies, outlines EISA's and EPAct05's key provisions, and considers prospects for the future.

  6. Advances in Energy Conservation of China Steel Industry

    Directory of Open Access Journals (Sweden)

    Wenqiang Sun

    2013-01-01

    Full Text Available The course, technical progresses, and achievements of energy conservation of China steel industry (CSI during 1980–2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011–2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years’ research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  7. Advances in energy conservation of China steel industry.

    Science.gov (United States)

    Sun, Wenqiang; Cai, Jiuju; Ye, Zhu

    2013-01-01

    The course, technical progresses, and achievements of energy conservation of China steel industry (CSI) during 1980-2010 were summarized. Then, the paper adopted e-p method to analyze the variation law and influencing factors of energy consumptions of large- and medium-scale steel plants within different stages. It is pointed out that energy consumption per ton of crude steel has been almost one half lower in these thirty years, with 60% as direct energy conservation owing to the change of process energy consumption and 40% as indirect energy conservation attributed to the adjustment of production structure. Next, the latest research progress of some key common technologies in CSI was introduced. Also, the downtrend of energy consumption per ton of crude steel and the potential energy conservation for CSI during 2011-2025 were forecasted. Finally, it is indicated that the key topic of the next 15 years' research on the energy conservation of CSI is the synergistic operation of material flow and energy flow. It could be achieved by the comprehensive study on energy flow network optimization, such as production, allocation, utilization, recovery, reuse, and resource, according to the energy quantity, quality, and user demand following the first and second laws of thermodynamics.

  8. Report on energy conservation. Potential feasibility study on energy conservation at the national textile factories (Energy-saving equipment)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    In consideration of the future CDM project, feasibility study was made on the energy conservation/cost reduction in national textile factories in Egypt. In textile factories in Egypt, the steam by oil fueled boiler is used in dyeing, drying and other production processes. In this study, studied were the energy conservation effect, greenhouse effect gas reduction effect and economical efficiency in the case of using electric power/steam by the natural gas fueled cogeneration system. As a result of the study, the energy conservation effect in 6 national textile factories became 13% on average, which equals to the conservation of 15,000 toe per year. The greenhouse effect gas reduction effect also became 13%, which equals to the reduction of approximately 46,000 t-CO2 per year. As to the economical efficiency, the depreciation period of investment became 4.0-8.6 years (5.6 years on average). In the light of the operation period of cogeneration facilities of 15 years, it was indicated that the system was very advantageous. (NEDO)

  9. Energy conservation in pulp and paper industry: some thoughts

    Energy Technology Data Exchange (ETDEWEB)

    Sadawarte, N. S.; Prasad, A. K.; Khanolkar, V. D.; Shenoy, S. C.

    1980-03-15

    The pulp and paper industry is highly energy intensive. In view of the spiralling fuel prices and rising power costs, there is an urgent need to conserve energy through better management of various operations in the industry, from the optimal utilization of the forest residues to the shipment of the final product. The total energy concept, e.g., energy generation, distribution and utilization in Indian paper industry is discussed. The need for an energy audit is emphasized and the formats of energy reporting forms are included. Short and long term measures to be enforced to achieve energy savings in the pulp and paper mills are outlined. Some important energy conservation approaches are also discussed. Factors affecting energy efficiency in a pulp and paper mill are reviewed. Some areas where sustained R and D efforts should be focused to make the paper industry nearly self-sufficient in energy generation and utilization are also given. It is essential to have a National Energy Policy clearly defining achievable targets of energy conservation for industry. The Indian paper industry could advantageously form its own committee to review the operation of the various mills in the country and come out with concrete solutions for higher energy efficiency and more effective conservation of energy.

  10. Global energy-momentum conservation in general relativity

    International Nuclear Information System (INIS)

    Nissani, N.; Leibowitz, E.

    1989-01-01

    It is shown that there exists a family of coordinate systems in which the energy-momentum tensor is globally conserved. Furthermore, this preferred class of frames includes geodesic systems with respect to any arbitrary point or timelike geodesic line. This implies a physically satisfactory conservation law with no need to introduce an extraneous pseudotensor

  11. State energy conservation plan for New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The energy-savings and energy-management programs set up by state agencies in New Mexico are presented. Also the energy-savings and energy-management programs for public schools are presented. Plans and summaries are also given for the following program: solar water heaters for secondary schools; solar portable classroom demonstration; energy-savings and energy-management programs for county and municipal governments; energy-savings programs for commercial and residential sectors; weatherization; solar sustenance; energy-savings programs for hospitals and industrial buildings; carpools and vanpools; a program encouraging compliance with the national 55-mph speed limit; waste-oil recycling; utilitites; agriculture; procurement; modification; public information; and an administrative packet containing information on how to facilitate internal accounting procedures.

  12. Energy demand : analysis, management and conservation

    International Nuclear Information System (INIS)

    Munasinghe, Mohan

    1990-01-01

    The papers in this book are expected make useful contributions to energy research and policy whether they are driven with the objective of augmenting supplies to reduce oil dependence, to increase the economic benefit per unit of energy consumed, or to reduce the impact of energy use on the environment. Papers relevant to INIS subject scopes are indexed separately. (original)

  13. Distributed Energy Resource (DER) Cybersecurity Standards

    Energy Technology Data Exchange (ETDEWEB)

    Saleem, Danish [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Johnson, Jay [Sandia National Laboratories

    2017-11-08

    This presentation covers the work that Sandia National Laboratories and National Renewable Energy Laboratory are doing for distributed energy resource cybersecurity standards, prepared for NREL's Annual Cybersecurity & Resilience Workshop on October 9-10, 2017.

  14. Energy conservation status in Taiwanese food industry

    International Nuclear Information System (INIS)

    Ma, Chih-Ming; Chen, Ming-Hue; Hong, Gui-Bing

    2012-01-01

    The food industry in Taiwan is labor intensive, the cost of raw materials is high, and there is much product diversification. Although this industry is primarily small and medium scale, it is a large user of electricity in Taiwan's manufacturing sector. The concentration of greenhouse gases (GHGs) from manufacturing activities and vehicle emissions has increased remarkably. Energy audits are a basic and direct means by which energy efficiency can be improved, energy consumption reduced, and carbon dioxide emissions inhibited. This work summarizes the energy saving potential of 76 firms and the energy savings implemented by 23 firms as determined by energy audit tracking and from the on-line energy declaration system in Taiwan's food industry. The results of this study can serve as a benchmark for developing a quantified list in terms of potential energy savings and opportunities for improving the efficiency of the food industry. - Highlights: ► This work summarizes the energy saving potential and the energy savings implemented in food industry. ► The results of this study can serve as a benchmark for developing a quantified list in terms of potential energy savings. ► The opportunities for improving the efficiency of the food industry can be a reference.

  15. Energy conservation: a requirement of the present time

    International Nuclear Information System (INIS)

    Alcoforado, Fernando Antonio Goncalves

    1993-01-01

    The origins of the financial crisis that affects the Brazilian electrical sector is presented. The options available to overcome this situation and the role played by energy conservation are described. 7 refs

  16. Energy conservation campaign at Sandvik AB in Sandviken

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Rune

    1979-07-01

    Sandvik AB's performed an analysis showing oil consumption for steam production was increasing considerably. Energy conservation measures were implemented to decrease the oil consumption and to make lasting changes.

  17. Balancing act: Government roles in an energy conservation network

    NARCIS (Netherlands)

    Peterman, A.; Kourula, A.; Levitt, R.

    2014-01-01

    Government-led interorganizational alliance networks present a sensible opportunity to overcome many societal challenges through collaborative governance. In particular, few researchers have studied alliance networks in the field of energy conservation in commercial buildings—a sector with unique

  18. Energy conservation in French industry and at Rhone-Poulenc

    Energy Technology Data Exchange (ETDEWEB)

    Mongon, A.

    1979-07-01

    Thirteen examples are given to illustrate France's energy conservation program. The examples show the most efficient way of energy sources management, the application of the process optimization's method, and the use of control equipment for process and heating. The details on how energy is used rationally at Rhone-Poulenc are presented.

  19. Basic Energy Conservation and Management--Part 2: HVAC

    Science.gov (United States)

    Krueger, Glenn

    2012-01-01

    Reducing school district energy expenditures has become a universal goal, and new technologies have brought greater energy efficiencies to the school environment. In Part 1 of this two-part series, the author discussed the steps required to establish an energy conservation and management program with an emphasis on lighting. In this article, he…

  20. Energy Conservation. The Best of ERIC, Number 19.

    Science.gov (United States)

    ERIC Clearinghouse on Educational Management, Eugene, OR.

    The 13 articles in this annotated bibliography cover a wide range of concerns from the finances of energy conservation to solar energy applications, to building design, to building maintenance, and to the role of the science teacher as an energy analyst and activist. (IRT)

  1. The animal feed and energy conservation properties of Avotan (Avoparcin)

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, C W [Strathclyde Univ., Glasgow (United Kingdom); O` Beirne, P [Cyanamid (United Kingdom) Ltd. (United Kingdom). Animal Health Div.

    1994-12-31

    AVOTAN, avoparcin is a glycopeptide antibiotic manufactured by Cyanamid (UK) via the fermentation of a strain of Streptomyces candidus. The gross energy requirement of manufacturing avoparcin is calculated and compared with the gross energy savings of feed utilisation when used in animal feeding regimes for broiler chickens, pigs, beef cattle and dairy cows for milk production. Avoparcin improves farm animal production in terms of liveweight gains and feed conversion efficiency. So, by conserving animal feed it conserves the energy which would have been expended to produce that animal feed. The energy savings thus calculated range from one to two orders of magnitude on an energy ratio basis and so are very significant. The widespread use of avoparcin in world agriculture is therefore very beneficial in an energy conservation context. (Author)

  2. Economics of Energy Conservation: A Case Study

    OpenAIRE

    Gunatilake, Herath; Padmakanthi, Dhammika

    2008-01-01

    Global energy security relies heavily on exhaustible fossil fuels, whose use contributes significantly to global environmental problems. The recent unprecedented rise in oil prices and the threat of global warming highlight the urgent need for solutions to the energy and environment problem. Shifting to clean renewable energy sources - the long-term solution - has been slow despite efforts of the global community since the 1970s. Demand side management (DSM) is part of the solution to the ene...

  3. Marketing energy conservation options to Northwest manufactured home buyers

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, P.L.; Mohler, B.L.; Taylor, Z.T.; Lee, A.D.; Onisko, S.A.

    1985-06-01

    This study relies on extensive, existing survey data and new analyses to develop information that would help design a marketing plan to achieve energy conservation in new manufactured homes. Existing surveys present comprehensive information about regional manufactured home occupants and their homes that are relevant to a potential conservation marketing plan. An independent analysis of the cost-effectiveness of various efficiency improvements provides background information for designing a marketing plan. This analysis focuses on the economic impacts of alternative energy conservation options as perceived by the home owner. Identifying impediments to conservation investments is also very important in designing a marketing plan. A recent report suggests that financial constraints and the need for better information and knowledge about conservation pose the major conservation investment barriers. Since loan interest rates for new manufactured homes typically exceed site-built rates by a considerable amount and the buyers tend to have lower incomes, the economics of manufactured home conservation investments are likely to significantly influence their viability. Conservation information and its presentation directly influences the manufactured home buyer's decision. A marketing plan should address these impediments and their implications very clearly. Dealers express a belief that consumer satisfaction is the major advantage to selling energy efficient manufactured homes. This suggests that targeting dealers in a marketing plan and providing them direct information on consumers' indicated attitudes may be important. 74 refs.

  4. Environmental protection through energy conservation: A free lunch at last?

    International Nuclear Information System (INIS)

    Ruff, L.E.

    1990-01-01

    A cautious analysis of demand-side management programs is presented. Utility demand-side management (DSM) programs deserve to be given full and careful consideration as a potential way to give consumers better end-use energy services for their money, utilities an edge in an increasingly competitive market, and society a way to reduce the environmental costs of energy production. But in each of these areas, DSM programs offer no free lunches and have no inherent advantages over supply-side programs. If energy conservation makes sense on economic and business grounds, it can meet the standard economic and business tests applied to most of the rest of the economy; it neither requires nor deserves to be exempt from market concepts and disciplines. If utility DSM programs make sense on environmental grounds, they should be able to demonstrate their cost-effectiveness relative to other, primarily supply-side measures society is willing to undertake in order to control environmental effects. Subsidizing DSM measures in the hope that something good will happen far upstream can waste much money and cause disappointment and frustration

  5. Environmental assessment. Energy efficiency standards for consumer products

    Energy Technology Data Exchange (ETDEWEB)

    McSwain, Berah

    1980-06-01

    The Energy Policy and Conservation Act of 1975 requires DOE to prescribe energy efficiency standards for 13 consumer products. The Consumer Products Efficiency Standards (CPES) program covers: refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners (cooling and heat pumps), furnaces, dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers. This Environmental Assessment evaluates the potential environmental and socioeconomic impacts expected as a result of setting efficiency standards for all of the consumer products covered by the CPES program. DOE has proposed standards for eight of the products covered by the Program in a Notice of Proposed Rulemaking (NOPR). DOE expects to propose standards for home heating equipment, central air conditioners (heat pumps only), dishwashers, television sets, clothes washers, and humidifiers and dehumidifiers in 1981. No significant adverse environmental or socioeconomic impacts have been found to result from instituting the CPES.

  6. Bibliography for transportation energy conservation. [578 citations

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, Sarah J.

    1976-05-01

    A listing is given of 578 reports, books, articles, and conference papers on transportation and energy. Coverage is primarily on U. S. developments and research from 1970 to 1975. Following a section of citations of general works on energy, the bibliography contains two main parts: ''Energy for Transportation'' and ''Transportation of Energy.'' Within each of these topics the arrangement is multimodal (at the urban, regional, national, or international level), then by mode. Selected information sources are listed in the last part. Within each section, entries are arranged alphabetically by author or, lacking an author, by title. References were drawn from the Transportation Center Library collection and other libraries in the Northwestern University system. An earlier bibliography, Transportation and Energy, compiled by the Transportation Center Library in March 1974, forms the basis for the arrangement and provides coverage from 1970 to 1973.

  7. Balancing energy conservation and occupant needs in ventilation rate standards for Big Box stores and other commercial buildings in California. Issues related to the ASHRAE 62.1 Indoor Air Quality Procedure

    Energy Technology Data Exchange (ETDEWEB)

    Mendell, Mark J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Apte, Mike G. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2010-10-31

    This report considers the question of whether the California Energy Commission should incorporate the ASHRAE 62.1 ventilation standard into the Title 24 ventilation rate (VR) standards, thus allowing buildings to follow the Indoor Air Quality Procedure. This, in contrast to the current prescriptive standard, allows the option of using ventilation rate as one of several strategies, which might include source reduction and air cleaning, to meet specified targets of indoor air concentrations and occupant acceptability. The research findings reviewed in this report suggest that a revised approach to a ventilation standard for commercial buildings is necessary, because the current prescriptive ASHRAE 62.1 Ventilation Rate Procedure (VRP) apparently does not provide occupants with either sufficiently acceptable or sufficiently healthprotective air quality. One possible solution would be a dramatic increase in the minimum ventilation rates (VRs) prescribed by a VRP. This solution, however, is not feasible for at least three reasons: the current need to reduce energy use rather than increase it further, the problem of polluted outdoor air in many cities, and the apparent limited ability of increasing VRs to reduce all indoor airborne contaminants of concern (per Hodgson (2003)). Any feasible solution is thus likely to include methods of pollutant reduction other than increased outdoor air ventilation; e.g., source reduction or air cleaning. The alternative 62.1 Indoor Air Quality Procedure (IAQP) offers multiple possible benefits in this direction over the VRP, but seems too limited by insufficient specifications and inadequate available data to provide adequate protection for occupants. Ventilation system designers rarely choose to use it, finding it too arbitrary and requiring use of much non-engineering judgment and information that is not readily available. This report suggests strategies to revise the current ASHRAE IAQP to reduce its current limitations. These

  8. Energy conservation and the residential and commercial sector

    Science.gov (United States)

    1975-01-01

    A detailed analysis of energy conservation actions relevant to the residential and commercial sector has led to the conclusion that the potential for savings is great. The task will not be easy, however, since many of the actions require significant life style changes that are difficult to accomplish. Furthermore, many of the conservation actions cited as instant solutions to the energy crisis are those with only mid to long term potential, such as solar energy or heat pumps. Three significant conservation approaches are viable: adjusting price structure, mandating actions, and educating consumers. The first two appear to be the most feasible. But they are not without a price. Higher utility bills adversely affect the poor and the elderly on fixed incomes. Likewise, strict mandatory measures can be quite distasteful. But the effect of alternatives, such as voluntary savings accomplished through education processes, is minimal in a nation without a true conservation ethic.

  9. Consumer energy conservation options - professional and consumer perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Ritchie, B.J.R.; Claxton, J.D.; McDougall, G.H.G.

    1980-01-01

    The objectives of this study were to: identify government policies for reducing Canadian consumption of home heating fuel, electricity, and gasoline; assess probable effectiveness of different policy alternatives as a means of reducing consumer energy consumption; and measure the acceptability to Canadian consumers of the different policy alternatives. Interviews were conducted with energy conservation professionals to identify and evaluate existing energy conservation programs, and interviews were conducted with consumers who had evaluated selected programs previously reviewed by the professionals. Information was also gathered on energy conservation activities of consumers surveyed. A directory of 34 energy conservation programs was also compiled. Some of the conclusions reached in this report are as follows. There is a need for an information system to gather data on existing conservation programs in order to increase the knowledge of relevant parties as to the outcomes of operating programs. This would help evaluation and improvement of current programs and suggest new program possibilities. The professionals rated six of the 34 programs highly, including the Energuide and the Canadian Home Insulation Program (CHIP). Retrofitting programs for houses are recommended for continuation and expansion, with some consideration given to linking these kinds of programs with home audit programs. In the private transport sector, any new conservation programs should be thoroughly tested on a small scale before widespread implementation, as evidence indicates that certain programs favorably evaluated by professionals may not be received favorably by consumers. 3 refs., 24 tabs.

  10. Overview topic paper on mass media energy conservation communications

    Energy Technology Data Exchange (ETDEWEB)

    Vertinsky, P; Vertinsky, I

    1979-02-01

    The utilization of information diffusion strategies to increase energy conservation knowledge and practices among the general population in Canada is discussed in terms of 5 media functions: information dissemination, remedial behavior modification, lifestyle decisions, initiating conservation action, and crisis management. Each of these functions is critically addressed in terms of media mix, message content and form, timing and intensity, exposure, and specific target populations. The diffusion strategies are then organized into a matrix of policy options to enable the appropriate one to be selected. Four major categories of energy conservation information considered are the nature of the energy problem, methods of conservation, results of conservation, and the individual consumer decision-making process. Heavy television exposure suggests this medium has enormous potential for informing Canadians on conservation issues. Print seems to be the main source of detailed, specialized, and sophisticated kinds of information. However, despite wide media availability, large numbers of the population consistently escape contact with widely reported information. Behavioral modification to change undesirable energy habits is examined from the perspectives of initial change and cultural/social change required to sustain new lifestyles. The use of mass media during crisis situations may be of essential importance for implementation of future energy policies. Information dissemination and responses to the mass media do not appear to have the same patterns during crisis and non-crisis situations. 279 refs.

  11. Recovery Act. Development of a Model Energy Conservation Training Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-07-05

    The overall objective of this project was to develop an updated model Energy Conservation training program for stationary engineers. This revision to the IUOE National Training Fund’s existing Energy Conservation training curriculum is designed to enable stationary engineers to incorporate essential energy management into routine building operation and maintenance tasks. The curriculum uses a blended learning approach that includes classroom, hands-on, computer simulation and web-based training in addition to a portfolio requirement for a workplace-based learning application. The Energy Conservation training program goal is development of a workforce that can maintain new and existing commercial buildings at optimum energy performance levels. The grant start date was July 6, 2010 and the project continued through September 30, 2012, including a three month non-funded extension.

  12. A compendium of energy conservation: Success stories 90

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  13. A Compendium of Energy Conservation: Success Stories 90

    Science.gov (United States)

    1990-12-01

    The Department of Energy's (DOE) Office of Conservation and Renewable Energy proudly presents this summary of some its most successful projects and activities. The projects included in this document have made significant contributions to improving energy efficiency and fuel flexibility in the United States. The energy savings that can be realized from these projects are considerable. Americans have shown an impressive ability to reduce energy consumption since 1973. Studies show that 34 quadrillion Btus (quads) of energy were saved in 1988 alone as a result of energy conservation and other factors. These savings, worth approximately $180 billion, represent more energy than the United States obtains from any other single source. The availability of new, energy-efficient technologies has been an important ingredient in achieving these savings. Federal efforts to develop and commercialize energy-saving technologies and processes are a part of the reason for this progress. Over the past 10 years, DOE has carefully invested more than $2 billion in hundreds of research and development (R&D) projects to ensure the availability of advanced technology in the marketplace. These energy-efficient projects are carried out through DOE's Office of Conservation and Renewable Energy and reflect opportunities in the three energy-consuming, end-use sectors of the economy: buildings, transportation, and industry.

  14. Essentials of energy technology sources, transport, storage, conservation

    CERN Document Server

    Fricke, Jochen

    2013-01-01

    An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

  15. 77 FR 24940 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2012-04-26

    ... 5-year average ratio with heating oil prices published in the Monthly Energy Review, but the propane... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program... and Renewable Energy, Department of Energy. ACTION: Notice. SUMMARY: In this notice, the U.S...

  16. Energy conservation in the EC glass industry

    Energy Technology Data Exchange (ETDEWEB)

    Waal, H. de [TNO Institute of Applied Physics, Delft (Netherlands)

    1994-12-31

    The data presented in this survey are based mainly on a recent study, performed by the Energy Technology Support Unit ETSU. Harwell Laboratory, United Kingdom, in the context of the EC-Thermie programme. Also, use has been made of a paper `Glass Manufacture, energy and CO{sub 2}-emissions`, presented by G.J. Copley of the British Glass Manufacturers Confederation, Sheffield, United Kingdom, presented at the Thermie Seminar in Wiesbaden, 1992. A third source of information has been the data collected by the CPIV, the European Glass Manufacturers Federation on the present and future economic situation of the EC Glass Industry. (orig.)

  17. Conservation of topological quantum numbers in energy bands

    International Nuclear Information System (INIS)

    Chang, L.N.; Liang, Y.

    1988-01-01

    Quantum systems described by parametrized Hamiltinians are studied in a general context. Within this context, the classification scheme of Avron-Seiler-Simon for non-degenerate energy bands is extended to cover general parameter spaces, whole their sum rule is generalized to cover cases with degenerate bands as well. Additive topological quantum numbers are defined, and these are shown to be conserved in energy band ''collisions''. The conservation laws dictate that when some invariants are non-vanishing, no energy gap can develop in a set of degenerate bands. This gives rise to a series of splitting rules

  18. Conservation and Renewable Energy Program: Bibliography, 1988 edition

    Energy Technology Data Exchange (ETDEWEB)

    Vaughan, K.H. (comp.)

