Glass-based confined structures enabling light control

Energy Technology Data Exchange (ETDEWEB)

Chiappini, Andrea; Normani, Simone; Chiasera, Alessandro [IFN–CNR CSMFO Lab., and FBK Photonics Unit via alla Cascata 56/C Povo, 38123 Trento (Italy); Lukowiak, Anna [Institute of Low Temperature and Structure Research PAS, Okolna St. 2, 50-422 Wroclaw (Poland); Vasilchenko, Iustyna [IFN–CNR CSMFO Lab., and FBK Photonics Unit via alla Cascata 56/C Povo, 38123 Trento (Italy); Dipartimento di Fisica, Università di Trento, via Sommarive 14 Povo, 38123Trento (Italy); Ristic, Davor [Institut Ruđer Bošković, Bijenička cesta 54, 10000 Zagreb (Croatia); Boulard, Brigitte [IMMM, CNRS Equipe Fluorures, Université du Maine, Av. Messiaen, 72085 Le Mans cedex 9 (France); Dorosz, Dominik [Department of Power Engineering, Photonics and Lighting Technology, Bialystok University of Technology, Wiejska Street 45D, 15-351 Bialystok (Poland); Scotognella, Francesco [Center for Nano Science and Technology@PoliMi, Istituto Italiano di Tecnologia, Via Giovanni Pascoli, 70/3, 20133, Milan (Italy); Politecnico di Milano, Dipartimento di Fisica and Istituto di Fotonica e Nanotecnologie CNR, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); Vaccari, Alessandro [FBK -CMM, ARES Unit, 38123 Trento (Italy); Taccheo, Stefano [College of Engineering, Swansea University, Singleton Park, SA2 8PP, Swansea (United Kingdom); Pelli, Stefano; Righini, Giancarlo C. [IFAC - CNR, MiPLab., 50019 Sesto Fiorentino (Italy); Museo Storico della Fisica e Centro di Studi e Ricerche “Enrico Fermi”, Piazza del Viminale 1, 00184 Roma (Italy); Conti, Gualtiero Nunzi [IFAC - CNR, MiPLab., 50019 Sesto Fiorentino (Italy); Ramponi, Roberta [Politecnico di Milano, Dipartimento di Fisica and Istituto di Fotonica e Nanotecnologie CNR, Piazza Leonardo da Vinci 32, 20133 Milano (Italy); and others

2015-04-24

When a luminescent ion is confined in a system characterized by one or more specific properties such as spatial size, geometrical dimension and shape, refractive index, local crystal field, cut-off vibrational energy and so on, it's possible to control its emission. The control of branching ratios as a function of the composition, the luminescence enhancement induced by a photonic crystal, or the laser action in a microresonator, are well known examples of light control. Photonic glass-based structures are extremely viable systems to exploit the above mentioned properties and in our research team we have successfully fabricated luminescent photonic structures by different techniques, including sol-gel, rf sputtering, drawing, melting, and physical vapour deposition. Here we will discuss some of them with the aim to make the reader aware of the chemical-physical properties related to each specific system. We will demonstrate that glass ceramic waveguides in some cases present superior spectroscopic properties in respect to the parent glass, that compositional properties can play a positive role in reducing luminescence quenching and in developing novel planar waveguides and fibers, that colloids allow to obtain high internal quantum efficiency and that photonic crystals, microcavities and microresonators can enable the handling of the rare earth luminescence. Finally, the pros and cons of the systems and of the different techniques employed for their fabrication will be discussed and some perspectives concerning the glass photonics will be proposed looking at both possible applications and investigation of physical properties.

Glass-based confined structures enabling light control

International Nuclear Information System (INIS)

Chiappini, Andrea; Normani, Simone; Chiasera, Alessandro; Lukowiak, Anna; Vasilchenko, Iustyna; Ristic, Davor; Boulard, Brigitte; Dorosz, Dominik; Scotognella, Francesco; Vaccari, Alessandro; Taccheo, Stefano; Pelli, Stefano; Righini, Giancarlo C.; Conti, Gualtiero Nunzi; Ramponi, Roberta

2015-01-01

When a luminescent ion is confined in a system characterized by one or more specific properties such as spatial size, geometrical dimension and shape, refractive index, local crystal field, cut-off vibrational energy and so on, it's possible to control its emission. The control of branching ratios as a function of the composition, the luminescence enhancement induced by a photonic crystal, or the laser action in a microresonator, are well known examples of light control. Photonic glass-based structures are extremely viable systems to exploit the above mentioned properties and in our research team we have successfully fabricated luminescent photonic structures by different techniques, including sol-gel, rf sputtering, drawing, melting, and physical vapour deposition. Here we will discuss some of them with the aim to make the reader aware of the chemical-physical properties related to each specific system. We will demonstrate that glass ceramic waveguides in some cases present superior spectroscopic properties in respect to the parent glass, that compositional properties can play a positive role in reducing luminescence quenching and in developing novel planar waveguides and fibers, that colloids allow to obtain high internal quantum efficiency and that photonic crystals, microcavities and microresonators can enable the handling of the rare earth luminescence. Finally, the pros and cons of the systems and of the different techniques employed for their fabrication will be discussed and some perspectives concerning the glass photonics will be proposed looking at both possible applications and investigation of physical properties

Power Controllability of Three-phase Converter with Unbalanced AC Source

DEFF Research Database (Denmark)

Ma, Ke; Chen, Wenjie; Liserre, Marco

2015-01-01

Three-phase DC-AC power converters suffer from power oscillation and overcurrent problems in case of unbalanced AC source voltage that can be caused by grid/generator faults. Existing solutions to handle these problems are properly selecting and controlling the positive and negative sequence...... currents. In this work a new series of control strategies which utilize the zerosequence components are proposed to enhance the power control ability under this adverse condition. It is concluded that by introducing proper zero sequence current controls and corresponding circuit configurations, the power...... converter can enable more flexible control targets, achieving better performances in the delivered power and load current when suffering from unbalanced AC voltage....

Enabling autonomous control for space reactor power systems

International Nuclear Information System (INIS)

Wood, R. T.

2006-01-01

functional architecture that can support SRPS control for an extended deep space mission. The desirable characteristics of autonomous control include intelligence, robustness, optimization, flexibility, and adaptability. The degree of autonomy that is necessary for a given mission will depend on resource constraints, performance goals, operational complexity, technological capabilities, and mission risk considerations. The prospective architectural framework employs a hierarchical structure to integrate needed control, diagnostic, and decision functions and thus enable autonomy. (authors)

Smartphone-controlled optogenetically engineered cells enable semiautomatic glucose homeostasis in diabetic mice.

Science.gov (United States)

Shao, Jiawei; Xue, Shuai; Yu, Guiling; Yu, Yuanhuan; Yang, Xueping; Bai, Yu; Zhu, Sucheng; Yang, Linfeng; Yin, Jianli; Wang, Yidan; Liao, Shuyong; Guo, Sanwei; Xie, Mingqi; Fussenegger, Martin; Ye, Haifeng

2017-04-26

With the increasingly dominant role of smartphones in our lives, mobile health care systems integrating advanced point-of-care technologies to manage chronic diseases are gaining attention. Using a multidisciplinary design principle coupling electrical engineering, software development, and synthetic biology, we have engineered a technological infrastructure enabling the smartphone-assisted semiautomatic treatment of diabetes in mice. A custom-designed home server SmartController was programmed to process wireless signals, enabling a smartphone to regulate hormone production by optically engineered cells implanted in diabetic mice via a far-red light (FRL)-responsive optogenetic interface. To develop this wireless controller network, we designed and implanted hydrogel capsules carrying both engineered cells and wirelessly powered FRL LEDs (light-emitting diodes). In vivo production of a short variant of human glucagon-like peptide 1 (shGLP-1) or mouse insulin by the engineered cells in the hydrogel could be remotely controlled by smartphone programs or a custom-engineered Bluetooth-active glucometer in a semiautomatic, glucose-dependent manner. By combining electronic device-generated digital signals with optogenetically engineered cells, this study provides a step toward translating cell-based therapies into the clinic. Copyright © 2017, American Association for the Advancement of Science.

Larmor time and proper time

Energy Technology Data Exchange (ETDEWEB)

Kudaka, Shoju [Department of Physics, University of the Ryukyus, Okinawa 903-0129 (Japan); Matsumoto, Shuichi, E-mail: shuichi@edu.u-ryukyu.ac.jp [Department of Mathematics, University of the Ryukyus, Okinawa 903-0129 (Japan)

2012-10-01

The idea of a Larmor clock is reexamined in the relativistic regime. We propose a concept of proper time for quantum theoretical particles. The Larmor clock can measure, under some relevant conditions, the proper time that passes while the particle stays in a space region. Our approach to Larmor clock is different than those of other researchers in the following two aspects: our concept of Larmor clock does not distinguish whether the particle is transmitted or reflected at the end of its stay, and pointer of our Larmor clock is not the spin but the total angular momentum. -- Highlights: ► The idea of a Larmor clock is reexamined in the relativistic regime. ► We propose a concept of proper time for quantum theoretical particles. ► The Larmor clock measures the passage of this quantum theoretical proper time.

Control valve friction operational experience at Darlington NGD

International Nuclear Information System (INIS)

Speer, B.

1995-01-01

Proper installation of valve packing is an important part of ensuring that control valves operate as intended. Darlington NGD has developed a Valve Packing Program. This program combined with valve diagnostics has enabled the station to ensure that the operability of control valves is maintained after repacking. This paper outlines the process that is used for this. (author)

7 CFR 29.112 - Proper light.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Proper light. 29.112 Section 29.112 Agriculture... INSPECTION Regulations Inspectors, Samplers, and Weighers § 29.112 Proper light. Tobacco shall not be inspected or sampled for the purposes of the Act except when displayed in proper light for correct...

Predicting Factors of Worker Behavior for Proper Working Posture Based on Planed Behavior Theory

Directory of Open Access Journals (Sweden)

E Mohammadi Zeydi

2008-12-01

Introduction & Objective: Injuries resulting from ignoring proper working posture especially in employees who sitting at workplace for more than of working hours are costly, and create significant pain and discomfort. Decreasing of these injuries is most effectively accomplished through the application of ergonomic design principles. Sometimes, however, barriers (technical and economic preclude ergonomic improvement and, consequently, some organizations rely on the use of proper sitting techniques and maintaining proper working posture as a major control strategy during workday. The problem, however, is that these process performing is inconsistent and managers have a difficult time motivating use of these techniques. The main aim of this study was to understand the factors driving proper working posture among employees. Materials & Methods: This study used the theory of planned behavior to predict upright working posture maintenance among 222 of assembling, machinery and printing line’s employees at a Qazvin Alborz industrial town manufacturing organization. Structural equation modeling, explanatory and confirmatory factor analysis were employed to analyze relationships among constructs. Results: Results revealed that attitude (p< 0.05, β= 0.53 and intention (p< 0.05, β= 0.46 were the strongest predictors of proper working posture maintenance behavior. Perceived behavior control, to a lesser degree, were also important influences on intention (p< 0.05, β= 0.34 and behavior (p< 0.05, β= 0.28. Subjective norms did not surface as effective direct predictors of upright working posture maintenance, but did affect behavior and intent via mediating factors (attitudes subjective norms and perceived behavioral control. Finally, the TPB was supported as an effective model explaining upright working posture maintenance, and had potential application for many other safety-related behaviors. Conclusion: results of this study emphasis on considering factors such as

Power Controllability of Three-phase Converter with Unbalanced AC Source

DEFF Research Database (Denmark)

Ma, Ke; Liserre, Marco; Blaabjerg, Frede

2013-01-01

Three-phase DC-AC power converters suffer from power oscillation and overcurrentt problems in case of unbalanced AC source voltage that can be caused by grid/generator faults. Existing solutions to handle these problems are properly selecting and controlling the positive and negative sequence...... currents. In this work a new series of control strategies which utilize the zero-sequence components are proposed to enhance the power control ability under this adverse conditions. It is concluded that by introducing proper zero sequence current controls and corresponding circuit configurations, the power...... converter can enable more flexible control targets, achieving better performances in the delivered power and load current when suffering from unbalanced AC sources....

Proper Acknowledgment?

Science.gov (United States)

East, Julianne

2005-01-01

The concern in Australian universities about the prevalence of plagiarism has led to the development of policies about academic integrity and in turn focused attention on the need to inform students about how to avoid plagiarism and how to properly acknowledge. Teaching students how to avoid plagiarism can appear to be straightforward if based on…

Internal budget control

OpenAIRE

MSc. Mervete Shala

2011-01-01

Internal control is established by the Government to ensure effective and proper operations of ministries, institutions and generally of all public agencies, in compliance with the law, the goals and objectives stated by them, to provide protection against abuse and mismanagement or poor governance. The instrument of internal audit entails a series of mechanisms which aim at enabling budgetary policies compliance, such as: financial reporting; effective system of communication between mana...

Proper motions and distances of quasars

International Nuclear Information System (INIS)

Varshni, Y.P.

1982-01-01

The author's theory that quasars are stars raises the question of their proper motions. From the evidence presented in a previous paper, it is hypothesised that planetary nuclei and quasars are related objects and that their distributions in the galaxy are not very different. Proper motions of 30 quasars, calculated from existing measurements, are discussed. It is shown that three of these, namely PHL 1033, LB 8956 and LB 8991, have proper motions comparable to the largest proper motion known amongst the planetary nuclei. From this it is estimated that these three quasars lie within a few hundred parsecs from the sun. The evidence presented in a previous paper and the present one clearly supports the theory that quasars are stars. The possibility of using the interstellar K and H lines as distance indicators of quasars is discussed and the available evidence summarised. The desirability of determining more accurate values of the proper motions of quasars is emphasised. (Auth.)

Development of an EtherCAT enabled digital servo controller for the Green Bank Telescope

Science.gov (United States)

Whiteis, Peter G.; Mello, Melinda J.

2012-09-01

EtherCAT (Ethernet for Control Automation Technology) is gaining wide spread popularity in the automation industry as a real time field bus based on low cost, Ethernet hardware. EtherCAT maximizes use of 100Mbps Ethernet hardware by using a collision free ring topology, efficient Ethernet frame utilization (> 95%), and data exchange "on the fly". These characteristics enable EtherCAT to achieve Master to Slave node data exchange rates of > 1000 Hz. The Green Bank Telescope, commissioned in 2000, utilizes an analog control system for motion control of 8 elevation and 16 azimuth motors. This architecture, while sufficient for observations at frequencies up to 50GHz, has significant limitations for the current scientific goals of observing at 115GHz. Accordingly, the Green Bank staff has embarked on a servo upgrade project to develop a digital servo system which accommodates development and implementation of advanced control algorithms. This paper describes how the new control system requirements, use of existing infrastructure and budget constraints led us to define a distributed motion control architecture where EtherCAT real-time Ethernet was selected as the communication bus. Finally, design details are provided that describe how NRAO developed a custom EtherCAT-enabled motor controller interface for the GBT's legacy motor drives in order to provide technical benefits and flexibility not available in commercial products.

Export control training - Experience and pedagogical lessons learned

International Nuclear Information System (INIS)

Heine, P.

2013-01-01

This series of slides draws a picture of the training offerings in export control within the framework of the International Nonproliferation Export Control Program. These courses are organized around 3 topics: licensing, enterprise outreach and enforcement. There are about 10 courses, a brief content of their curricula is given. The goal of these courses is not to make participants into export control experts or trade analysts, but enable them to properly take export controls into account. (A.C.)

Self-inflicted skin lesions: the importance of a proper diagnostic and therapeutic approach

Directory of Open Access Journals (Sweden)

Dimitre Dimitrov

2016-12-01

Full Text Available Introduction . Patients with self-inflicted skin lesions (SISL are most often referred to dermatologists. Since psychological and psychiatric conditions might be the underlying reasons for the behavior of these patients, the psychology-associated component should always be kept in mind when approaching such individuals. Objective. To discuss distinctive aspects of the approach towards patients with SISL and emphasize the most relevant issues concerning the management of psychodermatoses. Case report. We present a case of a 13-year-old girl with a 6-month history of skin lesions misdiagnosed as allergic contact dermatitis. Conscientious history taking and physical examination enabled the diagnosis of SISL. Conclusions. The proper approach to patients presenting with psychodermatoses differs from that for other dermatological patients and requires considering several additional aspects. We would like to emphasize the distinguishing aspects and importance of the proper approach to patients with SISL that might aid clinicians in diagnosing and treating these individuals in the future.

Evaluation of Standards for Access Control Enabling PHR-S Federation.

Science.gov (United States)

Mense, Alexander; Urbauer, Philipp; Sauermann, Stefan

2017-01-01

The adoption of the Internet of Things (IoT) and mobile applications in the healthcare may transform the healthcare industry by offering better disease tracking and management as well as patient empowerment. Unfortunately, almost all of these new systems set up their own ecosystem and to be really valuable for the care process they need to be integrated or federated with user managed access control services based on international standards and profiles to enable interoperability. Thus, this work presents the results of an evaluation of available specifications for federated authorization, based on a set of basic requirements.

Towards proper name generation : A corpus analysis

NARCIS (Netherlands)

Castro Ferreira, Thiago; Wubben, Sander; Krahmer, Emiel

We introduce a corpus for the study of proper name generation. The corpus consists of proper name references to people in webpages, extracted from the Wikilinks corpus. In our analyses, we aim to identify the different ways, in terms of length and form, in which a proper names are produced

Robust Control of Wide Bandgap Power Electronics Device Enabled Smart Grid

Science.gov (United States)

Yao, Tong

In recent years, wide bandgap (WBG) devices enable power converters with higher power density and higher efficiency. On the other hand, smart grid technologies are getting mature due to new battery technology and computer technology. In the near future, the two technologies will form the next generation of smart grid enabled by WBG devices. This dissertation deals with two applications: silicon carbide (SiC) device used for medium voltage level interface (7.2 kV to 240 V) and gallium nitride (GaN) device used for low voltage level interface (240 V/120 V). A 20 kW solid state transformer (SST) is designed with 6 kHz switching frequency SiC rectifier. Then three robust control design methods are proposed for each of its smart grid operation modes. In grid connected mode, a new LCL filter design method is proposed considering grid voltage THD, grid current THD and current regulation loop robust stability with respect to the grid impedance change. In grid islanded mode, micro synthesis method combined with variable structure control is used to design a robust controller for grid voltage regulation. For grid emergency mode, multivariable controller designed using Hinfinity synthesis method is proposed for accurate power sharing. Controller-hardware-in-the-loop (CHIL) testbed considering 7-SST system is setup with Real Time Digital Simulator (RTDS). The real TMS320F28335 DSP and Spartan 6 FPGA control board is used to interface a switching model SST in RTDS. And the proposed control methods are tested. For low voltage level application, a 3.3 kW smart grid hardware is built with 3 GaN inverters. The inverters are designed with the GaN device characterized using the proposed multi-function double pulse tester. The inverter is controlled by onboard TMS320F28379D dual core DSP with 200 kHz sampling frequency. Each inverter is tested to process 2.2 kW power with overall efficiency of 96.5 % at room temperature. The smart grid monitor system and fault interrupt devices (FID

PropeR revisited

NARCIS (Netherlands)

van der Linden, Helma; Talmon, Jan; Tange, Huibert; Grimson, Jane; Hasman, Arie

2005-01-01

INTRODUCTION: The PropeR EHR system (PropeRWeb) is a multidisciplinary electronic health record (EHR) system for multidisciplinary use in extramural patient care for stroke patients. DESIGN: The system is built using existing open source components and is based on open standards. It is implemented

Properly colored connectivity of graphs

CERN Document Server

Li, Xueliang; Qin, Zhongmei

2018-01-01

A comprehensive survey of proper connection of graphs is discussed in this book with real world applications in computer science and network security. Beginning with a brief introduction, comprising relevant definitions and preliminary results, this book moves on to consider a variety of properties of graphs that imply bounds on the proper connection number. Detailed proofs of significant advancements toward open problems and conjectures are presented with complete references. Researchers and graduate students with an interest in graph connectivity and colorings will find this book useful as it builds upon fundamental definitions towards modern innovations, strategies, and techniques. The detailed presentation lends to use as an introduction to proper connection of graphs for new and advanced researchers, a solid book for a graduate level topics course, or as a reference for those interested in expanding and further developing research in the area.

Investigating differences between proper and common nouns using novel word learning

Directory of Open Access Journals (Sweden)

Anastasiya Romanova

2014-04-01

the different exemplars of each proper noun sharing more visual features than the different exemplars of each common noun. The two people with aphasia did not show any learning but their performance was not significantly different from the overall performance of elderly controls due to high variability within the latter group. Thus, previously shown difficulty in retrieving proper nouns particularly may be attributed to statistical differences (such as frequency, familiarity and age of acquisition between proper and common nouns. As demonstrated in our study, these statistical properties being equal, no advantage in retrieval is observed for common nouns anymore.

Modal analysis of fluid flows using variants of proper orthogonal decomposition

Science.gov (United States)

Rowley, Clarence; Dawson, Scott

2017-11-01

This talk gives an overview of several methods for analyzing fluid flows, based on variants of proper orthogonal decomposition. These methods may be used to determine simplified, approximate models that capture the essential features of these flows, in order to better understand the dominant physical mechanisms, and potentially to develop appropriate strategies for model-based flow control. We discuss balanced proper orthogonal decomposition as an approximation of balanced truncation, and explain connections with system identification methods such as the eigensystem realization algorithm. We demonstrate the methods on several canonical examples, including a linearized channel flow and the flow past a circular cylinder. Supported by AFOSR, Grant FA9550-14-1-0289.

A Lyapunov theory based UPFC controller for power flow control

Energy Technology Data Exchange (ETDEWEB)

Zangeneh, Ali; Kazemi, Ahad; Hajatipour, Majid; Jadid, Shahram [Center of Excellence for Power Systems Automation and Operation, Iran University of Science and Technology, Tehran (Iran)

2009-09-15

Unified power flow controller (UPFC) is the most comprehensive multivariable device among the FACTS controllers. Capability of power flow control is the most important responsibility of UPFC. According to high importance of power flow control in transmission lines, the proper controller should be robust against uncertainty and disturbance and also have suitable settling time. For this purpose, a new controller is designed based on the Lyapunov theory and its stability is also evaluated. The Main goal of this paper is to design a controller which enables a power system to track reference signals precisely and to be robust in the presence of uncertainty of system parameters and disturbances. The performance of the proposed controller is simulated on a two bus test system and compared with a conventional PI controller. The simulation results show the power and accuracy of the proposed controller. (author)

Limited-memory adaptive snapshot selection for proper orthogonal decomposition

Energy Technology Data Exchange (ETDEWEB)

Oxberry, Geoffrey M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kostova-Vassilevska, Tanya [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Arrighi, Bill [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chand, Kyle [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-04-02

Reduced order models are useful for accelerating simulations in many-query contexts, such as optimization, uncertainty quantification, and sensitivity analysis. However, offline training of reduced order models can have prohibitively expensive memory and floating-point operation costs in high-performance computing applications, where memory per core is limited. To overcome this limitation for proper orthogonal decomposition, we propose a novel adaptive selection method for snapshots in time that limits offline training costs by selecting snapshots according an error control mechanism similar to that found in adaptive time-stepping ordinary differential equation solvers. The error estimator used in this work is related to theory bounding the approximation error in time of proper orthogonal decomposition-based reduced order models, and memory usage is minimized by computing the singular value decomposition using a single-pass incremental algorithm. Results for a viscous Burgers’ test problem demonstrate convergence in the limit as the algorithm error tolerances go to zero; in this limit, the full order model is recovered to within discretization error. The resulting method can be used on supercomputers to generate proper orthogonal decomposition-based reduced order models, or as a subroutine within hyperreduction algorithms that require taking snapshots in time, or within greedy algorithms for sampling parameter space.

Testing of an End-Point Control Unit Designed to Enable Precision Control of Manipulator-Coupled Spacecraft

Science.gov (United States)

Montgomery, Raymond C.; Ghosh, Dave; Tobbe, Patrick A.; Weathers, John M.; Manouchehri, Davoud; Lindsay, Thomas S.

1994-01-01

This paper presents an end-point control concept designed to enable precision telerobotic control of manipulator-coupled spacecraft. The concept employs a hardware unit (end-point control unit EPCU) that is positioned between the end-effector of the Space Shuttle Remote Manipulator System and the payload. Features of the unit are active compliance (control of the displacement between the end-effector and the payload), to allow precision control of payload motions, and inertial load relief, to prevent the transmission of loads between the end-effector and the payload. This paper presents the concept and studies the active compliance feature using a simulation and hardware. Results of the simulation show the effectiveness of the EPCU in smoothing the motion of the payload. Results are presented from initial, limited tests of a laboratory hardware unit on a robotic arm testbed at the l Space Flight Center. Tracking performance of the arm in a constant speed automated retraction and extension maneuver of a heavy payload with and without the unit active is compared for the design speed and higher speeds. Simultaneous load reduction and tracking performance are demonstrated using the EPCU.

PHM Enabled Autonomous Propellant Loading Operations

Science.gov (United States)

Walker, Mark; Figueroa, Fernando

2017-01-01

The utility of Prognostics and Health Management (PHM) software capability applied to Autonomous Operations (AO) remains an active research area within aerospace applications. The ability to gain insight into which assets and subsystems are functioning properly, along with the derivation of confident predictions concerning future ability, reliability, and availability, are important enablers for making sound mission planning decisions. When coupled with software that fully supports mission planning and execution, an integrated solution can be developed that leverages state assessment and estimation for the purposes of delivering autonomous operations. The authors have been applying this integrated, model-based approach to the autonomous loading of cryogenic spacecraft propellants at Kennedy Space Center.

Controlling and optimizing of energy streams in local buildings in a field test

NARCIS (Netherlands)

Bakker, Vincent; Molderink, Albert; Nykamp, Stefan; Hurink, Johann L.; Smit, Gerardus Johannes Maria; Reinelt, Jens

2013-01-01

Demand side management is one of the novel techniques enabled by introducing ICT in the distribution grid. Controllable assets and energy buffers make it possible to maintain a properly functioning grid, improve the efficiency of the grid and prolong the current grid infrastructure. This work

Determination of proper motions in the Pleiades cluster

Science.gov (United States)

Schilbach, E.

1991-04-01

For 458 stars in the Pleiades field from the catalog of Eichhorn et al. (1970) proper motions were derived on Tautenburg and CERGA Schmidt telescope plates measured with the automated measuring machine MAMA in Paris. The catalog positions were considered as first epoch coordinates with an epoch difference of ca. 33 years to the observations. The results show good coincidence of proper motions derived with both Schmidt telescopes within the error bars. Comparison with proper motions determined by Vasilevskis et al. (1979) displays some significant differences but no systematic effects depending on plate coordinates or magnitudes could be found. An accuracy of 0.3 arcsec/100a for one proper motion component was estimated. According to the criterion of common proper motion 34 new cluster members were identified.

On the Determination of Proper Time

OpenAIRE

Hurl, Bing; Zhang, Zhi-Yong Wang Hai-Dong

1998-01-01

Through the analysis of the definition of the duration of proper time of a particle given by the length of its world line, we show that there is no transitivity of the coordinate time function derived from the definition, so there exists an ambiguity in the determination of the duration of the proper time for the particle. Its physical consequence is illustrated with quantum measurement effect.

Paper Capillary Enables Effective Sampling for Microfluidic Paper Analytical Devices.

Science.gov (United States)

Shangguan, Jin-Wen; Liu, Yu; Wang, Sha; Hou, Yun-Xuan; Xu, Bi-Yi; Xu, Jing-Juan; Chen, Hong-Yuan

2018-06-06

Paper capillary is introduced to enable effective sampling on microfluidic paper analytical devices. By coupling mac-roscale capillary force of paper capillary and microscale capillary forces of native paper, fluid transport can be flexibly tailored with proper design. Subsequently, a hybrid-fluid-mode paper capillary device was proposed, which enables fast and reliable sampling in an arrayed form, with less surface adsorption and bias for different components. The resulting device thus well supports high throughput, quantitative, and repeatable assays all by hands operation. With all these merits, multiplex analysis of ions, proteins, and microbe have all been realized on this platform, which has paved the way to level-up analysis on μPADs.

Large proper motions in the Orion nebula

International Nuclear Information System (INIS)

Cudworth, K.M.; Stone, R.C.

1977-01-01

Several nebular features, as well as one faint star, with large proper motions were identified within the Orion nebula. The measured proper motions correspond to tangential velocities of up to approximately 70 km sec -1 . One new probable variable star was also found

Novel sensors to enable closed-loop active clearance control in gas turbine engines

Science.gov (United States)

Geisheimer, Jonathan; Holst, Tom

2014-06-01

Active clearance control within the turbine section of gas turbine engines presents and opportunity within aerospace and industrial applications to improve operating efficiencies and the life of downstream components. Open loop clearance control is currently employed during the development of all new large core aerospace engines; however, the ability to measure the gap between the blades and the case and close down the clearance further presents as opportunity to gain even greater efficiencies. The turbine area is one of the harshest environments for long term placement of a sensor in addition to the extreme accuracy requirements required to enable closed loop clearance control. This paper gives an overview of the challenges of clearance measurements within the turbine as well as discusses the latest developments of a microwave sensor designed for this application.

Computation of Asteroid Proper Elements: Recent Advances

Science.gov (United States)

Knežević, Z.

2017-12-01

The recent advances in computation of asteroid proper elements are briefly reviewed. Although not representing real breakthroughs in computation and stability assessment of proper elements, these advances can still be considered as important improvements offering solutions to some practical problems encountered in the past. The problem of getting unrealistic values of perihelion frequency for very low eccentricity orbits is solved by computing frequencies using the frequency-modified Fourier transform. The synthetic resonant proper elements adjusted to a given secular resonance helped to prove the existence of Astraea asteroid family. The preliminary assessment of stability with time of proper elements computed by means of the analytical theory provides a good indication of their poorer performance with respect to their synthetic counterparts, and advocates in favor of ceasing their regular maintenance; the final decision should, however, be taken on the basis of more comprehensive and reliable direct estimate of their individual and sample average deviations from constancy.

Development of an Ethernet enabled microcontroller based module for Superconducting Cyclotron ECR beam line control

International Nuclear Information System (INIS)

Chatterjee, M.; Koley, D.; Nabhiraj, P.Y.

2012-01-01

An Ethernet enabled control and data acquisition module is developed for remote control and monitoring of the ECR beam line equipment of the Superconducting Cyclotron. The PIC microcontroller based module supports multiple general purpose analog and digital inputs and outputs for interfacing with various equipments and an embedded web server. The remote monitoring and control of the equipment are achieved through the web based user interface. The user authenticated access to control parameters and module configuration parameters ensures the operational safety of the equipment under control. This module is installed in Superconducting Cyclotron ECR beam line for the control and monitoring of vacuum pumping modules, comprising of pumps, gate valves and dual vacuum gauges. The installation of these modules results in a distributed control with localised field cabling and hence better fault diagnosis. (author)

Air Vehicle Technology Integration Program (AVTIP) Delivery Order 0015: Open Control Platform (OCP) Software Enabled Control (SEC) Hardware in the Loop Simulation - OCP Hardware Integration

National Research Council Canada - National Science Library

Paunicka, James L

2005-01-01

...) project sponsored by the DARPA Software Enabled Control (SEC) Program. The purpose of this project is to develop the capability to be an OCP test-bed and to evaluate the OCP controls and simulation environment for a specific test case...

Emission Control Research to Enable Fuel Efficiency: Department of Energy Heavy Vehicle Technologies

International Nuclear Information System (INIS)

Gurpreet Singh; Ronald L. Graves; John M. Storey; William P. Partridge; John F. Thomas; Bernie M. Penetrante; Raymond M. Brusasco; Bernard T. Merritt; George E. Vogtlin; Christopher L. Aardahl; Craig F. Habeger; M.L. Balmer

2000-01-01

The Office of Heavy Vehicle Technologies supports research to enable high-efficiency diesel engines to meet future emissions regulations, thus clearing the way for their use in light trucks as well as continuing as the most efficient powerplant for freight-haulers. Compliance with Tier 2 rules and expected heavy duty engine standards will require effective exhaust emission controls (after-treatment) for diesels in these applications. DOE laboratories are working with industry to improve emission control technologies in projects ranging from application of new diagnostics for elucidating key mechanisms, to development and tests of prototype devices. This paper provides an overview of these R and D efforts, with examples of key findings and developments

Organising to Enable Innovation

DEFF Research Database (Denmark)

Brink, Tove

2016-01-01

The purpose of this conceptual paper is to reveal how organising can enable innovation across organisational layers and organisational units. This approach calls for a cross-disciplinary literature review. The aim is to provide an integrated understanding of innovation in an organisational approach....... The findings reveal a continous organising process between individual/ team creativity and organisational structures/control to enable innovation at firm level. Organising provides a dynamic approach and contains the integrated reconstruction of creativity, structures and boundaries for enhanced balance...... of explorative and exploitative learning in uncertain environments. Shedding light on the cross-disciplinary theories to organise innovation provides a contribution at the firm level to enable innovation....

Cataclysmic variables in the SUPERBLINK proper motion survey

Energy Technology Data Exchange (ETDEWEB)

Skinner, Julie N.; Thorstensen, John R. [Department of Physics and Astronomy, 6127 Wilder Laboratory, Dartmouth College, Hanover, NH 03755-3528 (United States); Lépine, Sébastien, E-mail: jns@dartmouth.edu [Department of Physics and Astronomy, Georgia State University, 25 Park Place NE, Atlanta, GA 30303 (United States)

2014-12-01

We have discovered a new high proper motion cataclysmic variable (CV) in the SUPERBLINK proper motion survey, which is sensitive to stars with proper motions greater than 40 mas yr{sup −1}. This CV was selected for follow-up observations as part of a larger search for CVs selected based on proper motions and their near-UV−V and V−K{sub s} colors. We present spectroscopic observations from the 2.4 m Hiltner Telescope at MDM Observatory. The new CV's orbital period is near 96 minutes, its spectrum shows the double-peaked Balmer emission lines characteristic of quiescent dwarf novae, and its V magnitude is near 18.2. Additionally, we present a full list of known CVs in the SUPERBLINK catalog.

The shared circuits model (SCM): how control, mirroring, and simulation can enable imitation, deliberation, and mindreading.

Science.gov (United States)

Hurley, Susan

2008-02-01

Imitation, deliberation, and mindreading are characteristically human sociocognitive skills. Research on imitation and its role in social cognition is flourishing across various disciplines. Imitation is surveyed in this target article under headings of behavior, subpersonal mechanisms, and functions of imitation. A model is then advanced within which many of the developments surveyed can be located and explained. The shared circuits model (SCM) explains how imitation, deliberation, and mindreading can be enabled by subpersonal mechanisms of control, mirroring, and simulation. It is cast at a middle, functional level of description, that is, between the level of neural implementation and the level of conscious perceptions and intentional actions. The SCM connects shared informational dynamics for perception and action with shared informational dynamics for self and other, while also showing how the action/perception, self/other, and actual/possible distinctions can be overlaid on these shared informational dynamics. It avoids the common conception of perception and action as separate and peripheral to central cognition. Rather, it contributes to the situated cognition movement by showing how mechanisms for perceiving action can be built on those for active perception.;>;>The SCM is developed heuristically, in five layers that can be combined in various ways to frame specific ontogenetic or phylogenetic hypotheses. The starting point is dynamic online motor control, whereby an organism is closely attuned to its embedding environment through sensorimotor feedback. Onto this are layered functions of prediction and simulation of feedback, mirroring, simulation of mirroring, monitored inhibition of motor output, and monitored simulation of input. Finally, monitored simulation of input specifying possible actions plus inhibited mirroring of such possible actions can generate information about the possible as opposed to actual instrumental actions of others, and the

Proper time axis of a closed relativistic system

International Nuclear Information System (INIS)

Chernikov, N.A.; Fadeev, N.G.; Shavokhina, N.S.

1997-01-01

The definition of a proper time axis of a closed relativistic system of colliding particles is given. The solution of the proper time axis problem is presented. If the light velocity c equals the imaginary unit i, then in the case of a plane motion of the system the problem about the proper time axis turns out to be equivalent to the known in engineering mechanics problem about the reduction of any system of forces, applied to a rigid body, to the dynamic screw. In the general case, when c=i, the problem about the proper time axis turns out to be equivalent to the problem about the reduction to the dynamic screw of a system of forces, applied to a rigid body in a four-dimensional Euclidean space

Nanostructure-Enabled and Macromolecule-Grafted Surfaces for Biomedical Applications

Directory of Open Access Journals (Sweden)

Madeline Small

2018-05-01

Full Text Available Advances in nanotechnology and nanomaterials have enabled the development of functional biomaterials with surface properties that reduce the rate of the device rejection in injectable and implantable biomaterials. In addition, the surface of biomaterials can be functionalized with macromolecules for stimuli-responsive purposes to improve the efficacy and effectiveness in drug release applications. Furthermore, macromolecule-grafted surfaces exhibit a hierarchical nanostructure that mimics nanotextured surfaces for the promotion of cellular responses in tissue engineering. Owing to these unique properties, this review focuses on the grafting of macromolecules on the surfaces of various biomaterials (e.g., films, fibers, hydrogels, and etc. to create nanostructure-enabled and macromolecule-grafted surfaces for biomedical applications, such as thrombosis prevention and wound healing. The macromolecule-modified surfaces can be treated as a functional device that either passively inhibits adverse effects from injectable and implantable devices or actively delivers biological agents that are locally based on proper stimulation. In this review, several methods are discussed to enable the surface of biomaterials to be used for further grafting of macromolecules. In addition, we review surface-modified films (coatings and fibers with respect to several biomedical applications. Our review provides a scientific update on the current achievements and future trends of nanostructure-enabled and macromolecule-grafted surfaces in biomedical applications.

Rationale, design features, and baseline characteristics: The Heart Institute of Japan-PRoper level of lipid lOwering with Pitavastatin and Ezetimibe in acute coRonary syndrome (HIJ-PROPER).

Science.gov (United States)

Kawada-Watanabe, Erisa; Ogawa, Hiroshi; Koyanagi, Ryo; Arashi, Hiroyuki; Yamaguchi, Junichi; Matsui, Kunihiko; Hagiwara, Nobuhisa

2017-03-01

In contrast to current guidelines in Western countries, moderate reduction of low-density lipoprotein cholesterol (LDL-C) is recommended for Japanese patients with atherosclerotic cardiovascular disease and dyslipidemia even in secondary prevention. HIJ-PROPER (Heart Institute of Japan-PRoper level of lipid lOwering with Pitavastatin and Ezetimibe in acute coRonary syndrome) is a prospective, randomized, open-label, blinded endpoint multicenter trial designed to assess whether closely controlled LDL-C lowering with a standard statin dose plus ezetimibe, targeting LDL-C of acute coronary syndrome (ACS) and dyslipidemia. We recruited patients with ACS and dyslipidemia who had undergone coronary angiography. Participants are randomly allocated to either intensive LDL-C lowering treatment (target LDL-C of acute MI in 61.5%. This study is expected to report its findings in August 2016. HIJ-PROPER will determine whether targeting LDL-C of <70mg/dL with pitavastatin plus ezetimibe can improve cardiovascular outcomes in Japanese patients with ACS and dyslipidemia in comparison to targeting LDL-C of 90-100mg/dL with standard pitavastatin monotherapy. UMIN000002742. Copyright © 2016 Japanese College of Cardiology. Published by Elsevier Ltd. All rights reserved.

Smart Grid Enabled EVSE

Energy Technology Data Exchange (ETDEWEB)

None, None

2015-01-12

The combined team of GE Global Research, Federal Express, National Renewable Energy Laboratory, and Consolidated Edison has successfully achieved the established goals contained within the Department of Energy’s Smart Grid Capable Electric Vehicle Supply Equipment funding opportunity. The final program product, shown charging two vehicles in Figure 1, reduces by nearly 50% the total installed system cost of the electric vehicle supply equipment (EVSE) as well as enabling a host of new Smart Grid enabled features. These include bi-directional communications, load control, utility message exchange and transaction management information. Using the new charging system, Utilities or energy service providers will now be able to monitor transportation related electrical loads on their distribution networks, send load control commands or preferences to individual systems, and then see measured responses. Installation owners will be able to authorize usage of the stations, monitor operations, and optimally control their electricity consumption. These features and cost reductions have been developed through a total system design solution.

TOWARDS PROPER CULTURAL RESOURCE MANAGEMENT ...

African Journals Online (AJOL)

GRACE

proper harnessing and management of cultural resources in Nigeria for sustainable development .... and knowledge) to organize the resources available to man with the aim of optimizing their use in the ... needs‖ (World Bank 1992). Thus, as ...

Proper Islamic Consumption

DEFF Research Database (Denmark)

Fischer, Johan

mobile, religiously committed communities to the opportunities and perils presented by modernisation. It also tells us something about the debates concerning the meanings and practices of Islam within an aggressive, globalised, secularised modernity. In Malaysia this is an especially intriguing issue...... spite of a long line of social theory analyzing the spiritual in the economic, and vice versa, very little of the recent increase in scholarship on Islam addresses its relationship with capitalism. Johan Fischer’s book,Proper Islamic Consumption, begins to fill this gap. […] Fischer’s detailed...

Laser printing of nanoparticle toner enables digital control of micropatterned carbon nanotube growth.

Science.gov (United States)

Polsen, Erik S; Stevens, Adam G; Hart, A John

2013-05-01

Commercialization of materials utilizing patterned carbon nanotube (CNT) forests, such as hierarchical composite structures, dry adhesives, and contact probe arrays, will require catalyst patterning techniques that do not rely on cleanroom photolithography. We demonstrate the large scale patterning of CNT growth catalyst via adaptation of a laser-based electrostatic printing process that uses magnetic ink character recognition (MICR) toner. The MICR toner contains iron oxide nanoparticles that serve as the catalyst for CNT growth, which are printed onto a flexible polymer (polyimide) and then transferred to a rigid substrate (silicon or alumina) under heat and mechanical pressure. Then, the substrate is processed for CNT growth under an atmospheric pressure chemical vapor deposition (CVD) recipe. This process enables digital control of patterned CNT growth via the laser intensity, which controls the CNT density; and via the grayscale level, which controls the pixelation of the image into arrays of micropillars. Moreover, virtually any pattern can be designed using standard software (e.g., MS Word, AutoCAD, etc.) and printed on demand. Using a standard office printer, we realize isolated CNT microstructures as small as 140 μm and isolated catalyst ″pixels″ as small as 70 μm (one grayscale dot) and determine that individual toner microparticles result in features of approximately 5-10 μm . We demonstrate that grayscale CNT patterns can function as dry adhesives and that large-area catalyst patterns can be printed directly onto metal foils or transferred to ceramic plates. Laser printing therefore shows promise to enable high-speed micropatterning of nanoparticle-containing thin films under ambient conditions, possibly for a wide variety of nanostructures by engineering of toners containing nanoparticles of desired composition, size, and shape.

INTERNAL PROPER MOTIONS IN THE ESKIMO NEBULA

International Nuclear Information System (INIS)

García-Díaz, Ma. T.; Gutiérrez, L.; Steffen, W.; López, J. A.; Beckman, J.

2015-01-01

We present measurements of internal proper motions at more than 500 positions of NGC 2392, the Eskimo Nebula, based on images acquired with WFPC2 on board the Hubble Space Telescope at two epochs separated by 7.695 yr. Comparisons of the two observations clearly show the expansion of the nebula. We measured the amplitude and direction of the motion of local structures in the nebula by determining their relative shift during that interval. In order to assess the potential uncertainties in the determination of proper motions in this object, in general, the measurements were performed using two different methods, used previously in the literature. We compare the results from the two methods, and to perform the scientific analysis of the results we choose one, the cross-correlation method, because it is more reliable. We go on to perform a ''criss-cross'' mapping analysis on the proper motion vectors, which helps in the interpretation of the velocity pattern. By combining our results of the proper motions with radial velocity measurements obtained from high resolution spectroscopic observations, and employing an existing 3D model, we estimate the distance to the nebula to be 1.3 kpc

INTERNAL PROPER MOTIONS IN THE ESKIMO NEBULA

Energy Technology Data Exchange (ETDEWEB)

García-Díaz, Ma. T.; Gutiérrez, L.; Steffen, W.; López, J. A. [Instituto de Astronomía, Universidad Nacional Autónoma de México, Km 103 Carretera Tijuana-Ensenada, 22860 Ensenada, B.C. (Mexico); Beckman, J., E-mail: tere@astro.unam.mx, E-mail: leonel@astro.unam.mx, E-mail: wsteffen@astro.unam.mx, E-mail: jal@astro.unam.mx, E-mail: jeb@iac.es [Instituto de Astrofísica de Canarias, La Laguna, Tenerife (Spain)

2015-01-10

We present measurements of internal proper motions at more than 500 positions of NGC 2392, the Eskimo Nebula, based on images acquired with WFPC2 on board the Hubble Space Telescope at two epochs separated by 7.695 yr. Comparisons of the two observations clearly show the expansion of the nebula. We measured the amplitude and direction of the motion of local structures in the nebula by determining their relative shift during that interval. In order to assess the potential uncertainties in the determination of proper motions in this object, in general, the measurements were performed using two different methods, used previously in the literature. We compare the results from the two methods, and to perform the scientific analysis of the results we choose one, the cross-correlation method, because it is more reliable. We go on to perform a ''criss-cross'' mapping analysis on the proper motion vectors, which helps in the interpretation of the velocity pattern. By combining our results of the proper motions with radial velocity measurements obtained from high resolution spectroscopic observations, and employing an existing 3D model, we estimate the distance to the nebula to be 1.3 kpc.

Proper laboratory notebook practices: protecting your intellectual property.

Science.gov (United States)

Nickla, Jason T; Boehm, Matthew B

2011-03-01

A laboratory notebook contains a wealth of knowledge that can be critical for establishing evidence in support of intellectual property rights and for refuting claims of research misconduct. The proper type, organization, use, maintenance, and storage of laboratory notebooks should be a priority for everyone at research institutions. Failure to properly document research activities can lead to serious problems, including the loss of valuable patent rights. Consequences of improper laboratory notebook practices can be harsh; numerous examples are described in court cases and journal articles, indicating a need for research institutions to develop strict policies on the proper use and storage of research documentation.

Comparison of Methods of Teaching Children Proper Lifting ...

African Journals Online (AJOL)

Objective: This study was designed to determine the effects of three teaching methods on children\\'s ability to demonstrate and recall their mastery of proper lifting techniques. Method: Ninety-three primary five and six public school children who had no knowledge of proper lifting technique were assigned into three equal ...

Fast digital feedback control systems for accelerator RF system using FPGA

International Nuclear Information System (INIS)

Bagduwal, Pritam Singh; Sharma, Dheeraj; Tiwari, Nitesh; Lad, M.; Hannurkar, P.R.

2012-01-01

Feedback control system plays important role for proper injection and acceleration of beam in particle accelerators by providing the required amplitude and phase stability of RF fields in accelerating structures. Advancement in the field of digital technology enables us to develop fast digital feedback control system for RF applications. Digital Low Level RF (LLRF) system offers the inherent advantages of Digital System like flexibility, adaptability, good repeatability and reduced long time drift errors compared to analog system. To implement the feedback control algorithm, I/Q control scheme is used. By properly sampling the down converted IF signal using fast ADC we get accurate feedback signal and also eliminates the need of two separate detectors for amplitude and phase detection. Controller is implemented in Vertex-4 FPGA. Codes for control algorithms which controls the amplitude and phase in all four quadrants with good accuracy are written in the VHDL. I/Q modulator works as common actuator for both amplitude and phase correction. Synchronization between RF, LO and ADC clock is indispensable and has been achieved by deriving the clock and LO signal from RF signal itself. Control system has been successfully tested in lab with phase and amplitude stability better then ±1% and ±1° respectively. High frequency RF signal is down converted to IF using the super heterodyne technique. Super heterodyne principal not only brings the RF signal to the Low IF frequency at which it can be easily processed but also enables us to use the same hardware and software for other RF frequencies with some minor modification. (author)

Archetypes: the PropeR way

NARCIS (Netherlands)

van der Linden, Helma; Grimson, Jane; Tange, Huibert; Talmon, Jan; Hasman, Arie

2004-01-01

The PropeR project studies the effect of Decision Support in an Electronic Health Record system (EHR) on the quality of care. One of the applications supports a multidisciplinary primary care team rehabilitating stroke patients in their home environment. This project required an EHR system that

Fundamental Research Applied To Enable Hardware Performance in Microgravity

Science.gov (United States)

Sheredy, William A.

2005-01-01

NASA sponsors microgravity research to generate knowledge in physical sciences. In some cases, that knowledge must be applied to enable future research. This article describes one such example. The Dust and Aerosol measurement Feasibility Test (DAFT) is a risk-mitigation experiment developed at the NASA Glenn Research Center by NASA and ZIN Technologies, Inc., in support of the Smoke Aerosol Measurement Experiment (SAME). SAME is an investigation that is being designed for operation in the Microgravity Science Glovebox aboard the International Space Station (ISS). The purpose of DAFT is to evaluate the performance of P-Trak (TSI Incorporated, Shoreview, MN)--a commercially available condensation nuclei counter and a key SAME diagnostic- -in long-duration microgravity because of concerns about its ability to operate properly in that environment. If its microgravity performance is proven, this device will advance the state of the art in particle measurement capabilities for space vehicles and facilities, such as aboard the ISS. The P-Trak, a hand-held instrument, can count individual particles as small as 20 nm in diameter in an aerosol stream. Particles are drawn into the device by a built-in suction pump. Upon entering the instrument, these particles pass through a saturator tube where they mix with an alcohol vapor (see the following figure). This mixture then flows through a cooled condenser tube where some of the alcohol condenses onto the sample particles, and the droplets grow in a controlled fashion until they are large enough to be counted. These larger droplets pass through an internal nozzle and past a focused laser beam, producing flashes of light that are sensed by a photodetector and then counted to determine particle number concentration. The operation of the instrument depends on the proper internal flow and recycling of isopropyl alcohol in both the vapor and liquid phases.

Smarandachely Adjacent-Vertex-Distinguishing Proper Edge Chromatic Number of Cm∨Kn

OpenAIRE

Shunqin Liu

2016-01-01

According to different conditions, researchers have defined a great deal of coloring problems and the corresponding chromatic numbers. Such as, adjacent-vertex-distinguishing total chromatic number, adjacent-vertex-distinguishing proper edge chromatic number, smarandachely-adjacent-vertex-distinguishing proper edge chromatic number, smarandachely-adjacent-vertex-distinguishing proper total chromatic number. And we focus on the smarandachely adjacent-vertex-distinguishing proper edge chromatic...

Oxygen-enabled control of Dzyaloshinskii-Moriya Interaction in ultra-thin magnetic films

KAUST Repository

Belabbes, Abderrezak

2016-04-22

The search for chiral magnetic textures in systems lacking spatial inversion symmetry has attracted a massive amount of interest in the recent years with the real space observation of novel exotic magnetic phases such as skyrmions lattices, but also domain walls and spin spirals with a defined chirality. The electrical control of these textures offers thrilling perspectives in terms of fast and robust ultrahigh density data manipulation. A powerful ingredient commonly used to stabilize chiral magnetic states is the so-called Dzyaloshinskii-Moriya interaction (DMI) arising from spin-orbit coupling in inversion asymmetric magnets. Such a large antisymmetric exchange has been obtained at interfaces between heavy metals and transition metal ferromagnets, resulting in spin spirals and nanoskyrmion lattices. Here, using relativistic first-principles calculations, we demonstrate that the magnitude and sign of DMI can be entirely controlled by tuning the oxygen coverage of the magnetic film, therefore enabling the smart design of chiral magnetism in ultra-thin films. We anticipate that these results extend to other electronegative ions and suggest the possibility of electrical tuning of exotic magnetic phases.

Precise control of lycopene production to enable a fast-responding, minimal-equipment biosensor.

Science.gov (United States)

McNerney, Monica P; Styczynski, Mark P

2017-09-01

Pigmented metabolites have great potential for use in biosensors that target low-resource areas, since sensor output can be interpreted without any equipment. However, full repression of pigment production when undesired is challenging, as even small amounts of enzyme can catalyze the production of large, visible amounts of pigment. The red pigment lycopene could be particularly useful because of its position in the multi-pigment carotenoid pathway, but commonly used inducible promoter systems cannot repress lycopene production. In this paper, we designed a system that could fully repress lycopene production in the absence of an inducer and produce visible lycopene within two hours of induction. We engineered Lac, Ara, and T7 systems to be up to 10 times more repressible, but these improved systems could still not fully repress lycopene. Translational modifications proved much more effective in controlling lycopene. By decreasing the strength of the ribosomal binding sites on the crtEBI genes, we enabled full repression of lycopene and production of visible lycopene in 3-4h of induction. Finally, we added the mevalonate pathway enzymes to increase the rate of lycopene production upon induction and demonstrated that supplementation of metabolic precursors could decrease the time to coloration to about 1.5h. In total, this represents over an order of magnitude reduction in response time compared to the previously reported strategy. The approaches used here demonstrate the disconnect between fluorescent and metabolite reporters, help enable the use of lycopene as a reporter, and are likely generalizable to other systems that require precise control of metabolite production. Copyright © 2017 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Serial correlation of quality control data--on the use of proper control charts

DEFF Research Database (Denmark)

Winkel, P; Zhang, Nevin

2004-01-01

Biochemical quality control (QC) data have been reported to be autocorrelated. Serial correlation may increase the rate of false alarms if the traditional exponentially weighted moving average (EWMA) control chart to monitoring the process mean is used. False alarms are the focus of this paper, w......, where an alarm is defined as the occurrence of a QC value outside the three standard deviation control limits....

Serial correlation of quality control data--on the use of proper control charts

DEFF Research Database (Denmark)

Winkel, P; Zhang, Nevin

2004-01-01

Biochemical quality control (QC) data have been reported to be autocorrelated. Serial correlation may increase the rate of false alarms if the traditional exponentially weighted moving average (EWMA) control chart to monitoring the process mean is used. False alarms are the focus of this paper......, where an alarm is defined as the occurrence of a QC value outside the three standard deviation control limits....

The Southern Proper Motion Program. IV. The SPM4 Catalog

Science.gov (United States)

Girard, Terrence M.; van Altena, William F.; Zacharias, Norbert; Vieira, Katherine; Casetti-Dinescu, Dana I.; Castillo, Danilo; Herrera, David; Lee, Young Sun; Beers, Timothy C.; Monet, David G.; López, Carlos E.

2011-07-01

We present the fourth installment of the Yale/San Juan Southern Proper Motion Catalog, SPM4. The SPM4 contains absolute proper motions, celestial coordinates, and B, V photometry for over 103 million stars and galaxies between the south celestial pole and -20° declination. The catalog is roughly complete to V = 17.5 and is based on photographic and CCD observations taken with the Yale Southern Observatory's double astrograph at Cesco Observatory in El Leoncito, Argentina. The proper-motion precision, for well-measured stars, is estimated to be 2-3 mas yr-1, depending on the type of second-epoch material. At the bright end, proper motions are on the International Celestial Reference System by way of Hipparcos Catalog stars, while the faint end is anchored to the inertial system using external galaxies. Systematic uncertainties in the absolute proper motions are on the order of 1 mas yr-1.

Detection device for control rod interference

International Nuclear Information System (INIS)

Saito, Noboru.

1984-01-01

Purpose: To enable to detect the mechanical interference or friction between a control rod and a channel box automatically, simply and rapidly. Constitution: A signal from a gate circuit and a signal from a comparison mechanism are inputted into an AND circuit if a control rod has not been displaced by a predetermined distance within a prescribed time Δt after the output of an insertion or withdrawal signal for the control rod, by which a control-rod-interference signal is outputted from the AND circuit. Accordingly, the interference between the control rod and the channel box can be detected automatically, easily and rapidly. Furthermore, by properly adjusting the prescribed time Δt set by the gate circuit, the degree of the interference can also be detected, whereby the safety and the reliability of the reactor can be improved significantly. (Horiuchi, T.)

Enabling Patient Control of Personal Electronic Health Records Through Distributed Ledger Technology.

Science.gov (United States)

Cunningham, James; Ainsworth, John

2017-01-01

The rise of distributed ledger technology, initiated and exemplified by the Bitcoin blockchain, is having an increasing impact on information technology environments in which there is an emphasis on trust and security. Management of electronic health records, where both conformation to legislative regulations and maintenance of public trust are paramount, is an area where the impact of these new technologies may be particularly beneficial. We present a system that enables fine-grained personalized control of third-party access to patients' electronic health records, allowing individuals to specify when and how their records are accessed for research purposes. The use of the smart contract based Ethereum blockchain technology to implement this system allows it to operate in a verifiably secure, trustless, and openly auditable environment, features crucial to health information systems moving forward.

What can Gaia proper motions tell us about Milky Way dwarf galaxies?

NARCIS (Netherlands)

Jin, S.; Helmi, A.; Breddels, M.

We present a proper-motion study on models of the dwarf spheroidal galaxy Sculptor, based on the predicted proper-motion accuracy of Gaia measurements. Gaia will measure proper motions of several hundreds of stars for a Sculptor-like system. Even with an uncertainty on the proper motion of order 1.5

5 CFR 2635.205 - Proper disposition of prohibited gifts.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Proper disposition of prohibited gifts... STANDARDS OF ETHICAL CONDUCT FOR EMPLOYEES OF THE EXECUTIVE BRANCH Gifts From Outside Sources § 2635.205 Proper disposition of prohibited gifts. (a) An employee who has received a gift that cannot be accepted...

