WorldWideScience

Sample records for emissions reduction potential

  1. Emission Reduction Potential with the Renewal of the Vehicle Fleet in Croatia

    International Nuclear Information System (INIS)

    Zidov, B.; Brlek, G.; Brajkovic, J.; Karan, M.

    2015-01-01

    The European Union has identified the typical areas of application of measures to tackle the problem of pollutants emissions into the air. Road transport is recognized as the largest polluter of the environment and an increase in CO2 emissions is most difficult to suppress in this type of transport. Looking at the projected trend of emission reductions in Croatia, it is clear that for achieving the minimum targets by 2050, as proposed by the European Union, implementation of the very strong measures in the coming period will be inevitable. The main aim of the paper refers to the analysis of potential emission reduction of pollutants generated by passenger vehicles registered in Croatia, assuming the implementation of measures that will result in technological renewal of the fleet at the national level. Generally considering, passenger cars before the Euro 1 standard, Euro 1 and Euro 2 standards together emit nearly 40 percent of all CO2 emissions generated by passenger cars registered in Croatia. Assuming replacement of all cars up to and including Euro 2, with Euro 6 vehicles, and taking into account certain assumptions, the potential reductions in emissions of NOx, CO, CH4 and particles were quantified. The potential reduction in NOx emissions is approximately 3,061 tons, in CO emissions approximately 14482 tons, in CH4 approximately 114 tons and in particulate matter approximately 257 tons. Depending on the engine size, with the replacement of the typical gasoline 20 years old passenger vehicle with the new one, without changing the driving mode, annual savings of up to 209 liters of gasoline fuel and reduction of CO2 emissions by 475 kg could be achieved (according to the assumptions described in the paper). With the replacement of diesel vehicles under the same conditions, the savings of up to 311 liters of diesel fuel annually and reduction of CO2 emissions by 815 kg could be achieved. (author).

  2. Potential energy savings and CO2 emissions reduction of China's cement industry

    International Nuclear Information System (INIS)

    Ke, Jing; Zheng, Nina; Fridley, David; Price, Lynn; Zhou, Nan

    2012-01-01

    This study analyzes current energy and carbon dioxide (CO 2 ) emission trends in China's cement industry as the basis for modeling different levels of cement production and rates of efficiency improvement and carbon reduction in 2011–2030. Three cement output projections are developed based on analyses of historical production and physical and macroeconomic drivers. For each of these three production projections, energy savings and CO 2 emission reduction potentials are estimated in a best practice scenario and two continuous improvement scenarios relative to a frozen scenario. The results reveal the potential for cumulative final energy savings of 27.1 to 37.5 exajoules and energy-related direct emission reductions of 3.2 to 4.4 gigatonnes in 2011–2030 under the best practice scenarios. The continuous improvement scenarios produce cumulative final energy savings of 6.0 to 18.9 exajoules and reduce CO 2 emissions by 1.0 to 2.4 gigatonnes. This analysis highlights that increasing energy efficiency is the most important policy measure for reducing the cement industry's energy and emissions intensity, given the current state of the industry and the unlikelihood of significant carbon capture and storage before 2030. In addition, policies to reduce total cement production offer the most direct way of reducing total energy consumption and CO 2 emissions. - Highlights: ► This study models output and efficiency improvements in Chinese cement industry from 2011–2030. ► Energy savings and CO 2 emission reductions estimated for 3 scenarios relative to frozen scenario. ► Results reveal cumulative final energy savings potential of 27.1–37.5 EJ and 3.2–4.4 Gt CO 2 reductions. ► Increasing efficiency is the most important policy for reducing cement energy and emissions intensity.

  3. Greenhouse gas emission reduction by means of fuel switching in electricity generation: Addressing the potentials

    International Nuclear Information System (INIS)

    Delarue, Erik; D'haeseleer, William

    2008-01-01

    Many countries committed themselves in the Kyoto protocol to reduce greenhouse gas (GHG) emissions. Some of these targeted emission reductions could result from a switch from coal-fired to gas-fired electricity generation. The focus in this work lies on Western Europe, with the presence of the European Union Emission Trading Scheme (EU ETS). For the switching to occur, several conditions have to be fulfilled. First, an economical incentive must be present, i.e. a sufficiently high European Union Allowance (EUA) price together with a sufficiently low natural gas price. Second, the physical potential for switching must exist, i.e. at a given load, there must remain enough power plants not running to make switching possible. This paper investigates what possibilities exist for switching coal-fired plants for gas-fired plants, dependent on the load level (the latter condition above). A fixed allowance cost and a variable natural gas price are assumed. The method to address GHG emission reduction potentials is first illustrated in a methodological case. Next, the GHG emission reduction potentials are addressed for several Western European countries together with a relative positioning of their electricity generation. GHG emission reduction potentials are also compared with simulation results. GHG emission reduction potentials tend to be significant. The Netherlands have a very widespread switching zone, so GHG emission reduction is practically independent of electricity generation. Other counties, like Germany, Spain and Italy could reduce GHG emissions significantly by switching. With an allowance cost following the switch level of a 50% efficient gas-fired plant and a 40% efficient coal-fired plant in the summer season (like in 2005), the global GHG emission reduction (in the electricity generating sector) for the eight modeled zones could amount to 19%

  4. CO2 emissions and reduction potential in China's chemical industry

    International Nuclear Information System (INIS)

    Zhu, Bing; Zhou, Wenji; Hu, Shanying; Li, Qiang; Griffy-Brown, Charla; Jin, Yong

    2010-01-01

    GHG (Increasing greenhouse gas) emissions in China imposes enormous pressure on China's government and society. The increasing GHG trend is primarily driven by the fast expansion of high energy-intensive sectors including the chemical industry. This study investigates energy consumption and CO 2 emissions in the processes of chemical production in China through calculating the amounts of CO 2 emissions and estimating the reduction potential in the near future. The research is based on a two-level perspective which treats the entire industry as Level one and six key sub-sectors as Level two, including coal-based ammonia, calcium carbide, caustic soda, coal-based methanol, sodium carbonate, and yellow phosphorus. These two levels are used in order to address the complexity caused by the fact that there are more than 40 thousand chemical products in this industry and the performance levels of the technologies employed are extremely uneven. Three scenarios with different technological improvements are defined to estimate the emissions of the six sub-sectors and analyze the implied reduction potential in the near future. The results highlight the pivotal role that regulation and policy administration could play in controlling the CO 2 emissions by promoting average technology performances in this industry.

  5. Potential for the reduction of greenhouse gas emissions through the use of mobility services

    DEFF Research Database (Denmark)

    Grischkat, Sylvie; Hunecke, Marcel; Böhler, Susanne

    2014-01-01

    gas emissions per person and year was found to be 78 kg in an optimistic scenario and 25 kg in a pessimistic scenario. Extrapolated to the German metropolitan population, behaviour-related measures alone could result in a 1.8 million ton (optimistic scenario) or 0.6 million ton (pessimistic scenario......This study evaluates potential for the reduction of greenhouse gas emissions in the passenger transport sector achievable through the use of mobility services. Beside car-sharing and -pooling, six services targeted at improving and encouraging the use of urban public transportation were considered......) reduction of greenhouse gas emissions, respectively. In order to exploit this potential fully, however, target group specific information should be obtained and communication strategies developed, as addressed in this paper. This study further presents the limitation of reduction potential quantification...

  6. Potential for greenhouse gas emission reductions using surplus electricity in hydrogen, methane and methanol production via electrolysis

    International Nuclear Information System (INIS)

    Uusitalo, Ville; Väisänen, Sanni; Inkeri, Eero; Soukka, Risto

    2017-01-01

    Highlights: • Greenhouse gas emission reductions using power-to-x processes are studied using life cycle assessment. • Surplus electricity use led to greenhouse gas emission reductions in all studied cases. • Highest reductions can be achieved by using hydrogen to replace fossil based hydrogen. • High reductions are also achieved when fossil transportation fuels are replaced. - Abstract: Using a life cycle perspective, potentials for greenhouse gas emission reductions using various power-to-x processes via electrolysis have been compared. Because of increasing renewable electricity production, occasionally surplus renewable electricity is produced, which leads to situations where the price of electricity approach zero. This surplus electricity can be used in hydrogen, methane and methanol production via electrolysis and other additional processes. Life cycle assessments have been utilized to compare these options in terms of greenhouse gas emission reductions. All of the power-to-x options studied lead to greenhouse gas emission reductions as compared to conventional production processes based on fossil fuels. The highest greenhouse gas emission reductions can be gained when hydrogen from steam reforming is replaced by hydrogen from the power-to-x process. High greenhouse gas emission reductions can also be achieved when power-to-x products are utilized as an energy source for transportation, replacing fossil transportation fuels. A third option with high greenhouse gas emission reduction potential is methane production, storing and electricity conversion in gas engines during peak consumption hours. It is concluded that the power-to-x processes provide a good potential solution for reducing greenhouse gas emissions in various sectors.

  7. Urban passenger transport energy saving and emission reduction potential: A case study for Tianjin, China

    International Nuclear Information System (INIS)

    Peng, Binbin; Du, Huibin; Ma, Shoufeng; Fan, Ying; Broadstock, David C.

    2015-01-01

    Highlights: • Potential to reduce urban passenger transport is projected between 2010 and 2040. • Four scenarios reflecting different policy mixes are considered. • The potential for energy conservation and emission reductions are obtained. • Vehicle population regulation is most effective in energy saving and reducing overall GHG. • Emission standards are the most effective measure to reduce pollutant emissions. - Abstract: With rapid growth of the vehicle population, urban passenger transport in China is largely responsible for increases in energy consumption, greenhouse gas (GHG) emissions, and also atmospheric pollutants (NO x , CO, HC, PM). In this paper, we first develop an urban passenger transport energy saving and emission reduction potential evaluation model using the “Long Range Energy Alternatives Planning (LEAP)” tool; and then take Tianjin city as an empirical case to evaluate the reduction potential of final energy consumption, GHG emissions and pollutants emissions of Tianjin’s urban passenger transport sector between 2010 and 2040 under four scenarios, i.e. BAU (business as usual) scenario, PP (the 12th five-year plan policy) scenario, CP (comprehensive policy) scenario and HP (hybrid policy of PP and CP) scenario. The results show that due to the public transport promotion, energy consumption and CO 2 emissions in 2040 can be reduced by 22% and 22.6% in the PP scenario, compared to BAU. The largest reductions in energy consumption, CO 2 and atmospheric pollutants emissions can be achieved under CP scenario, in which vehicle population regulation is the most effective to be implemented. Emissions standard regulation is the most effective measure to reduce atmospheric pollutant emissions in all the scenarios and green energy promotion is especially effective to reduce NO x and PM

  8. Reduction of emissions from Brazilian cattle raising and the generation of energy: Intensification and confinement potentials

    International Nuclear Information System (INIS)

    Palermo, Giuseppe Cernicchiaro; D'Avignon, Alexandre Louis de Almeida; Freitas, Marcos Aurélio Vasconcelos

    2014-01-01

    The identification of the main sources of anthropic greenhouse gas emissions (GHG) associated with the mitigation and removal of these emissions has become an important instrument in the attenuation of the climatic changes predicted by the IPCC. The largest emission source in Brazil is forest conversion. This land use change has always had a strong relationship with the expansion of agriculture, an activity of great importance in the country, which has the largest commercial cattle herd in the planet. Following the considerable reduction in emissions from deforestation, agriculture has been since 2010 the most important source (MCTI (Ministério da Ciência, Tecnologia e Inovação), 2013. Brasília: Ministério daCiência, Tecnologia e Inovação, Brasil). Seeking to discover the possibilities of altering the emissions profile in the agricultural sector, four scenarios were developed related to how this is dealt with in the beef cattle sector, calculating the potential removal of carbon from the atmosphere through natural regeneration of biomes. The results suggest that picketing and rotation scenario has the greatest potential, with a carbon reduction of 17.7 Gt CO 2 eq, while the shared raising with grain legumes scenario has the lowest calculated reduction potential of 7.1 Gt CO 2 eq was calculated. The animal confinement scenario had an intermediary reduction potential of 8.3 Gt CO 2 eq. The mosaic of methods scenario, in which it is attempted to simulate the parallel adoption of the measures proposed in all other scenarios, had a reduction potential of 13.1 Gt CO 2 eq. In the scenarios where animal confinement occurs, the treatment of waste with biodigestion allows the generation of biogas and biofertilizers, contributing to an increase in the potential carbon reduction. - Highlights: • We identify one main source of anthropic GHG in Brazil after forest conversion (deforestation), the beef cattle raising. • Four scenarios to mitigate emissions from cattle

  9. The power sector in China and India: greenhouse gas emissions reduction potential and scenarios for 1990-2020

    International Nuclear Information System (INIS)

    Kroeze, Carolien; Vlasblom, Jaklien; Gupta, Joyeeta; Boudri, Christiaan; Blok, Kornelis

    2004-01-01

    Emissions of greenhouse gases from China and India are expected to increase in the coming two decades. The objectives of this study are two-fold: (1) to quantify the technical potential of various options to reduce emissions of greenhouse gases from the electricity sector in China and India in the year 2020, and (2) to evaluate a business-as-usual (BAU) scenario plus a number of best practice technology (BPT) scenarios for emission reduction of greenhouse gases from electricity production in China and India up to the year 2020. Options to reduce emissions include end use efficiency improvement, fuel switches, and efficiency improvement of existing and new power plants. For China, we calculated that the individual options analysed have technical potentials to reduce 2020 emissions ranging from 1% to 43% (relative to 2020 unabated emissions) and for India from 4% to 45%. Relatively large reduction potentials are calculated for end use efficiency improvement (43% for China and 45% for India), replacement of coal by renewable energy (23% for China and 14% for India) and natural gas (11% for China and 14% for India). Reducing electricity losses during transmission and distribution would reduce emissions by 7% (China) and 6% (India) and electrical efficiency improvement of power plants by 9% in both countries. The reduction options differ with respect to their feasibility. In the BAU scenario, emissions increase considerably between 1990 and 2020. Next, we present results for three BPT scenarios, which reflect the combined technical potential of selected options to reduce emissions. Our calculations indicate that all three scenarios have a potential to reduce emissions to about half the 2020 BAU level. The three scenarios are very different in their assumptions on reduction options, indicating that there are different strategies possible for realising relatively large emission reductions in China and India. We conclude that end use efficiency improvement may be one of

  10. Reduction potentials of energy demand and GHG emissions in China's road transport sector

    International Nuclear Information System (INIS)

    Yan Xiaoyu; Crookes, Roy J.

    2009-01-01

    Rapid growth of road vehicles, private vehicles in particular, has resulted in continuing growth in China's oil demand and imports, which has been widely accepted as a major factor effecting future oil availability and prices, and a major contributor to China's GHG emission increase. This paper is intended to analyze the future trends of energy demand and GHG emissions in China's road transport sector and to assess the effectiveness of possible reduction measures. A detailed model has been developed to derive a reliable historical trend of energy demand and GHG emissions in China's road transport sector between 2000 and 2005 and to project future trends. Two scenarios have been designed to describe the future strategies relating to the development of China's road transport sector. The 'Business as Usual' scenario is used as a baseline reference scenario, in which the government is assumed to do nothing to influence the long-term trends of road transport energy demand. The 'Best Case' scenario is considered to be the most optimized case where a series of available reduction measures such as private vehicle control, fuel economy regulation, promoting diesel and gas vehicles, fuel tax and biofuel promotion, are assumed to be implemented. Energy demand and GHG emissions in China's road transport sector up to 2030 are estimated in these two scenarios. The total reduction potentials in the 'Best Case' scenario and the relative reduction potentials of each measure have been estimated

  11. Inventory and Policy Reduction Potential of Greenhouse Gas and Pollutant Emissions of Road Transportation Industry in China

    Directory of Open Access Journals (Sweden)

    Ye Li

    2016-11-01

    Full Text Available In recent years, emissions from the road transportation industry in China have been increasing rapidly. To evaluate the reduction potential of greenhouse gas and pollutant emissions of the industry in China, its emission inventory was calculated and scenario analysis was created for the period between 2012 and 2030 in this paper. Based on the Long-range Energy Alternatives Planning System (LEAP model, the development of China’s road transportation industry in two scenarios (the business-as-usual (BAU scenario and the comprehensive-mitigation (CM scenario was simulated. In the Comprehensive Mitigation scenario, there are nine various measures which include Fuel Economy Standards, Auto Emission Standards, Energy-saving Technology, Tax Policy, Eco-driving, Logistics Informatization, Vehicle Liquidation, Electric Vehicles, and Alternative Fuels. The cumulative energy and emission reductions of these specific measures were evaluated. Our results demonstrate that China’s road transportation produced 881 million metric tons of CO2 and emitted 1420 thousand tons of CO, 2150 thousand tons of NOx, 148 thousand tons of PM10, and 745 thousand tons of HC in 2012. The reduction potential is quite large, and road freight transportation is the key mitigation subsector, accounting for 85%–92% of the total emission. For energy conservation and carbon emission mitigation, logistics informatization is the most effective method, potentially reducing 1.80 billion tons of coal equivalent and 3.83 billion tons of CO2 from 2012 to 2030. In terms of air pollutant emission mitigation, the auto emission standards measure performs best with respect to NOx, PM10, and HC emission mitigation, and logistic informatization measure is the best in CO emission reduction. In order to maximize the mitigation potential of China’s road transportation industry, the government needs to implement various measures in a timely and strict fashion.

  12. Performance and emission reduction potential of micro-gasifier improved through better design

    Directory of Open Access Journals (Sweden)

    Kamil Dino Adem

    2017-01-01

    Full Text Available Biomass gasification is getting popular for household cooking application in most developing countries including Ethiopia. The preference for biomass gasification is due to the generation of less CO (Carbon Monoxide and PM (Particulate Matter in comparison with other biomass cookstoves. Our study showed the improvement in thermal efficiency and emission reduction potential of micro-gasifier. A prototype micro-gasifier was built and tested using the water boiling test protocol. The test results gave a thermal efficiency of 39.6% and a specific fuel consumption of 57 g of fuel/ liter of water. With regard to indoor air pollution, the maximum CO & PM registered were 12.5 ppm and 1.85 mg/m3, respectively. Using clean development mechanism (CDM methodology, the estimated emission reduction potential of the micro-gasifier is 1.30 tCO2 per micro-gasifier per year. Generally, the micro-gasifier has better performance compared to the previous designs proposed by other researchers. Thus, disseminating our micro-gasifier at a larger scale in developing countries such as Ethiopia will be beneficial in reducing deforestation and emission that will be brought about by using open-fire stoves and thus, helps to obtain carbon credit.

  13. Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry

    International Nuclear Information System (INIS)

    Wang Ke; Wang Can; Lu Xuedu; Chen Jining

    2007-01-01

    The international climate community has begun to assess a range of possible options for strengthening the international climate change effort after 2012. Analysis of the potential for sector-based emissions reduction and relevant mitigation options will provide the necessary background information for the debate. In order to assess the CO 2 abatement potential of China's steel industry, a model was developed using LEAP software to generate 3 different CO 2 emission scenarios for the industry from 2000 to 2030. The abatement potentials of different scenarios were compared, and their respective feasibilities were assessed according to the cost information. High priority abatement measures were then identified. The results show that the average CO 2 abatement per year in the Recent Policy scenario and in the New Policy scenario, compared with the reference scenario, are 51 and 107 million tons, respectively. The corresponding total incremental costs are 9.34 and 80.95 billion dollars. It is concluded that there is great potential for CO 2 abatement in China's steel industry. Adjusting the structure of the industry and technological advancement will play an important role in emissions reduction. Successful implementation of current sustainable development policies and measures will result in CO 2 abatement at a low cost. However, to achieve higher levels of abatement, the cost will increase dramatically. In the near future, specific energy conservation technologies such as dry coke quenching, exhaust gas and heat recovery equipment will be of great significance. However, taking a long term perspective, emissions reduction will rely more on the adjustment of production processes and the application of more modern large scale plants. Advanced blast furnace technology will inevitably play an important role

  14. Greenhouse gas emission reduction policies in developing countries

    International Nuclear Information System (INIS)

    Halsnaes, K.

    2001-01-01

    The chapter begins with an introduction of the main arguments for why global cost-effectiveness in GHG emission reduction policies will suggest that an international collaboration about the policies is established such as initiated by the Kyoto Protocol of the United Nations Framework Convention on Climate Change. A general conceptual overview is given on the cost concepts that are relevant to apply to the evaluation of GHG emission reduction policies, and the methodological framework of GHG emission reduction cost studies for developing countries are introduced. The studies have in particular focussed on GHG emission reduction options in the energy sector, and a number of costing results are reported for this sector. Finally, the chapter considers potential local side-impacts on development, the local environment, and social policy objectives of GHG emission reduction projects seen from the perspective of developing countries. It is concluded that there is a potential for combining global cost-effectiveness principles for GHG emission reduction policies, and local policy objectives of developing countries. (LN)

  15. Profile of emissions reduction options in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Luetken, S.E.; Bertule, M.; Ipsen Hansen, J.; Karavai, M.; Sandbukt, S.; Staun, F.; Wieben, E.

    2013-06-15

    A second commitment period of the Kyoto Protocol has just started. International climate negotiations consistently keep new market based approaches on the agenda. Nationally Appropriate Mitigation Actions are rapidly rising as a new signature concept for a future climate treaty. In response to this momentum, many countries still find themselves in search of concrete emissions reduction options. UNEP Risoe, with the support of the UNFCCC Secretariat and the ACP-MEA Programme, has decided to assess the emissions reduction potential in 15 diverse countries. While most of these countries are not seen as obvious targets for emissions reduction activities, they are nevertheless likely to be involved in some form of future emissions reduction. Consequently, 15 country reports have been developed, from which this synthesis report gathers the main messages. The overall assessments of the potential emissions reduction in the 15 countries are presented. Sector details have been presented throughout the text, allowing an accumulation of overviews of the potentials in the 15 countries distributed across the 7 sectors of the economy around which the country reports have been structured. It is evident that the emissions reduction potential by far exceeds the current emissions reported by the UN, following calculations from the United States Department of Energy's Carbon Dioxide Information Analysis Center (CDIAC). The reason for this is that these figures do not include the indirect emissions caused by current deforestation levels, as presented in the agro and forestry sections of the country reports. The intention behind including these figures is to illustrate that compared to these indirect emissions, almost any emissions reduction initiative, whether CDM or not - even those that may yield hundreds of thousands of tons of CO{sub 2} equivalents - are dwarfed by the main cause of emissions in these countries: deforestation. This source of emissions should be addressed with

  16. Potential reduction of carbon dioxide emissions from the use of electric energy storage on a power generation unit/organic Rankine system

    International Nuclear Information System (INIS)

    Mago, Pedro J.; Luck, Rogelio

    2017-01-01

    Highlights: • A power generation organic Rankine cycle with electric energy storage is evaluated. • The potential carbon dioxide emissions reduction of the system is evaluated. • The system performance is evaluated for a building in different climate zones. • The system emissions and cost are compared with those of conventional systems. • Use of carbon emissions cap and trade programs on the system is evaluated. - Abstract: This paper evaluates the potential carbon dioxide emissions reduction from the implementation of electric energy storage to a combined power generation unit and an organic Rankine cycle relative to a conventional system that uses utility gas for heating and utility electricity for electricity needs. Results indicate that carbon dioxide emission reductions from the operation of the proposed system are directly correlated to the ratio of the carbon dioxide emission conversion factor for electricity to that of the fuel. The location where the system is installed also has a strong influence on the potential of the proposed system to save carbon dioxide emissions. Finally, it is shown that by using carbon emissions cap and trade programs, it is possible to establish a frame of reference to compare/exchange operational cost gains with carbon dioxide emission reductions/gains.

  17. Potential reduction of carbon emissions from Crude Palm Oil production based on energy and carbon balances

    International Nuclear Information System (INIS)

    Patthanaissaranukool, Withida; Polprasert, Chongchin; Englande, Andrew J.

    2013-01-01

    Highlights: ► We evaluate energy and carbon equivalence from CPO production based on a CBM. ► Energy spent and produced via carbon movement from palm oil mill was determined. ► Scenarios were formulated to evaluate the potential reduction of carbon emission. ► Utilization of biomass from palm oil mill shows the high potential of C-reduction. -- Abstract: This study aimed to evaluate energy and carbon equivalences (CE) associated with palm oil milling and to evaluate sustainability alternatives for energy consumption. Appropriate ways to reduce carbon emissions were also evaluated. A field survey was carried out to quantify the input and output of energy and materials following the conceptual framework of a carbon-balanced model (CBM), which exclude other non-CO 2 greenhouse gases. Survey results indicate that the electrical energy consumption for daily mill start-up averaged 18.7 ± 5.4 kWh/ton Fresh Fruit Bunches (FFBs). This energy is equivalent to 114.4 ± 33.2 kWh/ton Crude Palm Oil (CPO) which was found to be offset by that generated in the mills using palm fiber as a solid fuel. Currently, organic residues contained in the wastewater are anaerobically converted to methane. The methane is used as fuel to generate electricity and sold to an outside grid network at a generation rate of 8.1 ± 2.1 kWh/ton FFB. Based on the CBM approach, carbon emissions observed from the use of fossil energy in palm oil milling were very small; however, total carbon emission from oil palm plantation and palm oil milling were found to be 12.3 kg CE/ton FFB, resulting in the net carbon reduction in CPO production of 2.8 kg CE/ton FFB or 53.7 kg CE/ha-y. Overall, the sum of C-reduction was found 1.2 times greater than that of C-emission. This figure can be increased up to 5.5, if all biomass by-products are used as fuel to generate electricity only. The full potential for carbon reduction from palm oil milling is estimated at 0.94 kW of electric power for every hectare of

  18. Assessment of GHG Emission Reduction Potential from Source-separated Organic Waste (SOW) Management: Case Study in a Higher Educational Institution in Malaysia

    International Nuclear Information System (INIS)

    Ng, C.G.; Sumiani Yusoff

    2015-01-01

    In Malaysia, the greenhouse gases (GHGs) emissions reduction via composting of source-separated organic waste (SOW) in municipal solid waste (MSW) has not been assessed. Assessment of GHG emissions reduction via composting of SOW is important as environmental impacts from waste management are waste-specific and local-specific. The study presents the case study for potential carbon reduction via composting of SOW in University of Malaya (UM). In this study, a series of calculations were used to evaluate the GHG emission of different SOW management scenarios. The calculations based on IPCC calculation methods (AM0025) include GHGs emissions from land filling, fuel consumption in transportation and SOW composting activity. The methods were applied to assess the GHG emissions from five alternative SOW management scenarios in UM. From the baseline scenario (S0), a total of 1,636.18 tCO2e was generated. In conjunction with target of 22 % recycling rate, as shown in S1, 14 % reduction in potential GHG emission can be achieved. The carbon reduction can be further enhanced by increasing the SOW composting capacity. The net GHG emission for S1, S2, S3 and S4 were 1,399.52, 1,161.29, 857.70 and 1,060.48 tCO2e, respectively. In general, waste diversion for composting proved a significant net GHG emission reduction as shown in S3 (47 %), S4 (35 %) and S2 (29 %). Despite the emission due to direct on-site activity, the significant reduction in methane generation at landfill has reduced the net GHG emission. The emission source of each scenario was studied and analysed. (author)

  19. Uncertainty quantification of CO2 emission reduction for maritime shipping

    International Nuclear Information System (INIS)

    Yuan, Jun; Ng, Szu Hui; Sou, Weng Sut

    2016-01-01

    The International Maritime Organization (IMO) has recently proposed several operational and technical measures to improve shipping efficiency and reduce the greenhouse gases (GHG) emissions. The abatement potentials estimated for these measures have been further used by many organizations to project future GHG emission reductions and plot Marginal Abatement Cost Curves (MACC). However, the abatement potentials estimated for many of these measures can be highly uncertain as many of these measures are new, with limited sea trial information. Furthermore, the abatements obtained are highly dependent on ocean conditions, trading routes and sailing patterns. When the estimated abatement potentials are used for projections, these ‘input’ uncertainties are often not clearly displayed or accounted for, which can lead to overly optimistic or pessimistic outlooks. In this paper, we propose a methodology to systematically quantify and account for these input uncertainties on the overall abatement potential forecasts. We further propose improvements to MACCs to better reflect the uncertainties in marginal abatement costs and total emissions. This approach provides a fuller and more accurate picture of abatement forecasts and potential reductions achievable, and will be useful to policy makers and decision makers in the shipping industry to better assess the cost effective measures for CO 2 emission reduction. - Highlights: • We propose a systematic method to quantify uncertainty in emission reduction. • Marginal abatement cost curves are improved to better reflect the uncertainties. • Percentage reduction probability is given to determine emission reduction target. • The methodology is applied to a case study on maritime shipping.

  20. Voluntary emission trading potential of Turkey

    International Nuclear Information System (INIS)

    Ari, İzzet

    2013-01-01

    Climate change is likely to cause serious market failures, and carbon trading as a market instrument can help correct its negative impacts. The global carbon markets established to combat climate change include regulatory and voluntary markets. Turkey cannot utilise regulatory carbon markets under the Kyoto Protocol. As a result of her unique position in the UNFCCC, some offsetting projects in Turkey have benefitted only voluntary emission trading for the reduction of GHG emissions. Due to on-going climate change negotiation under the UNFCCC, it seems that Turkey will not use the current regulatory carbon markets. Thus, Turkey should promote the use of and participation in voluntary carbon markets. In this article, emission reduction potential via energy efficiency, renewable energy and solid waste management, and corresponding offsetting of credits with their estimated prices is investigated for the period between 2013 and 2020. The emission reduction potential for energy efficiency, renewable energy and solid waste management projects are estimated at 403, 312 and 356 million tons of CO 2 equivalent emissions respectively, totalling 1,071 million tons of CO 2 equivalent. The total revenue of the carbon certificates are estimated in the range of 19,775–33,386 million US Dollars for the same period. -- Highlights: •Turkey has 1,071 million tons GHG emission reduction in three sectors for 2013–2020. •Turkey can only use voluntary emission trading for reduction of GHGs. •Total revenue estimation could be between 19,775 and 33,386 million US Dollars. •Turkey's economy and emissions have been rapidly growing. •Turkey can more easily reduce its emission by using voluntary emission trading

  1. [Emissions trading potential : achieving emission reductions in a cost-effective manner

    International Nuclear Information System (INIS)

    Fay, K.

    1998-01-01

    The issue of emissions trading as a viable tool to reduce greenhouse gas emissions by developed countries was discussed. The essence of this author's argument was that emissions trading alone will not solve the climate change problem and that the details of the program are hazy at best. In order to have any hope of meeting the emission reductions, it is essential to begin working out the details now, and to coordinate them with the Clean Development Mechanism (CDM) and Joint Implementation (JI) plan since all three of these flexibility mechanisms will be working in and among themselves, therefore they need to be consistent. Work on a general set of draft principles by the International Climate Change Partnership (ICCP), a coalition headquartered in Washington, DC, was summarized. Essentially, ICCP favors voluntary programs, incentives for participation, no quantitative limits on trading, no limits on sources and sinks. ICCP believes that trading should be allowed at the company level, and liability should not devolve on the buyer alone, rather, it should be negotiated between buyers and sellers. Credits for early action should also be tradable and most of all, the trading program should be simple to allow active participation by industry, and be free of bureaucratic impediments

  2. Canadian options for greenhouse gas emission reduction (COGGER)

    International Nuclear Information System (INIS)

    Robinson, J.; Fraser, M.; Haites, E.; Harvey, D.; Jaccard, M.; Reinsch, A.; Torrie, R.

    1993-09-01

    A panel was formed to assess the feasibility and cost of energy-related greenhouse gas (GHG) emissions reduction in Canada. The panel studies focused on the potential for increased energy efficiency and fuel switching and their effect in reducing CO 2 emissions by reviewing the extensive literature available on those topics and assessing their conclusions. Economically feasible energy savings are estimated mostly in the range of 20-40% savings by the year 2010 relative to a reference-case projection, with a median of 23%. The panel concluded that achieving the identified economic potential for increased energy efficiency by 2010 will depend on development of additional demand-side management or energy efficiency programs that go well beyond current policies and programs. Fuel switching will play a much smaller role in stabilizing energy-related CO 2 emissions than improved energy efficiency. Technology substitution and broader structural change would enable Canada to achieve significant reductions in CO 2 emissions; however, more research is needed on achieving emission reductions that would approach the levels estimated to be required globally for stabilization of atmospheric CO 2 concentrations. Achieving such emissions reductions would likely require a combination of significant improvements in energy efficiency, major changes in energy sources, and substantial changes in economic activity and life styles, relative to that projected in most reference-case forecasts. 5 refs., 1 fig., 10 tabs

  3. Deep greenhouse gas emission reductions in Europe: Exploring different options

    International Nuclear Information System (INIS)

    Deetman, Sebastiaan; Hof, Andries F.; Pfluger, Benjamin; Vuuren, Detlef P. van; Girod, Bastien; Ruijven, Bas J. van

    2013-01-01

    Most modelling studies that explore emission mitigation scenarios only look into least-cost emission pathways, induced by a carbon tax. This means that European policies targeting specific – sometimes relatively costly – technologies, such as electric cars and advanced insulation measures, are usually not evaluated as part of cost-optimal scenarios. This study explores an emission mitigation scenario for Europe up to 2050, taking as a starting point specific emission reduction options instead of a carbon tax. The purpose is to identify the potential of each of these policies and identify trade-offs between sectoral policies in achieving emission reduction targets. The reduction options evaluated in this paper together lead to a reduction of 65% of 1990 CO 2 -equivalent emissions by 2050. More bottom-up modelling exercises, like the one presented here, provide a promising starting point to evaluate policy options that are currently considered by policy makers. - Highlights: ► We model the effects of 15 climate change mitigation measures in Europe. ► We assess the greenhouse gas emission reduction potential in different sectors. ► The measures could reduce greenhouse gas emissions by 60% below 1990 levels in 2050. ► The approach allows to explore arguably more relevant climate policy scenarios

  4. Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in India's Cement Industry

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, III, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Xu, Tengfang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-12-03

    India’s cement industry is the second largest in the world behind China with annual cement production of 168 Mt in 2010 which accounted for slightly greater than six percent of the world’s annual cement production in the same year. To produce that amount of cement, the industry consumed roughly 700 PJ of fuel and 14.7 TWh of electricity. We identified and analyzed 22 energy efficiency technologies and measures applicable to the processes in the Indian cement industry. The Conservation Supply Curve (CSC) used in this study is an analytical tool that captures both the engineering and the economic perspectives of energy conservation. Using a bottom-up electricity CSC model and compared to an electricity price forecast the cumulative cost-effective plant-level electricity savings potential for the Indian cement industry for 2010- 2030 is estimated to be 83 TWh, and the cumulative plant-level technical electricity saving potential is 89 TWh during the same period. The grid-level CO2 emissions reduction associated with cost-effective electricity savings is 82 Mt CO2 and the electric grid-level CO2 emission reduction associated with technical electricity saving potential is 88 Mt CO2. Compared to a fuel price forecast, an estimated cumulative cost-effective fuel savings potential of 1,029 PJ with associated CO2 emission reduction of 97 Mt CO2 during 2010-2030 is possible. In addition, a sensitivity analysis with respect to the discount rate used is conducted to assess the effect of changes in this parameter on the results. The result of this study gives a comprehensive and easy to understand perspective to the Indian cement industry and policy makers about the energy efficiency potential and its associated cost over the next twenty years.

  5. Evaluating the CO 2 emissions reduction potential and cost of power sector re-dispatch

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, Daniel C.; Bielen, David A.; Townsend, Aaron

    2018-01-01

    Prior studies of the U.S. electricity sector have recognized the potential to reduce carbon dioxide (CO2) emissions by substituting generation from coal-fired units with generation from under-utilized and lower-emitting natural gas-fired units; in fact, this type of 're-dispatch' was invoked as one of the three building blocks used to set the emissions targets under the Environmental Protection Agency's Clean Power Plan. Despite the existence of surplus natural gas capacity in the U.S., power system operational constraints not often considered in power sector policy analyses, such as transmission congestion, generator ramping constraints, minimum generation constraints, planned and unplanned generator outages, and ancillary service requirements, could limit the potential and increase the cost of coal-to-gas re-dispatch. Using a highly detailed power system unit commitment and dispatch model, we estimate the maximum potential for re-dispatch in the Eastern Interconnection, which accounts for the majority of coal capacity and generation in the U.S. Under our reference assumptions, we find that maximizing coal-to-gas re-dispatch yields emissions reductions of 230 million metric tons (Mt), or 13% of power sector emissions in the Eastern Interconnection, with a corresponding average abatement cost of $15-$44 per metric ton of CO2, depending on the assumed supply elasticity of natural gas.

  6. Counter of Energy Conservation and Emission Reduction for the Public in China

    Energy Technology Data Exchange (ETDEWEB)

    Wujun Wen; Xiaowen Liu; Geng Xu (Research Center for Sustainable Development of Shandong Province, Shandong Normal Univ., Jinan Shandong 250014 (China)). e-mail: wenwj@sdnu.edu.cn

    2009-05-15

    The Ministry of Science and Technology of China organized experts to develop the Internet-based software Counter of Energy Conservation and Emission Reduction to directly measure energy conservation and emission reduction potentials in people's daily lives. Research and testing of the software have been completed, and the software is available to the public on the Internet. The Counter of Energy Conservation and Emission Reduction software is being promoted with the aim of stimulating the public's enthusiasm for energy conservation and emission reduction. The software is of great significance in energy conservation and emission reduction education oriented to elementary and middle school students and community residents, thus changing the lagged public participation of Chinese citizens in energy conservation and emission reduction. The counter can calculate people's energy conservation and emission reduction potential in six aspects of daily life. The user can know his or her value of energy conservation and emission reduction in each aspect by clicking the options in keeping with his or her true daily routines. The user can also know the amounts of energy conservation and emission reduction as well as the potential energy conservation and emission reduction of the whole nation by clicking the Effect Calculation Button. Family life areas mainly include the methods and habits of water use, the use of energy conservation cookers, methods of saving paper, the use of environmental protection products, the habit of home appliance use, and the methods of washing clothing, especially the use of the washing machine with the function of energy conservation. Housing includes the building materials, the heating and cooling systems, the temperature control measures, and the lighting, etc. Heating and cooling times for the house by air conditioner should be reduced. Architects can do a great deal by using energy-efficient building materials and designing houses

  7. Potential for reduction of methane emissions from dairy cows

    DEFF Research Database (Denmark)

    Johannes, Maike; Hellwing, Anne Louise Frydendahl; Lund, Peter

    2010-01-01

    Methane is a gas cows naturally produce in the rumen. However, it is also a potential greenhouse gas. Therefore, there is a certain interest from an environmental point of view to reduce methane emissions from dairy cows. Estimates from earlier studies indicate that there is a potential to reduce...... methane production by 10 to 25% by changing the feeding strategies. Several feedstuffs influence methane production, such as additional fat. The increase of the concentrate proportion can potentially decrease methane by decreasing the rumen degradability of the diet or by changing the rumen fermentation......, while fibre and sugar enhance methane emissions. Fat can be regarded as the most promising feed additive at the moment. At AU, respiration chambers have been installed to enable methane measurements from dairy cows combined with digestibility trials, and at present studies are being conducted concerning...

  8. POTENTIAL HEALTH RISK REDUCTION ARISING FROM REDUCED MERCURY EMISSIONS FROM COAL FIRED POWER PLANTS.

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, T. M.; Lipfert, F. W.; Morris, S. C.; Moskowitz, P. D.

    2001-09-01

    The U.S. Environmental Protection Agency (EPA) has announced plans to regulate mercury (Hg) emissions from coal-fired power plants. EPA has not prepared a quantitative assessment of the reduction in risk that could be achieved through reduction in coal plant emissions of Hg. To address this issue, Brookhaven National Laboratory (BNL) with support from the U.S. Department of Energy Office of Fossil Energy (DOE FE) prepared a quantitative assessment of the reduction in human health risk that could be achieved through reduction in coal plant emissions of Hg. The primary pathway for Hg exposure is through consumption of fish. The most susceptible population to Hg exposure is the fetus. Therefore the risk assessment focused on consumption of fish by women of child-bearing age. Dose response factors were generated from studies on loss of cognitive abilities (language skills, motor skills, etc.) by young children whose mothers consumed large amounts of fish with high Hg levels. Population risks were estimated for the general population in three regions of the country, (the Midwest, Northeast, and Southeast) that were identified by EPA as being heavily impacted by coal emissions. Three scenarios for reducing Hg emissions from coal plants were considered: (1) A base case using current conditions; (2) A 50% reduction; and, (3) A 90% reduction. These reductions in emissions were assumed to translate linearly into a reduction in fish Hg levels of 8.6% and 15.5%, respectively. Population risk estimates were also calculated for two subsistence fisher populations. These groups of people consume substantially more fish than the general public and, depending on location, the fish may contain higher Hg levels than average. Risk estimates for these groups were calculated for the three Hg levels used for the general population analyses. Analysis shows that the general population risks for exposure of the fetus to Hg are small. Estimated risks under current conditions (i.e., no

  9. Cost-effective reduction of fine primary particulate matter emissions in Finland

    International Nuclear Information System (INIS)

    Karvosenoja, Niko; Klimont, Zbigniew; Tohka, Antti; Johansson, Matti

    2007-01-01

    Policies to reduce adverse health impacts of fine particulate matter (PM 2.5 ) require information on costs of abatement and associated costs. This paper explores the potential for cost-efficient control of anthropogenic primary PM 2.5 emissions in Finland. Based on a Kyoto-compliant energy projection, two emission control scenarios for 2020 were developed. 'Baseline' assumes implementation of PM controls in compliance with existing legislation. 'Reduction' assumes ambitious further reductions. Emissions for 2020 were estimated at 26 and 18.6 Gg a -1 for 'Baseline' and 'Reduction', respectively. The largest abatement potential, 3.0 Gg a -1 , was calculated for power plants and industrial combustion. The largest potential with marginal costs below 5000 Euro MG(PM 2.5 ) -1 was for domestic wood combustion, 1.7 Gg a -1 . For traffic the potential was estimated at 1.0 Gg a -1 , but was associated with high costs. The results from this paper are used in the policy-driven national integrated assessment modeling that explores cost-efficient reductions of the health impacts of PM

  10. Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in the Cement Industry in China

    Energy Technology Data Exchange (ETDEWEB)

    Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Morrow, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Masanet, Eric [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Xu, Tengfang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-06-15

    China’s annual cement production (i.e., 1,868 Mt) in 2010 accounted for nearly half of the world’s annual cement production in the same year. We identified and analyzed 23 energy efficiency technologies and measures applicable to the processes in the cement industry. The Conservation Supply Curve (CSC) used in this study is an analytical tool that captures both the engineering and the economic perspectives of energy conservation. Using a bottom-up electricity CSC model, the cumulative cost-effective electricity savings potential for the Chinese cement industry for 2010-2030 is estimated to be 251 TWh, and the total technical electricity saving potential is 279 TWh. The CO2 emissions reduction associated with cost-effective electricity savings is 144 Mt CO2 and the CO2 emission reduction associated with technical electricity saving potential is 161 Mt CO2. The fuel CSC model for the cement industry suggests cumulative cost-effective fuel savings potential of 4,326 PJ which is equivalent to the total technical potential with associated CO2 emission reductions of 406 Mt CO2. In addition, a sensitivity analysis with respect to the discount rate used is conducted to assess the effect of changes in this parameter on the results. We also developed a scenario in which instead of only implementing the international technologies in 2010-2030, we implement both international and Chinese domestic technologies during the analysis period and calculate the saving and cost of conserved energy accordingly. The result of this study gives a comprehensive and easy to understand perspective to the Chinese cement industry and policy makers about the energy efficiency potential and its associated cost.