    1988-04-01

    The 831 references covering the period 1980 through Feb. 1988, are arranged under the following: analysis and evaluation, building equipment, building thermal envelope systems and materials, community systems and cogeneration, residential conservation service, retrofit, advanced heat engine ceramics, alternative fuels, microemulsion fuels, industrial chemical heat pumps, materials for waste heat utilization, energy conversion and utilization materials, tribology, emergency energy conservation,inventions, electric energy systems, thermal storage, biofuels production, biotechnology, solar technology, geothermal, and continuous chromatography in multicomponent separations. An author index is included.

  19. Conservation law of plants' energy value dependence of plants ...

    African Journals Online (AJOL)

    The plants differences in biochemical composition are analyzed, and the conservation law of energy value in plants is obtained. The link between the need for the nutrients and the plants biochemical composition is examined, Liebig's law is specified. Keywords: plant's biochemical composition, biochemistry, energy value in ...

  20. 77 FR 54839 - Energy Efficiency and Conservation Loan Program

    Science.gov (United States)

    2012-09-06

    ... CFR Parts 1710, 1717, 1721, 1724, and 1730 RIN 0572-AC19 Energy Efficiency and Conservation Loan..., proposing policies and procedures for loan and guarantee financial assistance in support of energy efficiency programs (EE Programs) sponsored and implemented by electric utilities for the benefit of rural...

  1. Conservation of Mechanical and Electric Energy: Simple Experimental Verification

    Science.gov (United States)

    Ponikvar, D.; Planinsic, G.

    2009-01-01

    Two similar experiments on conservation of energy and transformation of mechanical into electrical energy are presented. Both can be used in classes, as they offer numerous possibilities for discussion with students and are simple to perform. Results are presented and are precise within 20% for the version of the experiment where measured values…

  2. Energy conservation techniques as innovations, and their diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Darley, J M

    1978-04-01

    Many effective products, procedures, and techniques for achieving energy conservation have been discovered by researchers. This paper focuses on the conditions under which these procedures and techniques will be adopted voluntarily. It is suggested, first, that an economic incentive for the utilization of those energy-conserving techniques is not a sufficient condition for their adoption, and second, that a psychologically-based theory of the diffusion of innovation will identify the critical variables for promoting the adoption of energy-conserving products and techniques. Based on preliminary, small-scale observations of homeowners' reactions to a complex, time-controlled thermostat, the initial parameters of a diffusion theory for energy innovation are suggested.

  3. Conservation and human rights: the need for international standards

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, Gonzalo [International Union for the Conservation of Nature (International organizations without location); Pabon, Luis [The Nature Conservancy (United States); Painter, Michael; Redford, Kent [The Wildlife Conservation Society (United States); Siegele, Linda [Foundation for International Environmental Law and Development (United Kingdom); Springer, Jenny [WWF-US (United States); Thomas, David [Birdlife International (International organizations without location); Painemilla, Kristen Walker [Conservation International (United States); Roe, Dilys

    2010-05-15

    Conservation doesn't happen in a vacuum. In recent years, awareness has grown of the relationship of international conservation practice to indigenous peoples and local communities, and especially the links between conservation and human rights. The impacts protected areas can have on rural communities – such as evictions and lost access to natural resources – are now under particular scrutiny. Concern is meanwhile rising over the human rights implications of some climate change mitigation and adaptation measures. But awareness is also growing of the positive contributions of nature conservation to the rights of people to secure their livelihoods, enjoy healthy and productive environments, and live with dignity. International NGOs can play a central role in supporting and promoting conservation actions that respect the rights of indigenous peoples and local communities, and help sustain their livelihoods. Many conservation organisations have long worked towards this. It is vital that they hold to consistent principles and implement measures that ensure their application, so their action on conservation remains accountable, transparent and sustainable.

  4. To conserve, or not to conserve ... : Large eddy simulation of wind farms with energy-conserving schemes

    NARCIS (Netherlands)

    Mehta, D.

    2016-01-01

    This thesis concerns the industrial application of large eddy simulation to wind farm aerodynamics. Through a series of simple tests, it presents the pros and cons of using energy-conserving time integration and furthers the importance of a dissipation-free spatial discretisation. Finally, it

  5. 1999 annual progress report -- Energy conservation team

    Energy Technology Data Exchange (ETDEWEB)

    Chalk, S. (EERE OTT Office of Advanced Automotive Technologies Energy Conversion Team Leader)

    1999-10-19

    This report highlights progress achieved during FY 1999 under the Light-duty Fuels Utilization R and D Program. The program is comprised of two elements: the Advanced Petroleum-Based APB Fuels Program which focused on developing and testing advanced fuels for use with compression-ignition direct-injection (CIDI) engines and fuel cells and the Alternative Fuels Program which focused on Natural gas and natural gas derived fuels. The report contains 17 summaries of industry and National Laboratory projects. Fuel efficient vehicles with very low emissions are essential to meet the challenges of climate change, energy security, and improved air quality. The authors anticipate cooperative efforts with the auto and energy industries to develop new and innovative technologies that will be used to make advanced transportation vehicles that are fuel efficient, clean, and safe.

  6. Towards a Sustainable Energy Balance: Progressive Efficiency and the Return of Energy Conservation

    Energy Technology Data Exchange (ETDEWEB)

    Diamond, Rick; Harris, Jeff; Diamond, Rick; Iyer, Maithili; Payne, Christopher; Blumstein, Carl; Siderius, Hans-Paul

    2007-08-13

    We argue that a primary focus on energy efficiency may not be sufficient to slow (and ultimately reverse) the growth in total energy consumption and carbon emissions. Instead, policy makers need to return to an earlier emphasis on"conservation," with energy efficiency seen as a means rather than an end in itself. We briefly review the concept of"intensive" versus"extensive" variables (i.e., energy efficiency versus energy consumption), and why attention to both consumption and efficiency is essential for effective policy in a carbon- and oil-constrained world with increasingly brittle energy markets. To start, energy indicators and policy evaluation metrics need to reflect energy consumption as well as efficiency. We introduce the concept of"progressive efficiency," with the expected or required level of efficiency varying as a function of house size, appliance capacity, or more generally, the scale of energy services. We propose introducing progressive efficiency criteria first in consumer information programs (including appliance labeling categories) and then in voluntary rating and recognition programs such as ENERGY STAR. As acceptance grows, the concept could be extended to utility rebates, tax incentives, and ultimately to mandatory codes and standards. For these and other programs, incorporating criteria for consumption as well as efficiency offers a path for energy experts, policy-makers, and the public to begin building consensus on energy policies that recognize the limits of resources and global carrying-capacity. Ultimately, it is both necessary and, we believe, possible to manage energy consumption, not just efficiency in order to achieve a sustainable energy balance. Along the way, we may find it possible to shift expectations away from perpetual growth and toward satisfaction with sufficiency.

  7. Can energy conservation and religion mix

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J

    1987-08-01

    Many churches share problems of inefficient heating systems, drafty windows, high ceilings, and poor insulation. The author has devised a four-stage method to evaluate the energy efficiency of a religious building and to develop recommendations for improvement. The suggested payback period is four years or less. This article describes the proposed method and highlights a successful project in Oshawa, Ontario as an example.

  8. Energy conservation in industry; Energibesparelser i erhvervslivet

    Energy Technology Data Exchange (ETDEWEB)

    Johanson, M. (Dansk Energi Analyse A/S (Denmark)); Maagoee Petersen, P. (Viegand and Maagoee ApS (Denmark))

    2010-02-15

    The report describes the completed survey and the methodology used for the analysis of energy saving opportunities and potentials for processing technologies and equipment in the industry. The report also includes a total of fourteen technology descriptions, of which eleven relate to end use of energy, while the three descriptions are for cross-technologies. The technology descriptions analyse any significant savings opportunities in the processing technologies concerned and work out the potentials of 'here and now' cost savings, with 2, 4 and 10-year payback time, respectively. The survey makes it possible to prioritize the instruments with the shortest payback times. The total savings potential for the eleven end-use technologies is estimated to be 10% at 2 years of payback time, 15% at four year payback time, and 32% at the 10 year payback time. The percentage potential is somewhat greater for the end-use technologies using electricity than the end-use which mainly uses fuel. That the potential is less for fuel-based end-use technologies may be explained by the fact that they are key processes that are regularly upgraded to increase product quality, to reduce production time and waste, etc. Such improvements also help to save energy and means that further improvements are relatively expensive. (ln)

  9. Energy efficiency and conservation in Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Samarasekura, S W.R.

    1983-01-01

    Sri Lanka is a tropical, predominantly agricultural island with a mixed population. The economy is rapidly expanding since 1977. So far the country is self-sufficient in rice, which is the staple food of the population. Indiscriminate cutting of forests for firewood resulted in a disastrous upsetting of the rain pattern. The existing capacity of hydro-electric power plants is not adequate to meet the demands of the rapidly growing industries and of households where the use of appliances increases dramatically with the progress of the economy. Periodic cut-offs of electric power supply became necessary. These are very harmful to industry. In order to keep the balance of payments in equilibrium, the government is fostering the development of new sources of foreign income, such as tourism and export of gems and spices. Remedies used to master the energy crisis are: the building of new hydroelectric plants, reforestation; introduction of ''kerosene stamps'' which will restrict the sale of this product at subsidized prices to the needy only; encouraging the use of fuel-efficient motorcycles in preference to automobiles; introduction (in cooperation with Honda) of alcohol-powered motorcycles; appointment of a Ministerial Committee endowed with broad powers to formulate and implement national energy policy. Although the general energy situation in Sri Lanka is rather bleak for the moment, it is confidently hoped that these measures will bear fruit in the long run.

  10. Promoting energy conservation in the rural areas

    International Nuclear Information System (INIS)

    Taale, K.D.

    2001-01-01

    It is estimated that more than 70% of the population of Ghana live in the rural areas. Cooking and heating in these areas are mainly achieved by fuelwood and other biomass. Although wood is a renewable energy resource, this is only so if it is grown faster than it is consumed. Firewood consumption exceeds forest growth in Ghana and other developing countries. Added to this, is the fact that the World's wood resource is used for such purposes as sawn timber, clearing of land and felling trees for agricultural purposes, etc. If our forests are to be preserved it is this population that has to be targeted. One method of reducing fuelwood demand is to encourage alternative supplies such as biogas (methane). Rural populations could be mobilized to construct bio-latrines in their communities to make use of the biogas generated to cook their food and also for heating purposes. Through levies, funds could be generated to undertake such projects in each community. Before this could be possible, a lot of education will have to be undertaken by the Renewable Energy unit of the Ministry of Mines and Energy. This is because many people are apprehensive of the idea of cooking with gas derived from their own feces. Some of the benefits to be derived from such a project are the use of the effluent slurry as high quality organic manure for farming. This will surely lead to increase food production and help to keep the environment clean (au)

  11. Conservation of energy and momentum in nonrelativistic plasmas

    International Nuclear Information System (INIS)

    Sugama, H.; Watanabe, T.-H.; Nunami, M.

    2013-01-01

    Conservation laws of energy and momentum for nonrelativistic plasmas are derived from applying Noether's theorem to the action integral for the Vlasov-Poisson-Ampère system [Sugama, Phys. Plasmas 7, 466 (2000)]. The symmetric pressure tensor is obtained from modifying the asymmetric canonical pressure tensor with using the rotational symmetry of the action integral. Differences between the resultant conservation laws and those for the Vlasov-Maxwell system including the Maxwell displacement current are clarified. These results provide a useful basis for gyrokinetic conservation laws because gyrokinetic equations are derived as an approximation of the Vlasov-Poisson-Ampère system.

  12. Energy Conservation of the Designated Government Buildings in Thailand

    Directory of Open Access Journals (Sweden)

    Wangskarn Prapat

    2016-01-01

    Full Text Available The designated government buildings have implemented and administered energy program under the energy development and promotion Act 2007 for many years continuously until 2015. Appointment person responsible for energy, performing energy management and implementing the energy conservation work plan and measures are legal requirements for the designated buildings. Therefore, the ministry of Energy has launched the project to support the implementation of energy management. The aim of the project was to create the energy management system in the designated government buildings, and to reduce energy consumption. In this paper, the evaluation of the project has been presented from the achievements of 839 designated government buildings. The energy saving is more than 440 ktoe/year. This is about 3% of energy consumptions of buildings.

  13. Energy conserving site design case study: Shenandoah, Georgia. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The case study examines the means by which energy conservation can be achieved at an aggregate community level by using proper planning and analytical techniques for a new town, Shenandoah, Georgia, located twenty-five miles southwest of Atlanta's Hartsfield International Airport. A potentially implementable energy conservation community plan is achieved by a study team examining the land use options, siting characteristics of each building type, alternate infrastructure plans, possible decentralized energy options, and central utility schemes to determine how community energy conservation can be achieved by use of pre-construction planning. The concept for the development of mixed land uses as a passively sited, energy conserving community is based on a plan (Level 1 Plan) that uses the natural site characteristics, maximizes on passive energy siting requirement, and allows flexibility for the changing needs of the developers. The Level 2 Plan is identical with Level 1 plan plus a series of decentraized systems that have been added to the residential units: the single-family detached, the apartments, and the townhouses. Level 3 Plan is similar to the Level 1 Plan except that higher density dwellings have been moved to areas adjacent to central site. The total energy savings for each plan relative to the conventional plan are indicated. (MCW)

  14. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M. (Dansk Energi Analyse A/S, Frederiksberg (Denmark)); Langkilde, G.; Olesen, Bjarne W. (Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark)); Moerck, O. (Cenergia Energy Consultants, Herlev (Denmark)); Sundman, O. (DONG Energy, Copenhagen (Denmark)); Engelund Thomsen, K. (Aalborg Univ., SBi, Hoersholm (Denmark))

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  15. Energy performance contracting - energy saving potential of selected energy conservation measures (ECM)

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, M [Dansk Energi Analyse A/S, Frederiksberg (Denmark); Langkilde, G; Olesen, Bjarne W [Technical Univ. of Denmark, ICIEE, Kgs. Lyngby (Denmark); Moerck, O [Cenergia Energy Consultants, Herlev (Denmark); Sundman, O [DONG Energy, Copenhagen (Denmark); Engelund Thomsen, K [Aalborg Univ., SBi, Hoersholm (Denmark)

    2008-09-15

    This report has been developed under the research project 'Etablering af grundlag for energitjenester i Danmark' (project number: ENS-33031-0185) under the Danish research programme - EFP. The objective of this project has been to contribute to the utilisation of the large potential for energy conservations in the building sector within the public, industry and service sectors through the development of a better basis for decision making for both the Energy Service Companies (ESCOes) and the building owners. The EU directive on Energy Service Contracting points at the buildings as the area where the biggest potential market for energy services and energy efficiency improvements are. The EFP-project has two parts: (1) A Danish part and (2) participation in the international cooperation project 'Holistic Assesment Tool-Kit on Energy Efficient Retrofit Measures for Government Buildings (EnERGo)', Annex 46 under the IEA R and D program 'Energy Conservation In Buildings And Community Systems' (ECBCS). This report describes the Danish contributions to the IEA projects subtask B, which has a primary objective to develop a database of energy conservation measures (ECM) with descriptions and performance characteristics of these. (au)

  16. A new mechanism for energy conservation technology services

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Feng

    1996-12-31

    In the ninth-five year plan of China, the socialist market economy model will be developed. In the stage of transferring from planning economy to market economy, the energy conservation technology services industry in China has met new challenges. Over the past ten to fifteen years, there has developed a new mechanism for financing energy efficiency investments in market economies. The process is simple. After inspecting an enterprise or an entity for energy saving opportunities, an Energy Service Company (ESCO) which business aimed at making money will review the recommended energy conservation opportunities with the enterprise or the entity (user) and implement those measures acceptable to the user at no front end cost to the user. The ESCO then guarantees that the energy savings will cover the cost of the capital renovations using the Performance Contracting.

  17. Transportation energy conservation data book: edition I. 5

    Energy Technology Data Exchange (ETDEWEB)

    Shonka, D B; Loebl, A S; Ogle, M C; Johnson, M L; Howard, E B

    1977-01-01

    This document contains statistical information on the major transportation modes, their respective energy consumption patterns, and other pertinent factors influencing performance in the transportation sector. Data relating to past, present, and projected energy use and conservation in the transportation sector are presented under seven chapter headings. These focus on (1) modal transportation characteristics, (2) energy characteristics of the transportation sector, (3) energy conservation alternatives involving the transportation sector, (4) government impacts on the transportation sector, (5) the supply of energy to the transportation sector, (6) characteristics of transportation demand, and (7) miscellaneous reference materials such as energy conversion factors and geographical maps. References are included for each set of data presented, and a more general bibliography is included at the end of the book. In addition, a glossary of key terms and a subject index is provided for the user. A second edition of this document is scheduled for publication in September 1977.

  18. Energy conservation investments: A comparison between China and the US

    International Nuclear Information System (INIS)

    Lin, Jiang

    2007-01-01

    Growth in energy consumption in China has soared from 2001 to 2004, driven largely by a booming economy and heavy investment in infrastructure and housing. In response, China has poured billions of dollars of investment in building power plants-at a rate of one large power plant (1000 MW) per week. In fact, China in 2004 has added the entire generating capacity of California or Spain in a single year. In contrast, investment in energy conservation projects has weakened considerably in recent years. This paper examines trends in energy efficiency investments in China and the US. The comparison highlights the potential of energy conservation investments in addressing China's current energy crisis as well as the inadequacy of such investments in China. Finally, the paper outlines a few scenarios for appropriate levels of investments in energy efficiency in China in the future

  19. Energy conservation through more efficient lighting.

    Science.gov (United States)

    Maya, J; Grossman, M W; Lagushenko, R; Waymouth, J F

    1984-10-26

    The efficiency of a mercury-rare gas electrical discharge, which forms the basis of a fluorescent lamp, can be increased about 5 percent simply by increasing the concentration of mercury-196 from 0.146 percent (natural) to about 3 percent. These findings can be implemented immediately without any significant change in the process of manufacturing of this widely used source of illumination, provided that mercury-196 can be obtained economically. The potential energy savings for the United States are estimated to be worth in excess of $200 million per year.

  20. 75 FR 27170 - Energy Conservation Program for Consumer Products: Determination Concerning the Potential for...

    Science.gov (United States)

    2010-05-14

    ... Points for a 203-Watt Multiple-Voltage EPS for a Video Game Console Efficiency- Reference point for... would likely benefit economically from the imposition of energy conservation standards for non-Class A... projected savings and national NPV considers only the direct financial costs and benefits to consumers of...

  1. Energy literacy, awareness, and conservation behavior of residential households

    International Nuclear Information System (INIS)

    Brounen, Dirk; Kok, Nils; Quigley, John M.

    2013-01-01

    The residential sector accounts for one-fifth of global energy consumption, resulting from the requirements to heat, cool, and light residential dwellings. It is therefore not surprising that energy efficiency in the residential market has gained importance in recent years. In this paper, we examine awareness, literacy and behavior of households with respect to their residential energy expenditures. Using a detailed survey of 1721 Dutch households, we measure the extent to which consumers are aware of their energy consumption and whether they have taken measures to reduce their energy costs. Our results show that “energy literacy” and awareness among respondents is low: just 56% of the respondents are aware of their monthly charges for energy consumption, and 40% do not appropriately evaluate investment decisions in energy efficient equipment. We document that demographics and consumer attitudes towards energy conservation, but not energy literacy and awareness, have direct effects on behavior regarding heating and cooling of the home. The impact of a moderating factor, measured by thermostat settings, ultimately results in strong variation in the energy consumption of private consumers. - Highlights: • We use a detailed survey of 1,721 Dutch households to measure awareness and conservation behavior in energy consumption. • Energy literacy and awareness among residential households is low. • 40 percent of the sample does not appropriately evaluate investment decisions in energy efficient equipment • Demographics and consumer attitudes affect behavior regarding heating and cooling of a home

  2. 75 FR 13123 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2010-03-18

    ... that of heating oil, based on the 2004-2008 averages for these two fuels. The source for these price... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program... and Renewable Energy, Department of Energy. ACTION: Notice. SUMMARY: In this notice, the U.S...

  3. Airplane energy use and conservation strategies

    Energy Technology Data Exchange (ETDEWEB)

    Pilati, D.A.

    1974-05-01

    Domestic commercial airplane fuel use is examined as a function of stage length. A fuel use model is developed using the eight most popular airplanes. Short flights are very fuel inefficient; a 100-mile flight consumes 2.5 times as much fuel per passenger-mile than a 1,000-mile flight. Half of today's flights are for distances under 260 miles. Fuel consumption for purposes other than flying directly between airports is examined. Over 10% of total fuel use is for those portions of the flight in which no enroute distance is achieved. Delays account for at least 4.2% of the fuel consumption and auxiliary power units use over 1%. Fuel requirements for attempting to recover lost time and for fuel ferrying are also discussed. Airplane fuel efficiency can be increased in the short term by operational changes, particularly by increasing the load factor. A load factor increase from 50 to 60% would reduce airplane fuel use by 16% for the same traffic. Other options include reducing cruise speeds, increasing cruise altitudes, and changing ground operations. Each of these strategies offer savings of 1 to 3%. Total transportation energy use can be reduced by shifting air passengers to ground modes, especially for the inefficient short-stage traffic. Net energy savings for diverting half the flights under 200 miles to buses or trains is equivalent to 6% of the fleet fuel use. (6 tables, 6 fig., 36 references)

  4. Key role for nuclear energy in global biodiversity conservation.

    Science.gov (United States)

    Brook, Barry W; Bradshaw, Corey J A

    2015-06-01

    Modern society uses massive amounts of energy. Usage rises as population and affluence increase, and energy production and use often have an impact on biodiversity or natural areas. To avoid a business-as-usual dependence on coal, oil, and gas over the coming decades, society must map out a future energy mix that incorporates alternative sources. This exercise can lead to radically different opinions on what a sustainable energy portfolio might entail, so an objective assessment of the relative costs and benefits of different energy sources is required. We evaluated the land use, emissions, climate, and cost implications of 3 published but divergent storylines for future energy production, none of which was optimal for all environmental and economic indicators. Using multicriteria decision-making analysis, we ranked 7 major electricity-generation sources (coal, gas, nuclear, biomass, hydro, wind, and solar) based on costs and benefits and tested the sensitivity of the rankings to biases stemming from contrasting philosophical ideals. Irrespective of weightings, nuclear and wind energy had the highest benefit-to-cost ratio. Although the environmental movement has historically rejected the nuclear energy option, new-generation reactor technologies that fully recycle waste and incorporate passive safety systems might resolve their concerns and ought to be more widely understood. Because there is no perfect energy source however, conservation professionals ultimately need to take an evidence-based approach to consider carefully the integrated effects of energy mixes on biodiversity conservation. Trade-offs and compromises are inevitable and require advocating energy mixes that minimize net environmental damage. Society cannot afford to risk wholesale failure to address energy-related biodiversity impacts because of preconceived notions and ideals. © 2014 The Authors Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

  5. 18 CFR 38.2 - Incorporation by reference of North American Energy Standards Board Wholesale Electric Quadrant...

    Science.gov (United States)

    2010-04-01

    ... reference of North American Energy Standards Board Wholesale Electric Quadrant standards. 38.2 Section 38.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY... UTILITIES § 38.2 Incorporation by reference of North American Energy Standards Board Wholesale Electric...

