A Novel Morphometry-Based Protocol of Automated Video-Image Analysis for Species Recognition and Activity Rhythms Monitoring in Deep-Sea Fauna

Directory of Open Access Journals (Sweden)

Paolo Menesatti

2009-10-01

Full Text Available The understanding of ecosystem dynamics in deep-sea areas is to date limited by technical constraints on sampling repetition. We have elaborated a morphometry-based protocol for automated video-image analysis where animal movement tracking (by frame subtraction is accompanied by species identification from animals’ outlines by Fourier Descriptors and Standard K-Nearest Neighbours methods. One-week footage from a permanent video-station located at 1,100 m depth in Sagami Bay (Central Japan was analysed. Out of 150,000 frames (1 per 4 s, a subset of 10.000 was analyzed by a trained operator to increase the efficiency of the automated procedure. Error estimation of the automated and trained operator procedure was computed as a measure of protocol performance. Three displacing species were identified as the most recurrent: Zoarcid fishes (eelpouts, red crabs (Paralomis multispina, and snails (Buccinum soyomaruae. Species identification with KNN thresholding produced better results in automated motion detection. Results were discussed assuming that the technological bottleneck is to date deeply conditioning the exploration of the deep-sea.

Learning computer science by watching video games

OpenAIRE

Nagataki, Hiroyuki

2014-01-01

This paper proposes a teaching method that utilizes video games in computer science education. The primary characteristic of this approach is that it utilizes video games as observational materials. The underlying idea is that by observing the computational behavior of a wide variety of video games, learners will easily grasp the fundamental architecture, theory, and technology of computers. The results of a case study conducted indicate that the method enhances the motivation of students for...

Automated Video Surveillance for the Study of Marine Mammal Behavior and Cognition

Directory of Open Access Journals (Sweden)

Jeremy Karnowski

2016-11-01

Full Text Available Systems for detecting and tracking social marine mammals, including dolphins, can provide data to help explain their social dynamics, predict their behavior, and measure the impact of human interference. Data collected from video surveillance methods can be consistently and systematically sampled for studies of behavior, and frame-by-frame analyses can uncover insights impossible to observe from real-time, freely occurring natural behavior. Advances in boat-based, aerial, and underwater recording platforms provide opportunities to document the behavior of marine mammals and create massive datasets. The use of human experts to detect, track, identify individuals, and recognize activity in video demands significant time and financial investment. This paper examines automated methods designed to analyze large video corpora containing marine mammals. While research is converging on best solutions for some automated tasks, particularly detection and classification, many research domains are ripe for exploration.

Automated intelligent video surveillance system for ships

Science.gov (United States)

Wei, Hai; Nguyen, Hieu; Ramu, Prakash; Raju, Chaitanya; Liu, Xiaoqing; Yadegar, Jacob

2009-05-01

To protect naval and commercial ships from attack by terrorists and pirates, it is important to have automatic surveillance systems able to detect, identify, track and alert the crew on small watercrafts that might pursue malicious intentions, while ruling out non-threat entities. Radar systems have limitations on the minimum detectable range and lack high-level classification power. In this paper, we present an innovative Automated Intelligent Video Surveillance System for Ships (AIVS3) as a vision-based solution for ship security. Capitalizing on advanced computer vision algorithms and practical machine learning methodologies, the developed AIVS3 is not only capable of efficiently and robustly detecting, classifying, and tracking various maritime targets, but also able to fuse heterogeneous target information to interpret scene activities, associate targets with levels of threat, and issue the corresponding alerts/recommendations to the man-in- the-loop (MITL). AIVS3 has been tested in various maritime scenarios and shown accurate and effective threat detection performance. By reducing the reliance on human eyes to monitor cluttered scenes, AIVS3 will save the manpower while increasing the accuracy in detection and identification of asymmetric attacks for ship protection.

Methods and Algorithms for Detecting Objects in Video Files

Directory of Open Access Journals (Sweden)

Nguyen The Cuong

2018-01-01

Full Text Available Video files are files that store motion pictures and sounds like in real life. In today's world, the need for automated processing of information in video files is increasing. Automated processing of information has a wide range of application including office/home surveillance cameras, traffic control, sports applications, remote object detection, and others. In particular, detection and tracking of object movement in video file plays an important role. This article describes the methods of detecting objects in video files. Today, this problem in the field of computer vision is being studied worldwide.

The Implementation of Blended Learning Using Android-Based Tutorial Video in Computer Programming Course II

Science.gov (United States)

Huda, C.; Hudha, M. N.; Ain, N.; Nandiyanto, A. B. D.; Abdullah, A. G.; Widiaty, I.

2018-01-01

Computer programming course is theoretical. Sufficient practice is necessary to facilitate conceptual understanding and encouraging creativity in designing computer programs/animation. The development of tutorial video in an Android-based blended learning is needed for students’ guide. Using Android-based instructional material, students can independently learn anywhere and anytime. The tutorial video can facilitate students’ understanding about concepts, materials, and procedures of programming/animation making in detail. This study employed a Research and Development method adapting Thiagarajan’s 4D model. The developed Android-based instructional material and tutorial video were validated by experts in instructional media and experts in physics education. The expert validation results showed that the Android-based material was comprehensive and very feasible. The tutorial video was deemed feasible as it received average score of 92.9%. It was also revealed that students’ conceptual understanding, skills, and creativity in designing computer program/animation improved significantly.

Deep learning for quality assessment in live video streaming

NARCIS (Netherlands)

Torres Vega, M.; Mocanu, D.C.; Famaey, J.; Stavrou, S.; Liotta, A.

Video content providers put stringent requirements on the quality assessment methods realized on their services. They need to be accurate, real-time, adaptable to new content, and scalable as the video set grows. In this letter, we introduce a novel automated and computationally efficient video

Computer automation and artificial intelligence

International Nuclear Information System (INIS)

Hasnain, S.B.

1992-01-01

Rapid advances in computing, resulting from micro chip revolution has increased its application manifold particularly for computer automation. Yet the level of automation available, has limited its application to more complex and dynamic systems which require an intelligent computer control. In this paper a review of Artificial intelligence techniques used to augment automation is presented. The current sequential processing approach usually adopted in artificial intelligence has succeeded in emulating the symbolic processing part of intelligence, but the processing power required to get more elusive aspects of intelligence leads towards parallel processing. An overview of parallel processing with emphasis on transputer is also provided. A Fuzzy knowledge based controller for amination drug delivery in muscle relaxant anesthesia on transputer is described. 4 figs. (author)

Automation of pharmaceutical warehouse using groups robots with remote climate control and video surveillance

OpenAIRE

Zhuravska, I. M.; Popel, M. I.

2015-01-01

In this paper, we present a complex solution for automation pharmaceutical warehouse, including the implementation of climate-control, video surveillance with remote access to video, robotics selection of medicine with the optimization of the robot motion. We describe all the elements of local area network (LAN) necessary to solve all these problems.

Computer system architecture for laboratory automation

International Nuclear Information System (INIS)

Penney, B.K.

1978-01-01

This paper describes the various approaches that may be taken to provide computing resources for laboratory automation. Three distinct approaches are identified, the single dedicated small computer, shared use of a larger computer, and a distributed approach in which resources are provided by a number of computers, linked together, and working in some cooperative way. The significance of the microprocessor in laboratory automation is discussed, and it is shown that it is not simply a cheap replacement of the minicomputer. (Auth.)

Sunglass detection method for automation of video surveillance system

Science.gov (United States)

Sikandar, Tasriva; Samsudin, Wan Nur Azhani W.; Hawari Ghazali, Kamarul; Mohd, Izzeldin I.; Fazle Rabbi, Mohammad

2018-04-01

Wearing sunglass to hide face from surveillance camera is a common activity in criminal incidences. Therefore, sunglass detection from surveillance video has become a demanding issue in automation of security systems. In this paper we propose an image processing method to detect sunglass from surveillance images. Specifically, a unique feature using facial height and width has been employed to identify the covered region of the face. The presence of covered area by sunglass is evaluated using facial height-width ratio. Threshold value of covered area percentage is used to classify the glass wearing face. Two different types of glasses have been considered i.e. eye glass and sunglass. The results of this study demonstrate that the proposed method is able to detect sunglasses in two different illumination conditions such as, room illumination as well as in the presence of sunlight. In addition, due to the multi-level checking in facial region, this method has 100% accuracy of detecting sunglass. However, in an exceptional case where fabric surrounding the face has similar color as skin, the correct detection rate was found 93.33% for eye glass.

‘PhysTrack’: a Matlab based environment for video tracking of kinematics in the physics laboratory

Science.gov (United States)

Umar Hassan, Muhammad; Sabieh Anwar, Muhammad

2017-07-01

In the past two decades, several computer software tools have been developed to investigate the motion of moving bodies in physics laboratories. In this article we report a Matlab based video tracking library, PhysTrack, primarily designed to investigate kinematics. We compare PhysTrack with other commonly available video tracking tools and outline its salient features. The general methodology of the whole video tracking process is described with a step by step explanation of several functionalities. Furthermore, results of some real physics experiments are also provided to demonstrate the working of the automated video tracking, data extraction, data analysis and presentation tools that come with this development environment. We believe that PhysTrack will be valuable for the large community of physics teachers and students already employing Matlab.

Computer-Aided Video Differential Planimetry

Science.gov (United States)

Tobin, Michael; Djoleto, Ben D.

1984-08-01

THE VIDEO DIFFERENTIAL PLANIMETER (VDP)1 is a re-mote sensing instrument that can measure minute changes in the area of any object seen by an optical scanning system. The composite video waveforms obtained by scanning the object against a contrasting back-ground are amplified and shaped to yield a sequence of constant amplitude pulses whose polarity distinguishes the studied area from its background and whose varying widths reflect the dynamics of the viewed object. These pulses are passed through a relatively long time-constant capacitor-resistor circuit and are then fed into an integrator. The net integration voltage resulting from the most recent sequence of object-background time pulses is recorded and the integrator is returned to zero at the end of each video frame. If the object's area remains constant throughout the following frame, the integrator's summation will also remain constant. However, if the object's area varies, the positive and negative time pulses entering the integrator will change, and the integrator's summation will vary proportionately. The addition of a computer interface and a video recorder enhances the versatility and the resolving power of the VDP by permitting the repeated study and analysis of selected portions of the recorded data, thereby uncovering the major sources of the object's dynamics. Among the medical and biological procedures for which COMPUTER-AIDED VIDEO DIFFERENTIAL PLANIMETRY is suitable are Ophthalmoscopy, Endoscopy, Microscopy, Plethysmography, etc. A recent research study in Ophthalmoscopy2 will be cited to suggest a useful application of Video Differential Planimetry.

Gamifying Video Object Segmentation.

Science.gov (United States)

Spampinato, Concetto; Palazzo, Simone; Giordano, Daniela

2017-10-01

Video object segmentation can be considered as one of the most challenging computer vision problems. Indeed, so far, no existing solution is able to effectively deal with the peculiarities of real-world videos, especially in cases of articulated motion and object occlusions; limitations that appear more evident when we compare the performance of automated methods with the human one. However, manually segmenting objects in videos is largely impractical as it requires a lot of time and concentration. To address this problem, in this paper we propose an interactive video object segmentation method, which exploits, on one hand, the capability of humans to identify correctly objects in visual scenes, and on the other hand, the collective human brainpower to solve challenging and large-scale tasks. In particular, our method relies on a game with a purpose to collect human inputs on object locations, followed by an accurate segmentation phase achieved by optimizing an energy function encoding spatial and temporal constraints between object regions as well as human-provided location priors. Performance analysis carried out on complex video benchmarks, and exploiting data provided by over 60 users, demonstrated that our method shows a better trade-off between annotation times and segmentation accuracy than interactive video annotation and automated video object segmentation approaches.

ATLAS Distributed Computing Automation

CERN Document Server

Schovancova, J; The ATLAS collaboration; Borrego, C; Campana, S; Di Girolamo, A; Elmsheuser, J; Hejbal, J; Kouba, T; Legger, F; Magradze, E; Medrano Llamas, R; Negri, G; Rinaldi, L; Sciacca, G; Serfon, C; Van Der Ster, D C

2012-01-01

The ATLAS Experiment benefits from computing resources distributed worldwide at more than 100 WLCG sites. The ATLAS Grid sites provide over 100k CPU job slots, over 100 PB of storage space on disk or tape. Monitoring of status of such a complex infrastructure is essential. The ATLAS Grid infrastructure is monitored 24/7 by two teams of shifters distributed world-wide, by the ATLAS Distributed Computing experts, and by site administrators. In this paper we summarize automation efforts performed within the ATLAS Distributed Computing team in order to reduce manpower costs and improve the reliability of the system. Different aspects of the automation process are described: from the ATLAS Grid site topology provided by the ATLAS Grid Information System, via automatic site testing by the HammerCloud, to automatic exclusion from production or analysis activities.

Video Encryption and Decryption on Quantum Computers

Science.gov (United States)

Yan, Fei; Iliyasu, Abdullah M.; Venegas-Andraca, Salvador E.; Yang, Huamin

2015-08-01

A method for video encryption and decryption on quantum computers is proposed based on color information transformations on each frame encoding the content of the encoding the content of the video. The proposed method provides a flexible operation to encrypt quantum video by means of the quantum measurement in order to enhance the security of the video. To validate the proposed approach, a tetris tile-matching puzzle game video is utilized in the experimental simulations. The results obtained suggest that the proposed method enhances the security and speed of quantum video encryption and decryption, both properties required for secure transmission and sharing of video content in quantum communication.

Video-based rendering

CERN Document Server

Magnor, Marcus A

2005-01-01

Driven by consumer-market applications that enjoy steadily increasing economic importance, graphics hardware and rendering algorithms are a central focus of computer graphics research. Video-based rendering is an approach that aims to overcome the current bottleneck in the time-consuming modeling process and has applications in areas such as computer games, special effects, and interactive TV. This book offers an in-depth introduction to video-based rendering, a rapidly developing new interdisciplinary topic employing techniques from computer graphics, computer vision, and telecommunication en

Turning Video Resource Management into Cloud Computing

Directory of Open Access Journals (Sweden)

Weili Kou

2016-07-01

Full Text Available Big data makes cloud computing more and more popular in various fields. Video resources are very useful and important to education, security monitoring, and so on. However, issues of their huge volumes, complex data types, inefficient processing performance, weak security, and long times for loading pose challenges in video resource management. The Hadoop Distributed File System (HDFS is an open-source framework, which can provide cloud-based platforms and presents an opportunity for solving these problems. This paper presents video resource management architecture based on HDFS to provide a uniform framework and a five-layer model for standardizing the current various algorithms and applications. The architecture, basic model, and key algorithms are designed for turning video resources into a cloud computing environment. The design was tested by establishing a simulation system prototype.

Immersive video

Science.gov (United States)

Moezzi, Saied; Katkere, Arun L.; Jain, Ramesh C.

1996-03-01

Interactive video and television viewers should have the power to control their viewing position. To make this a reality, we introduce the concept of Immersive Video, which employs computer vision and computer graphics technologies to provide remote users a sense of complete immersion when viewing an event. Immersive Video uses multiple videos of an event, captured from different perspectives, to generate a full 3D digital video of that event. That is accomplished by assimilating important information from each video stream into a comprehensive, dynamic, 3D model of the environment. Using this 3D digital video, interactive viewers can then move around the remote environment and observe the events taking place from any desired perspective. Our Immersive Video System currently provides interactive viewing and `walkthrus' of staged karate demonstrations, basketball games, dance performances, and typical campus scenes. In its full realization, Immersive Video will be a paradigm shift in visual communication which will revolutionize television and video media, and become an integral part of future telepresence and virtual reality systems.

Automated Video Analysis of Non-verbal Communication in a Medical Setting.

Science.gov (United States)

Hart, Yuval; Czerniak, Efrat; Karnieli-Miller, Orit; Mayo, Avraham E; Ziv, Amitai; Biegon, Anat; Citron, Atay; Alon, Uri

2016-01-01

Non-verbal communication plays a significant role in establishing good rapport between physicians and patients and may influence aspects of patient health outcomes. It is therefore important to analyze non-verbal communication in medical settings. Current approaches to measure non-verbal interactions in medicine employ coding by human raters. Such tools are labor intensive and hence limit the scale of possible studies. Here, we present an automated video analysis tool for non-verbal interactions in a medical setting. We test the tool using videos of subjects that interact with an actor portraying a doctor. The actor interviews the subjects performing one of two scripted scenarios of interviewing the subjects: in one scenario the actor showed minimal engagement with the subject. The second scenario included active listening by the doctor and attentiveness to the subject. We analyze the cross correlation in total kinetic energy of the two people in the dyad, and also characterize the frequency spectrum of their motion. We find large differences in interpersonal motion synchrony and entrainment between the two performance scenarios. The active listening scenario shows more synchrony and more symmetric followership than the other scenario. Moreover, the active listening scenario shows more high-frequency motion termed jitter that has been recently suggested to be a marker of followership. The present approach may be useful for analyzing physician-patient interactions in terms of synchrony and dominance in a range of medical settings.

Rapid prototyping of an automated video surveillance system: a hardware-software co-design approach

Science.gov (United States)

Ngo, Hau T.; Rakvic, Ryan N.; Broussard, Randy P.; Ives, Robert W.

2011-06-01

FPGA devices with embedded DSP and memory blocks, and high-speed interfaces are ideal for real-time video processing applications. In this work, a hardware-software co-design approach is proposed to effectively utilize FPGA features for a prototype of an automated video surveillance system. Time-critical steps of the video surveillance algorithm are designed and implemented in the FPGAs logic elements to maximize parallel processing. Other non timecritical tasks are achieved by executing a high level language program on an embedded Nios-II processor. Pre-tested and verified video and interface functions from a standard video framework are utilized to significantly reduce development and verification time. Custom and parallel processing modules are integrated into the video processing chain by Altera's Avalon Streaming video protocol. Other data control interfaces are achieved by connecting hardware controllers to a Nios-II processor using Altera's Avalon Memory Mapped protocol.

Application aware approach to compression and transmission of H.264 encoded video for automated and centralized transportation surveillance.

Science.gov (United States)

2012-10-01

In this report we present a transportation video coding and wireless transmission system specically tailored to automated : vehicle tracking applications. By taking into account the video characteristics and the lossy nature of the wireless channe...

A new colorimetrically-calibrated automated video-imaging protocol for day-night fish counting at the OBSEA coastal cabled observatory.

Science.gov (United States)

del Río, Joaquín; Aguzzi, Jacopo; Costa, Corrado; Menesatti, Paolo; Sbragaglia, Valerio; Nogueras, Marc; Sarda, Francesc; Manuèl, Antoni

2013-10-30

Field measurements of the swimming activity rhythms of fishes are scant due to the difficulty of counting individuals at a high frequency over a long period of time. Cabled observatory video monitoring allows such a sampling at a high frequency over unlimited periods of time. Unfortunately, automation for the extraction of biological information (i.e., animals' visual counts per unit of time) is still a major bottleneck. In this study, we describe a new automated video-imaging protocol for the 24-h continuous counting of fishes in colorimetrically calibrated time-lapse photographic outputs, taken by a shallow water (20 m depth) cabled video-platform, the OBSEA. The spectral reflectance value for each patch was measured between 400 to 700 nm and then converted into standard RGB, used as a reference for all subsequent calibrations. All the images were acquired within a standardized Region Of Interest (ROI), represented by a 2 × 2 m methacrylate panel, endowed with a 9-colour calibration chart, and calibrated using the recently implemented "3D Thin-Plate Spline" warping approach in order to numerically define color by its coordinates in n-dimensional space. That operation was repeated on a subset of images, 500 images as a training set, manually selected since acquired under optimum visibility conditions. All images plus those for the training set were ordered together through Principal Component Analysis allowing the selection of 614 images (67.6%) out of 908 as a total corresponding to 18 days (at 30 min frequency). The Roberts operator (used in image processing and computer vision for edge detection) was used to highlights regions of high spatial colour gradient corresponding to fishes' bodies. Time series in manual and visual counts were compared together for efficiency evaluation. Periodogram and waveform analysis outputs provided very similar results, although quantified parameters in relation to the strength of respective rhythms were different. Results

A New Colorimetrically-Calibrated Automated Video-Imaging Protocol for Day-Night Fish Counting at the OBSEA Coastal Cabled Observatory

Directory of Open Access Journals (Sweden)

Joaquín del Río

2013-10-01

Full Text Available Field measurements of the swimming activity rhythms of fishes are scant due to the difficulty of counting individuals at a high frequency over a long period of time. Cabled observatory video monitoring allows such a sampling at a high frequency over unlimited periods of time. Unfortunately, automation for the extraction of biological information (i.e., animals’ visual counts per unit of time is still a major bottleneck. In this study, we describe a new automated video-imaging protocol for the 24-h continuous counting of fishes in colorimetrically calibrated time-lapse photographic outputs, taken by a shallow water (20 m depth cabled video-platform, the OBSEA. The spectral reflectance value for each patch was measured between 400 to 700 nm and then converted into standard RGB, used as a reference for all subsequent calibrations. All the images were acquired within a standardized Region Of Interest (ROI, represented by a 2 × 2 m methacrylate panel, endowed with a 9-colour calibration chart, and calibrated using the recently implemented “3D Thin-Plate Spline” warping approach in order to numerically define color by its coordinates in n-dimensional space. That operation was repeated on a subset of images, 500 images as a training set, manually selected since acquired under optimum visibility conditions. All images plus those for the training set were ordered together through Principal Component Analysis allowing the selection of 614 images (67.6% out of 908 as a total corresponding to 18 days (at 30 min frequency. The Roberts operator (used in image processing and computer vision for edge detection was used to highlights regions of high spatial colour gradient corresponding to fishes’ bodies. Time series in manual and visual counts were compared together for efficiency evaluation. Periodogram and waveform analysis outputs provided very similar results, although quantified parameters in relation to the strength of respective rhythms were

The Impact of Automation on Employment: Just the Usual Structural Change?

Directory of Open Access Journals (Sweden)

Ben Vermeulen

2018-05-01

Full Text Available We study the projected impact of automation on employment in the forthcoming decade, both at the macro-level and in actual (types of sectors. Hereto, we unite an evolutionary economic model of multisectoral structural change with labor economic theory. We thus get a comprehensive framework of how displacement of labor in sectors of application is compensated by intra- and intersectoral countervailing effects and notably mopped up by newly created, labor-intensive sectors. We use several reputable datasets with expert projections on employment in occupations affected by automation (and notably by the introduction of robotics and AI to pinpoint which and how sectors and occupations face employment shifts. This reveals how potential job loss due to automation in “applying” sectors is counterbalanced by job creation in “making” sectors as well in complementary and quaternary, spillover sectors. Finally, we study several macro-level scenarios on employment and find that mankind is facing “the usual structural change” rather than the “end of work”. We provide recommendations on policy instruments that enhance the dynamic efficiency of structural change.

Electroencephalography Amplitude Modulation Analysis for Automated Affective Tagging of Music Video Clips

Directory of Open Access Journals (Sweden)

Andrea Clerico

2018-01-01

Full Text Available The quantity of music content is rapidly increasing and automated affective tagging of music video clips can enable the development of intelligent retrieval, music recommendation, automatic playlist generators, and music browsing interfaces tuned to the users' current desires, preferences, or affective states. To achieve this goal, the field of affective computing has emerged, in particular the development of so-called affective brain-computer interfaces, which measure the user's affective state directly from measured brain waves using non-invasive tools, such as electroencephalography (EEG. Typically, conventional features extracted from the EEG signal have been used, such as frequency subband powers and/or inter-hemispheric power asymmetry indices. More recently, the coupling between EEG and peripheral physiological signals, such as the galvanic skin response (GSR, have also been proposed. Here, we show the importance of EEG amplitude modulations and propose several new features that measure the amplitude-amplitude cross-frequency coupling per EEG electrode, as well as linear and non-linear connections between multiple electrode pairs. When tested on a publicly available dataset of music video clips tagged with subjective affective ratings, support vector classifiers trained on the proposed features were shown to outperform those trained on conventional benchmark EEG features by as much as 6, 20, 8, and 7% for arousal, valence, dominance and liking, respectively. Moreover, fusion of the proposed features with EEG-GSR coupling features showed to be particularly useful for arousal (feature-level fusion and liking (decision-level fusion prediction. Together, these findings show the importance of the proposed features to characterize human affective states during music clip watching.

Using Stereo Vision to Support the Automated Analysis of Surveillance Videos

Science.gov (United States)

Menze, M.; Muhle, D.

2012-07-01

Video surveillance systems are no longer a collection of independent cameras, manually controlled by human operators. Instead, smart sensor networks are developed, able to fulfil certain tasks on their own and thus supporting security personnel by automated analyses. One well-known task is the derivation of people's positions on a given ground plane from monocular video footage. An improved accuracy for the ground position as well as a more detailed representation of single salient people can be expected from a stereoscopic processing of overlapping views. Related work mostly relies on dedicated stereo devices or camera pairs with a small baseline. While this set-up is helpful for the essential step of image matching, the high accuracy potential of a wide baseline and the according good intersection geometry is not utilised. In this paper we present a stereoscopic approach, working on overlapping views of standard pan-tilt-zoom cameras which can easily be generated for arbitrary points of interest by an appropriate reconfiguration of parts of a sensor network. Experiments are conducted on realistic surveillance footage to show the potential of the suggested approach and to investigate the influence of different baselines on the quality of the derived surface model. Promising estimations of people's position and height are retrieved. Although standard matching approaches show helpful results, future work will incorporate temporal dependencies available from image sequences in order to reduce computational effort and improve the derived level of detail.

USING STEREO VISION TO SUPPORT THE AUTOMATED ANALYSIS OF SURVEILLANCE VIDEOS

Directory of Open Access Journals (Sweden)

M. Menze

2012-07-01

Full Text Available Video surveillance systems are no longer a collection of independent cameras, manually controlled by human operators. Instead, smart sensor networks are developed, able to fulfil certain tasks on their own and thus supporting security personnel by automated analyses. One well-known task is the derivation of people’s positions on a given ground plane from monocular video footage. An improved accuracy for the ground position as well as a more detailed representation of single salient people can be expected from a stereoscopic processing of overlapping views. Related work mostly relies on dedicated stereo devices or camera pairs with a small baseline. While this set-up is helpful for the essential step of image matching, the high accuracy potential of a wide baseline and the according good intersection geometry is not utilised. In this paper we present a stereoscopic approach, working on overlapping views of standard pan-tilt-zoom cameras which can easily be generated for arbitrary points of interest by an appropriate reconfiguration of parts of a sensor network. Experiments are conducted on realistic surveillance footage to show the potential of the suggested approach and to investigate the influence of different baselines on the quality of the derived surface model. Promising estimations of people’s position and height are retrieved. Although standard matching approaches show helpful results, future work will incorporate temporal dependencies available from image sequences in order to reduce computational effort and improve the derived level of detail.

Automating usability of ATLAS distributed computing resources

International Nuclear Information System (INIS)

Tupputi, S A; Girolamo, A Di; Kouba, T; Schovancová, J

2014-01-01

The automation of ATLAS Distributed Computing (ADC) operations is essential to reduce manpower costs and allow performance-enhancing actions, which improve the reliability of the system. In this perspective a crucial case is the automatic handling of outages of ATLAS computing sites storage resources, which are continuously exploited at the edge of their capabilities. It is challenging to adopt unambiguous decision criteria for storage resources of non-homogeneous types, sizes and roles. The recently developed Storage Area Automatic Blacklisting (SAAB) tool has provided a suitable solution, by employing an inference algorithm which processes history of storage monitoring tests outcome. SAAB accomplishes both the tasks of providing global monitoring as well as automatic operations on single sites. The implementation of the SAAB tool has been the first step in a comprehensive review of the storage areas monitoring and central management at all levels. Such review has involved the reordering and optimization of SAM tests deployment and the inclusion of SAAB results in the ATLAS Site Status Board with both dedicated metrics and views. The resulting structure allows monitoring the storage resources status with fine time-granularity and automatic actions to be taken in foreseen cases, like automatic outage handling and notifications to sites. Hence, the human actions are restricted to reporting and following up problems, where and when needed. In this work we show SAAB working principles and features. We present also the decrease of human interactions achieved within the ATLAS Computing Operation team. The automation results in a prompt reaction to failures, which leads to the optimization of resource exploitation.

Video-Quality Estimation Based on Reduced-Reference Model Employing Activity-Difference

Science.gov (United States)

Yamada, Toru; Miyamoto, Yoshihiro; Senda, Yuzo; Serizawa, Masahiro

This paper presents a Reduced-reference based video-quality estimation method suitable for individual end-user quality monitoring of IPTV services. With the proposed method, the activity values for individual given-size pixel blocks of an original video are transmitted to end-user terminals. At the end-user terminals, the video quality of a received video is estimated on the basis of the activity-difference between the original video and the received video. Psychovisual weightings and video-quality score adjustments for fatal degradations are applied to improve estimation accuracy. In addition, low-bit-rate transmission is achieved by using temporal sub-sampling and by transmitting only the lower six bits of each activity value. The proposed method achieves accurate video quality estimation using only low-bit-rate original video information (15kbps for SDTV). The correlation coefficient between actual subjective video quality and estimated quality is 0.901 with 15kbps side information. The proposed method does not need computationally demanding spatial and gain-and-offset registrations. Therefore, it is suitable for real-time video-quality monitoring in IPTV services.

Learning based on library automation in mobile devices: The video production by students of Universidade Federal do Cariri Library Science Undergraduate Degree

Directory of Open Access Journals (Sweden)

David Vernon VIEIRA

Full Text Available Abstract The video production for learning has been evident over the last few years especially when it involves aspects of the application of hardware and software for automation spaces. In Librarianship Undergraduate Degrees the need for practical learning focused on the knowledge of the requirements for library automation demand on teacher to develop an educational content to enable the student to learn through videos in order to increase the knowledge about information technology. Thus, discusses the possibilities of learning through mobile devices in education reporting an experience that took place with students who entered in March, 2015 (2015.1 Bachelor Degree in Library Science from the Universidade Federal do Cariri (Federal University of Cariri in state of Ceará, Brazil. The literature review includes articles publicated in scientific journals and conference proceedings and books in English, Portuguese and Spanish on the subject. The methodology with quantitative and qualitative approach includes an exploratory study, where the data collection was used online survey to find out the experience of the elaboration of library automation videos by students who studied in that course. The learning experience using mobile devices for recording of technological environments of libraries allowed them to be produced 25 videos that contemplated aspects of library automation having these actively participated in production of the video and its publication on the Internet.

Predictive no-reference assessment of video quality

NARCIS (Netherlands)

Torres Vega, M.; Mocanu, D.C.; Stavrou, S.; Liotta, A.

2017-01-01

Among the various means to evaluate the quality of video streams, light-weight No-Reference (NR) methods have low computation and may be executed on thin clients. Thus, these methods would be perfect candidates in cases of real-time quality assessment, automated quality control and in adaptive

Open Educational Resources: The Role of OCW, Blogs and Videos in Computer Networks Classroom

Directory of Open Access Journals (Sweden)

Pablo Gil

2012-09-01

Full Text Available This paper analyzes the learning experiences and opinions obtained from a group of undergraduate students in their interaction with several on-line multimedia resources included in a free on-line course about Computer Networks. These new educational resources employed are based on the Web2.0 approach such as blogs, videos and virtual labs which have been added in a web-site for distance self-learning.

Design considerations for computationally constrained two-way real-time video communication

Science.gov (United States)

Bivolarski, Lazar M.; Saunders, Steven E.; Ralston, John D.

2009-08-01

Today's video codecs have evolved primarily to meet the requirements of the motion picture and broadcast industries, where high-complexity studio encoding can be utilized to create highly-compressed master copies that are then broadcast one-way for playback using less-expensive, lower-complexity consumer devices for decoding and playback. Related standards activities have largely ignored the computational complexity and bandwidth constraints of wireless or Internet based real-time video communications using devices such as cell phones or webcams. Telecommunications industry efforts to develop and standardize video codecs for applications such as video telephony and video conferencing have not yielded image size, quality, and frame-rate performance that match today's consumer expectations and market requirements for Internet and mobile video services. This paper reviews the constraints and the corresponding video codec requirements imposed by real-time, 2-way mobile video applications. Several promising elements of a new mobile video codec architecture are identified, and more comprehensive computational complexity metrics and video quality metrics are proposed in order to support the design, testing, and standardization of these new mobile video codecs.

Automation, Computerisation and Future Employment in Singapore

OpenAIRE

Lee, King Fuei

2016-01-01

Digitalization is expected to radically change the prospects of the types of occupations that will be needed in the future. This research note examines the susceptibility of jobs to computerization and automation in Singapore by drawing on the methodology and initial data in Frey and Osborne (2013). We find that about one-quarter of Singaporean employment is at high risk of computerization. This places the country as having one of the lowest proportions of jobs under high risk internationally...

Logistics Automation Master Plan (LAMP). Better Logistics Support through Automation.

Science.gov (United States)

1983-06-01

productivity and efficiency of DARCOM human resources through the design, development, and deployment of workspace automation tools. 16. Develop Area Oriented...See Resource Annex Budgeted and Programed Resources by FY: See Resource Annex Actual or Planned Source of Resources: See Resourece Annex. Purpose and...screen, video disc machine and a microcomputer. Pressure from a human hand or light per on the user friendly screen tells the computer to retrieve

Computer-Aided Instruction in Automated Instrumentation.

Science.gov (United States)

Stephenson, David T.

1986-01-01

Discusses functions of automated instrumentation systems, i.e., systems which combine electrical measuring instruments and a controlling computer to measure responses of a unit under test. The computer-assisted tutorial then described is programmed for use on such a system--a modern microwave spectrum analyzer--to introduce engineering students to…

Automated validation of a computer operating system

Science.gov (United States)

Dervage, M. M.; Milberg, B. A.

1970-01-01

Programs apply selected input/output loads to complex computer operating system and measure performance of that system under such loads. Technique lends itself to checkout of computer software designed to monitor automated complex industrial systems.

Automated, computer interpreted radioimmunoassay results

International Nuclear Information System (INIS)

Hill, J.C.; Nagle, C.E.; Dworkin, H.J.; Fink-Bennett, D.; Freitas, J.E.; Wetzel, R.; Sawyer, N.; Ferry, D.; Hershberger, D.

1984-01-01

90,000 Radioimmunoassay results have been interpreted and transcribed automatically using software developed for use on a Hewlett Packard Model 1000 mini-computer system with conventional dot matrix printers. The computer program correlates the results of a combination of assays, interprets them and prints a report ready for physician review and signature within minutes of completion of the assay. The authors designed and wrote a computer program to query their patient data base for radioassay laboratory results and to produce a computer generated interpretation of these results using an algorithm that produces normal and abnormal interpretives. Their laboratory assays 50,000 patient samples each year using 28 different radioassays. Of these 85% have been interpreted using our computer program. Allowances are made for drug and patient history and individualized reports are generated with regard to the patients age and sex. Finalization of reports is still subject to change by the nuclear physician at the time of final review. Automated, computerized interpretations have realized cost savings through reduced personnel and personnel time and provided uniformity of the interpretations among the five physicians. Prior to computerization of interpretations, all radioassay results had to be dictated and reviewed for signing by one of the resident or staff physicians. Turn around times for reports prior to the automated computer program generally were two to three days. Whereas, the computerized interpret system allows reports to generally be issued the day assays are completed

Personal computer based home automation system

OpenAIRE

Hellmuth, George F.

1993-01-01

The systems engineering process is applied in the development of the preliminary design of a home automation communication protocol. The objective of the communication protocol is to provide a means for a personal computer to communicate with adapted appliances in the home. A needs analysis is used to ascertain that a need exist for a home automation system. Numerous design alternatives are suggested and evaluated to determine the best possible protocol design. Coaxial cable...

Optimization of video capturing and tone mapping in video camera systems

NARCIS (Netherlands)

Cvetkovic, S.D.

2011-01-01

Image enhancement techniques are widely employed in many areas of professional and consumer imaging, machine vision and computational imaging. Image enhancement techniques used in surveillance video cameras are complex systems involving controllable lenses, sensors and advanced signal processing. In

Computer automation in veterinary hospitals.

Science.gov (United States)

Rogers, H

1996-05-01

Computers have been used to automate complex and repetitive tasks in veterinary hospitals since the 1960s. Early systems were expensive, but their use was justified because they performed jobs which would have been impossible or which would have required greater resources in terms of time and personnel had they been performed by other methods. Systems found in most veterinary hospitals today are less costly, magnitudes more capable, and often underused. Modern multitasking operating systems and graphical interfaces bring many opportunities for automation. Commercial and custom programs developed and used in a typical multidoctor mixed species veterinary practice are described.

Automating sensitivity analysis of computer models using computer calculus

International Nuclear Information System (INIS)

Oblow, E.M.; Pin, F.G.

1985-01-01

An automated procedure for performing sensitivity analyses has been developed. The procedure uses a new FORTRAN compiler with computer calculus capabilities to generate the derivatives needed to set up sensitivity equations. The new compiler is called GRESS - Gradient Enhanced Software System. Application of the automated procedure with ''direct'' and ''adjoint'' sensitivity theory for the analysis of non-linear, iterative systems of equations is discussed. Calculational efficiency consideration and techniques for adjoint sensitivity analysis are emphasized. The new approach is found to preserve the traditional advantages of adjoint theory while removing the tedious human effort previously needed to apply this theoretical methodology. Conclusions are drawn about the applicability of the automated procedure in numerical analysis and large-scale modelling sensitivity studies. 24 refs., 2 figs

Automating sensitivity analysis of computer models using computer calculus

International Nuclear Information System (INIS)

Oblow, E.M.; Pin, F.G.

1986-01-01

An automated procedure for performing sensitivity analysis has been developed. The procedure uses a new FORTRAN compiler with computer calculus capabilities to generate the derivatives needed to set up sensitivity equations. The new compiler is called GRESS - Gradient Enhanced Software System. Application of the automated procedure with direct and adjoint sensitivity theory for the analysis of non-linear, iterative systems of equations is discussed. Calculational efficiency consideration and techniques for adjoint sensitivity analysis are emphasized. The new approach is found to preserve the traditional advantages of adjoint theory while removing the tedious human effort previously needed to apply this theoretical methodology. Conclusions are drawn about the applicability of the automated procedure in numerical analysis and large-scale modelling sensitivity studies

Scalable gastroscopic video summarization via similar-inhibition dictionary selection.

Science.gov (United States)

Wang, Shuai; Cong, Yang; Cao, Jun; Yang, Yunsheng; Tang, Yandong; Zhao, Huaici; Yu, Haibin

2016-01-01

This paper aims at developing an automated gastroscopic video summarization algorithm to assist clinicians to more effectively go through the abnormal contents of the video. To select the most representative frames from the original video sequence, we formulate the problem of gastroscopic video summarization as a dictionary selection issue. Different from the traditional dictionary selection methods, which take into account only the number and reconstruction ability of selected key frames, our model introduces the similar-inhibition constraint to reinforce the diversity of selected key frames. We calculate the attention cost by merging both gaze and content change into a prior cue to help select the frames with more high-level semantic information. Moreover, we adopt an image quality evaluation process to eliminate the interference of the poor quality images and a segmentation process to reduce the computational complexity. For experiments, we build a new gastroscopic video dataset captured from 30 volunteers with more than 400k images and compare our method with the state-of-the-arts using the content consistency, index consistency and content-index consistency with the ground truth. Compared with all competitors, our method obtains the best results in 23 of 30 videos evaluated based on content consistency, 24 of 30 videos evaluated based on index consistency and all videos evaluated based on content-index consistency. For gastroscopic video summarization, we propose an automated annotation method via similar-inhibition dictionary selection. Our model can achieve better performance compared with other state-of-the-art models and supplies more suitable key frames for diagnosis. The developed algorithm can be automatically adapted to various real applications, such as the training of young clinicians, computer-aided diagnosis or medical report generation. Copyright © 2015 Elsevier B.V. All rights reserved.

Computer-generated video fly-through: an aid to visual impact assessment for windfarms

International Nuclear Information System (INIS)

Neilson, G.; Leeming, T.; Hall, S.

1998-01-01

Computer generated video fly-through provides a new method of assessing the visual impact of wind farms. With a PC, software and digital terrain model of the wind farm it is possible to produce videos ranging from wireframe to realistically shaded models. Using computer generated video fly-through visually sensitive corridors can be explored fully, wind turbine rotors can be seen in motion, critical viewpoints can be identified for photomontages and the context of the wind farm appreciated better. This paper describes the techniques of computer generated video fly through and examines its various applications in visual impact assessment of wind farms. (Author)

Automated UAV-based video exploitation using service oriented architecture framework

Science.gov (United States)

Se, Stephen; Nadeau, Christian; Wood, Scott

2011-05-01

Airborne surveillance and reconnaissance are essential for successful military missions. Such capabilities are critical for troop protection, situational awareness, mission planning, damage assessment, and others. Unmanned Aerial Vehicles (UAVs) gather huge amounts of video data but it is extremely labour-intensive for operators to analyze hours and hours of received data. At MDA, we have developed a suite of tools that can process the UAV video data automatically, including mosaicking, change detection and 3D reconstruction, which have been integrated within a standard GIS framework. In addition, the mosaicking and 3D reconstruction tools have also been integrated in a Service Oriented Architecture (SOA) framework. The Visualization and Exploitation Workstation (VIEW) integrates 2D and 3D visualization, processing, and analysis capabilities developed for UAV video exploitation. Visualization capabilities are supported through a thick-client Graphical User Interface (GUI), which allows visualization of 2D imagery, video, and 3D models. The GUI interacts with the VIEW server, which provides video mosaicking and 3D reconstruction exploitation services through the SOA framework. The SOA framework allows multiple users to perform video exploitation by running a GUI client on the operator's computer and invoking the video exploitation functionalities residing on the server. This allows the exploitation services to be upgraded easily and allows the intensive video processing to run on powerful workstations. MDA provides UAV services to the Canadian and Australian forces in Afghanistan with the Heron, a Medium Altitude Long Endurance (MALE) UAV system. On-going flight operations service provides important intelligence, surveillance, and reconnaissance information to commanders and front-line soldiers.

Intelligent trainee behavior assessment system for medical training employing video analysis

NARCIS (Netherlands)

Han, Jungong; With, de P.H.N.; Merién, A.E.R.; Oei, S.G.

2012-01-01

This paper addresses the problem of assessing a trainee’s performance during a simulated delivery training by employing automatic analysis of a video camera signal. We aim at providing objective statistics reflecting the trainee’s behavior, so that the instructor is able to give valuable suggestions

Computer automation of a dilution cryogenic system

International Nuclear Information System (INIS)

Nogues, C.

1992-09-01

This study has been realized in the framework of studies on developing new technic for low temperature detectors for neutrinos and dark matter. The principles of low temperature physics and helium 4 and dilution cryostats, are first reviewed. The cryogenic system used and the technic for low temperature thermometry and regulation systems are then described. The computer automation of the dilution cryogenic system involves: numerical measurement of the parameter set (pressure, temperature, flow rate); computer assisted operating of the cryostat and the pump bench; numerical regulation of pressure and temperature; operation sequence full automation allowing the system to evolve from a state to another (temperature descent for example)

Collaborative real-time motion video analysis by human observer and image exploitation algorithms

Science.gov (United States)

Hild, Jutta; Krüger, Wolfgang; Brüstle, Stefan; Trantelle, Patrick; Unmüßig, Gabriel; Heinze, Norbert; Peinsipp-Byma, Elisabeth; Beyerer, Jürgen

2015-05-01

Motion video analysis is a challenging task, especially in real-time applications. In most safety and security critical applications, a human observer is an obligatory part of the overall analysis system. Over the last years, substantial progress has been made in the development of automated image exploitation algorithms. Hence, we investigate how the benefits of automated video analysis can be integrated suitably into the current video exploitation systems. In this paper, a system design is introduced which strives to combine both the qualities of the human observer's perception and the automated algorithms, thus aiming to improve the overall performance of a real-time video analysis system. The system design builds on prior work where we showed the benefits for the human observer by means of a user interface which utilizes the human visual focus of attention revealed by the eye gaze direction for interaction with the image exploitation system; eye tracker-based interaction allows much faster, more convenient, and equally precise moving target acquisition in video images than traditional computer mouse selection. The system design also builds on prior work we did on automated target detection, segmentation, and tracking algorithms. Beside the system design, a first pilot study is presented, where we investigated how the participants (all non-experts in video analysis) performed in initializing an object tracking subsystem by selecting a target for tracking. Preliminary results show that the gaze + key press technique is an effective, efficient, and easy to use interaction technique when performing selection operations on moving targets in videos in order to initialize an object tracking function.

Multimodal interaction in image and video applications

CERN Document Server

Sappa, Angel D

2013-01-01

Traditional Pattern Recognition (PR) and Computer Vision (CV) technologies have mainly focused on full automation, even though full automation often proves elusive or unnatural in many applications, where the technology is expected to assist rather than replace the human agents. However, not all the problems can be automatically solved being the human interaction the only way to tackle those applications. Recently, multimodal human interaction has become an important field of increasing interest in the research community. Advanced man-machine interfaces with high cognitive capabilities are a hot research topic that aims at solving challenging problems in image and video applications. Actually, the idea of computer interactive systems was already proposed on the early stages of computer science. Nowadays, the ubiquity of image sensors together with the ever-increasing computing performance has open new and challenging opportunities for research in multimodal human interaction. This book aims to show how existi...

Virtually compliant: Immersive video gaming increases conformity to false computer judgments.

Science.gov (United States)

Weger, Ulrich W; Loughnan, Stephen; Sharma, Dinkar; Gonidis, Lazaros

2015-08-01

Real-life encounters with face-to-face contact are on the decline in a world in which many routine tasks are delegated to virtual characters-a development that bears both opportunities and risks. Interacting with such virtual-reality beings is particularly common during role-playing videogames, in which we incarnate into the virtual reality of an avatar. Video gaming is known to lead to the training and development of real-life skills and behaviors; hence, in the present study we sought to explore whether role-playing video gaming primes individuals' identification with a computer enough to increase computer-related social conformity. Following immersive video gaming, individuals were indeed more likely to give up their own best judgment and to follow the vote of computers, especially when the stimulus context was ambiguous. Implications for human-computer interactions and for our understanding of the formation of identity and self-concept are discussed.

Possible Computer Vision Systems and Automated or Computer-Aided Edging and Trimming

Science.gov (United States)

Philip A. Araman

1990-01-01

This paper discusses research which is underway to help our industry reduce costs, increase product volume and value recovery, and market more accurately graded and described products. The research is part of a team effort to help the hardwood sawmill industry automate with computer vision systems, and computer-aided or computer controlled processing. This paper...

Visual Attention Modeling for Stereoscopic Video: A Benchmark and Computational Model.

Science.gov (United States)

Fang, Yuming; Zhang, Chi; Li, Jing; Lei, Jianjun; Perreira Da Silva, Matthieu; Le Callet, Patrick

2017-10-01

In this paper, we investigate the visual attention modeling for stereoscopic video from the following two aspects. First, we build one large-scale eye tracking database as the benchmark of visual attention modeling for stereoscopic video. The database includes 47 video sequences and their corresponding eye fixation data. Second, we propose a novel computational model of visual attention for stereoscopic video based on Gestalt theory. In the proposed model, we extract the low-level features, including luminance, color, texture, and depth, from discrete cosine transform coefficients, which are used to calculate feature contrast for the spatial saliency computation. The temporal saliency is calculated by the motion contrast from the planar and depth motion features in the stereoscopic video sequences. The final saliency is estimated by fusing the spatial and temporal saliency with uncertainty weighting, which is estimated by the laws of proximity, continuity, and common fate in Gestalt theory. Experimental results show that the proposed method outperforms the state-of-the-art stereoscopic video saliency detection models on our built large-scale eye tracking database and one other database (DML-ITRACK-3D).