  11. Reducing air pollution from electricity-generating large combustion plants in the European Union. An assessment of potential emission reductions of NO{sub X}, SO{sub 2} and dust

    Energy Technology Data Exchange (ETDEWEB)

    Lodewijks, P.; Pieper, H.; Van Wortswinkel, L. [ETC partner Flemish Institute for Technological Research (VITO) (Belgium); Boyce, B.; Adams, M.; Goossens, E. [EEA, Copenhagen (Denmark)

    2013-06-15

    An assessment of potential emission reductions of NO{sub X}, SO{sub 2} and dust - This report presents an assessment of the hypothetical emission reduction potential of NO{sub x}, SO{sub 2} and dust from more than 1 500 of Europe's large combustion plants that operated in 2009. Emissions of these air pollutants could be significantly lower if all plants were to meet the emission limit values as set out in European Union legislation. (Author)

  12. Carbon emission reduction targeting through process integration and fuel switching with mathematical modeling

    International Nuclear Information System (INIS)

    Tiew, B.J.; Shuhaimi, M.; Hashim, H.

    2012-01-01

    Highlights: ► CO 2 emissions reduction targeting for existing plant were categorized into three groups. ► Model for CO 2 emissions reduction targeting via combination approach was developed. ► Effect of combination approach onto HEN area efficiency was discussed. ► Proposed execution strategy can avoid HEN area efficiency deterioration. -- Abstract: Carbon emission reduction targeting is an important and effective effort for industry to contribute in controlling greenhouse gases concentration in atmosphere. Graphical approach has been proposed for CO 2 emissions reduction targeting via HEN retrofit and fuel switching. However, it involves potentially time consuming manual procedures and the quality of solutions produced greatly depends on designer’s experience and judgment. Besides, graphical approach hardly account for the cost factor during the design phase, thus potentially generate complex design. This paper introduces an MINLP model for simultaneous CO 2 emissions reduction targeting via fuel switching and HEN retrofit. A sequential model execution was proposed along with the proposed model. The application of the model on a crude preheat train case study has demonstrated its workability to generate optimal solution for targeted CO 2 emissions reduction at minimum payback period.

  13. Cement replacement by sugar cane bagasse ash: CO2 emissions reduction and potential for carbon credits.

    Science.gov (United States)

    Fairbairn, Eduardo M R; Americano, Branca B; Cordeiro, Guilherme C; Paula, Thiago P; Toledo Filho, Romildo D; Silvoso, Marcos M

    2010-09-01

    This paper presents a study of cement replacement by sugar cane bagasse ash (SCBA) in industrial scale aiming to reduce the CO(2) emissions into the atmosphere. SCBA is a by-product of the sugar/ethanol agro-industry abundantly available in some regions of the world and has cementitious properties indicating that it can be used together with cement. Recent comprehensive research developed at the Federal University of Rio de Janeiro/Brazil has demonstrated that SCBA maintains, or even improves, the mechanical and durability properties of cement-based materials such as mortars and concretes. Brazil is the world's largest sugar cane producer and being a developing country can claim carbon credits. A simulation was carried out to estimate the potential of CO(2) emission reductions and the viability to issue certified emission reduction (CER) credits. The simulation was developed within the framework of the methodology established by the United Nations Framework Convention on Climate Change (UNFCCC) for the Clean Development Mechanism (CDM). The State of São Paulo (Brazil) was chosen for this case study because it concentrates about 60% of the national sugar cane and ash production together with an important concentration of cement factories. Since one of the key variables to estimate the CO(2) emissions is the average distance between sugar cane/ethanol factories and the cement plants, a genetic algorithm was developed to solve this optimization problem. The results indicated that SCBA blended cement reduces CO(2) emissions, which qualifies this product for CDM projects. 2010 Elsevier Ltd. All rights reserved.

  14. Establishing credible emission reduction estimates: GERT's experience

    International Nuclear Information System (INIS)

    Loseth, H.

    2001-01-01

    To address the challenge of reducing the greenhouse gas emissions in Canada, the federal and provincial governments are developing strategies and policies to reach that goal. One of the proposed solutions is the establishment of an emission trading system, which it is believed would encourage investment in lower-cost reductions. The Greenhouse Gas Emission Reduction Trading (GERT) pilot was established in 1998 to examine emission trading. It represents the collaborative efforts of government, industry, and non-governmental organizations. It is possible to establish emission reduction trading outside of a regulated environment. Emission reduction is defined as being an action which reduces emissions when compared to what they would have been otherwise. The functioning of GERT was described from the initial application by a buyer/seller to the review process. The assessment of projects is based on mandatory criteria: reductions of emissions must be real, measurable, verifiable and surplus. A section of the presentation was devoted to landfill gas recovery project issues, while another dealt with fuel substitution project issues. Section 5 discussed emission reductions from an off-site source electricity project issues. figs

  15. The potentional of renewable energy sources for greenhouse gases emissions reduction in Macedonia

    Directory of Open Access Journals (Sweden)

    Dedinec Aleksandar

    2012-01-01

    Full Text Available As European Union (EU candidate country, Macedonia is in the process of adoption of the EU strategic energy policies, harmonization of the national legislation with the EU legislation and defining the respective national goals. In this regard, the government has recently adopted a National Strategy for Utilization of Renewable Energy Sources (RES, prepared by ICEIM-MANU. The main goal of this paper is to assess the potential for greenhouse gases (GHG emissions reduction by implementation of 21%-RES-scenarios from the Strategy. The corresponding emissions reduction is calculated against the baseline (reference scenario developed within the Second National Communication on Climate Change. Furthermore, all potential RES technologies are analyzed from economic aspect and combined in a form of emissions reduction cost curve, displaying the total marginal cost of the GHG emissions reduction by RES. Finally, on the bases of the environmental and economic effectiveness of the considered RES technologies, as well as taking into account the country specific barriers, the priority actions for GHG emissions reduction are identified.

  16. Scenario analysis of energy saving and CO_2 emissions reduction potentials to ratchet up Japanese mitigation target in 2030 in the residential sector

    International Nuclear Information System (INIS)

    Wakiyama, Takako; Kuramochi, Takeshi

    2017-01-01

    This paper assesses to what extent CO_2 emissions from electricity in the residential sector can be further reduced in Japan beyond its post-2020 mitigation target (known as “Intended Nationally Determined Contribution (INDC)”). The paper examines the reduction potential of electricity demand and CO_2 emissions in the residential sector by conducting a scenario analysis. Electricity consumption scenarios are set up using a time-series regression model, and used to forecast the electricity consumption patterns to 2030. The scenario analysis also includes scenarios that reduce electricity consumption through enhanced energy efficiency and energy saving measures. The obtained results show that Japan can reduce electricity consumption and CO_2 emissions in the residential sector in 2030 more than the Japanese post-2020 mitigation target indicates. At the maximum, the electricity consumption could be reduced by 35 TWh, which contributes to 55.4 MtCO_2 of emissions reduction in 2030 compared to 2013 if the voluntarily targeted CO_2 intensity of electricity is achieved. The result implies that Japan has the potential to ratchet up post-2020 mitigation targets discussed under the Paris Agreement of the United Nations Framework Convention on Climate Change (UNFCCC). - Highlights: • Further reduction of electricity consumption is possible beyond Japan's post-2020 mitigation target. • Energy saving efforts by households and incentives to reduce electricity demands are required. • Improvement of CO_2 intensity from electricity is a key factor in the reduction of CO_2 emissions.

  17. California Air Resources board's mobil source emission reduction credit guidelines

    International Nuclear Information System (INIS)

    Dunwoody Lentz, C.; Werner, B.

    1993-01-01

    The California Air Resources Board has developed guidance for the generation and use of mobil source emission reduction credits. Mobil source credits can be used to improve air quality, or to mitigate increases in emissions associated with industrial and non-industrial sources. They are created by programs which reduce mobile source emission beyond the reductions required by federal, state, and local laws or air quality attainment plans. Significant amounts of credit can be generated by some types of programs which reduce mobile source emissions of oxides of nitrogen (NO x ) and reactive organic gases (ROG). Mobile source credit programs must be carefully structured to ensure that emission reductions are real, accurately quantified, enforceable, and have a defined life. Three potentially feasible programs for the creation of mobile source credits include accelerated retirement of older vehicles, purchase of low-emission buses, and purchase of zero-emission vehicles. These programs are evaluated for their ability to generate credit and to assess their cost effectiveness. Based on the examples presented, two methods of generating mobile source credits, the accelerated retirement of older vehicles and the purchase of low-emission buses, appear to be cost-effective when compared to other emission control measures

  18. Carbon emissions reduction potential in the US chemicals and pulp and paper industries by applying CHP technologies

    International Nuclear Information System (INIS)

    Khrushch, M.; Worrell, E.; Price, L.; Martin, N.; Einstein, D.

    1999-01-01

    The chemical and the pulp/paper industries combined provide 55% of CHP generation in the US industry. Yet, significant potential for new CHP capacities exists in both industries. From the present steam consumption data, the authors estimate about 50 GW of additional technical potential for CHP in both industries. The reduced carbon emissions will be equivalent to 44% of the present carbon emissions in these industries. They find that most of the carbon emissions reductions can be achieved at negative costs. Depending on the assumptions used in calculations, the economic potential of CHP in these industries can be significantly lower, and carbon emissions mitigation costs can be much higher. Using sensitivity analyses, they determine that the largest effect on the CHP estimate have the assumptions in the costs of CHP technology, in the assumed discount rates, in improvements in efficiency of CHP technologies, and in the CHP equipment depreciation periods. Changes in fuel and electricity prices and the growth in the industries' steam demand have less of an effect. They conclude that the lowest carbon mitigation costs are achieved with the CHP facility is operated by the utility and when industrial company that owns the CHP unit can sell extra electricity and steam to the open wholesale market. Based on the results of the analyses they discuss policy implications

  19. Global Emissions of Nitrous Oxide: Key Source Sectors, their Future Activities and Technical Opportunities for Emission Reduction

    Science.gov (United States)

    Winiwarter, W.; Höglund-Isaksson, L.; Klimont, Z.; Schöpp, W.; Amann, M.

    2017-12-01

    Nitrous oxide originates primarily from natural biogeochemical processes, but its atmospheric concentrations have been strongly affected by human activities. According to IPCC, it is the third largest contributor to the anthropogenic greenhouse gas emissions (after carbon dioxide and methane). Deep decarbonization scenarios, which are able to constrain global temperature increase within 1.5°C, require strategies to cut methane and nitrous oxide emissions on top of phasing out carbon dioxide emissions. Employing the Greenhouse gas and Air pollution INteractions and Synergies (GAINS) model, we have estimated global emissions of nitrous oxide until 2050. Using explicitly defined emission reduction technologies we demonstrate that, by 2030, about 26% ± 9% of the emissions can be avoided assuming full implementation of currently existing reduction technologies. Nearly a quarter of this mitigation can be achieved at marginal costs lower than 10 Euro/t CO2-eq with the chemical industry sector offering important reductions. Overall, the largest emitter of nitrous oxide, agriculture, also provides the largest emission abatement potentials. Emission reduction may be achieved by precision farming methods (variable rate technology) as well as by agrochemistry (nitrification inhibitors). Regionally, the largest emission reductions are achievable where intensive agriculture and industry are prevalent (production and application of mineral fertilizers): Centrally Planned Asia including China, North and Latin America, and South Asia including India. Further deep cuts in nitrous oxide emissions will require extending reduction efforts beyond strictly technological solutions, i.e., considering behavioral changes, including widespread adoption of "healthy diets" minimizing excess protein consumption.

  20. Agriculture and greenhouse gases emissions reduction; Agriculture et reduction des emissions de gaz a effet de serre

    Energy Technology Data Exchange (ETDEWEB)

    Leguet, B.

    2005-09-15

    In France, the agriculture is the third sector of greenhouse gases emitter. Meanwhile since 1990 this sector poorly reduces its greenhouse gases. It is necessary to find mechanisms which allow the valorization of emissions reduction. In this framework the author presents the specificities of the greenhouse gases emissions of the agricultural sector, the possible incentives of emissions reduction, the reduction projects in France and abroad. (A.L.B.)

  1. Assessment of CO2 emission reduction and identification of CDM potential in a township

    Energy Technology Data Exchange (ETDEWEB)

    Misra, R.; Aseri, Tarun Kumar; Jamuwa, Doraj Karnal [Department of Mechanical Engineering, Government Engineering College, Ajmer, Rajasthan (India); Bansal, V. [Department of Mechanical Engineering, Government Mahila Engineering College, Ajmer, Rajasthan (India)

    2012-11-15

    This paper presents the theoretical investigation of CDM opportunity in a township at Jaipur, India. The purpose of study is to identify and analyze the various opportunities viz., installation of solar water heater, energy efficient lighting, energy efficient air conditioners, and energy efficient submersible water pumps in desert coolers and thus achieve a considerable (65.7 %) reduction in GHG emissions. Out of the various opportunities considered, the retrofitting with solar water heater can be recommended for CDM. Though, the retrofitting with energy efficient lighting, energy efficient air conditioners and energy efficient submersible water pumps in desert coolers claimed CO2 emission reduction of 104.84, 25.92, and 36.94 tons per annum, respectively, but the only opportunity which got through CDM was retrofitting with solar water heater claiming 115.70 tCO2 (100 %) emission reductions per annum which could result into net earnings of 115.70 CERs. The simple and discounted payback period for all four project activities are also calculated with and without CDM and tax benefits.

  2. Economical benzene emission reduction

    International Nuclear Information System (INIS)

    Schuetz, R.

    1999-01-01

    Benzene has been classified as a toxic compound under the Canadian Environmental Protection Act. This has prompted the Alberta Energy and Utilities Board (AEUB) to introduce specific reporting and monitoring guidelines for the oil and gas industry regarding excessive benzene emissions. Glycol dehydration units have been determined to be the major single source of benzene emissions causing air and soil pollution. DualTank Corp. has designed a condensation and storage tank unit to enhance emission reduction, odour elimination and liquid recovery from dehydration units. Their newly designed combined tank unit consists of a large, uninsulated surface area for cooling, and an excessive internal volume for increased retention time. The first prototype was installed in December 1998 at an Enerplus Resources Site. The system provides excellent benzene emission reduction and the elimination of odours and visual plumes. Effective January 1, 1999, the petroleum and natural gas industry must either clean up excessive emissions voluntarily or face government imposed regulations, facility shutdowns and/or fines. 1 fig

  3. Emerging economies. Potentials, pledges and fair shares of greenhouse gas reduction

    Energy Technology Data Exchange (ETDEWEB)

    Fekete, Hanna; Hoehne, Niklas; Hagemann, Markus [Ecofys Germany GmbH, Koeln (Germany); Wehnert, Timon; Mersmann, Florian [Wuppertal Institute for Climate, Environment, Energy GmbH (Germany); Vieweg, Marion; Rocha, Marcia; Schaeffer, Michiel; Hare, William [Climate Analytics gGmbH, Berlin (Germany)

    2013-04-15

    Greenhouse gas emissions need to decrease substantially to limit global average temperature to a maximum of 2 C warming above the preindustrial level in 2100. Emerging economies are of increasing importance in this global effort. In this report we assess how ambitious emission reduction pledges of emerging economies are compared to business as usual emissions, the countries' mitigation potential and respective efforts based on different equity principles. We also compare the pledges and the identified mitigation potential of emerging economies to a global emissions pathway needed to limit global temperature increase to 2 C. Our assessment includes Brazil, China, India, Mexico, South Africa and South Korea. We find that emerging economies have a substantial impact on future global emission levels. This is due to high current levels and high projected growth rates. Also, in most of the countries a large emission reduction potential is available. Action needs to be taken soon to enable the full use of the potential until 2020 and most emerging economies will need significant support from developed countries to implement those.

  4. Using mobile source emission reductions to offset stationary surce rule requirements

    International Nuclear Information System (INIS)

    Nazemi, M.A.; Beruldsen, K.J.

    1993-01-01

    A number of mobile source strategies have been evaluated that could potentially be used as an alternative means of compliance with existing stationary source regulations, at a lower cost. The evaluation was spurred by both public and private sector interest in identifying the lowest cost air pollution reduction strategies, and the realization that mobile sources are the predominate contributor to the air pollution problem in the South Coast Air Quality Basin. Strategies evaluated included removing older vehicles from the in-use population, use of alternative fuels, inspection and maintenance measures, application of remote sensing technology, exceeding AVR requirements, as well as a number of other strategies. Key implementation issues have been identified, so that the viability of each mobile source strategies could be assessed. These issues include: (1) quantification of emissions benefits, (2) determining whether the mobile source strategy would generate emission reductions surplus to existing and planned mobile source regulations, and (3) assessing the potential for enforceability. The results of evaluation indicate that there are a number of promising mobile source emission strategies that could provide quantifiable, surplus, and enforceable emission reductions

  5. Reductions in greenhouse gas emissions and cost by shipping at lower speeds

    International Nuclear Information System (INIS)

    Lindstad, Haakon; Asbjornslett, Bjorn E.; Stromman, Anders H.

    2011-01-01

    CO 2 emissions from maritime transport represent a significant part of total global greenhouse gas (GHG) emissions. According to the International Maritime Organization (), maritime transport emitted 1046 million tons (all tons are metric) of CO 2 in 2007, representing 3.3% of the world's total CO 2 emissions. The International Maritime Organization (IMO) is currently debating both technical and market-based measures for reducing greenhouse gas emissions from shipping. This paper presents investigations on the effects of speed reductions on the direct emissions and costs of maritime transport, for which the selection of ship classes was made to facilitate an aggregated representation of the world fleet. The results show that there is a substantial potential for reducing CO 2 emissions in shipping. Emissions can be reduced by 19% with a negative abatement cost (cost minimization) and by 28% at a zero abatement cost. Since these emission reductions are based purely on lower speeds, they can in part be performed now. - Highlights: → We investigates the effects of speed reductions for maritime transport. → The selection of ship classes represent the words fleet. → The transport volumes are kept constant. → The model includes both cost and emissions as a function of speed. → The results show that there is a substantial potential for reducing CO 2 emissions from shipping.

  6. Analysis of CO2 emissions reduction in the Malaysian transportation sector: An optimisation approach

    International Nuclear Information System (INIS)

    Mustapa, Siti Indati; Bekhet, Hussain Ali

    2016-01-01

    The demand for transport services is expected to rise, causing the CO 2 emissions level to increase as well. In Malaysia, the transportation sector accounts for 28% of total CO 2 emissions, of which 85% comes from road transport. By 2020, Malaysia is targeting a reduction in CO 2 emissions intensity by up to 40% and in this effort the role of road transport is paramount. This paper attempts to investigate effective policy options that can assist Malaysia in reducing the CO 2 emissions level. An Optimisation model is developed to estimate the potential CO 2 emissions mitigation strategies for road transport by minimising the CO 2 emissions under the constraint of fuel cost and demand travel. Several mitigation strategies have been applied to analyse the effect of CO 2 emissions reduction potential. The results demonstrate that removal of fuel price subsidies can result in reductions of up to 652 ktonnes of fuel consumption and CO 2 emissions can be decreased by 6.55%, which would enable Malaysia to hit its target by 2020. CO 2 emissions can be reduced significantly, up to 20%, by employing a combination of mitigation policies in Malaysia. This suggests that appropriate mitigation policies can assist the country in its quest to achieve the CO 2 emissions reduction target. - Highlights: • An optimisation model for CO 2 emissions reduction in Malaysia's road transport is formulated. • Sensible policy options to achieve the CO 2 emissions reduction target are provided. • Increase in fuel price has induced shift towards fuel efficient vehicles. • The CO 2 emissions can be reduced up to 5.7 MtCO 2 with combination of mitigation policies.

  7. Energy saving and emission reduction of China's urban district heating

    International Nuclear Information System (INIS)

    Chen, Xia; Wang, Li; Tong, Lige; Sun, Shufeng; Yue, Xianfang; Yin, Shaowu; Zheng, Lifang

    2013-01-01

    China's carbon dioxide (CO 2 ) emission ranks highest in the world. China is committed to reduce its CO 2 emission by 40% to 45% from the 2005 levels by 2020. To fulfill the target, China's CO 2 emission reduction must exceed 6995 million tons. Energy consumption and CO 2 emission of China's urban district heating (UDH) are increasing. The current policy implemented to improve UDH focuses on replacing coal with natural gas to reduce energy consumption and CO 2 emission to some extent. This paper proposes that heat pump heating (HPH) could serve as a replacement for UDH to help realize energy-saving and emission-reduction goals to a greater extent. The paper also analyzes the impact of this replacement on the heating and power generation sectors. The results show that replacing coal-based UDH with HPH decreases energy consumption and CO 2 emission by 43% in the heating sector. In the power generation sector, the efficiency of power generation at the valley electricity time increases by 0.512%, and the ratio of peak–valley difference decreases by 16.5%. The decreases in CO 2 emission from the heating and power generation sectors cumulatively account for 5.55% of China's total CO 2 emission reduction target in 2020. - Highlights: ► Replacing urban district heating with heat pump heating. ► Impact of heat pump heating on heating and power generation sectors. ► Potential of energy saving and emission reduction for heat pump heating. ► China should adjust current urban heating strategy

  8. Developing emission reduction credit trading in Texas

    International Nuclear Information System (INIS)

    Dodds, J.E.

    1993-01-01

    The Texas Air Control Board has begun to develop a system of emission reduction credit training. The system will be developed incrementally over time. The first step, banking of VOC and NO x Emission Reduction Credits, began March 15, 1993. Additional programs under study and development include NO x RACT trading, emission credits for motor vehicle scrappage and alternative fuel conversion, and establishment of community organizations to generate and acquire emission reduction credits for economic development purposes

  9. Applicabilities of ship emission reduction methods

    Energy Technology Data Exchange (ETDEWEB)

    Guleryuz, Adem [ARGEMAN Research Group, Marine Division (Turkey)], email: ademg@argeman.org; Kilic, Alper [Istanbul Technical University, Maritime Faculty, Marine Engineering Department (Turkey)], email: enviromarineacademic@yahoo.com

    2011-07-01

    Ships, with their high consumption of fossil fuels to power their engines, are significant air polluters. Emission reduction methods therefore need to be implemented and the aim of this paper is to assess the advantages and disadvantages of each emissions reduction method. Benefits of the different methods are compared, with their disadvantages and requirements, to determine the applicability of such solutions. The methods studied herein are direct water injection, humid air motor, sea water scrubbing, diesel particulate filter, selected catalytic reduction, design of engine components, exhaust gas recirculation and engine replacement. Results of the study showed that the usefulness of each emissions reduction method depends on the particular case and that an evaluation should be carried out for each ship. This study pointed out that methods to reduce ship emissions are available but that their applicability depends on each case.

  10. Quantifying emission reduction contributions by emerging economics

    Energy Technology Data Exchange (ETDEWEB)

    Moltmann, Sara; Hagemann, Markus; Eisbrenner, Katja; Hoehne, Niklas [Ecofys GmbH, Koeln (Germany); Sterk, Wolfgang; Mersmann, Florian; Ott, Hermann E.; Watanabe, Rie [Wuppertal Institut (Germany)

    2011-04-15

    Further action is needed that goes far beyond what has been agreed so far under the United Nations Framework Convention on Climate Change (UNFCCC) and the Kyoto Protocol to 'prevent dangerous anthropogenic interference with the climate system', the ultimate objective of the UNFCCC. It is out of question that developed countries (Annex I countries) will have to take a leading role. They will have to commit to substantial emission reductions and financing commitments due to their historical responsibility and their financial capability. However, the stabilisation of the climate system will require global emissions to peak within the next decade and decline well below half of current levels by the middle of the century. It is hence a global issue and, thus, depends on the participation of as many countries as possible. This report provides a comparative analysis of greenhouse gas (GHG) emissions, including their national climate plans, of the major emitting developing countries Brazil, China, India, Mexico, South Africa and South Korea. It includes an overview of emissions and economic development, existing national climate change strategies, uses a consistent methodology for estimating emission reduction potential, costs of mitigation options, provides an estimate of the reductions to be achieved through the national climate plans and finally provides a comparison of the results to the allocation of emission rights according to different global effort-sharing approaches. In addition, the report discusses possible nationally appropriate mitigation actions (NAMAs) the six countries could take based on the analysis of mitigation options. This report is an output of the project 'Proposals for quantifying emission reduction contributions by emerging economies' by Ecofys and the Wuppertal Institute for the Federal Environment Agency in Dessau. It builds upon earlier joint work ''Proposals for contributions of emerging economies to the climate

  11. CO2 emission reduction potential of large-scale energy efficiency measures in power generation from fossil fuels in China, India, Brazil, Indonesia and South Africa

    OpenAIRE

    Boehme, Benn J.; Krey, Matthias

    2005-01-01

    We quantify the theoretical potential for energy-efficiency CDM projects using best available technology in coal, natural gas or oil fuelled power generation in China, India, Brazil, Indonesia and South Africa, looking at new power plants or retrofit measures. We then discuss the likelihood of the potential emission reductions materialising under CDM. Our results are very sensitive to choices of baseline and project efficiencies and the level of electricity generation from potential emission ...

  12. Process industry energy retrofits: the importance of emission baselines for greenhouse gas reductions

    International Nuclear Information System (INIS)

    Aadahl, Anders; Harvey, Simon; Berntsson, Thore

    2004-01-01

    Fuel combustion for heat and/or electric power production is often the largest contributor of greenhouse gas (GHG) emissions from an industrial process plant. Economically feasible options to reduce these emissions include fuel switching and retrofitting the plant's energy system. Process integration methods and tools can be used to evaluate potential retrofit measures. For assessing the GHG emissions reduction potential for the measures considered, it is also necessary to define appropriate GHG emission baselines. This paper presents a systematic GHG emission calculation method for retrofit situations including improved heat exchange, integration of combined heat and power (CHP) units, and combinations of both. The proposed method is applied to five different industrial processes in order to compare the impact of process specific parameters and energy market specific parameters. For potential GHG emission reductions the results from the applied study reveal that electricity grid emissions are significantly more important than differences between individual processes. Based on the results of the study, it is suggested that for sustainable investment decision considerations a conservative emission baseline is most appropriate. Even so, new industrial CHP in the Northern European energy market could play a significant role in the common effort to decrease GHG emissions

  13. Investigating the Potential of Ridesharing to Reduce Vehicle Emissions

    Directory of Open Access Journals (Sweden)

    Roozbeh Jalali

    2017-06-01

    Full Text Available As urban populations grow, cities need new strategies to maintain a good standard of living while enhancing services and infrastructure development. A key area for improving city operations and spatial layout is the transportation of people and goods. While conventional transportation systems (i.e., fossil fuel based are struggling to serve mobility needs for growing populations, they also represent serious environmental threats. Alternative-fuel vehicles can reduce emissions that contribute to local air pollution and greenhouse gases as mobility needs grow. However, even if alternative-powered vehicles were widely employed, road congestion would still increase. This paper investigates ridesharing as a mobility option to reduce emissions (carbon, particulates and ozone while accommodating growing transportation needs and reducing overall congestion. The potential of ridesharing to reduce carbon emissions from personal vehicles in Changsha, China, is examined by reviewing mobility patterns of approximately 8,900 privately-owned vehicles over two months. Big data analytics identify ridesharing potential among these drivers by grouping vehicles by their trajectory similarity. The approach includes five steps: data preprocessing, trip recognition, feature vector creation, similarity measurement and clustering. Potential reductions in vehicle emissions through ridesharing among a specific group of drivers are calculated and discussed. While the quantitative results of this analysis are specific to the population of Changsha, they provide useful insights for the potential of ridesharing to reduce vehicle emissions and the congestion expected to grow with mobility needs. Within the study area, ridesharing has the potential to reduce total kilometers driven by about 24% assuming a maximum distance between trips less than 10 kilometers, and schedule time less than 60 minutes. For a more conservative maximum trip distance of 2 kilometers and passenger

  14. Scenario Study on PM emission Reduction in Cement Industry

    Science.gov (United States)

    Tang, Qian; Chen, Xiaojun; Xia, Xin; Wang, Lijuan; Wang, Huili; Jin, Ling; Yan, Zhen

    2018-01-01

    Cement industry is one of the high pollution industries in China. Evaluation of the primary particulate matter (PM) emission status and the reduction potential is not only important for our understanding of the effectiveness of current pollution control measures but also vital for future policy design. In this study, PM emitted from cement producing process in 2014 was calculated using an emission factor method. Three PM emission control scenarios were set up considering source control, process management and end-of-pipe treatment, and the PM emission reduction by 2020 under the three scenarios was predicted, respectively. In 2014, the primary PM emission from cement industry was 1.95 million tons. By 2020, the productions of cement and clinker were expected to increase by 12% and 7%, respectively, and the PM emission would increase by about 10%. By implementation of GB4915-2013 and comprehensive control of fugitive PM emission, the PM emission would probably be reduced by 34%. Another 7% decrease would be expected from source control. The second scenario can be considered as an assessment of the effectiveness of the revised emission standard, and this research can be used as a technical support to the environmental management authorities to make relevant policies.

  15. Costs, emissions reductions, and vehicle repair: evidence from Arizona.

    Science.gov (United States)

    Ando, A; McConnell, V; Harrington, W

    2000-04-01

    The Arizona inspection and maintenance (I/M) program provides one of the first opportunities to examine the costs and effectiveness of vehicle emission repair. This paper examines various aspects of emission reductions, fuel economy improvements, and repair costs, drawing data from over 80,000 vehicles that failed the I/M test in Arizona between 1995 and the first half of 1996. We summarize the wealth of data on repair from the Arizona program and highlight its limitations. Because missing or incomplete cost information has been a serious shortcoming for the evaluation of I/M programs, we develop a method for estimating repair costs when they are not reported. We find surprising evidence that almost one quarter of all vehicles that take the I/M test are never observed to pass the test. Using a statistical analysis, we provide some information about the differences between the vehicles that pass and those that do not. Older, more polluting vehicles are much more likely never to pass the I/M test, and their expected repair costs are much higher than those for newer cars. This paper summarizes the evidence on costs and emission reductions in the Arizona program, comparing costs and emissions reductions between cars and trucks. Finally, we examine the potential for more cost-effective repair, first through an analysis of tightening I/M cut points and then by calculating the cost savings of achieving different emission reduction goals when the most cost-effective repairs are made first.

  16. Options for the reduction of gases emissions of greenhouse effect (GEI), Colombia 1998 -2010

    International Nuclear Information System (INIS)

    Rodriguez M, Humberto; Gonzalez B, Fabio

    1999-01-01

    Taking into account the greenhouse gas emissions for Colombia in year 2010, different options for reduction of GHG emissions were considered. Twenty-four options were evaluated from economical and technical points of view, with a total reduction potential of 31.7 M ton/ year of CO 2 equivalent. About 75% of this potential could be developed in the forestry sector and 25% in energy projects. If the proposed measures can to be implemented, the country's emissions will be 143.5 M ton/year of co2 by 2010: this means that Colombia will have lowered its emissions not only to the 1990 level but down to 14% below this level

  17. EMISSIONS REDUCTION DATA FOR GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

    Science.gov (United States)

    This study measured the pollutant emission reduction potential of 29 photovoltaic (PV) systems installed on residential and commercial building rooftops across the U.S. from 1993 through 1997. The U.S. Environmental Protection Agency (EPA) and 21 electric power companies sponsor...

  18. Bioreducer use in blast furnace ironmaking in Finland:techno-economic assessment and CO₂ emission reduction potential

    OpenAIRE

    Suopajärvi, H. (Hannu)

    2015-01-01

    Abstract Most of the steel produced in the world is based on the integrated blast furnace-converter route, which is based on the use of virgin raw materials. Large amounts of fossil-based, carbon containing reductants are used in blast furnaces, which results in carbon dioxide emissions into the atmosphere. Fossil carbon dioxide emissions from steel production can be reduced by new technologies or moving from non-renewable to renewable energy sources. Biomass-based reductants could be one...

  19. Efficiency potentials of heat pumps with combined heat and power. For maximum reduction of CO2 emissions and for electricity generation from fossil fuels with CO2 reduction in Switzerland

    International Nuclear Information System (INIS)

    Rognon, F.

    2005-06-01

    This comprehensive report for the Swiss Federal Office of Energy (SFOE) takes a look at how the efficiency potential of heat pumps together with combined heat and power systems can help provide a maximum reduction of CO 2 emissions and provide electricity generation from fossil fuel in Switzerland together with reductions in CO 2 emissions. In Switzerland, approximately 80% of the low-temperature heat required for space-heating and for the heating-up of hot water is produced by burning combustibles. Around a million gas and oil boilers were in use in Switzerland in 2000, and these accounted for approximately half the country's 41.1 million tonnes of CO 2 emissions. The authors state that there is a more efficient solution with lower CO 2 emissions: the heat pump. With the enormous potential of our environment it would be possible to replace half the total number of boilers in use today with heat pumps. This would be equivalent to 90 PJ p.a. of useful heat, or 500,000 systems. The power source for heat pumps should come from the substitution of electric heating systems (electric resistor-based systems) and from the replacement of boilers. This should be done by using combined heat and power systems with full heat utilisation. This means, according to the authors, that the entire required power source can be provided without the need to construct new electricity production plants. The paper examines and discusses the theoretical, technical, market and realisable potentials

  20. Inventories and reduction scenarios of urban waste-related greenhouse gas emissions for management potential.

    Science.gov (United States)

    Yang, Dewei; Xu, Lingxing; Gao, Xueli; Guo, Qinghai; Huang, Ning

    2018-06-01

    Waste-related greenhouse gas (GHG) emissions have been recognized as one of the prominent contributors to global warming. Current urban waste regulations, however, face increasing challenges from stakeholders' trade-offs and hierarchic management. A combined method, i.e., life cycle inventories and scenario analysis, was employed to investigate waste-related GHG emissions during 1995-2015 and to project future scenarios of waste-driven carbon emissions by 2050 in a pilot low carbon city, Xiamen, China. The process-based carbon analysis of waste generation (prevention and separation), transportation (collection and transfer) and disposal (treatment and recycling) shows that the main contributors of carbon emissions are associated with waste disposal processes, solid waste, the municipal sector and Xiamen Mainland. Significant spatial differences of waste-related CO 2e emissions were observed between Xiamen Island and Xiamen Mainland using the carbon intensity and density indexes. An uptrend of waste-related CO 2e emissions from 2015 to 2050 is identified in the business as usual, waste disposal optimization, waste reduction and the integrated scenario, with mean annual growth rates of 8.86%, 8.42%, 6.90% and 6.61%, respectively. The scenario and sensitivity analysis imply that effective waste-related carbon reduction requires trade-offs among alternative strategies, actions and stakeholders in a feasible plan, and emphasize a priority of waste prevention and collection in Xiamen. Our results could benefit to the future modeling of urban multiple wastes and life-cycle carbon control in similar cities within and beyond China. Copyright © 2018 Elsevier B.V. All rights reserved.

  1. Emissions reductions from expanding state-level renewable portfolio standards.

    Science.gov (United States)

    Johnson, Jeremiah X; Novacheck, Joshua

    2015-05-05

    In the United States, state-level Renewable Portfolio Standards (RPS) have served as key drivers for the development of new renewable energy. This research presents a method to evaluate emissions reductions and costs attributable to new or expanded RPS programs by integrating a comprehensive economic dispatch model and a renewable project selection model. The latter model minimizes incremental RPS costs, accounting for renewable power purchase agreements (PPAs), displaced generation and capacity costs, and net changes to a state's imports and exports. We test this method on potential expansions to Michigan's RPS, evaluating target renewable penetrations of 10% (business as usual or BAU), 20%, 25%, and 40%, with varying times to completion. Relative to the BAU case, these expanded RPS policies reduce the CO2 intensity of generation by 13%, 18%, and 33% by 2035, respectively. SO2 emissions intensity decreased by 13%, 20%, and 34% for each of the three scenarios, while NOx reductions totaled 12%, 17%, and 31%, relative to the BAU case. For CO2 and NOx, absolute reductions in emissions intensity were not as large due to an increasing trend in emissions intensity in the BAU case driven by load growth. Over the study period (2015 to 2035), the absolute CO2 emissions intensity increased by 1% in the 20% RPS case and decreased by 6% and 22% for the 25% and 40% cases, respectively. Between 26% and 31% of the CO2, SO2, and NOx emissions reductions attributable to the expanded RPS occur in neighboring states, underscoring the challenges quantifying local emissions reductions from state-level energy policies with an interconnected grid. Without federal subsidies, the cost of CO2 mitigation using an RPS in Michigan is between $28 and $34/t CO2 when RPS targets are met. The optimal renewable build plan is sensitive to the capacity credit for solar but insensitive to the value for wind power.

  2. Achieving CO2 Emissions Reduction Goals with Energy Infrastructure Projects

    International Nuclear Information System (INIS)

    Eberlinc, M.; Medved, K.; Simic, J.

    2013-01-01

    The EU has set its short-term goals in the Europe 2020 Strategy (20% of CO 2 emissions reduction, 20% increase in energy efficiency, 20% share of renewables in final energy). The analyses show that the EU Member States in general are on the right track of achieving these goals; they are even ahead (including Slovenia). But setting long-term goals by 2050 is a tougher challenge. Achieving CO 2 emissions reduction goes hand in hand with increasing the share of renewables and strategically planning the projects, which include exploiting the potential of renewable sources of energy (e.g. hydropower). In Slovenia, the expected share of hydropower in electricity production from large HPPs in the share of renewables by 2030 is 1/3. The paper includes a presentation of a hydro power plants project on the middle Sava river in Slovenia and its specifics (influenced by the expansion of the Natura 2000 protected sites and on the other hand by the changes in the Environment Protection Law, which implements the EU Industrial Emissions Directive and the ETS Directive). Studies show the importance of the HPPs in terms of CO 2 emissions reduction. The main conclusion of the paper shows the importance of energy infrastructure projects, which contribute to on the one hand the CO 2 emissions reduction and on the other the increase of renewables.(author)

  3. Research on CO2 Emission Reduction Mechanism of China’s Iron and Steel Industry under Various Emission Reduction Policies

    Directory of Open Access Journals (Sweden)

    Ye Duan

    2017-12-01

    Full Text Available In this paper, a two-stage dynamic game model of China’s iron and steel industry is constructed. Carbon tax levy, product subsidy, carbon capture and sequestration (CCS and other factors are included in the emission reduction mechanism. The effects of emissions reduction and the economic impact of China’s overall steel industry (and that of its six main regions are investigated for the first time under different scenarios. As new findings, we report the following: (1 Not all factors declined. The overall social welfare, consumer surplus, output and emissions decrease with a gradual increase in the reduction target, whereas the carbon tax value, unit value of product subsidies and total subsidies show a rising trend; (2 A combination of multiple emissions reduction policies is more effective than a single policy. With the implementation of a combined policy, regional output polarization has eased; (3 Steel output does not exceed 950 million tons, far below the current peak. These results will help the industry to formulate reasonable emissions reduction and output targets. In short, in effort to eliminate industry poverty and to alleviate overcapacity, the industry should not only adopt the various coordinated reduction policies, but also fully consider regional differences and reduction needs.

  4. Climate and Health Impacts of US Emissions Reductions Consistent with 2 C

    Science.gov (United States)

    Shindell, Drew T.; Lee, Yunha; Faluvegi, Greg

    2016-01-01

    An emissions trajectory for the US consistent with 2 C warming would require marked societal changes, making it crucial to understand the associated benefits. Previous studies have examined technological potentials and implementation costs and public health benefits have been quantified for less-aggressive potential emissions-reduction policies, but researchers have not yet fully explored the multiple benefits of reductions consistent with 2 C. We examine the impacts of such highly ambitious scenarios for clean energy and vehicles. US transportation emissions reductions avoid approx.0.03 C global warming in 2030 (0.15 C in 2100), whereas energy emissions reductions avoid approx.0.05-0.07 C 2030 warming (approx.0.25 C in 2100). Nationally, however, clean energy policies produce climate disbenefits including warmer summers (although these would be eliminated by the remote effects of similar policies if they were undertaken elsewhere). The policies also greatly reduce damaging ambient particulate matter and ozone. By 2030, clean energy policies could prevent approx.175,000 premature deaths, with approx.22,000 (11,000-96,000; 95% confidence) fewer annually thereafter, whereas clean transportation could prevent approx.120,000 premature deaths and approx.14,000 (9,000-52,000) annually thereafter. Near-term national benefits are valued at approx.US$250 billion (140 billion to 1,050billion) per year, which is likely to exceed implementation costs. Including longer-term, worldwide climate impacts, benefits roughly quintuple, becoming approx.5-10 times larger than estimated implementation costs. Achieving the benefits, however, would require both larger and broader emissions reductions than those in current legislation or regulations.

  5. Potential effects of emission taxes on CO2 emissions in the OECD and LDCs

    International Nuclear Information System (INIS)

    Messner, S.; Strubegger, M.

    1991-01-01

    A set of existing optimization models, which represent the energy systems of the OECD and LDCs (less developed countries excluding centrally planned economies) with a time horizon to 2020, has been applied to derive first-order estimates of the techno-economic potential for emission reduction. The driving force for the introduction of reduction measures is a scheme of taxes levied on the emission of six pollutants, including the greenhouse gases CO 2 and methane. The tax levels introduced are based on taxes discussed by the Swedish government: they are the break-even point to test which measures are cost-effective and which emission levels can be reached at these costs. The regional models include the following alternatives: (i) reduction of final energy demand by supplying the requested services by other means (i.e., conservation); (ii) substitution of new fuels for polluting fuels; (iii) introduction of clean technologies for the same purposes; (iv) additions of pollution-reduction technologies. Alternative scenarios with emission taxes are compared with a base scenario without taxes related to pollutant emissions. The results indicate that an increase in CO 2 emissions in the OECD and LDC regions of 47% over the next 30 yr in the base scenario would be changed to stable levels to 2010 by tax-induced measures. Thereafter, energy-consumption growth in the LDCs reverses this trend. (author)

  6. Assessing the Potential of Utilization and Storage Strategies for Post-Combustion CO2 Emissions Reduction

    International Nuclear Information System (INIS)

    Armstrong, Katy; Styring, Peter

    2015-01-01

    The emissions reduction potential of three carbon dioxide handling strategies for post-combustion capture is considered. These are carbon capture and sequestration/storage (CCS), enhanced hydrocarbon recovery (EHR), and carbon dioxide utilization (CDU) to produce synthetic oil. This is performed using common and comparable boundary conditions including net CO 2 sequestered based on equivalent boundary conditions. This is achieved using a “cradle to grave approach” where the final destination and fate of any product is considered. The input boundary is pure CO 2 that has been produced using a post-combustion capture process as this is common between all processes. The output boundary is the emissions resulting from any product produced with the assumption that the majority of the oil will go to combustion processes. We also consider the “cradle to gate” approach where the ultimate fate of the oil is not considered as this is a boundary condition often applied to EHR processes. Results show that while CCS can make an impact on CO 2 emissions, CDU will have a comparable effect whilst generating income while EHR will ultimately increase net emissions. The global capacity for CDU is also compared against CCS using data based on current and planned CCS projects. Analysis shows that current CDU represent a greater volume of capture than CCS processes and that this gap is likely to remain well beyond 2020 which is the limit of the CCS projects in the database.

