Fissure fillings from Gideaa, central Sweden

International Nuclear Information System (INIS)

Tullborg, E.L.; Larsson, S.Aa.

1983-08-01

The most frequent fissure filling minerals at Gideaa are calcite, chlorite, pyrite, laumontite, stilbite, smectite, quartz and epidote. Potentially young minerals, i.e. minerals which can be formed during present conditions, are smectite, calcite and quartz, Equilibrium calculations show that these minerals can be stable in the water analysed from Gideaa. In borehole Gi 2, the water exhibits a greater equilibrium with existing minerals in the fissures than water from Gi 4. This is due to the recharge of the water in Gi 4 and discharge of the water in Gi 2. When carbonate saturated water penetrated through the bedrock, calcite precipitated within the more superficial portions of the rock. However, both calcite and zeolite fissures fillings are associated with certain zones in the drill holes. A large number of fractures can be concluded to be of post-Jotnian age. Stilbite, calcite and smectite are associated with these fractures. Laumontite can also be assumed to belong here. The dolerites in the area exhibit a high fracture frequency but a relatively low hydraulic conductivity. This is due to the fact that smectite is very prevalent in the dolerite fractures, Several generations of fracturefilling minerals (above all calcite) have been found in a single fracture. Stable isotope analyses of fissure filling calcites indicate that there are three different groups of calcite. Most of the calcites could not have been precipitated from water of present-day isotope composition at Gideaa, whereas recent calcite may be found in one of the groups. Another group of calcite was precipitated during hydro-thermal conditions.(author)

Experimental study of strontium sorption on fissure filling material

Energy Technology Data Exchange (ETDEWEB)

Eriksen, T E; Cui, Daqing [Royal Institute of Technology, Stockholm (Sweden). Dept. of Chemistry

1994-12-01

We have carried out a comparative study of sorption and desorption of strontium in groundwater on separated magnetic and size fractions of fissure filling material taken from natural fissures in granitic rock. Complete reversibility of the sorption process was demonstrated by identical Freundlich isotherms, isotopic exchangeability and pH dependence of the distribution coefficients Rd. The sorption was found to be strongly pH dependent in the range 3-11. The pH effect can be accommodated in the sorption model by considering the surface areas and surface charges of the minerals in the fissure filling material. 20 refs, 9 figs, 3 tabs.

Experimental study of strontium sorption on fissure filling material

International Nuclear Information System (INIS)

Eriksen, T.E.; Cui, Daqing

1994-12-01

We have carried out a comparative study of sorption and desorption of strontium in groundwater on separated magnetic and size fractions of fissure filling material taken from natural fissures in granitic rock. Complete reversibility of the sorption process was demonstrated by identical Freundlich isotherms, isotopic exchangeability and pH dependence of the distribution coefficients Rd. The sorption was found to be strongly pH dependent in the range 3-11. The pH effect can be accommodated in the sorption model by considering the surface areas and surface charges of the minerals in the fissure filling material. 20 refs, 9 figs, 3 tabs

Atmospheric Chemistry of (CF3)2CF-C≡N

DEFF Research Database (Denmark)

Andersen, Mads Peter Sulbæk; Kyte, Mildrid; Thirstrup Andersen, Simone

2017-01-01

FTIR/smog chamber experiments and ab initio quantum calculations were performed to investigate the atmospheric chemistry of (CF3)2CFCN, a proposed replacement compound for the industrially important sulfur hexafluoride, SF6. The present study determined k(Cl + (CF3)2CFCN) = (2.33 ± 0.87) × 10–17, k......(OH + (CF3)2CFCN) = (1.45 ± 0.25) × 10–15, and k(O3 + (CF3)2CFCN) ≤ 6 × 10–24 cm3 molecule–1 s–1, respectively, in 700 Torr of N2 or air diluent at 296 ± 2 K. The main atmospheric sink for (CF3)2CFCN was determined to be reaction with OH radicals. Quantum chemistry calculations, supported by experimental...

New diagnostic technology and hidden pits and fissures caries

Directory of Open Access Journals (Sweden)

Fabrizio Guerra

2015-10-01

Full Text Available The accuracy in pits and fissures caries detection is of paramount importance in dental caries primary and secondary prevention. A combination of visual examination and probing is currently the mainstay of occlusal caries diagnosis. Unfortunately, these types of inspection alone may leave a certain number of pit and fissure caries undetected. The Vista Cam iX fluorescence camera (Durr Dental, Bietigheim-Bissingen, Germany is a novel dental diagnostic tool for quantitative assessment of dental caries with high specificity for carious lesions detection. In the presented cases photographic images, representing the visual diagnostic approach, are applied as integration to VistaCam iX Proof images. A step-by-step sequence of inspection and assessment of operative treatment need is presented in a case of hidden pit and fissure caries on a permanent molar. Based on the reported case, it could be observed that VistaCam iX Proof shows promising results in hidden pits and fissures caries detection and could be considered a non-invasive examination method that facilitate the detection of early lesions and a potential diagnostic aid.

Diagnostic problems in the identification of fissures (incomplete fractures) in horses

International Nuclear Information System (INIS)

Huskamp, B.; Stadtbaeumer, G.; Mengeler, U.; Nowak, M.

1994-01-01

Diagnosing bone-fissures as part of examinations of lameness often confronts the examining veterinarian with problems, which can end on being forensic matters. A fissure which is an incomplete fracture, whereby the division of the continuity ends in healthy bone tissue may in some cases initially not be shown radiologically. Initially strong superior-lameness combined with part sensitivity of pressure are apparent in the area of the line of fissure without soft-tissue swelling. Depending on the localisation of the fracture minor lameness can be apparent. If a fissure has initially been diagnosed, it is necessary to examine the affected limb radiologically from at least two projections appealing the corresponding date for exposure. If the initial diagnosis can not be confirmed radiologically, diagnostic anaesthesia is permitted in exceptional cases. If there is any doubt about the result, the affected limb must be held at rest until the possibility of a fissure can be excluded. The owner of the horse must be informed about problems of diagnostics and their risks [de

The Use of Pit and Fissure Sealants—A Literature Review

Directory of Open Access Journals (Sweden)

Reem Naaman

2017-12-01

Full Text Available This paper reviews the literature and discusses the latest updates on the use of pit and fissure sealants. It demonstrates the effectiveness of pit and fissure sealants in preventing caries and the management of early carious lesions. It compares the use of different sealant materials and their indications. It describes the application technique for sealants. It also reviews the cost-effectiveness of sealants as a preventive strategy. From this review and after the discussion of recently published studies on pit and fissure sealants, it is evident that sealants are effective in caries prevention and in preventing the progression of incipient lesions. It is therefore recommended that pit and fissure sealant be applied to high-caries-risk children for optimum cost-effectiveness. It is a highly sensitive technique that needs optimum isolation, cleaning of the tooth surface, etching, and the application of a thin bonding layer for maximum benefit. Recall and repair, when needed, are important to maximize the effectiveness of such sealant use.

The Use of Pit and Fissure Sealants—A Literature Review

Science.gov (United States)

Naaman, Reem; El-Housseiny, Azza A.; Alamoudi, Najlaa

2017-01-01

This paper reviews the literature and discusses the latest updates on the use of pit and fissure sealants. It demonstrates the effectiveness of pit and fissure sealants in preventing caries and the management of early carious lesions. It compares the use of different sealant materials and their indications. It describes the application technique for sealants. It also reviews the cost-effectiveness of sealants as a preventive strategy. From this review and after the discussion of recently published studies on pit and fissure sealants, it is evident that sealants are effective in caries prevention and in preventing the progression of incipient lesions. It is therefore recommended that pit and fissure sealant be applied to high-caries-risk children for optimum cost-effectiveness. It is a highly sensitive technique that needs optimum isolation, cleaning of the tooth surface, etching, and the application of a thin bonding layer for maximum benefit. Recall and repair, when needed, are important to maximize the effectiveness of such sealant use. PMID:29563440

Preferential flow in fissured sediments in desert soils related to radioactive waste disposal

International Nuclear Information System (INIS)

Scanlon, B.R.; Raney, J.A.

1992-01-01

Unsaturated flow in fissured sediments in the Chihuahuan Desert of Texas was examined to determine if these features act as preferred pathways for water and solute transport. Fissures are surface features, or gulleys, that are underlain by fractures filled with sediment derived from surrounding areas. Hydraulic and chemical approaches were used to investigate unsaturated flow processes beneath and adjacent to fissures, and the results were compared with data from surrounding geomorphic systems such as arroyos, ephemeral streams, and interstreams. Typically, high water potentials in surficial sediments result from infiltration of recent precipitation. Below this surficial zone of high water potentials lies a zone of low water potentials that is much thinner beneath the fissure than in adjacent sediments or in sediments beneath ephemeral streams and interstreams. Maximum chloride concentrations in profiles in the near-surface fissured sediments were much lower than those measured in all other geomorphic systems. The corresponding moisture velocities in the fissured sediments ranged from 10 to 70 mm/yr. A tracer experiment demonstrated higher downward water and solute transport in the fracture fill beneath the fissure relative to adjacent sediments. Numerical simulations of the tracer experiment with the computer code TRACR3D reproduced the overall shape of the tracer plume. Sensitivity analyses demonstrated that the tracer plume is most sensitive to spatial variability in soil texture and the corresponding hydraulic parameters. The results from this study suggest that sediments in the fissured area act as preferred pathways in the shallow subsurface because surface runoff is concentrated in the fissures and because underlying fractures and cavities provide avenues for moisture and solute transport

Recent Advances in the Pharmacotherapy of Chronic Anal Fissure: An Update

Directory of Open Access Journals (Sweden)

Bikash Medhi

2008-07-01

Full Text Available Surgical sphincterotomy reduces anal tone and sphincter spasm and promotes ulcer healing. Because the surgery is associated with the side effect of faecal incontinence, pharmacological agents to treat chronic anal fissure have been explored recently. Glyceryl trinitrate (GTN ointment (0.2% has an efficacy of up to 68% in healing chronic anal fissure, but it is associated with headache as the major and most common side effect. Though botulinum toxin injected into the anal sphincter healed over 80% of chronic anal fis-sures, it is more invasive and expensive than GTN therapy. Diltiazem ointment achieved healing of chronic anal fissure comparable to 0.2% GTN ointment but was associated with fewer side effects. Other drugs that have been tried are lidocaine, the alpha-adrenergic antagonist indoramin, and the potassium channel opener minoxidil.

Atmospheric chemistry of HFE-7000 (CF(3)CF (2)CF (2)OCH (3)) and 2,2,3,3,4,4,4-heptafluoro-1-butanol (CF (3)CF (2)CF (2)CH (2)OH): kinetic rate coefficients and temperature dependence of reactions with chlorine atoms.

Science.gov (United States)

Díaz-de-Mera, Yolanda; Aranda, Alfonso; Bravo, Iván; Rodríguez, Diana; Rodríguez, Ana; Moreno, Elena

2008-10-01

The adverse environmental impacts of chlorinated hydrocarbons on the Earth's ozone layer have focused attention on the effort to replace these compounds by nonchlorinated substitutes with environmental acceptability. Hydrofluoroethers (HFEs) and fluorinated alcohols are currently being introduced in many applications for this purpose. Nevertheless, the presence of a great number of C-F bonds drives to atmospheric long-lived compounds with infrared absorption features. Thus, it is necessary to improve our knowledge about lifetimes and global warming potentials (GWP) for these compounds in order to get a complete evaluation of their environmental impact. Tropospheric degradation is expected to be initiated mainly by OH reactions in the gas phase. Nevertheless, Cl atoms reaction may also be important since rate constants are generally larger than those of OH. In the present work, we report the results obtained in the study of the reactions of Cl radicals with HFE-7000 (CF(3)CF(2)CF(2)OCH(3)) (1) and its isomer CF(3)CF(2)CF(2)CH(2)OH (2). Kinetic rate coefficients with Cl atoms have been measured using the discharge flow tube-mass spectrometric technique at 1 Torr of total pressure. The reactions of these chlorofluorocarbons (CFCs) substitutes have been studied under pseudo-first-order kinetic conditions in excess of the fluorinated compounds over Cl atoms. The temperature ranges were 266-333 and 298-353 K for reactions of HFE-7000 and CF(3)CF(2)CF(2)CH(2)OH, respectively. The measured room temperature rate constants were k(Cl+CF(3)CF(2)CF(2)OCH(3)) = (1.24 +/- 0.28) x 10(-13) cm(3) molecule(-1) s(-1)and k(Cl+CF(3)CF(2)CF(2)CH(2)OH) = (8.35 +/- 1.63) x 10(-13) cm(3) molecule(-1) s(-1) (errors are 2sigma + 10% to cover systematic errors). The Arrhenius expression for reaction 1 was k (1)(266-333 K) = (6.1 +/- 3.8) x 10(-13)exp[-(445 +/- 186)/T] cm(3) molecule(-1) s(-1) and k (2)(298-353 K) = (1.9 +/- 0.7) x 10(-12)exp[-(244 +/- 125)/T] cm(3) molecule(-1) s(-1) (errors

Penetration of fluoride-containing self-gelling liquids into human molar occlusal fissures in vitro.

Science.gov (United States)

Bottenberg, P; Slop, D; Coomans, D

1989-01-01

In this in vitro study the ability and speed of self-gelling liquid compositions to penetrate into fissures were evaluated. Two formulations containing either tetraethylsilicate, ammonium fluoride, and sodium lauryl sulfate or tetraethylsilicate, sodium fluoride, and cetylpyridinium chloride at different concentrations were used. It is shown that fissure penetration occurs when a certain minimum content of surface-active agent is present. Fissure penetration is achieved within 3-4 s, according to the fissure morphology.

PERBEDAAN TOPICAL FLUORIDE APPLICATION DAN FISSURE SEALANT DALAM MENCEGAH KARIES PADAGIGI MOLAR SATU

Directory of Open Access Journals (Sweden)

Pawarti Pawarti

2017-07-01

Full Text Available Abstract: Topical Fluoride Application And Fissure Sealant To Prevent Dental Caries Permanent First Molars. Anatomy pits and fissures of teeth are caries initiation vulnerable areas of the permanent molars that grow at the age of 6 years where children can not perform oral hygiene. Caries prevention can be done by closing the pits and fissures or application of fluoride (topical fluoride application on the surface of the teeth. The purpose of this study was to analyze the difference fissure sealants and topical application of fluoride to prevent dental caries of first permanent molars. This study was a quasi-experimental study with time series, a sample was taken by purposive 117-second grade students of SDN District of North Pontianak. Data were analyzed using t-test. The result showed that fissure sealant more effective in caries prevention of first permanent molar than topical fluoride application where there were none caries teeth after and month fissure sealant, 25% sealant partially off and 11% fully off. Teeth that have done fluoride after 6 months of 3.9% of dental caries, the eighth month of 5.4% of dental caries. There was a significant difference between the effectiveness of fissure sealants with topical application of fluoride to prevent dental caries in first permanent molars p-value < 0.05, after 6-month p-value: 0.004 and after 8-month p-value: 0.001. Abstrak: Topical Fluoride Application Dan Fissure Sealant Untuk Mencegah Karies Pada Gigi Molar Satu Permanen. Anatomi pit dan fisura gigi merupakan daerah rentan inisiasi karies gigi molar satu permanen yang tumbuh pada usia 6 tahun anak belum bisa melakukan kebersihan mulutnya. Pencegahan karies dapat dilakukan dengan cara menutup pit dan fissure atau pengolesan fluor (topical fluoride application pada permukaan gigi. Tujuan penelitian ini untuk menganalisis perbedaan efektivitas fissure sealant dan topical fluoride application untuk mencegah karies gigi molar satu permanen anak

Phreatic explosions during basaltic fissure eruptions: Kings Bowl lava field, Snake River Plain, USA

Science.gov (United States)

Hughes, Scott S.; Kobs Nawotniak, Shannon E.; Sears, Derek W. G.; Borg, Christian; Garry, William Brent; Christiansen, Eric H.; Haberle, Christopher W.; Lim, Darlene S. S.; Heldmann, Jennifer L.

2018-02-01

Physical and compositional measurements are made at the 7 km-long ( 2200 years B.P.) Kings Bowl basaltic fissure system and surrounding lava field in order to further understand the interaction of fissure-fed lavas with phreatic explosive events. These assessments are intended to elucidate the cause and potential for hazards associated with phreatic phases that occur during basaltic fissure eruptions. In the present paper we focus on a general understanding of the geological history of the site. We utilize geospatial analysis of lava surfaces, lithologic and geochemical signatures of lava flows and explosively ejected blocks, and surveys via ground observation and remote sensing. Lithologic and geochemical signatures readily distinguish between Kings Bowl and underlying pre-Kings Bowl lava flows, both of which comprise phreatic ejecta from the Kings Bowl fissure. These basalt types, as well as neighboring lava flows from the contemporaneous Wapi lava field and the older Inferno Chasm vent and outflow channel, fall compositionally within the framework of eastern Snake River Plain olivine tholeiites. Total volume of lava in the Kings Bowl field is estimated to be 0.0125 km3, compared to a previous estimate of 0.005 km3. The main (central) lava lake lost a total of 0.0018 km3 of magma by either drain-back into the fissure system or breakout flows from breached levees. Phreatic explosions along the Kings Bowl fissure system occurred after magma supply was cut off, leading to fissure evacuation, and were triggered by magma withdrawal. The fissure system produced multiple phreatic explosions and the main pit is accompanied by others that occur as subordinate pits and linear blast corridors along the fissure. The drop in magma supply and the concomitant influx of groundwater were necessary processes that led to the formation of Kings Bowl and other pits along the fissure. A conceptual model is presented that has relevance to the broader range of low-volume, monogenetic

[Application of individually designed trans-fissure approach in brain surgery: analysis of 90 cases].

Science.gov (United States)

Zhao, Ji-Zong; Wang, Shuo; Zhang, Mao-Zhi; Wang, Lei; Wang, Rong; Tang, Ya-Juan

2009-01-06

To explore the feasibility and value of trans-fissure approaches in brain surgery through individually designed craniotomy. Ninety patients with intracranial space-occupying lesions, 47 males and 58 females, aged (43 +/- 14) (1 - 68), were treated by individualized trans-fissure approach surgeries. Linear scalp incision or "horseshoe shape" scalp incision were designed to perform the operation, with a bone flap 3 - 4 cm in diameter. The shortest approach to reach the lesion was decided under the guidance of neuro-navigation and real-time B-mode ultrasonography. Then the lesions were removed through natural cortical fissures. Another 79 patients with intracranial space-occupying lesions, 53 males and 51 females, aged (42 +/- 11) (15 -73), undergoing classical surgeries in the same period were used as control group. The average operation time, size of bone flap, amount of blood loss, hospitalization time, and hospitalization cost were compared between these 2 groups. The operation time of the individually designed trans-fissure approach group was (3.1 +/- 1.6) hours (1.33 - 10.83 hours), significantly shorter than that of the control group [(4.8 +/- 1.9) hrs, P trans-fissure approach group was (173 +/- 168) ml (20 m - 500 ml), significantly less than that of the control group [(410 +/- 61) ml, P trans-fissure approach group was (12 +/- 5) cm2 [(1 - 25) cm2], significantly smaller than that of the control group [(20. +/- 9) cm2, P trans-fissure approach group received retransfusion, compared to 15 in the control group, during operation. No infection or other significant complications occurred after operation in the individually designed trans-fissure approach group. The hospitalization time of the individually designed trans-fissure approach group was (20 +/- 6) days (9 - 39 days), significantly shorter than that of the control group [(24 +/- 7) days, P trans-fissure approach group was (23171 +/- 7280) yuan RMB; significantly lower than that of the control group

Two-quasineutron states in 98248Cf and 98250Cf and the neutron-neutron residual interactions

International Nuclear Information System (INIS)

Katori, K.; Ahmad, I.; Friedman, A. M.

2008-01-01

Two-quasineutron states in 248 Cf and 250 Cf were investigated by single-neutron transfer reactions, 249 Cf(d,t) 248 Cf and 249 Cf(d,p) 250 Cf. The majority of levels observed were assigned to 12 bands in 248 Cf and six bands in 250 Cf, constructed from the single-particle states in neighboring Cf nuclei. The effective two-body interactions between two odd neutrons coupled outside a deformed core were deduced from the differences in the energies of the bandheads formed by the parallel and antiparallel coupling of the intrinsic spins of the two single-particle states

Atmospheric chemistry of (CF3)2CHOCH3, (CF3)2CHOCHO, and CF3C(O)OCH3

DEFF Research Database (Denmark)

Østerstrøm, Freja From; Wallington, Timothy J.; Andersen, Mads Peter Sulbæk

2015-01-01

Smog chambers with in situ FTIR detection were used to measure rate coefficients in 700 Torr of air and 296 ± 2 K of: k(Cl+(CF3)2CHOCH3) = (5.41 ± 1.63) × 10(-12), k(Cl+(CF3)2CHOCHO) = (9.44 ± 1.81) × 10(-15), k(Cl+CF3C(O)OCH3) = (6.28 ± 0.98) × 10(-14), k(OH+(CF3)2CHOCH3) = (1.86 ± 0.41) × 10(-1...

Demonstration of the pulmonary interlobar fissures on multiplanar reformatted images with 64-slices spiral CT

International Nuclear Information System (INIS)

Wang Yafei; Chen Yerong; Shan Xiuhong; Tang Zhiyang; Ni Enzhen; Huang Hao; Wu Shuchun

2009-01-01

Objective: To determine the optimal orientation and slice thickness of reformatted images to visualize the interlobar fissures on multiplanar reformation (MPR) images and to recommend MPR imaging protocal for visualizing interlobar fissures in clinical practise. Methods: 64-slices CT scans of chest were obtained in 300 patients without pulmonary diseases. Axial, sagittal and coronal images were reformatted at 1, 2, 3, 7 mm slice thickness respectively from the raw volume data. Three experienced radiologists evaluated all of the MPR images in the lung window and compared the differences in visualization of the interlohar fissures among the three reformatted orientations and at the different slice thicknesses with Fisher test and Friedman test. Results: Fissures on sagittal MPR images using 1, 2, 3, and 7 mm reformatted slice thickness appeared as a fine line and the preference value analysis showed the MPR images with a 3 mm reformatted slice thickness is the best for visualizing the interlobar fissure. Compared to the sagittal orientation, the coronal was not as good and the axial was the worst among the three orientations. The coronal images with a 3 mm reformatted slice thickness were slightly inferior to sagittal images. The right horizontal fissures were observed as a fine line in all coronal image in 94.0% (282)of cases and in some of the images in 6.0% (18) of cases, the right oblique fissures were displayed as a fine line in coronal images in 2.3% (7) of cases and in some images in 85.0% (255) of cases, the left oblique fissures were displayed as a fine line in some coronal images in 35.7% (107) of cases and displayed as a coarse line in 64.3% (193) of cases. On axial MPR images using 3 mm reformation slice thickness, the right oblique fissures and the left oblique fissures were displayed as a fine line in some axial images in 79.3% (238) and 81.0% (243) of cases respectively, none of the images showed horizontal fissures as a fine line. There was

Hemorrhoids and anal fissures in inflammatory bowel disease.

Science.gov (United States)

D'Ugo, S; Stasi, E; Gaspari, A L; Sileri, P

2015-12-01

Perianal disease is a common complication of inflammatory bowel disease (IBD). It includes different conditions from more severe and potentially disabling ones, such as abscesses and fistulas, to more benign conditions such as hemorrhoids, skin tags and fissures. Most literature has been focused on anal sepsis and fistulae, as they carry the majority of disease burden and often alter the natural course of the disease. Hemorrhoids and anal fissures in patients with IBD have been overlooked, although they can represent a challenging problem. The management of hemorrhoids and fissures in IBD patients may be difficult and may significantly differ compared to the non-affected population. Historically surgery was firmly obstructed, and hemorrhoidectomy or sphincterotomy in patients with associated diagnosis of IBD was considered harmful, although literature data is scant and based on small series. Various authors reported an incidence of postoperative complications higher in IBD than in the general populations, with potential severe events. Considering that a spontaneous healing is possible, the first line management should be a medical therapy. In patients non-responding to conservative measures it is possible a judicious choice of surgical options on a highly selective basis; this can lead to acceptable results, but the risk of possible complications needs to be considered. In this review it is analyzed the current literature on the incidence, symptoms and treatment options of hemorrhoids and anal fissures in patients with Crohn's disease and ulcerative colitis.

New diagnostic technology and hidden pits and fissures caries

OpenAIRE

Fabrizio Guerra; Marta Mazur; Francesca Rinaldo; Denise Corridore; Daniele Salvi; Debora Pasqualotto; Gianna Maria Nardi; Livia Ottolenghi

2015-01-01

The accuracy in pits and fissures caries detection is of paramount importance in dental caries primary and secondary prevention. A combination of visual examination and probing is currently the mainstay of occlusal caries diagnosis. Unfortunately, these types of inspection alone may leave a certain number of pit and fissure caries undetected. The Vista Cam iX fluorescence camera (Durr Dental, Bietigheim-Bissingen, Germany) is a novel dental diagnostic tool for quantitative assessment of denta...

Orientation of the eruption fissures controlled by a shallow magma chamber in Miyakejima

Directory of Open Access Journals (Sweden)

Nobuo Geshi

2016-11-01

Full Text Available Orientation of the eruption fissures and composition of the lavas of the Miyakejima volcano indicate tectonic influence of a shallow magma chamber on the distribution of eruption fissures. We examined the distributions and magmatic compositions of 23 fissures that formed within the last 2800 years, based on a field survey and a new dataset of 14C ages. The dominant orientation of the eruption fissures in the central portion of the volcano was found to be NE-SW, which is perpendicular to the direction of regional maximum horizontal compressive stress (σHmax. Magmas that show evidences of magma mixing between basaltic and andesitic magmas erupted mainly from the eruption fissures with a higher offset angle from the regional σHmax direction. The presence of a shallow dike-shaped magma chamber controls the distribution of the eruption fissures. The injection of basaltic magma into the shallow andesitic magma chamber caused the temporal rise of internal magmatic pressure in the shallow magma chamber. Dikes extending from the andesitic magma chamber intrude along the local compressive stress field which is generated by the internal excess pressure of the andesitic magma chamber. As the result, the eruption fissures trend parallel to the elongation direction of the shallow magma chamber. Injection of basaltic magma into the shallow andesitic magma chamber caused the magma mixing. Some basaltic dikes from the deep-seated magma chamber reach the ground surface without intersection with the andesitic magma chamber. The patterns of the eruption fissures can be modified in the future as was observed in the case of the destruction of the shallow magma chamber during the 2000 AD eruption.

Fissure formation in coke. 2: Effect of heating rate, shrinkage and coke strength

Energy Technology Data Exchange (ETDEWEB)

D.R. Jenkins; M.R. Mahoney [CSIRO, North Ryde, NSW (Australia). Mathematical and Information Sciences

2010-07-15

We investigate the effects of the heating rate, coke shrinkage and coke breakage strength upon the fissure pattern developed in a coke oven charge during carbonisation. This is done principally using a mechanistic model of the formation of fissures, which considers them to be an array of equally spaced fissures, whose depth follows a 'period doubling' pattern based upon the time history of the fissures. The model results are compared with pilot scale coke oven experiments. The results show that the effect of heating rate on the fissure pattern is different to the effect of coke shrinkage, while the effect of coke breakage strength on the pattern is less pronounced. The results can be seen in both the shape and size of resulting coke lumps after stabilisation. The approach gives the opportunity to consider means of controlling the carbonisation process in order to tune the size of the coke lumps produced. 7 refs., 18 figs., 4 tabs.

Differential compaction mechanism for earth fissures near Casa Grande, Arizona.

Science.gov (United States)

Jachens, R.C.; Holzer, T.L.

1982-01-01

Precise gravity measurements indicate that earth fissures or tension cracks caused by ground-water withdrawal within a 10km2 area SE of Casa Grande are associated with relief on the buried interface between the alluvial aquifer and underlying bedrock. These relations suggest that the fissures are forming in response to localized differential compaction caused by localized variations of aquifer-system thickness. -from Authors

Søvind Marl - Behaviour of a plastic fissured Eocene clay

DEFF Research Database (Denmark)

Grønbech, Gitte Lyng

The thesis regards the characterisation and determination of properties of Søvind Marl, a Danish highly fissured and plastic clay. Highly fissured, plastic clays are present at great depths several places in Denmark, where extensive development activity is currently ongoing. Nonetheless...... will determine the correlation factors from field tests to undrained shear strength. Finally, the thesis is concluded with recommendations for further work within the field of plastic clays....

Numerical simulation of earth fissures caused by overly aquifer exploitation at Guangming Village, China

Science.gov (United States)

Ye, S.; Franceschini, A.; Zhang, Y.; Janna, C.; Gong, X.; Yu, J.; Teatini, P.

2017-12-01

Earth fissures accompanying anthropogenic land subsidence due to overly aquifer exploitation create significant geohazards in China. In the framework of an efficient and safe management of groundwater, numerical models represent a unique scientific approach to predict the generation and development of earth fissures. However, the common geomechanical simulators fail to reproduce fissure development because, due to compatibility conditions, they cannot be effectively applied in discontinuous mechanics. We present an innovative modelling approach for the simulation of fissure development. Firstly, a regional 3D groundwater model is calibrated on available piezometric records; secondly, the regional outcome is used to define the boundary conditions of a local 3D groundwater model developed at the fissure scale and implementing a refined discretization of the local hydrogeologic setting; finally, the pressure change are used as forcing factor in a local 3D geomechanical model, which combines Finite Elements and Interface Elements to simulate the deformation of the continuous aquifer system and the generation and sliding/opening of earth fissures The approach has been applied to simulate the earth fissure at Guangming Village in Wuxi, China with land subsidence of more than 1 m caused by the overexploitation of the second confined aquifer. The first earth fissure was observed in 1998. It developed fast from 1998 to 2007. The domain addressed by the local simulations is 2 km wide and 5 km long. The thickness of the aquifer system ranges from 0 m, in the proximity of a mountain ridge southward, to 210 m northward and includes a phreatic aquifer, the first and second confined aquifers, and four aquitards. The simulations spanned the period from 1980, i.e. before the inception of large groundwater withdrawals, to 2015. The modelling results highlight that the earth fissures at Guangming Village have been caused by tension and shear, which developed from the land surface

CF and School

Science.gov (United States)

... Accommodations for College Scholarships and Financial Aid 10 Things I Wish I Knew Before Coming to College CF and College: The Secret to Getting it All Done View All Managing My CF in College Resources ...

Incomplete fissures in severe emphysematous patients evaluated with MDCT: Incidence and interobserver agreement among radiologists and pneumologists

Energy Technology Data Exchange (ETDEWEB)

Koenigkam-Santos, Marcel, E-mail: marcelk46@yahoo.com.br [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Neuenheimer Feld 110, 69120 Heidelberg (Germany); Chest Clinic (Thoraxklinik), University of Heidelberg, Amalienstr. 5,69126 Heidelberg (Germany); Department of Radiology, University Hospital of the School of Medicine of Ribeirao Preto - University of Sao Paulo, Av. Bandeirantes 3900, Campus Universitario Monte Alegre, 14048 900 Ribeirao Preto, SP (Brazil); Puderbach, Michael [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Neuenheimer Feld 110, 69120 Heidelberg (Germany); Chest Clinic (Thoraxklinik), University of Heidelberg, Amalienstr. 5,69126 Heidelberg (Germany); Gompelmann, Daniela; Eberhardt, Ralf; Herth, Felix [Chest Clinic (Thoraxklinik), University of Heidelberg, Amalienstr. 5,69126 Heidelberg (Germany); Kauczor, Hans-Ulrich [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Neuenheimer Feld 110, 69120 Heidelberg (Germany); Heussel, Claus Peter [Department of Diagnostic and Interventional Radiology, University of Heidelberg, Neuenheimer Feld 110, 69120 Heidelberg (Germany); Chest Clinic (Thoraxklinik), University of Heidelberg, Amalienstr. 5,69126 Heidelberg (Germany)

2012-12-15

Objective: Pulmonary fissures completeness predicts efficacy in endobronchial valves (EBV) implantation, a new lobar volume reduction therapy for severe emphysematous patients. We assessed the incidence of incomplete fissures and the interobserver agreement in its evaluation with MDCT, in severe emphysematous patients prior to EBV implantation. Materials and Methods: Volumetric thin-section CT scans of 35 patients (CODP GOLD 3/4, heterogeneous emphysema) were retrospectively reviewed by 2 pneumologists, 1 general and 2 experienced chest radiologists, independently and blinded for treatment outcome, and the pulmonary fissures were classified as either complete or incomplete. Interobserver agreement was assessed with Kappa index (KI). Results: Agreement between all readers for the left oblique, right oblique and horizontal fissure was, respectively, moderate (KI = 0.53), fair (KI = 0.37) and moderate (KI = 0.42). Highest agreement (99/105 fissures) was observed among experienced radiologists, being for left oblique, right oblique and horizontal, respectively, almost perfect (KI = 0.79), perfect (KI = 1.0) and moderate (KI = 0.52). These 2 reviewers found that all of 35 patients had at least one incomplete fissure, with a proportion of incomplete fissures assigned as 74/65%, 85/85% and 91/88%, respectively for the left oblique, right oblique and horizontal fissures. Conclusions: Pneumologists and radiologists agreed fairly to moderately in fissures analysis, while the experienced chest radiologists reached the highest clinically adequate agreement of 94%. We believe that clinical routine visual analysis of the fissures integrity can be done with a good degree of confidence in MDCT images, and experienced readers might be required. Also, a higher than expected incidence of incomplete fissures was described in our studied population.

Incomplete fissures in severe emphysematous patients evaluated with MDCT: Incidence and interobserver agreement among radiologists and pneumologists

International Nuclear Information System (INIS)

Koenigkam-Santos, Marcel; Puderbach, Michael; Gompelmann, Daniela; Eberhardt, Ralf; Herth, Felix; Kauczor, Hans-Ulrich; Heussel, Claus Peter

2012-01-01

Objective: Pulmonary fissures completeness predicts efficacy in endobronchial valves (EBV) implantation, a new lobar volume reduction therapy for severe emphysematous patients. We assessed the incidence of incomplete fissures and the interobserver agreement in its evaluation with MDCT, in severe emphysematous patients prior to EBV implantation. Materials and Methods: Volumetric thin-section CT scans of 35 patients (CODP GOLD 3/4, heterogeneous emphysema) were retrospectively reviewed by 2 pneumologists, 1 general and 2 experienced chest radiologists, independently and blinded for treatment outcome, and the pulmonary fissures were classified as either complete or incomplete. Interobserver agreement was assessed with Kappa index (KI). Results: Agreement between all readers for the left oblique, right oblique and horizontal fissure was, respectively, moderate (KI = 0.53), fair (KI = 0.37) and moderate (KI = 0.42). Highest agreement (99/105 fissures) was observed among experienced radiologists, being for left oblique, right oblique and horizontal, respectively, almost perfect (KI = 0.79), perfect (KI = 1.0) and moderate (KI = 0.52). These 2 reviewers found that all of 35 patients had at least one incomplete fissure, with a proportion of incomplete fissures assigned as 74/65%, 85/85% and 91/88%, respectively for the left oblique, right oblique and horizontal fissures. Conclusions: Pneumologists and radiologists agreed fairly to moderately in fissures analysis, while the experienced chest radiologists reached the highest clinically adequate agreement of 94%. We believe that clinical routine visual analysis of the fissures integrity can be done with a good degree of confidence in MDCT images, and experienced readers might be required. Also, a higher than expected incidence of incomplete fissures was described in our studied population.

Photoionisation study of Xe.CF{sub 4} and Kr.CF{sub 4} van-der-Waals molecules

Energy Technology Data Exchange (ETDEWEB)

Alekseev, V. A., E-mail: alekseev@va3474.spb.edu; Kevorkyants, R. [St. Petersburg State University, 7/9 Universitetskaya Nab., St. Petersburg 199034 (Russian Federation); Garcia, G. A.; Nahon, L. [Synchrotron Soleil, Orme des Merisiers, St. Aubin BP 48, 91192 Gif sur Yvette Cedex (France)

2016-05-14

We report on photoionization studies of Xe.CF{sub 4} and Kr.CF{sub 4} van-der-Waals complexes produced in a supersonic expansion and detected using synchrotron radiation and photoelectron-photoion coincidence techniques. The ionization potential of CF{sub 4} is larger than those of the Xe and Kr atoms and the ground state of the Rg.CF{sub 4}{sup +} ion correlates with Rg{sup +} ({sup 2}P{sub 3/2}) + CF{sub 4}. The onset of the Rg.CF{sub 4}{sup +} signals was found to be only ∼0.2 eV below the Rg ionization potential. In agreement with experiment, complementary ab initio calculations show that vertical transitions originating from the potential minimum of the ground state of Rg.CF{sub 4} terminate at a part of the potential energy surfaces of Rg.CF{sub 4}{sup +}, which are approximately 0.05 eV below the Rg{sup +} ({sup 2}P{sub 3/2}) + CF{sub 4} dissociation limit. In contrast to the neutral complexes, which are most stable in the face geometry, for the Rg.CF{sub 4}{sup +} ions, the calculations show that the minimum of the potential energy surface is in the vertex geometry. Experiments which have been performed only with Xe.CF{sub 4} revealed no Xe.CF{sub 4}{sup +} signal above the first ionization threshold of Xe, suggesting that the Rg.CF{sub 4}{sup +} ions are not stable above the first dissociation limit.

Calcul statistique du volume des blocs matriciels d'un gisement fissuré The Statistical Computing of Matrix Block Volume in a Fissured Reservoir

Directory of Open Access Journals (Sweden)

Guez F.

2006-11-01

Full Text Available La recherche des conditions optimales d'exploitation d'un gisement fissuré repose sur une bonne description de la fissuration. En conséquence il est nécessaire de définir les dimensions et volumes des blocs matriciels en chaque point d'une structure. Or la géométrie du milieu (juxtaposition et formes des blocs est généralement trop complexe pour se prêter au calcul. Aussi, dans une précédente communication, avons-nous dû tourner cette difficulté par un raisonnement sur des moyennes (pendages, azimuts, espacement des fissures qui nous a conduits à un ordre de grandeur des volumes. Cependant un volume moyen ne peut pas rendre compte d'une loi de répartition des volumes des blocs. Or c'est cette répartition qui conditionne le choix d'une ou plusieurs méthodes successives de récupération. Aussi présentons-nous ici une méthode originale de calcul statistique de la loi de distribution des volumes des blocs matriciels, applicable en tout point d'un gisement. La part de gisement concernée par les blocs de volume donné en est déduite. La connaissance générale du phénomène de la fracturation sert de base au modèle. Les observations de subsurface sur la fracturation du gisement en fournissent les données (histogramme d'orientation et d'espacement des fissures.Une application au gisement d'Eschau (Alsace, France est rapportée ici pour illustrer la méthode. The search for optimum production conditions for a fissured reservoir depends on having a good description of the fissure pattern. Hence the sizes and volumes of the matrix blocks must be defined at all points in a structure. However, the geometry of the medium (juxtaposition and shapes of blocks in usually too complex for such computation. This is why, in a previous paper, we got around this problem by reasoning on the bases of averages (clips, azimuths, fissure spacing, and thot led us to an order of magnitude of the volumes. Yet a mean volume cannot be used to explain

Fissure fillings from the Klipperaas study site

International Nuclear Information System (INIS)

Tullborg, E.L.

1986-07-01

The Klipperaas study site is located within the Smaaland-Vaermland granitoid belt in southern Sweden. The area investigated can be subdivided into blocks with different hydraulic character and fracture frequency of the rocks. A fissure filling, study has been carried out within the area. This includes identification of the minerals, mineral frequency, textures within the fissures and isotope analyses of calcites. Four generation of fissure fillings, within the time space c. 1600 M.a. to present, has been distinguished. These are 1) quartz; 2) epidote + muscovite and adularia + hematite; 3) calcite + chlorite +/hematite; 4) calcite, clay minerals and Fe-oxyhydroxide. It is observed that the surface water affect the uppermost part of the bedrock resulting in calcite dissolution, break down of pyrite and precipitation of Fe-oxyhydroxide. It is also obvious from the fracture calcite frequency that calcite dissolution is more intensive close to and within the fracture zones. There, Fe-oxyhydroxide can be found down to at least 400 m depth. This gives valuable information about the physic-chemical character of the groundwater within the bedrock. Several fracture zones have been reactivated. It is also suspected that relatively late movements have taken place causing crushing of the rock and only a slight cementation of the crushed material is visible. Some of the fracture zones correspond to mafic dikes. These zones exhibit lower hydraulic conductivity than other zones due to fracture sealing by clay minerals but also by chlorite and calcite. (author)

Atmospheric chemistry of cyc-CF2CF2CF2CH=CH-: Kinetics, products, and mechanism of gas-phase reaction with OH radicals, and atmospheric implications

Science.gov (United States)

Guo, Qin; Zhang, Ni; Uchimaru, Tadafumi; Chen, Liang; Quan, Hengdao; Mizukado, Junji

2018-04-01

The rate constants for the gas-phase reactions of cyc-CF2CF2CF2CH=CH- with OH radicals were determined by a relative rate method between 253 and 328 K. The rate constant k1 at 298 K was measured to be (1.08 ± 0.04) × 10-13 cm3 molecule-1 s-1, and the Arrhenius expression was k1 = (3.72 ± 0.14) × 10-13 exp [(-370 ± 12)/T]. The atmospheric lifetime of cyc-CF2CF2CF2CH=CH- was calculated to be 107 d. The products and mechanism for the reaction of cyc-CF2CF2CF2CH=CH- with OH radicals were also investigated. CO, CO2, and COF2 were identified as the main carbon-containing products following the OH-initiated reaction. Moreover, the radiative efficiency (RE) was determined to be 0.143 W m-2 ppb-1, and the global warming potentials (GWPs) for 20, 100, and 500 yr were 54, 15, and 4, respectively. The photochemical ozone creation potential of the title compound was estimated to be 1.3.

Cutting Whole Length or Partial Length of Internal Anal Sphincter in Managementof Fissure in Ano

Directory of Open Access Journals (Sweden)

Furat Shani Aoda

2017-12-01

Full Text Available A chronic anal fissure is a common painful perianal condition.The main operative procedure to treat this painful condition is a lateral internal sphincteretomy (LIS.The aim of study is to compare the outcome and complications of closed LIS up to the dentate line (whole length of internal sphincter or up to the fissure apex (partial length of internal sphincter in the treatment of anal fissure.It is a prospective comparativestudy including 100 patients with chronic fissure in ano. All patients assigned to undergo closed LIS. Those patients were randomly divided into two groups: 50 patients underwent LIS to the level of dentate line (whole length and other 50 patients underwent LIS to the level of fissure apex (partial length. Patients were followed up weekly in the 1st month, twice monthly in the second month then monthly   for next 2 months and finally after 1 year. There was satisfactory relief of pain in all patients in both groups & complete healing of the fissure occurred. Regarding post operative incontinence no major degree of incontinence occur in both group but minor degree of incontinence persists In 7 patients after whole length LIS after one year. In conclusion, both whole length & partial length LIS associated with improvement of pain, good chance of healing but whole length LIS associated with more chance of long term  flatus incontinence. Hence,we recommend partial length LIS as treatment forchronic anal fissure.

Reactivation of the chloroplast CF1-ATPase beta subunit by trace amounts of the CF1 alpha subunit suggests a chaperonin-like activity for CF1 alpha.

Science.gov (United States)

Avni, A; Avital, S; Gromet-Elhanan, Z

1991-04-25

Incubation of tobacco and lettuce thylakoids with 2 M LiCl in the presence of MgATP removes the beta subunit from their CF1-ATPase (CF1 beta) together with varying amounts of the CF1 alpha subunit (CF1 alpha). These 2 M LiCl extracts, as with the one obtained from spinach thylakoids (Avital, S., and Gromet-Elhanan, Z. (1991) J. Biol. Chem. 266, 7067-7072), could form active hybrid ATPases when reconstituted into inactive beta-less Rhodospirillum rubrum chromatophores. Pure CF1 beta fractions that have been isolated from these extracts could not form such active hybrids by themselves, but could do so when supplemented with trace amounts (less than 5%) of CF1 alpha. A mitochondrial F1-ATPase alpha subunit was recently reported to be a heat-shock protein, having two amino acid sequences that show a highly conserved identity with sequences found in molecular chaperones (Luis, A. M., Alconada, A., and Cuezva, J. M. (1990) J. Biol. Chem. 265, 7713-7716). These sequences are also conserved in CF1 alpha isolated from various plants, but not in F1 beta subunits. The above described reactivation of CF1 beta by trace amounts of CF1 alpha could thus be due to a chaperonin-like function of CF1 alpha, which involves the correct, active folding of isolated pure CF1 beta.

Methods for monitoring land subsidence and earth fissures in the Western USA

Directory of Open Access Journals (Sweden)

K. C. Fergason

2015-11-01

Full Text Available Depletion of groundwater resources in many deep alluvial basin aquifers in the Western USA is causing land subsidence, as it does in many regions worldwide. Land subsidence can severely and adversely impact infrastructure by changing the ground elevation, ground slope (grade and through the development of ground cracks known as earth fissures that can erode into large gullies. Earth fissures have the potential to compromise the foundations of dams, levees, and other infrastructure and cause failure. Subsequent to an evaluation of the overall subsidence experienced in the vicinity of subsidence-impacted infrastructure, a detailed investigation to search for earth fissures, and design and/or mitigation of potentially effected infrastructure, a focused monitoring system should be designed and implemented. Its purpose is to provide data, and ultimately knowledge, to reduce the potential adverse impacts of land subsidence and earth fissure development to the pertinent infrastructure. This risk reduction is realized by quantifying the rate and distribution of ground deformation, and to detect ground rupture if it occurs, in the vicinity of the infrastructure. The authors have successfully designed and implemented monitoring systems capable of quantifying rates and distributions of ground subsidence and detection of ground rupture at multiple locations throughout the Western USA for several types of infrastructure including dams, levees, channels, basins, roadways, and mining facilities. Effective subsidence and earth fissure monitoring requires understanding and quantification of historic subsidence, estimation of potential future subsidence, delineation of the risk for earth fissures that could impact infrastructure, and motivation and resources to continue monitoring through time. A successful monitoring system provides the means to measure ground deformation, grade changes, displacement, and anticipate and assess the potential for earth fissuring

Abnormalities of cerebellar foliation and fissuration: classification, neurogenetics and clinicoradiological correlations

Energy Technology Data Exchange (ETDEWEB)

Demaerel, P. [University Hospital, Department of Radiology, Herestraat 49, 3000 Leuven (Belgium)

2002-08-01

Several genes have been found to influence the different cells involved in the processes of foliation and fissuration in the mouse and rat cerebellum. In the light of these new concepts and on the basis of the imaging findings in 42 patients, a classification is proposed for abnormalities of foliation and fissuration. On the basis of recent genetic and experimental evidence on mechanisms which control the origin of the cerebellum, it is suggested that abnormalities of foliation and fissuration form a single group, with a spectrum of severity. Some patients have only abnormal fissuration of the anterior lobe (type 1a) and others additional dysplasia of the anterior and part of the posterior lobe (type 1b). Extension of abnormalities into the hemispheres is often seen in the latter group. A second group has vermian and hemisphere abnormalities (type 2). In addition to the malformation of the anterior lobe of the vermis, three different hemispheric lesions can be seen in this group: cortical dysgenesis, hypertrophy of the cerebellar cortex, and malorientation of the folia. The mild abnormalities (type 1a) can be considered an incidental observation without clinical relevance. The moderate and severe cerebellar anomalies (type 1b and 2) are always associated with cerebellar symptoms and/or signs. (orig.)

Abnormalities of cerebellar foliation and fissuration: classification, neurogenetics and clinicoradiological correlations

International Nuclear Information System (INIS)

Demaerel, P.

2002-01-01

Several genes have been found to influence the different cells involved in the processes of foliation and fissuration in the mouse and rat cerebellum. In the light of these new concepts and on the basis of the imaging findings in 42 patients, a classification is proposed for abnormalities of foliation and fissuration. On the basis of recent genetic and experimental evidence on mechanisms which control the origin of the cerebellum, it is suggested that abnormalities of foliation and fissuration form a single group, with a spectrum of severity. Some patients have only abnormal fissuration of the anterior lobe (type 1a) and others additional dysplasia of the anterior and part of the posterior lobe (type 1b). Extension of abnormalities into the hemispheres is often seen in the latter group. A second group has vermian and hemisphere abnormalities (type 2). In addition to the malformation of the anterior lobe of the vermis, three different hemispheric lesions can be seen in this group: cortical dysgenesis, hypertrophy of the cerebellar cortex, and malorientation of the folia. The mild abnormalities (type 1a) can be considered an incidental observation without clinical relevance. The moderate and severe cerebellar anomalies (type 1b and 2) are always associated with cerebellar symptoms and/or signs. (orig.)

Retention of fissure sealants in young permanent molars affected by dental fluorosis: a 12-month clinical study.

Science.gov (United States)

Hasanuddin, S; Reddy, E R; Manjula, M; Srilaxmi, N; Rani, S T; Rajesh, A

2014-10-01

To evaluate and compare retention and caries occurance following placement of Clinpro and FUJI VII fissure sealants, by two different techniques simultaneously in unsealed, contralateral young permanent molars of 7- to 10-year-old children affected by mild to moderate dental fluorosis at various recall intervals of 1 week, 1, 3, 6 and 12 months. 80 schoolchildren with mild to moderate dental fluorosis were assigned to Group A and Group B with 40 children in each group. In Group A Clinpro fissure sealant and in Group B Fuji VII fissure sealant was used. In both the groups fissure sealants were applied by conventional fissure sealant technique (CST) on one side and enameloplasty sealant technique (EST) on the other side of the same arch. The applied fissure sealants were evaluated clinically for retention and caries incidence. Clinpro fissure sealant showed a retention rate of 95% when compared with Fuji VII (57.5%) at the end of 12 months, which was statistically significant. Regarding techniques, EST showed better results than CST in both the groups. Comparison of groups with respect to retention and techniques at different time periods was performed using Mann-Whitney U test (p < 0.05). Comparison of different time periods with respect to retention and technique in all the groups was performed using Wilcoxon matched pairs test by ranks (p < 0.05). Clinpro fissure sealant showed better retention at all treatment intervals, when compared with Fuji VII. Further follow-up is required to study the efficacy of the fissure sealant placement techniques.

Enhancement of discharge performance of Li/CF x cell by thermal treatment of CF x cathode material

Science.gov (United States)

Zhang, Sheng S.; Foster, Donald; Read, Jeffrey

In this work we demonstrate that the thermal treatment of CF x cathode material just below the decomposition temperature can enhance discharge performance of Li/CF x cells. The performance enhancement becomes more effective when heating a mixture of CF x and citric acid (CA) since CA serves as an extra carbon source. Discharge experiments show that the thermal treatment not only reduces initial voltage delay, but also raises discharge voltage. Whereas the measurement of powder impedance indicates the thermal treatment does not increase electronic conductivity of CF x material. Based on these facts, we propose that the thermal treatment results in a limited decomposition of CF x, which yields a subfluorinated carbon (CF x- δ), instead of a highly conductive carbon. In the case of CF x/AC mixture, the AC provides extra carbon that reacts with F 2 and fluorocarbon radicals generated by the thermal decomposition of CF x to form subfluorinated carbon. The process of thermal treatment is studied by thermogravimetric analysis and X-ray diffraction, and the effect of treatment conditions such as heating temperature, heating time and CF x/CA ratio on the discharge performance of CF x cathode is discussed. As an example, a Li/CF x cell using CF x treated with CA at 500 °C under nitrogen for 2 h achieved theretical specific capacity when being discharged at C/5. Impedance analysis indicates that the enhanced performance is attributed to a significant reduction in the cell reaction resistance.

Kinetics and mechanisms of reactions of CF, CHF, and CF2 radicals

International Nuclear Information System (INIS)

Hsu, D.S.Y.; Umstead, M.E.; Lin, M.C.

1978-01-01

This chapter reviews briefly methods for the production of CF, CHF and CF 2 , and inmore detail, the reactions of these interesting and important radicals. Although a considerable, but not extensive, amount of work has been done on the reactions of CF 2 , little of the chemistry of CF and CHF is known. This chapter also includes the preliminary results of some experiments carried out in this Laboratory on the dynamics of some of the reactions involving these radicals. These results were largely arrived at through investigations of the degree of vibrational excitation of the HF and CO reaction products, determined by HF and CO laser emission and CO laser resonance absorption measurements. The coverage of this review is restricted to the gas phase chemistry of these radicals, and does not include their addition reactions to olefins

Traumatic superior orbital fissure syndrome: assessment of cranial nerve recovery in 33 cases.

Science.gov (United States)

Chen, Chien-Tzung; Wang, Theresa Y; Tsay, Pei-Kwei; Huang, Faye; Lai, Jui-Pin; Chen, Yu-Ray

2010-07-01

Superior orbital fissure syndrome is a rare complication that occurs in association with craniofacial trauma. The characteristics of superior orbital fissure syndrome are attributable to a constellation of cranial nerve III, IV, and VI palsies. This is the largest series describing traumatic superior orbital fissure syndrome that assesses the recovery of individual cranial nerve function after treatment. In a review from 1988 to 2002, 33 patients with superior orbital fissure syndrome were identified from 11,284 patients (0.3 percent) with skull and facial fractures. Severity of cranial nerve injury and functional recovery were evaluated by extraocular muscle movement. Patients were evaluated on average 6 days after initial injury, and average follow-up was 11.8 months. There were 23 male patients. The average age was 31 years. The major mechanism of injury was motorcycle accident (67 percent). Twenty-two received conservative treatment, five were treated with steroids, and six patients underwent surgical decompression of the superior orbital fissure. After initial injury, cranial nerve VI suffered the most damage, whereas cranial nerve IV sustained the least. In the first 3 months, recovery was greatest in cranial nerve VI. At 9 months, function was lowest in cranial nerve VI and highest in cranial nerve IV. Eight patients (24 percent) had complete recovery of all cranial nerves. Functional recovery of all cranial nerves reached a plateau at 6 months after trauma. Cranial nerve IV suffered the least injury, whereas cranial nerve VI experienced the most neurologic deficits. Cranial nerve palsies improved to their final recovery endpoints by 6 months. Surgical decompression is considered when there is evidence of bony compression of the superior orbital fissure.

The effect of fissures on the strength of structural timber

Directory of Open Access Journals (Sweden)

Íñiguez, Guillermo

2010-06-01

Full Text Available Detailed measurements of drying fissures were carried out on 28 pieces of gross cross-section structural Scots pine timber. Different parameters have been proposed to measure their magnitude: length, depth, thickness and slope of grain, as well as an index of area in the neutral axis plane (ratio of effective to total surface. The parameters of fissures have been related to bending strength, shear strength, modulus of elasticity and rupture energy obtained from mechanical tests, considering whether rupture is due to bending or shear. All of the fissures observed allows to classify the pieces as MEG according to the UNE 56544 standard. To quantify the magnitude of fissures the index of areas is proposed, while mechanical properties can be quantified by rupture energy. Analysis of the results does not show any relation between the fissures analyzed and the mode of failure, their magnitude and mechanical properties..

Se han realizado mediciones detalladas de las fendas de secado en 28 piezas de madera de pino silvestre de gran escuadría. Se han propuesto diferentes parámetros para medir su magnitud en longitud, profundidad, grosor e inclinación, así como un índice de áreas en el plano medio de rasante (superficie eficaz respecto a superficie total. Se han relacionado los parámetros de fendas con resistencia a flexión, resistencia a cortante, módulo de elasticidad y energía de rotura obtenidos mediante ensayos mecánicos, teniendo en cuenta si la rotura se produce por flexión o por cortante. Todas las fendas observadas permiten clasificar las piezas como MEG según la norma UNE 56544. Se propone cuantificar las fendas mediante el índice de áreas y las propiedades mecánicas mediante la energía de rotura. El análisis realizado no muestra una relación significativa entre las fendas analizadas, los modos de rotura o las propiedades mecánicas.

THE EFFECT OF FISSURES IN DOLOMITE ROCK MASS ON BLASTING PROJECTS

Directory of Open Access Journals (Sweden)

Branko Božić

1989-12-01

Full Text Available Rock fractures in the form of fissures are one of more important geological features of a tectonic system. They have an effect on mechanical behaviour of rook masses exposed to the actions of surface forces. For exploitation in dolomite quarries carried out by blasting of deep shot holes it is important to know the system of fissures within a rock mass for the rock brakes along already weakened planes (the paper is published in Croatian.

Thermomechanical behavior of mica layers with lenticular fissures

Science.gov (United States)

Yang, Michael Xinyi

The thermomechanical behavior of natural phlogopite mica specimens from seven different origins is characterized. An initial heat treatment, to a temperature between 300°C and 400°C, is found to form fissures that stabilize in the material. Following the initial heat treatment, all the phlogopite specimens, regardless of their origin and polytype, exhibit the extraordinarily large thermal expansion (intumescence), more than 200% at 600°C, in the direction perpendicular to the basal planes. This phenomenon is strictly reproducible when tested under a range of thermal conditions including thermal shock, multiple thermal fatigue cycles, varying heating or cooling rates and isothermal heating over an extensive period of time at different temperatures up to 585°C. The hysteresis, associated with the thermal cycle, is increased when the specimen is heated or cooled at a faster rate. The maximum coefficient of linear thermal expansion, approximately 10 -2°C-1, is observed over the temperature range 100--120°C. This is due to the non-structural water, entrapped within the layer structure, which undergoes a phase transition and causes the mica layers to expand abruptly. A model of lenticular fissures is developed based on thin-plate mechanics and thermodynamics assumptions. The state of a lenticular fissure with water vapor molecules is determined to correlate the experimental parameters with the material properties. The average density of water vapor molecules within a lenticular fissure is calculated to be ˜1025 m 3 for the temperature interval between 100°C and 275°C. The concentration of non-structure water, based on the model calculation, is less than 0.1% by weight. Acoustic emission (AE) signals have been reported by Pranevicius et al. (1995) to correspond to the microstructure changes as the internal lenticular fissures develop in phlogopite. This technique has also been proven feasible to characterize the thermomechanical behavior of other layer structures

The economics of pit and fissure sealants in preventive dentistry: a review.

Science.gov (United States)

Kitchens, Dinah H

2005-08-15

Oral diseases are progressive, cumulative, and become more intricate to treat with advancement. While dental caries is an infectious transmissible disease with children being at the highest risk, primary prevention can reduce this risk. Primary prevention in dentistry is usually considered to be community fluoridated water supplies, professional fluoride treatments, and pit and fissure sealants. While community fluoridated water supplies have been proven to be cost-effective, the cost-effectiveness of pit and fissure sealants has primarily been studied in school-based programs of children from low socio-economic backgrounds. Dental sealant programs are just one way to help increase primary prevention in the oral health disparities of children. The purpose of this paper is to review the literature regarding the cost-effectiveness of pit and fissure sealants as a preventive strategy in preventive dentistry.

Subpial Hematoma and Extravasation in the Interhemispheric Fissure with Subarachnoid Hemorrhage

Science.gov (United States)

Matsuoka, Go; Abe, Kayoko; Okada, Yoshikazu; Sakai, Shuji

2015-01-01

A recent report on computed tomography (CT) findings of contrast extravasation in subarachnoid hemorrhage (SAH) with Sylvian hematoma suggests that the occurrence of the hematoma is secondary to bleeding in the subpial space. Our patient was in his sixties and was admitted to the hospital because of loss of consciousness (Glasgow Coma Scale E4V1M4). SAH was diagnosed in plain head CT, and growing hematomas were observed in the Sylvian and interhemispheric fissures following a subarachnoid hemorrhage. CT angiography (CTA) using a dual-phase scan protocol revealed contrast extravasation in both the fissures in the latter phase, and hematoma in the interhemispheric fissure contained multiple bleeding points. This case indicates that the occurrence of subpial hematoma such as Sylvian hematoma can be a secondary event following subpial bleeding from damaged small vessels elsewhere in the cranium. Instead of four-dimensional (4D) CT, the dual-phase CTA technique may help detect minor extravasations with usual helical CT scanner. PMID:25963159

Numerical analysis on the crack propagation and failure characteristics of rocks with double fissures under the uniaxial compression

Directory of Open Access Journals (Sweden)

Leyong Chen

2015-12-01

Full Text Available The fissures and rock bridges with different dips had different contributions to crack's initiation, propagation, convergence and penetration. In this paper, based on the rock fracture theory, the crack's propagation and evolution process on rock specimen with double fissures under uniaxial compression was simulated. As a result, the crack propagation and evolution law of rocks with different fissure dips (α = 0°, 15°, 30°, 45°, 60°, 75°, 90°; β = 45° and different rock bridge dips (β = 0°, 30°, 45°, 60°, 90°; α = 45° was obtained by numerical tests. Meanwhile, the fissure and rock bridge dips influence on the macro mechanical properties of rock was analyzed. Besides, the paper investigated the influences of different fissure dips and different rock bridge dips on the bridge transfixion. The study is of great significance to reveal the impact of different dips on the mechanical mechanism of multiple-fissures rock under specific conditions, and it also has important theoretical significance for the research on multiple-fissure rock.

Land subsidence, Ground Fissures and Buried Faults: InSAR Monitoring of Ciudad Guzmán (Jalisco, Mexico

Directory of Open Access Journals (Sweden)

Carlo Alberto Brunori

2015-07-01

Full Text Available We study land subsidence processes and the associated ground fissuring, affecting an active graben filled by thick unconsolidated deposits by means of InSAR techniques and fieldwork. On 21 September 2012, Ciudad Guzmán (Jalisco, Mexico was struck by ground fissures of about 1.5 km of length, causing the deformation of the roads and the propagation of fissures in adjacent buildings. The field survey showed that fissures alignment is coincident with the escarpments produced on 19 September 1985, when a strong earthquake with magnitude 8.1 struck central Mexico. In order to detect and map the spatio-temporal features of the processes that led to the 2012 ground fissures, we applied InSAR multi-temporal techniques to process ENVISAT-ASAR and RADARSAT-2 satellite SAR images acquired between 2003 and 2012. We detect up to 20 mm/year of subsidence of the northwestern part of Ciudad Guzmán. These incremental movements are consistent with the ground fissures observed in 2012. Based on interferometric results, field data and 2D numerical model, we suggest that ground deformations and fissuring are due to the presence of areal subsidence correlated with variable sediment thickness and differential compaction, partly driven by the exploitation of the aquifers and controlled by the distribution and position of buried faults.

In Vitro Comparison of Microleakage of Two Materials Used as Pit and Fissure Sealants

Directory of Open Access Journals (Sweden)

Zahra Bahrololoomi

2011-09-01

Full Text Available Background and aims. Marginal seal of the material is extremely important in fissure sealant therapy. The aim of this study was to investigate microleakage of flowable composite resins and conventional fissure sealants with or without dentin bonding agent. Materials and methods. The occlusal surface of 60 intact extracted human premolars, divided into four groups, were cleaned with pumice/slurry, etched with 37% phosphoric acid for 15 seconds, rinsed and dried. Groups were treated differently: Excite bonding agent followed by Helioseal F fissure sealant in group1; Helioseal F alone in group 2; Excite bonding agent followed by Tetric Flow in group 3; and Tetric Flow alone in group 4. Light-curing was done after each application. After thermocycling, the whole surface of each specimen was coated with nail varnish except for one millimeter around the fissure sealant. The teeth were immersed in 2% basic fuchsin for 24 hours and then sectioned buccolingually. The sections were analyzed for leakage under a stereomicroscope. Data was analyzed by Kruskal-Wallis and Mann-Whitney tests at a significance level of P 0.05, except for groups 2 and 4 (P = 0.002 and groups 3 and 4 (P = 0.033. Conclusion. Use of a flowable composite with bonding agent is a good alternative for sealing pits and fissures; however, further in vitro and in vivo studies are necessary.

Comparison of various concentrations of tricalcium phosphate nanoparticles on mechanical properties and remineralization of fissure sealants.

Directory of Open Access Journals (Sweden)

Sara Tavassoli-Hojjati

2014-08-01

Full Text Available The aim of this study was to investigate the mechanical properties (flexural strength, micro-shear bond strength and remineralizing potential of fissure sealants by adding various concentrations of β-tricalcium phosphate nanoparticles.This in-vitro study consisted of five experimental groups containing prepared nano-fisssure sealants (1-5 wt.% β-TCP nanoparticles and two control groups containing a prepared and a commercial fissure sealant. Flexural/micro-shear bond strength values were measured using Zwick test machine. Cavities on sixty healthy premolar teeth were filled with the fissure sealants containing 0-5 wt.% of nano β-TCP. The samples were assessed for remineralization under scanning electron microscopy (SEM and EDAX. Kolmogorov-Smirnov test, One-way ANOVA and Tukey's Post Hoc analysis/HSD were used to analyze the data.There was no significant difference between the flexural strengths/elastic modulus of the 0-5 wt.% nano β-TCP groups (p>0.05. The average flexural strength/elastic modulus of the prepared fissure sealant group (0% was significantly higher than the commercial fissure sealant group (Clinpro (p0.05. Examining the samples under SEM showed a significant increase in thickness of the intermediate layer with increasing concentrations of β-TCP nanoparticles (p<0.05.Addition of 1-5 wt.% β-TCP nanoparticles to the fissure sealants significantly increased the remineralization potential without affecting the mechanical properties.

A model of hydrological and mechanical feedbacks of preferential fissure flow in a slow-moving landslide

Directory of Open Access Journals (Sweden)

D. M. Krzeminska

2013-03-01

Full Text Available The importance of hydrological processes for landslide activity is generally accepted. However, the relationship between precipitation, hydrological responses and movement is not straightforward. Groundwater recharge is mostly controlled by the hydrological material properties and the structure (e.g., layering, preferential flow paths such as fissures of the unsaturated zone. In slow-moving landslides, differential displacements caused by the bedrock structure complicate the hydrological regime due to continuous opening and closing of the fissures, creating temporary preferential flow paths systems for infiltration and groundwater drainage. The consecutive opening and closing of fissure aperture control the formation of a critical pore water pressure by creating dynamic preferential flow paths for infiltration and groundwater drainage. This interaction may explain the seasonal nature of the slow-moving landslide activity, including the often observed shifts and delays in hydrological responses when compared to timing, intensity and duration of precipitation. The main objective of this study is to model the influence of fissures on the hydrological dynamics of slow-moving landslide and the dynamic feedbacks between fissures, hydrology and slope stability. For this we adapt the spatially distributed hydrological and slope stability model (STARWARS to account for geotechnical and hydrological feedbacks, linking between hydrological response of the landside and the dynamics of the fissure network and applied the model to the hydrologically controlled Super-Sauze landslide (South French Alps.

Microleakage, adaptation ability and clinical efficacy of two fluoride releasing fissure sealants

Directory of Open Access Journals (Sweden)

Marković Dejan

2012-01-01

Full Text Available Background/Aim. Retention of fissure sealants and good adaptation to enamel are essential for their success. Fluoride releasing resin-based materials are widely accepted for pit and fissure sealing, but newly designed glass ionomers can serve as a good alternative. The aim of this study was to evaluate microleakage and sealing ability in vitro, and to clinically assess two fluoride releasing fissure sealants. Methods. The sample for experimental study consisted of 20 freshly extracted intact human third molars, divided in two experimental groups according to the sealing material: fluoride releasing resin-based (Heliosel F and glass ionomer (Fuji Triage material. Digital images and scanning electron microscope were used to assess microleakage and adaptation ability. Sample for clinical study consisted of 60 children, aged 6-8 years, with high caries risk, divided in two groups according to the sealant material. Fissure sealant was applied to all erupted, caries-free first permanent molars. Sealants were evaluated after 3, 6 and 12 months using modified Ryge criteria for retention, marginal adaptation, colour match, surface smoothness and caries. Results. Microleakage was detected in more than half of the specimen, without significant differences between the two groups (p > 0.05. Both materials exhibited acceptable sealing ability. Complete retention at the end of the observation period was 81.8% for resin-based, and 21.1% for glass-ionomer fissure sealant (p < 0.001. The presence of caries in sealed molars has been detected in one patient in both groups. During the 12-month observation period, Helioseal F demonstrated better retention, marginal adaptation and surface smoothness (p < 0.001. There were no differences between the two materials regarding caries and color match (p > 0.05. Conclusion. Both tested materials demonstrate satisfactory clinical and caries prophylactic characteristics that justify their use in contemporary preventive

An MR study on widening of the anterior cerebral longitudinal fissure in patients with schizophrenia

International Nuclear Information System (INIS)

Yoshizawa, Masao; Nagumo, Ichiro; Kimura, Hiroko; Yamamoto, Setsuko; Kumagai, Hideo; Ito, Hisao.

1994-01-01

One-hundred and four schizophrenics and 27 normal controls underwent magnetic resonance imaging. The angles of the anterior cerebral longitudial (ACL) fissure on T 1 weighted images were measured on the axial slices at the level of the third ventricle. The schizophrenics had significantly larger angles of ACL fissure than controls. However, the effect of aging might be associated with this phenomenon. There was no correlation between subtype of schizophrenia and the augment of the fissure angle, nor correlation between the duration of schizophrenia and that augment. From this study, it can be concluded that if the fissure angle is larger than 12 degree the finding is regarded as abnormal, because 95% confidence region of the control group was at 11.1 degree. Twenty two schizophrenics revealed the findings and great majority of these patients were suffering from emotional withdrawal and blunted affect. (author)

CF3CH(ONO)CF3: Synthesis, IR spectrum, and use as OH radical source for kinetic and mechanistic studies

DEFF Research Database (Denmark)

Andersen, Mads Peter Sulbæk; Hurley, MD; Ball, JC

2003-01-01

The synthesis, IR spectrum, and first-principles characterization of CF3CH(ONO)CF3 as well as its use as an OH radical source in kinetic and mechanistic studies are reported. CF3CH(ONO)CF3 exists in two conformers corresponding to rotation about the RCO-NO bond. The more prevalent trans conformer......C(O)CF3 and, by implication, OH radicals in 100% yield. CF3CH(ONO)CF3 photolysis is a convenient source of OH radicals in the studies of the yields of CO, CO2, HCHO, and HC(O)OH products which can be difficult to measure using more conventional OH radical sources (e.g., CH3ONO photolysis). CF3CH...