Nonparametric Online Learning Control for Soft Continuum Robot: An Enabling Technique for Effective Endoscopic Navigation

Science.gov (United States)

Lee, Kit-Hang; Fu, Denny K.C.; Leong, Martin C.W.; Chow, Marco; Fu, Hing-Choi; Althoefer, Kaspar; Sze, Kam Yim; Yeung, Chung-Kwong

2017-01-01

Abstract Bioinspired robotic structures comprising soft actuation units have attracted increasing research interest. Taking advantage of its inherent compliance, soft robots can assure safe interaction with external environments, provided that precise and effective manipulation could be achieved. Endoscopy is a typical application. However, previous model-based control approaches often require simplified geometric assumptions on the soft manipulator, but which could be very inaccurate in the presence of unmodeled external interaction forces. In this study, we propose a generic control framework based on nonparametric and online, as well as local, training to learn the inverse model directly, without prior knowledge of the robot's structural parameters. Detailed experimental evaluation was conducted on a soft robot prototype with control redundancy, performing trajectory tracking in dynamically constrained environments. Advanced element formulation of finite element analysis is employed to initialize the control policy, hence eliminating the need for random exploration in the robot's workspace. The proposed control framework enabled a soft fluid-driven continuum robot to follow a 3D trajectory precisely, even under dynamic external disturbance. Such enhanced control accuracy and adaptability would facilitate effective endoscopic navigation in complex and changing environments. PMID:29251567

Rhizobacteria in mycorrhizosphere improved plant health and yield of banana by offering proper nourishment and protection against diseases.

Science.gov (United States)

Phirke, Niteen V; Kothari, Raman M; Chincholkar, Sudhir B

2008-12-01

The corporate R&D banana orchards of Musa paradisiaca (dwarf Cavendish AAA, var. shrimanti) on a medium black alluvial soil with low nutrients harboured diversified species of vesicular-arbuscular mycorrhizal (VAM) fungi. These fungi infected the roots severely (69.2%), showed elevated (69.8 g(-1) soil) spore density, increased soil bacterial density (245 x 10(8) cfu g(-1)), produced siderophores (58.2%) and reduced nematode population (2.3 g(-1)) in the mycorrhizosphere of plants for integrated plant nutrition management (IPNM) system as compared to traditional treatment of applying chemical fertilisers alone and other test treatments. The interactions of plant roots with native VAM and local and applied rhizobacteria in the matrix of soil conditioner enabled proper nourishment and protection of crop in IPNM treatment as compared to traditional way. Hence, exploitation of plant growth promoting rhizobacteria through judiciously designed IPNM system revealed the (a) relatively increased banana productivity (21.6%, 76 MT ha(-1)), (b) least occurrence of fusarial wilt and negligible evidence of Sigatoka, (c) saving of 50% chemical fertilisers and (d) permitted control over soil fertility in producer's favour over traditional cultivation practices. These findings are discussed in detail.

Research on orbit prediction for solar-based calibration proper satellite

Science.gov (United States)

Chen, Xuan; Qi, Wenwen; Xu, Peng

2018-03-01

Utilizing the mathematical model of the orbit mechanics, the orbit prediction is to forecast the space target's orbit information of a certain time based on the orbit of the initial moment. The proper satellite radiometric calibration and calibration orbit prediction process are introduced briefly. On the basis of the research of the calibration space position design method and the radiative transfer model, an orbit prediction method for proper satellite radiometric calibration is proposed to select the appropriate calibration arc for the remote sensor and to predict the orbit information of the proper satellite and the remote sensor. By analyzing the orbit constraint of the proper satellite calibration, the GF-1solar synchronous orbit is chose as the proper satellite orbit in order to simulate the calibration visible durance for different satellites to be calibrated. The results of simulation and analysis provide the basis for the improvement of the radiometric calibration accuracy of the satellite remote sensor, which lays the foundation for the high precision and high frequency radiometric calibration.

Globular Clusters: Absolute Proper Motions and Galactic Orbits

Science.gov (United States)

Chemel, A. A.; Glushkova, E. V.; Dambis, A. K.; Rastorguev, A. S.; Yalyalieva, L. N.; Klinichev, A. D.

2018-04-01

We cross-match objects from several different astronomical catalogs to determine the absolute proper motions of stars within the 30-arcmin radius fields of 115 Milky-Way globular clusters with the accuracy of 1-2 mas yr-1. The proper motions are based on positional data recovered from the USNO-B1, 2MASS, URAT1, ALLWISE, UCAC5, and Gaia DR1 surveys with up to ten positions spanning an epoch difference of up to about 65 years, and reduced to Gaia DR1 TGAS frame using UCAC5 as the reference catalog. Cluster members are photometrically identified by selecting horizontal- and red-giant branch stars on color-magnitude diagrams, and the mean absolute proper motions of the clusters with a typical formal error of about 0.4 mas yr-1 are computed by averaging the proper motions of selected members. The inferred absolute proper motions of clusters are combined with available radial-velocity data and heliocentric distance estimates to compute the cluster orbits in terms of the Galactic potential models based on Miyamoto and Nagai disk, Hernquist spheroid, and modified isothermal dark-matter halo (axisymmetric model without a bar) and the same model + rotating Ferre's bar (non-axisymmetric). Five distant clusters have higher-than-escape velocities, most likely due to large errors of computed transversal velocities, whereas the computed orbits of all other clusters remain bound to the Galaxy. Unlike previously published results, we find the bar to affect substantially the orbits of most of the clusters, even those at large Galactocentric distances, bringing appreciable chaotization, especially in the portions of the orbits close to the Galactic center, and stretching out the orbits of some of the thick-disk clusters.

Characterizations of proper actions

Science.gov (United States)

Biller, Harald

2004-03-01

Three kinds of proper actions of increasing strength are defined. We prove that the three definitions specialize to the definitions by Bourbaki, by Palais and by Baum, Connes and Higson in their respective settings. The third of these, which thus turns out to be the strongest, originally only concerns actions of second countable locally compact groups on metrizable spaces. In this situation, it is shown to coincide with the other two definitions if the total space locally has the Lindelöf property and the orbit space is regular.

Asteroid proper elements from an analytical second order theory

International Nuclear Information System (INIS)

Knezevic, Z.; Milani, A.

1989-01-01

The authors have computed by a fully analytical method a new set of proper elements for 3322 numbered main-belt asteroids. They are presented in the following format: asteroid number, proper semimajor axis (AU), proper eccentricity, sine of proper inclination and quality code (see below). This new set is significantly more accurate than all the previous ones at low to moderate eccentricities and inclinations, and especially near the main mean-motion resonances (e.g., the Themis region). This is because the short periodic perturbations are rigorously removed, and the main effects of the second-order (containing the square of the ratio [the mass of Jupiter/mass of the Sun]) are accounted for. Effects arising from the terms in the Hamiltonian of degree up to four in the eccentricity and inclination of both the asteroid and Jupiter are taken into account, and the fundamental frequencies g (for the perihelion) and s(for the node) of the asteroid are computed with a interative algorithm consistent with the basic results of modern dynamics (e.g., Kolmogorov-Arnold-Moser theory)

The design and operation of the slow controls for the DELPHI experiment at LEP

International Nuclear Information System (INIS)

Adye, T.J.; Augustinus, A.; Doenszelmann, M.; Rovelli, T.; Sekulin, R.L.; Smith, G.R.

1994-01-01

The slow controls of the DELPHI detector enable a single operator to oversee the proper functioning of the apparatus and to diagnose faults as they occur. The hardware and software of this system, as well as their interface to the experiment and the operator, are described. Finally, we attempt to draw some conclusions from seven years' design work and the initial four years' operation of DELPHI. ((orig.))

The design and operation of the slow controls for the DELPHI experiment at LEP

International Nuclear Information System (INIS)

Adye, T.J.; Sekulin, R.L.; Smith, G.R.; Augustinus, A.; Rovelli, T.

1994-03-01

The slow controls of the DELPHI detector enable a single operator to oversee the proper functioning of the apparatus and to diagnose faults as they occur. The hardware and software of this system, as well as their interface to the experiment and the operator, are described. Finally, we attempt to draw some conclusions from seven years' design work and the initial four years' operation of DELPHI. (author)

Enablers and barriers for women with gestational diabetes mellitus to achieve optimal glycaemic control - a qualitative study using the theoretical domains framework.

Science.gov (United States)

Martis, Ruth; Brown, Julie; McAra-Couper, Judith; Crowther, Caroline A

2018-04-11

Glycaemic target recommendations vary widely between international professional organisations for women with gestational diabetes mellitus (GDM). Some studies have reported women's experiences of having GDM, but little is known how this relates to their glycaemic targets. The aim of this study was to identify enablers and barriers for women with GDM to achieve optimal glycaemic control. Women with GDM were recruited from two large, geographically different, hospitals in New Zealand to participate in a semi-structured interview to explore their views and experiences focusing on enablers and barriers to achieving optimal glycaemic control. Final thematic analysis was performed using the Theoretical Domains Framework. Sixty women participated in the study. Women reported a shift from their initial negative response to accepting their diagnosis but disliked the constant focus on numbers. Enablers and barriers were categorised into ten domains across the three study questions. Enablers included: the ability to attend group teaching sessions with family and hear from women who have had GDM; easy access to a diabetes dietitian with diet recommendations tailored to a woman's context including ethnic food and financial considerations; free capillary blood glucose (CBG) monitoring equipment, health shuttles to take women to appointments; child care when attending clinic appointments; and being taught CBG testing by a community pharmacist. Barriers included: lack of health information, teaching sessions, consultations, and food diaries in a woman's first language; long waiting times at clinic appointments; seeing a different health professional every clinic visit; inconsistent advice; no tailored physical activities assessments; not knowing where to access appropriate information on the internet; unsupportive partners, families, and workplaces; and unavailability of social media or support groups for women with GDM. Perceived judgement by others led some women only to share

Dynamical systems of proper characteristic 0

International Nuclear Information System (INIS)

Ahmad, K.H.; Hamoui, A.

1991-07-01

Flows with orbits of proper characteristics 0 exhibit recurrent behaviour, a feature of basic importance in the description of their dynamics. Here, we analyze flows with such orbits relating them with recurrent flows and with flows that exhibit orbital, Poisson or Lagrange stability. (author). 11 refs

Strategy Guideline: Proper Water Heater Selection

Energy Technology Data Exchange (ETDEWEB)

Hoeschele, M. [Alliance for Residential Building Innovation, Davis, CA (United States); Springer, D. [Alliance for Residential Building Innovation, Davis, CA (United States); German, A. [Alliance for Residential Building Innovation, Davis, CA (United States); Staller, J. [Alliance for Residential Building Innovation, Davis, CA (United States); Zhang, Y. [Alliance for Residential Building Innovation, Davis, CA (United States)

2015-04-01

This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Strategy Guideline. Proper Water Heater Selection

Energy Technology Data Exchange (ETDEWEB)

Hoeschele, M. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Springer, D. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); German, A. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Staller, J. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Zhang, Y. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

2015-04-09

This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

Flow Control Enabled Aircraft Design

National Research Council Canada - National Science Library

Nangia, Rajendar

2004-01-01

...: Many future advanced aircraft concepts being considered by the Air Force fall outside the current aerodynamic design practice and will rely heavily on the use of flow control technology to optimize flight performance...

Arbitrary beam control using passive lossless metasurfaces enabled by orthogonally polarized custom surface waves

Science.gov (United States)

Kwon, Do-Hoon; Tretyakov, Sergei A.

2018-01-01

For passive, lossless impenetrable metasurfaces, a design technique for arbitrary beam control of receiving, guiding, and launching is presented. Arbitrary control is enabled by a custom surface wave in an orthogonal polarization such that its addition to the incident (input) and the desired scattered (output) fields is supported by a reactive surface impedance everywhere on the reflecting surface. Such a custom surface wave (SW) takes the form of an evanescent wave propagating along the surface with a spatially varying envelope. A growing SW appears when an illuminating beam is received. The SW amplitude stays constant when power is guided along the surface. The amplitude diminishes as a propagating wave (PW) is launched from the surface as a leaky wave. The resulting reactive tensor impedance profile may be realized as an array of anisotropic metallic resonators printed on a grounded dielectric substrate. Illustrative design examples of a Gaussian beam translator-reflector, a probe-fed beam launcher, and a near-field focusing lens are provided.

Computation of Asteroid Proper Elements on the Grid

Science.gov (United States)

Novakovic, B.; Balaz, A.; Knezevic, Z.; Potocnik, M.

2009-12-01

A procedure of gridification of the computation of asteroid proper orbital elements is described. The need to speed up the time consuming computations and make them more efficient is justified by the large increase of observational data expected from the next generation all sky surveys. We give the basic notion of proper elements and of the contemporary theories and methods used to compute them for different populations of objects. Proper elements for nearly 70,000 asteroids are derived since the beginning of use of the Grid infrastructure for the purpose. The average time for the catalogs update is significantly shortened with respect to the time needed with stand-alone workstations. We also present basics of the Grid computing, the concepts of Grid middleware and its Workload management system. The practical steps we undertook to efficiently gridify our application are described in full detail. We present the results of a comprehensive testing of the performance of different Grid sites, and offer some practical conclusions based on the benchmark results and on our experience. Finally, we propose some possibilities for the future work.

Proper Names in Dialectal Idioms: Stages of Idiomatization

Directory of Open Access Journals (Sweden)

Ekaterina S. Kogan

2014-06-01

Full Text Available The article deals with the functioning of proper names (both personal and place names and their derivatives in dialectal idioms. Based upon the criteria of the establishing of the idiomatic status of word combinations, traditionally used in contemporary lexicology, the author marks out four stages of the entry of units containing proper names and their derivatives into a regional idiomatic inventory: 1 word combinations with figurative meanings and transparent motivation easily decoded by every member of the local community (e. g., naryaditsa kak Anisya Klimovskaya ‘to be slovenly dressed’; 2 word combinations with a proper name localizing a nationally known idiom (e. g., zhelninsky telyonok ‘screaming person’; 3 word combinations including a name with a general meaning (e. g., Masha s Yashey ‘two inseparable persons’; 4 idioms with non-transparent motivation (e. g., tutursky pop ‘cuckoo male’. The analyzed data are retrieved from dialect dictionaries (including those of idioms and notes made by the Ural Federal University Toponymic Expeditions in Kostroma Region in 2011–2013.

Fast algorithms for finding proper strategies in game trees

DEFF Research Database (Denmark)

Miltersen, Peter Bro; Sørensen, Troels Bjerre

2008-01-01

We show how to find a normal form proper equilibrium in behavior strategies of a given two-player zero-sum extensive form game with imperfect information but perfect recall. Our algorithm solves a finite sequence of linear programs and runs in polynomial time. For the case of a perfect information...... game, we show how to find a normal form proper equilibrium in linear time by a simple backwards induction procedure....

Determination of Proper Austenitization Temperatures for Hot Stamping of AISI 4140 Steel

Science.gov (United States)

Samadian, Pedram; Parsa, Mohammad Habibi; Shakeri, Amid

2014-04-01

High strength steels are desirable materials for use in automobile bodies in order to reduce vehicle weight and increase the safety of car passengers, but steel grades with high strength commonly show poor formability. Recently, steels with controlled microstructures and compositions are used to gain adequate strength after hot stamping while maintaining good formability during processing. In this study, microstructure evolutions and changes in mechanical properties of AISI 4140 steel sheets resulting from the hot stamping process at different austenitization temperatures were investigated. To determine the proper austenitization temperatures, the results were compared with those of the cold-worked and cold-worked plus quench-tempered specimens. Comparisons showed that the austenitization temperatures of 1000 and 1100 °C are proper for hot stamping of 3-mm-thick AISI 4140 steel sheets due to the resultant martensitic microstructure which led to the yield and ultimate tensile strength of 1.3 and 2.1 GPa, respectively. Such conditions resulted in more favorable simultaneous strength and elongation than those of hot-stamped conventional boron steels.

The CARIBU EBIS control and synchronization system

Science.gov (United States)

Dickerson, Clayton; Peters, Christopher

2015-01-01

The Californium Rare Isotope Breeder Upgrade (CARIBU) Electron Beam Ion Source (EBIS) charge breeder has been built and tested. The bases of the CARIBU EBIS electrical system are four voltage platforms on which both DC and pulsed high voltage outputs are controlled. The high voltage output pulses are created with either a combination of a function generator and a high voltage amplifier, or two high voltage DC power supplies and a high voltage solid state switch. Proper synchronization of the pulsed voltages, fundamental to optimizing the charge breeding performance, is achieved with triggering from a digital delay pulse generator. The control system is based on National Instruments realtime controllers and LabVIEW software implementing Functional Global Variables (FGV) to store and access instrument parameters. Fiber optic converters enable network communication and triggering across the platforms.

The CARIBU EBIS control and synchronization system

Energy Technology Data Exchange (ETDEWEB)

Dickerson, Clayton, E-mail: cdickerson@anl.gov; Peters, Christopher, E-mail: cdickerson@anl.gov [Argonne National Laboratory, Argonne, IL 60439 (United States)

2015-01-09

The Californium Rare Isotope Breeder Upgrade (CARIBU) Electron Beam Ion Source (EBIS) charge breeder has been built and tested. The bases of the CARIBU EBIS electrical system are four voltage platforms on which both DC and pulsed high voltage outputs are controlled. The high voltage output pulses are created with either a combination of a function generator and a high voltage amplifier, or two high voltage DC power supplies and a high voltage solid state switch. Proper synchronization of the pulsed voltages, fundamental to optimizing the charge breeding performance, is achieved with triggering from a digital delay pulse generator. The control system is based on National Instruments realtime controllers and LabVIEW software implementing Functional Global Variables (FGV) to store and access instrument parameters. Fiber optic converters enable network communication and triggering across the platforms.

Proper motion survey for solar nearby stars

International Nuclear Information System (INIS)

Goldman, Bertrand

2001-01-01

For its microlensing observations EROS 2 built one of the largest CCD mosaic opera ting since 1996. This instrument allowed us to survey a large area of the sky, to look for faint, cool compact objects in the Solar neighborhood that may contribute to the Dark Matter revealed by flat rotation curves of spiral galaxies and the Milky Way. We imaged over 400 square degrees, at least three times over four years, with a single, stable instrument. The aim of this work is the reduction, the analysis and the detection of high proper motion objects that would look like those expected in a dark halo. We selected and analyzed thousands of images taken in two bands, visible and near-infrared, and obtained a catalogue of several thousand stars with proper motion typically higher than 80 milli-arc-seconds per year. None of these candidates displays the expected properties of the halo objects: very high proper motion and faintness. The second part of our work was to put constraints on the contributions of white dwarfs and brown dwarfs ta the halo. To do that, we simulated our data set and estimated our sensitivity to halo objects. We compared our results about moderately high proper motion stars with existing Galactic models, and confirmed the robustness of these models. We deduced a upper limit ta the contribution of M_v = 17.5 white dwarfs to the standard halo of 10% (at the 95% confidence level), or 5% of a 14 Gyr old halo, and to the contribution of brown dwarfs of 7% (95% C.L.). Finally, among our candidates, several interesting objects, that do not belong to the halo but are among the coolest and faintest known, have been discovered. Systematic search for faint, nearby objects thus lead us to study disk L dwarfs, as well as old white dwarfs of the disk. (author) [fr

Utilization of a Cloud-Based Diabetes Management Program for Insulin Initiation and Titration Enables Collaborative Decision Making Between Healthcare Providers and Patients.

Science.gov (United States)

Hsu, William C; Lau, Ka Hei Karen; Huang, Ruyi; Ghiloni, Suzanne; Le, Hung; Gilroy, Scott; Abrahamson, Martin; Moore, John

2016-02-01

Overseeing proper insulin initiation and titration remains a challenging task in diabetes care. Recent advances in mobile technology have enabled new models of collaborative care between patients and healthcare providers (HCPs). We hypothesized that the adoption of such technology could help individuals starting basal insulin achieve better glycemic control compared with standard clinical practice. This was a 12 ± 2-week randomized controlled study with 40 individuals with type 2 diabetes who were starting basal insulin due to poor glycemic control. The control group (n = 20) received standard face-to-face care and phone follow-up as needed in a tertiary center, whereas the intervention group (n = 20) received care through the cloud-based diabetes management program where regular communications about glycemic control and insulin doses were conducted via patient self-tracking tools, shared decision-making interfaces, secure text messages, and virtual visits (audio, video, and shared screen control) instead of office visits. By intention-to-treat analysis, the intervention group achieved a greater hemoglobin A1c decline compared with the control group (3.2 ± 1.5% vs. 2.0% ± 2.0%; P = 0.048). The Diabetes Treatment Satisfaction Questionnaire showed a significant improvement in the intervention group compared with the control group (an increase of 10.1 ± 11.7 vs. 2.1 ± 6.5 points; P = 0.01). HCPs spent less time with patients in the intervention group compared with those in the control group (65.9 min per subject vs. 81.6 min per subject). However, the intervention group required additional training time to use the mobile device. Mobile health technology could be an effective tool in sharing data, enhancing communication, and improving glycemic control while enabling collaborative decision making in diabetes care.

20 CFR 658.415 - Transferring complaints to proper JS office.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Transferring complaints to proper JS office... Agency Js Complaint System § 658.415 Transferring complaints to proper JS office. (a) Where a JS-related... local office serving the area in which the employer is located. Where a JS-related complaint deals with...

The proper name as starting point for basic reading skills

NARCIS (Netherlands)

Both-De Vries, Anna C.; Bus, Adriana G

Does alphabetic-phonetic writing start with the proper name and how does the name affect reading and writing skills? Sixty 4- to 5(1/2)-year-old children from middle SES families with Dutch as their first language wrote their proper name and named letters. For each child we created unique sets of

Computation of asteroid proper elements on the Grid

Directory of Open Access Journals (Sweden)

Novaković B.

2009-01-01

Full Text Available A procedure of gridification of the computation of asteroid proper orbital elements is described. The need to speed up the time consuming computations and make them more efficient is justified by the large increase of observational data expected from the next generation all sky surveys. We give the basic notion of proper elements and of the contemporary theories and methods used to compute them for different populations of objects. Proper elements for nearly 70,000 asteroids are derived since the beginning of use of the Grid infrastructure for the purpose. The average time for the catalogs update is significantly shortened with respect to the time needed with stand-alone workstations. We also present basics of the Grid computing, the concepts of Grid middleware and its Workload management system. The practical steps we undertook to efficiently gridify our application are described in full detail. We present the results of a comprehensive testing of the performance of different Grid sites, and offer some practical conclusions based on the benchmark results and on our experience. Finally, we propose some possibilities for the future work.

Computation of Asteroid Proper Elements on the Grid

Directory of Open Access Journals (Sweden)

Novaković, B.

2009-12-01

Full Text Available A procedure of gridification of the computation of asteroid proper orbital elements is described. The need to speed up the time consuming computations and make them more efficient is justified by the large increase of observational data expected from the next generation all sky surveys. We give the basic notion of proper elements and of the contemporary theories and methods used to compute them for different populations of objects. Proper elements for nearly 70,000 asteroids are derived since the beginning of use of the Grid infrastructure for the purpose. The average time for the catalogs update is significantly shortened with respect to the time needed with stand-alone workstations. We also present basics of the Grid computing, the concepts of Grid middleware and its Workload management system. The practical steps we undertook to efficiently gridify our application are described in full detail. We present the results of a comprehensive testing of the performance of different Grid sites, and offer some practical conclusions based on the benchmark results and on our experience. Finally, we propose some possibilities for the future work.

Secular Extragalactic Parallax and Geometric Distances with Gaia Proper Motions

Science.gov (United States)

Paine, Jennie; Darling, Jeremiah K.

2018-06-01

The motion of the Solar System with respect to the cosmic microwave background (CMB) rest frame creates a well measured dipole in the CMB, which corresponds to a linear solar velocity of about 78 AU/yr. This motion causes relatively nearby extragalactic objects to appear to move compared to more distant objects, an effect that can be measured in the proper motions of nearby galaxies. An object at 1 Mpc and perpendicular to the CMB apex will exhibit a secular parallax, observed as a proper motion, of 78 µas/yr. The relatively large peculiar motions of galaxies make the detection of secular parallax challenging for individual objects. Instead, a statistical parallax measurement can be made for a sample of objects with proper motions, where the global parallax signal is modeled as an E-mode dipole that diminishes linearly with distance. We present preliminary results of applying this model to a sample of nearby galaxies with Gaia proper motions to detect the statistical secular parallax signal. The statistical measurement can be used to calibrate the canonical cosmological “distance ladder.”

A perisynaptic ménage à trois between Dlg, DLin-7, and Metro controls proper organization of Drosophila synaptic junctions.

Science.gov (United States)

Bachmann, André; Kobler, Oliver; Kittel, Robert J; Wichmann, Carolin; Sierralta, Jimena; Sigrist, Stephan J; Gundelfinger, Eckart D; Knust, Elisabeth; Thomas, Ulrich

2010-04-28

Structural plasticity of synaptic junctions is a prerequisite to achieve and modulate connectivity within nervous systems, e.g., during learning and memory formation. It demands adequate backup systems that allow remodeling while retaining sufficient stability to prevent unwanted synaptic disintegration. The strength of submembranous scaffold complexes, which are fundamental to the architecture of synaptic junctions, likely constitutes a crucial determinant of synaptic stability. Postsynaptic density protein-95 (PSD-95)/ Discs-large (Dlg)-like membrane-associated guanylate kinases (DLG-MAGUKs) are principal scaffold proteins at both vertebrate and invertebrate synapses. At Drosophila larval glutamatergic neuromuscular junctions (NMJs) DlgA and DlgS97 exert pleiotropic functions, probably reflecting a few known and a number of yet-unknown binding partners. In this study we have identified Metro, a novel p55/MPP-like Drosophila MAGUK as a major binding partner of perisynaptic DlgS97 at larval NMJs. Based on homotypic LIN-2,-7 (L27) domain interactions, Metro stabilizes junctional DlgS97 in a complex with the highly conserved adaptor protein DLin-7. In a remarkably interdependent manner, Metro and DLin-7 act downstream of DlgS97 to control NMJ expansion and proper establishment of synaptic boutons. Using quantitative 3D-imaging we further demonstrate that the complex controls the size of postsynaptic glutamate receptor fields. Our findings accentuate the importance of perisynaptic scaffold complexes for synaptic stabilization and organization.

Boltzmann babies in the proper time measure

Energy Technology Data Exchange (ETDEWEB)

Bousso, Raphael; Bousso, Raphael; Freivogel, Ben; Yang, I-Sheng

2007-12-20

After commenting briefly on the role of the typicality assumption in science, we advocate a phenomenological approach to the cosmological measure problem. Like any other theory, a measure should be simple, general, well defined, and consistent with observation. This allows us to proceed by elimination. As an example, we consider the proper time cutoff on a geodesic congruence. It predicts that typical observers are quantum fluctuations in the early universe, or Boltzmann babies. We sharpen this well-known youngness problem by taking into account the expansion and open spatial geometry of pocket universes. Moreover, we relate the youngness problem directly to the probability distribution for observables, such as the temperature of the cosmic background radiation. We consider a number of modifications of the proper time measure, but find none that would make it compatible with observation.

Computing more proper covariances of energy dependent nuclear data

International Nuclear Information System (INIS)

Vanhanen, R.

2016-01-01

Highlights: • We present conditions for covariances of energy dependent nuclear data to be proper. • We provide methods to detect non-positive and inconsistent covariances in ENDF-6 format. • We propose methods to find nearby more proper covariances. • The methods can be used as a part of a quality assurance program. - Abstract: We present conditions for covariances of energy dependent nuclear data to be proper in the sense that the covariances are positive, i.e., its eigenvalues are non-negative, and consistent with respect to the sum rules of nuclear data. For the ENDF-6 format covariances we present methods to detect non-positive and inconsistent covariances. These methods would be useful as a part of a quality assurance program. We also propose methods that can be used to find nearby more proper energy dependent covariances. These methods can be used to remove unphysical components, while preserving most of the physical components. We consider several different senses in which the nearness can be measured. These methods could be useful if a re-evaluation of improper covariances is not feasible. Two practical examples are processed and analyzed. These demonstrate some of the properties of the methods. We also demonstrate that the ENDF-6 format covariances of linearly dependent nuclear data should usually be encoded with the derivation rules.

The Requirement of Being a "Fit and Proper" Person for the Legal ...

African Journals Online (AJOL)

An important requirement for admission as an attorney or advocate is to be a "fit and proper" person. Lawyers are also struck from the respective rolls of advocates or attorneys if they cease to be "fit and proper". This requirement of being a "fit and proper" person is not defined or described in legislation. It is left to the ...

The Essentials of Proper Wine Service.

Science.gov (United States)

Manago, Gary H.

This instructional unit was designed to assist the food services instructor and/or the restaurant manager in training students and/or staff in the proper procedure for serving wines to guests. The lesson plans included in this unit focus on: (1) the different types of wine glasses and their uses; (2) the parts of a wine glass; (3) the proper…

Stochastic control and real options valuation of thermal storage-enabled demand response from flexible district energy systems

OpenAIRE

Kitapbayev, Yerkin; Moriarty, John; Mancarella, Pierluigi

2014-01-01

In district energy systems powered by Combined Heat and Power (CHP) plants, thermal storage can significantly increase CHP flexibility to respond to real time market signals and therefore improve the business case of such demand response schemes in a Smart Grid environment. However, main challenges remain as to what is the optimal way to control inter-temporal storage operation in the presence of uncertain market prices, and then how to value the investment into storage as flexibility enabler...

Proper knowledge about the growing fat; Himan ni kansuru tadashii chishiki

Energy Technology Data Exchange (ETDEWEB)

Sakamot, Yoichi

1999-07-01

Body fat is substituted for the energy adopted redundantly in the inside of the body, and the deep diabetes which relates to the increase in the fat person and this, high blood pressure, high fat blood diseases, ventilation and so-called life habit sicknesses such as an arteriosclerosis disease have been increasing. It thinks with growing fat when it wants it understood why it grows fat as to something as to that fearfulness about growing fat properly. The health making based on the individual and the weight control can't be missed to get the rich old age, which it lives through the middle age. (NEDO)

Proper generalized decompositions an introduction to computer implementation with Matlab

CERN Document Server

Cueto, Elías; Alfaro, Icíar

2016-01-01

This book is intended to help researchers overcome the entrance barrier to Proper Generalized Decomposition (PGD), by providing a valuable tool to begin the programming task. Detailed Matlab Codes are included for every chapter in the book, in which the theory previously described is translated into practice. Examples include parametric problems, non-linear model order reduction and real-time simulation, among others. Proper Generalized Decomposition (PGD) is a method for numerical simulation in many fields of applied science and engineering. As a generalization of Proper Orthogonal Decomposition or Principal Component Analysis to an arbitrary number of dimensions, PGD is able to provide the analyst with very accurate solutions for problems defined in high dimensional spaces, parametric problems and even real-time simulation. .

The ENABLER---based on proven NERVA technology

International Nuclear Information System (INIS)

Livingston, J.M.; Pierce, B.L.

1991-01-01

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial Mass In Low Earth Orbit (IMLEO) and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tomorrow's space propulsion needs

The ENABLER - Based on proven NERVA technology

International Nuclear Information System (INIS)

Livingston, J.M.; Pierce, B.L.

1991-01-01

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs

The ENABLER - Based on proven NERVA technology

Science.gov (United States)

Livingston, Julie M.; Pierce, Bill L.

The ENABLER reactor for use in a nuclear thermal propulsion engine uses the technology developed in the NERVA/Rover program, updated to incorporate advances in the technology. Using composite fuel, higher power densities per fuel element, improved radiation resistant control components and the advancements in use of carbon-carbon materials; the ENABLER can provide a specific impulse of 925 seconds, an engine thrust to weight (excluding reactor shield) approaching five, an improved initial mass in low Earth orbit and a consequent reduction in launch costs and logistics problems. This paper describes the 75,000 lbs thrust ENABLER design which is a low cost, low risk approach to meeting tommorrow's space propulsion needs.

Enabling MPEG-2 video playback in embedded systems through improved data cache efficiency

Science.gov (United States)

Soderquist, Peter; Leeser, Miriam E.

1999-01-01

Digital video decoding, enabled by the MPEG-2 Video standard, is an important future application for embedded systems, particularly PDAs and other information appliances. Many such system require portability and wireless communication capabilities, and thus face severe limitations in size and power consumption. This places a premium on integration and efficiency, and favors software solutions for video functionality over specialized hardware. The processors in most embedded system currently lack the computational power needed to perform video decoding, but a related and equally important problem is the required data bandwidth, and the need to cost-effectively insure adequate data supply. MPEG data sets are very large, and generate significant amounts of excess memory traffic for standard data caches, up to 100 times the amount required for decoding. Meanwhile, cost and power limitations restrict cache sizes in embedded systems. Some systems, including many media processors, eliminate caches in favor of memories under direct, painstaking software control in the manner of digital signal processors. Yet MPEG data has locality which caches can exploit if properly optimized, providing fast, flexible, and automatic data supply. We propose a set of enhancements which target the specific needs of the heterogeneous types within the MPEG decoder working set. These optimizations significantly improve the efficiency of small caches, reducing cache-memory traffic by almost 70 percent, and can make an enhanced 4 KB cache perform better than a standard 1 MB cache. This performance improvement can enable high-resolution, full frame rate video playback in cheaper, smaller system than woudl otherwise be possible.

D2D-Enabled Small Cell Network Control Scheme Based on the Dynamic Stackelberg Game

Directory of Open Access Journals (Sweden)

Sungwook Kim

2017-01-01

Full Text Available For current and future cellular networks, small cell structure with licensed and unlicensed bandwidth, caching content provisioning, and device-to-device (D2D communications is seen as a necessary architecture. Recently, a series of control methods have been developed to address a myriad of challenges in next-generation small cell networks. In this study, we focus on the design of novel D2D-enabled small cell network control scheme by allowing caching and unlicensed D2D communications. Motivated by game theory and learning algorithm, the proposed scheme adaptively selects caching contents and splits the available bandwidth for licensed and unlicensed communications. Under dynamically changing network environments, we capture the dynamics of the network system and design a new dynamic Stackelberg game model. Based on a hierarchical and feedback based control manner, small base stations and users can be leaders or followers dynamically while improving 5G network performance. Simulations and performance analysis verify the efficiency of the proposed scheme, showing that our approach can outperform existing schemes by about 5%~15% in terms of bandwidth utilization, cache hit ratio, and system throughput.

Improving overlay control through proper use of multilevel query APC

Science.gov (United States)

Conway, Timothy H.; Carlson, Alan; Crow, David A.

2003-06-01

Many state-of-the-art fabs are operating with increasingly diversified product mixes. For example, at Cypress Semiconductor, it is not unusual to be concurrently running multiple technologies and many devices within each technology. This diverse product mix significantly increases the difficulty of manually controlling overlay process corrections. As a result, automated run-to-run feedforward-feedback control has become a necessary and vital component of manufacturing. However, traditional run-to-run controllers rely on highly correlated historical events to forecast process corrections. For example, the historical process events typically are constrained to match the current event for exposure tool, device, process level and reticle ID. This narrowly defined process stream can result in insufficient data when applied to lowvolume or new-release devices. The run-to-run controller implemented at Cypress utilizes a multi-level query (Level-N) correlation algorithm, where each subsequent level widens the search criteria for available historical data. The paper discusses how best to widen the search criteria and how to determine and apply a known bias to account for tool-to-tool and device-to-device differences. Specific applications include offloading lots from one tool to another when the first tool is down for preventive maintenance, utilizing related devices to determine a default feedback vector for new-release devices, and applying bias values to account for known reticle-to-reticle differences. In this study, we will show how historical data can be leveraged from related devices or tools to overcome the limitations of narrow process streams. In particular, this paper discusses how effectively handling narrow process streams allows Cypress to offload lots from a baseline tool to an alternate tool.

GMPLS control plane extensions in support of flex-grid enabled elastic optical networks

DEFF Research Database (Denmark)

Turus, Ioan; Fagertun, Anna Manolova; Dittmann, Lars

2013-01-01

of generalized labels format and enable enhancements for the wavelength selection procedures. OSPF-TE enables the creation of spectrum databases based on novel LSA sub-TLV attributes capable of advertising spectrum status. Based on the implemented extensions, we propose and evaluate advanced distributed spectrum...... allocation schemes and strategies for dynamic routing algorithms in support of flex-grid optical networks....

Broad-scale recombination patterns underlying proper disjunction in humans.

Directory of Open Access Journals (Sweden)

Adi Fledel-Alon

2009-09-01

Full Text Available Although recombination is essential to the successful completion of human meiosis, it remains unclear how tightly the process is regulated and over what scale. To assess the nature and stringency of constraints on human recombination, we examined crossover patterns in transmissions to viable, non-trisomic offspring, using dense genotyping data collected in a large set of pedigrees. Our analysis supports a requirement for one chiasma per chromosome rather than per arm to ensure proper disjunction, with additional chiasmata occurring in proportion to physical length. The requirement is not absolute, however, as chromosome 21 seems to be frequently transmitted properly in the absence of a chiasma in females, a finding that raises the possibility of a back-up mechanism aiding in its correct segregation. We also found a set of double crossovers in surprisingly close proximity, as expected from a second pathway that is not subject to crossover interference. These findings point to multiple mechanisms that shape the distribution of crossovers, influencing proper disjunction in humans.

Improved Industrial Development In Nigeria Through Proper ...

African Journals Online (AJOL)

The paper noted that most industrial development strategies in Nigeria did not give attention to technology education. And that technology education as recognized by few of the strategies were not only properly articulated for the tertiary institutions, but also poorly implemented. Therefore, to put technology and thus ...

Computing Proper Equilibria of Zero-Sum Games

DEFF Research Database (Denmark)

Miltersen, Peter Bro; Sørensen, Troels Bjerre

2007-01-01

We show that a proper equilibrium of a matrix game can be found in polynomial time by solving a linear (in the number of pure strategies of the two players) number of linear programs of roughly the same dimensions as the standard linear programs describing the Nash equilibria of the game....

45 CFR 170.423 - Principles of proper conduct for ONC-ATCBs.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Principles of proper conduct for ONC-ATCBs. 170... § 170.423 Principles of proper conduct for ONC-ATCBs. An ONC-ATCB shall: (a) Operate its certification... EHR Module developer conspicuously include the following text on its Web site and in all marketing...

25 CFR 87.12 - Insuring the proper performance of approved plans.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Insuring the proper performance of approved plans. 87.12... DISTRIBUTION OF INDIAN JUDGMENT FUNDS § 87.12 Insuring the proper performance of approved plans. A timetable... regarding the maintenance of the timetable, a full accounting of any per capita distribution, and the...

32 CFR 725.7 - Contents of a proper request or demand.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false Contents of a proper request or demand. 725.7 Section 725.7 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL RELEASE... § 725.7 Contents of a proper request or demand. (a) Routine requests. If official information is sought...

Dimension invariants for groups admitting a cocompact model for proper actions

DEFF Research Database (Denmark)

Degrijse, Dieter Dries; Martínez-Pérez, Conchita

2016-01-01

Let G be a group that admits a cocompact classifying space for proper actions X. We derive a formula for the Bredon cohomological dimension for proper actions of G in terms of the relative cohomology with compact support of certain pairs of subcomplexes of X. We use this formula to compute the Br...

Enabling Controlling Complex Networks with Local Topological Information.

Science.gov (United States)

Li, Guoqi; Deng, Lei; Xiao, Gaoxi; Tang, Pei; Wen, Changyun; Hu, Wuhua; Pei, Jing; Shi, Luping; Stanley, H Eugene

2018-03-15

Complex networks characterize the nature of internal/external interactions in real-world systems including social, economic, biological, ecological, and technological networks. Two issues keep as obstacles to fulfilling control of large-scale networks: structural controllability which describes the ability to guide a dynamical system from any initial state to any desired final state in finite time, with a suitable choice of inputs; and optimal control, which is a typical control approach to minimize the cost for driving the network to a predefined state with a given number of control inputs. For large complex networks without global information of network topology, both problems remain essentially open. Here we combine graph theory and control theory for tackling the two problems in one go, using only local network topology information. For the structural controllability problem, a distributed local-game matching method is proposed, where every node plays a simple Bayesian game with local information and local interactions with adjacent nodes, ensuring a suboptimal solution at a linear complexity. Starring from any structural controllability solution, a minimizing longest control path method can efficiently reach a good solution for the optimal control in large networks. Our results provide solutions for distributed complex network control and demonstrate a way to link the structural controllability and optimal control together.

PropeR: a multi disciplinary EPR system

NARCIS (Netherlands)

van der Linden, Helma; Boers, Gerrit; Tange, Huibert; Talmon, Jan; Hasman, Arie

2003-01-01

This article describes the architecture of an EPR system developed for the PropeR project. This EPR system not only aims at supporting home care of stroke patients, but is also designed in such a way that it can be ported to other medical services without much effort. We will briefly describe the

Structural Control of InP/ZnS Core/Shell Quantum Dots Enables High-quality White LEDs.

Science.gov (United States)

Ganesh Kumar, Baskaran; Sadeghi, Sadra; Melikov, Rustamzhon; Mohammadi Aria, Mohammed; Bahmani Jalali, Houman; Ow-Yang, Cleva; Nizamoglu, Sedat

2018-05-30

Herein, we demonstrate that the structural and optical control of InP-based quantum dots can lead to high-performance LEDs. Zinc sulphide (ZnS) shells passivate the InP quantum dot core and increase the quantum yield in green-emitting quantum dots by 13-fold and red-emitting quantum dots by 8-fold. The optimised quantum dots are integrated in the liquid-state to eliminate aggregation induced emission quenching and we fabricated white LEDs with warm, neutral, and cool white appearance by the down-conversion mechanism. The quantum dot-functionalized white LEDs achieve luminous efficiency up to 14.7 lm/W and colour-rendering index up to 80. The structural and optical control of InP/ZnS core/shell quantum dots enable 23-fold enhancement in luminous efficiency of white LEDs compared to ones containing only QDs of InP core. © 2018 IOP Publishing Ltd.

Inspection control and the environmental protection

Directory of Open Access Journals (Sweden)

Milkov Dragan L.

2015-01-01

Full Text Available Environmental protection is the task of many administrative bodies, but the activity of the environmental inspection is of special importance. According to the Law on Environmental Protection, inspection's tasks in this area belong to the competence of republican bodies, ie. Ministry of Agriculture and Environmental Protection. Autonomous province and local self-government have only delegated competence in this field, under condition that this is explicitly regulated in special laws. Environmental inspection's activity consists in preventive actions, certain prior - preparatory activities and the audit itself. In addition, following the intervention of the Inspector issue of the control may be corrective or repressive. According to the Law on Inspection Control and the Law on Environmental Protection, the inspectors have a number of powers and responsibilities, which enable them to ensure the lawful and proper conduct of individuals and legal entities.

Impact of Training on Improving Proper Handwashing Practices among Elementary School Students

Directory of Open Access Journals (Sweden)

Theruna Huthamaputiran

2017-06-01

Full Text Available Background: Hand washing is among the most effective ways to prevent diseases. In Indonesia, only a quarter of the entire population practice proper handwashing techniques. Of these, children are the most vulnerable group for contracting diseases. Nevertheless, they also are crucial agent for behavior transformation as they are keen and open to new ideas. Therefore, this study was conducted to determine if training would have an improvement on a proper hand washing practices among elementary school students. Methods:An observational descriptive study design using random sampling was conducted from September to November 2013 in Jatinangor Subdistrict, West Java, Indonesia using primary data of one hundred elementary school students from four elementary schools. Questionnaires were given after informed consent. A demonstration on hand washing techniques and education on proper hand washing practices was then given. Two weeks later, the same questionnaire was given to measure the influence of the training. The collected data were presented using frequency tabulation. Results: Before the training on proper hand washing practices was conducted, only 86.9% students were practicing it properly. After the training was given, 90.7% of the students were doing it properly. For the hand washing technique, only 66.8% of students knew the correct steps before the intervention was given and 78.7% students did them correctly after the intervention. Conclusions:The training shows an overall improvement on the students’ hand washing practices.   DOI: 10.15850/amj.v4n2.1073

Morphometric characteristics of the neurons of the human subiculum proper

Directory of Open Access Journals (Sweden)

Živanović-Mačužić Ivana

2012-01-01

Full Text Available The human subiculum is a significant part of the hippocampal formation positioned between the hippocampus proper and the entorhinal and other cortices. It plays an important role in spatial navigation, memory processing and control of the response to stress. The aim of our study was identification of the morphometric characteristics of the neurons of the human subiculum proper: the maximum length and width of cell body and total dendritic length and volume of cell body. Comparing the measured parameters of different types of subicular neurons (bipolar, multipolar, pyramidal neurons with triangular-shaped soma and neurons with oval-shaped soma, we can conclude that bipolar neurons have the lowest values of the measured parameters: the maximum length of their cell body is 14.1 ± 0.2 µm, the maximum width is 13.9 ± 0.5 µm, and total dendritic length is 14597 ± 3.1 µm. The lowest volume value was observed in bipolar neurons; the polymorphic layer is 1152.99 ± 662.69 µm3. The pyramidal neurons of the pyramidal layer have the highest value for the maximal length of the cell body (44.43 ± 7.94 µm, maximum width (23.64 ± 1.89 µm, total dendritic length (1830 ± 466.3 µm and volume (11768.65±4004.9 µm3 These characteristics of the pyramidal neurons indicate their importance, because the axons of these neurons make up the greatest part of the fornix, along with the axons of neurons of the CA1 hippocampal field.

Environment-Friendly Control of Pear Scab and Rust Using Lime Sulfur

Directory of Open Access Journals (Sweden)

Ju Hoon Cha

2018-03-01

Full Text Available Pear scab and rust are the major diseases causing severe epidemics in organic cultivation of pear trees. Incidences of pear scab and rust were compared in organically managed plots and conventionally managed plots to obtain optimum application schedule of environment-friendly control agents in organically managed plots. Organically cultural practice with 10 time-applications of lime sulfur and Bordeaux mixture showed higher than 40% of control efficacies of pear scab and rust compared to conventionally cultural practice. Organically cultural practice with 8 time-applications of lime sulfur considering weather condition showed higher than 30% of control efficacies of pear scab compared to conventionally cultural practice. The results suggest that proper application of environment-friendly control agents such as lime sulfur considering weather condition will enable effective control of the major diseases for organic cultivation of pear.

Control and operation cost optimization of the HISS cryogenic system

International Nuclear Information System (INIS)

Porter, J.; Anderson, D.; Bieser, F.

1984-01-01

This chapter describes a control strategy for the Heavy Ion Spectrometer System (HISS), which relies upon superconducting coils of cryostable design to provide a particle bending field of 3 tesla. The control strategy has allowed full time unattended operation and significant operating cost reductions. Microprocessor control of flash boiling style LIN circuits has been successful. It is determined that the overall operating cost of most cryogenic systems using closed loop helium systems can be minimized by properly balancing the total heat load between the helium and nitrogen circuits to take advantage of the non-linearity which exists in the power input to 4K refrigeration characteristic. Variable throughput compressors have the advantage of turndown capability at steady state. It is concluded that a hybrid system using digital and analog input for control, data display and alarms enables full time unattended operation

Synchronization of RF fields of Indus 2 RF cavities for proper injection and acceleration of beam

International Nuclear Information System (INIS)

Tiwari, Nitesh; Bagduwal, Pritam S.; Lad, M.; Hannurkar, P.R.

2009-01-01

Indus-2 is a synchrotron light source with designed parameters of 2.5 GeV, 300 mA beam current. Four RF cavities fed from four RF power stations have been used for beam acceleration from 550 MeV to 2.5 GeV and synchrotron loss compensation. Particle should reach the RF cavity at the proper phase for proper acceptance of the beam in ring. At injection if the phase is not proper the acceptance efficiency reduces and the maximum stored current in the ring also gets limited. Equal contribution from four cavities at every value of current and energy level is very important. Improper phase will cause the imbalance of the power among different station hence will limit maximum stored current and reduce life time of the stored beam. Phase optimization was done in two-step, first at injection to have better injection rate and the stations were operated at the sufficient power for control loops to operate. Then at 2 GeV and 2.5 GeV energy so that beam extracts equal power from all four RF stations. Phase synchronization of all four cavities from injection to 2.5 GeV has already been done at 50 mA stored beam current. If phases of RF fields inside four RF cavities is not proper then beam will not see the total RF voltage as summation of all four cavity gap voltages, hence it is a very important parameter to be optimized and maintained during operation. (author)

Assigned value improves memory of proper names.

Science.gov (United States)

Festini, Sara B; Hartley, Alan A; Tauber, Sarah K; Rhodes, Matthew G

2013-01-01

Names are more difficult to remember than other personal information such as occupations. The current research examined the influence of assigned point value on memory and metamemory judgements for names and occupations to determine whether incentive can improve recall of proper names. In Experiment 1 participants studied face-name and face-occupation pairs assigned 1 or 10 points, made judgements of learning, and were given a cued recall test. High-value names were recalled more often than low-value names. However, recall of occupations was not influenced by value. In Experiment 2 meaningless nonwords were used for both names and occupations. The name difficulty disappeared, and value influenced recall of both names and occupations. Thus value similarly influenced names and occupations when meaningfulness was held constant. In Experiment 3 participants were required to use overt rote rehearsal for all items. Value did not boost recall of high-value names, suggesting that differential processing could not be implemented to improve memory. Thus incentives may improve memory for proper names by motivating people to engage in selective rehearsal and effortful elaborative processing.

Control-oriented modeling and adaptive backstepping control for a nonminimum phase hypersonic vehicle.

Science.gov (United States)

Ye, Linqi; Zong, Qun; Tian, Bailing; Zhang, Xiuyun; Wang, Fang

2017-09-01

In this paper, the nonminimum phase problem of a flexible hypersonic vehicle is investigated. The main challenge of nonminimum phase is the prevention of dynamic inversion methods to nonlinear control design. To solve this problem, we make research on the relationship between nonminimum phase and backstepping control, finding that a stable nonlinear controller can be obtained by changing the control loop on the basis of backstepping control. By extending the control loop to cover the internal dynamics in it, the internal states are directly controlled by the inputs and simultaneously serve as virtual control for the external states, making it possible to guarantee output tracking as well as internal stability. Then, based on the extended control loop, a simplified control-oriented model is developed to enable the applicability of adaptive backstepping method. It simplifies the design process and releases some limitations caused by direct use of the no simplified control-oriented model. Next, under proper assumptions, asymptotic stability is proved for constant commands, while bounded stability is proved for varying commands. The proposed method is compared with approximate backstepping control and dynamic surface control and is shown to have superior tracking accuracy as well as robustness from the simulation results. This paper may also provide a beneficial guidance for control design of other complex systems. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Preserving Smart Objects Privacy through Anonymous and Accountable Access Control for a M2M-Enabled Internet of Things

Science.gov (United States)

Hernández-Ramos, José L.; Bernabe, Jorge Bernal; Moreno, M. Victoria; Skarmeta, Antonio F.

2015-01-01

As we get into the Internet of Things era, security and privacy concerns remain as the main obstacles in the development of innovative and valuable services to be exploited by society. Given the Machine-to-Machine (M2M) nature of these emerging scenarios, the application of current privacy-friendly technologies needs to be reconsidered and adapted to be deployed in such global ecosystem. This work proposes different privacy-preserving mechanisms through the application of anonymous credential systems and certificateless public key cryptography. The resulting alternatives are intended to enable an anonymous and accountable access control approach to be deployed on large-scale scenarios, such as Smart Cities. Furthermore, the proposed mechanisms have been deployed on constrained devices, in order to assess their suitability for a secure and privacy-preserving M2M-enabled Internet of Things. PMID:26140349

Preserving Smart Objects Privacy through Anonymous and Accountable Access Control for a M2M-Enabled Internet of Things

Directory of Open Access Journals (Sweden)

José L. Hernández-Ramos

2015-07-01

Full Text Available As we get into the Internet of Things era, security and privacy concerns remain as the main obstacles in the development of innovative and valuable services to be exploited by society. Given the Machine-to-Machine (M2M nature of these emerging scenarios, the application of current privacy-friendly technologies needs to be reconsidered and adapted to be deployed in such global ecosystem. This work proposes different privacy-preserving mechanisms through the application of anonymous credential systems and certificateless public key cryptography. The resulting alternatives are intended to enable an anonymous and accountable access control approach to be deployed on large-scale scenarios, such as Smart Cities. Furthermore, the proposed mechanisms have been deployed on constrained devices, in order to assess their suitability for a secure and privacy-preserving M2M-enabled Internet of Things.

Preserving Smart Objects Privacy through Anonymous and Accountable Access Control for a M2M-Enabled Internet of Things.

Science.gov (United States)

Hernández-Ramos, José L; Bernabe, Jorge Bernal; Moreno, M Victoria; Skarmeta, Antonio F

2015-07-01

As we get into the Internet of Things era, security and privacy concerns remain as the main obstacles in the development of innovative and valuable services to be exploited by society. Given the Machine-to-Machine (M2M) nature of these emerging scenarios, the application of current privacy-friendly technologies needs to be reconsidered and adapted to be deployed in such global ecosystem. This work proposes different privacy-preserving mechanisms through the application of anonymous credential systems and certificateless public key cryptography. The resulting alternatives are intended to enable an anonymous and accountable access control approach to be deployed on large-scale scenarios, such as Smart Cities. Furthermore, the proposed mechanisms have been deployed on constrained devices, in order to assess their suitability for a secure and privacy-preserving M2M-enabled Internet of Things.

NASP - Enabling new space launch options

Science.gov (United States)

Froning, David; Gaubatz, William; Mathews, George

1990-10-01

Successful NASP developments in the United States are bringing about the possibility of effective, fully reusable vehicles for transport of people and cargo between earth and space. These developments include: extension of airbreathing propulsion to a much higher speed; densification of propellants for greater energy per unit volume of mass; structures with much greater strength-to-weight at high temperatures; computational advancements that enable more optimal design and integration of airframes, engines and controls; and advances in avionics, robotics, artificial intelligence and automation that enable accomplishment of earth-to-orbit (ETO) operations with much less manpower support and cost. This paper describes the relative magnitude of improvement that these developments may provide.

[Rapid Response obstetrics Team at Instituto Mexicano del Seguro Social,enabling factors].

Science.gov (United States)

Dávila-Torres, Javier; González-Izquierdo, José de Jesús; Ruíz-Rosas, Roberto Aguli; Cruz-Cruz, Polita Del Rocío; Hernández-Valencia, Marcelino

2015-01-01

There are barriers and enablers for the implementation of Rapid Response Teams in obstetric hospitals. The enabling factors were determined at Instituto Mexicano del Seguro Social (IMSS) MATERIAL AND METHODS: An observational, retrospective study was conducted by analysing the emergency obstetric reports sent by mobile technology and e-mail to the Medical Care Unit of the IMSS in 2013. Frequency and mean was obtained using the Excel 2010 program for descriptive statistics. A total of 164,250 emergency obstetric cases were reported, and there was a mean of 425 messages per day, of which 32.2% were true obstetric emergencies and required the Rapid Response team. By e-mail, there were 73,452 life threatening cases (a mean of 6 cases per day). A monthly simulation was performed in hospitals (480 in total). Enabling factors were messagés synchronisation among the participating personnel,the accurate record of the obstetrics, as well as the simulations performed by the operational staff. The most common emergency was pre-eclampsia-eclampsia with 3,351 reports, followed by obstetric haemorrhage with 2,982 cases. The enabling factors for the implementation of a rapid response team at IMSS were properly timed communication between the central delegation teams, as they allowed faster medical and administrative management and participation of hospital medical teams in the process. Mobile technology has increased the speed of medical and administrative management in emergency obstetric care. However, comparative studies are needed to determine the statistical significance. Published by Masson Doyma México S.A.

Implementation of a Quality Control using portal imaging dynamic MLC; Implementacion de un programa de control de calidad de MLC dinamico mediante imagen portal

Energy Technology Data Exchange (ETDEWEB)

Sanz Freire, C. J.; Vazquez Galinanes, A.; Collado Chamorro, P. M.; Diaz Pascual, V.; Gomez Amez, J.; Sanchez Martinez, S.; Ossola Lentati, G. A

2011-07-01

The precision in the correct beam irradiation in the treatment of highly modulated Intensity Modulated Radiation Therapy (IMRT) depends largely on the characteristics and behavior of the multi leaf collimator (MLC). Quality control (QC) of this element is essential to ensure proper delivery of the beams calculated. It is important to know the absolute position of each sheet, the motion characteristics of each behavior and stability. Among the numerous methods for carrying out the QC MLC, the use of portal imaging is a practical and high resolution. This paper describes the development of a quality control program based dynamic MLC portal image, self-developed software that enables analysis and the results of two years experience following the implementation of IMRT treatments at our center. (Author)

On proper Shapley values for monotone TU-games

NARCIS (Netherlands)

van den Brink, J.R.; Levinsky, R.; Zeleny, M.