  7. Role of natural gas in meeting an electric sector emissions reduction strategy and effects on greenhouse gas emissions

    International Nuclear Information System (INIS)

    Lenox, Carol; Kaplan, P. Ozge

    2016-01-01

    With advances in natural gas extraction technologies, there is an increase in the availability of domestic natural gas, and natural gas is gaining a larger share of use as a fuel in electricity production. At the power plant, natural gas is a cleaner burning fuel than coal, but uncertainties exist in the amount of methane leakage occurring upstream in the extraction and production of natural gas. At higher leakage levels, the additional methane emissions could offset the carbon dioxide emissions reduction benefit of switching from coal to natural gas. This analysis uses the MARKAL linear optimization model to compare the carbon emissions profiles and system-wide global warming potential of the U.S. energy system over a series of model runs in which the power sector is required to meet a specific carbon dioxide reduction target across a number of scenarios in which the availability of natural gas changes. Scenarios are run with carbon dioxide emissions and a range of upstream methane emission leakage rates from natural gas production along with upstream methane and carbon dioxide emissions associated with production of coal and oil. While the system carbon dioxide emissions are reduced in most scenarios, total carbon dioxide equivalent emissions show an increase in scenarios in which natural gas prices remain low and, simultaneously, methane emissions from natural gas production are higher. - Highlights: • MARKAL analysis of energy system GHG emissions reduction scenarios. • High methane leakage can eliminate the benefit that natural gas brings over coal. • A robust GHG reduction strategy takes into account upstream emissions for all fuels.

  8. Assessment of the Greenhouse Gas Emission Reduction Potential of Ultra-Clean Hybrid-Electric Vehicles

    OpenAIRE

    Burke, A.F.; Miller, M.

    1997-01-01

    The study focused on the emission reduction and fuel economy benefits of the application of hybrid/electric powertrain technology to tight-duty vehicles (mid-size and compact passenger cars). The approach taken was to calculate the exhaust emissions (gm/mi) energy use (Wh/mi and mpg) for a wide range of vehicle designs (steel and light-weight materials), engines, energy storage devices, control strategies, and driving cycles using two vehicle simulation programs (SIMPLEV and AVTE). The full f...

  9. Impact of trade in emission reduction credits on solar projects

    International Nuclear Information System (INIS)

    Kulkarni, P.

    1993-01-01

    Since the amendment of the Clean Air Act in 1990, the possibility of trading in Emission Reduction Credits has been looked upon as a strategy for improving the economic feasibility of solar projects. This paper discusses developments towards such a market and reviews current and proposed emission trading practices. The paper analyzes how the current characteristics of the market help or hinder the trading of credits generated by solar projects, and suggests possible solutions. Emission credits from four different solar projects and their trading potentials are presented

  10. Assessing Multiple Pathways for Achieving China’s National Emissions Reduction Target

    Directory of Open Access Journals (Sweden)

    Mingyue Wang

    2018-06-01

    Full Text Available In order to achieve China’s target of carbon intensity emissions reduction in 2030, there is a need to identify a scientific pathway and feasible strategies. In this study, we used stochastic frontier analysis method of energy efficiency, incorporating energy structure, economic structure, human capital, capital stock and potential energy efficiency to identify an efficient pathway for achieving emissions reduction target. We set up 96 scenarios including single factor scenarios and multi-factors combination scenarios for the simulation. The effects of each scenario on achieving the carbon intensity reduction target are then evaluated. It is found that: (1 Potential energy efficiency has the greatest contribution to the carbon intensity emissions reduction target; (2 they are unlikely to reach the 2030 carbon intensity reduction target of 60% by only optimizing a single factor; (3 in order to achieve the 2030 target, several aspects have to be adjusted: the fossil fuel ratio must be lower than 80%, and its average growth rate must be decreased by 2.2%; the service sector ratio in GDP must be higher than 58.3%, while the growth rate of non-service sectors must be lowered by 2.4%; and both human capital and capital stock must achieve and maintain a stable growth rate and a 1% increase annually in energy efficiency. Finally, the specific recommendations of this research were discussed, including constantly improved energy efficiency; the upgrading of China’s industrial structure must be accelerated; emissions reduction must be done at the root of energy sources; multi-level input mechanisms in overall levels of education and training to cultivate the human capital stock must be established; investment in emerging equipment and accelerate the closure of backward production capacity to accumulate capital stock.

  11. NEC-2020 emission reduction scenarios

    DEFF Research Database (Denmark)

    Slentø, Erik; Nielsen, Ole-Kenneth; Hoffmann, Leif

    The upcoming NEC-2020 EU directive sets up emission ceilings for NOX, SO2, NH3, NMVOC and PM in order to meet the environmental exposure targets of the Thematic Strategy. This report contains an assessment of intermediary emission reduction scenarios for Denmark, computed by the GAINS model 2007,......, which serves as the basis for the pending negotiations in EU. The assessment is brought up to date by including a brief evaluation of the new reduction scenarios published in 2008, founding the European Commission NEC-2020 directive proposal....

  12. Scenarios of high greenhouse gas emission reduction in transports and buildings by 2050

    International Nuclear Information System (INIS)

    Teissier, O.; Meunier, L.

    2008-01-01

    The authors report simulations of different environmental policy measures concerning transports and buildings in France. First, they review measures which may entail a reduction of greenhouse gas emissions, and comment their emission reduction potential and their implementation costs. These measures are then ranked, and only those presenting a significant potential and an economically and technologically feasibility are finally considered. Their impact is then simulated by using different models which are adapted to the both sectors and to time ranges. The obtained results are compared to those obtained with a calibrated trend scenario and with a 'factor 4' scenario

  13. Methane emission reduction: an application of FUND

    NARCIS (Netherlands)

    Tol, R.S.J.; Heintz, R.J.; Lammers, P.E.M.

    2003-01-01

    Methane is, after carbon dioxide, the most important anthropogenic greenhouse gas. Governments plan to abate methane emissions. A crude set of estimates of reduction costs is included in FUND, an integrated assessment model of climate change. In a cost-benefit analysis, methane emission reduction is

  14. Reduction of CO{sub 2} emission and oil dependency with biomass-based polygeneration

    Energy Technology Data Exchange (ETDEWEB)

    Joelsson, Jonas M; Gustavsson, Leif [Ecotechnology and Environmental Science, Department of Engineering and Sustainable Development, Mid Sweden University, SE-831 25 Oestersund (Sweden)

    2010-07-15

    We compare different options for the use of lignocellulosic biomass to reduce CO{sub 2} emission and oil use, focusing on polygeneration of biomass-based motor fuels and electricity, and discuss methodological issues related to such comparisons. The use of biomass can significantly reduce CO{sub 2} emission and oil use, but there is a trade-off between the reductions in CO{sub 2} emission and oil use. Bioelectricity from stand-alone plants replacing coal-based electricity reduced CO{sub 2} emission by 99 kg per GJ biomass input but gave no oil use reduction. Stand-alone produced methanol replacing diesel reduced the CO{sub 2} emission with 38 kg and the oil use with 0.67 GJ per GJ biomass, indicating that a potential CO{sub 2} emission reduction of 90 kg is lost per GJ oil reduced. CO{sub 2} emission and oil use reduction for alternatives co-producing fuel and electricity fall between the stand-alone alternatives. Plug-in hybrid-electric vehicles using bioelectricity reduced CO{sub 2} emission by 75-88 kg and oil use by 0.99-1.2 GJ, per GJ biomass input. Biomass can also reduce CO{sub 2} emission and/or oil use more efficiently if fossil-fuel-fired boilers or electric heating is replaced by district heating from biomass-based combined heat and power generation. This is also true if electricity or motor fuel is produced from black liquor gasification in pulp mills or if wood is used instead of concrete in building construction. Biomass gasification is an important technology to achieve large reductions, irrespective of whether CO{sub 2} emission or oil use reduction is prioritised. (author)

  15. Survey of current Swiss pig feeding practices and potential for ammonia emission reduction

    OpenAIRE

    Spring, P.; Bracher, A.

    2017-01-01

    Controlling potentially harmful and polluting emissions from farms is important in the developed world, where legislation exists in many countries limiting emissions such as ammonia and controlling how manure is disposed of from intensive farming operations. In Switzerland, there are legal agreements concerning controls of ammonia emissions, most especially from farms. Ammonia production from pig farms can be controlled by dietary intervention, such as reducing protein levels, which in turn r...

  16. Electricity production from biogas in Serbia: Assessment of emissions reduction

    Directory of Open Access Journals (Sweden)

    Cvetković Slobodan M.

    2016-01-01

    Full Text Available Biogas represents a promising source for the production of clean energy. The objective of this paper was to quantify the potential for the reduction of emissions to the environment during the production of electricity from biogas in comparison with environmental effects of the production of the same amount of electricity from fossil resources (coal from Kolubara basin and natural gas. Basis for comparison of environmental impacts in this work was the annual production of electricity in biogas plants of the total capacity of 80 MW. This study has shown that the annual production of electricity from biogas power plants of 80 MW results in: substitution of up to 840 kt of coal from Kolubara basin and 123.2 million m3 of natural gas; reduction in emissions of greenhouse gases in the range of 491.16 kt - 604.97 kt CO2-eq, depending on the energy efficiency of the process of electricity production from biogas; reduction in emissions of greenhouse gases up to 92.37 kt CO2-eq compared to the use of natural gas for electricity generation.

  17. Post-2012 climate regime. How industrial and developing nations can help to reduce emissions - assessing emission trends, reduction potentials, incentive systems and negotiation options

    Energy Technology Data Exchange (ETDEWEB)

    Duscha, Vicki; Graichen, Jakob; Healy, Sean; Schleich, Joachim; Schumacher, Katja [Oeko-Institut e.V., Berlin (Germany); Fraunhofer-Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

    2010-06-15

    This report analyses the emissions reduction targets submitted under the Copenhagen Accord by developed and developing countries in matters of four key questions: - Do the pledges add up to the emission reductions required necessary by science? - What are the costs associated with meeting the given targets? - Are the proposed emission reduction efforts of Annex I parties comparable? - What would comparable efforts look like taking country-specific socio-economic indicators into account? Secondary to these questions this report explores the economic and environmental implications of the submitted pledges and NAMAs. Furthermore, we analyze and assess the comparability of efforts of Annex I mitigation pledges compared to a range of socio-economic indicators that may provide a basis for a ''fair'' effort sharing agreement to achieve a given target. (orig.)

  18. [Research on carbon reduction potential of electric vehicles for low-carbon transportation and its influencing factors].

    Science.gov (United States)

    Shi, Xiao-Qing; Li, Xiao-Nuo; Yang, Jian-Xin

    2013-01-01

    Transportation is the key industry of urban energy consumption and carbon emissions. The transformation of conventional gasoline vehicles to new energy vehicles is an important initiative to realize the goal of developing low-carbon city through energy saving and emissions reduction, while electric vehicles (EV) will play an important role in this transition due to their advantage in energy saving and lower carbon emissions. After reviewing the existing researches on energy saving and emissions reduction of electric vehicles, this paper analyzed the factors affecting carbon emissions reduction. Combining with electric vehicles promotion program in Beijing, the paper analyzed carbon emissions and reduction potential of electric vehicles in six scenarios using the optimized energy consumption related carbon emissions model from the perspective of fuel life cycle. The scenarios included power energy structure, fuel type (energy consumption per 100 km), car type (CO2 emission factor of fuel), urban traffic conditions (speed), coal-power technologies and battery type (weight, energy efficiency). The results showed that the optimized model was able to estimate carbon emissions caused by fuel consumption more reasonably; electric vehicles had an obvious restrictive carbon reduction potential with the fluctuation of 57%-81.2% in the analysis of six influencing factors, while power energy structure and coal-power technologies play decisive roles in life-cycle carbon emissions of electric vehicles with the reduction potential of 78.1% and 81.2%, respectively. Finally, some optimized measures were proposed to reduce transport energy consumption and carbon emissions during electric vehicles promotion including improving energy structure and coal technology, popularizing energy saving technologies and electric vehicles, accelerating the battery R&D and so on. The research provides scientific basis and methods for the policy development for the transition of new energy vehicles

  19. Assessing the Potential of Utilization and Storage Strategies for Post-Combustion CO{sub 2} Emissions Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Katy; Styring, Peter, E-mail: p.styring@sheffield.ac.uk [UK Centre for Carbon Dioxide Utilization, Department of Chemical and Biological Engineering, The University of Sheffield, Sheffield (United Kingdom)

    2015-03-03

    The emissions reduction potential of three carbon dioxide handling strategies for post-combustion capture is considered. These are carbon capture and sequestration/storage (CCS), enhanced hydrocarbon recovery (EHR), and carbon dioxide utilization (CDU) to produce synthetic oil. This is performed using common and comparable boundary conditions including net CO{sub 2} sequestered based on equivalent boundary conditions. This is achieved using a “cradle to grave approach” where the final destination and fate of any product is considered. The input boundary is pure CO{sub 2} that has been produced using a post-combustion capture process as this is common between all processes. The output boundary is the emissions resulting from any product produced with the assumption that the majority of the oil will go to combustion processes. We also consider the “cradle to gate” approach where the ultimate fate of the oil is not considered as this is a boundary condition often applied to EHR processes. Results show that while CCS can make an impact on CO{sub 2} emissions, CDU will have a comparable effect whilst generating income while EHR will ultimately increase net emissions. The global capacity for CDU is also compared against CCS using data based on current and planned CCS projects. Analysis shows that current CDU represent a greater volume of capture than CCS processes and that this gap is likely to remain well beyond 2020 which is the limit of the CCS projects in the database.

  20. Investment Strategy of Emission-Reduction Technology in a Supply Chain

    Directory of Open Access Journals (Sweden)

    Gao Xiang Lou

    2015-08-01

    Full Text Available Greenhouse gas emissions have serious impacts on the natural environment. Therefore, the restrictions imposed on carbon emission force enterprises to take carbon emission into consideration when making production decisions. In this paper, in the context of allowing emission trading and investment of emission reduction technology, models were presented for a two-stage supply chain to analyze the optimal investment and pricing decisions. The results indicate that manufacturer’s endurance capacity of reduction difficulty is higher in the cooperation model than in the Stackelberg game model, and that perfect coordination of supply chains can be realized by a revenue sharing contract. From the perspective of a consumer, low-carbon products mean higher price, so that subsidies or tax exemptions should be provided to keep low prices. Meanwhile, the government can promote investment in emission-reduction technologies and achieve its emission reduction targets by controlling emission trading price, strengthening emission reduction publicity and providing technology investment subsidies.

  1. Investigation of CO2 emission reduction strategy from in-use gasoline vehicle

    Science.gov (United States)

    Choudhary, Arti; Gokhale, Sharad

    2016-04-01

    On road transport emissions is kicking off in Indian cities due to high levels of urbanization and economic growth during the last decade in Indian subcontinent. In 1951, about 17% of India's population were living in urban areas that increased to 32% in 2011. Currently, India is fourth largest Green House Gas (GHG) emitter in the world, with its transport sector being the second largest contributor of CO2 emissions. For achieving prospective carbon reduction targets, substantial opportunity among in-use vehicle is necessary to quantify. Since, urban traffic flow and operating condition has significant impact on exhaust emission (Choudhary and Gokhale, 2016). This study examined the influence of vehicular operating kinetics on CO2 emission from predominant private transportation vehicles of Indian metropolitan city, Guwahati. On-board instantaneous data were used to quantify the impact of CO2 emission on different mileage passenger cars and auto-rickshaws at different times of the day. Further study investigates CO2 emission reduction strategies by using International Vehicle Emission (IVE) model to improve co-benefit in private transportation by integrated effort such as gradual phase-out of inefficient vehicle and low carbon fuel. The analysis suggests that fuel type, vehicles maintenance and traffic flow management have potential for reduction of urban sector GHG emissions. Keywords: private transportation, CO2, instantaneous emission, IVE model Reference Choudhary, A., Gokhale, S. (2016). Urban real-world driving traffic emissions during interruption and congestion. Transportation Research Part D: Transport and Environment 43: 59-70.

  2. Achieving deep reductions in US transport greenhouse gas emissions: Scenario analysis and policy implications

    International Nuclear Information System (INIS)

    McCollum, David; Yang, Christopher

    2009-01-01

    This paper investigates the potential for making deep cuts in US transportation greenhouse gas (GHG) emissions in the long-term (50-80% below 1990 levels by 2050). Scenarios are used to envision how such a significant decarbonization might be achieved through the application of advanced vehicle technologies and fuels, and various options for behavioral change. A Kaya framework that decomposes GHG emissions into the product of four major drivers is used to analyze emissions and mitigation options. In contrast to most previous studies, a relatively simple, easily adaptable modeling methodology is used which can incorporate insights from other modeling studies and organize them in a way that is easy for policymakers to understand. Also, a wider range of transportation subsectors is considered here-light- and heavy-duty vehicles, aviation, rail, marine, agriculture, off-road, and construction. This analysis investigates scenarios with multiple options (increased efficiency, lower-carbon fuels, and travel demand management) across the various subsectors and confirms the notion that there are no 'silver bullet' strategies for making deep cuts in transport GHGs. If substantial emission reductions are to be made, considerable action is needed on all fronts, and no subsectors can be ignored. Light-duty vehicles offer the greatest potential for emission reductions; however, while deep reductions in other subsectors are also possible, there are more limitations in the types of fuels and propulsion systems that can be used. In all cases travel demand management strategies are critical; deep emission cuts will not likely be possible without slowing growth in travel demand across all modes. Even though these scenarios represent only a small subset of the potential futures in which deep reductions might be achieved, they provide a sense of the magnitude of changes required in our transportation system and the need for early and aggressive action if long-term targets are to be met.

  3. Potential effects of emission taxes on CO2 emissions in OECD and LDC countries. Working paper

    International Nuclear Information System (INIS)

    Messner, S.; Strubegger, M.

    1990-12-01

    A set of existing optimization models representing the energy systems of the OECD and LDC countries (the LDC region covers all less developed countries excluding centrally planned economies) with a time horizon up to 2020 was applied to derive first-order estimates of the techno-economic potential for emission reduction. The driving force for the introduction of reduction measures was a scheme of taxes levied on the emissions of 6 relevant pollutants-including the greenhouse gases CO 2 and methane. The tax levels introduced are based on the taxes discussed by the Swedish government administration; they are the break-even point to test which measures are cost-effective and which emission levels can be reached at these costs. The regional models offer the choice between the following alternatives as response to increases in expenditures caused by emission taxes: (*) Reduction of final energy demand by supplying the requested services by other means (i.e., conservation). (*) Substitution of 'dirty' fuels by fuels entailing less pollution. (*) Introduction of 'clean' technologies for the same purposes (e.g., a combined cycle based on coal gasification is a much cleaner process for electricity generation from coal than conventional coal power plants). (*) For SO 2 and NO x emissions pollution reduction technologies (i.e., scrubbers and catalysts) can be added to existing technologies in order to reduce emissions. Alternative scenarios with emission taxes are compared to a base scenario without taxes related to pollutant emissions. The results indicate that an increase in CO 2 emissions in the OECD and LDC regions of 47% over the next 30 years in the base scenario would be changed into stabilization up to 2010 by measures induced by the tax levels introduced. Thereafter, however, energy consumption growth in the LDC area, in conjunction with the exhaustion of economically viable emission reduction measures, reverse this trend: CO 2 emissions start to increase again after

  4. Initial scoping of GHG emissions trading potential in Alberta : CABREE discussion paper

    International Nuclear Information System (INIS)

    Armstrong, R.

    2002-03-01

    The past five years have seen the emergence of the concept of emissions trading for greenhouse gases, which would make possible a reduction of the costs required to meet emissions targets agreed upon under the Kyoto Protocol. Emissions trading potential and initial scoping in Alberta is examined in this document, with a special emphasis placed on greenhouse gases. The design of a system, encompassing the theory underlying the mechanism, the current developments, issues of importance in this context, as well as the potential for inclusion of other sectors in Alberta were also discussed. For the purpose of this document, emissions trading was defined as one party reducing its emissions levels then transferring the ownership of that reduction to another party who can then purchase this reduction to assist in meeting its own emissions target. Emission trading can be divided into two basic types called Cap and Trade, and Baseline and Credit. Market creation and behaviour, and regulatory behaviour are factors that can render a trading system more feasible. It is important to analyze the goals before designing the specifics of the system. The incorporation of the various sectors of the economy of Alberta would be affected by their unique features. The greatest promise for emissions trading in Alberta is shown by the energy sector. The percentage of emissions covered, the number of participants, the economic effectiveness are all criteria that affect the performance of any system. figs

  5. Potential for reducing global carbon emissions from electricity production-A benchmarking analysis

    International Nuclear Information System (INIS)

    Ang, B.W.; Zhou, P.; Tay, L.P.

    2011-01-01

    We present five performance indicators for electricity generation for 129 countries using the 2005 data. These indicators, measured at the national level, are the aggregate CO 2 intensity of electricity production, the efficiencies of coal, oil and gas generation and the share of electricity produced from non-fossil fuels. We conduct a study on the potential for reducing global energy-related CO 2 emissions from electricity production through simple benchmarking. This is performed based on the last four performance indicators and the construction of a cumulative curve for each of these indicators. It is found that global CO 2 emissions from electricity production would be reduced by 19% if all these indicators are benchmarked at the 50th percentile. Not surprisingly, the emission reduction potential measured in absolute terms is the highest for large countries such as China, India, Russia and the United States. When the potential is expressed as a percentage of a country's own emissions, few of these countries appear in the top-five list. - Research highlights: → We study variations in emissions per kWh of electricity generated among countries. → We analyze emissions from electricity production through benchmarking. → Estimates of reduction in emissions are made based on different assumptions.

  6. Greenhouse gas and air pollutant emission reduction potentials of renewable energy--case studies on photovoltaic and wind power introduction considering interactions among technologies in Taiwan.

    Science.gov (United States)

    Kuo, Yu-Ming; Fukushima, Yasuhiro

    2009-03-01

    To achieve higher energy security and lower emission of greenhouse gases (GHGs) and pollutants, the development of renewable energy has attracted much attention in Taiwan. In addition to its contribution to the enhancement of reliable indigenous resources, the introduction of renewable energy such as photovoltaic (PV) and wind power systems reduces the emission of GHGs and air pollutants by substituting a part of the carbon- and pollutant-intensive power with power generated by methods that are cleaner and less carbon-intensive. To evaluate the reduction potentials, consequential changes in the operation of different types of existing power plants have to be taken into account. In this study, a linear mathematical programming model is constructed to simulate a power mix for a given power demand in a power market sharing a cost-minimization objective. By applying the model, the emission reduction potentials of capacity extension case studies, including the enhancement of PV and wind power introduction at different scales, were assessed. In particular, the consequences of power mix changes in carbon dioxide, nitrogen oxides, sulfur oxides, and particulates were discussed. Seasonally varying power demand levels, solar irradiation, and wind strength were taken into account. In this study, we have found that the synergetic reduction of carbon dioxide emission induced by PV and wind power introduction occurs under a certain level of additional installed capacity. Investigation of a greater variety of case studies on scenario development with emerging power sources becomes possible by applying the model developed in this study.

  7. A carbon emissions reduction index: Integrating the volume and allocation of regional emissions

    International Nuclear Information System (INIS)

    Chen, Jiandong; Cheng, Shulei; Song, Malin; Wu, Yinyin

    2016-01-01

    Highlights: • We build a carbon emissions reduction index (CERI). • The aim is to quantify the pressure on policymakers to reduce emissions. • Scale-related effects and carbon emissions allocations are included in the CERI. • Different standards of carbon emissions allocations are also considered. • We decompose the Gini coefficient to evaluate the effects of three factors. - Abstract: Given the acceleration of global warming and rising greenhouse gas emissions, all countries are facing the harsh reality of the need to reduce carbon emissions. In this study, we propose an index to quantify the pressure faced by policymakers to reduce such emissions, termed the carbon emissions reduction index. This index allows us to observe the effect of carbon emissions volume on the pressure faced by policymakers and study the impact of optimizing interregional carbon emissions on reducing this pressure. In addition, we account for several carbon emissions standards in constructing the index. We conclude that the variation in the index is likely to be attributable to carbon emissions volume, regional ranking, and population (population can also be replaced by GDP, resource endowment, or other factors). In addition, based on empirical data on the world’s largest emitter of carbon dioxide (China), this study analyzes the evolution of pressure to reduce emissions on a country’s policymakers. The results show that the growing volume and unsuitable allocation of carbon emissions from 1997 to 2012 imposed increasing pressure on the Chinese government in this regard. In addition, reductions in carbon emissions volume and regional ranking are primary factors that impact pressure on policymakers.

  8. National environmental targets and international emission reduction instruments

    International Nuclear Information System (INIS)

    Morthorst, P.E.

    2003-01-01

    According to the agreed burden sharing within the European Union the overall EU emission reduction target as agreed by in the Kyoto protocol is converted into national greenhouse gas reduction-targets for each of the member states. In parallel with national emission reduction initiatives common EU policies for emission reductions are considered. Currently discussed is the introduction of a market for tradable permits for CO 2 -emissions to achieve emission reductions within the power industry and other energy intensive industries. In parallel with this markets for green certificates to deploy renewable energy technologies seem to be appearing in a number of countries, among these Denmark, Italy, Sweden, Belgium (Flanders), England and Australia. Although these national initiatives for a green certificate market are fairly different, they could be a starting point for establishing a common EU certificate market. But interactions between national targets for greenhouse gas emissions and these international instruments for emission reduction are not a trivial matter, especially not seen in relation to the possible contributions of these instruments in achieving national GHG-reduction targets. The paper is split into three parts all taking a liberalised power market as starting point: The first part discusses the consequences of a general deployment of renewable energy technologies, using planning initiatives or national promotion schemes (feed-in tariffs). In the second part an international green certificate market is introduced into the liberalised power market context, substituting other national promotion schemes. Finally, in the third part a combination of an international green certificate market (TGC) and an international emission-trading scheme for CO 2 is analysed within the liberalised international power market set-up. The main conclusion is that neither the use of national renewable support schemes nor the introduction of a TGC-market into a liberalised

  9. Global warming and its implication to emission reduction strategies for residential buildings

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiaoming; Chen, Dong; Ren, Zhengen [CSIRO Climate Adaptation Flagship and CSIRO Ecosystem Sciences, Commonwealth Scientific and Industrial Research Organisation (CSIRO), P.O. Box 56, Graham Road, Highett, Victoria 3190 (Australia)

    2011-04-15

    Carbon emission reduction schemes by improving residential building energy performance are often developed and assessed upon the assumption of current or stationary climates. This study investigated the heating and cooling (H-C) energy requirements and corresponding carbon emissions of residential houses in different climatic conditions in relation to global warming. This included assessing and quantifying the efficacy of emission reduction schemes based on emission reduction capacity (ERC). ERC represents the percentage of projected carbon emission reduction under changing climate in a specific year compared to the expected reduction by a scheme at current or stationary climates. It is shown that in a heating-dominated region with a cold climate or temperate climate with cold winter, ERC is projected to increase (or the projected emission reduction is higher than the expected reduction under the emission reduction scheme) in the presence of global warming. In contrast, in a cooling-dominated region with a hot dry or hot humid climate or an H-C balanced temperate climate, ERC is projected to decline. This implies that emission reductions will be lower than those initially targeted by the emission reduction scheme without consideration of global warming. Additionally, to reflect the changing carbon emission over years due to climate change, the average emission reduction capacity (AERC) was also proposed for the assessment of reduction schemes. It was concluded that the design and assessment of carbon emission reduction schemes for residential buildings need to move beyond its assumptions of a current or stationary climate to take into account climate change impacts. (author)

  10. Carbon Dioxide Emissions Reduction Estimates: Potential Use of ...

    African Journals Online (AJOL)

    User

    Where PEy = Project emissions in year y (tCO2e), TCPJ, x, y = Total consumption of fuel type x in ... for fuel type x (gCO2 per liter), EFCH4, x = CH4 emission factor for fuel type x ..... Mechanical Engineers, Part A: Journal of Power and Energy.

  11. Can environmental innovation facilitate carbon emissions reduction? Evidence from China

    International Nuclear Information System (INIS)

    Zhang, Yue-Jun; Peng, Yu-Lu; Ma, Chao-Qun; Shen, Bo

    2017-01-01

    Environmental innovation has been recognized as an efficient way of addressing environmental problems. However, how environmental innovation may affect carbon emissions in China and whether the effect may differ among various environmental innovation variables remain to be investigated. Therefore, based on the panel data of China’s 30 provinces during 2000–2013, we use a system generalized method of moments (SGMM) technique to estimate the effect of environmental innovation on carbon emissions in China. Also, we evaluate the effect on carbon emission reduction of China’s initial carbon emissions trading (CET) scheme. Empirical results indicate that, most environmental innovation measures in China reduce carbon emissions effectively. Among the various environmental innovation factors, energy efficiency exerts the most evident effect on carbon emissions abatement in China; meanwhile, resources for innovation and knowledge innovation also play prominent roles in this regard. However, the impact of governmental environmental policies on curbing carbon emissions reduction suffers from a lag effect, which mainly occurred during 2006–2013. Finally, despite the short time of operation and incomplete market mechanism, the pilot CET in China has appeared relatively promising with regard to carbon emissions reduction. - Highlights: • The SGMM is used for the effect of environmental innovation on carbon emissions. • Energy efficiency proves the most effective way to reduce China’s carbon emissions. • Innovation resources and knowledge innovation are conducive for carbon reduction. • The governmental environmental policies have lag effect on carbon reduction. • The effect of China’s initial CET on carbon emissions reduction has appeared.

  12. Emissions of CO2 from road freight transport in London: Trends and policies for long run reductions

    International Nuclear Information System (INIS)

    Zanni, Alberto M.; Bristow, Abigail L.

    2010-01-01

    Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO 2 emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO 2 emissions reduction targets to be met.

  13. The ranking of negative-cost emissions reduction measures

    International Nuclear Information System (INIS)

    Taylor, Simon

    2012-01-01

    A flaw has been identified in the calculation of the cost-effectiveness in marginal abatement cost curves (MACCs). The problem affects “negative-cost” emissions reduction measures—those that produce a return on investment. The resulting ranking sometimes favours measures that produce low emissions savings and is therefore unreliable. The issue is important because incorrect ranking means a potential failure to achieve the best-value outcome. A simple mathematical analysis shows that not only is the standard cost-effectiveness calculation inadequate for ranking negative-cost measures, but there is no possible replacement that satisfies reasonable requirements. Furthermore, the concept of negative cost-effectiveness is found to be unsound and its use should be avoided. Among other things, this means that MACCs are unsuitable for ranking negative-cost measures. As a result, MACCs produced by a range of organizations including UK government departments may need to be revised. An alternative partial ranking method has been devised by making use of Pareto optimization. The outcome can be presented as a stacked bar chart that indicates both the preferred ordering and the total emissions saving available for each measure without specifying a cost-effectiveness. - Highlights: ► Marginal abatement cost curves (MACCs) are used to rank emission reduction measures. ► There is a flaw in the standard ranking method for negative-cost measures. ► Negative values of cost-effectiveness (in £/tC or equivalent) are invalid. ► There may be errors in published MACCs. ► A method based on Pareto principles provides an alternative ranking method.

  14. Contributing to local policy making on GHG emission reduction through inventorying and attribution: A case study of Shenyang, China

    International Nuclear Information System (INIS)

    Xi Fengming; Geng Yong; Chen Xudong; Zhang Yunsong; Wang Xinbei; Xue Bing; Dong Huijuan; Liu Zhu; Ren Wanxia; Fujita, Tsuyoshi; Zhu Qinghua

    2011-01-01

    Cities consumed 84% of commercial energy in China, which indicates cities should be the main areas for GHG emissions reduction. Our case study of Shenyang in this paper shows how a clear inventory analysis on GHG emissions at city level can help to identify the major industries and societal sectors for reduction efforts so as to facilitate low-carbon policy-making. The results showed total carbon emission in 2007 was 57 Mt CO 2 equivalents (CO 2 e), of which 41 Mt CO 2 e was in-boundary emissions and 16 Mt CO 2 e was out-of-boundary emissions. The energy sector was dominant in the emission inventory, accounting for 93.1% of total emissions. Within energy sector, emissions from energy production industry, manufacturing and construction industry accounted for 88.4% of this sector. Our analysis showed that comparing with geographical boundary, setting system boundary based on single process standard could provide better information to decision makers for carbon emission reduction. After attributing electricity and heating consumption to final users, the resident and commercial sector became the largest emitter, accounting for 28.5% of total emissions. Spatial analysis of emissions showed that industrial districts such as Shenbei and Tiexi had the large potential to reduce their carbon emissions. Implications of results are finally discussed. - Highlights: → An inventory analysis can help identify key industries and societal sectors for reduction efforts. → Setting system boundary can provide better information for carbon emission reduction. → Urban districts with heavy industrial plants have potential to reduce their carbon emissions. → Policies that support urban energy structure optimization can accelerate low-carbon development.

  15. Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

    2015-04-30

    The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

  16. Estimating CO2 Emission Reduction of Non-capture CO2 Utilization (NCCU) Technology

    International Nuclear Information System (INIS)

    Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo; Choi, Jong Shin

    2015-01-01

    Estimating potential of CO 2 emission reduction of non-capture CO 2 utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue gas. For the estimating the CO 2 emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO 2 of 100 tons per day was performed, Also for the estimation of the indirect CO 2 reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO 2 emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO 3 (7.4 GJ/tNaHCO 3 ). While for the NCCU technology, the direct CO 2 reduction through the CO 2 carbonation was estimated as 36,500 ton per year and the indirect CO 2 reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO 2 contained in the flue was energy efficient and could be one of the promising technology for the low CO 2 emission technology.

  17. The climate fund. Some notions on the socio-economic impacts of greenhouse gas emissions and emission reductions in an international context

    International Nuclear Information System (INIS)

    Tol, R.S.J.; Van der Burg, T.; Jansen, H.M.A.; Verbruggen, H.

    1995-05-01

    The title project investigates the possibility of setting up an international climate fund and the way in which this could be arranged. A climate fund is a potential method to enhance the efficiency and efficacy of the reduction of the increase in the amount of greenhouse gases (GHGs) in the atmosphere. It would allow countries to transfer capital, for instance through the here proposed climate fund, and to redistribute the damages caused by global warming. This project focuses on the economic aspects of a climate fund, although some attention will also be given to its political feasibility. The system of tradeable emission permits, of which joint implementation is often seen as a pilot phase, presumes that fixed emission targets exist. In this report the emissions are not prefixed, but optimised in a cost-benefit analysis in which the impact of international capital transfer is examined. In order to determine the impact of international capital transfer on the efficiency and efficacy on optimal greenhouse gas emission reduction, three building blocks are needed. The first block concerns the costs of climate change, or the benefits of climate change control. The second block concerns the costs of emission reduction. The third block is the model to integrate costs and benefits, and calculate the optimal emission control with and without international capital transfers. The project is split into four conceptual phases. In the first phase, a literature survey has been performed of the socio-economic costs and benefits of greenhouse gas emission reductions, with a particular focus on the international distribution of costs and benefits. In the second phase, the costs and benefits are modelled in the Climate Framework for Uncertainty, Negotiation and Distribution (FUND). In the third phase the optimal emission reductions are calculated with and without international capital transfers in several game-theoretic settings. (Abstract Truncated)

  18. The costs of reducing the excess CO{sub 2} emissions. Reduction potential and costs in certain sector; Hvad koster det at reducere CO{sup 2}-mankoen? - Reduktionspotentiale og omkostninger i udvalgte sektorer

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The report presents the results from the project 'The costs of reducing the excess CO{sub 2} emissions - reduction potential and costs in certain sectors'. The aim of the project has been to elucidate the full extent of the reduction potentials and the costs for certain CO{sub 2} reducing initiatives, which are not included in the present projections of the excess CO{sub 2} emissions. The initiatives included in this report are: Accumulation of methane from Danish disposal facilities; Accumulation of methane from disposal facilities in Russia; Reduction in the use of industrial greenhouse gases; Aquifer disposal of CO{sub 2} in the underground; Offshore CO{sub 2} disposal in oil fields in the North Sea. Furthermore, the report presents a general evaluation of the potential of methane accumulation from wastewater treatment. (ba)

  19. Evaluation of measures for greenhouse gas emissions reduction in energy supply sector

    International Nuclear Information System (INIS)

    Khristov, Kh.; Todorova, S.; Vasilev, Kh.; Simeonova, K.

    1996-01-01

    This study performed by the Energoproekt Company, Sofia (BG) is aimed at estimating the economic costs of CO 2 emissions reduction in the electricity supply system for the period 2000-2020. The specific capital investment and cost price of the following technical options have been compared: reduction of electricity and heat loss; gas and steam cycle power plants; micro hydro potential; renewable sources; extension of nuclear power installations; gas steam turbine equipment; combined cycle power plants. The evaluation is made according to requirements of a baseline scenario - to develop an import-independent energy supply policy and an economic growth without sharp structural changes. A 25-year-operation of a hypothetical energy supply system is modelled by the ENPEP code (ANL, US). The three least-cost options identified are: power loss reduction; gas and steam cycle PPs and hydroelectric objects. An optimal combination of measures, so called ' aggregated scenario' is proposed. It would allow for CO 2 reduction by 23,7 mill tons and prime cost reduction by $19,83 per ton reduced emissions. 3 refs., 2 tabs

  20. Unilateral emission reductions of the EU and multilateral emission reductions of the developed countries. Assessing the impact on Finland with TIMES model

    International Nuclear Information System (INIS)

    Ekholm, T.; Lehtilae, A.; Savolainen, I.

    2008-03-01

    This report assesses the impact of the unilateral greenhouse gas emission reductions proposed by the EU on the structure of European and Finnish energy systems with TIMES models. The two models used are techno-economical energy system models including an extensive description of technologies on energy production and consumption. The models derive the sectoral energy demand from given economic projections and calculate the optimal way of satisfying the energy demand through market equilibrium. The basis for EU wide calculations was the Common POLES-IMAGE economic scenarios which project a GDP growth of 2.4 % p.a. until 2020. A sensitivity analysis was conducted with a lower economic growth projection. The results indicated that a reduction of 20 % compared to 1990 emission levels by 2020 would lead to most reductions being conducted at the electricity sector. The consumption of coal in electricity generation would decrease considerably. In the long term some of the natural gas based production would incorporate carbon capture and storage (CCS), and the use of wind power would grow substantially. The value of carbon would lie at levels around 20 to 30 euro/t CO 2 by 2020 were the reductions carried out without flexibility mechanisms. With a reduction target of -30 % by 2050, the value of carbon would rise to 40 . 50 euro/t CO 2 by 2050, and nearly to 100 euro/t CO 2 with a target of -60 % in 2050. The calculations on Finland were based on economic projections by the Ministry of Finance and the Government Institute of Economic Research. The scenarios asses the optimal way of reducing Finnish emissions with a range of prices for emission rights between 20 and 50 euro/t CO 2 . The sectors not included in the emission trading scheme were assumed to conduct reductions with costs up to the value of emission rights. The use of coal was reduced after 2010, accompanied by an increase in the use of natural gas. The utilization of bioenergy increases considerable in the total

  1. The potential of natural gas as a bridging technology in low-emission road transportation in Germany

    Directory of Open Access Journals (Sweden)

    Wang-Helmreich Hanna

    2012-01-01

    Full Text Available Greenhouse gas emission reductions are at the centre of national and international efforts to mitigate climate change. In road transportation, many politically incentivised measures focus on increasing the energy efficiency of established technologies, or promoting electric or hybrid vehicles. The abatement potential of the former approach is limited, electric mobility technologies are not yet market-ready. In a case study for Germany, this paper focuses on natural gas powered vehicles as a bridging technology in road transportation. Scenario analyses with a low level of aggregation show that natural gas-based road transportation in Germany can accumulate up to 464 million tonnes of CO2-equivalent emission reductions until 2030 depending on the speed of the diffusion process. If similar policies were adopted EU-wide, the emission reduction potential could reach a maximum of about 2.5 billion tonnes of CO2-equivalent. Efforts to promote natural gas as a bridging technology may therefore contribute to significant emissions reductions.

  2. Carbon emissions and an equitable emission reduction criterion

    International Nuclear Information System (INIS)

    Golomb, Dan

    1999-01-01

    In 1995 the world-wide carbon emissions reached 5.8 billion metric tonnes per year (GTC/y). The Kyoto protocol calls for a reduction of carbon emissions from the developed countries (Annex I countries) of 6-8% below 1990 levels on the average, and unspecified commitments for the less developed (non-Annex I) countries. It is doubtful that the Kyoto agreement will be ratified by some parliaments, especially the USA Congress. Furthermore, it is shown that if the non-Annex I countries will not curtail their carbon emissions drastically, the global emissions will soar to huge levels by the middle of the next century. An equitable emission criterion is proposed which may lead to a sustainable rate of growth of carbon emissions, and be acceptable to all countries of the world. The criterion links the rate of growth of carbon emissions to the rate of growth of the Gross Domestic Product (GDP). A target criterion is proposed R = 0.15 KgC/SGDP, which is the current average for western European countries and Japan. This allows for both the growth of the GDP and carbon emissions. However, to reach the target in a reasonable time, the countries for which R≤ 0.3 would be allowed a carbon emission growth rate of 1%./y, and countries for which R≥ 0.3, 0.75%/y. It is shown that by 2050 the world-wide carbon emissions would reach about 10 GTC/y, which is about 3 times less than the Kyoto agreement would allow. (Author)

  3. Reduction of CO2 emissions by influencing fuel prices

    International Nuclear Information System (INIS)

    Keller, M.; Zbinden, R.; Haan, P.; Gruetter, J.; Ott, W.

    2002-01-01

    viable option. If, however, the more sensible - as far as ecological issues and CO 2 are concerned - use of biogas is not to be hindered, biogas' handicap must be taken into account when promotional measures are planned (e.g. graduated tax-exemption, delivery agreements). For bio-fuels, the addition of ethanol to petrol (E10: 10% added) seems to be a viable option with significant CO 2 emission reduction potential at comparatively low costs, but not the addition of 85% (E85) because of vehicle modification costs and costs for the additional infrastructure, or the promotion of RME (Rapeseed-Methyl-Ester) because of very high CO 2 emission avoidance costs and negative local environmental effects

  4. Reduction of CO2 emissions by reduction of paper use for publication applications

    Energy Technology Data Exchange (ETDEWEB)

    Van den Reek, J.A.