Injectabilite des coulis de ciment dans des milieux fissures

Science.gov (United States)

Mnif, Thameur

Le travail presente ici est un bilan du travaux de recherche effectues sur l'injectabilite des coulis de ciment dans lu milieux fissures. Un certain nombre de coulis a base de ciment Portland et microfin ont ete selectionnes afin de caracteriser leur capacite a penetrer des milieux fissures. Une partie des essais a ete menee en laboratoire. L'etude rheologique des differents melanges a permis de tester l'influence de l'ajout de superplastifiant et/ou de fumee de silice sur la distribution granulometrique des coulis et par consequent sur leur capacite a injecter des colonnes de sable simulant un milieu fissure donne. La classe granulometrique d'un coulis, sa stabilite et sa fluidite sont apparus comme les trois facteurs principaux pour la reussite d'une injection. Un facteur de finesse a ete defini au cours de cette etude: base sur la classe granulometrique du ciment et sa stabilite, il peut entrer dans la formulation theorique du debit d'injection avant application sur chantier. La deuxieme et derniere partie de l'etude presente les resultats de deux projets de recherche sur l'injection realises sur chantier. L'injection de dalles de beton fissurees a permis le suivi de l'evolution des pressions avec la distance au point d'injection. L'injection de murs de maconnerie a caractere historique a montre l'importance de la definition de criteres de performance des coulis a utiliser pour traiter un milieu donne et pour un objectif donne. Plusieurs melanges peuvent ainsi etre predefinis et mis a disposition sur le chantier. La complementarite des ciments traditionnels et des ciments microfins devient alors un atout important. Le choix d'utilisation de ces melanges est fonction du terrain rencontre. En conclusion, cette recherche etablit une methodologie pour la selection des coulis a base de ciment et des pressions d'injection en fonction de l'ouverture des fissures ou joints de construction.

Fissure formation in coke. 3: Coke size distribution and statistical analysis

Energy Technology Data Exchange (ETDEWEB)

D.R. Jenkins; D.E. Shaw; M.R. Mahoney [CSIRO, North Ryde, NSW (Australia). Mathematical and Information Sciences

2010-07-15

A model of coke stabilization, based on a fundamental model of fissuring during carbonisation is used to demonstrate the applicability of the fissuring model to actual coke size distributions. The results indicate that the degree of stabilization is important in determining the size distribution. A modified form of the Weibull distribution is shown to provide a better representation of the whole coke size distribution compared to the Rosin-Rammler distribution, which is generally only fitted to the lump coke. A statistical analysis of a large number of experiments in a pilot scale coke oven shows reasonably good prediction of the coke mean size, based on parameters related to blend rank, amount of low rank coal, fluidity and ash. However, the prediction of measures of the spread of the size distribution is more problematic. The fissuring model, the size distribution representation and the statistical analysis together provide a comprehensive capability for understanding and predicting the mean size and distribution of coke lumps produced during carbonisation. 12 refs., 16 figs., 4 tabs.

A method for the automatic quantification of the completeness of pulmonary fissures: evaluation in a database of subjects with severe emphysema

Energy Technology Data Exchange (ETDEWEB)

Rikxoort, Eva M. van; Goldin, Jonathan G.; Galperin-Aizenberg, Maya; Abtin, Fereidoun; Kim, Hyun J.; Lu, Peiyun; Shaw, Greg; Brown, Matthew S. [University of California-Los Angeles, Center for Computer Vision and Imaging Biomarkers and Thoracic Imaging Research Group, Department of Radiological Sciences, David Geffen School of Medicine, Los Angeles, CA (United States); Ginneken, Bram van [Radboud University Nijmegen Medical Centre, Diagnostic Image Analysis Group, Department of Radiology, Nijmegen (Netherlands); University Medical Center Utrecht, Image Sciences Institute, Department of Radiology, Utrecht (Netherlands)

2012-02-15

To propose and evaluate a technique for automatic quantification of fissural completeness from chest computed tomography (CT) in a database of subjects with severe emphysema. Ninety-six CT studies of patients with severe emphysema were included. The lungs, fissures and lobes were automatically segmented. The completeness of the fissures was calculated as the percentage of the lobar border defined by a fissure. The completeness score of the automatic method was compared with a visual consensus read by three radiologists using boxplots, rank sum tests and ROC analysis. The consensus read found 49% (47/96), 15% (14/96) and 67% (64/96) of the right major, right minor and left major fissures to be complete. For all fissures visually assessed as being complete the automatic method resulted in significantly higher completeness scores (mean 92.78%) than for those assessed as being partial or absent (mean 77.16%; all p values <0.001). The areas under the curves for the automatic fissural completeness were 0.88, 0.91 and 0.83 for the right major, right minor and left major fissures respectively. An automatic method is able to quantify fissural completeness in a cohort of subjects with severe emphysema consistent with a visual consensus read of three radiologists. (orig.)

Pit and fissure sealants versus fluoride varnishes for preventing dental decay in children and adolescents

DEFF Research Database (Denmark)

Hiiri, Anne; Ahovuo-Saloranta, Anneli; Nordblad, Anne

2010-01-01

the effectiveness of pit and fissure sealants to be statistically significantly higher than an application of fluoride varnish every 6 months in preventing occlusal decays of first molars at 23 months (with a RR of 0.74, 95% confidence interval (CI) 0.58 to 0.95); and at 4 years and 9 years (with a RR of 0.42, 95...... caries on the fluoride varnished tooth surfaces, compared to sealed plus fluoride varnished surfaces, with a RR of 0.36 (95% CI 0.21 to 0.61). AUTHORS' CONCLUSIONS: There was some evidence on the superiority of pit and fissure sealants over fluoride varnish application in the prevention of occlusal......BACKGROUND: The majority of the detected increment in dental caries among children and adolescents is confined to pit and fissure surfaces of first molars. OBJECTIVES: The objective of this study was to compare the effectiveness of pit and fissure sealants with fluoride varnishes in the prevention...

Pit and fissure sealants for preventing dental decay in permanent teeth

DEFF Research Database (Denmark)

Ahovuo-Saloranta, Anneli; Forss, Helena; Walsh, Tanya

2017-01-01

to 3 August 2016), and Embase Ovid (1980 to 3 August 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials to 3 August 2016. No restrictions were placed on language or date of publication. Selection criteria......Background: Dental sealants were introduced in the 1960s to help prevent dental caries, mainly in the pits and fissures of occlusal tooth surfaces. Sealants act to prevent bacteria growth that can lead to dental decay. Evidence suggests that fissure sealants are effective in preventing caries....... Further research with long follow-up is needed....

Effect of an Antibacterial Monomer on the Antibacterial Activity of a Pit-and-Fissure Sealant.

Directory of Open Access Journals (Sweden)

Fan Yu

Full Text Available Resin-based pit-and-fissure sealants are often used to form a barrier on the occlusal surface of molars to treat caries lesions; however, bacteria can remain in the pit and fissures without detection, increasing the risk of secondary caries. Sealants with antimicrobial properties or microbial repellent actions might be advantageous. The aim of this study was to assess the inhibitory effect of a 2-methacryloxylethyl dodecyl methyl ammonium bromide (MAE-DB-incorporated sealant against Streptococcus mutans. MAE-DB (4% wt was incorporated into a commercially available sealant, Eco-S resin-based pit-and-fissure sealant (Vericom Co., Ltd., Korea; a sealant without MAE-DB served as a negative control, and Clinpro™ Sealant (3M™ ESPE™, a fluoride-releasing resin, was used as a commercial control. The effects of the cured sealants and their eluents on the growth of S. mutans were determined according to colony-forming unit counts and metabolic tests. The effects of the cured sealants on the adherence and membrane integrity of S. mutans were investigated using confocal laser-scanning microscopy (CLSM in conjunction with fluorescent indicators. Compared with the negative control and commercial control, the cured MAE-DB-incorporated pit-and-fissure sealant exhibited a significant inhibitory effect on the growth of S. mutans (P < 0.05, whereas the eluents did not show any detectable antibacterial activity. The commercial control also showed no detectable bactericidal activity. Moreover, the aged experimental material retained its property of contact inhibition of biofilm formation. The fluorescence analysis of CLSM images demonstrated that the cured MAE-DB-incorporated sealant could hamper the adherence of S. mutans and exert a detrimental effect on bacterial membrane integrity. The incorporation of MAE-DB can render a pit-and-fissure sealant with contact antibacterial activity after polymerization via influencing the growth, adherence, and membrane

A COMPARATIVE STUDY OF LATERAL SPHINCTEROTOMY AND LOCAL APPLICATION OF 2% DILTIAZEM GEL IN TREATMENT OF CHRONIC ANAL FISSURE

Directory of Open Access Journals (Sweden)

Rajashekar

2015-11-01

Full Text Available BACKGROUND AND OBJECTIVES Anal fissures are commonly encountered in routine colorectal practice. Chronic fissures have traditionally been treated surgically. Developments in the pharmacological understanding of the internal anal sphincter have resulted in more conservative approaches towards treatment. In this study, we compare topical 2% Diltiazem gel and lateral internal sphincterotomy with respect to symptomatic relief, healing and side effects in the treatment of chronic fissure in ano. METHODS 60 patients with chronic fissure in ano were randomly divided into Diltiazem gel and internal sphincterotomy groups. Patients were followed up at weekly intervals for minimum of eight weeks. Data was recorded accordingly. RESULTS Fissure completely healed in 28(93.33% out of 30 patients treated with 2% Diltiazem gel between 4-8 weeks. Healing was 100% with internal sphincterotomy. The mean duration required for healing of fissure was 4.86 weeks in Diltiazem gel group and 3.66 weeks in internal sphincterotomy group. 61.5% patients were free from pain after treatment with Diltiazem gel whereas in internal sphicterotomy group 66.66% patients had pain relief at the end of 4 weeks. INTERPRETATION AND CONCLUSION Comparison between Diltiazem gel application and internal sphincterotomy did not show any significant difference in fissure healing and pain relief. No side effects were seen in Diltiazem gel therapy. Topical Diltiazem should be the initial treatment in chronic fissure in ano. It is better to reserve internal sphincterotomy for patients with relapse or therapeutic failure to prior pharmacological treatment.

The movement of solutes through aqueous fissures in porous rock

International Nuclear Information System (INIS)

Glueckauf, E.

1980-06-01

A mathematical treatment has been given for the movement of materials dissolved in water flowing through narrow fissures of a micro-porous substrate. As there is no water flow in these micro-pores, equilibrium between the aqueous solution and the micro-porous substrate proceeds only by diffusion, with the result that there arises a gross disequilibrium. Two major effects arise: first, the hold-up in the substrate - even when there is no adsorption taking place - is orders of magnitude larger than on non-porous substrate, and increases even further, if adsorption takes place. Secondly, dispersion caused by non-equilibrium is also orders of magnitude greater than dispersion arising from convection effects of the water flow in interconnecting fissures. As a result, the solutes arrive very much later at the end of the underground fissures, and in concentrations which are very much lower than have been calculated in previous modelling experiments. The significance of these effects is discussed in detail, and this can be helpful in the selection of sites for underground disposal of radioactive waste. It is now quite feasible to specify sites with conditions, where even solutes with minimal adsorption would not return to the surface within a million years, and where solutes of moderately strong adsorption would be effectively immobile. (author)

Absolute rate constants for the reaction of CF3O2 and CF3O radicals with NO at 295 K

DEFF Research Database (Denmark)

Sehested, J.; Nielsen, O.J.

1993-01-01

Using a pulse radiolysis UV absorption technique and subsequent simulations of experimental NO2 and FNO absorption transients, rate constants for reaction between CF3O and CF3O2 radicals with NO were determined, CF3O2+NO-->CF3O+NO2 (3), CF3O+NO-->CF2O+FNO (5). k3 was derived to be (1.68+/-0.26)x10...

Homogeneity and fissure determination in uranium bars with solid state nuclear track detectors

Energy Technology Data Exchange (ETDEWEB)

Castillo, F. (Universidad Nacional Autonoma de Mexico, Mexico City. Facultad de Ciencias); Gamboa, I.; Espinosa, G.; Tapia, A. (Universidad Nacional Autonoma de Mexico, Mexico City. Inst. de Fisica); Somogyi, G. (Magyar Tudomanyos Akademia, Debrecen. Atommag Kutato Intezete)

1984-01-01

A simple and efficient method for determining fissure and concentration inhomogeneity in uranium bars is the alpha-radiographic technique. In our present work uranium bars made by ININ (Mexico) were studied by using CR-39 track detectors. The space inhomogeneity in track density was measured by an optical densitometer. The presence of fissure is determined by a microfiche reader. Such a study takes only few hours and does not require sophisticated instrumentation.

Different scale land subsidence and ground fissure monitoring with multiple InSAR techniques over Fenwei basin, China

Directory of Open Access Journals (Sweden)

C. Zhao

2015-11-01

Full Text Available Fenwei basin, China, composed by several sub-basins, has been suffering severe geo-hazards in last 60 years, including large scale land subsidence and small scale ground fissure, which caused serious infrastructure damages and property losses. In this paper, we apply different InSAR techniques with different SAR data to monitor these hazards. Firstly, combined small baseline subset (SBAS InSAR method and persistent scatterers (PS InSAR method is used to multi-track Envisat ASAR data to retrieve the large scale land subsidence covering entire Fenwei basin, from which different land subsidence magnitudes are analyzed of different sub-basins. Secondly, PS-InSAR method is used to monitor the small scale ground fissure deformation in Yuncheng basin, where different spatial deformation gradient can be clearly discovered. Lastly, different track SAR data are contributed to retrieve two-dimensional deformation in both land subsidence and ground fissure region, Xi'an, China, which can be benefitial to explain the occurrence of ground fissure and the correlation between land subsidence and ground fissure.

Scandinavian Nurse Specialist Group/Cystic Fibrosis (SNSG/CF)

DEFF Research Database (Denmark)

Bregnballe, Vibeke; Erwander, Inger

2006-01-01

/CF comprises one CF nurse from each of the centers. The board meets twice a year to plan workshops and courses. SNSG/CF is part of the International Nurse Specialist Group/Cystic Fibrosis (INSG/CF). Results: Within the framework of SNSG/CF a 2-day workshop is held every second year for approximately 40...

influence of drying temperature and storage duration on fissuring

African Journals Online (AJOL)

User

age duration on the cracking behaviour and head rice yield of a local rice variety - Jasmine 85. ... harvesting, processing and storage. The rice industry ... cm deep which is within the thickness consid- ered as a ..... Tracing fissure information by.

Atmospheric chemistry of 4 : 2 fluorotelomer alcohol (CF3(CF2)(3)CH2CH2OH): Products and mechanism of Cl atom initiated oxidation

DEFF Research Database (Denmark)

Hurley, MD; Ball, JC; Wallington, TJ

2004-01-01

Smog chamber/FTIR techniques were used to study the products and mechanism of the Cl atom initiated oxidation of 4:2 fluorotelomer alcohol (CF3(CF2)(3)CH2CH2OH) in 700 Torr of N-2/O-2 diluent at 296 K. CF3(CF2)(3)CH2CHO is the sole primary oxidation product. CF3(CF2)(3)CHO, CF3(CF2)(3)CH2COOH...... respectively. Using relative rate techniques, a value of k(Cl + CF3(CF2)(3)CH2CHO) = (1.84 +/- 0.30) x 10(-11) cm(3) molecule(-1) s(-1) was determined. The yield of the perfluorinated acid, CF3(CF2)(3)COOH, from the 4:2 fluorotelomer alcohol increased with the diluent gas oxygen concentration......, and CF3(CF2)(3)CH2C(O)OOH are secondary oxidation products. Further irradiation results in the formation of CF3(CF2)(3)COOH, COF2, and CF3OH. CF3(CF2)(3)CHO, CF3(CF2)(3)CH2COOH, and CF3(CF2)(3)CH2C(O)OOH are formed from CF3(CF2)(3)CH2CHO oxidation in yields of 46 27 and less than or equal to 27...

A comparison between three different pit and fissure sealants with regard to marginal integrity.

Science.gov (United States)

Fernandes, Kristlee Sabrin; Chalakkal, Paul; de Ataide, Ida de Noronha; Pavaskar, Rajdeep; Fernandes, Precylia Philo; Soni, Harleen

2012-04-01

THE AIM OF THIS STUDY IS TO COMPARE THE OCCURRENCE OF ENAMEL FRACTURES, SEALANT FRACTURES AND MARGINAL FISSURES AFTER PLACEMENT OF THREE SEALANTS: Helioseal F, Conseal F and Clinpro. Thirty individuals between 13 and 15 years of age, diagnosed with pit and fissure caries by visual and DIAGNOdent examination, were chosen for sealant placement on their mandibular molars. The sealants were placed at random, after which, impressions were made with polyvinyl siloxane and casts were fabricated. Dies were prepared, each of which were sputter coated with gold in order to be examined under a scanning electron microscope. The following morphologies were analyzed from dies from each of the sealant groups: Continuous margins, sealant fractures, marginal fissures and enamel fractures. After six months, they were recalled for impression making. Dies were prepared and microscopically analyzed as mentioned. Based on the time of evaluation, there were two groups: Initial group (soon after placement) and final group (after six months). Statistical analysis was done using the paired 't' test and One-way analysis of variance (ANOVA). Clinpro had the greatest fracture resistance, followed by Conseal F and Helioseal F. The occurrence of marginal fissure was found to be least with Clinpro.

An Experimental and Numerical Study on Cracking Behavior of Brittle Sandstone Containing Two Non-coplanar Fissures Under Uniaxial Compression

Science.gov (United States)

Yang, Sheng-Qi; Tian, Wen-Ling; Huang, Yan-Hua; Ranjith, P. G.; Ju, Yang

2016-04-01

To understand the fracture mechanism in all kinds of rock engineering, it is important to investigate the fracture evolution behavior of pre-fissured rock. In this research, we conducted uniaxial compression experiments to evaluate the influence of ligament angle on the strength, deformability, and fracture coalescence behavior of rectangular prismatic specimens (80 × 160 × 30 mm) of brittle sandstone containing two non-coplanar fissures. The experimental results show that the peak strength of sandstone containing two non-coplanar fissures depends on the ligament angle, but the elastic modulus is not closely related to the ligament angle. With the increase of ligament angle, the peak strength decreased at a ligament angle of 60°, before increasing up to our maximum ligament angle of 120°. Crack initiation, propagation, and coalescence were all observed and characterized from the inner and outer tips of pre-existing non-coplanar fissures using photographic monitoring. Based on the results, the sequence of crack evolution in sandstone containing two non-coplanar fissures was analyzed in detail. In order to fully understand the crack evolution mechanism of brittle sandstone, numerical simulations using PFC2D were performed for specimens containing two non-coplanar fissures under uniaxial compression. The results are in good agreement with the experimental results. By analyzing the stress field, the crack evolution mechanism in brittle sandstone containing two non-coplanar fissures under uniaxial compression is revealed. These experimental and numerical results are expected to improve the understanding of the unstable fracture mechanism of fissured rock engineering structures.

Clinical Evaluation of applying a hydrophobic and a hydrophilic bonding agent on the retention and durability of fissure sealant therapy

Directory of Open Access Journals (Sweden)

Mostafa GHandi

2016-03-01

Full Text Available Background and Aims: As in fissure sealant therapy the tooth surface is mostly enamel, the use of an enamel bonding agent (hydrophobic bonding agent may be more cost effective than that of newer generations of bonding (hydrophilic bonding agents. The aim of this study was to compare the retention and durability of fissure sealant therapy when applying an enamel bonding agent, a dentin bonding agent and no bonding agent during 4 years. Materials and Methods: This study was done on the first permanent molars of the upper and lower jaws of 24 students of the first grade of a primary school (6-7 years old. On 36 teeth, a dentin bonding agent (Excite was applied under the fissure sealant and on 36 teeth an enamel bonding agent (Margin bond was applied under the fissure sealant. Then, 24 teeth were selected from these two groups and were compared with a group (including 24 teeth with no bonding agent under the fissure sealant (as control group. All the fissures of the teeth were evaluated annually for 4 years to find out the presence or absence of fissure sealant substance. Data were analyzed using Wilcoxon test. Results: From the statistical analysis, there was no significant difference in retention and durability of the fissure sealant substance comparing the group with dentin bonding agent (Excite and the group with enamel bonding agent (Margin bond. Also, using a bonding agent made no significant difference (P>0.05. Conclusion: According to the results of this study, using a bonding agent made no improvement in the retention and durability of fissure sealant substance.

Tracer movement in a single fissure in granitic rock - some experimental results and their interpretation

International Nuclear Information System (INIS)

Neretnieks, I.; Eriksen, T.; Taetinen, P.

1980-08-01

Radionuclide migration was studied in a natural fissure in a granite core. The fissure was oriented parallel to the axis in a cylindrical core 30 cm long and 20 in diameter. The traced solution was injected at one end of the core and collected at the other. Breakthrough curves were obtained for the nonsorbing tracers tritiated water, and a large molecular weight lignosulphonate molecule and the sorbing tracers cesium and strontium. From the breakthrough curves for the nonsorbing tracers it could be concluded that channeling occurs in the single fissure. A 'dispersion' model based on channeling is presented. The results from the sorbing tracers indicate that there is substantial diffusion into and sorption in the rock matrix. Sorption on the surface of the fissure also accounts for a part of the retardation effect of the sorbing species. A model which includes the mechanisms of channeling, surface sorption matrix diffusion and matrix sorption is presented. The experimental breakthrough curves can be fitted fairly well by this model by use of independently obtained data on diffusivities and matrix sorption. (author)

Tracer Movement in a Single Fissure in Granitic Rock: Some Experimental Results and Their Interpretation

Science.gov (United States)

Neretnieks, Ivars; Eriksen, Tryggve; TäHtinen, PäIvi

1982-08-01

Radionuclide migration was studied in a natural fissure in a granite core. The fissure was oriented parallel to the axis in a cylindrical core 30 cm long and 20 cm in diameter. The traced solution was injected at one end of the core and collected at the other. Breakthrough curves were obtained for the nonsorbing tracers, tritiated water, and a large-molecular-weight lignosulphonate molecule and for the sorbing tracers, cesium and strontium. From the breakthrough curves for the nonsorbing tracers it could be concluded that channeling occurs in the single fissure. A `dispersion' model based on channeling is presented. The results from the sorbing tracers indicate that there is substantial diffusion into and sorption in the rock matrix. Sorption on the surface of the fissure also accounts for a part of the retardation effect of the sorbing species. A model which includes the mechanisms of channeling, surface sorption, matrix diffusion, and matrix sorption is presented. The experimental breakthrough curves can be fitted fairly well by this model by use of independently obtained data on diffusivities and matrix sorption.

Comparative study of resin sealant and resin modified glass ionomer as pit and fissure sealant

Directory of Open Access Journals (Sweden)

Shirin Malek

2017-02-01

Full Text Available The purpose of the present study was to compare the marginal integrity of resin modified glass ionomer cement with that of resin sealant, in vitro. Forty artificial pit and fissure cavities were prepared in occlusal surface of extracted premolar teeth by using ¼ round carbide bur. Cavities were condensed with artificial organic debris followed by cleaning with prophylaxis pumice brush and paste and then separated into two treatment groups. In Group A, 15 fissure cavities were sealed by resin sealant and in Group B, 15 fissure cavities were sealed by resin modified glass ionomer sealant. These specimens were subjected to thermo-cycling followed by dye penetration test. The remaining 5 cavities from each group were analyzed for debris score by the SEM. The results of the microleakage test showed that the efficacy of preventing microleakage of samples sealed by resin modified glass ionomer sealant was higher than the samples sealed by resin sealant. However, no significant differences were found. It can be concluded that use of resin modified glass ionomer sealant is a good alternative for sealing pits and fissures.

Skin hydration of the heel with fissure in patients with diabetes: a cross-sectional observational study

Directory of Open Access Journals (Sweden)

Oe M

2018-06-01

Full Text Available Makoto Oe,1 Kimie Takehara,2 Hiroshi Noguchi,3 Yumiko Ohashi,4 Mayu Fukuda,1 Takashi Kadowaki,5 Hiromi Sanada1,6 1Global Nursing Research Center, 2Department of Advanced Nursing Technology, 3Department of Life Support Technology (Molten, Graduate School of Medicine, The University of Tokyo, 4Department of Nursing, The University of Tokyo Hospital, 5Department of Diabetes and Metabolic Diseases, 6Department of Gerontological Nursing/Wound Care Management, Graduate School of Medicine, The University of Tokyo, Tokyo, Japan Purpose: Foot fissure should be prevented in patients with diabetes due to the likelihood of subsequent diabetic ulcer. The purpose of this study was to investigate a cutoff point for skin hydration with fissure and the factors associated with low skin hydration in patients with diabetes. Subjects and methods: Subjects were patients with diabetes who visited the diabetic foot clinic and were evaluated for skin hydration on the heel between April 2008 and March 2015. Information about fissure, skin hydration, age, sex, autonomic neuropathy, angiopathy, and tinea pedis were collected from the medical charts. Skin hydration on the heel was measured using a moisture checker. Skin hydration was compared between heels with and without fissure, and a cutoff for skin hydration with fissure was determined using receiver operating characteristic analysis. Based on the determined cutoff, factors associated with lower skin hydration were analyzed using logistic regression analysis. Results: Participants comprised 693 patients. Mean±SD age was 66.8±10.8 years, and 57.0% of subjects were male. The frequency of fissures on the heels was 10.4%. Area under the receiver operating characteristic curve for skin hydration in the presence of fissure was 0.717. Twenty percent was selected as the cutoff point, offering sensitivity of 0.478 and specificity of 0.819. Logistic regression analysis showed correlations between three factors (male sex, tinea

A 1-year clinical evaluation of fissure sealants on permanent first molars

Directory of Open Access Journals (Sweden)

Nupur Ninawe

2012-01-01

Full Text Available Objective : To evaluate and compare the retention, marginal discoloration, surface texture and anatomical form of pit and fissure sealants. Materials and Methods : Thirty children between the ages of 6 and 10 years, who were attending the school health program regularly, had participated in the study. A split-mouth design was used in which the two fissure sealants (Helioseal-F and Glass ionomer Fuji VII were randomly placed in 60 matched contralateral pairs of permanent molar teeth. Sealants were rated by a single trained and calibrated examiner using mouth mirrors and probes following the US Public Health Service criteria. The sealants were evaluated at 3 months, 6 months and 1 year intervals. Results : The data obtained for retention, marginal discoloration, surface texture and anatomical form of pit and fissure sealants were tabulated and compared statistically using the Chi-square test of significance. Conclusion : The Helioseal-F sealant was better than the Glass ionomer Fuji VII sealant with respect to retention, anatomical form and surface texture. Both the materials showed similar results with respect to marginal discoloration.

Utility of Indocyanine Green Video Angiography for Sylvian Fissure Dissection in Subarachnoid Hemorrhage Patients - Sylvian ICG Technique.

Science.gov (United States)

Toi, Hiroyuki; Matsushita, Nobuhisa; Ogawa, Yukari; Kinoshita, Keita; Satoh, Kohei; Takai, Hiroki; Hirai, Satoshi; Hara, Keijiro; Matsubara, Shunji; Uno, Masaaki

2018-02-15

Indocyanine green (ICG) emits fluorescence in the far-red domain under light excitation. ICG video angiography (ICG-VA) has been established as a useful method to evaluate blood flow in the operative field. We report the usefulness of ICG-VA for Sylvian fissure dissection in patients with subarachnoid hemorrhage (SAH). Subjects comprised 7 patients who underwent ICG-VA before opening the Sylvian fissure during neck clipping for ruptured cerebral aneurysm. We observed contrasted Sylvian veins before opening the Sylvian fissure using surgical microscopes. This procedure was termed "Sylvian ICG". We observed ICG fluorescence quickly in all cases. Sylvian veins that appeared unclear in the standard microscopic operative field covered with subarachnoid hemorrhage were extremely clearly depicted. These Sylvian ICG findings were helpful in identifying entry points and the dissecting course of the Sylvian fissure. At the time of clipping, no residual fluorescence from Sylvian ICG was present, and aneurysm clipping was not impeded. Sylvian ICG for SAH patients is a novel technique to facilitate dissection of the Sylvian fissure. We believe that this technique will contribute to improved safety of clipping surgery for ruptured aneurysms.

Impact de la preparation des anodes crues et des conditions de cuisson sur la fissuration dans des anodes denses

Science.gov (United States)

Amrani, Salah

La fabrication de l'aluminium est realisee dans une cellule d'electrolyse, et cette operation utilise des anodes en carbone. L'evaluation de la qualite de ces anodes reste indispensable avant leur utilisation. La presence des fissures dans les anodes provoque une perturbation du procede l'electrolyse et une diminution de sa performance. Ce projet a ete entrepris pour determiner l'impact des differents parametres de procedes de fabrication des anodes sur la fissuration des anodes denses. Ces parametres incluent ceux de la fabrication des anodes crues, des proprietes des matieres premieres et de la cuisson. Une recherche bibliographique a ete effectuee sur tous les aspects de la fissuration des anodes en carbone pour compiler les travaux anterieurs. Une methodologie detaillee a ete mise au point pour faciliter le deroulement des travaux et atteindre les objectifs vises. La majorite de ce document est reservee pour la discussion des resultats obtenus au laboratoire de l'UQAC et au niveau industriel. Concernant les etudes realisees a l'UQAC, une partie des travaux experimentaux est reservee a la recherche des differents mecanismes de fissuration dans les anodes denses utilisees dans l'industrie d'aluminium. L'approche etait d'abord basee sur la caracterisation qualitative du mecanisme de la fissuration en surface et en profondeur. Puis, une caracterisation quantitative a ete realisee pour la determination de la distribution de la largeur de la fissure sur toute sa longueur, ainsi que le pourcentage de sa surface par rapport a la surface totale de l'echantillon. Cette etude a ete realisee par le biais de la technique d'analyse d'image utilisee pour caracteriser la fissuration d'un echantillon d'anode cuite. L'analyse surfacique et en profondeur de cet echantillon a permis de voir clairement la formation des fissures sur une grande partie de la surface analysee. L'autre partie des travaux est basee sur la caracterisation des defauts dans des echantillons d'anodes crues

Absolute number density and kinetic analysis of CF, CF{sub 2} and C{sub 2}F{sub 4} molecules in pulsed CF{sub 4}/H{sub 2} rf plasmas

Energy Technology Data Exchange (ETDEWEB)

Stepanov, Sergey

2010-04-26

Tunable Diode Laser Absorption Spectroscopy in the mid InfraRed spectral range (IR-TDLAS) has been applied to investigate the behaviour of CF, CF{sub 2} and C{sub 2}F{sub 4} species produced in pulsed CF{sub 4}/H{sub 2} capacitively coupled radio frequency plasmas (13.56 MHz CCP). This experimental technique was shown to be suitable for temporally resolved measurements of the absolute number density of the target molecules in the studied fluorocarbon discharges. The temporal resolution of about 20..40 ms typically achieved in the standard data acquisition mode (''stream mode'') was sufficient for the real-time measurements of CF{sub 2} and C{sub 2}F{sub 4}, but not of CF whose kinetics was observed to be much faster. Therefore, a more sophisticated approach (''burst mode'') providing a temporal resolution of 0.94 ms was established and successfully applied to CF density measurements. In order to enable the TDLAS measurements of the target species, preliminary investigations on their spectroscopic data had been carried out. In particular, pure C{sub 2}F{sub 4} has been produced in laboratory by means of vacuum thermal decomposition (pyrolysis) of polytetrafluoroethylene and used as a reference gas. Therefore, an absorption structure consisting of several overlapping C{sub 2}F{sub 4} lines around 1337.11 cm{sup -1} was selected and carefully calibrated, which provided the first absolute measurements of the species by means of the applied experimental technique. The absolute number density traces measured for CF, CF{sub 2} and C{sub 2}F{sub 4} in the studied pulsed plasmas were then analysed, in which two differential balance equations were proposed for each of the species to describe their behaviour during both ''plasma on'' and ''plasma off'' phases. Analytical solutions of the balance equations were used to fit the experimental data and hence to deduce important information on the

Absolute number density and kinetic analysis of CF, CF{sub 2} and C{sub 2}F{sub 4} molecules in pulsed CF{sub 4}/H{sub 2} rf plasmas

Energy Technology Data Exchange (ETDEWEB)

Stepanov, Sergey

2010-04-26

Tunable Diode Laser Absorption Spectroscopy in the mid InfraRed spectral range (IR-TDLAS) has been applied to investigate the behaviour of CF, CF{sub 2} and C{sub 2}F{sub 4} species produced in pulsed CF{sub 4}/H{sub 2} capacitively coupled radio frequency plasmas (13.56 MHz CCP). This experimental technique was shown to be suitable for temporally resolved measurements of the absolute number density of the target molecules in the studied fluorocarbon discharges. The temporal resolution of about 20..40 ms typically achieved in the standard data acquisition mode (''stream mode'') was sufficient for the real-time measurements of CF{sub 2} and C{sub 2}F{sub 4}, but not of CF whose kinetics was observed to be much faster. Therefore, a more sophisticated approach (''burst mode'') providing a temporal resolution of 0.94 ms was established and successfully applied to CF density measurements. In order to enable the TDLAS measurements of the target species, preliminary investigations on their spectroscopic data had been carried out. In particular, pure C{sub 2}F{sub 4} has been produced in laboratory by means of vacuum thermal decomposition (pyrolysis) of polytetrafluoroethylene and used as a reference gas. Therefore, an absorption structure consisting of several overlapping C{sub 2}F{sub 4} lines around 1337.11 cm{sup -1} was selected and carefully calibrated, which provided the first absolute measurements of the species by means of the applied experimental technique. The absolute number density traces measured for CF, CF{sub 2} and C{sub 2}F{sub 4} in the studied pulsed plasmas were then analysed, in which two differential balance equations were proposed for each of the species to describe their behaviour during both ''plasma on'' and ''plasma off'' phases. Analytical solutions of the balance equations were used to fit the experimental data and hence to deduce important information on the kinetics of the studied molecules. In particular, during the ''plasma off'' phase

A data model of the Climate and Forecast metadata conventions (CF-1.6 with a software implementation (cf-python v2.1

Directory of Open Access Journals (Sweden)

D. Hassell

2017-12-01

Full Text Available The CF (Climate and Forecast metadata conventions are designed to promote the creation, processing, and sharing of climate and forecasting data using Network Common Data Form (netCDF files and libraries. The CF conventions provide a description of the physical meaning of data and of their spatial and temporal properties, but they depend on the netCDF file encoding which can currently only be fully understood and interpreted by someone familiar with the rules and relationships specified in the conventions documentation. To aid in development of CF-compliant software and to capture with a minimal set of elements all of the information contained in the CF conventions, we propose a formal data model for CF which is independent of netCDF and describes all possible CF-compliant data. Because such data will often be analysed and visualised using software based on other data models, we compare our CF data model with the ISO 19123 coverage model, the Open Geospatial Consortium CF netCDF standard, and the Unidata Common Data Model. To demonstrate that this CF data model can in fact be implemented, we present cf-python, a Python software library that conforms to the model and can manipulate any CF-compliant dataset.

Can earthquake fissures predispose hillslopes to landslides? - Evidence from Central and East Asia

Science.gov (United States)

Sidle, Roy C.; Gomi, Takashi; Rajapbaev, Muslim; Chyngozhoev, Nurstan

2017-04-01

Factors affecting earthquake-initiated landslides include earthquake magnitude, focal depth, and seismic wave propagation and attenuation. In contrast to rainfall-initiated landslides, earthquake-induced landslides often occur on convex slopes and near ridgelines. Here we present evidence from Fergana Basin, Kyrgyzstan and Kumamoto, Japan on how fissures developed during earthquakes may promote subsequent initiation of rainfall-triggered landslides. More than 1800 recent major landslides in hilly terrain and soft sediments of the Fergana Basin have been largely attributed to accumulation of heavy rainfall and snowmelt. While no large earthquakes have occurred in the Fergana Basin, smaller earthquakes have generated fissures near ridgelines and on convex slopes. The connection of fissures, developed years or decades before slope failure, with preferential transport of rainwater and runoff into the soil has not been previously investigated. Fissures have been observed to expand with time, particularly during subsequent minor earthquakes, further promoting preferential infiltration. Because the soil mantle does not have large contrasts in permeability that would define a slip plane for landslides, it appears that the position and depth of these fissures may control the location and depth of failures. Zones in the soil where surficial inputs of water are preferentially transported, augment natural subsurface accumulation of antecedent rainfall. Many landslides in the eastern Fergana Basin occur after several months of accumulated precipitation and groundwater has been observed emerging on critical hillside locations (near ridgelines and on convex slopes) prior to slope failure. During the 2016 Kumamoto Earthquake (M 7.3), many landslides were triggered in forest and grassland hillslopes near Mount Aso. All of these earthquakes were shallow (focal depths about 10 km), causing high shaking intensity and ground rupturing. Because soils were relatively dry during these

Reconstitution of CF1-depleted thylakoid membranes with complete and fragmented chloroplast ATPase. The role of the delta subunit for proton conduction through CF0

NARCIS (Netherlands)

Engelbrecht, Siegfried; Lill, H; Junge, Wolfgang

1986-01-01

Chloroplast ATPase (CF1) was isolated from spinach, pea and maize thylakoids by EDTA extraction followed by anion-exchange chromatography. CF1 was purified and resolved by HPLC into integral CF1, and CF1 lacking the delta & epsilon subunits: CF1(-delta) and CF1(-epsilon). Washing Mono-Q-bound CF1

The effect of different enamel surface treatments on microleakage of fissure sealants

Directory of Open Access Journals (Sweden)

Asli Topaloglu-Ak

2013-11-01

Full Text Available Objective. The aim of this study was to evaluate the effects of different techniques of surface treatment on the microleakage of fissure sealants in permanent molar teeth in vitro. Materials and methods. 96 extracted impacted human third molars were randomly divided into 8 surface treatment groups (n=12/group as 1. Er: YAG laser; (Fidelis II, Fotona, Ljubljana, Slovenia (125 mj, 20Hz. 2. Er: YAG laser + 37% H3PO4 (15s; 3. ER: AG laser + 37% H3PO4+Prime&Bond NT; 4. Er: YAG laser + G Bond; 5. Er: YAG laser + Prime&Bond NT; 6. 37% H3PO4; 7. 37% H3PO4 + Prime &Bond NT; 8. G Bond. Sealant material (Clinpro, 3M ESPE, Seefeld, Germany, was applied into the fissures and light-cured for 20s with LED (Bluephase C5, Ivoclar-Vivadent, Schaan, Liechtenstein. Specimens were subjected to thermocycling (1000×, 5-55°C, dwell time: 15s and immersed in 0.5% basic fuchsin solution for 24h at 37°C. The samples were sectioned and scored on a 3 point rating scale using a light microscope with a magnification of ×20. One-way analysis of variance was used to analyze data. Multiple comparisons were analyzed using Bonferroni test (p=0.05. Results. Er:YAG laser showed the highest microleakage scores whereas Er YAG laser + 37% H3PO4 showed the lowest. Although 37% H3PO4 group showed higher scores than Er:YAG laser + 37% H3PO4, the difference was not statistically significant. Conclusion. Etching fissures with phosphoric acid is sufficient prior to fissure sealant application.

The Lobe Fissure Tracking by the Modified Ant Colony Optimization Framework in CT Images

Directory of Open Access Journals (Sweden)

Chii-Jen Chen

2014-11-01

Full Text Available Chest computed tomography (CT is the most commonly used technique for the inspection of lung lesions. However, the lobe fissures in lung CT is still difficult to observe owing to its imaging structure. Therefore, in this paper, we aimed to develop an efficient tracking framework to extract the lobe fissures by the proposed modified ant colony optimization (ACO algorithm. We used the method of increasing the consistency of pheromone on lobe fissure to improve the accuracy of path tracking. In order to validate the proposed system, we had tested our method in a database from 15 lung patients. In the experiment, the quantitative assessment shows that the proposed ACO method achieved the average F-measures of 80.9% and 82.84% in left and right lungs, respectively. The experiments indicate our method results more satisfied performance, and can help investigators detect lung lesion for further examination.

Natural Treatments for Fissure in Ano Used by Traditional Persian Scholars, Razi (Rhazes) and Ibn Sina (Avicenna).

Science.gov (United States)

Derakhshan, Ali Reza

2016-06-08

Most cases of chronic fissure do not respond to medical treatment. Razi and Ibn Sina were 2 of the best-known scientists of ancient Persia. The purpose of this study was to find out new scientific evidence in modern medicine about their recommendations, in order to find certain clues to conduct useful researches in the future. First, treatments of anal fissure mentioned by Razi and Ibn Sina were reviewed. Then, literature search was made in electronic databases including PubMed, Scopus, and Google Scholar. Management of anal fissure according to Razi's and Ibn Sina's practices is done based on 3 interventions: lifestyle modifications, drug treatments, and manual procedures. Almost all remedies suggested by Razi and Ibn Sina have shown their effects on fissure in ano via several mechanisms of action in many in vitro and in vivo studies; Still there is lack of human studies on the subject. © The Author(s) 2016.

Comparing the etiology and treatment of skin fissure in traditional and conventional medicine; a brief review

Directory of Open Access Journals (Sweden)

A. Jedkareh

2016-01-01

Full Text Available Dry skin is a common problem which affects wound healing, severity of other skin diseases and quality of life of people. One of its undesirable effects is fissure that is a cutaneous condition in which there is a linear loss of epidermis and dermis with sharply defined, nearly vertical walls. In the present study, we have investigated the etiology of the disease and its treatments in conventional medicine and Iranian Traditional Medicine (ITM. Two traditional medicine references, current scientific data bases and medicinal texts were explored with the selected keywords such as "sheqaq-e-poosti", "skin fissure" and "dry skin" to find the etiology and treatment of skin fissure. From the view point of both conventional medicine and ITM, dry skin is the cause of skin fissure and some causes of dry skin are similar. In conventional medicine, moisturizers are mainly used for treatment of dry skin; while in ITM some herbs, oils and other natural remedies have been used. A topical dosage form which was called "qeirooti", a mixture of wax and oil, was used to treat skin fissure in ITM. It comprised of oily ingredients that acted as occlusives and also some herbal components that directly improved dry skin (similar to moisturizers. Components efficacy of traditional dosage forms for treatment of dry skin lead us to study about formulation of “qeirooti” for treatment of dry skin.

Water Stream in Bidet Toilet Commode as a Cause of Anterior Anal Fissure: A Case-Control Study

Directory of Open Access Journals (Sweden)

Pankaj Garg

2017-03-01

Full Text Available Background Water used as a single sharp stream in toilet commode for post defecation cleansing is a common practice in several countries across the globe including India. Repeated hitting of the anus by water stream could potentially cause injury to the anal canal epithelium and lead to development of fissure-in-ano. As the water stream is emanating from the backside of the toilet commode, the possible injury, if any, would be on the anterior anal canal. Objectives The present study aimed at determining whether water stream usage in toilet commodes increased the incidence of anterior fissure-in-ano; this was determined by the incidence of anterior fissure-in-ano the study and control groups. Methods All consecutive fissure-in-ano patients referring to a colorectal clinic from February 2012 to 2015 were included in the study. The patients were classified as a study group (who were using water stream for cleansing purposes in toilet commodes and a control group (patients who were not using water stream. The characteristics and location (position of the fissure-in-ano was noted. Results In this study, 165 patients were prospectively enrolled. Male/female ratio was 96/69, and the mean age was 36.3 ± 11.2 years. The anterior fissure-in-ano in the study group was 55.9% (47/84, while it was 17.3 % (14/81 in the control group (P < 0.0001, odds ratio: 6.08, 95% CI: 2.96 - 12.47]. Conclusions Water used as a single sharp stream to cleanse after defecation in toilet commodes is hazardous and should be avoided.

Endobronchial valves in severe emphysematous patients: CT evaluation of lung fissures completeness, treatment radiological response and quantitative emphysema analysis

Energy Technology Data Exchange (ETDEWEB)

Koenigkam-Santos, Marcel, E-mail: marcelk46@yahoo.com.br, E-mail: marcelk46@usp.b [Universidade de Sao Paulo (HCFMRP/USP), Ribeirao Preto, SP (Brazil). Hospital das Clinicas da Faculdade de Medicina; Paula, Wagner Diniz de [University of Brasilia (UnB), DF (Brazil). Brasilia University Hospital; Gompelmann, Daniela [University of Heidelberg (Germany). Department of Pneumology and Respiratory Medicine of the Chest Clinic (Thoraxklinik); Kauczor, Hans-Ulrich [University of Heidelberg (Germany). Department of Diagnostic and Interventional Radiology; Heussel, Claus Peter; Puderbach, Michael [University of Heidelberg (Germany). Department of Diagnostic and Interventional Radiology with Nuclear Medicine of the Chest Clinic (Thoraxklinik)

2013-01-15

Objective: To evaluate lung fissures completeness, post-treatment radiological response and quantitative CT analysis (QCTA) in a population of severe emphysematous patients submitted to endobronchial valves (EBV) implantation. Materials and Methods: Multi-detectors CT exams of 29 patients were studied, using thin-section low dose protocol without contrast. Two radiologists retrospectively reviewed all images in consensus; fissures completeness was estimated in 5% increments and post-EBV radiological response (target lobe atelectasis/volume loss) was evaluated. QCTA was performed in pre and post-treatment scans using a fully automated software. Results: CT response was present in 16/29 patients. In the negative CT response group, all 13 patients presented incomplete fissures, and mean oblique fissures completeness was 72.8%, against 88.3% in the other group. QCTA most significant results showed a reduced post-treatment total lung volume (LV) (mean 542 ml), reduced EBV-submitted LV (700 ml) and reduced emphysema volume (331.4 ml) in the positive response group, which also showed improved functional tests. Conclusion: EBV benefit is most likely in patients who have complete interlobar fissures and develop lobar atelectasis. In patients with no radiological response we observed a higher prevalence of incomplete fissures and a greater degree of incompleteness. The fully automated QCTA detected the post-treatment alterations, especially in the treated lung analysis. (author)

Newborn with Prenatally Diagnosed Choroidal Fissure Cyst and Panhypopituitarism and Review of the Literature

Directory of Open Access Journals (Sweden)

Ritu Chitkara

2011-12-01

Full Text Available Little has been reported on fetal diagnosis of choroidal fissure cysts and prediction of the clinical complications that can result. We describe the case of a near-term male infant with prenatally diagnosed choroidal fissure cyst and bilateral clubfeet. His prolonged course in the neonatal intensive care nursery was marked by severe panhypopituitarism, late-onset diabetes insipidus, placement of a cystoperitoneal shunt, and episodes of sepsis. Postnatal genetic evaluation also revealed an interstitial deletion involving most of band 10q26.12 and the proximal half of band 10q26.13. The patient had multiple readmissions for medical and surgical indications and died at 6 months of age. This case represents the severe end of the spectrum of medical complications for children with choroidal fissure cysts. It highlights not only the importance of comprehensive evaluation and multidisciplinary management and counseling in such cases, but also the need for heightened vigilance in these patients.

Decomposition of Potent Greenhouse Gases SF6, CF4 and SF5CF3 by Dielectric Barrier Discharge

International Nuclear Information System (INIS)

Zhang Renxi; Wang Jingting; Cao Xu; Hou Huiqi

2016-01-01

For their distinguished global warming potential (GWP100) and long atmosphere lifespan, CF 4 , SF 6 and SF 5 CF 3 were significant in the field of greenhouse gas research. The details of discharging character and the optimal parameter were discussed by using a Dielectric Barrier Discharge (DBD) reactor to decompose these potent greenhouse gases in this work. The results showed that SF 6 could be decomposed by 92% under the conditions of 5 min resident time and 3000 V applied voltage with the partial pressure of 2.0 kPa, 28.2 kPa, and 1.8 kPa for SF 6 , air and water vapor, respectively. 0.4 kPa CF 4 could be decomposed by 98.2% for 4 min resident time with 30 kPa Ar added. The decomposition of SF 5 CF 3 was much more effective than that of SF 6 and CF 4 and moreover, 1.3 kPa SF 5 CF 3 , discharged with 30 kPa O 2 , Ar and air, could not be detected when the resident time was 80 s, 40 s, and 120 s, respectively. All the results indicated that DBD was a feasible technique for the abatement of potent greenhouse gases. (paper)

Deformation at longyao ground fissure and its surroundings, north China plain, revealed by ALOS PALSAR PS-InSAR

Science.gov (United States)

Yang, Chengsheng; Lu, Zhong; Zhang, Qin; Zhao, Chaoying; Peng, Jianbing; Ji, Lingyun

2018-05-01

The Longyao ground fissure (LGF) is the longest and most active among more than 1000 ground fissures on the North China Plain. There have been many studies on the formation mechanism of the LGF, due to its scientific importance and its potential for damage to the environment. These studies have been based on both regional tectonic analysis and numerical simulations. In order to provide a better understanding of the formation mechanism, the deformation of the crack and its surrounding environment should be taken into consideration. In this paper, PS-InSAR technology was employed to assess the ground deformation of LGF and its surrounding area, using L-band ALOS-1 PALSAR images from 2007 to 2011. The characteristics of ground deformation, relationships between fissure activity and surrounding faults and groundwater exploitation were analyzed. This study shows that the north side of Longyao fault (LF) is uplifting while the south side is subsiding. This provides the tectonic conditions responsible for the activity of the ground fissure. Local groundwater exploitation also plays an important role in the development of ground fissures. InSAR observations were modeled to infer the loading depth (-2.8 km) and the slip rate (31.1 mm/yr) of LF.

Relation between the CF2 radical and plasma density measured using LIF and cutoff probe in a CF4 inductively coupled plasma

International Nuclear Information System (INIS)

Kim, Jung-Hyung; Shin, Yong-Hyeon; Chung, Kwang-Hwa; Yoo, Yong-Shim

2004-01-01

The behavior of the CF 2 radical was studied in a CF 4 inductively coupled plasma. The CF 2 radical was measured using a laser-induced fluorescence method. Absolute electron density was measured using a cutoff probe and the electron temperature was measured using a double probe to study the relationship between these electron properties and the CF 2 radical. To examine the relationship between them, the CF 2 radical and electron density were measured as a function of the rf power, which is a major external parameter influencing the electron density. As the rf power was increased, the CF 2 radical density increased in the range of low electron density, and then decreased beyond a critical electron density. The dependence of the CF 2 radical density on the electron density was theoretically analyzed with rate equations. The theoretical result was in good agreement with experiment

Analysis of some laboratory tracer runs in natural fissures

International Nuclear Information System (INIS)

Moreno, L.; Neretnieks, I.

1984-01-01

Tracer tests in natural fissures performed in the laboratory are analysed by means of fitting two different models. In the experiments, sorbing and non-sorbing tracers were injected into a natural fissure running parallel to the axis of a drill core. The models take into account advection, diffusion into the rock matrix, sorption onto the rock surface and dispersion. For the last mechanism, one of the models considers hydrodynamic dispersion while the other model assumes channeling dispersion. The models take into account time delays in the inlet and outlet channels. The dispersion characteristics and water residence time were determined from the experiments with non-sorbing tracers. Surface and volume sorption coefficients and data on diffusion into the rock matrix were determined for the sorbing tracers. The results are compared with values independently determined in the laboratory. Good agreement was obtained using either model. When these models are used for prediction of tracer transport over larger distances, the results will depend on the model. The model with channeling dispersion will show a greater dispersion than the model with hydrodynamic dispersion. (author)

Preconsolidation of Søvind Marl - a highly fissured Eocene clay

DEFF Research Database (Denmark)

Grønbech, Gitte Lyng; Ibsen, Lars Bo; Nielsen, Benjaminn Nordahl

2015-01-01

Determination of the preconsolidation stresses is a key tool in geotechnical engineering used to evaluate and estimate the behavior of soils. However, it has been proven difficult to accurately estimate the preconsolidation in highly fissured overconsolidated clays, due to the effect of the fissu...

Atmospheric chemistry of (CF3)2CFOCH3

DEFF Research Database (Denmark)

Andersen, Lene Løffler; Østerstrøm, Freja From; Nielsen, Ole John

2014-01-01

FTIR smog chamber techniques were used to measure k(Cl + (CF 3)2CFOCH3) = (1.80 ± 0.42) × 10-13, k(Cl + (CF3)2CFOCHO) = (1.47 ± 0.56) × 10-14, and k(OH + (CF3) 2CFOCH3) = (1.55 ± 0.24) × 10-14 cm3 molecule-1 s-1. The chlorine-atom initiated oxidation of (CF3)2CFOCH3 in air in the absence of NOX r...

Clinical effectiveness and cost-effectiveness of fissure sealants in children and adolescents with a high caries risk

Directory of Open Access Journals (Sweden)

Neusser, Silke

2014-10-01

Full Text Available [english] In Germany, the application of resin-based pits and fissures sealants on the occlusal surfaces of permanent molars is part of individual prophylaxis for children and adolescents between six and 18 years. The individual prophylaxis is covered by the Statutory Health Insurance since 1993.The report addresses questions on medical effectiveness, cost-effectiveness, as well as ethical, social, and legal implications of pit and fissure sealants in preventing dental caries for children and adolescents at high caries risk. The results of the studies indicate a protective effect of pit and fissure sealants, particularly for children and adolescents at high caries risk. Additionally, the economic evaluation suggests a tendency for cost savings in this group. Nevertheless, a general expansion of the intervention cannot be recommended. All studies show a risk of bias in favour of pit and fissure sealing and a limited transferability to the German health care system. Studies included in the economic evaluation revealed methodological flaws. Both the economic models and primary studies do not provide reliable results.

King's Bowl Pit Crater, Lava Field and Eruptive Fissure, Idaho - A Multipurpose Volcanic Planetary Analog

Science.gov (United States)

Hughes, S. S.; Garry, B.; Kobs-Nawotniak, S. E.; Sears, D. W. G.; Borg, C.; Elphic, R. C.; Haberle, C. W.; Kobayashi, L.; Lim, D. S. S.; Sears, H.; Skok, J. R.; Heldmann, J. L.

2014-12-01

King's Bowl (KB) and its associated eruptive fissure and lava field on the eastern Snake River Plain, is being investigated by the NASA SSERVI FINESSE (Field Investigations to Enable Solar System Science and Exploration) team as a planetary analog to similar pits on the Moon, Mars and Vesta. The 2,220 ± 100 BP basaltic eruption in Craters of the Moon National Monument and Preserve represents early stages of low shield growth, which was aborted when magma supply was cut off. Compared to mature shields, KB is miniscule, with ~0.02 km3 of lava over ~3 km2, yet the ~6 km long series of fissures, cracks and pits are well-preserved for analog studies of volcanic processes. The termination of eruption was likely related to proximity of the 2,270 ± 50 BP eruption of the much larger Wapi lava field (~5.5 km3 over 325 km2 area) on the same rift. Our investigation extends early work by R. Greeley and colleagues, focusing on imagery, compositional variations, ejecta distribution, dGPS profiles and LiDAR scans of features related to: (1) fissure eruptions - spatter ramparts, cones, feeder dikes, extension cracks; (2) lava lake formation - surface morphology, squeeze-ups, slab pahoehoe lava mounds, lava drain-back, flow lobe overlaps; and (3) phreatic steam blasts - explosion pits, ejecta blankets of ash and blocks. Preliminary results indicate multiple fissure eruptions and growth of a basin-filled lava lake up to ~ 10 m thick with outflow sheet lava flows. Remnant mounds of original lake crust reveal an early high lava lake level, which subsided as much as 5 m as the molten interior drained back into the fissure system. Rapid loss of magma supply led to the collapse of fissure walls allowing groundwater influx that triggered multiple steam blasts along at least 500 m. Early blasts occurred while lake magma pressure was still high enough to produce squeeze-ups when penetrated by ejecta blocks. The King's Bowl pit crater exemplifies processes of a small, but highly energetic

Identification of distinct specificity determinants in resistance protein Cf-4 allows construction of a Cf-9 mutant that confers recognition of avirulence protein AVR4

NARCIS (Netherlands)

Hoorn, Van der R.A.L.; Roth, R.; Wit, De P.J.G.M.

2001-01-01

The tomato resistance genes Cf-4 and Cf-9 confer specific, hypersensitive response-associated recognition of Cladosporium carrying the avirulence genes Avr4 and Avr9, respectively. Cf-4 and Cf-9 encode type I transmembrane proteins with extracellular leucine-rich repeats (LRRs). Compared with Cf-9,

Novel QTLs affecting rice kernel fissure resistance discovered in the cultivar ‘Saber’ augment those from ‘Cybonnet’

Science.gov (United States)

Kernel fissures in rice (Oryza sativa L.) caused by pre- or post-harvest stresses are the leading cause of breakage among milled rice. Such breakage causes economic losses for producers, millers, and marketers. Five QTLs for kernel fissure resistance (FR) were identified among a set of 275 RILs de...

Comparison of botox and lateral internal sphincterotomy treatment outcomes in chronic anal fissures

Directory of Open Access Journals (Sweden)

Tolga Dinç

2014-03-01

Full Text Available Objective: Both botox and lateral internal sfinkterotomi are treatment technics used in chronic anal fissure; provide the relaxation of anal sphincter and as a result of this, healing occurs. Aim of this study is to compare efficacy of botox and LIS treatment in chronic anal fissure and discussing with the literature. Methods: 60 of 66 patients who has chronic anal fissure, that we reached, treated but not healed with medical therapy, appealed to the Dr. Sami Ulus Hospital included the study. Gender, age, fissure localization, complaints (pain, bleeding, itching, constipation, complaint length, recurrences after treatment, continence conditions and complications of patients were registered. Results: Sixty patients were enrolled the study. Of the 60 patients; 38(63.3% were male and 22 (27.7% were female. Mean age of all patients was 35.93 ± 11.45 (21 -60. Pain was the common complaint of the all patients. 10 (32.3% recurrence were detected in botox treatment group (Group-I, only 1 (3.4% recurrence was in LIS group (Group-II. There was no complication as an incontinence in group-I but 3 cases with incontinence (10.39% were obtained in group-II. In the evaluation of these 3 cases by Cleveland Clinic Continence Scoring System, 2 cases classified as gas incontinence and 1 case as moderate fecal incontinence. Conclusion: Although botulinum toxin injection seen as an alternative treatment method with low complication rates such as incontinence, high recurrence is an important shortcoming of this technic. LIS performed by experienced surgeons remained the most popular treatment modality with low complication rates and great deal of healing success.

Landslide Fissure Inference Assessment by ANFIS and Logistic Regression Using UAS-Based Photogrammetry

Directory of Open Access Journals (Sweden)

Ozgun Akcay

2015-10-01

Full Text Available Unmanned Aerial Systems (UAS are now capable of gathering high-resolution data, therefore, landslides can be explored in detail at larger scales. In this research, 132 aerial photographs were captured, and 85,456 features were detected and matched automatically using UAS photogrammetry. The root mean square (RMS values of the image coordinates of the Ground Control Points (GPCs varied from 0.521 to 2.293 pixels, whereas maximum RMS values of automatically matched features was calculated as 2.921 pixels. Using the 3D point cloud, which was acquired by aerial photogrammetry, the raster datasets of the aspect, slope, and maximally stable extremal regions (MSER detecting visual uniformity, were defined as three variables, in order to reason fissure structures on the landslide surface. In this research, an Adaptive Neuro Fuzzy Inference System (ANFIS and a Logistic Regression (LR were implemented using training datasets to infer fissure data appropriately. The accuracy of the predictive models was evaluated by drawing receiver operating characteristic (ROC curves and by calculating the area under the ROC curve (AUC. The experiments exposed that high-resolution imagery is an indispensable data source to model and validate landslide fissures appropriately.

Modeling of silicon etching in CF sub 4 /O sub 2 and CF sub 4 /H sub 2 plasmas

Energy Technology Data Exchange (ETDEWEB)

Trachtenberg, I.; Edgar, T.F. (Dept. of Chemical Engineering, Univ. of Texas at Austin, Austin, TX (US)); Venkatesan, S.P. (Morgantown Energy Technology Center, Morgantown, WV (US))

1990-07-01

A one-dimensional radial flow reactor model that includes fairly detailed free radical gas-phase chemistry has been developed for the etching of silicon in CF{sub 4}/O{sub 2} and CF{sub 4}/H{sub 2} plasmas. Attention has been restricted to transport and reaction of neutral species. The model equations were solved by orthogonal collocation. The sensitivities of the model predictions to flow rate, inlet gas composition, electron density, silicon loading, and other factors have been examined. The major loss path for fluorine atoms is different in CF{sub 4}/O{sub 2} and CF{sub 4}/H{sub 2} systems, and this results in significant qualitative differences in the parametric sensitivities of the two systems.

The movement of solutes through aqueous fissures in micro-porous rock during borehole experiments

International Nuclear Information System (INIS)

Glueckauf, E.

1981-02-01

When a tracer is injected for a short period into a solution flowing through a fissure in micro-porous rock, that tracer is not only carried along by the aqueous stream, but its local concentration is also markedly affected by hydro-dynamic dispersion and by sideway diffusion and adsorption in the micro-porous rock. The process has been simulated by computer calculations and these have made it possible to obtain from the concentration-time curves observed in borehole experiments an assessment of the physical parameters involving the water velocity and the hydro-dynamic dispersion in the fissure, and the diffusion and adsorption in the micro-porous rock. With these parameters it was then possible to recalculate quantitatively the local concentration-time history. However, in actual borehole experiments, the velocity of the water stream in the fissure is not known, and numerous side effects can distort the shape of the observed tracer curves. In order to test the theoretical interpretation more thoroughly, it is therefore proposed to carry out a laboratory experiment which simulates the borehole test under strictly defined conditions. (author)

Fissuring-chemical damaging on transfers in concrete

International Nuclear Information System (INIS)

Tognazzi, C.

1998-01-01

Concrete is a material often use in the nuclear wastes disposal. The safety analysis of a long time wastes disposal with concrete requires to verify the concrete behaviour in water. As concretes generally have cracks, it is necessary to study the crack propagation influence on chemical degradation. In this paper, the author presents diffusion tests on fissured and/or chemical aged cement. The chemical degradation of the material leads to a supplementary porosity by the hydrates decalcification and increases its diffusivity. The cracking impact is less important and can be experimentally concealed. (A.L.B.)

Modeling and numerical study of transfers in fissured environments; Modelisation et etude numerique des transferts en milieux fissures

Energy Technology Data Exchange (ETDEWEB)

Granet, S.

2000-01-28

Oil recovery from fractured reservoirs plays a very important role in the petroleum industry. Some of the world most productive oil fields are located in naturally fractured reservoirs. Modelling flow in such a fracture network is a very complex problem. This is conventionally done using a specific idealized model. This model is based on the Warren and Root representation and on a dual porosity, dual permeability approach. A simplified formulation of matrix-fracture fluid transfers uses a pseudo-steady-state transfer equation involving a constant exchange coefficient. Such a choice is one of the main difficulties of this approach. To get a better understanding of the simplifications involved in the dual porosity approach a reference model must be available. To obtain such a fine description, we have developed a new methodology. This technique called 'the fissure element methodology' is based on a specific gridding of the fractured medium. The fissure network is gridded with linear elements coupled with an unstructured triangular grid of matrix. An appropriate finite volume scheme has been developed to provide a good description of the flow. The numerical development of is precisely described. A simulator has been developed using this method. Several simulations have been realised. Comparisons have been done with different dual-porosity dual-permeability models. A reflexion concerning the choice of the exchange coefficient used in the dual porosity model is then proposed. This new tool has permit to have a better understanding of the production mechanisms of a complex fractured reservoir. (author)

CF Mutation Panel

Science.gov (United States)

... exocrine.html. UPCMD (1998 – 2002). Cystic Fibrosis. University Pathology Consortium, LLC [On-line information]. Available online at http://www.upcmd.com/dot/examples/00218/description.html. Sainato, D., (2002, March). Genetic Testing for CF Going Mainstream? Clinical Laboratory ...

Effects of menthol essence and breast milk on the improvement of nipple fissures in breastfeeding women

Directory of Open Access Journals (Sweden)

Sedigheh Amir Ali Akbari

2014-01-01

Full Text Available Background: Nipple fissure is a common disorder during breastfeeding. With high prevalence of nipple fissures and its impacts on breastfeeding, as well as the existence of evidence in favor of the application of peppermint as an antiinflammatory and antiinfection herb, the purpose of this study is to determine the effect of Menthol essence on improving nipple fissures in the primiparous breastfeeding women. Materials and Methods: This study was conducted using a clinical trial method. Samples were divided randomly into two groups of 55 women. The women in the peppermint group applied four drops of Menthol essence on their nipple and areola after each feeding. The control group applied four drops of their own milk on the nipple and areola after each feeding. Then, the two groups were studied on days 10 and 14 postpartum. For intensity of pain, the visual analog scale (0-10 cm and to measure the severity of damage, Amir scale (1-10 cm were applied and the existence or lack of nipple discharge was also recorded. The data were analyzed using SPSS 17 software. Results: The mean intensity of pain and nipple fissure before treatment (8.55 ± 1.74 and day 10 after delivery (4.26 ± 1.57 and before treatment and day 14 after delivery in the case group (1.32 ± 1.02 had a significant difference (P < 0.001. Nipple discharge between the two groups, before treatment (%75.2 and day 10 after delivery (%31.6 and before treatment and day 14 after delivery (%15.7, the case group had a significant difference (P < 0.001. Conclusion: Menthol essence can improve nipple fissures in the primiparous breastfeeding women.

Short linear shadows connecting pulmonary segmental arteries to oblique fissures in volumetric thin-section CT images: comparing CT, micro-CT and histopathology

International Nuclear Information System (INIS)

Guan, Chun-Shuang; Ma, Da-Qing; Chen, Jiang-Hong; Chen, Bu-Dong; Cui, Dun; Zhang, Yan-Song; Liu, Wei-Hua

2016-01-01

To retrospectively evaluate short linear shadows connecting pulmonary segmental arteries to oblique fissures in thin-section CT images and determine their anatomical basis. CT scanning was performed on 108 patients and 11 lung specimens with no lung diseases around the oblique fissures or hilar. Two radiologists evaluated the imaging. The parameters included length, thickness of short linear shadows, pulmonary segmental artery variations, and traction interlobar fissures, etc. The short linear shadows were not related to sex, age, or smoking history. The lengths of the short linear shadows were generally within 10 mm. The thicknesses of the short linear shadows ranged from 1 to 2 mm. Of the patients, 26.9 % showed pulmonary segmental artery variations; 66.7 % of short linear shadows pulled oblique fissures. In three-dimensional images, the short linear shadows appeared as arc planes, with one side edge connected to the oblique fissure, one side edge connected to a pulmonary segmental artery. On the tissue slices, the short linear shadow exhibited a band structure composed of connective tissues, small blood vessels, and small lymphatic vessels. Short linear shadows are a type of normal intrapulmonary membranes and can maintain the integrity of the oblique fissures and hilar structure. (orig.)

Application of passive type radon detectors to find fissures in banks caused by the southern Hyogo prefectural earthquake in Japan

International Nuclear Information System (INIS)

Saegusa, J.; Yamasaki, K.; Tsujimoto, T.; Morishima, H.; Shimo, M.; Murakami, A.; Hasegawa, T.

1996-01-01

Innumerable fissures were formed widely in Hanshin area in Japan by the former southern Hyogo prefectural earthquake occurred on Jan.17, 1995. In this study, as a preliminary investigation, we applied passive type radon detector Pico-Rad (U.S. Packard Instrument Co. Ltd.) with hemispheric plastic cover over them around the fissure along on the bank of two reservoirs to examine whether there is possibility to find fissures using the characteristics of 222 Rn migration. One of the reservoir, Taniyamakami-ike, is located at the north of the Awaji-shima island at a distance of about 4 km from the seismic center of this earthquake. On the whole, 222 Rn exhalation rates were high on a line of 2 m below the edge of the bank and got lower in proportion to the distance from this line. Those top of the bank had middle values among the lines. The mean 222 Rn exhalation rate was 4.7 mBq m -2 s -1 , and in these data we found some singularly high 222 Rn points. The other reservoir named Hosho-ike is located at northwestern Nagaokakyo city of Kyoto prefecture and the Komyoji active faulting runs from north to south parallel with the bank about 120 m to the west. In this bank, a fissure about 50 m in length and 0.1 m in width was taken shape. 222 Rn exhalation rates were relatively high on the top of the bank compared with on the slope of the bank. The mean 222 Rn exhalation rate of 5 points which were measured on the fissure was 16 mBq m -2 s -1 , and that which were measured on about 1 m to the east from the fissure was 4.9 mBq m -2 s -1 and in case about 1 m to the west was 4.2 mBq m -2 s -1 . From these results we concluded that there is a possibility to find fissures inside the bank using the characteristics of 222 Rn migration. Our future objective is to find fissures inside banks non-destructively. (author)

Sealing effectiveness of fissure sealant bonded with universal adhesive systems on saliva-contaminated and noncontaminated enamel.

Science.gov (United States)

Memarpour, Mahtab; Shafiei, Fereshteh; Zarean, Mehran; Razmjoei, Faranak

2018-01-01

The effectiveness of sealants is dependent upon their adhesion to enamel surface. The aim of the study was to evaluate the sealing ability of a pit and fissure sealant used with a universal adhesive (etch-and-rinse vs. self-etch modes) when the site is contaminated with saliva. Adhesive properties were evaluated as microleakage and scanning electron microscopic (SEM) characteristics. A total of 72 mandibular third molars were randomly divided into 6 groups (n=12). Occlusal pits and fissures were sealed with an unfilled resin fissure sealant (FS) material with or without saliva contamination. The groups included: 1) phosphoric acid etching + FS (control), 2) phosphoric acid etching + Scotchbond Universal (etch-and-rinse) + FS, 3) phosphoric acid etching + saliva + Scotchbond Universal (etch-and-rinse) + FS, 4) Scotchbond Universal (self-etching) + FS,5) Scotchbond Universal (self-etching) + saliva + FS, and 6) Scotchbond Universal (self-etching) + saliva + Scotchbond Universal + FS. After thermocycling, the teeth were placed in 0.5% fuchsin, sectioned, and evaluated by digital microscopy. Two samples from each group were also observed by SEM. The data were analyzed with Kruskal-Wallis and Mann-Whitney tests for a significance of p universal adhesive in etch-and-rinse or self-etch modes was similar to that of conventional acid etching. Saliva contamination had a negative effect on sealant adhesion to pretreated enamel. Key words: Pit and fissure sealant, Universal adhesive, Saliva.