Automated Analysis of Facial Cues from Videos as a Potential Method for Differentiating Stress and Boredom of Players in Games

Directory of Open Access Journals (Sweden)

Fernando Bevilacqua

2018-01-01

Full Text Available Facial analysis is a promising approach to detect emotions of players unobtrusively; however approaches are commonly evaluated in contexts not related to games or facial cues are derived from models not designed for analysis of emotions during interactions with games. We present a method for automated analysis of facial cues from videos as a potential tool for detecting stress and boredom of players behaving naturally while playing games. Computer vision is used to automatically and unobtrusively extract 7 facial features aimed at detecting the activity of a set of facial muscles. Features are mainly based on the Euclidean distance of facial landmarks and do not rely on predefined facial expressions, training of a model, or the use of facial standards. An empirical evaluation was conducted on video recordings of an experiment involving games as emotion elicitation sources. Results show statistically significant differences in the values of facial features during boring and stressful periods of gameplay for 5 of the 7 features. We believe our approach is more user-tailored, convenient, and better suited for contexts involving games.

Development and Assessment of a Chemistry-Based Computer Video Game as a Learning Tool

Science.gov (United States)

Martinez-Hernandez, Kermin Joel

2010-01-01

The chemistry-based computer video game is a multidisciplinary collaboration between chemistry and computer graphics and technology fields developed to explore the use of video games as a possible learning tool. This innovative approach aims to integrate elements of commercial video game and authentic chemistry context environments into a learning…

Automated procedure for performing computer security risk analysis

International Nuclear Information System (INIS)

Smith, S.T.; Lim, J.J.

1984-05-01

Computers, the invisible backbone of nuclear safeguards, monitor and control plant operations and support many materials accounting systems. Our automated procedure to assess computer security effectiveness differs from traditional risk analysis methods. The system is modeled as an interactive questionnaire, fully automated on a portable microcomputer. A set of modular event trees links the questionnaire to the risk assessment. Qualitative scores are obtained for target vulnerability, and qualitative impact measures are evaluated for a spectrum of threat-target pairs. These are then combined by a linguistic algebra to provide an accurate and meaningful risk measure. 12 references, 7 figures

Computer-Based Video Instruction to Teach the Use of Augmentative and Alternative Communication Devices for Ordering at Fast-Food Restaurants

Science.gov (United States)

Mechling, Linda C.; Cronin, Beth

2006-01-01

In the study reported on here, the authors used computer-based video instruction (CBVI) to teach 3 high school students with moderate or severe intellectual disabilities how to order in fast-food restaurants by using an augmentative, alternative communication device. The study employed a multiple probe design to institute CBVI as the only…

Automated computation of autonomous spectral submanifolds for nonlinear modal analysis

Science.gov (United States)

Ponsioen, Sten; Pedergnana, Tiemo; Haller, George

2018-04-01

We discuss an automated computational methodology for computing two-dimensional spectral submanifolds (SSMs) in autonomous nonlinear mechanical systems of arbitrary degrees of freedom. In our algorithm, SSMs, the smoothest nonlinear continuations of modal subspaces of the linearized system, are constructed up to arbitrary orders of accuracy, using the parameterization method. An advantage of this approach is that the construction of the SSMs does not break down when the SSM folds over its underlying spectral subspace. A further advantage is an automated a posteriori error estimation feature that enables a systematic increase in the orders of the SSM computation until the required accuracy is reached. We find that the present algorithm provides a major speed-up, relative to numerical continuation methods, in the computation of backbone curves, especially in higher-dimensional problems. We illustrate the accuracy and speed of the automated SSM algorithm on lower- and higher-dimensional mechanical systems.

Automated computer analysis of plasma-streak traces from SCYLLAC

International Nuclear Information System (INIS)

Whitman, R.L.; Jahoda, F.C.; Kruger, R.P.

1977-01-01

An automated computer analysis technique that locates and references the approximate centroid of single- or dual-streak traces from the Los Alamos Scientific Laboratory SCYLLAC facility is described. The technique also determines the plasma-trace width over a limited self-adjusting region. The plasma traces are recorded with streak cameras on Polaroid film, then scanned and digitized for processing. The analysis technique uses scene segmentation to separate the plasma trace from a reference fiducial trace. The technique employs two methods of peak detection; one for the plasma trace and one for the fiducial trace. The width is obtained using an edge-detection, or slope, method. Timing data are derived from the intensity modulation of the fiducial trace. To smooth (despike) the output graphs showing the plasma-trace centroid and width, a technique of ''twicing'' developed by Tukey was employed. In addition, an interactive sorting algorithm allows retrieval of the centroid, width, and fiducial data from any test shot plasma for post analysis. As yet, only a limited set of sixteen plasma traces has been processed using this technique

Automated computer analysis of plasma-streak traces from SCYLLAC

International Nuclear Information System (INIS)

Whiteman, R.L.; Jahoda, F.C.; Kruger, R.P.

1977-11-01

An automated computer analysis technique that locates and references the approximate centroid of single- or dual-streak traces from the Los Alamos Scientific Laboratory SCYLLAC facility is described. The technique also determines the plasma-trace width over a limited self-adjusting region. The plasma traces are recorded with streak cameras on Polaroid film, then scanned and digitized for processing. The analysis technique uses scene segmentation to separate the plasma trace from a reference fiducial trace. The technique employs two methods of peak detection; one for the plasma trace and one for the fiducial trace. The width is obtained using an edge-detection, or slope, method. Timing data are derived from the intensity modulation of the fiducial trace. To smooth (despike) the output graphs showing the plasma-trace centroid and width, a technique of ''twicing'' developed by Tukey was employed. In addition, an interactive sorting algorithm allows retrieval of the centroid, width, and fiducial data from any test shot plasma for post analysis. As yet, only a limited set of the plasma traces has been processed with this technique

Computer simulation of orthognathic surgery with video imaging

Science.gov (United States)

Sader, Robert; Zeilhofer, Hans-Florian U.; Horch, Hans-Henning

1994-04-01

Patients with extreme jaw imbalance must often undergo operative corrections. The goal of therapy is to harmonize the stomatognathic system and an aesthetical correction of the face profile. A new procedure will be presented which supports the maxillo-facial surgeon in planning the operation and which also presents the patient the result of the treatment by video images. Once an x-ray has been digitized it is possible to produce individualized cephalometric analyses. Using a ceph on screen, all current orthognathic operations can be simulated, whereby the bony segments are moved according to given parameters, and a new soft tissue profile can be calculated. The profile of the patient is fed into the computer by way of a video system and correlated to the ceph. Using the simulated operation the computer calculates a new video image of the patient which presents the expected postoperative appearance. In studies of patients treated between 1987-91, 76 out of 121 patients were able to be evaluated. The deviation in profile change varied between .0 and 1.6mm. A side effect of the practical applications was an increase in patient compliance.

Gender and computer games / video games : girls’ perspective orientation

OpenAIRE

Yan, Jingjing

2010-01-01

The topic of this thesis is “Gender Differences in Computer games/ Video games Industry”. Due to rapid development in technology and popularization of computers all around the world, computer games have already become a kind of common entertainment. Because computer games were designed especially for boys at the very beginning, there are still some remaining barriers when training female game designers and expanding game markets among female players.This thesis is mainly based on two studies ...

Honeywell modular automation system computer software documentation

International Nuclear Information System (INIS)

Cunningham, L.T.

1997-01-01

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-21I

Automated music selection of video ads

Directory of Open Access Journals (Sweden)

Wiesener Oliver

2017-07-01

Full Text Available The importance of video ads on social media platforms can be measured by views. For instance, Samsung’s commercial ad for one of its new smartphones reached more than 46 million viewers at Youtube. A video ad addresses the visual as well as the auditive sense of users. Often the visual sense is busy in the sense that users focus other screens than the screen with the video ad. This is called the second screen syndrome. Therefore, the importance of the audio channel seems to grow. To get back the visual attention of users that are deflected from other visual impulses it appears reasonable to adapt the music to the target group. Additionally, it appears useful to adapt the music to content of the video. Thus, the overall success of a video ad could by increased by increasing the attention of the users. Humans typically make the decision about the music of a video ad. If there is a correlation between music, products and target groups, a digitization of the music selection process seems to be possible. Since the digitization progress in the music sector is mainly focused on music composing this article strives for making a first step towards the digitization of the music selection.

Learning Computational Models of Video Memorability from fMRI Brain Imaging.

Science.gov (United States)

Han, Junwei; Chen, Changyuan; Shao, Ling; Hu, Xintao; Han, Jungong; Liu, Tianming

2015-08-01

Generally, various visual media are unequally memorable by the human brain. This paper looks into a new direction of modeling the memorability of video clips and automatically predicting how memorable they are by learning from brain functional magnetic resonance imaging (fMRI). We propose a novel computational framework by integrating the power of low-level audiovisual features and brain activity decoding via fMRI. Initially, a user study experiment is performed to create a ground truth database for measuring video memorability and a set of effective low-level audiovisual features is examined in this database. Then, human subjects' brain fMRI data are obtained when they are watching the video clips. The fMRI-derived features that convey the brain activity of memorizing videos are extracted using a universal brain reference system. Finally, due to the fact that fMRI scanning is expensive and time-consuming, a computational model is learned on our benchmark dataset with the objective of maximizing the correlation between the low-level audiovisual features and the fMRI-derived features using joint subspace learning. The learned model can then automatically predict the memorability of videos without fMRI scans. Evaluations on publically available image and video databases demonstrate the effectiveness of the proposed framework.

Efficient Temporal Action Localization in Videos

KAUST Repository

Alwassel, Humam

2018-04-17

State-of-the-art temporal action detectors inefficiently search the entire video for specific actions. Despite the encouraging progress these methods achieve, it is crucial to design automated approaches that only explore parts of the video which are the most relevant to the actions being searched. To address this need, we propose the new problem of action spotting in videos, which we define as finding a specific action in a video while observing a small portion of that video. Inspired by the observation that humans are extremely efficient and accurate in spotting and finding action instances in a video, we propose Action Search, a novel Recurrent Neural Network approach that mimics the way humans spot actions. Moreover, to address the absence of data recording the behavior of human annotators, we put forward the Human Searches dataset, which compiles the search sequences employed by human annotators spotting actions in the AVA and THUMOS14 datasets. We consider temporal action localization as an application of the action spotting problem. Experiments on the THUMOS14 dataset reveal that our model is not only able to explore the video efficiently (observing on average 17.3% of the video) but it also accurately finds human activities with 30.8% mAP (0.5 tIoU), outperforming state-of-the-art methods

Automated Indexing and Search of Video Data in Large Collections with inVideo

Directory of Open Access Journals (Sweden)

Shuangbao Paul Wang

2017-08-01

Full Text Available In this paper, we present a novel system, inVideo, for automatically indexing and searching videos based on the keywords spoken in the audio track and the visual content of the video frames. Using the highly efficient video indexing engine we developed, inVideo is able to analyze videos using machine learning and pattern recognition without the need for initial viewing by a human. The time-stamped commenting and tagging features refine the accuracy of search results. The cloud-based implementation makes it possible to conduct elastic search, augmented search, and data analytics. Our research shows that inVideo presents an efficient tool in processing and analyzing videos and increasing interactions in video-based online learning environment. Data from a cybersecurity program with more than 500 students show that applying inVideo to current video material, interactions between student-student and student-faculty increased significantly across 24 sections program-wide.

Model Checking - Automated Verification of Computational Systems

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 7. Model Checking - Automated Verification of Computational Systems. Madhavan Mukund. General Article Volume 14 Issue 7 July 2009 pp 667-681. Fulltext. Click here to view fulltext PDF. Permanent link:

An observer study comparing spot imaging regions selected by radiologists and a computer for an automated stereo spot mammography technique

International Nuclear Information System (INIS)

Goodsitt, Mitchell M.; Chan, Heang-Ping; Lydick, Justin T.; Gandra, Chaitanya R.; Chen, Nelson G.; Helvie, Mark A.; Bailey, Janet E.; Roubidoux, Marilyn A.; Paramagul, Chintana; Blane, Caroline E.; Sahiner, Berkman; Petrick, Nicholas A.

2004-01-01

We are developing an automated stereo spot mammography technique for improved imaging of suspicious dense regions within digital mammograms. The technique entails the acquisition of a full-field digital mammogram, automated detection of a suspicious dense region within that mammogram by a computer aided detection (CAD) program, and acquisition of a stereo pair of images with automated collimation to the suspicious region. The latter stereo spot image is obtained within seconds of the original full-field mammogram, without releasing the compression paddle. The spot image is viewed on a stereo video display. A critical element of this technique is the automated detection of suspicious regions for spot imaging. We performed an observer study to compare the suspicious regions selected by radiologists with those selected by a CAD program developed at the University of Michigan. True regions of interest (TROIs) were separately determined by one of the radiologists who reviewed the original mammograms, biopsy images, and histology results. We compared the radiologist and computer-selected regions of interest (ROIs) to the TROIs. Both the radiologists and the computer were allowed to select up to 3 regions in each of 200 images (mixture of 100 CC and 100 MLO views). We computed overlap indices (the overlap index is defined as the ratio of the area of intersection to the area of interest) to quantify the agreement between the selected regions in each image. The averages of the largest overlap indices per image for the 5 radiologist-to-computer comparisons were directly related to the average number of regions per image traced by the radiologists (about 50% for 1 region/image, 84% for 2 regions/image and 96% for 3 regions/image). The average of the overlap indices with all of the TROIs was 73% for CAD and 76.8%+/-10.0% for the radiologists. This study indicates that the CAD determined ROIs could potentially be useful for a screening technique that includes stereo spot

A software for computer automated radioactive particle tracking

International Nuclear Information System (INIS)

Vieira, Wilson S.; Brandao, Luis E.; Braz, Delson

2008-01-01

TRACO-1 is the first software developed in Brazil for optimization and diagnosis of multiphase chemical reactors employing the technique known as 'Computer Automated Radioactive Particle Tracking' whose main idea is to follow the movement of a punctual radioactive particle inside a vessel. Considering that this particle has a behavior similar of the phase under investigation, important conclusions can be achieved. As a preliminary TRACO-1 evaluation, a simulation was carried out with the aid of a commercial software called MICROSHIELD, version 5.05, to obtain values of photon counting rates at four detector surfaces. These counting were related to the emission of gamma radiation from a radioactive source because they are the main TRACO-1 input variables. Although the results that has been found are incipient, the analysis of them suggest that the tracking of a radioactive source using TRACO- 1 can be well succeed, but a better evaluation of the capabilities of this software will only be achieved after its application in real experiments. (author)

Employing Inquiry-Based Computer Simulations and Embedded Scientist Videos To Teach Challenging Climate Change and Nature of Science Concepts

Science.gov (United States)

Cohen, E.

2013-12-01

Design based research was utilized to investigate how students use a greenhouse effect simulation in order to derive best learning practices. During this process, students recognized the authentic scientific process involving computer simulations. The simulation used is embedded within an inquiry-based technology-mediated science curriculum known as Web-based Inquiry Science Environment (WISE). For this research, students from a suburban, diverse, middle school setting use the simulations as part of a two week-long class unit on climate change. A pilot study was conducted during phase one of the research that informed phase two, which encompasses the dissertation. During the pilot study, as students worked through the simulation, evidence of shifts in student motivation, understanding of science content, and ideas about the nature of science became present using a combination of student interviews, focus groups, and students' conversations. Outcomes of the pilot study included improvements to the pedagogical approach. Allowing students to do 'Extreme Testing' (e.g., making the world as hot or cold as possible) and increasing the time for free exploration of the simulation are improvements made as a result of the findings of the pilot study. In the dissertation (phase two of the research design) these findings were implemented in a new curriculum scaled for 85 new students from the same school during the next school year. The modifications included new components implementing simulations as an assessment tool for all students and embedded modeling tools. All students were asked to build pre and post models, however due to technological constraints these were not an effective tool. A non-video group of 44 students was established and another group of 41 video students had a WISE curriculum which included twelve minutes of scientists' conversational videos referencing explicit aspects on the nature of science, specifically the use of models and simulations in science

Security training with interactive laser-video-disk technology

International Nuclear Information System (INIS)

Wilson, D.

1988-01-01

DOE, through its contractor EG and G Energy Measurements, Inc., has developed a state-of-the-art interactive-video system for use at the Department of Energy's Central Training Academy. Called the Security Training and Evaluation Shooting System (STRESS), the computer-driven decision shooting system employs the latest is laservideo-disk technology. STRESS is designed to provide realistic and stressful training for security inspectors employed by the DOE and its contractors. The system uses wide-screen video projection, sophisticated scenario-branching technology, and customized video scenarios especially designed for the DOE. Firing a weapon that has been modified to shoot ''laser bullets,'' and wearing a special vest that detects ''hits'': the security inspector encounters adversaries on the wide screen who can shoot or be shot by the inspector in scenarios that demand fast decisions. Based on those decisions, the computer provides instantaneous branching to different scenes, giving the inspector confrontational training with the realism and variability of real life

Rad World -- computer-animated video radiation and hazardous waste-management science curriculum

International Nuclear Information System (INIS)

Powell, B.

1996-01-01

The Rad World computer-animated video and curriculum materials were developed through a grant from the Waste-management Education and Research Consortium. The package, which includes a computer-animated video, hands-on activities, and multidisciplinary lessons concerning radiation and hazardous-waste management, was created to approach these subjects in an informative, yet entertaining, manner. The lessons and video, designed to supplement studies of energy and physical science at the middle school and high school level, also implement quality and consistent science education as outlined by the New Mexico Science Standards and Benchmarks (1995). Consistent with the curriculum standards and benchmarks, the curriculum includes library research, collaborative learning, hands-on-science, and discovery learning. Pre- and post-tests are included

Towards full automation of accelerators through computer control

CERN Document Server

Gamble, J; Kemp, D; Keyser, R; Koutchouk, Jean-Pierre; Martucci, P P; Tausch, Lothar A; Vos, L

1980-01-01

The computer control system of the Intersecting Storage Rings (ISR) at CERN has always laid emphasis on two particular operational aspects, the first being the reproducibility of machine conditions and the second that of giving the operators the possibility to work in terms of machine parameters such as the tune. Already certain phases of the operation are optimized by the control system, whilst others are automated with a minimum of manual intervention. The authors describe this present control system with emphasis on the existing automated facilities and the features of the control system which make it possible. It then discusses the steps needed to completely automate the operational procedure of accelerators. (7 refs).

Towards full automation of accelerators through computer control

International Nuclear Information System (INIS)

Gamble, J.; Hemery, J.-Y.; Kemp, D.; Keyser, R.; Koutchouk, J.-P.; Martucci, P.; Tausch, L.; Vos, L.

1980-01-01

The computer control system of the Intersecting Storage Rings (ISR) at CERN has always laid emphasis on two particular operational aspects, the first being the reproducibility of machine conditions and the second that of giving the operators the possibility to work in terms of machine parameters such as the tune. Already certain phases of the operation are optimized by the control system, whilst others are automated with a minimum of manual intervention. The paper describes this present control system with emphasis on the existing automated facilities and the features of the control system which make it possible. It then discusses the steps needed to completely automate the operational procedure of accelerators. (Auth.)

Video Golf

Science.gov (United States)

1995-01-01

George Nauck of ENCORE!!! invented and markets the Advanced Range Performance (ARPM) Video Golf System for measuring the result of a golf swing. After Nauck requested their assistance, Marshall Space Flight Center scientists suggested video and image processing/computing technology, and provided leads on commercial companies that dealt with the pertinent technologies. Nauck contracted with Applied Research Inc. to develop a prototype. The system employs an elevated camera, which sits behind the tee and follows the flight of the ball down range, catching the point of impact and subsequent roll. Instant replay of the video on a PC monitor at the tee allows measurement of the carry and roll. The unit measures distance and deviation from the target line, as well as distance from the target when one is selected. The information serves as an immediate basis for making adjustments or as a record of skill level progress for golfers.

Honeywell Modular Automation System Computer Software Documentation

International Nuclear Information System (INIS)

CUNNINGHAM, L.T.

1999-01-01

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2

Temporal Segmentation of MPEG Video Streams

Directory of Open Access Journals (Sweden)

Janko Calic

2002-06-01

Full Text Available Many algorithms for temporal video partitioning rely on the analysis of uncompressed video features. Since the information relevant to the partitioning process can be extracted directly from the MPEG compressed stream, higher efficiency can be achieved utilizing information from the MPEG compressed domain. This paper introduces a real-time algorithm for scene change detection that analyses the statistics of the macroblock features extracted directly from the MPEG stream. A method for extraction of the continuous frame difference that transforms the 3D video stream into a 1D curve is presented. This transform is then further employed to extract temporal units within the analysed video sequence. Results of computer simulations are reported.

A Computational Architecture for Programmable Automation Research

Science.gov (United States)

Taylor, Russell H.; Korein, James U.; Maier, Georg E.; Durfee, Lawrence F.

1987-03-01

This short paper describes recent work at the IBM T. J. Watson Research Center directed at developing a highly flexible computational architecture for research on sensor-based programmable automation. The system described here has been designed with a focus on dynamic configurability, layered user inter-faces and incorporation of sensor-based real time operations into new commands. It is these features which distinguish it from earlier work. The system is cur-rently being implemented at IBM for research purposes and internal use and is an outgrowth of programmable automation research which has been ongoing since 1972 [e.g., 1, 2, 3, 4, 5, 6] .

Computer and video game addiction-a comparison between game users and non-game users.

Science.gov (United States)

Weinstein, Aviv Malkiel

2010-09-01

Computer game addiction is excessive or compulsive use of computer and video games that may interfere with daily life. It is not clear whether video game playing meets diagnostic criteria for Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition (DSM-IV). First objective is to review the literature on computer and video game addiction over the topics of diagnosis, phenomenology, epidemiology, and treatment. Second objective is to describe a brain imaging study measuring dopamine release during computer game playing. Article search of 15 published articles between 2000 and 2009 in Medline and PubMed on computer and video game addiction. Nine abstinent "ecstasy" users and 8 control subjects were scanned at baseline and after performing on a motorbike riding computer game while imaging dopamine release in vivo with [123I] IBZM and single photon emission computed tomography (SPECT). Psycho-physiological mechanisms underlying computer game addiction are mainly stress coping mechanisms, emotional reactions, sensitization, and reward. Computer game playing may lead to long-term changes in the reward circuitry that resemble the effects of substance dependence. The brain imaging study showed that healthy control subjects had reduced dopamine D2 receptor occupancy of 10.5% in the caudate after playing a motorbike riding computer game compared with baseline levels of binding consistent with increased release and binding to its receptors. Ex-chronic "ecstasy" users showed no change in levels of dopamine D2 receptor occupancy after playing this game. This evidence supports the notion that psycho-stimulant users have decreased sensitivity to natural reward. Computer game addicts or gamblers may show reduced dopamine response to stimuli associated with their addiction presumably due to sensitization.

Automatic video segmentation employing object/camera modeling techniques

NARCIS (Netherlands)

Farin, D.S.

2005-01-01

Practically established video compression and storage techniques still process video sequences as rectangular images without further semantic structure. However, humans watching a video sequence immediately recognize acting objects as semantic units. This semantic object separation is currently not

Effect of Computer-Based Video Games on Children: An Experimental Study

Science.gov (United States)

Chuang, Tsung-Yen; Chen, Wei-Fan

2009-01-01

This experimental study investigated whether computer-based video games facilitate children's cognitive learning. In comparison to traditional computer-assisted instruction (CAI), this study explored the impact of the varied types of instructional delivery strategies on children's learning achievement. One major research null hypothesis was…

Examining human behavior in video games: The development of a computational model to measure aggression.

Science.gov (United States)

Lamb, Richard; Annetta, Leonard; Hoston, Douglas; Shapiro, Marina; Matthews, Benjamin

2018-06-01

Video games with violent content have raised considerable concern in popular media and within academia. Recently, there has been considerable attention regarding the claim of the relationship between aggression and video game play. The authors of this study propose the use of a new class of tools developed via computational models to allow examination of the question of whether there is a relationship between violent video games and aggression. The purpose of this study is to computationally model and compare the General Aggression Model with the Diathesis Mode of Aggression related to the play of violent content in video games. A secondary purpose is to provide a method of measuring and examining individual aggression arising from video game play. Total participants examined for this study are N = 1065. This study occurs in three phases. Phase 1 is the development and quantification of the profile combination of traits via latent class profile analysis. Phase 2 is the training of the artificial neural network. Phase 3 is the comparison of each model as a computational model with and without the presence of video game violence. Results suggest that a combination of environmental factors and genetic predispositions trigger aggression related to video games.

Methods of physical experiment and installation automation on the base of computers

International Nuclear Information System (INIS)

Stupin, Yu.V.

1983-01-01

Peculiarities of using computers for physical experiment and installation automation are considered. Systems for data acquisition and processing on the base of microprocessors, micro- and mini-computers, CAMAC equipment and real time operational systems as well as systems intended for automation of physical experiments on accelerators and installations of laser thermonuclear fusion and installations for plasma investigation are dpscribed. The problems of multimachine complex and multi-user system, arrangement, development of automated systems for collective use, arrangement of intermachine data exchange and control of experimental data base are discussed. Data on software systems used for complex experimental data processing are presented. It is concluded that application of new computers in combination with new possibilities provided for users by universal operational systems essentially exceeds efficiency of a scientist work

A software for computer automated radioactive particle tracking

Energy Technology Data Exchange (ETDEWEB)

Vieira, Wilson S.; Brandao, Luis E. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)]. E-mails: wilson@ien.gov.br; brandao@ien.gov.br; Braz, Delson [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE)]. E-mail: delson@smb.lin.ufrj.br

2008-07-01

TRACO-1 is the first software developed in Brazil for optimization and diagnosis of multiphase chemical reactors employing the technique known as 'Computer Automated Radioactive Particle Tracking' whose main idea is to follow the movement of a punctual radioactive particle inside a vessel. Considering that this particle has a behavior similar of the phase under investigation, important conclusions can be achieved. As a preliminary TRACO-1 evaluation, a simulation was carried out with the aid of a commercial software called MICROSHIELD, version 5.05, to obtain values of photon counting rates at four detector surfaces. These counting were related to the emission of gamma radiation from a radioactive source because they are the main TRACO-1 input variables. Although the results that has been found are incipient, the analysis of them suggest that the tracking of a radioactive source using TRACO- 1 can be well succeed, but a better evaluation of the capabilities of this software will only be achieved after its application in real experiments. (author)

Analysing the doctor_patient_computer relationship: the use of video data

Directory of Open Access Journals (Sweden)

Christopher Pearce

2006-12-01

Full Text Available This paper examines the utility of using digital video data in observational studies involving doctors' and patients' use of computers in the consultation. Previous observational studies have used either direct observations or analogue videotapes. We describe a method currently in use in a study examining how doctors, patients and computers interact in the consultation. The study is set in general practice as this is the most clinically computerised section of the Australian healthcare system. Computers are now used for clinical functions in 90% of doctors' surgeries. With this rapid rise of computerisation, concerns have been expressed as to how the computer will affect the doctor_patient relationship. To assess how doctors, patients and computers interact, we have chosen an observational technique, namely to make digital videotapes of actual consultations. This analysis is based on a theoretical framework derived from dramaturgical analysis. Data are gathered from general practitioners who are high-level users of computers, as defined by their use of progress notes, as well as prescribing and test ordering. The subsequent digital data is then transferred onto computer and analysed according to our conceptual framework, making use of video-tagging software.

The Employment-Impact of Automation in Canada

OpenAIRE

McLean, Colin Alexander

2015-01-01

Standard neoclassical models of labour demand predict that automation does not produce long-term increases in unemployment. Supporting evidence in Canada between 1970 and 2008 is explained by the reallocation of labour from industries with high levels of automation such as Manufacturing to industries with low levels of automation such as Retail and Wholesale Trade, and Business Services. Recent evidence indicates however that on-going technological advances are now driving labour automation i...

Spatiotemporal video deinterlacing using control grid interpolation

Science.gov (United States)

Venkatesan, Ragav; Zwart, Christine M.; Frakes, David H.; Li, Baoxin

2015-03-01

With the advent of progressive format display and broadcast technologies, video deinterlacing has become an important video-processing technique. Numerous approaches exist in the literature to accomplish deinterlacing. While most earlier methods were simple linear filtering-based approaches, the emergence of faster computing technologies and even dedicated video-processing hardware in display units has allowed higher quality but also more computationally intense deinterlacing algorithms to become practical. Most modern approaches analyze motion and content in video to select different deinterlacing methods for various spatiotemporal regions. We introduce a family of deinterlacers that employs spectral residue to choose between and weight control grid interpolation based spatial and temporal deinterlacing methods. The proposed approaches perform better than the prior state-of-the-art based on peak signal-to-noise ratio, other visual quality metrics, and simple perception-based subjective evaluations conducted by human viewers. We further study the advantages of using soft and hard decision thresholds on the visual performance.

Computer automation of ultrasonic testing. [inspection of ultrasonic welding

Science.gov (United States)

Yee, B. G. W.; Kerlin, E. E.; Gardner, A. H.; Dunmyer, D.; Wells, T. G.; Robinson, A. R.; Kunselman, J. S.; Walker, T. C.

1974-01-01

Report describes a prototype computer-automated ultrasonic system developed for the inspection of weldments. This system can be operated in three modes: manual, automatic, and computer-controlled. In the computer-controlled mode, the system will automatically acquire, process, analyze, store, and display ultrasonic inspection data in real-time. Flaw size (in cross-section), location (depth), and type (porosity-like or crack-like) can be automatically discerned and displayed. The results and pertinent parameters are recorded.

Automated motion imagery exploitation for surveillance and reconnaissance

Science.gov (United States)

Se, Stephen; Laliberte, France; Kotamraju, Vinay; Dutkiewicz, Melanie

2012-06-01

Airborne surveillance and reconnaissance are essential for many military missions. Such capabilities are critical for troop protection, situational awareness, mission planning and others, such as post-operation analysis / damage assessment. Motion imagery gathered from both manned and unmanned platforms provides surveillance and reconnaissance information that can be used for pre- and post-operation analysis, but these sensors can gather large amounts of video data. It is extremely labour-intensive for operators to analyse hours of collected data without the aid of automated tools. At MDA Systems Ltd. (MDA), we have previously developed a suite of automated video exploitation tools that can process airborne video, including mosaicking, change detection and 3D reconstruction, within a GIS framework. The mosaicking tool produces a geo-referenced 2D map from the sequence of video frames. The change detection tool identifies differences between two repeat-pass videos taken of the same terrain. The 3D reconstruction tool creates calibrated geo-referenced photo-realistic 3D models. The key objectives of the on-going project are to improve the robustness, accuracy and speed of these tools, and make them more user-friendly to operational users. Robustness and accuracy are essential to provide actionable intelligence, surveillance and reconnaissance information. Speed is important to reduce operator time on data analysis. We are porting some processor-intensive algorithms to run on a Graphics Processing Unit (GPU) in order to improve throughput. Many aspects of video processing are highly parallel and well-suited for optimization on GPUs, which are now commonly available on computers. Moreover, we are extending the tools to handle video data from various airborne platforms and developing the interface to the Coalition Shared Database (CSD). The CSD server enables the dissemination and storage of data from different sensors among NATO countries. The CSD interface allows

Test-retest reliability of computer-based video analysis of general movements in healthy term-born infants.

Science.gov (United States)

Valle, Susanne Collier; Støen, Ragnhild; Sæther, Rannei; Jensenius, Alexander Refsum; Adde, Lars

2015-10-01

A computer-based video analysis has recently been presented for quantitative assessment of general movements (GMs). This method's test-retest reliability, however, has not yet been evaluated. The aim of the current study was to evaluate the test-retest reliability of computer-based video analysis of GMs, and to explore the association between computer-based video analysis and the temporal organization of fidgety movements (FMs). Test-retest reliability study. 75 healthy, term-born infants were recorded twice the same day during the FMs period using a standardized video set-up. The computer-based movement variables "quantity of motion mean" (Qmean), "quantity of motion standard deviation" (QSD) and "centroid of motion standard deviation" (CSD) were analyzed, reflecting the amount of motion and the variability of the spatial center of motion of the infant, respectively. In addition, the association between the variable CSD and the temporal organization of FMs was explored. Intraclass correlation coefficients (ICC 1.1 and ICC 3.1) were calculated to assess test-retest reliability. The ICC values for the variables CSD, Qmean and QSD were 0.80, 0.80 and 0.86 for ICC (1.1), respectively; and 0.80, 0.86 and 0.90 for ICC (3.1), respectively. There were significantly lower CSD values in the recordings with continual FMs compared to the recordings with intermittent FMs (ptest-retest reliability of computer-based video analysis of GMs, and a significant association between our computer-based video analysis and the temporal organization of FMs. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Robust localisation of automated guided vehicles for computer-integrated manufacturing environments

Directory of Open Access Journals (Sweden)

Dixon, R. C.

2013-05-01

Full Text Available As industry moves toward an era of complete automation and mass customisation, automated guided vehicles (AGVs are used as material handling systems. However, the current techniques that provide navigation, control, and manoeuvrability of automated guided vehicles threaten to create bottlenecks and inefficiencies in manufacturing environments that strive towards the optimisation of part production. This paper proposes a decentralised localisation technique for an automated guided vehicle without any non-holonomic constraints. Incorporation of these vehicles into the material handling system of a computer-integrated manufacturing environment would increase the characteristics of robustness, efficiency, flexibility, and advanced manoeuvrability.

Semi-automated detection of fractional shortening in zebrafish embryo heart videos

Directory of Open Access Journals (Sweden)

Nasrat Sara

2016-09-01

Full Text Available Quantifying cardiac functions in model organisms like embryonic zebrafish is of high importance in small molecule screens for new therapeutic compounds. One relevant cardiac parameter is the fractional shortening (FS. A method for semi-automatic quantification of FS in video recordings of zebrafish embryo hearts is presented. The software provides automated visual information about the end-systolic and end-diastolic stages of the heart by displaying corresponding colored lines into a Motion-mode display. After manually marking the ventricle diameters in frames of end-systolic and end-diastolic stages, the FS is calculated. The software was evaluated by comparing the results of the determination of FS with results obtained from another established method. Correlations of 0.96 < r < 0.99 between the two methods were found indicating that the new software provides comparable results for the determination of the FS.

Video Games: A Human Factors Guide to Visual Display Design and Instructional System Design

Science.gov (United States)

1984-04-01

Abstract K Electronic video games have many of the same technological and psychological characteristics that are found in military computer-based...employed as learning vehicles, the especially compelling characteristics of electronic video games have not been fully explored for possible exploitation...new electronic video games . !? Accordingly, the following experiment was designed to determine those m dimensions along which electronic

Computers, Automation, and the Employment of Persons Who Are Blind or Visually Impaired.

Science.gov (United States)

Mather, J.

1994-01-01

This article discusses the impact of technology on the formation of skills and the career advancement of persons who are blind or visually impaired. It concludes that dependence on technology (computerization and automation) and the mechanistic aspects of jobs may trap blind and visually impaired workers in occupations with narrow career paths…

Automated System for Teaching Computational Complexity of Algorithms Course

Directory of Open Access Journals (Sweden)

Vadim S. Roublev

2017-01-01

Full Text Available This article describes problems of designing automated teaching system for “Computational complexity of algorithms” course. This system should provide students with means to familiarize themselves with complex mathematical apparatus and improve their mathematical thinking in the respective area. The article introduces the technique of algorithms symbol scroll table that allows estimating lower and upper bounds of computational complexity. Further, we introduce a set of theorems that facilitate the analysis in cases when the integer rounding of algorithm parameters is involved and when analyzing the complexity of a sum. At the end, the article introduces a normal system of symbol transformations that allows one both to perform any symbol transformations and simplifies the automated validation of such transformations. The article is published in the authors’ wording.

Building Professionalism and Employability Skills: Embedding Employer Engagement within First-Year Computing Modules

Science.gov (United States)

Hanna, Philip; Allen, Angela; Kane, Russell; Anderson, Neil; McGowan, Aidan; Collins, Matthew; Hutchison, Malcolm

2015-01-01

This paper outlines a means of improving the employability skills of first-year university students through a closely integrated model of employer engagement within computer science modules. The outlined approach illustrates how employability skills, including communication, teamwork and time management skills, can be contextualised in a manner…

A kind of video image digitizing circuit based on computer parallel port

International Nuclear Information System (INIS)

Wang Yi; Tang Le; Cheng Jianping; Li Yuanjing; Zhang Binquan

2003-01-01

A kind of video images digitizing circuit based on parallel port was developed to digitize the flash x ray images in our Multi-Channel Digital Flash X ray Imaging System. The circuit can digitize the video images and store in static memory. The digital images can be transferred to computer through parallel port and can be displayed, processed and stored. (authors)

Combining Archetypes, Ontologies and Formalization Enables Automated Computation of Quality Indicators.

Science.gov (United States)

Legaz-García, María Del Carmen; Dentler, Kathrin; Fernández-Breis, Jesualdo Tomás; Cornet, Ronald

2017-01-01

ArchMS is a framework that represents clinical information and knowledge using ontologies in OWL, which facilitates semantic interoperability and thereby the exploitation and secondary use of clinical data. However, it does not yet support the automated assessment of quality of care. CLIF is a stepwise method to formalize quality indicators. The method has been implemented in the CLIF tool which supports its users in generating computable queries based on a patient data model which can be based on archetypes. To enable the automated computation of quality indicators using ontologies and archetypes, we tested whether ArchMS and the CLIF tool can be integrated. We successfully automated the process of generating SPARQL queries from quality indicators that have been formalized with CLIF and integrated them into ArchMS. Hence, ontologies and archetypes can be combined for the execution of formalized quality indicators.

Development of P4140 video data wall projector; Video data wall projector

Energy Technology Data Exchange (ETDEWEB)

Watanabe, H.; Inoue, H. [Toshiba Corp., Tokyo (Japan)

1998-12-01

The P4140 is a 3 cathode-ray tube (CRT) video data wall projector for super video graphics array (SVGA) signals. It is used as an image display unit, providing a large screen when several sets are put together. A high-quality picture has been realized by higher resolution and improved color uniformity technology. A new convergence adjustment system has also been developed through the optimal combination of digital and analog technologies. This video data wall installation has been greatly enhanced by the automation of cubes and cube performance settings. The P4140 video data wall projector can be used for displaying not only data but video as well. (author)

The kids got game: Computer/video games, gender and learning outcomes in science classrooms

Science.gov (United States)

Anderson, Janice Lyn

In recent years educators have begun to explore how to purposively design computer/video games to support student learning. This interest in video games has arisen in part because educational video games appear to have the potential to improve student motivation and interest in technology, and engage students in learning through the use of a familiar medium (Squire, 2005; Shaffer, 2006; Gee, 2005). The purpose of this dissertation research is to specifically address the issue of student learning through the use of educational computer/video games. Using the Quest Atlantis computer game, this study involved a mixed model research strategy that allowed for both broad understandings of classroom practices and specific analysis of outcomes through the themes that emerged from the case studies of the gendered groups using the game. Specifically, this study examined how fifth-grade students learning about science concepts, such as water quality and ecosystems, unfolds over time as they participate in the Quest Atlantis computer game. Data sources included classroom observations and video, pre- and post-written assessments, pre- and post- student content interviews, student field notebooks, field reports and the field notes of the researcher. To make sense of how students learning unfolded, video was analyzed using a framework of interaction analysis and small group interactions (Jordan & Henderson, 1995; Webb, 1995). These coded units were then examined with respect to student artifacts and assessments and patterns of learning trajectories analyzed. The analysis revealed that overall, student learning outcomes improved from pre- to post-assessments for all students. While there were no observable gendered differences with respect to the test scores and content interviews, there were gendered differences with respect to game play. Implications for game design, use of external scaffolds, games as tools for learning and gendered findings are discussed.

Computer-based video analysis identifies infants with absence of fidgety movements.

Science.gov (United States)

Støen, Ragnhild; Songstad, Nils Thomas; Silberg, Inger Elisabeth; Fjørtoft, Toril; Jensenius, Alexander Refsum; Adde, Lars

2017-10-01

BackgroundAbsence of fidgety movements (FMs) at 3 months' corrected age is a strong predictor of cerebral palsy (CP) in high-risk infants. This study evaluates the association between computer-based video analysis and the temporal organization of FMs assessed with the General Movement Assessment (GMA).MethodsInfants were eligible for this prospective cohort study if referred to a high-risk follow-up program in a participating hospital. Video recordings taken at 10-15 weeks post term age were used for GMA and computer-based analysis. The variation of the spatial center of motion, derived from differences between subsequent video frames, was used for quantitative analysis.ResultsOf 241 recordings from 150 infants, 48 (24.1%) were classified with absence of FMs or sporadic FMs using the GMA. The variation of the spatial center of motion (C SD ) during a recording was significantly lower in infants with normal (0.320; 95% confidence interval (CI) 0.309, 0.330) vs. absence of or sporadic (0.380; 95% CI 0.361, 0.398) FMs (P<0.001). A triage model with C SD thresholds chosen for sensitivity of 90% and specificity of 80% gave a 40% referral rate for GMA.ConclusionQuantitative video analysis during the FMs' period can be used to triage infants at high risk of CP to early intervention or observational GMA.

Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous MultiCore Systems

Science.gov (United States)

2017-04-13

AFRL-AFOSR-UK-TR-2017-0029 Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous MultiCore Systems ...2012, “ Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous MultiCore Systems .” 2. The objective...2012 - 01/25/2015 4. TITLE AND SUBTITLE Automated and Assistive Tools for Accelerated Code migration of Scientific Computing on to Heterogeneous

Automation in control laboratory and related information management system

International Nuclear Information System (INIS)

Gopalan, B.; Syamsundar, S.

1997-01-01

In the field of technology, the word automation is often employed to indicate many types of mechanized operations, though in the strict sense it means those operations which involve application of an element of knowledge or decision making without the intervention of human mind. In laboratory practice for example, the use of multi-sample array turret and millivolt recorder connected to a spectrophotometer represents a situation of mechanized operation as these gadgets help eliminating human muscle power. If a micro processor or a computer is connected to the above equipment for interpreting the measured parameters and establishing calibration graphs or display concentration results, then a real automated situation results where the application of human mind is eliminated. The state of the art of modern laboratory analysis abounds in the employment of automatic analytical equipment thanks to the development in the field of VLSI, computer, software etc. and this has given rise to the concept of laboratory automation

Using Videos and 3D Animations for Conceptual Learning in Basic Computer Units

Science.gov (United States)

Cakiroglu, Unal; Yilmaz, Huseyin

2017-01-01

This article draws on a one-semester study to investigate the effect of videos and 3D animations on students' conceptual understandings about basic computer units. A quasi-experimental design was carried out in two classrooms; videos and 3D animations were used in classroom activities in one group and those were used for homework in the other…

Glyph-Based Video Visualization for Semen Analysis

KAUST Repository

Duffy, Brian

2015-08-01

© 2013 IEEE. The existing efforts in computer assisted semen analysis have been focused on high speed imaging and automated image analysis of sperm motility. This results in a large amount of data, and it is extremely challenging for both clinical scientists and researchers to interpret, compare and correlate the multidimensional and time-varying measurements captured from video data. In this work, we use glyphs to encode a collection of numerical measurements taken at a regular interval and to summarize spatio-temporal motion characteristics using static visual representations. The design of the glyphs addresses the needs for (a) encoding some 20 variables using separable visual channels, (b) supporting scientific observation of the interrelationships between different measurements and comparison between different sperm cells and their flagella, and (c) facilitating the learning of the encoding scheme by making use of appropriate visual abstractions and metaphors. As a case study, we focus this work on video visualization for computer-aided semen analysis, which has a broad impact on both biological sciences and medical healthcare. We demonstrate that glyph-based visualization can serve as a means of external memorization of video data as well as an overview of a large set of spatiotemporal measurements. It enables domain scientists to make scientific observation in a cost-effective manner by reducing the burden of viewing videos repeatedly, while providing them with a new visual representation for conveying semen statistics.

The Effect of Computer Automation on Institutional Review Board (IRB) Office Efficiency

Science.gov (United States)

Oder, Karl; Pittman, Stephanie

2015-01-01

Companies purchase computer systems to make their processes more efficient through automation. Some academic medical centers (AMC) have purchased computer systems for their institutional review boards (IRB) to increase efficiency and compliance with regulations. IRB computer systems are expensive to purchase, deploy, and maintain. An AMC should…

Testing music selection automation possibilities for video ads

Directory of Open Access Journals (Sweden)

Wiesener Oliver

2017-09-01

Full Text Available The importance of video ads on social media platforms can be measured by the number of views. For instance, Samsung’s commercial ad for one of its new smartphones reached more than 46 million viewers at Youtube. Video ads address users both visually and aurally. Often, the visual sense is engaged by users focusing on other screens, rather than on the screen with the video ad, which is referred to as the second screen syndrome. Therefore, the importance of the audio channel seems to gain more importance. To get back the visual attention of users that are deflected from other visual impulses it appears reasonable to adapt the music to the target group. Additionally, it appears useful to adapt the music to the content of the video. Thus, the overall success of a video ad could be improved by increasing the attention of the users. Humans typically decide which music is to be used in a video ad. If there is a correlation between music, products and target groups, a digitization of the music selection process appears to be possible. Since the digitization progress in the music sector is currently mainly focused on music composing this article strives for taking a first step towards the digitization of the music selection.

Impulsive noise removal from color video with morphological filtering

Science.gov (United States)

Ruchay, Alexey; Kober, Vitaly

2017-09-01

This paper deals with impulse noise removal from color video. The proposed noise removal algorithm employs a switching filtering for denoising of color video; that is, detection of corrupted pixels by means of a novel morphological filtering followed by removal of the detected pixels on the base of estimation of uncorrupted pixels in the previous scenes. With the help of computer simulation we show that the proposed algorithm is able to well remove impulse noise in color video. The performance of the proposed algorithm is compared in terms of image restoration metrics with that of common successful algorithms.

Regimes of data output from an automated scanning system into a computer

International Nuclear Information System (INIS)

Ovsov, Yu.V.; Shaislamov, P.T.

1984-01-01

A method is described for accomplishment of rather a complex algorithm of various coordinate and service data transmission from different automated scanning system devices into a monitoring computer in the automated system for processing images from bubble chambers. The accepted data output algorithm and the developed appropriate equipment enable data transmission both in separate words and word arrays

Playing Violent Video and Computer Games and Adolescent Self-Concept.

Science.gov (United States)

Funk, Jeanne B.; Buchman, Debra D.

1996-01-01

Documents current adolescent electronic game-playing habits, exploring associations among preference for violent games, frequency and location of play, and self-concept. Identifies marked gender differences in game-playing habits and in scores on a self-perception profile. Finds that for girls, more time playing video or computer games is…

Computational multispectral video imaging [Invited].

Science.gov (United States)

Wang, Peng; Menon, Rajesh

2018-01-01

Multispectral imagers reveal information unperceivable to humans and conventional cameras. Here, we demonstrate a compact single-shot multispectral video-imaging camera by placing a micro-structured diffractive filter in close proximity to the image sensor. The diffractive filter converts spectral information to a spatial code on the sensor pixels. Following a calibration step, this code can be inverted via regularization-based linear algebra to compute the multispectral image. We experimentally demonstrated spectral resolution of 9.6 nm within the visible band (430-718 nm). We further show that the spatial resolution is enhanced by over 30% compared with the case without the diffractive filter. We also demonstrate Vis-IR imaging with the same sensor. Because no absorptive color filters are utilized, sensitivity is preserved as well. Finally, the diffractive filters can be easily manufactured using optical lithography and replication techniques.