2015-01-01

The Shapley value of a cooperative transferable utility game distributes the dividend of each coalition in the game equally among its members. Given exogenous weights for all players, the corresponding weighted Shapley value distributes the dividends proportionally to their weights. A proper Shapley

Predicted space motions for hypervelocity and runaway stars: proper motions and radial velocities for the Gaia Era

Energy Technology Data Exchange (ETDEWEB)

Kenyon, Scott J.; Brown, Warren R.; Geller, Margaret J. [Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138 (United States); Bromley, Benjamin C., E-mail: skenyon@cfa.harvard.edu, E-mail: wbrown@cfa.harvard.edu, E-mail: mgeller@cfa.harvard.edu, E-mail: bromley@physics.utah.edu [Department of Physics, University of Utah, 115 S 1400 E, Rm 201, Salt Lake City, UT 84112 (United States)

2014-10-01

We predict the distinctive three-dimensional space motions of hypervelocity stars (HVSs) and runaway stars moving in a realistic Galactic potential. For nearby stars with distances less than 10 kpc, unbound stars are rare; proper motions alone rarely isolate bound HVSs and runaways from indigenous halo stars. At large distances of 20-100 kpc, unbound HVSs are much more common than runaways; radial velocities easily distinguish both from indigenous halo stars. Comparisons of the predictions with existing observations are encouraging. Although the models fail to match observations of solar-type HVS candidates from SEGUE, they agree well with data for B-type HVS and runaways from other surveys. Complete samples of g ≲ 20 stars with Gaia should provide clear tests of formation models for HVSs and runaways and will enable accurate probes of the shape of the Galactic potential.

Analytical Model for LLC Resonant Converter With Variable Duty-Cycle Control

DEFF Research Database (Denmark)

Shen, Yanfeng; Wang, Huai; Blaabjerg, Frede

2016-01-01

are identified and discussed. The proposed model enables a better understanding of the operation characteristics and fast parameter design of the LLC converter, which otherwise cannot be achieved by the existing simulation based methods and numerical models. The results obtained from the proposed model......In LLC resonant converters, the variable duty-cycle control is usually combined with a variable frequency control to widen the gain range, improve the light-load efficiency, or suppress the inrush current during start-up. However, a proper analytical model for the variable duty-cycle controlled LLC...... converter is still not available due to the complexity of operation modes and the nonlinearity of steady-state equations. This paper makes the efforts to develop an analytical model for the LLC converter with variable duty-cycle control. All possible operation models and critical operation characteristics...

The Requirement of Being a "Fit and Proper" Person for the Legal Profession

Directory of Open Access Journals (Sweden)

M Slabbert

2011-07-01

Full Text Available An important requirement for admission as an attorney or advocate is to be a "fit and proper" person. Lawyers are also struck from the respective rolls of advocates or attorneys if they cease to be "fit and proper". This requirement of being a "fit and proper" person is not defined or described in legislation. It is left to the subjective interpretation of and application by seniors in the profession and ultimately the court. In the apartheid years this requirement was applied arbitrarily but today the question may be asked why some lawyers who have been found to be "fit and proper" do not act as such. The pre-admission character screening of lawyers seems not to be effective any more. Post- admission moral development is imperative.

Creating an Economically Enabling and Competitive Business ...

International Development Research Centre (IDRC) Digital Library (Canada)

Creating an Economically Enabling and Competitive Business Environment in the West Bank and Gaza Strip. The prospect of indefinite Israeli occupation of the Palestinian territories, and their extreme dependence on foreign assistance and Israeli-controlled customs revenues, had led to the conclusion that the Palestinian ...

Proper-time quantum-mechanics and the Klein paradox

International Nuclear Information System (INIS)

Thaller, B.

1981-01-01

Scattering at high potential-steps is treated in the framework of relativistic proper-time theory. No paradox arises in contrast to Dirac's wavemechanics (''Klein's paradox''); pair creation may happen with a certain probability and may be described as a scattering process with ordinary quantum-mechanical methods. (author)

Positions and proper motions of dwarf carbon stars

Science.gov (United States)

Deutsch, Eric W.

1994-01-01

Recent-epochs positions and proper motions of nine dwarf carbon star candidates are presented along with finding charts for each object. Measurements are obtained from digitized Palomar Observatory Sky Survey (POSS) and Quik V plate archives at the Space Telescope Science Institute, and from recent CCD images.

How to get properly rid of confidential data?

CERN Multimedia

Computer Security Team

2012-01-01

Have you ever bought a used laptop on ebay? Try it and you might not only get (hopefully) functional hardware, but also a bunch of personal files, intriguing photos, sensitive documents, etc. Not everybody worries enough to clean the local hard disks properly before selling their equipment or giving it away. So the next owner of the hard disk can comfortably crawl through the remaining data, and use it at his or her convenience...   In fact, properly cleaning a hard disk is difficult! Deleting local files or formatting the hard disk usually just purges the files from being listed in the folder, but the actual data remains intact on the hard disk. Freely available tools can easily reconstruct those files and, thus, expose it. It is better practice to get rid of your files by running tools like “shred” on the Linux platform (try “shred –fuvzn1 [FILENAME]” or check “man shred” for details), or “File Shredder&rdqu...

Proper Use of Audio-Visual Aids: Essential for Educators.

Science.gov (United States)

Dejardin, Conrad

1989-01-01

Criticizes educators as the worst users of audio-visual aids and among the worst public speakers. Offers guidelines for the proper use of an overhead projector and the development of transparencies. (DMM)

Metasurface-Enabled Remote Quantum Interference.

Science.gov (United States)

Jha, Pankaj K; Ni, Xingjie; Wu, Chihhui; Wang, Yuan; Zhang, Xiang

2015-07-10

An anisotropic quantum vacuum (AQV) opens novel pathways for controlling light-matter interaction in quantum optics, condensed matter physics, etc. Here, we theoretically demonstrate a strong AQV over macroscopic distances enabled by a judiciously designed array of subwavelength-scale nanoantennas-a metasurface. We harness the phase-control ability and the polarization-dependent response of the metasurface to achieve strong anisotropy in the decay rate of a quantum emitter located over distances of hundreds of wavelengths. Such an AQV induces quantum interference among radiative decay channels in an atom with orthogonal transitions. Quantum vacuum engineering with metasurfaces holds promise for exploring new paradigms of long-range light-matter interaction for atom optics, solid-state quantum optics, quantum information processing, etc.

Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

Directory of Open Access Journals (Sweden)

Anita Romsdal

2014-07-01

Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

Proper Elements and Secular Resonances for Irregular Satellites

Science.gov (United States)

Beaugé, C.; Nesvorný, D.

2007-06-01

We present results of an analytical study of proper elements and secular resonances for the irregular satellites of the outer planets. In the case of the Jovian system we identify three satellite families, two of them previously known (Carme and Ananke), plus a new agglomeration of four bodies that includes Pasiphae as its largest member. While the distribution of proper elements for Saturn's moons seems to be more random, a small cluster was found for the direct moons formed by Albiorix, Erriapo, and 2004 S1, slightly different from the so-called Gaulish cluster. No significant families are detected in the present study for the Uranian or Neptunian satellite systems. For each satellite system we determine the location of several secular resonances in the proper element space. Apart from the well-known resonance locks of Pasiphae, Sinope, and Siarnaq, a comparison between the resonance locations and proper elements shows that Saturn's satellite Narvi also exhibits temporary librations in the ϖ-ϖsolar resonance. However, unlike the resonant Jovian moons that are located in the same configuration, Narvi's critical argument librates alternately around values near 90° and 270°. Neither the Uranian nor Neptunian systems seem to have resonant moons. The resonant dynamics of the real satellites in the vicinity of ϖ˙-ϖ˙solar=0 is studied with a simple model for secular resonances based on the restricted three-body problem. Depending on the initial conditions, we show the existence of one or two modes of libration that can occur at different values of the critical angle, showing a good correspondence with the observed behavior of all the resonant moons. Finally, we discuss the global distribution of the real satellites with respect to the secular resonances, as compared with synthetic populations of bodies drawn solely from stability conditions. For Saturn, we find that the present satellite population appears compatible with simple random distributions. Although

Proper comparison among methods using a confusion matrix

CSIR Research Space (South Africa)

Salmon

2015-07-01

Full Text Available -1 IGARSS 2015, Milan, Italy, 26-31 July 2015 Proper comparison among methods using a confusion matrix 1,2 B.P. Salmon, 2,3 W. Kleynhans, 2,3 C.P. Schwegmann and 1J.C. Olivier 1School of Engineering and ICT, University of Tasmania, Australia 2...

Foot-controlled robotic-enabled endoscope holder for endoscopic sinus surgery: A cadaveric feasibility study.

Science.gov (United States)

Chan, Jason Y K; Leung, Iris; Navarro-Alarcon, David; Lin, Weiyang; Li, Peng; Lee, Dennis L Y; Liu, Yun-hui; Tong, Michael C F

2016-03-01

To evaluate the feasibility of a unique prototype foot-controlled robotic-enabled endoscope holder (FREE) in functional endoscopic sinus surgery. Cadaveric study. Using human cadavers, we investigated the feasibility, advantages, and disadvantages of the robotic endoscope holder in performing endoscopic sinus surgery with two hands in five cadaver heads, mimicking a single nostril three-handed technique. The FREE robot is relatively easy to use. Setup was quick, taking less than 3 minutes from docking the robot at the head of the bed to visualizing the middle meatus. The unit is also relatively small, takes up little space, and currently has four degrees of freedom. The learning curve for using the foot control was short. The use of both hands was not hindered by the presence of the endoscope in the nasal cavity. The tremor filtration also aided in the smooth movement of the endoscope, with minimal collisions. The FREE endoscope holder in an ex-vivo cadaver test corroborated the feasibility of the robotic prototype, which allows for a two-handed approach to surgery equal to a single nostril three-handed technique without the holder that may reduce operating time. Further studies will be needed to evaluate its safety profile and use in other areas of endoscopic surgery. NA. Laryngoscope, 126:566-569, 2016. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

Management Control in Enterprise System Enabled Organizations

DEFF Research Database (Denmark)

Rikhardsson, Pall; Rohde, Carsten; Rom, Anders

2007-01-01

The objective of this paper is to add to the limited body of knowledge on the relationship between enterprise systems (ES) and management control. Based on a literature review, we describe and classify studies that empirically address this relationship. Apart from not being extensive, the research...... done so far primarily addresses the relationship between management control and ES based on a limited number of methodologies and approaches. We argue that there seems to be a need for more research done from functionalistic and critical perspectives, as well which employs a greater variety...

Survey of Enabling Technologies for CAPS

Science.gov (United States)

Antol, Jeffrey; Mazanek, Daniel D.; Koons, Robert H.

2005-01-01

The enabling technologies required for the development of a viable Comet/Asteroid Protection System (CAPS) can be divided into two principal areas: detection and deflection/orbit modification. With the proper funding levels, many of the technologies needed to support a CAPS architecture could be achievable within the next 15 to 20 years. In fact, many advanced detection technologies are currently in development for future in-space telescope systems such as the James Webb Space Telescope (JWST), formerly known as the Next Generation Space Telescope. It is anticipated that many of the JWST technologies would be available for application for CAPS detection concepts. Deflection/orbit modification technologies are also currently being studied as part of advanced power and propulsion research. However, many of these technologies, such as extremely high-output power systems, advanced propulsion, heat rejection, and directed energy systems, would likely be farther term in availability than many of the detection technologies. Discussed subsequently is a preliminary examination of the main technologies that have been identified as being essential to providing the element functionality defined during the CAPS conceptual study. The detailed requirements for many of the technology areas are still unknown, and many additional technologies will be identified as future in-depth studies are conducted in this area.

Increasing patient knowledge on the proper usage of a PCA machine with the use of a post-operative instructional card.

Science.gov (United States)

Shovel, Louisa; Max, Bryan; Correll, Darin J

2016-01-01

The purpose of this study was to see if an instructional card, attached to the PCA machine following total hip arthroplasty describing proper use of the device, would positively affect subjects' understanding of device usage, pain scores, pain medication consumption and satisfaction. Eighty adults undergoing total hip replacements who had been prescribed PCA were randomized into two study groups. Forty participants received the standard post-operative instruction on PCA device usage at our institution. The other 40 participants received the standard of care in addition to being given a typed instructional card immediately post-operatively, describing proper PCA device use. This card was attached to the PCA device during their recovery period. On post-operative day one, each patient completed a questionnaire on PCA usage, pain scores and satisfaction scores. The pain scores in the Instructional Card group were significantly lower than the Control group (p = 0.024). Subjects' understanding of PCA usage was also improved in the Instructional Card group for six of the seven questions asked. The findings from this study strongly support that postoperative patient information on proper PCA use by means of an instructional card improves pain control and hence the overall recovery for patients undergoing surgery. In addition, through improved understanding it adds an important safety feature in that patients and potentially their family members and/or friends may refrain from PCA-by-proxy. This article demonstrates that the simple intervention of adding an instructional card to a PCA machine is an effective method to improve patients' knowledge as well as pain control and potentially increase the safety of the device use.

Statistical HR diagrams for one hundred and fifteen thousand proper-motion stars

International Nuclear Information System (INIS)

Luyten, W.J.

1978-01-01

Since regular HR diagrams require apparent magnitudes, colors or spectra, and parallaxes, and such complete data are available for relatively few stars, there may be some advantage in making up diagrams which utilize proper motions instead of parallaxes, and are thus statistically similar to an HR diagram. The reduced proper motion, first used by Hertzsprung, is defined as H=m+5+5log μ, but may also be written as H=M+5log T, where T is the tangential velocity, and is expressed in astronomical units per year. A diagram plotting H against color will thus contain the considerable dispersion in tangential velocity which is a serious disadvantage. However, this is outweighed by two practical advantages. First, the one and the same person who does the proper motion survey can, and does also determine the other two quantities needed. Second, when using data obtained from such a proper motion survey one deals, statistically, with all the stars within a given distance and the results, therefore, are much more representative of the real situation in space than many HR diagrams which often contain an unrealistic preponderance of giants. (Auth.)

THE TEACHERS ROLE IN FORMING PROPER BODY POSTURE

Directory of Open Access Journals (Sweden)

Zoran Bogdanović

2007-05-01

Full Text Available Being acquainted and well aware of the presence of physical deformation in school population, this study is based on the research of postural deformity of the pupils of the 5th grade of elementary school and determination of dependance of deformations appearance in relation to frequency of remonstration and indication to correct sitting position from proffesors’ perspective. The complete program content is conducted in the territory of the city of Kragujevac in several elementary schools comprising 299 students of the 5th grade. The object was to determine the number of students with kyphotic and lordotic deformity, to determine the presence of deformation in depandance of gender and to determine the presence of kyphotic and lordotic deformity in depandance of the frequency of proffesors indication to improper sitting. We can notice higher presence of kyphotic deformity at the probationers of male population that it is the case with female population while the higher presence of lordotic deformity is at female population.The highest number of probationers have reported that none of the proffesors warn them about proper sitting. The measures inside the groups sorted by gender qualifi cation, indicate on high percentage of both boys and girls who are not warned on proper sitting. Also, inside the groups of improper body holders, we can notice the most signifi cant kyphotic and lordotic deformity in the category of students who are never warned to sit properly. These indicators report us that is necessary to invest much more work on the education of parents and children as well as school stuff at the preschool and school institutions which would result in reducing the appearence and development of postural deformity at the population who is more liable to transformations of such kind.

A generalised Green-Julg theorem for proper groupoids and Banach algebras

OpenAIRE

Paravicini, Walther

2009-01-01

The Green-Julg theorem states that K_0^G(B) is isomorphic to K_0(L^1(G,B)) for every compact group G and every G-C*-algebra B. We formulate a generalisation of this result to proper groupoids and Banach algebras and deduce that the Bost assembly map is surjective for proper Banach algebras. On the way, we show that the spectral radius of an element in a C_0(X)-Banach algebra can be calculated from the spectral radius in the fibres.

CONTROL OF INDOOR ENVIRONMENTS VIA THE REGULATION OF BUILDING ENVELOPES

Directory of Open Access Journals (Sweden)

Mitja Košir

2011-01-01

Full Text Available The design of comfortable, healthy and stimulating indoor environments in buildings has a direct impact on the users and on energy consumption, as well as on the wider soci-economic environment of society.The indoor environment of buildings is defined with the formulation of the building envelope, which functions as an interface between the internal and external environments and its users. A properly designed, flexible and adequately controlled building envelope is a starting point in the formulation of a high-quality indoor environment. The systematic treatment of the indoor environment and building envelope from a user’s point of view represents an engineering approach that enables the holistic treatment of buildings, as well as integrated components and systems. The presented division of indoor environment in terms of visual, thermal, olfactory, acoustic and ergonomic sub-environments enables the classification and selection of crucial factors influencing design. This selection and classification can be implemented in the design, as well as in control applications of the building envelope. The implementation of the approach described is demonstrated with an example of an automated control system for the internal environment of an office in the building of the Faculty of Civil and Geodetic Engineering.

Treatment of Proper Name Retrieval Deficits in an Individual with Temporal Lobe Epilepsy

Science.gov (United States)

Minkina, Irene; Ojemann, Jeffrey G.; Grabowski, Thomas J.; Silkes, JoAnn P.; Phatak, Vaishali; Kendall, Diane L.

2013-01-01

Purpose: Studies investigating language deficits in individuals with left temporal-lobe epilepsy have consistently demonstrated impairments in proper name retrieval. The aim of this Phase I rehabilitation study was to investigate the effects of a linguistically distributed word retrieval treatment on proper name retrieval in an individual with…

EnableATIS strategy assessment.

Science.gov (United States)

2014-02-01

Enabling Advanced Traveler Information Systems (EnableATIS) is the traveler information component of the Dynamic Mobility Application (DMA) program. The objective of : the EnableATIS effort is to foster transformative traveler information application...

Optimization of active distribution networks: Design and analysis of significative case studies for enabling control actions of real infrastructure

Directory of Open Access Journals (Sweden)

Moneta Diana

2014-01-01

Full Text Available The diffusion of Distributed Generation (DG based on Renewable Energy Sources (RES requires new strategies to ensure reliable and economic operation of the distribution networks and to support the diffusion of DG itself. An advanced algorithm (DISCoVER – DIStribution Company VoltagE Regulator is being developed to optimize the operation of active network by means of an advanced voltage control based on several regulations. Starting from forecasted load and generation, real on-field measurements, technical constraints and costs for each resource, the algorithm generates for each time period a set of commands for controllable resources that guarantees achievement of technical goals minimizing the overall cost. Before integrating the controller into the telecontrol system of the real networks, and in order to validate the proper behaviour of the algorithm and to identify possible critical conditions, a complete simulation phase has started. The first step is concerning the definition of a wide range of “case studies”, that are the combination of network topology, technical constraints and targets, load and generation profiles and “costs” of resources that define a valid context to test the algorithm, with particular focus on battery and RES management. First results achieved from simulation activity on test networks (based on real MV grids and actual battery characteristics are given, together with prospective performance on real case applications.

Optimization of active distribution networks: Design and analysis of significative case studies for enabling control actions of real infrastructure

Science.gov (United States)

Moneta, Diana; Mora, Paolo; Viganò, Giacomo; Alimonti, Gianluca

2014-12-01

The diffusion of Distributed Generation (DG) based on Renewable Energy Sources (RES) requires new strategies to ensure reliable and economic operation of the distribution networks and to support the diffusion of DG itself. An advanced algorithm (DISCoVER - DIStribution Company VoltagE Regulator) is being developed to optimize the operation of active network by means of an advanced voltage control based on several regulations. Starting from forecasted load and generation, real on-field measurements, technical constraints and costs for each resource, the algorithm generates for each time period a set of commands for controllable resources that guarantees achievement of technical goals minimizing the overall cost. Before integrating the controller into the telecontrol system of the real networks, and in order to validate the proper behaviour of the algorithm and to identify possible critical conditions, a complete simulation phase has started. The first step is concerning the definition of a wide range of "case studies", that are the combination of network topology, technical constraints and targets, load and generation profiles and "costs" of resources that define a valid context to test the algorithm, with particular focus on battery and RES management. First results achieved from simulation activity on test networks (based on real MV grids) and actual battery characteristics are given, together with prospective performance on real case applications.

A PROPER MOTION STUDY OF THE HARO 6-10 OUTFLOW: EVIDENCE FOR A SUBARCSECOND BINARY

International Nuclear Information System (INIS)

Wilking, Bruce A.; Gerling, Bradley M.; Gibb, Erika; Marvel, Kevin B.; Claussen, Mark J.; Wootten, Alwyn

2012-01-01

We present single-dish and very long baseline interferometry observations of an outburst of water maser emission from the young binary system Haro 6-10. Haro 6-10 lies in the Taurus molecular cloud and contains a visible T Tauri star with an infrared companion 1.''3 north. Using the Very Long Baseline Array, we obtained five observations spanning three months and derived absolute positions for 20 distinct maser spots. Three of the masers can be traced over three or more epochs, enabling us to extract absolute proper motions and tangential velocities. We deduce that the masers represent one side of a bipolar outflow that lies nearly in the plane of the sky with an opening angle of ∼45°. They are located within 50 mas of the southern component of the binary, the visible T Tauri star Haro 6-10S. The mean position angle on the sky of the maser proper motions (∼220°) suggests they are related to the previously observed giant Herbig-Haro (HH) flow which includes HH 410, HH 411, HH 412, and HH 184A-E. A previously observed HH jet and extended radio continuum emission (mean position angle of ∼190°) must also originate in the vicinity of Haro 6-10S and represent a second, distinct outflow in this region. We propose that a yet unobserved companion within 150 mas of Haro 6-10S is responsible for the giant HH/maser outflow while the visible star is associated with the HH jet. Despite the presence of H 2 emission in the spectrum of the northern component of the binary, Haro 6-10N, none of outflows/jets can be tied directly to this young stellar object.

A PROPER MOTION STUDY OF THE HARO 6-10 OUTFLOW: EVIDENCE FOR A SUBARCSECOND BINARY

Energy Technology Data Exchange (ETDEWEB)

Wilking, Bruce A.; Gerling, Bradley M.; Gibb, Erika [Department of Physics and Astronomy, University of Missouri-St. Louis, 1 University Boulevard, St. Louis, MO 63121 (United States); Marvel, Kevin B. [American Astronomical Society, 2000 Florida Avenue, NW, Suite 400, Washington, DC 20009 (United States); Claussen, Mark J. [National Radio Astronomy Observatory (NRAO), Array Operations Center, P.O. Box 0, 1003 Lopezville Road, Socorro, NM 87801 (United States); Wootten, Alwyn, E-mail: bwilking@umsl.edu, E-mail: bmg5333@truman.edu, E-mail: gibbe@umsl.edu, E-mail: marvel@aas.org, E-mail: mclausse@nrao.edu, E-mail: awootten@nrao.edu [NRAO, 520 Edgemont Road, Charlottesville, VA 22903-2475 (United States)

2012-07-10

We present single-dish and very long baseline interferometry observations of an outburst of water maser emission from the young binary system Haro 6-10. Haro 6-10 lies in the Taurus molecular cloud and contains a visible T Tauri star with an infrared companion 1.''3 north. Using the Very Long Baseline Array, we obtained five observations spanning three months and derived absolute positions for 20 distinct maser spots. Three of the masers can be traced over three or more epochs, enabling us to extract absolute proper motions and tangential velocities. We deduce that the masers represent one side of a bipolar outflow that lies nearly in the plane of the sky with an opening angle of {approx}45 Degree-Sign . They are located within 50 mas of the southern component of the binary, the visible T Tauri star Haro 6-10S. The mean position angle on the sky of the maser proper motions ({approx}220 Degree-Sign ) suggests they are related to the previously observed giant Herbig-Haro (HH) flow which includes HH 410, HH 411, HH 412, and HH 184A-E. A previously observed HH jet and extended radio continuum emission (mean position angle of {approx}190 Degree-Sign ) must also originate in the vicinity of Haro 6-10S and represent a second, distinct outflow in this region. We propose that a yet unobserved companion within 150 mas of Haro 6-10S is responsible for the giant HH/maser outflow while the visible star is associated with the HH jet. Despite the presence of H{sub 2} emission in the spectrum of the northern component of the binary, Haro 6-10N, none of outflows/jets can be tied directly to this young stellar object.

Knowing Our Neighbors: Four New Nearby High Proper Motion Systems

Science.gov (United States)

Bartlett, Jennifer L.; Lurie, John C.; Ianna, Philip A.; Riedel, Adric R.; Finch, Charlie T.; Winters, Jennifer G.; Jao, Wei-Chun; Subasavage, John P.; Henry, Todd J.

2017-01-01

Obtaining a well-understood, volume-limited (and ultimately volume-complete) sample of stellar systems within 25 pc is essential for determining the stellar luminosity function, the mass-luminosity relationship, the stellar velocity distribution, and the stellar multiplicity fraction. Such a sample also provides insight into the local star formation history. Towards that end, the Research Consortium On Nearby Stars (RECONS) team measures trigonometric parallaxes to establish which systems truly lie within the 25-pc radius of the Solar Neighborhood. Recent astrometric measurements with the CTIO/SMARTS 0.9-m telescope establish three high proper motion systems as members (2MASS J02511490-0352459, 2MASS J15345704-1418486, and 2MASS J09211410-2104446) and confirm a fourth (2MASS J23062928-0502285). All four proper motions exceed 0.9”/yr. 2MA0251 travels 2.1497±0.0009”/yr in 149.20±0.05° at a distance of 11.0±0.4 pc. 2M2306 moves 1.0344±0.0007”/yr in 118.50±0.08° at a distance of 12.7±0.2 pc. 2MA1534 goes 0.9726±0.0004”/yr in 251.50 ±0.05° at a distance of 10.93±0.10 pc. 2MA0921 shifts 0.9489±0.0003”/yr in 164.70±0.04° at a distance of 12.3±0.2 pc. The corresponding tangential velocities are 112.4, 62.4, 50.4, and 55.5 km/s whereas the median for parallaxes previously published by RECONS is 53 km/s. With radial velocities in the literature of -75.5 to 80.53 km/s, none of these is a candidate member of any young moving groups.To characterize these late M-early L systems more fully, RECONS obtained VRI photometry; their I -band magnitudes range from 14.10 to 16.55. Over their astrometric baselines of 7.75 to 8.99 years, these demonstrated long-term I-band variability of 0.0135 mag. or less, indicating they may be older systems.With each new confirmation, we come closer to completing the census of the Solar Neighborhood.NSF grants AST 05-07711 and AST 09-08402, NASA-SIM, Georgia State University, the University of Virginia, Hampden-Sydney College

77 FR 70484 - Preoperational Testing of Onsite Electric Power Systems To Verify Proper Load Group Assignments...

Science.gov (United States)

2012-11-26

...-1294, ``Preoperational Testing of On-Site Electric Power Systems to Verify Proper Load Group... entitled ``Preoperational Testing of On- Site Electric Power Systems to Verify Proper Load Group... Electric Power Systems to Verify Proper Load Group Assignments, Electrical Separation, and Redundancy...

The importance of proper crystal-chemical and geometrical reasoning demonstrated using layered single and double hydroxides

International Nuclear Information System (INIS)

Richardson, Ian G.

2013-01-01

The importance and utility of proper crystal-chemical and geometrical reasoning in structural studies is demonstrated through the consideration of layered single and double hydroxides. New yet fundamental information is provided and it is evident that the crystal chemistry of the double hydroxide phases is much more straightforward than is apparent from the literature. Atomistic modelling techniques and Rietveld refinement of X-ray powder diffraction data are widely used but often result in crystal structures that are not realistic, presumably because the authors neglect to check the crystal-chemical plausibility of their structure. The purpose of this paper is to reinforce the importance and utility of proper crystal-chemical and geometrical reasoning in structural studies. It is achieved by using such reasoning to generate new yet fundamental information about layered double hydroxides (LDH), a large, much-studied family of compounds. LDH phases are derived from layered single hydroxides by the substitution of a fraction (x) of the divalent cations by trivalent. Equations are derived that enable calculation of x from the a parameter of the unit cell and vice versa, which can be expected to be of widespread utility as a sanity test for extant and future structure determinations and computer simulation studies. The phase at x = 0 is shown to be an α form of divalent metal hydroxide rather than the β polymorph. Crystal-chemically sensible model structures are provided for β-Zn(OH) 2 and Ni- and Mg-based carbonate LDH phases that have any trivalent cation and any value of x, including x = 0 [i.e. for α-M(OH) 2 ·mH 2 O phases

UCAC3 PROPER MOTION SURVEY. II. DISCOVERY OF NEW PROPER MOTION STARS IN UCAC3 WITH 0.''40 yr–1 > μ ≥ 0.''18 yr–1 BETWEEN DECLINATIONS –47° and 00°

International Nuclear Information System (INIS)

Finch, Charlie T.; Zacharias, Norbert; Boyd, Mark R.; Henry, Todd J.; Hambly, Nigel C.

2012-01-01

We present 474 new proper motion stellar systems in the southern sky having no previously known components, with 0.''40 yr –1 >μ ≥ 0.''18 yr –1 between declinations –47° and 0°. In this second paper utilizing the U.S. Naval Observatory third CCD Astrograph Catalog (UCAC3) we complete our sweep of the southern sky for objects in the proper motion range targeted by this survey with R magnitudes ranging from 9.80 to 19.61. The new systems contribute a ∼16% increase in the number of new stellar systems for the same region of sky reported in previous SuperCOSMOS Research Consortium On Nearby Stars (RECONS) surveys. Among the newly discovered stellar systems are 16 multiples, plus an additional ten components that are new common proper motion companions to previously known objects. A comparison of UCAC3 proper motions to those from Hipparcos, Tycho-2, Southern Proper Motion, and SuperCOSMOS indicates that all proper motions are consistent to ∼10 mas yr –1 , with the exception of SuperCOSMOS. Distance estimates are derived for all stellar systems having SuperCOSMOS Sky Survey B J , R 59F , and I IVN plate magnitudes and Two Micron All Sky Survey (2MASS) infrared photometry. We find five new red dwarf systems estimated to be within 25 pc. These discoveries support results from previous proper motion surveys suggesting that more nearby stellar systems are to be found, particularly in the fainter, slower moving samples. In this second paper utilizing the UCAC3 we complete our sweep of the southern sky for objects in the proper motion range targeted by this survey with R magnitudes ranging from 9.80 to 19.61.

Information Superiority generated through proper application of Geoinformatics

Science.gov (United States)

Teichmann, F.

2012-04-01

Information Superiority generated through proper application of Geoinformatics Information management and especially geoscience information delivery is a very delicate task. If it is carried out successfully, geoscientific data will provide the main foundation of Information Superiority. However, improper implementation of geodata generation, assimilation, distribution or storage will not only waste valuable resources like manpower or money, but could also give rise to crucial deficiency in knowledge and might lead to potentially extremely harmful disasters or wrong decisions. Comprehensive Approach, Effect Based Operations and Network Enabled Capabilities are the current buzz terms in the security regime. However, they also apply to various interdisciplinary tasks like catastrophe relief missions, civil task operations or even in day to day business operations where geo-science data is used. Based on experience in the application of geoscience data for defence applications the following procedure or tool box for generating geodata should lead to the desired information superiority: 1. Understand and analyse the mission, the task and the environment for which the geodata is needed 2. Carry out a Information Exchange Requirement between the user or customer and the geodata provider 3. Implementation of current interoperability standards and a coherent metadata structure 4. Execute innovative data generation, data provision, data assimilation and data storage 5. Apply a cost-effective and reasonable data life cycle 6. Implement IT security by focusing of the three pillar concepts Integrity, Availability and Confidentiality of the critical data 7. Draft and execute a service level agreement or a memorandum of understanding between the involved parties 8. Execute a Continuous Improvement Cycle These ideas from the IT world should be transferred into the geoscience community and applied in a wide set of scenarios. A standardized approach of how to generate, provide

Proper Lens Care (A Minute of Health with CDC)

Centers for Disease Control (CDC) Podcasts

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. This podcast discusses the importance of proper lens hygiene and maintenance.

Machine learning and predictive data analytics enabling metrology and process control in IC fabrication

Science.gov (United States)

Rana, Narender; Zhang, Yunlin; Wall, Donald; Dirahoui, Bachir; Bailey, Todd C.

2015-03-01

Integrate circuit (IC) technology is going through multiple changes in terms of patterning techniques (multiple patterning, EUV and DSA), device architectures (FinFET, nanowire, graphene) and patterning scale (few nanometers). These changes require tight controls on processes and measurements to achieve the required device performance, and challenge the metrology and process control in terms of capability and quality. Multivariate data with complex nonlinear trends and correlations generally cannot be described well by mathematical or parametric models but can be relatively easily learned by computing machines and used to predict or extrapolate. This paper introduces the predictive metrology approach which has been applied to three different applications. Machine learning and predictive analytics have been leveraged to accurately predict dimensions of EUV resist patterns down to 18 nm half pitch leveraging resist shrinkage patterns. These patterns could not be directly and accurately measured due to metrology tool limitations. Machine learning has also been applied to predict the electrical performance early in the process pipeline for deep trench capacitance and metal line resistance. As the wafer goes through various processes its associated cost multiplies. It may take days to weeks to get the electrical performance readout. Predicting the electrical performance early on can be very valuable in enabling timely actionable decision such as rework, scrap, feedforward, feedback predicted information or information derived from prediction to improve or monitor processes. This paper provides a general overview of machine learning and advanced analytics application in the advanced semiconductor development and manufacturing.

What is the proper evaluation method: Some basic considerations

International Nuclear Information System (INIS)

Leeb, Helmut; Schnabel, Georg; Srdinko, Thomas

2014-01-01

Recent developments and applications demand for an extension of the energy range and the inclusion of reliable uncertainty information in nuclear data libraries. Due to the scarcity of neutron-induced reaction data beyond 20 MeV the extension of the energy range up to at least 150 MeV is not trivial because the corresponding nuclear data evaluations depend heavily on nuclear models and proper evaluation methods are still under discussion. Restricting to evaluation techniques based on Bayesian statistics the influence of the a priori knowledge on the final result of the evaluation is considered. The study clearly indicates the need to account properly for the deficiencies of the nuclear model. Concerning the covariance matrices it is argued that they depend not only on the model, but also on the method of generation and an additional consent is required for the comparison of different evaluations of the same data sets. (authors)

Controlled Environments Enable Adaptive Management in Aquatic Ecosystems Under Altered Environments

Science.gov (United States)

Bubenheim, David L.

2016-01-01

Ecosystems worldwide are impacted by altered environment conditions resulting from climate, drought, and land use changes. Gaps in the science knowledge base regarding plant community response to these novel and rapid changes limit both science understanding and management of ecosystems. We describe how CE Technologies have enabled the rapid supply of gap-filling science, development of ecosystem simulation models, and remote sensing assessment tools to provide science-informed, adaptive management methods in the impacted aquatic ecosystem of the California Sacramento-San Joaquin River Delta. The Delta is the hub for California's water, supplying Southern California agriculture and urban communities as well as the San Francisco Bay area. The changes in environmental conditions including temperature, light, and water quality and associated expansion of invasive aquatic plants negatively impact water distribution and ecology of the San Francisco Bay/Delta complex. CE technologies define changes in resource use efficiencies, photosynthetic productivity, evapotranspiration, phenology, reproductive strategies, and spectral reflectance modifications in native and invasive species in response to altered conditions. We will discuss how the CE technologies play an enabling role in filling knowledge gaps regarding plant response to altered environments, parameterization and validation of ecosystem models, development of satellite-based, remote sensing tools, and operational management strategies.

Radial velocities for the HIPPARCOS-Gaia Hundred-Thousand-Proper-Motion project

Science.gov (United States)

de Bruijne, J. H. J.; Eilers, A.-C.

2012-10-01

Context. The Hundred-Thousand-Proper-Motion (HTPM) project will determine the proper motions of ~113 500 stars using a ~23-year baseline. The proper motions will be based on space-based measurements exclusively, with the Hipparcos data, with epoch 1991.25, as first epoch and with the first intermediate-release Gaia astrometry, with epoch ~2014.5, as second epoch. The expected HTPM proper-motion standard errors are 30-190 μas yr-1, depending on stellar magnitude. Aims: Depending on the astrometric characteristics of an object, in particular its distance and velocity, its radial velocity can have a significant impact on the determination of its proper motion. The impact of this perspective acceleration is largest for fast-moving, nearby stars. Our goal is to determine, for each star in the Hipparcos catalogue, the radial-velocity standard error that is required to guarantee a negligible contribution of perspective acceleration to the HTPM proper-motion precision. Methods: We employ two evaluation criteria, both based on Monte-Carlo simulations, with which we determine which stars need to be spectroscopically (re-)measured. Both criteria take the Hipparcos measurement errors into account. The first criterion, the Gaussian criterion, is applicable to nearby stars. For distant stars, this criterion works but returns overly pessimistic results. We therefore use a second criterion, the robust criterion, which is equivalent to the Gaussian criterion for nearby stars but avoids biases for distant stars and/or objects without literature radial velocity. The robust criterion is hence our prefered choice for all stars, regardless of distance. Results: For each star in the Hipparcos catalogue, we determine the confidence level with which the available radial velocity and its standard error, taken from the XHIP compilation catalogue, are acceptable. We find that for 97 stars, the radial velocities available in the literature are insufficiently precise for a 68.27% confidence

Twisted equivariant K-theory, groupoids and proper actions

OpenAIRE

Cantarero, Jose

2009-01-01

In this paper we define twisted equivariant K-theory for actions of Lie groupoids. For a Bredon-compatible Lie groupoid, this defines a periodic cohomology theory on the category of finite CW-complexes with equivariant stable projective bundles. A classification of these bundles is shown. We also obtain a completion theorem and apply these results to proper actions of groups.

Optimizing chain life in bucket elevators through proper design and elongation measurement

Energy Technology Data Exchange (ETDEWEB)

Luglio, J.J. [Rexnord, Inc., Milwaukee, WI (United States)

2001-04-01

Since down time in the bulk solids handling industry is so expensive, bucket elevators must operate with extreme reliability, and, of course, the cost per ton of material conveyed must be minimized. This means balancing initial costs, operating and maintenance costs as well as minimizing the inventory of parts required in order to insure reliability. The elevator must be designed properly for each application. It must also be operated and maintained properly. (orig.)

The importance of proper administration and interpretation of neuropsychological baseline and postconcussion computerized testing.

Science.gov (United States)

Moser, Rosemarie Scolaro; Schatz, Philip; Lichtenstein, Jonathan D

2015-01-01

Media coverage, litigation, and new legislation have resulted in a heightened awareness of the prevalence of sports concussion in both adult and youth athletes. Baseline and postconcussion testing is now commonly used for the assessment and management of sports-related concussion in schools and in youth sports leagues. With increased use of computerized neurocognitive sports concussion testing, there is a need for standards for proper administration and interpretation. To date, there has been a lack of standardized procedures by which assessments are administered. More specifically, individuals who are not properly trained often interpret test results, and their methods of interpretation vary considerably. The purpose of this article is to outline factors affecting the validity of test results, to provide examples of misuse and misinterpretation of test results, and to communicate the need to administer testing in the most effective and useful manner. An increase in the quality of test administration and application may serve to decrease the prevalence of invalid test results and increase the accuracy and utility of baseline test results if an athlete sustains a concussion. Standards for test use should model the American Psychological Association and Centers for Disease Control and Prevention guidelines, as well as the recent findings of the joint position paper on computerized neuropsychological assessment devices.

Android Security Framework: Enabling Generic and Extensible Access Control on Android

OpenAIRE

Backes, Michael; Bugiel, Sven; Gerling, Sebastian; von Styp-Rekowsky, Philipp

2014-01-01

We introduce the Android Security Framework (ASF), a generic, extensible security framework for Android that enables the development and integration of a wide spectrum of security models in form of code-based security modules. The design of ASF reflects lessons learned from the literature on established security frameworks (such as Linux Security Modules or the BSD MAC Framework) and intertwines them with the particular requirements and challenges from the design of Android's software stack. ...

Corrections to the Hipparcos proper motions in declination for 807 stars

Directory of Open Access Journals (Sweden)

Damljanović G.

2008-01-01

Full Text Available We used the data on latitude variations obtained from observations with 10 classical photographic zenith tubes (PZT in order to improve the Hipparcos proper motions in declinations µδ for 807 stars. Part of observing programmes, carried out during the last century for the purpose of studying the Earth's rotation, were realized by using PZT instruments. These observations were performed within in the intervals (tens of years much longer than that of the Hipparcos mission (less than 4 years. In addition, the annual number of observations for every PZT programme star is several hundreds on the average. Though the accuracy of the star coordinates in the Hipparcos Catalogue is by two orders of magnitude better than that of the star coordinates from the PZT observations, the large number of observations performed a much longer time interval makes it possible to correct the Hipparcos proper motions and to improve their accuracy with respect to the accuracy given in the Hipparcos Catalogue. Long term examinations of latitude and time variations were used to form the Earth Orientation Catalogue (EOC-2, aimed at a more accurate determination of positions and proper motions for the stars included. Our method of calculating the corrections of the proper motions in declination from the latitude variations is different from the method used in obtaining the EOC-2 Catalogue. Comparing the results we have established a good agreement between our µδ and the EOC-2 ones for the star sample used in the present paper.

Corrections to the Hipparcos Proper Motions in Declination for 807 Stars

Directory of Open Access Journals (Sweden)

Damljanović, G.

2008-12-01

Full Text Available We used the data on latitude variations obtained from observations with 10 classical photographic zenith tubes (PZT in order to improve the Hipparcos proper motions in declinations $mu_{delta} $ for 807 stars. Part of observing programmes, carried out during the last century for the purpose of studying the Earth's rotation, were realized by using PZT instruments. These observations were performed within in the intervals (tens of years much longer than that of the Hipparcos mission (less than 4 years. In addition, the annual number of observations for every PZT-programme star is several hundreds on the average. Though the accuracy of the star coordinates in the Hipparcos Catalogue is by two orders of magnitude better than that of the star coordinates from the PZT observations, the large number of observations performed a much longer time interval makes it possible to correct the Hipparcos proper motions and to improve their accuracy with respect to the accuracy given in the Hipparcos Catalogue. Long term examinations of latitude and time variations were used to form the Earth Orientation Catalogue (EOC-2, aimed at a more accurate determination of positions and proper motions for the stars included. Our method of calculating the corrections of the proper motions in declination from the latitude variations is different from the method used in obtaining the EOC-2 Catalogue. Comparing the results we have established a good agreement between our $mu_ {delta} $ and the EOC-2 ones for the star sample used in the present paper.

MEASURING THE UNDETECTABLE: PROPER MOTIONS AND PARALLAXES OF VERY FAINT SOURCES

International Nuclear Information System (INIS)

Lang, Dustin; Hogg, David W.; Jester, Sebastian; Rix, Hans-Walter

2009-01-01

The near future of astrophysics involves many large solid-angle, multi-epoch, multiband imaging surveys. These surveys will, at their faint limits, have data on a large number of sources that are too faint to be detected at any individual epoch. Here, we show that it is possible to measure in multi-epoch data not only the fluxes and positions, but also the parallaxes and proper motions of sources that are too faint to be detected at any individual epoch. The method involves fitting a model of a moving point source simultaneously to all imaging, taking account of the noise and point-spread function (PSF) in each image. By this method it is possible to measure the proper motion of a point source with an uncertainty close to the minimum possible uncertainty given the information in the data, which is limited by the PSF, the distribution of observation times (epochs), and the total signal-to-noise in the combined data. We demonstrate our technique on multi-epoch Sloan Digital Sky Survey (SDSS) imaging of the SDSS Southern Stripe (SDSSSS). We show that with our new technique we can use proper motions to distinguish very red brown dwarfs from very high-redshift quasars in these SDSS data, for objects that are inaccessible to traditional techniques, and with better fidelity than by multiband imaging alone. We rediscover all 10 known brown dwarfs in our sample and present nine new candidate brown dwarfs, identified on the basis of significant proper motion.

Can a Proper T-Cell Development Occur in an Altered Thymic Epithelium? Lessons From EphB-Deficient Thymi

Directory of Open Access Journals (Sweden)

Juan José Muñoz

2018-04-01

Full Text Available For a long time, the effects of distinct Eph tyrosine kinase receptors and their ligands, ephrins on the structure, immunophenotype, and development of thymus and their main cell components, thymocytes (T and thymic epithelial cells (TECs, have been studied. In recent years, the thymic phenotype of mutant mice deficient in several Ephs and ephrins B has been determined. Remarkably, thymic stroma in these animals exhibits important defects that appear early in ontogeny but little alterations in the proportions of distinct lymphoid cell populations. In the present manuscript, we summarize and extend these results discussing possible mechanisms governing phenotypical and functional thymocyte maturation in an absence of the critical T–TEC interactions, concluding that some signaling mediated by key molecules, such as MHCII, CD80, β5t, Aire, etc. could be sufficient to enable a proper maturation of thymocytes, independently of morphological alterations affecting thymic epithelium.

Possible Relativistic Definitions of Parallax, Proper Motion and Radial Velocity

National Research Council Canada - National Science Library

Klioner, S

2000-01-01

.... In this paper, the authors briefly describe a relativistic model of space-based optical positional observations valid at a high level of accuracy, and suggest definitions of parallax, proper motion...

Dexterity test data contribute to proper glovebox over-glove use

International Nuclear Information System (INIS)

Cournoyer, Michael E.; Lawton, Cindy M.; Castro, Armanda M.; Costigan, Stephen A.; Apel, D.M.; Neal, G.E.; Castro, J.M.; Michelotti, R.A.

2010-01-01

Programmatic operations at the Los Alamos National Laboratory Plutonium Facility (TA-55) involve working with various amounts of plutonium and other highly toxic, alpha-emitting materials. The spread of radiological contamination on surfaces, airborne contamination, and excursions of contaminants into the operator's breathing zone are prevented through the use of a variety of gloveboxes (the glovebox, coupled with an adequate negative pressure gradient, provides primary confinement). The glovebox gloves are the weakest part of this engineering control. The Glovebox Glove Integrity Program, which controls glovebox gloves from procurement to disposal at TA-55, manages this vulnerability. A key element of this program is to consider measures that lower the overall risk of glovebox operations. Proper selection of over-gloves is one of these measures. Line management owning glovebox processes have the responsibility to approve the appropriate personal protective equipment/glovebox glove/over-glove combination. As low as reasonably achievable (ALARA) considerations to prevent unplanned glovebox glove openings must be balanced with glove durability and worker dexterity, both of which affect the final overall risk to the worker. In this study, the causes of unplanned glovebox glove openings, the benefits of over-glove features, the effect of over-gloves on task performance using standard dexterity tests, the pollution prevention benefits, and the recommended over-gloves for a task are presented.

Toward genome-enabled mycology.

Science.gov (United States)

Hibbett, David S; Stajich, Jason E; Spatafora, Joseph W

2013-01-01

Genome-enabled mycology is a rapidly expanding field that is characterized by the pervasive use of genome-scale data and associated computational tools in all aspects of fungal biology. Genome-enabled mycology is integrative and often requires teams of researchers with diverse skills in organismal mycology, bioinformatics and molecular biology. This issue of Mycologia presents the first complete fungal genomes in the history of the journal, reflecting the ongoing transformation of mycology into a genome-enabled science. Here, we consider the prospects for genome-enabled mycology and the technical and social challenges that will need to be overcome to grow the database of complete fungal genomes and enable all fungal biologists to make use of the new data.

Smart Grid enabled heat pumps

DEFF Research Database (Denmark)

Carmo, Carolina; Detlefsen, Nina; Nielsen, Mads Pagh

2014-01-01

The transition towards a 100 % fossil-free energy system, while achieving extreme penetration levels of intermittent wind and solar power in electricity generation, requires demand-side technologies that are smart (intermittency-friendly) and efficient. The integration of Smart Grid enabling...... with an empirical study in order to achieve a number of recommendations with respect to technology concepts and control strategies that would allow residential vapor-compression heat pumps to support large-scale integration of intermittent renewables. The analysis is based on data gathered over a period of up to 3...

Proper Lens Care (A Cup of Health with CDC)

Centers for Disease Control (CDC) Podcasts

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. In this podcast, Dr. Jennifer Cope discusses the importance of proper lens hygiene and maintenance.

Proper Motion and Secular Variations of Keplerian Orbital Elements

Directory of Open Access Journals (Sweden)

Alexey G. Butkevich

2018-05-01

Full Text Available High-precision observations require accurate modeling of secular changes in the orbital elements in order to extrapolate measurements over long time intervals, and to detect deviation from pure Keplerian motion caused, for example, by other bodies or relativistic effects. We consider the evolution of the Keplerian elements resulting from the gradual change of the apparent orbit orientation due to proper motion. We present rigorous formulae for the transformation of the orbit inclination, longitude of the ascending node and argument of the pericenter from one epoch to another, assuming uniform stellar motion and taking radial velocity into account. An approximate treatment, accurate to the second-order terms in time, is also given. The proper motion effects may be significant for long-period transiting planets. These theoretical results are applicable to the modeling of planetary transits and precise Doppler measurements as well as analysis of pulsar and eclipsing binary timing observations.

Stochastic control and real options valuation of thermal storage-enabled demand response from flexible district energy systems

International Nuclear Information System (INIS)

Kitapbayev, Yerkin; Moriarty, John; Mancarella, Pierluigi

2015-01-01

Highlights: • We calculate the real option value of flexibility from CHP-thermal storage. • Stochastic optimal feedback control problem is solved under uncertain market prices. • Efficient real-time numerical solutions combine simulation, regression and recursion. • Clear, interpretable feedback control maps are produced for each hour of the day. • We give a realistic UK case study using projected market gas and electricity prices. - Abstract: In district energy systems powered by Combined Heat and Power (CHP) plants, thermal storage can significantly increase CHP flexibility to respond to real time market signals and therefore improve the business case of such demand response schemes in a Smart Grid environment. However, main challenges remain as to what is the optimal way to control inter-temporal storage operation in the presence of uncertain market prices, and then how to value the investment into storage as flexibility enabler. In this outlook, the aim of this paper is to propose a model for optimal and dynamic control and long term valuation of CHP-thermal storage in the presence of uncertain market prices. The proposed model is formulated as a stochastic control problem and numerically solved through Least Squares Monte Carlo regression analysis, with integrated investment and operational timescale analysis equivalent to real options valuation models encountered in finance. Outputs are represented by clear and interpretable feedback control strategy maps for each hour of the day, thus suitable for real time demand response under uncertainty. Numerical applications to a realistic UK case study with projected market gas and electricity prices exemplify the proposed approach and quantify the robustness of the selected storage solutions

Precedent Proper Names in Informal Oikonymy

Directory of Open Access Journals (Sweden)

Maria V. Akhmetova

2013-06-01

Full Text Available The paper deals with the Russian language informal city names (oikonyms motivated by other toponyms (with reference to Russia and the CIS. The author shows that the motivating proper name can replace the city name (e. g. Глазго < Glasgow ‘Glazov’ or contaminate with it (e. g. Экибостон < Ekibastuz + Boston, the “alien” onym being attracted to construct an informal oikonym due to its phonetic similarity or, on occasion, due to an affinity, either real or imaginary, between the two settlements. The author argues that the phonetic motivation is more characteristic for the modern urban tradition, than for popular dialects.

A properly adjusted forage harvester can save time and money

Science.gov (United States)

A properly adjusted forage harvester can save fuel and increase the realizable milk per ton of your silage. This article details the adjustments necessary to minimize energy while maximizing productivity and forage quality....

32 CFR 842.63 - Who are not proper claimants.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Who are not proper claimants. 842.63 Section 842.63 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE CLAIMS AND... accompanying US military and US national civilian employees. (c) Foreign military personnel suffering property...

Locale-Specific Categorization of IT Projects for Proper Project Management

Directory of Open Access Journals (Sweden)

Muhammad Nasir

2015-12-01

Full Text Available In this paper we aim to show that not only are the project management techniques important for small-scale projects, but following proper project management techniques is one of the most important requirements. However, there come slight variations in implementing project management techniques in small projects as compared with larger projects. Therefore, proper categorization of projects holds the key to success in many situations. Our paper will show that categorization of a project as small-scale or large-scale should always be locale specific. In this regards, we develop a criteria and evaluate how the projects are categorized as small-scale and large-scale in different parts of the world with focus on IT projects. This research concludes that some methods cannot be used for projects of different scales.

Femtosecond laser enabled keratoplasty for advanced keratoconus

Directory of Open Access Journals (Sweden)

Yathish Shivanna

2013-01-01

Full Text Available Purpose : To assess the efficacy and advantages of femtosecond laser enabled keratoplasty (FLEK over conventional penetrating keratoplasty (PKP in advanced keratoconus. Materials and Methods: Detailed review of literature of published randomized controlled trials of operative techniques in PKP and FLEK. Results: Fifteen studies were identified, analyzed, and compared with our outcome. FLEK was found to have better outcome in view of better and earlier stabilization uncorrected visual acuity (UCVA, best corrected visual acuity (BCVA, and better refractive outcomes with low astigmatism as compared with conventional PKP. Wound healing also was noticed to be earlier, enabling early suture removal in FLEK. Conclusions: Studies relating to FLEK have shown better results than conventional PKP, however further studies are needed to assess the safety and intraoperative complications of the procedure.

New oil condition monitoring system, Wearsens® enables continuous, online detection of critical operating conditions and wear damage

Directory of Open Access Journals (Sweden)

Manfred Mauntz

2015-12-01

Full Text Available A new oil sensor system is presented for the continuous, online measurement of the wear in turbines, industrial gears, generators, hydraulic systems and transformers. Detection of change is much earlier than existing technologies such as particle counting, vibration measurement or recording temperature. Thus targeted, corrective procedures and/or maintenance can be carried out before actual damage occurs. Efficient machine utilization, accurately timed preventive maintenance, increased service life and a reduction of downtime can all be achieved. The presented sensor system effectively controls the proper operation conditions of bearings and cogwheels in gears. The online diagnostics system measures components of the specific complex impedance of oils. For instance, metal abrasion due to wear debris, broken oil molecules, forming acids or oil soaps, result in an increase of the electrical conductivity, which directly correlates with the degree of contamination of the oil. For additivated lubricants, the stage of degradation of the additives can also be derived from changes in the dielectric constant. The determination of impurities or reduction in the quality of the oil and the quasi continuous evaluation of wear and chemical aging follow the holistic approach of a real-time monitoring of an alteration in the condition of the oil-machine system. Once the oil condition monitoring sensors are installed on the wind turbine, industrial gearbox and test stands, the measuring data can be displayed and evaluated elsewhere. The signals are transmitted to a web-based condition monitoring system via LAN, WLAN or serial interfaces of the sensor unit. Monitoring of the damage mechanisms during proper operation below the tolerance limits of the components enables specific preventive maintenance independent of rigid inspection intervals.

Demographic factors and retrieval of object and proper names after age 70.

Directory of Open Access Journals (Sweden)

Gitit Kavé

Full Text Available This research aimed to investigate whether demographic factors are similarly related to retrieval of object and proper names.The sample included 5,907 individuals above age 70 who participated in the Health and Retirement Study between 2004 and 2012. Participants were asked to name two objects as well as the US President and Vice President. Latent growth curve models examined the associations of age, education, and self-rated health with baseline levels and change trajectories in retrieval.Age and education were more strongly related to retrieval of proper names than to retrieval of object names, both for baseline scores and for change trajectory. Similar effects of self-rated health emerged for both types of stimuli.The results show that examining object names and proper names together as indication of cognitive status in the HRS might overlook important differences between the two types of stimuli, in both baseline performance and longitudinal change.

Fast algorithms for finding proper strategies in game trees

DEFF Research Database (Denmark)

Miltersen, Peter Bro; Sørensen, Troels Bjerre

2008-01-01

We show how to find a normal form proper equilibrium in behavior strategies of a given two-player zero-sum extensive form game with imperfect information but perfect recall. Our algorithm solves a finite sequence of linear programs and runs in polynomial time. For the case of a perfect informatio...

Improved proper name recall in aging after electrical stimulation of the anterior temporal lobes

Directory of Open Access Journals (Sweden)

Lars A Ross

2011-10-01

Full Text Available Evidence from neuroimaging and neuropsychology suggests that portions of the anterior temporal lobes play a critical role in proper name retrieval. We previously found that anodal transcranial direct current stimulation (tDCS to the anterior temporal lobes improved retrieval of proper names in young adult. Here we extend that finding to older adults who tend to experience greater proper-naming deficits than young adults. The task was to look at pictures of famous faces or landmarks and verbally recall the associated proper name. Our results show a numerical improvement in face naming after left or right anterior temporal lobe stimulation, but a statistically significant effect only after left-lateralized stimulation. The magnitude of the enhancing effect was similar in older and younger adults but the lateralization of the effect differed depending on age. These results provide evidence that tDCS may be a useful tool for the neurorehabilitation of cognitive function in healthy and pathological cognitive decline.

Towards the Proper Integration of Extra-Functional Requirements

OpenAIRE

Elke Hochmuller

1999-01-01

In spite of the many achievements in software engineering, proper treatment of extra-functional requirements (also known as non-functional requirements) within the software development process is still a challenge to our discipline. The application of functionality-biased software development methodologies can lead to major contradictions in the joint modelling of functional and extra-functional requirements. Based on a thorough discussion on the nature of extra-functional requirements as wel...