    1999-10-01

    The main research question of this study is as follows: What is the technical potential for reducing paper use in the field of publication applications in Western Europe within a time frame of 10-20 years, and what will the consequences for CO2 emissions be? To answer this central question we have defined the next four subquestions, all related to Western Europe: (1) How were the historical trends for the consumption figures of publication papers?; (2) What will be the expected publication paper consumption the next 10-20 years based on the historical trends, and what will be the influence on the related CO2 emissions?; (3) What technical opportunities do we see to reduce the future paper consumption trend for publication applications and what will be the individual and cumulative technical potential of these innovations?; (4) Does implementation of the technical opportunities lead to a significant dematerialization effect? Chapter 2 describes the chosen research method. In Chapter 3 we will introduce and define the paper types studied. Furthermore, Chapter 3 describes the detailed division of publication papers we have used in this study and the relationship with pulp and papermaking. After reading this chapter it has to be clear which paper production methods and paper types are (per ton) responsible for how much CO2 emissions. To get an overall-impression of the relevance of certain papers for CO2 emission numbers it is important to have insight into the historical consumption patterns of publication papers. Chapter 4 pays attention to these consumption patterns. Chapter 5 describes the most important trend factors that may influence future paper consumption patterns and in Chapter 6 this is translated into three possible consumption growth scenarios. The first and second growth scenarios are only based on extrapolations from historical figures, the third scenario is based on some of the most significant potential reduction measures. Furthermore, Chapter 6 gives

  5. Simulating greenhouse gas (GHG) allowance cost and GHG emission reduction in Western Europe

    International Nuclear Information System (INIS)

    Delarue, Erik; Lamberts, Hans; D'haeseleer, William

    2007-01-01

    Due to the growing concern for global warming, the EU25 have implemented the European Union Greenhouse Gas Emission Trading Scheme (EU ETS). In the first trading period (2005-2007), part of the targeted GHG emission reductions presumably will have to result from a switch from coal fired electricity generation to gas fired electricity generation. It is possible to calculate the allowance cost necessary to switch a certain coal fired plant with a certain gas fired plant in the merit order. The allowance cost obtained is a so called switching point. When comparing historic European Union Allowance (EUA) prices (2005) with the corresponding historic switching points, the EUA prices were found high enough to cause a certain switch in the summer season. This finding leads to the use of switching points in establishing allowance cost profiles for several scenarios. A variable gas price profile is used in the simulation tool E-Simulate to simulate electricity generation and related GHG emissions in an eight zonal model representing Western Europe. Several GHG allowance cost profile scenarios are examined. For each scenario, electricity generation in the considered countries is clarified. The focus however lies on the GHG emission reduction potentials. These potentials are addressed for each scenario

  6. International markets for greenhouse gas emission reduction policies - possibilities for integrating developing countries

    DEFF Research Database (Denmark)

    Halsnæs, K.; Olhoff, A.

    2005-01-01

    Greenhouse gas (GHG) emissions are affecting a global common: the climate, and as a global environmental problem with a public good character it provides attractive opportunities for minimising control costs through the use of emission trading markets. This paper introduces cost and benefit princ...... principles that can be applied to the assessment of global markets for GHG emission reduction options and evaluates the scope for and the potential economic gains of such markets.......Greenhouse gas (GHG) emissions are affecting a global common: the climate, and as a global environmental problem with a public good character it provides attractive opportunities for minimising control costs through the use of emission trading markets. This paper introduces cost and benefit...

  7. Potential of plug-in hybrid electric vehicle for reduction of CO2 emission and role of non-fossil power plant

    International Nuclear Information System (INIS)

    Hiwatari, R.; Okano, K.; Yamamoto, H.

    2009-01-01

    A method to analyze the demand of electricity and the reduction of CO 2 emission and oil consumption by PHEV is established. Using the performance of PHEV optimized by EPRI and an estimation on the pattern of driving and charging in Japan, the following results are obtained. The electric demand for PHEV60(which has 60mile EV range) and PHEV20(which has 20mile EV range) is evaluated at 79.3 billion kWh and 41.2 billion kWh, respectively, in case that all vehicles in Japan (80 million cars) would be replaced by PHEV. The load leveling effect on the Japanese grid, which is hypothetically considered as one electric grid system, is evaluated at about 30 million kW, in case that all vehicles in Japan are replaced by PHEV60 and charged in the midnight. However, when the charge of PHEVs starts in the evening, that effect is not obtained. The reduction of CO 2 emission results in 64 million ton by the averaged CO 2 emissions intensity (emissions per unit of user end electricity) in Japan, and 98 million ton by electricity from the non-fossil power plant such as nuclear energy or renewable one. Those values are equivalent to 25% and 38% of CO 2 emission from the transport sector in Japan in 2003. Hence, non-fossil power plant enhances the reduction of CO 2 emission by the PHEV introduction. (author)

  8. Effects of emission reductions from the smelters in Sudbury on recovery of lakes within the metal deposition zone

    Energy Technology Data Exchange (ETDEWEB)

    Keller, W.; Heneberry, J.; Clark, M.; Malette, M.; Gunn, J. [Laurentian Univ., Sudbury, ON (Canada) Dept. of Biology

    1999-07-01

    Recent trends are examined in the chemistry of Sudbury lakes for evidence of further chemical recovery, as well as some of the biological characteristics of recovering Sudbury lakes. Preliminary results are provided from studies investigating physical, chemical and biological factors that may influence the lake recovery process with a focus on the lakes close to Sudbury that were historically the most severely affected. Smelter emission reductions in the Sudbury area have led to substantial changes in the water quality of area lakes, and decreases in acidity, sulfate, and copper and nickel concentrations followed the substantial decreases in emissions during the 1970s and similar trends are continuing after the implementation of large additional smelter emission reductions in the 1990s. Some of the most highly affected lakes close to the Sudbury smelters have showed very dramatic reductions in acidity and metal concentrations during the 1990s. Evaluation of the direct effects of the recent emissions reductions is confounded by the potential continuing effects of previous emission reductions and the effects of weather variations on chemistry time trends in Sudbury lakes. Continued monitoring of Sudbury lakes is essential to evaluate the ultimate effect of emission reduction programs, to develop an understanding of the recovery process, and to determine the need for any additional emission reduction requirements. 38 refs., 7 figs.

  9. Greenhouse gases reduction potential through consumer’s behavioral changes in terms of food-related product selection

    International Nuclear Information System (INIS)

    Yoshikawa, Naoki; Fujiwara, Natsumi; Nagata, Junko; Amano, Koji

    2016-01-01

    Highlights: • Greenhouse gases (GHG) reduction potential by shopping behavior change is analyzed. • Four scenarios related to food consumption is evaluated using life cycle assessment. • Total GHG reduction potential by four scenarios in Japan is 1367 kt-CO_2/year. • Potential reduces to 45% when considering feasible ratio of taking behavior change. • Contribution of seasonal production/consumption scenario is highest among scenarios. - Abstract: Sustainable consumption plays an important role in the mitigation of global warming and the conservation of energy. Promoting more environmentally responsible consumer behavior, especially through open communication between stakeholders, is one way to achieve low-carbon consumption. This study evaluates the potential for reducing greenhouse gas (GHG) emissions through behavioral transformation of consumers in terms of their daily shopping habits. In this context, the behavioral transformative actions pertain to certain foods and daily necessities, and are analyzed from a life cycle assessment perspective. We developed multiple product-selection scenarios to evaluate GHG emissions related to the daily purchase of commodities. Based on the life cycle assessment, we estimated the GHG emissions that result from the production and distribution of these commodities, pertaining to both the current product selection and to a possibly improved selection. The results of our study show that because of seasonal consumption patterns and energy conversion, there is a substantial potential to reduce GHG emissions resulting from out-of-season produce cultivation. The GHG reduction potential is not high for each individual commodity because diverse commodities are needed on a daily basis. However, various actions in combination could have substantial potential for reducing emissions.

  10. The Global Potential for Drastic Reduction of Greenhouse Gas Emissions. On the interaction between technological innovation, sustainable growth and lifestyle development

    Energy Technology Data Exchange (ETDEWEB)

    Bruggink, J.J.C. [ECN Policy Studies, Petten (Netherlands)

    2000-03-01

    Technological innovation is often viewed as the key to drastic reduction of greenhouse gas emissions, and rightly so. In fact there are already a number of technologies on the shelf that could fix global warming problems in no time. The trouble is that few people in the developing world can afford them or that few people in the developed world find them acceptable. Most people are simply too poor or too critical. So what are the decisive fault lines that should distinguish a climate-friendly next century from a climate-hostile past? First, only a more equal world will make drastic reduction of greenhouse gas emissions affordable. Secondly, mankind will have to accept that in addition to technological innovation, drastic reduction of greenhouse gas emissions depends on lifestyle innovation.

  11. Emissions reduction scenarios in the Argentinean Energy Sector

    International Nuclear Information System (INIS)

    Di Sbroiavacca, Nicolás; Nadal, Gustavo; Lallana, Francisco; Falzon, James; Calvin, Katherine

    2016-01-01

    In this paper the LEAP, TIAM-ECN, and GCAM models were applied to evaluate the impact of a variety of climate change control policies (including carbon pricing and emission constraints relative to a base year) on primary energy consumption, final energy consumption, electricity sector development, and CO_2 emission savings of the energy sector in Argentina over the 2010–2050 period. The LEAP model results indicate that if Argentina fully implements the most feasible mitigation measures currently under consideration by official bodies and key academic institutions on energy supply and demand, such as the ProBiomass program, a cumulative incremental economic cost of 22.8 billion US$(2005) to 2050 is expected, resulting in a 16% reduction in GHG emissions compared to a business-as-usual scenario. These measures also bring economic co-benefits, such as a reduction of energy imports improving the balance of trade. A Low CO_2 price scenario in LEAP results in the replacement of coal by nuclear and wind energy in electricity expansion. A High CO_2 price leverages additional investments in hydropower. By way of cross-model comparison with the TIAM-ECN and GCAM global integrated assessment models, significant variation in projected emissions reductions in the carbon price scenarios was observed, which illustrates the inherent uncertainties associated with such long-term projections. These models predict approximately 37% and 94% reductions under the High CO_2 price scenario, respectively. By comparison, the LEAP model, using an approach based on the assessment of a limited set of mitigation options, predicts an 11.3% reduction. The main reasons for this difference include varying assumptions about technology cost and availability, CO_2 storage capacity, and the ability to import bioenergy. An emission cap scenario (2050 emissions 20% lower than 2010 emissions) is feasible by including such measures as CCS and Bio CCS, but at a significant cost. In terms of technology

  12. Catalytic reduction of emissions from small-scale combustion of biomass

    International Nuclear Information System (INIS)

    Berg, Magnus; Gustavsson, Patrik; Berge, Niklas

    1998-01-01

    This report covers a study on the prospect of using catalytic techniques for the abatement of emissions from small-scale combustion of biomass. The results show that there is a great potential for catalytic techniques and that the emissions of primarily CO and unburned hydrocarbons can be reduced but also that indirectly the emissions of NO x can be reduced. The aim of the project was to methodically indicate the requirement that both the catalyst and the stove must meet to enable the development of low emission stoves utilising this technique. The project should also aim at the development of catalysts that meet these requirements and apply the technique on small-scale stoves. By experimental work these appliances have been evaluated and conclusions drawn on the optimisation of the technique. The project has been performed in close collaboration between TPS Termiska Processer AB, Department of Chemical Technology at KTH, Perstorp AB and CTC-PARCA AB. The development of new catalysts have been conduc ted by KTH in collaboration with Perstorp while the work performed by TPS have been directed towards the integration of the monolithic catalysts in two different stoves that have been supplied by CTC. In one of these stoves a net based catalyst developed by KATATOR have also been tested. Within the project it has been verified experimentally that in a wood fired stove a reduction of the CO-emissions of 60% can be achieved for the monolithic catalysts. This reduction could be achieved even without any optimisation of the design. Experiments in a smaller scale and under well controlled conditions have shown that almost 100% reduction of CO can be achieved. The parameters that limits the conversion over the catalyst, and thereby prevents that the targeted low emissions can be reached, have been identified as: * Short residence time, * Mass transport limitations caused by the large channel width, * Uneven temperature profile over the catalyst, and * Insufficient mixing

  13. Emissions of CO{sub 2} from road freight transport in London: Trends and policies for long run reductions

    Energy Technology Data Exchange (ETDEWEB)

    Zanni, Alberto M., E-mail: a.m.zanni@lboro.ac.u [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom); Bristow, Abigail L., E-mail: a.l.bristow@lboro.ac.u [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom)

    2010-04-15

    Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO{sub 2} emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO{sub 2} emissions reduction targets to be met.

  14. Emissions of CO{sub 2} from road freight transport in London. Trends and policies for long run reductions

    Energy Technology Data Exchange (ETDEWEB)

    Zanni, Alberto M.; Bristow, Abigail L. [Transport Studies Group, Department of Civil and Building Engineering, Loughborough University, LE11 3TU Loughborough (United Kingdom)

    2010-04-15

    Freight transport has been receiving increasing attention in both literature and practice following the growing recognition of its importance in urban transport planning. This paper analyses historical and projected road freight CO{sub 2} emissions in the city of London and explores the potential mitigation effect of a set of freight transport policies and logistics solutions. Findings indicate a range of policies with potential to reduce emissions in the period up to 2050. However, this reduction would appear to only be capable of partly counterbalancing the projected increase in freight traffic. More profound behavioural measures therefore appear to be necessary for London's CO{sub 2} emissions reduction targets to be met. (author)

  15. Uncertain Emission Reductions from Forest Conservation: REDD in the Bale Mountains, Ethiopia

    Directory of Open Access Journals (Sweden)

    Charlene Watson

    2013-09-01

    Full Text Available The environmental integrity of a mechanism rewarding Reduced Emissions from Deforestation and Degradation (REDD depends on appropriate accounting for emission reductions. Largely stemming from a lack of forest data in developing countries, emission reductions accounting contains substantial uncertainty as a result of forest carbon stock estimates, where the application of biome-averaged data over large forest areas is commonplace. Using a case study in the Bale Mountains in Ethiopia, we exemplify the implications of primary and secondary forest carbon stock estimates on predicted REDD project emission reductions and revenues. Primary data estimate area-weighted mean forest carbon stock of 195 tC/ha ± 81, and biome-averaged data reported by the Intergovernmental Panel on Climate Change underestimate forest carbon stock in the Bale Mountains by as much as 63% in moist forest and 58% in dry forest. Combining forest carbon stock estimates and uncertainty in voluntary carbon market prices demonstrates the financial impact of uncertainty: potential revenues over the 20-year project ranged between US$9 million and US$185 million. Estimated revenues will influence decisions to implement a project or not and may have profound implications for the level of benefit sharing that can be supported. Strong financial incentives exist to improve forest carbon stock estimates in tropical forests, as well as the environmental integrity of REDD projects.

  16. Carbon reduction potentials of China's industrial parks: A case study of Suzhou Industry Park

    International Nuclear Information System (INIS)

    Wang, Hongsheng; Lei, Yue; Wang, Haikun; Liu, Miaomiao; Yang, Jie; Bi, Jun

    2013-01-01

    Industrial parks are the economic engines for many China regions, but they also consume a great deal of energy and emit greenhouse gases. However, few empirical studies have examined these special communities. We selected SIP (Suzhou Industrial Park) as a case study. Carbon emissions from SIP were accounted from the consumption perspective to analyze their characteristics. Results showed total carbon emissions grew 85.2% from 2005 to 2010, and carbon intensity (carbon emissions per unit of GDP (gross domestic product)) decreased by 9%. Scenario analysis was then used to depict emissions trajectories under three different pathways. The total carbon emissions and per capita carbon emissions for SIP will undoubtedly increase in the near future under a business-as-usual scenario, improved-policy scenario, and low-carbon scenario; the carbon intensity will decrease by 38% under low-carbon scenario, but it will still be difficult to reach the national mitigation target. In addition, geographic-boundary-based accounting methodology was applied for comparison analysis, carbon emissions show a large gap of 42.4–65.1% from 2005 to 2010, due to failure to account for cross-boundary emissions from imported electricity. Therefore, comprehensive analysis from a consumption perspective is necessary to provide a fair and comprehensive tool for China's local decision-makers to evaluate carbon mitigation potentials. - Highlights: ► Carbon reduction potentials of industrial parks, which are important communities in China, were analyzed. ► Comprehensive carbon emission inventories were developed for a China's industrial park. ► Policies were recommended for industrial parks to achieve low-carbon development target. ► Consumption-based emission inventory is necessary for local government to evaluate carbon reduction potentials

  17. Proceedings of the 1998 diesel engine emissions reduction workshop [DEER

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This workshop was held July 6--9, 1998 in Castine, Maine. The purpose of this workshop was to provide a multidisciplinary forum for exchange of state-of-the-art information on reduction of diesel engine emissions. Attention was focused on the following: agency/organization concerns on engine emissions; diesel engine issues and challenges; health risks from diesel engines emissions; fuels and lubrication technologies; non-thermal plasma and urea after-treatment technologies; and diesel engine technologies for emission reduction 1 and 2.

  18. Realizing CO2 emission reduction through industrial symbiosis: A cement production case study for Kawasaki

    OpenAIRE

    Hashimoto, Shizuka; Fujita, Tsuyoshi; Geng, Yong; Nagasawa, Emiri

    2010-01-01

    This article is one effort to examine the present and potential performances of CO2 emission reduction though industrial symbiosis by employing a case study approach and life cycle CO2 analysis for alternative industrial symbiosis scenarios. As one of the first and the best-known eco-town projects, Kawasaki Eco-town was chosen as a case study area. First, the current industrial symbiosis practices in this area are introduced. To evaluate the potential of reducing the total CO2 emission throug...

  19. Energy saving and CO2-reduction potential of micro-cogeneration in the Netherlands (2010-2030). Update 2008

    International Nuclear Information System (INIS)

    Van Gastel, M.; De Jong, A.; Schlatmann, S.; Bakker, E.J.; Jeeninga, H.; Boerakker, Y.; Seebregts, A.; Menkveld, M.; Van Wolferen, H.; Turkstra, J.W.; Dam, J.; Harmsen, R.; Rooijers, F.; Koot, M.

    2008-05-01

    Various parties have been asked to come to a joint point of view with regard to establishing the potential of micro CHP for energy saving and CO2 emission reduction in the Netherlands from 2010 to 2030, assuming that micro CHP will have a successful market introduction. The result of this memo is a method for determining the technical potential of micro CHP for the reduction of energy use and CO2 emissions. This report is an update of the 2006 report [mk] [nl

  20. Potential for greenhouse gas reduction in industry through increased heat recovery and/or integration of combined heat and power

    International Nuclear Information System (INIS)

    Axelsson, H.; Harvey, S.; Aasblad, A.; Berntsson, T.

    2003-01-01

    The potential for greenhouse gas (GHG) reduction in industry through process integration measures depends to a great extent on prevailing technical and economic conditions. A step-wise methodology developed at the author's department based on pinch technology was used to analyse how various parameters influence the cost-optimal configuration for the plant's energy system, and the opportunities for cost-effective GHG emissions reduction compared to this solution. The potential for reduction of GHG emissions from a given plant depends primarily on the design of the industrial process and its energy system (internal factors) and on the electricity-to-fuel price ratio and the specific GHG emissions from the national power generation system (external factors)

  1. Optical crosstalk reduction using Amplified Spontaneous Emission (ASE)

    NARCIS (Netherlands)

    Chen, H.; Fontaine, N.K.; Ryf, R.; Alvarado, J.C.; van Weerdenburg, J.A.A.; Amezcua-Correa, R.; Okonkwo, C.; Koonen, A.M.J.

    2018-01-01

    We employ spectrally filtered amplified spontaneous emission as the signal carrier and matched local oscillator to mitigate optical crosstalk. We demonstrate polarization crosstalk reduction in single-mode fiber transmission and modal crosstalk reduction over multimode fiber.

  2. Quantified, localized health benefits of accelerated carbon dioxide emissions reductions

    Science.gov (United States)

    Shindell, Drew; Faluvegi, Greg; Seltzer, Karl; Shindell, Cary

    2018-04-01

    Societal risks increase as Earth warms, and increase further for emissions trajectories accepting relatively high levels of near-term emissions while assuming future negative emissions will compensate, even if they lead to identical warming as trajectories with reduced near-term emissions1. Accelerating carbon dioxide (CO2) emissions reductions, including as a substitute for negative emissions, hence reduces long-term risks but requires dramatic near-term societal transformations2. A major barrier to emissions reductions is the difficulty of reconciling immediate, localized costs with global, long-term benefits3,4. However, 2 °C trajectories not relying on negative emissions or 1.5 °C trajectories require elimination of most fossil-fuel-related emissions. This generally reduces co-emissions that cause ambient air pollution, resulting in near-term, localized health benefits. We therefore examine the human health benefits of increasing 21st-century CO2 reductions by 180 GtC, an amount that would shift a `standard' 2 °C scenario to 1.5 °C or could achieve 2 °C without negative emissions. The decreased air pollution leads to 153 ± 43 million fewer premature deaths worldwide, with 40% occurring during the next 40 years, and minimal climate disbenefits. More than a million premature deaths would be prevented in many metropolitan areas in Asia and Africa, and >200,000 in individual urban areas on every inhabited continent except Australia.

  3. Energy-Efficiency and Air-Pollutant Emissions-Reduction Opportunities for the Ammonia Industry in China

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Ding [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chen, Wenying [Tsinghua Univ., Beijing (China)

    2015-06-01

    As one of the most energy-intensive and polluting industries, ammonia production is responsible for significant carbon dioxide (CO2) and air-pollutant emissions. Although many energy-efficiency measures have been proposed by the Chinese government to mitigate greenhouse gas emissions and improve air quality, lack of understanding of the cost-effectiveness of such improvements has been a barrier to implementing these measures. Assessing the costs, benefits, and cost-effectiveness of different energy-efficiency measures is essential to advancing this understanding. In this study, a bottom-up energy conservation supply curve model is developed to estimate the potential for energy savings and emissions reductions from 26 energy-efficiency measures that could be applied in China’s ammonia industry. Cost-effective implementation of these measures saves a potential 271.5 petajoules/year for fuel and 5,443 gigawatt-hours/year for electricity, equal to 14% of fuel and 14% of electricity consumed in China’s ammonia industry in 2012. These reductions could mitigate 26.7 million tonnes of CO2 emissions. This study also quantifies the co-benefits of reducing air-pollutant emissions and water use that would result from saving energy in China’s ammonia industry. This quantitative analysis advances our understanding of the cost-effectiveness of energy-efficiency measures and can be used to augment efforts to reduce energy use and environmental impacts.

  4. A probabilistic production costing analysis of SO2 emissions reduction strategies for Ohio: emissions, costs and employment tradeoffs

    International Nuclear Information System (INIS)

    Heslin, J.S.; Hobbs, B.F.

    1991-01-01

    A new approach for state- and utility-level analysis of the cost and regional economic impacts of strategies for reducing utility SO 2 emissions is summarized and applied to Ohio. The methodology is based upon probabilistic production costing and economic input-output analysis. It is an improvement over previous approaches because it: (1) accurately models random outages of generating units, 'must-run' constraints on unit output, and the distribution of power demands; and (2) runs quickly on a microcomputer and yet considers the entire range of potential control strategies from a systems perspective. The input-output analysis considers not only the economic effects of utility fuel use and capital investment, but also those of increased electric rates. Two distinct strategies are found to be most attractive for Ohio. The first, more flexible one, consists of emissions dispatching (ED) alone to meet short run emissions reduction targets. A 75 percent reduction can then be achieved by the turn of the century by combining ED and fuel switching (FS) with flue gas desulfurization, limestone injection multistage burners, and physical coal cleaning at selected plants. The second is a scrubber-based strategy which includes ED. By the year 2000, energy conservation becomes a cost effective component of these strategies. In order to minimize compliance costs, acid rain legislation which facilitates emission trading and places regional tonnage limits on emissions is desirable

  5. Volatile organic compounds and oxides of nitrogen. Further emission reductions

    Energy Technology Data Exchange (ETDEWEB)

    Froste, H [comp.

    1997-12-31

    This report presents the current status in relation to achievement of the Swedish Environmental target set by Parliament to reduce emission of volatile organic compounds by 50 per cent between 1988 and 2000. It also instructed the Agency to formulate proposed measures to achieve a 50 per cent reduction of emission of nitrogen oxides between 1985 and 2005. The report presents an overall account of emission trends for volatile organic compounds (from all sectors) and nitrogen oxides (from the industry sector) and steps proposed to achieve further emission reductions. 43 refs

  6. Volatile organic compounds and oxides of nitrogen. Further emission reductions

    Energy Technology Data Exchange (ETDEWEB)

    Froste, H. [comp.

    1996-12-31

    This report presents the current status in relation to achievement of the Swedish Environmental target set by Parliament to reduce emission of volatile organic compounds by 50 per cent between 1988 and 2000. It also instructed the Agency to formulate proposed measures to achieve a 50 per cent reduction of emission of nitrogen oxides between 1985 and 2005. The report presents an overall account of emission trends for volatile organic compounds (from all sectors) and nitrogen oxides (from the industry sector) and steps proposed to achieve further emission reductions. 43 refs

  7. Impact of Agricultural Emission Reductions on Fine Particulate Matter and Public Health

    Science.gov (United States)

    Pozzer, A.; Tsimpidi, A.; Karydis, V.; De Meij, A.; Lelieveld, J.

    2017-12-01

    A global chemistry-climate model has been used to study the impacts of pollutants released by agriculture on fine particulate matter (PM2.5), with a focus on Europe, North America, South and East Asia. Hypothetical reduction of agricultural emission of 50%, 66% and 100% have been simulated and compared with the reference simulation. The simulations results reveal that a relatively strong reduction in PM2.5 levels can be achieved by decreasing agricultural emissions, and this effect can almost be exclusively explain by the reduction of ammonia (NH3) emissions, released from fertilizer use and animal husbandry. The absolute impact on PM2.5 reduction is strongest in East Asia, even for small emission decreases, although the relative reduction is very low (below 13% for a full removal of agricultural emissions) . Conversely, over Europe and North America, aerosol formation is not directly limited by the availability of ammonia. Nevertheless, reduction of NH3 can also substantially decrease PM2.5concentrations over the latter regions, especially when emissions are abated systematically and an ammonia limited regions of aerosol growth is reached. Further, our results document how reduction of agricultural emissions decreases aerosol pH due to the depletion of aerosol ammonium, which affects particle liquid phase and heterogeneous chemistry. It is calculated that ammonia emission controls could reduce the particle pH up to 1.5 pH-units in East Asia during winter, and more than 1.7 pH-units in South Asia, theoretically assuming complete agricultural emission removal, which could have repercussions for the reactive uptake of gases from the gas phase and the outgassing of relative weak acids. It is finally shown that a 50% reduction of agricultural emissions could prevent the mortality attributable to air pollution by 250 thousands people per year worldwide, amounting to reductions of 30%, 19% , 8% and 3% over North America, Europe and South Asia and East Asia, respectively

  8. Quantified, Localized Health Benefits of Accelerated Carbon Dioxide Emissions Reductions.

    Science.gov (United States)

    Shindell, Drew; Faluvegi, Greg; Seltzer, Karl; Shindell, Cary

    2018-01-01

    Societal risks increase as Earth warms, but also for emissions trajectories accepting relatively high levels of near-term emissions while assuming future negative emissions will compensate even if they lead to identical warming [1]. Accelerating carbon dioxide (CO 2 ) emissions reductions, including as a substitute for negative emissions, hence reduces long-term risks but requires dramatic near-term societal transformations [2]. A major barrier to emissions reductions is the difficulty of reconciling immediate, localized costs with global, long-term benefits [3, 4]. However, 2°C trajectories not relying on negative emissions or 1.5°C trajectories require elimination of most fossil fuel related emissions. This generally reduces co-emissions that cause ambient air pollution, resulting in near-term, localized health benefits. We therefore examine the human health benefits of increasing ambition of 21 st century CO 2 reductions by 180 GtC; an amount that would shift a 'standard' 2°C scenario to 1.5°C or could achieve 2°C without negative emissions. The decreased air pollution leads to 153±43 million fewer premature deaths worldwide, with ~40% occurring during the next 40 years, and minimal climate disbenefits. More than a million premature deaths would be prevented in many metropolitan areas in Asia and Africa, and >200,000 in individual urban areas on every inhabited continent except Australia.

  9. Fundamental research on sintering technology with super deep bed achieving energy saving and reduction of emissions

    International Nuclear Information System (INIS)

    Hongliang Han; Shengli Wu; Gensheng Feng; Luowen Ma; Weizhong Jiang

    2012-01-01

    In the general frame of energy saving, environment protection and the concept of circular economy, the fundamental research on the sintering technology with super deep bed, achieving energy saving and emission reduction, was carried out. At first, the characteristics of the process and exhaust emission in the sintering with super deep bed was mastered through the study of the influence of different bed depths on the sintering process. Then, considering the bed permeability and the fuel combustion, their influence on the sinter yield and quality, their potential for energy saving and emission reduction was studied. The results show that the improvement of the bed permeability and of the fuel combustibility respectively and simultaneously, leads to an improvement of the sintering technical indices, to energy saving and emission reduction in the condition of super deep bed. At 1000 mm bed depth, and taking the appropriate countermeasure, it is possible to decrease the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 10.08%, 11.20%, 22.62% and 25.86% respectively; and at 700 mm bed depth, it is possible to reduce the solid fuel consumption and the emission of CO 2 , SO 2 , NO x by 20.71%, 22.01%, 58.86% and 13.13% respectively. This research provides the theoretical and technical basis for the new technology of sintering with super deep bed, achieving energy saving and reduction of emission. (authors)

  10. Households Willingness to Pay for the Emissions Reduction Policy, Queensland, Australia

    Directory of Open Access Journals (Sweden)

    Galina Williams

    2015-09-01

    Full Text Available This study examines households’ willingness to support the emissions reduction policy and their perceptions of climate change using an Internet survey of more than 1,000 households in Queensland, Australia. Respondents were asked for their willingness to pay (WTP to support the emissions reduction target proposed by the Australian Government by paying extra on their electricity bills. The results can be summarized in four key findings. First, respondents’ WTP to support the emissions reduction target is higher if they perceive that climate change will result in high loss of biodiversity. Second, respondents were willing to support a higher emissions target than proposed by the Australian Government. Third, there is a correlation between respondents WTP to support the emissions reduction and their beliefs about climate change, its effect on standards of living, the environment, and future generations. Fourth, as the data show a high rate of zero responses, common for the contingent valuation method (CVM used in the survey, the zero bids were further investigated using the non-parametric Turnbull model and the more recent spike model. The results showed that although there is some support for the emissions reduction policy, it is not sufficient for the policy to be successful.

  11. Internal combustion engine run on biogas is a potential solution to meet Indonesia emission target

    Science.gov (United States)

    Ambarita, Himsar

    2017-09-01

    Indonesia has released two different Greenhouse Gas (GHG) emissions reduction targets. The first target, released in 2009, is reduction GHG emissions 26% from Business-as-Usual (BAU) level using own budget and up 41% if supported international aids by 2020. The second target is reduction 29% and 41% from BAU by 2030 using own budget and with international support, respectively. In this paper, the BAU emissions and emissions reduction target of these two targets are elaborated. In addition, the characteristics of emissions from transportation sector are discussed. One of the potential mitigation actions is switching fuel in transportation sector. The results the most promising mitigation action in the transportation is switching oil fuel with biofuel. The Government of Indonesia (GoI) focuses on using biodiesel and bioethanol to run internal combustion engine in transportation sector and biogas is aimed to fuel power plant unit. However, there is very limited of success stories on using biogas in the power plant. The barriers and challenges will be discussed here. It is suggested to run internal combustion engine with biogas.

  12. CO2 substitution potential and CO2 reduction costs of an energetic exploitation of solid biomasses in Germany

    International Nuclear Information System (INIS)

    Becher, S.

    1995-01-01

    For the reduction of the anthropogenic greenhouse effect, the CO 2 , emissions are clearly to be reduced in future, according to the resolution made by the Federal Republic. Against the background of this objective, possible contributions of the biogenous solid fuels for the reduction of the CO 2 release of fossil origin are presented and discussed. For that, first the existing potentials of biomass in Germany and their present use are shown. Based on this, the CO 2 emissions by the present use already avoided, as well as the existing unexploited potentials of the CO 2 reduction potentials still to be exploited are determined. In accordance with an 'integral' starting point, thereby all pre- and post-positioned processes are considered. Finally, the specific CO 2 reduction costs are analysed and compared with other options. (orig.) [de

  13. Options for utilizing the CDM for global emission reductions

    Energy Technology Data Exchange (ETDEWEB)

    Butzengeiger-Geyer, Sonja; Castro, Paula; Harthan, Ralph O.; Hayashi, Daisuke; Healy, Sean; Maribu, Karl Magnus; Michaelowa, Axel; Okubo, Yuri; Schneider, Lambert; Storroe, Ingunn [Zuerich Univ. (Switzerland); Oeko-Institut e.V., Berlin (Germany); Perspectives GmbH, Hamburg (Germany); Point Carbon A/S, Oslo (Norway)

    2010-11-15

    The study describes and discusses in detail how four CDM reform alternatives, namely discounting of emission reductions, ambitious baselines, purchase and cancellation of CERs and reinvestment of CER levies, could be integrated in a Post-2012 climate regime. The study assesses these alternatives, according to their impacts on GHG emission reductions, contribution to sustainable development, cost-efficiency, technical feasibility, incentives and distributional effects as well as negotiability. The study shows that the introduction of discounting and ambitious baselines is technically feasible but politically a massive challenge. With the help of an economic model the study shows that the introduction of reform alternatives increases the amount of emission reductions but in comparison to the current CDM the impact is rather limited. But a CDM reform can in any case increase the credibility and improve the environmental integrity of the mechanism. (orig.)

  14. Emission reduction trading - a power marketer`s perspective

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, M. [Powerex Inc., Vancouver, BC (Canada)

    1999-10-01

    The current situation , and the short-term and long-term outlook in emission reduction trading are reviewed from the point of view of a power marketer. The author`s view is that while the concept of emission reduction credit (ERC) is easy enough to understand, i.e. a series of measures to reduce carbon dioxide production and enhance carbon sequestration, there is no standard definition, although there are a number of models under consideration. What is being sought is clear ownership and title, a clear understanding of what qualifies as a credit, credit for early action, commodity specifications and the ability to hedge. The author predicts that in the short-tem, industry will experiment with different types of transactions to gain experience and seek partners who are willing to share risk and development cost. In the longer-term, emission reduction credits will be bought and sold as commodities and traded, swapped or exchanged as part of a portfolio in bilateral trade transactions, and used in hedging against future liabilities.

  15. Politics for emissions reduction at large combustion plants

    International Nuclear Information System (INIS)

    Dragos, L.; Persu, I.; Predescu, I.

    2005-01-01

    This article presents the harmonization process of Romanian national legislation with EU directives for the establishment of measures for the emission reduction of air pollutants from large combustion plants. The quantity of SO 2 , NO x and dust emissions from big combustion installation during the period 1980 - 2003 is given. The characteristics of the native fuels are also presented. Recently a reorganization and restructuring of the electricity production from lignite are accomplished. It is emphasised in the paper that the use of lignite for energy production is necessary even if the additional costs implied by the compliance with Directive 2001/80/EC are high. Clean combustion technologies and equipment promoted by the OVM-ICCPET, Bucharest will be applied for the improvement of the burning process and reduction of the emissions

  16. Technologies for utilization of industrial excess heat: Potentials for energy recovery and CO2 emission reduction

    International Nuclear Information System (INIS)

    Broberg Viklund, Sarah; Johansson, Maria T.

    2014-01-01

    Highlights: • Technologies for recovery and use of industrial excess heat were investigated. • Heat harvesting, heat storage, heat utilization, and heat conversion technologies. • Heat recovery potential for Gävleborg County in Sweden was calculated. • Effects on global CO 2 emissions were calculated for future energy market scenarios. - Abstract: Industrial excess heat is a large untapped resource, for which there is potential for external use, which would create benefits for industry and society. Use of excess heat can provide a way to reduce the use of primary energy and to contribute to global CO 2 mitigation. The aim of this paper is to present different measures for the recovery and utilization of industrial excess heat and to investigate how the development of the future energy market can affect which heat utilization measure would contribute the most to global CO 2 emissions mitigation. Excess heat recovery is put into a context by applying some of the excess heat recovery measures to the untapped excess heat potential in Gävleborg County in Sweden. Two different cases for excess heat recovery are studied: heat delivery to a district heating system and heat-driven electricity generation. To investigate the impact of excess heat recovery on global CO 2 emissions, six consistent future energy market scenarios were used. Approximately 0.8 TWh/year of industrial excess heat in Gävleborg County is not used today. The results show that with the proposed recovery measures approximately 91 GWh/year of district heating, or 25 GWh/year of electricity, could be supplied from this heat. Electricity generation would result in reduced global CO 2 emissions in all of the analyzed scenarios, while heat delivery to a DH system based on combined heat and power production from biomass would result in increased global CO 2 emissions when the CO 2 emission charge is low

  17. The impact of a 50% reduction of solid waste disposal in Canada on methane emissions from landfills in 2000

    International Nuclear Information System (INIS)

    Patenaude, L.M.F.; Owen, G.T.; Barclay, J.A.

    1993-01-01

    Canada's Green Plan established a goal of 50% reduction in municipal solid waste (MSW) disposal between 1988 and the year 2000. Canada has also committed to stabilizing greenhouse gas emissions at 1990 levels by 2000. MSW landfills are targeted since they account for a significant portion of anthropogenic methane emissions. Current composition and quantities of MSW were estimated. Using five scenarios for achieving a 50% reduction of waste disposed, the quantities and composition of waste managed were estimated through to the year 2000. A first-order decay model was used to estimate methane emissions from landfills of each scenario by varying the methane generation potential (L o ) based on the amount of biodegradable carbon in the MSW stream. Despite the overall reduction in waste, methane emissions are still projected on increase between 1990 and 2000 for scenarios with 25 to 45% of waste going to landfill in 2000. The estimated increases in methane emissions range from 2% for the high composting scenario to 16% for the high landfill scenario. In general, emissions peak during the 1990's and are decreasing by 2000. The projected increase in emissions is due to the 65--75% contribution of MSW landfilled before 1990. In conclusion, a significant reduction in methane emissions from landfills by 2000 will require methane recovery systems in addition to MSW reduction initiatives

  18. Nitrous oxide emission reduction in temperate biochar-amended soils

    Science.gov (United States)

    Felber, R.; Hüppi, R.; Leifeld, J.; Neftel, A.

    2012-01-01

    Biochar, a pyrolysis product of organic residues, is an amendment for agricultural soils to improve soil fertility, sequester CO2 and reduce greenhouse gas (GHG) emissions. In highly weathered tropical soils laboratory incubations of soil-biochar mixtures revealed substantial reductions for nitrous oxide (N2O) and carbon dioxide (CO2). In contrast, evidence is scarce for temperate soils. In a three-factorial laboratory incubation experiment two different temperate agricultural soils were amended with green waste and coffee grounds biochar. N2O and CO2 emissions were measured at the beginning and end of a three month incubation. The experiments were conducted under three different conditions (no additional nutrients, glucose addition, and nitrate and glucose addition) representing different field conditions. We found mean N2O emission reductions of 60 % compared to soils without addition of biochar. The reduction depended on biochar type and soil type as well as on the age of the samples. CO2 emissions were slightly reduced, too. NO3- but not NH4+ concentrations were significantly reduced shortly after biochar incorporation. Despite the highly significant suppression of N2O emissions biochar effects should not be transferred one-to-one to field conditions but need to be tested accordingly.

  19. Carbon Dioxide Emissions Reduction Estimates: Potential Use of ...

    African Journals Online (AJOL)

    , substituting a fraction of the currently used petroleum fuels ... Out of the 1,249,170 tCO2e emitted in 2007, the emissions of CO2 from gasoline and diesel were 25 % and 39 %, respectively. 151,950 vehicles using gasoline were circulating on ...

  20. Reduction of CO/sub 2/ emissions through fuel economy standards for diesel cars in pakistan

    International Nuclear Information System (INIS)

    Memon, L.A.; Mehlia, T.M.I.; Hassan, M.H.

    2007-01-01

    In Pakistan, like many developing countries, the increasing prosperity and population growth are resulting in accelerated growth in vehicle population and vehicle kilometers traveled. This causes air pollution due to huge CO/sub 2/ emissions. Automobile fuel economy standards have proven to be one of the most effective tools to control oil demand thereby reducing the GHG (Green House Gas) emissions like CO/sub 2/, This study presents the investigation to apply fuel economy standards in Pakistan, in order to predict the potential reduction in CO/sub 2/ emissions and saving in fuel demand. The study is focused on only diesel cars and the data of diesel car owners for previous fifteen years is obtained from the related sources in Pakistan. A growth trend of diesel car owners was analyzed and the number of diesel car owners in future was predicted by applying database computer software. Calculations were made to study the effect of fuel economy standards in terms of saving in fuel demand and the reduction in CO/sub 2/ emissions. The results reveal the potential application of fuel economy standards and it was found that a cumulative amount of fuel 39266775 liters can be saved and CO/sub 2/ emissions can be reduced by 106021 tons at the end of 2011-2012, if fuel economy standards are implemented in 2008-2009. (author)

  1. Estimating CO{sub 2} Emission Reduction of Non-capture CO{sub 2} Utilization (NCCU) Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ji Hyun; Lee, Dong Woog; Gyu, Jang Se; Kwak, No-Sang; Lee, In Young; Jang, Kyung Ryoung; Shim, Jae-Goo [KEPCO Research Institute, Daejon (Korea, Republic of); Choi, Jong Shin [Korea East-West Power Co., LTD(ETP), Ulsan (Korea, Republic of)

    2015-10-15

    Estimating potential of CO{sub 2} emission reduction of non-capture CO{sub 2} utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue gas. For the estimating the CO{sub 2} emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle CO{sub 2} of 100 tons per day was performed, Also for the estimation of the indirect CO{sub 2} reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall CO{sub 2} emission was estimated as 48,862 ton per year based on the energy consumption for the production of NaHCO{sub 3} (7.4 GJ/tNaHCO{sub 3}). While for the NCCU technology, the direct CO{sub 2} reduction through the CO{sub 2} carbonation was estimated as 36,500 ton per year and the indirect CO{sub 2} reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of CO{sub 2} contained in the flue was energy efficient and could be one of the promising technology for the low CO{sub 2} emission technology.