  6. Generating heavy particles with energy and momentum conservation

    Science.gov (United States)

    Mereš, Michal; Melo, Ivan; Tomášik, Boris; Balek, Vladimír; Černý, Vladimír

    2011-12-01

    We propose a novel algorithm, called REGGAE, for the generation of momenta of a given sample of particle masses, evenly distributed in Lorentz-invariant phase space and obeying energy and momentum conservation. In comparison to other existing algorithms, REGGAE is designed for the use in multiparticle production in hadronic and nuclear collisions where many hadrons are produced and a large part of the available energy is stored in the form of their masses. The algorithm uses a loop simulating multiple collisions which lead to production of configurations with reasonably large weights. Program summaryProgram title: REGGAE (REscattering-after-Genbod GenerAtor of Events) Catalogue identifier: AEJR_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJR_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 1523 No. of bytes in distributed program, including test data, etc.: 9608 Distribution format: tar.gz Programming language: C++ Computer: PC Pentium 4, though no particular tuning for this machine was performed. Operating system: Originally designed on Linux PC with g++, but it has been compiled and ran successfully on OS X with g++ and MS Windows with Microsoft Visual C++ 2008 Express Edition, as well. RAM: This depends on the number of particles which are generated. For 10 particles like in the attached example it requires about 120 kB. Classification: 11.2 Nature of problem: The task is to generate momenta of a sample of particles with given masses which obey energy and momentum conservation. Generated samples should be evenly distributed in the available Lorentz-invariant phase space. Solution method: In general, the algorithm works in two steps. First, all momenta are generated with the GENBOD algorithm. There, particle production is modeled as a sequence of two

  7. Energy conservation and fuel substitution in Ube Kosan

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    After describing various changes in the Ube Kosan of Japan, an account is given of the history of the energy changeover and conservation being promoted by this company, together with details of the results of these measures and the company structures involved. Topics mentioned include imports of coal, the changeover to coal as a heat source in the production of cement and for the company's private power generation, the establishment of a coal centre, the organization of the drive towards energy conservation, the adoption of the SAVE technique, feedstock substitution, and the state of development of new processes.

  8. Energy conservation in ethanol production from renewable resources and non-petroleum energy sources

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-01

    The dry milling process for the conversion of grain to fuel ethanol is reviewed for the application of energy conservation technology, which will reduce the energy consumption to 70,000 Btu per gallon, a reduction of 42% from a distilled spirits process. Specific energy conservation technology applications are outlined and guidelines for the owner/engineer for fuel ethanol plants to consider in the selection on the basis of energy conservation economics of processing steps and equipment are provided. The process was divided into 5 sections and the energy consumed in each step was determined based on 3 sets of conditions; a conventional distilled spirits process; a modern process incorporating commercially proven energy conservation; and a second generation process incorporating advanced conservation technologies which have not yet been proven. Steps discussed are mash preparation and cooking, fermentation, distillation, and distillers dried grains processing. The economics of cogeneration of electricity on fuel ethanol plants is also studied. (MCW)

  9. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

    Science.gov (United States)

    Abbas, Zeeshan; Yoon, Wonyong

    2015-01-01

    The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP) machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE), and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT. PMID:26404275

  10. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

    Directory of Open Access Journals (Sweden)

    Zeeshan Abbas

    2015-09-01

    Full Text Available The Internet of Things (IoT is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE, and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT.

  11. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects.

    Science.gov (United States)

    Abbas, Zeeshan; Yoon, Wonyong

    2015-09-25

    The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving issues. This paper presents a comprehensive survey on energy conserving issues and solutions in using diverse wireless radio access technologies for IoT connectivity, e.g., the 3rd Generation Partnership Project (3GPP) machine type communications, IEEE 802.11ah, Bluetooth Low Energy (BLE), and Z-Wave. We look into the literature in broad areas of standardization, academic research, and industry development, and structurally summarize the energy conserving solutions based on several technical criteria. We also propose future research directions regarding energy conserving issues in wireless networking-based IoT.

  12. The status of energy conservation in Taiwan's cement industry

    International Nuclear Information System (INIS)

    Su, Te-Li; Chan, David Yih-Liang; Hung, Ching-Yuan; Hong, Gui-Bing

    2013-01-01

    The cement industry represents one of the most energy intensive sectors in Taiwan. Energy audits are the direct tools which are employed to help reduce energy consumption. The objectives of energy audits are to establish energy audit systems, provide on-site energy audit service and reduce production cost. This study summarized the energy savings implemented in Taiwan's cement industry; the data were obtained from the on-line Energy Declaration System in 2010. The total implemented energy savings amounted to 68,512 kilo liter of crude oil equivalent (KLOE). The energy audit group audited seven Taiwanese cement plants in 2011 and revealed an energy saving potential of 2571.6 MWh of electricity and 1002.8 KLOE of thermal energy. The total potential energy saving was 1708.5 KL of crude oil equivalent (KLOE), equivalent to a 4560 t reduction in CO 2 emissions, representing the annual CO 2 absorption capacity of a 122 ha forest plantation. - Highlights: • This study summarizes the energy savings implemented in Taiwan's cement industry from the on-line Energy Declaration System. • The energy audit group audited seven Taiwanese cement plants in 2011 and revealed energy saving potential was 1708.5 KLOE. • This work aims to examine what Taiwan has done and also describes the current status in cement industry. • In addition, some potential energy conservation opportunities or measures are revealed in this paper

  13. Managing post-therapy fatigue for cancer survivors using energy conservation training.

    Science.gov (United States)

    Yuen, Hon Keung; Mitcham, Maralynne; Morgan, Larissa

    2006-01-01

    This pilot study evaluated the effectiveness of energy conservation training to help post-therapy cancer survivors manage their fatigue. Twelve post-therapy cancer survivors were randomly assigned to an energy conservation training or usual care control (6 in each group). Participants in the intervention group received 1 to 2 hours of individual, face-to-face energy conservation training from an occupational therapist followed by once-a-week telephone monitoring sessions in the subsequent three weeks. Participants in the control group received standard care from their oncologist. Analysis of pre- and post-training data from the Piper Fatigue Scale (PFS) revealed significant reduction only in the sensory subscale of the PFS (Z = 2.21; p = 0.027) for the intervention group; but no significant reduction in the four subscale or total scores of the PFS for the control group. Findings demonstrate partial support for the effectiveness of energy conservation training in helping post-therapy cancer survivors manage their fatigue. Energy conservation training seems to be a viable strategy for managing cancer-related fatigue, though its efficacy is modest. Incorporating specific energy restoration strategies such as relaxation and meditation for future research may help advance the growing body of knowledge in symptom management for post-therapy cancer survivors.

  14. Energy conservation: an alternative for investment in the oil sector for OPEC member countries

    International Nuclear Information System (INIS)

    Zamani, M.

    2005-01-01

    Investment in the oil sector is the main policy of expanding net crude oil export capacity in OPEC Member Countries. The other alternative should be improving energy conservation policies. Since these countries benefit from cheap energy sources, it is reasonable to expect inefficient use of energy in their economies, resulting in relatively high energy intensity. This paper deals with the causality relationship between energy consumption and gross domestic product (GDP). First, stationary tests are run. Second, if there is a cointegrating relationship, an error correction model is applied; otherwise a standard Granger causality test is conducted. It was discovered that for all OPEC Member Countries we cannot statistically accept causality running from energy to GDP. Therefore, not only are proper conservation policies not a threat to economic growth, they also lead to an expansion of oil export capacity. (author)

  15. A Survey on Energy Conserving Mechanisms for the Internet of Things: Wireless Networking Aspects

    OpenAIRE

    Zeeshan Abbas; Wonyong Yoon

    2015-01-01

    The Internet of Things (IoT) is an emerging key technology for future industries and everyday lives of people, where a myriad of battery operated sensors, actuators, and smart objects are connected to the Internet to provide services such as mobile healthcare, intelligent transport system, environmental monitoring, etc. Since energy efficiency is of utmost importance to these battery constrained IoT devices, IoT-related standards and research works have focused on the device energy conserving...

  16. Energy conservation in developing countries using green building idea

    International Nuclear Information System (INIS)

    Rashid, Akram; Qureshi, Ijaz Mansoor

    2013-01-01

    Green buildings uses processes that are environmentally responsible and resource-efficient throughout a building's life-cycle. In these buildings Certain energy conservative and environment friendly steps are considered and implemented from design, construction, operation, maintenance and renovation. In present era no doubt new technologies are constantly constructed and used in creating greener structures, energy efficient buildings. The common objective is to reduce the overall impact of the built environment on human health using available energy efficiently. To increase the efficiency of the System or the building, Onsite generation of renewable energy through solar power, wind power, hydro power, or biomasscan significantly reduce the environmental impact of the building. Power generation is generally the most expensive feature to add to a building. Any how power generation using renewable sources that is Solar system may further enhance energy conservation ideas. Power Factor improvement can also be another source of efficient tool for efficient use of Electrical Energy in green buildings. In developing countries a significant amount of Electrical Energy can be conserved and System efficiency as a whole can be increased by Power Factor correction. The reverse flow of power can be locally engaged instead of creating extra stress and opposition to the existing grid lines.

  17. Operation of buildings: Energy supply and energy conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    Kraft, H

    1985-01-01

    Energy saving in public administration. A list-like collection of the measures to monitor the consumption, the measures of saving energy at existing buildings, new systems and by new techniques. Examples with figures for the savings achieved in the region of Marburg-Biedenkopf (Hesse). Guidelines are set up which are mainly based on energy saving, heat recovery, use of new technologies and renewable energy sources, fluidized-bed combustion also in smaller plants of ca. 2 MW, waste management separating wastes into burnable/unburnable, information of the public administration and the people and the setting up of energy concepts. (PJH).

  18. Energy audit: potential of energy - conservation in Jordanian ceramic industry

    International Nuclear Information System (INIS)

    Adas, H.; Taher, A.

    2005-01-01

    This paper represents the findings of the preliminary energy-audits performed by the Rational Use of Energy Division at the National Energy Research Center (NERC), as well as the findings of a detailed energy-audit carried out in the largest Ceramic plant in Jordan (Jordan Ceramic industries).These studies were preceded by a survey of the ceramic factories in Jordan. The survey was carried out in 1997. The performed preliminary energy-audits showed that an average saving-potential in most of theses plants is about 25 % of the total energy-bills in these plants, which constitutes a considerable portion of the total production-cost. This fact was verified through the detailed energy-audit performed by NERC team for the largest Ceramic Plant in Jordan in June 2003, which showed an energy-saving potential of about 30 %. This saving can be achieved by some no-cost or low-cost measures, in addition to some measures that need reasonable investments with an average pay-back period of about two years. This detailed energy-audit covered electrical systems, refrigeration systems, compressed-air systems, and kilns. The results of the detailed energy-audit can be disseminated to other Ceramic plant, because of the similarity in the production process between these plants and the plant where the detailed energy-audit was carried out. (author)

  19. Jersey City energy conservation demonstration program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Newbold, R.F.

    1978-08-01

    The Aerospace Corporation, the City Government, and the Board of Education of Jersey City have conducted a group of energy-conservation experiments to explore a number of conservation techniques believed to offer quick payback and to be of wide applicability. Experiments include the updating and/or rehabilitation of the energy-consuming features of old buildings and installation of devices designed to minimize energy losses caused by human error or laxity. Specific examples include: upgrading of the deteriorated and inefficient steam-distribution system of the city hall (originally constructed in 1894); an extensive program of reducing infiltration in an old school building; use of several timing devices in connection with heating, ventilation, and lighting systems to encourage energy-conservation practices; retrofit of school classrooms with high-pressure sodium lamps; and demonstration of practical and cost-effective ways of increasing the efficiency of conventional steam boilers. The report presents: the nature of the selected experiments; technical, human, and organizational factors that proved significant in performing and evaluating the experiments; discussions of observations and lessons learned; and general recommendations for an extended program of energy conservation in local governments. It is emphasized that, in retrofit of existing buildings, the unexpected is commonplace; and the habits and attitudes of building occupants are elements of the system that must always be taken into account. This report shows the benefits of energy saving, cost saving, and added comfort that may be attained by retrofitting old buildings, noting typical complications that arise. The effectiveness of the conservation methods is presented in terms of costs relative to effective payback periods calculated from results of their application in Jersey City.

  20. Energy conservation and dust production in wet rotary cement kilns

    Energy Technology Data Exchange (ETDEWEB)

    Sell, N J; Fischbach, F A

    1976-12-01

    Energy conservation is currently a major concern of the cement industry. A comparison of data supplied by the U.S. Federal Energy Administration with that gathered in an extensive private study incorporating 29 wet cement plants indicates that a significant reduction of the energy consumed can be accomplished by decreasing the amount of dust generated in the process. Energy saving of 8 percent through dust suppression appears possible by increasing the slurry moisture and by using hammermills rather than impactors as the crushing technique.

  1. The role of energy conservation in the BFKL equation

    International Nuclear Information System (INIS)

    Forshaw, J.R.; Harriman, P.N.; Sutton, P.J.

    1993-01-01

    We study a modification to the BFKL equation at zero momentum transfer due to the imposition of energy conservation. The significance of our modification, which enters in the form of an ultraviolet cutoff, is illustrated directly and is discussed within the context of the gluon diffusion in k T . (Author)

  2. 41 CFR 101-25.112 - Energy conservation policy.

    Science.gov (United States)

    2010-07-01

    ... Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS SUPPLY AND PROCUREMENT 25-GENERAL 25.1... procurement and property management documents reflect the policy set forth in paragraph (b) of this section... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Energy conservation...

  3. Energy conservation law for randomly fluctuating electromagnetic fields

    International Nuclear Information System (INIS)

    Gbur, G.; Wolf, E.; James, D.

    1999-01-01

    An energy conservation law is derived for electromagnetic fields generated by any random, statistically stationary, source distribution. It is shown to provide insight into the phenomenon of correlation-induced spectral changes. The results are illustrated by an example. copyright 1999 The American Physical Society

  4. A Quantification of the Energy Savings by Conservation Voltage Reduction

    NARCIS (Netherlands)

    Ellens, W.; Berry, A.; West, S.

    2013-01-01

    The introduction of `Smart grid' technologies in the electricity supply industry has attracted new attention to Conservation Voltage Reduction (CVR). CVR is a method that aims to save energy by reducing the voltage level of the electrical distribution network. However, not all devices consume less

  5. Administrative memo relative to the delivery of energy conservation certificates

    International Nuclear Information System (INIS)

    2006-07-01

    This memo details the principles of the energy conservation certificates, the law texts of application, the part of the Government and the ADEME services, the certificates demand procedure, and the inscription of the certificates on the national registries. (A.L.B.)

  6. Seeding Social Norms about Energy Conservation among Girl Scouts

    Science.gov (United States)

    Bernstein, Debra; Puttick, Gillian

    2014-01-01

    Three studies examined whether a social norm message (SNM) to Girl Scouts who had completed an energy conservation program would impact behavior and attitudes. Studies 1 and 2 were conducted with girls recently completing the program, study 3 was conducted with girls completing the program one year earlier. Results suggest that the SNM may impact…

  7. The Energy Conservation Guide 98/99; ENOEK guiden 99

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    Norwegians have the world's largest electricity consumption per capita. This booklet aims to advice house owners on efficient use of energy. The main sections discuss the concept of energy conservation in general, heating, stoves and fireplaces, central heating, insulation and sealing, windows, hot water, water saving, lighting, domestic appliances, ventilation, outdoor facilities, and finally gives some tips on investments and profitability and how to obtain expert advice. The booklet is profusely illustrated.

  8. Exactly energy conserving semi-implicit particle in cell formulation

    International Nuclear Information System (INIS)

    Lapenta, Giovanni

    2017-01-01

    We report a new particle in cell (PIC) method based on the semi-implicit approach. The novelty of the new method is that unlike any of its semi-implicit predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. Recent research has presented fully implicit methods where energy conservation is obtained as part of a non-linear iteration procedure. The new method (referred to as Energy Conserving Semi-Implicit Method, ECSIM), instead, does not require any non-linear iteration and its computational cycle is similar to that of explicit PIC. The properties of the new method are: i) it conserves energy exactly to round-off for any time step or grid spacing; ii) it is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency and allowing the user to select any desired time step; iii) it eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length; iv) the particle mover has a computational complexity identical to that of the explicit PIC, only the field solver has an increased computational cost. The new ECSIM is tested in a number of benchmarks where accuracy and computational performance are tested. - Highlights: • We present a new fully energy conserving semi-implicit particle in cell (PIC) method based on the implicit moment method (IMM). The new method is called Energy Conserving Implicit Moment Method (ECIMM). • The novelty of the new method is that unlike any of its predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. • The new method is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency. • The new method eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length. • These

  9. Exactly energy conserving semi-implicit particle in cell formulation

    Energy Technology Data Exchange (ETDEWEB)

    Lapenta, Giovanni, E-mail: giovanni.lapenta@kuleuven.be

    2017-04-01

    We report a new particle in cell (PIC) method based on the semi-implicit approach. The novelty of the new method is that unlike any of its semi-implicit predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. Recent research has presented fully implicit methods where energy conservation is obtained as part of a non-linear iteration procedure. The new method (referred to as Energy Conserving Semi-Implicit Method, ECSIM), instead, does not require any non-linear iteration and its computational cycle is similar to that of explicit PIC. The properties of the new method are: i) it conserves energy exactly to round-off for any time step or grid spacing; ii) it is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency and allowing the user to select any desired time step; iii) it eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length; iv) the particle mover has a computational complexity identical to that of the explicit PIC, only the field solver has an increased computational cost. The new ECSIM is tested in a number of benchmarks where accuracy and computational performance are tested. - Highlights: • We present a new fully energy conserving semi-implicit particle in cell (PIC) method based on the implicit moment method (IMM). The new method is called Energy Conserving Implicit Moment Method (ECIMM). • The novelty of the new method is that unlike any of its predecessors at the same time it retains the explicit computational cycle and conserves energy exactly. • The new method is unconditionally stable in time, freeing the user from the need to resolve the electron plasma frequency. • The new method eliminates the constraint of the finite grid instability, allowing the user to select any desired resolution without being forced to resolve the Debye length. • These

  10. Energy conservation and energy prices: the Hungarian experience

    International Nuclear Information System (INIS)

    Molnar, L.

    1997-01-01

    The main sources of emissions into the outdoor air are from the energy sector (e.g. power plants), industry, the transport sector and the residential sector (buildings). The danger from most of these emissions is the fact that heat plants and boilers of residential buildings in particular, are usually in the areas where people live and work and therefore their emissions may have a direct effect on health. The best way to improve this situation - to diminish emissions and to improve air quality - is to increase the efficiency of both energy production and use. This also has important consequences for the economic use of the national energy carrier stock and diminishes the need to import energy which increases the competitiveness of goods produced. The Hungarian government has set out an Energy Saving Programme to address, among other things the fact that the Hungarian average energy consumption per capita is less than the EU average but the energy intensity (the necessary energy to produce 1 USD GDP) is 3.5-4.0 times higher than the EU average. It has been shown that the best way to save energy is to invest in energy-conscious behaviour and training. Recent studies in public and residential buildings have shown that there is a potential for high energy saving in Hungarian buildings which is independent from the building technology used. Also, the pay-back times of investment in the building envelope are significantly higher than the pay-back times of investment in heating-ventilating or control systems, while the energy saved was of the same magnitude. (author) 5 figs., 5 tabs., 6 refs

  11. Going Green Doesn't Have to Be Sexy: Lakeland Community College's Practical Approach to Addressing Energy Conservation and Sustainability

    Science.gov (United States)

    Mayher, Michael E.

    2010-01-01

    Lakeland Community College is recognized for its energy conservation leadership in Ohio and nationally. The college's program will detail the practical, incremental approach taken in Lakeland's "Energy Journey." Setting the standard statewide, that journey recently resulted in a sustainable, guaranteed reduction of energy use by 40%.

  12. Combining interviewing and modeling for end-user energy conservation

    International Nuclear Information System (INIS)

    Goldblatt, David L.; Hartmann, Christoph; Duerrenberger, Gregor

    2005-01-01

    Studying energy consumption through the lens of households is an increasingly popular research avenue. This paper focuses on residential end-user energy conservation. It describes an approach that combines energy modeling and in-depth interviews for communicating about energy use and revealing consumer preferences for change at different levels and intervention points. Expert knowledge was embodied in a computer model for householders that calculates an individual's current energy consumption and helps assess personal savings potentials, while also bringing in socio-technical and economic elements beyond the user's direct control. The paper gives a detailed account of this computer information tool developed for interviewing purposes. It then describes the interview guidelines, data analysis, and main results. In general, interview subjects overestimated the environmental friendliness of their lifestyles. After experience with the program, they tended to rate external (technological, societal) factors as somewhat stronger determinants of their consumption levels than personal (behavioral and household investment) factors, with the notable exception of mobility. Concerning long-term energy perspectives, the majority of subjects felt that society has the ability to make a collective choice towards significantly lower energy consumption levels. Interviewees confirmed that the software and interactive sessions helped them think more holistically about the personal, social, and technological dimensions of energy conservation. Lessons can be applied to the development of future energy communication tools

  13. Conservation of lily plants. Energy conservation by decreasing circulation; Bewaring van lelieplantgoed. Energiebesparing door vermindering van de circulatie

    Energy Technology Data Exchange (ETDEWEB)

    Wildschut, J.; Gude, H. Sector Bloembollen, Bomen en Fruit, Praktijkonderzoek Plant en Omgeving PPO, Lisse (Netherlands)); Braam, G.; Vasen, R.; Van Diepen, G. [DLV Plant, Wageningen (Netherlands)

    2010-03-15

    By far the most important energy consuming aspect in cultivating lilies is the use of electricity for refrigeration and circulation during storage in the period November until April. The aim of this study is to arrive at standards for refrigeration and ventilation that result in maximum energy conservation without affecting the quality of the lily plants. As for reduced circulation, a comparison has also been made of the on/off control and the frequency control [Dutch] De veruit belangrijkste energiepost bij de teelt van lelies is het verbruik van elektriciteit voor koeling en circulatie tijdens de bewaring van november t/m april. Doel van dit onderzoek is om voor circulatie en ventilatie tot normen te komen waarmee maximaal op energie wordt bespaard zonder dat dit ten koste gaat van de kwaliteit van het lelieplantgoed. Voor de verminderde circulatie is hierbij ook een vergelijking gemaakt tussen de aan/uit regeling en de frequentieregeling.

  14. Skating on Thin Ice: Evolution of Conservation in Energy Policy

    Science.gov (United States)

    Gibbons, Jack

    2009-05-01

    Why are we physicists so often drawn into the nexus of energy policy and governance? There are several explanations. First, we are quite accustomed to this phenomenon of ``cause and effect,'' so we instinctively examine those two ends as well as the connections between them (i.e., what happens between a lump of coal and a light bulb). That way of thinking makes energy production and consumption intiminately connected and ``conservation'' naturally becomes a technological strategy rather than an appendage. Strangely, however, ``conservation'' in our society (called ``The Cowboy Economy'' by economist Kenneth Boulding) has been widely interpreted as competitive with supply and ridiculed as only a minor option, entailing denial of an amenity. After nearly a half-century of dialogue, innovation, and frustration, the rationality of what I call the ``physics'' perspective seems to have come of age. The evolution of relevant science and technology and public policy has advanced markedly, reflected and sustained at the national level by a succession of organizations. The Congressional Office of Technology Assessment, the Federal Office of Energy Conservation, the Federal Energy Administration, the U.S. Department of Energy, and the Office of Science and Technology Policy. Not surprisingly, physicists continue to play key roles in the inculcation of science and analysis into the policy and governance. This requires, as implied by C.P. Snow, a bridging and strengthening of the thin ice between science and society. We still have a long road to travel.