Maximizing Power Output in Homogeneous Charge Compression Ignition (HCCI) Engines and Enabling Effective Control of Combustion Timing

Science.gov (United States)

Saxena, Samveg

Homogeneous Charge Compression Ignition (HCCI) engines are one of the most promising engine technologies for the future of energy conversion from clean, efficient combustion. HCCI engines allow high efficiency and lower CO2 emission through the use of high compression ratios and the removal of intake throttle valves (like Diesel), and allow very low levels of urban pollutants like nitric oxide and soot (like Otto). These engines, however, are not without their challenges, such as low power density compared with other engine technologies, and a difficulty in controlling combustion timing. This dissertation first addresses the power output limits. The particular strategies for enabling high power output investigated in this dissertation focus on avoiding five critical limits that either damage an engine, drastically reduce efficiency, or drastically increase emissions: (1) ringing limits, (2) peak in-cylinder pressure limits, (3) misfire limits, (4) low intake temperature limits, and (5) excessive emissions limits. The research shows that the key factors that enable high power output, sufficient for passenger vehicles, while simultaneously avoiding the five limits defined above are the use of: (1) high intake air pressures allowing improved power output, (2) highly delayed combustion timing to avoid ringing limits, and (3) using the highest possible equivalence ratio before encountering ringing limits. These results are revealed by conducting extensive experiments spanning a wide range of operating conditions on a multi-cylinder HCCI engine. Second, this dissertation discusses strategies for effectively sensing combustion characteristics on a HCCI engine. For effective feedback control of HCCI combustion timing, a sensor is required to quantify when combustion occurs. Many laboratory engines use in-cylinder pressure sensors but these sensors are currently prohibitively expensive for wide-scale commercialization. Instead, ion sensors made from inexpensive sparkplugs

Simulation Control Graphical User Interface Logging Report

Science.gov (United States)

Hewling, Karl B., Jr.

2012-01-01

One of the many tasks of my project was to revise the code of the Simulation Control Graphical User Interface (SIM GUI) to enable logging functionality to a file. I was also tasked with developing a script that directed the startup and initialization flow of the various LCS software components. This makes sure that a software component will not spin up until all the appropriate dependencies have been configured properly. Also I was able to assist hardware modelers in verifying the configuration of models after they have been upgraded to a new software version. I developed some code that analyzes the MDL files to determine if any error were generated due to the upgrade process. Another one of the projects assigned to me was supporting the End-to-End Hardware/Software Daily Tag-up meeting.

QoS Enabled Resource Allocation Over an UPnP-QoS - GMPLS Controlled Edge

DEFF Research Database (Denmark)

Brewka, Lukasz Jerzy; Sköldström, Pontus; Gavler, Anders

2011-01-01

This paper focuses on the problem of coherent resource allocation within home and access networks. The interdomain QoS signaling discussed here enables the initiation of the QoS provisioning in the home and access from the end device in users home. The home network considered in this paper is UPn......P-QoS enabled while the access network is GMPLS based. We propose and implement an interface between aforementioned network segments allowing for end-to-end QoS establishment. We present the QoS parameters and mechanisms in both UPnP-QoS and GMPLS and how they can be matched to create a coherent Qo...

Machine safety: proper safeguarding techniques.

Science.gov (United States)

Martin, K J

1992-06-01

1. OSHA mandates certain safeguarding of machinery to prevent accidents and protect machine operators. OSHA specifies moving parts that must be guarded and sets criteria for the guards. 2. A 1989 OSHA standard for lockout/tagout requires locking the energy source during maintenance, periodically inspecting for power transmission, and training maintenance workers. 3. In an amputation emergency, first aid for cardiopulmonary resuscitation, shock, and bleeding are the first considerations. The amputated part should be wrapped in moist gauze, placed in a sealed plastic bag, and placed in a container of 50% water and 50% ice for transport. 4. The role of the occupational health nurse in machine safety is to conduct worksite analyses to identify proper safeguarding and to communicate deficiencies to appropriate personnel; to train workers in safe work practices and observe compliance in the use of machine guards; to provide care to workers injured by machines; and to reinforce safe work practices among machine operators.

3D Vision Based Landing Control of a Small Scale Autonomous Helicopter

Directory of Open Access Journals (Sweden)

Zhenyu Yu

2007-03-01

Full Text Available Autonomous landing is a challenging but important task for Unmanned Aerial Vehicles (UAV to achieve high level of autonomy. The fundamental requirement for landing is the knowledge of the height above the ground, and a properly designed controller to govern the process. This paper presents our research results in the study of landing an autonomous helicopter. The above-the-ground height sensing is based on a 3D vision system. We have designed a simple plane-fitting method for estimating the height over the ground. The method enables vibration free measurement with the camera rigidly attached on the helicopter without using complicated gimbal or active vision mechanism. The estimated height is used by the landing control loop. Considering the ground effect during landing, we have proposed a two-stage landing procedure. Two controllers are designed for the two landing stages respectively. The sensing approach and control strategy has been verified in field flight test and has demonstrated satisfactory performance.

PROPER MOTIONS OF THE HH 110/270 SYSTEM

International Nuclear Information System (INIS)

Kajdič, P.; Reipurth, B.; Walawender, J.; Raga, A. C.; Bally, J.

2012-01-01

We present a study of the HH 110/270 system based on three sets of optical images obtained with the ESO New Technology Telescope, the Subaru Telescope, and the Hubble Space Telescope (HST). The ground-based observations are made in the Hα and [S II] emission lines and the HST observations are made in the Hα line only. Ground-based observations reveal the existence of nine knots, which have not been previously discussed and offer some important insight into the HH 110/270 history. We perform a kinematic study of the HH 110/270 system and an analysis of its emission properties. We measure proper motions of all the knots in the system. Four of the newly identified knots belong to the HH 270 jet. Their positions indicate that the jet's axis changed its direction in the past. We speculate that similar changes may have occurred many times in the past and this could be part of the reason for the unusual structure of the HH 110 jet. The HST observations allow us to resolve individual knots into their substructures and to measure their proper motions. These measurements show that the knots are highly turbulent structures. Finally, we report the discovery of four new Herbig-Haro (HH) objects located near the HH 110/270 system.

Computer simulation of nuclear reactor control by means of heuristic learning controller

International Nuclear Information System (INIS)

Bubak, M.; Moscinski, J.

1976-01-01

A trial of application of two techniques of Artificial Intelligence: heuristic Programming and Learning Machines Theory for nuclear reactor control is presented. Considering complexity of the mathematical models describing satisfactorily the nuclear reactors, value changes of these models parameters in course of operation, knowledge of some parameters value with too small exactness, there appear diffucluties in the classical approach application for these objects control systems design. The classical approach consists in definition of the permissible control actions set on the base of the set performance index and the object mathematical model. The Artificial Intelligence methods enable construction of the control system, which gets during work an information being a priori inaccessible and uses it for its action change for the control to be the optimum one. Applying these methods we have elaborated the reactor power control system. As the performance index there has been taken the integral of the error square. For the control system there are only accessible: the set power trajectory, the reactor power and the control rod position. The set power trajectory has been divided into time intervals called heuristic intervals. At the beginning of every heuristic interval, on the base of the obtained experience, the control system chooses from the control (heuristic) set the optimum control. The heuristic set it is the set of relations between the control rod rate and the state variables, the set and the obtained power, similar to simplifications applied by nuclear reactors operators. The results obtained for the different control rod rates and different reactor (simulated on the digital computer) show the proper work of the system. (author)

Street canyon ventilation control by proper planning and development

Directory of Open Access Journals (Sweden)

Balakin Vladimir Vasil'evich

2014-05-01

Full Text Available The objective of street canyon ventilation control in major streets is a tool of air pollution prevention in them, protection of housing areas from excessive wind or preservation and intensification of existing wind speed in case of insufficient ventilation. The maximum permissible concentration of car exhaust pollutants with wind speed within comfortable and permissible values by physiological and hygienic criteria, are ensured as from 40 to 70 % of thoroughfares in major cities. The dependence of air pollution level on wind speed is comparable to its dependence on traffic intensity and ratio of buildings height (H to street width. But one has to take into account that, if the wind blows across the street, vortices form within the street canyon, which results in higher concentration of car exhaust pollutants near the downwind buildings. The objective of this work is to find the functional dependences of wind speed in a major street on its width and density of buildings, and also to find out which street configurations are favorable for formation of closed air circulation within it, resulting in insufficient aeration. The experimental research was done on a site for large-scale modeling of built-up urban territory, using cup anemometers. The coefficients of dependence of wind speed within a street on the types of buildings and on the street width were obtained. Characteristics of street layouts for control of aeration were determined. Building density rates for maximizing or optimizing the wind speed were determined. Street layouts are considered where stable vortices form between the buildings. For example, vortices within the street canyon’s cross-section appear when buildings squarish in ground plan situated far apart are replaced by oblong ones with the minimum allowed intervals of 15 meters between them (for 5-storeyed buildings; or intervals equal to the buildings’ height, or where the buildings are long and close together. With

THE PROBLEM OF PROPER CARGO SECURING IN ROAD TRANSPORT – CASE STUDY

Directory of Open Access Journals (Sweden)

Maria CIEŚLA

2013-12-01

Full Text Available This paper presents the problem of improper security of cargo in trucks as the cause of about 25% of the accidents that takes place in road transport. Attention was drawn to aspects of legal liability for errors resulting from incorrect load securing according to polish law. Article was enriched with practical examples illustrating the effects of improper cargo securing on transport unit and shows how it had to be prepared properly. When planning the proper transport protection of metal sheets rolled both calculation methods and computer applications were used.

NATIONAL EXPERIENCES REGARDING CORPORATE GOVERNANCE PROPER PRACTICE CODES

Directory of Open Access Journals (Sweden)

Durgheu Liliana

2010-12-01

Full Text Available This paper is about the principles of proper governance codes, which even tough have blossomed in all parts of the world for more than a decade, the degree in which companies adopt the codes vary in different countries, and the decision to adopt a certain code does not automatically guarranty efficient corporate governance. The paper trys to identify the mechanisms needed for implementing the codes and that will lead to higher efficiency.

Taxonomic and Thematic Organisation of Proper Name Conceptual Knowledge

Directory of Open Access Journals (Sweden)

Sebastian J. Crutch

2011-01-01

Full Text Available We report the investigation of the organisation of proper names in two aphasic patients (NBC and FBI. The performance of both patients on spoken word to written word matching tasks was inconsistent, affected by presentation rate and semantic relatedness of the competing responses, all hallmarks of a refractory semantic access dysphasia. In a series of experiments we explored the semantic relatedness effects within their proper name vocabulary, including brand names and person names. First we demonstrated the interaction between very fine grain organisation and personal experience, with one patient with a special interest in the cinema demonstrating higher error rates when identifying the names of actors working in a similar film genre (e.g. action movies: Arnold Schwarzenegger, Bruce Willis, Sylvester Stallone, Mel Gibson than those working in different genres (e.g. Arnold Schwarzenegger, Gregory Peck, Robin Williams, Gene Kelly. Second we compared directly two potential principles of semantic organisation – taxonomic and thematic. Furthermore we considered these principles of organisation in the context of the individuals' personal knowledge base. We selected topics matching the interests and experience of each patient, namely cinema and literature (NBC and naval history (FBI. The stimulus items were arranged in taxonomic arrays (e.g. Jane Austen, Emily Bronte, Agatha Christie, thematic arrays (e.g. Jane Austen, Pride and Prejudice, Mr Darcy, and unrelated arrays (e.g. Jane Austen, Wuthering Heights, Hercule Poirot. We documented that different patterns of taxonomic and thematic organisation were constrained by whether the individual has limited knowledge, moderate knowledge or detailed knowledge of a particular vocabulary. It is suggested that moderate proper name knowledge is primarily organised by taxonomy whereas extensive experience results in a more detailed knowledge base in which theme is a powerful organising principle.

Taxonomic and thematic organisation of proper name conceptual knowledge.

Science.gov (United States)

Crutch, Sebastian J; Warrington, Elizabeth K

2011-01-01

We report the investigation of the organisation of proper names in two aphasic patients (NBC and FBI). The performance of both patients on spoken word to written word matching tasks was inconsistent, affected by presentation rate and semantic relatedness of the competing responses, all hallmarks of a refractory semantic access dysphasia. In a series of experiments we explored the semantic relatedness effects within their proper name vocabulary, including brand names and person names. First we demonstrated the interaction between very fine grain organisation and personal experience, with one patient with a special interest in the cinema demonstrating higher error rates when identifying the names of actors working in a similar film genre (e.g., action movies: Arnold Schwarzenegger, Bruce Willis, Sylvester Stallone, Mel Gibson) than those working in different genres (e.g., Arnold Schwarzenegger, Gregory Peck, Robin Williams, Gene Kelly). Second we compared directly two potential principles of semantic organisation - taxonomic and thematic. Furthermore we considered these principles of organisation in the context of the individuals' personal knowledge base. We selected topics matching the interests and experience of each patient, namely cinema and literature (NBC) and naval history (FBI). The stimulus items were arranged in taxonomic arrays (e.g., Jane Austen, Emily Bronte, Agatha Christie), thematic arrays (e.g., Jane Austen, Pride and Prejudice, Mr Darcy), and unrelated arrays (e.g., Jane Austen, Wuthering Heights, Hercule Poirot). We documented that different patterns of taxonomic and thematic organisation were constrained by whether the individual has limited knowledge, moderate knowledge or detailed knowledge of a particular vocabulary. It is suggested that moderate proper name knowledge is primarily organised by taxonomy whereas extensive experience results in a more detailed knowledge base in which theme is a powerful organising principle.

Enabling Super-Nyquist Wavefront Control on WFIRST

Science.gov (United States)

Bendek, Eduardo; Belikov, Ruslan; Sirbu, Dan; Shaklan, Stuart B.; Eldorado Riggs, A. J.

2018-01-01

A large fraction of sun-like stars is contained in Binary systems. Within 10pc there are 70 FGK stars from which, 43 belong to a multi-star system, and 28 of them have companion leak that is greater than 1e-9 contrast assuming typical Hubble-quality space optics. Currently, those binary stars are not included in the WFIRST-CGI target list, but they could be observed if high-contrast imaging around binary star systems using WFIRST is possible, increasing by 70% the number of possible FGK targets for the mission. The Multi-Star Wavefront Control (MSWC) algorithm can be used to suppress the companion star leakage. If the targets have angular separations larger than the Nyquist controllable region of the Deformable Mirror the MSWC must operate in its Super-Nyquist (SN) mode. This mode requires a target star replica within the SN region in order to provide the energy, and coherent light necessary to null speckles at SN angular separations. For the case of WFIRST, about half of the targets that can be observed using MSWC have angular separations larger than the Nyquist controllable region of the 48x48 actuator Deformable Mirror (DM) to be used. Here, we discuss multiple alternatives to generate those PSF replicas with minimal or no impact to the WFIRST Coronagraph instrument such as 1) the addition of a movable diffractive pupil mounted of the Shape Pupil wheel. 2) Design of a modified Shape Pupil design able to create a dark zone and at the same time diffract a small fraction of the starlight on the SN region. 3) Predict the minimum residual quilting on Xinetics DM that would allow observing a given target.

Optical methods for enabling focus cues in head-mounted displays for virtual and augmented reality

Science.gov (United States)

Hua, Hong

2017-05-01

Developing head-mounted displays (HMD) that offer uncompromised optical pathways to both digital and physical worlds without encumbrance and discomfort confronts many grand challenges, both from technological perspectives and human factors. Among the many challenges, minimizing visual discomfort is one of the key obstacles. One of the key contributing factors to visual discomfort is the lack of the ability to render proper focus cues in HMDs to stimulate natural eye accommodation responses, which leads to the well-known accommodation-convergence cue discrepancy problem. In this paper, I will provide a summary on the various optical methods approaches toward enabling focus cues in HMDs for both virtual reality (VR) and augmented reality (AR).

PROPER MOTIONS OF YOUNG STELLAR OUTFLOWS IN THE MID-INFRARED WITH SPITZER (IRAC). I. THE NGC 1333 REGION

International Nuclear Information System (INIS)

Raga, A. C.; Noriega-Crespo, A.; Carey, S. J.; Arce, H. G.

2013-01-01

We use two 4.5 μm Spitzer (IRAC) maps of the NGC 1333 region taken over a ∼7 yr interval to determine proper motions of its associated outflows. This is a first successful attempt at obtaining proper motions of stellars' outflow from Spitzer observations. For the outflow formed by the Herbig-Haro objects HH7, 8, and 10, we find proper motions of ∼9-13 km s –1 , which are consistent with previously determined optical proper motions of these objects. We determine proper motions for a total of eight outflows, ranging from ∼10 to 100 km s –1 . The derived proper motions show that out of these eight outflows, three have tangential velocities ≤20 km s –1 . This result shows that a large fraction of the observed outflows have low intrinsic velocities and that the low proper motions are not merely a projection effect.

Claudin5a is required for proper inflation of Kupffer's vesicle lumen and organ laterality.

Directory of Open Access Journals (Sweden)

Jeong-Gyun Kim

Full Text Available Left-right asymmetric organ development is critical to establish a proper body plan of vertebrates. In zebrafish, the Kupffer's vesicle (KV is a fluid-filled sac which controls asymmetric organ development, and a properly inflated KV lumen by means of fluid influx is a prerequisite for the asymmetric signal transmission. However, little is known about the components that support the paracellular tightness between the KV luminal epithelial cells to sustain hydrostatic pressure during KV lumen expansion. Here, we identified that the claudin5a (cldn5a is highly expressed at the apical surface of KV epithelial cells and tightly seals the KV lumen. Downregulation of cldn5a in zebrafish showed a failure in organ laterality that resulted from malformed KV. In addition, accelerated fluid influx into KV by combined treatment of forskolin and 3-isobutyl-1-methylxanthine failed to expand the partially-formed KV lumen in cldn5a morphants. However, malformed KV lumen and defective heart laterality in cldn5a morphants were significantly rescued by exogenous cldn5a mRNA, suggesting that the tightness between the luminal epithelial cells is important for KV lumen formation. Taken together, these findings suggest that cldn5a is required for KV lumen inflation and left-right asymmetric organ development.

Claudin5a is required for proper inflation of Kupffer's vesicle lumen and organ laterality.

Science.gov (United States)

Kim, Jeong-Gyun; Bae, Sung-Jin; Lee, Hye Shin; Park, Ji-Hyeon; Kim, Kyu-Won

2017-01-01

Left-right asymmetric organ development is critical to establish a proper body plan of vertebrates. In zebrafish, the Kupffer's vesicle (KV) is a fluid-filled sac which controls asymmetric organ development, and a properly inflated KV lumen by means of fluid influx is a prerequisite for the asymmetric signal transmission. However, little is known about the components that support the paracellular tightness between the KV luminal epithelial cells to sustain hydrostatic pressure during KV lumen expansion. Here, we identified that the claudin5a (cldn5a) is highly expressed at the apical surface of KV epithelial cells and tightly seals the KV lumen. Downregulation of cldn5a in zebrafish showed a failure in organ laterality that resulted from malformed KV. In addition, accelerated fluid influx into KV by combined treatment of forskolin and 3-isobutyl-1-methylxanthine failed to expand the partially-formed KV lumen in cldn5a morphants. However, malformed KV lumen and defective heart laterality in cldn5a morphants were significantly rescued by exogenous cldn5a mRNA, suggesting that the tightness between the luminal epithelial cells is important for KV lumen formation. Taken together, these findings suggest that cldn5a is required for KV lumen inflation and left-right asymmetric organ development.

Risk factors for proper oral language development in children: a systematic literature review.

Science.gov (United States)

Gurgel, Léia Gonçalves; Vidor, Deisi Cristina Gollo Marques; Joly, Maria Cristina Rodrigues Azevedo; Reppold, Caroline Tozzi

2014-01-01

To conduct a systematic review of literature production related to risk factors for proper oral language development in children. We used the terms "child language," "risk factors," and "randomized controlled trial" in MEDLINE (accessed via PubMed), Lilacs, SciELO, and The Cochrane Library from January 1980 to February 2014. Randomized controlled trials involving the study of some risk factors related to child language were included. Works with individuals who were not from the age group 0-12 years and presented no reliable definition of risk factors were excluded. The research findings were classified according to their theme and categorized methodological aspects. We observed the lack of a standardized list of risk factors for language available for health professionals. The main risk factor mentioned was family dynamics, followed by interaction with parents, immediate social environment, and encouragement given to the child in the first years of life. It was also observed that organic hazards such as brain injury, persistent otitis media, and cardiac surgery, besides the type of food and parental counseling, may be related to language disorders. More randomized controlled trials involving the evaluation of risk factors for child language and the creation of further studies involving children above 6 years of age and males are needed.

Infection control in design and construction work.

Science.gov (United States)

Collinge, William H

2015-01-01

To clarify how infection control requirements are represented, communicated, and understood in work interactions through the medical facility construction project life cycle. To assist project participants with effective infection control management by highlighting the nature of such requirements and presenting recommendations to aid practice. A 4-year study regarding client requirement representation and use on National Health Service construction projects in the United Kingdom provided empirical evidence of infection control requirement communication and understanding through design and construction work interactions. An analysis of construction project resources (e.g., infection control regulations and room data sheets) was combined with semi-structured interviews with hospital client employees and design and construction professionals to provide valuable insights into the management of infection control issues. Infection control requirements are representationally indistinct but also omnipresent through all phases of the construction project life cycle: Failure to recognize their nature, relevance, and significance can result in delays, stoppages, and redesign work. Construction project resources (e.g., regulatory guidance and room data sheets) can mask or obscure the meaning of infection control issues. A preemptive identification of issues combined with knowledge sharing activities among project stakeholders can enable infection control requirements to be properly understood and addressed. Such initiatives should also reference existing infection control regulatory guidance and advice. © The Author(s) 2015.

Nonlinear model-based control of the Czochralski process III: Proper choice of manipulated variables and controller parameter scheduling

Science.gov (United States)

Neubert, M.; Winkler, J.

2012-12-01

This contribution continues an article series [1,2] about the nonlinear model-based control of the Czochralski crystal growth process. The key idea of the presented approach is to use a sophisticated combination of nonlinear model-based and conventional (linear) PI controllers for tracking of both, crystal radius and growth rate. Using heater power and pulling speed as manipulated variables several controller structures are possible. The present part tries to systematize the properties of the materials to be grown in order to get unambiguous decision criteria for a most profitable choice of the controller structure. For this purpose a material specific constant M called interface mobility and a more process specific constant S called system response number are introduced. While the first one summarizes important material properties like thermal conductivity and latent heat the latter one characterizes the process by evaluating the average axial thermal gradients at the phase boundary and the actual growth rate at which the crystal is grown. Furthermore these characteristic numbers are useful for establishing a scheduling strategy for the PI controller parameters in order to improve the controller performance. Finally, both numbers give a better understanding of the general thermal system dynamics of the Czochralski technique.

RCT: 2.05 Contamination Control, Course #8770

Energy Technology Data Exchange (ETDEWEB)

Hillmer, Kurt T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-05-23

This report focuses on the detection and control of radioactive contamination, which are an integral part of an aggressive ALARA program and provide an indication of the effectiveness of engineering controls and proper work practices in preventing the release of radioactive material. Radioactive contamination, if undetected or not properly controlled, can be spread and contaminate areas, equipment, personnel, and the environment.

Hierarchical Control Scheme for Voltage Harmonics Compensation in an Islanded Droop-Controlled Microgrid

DEFF Research Database (Denmark)

Savaghebi, Mehdi; Guerrero, Josep M.; Jalilian, Alireza

2011-01-01

In this paper, a microgrid hierarchical control scheme is proposed which includes primary and secondary control levels. The primary level comprises distributed generators (DGs) local controllers. The local controller mainly consists of active and reactive power controllers, voltage and current...... controllers, and virtual impedance loop. A novel virtual impedance structure is proposed to achieve proper sharing of non-fundamental power among the microgrid DGs. The secondary level is designed to manage compensation of voltage harmonics at the microgrid load bus (LB) to which the sensitive loads may...... be connected. Also, restoration of LB voltage amplitude and microgrid frequency to the rated values is directed by the secondary level. These functions are achieved by sending proper control signals to the local controllers. The simulation results show the effectiveness of the proposed control scheme....

Guidelines for Properly Adjustning Pressure Feedback in Systems with Over-Centre Valves

DEFF Research Database (Denmark)

Pedersen, Henrik Clemmensen; Andersen, Torben O.; Hansen, Michael R.

2016-01-01

this problem is to use an over centre valve with a sufficiently low pilot ratio and/or include various damping orifices in the system. Both of these solutions are energy consuming and may decrease the control performance. An alternative approach is to use (electronic) pressure feedback — also referred...... to as active damping — to stabilise the system and damp pressure pulsations. This is not a new method, but the effect and adjustment of the filters is often misunderstood leading to incorrectly adjusted filters and degraded system performance. The focus of the current paper is therefore to explain and derive...... a set of guidelines for how to properly adjust a standard pressure feedback in system with an over centre valve when also considering model uncertainties, un-modelled dynamics and parameter variations. The paper takes its basis in a standard cylinder drive with an inertia load, over centre valve...

PROPER MOTIONS OF THE HH 110/270 SYSTEM

Energy Technology Data Exchange (ETDEWEB)

Kajdic, P. [Instituto de Astronomia, UNAM, Mexico D.F. (Mexico); Reipurth, B.; Walawender, J. [Institute for Astronomy, University of Hawaii at Manoa, 640 N. A' ohoku Place, Hilo, HI 96720 (United States); Raga, A. C. [Instituto de Ciencias Nucleares, UNAM, Mexico D.F. (Mexico); Bally, J., E-mail: primoz@geofisica.unam.mx, E-mail: reipurth@IfA.Hawaii.Edu, E-mail: raga@nucleares.unam.mx, E-mail: John.Bally@casa.colorado.edu, E-mail: joshw@ifa.hawaii.edu [CASA, University of Colorado, 389 UCB, Boulder, CO 80309-0389 (United States)

2012-05-15

We present a study of the HH 110/270 system based on three sets of optical images obtained with the ESO New Technology Telescope, the Subaru Telescope, and the Hubble Space Telescope (HST). The ground-based observations are made in the H{alpha} and [S II] emission lines and the HST observations are made in the H{alpha} line only. Ground-based observations reveal the existence of nine knots, which have not been previously discussed and offer some important insight into the HH 110/270 history. We perform a kinematic study of the HH 110/270 system and an analysis of its emission properties. We measure proper motions of all the knots in the system. Four of the newly identified knots belong to the HH 270 jet. Their positions indicate that the jet's axis changed its direction in the past. We speculate that similar changes may have occurred many times in the past and this could be part of the reason for the unusual structure of the HH 110 jet. The HST observations allow us to resolve individual knots into their substructures and to measure their proper motions. These measurements show that the knots are highly turbulent structures. Finally, we report the discovery of four new Herbig-Haro (HH) objects located near the HH 110/270 system.

UCAC3 Proper Motion Survey. I. Discovery of New Proper Motion Stars in UCAC3 With 0.40/yr mu 0.18/yr Between Declinations -90 deg and -47 deg

Science.gov (United States)

2010-09-01

overlooked during previous SCR and other searches. The Two-Micron All Sky Survey ( 2MASS ) was used to probe for and reduce systematic errors in UCAC CCD...of 50–200 mas, when compared to 2MASS data. For a detailed description of the derived UCAC3 proper motions see Zacharias et al. (2010). An effort was...meeting the declination and proper motion survey limits, all stars (1) must be in the 2MASS catalog with an e2mpho ( 2MASS photometry error) less than

Proper Lens Care (A Cup of Health with CDC)

Centers for Disease Control (CDC) Podcasts

2017-08-17

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. In this podcast, Dr. Jennifer Cope discusses the importance of proper lens hygiene and maintenance.  Created: 8/17/2017 by MMWR.   Date Released: 8/17/2017.

Proper Lens Care (A Minute of Health with CDC)

Centers for Disease Control (CDC) Podcasts

2017-08-17

Wearing contact lenses is a convenient way to improve vision without having to wear glasses. But unlike glasses, improper care and maintenance of lenses can result in severe eye problems, including blindness. In this podcast, Dr. Jennifer Cope discusses the importance of proper lens hygiene and maintenance.  Created: 8/17/2017 by MMWR.   Date Released: 8/17/2017.

Centrifugal and axial compressor control

CERN Document Server

McMillan, Gregory K

2009-01-01

Control engineers, mechanical engineers and mechanical technicians will learn how to select the proper control systems for axial and centrifugal compressors for proper throughput and surge control, with a particular emphasis on surge control. Readers will learn to understand the importance of transmitter speed, digital controller sample time, and control valve stroking time in helping to prevent surge. Engineers and technicians will find this book to be a highly valuable guide on compressor control schemes and the importance of mitigating costly and sometimes catastrophic surge problems. It can be used as a self-tutorial guide or in the classroom with the book's helpful end-of-chapter questions and exercises and sections for keeping notes.

Project B610 process control configuration acceptance test report

International Nuclear Information System (INIS)

Silvan, G.R.

1995-01-01

The purpose of this test is to verify the Westinghouse configuration of the MICON A/S Distributed Control System for project B610. The following will be verified: (1) proper assignment and operation of all field inputs to and outputs from the MICON Termination panels; (2) proper operation of all display data on the operators' console; (3) proper operation of all required alarms; and (4) proper operation of all required interlocks. This test only verifies the proper operation of the Westinghouse control configuration (or program). It will not be responsible for verifying proper operation of the MICON hardware or operating software. Neither does it test any of the B610 instrument. The MICON hardware and software has been tested as part of the equipment procurement. Instrumentation and wiring installed under project B620 will be tested under a separate functional test. In some cases, precise transmitter ranges, alarm setpoints, and controller tuning parameters are not available at this time. Therefore, approximate values are used during the test. This should not affect the proper operation of the configuration or the validity of this test. Final values will be assigned during operability testing

40 CFR 60.536 - Permanent label, temporary label, and owner's manual.

Science.gov (United States)

2010-07-01

... combustor, which needs periodic inspection and replacement for proper operation. Consult owner's manual for... this section. Such information shall be adequate to enable consumers to achieve optimal emissions...) Proper use of air controls, (iv) Ash removal procedures, (v) Instructions on gasket replacement, (vi) For...

Do 'enabling technologies' affect customer performance in price-responsive load programs?

International Nuclear Information System (INIS)

Goldman, Charles A.; Kintner-Meyer, Michael; Heffner, Grayson

2002-01-01

Price-responsive load (PRL) programs vary significantly in overall design, the complexity of relationships between program administrators, load aggregators, and customers, and the availability of ''enabling technologies''. Enabling technologies include such features as web-based power system and price monitoring, control and dispatch of curtailable loads, communications and information systems links to program participants, availability of interval metering data to customers in near real time, and building/facility/end-use automation and management capabilities. Two state agencies - NYSERDA in New York and the CEC in California - have been conspicuous leaders in the demonstration of demand response (DR) programs utilizing enabling technologies. In partnership with key stakeholders in these two states (e.g., grid operator, state energy agencies, and program administrators), Lawrence Berkeley National Laboratory (LBNL) and Pacific Northwest National Laboratory (PNNL) surveyed 56 customers who worked with five contractors participating in CEC or NYSERDA-sponsored DR programs. We combined market research and actual load curtailment data when available (i.e., New York) or customer load reduction targets in order to explore the relative importance of contractor's program design features, sophistication of control strategies, and reliance on enabling technologies in predicting customer's ability to deliver load reductions in DR programs targeted to large commercial/industrial customers. We found preliminary evidence that DR enabling technology has a positive effect on load curtailment potential. Many customers indicated that web-based energy information tools were useful for facilitating demand response (e.g., assessing actual performance compared to load reduction contract commitments), that multiple notification channels facilitated timely response, and that support for and use of backup generation allowed customers to achieve significant and predictable load

Multi-target electrochemical biosensing enabled by integrated CMOS electronics

International Nuclear Information System (INIS)

Rothe, J; Lewandowska, M K; Heer, F; Frey, O; Hierlemann, A

2011-01-01

An integrated electrochemical measurement system, based on CMOS technology, is presented, which allows the detection of several analytes in parallel (multi-analyte) and enables simultaneous monitoring at different locations (multi-site). The system comprises a 576-electrode CMOS sensor chip, an FPGA module for chip control and data processing, and the measurement laptop. The advantages of the highly versatile system are demonstrated by two applications. First, a label-free, hybridization-based DNA sensor is enabled by the possibility of large-scale integration in CMOS technology. Second, the detection of the neurotransmitter choline is presented by assembling the chip with biosensor microprobe arrays. The low noise level enables a limit of detection of, e.g., 0.3 µM choline. The fully integrated system is self-contained: it features cleaning, functionalization and measurement functions without the need for additional electrical equipment. With the power supplied by the laptop, the system is very suitable for on-site measurements

A randomized controlled trial of electrocoagulation-enabled biopsy versus conventional biopsy in the diagnosis of endobronchial lesions.

Science.gov (United States)

Khan, Ajmal; Aggarwal, Ashutosh N; Agarwal, Ritesh; Bal, Amanjit; Gupta, Dheeraj

2011-01-01

Although electrocoagulation at time of endobronchial biopsy can potentially reduce procedure-related bleeding during fiberoptic bronchoscopy (FOB), it can also impair quality of tissue specimen; credible data for either are lacking. To evaluate the impact of hot biopsy on the quality of tissue samples and to quantify the amount of procedure-related bleeding during endobronchial biopsy. In this single-center, prospective, single-blind, randomized controlled study we included adult patients referred for FOB and having endobronchial lesions. Patients were randomized to bronchial biopsy using an electrocoagulation-enabled biopsy forceps, with (EC+ group) or without (EC- group) application of electrocoagulation current (40 W for 10 s in a monopolar mode). Procedure-related bleeding was semi-quantified by observer description, as well as through a visual analogue scale. Overall quality of biopsy specimen and tissue damage were assessed and graded by a pulmonary pathologist blinded to FOB details. 160 patients were randomized to endobronchial biopsy with (n = 81) or without (n = 79) the application of electrocoagulation. There were no severe bleeding episodes in either group, and severity of bleeding in the EC+ and EC- groups was similar (median visual analogue scale scores of 14 and 16, respectively). Histopathological diagnosis was similar in the EC+ and EC- groups (77.8% and 82.3%, respectively). There was no significant difference in tissue quality between the two groups. Use of electrocoagulation-enabled endobronchial biopsy does not alter specimen quality and does not result in any significant reduction in procedure-related bleeding. Copyright © 2010 S. Karger AG, Basel.

Mass estimates from stellar proper motions: the mass of ω Centauri

Science.gov (United States)

D'Souza, Richard; Rix, Hans-Walter

2013-03-01

We lay out and apply methods to use proper motions of individual kinematic tracers for estimating the dynamical mass of star clusters. We first describe a simple projected mass estimator and then develop an approach that evaluates directly the likelihood of the discrete kinematic data given the model predictions. Those predictions may come from any dynamical modelling approach, and we implement an analytic King model, a spherical isotropic Jeans equation model and an axisymmetric, anisotropic Jeans equation model. This maximum likelihood modelling (MLM) provides a framework for a model-data comparison, and a resulting mass estimate, which accounts explicitly for the discrete nature of the data for individual stars, the varying error bars for proper motions of differing signal-to-noise ratio, and for data incompleteness. Both of these two methods are evaluated for their practicality and are shown to provide an unbiased and robust estimate of the cluster mass. We apply these approaches to the enigmatic globular cluster ω Centauri, combining the proper motion from van Leeuwen et al. with improved photometric cluster membership probabilities. We show that all mass estimates based on spherical isotropic models yield (4.55 ± 0.1) × 106 M⊙[D/5.5 ± 0.2 kpc]3, where our modelling allows us to show how the statistical precision of this estimate improves as more proper motion data of lower signal-to-noise ratio are included. MLM predictions, based on an anisotropic axisymmetric Jeans model, indicate for ω Cen that the inclusion of anisotropies is not important for the mass estimates, but that accounting for the flattening is: flattened models imply (4.05 ± 0.1) × 106 M⊙[D/5.5 ± 0.2 kpc]3, 10 per cent lower than when restricting the analysis to a spherical model. The best current distance estimates imply an additional uncertainty in the mass estimate of 12 per cent.

ASTERIA: Arcsecond Space Telescope Enabling Research in Astrophysics

Science.gov (United States)

Knapp, M.; Seager, S.; Smith, M. W.; Pong, C. M.

2017-12-01

ASTERIA (Arcsecond Space Telescope Enabling Research in Astrophysics) is a technology demonstration and opportunistic science mission to advance the state of the art in CubeSat capabilities for astrophysical measurements. The goal of ASTERIA is to achieve arcsecond-level line of sight pointing error and highly stable focal plane temperature control. These technologies will enable precision photometry, i.e. the careful measurement of stellar brightness over time. This in turn provides a way to study stellar activity, transiting exoplanets, and other astrophysical phenomena, both during the ASTERIA mission and in future CubeSat constellations. ASTERIA is a 6U CubeSat (roughly 10 x 20 x 30 cm, 12 kg) that will operate in low-Earth orbit. The payload consists of a lens and baffle assembly, a CMOS imager, and a two-axis piezoelectric positioning stage on which the focal plane is mounted. A set of commercial reaction wheels provides coarse attitude control. Fine pointing control is achieved by tracking a set of guide stars on the CMOS sensor and moving the piezoelectric stage to compensate for residual pointing errors. Precision thermal control is achieved by isolating the payload from the spacecraft bus, passively cooling the detector, and using trim heaters to perform small temperature corrections over the course of an observation. The ASTERIA project is a collaboration with MIT and is funded at JPL through the Phaeton Program for training early career employees. Flight hardware was delivered in June 2017, with launch expected in August 2017 and deployment targeted for October 2017.

A Case of Ruptured Aneurysm of the Proper Esophageal Artery with Symptomatic Mediastinal Hematoma

Energy Technology Data Exchange (ETDEWEB)

Liu, Jiajia; Sato, Yusuke, E-mail: yusuke@doc.med.akita-u.ac.jp [Akita University Graduate School of Medicine, Department of Thoracic Surgery (Japan); Takahashi, Satoshi [Akita University Graduate School of Medicine, Department of Radiology (Japan); Motoyama, Satoru; Yoshino, Kei; Sasaki, Tomohiko; Imai, Kazuhiro; Saito, Hajime; Minamiya, Yoshihiro [Akita University Graduate School of Medicine, Department of Thoracic Surgery (Japan)

2016-08-15

Mediastinal aneurysms are rare but potentially life-threatening. Among these, bronchial artery aneurysms are most frequently reported, whereas up to now aneurysms of the proper esophageal artery had never been reported. A 69-year-old woman was referred to our hospital for treatment of a massive mediastinal hematoma. Enhanced computed tomography and selective proper esophageal arteriography revealed a 5-mm aneurysm in the proper esophageal artery that arises from the thoracic aorta at the Th8 level and has an anastomotic branch with the bronchial artery peripherally. Transcatheter arterial embolization was successfully performed using a mixture of N-butyl cyanoacrylate and lipiodol (1:3 ratio, 0.3 ml). Post-embolization angiography showed no filling into the aneurysm. The patient recovered with no complications and was discharged on the 25th post-procedure day.

Enabling legislation and regulatory determinations for a nuclear power programme

International Nuclear Information System (INIS)

Ha-Vinh, Phuong

1975-01-01

Broad definition of the scope of enabling legislation, identification of branches of laws involved in the licensing and regulatory control, overview of some typical licensing practices and provisions, some specific legislative or regulatory requirements including financial security to over nuclear liability. (HP) [de

Enhanced methodology of focus control and monitoring on scanner tool

Science.gov (United States)

Chen, Yen-Jen; Kim, Young Ki; Hao, Xueli; Gomez, Juan-Manuel; Tian, Ye; Kamalizadeh, Ferhad; Hanson, Justin K.

2017-03-01

As the demand of the technology node shrinks from 14nm to 7nm, the reliability of tool monitoring techniques in advanced semiconductor fabs to achieve high yield and quality becomes more critical. Tool health monitoring methods involve periodic sampling of moderately processed test wafers to detect for particles, defects, and tool stability in order to ensure proper tool health. For lithography TWINSCAN scanner tools, the requirements for overlay stability and focus control are very strict. Current scanner tool health monitoring methods include running BaseLiner to ensure proper tool stability on a periodic basis. The focus measurement on YIELDSTAR by real-time or library-based reconstruction of critical dimensions (CD) and side wall angle (SWA) has been demonstrated as an accurate metrology input to the control loop. The high accuracy and repeatability of the YIELDSTAR focus measurement provides a common reference of scanner setup and user process. In order to further improve the metrology and matching performance, Diffraction Based Focus (DBF) metrology enabling accurate, fast, and non-destructive focus acquisition, has been successfully utilized for focus monitoring/control of TWINSCAN NXT immersion scanners. The optimal DBF target was determined to have minimized dose crosstalk, dynamic precision, set-get residual, and lens aberration sensitivity. By exploiting this new measurement target design, 80% improvement in tool-to-tool matching, >16% improvement in run-to-run mean focus stability, and >32% improvement in focus uniformity have been demonstrated compared to the previous BaseLiner methodology. Matching control and monitoring on multiple illumination conditions, opens an avenue to significantly reduce Focus-Exposure Matrix (FEM) wafer exposure for new product/layer best focus (BF) setup.

Deriving proper measurement uncertainty from Internal Quality Control data: An impossible mission?

Science.gov (United States)

Ceriotti, Ferruccio

2018-03-30

Measurement uncertainty (MU) is a "non-negative parameter characterizing the dispersion of the quantity values being attributed to a measurand, based on the information used". In the clinical laboratory the most convenient way to calculate MU is the "top down" approach based on the use of Internal Quality Control data. As indicated in the definition, MU depends on the information used for its calculation and so different estimates of MU can be obtained. The most problematic aspect is how to deal with bias. In fact bias is difficult to detect and quantify and it should be corrected including only the uncertainty derived from this correction. Several approaches to calculate MU starting from Internal Quality Control data are presented. The minimum requirement is to use only the intermediate precision data, provided to include 6 months of results obtained with a commutable quality control material at a concentration close to the clinical decision limit. This approach is the minimal requirement and it is convenient for all those measurands that are especially used for monitoring or where a reference measurement system does not exist and so a reference for calculating the bias is lacking. Other formulas including the uncertainty of the value of the calibrator, including the bias from a commutable certified reference material or from a material specifically prepared for trueness verification, including the bias derived from External Quality Assessment schemes or from historical mean of the laboratory are presented and commented. MU is an important parameter, but a single, agreed upon way to calculate it in a clinical laboratory is not yet available. Copyright © 2018 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

Proper body mechanics from an engineering perspective.

Science.gov (United States)

Mohr, Edward G

2010-04-01

The economic viability of the manual therapy practitioner depends on the number of massages/treatments that can be given in a day or week. Fatigue or injuries can have a major impact on the income potential and could ultimately reach the point which causes the practitioner to quit the profession, and seek other, less physically demanding, employment. Manual therapy practitioners in general, and massage therapists in particular, can utilize a large variety of body postures while giving treatment to a client. The hypothesis of this paper is that there is an optimal method for applying force to the client, which maximizes the benefit to the client, and at the same time minimizes the strain and effort required by the practitioner. Two methods were used to quantifiably determine the effect of using "poor" body mechanics (Improper method) and "best" body mechanics (Proper/correct method). The first approach uses computer modeling to compare the two methods. Both postures were modeled, such that the biomechanical effects on the practitioner's elbow, shoulder, hip, knee and ankle joints could be calculated. The force applied to the client, along with the height and angle of application of the force, was held constant for the comparison. The second approach was a field study of massage practitioners (n=18) to determine their maximal force capability, again comparing methods using "Improper and Proper body mechanics". Five application methods were tested at three different application heights, using a digital palm force gauge. Results showed that there was a definite difference between the two methods, and that the use of correct body mechanics can have a large impact on the health and well being of the massage practitioner over both the short and long term. Copyright 2009 Elsevier Ltd. All rights reserved.

PSO based PI controller design for a solar charger system.

Science.gov (United States)

Yau, Her-Terng; Lin, Chih-Jer; Liang, Qin-Cheng

2013-01-01

Due to global energy crisis and severe environmental pollution, the photovoltaic (PV) system has become one of the most important renewable energy sources. Many previous studies on solar charger integrated system only focus on load charge control or switching Maximum Power Point Tracking (MPPT) and charge control modes. This study used two-stage system, which allows the overall portable solar energy charging system to implement MPPT and optimal charge control of Li-ion battery simultaneously. First, this study designs a DC/DC boost converter of solar power generation, which uses variable step size incremental conductance method (VSINC) to enable the solar cell to track the maximum power point at any time. The voltage was exported from the DC/DC boost converter to the DC/DC buck converter, so that the voltage dropped to proper voltage for charging the battery. The charging system uses constant current/constant voltage (CC/CV) method to charge the lithium battery. In order to obtain the optimum PI charge controller parameters, this study used intelligent algorithm to determine the optimum parameters. According to the simulation and experimental results, the control parameters resulted from PSO have better performance than genetic algorithms (GAs).

PSO Based PI Controller Design for a Solar Charger System

Directory of Open Access Journals (Sweden)

Her-Terng Yau

2013-01-01

Full Text Available Due to global energy crisis and severe environmental pollution, the photovoltaic (PV system has become one of the most important renewable energy sources. Many previous studies on solar charger integrated system only focus on load charge control or switching Maximum Power Point Tracking (MPPT and charge control modes. This study used two-stage system, which allows the overall portable solar energy charging system to implement MPPT and optimal charge control of Li-ion battery simultaneously. First, this study designs a DC/DC boost converter of solar power generation, which uses variable step size incremental conductance method (VSINC to enable the solar cell to track the maximum power point at any time. The voltage was exported from the DC/DC boost converter to the DC/DC buck converter, so that the voltage dropped to proper voltage for charging the battery. The charging system uses constant current/constant voltage (CC/CV method to charge the lithium battery. In order to obtain the optimum PI charge controller parameters, this study used intelligent algorithm to determine the optimum parameters. According to the simulation and experimental results, the control parameters resulted from PSO have better performance than genetic algorithms (GAs.

Web-enabling technologies for the factory floor: a web-enabling strategy for emanufacturing

Science.gov (United States)

Velez, Ricardo; Lastra, Jose L. M.; Tuokko, Reijo O.

2001-10-01

This paper is intended to address the different technologies available for Web-enabling of the factory floor. It will give an overview of the importance of Web-enabling of the factory floor, in the application of the concepts of flexible and intelligent manufacturing, in conjunction with e-commerce. As a last section, it will try to define a Web-enabling strategy for the application in eManufacturing. This is made under the scope of the electronics manufacturing industry, so every application, technology or related matter is presented under such scope.

A Review on Natural Ventilation-enabling Façade Noise Control Devices for Congested High-Rise Cities

Directory of Open Access Journals (Sweden)

Shiu-Keung Tang

2017-02-01

Full Text Available This review summarizes the current status of the research and development of natural ventilation-enabling noise control devices for use on the façades of high-rise residential buildings in congested cities. These devices are important for a sustainable urbanized city, as they are supposed to offer good acoustical protection to citizens, allowing for an acceptable level of natural ventilation inside residential units; energy for mechanical ventilation can then be saved. From the information presented in the existing literature, it is concluded that protrusive devices, such as lintels and balconies, are not effective noise screening devices, even if they are installed with sound absorbers and/or reflectors, under the effect of city reverberation. On the contrary, plenum windows and similar structures, which are plenum structures with a staggered air inlet and outlet, are interesting alternatives that are worth rigorous considerations.

Proper Living - Exploring Domestic Ideals in Medieval Denmark

DEFF Research Database (Denmark)

Kristiansen, Mette Svart

2014-01-01

Houses frame homes, households, and daily life, and it is reasonable to suggest that ideas of domestic space in medieval society, and ideas of how to live in an orderly and acceptable manner in the eyes of one’s peers and oneself are reflected in domestic architecture, its layout, fittings......, and ornaments. This paper addresses ideas of proper living in affluent rural and urban milieus in medieval Denmark, particularly as they are expressed through houses, inventories, and murals, and it also addresses current challenges in understanding the materialized ideas based on excavations and analysis...

Geo-Enabled, Mobile Services

DEFF Research Database (Denmark)

Jensen, Christian Søndergaard

2006-01-01

We are witnessing the emergence of a global infrastructure that enables the widespread deployment of geo-enabled, mobile services in practice. At the same time, the research community has also paid increasing attention to data management aspects of mobile services. This paper offers me...

Enablement in health care context: a concept analysis.

Science.gov (United States)

Hudon, Catherine; St-Cyr Tribble, Denise; Bravo, Gina; Poitras, Marie-Eve

2011-02-01

The enablement process is defined as a professional intervention aiming to recognize, support and emphasize the patient's capacity to have control over her or his health and life. The purpose of this article was to study the enablement concept through a concept analysis in the health care context to identify: (1) its attributes and (2) its antecedents and consequents. A concept analysis was performed according to the method of Rodgers. The literature was reviewed from 1980 to June 2008, using search strategies adapted to the databases Cinahl, Medline, Embase, PsycInfo and Social Works Abstract, and hand searching. All articles contributing to a deeper understanding of the concept were included. The analysis was carried out according to a thematic analysis procedure, as described by Miles & Huberman. The search identified 1305 citations. After in-depth assessment of 148 potentially eligible citations, 61 articles were included in the review. Five articles were added with hand searching. Sixty-seven per cent of these articles were related to nursing. The attributes of the enablement concept included: contribution to the therapeutic relationship; consideration of the person as a whole; facilitation of learning; valorization of the person's strengths; implication and support to decision making; and broadening of the possibilities. These attributes could be used as a basis for other studies on enablement. Conceptual and empirical work is still needed to better position this concept among others such as patient-centred care, shared decision making and patient's participation. © 2010 Blackwell Publishing Ltd.

A turbulent jet in crossflow analysed with proper orthogonal decomposition

DEFF Research Database (Denmark)

Meyer, Knud Erik; Pedersen, Jakob Martin; Özcan, Oktay

2007-01-01

and pipe diameter was 2400 and the jet to crossflow velocity ratios were R = 3.3 and R = 1.3. The experimental data have been analysed by proper orthogonal decomposition (POD). For R = 3.3, the results in several different planes indicate that the wake vortices are the dominant dynamic flow structures...

Mirage: Mitigating Illicit Inventorying in a RFID Enabled Retail Environment

OpenAIRE

White, Jonathan; Banerjee, Nilanjan

2010-01-01

Given its low dollar and maintenance cost, RFID is poised to become the enabling technology for inventory control and supply chain management. However, as an outcome of its low cost, RFID based inventory control is susceptible to pernicious security and privacy threats. A deleterious attack on such a system is corporate espionage, where attackers through illicit inventorying infer sales and restocking trends for products. In this paper, we first present plausible aftermaths of corporate espio...

Synchronization in a Random Length Ring Network for SDN-Controlled Optical TDM Switching

DEFF Research Database (Denmark)

Kamchevska, Valerija; Cristofori, Valentina; Da Ros, Francesco

2016-01-01

. In addition, we propose a novel synchronization algorithm that enables automatic synchronization of software defined networking controlled all-optical TDM switching nodes connected in a ring network. Besides providing synchronization, the algorithm also can facilitate dynamic slot size change and failure......In this paper we focus on optical time division multiplexed (TDM) switching and its main distinguishing characteristics compared with other optical subwavelength switching technologies. We review and discuss in detail the synchronization requirements that allow for proper switching operation...... detection. We experimentally validate the algorithm behavior and achieve correct operation for three different ring lengths. Moreover, we experimentally demonstrate data plane connectivity in a ring network composed of three nodes and show successful wavelength division multiplexing space division...

Received social support and exercising: An intervention study to test the enabling hypothesis.

Science.gov (United States)

Rackow, Pamela; Scholz, Urte; Hornung, Rainer

2015-11-01

Received social support is considered important for health-enhancing exercise participation. The enabling hypothesis of social support suggests an indirect association of social support and exercising via constructs of self-regulation, such as self-efficacy. This study aimed at examining an expanded enabling hypothesis by examining effects of different kinds of social support (i.e., emotional and instrumental) on exercising not only via self-efficacy but also via self-monitoring and action planning. An 8-week online study was conducted. Participants were randomly assigned to an intervention or a control group. The intervention comprised finding and then exercising regularly with a new exercise companion. Intervention and control group effects were compared by a manifest multigroup model. Received emotional social support predicted self-efficacy, self-monitoring, and action planning in the intervention group. Moreover, received emotional social support was indirectly connected with exercise via the examined mediators. The indirect effect from received emotional social support via self-efficacy mainly contributed to the total effect. No direct or indirect effect of received instrumental social support on exercise emerged. In the control group, neither emotional nor instrumental social support was associated with any of the self-regulation constructs nor with exercise. Actively looking for a new exercise companion and exercising together seems to be beneficial for the promotion of received emotional and instrumental social support. Emotional support in turn promotes exercise by enabling better self-regulation, in particular self-efficacy. Statement of contribution What is already known on this subject? With the 'enabling hypothesis', Benight and Bandura (2004, Behav. Res. Ther., 42, 1129) claimed that social support indirectly affects behaviour via self-efficacy. Research in the domain of physical exercise has provided evidence for this enabling hypothesis on a

The Nordic Housing Enabler

DEFF Research Database (Denmark)

Helle, T.; Nygren, C.; Slaug, B.

2014-01-01

This study addresses development of a content-valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients, and their home environments. The instrument was transla......This study addresses development of a content-valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients, and their home environments. The instrument...... was translated from the original Swedish version of the Housing Enabler, and adapted according to accessibility norms and guidelines for housing design in Sweden, Denmark, Finland, and Iceland. This iterative process involved occupational therapists, architects, building engineers, and professional translators......, resulting in the Nordic Housing Enabler. For reliability testing, the sampling strategy and data collection procedures used were the same in all countries. Twenty voluntary occupational therapists, pair-wise but independently of each other, collected data from 106 cases by means of the Nordic Housing...

Brain-Machine Interface Enables Bimanual Arm Movements in Monkeys

Science.gov (United States)

Ifft, Peter J.; Shokur, Solaiman; Li, Zheng; Lebedev, Mikhail A.; Nicolelis, Miguel A. L.

2014-01-01

Brain-machine interfaces (BMIs) are artificial systems that aim to restore sensation and movement to severely paralyzed patients. However, previous BMIs enabled only single arm functionality, and control of bimanual movements was a major challenge. Here, we developed and tested a bimanual BMI that enabled rhesus monkeys to control two avatar arms simultaneously. The bimanual BMI was based on the extracellular activity of 374–497 neurons recorded from several frontal and parietal cortical areas of both cerebral hemispheres. Cortical activity was transformed into movements of the two arms with a decoding algorithm called a 5th order unscented Kalman filter (UKF). The UKF is well-suited for BMI decoding because it accounts for both characteristics of reaching movements and their representation by cortical neurons. The UKF was trained either during a manual task performed with two joysticks or by having the monkeys passively observe the movements of avatar arms. Most cortical neurons changed their modulation patterns when both arms were engaged simultaneously. Representing the two arms jointly in a single UKF decoder resulted in improved decoding performance compared with using separate decoders for each arm. As the animals’ performance in bimanual BMI control improved over time, we observed widespread plasticity in frontal and parietal cortical areas. Neuronal representation of the avatar and reach targets was enhanced with learning, whereas pairwise correlations between neurons initially increased and then decreased. These results suggest that cortical networks may assimilate the two avatar arms through BMI control. PMID:24197735

VizieR Online Data Catalog: Proper motions in M 11 (Su+ 1998)

Science.gov (United States)

Su, C.-G.; Zhao, J.-L.; Tian, K.-P.

1997-07-01

Relative proper motions of 872 stars in the open cluster M 11 region are reduced using 10 plate pairs taken over time baselines of 16~70 years with the double astrograph telescope of Shanghai Observatory. The scale is 30"/mm. The plates were measured with the PDS machines in the Purple Mountain Observatory in Nanjing and the Institute of Technology and Communication in Luoyang, China. The average proper motion accuracy is about 1.1mas/yr with 85% of the data better than 1mas/yr. Membership probabilities of 785 stars within 25' centred on M 11 are determined based on their proper motions. The method used is suggested by Su et al. (1995AcApS..15..217S) with some improvements of Zhao & He (1990A&A...237...54Z), in which the space distribution and magnitude dependencies for cluster stars are taken into account. The results are significantly good. The total integrated membership probabilities for all these stars is 547 and the number of stars with probabilities higher than 0.7 is 541. It can be found after the membership determination that there exists mass segregation in M 11. Some comparisons and discussion are also given. (1 data file).

Radiating c metric: an example of a proper Ricci Collineation

International Nuclear Information System (INIS)

Aulestia, L.; Nunez, L.; Patino, A.; Rago, H.; Herrera, L.

1984-01-01

A generalization of the charged c metric to the nonstationary case is given. The possibility of associating the energy-momentum tensor with the electromagnetic or neutrino field is discussed. It is shown that, for a specific choice of the time-dependent parameters, the metric admits at least a two-parameter group of proper Ricci collineations

Considerations concerning the ergonomics of power plant control rooms

International Nuclear Information System (INIS)

Herbst, L.; Hinz, W.