  2. Short-rotation forestry of birch, maple, poplar and willow in Flanders (Belgium) II. Energy production and CO2 emission reduction potential

    International Nuclear Information System (INIS)

    Walle, Inge van de; Camp, Nancy van; Casteele, Liesbet van de; Verheyen, Kris; Lemeur, Raoul

    2007-01-01

    Belgium, being an EU country, has committed itself to a 7.5% reduction of greenhouse gas emissions during the first commitment period of the Kyoto Protocol. Within this framework, the Flemish government aims at reaching a share of 6% of renewable electricity in the total electricity production by 2010. In this work, the biomass production of birch, maple, poplar and willow in a short-rotation forestry (SRF) plantation after a 4-year growth period served as the base to calculate the amount of (electrical) energy that could be produced by this type of bioenergy crop in Flanders. The maximum amount of electricity that could be provided by SRF biomass was estimated at 72.9 GWh e year -1 , which only accounts for 0.16% of the total electricity production in this region. Although the energy output was rather low, the bioenergy production process under consideration appeared to be more energy efficient than energy production processes based on fossil fuels. The high efficiency of birch compared to the other species was mainly due to the high calorific value of the birch wood. The maximum CO 2 emission reduction potential of SRF plantations in Flanders was estimated at only 0.09% of the total annual CO 2 emission. The most interesting application of SRF in Flanders seemed to be the establishment of small-scale plantations, linked to a local combined heat and power plant. These plantations could be established on marginal arable soils or on polluted sites, and they could be of importance in the densely populated area of Flanders because of other environmental benefits, among which their function as (temporary) habitat for many species

  3. Potential Cost-Effective Opportunities for Methane Emission Abatement

    Energy Technology Data Exchange (ETDEWEB)

    Warner, Ethan [Joint Inst. for Strategic Energy Analysis, Golden, CO (United States); Steinberg, Daniel [Joint Inst. for Strategic Energy Analysis, Golden, CO (United States); Hodson, Elke [U.S. Department of Energy, Washington, DC (United States); Heath, Garvin [Joint Inst. for Strategic Energy Analysis, Golden, CO (United States)

    2015-08-01

    The energy sector was responsible for approximately 84% of carbon dioxide equivalent (CO2e) greenhouse gas (GHG) emissions in the U.S. in 2012 (EPA 2014a). Methane is the second most important GHG, contributing 9% of total U.S. CO2e emissions. A large portion of those methane emissions result from energy production and use; the natural gas, coal, and oil industries produce approximately 39% of anthropogenic methane emissions in the U.S. As a result, fossil-fuel systems have been consistently identified as high priority sectors to contribute to U.S. GHG reduction goals (White House 2015). Only two studies have recently attempted to quantify the abatement potential and cost associated with the breadth of opportunities to reduce GHG emissions within natural gas, oil, and coal supply chains in the United States, namely the U.S. Environmental Protection Agency (EPA) (2013a) and ICF (2014). EPA, in its 2013 analysis, estimated the marginal cost of abatement for non-CO2 GHG emissions from the natural gas, oil, and coal supply chains for multiple regions globally, including the United States. Building on this work, ICF International (ICF) (2014) provided an update and re-analysis of the potential opportunities in U.S. natural gas and oil systems. In this report we synthesize these previously published estimates as well as incorporate additional data provided by ICF to provide a comprehensive national analysis of methane abatement opportunities and their associated costs across the natural gas, oil, and coal supply chains. Results are presented as a suite of marginal abatement cost curves (MACCs), which depict the total potential and cost of reducing emissions through different abatement measures. We report results by sector (natural gas, oil, and coal) and by supply chain segment - production, gathering and boosting, processing, transmission and storage, or distribution - to facilitate identification of which sectors and supply chain

  4. Impact of agricultural emission reductions on fine-particulate matter and public health

    Science.gov (United States)

    Pozzer, Andrea; Tsimpidi, Alexandra P.; Karydis, Vlassis A.; de Meij, Alexander; Lelieveld, Jos

    2017-10-01

    A global chemistry-climate model has been used to study the impacts of pollutants released by agriculture on fine-particulate matter (PM2.5), with a focus on Europe, North America, East and South Asia. Simulations reveal that a relatively strong reduction in PM2.5 levels can be achieved by decreasing agricultural emissions, notably of ammonia (NH3) released from fertilizer use and animal husbandry. The absolute impact on PM2.5 reduction is strongest in East Asia, even for small emission decreases. Conversely, over Europe and North America, aerosol formation is not immediately limited by the availability of ammonia. Nevertheless, reduction of NH3 can also substantially decrease PM2.5 concentrations over the latter regions, especially when emissions are abated systematically. Our results document how reduction of agricultural emissions decreases aerosol pH due to the depletion of aerosol ammonium, which affects particle liquid phase and heterogeneous chemistry. Further, it is shown that a 50 % reduction of agricultural emissions could prevent the mortality attributable to air pollution by ˜ 250 000 people yr-1 worldwide, amounting to reductions of 30, 19, 8 and 3 % over North America, Europe, East and South Asia, respectively. A theoretical 100 % reduction could even reduce the number of deaths globally by about 800 000 per year.

  5. Evaluating the need for economic support policies in promoting greenhouse gas emission reduction measures in the building sector: The case of Greece

    International Nuclear Information System (INIS)

    Georgopoulou, E.; Sarafidis, Y.; Mirasgedis, S.; Balaras, C.A.; Gaglia, A.; Lalas, D.P.

    2006-01-01

    During the last decade the CO 2 emissions from the residential and tertiary sectors have been rising continuously. This is cause for concern but also an area to be targeted for emission reduction measures in national action plans. This paper proposes a methodological framework, using the Greek building sector (characterized by an aging building stock constructed mostly in the period before 1980) as a case study for the examination of the economic attractiveness of possible measures, which incorporates crucial parameters such as local climate, use of buildings, age of building stock, etc. that affect the energy conservation potential and consequently the economic performance of available measures. Utilizing this framework, the approach is able to classify measures into three categories, namely 'win-win' cases (i.e. where the implementation of emission reduction measures presents a net economic benefit for end-users), measures that require the implementation of appropriate economic support policies in order to make them economically attractive for end-users, and measures that have excessive cost. The results indicate that the emissions reduction potential of 'win-win' cases is significant. They also demonstrate how individual measures can provide significant reductions if carefully targeted economic support policies are applied. Finally, sensitivity analyses performed with respect to the discount rate applied indicate that it has a substantial impact on the economic performance of some measures and consequently on the magnitude of the 'win-win' potential associated to emissions reduction

  6. Stockholm CHP potential - An opportunity for CO2 reductions?

    International Nuclear Information System (INIS)

    Danestig, Maria; Gebremehdin, Alemayehu; Karlsson, Bjoern

    2007-01-01

    The potential for combined heat and power (CHP) generation in Stockholm is large and a total heat demand of about 10 TWh/year can be met in a renewed large district heating system. This model of the Stockholm district heating system shows that CHP generation can increase from 8% in 2004 to 15.5% of the total electricity generation in Sweden. Increased electricity costs in recent years have awakened an interest to invest in new electricity generation. Since renewable alternatives are favoured by green certificates, bio-fuelled CHP is most profitable at low electricity prices. Since heat demand in the district heating network sets the limit for possible electricity generation, a CHP alternative with a high electricity to heat ratio will be more profitable at when electricity prices are high. The efficient energy use in CHP has the potential to contribute to reductions in carbon dioxide emissions in Europe, when they are required and the European electricity market is working perfectly. The potential in Stockholm exceeds Sweden's undertakings under the Kyoto protocol and national reduction goals. (author)

  7. Baseline options and greenhouse gas emission reduction of clean development mechanism project in urban solid waste management

    Energy Technology Data Exchange (ETDEWEB)

    Hiramatsu, Ai; Hanaki, K. [Department of Urban Engineering, School of Engineering, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan); Aramaki, T. [Research Center for Advanced Science and Technology, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904(Japan)

    2003-07-01

    The Clean Development Mechanism (CDM) was adopted in the Kyoto Protocol as a flexibility mechanism to reduce greenhouse gases (GHGs) and has been started with such projects as improving efficiency of individual technology. Although applying various countermeasures to urban areas has significant potentials for reducing GHGs, these countermeasures have not been proposed as CDM projects in the practical stage. A CDM project needs to be validated that it will reduce GHGs additionally compared with a baseline, that is, a predictive value of GHG emissions in the absence of the project. This study examined the introduction of solid waste incineration with electricity generation into three different cities, A, B and C. The main solid waste treatment and the main fuel source are landfill and coal, respectively, in City A, incineration and natural gas in City B, and landfill and hydro in City C. GHG emission reductions of each city under several baseline options assumed here were evaluated. Even if the same technology is introduced, the emission reduction greatly varies according to the current condition and the future plan of the city: 1043-1406 kg CO2/t of waste in City A, 198-580 kg CO2/t in City B, and wide range of zero to over 1000 kg CO2/t in City C. Baseline options also cause significant difference in the emission reduction even in the same city (City C). Incinerating solid waste after removing plastics by source separation in City B increased GHG emission reduction potential up to 730-900 kg CO2/t, which enhances the effectiveness as a CDM project.

  8. Technical and Economic Aspects of Low Emission Reduction in Poland

    Science.gov (United States)

    Dzikuć, M.; Łasiński, K.

    2017-12-01

    The paper presents the problem of excessive air pollution in Poland caused mainly by low emission. The emission arises in result of heating flats by means of old and energetically inefficient heating installations. In Poland and Bulgaria the inhaled air is of the worst quality out of all EU countries. The paper presents economic and technical problems related to low emission occurring during the combustion of solid fuels in local boiler houses. Furthermore, the most significant economic issues, connected with the reduction of low emission are discussed, as well as technological possibilities of efficient reduction of the amount of pollution in the atmosphere. Conclusions are presented at the end of the article.

  9. Potential for waste reduction

    International Nuclear Information System (INIS)

    Warren, J.L.

    1990-01-01

    The author focuses on wastes considered hazardous under the Resource Conservation and Recovery Act. This chapter discusses wastes that are of interest as well as the factors affecting the quantity of waste considered available for waste reduction. Estimates are provided of the quantities of wastes generated. Estimates of the potential for waste reduction are meaningful only to the extent that one can understand the amount of waste actually being generated. Estimates of waste reduction potential are summarized from a variety of government and nongovernment sources

  10. Simulation-Based Analysis of the Potential of Alternative Fuels towards Reducing CO2 Emissions from Aviation

    Directory of Open Access Journals (Sweden)

    Karsten Kieckhäfer

    2018-01-01

    Full Text Available The mid-term framework of global aviation is shaped by air travel demand growth rates of 2–5% p.a. and ambitious targets to reduce aviation-related CO2 emissions by up to 50% until 2050. Alternative jet fuels such as bio- or electrofuels can be considered as a potential means towards low-emission aviation. While these fuels offer significant emission reduction potential, their market success depends on manifold influencing factors like the maturity of the production technology or the development of the price of conventional jet fuel. To study the potential for adoption of alternative jet fuels in aviation and the extent to which alternative fuels can contribute to the reduction targets, we deploy a System Dynamics approach. The results indicate that the adoption of alternative fuels and therefore their potential towards low-emissions aviation is rather limited in most scenarios considered since current production processes do not allow for competitive prices compared to conventional jet fuel. This calls for the development of new production processes that allow for economic feasibility of converting biomass or hydrogen into drop-in fuels as well as political measures to promote the adoption of alternative fuels.

  11. Atmospheric pollution reduction effect and regional predicament: An empirical analysis based on the Chinese provincial NOx emissions.

    Science.gov (United States)

    Ding, Lei; Liu, Chao; Chen, Kunlun; Huang, Yalin; Diao, Beidi

    2017-07-01

    Atmospheric pollution emissions have become a matter of public concern in recent years. However, most of the existing researches on NOx pollution are from the natural science and technology perspective, few studies have been conducted from an economic point, and regional differences have not been given adequate attention. This paper adopts provincial panel data from 2006 to 2013 and the LMDI model to analyze the key driving factors and regional dilemmas of NOx emissions. The results show that significant regional disparities still exit on NO x emissions and its reduction effect 27 provinces didn't accomplish their corresponding reduction targets. Economic development factor is the dominating driving factor of NO x emissions during the study period, while energy efficiency and technology improvement factors offset total NO x emissions in the majority of provinces. In addition, the industrial structure factor plays a more significant role in reducing the NO x emissions after 2011. Therefore, the government should consider all these factors as well as regional heterogeneity in developing appropriate pollution mitigating policies. It's necessary to change NOx emissions control attitude from original key areas control to divided-zone control, not only attaches great importance to the reduction of the original key areas, but also emphasizes the new potential hotspots with high NO x emissions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Analysis of Global CCS Technology, Regulations and Its Potential for Emission Reduction with Focus on China

    OpenAIRE

    Fan, Ying; Zhu, Lei; Zhang, Xiaobing

    2011-01-01

    This paper introduces the development of Carbon Capture and Storage (CCS) technology, the progress in CCS demonstration projects, and regulations and policies related to CCS. Barriers and limitations for the large-scale deployment of CCS are discussed. CCS and different technological solutions for emission reduction (e.g., energy conservation and renewable energy) are compared. The analysis shows that China should carefully evaluate the negative impacts of CCS deployment and needs to enhance ...

  13. Greenhouse gas emissions reduction in China by cleaner coal technology towards 2020

    DEFF Research Database (Denmark)

    Zhao, Guangling; Chen, Sha

    2015-01-01

    the complete life cycle modeling of CCTs. The advanced technologies include super-critical (super-C), ultra super-critical (USC) and integrated gasification combined cycle (IGCC). The results show that the higher efficiency technologies have lower potential impacts. Compared with the average level of power...... generation technology, CO2 emissions reduction is 6.4% for super-C, 37.4% for USC and 61.5% for IGCC. Four coal power scenarios are developed based on the assumption of potential investment power for CCTs in 2020, which are super-C, USC, USC and old low efficiency generation substitution by USC, IGCC...... and carbon capture and storage (CCS). The CO2 emissions intensity is 1.93 kg/kWh for super-C, 1.69 kg/kWh for USC, 1.59 kg/kWh for USC + replacement and 1.29 kg/kWh for IGCC + CCS. The CO2 emissions intensity was 1.95 kg/kWh in 2010, which had decreased 5.5% compared with the level in 2005. The energy...

  14. Impact of agricultural emission reductions on fine-particulate matter and public health

    Directory of Open Access Journals (Sweden)

    A. Pozzer

    2017-10-01

    Full Text Available A global chemistry-climate model has been used to study the impacts of pollutants released by agriculture on fine-particulate matter (PM2.5, with a focus on Europe, North America, East and South Asia. Simulations reveal that a relatively strong reduction in PM2.5 levels can be achieved by decreasing agricultural emissions, notably of ammonia (NH3 released from fertilizer use and animal husbandry. The absolute impact on PM2.5 reduction is strongest in East Asia, even for small emission decreases. Conversely, over Europe and North America, aerosol formation is not immediately limited by the availability of ammonia. Nevertheless, reduction of NH3 can also substantially decrease PM2.5 concentrations over the latter regions, especially when emissions are abated systematically. Our results document how reduction of agricultural emissions decreases aerosol pH due to the depletion of aerosol ammonium, which affects particle liquid phase and heterogeneous chemistry. Further, it is shown that a 50 % reduction of agricultural emissions could prevent the mortality attributable to air pollution by  ∼ 250 000 people yr−1 worldwide, amounting to reductions of 30, 19, 8 and 3 % over North America, Europe, East and South Asia, respectively. A theoretical 100 % reduction could even reduce the number of deaths globally by about 800 000 per year.

  15. Mobil emission reduction credits for natural gas vehicle programs

    International Nuclear Information System (INIS)

    Baker, G.F.

    1993-01-01

    Since the passage of the Clean Air Act Amendments in 1990, there has been increasing interest among regulators and business interests alike in innovative, market-based strategies to air quality control. In particular, larger metropolitan areas have begun to examine marketable emission reduction credit (ERC) programs. These programs limit the total allowable emissions in a non-attainment area, allocate these emission open-quotes creditsclose quotes among sources in the region, and allow the sources to redistribute their allowances through trading. This approach provides for the most cost-effective distribution of control burdens among affected sources, taking advantage of the differences in marginal control costs. Some control measures applied to mobile sources may be significantly less expensive than those applied to stationary sources, making mobile sources an excellent candidate for inclusion in an ERC program. However, there are several potential problems involving quantification, enforcement, and credit trading issues that hinder the development of mobile source ERC programs. This paper will evaluate those obstacles and discuss how they are being addressed in a Natural Gas Vehicle (NGV) program currently under development for the Houston ozone non-attainment area. Specifically, the study will outline the credit validation (i.e., quantification) procedure, including baseline emission determination and emission testing for each NGV in the program. In addition, the study will describe the vehicle/fuel consumption tracking system, and discuss issues related to credit trading with stationary sources. Finally, observations are made concerning the applicability of mobile ERC programs for other emission control measures such as old vehicle scrappage and vehicle Inspection and Maintenance programs

  16. No-lose targets as an option to integrate non-Annex I countries in global emission reduction efforts. A game-theoretical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Duscha, Vicki

    2012-07-01

    Substantial greenhouse gas emission reductions of 50% and more below 1990 levels by 2050 are necessary, to limit mean temperature increase below 2 C above pre-industrial levels. While the Kyoto Protocol foresees emission reduction targets for Annex I countries only, current and projected greenhouse gas emissions, as well as the growing economic importance of emerging economies call for an integration of non-Annex I countries in global reduction efforts. No-lose targets set emission reduction targets and define incentives for meeting the target, in contrast to binding reduction targets that use penalties to ensure compliance. One form of incentive is the participation in an international emissions trading market. While a few conceptual and quantitative analyses of no-lose targets can be found in the literature, economic analyses have not been carried out so far. In this thesis, two theoretical frameworks are introduced to analyze the potential of no-lose targets to contribute to global emission reduction efforts. First, a two-player, two-stage model is developed to model a non-Annex I country's participation decision and derive the contribution to global emission reductions. Then a two-player participation game is introduced to analyze the effects that the participation decision of one non-Annex I country has on another non-Annex I country also facing a no-lose target. Two market forms, a perfectly competitive market, and a market with market power on the side of the non-Annex I country are analyzed. In order to complement the highly stylized theoretical frameworks, a quantitative analysis applying marginal abatement cost curves is conducted to estimate the contribution of no-lose targets to reaching the 2 C target. The analyses show that no-lose targets can result in substantial contributions from non-Annex I countries to global emission reductions, in particular if the reduction potential in the non-Annex I countries is large, compared to that of the Annex I

  17. Influence on the oxidative potential of a heavy-duty engine particle emission due to selective catalytic reduction system and biodiesel blend

    International Nuclear Information System (INIS)

    Godoi, Ricardo H.M.; Polezer, Gabriela; Borillo, Guilherme C.; Brown, Andrew; Valebona, Fabio B.; Silva, Thiago O.B.; Ingberman, Aline B.G.; Nalin, Marcelo; Yamamoto, Carlos I.; Potgieter-Vermaak, Sanja; Penteado Neto, Renato A.; Marchi, Mary Rosa R. de; Saldiva, Paulo H.N.; Pauliquevis, Theotonio; Godoi, Ana Flavia L.

    2016-01-01

    Although the particulate matter (PM) emissions from biodiesel fuelled engines are acknowledged to be lower than those of fossil diesel, there is a concern on the impact of PM produced by biodiesel to human health. As the oxidative potential of PM has been suggested as trigger for adverse health effects, it was measured using the Electron Spin Resonance (OP"E"S"R) technique. Additionally, Energy Dispersive X-ray Fluorescence Spectroscopy (EDXRF) was employed to determine elemental concentration, and Raman Spectroscopy was used to describe the amorphous carbon character of the soot collected on exhaust PM from biodiesel blends fuelled test-bed engine, with and without Selective Catalytic Reduction (SCR). OP"E"S"R results showed higher oxidative potential per kWh of PM produced from a blend of 20% soybean biodiesel and 80% ULSD (B20) engine compared with a blend of 5% soybean biodiesel and 95% ULSD (B5), whereas the SCR was able to reduce oxidative potential for each fuel. EDXRF data indicates a correlation of 0.99 between concentration of copper and oxidative potential. Raman Spectroscopy centered on the expected carbon peaks between 1100 cm"−"1 and 1600 cm"−"1 indicate lower molecular disorder for the B20 particulate matter, an indicative of a more graphitic carbon structure. The analytical techniques used in this study highlight the link between biodiesel engine exhaust and increased oxidative potential relative to biodiesel addition on fossil diesel combustion. The EDXRF analysis confirmed the prominent role of metals on free radical production. As a whole, these results suggest that 20% of biodiesel blends run without SCR may pose an increased health risk due to an increase in OH radical generation. - Highlights: • PM emission from biodiesel burning may be more harmful to human health than diesel. • Euro V (SCR) engine fuelled with B5 and B20 tested in a bench dynamometer • Electron Spin Resonance (ESR) to access the oxidative potential of PM emission

  18. Influence on the oxidative potential of a heavy-duty engine particle emission due to selective catalytic reduction system and biodiesel blend

    Energy Technology Data Exchange (ETDEWEB)

    Godoi, Ricardo H.M., E-mail: rhmgodoi@ufpr.br [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Polezer, Gabriela; Borillo, Guilherme C. [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Brown, Andrew [Division of Chemistry and Environmental Science, School of Science and the Environment, Manchester Metropolitan University, Manchester (United Kingdom); Valebona, Fabio B.; Silva, Thiago O.B.; Ingberman, Aline B.G. [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Nalin, Marcelo [LAVIE - Institute of Chemistry, São Paulo State University - UNESP, Araraquara (Brazil); Yamamoto, Carlos I. [Chemical Engineering Department, Federal University of Parana, Curitiba, PR (Brazil); Potgieter-Vermaak, Sanja [Division of Chemistry and Environmental Science, School of Science and the Environment, Manchester Metropolitan University, Manchester (United Kingdom); Penteado Neto, Renato A. [Vehicle Emissions Laboratory, Institute of Technology for Development (LACTEC), Curitiba, PR (Brazil); Marchi, Mary Rosa R. de [Analytical Chemistry Department, Institute of Chemistry, São Paulo State University - UNESP, Araraquara (Brazil); Saldiva, Paulo H.N. [Laboratory of Experimental Air Pollution, Department of Pathology, School of Medicine, University of São Paulo, São Paulo (Brazil); Pauliquevis, Theotonio [Department of Natural and Earth Sciences, Federal University of São Paulo, Diadema (Brazil); Godoi, Ana Flavia L. [Environmental Engineering Department, Federal University of Parana, Curitiba, PR (Brazil)

    2016-08-01

    Although the particulate matter (PM) emissions from biodiesel fuelled engines are acknowledged to be lower than those of fossil diesel, there is a concern on the impact of PM produced by biodiesel to human health. As the oxidative potential of PM has been suggested as trigger for adverse health effects, it was measured using the Electron Spin Resonance (OP{sup ESR}) technique. Additionally, Energy Dispersive X-ray Fluorescence Spectroscopy (EDXRF) was employed to determine elemental concentration, and Raman Spectroscopy was used to describe the amorphous carbon character of the soot collected on exhaust PM from biodiesel blends fuelled test-bed engine, with and without Selective Catalytic Reduction (SCR). OP{sup ESR} results showed higher oxidative potential per kWh of PM produced from a blend of 20% soybean biodiesel and 80% ULSD (B20) engine compared with a blend of 5% soybean biodiesel and 95% ULSD (B5), whereas the SCR was able to reduce oxidative potential for each fuel. EDXRF data indicates a correlation of 0.99 between concentration of copper and oxidative potential. Raman Spectroscopy centered on the expected carbon peaks between 1100 cm{sup −1} and 1600 cm{sup −1} indicate lower molecular disorder for the B20 particulate matter, an indicative of a more graphitic carbon structure. The analytical techniques used in this study highlight the link between biodiesel engine exhaust and increased oxidative potential relative to biodiesel addition on fossil diesel combustion. The EDXRF analysis confirmed the prominent role of metals on free radical production. As a whole, these results suggest that 20% of biodiesel blends run without SCR may pose an increased health risk due to an increase in OH radical generation. - Highlights: • PM emission from biodiesel burning may be more harmful to human health than diesel. • Euro V (SCR) engine fuelled with B5 and B20 tested in a bench dynamometer • Electron Spin Resonance (ESR) to access the oxidative potential of

  19. Low-Carbon Watershed Management: Potential of Greenhouse Gas Reductions from Wastewater Treatment in Rural Vietnam

    Science.gov (United States)

    Mohan, Geetha; Jian, Pu; Takemoto, Kazuhiko; Fukushi, Kensuke

    2016-01-01

    Currently in many cities and rural areas of Vietnam, wastewater is discharged to the environment without any treatment, which emits considerable amount of greenhouse gas (GHG), particularly methane. In this study, four GHG emission scenarios were examined, as well as the baseline scenario, in order to verify the potential of GHG reduction from domestic wastewater with adequate treatment facilities. The ArcGIS and ArcHydro tools were employed to visualize and analyze GHG emissions resulting from discharge of untreated wastewater, in rural areas of Vu Gia Thu Bon river basin, Vietnam. By applying the current IPCC guidelines for GHG emissions, we found that a reduction of GHG emissions can be achieved through treatment of domestic wastewater in the studied area. Compared with baseline scenario, a maximum 16% of total GHG emissions can be reduced, in which 30% of households existing latrines are substituted by Japanese Johkasou technology and other 20% of domestic wastewater is treated by conventional activated sludge. PMID:27699202

  20. A Summary of Research on Energy Saving and Emission Reduction of Transportation

    Science.gov (United States)

    Cheng, Dongxiang; Wu, Lufen

    2017-12-01

    Road transport is an important part of transportation, and road in the field of energy-saving emission reduction is a very important industry. According to the existing problems of road energy saving and emission reduction, this paper elaborates the domestic and international research on energy saving and emission reduction from three aspects: road network optimization, pavement material and pavement maintenance. Road network optimization may be overlooked, and the research content is still relatively preliminary; pavement materials mainly from the asphalt pavement temperature mixed asphalt technology research; pavement maintenance technology development is relatively comprehensive.

  1. Achieving carbon emission reduction through industrial and urban symbiosis: A case of Kawasaki

    International Nuclear Information System (INIS)

    Dong, Huijuan; Ohnishi, Satoshi; Fujita, Tsuyoshi; Geng, Yong; Fujii, Minoru; Dong, Liang

    2014-01-01

    Industry and fossil fuel combustion are the main sources for urban carbon emissions. Most studies focus on energy consumption emission reduction and energy efficiency improvement. Material saving is also important for carbon emission reduction from a lifecycle perspective. IS (Industrial symbiosis) and U r S (urban symbiosis) have been effective since both of them encourage byproduct exchange. However, quantitative carbon emission reduction evaluation on applying them is still lacking. Consequently, the purpose of this paper is to fill such a gap through a case study in Kawasaki Eco-town, Japan. A hybrid LCA model was employed to evaluate to the lifecycle carbon footprint. The results show that lifecycle carbon footprints with and without IS and U r S were 26.66 Mt CO 2 e and 30.92 Mt CO 2 e, respectively. The carbon emission efficiency was improved by 13.77% with the implementation of IS and U r S. The carbon emission reduction was mainly from “iron and steel” industry, cement industry and “paper making” industry, with figures of 2.76 Mt CO 2 e, 1.16 Mt CO 2 e and 0.34 Mt CO 2 e, respectively. Reuse of scrape steel, blast furnace slag and waste paper are all effective measures for promoting carbon emission reductions. Finally, policy implications on how to further promote IS and U r S are presented. - Highlights: • We evaluate carbon emission reduction of industrial and urban symbiosis (IS/U r S). • Hybrid LCA model was used to evaluate lifecycle carbon footprint. • Carbon emission efficiency was improved by 13.77% after applying IS/U r S. • The importance of U r S in responding carbon reduction was addressed in the paper

  2. The economic payoff for global warming emissions reduction

    International Nuclear Information System (INIS)

    Shelton, Sam V.; Schaefer, Laura A.

    1999-01-01

    In order to meet the 1997 Kyoto treaty targets, U.S. carbon emissions must be severely curtailed. While top-down economic models predict that cutting carbon emissions will produce high costs, higher efficiency technology, such as residential electric heat pump water heaters, can cause carbon reduction to become profitable. In a single-family residence, replacing an electric resistance water heater with a heat pump water heater can reduce carbon emissions by 0.6 tons per year and produce savings of $1200 over a twelve-year period., rather than costs. National implementation of this single technology would reduce electric power plant carbon emissions by 5 percent. (Author)

  3. CO2 emissions mitigation potential of solar home systems under clean development mechanism in India

    International Nuclear Information System (INIS)

    Purohit, Pallav

    2009-01-01

    The Government of India has taken several initiatives for promotion of solar energy systems in the country during the last two decades. A variety of policy measures have been adopted which include provision of financial and fiscal incentives to the potential users of solar energy systems however, only 0.4 million solar home systems (SHSs) have been installed so far that is far below their respective potential. One of the major barriers is the high costs of investments in these systems. The clean development mechanism (CDM) of the Kyoto Protocol provides industrialized (Annex-I) countries with an incentive to invest in emission reduction projects in developing (non-Annex-I) countries to achieve a reduction in carbon dioxide (CO 2 ) emissions at lowest cost that also promotes sustainable development in the host country. SHSs could be of interest under the CDM because they directly displace greenhouse gas (GHG) emissions while contributing to sustainable rural development, if developed correctly. In this study an attempt has been made to estimate the CO 2 mitigation potential of SHSs under CDM in India.

  4. Maximum Regional Emission Reduction Potential in Residential Sector Based on Spatial Distribution of Population and Resources

    Science.gov (United States)

    Winijkul, E.; Bond, T. C.

    2011-12-01

    In the residential sector, major activities that generate emissions are cooking and heating, and fuels ranging from traditional (wood) to modern (natural gas, or electricity) are used. Direct air pollutant emissions from this sector are low when natural gas or electricity are the dominant energy sources, as is the case in developed countries. However, in developing countries, people may rely on solid fuels and this sector can contribute a large fraction of emissions. The magnitude of the health loss associated with exposure to indoor smoke as well as its concentration among rural population in developing countries have recently put preventive measures high on the agenda of international development and public health organizations. This study focuses on these developing regions: Central America, Africa, and Asia. Current and future emissions from the residential sector depend on both fuel and cooking device (stove) type. Availability of fuels, stoves, and interventions depends strongly on spatial distribution. However, regional emission calculations do not consider this spatial dependence. Fuel consumption data is presented at country level, without information about where different types of fuel are used. Moreover, information about stove types that are currently used and can be used in the future is not available. In this study, we first spatially allocate current emissions within residential sector. We use Geographic Information System maps of temperature, electricity availability, forest area, and population to determine the distribution of fuel types and availability of stoves. Within each country, consumption of different fuel types, such as fuelwood, coal, and LPG is distributed among different area types (urban, peri-urban, and rural area). Then, the cleanest stove technologies which could be used in the area are selected based on the constraints of each area, i.e. availability of resources. Using this map, the maximum emission reduction compared with

  5. GHG emission scenarios in Asia and the world: The key technologies for significant reduction

    International Nuclear Information System (INIS)

    Akashi, Osamu; Hijioka, Yasuaki; Masui, Toshihiko; Hanaoka, Tatsuya; Kainuma, Mikiko

    2012-01-01

    In this paper, we explore GHG emission scenarios up to 2050 in Asia and the world as part of the Asian Modeling Exercise and assess technology options for meeting a 2.6 W/m 2 radiative forcing target using AIM/Enduse[Global] and AIM/Impact[Policy]. Global GHG emissions in 2050 are required to be reduced by 72% relative to a reference scenario, which corresponds to a 57% reduction from the 2005 level, in order to meet the above target. Energy intensity improvement contributes a lot to curbing CO 2 emission in the short-term. Meanwhile, carbon intensity reduction and CO 2 capture play a large role for further emission reduction in the mid to long-term. The top five key technologies in terms of reduction amount are CCS, solar power generation, wind power generation, biomass power generation and biofuel, which, in total, account for about 60% of global GHG emissions reduction in 2050. We implement additional model runs, each of which enforced limited availability of one of the key technology. The result shows that the 2.6 W/m 2 target up to 2050 is achievable even if availability of any one of the key technologies is limited to half the level achieved in the default simulation. However, if the use of CCS or biomass is limited, the cumulative GHG abatement cost until 2050 increases considerably. Therefore CCS and biomass have a vital role in curbing costs to achieve significant emission reductions. - Highlights: ► We explore GHG emission scenarios up to 2050 in Asia and the world. ► Significant GHG emission reduction is required to limit radiative forcing at low level. ► We assess technology options for achieving significant GHG emission reduction. ► CCS, solar power, wind power, and biomass are the key technologies for reduction. ► Especially, CCS and biomass play a vital role in curbing costs to achieve significant emission reductions.

  6. Emission reduction trading - a power marketer's perspective

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, M. (Powerex Inc., Vancouver, BC (Canada))

    1999-01-01

    The current situation , and the short-term and long-term outlook in emission reduction trading are reviewed from the point of view of a power marketer. The author's view is that while the concept of emission reduction credit (ERC) is easy enough to understand, i.e. a series of measures to reduce carbon dioxide production and enhance carbon sequestration, there is no standard definition, although there are a number of models under consideration. What is being sought is clear ownership and title, a clear understanding of what qualifies as a credit, credit for early action, commodity specifications and the ability to hedge. The author predicts that in the short-tem, industry will experiment with different types of transactions to gain experience and seek partners who are willing to share risk and development cost. In the longer-term, emission reduction credits will be bought and sold as commodities and traded, swapped or exchanged as part of a portfolio in bilateral trade transactions, and used in hedging against future liabilities.

  7. Assessing "dangerous climate change": required reduction of carbon emissions to protect young people, future generations and nature.

    Directory of Open Access Journals (Sweden)

    James Hansen

    Full Text Available We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth's measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today's young people, future generations, and nature. A cumulative industrial-era limit of ∼500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of ∼1000 GtC, sometimes associated with 2°C global warming, would spur "slow" feedbacks and eventual warming of 3-4°C with disastrous consequences. Rapid emissions reduction is required to restore Earth's energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels.

  8. Assessing "dangerous climate change": required reduction of carbon emissions to protect young people, future generations and nature.

    Science.gov (United States)

    Hansen, James; Kharecha, Pushker; Sato, Makiko; Masson-Delmotte, Valerie; Ackerman, Frank; Beerling, David J; Hearty, Paul J; Hoegh-Guldberg, Ove; Hsu, Shi-Ling; Parmesan, Camille; Rockstrom, Johan; Rohling, Eelco J; Sachs, Jeffrey; Smith, Pete; Steffen, Konrad; Van Susteren, Lise; von Schuckmann, Karina; Zachos, James C

    2013-01-01

    We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth's measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today's young people, future generations, and nature. A cumulative industrial-era limit of ∼500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of ∼1000 GtC, sometimes associated with 2°C global warming, would spur "slow" feedbacks and eventual warming of 3-4°C with disastrous consequences. Rapid emissions reduction is required to restore Earth's energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels.

  9. Assessing 'Dangerous Climate Change': Required Reduction of Carbon Emissions to Protect Young People, Future Generations and Nature

    Science.gov (United States)

    Hansen, James; Kharecha, Pushker; Sato, Makiko; Masson-Demotte, Valerie; Ackerman, Frank; Beerling, David J.; Hearty, Paul J.; Hoegh-Guldberg, Ove; Hsu, Shi-Ling; Parmesan, Camille; hide

    2013-01-01

    We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth's measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today's young people, future generations, and nature. A cumulative industrial-era limit of approx.500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of approx.1000 GtC, sometimes associated with 2 C global warming, would spur "slow" feedbacks and eventual warming of 3-4 C with disastrous consequences. Rapid emissions reduction is required to restore Earth's energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels.

  10. Calculation and reduction of the sound emissions of overhead power lines

    International Nuclear Information System (INIS)

    Straumann, U.

    2007-01-01

    In this dissertation, Ulrich Straumann of the Swiss Federal Institute of Technology in Zurich, Switzerland, discusses the reduction of sound emissions from overhead power lines. Corona-discharges occur during wet weather or when foggy or icing conditions prevail. Apart from these wide-band crackling noises, low-frequency, tonal emissions also occur. The CONOR (Corona Noise Reduction) project examined these emissions at a frequency of twice the mains frequency and looked for economically feasible solutions to the problems caused by them. The source of these emissions and the mechanisms causing them are discussed. Also, ways of calculating their strength are presented. The effects of varying cable geometry and construction are discussed, as are hydrophilic coatings that could be used to reduce sound emissions.

  11. Carbon emissions reduction in China's food industry

    International Nuclear Information System (INIS)

    Lin, Boqiang; Lei, Xiaojing

    2015-01-01

    In this paper, we evaluate the changes in carbon dioxide emissions from energy consumption in China's food industry from 1986 to 2010 based on the Logarithmic Mean Divisia Index (LMDI) method. The results show that energy intensity (EI) and industrial activity (IA) are the main determinants of the changes in carbon dioxide. Energy intensity (EI) contributes to decrease in emissions within 25 years while industrial activity (IA) acts in a positive way to increase the emissions level. Industry scale (IS) mostly contributes to increase in emissions except for the time interval 1996–2000. However, for both carbon intensity (CI) and energy structure (ES), they have a volatile but not significant influence on emissions in the different time intervals. To further understand the effects, we analyze the cumulative emission during the whole period 1986–2010. The results further testify that energy intensity and industrial activity are the most important factors affecting reduction and growth of carbon emissions. The results indicate that efforts to reduce emission in China's food industry should focus on the enhancement of energy efficiency, the optimization of industrial scale and the restructuring energy use. Finally, recommendations are provided for the reduction of carbon dioxide in China's food industry. - Highlights: • We analyze the energy consumption and CO 2 emissions in China's food industry. • LMDI decomposition analysis is conducted for finding out the driving forces. • Industrial activity is the main driving force of CO 2 emissions in this industry. • Energy intensity is the main factor mitigating carbon emissions in this industry. • Main advice: improving energy efficiency, optimizing industrial scale.

  12. CO2 sequestration. World CO2 emission reduction by forest plantations on agricultural land up to 2050

    International Nuclear Information System (INIS)

    Dameron, V.; Barbier, C.; Riedacker, A.

    2005-01-01

    The main objective of this study was to determine the possible contribution on CO 2 emission reductions of new forest plantations on agricultural land which may become available in the world from now to 2050. Emission reductions have been calculated by taking into account potential changes in carbon stocks on afforested land (in biomass and soil) and replacement with biomass of fossil fuel and material such as steel, aluminium or concrete. Increase of carbon stocks in wood as building material and final conversion of wood recycled from buildings into energy to replace fossil fuel have also been taken into account. CO 2 emission reductions (or carbon benefits) from afforested agricultural land become significant only after 2030 or 2050, and even at a later stage with long rotations. In the case of the latter, about 100 years are needed to get the full benefits. Forest plantations can therefore only be considered as long term options

  13. Reduction of greenhouse gas emissions in the rape cultivation with special consideration of nitrogen fertilization

    International Nuclear Information System (INIS)

    Heilmann, Hubert; Riemer, Doerte

    2017-01-01

    Involved into the research project ''Mitigation of greenhouse gas emissions in oilseed rape cropping with special consideration of nitrogen fertilizing'' regional specific GHG cropping emissions according to benchmark and regional experts are calculated by using a calculation method developed in cooperation with IFEU and according to IPCC (2006). The following results are achieved for 35 German NUTS2-regions: - nitrogen fertilization is the main influence for GHG emission reduction; - the use of low-emission nitrogen fertilizers is worth for GHG emission reduction; - without increasing the nutrient efficiency of organic fertilizers, GHG emission reductions are difficult to achieve in many regions; - GHG emission reduction/climate protection and realization of the WRRL or N-Saldo reduction come up to the same aim; - economic consequences of restrictive carbon mitigation can be compensated by slight price surcharges for certified raw material.

  14. E.U.: better emission reduction than expected

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    The 15 countries that formed the European Union at the time of the Kyoto protocol implementation, compelled themselves to reduce by 8%, on average and per year for the 2008-2012 period and with reference to a standard year that was for most European countries 1990, their greenhouse gas emissions. The European Union has recently stated that the reduction will be better than expected and will reach 14.2% on average per year if the member states realize their projects concerning reforestation or the purchase of international carbon emission allowances. (A.C.)

  15. Combining IPPC and emission trading: An assessment of energy efficiency and CO2 reduction potentials in the Austrian paper industry

    International Nuclear Information System (INIS)

    Starzer, Otto; Dworak, Oliver

    2005-01-01

    In the frame of an innovative project partnership E.V.A. - the Austrian Energy Agency accompanied the Austrian paper industry for the last 2.5 years in developing a branch specific climate change strategy. Within the scope of this project an assessment of the energy efficiency status of the branch was carried out as well as an evaluation of still realisable energy savings and CO 2 reduction potentials. The paper presents the methodology applied, which combines a top down approach (benchmarking and best practice) with a bottom up approach (on-site interviews and energy audits), supported by a huge data collection process. Within the benchmarking process all Austrian paper industry installations affected by the EU emission trading directive were benchmarked against their respective IPPC/BAT values. Furthermore an extensive list of best practice examples derived from existing or ongoing studies was compared with the energy efficiency measures already carried out by the companies ('early actions'). These theory-oriented findings were complemented by several on-site interviews with the respective energy managers as well as by detailed energy audits carried out by a consulting company, covering in total more than 80% of the Austrian paper industry's CO 2 emissions. The paper concludes with the main results of the project, presenting the pros and cons of working with IPPC documents and BAT values in terms of energy efficiency assessments. Recommendations are presented on how to improve the allocation exercise for the next emission trading period from 2008 to 2012

  16. A healthy reduction in oil consumption and carbon emissions

    International Nuclear Information System (INIS)

    Higgins, P.A.T.; Higgins, Millicent

    2005-01-01

    Reliance on oil as an energy source for private transportation produces increasingly unfavorable social, political and environmental conditions including climate change, dependence on foreign oil, and the need for difficult choices between oil production and protection of biological systems. At the same time, the population is increasingly sedentary due largely to our reliance on the automobile for transportation. Adoption and maintenance of healthy weights and healthier lifestyles by substituting walking or biking for short trips currently taken by car could simultaneously improve health and reduce oil consumption and carbon dioxide emissions. We calculate the reduction in oil consumption and carbon dioxide emissions possible in the United States if (1) obese and overweight conditions were eliminated from the adult population through the use of walking or biking for transportation, and (2) individuals between the ages of 10 and 64 adopted previously recommended levels of daily exercise by walking or biking instead of driving. Substantial co-benefits accompany widespread adoption of physical activity. Assuming substitution of cycling for driving, the reduction in gasoline demand is equivalent to 34.9% of current domestic oil consumption. This constitutes considerably more oil than is recoverable from the Arctic National Wildlife Refuge. The concomitant reduction in US carbon dioxide emissions would constitute approximately 10.9% relative to 1990 net US emissions and would be a substantial step toward satisfying the Kyoto Protocol

  17. A healthy reduction in oil consumption and carbon emissions

    Energy Technology Data Exchange (ETDEWEB)

    Higgins, P.A.T. [Stanford Univ., CA (United States). Dept. of Biological Sciences; Higgins, M. [Michigan Univ., Ann Arbor, MI (United States). School of Public Health

    2005-01-01

    Reliance on oil as an energy source for private transportation produces increasingly unfavorable social, political and environmental conditions including climate change, dependence on foreign oil, and the need for difficult choices between oil production and protection of biological systems. At the same time, the population is increasingly sedentary due largely to our reliance on the automobile for transportation. Adoption and maintenance of healthy weights and healthier lifestyles by substituting walking or biking for short trips currently taken by car could simultaneously improve health and reduce oil consumption and carbon dioxide emissions. We calculate the reduction in oil consumption and carbon dioxide emissions possible in the United States if (1) obese and overweight conditions were eliminated from the adult population through the use of walking or biking for transportation, and (2) individuals between the ages of 10 and 64 adopted previously recommended levels of daily exercise by walking or biking instead of driving. Substantial co-benefits accompany widespread adoption of physical activity. Assuming substitution of cycling for driving, the reduction in gasoline demand is equivalent to 34.9% of current domestic oil consumption. This constitutes considerably more oil than is recoverable from the Arctic National Wildlife Refuge. The concomitant reduction in US carbon dioxide emissions would constitute approximately 10.9% relative to 1990 net US emissions and would be a substantial step toward satisfying the Kyoto Protocol. (author)

  18. Trading of locomotive NO(sub x) emissions : a potential success story

    International Nuclear Information System (INIS)

    Gaines, L. L.; Biess, L. J.; Diedrich, G. K.