  15. Conserving energy in new buildings: analysis of nonregulatory policies

    Energy Technology Data Exchange (ETDEWEB)

    Scheer, R.M.; Nieves, L.A.; Mazzucchi, R.P.

    1981-05-01

    The costs and effectiveness of non-regulatory options relative to those of a regulatory approach are analyzed. Nonregulatory program alternatives identified are: information and education programs, tax incentives and disincentives, and mortage and finance programs. Chapter 2 briefly reviews survey data to assess present public awareness of energy issues and energy-efficient building design. Homebuyer and homebuilder surveys are reviewed and conservation motivations are discussed. Chapter 3 examines the provision of technical and economic information to various factors affecting building design decisions. This approach assumes that the economic incentives and technical means to achieve energy conservation goals already exist but that critical information is lacking. Chapter 4 examines how adjustments to the tax structure could enhance economic incentives and counter economic disincentives for energy conservation. Qualifying buildings for tax benefits would almost certainly require certification of design energy consumption. The effectiveness of tax incentives would depend in part on dissemination of public information regarding the incentives. Chapter 5 examines subsidies, such as subsidized mortgages and loan guarantees, which lower the cost of money or other costs but do not change the market structure facing the consumer. Certification that buildings qualify for such treatment would probably be required. Chapter 6 presents recommendations based on the study's findings. (MCW)

  16. Policy study: energy conservation in transportation in Puerto Rico

    Energy Technology Data Exchange (ETDEWEB)

    Mayda, J

    1978-09-01

    The present study is an initial effort to apply social system analysis to transportation energy conservation, in order to prepare the ground for a team effort of transportation and energy specialists, regional planners, policy analysis and generalists, and government administrators - with additional imputs from commerce, industry and the community at large. The task of this study has been to inventory the principal factors and inputs in the field of transportation energy demand and possible conservation, estimate their magnitudes and relations, and arrange in a tentative but reasoned pattern - where there were before only so many scattered data, technical studies with a limited focus, sectoral programs and decisions, and vague impressions about the serviceability, the impacts and the social value of the product.

  17. NCSU solar energy and conservation house. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-01

    A passive solar energy house has been built adjacent to the NCSU McKimmon Continuing Education Center. The house contains a two-story embedded sunspace, two Trombe walls, active solar hot water heating, thermal storage in a rock filled ceiling/floor, and numerous research treatments, and energy conservation features. (See attached photo brochure; Appendix 1). The house is completely decorated and furnished in an attractive manner and the exterior architecture is traditional and has broad consumer appeal. It is also thoroughly instrumented to monitor performance. The house is open to the public on weekends and numerous people come to visit on their own initiative and others take advantage of the close proximity to McKimmon while there attending conferences. The house will influence and motivate large numbers of people to consider solar and energy conservation facets in their homes and will provide data to substantiate performance to prospective home buyers and meaningful data on design and construction for builders.

  18. Status and Analysis on Effects of Energy Efficiency Standards for Industrial Boilers in China

    Science.gov (United States)

    Liu, Ren; Chen, Lili; Liu, Meng; Ding, Qing; Zhao, Yuejin

    2017-11-01

    Energy conservation and environmental protection is the basic policy of China, and is an important part of ecological civilization construction. The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers.

  19. A policy of nuclear energy or energy conservation - on the construction of a wrong alternative

    International Nuclear Information System (INIS)

    Traube, K.

    1981-01-01

    From the content: a secret good-bye - wrong information from the energy experts - is there any priority for the efficient utilization of energie - do nuclear energy and energy conservation measures complement each other - the hidden socio-political dimensions - counter-information is necessary. (HP) [de

  20. Targeting water and energy conservation using big data

    Science.gov (United States)

    Escriva-Bou, A.; Pulido-Velazquez, M.; Lund, J. R.

    2016-12-01

    Water conservation is often the most cost effective source of additional water supply for water stressed regions to maintain supply reliability with increasing population and/or demands, or shorter-term droughts. In previous research we demonstrated how including energy savings of conserved water can increase willingness to adopt conservation measures, at the same time that increases energy and GHG emissions savings. But the capacity to save water, energy and GHG emissions depends fundamentally in the economic benefits for customers and utilities. Utilities have traditionally used rebates, subsidies or incentives to enhance water conservation. But the economic benefits originated by these rebates depend on the actual savings of the water, energy and GHG emissions. A crucial issue that is not considered in the financial analysis of these rebates is the heterogeneity in water consumption, resulting in rebating households that actually do not need improvements in certain appliances. Smart meters with end-use disaggregation allow to consider this heterogeneity and to target rebates. By using an optimization approach that minimizes water and energy residential costs—accounting for retrofit costs and individual benefits according to previous levels of consumption—we are able to assess economically optimal rebate programs both for customers and utilities. Three programs are considered: first, same economic incentives are provided to all households and then they do their optimal decisions; second, traditional appliance-focused rebates are assessed; and third, utilities provide only rebates to those households that maximize water, energy or GHG emissions savings. Results show that the most economically efficient options for households are not the best options for utilities, and that traditional appliance-focused rebates are much less optimal than targeted rebates.

  1. Energy conservation and the environment: conflict or complement

    Energy Technology Data Exchange (ETDEWEB)

    Schipper, L.

    1978-09-01

    The policy discussion following the Oil Embargo was clouded with fears of a return to a primitive existence based on drastically reduced energy inputs to society, or, on the other hand, an abandoning of environmental goals, allegedly a major barrier to development of new energy supplies. Often the energy use associated with environmental improvements was cited as a reason for expanding energy supplies, as if to say that a conflict existed between a clean environment and reductions in energy use. Or it was argued that a relaxation of environmental goals would lower the direct costs of harvesting and using energy and thereby alleviate the need for energy conservation. It has also been argued that the geopolitics of energy alone will force us to substitute riskier or ''dirtier'' energy sources for relatively clean oil and gas. Indeed, there is no question that the relationship among energy, the environment, and economic well-being is complicated. This essay sorts out many of the confusing aspects in order to show how goals relating to the efficient use of energy are aligned both with traditional economic goals and with modern environmental goals. To do this the author analyzes in depth the role of energy in the economy and, using examples, traces the origins of many of the misconceptions about that role--misconceptions that have inhibited a profound discussion of energy-related goals.

  2. Gyrokinetic energy conservation and Poisson-bracket formulation

    International Nuclear Information System (INIS)

    Brizard, A.

    1989-01-01

    An integral expression for the gyrokinetic total energy of a magnetized plasma, with general magnetic field configuration perturbed by fully electromagnetic fields, was recently derived through the use of a gyrocenter Lie transformation. It is shown that the gyrokinetic energy is conserved by the gyrokinetic Hamiltonian flow to all orders in perturbed fields. An explicit demonstration that a gyrokinetic Hamiltonian containing quadratic nonlinearities preserves the gyrokinetic energy up to third order is given. The Poisson-bracket formulation greatly facilitates this demonstration with the help of the Jacobi identity and other properties of the Poisson brackets

  3. Conservation and solar energy program: congressional budget request, FY 1982

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-01-01

    Funding summaries are presented for the Conservation and Solar Energy Program funding information and program overview on energy conservation (Volume 7 of 7, DOE/CR-0011/2) are included for the Buildings and Community Systems, Industrial, Transportation; State and Local, Multi-Sector, Energy Impact Assistance, and Residential/Commercial retrofit programs. Funding information and program overviews on solar technology (Volume 2 of 7, DOE/CR-011/2) are included for Active and Passive Solar Heating and Cooling, Photovoltaics Energy Systems, Solar Thermal Power Systems, Biomass Energy Systems, Wind Energy Conversion Systems, Ocean Systems, Solar International Activities, Solar Information Systems, SERI Facility, MX-RES, Program Direction, and Alcohol Fuels programs. Information and overviews on energy production, demonstration, and distribution (Volume 6 of 7, DOE/CR-0011/2) are given for the solar program. A funding summary and a program overview are included for electrochemical and physical and chemical storage systems as appearing in DOE/CR-0011/2, Volume 3 of 7. Relevant tabulated data from the FY 1981. Request to the Congress are presented for Supplementals, Rescissions, and Deferrals. (MCW)

  4. Statistical mechanical foundation of the peridynamic nonlocal continuum theory: energy and momentum conservation laws.

    Science.gov (United States)

    Lehoucq, R B; Sears, Mark P

    2011-09-01

    The purpose of this paper is to derive the energy and momentum conservation laws of the peridynamic nonlocal continuum theory using the principles of classical statistical mechanics. The peridynamic laws allow the consideration of discontinuous motion, or deformation, by relying on integral operators. These operators sum forces and power expenditures separated by a finite distance and so represent nonlocal interaction. The integral operators replace the differential divergence operators conventionally used, thereby obviating special treatment at points of discontinuity. The derivation presented employs a general multibody interatomic potential, avoiding the standard assumption of a pairwise decomposition. The integral operators are also expressed in terms of a stress tensor and heat flux vector under the assumption that these fields are differentiable, demonstrating that the classical continuum energy and momentum conservation laws are consequences of the more general peridynamic laws. An important conclusion is that nonlocal interaction is intrinsic to continuum conservation laws when derived using the principles of statistical mechanics.

  5. Potential environmental effects of energy conservation measures in northwest industries

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M C; Gygi, K F; Hendrickson, P L

    1992-01-01

    The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

  6. Encouraging energy conservation in multifamily housing: RUBS and other methods of allocating energy costs to residents

    Energy Technology Data Exchange (ETDEWEB)

    McClelland, L

    1980-10-01

    Methods of encouraging energy conservation in multifamily housing by allocating energy costs to residents are discussed; specifically, methods appropriate for use in master metered buildings without equipment to monitor energy consumption in individual apartments are examined. Several devices available for monitoring individual energy consumption are also discussed plus methods of comparing the energy savings and cost effectiveness of monitoring devices with those of other means of promoting conservation. Specific information in Volume I includes a comparison study on energy use in master and individually metered buildings; types of appropriate conservation programs for master metered buildings; a description of the Resident Utility Billing System (RUBS); energy savings associated with RUBS; Resident reactions to RUBS; cost effectiveness of RUBS for property owners; potential abuses, factors limiting widespread use, and legal status of RUBS. Part I of Volume II contains a cost allocation decision guide and Part II in Volume II presents the RUBS Operations Manual. Pertinent appendices to some chapters are attached. (MCW)

  7. 77 FR 19008 - Guidelines for Home Energy Professionals: Standard Work Specifications for Single Family Energy...

    Science.gov (United States)

    2012-03-29

    .... The development of the Guidelines for Home Energy Professionals: Standard Work Specifications for... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Guidelines for Home Energy Professionals: Standard Work Specifications for Single Family Energy Upgrades AGENCY: Office of Energy...

  8. Volumetric formulation of lattice Boltzmann models with energy conservation

    OpenAIRE

    Sbragaglia, M.; Sugiyama, K.

    2010-01-01

    We analyze a volumetric formulation of lattice Boltzmann for compressible thermal fluid flows. The velocity set is chosen with the desired accuracy, based on the Gauss-Hermite quadrature procedure, and tested against controlled problems in bounded and unbounded fluids. The method allows the simulation of thermohydrodyamical problems without the need to preserve the exact space-filling nature of the velocity set, but still ensuring the exact conservation laws for density, momentum and energy. ...

  9. Energy conservation normatives in Italy: Thermotechnical Committee organizational efforts

    Energy Technology Data Exchange (ETDEWEB)

    Casagrande, A [Comitato Termotecnico Italiano, Milan (Italy)

    1991-10-01

    A recent Italian law (No. 10/91) calls for energy conservation to be implemented in building materials and HVAC systems through the creation of a suitable set of normatives. The CTI (Italian Thermotechnical Committee) has been assigned the task of creating these normatives and is currently in the organizational stage. This paper lists the proposed normatives and reports on CTI's progress in assembling groups of consultants from various sectors - public administration, end users, industrial firms, etc.

  10. Application of economic principles in energy conservation measures

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharyya, A

    1976-01-01

    The point of departure for the selection of any energy-conserving policy is the availability of (at least) two practical options or alternatives for policy maker at enterprise level. In real life, in the same point of time, or in the same geographical location, there could be several energy conservation options for the same industrial process. One need only set up a pairwise comparison of two options at a time and answer the question: which option is the most desirable from the energy conservation standpoint. Which option is the most desirable from the purchaser's point of view. If one takes both these factors into account, which option is socially the most desirable. We have explained two economic techniques (Life Cycle Cost (LCC), Market Acceptance) and their integration to compare two systems at a time. To begin with, a policy maker at enterprise level can carry out LCC. As technology progresses over time, Market Acceptance estimation may be warranted. Finally, Cost-Benefit Analysis may be applied to overall evaluation of competing projects which have involvement of large social groups, and wider foreign exchange implications.

  11. Machine learning of accurate energy-conserving molecular force fields

    Science.gov (United States)

    Chmiela, Stefan; Tkatchenko, Alexandre; Sauceda, Huziel E.; Poltavsky, Igor; Schütt, Kristof T.; Müller, Klaus-Robert

    2017-01-01

    Using conservation of energy—a fundamental property of closed classical and quantum mechanical systems—we develop an efficient gradient-domain machine learning (GDML) approach to construct accurate molecular force fields using a restricted number of samples from ab initio molecular dynamics (AIMD) trajectories. The GDML implementation is able to reproduce global potential energy surfaces of intermediate-sized molecules with an accuracy of 0.3 kcal mol−1 for energies and 1 kcal mol−1 Å̊−1 for atomic forces using only 1000 conformational geometries for training. We demonstrate this accuracy for AIMD trajectories of molecules, including benzene, toluene, naphthalene, ethanol, uracil, and aspirin. The challenge of constructing conservative force fields is accomplished in our work by learning in a Hilbert space of vector-valued functions that obey the law of energy conservation. The GDML approach enables quantitative molecular dynamics simulations for molecules at a fraction of cost of explicit AIMD calculations, thereby allowing the construction of efficient force fields with the accuracy and transferability of high-level ab initio methods. PMID:28508076

  12. Energy conservation in selected buildings, Gdansk. 1. final report

    International Nuclear Information System (INIS)

    1997-02-01

    This Final Report marks the end of the implementation stage of the project: 'Energy Conservation in Selected Buildings in Gdansk, Poland' supported by the Danish Environment-related Energy Sector Programme for Poland under the Danish Energy Agency. The residential and commercial sectors together with public buildings account for 40-45% of the total energy consumption and are dominated by the use of space heating and hot water. The sector has a significant over-consumption of energy, which first of all is due to the lack of or too weak incentives for the individual tenants to decrease the energy consumption. Bad thermal insulation of buildings and inefficient central heating systems with a widespread lack of measurement and automatic control systems give cause for extensive heat losses. The objective of the project has been to document the effects of energy savings in 18 multi-family houses when different types of energy saving measures are applied. These measures include thermal insulation of buildings, refurbishment of the heating system and introduction of individual billing system for heating and hot tap water. Energy audits of 18 buildings were performed by combination of on-site inspection of all buildings and data collection from the available drawings, technical descriptions, etc. The on-site inspection was carried out by use of an energy audit scheme specially developed for this project. (EG)

  13. Energy conservation in selected buildings, Gdansk. 1. final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    This Final Report marks the end of the implementation stage of the project: `Energy Conservation in Selected Buildings in Gdansk, Poland` supported by the Danish Environment-related Energy Sector Programme for Poland under the Danish Energy Agency. The residential and commercial sectors together with public buildings account for 40-45% of the total energy consumption and are dominated by the use of space heating and hot water. The sector has a significant over-consumption of energy, which first of all is due to the lack of or too weak incentives for the individual tenants to decrease the energy consumption. Bad thermal insulation of buildings and inefficient central heating systems with a widespread lack of measurement and automatic control systems give cause for extensive heat losses. The objective of the project has been to document the effects of energy savings in 18 multi-family houses when different types of energy saving measures are applied. These measures include thermal insulation of buildings, refurbishment of the heating system and introduction of individual billing system for heating and hot tap water. Energy audits of 18 buildings were performed by combination of on-site inspection of all buildings and data collection from the available drawings, technical descriptions, etc. The on-site inspection was carried out by use of an energy audit scheme specially developed for this project. (EG)

  14. Towards energy self sufficiency in the North: Energy conservation and forest biomass

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-01

    A symposium was held to address the issues of controlling energy demand through conservation, and increasing the range of energy supply using forest products (biomass) as a renewable alternative to fossil fuels in Canada's northern climates. Sections on retrofitting of thermal insulation, production of wood fuels, and unconventional energy analyses of these technologies are included. Separate abstracts have been prepared for 23 papers.

  15. Application of energy conservation technologies in Indian industries

    International Nuclear Information System (INIS)

    Zubair, K.M.

    1992-01-01

    The quadrupling of oil prices in 1973 signaled the beginning of a crises period for the oil importing countries. It hampered the economic growth of developed and developing countries alike. The pace of industrialization slowed down, recession set in and the oil importing developing nations found their balance of payment situation steadily going worse. The second increase of oil prices in 1979 further compounded the problems. It did seem that the problem of economic growth and increasing debt burden was intractable as far as developing nations were concerned. Behind this turmoil were the faint stirrings of alternative actions that sought to wean the world from its oil and fossil fuel dominated economies. These alternatives ranged from harnessing renewable energy sources, such as solar, wind and biomass to implementing end-use energy efficiency strategies. A major lesson of the oil crunch era was that energy efficiency is tangible resource by itself that competes economically with contemporary energy supply options. In addition to this, four major national priorities, viz, economic competitiveness, utilization of scare capital for development, environmental quality and energy security through oil dependence provided an urgent rationale for saving energy. While conservation consciousness has already taken roots in Pakistan industry, it needs to be nurtured and gains need to be consolidated. The need of the hour is to take stock of the situation elsewhere, particularly in similar geographical and socio-economic situations, and plan for an energy efficient tomorrow. This article attempts to delineate the notable developments that have taken place in the application of energy conservation technologies in the Indian industries. These efforts have had a salutary effect on the Indian value added sector which was saddled with old plant and machinery designed in the era of cheap energy. (author)

  16. Business cycle and economic-wide energy intensity: The implications for energy conservation policy in Algeria

    International Nuclear Information System (INIS)

    Adom, Philip Kofi

    2015-01-01

    Despite the prevalence of voluntary and involuntary energy conservation policies, developing countries in Africa continue to struggle to achieve energy efficiency targets. Consequently, energy intensity levels have risen threatening the security of the energy system. This raises the important question: is there an economic state that induces agents to be energy conscious? In this study, we study the case of Algeria's energy intensity from 1971 to 2010. First, the paper argues that there is a certain economic state that economic agents find investing in energy conservation a viable option. Any state different from that would mean not investing in energy conservation. Second, the paper argues that the economy can do better even with an infinitesimal reduction in fuel subsidy, and that the gains in revenue from the policy can compensate for the negative socio-economic and equity impacts associated with such a policy. Third, the paper argues that, so long as, industrial expansion in the country move parallel with investment in technological innovation, long-term sustainable growth and energy conservation targets are jointly feasible. Fourth, the paper shows that income elasticity evolves with the business cycle, and the absorptive capability of the host country affects how FDI (foreign direct inflows) impact energy intensity. - Highlights: • Low income states inhibit fuel substitution and investment in energy conservation. • Income elasticity evolves as we pass through boom and recessionary periods. • The goals of sustainable growth and energy conservation are not mutually exclusive. • Absorptive capability affects the impact of FDI on energy intensity

  17. Profit by conserving energy in your restaurant. Economies d'energie et profits a la carte

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This manual is aimed at the Canadian restaurant sector with a view of promoting sound energy conservation practices. Monitoring is recommended to identify energy consumption and measure results of a conservation effects. These efforts can be done with respect to selection, operation, and maintenance of restaurant equipment used in food preparation, HVAC systems, refrigeration, water heating, and lighting. Overall building design and planning of new installations are also considered. 27 figs.

  18. Universal standard for the smart energy home

    International Nuclear Information System (INIS)

    Hatler, M.

    2009-01-01

    Smart metering systems are now being installed in countries throughout the world. This article discussed technologies designed to connect in-home electrical devices such as thermostats, energy displays, and computers to the electricity grid. The smart-grid connected devices will form part of the home area network (HAN) designed to provide consumers with real time control of their energy use. Many governments are now mandating the use of HAN interfaces, and members of the energy industry are developing global standards for HANs. Within 5 years, it is estimated that over 126 million smart meters will be installed in households worldwide. Using HANs, consumers will be able to shift their usage away from peak energy usage times that are more expensive. Studies have demonstrated that the use of dynamic pricing options can result in a 50 per cent load reduction during critical peak periods. A universal standard and certification process is currently underway to prevent HAN market fragmentation and to ensure plug-and-play interoperability among HAN devices. It was concluded that the smart energy home will present large market opportunities for software developers, investors, and manufacturers. 1 fig

  19. Energy Conservation Projects to Benefit the Railroad Industry

    Energy Technology Data Exchange (ETDEWEB)

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction

  20. Ranking energy-conservation measures to establish research priorities: synopsis of a workshop

    Energy Technology Data Exchange (ETDEWEB)

    Moskowitz, P.D.; Le, T.Q.; Pierce, B.

    1979-05-02

    A workshop was convened to assist DOE's Technology Assessment Division in evaluating the need to prepare additional environmental- and social-impact assessments of different energy-conservation measures. Attendees participated in a decision-making exercise designed to rank 19 different energy-conservation measures according to their overall potential for achieving important national goals and their ease of implementation. The participants felt that the most-important ranking criteria dealt with questions concerning feasibility (economic, political/institutional, social, and technical) and economic efficiency. Other criteria, such as environmental quality and occupational health and safety received lower weights; possibly because of the widespread belief that most of the conservation measures presented would be environmentally beneficial. In the participants' view, the most-promising and feasible conservation measures include new-building-performance standards, retrofit of existing housing stock, new-appliance-performance standards and increased use of smaller cars. In contrast, conservation options which ranked rather low, such as diesel engines, coal-fired aluminum remelt furnaces, and cupola furnace modifications were expected to have some harmful environmental and health impacts. Most of these impacts are expected to be highly localized and of lesser national concern. Disagreement exists as to the efficacy of funding those projects deemed highly desirable and feasible versus those which are expected to have the greater environmental and social impacts. These differences must be taken into account in the research priorities that are eventually established. While environmental and social impacts of alternative energy-conservation measures may prove to be either harmful or beneficial, neither side should be ignored by the policy maker.