Automated touch sensing in the mouse tapered beam test using Raspberry Pi.

Science.gov (United States)

Ardesch, Dirk Jan; Balbi, Matilde; Murphy, Timothy H

2017-11-01

Rodent models of neurological disease such as stroke are often characterized by motor deficits. One of the tests that are used to assess these motor deficits is the tapered beam test, which provides a sensitive measure of bilateral motor function based on foot faults (slips) made by a rodent traversing a gradually narrowing beam. However, manual frame-by-frame scoring of video recordings is necessary to obtain test results, which is time-consuming and prone to human rater bias. We present a cost-effective method for automated touch sensing in the tapered beam test. Capacitive touch sensors detect foot faults onto the beam through a layer of conductive paint, and results are processed and stored on a Raspberry Pi computer. Automated touch sensing using this method achieved high sensitivity (96.2%) as compared to 'gold standard' manual video scoring. Furthermore, it provided a reliable measure of lateralized motor deficits in mice with unilateral photothrombotic stroke: results indicated an increased number of contralesional foot faults for up to 6days after ischemia. The automated adaptation of the tapered beam test produces results immediately after each trial, without the need for labor-intensive post-hoc video scoring. It also increases objectivity of the data as it requires less experimenter involvement during analysis. Automated touch sensing may provide a useful adaptation to the existing tapered beam test in mice, while the simplicity of the hardware lends itself to potential further adaptations to related behavioral tests. Copyright © 2017 Elsevier B.V. All rights reserved.

Feasibility of video codec algorithms for software-only playback

Science.gov (United States)

Rodriguez, Arturo A.; Morse, Ken

1994-05-01

Software-only video codecs can provide good playback performance in desktop computers with a 486 or 68040 CPU running at 33 MHz without special hardware assistance. Typically, playback of compressed video can be categorized into three tasks: the actual decoding of the video stream, color conversion, and the transfer of decoded video data from system RAM to video RAM. By current standards, good playback performance is the decoding and display of video streams of 320 by 240 (or larger) compressed frames at 15 (or greater) frames-per- second. Software-only video codecs have evolved by modifying and tailoring existing compression methodologies to suit video playback in desktop computers. In this paper we examine the characteristics used to evaluate software-only video codec algorithms, namely: image fidelity (i.e., image quality), bandwidth (i.e., compression) ease-of-decoding (i.e., playback performance), memory consumption, compression to decompression asymmetry, scalability, and delay. We discuss the tradeoffs among these variables and the compromises that can be made to achieve low numerical complexity for software-only playback. Frame- differencing approaches are described since software-only video codecs typically employ them to enhance playback performance. To complement other papers that appear in this session of the Proceedings, we review methods derived from binary pattern image coding since these methods are amenable for software-only playback. In particular, we introduce a novel approach called pixel distribution image coding.

Lipid vesicle shape analysis from populations using light video microscopy and computer vision.

Directory of Open Access Journals (Sweden)

Jernej Zupanc

Full Text Available We present a method for giant lipid vesicle shape analysis that combines manually guided large-scale video microscopy and computer vision algorithms to enable analyzing vesicle populations. The method retains the benefits of light microscopy and enables non-destructive analysis of vesicles from suspensions containing up to several thousands of lipid vesicles (1-50 µm in diameter. For each sample, image analysis was employed to extract data on vesicle quantity and size distributions of their projected diameters and isoperimetric quotients (measure of contour roundness. This process enables a comparison of samples from the same population over time, or the comparison of a treated population to a control. Although vesicles in suspensions are heterogeneous in sizes and shapes and have distinctively non-homogeneous distribution throughout the suspension, this method allows for the capture and analysis of repeatable vesicle samples that are representative of the population inspected.

In-camera video-stream processing for bandwidth reduction in web inspection

Science.gov (United States)

Jullien, Graham A.; Li, QiuPing; Hajimowlana, S. Hossain; Morvay, J.; Conflitti, D.; Roberts, James W.; Doody, Brian C.

1996-02-01

Automated machine vision systems are now widely used for industrial inspection tasks where video-stream data information is taken in by the camera and then sent out to the inspection system for future processing. In this paper we describe a prototype system for on-line programming of arbitrary real-time video data stream bandwidth reduction algorithms; the output of the camera only contains information that has to be further processed by a host computer. The processing system is built into a DALSA CCD camera and uses a microcontroller interface to download bit-stream data to a XILINXTM FPGA. The FPGA is directly connected to the video data-stream and outputs data to a low bandwidth output bus. The camera communicates to a host computer via an RS-232 link to the microcontroller. Static memory is used to both generate a FIFO interface for buffering defect burst data, and for off-line examination of defect detection data. In addition to providing arbitrary FPGA architectures, the internal program of the microcontroller can also be changed via the host computer and a ROM monitor. This paper describes a prototype system board, mounted inside a DALSA camera, and discusses some of the algorithms currently being implemented for web inspection applications.

Automated cutting in the food industry using computer vision

KAUST Repository

Daley, Wayne D R

2012-01-01

The processing of natural products has posed a significant problem to researchers and developers involved in the development of automation. The challenges have come from areas such as sensing, grasping and manipulation, as well as product-specific areas such as cutting and handling of meat products. Meat products are naturally variable and fixed automation is at its limit as far as its ability to accommodate these products. Intelligent automation systems (such as robots) are also challenged, mostly because of a lack of knowledge of the physical characteristic of the individual products. Machine vision has helped to address some of these shortcomings but underperforms in many situations. Developments in sensors, software and processing power are now offering capabilities that will help to make more of these problems tractable. In this chapter we will describe some of the developments that are underway in terms of computer vision for meat product applications, the problems they are addressing and potential future trends. © 2012 Woodhead Publishing Limited All rights reserved.

The relationship between playing computer or video games with mental health and social relationships among students in guidance schools, Kermanshah.

Science.gov (United States)

Reshadat, S; Ghasemi, S R; Ahmadian, M; RajabiGilan, N

2014-01-09

Computer or video games are a popular recreational activity and playing them may constitute a large part of leisure time. This cross-sectional study aimed to evaluate the relationship between playing computer or video games with mental health and social relationships among students in guidance schools in Kermanshah, Islamic Republic of Iran, in 2012. Our total sample was 573 students and our tool was the General Health Questionnaire (GHQ-28) and social relationships questionnaires. Survey respondents reported spending an average of 71.07 (SD 72.1) min/day on computer or video games. There was a significant relationship between time spent playing games and general mental health (P computer or video games with social relationships and their subscales, including trans-local relationships (P games (P < 0.02) and its dimensions, except for family relationships.

Building professionalism and employability skills: embedding employer engagement within first-year computing modules

Science.gov (United States)

Hanna, Philip; Allen, Angela; Kane, Russell; Anderson, Neil; McGowan, Aidan; Collins, Matthew; Hutchison, Malcolm

2015-07-01

This paper outlines a means of improving the employability skills of first-year university students through a closely integrated model of employer engagement within computer science modules. The outlined approach illustrates how employability skills, including communication, teamwork and time management skills, can be contextualised in a manner that directly relates to student learning but can still be linked forward into employment. The paper tests the premise that developing employability skills early within the curriculum will result in improved student engagement and learning within later modules. The paper concludes that embedding employer participation within first-year models can help relate a distant notion of employability into something of more immediate relevance in terms of how students can best approach learning. Further, by enhancing employability skills early within the curriculum, it becomes possible to improve academic attainment within later modules.

Advanced digital computers, controls, and automation technologies for power plants: Proceedings

International Nuclear Information System (INIS)

Bhatt, S.C.

1992-08-01

This document is a compilation of the papers that were presented at an EPRI workshop on Advances in Computers, Controls, and Automation Technologies for Power Plants. The workshop, sponsored by EPRI's Nuclear Power Division, took place February 1992. It was attended by 157 representatives from electric utilities, equipment manufacturers, engineering consulting organizations, universities, national laboratories, government agencies and international utilities. More than 40% of the attendees were from utilities representing the majority group. There were 30% attendees from equipment manufacturers and the engineering consulting organizations. The participants from government agencies, universities, and national laboratories were about 10% each. The workshop included a keynote address, 35 technical papers, and vendor's equipment demonstrations. The technical papers described the state-of-the-art in the areas of recent utility digital upgrades such as digital feedwater controllers, steam generator level controllers, integrated plant computer systems, computer aided diagnostics, automated testing and surveillance and other applications. A group of technical papers presented the ongoing B ampersand W PWR integrated plant control system prototype developments with the triple redundant advanced digital control system. Several international papers from France, Japan and U.K. presented their programs on advance power plant design and applications. Significant advances in the control and automation technologies such as adaptive controls, self-tuning methods, neural networks and expert systems were presented by developers, universities, and national laboratories. Individual papers are indexed separately

Chinese-English Automation and Computer Technology Dictionary, Volume 2.

Science.gov (United States)

1980-08-01

Chinese-English Automation and Computer Technology Dictionary VOL 2 ItT: SEP 2LECTE \\This dcuflent h as een c i tsrO tog public te1a sae’ I d~suil to...zhuangbei A information link 04 tongxin ].ianjie zhuangzhi A Iconrwnicatioi link 05 tongxin shebei camuenications euipme~nt; 06 omnications facility

Automated Music Video Generation Using Multi-level Feature-based Segmentation

Science.gov (United States)

Yoon, Jong-Chul; Lee, In-Kwon; Byun, Siwoo

The expansion of the home video market has created a requirement for video editing tools to allow ordinary people to assemble videos from short clips. However, professional skills are still necessary to create a music video, which requires a stream to be synchronized with pre-composed music. Because the music and the video are pre-generated in separate environments, even a professional producer usually requires a number of trials to obtain a satisfactory synchronization, which is something that most amateurs are unable to achieve.

Automation, Labor Productivity and Employment

DEFF Research Database (Denmark)

Kromann, Lene; Rose Skaksen, Jan; Sørensen, Anders

CEBR fremlægger nu den første rapport i AIM-projektet. Rapporten viser, at der er gode muligheder for yderligere automation i en stor del af de danske fremstillingsvirksomheder. For i dag er gennemsnitligt kun omkring 30 % af virksomhedernes produktionsprocesser automatiserede. Navnlig procesområ...

PLAYER POSITION DETECTION AND MOVEMENT PATTERN RECOGNITION FOR AUTOMATED TACTICAL ANALYSIS IN BADMINTON

OpenAIRE

KOKUM GAYANATH WEERATUNGA

2018-01-01

This thesis documents the development of a comprehensive approach to automate badminton tactical analysis. First, a computer algorithm was developed to automatically track badminton players moving on a court. Next, a machine learning algorithm was developed to analyse these movements and understand their underlying tactical implications. Both algorithms were tested and validated using video footage recorded at International badminton tournaments. The results demonstrate that the combination o...

CAT: a computer code for the automated construction of fault trees

International Nuclear Information System (INIS)

Apostolakis, G.E.; Salem, S.L.; Wu, J.S.

1978-03-01

A computer code, CAT (Computer Automated Tree, is presented which applies decision table methods to model the behavior of components for systematic construction of fault trees. The decision tables for some commonly encountered mechanical and electrical components are developed; two nuclear subsystems, a Containment Spray Recirculation System and a Consequence Limiting Control System, are analyzed to demonstrate the applications of CAT code

Automated, Resummed and Effective: Precision Computations for the LHC and Beyond

CERN Document Server

2017-01-01

Precise predictions for collider processes are crucial to interpret the results from the Large Hadron Collider (LHC) at CERN. The goal of this programme is to bring together experts from different communities in precision collider physics (diagrammatic resummation vs. effective field theory, automated numerical computations vs. analytic approaches, etc.) to discuss the latest advances in jet physics, higher-order computations and resummation.

Selectively De-animating and Stabilizing Videos

Science.gov (United States)

2014-12-11

motions intact. Video textures [97, 65, 7, 77] are a well-known approach for seamlessly looping stochastic motions. Like cinema - graphs, a video...domain of input videos to portraits. We all use portrait photographs to express our identities online. Portraits are often the first visuals seen by...quality of our result, we show some comparisons of our automated cinema - graphs against our user driven method described in Chapter 3 in Figure 4.7

Automated computation of one-loop integrals in massless theories

International Nuclear Information System (INIS)

Hameren, A. van; Vollinga, J.; Weinzierl, S.

2005-01-01

We consider one-loop tensor and scalar integrals, which occur in a massless quantum field theory, and we report on the implementation into a numerical program of an algorithm for the automated computation of these one-loop integrals. The number of external legs of the loop integrals is not restricted. All calculations are done within dimensional regularization. (orig.)

Automated detection of submerged navigational obstructions in freshwater impoundments with hull mounted sidescan sonar

Science.gov (United States)

Morris, Phillip A.

The prevalence of low-cost side scanning sonar systems mounted on small recreational vessels has created improved opportunities to identify and map submerged navigational hazards in freshwater impoundments. However, these economical sensors also present unique challenges for automated techniques. This research explores related literature in automated sonar imagery processing and mapping technology, proposes and implements a framework derived from these sources, and evaluates the approach with video collected from a recreational grade sonar system. Image analysis techniques including optical character recognition and an unsupervised computer automated detection (CAD) algorithm are employed to extract the transducer GPS coordinates and slant range distance of objects protruding from the lake bottom. The retrieved information is formatted for inclusion into a spatial mapping model. Specific attributes of the sonar sensors are modeled such that probability profiles may be projected onto a three dimensional gridded map. These profiles are computed from multiple points of view as sonar traces crisscross or come near each other. As lake levels fluctuate over time so do the elevation points of view. With each sonar record, the probability of a hazard existing at certain elevations at the respective grid points is updated with Bayesian mechanics. As reinforcing data is collected, the confidence of the map improves. Given a lake's current elevation and a vessel draft, a final generated map can identify areas of the lake that have a high probability of containing hazards that threaten navigation. The approach is implemented in C/C++ utilizing OpenCV, Tesseract OCR, and QGIS open source software and evaluated in a designated test area at Lake Lavon, Collin County, Texas.

On the development of new SPMN diurnal video systems for daylight fireball monitoring

Science.gov (United States)

Madiedo, J. M.; Trigo-Rodríguez, J. M.; Castro-Tirado, A. J.

2008-09-01

Convenciones Ecológicas y Medioambientales (CIECEM, University of Huelva), in the environment of Doñana Natural Park (Huelva province). In this way, both stations, which are separated by a distance of 75 km, will work as a double video station system in order to provide trajectory and orbit information of mayor bolides and, thus, increase the chance of meteorite recovery in the Iberian Peninsula. The new diurnal SPMN video stations are endowed with different models of Mintron cameras (Mintron Enterprise Co., LTD). These are high-sensitivity devices that employ a colour 1/2" Sony interline transfer CCD image sensor. Aspherical lenses are attached to the video cameras in order to maximize image quality. However, the use of fast lenses is not a priority here: while most of our nocturnal cameras use f0.8 or f1.0 lenses in order to detect meteors as faint as magnitude +3, diurnal systems employ in most cases f1.4 to f2.0 lenses. Their focal length ranges from 3.8 to 12 mm to cover different atmospheric volumes. The cameras are arranged in such a way that the whole sky is monitored from every observing station. Figure 1. A daylight event recorded from Sevilla on May 26, 2008 at 4h30m05.4 +-0.1s UT. The way our diurnal video cameras work is similar to the operation of our nocturnal systems [1]. Thus, diurnal stations are automatically switched on and off at sunrise and sunset, respectively. The images taken at 25 fps and with a resolution of 720x576 pixels are continuously sent to PC computers through a video capture device. The computers run a software (UFOCapture, by SonotaCo, Japan) that automatically registers meteor trails and stores the corresponding video frames on hard disk. Besides, before the signal from the cameras reaches the computers, a video time inserter that employs a GPS device (KIWI-OSD, by PFD Systems) inserts time information on every video frame. This allows us to measure time in a precise way (about 0.01 sec.) along the whole fireball path. EPSC Abstracts

Long-term video surveillance and automated analyses reveal arousal patterns in groups of hibernating bats

Science.gov (United States)

Hayman, David T.S.; Cryan, Paul; Fricker, Paul D.; Dannemiller, Nicholas G.

2017-01-01

Understanding natural behaviours is essential to determining how animals deal with new threats (e.g. emerging diseases). However, natural behaviours of animals with cryptic lifestyles, like hibernating bats, are often poorly characterized. White-nose syndrome (WNS) is an unprecedented disease threatening multiple species of hibernating bats, and pathogen-induced changes to host behaviour may contribute to mortality. To better understand the behaviours of hibernating bats and how they might relate to WNS, we developed new ways of studying hibernation across entire seasons.We used thermal-imaging video surveillance cameras to observe little brown bats (Myotis lucifugus) and Indiana bats (M. sodalis) in two caves over multiple winters. We developed new, sharable software to test for autocorrelation and periodicity of arousal signals in recorded video.We processed 740 days (17,760 hr) of video at a rate of >1,000 hr of video imagery in less than 1 hr using a desktop computer with sufficient resolution to detect increases in arousals during midwinter in both species and clear signals of daily arousal periodicity in infected M. sodalis.Our unexpected finding of periodic synchronous group arousals in hibernating bats demonstrate the potential for video methods and suggest some bats may have innate behavioural strategies for coping with WNS. Surveillance video and accessible analysis software make it now practical to investigate long-term behaviours of hibernating bats and other hard-to-study animals.

Differences by Sex in Association of Mental Health With Video Gaming or Other Nonacademic Computer Use Among US Adolescents.

Science.gov (United States)

Lee, Hogan H; Sung, Jung Hye; Lee, Ji-Young; Lee, Jae Eun

2017-11-22

Although numerous studies have examined the association between playing video games and cognitive skills, aggression, and depression, few studies have examined how these associations differ by sex. The objective of our study was to determine differences by sex in association between video gaming or other nonacademic computer use and depressive symptoms, suicidal behavior, and being bullied among adolescents in the United States. We used data from the 2015 Youth Risk Behavior Survey on 15,624 US high school students. Rao-Scott χ 2 tests, which were adjusted for the complex sampling design, were conducted to assess differences by sex in the association of mental health with video gaming or other nonacademic computer use. Approximately one-fifth (19.4%) of adolescents spent 5 or more hours daily on video gaming or other nonacademic computer use, and 17.9% did not spend any time in those activities. A greater percentage of female adolescents than male adolescents reported spending no time (22.1% and 14.0%, respectively) or 5 hours or more (21.3% and 17.5%, respectively) in gaming and other nonacademic computer use (P gaming or other nonacademic computer use differed by sex. Among female adolescents, prevalence of mental problems increased steadily in association with increased time spent, whereas the pattern for male adolescents followed a J-shaped curve, decreasing initially, increasing slowly, and then increasing rapidly beginning at 4 hours or more. Female adolescents were more likely to have all 3 mental health problems than male adolescents were. Spending no time or 5 hours or more daily on video gaming or other nonacademic computer use was associated with increased mental problems among both sexes. As suggested by the J-shaped relationship, 1 hour or less spent on video gaming or other nonacademic computer use may reduce depressive symptoms, suicidal behavior, and being bullied compared with no use or excessive use.

Toward automating Hammersmith pulled-to-sit examination of infants using feature point based video object tracking.

Science.gov (United States)

Dogra, Debi P; Majumdar, Arun K; Sural, Shamik; Mukherjee, Jayanta; Mukherjee, Suchandra; Singh, Arun

2012-01-01

Hammersmith Infant Neurological Examination (HINE) is a set of tests used for grading neurological development of infants on a scale of 0 to 3. These tests help in assessing neurophysiological development of babies, especially preterm infants who are born before (the fetus reaches) the gestational age of 36 weeks. Such tests are often conducted in the follow-up clinics of hospitals for grading infants with suspected disabilities. Assessment based on HINE depends on the expertise of the physicians involved in conducting the examinations. It has been noted that some of these tests, especially pulled-to-sit and lateral tilting, are difficult to assess solely based on visual observation. For example, during the pulled-to-sit examination, the examiner needs to observe the relative movement of the head with respect to torso while pulling the infant by holding wrists. The examiner may find it difficult to follow the head movement from the coronal view. Video object tracking based automatic or semi-automatic analysis can be helpful in this case. In this paper, we present a video based method to automate the analysis of pulled-to-sit examination. In this context, a dynamic programming and node pruning based efficient video object tracking algorithm has been proposed. Pulled-to-sit event detection is handled by the proposed tracking algorithm that uses a 2-D geometric model of the scene. The algorithm has been tested with normal as well as marker based videos of the examination recorded at the neuro-development clinic of the SSKM Hospital, Kolkata, India. It is found that the proposed algorithm is capable of estimating the pulled-to-sit score with sensitivity (80%-92%) and specificity (89%-96%).

Advantages of computer cameras over video cameras/frame grabbers for high-speed vision applications

Science.gov (United States)

Olson, Gaylord G.; Walker, Jo N.

1997-09-01

Cameras designed to work specifically with computers can have certain advantages in comparison to the use of cameras loosely defined as 'video' cameras. In recent years the camera type distinctions have become somewhat blurred, with a great presence of 'digital cameras' aimed more at the home markets. This latter category is not considered here. The term 'computer camera' herein is intended to mean one which has low level computer (and software) control of the CCD clocking. These can often be used to satisfy some of the more demanding machine vision tasks, and in some cases with a higher rate of measurements than video cameras. Several of these specific applications are described here, including some which use recently designed CCDs which offer good combinations of parameters such as noise, speed, and resolution. Among the considerations for the choice of camera type in any given application would be such effects as 'pixel jitter,' and 'anti-aliasing.' Some of these effects may only be relevant if there is a mismatch between the number of pixels per line in the camera CCD and the number of analog to digital (A/D) sampling points along a video scan line. For the computer camera case these numbers are guaranteed to match, which alleviates some measurement inaccuracies and leads to higher effective resolution.

A Novel Automated Method for Analyzing Cylindrical Computed Tomography Data

Science.gov (United States)

Roth, D. J.; Burke, E. R.; Rauser, R. W.; Martin, R. E.

2011-01-01

A novel software method is presented that is applicable for analyzing cylindrical and partially cylindrical objects inspected using computed tomography. This method involves unwrapping and re-slicing data so that the CT data from the cylindrical object can be viewed as a series of 2-D sheets in the vertical direction in addition to volume rendering and normal plane views provided by traditional CT software. The method is based on interior and exterior surface edge detection and under proper conditions, is FULLY AUTOMATED and requires no input from the user except the correct voxel dimension from the CT scan. The software is available from NASA in 32- and 64-bit versions that can be applied to gigabyte-sized data sets, processing data either in random access memory or primarily on the computer hard drive. Please inquire with the presenting author if further interested. This software differentiates itself in total from other possible re-slicing software solutions due to complete automation and advanced processing and analysis capabilities.

Honeywell Modular Automation System Computer Software Documentation

International Nuclear Information System (INIS)

STUBBS, A.M.

2000-01-01

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System

High-Speed Video Analysis in a Conceptual Physics Class

Science.gov (United States)

Desbien, Dwain M.

2011-09-01

The use of probe ware and computers has become quite common in introductory physics classrooms. Video analysis is also becoming more popular and is available to a wide range of students through commercially available and/or free software.2,3 Video analysis allows for the study of motions that cannot be easily measured in the traditional lab setting and also allows real-world situations to be analyzed. Many motions are too fast to easily be captured at the standard video frame rate of 30 frames per second (fps) employed by most video cameras. This paper will discuss using a consumer camera that can record high-frame-rate video in a college-level conceptual physics class. In particular this will involve the use of model rockets to determine the acceleration during the boost period right at launch and compare it to a simple model of the expected acceleration.

Flip Video for Dummies

CERN Document Server

Hutsko, Joe

2010-01-01

The full-color guide to shooting great video with the Flip Video camera. The inexpensive Flip Video camera is currently one of the hottest must-have gadgets. It's portable and connects easily to any computer to transfer video you shoot onto your PC or Mac. Although the Flip Video camera comes with a quick-start guide, it lacks a how-to manual, and this full-color book fills that void! Packed with full-color screen shots throughout, Flip Video For Dummies shows you how to shoot the best possible footage in a variety of situations. You'll learn how to transfer video to your computer and then edi

Automated processing of massive audio/video content using FFmpeg

Directory of Open Access Journals (Sweden)

Kia Siang Hock

2014-01-01

Full Text Available Audio and video content forms an integral, important and expanding part of the digital collections in libraries and archives world-wide. While these memory institutions are familiar and well-versed in the management of more conventional materials such as books, periodicals, ephemera and images, the handling of audio (e.g., oral history recordings and video content (e.g., audio-visual recordings, broadcast content requires additional toolkits. In particular, a robust and comprehensive tool that provides a programmable interface is indispensable when dealing with tens of thousands of hours of audio and video content. FFmpeg is comprehensive and well-established open source software that is capable of the full-range of audio/video processing tasks (such as encode, decode, transcode, mux, demux, stream and filter. It is also capable of handling a wide-range of audio and video formats, a unique challenge in memory institutions. It comes with a command line interface, as well as a set of developer libraries that can be incorporated into applications.

Integrated Markov-neural reliability computation method: A case for multiple automated guided vehicle system

International Nuclear Information System (INIS)

Fazlollahtabar, Hamed; Saidi-Mehrabad, Mohammad; Balakrishnan, Jaydeep

2015-01-01

This paper proposes an integrated Markovian and back propagation neural network approaches to compute reliability of a system. While states of failure occurrences are significant elements for accurate reliability computation, Markovian based reliability assessment method is designed. Due to drawbacks shown by Markovian model for steady state reliability computations and neural network for initial training pattern, integration being called Markov-neural is developed and evaluated. To show efficiency of the proposed approach comparative analyses are performed. Also, for managerial implication purpose an application case for multiple automated guided vehicles (AGVs) in manufacturing networks is conducted. - Highlights: • Integrated Markovian and back propagation neural network approach to compute reliability. • Markovian based reliability assessment method. • Managerial implication is shown in an application case for multiple automated guided vehicles (AGVs) in manufacturing networks

Deception Detection in Videos

OpenAIRE

Wu, Zhe; Singh, Bharat; Davis, Larry S.; Subrahmanian, V. S.

2017-01-01

We present a system for covert automated deception detection in real-life courtroom trial videos. We study the importance of different modalities like vision, audio and text for this task. On the vision side, our system uses classifiers trained on low level video features which predict human micro-expressions. We show that predictions of high-level micro-expressions can be used as features for deception prediction. Surprisingly, IDT (Improved Dense Trajectory) features which have been widely ...

Ensemble of Chaotic and Naive Approaches for Performance Enhancement in Video Encryption

Directory of Open Access Journals (Sweden)

Jeyamala Chandrasekaran

2015-01-01

Full Text Available Owing to the growth of high performance network technologies, multimedia applications over the Internet are increasing exponentially. Applications like video conferencing, video-on-demand, and pay-per-view depend upon encryption algorithms for providing confidentiality. Video communication is characterized by distinct features such as large volume, high redundancy between adjacent frames, video codec compliance, syntax compliance, and application specific requirements. Naive approaches for video encryption encrypt the entire video stream with conventional text based cryptographic algorithms. Although naive approaches are the most secure for video encryption, the computational cost associated with them is very high. This research work aims at enhancing the speed of naive approaches through chaos based S-box design. Chaotic equations are popularly known for randomness, extreme sensitivity to initial conditions, and ergodicity. The proposed methodology employs two-dimensional discrete Henon map for (i generation of dynamic and key-dependent S-box that could be integrated with symmetric algorithms like Blowfish and Data Encryption Standard (DES and (ii generation of one-time keys for simple substitution ciphers. The proposed design is tested for randomness, nonlinearity, avalanche effect, bit independence criterion, and key sensitivity. Experimental results confirm that chaos based S-box design and key generation significantly reduce the computational cost of video encryption with no compromise in security.

a Sensor Aided H.264/AVC Video Encoder for Aerial Video Sequences with in the Loop Metadata Correction

Science.gov (United States)

Cicala, L.; Angelino, C. V.; Ruatta, G.; Baccaglini, E.; Raimondo, N.

2015-08-01

Unmanned Aerial Vehicles (UAVs) are often employed to collect high resolution images in order to perform image mosaicking and/or 3D reconstruction. Images are usually stored on board and then processed with on-ground desktop software. In such a way the computational load, and hence the power consumption, is moved on ground, leaving on board only the task of storing data. Such an approach is important in the case of small multi-rotorcraft UAVs because of their low endurance due to the short battery life. Images can be stored on board with either still image or video data compression. Still image system are preferred when low frame rates are involved, because video coding systems are based on motion estimation and compensation algorithms which fail when the motion vectors are significantly long and when the overlapping between subsequent frames is very small. In this scenario, UAVs attitude and position metadata from the Inertial Navigation System (INS) can be employed to estimate global motion parameters without video analysis. A low complexity image analysis can be still performed in order to refine the motion field estimated using only the metadata. In this work, we propose to use this refinement step in order to improve the position and attitude estimation produced by the navigation system in order to maximize the encoder performance. Experiments are performed on both simulated and real world video sequences.

Automated design of analog and high-frequency circuits a computational intelligence approach

CERN Document Server

Liu, Bo; Fernández, Francisco V

2014-01-01

Computational intelligence techniques are becoming more and more important for automated problem solving nowadays. Due to the growing complexity of industrial applications and the increasingly tight time-to-market requirements, the time available for thorough problem analysis and development of tailored solution methods is decreasing. There is no doubt that this trend will continue in the foreseeable future. Hence, it is not surprising that robust and general automated problem solving methods with satisfactory performance are needed.

Teaching French Transformational Grammar by Means of Computer-Generated Video-Tapes.

Science.gov (United States)

Adler, Alfred; Thomas, Jean Jacques

This paper describes a pilot program in an integrated media presentation of foreign languages and the production and usage of seven computer-generated video tapes which demonstrate various aspects of French syntax. This instructional set could form the basis for CAI lessons in which the student is presented images identical to those on the video…

Self-Censorship Regulatory Structure: Can We Control Political of Hates, Violence & Sex in Children Computer & Video Games?

OpenAIRE

Zanuddin, Hasmah

2008-01-01

This article examines some of the extreme negative content available to teenagers and young children in the market. Extreme negative values such as political of hates, violence and sex in some of the children computer and video games were made possible due to several factors such as lacking in regulatory structure, week policy implementation, rampant of illegal and uncensored materials. Computer and video games have been the subject of frequent controversy and censorship, due to the depiction...

The Effects of Video Game Experience on Computer-Based Air Traffic Controller Specialist, Air Traffic Scenario Test Scores.

Science.gov (United States)

1997-02-01

application with a strong resemblance to a video game , concern has been raised that prior video game experience might have a moderating effect on scores. Much...such as spatial ability. The effects of computer or video game experience on work sample scores have not been systematically investigated. The purpose...of this study was to evaluate the incremental validity of prior video game experience over that of general aptitude as a predictor of work sample test

An Adaptive Motion Segmentation for Automated Video Surveillance

Directory of Open Access Journals (Sweden)

Hossain MJulius

2008-01-01

Full Text Available This paper presents an adaptive motion segmentation algorithm utilizing spatiotemporal information of three most recent frames. The algorithm initially extracts the moving edges applying a novel flexible edge matching technique which makes use of a combined distance transformation image. Then watershed-based iterative algorithm is employed to segment the moving object region from the extracted moving edges. The challenges of existing three-frame-based methods include slow movement, edge localization error, minor movement of camera, and homogeneity of background and foreground region. The proposed method represents edges as segments and uses a flexible edge matching algorithm to deal with edge localization error and minor movement of camera. The combined distance transformation image works in favor of accumulating gradient information of overlapping region which effectively improves the sensitivity to slow movement. The segmentation algorithm uses watershed, gradient information of difference image, and extracted moving edges. It helps to segment moving object region with more accurate boundary even some part of the moving edges cannot be detected due to region homogeneity or other reasons during the detection step. Experimental results using different types of video sequences are presented to demonstrate the efficiency and accuracy of the proposed method.

Seeing is believing: video classification for computed tomographic colonography using multiple-instance learning.

Science.gov (United States)

Wang, Shijun; McKenna, Matthew T; Nguyen, Tan B; Burns, Joseph E; Petrick, Nicholas; Sahiner, Berkman; Summers, Ronald M

2012-05-01

In this paper, we present development and testing results for a novel colonic polyp classification method for use as part of a computed tomographic colonography (CTC) computer-aided detection (CAD) system. Inspired by the interpretative methodology of radiologists using 3-D fly-through mode in CTC reading, we have developed an algorithm which utilizes sequences of images (referred to here as videos) for classification of CAD marks. For each CAD mark, we created a video composed of a series of intraluminal, volume-rendered images visualizing the detection from multiple viewpoints. We then framed the video classification question as a multiple-instance learning (MIL) problem. Since a positive (negative) bag may contain negative (positive) instances, which in our case depends on the viewing angles and camera distance to the target, we developed a novel MIL paradigm to accommodate this class of problems. We solved the new MIL problem by maximizing a L2-norm soft margin using semidefinite programming, which can optimize relevant parameters automatically. We tested our method by analyzing a CTC data set obtained from 50 patients from three medical centers. Our proposed method showed significantly better performance compared with several traditional MIL methods.

Manual versus Automated Rodent Behavioral Assessment: Comparing Efficacy and Ease of Bederson and Garcia Neurological Deficit Scores to an Open Field Video-Tracking System.

Science.gov (United States)

Desland, Fiona A; Afzal, Aqeela; Warraich, Zuha; Mocco, J

2014-01-01

Animal models of stroke have been crucial in advancing our understanding of the pathophysiology of cerebral ischemia. Currently, the standards for determining neurological deficit in rodents are the Bederson and Garcia scales, manual assessments scoring animals based on parameters ranked on a narrow scale of severity. Automated open field analysis of a live-video tracking system that analyzes animal behavior may provide a more sensitive test. Results obtained from the manual Bederson and Garcia scales did not show significant differences between pre- and post-stroke animals in a small cohort. When using the same cohort, however, post-stroke data obtained from automated open field analysis showed significant differences in several parameters. Furthermore, large cohort analysis also demonstrated increased sensitivity with automated open field analysis versus the Bederson and Garcia scales. These early data indicate use of automated open field analysis software may provide a more sensitive assessment when compared to traditional Bederson and Garcia scales.

Manual versus Automated Rodent Behavioral Assessment: Comparing Efficacy and Ease of Bederson and Garcia Neurological Deficit Scores to an Open Field Video-Tracking System

Directory of Open Access Journals (Sweden)

Fiona A. Desland

2014-01-01

Full Text Available Animal models of stroke have been crucial in advancing our understanding of the pathophysiology of cerebral ischemia. Currently, the standards for determining neurological deficit in rodents are the Bederson and Garcia scales, manual assessments scoring animals based on parameters ranked on a narrow scale of severity. Automated open field analysis of a live-video tracking system that analyzes animal behavior may provide a more sensitive test. Results obtained from the manual Bederson and Garcia scales did not show significant differences between pre- and post-stroke animals in a small cohort. When using the same cohort, however, post-stroke data obtained from automated open field analysis showed significant differences in several parameters. Furthermore, large cohort analysis also demonstrated increased sensitivity with automated open field analysis versus the Bederson and Garcia scales. These early data indicate use of automated open field analysis software may provide a more sensitive assessment when compared to traditional Bederson and Garcia scales.

Concept of a computer network architecture for complete automation of nuclear power plants

International Nuclear Information System (INIS)

Edwards, R.M.; Ray, A.

1990-01-01

The state of the art in automation of nuclear power plants has been largely limited to computerized data acquisition, monitoring, display, and recording of process signals. Complete automation of nuclear power plants, which would include plant operations, control, and management, fault diagnosis, and system reconfiguration with efficient and reliable man/machine interactions, has been projected as a realistic goal. This paper presents the concept of a computer network architecture that would use a high-speed optical data highway to integrate diverse, interacting, and spatially distributed functions that are essential for a fully automated nuclear power plant

Collaborative and Competitive Video Games for Teaching Computing in Higher Education

Science.gov (United States)

Smith, Spencer; Chan, Samantha

2017-01-01

This study measures the success of using a collaborative and competitive video game, named Space Race, to teach computing to first year engineering students. Space Race is played by teams of four, each with their own tablet, collaborating to compete against the other teams in the class. The impact of the game on student learning was studied…

Video and Computer Games: Effect on Children and Implications for Health Education.

Science.gov (United States)

Dorman, Steve M.

1997-01-01

Video and computer games have assumed a prominent role in the culture of U.S. children and adolescents. The paper examines the health effects of these games, suggests criteria upon which parents and teachers may evaluate the games, and notes some implications for health educators. (SM)

Towards Robust Face Recognition from Video

International Nuclear Information System (INIS)

Price, JR

2001-01-01

A novel, template-based method for face recognition is presented. The goals of the proposed method are to integrate multiple observations for improved robustness and to provide auxiliary confidence data for subsequent use in an automated video surveillance system. The proposed framework consists of a parallel system of classifiers, referred to as observers, where each observer is trained on one face region. The observer outputs are combined to yield the final recognition result. Three of the four confounding factors-expression, illumination, and decoration-are specifically addressed in this paper. The extension of the proposed approach to address the fourth confounding factor-pose-is straightforward and well supported in previous work. A further contribution of the proposed approach is the computation of a revealing confidence measure. This confidence measure will aid the subsequent application of the proposed method to video surveillance scenarios. Results are reported for a database comprising 676 images of 160 subjects under a variety of challenging circumstances. These results indicate significant performance improvements over previous methods and demonstrate the usefulness of the confidence data

Terminal Performance of Lead Free Pistol Bullets in Ballistic Gelatin Using Retarding Force Analysis from High Speed Video

Science.gov (United States)

2016-04-04

acceleration can be calculated. The change in kinetic energy can also be computed. In the video, temporary and permanent cavities are also visible. In this...notable that the video method above also allows the energy deposited as a funtion of penetration depth to be computed, when velocity is expressed...deposit as a function of penetration depth. The approach in this study employs the energy lost by the bullet in the first 15 cm of penetration , E15

An Automated Motion Detection and Reward System for Animal Training.

Science.gov (United States)

Miller, Brad; Lim, Audrey N; Heidbreder, Arnold F; Black, Kevin J

2015-12-04

A variety of approaches has been used to minimize head movement during functional brain imaging studies in awake laboratory animals. Many laboratories expend substantial effort and time training animals to remain essentially motionless during such studies. We could not locate an "off-the-shelf" automated training system that suited our needs.  We developed a time- and labor-saving automated system to train animals to hold still for extended periods of time. The system uses a personal computer and modest external hardware to provide stimulus cues, monitor movement using commercial video surveillance components, and dispense rewards. A custom computer program automatically increases the motionless duration required for rewards based on performance during the training session but allows changes during sessions. This system was used to train cynomolgus monkeys (Macaca fascicularis) for awake neuroimaging studies using positron emission tomography (PET) and functional magnetic resonance imaging (fMRI). The automated system saved the trainer substantial time, presented stimuli and rewards in a highly consistent manner, and automatically documented training sessions. We have limited data to prove the training system's success, drawn from the automated records during training sessions, but we believe others may find it useful. The system can be adapted to a range of behavioral training/recording activities for research or commercial applications, and the software is freely available for non-commercial use.

Computer program CDCID: an automated quality control program using CDC update

International Nuclear Information System (INIS)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. The computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program

Automating quantum experiment control

Science.gov (United States)

Stevens, Kelly E.; Amini, Jason M.; Doret, S. Charles; Mohler, Greg; Volin, Curtis; Harter, Alexa W.

2017-03-01

The field of quantum information processing is rapidly advancing. As the control of quantum systems approaches the level needed for useful computation, the physical hardware underlying the quantum systems is becoming increasingly complex. It is already becoming impractical to manually code control for the larger hardware implementations. In this chapter, we will employ an approach to the problem of system control that parallels compiler design for a classical computer. We will start with a candidate quantum computing technology, the surface electrode ion trap, and build a system instruction language which can be generated from a simple machine-independent programming language via compilation. We incorporate compile time generation of ion routing that separates the algorithm description from the physical geometry of the hardware. Extending this approach to automatic routing at run time allows for automated initialization of qubit number and placement and additionally allows for automated recovery after catastrophic events such as qubit loss. To show that these systems can handle real hardware, we present a simple demonstration system that routes two ions around a multi-zone ion trap and handles ion loss and ion placement. While we will mainly use examples from transport-based ion trap quantum computing, many of the issues and solutions are applicable to other architectures.

Computer software configuration management plan for the Honeywell modular automation system

International Nuclear Information System (INIS)

Cunningham, L.T.

1997-01-01

This document provides a Computer Software management plan for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This type of system will be used to control new thermal stabilization furnaces, a vertical denitrator calciner, and a pyrolysis furnace

Real-time pedestrian detection with the videos of car camera

Directory of Open Access Journals (Sweden)

Yunling Zhang

2015-12-01

Full Text Available Pedestrians in the vehicle path are in danger of being hit, thus causing severe injury to pedestrians and vehicle occupants. Therefore, real-time pedestrian detection with the video of vehicle-mounted camera is of great significance to vehicle–pedestrian collision warning and traffic safety of self-driving car. In this article, a real-time scheme was proposed based on integral channel features and graphics processing unit. The proposed method does not need to resize the input image. Moreover, the computationally expensive convolution of the detectors and the input image was converted into the dot product of two larger matrixes, which can be computed effectively using a graphics processing unit. The experiments showed that the proposed method could be employed to detect pedestrians in the video of car camera at 20+ frames per second with acceptable error rates. Thus, it can be applied in real-time detection tasks with the videos of car camera.

The implementation of Project-Based Learning in courses Audio Video to Improve Employability Skills

Science.gov (United States)

Sulistiyo, Edy; Kustono, Djoko; Purnomo; Sutaji, Eddy

2018-04-01

This paper presents a project-based learning (PjBL) in subjects with Audio Video the Study Programme Electro Engineering Universitas Negeri Surabaya which consists of two ways namely the design of the prototype audio-video and assessment activities project-based learning tailored to the skills of the 21st century in the form of employability skills. The purpose of learning innovation is applying the lab work obtained in the theory classes. The PjBL aims to motivate students, centering on the problems of teaching in accordance with the world of work. Measures of learning include; determine the fundamental questions, designs, develop a schedule, monitor the learners and progress, test the results, evaluate the experience, project assessment, and product assessment. The results of research conducted showed the level of mastery of the ability to design tasks (of 78.6%), technical planning (39,3%), creativity (42,9%), innovative (46,4%), problem solving skills (the 57.1%), skill to communicate (75%), oral expression (75%), searching and understanding information (to 64.3%), collaborative work skills (71,4%), and classroom conduct (of 78.6%). In conclusion, instructors have to do the reflection and make improvements in some of the aspects that have a level of mastery of the skills less than 60% both on the application of project-based learning courses, audio video.

a Cloud-Based Architecture for Smart Video Surveillance

Science.gov (United States)

Valentín, L.; Serrano, S. A.; Oves García, R.; Andrade, A.; Palacios-Alonso, M. A.; Sucar, L. Enrique

2017-09-01

Turning a city into a smart city has attracted considerable attention. A smart city can be seen as a city that uses digital technology not only to improve the quality of people's life, but also, to have a positive impact in the environment and, at the same time, offer efficient and easy-to-use services. A fundamental aspect to be considered in a smart city is people's safety and welfare, therefore, having a good security system becomes a necessity, because it allows us to detect and identify potential risk situations, and then take appropriate decisions to help people or even prevent criminal acts. In this paper we present an architecture for automated video surveillance based on the cloud computing schema capable of acquiring a video stream from a set of cameras connected to the network, process that information, detect, label and highlight security-relevant events automatically, store the information and provide situational awareness in order to minimize response time to take the appropriate action.

Integration of multispectral face recognition and multi-PTZ camera automated surveillance for security applications

Science.gov (United States)

Chen, Chung-Hao; Yao, Yi; Chang, Hong; Koschan, Andreas; Abidi, Mongi

2013-06-01

Due to increasing security concerns, a complete security system should consist of two major components, a computer-based face-recognition system and a real-time automated video surveillance system. A computerbased face-recognition system can be used in gate access control for identity authentication. In recent studies, multispectral imaging and fusion of multispectral narrow-band images in the visible spectrum have been employed and proven to enhance the recognition performance over conventional broad-band images, especially when the illumination changes. Thus, we present an automated method that specifies the optimal spectral ranges under the given illumination. Experimental results verify the consistent performance of our algorithm via the observation that an identical set of spectral band images is selected under all tested conditions. Our discovery can be practically used for a new customized sensor design associated with given illuminations for an improved face recognition performance over conventional broad-band images. In addition, once a person is authorized to enter a restricted area, we still need to continuously monitor his/her activities for the sake of security. Because pantilt-zoom (PTZ) cameras are capable of covering a panoramic area and maintaining high resolution imagery for real-time behavior understanding, researches in automated surveillance systems with multiple PTZ cameras have become increasingly important. Most existing algorithms require the prior knowledge of intrinsic parameters of the PTZ camera to infer the relative positioning and orientation among multiple PTZ cameras. To overcome this limitation, we propose a novel mapping algorithm that derives the relative positioning and orientation between two PTZ cameras based on a unified polynomial model. This reduces the dependence on the knowledge of intrinsic parameters of PTZ camera and relative positions. Experimental results demonstrate that our proposed algorithm presents substantially

Web Audio/Video Streaming Tool

Science.gov (United States)

Guruvadoo, Eranna K.

2003-01-01

In order to promote NASA-wide educational outreach program to educate and inform the public of space exploration, NASA, at Kennedy Space Center, is seeking efficient ways to add more contents to the web by streaming audio/video files. This project proposes a high level overview of a framework for the creation, management, and scheduling of audio/video assets over the web. To support short-term goals, the prototype of a web-based tool is designed and demonstrated to automate the process of streaming audio/video files. The tool provides web-enabled users interfaces to manage video assets, create publishable schedules of video assets for streaming, and schedule the streaming events. These operations are performed on user-defined and system-derived metadata of audio/video assets stored in a relational database while the assets reside on separate repository. The prototype tool is designed using ColdFusion 5.0.

Feasibility of automated speech sample collection with stuttering children using interactive voice response (IVR) technology.

Science.gov (United States)

Vogel, Adam P; Block, Susan; Kefalianos, Elaina; Onslow, Mark; Eadie, Patricia; Barth, Ben; Conway, Laura; Mundt, James C; Reilly, Sheena

2015-04-01

To investigate the feasibility of adopting automated interactive voice response (IVR) technology for remotely capturing standardized speech samples from stuttering children. Participants were 10 6-year-old stuttering children. Their parents called a toll-free number from their homes and were prompted to elicit speech from their children using a standard protocol involving conversation, picture description and games. The automated IVR system was implemented using an off-the-shelf telephony software program and delivered by a standard desktop computer. The software infrastructure utilizes voice over internet protocol. Speech samples were automatically recorded during the calls. Video recordings were simultaneously acquired in the home at the time of the call to evaluate the fidelity of the telephone collected samples. Key outcome measures included syllables spoken, percentage of syllables stuttered and an overall rating of stuttering severity using a 10-point scale. Data revealed a high level of relative reliability in terms of intra-class correlation between the video and telephone acquired samples on all outcome measures during the conversation task. Findings were less consistent for speech samples during picture description and games. Results suggest that IVR technology can be used successfully to automate remote capture of child speech samples.

Robotic Automation in Computer Controlled Polishing

Science.gov (United States)

Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

2016-02-01

We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

Computationally efficient video restoration for Nyquist sampled imaging sensors combining an affine-motion-based temporal Kalman filter and adaptive Wiener filter.