Chemical consequences of radioactive decay. 1. Study of 249Cf ingrowth into crystalline 249BkBr3: a new crystalline phase of CfBr3

International Nuclear Information System (INIS)

Young, J.P.; Haire, R.G.; Peterson, J.R.; Ensor, D.D.; Fellows, R.L.

1980-01-01

Spectrophotometric and x-ray powder diffraction methods have been applied to a study of the ingrowth of californium-249 by β - decay of berkelium-249 in crystalline 249 BkBr 3 . It was found that the Cf daughter grows in with the same oxidation state and crystal structure as the parent. Thus, six-coordinate BkBr 3 (AlCl 3 -type monoclinic structure) generates six-coordinate CfBr 3 , and eight-coordinate BkBr 3 (PuBr 3 -type orthorhombic structure) generates eight-coordinate CfBr 3 , a previously unknown form of CfBr 3 . It was also found that the daughter Cf(III) in the BkBr 3 parent compound can be reduced to Cf(II) by treatment with H 2 , as it can in pure CfBr 3 . 5 figures

The differences of saliva pH before and after application of Bis-GMA resin based-pit and fissure sealant

Directory of Open Access Journals (Sweden)

Ayub Irmadani Anwar

2016-06-01

Full Text Available Pit and fissure sealant applications is one way to prevent caries. One of the effective ingredient as a pit and fissure sealant is a Bis-GMA resin. One of the active components  of  Bis-GMA  resin  is  sodium  fluoride,  which is capable  of releasing fluoride ions to the tooth surface and able to improve the repair and remineralization process through the replacement  of  calcium and phosphate ions found in saliva to increase the pH of saliva. This study was to determine the effect of pit and fissure sealant applications made from Bis-GMA resin to pH of saliva in children aged 6-12 years. The study design is pre and post test with control group design. Saliva samples were derived from 15 pediatric patients has met the criteria. The pH of saliva were taken before and after the application of pit and fissure sealant made from Bis-GMA and measured with pH meter. This study used a non-parametric test, the Wilcoxon Signed Rank test. The results of this study are also supported by the results of statistical tests showed p-: 0.005 (p<0.05 value, which means that there are significant differences in pH of saliva before and after the application of pit and fissure sealant made from Bis-GMA resin.

Migration of radionuclides in fissured rock - The influence of micropore diffusion and longitudinal dispersion

International Nuclear Information System (INIS)

Rasmuson, A.; Neretnieks, I.

1979-12-01

The migration of radionuclides in the fissures in the bedrock surrounding a repository is discussed. A one-dimensional transport model is presented. It includes diffusion of the nuclides into the microfissures of the rock, and linear sorption and longitudinal dispersion in the bedrock. An analytical solution to the model is given in terms of an infinite integral. The integrand is a sometimes highly oscillatory function of the system parameters. A special integration method is developed to evaluate the infinite integral. The method utilizes the oscillatory behavior of the integrand. The assessment of input parameters is discussed in some detail. Dimensionless breakthrough curves are given for the approximate range of variation of the input parameters. Calculations are made for a repository of spent fuel surrounded by fissured but fairly good rock (K(sub)p=10- 9 m/s and fissure spacing S=50 m). Longitudinal dispersion may significantly affect the amount of radioactive material reaching the biosphere. Radionuclides, which would decay completely without longitudinal dispersion, may arrive in non-negligible concentrations. Dispersion effects of the magnitude considered in this study can significantly diminish the retardation effects of matrix diffusion. (authors)

Migration of radionuclides in fissured rock: The influence of micropore diffusion and longitudinal dispersion

International Nuclear Information System (INIS)

Rasmuson, A.; Neretnieks, I.

1981-01-01

The migration of radionuclides in the fissures in the bedrock surrounding a repository is discussed. A one-dimensional transport model is presented. It includes diffusion of the nuclides into the microfissures of the rock, and linear sorption, and longitudinal dispersion in the bedrock. An analytical solution to the model is given in terms of an infinite integral. The integrand is a sometimes highly oscillatory function of the system parameters. A special integration method is developed to evaluate the infinite integral. The method utilizes the oscillatory behavior of the integrand. The assessment of input parameters is discussed in some detail. Dimensionless breakthrough curves are given for the approximate range of variation of the input parameters. Calculations are made for a repository of spent fuel surrounded by fissured but fairly good rock (K/sub p/ = 10 -9 m/s and fissure spacing S = 50 m). Longitudinal dispersion may significantly affect the amount of radioactive material reaching the biosphere. Radionuclides, which would decay completely without longitudinal dispersion, may arrive in nonnegligible concentrations. Dispersion effects of the magnitude considered in this study can significantly diminish the retardation effects of matrix diffusion

Causes of the fissure formation with shrinkage of metal on low carbon steel slabs

International Nuclear Information System (INIS)

Ksenzuk, F.A.; Khudas, A.L.; Zelenskaya, D.P.

1977-01-01

The causes have been investigated underlying the formation of fissures with spread of metal on low-carbon steel slabs during hot rolling. Metallographic investigations of templates from various sections of work pieces from 15-ton ingots of 08 ps (kp) steels have indicated that the fissures on the slabs are formed after the metal spreads along the small plane and the work piece thins out in the course of rolling because of the opening of large thin-walled honeycomb bubbles. The phenomenon was confirmed schematically on a model in the form of a slab-shaped lead specimen with longitudinal hole of a variable diameter close to one of the edges

Matrix photoionization and radiolysis of the fluorobromomethanes. Infrared spectra and photochemistry of CFBr2+, CF2Br+, CF3+, and the parent cations

International Nuclear Information System (INIS)

Prochaska, F.T.; Andrews, L.

1978-01-01

The molecules CFBr 3 , CF 2 Br 2 , CF 3 Br, and C-13 enriched CF 3 Br have been subjected to matrix radiolysis and argon resonance photoionization during condensation with excess argon at 15 K. Infrared spectra showed stable and free radical products and new absorptions due to charged species. The molecular ion bands exhibited different behavior on filtered high-pressure mercury arc photolysis. Absorptions reduced by 220 to 1000-nm light are assigned to CFBr 2 + , CF 2 Br + , and CF 3 + ; other bands destroyed by photolysis are assigned to the parent cations. Li and Na atom reactions with the fluorobromomethane molecules confirmed the identification of the CFBr 2 and CF 2 Br free radicals. Other product bands destroyed by mercury arc light, some of which were generated upon photolysis of the sodium-fluorobromomethane samples, are assigned to molecular anions. 5 figures, 6 tables

Fissured and geographic tongue in Williams-Beuren syndrome

Directory of Open Access Journals (Sweden)

Neeta Sharma

2014-01-01

Full Text Available Williams-Beuren Syndrome (WBS is a rare, most often sporadic, genetic disease caused by a chromosomal microdeletion at locus 7q11.23 involving 28 genes. It is characterized by congenital heart defects, neonatal hypercalcemia, skeletal and renal abnormalities, cognitive disorder, social personality disorder, and dysmorphic facies. A number of clinical findings has been reported, but none of the studies evaluated this syndrome considering oral cavity. We here report a fissured and geographic tongue in association with WBS.

Fine mapping and introgressing qFIS1-2, a major QTL for kernel fissure resistance in rice (Oryza sativa L.)

Science.gov (United States)

Rice (Oryza sativa L.) kernel fissuring increases breakage during milling and decreases the value of processed rice. This study employed molecular gene tagging methods to fine-map a fissure resistance (FR) locus in ‘Cybonnet’, a semidwarf tropical japonica cultivar, as well as transfer this trait to...

Californium oxygen system for 1.50 < O/Cf < 1.72

International Nuclear Information System (INIS)

Turcotte, R.P.; Haire, R.G.

1975-01-01

The californium-oxygen system was studied as a function of temperature, oxygen pressure, and stoichiometry by manometric and x-ray diffraction methods. The results establish rhombohedral Cf 7 O 12 as the stable compound obtained by heating Cf 2 O 3 in air. The isobaric oxidation-reduction cycles Cf 2 O 3 → Cf 7 O 12 → Cf 2 O 3 , observed in constant rate of heating (cooling) experiments, occur with large hysteresis. A close parallel to other fluorite related lanthanide and actinide oxide systems is established. (auth)

Effect of Intermittent Drying Conditions on Fissuring Percentage and Process Duration of Long and Medium Rough Rice Varieties

Directory of Open Access Journals (Sweden)

A. Ghasemi

2016-02-01

Full Text Available One of the factors which affect the quality of rice during milling is internal fissures created during and after drying operation. In many industrial countries intermittent drying method is hired to reduce the moisture content of rough rice in order to reduce the drying time and maintain the quality of the final product. A high percentage of rice breakage during milling process, at least in Iran, necessitates performing the intermittent drying process and optimize it for Iranian varieties. In this study, the effect of this method (drying-tempering and continuous drying method (no tempering on fissuring percentage of Hashemi (long grain and Koohsar (medium grain varieties was investigated. The experiments were carried out at constant drying and tempering temperature of 60 °C, drying durations of 20, 40 and 60 min, and tempering durations of 0 (continuous drying, 40, 80, 120, 160, 200, 240 min. The results revealed that the tempering process significantly reduced the drying time and fissured kernels percentage. Moreover, for both varieties it was observed that the rice fissuring decreased significantly by continuing the tempering process until certain durations. Overall, for optimization of intermittent drying process in terms of the considered qualitative parameters, i.e. reducing energy consumption and losses, conducting 160 and 200 min tempering process after 40 min drying was found appropriate for Hashemi and Koohsar varieties, respectively. In addition, according to the higher fissuring for Koohsar (medium grain compared to Hashemi (long grain, it can be concluded that physical properties such as kernel slenderness ratio is effective on its fissuring.

Cluster structure in Cf nuclei

International Nuclear Information System (INIS)

Singh, Shailesh K.; Biswal, S.K.; Bhuyan, M.; Patra, S.K.; Gupta, R.K.

2014-01-01

Due to the availability of advance experimental facilities, it is possible to probe the nuclei upto their nucleon level very precisely and analyzed the internal structure which will help us to resolve some mysterious problem of the decay of nuclei. Recently, the relativistic nuclear collision, confirmed the α cluster type structure in the 12 C which is the mile stone for the cluster structure in nuclei. The clustering phenomena in light and intermediate elements in nuclear chart is very interesting. There is a lot of work done by our group in the clustering behaviour of the nuclei. In this paper, the various prospectus of clustering in the isotopes of Cf nucleus including fission state is discussed. Here, 242 Cf isotope for the analysis, which is experimentally known is taken. The relativistic mean field model with well established NL3 parameter set is taken. For getting the exact ground state configuration of the isotopes, the calculation for minimizing the potential energy surface is performed by constraint method. The clustering structure of other Cf isotopes is discussed

Enamel pretreatment with Er:YAG laser: effects on the microleakage of fissure sealant in fluorosed teeth

Directory of Open Access Journals (Sweden)

Mahtab Memarpour,

2014-08-01

Full Text Available Objectives The purpose of this in vitro study was to evaluate the microleakage and penetration of fissure sealant in permanent molar teeth with fluorosis after pretreatment of the occlusal surface. Materials and Methods A total of 120 third molars with mild dental fluorosis were randomly divided into 6 groups (n = 20. The tooth surfaces were sealed with an unfilled resin fissure sealant (FS material. The experimental groups included: 1 phosphoric acid etching (AE + FS (control; 2 AE + One-Step Plus (OS, Bisco + FS; 3 bur + AE + FS; 4 bur + AE + OS + FS; 5 Er:YAG laser + AE + FS; and 6 Er:YAG laser + AE + OS + FS. After thermocycling, the teeth were immersed in 0.5% fuchsin and sectioned. Proportions of mircoleakage (PM and unfilled area (PUA were measured by digital microscope. Results Overall, there were significant differences among all groups in the PM (p = 0.00. Group 3 showed the greatest PM, and was significantly different from groups 2 to 6 (p < 0.05. Group 6 showed the lowest PM. Pretreatment with Er:YAG with or without adhesive led to less PM than bur pretreatment. There were no significant differences among groups in PUA. Conclusions Conventional acid etching provided a similar degree of occlusal seal in teeth with fluorosis compared to those pretreated with a bur or Er:YAG laser. Pretreatment of pits and fissures with Er:YAG in teeth with fluorosis may be an alternative method before fissure sealant application.

Posterior perineal support as treatment for anal fissures--preliminary results with a new toilet seat device.

Science.gov (United States)

Tan, Kok-Yang; Seow-Choen, Francis; Hai, Chew Heng; Thye, Gan Kok

2009-03-01

Anal fissures can cause morbidity in an otherwise healthy young patient. The process of evacuation results in stretching and descent of the anoderm and perineum especially posteriorly. Posterior perineal support may provide counter pressure at the posterior aspect of the pelvic floor, balancing the pressure exerted by the faeces on the anal wall, thus improving evacuation and reducing the trauma associated with it, and reducing symptoms of anal fissures. Symptoms of constipation may also be reduced secondarily. We report the preliminary results with a novel, simple and noninvasive method of treatment provided by a toilet seat device. A prospective study was performed in 32 patients. The study was designed mainly to investigate the patients' subjective perceptions of their symptoms related to anal fissures and constipation. Questionnaires were provided to patients before, during and after treatment. The study revealed statistically significant improvement in pain, bleeding, symptoms of constipation and abdominal discomfort after 3 months usage of the device. The odds of patients perceiving an improvement in symptoms were also significantly increased after 3 months of treatment compared to 2 weeks of treatment. This preliminary study revealed that a posterior perineal support device can bring about significant improvement in the symptoms of patients with anal fissures. There may also be secondary benefits of a reduction in the symptoms of constipation. Although not conclusive, these results should serve as a springboard for further research into this area.

Ground fissures in the area of Mavropigi Village (N. Greece): Seismotectonics or mining activity?

Science.gov (United States)

Kalogirou, Eleni; Tsapanos, Theodoros; Karakostas, Vassilios; Marinos, Vassilios; Chatzipetros, Alexandros

2014-12-01

In the beginning of July 2010, a ground fissure was observed in the field near the village of Mavropigi (Northern Greece) and specifically in its NW side. Later on (early September), a second ground fissure was perceived, close and almost parallel to the first one and very close to the limits of the lignite exploitation mine (by the Public Power Corporation, PPC). It was observed that the village of Mavropigi slides away slowly towards the PPC lignite mine. Geological, seismological, as well as geotechnical survey in the field indicated that the phenomenon is related to the coal mining exploitation in the near vicinity of the village rather than to any seismotectonic activity in the surrounding area.

Land subsidence and earth fissures in south-central and southern Arizona, USA

Science.gov (United States)

Conway, Brian D.

2016-05-01

Land subsidence due to groundwater overdraft has been an ongoing problem in south-central and southern Arizona (USA) since the 1940s. The first earth fissure attributed to excessive groundwater withdrawal was discovered in the early 1950s near Picacho. In some areas of the state, groundwater-level declines of more than 150 m have resulted in extensive land subsidence and earth fissuring. Land subsidence in excess of 5.7 m has been documented in both western metropolitan Phoenix and Eloy. The Arizona Department of Water Resources (ADWR) has been monitoring land subsidence since 2002 using interferometric synthetic aperture radar (InSAR) and since 1998 using a global navigation satellite system (GNSS). The ADWR InSAR program has identified more than 25 individual land subsidence features that cover an area of more than 7,300 km2. Using InSAR data in conjunction with groundwater-level datasets, ADWR is able to monitor land subsidence areas as well as identify areas that may require additional monitoring. One area of particular concern is the Willcox groundwater basin in southeastern Arizona, which is the focus of this paper. The area is experiencing rapid groundwater declines, as much as 32.1 m during 2005-2014 (the largest land subsidence rate in Arizona State—up to 12 cm/year), and a large number of earth fissures. The declining groundwater levels in Arizona are a challenge for both future groundwater availability and mitigating land subsidence associated with these declines. ADWR's InSAR program will continue to be a critical tool for monitoring land subsidence due to excessive groundwater withdrawal.

Bacteriophage Lysin CF-301, a Potent Antistaphylococcal Biofilm Agent.

Science.gov (United States)

Schuch, Raymond; Khan, Babar K; Raz, Assaf; Rotolo, Jimmy A; Wittekind, Michael

2017-07-01

Biofilms pose a unique therapeutic challenge because of the antibiotic tolerance of constituent bacteria. Treatments for biofilm-based infections represent a major unmet medical need, requiring novel agents to eradicate mature biofilms. Our objective was to evaluate bacteriophage lysin CF-301 as a new agent to target Staphylococcus aureus biofilms. We used minimum biofilm-eradicating concentration (MBEC) assays on 95 S. aureus strains to obtain a 90% MBEC (MBEC 90 ) value of ≤0.25 μg/ml for CF-301. Mature biofilms of coagulase-negative staphylococci, Streptococcus pyogenes , and Streptococcus agalactiae were also sensitive to disruption, with MBEC 90 values ranging from 0.25 to 8 μg/ml. The potency of CF-301 was demonstrated against S. aureus biofilms formed on polystyrene, glass, surgical mesh, and catheters. In catheters, CF-301 removed all biofilm within 1 h and killed all released bacteria by 6 h. Mixed-species biofilms, formed by S. aureus and Staphylococcus epidermidis on several surfaces, were removed by CF-301, as were S. aureus biofilms either enriched for small-colony variants (SCVs) or grown in human synovial fluid. The antibacterial activity of CF-301 was further demonstrated against S. aureus persister cells in exponential-phase and stationary-phase populations. Finally, the antibiofilm activity of CF-301 was greatly improved in combinations with the cell wall hydrolase lysostaphin when tested against a range of S. aureus strains. In all, the data show that CF-301 is highly effective at disrupting biofilms and killing biofilm bacteria, and, as such, it may be an efficient new agent for treating staphylococcal infections with a biofilm component. Copyright © 2017 American Society for Microbiology.

Bacteriophage Lysin CF-301, a Potent Antistaphylococcal Biofilm Agent

KAUST Repository

Schuch, Raymond; Khan, Babar Khalid; Raz, Assaf; Rotolo, Jimmy A.; Wittekind, Michael

2017-01-01

Biofilms pose a unique therapeutic challenge because of the antibiotic tolerance of constituent bacteria. Treatments for biofilm-based infections represent a major unmet medical need, requiring novel agents to eradicate mature biofilms. Our objective was to evaluate bacteriophage lysin CF-301 as a new agent to target Staphylococcus aureus biofilms. We used minimum biofilm-eradicating concentration (MBEC) assays on 95 S. aureus strains to obtain a 90% MBEC (MBEC90) value of <= 0.25 mu g/ml for CF-301. Mature biofilms of coagulase-negative staphylococci, Streptococcus pyogenes, and Streptococcus agalactiae were also sensitive to disruption, with MBEC90 values ranging from 0.25 to 8 mu g/ml. The potency of CF-301 was demonstrated against S. aureus biofilms formed on polystyrene, glass, surgical mesh, and catheters. In catheters, CF-301 removed all biofilm within 1 h and killed all released bacteria by 6 h. Mixed-species biofilms, formed by S. aureus and Staphylococcus epidermidis on several surfaces, were removed by CF-301, as were S. aureus biofilms either enriched for small-colony variants (SCVs) or grown in human synovial fluid. The antibacterial activity of CF-301 was further demonstrated against S. aureus persister cells in exponential-phase and stationary-phase populations. Finally, the antibiofilm activity of CF-301 was greatly improved in combinations with the cell wall hydrolase lysostaphin when tested against a range of S. aureus strains. In all, the data show that CF-301 is highly effective at disrupting biofilms and killing biofilm bacteria, and, as such, it may be an efficient new agent for treating staphylococcal infections with a biofilm component.

Bacteriophage Lysin CF-301, a Potent Antistaphylococcal Biofilm Agent

KAUST Repository

Schuch, Raymond

2017-05-02

Biofilms pose a unique therapeutic challenge because of the antibiotic tolerance of constituent bacteria. Treatments for biofilm-based infections represent a major unmet medical need, requiring novel agents to eradicate mature biofilms. Our objective was to evaluate bacteriophage lysin CF-301 as a new agent to target Staphylococcus aureus biofilms. We used minimum biofilm-eradicating concentration (MBEC) assays on 95 S. aureus strains to obtain a 90% MBEC (MBEC90) value of <= 0.25 mu g/ml for CF-301. Mature biofilms of coagulase-negative staphylococci, Streptococcus pyogenes, and Streptococcus agalactiae were also sensitive to disruption, with MBEC90 values ranging from 0.25 to 8 mu g/ml. The potency of CF-301 was demonstrated against S. aureus biofilms formed on polystyrene, glass, surgical mesh, and catheters. In catheters, CF-301 removed all biofilm within 1 h and killed all released bacteria by 6 h. Mixed-species biofilms, formed by S. aureus and Staphylococcus epidermidis on several surfaces, were removed by CF-301, as were S. aureus biofilms either enriched for small-colony variants (SCVs) or grown in human synovial fluid. The antibacterial activity of CF-301 was further demonstrated against S. aureus persister cells in exponential-phase and stationary-phase populations. Finally, the antibiofilm activity of CF-301 was greatly improved in combinations with the cell wall hydrolase lysostaphin when tested against a range of S. aureus strains. In all, the data show that CF-301 is highly effective at disrupting biofilms and killing biofilm bacteria, and, as such, it may be an efficient new agent for treating staphylococcal infections with a biofilm component.

Endoscopic endonasal anatomy of superior orbital fissure and orbital apex regions: critical considerations for clinical applications.

Science.gov (United States)

Dallan, Iacopo; Castelnuovo, Paolo; de Notaris, Matteo; Sellari-Franceschini, Stefano; Lenzi, Riccardo; Turri-Zanoni, Mario; Battaglia, Paolo; Prats-Galino, Alberto

2013-05-01

The superior orbital fissure is a critical three-dimensional space connecting the middle cranial fossa and the orbit. From an endoscopic viewpoint, only the medial aspect has a clinical significance. It presents a critical relationship with the lateral sellar compartment, the pterygopalatine fossa and the middle cranial fossa. The connective tissue layers and neural and vascular structures of this region are described. The role of Muller's muscle is confirmed, and the utility of the maxillary and optic strut is outlined. Muller's muscle extends for the whole length of the inferior orbital fissure, passes over the maxillary strut and enters the superior orbital fissure, representing a critical surgical landmark. Dividing the tendon between the medial and inferior rectus muscle allows the identification of the main trunk of the oculomotor nerve, and a little laterally, it is usually possible to visualize the first part of the ophthalmic artery. Based on a better knowledge of anatomy, we trust that this area could be readily addressed in clinical situations requiring an extended approach in proximity of the orbital apex.

Superior vesical fissure concealed by giant omphalocele: A case report

OpenAIRE

Hayek, Danial; Massanyi, Eric; Mancuso, Melissa; Krepkovich, Katherine; Garrison, Aaron

2016-01-01

Omphalocele is an abdominal wall defect characterized by exteriorization of abdominal viscera that is covered by a membrane. Omphalocele has a well-known association with chromosome abnormalities. Here we present a case of a superior vesical fissure (SVF) initially disguised as a giant omphalocele in a newborn with trisomy 18. We also show unique prenatal imaging and discuss the importance and limitations of prenatal genetic testing.

Salt geologic evaluation of the impact of cryogenic fissures and halokinetic deformation processes on the integrity of the geological barrier of the salt dome Gorleben

International Nuclear Information System (INIS)

Hammer, Joerg; Fleig, Stephanie; Mingerzahn, Gerhard

2012-07-01

In several salt domes of the area close to Hannover fissures were observed that might be caused by thermally induced fissure formation due to cold periods (cryogenic fissures). Comprehensive substantial-structural analyses are performed as an example for the salt dome Bokeloh with respect to genesis and transferability to the salt dome Gorleben. Based on recent structure-geological, mineralogical-geochemical and micro-paleontological studies and thermo-mechanical modeling a solely thermally induced fissure formation due to cold periods is unlikely for the salt dome Bokeloh. There is a direct relation between the genesis of the salt dome Bokeloh, its regional tectonic site and the fissure formation. Due to the completely different genesis and another regional-tectonic situation the existence of cryogenic fissures is excluded for the salt dome Gorleben. The salt-geologic and experimental studies on the deformation of anhydrite layers in salt domes are summarized and evaluated with respect to the long-term consequences for a potential final repository for high-level heat-generating radioactive waste in the salt dome Gorleben. The studies confirm the older BGR studies that anhydrite layers do not represent hydraulic potential ling-distance liquid paths.

Groups of galaxies. III. the CfA survey

International Nuclear Information System (INIS)

Geller, M.J.; Huchra, J.P.

1983-01-01

We present a statistically homogeneous group catalog (CfA) based on the CfA redshift survey (Huchra et al.). Groups in the catalog are all density enhancements in redshift space of a factor greater than 20. Group members are identified according to the procedure described in our previous study (Huchra and Geller) of a shallower whole-sky sample. All groups contain at least three members. Of the 176 groups in the CfA catalog, 102 have been identified in one or more previous studies. Because our algorithm searches for volume rather than surface density enhancements, the groups in a given region generally change only through the addition of fainter members when the magnitude limit of the galaxy catalog increases. In the region of overlap, agreement between our shallow catalog and the CfA catalog is excellent

Non-invasive assessment of exercise performance in children with cystic fibrosis (CF) and non-cystic fibrosis bronchiectasis: is there a CF specific muscle defect?

Science.gov (United States)

Rosenthal, Mark; Narang, Indra; Edwards, Liz; Bush, Andrew

2009-03-01

Peripheral muscle dysfunction is increasingly recognized as complicating respiratory disease, but this is difficult to measure non-invasively. Can skeletal muscle function and efficiency be measured during exercise non-invasively using respiratory mass spectrometry (RMS); and is the known exercise dysfunction in cystic fibrosis (CF) children related in part to a disease specific defect of skeletal muscle, or a non-specific manifestation of chronic airway infection and inflammation. Calculations of effective pulmonary blood flow and stroke volume, blood oxygen content and oxygen dispatch from the lungs, skeletal muscle oxygen extraction and consumption, anerobic threshold and capacity, and gross, net and work efficiency in 106 controls and 36 children (18 CF) with bronchiectasis, all aged from 8 to 17 years. Normal values for control subjects are tabulated. CF and non-CF bronchiectatic subjects had similar physiology, and skeletal muscle abnormalities could not be detected. Reduced oxygen dispatch from the lungs, due to an inability to raise stroke volume, without an increase in functional residual capacity was the major factor in reduced exercise ability. Non-invasive RMS can be used to determine skeletal muscle function in children. The changes observed in CF subjects were very similar to non-CF bronchiectatic subjects and thus a CF specific defect was not demonstrated.

Atmospheric chemistry of CF3CH2CH2OH

DEFF Research Database (Denmark)

Hurley, Michael D.; Misner, Jessica A.; Ball, James C.

2005-01-01

Relative rate techniques were used to study the kinetics of the reactions of Cl atoms and OH radicals with CF3CH2C(O)H and CF3CH2CH2OH in 700 Torr of N-2 or air diluent at 296 2 K. The rate constants determined were k(Cl+CF3CH2C(O)H) = (1.81 +/- 0.27) x 10(-11), k(OH+CF3CH2C(O)H) = (2.57 +/- 0.44...

CFTR mutation analysis and haplotype associations in CF patients☆

OpenAIRE

Cordovado, S.K.; Hendrix, M.; Greene, C.N.; Mochal, S.; Earley, M.C.; Farrell, P.M.; Kharrazi, M.; Hannon, W.H.; Mueller, P.W.

2011-01-01

Most newborn screening (NBS) laboratories use second-tier molecular tests for cystic fibrosis (CF) using dried blood spots (DBS). The Centers for Disease Control and Prevention’s NBS Quality Assurance Program offers proficiency testing (PT) in DBS for CF transmembrane conductance regulator (CFTR) gene mutation detection. Extensive molecular characterization on 76 CF patients, family members or screen positive newborns was performed for quality assurance. The coding, regulatory regions and por...

Desenvolvimento das fissuras cerebrais fetais: avaliação com ultrassonografia tridimensional Fetal brain fissures development a three-dimensional ultrasonography study

Directory of Open Access Journals (Sweden)

Cynthia Maria Soares Alves

2011-03-01

Full Text Available OBJETIVO: avaliar a distância das fissuras cerebrais fetais à borda interna da calota craniana por meio da ultrassonografia tridimensional (US3D. MÉTODOS: realizou-se um estudo de corte transversal em 80 gestantes normais entre a 21ª e 34ª semanas de gestação. Avaliou-se a distância entre a tábua óssea interna da calota craniana fetal e as fissuras de Sylvius, parieto-occipital, hipocampo e calcarina. Para a obtenção desta distância para as três primeiras fissuras, realizou-se uma varredura tridimensional através do plano axial (nível dos ventrículos laterais. Para a obtenção da distância da fissura calcarina utilizou-se uma varredura coronal (nível dos lobos occiptais. Para avaliar a correlação entre as fissuras e a idade gestacional foram realizadas regressões de primeiro grau, sendo os ajustes calculados pelo coeficiente de determinação (R². Foram determinados percentis 5, 50 e 95 para cada fissura. Avaliou-se ainda a correlação entre a distância destas fissuras com os diâmetros biparietal (DBP e circunferência craniana (CC utilizando o coeficiente de correlação de Pearson (r. RESULTADOS: todas as medidas das fissuras apresentaram correlação linear com a idade gestacional (Sylvius: R²=0,5; parieto-occipital: R²=0,7; hipocampo: R²=0,3 e calcarina: R²=0,3. A média da distância das fissuras variou de 7,0 a 14,0 mm, 15,9 a 28,7 mm, 15,4 a 25,4 mm e 15,7 a 24,8 mm para as fissuras de Sylvius, parieto-occipital, hipocampo e calcarina, respectivamente. As fissuras de Sylvius e parieto-occipital apresentaram as maiores correlações com o DBP (r=0,8 e 0,7, respectivamente e a CC (r=0,7 e 0,8, respectivamente. CONCLUSÕES: a distância das fissuras cerebrais fetais à borda interna da calota craniana por meio da US3D apresentou correlação positiva com a idade gestacional.PURPOSE: to assess the distance of the fetal cerebral fissures from the inner edge of the skull by three-dimensional ultrasonography (3DUS

Neutron total cross section measurements on 249Cf

International Nuclear Information System (INIS)

Carlton, R.F.; Harvey, J.A.; Hill, N.W.; Pandey, M.S.; Benjamin, R.W.

1979-01-01

Neutron total cross section measurements were performed on a sample of 249 Cf (5.65 mg total weight) with the ORELA as a source of pulsed neutrons. The sample, the inverse thickness of which was 1542 barns/atom, consisted of 85.3% 249 Cf and 14.4% 249 Bk, and was cooled to liquid nitrogen temperature. Analyses were also made of data from a thin sample (l/n = 17430) of 65% 249 Cf in the region of the large fission resonance at 0.7 eV. Fifty-five resonances in 249 Cf were observed and analyzed over the energy range 0.1 eV to 90 eV by use of an R-matrix multilevel formalism. The resonance parameters obtained were used to determine the level spacing and the s-wave neutron and fission strength functions. Thermal total cross section measurements were also performed. 5 figures, 3 tables

Superior vesical fissure concealed by giant omphalocele: A case report

Directory of Open Access Journals (Sweden)

Danial Hayek

2016-11-01

Full Text Available Omphalocele is an abdominal wall defect characterized by exteriorization of abdominal viscera that is covered by a membrane. Omphalocele has a well-known association with chromosome abnormalities. Here we present a case of a superior vesical fissure (SVF initially disguised as a giant omphalocele in a newborn with trisomy 18. We also show unique prenatal imaging and discuss the importance and limitations of prenatal genetic testing.

Atmospheric chemistry of CF3CF═CH2 and (Z)-CF3CF═CHF: Cl and NO3 rate coefficients, Cl reaction product yields, and thermochemical calculations.

Science.gov (United States)

Papadimitriou, Vassileios C; Lazarou, Yannis G; Talukdar, Ranajit K; Burkholder, James B

2011-01-20

Rate coefficients, k, for the gas-phase reactions of Cl atoms and NO(3) radicals with 2,3,3,3-tetrafluoropropene, CF(3)CF═CH(2) (HFO-1234yf), and 1,2,3,3,3-pentafluoropropene, (Z)-CF(3)CF═CHF (HFO-1225ye), are reported. Cl-atom rate coefficients were measured in the fall-off region as a function of temperature (220-380 K) and pressure (50-630 Torr; N(2), O(2), and synthetic air) using a relative rate method. The measured rate coefficients are well represented by the fall-off parameters k(0)(T) = 6.5 × 10(-28) (T/300)(-6.9) cm(6) molecule(-2) s(-1) and k(∞)(T) = 7.7 × 10(-11) (T/300)(-0.65) cm(3) molecule(-1) s(-1) for CF(3)CF═CH(2) and k(0)(T) = 3 × 10(-27) (T/300)(-6.5) cm(6) molecule(-2) s(-1) and k(∞)(T) = 4.15 × 10(-11) (T/300)(-0.5) cm(3) molecule(-1) s(-1) for (Z)-CF(3)C═CHF with F(c) = 0.6. Reaction product yields were measured in the presence of O(2) to be (98 ± 7)% for CF(3)C(O)F and (61 ± 4)% for HC(O)Cl in the CF(3)CF═CH(2) reaction and (108 ± 8)% for CF(3)C(O)F and (112 ± 8)% for HC(O)F in the (Z)-CF(3)CF═CHF reaction, where the quoted uncertainties are 2σ (95% confidence level) and include estimated systematic errors. NO(3) reaction rate coefficients were determined using absolute and relative rate methods. Absolute measurements yielded upper limits for both reactions between 233 and 353 K, while the relative rate measurements yielded k(3)(295 K) = (2.6 ± 0.25) × 10(-17) cm(3) molecule(-1) s(-1) and k(4)(295 K) = (4.2 ± 0.5) × 10(-18) cm(3) molecule(-1) s(-1) for CF(3)CF═CH(2) and (Z)-CF(3)CF═CHF, respectively. The Cl-atom reaction with CF(3)CF═CH(2) and (Z)-CF(3)CF═CHF leads to decreases in their atmospheric lifetimes and global warming potentials and formation of a chlorine-containing product, HC(O)Cl, for CF(3)CF═CH(2). The NO(3) reaction has been shown to have a negligible impact on the atmospheric lifetimes of CF(3)CF═CH(2) and (Z)-CF(3)CF═CHF. The energetics for the reaction of Cl, NO(3), and OH with CF

Microleakage assessment of fissure sealant following fissurotomy bur or pumice prophylaxis use before etching

Directory of Open Access Journals (Sweden)

Ali Bagherian

2013-01-01

The aim of this investigation was to compare the microleakage level of fissure sealants prepared by a fissurotomy bur or pumice prophylaxis prior to acid etching. Materials and Methods: Ninety freshly extracted healthy maxillary premolar teeth were randomly selected for this investigation. Teeth were then divided into three fissure sealant preparatory groups of A: Fissurotomy bur + acid etch; B: Pumice prophylaxis + acid etch and C: Acid etch alone. Sealant was applied to the occlusal fissures of all specimens using a plastic instrument. This was to avoid any air trap under the sealant. Sample teeth were first thermocycled (1000 cycles, 20 s dwell time and then coated with two layers of nail varnish leaving 2 mm around the sealant. This was then followed by immersion in basic fuchsin 3%. Processed teeth were sectioned longitudinally and examined under a stereomicroscope for microleakage assessment using a score of 0-3. Collected data was then subjected to Kruskall-Wallis Analysis of Variance and Mann-Whitney U-test. P < 0.05 was considered as significant. Results: Teeth in fissurotomy bur and pumice prophylaxis groups had significantly reduced level of microleakage than those in acid etch alone (P = 0.005 and P = 0.003, respectively. Conclusion: Use of fissurotomy bur and pumice prophylaxis accompanied with acid etching appears to have a more successful reduction of microleakage than acid etch alone.

Giant desiccation fissures on the Black Rock and Smoke Creek Deserts, Nevada

Science.gov (United States)

Willden, R.; Mabey, D.R.

1961-01-01

Open fissures, from 100 to several hundred feet apart, that have produced polygonal patterns on the Black Rock Desert, Nevada, are believed to be giant desiccation cracks resulting from a secular trend toward aridity in the last few decades. Similar features on the Smoke Creek Desert probably have the same origin.

Insights into the degradation of (CF3)2CHOCH3 and its oxidative product (CF3)2CHOCHO & the formation and catalytic degradation of organic nitrates

Science.gov (United States)

Bai, Feng-Yang; Jia, Zi-Man; Pan, Xiu-Mei

2018-06-01

In this work, a systematic investigation of the atmospheric oxidation mechanism of (CF3)2CXOCH3 and their oxidative products (CF3)2CXOCHO (X = H, F) initiated by OH radical or Cl atom is performed by density functional theory. This study reveals that the introduction of NO and O2 promotes the formation of organic nitrates, which are hygroscopic and are inclined to form secondary organic aerosols (SOA) and can affect the air quality. The rate constants of the individual reactions are found to be in agreement with the experimental results. One of the intriguing findings of this work is that the peroxynitrite of (CF3)2CHOCH2OONO formed from the subsequent reactions of (CF3)2CHOCH3 is more favorable to isomerize to organic nitrate (CF3)2CHOCH2ONO2 than to dissociate into alkoxy radical (CF3)2CHOCH2O and NO2 because of the lower energy barrier of isomerization. The second significant observation is that the organic nitrate can be degraded more favorably with the presence of NH3, CH3NH2, and CH3NHCH3 than its naked decomposition reaction (CF3)2CHOCH2ONO2→(CF3)2CHOCHO + HONO. The ammonium salt, a vital part of haze, is harmful to human health and can be formed in the existence of the NH3, CH3NH2, and CH3NHCH3. In addition, the toxic substance of peroxyalkyl nitrate (CF3)2CHOC(O)ONO2 which can reduce the visibility of the atmosphere is produced as the primary subsequent oxidation product of (CF3)2CHOCHO in a NO-rich environment. The main species detected experimentally are confirmed by this study. The computational results are crucial to risk assessment and pollution prevention of the volatile organic compounds (VOCs).

Examination of the discharge mechanism of Li/CF(x) cells: Comparison of the electrochemical reduction mechanisms of PTFE and (CF(x))n by lithium

Science.gov (United States)

Baxam, Carl C.; Margalit, N.

1991-01-01

Swelling of (CF(x))(sub n) electrodes in commercial Li/(CF(x))(sub n) cells presents a limiting factor in cell design optimization. Examination of cathodes from such cells, after discharge, reveals a relation between cell operating temperatures and cathode swelling. Attempts to explain the swelling using the prevailing model for the cathode reaction have failed. A more suitable reaction mechanism is proposed based on the observed behavior of (CF(x))(sub n) electrodes on discharge and a comparison of the reaction products of (CF(x))(sub n) and polytetra fluoroethylene (PTFE) with lithium amalgams. The proposed mechanism is in agreement with the experimental data found in the literature.

Soil gas geochemistry in relation to eruptive fissures on Timanfaya volcano, Lanzarote Island (Canary Islands, Spain)

Science.gov (United States)

Padrón, Eleazar; Padilla, Germán; Hernández, Pedro A.; Pérez, Nemesio M.; Calvo, David; Nolasco, Dácil; Barrancos, José; Melián, Gladys V.; Dionis, Samara; Rodríguez, Fátima

2013-01-01

We report herein the first results of an extensive soil gas survey performed on Timanfaya volcano on May 2011. Soil gas composition at Timanfaya volcano indicates a main atmospheric source, slightly enriched in CO2 and He. Soil CO2 concentration showed a very slight deep contribution of the Timanfaya volcanic system, with no clear relation to the main eruptive fissures of the studied area. The existence of soil helium enrichments in Timanfaya indicates a shallow degassing of crustal helium and other possible deeper sources probably form cooling magma bodies at depth. The main soil helium enrichments were observed in good agreement with the main eruptive fissures of the 1730-36 eruption, with the highest values located at those areas with a higher density of recent eruptive centers, indicating an important structural control for the leakage of helium at Timanfaya volcano. Atmospheric air slightly polluted by deep-seated helium emissions, CO2 degassed from a cooling magma body, and biogenic CO2, might be the most plausible explanation for the existence of soil gas. Helium is a deep-seated gas, exhibiting important emission rates along the main eruptive fissure of the 1730-36 eruption of Timanfaya volcano.

Rice fissure resistance QTLs from ‘Saber’ complement those from ‘Cypress’

Science.gov (United States)

The economic value of broken rice is about half that of whole milled rice, so one goal of producers, millers, and rice breeders is to reduce grain breakage during the dehusking and milling processes. One of the primary causes of rice breakage is fissuring, or cracking, of the rice before it enters ...

Clostridium difficile carriage in adult cystic fibrosis (CF); implications for patients with CF and the potential for transmission of nosocomial infection.

Science.gov (United States)

Burke, D G; Harrison, M J; Fleming, C; McCarthy, M; Shortt, C; Sulaiman, I; Murphy, D M; Eustace, J A; Shanahan, F; Hill, C; Stanton, C; Rea, M C; Ross, R P; Plant, B J

2017-03-01

Clostridium difficile is an anaerobic Gram-positive, spore-forming, toxin-producing bacillus transmitted among humans through the faecal-oral route. Despite increasing carriage rates and the presence of C. difficile toxin in stool, patients with CF rarely appear to develop typical manifestations of C. difficile infection (CDI). In this study, we examined the carriage, toxin production, ribotype distribution and antibiotic susceptibility of C. difficile in a cohort of 60 adult patients with CF who were pre-lung transplant. C. difficile was detected in 50% (30/60) of patients with CF by culturing for the bacteria. C. difficile toxin was detected in 63% (19/30) of C. difficile-positive stool samples. All toxin-positive stool samples contained toxigenic C. difficile strains harbouring toxin genes, tcdA and tcdB. Despite the presence of C. difficile and its toxin in patient stool, no acute gastrointestinal symptoms were reported. Ribotyping of C. difficile strains revealed 16 distinct ribotypes (RT), 11 of which are known to be disease-causing including the hyper-virulent RT078. Additionally, strains RT002, RT014, and RT015, which are common in non-CF nosocomial infection were described. All strains were susceptible to vancomycin, metronidazole, fusidic acid and rifampicin. No correlation was observed between carriage of C. difficile or any characteristics of isolated strains and any recorded clinical parameters or treatment received. We demonstrate a high prevalence of hypervirulent, toxigenic strains of C. difficile in asymptomatic patients with CF. This highlights the potential role of asymptomatic patients with CF in nosocomial transmission of C. difficile. Copyright © 2016 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

[Early aseptic loosening of the CF 30 femoral stem].

Science.gov (United States)

Kovanda, M; Havlícek, V; Hudec, J

2007-02-01

The CF 30 stem in combination with a cementless acetabulum was used at the First Department of Orthopedic Surgery in Brno in the years 1994 to 1995. From the second year following implantation, aseptic stem loosening was recorded. In order to find explanation of this early loosening, the authors, in cooperation with the Institute of Solid Mechanics, Mechatronics and Biomechanics, carried out the stress-strain analysis in a model system. Eighty patients (31 men and 49 women) received a cemented CF30 femoral component in 1994. Of them, 16 patients underwent revision arthroplasty, three died of causes unrelated to the surgery, and four were lost to follow-up. The final clinical and radiographic check-up was carried out in 2001. The results of a comprehensive examination were available in 57 patients with a CF30 stem. The patients were evaluated on the basis of the Harris hip score and anteroposterior radiographs of the hip. X-ray films obtained immediately after surgery and those taken at regular intervals during follow-up were compared. The following characteristics were noted: translucent lines in individual zones along the stem at the cement-bone interface; osteolysis, i. e., non-linear translucent areas, at least 5 mm long, at the cement-bone interface; and subsidence of the femoral component, i. e., migration of the stem distal to the tip of the greater trochanter. The CF 30 stem survival curve showed that aseptic stem loosening occurred from post-implantation year 2, and increased during the following years. At 6 years and 6 months, a total of 16 patients underwent revision surgery, involving reimplantation in 14 and implant removal in 2 patients. Potential causes of aseptic loosening: Polyethylene wear.However, no acetabular loosening was found in this group, although acetabular components are reported to become loose more often than femoral components. By comparison of the stem survival curves for Poldi and CF 30 stems it appeared that, at 6 years and 6 months

Graphite moderated 252Cf source

International Nuclear Information System (INIS)

Sajo B, L.; Barros, H.; Greaves, E. D.; Vega C, H. R.

2014-08-01

The thorium molten salt reactor is an attractive and affordable nuclear power option for developing countries with insufficient infrastructure and limited technological capability. In the aim of personnel training and experience gathering at the Universidad Simon Bolivar there is in progress a project of developing a subcritical thorium liquid fuel reactor. The neutron source to run this subcritical reactor is a 252 Cf source and the reactor will use high-purity graphite as moderator. Using the MCNP5 code the neutron spectra of the 252 Cf in the center of the graphite moderator has been estimated along the channel where the liquid thorium salt will be inserted; also the ambient dose equivalent due to the source has been determined around the moderator. (Author)

Ternary-fragmentation-driving potential energies of 252Cf

Science.gov (United States)

Karthikraj, C.; Ren, Zhongzhou

2017-12-01

Within the framework of a simple macroscopic model, the ternary-fragmentation-driving potential energies of 252Cf are studied. In this work, all possible ternary-fragment combinations of 252Cf are generated by the use of atomic mass evaluation-2016 (AME2016) data and these combinations are minimized by using a two-dimensional minimization approach. This minimization process can be done in two ways: (i) with respect to proton numbers (Z1, Z2, Z3) and (ii) with respect to neutron numbers (N1, N2, N3) of the ternary fragments. In this paper, the driving potential energies for the ternary breakup of 252Cf are presented for both the spherical and deformed as well as the proton-minimized and neutron-minimized ternary fragments. From the proton-minimized spherical ternary fragments, we have obtained different possible ternary configurations with a minimum driving potential, in particular, the experimental expectation of Sn + Ni + Ca ternary fragmentation. However, the neutron-minimized ternary fragments exhibit a driving potential minimum in the true-ternary-fission (TTF) region as well. Further, the Q -value energy systematics of the neutron-minimized ternary fragments show larger values for the TTF fragments. From this, we have concluded that the TTF region fragments with the least driving potential and high Q values have a strong possibility in the ternary fragmentation of 252Cf. Further, the role of ground-state deformations (β2, β3, β4, and β6) in the ternary breakup of 252Cf is also studied. The deformed ternary fragmentation, which involves Z3=12 -19 fragments, possesses the driving potential minimum due to the larger oblate deformations. We also found that the ground-state deformations, particularly β2, strongly influence the driving potential energies and play a major role in determining the most probable fragment combinations in the ternary breakup of 252Cf.

Evaluation of microtensile bond strength of different fissure sealants to bovine enamel.

Science.gov (United States)

Sen Tunc, E; Bayrak, S; Tuloglu, N; Ertas, E

2012-03-01

The aim of this study was to evaluate the microtensile bond strength (μTBS) of a new fissure sealant and compare it with conventional sealants which are applied to enamel alone, and also with self-etch and etch-and-rinse adhesives. Enamel specimens were prepared and randomly distributed into three groups according to fissure sealant (Aegis, Helioseal F, Helioseal Clear). Each group was then subdivided according to adhesive system (Clearfil S3, Single Bond, no adhesive). A universal testing machine was used to measure μTBS, and data were analysed using one-way ANOVA and Tukey's tests. μTBS values for all Aegis subgroups were significantly lower than for comparable Helioseal F and Helioseal Clear subgroups (p 0.05). In the Helioseal Clear group, μTBS values for Single Bond were significantly higher than for Clearfil S3 (p adhesive subgroups in the Aegis or Helioseal F groups (p > 0.05). Sealant μTBS values may be affected by material content. The addition of an adhesive may improve μTBS values of sealant to enamel. © 2012 Australian Dental Association.

[Banana peel: a possible source of infection in the treatment of nipple fissures].

Science.gov (United States)

Novak, Franz Reis; de Almeida, João Aprígio Guerra; de Souza e Silva, Rosana

2003-01-01

To study the microbiology of banana peel being sold in the city of Rio de Janeiro, in an attempt to determine the possibility that the peel may represent a source of infection for women who use it to treat nipple fissures. The following microorganisms were studied in 20 banana peel samples: mesophiles, total coliforms, fecal coliforms, Pseudomonas aeruginosa, lipolytic and proteolytic microorganisms, molds and yeasts, lactic bacteria, and coagulase-positive staphylococcus. The microbiological analyses revealed the occurrence of several typical groups of microorganisms, with the following distribution of positive results being detected in banana peel samples: mesophiles, 100%; total coliforms, 20%; coagulase-positive staphylococcus, 25%; molds and yeasts, 30%; proteolytic microorganisms, 70%; lipolytic microorganisms, 30%, and lactic bacteria, 95%. Fecal coliforms and Pseudomonas aeruginosa were not isolated. The results show the presence of potentially pathogenic microorganisms in levels which could compromise the microbiological quality of the banana peel. Its use for the treatment of nipple fissures can initiate an infectious process.

A Novel Approach to Model Earth Fissure Caused by Extensive Aquifer Exploitation and its Application to the Wuxi Case, China

Science.gov (United States)

Ye, Shujun; Franceschini, Andrea; Zhang, Yan; Janna, Carlo; Gong, Xulong; Yu, Jun; Teatini, Pietro

2018-03-01

Initially observed in the semiarid basins of southwestern USA, earth fissures due to aquifer over-exploitation are presently threatening a large number of subsiding basins in various countries worldwide. Different mechanics have been proposed to explain this process, such as differential compaction, horizontal movements, and fault reactivation. Numerical modeling and prediction of this major geohazard caused by overuse of groundwater resources are challenging because of two main requirements: shifting from the classical continuous to discontinuous geomechanics and incorporating two-dimensional features (the earth fissures) into large three-dimensional (3-D) modeling domain (the subsiding basin). In this work, we proposed a novel modeling approach to simulate earth fissure generation and propagation in 3-D complex geological settings. A nested two-scale approach associated with an original nonlinear elastoplastic finite element/interface element simulator allows modeling the mechanics of earth discontinuities, in terms of both sliding and opening. The model is applied on a case study in Wuxi, China, where groundwater pumping between 1985 and 2004 has caused land subsidence larger than 2 m. The model outcomes highlight that the presence of a shallow (˜80 m deep) bedrock ridge crossing the Yangtze River delta is the key factor triggering the earth fissure development in this area. Bending of the alluvial deposits around the ridge tip and shear stress due to the uneven piezometric change and asymmetrical shape of the bedrock have caused the earth fissure to onset at the land surface and propagate downward to a maximum depth of about 20-30 m. Maximum sliding and opening are computed in the range of 10-40 cm, in agreement with the order of magnitude estimated in the field.

Groundwater flow through fissured rock: field investigations and interpretation in the Albigna dam area, Graubuenden, Switzerland

International Nuclear Information System (INIS)

Kovari, K.; Arn, Th.; Gmuender, Ch.

1989-11-01

The rock foundation of a dam was chosen as the site for repeated observations of flow patterns in a fissured rock. Our project was carried out at the Albigna Dam in the Canton of Graubuenden, Switzerland, where the greatest fluctuation in the level of the lake was approximately 100 m. In the area of the dam the rock consists of a fresh, solid granite, whose fissure systems were well known as regards position and distribution. The measurement program for assessing the flow conditions consisted of two elements: piezometric pressure measurements in boreholes and strain measurements in boreholes. Pressure measurements were accomplished to define the potential field. Strain measurements were accomplished to detect fracture opening and closing as a function of the fluctuations in the lake level. From a combination of the two sets of observations it was hoped to be able to determine the interaction between hydraulics and mechanics, i.e. the coupling of two key processes with a possible influence on a changing permeability of the rock. Using the 'sliding micrometer', the continuous strain distribution was determined along two boreholes in the measuring plane. Pressures were measured using the 'Piezodex' system. Mathematical investigations were conducted with the AQUA-ROCK finite element program on a 2D-model. From just a visual comparison of the measured and calculated values it is clear that a different model achieves the best correlation depending on the level of the lake. For the maximum lake level, however, it is essential to take account of the action of the fissures either by way of the idealization according to Snow (main model 2) or by considering the individual fissures (main model 3). (author) figs., tabs., 12 refs

Bk and Cf chromatographic separation and 249Bk/248Cm and 249Cf/248Cm elemental ratios determination by inductively coupled plasma quadrupole mass spectrometry

International Nuclear Information System (INIS)

Gourgiotis, A.; Isnard, H.; Nonell, A.; Aubert, M.; Stadelmann, G.; Dupont, E.; AlMahamid, I.; Tiang, G.; Rao, L.; Lukens, W.; Cassette, P.; Panebianco, S.; Letourneau, A.; Chartier, F.

2013-01-01

The French Atomic Energy Commission has carried out several experiments for the study of minor-actinide transmutation processes in high intensity thermal neutron flux. In this context a Cm sample enriched in 248 Cm (97%) was irradiated in a thermal neutron flux at the High Flux Reactor (HFR) of the Laue-Langevin Institute (ILL). The precise and accurate determination of Cf isotope ratios and of 249 Bk/ 248 Cm and 249 Cf/ 248 Cm elemental ratios in the 248 Cm irradiated sample is crucial for the calculation of actinide neutron capture cross-sections.This work describes an analytical procedure for the separation and the isotope ratio measurement of Bk and Cf in the irradiated sample.The Bk and Cf separation is based on a lanthanides separation protocol previously developed by the laboratory. Well-defined retention times for Bk and Cf were obtained by coupling the Ionic Chromatography (IC) with an ICP-QMS. All conditions of element separation by IC and the different steps of the analytical protocol in order to obtain the isotopic and elemental ratios are presented. Relative uncertainties of Cf isotopic ratios range from 0.3% to 0.5% and the uncertainty of the 249 Bk/ 248 Cm and 249 Cf/ 248 Cm elemental ratios are respectively 6.1% and 3.2%.This level of uncertainty for both isotopic and elemental ratios is in perfect agreement with the requirement for transmutation studies. (authors)

Chronic anal fissure: morphometric analysis of the anal canal at 3.0 Tesla MR imaging.

Science.gov (United States)

Erden, Ayşe; Peker, Elif; Gençtürk, Zeynep Bıyıklı

2017-02-01

OBJECTıVE: To compare the morphometric data relating to the muscular structures of the anal canal, in patients with chronic anal fissure and in control group, examined at a 3.0 Tesla MR system. Forty-seven consecutive patients with chronic anal fissure and randomly selected 40 patients who had no claims for perianal disease during their life time were included in the study. T2-weighted sagittal, high-resolution (HR) T2-weighted, and contrast-enhanced fat-suppressed T1-weighted oblique axial and oblique coronal images were retrospectively analyzed by two observers in consensus. Thickness of sphincteric muscles, anal canal length, anorectal angle, thickness of anococcygeal ligament, depth of Minor triangle, width between subcutaneous sphincters, vascularity of posterior commissure, visibility of posterosuperior projection of external sphincter, and angle between the distal anal canal and posterosuperior projection of external sphincter (H angle) in patients and in controls were compared and analyzed using t test, Mann-Whitney U test, and Spearman correlation. The patients with chronic anal fissure had longer anal canal (51.50 mm ± 0.91 vs. 44.11 mm ± 0.71; p = 0.000), thicker internal anal sphincter muscle at mid-anal level (4.18 ± 0.15 vs. 3.39 ± 0.07; p = 0.007), and wider space between subcutaneous external sphincters (11.39 ± 0.50 vs. 6.89 ± 0.22; p = 0.000). In patients, there was a positive correlation between H angle and external sphincter thickness at proximal (r = 0.347; p = 0.021), middle (r = 0427; p = 0.000), and distal (r = 0.518; p = 0.000)) levels of the anal canal. CONCLUSıON: 3.0 Tesla MR imaging provides detailed information about the morphometric changes in the anal sphincter muscles in patients with chronic anal fissure.

Laboratory-scale shielded cell for 252Cf

International Nuclear Information System (INIS)

Anderl, R.A.; Cargo, C.H.

1979-01-01

A shielded-cell facility for storing and handling remotely up to 2 milligram quantities of unencapsulated 252 Cf has been built in a radiochemistry laboratory at the Test Reactor Area of the Idaho National Engineering Laboratory. Unique features of this facility are its compact bulk radiation shield of borated gypsum and transfer lines which permit the transport of fission product activity from 252 Cf fission sources within the cell to a mass separator and to a fast radiochemistry system in nearby rooms

Atmospheric chemistry of CH3O(CF2CF2O)(n)CH3 (n=1-3): Kinetics and mechanism of oxidation initiated by Cl atoms and OH radicals, IR spectra, and global warmin potentials

DEFF Research Database (Denmark)

Andersen, Mads Peter Sulbæk; Hurley, MD; Wallington, TJ

2004-01-01

Smog chambers equipped with FTIR spectrometers were used to study the Cl atom and OH radical initiated oxidation of CH3O(CF2CF2O)(n)CH3 (n = 1-3) in 720 +/- 20 Torr of air at 296 +/- 3 K. Relative rate techniques were used to measure k(Cl + CH3O(CF2CF2O)(n)CH3) (3.7 +/- 10.7) x 10(-13) and k......(OH + CH3O(CF2CF2O)(n)CH3) = (2.9 +/- 0.5) x 10(-11) cm(3) molecule(-1) s(-1) leading to an estimated atmospheric lifetime of 2 years for CH3O(CF2CF2O),CH3. The Cl initiated oxidation of CH3O(CF2CF2O),CH3 in air diluent gives CH3O(CF2CF2O)(n)C(O)H in a yield which is indistinguishable from 100 Further...... oxidation leads to the diformate, H(O)CO(CF2CF2O)(n)C(O)H. A rate constant of k(Cl + CH3O(CF2CF2O)(n)CHO) = (1.81 +/- 0.36) x 10(-13) cm(3) molecule(-1) s-1 was determined. Quantitative infrared spectra for CH3O(CF2CF2O)(n)CH3 (n = 1-3) were recorded and used to estimate halocarbon global warming potentials...

System control for the modulated 252Cf source ''Shuffler''

International Nuclear Information System (INIS)

Stephens, M.M.

1975-06-01

The design and theory of operation of the control chassis for a 252 Cf nondestructive assay system are described. This system repetitively transfers a 252 Cf source from the irradiation region to a shielded position before measuring the delayed neutrons. The design criteria for the system were: rapid movement and precise positioning of the 252 Cf source, precise positioning of the sample, and very accurate timing of the irradiate and count cycles. To achieve these results crystal oscillators were used for timing, and stepping motors were used to position the sample and the source. (U.S.)

Flows of Newtonian and Power-Law Fluids in Symmetrically Corrugated Cappilary Fissures and Tubes

Science.gov (United States)

Walicka, A.

2018-02-01

In this paper, an analytical method for deriving the relationships between the pressure drop and the volumetric flow rate in laminar flow regimes of Newtonian and power-law fluids through symmetrically corrugated capillary fissures and tubes is presented. This method, which is general with regard to fluid and capillary shape, can also be used as a foundation for different fluids, fissures and tubes. It can also be a good base for numerical integration when analytical expressions are hard to obtain due to mathematical complexities. Five converging-diverging or diverging-converging geometrics, viz. wedge and cone, parabolic, hyperbolic, hyperbolic cosine and cosine curve, are used as examples to illustrate the application of this method. For the wedge and cone geometry the present results for the power-law fluid were compared with the results obtained by another method; this comparison indicates a good compatibility between both the results.

Flows of Newtonian and Power-Law Fluids in Symmetrically Corrugated Cappilary Fissures and Tubes

Directory of Open Access Journals (Sweden)

Walicka A.

2018-02-01

Full Text Available In this paper, an analytical method for deriving the relationships between the pressure drop and the volumetric flow rate in laminar flow regimes of Newtonian and power-law fluids through symmetrically corrugated capillary fissures and tubes is presented. This method, which is general with regard to fluid and capillary shape, can also be used as a foundation for different fluids, fissures and tubes. It can also be a good base for numerical integration when analytical expressions are hard to obtain due to mathematical complexities. Five converging-diverging or diverging-converging geometrics, viz. wedge and cone, parabolic, hyperbolic, hyperbolic cosine and cosine curve, are used as examples to illustrate the application of this method. For the wedge and cone geometry the present results for the power-law fluid were compared with the results obtained by another method; this comparison indicates a good compatibility between both the results.

Groundwater drainage from fissures as a source for lahars

Science.gov (United States)

Johnson, P. J.; Valentine, G. A.; Stauffer, P. H.; Lowry, C. S.; Sonder, I.; Pulgarín, B. A.; Santacoloma, C. C.; Agudelo, A.

2018-04-01

One mechanism for generating lahars at volcanoes experiencing unrest is the disruption of internal aquifers. These disruptions can trigger releases of large quantities of groundwater. An example of such aquifer disruption occurred at Nevado del Huila Volcano, Colombia, during February and April 2007 when large fractures formed across the summit area of the volcano and lahars were emitted from them. Previous work interpreted that lahar volumes could not be accounted for by melted glacial snow or precipitation, and by elimination suggested that the primary water source was groundwater. Conceptual models have been developed for perched, confined aquifers that have been heated and pressurized by magma intrusions, followed by sudden pressure release and water emission during fracture formation. We consider an alternative end member wherein water release from large fissures at volcanoes is driven by simple gravity drainage. We apply numerical modeling to quantify water discharge from the porous medium surrounding a fissure with a low-elevation free exit. If a long fracture with high vertical extent (on the order of hundreds of meters) intersects a highly connected saturated porous medium, large volumes (on order 103 m3/m of crack length) of water may be released within tens of minutes. The drainage rates from the model may be adequate to account for the Nevado del Huila events if the medium surrounding the crack contains a large volume of water and has high horizontal permeability. This simple but poorly understood mechanism can present a hazard on its own or compound other processes releasing water from volcanoes.

Atmospheric chemistry of CF3O radicals: Reaction with H2O

DEFF Research Database (Denmark)

Wallington, T.J.; Hurley, M.D.; Schneider, W.F.

1993-01-01

Evidence is presented that CF3O radicals react with H2O in the gas phase at 296 K to give CF3OH and OH radicals. This reaction is calculated to be exothermic by 1.7 kcal mol-I implying a surprisingly strong CF3O-H bond energy of 120 +/- 3 kcal mol-1. Results from a relative rate experimental study...... suggest that the rate constant for the reaction of CF3O radicals with H2O lies in the range (0.2-4.0) X 10(-17) cm3 molecule-1 s-1. Implications for the atmospheric chemistry of CF3O radicals are discussed....

Dynamics of leaching a uniformly fissured ore body

International Nuclear Information System (INIS)

Ignatov, A.A.; Proskurin, S.A.

1987-01-01

Mathematical simulation was used to study the dynamics of mass transfer during the percolation of a reagent solution through a packing of coarse ore particles. The uniformly fissured ore body was represented by a cubic packing of spherical particles of constant radius, formed from a chemically inert silicate cement with a uniformly distributed soluble mineral component. The rate of percolation of the reagent through the packing was constant. The proposed model can be used to find the conditions for underground hydrodynamic leaching. The rate of non-catalytic solid-liquid reaction was deduced on the basis of both the kinetics of dissolution of the mineral component of the ore and the rate of diffusion of the dissolved substance

Atmospheric chemistry of CF3CFHCF2OCF3 and CF3CFHCF2OCF2H: Reaction with Cl atoms and OH radicals, degradation mechanism, and global warming potentials

DEFF Research Database (Denmark)

Wallington, TJ; Hurley, MD; Nielsen, OJ

2004-01-01

Fourier transform infrared (FTIR) smog chamber techniques were used to measure k(Cl + CF3CFHCF2OCF3) = (4.09 +/- 0.42) x 10(-17), k(OH + CF3CFHCF2OCF3) = (1.43 +/- 0.28) x 10(-15), k(Cl + CF3CFHCF2OCF2H) = (6.89 +/- 1.29) x 10(-17), and k(OH + CF3CFHCF2OCF2H) = (1.79 +/- 0.34) x 10(-15) cm(3) mol...... respectively. The 100-year time horizon global warming potentials of CF3CFHCF2OCF3 and CF3CFHCF2OCF2H relative to CO2 are 4530 and 4340. Results are discussed with respect to the atmospheric chemistry of hydrofluoroethers....

Optimal Dosing of Botulinum Toxin for Treatment of Chronic Anal Fissure: A Systematic Review and Meta-Analysis.

Science.gov (United States)

Lin, Jin Xin; Krishna, Sanjeev; Su'a, Bruce; Hill, Andrew G

2016-09-01

Chronic anal fissures are associated with significant morbidity and reduced quality of life. Studies have investigated the efficacy of botulinum toxin with variable results; thus, there is currently no consensus on botulinum toxin dose or injection sites. This study aimed to systematically analyze trials studying the efficacy of botulinum toxin for treatment of chronic anal fissure to identify an optimum dosage and injection regimen. A comprehensive review of the literature was conducted according to PRISMA guidelines. PubMed/Medline, Embase, Scopus, and the Cochrane Library were searched from inception to June 2015. All clinical trials that investigated the efficacy of botulinum toxin for chronic anal fissure were selected according to specific criteria. The interventions used were various doses of botulinum toxin. Clinical outcomes, dosage, and injection site data were evaluated with weighted pooled results for each dosage and 95% confidence intervals. There were 1158 patients, with 661 in botulinum toxin treatment arms, from 18 clinical trials included in this review. The outcomes of interest were 3-month healing, incontinence, and recurrence rates. Meta-regression analysis demonstrated a small decrease in healing rate (0.34%; 95% CI, 0-0.68; p = 0.048) with each increase in dosage, a small increase in incontinence rate (1.02 times; 95% CI, 1.0002-1.049; p = 0.048) with each increase in dosage and a small increase in recurrence rate (1.037 times; 95% CI, 1.018-1.057; p = 0.0002) with each increase in dosage. The optimum injection site could not be determined. This study was limited by weaknesses in the underlying evidence, such as variable quality, short follow-up, and a limited range of doses represented. Fissure healing with lower doses of botulinum toxin is as effective as with high doses. Lower doses also reduce the risk of incontinence and recurrence in the long term.

76 FR 27282 - Airworthiness Directives; General Electric Company CF34-10E2A1; CF34-10E5, CF34-10E5A1; CF34-10E6...

Science.gov (United States)

2011-05-11

... methods: Federal eRulemaking Portal: Go to http://www.regulations.gov . Follow the instructions for... Investigation of a General Electric Company (GE) CF34-10E turbofan engine experiencing high fan frame vibrations... likely to exist or develop in other products of the same type design. Proposed AD Requirements This...

CF 2000 ECUMÊNICA: EPISÓDIO OU NOVA FASE DA CF?

Directory of Open Access Journals (Sweden)

Gabriele Cipriani

2001-01-01

Full Text Available No ano 2000, sete igrejas cristãs, membros do Conselho Nacional de Igrejas Cristãs do Brasil (CONIC, surpreenderam a opinião pública brasileira colocando-se na contramão da competição cotidiana que caracteriza o anúncio do Evangelho no Brasil. Promoveram em conjunto uma Campanha da Fraternidade (CF criada e realizada há 36 anos pela CNBB. Isso tinha algo de incrível.

Simulation of the Flow Through Porous Layers Composed of Converging-Diverging Capillary Fissures or Tubes

Science.gov (United States)

Walicka, A.

2018-02-01

In this paper, a porous medium is modelled by a network of converging-diverging capillaries which may be considered as fissures or tubes. This model makes it necessary to consider flows through capillary fissures or tubes. Therefore an analytical method for deriving the relationships between pressure drops, volumetric flow rates and velocities for the following fluids: Newtonian, polar, power-law, pseudoplastic (DeHaven and Sisko types) and Shulmanian, was developed. Next, considerations on the models of pore network for Newtonian and non-Newtonian fluids were presented. The models, similar to the schemes of central finite differences may provide a good basis for transforming the governing equations of a flow through the porous medium into a set of linear or quasi-linear algebraic equations. It was shown that the some coefficients in these algebraic equations depend on the kind of the capillary convergence.

Investigation of the characteristics of 252Cf-detectors

International Nuclear Information System (INIS)

Karlsson, Erik

2004-12-01

In the first chapter the characteristic behaviors of two Cf detectors have been investigated by performing pilot measurements. The detector with the stronger source gives an unstable signal with a low signal/noise ratio. Therefore this detector has not been further investigated. The ionization chamber reacts on both fission products and alpha decay. An energy experiment showed that there were large difficulties to separate those decays. A plastic scintillator, which reacts on both photons and neutrons, was used for neutron detection. Energy spectrums were performed and the result showed that it is difficult to set an energy threshold to separate the neutrons and the photons. The discrimination will rather be achieved by time of flight methods which is discussed under the second chapter in this thesis; Experimental results. An other experiment was done in order to investigate whether it is possible to detect any delayed components from the spontaneous fission of Cf. The result showed that delayed components existed. Either they are delayed neutrons from exited fission products, or it is some delay related to the charge collection in the Cf detector. Correlation measurements showed that few events are coincident. Only 50% of the signals from the plastic scintillator are correlated with the Cf source

Electron and photon impact studies of CF3I

International Nuclear Information System (INIS)

Mason, N.J.; Eden, S.; Limao Vieire, P.; Kendall, P.; Pathak, S.; Dawes, A.; Tegeder, P.; Kitajima, M.; Okamoto, M.; Tanaka, H.; Samukawa, S.; Cho, H.; Hoffmann, S.