  1. An agenda for assessing and improving conservation impacts of sustainability standards in tropical agriculture.

    Science.gov (United States)

    Milder, Jeffrey C; Arbuthnot, Margaret; Blackman, Allen; Brooks, Sharon E; Giovannucci, Daniele; Gross, Lee; Kennedy, Elizabeth T; Komives, Kristin; Lambin, Eric F; Lee, Audrey; Meyer, Daniel; Newton, Peter; Phalan, Ben; Schroth, Götz; Semroc, Bambi; Van Rikxoort, Henk; Zrust, Michal

    2015-04-01

    Sustainability standards and certification serve to differentiate and provide market recognition to goods produced in accordance with social and environmental good practices, typically including practices to protect biodiversity. Such standards have seen rapid growth, including in tropical agricultural commodities such as cocoa, coffee, palm oil, soybeans, and tea. Given the role of sustainability standards in influencing land use in hotspots of biodiversity, deforestation, and agricultural intensification, much could be gained from efforts to evaluate and increase the conservation payoff of these schemes. To this end, we devised a systematic approach for monitoring and evaluating the conservation impacts of agricultural sustainability standards and for using the resulting evidence to improve the effectiveness of such standards over time. The approach is oriented around a set of hypotheses and corresponding research questions about how sustainability standards are predicted to deliver conservation benefits. These questions are addressed through data from multiple sources, including basic common information from certification audits; field monitoring of environmental outcomes at a sample of certified sites; and rigorous impact assessment research based on experimental or quasi-experimental methods. Integration of these sources can generate time-series data that are comparable across sites and regions and provide detailed portraits of the effects of sustainability standards. To implement this approach, we propose new collaborations between the conservation research community and the sustainability standards community to develop common indicators and monitoring protocols, foster data sharing and synthesis, and link research and practice more effectively. As the role of sustainability standards in tropical land-use governance continues to evolve, robust evidence on the factors contributing to effectiveness can help to ensure that such standards are designed and

  2. Energy management for the future. A sourcebook of ideas and activities for energy conservation learning programs

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This book serves as a teaching aid for Canadian school programs in energy conservation and energy management. Suitable curriculum areas and objectives are outlined, and suggestions are presented for organizing thematic study units. References are made throughout to appropriate use of additional media such as filmstrips. Five study units, each with its own classroom activities, are detailed: energy resources, energy and the home, energy and food, energy and leisure, and energy in transportation. Suggestions are given for ongoing energy management educational programs to be tried out once the study units have been completed. 23 figs.

  3. DOE technical standards list. Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  4. Energy conservation through utilization of mechanical energy storage

    Science.gov (United States)

    Eisenhaure, D. B.; Bliamptis, T. E.; Downer, J. R.; Heinemann, P. C.

    Potential benefits regarding fuel savings, necessary technology, and evaluation criteria for the development of flywheel-hybrid vehicles are examined. A case study is quoted in which adoption of flywheel-hybrid vehicles in a taxi fleet would result in an increase of 10 mpg average to 32 mpg. Two proposed systems are described, one involving direct engine power to the flywheel and the second regenerating the flywheel from braking energy through a continuously variable transmission. Fuel consumption characteristics are considered the ultimate determinant in the choice of configuration, while material properties and housing shape determine the flywheel speed range. Vehicle losses are characterized and it is expected that a flywheel at 12,000 rpm will experience less than one hp average parasitic power loss. Flywheel storage is suitable for smaller engines because larger engines dominate the power train mass. Areas considered important for further investigation include reliability of an engine run near maximum torque, noise and vibration associated with flywheel operation, start up delays, compatibility of driver controls, integration of normal with regenerative braking systems, and, most importantly, the continuously variable transmission.

  5. Local policies for DSM: the UK's home energy conservation act

    International Nuclear Information System (INIS)

    Jones, E.; Leach, M.

    2000-01-01

    Residential energy use accounts for approximately 28 per cent of total primary energy use in the UK, with consumption in this sector forecast to increase due partly to expanding numbers of households. Finding ways to reduce residential energy consumption must form a key part of the climate change strategies of the UK and all developed countries. In 1995, an innovative piece of legislation was passed in the UK, devolving residential energy efficiency responsibility to local government. Under 'The Home Energy Conservation Act' (HECA), local authorities are obliged to consider the energy efficiency of private as well as public housing stock. Authorities were given a duty to produce a strategy for improving residential energy efficiency in their area by 30 per cent in the next 10-15 years. This paper describes the enormous variation in the quality of local authorities' strategies and discusses reasons for this variation. Based on a nationwide survey of HECA lead officers, it considers the opportunities and constraints facing local authorities, and what has been achieved to-date under the Act. It also examines how HECA fits into the UK's national energy policy and explains the roles of other institutions across the public, private and voluntary sector in facilitating implementation of the Act. Finally, the paper considers how other countries can learn from the UK's HECA experience and can use the Act as a template to apply the principle of subsidiarity to this area of environmental policy. (Author)

  6. Renewable energy and conservation measures for non-residential buildings

    Science.gov (United States)

    Grossman, Andrew James

    The energy demand in most countries is growing at an alarming rate and identifying economically feasible building retrofit solutions to decrease the need for fossil fuels so as to mitigate their environmental and societal impacts has become imperative. Two approaches are available for identifying feasible retrofit solutions: 1) the implementation of energy conservation measures; and 2) the production of energy from renewable sources. This thesis focuses on the development of retrofit software planning tools for the implementation of solar photovoltaic systems, and lighting system retrofits for mid-Michigan institutional buildings. The solar planning tool exploits the existing blueprint of a building's rooftop, and via image processing, the layouts of the solar photovoltaic arrays are developed based on the building's geographical location and typical weather patterns. The resulting energy generation of a PV system is estimated and is utilized to determine levelized energy costs. The lighting system retrofit analysis starts by a current utilization assessment of a building to determine the amount of energy used by the lighting system. Several LED lighting options are evaluated on the basis of color correlation temperature, color rendering index, energy consumption, and financial feasibility, to determine a retrofit solution. Solar photovoltaic installations in mid-Michigan are not yet financially feasible, but with the anticipated growth and dynamic complexity of the solar photovoltaic market, this solar planning tool is able to assist building proprietors make executive decisions regarding their energy usage. Additionally, a lighting system retrofit is shown to have significant financial and health benefits.

  7. The origin of the energy-momentum conservation law

    Science.gov (United States)

    Chubykalo, Andrew E.; Espinoza, Augusto; Kosyakov, B. P.

    2017-09-01

    The interplay between the action-reaction principle and the energy-momentum conservation law is revealed by the examples of the Maxwell-Lorentz and Yang-Mills-Wong theories, and general relativity. These two statements are shown to be equivalent in the sense that both hold or fail together. Their mutual agreement is demonstrated most clearly in the self-interaction problem by taking account of the rearrangement of degrees of freedom appearing in the action of the Maxwell-Lorentz and Yang-Mills-Wong theories. The failure of energy-momentum conservation in general relativity is attributed to the fact that this theory allows solutions having nontrivial topologies. The total energy and momentum of a system with nontrivial topological content prove to be ambiguous, coordinatization-dependent quantities. For example, the energy of a Schwarzschild black hole may take any positive value greater than, or equal to, the mass of the body whose collapse is responsible for forming this black hole. We draw the analogy to the paradoxial Banach-Tarski theorem; the measure becomes a poorly defined concept if initial three-dimensional bounded sets are rearranged in topologically nontrivial ways through the action of free non-Abelian isometry groups.

  8. Selected bibliography: cost and energy savings of conservation and renewable energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-05-01

    This bibliography is a compilation of reports on the cost and energy savings of conservation and renewable energy applications throughout the United States. It is part of an overall effort to inform utilities of technological developments in conservation and renewable energy technologies and so aid utilities in their planning process to determine the most effective and economic combination of capital investments to meet customer needs. Department of Energy assessments of the applications, current costs and cost goals for the various technologies included in this bibliography are presented. These assessments are based on analyses performed by or for the respective DOE Program Offices. The results are sensitive to a number of variables and assumptions; however, the estimates presented are considered representative. These assessments are presented, followed by some conclusions regarding the potential role of the conservation and renewable energy alternative. The approach used to classify the bibliographic citations and abstracts is outlined.

  9. Residential energy-efficient technology adoption, energy conservation, knowledge, and attitudes: An analysis of European countries

    International Nuclear Information System (INIS)

    Mills, Bradford; Schleich, Joachim

    2012-01-01

    Relationships between measures of household energy use behavior and household characteristics are estimated using a unique dataset of approximately 5000 households in 10 EU countries and Norway. Family age-composition patterns are found to have a distinct impact on household energy use behavior. Households with young children are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy savings for environmental reasons. By contrast, households with a high share of elderly members place more importance on financial savings, and have lower levels of technology adoption, energy conservation practice use, and knowledge about household energy use. Education levels also matter, with higher levels associated with energy-efficient technology adoption and energy conservation practice use. Similarly, university education increases the stated importance of energy savings for greenhouse gas reductions and decreases the stated importance for financial reasons. Education impacts also vary greatly across survey countries and there is some evidence of an Eastern–Western European divide with respect to attitudes towards energy savings. These cross-country differences highlight the need to balance a common EU energy-efficiency policy framework with flexibility for country specific policies to address unique constraints to energy-efficient technology and conservation practice adoption. - Highlights: ► Household energy use behavior is explored with data from 11 European countries. ► Household age structure and education influence household energy use behavior and attitudes. ► Significant country differences in household energy use behavior exist. ► The EU needs to balance a common energy-efficiency policy framework with country specific policies.

  10. Energy, momentum and angular momentum conservations in de Sitter gravity

    International Nuclear Information System (INIS)

    Lu, Jia-An

    2016-01-01

    In de Sitter (dS) gravity, where gravity is a gauge field introduced to realize the local dS invariance of the matter field, two kinds of conservation laws are derived. The first kind is a differential equation for a dS-covariant current, which unites the canonical energy-momentum (EM) and angular momentum (AM) tensors. The second kind presents a dS-invariant current which is conserved in the sense that its torsion-free divergence vanishes. The dS-invariant current unites the total (matter plus gravity) EM and AM currents. It is well known that the AM current contains an inherent part, called the spin current. Here it is shown that the EM tensor also contains an inherent part, which might be observed by its contribution to the deviation of the dust particle’s world line from a geodesic. All the results are compared to the ordinary Lorentz gravity. (paper)

  11. 77 FR 31756 - Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating...

    Science.gov (United States)

    2012-05-30

    ...-AC46 Energy Conservation Program: Alternative Efficiency Determination Methods and Alternative Rating... regulations authorizing the use of alternative methods of determining energy efficiency or energy consumption... alternative methods of determining energy efficiency or energy consumption of various consumer products and...

  12. Analysis on effects of energy efficiency regulations & standards for industrial boilers in China

    Science.gov (United States)

    Liu, Ren; Chen, Lili; Zhao, Yuejin; Liu, Meng

    2017-11-01

    The industrial boilers in China are featured by large quantity, wide distribution, high energy consumption and heavy environmental pollution, which are key problems faced by energy conservation and environmental protection in China. Meanwhile, industrial boilers are important equipment for national economy and people’s daily life, and energy conservation gets through all segments from type selection, purchase, installation and acceptance to fuel management, operation, maintenance and service. China began to implement such national mandatory standards and regulations for industrial boiler as GB24500-2009 The Minimum Allowable Values of Energy Efficiency and Energy Efficiency Grades of Industrial Boilers and TSG G002-2010 Supervision Regulation on Energy-Saving Technology for Boilers since 2009, which obviously promote the development of energy conservation of industrial boilers, but there are also some problems with the rapid development of technologies for energy conservation of industrial boilers. In this paper, the implementation of energy efficiency standards for industrial boilers in China and the significance are analyzed based on survey data, and some suggestions are proposed for the energy efficiency standards for industrial boilers. Support by Project 2015424050 of Special Fund for quality control Research in the Public Interest

  13. Alexandria electricity distribution company (AEDC) experience in energy conservation

    International Nuclear Information System (INIS)

    Youssef, K.; Soliman, O.; Nabil, A.

    2005-01-01

    Alexandria is the second capital of Egypt and represents forty percent of Egypt's industrial activities. There are about 350 big industrial firms and more than 2 thousands small and medium enterprises. This industries produces significant greenhouse gas emission. Good efforts are exerted in the field of energy saving and environment conservation by AEDC in order to reduce and limit greenhouse gas emission. AEDC participated in many projects sponsored by different foreign counterparts. These projects are: 1 - Energy and urban environment in Mediterranean countries: Phases 1, 2(1995-1996). 2 - Demand side management (DSM) 1996 - 1997. 3 - Energy and urban environment in Mediterranean countries: Phases 3 (2002-2003). 4 - Global environment facility ( GEF ) 1999 - 2003. The results of these pilot projects are presented in details in this paper

  14. Sexual predators, energy development, and conservation in greater Yellowstone.

    Science.gov (United States)

    Berger, Joel; Beckmann, Jon P

    2010-06-01

    In the United States, as elsewhere, a growing debate pits national energy policy and homeland security against biological conservation. In rural communities the extraction of fossil fuels is often encouraged because of the employment opportunities it offers, although the concomitant itinerant workforce is often associated with increased wildlife poaching. We explored possible positive and negative factors associated with energy extraction in the Greater Yellowstone Ecosystem (GYE), an area known for its national parks, intact biological diversity, and some of the New World's longest terrestrial migrations. Specifically, we asked whether counties with different economies-recreation (ski), agrarian (ranching or farming), and energy extractive (petroleum)-differed in healthcare (gauged by the abundance of hospital beds) and in the frequency of sexual predators. The absolute and relative frequency of registered sex offenders grew approximately two to three times faster in areas reliant on energy extraction. Healthcare among counties did not differ. The strong conflation of community dishevel, as reflected by in-migrant sexual predators, and ecological decay in Greater Yellowstone is consistent with patterns seen in similar systems from Ecuador to northern Canada, where social and environmental disarray exist around energy boomtowns. In our case, that groups (albeit with different aims) mobilized campaigns to help maintain the quality of rural livelihoods by protecting open space is a positive sign that conservation can matter, especially in the face of rampant and poorly executed energy extraction projects. Our findings further suggest that the public and industry need stronger regulatory action to instill greater vigilance when and where social factors and land conversion impact biological systems.

  15. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  16. Performance of passive solar and energy conserving houses in California

    Science.gov (United States)

    Mahajan, S.; Newcomb, C.; Shea, M.; Mort, D.

    1983-11-01

    This report provides a technical description of the methodology and the results of a two year effort to collect field data on the performance of passive solar and energy conserving houses in California. Sixty-three passive solar houses were visited and several hours were spent with the homeowner obtaining building details, management procedures, architectural plans, photographs, and at least a year of billing data. With this information thermal performance parameters were calculated for each of the houses. Eleven of the above sixty-three Class C sites (nine passive solar and two energy conserving houses) were instrumented and monitored using the SERI Class B methodology as a guideline. Continuous data were collected for one year using up to 18 different sensors to measure temperatures, electric power, insolation, and the status of fans, gas burners, and moveable insulation. In addition careful one time measurements were made to determine the loss coefficient, infiltration rate, and furnace efficiency. Analysis of this data giving comfort conditions maintained and energy uses for a complete heating and cooling season for each of the houses is presented.

  17. Solar energy and conservation technologies for Caribbean Tourist Facilities (CTF)

    Science.gov (United States)

    The primary objectives of the Caribbean Tourist Facilities (CTF) project were to develop and publish materials and conduct workshops on solar energy and conservation technologies that would directly address the needs and interests of tourist facilities in the Caribbean basin. Past contacts with the Caribbean and US tourist industries indicated that decision-makers remained unconvinced that renewable technologies could have a significant impact on development and operation costs or that renewable energy products and services suited their needs. In order to assure that the materials and programs developed were responsive to the Caribbean tourist industry and U.S. conservation and renewable energy industries, marketing research with potential end users and the organizations and associations that serve those users was included as an underlying task in the project. The tasks outlined in the CTF Statement of Work included conference planning, gathering of field data, development of educational materials, and conduct of workshop(s). In addition to providing a chronicle of the fulfillment of those tasks, this final report includes suggestions for distributing the documents developed during the project, venues for future workshops, and other technology transfer and market influence strategies.

  18. Retrofit energy conservation in residential buildings in southern California

    Science.gov (United States)

    Turner, R. H.; Birur, G. C.; Daksla, C.

    1982-01-01

    The common energy conservation techniques (ECTs) that can be retrofit-installed into residential buildings are surveyed. The quantity of saved energy for heating and cooling attributable to each ECT is evaluated for three common modes of heating: natural gas heating at 60/therm; heating via heat pump at $1.20/therm; and electric resistance heating at $2.40/therm. In every case, a life cycle cost comparison is made between the long term revenue due to energy conservation and a safe and conventional alternative investment that might be available to the prudent homeowner. The comparison between investment in an ECT and the alternative investment is brought into perspective using the life cycle payback period and an economic Figure of Merit (FOM). The FOM allows for relative ranking between candidate ECTs. Because the entire spectrum of winter heating climates in California is surveyed, the decision maker can determine whether or not a considered ECT is recommended in a given climate, and under what conditions an ECT investment becomes attractive.

  19. Energy conservation and management system using efficient building automation

    Science.gov (United States)

    Ahmed, S. Faiz; Hazry, D.; Tanveer, M. Hassan; Joyo, M. Kamran; Warsi, Faizan A.; Kamarudin, H.; Wan, Khairunizam; Razlan, Zuradzman M.; Shahriman A., B.; Hussain, A. T.

    2015-05-01

    In countries where the demand and supply gap of electricity is huge and the people are forced to endure increasing hours of load shedding, unnecessary consumption of electricity makes matters even worse. So the importance and need for electricity conservation increases exponentially. This paper outlines a step towards the conservation of energy in general and electricity in particular by employing efficient Building Automation technique. It should be noted that by careful designing and implementation of the Building Automation System, up to 30% to 40% of energy consumption can be reduced, which makes a huge difference for energy saving. In this study above mentioned concept is verified by performing experiment on a prototype experimental room and by implementing efficient building automation technique. For the sake of this efficient automation, Programmable Logic Controller (PLC) is employed as a main controller, monitoring various system parameters and controlling appliances as per required. The hardware test run and experimental findings further clarifies and proved the concept. The added advantage of this project is that it can be implemented to both small and medium level domestic homes thus greatly reducing the overall unnecessary load on the Utility provider.

  20. 78 FR 50026 - Energy Efficiency and Conservation Loan Program Finding of No Significant Impact

    Science.gov (United States)

    2013-08-16

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Energy Efficiency and Conservation Loan Program... implementing its new Energy Efficiency and Conservation Loan Program. The FONSI decision document is based on... entitled ``Energy Efficiency and Conservation Loan Program,'' which expands upon policies and procedures...

  1. 40 CFR 73.80 - Operation of allowance reserve program for conservation and renewable energy.

    Science.gov (United States)

    2010-07-01

    ... for conservation and renewable energy. 73.80 Section 73.80 Protection of Environment ENVIRONMENTAL... and Renewable Energy Reserve § 73.80 Operation of allowance reserve program for conservation and renewable energy. (a) General. The Administrator will allocate allowances from the Conservation and...

  2. Energy conserving, linear scaling Born-Oppenheimer molecular dynamics.

    Science.gov (United States)

    Cawkwell, M J; Niklasson, Anders M N

    2012-10-07

    Born-Oppenheimer molecular dynamics simulations with long-term conservation of the total energy and a computational cost that scales linearly with system size have been obtained simultaneously. Linear scaling with a low pre-factor is achieved using density matrix purification with sparse matrix algebra and a numerical threshold on matrix elements. The extended Lagrangian Born-Oppenheimer molecular dynamics formalism [A. M. N. Niklasson, Phys. Rev. Lett. 100, 123004 (2008)] yields microcanonical trajectories with the approximate forces obtained from the linear scaling method that exhibit no systematic drift over hundreds of picoseconds and which are indistinguishable from trajectories computed using exact forces.

  3. Correlation-induced spectral changes and energy conservation

    International Nuclear Information System (INIS)

    Agarwal, G.S.; Wolf, E.

    1996-01-01

    An energy conservation law is derived for fields generated by random, statistically stationary, scalar sources of any state of coherence. It is shown that correlation-induced spectral changes are in strict agreement with this law and that, basic to the understanding of such changes, is a distinction that must be made between the spectrum of a source and the spectrum of the field that the source generates. This distinction, which is obviously relevant for spectroscopy, does not appear to have been previously recognized. copyright 1996 The American Physical Society

  4. Environmental Development Plan for Transportation Energy Conservation. FY 79 update

    Energy Technology Data Exchange (ETDEWEB)

    Singh, M. K.; Bernard, III, M. J.

    1978-12-15

    This is the first annual update of the Environment Development Plan (EDP) for the DOE Division of Transportation Energy Conservation program. It identifies the ecosystem, resource, physical environment, health, safety, and socioeconomic concerns associated with the division's transportation programs. These programs include the research, development, demonstration and assessment (RDD and A) of seventeen transportation technologies and several strategy and policy development and implementation projects. The transportation technologies projects deal with highway transport including electric vehicles, marine transport and pipeline transport. This EDP presents a research and assessment plan for resolving any potentially adverse environmental concerns stemming from these programs.

  5. Department of Energy programs and objectives: energy conservation in agricultural production

    Energy Technology Data Exchange (ETDEWEB)

    1977-12-01

    This document describes the current Department of Energy agriculture research program as it relates to the research recommendations submitted by a 1976 workshop on energy conservation in agricultural production. In-depth discussions on fertilizers, irrigation, crop drying, fuel substitution, crop and animal production systems, greenhouses, materials handling, and transport systems are included. (MCW)

  6. 76 FR 22453 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-04-21

    ... Mode and Off Mode b. Automatic Cycle Termination c. Ventless Clothes Dryers d. Consumer Usage Habits e... as cooling capacity in British thermal units (Btu) per hour (h) divided by electrical input power in...

  7. 77 FR 31917 - Energy Conservation Program: Energy Conservation Standards for Residential Dishwashers

    Science.gov (United States)

    2012-05-30

    .... Summary of the Direct Final Rule and Its Benefits A. Benefits and Costs to Consumers B. Impact on... Savings 5. Net Present Value of Consumer Benefit H. Consumer Subgroup Analysis I. Manufacturer Impact... another way of representing consumer NPV, plus (2) the annualized monetary value of the benefits of...

  8. 78 FR 36315 - Energy Conservation Program: Energy Conservation Standards for Standby Mode and Off Mode for...

    Science.gov (United States)

    2013-06-17

    ... of the Final Rule and Its Benefits A. Benefits and Costs to Consumers B. Impact on Manufacturers C... Value of Consumer Costs and Benefits c. Indirect Impacts on Employment 4. Impact on Utility or... Power = 2.2 watts. Microwave Ovens. A. Benefits and Costs to Consumers Table I-2 presents DOE's...

  9. 76 FR 37549 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-06-27

    ............ 3.20 to 4.22......... 3.89 5.91 19.18. NPV of Consumer Benefits (2009$ billion) 3% discount rate 0... amount DOE considers significant. Under TSL 7, the NPV of consumer benefit would be -$44.98 billion..., and 23 years in the hot-dry region. At TSL 7, the fraction of consumers experiencing an LCC benefit is...