Science.gov (United States)

Rucci, Michael; Hardie, Russell C; Barnard, Kenneth J

2014-05-01

In this paper, we present a computationally efficient video restoration algorithm to address both blur and noise for a Nyquist sampled imaging system. The proposed method utilizes a temporal Kalman filter followed by a correlation-model based spatial adaptive Wiener filter (AWF). The Kalman filter employs an affine background motion model and novel process-noise variance estimate. We also propose and demonstrate a new multidelay temporal Kalman filter designed to more robustly treat local motion. The AWF is a spatial operation that performs deconvolution and adapts to the spatially varying residual noise left in the Kalman filter stage. In image areas where the temporal Kalman filter is able to provide significant noise reduction, the AWF can be aggressive in its deconvolution. In other areas, where less noise reduction is achieved with the Kalman filter, the AWF balances the deconvolution with spatial noise reduction. In this way, the Kalman filter and AWF work together effectively, but without the computational burden of full joint spatiotemporal processing. We also propose a novel hybrid system that combines a temporal Kalman filter and BM3D processing. To illustrate the efficacy of the proposed methods, we test the algorithms on both simulated imagery and video collected with a visible camera.

Influencing Trust for Human-Automation Collaborative Scheduling of Multiple Unmanned Vehicles.

Science.gov (United States)

Clare, Andrew S; Cummings, Mary L; Repenning, Nelson P

2015-11-01

We examined the impact of priming on operator trust and system performance when supervising a decentralized network of heterogeneous unmanned vehicles (UVs). Advances in autonomy have enabled a future vision of single-operator control of multiple heterogeneous UVs. Real-time scheduling for multiple UVs in uncertain environments requires the computational ability of optimization algorithms combined with the judgment and adaptability of human supervisors. Because of system and environmental uncertainty, appropriate operator trust will be instrumental to maintain high system performance and prevent cognitive overload. Three groups of operators experienced different levels of trust priming prior to conducting simulated missions in an existing, multiple-UV simulation environment. Participants who play computer and video games frequently were found to have a higher propensity to overtrust automation. By priming gamers to lower their initial trust to a more appropriate level, system performance was improved by 10% as compared to gamers who were primed to have higher trust in the automation. Priming was successful at adjusting the operator's initial and dynamic trust in the automated scheduling algorithm, which had a substantial impact on system performance. These results have important implications for personnel selection and training for futuristic multi-UV systems under human supervision. Although gamers may bring valuable skills, they may also be potentially prone to automation bias. Priming during training and regular priming throughout missions may be one potential method for overcoming this propensity to overtrust automation. © 2015, Human Factors and Ergonomics Society.

Automation of multi-agent control for complex dynamic systems in heterogeneous computational network

Science.gov (United States)

Oparin, Gennady; Feoktistov, Alexander; Bogdanova, Vera; Sidorov, Ivan

2017-01-01

The rapid progress of high-performance computing entails new challenges related to solving large scientific problems for various subject domains in a heterogeneous distributed computing environment (e.g., a network, Grid system, or Cloud infrastructure). The specialists in the field of parallel and distributed computing give the special attention to a scalability of applications for problem solving. An effective management of the scalable application in the heterogeneous distributed computing environment is still a non-trivial issue. Control systems that operate in networks, especially relate to this issue. We propose a new approach to the multi-agent management for the scalable applications in the heterogeneous computational network. The fundamentals of our approach are the integrated use of conceptual programming, simulation modeling, network monitoring, multi-agent management, and service-oriented programming. We developed a special framework for an automation of the problem solving. Advantages of the proposed approach are demonstrated on the parametric synthesis example of the static linear regulator for complex dynamic systems. Benefits of the scalable application for solving this problem include automation of the multi-agent control for the systems in a parallel mode with various degrees of its detailed elaboration.

Objectively Determining the Educational Potential of Computer and Video-Based Courseware; or, Producing Reliable Evaluations Despite the Dog and Pony Show.

Science.gov (United States)

Barrett, Andrew J.; And Others

The Center for Interactive Technology, Applications, and Research at the College of Engineering of the University of South Florida (Tampa) has developed objective and descriptive evaluation models to assist in determining the educational potential of computer and video courseware. The computer-based courseware evaluation model and the video-based…

Collaborative and Competitive Video Games for Teaching Computing in Higher Education

Science.gov (United States)

Smith, Spencer; Chan, Samantha

2017-08-01

This study measures the success of using a collaborative and competitive video game, named Space Race, to teach computing to first year engineering students. Space Race is played by teams of four, each with their own tablet, collaborating to compete against the other teams in the class. The impact of the game on student learning was studied through measurements using 485 students, over one term. Surveys were used to gauge student reception of the game. Pre and post-tests, and in-course examinations were used to quantify student performance. The game was well received with at least 82% of the students that played it recommending it to others. In some cases, game participants outperformed non-participants on course exams. On the final course exam, all of the statistically significant ( pgame participants on the questions, with a maximum grade improvement of 41%. The findings also suggest that some students retain the knowledge obtained from Space Race for at least 7 weeks. The results of this study provide strong evidence that a collaborative and competitive video game can be an effective tool for teaching computing in post-secondary education.

Automating ATLAS Computing Operations using the Site Status Board

CERN Document Server

Andreeva, J; The ATLAS collaboration; Campana, S; Di Girolamo, A; Espinal Curull, X; Gayazov, S; Magradze, E; Nowotka, MM; Rinaldi, L; Saiz, P; Schovancova, J; Stewart, GA; Wright, M

2012-01-01

The automation of operations is essential to reduce manpower costs and improve the reliability of the system. The Site Status Board (SSB) is a framework which allows Virtual Organizations to monitor their computing activities at distributed sites and to evaluate site performance. The ATLAS experiment intensively uses SSB for the distributed computing shifts, for estimating data processing and data transfer efficiencies at a particular site, and for implementing automatic exclusion of sites from computing activities, in case of potential problems. ATLAS SSB provides a real-time aggregated monitoring view and keeps the history of the monitoring metrics. Based on this history, usability of a site from the perspective of ATLAS is calculated. The presentation will describe how SSB is integrated in the ATLAS operations and computing infrastructure and will cover implementation details of the ATLAS SSB sensors and alarm system, based on the information in SSB. It will demonstrate the positive impact of the use of SS...

Automated uncertainty analysis methods in the FRAP computer codes

International Nuclear Information System (INIS)

Peck, S.O.

1980-01-01

A user oriented, automated uncertainty analysis capability has been incorporated in the Fuel Rod Analysis Program (FRAP) computer codes. The FRAP codes have been developed for the analysis of Light Water Reactor fuel rod behavior during steady state (FRAPCON) and transient (FRAP-T) conditions as part of the United States Nuclear Regulatory Commission's Water Reactor Safety Research Program. The objective of uncertainty analysis of these codes is to obtain estimates of the uncertainty in computed outputs of the codes is to obtain estimates of the uncertainty in computed outputs of the codes as a function of known uncertainties in input variables. This paper presents the methods used to generate an uncertainty analysis of a large computer code, discusses the assumptions that are made, and shows techniques for testing them. An uncertainty analysis of FRAP-T calculated fuel rod behavior during a hypothetical loss-of-coolant transient is presented as an example and carried through the discussion to illustrate the various concepts

[Computer-assisted therapy and video games in psychosocial rehabilitation for schizophrenia patients].

Science.gov (United States)

Brun, G; Verdoux, H; Couhet, G; Quiles, C

2018-02-28

Video games and virtual reality have recently become used by clinicians for training or information media or as therapeutic tools. The purpose is to review the use of these technologies for therapy destined for schizophrenia patients. We conducted a review in October 2016 using Pubmed, Scopus and PsychInfo using the following Medical Subject Headings (MESH): "video games", "virtual reality" and "therapy, computer-assisted/methods", each associated with "schizophrenia". Papers were included in the review if: (a) they were published in an English, Spanish or French-language peer-reviewed journal, (b) the study enrolled patients with schizophrenia or schizo-affective disorder, (c) the patients used a therapeutic video game or therapeutic virtual reality device. Eighteen publications were included. The devices studied are mainly therapeutic software developed specifically for therapeutic care. They can be classified according to their therapeutic objectives. These targets corresponded to objectives of psychosocial rehabilitation: improvement of residual symptomatology, cognitive remediation, remediation of cognition and social skills, improvement of everyday life activities, support for occupational integration. Very different devices were proposed. Some researchers analysed programs developed specifically for patients with schizophrenia, while others were interested in the impact of commercial games. Most of the studies were recent, preliminary and European. The impact of these devices was globally positive, particularly concerning cognitive functions. Computer-assisted therapy, video games and virtual reality cannot replace usual care but could be used as adjunctive therapy. However, recommending their use seems premature because of the recent and preliminary character of most studies. Moreover, a link is still lacking between this field of research in psychiatry and other fields of research, particularly game studies. Finally, it might be interesting to analyse more

Bidirectional uncompressed HD video distribution over fiber employing VCSELs

DEFF Research Database (Denmark)

Estaran Tolosa, Jose Manuel; Vegas Olmos, Juan José; Rodes, G. A.

2012-01-01

We report on a bidirectional system in which VCSELs are simultaneously modulated with two uncompressed HD video signals. The results show a large power budget and a negligible penalty over 10 km long transmission links.......We report on a bidirectional system in which VCSELs are simultaneously modulated with two uncompressed HD video signals. The results show a large power budget and a negligible penalty over 10 km long transmission links....

Automated detection of heuristics and biases among pathologists in a computer-based system.

Science.gov (United States)

Crowley, Rebecca S; Legowski, Elizabeth; Medvedeva, Olga; Reitmeyer, Kayse; Tseytlin, Eugene; Castine, Melissa; Jukic, Drazen; Mello-Thoms, Claudia

2013-08-01

The purpose of this study is threefold: (1) to develop an automated, computer-based method to detect heuristics and biases as pathologists examine virtual slide cases, (2) to measure the frequency and distribution of heuristics and errors across three levels of training, and (3) to examine relationships of heuristics to biases, and biases to diagnostic errors. The authors conducted the study using a computer-based system to view and diagnose virtual slide cases. The software recorded participant responses throughout the diagnostic process, and automatically classified participant actions based on definitions of eight common heuristics and/or biases. The authors measured frequency of heuristic use and bias across three levels of training. Biases studied were detected at varying frequencies, with availability and search satisficing observed most frequently. There were few significant differences by level of training. For representativeness and anchoring, the heuristic was used appropriately as often or more often than it was used in biased judgment. Approximately half of the diagnostic errors were associated with one or more biases. We conclude that heuristic use and biases were observed among physicians at all levels of training using the virtual slide system, although their frequencies varied. The system can be employed to detect heuristic use and to test methods for decreasing diagnostic errors resulting from cognitive biases.

Efficient Enhancement for Spatial Scalable Video Coding Transmission

Directory of Open Access Journals (Sweden)

Mayada Khairy

2017-01-01

Full Text Available Scalable Video Coding (SVC is an international standard technique for video compression. It is an extension of H.264 Advanced Video Coding (AVC. In the encoding of video streams by SVC, it is suitable to employ the macroblock (MB mode because it affords superior coding efficiency. However, the exhaustive mode decision technique that is usually used for SVC increases the computational complexity, resulting in a longer encoding time (ET. Many other algorithms were proposed to solve this problem with imperfection of increasing transmission time (TT across the network. To minimize the ET and TT, this paper introduces four efficient algorithms based on spatial scalability. The algorithms utilize the mode-distribution correlation between the base layer (BL and enhancement layers (ELs and interpolation between the EL frames. The proposed algorithms are of two categories. Those of the first category are based on interlayer residual SVC spatial scalability. They employ two methods, namely, interlayer interpolation (ILIP and the interlayer base mode (ILBM method, and enable ET and TT savings of up to 69.3% and 83.6%, respectively. The algorithms of the second category are based on full-search SVC spatial scalability. They utilize two methods, namely, full interpolation (FIP and the full-base mode (FBM method, and enable ET and TT savings of up to 55.3% and 76.6%, respectively.

Gender stereotypes, aggression, and computer games: an online survey of women.

Science.gov (United States)

Norris, Kamala O

2004-12-01

Computer games were conceptualized as a potential mode of entry into computer-related employment for women. Computer games contain increasing levels of realism and violence, as well as biased gender portrayals. It has been suggested that aggressive personality characteristics attract people to aggressive video games, and that more women do not play computer games because they are socialized to be non-aggressive. To explore gender identity and aggressive personality in the context of computers, an online survey was conducted on women who played computer games and women who used the computer but did not play computer games. Women who played computer games perceived their online environments as less friendly but experienced less sexual harassment online, were more aggressive themselves, and did not differ in gender identity, degree of sex role stereotyping, or acceptance of sexual violence when compared to women who used the computer but did not play video games. Finally, computer gaming was associated with decreased participation in computer-related employment; however, women with high masculine gender identities were more likely to use computers at work.

3S-R10 automated RBS system

International Nuclear Information System (INIS)

Norton, G.A.; Schroeder, J.B.; Klody, G.M.; Strathman, M.D.

1989-01-01

The NEC 3S-R10 automated RBS spectrometer system includes the features required for routine application of Rutherford backscattering (RBS) and related techniques for materials analysis in both research and industrial settings. The NEC Model 3SDH Pelletron accelerator system provides stable, monoenergetic beams of helium ions up to 3.3 MeV and protons to 2.2 MeV and has heavy ion capability. The analytical end station is the fully computerized Charles Evans and Associates Model RBS-400. Automated features include sample positioning (precision 4-axis goniometer), channeling alignment, polar plot generation, and data acquisition and reduction. Computer automation of accelerator and chamber functions includes storage and recall of operating parameters. Unattended data acquisition, e.g., overnight or over a weekend, is possible for up to 100 samples per batch for random orientation, rotating random or channeling analyses at any sample location. Single samples may be up to 50 cm in diameter. A laser for sample alignment and a TV for video monitoring are included. Simultaneous detection (up to 4 detectors) at normal and grazing angles, external control of grazing angle detector position, and transmission scattering capabiltiy enhance system flexibility. The system is also compatible with PIXE, NRA, and hydrogen forward-backscattering analyses. Data reduction is part of the computer system, which features displays (several formats) and manipulation of up to five spectra at one time using constant multipliers or point by point operations between spectra. (orig.)

Quantification of lung fibrosis and emphysema in mice using automated micro-computed tomography.

Directory of Open Access Journals (Sweden)

Ellen De Langhe

Full Text Available BACKGROUND: In vivo high-resolution micro-computed tomography allows for longitudinal image-based measurements in animal models of lung disease. The combination of repetitive high resolution imaging with fully automated quantitative image analysis in mouse models of lung fibrosis lung benefits preclinical research. This study aimed to develop and validate such an automated micro-computed tomography analysis algorithm for quantification of aerated lung volume in mice; an indicator of pulmonary fibrosis and emphysema severity. METHODOLOGY: Mice received an intratracheal instillation of bleomycin (n = 8, elastase (0.25 U elastase n = 9, 0.5 U elastase n = 8 or saline control (n = 6 for fibrosis, n = 5 for emphysema. A subset of mice was scanned without intervention, to evaluate potential radiation-induced toxicity (n = 4. Some bleomycin-instilled mice were treated with imatinib for proof of concept (n = 8. Mice were scanned weekly, until four weeks after induction, when they underwent pulmonary function testing, lung histology and collagen quantification. Aerated lung volumes were calculated with our automated algorithm. PRINCIPAL FINDINGS: Our automated image-based aerated lung volume quantification method is reproducible with low intra-subject variability. Bleomycin-treated mice had significantly lower scan-derived aerated lung volumes, compared to controls. Aerated lung volume correlated with the histopathological fibrosis score and total lung collagen content. Inversely, a dose-dependent increase in lung volume was observed in elastase-treated mice. Serial scanning of individual mice is feasible and visualized dynamic disease progression. No radiation-induced toxicity was observed. Three-dimensional images provided critical topographical information. CONCLUSIONS: We report on a high resolution in vivo micro-computed tomography image analysis algorithm that runs fully automated and allows quantification of aerated lung volume in mice. This

The 3D Human Motion Control Through Refined Video Gesture Annotation

Science.gov (United States)

Jin, Yohan; Suk, Myunghoon; Prabhakaran, B.

In the beginning of computer and video game industry, simple game controllers consisting of buttons and joysticks were employed, but recently game consoles are replacing joystick buttons with novel interfaces such as the remote controllers with motion sensing technology on the Nintendo Wii [1] Especially video-based human computer interaction (HCI) technique has been applied to games, and the representative game is 'Eyetoy' on the Sony PlayStation 2. Video-based HCI technique has great benefit to release players from the intractable game controller. Moreover, in order to communicate between humans and computers, video-based HCI is very crucial since it is intuitive, easy to get, and inexpensive. On the one hand, extracting semantic low-level features from video human motion data is still a major challenge. The level of accuracy is really dependent on each subject's characteristic and environmental noises. Of late, people have been using 3D motion-capture data for visualizing real human motions in 3D space (e.g, 'Tiger Woods' in EA Sports, 'Angelina Jolie' in Bear-Wolf movie) and analyzing motions for specific performance (e.g, 'golf swing' and 'walking'). 3D motion-capture system ('VICON') generates a matrix for each motion clip. Here, a column is corresponding to a human's sub-body part and row represents time frames of data capture. Thus, we can extract sub-body part's motion only by selecting specific columns. Different from low-level feature values of video human motion, 3D human motion-capture data matrix are not pixel values, but is closer to human level of semantics.

A semantic autonomous video surveillance system for dense camera networks in Smart Cities.

Science.gov (United States)

Calavia, Lorena; Baladrón, Carlos; Aguiar, Javier M; Carro, Belén; Sánchez-Esguevillas, Antonio

2012-01-01

This paper presents a proposal of an intelligent video surveillance system able to detect and identify abnormal and alarming situations by analyzing object movement. The system is designed to minimize video processing and transmission, thus allowing a large number of cameras to be deployed on the system, and therefore making it suitable for its usage as an integrated safety and security solution in Smart Cities. Alarm detection is performed on the basis of parameters of the moving objects and their trajectories, and is performed using semantic reasoning and ontologies. This means that the system employs a high-level conceptual language easy to understand for human operators, capable of raising enriched alarms with descriptions of what is happening on the image, and to automate reactions to them such as alerting the appropriate emergency services using the Smart City safety network.

A Semantic Autonomous Video Surveillance System for Dense Camera Networks in Smart Cities

Directory of Open Access Journals (Sweden)

Antonio Sánchez-Esguevillas

2012-08-01

Full Text Available This paper presents a proposal of an intelligent video surveillance system able to detect and identify abnormal and alarming situations by analyzing object movement. The system is designed to minimize video processing and transmission, thus allowing a large number of cameras to be deployed on the system, and therefore making it suitable for its usage as an integrated safety and security solution in Smart Cities. Alarm detection is performed on the basis of parameters of the moving objects and their trajectories, and is performed using semantic reasoning and ontologies. This means that the system employs a high-level conceptual language easy to understand for human operators, capable of raising enriched alarms with descriptions of what is happening on the image, and to automate reactions to them such as alerting the appropriate emergency services using the Smart City safety network.

Computational needs survey of NASA automation and robotics missions. Volume 2: Appendixes

Science.gov (United States)

Davis, Gloria J.

1991-01-01

NASA's operational use of advanced processor technology in space systems lags behind its commercial development by more than eight years. One of the factors contributing to this is the fact that mission computing requirements are frequency unknown, unstated, misrepresented, or simply not available in a timely manner. NASA must provide clear common requirements to make better use of available technology, to cut development lead time on deployable architectures, and to increase the utilization of new technology. Here, NASA, industry and academic communities are provided with a preliminary set of advanced mission computational processing requirements of automation and robotics (A and R) systems. The results were obtained in an assessment of the computational needs of current projects throughout NASA. The high percent of responses indicated a general need for enhanced computational capabilities beyond the currently available 80386 and 68020 processor technology. Because of the need for faster processors and more memory, 90 percent of the polled automation projects have reduced or will reduce the scope of their implemented capabilities. The requirements are presented with respect to their targeted environment, identifying the applications required, system performance levels necessary to support them, and the degree to which they are met with typical programmatic constraints. Here, appendixes are provided.

In-House Automation of a Small Library Using a Mainframe Computer.

Science.gov (United States)

Waranius, Frances B.; Tellier, Stephen H.

1986-01-01

An automated library routine management system was developed in-house to create system unique to the Library and Information Center, Lunar and Planetary Institute, Houston, Texas. A modular approach was used to allow continuity in operations and services as system was implemented. Acronyms and computer accounts and file names are appended.…

Linear array of photodiodes to track a human speaker for video recording

International Nuclear Information System (INIS)

DeTone, D; Neal, H; Lougheed, R

2012-01-01

Communication and collaboration using stored digital media has garnered more interest by many areas of business, government and education in recent years. This is due primarily to improvements in the quality of cameras and speed of computers. An advantage of digital media is that it can serve as an effective alternative when physical interaction is not possible. Video recordings that allow for viewers to discern a presenter's facial features, lips and hand motions are more effective than videos that do not. To attain this, one must maintain a video capture in which the speaker occupies a significant portion of the captured pixels. However, camera operators are costly, and often do an imperfect job of tracking presenters in unrehearsed situations. This creates motivation for a robust, automated system that directs a video camera to follow a presenter as he or she walks anywhere in the front of a lecture hall or large conference room. Such a system is presented. The system consists of a commercial, off-the-shelf pan/tilt/zoom (PTZ) color video camera, a necklace of infrared LEDs and a linear photodiode array detector. Electronic output from the photodiode array is processed to generate the location of the LED necklace, which is worn by a human speaker. The computer controls the video camera movements to record video of the speaker. The speaker's vertical position and depth are assumed to remain relatively constant– the video camera is sent only panning (horizontal) movement commands. The LED necklace is flashed at 70Hz at a 50% duty cycle to provide noise-filtering capability. The benefit to using a photodiode array versus a standard video camera is its higher frame rate (4kHz vs. 60Hz). The higher frame rate allows for the filtering of infrared noise such as sunlight and indoor lighting–a capability absent from other tracking technologies. The system has been tested in a large lecture hall and is shown to be effective.

Linear array of photodiodes to track a human speaker for video recording

Science.gov (United States)

DeTone, D.; Neal, H.; Lougheed, R.

2012-12-01

Communication and collaboration using stored digital media has garnered more interest by many areas of business, government and education in recent years. This is due primarily to improvements in the quality of cameras and speed of computers. An advantage of digital media is that it can serve as an effective alternative when physical interaction is not possible. Video recordings that allow for viewers to discern a presenter's facial features, lips and hand motions are more effective than videos that do not. To attain this, one must maintain a video capture in which the speaker occupies a significant portion of the captured pixels. However, camera operators are costly, and often do an imperfect job of tracking presenters in unrehearsed situations. This creates motivation for a robust, automated system that directs a video camera to follow a presenter as he or she walks anywhere in the front of a lecture hall or large conference room. Such a system is presented. The system consists of a commercial, off-the-shelf pan/tilt/zoom (PTZ) color video camera, a necklace of infrared LEDs and a linear photodiode array detector. Electronic output from the photodiode array is processed to generate the location of the LED necklace, which is worn by a human speaker. The computer controls the video camera movements to record video of the speaker. The speaker's vertical position and depth are assumed to remain relatively constant- the video camera is sent only panning (horizontal) movement commands. The LED necklace is flashed at 70Hz at a 50% duty cycle to provide noise-filtering capability. The benefit to using a photodiode array versus a standard video camera is its higher frame rate (4kHz vs. 60Hz). The higher frame rate allows for the filtering of infrared noise such as sunlight and indoor lighting-a capability absent from other tracking technologies. The system has been tested in a large lecture hall and is shown to be effective.

Automated Reporting of DXA Studies Using a Custom-Built Computer Program.

Science.gov (United States)

England, Joseph R; Colletti, Patrick M

2018-06-01

Dual-energy x-ray absorptiometry (DXA) scans are a critical population health tool and relatively simple to interpret but can be time consuming to report, often requiring manual transfer of bone mineral density and associated statistics into commercially available dictation systems. We describe here a custom-built computer program for automated reporting of DXA scans using Pydicom, an open-source package built in the Python computer language, and regular expressions to mine DICOM tags for patient information and bone mineral density statistics. This program, easy to emulate by any novice computer programmer, has doubled our efficiency at reporting DXA scans and has eliminated dictation errors.

A video automated system for nuclear data in the ENDF format

International Nuclear Information System (INIS)

Oliveira Silva, O. de; Corcuera, R.P.; Ferreira, P.A.; Moraes Cunha, M. de

1992-01-01

This paper presents a video catalogue for libraries in the ENDF-5 or ENDF-6 format (Evaluated Nuclear Data File) which can be run on an IBM-PC computer. This user friendly catalogue is of interest to nuclear and reactor physics researchers. The input is the filename of ENDF data and the output two files giving: a) the list of materials with corresponding laboratory, author and date of evaluation: b) uncorresponding about the MF and MT numbers for each material. The program is written in the C language whose capability of providing windows and interrupts along with speed and portability, has been greatly exploited. The system allows output of options (a) and (b) either on screen, printer or hard disk. (author)

Identifying and locating surface defects in wood: Part of an automated lumber processing system

Science.gov (United States)

Richard W. Conners; Charles W. McMillin; Kingyao Lin; Ramon E. Vasquez-Espinosa

1983-01-01

Continued increases in the cost of materials and labor make it imperative for furniture manufacturers to control costs by improved yield and increased productivity. This paper describes an Automated Lumber Processing System (ALPS) that employs computer tomography, optical scanning technology, the calculation of an optimum cutting strategy, and 1 computer-driven laser...

A new automated quantification algorithm for the detection and evaluation of focal liver lesions with contrast-enhanced ultrasound.

Science.gov (United States)

Gatos, Ilias; Tsantis, Stavros; Spiliopoulos, Stavros; Skouroliakou, Aikaterini; Theotokas, Ioannis; Zoumpoulis, Pavlos; Hazle, John D; Kagadis, George C

2015-07-01

Detect and classify focal liver lesions (FLLs) from contrast-enhanced ultrasound (CEUS) imaging by means of an automated quantification algorithm. The proposed algorithm employs a sophisticated segmentation method to detect and contour focal lesions from 52 CEUS video sequences (30 benign and 22 malignant). Lesion detection involves wavelet transform zero crossings utilization as an initialization step to the Markov random field model toward the lesion contour extraction. After FLL detection across frames, time intensity curve (TIC) is computed which provides the contrast agents' behavior at all vascular phases with respect to adjacent parenchyma for each patient. From each TIC, eight features were automatically calculated and employed into the support vector machines (SVMs) classification algorithm in the design of the image analysis model. With regard to FLLs detection accuracy, all lesions detected had an average overlap value of 0.89 ± 0.16 with manual segmentations for all CEUS frame-subsets included in the study. Highest classification accuracy from the SVM model was 90.3%, misdiagnosing three benign and two malignant FLLs with sensitivity and specificity values of 93.1% and 86.9%, respectively. The proposed quantification system that employs FLLs detection and classification algorithms may be of value to physicians as a second opinion tool for avoiding unnecessary invasive procedures.

Detection of early behavioral markers of Huntington's disease in R6/2 mice employing an automated social home cage

DEFF Research Database (Denmark)

Rudenko, Olga; Tkach, Vadim; Berezin, Vladimir

2009-01-01

developed behavior screening system, the IntelliCage, allows automated testing of mouse behavior in the home cage employing individual recognition of animals living in social groups. The present study validates the ability of the IntelliCage system to detect behavioral and cognitive dysfunction in R6/2 mice......Huntington's disease (HD) is an autosomal-dominant neurodegenerative disorder, for which no known cure or effective treatment exists. To facilitate the search for new potential treatments of HD, an automated system for analyzing the behavior of transgenic HD mice is urgently needed. A recently...

Photonic measurement of apparent presence of spirit using a computer automated system.

Science.gov (United States)

Schwartz, Gary E

2011-01-01

Research investigating the potential of detecting the purported presence of spirit (POS) has been hampered by the necessity of employing a human being to collect the data. To infer the presence of alleged spirit, it is essential to remove the simultaneous presence of an experimenter (POE), thereby eliminating his or her physical energy as well as accompanying conscious intentions and expectations. The purpose of these two proof of concept experiments was to explore the feasibility of completely automating data collection in the absence of an experimenter to determine if evidence consistent with POS was still obtained. A computer automated system was developed making it possible to collect all data in the absence of an experimenter (thereby achieving complete experimenter blinding). In the evenings, the computer would perform as follows: (1) start the experimental run at random times, (2) conduct 30-minute baseline as well as POS trials involving two different alleged spirits, and (3) record background light in a completely dark chamber with a highly sensitive low-light Princeton Instruments charge-coupled device (CCD) camera system. The CCD camera and light-tight recording chamber were housed in a light-tight room; the computer, large screen monitor, and speakers were housed in a separate control room. The participants were two purported spirits involved in previous research published in this journal, in which a silicon photomultiplier system was used. The primary intervention was the computer selecting and presenting visual and auditory information inviting Spirit 1 or Spirit 2 to enter the chamber in the absence of experimenter presence and awareness. The CCD camera provided 512 × 512 pixel images of 30-minute exposures (reflecting a combination of possible background light plus instrument dark noise). The images were imported into image processing software, and two-dimensional fast fourier transform (FFT) analyses were performed. Visual examinations of the FFT

Driving pleasure and perceptions of the transition from no automation to full self-driving automation

DEFF Research Database (Denmark)

Bjørner, Thomas

2018-01-01

In this article, I offer a sociological user perspective on increased self-driving automation, which has evolved from a long history associated with automobility. This study explores complex, perceived a priori driving pleasures in different scenarios involving self-driving cars. The methods used...... consisted of 32 in-depth interviews with participants who were given eight video examples (two video examples within four different scenarios) to watch. A numerical rating scales formed parts of the interviews. The findings revealed that driving pleasure when using increasingly automated driving...... technologies is very complex and must be seen within various contexts, including, for example, different speeds, road conditions, purposes, driving distances, and numbers of people in the car. Self-driving cars are not just about technology, increased safety, and better traffic flow, but are also dependent...

OLIVE: Speech-Based Video Retrieval

NARCIS (Netherlands)

de Jong, Franciska M.G.; Gauvain, Jean-Luc; den Hartog, Jurgen; den Hartog, Jeremy; Netter, Klaus

1999-01-01

This paper describes the Olive project which aims to support automated indexing of video material by use of human language technologies. Olive is making use of speech recognition to automatically derive transcriptions of the sound tracks, generating time-coded linguistic elements which serve as the

A fascinating country in the world of computing your guide to automated reasoning

CERN Document Server

Wos, Larry

1999-01-01

This book shows you - through examples and puzzles and intriguing questions - how to make your computer reason logically. To help you, the book includes a CD-ROM with OTTER, the world's most powerful general-purpose reasoning program. The automation of reasoning has advanced markedly in the past few decades, and this book discusses some of the remarkable successes that automated reasoning programs have had in tackling challenging problems in mathematics, logic, program verification, and circuit design. Because the intended audience includes students and teachers, the book provides many exercis

Effectiveness of a Video-Versus Text-Based Computer-Tailored Intervention for Obesity Prevention after One Year: A Randomized Controlled Trial

Directory of Open Access Journals (Sweden)

Kei Long Cheung

2017-10-01

Full Text Available Computer-tailored programs may help to prevent overweight and obesity, which are worldwide public health problems. This study investigated (1 the 12-month effectiveness of a video- and text-based computer-tailored intervention on energy intake, physical activity, and body mass index (BMI, and (2 the role of educational level in intervention effects. A randomized controlled trial in The Netherlands was conducted, in which adults were allocated to a video-based condition, text-based condition, or control condition, with baseline, 6 months, and 12 months follow-up. Outcome variables were self-reported BMI, physical activity, and energy intake. Mixed-effects modelling was used to investigate intervention effects and potential interaction effects. Compared to the control group, the video intervention group was effective regarding energy intake after 6 months (least squares means (LSM difference = −205.40, p = 0.00 and 12 months (LSM difference = −128.14, p = 0.03. Only video intervention resulted in lower average daily energy intake after one year (d = 0.12. Educational role and BMI did not seem to interact with this effect. No intervention effects on BMI and physical activity were found. The video computer-tailored intervention was effective on energy intake after one year. This effect was not dependent on educational levels or BMI categories, suggesting that video tailoring can be effective for a broad range of risk groups and may be preferred over text tailoring.

Effectiveness of a Video-Versus Text-Based Computer-Tailored Intervention for Obesity Prevention after One Year: A Randomized Controlled Trial

Science.gov (United States)

Cheung, Kei Long; Schwabe, Inga; Walthouwer, Michel J. L.; Oenema, Anke; de Vries, Hein

2017-01-01

Computer-tailored programs may help to prevent overweight and obesity, which are worldwide public health problems. This study investigated (1) the 12-month effectiveness of a video- and text-based computer-tailored intervention on energy intake, physical activity, and body mass index (BMI), and (2) the role of educational level in intervention effects. A randomized controlled trial in The Netherlands was conducted, in which adults were allocated to a video-based condition, text-based condition, or control condition, with baseline, 6 months, and 12 months follow-up. Outcome variables were self-reported BMI, physical activity, and energy intake. Mixed-effects modelling was used to investigate intervention effects and potential interaction effects. Compared to the control group, the video intervention group was effective regarding energy intake after 6 months (least squares means (LSM) difference = −205.40, p = 0.00) and 12 months (LSM difference = −128.14, p = 0.03). Only video intervention resulted in lower average daily energy intake after one year (d = 0.12). Educational role and BMI did not seem to interact with this effect. No intervention effects on BMI and physical activity were found. The video computer-tailored intervention was effective on energy intake after one year. This effect was not dependent on educational levels or BMI categories, suggesting that video tailoring can be effective for a broad range of risk groups and may be preferred over text tailoring. PMID:29065545

Vision 20/20: Automation and advanced computing in clinical radiation oncology

International Nuclear Information System (INIS)

Moore, Kevin L.; Moiseenko, Vitali; Kagadis, George C.; McNutt, Todd R.; Mutic, Sasa

2014-01-01

This Vision 20/20 paper considers what computational advances are likely to be implemented in clinical radiation oncology in the coming years and how the adoption of these changes might alter the practice of radiotherapy. Four main areas of likely advancement are explored: cloud computing, aggregate data analyses, parallel computation, and automation. As these developments promise both new opportunities and new risks to clinicians and patients alike, the potential benefits are weighed against the hazards associated with each advance, with special considerations regarding patient safety under new computational platforms and methodologies. While the concerns of patient safety are legitimate, the authors contend that progress toward next-generation clinical informatics systems will bring about extremely valuable developments in quality improvement initiatives, clinical efficiency, outcomes analyses, data sharing, and adaptive radiotherapy

Vision 20/20: Automation and advanced computing in clinical radiation oncology

Energy Technology Data Exchange (ETDEWEB)

Moore, Kevin L., E-mail: kevinmoore@ucsd.edu; Moiseenko, Vitali [Department of Radiation Medicine and Applied Sciences, University of California San Diego, La Jolla, California 92093 (United States); Kagadis, George C. [Department of Medical Physics, School of Medicine, University of Patras, Rion, GR 26504 (Greece); McNutt, Todd R. [Department of Radiation Oncology and Molecular Radiation Science, School of Medicine, Johns Hopkins University, Baltimore, Maryland 21231 (United States); Mutic, Sasa [Department of Radiation Oncology, Washington University in St. Louis, St. Louis, Missouri 63110 (United States)

2014-01-15

This Vision 20/20 paper considers what computational advances are likely to be implemented in clinical radiation oncology in the coming years and how the adoption of these changes might alter the practice of radiotherapy. Four main areas of likely advancement are explored: cloud computing, aggregate data analyses, parallel computation, and automation. As these developments promise both new opportunities and new risks to clinicians and patients alike, the potential benefits are weighed against the hazards associated with each advance, with special considerations regarding patient safety under new computational platforms and methodologies. While the concerns of patient safety are legitimate, the authors contend that progress toward next-generation clinical informatics systems will bring about extremely valuable developments in quality improvement initiatives, clinical efficiency, outcomes analyses, data sharing, and adaptive radiotherapy.

Vision 20/20: Automation and advanced computing in clinical radiation oncology.

Science.gov (United States)

Moore, Kevin L; Kagadis, George C; McNutt, Todd R; Moiseenko, Vitali; Mutic, Sasa

2014-01-01

This Vision 20/20 paper considers what computational advances are likely to be implemented in clinical radiation oncology in the coming years and how the adoption of these changes might alter the practice of radiotherapy. Four main areas of likely advancement are explored: cloud computing, aggregate data analyses, parallel computation, and automation. As these developments promise both new opportunities and new risks to clinicians and patients alike, the potential benefits are weighed against the hazards associated with each advance, with special considerations regarding patient safety under new computational platforms and methodologies. While the concerns of patient safety are legitimate, the authors contend that progress toward next-generation clinical informatics systems will bring about extremely valuable developments in quality improvement initiatives, clinical efficiency, outcomes analyses, data sharing, and adaptive radiotherapy.

A Fully Automated High-Throughput Zebrafish Behavioral Ototoxicity Assay.

Science.gov (United States)

Todd, Douglas W; Philip, Rohit C; Niihori, Maki; Ringle, Ryan A; Coyle, Kelsey R; Zehri, Sobia F; Zabala, Leanne; Mudery, Jordan A; Francis, Ross H; Rodriguez, Jeffrey J; Jacob, Abraham

2017-08-01

Zebrafish animal models lend themselves to behavioral assays that can facilitate rapid screening of ototoxic, otoprotective, and otoregenerative drugs. Structurally similar to human inner ear hair cells, the mechanosensory hair cells on their lateral line allow the zebrafish to sense water flow and orient head-to-current in a behavior called rheotaxis. This rheotaxis behavior deteriorates in a dose-dependent manner with increased exposure to the ototoxin cisplatin, thereby establishing itself as an excellent biomarker for anatomic damage to lateral line hair cells. Building on work by our group and others, we have built a new, fully automated high-throughput behavioral assay system that uses automated image analysis techniques to quantify rheotaxis behavior. This novel system consists of a custom-designed swimming apparatus and imaging system consisting of network-controlled Raspberry Pi microcomputers capturing infrared video. Automated analysis techniques detect individual zebrafish, compute their orientation, and quantify the rheotaxis behavior of a zebrafish test population, producing a powerful, high-throughput behavioral assay. Using our fully automated biological assay to test a standardized ototoxic dose of cisplatin against varying doses of compounds that protect or regenerate hair cells may facilitate rapid translation of candidate drugs into preclinical mammalian models of hearing loss.

A CLOUD-BASED ARCHITECTURE FOR SMART VIDEO SURVEILLANCE

Directory of Open Access Journals (Sweden)

L. Valentín

2017-09-01

Full Text Available Turning a city into a smart city has attracted considerable attention. A smart city can be seen as a city that uses digital technology not only to improve the quality of people’s life, but also, to have a positive impact in the environment and, at the same time, offer efficient and easy-to-use services. A fundamental aspect to be considered in a smart city is people’s safety and welfare, therefore, having a good security system becomes a necessity, because it allows us to detect and identify potential risk situations, and then take appropriate decisions to help people or even prevent criminal acts. In this paper we present an architecture for automated video surveillance based on the cloud computing schema capable of acquiring a video stream from a set of cameras connected to the network, process that information, detect, label and highlight security-relevant events automatically, store the information and provide situational awareness in order to minimize response time to take the appropriate action.

Fully automated reconstruction of three-dimensional vascular tree structures from two orthogonal views using computational algorithms and productionrules

Science.gov (United States)

Liu, Iching; Sun, Ying

1992-10-01

A system for reconstructing 3-D vascular structure from two orthogonally projected images is presented. The formidable problem of matching segments between two views is solved using knowledge of the epipolar constraint and the similarity of segment geometry and connectivity. The knowledge is represented in a rule-based system, which also controls the operation of several computational algorithms for tracking segments in each image, representing 2-D segments with directed graphs, and reconstructing 3-D segments from matching 2-D segment pairs. Uncertain reasoning governs the interaction between segmentation and matching; it also provides a framework for resolving the matching ambiguities in an iterative way. The system was implemented in the C language and the C Language Integrated Production System (CLIPS) expert system shell. Using video images of a tree model, the standard deviation of reconstructed centerlines was estimated to be 0.8 mm (1.7 mm) when the view direction was parallel (perpendicular) to the epipolar plane. Feasibility of clinical use was shown using x-ray angiograms of a human chest phantom. The correspondence of vessel segments between two views was accurate. Computational time for the entire reconstruction process was under 30 s on a workstation. A fully automated system for two-view reconstruction that does not require the a priori knowledge of vascular anatomy is demonstrated.

Written and Computer-Mediated Accounting Communication Skills: An Employer Perspective

Science.gov (United States)

Jones, Christopher G.

2011-01-01

Communication skills are a fundamental personal competency for a successful career in accounting. What is not so obvious is the specific written communication skill set employers look for and the extent those skills are computer mediated. Using survey research, this article explores the particular skills employers desire and their satisfaction…

Using the CPU and GPU for real-time video enhancement on a mobile computer

CSIR Research Space (South Africa)

Bachoo, AK

2010-09-01

Full Text Available . In this paper, the current advances in mobile CPU and GPU hardware are used to implement video enhancement algorithms in a new way on a mobile computer. Both the CPU and GPU are used effectively to achieve realtime performance for complex image enhancement...

Mutually Beneficial Foreign Language Learning: Creating Meaningful Interactions through Video-Synchronous Computer-Mediated Communication

Science.gov (United States)

Kato, Fumie; Spring, Ryan; Mori, Chikako

2016-01-01

Providing learners of a foreign language with meaningful opportunities for interactions, specifically with native speakers, is especially challenging for instructors. One way to overcome this obstacle is through video-synchronous computer-mediated communication tools such as Skype software. This study reports quantitative and qualitative data from…

Dynamic resource allocation engine for cloud-based real-time video transcoding in mobile cloud computing environments

Science.gov (United States)

Adedayo, Bada; Wang, Qi; Alcaraz Calero, Jose M.; Grecos, Christos

2015-02-01

The recent explosion in video-related Internet traffic has been driven by the widespread use of smart mobile devices, particularly smartphones with advanced cameras that are able to record high-quality videos. Although many of these devices offer the facility to record videos at different spatial and temporal resolutions, primarily with local storage considerations in mind, most users only ever use the highest quality settings. The vast majority of these devices are optimised for compressing the acquired video using a single built-in codec and have neither the computational resources nor battery reserves to transcode the video to alternative formats. This paper proposes a new low-complexity dynamic resource allocation engine for cloud-based video transcoding services that are both scalable and capable of being delivered in real-time. Firstly, through extensive experimentation, we establish resource requirement benchmarks for a wide range of transcoding tasks. The set of tasks investigated covers the most widely used input formats (encoder type, resolution, amount of motion and frame rate) associated with mobile devices and the most popular output formats derived from a comprehensive set of use cases, e.g. a mobile news reporter directly transmitting videos to the TV audience of various video format requirements, with minimal usage of resources both at the reporter's end and at the cloud infrastructure end for transcoding services.

Automated differentiation of computer models for sensitivity analysis

International Nuclear Information System (INIS)

Worley, B.A.

1990-01-01

Sensitivity analysis of reactor physics computer models is an established discipline after more than twenty years of active development of generalized perturbations theory based on direct and adjoint methods. Many reactor physics models have been enhanced to solve for sensitivities of model results to model data. The calculated sensitivities are usually normalized first derivatives although some codes are capable of solving for higher-order sensitivities. The purpose of this paper is to report on the development and application of the GRESS system for automating the implementation of the direct and adjoint techniques into existing FORTRAN computer codes. The GRESS system was developed at ORNL to eliminate the costly man-power intensive effort required to implement the direct and adjoint techniques into already-existing FORTRAN codes. GRESS has been successfully tested for a number of codes over a wide range of applications and presently operates on VAX machines under both VMS and UNIX operating systems

Automated differentiation of computer models for sensitivity analysis

International Nuclear Information System (INIS)

Worley, B.A.

1991-01-01

Sensitivity analysis of reactor physics computer models is an established discipline after more than twenty years of active development of generalized perturbations theory based on direct and adjoint methods. Many reactor physics models have been enhanced to solve for sensitivities of model results to model data. The calculated sensitivities are usually normalized first derivatives, although some codes are capable of solving for higher-order sensitivities. The purpose of this paper is to report on the development and application of the GRESS system for automating the implementation of the direct and adjoint techniques into existing FORTRAN computer codes. The GRESS system was developed at ORNL to eliminate the costly man-power intensive effort required to implement the direct and adjoint techniques into already-existing FORTRAN codes. GRESS has been successfully tested for a number of codes over a wide range of applications and presently operates on VAX machines under both VMS and UNIX operating systems. (author). 9 refs, 1 tab

Manual versus Automated Rodent Behavioral Assessment: Comparing Efficacy and Ease of Bederson and Garcia Neurological Deficit Scores to an Open Field Video-Tracking System

OpenAIRE

Fiona A. Desland; Aqeela Afzal; Zuha Warraich; J Mocco

2014-01-01

Animal models of stroke have been crucial in advancing our understanding of the pathophysiology of cerebral ischemia. Currently, the standards for determining neurological deficit in rodents are the Bederson and Garcia scales, manual assessments scoring animals based on parameters ranked on a narrow scale of severity. Automated open field analysis of a live-video tracking system that analyzes animal behavior may provide a more sensitive test. Results obtained from the manual Bederson and Garc...

Functions and Requirements and Specifications for Replacement of the Computer Automated Surveillance System (CASS)

International Nuclear Information System (INIS)

SCAIEF, C.C.

1999-01-01

This functions, requirements and specifications document defines the baseline requirements and criteria for the design, purchase, fabrication, construction, installation, and operation of the system to replace the Computer Automated Surveillance System (CASS) alarm monitoring

Securing Embedded Smart Cameras with Trusted Computing

Directory of Open Access Journals (Sweden)

Winkler Thomas

2011-01-01

Full Text Available Camera systems are used in many applications including video surveillance for crime prevention and investigation, traffic monitoring on highways or building monitoring and automation. With the shift from analog towards digital systems, the capabilities of cameras are constantly increasing. Today's smart camera systems come with considerable computing power, large memory, and wired or wireless communication interfaces. With onboard image processing and analysis capabilities, cameras not only open new possibilities but also raise new challenges. Often overlooked are potential security issues of the camera system. The increasing amount of software running on the cameras turns them into attractive targets for attackers. Therefore, the protection of camera devices and delivered data is of critical importance. In this work we present an embedded camera prototype that uses Trusted Computing to provide security guarantees for streamed videos. With a hardware-based security solution, we ensure integrity, authenticity, and confidentiality of videos. Furthermore, we incorporate image timestamping, detection of platform reboots, and reporting of the system status. This work is not limited to theoretical considerations but also describes the implementation of a prototype system. Extensive evaluation results illustrate the practical feasibility of the approach.

Automated Computer Access Request System

Science.gov (United States)

Snook, Bryan E.