2002-01-01

The manufacture of ultra-large-scale-integrated circuits, requires a well collimated, specially uniform, high density plasma source operating under low pressure conditions. The main feed gases used are perfluorocarbons, however these are also strong greenhouse gases, therefore must be replaced by alternative compounds with low global warming potentials. CF 3 I is one possible replacement, due to its high photolysis rate, is expected to have a very short lifetime in the atmosphere. It is also predicted to be able to produced high yields of CF 3 radicals in any etching plasma, since its weak C - I bond should be possible to break by direct electron impact. Prior adapting existing industrial plasma reactors to use CF 3 I, it is necessary to run simulations of the reactant plasma, requiring a detailed database of the electron interactions with the feed gases, however such CF 3 I data does not exist. Thus an exhaustive series of experiments to measure elastic and inelastic scattering from CF 3 I including a study of its electronic state spectroscopy using photon absorption and electron scattering techniques were performed. Electron energy loss spectroscopy (EELS) and photo-absorption spectroscopy were employed. A comprehensive set of differential cross sections for the elastic scattering CF 3 I over the impact energy region from 1.5 to 60 eV for scattering angles between 20 and 130 were compiled. The photo-absorption spectrum is characterized by three regions, the first is a very weak continuum around centered about 4.7 eV; the second consists of four prominent band structures observed around 7.4, 8.1, 9.0 and 9.8 eV, respectively, containing vibrational structure from 7 to 10 eV; the third (above the ionization potentials) could only be studied by using EELS and additional broad peaks were observed. (nevyjel)

Fissure sealant materials: Wear resistance of flowable composite resins.

Science.gov (United States)

Asefi, Sohrab; Eskandarion, Solmaz; Hamidiaval, Shadi

2016-01-01

Background. Wear resistance of pit and fissure sealant materials can influence their retention. Wear characteristics of sealant materials may determine scheduling of check-up visits. The aim of this study was to compare wear resistance of two flowable composite resins with that of posterior composite resin materials. Methods. Thirty-five disk-shaped specimens were prepared in 5 groups, including two flowable composite resins (Estelite Flow Quick and Estelite Flow Quick High Flow), Filtek P90 and Filtek P60 and Tetric N-Ceram. The disk-shaped samples were prepared in 25-mm diameter by packing them into a two-piece aluminum mold and then light-cured. All the specimens were polished for 1minute using 600-grit sand paper. The samples were stored in distilled water at room temperature for 1 week and then worn by two-body abrasion test using "pin-on-disk" method (with distilled water under a 15-Nload at 0.05 m/s, for a distance of 100 meter with Steatite ceramic balls antagonists). A Profilometer was used for evaluating the surface wear. Data were analyzed with the one-way ANOVA. Results. Estelite Flow Quick exhibited 2708.9 ± 578.1 μm(2) and Estelite Flow Quick High Flow exhibited 3206 ± 2445.1 μm(2)of wear but there were no significant differences between the groups. They demonstrated similar wear properties. Conclusion. Estelite flowable composite resins have wear resistance similar to nano- and micro-filled and micro-hybrid composite resins. Therefore, they can be recommended as pit and fissure sealant materials in the posterior region with appropriate mechanical characteristics.

Comparative study of electroless nickel film on different organic acids modified cuprammonium fabric (CF)

Science.gov (United States)

Zhao, Hang; Lu, Yinxiang

2016-01-01

Nickel films were grown on citric acid (CA), malic acid (MA) and oxalic acid (OA) modified cuprammonium fabric (CF) substrates via electroless nickel deposition. The nickel films were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD). Their individual deposition rate and electromagnetic interference (EMI) shielding effectiveness (SE) were also investigated to compare the properties of electroless nickel films. SEM images illustrated that the nickel film on MA modified CF substrate was smooth and uniform, and the density of nickel nuclei was much higher. Compared with that of CA modified CF, the coverage of nickel nuclei on OA and MA modified CF substrate was very limited and the nickel particles size was too big. XRD analysis showed that the nickel films deposited on the different modified CF substrates had a structure with Ni (1 1 1) preferred orientation. All the nickel coatings via different acid modification were firmly adhered to the CF substrates, as demonstrated by an ultrasonic washing test. The result of tensile test indicated that the electroless nickel plating on CF has ability to strengthen the CF substrate while causes limited effect on tensile elongation. Moreover, the nickel film deposited on MA modified CF substrate showed more predominant in EMI SE than that deposited on CA or OA modified CF.

Graphite moderated {sup 252}Cf source

Energy Technology Data Exchange (ETDEWEB)

Sajo B, L.; Barros, H.; Greaves, E. D. [Universidad Simon Bolivar, Nuclear Physics Laboratory, Apdo. 89000, 1080A Caracas (Venezuela, Bolivarian Republic of); Vega C, H. R., E-mail: fermineutron@yahoo.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas (Mexico)

2014-08-15

The thorium molten salt reactor is an attractive and affordable nuclear power option for developing countries with insufficient infrastructure and limited technological capability. In the aim of personnel training and experience gathering at the Universidad Simon Bolivar there is in progress a project of developing a subcritical thorium liquid fuel reactor. The neutron source to run this subcritical reactor is a {sup 252}Cf source and the reactor will use high-purity graphite as moderator. Using the MCNP5 code the neutron spectra of the {sup 252}Cf in the center of the graphite moderator has been estimated along the channel where the liquid thorium salt will be inserted; also the ambient dose equivalent due to the source has been determined around the moderator. (Author)

Enterococcus faecalis Sex Pheromone cCF10 Enhances Conjugative Plasmid Transfer In Vivo.

Science.gov (United States)

Hirt, Helmut; Greenwood-Quaintance, Kerryl E; Karau, Melissa J; Till, Lisa M; Kashyap, Purna C; Patel, Robin; Dunny, Gary M

2018-02-13

Cell-cell communication mediated by peptide pheromones (cCF10 [CF]) is essential for high-frequency plasmid transfer in vitro in Enterococcus faecalis To examine the role of pheromone signaling in vivo , we established either a CF-producing (CF+) recipient or a recipient producing a biologically inactive variant of CF (CF- recipient) in a germfree mouse model 3 days before donor inoculation and determined transfer frequencies of the pheromone-inducible plasmid pCF10. Plasmid transfer was detected in the upper and middle sections of the intestinal tract 5 h after donor inoculation and was highly efficient in the absence of antibiotic selection. The transconjugant/donor ratio reached a maximum level approaching 1 on day 4 in the upper intestinal tract. Plasmid transfer was significantly lower with the CF- recipient. While rescue of the CF- mating defect by coculture with CF+ recipients is easily accomplished in vitro , no extracellular complementation occurred in vivo This suggests that most pheromone signaling in the gut occurs between recipient and donor cells in very close proximity. Plasmid-bearing cells (donors plus transconjugants) steadily increased in the population from 0.1% after donor inoculation to about 10% at the conclusion of the experiments. This suggests a selective advantage of pCF10 carriage distinct from antibiotic resistance or bacteriocin production. Our results demonstrate that pheromone signaling is required for efficient pCF10 transfer in vivo In the absence of CF+ recipients, a low level of transfer to CF- recipients occurred in the gut. This may result from low-level host-mediated induction of the donors in the gastrointestinal (GI) tract, similar to that previously observed in serum. IMPORTANCE Horizontal gene transfer is a major factor in the biology of Enterococcus faecalis , an important nosocomial pathogen. Previous studies showing efficient conjugative plasmid transfer in the gastrointestinal (GI) tracts of experimental animals did

Spontaneous Cerebrospinal Fluid Otorrhea from a Persistent Tympanomeningeal Fissure Presenting as Recurrent Serous Otitis Media

DEFF Research Database (Denmark)

Zakaryan, Arman; Poulsgaard, Lars; Hollander, Camilla

2015-01-01

We describe spontaneous cerebrospinal fluid (CSF) otorrhea through a patent tympanomeningeal (Hyrtl) fissure presenting as recurrent serous otitis media. The CSF leak was observed when a drain was placed through the tympanic membrane by an otologist. The diagnosis was then confirmed by computed...

Enterococcus faecalis Sex Pheromone cCF10 Enhances Conjugative Plasmid Transfer In Vivo

Directory of Open Access Journals (Sweden)

Helmut Hirt

2018-02-01

Full Text Available Cell-cell communication mediated by peptide pheromones (cCF10 [CF] is essential for high-frequency plasmid transfer in vitro in Enterococcus faecalis. To examine the role of pheromone signaling in vivo, we established either a CF-producing (CF+ recipient or a recipient producing a biologically inactive variant of CF (CF− recipient in a germfree mouse model 3 days before donor inoculation and determined transfer frequencies of the pheromone-inducible plasmid pCF10. Plasmid transfer was detected in the upper and middle sections of the intestinal tract 5 h after donor inoculation and was highly efficient in the absence of antibiotic selection. The transconjugant/donor ratio reached a maximum level approaching 1 on day 4 in the upper intestinal tract. Plasmid transfer was significantly lower with the CF− recipient. While rescue of the CF− mating defect by coculture with CF+ recipients is easily accomplished in vitro, no extracellular complementation occurred in vivo. This suggests that most pheromone signaling in the gut occurs between recipient and donor cells in very close proximity. Plasmid-bearing cells (donors plus transconjugants steadily increased in the population from 0.1% after donor inoculation to about 10% at the conclusion of the experiments. This suggests a selective advantage of pCF10 carriage distinct from antibiotic resistance or bacteriocin production. Our results demonstrate that pheromone signaling is required for efficient pCF10 transfer in vivo. In the absence of CF+ recipients, a low level of transfer to CF− recipients occurred in the gut. This may result from low-level host-mediated induction of the donors in the gastrointestinal (GI tract, similar to that previously observed in serum.

Botulinum toxin A injection for chronic anal fissures and anal sphincter spasm improves quality of life in recessive dystrophic epidermolysis bullosa

Directory of Open Access Journals (Sweden)

Cassandra Chaptini, MBBS

2015-12-01

Full Text Available We report a 20-year-old female with generalized, severe, recessive dystrophic epidermolysis bullosa who developed secondary chronic anal fissures. This resulted in anal sphincter spasm and severe, disabling pain. She was treated with five botulinum toxin A injections into the internal anal sphincter over a period of 2 years and gained marked improvement in her symptoms. This case demonstrates the successful use of botulinum toxin A injections to relieve anal sphincter spasm and fissuring, with long-term improvement.

Anorectal pain and irritation: anal fissure, levator syndrome, proctalgia fugax, and pruritus ani.

Science.gov (United States)

Vincent, C

1999-03-01

Anal fissures, proctalgia fugax, levator ani syndrome, and pruritus ani are common causes of anorectal pain and irritation. The clinician who obtains a thorough history and performs a complete examination can accurately diagnose these disorders. Ancillary tests seldom are helpful and rarely are necessary. Most patients suffering from these conditions readily respond to conservative therapy provided in the primary care practitioner's office.

Identification of genetic loci underlying the kernel fissure-resistance exhibited by 'cypress' and 'saber'

Science.gov (United States)

The economic value of broken rice is about half that of whole milled rice, so one goal of producers, millers, and rice breeders is to reduce broken grains that result from the dehusking and milling processes One of the primary causes of rice breakage is fissuring, or cracking, of the rice before it ...

Tensions and Fissures: The Politics of Standardised Testing and Accountability in Ontario, 1995-2015

Science.gov (United States)

Pinto, Laura Elizabeth

2016-01-01

While Ontario has received international accolades for its enactment of province-wide standardised testing upon the formation of the Education Quality and Accountability Office (EQAO), a closer look at provincial assessments over a 20-year span reveals successes as well as systemic tensions and fissures. The purpose of this paper is twofold.…

Radionuclide transport in a single fissure

International Nuclear Information System (INIS)

Eriksen, T.E.

1988-12-01

The study of radionuclide migration through rock is currently of great interest due to its relevance to the possible escape paths into the biosphere of radionuclides released from high level radioactive wastes burried in deep geological repositories. While water will provide the vehicle for transportation, interaction with geological material may greatly influence the radionuclide movement relative that of water. A flow system for laboratory studies of radionuclide transport in natural fissures in granitic rock under reducing conditions is described. The system based on the use of synthetic ground water equilibrated with granitic rock in a well sealed system, allow experiments to be carried out at -240 mV reduction potential. In flow experiments with technetium the retardation was found to be dependent on the method used for reducing TcO 4 - . The preparation of the tracer solutions is crucial, as some of the redox-reactions may be very slow. The dynamics of the Tc(VII) reduction and also speciation need to be carried out in separate experiments. (4 illustrations, 5 tables)

Cystic Fibrosis (CF): Chloride Sweat Test

Science.gov (United States)

... on this topic for: Parents Kids Teens Cystic Fibrosis Cystic Fibrosis and Nutrition Cystic Fibrosis (CF) Respiratory Screen: Sputum Cystic Fibrosis: Diet and Nutrition Cystic Fibrosis Cystic Fibrosis: Diet and Nutrition View more Partner Message ...

Pit and fissure sealants for preventing dental decay in the permanent teeth of children and adolescents

DEFF Research Database (Denmark)

Ahovuo-Saloranta, Anneli; Hiiri, Anne; Nordblad, Anne

2008-01-01

BACKGROUND: Although pit and fissure sealants are effective in preventing caries, their efficacy may be related to the caries prevalence in the population. OBJECTIVES: The primary objective of this review was to evaluate the caries prevention of pit and fissure sealants in children and adolescents...... for comparison of sealant versus sealant. Five split-mouth studies and one parallel group study with 5 to 10 year old children found a significant difference in favour of second or third generation resin-based sealants on first permanent molars, compared to a control without sealant, with a pooled RR of 0.13 (95...... sealant group; 27% of sealed surfaces were decayed compared to 77% of surfaces without sealant.The results of the studies comparing different sealant materials were conflicting. AUTHORS' CONCLUSIONS: Sealing is a recommended procedure to prevent caries of the occlusal surfaces of permanent molars...

Interaction of groundwater and fresh basalt fissure surfaces and its effect on the migration of actinides

International Nuclear Information System (INIS)

Vandegrift, G.F.; Bowers, D.L.; Gerding, T.J.; Fried, S.M.; Wilbur, C.K.; Seitz, M.G.

1983-01-01

Experiments are being performed at Argonne National Laboratory (ANL): (1) to identify interactions of radionuclides and repository components that effect nuclide migration, and (2) to assess changes in nuclide migration caused by modifications expected upon aging of the waste, clay backfill, and rock. The experiments are conducted with radioactive borosilicate glass, bentonite and mechanically fissured basalt rock in flowing water analogous to their configuration in a breach of a nuclear waste repository. Changes undergone by the groundwater as it passed through the fissure include: (1) drop in pH from 10 to 8, (2) loss of suspended particulate, and (3) loss of dissolved/suspended U, Np, and Pu. These effects, also studied as functions of radiation dose and of laboratory aging of the repository components, are related to the predicted long-term performance of a nuclear waste repository

Clinical, manometric, and ultrasonographic results of pneumatic balloon dilatation vs. lateral internal sphincterotomy for chronic anal fissure: a prospective, randomized, controlled trial.

Science.gov (United States)

Renzi, Adolfo; Izzo, Domenico; Di Sarno, Giandomenico; Talento, Pasquale; Torelli, Francesco; Izzo, Giuseppe; Di Martino, Natale

2008-01-01

This prospective, randomized, controlled trial was designed to compare the clinical, functional, and morphologic results of pneumatic balloon dilatation with lateral internal sphincterotomy for the treatment of chronic anal fissure. All patients with symptomatic chronic anal fissure were randomly assigned to pneumatic balloon dilatation or lateral internal sphincterotomy and invited to complete a standardized questionnaire inquiring about their symptoms. Anal ultrasonography and anal manometry were performed before and six months after surgery. A proctologic examination was performed between the fifth and sixth postoperative weeks. Anal continence, scored by using a validated continence grading scale, was evaluated preoperatively at 1 and 6 weeks and at 12 and 24 months. Fifty-three patients, who satisfied selection criteria, were enrolled in the trial. Four patients (7.5 percent) were lost to follow-up. Twenty-four patients (11 males; mean age, 42 +/- 8.2 years) underwent pneumatic balloon dilatation and 25 patients (10 males; mean age, 44 +/- 7.3 years) underwent lateral internal sphincterotomy. Fissure-healing rates were 83.3 percent in the pneumatic balloon dilatation and 92 percent in the lateral internal sphincterotomy group. Recurrent anal fissure was observed in one patient (4 percent) after lateral internal sphincterotomy. At anal manometry, mean resting pressure decrements obtained after pneumatic balloon dilatation and lateral internal sphincterotomy were 30.5 and 34.3 percent, respectively. After pneumatic balloon dilatation, anal ultrasonography did not show any significant sphincter damage. At 24-month follow-up, the incidence of incontinence, irrespective of severity, was 0 percent in the pneumatic balloon dilatation group and 16 percent in the lateral internal sphincterotomy group (P < 0.0001). As lateral internal sphincterotomy, pneumatic balloon dilatation grants a high anal fissure-healing rate but with a statistically significant reduction in

Parents' Attitude towards the Use of Fluorides and Fissure Sealants and its Effect on their Children's Oral Health.

Science.gov (United States)

Blumer, Sigalit; Ratson, Tal; Peretz, Benjamin; Dagon, Nurit

To characterize the attitudes of Israeli parents towards caries preventive measures. participating parents completed a 21-item questionnaire on their demographics, dental history, attitudes and satisfaction from fluorides and fissure sealants. One hundred parents (average age 41.62±4.9 years, 85 females) participated. Most of the parents (88% of the mothers and 84% of the fathers) had an academic education. Most of the parents (54%) had a favorable attitude towards the use of fluoridated gels, while only 37% of them had a positive opinion regarding fluoridated water. The satisfaction levels were very high regarding fissure sealants, fluoridated mouth rinses and fluoridated gels (78.1%, 73.6% and 72.5% respectively). The satisfaction from fluoridated water was split almost equally (50.8% were 'pleased' and 49.2% 'not pleased'). The main source for parental oral health knowledge was the dentist (83%). Parents' attitude towards caries preventive measures was significantly correlated to their gender, dental experience, level of education and the number of children in the family. positive attitude towards caries preventive measures was found among parents with higher awareness for preventive oral health measures and among bigger families. Mothers were more positive about fissure sealants than fathers. Mothers with up to 12 years of education tended to have a positive opinion regarding water fluoridation.

Testing Moderating Detection Systems with 252Cf-Based Reference Neutron Fields

International Nuclear Information System (INIS)

Hertel, Nolan E.; Sweezy, Jeremy; Sauber, Jeremiah S.; Vaughn, David; Cook, Andrew; Tays, Jeff; Ro, Tae-Ik

2001-01-01

Calibration measurements were carried out on a probe designed to measure ambient dose equivalent in accordance with ICRP Pub 60 recommendations. It consists of a cylindrical 3 He proportional counter surrounded by a 25-cm-diameter spherical polyethylene moderator. Its neutron response is optimized for dose rate measurements of neutrons between thermal energies and 20 MeV. The instrument was used to measure the dose rate in four separate neutron fields: unmoderated 252 Cf, D 2 O-moderated 252 Cf, polyethylene-moderated 252 Cf, and WEP neutron howitzer with 252 Cf at its center. Dose equivalent measurements were performed at source-detector centerline distances from 50 to 200 cm. The ratio of air-scatter- and room-return-corrected ambient dose equivalent rates to ambient dose equivalent rates calculated with the code MCNP are tabulated

Rate constants for the reaction of CF3O radicals with hydrocarbons at 298 K

DEFF Research Database (Denmark)

Kelly, C.; Treacy, J.; Sidebottom, H.W.

1993-01-01

Rate constant ratios of the reactions of CF3O radicals with a number of hydrocarbons have been determined at 298 +/- 2 K and atmospheric pressure using a relative rate method. Using a previously determined value k(CF30 + C2H6) = 1.2 x 10(-12) cm3 molecule-1 s-1 these rate constant ratios provide...... estimates of the rate constants: k(CF3O + CH4) = (1.2 +/- 0.1) x 10(-14), k(CF3O + c-C3H6) = (3.6 +/- 0.2) x 10(-13), k(CF3O + C3H8) = (4.7 +/- 0.7) x 10(-12), k(CF3O + (CH3)3CH) = (7.2 +/- 0.5) x 10(-12), k(CF3O + C2H4) = (3.0 +/- 0.1) x 10(-11) and k(CF3O + C6H6) = (3.6 +/- 0.1) x 10(-11) cm3 molecule-1 s......-1. The importance of the reactions of CF3O radicals with hydrocarbons under atmospheric conditions is discussed....

Reproductive Toxicity Screen of Trifluoroiodomethane (CF31) in Sprague-Dawley Rats

National Research Council Canada - National Science Library

Dodd, Darol

1998-01-01

.... The purpose of this study was to determine and evaluate the potential for CF3I to produce reproductive toxicity and to provide additional information on the effect of CF3I exposure on the thyroid...

Assessment of CF lung disease using motion corrected PROPELLER MRI: a comparison with CT

Energy Technology Data Exchange (ETDEWEB)

Ciet, Pierluigi [General Hospital Ca' Foncello, Radiology Department, Treviso (Italy); Sophia Children' s Hospital, Pediatric Pulmonology Erasmus MC, Rotterdam (Netherlands); Erasmus MC, Radiology, Rotterdam (Netherlands); Serra, Goffredo; Catalano, Carlo [University of Rome ' ' Sapienza' ' , Radiology, Rome (Italy); Bertolo, Silvia; Morana, Giovanni [General Hospital Ca' Foncello, Radiology Department, Treviso (Italy); Spronk, Sandra [Erasmus MC, Radiology, Rotterdam (Netherlands); Erasmus MC, Epidemiology, Rotterdam (Netherlands); Ros, Mirco [Ca' Foncello Hospital, Pediatrics, Treviso (Italy); Fraioli, Francesco [University College London (UCL), Institute of Nuclear Medicine, London (United Kingdom); Quattrucci, Serena [University of Rome Sapienza, Pediatrics, Rome (Italy); Assael, M.B. [Azienda Ospedaliera di Verona, Verona CF Center, Verona (Italy); Pomerri, Fabio [University of Padova, Department of Medicine-DIMED, Padova (Italy); Tiddens, Harm A.W.M. [Sophia Children' s Hospital, Pediatric Pulmonology Erasmus MC, Rotterdam (Netherlands); Erasmus MC, Radiology, Rotterdam (Netherlands)

2016-03-15

To date, PROPELLER MRI, a breathing-motion-insensitive technique, has not been assessed for cystic fibrosis (CF) lung disease. We compared this technique to CT for assessing CF lung disease in children and adults. Thirty-eight stable CF patients (median 21 years, range 6-51 years, 22 female) underwent MRI and CT on the same day. Study protocol included respiratory-triggered PROPELLER MRI and volumetric CT end-inspiratory and -expiratory acquisitions. Two observers scored the images using the CF-MRI and CF-CT systems. Scores were compared with intra-class correlation coefficient (ICC) and Bland-Altman plots. The sensitivity and specificity of MRI versus CT were calculated. MRI sensitivity for detecting severe CF bronchiectasis was 0.33 (CI 0.09-0.57), while specificity was 100 % (CI 0.88-1). ICCs for bronchiectasis and trapped air were as follows: MRI-bronchiectasis (0.79); CT-bronchiectasis (0.85); MRI-trapped air (0.51); CT-trapped air (0.87). Bland-Altman plots showed an MRI tendency to overestimate the severity of bronchiectasis in mild CF disease and underestimate bronchiectasis in severe disease. Motion correction in PROPELLER MRI does not improve assessment of CF lung disease compared to CT. However, the good inter- and intra-observer agreement and the high specificity suggest that MRI might play a role in the short-term follow-up of CF lung disease (i.e. pulmonary exacerbations). (orig.)

Assessment of CF lung disease using motion corrected PROPELLER MRI: a comparison with CT

International Nuclear Information System (INIS)

Ciet, Pierluigi; Serra, Goffredo; Catalano, Carlo; Bertolo, Silvia; Morana, Giovanni; Spronk, Sandra; Ros, Mirco; Fraioli, Francesco; Quattrucci, Serena; Assael, M.B.; Pomerri, Fabio; Tiddens, Harm A.W.M.

2016-01-01

To date, PROPELLER MRI, a breathing-motion-insensitive technique, has not been assessed for cystic fibrosis (CF) lung disease. We compared this technique to CT for assessing CF lung disease in children and adults. Thirty-eight stable CF patients (median 21 years, range 6-51 years, 22 female) underwent MRI and CT on the same day. Study protocol included respiratory-triggered PROPELLER MRI and volumetric CT end-inspiratory and -expiratory acquisitions. Two observers scored the images using the CF-MRI and CF-CT systems. Scores were compared with intra-class correlation coefficient (ICC) and Bland-Altman plots. The sensitivity and specificity of MRI versus CT were calculated. MRI sensitivity for detecting severe CF bronchiectasis was 0.33 (CI 0.09-0.57), while specificity was 100 % (CI 0.88-1). ICCs for bronchiectasis and trapped air were as follows: MRI-bronchiectasis (0.79); CT-bronchiectasis (0.85); MRI-trapped air (0.51); CT-trapped air (0.87). Bland-Altman plots showed an MRI tendency to overestimate the severity of bronchiectasis in mild CF disease and underestimate bronchiectasis in severe disease. Motion correction in PROPELLER MRI does not improve assessment of CF lung disease compared to CT. However, the good inter- and intra-observer agreement and the high specificity suggest that MRI might play a role in the short-term follow-up of CF lung disease (i.e. pulmonary exacerbations). (orig.)

Neutron Spectra, Fluence and Dose Rates from Bare and Moderated Cf-252 Sources

Energy Technology Data Exchange (ETDEWEB)

Radev, Radoslav P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-04-01

A new, stronger ²⁵²Cf source (serial number SR-CF-3050-OR) was obtained from Oak Ridge National Laboratory (ORNL) in 2014 to supplement the existing ²⁵²Cf sources which had significantly decayed. A new instrument positioning track system was designed and installed by Hopewell Designs, Inc. in 2011. The neutron field from the new, stronger ²⁵²Cf source in the modified calibration environment needed to be characterized as well as the modified neutron fields produced by the new source and seven different neutron moderators. Comprehensive information about our ²⁵²Cf source, its origin, production, and isotopic content and decay characteristics needed to be compiled as well. This technical report is intended to address these issues.

Comparative study of electroless nickel film on different organic acids modified cuprammonium fabric (CF)

Energy Technology Data Exchange (ETDEWEB)

Zhao, Hang; Lu, Yinxiang, E-mail: yxlu@fudan.edu.cn

2016-01-30

Graphical abstract: - Highlights: • An etchant-free and moderate surface pre-treatment process was studied. • Citric acid, malic acid and oxalic acid were selected as modification agents. • High adhesive nickel coating on cuprammonium fabric was obtained. • The electromagnetic parameters were evaluated from the experimental data. - Abstract: Nickel films were grown on citric acid (CA), malic acid (MA) and oxalic acid (OA) modified cuprammonium fabric (CF) substrates via electroless nickel deposition. The nickel films were examined using scanning electron microscopy (SEM) and X-ray diffraction (XRD). Their individual deposition rate and electromagnetic interference (EMI) shielding effectiveness (SE) were also investigated to compare the properties of electroless nickel films. SEM images illustrated that the nickel film on MA modified CF substrate was smooth and uniform, and the density of nickel nuclei was much higher. Compared with that of CA modified CF, the coverage of nickel nuclei on OA and MA modified CF substrate was very limited and the nickel particles size was too big. XRD analysis showed that the nickel films deposited on the different modified CF substrates had a structure with Ni (1 1 1) preferred orientation. All the nickel coatings via different acid modification were firmly adhered to the CF substrates, as demonstrated by an ultrasonic washing test. The result of tensile test indicated that the electroless nickel plating on CF has ability to strengthen the CF substrate while causes limited effect on tensile elongation. Moreover, the nickel film deposited on MA modified CF substrate showed more predominant in EMI SE than that deposited on CA or OA modified CF.

Isotope techniques in the study of the hydrology of fractured and fissured rocks

International Nuclear Information System (INIS)

1989-01-01

It is generally agreed that the hydrology of fractured rocks refers to the occurrence and movement of groundwater in rocks whose porosity is due to cracks, fissures and fractures in compact rocks. Until recently, crystalline rocks were considered to be impervious (the role of karst reservoirs for groundwater storage is already known). Thus, although fractured rocks cover approximately one-third of the Earth's surface, knowledge of groundwater flow dynamics still needs to be substantively improved. The Proceedings include the papers presented at the Advisory Group Meeting on the Application of Isotope Techniques in the Study of the Hydrology of Fractured and Fissured Rocks, which took place in Vienna from 17 to 21 November 1986. The meeting was attended by 21 scientists from 10 Member States. The Group agreed that the following topics should be given the highest priority: (1) Protection of groundwater resources should be incorporated into all future activities. This implies that recharge areas have to be delineated, not only using nuclear techniques but also other hydrogeological and geochemical methods. Research efforts in this direction should be intensified. (2) The Group was aware that new isotope techniques are being developed in hydrogeology and agreed that their application in fractured and fissured rocks showed promise. It was therefore suggested that information on new isotopes such as 36 Cl and 129 I should be gathered, either in the form of the various techniques currently being used by different laboratories or through the various activities that are being undertaken. Ways of co-ordinating the work being done and exchanging information at the international level should be encouraged. The Proceedings should be of interest to scientists responsible for the evaluation of water resources in crystalline rocks. It is hoped that hydrologists and hydrogeologists working in such terrains who are not familiar with the use of isotope techniques will find ideas and

76 FR 68634 - Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines

Science.gov (United States)

2011-11-07

... Airworthiness Directives; General Electric Company (GE) CF6 Turbofan Engines AGENCY: Federal Aviation... ``(c) This AD applies to * * * and CF6-80A3 turbofan engines with left-hand links * * *.'' to ``(c) This AD applies to * * * and CF6-80A3 turbofan engines, including engines marked on the engine data...

Neutron shielding for a 252 Cf source

International Nuclear Information System (INIS)

Vega C, H.R.; Manzanares A, E.; Hernandez D, V.M.; Eduardo Gallego, Alfredo Lorente

2006-01-01

To determine the neutron shielding features of water-extended polyester a Monte Carlo study was carried out. Materials with low atomic number are predominantly used for neutron shielding because these materials effectively attenuate neutrons, mainly through inelastic collisions and absorption reactions. During the selection of materials to design a neutron shield, prompt gamma production as well as radionuclide production induced by neutron activation must be considered. In this investigation the Monte Carlo method was used to evaluate the performance of a water-extended polyester shield designed for the transportation, storage, and use of a 252 Cf isotopic neutron source. During calculations a detailed model for the 252 Cf and the shield was utilized. To compare the shielding features of water extended polyester, the calculations were also made for the bare 252 Cf in vacuum, air and the shield filled with water. For all cases the calculated neutron spectra was utilized to determine the ambient equivalent neutron dose at four sites around the shielding. In the case of water extended polyester and water shielding the calculations were extended to include the prompt gamma rays produced during neutron interactions, with this information the Kerma in air was calculated at the same locations where the ambient equivalent neutron dose was determined. (Author)

OligoG CF-5/20 normalizes cystic fibrosis mucus by chelating calcium.

Science.gov (United States)

Ermund, Anna; Recktenwald, Christian V; Skjåk-Braek, Gudmund; Meiss, Lauren N; Onsøyen, Edvar; Rye, Philip D; Dessen, Arne; Myrset, Astrid Hilde; Hansson, Gunnar C

2017-06-01

The goal of this study was to determine whether the guluronate (G) rich alginate OligoG CF-5/20 (OligoG) could detach cystic fibrosis (CF) mucus by calcium chelation, which is also required for normal mucin unfolding. Since bicarbonate secretion is impaired in CF, leading to insufficient mucin unfolding and thereby attached mucus, and since bicarbonate has the ability to bind calcium, we hypothesized that the calcium chelating property of OligoG would lead to detachment of CF mucus. Indeed, OligoG could compete with the N-terminus of the MUC2 mucin for calcium binding as shown by microscale thermophoresis. Further, effects on mucus thickness and attachment induced by OligoG and other alginate fractions of different length and composition were evaluated in explants of CF mouse ileum mounted in horizontal Ussing-type chambers. OligoG at 1.5% caused effective detachment of CF mucus and the most potent alginate fraction tested, the poly-G fraction of about 12 residues, had similar potency compared to OligoG whereas mannuronate-rich (M) polymers had minimal effect. In conclusion, OligoG binds calcium with appropriate affinity without any overt harmful effect on the tissue and can be exploited for treating mucus stagnation. © 2017 John Wiley & Sons Australia, Ltd.

Randomized clinical trial assessing the side-effects of glyceryl trinitrate and diltiazem hydrochloride in the treatment of chronic anal fissure.

Science.gov (United States)

Kocher, H M; Steward, M; Leather, A J M; Cullen, P T

2002-04-01

Glyceryl trinitrate (GTN) ointment (0 small middle dot2 per cent) has an efficacy of up to 68 per cent in healing chronic anal fissure, but with headache as a major side-effect. Diltiazem hydrochloride (DTZ) cream (2 per cent) is expected to have fewer side-effects. A prospective double-blind randomized two-centre trial requiring at least 26 patients in each group (alpha = 0.05, beta = 0.9) was instituted after approval of the local ethics committee, to compare the incidence of side-effects (primary endpoint) with 0.2 per cent GTN ointment and 2 per cent DTZ cream in the treatment of chronic anal fissure. Treatments were applied perianally, twice daily for 6-8 weeks. All patients gave written informed consent. Both groups were comparable in patient demographics and clinical characteristics. Twelve patients violated the protocol, withdrew or did not attend follow-up. There were more side-effects with GTN (21 of 29 patients) than with DTZ (13 of 31) (relative risk (RR) 1.84 (95 per cent confidence interval (c.i.) 1.11 to 3.04), P = 0.01). In particular, more headaches occurred with GTN (17 of 29 patients) than with DTZ (eight of 31) (RR 2.06 (95 per cent c.i. 1.18 to 3.59), P = 0.01). There were no significant differences in healing and symptomatic improvement rates between patients receiving GTN (25 of 29) and DTZ (24 of 31). DTZ cream caused substantially fewer headaches than GTN ointment. There was no significant difference in the healing or improvement of chronic anal fissure between the treatments. DTZ may be the preferred first-line treatment for chronic anal fissure.

Blurring of the vessels of the interhemispheric fissure in multislice CT angiography: a sign of meningeal carcinomatosis

International Nuclear Information System (INIS)

Ertl-Wagner, Birgit B.; Hoffmann, Ralf-Thorsten; Herrmann, Karin; Reiser, Maximilian F.; Bruening, Roland; Dichgans, Martin

2004-01-01

Meningeal carcinomatosis remains a challenging diagnosis to make, with both cerebrospinal fluid (CSF) analysis and radiological methods having a limited sensitivity. We aimed at describing a possible diagnostic sign of multislice CT angiography (MS-CTA) in the diagnosis of meningeal carcinomatosis. Upon retrospective analysis of MSCT angiographies of the brain, a conspicuous sign of the vessels of the interhemispheric fissure was noted in five patients. Cranial MSCT angiographies were performed with a standardized protocol (120 kV, 200 mA s, collimation of 4 x 1 mm, table feed per rotation 4 mm). We injected 120 ml of nonionic contrast medium as a bolus, and data acquisition was started after a fixed delay of 35 s. In order to elucidate the finding, correlation with clinical follow-up and/or CSF findings was performed for all patients. In five patients there was a blurring, an increased number, and a pathologic configuration of the vessels of the interhemispheric fissure. All five patients with this sign had clinical signs and symptoms of meningeal carcinomatosis. Three patients had positive CSF cytology, one further patient had follow-up spinal MRI 6 weeks later demonstrating meningeal carcinomatosis. One patient declined lumbar puncture. MS-CTA has the capacity to demonstrate a pathologic configuration of the vessels of the interhemispheric fissure in patients with meningeal carcinomatosis. This sign may serve as an indicator of meningeal carcinomatosis and should raise the suspicion of this disease entity. (orig.)

Mini-guts in a dish: Perspectives of adult Cystic Fibrosis (CF) patients and parents of young CF patients on organoid technology.

Science.gov (United States)

Boers, Sarah N; de Winter-de Groot, Karin M; Noordhoek, Jacquelien; Gulmans, Vincent; van der Ent, Cornelis K; van Delden, Johannes J M; Bredenoord, Annelien L

2018-03-06

Organoid technology enables the cultivation of human tissues in a dish. Its precision medicine potential could revolutionize the Cystic Fibrosis (CF) field. We provide a first thematic exploration of the patient perspective on organoid technology to set the further research agenda, which is necessary for responsible development of this ethically challenging technology. 23 semi-structured qualitative interviews with 14 Dutch adult CF patients and 12 parents of young CF patients to examine their experiences, opinions, and attitudes regarding organoid technology. Four themes emerged: (1) Respondents express a close as well as a distant relationship to organoids; (2) the open-endedness of organoid technology sparks hopes and concerns, (3) commercial use evokes cautiousness. (4) Respondents mention the importance of sound consent procedures, long-term patient engagement, responsible stewardship, and stringent conditions for commercial use. The precision medicine potential of organoid technology can only be realized if the patient perspective is taken adequately into account. Copyright © 2018 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

Brome isotope selective control of CF3Br molecule clustering by IR laser radiation in gas-dynamic expansion of CF3Br - Ar mixture

Science.gov (United States)

Apatin, V. M.; Lokhman, V. N.; Makarov, G. N.; Ogurok, N.-D. D.; Ryabov, E. A.

2018-02-01

We report the results of research on the experimental control of CF3Br molecule clustering under gas-dynamic expansion of the CF3Br - Ar mixture at a nozzle exit by using IR laser radiation. A cw CO2 laser is used for exciting molecules and clusters in the beam and a time-of-flight mass-spectrometer with laser UV ionisation of particles for their detection. The parameters of the gas above the nozzle are determined (compositions and pressure) at which intensive molecule clustering occurs. It is found that in the case of the CF3Br gas without carrier when the pressure P0 above the nozzle does not exceed 4 atm, molecular clusters actually are not generated in the beam. If the gas mixture of CF3Br with argon is used at a pressure ratio 1 : N, where N >= 3, and the total pressure above the nozzle is P0 >= 2 atm, then there occurs molecule clustering. We study the dependences of the efficiency of suppressing the molecule clustering on parameters of the exciting pulse, gas parameters above the nozzle, and on a distance of the molecule irradiation zone from the nozzle exit section. It is shown that in the case of resonant vibrational excitation of gas-dynamically cooled CF3Br molecules at the nozzle exit one can realise isotope-selective suppression of molecule clustering with respect to bromine isotopes. With the CF3Br - Ar mixtures having the pressure ratio 1 : 3 and 1 : 15, the enrichment factors obtained with respect to bromine isotopes are kenr ≈ 1.05 ± 0.005 and kenr ≈ 1.06 ± 0.007, respectively, under jet irradiation by laser emission in the 9R(30) line (1084.635 cm-1). The results obtained let us assume that this method can be used to control clustering of molecules comprising heavy element isotopes, which have a small isotopic shift in IR absorption spectra.

Endosonographic and manometric evaluation of internal anal sphincter in patients with chronic anal fissure and its correlation with clinical outcome after topical glyceryl trinitrate therapy.

Science.gov (United States)

Pascual, Marta; Pera, Miguel; Courtier, Ricard; Gil, Mariá José; Parés, David; Puig, Sonia; Andreu, Montserrat; Grande, Luis

2007-08-01

Anorectal pressure studies have demonstrated internal anal sphincter (IAS) hypertonia in patients with chronic anal fissure. It is unknown however, if these changes in IAS function are associated with any abnormality in sphincter morphology. The first aim was to investigate the clinical characteristics and the manometric and endosonographic findings of the IAS in a cohort of patients with chronic anal fissure. The second aim was to investigate the association between these findings and the outcome with topical Glyceryl trinitrate (GTN) therapy. All patients who presented with chronic anal fissure from November 1999 to May 2004 were included after failure of conservative therapy. Anorectal manometry and anal endosonography were performed before treatment with 0.2% GTN ointment twice daily was initiated. Patients were evaluated after 8 weeks. One hundred and twenty-four patients (66 women, mean age, 45.2 +/- 14.8 years) were included. Hypertonia of the IAS was found in 84 (68%) patients. The mean maximum IAS thickness was 3.6 +/- 0.76 mm (1.6-5.5). An abnormally thick IAS, adjusted by age, was observed in 113 (91.1%) patients. We found no correlation between resting pressure and IAS thickness (r = 0.074; p = 0.41). At 8 weeks, 52 patients (42%) had healed with complete symptoms resolution. No statistically significant differences were observed when clinical features and manometric and endosonographic findings were compared between healing and no-healing fissures. The majority of patients with chronic anal fissure present an abnormally thick IAS. Clinical, manometric and endosonographic features had no association with outcome after GTN treatment.

Radiation ulcers in patients with cancer of the torgue after 252Cf therapy

International Nuclear Information System (INIS)

Galantseva, G.F.; Guseva, L.I.; Plichko, V.I.

1984-01-01

Interstitial therapy with 252 Cf was conducted for 57 patients with cancer of the tongue. It was established that clinical course of radiation tungue ulcers after interstitial therapy with 252 Cf doesn't differ sufficiently from the course of radiation injuries, occurring after γ-radiation application. Radiation ulcers are often observed in patients after the treatment of recurrent and residual tumors with 252 Cf (in 33% of patients); the ulcers appeared in 15% of cases in patients after the treatment of initial ulcers tumors. Conservative treatment provide the cure of radiation tongUe ulcers after interstitial therapy with 252 Cf

Capillary Discourses, Fissure Points, and Tacitly Confessing the Self: Foucault's Later Work and Educational Research

Science.gov (United States)

Worthman, Christopher; Troiano, Beverly

2016-01-01

This article draws on Foucault's later work to consider in an exploratory but specific way how that work can inform educational research. It introduces the concepts of "capillary discourses" and "fissure points" to show, by way of example, how a regime of truth such as neoliberalism shapes lifelong learning theory, the pedagogy…

Improving the care of patients with cystic fibrosis (CF)

Science.gov (United States)

Khan, Ahsan Aftab; Nash, Edward F; Whitehouse, Joanna; Rashid, Rifat

2017-01-01

Background The West Midlands Adult Cystic Fibrosis (CF) Centre based at Birmingham Heartlands Hospital provides care for adults with CF in the West Midlands. People with CF are prone to pulmonary exacerbations, which often require inpatient admission for intravenous antibiotics. We observed that the admission process was efficient during working hours (9:00–17:00, Monday–Friday) when the CF team are routinely available, but out-of-working hours, there were delays in these patients being clerked and receiving their first antibiotic dose. We were concerned that this was resulting in quality and potential safety issues by causing delays in starting treatment and prolonging hospital inpatient stays. We therefore undertook a quality improvement project (QIP) aimed at addressing these issues. An initial survey showed median time to clerk of 5 hours, with 60% of patients missing their first dose of antibiotics and mean length of stay of 16 days. Methods We applied the Plan-Do-Study-Act (PDSA) cycle approach, with the first PDSA cycle involving raising awareness of the issue through education to doctors, nurses and patients. Results This led to a reduction of median time to clerk from 5 to 2 hours with 23% of patients missing their first antibiotic dose and mean length of stay reducing to 14 days. The second cycle involved introducing an admissions checklist and displaying education posters around the hospital, resulting in median time to clerk remaining at 2 hours but only 20% of patients missing their first antibiotic dose and the mean length of stay remaining at 14 days. Conclusion This QIP has improved the out-of-hours admissions process for adults with CF in our centre. We plan to review the longer term effects of the project including sustainability, effects on clinical outcomes and patient satisfaction. PMID:28959778

Open versus closed lateral internal anal sphincterotomy in the management of chronic anal fissures: A prospective randomized study

Directory of Open Access Journals (Sweden)

Vivek Gupta

2014-10-01

Conclusion: Closed lateral internal sphincterotomy is the treatment of choice for chronic fissures as it is effective, safe, less expensive, and associated with a lower rate of complications than the open sphincterotomy technique.

Corrosion of Continuous Fiber Reinforced Aluminum Metal Matrix Composites (CF-AMCs)

Science.gov (United States)

Tiwari, Shruti

The first objective of this research is to study the atmospheric corrosion behavior of continuous reinforced aluminum matrix composites (CF-AMCs). The materials used for this research were alumina (Al2O3) and nickel (Ni) coated carbon (C) fibers reinforced AMCs. The major focus is to identify the correlation between atmospheric parameters and the corrosion rates of CF-AMCs in the multitude of microclimates and environments in Hawai'i. The micro-structures of CF-AMCs were obtained to correlate the microstructures with their corrosion performances. Also electrochemical polarization experiments were conducted in the laboratory to explain the corrosion mechanism of CF-AMCs. In addition, CF-AMCs were exposed to seven different test sites for three exposure periods. The various climatic conditions like temperature (T), relative humidity (RH), rainfall (RF), time of wetness (TOW), chloride (Cl- ) and sulfate (SO42-) deposition rate, and pH were monitored for three exposure period. Likewise, mass losses of CF-AMCs at each test site for three exposure periods were determined. The microstructure of the CF-AMCS showed that Al/C/50f MMCs contained a Ni-rich phase in the matrix, indicating that the Ni coating on the C fiber dissolved in the matrix. The intermetallic phases obtained in Al-2wt% Cu/Al 2O3/50f-T6 MMC and Al-2wt%-T6 monolith were rich in Cu and Fe. The intermetallic phases obtained in Al 7075/Al2O3/50f-T6 MMC and Al 7075-T6 monolith also contained traces of Mg, Zn, Ni, and Si. Electrochemical polarization experiment indicated that the Al/Al 2O3/50f Al-2wt% Cu/Al2O3/50f-T6 and Al 7075/Al2O3/50f-T6 MMC showed similar corrosion trends as their respective monoliths pure Al, Al-2wt%-T6 and Al 7075-T6 in both aerated and deaerated condition. Al2O3 fiber, being an insulator, did not have a great effect on the polarization behavior of the composites. Al/C/50f MMCs corroded at a much faster rate as compared to pure Al monolith due to the galvanic effect between C and Al

Prevalence of Dental Caries and Fissure Sealants in a Portuguese Sample of Adolescents

Science.gov (United States)

Veiga, Nélio J.; Pereira, Carlos M.; Ferreira, Paula C.; Correia, Ilidio J.

2015-01-01

Introduction The aims of this study were to assess the prevalence of dental caries and the DMFT index, as well as the distribution pattern of pit and fissure sealants on permanent teeth in a Portuguese sample of adolescents, and to assess whether the existing usage of sealants and socio-demographic factors are correlated to caries prevalence on the examined sample. Materials and Methods A cross-sectional study was designed with a sample of 447 adolescents aged 12 to 18 years old, attending a public school in Sátão, Portugal. A self-administered questionnaire with questions about oral health behaviours and socio-economic status was answered by adolescents in the classroom. Clinical examination of oral health status and assessment of fissure sealants were accomplished by only one trained member of the research team. Results We obtained a DMFT index of 3.32 (2.92), which indicates a moderate level of prevalence of dental caries. When considering a DMFT = 0, we found significant statistical differences between the parents´ level of education (≤ 4th grade = 26.3 vs 5th–12th grade = 18.8 vs Portuguese adolescents. The establishment of a more targeted preventive program with better and more effective oral health education is essential, having into account socio-demographic aspects. PMID:25803849

Role of excited CF₃CFHO radicals in the atmospheric chemistry of HFC-134a

DEFF Research Database (Denmark)

Wallington, T.J.; Hurley, M.D.; Fracheboud, J.M.

1996-01-01

with Oz, CF3CFHO + O-2 --> CF3C(O)F + HO2, and decomposition via C-C bond scission, CF3CFHO + M --> CS3 + HC(O)F + M. CF3CFHO radicals were produced by two different reactions: either via the self-reaction of CF3CFHO2 radicals or via the CF3CFHO2 + NO reaction. It was found that decomposition was much...

CF3SF5 : a ‘super’ greenhouse gas

OpenAIRE

Tuckett, R. P.

2008-01-01

One molecule of the anthropogenic pollutant trifluoromethyl sulphur pentafluoride (CF\\(_3\\)SF\\(_5\\)), an adduct of the CF\\(_3\\) and SF\\(_5\\) free radicals, causes more global warming than one molecule of any other greenhouse gas yet detected in the Earth’s atmosphere. That is, it has the highest per molecule radiative forcing of any greenhouse pollutant, and the value of its global warming potential is only exceeded by that of SF\\(_6\\). First, the greenhouse effect is described, the propertie...

Study of the 249-251Cf + 48Ca reactions: recent results and outlook

Science.gov (United States)

Voinov, A. A.; Oganessian, Yu Ts; Abdullin, F. Sh; Brewer, N. T.; Dmitriev, S. N.; Grzywacz, R. K.; Hamilton, J. H.; Itkis, M. G.; Miernik, K.; Polyakov, A. N.; Roberto, J. B.; Rykaczewski, K. P.; Sabelnikov, A. V.; Sagaidak, R. N.; Shirokovsky, I. V.; Shumeiko, M. V.; Stoyer, M. A.; Subbotin, V. G.; Sukhov, A. M.; Tsyganov, Yu S.; Utyonkov, V. K.; Vostokin, G. K.

2018-02-01

Experiment aiming at the synthesis of heavy isotopes of Z=118 (Og) using beam of 48Ca and a target of 249-251Cf was undertaken in October 2015 - April 2016 employing the Dubna Gas-Filled Recoil Separator (FLNR JINR). The target of mixed isotopes of 249-251Cf (50.7% of 249Cf, 12.9% of 250Cf, and 36.4% of 251Cf) was irradiated by 48Ca ions at two beam energies of 252 and 258 MeV with the corresponding accumulated beam doses of 1.6×1019 and 1.1×1019. A single event observed at lower beam energy was assigned to the isotope 294Og, the product of the reaction 249Cf(48Ca, 3n); its decay pattern and the observed radioactive properties of the nuclides in the decay chain reproduce in full those observed for 294Og in our earlier experiments of 2002-2005 and 2012. At higher beam energy we observed no decay chains that could be attributed to the isotopes of Og. The possibility of renewal of this experiment in the future is discussed.

Yields of fission products produced by thermal-neutron fission of 249Cf

International Nuclear Information System (INIS)

Dickens, J.K.; McConnell, J.W.

1981-01-01

Absolute yields have been determined for 107 gamma rays emitted in the decay of 97 fission products representing 54 mass chains created during thermal-neutron fission of 249 Cf. These results include 14 mass chains for which no prior yield data exist. Using a Ge(Li) detector, spectra were obtained of gamma rays emanating from a 0.4 μg sample of 249 Cf between 45 s and 0.4 yr after very short irradiations of the 249 Cf by thermal neutrons. On the basis of measured gamma-ray yields and known nuclear data, total chain mass yields and relative uncertainties were obtained for 51 masses between 89 and 156. The absolute overall normalization uncertainty is approx.8%. The measured A-chain cumulative yields make up 77% of the total light mass (A 249 Cf

235Cf anti ν discrepancy and the sulfur discrepancy

International Nuclear Information System (INIS)

Smith, J.R.

1979-01-01

The cantankerous discrepancy among measured values of anti ν for 235 Cf appears at last to be nearing a final resolution. A recent review has summarized the progress that has been achieved through revaluation upward by 0.5% of two manganese bath values anti ν and the performance of a new liquid scintillator measurement. A new manganese bath measurement at INEL is in reasonably good agreement with previous manganese bath values of 235 Cf anti ν. It now appears that the manganese bath values could still be systematically low by as much as 0.4% because the BNL-325 thermal absorption cross section for sulfur may be as much as 10% low. There is a bona fide discrepancy between measurements of the sulfur cross section by pile oscillators and the values derived from transmission measurements. The resolution of this discrepancy is a prerequisite to the final resolution of the 235 Cf anti ν discrepancy. 22 references

Etching properties of BLT films in CF4/Ar plasma

International Nuclear Information System (INIS)

Kim, Dong Pyo; Kim, Kyoung Tae; Kim, Chang Il

2003-01-01

CF 4 /Ar plasma mass content and etching rate behavior of BLT thin films were investigated in inductively coupled plasma (ICP) reactor as functions of CF 4 /Ar gas mixing ratio, rf power, and dc bias voltage. The variation of relative volume densities for F and Ar atoms were measured by the optical emission spectroscopy (OES). The etching rate as functions of Ar content showed the maximum of 803 A/min at 80 % Ar addition into CF 4 plasma. The presence of maximum etch rate may be explained by the concurrence of two etching mechanisms such as physical sputtering and chemical reaction. The role of Ar ion bombardment includes destruction of metal (Bi, La, Ti)-O bonds as well as support of chemical reaction of metals with fluorine atoms

Radionuclide 252Cf neutron source

International Nuclear Information System (INIS)

Kolevatov, Yu.I.; Trykov, L.A.

1979-01-01

Characteristics of radionuclide neutron sourses of 252 Cf base with the activity from 10 6 to 10 9 n/s have been investigated. Energetic distributions of neutrons and gamma-radiation have been presented. The results obtained have been compared with other data available. The hardness parameter of the neutron spectrum for the energy range from 3 to 15 MeV is 1.4 +- 0.02 MeV

[Evaluation of the effect of one-step self etching adhesives applied in pit and fissure sealing].

Science.gov (United States)

Su, Hong-Ru; Xu, Pei-Cheng; Qian, Wen-Hao

2016-06-01

To observe the effect of three one-step self etching adhesive systems used in fit and fissure sealant and explore the feasibility of application in caries prevention in school. Seven hundred and twenty completely erupted mandibular first molars in 360 children aged 7 to 9 years old were chosen. The split-mouth design was used to select one side as the experimental group, divided into A1(Easy One Adper), B1(Adper Easy One), and C1(iBond SE).The contra lateral teeth served as A2,B2 and C2 groups (phosphoric acid). The retention and caries status were regularly reviewed .The clinical effect of the two groups was compared using SPSS19.0 software package for Chi - square test. At 3 and 6 months, pit and fissure sealant retention rate in A1 and A2, B1 and B2,C1 and C2 group had no significant difference. At 12 months, sealant retention in A1 and B1 group was significantly lower than A2 and B2 group (P0.05). At 24 months, sealant retention rate in A1, B1 and C1 group was significantly lower than A2, B2 and C2 group (P0.05). The clinical anticariogenic effect of three kinds of one-step etching adhesives and phosphoric acid etching sealant was similar .One-step self etching adhesive system was recommended for pit and fissure sealant to improve the students' oral health. The long-term retention rate of one-step self etching adhesive system was lower than the phosphoric acid method to long term observation is needed.

Gladstone-Dale constant for CF4. [experimental design

Science.gov (United States)

Burner, A. W., Jr.; Goad, W. K.

1980-01-01

The Gladstone-Dale constant, which relates the refractive index to density, was measured for CF4 by counting fringes of a two-beam interferometer, one beam of which passes through a cell containing the test gas. The experimental approach and sources of systematic and imprecision errors are discussed. The constant for CF4 was measured at several wavelengths in the visible region of the spectrum. A value of 0.122 cu cm/g with an uncertainty of plus or minus 0.001 cu cm/g was determined for use in the visible region. A procedure for noting the departure of the gas density from the ideal-gas law is discussed.

Fissure sealants in caries prevention:a practice-based study using survival analysis

OpenAIRE

Leskinen, K. (Kaja)

2010-01-01

Abstract The purpose of this study was to analyse the effectiveness and cost of fissure sealant treatment in preventing dental caries in children in a practice-based research network using survival analysis. The survival times of first permanent molars in children were analysed in three countries: in Finland (age cohorts 1970–1972 and 1980–1982), in Sweden (1980–1982) and in Greece (1980–1982), and additionally at two municipal health centres in Finland (age cohorts 1988–1990 in Kemi...

Superior orbital fissure syndrome in herpes zoster ophthalmicus.

LENUS (Irish Health Repository)

Kirwan, R P

2012-02-01

AIM: To report a case of superior orbital fissure syndrome (SOFS) in a patient with herpes zoster ophthalmicus (HZO). MATERIALS AND METHODS: A case report. RESULTS: A 71-year-old male with HZO presented acutely to accident and emergency complaining of right vision loss, double vision and drowsiness. The right visual acuity was counting fingers. There was no relative afferent pupillary defect. He had interstitial keratitis, ptosis, proptosis and total ophthalmoplaegia. The signs indicated HZO complicated by SOFS. Brain imaging and lumbar puncture confirmed the diagnosis of varicella zoster encephalitis. Systemic acyclovir and prednisolone led to recovery of visual acuity and ocular motility in addition to resolution of his proptosis and ptosis. CONCLUSION: SOFS is a rare complication of herpes zoster infection. With the appropriate treatment and follow-up, patients may be reassured that recovery of their visual acuity and ocular motility will occur.

Alkali metal and ammonium fluoro(trifluoroacetato)metallates M'[ M''3(μ3-F)(CF3COO)6(CF3COOH)3], where M' = Li, Na, K, NH4, Rb, or Cs and M'' = Ni or Co. Synthesis and crystal structures

Science.gov (United States)

Tereshchenko, D. S.; Morozov, I. V.; Boltalin, A. I.; Karpova, E. V.; Glazunova, T. Yu.; Troyanov, S. I.

2013-01-01

A series of fluoro(trifluoroacetato)metallates were synthesized by crystallization from solutions in trifluoroacetic acid containing nickel(II) or cobalt(II) nitrate hydrates and alkali metal or ammonium fluorides: Li[Ni3(μ3-F)(CF3COO)6(CF3COOH)3](CF3COOH)3 ( I), M'[Ni3(μ3-F)(CF3COO)6(CF3COOH)3] ( M' = Na ( II), NH4 ( IV), Rb ( V), and Cs ( VI)), NH4[Co3(μ3-F) (CF3COO)6(CF3COOH)3] ( III), and Cs[Ni3(μ3-F)(CF3COO)6(CF3COOH)3](CF3COOH)0.5 ( VII). The crystal structures of these compounds were determined by single-crystal X-ray diffraction. All structures contain triangular trinuclear complex anions [ M 3″(μ3-F)(CF3COO)6(CF3COOH)3]- ( M″ = Ni, Co) structurally similar to trinuclear 3d metal oxo carboxylate complexes. The three-coordinated F atom is located at the center of the triangle formed by Ni(II) or Co(II) atoms. The metal atoms are linked in pairs by six bridging trifluoroacetate groups located above and below the plane of the [ M″3 F] triangle. The oxygen atoms of the axial CF3COOH molecules complete the coordination environment of M″ atoms to an octahedron.

A restructuring of CF package for MIDAS computer code

International Nuclear Information System (INIS)

Park, S. H.; Kim, K. R.; Kim, D. H.; Cho, S. W.

2004-01-01

CF package, which evaluates user-specified 'control functions' and applies them to define or control various aspects of computation, has been restructured for the MIDAS computer code. MIDAS is being developed as an integrated severe accident analysis code with a user-friendly graphical user interface and modernized data structure. To do this, data transferring methods of current MELCOR code are modified and adopted into the CF package. The data structure of the current MELCOR code using FORTRAN77 causes a difficult grasping of meaning of the variables as well as waste of memory, difficulty is more over because its data is location information of other package's data due to characteristics of CF package. New features of FORTRAN90 make it possible to allocate the storage dynamically and to use the user-defined data type, which lead to an efficient memory treatment and an easy understanding of the code. Restructuring of the CF package addressed in this paper includes module development, subroutine modification, and treats MELGEN, which generates data file, as well as MELCOR, which is processing a calculation. The verification has been done by comparing the results of the modified code with those from the existing code. As the trends are similar to each other, it hints that the same approach could be extended to the entire code package. It is expected that code restructuring will accelerate the code domestication thanks to direct understanding of each variable and easy implementation of modified or newly developed models

Physical simulation and theoretical evolution for ground fissures triggered by underground coal mining.

Science.gov (United States)

Yang, Jing-Hu; Yu, Xiang; Yang, Yi; Yang, Zeng-Qiang

2018-01-01

Underground coal mining activities are prone to cause movement and breakage in geological strata and also lead to mining subsidence and even ground fissures. Along the direction working panel advancing, ground fissures may occur in roof in front and/or behind working panel. However, the investigations of previous similarity tests in lab only emphasize on the region behind working panel. By improving strata material property in construction and mounting artificial pressure devices, two physical simulation tests were conducted and successfully investigated the simulated results. Then, the mechanical model of "cantilever beam and elastic foundation beam" was proposed to calculate the stress distribution and the crack initiation angle in overlying strata and it well explains the mechanisms of ground fissures generation and propagation. Results show that, the maximum internal force in roof always occurred in front of working panel. However, because the void space in gob due to excavation is large enough to cause the bend and rotation of roof strata, compare to the triaxially compressed region in front of working panel, the roof always broke off at some positions above gob since the stress concentration resulting from such bend and rotation of strata could easily reach the limit strength of strata rocks. Also, the length of cantilever beam changed dynamically as respect to the panel advancing and the breakage intervals. Thus, the breakage position where the internal force first reached the limit tensile strength is not fixed and there will be two different kinds of relative positions between the crack initiation point and the working panel. The crack initiation direction is always perpendicular to the internal force, and the crack propagation direction is affected by the initiation angle, overburden-separation degree and the position of the hydraulic shields. If there is no overburden-separation or less, the roofs will break off as a composite beam and the propagation

Physical simulation and theoretical evolution for ground fissures triggered by underground coal mining

Science.gov (United States)

Yu, Xiang; Yang, Yi; Yang, Zeng-Qiang

2018-01-01

Underground coal mining activities are prone to cause movement and breakage in geological strata and also lead to mining subsidence and even ground fissures. Along the direction working panel advancing, ground fissures may occur in roof in front and/or behind working panel. However, the investigations of previous similarity tests in lab only emphasize on the region behind working panel. By improving strata material property in construction and mounting artificial pressure devices, two physical simulation tests were conducted and successfully investigated the simulated results. Then, the mechanical model of “cantilever beam and elastic foundation beam” was proposed to calculate the stress distribution and the crack initiation angle in overlying strata and it well explains the mechanisms of ground fissures generation and propagation. Results show that, the maximum internal force in roof always occurred in front of working panel. However, because the void space in gob due to excavation is large enough to cause the bend and rotation of roof strata, compare to the triaxially compressed region in front of working panel, the roof always broke off at some positions above gob since the stress concentration resulting from such bend and rotation of strata could easily reach the limit strength of strata rocks. Also, the length of cantilever beam changed dynamically as respect to the panel advancing and the breakage intervals. Thus, the breakage position where the internal force first reached the limit tensile strength is not fixed and there will be two different kinds of relative positions between the crack initiation point and the working panel. The crack initiation direction is always perpendicular to the internal force, and the crack propagation direction is affected by the initiation angle, overburden-separation degree and the position of the hydraulic shields. If there is no overburden-separation or less, the roofs will break off as a composite beam and the

Reactions of CF3O radicals with selected alkenes and aromatics under atmospheric conditions

DEFF Research Database (Denmark)

Kelly, C.; Sidebottom, H.W.; Treacy, J.

1994-01-01

Rate data for the reactions of CF3O radicals with alkenes and aromatic compounds have been determined at 298 K using a relative rate method. The data are analyzed in terms of structure-reactivity relationships, and their importance to the atmospheric chemistry of CF3O discussed.......Rate data for the reactions of CF3O radicals with alkenes and aromatic compounds have been determined at 298 K using a relative rate method. The data are analyzed in terms of structure-reactivity relationships, and their importance to the atmospheric chemistry of CF3O discussed....

Magnetic susceptibility of 244Cm metal and 249Cf metal

International Nuclear Information System (INIS)

Fujita, D.K.; Parsons, T.C.; Edelstein, N.; Noe, M.; Peterson, J.R.

1975-07-01

The first magnetic susceptibility measurements made on the expanded fcc phase of 249 Cf metal are reported. Further measurements are needed on other Cf metal phases. Another measurement of the magnetic susceptibility of 244 Cm metal in a limited temperature range has been reported. The result does not agree with previously reported values. Further work is continuing on the synthesis of 244 Cm metal and 248 Cm metal and magnetic measurements on these samples. (auth)

The status of low dose rate and future of high dose rate Cf-252 brachytherapy

International Nuclear Information System (INIS)

Rivard, M.J.; Wierzbicki, J.G.; Van den Heuvel, F.; Chuba, P.J.; Fontanesi, J.

1997-12-01

This work describes the current status of the US low dose rate (LDR) Cf-252 brachytherapy program. The efforts undertaken towards development of a high dose rate (HDR) remotely after loaded Cf-252 source, which can accommodate 1 mg or greater Cf-252, are also described. This HDR effort is a collaboration between Oak Ridge National Laboratory (ORNL), commercial remote after loader manufactures, the Gershenson Radiation Oncology Center (ROC), and Wayne State University. To achieve this goal, several advances in isotope chemistry and source preparation at ORNL must be achieved to yield a specific material source loading of greater than or equal 1 mg Cf-252 per mm3. Development work with both radioactive and non-radioactive stand-ins for Cf-252 have indicated the feasibility of fabricating such sources. As a result, the decreased catheter diameter and computer controlled source placement will permit additional sites (e.g. brain, breast, prostate, lung, parotid, etc.) to be treated effectively with Cf-252 sources. Additional work at the Radiochemical Engineering and Development Center (REDC) remains in source fabrication, after loader modification, and safe design. The current LDR Cf-252 Treatment Suite at the ROC is shielded and licensed to hold up to 1 mg of Cf-252. This was designed to maintain cumulative personnel exposure, both external to the room and in direct isotope handling, at less than 20 microSv/hr. However, cumulative exposure may be greatly decreased if a Cf-252 HDR unit is employed which would eliminate direct isotope handling and decrease treatment times from tilde 3 hours to an expected range of 3 to 15 minutes. Such a Cf-252 HDR source will also demonstrate improved dose distributions over current LDR treatments due to the ability to step the point-like source throughout the target volume and weight the dwell time accordingly

Highly preferential association of NonF508del CF mutations with the M470 allele.

Science.gov (United States)

Ciminelli, B M; Bonizzato, A; Bombieri, C; Pompei, F; Gabaldo, M; Ciccacci, C; Begnini, A; Holubova, A; Zorzi, P; Piskackova, T; Macek, M; Castellani, C; Modiano, G; Pignatti, P F

2007-01-01

On the basis of previous findings on random individuals, we hypothesized a preferential association of CF causing mutations with the M allele of the M470V polymorphic site of the CFTR gene. We have determined the M/V-CF mutation haplotype in a series of 201 North East Italian and 73 Czech CF patients who were not F508del homozygotes, as F508del was already known to be fully associated with the M allele. Out of 358 not F508del CF genes, 84 carried the V allele and 274 the less common M allele. In the N-E Italian population, MM subjects have a risk of carrying a CF causing mutation 6.9x greater than VV subjects when F508del is excluded and 15.4x when F508del is included. In the Czech population a similar, although less pronounced, association is observed. Besides the possible biological significance of this association, the possibility of exploiting it for a pilot screening program has been explored in a local North East Italian population for which CF patients were characterized for their CF mutation. General M470V genotyping followed by common CF mutation screening limited to couples in which each partner carries at least one M allele would need testing only 39% of the couples, which contribute 89% of the total risk, with a cost benefit.

The effect of CF4 addition on Ru etching with inductively coupled plasma

International Nuclear Information System (INIS)

Lim, Kyu Tae; Kim, Dong Pyo; Kim, Kyoung Tae; Kim, Chang Il

2003-01-01

Ru thin films were etched in CF 4 /O 2 plasma using an ICP (inductively coupled plasma etching) system. The etch rate of Ru thin films was examined as a function of gas mixing ratio. The maximum etch rate of Ru thin films was 168 nm/min at a CF 4 /O 2 gas mixing ratio of 10 %. The selectivity of Ru over SiO 2 was 1.3. From the OES (optical emission spectroscopy), the optical emission intensity of the O radical had a maximum value at 10 % of CF 4 gas concentration and decrease with further addition of CF 4 gas. From XPS (x-ray photoelectron spectroscopy) analysis, Ru-F bonds by the chemical reaction of Ru and F appeared in the surface of the etched Ru thin film in CF 4 /O 2 chemistry. RuF 3-4 compounds were suggested as a surface passivation layer that reduces the chemical reactions between Ru and O radicals. In a FE-SEM (field emission scanning electron microscope) micrograph, we had an almost perpendicular taper angle of 89 .deg.

Neutron shielding for a {sup 252} Cf source

Energy Technology Data Exchange (ETDEWEB)

Vega C, H.R.; Manzanares A, E.; Hernandez D, V.M. [Unidades Academicas de Estudios Nucleares e Ingenieria Electrica, Universidad Autonoma de Zacatecas, C. Cipres 10, Fracc. La Penuela, 98068 Zacatecas (Mexico); Eduardo Gallego, Alfredo Lorente [Depto. de Ingenieria Nuclear, ETS Ingenieros Industriales, Universidad Politecnica de Madrid, C. Jose Gutierrez Abascal 2, 28006 Madrid (Spain)]. e-mail: fermineutron@yahoo.com

2006-07-01

To determine the neutron shielding features of water-extended polyester a Monte Carlo study was carried out. Materials with low atomic number are predominantly used for neutron shielding because these materials effectively attenuate neutrons, mainly through inelastic collisions and absorption reactions. During the selection of materials to design a neutron shield, prompt gamma production as well as radionuclide production induced by neutron activation must be considered. In this investigation the Monte Carlo method was used to evaluate the performance of a water-extended polyester shield designed for the transportation, storage, and use of a {sup 252}Cf isotopic neutron source. During calculations a detailed model for the {sup 252}Cf and the shield was utilized. To compare the shielding features of water extended polyester, the calculations were also made for the bare {sup 252}Cf in vacuum, air and the shield filled with water. For all cases the calculated neutron spectra was utilized to determine the ambient equivalent neutron dose at four sites around the shielding. In the case of water extended polyester and water shielding the calculations were extended to include the prompt gamma rays produced during neutron interactions, with this information the Kerma in air was calculated at the same locations where the ambient equivalent neutron dose was determined. (Author)

A pneumatic transfer system for special form 252Cf

International Nuclear Information System (INIS)

Gehrke, R.J.; Berry, S.M.; Grafwallner, E.G.; Hoggan, J.M.