  10. 78 FR 64067 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-10-25

    .... Inverter Controls for PSC Motors c. High-Efficiency Motors d. Multi-Stage or Modulating Heating Controls e... MPC b. Inverter-Driven PSC Costs c. Furnace Fan Motor MPC d. Motor Control Costs e. Backward-Inclined... savings is measured for the lifetime of residential furnace fans shipped in 2019-2048. The SCC values, on...

  11. 78 FR 62494 - Energy Conservation Program: Energy Conservation Standards for Ceiling Fans

    Science.gov (United States)

    2013-10-22

    ... consumers' decisions about purchasing air conditioning equipment. For example: How much more or less likely are consumers to own or purchase an air conditioner if they already have a ceiling fan? How much more... and to facilitate this process, DOE has identified several related issues in this RFI on which DOE...

  12. 76 FR 52854 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Dryers and...

    Science.gov (United States)

    2011-08-24

    ... justify withdrawal, is an appropriate exercise of the Secretary's discretion and use of limited resources... dependence of the analysis results on different analytical assumptions. DOE found that for the selected...

  13. 76 FR 57897 - Energy Conservation Program: Energy Conservation Standards for Certain External Power Supplies

    Science.gov (United States)

    2011-09-19

    ... Order requires agencies to examine the constitutional and statutory authority supporting any action that... required by Executive Order 13132. F. Review Under Executive Order 12988, ``Civil Justice Reform'' With... Executive Order 12988, ``Civil Justice Reform,'' 61 FR 4729 (February 7, 1996), imposes on Federal agencies...

  14. 76 FR 69122 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products...

    Science.gov (United States)

    2011-11-08

    ..., Microwave Ovens, and Electric and Gas Kitchen Ranges and Ovens) and for Certain Commercial and Industrial... reasons. List of Subjects in 10 CFR Part 431 Administrative practice and procedure, Confidential business...

  15. 75 FR 1121 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products...

    Science.gov (United States)

    2010-01-08

    ..., multi-family housing, and on-premises laundry applications led DOE to conduct a sensitivity analysis for... commercial laundry practices likely differ from residential practices,\\5\\ DOE concluded in the October 2008..., and service; (b) adverse impacts on product utility or availability; or (c) adverse impacts on health...

  16. 78 FR 12969 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

    Science.gov (United States)

    2013-02-26

    ... requested comment on (1) the penetration of ETS programs and the impacts of such programs on consumers and... grid interactive water heaters and that doing so would impede the development of the market for HPWHs..., Dairyland cited a 2005 study \\11\\ of more than 200 demand response programs which found that dynamic pricing...

  17. 76 FR 52892 - Energy Conservation Program: Energy Conservation Standards for Fluorescent Lamp Ballasts

    Science.gov (United States)

    2011-08-24

    ... data DOE used in support of the NOPR and DOE's approach to accounting for measurement variation and... considering accounting for measurement (specifically lab-to-lab) variation as a separate adjustment to... Power Approximations IV. Accounting for Variation and Compliance Certification Procedures A. Compliance...

  18. 77 FR 59719 - Energy Conservation Program: Energy Conservation Standards for Residential Clothes Washers

    Science.gov (United States)

    2012-10-01

    ... to include emissions that occur in manufacturing or transport of appliances. EPCA directs DOE to... with less automation and more labor than some of the larger competitors. To change the design of their...

  19. 76 FR 67037 - Energy Conservation Program: Energy Conservation Standards for Residential Furnaces and...

    Science.gov (United States)

    2011-10-31

    ..., including trends derived using the experience curve approach. AGA and APGA stated that DOE's experience... and APGA using DOE's model, DOE has concluded that its model (which remains unchallenged in terms of... forecast has been trending downward over the last several years; (5) DOE's use of the AEO 2010 Reference...

  20. 78 FR 62988 - Energy Conservation Program: Energy Conservation Standards for Certain Consumer Products and...

    Science.gov (United States)

    2013-10-23

    ....gov/cases/ee/tee0010.pdf ) (last accessed September 2010); 76 FR 37408, 37514, 37541-42 (June 27, 2011... rulemaking process. 68 FR 7990. DOE has made its procedures and policies available on the Office of the... requires agencies to examine the constitutional and statutory authority supporting any action that would...

  1. 78 FR 23335 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

    Science.gov (United States)

    2013-04-18

    ... nominal EL values. Table I.5--Electrical Efficiencies for All Liquid-Immersed Distribution Transformer... 2,500 99.53 Table I.6--Electrical Efficiencies for All Low-Voltage Dry-Type Distribution Transformer... Transformers'' published by the National Electrical Manufacturers Association (NEMA TP 1-2002). [[Page 23343...

  2. 77 FR 16769 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-03-22

    ... provisions from AHRI operations manuals (OMs) in its test procedures that would clarify the application of... Compressor Break-In Period.... Small Unitary OM 3.8 (Break-in Certain AHRI OMs DOE is proposing to Operation... equipment class. Period). hours. Tolerances Multiple OMs.... N/A Certain AHRI OMs and Compliance with DOE...

  3. 77 FR 28927 - Energy Conservation Program for Certain Industrial Equipment: Energy Conservation Standards and...

    Science.gov (United States)

    2012-05-16

    ... provisions (with some modification) from AHRI operations manuals (AHRI OMs) that would harmonize equipment... DOE published for notice and comment. By adopting some of the guidance in the AHRI OMs, DOE hopes to... and DOE-initiated testing. In certain cases, the AHRI OMs require manufacturers to provide information...

  4. 75 FR 80292 - Energy Conservation Program: Energy Conservation Standards for Electric Motors

    Science.gov (United States)

    2010-12-22

    ... horsepower, manufactured (alone or as a component of another piece of equipment) after December 19, 2010, to... Design B, six-pole open motors rated 250, 300, and 350 horsepower are not consistent with the EISA 2007... component of another piece of equipment), on or after December 19, 2010, shall have a nominal full load...

  5. 76 FR 71835 - Energy Conservation Program: Energy Conservation Standards for Direct Heating Equipment

    Science.gov (United States)

    2011-11-18

    ..., Public Meeting Transcript, No. 14 at pp. 94-95) The Air- conditioning, Heating, and Refrigeration... realistic simulation of a wood burning fire in a wood burning fireplace, not to provide heat. (R.H. Peterson...

  6. Energy conservation and management strategies in Heavy Water Plants

    International Nuclear Information System (INIS)

    Kamath, H.S.

    2002-01-01

    In the competitive industrial environment it is essential that cost of the product is kept at the minimum possible. Energy conservation is an important aspect in achieving this as energy is one of the key recourses for growth and survival of industry. The process of heavy water production being very complex and energy intensive, Heavy Water board has given a focussed attention for initiating various measures for reducing the specific energy consumption in all the plants. The initiative resulted in substantial reduction in specific energy consumption and brought in savings in cost. The cumulative reduction of specific energy consumption has been over 30% over the last seven years and the total savings for the last three years on account of the same has been about Rs. 190 crore. The paper describes the strategies adopted in the heavy water plants for effecting the above achievements. The paper covers the details of some of the energy saving schemes carried out at different heavy water plants through case studies. The case studies of schemes implemented at HWPs are general in nature and is applicable for any other industry. The case studies cover the modifications with re-optimisation of the process parameters, improvements effected in utility units like refrigeration and cooling water systems, improvements in captive power plant cycle and improved recycle scheme for water leading to reduced consumptions. The paper also mentions the innovative ammonia absorption refrigeration with improved coefficient of performance and HWB's efforts in development of the system as an integrated unit of the ammonia water deuterium exchange process for heavy water production. HWB also has taken up R and D on various other schemes for improvements in energy consumption for future activities covering utilisation of low grade energy for generation of refrigeration. (author)

  7. Quasilocal energy and conserved charges derived from the gravitational action

    International Nuclear Information System (INIS)

    Brown, J.D.; York, J.W. Jr.

    1993-01-01

    The quasilocal energy of gravitational and matter fields in a spatially bounded region is obtained by employing a Hamilton-Jacobi analysis of the action functional. First, a surface stress-energy-momentum tensor is defined by the functional derivative of the action with respect to the three-metric on 3 B, the history of the system's boundary. Energy surface density, momentum surface density, and spatial stress are defined by projecting the surface stress tensor normally and tangentially to a family of spacelike two-surfaces that foliate 3 B. The integral of the energy surface density over such a two-surface B is the quasilocal energy associated with a spacelike three-surface Σ whose orthogonal intersection with 3 B is the boundary B. The resulting expression for quasilocal energy is given in terms of the total mean curvature of the spatial boundary B as a surface embedded in Σ. The quasilocal energy is also the value of the Hamiltonian that generates unit magnitude proper-time translations on 3 B in the timelike direction orthogonal to B. Conserved charges such as angular momentum are defined using the surface stress tensor and Killing vector fields on 3 B. For spacetimes that are asymptotically flat in spacelike directions, the quasilocal energy and angular momentum defined here agree with the results of Arnowitt, Deser, and Misner in the limit that the boundary tends to spatial infinity. For spherically symmetric spacetimes, it is shown that the quasilocal energy has the correct Newtonian limit, and includes a negative contribution due to gravitational binding

  8. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    International Nuclear Information System (INIS)

    Al-Ajlan, S.A.; Al-Ibrahim, A.M.; Abdulkhaleq, M.; Alghamdi, F.

    2006-01-01

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  9. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajlan, S.A. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia)]. E-mail: salajlan@kacst.edu.sa; Al-Ibrahim, A.M. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia); Abdulkhaleq, M. [Ministry of Water and Electricity (Saudi Arabia); Alghamdi, F. [Ministry of Water and Electricity (Saudi Arabia)

    2006-09-15

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  10. Stable schemes for dissipative particle dynamics with conserved energy

    Energy Technology Data Exchange (ETDEWEB)

    Stoltz, Gabriel, E-mail: stoltz@cermics.enpc.fr

    2017-07-01

    This article presents a new numerical scheme for the discretization of dissipative particle dynamics with conserved energy. The key idea is to reduce elementary pairwise stochastic dynamics (either fluctuation/dissipation or thermal conduction) to effective single-variable dynamics, and to approximate the solution of these dynamics with one step of a Metropolis–Hastings algorithm. This ensures by construction that no negative internal energies are encountered during the simulation, and hence allows to increase the admissible timesteps to integrate the dynamics, even for systems with small heat capacities. Stability is only limited by the Hamiltonian part of the dynamics, which suggests resorting to multiple timestep strategies where the stochastic part is integrated less frequently than the Hamiltonian one.

  11. Energy conservation by hyperfiltration: food industry background literature survey

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-15

    The application of hyperfiltration to selected food product streams and food processing wastewaters for energy conservation was examined. This literature survey had led to the following conclusions: no research has been conducted in the food industry using membranes with hot process streams due to the temperature limitation (< 40/sup 0/C) of the typically studied cellulose acetate membranes; based on the bench-scale research reviewed, concentration of fruit and vegetable juices with membranes appears to be technically feasible; pretreatment and product recovery research was conducted with membranes on citrus peel oil, potato processing and brine wastewaters and wheys. The experiments demonstrated that these applications are feasible; many of the problems that have been identified with membranes are associated with either the suspended solids or the high osmotic pressure and viscosity of many foods; research using dynamic membranes has been conducted with various effluents, at temperatures to approx. 100/sup 0/C, at pressures to 1200 psi and with suspended solids to approx. 2%; and, the dynamic membrane is being prototype tested by NASA for high temperature processing of shower water. The literature review substantiates potential for dynamic membrane on porous stainless tubes to process a number of hot process and effluent streams in the food processing industry. Hot water for recycle and product concentrations are major areas with potential for economic application. The two plants involved in the first phase of the project should be reviewed to identify potential energy conservation applications. As many as possible of the conservation applications should be tested during the screening phase at each site. The most promising applications at each site should be evaluated more intensively to establish engineering estimates of the economics of this technology for the canned fruit and vegetable segment of the food industry.

  12. Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

    Science.gov (United States)

    Zheng, Chaocheng

    2017-10-01

    With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

  13. Conserving energy through new irrigation technologies. Technical briefing report

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    The benefits and applications of five irrigation technologies are explored: mobile drop-tube irrigation, computerized scheduling, reduced-pressure center pivots, well design and development, and automated gated-pipe systems. Perhaps the most promising of the new irrigation technologies is the low-energy, precision-application (LEPA) system. This mobile system used one-half the energy of conventional sprinkler systems and distributes water with greater efficiency through a series of low-pressure drop tubes suspended above the crop. Computerized methods of irrigation scheduling have been developed to help farmers conserve water and energy. Special computer programs determine when a crop needs water and how much to apply for optimal plant growth, thus preventing the unnecessary costs of pumping more water than the crop needs. Field test results show that replacing traditional scheduling methods of irrigation with computerized scheduling can reduce energy and water use by as much as 35%. The irrigation industry is actively promoting reduced-pressure water application methods, particularly for center-pivot systems. Reduced-pressure systems expend less energy but produce the same crop yields as conventional high-pressure systems, as long as excessive water runoff does not occur. If well design and development techniques are applied when a well is drilled into an unconsolidated acquifer, the well's life expectancy, as well as its operating efficiency, can increase, the later by as much as 40%.

  14. Feasibility study of energy conservation at Vietnam Steel Corporation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    Feasibility study was conducted of the project for energy conservation and reduction in greenhouse effect gas emission by introducing the honeycomb type heat storage burner technology to heating furnaces of Vietnam Steel Corporation (VSC). Furnaces for study are the bar mill furnace at Gia Sang plant of TISCO Steelorks, bar mill furnace at Thu Duc plant of SSC Steelworks, billet furnace at new bar mill of SSC Steelworks, slab furnace at new hot strip mill that VSC is now in the planning stage. As a result of the study, the energy conservation amount is 2,900 toe/y at TISCO Steelworks, 2,130 toe/y at SSC Steelworks, and 6,000 toe/y at VSC new hot strip mill, which totaled 11,030 toe/y. The amount of greenhouse effect gas reduction is 9,000 t-CO2/y at TISCO, 6,600 t-CO2/y at SSC, and 18,600 t-CO2/y at VSC, which totaled 34,200 t/y. The total investment amount is 0.23, 0.44, 1.32 and 1.99 billion yen for each. As to the profitability, the internal earning rate is 24%, 86%, 97% and 51% for each, which are all favorable. (NEDO)

  15. Real world financing opportunities for energy conservation projects

    Energy Technology Data Exchange (ETDEWEB)

    Tramonte, D.J.

    1988-01-01

    Do you have the resources, dollars, people expertise and general know-how to do all the energy conservation measures. If you have the funds, do it yourself. Historically you would save more if you hired a private concern because that is the only job the contractor does for you. You have other hats to wear and fires to put out. Using third-party financing can be a good decision based on your specific needs. Procrastination is not the answer - the cost of delay is extensive. Financing energy conservation measures is no different from financing your automobile or home. If the benefits outweigh the negatives, the answer is obvious. Remember, in any case of using private sector financing, your are joining a partnership arrangement. The only way to succeed is to be honest with each other on the front end. There need not be any surprises. Any reputable company will gladly have your attorney evaluate all agreements, amortization schedules, and attachments. Real world financing alternatives will continue to change as the market matures. It's not too good to be true. It is no more than a vehicle to make the efforts of capital improvements streamlined. The money or financing is the catalyst to the project and makes the other areas meld.

  16. Downstream-based Scheduling for Energy Conservation in Green EPONs

    KAUST Repository

    Chen, Shen

    2012-05-01

    Maximizing the optical network unit’s (ONU) sleep time is an effective approach for achieving maximum energy conservation in green Ethernet passive optical networks (EPONs). While overlapping downstream and upstream ONU transmissions can maximize the ONU sleep time, it jeopardizes the quality of service (QoS) performance of the network, especially for downstream traffic in case the overlapping is based on the upstream time slot. In this paper, we study the downstream traffic performance in green EPONs under the limited service discipline and the upstream-based overlapped time window. Specifically, we first derive the expected mean packet delay, and then present a closed-form expression of the ONU sleep time, setting identical upstream/downstream transmission cycle times based on a maximum downstream traffic delay re-quirement. With the proposed system model, we present a novel downstream bandwidth allocation scheme for energy conservation in green EPONs. Simulation results verify the proposed model and highlight the advantages of our scheme over conventional approaches.

  17. Energy-Integrating Master Plan for the City of Atlantic City, New Jersey: energy conservation element. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-01

    The Master Plan describes a coordinated energy-conservation effort for the City, the effective application and ultimate success of which depend primarily on the active involvement of the City government and its functional departments. Following an introductory section, Section XXI, Community Energy Determinants, describes the natural and man-made environment, growth and energy profiles, and the institutional environment. Additional sections are entitled: Energy-Conservation Options (passive energy options and active energy-conservation options); Energy Integration; Community Energy Management; Energy-Conservation Implementation Plan; and an appendix containing an energy-related glossary, a directory to various sources of information on energy conservation, various technical documents, a copy of the National Energy Act, and a bibliography. (MCW)

  18. Analysis of energy demand, and evaluation of energy conservation measures in urban districts

    International Nuclear Information System (INIS)

    Nakamura, H.; Yoshida, N.

    1994-01-01

    Mitsubishi Research Institute has analyzed the energy demand of a typical Japanese city, Yokohama, as well as the distribution of fossil-energy flow, and the final consumption by sectors. It has evaluated the effectiveness of various energy conservation measures, (e.g., cogeneration, electric cars, insulation,...) in countering the global warming trend. This study defines a viable methodology which may be utilized, in the future, in examining the effectiveness of environmental policies. (TEC). 1 tab., 4 figs

  19. Policy instruments for energy conservation: A multidimensional assessment

    International Nuclear Information System (INIS)

    Giraudet, Louis-Gaetan

    2011-01-01

    This thesis evaluates the effectiveness of various forms of taxes, subsidies and regulations implemented to correct for market failures that may prevent energy savings. It builds on various approaches, with gradual complexity. First, a standard micro-economic model is developed to compare the static performances of these instruments. Second, the representation of consumer behaviour is strengthened in a model of the residential energy demand for space heating in France, which allows to identify the dynamic mechanisms by which instruments can correct for the main market failures. Third, an empirical evaluation of 'white certificate' schemes - tradable energy saving obligations imposed on energy operators - is made from the comparison between the British, Italian and French experiences, taking into account national institutions. The following conclusions can be drawn from these various approaches: (i) energy taxes, by encouraging both energy efficiency investment and sufficiency behaviour, are particularly effective; (ii) energy efficiency regulations have a significant impact on the diffusion of efficient technologies; (iii) subsidies to energy efficiency induce a large rebound effect; (iv) depending on the institutional environment in which they operate, white certificate schemes combine different properties of these instruments. Applied to the French residential building sector, the most effective combination of these instruments does not allow to reach the energy saving target set by the Government. (author)

  20. Energy conservation in the earth's crust and climate change.

    Science.gov (United States)

    Mu, Yao; Mu, Xinzhi

    2013-02-01

    Among various matters which make up the earth's crust, the thermal conductivity of coal, oil, and oil-gas, which are formed over a long period of geological time, is extremely low. This is significant to prevent transferring the internal heat of the earth to the thermal insulation of the surface, cooling the surface of the earth, stimulating biological evolution, and maintaining natural ecological balance as well. Fossil energy is thermal insulating layer in the earth's crust. Just like the function of the thermal isolation of subcutaneous fatty tissue under the dermis of human skin, it keeps the internal heat within the organism so it won't be transferred to the skin's surface and be lost maintaining body temperature at low temperatures. Coal, oil, oil-gas, and fat belong to the same hydrocarbons, and the functions of their thermal insulation are exactly the same. That is to say, coal, oil, and oil-gas are just like the earth's "subcutaneous fatty tissue" and objectively formed the insulation protection on earth's surface. This paper argues that the human large-scale extraction of fossil energy leads to damage of the earth's crust heat-resistant sealing, increasing terrestrial heat flow, or the heat flow as it is called, transferring the internal heat of the earth to Earth's surface excessively, and causing geotemperature and sea temperature to rise, thus giving rise to global warming. The reason for climate warming is not due to the expansion of greenhouse gases but to the wide exploitation of fossil energy, which destroyed the heat insulation of the earth's crust, making more heat from the interior of the earth be released to the atmosphere. Based on the energy conservation principle, the measurement of the increase of the average global temperature that was caused by the increase of terrestrial heat flow since the Industrial Revolution is consistent with practical data. This paper illustrates "pathogenesis" of climate change using medical knowledge. The

  1. Federal energy conservation programs pursuant to section 381 of the Energy Policy and Conservation Act (Public Law 94-163). Annual report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    1979-02-21

    This report provides an overview of the activities and achievements of the executive branch of the Federal Government in implementing the energy conservation requirements and provisions of section 381 of the Energy Policy and Conservation Act (EPCA) of 1975 (Public Law 94-163). The report describes Federal actions to develop procurement policies that promote energy conservation and efficiency, develop a Federal 10-Year Buildings Energy Conservation Plan, develop responsible public education and information programs, encourage energy conservation and energy efficiency, and promote vanpooling and carpooling arrangements. About half of the Nation's energy is used in our homes and automobiles. Another 48 percent is used by State and local governments, business and insutry, in providing needed goods and services. The Federal Government is the Nation's largest energy user, accouting for 2.2 percent of the total national energy used in 1977. This energy is used by nearly 6 million people in more than 400 thousand buildings and in the operation of more than 600 thousand vehicles. While energy conservation and energy efficiency measures alone cannot solve our immediate problems, they are an essential part of our transition to an era of scarce and expensive energy supplies.

  2. Simplified energy design economics: Principles of economics applied to energy conservation and solar energy investments in buildings

    Science.gov (United States)

    Marshall, H. E.; Ruegg, R. T.; Wilson, F.

    1980-01-01

    Economic analysis techniques for evaluating alternative energy conservation investments in buildings are presented. Life cycle cost, benefit cost, savings to investment, payback, and rate of return analyses are explained and illustrated. The procedure for discounting is described for a heat pump investment. Formulas, tables of discount factors, and detailed instructions are provided to give all information required to make economic evaluations of energy conserving building designs.

  3. Energy consumption and conservation patterns in Canadian households. Summary report. Habitudes de consommation et de conservation de l'energie dans les foyers Canadiens. Resume

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G.H.G.; Ritchie, J.R.B.; Claxton, J.D.

    1978-01-01

    To examine the consumer behavior sector of energy demand patterns in Canada, this report undertook to identify major groupings of households based on energy consumption profiles and energy values, to relate these groupings to situational and demographic factors, and to initiate a comparative analysis of the receptivity of the major groupings to alternative energy conservation policy proposals. Data were collected from household surveys and energy suppliers. Householders were asked about their attitudes to energy conservation and energy policy, and profiles of energy consumption patterns of typical households were identified. To aid in evaluating the research, households were classified according to their levels of in-home energy consumption and automobile gasoline consumption. The findings indicated a range of lifestyles highly interrelated in terms of levels of energy consumption, ownership of energy-consuming products, knowledge and concern for energy issues, willingness to cut back energy consumption, and preferences for alternative conservation policies. The study has shown that most consumers are not very aware of the energy problem, do not see conservation as a serious need, and are unlikely to accept major policy interventions that result in major changes in energy supplies and current lifestyles. A number of recommendations are made as to policies, and their possible impact, to conserve household energy. 8 refs. 11 tabs.