2010-01-01

The Automated Computer Access Request (AutoCAR) system is a Web-based account provisioning application that replaces the time-consuming paper-based computer-access request process at Johnson Space Center (JSC). Auto- CAR combines rules-based and role-based functionality in one application to provide a centralized system that is easily and widely accessible. The system features a work-flow engine that facilitates request routing, a user registration directory containing contact information and user metadata, an access request submission and tracking process, and a system administrator account management component. This provides full, end-to-end disposition approval chain accountability from the moment a request is submitted. By blending both rules-based and rolebased functionality, AutoCAR has the flexibility to route requests based on a user s nationality, JSC affiliation status, and other export-control requirements, while ensuring a user s request is addressed by either a primary or backup approver. All user accounts that are tracked in AutoCAR are recorded and mapped to the native operating system schema on the target platform where user accounts reside. This allows for future extensibility for supporting creation, deletion, and account management directly on the target platforms by way of AutoCAR. The system s directory-based lookup and day-today change analysis of directory information determines personnel moves, deletions, and additions, and automatically notifies a user via e-mail to revalidate his/her account access as a result of such changes. AutoCAR is a Microsoft classic active server page (ASP) application hosted on a Microsoft Internet Information Server (IIS).

aMCfast: automation of fast NLO computations for PDF fits

CERN Document Server

Bertone, Valerio; Frixione, Stefano; Rojo, Juan; Sutton, Mark

2014-01-01

We present the interface between MadGraph5_aMC@NLO, a self-contained program that calculates cross sections up to next-to-leading order accuracy in an automated manner, and APPLgrid, a code that parametrises such cross sections in the form of look-up tables which can be used for the fast computations needed in the context of PDF fits. The main characteristic of this interface, which we dub aMCfast, is its being fully automated as well, which removes the need to extract manually the process-specific information for additional physics processes, as is the case with other matrix element calculators, and renders it straightforward to include any new process in the PDF fits. We demonstrate this by studying several cases which are easily measured at the LHC, have a good constraining power on PDFs, and some of which were previously unavailable in the form of a fast interface.

Programming Video Games and Simulations in Science Education: Exploring Computational Thinking through Code Analysis

Science.gov (United States)

Garneli, Varvara; Chorianopoulos, Konstantinos

2018-01-01

Various aspects of computational thinking (CT) could be supported by educational contexts such as simulations and video-games construction. In this field study, potential differences in student motivation and learning were empirically examined through students' code. For this purpose, we performed a teaching intervention that took place over five…

Augmented reality during robot-assisted laparoscopic partial nephrectomy: toward real-time 3D-CT to stereoscopic video registration.

Science.gov (United States)

Su, Li-Ming; Vagvolgyi, Balazs P; Agarwal, Rahul; Reiley, Carol E; Taylor, Russell H; Hager, Gregory D

2009-04-01

To investigate a markerless tracking system for real-time stereo-endoscopic visualization of preoperative computed tomographic imaging as an augmented display during robot-assisted laparoscopic partial nephrectomy. Stereoscopic video segments of a patient undergoing robot-assisted laparoscopic partial nephrectomy for tumor and another for a partial staghorn renal calculus were processed to evaluate the performance of a three-dimensional (3D)-to-3D registration algorithm. After both cases, we registered a segment of the video recording to the corresponding preoperative 3D-computed tomography image. After calibrating the camera and overlay, 3D-to-3D registration was created between the model and the surgical recording using a modified iterative closest point technique. Image-based tracking technology tracked selected fixed points on the kidney surface to augment the image-to-model registration. Our investigation has demonstrated that we can identify and track the kidney surface in real time when applied to intraoperative video recordings and overlay the 3D models of the kidney, tumor (or stone), and collecting system semitransparently. Using a basic computer research platform, we achieved an update rate of 10 Hz and an overlay latency of 4 frames. The accuracy of the 3D registration was 1 mm. Augmented reality overlay of reconstructed 3D-computed tomography images onto real-time stereo video footage is possible using iterative closest point and image-based surface tracking technology that does not use external navigation tracking systems or preplaced surface markers. Additional studies are needed to assess the precision and to achieve fully automated registration and display for intraoperative use.

Video and computer games: effect on children and implications for health education.

Science.gov (United States)

Dorman, S M

1997-04-01

Video and computer-based games have assumed a prominent role in the culture of American children and adolescents. Given the pervasiveness of their influence, it is likely that these games may affect the health and well-being of children. This paper examines the health effects of these games on children, suggests criteria upon which parents and teachers may evaluate the games, and notes some implications for health educators.

Experiences of Using Automated Assessment in Computer Science Courses

Directory of Open Access Journals (Sweden)

John English

2015-10-01

Full Text Available In this paper we discuss the use of automated assessment in a variety of computer science courses that have been taught at Israel Academic College by the authors. The course assignments were assessed entirely automatically using Checkpoint, a web-based automated assessment framework. The assignments all used free-text questions (where the students type in their own answers. Students were allowed to correct errors based on feedback provided by the system and resubmit their answers. A total of 141 students were surveyed to assess their opinions of this approach, and we analysed their responses. Analysis of the questionnaire showed a low correlation between questions, indicating the statistical independence of the individual questions. As a whole, student feedback on using Checkpoint was very positive, emphasizing the benefits of multiple attempts, impartial marking, and a quick turnaround time for submissions. Many students said that Checkpoint gave them confidence in learning and motivation to practise. Students also said that the detailed feedback that Checkpoint generated when their programs failed helped them understand their mistakes and how to correct them.

Despeckle filtering for ultrasound imaging and video II selected applications

CERN Document Server

Loizou, Christos P

2015-01-01

In ultrasound imaging and video visual perception is hindered by speckle multiplicative noise that degrades the quality. Noise reduction is therefore essential for improving the visual observation quality or as a pre-processing step for further automated analysis, such as image/video segmentation, texture analysis and encoding in ultrasound imaging and video. The goal of the first book (book 1 of 2 books) was to introduce the problem of speckle in ultrasound image and video as well as the theoretical background, algorithmic steps, and the MatlabTM for the following group of despeckle filters:

Dynamic video encryption algorithm for H.264/AVC based on a spatiotemporal chaos system.

Science.gov (United States)

Xu, Hui; Tong, Xiao-Jun; Zhang, Miao; Wang, Zhu; Li, Ling-Hao

2016-06-01

Video encryption schemes mostly employ the selective encryption method to encrypt parts of important and sensitive video information, aiming to ensure the real-time performance and encryption efficiency. The classic block cipher is not applicable to video encryption due to the high computational overhead. In this paper, we propose the encryption selection control module to encrypt video syntax elements dynamically which is controlled by the chaotic pseudorandom sequence. A novel spatiotemporal chaos system and binarization method is used to generate a key stream for encrypting the chosen syntax elements. The proposed scheme enhances the resistance against attacks through the dynamic encryption process and high-security stream cipher. Experimental results show that the proposed method exhibits high security and high efficiency with little effect on the compression ratio and time cost.

Operating procedure automation to enhance safety of nuclear power plants

International Nuclear Information System (INIS)

Husseiny, A.A.; Sabri, Z.A.; Adams, S.K.; Rodriguez, R.J.; Packer, D.; Holmes, J.W.

1989-01-01

Use of logic statements and computer assist are explored as means for automation and improvement on design of operating procedures including those employed in abnormal and emergency situations. Operating procedures for downpower and loss of forced circulation are used for demonstration. Human-factors analysis is performed on generic emergency operating procedures for three strategies of control; manual, semi-automatic and automatic, using standard emergency operating procedures. Such preliminary analysis shows that automation of procedures is feasible provided that fault-tolerant software and hardware become available for design of the controllers. Recommendations are provided for tests to substantiate the promise of enhancement of plant safety. Adequate design of operating procedures through automation may alleviate several major operational problems of nuclear power plants. Also, automation of procedures is necessary for partial or overall automatic control of plants. Fully automatic operations are needed for space applications while supervised automation of land-based and offshore plants may become the thrust of new generation of nulcear power plants. (orig.)

Tech Writing, Meet "Tomb Raider": Video and Computer Games in the Technical Communication Classroom

Science.gov (United States)

Vie, Stephanie

2008-01-01

This article examines the common genre of the usability study in technical communication courses and proposes the incorporation of computer and video games to ensure a rhetorical focus to this genre. As games are both entertaining and educational, their use in the technical communication classroom provides a new perspective on multimodal…

Community College Uses a Video-Game Lab to Lure Students to Computer Courses

Science.gov (United States)

Young, Jeffrey R.

2007-01-01

A computer lab has become one of the most popular hangouts at Northern Virginia Community College after officials decided to load its PCs with popular video games, install a PlayStation and an Xbox, and declare it "for gamers only." The goal of this lab is to entice students to take game-design and other IT courses. John Min, dean of…

Background estimation and player detection in badminton video clips using histogram of pixel values along temporal dimension

Science.gov (United States)

Peng, Yahui; Ma, Xiao; Gao, Xinyu; Zhou, Fangxu

2015-12-01

Computer vision is an important tool for sports video processing. However, its application in badminton match analysis is very limited. In this study, we proposed a straightforward but robust histogram-based background estimation and player detection methods for badminton video clips, and compared the results with the naive averaging method and the mixture of Gaussians methods, respectively. The proposed method yielded better background estimation results than the naive averaging method and more accurate player detection results than the mixture of Gaussians player detection method. The preliminary results indicated that the proposed histogram-based method could estimate the background and extract the players accurately. We conclude that the proposed method can be used for badminton player tracking and further studies are warranted for automated match analysis.

Automated Development of Accurate Algorithms and Efficient Codes for Computational Aeroacoustics

Science.gov (United States)

Goodrich, John W.; Dyson, Rodger W.

1999-01-01

The simulation of sound generation and propagation in three space dimensions with realistic aircraft components is a very large time dependent computation with fine details. Simulations in open domains with embedded objects require accurate and robust algorithms for propagation, for artificial inflow and outflow boundaries, and for the definition of geometrically complex objects. The development, implementation, and validation of methods for solving these demanding problems is being done to support the NASA pillar goals for reducing aircraft noise levels. Our goal is to provide algorithms which are sufficiently accurate and efficient to produce usable results rapidly enough to allow design engineers to study the effects on sound levels of design changes in propulsion systems, and in the integration of propulsion systems with airframes. There is a lack of design tools for these purposes at this time. Our technical approach to this problem combines the development of new, algorithms with the use of Mathematica and Unix utilities to automate the algorithm development, code implementation, and validation. We use explicit methods to ensure effective implementation by domain decomposition for SPMD parallel computing. There are several orders of magnitude difference in the computational efficiencies of the algorithms which we have considered. We currently have new artificial inflow and outflow boundary conditions that are stable, accurate, and unobtrusive, with implementations that match the accuracy and efficiency of the propagation methods. The artificial numerical boundary treatments have been proven to have solutions which converge to the full open domain problems, so that the error from the boundary treatments can be driven as low as is required. The purpose of this paper is to briefly present a method for developing highly accurate algorithms for computational aeroacoustics, the use of computer automation in this process, and a brief survey of the algorithms that

Semi-automated reviewing station for IAEA optical surveillance data

International Nuclear Information System (INIS)

Darnell, R.A.; Sonnier, C.S.

1987-01-01

A study is underway on the use of computer vision technology to assist in visual inspection of optical surveillance data. The IAEA currently uses optical surveillance as one of its principle Containment and Surveillance (C/S) measures. The review process is a very time-consuming and tedious task, due to the large amount of optical surveillance data to be reviewed. For some time, the IAEA has identified as one of its principle needs an automated optical surveillance data reviewing station that assists the reviewer in identifying activities of safeguards interest, such as the movement of a very large spent fuel cask. The present development reviewing station consists of commercially available digital image processing hardware controlled by a personal computer. The areas under study include change detection, target discrimination, tracking, and classification. Several algorithms are being evaluated in each of these areas using recorded video tape of safeguards relevant scenes. The computer vision techniques and current status of the studies are discussed

75 FR 29774 - Office of Child Support Enforcement; Privacy Act of 1974; Computer Matching Agreement

Science.gov (United States)

2010-05-27

... of Federal Systems, Office of Automation and Program Operations, Office of Child Support Enforcement... INFORMATION CONTACT: Linda Deimeke, Director, Division of Federal Systems, Office of Automation and Program..., home addresses, and employment information. E. Inclusive Dates of the Matching Program The computer...

Detection of illegal transfer of videos over the Internet

Science.gov (United States)

Chaisorn, Lekha; Sainui, Janya; Manders, Corey

2010-07-01

In this paper, a method for detecting infringements or modifications of a video in real-time is proposed. The method first segments a video stream into shots, after which it extracts some reference frames as keyframes. This process is performed employing a Singular Value Decomposition (SVD) technique developed in this work. Next, for each input video (represented by its keyframes), ordinal-based signature and SIFT (Scale Invariant Feature Transform) descriptors are generated. The ordinal-based method employs a two-level bitmap indexing scheme to construct the index for each video signature. The first level clusters all input keyframes into k clusters while the second level converts the ordinal-based signatures into bitmap vectors. On the other hand, the SIFT-based method directly uses the descriptors as the index. Given a suspect video (being streamed or transferred on the Internet), we generate the signature (ordinal and SIFT descriptors) then we compute similarity between its signature and those signatures in the database based on ordinal signature and SIFT descriptors separately. For similarity measure, besides the Euclidean distance, Boolean operators are also utilized during the matching process. We have tested our system by performing several experiments on 50 videos (each about 1/2 hour in duration) obtained from the TRECVID 2006 data set. For experiments set up, we refer to the conditions provided by TRECVID 2009 on "Content-based copy detection" task. In addition, we also refer to the requirements issued in the call for proposals by MPEG standard on the similar task. Initial result shows that our framework is effective and robust. As compared to our previous work, on top of the achievement we obtained by reducing the storage space and time taken in the ordinal based method, by introducing the SIFT features, we could achieve an overall accuracy in F1 measure of about 96% (improved about 8%).

Integrating the Allen Brain Institute Cell Types Database into Automated Neuroscience Workflow.

Science.gov (United States)

Stockton, David B; Santamaria, Fidel

2017-10-01

We developed software tools to download, extract features, and organize the Cell Types Database from the Allen Brain Institute (ABI) in order to integrate its whole cell patch clamp characterization data into the automated modeling/data analysis cycle. To expand the potential user base we employed both Python and MATLAB. The basic set of tools downloads selected raw data and extracts cell, sweep, and spike features, using ABI's feature extraction code. To facilitate data manipulation we added a tool to build a local specialized database of raw data plus extracted features. Finally, to maximize automation, we extended our NeuroManager workflow automation suite to include these tools plus a separate investigation database. The extended suite allows the user to integrate ABI experimental and modeling data into an automated workflow deployed on heterogeneous computer infrastructures, from local servers, to high performance computing environments, to the cloud. Since our approach is focused on workflow procedures our tools can be modified to interact with the increasing number of neuroscience databases being developed to cover all scales and properties of the nervous system.

Face Recognition and Tracking in Videos

Directory of Open Access Journals (Sweden)

Swapnil Vitthal Tathe

2017-07-01

Full Text Available Advancement in computer vision technology and availability of video capturing devices such as surveillance cameras has evoked new video processing applications. The research in video face recognition is mostly biased towards law enforcement applications. Applications involves human recognition based on face and iris, human computer interaction, behavior analysis, video surveillance etc. This paper presents face tracking framework that is capable of face detection using Haar features, recognition using Gabor feature extraction, matching using correlation score and tracking using Kalman filter. The method has good recognition rate for real-life videos and robust performance to changes due to illumination, environmental factors, scale, pose and orientations.

Real-time video streaming in mobile cloud over heterogeneous wireless networks

Science.gov (United States)

Abdallah-Saleh, Saleh; Wang, Qi; Grecos, Christos

2012-06-01

Recently, the concept of Mobile Cloud Computing (MCC) has been proposed to offload the resource requirements in computational capabilities, storage and security from mobile devices into the cloud. Internet video applications such as real-time streaming are expected to be ubiquitously deployed and supported over the cloud for mobile users, who typically encounter a range of wireless networks of diverse radio access technologies during their roaming. However, real-time video streaming for mobile cloud users across heterogeneous wireless networks presents multiple challenges. The network-layer quality of service (QoS) provision to support high-quality mobile video delivery in this demanding scenario remains an open research question, and this in turn affects the application-level visual quality and impedes mobile users' perceived quality of experience (QoE). In this paper, we devise a framework to support real-time video streaming in this new mobile video networking paradigm and evaluate the performance of the proposed framework empirically through a lab-based yet realistic testing platform. One particular issue we focus on is the effect of users' mobility on the QoS of video streaming over the cloud. We design and implement a hybrid platform comprising of a test-bed and an emulator, on which our concept of mobile cloud computing, video streaming and heterogeneous wireless networks are implemented and integrated to allow the testing of our framework. As representative heterogeneous wireless networks, the popular WLAN (Wi-Fi) and MAN (WiMAX) networks are incorporated in order to evaluate effects of handovers between these different radio access technologies. The H.264/AVC (Advanced Video Coding) standard is employed for real-time video streaming from a server to mobile users (client nodes) in the networks. Mobility support is introduced to enable continuous streaming experience for a mobile user across the heterogeneous wireless network. Real-time video stream packets

Automated model building

CERN Document Server

Caferra, Ricardo; Peltier, Nicholas

2004-01-01

This is the first book on automated model building, a discipline of automated deduction that is of growing importance Although models and their construction are important per se, automated model building has appeared as a natural enrichment of automated deduction, especially in the attempt to capture the human way of reasoning The book provides an historical overview of the field of automated deduction, and presents the foundations of different existing approaches to model construction, in particular those developed by the authors Finite and infinite model building techniques are presented The main emphasis is on calculi-based methods, and relevant practical results are provided The book is of interest to researchers and graduate students in computer science, computational logic and artificial intelligence It can also be used as a textbook in advanced undergraduate courses

Computer-automated tuning of semiconductor double quantum dots into the single-electron regime

NARCIS (Netherlands)

Baart, T.A.; Eendebak, P.T.; Reichl, C.; Wegscheider, W.; Vandersypen, L.M.K.

2016-01-01

We report the computer-automated tuning of gate-defined semiconductor double quantum dots in GaAs heterostructures. We benchmark the algorithm by creating three double quantum dots inside a linear array of four quantum dots. The algorithm sets the correct gate voltages for all the gates to tune the

High-reliability computing for the smarter planet

International Nuclear Information System (INIS)

Quinn, Heather M.; Graham, Paul; Manuzzato, Andrea; Dehon, Andre

2010-01-01

The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is necessary

High-reliability computing for the smarter planet

Energy Technology Data Exchange (ETDEWEB)

Quinn, Heather M [Los Alamos National Laboratory; Graham, Paul [Los Alamos National Laboratory; Manuzzato, Andrea [UNIV OF PADOVA; Dehon, Andre [UNIV OF PENN; Carter, Nicholas [INTEL CORPORATION

2010-01-01

The geometric rate of improvement of transistor size and integrated circuit performance, known as Moore's Law, has been an engine of growth for our economy, enabling new products and services, creating new value and wealth, increasing safety, and removing menial tasks from our daily lives. Affordable, highly integrated components have enabled both life-saving technologies and rich entertainment applications. Anti-lock brakes, insulin monitors, and GPS-enabled emergency response systems save lives. Cell phones, internet appliances, virtual worlds, realistic video games, and mp3 players enrich our lives and connect us together. Over the past 40 years of silicon scaling, the increasing capabilities of inexpensive computation have transformed our society through automation and ubiquitous communications. In this paper, we will present the concept of the smarter planet, how reliability failures affect current systems, and methods that can be used to increase the reliable adoption of new automation in the future. We will illustrate these issues using a number of different electronic devices in a couple of different scenarios. Recently IBM has been presenting the idea of a 'smarter planet.' In smarter planet documents, IBM discusses increased computer automation of roadways, banking, healthcare, and infrastructure, as automation could create more efficient systems. A necessary component of the smarter planet concept is to ensure that these new systems have very high reliability. Even extremely rare reliability problems can easily escalate to problematic scenarios when implemented at very large scales. For life-critical systems, such as automobiles, infrastructure, medical implantables, and avionic systems, unmitigated failures could be dangerous. As more automation moves into these types of critical systems, reliability failures will need to be managed. As computer automation continues to increase in our society, the need for greater radiation reliability is

Medical students' perceptions of video-linked lectures and video-streaming

Directory of Open Access Journals (Sweden)

Karen Mattick

2010-12-01

Full Text Available Video-linked lectures allow healthcare students across multiple sites, and between university and hospital bases, to come together for the purposes of shared teaching. Recording and streaming video-linked lectures allows students to view them at a later date and provides an additional resource to support student learning. As part of a UK Higher Education Academy-funded Pathfinder project, this study explored medical students' perceptions of video-linked lectures and video-streaming, and their impact on learning. The methodology involved semi-structured interviews with 20 undergraduate medical students across four sites and five year groups. Several key themes emerged from the analysis. Students generally preferred live lectures at the home site and saw interaction between sites as a major challenge. Students reported that their attendance at live lectures was not affected by the availability of streamed lectures and tended to be influenced more by the topic and speaker than the technical arrangements. These findings will inform other educators interested in employing similar video technologies in their teaching.Keywords: video-linked lecture; video-streaming; student perceptions; decisionmaking; cross-campus teaching.

HITCal: a software tool for analysis of video head impulse test responses.

Science.gov (United States)

Rey-Martinez, Jorge; Batuecas-Caletrio, Angel; Matiño, Eusebi; Perez Fernandez, Nicolás

2015-09-01

The developed software (HITCal) may be a useful tool in the analysis and measurement of the saccadic video head impulse test (vHIT) responses and with the experience obtained during its use the authors suggest that HITCal is an excellent method for enhanced exploration of vHIT outputs. To develop a (software) method to analyze and explore the vHIT responses, mainly saccades. HITCal was written using a computational development program; the function to access a vHIT file was programmed; extended head impulse exploration and measurement tools were created and an automated saccade analysis was developed using an experimental algorithm. For pre-release HITCal laboratory tests, a database of head impulse tests (HITs) was created with the data collected retrospectively in three reference centers. This HITs database was evaluated by humans and was also computed with HITCal. The authors have successfully built HITCal and it has been released as open source software; the developed software was fully operative and all the proposed characteristics were incorporated in the released version. The automated saccades algorithm implemented in HITCal has good concordance with the assessment by human observers (Cohen's kappa coefficient = 0.7).

A computational framework for automation of point defect calculations

International Nuclear Information System (INIS)

Goyal, Anuj; Gorai, Prashun; Peng, Haowei

2017-01-01

We have developed a complete and rigorously validated open-source Python framework to automate point defect calculations using density functional theory. Furthermore, the framework provides an effective and efficient method for defect structure generation, and creation of simple yet customizable workflows to analyze defect calculations. This package provides the capability to compute widely-accepted correction schemes to overcome finite-size effects, including (1) potential alignment, (2) image-charge correction, and (3) band filling correction to shallow defects. Using Si, ZnO and In2O3 as test examples, we demonstrate the package capabilities and validate the methodology.

An automated Y-maze based on a reduced instruction set computer (RISC) microcontroller for the assessment of continuous spontaneous alternation in rats.

Science.gov (United States)

Heredia-López, Francisco J; Álvarez-Cervera, Fernando J; Collí-Alfaro, José G; Bata-García, José L; Arankowsky-Sandoval, Gloria; Góngora-Alfaro, José L

2016-12-01

Continuous spontaneous alternation behavior (SAB) in a Y-maze is used for evaluating working memory in rodents. Here, the design of an automated Y-maze equipped with three infrared optocouplers per arm, and commanded by a reduced instruction set computer (RISC) microcontroller is described. The software was devised for recording only true entries and exits to the arms. Experimental settings are programmed via a keyboard with three buttons and a display. The sequence of arm entries and the time spent in each arm and the neutral zone (NZ) are saved as a text file in a non-volatile memory for later transfer to a USB flash memory. Data files are analyzed with a program developed under LabVIEW® environment, and the results are exported to an Excel® spreadsheet file. Variables measured are: latency to exit the starting arm, sequence and number of arm entries, number of alternations, alternation percentage, and cumulative times spent in each arm and NZ. The automated Y-maze accurately detected the SAB decrease produced in rats by the muscarinic antagonist trihexyphenidyl, and its reversal by caffeine, having 100 % concordance with the alternation percentages calculated by two trained observers who independently watched videos of the same experiments. Although the values of time spent in the arms and NZ measured by the automated system had small discrepancies with those calculated by the observers, Bland-Altman analysis showed 95 % concordance in three pairs of comparisons, while in one it was 90 %, indicating that this system is a reliable and inexpensive alternative for the study of continuous SAB in rodents.

Emotion-induced engagement in internet video ads

NARCIS (Netherlands)

Texeira, T.; Wedel, M.; Pieters, R.

2012-01-01

This study shows how advertisers can leverage emotion and attention to engage consumers in watching Internet video advertisements. In a controlled experiment, the authors assessed joy and surprise through automated facial expression detection for a sample of advertisements. They assessed

Real-time billboard trademark detection and recognition in sports video

Science.gov (United States)

Bu, Jiang; Lao, Song-Yan; Bai, Liang

2013-03-01

Nowadays, different applications like automatic video indexing, keyword based video search and TV commercials can be developed by detecting and recognizing the billboard trademark. We propose a hierarchical solution for real-time billboard trademark recognition in various sports video, billboard frames are detected in the first level, fuzzy decision tree with easily-computing features are employed to accelerate the process, while in the second level, color and regional SIFT features are combined for the first time to describe the appearance of trademarks, and the shared nearest neighbor (SNN) clustering with x2 distance is utilized instead of traditional K-means clustering to construct the SIFT vocabulary, at last, Latent Semantic Analysis (LSA) based SIFT vocabulary matching is performed on the template trademark and the candidate regions in billboard frame. The preliminary experiments demonstrate the effectiveness of the hierarchical solution, and real time constraints are also met by our solution.

Robust Adaptable Video Copy Detection

DEFF Research Database (Denmark)

Assent, Ira; Kremer, Hardy

2009-01-01

in contrast). Our query processing combines filtering and indexing structures for efficient multistep computation of video copies under this model. We show that our model successfully identifies altered video copies and does so more reliably than existing models.......Video copy detection should be capable of identifying video copies subject to alterations e.g. in video contrast or frame rates. We propose a video copy detection scheme that allows for adaptable detection of videos that are altered temporally (e.g. frame rate change) and/or visually (e.g. change...

Intelligent video surveillance systems

CERN Document Server

Dufour, Jean-Yves

2012-01-01

Belonging to the wider academic field of computer vision, video analytics has aroused a phenomenal surge of interest since the current millennium. Video analytics is intended to solve the problem of the incapability of exploiting video streams in real time for the purpose of detection or anticipation. It involves analyzing the videos using algorithms that detect and track objects of interest over time and that indicate the presence of events or suspect behavior involving these objects.The aims of this book are to highlight the operational attempts of video analytics, to identify possi

Automatic Traffic Data Collection under Varying Lighting and Temperature Conditions in Multimodal Environments: Thermal versus Visible Spectrum Video-Based Systems

Directory of Open Access Journals (Sweden)

Ting Fu

2017-01-01

Full Text Available Vision-based monitoring systems using visible spectrum (regular video cameras can complement or substitute conventional sensors and provide rich positional and classification data. Although new camera technologies, including thermal video sensors, may improve the performance of digital video-based sensors, their performance under various conditions has rarely been evaluated at multimodal facilities. The purpose of this research is to integrate existing computer vision methods for automated data collection and evaluate the detection, classification, and speed measurement performance of thermal video sensors under varying lighting and temperature conditions. Thermal and regular video data was collected simultaneously under different conditions across multiple sites. Although the regular video sensor narrowly outperformed the thermal sensor during daytime, the performance of the thermal sensor is significantly better for low visibility and shadow conditions, particularly for pedestrians and cyclists. Retraining the algorithm on thermal data yielded an improvement in the global accuracy of 48%. Thermal speed measurements were consistently more accurate than for the regular video at daytime and nighttime. Thermal video is insensitive to lighting interference and pavement temperature, solves issues associated with visible light cameras for traffic data collection, and offers other benefits such as privacy, insensitivity to glare, storage space, and lower processing requirements.

Computational needs survey of NASA automation and robotics missions. Volume 1: Survey and results

Science.gov (United States)

Davis, Gloria J.

1991-01-01

NASA's operational use of advanced processor technology in space systems lags behind its commercial development by more than eight years. One of the factors contributing to this is that mission computing requirements are frequently unknown, unstated, misrepresented, or simply not available in a timely manner. NASA must provide clear common requirements to make better use of available technology, to cut development lead time on deployable architectures, and to increase the utilization of new technology. A preliminary set of advanced mission computational processing requirements of automation and robotics (A&R) systems are provided for use by NASA, industry, and academic communities. These results were obtained in an assessment of the computational needs of current projects throughout NASA. The high percent of responses indicated a general need for enhanced computational capabilities beyond the currently available 80386 and 68020 processor technology. Because of the need for faster processors and more memory, 90 percent of the polled automation projects have reduced or will reduce the scope of their implementation capabilities. The requirements are presented with respect to their targeted environment, identifying the applications required, system performance levels necessary to support them, and the degree to which they are met with typical programmatic constraints. Volume one includes the survey and results. Volume two contains the appendixes.

26 CFR 1.1402(a)-3 - Special rules for computing net earnings from self-employment.

Science.gov (United States)

2010-04-01

... self-employment. 1.1402(a)-3 Section 1.1402(a)-3 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Tax on Self-Employment Income § 1.1402(a)-3 Special rules for computing net earnings from self-employment. For the purpose of computing...

Automated digital magnetofluidics

Energy Technology Data Exchange (ETDEWEB)

Schneider, J; Garcia, A A; Marquez, M [Harrington Department of Bioengineering Arizona State University, Tempe AZ 85287-9709 (United States)], E-mail: tony.garcia@asu.edu

2008-08-15

Drops can be moved in complex patterns on superhydrophobic surfaces using a reconfigured computer-controlled x-y metrology stage with a high degree of accuracy, flexibility, and reconfigurability. The stage employs a DMC-4030 controller which has a RISC-based, clock multiplying processor with DSP functions, accepting encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands at rates as fast as 40 milliseconds. A 6.35 mm diameter cylindrical NdFeB magnet is translated by the stage causing water drops to move by the action of induced magnetization of coated iron microspheres that remain in the drop and are attracted to the rare earth magnet through digital magnetofluidics. Water drops are easily moved in complex patterns in automated digital magnetofluidics at an average speed of 2.8 cm/s over a superhydrophobic polyethylene surface created by solvent casting. With additional components, some potential uses for this automated microfluidic system include characterization of superhydrophobic surfaces, water quality analysis, and medical diagnostics.

Automated digital magnetofluidics

Science.gov (United States)

Schneider, J.; Garcia, A. A.; Marquez, M.

2008-08-01

Drops can be moved in complex patterns on superhydrophobic surfaces using a reconfigured computer-controlled x-y metrology stage with a high degree of accuracy, flexibility, and reconfigurability. The stage employs a DMC-4030 controller which has a RISC-based, clock multiplying processor with DSP functions, accepting encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands at rates as fast as 40 milliseconds. A 6.35 mm diameter cylindrical NdFeB magnet is translated by the stage causing water drops to move by the action of induced magnetization of coated iron microspheres that remain in the drop and are attracted to the rare earth magnet through digital magnetofluidics. Water drops are easily moved in complex patterns in automated digital magnetofluidics at an average speed of 2.8 cm/s over a superhydrophobic polyethylene surface created by solvent casting. With additional components, some potential uses for this automated microfluidic system include characterization of superhydrophobic surfaces, water quality analysis, and medical diagnostics.

Robust Watermarking of Video Streams

Directory of Open Access Journals (Sweden)

T. Polyák

2006-01-01

Full Text Available In the past few years there has been an explosion in the use of digital video data. Many people have personal computers at home, and with the help of the Internet users can easily share video files on their computer. This makes possible the unauthorized use of digital media, and without adequate protection systems the authors and distributors have no means to prevent it.Digital watermarking techniques can help these systems to be more effective by embedding secret data right into the video stream. This makes minor changes in the frames of the video, but these changes are almost imperceptible to the human visual system. The embedded information can involve copyright data, access control etc. A robust watermark is resistant to various distortions of the video, so it cannot be removed without affecting the quality of the host medium. In this paper I propose a video watermarking scheme that fulfills the requirements of a robust watermark. 

Automated breast segmentation in ultrasound computer tomography SAFT images

Science.gov (United States)

Hopp, T.; You, W.; Zapf, M.; Tan, W. Y.; Gemmeke, H.; Ruiter, N. V.

2017-03-01

Ultrasound Computer Tomography (USCT) is a promising new imaging system for breast cancer diagnosis. An essential step before further processing is to remove the water background from the reconstructed images. In this paper we present a fully-automated image segmentation method based on three-dimensional active contours. The active contour method is extended by applying gradient vector flow and encoding the USCT aperture characteristics as additional weighting terms. A surface detection algorithm based on a ray model is developed to initialize the active contour, which is iteratively deformed to capture the breast outline in USCT reflection images. The evaluation with synthetic data showed that the method is able to cope with noisy images, and is not influenced by the position of the breast and the presence of scattering objects within the breast. The proposed method was applied to 14 in-vivo images resulting in an average surface deviation from a manual segmentation of 2.7 mm. We conclude that automated segmentation of USCT reflection images is feasible and produces results comparable to a manual segmentation. By applying the proposed method, reproducible segmentation results can be obtained without manual interaction by an expert.

Video Games, Gender, Diversity, and Learning as Cultural Practice: Implications for Equitable Learning and Computing Participation through Games

Science.gov (United States)

Richard, Gabriela T.

2017-01-01

Games, play, and learning have a long and embedded history that outdates digital games by many years. However, video games, computing, and technology have significant and historically documented diversity issues, which privilege whites and males as content producers, computing and gaming experts, and STEM learners and employees. Many aspects of…

Optically intraconnected computer employing dynamically reconfigurable holographic optical element

Science.gov (United States)

Bergman, Larry A. (Inventor)

1992-01-01

An optically intraconnected computer and a reconfigurable holographic optical element employed therein. The basic computer comprises a memory for holding a sequence of instructions to be executed; logic for accessing the instructions in sequence; logic for determining for each the instruction the function to be performed and the effective address thereof; a plurality of individual elements on a common support substrate optimized to perform certain logical sequences employed in executing the instructions; and, element selection logic connected to the logic determining the function to be performed for each the instruction for determining the class of each function and for causing the instruction to be executed by those the elements which perform those associated the logical sequences affecting the instruction execution in an optimum manner. In the optically intraconnected version, the element selection logic is adapted for transmitting and switching signals to the elements optically.

Detection of Visual Events in Underwater Video Using a Neuromorphic Saliency-based Attention System

Science.gov (United States)

Edgington, D. R.; Walther, D.; Cline, D. E.; Sherlock, R.; Salamy, K. A.; Wilson, A.; Koch, C.

2003-12-01

The Monterey Bay Aquarium Research Institute (MBARI) uses high-resolution video equipment on remotely operated vehicles (ROV) to obtain quantitative data on the distribution and abundance of oceanic animals. High-quality video data supplants the traditional approach of assessing the kinds and numbers of animals in the oceanic water column through towing collection nets behind ships. Tow nets are limited in spatial resolution, and often destroy abundant gelatinous animals resulting in species undersampling. Video camera-based quantitative video transects (QVT) are taken through the ocean midwater, from 50m to 4000m, and provide high-resolution data at the scale of the individual animals and their natural aggregation patterns. However, the current manual method of analyzing QVT video by trained scientists is labor intensive and poses a serious limitation to the amount of information that can be analyzed from ROV dives. Presented here is an automated system for detecting marine animals (events) visible in the videos. Automated detection is difficult due to the low contrast of many translucent animals and due to debris ("marine snow") cluttering the scene. Video frames are processed with an artificial intelligence attention selection algorithm that has proven a robust means of target detection in a variety of natural terrestrial scenes. The candidate locations identified by the attention selection module are tracked across video frames using linear Kalman filters. Typically, the occurrence of visible animals in the video footage is sparse in space and time. A notion of "boring" video frames is developed by detecting whether or not there is an interesting candidate object for an animal present in a particular sequence of underwater video -- video frames that do not contain any "interesting" events. If objects can be tracked successfully over several frames, they are stored as potentially "interesting" events. Based on low-level properties, interesting events are

A computational framework for the automated construction of glycosylation reaction networks.

Science.gov (United States)

Liu, Gang; Neelamegham, Sriram

2014-01-01

Glycosylation is among the most common and complex post-translational modifications identified to date. It proceeds through the catalytic action of multiple enzyme families that include the glycosyltransferases that add monosaccharides to growing glycans, and glycosidases which remove sugar residues to trim glycans. The expression level and specificity of these enzymes, in part, regulate the glycan distribution or glycome of specific cell/tissue systems. Currently, there is no systematic method to describe the enzymes and cellular reaction networks that catalyze glycosylation. To address this limitation, we present a streamlined machine-readable definition for the glycosylating enzymes and additional methodologies to construct and analyze glycosylation reaction networks. In this computational framework, the enzyme class is systematically designed to store detailed specificity data such as enzymatic functional group, linkage and substrate specificity. The new classes and their associated functions enable both single-reaction inference and automated full network reconstruction, when given a list of reactants and/or products along with the enzymes present in the system. In addition, graph theory is used to support functions that map the connectivity between two or more species in a network, and that generate subset models to identify rate-limiting steps regulating glycan biosynthesis. Finally, this framework allows the synthesis of biochemical reaction networks using mass spectrometry (MS) data. The features described above are illustrated using three case studies that examine: i) O-linked glycan biosynthesis during the construction of functional selectin-ligands; ii) automated N-linked glycosylation pathway construction; and iii) the handling and analysis of glycomics based MS data. Overall, the new computational framework enables automated glycosylation network model construction and analysis by integrating knowledge of glycan structure and enzyme biochemistry. All

A computational framework for the automated construction of glycosylation reaction networks.

Directory of Open Access Journals (Sweden)

Gang Liu

Full Text Available Glycosylation is among the most common and complex post-translational modifications identified to date. It proceeds through the catalytic action of multiple enzyme families that include the glycosyltransferases that add monosaccharides to growing glycans, and glycosidases which remove sugar residues to trim glycans. The expression level and specificity of these enzymes, in part, regulate the glycan distribution or glycome of specific cell/tissue systems. Currently, there is no systematic method to describe the enzymes and cellular reaction networks that catalyze glycosylation. To address this limitation, we present a streamlined machine-readable definition for the glycosylating enzymes and additional methodologies to construct and analyze glycosylation reaction networks. In this computational framework, the enzyme class is systematically designed to store detailed specificity data such as enzymatic functional group, linkage and substrate specificity. The new classes and their associated functions enable both single-reaction inference and automated full network reconstruction, when given a list of reactants and/or products along with the enzymes present in the system. In addition, graph theory is used to support functions that map the connectivity between two or more species in a network, and that generate subset models to identify rate-limiting steps regulating glycan biosynthesis. Finally, this framework allows the synthesis of biochemical reaction networks using mass spectrometry (MS data. The features described above are illustrated using three case studies that examine: i O-linked glycan biosynthesis during the construction of functional selectin-ligands; ii automated N-linked glycosylation pathway construction; and iii the handling and analysis of glycomics based MS data. Overall, the new computational framework enables automated glycosylation network model construction and analysis by integrating knowledge of glycan structure and enzyme

Automated analysis of short responses in an interactive synthetic tutoring system for introductory physics

Science.gov (United States)

Nakamura, Christopher M.; Murphy, Sytil K.; Christel, Michael G.; Stevens, Scott M.; Zollman, Dean A.

2016-06-01

Computer-automated assessment of students' text responses to short-answer questions represents an important enabling technology for online learning environments. We have investigated the use of machine learning to train computer models capable of automatically classifying short-answer responses and assessed the results. Our investigations are part of a project to develop and test an interactive learning environment designed to help students learn introductory physics concepts. The system is designed around an interactive video tutoring interface. We have analyzed 9 with about 150 responses or less. We observe for 4 of the 9 automated assessment with interrater agreement of 70% or better with the human rater. This level of agreement may represent a baseline for practical utility in instruction and indicates that the method warrants further investigation for use in this type of application. Our results also suggest strategies that may be useful for writing activities and questions that are more appropriate for automated assessment. These strategies include building activities that have relatively few conceptually distinct ways of perceiving the physical behavior of relatively few physical objects. Further success in this direction may allow us to promote interactivity and better provide feedback in online learning systems. These capabilities could enable our system to function more like a real tutor.

Automated analysis of short responses in an interactive synthetic tutoring system for introductory physics

Directory of Open Access Journals (Sweden)

Christopher M. Nakamura

2016-03-01

Full Text Available Computer-automated assessment of students’ text responses to short-answer questions represents an important enabling technology for online learning environments. We have investigated the use of machine learning to train computer models capable of automatically classifying short-answer responses and assessed the results. Our investigations are part of a project to develop and test an interactive learning environment designed to help students learn introductory physics concepts. The system is designed around an interactive video tutoring interface. We have analyzed 9 with about 150 responses or less. We observe for 4 of the 9 automated assessment with interrater agreement of 70% or better with the human rater. This level of agreement may represent a baseline for practical utility in instruction and indicates that the method warrants further investigation for use in this type of application. Our results also suggest strategies that may be useful for writing activities and questions that are more appropriate for automated assessment. These strategies include building activities that have relatively few conceptually distinct ways of perceiving the physical behavior of relatively few physical objects. Further success in this direction may allow us to promote interactivity and better provide feedback in online learning systems. These capabilities could enable our system to function more like a real tutor.

Motion based parsing for video from observational psychology

Science.gov (United States)

Kokaram, Anil; Doyle, Erika; Lennon, Daire; Joyeux, Laurent; Fuller, Ray

2006-01-01

In Psychology it is common to conduct studies involving the observation of humans undertaking some task. The sessions are typically recorded on video and used for subjective visual analysis. The subjective analysis is tedious and time consuming, not only because much useless video material is recorded but also because subjective measures of human behaviour are not necessarily repeatable. This paper presents tools using content based video analysis that allow automated parsing of video from one such study involving Dyslexia. The tools rely on implicit measures of human motion that can be generalised to other applications in the domain of human observation. Results comparing quantitative assessment of human motion with subjective assessment are also presented, illustrating that the system is a useful scientific tool.

Small cities face greater impact from automation

Science.gov (United States)

Sun, Lijun; Cebrian, Manuel; Rahwan, Iyad

2018-01-01

The city has proved to be the most successful form of human agglomeration and provides wide employment opportunities for its dwellers. As advances in robotics and artificial intelligence revive concerns about the impact of automation on jobs, a question looms: how will automation affect employment in cities? Here, we provide a comparative picture of the impact of automation across US urban areas. Small cities will undertake greater adjustments, such as worker displacement and job content substitutions. We demonstrate that large cities exhibit increased occupational and skill specialization due to increased abundance of managerial and technical professions. These occupations are not easily automatable, and, thus, reduce the potential impact of automation in large cities. Our results pass several robustness checks including potential errors in the estimation of occupational automation and subsampling of occupations. Our study provides the first empirical law connecting two societal forces: urban agglomeration and automation's impact on employment. PMID:29436514

Small cities face greater impact from automation.

Science.gov (United States)

Frank, Morgan R; Sun, Lijun; Cebrian, Manuel; Youn, Hyejin; Rahwan, Iyad

2018-02-01

The city has proved to be the most successful form of human agglomeration and provides wide employment opportunities for its dwellers. As advances in robotics and artificial intelligence revive concerns about the impact of automation on jobs, a question looms: how will automation affect employment in cities? Here, we provide a comparative picture of the impact of automation across US urban areas. Small cities will undertake greater adjustments, such as worker displacement and job content substitutions. We demonstrate that large cities exhibit increased occupational and skill specialization due to increased abundance of managerial and technical professions. These occupations are not easily automatable, and, thus, reduce the potential impact of automation in large cities. Our results pass several robustness checks including potential errors in the estimation of occupational automation and subsampling of occupations. Our study provides the first empirical law connecting two societal forces: urban agglomeration and automation's impact on employment. © 2018 The Authors.

Automated Detection of Heuristics and Biases among Pathologists in a Computer-Based System

Science.gov (United States)

Crowley, Rebecca S.; Legowski, Elizabeth; Medvedeva, Olga; Reitmeyer, Kayse; Tseytlin, Eugene; Castine, Melissa; Jukic, Drazen; Mello-Thoms, Claudia

2013-01-01

The purpose of this study is threefold: (1) to develop an automated, computer-based method to detect heuristics and biases as pathologists examine virtual slide cases, (2) to measure the frequency and distribution of heuristics and errors across three levels of training, and (3) to examine relationships of heuristics to biases, and biases to…

Analysis of growth patterns during gravitropic curvature in roots of Zea mays by use of a computer-based video digitizer

Science.gov (United States)

Nelson, A. J.; Evans, M. L.

1986-01-01

A computer-based video digitizer system is described which allows automated tracking of markers placed on a plant surface. The system uses customized software to calculate relative growth rates at selected positions along the plant surface and to determine rates of gravitropic curvature based on the changing pattern of distribution of the surface markers. The system was used to study the time course of gravitropic curvature and changes in relative growth rate along the upper and lower surface of horizontally-oriented roots of maize (Zea mays L.). The growing region of the root was found to extend from about 1 mm behind the tip to approximately 6 mm behind the tip. In vertically-oriented roots the relative growth rate was maximal at about 2.5 mm behind the tip and declined smoothly on either side of the maximum. Curvature was initiated approximately 30 min after horizontal orientation with maximal (50 degrees) curvature being attained in 3 h. Analysis of surface extension patterns during the response indicated that curvature results from a reduction in growth rate along both the upper and lower surfaces with stronger reduction along the lower surface.

CloVR: a virtual machine for automated and portable sequence analysis from the desktop using cloud computing.

Science.gov (United States)

Angiuoli, Samuel V; Matalka, Malcolm; Gussman, Aaron; Galens, Kevin; Vangala, Mahesh; Riley, David R; Arze, Cesar; White, James R; White, Owen; Fricke, W Florian

2011-08-30

Next-generation sequencing technologies have decentralized sequence acquisition, increasing the demand for new bioinformatics tools that are easy to use, portable across multiple platforms, and scalable for high-throughput applications. Cloud computing platforms provide on-demand access to computing infrastructure over the Internet and can be used in combination with custom built virtual machines to distribute pre-packaged with pre-configured software. We describe the Cloud Virtual Resource, CloVR, a new desktop application for push-button automated sequence analysis that can utilize cloud computing resources. CloVR is implemented as a single portable virtual machine (VM) that provides several automated analysis pipelines for microbial genomics, including 16S, whole genome and metagenome sequence analysis. The CloVR VM runs on a personal computer, utilizes local computer resources and requires minimal installation, addressing key challenges in deploying bioinformatics workflows. In addition CloVR supports use of remote cloud computing resources to improve performance for large-scale sequence processing. In a case study, we demonstrate the use of CloVR to automatically process next-generation sequencing data on multiple cloud computing platforms. The CloVR VM and associated architecture lowers the barrier of entry for utilizing complex analysis protocols on both local single- and multi-core computers and cloud systems for high throughput data processing.

Video games as a multifaceted medium: a review of quantitative social science research on video games and a typology of video game research approaches

OpenAIRE

Ivory, James D.

2013-01-01

Although there is a vast and useful body of quantitative social science research dealing with the social role and impact of video games, it is difficult to compare studies dealing with various dimensions of video games because they are informed by different perspectives and assumptions, employ different methodologies, and address different problems. Studies focusing on different social dimensions of video games can produce varied findings about games' social function that are often difficult...

Automated Ecological Assessment of Physical Activity: Advancing Direct Observation.