1996-09-01

A pneumatic transfer system has been developed for use with series 100 Special Form 252 Cf. It was developed to reduce the exposure to personnel handling sources of 252 Cf with masses up to 150 microg by permitting remotely activated two-way transfer between the storage container and the irradiation position. The pneumatic transfer system also permits transfers for reproducible repetitive irradiation periods. In addition to the storage container equipped with quick-release fittings, the transfer system consists of an irradiation station, a control box with momentary contact switches to activate the air-pressure control valves and indicators to identify the location of the source, and connecting air hose and electrical wire. A source of 20 psig air and 110 volt electrical power are required for operation of the transfer system which can be easily moved and set up by one individual in 5 to 10 minutes. Tests have shown that rarely does a source become lodged in the transfer tubing, but two methods have been developed to handle incomplete transfers of the 252 Cf source. The first method consists of closing one air vent to allow a pressure impulse to propel the source to the opposite side. The second method applies to those 252 Cf capsules with a threaded or tapped end to which a small ferromagnetic piece can be attached; an incompletely transferred source in the transfer tube can then be guided to a position of safety by surrounding the transfer tubing containing the capsule with a horseshoe magnet attached to the end of a long pole

Atmospheric chemistry of Z- and E-CF3CH=CHCF3

DEFF Research Database (Denmark)

Østerstrøm, Freja From; Andersen, Simone Thirstrup; Sølling, Theis Ivan

2017-01-01

radicals. The atmospheric lifetimes of Z- and E-CF3CH[double bond, length as m-dash]CHCF3 are estimated as 27 and 67 days, respectively. IR absorption cross sections are reported and the global warming potentials (GWPs) of Z- and E-CF3CH[double bond, length as m-dash]CHCF3 for the 100 year time horizon...

The luminosity function for different morphological types in the CfA Redshift Survey

Science.gov (United States)

Marzke, Ronald O.; Geller, Margaret J.; Huchra, John P.; Corwin, Harold G., Jr.

1994-01-01

We derive the luminosity function for different morphological types in the original CfA Redshift Survey (CfA1) and in the first two slices of the CfA Redshift Survey Extension (CfA2). CfA1 is a complete sample containing 2397 galaxies distributed over 2.7 steradians with m(sub z) less than or equal 14.5. The first two complete slices of CfA2 contain 1862 galaxies distributed over 0.42 steradians with m(sub z)=15.5. The shapes of the E-S0 and spiral luminosity functions (LF) are indistinguishable. We do not confirm the steeply decreasing faint end in the E-S0 luminosity function found by Loveday et al. for an independent sample in the southern hemisphere. We demonstrate that incomplete classification in deep redshift surveys can lead to underestimates of the faint end of the elliptical luminosity function and could be partially responsible for the difference between the CfA survey and other local field surveys. The faint end of the LF for the Magellanic spirals and irregulars is very steep. The Sm-Im luminosity function is well fit by a Schechter function with M*=-18.79, alpha=-1.87, and phi*=0.6x10(exp -3) for M(sub z) less than or equal to -13. These galaxies are largely responsible for the excess at the faint end of the general CfA luminosity function. The abundance of intrinsically faint, blue galaxies nearby affects the interpretation of deep number counts. The dwarf population increases the expected counts at B=25 in a no-evolution, q(sub 0)=0.05 model by a factor of two over standard no-evolution estimates. These dwarfs change the expected median redshift in deep redshift surveys by less than 10 percent . Thus the steep Sm-Im LF may contribute to the reconciliation of deep number counts with deep redshift surveys.

Radiation ulcers in patients with cancer of the tongue after /sup 252/Cf therapy

Energy Technology Data Exchange (ETDEWEB)

Galantseva, G.F.; Guseva, L.I.; Plichko, V.I. (Akademiya Meditsinskikh Nauk SSSR, Obninsk. Nauchno-Issledovatel' skij Inst. Meditsinskoj Radiologii)

1984-01-01

Interstitial therapy with /sup 252/Cf was conducted for 57 patients with cancer of the tongue. It was established that clinical course of radiation tungue ulcers after interstitial therapy with /sup 252/Cf doesn't differ sufficiently from the course of radiation injuries, occurring after ..gamma..-radiation application. Radiation ulcers are often observed in patients after the treatment of recurrent and residual tumors with /sup 252/Cf (in 33% of patients); the ulcers appeared in 15% of cases in patients after the treatment of initial ulcers tumors. Conservative treatment provide the cure of radiation tongue ulcers after interstitial therapy with /sup 252/Cf.

Quenching the scintillation in CF4 Cherenkov gas radiator

International Nuclear Information System (INIS)

Blake, T.; D'Ambrosio, C.; Easo, S.; Eisenhardt, S.; Fitzpatrick, C.; Forty, R.; Frei, C.; Gibson, V.; Gys, T.; Harnew, N.; Hunt, P.; Jones, C.R.; Lambert, R.W.; Matteuzzi, C.; Muheim, F.; Papanestis, A.; Perego, D.L.; Piedigrossi, D.; Plackett, R.; Powell, A.

2015-01-01

CF 4 is used as a Cherenkov gas radiator in one of the Ring Imaging Cherenkov detectors at the LHCb experiment at the CERN Large Hadron Collider. CF 4 is well known to have a high scintillation photon yield in the near and far VUV, UV and in the visible wavelength range. A large flux of scintillation photons in our photon detection acceptance between 200 and 800 nm could compromise the particle identification efficiency. We will show that this scintillation photon emission system can be effectively quenched, consistent with radiationless transitions, with no significant impact on the photons resulting from Cherenkov radiation

Thinning and functionalization of few-layer graphene sheets by CF4 plasma treatment

KAUST Repository

Shen, Chao

2012-05-24

Structural changes of few-layer graphene sheets induced by CF4 plasma treatment are studied by optical microscopy and Raman spectroscopy, together with theoretical simulation. Experimental results suggest a thickness reduction of few-layer graphene sheets subjected to prolonged CF4 plasma treatment while plasma treatment with short time only leads to fluorine functionalization on the surface layer by formation of covalent bonds. Raman spectra reveal an increase in disorder by physical disruption of the graphene lattice as well as functionalization during the plasma treatment. The F/CF3 adsorption and the lattice distortion produced are proved by theoretical simulation using density functional theory, which also predicts p-type doping and Dirac cone splitting in CF4 plasma-treated graphene sheets that may have potential in future graphene-based micro/nanodevices.

Generation of the ArCF22+ dication

Czech Academy of Sciences Publication Activity Database

Lockyear, J. F.; Douglas, K.; Price, S. D.; Karwowska, M.; Fijalkowski, K. J.; Grochala, W.; Remeš, M.; Roithová, J.; Schröder, Detlef

-, č. 1 (2010), s. 358-362 ISSN 1948-7185 R&D Projects: GA ČR GA203/09/1223 Institutional research plan: CEZ:AV0Z40550506 Keywords : argon * dications * mass spectrometry * rare-gas compounds * superelectrophiles Subject RIV: CF - Physical ; Theoretical Chemistry

Haloacyl complexes of boron, [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br, I).

Science.gov (United States)

Finze, Maik; Bernhardt, Eduard; Willner, Helge; Lehmann, Christian W

2005-11-04

The haloacyltris(trifluoromethyl)borate anions [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br, I) have been synthesized by reacting (CF3)3BCO with either MHal (M=K, Cs; Hal=F) in SO2 or MHal (M=[nBu4N]+, [Et4N]+, [Ph4P]+; Hal=Cl, Br, I) in dichloromethane. Metathesis reactions of the fluoroacyl complex with Me3SiHal (Hal=Cl, Br, I) led to the formation of its higher homologues. The thermal stabilities of the haloacyltris(trifluoromethyl)borates decrease from the fluorine to the iodine derivative. The chemical reactivities decrease in the same order as demonstrated by a series of selected reactions. The new [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br) salts are used as starting materials in the syntheses of novel compounds that contain the (CF3)3B-C fragment. All borate anions [(CF3)3BC(O)Hal]- (Hal=F, Cl, Br, I) have been characterized by multinuclear NMR spectroscopy (11B, 13C, 17O, 19F) and vibrational spectroscopy. [PPh4][(CF3)3BC(O)Br] crystallizes in the monoclinic space group P2/c (no. 13) and the bond parameters are compared with those of (CF3)3BCO and K[(CF3)3BC(O)F]. The interpretation of the spectroscopic and structural data are supported by DFT calculations [B3LYP/6-311+G(d)].

Impact of enzymatic digestion on bacterial community composition in CF airway samples.

Science.gov (United States)

Williamson, Kayla M; Wagner, Brandie D; Robertson, Charles E; Johnson, Emily J; Zemanick, Edith T; Harris, J Kirk

2017-01-01

Previous studies have demonstrated the importance of DNA extraction methods for molecular detection of Staphylococcus, an important bacterial group in cystic fibrosis (CF). We sought to evaluate the effect of enzymatic digestion (EnzD) prior to DNA extraction on bacterial communities identified in sputum and oropharyngeal swab (OP) samples from patients with CF. DNA from 81 samples (39 sputum and 42 OP) collected from 63 patients with CF was extracted in duplicate with and without EnzD. Bacterial communities were determined by rRNA gene sequencing, and measures of alpha and beta diversity were calculated. Principal Coordinate Analysis (PCoA) was used to assess differences at the community level and Wilcoxon Signed Rank tests were used to compare relative abundance (RA) of individual genera for paired samples with and without EnzD. Shannon Diversity Index (alpha-diversity) decreased in sputum and OP samples with the use of EnzD. Larger shifts in community composition were observed for OP samples (beta-diversity, measured by Morisita-Horn), whereas less change in communities was observed for sputum samples. The use of EnzD with OP swabs resulted in significant increase in RA for the genera Gemella ( p  microbial community composition. We show that the application of EnzD to CF airway samples, particularly OP swabs, results in differences in microbial communities detected by sequencing. Use of EnzD can result in large changes in bacterial community composition, and is particularly useful for detection of Staphylococcus in CF OP samples. The enhanced identification of Staphylococcus aureus is a strong indication to utilize EnzD in studies that use OP swabs to monitor CF airway communities.

Electron drift velocities of Ar-CO2-CF4 gas mixtures

International Nuclear Information System (INIS)

Markeloff, R.

1994-11-01

The muon spectrometer for the D0 experiment at Fermi National Accelerator Laboratory uses proportional drift tubes filled with an Ar-CO 2 -CF 4 gas mixture. Measurements of drift velocity as a function of electric field magnitude for 90%-5%-5% and 90%-4%-6% Ar-CO 2 -CF 4 mixtures are presented, and our operational experiences with these gases at D0 is discussed

Dielectric Properties of SiCf/PyC/SiC Composites After Oxidation

Institute of Scientific and Technical Information of China (English)

SONG Huihui; ZHOU Wancheng; LUO Fa; QING Yuchang; CHEN Malin; LI Zhimin

2016-01-01

In this paper, the SiC fiber-reinforced SiC matrix composites with a 0.15mm thick pyrocarbon interphase (notedas SiCf/PyC/SiC) were prepared by chemical vapor infiltration (CVI). The SiCf/PyC/SiC were oxidized in air at 950℃ for 50h. The dielectric properties after this high temperature oxidation were investigated in X-band from room temperature (RT) to 700℃. Results suggested that:e' of the SiCf/PyC/SiC after oxidation increased at first then de-creased with temperature elevating;e" increased with temperature raising in the temperature range studied.

Quality of life in children with CF: Psychometrics and relations with stress and mealtime behaviors.

Science.gov (United States)

Driscoll, Kimberly A; Modi, Avani C; Filigno, Stephanie S; Brannon, Erin E; Chamberlin, Leigh Ann; Stark, Lori J; Powers, Scott W

2015-06-01

The purpose of this study was to evaluate the utility of the Cystic Fibrosis Questionnaire-Revised (CFQ-R) with toddlers and preschool-aged children. Clinically relevant relations between health-related quality of life (HRQOL), stress, and mealtime behaviors have not been examined. It was hypothesized that problematic mealtime behaviors and increased stress would be negatively associated with HRQOL. Parents of 73 children (2-6 years) with CF completed questionnaires assessing their children's generic (PedsQL) and CF-specific HRQOL, parenting and CF-specific stress, and mealtime behaviors. CFQ-R Physical, Eating, and Respiratory HRQOL subscales had acceptable to strong reliability (alphas = 0.73-0.86); other scales approached acceptable reliability. Lower CF-specific stress was associated with higher CFQ-R Eating HRQOL (B = -0.84; P < 0.05) scores. Fewer eating problems were associated with higher CFQ-R Eating (B = -1.17; P < 0.0001) and Weight HRQOL (B = -0.78; P < 0.01) scores. As hypothesized, problematic eating and higher CF-specific stress was associated with lower CF-specific HRQOL. The CFQ-R has promise for use in young children with CF, but will need to be modified to exchange items not relevant to preschoolers with items that are more relevant to this age group. © 2014 Wiley Periodicals, Inc.

CfA3: 185 TYPE Ia SUPERNOVA LIGHT CURVES FROM THE CfA

International Nuclear Information System (INIS)

Hicken, Malcolm; Challis, Peter; Kirshner, Robert P.; Bakos, Gaspar; Berlind, Perry; Brown, Warren R.; Caldwell, Nelson; Calkins, Mike; Cho, Richard; Contreras, Maria; Jha, Saurabh; Matheson, Tom; Modjaz, Maryam; Rest, Armin; Michael Wood-Vasey, W.; Barton, Elizabeth J.; Bragg, Ann; Briceno, Cesar; Ciupik, Larry; Dendy, Kristi-Concannon

2009-01-01

We present multiband photometry of 185 type-Ia supernovae (SNe Ia), with over 11,500 observations. These were acquired between 2001 and 2008 at the F. L. Whipple Observatory of the Harvard-Smithsonian Center for Astrophysics (CfA). This sample contains the largest number of homogeneously observed and reduced nearby SNe Ia (z ∼< 0.08) published to date. It more than doubles the nearby sample, bringing SN Ia cosmology to the point where systematic uncertainties dominate. Our natural system photometry has a precision of ∼<0.02 mag in BVRIr'i' and ∼<0.04 mag in U for points brighter than 17.5 mag. We also estimate a systematic uncertainty of 0.03 mag in our SN Ia standard system BVRIr'i' photometry and 0.07 mag for U. Comparisons of our standard system photometry with published SN Ia light curves and comparison stars, where available for the same SN, reveal agreement at the level of a few hundredths mag in most cases. We find that 1991bg-like SNe Ia are sufficiently distinct from other SNe Ia in their color and light-curve-shape/luminosity relation that they should be treated separately in light-curve/distance fitter training samples. The CfA3 sample will contribute to the development of better light-curve/distance fitters, particularly in the few dozen cases where near-infrared photometry has been obtained and, together, can help disentangle host-galaxy reddening from intrinsic supernova color, reducing the systematic uncertainty in SN Ia distances due to dust.

Analysis of radionuclide transport through fissured porous media with a perturbation method

Energy Technology Data Exchange (ETDEWEB)

Banat, M [JGC Corp., Tokyo (Japan)

1995-04-01

This paper presents a specific procedure for obtaining solutions for the transport of radionuclides in a fissured porous media. The concentration profiles are deduced for a wide range of Peclet numbers using a perturbation method with a multiscale of time. Results show clearly that because of an increase of longitudinal dispersion, the radionuclide moves faster with respect to the case of zero dispersion (i.e. an infinite Peclet number). The main purpose of this paper is to demonstrate the practical advantage of the present calculation method with respect to the classical numerical and analytical methods used for radionuclide transport. (author).

Copper-Catalyzed Trifluoromethylazidation of Alkynes: Efficient Access to CF3-Substituted Azirines and Aziridines.

Science.gov (United States)

Wang, Fei; Zhu, Na; Chen, Pinhong; Ye, Jinxing; Liu, Guosheng

2015-08-03

A novel method for convenient access to CF3-containing azirines has been developed, and involves a copper-catalyzed trifluoromethylazidation of alkynes and a photocatalyzed rearrangement. Both terminal and internal alkynes are compatible with the mild reaction conditions, thus delivering the CF3-containing azirines in moderate to good yields. The azirines can be converted into various CF3-substituted aziridines. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hydrophobic treatment on polymethylmethacrylate surface by nanosecond-pulse DBDs in CF4 at atmospheric pressure

International Nuclear Information System (INIS)

Zhang, Cheng; Zhou, Yang; Shao, Tao; Xie, Qing; Xu, Jiayu; Yang, Wenjin

2014-01-01

Highlights: • Increase in hydrophobicity on PMMA is achieved after the DBD treatment in CF 4 , and the water contact angle can increase from 68° to 100° after treatment. • Nanosecond-pulse DBD is used for the surface treatment and the power density is about 114.8 mW/cm 2 . • The effects of applied voltage, CF 4 flow, and time on plasma treatment are investigated. • Plasma treatment causes morphological change, significantly increases the roughness of the surface, and introduces fluorine-containing groups into the polymethylmethacrylate surface. • Hydrophobic behavior of the treated PMMA surface is slightly affected by the aging effect. - Abstract: Nanosecond-pulse dielectric barrier discharge (DBD) can provide non-thermal plasmas with extremely high energy and high density, which can result in a series of complicated physical and chemical reactions in the surface treatment of polymers. Therefore, in this paper, hydrophobic treatment of polymethylmethacrylate (PMMA) surface is conducted by nanosecond-pulse DBD in carbon tetrafluoride (CF 4 ) at atmospheric pressure. Investigations on surface morphology and chemical composition before and after the DBD treatment in CF 4 are conducted with the contact angle measurement, atomic force microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectrometer. The effects of the applied voltage, CF 4 flow rate, and treatment time on the hydrophobic modification are studied. Results show that the contact angles of the treated PMMA surface increases with the applied voltage, and it could be greatly affected by the CF 4 flow rate and the treatment time. The water contact angle can increase from 68° to 100° after the treatment. Furthermore, both surface morphology and chemical composition of the PMMA samples are changed. Both the increase of the surface roughness and the occurrence of fluorine-containing functional groups on the PMMA surface treated by DBD in CF 4 lead to the hydrophobicity

Data of evolutionary structure change: 1CF5B-1RTCA [Confc[Archive

Lifescience Database Archive (English)

Full Text Available 1CF5B-1RTCA 1CF5 1RTC B A --------DVNFDLSTATAKTYTKFIEDFRATL-PFSHK...A 211 1RTC A 1RTCA...ain> 1RTC A 1RTCA SALYYYSTGGTQLPT...pdbChain> 1RTCA MRTRIRYNRRSA HHHHHH 1RTCA AYFFH-PDNQE

Core Facility of the Juelich Observatory for Cloud Evolution (JOYCE - CF)

Science.gov (United States)

Beer, J.; Troemel, S.

2017-12-01

A multiple and holistic multi-sensor monitoring of clouds and precipitation processes is a challenging but promising task in the meteorological community. Instrument synergies offer detailed views in microphysical and dynamical developments of clouds. Since 2017 The the Juelich Observatory for Cloud Evolution (JOYCE) is transformed into a Core Facility (JOYCE - CF). JOYCE - CF offers multiple long-term remote sensing observations of the atmosphere, develops an easy access to all observations and invites scientists word wide to exploit the existing data base for their research but also to complement JOYCE-CF with additional long-term or campaign instrumentation. The major instrumentation contains a twin set of two polarimetric X-band radars, a microwave profiler, two cloud radars, an infrared spectrometer, a Doppler lidar and two ceilometers. JOYCE - CF offers easy and open access to database and high quality calibrated observations of all instruments. E.g. the two polarimetric X-band radars which are located in 50 km distance are calibrated using the self-consistency method, frequently repeated vertical pointing measurements as well as instrument synergy with co-located micro-rain radar and distrometer measurements. The presentation gives insights into calibration procedures, the standardized operation procedures and recent synergistic research exploiting our radars operating at three different frequencies.

Data of evolutionary structure change: 1NTOC-2CF5A [Confc[Archive

Lifescience Database Archive (English)

Full Text Available 1NTOC-2CF5A 1NTO 2CF5 C A ----MRAVRLVEIGKPLSLQEIGVPKPKGPQVLIKVEAA...1NTO C 1NTOC VNPWQ-GEGNC C 1NTOC MYKLR-RLNAV ...Chain> 1NTO C 1NTOC RKASL-DPTKT C 1NTOC EAAKR-AGADY

Californium Cf-252 for pelvic radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Maruyama, Y; Feola, J M; Tai, D; Wilson, L C; Van Nagell, J R; Yoneda, J

1978-01-01

Clinical data about therapy concerning tumors of the female gynecological cancers of the cervix, vagina and uterus are reviewed. Dosimetric, laboratory and radiobiological research data form the basis for an approach to such tumors using Cf-252 as a form of boost brachytherapy. Extreme personnel hazards are a real and important consideration and indicate that maximal containment and isolation procedures should be exercised in its use.

Intra-individual biological variation in sweat chloride concentrations in CF, CFTR dysfunction, and healthy pediatric subjects.

Science.gov (United States)

Cirilli, Natalia; Raia, Valeria; Rocco, Ilaria; De Gregorio, Fabiola; Tosco, Antonella; Salvadori, Laura; Sepe, Angela Ornella; Buzzetti, Roberto; Minicuci, Nadia; Castaldo, Giuseppe

2018-04-02

The sweat test is one of the main diagnostic tools used in newborn screening programs and as a confirmatory test, in case of suspect of Cystic Fibrosis (CF). Since sweat chloride (Cl) concentration is also considered an appropriate parameter to explore the efficacy of CFTR modulators in clinical trials, it is crucial to evaluate the biological variability of this test in healthy and pathological conditions. The aim of this pilot study was to determine the intra-individual biological variability of sweat Cl, both in healthy individuals and CF patients and to assess its correlation with diet, season, and menstrual cycle. Thirty-five out of 36 selected subjects (6-18 years) were enrolled by 2 CF care centers and assigned to 3 cohorts: CF, CFTR-related disorder (CFTR-RD) and healthy volunteers. Each participant was subjected to eight sweat tests in different conditions and time of the year. Data were analyzed using linear mixed effects models for repeated measures, taking also into account intra-individual correlations. We observed a high intra-individual variability of sweat Cl, with the lowest mean CV% values among CF patients (20.21 in CF, 29.74 in CFTR-RD, and 31.15 in healthy subjects). Gender and diet had no influence on sweat Cl variability, nor had pubertal age and menstrual phase. Results of this pilot study confirmed that sweat Cl variability is high in CF patients, although non-CF individuals displayed even higher mean CV% values. Season significantly influenced sweat test values only in CF patients, likely due to changes in their hydration status. © 2018 Wiley Periodicals, Inc.

Retention of a resin-based sealant and a glass ionomer used as a fissure sealant: A comparative clinical study

Directory of Open Access Journals (Sweden)

Subramaniam P

2008-09-01

Full Text Available Sealing occlusal pits and fissures with resin-based sealants is a proven method of preventing occlusal caries. Retention of the sealant is very essential for its efficiency. This study evaluated the retention of glass ionomer used as a fissure sealant when compared to a self-cure resin-based sealant. One hundred and seven children between the ages of 6-9 years, with all four newly erupted permanent first molars were selected. Two permanent first molars on one side of the mouth were sealed with Delton, a resin-based sealant, and the contralateral two permanent first molars were sealed with Fuji VII glass ionomer cement. Evaluation of sealant retention was performed at regular intervals over 12 months, using Simonsen′s criteria. At the end of the study period, the retention of the resin sealant was seen to be superior to that of the glass ionomer sealant.

Permeability of fissured rock - an experimental study with special regard to the water injection test

International Nuclear Information System (INIS)

Schneider, H.J.

1987-01-01

The permeability to water of fissured rock is one of the most important design parameters for many underground projects, such as, e.g. the final deposition of radioactive waste. Because the conventional water injection test according to LUGEON for the calculation of permeability to water is associated with a high degree of uncertainty, new test equipment was developed. This equipment works on the principle of the water injection tracer test and multi-level measurements, enabling detailed measurement of the flow process at injection site and in the rock. The tests were carried out in Bunter sandstone and granite. The LUGEON test concept was varied in short-term and long-term tests at identical geological boundary conditions, and with test control at constant pressure on the one hand and at constant injection volume on the other. The test results show that non-steady-state flow occurs with short injection times, whereby the range is limited to the local rock at injection site. An increasing in injection time can lead to an increase in range by a number of factors as well as to steady-state flow conditions. The permeability of the rock types investigated is inhomgeneous and anistropic as a result of the fissured structure. (orig./HP) With 114 figs., 4 tabs [de

Long-term outcomes of Botulinum toxin in the treatment of chronic anal fissure: 5 years of follow-up.

Science.gov (United States)

Barbeiro, Sandra; Atalaia-Martins, Catarina; Marcos, Pedro; Gonçalves, Cláudia; Canhoto, Manuela; Arroja, Bruno; Silva, Filipe; Cotrim, Isabel; Eliseu, Liliana; Santos, Antonieta; Vasconcelos, Helena

2017-03-01

Chronic anal fissure is a frequent and disabling disease, often affecting young adults. Botulinum toxin and lateral internal sphincterotomy are the main therapeutic options for refractory cases. Botulinum toxin is minimally invasive and safer compared with surgery, which carries a difficult post-operative recovery and fecal incontinence risk. The long-term efficacy of Botulinum toxin is not well known. The aim of this study was to evaluate the long-term efficacy and safety of Botulinum toxin in the treatment of chronic anal fissure. This was a retrospective study at a single center, including patients treated with Botulinum toxin from 2005 to 2010, followed over at least a period of 5 years. All patients were treated with injection of 25U of Botulinum toxin in the intersphincteric groove. The response was registered as complete, partial, refractory and relapse. Botulinum toxin was administered to 126 patients, 69.8% ( n  = 88) were followed over a period of 5 years. After 3 months, 46.6% ( n  = 41) had complete response, 23.9% ( n  = 21) had partial response and 29.5% ( n  = 26) were refractory. Relapse was observed in 1.2% ( n  = 1) at 6 months, 11.4% ( n  = 10) at 1 year, 2.3% ( n  = 2) at 3 years; no relapse at 5 years. The overall success rate was 64.8% at 5 years of follow-up. Botulinum toxin was well tolerated by all patients and there were no complications. The use of Botulinum toxin to treat patients with chronic anal fissure was safe and effective in long-term follow-up.

What Makes Pseudomonas Aeruginosa Persist in the Lungs of CF Patients?

DEFF Research Database (Denmark)

Johansen, H.; Madsen Sommer, Lea Mette; Marvig, Rasmus Lykke

2015-01-01

The most important problem for cystic fibrosis (CF) patients is the airway infections responsible for the gradually decreasing lung function as the infections persist. We have investigated properties that may be involved in persistence of P. aeruginosa (PA) in the lungs of young CF children by co...

Final Technical Report for grant entitled "New Horizons in C-F Activation by Main Group Electrophiles"

Energy Technology Data Exchange (ETDEWEB)

Ozerov, Oleg V [Texas A& M University; Ozerov, Oleg V.

2014-01-16

We became interested in developing new methods for hydrodefluorination (HDF) and other types of C-F bond conversion in polyfluoroalkanes under mild conditions. We were attracted to an approach to C-F activation, where the key C-F cleavage proceeds by a Lewis acid abstraction of fluoride rather than a redox event. The efforts during the previous period were aimed at a) advancing the HDF reactivity with improvement in scope and catalyst longevity; b) extending C-F activation beyond HDF; c) generating insight about the elementary steps of the reaction and potential intermediates.

Understanding of safety monitoring in clinical trials by individuals with CF or their parents: A qualitative analysis.

Science.gov (United States)

Kern-Goldberger, Andrew S; Hessels, Amanda J; Saiman, Lisa; Quittell, Lynne M

2018-03-14

Recruiting both pediatric and adult participants for clinical trials in CF is currently of paramount importance as numerous new therapies are being developed. However, recruitment is challenging as parents of children with CF and adults with CF cite safety concerns as a principal barrier to enrollment. In conjunction with the CF Foundation (CFF) Data Safety Monitoring Board (DSMB), a pilot brochure was developed to inform patients and parents of the multiple levels of safety monitoring; the CFF simultaneously created an infographic representing the safety monitoring process. This study explores the attitudes and beliefs of CF patients and families regarding safety monitoring and clinical trial participation, and elicits feedback regarding the educational materials. Semi-structured interviews were conducted using a pre-tested interview guide and audio-recorded during routine CF clinic visits. Participants included 5 parents of children with CF quotations: attitudes toward clinical trials, safety values, conceptualizing the safety monitoring process, and priorities for delivery of patient education. Participant feedback was used to revise the pilot brochure; text was shortened, unfamiliar words clarified (e.g., "pipeline"), abbreviations eliminated, and redundancy avoided. Qualitative analysis of CF patient and family interviews provided insights into barriers to participation in clinical trials, safety concerns, perspectives on safety monitoring and educational priorities. We plan a multicenter study to determine if the revised brochure reduces knowledge, attitude and practice barriers regarding participation in CF clinical trials. Copyright © 2018 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

Modeling of the pollutant transport in fissured-porous media under consideration of colloids using the transport codes FRAME and COFRAME; Modellierung des Schadstofftransports in geklueftet-poroesen Medien unter Beruecksichtigung von Kolloiden mit den Transportprogrammen FRAME und COFRAME

Energy Technology Data Exchange (ETDEWEB)

Reiche, Tatiana; Noseck, Ulrich; Wolf, Jens Wilhelm

2014-05-15

For the long-term safety analysis of final nuclear waste repositories the transport of pollutants from the repository into the biosphere three mostly independent subsystems are considered: the near field, the geosphere and the biosphere. Normally rocks include fissures or other disturbances. Porous materials in the rock matrix have usually a high water content and acts as storage for pollutants due to sorption and diffusion processes. The aim of the project is the development of calculation modules for the code RepoTREND that simulate the pollutant transport in saturated fissured-porous media taking into account the effect of colloids. FRAME describes the pollutant dispersion in a fissured-porous medium and COFRAME the colloid influenced transport in a fissured-porous medium.

Caries progression in non-cavitated fissures after infiltrant application: a 3-year follow-up of a randomized controlled clinical trial

Directory of Open Access Journals (Sweden)

Camillo ANAUATE-NETTO

Full Text Available Abstract Objectives To evaluate the efficacy of a conservative treatment to prevent the progression of caries using an infiltrant on non-cavitated pit and fissures. Material and Methods This controlled clinical trial selected 23 volunteers with clinically and radiographically non-cavitated occlusal caries among patients presenting a “rather low” to “very high” caries risk. Eighty-six teeth were randomly divided into two experimental groups: teeth receiving a commercial pit-and-fissure sealant (Alpha Seal-DFL and contralateral teeth receiving Icon infiltrant (DMG. Caries progression was monitored by clinical (laser fluorescence caries detection and radiographic examination at 12-month intervals over a period of 3 years of monitored caries progression. Probing the sealing materials to detect areas of retention was also used to evaluate marginal integrity. Results Statistical analysis showed no difference in caries progression using laser fluorescence caries detection when both materials were compared, regardless of the evaluation times (p>0.05. No significance was observed when the marginal sealant integrity of both materials was compared, regardless of the evaluation time (p0.05. SEM analysis exhibited a more homogeneous sealing for the infiltrant than obtained by the sealant. Conclusions The infiltrant was effective to prevent the caries progression in non-cavitated pit-and-fissures after 3 years of clinical evaluation, comparable with the conventional sealant. The infiltrant also presented better results in terms of caries progression at the 3-year evaluation time using the radiographic analysis.

Caries progression in non-cavitated fissures after infiltrant application: a 3-year follow-up of a randomized controlled clinical trial

Science.gov (United States)

ANAUATE-NETTO, Camillo; BORELLI, Laurindo; AMORE, Ricardo; DI HIPÓLITO, Vinicius; D’ALPINO, Paulo Henrique Perlatti

2017-01-01

Abstract Objectives To evaluate the efficacy of a conservative treatment to prevent the progression of caries using an infiltrant on non-cavitated pit and fissures. Material and Methods This controlled clinical trial selected 23 volunteers with clinically and radiographically non-cavitated occlusal caries among patients presenting a “rather low” to “very high” caries risk. Eighty-six teeth were randomly divided into two experimental groups: teeth receiving a commercial pit-and-fissure sealant (Alpha Seal-DFL) and contralateral teeth receiving Icon infiltrant (DMG). Caries progression was monitored by clinical (laser fluorescence caries detection) and radiographic examination at 12-month intervals over a period of 3 years of monitored caries progression. Probing the sealing materials to detect areas of retention was also used to evaluate marginal integrity. Results Statistical analysis showed no difference in caries progression using laser fluorescence caries detection when both materials were compared, regardless of the evaluation times (p>0.05). No significance was observed when the marginal sealant integrity of both materials was compared, regardless of the evaluation time (p0.05). SEM analysis exhibited a more homogeneous sealing for the infiltrant than obtained by the sealant. Conclusions The infiltrant was effective to prevent the caries progression in non-cavitated pit-and-fissures after 3 years of clinical evaluation, comparable with the conventional sealant. The infiltrant also presented better results in terms of caries progression at the 3-year evaluation time using the radiographic analysis. PMID:28877284

A 1.7 MHz Chua's circuit using VMs and CF+s

OpenAIRE

Sánchez López, C

2012-01-01

In this paper, a high-frequency Chua's chaotic oscillator based on unity gain cells (UGCs) is introduced. Leveraging the internal buffers of the integrated circuit AD844, a voltage mirror (VM) and a positive current follower (CF+) are designed, taking into account the parasitic elements associated to each UGC. Afterwards, the behavior of the nonlinear resistor and of the grounded inductor are designed by using several VMs, CF+s, discrete capacitors and resistors. In this way, Chua's circuit i...

Rational design of organic superconductors through the use of the large, discrete molecular anions M(CF3)4-(M = Cu, Ag, Au) and SO3CF2CH2SF5-

International Nuclear Information System (INIS)

Schlueter, J.A.; Geiser, U.; Williams, J.M.

1996-01-01

A new approach to synthesis of organic superconductors has recently been pioneered which involves the use of large discrete molecular anions as the charge-compensating entities in these charge transfer salts. The organic electron-donor molecule bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF or ET) has been electrocrystallized with the novel organometallic M(CF 3 ) 4 - (M=Cu, Ag, Au) anions in a variety of 1,1,2-trihaloethane solvents. Over 20 organic superconductors have been synthesized which can be described by (ET) 2 M(CF 3 ) 4 (1,1,2- trihaloethane). These solvated salts are shown to have highly anisotropic physical properties which can be tuned via modifications of each of their three molecular components: ET electron donor molecule, M(CF 3 ) 4 - anion, and neutral 1,1,2- trihaloethane solvent molecule. Superconductivity has also been observed in an ET salt containing the discrete SF 5 CH 2 CF 2 SO 3 - anion with onset temperature near 5.2 K

Fatty acyltranferases in serum in cystic fibrosis (CF) patients

International Nuclear Information System (INIS)

Zielenski, J.; Newman, L.J.; Slomiany, B.L.; Slomiany, A.

1987-01-01

Studies on serum and gastrointestinal secretion from CF patient is suggest that defective accumulation of mucus in gastrointestinal tract and excessive amount of a protease resistant peptides in serum are related to the abnormal activity of enzymes responsible for fatty acylation of proteins. Here, the authors investigated the fatty acyltransferase activities in serum of normal and CF patients. A 15μl of serum was mixed with 0.85 nmol [ 14 C]palmitoyl CoA, 200μg of serine and threonine and incubated at 37 0 C for 30 min. The incubates were immediately frozen, dried extracted with C/M and chromatographed in chloroform/methanol/water. The incorporation of [ 14 C]palmitate was determined using linear radioscanner and authoradiography. The results of HPTLC revealed that CF serum in addition of ACAT and LCAT contained enzymes responsible for the transfer of [ 14 C]palmitate to monoacylphosphoglycerides, and serine and threonine. In normal serum the formation of a small amount of palmitoyl serine and palmitoyl threonine was also observed but the acylation of monoacylphosphoglycerides was not detectable. The authors conclude that in cystic fibrosis the abnormal fatty acyltransferases are responsible for the occurrence of protease resistant glycoprotein, unusual peptides in serum and possibly for the modification of membrane proteins and lipids

cfDNA as an Earlier Predictor of Exercise-Induced Performance Decrement Related to Muscle Damage.

Science.gov (United States)

Andreatta, Michely V; Curty, Victor M; Coutinho, João Victor S; Santos, Miguel Ângelo A; Vassallo, Paula F; de Sousa, Nuno F; Barauna, Valério G

2017-11-28

The aims of this study were: a) to evaluate whether cell-free DNA (cfDNA) levels increase immediately after an acute light and heavy resistance exercise (RE) bout, and b) to whether cfDNA levels are associated with functional muscle capacity until 48hrs after exercise session. Twenty healthy volunteers performed 3 sets of the leg press resistance exercise with 80% of 1RM (RE80) or 40% of 1RM (RE40) with similar exercise volume. Blood lactate was measured after completion of the 3 sets. Creatine kinase (CK), cfDNA and jump performance were evaluated before (pre) exercise, immediately post-exercise (Post-0) and every 24hrs until 48hrs. Lactate concentration increased similarly in both groups (RE40, 4.0±1.3mmol/L; RE80, 4.8±1.3mmol/L). No changes were observed in squat jump and countermovement jump performance after RE40, however both jumps remained reduced until 48h in RE80 group. CK concentration increased post-24h only in the RE80 group (Pre: 128.8±73.7U/L to Post-24h: 313.8±116.4U/L). cfDNA concentration increased post-0h only in the RE80 group (Pre, 249.8±82.3ng/mL; Post-0h, 406.3±67.2ng/mL). There was a negative correlation between post-0h cfDNA concentration and post-24h squat jump (r=-0.521; p=0.01) and post-0h cfDNA concentration and post-24h countermovement jump (r=-0.539; p=0.01). cfDNA increases in responsive to RE intensity even when not performed until exhaustion. cfDNA measured immediately after RE is a promising biomarker for muscle performance decrement until 48hrs of a RE bout.

Applying psychological theories to evidence-based clinical practice: identifying factors predictive of placing preventive fissure sealants.

Science.gov (United States)

Bonetti, Debbie; Johnston, Marie; Clarkson, Jan E; Grimshaw, Jeremy; Pitts, Nigel B; Eccles, Martin; Steen, Nick; Thomas, Ruth; Maclennan, Graeme; Glidewell, Liz; Walker, Anne

2010-04-08

Psychological models are used to understand and predict behaviour in a wide range of settings, but have not been consistently applied to health professional behaviours, and the contribution of differing theories is not clear. This study explored the usefulness of a range of models to predict an evidence-based behaviour -- the placing of fissure sealants. Measures were collected by postal questionnaire from a random sample of general dental practitioners (GDPs) in Scotland. Outcomes were behavioural simulation (scenario decision-making), and behavioural intention. Predictor variables were from the Theory of Planned Behaviour (TPB), Social Cognitive Theory (SCT), Common Sense Self-regulation Model (CS-SRM), Operant Learning Theory (OLT), Implementation Intention (II), Stage Model, and knowledge (a non-theoretical construct). Multiple regression analysis was used to examine the predictive value of each theoretical model individually. Significant constructs from all theories were then entered into a 'cross theory' stepwise regression analysis to investigate their combined predictive value. Behavioural simulation - theory level variance explained was: TPB 31%; SCT 29%; II 7%; OLT 30%. Neither CS-SRM nor stage explained significant variance. In the cross theory analysis, habit (OLT), timeline acute (CS-SRM), and outcome expectancy (SCT) entered the equation, together explaining 38% of the variance. Behavioural intention - theory level variance explained was: TPB 30%; SCT 24%; OLT 58%, CS-SRM 27%. GDPs in the action stage had significantly higher intention to place fissure sealants. In the cross theory analysis, habit (OLT) and attitude (TPB) entered the equation, together explaining 68% of the variance in intention. The study provides evidence that psychological models can be useful in understanding and predicting clinical behaviour. Taking a theory-based approach enables the creation of a replicable methodology for identifying factors that may predict clinical behaviour

Hydrogen effects in hydrofluorocarbon plasma etching of silicon nitride: Beam study with CF{sup +}, CF{sub 2}{sup +}, CHF{sub 2}{sup +}, and CH{sub 2}F{sup +} ions

Energy Technology Data Exchange (ETDEWEB)

Ito, Tomoko; Karahashi, Kazuhiro; Fukasawa, Masanaga; Tatsumi, Tetsuya; Hamaguchi, Satoshi [Center for Atomic and Molecular Technologies, Osaka University, Osaka 565-0871 (Japan); Semiconductor Technology Development Division, SBG, CPDG, Sony Corporation, Atsugi, Kanagawa 243-0014 (Japan); Center for Atomic and Molecular Technologies, Osaka University, Osaka 565-0871 (Japan)

2011-09-15

Hydrogen in hydrofluorocarbon plasmas plays an important role in silicon nitride (Si{sub 3}N{sub 4}) reactive ion etching. This study focuses on the elementary reactions of energetic CHF{sub 2}{sup +} and CH{sub 2}F{sup +} ions with Si{sub 3}N{sub 4} surfaces. In the experiments, Si{sub 3}N{sub 4} surfaces were irradiated by monoenergetic (500-1500 eV) beams of CHF{sub 2}{sup +} and CH{sub 2}F{sup +} ions as well as hydrogen-free CF{sub 2}{sup +} and CF{sup +} ions generated by a mass-selected ion beam system and their etching yields and surface properties were examined. It has been found that, when etching takes place, the etching rates of Si{sub 3}N{sub 4} by hydrofluorocarbon ions, i.e., CHF{sub 2}{sup +} and CH{sub 2}F{sup +}, are higher than those by the corresponding fluorocarbon ions, i.e., CF{sub 2}{sup +} and CF{sup +}, respectively. When carbon film deposition takes place, it has been found that hydrogen of incident hydrofluorocarbon ions tends to scavenge fluorine of the deposited film, reducing its fluorine content.

Comparison of microleakage between flowable nanocomposite, flowable Composite and Conventional sealant in fissure sealant therapy of the permanent teeth: an in- vitro study

Directory of Open Access Journals (Sweden)

Sara Maleki Kambakhsh

2016-11-01

Full Text Available Background and Aim: Novel dental materials including nanocomposites have been introduced in recent years. It is claimed that they have superior properties such as high esthetic., low wear, increased filler content resulting in better mechanical properties, and releasing ions i.e. fluoride and amorphous calcium phosphate that are important for enamel remineralization. Considering these features, if they have retention and microleakage rates comparable with conventional sealants, these materials can be appropriate alternatives to conventional resin sealants in future. The current study aimed at comparing . microleakage of a flowable nanocomposite, a flowable composite , and a conventional sealant in fissure sealant therapy of the permanent teeth. Materials and Methods: First of all ,42 extracted sound human maxillary first premolars were collected and were randomly divided into 3 equal groups. Then the teeth were embedded in self-cure acrylic resin. Occlusal fissures of the samples were cleaned using explorer, enameloplasty with ¼ round diamond bur and water/air spray was done. The prepared surfaces were etched using 36% phosphoric acid gel for 15s, rinsed and dried. Bonding agent was placed in the pits and fissures, cured for 10s after thinning with air. In the first, second , and the third group conventional sealant, flowable composite , and flowable nanocomposite were placed, respectively; and light cured for 40s. The samples were thermocycled (1000 cycles between 5-55ºC and then immersed in 2% basic Fuchsine solution for 24hs. They were then cut bucculingually and microleakage evaluation was done using stereomicroscope. The obtained data was analyzed using Kruskal wallis tests. Results: There was no significant difference in microleakage rate of the study groups. (P>0.05. Conclusion: Considering the condition of the study, it can be concluded that flowable composite and flowable nanocomposite can be used as suitable alternatives to

Preparation & characterization of SiO2 interface layer by dip coating technique on carbon fibre for Cf/SiC composites

Science.gov (United States)

Kumar, Kundan; Jariwala, C.; Pillai, R.; Chauhan, N.; Raole, P. M.

2015-08-01

Carbon fibres (Cf) are one of the most important reinforced materials for ceramic matrix composites such as Cf - SiC composites and they are generally sought for high temperature applications in as space application, nuclear reactor and automobile industries. But the major problem arise when Cf reinforced composites exposed to high temperature in an oxidizing environment, Cf react with oxygen and burnt away. In present work, we have studied the effect of silica (SiO2) coating as a protective coating on Cf for the Cf / SiC composites. The silica solution prepared by the sol-gel process and coating on Cf is done by dip coating technique with varying the withdrawing speed i.e. 2, 5, 8 mm/s with fixed dipping cycle (3 Nos.). The uniform silica coating on the Cf is shown by the Scanning Electron Microscope (SEM) analysis. The tensile test shows the increase in tensile strength with respect to increase in withdrawing speed. The isothermal oxidation analysis confirmed enhancement of oxidation resistance of silica coated Cf as compared tothe uncoated Cf.

Frequency of remnants of sealants left behind in pits and fissures of occlusal surfaces after 2 and 3 years.

NARCIS (Netherlands)

Hu, X.; Zhang, W.; Fan, M.; Mulder, J.; Frencken, J.E.F.M.

2017-01-01

OBJECTIVES: The null-hypothesis tested was that there was no difference in the frequency of remnants of high-viscosity glass-ionomer sealants left behind in pits and fissures of occlusal surfaces of first permanent molars and that of resin composite and glass-carbomer sealants. MATERIALS AND

Hydrophobic treatment on polymethylmethacrylate surface by nanosecond-pulse DBDs in CF{sub 4} at atmospheric pressure

Energy Technology Data Exchange (ETDEWEB)

Zhang, Cheng [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Key Laboratory of Power Electronics and Electric Drive, Chinese Academy of Sciences, Beijing 100190 (China); Zhou, Yang [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Shao, Tao, E-mail: st@mail.iee.ac.cn [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Key Laboratory of Power Electronics and Electric Drive, Chinese Academy of Sciences, Beijing 100190 (China); Xie, Qing [State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Baoding 071003 (China); Xu, Jiayu [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Yang, Wenjin [Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Key Laboratory of Power Electronics and Electric Drive, Chinese Academy of Sciences, Beijing 100190 (China)

2014-08-30

Highlights: • Increase in hydrophobicity on PMMA is achieved after the DBD treatment in CF{sub 4}, and the water contact angle can increase from 68° to 100° after treatment. • Nanosecond-pulse DBD is used for the surface treatment and the power density is about 114.8 mW/cm{sup 2}. • The effects of applied voltage, CF{sub 4} flow, and time on plasma treatment are investigated. • Plasma treatment causes morphological change, significantly increases the roughness of the surface, and introduces fluorine-containing groups into the polymethylmethacrylate surface. • Hydrophobic behavior of the treated PMMA surface is slightly affected by the aging effect. - Abstract: Nanosecond-pulse dielectric barrier discharge (DBD) can provide non-thermal plasmas with extremely high energy and high density, which can result in a series of complicated physical and chemical reactions in the surface treatment of polymers. Therefore, in this paper, hydrophobic treatment of polymethylmethacrylate (PMMA) surface is conducted by nanosecond-pulse DBD in carbon tetrafluoride (CF{sub 4}) at atmospheric pressure. Investigations on surface morphology and chemical composition before and after the DBD treatment in CF{sub 4} are conducted with the contact angle measurement, atomic force microscope, Fourier transform infrared spectroscopy, and X-ray photoelectron spectrometer. The effects of the applied voltage, CF{sub 4} flow rate, and treatment time on the hydrophobic modification are studied. Results show that the contact angles of the treated PMMA surface increases with the applied voltage, and it could be greatly affected by the CF{sub 4} flow rate and the treatment time. The water contact angle can increase from 68° to 100° after the treatment. Furthermore, both surface morphology and chemical composition of the PMMA samples are changed. Both the increase of the surface roughness and the occurrence of fluorine-containing functional groups on the PMMA surface treated by DBD in CF

Antibiotic therapy for stable non-CF bronchiectasis in adults

DEFF Research Database (Denmark)

Fjaellegaard, Katrine; Sin, Melda Dönmez; Browatzki, Andrea

2017-01-01

To provide an update on efficacy and safety of antibiotic treatments for stable non-cystic fibrosis (CF) bronchiectasis (BE). Systematic review based on the Preferred Reporting Items for Systematic reviews and Meta-Analyses guidelines was done. Twenty-six studies (1.898 patients) fulfilled......, exacerbations and QoL, whereas studies on aztreonam revealed no significant clinical improvements in the outcomes of interest, including exacerbation rate. Adverse events, including bronchospasm, have been reported in association with tobramycin and aztreonam. Several antibiotic treatment regimens have been...... shown to improve QoL and exacerbation rate, whereas findings regarding sputum production, lung function and admissions have been conflicting. Evidence-based treatment algorithms for antibiotic treatment of stable non-CF BE will have to await large-scale, long-term controlled studies....

Experimental ion mobility measurements in Xe-CF4 mixtures

Science.gov (United States)

Cortez, A. F. V.; Kaja, M. A.; Escada, J.; Santos, M. A. G.; Veenhof, R.; Neves, P. N. B.; Santos, F. P.; Borges, F. I. G. M.; Conde, C. A. N.

2018-04-01

In this paper we present the results of the ion mobility measurements made in gaseous mixtures of xenon with carbon tetrafluoride (Xe-CF4) for pressures ranging from 6 to 10 Torr (8-10.6 mbar) and for low reduced electric fields in the 10 to 25 Td range (2.4-6.1 kVṡcm‑1ṡbar‑1), at room temperature. The time-of-arrival spectra revealed one or two peaks depending on the gas relative abundances, which were attributed to CF3+ and to Xe2+ ions. However, for Xe concentrations above 60%, only one peak remains (Xe2+). The reduced mobilities obtained from the peak centroid of the time-of-arrival spectra are presented for Xe concentrations in the 5%-95% range.

Designing a SCAR molecular marker for monitoring Trichoderma cf. harzianum in experimental communities* #

Science.gov (United States)

Pérez, Gabriel; Verdejo, Valentina; Gondim-Porto, Clarissa; Orlando, Julieta; Carú, Margarita

2014-01-01

Several species of the fungal genus Trichoderma establish biological interactions with various micro- and macro-organisms. Some of these interactions are relevant in ecological terms and in biotechnological applications, such as biocontrol, where Trichoderma could be considered as an invasive species that colonizes a recipient community. The success of this invasion depends on multiple factors, which can be assayed using experimental communities as study models. Therefore, the aim of this work is to develop a species-specific sequence-characterized amplified region (SCAR) marker to monitor the colonization and growth of T. cf. harzianum when it invades experimental communities. For this study, 16 randomly amplified polymorphic DNA (RAPD) primers of 10-mer were used to generate polymorphic patterns, one of which generated a band present only in strains of T. cf. harzianum. This band was cloned, sequenced, and five primers of 20–23 mer were designed. Primer pairs 2F2/2R2 and 2F2/2R3 successfully and specifically amplified fragments of 278 and 448 bp from the T. cf. harzianum BpT10a strain DNA, respectively. Both primer pairs were also tested against the DNA from 14 strains of T. cf. harzianum and several strains of different fungal genera as specificity controls. Only the DNA from the strains of T. cf. harzianum was successfully amplified. Moreover, primer pair 2F2/2R2 was assessed by quantitative real-time polymerase chain reaction (PCR) using fungal DNA mixtures and DNA extracted from fungal experimental communities as templates. T. cf. harzianum was detectable even when as few as 100 copies of the SCAR marker were available or even when its population represented only 0.1% of the whole community. PMID:25367789

Designing a SCAR molecular marker for monitoring Trichoderma cf. harzianum in experimental communities.

Science.gov (United States)

Pérez, Gabriel; Verdejo, Valentina; Gondim-Porto, Clarissa; Orlando, Julieta; Carú, Margarita

2014-11-01

Several species of the fungal genus Trichoderma establish biological interactions with various micro- and macro-organisms. Some of these interactions are relevant in ecological terms and in biotechnological applications, such as biocontrol, where Trichoderma could be considered as an invasive species that colonizes a recipient community. The success of this invasion depends on multiple factors, which can be assayed using experimental communities as study models. Therefore, the aim of this work is to develop a species-specific sequence-characterized amplified region (SCAR) marker to monitor the colonization and growth of T. cf. harzianum when it invades experimental communities. For this study, 16 randomly amplified polymorphic DNA (RAPD) primers of 10-mer were used to generate polymorphic patterns, one of which generated a band present only in strains of T. cf. harzianum. This band was cloned, sequenced, and five primers of 20-23 mer were designed. Primer pairs 2F2/2R2 and 2F2/2R3 successfully and specifically amplified fragments of 278 and 448 bp from the T. cf. harzianum BpT10a strain DNA, respectively. Both primer pairs were also tested against the DNA from 14 strains of T. cf. harzianum and several strains of different fungal genera as specificity controls. Only the DNA from the strains of T. cf. harzianum was successfully amplified. Moreover, primer pair 2F2/2R2 was assessed by quantitative real-time polymerase chain reaction (PCR) using fungal DNA mixtures and DNA extracted from fungal experimental communities as templates. T. cf. harzianum was detectable even when as few as 100 copies of the SCAR marker were available or even when its population represented only 0.1% of the whole community.

Ostreopsis cf. ovata dynamics in the NW Mediterranean Sea in relation to biotic and abiotic factors

Energy Technology Data Exchange (ETDEWEB)

Carnicer, Olga [IRTA, Carretera de Poble Nou, km 5.5, 43540 Sant Carles de la Ràpita (Spain); Guallar, Carles [IRTA, Carretera de Poble Nou, km 5.5, 43540 Sant Carles de la Ràpita (Spain); IFREMER, DYNECO-PELAGOS Centre de Brest, Pointe du Diable BP70, 29280 Plouzane (France); Andree, Karl B.; Diogène, Jorge [IRTA, Carretera de Poble Nou, km 5.5, 43540 Sant Carles de la Ràpita (Spain); Fernández-Tejedor, Margarita, E-mail: margarita.fernandez@irta.cat [IRTA, Carretera de Poble Nou, km 5.5, 43540 Sant Carles de la Ràpita (Spain)

2015-11-15

An expansion of the distribution of Ostreopsis cf. ovata, a dinoflagellate which produces palytoxin-like compounds, has been reported in recent years. Economical and social interests are affected by blooms, as they are responsible for respiratory and skin problems in humans and may cause damage to marine organisms. In order to identify the most influential environmental factors that trigger proliferations of O. cf. ovata in the area of the adjacent shallow rocky coast of the Ebro Delta (NW Mediterranean Sea) a three-year survey was performed on the metaphytic microalgae community growing on the macrophytes Jania rubens and Corallina elongata. Small-size diatoms were more abundant than dinoflagellates; O. cf. ovata was identified as the only species present from the genus. Seawater temperature was the primary driver defining the ecological niche of O. cf. ovata. Freshwater and groundwater fluxes were more pronounced in southern than in northern sites, which may have resulted in a distinct O. cf. ovata spatial distribution, with the highest records of abundance and more frequent blooms in the north. In consequence, negative correlations between the abundance of O. cf. ovata and nitrate concentrations and significant positive correlation with salinity were observed. The temporal pattern of O. cf. ovata dynamics from mid-July to early-November is probably due to the fact that this species is observed only above a certain threshold temperature of seawater. Metaphytic cells of O. cf. ovata were smaller in the northern site than in the south, possibly as a result of an increase in cell division, coinciding with higher abundance, and this could be an indicator of favorable conditions. Toxicity in planktonic cells was negatively correlated with cell abundance in the water column, achieving maximum concentrations of 25 pg. PLTX eq cell{sup −1}. - Highlights: • Presence of a single Ostreopsis genotype in confirmed through qPCR. • Temperature confirmed as the most

A clinical trial to evaluate the retention of a silver cermet-ionomer cement used as a fissure sealant.

Science.gov (United States)

Mills, R W; Ball, I A

1993-01-01

A randomized clinical trial was under-taken to compare the retention of a silver cermet-ionomer cement, Ketac Silver, with a conventional, autopolymerizing BIS-GMA resin sealant, Delton, using matched pairs of fissure sites within each subject's mouth. One hundred twenty matched contralateral pairs of fissure sites in first and second permanent molars of 53 school children were sealed with the two materials. The choice of site and material was selected at random. The ages of the children ranged from five to 16 years; first permanent molars were sealed in the five- to 10-year age group, and second permanent molars in the 11- to 16-year age group. Sealants were assessed as present, partly present, or absent at 6, 12, and 24 months. The number of pairs of sites available for reassessment declined from 102 at six months to 59 at 24 months as patients were lost to the study. Retention rates were higher for the Ketac Silver sealants at all three inspection intervals (P cermet cement was better retained than conventional resin sealants in younger children.

Origins of feeding arteries of hepatocellular carcinoma located near the umbilical fissure of the left hepatic lobe: angiographic evaluation.

Science.gov (United States)

Miyayama, Shiro; Yamashiro, Masashi; Shibata, Yoshihiro; Hashimoto, Masahiro; Yoshida, Miki; Tsuji, Kazunobu; Toshima, Fumihito; Matsui, Osamu

2012-12-01

To analyze the origins of the feeding arteries of hepatocellular carcinomas (HCCs) near the umbilical fissure of the left hepatic lobe. Twenty-eight HCCs with a mean ± SD tumor diameter of 3.4 ± 1.0 cm (range 1-4.4 cm) in contact with the right or left side of the umbilical fissure were treated by superselective transcatheter arterial chemoembolization (TACE). The origins of the tumor-feeding arteries were analyzed with arteriograms and computed tomography or cone-beam computed tomography images obtained during and 1 week after TACE. Twenty-one HCC lesions were located in segment 3 and seven were located in segment 4. Of 21 tumors in segment 3, 13 (61.9%) were supplied by the lateral inferior subsegmental artery (A3), three (14.3%) by the medial subsegmental artery (A4), three (14.3%) by both A4 and A3, one (4.8%) by a branch arising from the left lateral hepatic artery, and one (4.8%) by a branch of the right gastric artery. In particular, all tumor-feeding branches arising from A4 were the first branch of A4. Of seven tumors in segment 4, four (57.1%) were supplied by A4 and three (42.9%) by A3. In particular, all tumor-feeding branches arising from A3 were the first branch of A3. This study demonstrates crossover blood supply to HCC lesions located near the umbilical fissure, in addition to direct feeding from a separate branch. In particular, the first branch of the opposite subsegmental artery may feed tumors when crossover blood supply is present.

Origins of Feeding Arteries of Hepatocellular Carcinoma Located Near the Umbilical Fissure of the Left Hepatic Lobe: Angiographic Evaluation

Energy Technology Data Exchange (ETDEWEB)

Miyayama, Shiro, E-mail: s-miyayama@fukui.saiseikai.or.jp; Yamashiro, Masashi; Shibata, Yoshihiro; Hashimoto, Masahiro; Yoshida, Miki; Tsuji, Kazunobu; Toshima, Fumihito [Fukuiken Saiseikai Hospital, Department of Diagnostic Radiology (Japan); Matsui, Osamu [Kanazawa University Graduate School of Medical Science, Department of Radiology (Japan)

2012-12-15

Purpose: To analyze the origins of the feeding arteries of hepatocellular carcinomas (HCCs) near the umbilical fissure of the left hepatic lobe. Methods: Twenty-eight HCCs with a mean {+-} SD tumor diameter of 3.4 {+-} 1.0 cm (range 1-4.4 cm) in contact with the right or left side of the umbilical fissure were treated by superselective transcatheter arterial chemoembolization (TACE). The origins of the tumor-feeding arteries were analyzed with arteriograms and computed tomography or cone-beam computed tomography images obtained during and 1 week after TACE.ResultsTwenty-one HCC lesions were located in segment 3 and seven were located in segment 4. Of 21 tumors in segment 3, 13 (61.9%) were supplied by the lateral inferior subsegmental artery (A3), three (14.3%) by the medial subsegmental artery (A4), three (14.3%) by both A4 and A3, one (4.8%) by a branch arising from the left lateral hepatic artery, and one (4.8%) by a branch of the right gastric artery. In particular, all tumor-feeding branches arising from A4 were the first branch of A4. Of seven tumors in segment 4, four (57.1%) were supplied by A4 and three (42.9%) by A3. In particular, all tumor-feeding branches arising from A3 were the first branch of A3. Conclusion: This study demonstrates crossover blood supply to HCC lesions located near the umbilical fissure, in addition to direct feeding from a separate branch. In particular, the first branch of the opposite subsegmental artery may feed tumors when crossover blood supply is present.

Quenching the scintillation in CF{sub 4} Cherenkov gas radiator

Energy Technology Data Exchange (ETDEWEB)

Blake, T. [Department of Physics, University of Warwick, Coventry (United Kingdom); D' Ambrosio, C. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Easo, S. [STFC Rutherford Appleton Laboratory, Didcot (United Kingdom); European Organization for Nuclear Research (CERN), Geneva (Switzerland); Eisenhardt, S. [School of Physics and Astronomy, University of Edinburgh, Edinburgh (United Kingdom); Fitzpatrick, C. [Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne (Switzerland); Forty, R.; Frei, C. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Gibson, V. [Cavendish Laboratory, University of Cambridge, Cambridge (United Kingdom); Gys, T. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Harnew, N.; Hunt, P. [Department of Physics, University of Oxford, Oxford (United Kingdom); Jones, C.R. [Cavendish Laboratory, University of Cambridge, Cambridge (United Kingdom); Lambert, R.W. [Nikhef National Institute for Subatomic Physics and VU University Amsterdam, Amsterdam (Netherlands); Matteuzzi, C. [Sezione INFN di Milano Bicocca, Milano (Italy); Muheim, F. [School of Physics and Astronomy, University of Edinburgh, Edinburgh (United Kingdom); Papanestis, A., E-mail: antonis.papanestis@stfc.ac.uk [STFC Rutherford Appleton Laboratory, Didcot (United Kingdom); European Organization for Nuclear Research (CERN), Geneva (Switzerland); Perego, D.L. [Sezione INFN di Milano Bicocca, Milano (Italy); Università di Milano Bicocca, Milano (Italy); Piedigrossi, D. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Plackett, R. [Imperial College London, London (United Kingdom); Powell, A. [Department of Physics, University of Oxford, Oxford (United Kingdom); and others

2015-08-11

CF{sub 4} is used as a Cherenkov gas radiator in one of the Ring Imaging Cherenkov detectors at the LHCb experiment at the CERN Large Hadron Collider. CF{sub 4} is well known to have a high scintillation photon yield in the near and far VUV, UV and in the visible wavelength range. A large flux of scintillation photons in our photon detection acceptance between 200 and 800 nm could compromise the particle identification efficiency. We will show that this scintillation photon emission system can be effectively quenched, consistent with radiationless transitions, with no significant impact on the photons resulting from Cherenkov radiation.

VizieR Online Data Catalog: SNe II light curves & spectra from the CfA (Hicken+, 2017)

Science.gov (United States)

Hicken, M.; Friedman, A. S.; Blondin, S.; Challis, P.; Berlind, P.; Calkins, M.; Esquerdo, G.; Matheson, T.; Modjaz, M.; Rest, A.; Kirshner, R. P.

2018-01-01

Since all of the optical photometry reported here was produced as part of the CfA3 and CfA4 processing campaigns, see Hicken+ (2009, J/ApJ/700/331) and Hicken+ (2012, J/ApJS/200/12) for greater details on the instruments, observations, photometry pipeline, calibration, and host-galaxy subtraction used to create the CfA SN II light curves. (8 data files).

Creep and Oxidation Behavior of Modified CF8C-Plus with W, Cu, Ni, and Cr

Science.gov (United States)

Unocic, Kinga A.; Dryepondt, Sebastien; Yamamoto, Yukinori; Maziasz, Philip J.

2016-04-01

The microstructures of modified CF8C-Plus (Fe-19Cr-12Ni-0.4W-3.8Mn-0.2Mo-0.6Nb-0.5Si-0.9C) with W and Cu (CF8CPWCu) and CF8CPWCu enhanced with 21Cr + 15Ni or 22Cr + 17.5Ni were characterized in the as-cast condition and after creep testing. When imaged at lower magnifications, the as-cast microstructure was similar among all three alloys as they all contained a Nb-rich interdendritic phase and Mn-based inclusions. Transmission electron microscopy (TEM) analysis showed the presence of nanoscale Cu-rich nanoprecipitates distributed uniformly throughout the matrix of CF8CPWCu, whereas in CF8CPWCu22/17, Cu precipitates were found primarily at the grain boundaries. The presence of these nanoscale Cu-rich particles, in addition to W-rich Cr23C6, nanoscale Nb carbides, and Z-phase (Nb2Cr2N2), improved the creep strength of the CF8CPWCu steel. Modification of CF8CPWCu with Cr and Ni contents slightly decreased the creep strength but significantly improved the oxidation behavior at 1073 K (800 °C). In particular, the addition of 22Cr and 17.5Ni strongly enhanced the oxidation resistance of the stainless steel resulting in a 100 degrees or greater temperature improvement, and this composition provided the best balance between improving both mechanical properties and oxidation resistance.

Mechanistic study on the fluorination of K[B(CN)4] with ClF enabling the high yield and large scale synthesis of K[B(CF3)4] and K[(CF3)3BCN].

Science.gov (United States)

Bernhardt, Eduard; Finze, Maik; Willner, Helge

2011-10-17

The fluorination of K[B(CN)(4)] with ClF is studied by millimolar test reactions in aHF and CH(2)Cl(2) solution and by subsequent identification of intermediates such as B-CF═NCl, B-CF(2)-NCl(2), and B-CF(3) species as well as NCl(3) by (19)F, (11)B NMR, and Raman spectroscopy, respectively. At first one cyano group of K[B(CN)(4)] is converted fast into a CF(3) group, and with increasing fluorination the reaction becomes slower and several intermediates could be observed. On the basis of these results, a synthesis was developed for K[B(CF(3))(4)] on a 0.2 molar scale by treatment of K[B(CN)(4)] diluted in aHF with ClF. The course of the reactions was followed by (i) monitoring the vapor pressure inside the reactor, (ii) observing the heat dissipation during ClF uptake, and (iii) measuring the volume of the released nitrogen gas. Since the fluorination of the last cyano group proceeds very slowly, the selective synthesis of K[(CF(3))(3)BCN] on a 0.2 molar scale is possible, as well. The analysis of the mechanisms, thermodynamics, and kinetics of the fluorination reactions is supported by density functional theory (DFT) calculations.

Determination of disintegration half-life of 252Cf

International Nuclear Information System (INIS)

Chen Keliang; Liu Guoxing; Wang Sufang; Zheng Jiwen

1991-01-01

The follow-up measurements have been made by using a Si(Au) detector with small solid angle geometry for α disintegration of 252 Cf. The measured half-life of disintegration is 2.638 ± 0.009 year. This value is in accordance with other previous results

Properties of CF/PA6 friction spun hybrid yarns for textile reinforced thermoplastic composites

Science.gov (United States)

Hasan, MMB; Nitsche, S.; Abdkader, A.; Cherif, Ch

2017-10-01

Due to their excellent strength, rigidity and damping properties as well as low weight, carbon fibre reinforced composites (CFRC) are widely being used for load bearing structures. On the other hand, with an increased demand und usage of CFRCs, effective methods to re-use waste carbon fibre (CF) materials, which are recoverable either from the process scraps or from the end-of-life components are attracting increased attention. In this paper, hybrid yarns consisting of staple CF and polyamide 6 (PA 6) are manufactured on a DREF-3000 friction spinning machine with various machine parameters such as spinning drum speed and suction air pressure. The relationship between different textile physical properties of the hybrid yarns, such as tensile strength and elongation with different spinning parameters and CF content of hybrid yarn is investigated. Furthermore, the tensile properties of uni-directional (UD) composites manufactured from the developed hybrid yarn shows 80% of the UD composite strength made from CF filament yarn.

The Safety and Efficacy of a Mixture of Honey, Olive Oil, and Beeswax for the Management of Hemorrhoids and Anal Fissure: A Pilot Study

Directory of Open Access Journals (Sweden)

Noori S. Al-Waili

2006-01-01

Full Text Available We have found that a mixture of honey, olive oil, and beeswax was effective for treatment of diaper dermatitis, psoriasis, eczema, and skin fungal infection. The mixture has antibacterial properties. A prospective pilot study was conducted to evaluate the therapeutic effect of topical application of the mixture on patients with anal fissure or hemorrhoids.Fifteen consecutive patients, 13 males and 2 females, median age 45 years (range: 28–70, who presented with anal fissure (5 patients or first- to third-degree hemorrhoids (4 with first degree, 4 with second degree, and 2 with third degree, were treated with a 12-h application of a natural mixture containing honey, olive oil, and beeswax in ratio of 1:1:1(v/v/v. Bleeding, itching, edema, and erythema were measured using a scoring method: 0 = none, 1 = mild, 2 = moderate, 3 = severe, and 4 = very severe. The pain score was checked using a visual analog scale (minimum = 0, maximum = 10. Efficacy of treatment was assessed by comparing the symptoms' score before and after treatment; at weekly intervals for a maximum of 4 weeks. The patients were observed for evidence of any adverse effect such as appearance of new signs and symptoms, or worsening of the existing symptoms. The honey mixture significantly reduced bleeding and relieved itching in patients with hemorrhoids. Patients with anal fissure showed significant reduction in pain, bleeding, and itching after the treatment. No side effect was reported with use of the mixture. We conclude that a mixture of honey, olive oil, and beeswax is safe and clinically effective in the treatment of hemorrhoids and anal fissure, which paves the way for further randomized double blind studies.

Reactor production of 252Cf and transcurium isotopes

International Nuclear Information System (INIS)

Alexander, C.W.; Halperin, J.; Walker, R.L.; Bigelow, J.E.