  4. Energy consumption and conservation patterns in Canadian households. Summary report. Habitudes de consommation et de conservation de l'energie dans les foyers Canadiens. Resume

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, G H.G.; Ritchie, J R.B.; Claxton, J D

    1978-01-01

    To examine the consumer behavior sector of energy demand patterns in Canada, this report undertook to identify major groupings of households based on energy consumption profiles and energy values, to relate these groupings to situational and demographic factors, and to initiate a comparative analysis of the receptivity of the major groupings to alternative energy conservation policy proposals. Data were collected from household surveys and energy suppliers. Householders were asked about their attitudes to energy conservation and energy policy, and profiles of energy consumption patterns of typical households were identified. To aid in evaluating the research, households were classified according to their levels of in-home energy consumption and automobile gasoline consumption. The findings indicated a range of lifestyles highly interrelated in terms of levels of energy consumption, ownership of energy-consuming products, knowledge and concern for energy issues, willingness to cut back energy consumption, and preferences for alternative conservation policies. The study has shown that most consumers are not very aware of the energy problem, do not see conservation as a serious need, and are unlikely to accept major policy interventions that result in major changes in energy supplies and current lifestyles. A number of recommendations are made as to policies, and their possible impact, to conserve household energy. 8 refs. 11 tabs.

  5. Development of a soil conservation standard and guidelines for OHV recreation management in California

    Science.gov (United States)

    Bedrossian, T.L.; Reynolds, S.D.

    2007-01-01

    In 2004, the California State Parks (CSP) agency contracted with the California Geological Survey (CGS) to update the 1991 Soil Conservation Guide-lines/Standards for Off-Highway Vehicle (OHV) Recreation Management. Per state legislation, the 1991 standards were updated to establish a generic and measurable standard at least sufficient to allow restoration of OHV areas and trails. Given the rapid increase in OHV use in California, the updated Soil Conservation Standard and Guidelines for OHV Recreation Management also allowed for sustainability of trail systems and recreation opportunities. A key part of the update was interaction with stakeholders, agencies, and other interest groups through public workshops and a Consulting Agency Review Committee composed of representatives from the U.S. Natural Resources Conservation Service, U.S. Forest Service, U.S. Bureau of Land Management, U.S. Geological Survey, California Department of Conservation, and CSP. CGS also assessed proposed revisions in three representative OHV areas to ensure that the updated Standard and Guidelines provided sufficient flexibility to allow their application to all sites state-wide, ecosystems with multiple geology and soils types, and a variety of vehicle uses. While geology was not the only basis for the guideline revisions, it was a major factor. CGS staff also had the breadth of knowledge and experience in engineering geology, hydrogeology, road and trail construction, erosion control, and OHV riding necessary to coordinate and develop the multidisciplinary and multi-stakeholder effort.

  6. Consumer behavior and energy conservation. A policy-oriented field experimental study on the effectiveness of behavioral interventions promoting residential energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    Ester, P

    1984-01-01

    The primary goal of this study is to investigate the effectiveness of behavioral interventions aimed at promoting energy conservation by consumers. It is argued that energy conservation has many advantages over other energy policy options, especially with respect to sociopolitical, economic, technical, safety and environmental considerations. Theories are discussed which deal with micromotives behind individual energy consumption and their macroconsequences. Antecedent and consequence behavioral interventions (information/education, prompting, modeling, feedback, self-monitoring, reinforcement/punishment) for promoting energy conservation by consumers are analyzed, and an extensive review is presented of behavioral experiments conducted in this area. Discussed is how the field experiment, which was conducted in five cities in the Netherlands with appr. 400 subjects, has been implemented. Hypotheses are tested regarding belief structures with respect to energy conservation. Provided are data about the absolute and relative effectiveness of energy conservation information, biweekly and monthly feedback, and self-monitoring in encouraging consumers to conserve energy. Hypotheses are tested about cognitive aspects related to responsiveness to behavioral interventions and attitude change toward energy conservation. Conclusions are presented and some energy policy recommendations and directions for future research are formulated. (J.C.R.)

  7. The valuation of environmental externalities in energy conservation planning

    International Nuclear Information System (INIS)

    Chernick, P.L.; Caverhill, E.J.

    1990-01-01

    The determination of the full societal costs of energy usage must incorporate estimates of the environmental effects, or externalities, of energy production and delivery. An externality is any cost or benefit that is not reflected in the price paid by a utility or its customers for energy produced or consumed. The potential variety and scope of externality analyses are discussed. Four methods of externality valuation are briefly discussed to highlight the uses, strengths and pitfalls of each method. The use of pollutants' relative potency, polling of experts, direct estimation of costs, and implied valuation, are compared. The authors preferred method of valuation for near-term energy supply decisions, implied valuation, is discussed in detail. The distinguishing feature of the implied valuation technique is its use of the cost of control, rather than the direct cost of emissions. Only the most expensive required control measure is relevant to valuation of the external effects. The difficulties in applying implied valuation, such as the definition of the margin, the multiple effects of pollutants and the imperfect nature of the regulatory system, are also considered. The effect of environmental externalities on the benefits of conservation are summarized

  8. Dynamic energy conservation model REDUCE. Extension with experience curves, energy efficiency indicators and user's guide

    International Nuclear Information System (INIS)

    Uyterlinde, M.A.; Rijkers, F.A.M.

    1999-12-01

    The main objective of the energy conservation model REDUCE (Reduction of Energy Demand by Utilization of Conservation of Energy) is the evaluation of the effectiveness of economical, financial, institutional, and regulatory measures for improving the rational use of energy in end-use sectors. This report presents the results of additional model development activities, partly based on the first experiences in a previous project. Energy efficiency indicators have been added as an extra tool for output analysis in REDUCE. The methodology is described and some examples are given. The model has been extended with a method for modelling the effects of technical development on production costs, by means of an experience curve. Finally, the report provides a 'users guide', by describing in more detail the input data specification as well as all menus and buttons. 19 refs

  9. 78 FR 43974 - Energy and Water Use Labeling for Consumer Products Under the Energy Policy and Conservation Act...

    Science.gov (United States)

    2013-07-23

    ... FEDERAL TRADE COMMISSION 16 CFR Part 305 [3084-AB15] Energy and Water Use Labeling for Consumer Products Under the Energy Policy and Conservation Act (Energy Labeling Rule) AGENCY: Federal Trade...'') in 1979,\\1\\ pursuant to the Energy Policy and Conservation Act of 1975 (EPCA).\\2\\ The Rule requires...

  10. Fiscal 1999 technical survey report. Cooperative project on energy conservation seminar; 1999 nendo sho energy seminar kyoryoku jigyo hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    NEDO (New Energy and Industrial Technology Development Organization), from the viewpoint that the development and popularization of energy conservation technologies are extremely important as energy conservation measures, collected energy related primary information from 12 Asian countries including Japan for the development and popularization of energy conservation technologies, and has constructed a database NEDO/DB. NEDO is now propelling forward its efforts to popularize the database. For popularizing NEDO/DB in Vietnam and for rendering the people conscious of energy conservation, NEDO dispatched some lecturers to an energy conservation seminar sponsored by the Vietnamese Government. The importance of energy conservation promoting measures was highlighted at the seminar. NEDO's approach to AIJ (activities implemented jointly) and CDM (clean development mechanism) was described at the seminar, and a lecture meeting was held to explain NEDO/DB and to teach how to use the database. (NEDO)

  11. Energy conservation through the implementation of cogeneration and grid interconnection

    International Nuclear Information System (INIS)

    Dashash, M. A.

    2007-01-01

    With increasing awareness of energy conservation and environmental protection, the Arab World is moving to further improve energy conversion efficiency. The equivalent of over 2.7 MM bbl is being daily burnt to fuel the thermal power plants that represent 92% of the total Arab power generation. This adds up to close to one billion barrels annually. At a conservative 30$ per barrel, this represents a daily cost of over $81 Million. This paper will introduce two strategies with the ultimate objective to cut-off up to half of the current fuel consumption. Firstly, Cogeneration Technology is able to improve thermal efficiency from the current average of less than 25% to up to 80%. Just 1% improvement in power plant thermal efficiency represents 3 million $/day in fuel cost savings. In addition, a well-designed and operated cogeneration plant will: - Reduce unfriendly emissions by burning less fuel as a result of higher thermal efficiency, - Increase the decentralization of electrical generation, - Improve the reliability of electricity supply. As an example, the Kingdom of Saudi Arabia's experience of implementing cogeneration will be presented, in particular within its hydrocarbon facilities and desalination plants. This will include the existing facilities and the planned and on-going projects. Secondly, by interconnecting the power networks of all the adjacent Arab countries, the following benefits could be reached: - Reduce generation reserves and enhance the system reliability, - Improve the economic efficiency of the electricity power systems, - Provide power exchange and strengthen the supply reliability, - Adopt technological development and use the best modern technologies. At least two factors plead for this direction. On one hand, the four-hour time zone difference from Eastern to Western Arab World makes it easy to exchange power. On the other hand, this will help to reduce the reserve capacity and save on corresponding Capital investment, fuel, and O and M

  12. Ultra-high energy physics and standard basic principles

    Directory of Open Access Journals (Sweden)

    Gonzalez-Mestres Luis

    2014-04-01

    Full Text Available It has not yet been elucidated whether the observed flux suppression for ultra-high energy cosmic rays (UHECR at energies above ≃ 4 x 1019 eV is a signature of the Greisen-Zatsepin-Kuzmin (GZK cutoff or a consequence of other phenomena. In both cases, violations of the standard fundamental principles of Physics can be present and play a significant role. They can in particular modify cosmic-ray interactions, propagation or acceleration at very high energy. Thus, in a long-term program, UHECR data can hopefully be used to test relativity, quantum mechanics, energy and momentum conservation, vacuum properties... as well as the elementariness of standard particles. Data on cosmic rays at energies ≃ 1020 eV may also be sensitive to new physics generated well beyond Planck scale. A typical example is provided by the search for possible signatures of a Lorentz symmetry violation (LSV associated to a privileged local reference frame (the "vacuum rest frame", VRF. If a VRF exists, the internal structure of standard particles at ultra-high energy can undergo substantial modifications. Similarly, the conventional particle symmetries may cease to be valid at such energies instead of heading to a grand unification and the structure of vacuum may no longer be governed by standard quantum field theory. Then, the question whether the notion of Planck scale still makes sense clearly becomes relevant and the very grounds of Cosmology can undergo essential modifications. UHECR studies naturally interact with the interpretation of WMAP and Planck observations. Recent Planck data analyses tend to confirm the possible existence of a privileged space direction. If the observed phenomenon turns out to be a signature of the spinorial space-time (SST we suggested in 1996-97, then conventional Particle Physics may correspond to the local properties of standard matter at low enough energy and large enough distances. This would clearly strengthen the cosmological

  13. Energy conservation in two wheeler head tube welding fixture by modeling

    Science.gov (United States)

    Kamalanathan, S.; Guruprasad, B.; Elango, A.

    2018-05-01

    Energy conservation in automotive industry plays a significant role to increase the productivity which reduces the Men, Material, and Machinery. The Automotive industry sector is one of the major sector which works in two or more times of loading of work pieces in welding fixture. It consumes more energy. This project focuses on reduce the energy consumption by applying single time loading of work pieces with minimum number of labours, machine and reduces scrap. Welding fixtures are designed for the components which are difficult to weld in normal way or without any holding unit. The fixture is to be designed for the two wheeler head tube assembly which is to be welded with its companion for its application. It is demonstrated by modelling in Uni-graphics Software and FEA analysis will be done by ANSYS and experimentally products are tested and execute in industry. A code of practice suggested establishing acceptable standard for energy used in Automotive industry.

  14. 45 CFR 1180.70 - Guidelines and standards for museum conservation projects.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Guidelines and standards for museum conservation projects. 1180.70 Section 1180.70 Public Welfare Regulations Relating to Public Welfare (Continued..., as applied to art, history, natural history, science and technology, and living collections: (1...

  15. Substantial energy conservation in air conditioners; Substantiele energiebesparing bij luchtbehandelingsinstallaties

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    An air conditioner has been retrofitted by application of an optimized fan in combination with an EC motor (brushless dc-motor). Attention is paid to the difference between an AC- and and EC motor, between free-running and spiral housing fans, between direct or indirect-driven, and between forward-bended and backward-bended blades. By means of equations and diagrams the realized energy conservation is visualized. [Dutch] De renovatie van een luchtbehandelingskast wordt besproken. Door de toepassing van ventilatoren met een geoptimaliseerde waaier in combinatie met een EC-motor (borstelloze gelijkstroommotor) wordt een substantiele energiebesparing gerealiseerd. Er wordt op verschillende aspecten ingegaan. Onder meer het verschil tussen een AC- en EC-motor, tussen vrijlopende en slakkenhuisventilatoren, tussen direct- of indirect-gedreven schoepen en tussen voorwaarts- of achterwaartsgebogen schoepen. Aan de hand van vergelijkingen en diagrammen wordt de energiewinst zichtbaar gemaakt.

  16. 78 FR 68331 - Energy Conservation Program: Request for Exclusion of 100 Watt R20 Short Incandescent Reflector...

    Science.gov (United States)

    2013-11-14

    ... attempt to replace the same lamp that was previously installed. It is not typical consumer behavior to... energy conservation standards for certain commercial and industrial equipment and various consumer... Characteristics in Substitutes 1. Improved R20 Short Lamp 2. 60 W PAR16 Lamp 3. LED Lamps 4. Consumer Use of...

  17. Low Energy Technology. A Unit of Instruction on Energy Conservation in Field Crop Production.

    Science.gov (United States)

    Davis, George; Scanlon, Dennis C.

    This unit of instruction on energy conservation in field crop production was designed for use by agribusiness and natural resources teachers in Florida high schools and by agricultural extension agents as they work with adults and students. It is one of a series of 11 instructional units (see note) written to help teachers and agents to educate…

  18. Solar Energy: Energy Conservation and Passive Design Concepts: Student Material. First Edition.

    Science.gov (United States)

    Younger, Charles; Orsak, Charles G., Jr.

    Designed for student use in "Energy Conservation and Passive Design Concepts," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, bibliographies, and illustrations for seven course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

  19. Performance of two Vermont elementary school integrated energy conservation/solar energy retrofit projects

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, J.W. (Marlboro College, VT); Converse, A.O.

    1980-01-01

    Two Vermont elementary school energy conservation/passive solar energy retrofit projects are described. Both masonry buildings were insulated with polystyrene on the east, north and west exterior walls. The south walls of each building were converted to Trombe walls, and, in addition, a portion of the south wall of one building was fitted with a solar greenhouse. The construction details, the predicted performance, and some actual results are reported here.

  20. Energy conservation: policy issues and end-use scenarios of savings potential. Part V. Energy efficient buildings: the causes of litigation against energy conservation building codes

    Energy Technology Data Exchange (ETDEWEB)

    Benenson, P.; Codina, R.; Cornwall, B.

    1978-09-01

    The guidelines laid out for the five subjects investigated in this series are to take a holistic view of energy conservation policies by describing the overall system in which they are implemented; provide analytical tools and sufficiently disagregated data bases that can be adapted to answer a variety of questions by the users; identify and discuss some of the important issues behind successful energy conservation policy; and develop an energy conservation policy in depth. Three specific cases reviewed are: the California nonresidential code (1976); the California residential code (1978); and the Farmers Home Administration code (1978). Although these three suits were brought by the building industry, this report also discusses considerations relevant to architects, bankers, and building inspectors. These cases are discussed from three perspectives: (1) objections to the codes explicitly stated in court, (2) industry conditions and practices behind objections stated in court, and (3) general beliefs not stated in court. This discussion focuses on suits intended to limit those building codes which the building industry sees as too strong. However, some energy conservation industries may sue to strengthen codes which they consider too weak. An example of such a case is Polarized Corporation's current suit against the Lighting section of ASHRAE 90-75 (Los Angeles Federal District Court, see Murnane, 1978). (MCW)

  1. Countermeasures for Developing New Energy Bus Standards in China

    Science.gov (United States)

    Shi, Xin

    2018-01-01

    With the rapid development of new energy vehicle technology, new energy bus has become more and more popular in China, and the relevant standards and policy are urgently needed to guide the market. According to the assessment of the development situation on new energy vehicle technology and new energy bus, combing with traffic policy guidance and the development trend of new energy vehicles, this paper aims to put forward the countermeasures of the new energy bus standard in China, including standard system, key standards and relevant recommendations. Research result is expected to provide decision support for the wide application of new energy bus in China.

  2. Energy conservation education. Need for coordination; Enoek-undervisning. Behov for koordinering

    Energy Technology Data Exchange (ETDEWEB)

    Novakovic, V

    1994-05-01

    This paper discusses the energy conservation education at university level in Norway. The energy law of 29 june 1990 marks a turning point in the Norwegian energy policy; the market forces are introduced as the most important means of achieving an efficient socio-economic management of the energy resources. The importance of energy conservation is more fully appreciated. The Government can motivate energy conservation in many ways, above all by means of information and training. The position of coordinator for teaching energy conservation was created at NTH (Norwegian Institute of Technology) in 1989. Later a professorship in energy conservation has been established there. The area of activity of the professor is limited to stationary energy use in buildings and industry. 5 refs.

  3. Effects of energy conservation programs: report to IEA (International Energy Agency) Annex 7, Local Government Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Klingberg, T.; Benton, L.; Engebeck, L.; Erikson, B.E.; Fredriksson, G.

    1984-01-01

    This Bulletin is an anthology of 13 essays by different authors covering various aspects of government programs for energy conservation. In six essays effects of energy codes, subsidies to conservation measures in buildings and advisory services are discussed. Results from several empirical studies are presented. Five essays deal with side-effects (or secondary effects) of energy conservation. Moisture and increased radiation from radon are two types of negative effects that are covered. Also positive effects such as promotion of innovations or increased employment are discussed. Policy instruments are normally implemented by the local authorities. This is illustrated by a description of energy planning for a new suburb in one municipality. Some tentative conclusions are presented in the final essay.

  4. 75 FR 28801 - Energy Efficiency and Conservation Block Grant Program: Funding Opportunity Announcement (DE-FOA...

    Science.gov (United States)

    2010-05-24

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Efficiency and... Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of application deadline guideline...-FOA-0000013) for the formula grants of the Energy Efficiency and Conservation Block Grant (EECBG...

  5. Energy conservation in coal conversion. Final report, September 15, 1977--September 1, 1978. Selected case studies and conservation methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Purcupile, J.C.

    1978-09-01

    The purpose of this study is to apply the methodologies developed in the Energy Conservation in Coal Conversion August, 1977 Progress Report - Contract No. EY77S024196 - to an energy efficient, near-term coal conversion process design, and to develop additional, general techniques for studying energy conservation and utilization in coal conversion processes. The process selected for study was the Ralph M. Parsons Company of Pasadena, California ''Oil/Gas Complex, Conceptual Design/Economic Analysis'' as described in R and D Report No. 114 - Interim Report No. 4, published March, 1977, ERDA Contract No. E(49-18)-1975. Thirteen papers representing possible alternative methods of energy conservation or waste heat utilization have been entered individually into EDB and ERA. (LTN)

  6. Conservation

    NARCIS (Netherlands)

    Noteboom, H.P.

    1985-01-01

    The IUCN/WWF Plants Conservation Programme 1984 — 1985. World Wildlife Fund chose plants to be the subject of their fund-raising campaign in the period 1984 — 1985. The objectives were to: 1. Use information techniques to achieve the conservation objectives of the Plants Programme – to save plants;

  7. Conservation.

    Science.gov (United States)

    National Audubon Society, New York, NY.

    This set of teaching aids consists of seven Audubon Nature Bulletins, providing the teacher and student with informational reading on various topics in conservation. The bulletins have these titles: Plants as Makers of Soil, Water Pollution Control, The Ground Water Table, Conservation--To Keep This Earth Habitable, Our Threatened Air Supply,…

  8. The potential energy conservation of the Dutch industrial, business and service sector

    International Nuclear Information System (INIS)

    Van der Werff, R.L.; Opschoor, J.B.

    1992-01-01

    The database ICARUS has been used as a starting point to estimate the economical potential for energy conservation in different sectors of the Dutch society. ICARUS is based on research on real energy consuming processes and applications in a number of sub-sectors of the Dutch economy. The present energy conservation potential in the Netherlands is based on energy conservation studies in the Netherlands and other countries. For this article the economical efficient energy conservation potentials in 1992 have been investigated for the Dutch sectors, which do not supply energy. The potentials are determined on the basis of the technical energy conservation potentials for the year 2000, according to the database ICARUS. Two methods were used to extract the economic potential from the technical potential: the method of the Net Market Value and the method of the payback period. From the ICARUS analysis it appears that the technical potential for energy conservation is 479 PJ, which is 28.8% of the primary energy consumption of 1664 PJ in 1985. The economic energy conservation potential is 262 PJ for a payback period of less than five years, which is 17% of the 1985 primary energy consumption. Next to the above-mentioned analysis policy-aimed simulations were carried out for three scenarios to determine economical energy conservation potentials. In one scenario doubled energy prices were used in comparison with the 1991 prices. Another scenario uses the Net Market Value method with a 5% discount rate, and the third scenario uses both parameters

  9. 78 FR 37995 - Energy Efficiency Standards for Manufactured Housing

    Science.gov (United States)

    2013-06-25

    ... Efficiency Standards for Manufactured Housing AGENCY: Office of Energy Efficiency and Renewable Energy... in receiving information that relates to the relationship between energy efficiency and indoor air... higher energy efficiencies, and possible enforcement models for the DOE standards. This notice identifies...

  10. Energy management action plan: Developing a strategy for overcoming institutional barriers to municipal energy conservation

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    Energy offices working to improve efficiency of local government facilities face not only technical tasks, but institutional barriers, such as budget structures that do not reward efficiency, a low awareness of energy issues, and purchasing procedures based only on minimizing initial cost. The bureau, in working to remove such barriers in San Francisco, has identified 37 institutional barriers in areas such as operations & maintenance, purchasing, and facility design; these barriers were then reorganized into three groupings-- policy & attitudes, budget & incentives, and awareness & information-- and mapped. This map shows that the barriers mutually reinforce each other, and that a holistic approach is required for permanent change. The city`s recreation & parks department was used as a model department, and information about facility energy use was compiled into a departmental energy review. Staff interviews showed how barriers affect conservation. The bureau then generated ideas for projects to remove specific barriers and rated them according to potential impact and the resources required to implement them. Four of the six projects selected focused on maintenance staff: a cost- sharing lighting retrofit program, a boiler efficiency program, a departmental energy tracking system, and a budgetary incentive program for conservation. The other two projects are city-wide: promotion of a new term contract supplying energy-efficient light materials, and publication/distribution of ENERGY NEWS newsletter. A general methodology, the EMAP Strategy Guide, has been created to assist other energy offices in developing EMAPs.