Science.gov (United States)

Carlson, Jordan A; Liu, Bo; Sallis, James F; Kerr, Jacqueline; Hipp, J Aaron; Staggs, Vincent S; Papa, Amy; Dean, Kelsey; Vasconcelos, Nuno M

2017-12-01

Technological advances provide opportunities for automating direct observations of physical activity, which allow for continuous monitoring and feedback. This pilot study evaluated the initial validity of computer vision algorithms for ecological assessment of physical activity. The sample comprised 6630 seconds per camera (three cameras in total) of video capturing up to nine participants engaged in sitting, standing, walking, and jogging in an open outdoor space while wearing accelerometers. Computer vision algorithms were developed to assess the number and proportion of people in sedentary, light, moderate, and vigorous activity, and group-based metabolic equivalents of tasks (MET)-minutes. Means and standard deviations (SD) of bias/difference values, and intraclass correlation coefficients (ICC) assessed the criterion validity compared to accelerometry separately for each camera. The number and proportion of participants sedentary and in moderate-to-vigorous physical activity (MVPA) had small biases (within 20% of the criterion mean) and the ICCs were excellent (0.82-0.98). Total MET-minutes were slightly underestimated by 9.3-17.1% and the ICCs were good (0.68-0.79). The standard deviations of the bias estimates were moderate-to-large relative to the means. The computer vision algorithms appeared to have acceptable sample-level validity (i.e., across a sample of time intervals) and are promising for automated ecological assessment of activity in open outdoor settings, but further development and testing is needed before such tools can be used in a diverse range of settings.

Automated Ecological Assessment of Physical Activity: Advancing Direct Observation

Directory of Open Access Journals (Sweden)

Jordan A. Carlson

2017-12-01

Full Text Available Technological advances provide opportunities for automating direct observations of physical activity, which allow for continuous monitoring and feedback. This pilot study evaluated the initial validity of computer vision algorithms for ecological assessment of physical activity. The sample comprised 6630 seconds per camera (three cameras in total of video capturing up to nine participants engaged in sitting, standing, walking, and jogging in an open outdoor space while wearing accelerometers. Computer vision algorithms were developed to assess the number and proportion of people in sedentary, light, moderate, and vigorous activity, and group-based metabolic equivalents of tasks (MET-minutes. Means and standard deviations (SD of bias/difference values, and intraclass correlation coefficients (ICC assessed the criterion validity compared to accelerometry separately for each camera. The number and proportion of participants sedentary and in moderate-to-vigorous physical activity (MVPA had small biases (within 20% of the criterion mean and the ICCs were excellent (0.82–0.98. Total MET-minutes were slightly underestimated by 9.3–17.1% and the ICCs were good (0.68–0.79. The standard deviations of the bias estimates were moderate-to-large relative to the means. The computer vision algorithms appeared to have acceptable sample-level validity (i.e., across a sample of time intervals and are promising for automated ecological assessment of activity in open outdoor settings, but further development and testing is needed before such tools can be used in a diverse range of settings.

A Taxonomy of Asynchronous Instructional Video Styles

Science.gov (United States)

Chorianopoulos, Konstantinos

2018-01-01

Many educational organizations are employing instructional videos in their pedagogy, but there is a limited understanding of the possible video formats. In practice, the presentation format of instructional videos ranges from direct recording of classroom teaching with a stationary camera, or screencasts with voiceover, to highly elaborate video…

Automation and schema acquisition in learning elementary computer programming : implications for the design of practice

NARCIS (Netherlands)

van Merrienboer, Jeroen J.G.; van Merrienboer, J.J.G.; Paas, Fred G.W.C.

1990-01-01

Two complementary processes may be distinguished in learning a complex cognitive skill such as computer programming. First, automation offers task-specific procedures that may directly control programming behavior, second, schema acquisition offers cognitive structures that provide analogies in new

Using three-channel video to evaluate the impact of the use of the computer on the patient-centredness of the general practice consultation

Directory of Open Access Journals (Sweden)

Alice Theadom

2003-11-01

Three-channel video proved to be a feasible and valuable technique for the analysis of primary care GP consultations, with advantages over single-channel video. Interesting differences in non-verbal and verbal behaviour became apparent with different types of computer use during the consultation. Implications for the three-channel video technique for training, monitoring GP competence and providing feedback are discussed.

Altering user' acceptance of automation through prior automation exposure.

Science.gov (United States)

Bekier, Marek; Molesworth, Brett R C

2017-06-01

Air navigation service providers worldwide see increased use of automation as one solution to overcome the capacity constraints imbedded in the present air traffic management (ATM) system. However, increased use of automation within any system is dependent on user acceptance. The present research sought to determine if the point at which an individual is no longer willing to accept or cooperate with automation can be manipulated. Forty participants underwent training on a computer-based air traffic control programme, followed by two ATM exercises (order counterbalanced), one with and one without the aid of automation. Results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation ('tipping point') decreased; suggesting it is indeed possible to alter automation acceptance. Practitioner Summary: This paper investigates whether the point at which a user of automation rejects automation (i.e. 'tipping point') is constant or can be manipulated. The results revealed after exposure to a task with automation assistance, user acceptance of high(er) levels of automation decreased; suggesting it is possible to alter automation acceptance.

Prototype of a computer system for managing data and video colonoscopy exams

Directory of Open Access Journals (Sweden)

Renato Bobsin Machado

2012-03-01

Full Text Available OBJECTIVE: Develop a prototype using computer resources to optimize the management process of clinical information and video colonoscopy exams. MATERIALS AND METHODS: Through meetings with medical and computer experts, the following requirements were defined: management of information about medical professionals, patients and exams; video and image captured by video colonoscopes during the exam, and the availability of these videos and images on the Web for further analysis. The technologies used were Java, Flex, JBoss, Red5, JBoss SEAM, MySQL and Flamingo. RESULTS AND DISCUSSION: The prototype contributed to the area of colonocospy by providing resources to maintain the patients' history, tests and images from video colonoscopies. The web-based application allows greater flexibility to physicians and specialists. The resources for remote analysis of data and tests can help doctors and patients in the examination and diagnosis. CONCLUSION: The implemented prototype has contributed to improve colonoscopy-related processes. Future activities include the prototype deployment in the Service of Coloproctology and the utilization of this model to allow real-time monitoring of these exams and knowledge extraction from such structured database using artificial intelligence.OBJETIVO: Desenvolver um protótipo por meio de recursos computacionais para a otimização de processos de gerenciamento de informações clínicas e de exames de videocolonoscopia. MATERIAIS E MÉTODOS: Por meio de reuniões com especialistas médicos e computacionais, definiram-se os seguintes requisitos: gestão de informações sobre profissionais médicos, pacientes e exames complementares; aquisição dos vídeos e captura de imagens a partir do videocolonoscópio durante a realização desse exame, e a disponibilidade por meio da Web para análise posterior dessas imagens. As tecnologias aplicadas foram: Java, Flex, JBOSS, Red5, JBOSS SEAM, MySQL e Flamingo. RESULTADOS E

Computer-Based Video Instruction to Teach Students with Intellectual Disabilities to Use Public Bus Transportation

Science.gov (United States)

Mechling, Linda; O'Brien, Eileen

2010-01-01

This study investigated the effectiveness of computer-based video instruction (CBVI) to teach three young adults with moderate intellectual disabilities to push a "request to stop bus signal" and exit a city bus in response to target landmarks. A multiple probe design across three students and one bus route was used to evaluate effectiveness of…

Computer program for the automated attendance accounting system

Science.gov (United States)

Poulson, P.; Rasmusson, C.

1971-01-01

The automated attendance accounting system (AAAS) was developed under the auspices of the Space Technology Applications Program. The task is basically the adaptation of a small digital computer, coupled with specially developed pushbutton terminals located in school classrooms and offices for the purpose of taking daily attendance, maintaining complete attendance records, and producing partial and summary reports. Especially developed for high schools, the system is intended to relieve both teachers and office personnel from the time-consuming and dreary task of recording and analyzing the myriad classroom attendance data collected throughout the semester. In addition, since many school district budgets are related to student attendance, the increase in accounting accuracy is expected to augment district income. A major component of this system is the real-time AAAS software system, which is described.

World-wide distribution automation systems

International Nuclear Information System (INIS)

Devaney, T.M.

1994-01-01

A worldwide power distribution automation system is outlined. Distribution automation is defined and the status of utility automation is discussed. Other topics discussed include a distribution management system, substation feeder, and customer functions, potential benefits, automation costs, planning and engineering considerations, automation trends, databases, system operation, computer modeling of system, and distribution management systems

Automated segmentation of pulmonary structures in thoracic computed tomography scans: a review

International Nuclear Information System (INIS)

Van Rikxoort, Eva M; Van Ginneken, Bram

2013-01-01

Computed tomography (CT) is the modality of choice for imaging the lungs in vivo. Sub-millimeter isotropic images of the lungs can be obtained within seconds, allowing the detection of small lesions and detailed analysis of disease processes. The high resolution of thoracic CT and the high prevalence of lung diseases require a high degree of automation in the analysis pipeline. The automated segmentation of pulmonary structures in thoracic CT has been an important research topic for over a decade now. This systematic review provides an overview of current literature. We discuss segmentation methods for the lungs, the pulmonary vasculature, the airways, including airway tree construction and airway wall segmentation, the fissures, the lobes and the pulmonary segments. For each topic, the current state of the art is summarized, and topics for future research are identified. (topical review)

26 CFR 1.1402(a)-2 - Computation of net earnings from self-employment.

Science.gov (United States)

2010-04-01

... TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Tax on Self-Employment Income § 1.1402(a)-2 Computation of net earnings from self-employment. (a) General rule. In general, the gross income and... ascertaining his net earnings from self-employment, are to be determined by reference to the provisions of law...

Composite Wavelet Filters for Enhanced Automated Target Recognition

Science.gov (United States)

Chiang, Jeffrey N.; Zhang, Yuhan; Lu, Thomas T.; Chao, Tien-Hsin

2012-01-01

Automated Target Recognition (ATR) systems aim to automate target detection, recognition, and tracking. The current project applies a JPL ATR system to low-resolution sonar and camera videos taken from unmanned vehicles. These sonar images are inherently noisy and difficult to interpret, and pictures taken underwater are unreliable due to murkiness and inconsistent lighting. The ATR system breaks target recognition into three stages: 1) Videos of both sonar and camera footage are broken into frames and preprocessed to enhance images and detect Regions of Interest (ROIs). 2) Features are extracted from these ROIs in preparation for classification. 3) ROIs are classified as true or false positives using a standard Neural Network based on the extracted features. Several preprocessing, feature extraction, and training methods are tested and discussed in this paper.

Video quality measure for mobile IPTV service

Science.gov (United States)

Kim, Wonjun; Kim, Changick

2008-08-01

Mobile IPTV is a multimedia service based on wireless networks with interactivity and mobility. Under mobile IPTV scenarios, people can watch various contents whenever they want and even deliver their request to service providers through the network. However, the frequent change of the wireless channel bandwidth may hinder the quality of service. In this paper, we propose an objective video quality measure (VQM) for mobile IPTV services, which is focused on the jitter measurement. Jitter is the result of frame repetition during the delay and one of the most severe impairments in the video transmission via mobile channels. We first employ YUV color space to compute the duration and occurrences of jitter and the motion activity. Then the VQM is modeled by the combination of these three factors and the result of subjective assessment. Since the proposed VQM is based on no-reference (NR) model, it can be applied for real-time applications. Experimental results show that the proposed VQM highly correlates to subjective evaluation.

Automated Podcasting System for Universities

Directory of Open Access Journals (Sweden)

Ypatios Grigoriadis

2013-03-01

Full Text Available This paper presents the results achieved at Graz University of Technology (TU Graz in the field of automating the process of recording and publishing university lectures in a very new way. It outlines cornerstones of the development and integration of an automated recording system such as the lecture hall setup, the recording hardware and software architecture as well as the development of a text-based search for the final product by method of indexing video podcasts. Furthermore, the paper takes a look at didactical aspects, evaluations done in this context and future outlook.

Automated real-time detection of tonic-clonic seizures using a wearable EMG device

DEFF Research Database (Denmark)

Beniczky, Sándor; Conradsen, Isa; Henning, Oliver

2018-01-01

OBJECTIVE: To determine the accuracy of automated detection of generalized tonic-clonic seizures (GTCS) using a wearable surface EMG device. METHODS: We prospectively tested the technical performance and diagnostic accuracy of real-time seizure detection using a wearable surface EMG device....... The seizure detection algorithm and the cutoff values were prespecified. A total of 71 patients, referred to long-term video-EEG monitoring, on suspicion of GTCS, were recruited in 3 centers. Seizure detection was real-time and fully automated. The reference standard was the evaluation of video-EEG recordings...

Effect Through Broadcasting System Access Point For Video Transmission

Directory of Open Access Journals (Sweden)

Leni Marlina

2015-08-01

Full Text Available Most universities are already implementing wired and wireless network that is used to access integrated information systems and the Internet. At present it is important to do research on the influence of the broadcasting system through the access point for video transmitter learning in the university area. At every university computer network through the access point must also use the cable in its implementation. These networks require cables that will connect and transmit data from one computer to another computer. While wireless networks of computers connected through radio waves. This research will be a test or assessment of how the influence of the network using the WLAN access point for video broadcasting means learning from the server to the client. Instructional video broadcasting from the server to the client via the access point will be used for video broadcasting means of learning. This study aims to understand how to build a wireless network by using an access point. It also builds a computer server as instructional videos supporting software that can be used for video server that will be emitted by broadcasting via the access point and establish a system of transmitting video from the server to the client via the access point.

Computer simulation and automation of data processing

International Nuclear Information System (INIS)

Tikhonov, A.N.

1981-01-01

The principles of computerized simulation and automation of data processing are presented. The automized processing system is constructed according to the module-hierarchical principle. The main operating conditions of the system are as follows: preprocessing, installation analysis, interpretation, accuracy analysis and controlling parameters. The definition of the quasireal experiment permitting to plan the real experiment is given. It is pointed out that realization of the quasireal experiment by means of the computerized installation model with subsequent automized processing permits to scan the quantitative aspect of the system as a whole as well as provides optimal designing of installation parameters for obtaining maximum resolution [ru

Automated Generation of User Guidance by Combining Computation and Deduction

Directory of Open Access Journals (Sweden)

Walther Neuper

2012-02-01

Full Text Available Herewith, a fairly old concept is published for the first time and named "Lucas Interpretation". This has been implemented in a prototype, which has been proved useful in educational practice and has gained academic relevance with an emerging generation of educational mathematics assistants (EMA based on Computer Theorem Proving (CTP. Automated Theorem Proving (ATP, i.e. deduction, is the most reliable technology used to check user input. However ATP is inherently weak in automatically generating solutions for arbitrary problems in applied mathematics. This weakness is crucial for EMAs: when ATP checks user input as incorrect and the learner gets stuck then the system should be able to suggest possible next steps. The key idea of Lucas Interpretation is to compute the steps of a calculation following a program written in a novel CTP-based programming language, i.e. computation provides the next steps. User guidance is generated by combining deduction and computation: the latter is performed by a specific language interpreter, which works like a debugger and hands over control to the learner at breakpoints, i.e. tactics generating the steps of calculation. The interpreter also builds up logical contexts providing ATP with the data required for checking user input, thus combining computation and deduction. The paper describes the concepts underlying Lucas Interpretation so that open questions can adequately be addressed, and prerequisites for further work are provided.

CloVR: A virtual machine for automated and portable sequence analysis from the desktop using cloud computing

Science.gov (United States)

2011-01-01

Background Next-generation sequencing technologies have decentralized sequence acquisition, increasing the demand for new bioinformatics tools that are easy to use, portable across multiple platforms, and scalable for high-throughput applications. Cloud computing platforms provide on-demand access to computing infrastructure over the Internet and can be used in combination with custom built virtual machines to distribute pre-packaged with pre-configured software. Results We describe the Cloud Virtual Resource, CloVR, a new desktop application for push-button automated sequence analysis that can utilize cloud computing resources. CloVR is implemented as a single portable virtual machine (VM) that provides several automated analysis pipelines for microbial genomics, including 16S, whole genome and metagenome sequence analysis. The CloVR VM runs on a personal computer, utilizes local computer resources and requires minimal installation, addressing key challenges in deploying bioinformatics workflows. In addition CloVR supports use of remote cloud computing resources to improve performance for large-scale sequence processing. In a case study, we demonstrate the use of CloVR to automatically process next-generation sequencing data on multiple cloud computing platforms. Conclusion The CloVR VM and associated architecture lowers the barrier of entry for utilizing complex analysis protocols on both local single- and multi-core computers and cloud systems for high throughput data processing. PMID:21878105

Image processing of integrated video image obtained with a charged-particle imaging video monitor system

International Nuclear Information System (INIS)

Iida, Takao; Nakajima, Takehiro

1988-01-01

A new type of charged-particle imaging video monitor system was constructed for video imaging of the distributions of alpha-emitting and low-energy beta-emitting nuclides. The system can display not only the scintillation image due to radiation on the video monitor but also the integrated video image becoming gradually clearer on another video monitor. The distortion of the image is about 5% and the spatial resolution is about 2 line pairs (lp)mm -1 . The integrated image is transferred to a personal computer and image processing is performed qualitatively and quantitatively. (author)

Application of process computers for automation of power plants in Hungary

Energy Technology Data Exchange (ETDEWEB)

Papp, G.; Szilagyi, R.

1982-04-01

An automation system for normal operation and accidents is presented. In normal operation, the operators have only a supervisory function. In case of disturbances, only a minimum number of units will fail. Process computer data are: Storage cycle: 750 ns; parallel system; length of configuration: 12 bit; one-address binary two-complement arithmetic; operative ferromagnetic storage: 24 K; core register: 5. There are two peripheral disk storages with a total capacity of 6 Mbit and two floppy disk storages, each with a capacity of 800 Kbit.

Computers and Communications. Improving the Employability of Persons with Handicaps.

Science.gov (United States)

Deitel, Harvey M.

1984-01-01

Reviews applications of computer and communications technologies for persons with visual, hearing, physical, speech, and language impairments, as well as the effects of technologies on transportation, work at home, education, and other aspects affecting the employment of the disabled. (SK)

Enabling Wide-Scale Computer Science Education through Improved Automated Assessment Tools

Science.gov (United States)

Boe, Bryce A.

There is a proliferating demand for newly trained computer scientists as the number of computer science related jobs continues to increase. University programs will only be able to train enough new computer scientists to meet this demand when two things happen: when there are more primary and secondary school students interested in computer science, and when university departments have the resources to handle the resulting increase in enrollment. To meet these goals, significant effort is being made to both incorporate computational thinking into existing primary school education, and to support larger university computer science class sizes. We contribute to this effort through the creation and use of improved automated assessment tools. To enable wide-scale computer science education we do two things. First, we create a framework called Hairball to support the static analysis of Scratch programs targeted for fourth, fifth, and sixth grade students. Scratch is a popular building-block language utilized to pique interest in and teach the basics of computer science. We observe that Hairball allows for rapid curriculum alterations and thus contributes to wide-scale deployment of computer science curriculum. Second, we create a real-time feedback and assessment system utilized in university computer science classes to provide better feedback to students while reducing assessment time. Insights from our analysis of student submission data show that modifications to the system configuration support the way students learn and progress through course material, making it possible for instructors to tailor assignments to optimize learning in growing computer science classes.

Program software for the automated processing of gravity and magnetic survey data for the Mir computer

Energy Technology Data Exchange (ETDEWEB)

Lyubimov, G.A.

1980-01-01

A presentation is made of the content of program software for the automated processing of gravity and magnetic survey data for the small Mir-1 and Mir-2 computers as worked out on the Voronezh geophysical expedition.

Mobile Computing and Cloud maturity - Introducing Machine Learning for ERP Configuration Automation

Directory of Open Access Journals (Sweden)

Elena Geanina ULARU

2013-01-01

Full Text Available Nowadays the smart phone market is clearly growing due to the new type of functionalities that mobile devices have and the role that they play in everyday life. Their utility and benefits rely on the applications that can be installed on the device (the so-called mobile apps. Cloud computing is a way to enhance the world of mobile application by providing disk space and freeing the user of the local storage needs, this way providing cheaper storage, wider acces-sibility and greater speed for business. In this paper we introduce various aspects of mobile computing and we stress the importance of obtaining cloud maturity by using machine learning for automating configurations of software applications deployed on cloud nodes using the open source application ERP5 and SlapOS, an open source operating system for Decentralized Cloud Computing.

Automated image-based colon cleansing for laxative-free CT colonography computer-aided polyp detection

International Nuclear Information System (INIS)

Linguraru, Marius George; Panjwani, Neil; Fletcher, Joel G.; Summer, Ronald M.

2011-01-01

Purpose: To evaluate the performance of a computer-aided detection (CAD) system for detecting colonic polyps at noncathartic computed tomography colonography (CTC) in conjunction with an automated image-based colon cleansing algorithm. Methods: An automated colon cleansing algorithm was designed to detect and subtract tagged-stool, accounting for heterogeneity and poor tagging, to be used in conjunction with a colon CAD system. The method is locally adaptive and combines intensity, shape, and texture analysis with probabilistic optimization. CTC data from cathartic-free bowel preparation were acquired for testing and training the parameters. Patients underwent various colonic preparations with barium or Gastroview in divided doses over 48 h before scanning. No laxatives were administered and no dietary modifications were required. Cases were selected from a polyp-enriched cohort and included scans in which at least 90% of the solid stool was visually estimated to be tagged and each colonic segment was distended in either the prone or supine view. The CAD system was run comparatively with and without the stool subtraction algorithm. Results: The dataset comprised 38 CTC scans from prone and/or supine scans of 19 patients containing 44 polyps larger than 10 mm (22 unique polyps, if matched between prone and supine scans). The results are robust on fine details around folds, thin-stool linings on the colonic wall, near polyps and in large fluid/stool pools. The sensitivity of the CAD system is 70.5% per polyp at a rate of 5.75 false positives/scan without using the stool subtraction module. This detection improved significantly (p = 0.009) after automated colon cleansing on cathartic-free data to 86.4% true positive rate at 5.75 false positives/scan. Conclusions: An automated image-based colon cleansing algorithm designed to overcome the challenges of the noncathartic colon significantly improves the sensitivity of colon CAD by approximately 15%.

Video Toroid Cavity Imager

Energy Technology Data Exchange (ETDEWEB)

Gerald, Rex E. II; Sanchez, Jairo; Rathke, Jerome W.

2004-08-10

A video toroid cavity imager for in situ measurement of electrochemical properties of an electrolytic material sample includes a cylindrical toroid cavity resonator containing the sample and employs NMR and video imaging for providing high-resolution spectral and visual information of molecular characteristics of the sample on a real-time basis. A large magnetic field is applied to the sample under controlled temperature and pressure conditions to simultaneously provide NMR spectroscopy and video imaging capabilities for investigating electrochemical transformations of materials or the evolution of long-range molecular aggregation during cooling of hydrocarbon melts. The video toroid cavity imager includes a miniature commercial video camera with an adjustable lens, a modified compression coin cell imager with a fiat circular principal detector element, and a sample mounted on a transparent circular glass disk, and provides NMR information as well as a video image of a sample, such as a polymer film, with micrometer resolution.

Video-Guidance Design for the DART Rendezvous Mission

Science.gov (United States)

Ruth, Michael; Tracy, Chisholm

2004-01-01

NASA's Demonstration of Autonomous Rendezvous Technology (DART) mission will validate a number of different guidance technologies, including state-differenced GPS transfers and close-approach video guidance. The video guidance for DART will employ NASA/Marshall s Advanced Video Guidance Sensor (AVGS). This paper focuses on the terminal phase of the DART mission that includes close-approach maneuvers under AVGS guidance. The closed-loop video guidance design for DART is driven by a number of competing requirements, including a need for maximizing tracking bandwidths while coping with measurement noise and the need to minimize RCS firings. A range of different strategies for attitude control and docking guidance have been considered for the DART mission, and design decisions are driven by a goal of minimizing both the design complexity and the effects of video guidance lags. The DART design employs an indirect docking approach, in which the guidance position targets are defined using relative attitude information. Flight simulation results have proven the effectiveness of the video guidance design.

Distributed computing system with dual independent communications paths between computers and employing split tokens

Science.gov (United States)

Rasmussen, Robert D. (Inventor); Manning, Robert M. (Inventor); Lewis, Blair F. (Inventor); Bolotin, Gary S. (Inventor); Ward, Richard S. (Inventor)

1990-01-01

This is a distributed computing system providing flexible fault tolerance; ease of software design and concurrency specification; and dynamic balance of the loads. The system comprises a plurality of computers each having a first input/output interface and a second input/output interface for interfacing to communications networks each second input/output interface including a bypass for bypassing the associated computer. A global communications network interconnects the first input/output interfaces for providing each computer the ability to broadcast messages simultaneously to the remainder of the computers. A meshwork communications network interconnects the second input/output interfaces providing each computer with the ability to establish a communications link with another of the computers bypassing the remainder of computers. Each computer is controlled by a resident copy of a common operating system. Communications between respective ones of computers is by means of split tokens each having a moving first portion which is sent from computer to computer and a resident second portion which is disposed in the memory of at least one of computer and wherein the location of the second portion is part of the first portion. The split tokens represent both functions to be executed by the computers and data to be employed in the execution of the functions. The first input/output interfaces each include logic for detecting a collision between messages and for terminating the broadcasting of a message whereby collisions between messages are detected and avoided.

Small cities face greater impact from automation

OpenAIRE

Frank, Morgan R.; Sun, Lijun; Cebrian, Manuel; Youn, Hyejin; Rahwan, Iyad

2017-01-01

The city has proven to be the most successful form of human agglomeration and provides wide employment opportunities for its dwellers. As advances in robotics and artificial intelligence revive concerns about the impact of automation on jobs, a question looms: How will automation affect employment in cities? Here, we provide a comparative picture of the impact of automation across U.S. urban areas. Small cities will undertake greater adjustments, such as worker displacement and job content su...

Architectural Considerations for Highly Scalable Computing to Support On-demand Video Analytics

Science.gov (United States)

2017-04-19

research were used to implement a distributed on-demand video analytics system that was prototyped for the use of forensics investigators in law...demand video intelligence; intelligent video system ; video analytics platform I. INTRODUCTION Video Analytics systems has been of tremendous interest...enforcement. The system was tested in the wild using video files as well as a commercial Video Management System supporting more than 100 surveillance

Berkeley automated supernova search

Energy Technology Data Exchange (ETDEWEB)

Kare, J.T.; Pennypacker, C.R.; Muller, R.A.; Mast, T.S.; Crawford, F.S.; Burns, M.S.

1981-01-01

The Berkeley automated supernova search employs a computer controlled 36-inch telescope and charge coupled device (CCD) detector to image 2500 galaxies per night. A dedicated minicomputer compares each galaxy image with stored reference data to identify supernovae in real time. The threshold for detection is m/sub v/ = 18.8. We plan to monitor roughly 500 galaxies in Virgo and closer every night, and an additional 6000 galaxies out to 70 Mpc on a three night cycle. This should yield very early detection of several supernovae per year for detailed study, and reliable premaximum detection of roughly 100 supernovae per year for statistical studies. The search should be operational in mid-1982.

Berkeley automated supernova search

International Nuclear Information System (INIS)

Kare, J.T.; Pennypacker, C.R.; Muller, R.A.; Mast, T.S.

1981-01-01

The Berkeley automated supernova search employs a computer controlled 36-inch telescope and charge coupled device (CCD) detector to image 2500 galaxies per night. A dedicated minicomputer compares each galaxy image with stored reference data to identify supernovae in real time. The threshold for detection is m/sub v/ = 18.8. We plan to monitor roughly 500 galaxies in Virgo and closer every night, and an additional 6000 galaxies out to 70 Mpc on a three night cycle. This should yield very early detection of several supernovae per year for detailed study, and reliable premaximum detection of roughly 100 supernovae per year for statistical studies. The search should be operational in mid-1982

INTEGRATION OF VIDEO IMAGES AND CAD WIREFRAMES FOR 3D OBJECT LOCALIZATION

Directory of Open Access Journals (Sweden)

R. A. Persad

2012-07-01

Full Text Available The tracking of moving objects from single images has received widespread attention in photogrammetric computer vision and considered to be at a state of maturity. This paper presents a model-driven solution for localizing moving objects detected from monocular, rotating and zooming video images in a 3D reference frame. To realize such a system, the recovery of 2D to 3D projection parameters is essential. Automatic estimation of these parameters is critical, particularly for pan-tilt-zoom (PTZ surveillance cameras where parameters change spontaneously upon camera motion. In this work, an algorithm for automated parameter retrieval is proposed. This is achieved by matching linear features between incoming images from video sequences and simple geometric 3D CAD wireframe models of man-made structures. The feature matching schema uses a hypothesis-verify optimization framework referred to as LR-RANSAC. This novel method improves the computational efficiency of the matching process in comparison to the standard RANSAC robust estimator. To demonstrate the applicability and performance of the method, experiments have been performed on indoor and outdoor image sequences under varying conditions with lighting changes and occlusions. Reliability of the matching algorithm has been analyzed by comparing the automatically determined camera parameters with ground truth (GT. Dependability of the retrieved parameters for 3D localization has also been assessed by comparing the difference between 3D positions of moving image objects estimated using the LR-RANSAC-derived parameters and those computed using GT parameters.

Subject Anonymisation in Video Reporting. Is Animation an option?

DEFF Research Database (Denmark)

Brooks, Anthony Lewis

2012-01-01

This short-paper contribution questions the potential of a simple automated video-to-animation rotoscoping technique to provide subject anonymity and confidentiality to conform to ethical regulations whilst maintaining sufficient portraiture data to convey research outcome. This can be especially...

Gait Analysis by Multi Video Sequence Analysis

DEFF Research Database (Denmark)

Jensen, Karsten; Juhl, Jens

2009-01-01

The project presented in this article aims to develop software so that close-range photogrammetry with sufficient accuracy can be used to point out the most frequent foot mal positions and monitor the effect of the traditional treatment. The project is carried out as a cooperation between...... and the calcaneus angle during gait. In the introductory phase of the project the task has been to select, purchase and draw up hardware, select and purchase software concerning video streaming and to develop special software concerning automated registration of the position of the foot during gait by Multi Video...

A Conceptual Review of Research on the Pathological Use of Computers, Video Games, and the Internet

Science.gov (United States)

Sim, Timothy; Gentile, Douglas A.; Bricolo, Francesco; Serpelloni, Giovanni; Gulamoydeen, Farah

2012-01-01

Preliminary research studies suggest that some people who use computer, video games, and the Internet heavily develop dysfunctional symptoms, often referred to in the popular press as an "addiction." Although several studies have measured various facets of this issue, there has been no common framework within which to view these studies. This…

Applications of the soft computing in the automated history matching

Energy Technology Data Exchange (ETDEWEB)

Silva, P.C.; Maschio, C.; Schiozer, D.J. [Unicamp (Brazil)

2006-07-01

Reservoir management is a research field in petroleum engineering that optimizes reservoir performance based on environmental, political, economic and technological criteria. Reservoir simulation is based on geological models that simulate fluid flow. Models must be constantly corrected to yield the observed production behaviour. The process of history matching is controlled by the comparison of production data, well test data and measured data from simulations. Parametrization, objective function analysis, sensitivity analysis and uncertainty analysis are important steps in history matching. One of the main challenges facing automated history matching is to develop algorithms that find the optimal solution in multidimensional search spaces. Optimization algorithms can be either global optimizers that work with noisy multi-modal functions, or local optimizers that cannot work with noisy multi-modal functions. The problem with global optimizers is the very large number of function calls, which is an inconvenience due to the long reservoir simulation time. For that reason, techniques such as least squared, thin plane spline, kriging and artificial neural networks (ANN) have been used as substitutes to reservoir simulators. This paper described the use of optimization algorithms to find optimal solution in automated history matching. Several ANN were used, including the generalized regression neural network, fuzzy system with subtractive clustering and radial basis network. The UNIPAR soft computing method was used along with a modified Hooke- Jeeves optimization method. Two case studies with synthetic and real reservoirs are examined. It was concluded that the combination of global and local optimization has the potential to improve the history matching process and that the use of substitute models can reduce computational efforts. 15 refs., 11 figs.

Towards an automated analysis of video-microscopy images of fungal morphogenesis

Directory of Open Access Journals (Sweden)

Diéguez-Uribeondo, Javier

2005-06-01

Full Text Available Fungal morphogenesis is an exciting field of cell biology and several mathematical models have been developed to describe it. These models require experimental evidences to be corroborated and, therefore, there is a continuous search for new microscopy and image analysis techniques. In this work, we have used a Canny-edge-detector based technique to automate the generation of hyphal profiles and calculation of morphogenetic parameters such as diameter, elongation rates and hyphoid fitness. The results show that the data obtained with this technique are similar to published data generated with manualbased tracing techniques and that have been carried out on the same species or genus. Thus, we show that application of edge detector-based technique to hyphal growth represents an efficient and accurate method to study hyphal morphogenesis. This represents the first step towards an automated analysis of videomicroscopy images of fungal morphogenesis.La morfogénesis de los hongos es un área de estudio de gran relevancia en la biología celular y en la que se han desarrollado varios modelos matemáticos. Los modelos matemáticos de procesos biológicos precisan de pruebas experimentales que apoyen y corroboren las predicciones teóricas y, por este motivo, existe una búsqueda continua de nuevas técnicas de microscopía y análisis de imágenes para su aplicación en el estudio del crecimiento celular. En este trabajo hemos utilizado una técnica basada en un detector de contornos llamado “Canny-edge-detectorâ€� con el objetivo de automatizar la generación de perfiles de hifas y el cálculo de parámetros morfogenéticos, tales como: el diámetro, la velocidad de elongación y el ajuste con el perfil hifoide, es decir, el perfil teórico de las hifas de los hongos. Los resultados obtenidos son similares a los datos publicados a partir de técnicas manuales de trazado de contornos, generados en la misma especie y género. De esta manera

Video frame processor

International Nuclear Information System (INIS)

Joshi, V.M.; Agashe, Alok; Bairi, B.R.

1993-01-01

This report provides technical description regarding the Video Frame Processor (VFP) developed at Bhabha Atomic Research Centre. The instrument provides capture of video images available in CCIR format. Two memory planes each with a capacity of 512 x 512 x 8 bit data enable storage of two video image frames. The stored image can be processed on-line and on-line image subtraction can also be carried out for image comparisons. The VFP is a PC Add-on board and is I/O mapped within the host IBM PC/AT compatible computer. (author). 9 refs., 4 figs., 19 photographs

Dynamic Video Streaming in Caching-enabled Wireless Mobile Networks

OpenAIRE

Liang, C.; Hu, S.

2017-01-01

Recent advances in software-defined mobile networks (SDMNs), in-network caching, and mobile edge computing (MEC) can have great effects on video services in next generation mobile networks. In this paper, we jointly consider SDMNs, in-network caching, and MEC to enhance the video service in next generation mobile networks. With the objective of maximizing the mean measurement of video quality, an optimization problem is formulated. Due to the coupling of video data rate, computing resource, a...

Automated interpretable computational biology in the clinic: a framework to predict disease severity and stratify patients from clinical data

Directory of Open Access Journals (Sweden)

Soumya Banerjee

2017-10-01

Full Text Available We outline an automated computational and machine learning framework that predicts disease severity and stratifies patients. We apply our framework to available clinical data. Our algorithm automatically generates insights and predicts disease severity with minimal operator intervention. The computational framework presented here can be used to stratify patients, predict disease severity and propose novel biomarkers for disease. Insights from machine learning algorithms coupled with clinical data may help guide therapy, personalize treatment and help clinicians understand the change in disease over time. Computational techniques like these can be used in translational medicine in close collaboration with clinicians and healthcare providers. Our models are also interpretable, allowing clinicians with minimal machine learning experience to engage in model building. This work is a step towards automated machine learning in the clinic.

Decreasing Transition Times in Elementary School Classrooms: Using Computer-Assisted Instruction to Automate Intervention Components

Science.gov (United States)

Hine, Jeffrey F.; Ardoin, Scott P.; Foster, Tori E.

2015-01-01

Research suggests that students spend a substantial amount of time transitioning between classroom activities, which may reduce time spent academically engaged. This study used an ABAB design to evaluate the effects of a computer-assisted intervention that automated intervention components previously shown to decrease transition times. We examined…

Computer-aided detection and automated CT volumetry of pulmonary nodules

International Nuclear Information System (INIS)

Marten, Katharina; Engelke, Christoph

2007-01-01

With use of multislice computed tomography (MSCT), small pulmonary nodules are being detected in vast numbers, constituting the majority of all noncalcified lung nodules. Although the prevalence of lung cancers among such lesions in lung cancer screening populations is low, their isolation may contribute to increased patient survival. Computer-aided diagnosis (CAD) has emerged as a diverse set of diagnostic tools to handle the large number of images in MSCT datasets and most importantly, includes automated detection and volumetry of pulmonary nodules. Current CAD systems can significantly enhance experienced radiologists' performance and outweigh human limitations in identifying small lesions and manually measuring their diameters, augment observer consistency in the interpretation of such examinations and may thus help to detect significantly higher rates of early malignomas and give more precise estimates on chemotherapy response than can radiologists alone. In this review, we give an overview of current CAD in lung nodule detection and volumetry and discuss their relative merits and limitations. (orig.)

A robust computational solution for automated quantification of a specific binding ratio based on [123I]FP-CIT SPECT images

International Nuclear Information System (INIS)

Oliveira, F. P. M.; Tavares, J. M. R. S.; Borges, Faria D.; Campos, Costa D.

2014-01-01

The purpose of the current paper is to present a computational solution to accurately quantify a specific to a non-specific uptake ratio in [ 123 I]fP-CIT single photon emission computed tomography (SPECT) images and simultaneously measure the spatial dimensions of the basal ganglia, also known as basal nuclei. A statistical analysis based on a reference dataset selected by the user is also automatically performed. The quantification of the specific to non-specific uptake ratio here is based on regions of interest defined after the registration of the image under study with a template image. The computational solution was tested on a dataset of 38 [ 123 I]FP-CIT SPECT images: 28 images were from patients with Parkinson’s disease and the remainder from normal patients, and the results of the automated quantification were compared to the ones obtained by three well-known semi-automated quantification methods. The results revealed a high correlation coefficient between the developed automated method and the three semi-automated methods used for comparison (r ≥0.975). The solution also showed good robustness against different positions of the patient, as an almost perfect agreement between the specific to non-specific uptake ratio was found (ICC=1.000). The mean processing time was around 6 seconds per study using a common notebook PC. The solution developed can be useful for clinicians to evaluate [ 123 I]FP-CIT SPECT images due to its accuracy, robustness and speed. Also, the comparison between case studies and the follow-up of patients can be done more accurately and proficiently since the intra- and inter-observer variability of the semi-automated calculation does not exist in automated solutions. The dimensions of the basal ganglia and their automatic comparison with the values of the population selected as reference are also important for professionals in this area.

Video segmentation for post-production

Science.gov (United States)

Wills, Ciaran

2001-12-01

Specialist post-production is an industry that has much to gain from the application of content-based video analysis techniques. However the types of material handled in specialist post-production, such as television commercials, pop music videos and special effects are quite different in nature from the typical broadcast material which many video analysis techniques are designed to work with; shots are short and highly dynamic, and the transitions are often novel or ambiguous. We address the problem of scene change detection and develop a new algorithm which tackles some of the common aspects of post-production material that cause difficulties for past algorithms, such as illumination changes and jump cuts. Operating in the compressed domain on Motion JPEG compressed video, our algorithm detects cuts and fades by analyzing each JPEG macroblock in the context of its temporal and spatial neighbors. Analyzing the DCT coefficients directly we can extract the mean color of a block and an approximate detail level. We can also perform an approximated cross-correlation between two blocks. The algorithm is part of a set of tools being developed to work with an automated asset management system designed specifically for use in post-production facilities.

High-speed automated NDT device for niobium plate using scanning laser acoustic microscopy

International Nuclear Information System (INIS)

Oravecz, M.G.; Yu, B.Y.; Riney, K.; Kessler, L.W.; Padamsee, H.

1988-01-01

This paper presents a nondestructive testing (NDT) device which rapidly and automatically identifies defects throughout the volume of a 23.4 cm x 23.4 cm x 0.3 cm, pure niobium plate using Scanning Laser Acoustic Microscope (SLAM), high-resolution, 60 MHz, ultrasonic images. A principle advantage of the SLAM technique is that it combines a video scan rate with a high scan density (130 lines/mm at 60 MHz). To automate the inspection system they integrated under computer control the following: the SLAM RS-170/330 video output, a computerized XY plate scanner, a real-time video digitizer/integrator, a computer algorithm for defect detection, a digital mass storage device, and a hardcopy output device. The key element was development of an efficient, reliable defect detection algorithm using a variance filter with a locally determined threshold. This algorithm is responsible for recognizing valid flaws in the midst of random texture. This texture was seen throughout the acoustic images and was caused by the niobium microstructure. The images, as analyzed, contained 128 x 120 pixels with 64 grey levels per pixel. This system allows economical inspection of the large quantities (eg. 100 tons) of material needed for future particle accelerators based on microwave superconductivity. Rapid nondestructive inspection of pure niobium sheet is required because current accelerator performance is largely limited by the quality of commercially available material. Previous work documented critical flaws that are detectable by SLAM techniques. 15 references, 9 figures

Distributed Real-Time Embedded Video Processing

National Research Council Canada - National Science Library

Lv, Tiehan

2004-01-01

.... A deployable multi-camera video system must perform distributed computation, including computation near the camera as well as remote computations, in order to meet performance and power requirements...

What hinders teachers in using computer and video games in the classroom? Exploring factors inhibiting the uptake of computer and video games.

Science.gov (United States)

Baek, Young Kyun

2008-12-01

The purpose of this study is to identify factors inhibiting teachers' use of computer and video games in the classroom setting and to examine the degree to which teaching experience and gender affect attitudes toward using games. Six factors that hinder teachers' use of games in the classroom were discovered: Inflexibility of curriculum, Negative effects of gaming, Students' lack of readiness, Lack of supporting materials, Fixed class schedules, and Limited budgets. Lack of supporting material, Fixed class schedules, and Limited budgets were factors that female teachers believed to be more serious obstacles to game use in the classroom than male teachers did. Experienced teachers, more so than inexperienced teachers, believed that adopting games in teaching was hindered by Inflexibility of curriculum and Negative effects of gaming. On the other hand, inexperienced teachers, more so than experienced teachers, believed that adopting games in teaching is less hindered by Lack of supporting materials and Fixed class schedules.

IndigoVision IP video keeps watch over remote gas facilities in Amazon rainforest

Energy Technology Data Exchange (ETDEWEB)

Anon.

2010-07-15

In Brazil, IndigoVision's complete IP video security technology is being used to remotely monitor automated gas facilities in the Amazon rainforest. Twelve compounds containing millions of dollars of process automation, telemetry, and telecom equipment are spread across many thousands of miles of forest and centrally monitored in Rio de Janeiro using Control Center, the company's Security Management software. The security surveillance project uses a hybrid IP network comprising satellite, fibre optic, and wireless links. In addition to advanced compression technology and bandwidth tuning tools, the IP video system uses Activity Controlled Framerate (ACF), which controls the frame rate of the camera video stream based on the amount of motion in a scene. In the absence of activity, the video is streamed at a minimum framerate, but the moment activity is detected the framerate jumps to the configured maximum. This significantly reduces the amount of bandwidth needed. At each remote facility, fixed analog cameras are connected to transmitter nodules that convert the feed to high-quality digital video for transmission over the IP network. The system also integrates alarms with video surveillance. PIR intruder detectors are connected to the system via digital inputs on the transmitters. Advanced alarm-handling features in the Control Center software process the PIR detector alarms and alert operators to potential intrusions. This improves operator efficiency and incident response. 1 fig.

My Activity Coach - using video-coaching to assist a web-based computer-tailored physical activity intervention: a randomised controlled trial protocol.

Science.gov (United States)

Alley, Stephanie; Jennings, Cally; Plotnikoff, Ronald C; Vandelanotte, Corneel

2014-07-21

There is a need for effective population-based physical activity interventions. The internet provides a good platform to deliver physical activity interventions and reach large numbers of people at low cost. Personalised advice in web-based physical activity interventions has shown to improve engagement and behavioural outcomes, though it is unclear if the effectiveness of such interventions may further be improved when providing brief video-based coaching sessions with participants. The purpose of this study is to determine the effectiveness, in terms of engagement, retention, satisfaction and physical activity changes, of a web-based and computer-tailored physical activity intervention with and without the addition of a brief video-based coaching session in comparison to a control group. Participants will be randomly assigned to one of three groups (tailoring + online video-coaching, tailoring-only and wait-list control). The tailoring + video-coaching participants will receive a computer-tailored web-based physical activity intervention ('My Activity Coach') with brief coaching sessions with a physical activity expert over an online video calling program (e.g. Skype). The tailoring-only participants will receive the intervention but not the counselling sessions. The primary time point's for outcome assessment will be immediately post intervention (week 9). The secondary time points will be at 6 and 12 months post-baseline. The primary outcome, physical activity change, will be assessed via the Active Australia Questionnaire (AAQ). Secondary outcome measures include correlates of physical activity (mediators and moderators), quality of life (measured via the SF-12v2), participant satisfaction, engagement (using web-site user statistics) and study retention. Study findings will inform researchers and practitioners about the feasibility and effectiveness of brief online video-coaching sessions in combination with computer-tailored physical activity advice

Automatic summarization of narrative video

NARCIS (Netherlands)

Barbieri, M.

2007-01-01

The amount of digital video content available to users is rapidly increasing. Developments in computer, digital network, and storage technologies all contribute to broaden the offer of digital video. Only users’ attention and time remain scarce resources. Users face the problem of choosing the right

Probabilistic Approaches to Video Retrieval

NARCIS (Netherlands)

Ianeva, Tzvetanka; Boldareva, L.; Westerveld, T.H.W.; Cornacchia, Roberto; Hiemstra, Djoerd; de Vries, A.P.

Our experiments for TRECVID 2004 further investigate the applicability of the so-called “Generative Probabilistic Models to video retrieval��?. TRECVID 2003 results demonstrated that mixture models computed from video shot sequences improve the precision of “query by examples��? results when

Automating the radiographic NDT process

International Nuclear Information System (INIS)

Aman, J.K.

1986-01-01

Automation, the removal of the human element in inspection, has not been generally applied to film radiographic NDT. The justication for automating is not only productivity but also reliability of results. Film remains in the automated system of the future because of its extremely high image content, approximately 8 x 10 9 bits per 14 x 17. The equivalent to 2200 computer floppy discs. Parts handling systems and robotics applied for manufacturing and some NDT modalities, should now be applied to film radiographic NDT systems. Automatic film handling can be achieved with the daylight NDT film handling system. Automatic film processing is becoming the standard in industry and can be coupled to the daylight system. Robots offer the opportunity to automate fully the exposure step. Finally, computer aided interpretation appears on the horizon. A unit which laser scans a 14 x 17 (inch) film in 6 - 8 seconds can digitize film information for further manipulation and possible automatic interrogations (computer aided interpretation). The system called FDRS (for Film Digital Radiography System) is moving toward 50 micron (*approx* 16 lines/mm) resolution. This is believed to meet the need of the majority of image content needs. We expect the automated system to appear first in parts (modules) as certain operations are automated. The future will see it all come together in an automated film radiographic NDT system (author) [pt

Computer and Video Games in Family Life: The Digital Divide as a Resource in Intergenerational Interactions

Science.gov (United States)

Aarsand, Pal Andre

2007-01-01

In this ethnographic study of family life, intergenerational video and computer game activities were videotaped and analysed. Both children and adults invoked the notion of a digital divide, i.e. a generation gap between those who master and do not master digital technology. It is argued that the digital divide was exploited by the children to…

Movie magic in the clinic: computer-generated characters for automated health counseling.