1990-01-01

Berkelium, californium, einsteinium, and fermium are currently produced in the High Flux Isotope Reactor (HFIR) and recovered in the Radiochemical Engineering Development Center (REDC) at the Oak Ridge National Laboratory (ORNL). All the isotopes are used for research. In addition, 252 Cf, 253 Es, and 255 Fm have been considered or are used for industrial or medical applications. ORNL is the sole producer of these transcurium isotopes in the western world. A wide range of actinide samples were irradiated in special test assemblies at the Fast Flux Test Facility (FFTF) at Hanford, Washington. The purpose of the experiments was to evaluate the usefulness of the two-group flux model for transmutations in the special assemblies with an eventual goal of determining the feasibility of producing macro amounts of transcurium isotopes in the FFTF. Preliminary results from the production of 254g Es from 252 Cf will be discussed. 14 refs., 5 tabs

Ostreopsis cf. ovata dynamics in the NW Mediterranean Sea in relation to biotic and abiotic factors.

Science.gov (United States)

Carnicer, Olga; Guallar, Carles; Andree, Karl B; Diogène, Jorge; Fernández-Tejedor, Margarita

2015-11-01

An expansion of the distribution of Ostreopsis cf. ovata, a dinoflagellate which produces palytoxin-like compounds, has been reported in recent years. Economical and social interests are affected by blooms, as they are responsible for respiratory and skin problems in humans and may cause damage to marine organisms. In order to identify the most influential environmental factors that trigger proliferations of O. cf. ovata in the area of the adjacent shallow rocky coast of the Ebro Delta (NW Mediterranean Sea) a three-year survey was performed on the metaphytic microalgae community growing on the macrophytes Jania rubens and Corallina elongata. Small-size diatoms were more abundant than dinoflagellates; O. cf. ovata was identified as the only species present from the genus. Seawater temperature was the primary driver defining the ecological niche of O. cf. ovata. Freshwater and groundwater fluxes were more pronounced in southern than in northern sites, which may have resulted in a distinct O. cf. ovata spatial distribution, with the highest records of abundance and more frequent blooms in the north. In consequence, negative correlations between the abundance of O. cf. ovata and nitrate concentrations and significant positive correlation with salinity were observed. The temporal pattern of O. cf. ovata dynamics from mid-July to early-November is probably due to the fact that this species is observed only above a certain threshold temperature of seawater. Metaphytic cells of O. cf. ovata were smaller in the northern site than in the south, possibly as a result of an increase in cell division, coinciding with higher abundance, and this could be an indicator of favorable conditions. Toxicity in planktonic cells was negatively correlated with cell abundance in the water column, achieving maximum concentrations of 25pg. PLTX eqcell(-1). Copyright © 2015 Elsevier Inc. All rights reserved.

Impact of enzymatic digestion on bacterial community composition in CF airway samples

Directory of Open Access Journals (Sweden)

Kayla M. Williamson

2017-05-01

Full Text Available Background Previous studies have demonstrated the importance of DNA extraction methods for molecular detection of Staphylococcus, an important bacterial group in cystic fibrosis (CF. We sought to evaluate the effect of enzymatic digestion (EnzD prior to DNA extraction on bacterial communities identified in sputum and oropharyngeal swab (OP samples from patients with CF. Methods DNA from 81 samples (39 sputum and 42 OP collected from 63 patients with CF was extracted in duplicate with and without EnzD. Bacterial communities were determined by rRNA gene sequencing, and measures of alpha and beta diversity were calculated. Principal Coordinate Analysis (PCoA was used to assess differences at the community level and Wilcoxon Signed Rank tests were used to compare relative abundance (RA of individual genera for paired samples with and without EnzD. Results Shannon Diversity Index (alpha-diversity decreased in sputum and OP samples with the use of EnzD. Larger shifts in community composition were observed for OP samples (beta-diversity, measured by Morisita-Horn, whereas less change in communities was observed for sputum samples. The use of EnzD with OP swabs resulted in significant increase in RA for the genera Gemella (p < 0.01, Streptococcus (p < 0.01, and Rothia (p < 0.01. Staphylococcus (p < 0.01 was the only genus with a significant increase in RA from sputum, whereas the following genera decreased in RA with EnzD: Veillonella (p < 0.01, Granulicatella (p < 0.01, Prevotella (p < 0.01, and Gemella (p = 0.02. In OP samples, higher RA of Gram-positive taxa was associated with larger changes in microbial community composition. Discussion We show that the application of EnzD to CF airway samples, particularly OP swabs, results in differences in microbial communities detected by sequencing. Use of EnzD can result in large changes in bacterial community composition, and is particularly useful for detection of Staphylococcus in CF OP

Characteristics of polyethylene-moderated 252Cf neutron sources

International Nuclear Information System (INIS)

Alejnikov, V.E.; Beskrovnaya, L.G.; Florko, B.V.

2000-01-01

Polyethylene-moderated 252 Cf neutron sources were designed to produce neutron reference fields' spectra that simulate the spectra observed in the workplaces within nuclear reactors and accelerators. The paper describes the neutron sources and fields. Neutron spectra were calculated by Monte Carlo method and compared with experimental data

The Study of the Composite Material Go/CF/PTFE Tribological Property

Directory of Open Access Journals (Sweden)

Wang Li-hu

2017-01-01

Full Text Available In this paper, the composite material Go/CF/PTFE tribological property was studied. The test of its mechanical property, and the fabrication of the filled PTEE composite material sample which is based on the technology of cold press molding and sinter molding proved that adding Go and CF moderately to the composite material was an efficient way to improve its mechanical property. Meanwhile the process of friction and wear trial and SEM analysis results of the micro-structure of wear pattern proved that the addition of the Go and CF tremendously improved the anti-wear property and that after the addition the plowing effect which took place on the material surface would turn into a kind of mixed wear effect that includes plowing effect and fatigue wear. Working as pinning and bridging, the Go which distributing uniformly in the matrix was able to improve the resistance and substantially resisted the crack propagation, therefore to a certain degree enhanced the intensity of composite material and prolong its lifespan.

Decision Making about Risk of Infection by Young Adults with CF

Directory of Open Access Journals (Sweden)

Lisa Reynolds

2013-01-01

Full Text Available Young people with cystic fibrosis (CF are asked to avoid a number of environments associated with increased infection risk, but in practice they need to balance this with competing priorities such as building and sustaining relationships with friends and family. This study explored the process by which young people make these decisions. Mixed methods were used: a vignette study presenting choices around engaging in activities involving a degree of infection risk and a thematic analysis of participant's accounts of their decision making. The eight participants chose to engage in high risk behaviours in 59% of the choices. All participants chose to engage in at least one risky behavior, though this was less likely when the risk was significant. Thematic analysis revealed large areas of misunderstanding and lack of knowledge, leading to some potentially worrying misconceptions about the nature of infections and risk. Young people with CF are not currently making informed decisions around activities that involve increased risk of infection, and there is an urgent need for CF teams to address this in information provision.

Reversible pH-dependent activation/inactivation of CF(1-ATPase of spinach chloroplasts

Directory of Open Access Journals (Sweden)

A. P. Khomochkin

2017-08-01

Full Text Available The aim of the work was to study the reverse pH-dependent regulation of the enzymatic activity of the catalytic part of ATP synthase (EC 3.6.3.14 of chloroplast – coupling factor CF1. It was shown that the short-term incubation of isolated CF1 in the media with pH 4.5 or 3.5 leads to inactivation of Ca2+-ATPase, which is rapidly (t1/2 ~ 1 min restored in the medium containing 0.5-10 mM bicarbonate at pH 7.8. After acid treatment, the rate of Mg2+-ATPase reaction was also stimulated in the presence of 1 mM bicarbonate (рН 7.8; 37 °С. The increase in Ca2+– and Mg2+-АТР activity of CF1 associated with the addition of NaHCO3 solution was completely eliminated after the introduction of 50 mM acetazolamide – a specific inhibitor of carbonic anhydrase. The obtained results suggest the existence of the bound bicarbonate in the CF1 structure, which apparently participates in proton transfer.

Prevalence of the types of the petrotympanic fissure in the temporomandibular joint dysfunction

International Nuclear Information System (INIS)

Cakur, Binali; Sumbullu, Muhammed Akif; Durna, Dogan; Akgul, Hayati Murat

2011-01-01

Background Petrotympanic fissure (PTF) is a fissure in the temporal bone that runs from the temporomandibular joint (TMJ) to the tympanic cavity (TC). In PTF, the discomallear ligament (DML) connects the malleus in the tympanic cavity and the articular disc and capsule of the temporomandibular joint. PTF with the DML is a possible cause of aural symptoms related to temporomandibular joint dysfunction (TMD). Purpose To investigate the prevalence of different types of PTF in TMD using dental volumetric tomography (DVT) and determine whether PTF type correlates with age. Material and Methods DVT scans in the sagittal planes of PTFs of 134 patients with TMD were examined for the types of PTF present. Three main PTF types were described: wide, tunnel-shaped structure (type 1); tunnel-shaped structure that is wide open in the PTF entrance to the mandibular fossa and gradually thins out in the tympanic cavity (type 2), tunnel-shaped structure that is wide open in the entrance of the mandibular fossa, with a middle region with a flat-shaped tunnel structure and a narrow exit in the tympanic cavity (type 3). Results In DVT scans, PTF types 1, 2 and 3 were seen in 67.2%, 1.5%, and 31.3% of cases, respectively. We found no significant relationship between age or gender and PTF type. Conclusion The low percentage of type 2 PTF and high percentage of type 1 PTF must be taken into consideration during pre-surgical planning related to TMD. However, future well-designed clinical studies involving larger numbers of subjects will be necessary to confirm the findings of this study

Prevalence of the types of the petrotympanic fissure in the temporomandibular joint dysfunction

Energy Technology Data Exchange (ETDEWEB)

Cakur, Binali; Sumbullu, Muhammed Akif; Durna, Dogan; Akgul, Hayati Murat (Dept. of Oral Diagnosis and Oral Radiology, Faculty of Dentistry, Ataturk Univ., Erzurum (Turkey)), email: bcakur@atauni.edu.tr

2011-06-15

Background Petrotympanic fissure (PTF) is a fissure in the temporal bone that runs from the temporomandibular joint (TMJ) to the tympanic cavity (TC). In PTF, the discomallear ligament (DML) connects the malleus in the tympanic cavity and the articular disc and capsule of the temporomandibular joint. PTF with the DML is a possible cause of aural symptoms related to temporomandibular joint dysfunction (TMD). Purpose To investigate the prevalence of different types of PTF in TMD using dental volumetric tomography (DVT) and determine whether PTF type correlates with age. Material and Methods DVT scans in the sagittal planes of PTFs of 134 patients with TMD were examined for the types of PTF present. Three main PTF types were described: wide, tunnel-shaped structure (type 1); tunnel-shaped structure that is wide open in the PTF entrance to the mandibular fossa and gradually thins out in the tympanic cavity (type 2), tunnel-shaped structure that is wide open in the entrance of the mandibular fossa, with a middle region with a flat-shaped tunnel structure and a narrow exit in the tympanic cavity (type 3). Results In DVT scans, PTF types 1, 2 and 3 were seen in 67.2%, 1.5%, and 31.3% of cases, respectively. We found no significant relationship between age or gender and PTF type. Conclusion The low percentage of type 2 PTF and high percentage of type 1 PTF must be taken into consideration during pre-surgical planning related to TMD. However, future well-designed clinical studies involving larger numbers of subjects will be necessary to confirm the findings of this study

Clinical and manometric evaluation of women with chronic anal fissure before and after internal subcutaneous lateral sphincterotomy

Directory of Open Access Journals (Sweden)

Silvana Marques e Silva

2012-06-01

Full Text Available OBJECTIVE: To evaluate clinical and manometric parameters of chronic anal fissure females undergoing lateral internal sphincterotomy (LIS. METHODS: A total of eight women with chronic anal fissure who underwent LIS were included in this study. The preoperative assessment was performed one week before surgery and included general and anorectal examination, anorectal manometry, and Jorge Wexner questionnaire. The post operative follow up was made every 15 days until complete healing. Jorge Wexner questionnaires and anorectal manometry were repeated at 1 month and 3 months after the surgery. Time to healing, manometric changes and complications were assessed. RESULTS: All patients had preoperative increased anal resting pressure. The resting pressures and anal canal length were significantly decreased 3 months after surgery. Patients' complaints of itching and bleeding were also reduced. Fissures healed in 7 patients and median healing time was 45 days. No complications were observed due to the procedure. One patient had transient incontinence to flatus. CONCLUSION: Lateral internal sphincterotomy provided clinical improvement and reduced resting pressure of the internal anal sphincter in women with chronic anal fissure.OBJETIVO: Avaliar a evolução clínica e manométrica de mulheres com fissura anal crônica submetidas à esfincterotomia lateral interna subcutânea. MÉTODOS: Estudo prospectivo com oito pacientes. A avaliação inicial foi realizada por meio de questionários, exame físico e manometria anorretal na semana anterior ao procedimento cirúrgico. Durante o período pós-operatório, as pacientes foram avaliadas clinicamente a cada 15 dias, até a cicatrização completa. Os questionários e a manometria anorretal foram repetidos 1 mês e 3 meses após a operação. Foi avaliado o tempo para cicatrização da fissura, as alterações manométricas e as complicações decorrentes do procedimento. RESULTADOS: Todas as pacientes

Feeding response of Daphnia cf. similis to different concentration ...

African Journals Online (AJOL)

Bheema

Experiments showing that Daphnia can suppress cyanobacteria in eutrophic lakes have been limited to cases ... Experimental Design, Sampling Method and Analysis ..... It may be also true in case of this study because high mortality of D. cf.

Ab initio full-potential study of mechanical properties and magnetic phase stability of californium monopnictides (CfN and CfP)

Energy Technology Data Exchange (ETDEWEB)

Amari, S., E-mail: siham_amari@yahoo.fr [Faculté des Sciences de la Nature et de la Vie, Université Hassiba Benbouali, Chlef, 02000 (Algeria); Bouhafs, B. [Laboratoire de Modélisation et Simulation en Sciences des Matériaux, Université Djillali Liabès de Sidi Bel-Abbés, Sidi Bel-Abbés, 22000 (Algeria)

2016-09-15

Based on the first-principles methods, the structural, elastic, electronic, properties and magnetic ordering of californium monopnictides CfX (X = P) have been studied using the full-potential augmented plane wave plus local orbitals (FP-L/APW + lo) method within the framework of density functional theory (DFT). The electronic exchange correlation energy is described by generalized gradient approximation GGA and GGA+U (U is the Hubbard correction). The GGA+U method is applied to the rare-earth 5f states. We have calculated the lattice parameters, bulk modulii and the first pressure derivatives of the bulk modulii. The elastic properties of the studied compounds are only investigated in the most stable calculated phase. In order to gain further information, we have calculated Young’s modulus, shear modulus, anisotropy factor and Kleinman parameter by the aid of the calculated elastic constants. The results mainly show that californium monopnictides CfX (X = P) have an antiferromagnetic spin ordering. Density of states (DOS) and charge densities for both compounds are also computed in the NaCl (B1) structure.

Applying psychological theories to evidence-based clinical practice: identifying factors predictive of placing preventive fissure sealants

Directory of Open Access Journals (Sweden)

Maclennan Graeme

2010-04-01

Full Text Available Abstract Background Psychological models are used to understand and predict behaviour in a wide range of settings, but have not been consistently applied to health professional behaviours, and the contribution of differing theories is not clear. This study explored the usefulness of a range of models to predict an evidence-based behaviour -- the placing of fissure sealants. Methods Measures were collected by postal questionnaire from a random sample of general dental practitioners (GDPs in Scotland. Outcomes were behavioural simulation (scenario decision-making, and behavioural intention. Predictor variables were from the Theory of Planned Behaviour (TPB, Social Cognitive Theory (SCT, Common Sense Self-regulation Model (CS-SRM, Operant Learning Theory (OLT, Implementation Intention (II, Stage Model, and knowledge (a non-theoretical construct. Multiple regression analysis was used to examine the predictive value of each theoretical model individually. Significant constructs from all theories were then entered into a 'cross theory' stepwise regression analysis to investigate their combined predictive value Results Behavioural simulation - theory level variance explained was: TPB 31%; SCT 29%; II 7%; OLT 30%. Neither CS-SRM nor stage explained significant variance. In the cross theory analysis, habit (OLT, timeline acute (CS-SRM, and outcome expectancy (SCT entered the equation, together explaining 38% of the variance. Behavioural intention - theory level variance explained was: TPB 30%; SCT 24%; OLT 58%, CS-SRM 27%. GDPs in the action stage had significantly higher intention to place fissure sealants. In the cross theory analysis, habit (OLT and attitude (TPB entered the equation, together explaining 68% of the variance in intention. Summary The study provides evidence that psychological models can be useful in understanding and predicting clinical behaviour. Taking a theory-based approach enables the creation of a replicable methodology for

Treatment of dry eye syndrome with orally administered CF101: data from a phase 2 clinical trial.

Science.gov (United States)

Avni, Isaac; Garzozi, Hanna J; Barequet, Irina S; Segev, Fanni; Varssano, David; Sartani, Gil; Chetrit, Noa; Bakshi, Erez; Zadok, David; Tomkins, Oren; Litvin, Gilad; Jacobson, Kenneth A; Fishman, Sari; Harpaz, Zivit; Farbstein, Motti; Yehuda, Sara Bar; Silverman, Michael H; Kerns, William D; Bristol, David R; Cohn, Ilan; Fishman, Pnina

2010-07-01

To explore the safety and efficacy of CF101, an A(3) adenosine receptor agonist, in patients with moderate to severe dry eye syndrome. Phase 2, multicenter, randomized, double-masked, placebo-controlled, parallel-group study. Sixty-eight patients completed the study, 35 patients in the placebo group and 33 patients in the CF101 group. Patients were treated orally with either 1 mg CF101 pills or matching vehicle-filled placebo pills, given twice daily for 12 weeks, followed by a 2-week posttreatment observation. An improvement of more than 25% over baseline at week 12 in one of the following parameters: (1) tear break-up time (BUT); (2) superficial punctate keratitis assessed by fluorescein staining results; and (3) Schirmer tear test 1 results. Clinical laboratory safety tests, ophthalmic examinations, intraocular pressure (IOP) measurements, electrocardiographic evaluations, vital sign measurements, and monitoring of adverse events. A statistically significant increase in the proportion of patients who achieved more than 25% improvement in the corneal staining and in the clearance of corneal staining was noted between the CF101-treated group and the placebo group. Treatment with CF101 resulted in a statistically significant improvement in the mean change from baseline at week 12 of the corneal staining, BUT, and tear meniscus (TM) height in the CF101-treated group. CF101 was well tolerated and exhibited an excellent safety profile with no serious adverse events. A statistically significant decrease from baseline was observed in the IOP of the CF101-treated group in comparison with the placebo group. CF101, given orally, induced a statistically significant improvement in the corneal staining and an improvement in the BUT and TM in patients with moderate to severe dry eye syndrome. The drug was very well tolerated. These data and the anti-inflammatory characteristic of CF101 support further study of the drug as a potential treatment for the signs and symptoms of dry

Investigations on the Manufacturing and Mechanical Properties of Spun Yarns Made from Staple CF for Thermoset Composites

Directory of Open Access Journals (Sweden)

Hasan Mir Mohammad Badrul

2017-12-01

Full Text Available This article reports the results of investigations carried out to produce yarns consisting of staple carbon fiber (CF obtained from process waste for the manufacturing of composites suitable especially for thermoset applications. For this purpose, a comparative analysis is done on processability between 100% staple CF and 60 weight% staple CF mixed with 40 weight% PVA fibers in carding, drawing and spinning process. The hybrid yarns are produced by varying twist level. The PVA fibers of the hybrid yarn are then dissolved using hot water treatment. The mechanical properties of yarns consisting of 100% staple CF and hybrid yarns consisting of staple CF and PVA before and after hot water treatment are investigated. Furthermore, test specimen is also prepared by impregnating 100% staple CF yarn and the hybrid yarns (after the dissolving of PVA with epoxy resin. The results of the tensile test of the yarns in consolidated state reveals that the hybrid yarn produced with 80 T/m after hot water treatment exhibits approximately 75% of the tensile strength of virgin filament tow, and it is expected that the hybrid yarns can be applied for the manufacturing of thermoset based composites for load bearing structures.

A study of the valence shell photoelectron and photoabsorption spectra of CF3SF5

International Nuclear Information System (INIS)

Holland, D M P; Shaw, D A; Walker, I C; McEwen, I J; Apra, E; Guest, M F

2005-01-01

The outer valence shell photoelectron spectrum of CF 3 SF 5 has been studied experimentally and theoretically. Synchrotron radiation has been used to record angle-resolved outer valence shell photoelectron spectra of CF 3 SF 5 in the photon energy range 18-60 eV. These spectra have allowed photoelectron asymmetry parameters and branching ratios to be derived. The Outer Valence Green's Function approach has been employed to calculate the molecular orbital configuration and associated binding energies. A charge distribution analysis has also been obtained. Assignments have been proposed for the peaks observed in the photoelectron spectrum. The absolute photoabsorption cross section of CF 3 SF 5 has been measured from threshold to 40 eV, and strongly resembles that of SF 6 . Assignments, involving intravalence transitions, have been proposed for some of the principal features appearing in the photoabsorption spectrum of CF 3 SF 5

The Degradation Behavior of SiCf/SiO2 Composites in High-Temperature Environment

Science.gov (United States)

Yang, Xiang; Cao, Feng; Qing, Wang; Peng, Zhi-hang; Wang, Yi

2018-04-01

SiCf/SiO2 composites had been fabricated efficiently by Sol-Gel method. The oxidation behavior, thermal shock property and ablation behavior of SiCf/SiO2 composites was investigated. SiCf/SiO2 composites showed higher oxidation resistance in oxidation atmosphere, the flexural strength retention ratio was larger than 90.00%. After 1300 °C thermal shock, the mass retention ratio was 97.00%, and the flexural strength retention ratio was 92.60%, while after 1500 °C thermal shock, the mass retention ratio was 95.37%, and the flexural strength retention ratio was 83.34%. After 15 s ablation, the mass loss rate was 0.049 g/s and recession loss rate was 0.067 mm/s. The SiO2 matrix was melted in priority and becomes loosen and porous. With the ablation going on, the oxides were washed away by the shearing action of the oxyacetylene flame. The evaporation of SiO2 took away large amount of heat, which is also beneficial to the protection for SiCf/SiO2 composites.

NAA using Cf-252 after preconcentration

International Nuclear Information System (INIS)

Panyo, O.; Moebius, S.; Keller, C.

1988-01-01

Neutron activation analysis (NAA) with thermal neutron using Cf-252 sources was applied to elemental analysis of elements in water samples. A high-resolution Ge(Li) detector was employed for gamma-radiation detection. Both suspended particulate matter and liquid fraction were investigated after filtration. Preconcentration method by co-precipitation using iron (III) hydroxide and oxine were chosen for use. Elements which were considered to be able to detect in the present study are Al, As, Cl, K, Mg, Mn, Na, Sr, Ti, U, V and Zn

A Comparative Evaluation of the Effect of Bonding Agent on the Tensile Bond Strength of Two Pit and Fissure Sealants Using Invasive and Non-invasive Techniques: An in-vitro Study.

Science.gov (United States)

Singh, Shamsher; Adlakha, Vivek; Babaji, Prashant; Chandna, Preetika; Thomas, Abi M; Chopra, Saroj

2013-10-01

Newer technologies and the development of pit and fissure sealants have shifted the treatment philosophy from 'drill and fill' to that of 'seal and heal'. The purpose of this in-vitro study was to evaluate the effects of bonding agents on the tensile bond strengths of two pit and fissure sealants by using invasive and non-invasive techniques. One hundred and twenty bicuspids were collected and teeth were divided into two groups: Group-I (Clinpro) and Group-II (Conseal f) with 60 teeth in each group. For evaluating tensile bond strengths, occlusal surfaces of all the teeth were flattened by reducing buccal and lingual cusps without disturbing fissures. Standardised polyvinyl tube was bonded to occlusal surfaces with respective materials. Sealants were applied, with or without bonding agents, in increments and they were light cured. Tensile bond strengths were determined by using Universal Testing Machine. Data were then statistically analysed by using Student t-test for comparison. A statistically significant difference was found in tensile bond strength in invasive with bonding agent group than in non-invasive with bonding agent group. This study revealed that invasive techniques increase the tensile bond strengths of sealants as compared to non- invasive techniques and that the use of a bonding agent as an intermediate layer between the tooth and fissure sealant is beneficial for increasing the bond strength.

RBE of Cf-252 neutrons as determined by its lethal, mutagenic, and cytogenetic effects on human cells

International Nuclear Information System (INIS)

Ban, Sadayuki

1989-01-01

To assess the biological effects of neutrons, a man-made spontaneously fissioning isotope, Cf-252, is useful as an experimental model to obtain basic biological data on mixed radiation of gamma-rays and neutrons. The paper describes the lethal effect of Cf-252 radiation on human skin fibroblasts, its lethal and mutagenic effect on HeLa MR cells, and the micronuclei inducing effect on human peripheral lymphocytes. Dose-survival responses of three fibroblast cell strains exposed to Cf-252 radiation are measured. Individual difference is larger than the experimental fluctuation. D 10 values of each strain are obtained from the linear model and linear-quadratic model. Though the dose rate of X-ray is higher than that of Cf-252 radiations, the mean value of RBE(n+γ) is simply obtained as 1.86+0.31 (RBE:relative biological effectiveness). RBE(n) of Cf-252 neutrons to high-dose-rate X-rays is 2.29. After X-ray irradiation, the survival curve of HeLa MR cells gives an extrapolation number of 3.6. It is 1.3 after Cf-252 irradiation. At 50% survival, RBE(n+γ) and RBE(n) are 2.05 and 2.6, respectively. At 10% survival they are 2.05 and 2.6. The mutation frequencies after X-ray irradiation showed a significant non-linear increase with dose. Those after Cf-252 irradiation increase linearly with dose. (N.K.)

Shielding experiments in different materials with 252Cf neutron spectra

International Nuclear Information System (INIS)

Sathian, Deepa; Marathe, P.K.; Pal, Rupali; Jayalakshmi, V.; Chourasiya, G.; Mayya, Y.S.

2008-01-01

Adequate shielding for neutron sources can be determined using analytical method or by actually measuring the attenuation for the target configuration. This paper describes the measurement of Half Value Thickness (HVT), Tenth Value Thickness (TVT), Σ values for four different shielding materials, using a standard 252 Cf neutron source and comparing with the values calculated using an empirical relationship. BF 3 based REM-counter is used for measurement of neutron dose equivalent, against different thickness of the shielding material. The experimental HVT and S values are in good agreement with the calculated values. From this study, it is concluded that, among the four materials studied, high density polyethylene (HDPE) is best suitable for the shielding of a 252 Cf neutron source. (author)

Decorporation of 241Am and 252Cf by Ca-DTPA from rat, Syrian and Chinese hamster

International Nuclear Information System (INIS)

Seidel, A.

1977-01-01

Retention and mobilization by Ca-DTPA of 241 Am and 252 Cf from rats, Syrian and Chinese hamsters are compared. Previous observations of a much longer residence time of actinides in hamsters liver than in rat liver are confirmed. Identical dose-effect functions were obtained for skeleton of rats and Syrian hamsters whereas 252 Cf removal from Chinese hamster skeleton was lower. The mobilization of 241 Am was lower than that of 252 Cf. With regard to species differences, qualitatively similar results were obtained for 241 Am as for 252 Cf. The results will be discussed with regard to the reduction by DTPA treatment of radiation risk in animal species with different biological half times of actinides in their livers. In this connection, attention will be paid to the usefulness of long-term DTPA treatment

Suppression of interfacial reaction for HfO2 on silicon by pre-CF4 plasma treatment

International Nuclear Information System (INIS)

Lai, C.S.; Wu, W.C.; Chao, T.S.; Chen, J.H.; Wang, J.C.; Tay, L.-L.; Rowell, Nelson

2006-01-01

In this letter, the effects of pre-CF 4 plasma treatment on Si for sputtered HfO 2 gate dielectrics are investigated. The significant fluorine was incorporated at the HfO 2 /Si substrate interface for a sample with the CF 4 plasma pretreatment. The Hf silicide was suppressed and Hf-F bonding was observed for the CF 4 plasma pretreated sample. Compared with the as-deposited sample, the effective oxide thickness was much reduced for the pre-CF 4 plasma treated sample due to the elimination of the interfacial layer between HfO 2 and Si substrate. These improved characteristics of the HfO 2 gate dielectrics can be explained in terms of the fluorine atoms blocking oxygen diffusion through the HfO 2 film into the Si substrate

CF60 Concrete Composition Design and Application on Fudiankou Xijiang Super Large Bridge

Science.gov (United States)

Qiu, Yi Mei; Wen, Sen Yuan; Chen, Jun Xiang

2018-06-01

Guangxi Wuzhou City Ring Road Fudiankou Xijiang super large bridge CF60 concrete is a new multi-phase composite high-performance concrete, this paper for the Fudiankou Xijiang bridge structure and characteristics of the project, in accordance with the principle of local materials and technical specification requirements, combined with the site conditions of CF60 engineering high performance concrete component materials, proportion and the technical performance, quantify the main physical and mechanical performance index. Analysis main influencing factors of the technical indicators, reasonable adjustment of concrete mix design parameters, and the use of technical means of admixture and multi-function composite admixture of concrete, obtain the optimal proportion of good work, process, mechanical properties stability and durability of engineering properties, recommend and verification of concrete mix; to explore the CF60 high performance concrete Soil in the Fudiankou Xijiang bridge application technology, detection and tracking the quality of concrete construction, concrete structure during the construction of the key technology and control points is proposed, evaluation of CF60 high performance concrete in the actual engineering application effect and benefit to ensure engineering quality of bridge structure and service life, and super long span bridge engineering construction to provide basis and reference.

Familial concordance of phenotype and microbial variation among siblings with CF.

Science.gov (United States)

Picard, Elie; Aviram, Micha; Yahav, Yaakov; Rivlin, Joseph; Blau, Hanna; Bentur, Lea; Avital, Avraham; Villa, Yael; Schwartz, Shepard; Kerem, Batsheva; Kerem, Eitan

2004-10-01

The clinical spectrum of cystic fibrosis (CF) is influenced by the cystic fibrosis transmembrane conductance regulator (CFTR) genotype. However, variable courses of the disease were demonstrated among patients with identical genotypes. Since siblings share identical CFTR mutations and environmental factors, they can serve as a model to assess the effect of modifier genes on disease expression, and also to evaluate cross-infection. The aim of this study was to compare disease expression among siblings with CF. All sibling pairs treated at 7 CF centers in Israel were included in the study. Data were collected from patients' medical charts. Fifty families with at least 2 siblings were identified. As expected, the second-born sibling was diagnosed at an earlier age compared to the first-born. The mode of CF presentation at diagnosis showed significant familial concordance. In the families where the first sibling presented with gastrointestinal manifestations, 79% of the second siblings also presented with gastrointestinal manifestations. When gastrointestinal manifestations were absent in the first sibling, only 12% of the second siblings presented with gastrointestinal manifestations (P sibling presented with respiratory symptoms, 60% of the second siblings presented with the similar symptoms. However, when the first sibling presented without respiratory symptoms, only 12% of the second siblings presented with respiratory symptoms (P sibling had MI, 8 (80%) of the subsequent siblings had MI. On the other hand, in the 39 families where the first-born sibling did not have MI, only 2 (5%) subsequent siblings had MI (P siblings. P. aeruginosa grew from sputum in 89% of our study patients. When P. aeruginosa was isolated from the first-born patient, 91% of the second siblings were also positive for P. aeruginosa, whereas when the initial sibling was not a carrier of P. aeruginosa, only 50% of subsequent siblings were positive (P sibling than in the first for the two

Neutron emission during acceleration of 252Cf fission fragments

International Nuclear Information System (INIS)

Batenkov, O.I.; Blinov, M.V.; Blinov, A.B.; Smirnov, S.N.

1991-01-01

We investigate neutron emission during acceleration of fission fragments in the process of spontaneous fission of 252 Cf. Experimental angular and energy distributions of neutrons are compared with the results of calculations of neutron evaporation during fragment acceleration. (author). 8 refs, 3 figs

Energy and angular distributions of neutrons from 252Cf spontaneous fission

International Nuclear Information System (INIS)

Vasil'ev, Yu.A.; Sidorov, L.V.; Vasil'eva, N.K.

1982-01-01

Some results from a first series of measurements of energy and angular distributions of neutrons from 252 Cf spontaneous fission using a spectrometer with high neutron detection efficiency, i.e. a 4π neutron time-of-flight spectrometer, were already presented. Subsequently, a second series of measurements was performed using a more sophisticated technique. For this second series, we used a more intense 252 Cf layer (25,000 spontaneous fissions per second). The angular resolution was improved by a factor of 2-3 by combining the hexahedral counter modules, placed at the same angle with respect to the direction of motion of the fragments, in new panoramic counters. The neutron counters were calibrated against the average 252 Cf neutron spectrum at several positions of the axis of the fragment detector with respect to the neutron counters. In the spectrum measurements and calibration work, the scattered neutron background was not determined theoretically, as in the first series of measurements, but experimentally using four extra scintillation counters with scatter cones; the counters were set up at 60 deg., 80 deg., 100 deg., and 120 deg. to the direction of separation of the fragments

Time domain measurements for fast metal assemblies with /sup 252/Cf

Energy Technology Data Exchange (ETDEWEB)

Mihalczo, J T

1975-06-01

Time correlation measurements between the pulses from an ionization counter containing a /sup 252/Cf neutron source, which provided the initiators of fission chains in a neutron multiplying assembly and from sensors that detected particles from the fission chains are reviewed for fast uranium or plutonium metal assemblies. Comparisons are made between the correlated count rate from a /sup 252/Cf measurement and that from both one and two-detector Rossi-..cap alpha.. measurements. The assemblies studied were (1) unmoderated and polyethylene-moderated uranium (93 wt percent /sup 235/U) cylinders with masses from 12 to 160 kg; prompt neutron decay constants from 3 to 10/sup 3/ to 10/sup 8/ sec/sup -1/ and (2) unmoderated plutonium spheres and parts of spheres with plutonium masses from 2.2 to 16 kg with /sup 240/Pu contents of 4.5 to 20.1 at. percent. Measurements with a delayed critical uranium metal sphere determined the effective delayed neutron fraction and served as the basis for verification of the theory of the /sup 252/Cf measurement method in the time domain within a few per cent. (auth)

Critical parameters and saturated density of trifluoroiodomethane (CF{sub 3}I)

Energy Technology Data Exchange (ETDEWEB)

Duan, Y.Y.; Shi, L.; Zhu, M.S.; Han, L.Z. [Tsinghua Univ., Beijing (China). Dept. of Thermal Engineering

1999-05-01

The vapor-liquid coexistence curve of trifluoroiodomethane (CF{sub 3}I) was measured by visual observation of the meniscus disappearance in an optical cell. Thirty-two saturated density data points were obtained along the vapor-liquid coexistence curve between 384.5 and 2024.9 kg/m{sup 3} in the temperature range from 301.02 K to the critical temperature. The experimental uncertainties in temperature and density were estimated to be within {+-}10 mK and {+-}0.5%, respectively. Measurements near the critical point were used to determine the critical temperature T{sub c} = 396.44 {+-} 0.01 K and the critical density {rho}{sub c} = 868 {+-} 3 kg/m{sup 3} for trifluoroiodomethane (CF{sub 3}I) on the basis of the meniscus disappearing level as well as the intensity of the critical opalescence. The critical pressure {rho}{sub c} = 3.953 {+-} 0.005 MPa was extrapolated from the existing vapor pressure equation proposed previously using the present {Tc} value. The critical exponent, {beta}, was also determined, and correlations of the saturated liquid and saturated vapor densities of CF{sub 3}I were developed.

Detection of occlusal caries with impedance spectroscopy and laser fluorescence before and after placement of fissure sealants: An in vitro study

DEFF Research Database (Denmark)

Mortensen, Diana; Ekstrand, Kim; Twetman, Svante

2016-01-01

, the DIAGNOdent pen and ICDAS at baseline, after bleaching, etching and placement of a clear fissure sealant. A digital radiograph was exposed at baseline. After the assessments, the actual lesion depth was histologically determined.  Results : Bleaching did not affect the readings but significantly higher ACIS...

Implementation of 252Cf-source-driven power spectrum density measurement system

International Nuclear Information System (INIS)

Ren Yong; Wei Biao; Feng Peng; Li Jiansheng; Ye Cenming

2012-01-01

The principle of 252 Cf-source-driven power spectrum density measurement method is introduced. A measurement system and platform is realized accordingly, which is a combination of hardware and software, for measuring nuclear parameters. The detection method of neutron pulses based on an ultra-high-speed data acquisition card (three channels, 1 GHz sampling rate, 1 ns synchronization) is described, and the data processing process and the power spectrum density algorithm on PC are designed. This 252 Cf-source-driven power spectrum density measurement system can effectively obtain the nuclear tag parameters of nuclear random processes, such as correlation function and power spectrum density. (authors)

Cascade filtration (CF) with the Haemonetics MCS+: a new technical adaptation.

Science.gov (United States)

Valbonesi, M; Bo, A; De Luigi, M C; Bruni, R; Stura, P; Sanfilippo, B; Varinelli, I

2001-03-01

CF was introduced in clinical medicine in 1980. Up to now, exclusively two-vein procedures have been carried out with some limitations to expansion of this technique. In this report we describe the very first application of single-needle CF carried out with Haemonetics MCS + apparatus. Twenty procedures were completed without any untoward effect in patients suffering from TTP, post-hepatitic cryoblobulinemia, familial hypercholesterolemia and acute Guillan-Barrè Syndrome. From 1 to 4 sessions were carried out per patient with the expected laboratory and clinical results. The only limit is the procedure time that averages 231 +/- 48 min., approximately 40% longer than two needle procedures.

MoO3 trapping layers with CF4 plasma treatment in flash memory applications

International Nuclear Information System (INIS)

Kao, Chuyan Haur; Chen, Hsiang; Chen, Su-Zhien; Chen, Chian Yu; Lo, Kuang-Yu; Lin, Chun Han

2014-01-01

Highlights: • MoO 3 -based flash memories have been fabricated. • CF4 plasma treatment could enhance good memory performance. • Material analyses confirm that plasma treatment eliminated defects. • Fluorine atoms might fix the dangling bonds. - Abstract: In this research, we used MoO 3 with CF 4 plasma treatment as charge trapping layer in metal-oxide-high-k -oxide-Si-type memory. We analyzed material properties and electrical characteristics with multiple analyses. The plasma treatment could increase the trapping density, reduce the leakage current, expand band gap, and passivate the defect to enhance the memory performance. The MoO 3 charge trapping layer memory with suitable CF 4 plasma treatment is promising for future nonvolatile memory applications

Serum insulin-like growth factor-1 (IGF-1) during CF pulmonary exacerbation: trends and biomarker correlations.

Science.gov (United States)

Gifford, A H; Nymon, A B; Ashare, A

2014-04-01

Cystic fibrosis (CF) is characterized by low circulating levels of insulin-like growth factor-1 (IGF-1), a hormone produced by the liver that governs anabolism and influences immune cell function. Because treatment of CF pulmonary exacerbation (CFPE) often improves body weight and lung function, we questioned whether serum IGF-1 trends were emblematic of these responses. Initially, we compared serum levels between healthy adults with CF and controls of similar age. We then measured serum IGF-1 throughout the CFPE cycle. We also investigated correlations among IGF-1 and other serum biomarkers during CFPE. Anthopometric, spirometric, and demographic data were collected. Serum IGF-1 concentrations were measured by ELISA. CF subjects in their usual state of health had lower serum IGF-1 levels than controls. Serum IGF-1 concentrations fell significantly from baseline at the beginning of CFPE. Treatment with intravenous antibiotics was associated with significant improvement in serum IGF-1 levels, body mass index (BMI), and percent-predicted forced expiratory volume in 1 sec (FEV1 %). At early and late CFPE, serum IGF-1 was directly correlated with FEV1 %, serum iron, hemoglobin concentration, and transferrin saturation (TSAT) and indirectly correlated with alpha-1-antitrypsin. This study not only supports the paradigm that CF is characterized by IGF-1 deficiency but also that trends in lung function, nutritional status, and serum IGF-1 are related. Improvements in all three parameters after antibiotics for CFPE likely highlight the connection between lung function and nutritional status in CF. Close correlations among IGF-1 and iron-related hematologic parameters suggest that IGF-1 may participate in CF iron homeostasis, another process that is known to be influenced by CFPE. © 2013 Wiley Periodicals, Inc.

Isosorbide dinitrate ointment vs botulinum toxin A (Dysport®) as the primary treatment for chronic anal fissure: a randomized multicentre study

NARCIS (Netherlands)

Berkel, A.E.M.; Rosman, C.; Koop, R.; van Duijvendijk, P.; van der Palen, Jacobus Adrianus Maria; Klaase, J.M.

2014-01-01

Aim Nitric oxide donors, such as isosorbide dinitrate ointment (ISDN), are considered as first-choice agents in the treatment of chronic anal fissure. Injection with botulinum toxin A in the internal anal sphincter is often used as a second-line therapy, although it may give better results and fewer

Novel Mutations Detected in Avirulence Genes Overcoming Tomato Cf Resistance Genes in Isolates of a Japanese Population of Cladosporium fulvum.

Directory of Open Access Journals (Sweden)

Yuichiro Iida

Full Text Available Leaf mold of tomato is caused by the biotrophic fungus Cladosporium fulvum which complies with the gene-for-gene system. The disease was first reported in Japan in the 1920s and has since been frequently observed. Initially only race 0 isolates were reported, but since the consecutive introduction of resistance genes Cf-2, Cf-4, Cf-5 and Cf-9 new races have evolved. Here we first determined the virulence spectrum of 133 C. fulvum isolates collected from 22 prefectures in Japan, and subsequently sequenced the avirulence (Avr genes Avr2, Avr4, Avr4E, Avr5 and Avr9 to determine the molecular basis of overcoming Cf genes. Twelve races of C. fulvum with a different virulence spectrum were identified, of which races 9, 2.9, 4.9, 4.5.9 and 4.9.11 occur only in Japan. The Avr genes in many of these races contain unique mutations not observed in races identified elsewhere in the world including (i frameshift mutations and (ii transposon insertions in Avr2, (iii point mutations in Avr4 and Avr4E, and (iv deletions of Avr4E, Avr5 and Avr9. New races have developed by selection pressure imposed by consecutive introductions of Cf-2, Cf-4, Cf-5 and Cf-9 genes in commercially grown tomato cultivars. Our study shows that molecular variations to adapt to different Cf genes in an isolated C. fulvum population in Japan are novel but overall follow similar patterns as those observed in populations from other parts of the world. Implications for breeding of more durable C. fulvum resistant varieties are discussed.

The CF-CIRC study: a French collaborative study to assess the accuracy of Cystic Fibrosis diagnosis in neonatal screening

Directory of Open Access Journals (Sweden)

Bellon Gabriel

2006-10-01

Full Text Available Abstract Background Cystic fibrosis (CF is caused by mutations in the gene encoding for the CF transmembrane conductance regulator (CFTR protein, which acts as a chloride channel after activation by cyclic AMP (cAMP. Newborn screening programs for CF usually consist of an immunoreactive trypsinogen (IRT assay, followed when IRT is elevated by testing for a panel of CF-causing mutations. Some children, however, may have persistent hypertrypsinogenemia, only one or no identified CFTR gene mutation, and sweat chloride concentrations close to normal values. In vivo demonstration of abnormal CFTR protein function would be an important diagnostic aid in this situation. Measurements of transepithelial nasal potential differences (NPD in adults accurately characterize CFTR-related ion transport. The aim of the present study is to establish reference values for NPD measurements for healthy children and those with CF aged 3 months to 3 years, the age range of most difficult-to-diagnose patients with suspected CF. The ultimate goal of our study is to validate NPD testing as a diagnostic tool for children with borderline results in neonatal screening. Methods/Design We adapted the standard NPD protocol for young children, designed a special catheter for them, used a slower perfusion rate, and shortened the protocol to include only measurement of basal PD, transepithelial sodium (Na+ transport in response to the Na+ channel inhibitor amiloride, and CFTR-mediated chloride (Cl- secretion in response to isoproterenol, a β-agonist in a Cl- free solution. The study will include 20 children with CF and 20 healthy control children. CF children will be included only if they carry 2 CF-causing mutations in the CFTR gene or have sweat chloride concentrations > 60 mEq/L or both. The healthy children will be recruited among the siblings of the CF patients, after verification that they do not carry the familial mutation. Discussion A preliminary study of 3 adult control

A survey of uses and users of 252Cf

International Nuclear Information System (INIS)

Bigelow, J.E.; Alexander, C.W.; King, L.J.; Knauer, J.B.; Notz, K.J.

1989-01-01

Californium-252, which is one of the transuranium-element isotopes being produced in the Radiochemical Engineering Development Center (REDC) at Oak Ridge National Laboratory (ORNL), has found many applications in service to industry and medicine. As a neutron source, 252 Cf is unique in providing a highly concentrated and extremely reliable neutron spectrum from a very small assembly. Over the past 22 years, 252 Cf has been applied with great success to cancer therapy, to neutron radiography of objects ranging from flowers to entire aircraft, to startup sources for nuclear reactors, to fission activation assay for quality control and safeguards of all commercial nuclear fuel, and to many other beneficial uses, some of which are now poised for further growth. The extensive exploitation of this highly specialized product has been made possible through 252 Sales/Loan programs sponsored by the US DOE Office of Nuclear Materials Production, initially at the Savannah River Laboratory and now at ORNL

Caregiver burden and vocational participation among parents of adolescents with CF.

Science.gov (United States)

Neri, Luca; Lucidi, Vincenzina; Catastini, Paola; Colombo, Carla

2016-03-01

Cystic fibrosis (CF) require parents to make significant lifestyle changes to accommodate their children's treatments. We examined the impact of CF-related caregiving on parents' occupational adjustment and labor supply in terms of organizational changes, presenteeism, and absenteeism. Nineteen Italian CF referral centers joined the LINFA group. We enrolled 168 adolescents with the disease and their parents (n = 225) in a cross-sectional survey research. Patients and their parents answered a self-administered questionnaire (child: SF-12, satisfaction with life, MRC Dyspnea scale; parent: caregiver burden scale, short depression-happiness scale, self-rated health, socio-demographic factors). A pediatrician recorded clinical information (pulmonary exacerbations, CF-related complications, treatment, BMI percentile, Fev1 %). Patients mean age was 16 ± 2.6 and mean BMI percentile was 42.1 ± 29.1; 92 patients (55%) had FEV1 % > 80. Mean parents' age was 45.9 ± 5.9 years, and 59% were women; 75% of women and 24% of men reported to be the primary caregiver. Only 12% had a graduate or post-graduate degree and 56.4% were employed. Approximately 34% of parents reported short depression-happiness scale scores suggestive of clinical depression. Higher caregiving strain was associated with increased likelihood of changing job, work shift schedule, or giving up career opportunities in order to fulfill their caregiving role and increased productivity losses due to family leaves and presenteeism. Caregiving burden is a relevant and frequent issue among parents of adolescent patients with cystic fibrosis. We showed that the humanistic and vocational impact of caring for young patients with the disease is striking and demands health-care and welfare supportive actions. © 2015 Wiley Periodicals, Inc.

High-resolution CT of nontuberculous mycobacterium infection in adult CF patients: diagnostic accuracy

International Nuclear Information System (INIS)

McEvoy, Sinead; Lavelle, Lisa; Kilcoyne, Aoife; McCarthy, Colin; Dodd, Jonathan D.; DeJong, Pim A.; Loeve, Martine; Tiddens, Harm A.W.M.; McKone, Edward; Gallagher, Charles G.

2012-01-01

To determine the diagnostic accuracy of high-resolution computed tomography (HRCT) for the detection of nontuberculous mycobacterium infection (NTM) in adult cystic fibrosis (CF) patients. Twenty-seven CF patients with sputum-culture-proven NTM (NTM+) underwent HRCT. An age, gender and spirometrically matched group of 27 CF patients without NTM (NTM-) was included as controls. Images were randomly and blindly analysed by two readers in consensus and scored using a modified Bhalla scoring system. Significant differences were seen between NTM (+) and NTM (-) patients in the severity of the bronchiectasis subscore [45 % (1.8/4) vs. 35 % (1.4/4), P = 0.029], collapse/consolidation subscore [33 % (1.3/3) vs. 15 % (0.6/3)], tree-in-bud/centrilobular nodules subscore [43 % (1.7/3) vs. 25 % (1.0/3), P = 0.002] and the total CT score [56 % (18.4/33) vs. 46 % (15.2/33), P = 0.002]. Binary logistic regression revealed BMI, peribronchial thickening, collapse/consolidation and tree-in-bud/centrilobular nodules to be predictors of NTM status (R 2 = 0.43). Receiver-operator curve analysis of the regression model showed an area under the curve of 0.89, P < 0.0001. In adults with CF, seven or more bronchopulmonary segments showing tree-in-bud/centrilobular nodules on HRCT is highly suggestive of NTM colonisation. (orig.)

High-resolution CT of nontuberculous mycobacterium infection in adult CF patients: diagnostic accuracy

Energy Technology Data Exchange (ETDEWEB)

McEvoy, Sinead; Lavelle, Lisa; Kilcoyne, Aoife; McCarthy, Colin; Dodd, Jonathan D. [St. Vincent' s University Hospital, Department of Radiology, Dublin (Ireland); DeJong, Pim A. [University Medical Center Utrecht, Department of Radiology, Utrecht (Netherlands); Loeve, Martine; Tiddens, Harm A.W.M. [Erasmus MC-Sophia Children' s Hospital, Department of Radiology, Department of Pediatric Pulmonology and Allergology, Rotterdam (Netherlands); McKone, Edward; Gallagher, Charles G. [St. Vincent' s University Hospital, Department of Respiratory Medicine and National Referral Centre for Adult Cystic Fibrosis, Dublin (Ireland)

2012-12-15

To determine the diagnostic accuracy of high-resolution computed tomography (HRCT) for the detection of nontuberculous mycobacterium infection (NTM) in adult cystic fibrosis (CF) patients. Twenty-seven CF patients with sputum-culture-proven NTM (NTM+) underwent HRCT. An age, gender and spirometrically matched group of 27 CF patients without NTM (NTM-) was included as controls. Images were randomly and blindly analysed by two readers in consensus and scored using a modified Bhalla scoring system. Significant differences were seen between NTM (+) and NTM (-) patients in the severity of the bronchiectasis subscore [45 % (1.8/4) vs. 35 % (1.4/4), P = 0.029], collapse/consolidation subscore [33 % (1.3/3) vs. 15 % (0.6/3)], tree-in-bud/centrilobular nodules subscore [43 % (1.7/3) vs. 25 % (1.0/3), P = 0.002] and the total CT score [56 % (18.4/33) vs. 46 % (15.2/33), P = 0.002]. Binary logistic regression revealed BMI, peribronchial thickening, collapse/consolidation and tree-in-bud/centrilobular nodules to be predictors of NTM status (R{sup 2} = 0.43). Receiver-operator curve analysis of the regression model showed an area under the curve of 0.89, P < 0.0001. In adults with CF, seven or more bronchopulmonary segments showing tree-in-bud/centrilobular nodules on HRCT is highly suggestive of NTM colonisation. (orig.)

TEA CO2 laser-induced reaction of CH3NO2 with CF2HCl: A ...

Indian Academy of Sciences (India)

Unknown

and CH3NO2 molecules as well as UV absorption of CF2 radicals are carried out to elucidate ... nitromethane and H2 under high fluence conditions 10, bright visible ... CF2HCl was monitored by gas chromatography and FTIR spectrometry.

Determination of kinetics parameters using stochastic methods in a 252Cf system

International Nuclear Information System (INIS)

Difilippo, F.C.

1988-01-01

Safety analysis and control system design of nuclear systems require the knowledge of neutron kinetics related parameters like effective delayed neutron fraction, neutron lifetime, time between neutron generations and subcriticality margins. Many methods, deterministic and stochastic, are being used, some since the beginning of nuclear power, to measure these important parameters. The method based on the use of the 252 Cf neutron source has been under intense study at the Oak Ridge National Laboratory, both experimentally and theoretically, during the last years. The increasing demand for this isotope in industrial and medical applications and new designs of advanced high flux reactors to produce it make the isotope available as neutron source (only few micrograms are necessary). A thin layer of 252 Cf is deposited in one of the electrodes of a fission chamber which produces pulses each time the 252 Cf disintegrates via α or spontaneous fission decay; the smaller pulses associated with the α decay can be easily discriminated with the important result that we known the time when v/sub c/ neutrons are injected into the system (number of neutrons per fission of 252 Cf). Thus, a small (few cm 3 ) and nonintrusive device can be used as a random pulsed neutron source with known natural properties that do no depend on biases associated with more complex interrogating devices like accelerators. This paper presents a general formalism that relates the kinetics parameters with stochastic descriptors that naturally appear because of the random nature of the production and transport of neutrons

Study of fusion reactions forming Cf nuclei

International Nuclear Information System (INIS)

Khuyagbaatar, J.; Hinde, D. J.; Du Rietz, R.; Carter, I. P.; Dasgupta, M.; Duellmann, C. E.; Evers, M.; Wakhle, A.; Williams, E.; Yakushev, A.

2013-01-01

The formation of a compound nucleus in different projectile and target combinations is a powerful method for investigating the fusion process. Recently, the dominance of quasi-fission over fusion-fission has been inferred for 34 S+ 208 Pb in comparison to 36 S+ 206 Pb; both reactions lead to the compound nucleus 242 Cf*.The mass and angle distributions of the fission fragments from these reactions were studied in order to further investigate the presence of quasi-fission. (authors)

Matrix isolation and computational study of isodifluorodibromomethane (F2CBr-Br): a route to Br2 formation in CF2Br2 photolysis.

Science.gov (United States)

George, Lisa; Kalume, Aimable; El-Khoury, Patrick Z; Tarnovsky, Alexander; Reid, Scott A

2010-02-28

The photolysis products of dibromodifluoromethane (CF(2)Br(2)) were characterized by matrix isolation infrared and UV/Visible spectroscopy, supported by ab initio calculations. Photolysis at wavelengths of 240 and 266 nm of CF(2)Br(2):Ar samples (approximately 1:5000) held at approximately 5 K yielded iso-CF(2)Br(2) (F(2)CBrBr), a weakly bound isomer of CF(2)Br(2), which is characterized here for the first time. The observed infrared and UV/Visible absorptions of iso-CF(2)Br(2) are in excellent agreement with computational predictions at the B3LYP/aug-cc-pVTZ level. Single point energy calculations at the CCSD(T)/aug-cc-pVDZ level on the B3LYP optimized geometries suggest that the isoform is a minimum on the CF(2)Br(2) potential energy surface, lying some 55 kcal/mol above the CF(2)Br(2) ground state. The energies of various stationary points on the CF(2)Br(2) potential energy surface were characterized computationally; taken with our experimental results, these show that iso-CF(2)Br(2) is an intermediate in the Br+CF(2)Br-->CF(2)+Br(2) reaction. The photochemistry of the isoform was also investigated; excitation into the intense 359 nm absorption band resulted in isomerization to CF(2)Br(2). Our results are discussed in view of the rich literature on the gas-phase photochemistry of CF(2)Br(2), particularly with respect to the existence of a roaming atom pathway leading to molecular products.

Matrix isolation and computational study of isodifluorodibromomethane (F2CBr-Br): A route to Br2 formation in CF2Br2 photolysis

International Nuclear Information System (INIS)

George, Lisa; Kalume, Aimable; Reid, Scott A.; El-Khoury, Patrick Z.; Tarnovsky, Alexander

2010-01-01

The photolysis products of dibromodifluoromethane (CF 2 Br 2 ) were characterized by matrix isolation infrared and UV/Visible spectroscopy, supported by ab initio calculations. Photolysis at wavelengths of 240 and 266 nm of CF 2 Br 2 :Ar samples (∼1:5000) held at ∼5 K yielded iso-CF 2 Br 2 (F 2 CBrBr), a weakly bound isomer of CF 2 Br 2 , which is characterized here for the first time. The observed infrared and UV/Visible absorptions of iso-CF 2 Br 2 are in excellent agreement with computational predictions at the B3LYP/aug-cc-pVTZ level. Single point energy calculations at the CCSD(T)/aug-cc-pVDZ level on the B3LYP optimized geometries suggest that the isoform is a minimum on the CF 2 Br 2 potential energy surface, lying some 55 kcal/mol above the CF 2 Br 2 ground state. The energies of various stationary points on the CF 2 Br 2 potential energy surface were characterized computationally; taken with our experimental results, these show that iso-CF 2 Br 2 is an intermediate in the Br+CF 2 Br→CF 2 +Br 2 reaction. The photochemistry of the isoform was also investigated; excitation into the intense 359 nm absorption band resulted in isomerization to CF 2 Br 2 . Our results are discussed in view of the rich literature on the gas-phase photochemistry of CF 2 Br 2 , particularly with respect to the existence of a roaming atom pathway leading to molecular products.

Tomato Cf resistance proteins mediate recognition of cognate homologous effectors from fungi pathogenic on dicots and monocots.

Science.gov (United States)

Stergiopoulos, Ioannis; van den Burg, Harrold A; Okmen, Bilal; Beenen, Henriek G; van Liere, Sabine; Kema, Gert H J; de Wit, Pierre J G M

2010-04-20

Most fungal effectors characterized so far are species-specific and facilitate virulence on a particular host plant. During infection of its host tomato, Cladosporium fulvum secretes effectors that function as virulence factors in the absence of cognate Cf resistance proteins and induce effector-triggered immunity in their presence. Here we show that homologs of the C. fulvum Avr4 and Ecp2 effectors are present in other pathogenic fungi of the Dothideomycete class, including Mycosphaerella fijiensis, the causal agent of black Sigatoka disease of banana. We demonstrate that the Avr4 homolog of M. fijiensis is a functional ortholog of C. fulvum Avr4 that protects fungal cell walls against hydrolysis by plant chitinases through binding to chitin and, despite the low overall sequence homology, triggers a Cf-4-mediated hypersensitive response (HR) in tomato. Furthermore, three homologs of C. fulvum Ecp2 are found in M. fijiensis, one of which induces different levels of necrosis or HR in tomato lines that lack or contain a putative cognate Cf-Ecp2 protein, respectively. In contrast to Avr4, which acts as a defensive virulence factor, M. fijiensis Ecp2 likely promotes virulence by interacting with a putative host target causing host cell necrosis, whereas Cf-Ecp2 could possibly guard the virulence target of Ecp2 and trigger a Cf-Ecp2-mediated HR. Overall our data suggest that Avr4 and Ecp2 represent core effectors that are collectively recognized by single cognate Cf-proteins. Transfer of these Cf genes to plant species that are attacked by fungi containing these cognate core effectors provides unique ways for breeding disease-resistant crops.

Chlorination-promoted skeletal transformation of IPR C76 discovered via trifluoromethylation under the formation of non-IPR C76(CF3)nFm.

Science.gov (United States)

Tamm, Nadezhda B; Brotsman, Victor A; Markov, Vitaliy Yu; Kemnitz, Erhard; Troyanov, Sergey I

2018-05-22

High-temperature chlorination of an Isolated-Pentagon Rule (IPR) D2-C76 fullerene followed by high-temperature trifluoromethylation of non-IPR C76 chlorides with CF3I unexpectedly resulted in a series of non-IPR C76(CF3)nFm compounds. X-ray diffraction study with the use of synchrotron radiation revealed the mixed CF3/F structures of non-classical, non-IPR C76(CF3)14, C76(CF3)14F2, and C76(CF3)16F6.

Comparative efficacy of nanofilled and microfilled resin-modified glass ionomer as pits and fissure sealant in permanent molar teeth

Directory of Open Access Journals (Sweden)

Manzuma Akhter Zakaria

2017-05-01

Full Text Available The purpose of the present study was to compare the efficacy of nanofilled and microfilled resin- modified glass ionomer as pits and fissure sealants in permanent molar teeth. Ninety six teeth having fissure at the occlusal surface were randomly divided into two groups: Group I: Treated by nanofilled resin-modified glass ionomer sealant and Group II: Treated by microfilled resin- modified glass ionomer sealants. Clinical assessment was performed by modified Ryge´s criteria by means of retention, color match, marginal adaptation at 3, 6, and 12 months follow-up visit. Chi-square test was used for testing differences between the two groups; a value of p<0.05 was considered as statistically significant. The results revealed that at 12 months observation period, nanofilled resin-modified glass ionomer sealant showed better retention, color stability and marginal adaptation than that of microfilled resin-modified glass ionomer sealants. Furthermore, the differences between two groups in respect to marginal adaptation and color match were statistically significant (p<0.05. It can be concluded that nanofilled resin-modified glass ionomer sealant could be a better alternative to microfilled resin- modified glass ionomer sealant.

Neutron activation analysis detection limits using 252Cf sources

International Nuclear Information System (INIS)

DiPrete, D.P.; Sigg, R.A.

2000-01-01

The Savannah River Technology Center (SRTC) developed a neutron activation analysis (NAA) facility several decades ago using low-flux 252 Cf neutron sources. Through this time, the facility has addressed areas of applied interest in managing the Savannah River Site (SRS). Some applications are unique because of the site's operating history and its chemical-processing facilities. Because sensitivity needs for many applications are not severe, they can be accomplished using an ∼6-mg 252 Cf NAA facility. The SRTC 252 Cf facility continues to support applied research programs at SRTC as well as other SRS programs for environmental and waste management customers. Samples analyzed by NAA include organic compounds, metal alloys, sediments, site process solutions, and many other materials. Numerous radiochemical analyses also rely on the facility for production of short-lived tracers, yielding by activation of carriers and small-scale isotope production for separation methods testing. These applications are more fully reviewed in Ref. 1. Although the flux [approximately2 x 10 7 n/cm 2 ·s] is low relative to reactor facilities, more than 40 elements can be detected at low and sub-part-per-million levels. Detection limits provided by the facility are adequate for many analytical projects. Other multielement analysis methods, particularly inductively coupled plasma atomic emission and inductively coupled plasma mass spectrometry, can now provide sensitivities on dissolved samples that are often better than those available by NAA using low-flux isotopic sources. Because NAA allows analysis of bulk samples, (a) it is a more cost-effective choice when its sensitivity is adequate than methods that require digestion and (b) it eliminates uncertainties that can be introduced by digestion processes

Determination of the QCD color factor ratio CA/CF from the scale dependence of multiplicity in three jet events

CERN Document Server

Gary, J W

2000-01-01

I examine the determination of the QCD color factor ratio CA/CF from the scale evolution of particle multiplicity in e+e- three jet events. I fit an analytic expression for the multiplicity in three jet events to event samples generated with QCD multihadronic event generators. I demonstrate that a one parameter fit of CA/CF yields the expected result CA/CF=2.25 in the limit of asymptotically large energies if energy conservation is included in the calculation. In contrast, a two parameter fit of CA/CF and a constant offset to the gluon jet multiplicity, proposed in a recent study, does not yield CA/CF=2.25 in this limit. I apply the one parameter fit method to recently published data of the DELPHI experiment at LEP and determine the effective value of CA/CF from this technique, at the finite energy of the Z0 boson, to be 1.74+-0.03+-0.10, where the first uncertainty is statistical and the second is systematic.

Stochastic tracking of infection in a CF lung.

Directory of Open Access Journals (Sweden)

Sara Zarei

Full Text Available Magnetic Resonance Imaging (MRI and Computed Tomography (CT scan are the two ubiquitous imaging sources that physicians use to diagnose patients with Cystic Fibrosis (CF or any other Chronic Obstructive Pulmonary Disease (COPD. Unfortunately the cost constraints limit the frequent usage of these medical imaging procedures. In addition, even though both CT scan and MRI provide mesoscopic details of a lung, in order to obtain microscopic information a very high resolution is required. Neither MRI nor CT scans provide micro level information about the location of infection in a binary tree structure the binary tree structure of the human lung. In this paper we present an algorithm that enhances the current imaging results by providing estimated micro level information concerning the location of the infection. The estimate is based on a calculation of the distribution of possible mucus blockages consistent with available information using an offline Metropolis-Hastings algorithm in combination with a real-time interpolation scheme. When supplemented with growth rates for the pockets of mucus, the algorithm can also be used to estimate how lung functionality as manifested in spirometric tests will change in patients with CF or COPD.

Evaluation of mass distribution data from 252Cf spontaneous fission

International Nuclear Information System (INIS)

Liu Tingjin

2003-01-01

The mass distribution data of 252 Cf spontaneous fission were evaluated based on 7 sets of available experimental data. The measured data were corrected for the standards and γ intensity used by using the new evaluated ones. The errors were made necessary adjusting. The evaluated experimental data were fitted with spline function without any restriction and with symmetric restriction. These two sets of fit data were recommended as reference data of the mass distribution of 252 Cf spontaneous fission. The errors of the recommended data were considerably reduced comparing with the measured ones. The light and heavy peaks are not completely symmetric. Also there are fine structures on the right side of the light peak at A=109-111 and left side of the heavy peak at A=137-139. These should be paid attention and studied further. (author)

Effective source size as related to 252Cf neutron radiography

International Nuclear Information System (INIS)

Wada, Nobuo; Enomoto, Shigemasa; Tachikawa, Noboru; Nojiri, Toshiaki.

1977-01-01

The effective source size in 252 Cf thermal neutron radiography, relating to its geometrical unsharpness in image formation, is experimentally studied. A neutron radiographic system consists of a 160 μg 252 Cf neutron source, water moderator and divergent cadmium lined collimator. Thermal neutron image detection is performed with using a LiF scintillator and a high speed X-ray film to employ direct exposure method. The modulation transfer function, used for describing image quality, is derived from radiographic image corresponding to a cadmium plate with sharp edge. The modulation transfer function for the system is expressed by the product of the function for both geometrical and inherent unsharpness, and allows isolation of geometrical unsharpness as related to the effective size of the thermal neutron source. It is found to be 80 -- 90% of the collimator inlet diameter. (auth.)

The psychometric properties of the Leicester Cough Questionnaire and Respiratory Symptoms in CF tool in cystic fibrosis: A preliminary study.

Science.gov (United States)

Ward, Nathan; Stiller, Kathy; Rowe, Hilary; Holland, Anne E

2017-05-01

There are few tools to quantify the impact of cough in cystic fibrosis (CF). The psychometric properties of the Leicester Cough Questionnaire (LCQ) and Respiratory Symptoms in CF (ReS-CF) tool were investigated in adults with CF. Validity and reliability were assessed in clinically stable participants who completed the questionnaires twice, along with the Cystic Fibrosis Questionnaire - Revised (CFQ-R). Responsiveness was assessed by change in questionnaires following treatment for an acute respiratory exacerbation. Correlations between the LCQ and CFQ-R respiratory domain were moderate (n=59, r s =0.78, p<0.001). Correlations between ReS-CF and CFQ-R respiratory domain were fair (r s =-0.50, p<0.001). The LCQ total score was repeatable (ICC 0.92, 95%CI 0.87-0.96, n=50). In those reporting improvement in symptoms following treatment (n=36), LCQ total score had a mean change of 4.6 (SD 3.7) and effect size of 1.2. The LCQ and ReS-CF appear to be valid, reliable and responsive in CF. www.anzctr.org.au: ACTRN12615000262505. Copyright © 2016 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

Analysis of geological material and especially ores by means of a 252Cf source

International Nuclear Information System (INIS)

Barrandon, J.N.; Borderie, B.; Melky, S.; Halfon, J.; Marce, A.

1976-01-01

Tests were made on the possibilities for analysis by 252 Cf activation in the earth sciences and mining research. The results obtained show that while 252 Cf activation can only resolve certain very specific geochemical research problems, it does allow the exact and rapid determination of numerous elements whose ores are of great economic importance such as fluorine, titanium, vanadium, manganese, copper, antimony, barium, and tungsten. The utilization of activation analysis methods in the earth sciences is not a recent phenomenon. It has generally been limited to the analysis of traces in relatively small volumes by means of irradiation in nuclear reactors. Traditional neutron sources were little used and were not very applicable. The development of 252 Cf isotopic sources emitting more intense neutron fluxes make it possible to consider carrying out more sensitive determinations without making use of a nuclear reactor. In addition, this technique can be adapted for in situ analysis in mines and mine borings. Our work which is centered upon the possibilities of instrumental laboratory analyses of geological materials through 252 Cf activation is oriented in two principal directions: the study of the experimental sensitivities of the various elements in different rocks with the usual compositions; and the study of the possibilities for routine ore analyses

Separation of 248Cm (III) from 252Cf (III) and its use in time resolved fluorescence spectroscopic (TRFS) studies

International Nuclear Information System (INIS)

Murali, M.S.; Nair, A.G.C.; Gujar, R.B.; Jain, A.; Tomar, B.S.; Godbole, S.V.; Reddy, A.V.R.; Manchanda, V.K.

2008-07-01

The present report gives a description of the methodology for the separation of 248 Cm(III) from decayed 252 Cf (III) waste solution. The waste solution was first assayed for 252 Cf content by neutron counting using a neutron well coincidence counter. The sample was subjected to the chemical separation of 248 Cm (III) from 252 Cf (III) following anion and cation exchange chromatography. The alpha spectrum of the separated curium fraction showed peaks due to 246 Cm and 248 Cm while the corresponding alpha spectrum of californium fraction showed 249,250,251,252 Cf. The gamma ray abundances of 249 Cf were determined with respect to its gamma rays of 387 keV and the data agreed well with that in literature. Separated Cm(III) was further characterized by recording its time resolved fluorescence spectrum (TRFS) in aqueous medium. (author)

Additive Manufacturing of PLA and CF/PLA Binding Layer Specimens via Fused Deposition Modeling

Science.gov (United States)

Li, Yuhang; Gao, Shiyou; Dong, Rongmei; Ding, Xuebing; Duan, Xiaoxi

2018-02-01

As one of the most popular additive manufacturing techniques, fused deposition modeling (FDM) is successfully applied in aerospace, automotive, architecture, and other fields to fabricate thermoplastic parts. Unfortunately, as a result of the limited nature of the mechanical properties and mass in raw materials, there is a pressing need to improve mechanical properties and reduce weight for FDM parts. Therefore, this paper presents an experiment of a special polylactic acid (PLA) and carbon fiber (CF)/PLA-laminated experimental specimen fabricated using the FDM process. The mechanical properties and mass analysis of the new composites for the PLA and CF/PLA binding layer specimen are investigated experimentally. Through the experimental analysis, one can conclude that the mass of laminated specimen is lighter than the CF/PLA specimen, and the tensile and flexural mechanical properties are higher than the pure PLA specimen.