    2002-01-01

    New US Environmental Protection Agency regulations are forcing locomotive manufacturers and railroads to reduce pollutant emissions from locomotive operation. All new locomotives must meet strict standards when they are built, and existing locomotives must comply when they are rebuilt. Emissions can be reduced either by adjusting combustion parameters, which incurs a fuel penalty, or by turning the diesel engine off when the train is not moving and would otherwise be idling. The latter reduces fuel consumption, but requires installation of a device-such as an auxiliary power unit (APU)-to ensure that the engine can be restarted in cold weather and to supply hotel loads for the crew. Without a financial incentive, capital-short railroads will opt to achieve compliance in the least costly way. However, if they have the option of selling emissions credits from reducing emissions below regulated levels, it would be in their best interest to install additional equipment to minimize emissions. These credits could be purchased by businesses with compliance costs greater than either the cost of the credits or the fines they would have had to pay for non-compliance. The result is a financial benefit for both parties, and a net reduction in emissions, because the seller is emitting below regulated levels, and the buyer is no longer non-compliant. This paper describes a railroad as the potential seller, unable to consummate trades because of uncertainty in the regulatory environment, and estimates financial benefits and reductions in emissions and energy use that could be achieved if the barrier could be removed

  19. Potential of Demand Side Management to Reduce Carbon Dioxide Emissions Associated with the Operation of Heat Pumps

    Directory of Open Access Journals (Sweden)

    Samuel J. G. Cooper

    2013-06-01

    Full Text Available This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050, the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

  20. Estimated emission reductions from California's enhanced Smog Check program.

    Science.gov (United States)

    Singer, Brett C; Wenzel, Thomas P

    2003-06-01

    The U.S. Environmental Protection Agency requires that states evaluate the effectiveness of their vehicle emissions inspection and maintenance (I/M) programs. This study demonstrates an evaluation approach that estimates mass emission reductions over time and includes the effect of I/M on vehicle deterioration. It includes a quantitative assessment of benefits from pre-inspection maintenance and repairs and accounts for the selection bias effect that occurs when intermittent high emitters are tested. We report estimates of one-cycle emission benefits of California's Enhanced Smog Check program, ca. 1999. Program benefits equivalent to metric tons per day of prevented emissions were calculated with a "bottom-up" approach that combined average per vehicle reductions in mass emission rates (g/gal) with average per vehicle activity, resolved by model year. Accelerated simulation mode test data from the statewide vehicle information database (VID) and from roadside Smog Check testing were used to determine 2-yr emission profiles of vehicles passing through Smog Check and infer emission profiles that would occur without Smog Check. The number of vehicles participating in Smog Check was also determined from the VID. We estimate that in 1999 Smog Check reduced tailpipe emissions of HC, CO, and NO(x) by 97, 1690, and 81 t/d, respectively. These correspond to 26, 34, and 14% of the HC, CO, and NO(x) that would have been emitted by vehicles in the absence of Smog Check. These estimates are highly sensitive to assumptions about vehicle deterioration in the absence of Smog Check. Considering the estimated uncertainty in these assumptions yields a range for calculated benefits: 46-128 t/d of HC, 860-2200 t/d of CO, and 60-91 t/d of NO(x). Repair of vehicles that failed an initial, official Smog Check appears to be the most important mechanism of emission reductions, but pre-inspection maintenance and repair also contributed substantially. Benefits from removal of nonpassing

  1. Net radiative forcing and air quality responses to regional CO emission reductions

    Directory of Open Access Journals (Sweden)

    M. M. Fry

    2013-05-01

    Full Text Available Carbon monoxide (CO emissions influence global and regional air quality and global climate change by affecting atmospheric oxidants and secondary species. We simulate the influence of halving anthropogenic CO emissions globally and individually from 10 regions on surface and tropospheric ozone, methane, and aerosol concentrations using a global chemical transport model (MOZART-4 for the year 2005. Net radiative forcing (RF is then estimated using the GFDL (Geophysical Fluid Dynamics Laboratory standalone radiative transfer model. We estimate that halving global CO emissions decreases global annual average concentrations of surface ozone by 0.45 ppbv, tropospheric methane by 73 ppbv, and global annual net RF by 36.1 mW m−2, nearly equal to the sum of changes from the 10 regional reductions. Global annual net RF per unit change in emissions and the 100 yr global warming potential (GWP100 are estimated as −0.124 mW m−2 (Tg CO−1 and 1.34, respectively, for the global CO reduction, and ranging from −0.115 to −0.131 mW m−2 (Tg CO−1 and 1.26 to 1.44 across 10 regions, with the greatest sensitivities for regions in the tropics. The net RF distributions show widespread cooling corresponding to the O3 and CH4 decreases, and localized positive and negative net RFs due to changes in aerosols. The strongest annual net RF impacts occur within the tropics (28° S–28° N followed by the northern midlatitudes (28° N–60° N, independent of reduction region, while the greatest changes in surface CO and ozone concentrations occur within the reduction region. Some regional reductions strongly influence the air quality in other regions, such as East Asia, which has an impact on US surface ozone that is 93% of that from North America. Changes in the transport of CO and downwind ozone production clearly exceed the direct export of ozone from each reduction region. The small variation in CO GWPs among world regions suggests that future international

  2. Potential for reducing global carbon emissions from electricity production-A bench marking analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ang, B.W.; Zhou, P.; Tay, L.P. [National University of Singapore (Singapore). Department of Industrial and Systems Engineering

    2011-05-15

    We present five performance indicators for electricity generation for 129 countries using the 2005 data. These indicators, measured at the national level, are the aggregate CO{sub 2} intensity of electricity production, the efficiencies of coal, oil and gas generation and the share of electricity produced from non-fossil fuels. We conduct a study on the potential for reducing global energy-related CO{sub 2} emissions from electricity production through simple bench marking. This is performed based on the last four performance indicators and the construction of a cumulative curve for each of these indicators. It is found that global CO{sub 2} emissions from electricity production would be reduced by 19% if all these indicators are benchmarked at the 50th percentile. Not surprisingly, the emission reduction potential measured in absolute terms is the highest for large countries such as China, India, Russia and the United States. When the potential is expressed as a percentage of a country's own emissions, few of these countries appear in the top-five list. 14 refs., 8 figs., 4 tabs.

  3. Papers of the Canadian Institute conference: Reduction, management and trading of greenhouse gas emissions

    International Nuclear Information System (INIS)

    2003-01-01

    This conference provided an opportunity for experts from various fields to discuss and exchange views and the latest information on a wide range of topics related to the reduction, management and trading of greenhouse gas emissions. The papers dealt with pertinent issues such as: (1) short and long term impacts of the Kyoto Protocol ratification for industries operating in Quebec, necessary changes and required investment, (2) calculation mechanisms for the allocation of permits, audit systems for the reduction and registration of emissions, (3) Canadian and international emission trading market, opportunities and associated risks, (4) preparation of an emission trading contract, (5) the establishment of a greenhouse gas (GHG) emission reduction and management system within companies, and (6) measures implemented by governments to assist industry in meeting emission reduction targets. Of the sixteen papers presented at the conference, 4 have been processed separately for inclusion in this database. refs., tabs., figs

  4. Effect of automatic control technologies on emission reduction in small-scale combustion

    Energy Technology Data Exchange (ETDEWEB)

    Ruusunen, M. [Control Engineering Laboratory, University of Oulu (Finland)

    2007-07-01

    Automatic control can be regarded as a primary measure for preventing combustion emissions. In this view, the control technology covers broadly the control methods, sensors and actuators for monitoring and controlling combustion. In addition to direct control of combustion process, it can also give tools for condition monitoring and optimisation of total heat consumption by system integration thus reducing the need for excess conversion of energy. Automatic control has already shown its potential in small-scale combustion. The potential, but still unrealised advantages of automatic control in this scale are the adaptation to changes in combustion conditions (fuel, environment, device, user) and the continuous optimisation of the air/fuel ratio. Modem control technology also covers combustion condition monitoring, diagnostics, and the higher level optimisation of the energy consumption with system integration. In theory, these primary measures maximise the overall efficiency, enabling a significant reduction in fuel consumption and thus total emissions per small-scale combustion unit, specifically at the annual level.

  5. Achieving emissions reduction through oil sands cogeneration in Alberta’s deregulated electricity market

    International Nuclear Information System (INIS)

    Ouellette, A.; Rowe, A.; Sopinka, A.; Wild, P.

    2014-01-01

    The province of Alberta faces the challenge of balancing its commitment to reduce CO 2 emissions and the growth of its energy-intensive oil sands industry. Currently, these operations rely on the Alberta electricity system and on-site generation to satisfy their steam and electricity requirements. Most of the on-site generation units produce steam and electricity through the process of cogeneration. It is unclear to what extent new and existing operations will continue to develop cogeneration units or rely on electricity from the Alberta grid to meet their energy requirements in the near future. This study explores the potential for reductions in fuel usage and CO 2 emissions by increasing the penetration of oil sands cogeneration in the provincial generation mixture. EnergyPLAN is used to perform scenario analyses on Alberta’s electricity system in 2030 with a focus on transmission conditions to the oil sands region. The results show that up to 15–24% of CO 2 reductions prescribed by the 2008 Alberta Climate Strategy are possible. Furthermore, the policy implications of these scenarios within a deregulated market are discussed. - Highlights: • High levels of cogeneration in the oil sands significantly reduce the total fuel usage and CO 2 emissions for the province. • Beyond a certain threshold, the emissions reduction intensity per MW of cogeneration installed is reduced. • The cost difference between scenarios is not significant. • Policy which gives an advantage to a particular technology goes against the ideology of a deregulated market. • Alberta will need significant improvements to its transmission system in order for oil sands cogeneration to persist

  6. Assessing “Dangerous Climate Change”: Required Reduction of Carbon Emissions to Protect Young People, Future Generations and Nature

    Science.gov (United States)

    Hansen, James; Kharecha, Pushker; Sato, Makiko; Masson-Delmotte, Valerie; Ackerman, Frank; Beerling, David J.; Hearty, Paul J.; Hoegh-Guldberg, Ove; Hsu, Shi-Ling; Parmesan, Camille; Rockstrom, Johan; Rohling, Eelco J.; Sachs, Jeffrey; Smith, Pete; Steffen, Konrad; Van Susteren, Lise; von Schuckmann, Karina; Zachos, James C.

    2013-01-01

    We assess climate impacts of global warming using ongoing observations and paleoclimate data. We use Earth’s measured energy imbalance, paleoclimate data, and simple representations of the global carbon cycle and temperature to define emission reductions needed to stabilize climate and avoid potentially disastrous impacts on today’s young people, future generations, and nature. A cumulative industrial-era limit of ∼500 GtC fossil fuel emissions and 100 GtC storage in the biosphere and soil would keep climate close to the Holocene range to which humanity and other species are adapted. Cumulative emissions of ∼1000 GtC, sometimes associated with 2°C global warming, would spur “slow” feedbacks and eventual warming of 3–4°C with disastrous consequences. Rapid emissions reduction is required to restore Earth’s energy balance and avoid ocean heat uptake that would practically guarantee irreversible effects. Continuation of high fossil fuel emissions, given current knowledge of the consequences, would be an act of extraordinary witting intergenerational injustice. Responsible policymaking requires a rising price on carbon emissions that would preclude emissions from most remaining coal and unconventional fossil fuels and phase down emissions from conventional fossil fuels. PMID:24312568

  7. Application research on big data in energy conservation and emission reduction of transportation industry

    Science.gov (United States)

    Bai, Bingdong; Chen, Jing; Wang, Mei; Yao, Jingjing

    2017-06-01

    In the context of big data age, the energy conservation and emission reduction of transportation is a natural big data industry. The planning, management, decision-making of energy conservation and emission reduction of transportation and other aspects should be supported by the analysis and forecasting of large amounts of data. Now, with the development of information technology, such as intelligent city, sensor road and so on, information collection technology in the direction of the Internet of things gradually become popular. The 3G/4G network transmission technology develop rapidly, and a large number of energy conservation and emission reduction of transportation data is growing into a series with different ways. The government not only should be able to make good use of big data to solve the problem of energy conservation and emission reduction of transportation, but also to explore and use a large amount of data behind the hidden value. Based on the analysis of the basic characteristics and application technology of energy conservation and emission reduction of transportation data, this paper carries out its application research in energy conservation and emission reduction of transportation industry, so as to provide theoretical basis and reference value for low carbon management.

  8. The application of CFD modelling to support the reduction of CO2 emissions in cement industry

    International Nuclear Information System (INIS)

    Mikulčić, Hrvoje; Vujanović, Milan; Fidaros, Dimitris K.; Priesching, Peter; Minić, Ivica; Tatschl, Reinhard; Duić, Neven; Stefanović, Gordana

    2012-01-01

    The cement industry is one of the leading producers of anthropogenic greenhouse gases, of which CO 2 is the most significant. Recently, researchers have invested a considerable amount of time studying ways to improve energy consumption and pollutant formation in the overall cement manufacturing process. One idea involves dividing the calcination and clinkering processes into two separate furnaces. The calcination process is performed in a calciner while the clinkering process takes place in a rotary kiln. As this is new technology in the cement manufacturing process, calciners are still in the research and development phase. The purpose of this paper is to demonstrate the potential of CFD to support the design and optimization of calciners, whose use appears to be essential in reduction of CO 2 emission during cement production. The mathematical model of the calcination process was developed, validated and implemented into a commercial CFD code, which was then used for the analysis. From the results obtained by these simulations, researchers will gain an in-depth understanding of all thermo-chemical reactions in a calciner. This understanding can be used to optimize the calciner's geometry, to make production more efficient, to lower pollutant formation and to subsequently reduce greenhouse gas emissions. -- Highlights: ► The potential of CO 2 emissions reduction, by using a cement calciner was presented. ► When a cement calciner is used, CO 2 emissions reduction of 3–4% can be achieved. ► The calcination model was developed, validated, and then used for the analysis. ► Shown method can be applied for investigation and optimization of cement calciners.

  9. National energy policies: Obstructing the reduction of global CO2 emissions? An analysis of Swedish energy policies for the district heating sector

    International Nuclear Information System (INIS)

    Difs, Kristina

    2010-01-01

    The effect of national energy policies on a local Swedish district heating (DH) system has been studied, regarding the profitability of new investments and the potential for climate change mitigation. The DH system has been optimised regarding three investments: biomass-fuelled CHP (bio CHP), natural gas-fuelled combined cycle CHP (NGCC CHP) and biomass-fuelled heat-only boiler (bio HOB) in two scenarios (with or without national taxes and policy instruments). In both scenarios EU's tradable CO 2 emission permits are included. Results from the study show that when national policies are included, the most cost-effective investment option is the bio CHP technology. However, when national taxes and policy instruments are excluded, the DH system containing the NGCC CHP plant has 30% lower system cost than the bio CHP system. Regardless of the scenario and when coal condensing is considered as marginal electricity production, the NGCC CHP has the largest global CO 2 reduction potential, about 300 ktonne CO 2 . However, the CO 2 reduction potential is highly dependent on the marginal electricity production. Demonstrated here is that national policies such as tradable green certificates can, when applied to DH systems, contribute to investments that will not fully utilise the DH systems' potential for global CO 2 emissions reductions. - Research highlights: →Swedish energy policies are promoting biomass fuelled electricity generating technologies over efficient fossil fuel electricity generating technologies. →An efficient fossil fuel technology like the natural gas combine cycle CHP technology with high power-to-heat ratio has potential to reduce the global CO 2 emissions more than a biomass fuelled electricity generating technology. →Swedish energy policies such as tradable green certificates for renewable electricity can, when applied to district heating systems, contribute to investments that will not fully utilise the district heating systems potential for

  10. The improvement of CO2 emission reduction policies based on system dynamics method in traditional industrial region with large CO2 emission

    International Nuclear Information System (INIS)

    Li, Fujia; Dong, Suocheng; Li, Zehong; Li, Yu; Li, Shantong; Wan, Yongkun

    2012-01-01

    Some traditional industrial regions are characterized by high industrial proportion and large CO 2 emission. They are facing dual pressures of maintaining economic growth and largely reducing CO 2 emission. From the perspective of study of typological region, taking the typical traditional industrial region—Liaoning Province of China as a case, this study establishes a system dynamics model named EECP and dynamically simulates CO 2 emission trends under different conditions. Simulation results indicate, compared to the condition without CO 2 emission reduction policies, CO 2 emission intensity under the condition of implementing CO 2 emission reduction policies of “Twelfth Five-Year Plan” is decreased by 11% from 2009 to 2030, but the economic cost is high, making the policies implementation faces resistance. Then some improved policies are offered and proved by EECP model that they can reduce CO 2 emission intensity after 2021 and decrease the negative influence to GDP, realizing the improvement objects of reducing CO 2 emission and simultaneously keeping a higher economy growth speed. The improved policies can provide reference for making and improving CO 2 emission reduction policies in other traditional industrial regions with large CO 2 emission. Simultaneously, EECP model can provide decision-makers with reference and help for similar study of energy policy. - Highlights: ► We build EECP model for CO 2 emission reduction study in traditional industry region. ► By the model, we simulate CO 2 emission trend and improve emission reduction policy. ► By improvement, both CO 2 emission intensity and economic cost can be largely reduced. ► Besides CO 2 emission is reduced effectively, higher GDP increment speed is kept. ► EECP model can be widely used for making and improving regional energy policies.

  11. Reduced emissions of greenhouse gases 2050: Technological wedges - Input to the Commission on Low Emissions

    International Nuclear Information System (INIS)

    Rosenberg, Eva; Espegren, Kari Aamodt; Finden, Per; Hageman, Rolf; Stenersen, Dag

    2006-09-01

    The Commission on Low Emissions was established in March 2005 and has been charged with the task of describing how Norway can achieve a 50-80 percent reduction in emissions of greenhouse gases by 2050. The commission describes the desired total reduction in emissions to be a set of actions or 'wedges', meaning that the reduction in emissions are linked to an array of technological and behavioural changes. The technological wedges are described here, while the behavioural wedges are treated in a different report. The potentials described are based on the Low Emission's reference line. Possible changes in the reference line will result in changed potentials. The technological wedges studied comprise to a great extent a potential of 50-80 percent reduction in greenhouse gases by 2050. This depends on considerable effort from research and development, and a determination to change external conditions

  12. Olympic Games promote the reduction in emissions of greenhouse gases in Beijing

    International Nuclear Information System (INIS)

    Wu Jisong; Zhang Yongjie

    2008-01-01

    Global climate change is one of the most serious global environmental problems faced by humankind at present. Serious attention should be paid and precautions should be taken before disasters occur. The amount of CO 2 emissions in China has increased during the past few years and the Chinese government and people have attached great importance to this phenomenon and treated it seriously. With the instruction of scientific development viewpoint, Beijing has made significant progress in emissions reduction through technological innovation, industrial structure adjustment, promoting energy efficiency and utilization of renewable energy, and absorption of CO 2 using forest and wetland, since bidding for Olympic Games. At the same time, energy conservation and emissions reduction measures taken in the construction of Beijing Olympic stadiums just incarnate the Beijing Green Olympics. Using the Beijing Olympic Games as a turning-point, adopting energy conservation and emissions reduction measures, Beijing will make contributions to reduction of greenhouse gases and slowing down climate changes and Beijing Olympic Games will leave behind an inheritance for future generations to enjoy

  13. Olympic Games promote the reduction in emissions of greenhouse gases in Beijing

    Energy Technology Data Exchange (ETDEWEB)

    Wu Jisong [China Centre of Recycle Economy Research, School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)], E-mail: js_wub@buaa.edu.cn; Zhang Yongjie [China Centre of Recycle Economy Research, School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)

    2008-09-15

    Global climate change is one of the most serious global environmental problems faced by humankind at present. Serious attention should be paid and precautions should be taken before disasters occur. The amount of CO{sub 2} emissions in China has increased during the past few years and the Chinese government and people have attached great importance to this phenomenon and treated it seriously. With the instruction of scientific development viewpoint, Beijing has made significant progress in emissions reduction through technological innovation, industrial structure adjustment, promoting energy efficiency and utilization of renewable energy, and absorption of CO{sub 2} using forest and wetland, since bidding for Olympic Games. At the same time, energy conservation and emissions reduction measures taken in the construction of Beijing Olympic stadiums just incarnate the Beijing Green Olympics. Using the Beijing Olympic Games as a turning-point, adopting energy conservation and emissions reduction measures, Beijing will make contributions to reduction of greenhouse gases and slowing down climate changes and Beijing Olympic Games will leave behind an inheritance for future generations to enjoy.

  14. Olympic Games promote the reduction in emissions of greenhouse gases in Beijing

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Jisong; Zhang, Yongjie [China Centre of Recycle Economy Research, School of Economics and Management, Beijing University of Aeronautics and Astronautics, Beijing 100083 (China)

    2008-09-15

    Global climate change is one of the most serious global environmental problems faced by humankind at present. Serious attention should be paid and precautions should be taken before disasters occur. The amount of CO{sub 2} emissions in China has increased during the past few years and the Chinese government and people have attached great importance to this phenomenon and treated it seriously. With the instruction of scientific development viewpoint, Beijing has made significant progress in emissions reduction through technological innovation, industrial structure adjustment, promoting energy efficiency and utilization of renewable energy, and absorption of CO{sub 2} using forest and wetland, since bidding for Olympic Games. At the same time, energy conservation and emissions reduction measures taken in the construction of Beijing Olympic stadiums just incarnate the Beijing Green Olympics. Using the Beijing Olympic Games as a turning-point, adopting energy conservation and emissions reduction measures, Beijing will make contributions to reduction of greenhouse gases and slowing down climate changes and Beijing Olympic Games will leave behind an inheritance for future generations to enjoy. (author)

  15. Developments in greenhouse gas emissions and net energy use in Danish agriculture - How to achieve substantial CO2 reductions?

    International Nuclear Information System (INIS)

    Dalgaard, T.; Olesen, J.E.; Petersen, S.O.; Petersen, B.M.; Jorgensen, U.; Kristensen, T.; Hutchings, N.J.; Gyldenkaerne, S.; Hermansen, J.E.

    2011-01-01

    Greenhouse gas (GHG) emissions from agriculture are a significant contributor to total Danish emissions. Consequently, much effort is currently given to the exploration of potential strategies to reduce agricultural emissions. This paper presents results from a study estimating agricultural GHG emissions in the form of methane, nitrous oxide and carbon dioxide (including carbon sources and sinks, and the impact of energy consumption/bioenergy production) from Danish agriculture in the years 1990-2010. An analysis of possible measures to reduce the GHG emissions indicated that a 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable, including mitigation measures in relation to the handling of manure and fertilisers, optimization of animal feeding, cropping practices, and land use changes with more organic farming, afforestation and energy crops. In addition, the bioenergy production may be increased significantly without reducing the food production, whereby Danish agriculture could achieve a positive energy balance. - Highlights: → GHG emissions from Danish agriculture 1990-2010 are calculated, including carbon sequestration. → Effects of measures to further reduce GHG emissions are listed. → Land use scenarios for a substantially reduced GHG emission by 2050 are presented. → A 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable. → Via bioenergy production Danish agriculture could achieve a positive energy balance. - Scenario studies of greenhouse gas mitigation measures illustrate the possible realization of CO 2 reductions for Danish agriculture by 2050, sustaining current food production.

  16. Opportunities and criticisms of voluntary emission reduction projects developed by Public Administrations: Analysis of 143 case studies implemented in Italy

    International Nuclear Information System (INIS)

    Gallo, Michela; Del Borghi, Adriana; Strazza, Carlo; Parodi, Lara; Arcioni, Livia; Proietti, Stefania

    2016-01-01

    Highlights: • 143 voluntary emission reduction projects have been analysed. • The projects belong to renewable energy, energy efficiency and transport sectors. • Voluntary emission reduction standards and methodologies have been applied. • The paper identified the main criticisms for each sector. • Energy efficiency projects are the most promising for public entities. - Abstract: The United Nations Framework Convention on Climate Change (UNFCCC) sets an overall framework for intergovernmental efforts to tackle the challenge posed by climate change. Besides the “flexibility mechanisms” defined by the Kyoto Protocol to lower the overall costs of achieving their emissions targets, The Voluntary Green House Gases (GHG) reduction projects can have a lead role in GHG reduction in “non Emissions Trading System ETS sectors”. Nowadays, the voluntary market is characterised by critical aspects, such as fragmentation, lack of accounting, monitoring and validation rules that have led to the low spread of voluntary emission reduction projects developed by local authorities in the European Union despite their high potentiality. The aim of this paper is to test the applicability of voluntary emission reduction projects in the public sector following a homogeneous and consistent pattern. A research has been performed at local level on 143 voluntary emission reduction projects implemented by Public Administrations in Northern and Central Italy in renewable energy, energy efficiency and transport sectors. The applicable standards and methodologies have been checked and the case studies have been analysed though a three-step process: Preliminary additionality assessment; Projects selection; Validation of the selected project. The assessment shows that energy efficiency projects, once overcoming additionality issues, are the most promising for public entities while renewable energy and transport projects resulted to be mainly affected by double counting problems and

  17. Reduction of carbon dioxide emissions by solar water heating systems and passive technologies in social housing

    International Nuclear Information System (INIS)

    Bessa, Vanessa M.T.; Prado, Racine T.A.

    2015-01-01

    Growing global concern regarding climate change motivates technological studies to minimize environmental impacts. In this context, solar water heating (SWH) systems are notably prominent in Brazil, primarily because of the abundance of solar energy in the country. However, SWH designs have not always been perfectly developed. In most projects, the installation option of the solar system only considers the electric power economy aspects and not the particular characteristics of each climatic zone. Thus, the primary objective of this paper is to assess the potential of carbon dioxide reduction with the use of SWH in comparison with electric showers in social housing in several Brazilian climatic zones. The Brazilian government authorities have created public policies to encourage the use of these technologies primarily among the low-income population. The results of this paper indicate that hot climactic regions demonstrate a low reduction of CO 2 emissions with SWH installations. Thus, solar radiation is not useful for water heating in those regions, but it does lead to a large fraction of household cooling loads, implying a demand for electrical energy for air conditioning or requiring the adoption of passive techniques to maintain indoor temperatures below threshold values. -- Graphical abstract: Display Omitted -- Highlights: •Brazil has created public policies to increase the use of solar water heating in social housing. •We have evaluated the potential for reduction of CO 2 emissions installing solar water heating. •We have found that the coldest regions have the greatest potential for reducing emissions. •Passive technologies for thermal comfort in hot climate households are more useful than solar water heating systems

  18. Experimental assessment of the potential to decrease diesel NOx emissions beyond minimum requirements for Euro 6 Real Drive Emissions (RDE) compliance.

    Science.gov (United States)

    Triantafyllopoulos, Georgios; Katsaounis, Dimitrios; Karamitros, Dimitrios; Ntziachristos, Leonidas; Samaras, Zissis

    2018-03-15

    The objective of this study was to test the potential for NO x emissions improvements on a typical Euro 6 diesel vehicle, following modifications to its emissions control system, under Real Drive Emissions (RDE) testing conditions. A commercially available car was selected and was first measured in its original configuration according to RDE on the road and an initial conformity factor (CF) of 5.4 was determined. Subsequent engine calibration and installation of a Selective Catalytic Reduction (SCR) device were conducted and tested on a fully transient engine dyno setup, which precisely reproduced the engine operation under the on-road RDE test. The NO x reduction achieved with those upgrades was 90%, leading to a CF of 0.53, with no CO 2 or fuel consumption penalty. These findings demonstrate that diesel vehicles can reach low NO x levels under real world driving conditions, when well-designed modern exhaust aftertreatment components are installed and properly calibrated. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Post2012 climate regime options for global GHG emission reduction. Analysis and evaluation of regime options and reduction potential for achieving the 2 degree target with respect to environmental effectiveness, costs and institutional aspects

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, Katja; Graichen, Jakob; Healy, Sean [Oeko-Institut, Inst. fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany); Schleich, Joachim; Duscha, Vicki [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany)

    2011-08-15

    This report explores the environmental and economic effects of the pledges submitted by industrialized and major developing countries for 2020 under the Copenhagen Accord and provides an in-depth comparison with results arrived at in other model analyses. Two scenarios reflect the lower (''weak'') and upper (''ambitious'') bounds of the Copenhagen pledges. In addition, two scenarios in accordance with the IPCC range for reaching a 2 C target are analyzed with industrialized countries in aggregate reducing their CO2 emissions by 30 % in 2020 compared to 1990 levels. For all four policy scenarios the effects of emission paths leading to a global reduction target of 50 % below 1990 levels in 2050 are also simulated for 2030. In addition, a separate scenario is carried out which estimates the costs of an unconditioned EU 30 % emission reduction target, i.e. where the EU adopts a 30 % emission reduction target in 2020 (rather than a 20 % reduction target), while all other countries stick with their ''weak'' pledges. Not included in the calculations is possible financial support for developing countries from industrialized countries as currently discussed in the climate change negotiations and laid out in the Copenhagen Accord. (orig.)

  20. Potential and cost of clean development mechanism options in the energy sector. Inventory of options in non-Annex I countries to reduce GHG-emissions

    Energy Technology Data Exchange (ETDEWEB)

    Jansen, J.C.; Van der Linden, N.H.; Martens, J.W.; Ormel, F.; Van Rooijen, S.N.M. [ECN Policy Studies, Petten (Netherlands); Heaps, C.; Kartha, S.; Lazarus, M.; Ruth, M. [Stockholm Environment Institute SEI, Boston (United States); Lee, R.; Mendis, M. [Alternative Energy Development, Inc., Silver Spring (United States)

    1999-12-01

    An assessment is presented of the potential and cost of the Clean Development Mechanism as an instrument to partially meet the Greenhouse Gases emission limitation commitments of the Netherlands for the first budget period, 2008-2012. Information about the cost and emission reduction potential in the energy sector has been collected from national mitigation studies. In total, some 300 GHG emission reduction options in 24 non-Annex I countries have been collected Together, these countries account for two-thirds of current non-Annex I GHG emissions. The mitigation potential in non-Annex I countries is significant when compared with Annex I reduction requirements. The inventory of mitigation options suggests that an annual mitigation potential in the first budget period at costs up to 1990 USD 10/ton CO2 is approximately 1.7 Gt CO2 equivalents. However, this estimate should be viewed with caution, as the mitigation studies on which this estimate is based have been carried out as capacity-building exercises and they should not be viewed as definitive, technically rigorous, exhaustive, analysis of national GHG mitigation potential. 15 refs.

  1. Using learning curves on energy-efficient technologies to estimate future energy savings and emission reduction potentials in the U.S. iron and steel industry

    Energy Technology Data Exchange (ETDEWEB)

    Karali, Nihan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Park, Won Young [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); McNeil, Michael A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-06-18

    Increasing concerns on non-sustainable energy use and climate change spur a growing research interest in energy efficiency potentials in various critical areas such as industrial production. This paper focuses on learning curve aspects of energy efficiency measures in the U.S iron and steel sector. A number of early-stage efficient technologies (i.e., emerging or demonstration technologies) are technically feasible and have the potential to make a significant contribution to energy saving and CO2 emissions reduction, but fall short economically to be included. However, they may also have the cost effective potential for significant cost reduction and/or performance improvement in the future under learning effects such as ‘learning-by-doing’. The investigation is carried out using ISEEM, a technology oriented, linear optimization model. We investigated how steel demand is balanced with/without the availability learning curve, compared to a Reference scenario. The retrofit (or investment in some cases) costs of energy efficient technologies decline in the scenario where learning curve is applied. The analysis also addresses market penetration of energy efficient technologies, energy saving, and CO2 emissions in the U.S. iron and steel sector with/without learning impact. Accordingly, the study helps those who use energy models better manage the price barriers preventing unrealistic diffusion of energy-efficiency technologies, better understand the market and learning system involved, predict future achievable learning rates more accurately, and project future savings via energy-efficiency technologies with presence of learning. We conclude from our analysis that, most of the existing energy efficiency technologies that are currently used in the U.S. iron and steel sector are cost effective. Penetration levels increases through the years, even though there is no price reduction. However, demonstration technologies are not economically

  2. SPATIAL DISTRIBUTIONS OF ABSORPTION, LOCAL SUPPRESSION, AND EMISSIVITY REDUCTION OF SOLAR ACOUSTIC WAVES IN MAGNETIC REGIONS

    International Nuclear Information System (INIS)

    Chou, D.-Y.; Yang, M.-H.; Zhao Hui; Liang Zhichao; Sun, M.-T.

    2009-01-01

    Observed acoustic power in magnetic regions is lower than the quiet Sun because of absorption, emissivity reduction, and local suppression of solar acoustic waves in magnetic regions. In the previous studies, we have developed a method to measure the coefficients of absorption, emissivity reduction, and local suppression of sunspots. In this study, we go one step further to measure the spatial distributions of three coefficients in two active regions, NOAA 9055 and 9057. The maps of absorption, emissivity reduction, and local suppression coefficients correlate with the magnetic map, including plage regions, except the emissivity reduction coefficient of NOAA 9055 where the emissivity reduction coefficient is too weak and lost among the noise.

  3. The impacts of electricity dispatch protocols on the emission reductions due to wind power and carbon tax.

    Science.gov (United States)

    Yu, Yang; Rajagopal, Ram

    2015-02-17

    Two dispatch protocols have been adopted by electricity markets to deal with the uncertainty of wind power but the effects of the selection between the dispatch protocols have not been comprehensively analyzed. We establish a framework to compare the impacts of adopting different dispatch protocols on the efficacy of using wind power and implementing a carbon tax to reduce emissions. We suggest that a market has high potential to achieve greater emission reduction by adopting the stochastic dispatch protocol instead of the static protocol when the wind energy in the market is highly uncertain or the market has enough adjustable generators, such as gas-fired combustion generators. Furthermore, the carbon-tax policy is more cost-efficient for reducing CO2 emission when the market operates according to the stochastic protocol rather than the static protocol. An empirical study, which is calibrated according to the data from the Electric Reliability Council of Texas market, confirms that using wind energy in the Texas market results in a 12% CO2 emission reduction when the market uses the stochastic dispatch protocol instead of the 8% emission reduction associated with the static protocol. In addition, if a 6$/ton carbon tax is implemented in the Texas market operated according to the stochastic protocol, the CO2 emission is similar to the emission level from the same market with a 16$/ton carbon tax operated according to the static protocol. Correspondingly, the 16$/ton carbon tax associated with the static protocol costs 42.6% more than the 6$/ton carbon tax associated with the stochastic protocol.

  4. CO_2 emissions and energy intensity reduction allocation over provincial industrial sectors in China

    International Nuclear Information System (INIS)

    Wu, Jie; Zhu, Qingyuan; Liang, Liang

    2016-01-01

    Highlights: • DEA is used to evaluate the energy and environmental efficiency of 30 provincial industrial sector in China. • A new DEA-based model is proposed to allocate the CO_2 emissions and energy intensity reduction targets. • The context-dependent DEA is used to characterize the production plans. - Abstract: High energy consumption by the industry of developing countries has led to the problems of increasing emission of greenhouse gases (GHG) (primarily CO_2) and worsening energy shortages. To address these problems, many mitigation measures have been utilized. One major measure is to mandate fixed reductions of GHG emission and energy consumption. Therefore, it is important for each developing country to disaggregate their national reduction targets into targets for various geographical parts of the country. In this paper, we propose a DEA-based approach to allocate China’s national CO_2 emissions and energy intensity reduction targets over Chinese provincial industrial sectors. We firstly evaluate the energy and environmental efficiency of Chinese industry considering energy consumption and GHG emissions. Then, considering the necessity of mitigating GHG emission and energy consumption, we develop a context-dependent DEA technique which can better characterize the changeable production with reductions of CO_2 emission and energy intensity, to help allocate the national reduction targets over provincial industrial sectors. Our empirical study of 30 Chinese regions for the period 2005–2010 shows that the industry of China had poor energy and environmental efficiency. Considering three major geographical areas, eastern China’s industrial sector had the highest efficiency scores while in this aspect central and western China were similar to each other at a lower level. Our study shows that the most effective allocation of the national reduction target requires most of the 30 regional industrial to reduce CO_2 emission and energy intensity, while a

  5. A new model for calculating the reduction in greenhouse gas emissions through anaerobic co-digestion of manure and organic waste

    International Nuclear Information System (INIS)

    Sommer, S.G.; Moeller, H.B.; Petersen, S.O.

    2002-01-01

    Biogenic emissions of methane (CH 4 ) and nitrous oxide (N 2 0) occur during handling, storage and after field application of animal manure. The emissions are linked to decomposition of volatile solids (VS), which provide energy for microorganisms. During anaerobic storage, turnover of VS drives the microbial processes which lead to CH 4 , production. Also, turnover of VS in slurry applied to fields will consume oxygen and can thereby stimulate N 2 0 production. Anaerobic digestion of manure and organic wastes for biogas production removes VS prior to storage and field application, and therefore this treatment also reduces the potential for CH 4 , and N 2 0 emissions. A model has been developed to evaluate the effect of anaerobic co-digestion of animal manure and organic waste on CH, and N 2 0 emissions. The model estimates the reduction in VS during storage and digestion, and an algorithm for prediction of CH 4 , emissions from manure during storage relates the emission to VS, temperature and storage time. Nitrous oxide emissions from field-applied slurry are calculated using VS, slurry N, soil water potential and application method as input variables, thus linking C and N turnover. The amount of fossil fuel that is substituted by CH 4 , produced during digestion is also calculated in order to estimate the total effect of anaerobic digestion on greenhouse gas emissions from slurry. Model calculations show the potential of manure digestion to modify the emission of greenhouse gases from agriculture. The experience from application of the model to different scenarios is that the emission of greenhouse gases and their reduction must be calculated with dynamic and integrated models. Specifically, the results indicate that digestion of slurry and organic wastes could reduce Danish greenhouse gas emissions by as much as 3%. (au)

  6. Reduce NOx Emissions by Adsorber-Reduction Catalyst on Lean Burn Gasoline Engine

    Directory of Open Access Journals (Sweden)

    Dongpeng Yue

    2013-09-01

    Full Text Available The effect of a new catalyst system composed of traditional three way catalyst converter and adsorber-reduction catalysis converter on the emission characteristics and BSFC (Breake Specific Fuel Consumption- BSFCof a lean burn gasoline engine operated were investigated in this paper under different schemes of catalyst converter arrangement and different speeds and loads. The results show that the position of Three Way Catalyst is before the NOx adsorber Catalyst was the best scheme of catalyst converter arrangement. Which has the highest converter efficiency of reduction NOx emission in lean burn gasoline engine. The effects of speed on the exhaust emission and BSFC were also related to the ratio of lean burn time to rich burn time and the absolute value of both time of the adsorber-reduction catalyst converter. The load of the engine was the main influential factor to the exhaust emission characteristics and BSFC of lean burn gasoline engine, and the more load of the engine was, the more NOx emission , the less NOx conversion rate (CNOx and the better BSFC were.

  7. Potentials of NO{sub X} emission reduction methods in SI hydrogen engines: Simulation study

    Energy Technology Data Exchange (ETDEWEB)

    Safari, H.; Jazayeri, S.A. [Department of Mechanical Engineering, K.N. Toosi University of Technology, No.15, Pardis Street, Vanak Square, Tehran (Iran); Ebrahimi, R. [Department of Aerospace Engineering, K.N. Toosi University of Technology, 4th Tehranpars Square, East Vafadar Street, Tehran (Iran)

    2009-01-15

    The ever increasing cost of hydrocarbon fuels and more stringent emission standards may resolve challenges in producing hydrogen and using it as an alternative fuel in industries. Internal combustion engines are well-established technology and hydrogen fuel in such engines is considered as an attractive choice in exploiting clean, efficient and renewable hydrogen energy. This work presents an improved thermo-kinetics model for simulation of hydrogen combustion in SI engines. The turbulent propagating flame is modeled using turbulent burning velocity model. During combustion the charge is divided into three zones containing unburned charge, flame and burned gas. The adiabatic flame is assumed to be in thermodynamic equilibrium while the detailed chemical kinetics scheme is considered for burned and unburned zones. The results were first validated against published experiments. Good agreements were obtained between simulation and experiment for varying equivalence ratio, ignition timing and compression ratio. Detailed analysis of engine NO{sub X} emission was performed afterward. The lean-burn and EGR strategies' potentials were examined by the current model. The effects of different amounts of cooled dry EGR and hot wet EGR on the NO{sub X} emission, engine power output and indicated thermal efficiency were investigated and compared theoretically. (author)

  8. Potential biodiversity benefits from international programs to reduce carbon emissions from deforestation.

    Science.gov (United States)

    Siikamäki, Juha; Newbold, Stephen C

    2012-01-01

    Deforestation is the second largest anthropogenic source of carbon dioxide emissions and options for its reduction are integral to climate policy. In addition to providing potentially low cost and near-term options for reducing global carbon emissions, reducing deforestation also could support biodiversity conservation. However, current understanding of the potential benefits to biodiversity from forest carbon offset programs is limited. We compile spatial data on global forest carbon, biodiversity, deforestation rates, and the opportunity cost of land to examine biodiversity conservation benefits from an international program to reduce carbon emissions from deforestation. Our results indicate limited geographic overlap between the least-cost areas for retaining forest carbon and protecting biodiversity. Therefore, carbon-focused policies will likely generate substantially lower benefits to biodiversity than a more biodiversity-focused policy could achieve. These results highlight the need to systematically consider co-benefits, such as biodiversity in the design and implementation of forest conservation programs to support international climate policy.

  9. Comparison of Gasoline Direct-Injection (GDI) and Port Fuel Injection (PFI) Vehicle Emissions: Emission Certification Standards, Cold-Start, Secondary Organic Aerosol Formation Potential, and Potential Climate Impacts.

    Science.gov (United States)

    Saliba, Georges; Saleh, Rawad; Zhao, Yunliang; Presto, Albert A; Lambe, Andrew T; Frodin, Bruce; Sardar, Satya; Maldonado, Hector; Maddox, Christine; May, Andrew A; Drozd, Greg T; Goldstein, Allen H; Russell, Lynn M; Hagen, Fabian; Robinson, Allen L

    2017-06-06

    the potential climate forcing associated with higher black carbon emissions. Thus, switching from PFI to GDI vehicles will likely lead to a reduction in net global warming.

  10. CO2 Emission Reduction in Energy Sector

    International Nuclear Information System (INIS)

    Bole, A.; Sustersic, A.; Voncina, R.

    2013-01-01

    Due to human activities, concentrations of the greenhouse gases increase in the atmosphere much quicker than they naturally would. Today it is clear that climate change is the result of human activities. With the purpose of preventing, reducing and mitigating of climate change, the EU, whose member is also Slovenia, set ambitious goals. In order to keep rise of the global atmosphere temperature below 2 degrees of C, the European Council set an objective of reducing greenhouse gas emissions by 80 - 95 % by 2050 compared to 1990. It is important that every single individual is included in achieving of these goals. Certainly, the most important role is assumed by individual sectors especially Public Electricity and Heat Production sector as one of the greatest emitters of the greenhouse gases. As a possible solution of radical reduction of the greenhouse gases emission from mentioned sector Carbon Capture and Storage (CCS) technology is implemented. In the article the range of CO 2 reduction possibilities, technology demands and environmental side effects of CCS technology are described. Evaluation of CCS implementation possibilities in Slovenia is also included.(author)

  11. Ozone response to emission reductions in the southeastern United States

    Science.gov (United States)

    Blanchard, Charles L.; Hidy, George M.