Science.gov (United States)

Bickmore, Timothy

2008-11-06

In this presentation, I demonstrate how many of the technologies used in movie special effects and games have been successfully used in health education and behavior change interventions. Computer-animated health counselors simulate human face-to-face dialogue as a computer interface medium, including not only verbal behavior but nonverbal conversational behavior such as hand gesture, body posture shifts, and facial display of emotion. This technology has now been successfully used in a wide range of health interventions for education and counseling of patients and consumers, including applications in physical activity promotion, medication adherence, and hospital discharge. These automated counselors have been deployed on home computers, hospital-based touch screen kiosks, and mobile devices with integrated health behavior sensing capability. Development of these agents is an interdisciplinary endeavor spanning the fields of character modeling and animation, computational linguistics, artificial intelligence, health communication and behavioral medicine. I will give demonstrations of several fielded systems, describe the technologies and methodologies underlying their development, and present results from five randomized controlled trials that have been completed or are in progress.

Full surface examination of small spheres with a computer controlled scanning electron microscope

International Nuclear Information System (INIS)

Ward, C.M.; Willenborg, D.L.; Montgomery, K.L.

1979-01-01

This report discusses a computer automated stage and Scanning Electron Microscopy (SEM) system for detecting defects in glass spheres for inertial confinement laser fusion experiments. This system detects submicron defects and permits inclusion of acceptable spheres in targets after examination. The stage used to examine and manipulate the spheres through 4π steradians is described. Primary image recording is made on a roster scanning video disc. The need for SEM stability and methods of achieving it are discussed

Video-documentation: 'The Pannonic ozon project'

International Nuclear Information System (INIS)

Loibl, W.; Cabela, E.; Mayer, H. F.; Schmidt, M.

1998-07-01

Goal of the project was the production of a video film as documentation of the Pannonian Ozone Project- POP. The main part of the video describes the POP-model consisting of the modules meteorology, emissions and chemistry, developed during the POP-project. The model considers the European emission patterns of ozone precursors and the actual wind fields. It calculates ozone build up and depletion within air parcels due to emission and weather situation along trajectory routes. Actual ozone concentrations are calculated during model runs simulating the photochemical processes within air parcels moving along 4 day trajectories before reaching the Vienna region. The model computations were validated during extensive ground and aircraft-based measurements of ozone precursors and ozone concentration within the POP study area. Scenario computations were used to determine how much ozone can be reduced in north-eastern Austria by emissions control measures. The video lasts 12:20 minutes and consists of computer animations and life video scenes, presenting the ozone problem in general, the POP model and the model results. The video was produced in co-operation by the Austrian Research Center Seibersdorf - Department of Environmental Planning (ARCS) and Joanneum Research - Institute of Informationsystems (JR). ARCS was responsible for idea, concept, storyboard and text while JR was responsible for computer animation and general video production. The speaker text was written with scientific advice by the POP - project partners: Institute of Meteorology and Physics, University of Agricultural Sciences- Vienna, Environment Agency Austria - Air Quality Department, Austrian Research Center Seibersdorf- Environmental Planning Department/System Research Division. The film was produced as German and English version. (author)

THE DETERMINATION OF THE SHARPNESS DEPTH BORDERS AND CORRESPONDING PHOTOGRAPHY AND VIDEO RECORDING PARAMETERS FOR CONTEMPORARY VIDEO TECHNOLOGY

Directory of Open Access Journals (Sweden)

E. G. Zaytseva

2011-01-01

Full Text Available The method of determination of the sharpness depth borders was improved for contemporary video technology. The computer programme for determination of corresponding video recording parameters was created.

Identifying sports videos using replay, text, and camera motion features

Science.gov (United States)

Kobla, Vikrant; DeMenthon, Daniel; Doermann, David S.

1999-12-01

Automated classification of digital video is emerging as an important piece of the puzzle in the design of content management systems for digital libraries. The ability to classify videos into various classes such as sports, news, movies, or documentaries, increases the efficiency of indexing, browsing, and retrieval of video in large databases. In this paper, we discuss the extraction of features that enable identification of sports videos directly from the compressed domain of MPEG video. These features include detecting the presence of action replays, determining the amount of scene text in vide, and calculating various statistics on camera and/or object motion. The features are derived from the macroblock, motion,and bit-rate information that is readily accessible from MPEG video with very minimal decoding, leading to substantial gains in processing speeds. Full-decoding of selective frames is required only for text analysis. A decision tree classifier built using these features is able to identify sports clips with an accuracy of about 93 percent.

Comparing a Video and Text Version of a Web-Based Computer-Tailored Intervention for Obesity Prevention: A Randomized Controlled Trial.

Science.gov (United States)

Walthouwer, Michel Jean Louis; Oenema, Anke; Lechner, Lilian; de Vries, Hein

2015-10-19

Web-based computer-tailored interventions often suffer from small effect sizes and high drop-out rates, particularly among people with a low level of education. Using videos as a delivery format can possibly improve the effects and attractiveness of these interventions The main aim of this study was to examine the effects of a video and text version of a Web-based computer-tailored obesity prevention intervention on dietary intake, physical activity, and body mass index (BMI) among Dutch adults. A second study aim was to examine differences in appreciation between the video and text version. The final study aim was to examine possible differences in intervention effects and appreciation per educational level. A three-armed randomized controlled trial was conducted with a baseline and 6 months follow-up measurement. The intervention consisted of six sessions, lasting about 15 minutes each. In the video version, the core tailored information was provided by means of videos. In the text version, the same tailored information was provided in text format. Outcome variables were self-reported and included BMI, physical activity, energy intake, and appreciation of the intervention. Multiple imputation was used to replace missing values. The effect analyses were carried out with multiple linear regression analyses and adjusted for confounders. The process evaluation data were analyzed with independent samples t tests. The baseline questionnaire was completed by 1419 participants and the 6 months follow-up measurement by 1015 participants (71.53%). No significant interaction effects of educational level were found on any of the outcome variables. Compared to the control condition, the video version resulted in lower BMI (B=-0.25, P=.049) and lower average daily energy intake from energy-dense food products (B=-175.58, PWeb-based computer-tailored obesity prevention intervention was the most effective intervention and most appreciated. Future research needs to examine if the

Video-game epilepsy: a European study.

Science.gov (United States)

Kasteleijn-Nolst Trenité, D G; da Silva, A M; Ricci, S; Binnie, C D; Rubboli, G; Tassinari, C A; Segers, J P

1999-01-01

With the introduction of Nintendo video-games on a large scale, reports of children having seizures while playing suggested a possible specific, provocative factor. Although 50% of the photosensitive patients are also sensitive to a 50-Hz television, nonphotosensitive patients with a history of video-game seizures were described as well. The question arises whether this is a mere coincidence, provoked by fatigue and stress, is related to the reaction to the television screen itself, or depends on the movement and color of the pictures of this specific game. A European study was performed in four countries and five sites. All patients were selected because of a history of television, video- or computer-game seizures, with a history of sun-light-, discotheque-, or black and white pattern-evoked seizures, or were already known to be sensitive to intermittent photic stimulation. A total of 387 patients were investigated; 220 (75%) were female and 214 (55%) of those were video- or computer-game seizure, were significantly more sensitive to pattern and to the 50-Hz television (chi square, p video- or computer game, 14% proved not to be photosensitive. Although no difference in age or use of medication was found, twice as many men were found in this nonphotosensitive group.

Utilization of KSC Present Broadband Communications Data System for Digital Video Services

Science.gov (United States)

Andrawis, Alfred S.

2002-01-01

This report covers a visibility study of utilizing present KSC broadband communications data system (BCDS) for digital video services. Digital video services include compressed digital TV delivery and video-on-demand. Furthermore, the study examines the possibility of providing interactive video on demand to desktop personal computers via KSC computer network.

Use and Effectiveness of a Video- and Text-Driven Web-Based Computer-Tailored Intervention: Randomized Controlled Trial.

Science.gov (United States)

Walthouwer, Michel Jean Louis; Oenema, Anke; Lechner, Lilian; de Vries, Hein

2015-09-25

Many Web-based computer-tailored interventions are characterized by high dropout rates, which limit their potential impact. This study had 4 aims: (1) examining if the use of a Web-based computer-tailored obesity prevention intervention can be increased by using videos as the delivery format, (2) examining if the delivery of intervention content via participants' preferred delivery format can increase intervention use, (3) examining if intervention effects are moderated by intervention use and matching or mismatching intervention delivery format preference, (4) and identifying which sociodemographic factors and intervention appreciation variables predict intervention use. Data were used from a randomized controlled study into the efficacy of a video and text version of a Web-based computer-tailored obesity prevention intervention consisting of a baseline measurement and a 6-month follow-up measurement. The intervention consisted of 6 weekly sessions and could be used for 3 months. ANCOVAs were conducted to assess differences in use between the video and text version and between participants allocated to a matching and mismatching intervention delivery format. Potential moderation by intervention use and matching/mismatching delivery format on self-reported body mass index (BMI), physical activity, and energy intake was examined using regression analyses with interaction terms. Finally, regression analysis was performed to assess determinants of intervention use. In total, 1419 participants completed the baseline questionnaire (follow-up response=71.53%, 1015/1419). Intervention use declined rapidly over time; the first 2 intervention sessions were completed by approximately half of the participants and only 10.9% (104/956) of the study population completed all 6 sessions of the intervention. There were no significant differences in use between the video and text version. Intervention use was significantly higher among participants who were allocated to an

Generic Challenges and Automation Solutions in Manufacturing SMEs

DEFF Research Database (Denmark)

Grube Hansen, David; Malik, Ali Ahmad; Bilberg, Arne

2017-01-01

Evermore research is conducted on smart manufacturing, digital manufacturing and other aspects of what is expected from the fourth industrial revolution known as Industry 4.0. Most of the research of Industry 4.0 is currently a better fit for large corporations than for SMEs, which in Europe...... of the project, identifies a correlation between the challenges, age and size of the companies. The identified correlation lay ground for an Industry 4.0 light concept, targeting the identified generic challenges of companies employing 10-50 people. The solutions presented are based on cloud computing, Internet...... however represent 98% of the manufacturing industry. In general, SMEs produce high-mix low-volume products, which require a high degree of flexibility. Historically flexibility and automation have been contradictory, but as automation becomes smarter, digitalized and less expensive, this may change which...

Computed Quality Assessment of MPEG4-compressed DICOM Video Data.

Science.gov (United States)

Frankewitsch, Thomas; Söhnlein, Sven; Müller, Marcel; Prokosch, Hans-Ulrich

2005-01-01

Digital Imaging and Communication in Medicine (DICOM) has become one of the most popular standards in medicine. This standard specifies the exact procedures in which digital images are exchanged between devices, either using a network or storage medium. Sources for images vary; therefore there exist definitions for the exchange for CR, CT, NMR, angiography, sonography and so on. With its spreading, with the increasing amount of sources included, data volume is increasing, too. This affects storage and traffic. While for long-time storage data compression is generally not accepted at the moment, there are many situations where data compression is possible: Telemedicine for educational purposes (e.g. students at home using low speed internet connections), presentations with standard-resolution video projectors, or even the supply on wards combined receiving written findings. DICOM comprises compression: for still image there is JPEG, for video MPEG-2 is adopted. Within the last years MPEG-2 has been evolved to MPEG-4, which squeezes data even better, but the risk of significant errors increases, too. Within the last years effects of compression have been analyzed for entertainment movies, but these are not comparable to videos of physical examinations (e.g. echocardiography). In medical videos an individual image plays a more important role. Erroneous single images affect total quality even more. Additionally, the effect of compression can not be generalized from one test series to all videos. The result depends strongly on the source. Some investigations have been presented, where different MPEG-4 algorithms compressed videos have been compared and rated manually. But they describe only the results in an elected testbed. In this paper some methods derived from video rating are presented and discussed for an automatically created quality control for the compression of medical videos, primary stored in DICOM containers.

Datacenter Changes vs. Employment Rates for Datacenter Managers In the Cloud Computing Era

OpenAIRE

Mirzoev, Timur; Benson, Bruce; Hillhouse, David; Lewis, Mickey

2014-01-01

Due to the evolving Cloud Computing paradigm, there is a prevailing concern that in the near future data center managers may be in short supply. Cloud computing, as a whole, is becoming more prevalent into today s computing world. In fact, cloud computing has become so popular that some are now referring to data centers as cloud centers. How does this interest in cloud computing translate into employment rates for data center managers? The popularity of the public and private cloud models are...

Fairness in Paper and Video Resume Screening

NARCIS (Netherlands)

A.M.F. Hiemstra (Annemarie)

2013-01-01

markdownabstract__Abstract__ Recent technological developments have resulted in the introduction of a new type of resume, the video resume, which can be described as a video message in which applicants present themselves to potential employers. Research is struggling to keep pace with the speed

Can Skype be used beyond video calling?

NARCIS (Netherlands)

Exarchakos, G.; Menkovski, V.; Liotta, A.

2011-01-01

Skype nodes generate a substantial part of real-time bi-directional video traffic nowadays. Employing a range of adaptive mechanisms, the application configures video streaming to meet the requirements of the communication and constraints of the underlying network. While other related works focus on

A clinical pilot study of a modular video-CT augmentation system for image-guided skull base surgery

Science.gov (United States)

Liu, Wen P.; Mirota, Daniel J.; Uneri, Ali; Otake, Yoshito; Hager, Gregory; Reh, Douglas D.; Ishii, Masaru; Gallia, Gary L.; Siewerdsen, Jeffrey H.

2012-02-01

Augmentation of endoscopic video with preoperative or intraoperative image data [e.g., planning data and/or anatomical segmentations defined in computed tomography (CT) and magnetic resonance (MR)], can improve navigation, spatial orientation, confidence, and tissue resection in skull base surgery, especially with respect to critical neurovascular structures that may be difficult to visualize in the video scene. This paper presents the engineering and evaluation of a video augmentation system for endoscopic skull base surgery translated to use in a clinical study. Extension of previous research yielded a practical system with a modular design that can be applied to other endoscopic surgeries, including orthopedic, abdominal, and thoracic procedures. A clinical pilot study is underway to assess feasibility and benefit to surgical performance by overlaying CT or MR planning data in realtime, high-definition endoscopic video. Preoperative planning included segmentation of the carotid arteries, optic nerves, and surgical target volume (e.g., tumor). An automated camera calibration process was developed that demonstrates mean re-projection accuracy (0.7+/-0.3) pixels and mean target registration error of (2.3+/-1.5) mm. An IRB-approved clinical study involving fifteen patients undergoing skull base tumor surgery is underway in which each surgery includes the experimental video-CT system deployed in parallel to the standard-of-care (unaugmented) video display. Questionnaires distributed to one neurosurgeon and two otolaryngologists are used to assess primary outcome measures regarding the benefit to surgical confidence in localizing critical structures and targets by means of video overlay during surgical approach, resection, and reconstruction.

Parts-based detection of AK-47s for forensic video analysis

OpenAIRE

Jones, Justin

2010-01-01

Approved for public release; distribution is unlimited Law enforcement, military personnel, and forensic analysts are increasingly reliant on imaging ystems to perform in a hostile environment and require a robust method to efficiently locate bjects of interest in videos and still images. Current approaches require a full-time operator to monitor a surveillance video or to sift a hard drive for suspicious content. In this thesis, we demonstrate the effectiveness of automated analysis tools...

47 CFR 76.1802 - Annual employment report.

Science.gov (United States)

2010-10-01

... gender, race and ethnicity of an employment unit's workforce collected in the annual employment report... 47 Telecommunication 4 2010-10-01 2010-10-01 false Annual employment report. 76.1802 Section 76... MULTICHANNEL VIDEO AND CABLE TELEVISION SERVICE Reports and Filings § 76.1802 Annual employment report. Each...

A computer-controlled automated test system for fatigue and fracture testing

International Nuclear Information System (INIS)

Nanstad, R.K.; Alexander, D.J.; Swain, R.L.; Hutton, J.T.; Thomas, D.L.

1989-01-01

A computer-controlled system consisting of a servohydraulic test machine, an in-house designed test controller, and a desktop computer has been developed for performing automated fracture toughness and fatigue crack growth testing both in the laboratory and in hot cells for remote testing of irradiated specimens. Both unloading compliance and dc-potential drop can be used to monitor crack growth. The test controller includes a dc-current supply programmer, a function generator for driving the servohydraulic test machine to required test outputs, five measurement channels (each consisting of low-pass filter, track/hold amplifier, and 16-bit analog-to-digital converter), and digital logic for various control and data multiplexing functions. The test controller connects to the computer via a 16-bit wide photo-isolated bidirectional bus. The computer, a Hewlett-Packard series 200/300, inputs specimen and test parameters from the operator, configures the test controller, stores test data from the test controller in memory, does preliminary analysis during the test, and records sensor calibrations, specimen and test parameters, and test data on flexible diskette for later recall and analysis with measured initial and final crack length information. During the test, the operator can change test parameters as necessary. 24 refs., 6 figs

Automated spike preparation system for Isotope Dilution Mass Spectrometry (IDMS)

International Nuclear Information System (INIS)

Maxwell, S.L. III; Clark, J.P.

1990-01-01

Isotope Dilution Mass Spectrometry (IDMS) is a method frequently employed to measure dissolved, irradiated nuclear materials. A known quantity of a unique isotope of the element to be measured (referred to as the ''spike'') is added to the solution containing the analyte. The resulting solution is chemically purified then analyzed by mass spectrometry. By measuring the magnitude of the response for each isotope and the response for the ''unique spike'' then relating this to the known quantity of the ''spike'', the quantity of the nuclear material can be determined. An automated spike preparation system was developed at the Savannah River Site (SRS) to dispense spikes for use in IDMS analytical methods. Prior to this development, technicians weighed each individual spike manually to achieve the accuracy required. This procedure was time-consuming and subjected the master stock solution to evaporation. The new system employs a high precision SMI Model 300 Unipump dispenser interfaced with an electronic balance and a portable Epson HX-20 notebook computer to automate spike preparation

Digital video clips for improved pedagogy and illustration of scientific research — with illustrative video clips on atomic spectrometry

Science.gov (United States)

Michel, Robert G.; Cavallari, Jennifer M.; Znamenskaia, Elena; Yang, Karl X.; Sun, Tao; Bent, Gary

1999-12-01

This article is an electronic publication in Spectrochimica Acta Electronica (SAE), a section of Spectrochimica Acta Part B (SAB). The hardcopy text is accompanied by an electronic archive, stored on the CD-ROM accompanying this issue. The archive contains video clips. The main article discusses the scientific aspects of the subject and explains the purpose of the video files. Short, 15-30 s, digital video clips are easily controllable at the computer keyboard, which gives a speaker the ability to show fine details through the use of slow motion. Also, they are easily accessed from the computer hard drive for rapid extemporaneous presentation. In addition, they are easily transferred to the Internet for dissemination. From a pedagogical point of view, the act of making a video clip by a student allows for development of powers of observation, while the availability of the technology to make digital video clips gives a teacher the flexibility to demonstrate scientific concepts that would otherwise have to be done as 'live' demonstrations, with all the likely attendant misadventures. Our experience with digital video clips has been through their use in computer-based presentations by undergraduate and graduate students in analytical chemistry classes, and by high school and middle school teachers and their students in a variety of science and non-science classes. In physics teaching laboratories, we have used the hardware to capture digital video clips of dynamic processes, such as projectiles and pendulums, for later mathematical analysis.

First- and third-party ground truth for key frame extraction from consumer video clips

Science.gov (United States)

Costello, Kathleen; Luo, Jiebo

2007-02-01

Extracting key frames (KF) from video is of great interest in many applications, such as video summary, video organization, video compression, and prints from video. KF extraction is not a new problem. However, current literature has been focused mainly on sports or news video. In the consumer video space, the biggest challenges for key frame selection from consumer videos are the unconstrained content and lack of any preimposed structure. In this study, we conduct ground truth collection of key frames from video clips taken by digital cameras (as opposed to camcorders) using both first- and third-party judges. The goals of this study are: (1) to create a reference database of video clips reasonably representative of the consumer video space; (2) to identify associated key frames by which automated algorithms can be compared and judged for effectiveness; and (3) to uncover the criteria used by both first- and thirdparty human judges so these criteria can influence algorithm design. The findings from these ground truths will be discussed.

Constructing a no-reference H.264/AVC bitstream-based video quality metric using genetic programming-based symbolic regression

OpenAIRE

Staelens, Nicolas; Deschrijver, Dirk; Vladislavleva, E; Vermeulen, Brecht; Dhaene, Tom; Demeester, Piet

2013-01-01

In order to ensure optimal quality of experience toward end users during video streaming, automatic video quality assessment becomes an important field-of-interest to video service providers. Objective video quality metrics try to estimate perceived quality with high accuracy and in an automated manner. In traditional approaches, these metrics model the complex properties of the human visual system. More recently, however, it has been shown that machine learning approaches can also yield comp...

Computer-Assisted Automated Scoring of Polysomnograms Using the Somnolyzer System.

Science.gov (United States)

Punjabi, Naresh M; Shifa, Naima; Dorffner, Georg; Patil, Susheel; Pien, Grace; Aurora, Rashmi N

2015-10-01

Manual scoring of polysomnograms is a time-consuming and tedious process. To expedite the scoring of polysomnograms, several computerized algorithms for automated scoring have been developed. The overarching goal of this study was to determine the validity of the Somnolyzer system, an automated system for scoring polysomnograms. The analysis sample comprised of 97 sleep studies. Each polysomnogram was manually scored by certified technologists from four sleep laboratories and concurrently subjected to automated scoring by the Somnolyzer system. Agreement between manual and automated scoring was examined. Sleep staging and scoring of disordered breathing events was conducted using the 2007 American Academy of Sleep Medicine criteria. Clinical sleep laboratories. A high degree of agreement was noted between manual and automated scoring of the apnea-hypopnea index (AHI). The average correlation between the manually scored AHI across the four clinical sites was 0.92 (95% confidence interval: 0.90-0.93). Similarly, the average correlation between the manual and Somnolyzer-scored AHI values was 0.93 (95% confidence interval: 0.91-0.96). Thus, interscorer correlation between the manually scored results was no different than that derived from manual and automated scoring. Substantial concordance in the arousal index, total sleep time, and sleep efficiency between manual and automated scoring was also observed. In contrast, differences were noted between manually and automated scored percentages of sleep stages N1, N2, and N3. Automated analysis of polysomnograms using the Somnolyzer system provides results that are comparable to manual scoring for commonly used metrics in sleep medicine. Although differences exist between manual versus automated scoring for specific sleep stages, the level of agreement between manual and automated scoring is not significantly different than that between any two human scorers. In light of the burden associated with manual scoring, automated

Automated detection of lung nodules in low-dose computed tomography

International Nuclear Information System (INIS)

Cascio, D.; Cheran, S.C.; Chincarini, A.; De Nunzio, G.; Delogu, P.; Fantacci, M.E.; Gargano, G.; Gori, I.; Retico, A.; Masala, G.L.; Preite Martinez, A.; Santoro, M.; Spinelli, C.; Tarantino, T.

2007-01-01

A computer-aided detection (CAD) system for the identification of pulmonary nodules in low-dose multi-detector computed-tomography (CT) images has been developed in the framework of the MAGIC-5 Italian project. One of the main goals of this project is to build a distributed database of lung CT scans in order to enable automated image analysis through a data and cpu GRID infrastructure. The basic modules of our lung-CAD system, consisting in a 3D dot-enhancement filter for nodule detection and a neural classifier for false-positive finding reduction, are described. The system was designed and tested for both internal and sub-pleural nodules. The database used in this study consists of 17 low-dose CT scans reconstructed with thin slice thickness (∝300 slices/scan). The preliminary results are shown in terms of the FROC analysis reporting a good sensitivity (85% range) for both internal and sub-pleural nodules at an acceptable level of false positive findings (1-9 FP/scan); the sensitivity value remains very high (75% range) even at 1-6 FP/scan. (orig.)

Automation model of sewerage rehabilitation planning.

Science.gov (United States)

Yang, M D; Su, T C

2006-01-01

The major steps of sewerage rehabilitation include inspection of sewerage, assessment of structural conditions, computation of structural condition grades, and determination of rehabilitation methods and materials. Conventionally, sewerage rehabilitation planning relies on experts with professional background that is tedious and time-consuming. This paper proposes an automation model of planning optimal sewerage rehabilitation strategies for the sewer system by integrating image process, clustering technology, optimization, and visualization display. Firstly, image processing techniques, such as wavelet transformation and co-occurrence features extraction, were employed to extract various characteristics of structural failures from CCTV inspection images. Secondly, a classification neural network was established to automatically interpret the structural conditions by comparing the extracted features with the typical failures in a databank. Then, to achieve optimal rehabilitation efficiency, a genetic algorithm was used to determine appropriate rehabilitation methods and substitution materials for the pipe sections with a risk of mal-function and even collapse. Finally, the result from the automation model can be visualized in a geographic information system in which essential information of the sewer system and sewerage rehabilitation plans are graphically displayed. For demonstration, the automation model of optimal sewerage rehabilitation planning was applied to a sewer system in east Taichung, Chinese Taiwan.

A quality assurance framework for the fully automated and objective evaluation of image quality in cone-beam computed tomography

International Nuclear Information System (INIS)

Steiding, Christian; Kolditz, Daniel; Kalender, Willi A.

2014-01-01

Purpose: Thousands of cone-beam computed tomography (CBCT) scanners for vascular, maxillofacial, neurological, and body imaging are in clinical use today, but there is no consensus on uniform acceptance and constancy testing for image quality (IQ) and dose yet. The authors developed a quality assurance (QA) framework for fully automated and time-efficient performance evaluation of these systems. In addition, the dependence of objective Fourier-based IQ metrics on direction and position in 3D volumes was investigated for CBCT. Methods: The authors designed a dedicated QA phantom 10 cm in length consisting of five compartments, each with a diameter of 10 cm, and an optional extension ring 16 cm in diameter. A homogeneous section of water-equivalent material allows measuring CT value accuracy, image noise and uniformity, and multidimensional global and local noise power spectra (NPS). For the quantitative determination of 3D high-contrast spatial resolution, the modulation transfer function (MTF) of centrally and peripherally positioned aluminum spheres was computed from edge profiles. Additional in-plane and axial resolution patterns were used to assess resolution qualitatively. The characterization of low-contrast detectability as well as CT value linearity and artifact behavior was tested by utilizing sections with soft-tissue-equivalent and metallic inserts. For an automated QA procedure, a phantom detection algorithm was implemented. All tests used in the dedicated QA program were initially verified in simulation studies and experimentally confirmed on a clinical dental CBCT system. Results: The automated IQ evaluation of volume data sets of the dental CBCT system was achieved with the proposed phantom requiring only one scan for the determination of all desired parameters. Typically, less than 5 min were needed for phantom set-up, scanning, and data analysis. Quantitative evaluation of system performance over time by comparison to previous examinations was also

A quality assurance framework for the fully automated and objective evaluation of image quality in cone-beam computed tomography.

Science.gov (United States)

Steiding, Christian; Kolditz, Daniel; Kalender, Willi A

2014-03-01

Thousands of cone-beam computed tomography (CBCT) scanners for vascular, maxillofacial, neurological, and body imaging are in clinical use today, but there is no consensus on uniform acceptance and constancy testing for image quality (IQ) and dose yet. The authors developed a quality assurance (QA) framework for fully automated and time-efficient performance evaluation of these systems. In addition, the dependence of objective Fourier-based IQ metrics on direction and position in 3D volumes was investigated for CBCT. The authors designed a dedicated QA phantom 10 cm in length consisting of five compartments, each with a diameter of 10 cm, and an optional extension ring 16 cm in diameter. A homogeneous section of water-equivalent material allows measuring CT value accuracy, image noise and uniformity, and multidimensional global and local noise power spectra (NPS). For the quantitative determination of 3D high-contrast spatial resolution, the modulation transfer function (MTF) of centrally and peripherally positioned aluminum spheres was computed from edge profiles. Additional in-plane and axial resolution patterns were used to assess resolution qualitatively. The characterization of low-contrast detectability as well as CT value linearity and artifact behavior was tested by utilizing sections with soft-tissue-equivalent and metallic inserts. For an automated QA procedure, a phantom detection algorithm was implemented. All tests used in the dedicated QA program were initially verified in simulation studies and experimentally confirmed on a clinical dental CBCT system. The automated IQ evaluation of volume data sets of the dental CBCT system was achieved with the proposed phantom requiring only one scan for the determination of all desired parameters. Typically, less than 5 min were needed for phantom set-up, scanning, and data analysis. Quantitative evaluation of system performance over time by comparison to previous examinations was also verified. The maximum

The Use of Model Matching Video Analysis and Computational Simulation to Study the Ankle Sprain Injury Mechanism

Directory of Open Access Journals (Sweden)

Daniel Tik-Pui Fong

2012-10-01

Full Text Available Lateral ankle sprains continue to be the most common injury sustained by athletes and create an annual healthcare burden of over $4 billion in the U.S. alone. Foot inversion is suspected in these cases, but the mechanism of injury remains unclear. While kinematics and kinetics data are crucial in understanding the injury mechanisms, ligament behaviour measures – such as ligament strains – are viewed as the potential causal factors of ankle sprains. This review article demonstrates a novel methodology that integrates model matching video analyses with computational simulations in order to investigate injury-producing events for a better understanding of such injury mechanisms. In particular, ankle joint kinematics from actual injury incidents were deduced by model matching video analyses and then input into a generic computational model based on rigid bone surfaces and deformable ligaments of the ankle so as to investigate the ligament strains that accompany these sprain injuries. These techniques may have the potential for guiding ankle sprain prevention strategies and targeted rehabilitation therapies.

A distributed substation automation model based on the multi-agents technology; Um modelo distribuido de automacao de subestacoes baseado em tecnologia multiagentes

Energy Technology Data Exchange (ETDEWEB)

Geus, Klaus de; Milsztajn, Flavio; Kolb, Carlos Jose Johann; Dometerco, Jose Henrique; Souza, Alexandre Mendonca de; Braga, Ciro de Carvalho; Parolin, Emerson Luis; Frisch, Arlenio Carneiro; Fortunato Junior, Luiz Kiss; Erzinger Junior, Augusto; Jonack, Marco Antonio; Guiera, Anderson Juliano Azambuja [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil)]. E-mail: klaus@copel.com; flaviomil@copel.com; kolb@copel.com; dometerc@copel.com; alexandre.mendonca@copel.com; ciro@copel.com; parolin@copel.com; arlenio@copel.com; luiz.kiss@copel.com; aerzinger@copel.com; jonack@copel.com; guiera@copel.com

2006-10-15

The main purpose of this paper is to analyse distributed computing technology which can be used in substation automation systems. Based on performance comparative results obtained in laboratory, a specific model for distributed substation automation is proposed considering the current model employed at COPEL - Companhia Paranaense de Energia. The proposed model is based on the multi-agents technology, which has lately received special attention in the development of distributed systems with local intelligence. (author)

Acceptability of the use of cellular telephone and computer pictures/video for "pill counts" in buprenorphine maintenance treatment.

Science.gov (United States)

Welsh, Christopher

2016-01-01

As part of a comprehensive plan to attempt to minimize the diversion of prescribed controlled substances, many professional organization and licensing boards are recommending the use of "pill counts." This study sought to evaluate acceptability of the use of cellular phone and computer pictures/video for "pill counts" by patients in buprenorphine maintenance treatment. Patients prescribed buprenorphine/naloxone were asked a series of questions related to the type(s) of electronic communication to which they had access as well as their willingness to use these for the purpose of performing a "pill/film count." Of the 80 patients, 4 (5 percent) did not have a phone at all. Only 28 (35 percent) had a "smart phone" with some sort of data plan and Internet access. Forty (50 percent) of the patients had a phone with no camera and 10 (12.5 percent) had a phone with a camera but no video capability. All patients said that they would be willing to periodically use the video or camera on their phone or computer to have buprenorphine/naloxone pills or film counted as long as the communication was protected from electronic tampering. With the advent of applications for smart phones that allow for Health Insurance Portability and Accountability Act of 1996-compliant picture/video communication, a number of things can now be done that can enhance patient care as well as reduce the chances of misuse/diversion of prescribed medications. This could be used in settings where a larger proportion of controlled substances are prescribed including medication assisted therapy for opioid use disorders and pain management programs.

Automated Quantification of Stroke Damage on Brain Computed Tomography Scans: e-ASPECTS

Directory of Open Access Journals (Sweden)

James Hampton-Till

2015-08-01

Full Text Available Emergency radiological diagnosis of acute ischaemic stroke requires the accurate detection and appropriate interpretation of relevant imaging findings. Non-contrast computed tomography (CT provides fast and low-cost assessment of the early signs of ischaemia and is the most widely used diagnostic modality for acute stroke. The Alberta Stroke Program Early CT Score (ASPECTS is a quantitative and clinically validated method to measure the extent of ischaemic signs on brain CT scans. The CE-marked electronic-ASPECTS (e-ASPECTS software automates the ASPECTS score. Anglia Ruskin Clinical Trials Unit (ARCTU independently carried out a clinical investigation of the e-ASPECTS software, an automated scoring system which can be integrated into the diagnostic pathway of an acute ischaemic stroke patient, thereby assisting the physician with expert interpretation of the brain CT scan. Here we describe a literature review of the clinical importance of reliable assessment of early ischaemic signs on plain CT scans, and of technologies automating these processed scoring systems in ischaemic stroke on CT scans focusing on the e-ASPECTS software. To be suitable for critical appraisal in this evaluation, the published studies needed a sample size of a minimum of 10 cases. All randomised studies were screened and data deemed relevant to demonstration of performance of ASPECTS were appraised. The literature review focused on three domains: i interpretation of brain CT scans of stroke patients, ii the application of the ASPECTS score in ischaemic stroke, and iii automation of brain CT analysis. Finally, the appraised references are discussed in the context of the clinical impact of e-ASPECTS and the expected performance, which will be independently evaluated by a non-inferiority study conducted by the ARCTU.

Automated image quality assessment for chest CT scans.

Science.gov (United States)

Reeves, Anthony P; Xie, Yiting; Liu, Shuang

2018-02-01

Medical image quality needs to be maintained at standards sufficient for effective clinical reading. Automated computer analytic methods may be applied to medical images for quality assessment. For chest CT scans in a lung cancer screening context, an automated quality assessment method is presented that characterizes image noise and image intensity calibration. This is achieved by image measurements in three automatically segmented homogeneous regions of the scan: external air, trachea lumen air, and descending aorta blood. Profiles of CT scanner behavior are also computed. The method has been evaluated on both phantom and real low-dose chest CT scans and results show that repeatable noise and calibration measures may be realized by automated computer algorithms. Noise and calibration profiles show relevant differences between different scanners and protocols. Automated image quality assessment may be useful for quality control for lung cancer screening and may enable performance improvements to automated computer analysis methods. © 2017 American Association of Physicists in Medicine.

Fundamentals of Library Automation and Technology. Participant Workbook.

Science.gov (United States)

Bridge, Frank; Walton, Robert

This workbook presents outlines of topics to be covered during a two-day workshop on the fundamentals for library automation. Topics for the first day include: (1) Introduction; (2) Computer Technology--A Historical Overview; (3) Evolution of Library Automation; (4) Computer Hardware Technology--An Introduction; (5) Computer Software…

Automated selection of brain regions for real-time fMRI brain-computer interfaces

Science.gov (United States)

Lührs, Michael; Sorger, Bettina; Goebel, Rainer; Esposito, Fabrizio

2017-02-01

Objective. Brain-computer interfaces (BCIs) implemented with real-time functional magnetic resonance imaging (rt-fMRI) use fMRI time-courses from predefined regions of interest (ROIs). To reach best performances, localizer experiments and on-site expert supervision are required for ROI definition. To automate this step, we developed two unsupervised computational techniques based on the general linear model (GLM) and independent component analysis (ICA) of rt-fMRI data, and compared their performances on a communication BCI. Approach. 3 T fMRI data of six volunteers were re-analyzed in simulated real-time. During a localizer run, participants performed three mental tasks following visual cues. During two communication runs, a letter-spelling display guided the subjects to freely encode letters by performing one of the mental tasks with a specific timing. GLM- and ICA-based procedures were used to decode each letter, respectively using compact ROIs and whole-brain distributed spatio-temporal patterns of fMRI activity, automatically defined from subject-specific or group-level maps. Main results. Letter-decoding performances were comparable to supervised methods. In combination with a similarity-based criterion, GLM- and ICA-based approaches successfully decoded more than 80% (average) of the letters. Subject-specific maps yielded optimal performances. Significance. Automated solutions for ROI selection may help accelerating the translation of rt-fMRI BCIs from research to clinical applications.

Concurrent validity of an automated algorithm for computing the center of pressure excursion index (CPEI).

Science.gov (United States)

Diaz, Michelle A; Gibbons, Mandi W; Song, Jinsup; Hillstrom, Howard J; Choe, Kersti H; Pasquale, Maria R

2018-01-01

Center of Pressure Excursion Index (CPEI), a parameter computed from the distribution of plantar pressures during stance phase of barefoot walking, has been used to assess dynamic foot function. The original custom program developed to calculate CPEI required the oversight of a user who could manually correct for certain exceptions to the computational rules. A new fully automatic program has been developed to calculate CPEI with an algorithm that accounts for these exceptions. The purpose of this paper is to compare resulting CPEI values computed by these two programs on plantar pressure data from both asymptomatic and pathologic subjects. If comparable, the new program offers significant benefits-reduced potential for variability due to rater discretion and faster CPEI calculation. CPEI values were calculated from barefoot plantar pressure distributions during comfortable paced walking on 61 healthy asymptomatic adults, 19 diabetic adults with moderate hallux valgus, and 13 adults with mild hallux valgus. Right foot data for each subject was analyzed with linear regression and a Bland-Altman plot. The automated algorithm yielded CPEI values that were linearly related to the original program (R 2 =0.99; Pcomputation methods. Results of this analysis suggest that the new automated algorithm may be used to calculate CPEI on both healthy and pathologic feet. Copyright © 2017 Elsevier B.V. All rights reserved.

Automation of radiation dosimetry using PTW dosemeter and LabVIEWTM

International Nuclear Information System (INIS)

Weiss, C.; Al-Frouh, K.; Anjak, O.

2011-01-01

Automation of UNIDOS 'Dosemeter' using personal computer (PC) is discussed in this paper. In order to save time and eliminate human operation errors during the radiation dosimetry, suitable software, using LabVIEW TM graphical programming language, was written to automate and facilitate the processes of measurements, analysis and data storage. The software calculates the calibration factor of the ionization chamber in terms of air kerma or absorbed dose to water according to IAEA dosimetry protocols. It also has the ability to print a calibration certificate. The obtained results using this software are found to be more reliable and flexible than those obtained by manual methods previously employed. Using LabVIEW TM as a development tool is extremely convenient to make things easier when software modifications and improvements are needed.

Development of performance tests for an automated MC and A system

International Nuclear Information System (INIS)

Kok, K.D.; Klingensmith, R.W.; Riffle, W.; Carver, R.D.; Schumacher, S.S.; Lavender, J.C.; Smith, B.W.

1988-01-01

Performance tests of MC and A systems using computers are described, and some example scenarios are discussed. Facility personnel or an external inspection group may use performance tests to evaluate MC and A capabilities under actual operating conditions. This paper addresses test elements common to both user groups. Performance tests consist of scenario development, security, and safety measures, conduct, and evaluation. Because exercises often test scenarios against which the MC and A system is protecting, they may require additional security and safety measures. Computer systems enhance MC and A by providing greater speed, increased precision, and automated checks. Performance tests for MC and A systems using computers differ from performance tests employing manual data systems in that the scenarios must anticipate computer actions rather than utilize controllers to adjust the scenario

36 CFR 1194.24 - Video and multimedia products.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Video and multimedia products... Video and multimedia products. (a) All analog television displays 13 inches and larger, and computer... training and informational video and multimedia productions which support the agency's mission, regardless...

Test of the Center for Automated Processing of Hardwoods' Auto-Image Detection and Computer-Based Grading and Cutup System

Science.gov (United States)

Philip A. Araman; Janice K. Wiedenbeck

1995-01-01

Automated lumber grading and yield optimization using computer controlled saws will be plausible for hardwoods if and when lumber scanning systems can reliably identify all defects by type. Existing computer programs could then be used to grade the lumber, identify the best cut-up solution, and control the sawing machines. The potential value of a scanning grading...

Deep video deblurring

KAUST Repository

Su, Shuochen

2016-11-25

Motion blur from camera shake is a major problem in videos captured by hand-held devices. Unlike single-image deblurring, video-based approaches can take advantage of the abundant information that exists across neighboring frames. As a result the best performing methods rely on aligning nearby frames. However, aligning images is a computationally expensive and fragile procedure, and methods that aggregate information must therefore be able to identify which regions have been accurately aligned and which have not, a task which requires high level scene understanding. In this work, we introduce a deep learning solution to video deblurring, where a CNN is trained end-to-end to learn how to accumulate information across frames. To train this network, we collected a dataset of real videos recorded with a high framerate camera, which we use to generate synthetic motion blur for supervision. We show that the features learned from this dataset extend to deblurring motion blur that arises due to camera shake in a wide range of videos, and compare the quality of results to a number of other baselines.

Video Game Vision Syndrome: A New Clinical Picture in Children?

Science.gov (United States)

Rechichi, Caterina; De Mojà, Gilda; Aragona, Pasquale

2017-11-01

To examine a possible relationship between exposure to video games/electronic screens and visual issues in children between 3 and 10 years of age. An observational, cross-sectional study of a population of children using video games was employed. All patients between 3 and 10 years of age were recruited at an outpatient unit accredited by the Italian Regional Health Service. Three hundred twenty children (159 boys and 161 girls; mean age = 6.9 ± 2 years) were observed. Ophthalmological examination included assessment of stereoscopic vision on Lang-Stereotests I and II (LANG-STEREOTEST AG, Küsnacht, Switzerland) and identification of the dominant eye using the Dolman method. Furthermore, a questionnaire was used to record asthenopic symptoms and daily exposure to video games and electronic screens. Two groups of children were examined according to the average amount of time spent playing video games daily: children who played video games for less than 30 minutes per day and not every day (control group) and children who played video games for 30 minutes or more every day (video game group). Both groups were then divided into two subgroups: children using other types of electronic screens (eg, televisions, computers, tablets, and smartphones) for less than 3 hours daily (low electronic use subgroup) and children using other types of electronic screens for 3 hours or more per day (high electronic use subgroup). Asthenopia (especially headache, eyelid tic, transient diplopia, and dizziness), absence of fine stereopsis, and refractive errors were statistically more frequent (mainly in the dominant eye) in children in the video game group. These symptoms were frequent and peculiar in the video game group and might be part of a video game vision syndrome that has not been defined yet. It is important to recognize these signs as possible functional disorders to avoid erroneous diagnostic and therapeutic interventions. [J Pediatr Ophthalmol Strabismus. 2017

Boosting youth employment prospects in Tanzania | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

2015-12-16

Dec 16, 2015 ... Return to main page, Addressing the youth employment challenge in Africa. Related links: Youth Employment Promotion a Priority Agenda for Tanzania, The Guardian; Report: National Stakeholders Consultative Workshop on Youth Employment (PDF, 1.74 MB); Watch the workshop video on YouTube ...

Safeguards through secure automated fabrication

International Nuclear Information System (INIS)

DeMerschman, A.W.; Carlson, R.L.

1982-01-01

Westinghouse Hanford Company, a prime contractor for the U.S. Department of Energy, is constructing the Secure Automated Fabrication (SAF) line for fabrication of mixed oxide breeder fuel pins. Fuel processing by automation, which provides a separation of personnel from fuel handling, will provide a means whereby advanced safeguards concepts will be introduced. Remote operations and the inter-tie between the process computer and the safeguards computer are discussed

The use of computers for the performance and analysis of non-destructive testing

International Nuclear Information System (INIS)

Edelmann, X.; Pfister, O.

1988-01-01

Examples of the use of computers in non-destructive testing are related. Ultrasonic testing is especially addressed. The employment of computers means improvements for the user, the possibility of registering the reflector position, storage of test data and help with documentation. The test can be automated. The introduction of expert systems is expected for the future. 8 figs., 12 refs

Computer-Based Video Instruction to Teach Students with Intellectual Disabilities to Verbally Respond to Questions and Make Purchases in Fast Food Restaurants

Science.gov (United States)

Mechling, Linda C.; Pridgen, Leslie S.; Cronin, Beth A.

2005-01-01

Computer-based video instruction (CBVI) was used to teach verbal responses to questions presented by cashiers and purchasing skills in fast food restaurants. A multiple probe design across participants was used to evaluate the effectiveness of CBVI. Instruction occurred through simulations of three fast food restaurants on the computer using video…

The challenge associated with the robust computation of meteor velocities from video and photographic records

Science.gov (United States)

Egal, A.; Gural, P. S.; Vaubaillon, J.; Colas, F.; Thuillot, W.

2017-09-01

The CABERNET project was designed to push the limits for obtaining accurate measurements of meteoroids orbits from photographic and video meteor camera recordings. The discrepancy between the measured and theoretic orbits of these objects heavily depends on the semi-major axis determination, and thus on the reliability of the pre-atmospheric velocity computation. With a spatial resolution of 0.01° per pixel and a temporal resolution of up to 10 ms, CABERNET should be able to provide accurate measurements of velocities and trajectories of meteors. To achieve this, it is necessary to improve the precision of the data reduction processes, and especially the determination of the meteor's velocity. In this work, most of the steps of the velocity computation are thoroughly investigated in order to reduce the uncertainties and error contributions at each stage of the reduction process. The accuracy of the measurement of meteor centroids is established and results in a precision of 0.09 pixels for CABERNET, which corresponds to 3.24‧‧. Several methods to compute the velocity were investigated based on the trajectory determination algorithms described in Ceplecha (1987) and Borovicka (1990), as well as the multi-parameter fitting (MPF) method proposed by Gural (2012). In the case of the MPF, many optimization methods were implemented in order to find the most efficient and robust technique to solve the minimization problem. The entire data reduction process is assessed using simulated meteors, with different geometrical configurations and deceleration behaviors. It is shown that the multi-parameter fitting method proposed by Gural(2012)is the most accurate method to compute the pre-atmospheric velocity in all circumstances. Many techniques that assume constant velocity at the beginning of the path as derived from the trajectory determination using Ceplecha (1987) or Borovicka (1990) can lead to large errors for decelerating meteors. The MPF technique also allows one to

Manned systems utilization analysis (study 2.1). Volume 3: LOVES computer simulations, results, and analyses

Science.gov (United States)

Stricker, L. T.

1975-01-01

The LOVES computer program was employed to analyze the geosynchronous portion of the NASA's 1973 automated satellite mission model from 1980 to 1990. The objectives of the analyses were: (1) to demonstrate the capability of the LOVES code to provide the depth and accuracy of data required to support the analyses; and (2) to tradeoff the concept of space servicing automated satellites composed of replaceable modules against the concept of replacing expendable satellites upon failure. The computer code proved to be an invaluable tool in analyzing the logistic requirements of the various test cases required in the tradeoff. It is indicated that the concept of space servicing offers the potential for substantial savings in the cost of operating automated satellite systems.

BREED: a CDC-7600 computer program for the automation of breeder reactor design analysis (LWBR Development Program)

International Nuclear Information System (INIS)

Candelore, N.R.; Maher, C.M.

1985-03-01

BREED is an executive CDC-7600 program which was developed to facilitate the sequence of calculations and movement of data through a prescribed series of breeder reactor design computer programs in an uninterrupted single-job mode. It provides the capability to interface different application programs into a single computer run to provide a complete design function. The automation that can be achieved as a result of using BREED significantly reduces not only the time required for data preparation and hand transfer of data, but also the time required to complete an iteration of the total design effort. Data processing within a technical discipline and data transfer between technical disciplines can be accommodated. The input/output data processing is achieved with BREED by using a set of simple, easily understood user commands, usually short descriptive words, which the user inserts in his input deck. The input deck completely identifies and controls the calculational sequence needed to produce a desired end product. This report has been prepared to provide instructional material on the use of BREED and its user-oriented procedures to facilitate computer automation of design calculations

Automated Thermal Image Processing for Detection and Classification of Birds and Bats - FY2012 Annual Report

Energy Technology Data Exchange (ETDEWEB)

Duberstein, Corey A.; Matzner, Shari; Cullinan, Valerie I.; Virden, Daniel J.; Myers, Joshua R.; Maxwell, Adam R.