Nuclear viscosity of hot rotating 240Cf

International Nuclear Information System (INIS)

Shaw, N. P.; Dioszegi, I.; Mazumdar, I.; Buda, A.; Morton, C. R.; Velkovska, J.; Beene, J. R.; Stracener, D. W.; Varner, R. L.; Thoennessen, M.

2000-01-01

The absolute γ-ray/fission multiplicities from hot rotating 240 Cf, populated at seven bombarding energies using the reaction 32 S+ 208 Pb, are reported. Statistical model calculations including nuclear dissipation have been performed to extract the dependence of the nuclear viscosity on temperature and/or nuclear deformation. The extracted nuclear dissipation coefficient is found to be independent of temperature. Large dissipation during the saddle to scission path provides a good fit to the γ-ray spectra. (c) 2000 The American Physical Society

CF2 represses Actin 88F gene expression and maintains filament balance during indirect flight muscle development in Drosophila.

Directory of Open Access Journals (Sweden)

Kathleen M Gajewski

2010-05-01

Full Text Available The zinc finger protein CF2 is a characterized activator of muscle structural genes in the body wall muscles of the Drosophila larva. To investigate the function of CF2 in the indirect flight muscle (IFM, we examined the phenotypes of flies bearing five homozygous viable mutations. The gross structure of the IFM was not affected, but the stronger hypomorphic alleles caused an increase of up to 1.5X in the diameter of the myofibrils. This size increase did not cause any disruption of the hexameric arrangement of thick and thin filaments. RT-PCR analysis revealed an increase in the transcription of several structural genes. Ectopic overexpression of CF2 in the developing IFM disrupts muscle formation. While our results indicate a role for CF2 as a direct negative regulator of the thin filament protein gene Actin 88F (Act88F, effects on levels of transcripts of myosin heavy chain (mhc appear to be indirect. This role is in direct contrast to that described in the larval muscles, where CF2 activates structural gene expression. The variation in myofibril phenotypes of CF2 mutants suggest the CF2 may have separate functions in fine-tuning expression of structural genes to insure proper filament stoichiometry, and monitoring and/or controlling the final myofibril size.

The nonhospital costs of care of patients with CF in The Netherlands: Results of a questionnaire

NARCIS (Netherlands)

M.F. Wildhagen (Mark); J.B. Verheij (Joke); J.G. Verzijl; J. Gerritsen (Jorrit); W.H. Bakker (Willem); H.B. Hilderink; L.P. ten Kate; T. Tijmstra; L. Kooij (Loes); J.D.F. Habbema (Dik)

1996-01-01

textabstractCystic fibrosis (CF) causes a relatively high medical consumption. A large part of the treatment takes place at home. Because data regarding nonhospital care are lacking, we wished to determine the costs of care of patients with CF outside the hospital. A questionnaire was sent to 73

The nonhospital costs of care of patients with CF in The Netherlands : Results of a questionnaire

NARCIS (Netherlands)

Wildhagen, MF; Verheij, JBGM; Verzijl, JG; Gerritsen, J; Bakker, W; Hilderink, HBM; tenKate, LP; Tijmstra, T; Kooij, L; Habbema, JDF

Cystic fibrosis (CF) causes a relatively high medical consumption, A large part of the treatment takes place at home, Because data regarding nonhospital care are lacking, we wished to determine the costs of care of patients with CF outside the hospital. A questionnaire was sent to 73 patients with

Direct measurements of rate coefficients for thermal decomposition of CF3I using shock—tube ARAS technique

Science.gov (United States)

Bystrov, N. S.; Emelianov, A. V.; Eremin, A. V.; Yatsenko, P. I.

2018-05-01

The kinetics of the dissociation of CF3I behind shock waves was experimentally investigated. The reaction CF3I  +  Ar  →  CF3  +  I  +  Ar was studied at temperatures between 900 and 1250 K and pressures of 2–3 bar. For this purpose, the time profiles of the concentration of atomic iodine were measured using a highly sensitive atomic resonance absorption spectroscopy method at a wavelength of 183.04 nm. From these data, the experimental value of the dissociation rate constant of CF3I was obtained: . We found that the investigated range of pressures and temperatures for the CF3I dissociation lies in the pressure transition region. Based on the Rice-Ramsperger–Kassel–Marcus theory, the threshold high and low-pressure rate constants ( and k 0) and falloff curves are calculated for the temperatures of 950–1200 K. As a result of this calculation, the threshold rate constants could be evaluated in the forms: and , and the center broadening factor, which takes into account the contribution of strong and weak collisions in the transition region, is .

Fissures in the commercial cinematic space: Screening Taiwanese documentary blockbusters

Directory of Open Access Journals (Sweden)

Hong-Chi Shiau

2016-12-01

Full Text Available This study explores the trajectory of how a new wave of documentary making has incorporated or resisted dominant social forces to create fissures in the commercial cinematic spaces. Two documentary blockbusters The Long Goodbye (2010 and Beyond Taiwan (2013 are examined to explicate how the restructuring of cinematic spaces in Taiwan has facilitated changes in documentary screening culture and spectatorships, leading to the recent documentary renaissance. This result suggests that independent filmmakers intervene and create the spaces for their documentaries, financially dependent on advance ticket sales and private sponsorship. However, relational distributive venues of documentary film within a larger public sphere are increasingly privatized and commercialized in the age of global neoliberalism. The various and creative methods applied in the exhibition of documentary blockbusters have illuminated the intersection of documentary and mainstream commercial cinema sites and practices, and have spawned associated, commercially oriented articulations. The reception study reveals that the past decade has witnessed Taiwanese audiences anxiously situate their precarious local identity against a myriad of socio-political crises: an aging and shrinking population, environmental pollution, and stagnant economy.

Effects of the toxic benthic dinoflagellate Ostreopsis cf. ovata on fertilization and early development of the sea urchin Lytechinus variegatus.

Science.gov (United States)

Neves, Raquel A F; Contins, Mariana; Nascimento, Silvia M

2018-04-01

Blooms of the benthic dinoflagellate Ostreopsis cf. ovata have been recorded with increasing frequency, intensity and geographic distribution. This dinoflagellate produces potent toxins that may cause mortality of marine invertebrates. Adults of sea urchins are commonly affected by O. cf. ovata exposure with evidence of spines loss and high mortality during periods of high dinoflagellate abundances. Here, we report on the effects of the toxic dinoflagellate O. cf. ovata on fertilization and early development of the sea urchin Lytechinus variegatus, a key ecological herbivore. Lytechinus variegatus eggs and sperm were experimentally exposed to different concentrations of Ostreopsis cf. ovata (4, 40, 400, and 4000 cells ml -1 ) to test the hypothesis that fertilization success, embryonic and larval development of the sea urchin are negatively affected by the toxic dinoflagellate even at low abundances. Reduced fertilization, developmental failures, embryo and larval mortality, and occurrence of abnormal offspring were evident after exposure to O. cf. ovata. Fertilization decreased when gametes were exposed to high O. cf. ovata abundances (400 and 4000 cells ml -1 ), but just the exposure to the highest abundance significantly reduced fertilization success. Sea urchin early development was affected by O. cf. ovata in a dose-dependent way, high dinoflagellate abundances fully inhibited the early development of L. variegatus. Ostreopsis cf. ovata significantly increased the mortality of sea urchin eggs and embryos in the first hours of exposure (∼1-3 h), regardless of dinoflagellate abundance. Abundances of 400 and 4000 O. cf. ovata cells ml -1 induced significantly higher mortality on sea urchin initial stages in the first hours, and no egg or embryo was found in these treatments after 18 h of incubation. The early echinopluteus larva was only reached in the control and in treatments with low Ostreopsis cf. ovata abundances (4 and 40 cells ml -1 ). The

Gravitational clustering of galaxies in the CfA slice

International Nuclear Information System (INIS)

Crane, P.; Saslaw, W.C.

1988-01-01

The clustering properties of the Galaxies in the CfA slice have been analyzed by comparing the properties of the neighbor distributions to the predictions of gravitational clustering theory. The agreement is excellent and implies that the observed structures can be explained by gravitational effects alone and do not require exotic explanations

Measures of large-scale structure in the CfA redshift survey slices

International Nuclear Information System (INIS)

De Lapparent, V.; Geller, M.J.; Huchra, J.P.

1991-01-01

Variations of the counts-in-cells with cell size are used here to define two statistical measures of large-scale clustering in three 6 deg slices of the CfA redshift survey. A percolation criterion is used to estimate the filling factor which measures the fraction of the total volume in the survey occupied by the large-scale structures. For the full 18 deg slice of the CfA redshift survey, f is about 0.25 + or - 0.05. After removing groups with more than five members from two of the slices, variations of the counts in occupied cells with cell size have a power-law behavior with a slope beta about 2.2 on scales from 1-10/h Mpc. Application of both this statistic and the percolation analysis to simulations suggests that a network of two-dimensional structures is a better description of the geometry of the clustering in the CfA slices than a network of one-dimensional structures. Counts-in-cells are also used to estimate at 0.3 galaxy h-squared/Mpc the average galaxy surface density in sheets like the Great Wall. 46 refs

Sorption and diffusion of cobalt, strontium, cesium and americium in natural fissure surfaces and drill core cups studied by autoradiography, 1

International Nuclear Information System (INIS)

Pinnioja, S.; Kaemaeraeinen, E.L.; Jaakkola, T.; Siitari, M.; Muuronen, S.; Lindberg, A.

1985-06-01

A method based on autoradiography was developed to determine the diffusion of radionuclides into the rock matrix. To investigate the diffusion the samples, which has been in contact with radioactive tracer solution up to 6 months, were splitted by sawing. From the autoradiograms of the cross sections the penetration depths of radionuclides were determined and the apparent diffusion coefficient Dsup(a) calculated. The filled and unfilled natural fissure surfaces chosen to this study were bars of drilling cores and drill core cups of tonalite, mica gneiss and rapakivi granite. After contact time of 3 months the highest penetration depths of cesium were observed for natural fissure surface sample of rapakivi granite up to 2.5 mm and of mica gneiss up to 3.7 mm. For strontium the penetration depths of 6 mm and 11 mm for unfilled and filled natural fissure samples of rapakivi granite were found. Dsup(a)-values for cesium varied between 1.5 x 10 -15 and 3.2 x 10 -14 , for strontium between 3.5 x 10 -14 and 2.1 x 10 -13 m 2 /s. D-value obtained for cobalt (drill core cup sample, tonalite) was 5.4 x 10 -17 m 2 /s. 241 Am was only sorbed on the surface of the sample and thus no apparent diffusion coefficient could be calculated. Filling materials, chlorite and secondary minerals in tonalite and rapakivi granite increased diffusion into the mother rock. Radionuclides were sorbed both into the filling material and through fillers into the rock matrix. Cs and Sr penetrated though calcite filling material in mica gneiss into the mother rock. Calcite didn't influence on diffusion of radionuclides. Penetration depths of Cs and Sr were about the same for filled and unfilled samples

Atmospheric chemistry of CF3C(O)O2 radicals. Kinetics of their reaction with NO2 and kinetics of the thermal decomposition of the product CF3C(O)O2NO2

DEFF Research Database (Denmark)

Wallington, T.J.; Sehested, J.; Nielsen, O.J.

1994-01-01

A pulse radiolysis technique has been used to measure a rate constant of (6.6 +/- 1.3) x 10(-12) cm3 molecule-1 s-1 for the association reaction between CF3C(O)O2 radicals and NO2 at 295 K and one atmosphere total pressure of SF6 diluent. A FTIR/smog chamber system was used to study the thermal...... decomposition CF3C(O)O2NO2. The rate of decomposition of CF3C(O)O2NO2 was independent of the total pressure of N2 diluent over the range 100-700 Torr and was fit by the expression k-1 = (1.9(-1.5)+7.6) x 10(16) exp[(-14000 +/- 480)/T] s-1. Implications for the atmospheric chemistry of CFC replacements...

Experimental study of CF4 conical theta pinch plasma expanding into vacuum

International Nuclear Information System (INIS)

Pedrow, P.D.; Nasiruddin, A.M.

1989-01-01

Langmuir probe, photodiode, and optical multichannel analyzer (OMA) measurements have been made on a pulsed CF 4 conical theta pinch plasma. A cloud of CF 4 gas was puffed into a conical theta pinch coil, converted to plasma, and propelled into the vacuum region ahead of the expanding gas cloud. At a position 67 cm away from the conical theta pinch coil, the plasma arrived in separate packets that were about 20 μs in duration. The average drift velocity of these packets corresponded to an energy of about 3 eV. The OMA measurements showed that the second packet contained neutral atomic fluorine as well as charged particles

Fissure sealants: in vitro evaluation of abrasion wear and superficial roughness

Directory of Open Access Journals (Sweden)

Vanessa Pardi

2008-06-01

Full Text Available The aim of this study was to compare the in vitro wear and superficial roughness of four materials (Delton Dyract Flow, Dentsply; Filtek Flow, Vitremer, 3M ESPE used as fissure sealant in 32 extracted human molars divided in four groups (n = 8 after abrasion with toothbrush/dentifrice. Impressions of each occlusal surface were made to analyze wear and circular specimens were prepared to analyze the roughness. Teeth and specimens were mounted in a toothbrushing machine. The replicas were observed using a SEM to determine the superficial wear. Wear: there were no statistically significant differences either between Delton and Filtek Flow or between Dyract Flow and Vitremer. Roughness: there were no statistical differences between Filtek Flow and Dyract Flow, Dyract Flow and Vitremer, Vitremer and Delton., Considering the clinical practice, if caries activity is present the use of Vitremer is suggested not only for its well known fluoride release, but it presented good roughness results.

A Phase I/II Protocol Using 252Cf for the Treatment of Cervical Carcinoma

International Nuclear Information System (INIS)

Anita Mahajan; Mark J. Rivard; Evelyn R. Nunez; David E. Wazer

2000-01-01

For this clinical study, external photon beam irradiation will be given in a standard fashion with intravenous cisplatinum (CDDP) every week as a radiosensitizing agent. We will incorporate 252 Cf as the brachytherapy source replacing 192 Ir, theoretically improving patient outcomes with its lack of cell cycle and oxygen dependence, and a therapeutic ratio possibly greater than unity. Local tumor control and control of systemic disease are potentially feasible using 252 Cf to initially debulk and destroy local bulky tumor with CDDP and X rays to enhance treatment efficacy and treat minimal microscopic and distant micrometastases. The initial 22 Cf dose will be 1 Gy per weekly fraction with 0.25-Gy increments toward a 2.5-Gy limit. Patients will be stratified according to their stage, toxicities and outcomes will be monitored closely, and the study will be halted if undo morbidities are noted

Emission cross sections in low-energy collisions between He{sup +}, Ne{sup +} ions and CF{sub 4} molecule

Energy Technology Data Exchange (ETDEWEB)

Motohashi, Kenji; Takahashi, Tetsuro; Takahashi, Naruto; Tsurubuchi, Seiji [Department of Applied Physics, Tokyo University of Agriculture and Technology, 2-24-16 Koganei, Tokyo 184-8588 (Japan)

2005-09-28

Emission cross sections (Q{sub em}) of CF{sup +}{sub 4}(C-tilde - A-tilde, C-tilde - X-tilde; 200-500 nm), CF{sup +}{sub 4}(D-tilde - C-tilde, 350-440 nm), F(3p {sup 4}D{sup o}{sub 7/2}-3s {sup 4}P{sub 5/2}; 685.6 nm), He(3d {sup 3}D-2p {sup 3}P{sup o}; 587.6 nm), and Ne(3p {sup 2}[5/2]-3s {sup 2}[3/2]; 640.2 nm) produced in charge-exchange collisions between He{sup +} and Ne{sup +} and CF{sub 4} molecule were measured in the energy range below 5000 eV down to 1 eV (E{sub Lab}). Emission cross sections of F(3s {sup 2}P-2p{sup 5} {sup 2}P{sup o}; 95.5 nm) and F(3s {sup 4}P-2p{sup 5} {sup 2}P{sup o}; 97.5 nm) were also measured in He{sup +}+CF{sub 4}. No emission peaks were observed in the spectrum of Ar{sup +}+CF{sub 4} (E{sub Lab} = 2000 eV) in the wavelength range of 200-800 nm. The emission cross section of CF{sup +}{sub 4}(C-tilde - A-tilde, C-tilde - X-tilde; 200-500 nm) observed in Ne{sup +}+CF{sub 4} decreased with increasing the energy with a relation of Q{sub em} {proportional_to} E{sup -1/2}{sub CM} up to 60 eV, whereas it increased with increasing the energy above 100 eV. This result agreed well with one of Sasaki et al [1]. It was concluded that such dependence below 60 eV originated from an orbiting resonance into Ne+CF{sup +}{sub 4} (C-tilde{sup 2}T{sub 2}) channel. Emission cross sections of F, He and Ne rapidly increased with increasing the energy from the near thresholds.

Calculation of dose distribution for 252Cf fission neutron source in tissue equivalent phantoms using Monte Carlo method

International Nuclear Information System (INIS)

Ji Gang; Guo Yong; Luo Yisheng; Zhang Wenzhong

2001-01-01

Objective: To provide useful parameters for neutron radiotherapy, the author presents results of a Monte Carlo simulation study investigating the dosimetric characteristics of linear 252 Cf fission neutron sources. Methods: A 252 Cf fission source and tissue equivalent phantom were modeled. The dose of neutron and gamma radiations were calculated using Monte Carlo Code. Results: The dose of neutron and gamma at several positions for 252 Cf in the phantom made of equivalent materials to water, blood, muscle, skin, bone and lung were calculated. Conclusion: The results by Monte Carlo methods were compared with the data by measurement and references. According to the calculation, the method using water phantom to simulate local tissues such as muscle, blood and skin is reasonable for the calculation and measurements of dose distribution for 252 Cf

Inorganic carbon cycle in soil-rock-groundwater system in karst and fissured aquifers

Directory of Open Access Journals (Sweden)

Ajda Koceli

2013-12-01

Full Text Available The paper presents a systematic analysis of the isotopic composition of carbon (δ13CCaCO3 in carbonate rocks in central Slovenia, representing karst and fissured aquifers, and share of carbon contributions from carbonate dissolution and degradation of organic matter in aquifers, calculated from the mass balance equation. 59 samples of rocks (mainly dolomites from Upper Permian to Upper Triassic age were analyzed. Samples of carbonate rocks were pulverized and ground to fraction of 45 μm and for determination of δ13CCaCO3 analyzed with mass spectrometer for analyses of stable isotopes of light elements-IRMS. The same method was used for determination of isotopic composition of dissolved inorganic carbon (δ13CDIC in groundwater for 54 of 59 locations. Values of δ13CCaCO3 are in the range from -2.0 ‰ to +4.1 ‰, with an average δ13CCaCO3 value of +2.2 ‰. These values are typical for marine carbonates with δ13CCaCO3 around 0 ‰, although δ13CCaCO3 values differ between groups depending on the origin and age. Early diagenetic dolomites have relatively higher values of δ13CCaCO3 compared to other analyzed samples. The lowest values of δ13CCaCO3 were observed in Cordevolian and Bača dolomite, probably due to late diagenesis, during which meteoric water with lower isotopic carbon composition circulated in the process of sedimentation. Values of δ13CDIC range from -14.6 ‰ to -8.2 ‰. Higher δ13CDIC values (-8.2 ‰ indicate a low proportion of soil CO2 in the aquifer and rapid infiltration, while lower values (-14.6 ‰ indicate higher proportion of soil CO2 in the aquifer and slower infiltration. Calculated contributions of carbon from organic matter / dissolution of carbonates in the karstic and fissured aquifers s how a similar proportion (50 % : 50 %.

Cf-252 based neutron radiography using real-time image processing system

International Nuclear Information System (INIS)

Mochiki, Koh-ichi; Koiso, Manabu; Yamaji, Akihiro; Iwata, Hideki; Kihara, Yoshitaka; Sano, Shigeru; Murata, Yutaka

2001-01-01

For compact Cf-252 based neutron radiography, a real-time image processing system by particle counting technique has been developed. The electronic imaging system consists of a supersensitive imaging camera, a real-time corrector, a real-time binary converter, a real-time calculator for centroid, a display monitor and a computer. Three types of accumulated NR image; ordinary, binary and centroid images, can be observed during a measurement. Accumulated NR images were taken by the centroid mode, the binary mode and ordinary mode using of Cf-252 neutron source and those images were compared. The centroid mode presented the sharpest image and its statistical characteristics followed the Poisson distribution, while the ordinary mode showed the smoothest image as the averaging effect by particle bright spots with distributed brightness was most dominant. (author)

High-density plasma etching characteristics of indium-gallium-zinc oxide thin films in CF4/Ar plasma

International Nuclear Information System (INIS)

Joo, Young-Hee; Kim, Chang-Il

2015-01-01

We investigated the etching process of indium-gallium-zinc oxide (IGZO) thin films in an inductively coupled plasma system. The dry etching characteristics of the IGZO thin films were studied by varying the CF 4 /Ar gas mixing ratio, RF power, DC-bias voltage, and process pressure. We determined the following optimized process conditions: an RF power of 700 W, a DC-bias voltage of − 150 V, and a process pressure of 2 Pa. A maximum etch rate of 25.63 nm/min for the IGZO thin films was achieved in a plasma with CF 4 /Ar(= 25:75), and the selectivity of IGZO to Al and TiN was found to be 1.3 and 0.7, respectively. We determined the ionic composition of the CF 4 /Ar plasma using optical emission spectroscopy. Analysis of chemical reactions at the IGZO thin film surfaces was performed using X-ray photoelectron spectroscopy. - Highlights: • IGZO thin film was etched by CF 4 /Ar plasma as a function of gas mixing ratio. • IGZO bonds were broken Ar + sputtering and then reacted with the C-F x radicals. • The physical sputtering is dominant in etch control compared with chemical etching

Implications of the recent D-T μCF experiments at RIKEN-RAL and near-future directions

International Nuclear Information System (INIS)

Nagamine, K.; Matsuzaki, T.; Ishida, K.; Nakamura, S.N.; Kawamura, N.

1999-01-01

The paper describes physics implications obtained through the recent experimental results on D-T μCF at RIKEN-RAL. Smaller sticking and larger cycling rates in solid/liquid D-T mixture than the theoretical predictions were observed, suggesting needs of further theoretical understandings. Some possible future directions in D-T μCF experiments are also described

Results of the study of a new Groznensky Field with fissured reservoir rocks

Energy Technology Data Exchange (ETDEWEB)

Lebedinets, N P; Merkulov, A V; Pristanskii, G T; Postash, M F

1970-06-01

Geological information on the Eldarovsky field, situated in the central part of Tersky anticlinal zone and discovered in 1964, is given. Commercial quantities of oil were discovered in the foraminifera (thickness 40 to 70 m) and Upper Cretaceous (305 to 330 m thickness) deposits, consisting of fissured limestones and marls. Both the foraminifera and Upper Cretaceous deposits are divided into various zones which are hydrodynamically connected with each other and constitute a single pool. No hydrodynamical connection was observed between the Eldarovsky pools and surrounding oil fields. The secondary porosity of the Upper Cretaceous and forammifera deposits is 0.49% and 0.2%, respectively, and is responsible for most of the oil reserves. The analysis of the pressure buildup curves shows that the field has an elastic water drive.

IRAS galaxies and the large-scale structure in the CfA slice

Science.gov (United States)

Babul, Arif; Postman, Marc

1990-01-01

The spatial distributions of the IRAS and the optical galaxies in the first CfA slice are compared. The IRAS galaxies are generally less clustered than optical ones, but their distribution is essentially identical to that of late-type optical galaxies. The discrepancy between the clustering properties of the IRAS and optical samples in the CfA slice region is found to be entirely due to the paucity of IRAS galaxies in the core of the Coma cluster. The spatial distributions of the IRAS and the optical galaxies, both late and early types, outside the dense core of the Coma cluster are entirely consistent with each other. This conflicts with the prediction of the linear biasing scenario.

Uptake of dissolved inorganic and organic nitrogen by the benthic toxic dinoflagellate Ostreopsis cf. ovata.

Science.gov (United States)

Jauzein, Cécile; Couet, Douglas; Blasco, Thierry; Lemée, Rodolphe

2017-05-01

Environmental factors that shape dynamics of benthic toxic blooms are largely unknown. In particular, for the toxic dinoflagellate Ostreopsis cf. ovata, the importance of the availability of nutrients and the contribution of the inorganic and organic pools to growth need to be quantified in marine coastal environments. The present study aimed at characterizing N-uptake of dissolved inorganic and organic sources by O. cf. ovata cells, using the 15 N-labelling technique. Experiments were conducted taking into account potential interactions between nutrient uptake systems as well as variations with the diel cycle. Uptake abilities of O. cf. ovata were parameterized for ammonium (NH 4 + ), nitrate (NO 3 - ) and N-urea, from the estimation of kinetic and inhibition parameters. In the range of 0 to 10μmolNL -1 , kinetic curves showed a clear preference pattern following the ranking NH 4 + >NO 3 - >N-urea, where the preferential uptake of NH 4 + relative to NO 3 - was accentuated by an inhibitory effect of NH 4 + concentration on NO 3 - uptake capabilities. Conversely, under high nutrient concentrations, the preference for NH 4 + relative to NO 3 - was largely reduced, probably because of the existence of a low-affinity high capacity inducible NO 3 - uptake system. Ability to take up nutrients in darkness could not be defined as a competitive advantage for O. cf. ovata. Species competitiveness can also be defined from nutrient uptake kinetic parameters. A strong affinity for NH 4 + was observed for O. cf. ovata cells that may partly explain the success of this toxic species during the summer season in the Bay of Villefranche-sur-mer (France). Copyright © 2017 Elsevier B.V. All rights reserved.

Effects of sintering additives on the microstructural and mechanical properties of the ion-irradiated SiCf/SiC

Science.gov (United States)

Fitriani, Pipit; Sharma, Amit Siddharth; Yoon, Dang-Hyok

2018-05-01

SiCf/SiC composites containing three different types of sintering additives viz. Sc-nitrate, Al2O3-Sc2O3, and Al2O3-Y2O3, were subjected to ion irradiation using 0.2 MeV H+ ions with a fluence of 3 × 1020 ions/m2 at room temperature. Although all composites showed volumetric swelling upon ion irradiation, SiCf/SiC with Sc-nitrate showed the smallest change followed by those with the Al2O3-Sc2O3 and Al2O3-Y2O3 additives. In particular, SiCf/SiC containing the conventional Al2O3-Y2O3 additive revealed significant microstructural changes, such as surface roughening and the formation of cracks and voids, resulting in reduced fiber pullout upon irradiation. On the other hand, the SiCf/SiC with Sc-nitrate showed the highest resistance against ion irradiation without showing any macroscopic changes in surface morphology and mechanical strength, indicating the importance of the sintering additive in NITE-based SiCf/SiC for nuclear structural applications.

Fluorocarbon polymer formation, characterization, and reduction in polycrystalline-silicon etching with CF4-added plasma

International Nuclear Information System (INIS)

Xu Songlin; Sun Zhiwen; Chen Arthur; Qian Xueyu; Podlesnik, Dragan

2001-01-01

Addition of CF 4 into HBr-based plasma for polycrystalline-silicon gate etching reduces the deposition of an etch byproduct, silicon oxide, onto the chamber wall but tends to generate organic polymer. In this work, a detailed study has been carried out to analyze the mechanism of polymerization and to characterize the polymer composition and quantity. The study has shown that the polymer formation is due to the F-radical depletion by H atoms dissociated from HBr. The composition of the polymer changes significantly with CF 4 concentration in the gas feed, and the polymer deposition rate depends on CF 4 % and other process conditions such as source power, bias power, and pressure. Surface temperature also affects the polymer deposition rate. Adding O 2 into the plasma can clean the organic polymer, but the O 2 amount has to be well controlled in order to prevent the formation of silicon oxide. Based on a series of tests to evaluate polymer deposition and oxide cleaning with O 2 addition, an optimized process regime in terms of O 2 -to-CF 4 ratio has been identified to simultaneously suppress the polymer and oxide deposition so that the etch process becomes self-cleaning

Dry etching of new phase-change material Al1.3Sb3Te in CF4/Ar plasma

International Nuclear Information System (INIS)

Zhang Xu; Rao Feng; Liu Bo; Peng Cheng; Zhou Xilin; Yao Dongning; Guo Xiaohui; Song Sannian; Wang Liangyong; Cheng Yan; Wu Liangcai; Song Zhitang; Feng Songlin

2012-01-01

The dry etching characteristic of Al 1.3 Sb 3 Te film was investigated by using a CF 4 /Ar gas mixture. The experimental control parameters were gas flow rate into the chamber, CF 4 /Ar ratio, the O 2 addition, the chamber background pressure, and the incident RF power applied to the lower electrode. The total flow rate was 50 sccm and the behavior of etch rate of Al 1.3 Sb 3 Te thin films was investigated as a function of the CF 4 /Ar ratio, the O 2 addition, the chamber background pressure, and the incident RF power. Then the parameters were optimized. The fast etch rate was up to 70.8 nm/min and a smooth surface was achieved using optimized etching parameters of CF 4 concentration of 4%, power of 300 W and pressure of 80 mTorr.

The temporal requirement for vitamin A in the developing eye: mechanism of action in optic fissure closure and new roles for the vitamin in regulating cell proliferation and adhesion in the embryonic retina.

Science.gov (United States)

See, Angela Wai-Man; Clagett-Dame, Margaret

2009-01-01

Mammalian eye development requires vitamin A (retinol, ROL). The role of vitamin A at specific times during eye development was studied in rat fetuses made vitamin A deficient (VAD) after embryonic day (E) 10.5 (late VAD). The optic fissure does not close in late VAD embryos, and severe folding and collapse of the retina is observed at E18.5. Pitx2, a gene required for normal optic fissure closure, is dramatically downregulated in the periocular mesenchyme in late VAD embryos, and dissolution of the basal lamina does not occur at the optic fissure margin. The addition of ROL to late VAD embryos by E12.5 restores Pitx2 expression, supports dissolution of the basal lamina, and prevents coloboma, whereas supplementation at E13.5 does not. Surprisingly, ROL given as late as E13.5 completely prevents folding of the retina despite the presence of an open fetal fissure, showing that coloboma and retinal folding represent distinct VAD-dependent defects. Retinal folding due to VAD is preceded by an overall reduction in the percentage of cyclin D1 positive cells in the developing retina, (initially resulting in retinal thinning), as well as a dramatic reduction in the cell adhesion-related molecules, N-cadherin and beta-catenin. Reduction of retinal cell number combined with a loss of the normal cell-cell adhesion proteins may contribute to the collapse and folding of the retina that occurs in late VAD fetuses.

Atmospheric chemistry of HFC-134a. Kinetic and mechanistic study of the CF3CFHO2 + NO2 reaction

DEFF Research Database (Denmark)

Møgelberg, T.E.; Nielsen, O.J.; Sehested, J.

1994-01-01

A pulse radiolysis system was used to study the kinetics of the reaction of CF3CFHO2 with NO2. By monitoring the rate of the decay of NO2 using its absorption at 400 nm the reaction rate constant was determined to be k = (5.0 +/- 0.5) x 10(-12) cm3 molecule-1 s-1. A long path length Fourier......-transform infrared technique was used to investigate the thermal decomposition of the product CF3CFHO2NO2. At 296 K in the presence of 700 Torr of air, decomposition of CF3CFHO2NO2 was rapid (greater than 90% decomposition within 3 min). The results are discussed in the context of atmospheric chemistry of CF3CFH2...

A three-dimensional model of the atmospheric chemistry of E and Z-CF3CH=CHCl (HCFO-1233(zd) (E/Z))

Science.gov (United States)

Sulbaek Andersen, Mads P.; Schmidt, Johan A.; Volkova, Aleksandra; Wuebbles, Donald J.

2018-04-01

Using a 3-dimensional global atmospheric chemistry and transport model we investigated the atmospheric degradation of HCFO-1233zd(E), E-CF3CH=CHCl, a commercially important, new hydrofluorocarbon replacement compound. Atmospheric degradation of E-CF3CH=CHCl is initiated by reaction with OH radicals, which leads to several chemical oxidation products. Dissemination of these oxidation products to the environment is of concern due to the possible formation of trifluoroacetic acid (TFA) as a degradation product. The model indicates that the average global yield of TFA from atmospheric processing of E-CF3CH=CHCl is approximately 2%. The annually averaged atmospheric lifetime of E-CF3CH=CHCl was found to be approximately 36 days (12 days for Z-CF3CH=CHCl). As E-CF3CH=CHCl is short lived, by far the majority of its Cl atoms will be released and deposited in the lower atmosphere, and the impact on stratospheric ozone is insignificant. An Ozone Depletion Potential of 0.00030 was determined. The Photochemical Ozone Creation Potential was evaluated and a value of 3.6 determined. Finally, we derive a Global Warming Potential for E-CF3CH=CHCl for a 100 year time horizon of model.

Monte Carlo simulation using MCNP4B for an optimal shielding design of a 252 Cf source

International Nuclear Information System (INIS)

Silva, Ademir X. da; Crispim, Verginia R.

2001-01-01

This study aim to investigate an optimum shielding design against neutrons and gamma-rays from a source of 252 Cf, using Monte Carlo simulation. The shielding materials studied were: borated polyethylene, borated-lead polyethylene and stainless steel. The Monte Carlo code MCNP, version 4B, was used to design shielding for 252 Cf based neutron irradiator systems. By normalizing the dose equivalent rate values presented to the neutron production rate of the source, the resulting calculations are independents of the intensity of actual 252 Cf source. The results shown what the total dose equivalent rates were reduced significantly by the shielding system optimization. (author)

An Experimental Study on Hybrid Noncompression CF Bracing and GF Sheet Wrapping Reinforcement Method to Restore Damaged RC Structures

Directory of Open Access Journals (Sweden)

Kang Seok Lee

2015-01-01

Full Text Available We describe a novel technique for restoration of reinforced concrete (RC structures that have sustained damage during an earthquake. The reinforcement scheme described here is a hybrid seismic retrofitting technique that combines noncompression X-bracing using CF with externally bonded GF sheets to strengthen RC structures that have sustained damage following an earthquake. The GF sheet is used to improve the ductility of columns, and the noncompression CF X-bracing system, which consists of CF bracing and anchors to replace the conventional steel bracing and bolt connections, is used to increase the lateral strength of the framing system. We report seismic restoration capacity, which enables reuse of the damaged RC frames via the hybrid CF X-bracing and GF sheet wrapping system. Cyclic loading tests were carried out to investigate hysteresis of the lateral load-drift relations, as well as the ductility. The GF sheet significantly improved the ductility of columns, resulting in a change in failure mode. The strengthening effect of conventional CF sheets used in columns is not sufficient with respect to lateral strength and stiffness. However, this study results in a significant increase in the strength of the structure due to the use of CF X-bracing and inhibited buckling failure of the bracing. This result can be exploited to develop guidelines for the application of the reinforcement system to restore damaged RC structures.

Hidden Broad Line Seyfert 2 Galaxies in the CfA and 12micron Samples

OpenAIRE

Tran, Hien D.

2001-01-01

We report the results of a spectropolarimetric survey of the CfA and 12micron samples of Seyfert 2 galaxies (S2s). Polarized (hidden) broad line regions (HBLRs) are confirmed in a number of galaxies, and several new cases (F02581-1136, MCG -3-58-7, NGC 5995, NGC 6552, NGC 7682) are reported. The 12micron S2 sample shows a significantly higher incidence of HBLR (50%) than its CfA counterpart (30%), suggesting that the latter may be incomplete in hidden AGNs. Compared to the non-HBLR S2s, the H...

Kr and Xe isotopes from spontaneous fission of 248Cm and 250Cf

International Nuclear Information System (INIS)

Srinivasan, B.

1980-01-01

Relative yields of Kr and Xe isotopes from the spontaneous fission of 248 Cm and 250 Cf have been determined mass spectrometrically. The yields are as follows: 83 Kr/ 84 Kr/ 85 Kr/ 86 Kr = 0.223/0.458/0.596/ identical 1.00 and 0.306/0.582/0.793/ identical 1.00; 131 Xe/ 134 Xe/ 136 Xe = 0.486/0.819/1.075 identical 1.00 and 0.343/0.506/0.851/ identical 1.00 from 248 Cm and 250 Cf, respectively. The Xe yields from 248 Cm agree with an earlier determination by Leich et al. Neither of these yield patterns matches that of fissiogenic Kr and Xe in carbonaceous chondrites and hence 248 Cm and 250 Cf are ruled out as progenitors of the meteoritic Kr and Xe. In general, none of the spontaneously fissioning nuclides of actinide elements can be identified as a possible progenitor. Even the mixtures of actinides, including a combination of 248 Cm and 250 Cm, are unsuitable. The origin of anomalous Kr and Xe in carbonaceous chondrites must then be traced either to the spontaneous fission of a superheavy element or to peculiarities in specific nucleosynthetic reactions. (orig.)

Etching of anode wire deposits with CF4/isobutane (80:20) avalanches

International Nuclear Information System (INIS)

Openshaw, R.; Henderson, R.S.; Faszer, W.; Salomon, M.

1991-01-01

An ionization exposure of 0.5 C per cm of wire in a gas mixture of CF 4 /isobutane (80:20) is shown to reverse anode wire damage in single-wire chambers. Several chambers aged in argon/ethane (50:50) and argon/ethane/ethanol (50:50:0.2) and having pulse height reduction of 25-30% have recovered pulse heights and currents to greater than 98% of their initial values. Inspection of the anode wires indicates that the thick deposits caused by the exposure in argon/ethane have been removed. Auger electron spectroscopy reveals only a thin residual layer containing primarily carbon and oxygen. This etching ability of CF 4 /isobutane (80:20) avalanches may explain the extremely good ageing characteristics previously reported for this mixture. (orig.)

Environmental Fatigue Behaviors of CF8M Stainless Steel in 310 .deg. C Deoxygenated Water - Effects of Hydrogen and Microstructure

Energy Technology Data Exchange (ETDEWEB)

Jang, Hun; Cho, Pyungyeon; Jang, Changheui [KAIST, Daejeon (Korea, Republic of); Kim, Tae Soon [Korea Hydro and Nuclear Power Corporation, Seoul (Korea, Republic of)

2014-01-15

The effects of environment and microstructure on low cycle fatigue (LCF) behaviors of CF8M stainless steels containing 11% of ferrites were investigated in a 310 .deg. C deoxygenated water environment. The reduction of LCF life of CF8M in a 310 .deg. C deoxygenated water was smaller than 316LN stainless steels. Based on the microstructure and fatigue surface analyses, it was confirmed that the hydrogen induced cracking contributed to the reduction in LCF life for CF8M as well as for 316LN. However, many secondary cracks were found on the boundaries of ferrite phases in CF8M, which effectively reduced the stress concentration at the crack tip. Because of the reduced stress concentration, the accelerated fatigue crack growth by hydrogen induced cracking was less significant, which resulted in the smaller environmental effects for CF8M than 316LN in a 310 .deg. C deoxygenated water.

Do pre-school lung ventilation scans predict outcome by 6 years of age in children with Cystic Fibrosis (CF)?

OpenAIRE

Yahia, R; Viviani, L; Carr, S; Bush, A

2015-01-01

Introduction and objectives Progressive respiratory disease accounts for most of the mortality and morbidity in CF. Identification of early lung disease is imperative to recognise young patients who are at high risk of developing future lung damage. The London CF collaboration has shown that infant pulmonary function at one and at two years is essentially normal, and one year HRCT has mild abnormalities only, so new markers need to be identified. We have used ventilation scans (VS) at the CF ...

Treatment of Plaque-Type Psoriasis With Oral CF101: Data from a Phase II/III Multicenter, Randomized, Controlled Trial.

Science.gov (United States)

David, Michael; Gospodinov, Dimitar Konstantinov; Gheorghe, Nicola; Mateev, Grisha Stefanov; Rusinova, Mariyana Venelinova; Hristakieva, Evgeniya; Solovastru, Laura Gheuca; Patel, Rita V; Giurcaneanu, Calin; Hitova, Mariela Chepileva; Purcaru, Anca Ioana; Horia, Beti; Tsingov, Iliya Iliev; Yankova, Rumyana Kaloferova; Kadurina, Miroslava Ilieva; Ramon, Michal; Rotaru, Maria; Simionescu, Olga; Benea, Vasile; Demerdjieva, Zdravka Velichkova; Cosgarea, Maria Rodica; Morariu, Horia Silviu; Michael, Ziv; Cristodor, Patricia; Nica, Carmen; Silverman, Michael H; Bristol, David R; Harpaz, Zivit; Farbstein, Motti; Cohen, Shira; Fishman, Pnina

2016-08-01

CF101, an adenosine A3 receptor agonist, is an orally bioavailable small molecule drug presenting an anti-psoriatic effect demonstrated in a Phase 2 clinical trial in psoriasis patients. To evaluate the safety and efficacy of CF101 treatment in a Phase 2/3 study in patients with moderate to severe plaque-type psoriasis. This multicenter, double-blind, 2-segment, placebo-controlled study randomized subjects with moderate to severe plaque psoriasis to CF101 1 or 2 mg, or placebo twice daily. At either week 12 (Segment 1) or 16 (Segment 2), the placebo group crossed over to CF101 BID through week 32 in an open-label fashion. At week 12, following an interim analysis, the CF101 1mg group was discontinued due to futility. The primary endpoint was proportion of patients achieving ≥75% improvement in Psoriasis Area Severity Index (PASI 75). Efficacy testing was performed using the Cochran-Mantel Haenszel test, the primary analysis of PASI 75 was performed at the 0.035 significance level. CF101 had an excellent safety profile at all tested dosages with a profile similar to the placebo group. The most common adverse events were infections and gastrointestinal events, and there was no cumulative intolerance over the 32-week dosing period. The study did not meet the primary endpoint of PASI 75 at week 12 (2 mg: 8.5% vs. placebo: 6.9%, P=0.621). However, at week 32, PASI mean percent improvement with CF101 2 mg was 57% (P<0.001) compared to baseline, with linear improvement in PASI 50 (63.5%), 75 (35.5%), 90 (24.7%), and 100 (10.6%). Oral CF101 was found to be safe and very well tolerated, demonstrating evidence of efficacy in patients with moderate to severe plaque psoriasis through 32 weeks of treatment. J Drugs Dermatol. 2016;15(8):931-938.

Trifluoroethylation of Alkynes: Synthesis of Allylic-CF3 Compounds by Visible-Light Photocatalysis

Institute of Scientific and Technical Information of China (English)

Geum-bee Roh; Naeem Iqbal; Eun Jin Cho

2016-01-01

Two types of allylic trifluoromethylated compounds were synthesized by reacting alkynes with CF3CH2I using visible-light photocatalysis.Subtle differences in the catalytic system controlled the selectivity of iodotrifluoroethylation and hydrotrifluoroethylation.The iodotrifluoroethylated products were obtained in the presence of [Ru(bpy)3]C12 and TMEDA in CH3CN under visible-light irradiation,whereas hydrotrifluoroethylated products were synthesized usingfac-[Ir(ppy)3] and a mixture of DBU and K2CO3 in DMF.The iodotrifluoroethylation reaction worked particularly well,even at gram-scale,and the synthetic utility of iodotrifluoroethylated products was proved by their coupling reactions,providing complex CF3-containing products.

Combination of forward osmosis (FO) process with coagulation/flocculation (CF) for potential treatment of textile wastewater.

Science.gov (United States)

Han, Gang; Liang, Can-Zeng; Chung, Tai-Shung; Weber, Martin; Staudt, Claudia; Maletzko, Christian

2016-03-15

A novel combination of forward osmosis (FO) process with coagulation/flocculation (CF) (FO-CF) has been experimentally conceived for the treatment and reuse of textile wastewater. FO is employed to spontaneously recover water from the wastewater via osmosis and thus effectively reduces its volume with a dramatically enhanced dye concentration. CF is then applied to precipitate and remove dyes from the FO concentrated stream with much improved efficiency and reduced chemical dosage. The FO-CF hybrid system exhibits unique advantages of high water flux and recovery rate, well controlled membrane fouling, high efficiency, and minimal environmental impact. Using a lab-made thin-film composite (TFC) FO membrane, an initial water flux (Jw) of 36.0 L m(-2) h(-1) with a dye rejection of 99.9% has been demonstrated by using 2 M NaCl as the draw solution and synthetic textile wastewater containing multiple textile dyes, inorganic salts and organic additives as the feed under the FO mode. The Jw could be maintained at a high value of 12.0 L m(-2) h(-1) even when the recovery rate of the wastewater reaches 90%. Remarkable reverse fouling behavior has also been observed where the Jw of the fouled membrane can be almost fully restored to the initial value by physical flushing without using any chemicals. Due to the great dye concentration in the FO concentrated wastewater stream, the CF process could achieve more than 95% dye removal with a small dosage of coagulants and flocculants at 500-1000 ppm. The newly developed FO-CF hybrid process may open up new exploration of alternative technologies for the effective treatment and reuse of textile effluents. Copyright © 2016 Elsevier Ltd. All rights reserved.

The impact of social constraints and sense of coherence on the psychological adjustment of adolescents and young adults with CF

Directory of Open Access Journals (Sweden)

Kaya L. Beinke

2015-12-01

Full Text Available In the last two decades, the medical understanding of Cystic Fibrosis (CF has dramatically improved, however, there are still significant gaps in our understanding of the psychological adjustment of families coping with CF. We examined the utility of the Social Cognitive Processing (SCP Model in understanding the interactions of parents and young people with CF. We also examined the relationship between social constraints, a key construct in the SCP model, sense of coherence (SOC and other psychological adjustment indicators for young people with CF. Participants comprised 49 individuals with CF, aged 16–25, recruited through state-based CF organisations in Australia. The results indicated that participant ratings of difficulties with communication (social constraints were positively associated with ratings of depression, anxiety, and stress and negatively related to ratings of positive affect and seeing life challenges as predictable, manageable and meaningful (SOC. Ratings of SOC were also positively related to ratings of positive affect and negatively related to ratings of depression, anxiety and stress. A significant mediating effect of SOC was also identified in the relationships between social constraints and positive affect and social constraints and stress. The theoretical and clinical implications of these findings are discussed.

Ternary particle yields in 249Cf(nth,f)

Science.gov (United States)

Tsekhanovich, I.; Büyükmumcu, Z.; Davi, M.; Denschlag, H. O.; Gönnenwein, F.; Boulyga, S. F.

2003-03-01

An experiment measuring ternary particle yields in 249Cf(nth,f) was carried out at the high flux reactor of the Institut Laue-Langevin using the Lohengrin recoil mass separator. Parameters of energy distributions were determined for 27 ternary particles up to 30Mg and their yields were calculated. The yields of 17 further ternary particles were estimated on the basis of the systematics developed. The heaviest particles observed in the experiment are 37Si and 37S; their possible origin is discussed.

Influence of Fissure Number on the Mechanical Properties of Layer-Crack Rock Models under Uniaxial Compression

Directory of Open Access Journals (Sweden)

Yun-liang Tan

2018-01-01

Full Text Available Many case studies have revealed that rock bursts generally occur in the high stress concentration area where layer-crack structures often exist, especially for brittle coal or rock masses. Understanding the mechanical properties of layer-crack rock models is beneficial for rational design and stability analysis of rock engineering project and rock burst prevention. This study experimentally investigated the influence of fissure number on the mechanical properties of layer-crack rock models through uniaxial compression tests. The digital speckle correlation method (DSCM and acoustic emission (AE techniques were applied to record and analyze the information of deformation and failure processes. Test results show the following: the bearing capacity of layer-crack specimen decreases compared with intact specimen, but their failure modes are similar, which are the splitting failure accompanied with local shear failure; the nonuniform deformation phenomenon begins to appear at the elastic deformation stage for layer-crack specimens; the AE behavior of intact specimens consists of three stages, that is, active stage, quiet stage, and major active stage, but for layer-crack specimens, it is characteristic by three peaks without quiet stage. In addition, as the fissure number of layer-crack specimens increases, the bearing capacity of specimens decreases, the appearing time of nonuniform deformation phenomenon in the specimen surface decreases, the AE events are denser and denser in each peak stage, and the risk of dynamic instability of layer-crack structure increases. At last, the failure mechanism of layer-crack structure and the related mitigation advices were discussed based on the test results. In general, the novelty is that this paper focuses on the failure mechanism of layer-crack structure directly.

Phase stability in thermally-aged CASS CF8 under heavy ion irradiation

Energy Technology Data Exchange (ETDEWEB)

Li, Meimei, E-mail: mli@anl.gov [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States); Miller, Michael K. [Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831 (United States); Chen, Wei-Ying [Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439 (United States)

2015-07-15

Highlights: • Thermally-aged CF8 was irradiated with 1 MeV Kr ions at 400 °C. • Atom probe tomography revealed a strong dose dependence of G-phase precipitates. • Phase separation of α and α′ in ferrite was reduced after irradiation. - Abstract: The stability of the microstructure of a cast austenitic stainless steel (CASS), before and after heavy ion irradiation, was investigated by atom probe tomography (APT). A CF8 ferrite–austenite duplex alloy was thermally aged at 400 °C for 10,000 h. After this treatment, APT revealed nanometer-sized G-phase precipitates and Fe-rich α and Cr-enriched α′ phase separated regions in the ferrite. The thermally-aged CF8 specimen was irradiated with 1 MeV Kr ions to a fluence of 1.88 × 10{sup 19} ions/m{sup 2} at 400 °C. After irradiation, APT analysis revealed a strong spatial/dose dependence of the G-phase precipitates and the α–α′ spinodal decomposition in the ferrite. For the G-phase precipitates, the number density increased and the mean size decreased with increasing dose, and the particle size distribution changed considerably under irradiation. The inverse coarsening process can be described by recoil resolution. The amplitude of the α–α′ spinodal decomposition in the ferrite was apparently reduced after heavy ion irradiation.

Cf-252 neutron brachytherapy: an advance for bulky localized cancer therapy

International Nuclear Information System (INIS)

Maruyama, Y.

1984-01-01

The physical and radiobiogical basis as well as the rationale for neutron brachytherapy, using Cf-252, in human cancer therapy is reviewed. Cf-252 brachytherapy represents an economical and effective form of neutron radiotherapy that is readily and safely applied clinically. It can be used anywhere in the world without unusual personnel, equipment or facilities, or prohibitive expenses or maintenance costs. Used on bulky head and neck, thoracic, abdominal, pelvic, brain and appendage cancers, it overcomes hypoxic radioresistance and produces remarkable rates of tumor clearance. It is easily combined with photon radiotherapy and in proper schedules and doses, it can control advanced but still localized regional cancers to produce tumor cure. It will clear the local manifestations of recurrent or metastatic tumors or advanced stages of primary tumors and therefore in conjunction with other adjuvant therapies offers much more effective tumor control and palliation than present conventional therapy. (Auth.)

Surface treatment of diamond-like carbon films by reactive Ar/CF{sub 4} high-power pulsed magnetron sputtering plasmas

Energy Technology Data Exchange (ETDEWEB)

Kimura, Takashi, E-mail: t-kimura@nitech.ac.jp [Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Nishimura, Ryotaro [Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Azuma, Kingo [Department of Electrical Engineering and Computer Sciences, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan); Nakao, Setsuo; Sonoda, Tsutomu; Kusumori, Takeshi; Ozaki, Kimihiro [National Institute of Advanced Industrial Science and Technology (AIST) - Chubu, 2266-98 Anagahora, Moriyama, Nagoya 463-8560 (Japan)

2015-12-15

Surface modification of diamond-like carbon films deposited by a high-power pulsed magnetron sputtering (HPPMS) of Ar was carried out by a HPPMS of Ar/CF{sub 4} mixture, changing a CF{sub 4} fraction from 2.5% to 20%. The hardness of the modified films markedly decreased from about 13 to about 3.5 GPa with increasing CF{sub 4} fraction, whereas the water contact angle of the modified films increased from 68° to 109° owing to the increase in the CF{sub x} content on the film surface. C 1s spectra in X-ray photoelectron spectroscopy indicated that a graphitic structure of modified films was formed at CF{sub 4} fractions less than 5%, above which the modified films possessed a polymer-like structure. Influence of treatment time on the properties of the modified films was also investigated in the range of treatment time from 5 to 30 min. The properties of the modified films did not depend on the treatment time in the range of treatment time longer than 10 min, whereas the water contact angle was not sensitive to the treatment time at any treatment time.

Results from impression packer technique for location of fissures in boreholes in white chalk, Mors, Denmark

International Nuclear Information System (INIS)

Andersen, L.J.; Byrne, L.; Frykman, P.

1981-01-01

In connection with site investigations to evaluate the possibility of geological disposal of radioactive waste in a salt dome a Hydrogeological Programme was carried out. A number of bore holes were drilled to depths of 550 m. Geological and hydrogeological investigations were performed. The hydrogeological tests were carried out as packer tests, bottomhole tests using one packer, or straddle-packer test using two packers. In connection with these tests a rubber sleeve was installed over the packer and sidewall impressions of the hole were taken. Irregularities such as faults and fissures and possibly solution features were localized. The paper describes the method, procedure, equipment and the results achieved

Validation of the Serbian adaptation of the Trait Emotional Intelligence Questionnaire-Child Form (TEIQue-CF

Directory of Open Access Journals (Sweden)

Banjac Sonja

2016-01-01

Full Text Available This study investigated trait EI in childhood in a Serbian population by validating a Serbian adaptation of the Trait Emotional Intelligence Questionnaire - Child Form (TEIQue-CF. All 606 participants (Mage = 10.33, SD = 1.55 completed the TEIQue-CF, the Reading the Mind in the Eyes Test (revised version, and the Guess Who peer assessment. Data on academic achievement and truancy were also obtained. The Serbian TEIQue-CF demonstrated robust psychometric properties with satisfactory internal consistencies and extensive evidence of validity in relation to criteria such as emotion recognition, academic grades, truancy rates, and peer ratings. Factor analyses suggested a two-factor solution for the total sample, but a unifactorial structure for the two groups of younger children aged 8 to 9 and 10 to 11. Overall, the results corroborate the validity of the Serbian adaptation and the theoretical and practical importance of the construct of trait EI in children. [Projekat Ministarstva nauke Republike Srbije, br. 179018

CF3+ fragmentation by electron impact ionization of perfluoro-propyl-vinyl-ethers, C5F10O, in gas phase

Science.gov (United States)

Kondo, Yusuke; Ishikawa, Kenji; Hayashi, Toshio; Miyawaki, Yudai; Takeda, Keigo; Kondo, Hiroki; Sekine, Makoto; Hori, Masaru

2015-04-01

The gas phase fragmentations of perfluoro-propyl-vinyl ether (PPVE, C5F10O) are studied experimentally. Dominant fragmentations of PPVE are found to be the result of a dissociative ionization reaction, i.e., CF3+ via direct bond cleavage, and C2F3O- and C3F7O- via electron attachment. Regardless of the appearance energy of around 14.5 eV for the dissociative ionization of CF3+, the observed ion efficiency for the CF3+ ion was extremely large the order of 10-20 cm-2, compared with only 10-21 cm-2 for the other channels. PPVE characteristically generated CF3+ as the largest abundant ion are advantageous for use of feedstock gases in plasma etching processes.

Etching of anode wire deposits with CF4/isobutane (80:20) avalanches

International Nuclear Information System (INIS)

Openshaw, R.; Henderson, R.S.; Faszer, W.; Salomon, M.

1990-11-01

An ionization exposure of 0.5 coulombs per cm of wire in a gas mixture of CF 4 /isobutane (80:20) is shown to reverse anode wire damage in single-wire chambers. Several chambers aged in argon/ethane (50:50) and argon/ethane/ethanol (50:50:0.2) and having pulse height reductions of 25-30% have recovered pulse heights and currents to greater than 98% of their initial values. Inspection of the anode wires indicates that the thick deposits caused by the exposure in argon/ethane have been removed. Auger electron spectroscopy reveals only a thin residual layer containing primarily carbon and oxygen. This etching ability of CF 4 /isobutane (80:20) avalanches may explain the extremely good ageing characteristics previously reported for this mixture. (Author) (13 refs., 3 tabs., 11 figs.)

Solution Structure of an Antifreeze Protein CfAFP-501 from Choristoneura fumiferana

International Nuclear Information System (INIS)

Li Congmin; Guo Xianrong; Jia Zongchao; Xia Bin; Jin Changwen

2005-01-01

Antifreeze proteins (AFPs) are widely employed by various organisms as part of their overwintering survival strategy. AFPs have the unique ability to suppress the freezing point of aqueous solution and inhibit ice recrystallization through binding to the ice seed crystals and restricting their growth. The solution structure of CfAFP-501 from spruce budworm has been determined by NMR spectroscopy. Our result demonstrates that CfAFP-501 retains its rigid and highly regular structure in solution. Overall, the solution structure is similar to the crystal structure except the N- and C-terminal regions. NMR spin-relaxation experiments further indicate the overall rigidity of the protein and identify a collection of residues with greater flexibilities. Furthermore, Pro91 shows a cis conformation in solution instead of the trans conformation determined in the crystal structure

CF-Pursuit: A Pursuit Method with a Clothoid Fitting and a Fuzzy Controller for Autonomous Vehicles

Directory of Open Access Journals (Sweden)

Yunxiao Shan

2015-09-01

Full Text Available Simple and efficient geometric controllers, like Pure-Pursuit, have been widely used in various types of autonomous vehicles to solve tracking problems. In this paper, we have developed a new pursuit method, named CF-Pursuit, which has been based on Pure-Pursuit but with certain differences. In CF-Pursuit, in order to reduce fitting errors, we used a clothoid C1 curve to replace the circle employed in Pure-Pursuit. This improvement to the fitting method helps the Pursuit method to decrease tracking errors. As regards the selection of look-ahead distance, we employed a fuzzy system to directly consider the path's curvature. There are three input variables in this fuzzy system, 6mcurvature, 9mcurvature and 12mcurvature, calculated from the clothoid fit with the current position and the goal position on the defined path. A Sugeno fuzzy model was adapted to output a reasonable look-ahead distance using the experiences of human drivers as well as our own tests. Compared with some other geometric controllers, CF-Pursuit performs better in robustness, cross track errors and stability. The results from field tests have proven the CF-Pursuit is a practical and efficient geometric method for the path tracking problems of autonomous vehicles.

Etching of Copper Coated Mylar Tubes With CF-4 Gas

International Nuclear Information System (INIS)

Ecklund, Karl M.; Hartman, Keith W.; Hebert, Michael J.; Wojcicki, Stanley G.

1996-01-01

Using 5 mm diameter copper coated mylar straw tubes at a potential of 2.30 KV relative to a concentric 20 (mu)m diameter gold-plated tungsten anode, it has been observed that with very low flow rates of CF4-based gases the conductive copper cathode material may be removed entirely from the mylar surface

Ternary particle yields in 249Cf(nth,f)

International Nuclear Information System (INIS)

Tsekhanovich, I.; Bueyuekmumcu, Z.; Davi, M.; Denschlag, H.O.; Goennenwein, F.; Boulyga, S.F.

2003-01-01

An experiment measuring ternary particle yields in 249 Cf(n th ,f) was carried out at the high flux reactor of the Institut Laue-Langevin using the Lohengrin recoil mass separator. Parameters of energy distributions were determined for 27 ternary particles up to 30 Mg and their yields were calculated. The yields of 17 further ternary particles were estimated on the basis of the systematics developed. The heaviest particles observed in the experiment are 37 Si and 37 S; their possible origin is discussed

Rotational relaxation of CF+(X1Σ) in collision with He(1S)

Science.gov (United States)

Denis-Alpizar, O.; Inostroza, N.; Castro Palacio, J. C.

2018-01-01

The carbon monofluoride cation (CF+) has been detected recently in Galactic and extragalactic regions. Therefore, excitation rate coefficients of this molecule in collision with He and H2 are necessary for a correct interpretation of the astronomical observations. The main goal of this work is to study the collision of CF+ with He in full dimensionality at the close-coupling level and to report a large set of rotational rate coefficients. New ab initio interaction energies at the CCSD(T)/aug-cc-pv5z level of theory were computed, and a three-dimensional potential energy surface was represented using a reproducing kernel Hilbert space. Close-coupling scattering calculations were performed at collisional energies up to 1600 cm-1 in the ground vibrational state. The vibrational quenching cross-sections were found to be at least three orders of magnitude lower than the pure rotational cross-sections. Also, the collisional rate coefficients were reported for the lowest 20 rotational states of CF+ and an even propensity rule was found to be in action only for j > 4. Finally, the hyperfine rate coefficients were explored. These data can be useful for the determination of the interstellar conditions where this molecule has been detected.

Monitoring of toxic elements present in sludge of industrial waste using CF-LIBS.

Science.gov (United States)

Kumar, Rohit; Rai, Awadhesh K; Alamelu, Devanathan; Aggarwal, Suresh K

2013-01-01

Industrial waste is one of the main causes of environmental pollution. Laser-induced breakdown spectroscopy (LIBS) was applied to detect the toxic metals in the sludge of industrial waste water. Sludge on filter paper was obtained after filtering the collected waste water samples from different sections of a water treatment plant situated in an industrial area of Kanpur City. The LIBS spectra of the sludge samples were recorded in the spectral range of 200 to 500 nm by focusing the laser light on sludge. Calibration-free laser-induced breakdown spectroscopy (CF-LIBS) technique was used for the quantitative measurement of toxic elements such as Cr and Pb present in the sample. We also used the traditional calibration curve approach to quantify these elements. The results obtained from CF-LIBS are in good agreement with the results from the calibration curve approach. Thus, our results demonstrate that CF-LIBS is an appropriate technique for quantitative analysis where reference/standard samples are not available to make the calibration curve. The results of the present experiment are alarming to the people living nearby areas of industrial activities, as the concentrations of toxic elements are quite high compared to the admissible limits of these substances.

Atmospheric chemistry of trans-CF3CH = CHCl: Kinetics of the gas-phase reactions with Cl atoms, OH radicals, and O-3

DEFF Research Database (Denmark)

Andersen, Mads Peter Sulbæk; Nilsson, E. J. K.; Nielsen, O. J.

2008-01-01

spectrum of t-CF3CH = CHCl is reported. The atmospheric lifetime of t-CF3CH = CHCl is determined by reaction with OH radicals and is approximately 26 days. The global warming potential of t-CF3CH = CHCl is approximately 7 for a 100-year time horizon. (C) 2008 Elsevier B.V. All rights reserved....

Physical and biological dosimetries of Cf-252 radiation

International Nuclear Information System (INIS)

Yamashita, Hisao; Wada, Tadashi; Dokiya, Takushi; Hashimoto, Shozo

1986-01-01

Recently Cf-252 sources containing 300 μg have become available in a size identical to 1 Ci of Cs-137 and with the use of remotely controlled afterloading apparatus, safe therapy with little exposure to the therapist is now possible. Radiation leakage from the Cf-252 apparatus and from the treatment room was measured with REM-meter and it was possible to reduce the leakage from the treatment room to less than 1 mrem/h (gamma rays) and 0.5 mrem/h (neutrons). Measurement of fast neutrons was made with a twin chamber composed of a tissue equivalent ionization chamber and a carbon ionization chamber. The neutron dose in air and the absorbed dose in tissue equivalent water tank were measured, which showed that in air, neutrons were 70% and photons were 30% of dose. In water, greater distances from the source, neutrons attenuate and gamma rays increase in dose. The results of studies on the skin reaction of mice and sperm cleavage delay time of sea urchins indicated that the RBE ranges from 1.5 to 3.0 using the high dose rate system. Neutrons are remarkably affected by a time factor. With the use of high dose rate sources, the dose rate has become higher, but the overall time has been extended through dose fractionation and it was considered advisable to employ an RBE of 3-4 in these studies. (Auth.)

Early Jurassic allotherians from South Wales (United Kingdom

Directory of Open Access Journals (Sweden)

W. A. Clemens

2007-02-01

Full Text Available Fossils from two fissure fillings in Pant Quarry (designated Pant 4 and Pant 5, South Wales, United Kingdom, probably of Early Jurassic age document a taxonomically diverse vertebrate fauna, the Morganucodon-sphenodont fauna, composed of several kinds of reptiles, non-mammalian synapsids, and mammals. Six isolated molariform teeth from Pant 4 and 5 fissures clearly record the presence of Thomasia (Mammalia, Allotheria, Haramiyidae, a genus previously known only from purported Late Triassic faunas of southwestern England, France, Belgium, Luxemburg, Germany, and Switzerland. Small morphological differences from teeth in the larger English and continental European samples warrant identification of the Welsh material as Thomasia cf. moorei. The highly derived morphology of an isolated molariform tooth from Pant 5 fissure indicates the presence of another, possibly allotherian, taxon. Fossilien aus zwei wahrscheinlich unterjurassischen Spaltenfüllungen (Pant 4 und Pant 5 im Steinbruch Pant in Süd-Wales dokumentieren eine taxonomisch diverse Wirbeltierfauna. Diese Morganucodon-Sphenodontiden-Fauna besteht aus verschiedenen Formen von Reptilien, Synapsiden und Säugetieren. Sechs isolierte molariforme Zähne aus den Spaltenfüllungen Pant 4 und Pant 5 belegen eindeutig das Vorkommen von Thomasia (Mammalia, Allotheria, Haramiyidae, einer bisher nur aus vermutlich obertriassischen Faunen Südwest-Englands, Frankreichs, Belgiens, Luxemburgs, Deutschlands und der Schweiz bekannten Gattung. Geringe morphologische Unterschiede zu dem umfangreicheren Material aus England und Kontinental-Europa sprechen für die Identifikation des neuen Materials als Thomasia cf. moorei. Die stark abgeleitete Morphologie eines isolierten molariformen Zahnes aus der Spalte Pant 5 belegt das Vorkommen eines anderen Taxons, das möglicherweise auch den Allotheria zuzuordnen ist. doi:10.1002/mmng.200600018

Automatic classification of pulmonary peri-fissural nodules in computed tomography using an ensemble of 2D views and a convolutional neural network out-of-the-box

NARCIS (Netherlands)

Ciompi, Francesco; de Hoop, Bartjan; van Riel, Sarah J.; Chung, Kaman; Scholten, Ernst Th.; Oudkerk, Matthijs; de Jong, Pim A.; Prokop, Mathias; van Ginneken, Bram

2015-01-01

In this paper, we tackle the problem of automatic classification of pulmonary peri-fissural nodules (PFNs). The classification problem is formulated as a machine learning approach, where detected nodule candidates are classified as PFNs or non-PFNs. Supervised learning is used, where a classifier is

A restructuring of the CF/EDF packages for the MIDAS computer code

International Nuclear Information System (INIS)

Park, S.H.; Kim, K.R.; Kim, D.H.

2004-01-01

The CF and EDF packages, which allow the user to define the functions of variables in a database and the usage of an external data file, have been restructured for the MIDAS computer code. MIDAS is being developed as an integrated severe accident analysis code with a user-friendly graphical user interface and a modernized data structure. To restructure the code, the data transferring methods of the current MELCOR code are modified and then partially adopted into the CF/EDF packages. The data structure of the current MELCOR code using FORTRAN77 has a difficulty in grasping the meaning of the variables as pointers are used to define their addresses. New features of FORTRAN90 make it possible to allocate the storage dynamically and to use the user-defined data type without pointers leading to an efficient memory treatment and an easy understanding of the code. Restructuring of the CF/EDF packages addressed in this paper includes a module development and subroutine modification. The verification has been done by comparing the results of the modified code with those of the existing code and the trends are almost the same to each other. Therefore the similar approach could be extended to the entire code package for code restructuring. It is expected that the code restructuring will accelerate the code's domestication thanks to a direct understanding of each variable and an easy implementation of the modified or newly developed models. (author)

Diffusion of Lithium Ions in Amorphous and Crystalline Poly(ethylene oxide)_3:LiCF_3SO_3 Polymer Electrolytes

International Nuclear Information System (INIS)

Xue, Sha; Liu, Yingdi; Li, Yaping; Teeters, Dale; Crunkleton, Daniel W.; Wang, Sanwu

2017-01-01

The PEO_3:LiCF_3SO_3 polymer electrolyte has attracted significant research due to high conductivity and enhanced stability in lithium polymer batteries. Most experimental studies have shown that amorphous PEO lithium salt electrolytes have higher conductivity than the crystalline ones. Other studies, however, have shown that crystalline PEO salt complexes can conduct ions. As a result, further theoretical investigations are warranted to help clarify the issue. In this work, we use density functional theory with the climbing image nudged elastic band method to investigate the atomic-scale mechanism of lithium ion transport in the polymer electrolytes. We also use density functional theory and ab initio molecular dynamics simulations to obtain the amorphous structure of PEO_3:LiCF_3SO_3. The diffusion pathways and activation energies of lithium ions in both crystalline and amorphous PEO_3:LiCF_3SO_3 are determined. In crystalline PEO_3:LiCF_3SO_3, the activation energy for the low-barrier diffusion pathway is approximately 1.0 eV. In the amorphous phase, the value is 0.6 eV. This result would support the experimental observation that amorphous PEO_3:LiCF_3SO_3 has higher ionic conductivity than the crystalline phase.