1981-01-01

Modern control rooms for the monitoring and control of large power plants have a high degree of automation. However, it is the responsibility of the control room personnel to ensure optimum process control during all operational states. The proper ergonomic design of a control room is one of the prerequisites to ensure that the operators are able to perceive the often large flow of current information and, after processing, to respond properly. (orig.) [de

Design and Control of a Haptic Enabled Robotic Manipulator

Directory of Open Access Journals (Sweden)

Muhammad Yaqoob

2015-07-01

Full Text Available Robotic surgery offers various advantages over conventional surgery that includes less bleeding, less trauma, and more precise tissue cutting. However, even surgeons who use the best commercially available surgical robotic systems complain about the absence of haptic feedback in such systems. In this paper, we present the findings of our project to overcome this shortcoming of surgical robotic systems, in which a haptic-enabled robotic system based on master and slave topology is designed and developed. To detect real-time intrusion at the slave end, haptic feedback is implemented along with a programmable system on chip, functioning as an embedded system for processing information. In order to obtain real-time haptic feedback, force and motion sensors are mounted on each joint of the master and slave units. At the master end, results are displayed through a graphical user interface, along with the physical feeling of intrusion at the slave part. Apart from the obvious applications of the current system in robotic surgery, it could also be used in designing more intuitive video games with further precise haptic feedback mechanisms. Moreover, the results presented in our work should pave the way for further scientific investigation, to provide even better haptic mechanisms.

Modelling for Control of Exhaust Gas Recirculation on Large Diesel Engines

DEFF Research Database (Denmark)

Hansen, Jakob Mahler; Zander, Claes-Göran; Pedersen, Nicolai

2013-01-01

Exhaust Gas Recirculation (EGR) reduces NOx emissions by reducing O2 concentration for the combustion and is a preferred way to obtain emission regulations that will take effect from 2016. If not properly controlled, reduction of O2 has adverse side eects and proper control requires proper dynami...... principles followed by parameter identication and compares the results of these approaches. The paper performs a validation against experimental data from a test engine and presents a linearised model for EGR control design....

Enabling System Evolution through Configuration Management on the Hardware/Software Boundary

NARCIS (Netherlands)

Krikhaar, R.L.; Mosterman, W.; Veerman, N.P.; Verhoef, C.

2009-01-01

As the use of software and electronics in modern products is omnipresent and continuously increasing, companies in the embedded systems industry face increasing complexity in controlling and enabling the evolution of their IT-intensive products. Traditionally, product configurations and their

Proper survey methods for research of aquatic plant ecology and management

Science.gov (United States)

Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

Impact of quasar proper motions on the alignment between the International Celestial Reference Frame and the Gaia reference frame

Science.gov (United States)

Liu, J.-C.; Malkin, Z.; Zhu, Z.

2018-03-01

The International Celestial Reference Frame (ICRF) is currently realized by the very long baseline interferometry (VLBI) observations of extragalactic sources with the zero proper motion assumption, while Gaia will observe proper motions of these distant and faint objects to an accuracy of tens of microarcseconds per year. This paper investigates the difference between VLBI and Gaia quasar proper motions and it aims to understand the impact of quasar proper motions on the alignment of the ICRF and Gaia reference frame. We use the latest time series data of source coordinates from the International VLBI Service analysis centres operated at Goddard Space Flight Center (GSF2017) and Paris observatory (OPA2017), as well as the Gaia auxiliary quasar solution containing 2191 high-probability optical counterparts of the ICRF2 sources. The linear proper motions in right ascension and declination of VLBI sources are derived by least-squares fits while the proper motions for Gaia sources are simulated taking into account the acceleration of the Solar system barycentre and realistic uncertainties depending on the source brightness. The individual and global features of source proper motions in GSF2017 and OPA2017 VLBI data are found to be inconsistent, which may result from differences in VLBI observations, data reduction and analysis. A comparison of the VLBI and Gaia proper motions shows that the accuracies of the components of rotation and glide between the two systems are 2-4 μas yr- 1 based on about 600 common sources. For the future alignment of the ICRF and Gaia reference frames at different wavelengths, the proper motions of quasars must necessarily be considered.

Investigation on proper materials of a liner system for trench type disposal facilities of radioactive wastes from research, industrial and medical facilities

International Nuclear Information System (INIS)

Nakata, Hisakazu; Amazawa, Hiroya; Sakai, Akihiro; Arikawa, Masanobu; Sakamoto, Yoshiaki

2011-08-01

The Low-level Radioactive Waste Disposal Project Center of Japan Atomic Energy Agency will settle on near surface disposal facilities with and without engineered barriers for radioactive wastes from research, industrial and medical facilities. Both of them are so called 'concrete pit type' and 'trench type', respectively. The technical standard of constructing and operating a disposal facility based on 'Law for the Regulations of Nuclear Source Material, Nuclear Fuel Material and Reactors' have been regulated partly by referring to that of 'Waste Management and Public Cleansing Law'. This means that the concrete pit type and the trench type disposal facility resemble an isolated type for specified industrial wastes and a non leachate controlled type final disposal site for stable industrial wastes, respectively. On the other, We plan to design a disposal facility with a liner system corresponding to a leachate controlled type final disposal site on a crucial assumption that radioactive wastes other than stable industrial wastes to be disposed into the trench type disposal facility is generated. By current nuclear related regulations in Japan, There are no technical standard of constructing the disposal facility with the liner system referring to that of 'Waste Management and Public Cleansing Law'. We investigate the function of the liner system in order to design a proper liner system for the trench type disposal facility. In this report, We investigated liner materials currently in use by actual leachate controlled type final disposal sites in Japan. Thereby important items such as tensile strength, durability from a view point of selecting proper liner materials were studied. The items were classified into three categories according to importance. We ranked proper liner materials for the trench type disposal facility by evaluating the important items per material. As a result, high density polyethylene(HDPE) of high elasticity type polymetric sheet was selected

When Things Don’t Look Right: What Appear to be Proper Motion Discrepancies in the WDS

Science.gov (United States)

Harshaw, Richard

2017-10-01

Proper motion data for double stars are included for most of the records in the Washington Double Star Catalog (WDS). In many cases, the proper motion data agree well with the observed changes in the system over time. But in other cases, the proper motion data do not align well with the observations. It is therefore incumbent on the double star researcher to treat any research based on proper motions with caution to be sure that wrong conclusions are not drawn. Possible reasons for such discrepancies are explored.

LocZ Is a New Cell Division Protein Involved in Proper Septum Placement in Streptococcus pneumoniae

Science.gov (United States)

Holečková, Nela; Molle, Virginie; Buriánková, Karolína; Benada, Oldřich; Kofroňová, Olga; Ulrych, Aleš; Branny, Pavel

2014-01-01

ABSTRACT How bacteria control proper septum placement at midcell, to guarantee the generation of identical daughter cells, is still largely unknown. Although different systems involved in the selection of the division site have been described in selected species, these do not appear to be widely conserved. Here, we report that LocZ (Spr0334), a newly identified cell division protein, is involved in proper septum placement in Streptococcus pneumoniae. We show that locZ is not essential but that its deletion results in cell division defects and shape deformation, causing cells to divide asymmetrically and generate unequally sized, occasionally anucleated, daughter cells. LocZ has a unique localization profile. It arrives early at midcell, before FtsZ and FtsA, and leaves the septum early, apparently moving along with the equatorial rings that mark the future division sites. Consistently, cells lacking LocZ also show misplacement of the Z-ring, suggesting that it could act as a positive regulator to determine septum placement. LocZ was identified as a substrate of the Ser/Thr protein kinase StkP, which regulates cell division in S. pneumoniae. Interestingly, homologues of LocZ are found only in streptococci, lactococci, and enterococci, indicating that this close phylogenetically related group of bacteria evolved a specific solution to spatially regulate cell division. PMID:25550321

The transverse index theorem for proper cocompact actions of Lie groupoids

NARCIS (Netherlands)

Pflaum, M.J.; Posthuma, H.; Tang, X.

2015-01-01

Given a proper, cocompact action of a Lie groupoid, we define a higher index pairing between invariant elliptic differential operators and smooth groupoid cohomology classes. We prove a cohomological index formula for this pairing by applying the van Est map and algebraic index theory. Finally we

Properly quantized history-dependent Parrondo games, Markov processes, and multiplexing circuits

Energy Technology Data Exchange (ETDEWEB)

Bleiler, Steven A. [Fariborz Maseeh Department of Mathematics and Statistics, Portland State University, PO Box 751, Portland, OR 97207 (United States); Khan, Faisal Shah, E-mail: faisal.khan@kustar.ac.a [Khalifa University of Science, Technology and Research, PO Box 127788, Abu Dhabi (United Arab Emirates)

2011-05-09

Highlights: History-dependent Parrondo games are viewed as Markov processes. Quantum mechanical analogues of these Markov processes are constructed. These quantum analogues restrict to the original process on measurement. Relationship between these analogues and a quantum circuits is exhibited. - Abstract: In the context of quantum information theory, 'quantization' of various mathematical and computational constructions is said to occur upon the replacement, at various points in the construction, of the classical randomization notion of probability distribution with higher order randomization notions from quantum mechanics such as quantum superposition with measurement. For this to be done 'properly', a faithful copy of the original construction is required to exist within the new quantum one, just as is required when a function is extended to a larger domain. Here procedures for extending history-dependent Parrondo games, Markov processes and multiplexing circuits to their quantum versions are analyzed from a game theoretic viewpoint, and from this viewpoint, proper quantizations developed.

Prehepatocholedochal proper hepatic artery. Rare anatomical variant. Surgical considerations. Case report.

Science.gov (United States)

Ardeleanu, V; Chicoş, S; Tutunaru, D; Georgescu, C

2014-01-01

In classical anatomic variants, the proper hepatic artery (PHA)continues the common hepatic artery (CHA) after the gastroduodenal artery (GDA) detaches itself and divides into the right hepatic artery (RHA) and left hepatic artery (LHA), the proper hepatic artery being located to the left of the hepatocholedochal duct (HCD). This paper presents an abnormal positioning of the PHA placed before the HCD with an increased diameter of about 5-7 mm, which could be confused with the HCD. We present the case of a 57 year-old woman diagnosed with acute lithiasic cholecystitis, associated with hypersplenism and hypertension. The literature mentions manifold anatomical variants of arterial liver vascularization,including PHA. For this reason, this paper presents an overview of similar cases that can be found in medical literature. The aforementioned case is a rare topographic anatomy for the PHA that can easily pass for HCD especially during celioscopy, therefore it is crucial for this to be acknowledged by all surgeons. Celsius.

Thermodynamic theory of dislocation-enabled plasticity

International Nuclear Information System (INIS)

Langer, J. S.

2017-01-01

The thermodynamic theory of dislocation-enabled plasticity is based on two unconventional hypotheses. The first of these is that a system of dislocations, driven by external forces and irreversibly exchanging heat with its environment, must be characterized by a thermodynamically defined effective temperature that is not the same as the ordinary temperature. The second hypothesis is that the overwhelmingly dominant mechanism controlling plastic deformation is thermally activated depinning of entangled pairs of dislocations. This paper consists of a systematic reformulation of this theory followed by examples of its use in analyses of experimentally observed phenomena including strain hardening, grain-size (Hall-Petch) effects, yielding transitions, and adiabatic shear banding.

The Nordic Housing Enabler

DEFF Research Database (Denmark)

Helle, Tina; Slaug, Bjørn; Brandt, Åse

2010-01-01

This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of its inter-rater reliability when used in occupational therapy rating situations, involving occupational therapists, clients and their home environments. The instrument was translated...... from the original Swedish version of the Housing Enabler, and adapted according to accessibility norms and guidelines for housing design in Sweden, Denmark, Finland and Iceland. This iterative process involved occupational therapists, architects, building engineers and professional translators......, resulting in the Nordic Housing Enabler. For reliability testing, the sampling strategy and data collection procedures used were the same in all countries. Twenty voluntary occupational therapists, pair-wise but independently from each other, collected data from 106 cases by means of the Nordic Housing...

THE COMMON AND PROPER NOUNS BETWEEN ALBANIAN AND ENGLISH

OpenAIRE

Shkelqim Millaku

2017-01-01

The noun in Albanian language classified as common and proper. The common nouns in turn divide into countable and uncountable. Collective nouns and substance nouns are subclasses of the other classes. The structure of noun formation between Albanian and English on the general aspect of morphology and syntax still didn’t study in the way of comparative, contrast and generative. Those fields are our object of study. In Albanian and English we find some concepts of studies for noun for exam...

Radar Measurements of Ocean Surface Waves using Proper Orthogonal Decomposition

Science.gov (United States)

2017-03-30

Golinval, 2002, Physical interpretation of the proper orthogonal modes using the singular value decomposition, Journal of Sound and Vibration, 249...complex and contain contributions from the environment (e.g., wind, waves, currents) as well as artifacts associated with electromagnetic (EM) (wave...Although there is no physical basis/ interpretation inherent to the method because it is purely a mathematical tool, there has been an increasing

Parallaxes and Proper Motions From the MCCormick Observatory: List 47

Science.gov (United States)

Ianna, Philip A.; Patterson, Richard J.; Swain, Melanie A.

1996-01-01

Trigonometric parallaxes and proper motions are presented for 32 late-type stars observed photographically with the Leander McCormick 67 cm refractor. Eighteen of the stars have no previously published parallaxes. Twenty one of the stars are K and M dwarfs identified by Vyssotsky and his collaborators. The list includes several x-ray luminous M dwarfs, a rapidly rotating spotted flare star, and two astrometric binaries.

uvby photometry in McCormick proper motion fields

Science.gov (United States)

Degewij, J.

1982-01-01

The Danish 50 cm telescope at the European Southern Observatory was used to obtain high-precision uvby photometry for 50 F2 to G2 stars, with V values in the 9.4-12.3 mag range, which were selected in the southern galactic polar regions of the McCormick proper motion fields and measured on six different nights. The brighter stars are found to systematically exhibit smaller m(1) indices, of about 0.02 mag, upon comparison with the earlier data of Blaauw et al (1976). Single measurements are given for 98 stars in eight McCormick fields at intermediate southern galactic latitudes.

The effect of technology-enabled active learning on undergraduate students understanding of electromagnetism

International Nuclear Information System (INIS)

Dori, Y.J.

2005-01-01

Full Text:The Technology-Enabled Active Learning Project at the Massachusetts Institute of Technology (MIT) involves media-rich software for simulation and visualization in freshman physics carried out in a specially redesigned classroom to facilitate group interaction. These technology-based learning materials are especially useful in electromagnetism to help students conceptualize phenomena and processes. This study analyzes the effects of the unique learning environment of the Technology-Enabled Active Learning Project project on students cognitive and affective outcomes. The assessment of the project included examining students conceptual understanding before and after studying electromagnetism in a media-rich environment. We also investigated the effect of this environment on students preferences regarding the various teaching methods. As part of the project, we developed pre- and post-tests consisting of conceptual questions from standardized tests, as well as questions designed to assess the effect of visualizations and experiments. The research population consisted of 811 undergraduate students. It consisted of a small- and a large-scale experimental groups and a control group. Technology-Enabled Active Learning Project students improved their conceptual understanding concepts of the subject matter to a significantly higher extent than their control group peers. A majority of the students in the small-scale experiment noted that they would recommend the Technology-Enabled Active Learning Project course to fellow students, indicating the benefits of inter activity, visualization, and hands-on experiments, which the technology helped enable. In the large-scale implementation students expressed both positive and negative attitudes in the course survey

Chemically Dissected Rotation Curves of the Galactic Bulge from Main-sequence Proper Motions

Science.gov (United States)

Clarkson, William I.; Calamida, Annalisa; Sahu, Kailash C.; Brown, Thomas M.; Gennaro, Mario; Avila, Roberto J.; Valenti, Jeff; Debattista, Victor P.; Rich, R. Michael; Minniti, Dante; Zoccali, Manuela; Aufdemberge, Emily R.

2018-05-01

We report results from an exploratory study implementing a new probe of Galactic evolution using archival Hubble Space Telescope imaging observations. Precise proper motions are combined with photometric relative metallicity and temperature indices, to produce the proper-motion rotation curves of the Galactic bulge separately for metal-poor and metal-rich main-sequence samples. This provides a “pencil-beam” complement to large-scale wide-field surveys, which to date have focused on the more traditional bright giant branch tracers. We find strong evidence that the Galactic bulge rotation curves drawn from “metal-rich” and “metal-poor” samples are indeed discrepant. The “metal-rich” sample shows greater rotation amplitude and a steeper gradient against line-of-sight distance, as well as possibly a stronger central concentration along the line of sight. This may represent a new detection of differing orbital anisotropy between metal-rich and metal-poor bulge objects. We also investigate selection effects that would be implied for the longitudinal proper-motion cut often used to isolate a “pure-bulge” sample. Extensive investigation of synthetic stellar populations suggests that instrumental and observational artifacts are unlikely to account for the observed rotation curve differences. Thus, proper-motion-based rotation curves can be used to probe chemodynamical correlations for main-sequence tracer stars, which are orders of magnitude more numerous in the Galactic bulge than the bright giant branch tracers. We discuss briefly the prospect of using this new tool to constrain detailed models of Galactic formation and evolution. Based on observations made with the NASA/ESA Hubble Space Telescope and obtained from the data archive at the Space Telescope Science Institute. STScI is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

GNSS CORS hardware and software enabling new science

Science.gov (United States)

Drummond, P.

2009-12-01

GNSS CORS networks are enabling new opportunities for science and public and private sector business. This paper will explore how the newest geodetic monitoring software and GNSS receiver hardware from Trimble Navigation Ltd are enabling new science. Technology trends and science opportunities will be explored. These trends include the installation of active GNSS control, automation of observations and processing, and the advantages of multi-observable and multi-constellation observations, all performed with the use of off the shelf products and industry standard open-source data formats. Also the possibilities with moving science from an after-the-fact postprocessed model to a real-time epoch-by-epoch solution will be explored. This presentation will also discuss the combination of existing GNSS CORS networks with project specific installations used for monitoring. Experience is showing GNSS is able to provide higher resolution data than previous methods, providing new tools for science, decision makers and financial planners.

Robust control of flexible space vehicles with minimum structural excitation: On-off pulse control of flexible space vehicles

Science.gov (United States)

Wie, Bong; Liu, Qiang

1992-01-01

Both feedback and feedforward control approaches for uncertain dynamical systems (in particular, with uncertainty in structural mode frequency) are investigated. The control objective is to achieve a fast settling time (high performance) and robustness (insensitivity) to plant uncertainty. Preshaping of an ideal, time optimal control input using a tapped-delay filter is shown to provide a fast settling time with robust performance. A robust, non-minimum-phase feedback controller is synthesized with particular emphasis on its proper implementation for a non-zero set-point control problem. It is shown that a properly designed, feedback controller performs well, as compared with a time optimal open loop controller with special preshaping for performance robustness. Also included are two separate papers by the same authors on this subject.

Analysis of risk factors from salmonella infections and determination of critical control points in poultry industry production chain

Directory of Open Access Journals (Sweden)

Velhner Maja

2005-01-01

Full Text Available This paper encompasses problems related to infection caused by Salmonella spp in poultry. The need to carry out adequate control measures and to provide safe food is emphasized. Using experiences from other countries, critical control points are presented in flocks during rearing and in hatcheries. In attempt to diagnose disease as early as possible and to advise proper therapy, the significance of serology monitoring is underlined. In order to produce safe food there is a need to control disease applying our Regulations concerning eradication of Salmonella spp in poultry flocks that is given in Official paper of Republic of Serbia No 6&88 and also to include serology monitoring in poultry flocks. Veterinary practitioners are expected to perform analysis of critical control points in poultry industry as well as to determine specificity and differences in production for single farms, which would enable more effective struggle with diseases in general.

The relationship between administrative court control and legislative control

International Nuclear Information System (INIS)

Beckmann, M.

1986-01-01

The legislator can determine the extent of control of administrative courts by reduction of substantive conditions. The author has the opinion that the judicial control cannot be stricter than the legislative control. For the range of the control of administrative courts is decisive, to what extent the legislator is forced to proper legislative settlements. In this context the author discusses the Kalkar-decision of the Federal Constitutional Court of 1978. (CW) [de

An Intelligent Propulsion Control Architecture to Enable More Autonomous Vehicle Operation

Science.gov (United States)

Litt, Jonathan S.; Sowers, T. Shane; Simon, Donald L.; Owen, A. Karl; Rinehart, Aidan W.; Chicatelli, Amy K.; Acheson, Michael J.; Hueschen, Richard M.; Spiers, Christopher W.

2018-01-01

This paper describes an intelligent propulsion control architecture that coordinates with the flight control to reduce the amount of pilot intervention required to operate the vehicle. Objectives of the architecture include the ability to: automatically recognize the aircraft operating state and flight phase; configure engine control to optimize performance with knowledge of engine condition and capability; enhance aircraft performance by coordinating propulsion control with flight control; and recognize off-nominal propulsion situations and to respond to them autonomously. The hierarchical intelligent propulsion system control can be decomposed into a propulsion system level and an individual engine level. The architecture is designed to be flexible to accommodate evolving requirements, adapt to technology improvements, and maintain safety.

Is an absolute level of cortical beta suppression required for proper movement? Magnetoencephalographic evidence from healthy aging.

Science.gov (United States)

Heinrichs-Graham, Elizabeth; Wilson, Tony W

2016-07-01

Previous research has connected a specific pattern of beta oscillatory activity to proper motor execution, but no study to date has directly examined how resting beta levels affect motor-related beta oscillatory activity in the motor cortex. Understanding this relationship is imperative to determining the basic mechanisms of motor control, as well as the impact of pathological beta oscillations on movement execution. In the current study, we used magnetoencephalography (MEG) and a complex movement paradigm to quantify resting beta activity and movement-related beta oscillations in the context of healthy aging. We chose healthy aging as a model because preliminary evidence suggests that beta activity is elevated in older adults, and thus by examining older and younger adults we were able to naturally vary resting beta levels. To this end, healthy younger and older participants were recorded during motor performance and at rest. Using beamforming, we imaged the peri-movement beta event-related desynchronization (ERD) and extracted virtual sensors from the peak voxels, which enabled absolute and relative beta power to be assessed. Interestingly, absolute beta power during the pre-movement baseline was much stronger in older relative to younger adults, and older adults also exhibited proportionally large beta desynchronization (ERD) responses during motor planning and execution compared to younger adults. Crucially, we found a significant relationship between spontaneous (resting) beta power and beta ERD magnitude in both primary motor cortices, above and beyond the effects of age. A similar link was found between beta ERD magnitude and movement duration. These findings suggest a direct linkage between beta reduction during movement and spontaneous activity in the motor cortex, such that as spontaneous beta power increases, a greater reduction in beta activity is required to execute movement. We propose that, on an individual level, the primary motor cortices have an

The c-index is not proper for the evaluation of $t$-year predicted risks.

Science.gov (United States)

Blanche, Paul; Kattan, Michael W; Gerds, Thomas A

2018-02-16

We show that the widely used concordance index for time to event outcome is not proper when interest is in predicting a $t$-year risk of an event, for example 10-year mortality. In the situation with a fixed prediction horizon, the concordance index can be higher for a misspecified model than for a correctly specified model. Impropriety happens because the concordance index assesses the order of the event times and not the order of the event status at the prediction horizon. The time-dependent area under the receiver operating characteristic curve does not have this problem and is proper in this context.

Towards the Proper Integration of Extra-Functional Requirements

Directory of Open Access Journals (Sweden)

Elke Hochmuller

1999-05-01

Full Text Available In spite of the many achievements in software engineering, proper treatment of extra-functional requirements (also known as non-functional requirements within the software development process is still a challenge to our discipline. The application of functionality-biased software development methodologies can lead to major contradictions in the joint modelling of functional and extra-functional requirements. Based on a thorough discussion on the nature of extra-functional requirements as well as on open issues in coping with them, this paper emphasizes the role of extra-functional requirements in the software development process. Particularly, a framework supporting the explicit integration of extra functional requirements into a conventional phase-driven process model is proposed and outlined.

LITERATURE REVIEWING WITH RESEARCH TOOLS, Part 2: Finding proper articles

OpenAIRE

Ebrahim, Nader Ale

2017-01-01

“Research Tools” enable researchers to collect, organize, analyze, visualize and publicized research outputs. Dr. Nader has collected over 700 tools that enable students to follow the correct path in research and to ultimately produce high-quality research outputs with more accuracy and efficiency. It is assembled as an interactive Web-based mind map, titled “Research Tools”, which is updated periodically. “Research Tools” consists of a hierarchical set of nodes. It has four main nodes: (1)...

Means and ends of control

DEFF Research Database (Denmark)

Lind, Morten

2004-01-01

assumptions. Means-end analysis also lacks a proper definition of the control concept. It is proposed that control is defined as a binary relation that assign functional roles to subsystems. This control concept leads to distinct but entangled process and control hierarchies. It is argued that the problems...

Reduced verbal fluency for proper names in nondemented patients with Parkinson's disease: a quantitative and qualitative analysis.

Science.gov (United States)

Fine, Eric M; Delis, Dean C; Paul, Brianna M; Filoteo, J Vincent

2011-02-01

There has been an increasing interest within neuropsychology in comparing verbal fluency for different grammatical classes (e.g., verb generation vs. noun generation) in neurological populations, including Parkinson's disease (PD). However, to our knowledge, few studies have compared verbal fluency for common nouns and proper names in PD. Common nouns and proper names differ in terms of their semantic characteristics, as categories of common nouns are organized hierarchically based on semantics, while categories of proper nouns lack a well-defined semantic organization. In addition, there is accumulating evidence that the retrieval of these distinct grammatical classes are subserved by somewhat distinct neural systems. Given that verbal fluency deficits are among the first impairments to emerge in PD, and that such deficits are predictors of future cognitive decline, it is important to examine all aspects of verbal fluency in this population. For the current study, we compared the performance of a group of 32 nondemented PD patients with 32 healthy participants (HP) on verbal fluency tasks for common nouns (animals) and proper names (boys' first names). A significant interaction between verbal fluency task and diagnostic status emerged, as the PD group performed significantly worse on only the proper name fluency task. This finding may reflect the absence of well-defined semantic organization that structures the verbal search for first names, thus placing a greater onus on strategic or "executive" verbal retrieval processes.

Characterization of Industrial Coolant Fluids and Continuous Ageing Monitoring by Wireless Node—Enabled Fiber Optic Sensors

Directory of Open Access Journals (Sweden)

Alexandros El Sachat

2017-03-01

Full Text Available Environmentally robust chemical sensors for monitoring industrial processes or infrastructures are lately becoming important devices in industry. Low complexity and wireless enabled characteristics can offer the required flexibility for sensor deployment in adaptable sensing networks for continuous monitoring and management of industrial assets. Here are presented the design, development and operation of a class of low cost photonic sensors for monitoring the ageing process and the operational characteristics of coolant fluids used in an industrial heavy machinery infrastructure. The chemical, physical and spectroscopic characteristics of specific industrial-grade coolant fluids were analyzed along their entire life cycle range, and proper parameters for their efficient monitoring were identified. Based on multimode polymer or silica optical fibers, wide range (3–11 pH sensors were developed by employing sol-gel derived pH sensitive coatings. The performances of the developed sensors were characterized and compared, towards their coolants’ ageing monitoring capability, proving their efficiency in such a demanding application scenario and harsh industrial environment. The operating characteristics of this type of sensors allowed their integration in an autonomous wireless sensing node, thus enabling the future use of the demonstrated platform in wireless sensor networks for a variety of industrial and environmental monitoring applications.

Characterization of Industrial Coolant Fluids and Continuous Ageing Monitoring by Wireless Node-Enabled Fiber Optic Sensors.

Science.gov (United States)

Sachat, Alexandros El; Meristoudi, Anastasia; Markos, Christos; Sakellariou, Andreas; Papadopoulos, Aggelos; Katsikas, Serafim; Riziotis, Christos

2017-03-11

Environmentally robust chemical sensors for monitoring industrial processes or infrastructures are lately becoming important devices in industry. Low complexity and wireless enabled characteristics can offer the required flexibility for sensor deployment in adaptable sensing networks for continuous monitoring and management of industrial assets. Here are presented the design, development and operation of a class of low cost photonic sensors for monitoring the ageing process and the operational characteristics of coolant fluids used in an industrial heavy machinery infrastructure. The chemical, physical and spectroscopic characteristics of specific industrial-grade coolant fluids were analyzed along their entire life cycle range, and proper parameters for their efficient monitoring were identified. Based on multimode polymer or silica optical fibers, wide range (3-11) pH sensors were developed by employing sol-gel derived pH sensitive coatings. The performances of the developed sensors were characterized and compared, towards their coolants' ageing monitoring capability, proving their efficiency in such a demanding application scenario and harsh industrial environment. The operating characteristics of this type of sensors allowed their integration in an autonomous wireless sensing node, thus enabling the future use of the demonstrated platform in wireless sensor networks for a variety of industrial and environmental monitoring applications.

Characterization of Industrial Coolant Fluids and Continuous Ageing Monitoring by Wireless Node—Enabled Fiber Optic Sensors

Science.gov (United States)

El Sachat, Alexandros; Meristoudi, Anastasia; Markos, Christos; Sakellariou, Andreas; Papadopoulos, Aggelos; Katsikas, Serafim; Riziotis, Christos

2017-01-01

Environmentally robust chemical sensors for monitoring industrial processes or infrastructures are lately becoming important devices in industry. Low complexity and wireless enabled characteristics can offer the required flexibility for sensor deployment in adaptable sensing networks for continuous monitoring and management of industrial assets. Here are presented the design, development and operation of a class of low cost photonic sensors for monitoring the ageing process and the operational characteristics of coolant fluids used in an industrial heavy machinery infrastructure. The chemical, physical and spectroscopic characteristics of specific industrial-grade coolant fluids were analyzed along their entire life cycle range, and proper parameters for their efficient monitoring were identified. Based on multimode polymer or silica optical fibers, wide range (3–11) pH sensors were developed by employing sol-gel derived pH sensitive coatings. The performances of the developed sensors were characterized and compared, towards their coolants’ ageing monitoring capability, proving their efficiency in such a demanding application scenario and harsh industrial environment. The operating characteristics of this type of sensors allowed their integration in an autonomous wireless sensing node, thus enabling the future use of the demonstrated platform in wireless sensor networks for a variety of industrial and environmental monitoring applications. PMID:28287488

THE PROPER MOTIONS OF THE DOUBLE RADIO SOURCE n IN THE ORION BN/KL REGION

International Nuclear Information System (INIS)

Rodríguez, Luis F.; Loinard, Laurent; Zapata, Luis; Lizano, Susana; Dzib, Sergio A.; Menten, Karl M.; Gómez, Laura

2017-01-01

We have extended the time baseline for observations of the proper motions of radio sources in the Orion BN/KL region from 14.7 to 22.5 years. We present improved determinations for the sources BN and I. In addition, we address the proper motions of the double radio source n, that have been questioned in the literature. We confirm that all three sources are moving away at transverse velocities of tens of kilometers per second from a region in-between them, where they were located about 500 years ago. Source n exhibits a new component that we interpret as due to a one-sided ejection of free–free emitting plasma that took place after 2006.36. We used the highly accurate relative proper motions between sources BN and I to determine that their closest separation took place in the year 1475 ± 6, when they were within ∼100 au or less from each other in the plane of the sky.

THE PROPER MOTIONS OF THE DOUBLE RADIO SOURCE n IN THE ORION BN/KL REGION

Energy Technology Data Exchange (ETDEWEB)

Rodríguez, Luis F.; Loinard, Laurent; Zapata, Luis; Lizano, Susana [Instituto de Radioastronomía y Astrofísica, UNAM, Apdo. Postal 3-72 (Xangari), 58089 Morelia, Michoacán, México (Mexico); Dzib, Sergio A.; Menten, Karl M. [Max Planck Institut für Radioastronomie, Auf dem Hügel 69, D-53121 Bonn (Germany); Gómez, Laura, E-mail: l.rodriguez@crya.unam.mx [Joint ALMA Observatory, Alonso de Córdoba 3107, Vitacura, Santiago (Chile)

2017-01-10

We have extended the time baseline for observations of the proper motions of radio sources in the Orion BN/KL region from 14.7 to 22.5 years. We present improved determinations for the sources BN and I. In addition, we address the proper motions of the double radio source n, that have been questioned in the literature. We confirm that all three sources are moving away at transverse velocities of tens of kilometers per second from a region in-between them, where they were located about 500 years ago. Source n exhibits a new component that we interpret as due to a one-sided ejection of free–free emitting plasma that took place after 2006.36. We used the highly accurate relative proper motions between sources BN and I to determine that their closest separation took place in the year 1475 ± 6, when they were within ∼100 au or less from each other in the plane of the sky.

The RNA-binding protein, ZC3H14, is required for proper poly(A) tail length control, expression of synaptic proteins, and brain function in mice.

Science.gov (United States)

Rha, Jennifer; Jones, Stephanie K; Fidler, Jonathan; Banerjee, Ayan; Leung, Sara W; Morris, Kevin J; Wong, Jennifer C; Inglis, George Andrew S; Shapiro, Lindsey; Deng, Qiudong; Cutler, Alicia A; Hanif, Adam M; Pardue, Machelle T; Schaffer, Ashleigh; Seyfried, Nicholas T; Moberg, Kenneth H; Bassell, Gary J; Escayg, Andrew; García, Paul S; Corbett, Anita H

2017-10-01

A number of mutations in genes that encode ubiquitously expressed RNA-binding proteins cause tissue specific disease. Many of these diseases are neurological in nature revealing critical roles for this class of proteins in the brain. We recently identified mutations in a gene that encodes a ubiquitously expressed polyadenosine RNA-binding protein, ZC3H14 (Zinc finger CysCysCysHis domain-containing protein 14), that cause a nonsyndromic, autosomal recessive form of intellectual disability. This finding reveals the molecular basis for disease and provides evidence that ZC3H14 is essential for proper brain function. To investigate the role of ZC3H14 in the mammalian brain, we generated a mouse in which the first common exon of the ZC3H14 gene, exon 13 is removed (Zc3h14Δex13/Δex13) leading to a truncated ZC3H14 protein. We report here that, as in the patients, Zc3h14 is not essential in mice. Utilizing these Zc3h14Δex13/Δex13mice, we provide the first in vivo functional characterization of ZC3H14 as a regulator of RNA poly(A) tail length. The Zc3h14Δex13/Δex13 mice show enlarged lateral ventricles in the brain as well as impaired working memory. Proteomic analysis comparing the hippocampi of Zc3h14+/+ and Zc3h14Δex13/Δex13 mice reveals dysregulation of several pathways that are important for proper brain function and thus sheds light onto which pathways are most affected by the loss of ZC3H14. Among the proteins increased in the hippocampi of Zc3h14Δex13/Δex13 mice compared to control are key synaptic proteins including CaMK2a. This newly generated mouse serves as a tool to study the function of ZC3H14 in vivo. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Nordic Housing Enabler

DEFF Research Database (Denmark)

Helle, Tina; Brandt, Åse

Development and reliability testing of the Nordic Housing Enabler – an instrument for accessibility assessment of the physical housing. Tina Helle & Åse Brandt University of Lund, Health Sciences, Faculty of Medicine (SE) and University College Northern Jutland, Occupational Therapy department (DK......). Danish Centre for Assistive Technology. Abstract. For decades, accessibility to the physical housing environment for people with functional limitations has been of interest politically, professionally and for the users. Guidelines and norms on accessible housing design have gradually been developed......, however, the built environment shows serious deficits when it comes to accessibility. This study addresses development of a content valid cross-Nordic version of the Housing Enabler and investigation of inter-rater reliability, when used in occupational therapy practice. The instrument was translated from...

Animals′ Role in Proper Behaviour: Cheŵa Women′s Instructions in South-Central Africa

Directory of Open Access Journals (Sweden)

Leslie F Zubieta

2016-01-01

Full Text Available The most common role of animals in the Cheŵa culture of south-central Africa is twofold: they are regarded as an important source of food, and they also provide raw materials for the creation of traditional medicines. Animals, however, also have a nuanced symbolic role that impacts the way people behave with each other by embodying cultural protocols of proper — and not so proper — behaviour. They appear repeatedly in storytelling and proverbs to reference qualities that people need to avoid or pursue and learn from the moral of the story in which animals interplay with each other, just as humans do. For example, someone who wants to prevent the consequences of greed is often advised to heed hyena stories and proverbs. My contribution elaborates on Brian Morris's instrumental work in south-central Africa, which has permitted us to elucidate the symbolism of certain animals and the perception of landscape for Indigenous populations in this region. I discuss some of the ways in which animals have been employed to teach and learn proper behaviour in a particular sacred ceremony of the Cheŵa people which takes place in celebration of womanhood: Chinamwali.

FIRST RESULTS FROM Pan-STARRS1: FAINT, HIGH PROPER MOTION WHITE DWARFS IN THE MEDIUM-DEEP FIELDS

Energy Technology Data Exchange (ETDEWEB)

Tonry, J. L.; Flewelling, H. A.; Deacon, N. R.; Burgett, W. S.; Chambers, K. C.; Kaiser, N.; Kudritzki, R.-P.; Hodapp, K. W.; Magnier, E. A.; Morgan, J. S.; Wainscoat, R. J. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States); Stubbs, C. W.; Kilic, M.; Chornock, R.; Berger, E. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Price, P. A. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States)

2012-01-20

The Pan-STARRS1 survey has obtained multi-epoch imaging in five bands (Pan-STARRS1 g{sub P1}, r{sub P1}, i{sub P1}, z{sub P1}, and y{sub P1}) on 12 'Medium-Deep fields', each of which spans a 3.{sup 0}3 circle. For the period between 2009 April and 2011 April these fields were observed 50-200 times. Using a reduced proper motion diagram, we have extracted a list of 47 white dwarf (WD) candidates whose Pan-STARRS1 astrometry indicates a non-zero proper motion at the 6{sigma} level, with a typical 1{sigma} proper motion uncertainty of 10 mas yr{sup -1}. We also used astrometry from the Sloan Digital Sky Survey (when available) and USNO-B to assess our proper motion fits. None of the WD candidates exhibits evidence of statistically significant parallaxes, with a typical 1{sigma} uncertainty of 8 mas. Twelve of these candidates are known WDs, including the high proper motion (1.''7 yr{sup -1}) WD LHS 291. We confirm seven more objects as WDs through optical spectroscopy. Based on the Pan-STARRS1 colors, ten of the stars are likely to be cool WDs with 4170 K proper motion WDs that are part of the old thick disk and halo.

Editorial: The proper place for knowledge

Directory of Open Access Journals (Sweden)

Yngve Nordkvelle

2009-11-01

Full Text Available Knowledge is an interesting word, which never goes out of fashion. In the political context, knowledge is something everyone hails and cherishes. An example is that the Socialist Government in Norway renamed its "Ministry of Education and Research" to the "Ministry of Knowledge". It would probably be politically wrong to defy the word "knowledge". The word "knowledge" stirs, however, different sentiments in people. In modern education, the word signifies something notable, discernable, visual or at least possible to distinguish from what it is not. In learning in higher education, knowledge is most often considered as the raw material for learning, with the little extra that distinguishes it from "information". Knowledge is information with a direction, a purpose and meaning, but without the implied cultivation of a teaching and learning process. Given knowledge is used for educational purposes, the processing of knowledge from its basic concepts to embodied and reflected knowledge, properly understood and reconceptualised by the learner, transforms not only the learner, but also the knowledge. In a peripatetic tradition, one likes to think of knowledge as foundation elements for constructions of ethical wisdom as its highest reflective level. Probably we will never see a "Ministry of Wisdom" established, because what is "wisdom" is probably so much more politically charged than "Knowledge". One can only wonder why anyone would degrade a ministry for education to something less. In Europe a rewriting of university curricula is underway all over the continent, because "knowledge" is a key concept in the writing of "learning outcomes". It appears every college is absorbed in sorting out what knowledge is and how knowledge can be classified in categories and levels, and then composed to readable descriptions of syllabi, course descriptions and schemes. Let us hope they are more able than what has been the case. Professor Ronald Barnett of the

Rational control of technical and economic characteristics in TPP burning lignites ('Maritsa East 2' TPP's experience - Bulgaria)

International Nuclear Information System (INIS)

Raltceva, Mariana; Evtimova, Nadia

1997-01-01

'Maritsa East 2' TPP is one of the three power plants, situated in the area of the biggest coal field in Bulgaria. In the beginning of 1996 the thermal power plant had installed capacity 1450 MW. The effective and rational control of the production process is predetermined to a considerable extent by the level of the introduced automation. That is why since the end of 1989 an information and control microprocessor system MIK-2000 has been developed and next MIK-4000. The installed microprocessor systems have functional structure comprising the technological processes of the units and the whole plant. They include the operation stations of the units and the working places of the plant management, the production and technology department, the dispatch information unit and the main departments. The information and control microprocessor system (ICMS) performs operating, information and computing purposes. Use of automated systems by the plant personnel for information and control of technological, technical and economic parameters helps better operation control and enables formation of proper corrections in equipment operation mode

Prototyping qualitative controllers for fuzzy-logic controller design

International Nuclear Information System (INIS)

Bakhtiari, S.; Jabedar-Maralani, P.

1999-05-01

Qualitative controls can be designed for linear and nonlinear models with the same computational complexity. At the same time they show the general form of the proper control. These properties can help ease the design process for quantitative controls. In this paper qualitative controls are used as prototypes for the design of linear or nonlinear, and in particular Sugeno-type fuzzy, controls. The LMS identification method is used to approximate the qualitative control with the nearest fuzzy control. The method is applied to the problem of position control in a permanent magnet synchronous motor; moreover, the performance and the robustness of the two controllers are compared

The importance of proper crystal-chemical and geometrical reasoning demonstrated using layered single and double hydroxides

Science.gov (United States)

Richardson, Ian G.

2013-01-01

Atomistic modelling techniques and Rietveld refinement of X-ray powder diffraction data are widely used but often result in crystal structures that are not realistic, presumably because the authors neglect to check the crystal-chemical plausibility of their structure. The purpose of this paper is to reinforce the importance and utility of proper crystal-chemical and geometrical reasoning in structural studies. It is achieved by using such reasoning to generate new yet fundamental information about layered double hydroxides (LDH), a large, much-studied family of compounds. LDH phases are derived from layered single hydroxides by the substitution of a fraction (x) of the divalent cations by trivalent. Equations are derived that enable calculation of x from the a parameter of the unit cell and vice versa, which can be expected to be of widespread utility as a sanity test for extant and future structure determinations and computer simulation studies. The phase at x = 0 is shown to be an α form of divalent metal hydroxide rather than the β polymorph. Crystal-chemically sensible model structures are provided for β-Zn(OH)2 and Ni- and Mg-based carbonate LDH phases that have any trivalent cation and any value of x, including x = 0 [i.e. for α-M(OH)2·mH2O phases]. PMID:23719702

Integrating adjustable autonomy in an intelligent control framework

Science.gov (United States)

DeKoven, Elyon A. M.; Wood, Scott D.

2005-10-01

Currently, multiple humans are needed to operate a single uninhabited aerial vehicle (UAV). In the near future, combat techniques will involve single operators controlling multiple uninhabited ground and air vehicles. This situation creates both technological hurdles as well as interaction design challenges that must be addressed to support future fighters. In particular, the system will need to negotiate with the operator about proper task delegation, keeping the operator appropriately apprised of autonomous actions. This in turn implies that the system must know what the user is doing, what needs to be done in the present situation, and the comparative strengths for of the human and the system in each task. Towards building such systems, we are working on an Intelligent Control Framework (ICF) that provides a layer of intelligence to support future warfighters in complex task environments. The present paper presents the Adjustable Autonomy Module (AAM) in ICF. The AAM encapsulates some capabilities for user plan recognition, situation reasoning, and authority delegation control. The AAM has the knowledge necessary to support operator-system dialogue about autonomy changes, and it also provides the system with the ability to act on this knowledge. Combined with careful interaction design, planning and plan-execution capabilities, the AAM enables future design and development of effective human-robot teams.

A Study on Determination of Proper Pressurizer Level for Kori Unit 1

Energy Technology Data Exchange (ETDEWEB)

Lee, Chang Sup; Song, Dong Soo [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

1996-12-31

1. Determination of Proper Pressurizer Level. To determine operation level of pressurizer, LOFTRAN code is used with conservative model and assumption. 2. Performance Analysis. To simulate the plant, RETRAN computer code is used with realistic model and assumptions. The control and protection systems are fully credited. The turbine trip event is simulated at the condition of 47.62% of pressurizer level at full power. After that the same event as that with 55% of pressurizer level is simulated. And the FSAR requirements of pressurizer are verified with the new level setpoints. 3. Safety Analysis. As safety analyses, Loss of Normal Feedwater/Station Blackout which is significantly affected by the initial pressurizer water level is performed. Turbine Trip accident is also analyzed to verify if the peak primary side pressure is within the limit. LOFTRAN code is used with conservative mode and assumption. 3. Steam Generator Replacement. Relating to the steam generator replacement planed in 1998, safety analysis in terms of pressurizer level setpoint change. 4. Limit Condition for Operation. The LCO of pressurizer level is changed from 60% to 67.4% which is included pressurizer level uncertainty. (author). 13 refs., figs., tabs.

40 CFR 51.359 - Quality control.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 2 2010-07-01 2010-07-01 false Quality control. 51.359 Section 51.359....359 Quality control. Quality control measures shall insure that emission testing equipment is calibrated and maintained properly, and that inspection, calibration records, and control charts are...

Process evaluation of the Enabling Mothers toPrevent Pediatric Obesity Through Web-Based Learning and Reciprocal Determinism (EMPOWER) randomized control trial.

Science.gov (United States)

Knowlden, Adam P; Sharma, Manoj

2014-09-01

Family-and-home-based interventions are an important vehicle for preventing childhood obesity. Systematic process evaluations have not been routinely conducted in assessment of these interventions. The purpose of this study was to plan and conduct a process evaluation of the Enabling Mothers to Prevent Pediatric Obesity Through Web-Based Learning and Reciprocal Determinism (EMPOWER) randomized control trial. The trial was composed of two web-based, mother-centered interventions for prevention of obesity in children between 4 and 6 years of age. Process evaluation used the components of program fidelity, dose delivered, dose received, context, reach, and recruitment. Categorical process evaluation data (program fidelity, dose delivered, dose exposure, and context) were assessed using Program Implementation Index (PII) values. Continuous process evaluation variables (dose satisfaction and recruitment) were assessed using ANOVA tests to evaluate mean differences between groups (experimental and control) and sessions (sessions 1 through 5). Process evaluation results found that both groups (experimental and control) were equivalent, and interventions were administered as planned. Analysis of web-based intervention process objectives requires tailoring of process evaluation models for online delivery. Dissemination of process evaluation results can advance best practices for implementing effective online health promotion programs. © 2014 Society for Public Health Education.

Pilot project as enabler?

DEFF Research Database (Denmark)

Neisig, Margit; Glimø, Helle; Holm, Catrine Granzow

This article deals with a systemic perspective on transition. The field of study addressed is a pilot project as enabler of transition in a highly complex polycentric context. From a Luhmannian systemic approach, a framework is created to understand and address barriers of change occurred using...... pilot projects as enabler of transition. Aspects of how to create trust and deal with distrust during a transition are addressed. The transition in focus is the concept of New Public Management and how it is applied in the management of the Employment Service in Denmark. The transition regards...

Enabling CoO improvement thru green initiatives

Science.gov (United States)

Gross, Eric; Padmabandu, G. G.; Ujazdowski, Richard; Haran, Don; Lake, Matt; Mason, Eric; Gillespie, Walter

2015-03-01

Chipmakers continued pressure to drive down costs while increasing utilization requires development in all areas. Cymer's commitment to meeting customer's needs includes developing solutions that enable higher productivity as well as lowering cost of lightsource operation. Improvements in system power efficiency and predictability were deployed to chipmakers' in 2014 with release of our latest Master Oscillating gas chamber. In addition, Cymer has committed to reduced gas usage, completing development in methods to reduce Helium gas usage while maintaining superior bandwidth and wavelength stability. The latest developments in lowering cost of operations are paired with our advanced ETC controller in Cymer's XLR 700ix product.

Web-Altairis: An Internet-Enabled Ground System

Science.gov (United States)

Miller, Phil; Coleman, Jason; Gemoets, Darren; Hughes, Kevin

2000-01-01

This paper describes Web-Altairis, an Internet-enabled ground system software package funded by the Advanced Automation and Architectures Branch (Code 588) of NASA's Goddard Space Flight Center. Web-Altairis supports the trend towards "lights out" ground systems, where the control center is unattended and problems are resolved by remote operators. This client/server software runs on most popular platforms and provides for remote data visualization using the rich functionality of the VisAGE toolkit. Web-Altairis also supports satellite commanding over the Internet. This paper describes the structure of Web-Altairis and VisAGE, the underlying technologies, the provisions for security, and our experiences in developing and testing the software.

ORTHOGONAL REPRESENTATION OF THE PROPER TRANSFORMATION OF A PERSYMMETRIC MATRIX BASED ON ROTATION OPERATORS

Directory of Open Access Journals (Sweden)

V. M. Demko

2018-01-01

Full Text Available The mathematical substantiation of the algorithm for synthesis of the proper transformation and finding the eigenvalue formulae of a persymmetric matrix of dimension N = 2 k ( k =1, 4 based on orthogonal rotation operators is given. The proposed algorithm made it possible to improve the author's approach to calculating eigenvalues based on numerical examples for the maximal dimension of matrices 64×64, resulting the possibility to obtain analytical relations for calculating the eigenvalues of the persymmetric matrix. It is shown that the proper transformation has a factorized structure in the form of a product of rotation operators, each of which is a direct sum of elementary Givens and Jacobian rotation matrices. 

Enabling and Barriers of Implantable Contraceptive Use at Health Centre I North Denpasar

Directory of Open Access Journals (Sweden)

Nida Gustikawati

2015-04-01

Full Text Available Background and purpose: The objective of this study was to explore the supporting and the inhibiting factors influencing the use of implant contraceptive use by women of childbearing age. Methods: The study was qualitative using a phenomenological approach. Data collection involved a purposively selected sample, conducting two FGD (10 implant users and 10 non-users and 11 in-depth interviews among private midwives, government midwives, husbands, in-laws, and family planning staff. Results: FGD found that perceptions and attitudes towards implants of those already using the contraceptive were positive, while the perceptions and attitudes of non-users were less so. Some respondents intimated that they experienced side effects though these were not a deterring factor in usage. Enabling factors for the use of implant contraceptives were the availability and accessibility to the healthcare facilities and the support of their husbands. Access to facilities and infrastructure were not inhibiting factors either for the users or the non-users. Findings from in-depth interviews indicated that inhibiting factors included were the desire to have more children and the lack of promotion of the implant contraceptives. Healthcare provider informants stated that the lack of training was an inhibiting factor. Conclusion: Enabling factors for the use of implant contraceptives were the availability and accessibility to the healthcare facilities and the support of their husbands. Inhibiting factors were the desire to have more children, the lack of proper training for the health workers, as well as the lack of promotion of the implant contraceptive in the community.

IT-enabled dynamic capability on performance: An empirical study of BSC model

Directory of Open Access Journals (Sweden)

Adilson Carlos Yoshikuni

2017-05-01

Full Text Available ew studies have investigated the influence of “information capital,” through IT-enabled dynamic capability, on corporate performance, particularly in economic turbulence. Our study investigates the causal relationship between performance perspectives of the balanced scorecard using partial least squares path modeling. Using data on 845 Brazilian companies, we conduct a quantitative empirical study of firms during an economic crisis and observe the following interesting results. Operational and analytical IT-enabled dynamic capability had positive effects on business process improvement and corporate performance. Results pertaining to mediation (endogenous variables and moderation (control variables clarify IT’s role in and benefits for corporate performance.

Deriving proper uniform priors for regression coefficients, Parts I, II, and III

NARCIS (Netherlands)

van Erp, H.R.N.; Linger, R.O.; van Gelder, P.H.A.J.M.

2017-01-01

It is a relatively well-known fact that in problems of Bayesian model selection, improper priors should, in general, be avoided. In this paper we will derive and discuss a collection of four proper uniform priors which lie on an ascending scale of informativeness. It will turn out that these

Vantage Theory and the Use of English Demonstrative Determiners with Proper Nouns

Science.gov (United States)

Riddle, Elizabeth M.

2010-01-01

This article discusses some apparently paradoxical behavior of the English demonstratives "this/these" and "that/those" as determiners of proper nouns and as metaphorical signals of epistemic and affective stance within the proximal-distal opposition. It is argued that the apparent paradoxes are actually cases of shifting perspectives or points of…

MERLIN observations of water maser proper motions in VY Canis Majoris

Science.gov (United States)

Richards, A. M. S.; Yates, J. A.; Cohen, R. J.

1998-09-01

MERLIN observations of the 22-GHz water masers in the circumstellar envelope of the supergiant VY CMa show an ellipsoidal distribution with a maximum extent of 700 mas east-west and 400 mas north-south. Comparison with observations made nine years earlier shows that the majority of maser features have survived and show proper motions throughout the region. The mean change in position is 28 mas and the proper motions are generally directed away from the assumed stellar position, and tend to be larger for features at greater projected distances. If the H_2O maser region is modelled as a partially filled thick spherical shell, and VY CMa is at a distance of 1.5 kpc, then the proper motion velocities in the direction of expansion are between 8kms^-1 at a distance of 75 mas from the assumed stellar position and 32kms^-1 at 360 mas. These velocities are consistent with the H_2O maser spectral line velocities which correspond to a maximum expansion velocity of 36kms^-1 at 400 mas from the assumed stellar position. These observations are consistent with radiation pressure on dust providing the force to accelerate the stellar wind as it passes through the H_2O maser shell. The H_2O maser region is elongated in the same direction as the dusty nebula around VY CMa. The water masers illuminate the small-scale dynamics and clumpiness which show the role of dust in driving the outflow. The overall ellipsoidal shape may be due to properties of the dust, such as its behaviour in the stellar magnetic field, or to interaction between the wind and circumstellar material. Maser monitoring also shows the difference between changes on the time-scale of stellar variability (a few years) and possible stages in the evolution of VY CMa to its likely fate as a supernova.

VizieR Online Data Catalog: The VLBA Extragalactic Proper Motion Catalog (Truebenbach+, 2017)

Science.gov (United States)

Truebenbach, A. E.; Darling, J.

2017-11-01

We created our catalog of extragalactic radio proper motions using the 2017a Goddard VLBI global solution. The 2017a solution is computed from more than 30 years of dual-band VLBI observations --1979 August 3 to 2017 March 27. We also observed 28 objects with either no redshift or a "questionable" Optical Characteristic of Astrometric Radio Sources (OCARS; Malkin 2016ARep...60..996M) redshift at the Apache Point Observatory (APO) 3.5m telescope and/or at Gemini North. We conducted observations on the 3.5m telescope at Apache Point Observatory with the Dual Imaging Spectrograph (DIS) from 2015 April 18 to 2016 June 30. We chose two objects for additional observations with the Gemini Multi-Object Spectrograph-North (GMOS-N) at Gemini North Observatory. 2021+317 was observed on 2016 June 26 and 28, while 0420+417 was observed on 2016 November 8 and 26. We also observed 42 radio sources with the Very Long Baseline Array (VLBA) in the X-band (3.6cm/8.3GHz). Our targets had all been previously observed by VLBI. Our VLBA observations were conducted in two campaigns from 2015 September to 2016 January and 2016 October to November. The final extragalactic proper motion catalog (created primarily from archival Goddard VLBI data, with redshifts obtained from OCARS) contains 713 proper motions with average uncertainties of 24μas/yr. (5 data files).

Determination of Proper Motions of Circumpolar Stars by Using Images from Ukrvo Plate Archives

Science.gov (United States)

Protsyuk, Yu.; Andruk, V.; Mazhaev, A.; Kovylianska, O.; Protsyuk, S.; Golovnya, V.

UkrVO plate archives contain informationobtained at different time periods and in different observatories for the same regions of the sky [3, 5, 6, 7, 8]. It allows us to carry out joint processing of plates and to receive new results for interesting objects. To obtain proper motions of stars in circumpolar areas, we selected 34 photographic plates from the RI NAO archive and 161 plates from the archive of the MAO NAS. A mean epoch difference between the plates from these archives is 55 years. Scanning of the plates and data processing were independently carried out by both observatories. A catalog of equatorial positions for 195 thousand stars up to 15m was compiled in the RI NAO (black dots in Fig. 1). A catalog of equatorial positions for 1050 thousand stars up to 16.5m was compiled in MAO (gray dots in Fig. 1). A comparison of positions for common stars contained in these catalogs was conducted. A catalog of proper motions for 30 thousand common stars up to 15m was compiled using these two input catalogs. The obtained result suggests the advisability of processing of all observations to receive proper motions of stars up to 14-15m in the declination zone of 65° to 90°.

The Effect of Education by Pharmacists for Hyperlipidemic Patients Treated With Statins on Patient’s Beliefs About Proper Use of Medications

Directory of Open Access Journals (Sweden)

Mehrpooya M

2017-06-01

Full Text Available Introduction: Hyperlipidemia is one of the most common chronic diseases found in millions of people. Studies have shown that the patient’s adherences to medication instructions provided by the pharmacist or doctor are important, yet unfortunately many patients do not adhere to proper usage of these drugs. The aim of this study was the evaluation of the effect of education by pharmacists for hyperlipidemic patients treated with statins on patient beliefs about the proper use of medications and compliance. Methods: In this interventional clinical trial study, the studied population was all hospitalized patients with heart disease treated with statins at Hamadan Farshchian hospital from January 2016 to June 2016. The sample size in this study was 50. Information was obtained in relation to each patient, using 2 questionnaires including demographic characteristics and beliefs questionnaire. Data were analyzed using the SPSS.19 software and t test, Mann-Whitney, and X2 tests. Significance level was considered less than 0.05 Results: Statistical test results showed that before the intervention, treatment belief was not significantly different between the 2 groups (P = 0.54, yet after the intervention the treatment belief increased in the intervention group (P = 0.007 and concern about using the drug declined. Conclusions: These findings suggest that education by pharmacists in patients with hyperlipidemia could have a positive and effective role on their belief about the proper use of drugs. In other words, it could have a role in the control of chronic diseases and could help promote public health.