  11. Energy management: a program of energy conservation for the community college facility. [Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Various Authors

    1978-01-01

    This handbook developes helps for assessing and improving the energy efficiency of the community-college facility. The TEEM approach (Total Educational Energy Management) is a labor-intensive approach which requires the commitment and participation of all segments of the college community. The TEEM program presented here defines a series of tasks selected, ordered, and implemented in such a way as to achieve two basic objectives: (1) reducing campus energy requirements, and (2) meeting those reduced energy requirements more efficiently without adversely affecting the quality of educational programs. This guide to large-scale energy conservation on college campuses includes step-by-step procedures for establishing a program task force, defining specific tasks, and assigning responsibilities. Action plans are developed, energy consumption monitored, goals set, and conservation measures implemented. A series of appendices provides more detailed information, charts, and worksheets related to all aspects of energy use. The TEEM program provides the basic structure for achieving a significant reduction in campus energy costs.

  12. Data on electrical energy conservation using high efficiency motors for the confidence bounds using statistical techniques.

    Science.gov (United States)

    Shaikh, Muhammad Mujtaba; Memon, Abdul Jabbar; Hussain, Manzoor

    2016-09-01

    In this article, we describe details of the data used in the research paper "Confidence bounds for energy conservation in electric motors: An economical solution using statistical techniques" [1]. The data presented in this paper is intended to show benefits of high efficiency electric motors over the standard efficiency motors of similar rating in the industrial sector of Pakistan. We explain how the data was collected and then processed by means of formulas to show cost effectiveness of energy efficient motors in terms of three important parameters: annual energy saving, cost saving and payback periods. This data can be further used to construct confidence bounds for the parameters using statistical techniques as described in [1].

  13. Developing the (ASTM) voluntary consensus standards required to help implement the National Energy Plan

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The recommended guide is the first American Society for Testing and Materials (ASTM) matrix in a family of such documents that combined, will help manage the development of the ASTM standards considered necessary to implement the current National Plan for Energy Research, Development, and Demonstration. It is expected that the guide will provide a framework for standards development to complement the nation's research and development in support of critical energy needs. The recommended guide identifies the energy-critical areas that are to be developed, the master ASTM recommended guide for developing the standards required to help the National Plan, the section in which each energy-critical area is covered, and the suggested ASTM lead committee responsible for each area (fossil, solar, geothermal, conservation, fusion, and fission reactor development). A comprehensive matrix to identify the areas of need for which ASTM standards will be required to help implement the National Energy Plan is also presented

  14. 10 CFR 455.110 - Grant application submittals for technical assistance and energy conservation measures.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 3 2010-01-01 2010-01-01 false Grant application submittals for technical assistance and... Grant application submittals for technical assistance and energy conservation measures. (a) Each... assistance for energy conservation measures, including renewable resource measures, shall include the...

  15. 75 FR 64173 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-10-19

    ... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment AGENCY: Office of Energy... notice of proposed rulemaking, regarding the Energy Conservation Program: Certification, Compliance, and...

  16. Energy conservation in the residential sector : The role of policy and market forces

    NARCIS (Netherlands)

    Aydin, Erdal

    2016-01-01

    In recent years, energy conservation has been a hot topic of debate among policy makers and researchers due to the concerns about global climate change and energy dependency. From a policy perspective, residential sector has been an important target for energy conservation policies as it is a major

  17. 77 FR 49063 - Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products

    Science.gov (United States)

    2012-08-15

    ... Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products; Proposed...-AC01 Energy Conservation Program: Test Procedures for Residential Dishwashers and Cooking Products... procedures for both dishwashers and conventional cooking products for the measurement of energy use in fan...

  18. 76 FR 12825 - Energy Conservation Program for Consumer Products: Test Procedure for Microwave Ovens

    Science.gov (United States)

    2011-03-09

    ... Conservation Program for Consumer Products: Test Procedure for Microwave Ovens AGENCY: Office of Energy.... Department of Energy (DOE) is amending its test procedures for microwave ovens under the Energy Policy and Conservation Act (EPCA) to provide for the measurement of standby mode and off mode power use by microwave...

  19. The Modern History of Energy Conservation: An Overview for Information Professionals

    OpenAIRE

    Wulfinghoff, Donald R.

    2000-01-01

    The current electricity crisis in California, along with high petroleum and natural gas prices everywhere, reminds us that energy conservation is a key to our survival as a civilization. This critical guide by the author of the Energy Efficiency Manual presents credible information sources on energy conservation.

  20. 75 FR 57555 - Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers

    Science.gov (United States)

    2010-09-21

    ... technologies not covered by the current procedure; (2) more accurately reflect current consumer behavior and... Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products... [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test...

  1. 75 FR 57556 - Energy Conservation Program for Consumer Products: Test Procedure for Residential Clothes Washers

    Science.gov (United States)

    2010-09-21

    ... technologies not covered by the current procedure; (2) more accurately reflect current consumer behavior and... Part II Department of Energy 10 CFR Part 430 Energy Conservation Program for Consumer Products... [Docket No. EERE-2010-BT-TP-0021] RIN 1904-AC08 Energy Conservation Program for Consumer Products: Test...

  2. Energy conservation for houses and its calculation methods

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S H

    1981-04-01

    The concept of energy conservation of houses has been developed and began to be applied widely since the first oil crisis. Now we can say definitely that insulating a house is the most effective way of saving energy, and the renewable energy sources are useful only when the demand for space heating and hot water is minimized by insulating. If a house is well insulated, it will need a much smaller, simpler and cheaper heating system. So it will be less efficient to put a solar collector and wind generator on a poorly insulated house. Architects and engineers should have a certain level of practical knowledge of insulation for house to persuade customers using insulating materials and structure. Moreover, it is very essential to amend the existing building codes in order to facilitate this basic necessity. For instance, the Building Regulations of Denmark requires a U-value of 0.4 W/m/sup 2/ degC for heavy weight external wall. If the cavity wall has outer and inner leaf of just normal brick with internal finish of 20 mm cement mortar, which is a typical wall construction for houses in Korea, the thickness of insulation materials to the cavity can be calculated in order to fullfil the U-value of 0.4 W/m/sup 2/ degC in addition to the cavity of the external heavy wall: expanded polyurethane 58 mm, urea formaldehyde foam 67 mm, expanded polystyrene 78 mm, mineral wool 94 mm. The economic feasibility of solar heating system has been calculated. By applying 25% of the year inflation ratio for fuel cost, the result turns out economically comparable with solar heating systems.

  3. Development of marine renewable energies and biodiversity conservation - Renewable energies Volume 2

    International Nuclear Information System (INIS)

    Peguin, Marion; Le Visage, Christophe; Rolland, Guillemette; Moncorps, Sebastien

    2014-09-01

    After a presentation of the different challenges related to the development of marine renewable energies (energy challenges, conservation of the marine environment, regulatory context), this document proposes a presentation of the different marine renewable energy sectors (status of research, techniques, required conditions, and potential opportunities in France). It presents an assessment of impacts of these different sectors and some recommendations related to various opportunities and threats (noise and vibration, habitat modification, risks of collisions, residual impacts). After a synthesis, thematic sheets are proposed on biodiversity protocols, cumulative impacts, marine protected areas, connection issues, and dismantling issues

  4. BPA's Eighth Annual Energy Conservation Management Conference : Proceedings.

    Energy Technology Data Exchange (ETDEWEB)

    Energy Conservation Management Conference (8th : 1981); United States. Bonneville Power Administration.

    1981-01-01

    The five-year energy conservation program at Bonneville Power Administration (BPA) is described at the conference. An overview of the program is presented. Topics covered in panel discussions include: how utilities can work effectively with weatherization contractors, homebuilders, energy auditors, and weatherization material suppliers; mechanisms for implementing conservation programs in the commercial sector; experiences gained in existing residential weatherization programs; and streamlining relationships between consumers, utilities, and BPA in providing services and getting feedback. The planning, programming, technical assistance, and engineering thrusts of BPA's conservation programs are discussed. Indoor air quality, renewable energy, and the regulator's role in relationships to energy conservation are discussed. Passive solar programs, DOE initiatives in solar and conservation for buildings, conservation potential in the commercial and industrial sectors, and current conservation research and development are also discussed. (MCW)

  5. 77 FR 23238 - Guidelines for Home Energy Professionals: Standard Work Specifications for Single Family Energy...

    Science.gov (United States)

    2012-04-18

    ...: Comments on the Guidelines for Home Energy Professionals: Standard Work Specifications for Single Family... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Guidelines for Home Energy Professionals: Standard Work Specifications for Single Family Energy Upgrades AGENCY: Office of Energy...

  6. Annual Report on Federal Government Energy Management and Conservation Programs, Fiscal Year 2010

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-03-01

    Annual reports on Federal energy management respond to section 548 of the National Energy Conservation Policy Act (NECPA, Pub. L. No. 95-619), as amended, and provide information on energy consumption in Federal buildings, operations, and vehicles. Compiled by the Federal Energy Management Program, these reports document activities conducted by Federal agencies under the: Energy management and energy consumption requirements of section 543 of NECPA, as amended (42 U.S.C. § 8253); Energy savings performance contract authority of section 801 of NECPA, Pub. L. No. 95-619, as amended (42 U.S.C. §§ 8287-8287d); Renewable energy purchase goal of section 203 of the Energy Policy Act (EPAct) of 2005, Pub. L. No. 109-58 (codified at 42 U.S.C. § 15852); Federal building performance standard requirements under Section 109 of EPAct 2005, Pub. L. No. 109-58 (codified at 42 U.S.C. § 6834(a)); Requirements on the procurement and identification of energy efficient products under section 161 of EPAct 1992, Pub. L. No. 102-486 (codified at 42 U.S.C. § 8262g); Sections 431, 432, and 434 of the Energy Independence and Security Act of 2007 (EISA), Pub. L. No. 110-140 (42 U.S.C. § 8253) and section 527 of EISA (42 U.S.C. § 17143); Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management, 72 Fed. Reg. 3,919 (Jan. 26, 2007); Executive Order 13514, Federal Leadership in Environmental, Energy, and Economic Performance, 74 Fed. Reg. 52,117 (Oct. 5, 2009).

  7. Annual Report on Federal Government Energy Management and Conservation Programs, Fiscal Year 2013

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-04-01

    Annual reports on Federal energy management respond to section 548 of the National Energy Conservation Policy Act (NECPA, Pub. L. No. 95-619), as amended, and provide information on energy consumption in Federal buildings, operations, and vehicles. Compiled by the Federal Energy Management Program, these reports document activities conducted by Federal agencies under the: Energy management and energy consumption requirements of section 543 of NECPA, as amended (42 U.S.C. § 8253); Energy savings performance contract authority of section 801 of NECPA, Pub. L. No. 95-619, as amended (42 U.S.C. §§ 8287-8287d); Renewable energy purchase goal of section 203 of the Energy Policy Act (EPAct) of 2005, Pub. L. No. 109-58 (codified at 42 U.S.C. § 15852); Federal building performance standard requirements under Section 109 of EPAct 2005, Pub. L. No. 109-58 (codified at 42 U.S.C. § 6834(a)); Requirements on the procurement and identification of energy efficient products under section 161 of EPAct 1992, Pub. L. No. 102-486 (codified at 42 U.S.C. § 8262g); Sections 431, 432, and 434 of the Energy Independence and Security Act of 2007 (EISA), Pub. L. No. 110-140 (42 U.S.C. § 8253) and section 527 of EISA (42 U.S.C. § 17143); Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management, 72 Fed. Reg. 3,919 (Jan. 26, 2007); Executive Order 13514, Federal Leadership in Environmental, Energy, and Economic Performance, 74 Fed. Reg. 52,117 (Oct. 5, 2009).

  8. Annual Report on Federal Government Energy Management and Conservation Programs, Fiscal Year 2012

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-03-01

    Annual reports on Federal energy management respond to section 548 of the National Energy Conservation Policy Act (NECPA, Pub. L. No. 95-619), as amended, and provide information on energy consumption in Federal buildings, operations, and vehicles. Compiled by the Federal Energy Management Program, these reports document activities conducted by Federal agencies under the: Energy management and energy consumption requirements of section 543 of NECPA, as amended (42 U.S.C. § 8253); Energy savings performance contract authority of section 801 of NECPA, Pub. L. No. 95-619, as amended (42 U.S.C. §§ 8287-8287d); Renewable energy purchase goal of section 203 of the Energy Policy Act (EPAct) of 2005, Pub. L. No. 109-58 (codified at 42 U.S.C. § 15852); Federal building performance standard requirements under Section 109 of EPAct 2005, Pub. L. No. 109-58 (codified at 42 U.S.C. § 6834(a)); Requirements on the procurement and identification of energy efficient products under section 161 of EPAct 1992, Pub. L. No. 102-486 (codified at 42 U.S.C. § 8262g); Sections 431, 432, and 434 of the Energy Independence and Security Act of 2007 (EISA), Pub. L. No. 110-140 (42 U.S.C. § 8253) and section 527 of EISA (42 U.S.C. § 17143); Executive Order 13423, Strengthening Federal Environmental, Energy, and Transportation Management, 72 Fed. Reg. 3,919 (Jan. 26, 2007); Executive Order 13514, Federal Leadership in Environmental, Energy, and Economic Performance, 74 Fed. Reg. 52,117 (Oct. 5, 2009).

  9. Energy conservation potential in China’s petroleum refining industry: Evidence and policy implications

    International Nuclear Information System (INIS)

    Lin, Boqiang; Xie, Xuan

    2015-01-01

    Highlights: • A long-term equilibrium relationship of energy demand in China’s petroleum refining industry is established. • The sectoral energy conservation potential is evaluated by using scenarios analysis. • Energy prices, enterprise scale, R and D investment and ownership structure affect electricity intensity. • Future policy for energy conservation in China’s petroleum refining industry is suggested. - Abstract: China is currently the second largest petroleum refining country in the world due to rapid growth in recent years. Because the petroleum refining industry is energy-intensive, the rapid growth in petroleum refining and development caused massive energy consumption. China’s urbanization process will guarantee sustained growth of the industry for a long time. Therefore, it is necessary to study the energy conservation potential of the petroleum industry. This paper estimates the energy conservation potential of the industry by applying a cointegration model to investigate the long-run equilibrium relationship between energy consumption and some factors such as energy price, enterprise scale, R and D investment and ownership structure. The results show that R and D investment has the greatest reduction impact on energy intensity, and the growth of market participants (i.e. the decline of the share of state-owned companies) can improve energy efficiency of this industry. Under the advanced energy-saving scenario, the accumulated energy conservation potential will reach 230.18 million tons of coal equivalent (tce). Finally, we provide some targeted policy recommendations for industrial energy conservation

  10. Current situation of energy conservation in high energy-consuming industries in Taiwan

    International Nuclear Information System (INIS)

    Chan, D.Y.-L.; Yang, K.-H.; Hsu, C.-H.; Chien, M.-H.; Hong, G.-B.

    2007-01-01

    Growing concern in Taiwan has arisen about energy consumption and its adverse environmental impact. The current situation of energy conservation in high energy-consuming industries in Taiwan, including the iron and steel, chemical, cement, pulp and paper, textiles and electric/electrical industries has been presented. Since the energy consumption of the top 100 energy users (T100) comprised over 50% of total industry energy consumption, focusing energy consumption reduction efforts on T100 energy users can achieve significant results. This study conducted on-site energy audits of 314 firms in Taiwan during 2000-2004, and identified potential electricity savings of 1,022,656 MWH, fuel oil savings of 174,643 kiloliters (KL), steam coal savings of 98,620 ton, and natural gas (NG) savings of 10,430 kilo cubic meters. The total potential energy saving thus was 489,505 KL of crude oil equivalent (KLOE), representing a reduction of 1,447,841 ton in the carbon dioxide emissions, equivalent to the annual carbon dioxide absorption capacity of a 39,131-ha plantation forest

  11. Problems in the implementation of energy conservation measures. II. Consumer motivation

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, P. H.

    1977-10-15

    During the course of 1975 a national survey of household attitudes to energy use and conservation was undertaken. The study suggested that while the public are generally in favor of energy conservation, they do not practice it. The study highlighted the need to do more than merely raise the level of awareness of the need for energy conservation. The energy intensive nature of our life-style was identified as a critical constraint on the implementations of effective voluntary energy conservation programs. It was suggested that our pattern of energy use is so deeply embedded in our everyday behaviors that it would take more than the presentation of information to produce the necessary changes in behavior. Some of the problems involved in attempting to motivate the consumer to conserve energy using either an extrinsic or instrinsic motivational approach are explored. A general model of the energy system is employed to illustrate that changes in the informational environment must be accompanied by changes in the institutional environment if pro-conservation attitudes are to be converted into conserving behavior. The case of personal transportation is used to indicate the need for a comprehensive package of measures which not only motivate the consumer but also facilitate and reinforce positive behavior if the dual goals of satisfying personal mobility needs and energy conservation are to be satisfied.

  12. Energy Conservation Behaviour Toolkit. Incentive Mechanisms for effective decrease of energy consumption at the workplace

    Energy Technology Data Exchange (ETDEWEB)

    Boerner, D.; Kalz, M.; Ternier, S.; Specht, M. [Centre for Learning Sciences and Technologies CELSTEC, Open Universiteit, Heerlen (Netherlands)

    2013-01-15

    The work in this project is based on a previous project (Energy Awareness Displays - Making the Invisible Visible) in which several measurement and visualization approaches have been developed to make employees more aware about energy consumption and pro-environmental behavior at the workplace. While awareness is a first important step for the decrease of energy consumption and environmental learning it is not sufficient as a means for sustainable behavior change. For this reason we have explored in the follow-up project approaches how pro-environmental behavior at the workplace can be encouraged, rewarded and sustained. For this purpose we have implemented several technological solutions and we have piloted these in form of an energy conservation game called Mindergie at the main campus of the Open University in Heerlen, Netherlands. The project is in line with an earlier identified research gap in terms of energy conservation at the workplace and uses state-of-the-art technologies for mobile gaming and rewarding of non-formal learning activities.

  13. Stimulating energy conservation: the use of the opinion-leadership process

    Energy Technology Data Exchange (ETDEWEB)

    Yavas, U [Univ. of Petroleum and Minerals, Dhahran, Saudi Arabia; Riecken, G

    1981-09-01

    While the US federal government, public utilities and oil companies, among others, have instigated programs to educate the general public on energy conservation and to stimulate an energy-conservation ethic, results of a number of surveys indicate that such efforts in promoting energy conservation have had only limited success. This may be particularly attributable to the low credibility ascribed by the public to energy-information-disseminating sources. This article investigates the feasibility of utilizing opinion leadership, an untried approach, to overcome the credibility problem in disseminating energy information to the general public. 23 references, 4 tables.

  14. Energy efficiency of residential buildings. Energy consumption and investment costs of different building energy standards; Energieeffizienz von Wohngebaeuden. Energieverbraeuche und Investitionskosten energetischer Gebaeudestandards

    Energy Technology Data Exchange (ETDEWEB)

    Beecken, Christoph; Schulze, Stephan [Bow Ingenieure GmbH, Braunschweig (Germany)

    2011-12-15

    In view of the impending energy transition in Germany, turning away from fossil fuels and atomic power and leading to renewable energy sources, the construction of very energy efficient new buildings gains more and more in importance. Because the saving of energy with efficient buildings offers the highest potential to achieve the energy transition without loss of comfort and also complying with the climate protection target of limitation of the carbon dioxide emission. For new buildings in the initial project planning phase, the client needs qualified consulting concerning a reasonable energy standard for his building. The consulting should comprise the multitude of energy efficiency standards and the related financial incentives and not only cover the minimum standard of the German Building Energy Conservation Regulation EnEV (Energieeinsparverordnung). But the architect can hardly quantify the potentials to reduce energy consumption of buildings considering the multitude of existing standards with multifarious effects on energy consumption, technical requirements and building costs. With the help of an example multi-storey residential building in Hannover, current energy standards for residential buildings are compared. Besides the building construction also the building services like heating, hot water generation and ventilation are considered and the most important results concerning energy consumption and investment costs are compared.

  15. 10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

    Science.gov (United States)

    2010-01-01

    ... have a personal and sustained commitment to the program, provide active direction and motivation, and... energy conservation. (7) Employee Awareness. Employees must gain an awareness of energy conservation through formal training and employee information programs. They should be invited to participate in the...

  16. 75 FR 57410 - Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and...

    Science.gov (United States)

    2010-09-21

    ..., regarding the Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products... [Docket No. EERE-2010-BT-CE-0014] RIN 1904-AC23 Energy Conservation Program: Certification, Compliance, and Enforcement for Consumer Products and Commercial and Industrial Equipment; Correction AGENCY...

  17. 77 FR 76972 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

    Science.gov (United States)

    2012-12-31

    ... motors and pumps and certain other industrial equipment to conserve the energy resources of the nation... the efficiency of electric motors, pumps and certain other industrial equipment to conserve the energy... electric motors as covered equipment. A compressor may have some or all of the following components: piston...

  18. 75 FR 42612 - Energy Conservation Program for Consumer Products: Test Procedure for Microwave Ovens

    Science.gov (United States)

    2010-07-22

    ... Conservation Program for Consumer Products: Test Procedure for Microwave Ovens AGENCY: Office of Energy... (NOPR) in which DOE proposed test procedures for microwave ovens under the Energy Policy and Conservation Act (EPCA) to measure standby mode and off mode power use by microwave ovens. To address issues...

  19. ASEAN-USAID Buildings Energy Conservation Project. Final report, Volume 3: Audits

    Energy Technology Data Exchange (ETDEWEB)

    Loewen, J.M.; Levine, M.D.; Busch, J.F. [eds.

    1992-06-01

    The auditing subproject of the ASEAN-USAID Buildings Energy Conservation Project has generated a great deal of auditing activity throughout the ASEAN region. Basic building characterisfic and energy consumption data were gathered for over 200 buildings and are presented in this volume. A large number of buildings were given more detailed audits and were modeled with either the ASEAM-2 computer program or the more complex DOE-2 program. These models were used to calculate the savings to be generated by conservabon measures. Specially audits were also conducted, including lighting and thermal comfort surveys. Many researchers in the ASEAN region were trained to perform energy audits in a series of training courses and seminars. The electricity intensifies of various types of ASEAN buildings have been calculated. A comparison to the electricity intensity of the US building stock tentatively concludes that ASEAN office buildings are comparable, first class hotels and retail stores are more ewctricity intensive than their US counterparts, and hospitals are less intensive. Philippine and Singapore lighting surveys indicate that illuminance levels in offices tend to be below the minimum accepted standard. Computer simulations of the energy use in various building types generally agree that for most ASEAN buildings, electricity consumption for air-conditioning (including fan power) consumes approximately 60% of total building electricity. A review of the many studies made during the Project to calculate the savings from energy conservation opportunities (ECOS) shows a median potential savings of approximately 10%, with some buildings saving as much as 50%. Singapore buildings, apparently as a result of previously implemented efficient energy-use practices, shows a lower potential for savings than the other ASEAN nations. Air-conditioning ECOs hold the greatest potential for savings.

  20. Worldwide status of energy standards for buildings: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Janda, K.B.; Busch, J.F.

    1993-02-01

    This informal survey was designed to gain information about the worldwide status of energy efficiency standards for buildings, particularly non-residential buildings such as offices, schools, and hotels. The project has three goals: 1. To understand and learn from the experience of countries with existing building energy standards; 2. To locate areas where these lessons might be applied and energy standards might be effectively proposed and developed; and 3. To share the information gathered with all participating countries. These appendices include the survey cover letter, the survey, and the details of selected energy standards in 35 countries, thus providing supporting material for the authors` article of the same title.