2012-09-01

Surveying wildlife at risk from offshore wind energy development is difficult and expensive. Infrared video can be used to record birds and bats that pass through the camera view, but it is also time consuming and expensive to review video and determine what was recorded. We proposed to conduct algorithm and software development to identify and to differentiate thermally detected targets of interest that would allow automated processing of thermal image data to enumerate birds, bats, and insects. During FY2012 we developed computer code within MATLAB to identify objects recorded in video and extract attribute information that describes the objects recorded. We tested the efficiency of track identification using observer-based counts of tracks within segments of sample video. We examined object attributes, modeled the effects of random variability on attributes, and produced data smoothing techniques to limit random variation within attribute data. We also began drafting and testing methodology to identify objects recorded on video. We also recorded approximately 10 hours of infrared video of various marine birds, passerine birds, and bats near the Pacific Northwest National Laboratory (PNNL) Marine Sciences Laboratory (MSL) at Sequim, Washington. A total of 6 hours of bird video was captured overlooking Sequim Bay over a series of weeks. An additional 2 hours of video of birds was also captured during two weeks overlooking Dungeness Bay within the Strait of Juan de Fuca. Bats and passerine birds (swallows) were also recorded at dusk on the MSL campus during nine evenings. An observer noted the identity of objects viewed through the camera concurrently with recording. These video files will provide the information necessary to produce and test software developed during FY2013. The annotation will also form the basis for creation of a method to reliably identify recorded objects.

Computer automation of a health physics program record

International Nuclear Information System (INIS)

Bird, E.M.; Flook, B.A.; Jarrett, R.D.

1984-01-01

A multi-user computer data base management system (DBMS) has been developed to automate USDA's national radiological safety program. It maintains information on approved users of radioactive material and radiation emanating equipment, as a central file which is accessed whenever information on the user is required. Files of inventory, personnel dosemetry records, laboratory and equipment surveys, leak tests, bioassay reports, and all other information are linked to each approved user by an assigned code that identifies the user by state, agency, and facility. The DBMS is menu-driven with provisions for addition, modification and report generation of information maintained in the system. This DBMS was designed as a single entry system to reduce the redundency of data entry. Prompts guide the user at decision points and data validation routines check for proper data entry. The DBMS generates lists of current inventories, leak test forms, inspection reports, scans for overdue reports from users, and generates follow-up letters. The DBMS system operates on a Wang OIS computer and utilizes its compiled BASIC, List Processing, Word Processing, and indexed (ISAM) file features. This system is a very fast relational database supporting many users simultaneously while providing several methods of data protection. All data files are compatible with List Processing. Information in these files can be examined, sorted, modified, or outputted to word processing documents using software supplied by Wang. This has reduced the need for special one-time programs and provides alternative access to the data

Video Games and Youth Violence: A Prospective Analysis in Adolescents

Science.gov (United States)

Ferguson, Christopher J.

2011-01-01

The potential influence of violent video games on youth violence remains an issue of concern for psychologists, policymakers and the general public. Although several prospective studies of video game violence effects have been conducted, none have employed well validated measures of youth violence, nor considered video game violence effects in…

An advance care plan decision support video before major surgery: a patient- and family-centred approach.

Science.gov (United States)

Isenberg, Sarina R; Crossnohere, Norah L; Patel, Manali I; Conca-Cheng, Alison; Bridges, John F P; Swoboda, Sandy M; Smith, Thomas J; Pawlik, Timothy M; Weiss, Matthew; Volandes, Angelo E; Schuster, Anne; Miller, Judith A; Pastorini, Carolyn; Roter, Debra L; Aslakson, Rebecca A

2018-06-01

Video-based advanc care planning (ACP) tools have been studied in varied medical contexts; however, none have been developed for patients undergoing major surgery. Using a patient- and family-centredness approach, our objective was to implement human-centred design (HCD) to develop an ACP decision support video for patients and their family members when preparing for major surgery. The study investigators partnered with surgical patients and their family members, surgeons and other health professionals to design an ACP decision support video using key HCD principles. Adapting Maguire's HCD stages from computer science to the surgical context, while also incorporating Elwyn et al 's specifications for patient-oriented decision support tool development, we used a six-stage HCD process to develop the video: (1) plan HCD process; (2) specify where video will be used; (3) specify user and organisational requirements; (4) produce and test prototypes; (5) carry out user-based assessment; (6) field test with end users. Over 450 stakeholders were engaged in the development process contributing to setting objectives, applying for funding, providing feedback on the storyboard and iterations of the decision tool video. Throughout the HCD process, stakeholders' opinions were compiled and conflicting approaches negotiated resulting in a tool that addressed stakeholders' concerns. Our patient- and family-centred approach using HCD facilitated discussion and the ability to elicit and balance sometimes competing viewpoints. The early engagement of users and stakeholders throughout the development process may help to ensure tools address the stated needs of these individuals. NCT02489799. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

CS Seminar Videos

OpenAIRE

Ong, Derek; Tona, Glen; Gibb, Kyle; Parbadia, Sivani

2013-01-01

Main site for our project can be found at this URL: http://vtechworks.lib.vt.edu/handle/10919/19036. From here you can find videos of all the CS seminars and distinguished lectures given this semester. Each video has its own abstract and description. The files attached in this section are a final report in both raw Word Document and archival PDF formats and a presentation in both raw Powerpoint and archival PDF formats. Computer Science seminars are a very educational and interesting as...

Comparative analysis of video processing and 3D rendering for cloud video games using different virtualization technologies

Science.gov (United States)

Bada, Adedayo; Alcaraz-Calero, Jose M.; Wang, Qi; Grecos, Christos

2014-05-01

This paper describes a comprehensive empirical performance evaluation of 3D video processing employing the physical/virtual architecture implemented in a cloud environment. Different virtualization technologies, virtual video cards and various 3D benchmarks tools have been utilized in order to analyse the optimal performance in the context of 3D online gaming applications. This study highlights 3D video rendering performance under each type of hypervisors, and other factors including network I/O, disk I/O and memory usage. Comparisons of these factors under well-known virtual display technologies such as VNC, Spice and Virtual 3D adaptors reveal the strengths and weaknesses of the various hypervisors with respect to 3D video rendering and streaming.

Computational Complexity of Some Problems on Generalized Cellular Automations

Directory of Open Access Journals (Sweden)

P. G. Klyucharev

2012-03-01

Full Text Available We prove that the preimage problem of a generalized cellular automation is NP-hard. The results of this work are important for supporting the security of the ciphers based on the cellular automations.

Acquired and Required Competencies in Interactive Computer in Labour Market Sector from the Employers

Science.gov (United States)

Adodo, S. O.; Adewole, Timothy

2013-01-01

This study investigated acquired and required competencies in interactive computer technology (ICT) in labour data were collected from employers' and employees'. The study is a descriptive research of the survey type. The population of the study consisted of unemployed graduates, employed graduates and various parastatal where graduates seek for…

Consumer-based technology for distribution of surgical videos for objective evaluation.

Science.gov (United States)

Gonzalez, Ray; Martinez, Jose M; Lo Menzo, Emanuele; Iglesias, Alberto R; Ro, Charles Y; Madan, Atul K

2012-08-01

The Global Operative Assessment of Laparoscopic Skill (GOALS) is one validated metric utilized to grade laparoscopic skills and has been utilized to score recorded operative videos. To facilitate easier viewing of these recorded videos, we are developing novel techniques to enable surgeons to view these videos. The objective of this study is to determine the feasibility of utilizing widespread current consumer-based technology to assist in distributing appropriate videos for objective evaluation. Videos from residents were recorded via a direct connection from the camera processor via an S-video output via a cable into a hub to connect to a standard laptop computer via a universal serial bus (USB) port. A standard consumer-based video editing program was utilized to capture the video and record in appropriate format. We utilized mp4 format, and depending on the size of the file, the videos were scaled down (compressed), their format changed (using a standard video editing program), or sliced into multiple videos. Standard available consumer-based programs were utilized to convert the video into a more appropriate format for handheld personal digital assistants. In addition, the videos were uploaded to a social networking website and video sharing websites. Recorded cases of laparoscopic cholecystectomy in a porcine model were utilized. Compression was required for all formats. All formats were accessed from home computers, work computers, and iPhones without difficulty. Qualitative analyses by four surgeons demonstrated appropriate quality to grade for these formats. Our preliminary results show promise that, utilizing consumer-based technology, videos can be easily distributed to surgeons to grade via GOALS via various methods. Easy accessibility may help make evaluation of resident videos less complicated and cumbersome.

Joint force protection advanced security system (JFPASS) "the future of force protection: integrate and automate"

Science.gov (United States)

Lama, Carlos E.; Fagan, Joe E.

2009-09-01

The United States Department of Defense (DoD) defines 'force protection' as "preventive measures taken to mitigate hostile actions against DoD personnel (to include family members), resources, facilities, and critical information." Advanced technologies enable significant improvements in automating and distributing situation awareness, optimizing operator time, and improving sustainability, which enhance protection and lower costs. The JFPASS Joint Capability Technology Demonstration (JCTD) demonstrates a force protection environment that combines physical security and Chemical, Biological, Radiological, Nuclear, and Explosive (CBRNE) defense through the application of integrated command and control and data fusion. The JFPASS JCTD provides a layered approach to force protection by integrating traditional sensors used in physical security, such as video cameras, battlefield surveillance radars, unmanned and unattended ground sensors. The optimization of human participation and automation of processes is achieved by employment of unmanned ground vehicles, along with remotely operated lethal and less-than-lethal weapon systems. These capabilities are integrated via a tailorable, user-defined common operational picture display through a data fusion engine operating in the background. The combined systems automate the screening of alarms, manage the information displays, and provide assessment and response measures. The data fusion engine links disparate sensors and systems, and applies tailored logic to focus the assessment of events. It enables timely responses by providing the user with automated and semi-automated decision support tools. The JFPASS JCTD uses standard communication/data exchange protocols, which allow the system to incorporate future sensor technologies or communication networks, while maintaining the ability to communicate with legacy or existing systems.

Is partially automated driving a bad idea? Observations from an on-road study.

Science.gov (United States)

Banks, Victoria A; Eriksson, Alexander; O'Donoghue, Jim; Stanton, Neville A

2018-04-01

The automation of longitudinal and lateral control has enabled drivers to become "hands and feet free" but they are required to remain in an active monitoring state with a requirement to resume manual control if required. This represents the single largest allocation of system function problem with vehicle automation as the literature suggests that humans are notoriously inefficient at completing prolonged monitoring tasks. To further explore whether partially automated driving solutions can appropriately support the driver in completing their new monitoring role, video observations were collected as part of an on-road study using a Tesla Model S being operated in Autopilot mode. A thematic analysis of video data suggests that drivers are not being properly supported in adhering to their new monitoring responsibilities and instead demonstrate behaviour indicative of complacency and over-trust. These attributes may encourage drivers to take more risks whilst out on the road. Copyright © 2017 Elsevier Ltd. All rights reserved.

Automated Groundwater Screening

International Nuclear Information System (INIS)

Taylor, Glenn A.; Collard, Leonard B.

2005-01-01

The Automated Intruder Analysis has been extended to include an Automated Ground Water Screening option. This option screens 825 radionuclides while rigorously applying the National Council on Radiation Protection (NCRP) methodology. An extension to that methodology is presented to give a more realistic screening factor for those radionuclides which have significant daughters. The extension has the promise of reducing the number of radionuclides which must be tracked by the customer. By combining the Automated Intruder Analysis with the Automated Groundwater Screening a consistent set of assumptions and databases is used. A method is proposed to eliminate trigger values by performing rigorous calculation of the screening factor thereby reducing the number of radionuclides sent to further analysis. Using the same problem definitions as in previous groundwater screenings, the automated groundwater screening found one additional nuclide, Ge-68, which failed the screening. It also found that 18 of the 57 radionuclides contained in NCRP Table 3.1 failed the screening. This report describes the automated groundwater screening computer application

Video Games as a Multifaceted Medium: A Review of Quantitative Social Science Research on Video Games and a Typology of Video Game Research Approaches

Directory of Open Access Journals (Sweden)

James D. Ivory

2013-01-01

Full Text Available Although there is a vast and useful body of quantitative social science research dealing with the social role and impact of video games, it is difficult to compare studies dealing with various dimensions of video games because they are informed by different perspectives and assumptions, employ different methodologies, and address different problems. Studies focusing on different social dimensions of video games can produce varied findings about games’ social function that are often difficult to reconcile— or even contradictory. Research is also often categorized by topic area, rendering a comprehensive view of video games’ social role across topic areas difficult. This interpretive review presents a novel typology of four identified approaches that categorize much of the quantitative social science video game research conducted to date: “video games as stimulus,” “video games as avocation,” “video games as skill,” and “video games as social environment.” This typology is useful because it provides an organizational structure within which the large and growing number of studies on video games can be categorized, guiding comparisons between studies on different research topics and aiding a more comprehensive understanding of video games’ social role. Categorizing the different approaches to video game research provides a useful heuristic for those critiquing and expanding that research, as well as an understandable entry point for scholars new to video game research. Further, and perhaps more importantly, the typology indicates when topics should be explored using different approaches than usual to shed new light on the topic areas. Lastly, the typology exposes the conceptual disconnects between the different approaches to video game research, allowing researchers to consider new ways to bridge gaps between the different approaches’ strengths and limitations with novel methods.

REAL TIME SPEED ESTIMATION FROM MONOCULAR VIDEO

Directory of Open Access Journals (Sweden)

M. S. Temiz

2012-07-01

Full Text Available In this paper, detailed studies have been performed for developing a real time system to be used for surveillance of the traffic flow by using monocular video cameras to find speeds of the vehicles for secure travelling are presented. We assume that the studied road segment is planar and straight, the camera is tilted downward a bridge and the length of one line segment in the image is known. In order to estimate the speed of a moving vehicle from a video camera, rectification of video images is performed to eliminate the perspective effects and then the interest region namely the ROI is determined for tracking the vehicles. Velocity vectors of a sufficient number of reference points are identified on the image of the vehicle from each video frame. For this purpose sufficient number of points from the vehicle is selected, and these points must be accurately tracked on at least two successive video frames. In the second step, by using the displacement vectors of the tracked points and passed time, the velocity vectors of those points are computed. Computed velocity vectors are defined in the video image coordinate system and displacement vectors are measured by the means of pixel units. Then the magnitudes of the computed vectors in the image space are transformed to the object space to find the absolute values of these magnitudes. The accuracy of the estimated speed is approximately ±1 – 2 km/h. In order to solve the real time speed estimation problem, the authors have written a software system in C++ programming language. This software system has been used for all of the computations and test applications.

Automated Data Handling And Instrument Control Using Low-Cost Desktop Computers And An IEEE 488 Compatible Version Of The ODETA V.

Science.gov (United States)

van Leunen, J. A. J.; Dreessen, J.

1984-05-01

The result of a measurement of the modulation transfer function is only useful as long as it is accompanied by a complete description of all relevant measuring conditions involved. For this reason it is necessary to file a full description of the relevant measuring conditions together with the results. In earlier times some of our results were rendered useless because some of the relevant measuring conditions were accidentally not written down and were forgotten. This was mainly due to the lack of concensus about which measuring conditions had to be filed together with the result of a measurement. One way to secure uniform and complete archiving of measuring conditions and results is to automate the data handling. An attendent advantage of automation of data handling is that it does away with the time-consuming correction of rough measuring results. The automation of the data handling was accomplished with rather cheap desktop computers, which were powerfull enough, however, to allow us to automate the measurement as well. After automation of the data handling we started with automatic collection of rough measurement data. Step by step we extended the automation by letting the desktop computer control more and more of the measuring set-up. At present the desktop computer controls all the electrical and most of the mechanical measuring conditions. Further it controls and reads the MTF measuring instrument. Focussing and orientation optimization can be fully automatic, semi-automatic or completely manual. MTF measuring results can be collected automatically but they can also be typed in by hand. Due to the automation we are able to implement proper archival of measuring results together with all necessary measuring conditions. The improved measuring efficiency made it possible to increase the number of routine measurements done in the same time period by an order of magnitude. To our surprise the measuring accuracy also improved by a factor of two. This was due to

Forensic analysis of video steganography tools

Directory of Open Access Journals (Sweden)

Thomas Sloan

2015-05-01

Full Text Available Steganography is the art and science of concealing information in such a way that only the sender and intended recipient of a message should be aware of its presence. Digital steganography has been used in the past on a variety of media including executable files, audio, text, games and, notably, images. Additionally, there is increasing research interest towards the use of video as a media for steganography, due to its pervasive nature and diverse embedding capabilities. In this work, we examine the embedding algorithms and other security characteristics of several video steganography tools. We show how all feature basic and severe security weaknesses. This is potentially a very serious threat to the security, privacy and anonymity of their users. It is important to highlight that most steganography users have perfectly legal and ethical reasons to employ it. Some common scenarios would include citizens in oppressive regimes whose freedom of speech is compromised, people trying to avoid massive surveillance or censorship, political activists, whistle blowers, journalists, etc. As a result of our findings, we strongly recommend ceasing any use of these tools, and to remove any contents that may have been hidden, and any carriers stored, exchanged and/or uploaded online. For many of these tools, carrier files will be trivial to detect, potentially compromising any hidden data and the parties involved in the communication. We finish this work by presenting our steganalytic results, that highlight a very poor current state of the art in practical video steganography tools. There is unfortunately a complete lack of secure and publicly available tools, and even commercial tools offer very poor security. We therefore encourage the steganography community to work towards the development of more secure and accessible video steganography tools, and make them available for the general public. The results presented in this work can also be seen as a useful

A comparison between space-time video descriptors

Science.gov (United States)

Costantini, Luca; Capodiferro, Licia; Neri, Alessandro

2013-02-01

The description of space-time patches is a fundamental task in many applications such as video retrieval or classification. Each space-time patch can be described by using a set of orthogonal functions that represent a subspace, for example a sphere or a cylinder, within the patch. In this work, our aim is to investigate the differences between the spherical descriptors and the cylindrical descriptors. In order to compute the descriptors, the 3D spherical and cylindrical Zernike polynomials are employed. This is important because both the functions are based on the same family of polynomials, and only the symmetry is different. Our experimental results show that the cylindrical descriptor outperforms the spherical descriptor. However, the performances of the two descriptors are similar.

Gradual cut detection using low-level vision for digital video

Science.gov (United States)

Lee, Jae-Hyun; Choi, Yeun-Sung; Jang, Ok-bae

1996-09-01

Digital video computing and organization is one of the important issues in multimedia system, signal compression, or database. Video should be segmented into shots to be used for identification and indexing. This approach requires a suitable method to automatically locate cut points in order to separate shot in a video. Automatic cut detection to isolate shots in a video has received considerable attention due to many practical applications; our video database, browsing, authoring system, retrieval and movie. Previous studies are based on a set of difference mechanisms and they measured the content changes between video frames. But they could not detect more special effects which include dissolve, wipe, fade-in, fade-out, and structured flashing. In this paper, a new cut detection method for gradual transition based on computer vision techniques is proposed. And then, experimental results applied to commercial video are presented and evaluated.

Computer-automated neutron activation analysis system

International Nuclear Information System (INIS)

Minor, M.M.; Garcia, S.R.

1983-01-01

An automated delayed neutron counting and instrumental neutron activation analysis system has been developed at Los Alamos National Laboratory's Omega West Reactor (OWR) to analyze samples for uranium and 31 additional elements with a maximum throughput of 400 samples per day. 5 references

Television, computer, and video viewing; physical activity; and upper limb fracture risk in children: a population-based case control study.

Science.gov (United States)

Ma, Deqiong; Jones, Graeme

2003-11-01

The effect of physical activity on upper limb fractures was examined in this population-based case control study with 321 age- and gender-matched pairs. Sports participation increased fracture risk in boys and decreased risk in girls. Television viewing had a deleterious dose response association with wrist and forearm fractures while light physical activity was protective. The aim of this population-based case control study was to examine the association between television, computer, and video viewing; types and levels of physical activity; and upper limb fractures in children 9-16 years of age. A total of 321 fracture cases and 321 randomly selected individually matched controls were studied. Television, computer, and video viewing and types and levels of physical activity were determined by interview-administered questionnaire. Bone strength was assessed by DXA and metacarpal morphometry. In general, sports participation increased total upper limb fracture risk in boys and decreased risk in girls. Gender-specific risk estimates were significantly different for total, contact, noncontact, and high-risk sports participation as well as four individual sports (soccer, cricket, surfing, and swimming). In multivariate analysis, time spent television, computer, and video viewing in both sexes was positively associated with wrist and forearm fracture risk (OR 1.6/category, 95% CI: 1.1-2.2), whereas days involved in light physical activity participation decreased fracture risk (OR 0.8/category, 95% CI: 0.7-1.0). Sports participation increased hand (OR 1.5/sport, 95% CI: 1.1-2.0) and upper arm (OR 29.8/sport, 95% CI: 1.7-535) fracture risk in boys only and decreased wrist and forearm fracture risk in girls only (OR 0.5/sport, 95% CI: 0.3-0.9). Adjustment for bone density and metacarpal morphometry did not alter these associations. There is gender discordance with regard to sports participation and fracture risk in children, which may reflect different approaches to sport

Studying fish near ocean energy devices using underwater video

Energy Technology Data Exchange (ETDEWEB)

Matzner, Shari; Hull, Ryan E.; Harker-Klimes, Genevra EL; Cullinan, Valerie I.

2017-09-18

The effects of energy devices on fish populations are not well-understood, and studying the interactions of fish with tidal and instream turbines is challenging. To address this problem, we have evaluated algorithms to automatically detect fish in underwater video and propose a semi-automated method for ocean and river energy device ecological monitoring. The key contributions of this work are the demonstration of a background subtraction algorithm (ViBE) that detected 87% of human-identified fish events and is suitable for use in a real-time system to reduce data volume, and the demonstration of a statistical model to classify detections as fish or not fish that achieved a correct classification rate of 85% overall and 92% for detections larger than 5 pixels. Specific recommendations for underwater video acquisition to better facilitate automated processing are given. The recommendations will help energy developers put effective monitoring systems in place, and could lead to a standard approach that simplifies the monitoring effort and advances the scientific understanding of the ecological impacts of ocean and river energy devices.

Does Automated Feedback Improve Writing Quality?

Science.gov (United States)

Wilson, Joshua; Olinghouse, Natalie G.; Andrada, Gilbert N.

2014-01-01

The current study examines data from students in grades 4-8 who participated in a statewide computer-based benchmark writing assessment that featured automated essay scoring and automated feedback. We examined whether the use of automated feedback was associated with gains in writing quality across revisions to an essay, and with transfer effects…

Dynamic stability calculations for power grids employing a parallel computer

Energy Technology Data Exchange (ETDEWEB)

Schmidt, K

1982-06-01

The aim of dynamic contingency calculations in power systems is to estimate the effects of assumed disturbances, such as loss of generation. Due to the large dimensions of the problem these simulations require considerable computing time and costs, to the effect that they are at present only used in a planning state but not for routine checks in power control stations. In view of the homogeneity of the problem, where a multitude of equal generator models, having different parameters, are to be integrated simultaneously, the use of a parallel computer looks very attractive. The results of this study employing a prototype parallel computer (SMS 201) are presented. It consists of up to 128 equal microcomputers bus-connected to a control computer. Each of the modules is programmed to simulate a node of the power grid. Generators with their associated control are represented by models of 13 states each. Passive nodes are complemented by 'phantom'-generators, so that the whole power grid is homogenous, thus removing the need for load-flow-iterations. Programming of microcomputers is essentially performed in FORTRAN.

Automated Decision-Making and Big Data: Concerns for People With Mental Illness.

Science.gov (United States)

Monteith, Scott; Glenn, Tasha

2016-12-01

Automated decision-making by computer algorithms based on data from our behaviors is fundamental to the digital economy. Automated decisions impact everyone, occurring routinely in education, employment, health care, credit, and government services. Technologies that generate tracking data, including smartphones, credit cards, websites, social media, and sensors, offer unprecedented benefits. However, people are vulnerable to errors and biases in the underlying data and algorithms, especially those with mental illness. Algorithms based on big data from seemingly unrelated sources may create obstacles to community integration. Voluntary online self-disclosure and constant tracking blur traditional concepts of public versus private data, medical versus non-medical data, and human versus automated decision-making. In contrast to sharing sensitive information with a physician in a confidential relationship, there may be numerous readers of information revealed online; data may be sold repeatedly; used in proprietary algorithms; and are effectively permanent. Technological changes challenge traditional norms affecting privacy and decision-making, and continued discussions on new approaches to provide privacy protections are needed.

Design Principles for Serious Video Games in Mathematics Education: From Theory to Practice

OpenAIRE

Konstantinos Chorianopoulos; Michail Giannakos

2014-01-01

There is growing interest in the employment of serious video games in science education, but there are no clear design principles. After surveying previous work in serious video game design, we highlighted the following design principles: 1) engage the students with narrative (hero, story), 2) employ familiar gameplay mechanics from popular video games, 3) engage students into constructive trial and error game-play and 4) situate collaborative learning. As illustrated examples we designed two...

A computer vision-based automated Figure-8 maze for working memory test in rodents.

Science.gov (United States)

Pedigo, Samuel F; Song, Eun Young; Jung, Min Whan; Kim, Jeansok J

2006-09-30

The benchmark test for prefrontal cortex (PFC)-mediated working memory in rodents is a delayed alternation task utilizing variations of T-maze or Figure-8 maze, which requires the animals to make specific arm entry responses for reward. In this task, however, manual procedures involved in shaping target behavior, imposing delays between trials and delivering rewards can potentially influence the animal's performance on the maze. Here, we report an automated Figure-8 maze which does not necessitate experimenter-subject interaction during shaping, training or testing. This system incorporates a computer vision system for tracking, motorized gates to impose delays, and automated reward delivery. The maze is controlled by custom software that records the animal's location and activates the gates according to the animal's behavior and a control algorithm. The program performs calculations of task accuracy, tracks movement sequence through the maze, and provides other dependent variables (such as running speed, time spent in different maze locations, activity level during delay). Testing in rats indicates that the performance accuracy is inversely proportional to the delay interval, decreases with PFC lesions, and that animals anticipate timing during long delays. Thus, our automated Figure-8 maze is effective at assessing working memory and provides novel behavioral measures in rodents.

Using Video Game-Based Instruction in an EFL Program: Understanding the Power of Video Games in Education

OpenAIRE

Héctor Alejandro Galvis Guerrero

2011-01-01

This small-scale action-research study examines the perceptions of four students in a military academy in Colombia undergoing the processof using a mainstream video game in their EFL classes instead of classic forms of instruction. The video game used served to approach EFL by means of language exploratory activities designed according to the context present in the video game and the course linguistic objectives. This study was conducted on the grounds that computer technology offers the poss...

Music, videos and the risk for CERN

CERN Multimedia

IT Department

2010-01-01

Do you like listening to music while working? What about watching videos during leisure time? Sure this is fun. Having your colleagues participating in this is even more fun. However, this fun is usually not free. There are music and film companies who earn their living from music and videos. Thus, if you want to listen to music or watch films at CERN, make sure that you own the proper rights to do so (and you have the agreement of your supervisor to do this during working hours). Note that these rights are personal: You usually do not have the right to share this music or these videos with third parties without violating copyrights. Therefore, making copyrighted music and videos public, or sharing music and video files as well as other copyrighted material, is forbidden at CERN --- and also outside CERN. It violates the CERN Computing Rules (http://cern.ch/ComputingRules) and it contradicts CERN's Code of Coduct (https://cern.ch/hr-info/codeofconduct.asp) which expects each of us to behave ethically and be ...

Virtual Pinball / Video Arcade games

NARCIS (Netherlands)

1997-01-01

For use in multimedia or other environments, a virtual pinball/video arcade game displays one or more computer-generated runner elements, runner inject elements, and runner interactivity elements. It has a programmed computer for simulating movement of the runner elements. This is interfered with by

Video Chat with Multiple Cameras

OpenAIRE

MacCormick, John

2012-01-01

The dominant paradigm for video chat employs a single camera at each end of the conversation, but some conversations can be greatly enhanced by using multiple cameras at one or both ends. This paper provides the first rigorous investigation of multi-camera video chat, concentrating especially on the ability of users to switch between views at either end of the conversation. A user study of 23 individuals analyzes the advantages and disadvantages of permitting a user to switch between views at...

Proof of Concept of Automated Collision Detection Technology in Rugby Sevens.

Science.gov (United States)

Clarke, Anthea C; Anson, Judith M; Pyne, David B

2017-04-01

Clarke, AC, Anson, JM, and Pyne, DB. Proof of concept of automated collision detection technology in rugby sevens. J Strength Cond Res 31(4): 1116-1120, 2017-Developments in microsensor technology allow for automated detection of collisions in various codes of football, removing the need for time-consuming postprocessing of video footage. However, little research is available on the ability of microsensor technology to be used across various sports or genders. Game video footage was matched with microsensor-detected collisions (GPSports) in one men's (n = 12 players) and one women's (n = 12) rugby sevens match. True-positive, false-positive, and false-negative events between video and microsensor-detected collisions were used to calculate recall (ability to detect a collision) and precision (accurately identify a collision). The precision was similar between the men's and women's rugby sevens game (∼0.72; scale 0.00-1.00); however, the recall in the women's game (0.45) was less than that for the men's game (0.69). This resulted in 45% of collisions for men and 62% of collisions for women being incorrectly labeled. Currently, the automated collision detection system in GPSports microtechnology units has only modest utility in rugby sevens, and it seems that a rugby sevens-specific algorithm is needed. Differences in measures between the men's and women's game may be a result of physical size, and strength, and physicality, as well as technical and tactical factors.

A review of techniques for the identification and measurement of fish in underwater stereo-video image sequences

Science.gov (United States)

Shortis, Mark R.; Ravanbakskh, Mehdi; Shaifat, Faisal; Harvey, Euan S.; Mian, Ajmal; Seager, James W.; Culverhouse, Philip F.; Cline, Danelle E.; Edgington, Duane R.

2013-04-01

Underwater stereo-video measurement systems are used widely for counting and measuring fish in aquaculture, fisheries and conservation management. To determine population counts, spatial or temporal frequencies, and age or weight distributions, snout to fork length measurements are captured from the video sequences, most commonly using a point and click process by a human operator. Current research aims to automate the measurement and counting task in order to improve the efficiency of the process and expand the use of stereo-video systems within marine science. A fully automated process will require the detection and identification of candidates for measurement, followed by the snout to fork length measurement, as well as the counting and tracking of fish. This paper presents a review of the techniques used for the detection, identification, measurement, counting and tracking of fish in underwater stereo-video image sequences, including consideration of the changing body shape. The review will analyse the most commonly used approaches, leading to an evaluation of the techniques most likely to be a general solution to the complete process of detection, identification, measurement, counting and tracking.

Computational intelligence for qualitative coaching diagnostics: Automated assessment of tennis swings to improve performance and safety

OpenAIRE

Bačić, Boris; Hume, Patria

2017-01-01

Coaching technology, wearables and exergames can provide quantitative feedback based on measured activity, but there is little evidence of qualitative feedback to aid technique improvement. To achieve personalised qualitative feedback, we demonstrated a proof-of-concept prototype combining kinesiology and computational intelligence that could help improving tennis swing technique. Three-dimensional tennis motion data were acquired from multi-camera video (22 backhands and 21 forehands, includ...

Automated high speed volume computed tomography for inline quality control

International Nuclear Information System (INIS)

Hanke, R.; Kugel, A.; Troup, P.

2004-01-01

Increasing complexity of innovative products as well as growing requirements on quality and reliability call for more detailed knowledge about internal structures of manufactured components rather by 100 % inspection than just by sampling test. A first-step solution, like radioscopic inline inspection machines, equipped with automated data evaluation software, have become state of the art in the production floor during the last years. However, these machines provide just ordinary two-dimensional information and deliver no volume data e.g. to evaluate exact position or shape of detected defects. One way to solve this problem is the application of X-ray computed tomography (CT). Compared to the performance of the first generation medical scanners (scanning times of many hours), today, modern Volume CT machines for industrial applications need about 5 minutes for a full object scan depending on the object size. Of course, this is still too long to introduce this powerful method into the inline production quality control. In order to gain acceptance, the scanning time including subsequent data evaluation must be decreased significantly and adapted to the manufacturing cycle times. This presentation demonstrates the new technical set up, reconstruction results and the methods for high-speed volume data evaluation of a new fully automated high-speed CT scanner with cycle times below one minute for an object size of less than 15 cm. This will directly create new opportunities in design and construction of more complex objects. (author)

Video games and surgical ability: a literature review.

Science.gov (United States)

Lynch, Jeremy; Aughwane, Paul; Hammond, Toby M

2010-01-01

Surgical training is rapidly evolving because of reduced training hours and the reduction of training opportunities due to patient safety concerns. There is a popular conception that video game usage might be linked to improved operating ability especially those techniques involving endoscopic modalities. If true this might suggest future directions for training. A search was made of the MEDLINE databases for the MeSH term, "Video Games," combined with the terms "Surgical Procedures, Operative," "Endoscopy," "Robotics," "Education," "Learning," "Simulators," "Computer Simulation," "Psychomotor Performance," and "Surgery, Computer-Assisted,"encompassing all journal articles before November 2009. References of articles were searched for further studies. Twelve relevant journal articles were discovered. Video game usage has been studied in relationship to laparoscopic, gastrointestinal endoscopic, endovascular, and robotic surgery. Video game users acquire endoscopic but not robotic techniques quicker, and training on video games appears to improve performance. Copyright (c) 2010 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Segmentation of Pollen Tube Growth Videos Using Dynamic Bi-Modal Fusion and Seam Carving.

Science.gov (United States)

Tambo, Asongu L; Bhanu, Bir

2016-05-01

The growth of pollen tubes is of significant interest in plant cell biology, as it provides an understanding of internal cell dynamics that affect observable structural characteristics such as cell diameter, length, and growth rate. However, these parameters can only be measured in experimental videos if the complete shape of the cell is known. The challenge is to accurately obtain the cell boundary in noisy video images. Usually, these measurements are performed by a scientist who manually draws regions-of-interest on the images displayed on a computer screen. In this paper, a new automated technique is presented for boundary detection by fusing fluorescence and brightfield images, and a new efficient method of obtaining the final cell boundary through the process of Seam Carving is proposed. This approach takes advantage of the nature of the fusion process and also the shape of the pollen tube to efficiently search for the optimal cell boundary. In video segmentation, the first two frames are used to initialize the segmentation process by creating a search space based on a parametric model of the cell shape. Updates to the search space are performed based on the location of past segmentations and a prediction of the next segmentation.Experimental results show comparable accuracy to a previous method, but significant decrease in processing time. This has the potential for real time applications in pollen tube microscopy.

SHIVGAMI : Simplifying tHe titanIc blastx process using aVailable GAthering of coMputational unIts

Directory of Open Access Journals (Sweden)

Naman Mangukia

2017-10-01

Full Text Available Assembling novel genomes from scratch is a never ending process unless and until the homo sapiens cover all the living organisms! On top of that, this denovo approach is employed by RNASeq and Metagenomics analysis. Functional identification of the scaffolds or transcripts from such drafted assemblies is a substantial step routinely employes a well-known BlastX program which facilitates a user to search DNA query against NCBI-Protein (NR:~120Gb database. In spite of having multicore-processing option, blastX is an elongated process for the bulk of lengthy Queryinputs. Tremendous efforts are constantly being applied to solve this problem by increasing computational power, GPU-Based computing, Cloud computing and Hadoop based approach which ultimately requires gigantic cost in terms of money and processing. To address this issue, here we have come up with SHIVGAMI, which automates the entire process using perl and shell scripts, which divide, distribute and process the input FASTA sequences as per the CPU-cores availability amongst the computational units individually. Linux operating system, NR database and blastX program installations are prerequisites for each system.  The beauty of this stand-alone automation program SHIVGAMI is it requires the LAN connection exactly twice: During ‘query distribution’ and at the time of ‘proces completion’. In initial phase, it divides the fasta sequences according to the individual computer's core-capability. Then it will evenly distribute all the data along with small automation scripts which will run the blastX process to the respective computational unit and send back the results file to the master computer. The master computer finally combines and compiles the files into a single result. This simple automation converts a computer lab into a GRID without investment of any software, hardware and man-power. In short, SHIVGAMI is a time and cost savior tool for all users starting from commercial firm

Streaming Audio and Video: New Challenges and Opportunities for Museums.

Science.gov (United States)

Spadaccini, Jim

Streaming audio and video present new challenges and opportunities for museums. Streaming media is easier to author and deliver to Internet audiences than ever before; digital video editing is commonplace now that the tools--computers, digital video cameras, and hard drives--are so affordable; the cost of serving video files across the Internet…

26 CFR 1.1402(f)-1 - Computation of partner's net earnings from self-employment for taxable year which ends as result...

Science.gov (United States)

2010-04-01

... TAXES Tax on Self-Employment Income § 1.1402(f)-1 Computation of partner's net earnings from self...—(1) In general. The rules for the computation of a partner's net earnings from self-employment are... self-employment computed under such rules for the last taxable year of a deceased partner, if a partner...

Expectations of Competency: The Mismatch between Employers' and Graduates' Views of End-User Computing Skills Requirements in the Workplace

Science.gov (United States)

Gibbs, Shirley; Steel, Gary; Kuiper, Alison

2011-01-01

The use of computers has become part of everyday life. The high prevalence of computer use appears to lead employers to assume that university graduates will have the good computing skills necessary in many graduate level jobs. This study investigates how well the expectations of employers match the perceptions of near-graduate students about the…

Home exercise programmes supported by video and automated reminders compared with standard paper-based home exercise programmes in patients with stroke: a randomized controlled trial.

Science.gov (United States)

Emmerson, Kellie B; Harding, Katherine E; Taylor, Nicholas F

2017-08-01

To determine whether patients with stroke receiving rehabilitation for upper limb deficits using smart technology (video and reminder functions) demonstrate greater adherence to prescribed home exercise programmes and better functional outcomes when compared with traditional paper-based exercise prescription. Randomized controlled trial comparing upper limb home exercise programmes supported by video and automated reminders on smart technology, with standard paper-based home exercise programmes. A community rehabilitation programme within a large metropolitan health service. Patients with stroke with upper limb deficits, referred for outpatient rehabilitation. Participants were randomly assigned to the control (paper-based home exercise programme) or intervention group (home exercise programme filmed on an electronic tablet, with an automated reminder). Both groups completed their prescribed home exercise programme for four weeks. The primary outcome was adherence using a self-reported log book. Secondary outcomes were change in upper limb function and patient satisfaction. A total of 62 participants were allocated to the intervention ( n = 30) and control groups ( n = 32). There were no differences between the groups for measures of adherence (mean difference 2%, 95% CI -12 to 17) or change in the Wolf Motor Function Test log transformed time (mean difference 0.02 seconds, 95% CI -0.1 to 0.1). There were no between-group differences in how participants found instructions ( p = 0.452), whether they remembered to do their exercises ( p = 0.485), or whether they enjoyed doing their exercises ( p = 0.864). The use of smart technology was not superior to standard paper-based home exercise programmes for patients recovering from stroke. This trial design was registered prospectively with the Australian and New Zealand Clinical Trials Register, ID: ACTRN 12613000786796. http://www.anzctr.org.au/trialSearch.aspx.

An overview of the Environmental Monitoring Computer Automation Project

International Nuclear Information System (INIS)

Johnson, S.M.; Lorenz, R.

1992-01-01

The Savannah River Site (SRS) was bulk to produce plutonium and tritium for national defense. As a result of site operations, routine and accidental releases of radionuclides have occurred. The effects these releases have on the k>cal population and environment are of concern to the Department of Energy (DOE) and SRS personnel. Each year, approximately 40,000 environmental samples are collected. The quality of the samples, analytical methods and results obtained are important to site personnel. The Environmental Monitoring Computer Automation Project (EMCAP) was developed to better manage scheduling, log-in, tracking, analytical results, and report generation. EMCAP can be viewed as a custom Laboratory Information Management System (LIMS) with the ability to schedule samples, generate reports, and query data. The purpose of this paper is to give an overview of the SRS environmental monitoring program, describe the development of EMCAP software and hardware, discuss the different software modules, show how EMCAP improved the Environmental Monitoring Section program, and examine the future of EMCAP at SRS

Damage Control Automation for Reduced Manning (DC-ARM) Supervisory Control System Software Summary

National Research Council Canada - National Science Library

Downs, Ryan

2002-01-01

.... The SCS currently interfaces and controls the ship's automated fire main, outfitted with smart valves, a high-pressure water mist system, a video over IP system, a door position indication system...

Automated High-Speed Video Detection of Small-Scale Explosives Testing

Science.gov (United States)

Ford, Robert; Guymon, Clint

2013-06-01

Small-scale explosives sensitivity test data is used to evaluate hazards of processing, handling, transportation, and storage of energetic materials. Accurate test data is critical to implementation of engineering and administrative controls for personnel safety and asset protection. Operator mischaracterization of reactions during testing contributes to either excessive or inadequate safety protocols. Use of equipment and associated algorithms to aid the operator in reaction determination can significantly reduce operator error. Safety Management Services, Inc. has developed an algorithm to evaluate high-speed video images of sparks from an ESD (Electrostatic Discharge) machine to automatically determine whether or not a reaction has taken place. The algorithm with the high-speed camera is termed GoDetect (patent pending). An operator assisted version for friction and impact testing has also been developed where software is used to quickly process and store video of sensitivity testing. We have used this method for sensitivity testing with multiple pieces of equipment. We present the fundamentals of GoDetect and compare it to other methods used for reaction detection.

MATIN: a random network coding based framework for high quality peer-to-peer live video streaming.

Science.gov (United States)

Barekatain, Behrang; Khezrimotlagh, Dariush; Aizaini Maarof, Mohd; Ghaeini, Hamid Reza; Salleh, Shaharuddin; Quintana, Alfonso Ariza; Akbari, Behzad; Cabrera, Alicia Triviño

2013-01-01

In recent years, Random Network Coding (RNC) has emerged as a promising solution for efficient Peer-to-Peer (P2P) video multicasting over the Internet. This probably refers to this fact that RNC noticeably increases the error resiliency and throughput of the network. However, high transmission overhead arising from sending large coefficients vector as header has been the most important challenge of the RNC. Moreover, due to employing the Gauss-Jordan elimination method, considerable computational complexity can be imposed on peers in decoding the encoded blocks and checking linear dependency among the coefficients vectors. In order to address these challenges, this study introduces MATIN which is a random network coding based framework for efficient P2P video streaming. The MATIN includes a novel coefficients matrix generation method so that there is no linear dependency in the generated coefficients matrix. Using the proposed framework, each peer encapsulates one instead of n coefficients entries into the generated encoded packet which results in very low transmission overhead. It is also possible to obtain the inverted coefficients matrix using a bit number of simple arithmetic operations. In this regard, peers sustain very low computational complexities. As a result, the MATIN permits random network coding to be more efficient in P2P video streaming systems. The results obtained from simulation using OMNET++ show that it substantially outperforms the RNC which uses the Gauss-Jordan elimination method by providing better video quality on peers in terms of the four important performance metrics including video distortion, dependency distortion, End-to-End delay and Initial Startup delay.

A software oscilloscope for DOS computers with an integrated remote control for a video tape recorder. The assignment of acoustic events to behavioural observations.

Science.gov (United States)

Höller, P

1995-12-01

With only a little knowledge of programming IBM compatible computers in Basic, it is possible to create a digital software oscilloscope with sampling rates up to 17 kHz (depending on the CPU- and bus-speed). The only additional hardware requirement is a common sound card compatible with the Soundblaster. The system presented in this paper is built to analyse the direction a flying bat is facing during sound emission. For this reason the system works with some additional hardware devices, in order to monitor video sequences at the computer screen, overlaid by an online oscillogram. Using an RS232-interface for a Panasonic video tape recorder both the oscillogram and the video tape recorder can be controlled simultaneously and moreover be analysed frame by frame. Not only acoustical events, but also APs, myograms, EEGs and other physiological data can be digitized and analysed in combination with the behavioural data of an experimental subject.

"SmartMonitor"--an intelligent security system for the protection of individuals and small properties with the possibility of home automation.

Science.gov (United States)

Frejlichowski, Dariusz; Gościewska, Katarzyna; Forczmański, Paweł; Hofman, Radosław

2014-06-05

"SmartMonitor" is an intelligent security system based on image analysis that combines the advantages of alarm, video surveillance and home automation systems. The system is a complete solution that automatically reacts to every learned situation in a pre-specified way and has various applications, e.g., home and surrounding protection against unauthorized intrusion, crime detection or supervision over ill persons. The software is based on well-known and proven methods and algorithms for visual content analysis (VCA) that were appropriately modified and adopted to fit specific needs and create a video processing model which consists of foreground region detection and localization, candidate object extraction, object classification and tracking. In this paper, the "SmartMonitor" system is presented along with its architecture, employed methods and algorithms, and object analysis approach. Some experimental results on system operation are also provided. In the paper, focus is put on one of the aforementioned functionalities of the system, namely supervision over ill persons.

Automated estimation of defects in magnetographic defectoscopy. 1. Automated magnetographic flow detectors

International Nuclear Information System (INIS)

Mikhajlov, S.P.; Vaulin, S.L.; Shcherbinin, V.E.; Shur, M.L.

1993-01-01

Consideration is given to specific features and possible functions of equipment for automated estimation of stretched continuity defects for samples with plane surface in magnetographic defectoscopy are discussed. Two models of automated magnetographic flow detectors, those with built-in microcomputer and in the form computer attachment, are described. Directions of further researches and development are discussed. 35 refs., 6 figs

Real-time unmanned aircraft systems surveillance video mosaicking using GPU

Science.gov (United States)

Camargo, Aldo; Anderson, Kyle; Wang, Yi; Schultz, Richard R.; Fevig, Ronald A.

2010-04-01

Digital video mosaicking from Unmanned Aircraft Systems (UAS) is being used for many military and civilian applications, including surveillance, target recognition, border protection, forest fire monitoring, traffic control on highways, monitoring of transmission lines, among others. Additionally, NASA is using digital video mosaicking to explore the moon and planets such as Mars. In order to compute a "good" mosaic from video captured by a UAS, the algorithm must deal with motion blur, frame-to-frame jitter associated with an imperfectly stabilized platform, perspective changes as the camera tilts in flight, as well as a number of other factors. The most suitable algorithms use SIFT (Scale-Invariant Feature Transform) to detect the features consistent between video frames. Utilizing these features, the next step is to estimate the homography between two consecutives video frames, perform warping to properly register the image data, and finally blend the video frames resulting in a seamless video mosaick. All this processing takes a great deal of resources of resources from the CPU, so it is almost impossible to compute a real time video mosaic on a single processor. Modern graphics processing units (GPUs) offer computational performance that far exceeds current CPU technology, allowing for real-time operation. This paper presents the development of a GPU-accelerated digital video mosaicking implementation and compares it with CPU performance. Our tests are based on two sets of real video captured by a small UAS aircraft; one video comes from Infrared (IR) and Electro-Optical (EO) cameras. Our results show that we can obtain a speed-up of more than 50 times using GPU technology, so real-time operation at a video capture of 30 frames per second is feasible.

Automated computation of femoral angles in dogs from three-dimensional computed tomography reconstructions: Comparison with manual techniques.