Possible Solution to Publication Bias Through Bayesian Statistics, Including Proper Null Hypothesis Testing

NARCIS (Netherlands)

Konijn, Elly A.; van de Schoot, Rens; Winter, Sonja D.; Ferguson, Christopher J.

2015-01-01

The present paper argues that an important cause of publication bias resides in traditional frequentist statistics forcing binary decisions. An alternative approach through Bayesian statistics provides various degrees of support for any hypothesis allowing balanced decisions and proper null

Adaptation of Proper Nouns in Czech-American Periodicals at the End of the 19th Century

OpenAIRE

Burdová, Kateřina

2016-01-01

The bachelor's thesis focuses on the process of adaptation of proper nouns in chosen periodicals of the end of the 19th century that were published in the USA by Czech immigrants. Based on the analysis of periodicals collected from the Library of the Naprstek Museum of Prague there originated a list of proper nouns that has been studied from various points of view, namely the phonetics and phonology, morphology including the word-class competition (Cedar Rapidský - Cedar Rapids), translatedan...

Proper and incorrect body posture in students from music schools

OpenAIRE

Hadlich, Roland

2017-01-01

Hadlich Roland. Proper and incorrect body posture in students from music schools. Journal of Education, Health and Sport. 2017;7(2):562-584. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.556100 http://ojs.ukw.edu.pl/index.php/johs/article/view/4405 The journal has had 7 points in Ministry of Science and Higher Education parametric evaluation. Part B item 1223 (26.01.2017). 1223 Journal of Education, Health and Sport eISSN 2391-8306 7 © The Author...

Management Control in New Product Development

DEFF Research Database (Denmark)

Jørgensen, Brian; Messner, Martin

2009-01-01

organizations to better manage tensions between efficiency and flexibility, which is arguably a key issue in many organizations today. Our paper contributes to this stream of research by detailing how enabling control functions in the particular setting of new product development. To this end, we draw upon......Several studies in management control have drawn upon the concepts of coercive and enabling forms of bureaucracy (Adler and Borys 1996) to discuss how the features of a control system may affect employees' attitudes toward control. This question is relevant because enabling forms of control allow...... and flexibility. In addition, our paper sets out to explore how strategic change can influence the operation of enabling control. Focusing on the introduction of a new product strategy in our case organization, we describe employees' repair efforts in adapting the control system to their own needs. We find...

Management Control in Enterprise System Enabled Organizations: A Literature Review

DEFF Research Database (Denmark)

Rikhardsson, Pall M.; Rohde, C.; Rom, A.

2006-01-01

The objective of this paper is to add to the limited body of knowledge on the relationship between enterprise systems (ES) and management control. Based on a literature review, we describe and classify studies that empirically address this relationship. Apart from not being extensive, the research...... done so far primarily addresses the relationship between management control and ES based on a limited number of methodologies and approaches. We argue that there seems to be a need for more research done from functionalistic and critical perspectives, as well which employs a greater variety...

Secondary Control for Compensation of Voltage Harmonics and Unbalance in Microgrids

DEFF Research Database (Denmark)

Savaghebi, Mehdi; Vasquez, Juan Carlos; Jalilian, Alireza

2012-01-01

of these controllers includes a selective virtual impedance loop which is considered to improve sharing of fundamental and harmonic components of load current among the DG units. The sharing improvement is provided at the expense of increasing voltage unbalance and harmonic distortion. Thus, the secondary control...... level is applied to manage the compensation of SLB voltage unbalance and harmonics by sending proper control signals to the primary level. DGs compensation efforts are controlled locally at the primary level. The system design procedure for selecting proper control parameters is discussed. Simulation...

A Study on How to Breathe Properly When Practicing Tai Chi Chuan

Science.gov (United States)

Yang, Hanchun

2011-01-01

When practicing Tai Chi Chuan, proper breath plays an important role in shaping Tai Chi Chuan's style and its fitness value. The paper aims to analyse the postures of Tai Chi Chuan and its breath characteristics. The paper also presents some new insights on how to co-ordinate breath with postures by case studies.

OGC® Sensor Web Enablement Standards

Directory of Open Access Journals (Sweden)

George Percivall

2006-09-01

Full Text Available This article provides a high-level overview of and architecture for the Open Geospatial Consortium (OGC standards activities that focus on sensors, sensor networks, and a concept called the “Sensor Web”. This OGC work area is known as Sensor Web Enablement (SWE. This article has been condensed from "OGC® Sensor Web Enablement: Overview And High Level Architecture," an OGC White Paper by Mike Botts, PhD, George Percivall, Carl Reed, PhD, and John Davidson which can be downloaded from http://www.opengeospatial.org/pt/15540. Readers interested in greater technical and architecture detail can download and read the OGC SWE Architecture Discussion Paper titled “The OGC Sensor Web Enablement Architecture” (OGC document 06-021r1, http://www.opengeospatial.org/pt/14140.

Fundamental plant biology enabled by the space shuttle.

Science.gov (United States)

Paul, Anna-Lisa; Wheeler, Ray M; Levine, Howard G; Ferl, Robert J

2013-01-01

The relationship between fundamental plant biology and space biology was especially synergistic in the era of the Space Shuttle. While all terrestrial organisms are influenced by gravity, the impact of gravity as a tropic stimulus in plants has been a topic of formal study for more than a century. And while plants were parts of early space biology payloads, it was not until the advent of the Space Shuttle that the science of plant space biology enjoyed expansion that truly enabled controlled, fundamental experiments that removed gravity from the equation. The Space Shuttle presented a science platform that provided regular science flights with dedicated plant growth hardware and crew trained in inflight plant manipulations. Part of the impetus for plant biology experiments in space was the realization that plants could be important parts of bioregenerative life support on long missions, recycling water, air, and nutrients for the human crew. However, a large part of the impetus was that the Space Shuttle enabled fundamental plant science essentially in a microgravity environment. Experiments during the Space Shuttle era produced key science insights on biological adaptation to spaceflight and especially plant growth and tropisms. In this review, we present an overview of plant science in the Space Shuttle era with an emphasis on experiments dealing with fundamental plant growth in microgravity. This review discusses general conclusions from the study of plant spaceflight biology enabled by the Space Shuttle by providing historical context and reviews of select experiments that exemplify plant space biology science.

Proper motion separation of Be stars in the Milky Way and the Magellanic Clouds

Science.gov (United States)

Vieira, K.; García, A.; Sabogal, B.

2018-01-01

We present a proper motion investigation of a sample of Be stars candidates towards the Large Magellanic Cloud (LMC), which has resulted in the identification of two separate populations, in the Galactic foreground and in the Magellanic background. OGLE BVI and 2MASS JHK photometry were used with the SPM4 proper motions to discriminate the different populations located towards the LMC. Two populations with distinctive infrared colours and noticeable different kinematics were found, the bluer sample is consistent with being in the LMC and the redder one with belonging to the Milky Way (MW) disk. This settles the nature of the redder sample which had been described in previous publications as a possible unknown subclass of stars among the Be candidates in the LMC.

A deep proper motion catalog within the Sloan digital sky survey footprint

International Nuclear Information System (INIS)

Munn, Jeffrey A.; Harris, Hugh C.; Tilleman, Trudy M.; Hippel, Ted von; Kilic, Mukremin; Liebert, James W.; Williams, Kurtis A.; DeGenarro, Steven; Jeffery, Elizabeth

2014-01-01

A new proper motion catalog is presented, combining the Sloan Digital Sky Survey (SDSS) with second epoch observations in the r band within a portion of the SDSS imaging footprint. The new observations were obtained with the 90prime camera on the Steward Observatory Bok 90 inch telescope, and the Array Camera on the U.S. Naval Observatory, Flagstaff Station, 1.3 m telescope. The catalog covers 1098 square degrees to r = 22.0, an additional 1521 square degrees to r = 20.9, plus a further 488 square degrees of lesser quality data. Statistical errors in the proper motions range from 5 mas year −1 at the bright end to 15 mas year −1 at the faint end, for a typical epoch difference of six years. Systematic errors are estimated to be roughly 1 mas year −1 for the Array Camera data, and as much as 2–4 mas year −1 for the 90prime data (though typically less). The catalog also includes a second epoch of r band photometry.

A deep proper motion catalog within the Sloan digital sky survey footprint

Energy Technology Data Exchange (ETDEWEB)

Munn, Jeffrey A.; Harris, Hugh C.; Tilleman, Trudy M. [US Naval Observatory, Flagstaff Station, 10391 West Naval Observatory Road, Flagstaff, AZ 86005-8521 (United States); Hippel, Ted von [Embry-Riddle Aeronautical University, Physical Sciences, 600 South Clyde Morris Boulevard Daytona Beach, FL 32114-3900 (United States); Kilic, Mukremin [University of Oklahoma, Homer L. Dodge Department of Physics and Astronomy, 440 West Brooks Street, Norman, OK 73019 (United States); Liebert, James W. [University of Arizona, Steward Observatory, Tucson, AZ 85721 (United States); Williams, Kurtis A. [Department of Physics and Astronomy, Texas A and M University-Commerce, P.O. Box 3011, Commerce, TX 75429 (United States); DeGenarro, Steven [Department of Astronomy, University of Texas at Austin, 1 University Station C1400, Austin, TX 78712-0259 (United States); Jeffery, Elizabeth, E-mail: jam@nofs.navy.mil, E-mail: hch@nofs.navy.mil, E-mail: trudy@nofs.navy.mil, E-mail: ted.vonhippel@erau.edu, E-mail: kilic@ou.edu, E-mail: jamesliebert@gmail.com, E-mail: kurtis.williams@tamuc.edu, E-mail: studiofortytwo@yahoo.com, E-mail: ejeffery@byu.edu [BYU Department of Physics and Astronomy, N283 ESC, Provo, UT 84602 (United States)

2014-12-01

A new proper motion catalog is presented, combining the Sloan Digital Sky Survey (SDSS) with second epoch observations in the r band within a portion of the SDSS imaging footprint. The new observations were obtained with the 90prime camera on the Steward Observatory Bok 90 inch telescope, and the Array Camera on the U.S. Naval Observatory, Flagstaff Station, 1.3 m telescope. The catalog covers 1098 square degrees to r = 22.0, an additional 1521 square degrees to r = 20.9, plus a further 488 square degrees of lesser quality data. Statistical errors in the proper motions range from 5 mas year{sup −1} at the bright end to 15 mas year{sup −1} at the faint end, for a typical epoch difference of six years. Systematic errors are estimated to be roughly 1 mas year{sup −1} for the Array Camera data, and as much as 2–4 mas year{sup −1} for the 90prime data (though typically less). The catalog also includes a second epoch of r band photometry.

Watershed Controls on the Proper Scale of Economic Markets for Pollution Reduction

Science.gov (United States)

Rigby, J.; Doyle, M. W.; Yates, A.

2010-12-01

Markets for tradable discharge permits (TDPs) are an increasingly popular policy instrument for obtaining cost-effective nutrient reduction targets across watersheds. Such markets are also an emerging, dynamic coupling between economic institutions and stream hydrology/biogeochemistry as trading markets become explicit determinants for the spatial distribution of stream nutrient loads. A central problem in any environmental market program is setting the size of the market, as there are distinct trade-offs for large versus small markets. While the overall cost-effectiveness of permit trading increases with the size of the market, the potential for localized and highly damaging nutrient concentrations, or “hotspots”, also increases. Smaller market size reduces the potential for hot spots by dispersing the location of trades, but this may increase the net costs of water quality compliance significantly through both the restriction of possible trading partners and price manipulation by market participants. This project couples a microeconomic model for TDPs (based on possible configurations of mutually exclusive trading zones within the basin) with a semi-distributed water quality model to examine watershed controls on the configuration and scale of such markets. Our results show a wide variation in total annual cost of pollution abatement based on choice of market design -- often with large differences in cost between very similar configurations. This framework is also applied to a 10-member trading program among wastewater treatment plants in the Neuse River, NC, in order to assess (1) the optimum market design for the Upper Neuse basin and (2) how these costs compare with expected costs under alternative market structures (e.g., trading ratio system) and (3) the cost improvements over traditional command-and-control regulatory frameworks. We find that the optimal zone configuration is almost always a lower cost option when compared to a trading ratio scheme and

Enabling Open Innovation: Lessons from Haier

Institute of Scientific and Technical Information of China (English)

Arie Y.Lewin; Liisa V(a)likangas; Jin Chen

2017-01-01

Open innovation has become a dominant innovation paradigm.However,the actual adoption of open innovation organizational designs and practices remains elusive,and ongoing examples of large companies practicing open innovation in mature industries or beyond R&D activities are rare.Despite the continuing interest in open innovation and the surging research on the topic,not much is documented about how,in particular,large companies interpret and implement open innovation or develop and sustain an innovation-enabling culture.This paper reports on a study of Haier's adoption of six radical innovations as it implements an open innovation organization over a period of seven years.The study is unique in that the cases reveal how open innovation is enabled by the socially enabling mechanisms developed under Chairman Ruimin Zhang's leadership.These varied enabling mechanisms open the organization to serendipity at every level,from the bottom up to suppliers.Most importantly,the mechanisms imprint and sustain an open innovation culture recognized as important-yet often left unarticulated in terms of how it is practiced-in the prior literature.The paper contributes to and highlights the centrality of socially enabling mechanisms underlying an organization's innovation absorptive capacity.

Engineering IT-enabled sustainable electricity services the tale of two low-cost green Azores Islands

CERN Document Server

Xie, Le; Liu, Qixing

2013-01-01

Engineering IT-Enabled Electricity Services: The Tale of Two Low-Cost Green Azores Islands covers sustainable energy services to customers - a balanced choice and coordination of energy generated by traditional and alternative sources. The “Green Islands” project represents a decade of work by over a dozen researchers who have developed a model designed to utilize the potential of distributed clean resources. The key is the proper use of Information Technology (IT).  Sited on two islands in the Azores, the project developed the model of careful forecasting of demand and supply, down to the minute, coordinating the output of conventional power plants, wind energy, fly wheels, hydroelectricity, demand reduction, and even plug-in electric vehicles to take full advantage of the clean resources available. This contributed volume presents methods for predicting variable resources, such as wind power generation, and analyzes the achievable accuracy of these predictions. Throughout this book, contributors sho...

Translating Proper Nouns: A Case Study on English Translation of Hafez's Lyrics

Science.gov (United States)

Shirinzadeh, Seyed Alireza; Mahadi, Tengku Sepora Tengku

2014-01-01

Proper nouns are regarded so simple that they might be taken for granted in translation explorations. Some may believe that they should not be translated in transmitting source texts to target texts. But, it is not the case; if one looks at present translations, he will notice that different strategies might be applied for translating proper…

The VMC survey. XXX. Stellar proper motions in the central parts of the Small Magellanic Cloud

Science.gov (United States)

Niederhofer, F.; Cioni, M.-R. L.; Rubele, S.; Schmidt, T.; Bekki, K.; Grijs, R. de; Emerson, J.; Ivanov, V. D.; Marconi, M.; Oliveira, J. M.; Petr-Gotzens, M. G.; Ripepi, V.; van Loon, J. Th.; Zaggia, S.

2018-05-01

We present the first spatially resolved map of stellar proper motions within the central ( 3.1 × 2.4 kpc) regions of the Small Magellanic Cloud (SMC). The data used for this study encompasses four tiles from the ongoing near-infrared VISTA survey of the Magellanic Clouds system and covers a total contiguous area on the sky of 6.81 deg2. Proper motions have been calculated independently in two dimensions from the spatial offsets in the Ks filter over time baselines between 22 and 27 months. The reflex motions of approximately 33 000 background galaxies are used to calibrate the stellar motions to an absolute scale. The resulting catalog is composed of more than 690 000 stars which have been selected based on their position in the (J - Ks, Ks) color-magnitude diagram. For the median absolute proper motion of the SMC, we find (μαcos(δ), μδ) = (1.087 ± 0.192 (sys.) ± 0.003 (stat.), -1.187 ± 0.008 (sys.) ± 0.003 (stat.)) mas yr-1, consistent with previous studies. Mapping the proper motions as a function of position within the SMC reveals a nonuniform velocity pattern indicative of a tidal feature behind the main body of the SMC and a flow of stars in the south-east moving predominantly along the line-of-sight. Based on observations made with VISTA at the Paranal Observatory under program ID 179.B-2003.

Principles of Proper Nutrition in Children with Celiac Disease

Directory of Open Access Journals (Sweden)

H Khajavikia

2014-04-01

Full Text Available   Introduction: Celiac disease (CD is a hereditary disorder of the immune system which damages the mucosa of the small intestine caused by gluten consumption(even very small amounts. Villous atrophy, leads to malabsorption, which is due to decreased absorption levels. The first bowel symptoms are seen during the first 2 years of life. Currently, the only treatment is to compliance with a gluten-free diet lifelong. The purpose of this study was to introduce the principles of proper nutrition in children with CD to prevent complications of malabsorption.   Results: The patients do not tolerate the proteins of cereals in bread such as wheat, barley, black barley and rye. Substituting wheat flour with rice flour, corn and potatoes and using olive oil, sunflower, corn oil and peanut oil for cooking is recommended. Until the disappearance of symptoms, consumption of milk, fat and high-fiber foods should be avoided. Deficiency of folic acid, iron, vitamin B12 and calcium are common. If necessary, iron, folic acid and multivitamin can be used. These children need proper energy according to their personal needs and should have a diet high in protein. Consumption of potatoes, corn, vegetables, fruits, meat, fish, poultry, eggs, dairy and nuts (non- roasted in any form is allowed. Identifying foods which contain gluten (prepared sauces, sausages, salami, herbal supplements, all canned meat products, crushed barbecue, prepared soups, espresso and coffee , white vinegar, curd, dried milk, pasta, pastries prepared by wheat flour, compote and food supplements is recommended.   Conclusions: The identification of substances containing gluten by parents and children, and removal of harmful substances from the diet causes the intestines to quickly begin to rebuild itself. Keywords: Nutrition, Child, Celiac, Diet.

Design of energy efficient optical networks with software enabled integrated control plane

DEFF Research Database (Denmark)

Wang, Jiayuan; Yan, Ying; Dittmann, Lars

2015-01-01

energy consumption by proposing a new integrated control plane structure utilising Software Defined Networking technologies. The integrated control plane increases the efficiencies of exchanging control information across different network domains, while introducing new possibilities to the routing...... methods and the control over quality of service (QoS). The structure is defined as an overlay generalised multi-protocol label switching (GMPLS) control model. With the defined structure, the integrated control plane is able to gather information from different domains (i.e. optical core network......'s) routing behaviours. With the flexibility of the routing structure, results show that the energy efficiency of the network can be improved without compromising the QoS for delay/blocking sensitive services....

Application of group theory to proper vibrations in an electric circuit

OpenAIRE

Hosoya, Masahiko; 細谷, 将彦

2010-01-01

Group-theoretical analysis is first presented to three-dimensional behavior of an electric circuit. All the modes of proper vibration are found and assigned to each irreducible representation of symmetrical group of the circuit without solving its circuit equations. In order that an electromagnetic radiation from the outside may induce each vibration, a selection rule which is similar to that in infrared absorption must be fulfilled. The circuit may be used as a directive antenna.

Project B610 process control configuration acceptance test procedure

International Nuclear Information System (INIS)

Silvan, G.R.

1994-01-01

The purpose of this test is to verify the Westinghouse configuration of the MICON A/S Distributed Control System for project B610. The following will be verified: proper assignment and operation of all field inputs to and outputs from the MICON Termination panels; proper operation of all display data on the operator's console; proper operation of all required alarms; and proper operation of all required interlocks. The MICON A/S control system is configured to replace all the control, indication, and alarm panels now located in the Power Control Room. Nine systems are covered by this control configuration, 2736-ZB HVAC, 234-5Z HVAC, Process Vacuum, Dry Air, 291-Z Closed Loop Cooling, Building Accelerometer, Evacuation Siren, Stack CAMs, and Fire. The 2736-ZB HVAC system consists of the ventilation controls for 2736-ZB and 2736-Z as well as alarms for the emergency generators and 232-Z. The 234-5Z HVAC system is the ventilation controls for 235-5Z and 236-Z buildings. Process Vacuum covers the controls for the 26 inch vacuum system. Dry Air covers the controls for the steam and electric air dryers. The 291-Z Closed Loop Cooling system consists of the status indications and alarms for the 291-Z compressor and vacuum pump closed loop cooling system. The rest of closed loop cooling was tested earlier. The Building Accelerometer system consists of the status indications for the two seismic system accelerometers. The Evacuation Siren system includes the controls for the evacuation and take cover sirens. Stack CAMs cover the alarms for the various building ventilation stack continuous air monitors. Finally, the Fire system covers the various fire alarms now located in Room 321-A

On the classical Maxwell-Lorentz electrodynamics, the electron inertia problem, and the Feynman proper time paradigm

International Nuclear Information System (INIS)

Prykarpatsky, A.K.; Bogolubov, J.R.

2016-01-01

The classical Maxwell electromagnetic field and the Lorentz-type force equations are rederived in the framework of the Feynman proper time paradigm and the related vacuum field theory approach. The classical Ampere law origin is rederived, and its relationship with the Feynman proper time paradigm is discussed. The electron inertia problem is analyzed in detail within the Lagrangian and Hamiltonian formalisms and the related pressure-energy compensation principle of stochastic electrodynamics. The modified Abraham-Lorentz damping radiation force is derived and the electromagnetic electron mass origin is argued

Ideal asymmetric supercapacitors consisting of polyaniline nanofibers and graphene nanosheets with proper complementary potential windows

International Nuclear Information System (INIS)

Hung, P.-J.; Chang, K.-H.; Lee, Y.-F.; Hu, C.-C.; Lin, K.-M.

2010-01-01

Polyaniline (PANI) nanofibers are synthesized via a chemical method of rapid mixing for the application of asymmetric supercapacitors. The diameter and aspect ratio of PANI nanofibers is found to be controllable by varying the aniline/oxidant concentration ratio. The ideal capacitive responses of PANI nanofibers between 0.2 and 0.7 V (vs. Ag/AgCl) in concentrated acidic media are demonstrated by cyclic voltammetric (CV) and electrochemical impedance spectroscopic (EIS) analyses coupled with a schematic equivalent-circuit model. The morphologies and textures of nanofibers are examined by scanning electron microscopic (SEM), transmission electron microscopic (TEM) and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopic analyses. An aqueous asymmetric supercapacitor, consisting of a PANI nanofiber cathode and a graphene anode, with proper complementary potential windows is demonstrated in this work, which shows the device energy and power densities of 4.86 Wh kg -1 and 8.75 kW kg -1 , respectively.

Ideal asymmetric supercapacitors consisting of polyaniline nanofibers and graphene nanosheets with proper complementary potential windows

Energy Technology Data Exchange (ETDEWEB)

Hung, P.-J. [Department of Chemical Engineering, National Tsing Hua University, 101, Section 2, Kuang Fu Road, Hsin-Chu 30013, Taiwan (China); Chang, K.-H. [Department of Chemical Engineering, National Tsing Hua University, 101, Section 2, Kuang Fu Road, Hsin-Chu 30013, Taiwan (China); Department of Chemical Engineering, National Chung Cheng University, Chia-Yi 621, Taiwan (China); Lee, Y.-F. [Department of Chemical Engineering, National Tsing Hua University, 101, Section 2, Kuang Fu Road, Hsin-Chu 30013, Taiwan (China); Hu, C.-C., E-mail: cchu@che.nthu.edu.t [Department of Chemical Engineering, National Tsing Hua University, 101, Section 2, Kuang Fu Road, Hsin-Chu 30013, Taiwan (China); Lin, K.-M. [Department of Chemical Engineering, National Tsing Hua University, 101, Section 2, Kuang Fu Road, Hsin-Chu 30013, Taiwan (China)

2010-08-01

Polyaniline (PANI) nanofibers are synthesized via a chemical method of rapid mixing for the application of asymmetric supercapacitors. The diameter and aspect ratio of PANI nanofibers is found to be controllable by varying the aniline/oxidant concentration ratio. The ideal capacitive responses of PANI nanofibers between 0.2 and 0.7 V (vs. Ag/AgCl) in concentrated acidic media are demonstrated by cyclic voltammetric (CV) and electrochemical impedance spectroscopic (EIS) analyses coupled with a schematic equivalent-circuit model. The morphologies and textures of nanofibers are examined by scanning electron microscopic (SEM), transmission electron microscopic (TEM) and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectroscopic analyses. An aqueous asymmetric supercapacitor, consisting of a PANI nanofiber cathode and a graphene anode, with proper complementary potential windows is demonstrated in this work, which shows the device energy and power densities of 4.86 Wh kg{sup -1} and 8.75 kW kg{sup -1}, respectively.

Colon cancer controls versus population controls in case-control studies of occupational risk factors

DEFF Research Database (Denmark)

Kaerlev, Linda; Lynge, Elsebeth; Sabroe, Svend

2004-01-01

are interchangeable with the experience for population controls. Patient controls may even be preferable from population controls under certain conditions. In this study we examine if colon cancer patients can serve as surrogates for proper population controls in case-control studies of occupational risk factors...... about occupational, medical and life style conditions. RESULTS: No statistical significant difference for educational level, medical history or smoking status was seen between the two control groups. There was evidence of a higher alcohol intake, less frequent work as a farmer and less exposure...... to pesticides among colon cancer controls. CONCLUSIONS: Use of colon cancer controls may provide valid exposure estimates in studies of many occupational risk factors for cancer, but not for studies on exposure related to farming....

May the blessed man win: a critique of the categorical preference for natural talent over doping as proper origins of athletic ability.

Science.gov (United States)

Bonte, Pieter; Sterckx, Sigrid; Pennings, Guido

2014-08-01

Doping scandals can reveal unresolved tensions between the meritocratic values of equal opportunity + reward for effort and the "talentocratic" love of hereditary privilege. Whence this special reverence for talent? We analyze the following arguments: (1) talent is a unique indicator of greater potential, whereas doping enables only temporary boosts (the fluke critique); (2) developing a talent is an authentic endeavor of "becoming who you are," whereas reforming the fundamentals of your birth suit via artifice is an act of alienation (the phony critique); (3) your (lack of) talent informs you of your proper place and purpose in life, whereas doping frustrates such an amor fati self-understanding (the fateless critique). We conclude that these arguments fail to justify a categorical preference for natural talent over integrated artifice. Instead, they illustrate the extent to which unsavory beliefs about "nature's aristocracy" may still be at play in the moral theatre of sports. © The Author 2014. Published by Oxford University Press, on behalf of the Journal of Medicine and Philosophy Inc. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

An input shaping controller enabling cranes to move without sway

International Nuclear Information System (INIS)

Singer, N.; Singhose, W.; Kriikku, E.

1997-01-01

A gantry crane at the Savannah River Technology Center was retrofitted with an Input Shaping controller. The controller intercepts the operator's pendant commands and modifies them in real time so that the crane is moved without residual sway in the suspended load. Mechanical components on the crane were modified to make the crane suitable for the anti-sway algorithm. This paper will describe the required mechanical modifications to the crane, as well as, a new form of Input Shaping that was developed for use on the crane. Experimental results are presented which demonstrate the effectiveness of the new process. Several practical considerations will be discussed including a novel (patent pending) approach for making small, accurate moves without residual oscillations

Project Planning and Control in a Developing Economy: Implementation and Realisation

Directory of Open Access Journals (Sweden)

H. Abdul-Rahman

2005-12-01

Full Text Available In the competitive and uncertain environment of the construction industry, the ability to deliver end products with the required quality, schedule and budget is vital to the survival of any construction-related firm. Before embarking on any project, realistic planning and, consequently, a control procedure must be in place to enable the parties to manage the project with sufficient degree of authority and certainty. This paper addresses issues associated with the implementation of project planning and control, identificati on of impacts in the implementation of project planning and the critical success factors of project planning. A questionnaire survey was conducted on construction professionals and contractors involved in the running of construction projects. The survey results showed that common problems associated with the project planning and control are the lack of experienced staff and poor coordination by the contractor. During site operation, a delay in decision making aggravates the effect of poor planning and control and much of the effect of project planning rests on the pro-activeness of experienced staff. The positive impact associated with proper planning and control is the high probability of finishing the project on time while the negative impact is that it is a time-consuming and costly process. The critical success factors identified from the survey are Excellent Teamwork and Experienced Team.

Baseline Assessment and Prioritization Framework for IVHM Integrity Assurance Enabling Capabilities

Science.gov (United States)

Cooper, Eric G.; DiVito, Benedetto L.; Jacklin, Stephen A.; Miner, Paul S.

2009-01-01

Fundamental to vehicle health management is the deployment of systems incorporating advanced technologies for predicting and detecting anomalous conditions in highly complex and integrated environments. Integrated structural integrity health monitoring, statistical algorithms for detection, estimation, prediction, and fusion, and diagnosis supporting adaptive control are examples of advanced technologies that present considerable verification and validation challenges. These systems necessitate interactions between physical and software-based systems that are highly networked with sensing and actuation subsystems, and incorporate technologies that are, in many respects, different from those employed in civil aviation today. A formidable barrier to deploying these advanced technologies in civil aviation is the lack of enabling verification and validation tools, methods, and technologies. The development of new verification and validation capabilities will not only enable the fielding of advanced vehicle health management systems, but will also provide new assurance capabilities for verification and validation of current generation aviation software which has been implicated in anomalous in-flight behavior. This paper describes the research focused on enabling capabilities for verification and validation underway within NASA s Integrated Vehicle Health Management project, discusses the state of the art of these capabilities, and includes a framework for prioritizing activities.

An Internet enabled impact limiter material database

Energy Technology Data Exchange (ETDEWEB)

Wix, S.; Kanipe, F.; McMurtry, W.

1998-09-01

This paper presents a detailed explanation of the construction of an interest enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The technique used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience.

An Internet enabled impact limiter material database

International Nuclear Information System (INIS)

Wix, S.; Kanipe, F.; McMurtry, W.

1998-01-01

This paper presents a detailed explanation of the construction of an interest enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The technique used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience

[Construction of a system for proper TS-1 application].

Science.gov (United States)

Azuma, Sayaka; Morimoto, Shigefumi; Kagawa, Kunihiko; Katada, Yoshinori; Hasegawa, Kenji; Tabuse, Katsuyoshi

2010-03-01

TS-1 is an oral anti-tumor drug, which contains 5-chloro-2, 4-dihydroxypyridine (CDHP), a compound mainly excreted in urine. Since the CDHP concentration is increased among patients with impaired renal function, the frequency of side effects of TS-1 increases in such patients. Therefore, we constructed a computer-aided system that enables prompt monitoring of creatinine clearance (Ccr) calculated from the serum creatinine levels of patients prescribed TS-1 at the time pharmacists prepare the medicine. With this system, we found two cases who were prescribed TS-1, despite their decreased Ccr. One was a patient whose estimated Ccr was less than 30 mL/min/m2. With such renal malfunction, pharmacokinetics of the drug was considerably changed compared with normal control, and the dosage should be reduced. The other case presented with severe jaundice and had only a mild decrease of renal function (Ccr: 50 mL/min/m2). So we measured the concentration of uracil in the urine and performed a drug lymphocyte stimulation test for further investigation of concomitant affecting factors. Our system is useful because it can show pharmacists both the dosage TS-1 patients take and their renal function at a glance in real time. This system can be adapted for every medicine which might accumulate in patients with renal dysfunction.

Control rod assembly

International Nuclear Information System (INIS)

Takahashi, Akio.

1982-01-01

Purpose: To enable reliable insertion and drops of control rods, as well as insure a sufficient flow rate of coolants flowing through the control rods for attaining satisfactory cooling thereof to enable relexation of thermal stress resulted to rectifying mechanisms or the likes. Constitution: To the outer circumference of a control rod contained vertically movably within a control rod guide tube, resistive members are retractably provided in such a way as to project to close the gap between outer circumference of the control rod and the inner surface of the control rod guide tube upon engagement of a gripper of control rod drives, and retract upon release of the engagement of the gripper. Thus, since the resistive members project to provide a greater resistance to the coolants flowing between them and the control rod guide tube in the normal operation where the gripper is engaged to drive the control rod by the control rod drives, a major part of the coolant flowing into the control rod guide tube flows into the control rod. This enables to cool the control rod effectively and make the temperature distribution uniform for the coolant flowing from the upper end of the control rod guide tube to thereby attain the relaxation of the thermal stress resulted in the rectifying mechanisms or the likes. (Moriyama, K.)

The Nonuse, Misuse, and Proper Use of Pilot Studies in Experimental Evaluation Research

Science.gov (United States)

Westlund, Erik; Stuart, Elizabeth A.

2017-01-01

This article discusses the nonuse, misuse, and proper use of pilot studies in experimental evaluation research. The authors first show that there is little theoretical, practical, or empirical guidance available to researchers who seek to incorporate pilot studies into experimental evaluation research designs. The authors then discuss how pilot…

Young children's use of contrast in word learning: the case of proper names

NARCIS (Netherlands)

Hall, D.G.; Rhemtulla, M.

2014-01-01

Recent research has established that contrast can exert a powerful effect on early word learning. This study examined the role of contrast in young children's ability to learn proper names. Preschoolers heard a novel word for an unfamiliar stuffed animal in the presence of a second stuffed animal of

Preschoolers' knowledge about the appearance of proper names.

Science.gov (United States)

Stewart, Kathryn Maycumber; Pasnak, Robert

2010-10-01

Preschoolers' knowledge of the appearance of proper names was tested in three experiments with 25 boys and 22 girls from low-income families. Children from a Head Start program, whose parents signed a permission letter, participated. Their ages ranged from 3 yr. 6 mo. to 5 yr. 6 mo. (M = 52.2 mo., SD = 4.9). When shown consonant-vowel-consonant trigrams such as Rit or baF or dEg with various capitalization patterns, the children showed a tendency to recognize that CVC trigrams with the first letter capitalized or all letters capitalized were the ones most likely to represent a person's name. When their own names were substituted, which typically contained more than three letters, their performance was markedly better. Children also had a strong tendency to consider trigrams of Latin letters as more likely to be a person's name than trigrams of non-Latin characters (e.g., Sanskrit).

Enabling network-aware applications

Energy Technology Data Exchange (ETDEWEB)

Tierney, Brian L.; Gunter, Dan; Lee, Jason; Stouffer, Martin

2001-08-01

Many high performance distributed applications use only a small fraction of their available bandwidth. A common cause of this problem is not a flaw in the application design, but rather improperly tuned network settings. Proper tuning techniques, such as setting the correct TCP buffers and using parallel streams, are well known in the networking community, but outside the networking community they are infrequently applied. In this paper, we describe a service that makes the task of network tuning trivial for application developers and users. Widespread use of this service should virtually eliminate a common stumbling block for high performance distributed applications.

Topic B. Disposal objectives: are they fair and properly defined

International Nuclear Information System (INIS)

McComble, C.

1994-01-01

In this work the author was asked to make some connections between the ethical issues that are presently being discussed and the objectives and the principles which have been espoused in the nuclear waste disposal area. He tries to group it under the following set of questions : are the objectives and principles which we espouse properly defined. Are they sufficiently complete. Have we missed any out. Did we make any additional suggestions. Are they fair when we measure them against these ethical principles. Are they too ambitious. Are we going too far in one direction. (O.L.)

A SUBSTELLAR COMMON PROPER-MOTION COMPANION TO THE PLEIAD H II 1348

International Nuclear Information System (INIS)

Geißler, Kerstin; Metchev, Stanimir A.; Pham, Alfonse; Larkin, James E.; McElwain, Michael; Hillenbrand, Lynne A.

2012-01-01

We announce the identification of a proper-motion companion to the star H II 1348, a K5 V member of the Pleiades open cluster. The existence of a faint point source 1.''1 away from H II 1348 was previously known from adaptive optics imaging by Bouvier et al. However, because of a high likelihood of background star contamination and in the absence of follow-up astrometry, Bouvier et al. tentatively concluded that the candidate companion was not physically associated with H II 1348. We establish the proper-motion association of the pair from adaptive optics imaging with the Palomar 5 m telescope. Adaptive optics spectroscopy with the integral field spectrograph OSIRIS on the Keck 10 m telescope reveals that the companion has a spectral type of M8 ± 1. According to substellar evolution models, the M8 spectral type resides within the substellar mass regime at the age of the Pleiades. The primary itself is a known double-lined spectroscopic binary, which makes the resolved companion, H II 1348B, the least massive and widest component of this hierarchical triple system and the first substellar companion to a stellar primary in the Pleiades.

5G-Enabled Tactile Internet

OpenAIRE

Simsek, Meryem; Aijaz, Adnan; Dohler, Mischa; Sachs, Joachim; Fettweis, Gerhard

2016-01-01

The long-term ambition of the Tactile Internet is to enable a democratization of skill, and how it is being delivered globally. An integral part of this is to be able to transmit touch in perceived real-time, which is enabled by suitable robotics and haptics equipment at the edges, along with an unprecedented communications network. The fifth generation (5G) mobile communications systems will underpin this emerging Internet at the wireless edge. This paper presents the most important technolo...

An internet enabled impact limiter material database

Energy Technology Data Exchange (ETDEWEB)

Wix, S.; Kanipe, F.; McMurtry, W. [Sandia National Labs., Albuquerque, NM (United States)

1998-07-01

This paper presents a detailed explanation of the construction of an internet enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The techniques used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience. (authors)

An internet enabled impact limiter material database

International Nuclear Information System (INIS)

Wix, S.; Kanipe, F.; McMurtry, W.

1998-01-01

This paper presents a detailed explanation of the construction of an internet enabled database, also known as a database driven web site. The data contained in the internet enabled database are impact limiter material and seal properties. The techniques used in constructing the internet enabled database presented in this paper are applicable when information that is changing in content needs to be disseminated to a wide audience. (authors)

VizieR Online Data Catalog: Velocity and proper motion of OB associations (Melnik+, 2009)

Science.gov (United States)

Melnik, A. M.; Dambis, A. K.

2009-11-01

For every OB-association from the list by Blaha and Humphreys (1989AJ.....98.1598B) we give the mean galactic coordinates l and b, the mean heliocentric distance r, median line-of-sight velocity Vr, the dispersion of line-of-sight velocities dvr, and number of stars with known line-of-sight velocity nvr. The line-of-sight velocities were taken from the catalog by Barbier-Brossat and Figon (1999, Cat. ). We used only the velocities measured with errors of less than 10km/s which corresponds to the quality estimations A, B, and C. We also present median proper motions of OB-associations along l- and b- coordinates, mul and mub. The data obtained for the old reduction (1997, Cat. ) are denoted by the subscript 1, whereas those based on the reduction by van Leewen (2008, Cat. ) are marked by the subscript 2. For each OB association we represent the dispersions of proper motions, dml and dmb, as well as a number of stars nmu with known proper motion. The last column shows the total number of stars with known photometric measurements, Nt, used for determination of the distances for OB-associations. The distances r correspond to the short distance scale for classical Cepheids. They are equal to the distances from the catalog by Blaha and Humphreys (1989AJ.....98.1598B), rBH, multiplied by a factor of 0.8, r=0.8*rBH. (1 data file).

Design, parametrization, and pole placement of stabilizing output feedback compensators via injective cogenerator quotient signal modules.

Science.gov (United States)

Blumthaler, Ingrid; Oberst, Ulrich

2012-03-01

Control design belongs to the most important and difficult tasks of control engineering and has therefore been treated by many prominent researchers and in many textbooks, the systems being generally described by their transfer matrices or by Rosenbrock equations and more recently also as behaviors. Our approach to controller design uses, in addition to the ideas of our predecessors on coprime factorizations of transfer matrices and on the parametrization of stabilizing compensators, a new mathematical technique which enables simpler design and also new theorems in spite of the many outstanding results of the literature: (1) We use an injective cogenerator signal module ℱ over the polynomial algebra [Formula: see text] (F an infinite field), a saturated multiplicatively closed set T of stable polynomials and its quotient ring [Formula: see text] of stable rational functions. This enables the simultaneous treatment of continuous and discrete systems and of all notions of stability, called T-stability. We investigate stabilizing control design by output feedback of input/output (IO) behaviors and study the full feedback IO behavior, especially its autonomous part and not only its transfer matrix. (2) The new technique is characterized by the permanent application of the injective cogenerator quotient signal module [Formula: see text] and of quotient behaviors [Formula: see text] of [Formula: see text]-behaviors B. (3) For the control tasks of tracking, disturbance rejection, model matching, and decoupling and not necessarily proper plants we derive necessary and sufficient conditions for the existence of proper stabilizing compensators with proper and stable closed loop behaviors, parametrize all such compensators as IO behaviors and not only their transfer matrices and give new algorithms for their construction. Moreover we solve the problem of pole placement or spectral assignability for the complete feedback behavior. The properness of the full feedback behavior

'Ethos' Enabling Organisational Knowledge Creation

Science.gov (United States)

Matsudaira, Yoshito

This paper examines knowledge creation in relation to improvements on the production line in the manufacturing department of Nissan Motor Company and aims to clarify embodied knowledge observed in the actions of organisational members who enable knowledge creation will be clarified. For that purpose, this study adopts an approach that adds a first, second, and third-person's viewpoint to the theory of knowledge creation. Embodied knowledge, observed in the actions of organisational members who enable knowledge creation, is the continued practice of 'ethos' (in Greek) founded in Nissan Production Way as an ethical basis. Ethos is knowledge (intangible) assets for knowledge creating companies. Substantiated analysis classifies ethos into three categories: the individual, team and organisation. This indicates the precise actions of the organisational members in each category during the knowledge creation process. This research will be successful in its role of showing the indispensability of ethos - the new concept of knowledge assets, which enables knowledge creation -for future knowledge-based management in the knowledge society.

Social inequalities in health: a proper concern of epidemiology.

Science.gov (United States)

Marmot, Michael; Bell, Ruth

2016-04-01

Social inequalities are a proper concern of epidemiology. Epidemiological thinking and modes of analysis are central, but epidemiological research is one among many areas of study that provide the evidence for understanding the causes of social inequalities in health and what can be done to reduce them. Understanding the causes of health inequalities requires insights from social, behavioral and biological sciences, and a chain of reasoning that examines how the accumulation of positive and negative influences over the life course leads to health inequalities in adult life. Evidence that the social gradient in health can be reduced should make us optimistic that reducing health inequalities is a realistic goal for all societies. Copyright © 2016 Elsevier Inc. All rights reserved.

Conceptual Design and Optimal Power Control Strategy for AN Eco-Friendly Hybrid Vehicle

Science.gov (United States)

Nasiri, N. Mir; Chieng, Frederick T. A.

2011-06-01

This paper presents a new concept for a hybrid vehicle using a torque and speed splitting technique. It is implemented by the newly developed controller in combination with a two degree of freedom epicyclic gear transmission. This approach enables optimization of the power split between the less powerful electrical motor and more powerful engine while driving a car load. The power split is fundamentally a dual-energy integration mechanism as it is implemented by using the epicyclic gear transmission that has two inputs and one output for a proper power distribution. The developed power split control system manages the operation of both the inputs to have a known output with the condition of maintaining optimum operating efficiency of the internal combustion engine and electrical motor. This system has a huge potential as it is possible to integrate all the features of hybrid vehicle known to-date such as the regenerative braking system, series hybrid, parallel hybrid, series/parallel hybrid, and even complex hybrid (bidirectional). By using the new power split system it is possible to further reduce fuel consumption and increase overall efficiency.

Coordinated single-phase control scheme for voltage unbalance reduction in low voltage network.

Science.gov (United States)

Pullaguram, Deepak; Mishra, Sukumar; Senroy, Nilanjan

2017-08-13

Low voltage (LV) distribution systems are typically unbalanced in nature due to unbalanced loading and unsymmetrical line configuration. This situation is further aggravated by single-phase power injections. A coordinated control scheme is proposed for single-phase sources, to reduce voltage unbalance. A consensus-based coordination is achieved using a multi-agent system, where each agent estimates the averaged global voltage and current magnitudes of individual phases in the LV network. These estimated values are used to modify the reference power of individual single-phase sources, to ensure system-wide balanced voltages and proper power sharing among sources connected to the same phase. Further, the high X / R ratio of the filter, used in the inverter of the single-phase source, enables control of reactive power, to minimize voltage unbalance locally. The proposed scheme is validated by simulating a LV distribution network with multiple single-phase sources subjected to various perturbations.This article is part of the themed issue 'Energy management: flexibility, risk and optimization'. © 2017 The Author(s).

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

Energy Technology Data Exchange (ETDEWEB)

Nafeh, A.E.-S.A.; Fahmy, F.H. [Electronics Research Institute, Cairo (Egypt); El-Zahab, E.M.A. [Cairo University, Giza (Egypt). Faculty of Engineering

2003-02-01

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller. (author)

An injection seeded single frequency Nd:YAG Q-switched laser with precisely controllable laser pulse firing time

Science.gov (United States)

Wu, Frank F.; Khizhnyak, Anatoliy; Markov, Vladimir

2010-02-01

We have realized a single frequency Q-switched Nd:YAG laser with precisely controllable lasing time and thus enabled synchronization of multi-laser systems. The use of injection seeding to the slave ring oscillator results in unidirectional Q-switched laser oscillation with suppression of bidirectional Q-switched oscillation that otherwise would be initiated from spontaneous emission if the seeding laser is not present. Under normal condition, the cavity is high in loss during the pumping period; then a Pockels cell opens the cavity to form the pulse build up, with a second Pockels cell to perform cavity dumping, generating the Q-switched pulse output with optimized characteristics. The two Pockels cells can be replaced by a single unit if an adjustable gated electrical pulse is applied to the Pockels cell in which the pulse front is used to open the cavity and the falling edge to dump the laser pulse. Proper selection of the pump parameters and Pockels-cell gating enables operation of the system in a mode in which the Q-switched pulse can be formed only under the seeding condition. The advantage of the realized regime is in stable laser operation with no need in adjustment of the seeded light wavelength and the mode of the cavity. It is found that the frequency of the Q-switched laser radiation matches well to the injected seeded laser mode. By using two-stage amplifiers, an output energy better than 300 mJ has been achieved in MOPA configuration without active control of the cavity length and with pulse width adjustability from several nanoseconds to 20 ns. The Q-switched oscillator operates not only at precisely controlled firing time but also can be tuned over wide range. This will enable multi-laser systems synchronization and frequency locking down each other if necessary.

78 FR 33891 - Safety Advisory: Compressed Gas Cylinders That Have Not Been Tested Properly

Science.gov (United States)

2013-06-05

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Properly AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Safety... otherwise safely discharged. Cylinders that are filled with a material other than an atmospheric gas should...

Control valve sizing and specification: The first step

International Nuclear Information System (INIS)

Harkins, J.F.; Hoyle, E.D.

1991-01-01

Today's modern control valve can satisfy almost any application. Special trim, materials, operators, and body configurations have been developed to meet the most severe operating conditions. The missing link in the chain connecting design to application is often the interpretation and communication of the requirements for determining the proper valve for each application. This paper addresses an important but often neglected requirement for proper selection and sizing of control valves: the determination of correct input data. It presents criteria necessary to ensure that the data given the manufacturer accurately reflects the conditions under which the control valve will operate. It highlights the importance of communication between the system design engineer, the valve specifying engineer, and the control valve supplier, to ensure that the final system design meets the true requirements of the application. An example is provided of a simple liquid-handling system, for which line losses and variations in flow and equipment capacities are tabulated and requirements shown graphically on typical control valve characteristic curves. The effects of seemingly harmless, conservative assumptions regarding line losses, equipment capacities and selection, sizing practices, and the selection of various flow data can have on the final valve selection are illustrated. Also discussed is the proper selection of equipment and input data, based on the example

The enabling approach for housing supply

Directory of Open Access Journals (Sweden)

Ghada Farouk Hassan

2011-12-01

The paper attempts to highlight prerequisites needed to improve the success of the enabling approach in achieving adequate housing provision. Then the paper revisits the Egyptian experiences in the application of the enabling approach from 2005 till 2010. Finally, the paper highlights the main drops and lessons must be considered as promising approach after the revolution.

Water pressure control device for control rod drive

International Nuclear Information System (INIS)

Sato, Hideyuki.

1981-01-01

Purpose: To minimize the fluctuations in the reactor water level upon occurrence of abnormality by inputting the level signal of the reactor to an arithmetic unit for controlling the pressure of control rod drive water to thereby enable effective reactor level control. Constitution: Signal from a flow rate transmitter is inputted into an arithmetic unit to perform constant flow rate control upon normal operation. While on the other hand, if abnormality occurs such as feedwater pump trips, the arithmetic unit is switched from the constant flow rate control to the reactor water level control. Reactor water level signal is inputted into the arithmetic unit and the control valve is most suitably controlled, whereby water is fed from CST to the reactor by way of control rod drive water system to secure the reactor water level if feedwater to the reactor is interrupted by loss of coolants on the feedwater system. Since this enables to minimize the fluctuations in the reactor water level upon abnormality, the reactor water level can be controlled most suitably by the reactor water level signal. (Moriyama, K.)

Constraining the radio jet proper motion of the high-redshift quasar J2134-0419 at z = 4.3

Science.gov (United States)

Perger, Krisztina; Frey, Sándor; Gabányi, Krisztina É.; An, Tao; Britzen, Silke; Cao, Hong-Min; Cseh, Dávid; Dennett-Thorpe, Jane; Gurvits, Leonid I.; Hong, Xiao-Yu; Hook, Isobel M.; Paragi, Zsolt; Schilizzi, Richard T.; Yang, Jun; Zhang, Yingkang

2018-06-01

To date, PMN J2134-0419 (at a redshift z = 4.33) is the second most distant quasar known with a milliarcsecond-scale morphology permitting direct estimates of the jet proper motion. Based on two-epoch observations, we constrained its radio jet proper motion using the very long baseline interferometry (VLBI) technique. The observations were conducted with the European VLBI Network (EVN) at 5 GHz on 1999 November 26 and 2015 October 6. We imaged the central 10-pc scale radio jet emission and modelled its brightness distribution. By identifying a jet component at both epochs separated by 15.86 yr, a proper motion of μ = 0.035 ± 0.023 mas yr-1 is found. It corresponds to an apparent superluminal speed of βa = 4.1 ± 2.7 c. Relativistic beaming at both epochs suggests that the jet viewing angle with respect to the line of sight is smaller than 20°, with a minimum bulk Lorentz factor Γ = 4.3. The small value of the proper motion is in good agreement with the expectations from the cosmological interpretation of the redshift and the current cosmological model. Additionally we analysed archival Very Large Array observations of J2143-0419 and found indication of a bent jet extending to ˜30 kpc.

A geographical information based multimedia information system development for nuclear control

International Nuclear Information System (INIS)

Kim, H. T.; Park, S. S.; Lee, J. S.; Lee, J. W.; Shin, J. S.

2000-01-01

Current information technology is centered on the internet and changes our daily working pattern, particularly with multimedia information. Rapid development of information processing hardware and software has enabled us to deploy multimedia information management system of low hit counts and small amount of information volume on the desktop computer and publish multimedia information directly to the workgroup intranet with no particular additional hardware and software. Success of the timely development of the information system depends on the adoption of the proper direction and scale of information technology. The nuclear control mainly consists of safeguards, physical protection and export/import control. This paper provides an investigation on the application of openly available multiple media information to the nuclear control information management system. Information system with spatial map, image data including satellite imagery, audio, and video makes users easy to understand the current status and communicate each other easily. The Digital Terrain Elevation Data (DTED) Level 0 of the U.S. NIMA (National Imagery and Mapping Agency) is used as a base map. The multimedia information system is mainly built with Microsoft PowerPoint 2000 and Office Web component. A database with the second normal form was applied to the Office Web component. The importance of the information security was stressed

The VMC survey. XXVIII. Improved measurements of the proper motion of the Galactic globular cluster 47 Tucanae

Science.gov (United States)

Niederhofer, Florian; Cioni, Maria-Rosa L.; Rubele, Stefano; Schmidt, Thomas; Bekki, Kenji; de Grijs, Richard; Emerson, Jim; Ivanov, Valentin D.; Oliveira, Joana M.; Petr-Gotzens, Monika G.; Ripepi, Vincenzo; Sun, Ning-Chen; van Loon, Jacco Th.

2018-05-01

We use deep multi-epoch point-spread function (PSF) photometry taken with the Visible and Infrared Survey Telescope for Astronomy (VISTA) to measure and analyze the proper motions of stars within the Galactic globular cluster 47 Tucanae (47 Tuc, NGC 104). The observations are part of the ongoing near-infrared VISTA survey of the Magellanic Cloud system (VMC). The data analyzed in this study correspond to one VMC tile, which covers a total sky area of 1.77 deg2. Absolute proper motions with respect to 9070 background galaxies are calculated from a linear regression model applied to the positions of stars in 11 epochs in the Ks filter. The data extend over a total time baseline of about 17 months. We found an overall median proper motion of the stars within 47 Tuc of (μαcos(δ), μδ) = (+5.89 ± 0.02 (statistical) ± 0.13 (systematic), -2.14 ± 0.02 (statistical) ± 0.08 (systematic)) mas yr-1, based on the measurements of 35 000 individual sources between 5' and 42' from the cluster center. We compared our result to the proper motions from the newest US Naval Observatory CCD Astrograph Catalog (UCAC5), which includes data from the Gaia data release 1. Selecting cluster members ( 2700 stars), we found a median proper motion of (μαcos(δ), μδ) = (+5.30 ± 0.03 (statistical) ± 0.70 (systematic), -2.70 ± 0.03 (statistical) ± 0.70 (systematic)) mas yr-1. Comparing the results with measurements in the literature, we found that the values derived from the VMC data are consistent with the UCAC5 result, and are close to measurements obtained using the Hubble Space Telescope. We combined our proper motion results with radial velocity measurements from the literature and reconstructed the orbit of 47 Tuc, finding that the cluster is on an orbit with a low ellipticity and is confined within the inner 7.5 kpc of the Galaxy. We show that the use of an increased time baseline in combination with PSF-determined stellar centroids in crowded regions significantly improves

Mesh Network Architecture for Enabling Inter-Spacecraft Communication

Science.gov (United States)

Becker, Christopher; Merrill, Garrick

2017-01-01

To enable communication between spacecraft operating in a formation or small constellation, a mesh network architecture was developed and tested using a time division multiple access (TDMA) communication scheme. The network is designed to allow for the exchange of telemetry and other data between spacecraft to enable collaboration between small spacecraft. The system uses a peer-to-peer topology with no central router, so that it does not have a single point of failure. The mesh network is dynamically configurable to allow for addition and subtraction of new spacecraft into the communication network. Flight testing was performed using an unmanned aerial system (UAS) formation acting as a spacecraft analogue and providing a stressing environment to prove mesh network performance. The mesh network was primarily devised to provide low latency, high frequency communication but is flexible and can also be configured to provide higher bandwidth for applications desiring high data throughput. The network includes a relay functionality that extends the maximum range between spacecraft in the network by relaying data from node to node. The mesh network control is implemented completely in software making it hardware agnostic, thereby allowing it to function with a wide variety of existing radios and computing platforms..

Spatially enabled land administration

DEFF Research Database (Denmark)

Enemark, Stig

2006-01-01

enabling of land administration systems managing tenure, valuation, planning, and development will allow the information generated by these activities to be much more useful. Also, the services available to private and public sectors and to community organisations should commensurably improve. Knowledge....... In other words: Good governance and sustainable development is not attainable without sound land administration or - more broadly – sound land management. The paper presents a land management vision that incorporates the benefits of ICT enabled land administration functions. The idea is that spatial...... the communication between administrative systems and also establish more reliable data due to the use the original data instead of copies. In Denmark, such governmental guidelines for a service-oriented ITarchitecture in support of e-government are recently adopted. Finally, the paper presents the role of FIG...

The observable defects and the proper functioning guarantee in trading

Directory of Open Access Journals (Sweden)

Jorge Oviedo Albán

2014-12-01

Full Text Available This paper discusses two legal mechanisms for buyer´s protection contained in the Colombian Commercial Code, parallel to building regulations, because of hidden defects in the sale, which are: guarantee by observable defects at delivery and guarantee for proper functioning. The author analyzes the poor way such actions are enshrined in the Code as a consequence of a fragmented and dispersed regime for defective compliance actions in the laws of Private Law. This paper proposes a reinterpretation of such actions from the perspective of the lack of conformity that is based on a unified system of remedies for breach, concepts embodied in modern instruments of contract law.

Enzyme-controlled nitrogen-atom transfer enables regiodivergent C-H amination.

Science.gov (United States)

Hyster, Todd K; Farwell, Christopher C; Buller, Andrew R; McIntosh, John A; Arnold, Frances H

2014-11-05

We recently demonstrated that variants of cytochrome P450BM3 (CYP102A1) catalyze the insertion of nitrogen species into benzylic C-H bonds to form new C-N bonds. An outstanding challenge in the field of C-H amination is catalyst-controlled regioselectivity. Here, we report two engineered variants of P450BM3 that provide divergent regioselectivity for C-H amination-one favoring amination of benzylic C-H bonds and the other favoring homo-benzylic C-H bonds. The two variants provide nearly identical kinetic isotope effect values (2.8-3.0), suggesting that C-H abstraction is rate-limiting. The 2.66-Å crystal structure of the most active enzyme suggests that the engineered active site can preorganize the substrate for reactivity. We hypothesize that the enzyme controls regioselectivity through localization of a single C-H bond close to the iron nitrenoid.