Evaluation of neutron nuclear data for 249Cf

International Nuclear Information System (INIS)

Zhou Delin; Yu Baosheng; Yuan Hanrong; Liu Tong; Zhang Jin; Su Zongdi; Yan Shiwei; Wang Cuilan; Zhang Jingshang

1992-01-01

A complete set of neutron nuclear data from 10 -5 eV to 20 MeV in ENDF/B-6 format has been evaluated for 249 Cf based on measured data, systematics predications and model theory calculations. The evaluated quantities are the total, elastic and inelastic scattering, fission, capture, (n,2n), (n,3n) reaction cross sections, the resolved and unresolved resonance parameters, the angular and energy distributions of emitted neutrons and the average number of neutrons emitted per fission. The numerical data are available in ENDF/B-6 format

Frequency spectrum analysis of 252Cf neutron source based on LabVIEW

International Nuclear Information System (INIS)

Mi Deling; Li Pengcheng

2011-01-01

The frequency spectrum analysis of 252 Cf Neutron source is an extremely important method in nuclear stochastic signal processing. Focused on the special '0' and '1' structure of neutron pulse series, this paper proposes a fast-correlation algorithm to improve the computational rate of the spectrum analysis system. And the multi-core processor technology is employed as well as multi-threaded programming techniques of LabVIEW to construct frequency spectrum analysis system of 252 Cf neutron source based on LabVIEW. It not only obtains the auto-correlation and cross correlation results, but also auto-power spectrum,cross-power spectrum and ratio of spectral density. The results show that: analysis tools based on LabVIEW improve the fast auto-correlation and cross correlation code operating efficiency about by 25% to 35%, also verify the feasibility of using LabVIEW for spectrum analysis. (authors)

A new facility for non-destructive assay using a 252Cf source

International Nuclear Information System (INIS)

Stevanato, L.; Caldogno, M.; Dima, R.; Fabris, D.; Hao, Xin; Lunardon, M.; Moretto, S.; Nebbia, G.; Pesente, S.; Pino, F.; Sajo-Bohus, L.; Viesti, G.

2013-01-01

A new laboratory facility for non-destructive analysis (NDA) using a time-tagged 252 Cf source is presented. The system is designed to analyze samples having maximum size of about 20×25 cm 2 , the material recognition being obtained by measuring simultaneously total and energy dependent transmission of neutrons and gamma rays. The equipment technical characteristics and performances of the NDA system are presented, exploring also limits due to the sample thickness. Some recent applications in the field of cultural heritage are presented. - Highlights: ► Tagged 252 Cf source setup. ► Material recognition and sample imaging with measurements of gamma ray and neutron transmission. ► Material identification via energy dependent neutron and gamma ray transmission measurements. ► Identification of layered material. ► Effects due to the sample thickness on the above identification techniques

Effect of fiber-matrix adhesion on the creep behavior of CF/PPS composites: temperature and physical aging characterization

Science.gov (United States)

Motta Dias, M. H.; Jansen, K. M. B.; Luinge, J. W.; Bersee, H. E. N.; Benedictus, R.

2016-06-01

The influence of fiber-matrix adhesion on the linear viscoelastic creep behavior of `as received' and `surface modified' carbon fibers (AR-CF and SM-CF, respectively) reinforced polyphenylene sulfide (PPS) composite materials was investigated. Short-term tensile creep tests were performed on ±45° specimens under six different isothermal conditions, 40, 50, 60, 65, 70 and 75 °C. Physical aging effects were evaluated on both systems using the short-term test method established by Struik. The results showed that the shapes of the curves were affected neither by physical aging nor by the test temperature, allowing then superposition to be made. A unified model was proposed with a single physical aging and temperature-dependent shift factor, a_{T,te}. It was suggested that the surface treatment carried out in SM-CF/PPS had two major effects on the creep response of CF/PPS composites at a reference temperature of 40 °C: a lowering of the initial compliance of about 25 % and a slowing down of the creep response of about 1.1 decade.

Aerobic and heterotrophic nitrogen removal by Enterobacter cloacae CF-S27 with efficient utilization of hydroxylamine.

Science.gov (United States)

Padhi, Soumesh Kumar; Tripathy, Swetaleena; Mohanty, Sriprakash; Maiti, Nikhil Kumar

2017-05-01

Heterotrophic bacterium, Enterobacter cloacae CF-S27 exhibited simultaneous nitrification and aerobic denitrification in presence of high concentration of hydroxylamine. With the initial nitrogen concentration of 100mgL -1 h -1 , ammonium, nitrate and nitrite removal efficiencies were 81%, 99.9% and 92.8%, while the corresponding maximum removal rates reached as high as 11.6, 15.1 and 11.2mgL -1 h -1 respectively. Quantitative amplification by real time PCR and enzyme assay demonstrated that hydroxylamine reductase gene (hao) is actively involved in hetrotrophic nitrification and aerobic denitrification process of Enterobacter cloacae CF-S27. PCR primers were designed targeting amplification of hao gene from diversified environmental soil DNA. The strain Enterobacter cloacae CF-S27 significantly maintained the undetectable amount of dissolved nitrogen throughout 60days of zero water exchange fish culture experiment in domestic wastewater. Copyright © 2017 Elsevier Ltd. All rights reserved.

INAA using 252Cf neutron source at University of Pune

International Nuclear Information System (INIS)

Rajurkar, N.S.

2006-01-01

The review presents the work done over last two decades on Instrumental Neutron Activation Analysis (INAA) by our research group at University of Pune using 252 Cf spontaneous fission neutron source. The technique has been applied in different fields viz. numismatics, industry, agriculture, ayurveda, environmental and health sciences and diffusion studies. A brief discussion of the work is presented in this article. (author)

Growth retardation and reduced growth hormone secretion in cystic fibrosis. Clinical observations from three CF centers.

Science.gov (United States)

Ciro, D'Orazio; Padoan, Rita; Blau, Hannah; Marostica, Anna; Fuoti, Maurizio; Volpi, Sonia; Pilotta, Alba; Meyerovitch, Joseph; Sher, Daniel; Assael, Baroukh M

2013-03-01

Growth delay in cystic fibrosis is frequent and is usually the result of several interacting causes. It most often derives from severe respiratory impairment and severe malabsorption. There are however patients whose clinical condition is not severe enough to be held accountable for this phenomenon. We aimed at describing patients who showed growth delay, who were not affected by severe pulmonary disease or malabsorption and who, when tested, showed a reduced GH secretion after stimulation with conventional agents. We noticed a disproportionately large prevalence of growth hormone (GH) release deficit (GHRD) in pediatric cystic fibrosis (CF) patients. We examined all patients under our care in the period 2006-11, who were older than 5 and younger than 16 years old. We focussed on those who fell below the 3rd height percentile, or whose growth during the previous 18 months faltered by >2SD, and who did not present clinical conditions that could reasonably explain their failure to thrive. These patients were subjected to standard GH provocative tests. Out of 285 who matched the age criterion, 33 patients also matched the height percentile criterion. While 15/33 suffered clinical conditions that could reasonably explain their failure to thrive, 18/33 underwent GH release provocative tests and 12/18 showed a release deficit. We conclude that impaired GH secretion is more frequent among CF patients compared to the prevalence of GH deficiency in the general population and that GH release impairment may be an independent cause of growth delay in CF. Our findings are in agreement with recent studies that have described low GH levels in CF piglets and in neonates with CF [1]. Copyright © 2012 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

A pilot trial on safety and efficacy of erythrocyte-mediated steroid treatment in CF patients

Directory of Open Access Journals (Sweden)

Bella S

2006-05-01

Full Text Available Abstract Background Chronic neutrophil inflammation of the respiratory tract tissues plays a key role in the pathogenesis and in prognosis of cystic fibrosis (CF. It is evident that an anti-inflammatory therapy represents an important step in the treatment of CF patients. Corticosteroids and ibuprofen have been proven to slow down the impairment of the pulmonary function in CF patients but their use is limited by the frequency of adverse events. A novel strategy for delivering low doses of steroids for long periods through the infusion of autologous erythrocytes loaded with dexamethasone has been recently set up. A recent study suggested the feasibility of therapy with low doses of corticosteroids delivered through engineered erythrocytes in CF patients. This study presents a further analysis of safety and efficacy of this therapy. Methods The treatment group was not randomised and the assignment was based on the patient's consent. Patients entered the study if they had a forced expiratory volume in 1 second (FEV1 Results Nine patients in the experimental group received the treatment once a month for a period of 24 month. Patients did not develop diabetes, cataract, or hypertension, or other typical side effects of steroid treatment during the follow up period. There was a constant improvement of FEV1 in patients undergoing the experimental treatment compared to a gradual decrease of the same parameter in the standard therapy group (P = 0.04. The average of clinic and radiological indexes did not vary. The number of infective relapses that have required antibiotic intravenous therapy was not different in the two groups, although the average of these episodes was slightly higher in the experimental therapy group. Conclusion Intraerythrocyte corticosteroid treatment may stabilize the respiratory function in CF patients but is often considered too invasive by patients. The results obtained by our study may help planning an experimental, controlled

Atmospheric Chemistry of cis-CF3CH=CHF: Kinetics of reactions with OH radicals and O3 and products of OH radical initiated oxidation

DEFF Research Database (Denmark)

Nilsson, Elna Johanna Kristina; Nielsen, Ole John; Johnson, Matthew Stanley

2009-01-01

Long path length FTIR-smog chamber techniques were used to measure k(OH + cis-CF3CH@CHF) = (1.20 ± 0.14) 1012 and k(O3 + cis-CF3CH@CHF) = (1.65 ± 0.16) 1021 cm3 molecule 1 s1 in 700 Torr of N2/O2 diluent at 296 K. The OH initiated oxidation of cis-CF3CH@CHF gives CF3CHO and HCOF in molar yields w...

The application of n-γ discrimination in 252Cf spontaneous neutron TOF spectra measurement

International Nuclear Information System (INIS)

Zhou Haojun; Zhang Yi; Li Jiansheng; Jin Yu; Wang Jie; Li Chunyuan

2004-01-01

The BC501 scintillator is used as a fast neutron detector. The effect that the pulse rise time method was used to discriminate γ from 252 Cf spontaneous neutron TOF spectra is studied in the experiment. A pulse rise time separation spectra of γ and 252 Cf spontaneous neuron upon 1 MeV is obtained, the n-γ separation function reaches to 4.6. When the result of pulse rise time separation coincides with the time-of-flight spectra in which the neutron energy is upon 0.5 MeV, 0.8 MeV and 1.0 MeV, comparing with the anticoincidence, γ was eliminated 99.90% at least. (authors)

Atmospheric chemistry of CF3COOH. Kinetics of the reaction with OH radicals

DEFF Research Database (Denmark)

Møgelberg, T.E.; Nielsen, O.J.; Sehested, J.

1994-01-01

Two different experimental techniques were used to study the kinetics of the reaction of OH radicals with trifluoroacetic acid, CF3COOH. Using a pulse radiolysis absolute rate technique, rate constants at 315 and 348 K were determined to be (1.6 +/- 0.4) x 10(-13) and (1.5 +/- 0.2) x 10(-13) cm3...... molecule-1 s-1, respectively. Using a long path-length FTIR relative rate technique a rate constant of (1.7 +/- 0.5) x 10(-13) cm3 molecule-1 s-1 was obtained at 296 K. In the atmosphere, reaction with OH radicals in the gas phase is estimated to account for 10%-20% of the loss of CF3COOH. The major fate...

Knowledge, value, opinion and practice about usage of pit and fissure sealant among dental professionals in Chennai, Tamil Nadu, India.

Science.gov (United States)

Nagappan, N; Dhamodhar, M Dinesh; Nithin, M G; Kumar, E Senthil

2015-12-01

A study was aimed to assess the knowledge, value, opinion, and practice regarding the use of dental sealants among private dental practitioners in Chennai, Tamil Nadu, India. A self-administrated questionnaire were distributed to 192 private dental practitioners in Chennai, Tamil Nadu, India by using simple random sampling. A convenience sampling technique was employed. The questionnaire consisted of 28 items, which included information about knowledge, value, opinion, and practice regarding dental sealants. The questionnaire was obtained from the study by San Martin et al. 2013 and Kailash Asawa et al. 2014. Frequency distribution was tabulated. For frequency distribution strongly, strongly agree, and agree were combined as "agree" and strongly disagree and disagree were combined as "disagree." There were no changes in "neutral." Among the 196 study subjects 56.2% were males and 43.8% were females with their clinical experience of 52.1% for 15 years. The mean scores for knowledge, value, opinion, and practice were 41.8 ± 3.7, 18.7 ± 2.8, 18.1 ± 1.4, and 12.9 ± 2.3, respectively. The results suggest that dental practitioners had satisfactory knowledge about pit and fissure sealant and had neutral attitudes about sealants being effective. Dental practitioners adequately used the pit and fissure sealants but they did not follow the standardized procedures and specific guidelines.

Calculated neutron air kerma strength conversion factors for a generically encapsulated Cf-252 brachytherapy source

CERN Document Server

Rivard, M J; D'Errico, F; Tsai, J S; Ulin, K; Engler, M J

2002-01-01

The sup 2 sup 5 sup 2 Cf neutron air kerma strength conversion factor (S sub K sub N /m sub C sub f) is a parameter needed to convert the radionuclide mass (mu g) provided by Oak Ridge National Laboratory into neutron air kerma strength required by modern clinical brachytherapy dosimetry formalisms indicated by Task Group No. 43 of the American Association of Physicists in Medicine (AAPM). The impact of currently used or proposed encapsulating materials for sup 2 sup 5 sup 2 Cf brachytherapy sources (Pt/Ir-10%, 316L stainless steel, nitinol, and Zircaloy-2) on S sub K sub N /m sub C sub f was calculated and results were fit to linear equations. Only for substantial encapsulation thicknesses, did S sub K sub N /m sub C sub f decrease, while the impact of source encapsulation composition is increasingly negligible as Z increases. These findings are explained on the basis of the non-relativistic kinematics governing the majority of sup 2 sup 5 sup 2 Cf neutron interactions. Neutron kerma and energy spectra resul...

A 252Cf based nondestructive assay system for fissile material

International Nuclear Information System (INIS)

Menlove, H.O.; Crane, T.W.

1978-01-01

A modulated 252 Cf source assay system 'Shuffler' based on fast-or-thermal-neutron interrogation combined with delayed-neutron counting has been developed for the assay of fissile material. The 252 Cf neutron source is repetitively transferred from the interrogation position to a shielded position while the delayed neutrons are counted in a high efficiency 3 He neutron well-counter. For samples containing plutonium, this well-counter is also used in the passive coincidence mode to assay the effective 240 Pu content. The design of an optimized neutron tailoring assembly for fast-neutron interrogation using a Monte Carlo Neutron Computer Code is described. The Shuffler system has been applied to the assay of fuel pellets, inventory samples, irradiated fuel and plutonium mixed-oxide fuel. The system can assay samples with fissile contents from a few milligrams up to several kilograms using thermal-neutron interrogation for the low mass samples and fast-neutron interrogation for the high mass samples. Samples containing 235 U- 238 U, or 233 U-Th, or UO 2 -PuO 2 fuel mixtures have been assayed with the Shuffler system. (Auth.)

Cloning and characterization of ATP synthase CF1 α gene from ...

African Journals Online (AJOL)

ATP synthase CF1 α subunit protein is a key enzyme for energy metabolism in plant kingdom, and plays an important role in multiple cell processes. In this study, the complete atpA gene (accession no. JN247444) was cloned from sweet potato (Ipomoea batatas L. Lam) by reverse transcriptasepolymerase chain reaction ...

Prompt neutron energy spectrum for the spontaneous fission of Cf-252

International Nuclear Information System (INIS)

Blinov, M.V.; Boykov, G.S.; Vitenko, V.A.

1985-06-01

The prompt neutron spectrum for the spontaneous fission of Cf-252 has been measured in 0.01-10 MeV region by the time-of-flight technique using a fast ionization chamber with U-235 layers as the neutron detector. Numerical data for the spectrum are presented, with an error file. (author)

Procedural pain in children with Cystic Fibrosis: an international survey on the methods used by CF centres to prevent and reduce it

DEFF Research Database (Denmark)

Festini, Filippo; Bregnballe, Vibeke

2006-01-01

do to prevent pain and fear in CF children. A 14-item questionnaire in 5 languages was sent to 441 CFCs' email addresses worldwide and posted on the INSG-CF web site. It regarded the methods used by CF Centres to control pain and fear during invasive procedures (e.g.: blood drawing, vein cannulation......Procedural pain is an additional burden for children with CE If not adequately prevented and treated procedural pain may result in anxiety and fear bound to the visits at the CF Centre (CFC) and it may affect patients' future compliance to treatments. Aim: To collect data on what CFCs in the world......, throat swab). Completed questionnaires were sent back by 50 CFCs from 12 countries (UK, USA, Canada, New Zealand, Israel, Italy, Belgium, The Netherlands, Sweden, Finland, France, Denmark) which take care of 4577 CF children overall. Results: 46% of CFCs collaborate with a local Pain Therapy Unit...

The Effects of Lithium Triflate (LiCF3SO3) on the PMMA-based Solid Polymer Electrolytes

International Nuclear Information System (INIS)

Chew, K. W.; Chen, S. S.; Pang, W. L.; Tan, C. G.; Osman, Z.

2010-01-01

The effects of Lithium triflate salt (LiCF 3 SO 3 ), on the poly (methyl methacrylate)(PMMA)-based solid polymer electrolytes plasticized with propylene carbonate (PC) solvated in Tetrahydrofuran (THF) have been studied through a.c impedance spectroscopy and infrared spectroscopy. Lithium triflate was incorporated into the predetermined PMMA/PC system that has the highest value of ionic conductivity. In current investigations, four combination systems: Pure PMMA, (PMMA+PC) systems, (PMMA+LiCF 3 SO 3 ) and (PMMA+PC+LiCF 3 SO 3 ) systems were prepared using the solution cast method. Solutions were stirred for numerous hours to obtain a homogenous solution before it is poured into the petri dishes under ambient temperature to form the solid electrolyte thin film. The films were then removed from petri discs and transferred into the dessicator for further drying prior to the different tests. From the characterization done through the a.c impedance spectroscopy, the highest room temperature ionic conductivity in the pure PMMA sample, (PMMA+PC) system and (PMMA+LiCF 3 SO 3 ) system is 2.83x10 -12 Scm -1 , 4.39x10 -11 Scm -1 and 3.93x10 -6 Scm -1 respectively. The conductivity for (PMMA+PC+LiCF 3 SO 3 ) system was obtained with the 30 wt% of lithium triflate, which is 2.48x10 -5 Scm -1 . Infrared spectroscopy shows that complexation occurred between the polymer and the plasticizer, and the polymer and plasticizer and salt. The interactions have been studied in the C=O band, C-O-C band and the O-CH 3 band.

Oxidation mechanisms of CF2Br2 and CH2Br2 induced by air nonthermal plasma.

Science.gov (United States)

Schiorlin, Milko; Marotta, Ester; Dal Molin, Marta; Paradisi, Cristina

2013-01-02

Oxidation mechanisms in air nonthermal plasma (NTP) at room temperature and atmospheric pressure were investigated in a corona reactor energized by +dc, -dc, or +pulsed high voltage.. The two bromomethanes CF(2)Br(2) and CH(2)Br(2) were chosen as model organic pollutants because of their very different reactivities with OH radicals. Thus, they served as useful mechanistic probes: they respond differently to the presence of humidity in the air and give different products. By FT-IR analysis of the postdischarge gas the following products were detected and quantified: CO(2) and CO in the case of CH(2)Br(2), CO(2) and F(2)C ═ O in the case of CF(2)Br(2). F(2)C ═ O is a long-lived oxidation intermediate due to its low reactivity with atmospheric radicals. It is however removed from the NTP processed gas by passage through a water scrubber resulting in hydrolysis to CO(2) and HF. Other noncarbon containing products of the discharge were also monitored by FT-IR analysis, including HNO(3) and N(2)O. Ozone, an important product of air NTP, was never detected in experiments with CF(2)Br(2) and CH(2)Br(2) because of the highly efficient ozone depleting cycles catalyzed by BrOx species formed from the bromomethanes. It is concluded that, regardless of the type of corona applied, CF(2)Br(2) reacts in air NTP via a common intermediate, the CF(2)Br radical. The possible reactions leading to this radical are discussed, including, for -dc activation, charge exchange with O(2)(-), a species detected by APCI mass spectrometry.

Theoretical study of the absorption spectrum and the thermochemistry of the CF{sub 3}OSO{sub 3} radical

Energy Technology Data Exchange (ETDEWEB)

Cobos, Carlos J.; Croce, Adela E. [Inst. de Investigaciones Fisicoquimicas Teoricas y Aplicadas (INIFTA), Univ. Nacional de La Plata, CCT La Plata-CONICET (Argentina)

2010-08-15

The UV-visible absorption spectrum of the recently reported CF{sub 3}OSO{sub 3} radical has been studied by using the time-dependent generalization of the density functional theory (TDDFT). For this a set of eleven hybrid functionals combined with the 6-311+G(3df) basis set were employed. The main features of the three experimental absorption bands of CF{sub 3}OSO{sub 3} recorded over the 220-530 nm range are well reproduced by the calculations. A dissociation enthalpy for the CF{sub 3}OSO{sub 3} bond of 19.1 kcal mol{sup -1} is predicted at the BAC-G3MP2//B3LYP/6-311+G(3df) level of theory. (orig.)

Fabrication of 50-mg 252Cf neutron sources for the FDA [Food and Drug Administration] activation analysis facility

International Nuclear Information System (INIS)

Bigelow, J.E.; Cagle, E.B.; Knauer, J.B.

1987-01-01

The Transuranium Processing Plant (TPP) at ORNL has been requested by the Food and Drug Administration (FDA) to furnish 200 mg of 252 Cf for use in their new activation analysis facility. This paper discusses the procedure to be employed in fabricating the californium into four neutron sources, each containing a nominal 50-mg of 252 Cf. The ORNL Model LSD (Large, Stainless steel, Doubly encapsulated) neutron source consists of a 6.33-mm-diam aluminum pellet doubly encapsulated in Type 304L stainless steel. The pellet is comprised of an aluminum tube holding Cf 2 O 2 SO 4 microspheres confined by pressed aluminum powder. The microspheres are prepared in a separate vessel and then transferred into the specially designed aluminum tube prior to pressing

Design of a setup for {sup 252}Cf neutron source for storage and analysis purpose

Energy Technology Data Exchange (ETDEWEB)

Hei, Daqian [Department of Nuclear Science and Engineering, College of Materials Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106 (China); Zhuang, Haocheng [Xi’an Middle School of Shanxi Province, Xi’an 710000 (China); Jia, Wenbao, E-mail: jiawenbao@163.com [Department of Nuclear Science and Engineering, College of Materials Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106 (China); Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education Institutions, Suzhou 215000 (China); Cheng, Can; Jiang, Zhou; Wang, Hongtao [Department of Nuclear Science and Engineering, College of Materials Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106 (China); Chen, Da [Department of Nuclear Science and Engineering, College of Materials Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 211106 (China); Collaborative Innovation Center of Radiation Medicine of Jiangsu Higher Education Institutions, Suzhou 215000 (China)

2016-11-01

{sup 252}Cf is a reliable isotopic neutron source and widely used in the prompt gamma ray neutron activation analysis (PGNAA) technique. A cylindrical barrel made by polymethyl methacrylate contained with the boric acid solution was designed for storage and application of a 5 μg {sup 252}Cf neutron source. The size of the setup was optimized with Monte Carlo code. The experiments were performed and the results showed the doses were reduced with the setup and less than the allowable limit. The intensity and collimating radius of the neutron beam could also be adjusted through different collimator.

Brachytherapy of carcinoma of vulva with 252Cf

International Nuclear Information System (INIS)

Spikalovas, V.; Sinkevicius, V.; Drulia, E.; Kurtinaitis, J.

1996-01-01

Thirty patients with carcinoma of vulva were treated with interstitial neutron radiotherapy with 252 Cf. Age of patients was from 32 to 83 years. Stage I was in I patient, stage II - in 12, stage III was in 10 patients. The diagnosis of vulvar cancer was made for the first time in 11 cases, 19 patients had recurrences after the initial treatment. Most of these patients also received external irradiation for cancer of vulva and bilateral inguinal sites with a single fraction dose of 2 Gy to a total dose 30-50 Gy. Enlarged inguinal lymph nodes were irradiated additionally to 60 Gy with reduced field of irradiation. When radiotherapy was used repeatedly interstitial brachytherapy comprised the major part of irradiation dose or the therapy was used alone delivering 35-55 iGy. We used 252 Cf sources with increased activity at the ends 20-30 mm long. A number of inserted sources varied from 2 to 10, irradiation dose rate from 20.3 to 236.7 cGy/h, time of irradiation from 10.2 to 12. hours, RBE from 4.6 to 6.33. Special template device made it possible to implant sources in strictly pre-set geometry. Analysis of survival of patients showed that 2 years survival was 66%, 3 years - 60%, and 5 years survival was 49%. In two cases necrotic epithelitis developed with following radiation ulcer which were cured in 3-4 months. Clinical data showed great effectiveness of interstitial neutron therapy having in mind that 19 patients were treated for recurrences of vulvar cancer after previuos treatment

Strength of SiCf-SiCm composite tube under uniaxial and multiaxial loading

Science.gov (United States)

Shapovalov, Kirill; Jacobsen, George M.; Alva, Luis; Truesdale, Nathaniel; Deck, Christian P.; Huang, Xinyu

2018-03-01

The authors report mechanical strength of nuclear grade silicon carbide fiber reinforced silicon carbide matrix composite (SiCf-SiCm) tubing under several different stress states. The composite tubing was fabricated via a Chemical Vapor Infiltration (CVI) process, and is being evaluated for accident tolerant nuclear fuel cladding. Several experimental techniques were applied including uniaxial tension, elastomer insert burst test, open and closed end hydraulic bladder burst test, and torsion test. These tests provided critical stress and strain values at proportional limit and at ultimate failure points. Full field strain measurements using digital image correlation (DIC) were obtained in order to acquire quantitative information on localized deformation during application of stress. Based on the test results, a failure map was constructed for the SiCf-SiCm composites.

Validation of IRDFF in 252Cf Standard and IRDF-2002 Reference Neutron Fields

Directory of Open Access Journals (Sweden)

Simakov Stanislav

2016-01-01

Full Text Available The results of validation of the latest release of International Reactor Dosimetry and Fusion File, IRDFF-1.03, in the standard 252Cf(s.f. and reference 235U(nth,f neutron benchmark fields are presented. The spectrum-averaged cross sections were shown to confirm IRDFF-1.03 in the 252Cf standard spontaneous fission spectrum; that was not the case for the current recommended spectra for 235U(nth,f. IRDFF was also validated in the spectra of the research reactor facilities ISNF, Sigma-Sigma and YAYOI, which are available in the IRDF-2002 collection. The ISNF facility was re-simulated to remove unphysical oscillations in the spectrum. IRDFF-1.03 was shown to reproduce reasonably well the spectrum-averaged data measured in these fields except for the case of YAYOI.

CF6 jet engine performance improvement program. Task 1: Feasibility analysis

Science.gov (United States)

Fasching, W. A.

1979-01-01

Technical and economic engine improvement concepts selected for subsequent development include: (1) fan improvement; (2) short core exhaust; (3) HP turbine aerodynamic improvement; (4) HP turbine roundness control; (5) HP turbine active clearance control; and (6) cabin air recirculation. The fuel savings for the selected engine modification concepts for the CF6 fleet are estimated.

Electron-beam irradiation effects on mechanical properties of PEEK/CF composite

International Nuclear Information System (INIS)

Sasuga, Tsuneo; Seguchi, Tadao

1989-01-01

Carbon fibre-reinforced composite (PEEK/CF) using polyarylether-ether-ketone (PEEK) as a matrix material was prepared and electron-beam irradiation effects on the mechanical properties at low and high temperatures were studied. The flexural strength and modulus of the unirradiated PEEK/CF were almost the same as those of carbon fibre-reinforced composites with epoxide resin. The mechanical properties at room temperature were little affected by irradiation up to 180 MGy, but in the test at 77K the strength of the specimens irradiated over 100 MGy was slightly decreased. The mechanical properties of the unirradiated specimen decreased with increasing testing temperature, but the high-temperature properties were improved by irradiation, i.e. the strength measured at 413K for the specimen irradiated with 120 MGy almost reached the value for the unirradiated specimen measured at room temperature. It was apparent from the viscoelastic measurement that the improvement of mechanical properties at high temperature resulted from the high-temperature shift of the glass transition of the matrix PEEK caused by radiation-induced cross-linking. (author)

Industrial hygiene survey. CF Chemicals, Inc., Bartow, Florida

International Nuclear Information System (INIS)

Stephenson, F.; Cassady, M.

1977-10-01

An industrial hygiene survey was conducted by NIOSH at CF Chemicals, Bartow, Florida on August 9-12, 1976 as part of a study of the phosphate industry. A description is given of the plant, and the medical, safety, and industrial hygiene programs. During the study, 8-hour time weighted averages were determined for exposure to arsenic, cadmium, chromium, vanadium, phosphoric acid, and sulfuric acid for workers involved in cleaning out phosphoric acid reactor vessels. General area samples were collected for fluorides, radon, and uranium. The results came within the OSHA standards except for two fluoride samples

The fast neutron emission spectrum of 252-Cf

International Nuclear Information System (INIS)

Bensch, F.

1979-07-01

The aim of this work was a new measurement of the neutron emission spectrum of 252-Cf neutron standard sources as the IAEA is offering to users. The main feature was the application of gas-filled proton-recoil spectrometers and no TOF technique. The special interest of this document was in the temperature parameter of the Maxwellian distribution and in its relative deviations. In this connection, special measurements with high energy resolution were carried out in a search for fine structure neutron groups, which have been observed in some TOF measurements, but could not be reproduced during this measurement

GeoCF - Smart Power Maps - Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Holcomb, Chris [GeoCF LLC, Austin, TX (United States)

2017-12-21

GeoCF has greatly enhanced the utility-scale solar siting platform, Smart Power Maps, through the help of the DOE Solar Energy Technologies Office. It is now available for the entire country and includes an improved user interface and additional layers such as topology, soils, comprehensive floodplains, parcels, imagery, wells, pipelines, and more. As well, users can now draw and save maps and perform drastically improved and more relevant hydrological, transmission, and financial analyzes. Smart Power Maps has played a pivotal role in supporting the development of otherwise unknown or hard to locate ideal locations for large solar farms in the United States.

The Clinical Study on Acupuncture Sensation in CC, CF and BV Herbal Acupuncture -The Basic Study on Placebo Herbal Acupuncture-

Directory of Open Access Journals (Sweden)

Seo Jung-Chul

2004-02-01

Full Text Available Objective : This study was designed to find out whether NS(normal saline is able to be constituted as an appropriate control group for CC(Cervi Cornu Parvum herbal acupuncture, CF(Carthami-Flos herbal acupuncture and BV(bee venom herbal acupuncture. Methods : NS and three herbal acupuncture were inserted into Quchi(LI 11 of the subjects. After 5 minutes the subjects completed a questionnaire rating the intensity of 21 kinds of acupuncture sensation; hurting, penetrating, sharp, aching, intense, spreading, radiating, tingling, pricking, stinging, pulling, heavy, dull, numb, electric, shocking, hot, burning, cool, pulsing, and throbbing. We compared subjective evaluations of acupuncture sensation between or among the groups. Results : As for CC half items of the acupuncture sensation were significantly different from NS. As for CF all items were not significantly different from NS. As for CC all items were significantly different from NS except one item. In general the score of CF acupuncture sensation was lower than the others and the score of BV acupuncture sensation was higher than the others from comparison of sensation among herbal acupunctures(CC, CF, BV. Conclusion : We found that NS is able to be an appropriate placebo herbal acupuncture for CF. Further study is needed for new placebo herbal acupuncture for CC and BV.

Median regression spline modeling of longitudinal FEV1 measurements in cystic fibrosis (CF) and chronic obstructive pulmonary disease (COPD) patients.

Science.gov (United States)

Conrad, Douglas J; Bailey, Barbara A; Hardie, Jon A; Bakke, Per S; Eagan, Tomas M L; Aarli, Bernt B

2017-01-01

Clinical phenotyping, therapeutic investigations as well as genomic, airway secretion metabolomic and metagenomic investigations can benefit from robust, nonlinear modeling of FEV1 in individual subjects. We demonstrate the utility of measuring FEV1 dynamics in representative cystic fibrosis (CF) and chronic obstructive pulmonary disease (COPD) populations. Individual FEV1 data from CF and COPD subjects were modeled by estimating median regression splines and their predicted first and second derivatives. Classes were created from variables that capture the dynamics of these curves in both cohorts. Nine FEV1 dynamic variables were identified from the splines and their predicted derivatives in individuals with CF (n = 177) and COPD (n = 374). Three FEV1 dynamic classes (i.e. stable, intermediate and hypervariable) were generated and described using these variables from both cohorts. In the CF cohort, the FEV1 hypervariable class (HV) was associated with a clinically unstable, female-dominated phenotypes while stable FEV1 class (S) individuals were highly associated with the male-dominated milder clinical phenotype. In the COPD cohort, associations were found between the FEV1 dynamic classes, the COPD GOLD grades, with exacerbation frequency and symptoms. Nonlinear modeling of FEV1 with splines provides new insights and is useful in characterizing CF and COPD clinical phenotypes.

D/N and /sup 18/O//sup 16/O in magmatic waters and gases of the Great Tolbachik fissure eruption, Kamchatka

Energy Technology Data Exchange (ETDEWEB)

Menyailov, I A; Vetshtein, V E; Nikitina, L P; Artemchuk, V G [AN SSSR, Petropavlovsk-Kamchatskii. Inst. Vulkanologii; AN Ukrainskoj SSR, Kiev. Inst. Geokhimii i Fiziki Mineralov)

1981-01-01

Isotope content of magmatic gases and their condensates (magmatic waters) is studied on the basis of the Great Tolbachik fissure eruption, Kamchatka. The phenomenon of regular increase of deuterium content in magmatic water and protium content in gases is found out. It is supposed that this fact is conditioned by isotope fractionation during phase transitions in liquid-steam-gas system in the process of the formation of magmatic hearth and gas release from magma during eruption.

Using CF11 cellulose columns to inexpensively and effectively remove human DNA from Plasmodium falciparum-infected whole blood samples

Directory of Open Access Journals (Sweden)

Venkatesan Meera

2012-02-01

Full Text Available Abstract Background Genome and transcriptome studies of Plasmodium nucleic acids obtained from parasitized whole blood are greatly improved by depletion of human DNA or enrichment of parasite DNA prior to next-generation sequencing and microarray hybridization. The most effective method currently used is a two-step procedure to deplete leukocytes: centrifugation using density gradient media followed by filtration through expensive, commercially available columns. This method is not easily implemented in field studies that collect hundreds of samples and simultaneously process samples for multiple laboratory analyses. Inexpensive syringes, hand-packed with CF11 cellulose powder, were recently shown to improve ex vivo cultivation of Plasmodium vivax obtained from parasitized whole blood. This study was undertaken to determine whether CF11 columns could be adapted to isolate Plasmodium falciparum DNA from parasitized whole blood and achieve current quantity and purity requirements for Illumina sequencing. Methods The CF11 procedure was compared with the current two-step standard of leukocyte depletion using parasitized red blood cells cultured in vitro and parasitized blood obtained ex vivo from Cambodian patients with malaria. Procedural variations in centrifugation and column size were tested, along with a range of blood volumes and parasite densities. Results CF11 filtration reliably produces 500 nanograms of DNA with less than 50% human DNA contamination, which is comparable to that obtained by the two-step method and falls within the current quality control requirements for Illumina sequencing. In addition, a centrifuge-free version of the CF11 filtration method to isolate P. falciparum DNA at remote and minimally equipped field sites in malaria-endemic areas was validated. Conclusions CF11 filtration is a cost-effective, scalable, one-step approach to remove human DNA from P. falciparum-infected whole blood samples.

Present status of SiCf/SiC composites as low-activation structural materials of fusion reactor in Japan

International Nuclear Information System (INIS)

Kohyama, A.; Katoh, Y.; Hasegawa, A.; Noda, T.

2001-01-01

The outline of research subjects on SiCf/SiC composites to apply to the structural components of fusion reactors are described and present status on material development of SiCf/SiC composites in Japan is reviewed. Irradiation experiments of the composites using fission reactors conducted by international collaborations to clarify their radiation response and to optimize the fabrication processes are introduced. (author)

Complete genome sequence of the actinobacterium Amycolatopsis japonica MG417-CF17T (=DSM 44213T) producing (S,S)-N,N′-ethylenediaminedisuccinic acid

DEFF Research Database (Denmark)

Stegmann, Evi; Albersmeier, Andreas; Spohn, Marius

2014-01-01

We report the complete genome sequence of Amycolatopsis japonica MG417-CF17T (=DSM 44213T) which was identified as the producer of (S,S)-N,N′-ethylenediaminedisuccinic acid during a screening for phospholipase C inhibitors. The genome of A. japonica MG417-CF17T consists of two replicons: the chro......We report the complete genome sequence of Amycolatopsis japonica MG417-CF17T (=DSM 44213T) which was identified as the producer of (S,S)-N,N′-ethylenediaminedisuccinic acid during a screening for phospholipase C inhibitors. The genome of A. japonica MG417-CF17T consists of two replicons...

Substitution and Redox Chemistry of [Bu(4)N](2)[Ta(6)Cl(12)(OSO(2)CF(3))(6)].

Science.gov (United States)

Prokopuk, Nicholas; Kennedy, Vance O.; Stern, Charlotte L.; Shriver, Duward F.

1998-09-21

Two sequential electrochemical reductions occur for the cluster anion [Ta(6)Cl(12)(OSO(2)CF(3))(6)](2)(-) at 0.89 and 0.29 V vs Ag/AgCl, with the generation [Ta(6)Cl(12)(OSO(2)CF(3))(6)](3)(-) and [Ta(6)Cl(12)(OSO(2)CF(3))(6)](4)(-). Chemical reduction of [Ta(6)Cl(12)(OSO(2)CF(3))(6)](2)(-) by ferrocene produces [Ta(6)Cl(12)(OSO(2)CF(3))(6)](3)(-) with the concomitant shift of the nu(SO(2)) stretch from 1002 to 1018 cm(-)(1). Reaction of [Bu(4)N](2)[Ta(6)Cl(12)(OSO(2)CF(3))(6)] (1) with [Bu(4)N]X (X = Cl, Br, I, NCS) occurs by reduction and substitution, yielding [Bu(4)N](3)[Ta(6)Cl(12)X(6)], where the clusters with X = Br, I, and NCS are new. Spectroscopic (IR and UV-vis) evidence indicates that the reduced cluster core {Ta(6)Cl(12)}(2+) is produced in reaction mixtures of 1 with the halide and pseudohalide ions. Concomitant substitution of the triflate ligands of 1 by X(-) occurs and the rates for the overall reduction and substitution increase in the order X(-) = Cl(-) < Br(-) < NCS(-) < I(-) < CN(-). Reduction of 1 with ferrocene followed by addition of [Bu(4)N]O(2)CCH(3) produces the new cluster [Ta(6)Cl(12)(O(2)CCH(3))(6)](3)(-) isolated as the tetrabutylammonium salt. Cyclic voltammetry and UV-vis spectroscopy on the new clusters [Bu(4)N](3)[Ta(6)Cl(12)X(6)] (X = Br, I, NCS, and O(2)CCH(3)) are reported. Crystal data for [Bu(4)N](3)[Ta(6)Cl(12)(NCS)(6)].CH(2)Cl(2): monoclinic, space group, P2(1)/c (No. 14); a = 25.855(6) Å, b = 21.843(6) Å, c = 16.423(3) Å; beta = 100.03(2) degrees; V = 9133(3) Å(3); Z = 4.

Filaggrin loss-of-function mutation R501X and 2282del4 carrier status is associated with fissured skin on the hands: results from a cross-sectional population study

DEFF Research Database (Denmark)

Thyssen, J P; Ross-Hansen, K; Johansen, J D

2012-01-01

Background: Filaggrin metabolites act as osmolytes and are important for skin hydration. Carriers of filaggrin loss-of-function mutations have a higher prevalence of atopic dermatitis and dry skin. There is also evidence to suggest that filaggrin mutations increase the risk of hand eczema in atopic...... whether filaggrin loss-of-function mutations are associated with skin fissures on the hands and/or fingers in the general population. Design: Participants of a population based study were questioned about skin symptom and genotyped for filaggrin mutation, patch tested for nickel allergy and skin prick...... tested. Results: In an adjusted logistic regression analysis, filaggrin mutation status was significantly associated with fissured skin on the hands and/or fingers in adults (OR=1.93; CI95%=1.05-3.55) and a near significant negative interaction with atopic dermatitis (p=0.055), suggesting the effect...

Development of neutron induced prompt γ-ray spectroscopy system using 252Cf

International Nuclear Information System (INIS)

Park, Yong-Joon; Song, Byung-Chul; Jee, Kwang-Yong

2003-01-01

For the design and set-up of neutron induced prompt γ-ray spectroscopy system using 252 Cf neutron source, the effects of shielding and moderator materials have been examined. The 252 Cf source being used for TLD badge calibration in Korea Atomic Energy Research Institute was utilized for this preliminary experiment. The γ-ray background and prompt γ-ray spectrum of the sample containing Cl were measured using HPGe (GMX 69% relative efficiency) located at the inside of the system connected to notebook PC at the outside of the system (about 20 meter distance). The background activities of neutron and γ-rays were measured with neutron survey meter as well as γ-ray survey meters, respectively and the system was designed to minimize the activities. Prompt γ-ray spectrum was measured using γ-γ coincident system for reduce the background and the continuum spectrum. The optimum system was designed and set up using the experimental data obtained

Determining {sup 252}Cf source strength by absolute passive neutron correlation counting

Energy Technology Data Exchange (ETDEWEB)

Croft, S. [Oak Ridge National Laboratory, Oak Ridge, TN 37831-6166 (United States); Henzlova, D., E-mail: henzlova@lanl.gov [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

2013-06-21

Physically small, lightly encapsulated, radionuclide sources containing {sup 252}Cf are widely used for a vast variety of industrial, medical, educational and research applications requiring a convenient source of neutrons. For many quantitative applications, such as detector efficiency calibrations, the absolute strength of the neutron emission is needed. In this work we show how, by using a neutron multiplicity counter the neutron emission rate can be obtained with high accuracy. This provides an independent and alternative way to create reference sources in-house for laboratories such as ours engaged in international safeguards metrology. The method makes use of the unique and well known properties of the {sup 252}Cf spontaneous fission system and applies advanced neutron correlation counting methods. We lay out the foundation of the method and demonstrate it experimentally. We show that accuracy comparable to the best methods currently used by national bodies to certify neutron source strengths is possible.

Simultaneous investigation of fission fragments and neutrons in 252Cf(s,f)

International Nuclear Information System (INIS)

Budtz-Joergensen, C.; Knitter, H.H.

1986-01-01

The gridded twin ion chamber developed at CBNM is used to measure the kinetic energy-, mass- and angular distributions of the fission fragments of 252 Cf in an advantageous 4π-geometry. Together with a neutron time-of-flight detector this experimental arrangement permits to measure the correlation between neutron emission, fragment angle, mass and energy in the spontaneous fission of 252 Cf. With the present experimental set-up a mass resolution for fission fragments of 0.5 a.m.u., an angular resolution of Δcosθ = 0.05 and a timing resolution of 0.7 ns FWHM were observed. Preliminary evaluations of the raw experimental data are presented for the fission fragment mass distribution, the average total kinetic energy and their variance as function of mass, the angular distribution between fragments and neutrons, the number of neutrons emitted per fragment as function of fragment mass, the average neutron emission energies as function of mass, and the prompt fission neutron spectrum averaged over all fragments. (author)

Retalhos de avanço no tratamento da fissura anal crônica: experiência inicial Advancement flap in the treatment of chronic anal fissure: inicial experience

Directory of Open Access Journals (Sweden)

Maria Auxiliadora Prolungatti Cesar

2009-12-01

Full Text Available A fissura anal é uma laceração do canal anal relacionada ao trauma, hipertonia esfincteriana e isquemia. A maioria cicatriza espontaneamente ou com tratamento conservador, e poucas requerem tratamento cirúrgico. O objetivo deste trabalho é verificar os resultados clínicos e alterações manométricas de pacientes submetidos ao tratamento cirúrgico da fissura anal com avançamento de retalhos em v-y. Métodos: Estudo prospectivo, realizado nos anos de 2007, 2008 e 2009, que abrangeu nove pacientes portadores de fissura anal crônica submetidos ao avançamento de retalho anal. Foram avaliadas as pressões do canal anal ao repouso, contração e esforço evacuatório; no pré e pós-operatório. Resultados: Na amostra, todos os pacientes apresentaram hipertonia esfincteriana prévia. seis (66,6% obtiveram resolução total dos sintomas e das lesões. Um (11,11% sofreu deiscência parcial do retalho, sem sintomas clínicos; e outros dois (22,22%, infecção com perda dos mesmos e persistência da fissura. A análise manométrica das pressões de repouso, contração e evacuação nos grupos não mostrou alteração estatisticamente significativa (p>0,05, o que comprova que a cirurgia não incluiu manipulação dos esfíncteres. Conclusão: Os retalhos anais mostraram-se efetivos no tratamento da fissura anal, com cicatrização da lesão, sem que ocorram alterações nas pressões anais desses pacientes.The anal fissure is a laceration of the anal canal related to trauma, hypertonic sphincter and ischemia. The majority heals spontaneously or with conservative treatment and only a few requires surgical treatment. The objective of this study is to verify the clinical results and manometric alterations of patients submitted to the surgical treatment of the anal fissure with advance of v-y skin flaps. Methods: Prospective study, accomplished in 2007,2008 and 2009, in witch nine patients with chronic anal fissure were submitted to v-y advance. The

TALENs Facilitate Single-step Seamless SDF Correction of F508del CFTR in Airway Epithelial Submucosal Gland Cell-derived CF-iPSCs

Directory of Open Access Journals (Sweden)

Shingo Suzuki

2016-01-01

Full Text Available Cystic fibrosis (CF is a recessive inherited disease associated with multiorgan damage that compromises epithelial and inflammatory cell function. Induced pluripotent stem cells (iPSCs have significantly advanced the potential of developing a personalized cell-based therapy for diseases like CF by generating patient-specific stem cells that can be differentiated into cells that repair tissues damaged by disease pathology. The F508del mutation in airway epithelial cell-derived CF-iPSCs was corrected with small/short DNA fragments (SDFs and sequence-specific TALENs. An allele-specific PCR, cyclic enrichment strategy gave ≃100-fold enrichment of the corrected CF-iPSCs after six enrichment cycles that facilitated isolation of corrected clones. The seamless SDF-based gene modification strategy used to correct the CF-iPSCs resulted in pluripotent cells that, when differentiated into endoderm/airway-like epithelial cells showed wild-type (wt airway epithelial cell cAMP-dependent Cl ion transport or showed the appropriate cell-type characteristics when differentiated along mesoderm/hematopoietic inflammatory cell lineage pathways.

Atmospheric chemistry of CF₃CH‗CH₂ and C₄F₉CH‗CH₂

DEFF Research Database (Denmark)

Nakayama, T.; Takahashi, K.; Matsumi, Y.

2007-01-01

FTIR-smog chamber techniques were used to study the products of the Cl atom and OH radical initiated oxidation of CF3CHCH2 in 700 Torr of N-2/O-2, diluent at 296 K. The Cl atom initiated oxidation of CF3CHCH2 in 700 Torr of air in the absence of NOx gives CF3C(O)CH2Cl and CF3CHO in yields of 70...

Cracking behavior of thermally aged and irradiated CF-8 cast austenitic stainless steel

Energy Technology Data Exchange (ETDEWEB)

Chen, Y., E-mail: Yiren_Chen@anl.gov [Argonne National Laboratory, 9700 S. Cass Ave, Argonne, IL 60439 (United States); Alexandreanu, B.; Chen, W.-Y.; Natesan, K. [Argonne National Laboratory, 9700 S. Cass Ave, Argonne, IL 60439 (United States); Li, Z.; Yang, Y. [University of Florida, Gainesville, FL 32611 (United States); Rao, A.S. [US Nuclear Regulatory Commission, 11545 Rockville Pike, Rockville, MD 20852 (United States)

2015-11-15

To assess the combined effect of thermal aging and neutron irradiation on the cracking behavior of CF-8 cast austenitic stainless steel, crack growth rate (CGR) and fracture toughness J-R curve tests were carried out on compact-tension specimens in high-purity water with low dissolved oxygen. Both unaged and thermally aged specimens were irradiated at ∼320 °C to 0.08 dpa. Thermal aging at 400 °C for 10,000 h apparently had no effect on the corrosion fatigue and stress corrosion cracking behavior in the test environment. The cracking susceptibility of CF-8 was not elevated significantly by neutron irradiation at 0.08 dpa. Transgranular cleavage-like cracking was the main fracture mode during the CGR tests, and a brittle morphology of delta ferrite was often seen on the fracture surfaces at the end of CGR tests. The fracture toughness J-R curve tests showed that both thermal aging and neutron irradiation can induce significant embrittlement. The loss of fracture toughness due to neutron irradiation was more pronounced in the unaged than aged specimens. After neutron irradiation, the fracture toughness values of the unaged and aged specimens were reduced to a similar level. G-phase precipitates were observed in the aged and irradiated specimens with or without prior aging. The similar microstructural changes resulting from thermal aging and irradiation suggest a common microstructural mechanism of inducing embrittlement in CF-8.

Development of a Time Projection Chamber using CF4 gas for relativistic heavy ion experiments

International Nuclear Information System (INIS)

Isobe, T.; Hamagaki, H.; Ozawa, K.; Inuzuka, M.; Sakaguchi, T.; Matsumoto, T.; Kametani, S.; Kajihara, F.; Gunji, T.; Kurihara, N.; Oda, S.X.; Yamaguchi, Y.L.

2006-01-01

A prototype Time Projection Chamber (TPC) using pure CF 4 gas was developed for possible use in heavy ion experiments. Basic characteristics such as gain, drift velocity, longitudinal diffusion and attenuation length of produced electrons were measured with the TPC. At an electric field of 900V/cm, the drift velocity and longitudinal diffusion for 1cm drift were obtained as 10cm/μs and 60μm, respectively. The relatively large gain fluctuation is explained to be due to the electron attachment process in CF 4 . These characteristics are encouraging for the measurement of the charged particle trajectories under high multiplicity conditions at RHIC

Approaches for the generation of a covariance matrix for the Cf-252 fission-neutron spectrum

International Nuclear Information System (INIS)

Mannhart, W.

1983-01-01

After a brief retrospective glance is cast at the situation, the evaluation of the Cf-252 neutron spectrum with a complete covariance matrix based on the results of integral experiments is proposed. The different steps already taken in such an evaluation and work in progress are reviewed. It is shown that special attention should be given to the normalization of the neutron spectrum which must be reflected in the covariance matrix. The result of the least-squares adjustment procedure applied can easily be combined with the results of direct spectrum measurements and should be regarded as the first step in a new evaluation of the Cf-252 fission-neutron spectrum. (author)

The reaction of CF2Cl2 with gas-phase hydrated electrons

Czech Academy of Sciences Publication Activity Database

Lengyel, J.; van der Linde, Ch.; Fárník, Michal; Beyer, M. K.

2016-01-01

Roč. 18, č. 34 (2016), s. 23910-23915 ISSN 1463-9076 R&D Projects: GA ČR GA14-08937S Institutional support: RVO:61388955 Keywords : NEGATIVE-ION FORMATION * INFRARED RADIATIVE DISSOCIATION * POLAR MOLECULE COLLISIONS Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.123, year: 2016

Etching characteristic and mechanism of BST thin films using inductively coupled Cl2/Ar plasma with additive CF4 gas

International Nuclear Information System (INIS)

Kim, Gwan-Ha; Kim, Kyoung-Tae; Kim, Dong-Pyo; Kim, Chang-Il

2004-01-01

BST thin films were etched with inductively coupled CF 4 /(Cl 2 +Ar) plasmas. The maximum etch rate of the BST thin films was 53.6 nm/min for a 10% CF 4 to the Cl 2 /Ar gas mixture at RF power of 700 W, DC bias of -150 V, and chamber pressure of 2 Pa. Small addition of CF 4 to the Cl 2 /Ar mixture increased chemical effect. Consequently, the increased chemical effect caused the increase in the etch rate of the BST thin films. To clarify the etching mechanism, the surface reaction of the BST thin films was investigated by X-ray photoelectron spectroscopy

Friedel-Crafts reaction of benzyl fluorides: selective activation of C-F bonds as enabled by hydrogen bonding.

Science.gov (United States)

Champagne, Pier Alexandre; Benhassine, Yasmine; Desroches, Justine; Paquin, Jean-François

2014-12-08

A Friedel-Crafts benzylation of arenes with benzyl fluorides has been developed. The reaction produces 1,1-diaryl alkanes in good yield under mild conditions without the need for a transition metal or a strong Lewis acid. A mechanism involving activation of the C-F bond through hydrogen bonding is proposed. This mode of activation enables the selective reaction of benzylic C-F bonds in the presence of other benzylic leaving groups. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Atmospheric chemistry of CH3CHF2 (R-152a): mechanism of the CH3CF2O2+HO2 reaction

DEFF Research Database (Denmark)

Hashikawa, Y; Kawasaki, M; Andersen, Mads Peter Sulbæk

2004-01-01

FTIR smog chamber techniques have been used to investigate the mechanism of the reaction of CH3CF2O2 with HO2 radicals in 100-700 Torr of synthetic air at 296 K. The reaction gives CH3CF2OOH and COF2 in molar yields of 0.53 +/- 0.05 and 0.47 +/- 0.05, respectively. Results are discussed with resp......FTIR smog chamber techniques have been used to investigate the mechanism of the reaction of CH3CF2O2 with HO2 radicals in 100-700 Torr of synthetic air at 296 K. The reaction gives CH3CF2OOH and COF2 in molar yields of 0.53 +/- 0.05 and 0.47 +/- 0.05, respectively. Results are discussed...

High-density plasma etching characteristics of indium-gallium-zinc oxide thin films in CF{sub 4}/Ar plasma

Energy Technology Data Exchange (ETDEWEB)

Joo, Young-Hee; Kim, Chang-Il

2015-05-29

We investigated the etching process of indium-gallium-zinc oxide (IGZO) thin films in an inductively coupled plasma system. The dry etching characteristics of the IGZO thin films were studied by varying the CF{sub 4}/Ar gas mixing ratio, RF power, DC-bias voltage, and process pressure. We determined the following optimized process conditions: an RF power of 700 W, a DC-bias voltage of − 150 V, and a process pressure of 2 Pa. A maximum etch rate of 25.63 nm/min for the IGZO thin films was achieved in a plasma with CF{sub 4}/Ar(= 25:75), and the selectivity of IGZO to Al and TiN was found to be 1.3 and 0.7, respectively. We determined the ionic composition of the CF{sub 4}/Ar plasma using optical emission spectroscopy. Analysis of chemical reactions at the IGZO thin film surfaces was performed using X-ray photoelectron spectroscopy. - Highlights: • IGZO thin film was etched by CF{sub 4}/Ar plasma as a function of gas mixing ratio. • IGZO bonds were broken Ar{sup +} sputtering and then reacted with the C-F{sub x} radicals. • The physical sputtering is dominant in etch control compared with chemical etching.

Thinning and functionalization of few-layer graphene sheets by CF4 plasma treatment

KAUST Repository

Shen, Chao; Cao, Ronggen; Cheng, Yingchun; Ding, Fei; Huang, Gaoshan; Mei, Yongfeng; Schwingenschlö gl, Udo

2012-01-01

of the graphene lattice as well as functionalization during the plasma treatment. The F/CF3 adsorption and the lattice distortion produced are proved by theoretical simulation using density functional theory, which also predicts p-type doping and Dirac cone

New frameshift CF mutation 3729delAinsTCT in a Tunisian cystic

Indian Academy of Sciences (India)

Home; Journals; Journal of Genetics; Volume 92; Issue 1. New frameshift CF mutation 3729delAinsTCT in a Tunisian cystic fibrosis patient. Sondess Hadj Fredj Monia Boudaya Sabrine Oueslati Safa Sahnoun Chaima Sahli Hajer Siala Khedija Boussetta Amina Bibi Taieb Messaoud. Research Note Volume 92 Issue 1 April ...

Sylvian Fissure and Parietal Anatomy in Children with Autism Spectrum Disorder

Directory of Open Access Journals (Sweden)

Tracey A. Knaus

2012-01-01

Full Text Available Autism spectrum disorder (ASD is characterized by deficits in social functioning and language and communication, with restricted interests or stereotyped behaviors. Anatomical differences have been found in the parietal cortex in children with ASD, but parietal subregions and associations between Sylvian fissure (SF and parietal anatomy have not been explored. In this study, SF length and anterior and posterior parietal volumes were measured on MRI in 30 right-handed boys with ASD and 30 right-handed typically developing boys (7–14 years, matched on age and non-verbal IQ. There was leftward SF and anterior parietal asymmetry, and rightward posterior parietal asymmetry, across groups. There were associations between SF and parietal asymmetries, with slight group differences. Typical SF asymmetry was associated with typical anterior and posterior parietal asymmetry, in both groups. In the atypical SF asymmetry group, controls had atypical parietal asymmetry, whereas in ASD there were more equal numbers of individuals with typical as atypical anterior parietal asymmetry. We did not find significant anatomical-behavioral associations. Our findings of more individuals in the ASD group having a dissociation between cortical asymmetries warrants further investigation of these subgroups and emphasizes the importance of investigating anatomical relationships in addition to group differences in individual regions.

Hypoplasia of the basi-occipital bone and persistance of the spheno-occipital synchondrosis in a patient with transitory supplementary fissure of the basi-occipital

International Nuclear Information System (INIS)

Wackenheim, A.

1985-01-01

The author had the opportunity to observe the progressive development of a special form of basilar impression characterized by transitory supplementary fissure of the basi-occipital bone, persistance of the spheno-occipital synchondrosis and hypoplasia of the basi-occipital. He proposes to dissociate the general concept of basilar impression and to consider anatomo-clinical entities such as the example described in this paper. (orig.)

{sup 5}He ternary fission yields of {sup 252}Cf and {sup 235}U(n,f)

Energy Technology Data Exchange (ETDEWEB)

Hwang, J. K. [Department of Physics, Vanderbilt University, Nashville, Tennessee 37235 (United States); Ramayya, A. V. [Department of Physics, Vanderbilt University, Nashville, Tennessee 37235 (United States); Hamilton, J. H. [Department of Physics, Vanderbilt University, Nashville, Tennessee 37235 (United States); Beyer, C. J. [Department of Physics, Vanderbilt University, Nashville, Tennessee 37235 (United States); Kormicki, J. [Department of Physics, Vanderbilt University, Nashville, Tennessee 37235 (United States); Zhang, X. Q. [Department of Physics, Vanderbilt University, Nashville, Tennessee 37235 (United States); Rodin, A. [Flerov Laboratory for Nuclear Reactions, Joint Institute for Nuclear Research, Dubna, Russia (Russian Federation); Formichev, A. [Flerov Laboratory for Nuclear Reactions, Joint Institute for Nuclear Research, Dubna, Russia (Russian Federation); Kliman, J. [Flerov Laboratory for Nuclear Reactions, Joint Institute for Nuclear Research, Dubna, Russia (Russian Federation); Krupa, L. [Flerov Laboratory for Nuclear Reactions, Joint Institute for Nuclear Research, Dubna, Russia (Russian Federation)] (and others)

2000-04-01

The relative {sup 4}He and {sup 5}He ternary fission yields were determined from a careful analysis of the energy distribution of {alpha} spectra from a new measurement with a {sup 252}Cf source and from published data on {sup 252}Cf and {sup 235}U(n,f). The kinetic energies of the {sup 5}He and {sup 4}He ternary particles were found to be approximately 11 and 16 MeV, respectively. {sup 5}He particles contribute 10-20 % to the total alpha yield with the remainder originating from {sup 4}He accompanied fission. (c) 2000 The American Physical Society.

Dosimetric evaluation of 252Cf beam for use in radiobiology studies at Hiroshima University

International Nuclear Information System (INIS)

Hoshi, M.; Takeoka, S.; Tsujimura, T.; Kuroda, T.; Kawami, M.; Sawada, S.

1988-01-01

This report provides reliable tissue kerma in free air data by characterising the 252 Cf irradiating system and by comparing three dosimetry methods, paired chambers (ICRU 1977, 1978), Fricke and thermoluminescence dosemeter. (author)

Comparison of six different methods of cleaning and preparing occlusal fissure surface before placement of pit and fissure sealant: An in vitro study

Directory of Open Access Journals (Sweden)

A Agrawal

2012-01-01

Full Text Available Aim & Objectives : The purpose of this in vitro study was to evaluate and compare the microleakage of pit and fissure sealants after using six different preparation techniques: (a brush, (b pumice slurry application, (c bur, (d air polishing, (e air abrasion, and (f longer etching time. Material & Method : The study was conducted on 60 caries-free first premolars extracted for orthodontic purpose. These teeth were randomly assigned to six groups of 10 teeth each. Teeth were prepared using one of six occlusal surface treatments prior to placement of Clinpro" 3M ESPE light-cured sealant. The teeth were thermocycled for 500 cycles and stored in 0.9% normal saline. Teeth were sealed apically and coated with nail varnish 1 mm from the margin and stained in 1% methylene blue for 24 hours. Each tooth was divided buccolingually parallel to the long axis of the tooth, yielding two sections per tooth for analysis. The surfaces were scored from 0 to 2 for the extent of microleakage. Statistical Analysis : Results obtained for microleakage were analyzed by using t-tests at sectional level and chi-square test and analysis of variance (ANOVA at the group level. Results : The results of round bur group were significantly superior when compared to all other groups. The application of air polishing and air abrasion showed better results than pumice slurry, bristle brush, and longer etching time. Round bur group was the most successful cleaning and preparing technique. Air polishing and air abrasion produced significantly less microleakage than traditional pumice slurry, bristle brush, and longer etching time.

Why are SiX5(-) and GeX5(-) (X = F, Cl) stable but not CF5(-) and CCl5(-)?

Science.gov (United States)

Marchaj, Marzena; Freza, Sylwia; Skurski, Piotr

2012-03-01

The possible existence of the CF(5)(-), CCl(5)(-), SiF(5)(-), SiCl(5)(-), GeF(5)(-), and GeCl(5)(-) anions has been investigated using ab initio methods. The species containing Si and Ge as central atoms were found to adopt the D(3h)-symmetry trigonal bipyramidal equilibrium structures whose thermodynamic stabilities were confirmed by examining the most probable fragmentation channels. The ab initio re-examination of the electronic stabilities of the SiF(5)(-), SiCl(5)(-), GeF(5)(-), and GeCl(5)(-) anions [using the OVGF(full) method with the 6-311+G(3df) basis set] led to the very large vertical electron detachment (VDE) energies of 9.316 eV (SiF(5)(-)) and 9.742 eV (GeF(5)(-)), whereas smaller VDEs of 6.196 and 6.452 eV were predicted for the SiCl(5)(-) and GeCl(5)(-) species, respectively. By contrast, the high-symmetry and structurally compact anionic CF(5)(-) and CCl(5)(-) systems cannot exist due to the strongly repulsive potential predicted for the X(-) (F(-) or Cl(-)) approaching the CX(4) (CF(4) or CCl(4)). The formation of weakly bound CX(4)···X(-) (CF(4)···F(-) and CCl(4)···Cl(-)) anionic complexes (consisting of pseudotetrahedral neutral CX(4) with the weakly tethered X(-)) might be expected at low temperatures (approaching 0 K), whereas neither CX(5)(-) (CF(5)(-), CCl(5)(-)) systems nor CX(4)···X(-) (CF(4)···F(-) and CCl(4)···Cl(-)) complexes can exist in the elevated temperatures (above 0K) due to their susceptibility to the fragmentation (leading to the X(-) loss). © 2012 American Chemical Society

Fast Etching of Molding Compound by an Ar/O2/CF4 Plasma and Process Improvements for Semiconductor Package Decapsulation

NARCIS (Netherlands)

Tang, J.; Gruber, D.; Schelen, J.B.J.; Funke, H.J.; Beenakker, C.I.M.

2012-01-01

Decapsulation of a SOT23 semiconductor package with 23 um copper wire bonds is conducted with an especially designed microwave induced plasma system. It is found that a 30%-60% CF4 addition in the O2/CF4 etchant gas results in high molding compound etching rate. Si3N4 overetching which is

Levels of 250Cf populated in the decay of 250Bk

International Nuclear Information System (INIS)

Uecke, J.W.

1975-06-01

The nuclide 250 Bk undergoes β-decay with a half-life of 3.2 h to 13.1 y 250 Cf. A study is undertaken of the excited states in 250 Cf populated by 250 Bk decay which results from the α-decay of 276d 254 Es. The general features of published level schemes for these nuclei are consistent with predictions of the Nilsson and collective models; however, there remain many undiscovered transitions and ambiguous or uncertain level assignments. In an attempt to confirm predictions of current theoretical models which account for nuclear level assignments in this nucleus, these gamma transitions and their levels have been studied. Twenty-eight new γ-rays were determined. The decay of 250 Bk is investigated primarily by high resolution gamma-ray singles spectrometry and supported in part by two-parameter gamma-gamma coincidence spectrometry. The equipment, comprised of a Ge(HP) and a large volume Ge(Li) detector, a 4096-channel two-parameter analyzer, and a PDP-8/e computer system, permitted significant improvement in sensitivity and accuracy over previous investigations on this nucleus. (11 figures, 2 tables) (U.S.)

Novel regulator of acylated ghrelin, CF801, reduces weight gain, rebound feeding after a fast, and adiposity in mice

Directory of Open Access Journals (Sweden)

Martin K Wellman

2015-09-01

Full Text Available Ghrelin is a 28 amino-acid hormonal peptide that is intimately related to the regulation of food intake and body weight. Once secreted, ghrelin binds to the growth hormone secretagogue receptor-1a (GHSR-1a, the only known receptor for ghrelin and is capable of activating a number of signaling cascades ultimately resulting in an increase in food intake and adiposity. Because ghrelin has been linked to overeating and the development of obesity, a number of pharmacological interventions have been generated in order to interfere with either the activation of ghrelin or interrupting ghrelin signaling as a means to reducing appetite and decrease weight gain. Here we present a novel peptide, CF801, capable of reducing circulating acylated ghrelin levels and subsequent body weight gain and adiposity. To this end, we show that IP administration of CF801 is sufficient to reduce circulating plasma acylated ghrelin levels. Acutely, intraperitoneal injections of CF801 resulted in decreased rebound feeding after an overnight fast. When delivered chronically decreased weight gain and adiposity without affecting caloric intake. CF801, however, did cause a change in diet preference, decreasing preference for a high fat diet and increasing preference for regular chow diet. Given the complexity of ghrelin receptor function, we propose that CF801 along with other compounds that regulate ghrelin secretion may prove to be a beneficial tool in the study of the ghrelin system, and potential targets for ghrelin based obesity treatments without altering the function of ghrelin receptors.

Biologia reprodutiva de Psychotria spectabilis Steyrm. e Palicourea cf. virens (Poepp & Endl. Standl. (Rubiaceae em uma floresta tropical úmida na região de Manaus, AM, Brasil Reproductive biology of Psychotria spectabilis Steyrm. and Palicourea cf. virens (Poepp. & Endl. Standl. (Rubiaceae in a moist tropical forest at Manaus, Amazonas State, Brazil

Directory of Open Access Journals (Sweden)

Otilene dos Anjos Santos

2008-03-01

Full Text Available Este estudo descreve a fenologia reprodutiva, morfologia e biologia floral, polinização e sucesso reprodutivo de Psychotria spectabilis e Palicourea cf. virens. Psychotria spectabilis floresceu de setembro a dezembro enquanto Palicourea cf. virens floresceu de maio a outubro. As inflorescências de Psychotria spectabilis são inflorescências terminais do tipo capítulo, com brácteas amarelas, flores brancas e heterostilia associada a diferenças na papila estigmática. Palicourea cf. virens apresenta inflorescências terminais do tipo corimbo, com flores amarelas homostílicas. Os recursos florais oferecidos foram néctar e pólen em ambas as espécies. Os beija-flores Phaethornis bourcieri e o macho de Thalurania furcata foram os principais visitantes florais de Psychotria spectabilis. Palicourea cf. virens também foi visitada por Thalurania furcata, com maior freqüência de visitas pela fêmea desta espécie. A abelha Trigona fulviventris visitou as flores das duas espécies, mas se comportou como pilhadora. O sucesso reprodutivo pré-emergente (SRPE das duas espécies foi baixo, embora tenham apresentado um alto potencial reprodutivo.This study describes the reproductive phenology, floral biology, pollination and reproductive success of Psychotria spectabilis and Palicourea cf. virens. Psychotria spectabilis flowered from September to December while P. cf. virens flowered from May to October. The terminal inflorescence of Psychotria spectabilis is of the capitate type with yellow bracts, white flowers and heterostyly associated with differences of stigmatic papillae. The terminal inflorescence of Palicourea cf. virens is a corymb with yellow, homostylous flowers. Flower resources include nectar and pollen for both species. The hummingbirds Phaethornis bourcieri and the male of Thalurania furcata were the main floral visitors of Psychotria spectabilis. Palicourea cf. virens was also visited by T. furcata, but the female was the main

Fast neutron therapy with high intensity Cf-252 sources by remotely controlled afterloading and clinical experiences in the treatment of gynaecological cancers

International Nuclear Information System (INIS)

Yamashita, H.; Hashimoto, S.; Wada, M.; Dokiya, T.

1986-01-01

Cf-252 fast neutron therapy with high intensity Cf-252 sources was tested for the treatment of advanced gynaecological cancers using a remotely controlled afterloading machine designed by the author and manufactured by Toshiba. Using high intensity sources and short treatment times in a special treatment room, personnel or environment exposure to radiation was at a safe level, i.e. almost nil. During 1978-1983 18 stage III cases of cancer of the uterine cervix were treated with complete response in 78% and 44% 5 year survivals. The types of acute and delayed effects of Cf-252 were the same as Co-60 or Cs-137 but the rectum was found sensitive in this system of brachytherapy. A dose of 1,000-1,500 cGy/6-10 F in 10-22 days of Cf-252 radiation was tolerated and produced tumor cure