    2018-06-01

    Ozone (O3) formation in the southeastern US is studied in relation to nitrogen oxide (NOx) emissions using long-term (1990s-2015) surface measurements of the Southeastern Aerosol Research and Characterization (SEARCH) network, U.S. Environmental Protection Agency (EPA) O3 measurements, and EPA Clean Air Status and Trends Network (CASTNET) nitrate deposition data. Annual fourth-highest daily peak 8 h O3 mixing ratios at EPA monitoring sites in Georgia, Alabama, and Mississippi exhibit statistically significant (p total oxidized nitrogen (NOy) mixing ratios at SEARCH sites declined in proportion to NOx emission reductions. CASTNET data show declining wet and dry nitrate deposition since the late 1990s, with total (wet plus dry) nitrate deposition fluxes decreasing linearly in proportion to reductions of NOx emissions by ˜ 60 % in Alabama and Georgia. Annual nitrate deposition rates at Georgia and Alabama CASTNET sites correspond to 30 % of Georgia emission rates and 36 % of Alabama emission rates, respectively. The fraction of NOx emissions lost to deposition has not changed. SEARCH and CASTNET sites exhibit downward trends in mean annual nitric acid (HNO3) concentrations. Observed relationships of O3 to NOz (NOy-NOx) support past model predictions of increases in cycling of NO and increasing responsiveness of O3 to NOx. The study data provide a long-term record that can be used to examine the accuracy of process relationships embedded in modeling efforts. Quantifying observed O3 trends and relating them to reductions in ambient NOy species concentrations offers key insights into processes of general relevance to air quality management and provides important information supporting strategies for reducing O3 mixing ratios.

  12. Differences in regional emissions in China's transport sector: Determinants and reduction strategies

    International Nuclear Information System (INIS)

    Xu, Bin; Lin, Boqiang

    2016-01-01

    With recent surge in the number of vehicles, particularly private vehicles, the transport sector has significantly contributed to the increase in energy consumption and carbon dioxide emissions in China. Most of the existing researches utilized time series data to investigate the factors influencing transport sector's carbon dioxide emission at the national level while neglecting the level of regional differences. This paper adopts provincial panel data from 2000 to 2012 and panel data models to examine the key driving forces of carbon dioxide emissions in the transport sector at the regional level in China. The estimation results show that the impacts of urbanization on carbon dioxide emissions in the transport sector vary across regions and decline continuously from the western region to the eastern and central regions. Private vehicles are more important than cargo turnover in emission reduction because of its relatively inefficient and excessive growth. The role of energy efficiency improvement in mitigating carbon dioxide emissions in the three regions varies due to significant differences in research and development investment and management efficiency. Hence, in order to effectively achieve emission reduction, local governments should consider all these factors as well as regional heterogeneity in developing appropriate mitigation policies. - Highlights: • The factors of carbon dioxide emissions in China's transport sector were explored. • The impact of urbanization on carbon dioxide emissions varies across regions. • Private vehicles are more critical than cargo turnover in emission reduction. • The role of energy efficiency in the three regions is exactly the opposite.

  13. Climate protection and energy crops. Potential for greenhouse gas emission reduction through crop rotation and crop planning

    International Nuclear Information System (INIS)

    Eckner, Jens; Peter, Christiane; Vetter, Armin

    2015-01-01

    The EVA project compares nationwide energy crops and crop rotations on site-specific productivity. In addition to agronomic suitability for cultivation economic and environmental benefits and consequences are analyzed and evaluated. As part of sustainability assessment of the tested cultivation options LCAs are established. The model MiLA developed in the project uses empirical test data and site parameters to prepare the inventory balances. At selected locations different cultivation and fertilization regimes are examined comparatively. In the comparison of individual crops and crop rotation combinations cultivation of W.Triticale-GPS at the cereals favor location Dornburg causes the lowest productrelated GHG-emissions. Due to the efficient implementation of nitrogen and the substrate properties of maize is the cultivation despite high area-related emissions and N-expenses at a low level of emissions. Because of the intensity the two culture systems offer lower emissions savings potentials with high area efficiency. Extensification with perennial alfalfagrass at low nitrogen effort and adequate yield performance show low product-related emissions. Closing the nutrient cycles through a recirculation of digestates instead of using mineral fertilization has a climate-friendly effect. Adapted intensifies of processing or reduced tillage decrease diesel consumption and their related emissions.

  14. Impacts of potential CO2-reduction policies on air quality in the United States.

    Science.gov (United States)

    Trail, Marcus A; Tsimpidi, Alexandra P; Liu, Peng; Tsigaridis, Kostas; Hu, Yongtao; Rudokas, Jason R; Miller, Paul J; Nenes, Athanasios; Russell, Armistead G

    2015-04-21

    Impacts of emissions changes from four potential U.S. CO2 emission reduction policies on 2050 air quality are analyzed using the community multiscale air quality model (CMAQ). Future meteorology was downscaled from the Goddard Institute for Space Studies (GISS) ModelE General Circulation Model (GCM) to the regional scale using the Weather Research Forecasting (WRF) model. We use emissions growth factors from the EPAUS9r MARKAL model to project emissions inventories for two climate tax scenarios, a combined transportation and energy scenario, a biomass energy scenario and a reference case. Implementation of a relatively aggressive carbon tax leads to improved PM2.5 air quality compared to the reference case as incentives increase for facilities to install flue-gas desulfurization (FGD) and carbon capture and sequestration (CCS) technologies. However, less capital is available to install NOX reduction technologies, resulting in an O3 increase. A policy aimed at reducing CO2 from the transportation sector and electricity production sectors leads to reduced emissions of mobile source NOX, thus reducing O3. Over most of the U.S., this scenario leads to reduced PM2.5 concentrations. However, increased primary PM2.5 emissions associated with fuel switching in the residential and industrial sectors leads to increased organic matter (OM) and PM2.5 in some cities.

  15. Lean-burn engines UHC emission reduction

    Energy Technology Data Exchange (ETDEWEB)

    Karll, B.; Kristensen, P.G.; Nielsen, M.; Iskov, H. [Danish Gas Technology Centre a/s (Denmark); Broe Bendtsen, A.; Glarborg, P.; Dam-Johansen, K. [Technical University of Denmark. CHEC, Department of Chemical Engineering (Denmark)

    1999-04-01

    The effect of adding hydrogen to methane as a fuel for spark ignited engines has been extensively investigated. Both the possibility of adding a limited amount of hydrogen as well as equal amounts of hydrogen and carbon dioxide to natural gas has been investigated. A 10 vol% addition of hydrogen to the natural gas caused a reduction in UHC of approximately 40%, and an increase in efficiency of approximately three percentage points at the test engine. It is unknown if the gain is representative for large engines. Similar results for UHC reduction and efficiency were obtained for combined hydrogen and carbon dioxide addition. The carbon dioxide was added by exhaust gas recirculation. However, the price of hydrogen, makes this idea uneconomical even when carbon dioxide is readily available through recirculation of engine exhaust. Adiabatic prereforming may be used to convert natural gas into methane, hydrogen and carbon dioxide in order to generate hydrogen and at the same time increase the methane number. The process has been found to be competitive with adding of hydrogen but it is still not economical. The effect of NO/NO{sub 2} on methane oxidation has been studied both theoretically and experimentally. A detailed kinetic modelling study of the UHC conversion dependency of exhaust gas parameters is reported and the project has contributed to the theoretical understanding of the oxidation chemistry. Both NO and NH{sub 3} addition to the engine inlet was used to increase the NO{sub x} level, and the general trend was a decrease in UHC as the NO{sub x} level increased, both in cylinger, manifold and rector. From the data it is concluded that NO and NH{sub 3} addition have identical effects. The results show a 15-35% decrease in manifold UHC. However, the increased emissions of NO{sub x} and CO associated with this process must be realised. Field tests show a 28% UHC reduction without an increase in CO emission. The UHC oxidation in the exhaust reactor has been tested

  16. Lean-burn engines UHC emission reduction

    International Nuclear Information System (INIS)

    Karll, B.; Kristensen, P.G.; Nielsen, M.; Iskov, H.; Broe Bendtsen, A.; Glarborg, P.; Dam-Johansen, K.

    1999-01-01

    The effect of adding hydrogen to methane as a fuel for spark ignited engines has been extensively investigated. Both the possibility of adding a limited amount of hydrogen as well as equal amounts of hydrogen and carbon dioxide to natural gas has been investigated. A 10 vol% addition of hydrogen to the natural gas caused a reduction in UHC of approximately 40%, and an increase in efficiency of approximately three percentage points at the test engine. It is unknown if the gain is representative for large engines. Similar results for UHC reduction and efficiency were obtained for combined hydrogen and carbon dioxide addition. The carbon dioxide was added by exhaust gas recirculation. However, the price of hydrogen, makes this idea uneconomical even when carbon dioxide is readily available through recirculation of engine exhaust. Adiabatic prereforming may be used to convert natural gas into methane, hydrogen and carbon dioxide in order to generate hydrogen and at the same time increase the methane number. The process has been found to be competitive with adding of hydrogen but it is still not economical. The effect of NO/NO 2 on methane oxidation has been studied both theoretically and experimentally. A detailed kinetic modelling study of the UHC conversion dependency of exhaust gas parameters is reported and the project has contributed to the theoretical understanding of the oxidation chemistry. Both NO and NH 3 addition to the engine inlet was used to increase the NO x level, and the general trend was a decrease in UHC as the NO x level increased, both in cylinger, manifold and rector. From the data it is concluded that NO and NH 3 addition have identical effects. The results show a 15-35% decrease in manifold UHC. However, the increased emissions of NO x and CO associated with this process must be realised. Field tests show a 28% UHC reduction without an increase in CO emission. The UHC oxidation in the exhaust reactor has been tested at increased NO x levels and

  17. Reduction of CO2 emission by INCAM model in Malaysia biomass power plants during the year 2016.

    Science.gov (United States)

    Amin, Nor Aishah Saidina; Talebian-Kiakalaieh, Amin

    2018-03-01

    As the world's second largest palm oil producer and exporter, Malaysia could capitalize on its oil palm biomass waste for power generation. The emission factors from this renewable energy source are far lower than that of fossil fuels. This study applies an integrated carbon accounting and mitigation (INCAM) model to calculate the amount of CO 2 emissions from two biomass thermal power plants. The CO 2 emissions released from biomass plants utilizing empty fruit bunch (EFB) and palm oil mill effluent (POME), as alternative fuels for powering steam and gas turbines, were determined using the INCAM model. Each section emitting CO 2 in the power plant, known as the carbon accounting center (CAC), was measured for its carbon profile (CP) and carbon index (CI). The carbon performance indicator (CPI) included electricity, fuel and water consumption, solid waste and waste-water generation. The carbon emission index (CEI) and carbon emission profile (CEP), based on the total monthly carbon production, were determined across the CPI. Various innovative strategies resulted in a 20%-90% reduction of CO 2 emissions. The implementation of reduction strategies significantly reduced the CO 2 emission levels. Based on the model, utilization of EFB and POME in the facilities could significantly reduce the CO 2 emissions and increase the potential for waste to energy initiatives. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    Science.gov (United States)

    The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

  19. City-specific vehicle emission control strategies to achieve stringent emission reduction targets in China's Yangtze River Delta region.

    Science.gov (United States)

    Zhang, Shaojun; Wu, Ye; Zhao, Bin; Wu, Xiaomeng; Shu, Jiawei; Hao, Jiming

    2017-01-01

    The Yangtze River Delta (YRD) region is one of the most prosperous and densely populated regions in China and is facing tremendous pressure to mitigate vehicle emissions and improve air quality. Our assessment has revealed that mitigating vehicle emissions of NOx would be more difficult than reducing the emissions of other major vehicular pollutants (e.g., CO, HC and PM 2.5 ) in the YRD region. Even in Shanghai, where the emission control implemented are more stringent than in Jiangsu and Zhejiang, we observed little to no reduction in NOx emissions from 2000 to 2010. Emission-reduction targets for HC, NOx and PM 2.5 are determined using a response surface modeling tool for better air quality. We design city-specific emission control strategies for three vehicle-populated cities in the YRD region: Shanghai and Nanjing and Wuxi in Jiangsu. Our results indicate that even if stringent emission control consisting of the Euro 6/VI standards, the limitation of vehicle population and usage, and the scrappage of older vehicles is applied, Nanjing and Wuxi will not be able to meet the NOx emissions target by 2020. Therefore, additional control measures are proposed for Nanjing and Wuxi to further mitigate NOx emissions from heavy-duty diesel vehicles. Copyright © 2016. Published by Elsevier B.V.

  20. Provincial Carbon Emissions Reduction Allocation Plan in China Based on Consumption Perspective

    Directory of Open Access Journals (Sweden)

    Xuecheng Wang

    2018-04-01

    Full Text Available China is a country with substantial differences in economic development, energy consumption mix, resources, and technologies, as well as the development path at the provincial level. Therefore, China’s provinces have different potential and degrees of difficulty to carry out carbon emission reduction (CER requirements. In addition, interprovincial trade, with a large amount of embodied carbon emissions, has become the fastest growing driver of China’s total carbon emissions. A reasonable CER allocation plan is, therefore, crucial for realizing the commitment that China announced in the Paris Agreement. How to determine a fair way to allocate provincial CER duties has become a significant challenge for both policy-makers and researchers. In this paper, ecological network analysis (ENA, combined with a multi-regional input-output model (MRIO, is adopted to build an ecological network of embodied emissions across 30 provinces. Then, by using flow analysis and utility analysis based on the ENA model, the specific relationships among different provinces were determined, and the amount of responsibility that a certain province should take quantified, with respect to the embodied carbon emission (ECE flows from interprovincial trade. As a result, we suggest a new CER allocation plan, based on the detailed data of interprovincial relationships and ECE flows.

  1. Reviews on current carbon emission reduction technologies and projects and their feasibilities on ships

    Science.gov (United States)

    Wang, Haibin; Zhou, Peilin; Wang, Zhongcheng

    2017-06-01

    Concern about global climate change is growing, and many projects and researchers are committed to reducing greenhouse gases from all possible sources. International Maritime (IMO) has set a target of 20% CO2 reduction from shipping by 2020 and also presented a series of carbon emission reduction methods, which are known as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operation Indicator (EEOI). Reviews on carbon emission reduction from all industries indicate that, Carbon Capture and Storage (CCS) is an excellent solution to global warming. In this paper, a comprehensive literature review of EEDI and EEOI and CCS is conducted and involves reviewing current policies, introducing common technologies, and considering their feasibilities for marine activities, mainly shipping. Current projects are also presented in this paper, thereby illustrating that carbon emission reduction has been the subject of attention from all over the world. Two case ship studies indicate the economic feasibility of carbon emission reduction and provide a guide for CCS system application and practical installation on ships.

  2. The importance of grid integration for achievable greenhouse gas emissions reductions from alternative vehicle technologies

    International Nuclear Information System (INIS)

    Tarroja, Brian; Shaffer, Brendan; Samuelsen, Scott

    2015-01-01

    Alternative vehicles must appropriately interface with the electric grid and renewable generation to contribute to decarbonization. This study investigates the impact of infrastructure configurations and management strategies on the vehicle–grid interface and vehicle greenhouse gas reduction potential with regard to California's Executive Order S-21-09 goal. Considered are battery electric vehicles, gasoline-fueled plug-in hybrid electric vehicles, hydrogen-fueled fuel cell vehicles, and plug-in hybrid fuel cell vehicles. Temporally resolved models of the electric grid, electric vehicle charging, hydrogen infrastructure, and vehicle powertrain simulations are integrated. For plug-in vehicles, consumer travel patterns can limit the greenhouse gas reductions without smart charging or energy storage. For fuel cell vehicles, the fuel production mix must be optimized for minimal greenhouse gas emissions. The plug-in hybrid fuel cell vehicle has the largest potential for emissions reduction due to smaller battery and fuel cells keeping efficiencies higher and meeting 86% of miles on electric travel keeping the hydrogen demand low. Energy storage is required to meet Executive Order S-21-09 goals in all cases. Meeting the goal requires renewable capacities of 205 GW for plug-in hybrid fuel cell vehicles and battery electric vehicle 100s, 255 GW for battery electric vehicle 200s, and 325 GW for fuel cell vehicles. - Highlights: • Consumer travel patterns limit greenhouse gas reductions with immediate charging. • Smart charging or energy storage are required for large greenhouse gas reductions. • Fuel cells as a plug-in vehicle range extender provided the most greenhouse gas reductions. • Energy storage is required to meet greenhouse gas goals regardless of vehicle type. • Smart charging reduces the required energy storage size for a given greenhouse gas goal

  3. Analysis and application of a novel three-dimensional energy-saving and emission-reduction dynamic evolution system

    International Nuclear Information System (INIS)

    Fang, Guochang; Tian, Lixin; Sun, Mei; Fu, Min

    2012-01-01

    A novel three-dimensional energy-saving and emission-reduction chaotic system is proposed, which has not yet been reported in present literature. The system is established in accordance with the complicated relationship between energy-saving and emission-reduction, carbon emissions and economic growth. The dynamic behavior of the system is analyzed by means of Lyapunov exponents and bifurcation diagrams. With undetermined coefficient method, expressions of homoclinic orbits of the system are obtained. The Šilnikov theorem guarantees that the system has Smale horseshoes and the horseshoes chaos. Artificial neural network (ANN) is used to identify the quantitative coefficients in the simulation models according to the statistical data of China, and an empirical study of the real system is carried out with the results in perfect agreement with actual situation. It is found that the sooner and more perfect energy-saving and emission-reduction is started, the easier and sooner the maximum of the carbon emissions will be achieved so as to reduce carbon emissions and energy intensity. Numerical simulations are presented to demonstrate the results. -- Highlights: ► Use non-linear dynamical method to model the energy-saving and emission-reduction system. ► The energy-saving and emission-reduction attractor is obtained. ► Identify the unknown parameters of the energy-saving and emission-reduction system based on the statistical data. ► Evaluating the achievements of energy-saving and emission-reduction by the time-varying energy intensity calculation formula. ► Some statistical results based on the statistical data in China are presented, which are vivid and adherent to the reality.

  4. Developments in greenhouse gas emissions and net energy use in Danish agriculture - How to achieve substantial CO{sub 2} reductions?

    Energy Technology Data Exchange (ETDEWEB)

    Dalgaard, T., E-mail: tommy.dalgaard@agrsci.dk [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark); Olesen, J.E.; Petersen, S.O.; Petersen, B.M.; Jorgensen, U.; Kristensen, T.; Hutchings, N.J. [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark); Gyldenkaerne, S. [Aarhus University, National Environmental Research Institute, Frederiksborgvej 399, DK-4000 Roskilde (Denmark); Hermansen, J.E. [Aarhus University, Department of Agroecology, Blichers Alle 20, P.O. Box 50, DK-8830 Tjele (Denmark)

    2011-11-15

    Greenhouse gas (GHG) emissions from agriculture are a significant contributor to total Danish emissions. Consequently, much effort is currently given to the exploration of potential strategies to reduce agricultural emissions. This paper presents results from a study estimating agricultural GHG emissions in the form of methane, nitrous oxide and carbon dioxide (including carbon sources and sinks, and the impact of energy consumption/bioenergy production) from Danish agriculture in the years 1990-2010. An analysis of possible measures to reduce the GHG emissions indicated that a 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable, including mitigation measures in relation to the handling of manure and fertilisers, optimization of animal feeding, cropping practices, and land use changes with more organic farming, afforestation and energy crops. In addition, the bioenergy production may be increased significantly without reducing the food production, whereby Danish agriculture could achieve a positive energy balance. - Highlights: > GHG emissions from Danish agriculture 1990-2010 are calculated, including carbon sequestration. > Effects of measures to further reduce GHG emissions are listed. > Land use scenarios for a substantially reduced GHG emission by 2050 are presented. > A 50-70% reduction of agricultural emissions by 2050 relative to 1990 is achievable. > Via bioenergy production Danish agriculture could achieve a positive energy balance. - Scenario studies of greenhouse gas mitigation measures illustrate the possible realization of CO{sub 2} reductions for Danish agriculture by 2050, sustaining current food production.

  5. Smart Transportation CO2 Emission Reduction Strategies

    Science.gov (United States)

    Tarulescu, S.; Tarulescu, R.; Soica, A.; Leahu, C. I.

    2017-10-01

    Transport represents the sector with the fastest growing greenhouse gas emissions around the world. The main global objective is to reduce energy usage and associated greenhouse gas emissions from the transportation sector. For this study it was analyzed the road transportation system from Brasov Metropolitan area. The study was made for the transportation route that connects Ghimbav city to the main surrounding objectives. In this study ware considered four optimization measures: vehicle fleet renewal; building the detour belt for the city; road increasing the average travel speed; making bicycle lanes; and implementing an urban public transport system for Ghimbav. For each measure it was used a mathematical model to calculate the energy consumption and carbon emissions from the road transportation sector. After all four measures was analyzed is calculated the general energy consumption and CO2 reduction if this are applied from year 2017 to 2020.

  6. Reduction potential, shadow prices, and pollution costs of agricultural pollutants in China.

    Science.gov (United States)

    Tang, Kai; Gong, Chengzhu; Wang, Dong

    2016-01-15

    This paper analyses the reduction potential, shadow prices, and pollution costs of agricultural pollutants in China based on provincial panel data for 2001-2010. Using a parameterized quadratic form for the directional output distance function, we find that if agricultural sectors in all provinces were to produce on the production frontier, China could potentially reduce agricultural emissions of chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) by 16.0%, 16.2%, and 20.4%, respectively. Additionally, our results show that the shadow price of TN increased rapidly and continuously, while that of COD and TP fluctuated for the whole period. For the whole country, the average shadow price of COD, TN, and TP are 8266 Yuan/tonne, 25,560 Yuan/tonne, and 10,160 Yuan/tonne, respectively. The regional shadow prices of agricultural pollutants are unbalanced. Furthermore, we show that the pollution costs from emissions of COD, TN, and TP are 6.09% of the annual gross output value of the agricultural sector and are highest in the Western and lowest in the Eastern provinces. Our estimates suggest that there is scope for further pollution abatement and simultaneous output expansion for China's agriculture if farmers promote greater efficiency in their production process. Policymakers are required to dynamically adjust the pollution tax rates and ascertain the initial permit price in an emission trading system. Policymakers should also consider the different pollution costs for each province when making the reduction allocations within the agricultural sector. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Creating rigorous pathways to monetize methane and nitrous oxide emission reductions at small scale rice farms in three states of semi-arid peninsular India

    Science.gov (United States)

    Kritee, K.; Tiwari, R.; Nair, D.; Adhya, T. K.; Rudek, J.

    2014-12-01

    As a part of a joint undertaking by Environmental Defense Fund and the Fair Climate Network, we have measured reduction in methane and nitrous oxide emissions due to alternate "low carbon" rice cultivation practices for three ago-ecological zones in India for the past two years. Sampling for nitrous oxide and methane emissions was done on approximately 60-80% of the total number of days in a growing season and was based on modified GRACEnet protocol. In recognition of farmer's economic interest and global food security demands, we also measured the effect of rice cultivation practices on farm economics and yields. Our data from three agro-ecological zones for 2012-2014 suggest that, for semi-arid peninsular India, low-carbon rice cultivation practices offer large range of emission reduction potential (0.5-5 metric tons CO2e/acre/year). The regions with sandy soils (Alfisols) had high rates of nitrous oxide emissions even under baseline "flooded" rice cultivation regimes and, thus, the Tier 1 IPCC emissions factors grossly underestimate both the amount of nitrous oxide emission from conventional rice cultivation practices, and the extent to which it can be reduced through better fertilizer management. Also, the IPCC factors overestimate the methane emission reduction possible due to water management for rice paddies. Therefore, it is crucial to customize N and water management to each region such that yields and net GHG emission reduction are maximized. These practices also have the potential to decrease water use by 10-30% and improve long term soil health by optimizing organic matter and increasing water-holding capacity. In addition, through GPS based demarcation of farmer plots, recording baseline practices through extensive surveys, documenting the parameters required to aggregate and prove implementation of low carbon rice farming practices, and to model the GHG emission reduction over large scales, we have put forward a path for better monetization of GHG

  8. Particulate matter emissions from biochar-amended soils as a potential tradeoff to the negative emission potential

    Science.gov (United States)

    Ravi, Sujith; Sharratt, Brenton S.; Li, Junran; Olshevski, Stuart; Meng, Zhongju; Zhang, Jianguo

    2016-10-01

    Novel carbon sequestration strategies such as large-scale land application of biochar may provide sustainable pathways to increase the terrestrial storage of carbon. Biochar has a long residence time in the soil and hence comprehensive studies are urgently needed to quantify the environmental impacts of large-scale biochar application. In particular, black carbon emissions from soils amended with biochar may counteract the negative emission potential due to the impacts on air quality, climate, and biogeochemical cycles. We investigated, using wind tunnel experiments, the particulate matter emission potential of a sand and two agriculturally important soils amended with different concentrations of biochar, in comparison to control soils. Our results indicate that biochar application considerably increases particulate emissions possibly by two mechanisms-the accelerated emission of fine biochar particles and the generation and emission of fine biochar particles resulting from abrasion of large biochar particles by sand grains. Our study highlights the importance of considering the background soil properties (e.g., texture) and geomorphological processes (e.g., aeolian transport) for biochar-based carbon sequestration programs.

  9. Biomass District Energy Trigeneration Systems: Emissions Reduction and Financial Impact

    International Nuclear Information System (INIS)

    Rentizelas, A.; Tolis, A.; Tatsiopoulos, I.

    2009-01-01

    Biomass cogeneration is widely used for district heating applications in central and northern Europe. Biomass trigeneration on the other hand, constitutes an innovative renewable energy application. In this work, an approved United Nations Framework Convention on Climate Change baseline methodology has been extended to allow the examination of biomass trigeneration applications. The methodology is applied to a case study in Greece to investigate various environmental and financial aspects of this type of applications. The results suggest that trigeneration may lead to significant emissions reduction compared to using fossil fuels or even biomass cogeneration and electricity generation. The emissions reduction achieved may be materialized into a considerable revenue stream for the project, if traded through a trading mechanism such as the European Union Greenhouse Gas Emission Trading Scheme. A sensitivity analysis has been performed to compensate for the high volatility of the emission allowances' value and the immaturity of the EU Trading Scheme, which prevent a reliable estimation of the related revenue. The work concludes that emission allowances trading may develop into one of the major revenue streams of biomass trigeneration projects, significantly increasing their financial yield and attractiveness. The impact on the yield is significant even for low future values of emission allowances and could become the main income revenue source of such projects, if emission allowances increase their value substantially. The application of trigeneration for district energy proves to lead to increased environmental and financial benefits compared to the cogeneration or electricity generation cases

  10. Innovative technologies for greenhouse gas emission reduction in steel production

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2016-01-01

    Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

  11. Ozone response to emission reductions in the southeastern United States

    Directory of Open Access Journals (Sweden)

    C. L. Blanchard

    2018-06-01

    Full Text Available Ozone (O3 formation in the southeastern US is studied in relation to nitrogen oxide (NOx emissions using long-term (1990s–2015 surface measurements of the Southeastern Aerosol Research and Characterization (SEARCH network, U.S. Environmental Protection Agency (EPA O3 measurements, and EPA Clean Air Status and Trends Network (CASTNET nitrate deposition data. Annual fourth-highest daily peak 8 h O3 mixing ratios at EPA monitoring sites in Georgia, Alabama, and Mississippi exhibit statistically significant (p  <  0.0001 linear correlations with annual NOx emissions in those states between 1996 and 2015. The annual fourth-highest daily peak 8 h O3 mixing ratios declined toward values of ∼ 45–50 ppbv and monthly O3 maxima decreased at rates averaging ∼ 1–1.5 ppbv yr−1. Mean annual total oxidized nitrogen (NOy mixing ratios at SEARCH sites declined in proportion to NOx emission reductions. CASTNET data show declining wet and dry nitrate deposition since the late 1990s, with total (wet plus dry nitrate deposition fluxes decreasing linearly in proportion to reductions of NOx emissions by ∼ 60 % in Alabama and Georgia. Annual nitrate deposition rates at Georgia and Alabama CASTNET sites correspond to 30 % of Georgia emission rates and 36 % of Alabama emission rates, respectively. The fraction of NOx emissions lost to deposition has not changed. SEARCH and CASTNET sites exhibit downward trends in mean annual nitric acid (HNO3 concentrations. Observed relationships of O3 to NOz (NOy–NOx support past model predictions of increases in cycling of NO and increasing responsiveness of O3 to NOx. The study data provide a long-term record that can be used to examine the accuracy of process relationships embedded in modeling efforts. Quantifying observed O3 trends and relating them to reductions in ambient NOy species concentrations offers key insights into processes of general relevance to air quality management and

  12. Reduction of ruminant methane emissions - a win-win-win opportunity for business, development, and the environment

    Energy Technology Data Exchange (ETDEWEB)

    Livingston, R. [Appropriate Technology International, Washington, DC (United States)

    1997-12-31

    This paper describes research efforts of The Global Livestock Producers Program (GLPP) in establishing self-sustaining enterprises for cost-effective technologies (i.e., animal nutrition and genetic improvement) and global methane emissions reductions in developing world nations. The US Environmental Protection Agency has funded several studies to examine the possibilities of reducing ruminant methane emissions in India, Tanzania, Bangladesh, and Brazil. The results of the studies showed that: (1) many developing countries` production systems are inefficient, and (2) great potential exists for decreasing global methane emissions through increasing animal productivity. From this effort, the GLPP established livestock development projects in India, Zimbabwe, and Tanzania, and is developing projects for Bangladesh, Nepal, and Brazil. The GLPP has developed a proven methodology for assessing ruminant methane and incorporating methane emissions monitoring into viable projects.

  13. Possibilities for Carbon Dioxide Emission Reduction Resulting from Nuclear Power Use

    International Nuclear Information System (INIS)

    Bozicevic, M.; Tomsic, Z.; Kovacevic, T.

    1998-01-01

    Each energy resource is connected to certain environmental impacts and risks which must be taken into account. In recent years attention has been focused on the climate change effects of the burning fossil fuels, especially coal, due to the carbon dioxide which this releases into the atmosphere. If the electric energy produced in nuclear power plants were produced in coal-fired plants, global CO 2 emissions would rise for more than 2000 million tons, a significant value in comparison with 4000 million tons which is recommended as a target for emission reduction by the year 2005 at the Toronto Conference on the Changing Atmosphere. Possibilities for carbon dioxide emission reduction which would be the result of the nuclear option acceptance are discussed in this paper. (author)

  14. The international research progress of Ammonia(NH3) emissions and emissions reduction technology in farmland ecosystem

    Science.gov (United States)

    Yang, W. Z.; Jiao, Y.

    2017-03-01

    NH3 is the important factor leading to the grey haze, and one of the main causes of environmental problems of serious ecological imbalance, such as acid rain and air quality deterioration. The fertilizer excessive application of the current farmland results NH3 emissions intensity greatly. In order to clear the farmland NH3 emissions research status and achievements, the literature of farmland NH3 emission related were retrievaled by the SCI journals and Chinese science citation database. Some factors of NH3 emission were analyzed such as soil factors, climate factors and farmland management measures. The research progress was inductived on farmland NH3 emission reduction technology. The results will help to clarify farmland NH3 emissions research progress. The theoretical guidance was provided on the future of farmland NH3 emissions research.

  15. Potential CO{sub 2} reduction by fuel substitution to generate electricity in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Masjuki, H.H.; Mahlia, T.M.I.; Choudhury, I.A.; Saidur, R. [University of Malaysia, Kuala Lumpur (Malaysia). Dept. of Mechanical Engineers

    2002-04-01

    Because of changing fossil fuel prices, sources and environmental consciousness, Malaysian utilities have been forced to change the type of energy sources to generate electricity. This new policy of electricity generation companies will change fuel use gradually from 70% gas, 15% coal, 10% hydro and 5% petroleum in the year 2000 to 40% gas, 30% hydro, 29% coal and only 1% petroleum in the year of 2020. These changes tend to reduce CO{sub 2} emission. This study predicts the potential CO{sub 2} reduction due to these changes. The calculation is based on CO{sub 2} emission for unit electricity generated and the changing type of fuel percentages for electricity generation in Malaysia. The study found that the substitution will reduce CO{sub 2} emission from power plants in this country.

  16. Estimate of Possible CO2 Emission Reduction in Slovenia

    International Nuclear Information System (INIS)

    Plavcak, V.-P.; Jevsek, F.; Tirsek, A.

    1998-01-01

    The first estimation of possible CO 2 emission reduction, according to the obligations from Kyoto Protocol, is prepared. The results show that the required 8% reduction of greenhouses gases in Slovenia in the period from 2008 to 2012 with regard to year 1986 will require a through analytical treatment not only in electric power sector but also in transport and industry sectors, which are the main pollutants. (author)

  17. Catalytically supported reduction of emissions from small-scale biomass furnace systems

    International Nuclear Information System (INIS)

    Hartmann, Ingo; Lenz, Volker; Schenker, Marian; Thiel, Christian; Kraus, Markus; Matthes, Mirjam; Roland, Ulf; Bindig, Rene; Einicke, Wolf-Dietrich

    2011-01-01

    The increased use of solid biomass in small combustion for generating heat from renewable energy sources is unfortunately associated with increased emissions of airborne pollutants. The reduction is possible on the one hand by the use of high-quality modern furnaces to the latest state of the art. On the other hand, several promising approaches method for retrofitting small-scale furnaces are currently being developed that will allow an effective emission reduction by the subsequent treatment of the exhaust gas. The overview of current available emission control technologies for small-scale biomass combustion plants shows that there is still considerable need for research on the sustainable production of heat from solid biofuels. The amendment to the 1st BImSchV provides a necessary drastic reduction of discharged pollutants from small-scale biomass furnaces. When using the fuel wood in modern central heating boilers the required limits can be met at full load. However, dynamic load changes can cause brief dramatic emission increases even with wood central heating boilers. Firebox and control optimization must contribute in the future to a further reduction of emissions. The typical simple single-room fireplaces like hand-fed wood stoves are suitable under type test conditions to comply the limit values. By contrast, in practical operation, the harmful gas emissions be exceeded without secondary measures normally. The performed experimental investigations show that a reduction of both CO and of organic compounds by catalytic combustion is possible. In addition to developing specially adapted catalysts, it is necessary to provide additional dust separation by combined processes, since conventional catalysts are not suitable for deposition and retention of particulate matter or would lose their activity due to dust accumulation on the active surface, when the catalyst would act as a filter at the same time. To enable sufficiently high reaction temperatures and thus a

  18. Climate Change and employment. Impact on employment in the European Union-25 of climate change and CO2 emission reduction measures by 2030

    Energy Technology Data Exchange (ETDEWEB)

    Dupressoir, S.; Belen Sanchez, A.; Bobe, P.; Hoefele, V. (and others)

    2007-05-15

    This study was intended provide an analysis of the potential costs and benefits for employment of the policies and measures against climate change as well as of the manifestations of the consequences of climate change in Europe. This report comprises two divisions. The first, entitled 'Impact of climate change', attempts to determine the potential impact on employment in Europe of the consequences of climate change (Part 1). The second, entitled 'Impact of CO2 emission reduction measures', analyses the potential implications for employment of climate-change prevention policies in the EU with time-horizons of 2012 and 2030 (Parts 2 to 4). The conclusions and recommendations of the study appear in four parts : Part 1 analyses the potential consequences for employment of climatic warming in Europe; Part 2 presents the objectives, the hypotheses and the methodology of the 'impact of CO2 emission reduction measures' division; Part 3 analyses the foreseeable effects of CO2 emission reduction measures on employment in Europe; Part 4 offers general (or sector-wide) recommendations for measures and policies to promote positive effects and prevent negative effects. The concluding part discusses the uncertainties and identifies the questions deserving further investigation.

  19. Quantifying the emissions reduction effectiveness and costs of oxygenated gasoline

    International Nuclear Information System (INIS)

    Lyons, C.E.

    1993-01-01

    During the fall, winter, and spring of 1991-1992, a measurement program was conducted in Denver, Colorado to quantify the technical and economic effectiveness of oxygenated gasoline in reducing automobile carbon monoxide (CO) emissions. Emissions from 80,000 vehicles under a variety of operating conditions were measured before, during, and after the seasonal introduction of oxygenated gasoline into the region. Gasoline samples were taken from several hundred vehicles to confirm the actual oxygen content of the fuel in use. Vehicle operating conditions, such as cold starts and warm operations, and ambient conditions were characterized. The variations in emissions attributable to fuel type and to operating conditions were then quantified. This paper describes the measurement program and its results. The 1991-1992 Colorado oxygenated gasoline program contributed to a reduction in carbon monoxide (CO) emissions from gasoline-powered vehicles. The measurement program demonstrated that most of the reduction is concentrated in a small percentage of the vehicles that use oxygenated gasoline. The remainder experience little or not reduction in emissions. The oxygenated gasoline program outlays are approximately $25 to $30 million per year in Colorado. These are directly measurable costs, incurred through increased government expenditures, higher costs to private industry, and losses in fuel economy. The measurement program determined the total costs of oxygenated gasoline as an air pollution control strategy for the region. Costs measured included government administration and enforcement, industry production and distribution, and consumer and other user costs. This paper describes the ability of the oxygenated gasoline program to reduce pollution; the overall cost of the program to government, industry, and consumers; and the effectiveness of the program in reducing pollution compared to its costs

  20. Potential Greenhouse Gas Emissions Reductions from Optimizing Urban Transit Networks

    Science.gov (United States)

    2016-05-01

    Public transit systems with efficient designs and operating plans can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but many current transit systems have not been designed to reduce environmental impacts. This ...

  1. Assessment of Alternative Scenarios for CO2 Reduction Potential in the Residential Building Sector

    Directory of Open Access Journals (Sweden)

    Young-Sun Jeong

    2017-03-01

    Full Text Available The South Korean government announced its goals of reducing the country’s CO2 emissions by up to 30% below the business as usual (BAU projections by 2020 in 2009 and 37% below BAU projections by 2030 in 2015. This paper explores the potential energy savings and reduction in CO2 emissions offered by residential building energy efficiency policies and plans in South Korea. The current and future energy consumption and CO2 emissions in the residential building were estimated using an energy–environment model from 2010 to 2030. The business as usual scenario is based on the energy consumption characteristic of residential buildings using the trends related to socio-economic prospects and the number of dwellings. The alternative scenarios took into account energy efficiency for new residential buildings (scenario I, refurbishment of existing residential buildings (scenario II, use of highly efficient boilers (scenario III, and use of a solar thermal energy system (scenario IV. The results show that energy consumption in the residential building sector will increase by 33% between 2007 and 2030 in the BAU scenario. Maximum reduction in CO2 emissions in the residential building sector of South Korea was observed by 2030 in scenario I. In each alternative scenario analysis, CO2 emissions were 12.9% lower than in the business as usual scenario by the year 2030.

  2. Transition paths towards CO2 emission reduction in the steel industry

    NARCIS (Netherlands)

    Daniëls, Berend Wilhelm

    2002-01-01

    Radiative forcing, better known as the Greenhouse Effect, is probably the major 21st century environmental problem. Its probable cause is the anthropogenic emission of greenhouse gases, especially CO2. The Kyoto agreement enforces considerable reductions of the GHG emissions in 2010, with 6 to 8% of

  3. Experimental investigation on emission reduction in neem oil biodiesel using selective catalytic reduction and catalytic converter techniques.

    Science.gov (United States)

    Viswanathan, Karthickeyan

    2018-05-01

    In the present study, non-edible seed oil namely raw neem oil was converted into biodiesel using transesterification process. In the experimentation, two biodiesel blends were prepared namely B25 (25% neem oil methyl ester with 75% of diesel) and B50 (50% neem oil methyl ester with 50% diesel). Urea-based selective catalytic reduction (SCR) technique with catalytic converter (CC) was fixed in the exhaust tail pipe of the engine for the reduction of engine exhaust emissions. Initially, the engine was operated with diesel as a working fluid and followed by refilling of biodiesel blends B25 and B50 to obtain the baseline readings without SCR and CC. Then, the same procedure was repeated with SCR and CC technique for emission reduction measurement in diesel, B25 and B50 sample. The experimental results revealed that the B25 blend showed higher break thermal efficiency (BTE) and exhaust gas temperature (EGT) with lower break-specific fuel consumption (BSFC) than B50 blend at all loads. On comparing with biodiesel blends, diesel experiences increased BTE of 31.9% with reduced BSFC of 0.29 kg/kWh at full load. A notable emission reduction was noticed for all test fuels in SCR and CC setup. At full load, B25 showed lower carbon monoxide (CO) of 0.09% volume, hydrocarbon (HC) of 24 ppm, and smoke of 14 HSU and oxides of nitrogen (NOx) of 735 ppm than diesel and B50 in SCR and CC setup. On the whole, the engine with SCR and CC setup showed better performance and emission characteristics than standard engine operation.

  4. Achieving Realistic Energy and Greenhouse Gas Emission Reductions in U.S. Cities

    Science.gov (United States)

    Blackhurst, Michael F.

    2011-12-01

    In recognizing that energy markets and greenhouse gas emissions are significantly influences by local factors, this research examines opportunities for achieving realistic energy greenhouse gas emissions from U.S. cities through provisions of more sustainable infrastructure. Greenhouse gas reduction opportunities are examined through the lens of a public program administrator charged with reducing emissions given realistic financial constraints and authority over emissions reductions and energy use. Opportunities are evaluated with respect to traditional public policy metrics, such as benefit-cost analysis, net benefit analysis, and cost-effectiveness. Section 2 summarizes current practices used to estimate greenhouse gas emissions from communities. I identify improved and alternative emissions inventory techniques such as disaggregating the sectors reported, reporting inventory uncertainty, and aligning inventories with local organizations that could facilitate emissions mitigation. The potential advantages and challenges of supplementing inventories with comparative benchmarks are also discussed. Finally, I highlight the need to integrate growth (population and economic) and business as usual implications (such as changes to electricity supply grids) into climate action planning. I demonstrate how these techniques could improve decision making when planning reductions, help communities set meaningful emission reduction targets, and facilitate CAP implementation and progress monitoring. Section 3 evaluates the costs and benefits of building energy efficiency are estimated as a means of reducing greenhouse gas emissions in Pittsburgh, PA and Austin, TX. Two policy objectives were evaluated: maximize GHG reductions given initial budget constraints or maximize social savings given target GHG reductions. This approach explicitly evaluates the trade-offs between three primary and often conflicting program design parameters: initial capital constraints, social savings

  5. The effectiveness of policy on consumer choices for private road passenger transport emissions reductions in six major economies

    Science.gov (United States)

    Mercure, J.-F.; Lam, A.

    2015-06-01

    The effectiveness of fiscal policy to influence vehicle purchases for emissions reductions in private passenger road transport depends on its ability to incentivise consumers to make choices oriented towards lower emissions vehicles. However, car purchase choices are known to be strongly socially determined, and this sector is highly diverse due to significant socio-economic differences between consumer groups. Here, we present a comprehensive dataset and analysis of the structure of the 2012 private passenger vehicle fleet-years in six major economies across the World (UK, USA, China, India, Japan and Brazil) in terms of price, engine size and emissions distributions. We argue that choices and aggregate elasticities of substitution can be predicted using this data, enabling us to evaluate the effectiveness of potential fiscal and technological change policies on fleet-year emissions reductions. We provide tools to do so based on the distributive structure of prices and emissions in segments of a diverse market, both for conventional as well as unconventional engine technologies. We find that markets differ significantly between nations, and that correlations between engine sizes, emissions and prices exist strongly in some markets and not strongly in others. We furthermore find that markets for unconventional engine technologies have patchy coverages of varying levels. These findings are interpreted in terms of policy strategy.

  6. Assessing the potential of hybrid energy technology to reduce exhaust emissions from global shipping

    International Nuclear Information System (INIS)

    Dedes, Eleftherios K.; Hudson, Dominic A.; Turnock, Stephen R.