Autonomous Voltage Unbalance Compensation in an Islanded Droop-Controlled Microgrid

DEFF Research Database (Denmark)

Savaghebi, Mehdi; Jalilian, Alireza; Vasquez, Juan Carlos

2013-01-01

Recently, there is an increasing interest in using distributed generators (DGs) not only to inject power into the grid, but also to enhance the power quality. In this paper, a stationary-frame control method for voltage unbalance compensation in an islanded microgrid is proposed. This method...... is based on the proper control of DGs interface converters. The DGs are controlled to compensate voltage unbalance autonomously while share the compensation effort and also active and reactive power, properly. The control system of the DGs mainly consists of active and reactive power droop controllers......, virtual impedance loop, voltage and current controllers and unbalance compensator. The design approach of the control system is discussed in detail and simulation and experimental results are presented. The results demonstrate the effectiveness of the proposed method in compensation of voltage unbalance....

Creating an enabling environment for WR&R implementation.

Science.gov (United States)

Stathatou, P-M; Kampragou, E; Grigoropoulou, H; Assimacopoulos, D; Karavitis, C; Gironás, J

2017-09-01

Reclaimed water is receiving growing attention worldwide as an effective solution for alleviating the growing water scarcity in many areas. Despite the various benefits associated with reclaimed water, water recycling and reuse (WR&R) practices are not widely applied around the world. This is mostly due to complex and inadequate local legal and institutional frameworks and socio-economic structures, which pose barriers to wider WR&R implementation. An integrated approach is therefore needed while planning the implementation of WR&R schemes, considering all the potential barriers, and aiming to develop favourable conditions for enhancing reclaimed water use. This paper proposes a comprehensive methodology supporting the development of an enabling environment for WR&R implementation. The political, economic, social, technical, legal and institutional factors that may influence positively (drivers) or negatively (barriers) WR&R implementation in the regional water systems are identified, through the mapping of local stakeholder perceptions. The identified barriers are further analysed, following a Cross-Impact/System analysis, to recognize the most significant barriers inhibiting system transition, and to prioritize the enabling instruments and arrangements that are needed to boost WR&R implementation. The proposed methodology was applied in the Copiapó River Basin in Chile, which faces severe water scarcity. Through the analysis, it was observed that barriers outweigh drivers for the implementation of WR&R schemes in the Copiapó River Basin, while the key barriers which could be useful for policy formulation towards an enabling environment in the area concern the unclear legal framework regarding the ownership of treated wastewater, the lack of environmental policies focusing on pollution control, the limited integration of reclaimed water use in current land use and development policies, the limited public awareness on WR&R, and the limited availability of

A method for determining the radius of an open cluster from stellar proper motions

Science.gov (United States)

Sánchez, Néstor; Alfaro, Emilio J.; López-Martínez, Fátima

2018-04-01

We propose a method for calculating the radius of an open cluster in an objective way from an astrometric catalogue containing, at least, positions and proper motions. It uses the minimum spanning tree in the proper motion space to discriminate cluster stars from field stars and it quantifies the strength of the cluster-field separation by means of a statistical parameter defined for the first time in this paper. This is done for a range of different sampling radii from where the cluster radius is obtained as the size at which the best cluster-field separation is achieved. The novelty of this strategy is that the cluster radius is obtained independently of how its stars are spatially distributed. We test the reliability and robustness of the method with both simulated and real data from a well-studied open cluster (NGC 188), and apply it to UCAC4 data for five other open clusters with different catalogued radius values. NGC 188, NGC 1647, NGC 6603, and Ruprecht 155 yielded unambiguous radius values of 15.2 ± 1.8, 29.4 ± 3.4, 4.2 ± 1.7, and 7.0 ± 0.3 arcmin, respectively. ASCC 19 and Collinder 471 showed more than one possible solution, but it is not possible to know whether this is due to the involved uncertainties or due to the presence of complex patterns in their proper motion distributions, something that could be inherent to the physical object or due to the way in which the catalogue was sampled.

Self-Controlling Rig for Jaw Crusher Assembly

OpenAIRE

Saurabh Jadhav; Anup Pawar

2017-01-01

The aim of the work is to develop a method for easy assembly of the bearing in the housing by standardized way. The assembly of bearing should take place on the atomized set up. Based on this method a assembly setup was constructed which enables to assembly of the shaft with bearing of different models of jaw crusher. First tests were done with manual alignment and it shows that with proper alignment shaft assembly is very easy operation and also safe. Results of those tests show that the dev...

The Stanford Automated Mounter: Enabling High-Throughput Protein Crystal Screening at SSRL

International Nuclear Information System (INIS)

Smith, C.A.; Cohen, A.E.

2009-01-01

The macromolecular crystallography experiment lends itself perfectly to high-throughput technologies. The initial steps including the expression, purification, and crystallization of protein crystals, along with some of the later steps involving data processing and structure determination have all been automated to the point where some of the last remaining bottlenecks in the process have been crystal mounting, crystal screening, and data collection. At the Stanford Synchrotron Radiation Laboratory, a National User Facility that provides extremely brilliant X-ray photon beams for use in materials science, environmental science, and structural biology research, the incorporation of advanced robotics has enabled crystals to be screened in a true high-throughput fashion, thus dramatically accelerating the final steps. Up to 288 frozen crystals can be mounted by the beamline robot (the Stanford Auto-Mounting System) and screened for diffraction quality in a matter of hours without intervention. The best quality crystals can then be remounted for the collection of complete X-ray diffraction data sets. Furthermore, the entire screening and data collection experiment can be controlled from the experimenter's home laboratory by means of advanced software tools that enable network-based control of the highly automated beamlines.

Magnetizable stent-grafts enable endothelial cell capture

Science.gov (United States)

Tefft, Brandon J.; Uthamaraj, Susheil; Harburn, J. Jonathan; Hlinomaz, Ota; Lerman, Amir; Dragomir-Daescu, Dan; Sandhu, Gurpreet S.

2017-04-01

Emerging nanotechnologies have enabled the use of magnetic forces to guide the movement of magnetically-labeled cells, drugs, and other therapeutic agents. Endothelial cells labeled with superparamagnetic iron oxide nanoparticles (SPION) have previously been captured on the surface of magnetizable 2205 duplex stainless steel stents in a porcine coronary implantation model. Recently, we have coated these stents with electrospun polyurethane nanofibers to fabricate prototype stent-grafts. Facilitated endothelialization may help improve the healing of arteries treated with stent-grafts, reduce the risk of thrombosis and restenosis, and enable small-caliber applications. When placed in a SPION-labeled endothelial cell suspension in the presence of an external magnetic field, magnetized stent-grafts successfully captured cells to the surface regions adjacent to the stent struts. Implantation within the coronary circulation of pigs (n=13) followed immediately by SPION-labeled autologous endothelial cell delivery resulted in widely patent devices with a thin, uniform neointima and no signs of thrombosis or inflammation at 7 days. Furthermore, the magnetized stent-grafts successfully captured and retained SPION-labeled endothelial cells to select regions adjacent to stent struts and between stent struts, whereas the non-magnetized control stent-grafts did not. Early results with these prototype devices are encouraging and further refinements will be necessary in order to achieve more uniform cell capture and complete endothelialization. Once optimized, this approach may lead to more rapid and complete healing of vascular stent-grafts with a concomitant improvement in long-term device performance.

Securing the Use of RFID-Enabled Banknotes

Science.gov (United States)

Martínez, Santi; Roig, Concepció; Valls, Magda

The use of RFID tags (radio-frequency identification tags) in banknotes presents a main challenge that may discourage their usage: how to avoid a possible attacker to count the amount of tags. Such a drawback is faced in this paper by designing an appropriate Medium Access Control (MAC) for this scenario. A MAC is the set of mechanisms and protocols that allows devices to share the communication channel. In a RFID system, a MAC protocol makes it possible for several tags to communicate within a common environment with the RFID reader. In this paper, we present a new MAC protocol that is suitable for ensuring security in the use of RFID-enabled banknotes. It also guarantees privacy and fits scalability requirements when the number of tags is increasing.

Light-cone gauge versus proper-time gauge for massless spinning particles

International Nuclear Information System (INIS)

Skagerstam, B.S.; Stern, A.

1987-01-01

Although the light-cone gauge is convenient for many applications in physics, it is known to distort topology. We show that as a consequence, some interesting, possibly physical, features of a quantum theory may be missed when working in the light-cone gauge. We shall illustrate this by examining the description of massless spinning particles in an arbitrary number of space-time dimensions. When quantizing such particles in four space-time dimensions (without introducing Grassmann degrees of freedom), the light-cone gauge yields a purely bosonic spectrum, i.e. the helicity λ is integer-valued. The problem is rectified by going to the proper-time gauge; there λ = 0, ±1/2, ±1, ... Upon using the proper-time gauge to quantize massless particle systems in more than four space-time dimensions, we find the following interesting features: Except for space-time dimension d equal to 5 and 9, (i) wave functions cannot be expressed as global functions of momentum (or position). (This is also true for d=4.) Further, for d ≠ 5 and 9, (ii) the helicity group spin (d-2) and (iii) canonical position operators do not exist, globally. (The result that helicity cannot be globally defined resembles a known property of nonabelian monopoles arising in grand unified theories. There, topological obstructions prevent one from defining the color group, globally.) All of the features (i)-(iii) are missed when working in the light-cone gauge. (orig.)

Selective-area growth and controlled substrate coupling of transition metal dichalcogenides

Science.gov (United States)

Bersch, Brian M.; Eichfeld, Sarah M.; Lin, Yu-Chuan; Zhang, Kehao; Bhimanapati, Ganesh R.; Piasecki, Aleksander F.; Labella, Michael, III; Robinson, Joshua A.

2017-06-01

Developing a means for true bottom-up, selective-area growth of two-dimensional (2D) materials on device-ready substrates will enable synthesis in regions only where they are needed. Here, we demonstrate seed-free, site-specific nucleation of transition metal dichalcogenides (TMDs) with precise control over lateral growth by utilizing an ultra-thin polymeric surface functionalization capable of precluding nucleation and growth. This polymer functional layer (PFL) is derived from conventional photoresists and lithographic processing, and is compatible with multiple growth techniques, precursors (metal organics, solid-source) and TMDs. Additionally, we demonstrate that the substrate can play a major role in TMD transport properties. With proper TMD/substrate decoupling, top-gated field-effect transistors (FETs) fabricated with selectively-grown monolayer MoS2 channels are competitive with current reported MoS2 FETs. The work presented here demonstrates that substrate surface engineering is key to realizing precisely located and geometrically-defined 2D layers via unseeded chemical vapor deposition techniques.

An auxiliary graph based dynamic traffic grooming algorithm in spatial division multiplexing enabled elastic optical networks with multi-core fibers

Science.gov (United States)

Zhao, Yongli; Tian, Rui; Yu, Xiaosong; Zhang, Jiawei; Zhang, Jie

2017-03-01

A proper traffic grooming strategy in dynamic optical networks can improve the utilization of bandwidth resources. An auxiliary graph (AG) is designed to solve the traffic grooming problem under a dynamic traffic scenario in spatial division multiplexing enabled elastic optical networks (SDM-EON) with multi-core fibers. Five traffic grooming policies achieved by adjusting the edge weights of an AG are proposed and evaluated through simulation: maximal electrical grooming (MEG), maximal optical grooming (MOG), maximal SDM grooming (MSG), minimize virtual hops (MVH), and minimize physical hops (MPH). Numeric results show that each traffic grooming policy has its own features. Among different traffic grooming policies, an MPH policy can achieve the lowest bandwidth blocking ratio, MEG can save the most transponders, and MSG can obtain the fewest cores for each request.

Future Integrated Fire Control

National Research Council Canada - National Science Library

Young, Bonnie W

2005-01-01

Future advances in fire control for air and missile defense depend largely on a network-enabled foundation that enables the collaborative use of distributed warfare assets for time-critical operations...

Energy Efficient, Cross-Layer Enabled, Dynamic Aggregation Networks for Next Generation Internet

Science.gov (United States)

Wang, Michael S.

Today, the Internet traffic is growing at a near exponential rate, driven predominately by data center-based applications and Internet-of-Things services. This fast-paced growth in Internet traffic calls into question the ability of the existing optical network infrastructure to support this continued growth. The overall optical networking equipment efficiency has not been able to keep up with the traffic growth, creating a energy gap that makes energy and cost expenditures scale linearly with the traffic growth. The implication of this energy gap is that it is infeasible to continue using existing networking equipment to meet the growing bandwidth demand. A redesign of the optical networking platform is needed. The focus of this dissertation is on the design and implementation of energy efficient, cross-layer enabled, dynamic optical networking platforms, which is a promising approach to address the exponentially growing Internet bandwidth demand. Chapter 1 explains the motivation for this work by detailing the huge Internet traffic growth and the unsustainable energy growth of today's networking equipment. Chapter 2 describes the challenges and objectives of enabling agile, dynamic optical networking platforms and the vision of the Center for Integrated Access Networks (CIAN) to realize these objectives; the research objectives of this dissertation and the large body of related work in this field is also summarized. Chapter 3 details the design and implementation of dynamic networking platforms that support wavelength switching granularity. The main contribution of this work involves the experimental validation of deep cross-layer communication across the optical performance monitoring (OPM), data, and control planes. The first experiment shows QoS-aware video streaming over a metro-scale test-bed through optical power monitoring of the transmission wavelength and cross-layer feedback control of the power level. The second experiment extends the performance

The OptIPuter microscopy demonstrator: enabling science through a transatlantic lightpath.

Science.gov (United States)

Ellisman, M; Hutton, T; Kirkland, A; Lin, A; Lin, C; Molina, T; Peltier, S; Singh, R; Tang, K; Trefethen, A E; Wallom, D C H; Xiong, X

2009-07-13

The OptIPuter microscopy demonstrator project has been designed to enable concurrent and remote usage of world-class electron microscopes located in Oxford and San Diego. The project has constructed a network consisting of microscopes and computational and data resources that are all connected by a dedicated network infrastructure using the UK Lightpath and US Starlight systems. Key science drivers include examples from both materials and biological science. The resulting system is now a permanent link between the Oxford and San Diego microscopy centres. This will form the basis of further projects between the sites and expansion of the types of systems that can be remotely controlled, including optical, as well as electron, microscopy. Other improvements will include the updating of the Microsoft cluster software to the high performance computing (HPC) server 2008, which includes the HPC basic profile implementation that will enable the development of interoperable clients.

The OptIPuter microscopy demonstrator: enabling science through a transatlantic lightpath

Science.gov (United States)

Ellisman, M.; Hutton, T.; Kirkland, A.; Lin, A.; Lin, C.; Molina, T.; Peltier, S.; Singh, R.; Tang, K.; Trefethen, A.E.; Wallom, D.C.H.; Xiong, X.

2009-01-01

The OptIPuter microscopy demonstrator project has been designed to enable concurrent and remote usage of world-class electron microscopes located in Oxford and San Diego. The project has constructed a network consisting of microscopes and computational and data resources that are all connected by a dedicated network infrastructure using the UK Lightpath and US Starlight systems. Key science drivers include examples from both materials and biological science. The resulting system is now a permanent link between the Oxford and San Diego microscopy centres. This will form the basis of further projects between the sites and expansion of the types of systems that can be remotely controlled, including optical, as well as electron, microscopy. Other improvements will include the updating of the Microsoft cluster software to the high performance computing (HPC) server 2008, which includes the HPC basic profile implementation that will enable the development of interoperable clients. PMID:19487201

Proper Sterol Distribution Is Required for Candida albicans Hyphal Formation and Virulence

Science.gov (United States)

McCourt, Paula; Liu, Hsing-Yin; Parker, Josie E.; Gallo-Ebert, Christina; Donigan, Melissa; Bata, Adam; Giordano, Caroline; Kelly, Steven L.; Nickels, Joseph T.

2016-01-01

Candida albicans is an opportunistic fungus responsible for the majority of systemic fungal infections. Multiple factors contribute to C. albicans pathogenicity. C. albicans strains lacking CaArv1 are avirulent. Arv1 has a conserved Arv1 homology domain (AHD) that has a zinc-binding domain containing two cysteine clusters. Here, we explored the role of the CaAHD and zinc-binding motif in CaArv1-dependent virulence. Overall, we found that the CaAHD was necessary but not sufficient for cells to be virulent, whereas the zinc-binding domain was essential, as Caarv1/Caarv1 cells expressing the full-length zinc-binding domain mutants, Caarv1C3S and Caarv1C28S, were avirulent. Phenotypically, we found a direct correlation between the avirulence of Caarv1/Caarv1, Caarrv1AHD, Caarv1C3S, and Caarv1C28S cells and defects in bud site selection, septa formation and localization, and hyphal formation and elongation. Importantly, all avirulent mutant strains lacked the ability to maintain proper sterol distribution. Overall, our results have established the importance of the AHD and zinc-binding domain in fungal invasion, and have correlated an avirulent phenotype with the inability to maintain proper sterol distribution. PMID:27587298

Proper Sterol Distribution Is Required for Candida albicans Hyphal Formation and Virulence

Directory of Open Access Journals (Sweden)

Paula McCourt

2016-11-01

Full Text Available Candida albicans is an opportunistic fungus responsible for the majority of systemic fungal infections. Multiple factors contribute to C. albicans pathogenicity. C. albicans strains lacking CaArv1 are avirulent. Arv1 has a conserved Arv1 homology domain (AHD that has a zinc-binding domain containing two cysteine clusters. Here, we explored the role of the CaAHD and zinc-binding motif in CaArv1-dependent virulence. Overall, we found that the CaAHD was necessary but not sufficient for cells to be virulent, whereas the zinc-binding domain was essential, as Caarv1/Caarv1 cells expressing the full-length zinc-binding domain mutants, Caarv1C3S and Caarv1C28S, were avirulent. Phenotypically, we found a direct correlation between the avirulence of Caarv1/Caarv1, Caarrv1AHD, Caarv1C3S, and Caarv1C28S cells and defects in bud site selection, septa formation and localization, and hyphal formation and elongation. Importantly, all avirulent mutant strains lacked the ability to maintain proper sterol distribution. Overall, our results have established the importance of the AHD and zinc-binding domain in fungal invasion, and have correlated an avirulent phenotype with the inability to maintain proper sterol distribution.

Enabling personalized implant and controllable biosystem development through 3D printing.

Science.gov (United States)

Nagarajan, Neerajha; Dupret-Bories, Agnes; Karabulut, Erdem; Zorlutuna, Pinar; Vrana, Nihal Engin

The impact of additive manufacturing in our lives has been increasing constantly. One of the frontiers in this change is the medical devices. 3D printing technologies not only enable the personalization of implantable devices with respect to patient-specific anatomy, pathology and biomechanical properties but they also provide new opportunities in related areas such as surgical education, minimally invasive diagnosis, medical research and disease models. In this review, we cover the recent clinical applications of 3D printing with a particular focus on implantable devices. The current technical bottlenecks in 3D printing in view of the needs in clinical applications are explained and recent advances to overcome these challenges are presented. 3D printing with cells (bioprinting); an exciting subfield of 3D printing, is covered in the context of tissue engineering and regenerative medicine and current developments in bioinks are discussed. Also emerging applications of bioprinting beyond health, such as biorobotics and soft robotics, are introduced. As the technical challenges related to printing rate, precision and cost are steadily being solved, it can be envisioned that 3D printers will become common on-site instruments in medical practice with the possibility of custom-made, on-demand implants and, eventually, tissue engineered organs with active parts developed with biorobotics techniques. Copyright © 2018 Elsevier Inc. All rights reserved.

How to select a proper early warning threshold to detect infectious disease outbreaks based on the China infectious disease automated alert and response system (CIDARS).

Science.gov (United States)

Wang, Ruiping; Jiang, Yonggen; Michael, Engelgau; Zhao, Genming

2017-06-12

China Centre for Diseases Control and Prevention (CDC) developed the China Infectious Disease Automated Alert and Response System (CIDARS) in 2005. The CIDARS was used to strengthen infectious disease surveillance and aid in the early warning of outbreak. The CIDARS has been integrated into the routine outbreak monitoring efforts of the CDC at all levels in China. Early warning threshold is crucial for outbreak detection in the CIDARS, but CDCs at all level are currently using thresholds recommended by the China CDC, and these recommended thresholds have recognized limitations. Our study therefore seeks to explore an operational method to select the proper early warning threshold according to the epidemic features of local infectious diseases. The data used in this study were extracted from the web-based Nationwide Notifiable Infectious Diseases Reporting Information System (NIDRIS), and data for infectious disease cases were organized by calendar week (1-52) and year (2009-2015) in Excel format; Px was calculated using a percentile-based moving window (moving window [5 week*5 year], x), where x represents one of 12 centiles (0.40, 0.45, 0.50….0.95). Outbreak signals for the 12 Px were calculated using the moving percentile method (MPM) based on data from the CIDARS. When the outbreak signals generated by the 'mean + 2SD' gold standard were in line with a Px generated outbreak signal for each week during the year of 2014, this Px was then defined as the proper threshold for the infectious disease. Finally, the performance of new selected thresholds for each infectious disease was evaluated by simulated outbreak signals based on 2015 data. Six infectious diseases were selected in this study (chickenpox, mumps, hand foot and mouth diseases (HFMD), scarlet fever, influenza and rubella). Proper thresholds for chickenpox (P75), mumps (P80), influenza (P75), rubella (P45), HFMD (P75), and scarlet fever (P80) were identified. The selected proper thresholds for these

Matched case-control studies: a review of reported statistical methodology

Directory of Open Access Journals (Sweden)

Niven DJ

2012-04-01

Full Text Available Daniel J Niven1, Luc R Berthiaume2, Gordon H Fick1, Kevin B Laupland11Department of Critical Care Medicine, Peter Lougheed Centre, Calgary, 2Department of Community Health Sciences, University of Calgary, Calgary, Alberta, CanadaBackground: Case-control studies are a common and efficient means of studying rare diseases or illnesses with long latency periods. Matching of cases and controls is frequently employed to control the effects of known potential confounding variables. The analysis of matched data requires specific statistical methods.Methods: The objective of this study was to determine the proportion of published, peer reviewed matched case-control studies that used statistical methods appropriate for matched data. Using a comprehensive set of search criteria we identified 37 matched case-control studies for detailed analysis.Results: Among these 37 articles, only 16 studies were analyzed with proper statistical techniques (43%. Studies that were properly analyzed were more likely to have included case patients with cancer and cardiovascular disease compared to those that did not use proper statistics (10/16 or 63%, versus 5/21 or 24%, P = 0.02. They were also more likely to have matched multiple controls for each case (14/16 or 88%, versus 13/21 or 62%, P = 0.08. In addition, studies with properly analyzed data were more likely to have been published in a journal with an impact factor listed in the top 100 according to the Journal Citation Reports index (12/16 or 69%, versus 1/21 or 5%, P ≤ 0.0001.Conclusion: The findings of this study raise concern that the majority of matched case-control studies report results that are derived from improper statistical analyses. This may lead to errors in estimating the relationship between a disease and exposure, as well as the incorrect adaptation of emerging medical literature.Keywords: case-control, matched, dependent data, statistics

76 FR 14543 - Federal Acquisition Regulation; Proper Use and Management of Cost-Reimbursement Contracts

Science.gov (United States)

2011-03-16

..., Sequence 1] RIN 9000-AL78 Federal Acquisition Regulation; Proper Use and Management of Cost-Reimbursement... other than firm-fixed-price contracts (e.g., cost-reimbursement, time-and-material, and labor-hour...-reimbursement contracts and identifies the following three areas that the Defense Acquisition Regulation Council...

High velocity pulse biopsy device enables controllable and precise needle insertion and high yield tissue acquisition.

Science.gov (United States)

Schässburger, Kai-Uwe; Paepke, Stefan; Saracco, Ariel; Azavedo, Edward; Ekström, Christina; Wiksell, Hans

2018-02-01

Minimally invasive biopsies are a cornerstone of breast cancer management with ultrasound being the preferred guidance modality. New developments in breast cancer management and advances in imaging technologies bring new challenges to current biopsy methodologies. A new biopsy device (NeoNavia® biopsy system, 14 G) was developed. It incorporates a pneumatic needle insertion mechanism that is intended to provide better control of needle progression and enable stepwise insertion without noticeable deformation or displacement of surrounding tissue as visualized under ultrasound. A new method of tissue acquisition was designed to achieve a sampling yield higher than standard methodologies. Needle dynamics was assessed on a specifically designed test bed and sampling performance was compared to a Magnum® biopsy instrument (Bard, Covington, GA, USA) in representative tissue models. The histological quality of samples obtained ex-vivo was evaluated. A pneumatic pulse was measured to accelerate the needle to a maximum velocity of 21.2 ± 2.5 m/s on a stroke length of 2.5 mm, achieving significantly higher acceleration, maximum velocity and power than current biopsy devices. Mean weight of samples obtained by the NeoNavia device were 3.5, 4.6, and 4.3 times higher when sampling was performed in turkey breast, calf thymus and swine pancreas, respectively, as compared to samples obtained with the Magnum instrument. Ex-vivo analysis indicates that the method of tissue acquisition has no apparent negative impact on the histopathologic quality of obtained samples. Copyright © 2018 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

MOTION VERIFIED RED STARS (MoVeRS): A CATALOG OF PROPER MOTION SELECTED LOW-MASS STARS FROM WISE, SDSS, AND 2MASS

Energy Technology Data Exchange (ETDEWEB)

Theissen, Christopher A.; West, Andrew A. [Department of Astronomy, Boston University, 725 Commonwealth Avenue, Boston, MA 02215 (United States); Dhital, Saurav, E-mail: ctheisse@bu.edu [Department of Physical Sciences, Embry-Riddle Aeronautical University, 600 South Clyde Morris Blvd., Daytona Beach, FL 32114 (United States)

2016-02-15

We present a photometric catalog of 8,735,004 proper motion selected low-mass stars (KML-spectral types) within the Sloan Digital Sky Survey (SDSS) footprint, from the combined SDSS Data Release 10 (DR10), Two Micron All-Sky Survey (2MASS) point-source catalog (PSC), and Wide-field Infrared Survey Explorer (WISE) AllWISE catalog. Stars were selected using r − i, i − z, r − z, z − J, and z − W1 colors, and SDSS, WISE, and 2MASS astrometry was combined to compute proper motions. The resulting 3,518,150 stars were augmented with proper motions for 5,216,854 earlier type stars from the combined SDSS and United States Naval Observatory B1.0 catalog (USNO-B). We used SDSS+USNO-B proper motions to determine the best criteria for selecting a clean sample of stars. Only stars whose proper motions were greater than their 2σ uncertainty were included. Our Motion Verified Red Stars catalog is available through SDSS CasJobs and VizieR.

Microsystem enabled photovoltaic modules and systems

Science.gov (United States)

Nielson, Gregory N; Sweatt, William C; Okandan, Murat

2015-05-12

A microsystem enabled photovoltaic (MEPV) module including: an absorber layer; a fixed optic layer coupled to the absorber layer; a translatable optic layer; a translation stage coupled between the fixed and translatable optic layers; and a motion processor electrically coupled to the translation stage to controls motion of the translatable optic layer relative to the fixed optic layer. The absorber layer includes an array of photovoltaic (PV) elements. The fixed optic layer includes an array of quasi-collimating (QC) micro-optical elements designed and arranged to couple incident radiation from an intermediate image formed by the translatable optic layer into one of the PV elements such that it is quasi-collimated. The translatable optic layer includes an array of focusing micro-optical elements corresponding to the QC micro-optical element array. Each focusing micro-optical element is designed to produce a quasi-telecentric intermediate image from substantially collimated radiation incident within a predetermined field of view.

Maintaining the proper connection between the centrioles and the pericentriolar matrix requires Drosophila centrosomin.

Science.gov (United States)

Lucas, Eliana P; Raff, Jordan W

2007-08-27

Centrosomes consist of two centrioles surrounded by an amorphous pericentriolar matrix (PCM), but it is unknown how centrioles and PCM are connected. We show that the centrioles in Drosophila embryos that lack the centrosomal protein Centrosomin (Cnn) can recruit PCM components but cannot maintain a proper attachment to the PCM. As a result, the centrioles "rocket" around in the embryo and often lose their connection to the nucleus in interphase and to the spindle poles in mitosis. This leads to severe mitotic defects in embryos and to errors in centriole segregation in somatic cells. The Cnn-related protein CDK5RAP2 is linked to microcephaly in humans, but cnn mutant brains are of normal size, and we observe only subtle defects in the asymmetric divisions of mutant neuroblasts. We conclude that Cnn maintains the proper connection between the centrioles and the PCM; this connection is required for accurate centriole segregation in somatic cells but is not essential for the asymmetric division of neuroblasts.

Catalogue of Positions and Proper Motions of Stars in the Vicinity of Open Clusters

Directory of Open Access Journals (Sweden)

Protsyuk, Yu.I.

2017-01-01

Full Text Available In the Research Institute Mykolaiv Astronomical Observatory (MAO the catalogue of position and proper motions of stars in the 544 square areas of nearly (1×1°around the Galactic open clusters was created using photographic and CCD observations. 293 plates of (5×5°obtained with the MAO Zonal Astrograph (D=116 mm, F=2040 mm in 1962-1993 and more than 20 thousands CCD frames (0.7×0.7° obtained with KT-50 telescope (D=500 mm, F=3000 mm in 2011-2015 were used. Almost 270 thousands FITS files from the IVOA image archives with observational epoch from 1953 to 2010 were downloaded and processed. The created catalogue contains more than 2.3 million stars (7.5-18.5m in the ICRS system with the accuracy of positions on both coordinates ranged from 0.02" to 0.05". Inner accuracy of proper motions is ~0.004"/year.

Catalogue of positions and proper motions of stars in the vicinity of open clusters

Science.gov (United States)

Protsyuk, Yu. I.; Kovalchuk, O. M.; Mazhaev, O. E.

2017-02-01

A catalog of positions and proper motions of stars in 544 square areas of nearly (1 × 1)° around the Galactic open clusters has been created using photographic and CCD observations, at Research Institute "Mykolaiv Astronomical Observatory" (RI "MAO"). To this end, 293 plates of (5 × 5)° obtained with the MAO Zonal Astrograph (D=116 mm, F=2040 mm) in 1962-1993 and more than 20 thousand CCD frames (0.7 × 0.7)° obtained with KT-50 telescope (D=500 mm, F=3000 mm) in 2011-2015 have been used. Almost 270 thousand FITS files from the IVOA image archives with observational epoch from 1953 to 2010 have been downloaded and processed. The created catalogue contains more than 2.3 million stars having a magnitude of (7.5-18.5)m in the ICRS system, with accuracy of positions for both coordinates ranging from 0.02" to 0.05". Internal accuracy of proper motions is estimated as ~0.004"/year.

Cdc42-mediated tubulogenesis controls cell specification

DEFF Research Database (Denmark)

Kesavan, Gokul; Sand, Fredrik Wolfhagen; Greiner, Thomas Uwe

2009-01-01

Understanding how cells polarize and coordinate tubulogenesis during organ formation is a central question in biology. Tubulogenesis often coincides with cell-lineage specification during organ development. Hence, an elementary question is whether these two processes are independently controlled......, or whether proper cell specification depends on formation of tubes. To address these fundamental questions, we have studied the functional role of Cdc42 in pancreatic tubulogenesis. We present evidence that Cdc42 is essential for tube formation, specifically for initiating microlumen formation and later...... for maintaining apical cell polarity. Finally, we show that Cdc42 controls cell specification non-cell-autonomously by providing the correct microenvironment for proper control of cell-fate choices of multipotent progenitors. For a video summary of this article, see the PaperFlick file with the Supplemental Data...

Securing radioactive sources through a proper management

International Nuclear Information System (INIS)

Mourao, Rogerio Pimenta

2009-01-01

The safety and security of radioactive sources have become a hot issue for the nuclear community in the last two decades. The Goiania accident in Brazil and the September 11th attack alerted governments and nuclear agencies around the world to the vulnerability of the thousands of disused radioactive sources ill-stored or misplaced in a myriad of ways, especially in countries with less developed infra-structure. Once the threat of environmental contamination or malevolent use of these sources became clear, the International Atomic Energy Agency and the American Government spawned initiatives to reduce this risk, basically stimulating the proper conditioning of the sources and, whenever possible, seeking their repatriation to the countries of origin. Since 1996 Brazil has been participating actively in this effort, having carried out hands-on operations to condition old radium sources in Latin American and Caribbean countries and also repatriated its own neutron sources to the United States. A new operation is presently being organized: the reconditioning of the high activity sources contained in teletherapy units stored in the country using a mobile hot cell developed in South Africa. Also an agreement is being negotiated between the US National Nuclear Security Agency and the Brazilian CNEN to repatriate hundreds of radioactive gauges presently stored at CNEN's source storage buildings. (author)

Enabling distributed collaborative science

DEFF Research Database (Denmark)

Hudson, T.; Sonnenwald, Diane H.; Maglaughlin, K.

2000-01-01

To enable collaboration over distance, a collaborative environment that uses a specialized scientific instrument called a nanoManipulator is evaluated. The nanoManipulator incorporates visualization and force feedback technology to allow scientists to see, feel, and modify biological samples bein...

Magnetic graphene enabled tunable microwave absorber via thermal control

Science.gov (United States)

Quan, L.; Qin, F. X.; Li, Y. H.; Estevez, D.; Fu, G. J.; Wang, H.; Peng, H.-X.

2018-06-01

By synthesizing nitrogen-doped graphene (NG) via a facile thermal annealing method, a fine control of the amount and location of doped nitrogen as well as the oxygen-containing functional groups is achieved with varying annealing temperature. The favorable magnetic properties have been achieved for N-doped rGO samples obtained at two temperatures of all NG samples, i.e., 500 °C and 900 °C with saturation magnetization of 0.63 emu g‑1 and 0.67 emu g‑1 at 2 K, respectively. This is attributed to the optimized competition of the N-doping and reduction process at 500 °C and the dominated reduction process at 900 °C. NG obtained at 300 °C affords the best overall absorbing performance: when the absorber thickness is 3.0 mm, the maximum absorption was ‑24.6 dB at 8.51 GHz, and the absorption bandwidth was 4.89 GHz (7.55–12.44 GHz) below ‑10 dB. It owes its large absorbing intensity to the good impedance match and significant dielectric loss. The broad absorption bandwidth benefits from local fluctuations of dielectric responses contributed by competing mechanisms. Despite the significant contribution from materials loss to the absorption, the one quarter-wavelength model is found to be responsible for the reflection loss peak positions. Of particular significance is that an appropriate set of electromagnetic parameters associated with reasonable reduction is readily accessible by convenient control of annealing temperature to modulate the microwave absorbing features of graphene. Thus, NG prepared by thermal annealing promises to be a highly efficient microwave absorbent.

Proper alignment of the microscope.

Science.gov (United States)

Rottenfusser, Rudi

2013-01-01

The light microscope is merely the first element of an imaging system in a research facility. Such a system may include high-speed and/or high-resolution image acquisition capabilities, confocal technologies, and super-resolution methods of various types. Yet more than ever, the proverb "garbage in-garbage out" remains a fact. Image manipulations may be used to conceal a suboptimal microscope setup, but an artifact-free image can only be obtained when the microscope is optimally aligned, both mechanically and optically. Something else is often overlooked in the quest to get the best image out of the microscope: Proper sample preparation! The microscope optics can only do its job when its design criteria are matched to the specimen or vice versa. The specimen itself, the mounting medium, the cover slip, and the type of immersion medium (if applicable) are all part of the total optical makeup. To get the best results out of a microscope, understanding the functions of all of its variable components is important. Only then one knows how to optimize these components for the intended application. Different approaches might be chosen to discuss all of the microscope's components. We decided to follow the light path which starts with the light source and ends at the camera or the eyepieces. To add more transparency to this sequence, the section up to the microscope stage was called the "Illuminating Section", to be followed by the "Imaging Section" which starts with the microscope objective. After understanding the various components, we can start "working with the microscope." To get the best resolution and contrast from the microscope, the practice of "Koehler Illumination" should be understood and followed by every serious microscopist. Step-by-step instructions as well as illustrations of the beam path in an upright and inverted microscope are included in this chapter. A few practical considerations are listed in Section 3. Copyright © 2013 Elsevier Inc. All rights

The SUPERBLINK catalog of stars with large proper motions, with enhancements from the first GAIA release.

Science.gov (United States)

Lepine, Sebastien

2018-01-01

The SUPERBLINK survey of stars with proper motion larger than 40 mas/yr is now complete for the entire sky down to magnitude V=20. The SUPERBLINK catalog provides astrometric and photometric data for a little over 2.7 million individual stars, and identifies their counterparts in a variety of large catalogs including ROSAT in the X-ray, GALEX in the ultraviolet, GAIA and SDSS in the optical, and 2MASS and WISE in the infrared. The addition of GAIA data notably yields proper motions to an accuracy of ~2mas/yr for 94% of the entries. Parallaxes with accuracies better than 10% are also now available for about 155,000 of these stars. Besides from identifying local populations of low-mass stars and white dwarfs, the catalog nows begins to map out with some detail the distribution in velocity space of various local stellar populations, including young M dwarfs and old metal-poor M subdwarfs. The catalog also allows one to search for common proper motion pairs, and other kinematic groups like nearby cluster members, moving group members, and local streams. This demonstrates the potential for nearby star research as more complete data becomes available from the GAIA mission.

Swinging control of two-pendulum system under energy constraints

NARCIS (Netherlands)

Ananyevskiy, M.S.; Fradkov, A.L.; Nijmeijer, H.; Leonov, G.; Nijmeijer, H.; Pogromsky, A.; Fradkov, A.

2009-01-01

A method for control of mechanical systems under phase constraints, applicable to energy control of Hamiltonian systems is proposed. The constrained energy control problem for two pendulums by a single control action is studied both analytically and numerically. It is shown that for a proper choice

Transforming paper-based assessment forms to a digital format: Exemplified by the Housing Enabler prototype app.

Science.gov (United States)

Svarre, Tanja; Lunn, Tine Bieber Kirkegaard; Helle, Tina

2017-11-01

The aim of this paper is to provide the reader with an overall impression of the stepwise user-centred design approach including the specific methods used and lessons learned when transforming paper-based assessment forms into a prototype app, taking the Housing Enabler as an example. Four design iterations were performed, building on a domain study, workshops, expert evaluation and controlled and realistic usability tests. The user-centred design process involved purposefully selected participants with different Housing Enabler knowledge and housing adaptation experience. The design iterations resulted in the development of a Housing Enabler prototype app. The prototype app has several features and options that are new compared with the original paper-based Housing Enabler assessment form. These new features include a user friendly overview of the assessment form; easy navigation by swiping back and forth between items; onsite data analysis; and ranking of the accessibility score, photo documentation and a data export facility. Based on the presented stepwise approach, a high-fidelity Housing Enabler prototype app was successfully developed. The development process has emphasized the importance of combining design participants' knowledge and experiences, and has shown that methods should seem relevant to participants to increase their engagement.

Fault Tolerance Automotive Air-Ratio Control Using Extreme Learning Machine Model Predictive Controller

OpenAIRE

Pak Kin Wong; Hang Cheong Wong; Chi Man Vong; Tong Meng Iong; Ka In Wong; Xianghui Gao

2015-01-01

Effective air-ratio control is desirable to maintain the best engine performance. However, traditional air-ratio control assumes the lambda sensor located at the tail pipe works properly and relies strongly on the air-ratio feedback signal measured by the lambda sensor. When the sensor is warming up during cold start or under failure, the traditional air-ratio control no longer works. To address this issue, this paper utilizes an advanced modelling technique, kernel extreme learning machine (...

Social-ecological enabling conditions for payments for ecosystem services

OpenAIRE

Heidi R. Huber-Stearns; Drew E. Bennett; Stephen Posner; Ryan C. Richards; Jenn Hoyle. Fair; Stella J. M. Cousins; Chelsie L. Romulo

2017-01-01

The concept of "enabling conditions" centers on conditions that facilitate approaches to addressing social and ecological challenges. Although multiple fields have independently addressed the concept of enabling conditions, the literature lacks a shared understanding or integration of concepts. We propose a more synthesized understanding of enabling conditions beyond disciplinary boundaries by focusing on the enabling conditions that influence the implementation of a range of environmental p...

Nanomaterial-Enabled Wearable Sensors for Healthcare.

Science.gov (United States)

Yao, Shanshan; Swetha, Puchakayala; Zhu, Yong

2018-01-01

Highly sensitive wearable sensors that can be conformably attached to human skin or integrated with textiles to monitor the physiological parameters of human body or the surrounding environment have garnered tremendous interest. Owing to the large surface area and outstanding material properties, nanomaterials are promising building blocks for wearable sensors. Recent advances in the nanomaterial-enabled wearable sensors including temperature, electrophysiological, strain, tactile, electrochemical, and environmental sensors are presented in this review. Integration of multiple sensors for multimodal sensing and integration with other components into wearable systems are summarized. Representative applications of nanomaterial-enabled wearable sensors for healthcare, including continuous health monitoring, daily and sports activity tracking, and multifunctional electronic skin are highlighted. Finally, challenges, opportunities, and future perspectives in the field of nanomaterial-enabled wearable sensors are discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

On the security of SSL/TLS-enabled applications

Directory of Open Access Journals (Sweden)

Manik Lal Das

2014-01-01

Full Text Available SSL/TLS (Secure Socket Layer/Transport Layer Security-enabled web applications aim to provide public key certificate based authentication, secure session key establishment, and symmetric key based traffic confidentiality. A large number of electronic commerce applications, such as stock trading, banking, shopping, and gaming rely on the security strength of the SSL/TLS protocol. In recent times, a potential threat, known as main-in-the-middle (MITM attack, has been exploited by attackers of SSL/TLS-enabled web applications, particularly when naive users want to connect to an SSL/TLS-enabled web server. In this paper, we discuss about the MITM threat to SSL/TLS-enabled web applications. We review the existing space of solutions to counter the MITM attack on SSL/TLS-enabled applications, and then, we provide an effective solution which can resist the MITM attack on SSL/TLS-enabled applications. The proposed solution uses a soft-token based approach for user authentication on top of the SSL/TLS’s security features. We show that the proposed solution is secure, efficient and user friendly in comparison to other similar approaches.

Triggering sporulation in Bacillus subtilis with artificial two-component systems reveals the importance of proper Spo0A activation dynamics.

Science.gov (United States)

Vishnoi, Monika; Narula, Jatin; Devi, Seram Nganbiton; Dao, Hoang-Anh; Igoshin, Oleg A; Fujita, Masaya

2013-10-01

Sporulation initiation in Bacillus subtilis is controlled by the phosphorylated form of the master regulator Spo0A which controls transcription of a multitude of sporulation genes. In this study, we investigated the importance of temporal dynamics of phosphorylated Spo0A (Spo0A∼P) accumulation by rewiring the network controlling its phosphorylation. We showed that simultaneous induction of KinC, a kinase that can directly phosphorylate Spo0A, and Spo0A itself from separately controlled inducible promoters can efficiently trigger sporulation even under nutrient rich conditions. However, the sporulation efficiency in this artificial two-component system was significantly impaired when KinC and/or Spo0A induction was too high. Using mathematical modelling, we showed that gradual accumulation of Spo0A∼P is essential for the proper temporal order of the Spo0A regulon expression, and that reduction in sporulation efficiency results from the reversal of that order. These insights led us to identify premature repression of DivIVA as one possible explanation for the adverse effects of accelerated accumulation of Spo0A∼P on sporulation. Moreover, we found that positive feedback resulting from autoregulation of the native spo0A promoter leads to robust control of Spo0A∼P accumulation kinetics. Thus we propose that a major function of the conserved architecture of the sporulation network is controlling Spo0A activation dynamics. © 2013 John Wiley & Sons Ltd.

Integrated Photonics Enabled by Slow Light

DEFF Research Database (Denmark)

Mørk, Jesper; Chen, Yuntian; Ek, Sara

2012-01-01

In this talk we will discuss the physics of slow light in semiconductor materials and in particular the possibilities offered for integrated photonics. This includes ultra-compact slow light enabled optical amplifiers, lasers and pulse sources.......In this talk we will discuss the physics of slow light in semiconductor materials and in particular the possibilities offered for integrated photonics. This includes ultra-compact slow light enabled optical amplifiers, lasers and pulse sources....

Stem cell plasticity enables hair regeneration following Lgr5+ cell loss.

Science.gov (United States)

Hoeck, Joerg D; Biehs, Brian; Kurtova, Antonina V; Kljavin, Noelyn M; de Sousa E Melo, Felipe; Alicke, Bruno; Koeppen, Hartmut; Modrusan, Zora; Piskol, Robert; de Sauvage, Frederic J

2017-06-01

Under injury conditions, dedicated stem cell populations govern tissue regeneration. However, the molecular mechanisms that induce stem cell regeneration and enable plasticity are poorly understood. Here, we investigate stem cell recovery in the context of the hair follicle to understand how two molecularly distinct stem cell populations are integrated. Utilizing diphtheria-toxin-mediated cell ablation of Lgr5 + (leucine-rich repeat-containing G-protein-coupled receptor 5) stem cells, we show that killing of Lgr5 + cells in mice abrogates hair regeneration but this is reversible. During recovery, CD34 + (CD34 antigen) stem cells activate inflammatory response programs and start dividing. Pharmacological attenuation of inflammation inhibits CD34 + cell proliferation. Subsequently, the Wnt pathway controls the recovery of Lgr5 + cells and inhibition of Wnt signalling prevents Lgr5 + cell and hair germ recovery. Thus, our study uncovers a compensatory relationship between two stem cell populations and the underlying molecular mechanisms that enable hair follicle regeneration.

Malavefes: A computational voice-enabled malaria fuzzy informatics software for correct dosage prescription of anti-malarial drugs

Directory of Open Access Journals (Sweden)

Olugbenga O. Oluwagbemi

2018-04-01

Full Text Available Malaria is one of the infectious diseases consistently inherent in many Sub-Sahara African countries. Among the issues of concern are the consequences of wrong diagnosis and dosage administration of anti-malarial drugs on sick patients; these have resulted into various degrees of complications ranging from severe headaches, stomach and body discomfort, blurred vision, dizziness, hallucinations, and in extreme cases, death. Many expert systems have been developed to support different infectious disease diagnoses, but not sure of any yet, that have been specifically designed as a voice-based application to diagnose and translate malaria patients’ symptomatic data for pre-laboratory screening and correct prescription of proper dosage of the appropriate medication. We developed Malavefes, (a malaria voice-enabled computational fuzzy expert system for correct dosage prescription of anti-malarial drugs using Visual Basic.NET., and Java programming languages. Data collation for this research was conducted by survey from existing literature and interview from public health experts. The database for this malaria drug informatics system was implemented using Microsoft Access. The Root Sum Square (RSS was implemented as the inference engine of Malavefes to make inferences from rules, while Centre of Gravity (CoG was implemented as the defuzzification engine. The drug recommendation module was voice-enabled. Additional anti-malaria drug expiration validation software was developed using Java programming language. We conducted a user-evaluation of the performance and user-experience of the Malavefes software. Keywords: Informatics, Bioinformatics, Fuzzy, Anti-malaria, Voice computing, Dosage prescription

A framework provided an outline toward the proper evaluation of potential screening strategies.

Science.gov (United States)

Adriaensen, Wim J; Matheï, Cathy; Buntinx, Frank J; Arbyn, Marc

2013-06-01

Screening tests are often introduced into clinical practice without proper evaluation, despite the increasing awareness that screening is a double-edged sword that can lead to either net benefits or harms. Our objective was to develop a comprehensive framework for the evaluation of new screening strategies. Elaborating on the existing concepts proposed by experts, a stepwise framework is proposed to evaluate whether a potential screening test can be introduced as a screening strategy into clinical practice. The principle of screening strategy evaluation is illustrated for cervical cancer, which is a template for screening because of the existence of an easily detectable and treatable precursor lesion. The evaluation procedure consists of six consecutive steps. In steps 1-4, the technical accuracy, place of the test in the screening pathway, diagnostic accuracy, and longitudinal sensitivity and specificity of the screening test are assessed. In steps 5 and 6, the impact of the screening strategy on the patient and population levels, respectively, is evaluated. The framework incorporates a harm and benefit trade-off and cost-effectiveness analysis. Our framework provides an outline toward the proper evaluation of potential screening strategies before considering implementation. Copyright © 2013 Elsevier Inc. All rights reserved.

Kinematics of Local, High-Velocity K dwarfs in the SUPERBLINK Proper Motion Catalog

Science.gov (United States)

Kim, Bokyoung; Lepine, Sebastien

2018-01-01

We present a study of the kinematics of 345,480 K stars within 2 kpc of the Sun, based on data from the SUPERBLINK catalog of stars with high proper motions (> 40 mas/yr), combined with data from the 2MASS survey and from the first GAIA release, which together yields proper motions accurate to ~2 mas/yr. All K dwarfs were selected based on their G-K colors, and photometric distances were estimated from a re-calibrated color-magnitude relationship for K dwarfs. We plot transverse velocities VT in various directions on the sky, to examine the local distribution of K dwarfs in velocity space. We have also obtained radial velocity information for a subsample of 10,128 stars, from RAVE and SDSS DR12, which we use to construct spatial velocity (U, V, W) plots. About a third (123,350) of the stars are high-velocity K dwarfs, with motions consistent with the local Galactic halo population. Our kinematic analysis suggests that their velocity-space distribution is very uniform, and we find no evidence of substructure that might arise, e.g., from local streams or moving groups.

Topoisomerase IIbeta is required for proper retinal development and survival of postmitotic cells

Directory of Open Access Journals (Sweden)

Ying Li

2014-01-01

Topoisomerase IIbeta (Top2b is an enzyme that modulates DNA supercoiling by catalyzing the passage of DNA duplexes through one another. It is ubiquitously expressed in postmitotic cells and known to function during the development of neuromuscular junctions in the diaphragm and the proper formation of laminar structure in the cerebral cortex. However, due to the perinatal death phenotype of the traditional constitutive and brain-specific Top2b knockout mice, the precise in vivo function of Top2b, especially during postnatal neural development, remains to be determined. Using both the constitutive and retina-specific knockout mouse models, we showed that Top2b deficiency resulted in delayed neuronal differentiation, degeneration of the plexiform layers and outer segment of photoreceptors, as well as dramatic reduction in cell number in the retina. Genome-wide transcriptome analysis by RNA sequencing revealed that genes involved in neuronal survival and neural system development were preferentially affected in Top2b-deficient retinas. Collectively, our findings have indicated an important function of Top2b in proper development and the maintenance/survival of postmitotic neurons in the retina.

Translation of proper names in the novel «Hunger games» by S. Collins

Directory of Open Access Journals (Sweden)

Zalesova N. M.

2016-05-01

Full Text Available the aim of the article is to study the methods used when translating proper names in the fantasy novel «Hunger games» by S. Collins. It was found out that the most popular ones are transcription, translation with the use of the traditional variant and semantic translation.

Euclidean null controllability of linear systems with delays in state ...

African Journals Online (AJOL)

Sufficient conditions are developed for the Euclidean controllability of linear systems with delay in state and in control. Namely, if the uncontrolled system is uniformly asymptotically stable and the control equation proper, then the control system is Euclidean null controllable. Journal of the Nigerian Association of ...

Co-production of acetone and ethanol with molar ratio control enables production of improved gasoline or jet fuel blends.

Science.gov (United States)

Baer, Zachary C; Bormann, Sebastian; Sreekumar, Sanil; Grippo, Adam; Toste, F Dean; Blanch, Harvey W; Clark, Douglas S

2016-10-01

The fermentation of simple sugars to ethanol has been the most successful biofuel process to displace fossil fuel consumption worldwide thus far. However, the physical properties of ethanol and automotive components limit its application in most cases to 10-15 vol% blends with conventional gasoline. Fermentative co-production of ethanol and acetone coupled with a catalytic alkylation reaction could enable the production of gasoline blendstocks enriched in higher-chain oxygenates. Here we demonstrate a synthetic pathway for the production of acetone through the mevalonate precursor hydroxymethylglutaryl-CoA. Expression of this pathway in various strains of Escherichia coli resulted in the co-production of acetone and ethanol. Metabolic engineering and control of the environmental conditions for microbial growth resulted in controllable acetone and ethanol production with ethanol:acetone molar ratios ranging from 0.7:1 to 10.0:1. Specifically, use of gluconic acid as a substrate increased production of acetone and balanced the redox state of the system, predictively reducing the molar ethanol:acetone ratio. Increases in ethanol production and the molar ethanol:acetone ratio were achieved by co-expression of the aldehyde/alcohol dehydrogenase (AdhE) from E. coli MG1655 and by co-expression of pyruvate decarboxylase (Pdc) and alcohol dehydrogenase (AdhB) from Z. mobilis. Controlling the fermentation aeration rate and pH in a bioreactor raised the acetone titer to 5.1 g L(-1) , similar to that obtained with wild-type Clostridium acetobutylicum. Optimizing the metabolic pathway, the selection of host strain, and the physiological conditions employed for host growth together improved acetone titers over 35-fold (0.14-5.1 g/L). Finally, chemical catalysis was used to upgrade the co-produced ethanol and acetone at both low and high molar ratios to higher-chain oxygenates for gasoline and jet fuel applications. Biotechnol. Bioeng. 2016;113: 2079-2087. © 2016 Wiley

Social-ecological enabling conditions for payments for ecosystem services

Directory of Open Access Journals (Sweden)

Heidi R. Huber-Stearns

2017-03-01

Full Text Available The concept of "enabling conditions" centers on conditions that facilitate approaches to addressing social and ecological challenges. Although multiple fields have independently addressed the concept of enabling conditions, the literature lacks a shared understanding or integration of concepts. We propose a more synthesized understanding of enabling conditions beyond disciplinary boundaries by focusing on the enabling conditions that influence the implementation of a range of environmental policies termed payments for ecosystem services (PES. Through an analysis of key literature from different disciplinary perspectives, we examined how researchers and practitioners refer to and identify enabling conditions within the context of PES. Through our synthesis, we identified 24 distinct enabling conditions organized within 4 broad themes: biophysical, economic, governance, and social-cultural conditions. We found that the literature coalesces around certain enabling conditions, such as strong ecosystem science and existing institutions, regardless of disciplinary background or journal audience. We also observed key differences in how authors perceive the direction of influence for property type, program objectives, and number of actors. Additionally, we noted an emphasis on the importance of the contextual nature of many enabling conditions that may cause certain conditions to have a disproportionate impact on successful implementation in some circumstances. Unraveling the relative importance of specific enabling conditions in diverse contexts remains a research frontier. Ultimately, no single disciplinary perspective is likely to provide all necessary insights for PES creation, and given the intertwined nature of enabling conditions, practitioners need to consider insights from multiple dimensions. Our work suggests opportunities to better connect diverse conversations through integration of concepts, a common vocabulary, and a synthetic framework.

Angiographic manifestation and transcatheter arterial embolization of proper esophageal artery in hemoptysis

International Nuclear Information System (INIS)

Jiang Sen; Zhu Xiaohua; Sun Xiwen; Zhi Wenxiang; Jie Bing; You Zhengqian; Yu Dong; Peng Gang

2008-01-01

Objective: To investigate the angiographic manifestation of the proper esophageal artery (PEA), the high risk factors for the presence of the anomalous PEA in hemoptysis and to evaluate the safety of transcatheter arterial embolization (TAE) of the PEA using gelatin sponge (GS). Methods: Selective esophageal arteriography was performed in forty-three patients with hemoptysis, including 15 cases of pulmonary tuberculosis, 18 cases of bronchiectasis, 7 cases of posttuberculous bronchiectasis and three cases of lung cancer. One case experienced failure of bronchial arterial embolization. The angiographic manifestation of the PEAs was studied. The complications of the procedure and clinical results were observed in the patients who underwent TAE using GS. Results: Thirty-nine PEAs were catheterized selectively in 37 patients (86.0%). Eighteen anomalous PEAs (46.2%) were catheterized selectively in 17 patients (45.9%). The anomalous PEAs showed tortuosity, dilatation, hyperplasia, shunting with pulmonary artery and anastomosis with the bronchial artery. All lesions involved basal segment of inferior pulmonary lobar. Bronchiectasis was the most frequent disease for PEA abnormality. No complications occurred and satisfactory curative effect was achieved with TAE of the anomalous PEAs. Conclusions: It is necessary to perform selective proper esophageal arteriography when the lesion involves basal segment of inferior pulmonary lobar in hemoptysis. Supplemental TAE of the anomalous PEA using GS is safe and valuable in the management of hemoptysis. (authors)

Barriers and enablers to physical activity participation in patients with COPD: a systematic review.

Science.gov (United States)

Thorpe, Olivia; Johnston, Kylie; Kumar, Saravana

2012-01-01

Physical activity (PA) has been shown to improve symptoms in people with chronic obstructive pulmonary disease (COPD). Despite the high health and financial costs, the uptake of management strategies, particularly participation in PA and pulmonary rehabilitation (PR), are low. The review objective here was to identify potential barriers and enablers, which people with COPD report being associated with their participation in PA programs, including PR. A systematic search was undertaken to identify studies (published Jan 2000 to Aug 2011) reporting any barriers and enablers experienced by people with COPD regarding participation in PA and PR. Methodological quality of the studies was appraised using McMaster critical appraisal tools. A narrative summary of findings was undertaken reporting on individual study characteristics, country of origin, participants, and potential barriers and enablers. Eleven studies (8 qualitative and 3 quantitative) met the inclusion criteria for this systematic review. Several methodological issues (small sampling, poor description of data collection and analysis, issues with generalizability of the research findings) were common among included studies. Barriers identified included changing health status, personal issues, lack of support, external factors, ongoing smoking, and program-specific barriers. Enablers identified included social support, professional support, personal drivers, personal benefit, control of condition, specific goals, and program-specific enablers. The findings from this review may assist health professionals, patients, care givers and the wider community to develop effective strategies to promote participation in PA and PR among people with COPD.

Secondary Control Scheme for Voltage Unbalance Compensation in an Islanded Droop-Controlled Microgrid

DEFF Research Database (Denmark)

Savaghebi, Mehdi; Jalilian, Alireza; Vasquez, Juan Carlos

2012-01-01

The concept of microgrid hierarchical control is presented recently. In this paper, a hierarchical scheme is proposed which includes primary and secondary control levels. The primary level comprises distributed generators (DGs) local controllers. The local controllers mainly consist of power......, voltage and current controllers, and virtual impedance control loop. The central secondary controller is designed to manage the compensation of voltage unbalance at the point of common coupling (PCC) in an islanded microgrid. Unbalance compensation is achieved by sending proper control signals to the DGs...... local controllers. The design procedure of the control system is discussed in detail and the simulation results are presented. The results show the effectiveness of the proposed control structure in compensating the voltage unbalance....

A computational formalization for partial evaluation

DEFF Research Database (Denmark)

Hatcliff, John; Danvy, Olivier

1997-01-01

We formalize a partial evaluator for Eugenio Moggi's computational metalanguage. This formalization gives an evaluation-order independent view of binding-time analysis and program specialization, including a proper treatment of call unfolding. It also enables us to express the essence of `control...

Information Management Workflow and Tools Enabling Multiscale Modeling Within ICME Paradigm

Science.gov (United States)

Arnold, Steven M.; Bednarcyk, Brett A.; Austin, Nic; Terentjev, Igor; Cebon, Dave; Marsden, Will

2016-01-01

With the increased emphasis on reducing the cost and time to market of new materials, the need for analytical tools that enable the virtual design and optimization of materials throughout their processing - internal structure - property - performance envelope, along with the capturing and storing of the associated material and model information across its lifecycle, has become critical. This need is also fueled by the demands for higher efficiency in material testing; consistency, quality and traceability of data; product design; engineering analysis; as well as control of access to proprietary or sensitive information. Fortunately, material information management systems and physics-based multiscale modeling methods have kept pace with the growing user demands. Herein, recent efforts to establish workflow for and demonstrate a unique set of web application tools for linking NASA GRC's Integrated Computational Materials Engineering (ICME) Granta MI database schema and NASA GRC's Integrated multiscale Micromechanics Analysis Code (ImMAC) software toolset are presented. The goal is to enable seamless coupling between both test data and simulation data, which is captured and tracked automatically within Granta MI®, with full model pedigree information. These tools, and this type of linkage, are foundational to realizing the full potential of ICME, in which materials processing, microstructure, properties, and performance are coupled to enable application-driven design and optimization of materials and structures.

How Students Learn from Multiple Contexts and Definitions: Proper Time as a Coordination Class

Science.gov (United States)

Levrini, Olivia; diSessa, Andrea A.

2008-01-01

This article provides an empirical analysis of a single classroom episode in which students reveal difficulties with the concept of proper time in special relativity but slowly make progress in improving their understanding. The theoretical framework used is "coordination class theory," which is an evolving model of concepts and conceptual change.…

A Dung Beetle-like Leg and its Adaptive Neural Control

DEFF Research Database (Denmark)

Di Canio, Giuliano; Stoyanov, Stoyan; Larsen, Jørgen Christian

2016-01-01

Dung beetles show fascinating locomotion abilities. They can use their legs to not only walk but also manipulate objects. Furthermore, they can perform their leg movements at a proper frequency with respect to their biomechanical properties and quickly adapt the movements to deal with external pe...... also apply adaptive neural control, based on a central pattern generator (CPG) circuit with synaptic plasticity, to autonomously generate a proper stepping frequency of the leg. The controller can also adapt the leg movement to deal with external perturbations within a few steps....

EROS 2 proper motion survey a field brown dwarf and an L dwarf companion to LHS 102

CERN Document Server

Goldman, B; Forveille, T; Afonso, C; Alard, C; Albert, J N; Andersen, J; Ansari, R; Aubourg, E; Bareyre, P; Bauer, F; Beaulieu, J P; Borsenberger, J; Bouquet, A; Char, S; Charlot, X; Couchot, F; Coutures, C; Derue, F; Ferlet, R; Fouqué, P; Glicenstein, J F; Gould, A; Graff, D S; Gros, M H; Haïssinski, J; Hamilton, J C; Hardin, D P; De Kat, J; Kim, A; Lasserre, T; Lesquoy, E; Loup, C; Magneville, C; Mansoux, B; Marquette, J B; Martín, E L; Maurice, E; Milshtein, A I; Moniez, M; Palanque-Delabrouille, Nathalie; Perdereau, O; Prévôt, L; Regnault, N; Rich, J; Spiro, Michel; Vidal-Madjar, A; Virgoux, L; Zylberajch, S

1999-01-01

We report the discovery of two L dwarfs (the new spectral class defined for dwarfs cooler than the M type) in a two-epoch CCD proper motion survey of 413 square degrees, complemented by infrared photometry from DENIS. One of them has a strong lithium line and is therefore a brown dwarf. The other is a common proper motion companion to the mid-M dwarf LHS 102 (GJ 1001), which has a well determined trigonometric parallax. LHS 102B is thus the coolest L dwarf of known distance and luminosity. Its infrared absolute photometry are very well reproduced by the Allard et al DUSTY models.

Developing performance measurement systems as enabling formalization : A longitudinal field study of a logistics department

NARCIS (Netherlands)

Wouters, Marc; Wilderom, Celeste P.M.

2008-01-01

This paper reports on a developmental approach to performance-measurement systems (PMS). In particular, we look at characteristics of a development process that result in the PMS being perceived by employees as enabling of their work, rather than as primarily a control device for use by senior

Creativity and Innovation in Health Care: Tapping Into Organizational Enablers Through Human-Centered Design.

Science.gov (United States)

Zuber, Christi Dining; Moody, Louise

There is an increasing drive in health care for creativity and innovation to tackle key health challenges, improve quality and access, and reduce harm and costs. Human-centered design (HCD) is a potential approach to achieving organizational innovation. However, research suggests the nursing workforce feels unsupported to take the risks needed for innovation, and leaders may not understand the conditions required to fully support them. The aim of this study was to identify enabling conditions that support frontline nurses in their attempts to behave as champions of innovation and change. An HCD workshop was undertaken with 125 nurses employed in clinical practice at Kaiser Permanente. The workshop included empathy mapping and semistructured questions that probed participant experiences with innovation and change. The data were collated and thematic analysis undertaken through a Grounded Theory approach. The data were analyzed to identify key enabling conditions. Seven enablers emerged: personal need for a solution; challenges that have meaningful purpose; clarity of goal and control of resources; active experimentation; experiences indicating progress; positive encouragement and confidence; and provision of psychological safety. These enablers were then translated into pragmatic guidelines for leaders on how the tools of HCD may be leveraged for innovation and change in health care.

Iterative algorithms for the input and state recovery from the approximate inverse of strictly proper multivariable systems

Science.gov (United States)

Chen, Liwen; Xu, Qiang

2018-02-01

This paper proposes new iterative algorithms for the unknown input and state recovery from the system outputs using an approximate inverse of the strictly proper linear time-invariant (LTI) multivariable system. One of the unique advantages from previous system inverse algorithms is that the output differentiation is not required. The approximate system inverse is stable due to the systematic optimal design of a dummy feedthrough D matrix in the state-space model via the feedback stabilization. The optimal design procedure avoids trial and error to identify such a D matrix which saves tremendous amount of efforts. From the derived and proved convergence criteria, such an optimal D matrix also guarantees the convergence of algorithms. Illustrative examples show significant improvement of the reference input signal tracking by the algorithms and optimal D design over non-iterative counterparts on controllable or stabilizable LTI systems, respectively. Case studies of two Boeing-767 aircraft aerodynamic models further demonstrate the capability of the proposed methods.

VizieR Online Data Catalog: Velocities and proper motions of Galactic Cepheids (Mel'nik+, 2015)

Science.gov (United States)

Mel'Nik, A. M.; Rautiainen, P.; Berdnikov, L. N.; Dambis, A. K.; Rastorguev, A. S.

2015-01-01

For every classical Cepheid we give its designation in the General Catalog of Variable Stars (GCVS) (Samus at al., 2007, Cat. B/gcvs) or in the All Sky Automated Survey (ASAS) (Pojmanski 2002, II/264), its type (see GCVS description), fundamental period PF, intensity-mean V-band magnitude , J2000 equatorial coordinates, Galactic coordinates l and b, and heliocentric distance r. Table 1 also gives the Cepheid line-of-sight velocities Vr (the so-called γ-velocities), their uncertainties e_Vr and the references (1-6) to the sources from which they are taken. The proper motions of Cepheids were adopted from the new reduction of Hipparcos data (ESA 1997, Cat. I/239) by van Leeuwen (2007, Cat. I/311). Table 1 presents proper motions pml and pmb, their uncertainties e_pml and e_pmb and the corresponding Hipparcos catalog number HIP. (1 data file).

People avoid situations that enable them to deceive others

NARCIS (Netherlands)

Shalvi, S.; Handgraaf, M.J.J.; de Dreu, C.K.W.

2011-01-01

Information advantage enables people to benefit themselves by deceiving their counterparts. Using a modified ultimatum bargaining game with an exit option, we find that people are more likely to avoid settings enabling them to privately deceive their counterparts than settings which do not enable

Control Design of a Nonlinear Controller to Stabilize the Nonlinear ...

African Journals Online (AJOL)

inyangs

protocol employed to combat the problem of proper queue utilization, busty packet drop and adaptable delay. TCP .... This case considers a delay on the control input only and the link capacity is made to be very large to ... We take the derivative of equation (13) with respect to t and apply the Leibniz integrator rule to obtain.

Rho-associated kinase activity is required for proper morphogenesis of the inner cell mass in the mouse blastocyst.

Science.gov (United States)

Laeno, Arlene May A; Tamashiro, Dana Ann A; Alarcon, Vernadeth B

2013-11-01

The blastocyst consists of the outer layer of trophectoderm and pluripotent inner cell mass (ICM), the precursor of the placenta and fetus, respectively. During blastocyst expansion, the ICM adopts a compact, ovoidal shape, whose proper morphology is crucial for normal embryogenesis. Rho-associated kinase (ROCK), an effector of small GTPase RHO signaling, mediates the diverse cellular processes of morphogenesis, but its role in ICM morphogenesis is unclear. Here, we demonstrate that ROCK is required for cohesion of ICM cells and formation of segregated tissues called primitive endoderm (PrE) and epiblast (Epi) in the ICM of the mouse blastocyst. Blastocyst treatment with ROCK inhibitors Y-27632 and Fasudil caused widening or spreading of the ICM, and intermingling of PrE and Epi. Widening of ICM was independent of trophectoderm because isolated ICMs as well as colonies of mouse embryonic stem cells (mESC) also spread upon Y-27632 treatment. PrE, Epi, and trophectoderm cell numbers were similar between control and treated blastocysts, suggesting that ROCK inhibition affected ICM morphology but not lineage differentiation. Rock1 and Rock2 knockdown via RNA interference in mESC also induced spreading, supporting the conclusion that morphological defects caused by the pharmacological inhibitors were due to ROCK inactivation. When blastocysts were transferred into surrogates, implantation efficiencies were unaffected by ROCK inhibition, but treated blastocysts yielded greater fetal loss. These results show that proper ICM morphology is dependent on ROCK activity and is crucial for fetal development. Our studies have wider implication for improving efficiencies of human assisted reproductive technologies that diminish pregnancy loss and promote successful births.

Activity and Kinematics of White Dwarf-M Dwarf Binaries from the SUPERBLINK Proper Motion Survey

International Nuclear Information System (INIS)

Skinner, Julie N.; Morgan, Dylan P.; West, Andrew A.; Lépine, Sébastien; Thorstensen, John R.

2017-01-01

We present an activity and kinematic analysis of high proper motion white dwarf-M dwarf binaries (WD+dMs) found in the SUPERBLINK survey, 178 of which are new identifications. To identify WD+dMs, we developed a UV–optical–IR color criterion and conducted a spectroscopic survey to confirm each candidate binary. For the newly identified systems, we fit the two components using model white dwarf spectra and M dwarf template spectra to determine physical parameters. We use H α chromospheric emission to examine the magnetic activity of the M dwarf in each system, and investigate how its activity is affected by the presence of a white dwarf companion. We find that the fraction of WD+dM binaries with active M dwarfs is significantly higher than their single M dwarf counterparts at early and mid-spectral types. We corroborate previous studies that find high activity fractions at both close and intermediate separations. At more distant separations, the binary fraction appears to approach the activity fraction for single M dwarfs. Using derived radial velocities and the proper motions, we calculate 3D space velocities for the WD+dMs in SUPERBLINK. For the entire SUPERBLINK WD+dMs, we find a large vertical velocity dispersion, indicating a dynamically hotter population compared to high proper motion samples of single M dwarfs. We compare the kinematics for systems with active M dwarfs and those with inactive M dwarfs, and find signatures of asymmetric drift in the inactive sample, indicating that they are drawn from an older population.

Activity and Kinematics of White Dwarf-M Dwarf Binaries from the SUPERBLINK Proper Motion Survey

Energy Technology Data Exchange (ETDEWEB)

Skinner, Julie N. [Institute for Astrophysical Research, Boston University, 725 Commonwealth Avenue, Boston, MA 02215 (United States); Morgan, Dylan P.; West, Andrew A. [Department of Astronomy, Boston University, 725 Commonwealth Avenue, Boston, MA 02215 (United States); Lépine, Sébastien [Department of Physics and Astronomy, Georgia State University, 25 Park Place NE, Atlanta, GA, 30303 (United States); Thorstensen, John R., E-mail: jskinner@bu.edu [Department of Physics and Astronomy, 6127 Wilder Laboratory, Dartmouth College, Hanover, NH 03755 (United States)

2017-09-01

We present an activity and kinematic analysis of high proper motion white dwarf-M dwarf binaries (WD+dMs) found in the SUPERBLINK survey, 178 of which are new identifications. To identify WD+dMs, we developed a UV–optical–IR color criterion and conducted a spectroscopic survey to confirm each candidate binary. For the newly identified systems, we fit the two components using model white dwarf spectra and M dwarf template spectra to determine physical parameters. We use H α chromospheric emission to examine the magnetic activity of the M dwarf in each system, and investigate how its activity is affected by the presence of a white dwarf companion. We find that the fraction of WD+dM binaries with active M dwarfs is significantly higher than their single M dwarf counterparts at early and mid-spectral types. We corroborate previous studies that find high activity fractions at both close and intermediate separations. At more distant separations, the binary fraction appears to approach the activity fraction for single M dwarfs. Using derived radial velocities and the proper motions, we calculate 3D space velocities for the WD+dMs in SUPERBLINK. For the entire SUPERBLINK WD+dMs, we find a large vertical velocity dispersion, indicating a dynamically hotter population compared to high proper motion samples of single M dwarfs. We compare the kinematics for systems with active M dwarfs and those with inactive M dwarfs, and find signatures of asymmetric drift in the inactive sample, indicating that they are drawn from an older population.

Thermodynamic Vent System for an On-Orbit Cryogenic Reaction Control Engine

Science.gov (United States)

Hurlbert, Eric A.; Romig, Kris A.; Jimenez, Rafael; Flores, Sam

2012-01-01

A report discusses a cryogenic reaction control system (RCS) that integrates a Joule-Thompson (JT) device (expansion valve) and thermodynamic vent system (TVS) with a cryogenic distribution system to allow fine control of the propellant quality (subcooled liquid) during operation of the device. It enables zero-venting when coupled with an RCS engine. The proper attachment locations and sizing of the orifice are required with the propellant distribution line to facilitate line conditioning. During operations, system instrumentation was strategically installed along the distribution/TVS line assembly, and temperature control bands were identified. A sub-scale run tank, full-scale distribution line, open-loop TVS, and a combination of procured and custom-fabricated cryogenic components were used in the cryogenic RCS build-up. Simulated on-orbit activation and thruster firing profiles were performed to quantify system heat gain and evaluate the TVS s capability to maintain the required propellant conditions at the inlet to the engine valves. Test data determined that a small control valve, such as a piezoelectric, is optimal to provide continuously the required thermal control. The data obtained from testing has also assisted with the development of fluid and thermal models of an RCS to refine integrated cryogenic propulsion system designs. This system allows a liquid oxygenbased main propulsion and reaction control system for a spacecraft, which improves performance, safety, and cost over conventional hypergolic systems due to higher performance, use of nontoxic propellants, potential for integration with life support and power subsystems, and compatibility with in-situ produced propellants.

Control of mechnical systems with constraints: two pendulums case study

NARCIS (Netherlands)

Anayevskiy, M.S.; Fradkov, A.L.; Nijmeijer, H.; Cho, Hyungsuck

2008-01-01

A method for control of mechanical systems under phase constraints, applicable to energy control of Hamiltonian systems is proposed. The constrained energy control problem for two pendulums by a single control action is studied both analytically and numerically. It is shown that for a proper choice

Global stabilisation of large-scale hydraulic networks with quantised and positive proportional controls

DEFF Research Database (Denmark)

Jensen, Tom Nørgaard; Wisniewski, Rafal

2013-01-01

a set of decentralised, logarithmic quantised and constrained control actions with properly designed quantisation parameters. That is, an attractor set with a compact basin of attraction exists. Subsequently, the basin can be increased by increasing the control gains. In our work, this result...... is extended by showing that an attractor set with a global basin of attraction exists for arbitrary values of positive control gains, given that the upper level of the quantiser is properly designed. Furthermore, the proof is given for general monotone quantisation maps. Since the basin of attraction...

Physician communication via Internet-enabled technology: A systematic review.

Science.gov (United States)

Barr, Neil G; Randall, Glen E; Archer, Norman P; Musson, David M

2017-10-01

The use of Internet-enabled technology (information and communication technology such as smartphone applications) may enrich information exchange among providers and, consequently, improve health care delivery. The purpose of this systematic review was to gain a greater understanding of the role that Internet-enabled technology plays in enhancing communication among physicians. Studies were identified through a search in three electronic platforms: the Association for Computing Machinery Digital Library, ProQuest, and Web of Science. The search identified 5140 articles; of these, 21 met all inclusion criteria. In general, physicians were satisfied with Internet-enabled technology, but consensus was lacking regarding whether Internet-enabled technology improved efficiency or made a difference to clinical decision-making. Internet-enabled technology can play an important role in enhancing communication among physicians, but the extent of that benefit is influenced by (1) the impact of Internet-enabled technology on existing work practices, (2) the availability of adequate resources, and (3) the nature of institutional elements, such as privacy legislation.

Experimental study on frosting control of mobile air conditioning system with microchannel evaporator

International Nuclear Information System (INIS)

Qu Xiaohua; Shi Junye; Qi Zhaogang; Chen Jiangping

2011-01-01

In this paper, a newly developed frost control system is proposed. System bench tests and vehicle test in wind tunnel have been carried out to explore the anti-frosting performance of automotive air conditioning system with microchannel evaporator. The experimental results are compared with the baseline conventional laminated evaporator system. The test results show that the installation position of temperature sensor can dramatically affect the anti-frosting performance. The clutch switching on/off temperature range of the microchannel evaporator is also experimentally studied. The test results show that, with a proper installation position and on/off temperature range, the system COP can be improved, and meanwhile the panel vents' air off temperature can be reduced, and temperature swing can be reduced. - Highlights: → The frost control systems were tested with microchannel and laminated evaporators separately. → The installation position of temperature sensor affects the anti-frosting performance. → Temperature control range affects the anti-frosting performance. → The panel vents' air off temperature and swing can be reduced by proper control parameters. → The system COP can be improved by proper control parameters.

Proteomics enabled Vaccinology. Probing Antigen and Epitope Repertoires

NARCIS (Netherlands)

Mommen, G.P.M.

2014-01-01

The immune system is a complex system of molecules, cells, tissues and organs that protects higher organisms from pathogens or cancerous cells. A proper understanding of the immune system is vital for the development of new vaccines against infectious diseases or immunotherapies against cancer. Mass

Proper Motions of Dwarf Spheroidal Galaxies from Hubble Space Telescope Imaging. V. Final Measurement for Fornax

Science.gov (United States)

Piatek, Slawomir; Pryor, Carlton; Bristow, Paul; Olszewski, Edward W.; Harris, Hugh C.; Mateo, Mario; Minniti, Dante; Tinney, Christopher G.

2007-03-01

The measured proper motion of Fornax, expressed in the equatorial coordinate system, is (μα,μδ)=(47.6+/-4.6,-36.0+/-4.1) mas century-1. This proper motion is a weighted mean of four independent measurements for three distinct fields. Each measurement uses a quasi-stellar object as a reference point. Removing the contribution of the motion of the Sun and of the local standard of rest to the measured proper motion produces a Galactic rest-frame proper motion of (μGrfα,μGrfδ)=(24.4+/-4.6,-14.3+/-4.1) mas century-1. The implied space velocity with respect to the Galactic center has a radial component of Vr=-31.8+/-1.7 km s-1 and a tangential component of Vt=196+/-29 km s-1. Integrating the motion of Fornax in a realistic potential for the Milky Way produces orbital elements. The perigalacticon and apogalacticon are 118 (66, 137) and 152 (144, 242) kpc, respectively, where the values in the parentheses represent the 95% confidence intervals derived from Monte Carlo experiments. The eccentricity of the orbit is 0.13 (0.11, 0.38), and the orbital period is 3.2 (2.5, 4.6) Gyr. The orbit is retrograde and inclined by 101° (94°, 107°) to the Galactic plane. Fornax could be a member of a proposed ``stream'' of galaxies and globular clusters; however, the membership of another proposed galaxy in the stream, Sculptor, has been previously ruled out. Fornax is in the Kroupa-Theis-Boily plane, which contains 11 of the Galactic satellite galaxies, but its orbit will take it out of that plane. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26555.

Internet-enabled collaborative agent-based supply chains

Science.gov (United States)

Shen, Weiming; Kremer, Rob; Norrie, Douglas H.

2000-12-01

This paper presents some results of our recent research work related to the development of a new Collaborative Agent System Architecture (CASA) and an Infrastructure for Collaborative Agent Systems (ICAS). Initially being proposed as a general architecture for Internet based collaborative agent systems (particularly complex industrial collaborative agent systems), the proposed architecture is very suitable for managing the Internet enabled complex supply chain for a large manufacturing enterprise. The general collaborative agent system architecture with the basic communication and cooperation services, domain independent components, prototypes and mechanisms are described. Benefits of implementing Internet enabled supply chains with the proposed infrastructure are discussed. A case study on Internet enabled supply chain management is presented.

Drive mechanism nuclear reactor control rod

International Nuclear Information System (INIS)

Brooks, J.G. Jr.; Maure, D.R.; Meijer, C.H.

1978-01-01

An improved method and apparatus for operating magnetic stepping-type mechanisms. The current flowing in the coils of magnetic stepping-type mechanisms of the kind, for instance, that are used in control-element drive mechanisms is sensed and used to monitor operation of the mechanism. Current waveforms that characterize the motion of the mechanism are used to trigger changes in drive voltage and to verify that the drive mechanism is operating properly. In addition, incipient failures are detected through the observation of differences between the observed waveform and waveforms that characterize proper operation

Parallel Vortex Body Interaction Enabled by Active Flow Control

Science.gov (United States)

Weingaertner, Andre; Tewes, Philipp; Little, Jesse

2017-11-01

An experimental study was conducted to explore the flow physics of parallel vortex body interaction between two NACA 0012 airfoils. Experiments were carried out at chord Reynolds numbers of 740,000. Initially, the leading airfoil was characterized without the target one being installed. Results are in good agreement with thin airfoil theory and data provided in the literature. Afterward, the leading airfoil was fixed at 18° incidence and the target airfoil was installed 6 chord lengths downstream. Plasma actuation (ns-DBD), originating close to the leading edge, was used to control vortex shedding from the leading airfoil at various frequencies (0.04 governing parameters of this vortex body interaction are explored. This work was supported by the Army Research Office under ARO Grant No. W911NF-14-1-0662.

Temperature and Humidity Control in Livestock Stables

DEFF Research Database (Denmark)

Hansen, Michael; Andersen, Palle; Nielsen, Kirsten M.

2010-01-01

The paper describes temperature and humidity control of a livestock stable. It is important to have a correct air flow pattern in the livestock stable in order to achieve proper temperature and humidity control as well as to avoid draught. In the investigated livestock stable the air flow...

Condom Use: Slippage, Breakage, and Steps for Proper Use among Adolescents in Alternative School Settings

Science.gov (United States)

Coyle, Karin K.; Franks, Heather M.; Glassman, Jill R.; Stanoff, Nicole M.

2012-01-01

Background: School-based human immunodeficiency virus (HIV)/sexually transmitted infection (STI), and pregnancy prevention programs often focus on consistent and correct condom use. Research on adolescents' experience using condoms, including condom slippage/breakage, is limited. This exploratory study examines proper condom use and the…

Task-role-based Access Control Model in Smart Health-care System

Directory of Open Access Journals (Sweden)

Wang Peng

2015-01-01

Full Text Available As the development of computer science and smart health-care technology, there is a trend for patients to enjoy medical care at home. Taking enormous users in the Smart Health-care System into consideration, access control is an important issue. Traditional access control models, discretionary access control, mandatory access control, and role-based access control, do not properly reflect the characteristics of Smart Health-care System. This paper proposes an advanced access control model for the medical health-care environment, task-role-based access control model, which overcomes the disadvantages of traditional access control models. The task-role-based access control (T-RBAC model introduces a task concept, dividing tasks into four categories. It also supports supervision role hierarchy. T-RBAC is a proper access control model for Smart Health-care System, and it improves the management of access rights. This paper also proposes an implementation of T-RBAC, a binary two-key-lock pair access control scheme using prime factorization.

Parallel Monte Carlo simulations on an ARC-enabled computing grid

International Nuclear Information System (INIS)

Nilsen, Jon K; Samset, Bjørn H

2011-01-01

Grid computing opens new possibilities for running heavy Monte Carlo simulations of physical systems in parallel. The presentation gives an overview of GaMPI, a system for running an MPI-based random walker simulation on grid resources. Integrating the ARC middleware and the new storage system Chelonia with the Ganga grid job submission and control system, we show that MPI jobs can be run on a world-wide computing grid with good performance and promising scaling properties. Results for relatively communication-heavy Monte Carlo simulations run on multiple heterogeneous, ARC-enabled computing clusters in several countries are presented.

A decentralized control scheme for an effective coordination of phasic and tonic control in a snake-like robot

International Nuclear Information System (INIS)

Sato, Takahide; Kano, Takeshi; Ishiguro, Akio

2012-01-01

Autonomous decentralized control has attracted considerable attention because it enables us to understand the adaptive and versatile locomotion of animals and facilitates the construction of truly intelligent artificial agents. Thus far, we have developed a snake-like robot (HAUBOT I) that is driven by a decentralized control scheme based on a discrepancy function, which incorporates phasic control. In this paper, we investigate a decentralized control scheme in which phasic and tonic control are well coordinated, as an extension of our previous study. To verify the validity of the proposed control scheme, we apply it to a snake-like robot (HAUBOT II) that can adjust both the phase relationship between its body segments and the stiffness at each joint. The results indicate that the proposed control scheme enables the robot to exhibit remarkable real-time adaptability over various frictional and inclined terrains. These findings can potentially enable us to gain a deeper insight into the autonomous decentralized control mechanism underlying the adaptive and resilient locomotion of animals.

On the determination of proper modes in waveguides with wall losses

International Nuclear Information System (INIS)

Dahlberg, E.

1977-02-01

Various attempts at determining the proper modes (propagating with exponential attenuation but without change of form) in a straight waveguide with wall losses are discussed. It appears that for a general cross section a stringent treatment would require a quadruple series expansion along lines indicated by C.C. Johnson in 'Field and wave electrodynamics (McGraw-Hill, 1965). For the most usual cross sections, circular and rectangular, valid derivations can however be made using simpler means. Earlier, incomplete, treatments seem to have caused several widely accepted misconceptions, some of which are discussed. Detailed calculations for a rectangular guide are given in a companion note

Modeling multipulsing transition in ring cavity lasers with proper orthogonal decomposition

International Nuclear Information System (INIS)

Ding, Edwin; Shlizerman, Eli; Kutz, J. Nathan

2010-01-01

A low-dimensional model is constructed via the proper orthogonal decomposition (POD) to characterize the multipulsing phenomenon in a ring cavity laser mode locked by a saturable absorber. The onset of the multipulsing transition is characterized by an oscillatory state (created by a Hopf bifurcation) that is then itself destabilized to a double-pulse configuration (by a fold bifurcation). A four-mode POD analysis, which uses the principal components, or singular value decomposition modes, of the mode-locked laser, provides a simple analytic framework for a complete characterization of the entire transition process and its associated bifurcations. These findings are in good agreement with the full governing equation.

The Role of Inflation and Price Escalation Adjustments in Properly Estimating Program Costs: F-35 Case Study

Science.gov (United States)

2016-04-30

qÜáêíÉÉåíÜ=^ååì~ä= ^Åèìáëáíáçå=oÉëÉ~êÅÜ= póãéçëáìã= qÜìêëÇ~ó=pÉëëáçåë= sçäìãÉ=ff= = The Role of Inflation and Price Escalation Adjustments in Properly...The Role of Inflation and Price Escalation Adjustments in Properly Estimating Program Costs: F-35 Case Study Stanley Horowitz, Assistant Division...Graduate School of Engineering and Management, Air Force Institute of Technology Cost and Price Collaboration Venkat Rao, Professor, Defense

Enabling data science in the Gaia mission archive: The present-day mass function and age distribution

Science.gov (United States)

Tapiador, D.; Berihuete, A.; Sarro, L. M.; Julbe, F.; Huedo, E.

2017-04-01

Recent advances in large scale computing architectures enable new opportunities to extract value out of the vast amounts of data being currently generated. However, their successful adoption is not straightforward in areas like science, as there are still some barriers that need to be overcome. Those comprise (i) the existence of legacy code that needs to be ported, (ii) the lack of high-level and use case specific frameworks that facilitate a smoother transition, or (iii) the scarcity of profiles with the balanced skill sets between the technological and scientific domains. The European Space Agency's Gaia mission will create the largest and most precise three dimensional chart of our galaxy (the Milky Way), providing unprecedented position, parallax and proper motion measurements for about one billion stars. The successful exploitation of this data archive will depend on the ability to offer the proper infrastructure upon which scientists will be able to do exploration and modelling with this huge data set. In this paper, we present and contextualize these challenges by building two probabilistic models using Hierarchical Bayesian Modelling. These models represent a key challenge in astronomy and are of paramount importance for the Gaia mission itself. Moreover, we approach the implementation by leveraging a generic distributed processing engine through an existing software package for Markov chain Monte Carlo sampling. The two computationally intensive models are then validated with simulated data in different scenarios under specific restrictions, and their performance is assessed to prove their scalability. We argue that this approach will not only serve for the models in hand but also for exemplifying how to address similar problems in science, which may need to both scale to bigger data sets and reuse existing software as much as possible. This will lead to shorter time to science in massive data archives.

75 FR 7616 - Mitigation of Carrier Fines for Transporting Aliens Without Proper Documents; Modification of...

Science.gov (United States)

2010-02-22

... Transporting Aliens Without Proper Documents; Modification of Memorandum of Understanding and Recalculation of... States an alien who does not have a valid passport and an unexpired visa, as required under applicable law, is subject to a fine for each alien transported lacking the required documentation. Pursuant to...

Tailoring Stress Incontinence Surgery : “How to install proper diagnostic work-up and individualised treatment”

NARCIS (Netherlands)

Houwert, R.M.

2009-01-01

In this thesis a different principle to determine the value of diagnostic parameters and to install the proper, individualized, surgical treatment for stress urinary incontinence is presented. The aim of the first part of this thesis was to evaluate the value of urodynamic investigation (UDI) in the

Post-translational regulation enables robust p53 regulation.

Science.gov (United States)

Shin, Yong-Jun; Chen, Kai-Yuan; Sayed, Ali H; Hencey, Brandon; Shen, Xiling

2013-08-30

The tumor suppressor protein p53 plays important roles in DNA damage repair, cell cycle arrest and apoptosis. Due to its critical functions, the level of p53 is tightly regulated by a negative feedback mechanism to increase its tolerance towards fluctuations and disturbances. Interestingly, the p53 level is controlled by post-translational regulation rather than transcriptional regulation in this feedback mechanism. We analyzed the dynamics of this feedback to understand whether post-translational regulation provides any advantages over transcriptional regulation in regard to disturbance rejection. When a disturbance happens, even though negative feedback reduces the steady-state error, it can cause a system to become less stable and transiently overshoots, which may erroneously trigger downstream reactions. Therefore, the system needs to balance the trade-off between steady-state and transient errors. Feedback control and adaptive estimation theories revealed that post-translational regulation achieves a better trade-off than transcriptional regulation, contributing to a more steady level of p53 under the influence of noise and disturbances. Furthermore, post-translational regulation enables cells to respond more promptly to stress conditions with consistent amplitude. However, for better disturbance rejection, the p53- Mdm2 negative feedback has to pay a price of higher stochastic noise. Our analyses suggest that the p53-Mdm2 feedback favors regulatory mechanisms that provide the optimal trade-offs for dynamic control.

Proper acceleration, the geometric tachyon and the dynamics of a fundamental string near Dp branes

International Nuclear Information System (INIS)

Das, Ashok; Panda, Sudhakar; Roy, Shibaji

2009-01-01

We present a detailed analysis of our recent observation that the origin of the geometric tachyon, which arises when a Dp brane propagates in the vicinity of a stack of coincident NS5 branes, is due to the proper acceleration generated by the background dilaton field. We show that when a fundamental string (F-string), described by the Nambu-Goto action, is moving in the background of a stack of coincident Dp branes, the geometric tachyon mode can also appear since the overall conformal mode of the induced metric for the string can act as a source for proper acceleration. We also studied the detailed dynamics of the F-string as well as the instability by mapping the Nambu-Goto action of the F-string to the tachyon effective action of the non-BPS D-string. We qualitatively argue that the condensation of the geometric tachyon is responsible for the (F,Dp) bound state formation.

D0 HVAC System Heat Pump Controller Programming, Networking, and Operating Information

International Nuclear Information System (INIS)

Anderson, B.

1999-01-01

The purpose of this engineering note is to provide the necessary information to setup, program, and network the Electronic Systems USA Heat Pump Controller with the LON network card and Intellution Fix32 to operate properly within the HVAC system at D-Zero. The heat pump controllers are used for local temperature control of the office environments on the fifth and six floors of D-Zero. Heat pump units 1-6 are located in the ceiling of the sixth floor. Heat pump units 7-12 are found in the fifth floor ceiling. Heat pump unit 13 is in the Southeast corner of the fifth floor. Prior to installation the heat pump controller must be properly prepared to operate correctly in the HVAC system. Each heat pump unit must contain firmware (software) version 1.31 to operate properly on the network. Controllers with version 1.30 will not be able to communicate over the LON network. The manufacturer can only update the firmware version. Before installation a series of heat pump setpoints must be manually set using the Intelligent Stat. Connect the Intelligent Stat via the serial cable or wired connection.

Ocean Models and Proper Orthogonal Decomposition

Science.gov (United States)

Salas-de-Leon, D. A.

2007-05-01

The increasing computational developments and the better understanding of mathematical and physical systems resulted in an increasing number of ocean models. Long time ago, modelers were like a secret organization and recognize each other by using secret codes and languages that only a select group of people was able to recognize and understand. The access to computational systems was reduced, on one hand equipment and the using time of computers were expensive and restricted, and on the other hand, they required an advance computational languages that not everybody wanted to learn. Now a days most college freshman own a personal computer (PC or laptop), and/or have access to more sophisticated computational systems than those available for research in the early 80's. The resource availability resulted in a mayor access to all kind models. Today computer speed and time and the algorithms does not seem to be a problem, even though some models take days to run in small computational systems. Almost every oceanographic institution has their own model, what is more, in the same institution from one office to the next there are different models for the same phenomena, developed by different research member, the results does not differ substantially since the equations are the same, and the solving algorithms are similar. The algorithms and the grids, constructed with algorithms, can be found in text books and/or over the internet. Every year more sophisticated models are constructed. The Proper Orthogonal Decomposition is a technique that allows the reduction of the number of variables to solve keeping the model properties, for which it can be a very useful tool in diminishing the processes that have to be solved using "small" computational systems, making sophisticated models available for a greater community.

Acceptance Test Procedure for New Pumping and Instrumentation Control Skid M

International Nuclear Information System (INIS)

KOCH, M.R.

1999-01-01

This Acceptance Test Procedure (ATP) verifies proper construction per the design drawings and tests for proper functioning of the Pumping and Instrumentation Control (PIC) skid ''M''. The Scope section lists the systems and functions to be checked. This ATP will be performed at the Site Fabrication Service's (SFS) shop upon completion of construction of the PIC skid

Acceptance Test Procedure for New Pumping Instrumentation and Control Skid ''V''

International Nuclear Information System (INIS)

KOCH, M.R.

2000-01-01

This Acceptance Test Procedure (ATP) verifies proper construction per the design drawings and tests for proper functioning of the Pumping Instrumentation and Control (PIC) skid ''V''. The scope section lists the systems and functions to be checked. This ATP will be performed at the Site Fabrication Services (SFS) shop upon completion of the construction of the PIC skid

An IPMC-enabled bio-inspired bending/twisting fin for underwater applications

Science.gov (United States)

Palmre, Viljar; Hubbard, Joel J.; Fleming, Maxwell; Pugal, David; Kim, Sungjun; Kim, Kwang J.; Leang, Kam K.

2013-01-01

This paper discusses the design, fabrication, and characterization of an ionic polymer-metal composite (IPMC) actuator-based bio-inspired active fin capable of bending and twisting motion. It is pointed out that IPMC strip actuators are used in the simple cantilever configuration to create simple bending (flapping-like) motion for propulsion in underwater autonomous systems. However, the resulting motion is a simple 1D bending and performance is rather limited. To enable more complex deformation, such as the flapping (pitch and heaving) motion of real pectoral and caudal fish fins, a new approach which involves molding or integrating IPMC actuators into a soft boot material to create an active control surface (called a ‘fin’) is presented. The fin can be used to realize complex deformation depending on the orientation and placement of the actuators. In contrast to previously created IPMCs with patterned electrodes for the same purpose, the proposed design avoids (1) the more expensive process of electroless plating platinum all throughout the surface of the actuator and (2) the need for specially patterning the electrodes. Therefore, standard shaped IPMC actuators such as those with rectangular dimensions with varying thicknesses can be used. One unique advantage of the proposed structural design is that custom shaped fins and control surfaces can be easily created without special materials processing. The molding process is cost effective and does not require functionalizing or ‘activating’ the boot material similar to creating IPMCs. For a prototype fin (90 mm wide × 60 mm long × 1.5 mm thick), the measured maximum tip displacement was approximately 44 mm and the twist angle of the fin exceeded 10°. Lift and drag measurements in water where the prototype fin with an airfoil profile was dragged through water at a velocity of 21 cm s-1 showed that the lift and drag forces can be affected by controlling the IPMCs embedded into the fin structure. These

Controllability of switched singular mix-valued logical control networks with constraints

Science.gov (United States)

Deng, Lei; Gong, Mengmeng; Zhu, Peiyong

2018-03-01

The present paper investigates the controllability problem of switched singular mix-valued logical control networks (SSMLCNs) with constraints on states and controls. First, using the semi-tenser product (STP) of matrices, the SSMLCN is expressed in an algebraic form, based on which a necessary and sufficient condition is given for the uniqueness of solution of SSMLCNs. Second, a necessary and sufficient criteria is derived for the controllability of constrained SSMLCNs, by converting a constrained SSMLCN into a parallel constrained switched mix-valued logical control network. Third, an algorithm is presented to design a proper switching sequence and a control scheme which force a state to a reachable state. Finally, a numerical example is given to demonstrate the efficiency of the results obtained in this paper.

Sustainable Venture Capital Investments: An Enabler Investigation

Directory of Open Access Journals (Sweden)

Elena Antarciuc

2018-04-01

Full Text Available Investing in sustainable projects can help tackle the current sustainability challenges. Venture capital investments can contribute significantly to the growth of sustainable start-ups. Sustainable venture capital (SVC research is just emerging. This paper identifies enablers for sustainable venture capital investments in Saudi Arabia taking into account different stakeholders and firm’s tangible and intangible resources. Using perspectives from venture capital experts in Saudi Arabia and the grey-based Decision-Making Trial and Evaluation Laboratory (DEMATEL method, this study pinpoints the most critical enablers and investigates their causal and effect interconnections. The methodological process consists of reviewing the SVC literature and consulting the experts to identify the SVC enablers, creating a questionnaire, acquiring the answers from four experts, analyzing the data with grey-based DEMATEL and performing a sensitivity analysis. The government use of international standards, policies and regulations for sustainable investments, the commitment of the venture capitalists to sustainability and their deep understanding of sustainable business models are the most influential enablers. The paper concludes with implications for different actors, limitations and prospective directions for the sustainable venture capital research.

Enabling Flexible Polymer Tandem Solar Cells by 3D Ptychographic Imaging

DEFF Research Database (Denmark)

Dam, Henrik Friis; Andersen, Thomas Rieks; Pedersen, Emil Bøje Lind

2015-01-01

one after the other by wet processing leaves plenty of room for error and the process development calls for an analytical technique that enables 3D reconstruction of the layer stack with the possibility to probe thickness, density, and chemistry of the individual layers in the stack. The use......The realization of a complete tandem polymer solar cell under ambient conditions using only printing and coating methods on a flexible substrate results in a fully scalable process but also requires accurate control during layer formation to succeed. The serial process where the layers are added...

Activity and Kinematics of White Dwarf-M Dwarf Binaries from the SUPERBLINK Proper Motion Survey

Science.gov (United States)

Skinner, Julie N.; Morgan, Dylan P.; West, Andrew A.; Lépine, Sébastien; Thorstensen, John R.

2017-09-01

We present an activity and kinematic analysis of high proper motion white dwarf-M dwarf binaries (WD+dMs) found in the SUPERBLINK survey, 178 of which are new identifications. To identify WD+dMs, we developed a UV-optical-IR color criterion and conducted a spectroscopic survey to confirm each candidate binary. For the newly identified systems, we fit the two components using model white dwarf spectra and M dwarf template spectra to determine physical parameters. We use Hα chromospheric emission to examine the magnetic activity of the M dwarf in each system, and investigate how its activity is affected by the presence of a white dwarf companion. We find that the fraction of WD+dM binaries with active M dwarfs is significantly higher than their single M dwarf counterparts at early and mid-spectral types. We corroborate previous studies that find high activity fractions at both close and intermediate separations. At more distant separations, the binary fraction appears to approach the activity fraction for single M dwarfs. Using derived radial velocities and the proper motions, we calculate 3D space velocities for the WD+dMs in SUPERBLINK. For the entire SUPERBLINK WD+dMs, we find a large vertical velocity dispersion, indicating a dynamically hotter population compared to high proper motion samples of single M dwarfs. We compare the kinematics for systems with active M dwarfs and those with inactive M dwarfs, and find signatures of asymmetric drift in the inactive sample, indicating that they are drawn from an older population. Based on observations obtained at the MDM Observatory operated by Dartmouth College, Columbia University, The Ohio State University, and the University of Michigan.

Proper Motions of Dwarf Spheroidal Galaxies from Hubble Space Telescope Imaging. IV. Measurement for Sculptor

Science.gov (United States)

Piatek, Slawomir; Pryor, Carlton; Bristow, Paul; Olszewski, Edward W.; Harris, Hugh C.; Mateo, Mario; Minniti, Dante; Tinney, Christopher G.

2006-03-01

This article presents a measurement of the proper motion of the Sculptor dwarf spheroidal galaxy determined from images taken with the Hubble Space Telescope using the Space Telescope Imaging Spectrograph in the imaging mode. Each of two distinct fields contains a quasi-stellar object that serves as the ``reference point.'' The measured proper motion of Sculptor, expressed in the equatorial coordinate system, is (μα, μδ)=(9+/-13, 2+/-13) mas century-1. Removing the contributions from the motion of the Sun and the motion of the local standard of rest produces the proper motion in the Galactic rest frame: (μGrfα, μGrfδ)=(-23+/-13, 45+/-13) mas century-1. The implied space velocity with respect to the Galactic center has a radial component of Vr=79+/-6 km s-1 and a tangential component of Vt=198+/-50 km s-1. Integrating the motion of Sculptor in a realistic potential for the Milky Way produces orbital elements. The perigalacticon and apogalacticon are 68 (31, 83) and 122 (97, 313) kpc, respectively, where the values in the parentheses represent the 95% confidence interval derived from Monte Carlo experiments. The eccentricity of the orbit is 0.29 (0.26, 0.60), and the orbital period is 2.2 (1.5, 4.9) Gyr. Sculptor is on a polar orbit around the Milky Way: the angle of inclination is 86° (83°, 90°). Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26555.

A semantic representation of the knowledge management enablers domain: The aKMEOnt ontology

OpenAIRE

Sabri, M.; Odeh, M. ed; Saad, M. ed

2017-01-01

Knowledge management is a significant driver for any enterprise development and evolution as it is engaged with planning, implementing, controlling, monitoring and improving enterprise’s processes and systems. However, organisations are still at a disadvantage when applying knowledge management in a real environment. A resourced-based view of knowledge management stimulates the consideration of knowledge management enablers (KMEs) as factors that should be employed during the development and ...

Development of the Coordination between Posture and Manual Control

Science.gov (United States)

Haddad, Jeffrey M.; Claxton, Laura J.; Keen, Rachel; Berthier, Neil E.; Riccio, Gary E.; Hamill, Joseph; Van Emmerik, Richard E. A.

2012-01-01

Studies have suggested that proper postural control is essential for the development of reaching. However, little research has examined the development of the coordination between posture and manual control throughout childhood. We investigated the coordination between posture and manual control in children (7- and 10-year-olds) and adults during…

Organizational Enablers for Project Governance

DEFF Research Database (Denmark)

Müller, Ralf; Shao, Jingting; Pemsel, Sofia

and their relationships to organizational success. Based on these results, the authors discovered that organizational enablers (including key factors such as leadership, governance, and influence of project managers) have a critical impact on how organizations operate, adapt to market fluctuations and forces, and make......While corporate culture plays a significant role in the success of any corporation, governance and “governmentality” not only determine how business should be conducted, but also define the policies and procedures organizations follow to achieve business functions and goals. In their book......, Organizational Enablers for Project Governance, Ralf Müller, Jingting Shao, and Sofia Pemsel examine the interaction of governance and governmentality in various types of companies and demonstrate how these factors drive business success and influence project work, efficiency, and profitability. The data...

Toxicological Implications of Released Particulate Matter during Thermal Decomposition of Nano-Enabled Thermoplastics.

Science.gov (United States)

Watson-Wright, Christa; Singh, Dilpreet; Demokritou, Philip

2017-01-01

Nano-enabled thermoplastics are part of the growing market of nano-enabled products (NEPs) that have vast utility in several industries and consumer goods. The use and disposal of NEPs at their end of life has raised concerns about the potential release of constituent engineered nanomaterials (ENMs) during thermal decomposition and their impact on environmental health and safety. To investigate this issue, industrially relevant nano-enabled thermoplastics including polyurethane, polycarbonate, and polypropylene containing carbon nanotubes (0.1 and 3% w/v, respectively), polyethylene containing nanoscale iron oxide (5% w/v), and ethylene vinyl acetate containing nanoscale titania (2 and 5% w/v) along with their pure thermoplastic matrices were thermally decomposed using the recently developed lab based Integrated Exposure Generation System (INEXS). The life cycle released particulate matter (called LCPM) was monitored using real time instrumentation, size fractionated, sampled, extracted and prepared for toxicological analysis using primary small airway epithelial cells to assess potential toxicological effects. Various cellular assays were used to assess reactive oxygen species and total glutathione as measurements of oxidative stress along with mitochondrial function, cellular viability, and DNA damage. By comparing toxicological profiles of LCPM released from polymer only (control) with nano-enabled LCPM, potential nanofiller effects due to the use of ENMs were determined. We observed associations between NEP properties such as the percent nanofiller loading, host matrix, and nanofiller chemical composition and the physico-chemical properties of released LCPM, which were linked to biological outcomes. More specifically, an increase in percent nanofiller loading promoted a toxicological response independent of increasing LCPM dose. Importantly, differences in host matrix and nanofiller composition were shown to enhance biological activity and toxicity of LCPM

Multivariate approaches for stability control of the olive oil reference materials for sensory analysis - part I: framework and fundamentals.

Science.gov (United States)

Valverde-Som, Lucia; Ruiz-Samblás, Cristina; Rodríguez-García, Francisco P; Cuadros-Rodríguez, Luis

2018-02-09

Virgin olive oil is the only food product for which sensory analysis is regulated to classify it in different quality categories. To harmonize the results of the sensorial method, the use of standards or reference materials is crucial. The stability of sensory reference materials is required to enable their suitable control, aiming to confirm that their specific target values are maintained on an ongoing basis. Currently, such stability is monitored by means of sensory analysis and the sensory panels are in the paradoxical situation of controlling the standards that are devoted to controlling the panels. In the present study, several approaches based on similarity analysis are exploited. For each approach, the specific methodology to build a proper multivariate control chart to monitor the stability of the sensory properties is explained and discussed. The normalized Euclidean and Mahalanobis distances, the so-called nearness and hardiness indices respectively, have been defined as new similarity indices to range the values from 0 to 1. Also, the squared mean from Hotelling's T 2 -statistic and Q 2 -statistic has been proposed as another similarity index. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

14 CFR Appendix A to Part 129 - Application for Operations Specifications by Foreign Air Carriers

Science.gov (United States)

2010-01-01

.... Operations. State whether the operation proposed is day or night, visual flight rules, instrument flight...). Sec. IV. Communications facilities. List all communication facilities to be used by the applicant in... English language to a degree necessary to enable them to properly communicate with Airport Traffic Control...

Knowledge of the inhabitants of Lubelskie region on proper eating habits

Directory of Open Access Journals (Sweden)

Dorota Weber

2017-08-01

  Due to the fact that care about health, where proper eating habits are one of its constituents, exerts a strong impact on both social and economic life of a country, it is not just an individual case of each person, but a public matter.  The state of health status is obviously subject to a number of factors. However, the habits and customs with regard to daily habits are of particular importance due to the significance of food for the physical existence of each human body. These habits are formed in childhood and youth, however they undergo modifications throughout the whole life. Quite frequently the possessed knowledge is not a sufficient motivation to make great changes in the manner of eating, thus it does not change the eating habits. The aim of the paper is to determine the level of knowledge of clinic patients, selected at random, on proper eating habits. Materials and methods The research was conducted during the period of January-February 2016 year in a Lublin clinic. The investigation comprised 148 respondents. The method used in the research was a diagnostic survey, and the selected technique was a questionnaire conducted among the respondents, using a birth certificate, an interview and an anthropometric study. The study included 148 persons, who were further divided into two groups: students and workers. The respondents were the inhabitants of Lublin and nearby villages. The survey findings underwent a static programme analysis in Statistica 9.1 software (StatSoft, Poland. Conclusions The identification of nutritional knowledge and dietary behaviours of consumers as well as determination of the level and diversity of their nutritional awareness should become the basis for the preparation of guidelines on the content of broadcasts in order to promote healthy eating habits among consumers of different groups.

Proper Methodology and Methods of Collecting and Analyzing Slavery Data: An Examination of the Global Slavery Index

Directory of Open Access Journals (Sweden)

Andrew Guth

2014-11-01

Full Text Available The Global Slavery Index aims to, among other objectives, recognize the forms, size, and scope of slavery worldwide as well as the strengths and weaknesses of individual countries. An analysis of the Index’s methods exposes significant and critical weaknesses and raises questions into its replicability and validity. The Index may prove more valuable in the future if proper methods are implemented, but the longer improper methods are used the more damage is done to the public policy debate on slavery by advancing data and policy that is not based on sound methodology. To implement proper methods, a committee of sophisticated methodologists needs to develop measurement tools and constantly analyze and refine these methods over the years as data is collected.

New chopper control at ILL

Energy Technology Data Exchange (ETDEWEB)

Descamps, F [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France)

1997-04-01

Proper phasing is an essential characteristic of the chopper systems used at ILL. A wide variety of choppers and selectors differing in weight, speed and bearing types are controlled by a unique electronic card performing digital adaptative filtering. The chopper regulation system is described. (author).

Web-enabled Data Warehouse and Data Webhouse

Directory of Open Access Journals (Sweden)

Cerasela PIRVU

2008-01-01

Full Text Available In this paper, our objectives are to understanding what data warehouse means examine the reasons for doing so, appreciate the implications of the convergence of Web technologies and those of the data warehouse and examine the steps for building a Web-enabled data warehouse. The web revolution has propelled the data warehouse out onto the main stage, because in many situations the data warehouse must be the engine that controls or analysis the web experience. In order to step up to this new responsibility, the data warehouse must adjust. The nature of the data warehouse needs to be somewhat different. As a result, our data warehouses are becoming data webhouses. The data warehouse is becoming the infrastructure that supports customer relationship management (CRM. And the data warehouse is being asked to make the customer clickstream available for analysis. This rebirth of data warehousing architecture is called the data webhouse.

Origami-enabled deformable silicon solar cells

Energy Technology Data Exchange (ETDEWEB)

Tang, Rui; Huang, Hai; Liang, Hanshuang; Liang, Mengbing [School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona 85287 (United States); Tu, Hongen; Xu, Yong [Electrical and Computer Engineering, Wayne State University, 5050 Anthony Wayne Dr., Detroit, Michigan 48202 (United States); Song, Zeming; Jiang, Hanqing, E-mail: hanqing.jiang@asu.edu [School for Engineering of Matter, Transport and Energy, Arizona State University, Tempe, Arizona 85287 (United States); Yu, Hongyu, E-mail: hongyu.yu@asu.edu [School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona 85287 (United States); School of Earth and Space Exploration, Arizona State University, Tempe, Arizona 85287 (United States)

2014-02-24

Deformable electronics have found various applications and elastomeric materials have been widely used to reach flexibility and stretchability. In this Letter, we report an alternative approach to enable deformability through origami. In this approach, the deformability is achieved through folding and unfolding at the creases while the functional devices do not experience strain. We have demonstrated an example of origami-enabled silicon solar cells and showed that this solar cell can reach up to 644% areal compactness while maintaining reasonable good performance upon cyclic folding/unfolding. This approach opens an alternative direction of producing flexible, stretchable, and deformable electronics.

Origami-enabled deformable silicon solar cells

International Nuclear Information System (INIS)

Tang, Rui; Huang, Hai; Liang, Hanshuang; Liang, Mengbing; Tu, Hongen; Xu, Yong; Song, Zeming; Jiang, Hanqing; Yu, Hongyu

2014-01-01

Deformable electronics have found various applications and elastomeric materials have been widely used to reach flexibility and stretchability. In this Letter, we report an alternative approach to enable deformability through origami. In this approach, the deformability is achieved through folding and unfolding at the creases while the functional devices do not experience strain. We have demonstrated an example of origami-enabled silicon solar cells and showed that this solar cell can reach up to 644% areal compactness while maintaining reasonable good performance upon cyclic folding/unfolding. This approach opens an alternative direction of producing flexible, stretchable, and deformable electronics

COMMON PROPER-MOTION WIDE WHITE DWARF BINARIES SELECTED FROM THE SLOAN DIGITAL SKY SURVEY

International Nuclear Information System (INIS)

Andrews, Jeff J.; Agüeros, Marcel A.; Belczynski, Krzysztof; Dhital, Saurav; Kleinman, S. J.; West, Andrew A.

2012-01-01

Wide binaries made up of two white dwarfs (WDs) receive far less attention than their tight counterparts. However, our tests using the binary population synthesis code StarTrack indicate that, for any set of reasonable initial conditions, there exists a significant observable population of double white dwarfs (WDWDs) with orbital separations of 10 2 -10 5 AU. We adapt the technique of Dhital et al. to search for candidate common proper-motion WD companions separated by 12,000 spectroscopically confirmed hydrogen-atmosphere WDs recently identified in the Sloan Digital Sky Survey. Using two techniques to separate random alignments from high-confidence pairs, we find nine new high-probability wide WDWDs and confirm three previously identified candidate wide WDWDs. This brings the number of known wide WDWDs to 45; our new pairs are a significant addition to the sample, especially at small proper motions ( –1 ) and large angular separations (>10''). Spectroscopic follow-up and an extension of this method to a larger, photometrically selected set of SDSS WDs may eventually produce a large enough dataset for WDWDs to realize their full potential as testbeds for theories of stellar evolution.