    2012-01-01

    The combination of a prime mover and an energy storage device for reduction of fuel consumption has successfully been used in automotive industry. The shipping industry has utilised this for conventional submarines. The potential of a load levelling strategy through use of a hybrid battery–diesel–electric propulsion system is investigated. The goal is to reduce exhaust gas emissions by reducing fuel oil consumption through consideration of a re-engineered ship propulsion system. This work is based on operational data for a shipping fleet containing all types of bulk carriers. The engine loading and the energy requirements are calculated, and sizing of suitable propulsion and the battery storage system are proposed. The changes in overall emissions are estimated and the potential for fuel savings identified. The efficiency of the system depends on the storage medium type, the availability of energy and the displacement characteristics of the examined vessels. These results for the global fleet indicate that savings depending on storage system, vessel condition and vessel type could be up to 0.32 million tonnes in NO x , 0.07 million tonnes in SO x and 4.1 million tonnes in CO 2 . These represent a maximum 14% of reduction in dry bulk sector and 1.8% of world's fleet emissions. - Highlights: ► Global shipping makes a significant contribution to CO 2 , SO x and NO x emissions. ► We examine noon reports from a fleet of bulk carriers to identify the amount engine is operating off design. ► A hybrid propulsion system is proposed that uses multiple diesel–electric generators and battery storage. ► Analysis indicates hybrid may give an attractive rate of return as well as emissions savings in emissions. ► Implementation will require review of class society regulations.

  7. A supply chain optimization framework for CO2 emission reduction : Case of the Netherlands

    NARCIS (Netherlands)

    Kalyanarengan Ravi, N.; Zondervan, E.; van Sint Annaland, M.; Fransoo, J.C.; Grievink, J.; Claus, T.; Herrmann, F.; Manitz, M.; Rose, O.

    2016-01-01

    A major challenge for the industrial deployment of a CO2 emission reduction methodology is to reduce the overall cost and the integration of all the nodes in the supply chain for CO2 emission reduction. In this work, we develop a mixed integer linear optimization model that selects appropriate

  8. Assesment of Energy Options for CO2 Emission Reduction

    International Nuclear Information System (INIS)

    Cavlina, Nikola

    2014-01-01

    Since the 1992 Earth Summit in Rio de Janeiro, global anthropogenic CO 2 emissions grew by 52% which caused an increase in 10.8% in the CO 2 concentration in the atmosphere, and it tipped the 400 ppm mark in May 2013. The Fifth Assessment Report on climate impacts from the Intergovernmental Panel on Climate Change (IPCC) confirmed earlier warnings that climate change is already stressing human communities, agriculture, and natural ecosystems, and the effects are likely to increase in the future. While European Union has long been committed to lowering carbon emissions, this places additional pressure on current EU goals for energy sector that includes significant reduction of CO 2 emissions. Current EU commitment has been formalized in so-called '20-20-20' plan, reducing carbon emissions, increasing energy efficiency and increasing energy production from renewables by 20% by 2020. Some EU member states are even more ambitious, like United Kingdom, planning to reduce carbon emissions by 80% by 2050. Bulk of carbon reduction will have to be achived in energy sector. In the power industry, most popular solution is use of solar and wind power. Since their production varies significantly during the day, for the purpose of base-load production they can be paired with gas-fired power plant. Other possible CO 2 -free solution is nuclear power plant. In this invited lecture, predicted cost of energy production for newly bulit nuclear power plant and newly built combination of wind or solar and gas-fired power plant are compared. Comparison was done using Levelized Unit of Energy Cost (LUEC). Calculations were performed using the Monte Carlo method. For input parameters that have biggest uncertainty (gas cost, CO 2 emission fee) those uncertainties were addressed not only through probability distribution around predicted value, but also through different scenarious. (author)

  9. Suppression of nitrogen oxides emission by carbonaceous reductants

    International Nuclear Information System (INIS)

    Tomita, A.

    2001-01-01

    The present status of NO x emission from power stations and automobiles is first summarized, and the controlling regulations in respective areas are reviewed. In spite of much progress, we have to further reduce the NO x emission in all the areas. In order to develop more effective technology, the fundamental understanding of the relevant reactions is essential. The heterogeneous reactions, like NO x and N 2 O formation from coal char, NO x and N 2 O reduction with carbon, and NO x reduction with hydrocarbon gases over heterogeneous catalysts are not well understood yet. This paper briefly summarizes our recent studies on the heterogeneous reactions of NO x formation and destruction. The importance of surface nitrogen species is emphasized in all the reaction systems. The presence of such surface species plays a very important role, not only in NO x destruction on carbon surfaces, but also in the NO x release during coal char combustion. Finally, future research areas are identified, where we need to understand what actually happens under high-temperature reaction conditions

  10. Life cycle assessment of biomass-to-energy systems in Ireland modelled with biomass supply chain optimisation based on greenhouse gas emission reduction

    International Nuclear Information System (INIS)

    Murphy, Fionnuala; Sosa, Amanda; McDonnell, Kevin; Devlin, Ger

    2016-01-01

    The energy sector is the major contributor to GHG (greenhouse gas emissions) in Ireland. Under EU Renewable energy targets, Ireland must achieve contributions of 40%, 12% and 10% from renewables to electricity, heat and transport respectively by 2020, in addition to a 20% reduction in GHG emissions. Life cycle assessment methodology was used to carry out a comprehensive, holistic evaluation of biomass-to-energy systems in 2020 based on indigenous biomass supply chains optimised to reduce production and transportation GHG emissions. Impact categories assessed include; global warming, acidification, eutrophication potentials, and energy demand. Two biomass energy conversion technologies are considered; co-firing with peat, and biomass CHP (combined heat and power) systems. Biomass is allocated to each plant according to a supply optimisation model which ensures minimal GHG emissions. The study shows that while CHP systems produce lower environmental impacts than co-firing systems in isolation, determining overall environmental impacts requires analysis of the reference energy systems which are displaced. In addition, if the aims of these systems are to increase renewable energy penetration in line with the renewable electricity and renewable heat targets, the optimal scenario may not be the one which achieves the greatest environmental impact reductions. - Highlights: • Life cycle assessment of biomass co-firing and CHP systems in Ireland is carried out. • GWP, acidification and eutrophication potentials, and energy demand are assessed. • Biomass supply is optimised based on minimising GHG emissions. • CHP systems cause lower environmental impacts than biomass co-firing with peat. • Displacing peat achieves higher GHG emission reductions than replacing fossil heat.

  11. Possibilities for the emissions reduction of smoke particles in the flue emissions of diesel motors

    International Nuclear Information System (INIS)

    Mikarovska Vesna; Stojanovski, Vasko

    2000-01-01

    Taking into consideration the fact that the traffic needs have been increased, the international committee through its associations make efforts in order to find more effective measures for the environmental protection. In this contest the international regulations are very rigorous towards the quality and quantity of the exhaust gases emission from the engines with internal combustion. In this paper the normative and limitations of the exhaust emission of compression ignition engines are presented. Also, the results from experimental investigations of transport vehicles with different time of exploitation and passed kilometers are given, as well as the factors that influent to the smoke component reduction in exhaust emission. (Authors)

  12. Syncrude emissions reduction project

    Energy Technology Data Exchange (ETDEWEB)

    Fiedler, M.A. [Alstom Power Inc., Knoxville, TN (United States); Ibbotson, P. [Syncrude Canada Ltd., Calgary, AB (Canada)

    2008-07-01

    This paper described an emissions reduction project conducted by Syncrude Canada and various other companies currently developing and processing oil sands in Alberta. Syncrude's upgrader expansion program included the installation of an ammonia-based wet flue gas desulfurizer (FGD) designed to remove sulphur dioxide (SO{sub 2}) from a coker train. Syncrude is also installing the FGD technology at its existing plants. It is expected that installation of the FGDs will reduced total site emissions of SO{sub 2} by 60 per cent. The fluid cokers are used to crack the long hydrocarbon chain bitumen molecules into shorter molecules. It is expected that the FGD system will also reduce particulate and SO{sub 3} levels. The FGD system was selected after an evaluation of technologies used by the coal-fired power industry. A dry FGD system was selected to operate above the water saturation temperature of the flue gas. Calcium oxide was used as a reagent. Hot gas was quenched in a spray dryer absorber with a slurry of calcium hydroxide. Rotary atomizers were used to developer uniform droplets of slurry. The system's fabric filter was a low ratio reverse gas-cleaned unit. Particulate matter from the gases was deposited on the interior of the filter bags. Clean hot gas was drawn through reverse gas fans into a reverse gas manifold. A timeline of the FGD technology installation process was included. 3 tabs., 28 figs.

  13. Proceedings of the 1997 diesel engine emissions reduction workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This conference was held July 28--31, 1997 in La Jolla, California. The purpose of this conference was to provide a multidisciplinary forum for exchange of state-of-the-art information on diesel engine emissions issues. Diesel engine manufacturers have significantly reduced emission of nitrogen oxides and particulates over the last 12 years. Currently there is concern about the 4% contribution of carbon dioxide from the combustion of fossil fuels to the atmosphere and its role in the greenhouse effect. The 56 papers in this report are arranged under the following topical headings: Agency diesel engine emissions and concerns; Human health effects -- Diesel exhaust; Aftertreatment -- Non-thermal plasma; Aftertreatment and in-cylinder emissions reduction; Combustion, fuel, and air management; Fuels and associated technology; and Advanced technology. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  14. Strategic research on CO2 emission reduction for China. Application of MARKAL to China energy system

    International Nuclear Information System (INIS)

    Wang Yongping

    1995-09-01

    MARKAL was applied to the energy system for analyzing the CO 2 emission reduction in China over the time period from 1990 to 2050. First the Chinese Reference Energy System (CRES) was established based on the framework of MARKAL model. The following conclusions can be drawn from this study. When shifting from scenario LH (low useful energy demand and high import fuel prices) to HL (high demand and low prices), another 33 EJ of primary energy will be consumed and another 2.31 billion tons of CO 2 will be emitted in 2050. Detailed analyses on the disaggregation of CO 2 emissions by Kaya Formula show. The energy intensity (primary energy/GDP) decreases much faster in scenario HL, but the higher growth rate of GDP per capita is the overwhelming factor that results in higher CO 2 emission per capita in the baseline case of scenario HL in comparison with LH. When the carbon taxes are imposed on CO 2 emissions, the residential sector will make the biggest contribution to CO 2 emission abatement from a long-term point of view. However, it's difficult to stabilize CO 2 emission per capita before 2030 in both scenarios even with heavy carbon taxes. When nuclear moratorium occurs, more 560 million tons of CO 2 will be emitted to the atmosphere in 2050 under the same CO 2 tax regime. From the analysis of value flow, CO 2 emission reduction depends largely on new or advanced technologies particularly in the field of electricity generation. The competent technologies switch to those CO 2 less-emitting technologies when surcharging CO 2 emissions. Nuclear power shows significant potential in saving fossil energy resources and reducing CO 2 emissions. (J.P.N.)

  15. The economic impacts of emission reduction policies

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, D.A.

    1992-07-01

    Environmental expenditures, or environmental tax revenues, e.g., carbon taxes are potentially significant components of the US macroeconomy. This paper presents a simple model of the role of environmental abatement expenditures and/or emission taxes from the viewpoint of economic efficiency, welfare and potential macroeconomic effects.

  16. The economic impacts of emission reduction policies

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, D.A.

    1992-01-01

    Environmental expenditures, or environmental tax revenues, e.g., carbon taxes are potentially significant components of the US macroeconomy. This paper presents a simple model of the role of environmental abatement expenditures and/or emission taxes from the viewpoint of economic efficiency, welfare and potential macroeconomic effects.

  17. Emission reduction potentials of improved cookstoves and their issues in adoption: An Indian outlook.

    Science.gov (United States)

    Sharma, Monikankana; Dasappa, S

    2017-12-15

    Biomass as a fuel for cooking is a common practice in rural India, and about 700 million people use traditional stoves to meet their energy demand. However, the thermal and the combustion efficiencies of these stoves are very low, leading to an inefficient use of biomass, and also, resulting in significant indoor air pollution. Research development has however led to the development of some improved stoves viz., natural draft and forced draft for both domestic as well as large scale cooking applications and government is trying to promote them. Forced draft stoves using processed biomass fuels (pellets) have received more prominence due to their superior performance, however, higher initial cost and limited fuel distribution networks have remained the key challenges. Improved natural draft stoves too have gained attention for being relatively inexpensive, and they are more likely to hit the rural households. In this paper, we have examined the environmental benefits obtained by the use of improved stoves for two important scenarios: traditional stoves are replaced by (i)improved natural draft stoves and, (ii) by improved natural draft as well as forced draft stoves. In the best case scenario (case ii), i.e., by shifting 111 million households who currently use wood to the forced draft stoves, and another 45 million households who are dependent on dung cake and agro residues to the improved natural draft stoves, the emission reduction that can be achieved are as follows: particulate matter (PM) 875 kT, black carbon (BC) 229 kT, organic carbon (OC) 525 kT, methane (CH 4 )1178 kT and non methane hydrocarbon (NMHC) of 564 kT. With the promotion of only natural draft improved stoves, the total reductions would be ∼12% lower than the combinational promotion. The CO 2 equivalent reduction is estimated to be ∼70-80 MT per year. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Potential of greenhouse gas emission reductions in soybean farming

    DEFF Research Database (Denmark)

    Mohammadi, Ali; Dalgaard, Tommy; Knudsen, Marie Trydeman

    2013-01-01

    Joint implementation of Life Cycle Assessment (LCA) and Data Envelopment Analysis (DEA) has recently showed to be a suitable tool for measuring efficiency in agri-food systems. In the present study, LCA + DEA methodologies were applied for a total of 94 soybean farms in Iran to benchmark the leve...... residue in the field generate significantly more greenhouse gas emissions than other farms. The raising of operational input efficiency and limiting of crop residue burning in the field are recommended options to ensure more environmental friendly soybean farming systems in the region....

  19. Carbon flow analysis and Carbon emission reduction of FCC in Chinese oil refineries

    Science.gov (United States)

    Jia, Fengrui; Wei, Na; Ma, Danzhu; Liu, Guangxin; Wu, Ming; Yue, Qiang

    2017-08-01

    The major problem of the energy production in oil refineries is the high emission of CO2 in China. The fluid catalytic cracking unit (FCC) is the key source of carbon emission in the oil refineries. According to the statistical data, the carbon emission of FCC unit accounts for more than 31% for the typical oil refineries. The carbon flow of FCC in the typical Chinese oil refineries were evaluated and analysed, which aimed at the solution of CO2 emission reduction. The method of substances flow analysis (SFA) and the mathematical programming were used to evaluate the carbon metabolism and optimize the carbon emission. The results indicated that the combustion emission of the reaction-regeneration subsystem (RRS) was the major source of FCC. The quantity of CO2 emission of RSS was more than 90%. The combustion efficiency and the amount of residual oil affected the carbon emission of RRS most according to the optimized analysis of carbon emission reduction. Moreover, the fractionation subsystem (TFS) had the highest environmental efficiency and the absorption-stabilization subsystem (ASS) had the highest resource efficiency (approximately to 1) of carbon.

  20. Petroleum product refining: plant level analysis of costs and competitiveness. Implications of greenhouse gas emission reductions. Vol 1

    International Nuclear Information System (INIS)

    Kelly, S.J.; Crandall, G.R.; Houlton, G.A.; Kromm, R.B.

    1999-01-01

    Implications on the Canadian refining industry of reducing greenhouse gas (GHG) emissions to meet Canada's Kyoto commitment are assessed, based on a plant-level analysis of costs, benefits and economic and competitive impacts. It was determined on the basis of demand estimates prepared by Natural Resources Canada that refining industry carbon dioxide emissions could be as much a 38 per cent higher than 1990 levels in 2010. Achieving a six per cent reduction below 1990 levels from this business-as-usual case is considered a very difficult target to achieve, unless refinery shutdowns occur. This would require higher imports to meet Canada's petroleum products demand, leaving total carbon dioxide emissions virtually unchanged. A range of options, classified as (1) low capital, operating efficiency projects, (2) medium capital, process/utility optimization projects, (3) high capital, refinery specific projects, and (4) high operating cost GHG projects, were evaluated. Of these four alternatives, the low capital or operating efficiency projects were the only ones judged to have the potential to be economically viable. Energy efficiency projects in these four groups were evaluated under several policy initiatives including accelerated depreciation and a $200 per tonne of carbon tax. Result showed that an accelerated depreciation policy would lower the hurdle rate for refinery investments, and could achieve a four per cent reduction in GHG emissions below 1990 levels, assuming no further shutdown of refinery capacity. The carbon tax was judged to be potentially damaging to the Canadian refinery industry since it would penalize cracking refineries (most Canadian refineries are of this type); it would provide further uncertainty and risk, such that industry might not be able to justify investments to reduce emissions. The overall assessment is that the Canadian refinery industry could not meet the pro-rata Kyoto GHG reduction target through implementation of economically

  1. Reduction of EMC Emissions in Mixed Signal Integrated Circuits with Embedded LIN Driver

    Directory of Open Access Journals (Sweden)

    P. Hartl

    2016-06-01

    Full Text Available This paper describes several methods for reduction of electromagnetic emissions (EME of mixed signal integrated circuits (IC. The focus is on the impact that a LIN bus communication block has on a complex IC which contains analog blocks, noisy digital block, micro-core (µC and several types of memories. It is used in an automotive environment, where EMC emission reduction is one of the key success factors. Several proposed methods for EME reduction are described and implemented on three test chips. These methods include current consumption reduction, internal on-chip decoupling, ground separation and different linear voltage regulator topologies. Measurement results of several fabricated test chips are shown and discussed.

  2. Climate and mortality changes due to reductions in household cooking emissions

    Science.gov (United States)

    Bergman, Tommi; Mielonen, Tero; Arola, Antti; Kokkola, Harri

    2016-04-01

    Household cooking is a significant cause for health and environmental problems in the developing countries. There are more than 3 billion people who use biomass for fuel in cooking stoves in their daily life. These cooking stoves use inadequate ventilation and expose especially women and children to indoor smoke. To reduce problems of the biomass burning, India launched an initiative to provide affordable and clean energy solutions for the poorest households by providing clean next-generation cooking stoves. The improved cooking stoves are expected to improve outdoor air quality and to reduce the climate-active pollutants, thus simultaneously slowing the climate change. Previous research has shown that the emissions of black carbon can be decreased substantially, as much as 90 % by applying better technology in cooking stoves. We have implemented reasonable (50% decrease) and best case (90% decrease) scenarios of the reductions in black and organic carbon due to improved cooking stoves in India into ECHAM-HAMMOZ aerosol-climate model. The global simulations of the scenarios will be used to study how the reductions of emissions in India affect the pollutant concentrations and radiation. The simulated reductions in particulate concentrations will also be used to estimate the decrease in mortality rates. Furthermore, we will study how the emission reductions would affect the global climate and mortality if a similar initiative would be applied in other developing countries.

  3. Potential of greenhouse gas emission reduction in Thai road transport by ethanol bus technology

    International Nuclear Information System (INIS)

    Chollacoop, Nuwong; Saisirirat, Peerawat; Sukkasi, Sittha; Tongroon, Manida; Fukuda, Tuenjai; Fukuda, Atsushi; Nivitchanyong, Siriluck

    2013-01-01

    analysis on ethanol bus introduction was conducted to assess reduction of fossil fuel and greenhouse gas emission by increasing the use of ethanol to achieve ethanol consumption target in 2022. Successful demonstration of ethanol bus operation in Thailand will be briefly mentioned to give confidence for larger project implementation in the future.

  4. Linked Analysis of East Asia Emission Reduction Pathways

    Science.gov (United States)

    Kim, Y.; Woo, J. H.; Bu, C.; Lee, Y.; Kim, J.; Jang, Y.; Park, M.

    2017-12-01

    Air pollution and its impacts over the Northeast Asia are very severe because of the massive pollutant emissions and high population. Korea has been trying to improve air quality with the enhanced environmental legislation. The air quality over Korea, however, does not entirely dependent on its local emissions. Transboundary air pollution from China highly affects Korean atmosphere. The purpose of this research is to understand role of local and transbounday efforts to improve air quality changes over Korea. In this research, we have tried to set up the multiple emission scenario pathways for Korea and China using IIASA's GAINS (Greenhouse gas - Air pollution Interactions aNd Synergies) modeling framework. More up-to-date growth factors and control policy packets were made using regional socio-economic data and control policy information from local governments and international statistics. Four major scenario pathways, 1) Base (Baseline: current legislation), 2) OTB/OTB(On the book/On the way : existing control measure/planed control measure), 3) BOTW_GHG(Beyond on the way : OTW with GHG reduction plan), 4) BOTW_NH3 (OTW with additional NH3 reduction measure) were developed to represent air quality improvement pathways in consideration of both Korean and Chinese efforts. Strict ambient PM2.5 standards from Seoul metropolitan Air quality Improvement Plan(SAIP) seems too enthusiastic without linking air quality control efforts of China. Step-by-step emission controls and following air quality, control cost, health impact from each scenario will be presented at the conference. This subject is supported by Korea Ministry of Environment as "Climate Change Correspondence Program". And This work was supported under the framework of national strategy project on fine particulate matters by Ministry of Science, ICT and Future Planning.

  5. Assessment of the GHG Reduction Potential from Energy Crops Using a Combined LCA and Biogeochemical Process Models: A Review

    Directory of Open Access Journals (Sweden)

    Dong Jiang

    2014-01-01

    Full Text Available The main purpose for developing biofuel is to reduce GHG (greenhouse gas emissions, but the comprehensive environmental impact of such fuels is not clear. Life cycle analysis (LCA, as a complete comprehensive analysis method, has been widely used in bioenergy assessment studies. Great efforts have been directed toward establishing an efficient method for comprehensively estimating the greenhouse gas (GHG emission reduction potential from the large-scale cultivation of energy plants by combining LCA with ecosystem/biogeochemical process models. LCA presents a general framework for evaluating the energy consumption and GHG emission from energy crop planting, yield acquisition, production, product use, and postprocessing. Meanwhile, ecosystem/biogeochemical process models are adopted to simulate the fluxes and storage of energy, water, carbon, and nitrogen in the soil-plant (energy crops soil continuum. Although clear progress has been made in recent years, some problems still exist in current studies and should be addressed. This paper reviews the state-of-the-art method for estimating GHG emission reduction through developing energy crops and introduces in detail a new approach for assessing GHG emission reduction by combining LCA with biogeochemical process models. The main achievements of this study along with the problems in current studies are described and discussed.

  6. Mode selection of China's urban heating and its potential for reducing energy consumption and CO2 emission

    International Nuclear Information System (INIS)

    Chen, Xia; Wang, Li; Tong, Lige; Sun, Shufeng; Yue, Xianfang; Yin, Shaowu; Zheng, Lifang

    2014-01-01

    China's carbon dioxide (CO 2 ) emission ranks the highest in the world. CO 2 emission from urban central heating, which has an average annual growth rate of 10.3%, is responsible for 4.4% of China's total CO 2 emission. The current policy for improving urban central heating focuses on replacing coal with natural gas. This paper analyzes the existing situation and problems pertaining to urban heating, and evaluates the potential for reducing energy consumption and CO 2 emission by heat pump heating. The results show that the current policy of replacing coal with natural gas for urban central heating decreases energy consumption and CO 2 emission by 16.6% and 63.5%, respectively. On the other hand, replacing coal-based urban central heating with heat pump heating is capable of decreasing energy consumption and CO 2 emission by 57.6% and 81.4%, respectively. Replacing both urban central and decentralized heating with heat pump heating can lead to 67.7% and 85.8% reduction in energy consumption and CO 2 emission, respectively. The decreases in CO 2 emission will account for 24.5% of China's target to reduce total CO 2 emission by 2020. - Highlights: • Existing situation and problems of urban heating in China. • Feasibility of heat pump heating in China. • Potential of energy saving and emission reduction for heat pump heating. • China should adjust urban heating strategy. • Replacing urban central heating and decentralized heating with heat pump heating

  7. Cost-Effectiveness of Emission Reduction for the Indonesian Coal-Fired Power Plants

    NARCIS (Netherlands)

    Handayani, Kamia; Krozer, Yoram

    2014-01-01

    This paper presents the result of research on the cost-effectiveness of emission reduction in the selected coal-fired power plants (CFPPs) in Indonesia. The background of this research is the trend of more stringent environmental regulation regarding air emission from coal-fired power plants (CFPPs)

  8. Background information on a multimedia nitrogen emission reduction strategy; Hintergrundpapier zu einer multimedialen Stickstoffemissionsminderungsstrategie

    Energy Technology Data Exchange (ETDEWEB)

    Geupel; Jering; Frey (and others)

    2009-04-15

    The background information report on a multimedia nitrogen reduction strategy covers the following chapters: 1. Introduction: the nitrogen cascade and the anthropogenic influence, environmental impact of increased nitrogen emissions and effects on human health. 2. Sources and balancing of anthropogenic nitrogen emissions in Germany. 3. Environmental quality targets, activity goals of environmental measures and instruments of an integrated nitrogen reduction strategy. 4. Conclusions and perspectives. The attachments include emission sources, nitrogen release and nitrogen transport in Germany; catalogue of measures and instruments according the criteria efficiency and cost-efficacy.

  9. NOx reduction and NO2 emission characteristics in rich-lean combustion of hydrogen

    OpenAIRE

    Shudo, Toshio; Omori, Kento; Hiyama, Osamu

    2008-01-01

    Hydrogen is a clean alternative to conventional hydrocarbon fuels, but it is very important to reduce the nitrogen oxides (NOx) emissions generated by hydrogen combustion. The rich-lean combustion or staged combustion is known to reduce NOx emissions from continuous combustion burners such as gas turbines and boilers, and NOx reduction effects have been demonstrated for hydrocarbon fuels. The authors applied rich-lean combustion to a hydrogen gas turbine and showed its NOx reduction effect in...

  10. The relative magnitude of the impacts and effects of GHG-related emission reductions

    International Nuclear Information System (INIS)

    Chiotti, Q.; Urquizo, N.

    2000-01-01

    A preliminary assessment of the current knowledge related to the co-benefits associated with climate change mitigation was provided in this document. One of the benefits of the reduction of greenhouse gas emissions is the reduction of other pollutants like sulphur dioxide, nitrogen oxides, carbon monoxide, volatile organic compounds, particulate matter, ground-level ozone, heavy metals and other toxic pollutants. Since these pollutants have an effect on acid deposition, ozone depletion and air quality, the environment, social welfare and human health, this paper provided an initial outline of the complex processes, interactions and uncertainties associated with this issue. Fossil fuels represent the major source of greenhouse gas (GHG) emissions in Canada. The reduction of emissions of GHG could have an impact on the Long Range Transport of air toxic substances, would help increase oxygen concentrations in the Northern Hemisphere, and lead to less carbon monoxide being released in the atmosphere, among others effects. Reductions of GHG emissions would also have an impact on ecosystems by reducing ground-level ozone concentrations. There would be less acid deposition and more dissolved organic carbon, allowing less ultraviolet-B penetration in aquatic ecosystems. In the case of human health, improved air quality impacts on the avoidance of premature mortality and reduced morbidity. Numerous other co-benefits were listed and discussed in this document. The first section stated the purpose and objectives. In section 2, that authors described the science and policy context and discussed building an analytical framework in section 3. The impact of GHG emission reductions on atmospheric pollution and ecosystems was dealt with in section 4 and section 5 was devoted to providing an assessment of the relative magnitude of effects. In section 6, the significance of scope was reviewed, and the authors concluded with section 7 in which they discussed the next steps: phase II

  11. Markets for renewable energy and pollution emissions: Environmental claims, emission-reduction accounting, and product decoupling

    International Nuclear Information System (INIS)

    Moore, Michael R.; Lewis, Geoffrey McD.; Cepela, Daniel J.

    2010-01-01

    Green electricity generation can provide an indirect route to cleaner air: by displacing generation from fossil fuels, green electricity can reduce emissions of CO 2 and conventional air pollutants. Several types of voluntary markets have emerged in the United States to take advantage of this relationship, including green electricity programs, carbon offsets, and renewable energy certificates. At the same time, regulators are favoring cap-and-trade mechanisms for regulating emissions. This paper describes the appropriate framing of environmental claims for green electricity products. We apply an accounting framework for evaluating claims made for capped pollutants, with entries for emissions, avoided emissions due to green electricity, and unused emission permits. This framework is applied in case studies of two major electric utilities that operate with green electricity programs and capped pollutants. The cases demonstrate that the relative magnitude of 'unused permits' and 'emissions avoided' is a key relationship for evaluating an emissions reduction claim. Lastly, we consider the evolution of the green electricity marketplace given the reliance on cap-and-trade. In this setting, pollution-emission products could be decoupled from one another and from the various green electricity products. Several positive consequences could transpire, including better transparency of products, lower certification costs, and more product choices.

  12. Markets for renewable energy and pollution emissions. Environmental claims, emission-reduction accounting, and product decoupling

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Michael R.; Cepela, Daniel J. [University of Michigan, MI (United States); Lewis, Geoffrey McD. [University of Waterloo, ON (Canada)

    2010-10-15

    Green electricity generation can provide an indirect route to cleaner air: by displacing generation from fossil fuels, green electricity can reduce emissions of CO{sub 2} and conventional air pollutants. Several types of voluntary markets have emerged in the United States to take advantage of this relationship, including green electricity programs, carbon offsets, and renewable energy certificates. At the same time, regulators are favoring cap-and-trade mechanisms for regulating emissions. This paper describes the appropriate framing of environmental claims for green electricity products. We apply an accounting framework for evaluating claims made for capped pollutants, with entries for emissions, avoided emissions due to green electricity, and unused emission permits. This framework is applied in case studies of two major electric utilities that operate with green electricity programs and capped pollutants. The cases demonstrate that the relative magnitude of 'unused permits' and 'emissions avoided' is a key relationship for evaluating an emissions reduction claim. Lastly, we consider the evolution of the green electricity marketplace given the reliance on cap-and-trade. In this setting, pollution-emission products could be decoupled from one another and from the various green electricity products. Several positive consequences could transpire, including better transparency of products, lower certification costs, and more product choices. (author)

  13. Markets for renewable energy and pollution emissions: Environmental claims, emission-reduction accounting, and product decoupling

    Energy Technology Data Exchange (ETDEWEB)

    Moore, Michael R., E-mail: micmoore@umich.ed [University of Michigan, MI (United States); Lewis, Geoffrey McD. [University of Waterloo, ON (Canada); Cepela, Daniel J. [University of Michigan, MI (United States)

    2010-10-15

    Green electricity generation can provide an indirect route to cleaner air: by displacing generation from fossil fuels, green electricity can reduce emissions of CO{sub 2} and conventional air pollutants. Several types of voluntary markets have emerged in the United States to take advantage of this relationship, including green electricity programs, carbon offsets, and renewable energy certificates. At the same time, regulators are favoring cap-and-trade mechanisms for regulating emissions. This paper describes the appropriate framing of environmental claims for green electricity products. We apply an accounting framework for evaluating claims made for capped pollutants, with entries for emissions, avoided emissions due to green electricity, and unused emission permits. This framework is applied in case studies of two major electric utilities that operate with green electricity programs and capped pollutants. The cases demonstrate that the relative magnitude of 'unused permits' and 'emissions avoided' is a key relationship for evaluating an emissions reduction claim. Lastly, we consider the evolution of the green electricity marketplace given the reliance on cap-and-trade. In this setting, pollution-emission products could be decoupled from one another and from the various green electricity products. Several positive consequences could transpire, including better transparency of products, lower certification costs, and more product choices.

  14. Optimal production resource reallocation for CO2 emissions reduction in manufacturing sectors

    OpenAIRE

    Fujii, Hidemichi; Managi, Shunsuke

    2015-01-01

    To mitigate the effects of climate change, countries worldwide are advancing technologies to reduce greenhouse gas emissions. This paper proposes and measures optimal production resource reallocation using data envelopment analysis. This research attempts to clarify the effect of optimal production resource reallocation on CO2 emissions reduction, focusing on regional and industrial characteristics. We use finance, energy, and CO2 emissions data from 13 industrial sectors in 39 countries from...

  15. Deliberating emission reduction options

    Energy Technology Data Exchange (ETDEWEB)

    Dowd, A.M.; Rodriguez, M.; Jeanneret, T. [Commonwealth Scientific and Industrial Research Organisation CSIRO, 37 Graham Rd, Highett VIC 3190 (Australia); De Best-Waldhober, M.; Straver, K.; Mastop, J.; Paukovic, M. [Energy research Centre of the Netherlands ECN, Policy Studies, Amsterdam (Netherlands)

    2012-06-15

    For more than 20 years there has been a concerted international effort toward addressing climate change. International conventions, such as the United Nations Foreign Convention on Climate Change (UNFCCC; ratified in 1994), have been established by committed nations seeking to address global climate change through the reduction of greenhouse gases emitted into the Earth's atmosphere (Global CCS Institute, 2011). Long recognised as the most crucial of the greenhouse gases to impact global warming, the majority of carbon dioxide's anthropogenic global emissions are directly related to fuel combustion of which both Australia and the Netherlands' energy production is significantly reliant. Both these nations will need to consider many opinions and make hard decisions if alternative energy options are to be implemented at the scale that is required to meet international emission targets. The decisions that are required not only need to consider the many options available but also their consequences. Along with politicians, policy developers and industry, the general public also need to be active participants in deciding which energy options, and their subsequent consequences, are acceptable for implementation at the national level. Access to balanced and factual information is essential in establishing informed opinions on the many policy options available. Past research has used several methods to measure public perceptions and opinions yet for complex issues, such as emission reduction, some of these methods have shown to be problematic. For example, semi structured interviews can provide data that is flexible and context rich yet is does also come with the limitations such as it seldom provides a practical assessment that can be utilised from researcher to researcher, across disciplines and public participation techniques. Surveys on the other hand usually address these limitations but surveys that do not encourage comparison of information or ask

  16. Deliberating emission reduction options

    Energy Technology Data Exchange (ETDEWEB)

    Dowd, A. M.; Rodriguez, M.; Jeanneret, T. [Commonwealth Scientific and Industrial Research Organisation CSIRO, 37 Graham Rd, Highett VIC 3190 (Australia); De Best-Waldhober, M.; Straver, K.; Mastop, J.; Paukovic, M. [Energy research Centre of the Netherlands ECN, Policy Studies, Amsterdam (Netherlands)

    2012-06-15

    For more than 20 years there has been a concerted international effort toward addressing climate change. International conventions, such as the United Nations Foreign Convention on Climate Change (UNFCCC; ratified in 1994), have been established by committed nations seeking to address global climate change through the reduction of greenhouse gases emitted into the Earth's atmosphere (Global CCS Institute, 2011). Long recognised as the most crucial of the greenhouse gases to impact global warming, the majority of carbon dioxide's anthropogenic global emissions are directly related to fuel combustion of which both Australia and the Netherlands' energy production is significantly reliant. Both these nations will need to consider many opinions and make hard decisions if alternative energy options are to be implemented at the scale that is required to meet international emission targets. The decisions that are required not only need to consider the many options available but also their consequences. Along with politicians, policy developers and industry, the general public also need to be active participants in deciding which energy options, and their subsequent consequences, are acceptable for implementation at the national level. Access to balanced and factual information is essential in establishing informed opinions on the many policy options available. Past research has used several methods to measure public perceptions and opinions yet for complex issues, such as emission reduction, some of these methods have shown to be problematic. For example, semi structured interviews can provide data that is flexible and context rich yet is does also come with the limitations such as it seldom provides a practical assessment that can be utilised from researcher to researcher, across disciplines and public participation techniques. Surveys on the other hand usually address these limitations but surveys that do not encourage comparison of information or ask participants to

  17. CO{sub 2} emissions reduction in the transport sector in Germany. Possible measures and their reduction potential. A status report by the Federal Environment Agency. Summary; CO{sub 2}-Emissionsminderung im Verkehr in Deutschland. Moegliche Massnahmen und ihre Minderungspotenziale. Ein Sachstandsbericht des Umweltbundesamtes

    Energy Technology Data Exchange (ETDEWEB)

    Rodt, Stefan; Georgi, Birgit; Huckestein, Burkhard; Moench, Lars; Herbener, Reinhard; Jahn, Helge; Koppe, Katharina; Lindmaier, Joern

    2010-03-15

    The Federal Environment Agency is therefore proposing a multitude of measures which have the potential to significantly reduce the CO{sub 2} emissions caused by transport and to thus achieve the German Federal Government's climate protection objectives. The measures target both freight and passenger transport and cover all transport modes (heavy goods vehicles, passenger cars, inland waterways, rail, air, pedestrians and bicycles). The Federal Environment Agency suggests a range of complementary measures in the following fields: - Traffic avoidance: Influencing / reducing transport demand and shortening distances. - Modal shift: Shifting transport to more environmentally friendly modes. - Optimising transport: Better utilisation of existing transport capacities. - Economic measures and - direct emission reduction on vehicles. In line with this, the measures and instruments proposed focus on the following areas: - Traffic-reducing through town planning and transport planning - Promoting environmentally friendly transport modes - Economic measures - Measures to improve vehicle and fleet efficiency - Consumer information and driving behaviour in road traffic The table below provides an overview of the measures and their reduction potential for the years 2020 and 2030. The calculated CO{sub 2} savings result from the divergence from the trend scenario which was calculated using the ''TREMOD'' model and is based on measures for the transport sector which have already been adopted. The potentials from the various individual measures proposed by the Federal Environment Agency cannot simply be added up, since the measures may be mutually reinforcing or reducing each others effect. For instance, if fewer heavy goods vehicles are on the road because of a switch to rail, this reduces the absolute reduction that could be achieved by the HGV fleet through e.g. the use of low-friction oils and low-rolling-resistance tyres. (orig.)

  18. CO{sub 2} emissions reduction in the transport sector in Germany. Possible measures and their reduction potential. A status report by the Federal Environment Agency. Summary; CO{sub 2}-Emissionsminderung im Verkehr in Deutschland. Moegliche Massnahmen und ihre Minderungspotenziale. Ein Sachstandsbericht des Umweltbundesamtes

    Energy Technology Data Exchange (ETDEWEB)

    Rodt, Stefan; Georgi, Birgit; Huckestein, Burkhard; Moench, Lars; Herbener, Reinhard; Jahn, Helge; Koppe, Katharina; Lindmaier, Joern

    2010-03-15

    The Federal Environment Agency is therefore proposing a multitude of measures which have the potential to significantly reduce the CO{sub 2} emissions caused by transport and to thus achieve the German Federal Government's climate protection objectives. The measures target both freight and passenger transport and cover all transport modes (heavy goods vehicles, passenger cars, inland waterways, rail, air, pedestrians and bicycles). The Federal Environment Agency suggests a range of complementary measures in the following fields: - Traffic avoidance: Influencing / reducing transport demand and shortening distances. - Modal shift: Shifting transport to more environmentally friendly modes. - Optimising transport: Better utilisation of existing transport capacities. - Economic measures and - direct emission reduction on vehicles. In line with this, the measures and instruments proposed focus on the following areas: - Traffic-reducing through town planning and transport planning - Promoting environmentally friendly transport modes - Economic measures - Measures to improve vehicle and fleet efficiency - Consumer information and driving behaviour in road traffic The table below provides an overview of the measures and their reduction potential for the years 2020 and 2030. The calculated CO{sub 2} savings result from the divergence from the trend scenario which was calculated using the ''TREMOD'' model and is based on measures for the transport sector which have already been adopted. The potentials from the various individual measures proposed by the Federal Environment Agency cannot simply be added up, since the measures may be mutually reinforcing or reducing each others effect. For instance, if fewer heavy goods vehicles are on the road because of a switch to rail, this reduces the absolute reduction that could be achieved by the HGV fleet through e.g. the use of low-friction oils and low-rolling-resistance tyres. (orig.)

  19. Reductions in greenhouse gas emissions and oil use by DME (di-methyl ether) and FT (Fischer-Tropsch) diesel production in chemical pulp mills

    International Nuclear Information System (INIS)

    Joelsson, Jonas M.; Gustavsson, Leif

    2012-01-01

    Using energy systems analysis, we examine the potential to reduce CO 2 emissions and oil use by integrating motor biofuel production with pulp mills. BLG-DME (black liquor gasification with di-methyl ether production) is compared with solid biomass gasification with BIG-FT (solid biomass gasification with Fischer-Tropsch fuel production). The studied systems are expanded with stand-alone production of biomass-based electricity and motor fuel so that they yield the same functional unit in terms of motor fuel and electricity as well as pulp or paper product, in order to facilitate comparison. More motor biofuel can be produced in integration with the studied mills with BLG-DME than with BIG-FT because the black liquor flow is large compared with other fuel streams in the mill and the integration potential for BIG-FT is limited by the mill’s heat demand. When both systems are required to produce the same functional unit, the BLG-DME system achieves higher system efficiency and larger reductions in CO 2 emissions and oil use per unit of biomass consumed. In general, integration of motor biofuel production with a pulp mill is more efficient than stand-alone motor biofuel production. Larger reductions in CO 2 emissions or oil use can, however, be achieved if biomass replaces coal or oil in stationary applications. -- Highlights: ► CO 2 emission and oil use reductions quantified for pulp mill-based biorefineries. ► Black liquor gasification gives larger reductions than solid biomass gasification. ► Lower mill steam demand increases the black liquor gasification advantage. ► Biomass directly replacing coal or oil in stationary plants gives larger reductions.

  20. Ways for carbon low emission in Brazil

    International Nuclear Information System (INIS)

    2009-01-01

    This report focused the challenge presented for contribution of the reduction process of carbon emission. This document identifies the reduction of deforesting and the emission from the cattle rising and agricultural activities as the main reduction opportunities, representing 85 % of the country potential

  1. A Novel Four-Dimensional Energy-Saving and Emission-Reduction System and Its Linear Feedback Control

    Directory of Open Access Journals (Sweden)

    Minggang Wang

    2012-01-01

    Full Text Available This paper reports a new four-dimensional energy-saving and emission-reduction chaotic system. The system is obtained in accordance with the complicated relationship between energy saving and emission reduction, carbon emission, economic growth, and new energy development. The dynamics behavior of the system will be analyzed by means of Lyapunov exponents and equilibrium points. Linear feedback control methods are used to suppress chaos to unstable equilibrium. Numerical simulations are presented to show these results.

  2. Reduction in global warming due to fuel economy improvements and emissions control of criteria pollutants: New US light-duty vehicles (1968--1991)

    Energy Technology Data Exchange (ETDEWEB)

    Pitstick, M.E.; Santini, D.J. [Argonne National Lab., IL (United States); Chauhan, H. [Delaware Univ., Newark, DE (United States). Dept. of Civil Engineering

    1992-08-01

    This paper explores the impact of US emission controls and fuel economy improvements on the global warming potential (GWP) of new light-duty vehicles. Fuel economy improvements have reduced the GWP of both passenger cars and light-duty trucks by lowering the per mile emissions of carbon dioxide (CO{sub 2}). Further GWP reductions have been achieved by emission standards for criteria pollutants: carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NO{sub x}). The GWP of a criteria pollutant was calculated by multiplying the emission rate by a relative global warming factor to obtain a CO{sub 2} equivalent emission rate. Both CO{sub 2} and criteria pollutant emission rates per vehicle have decreased substantially for new light-duty vehicles over the period from 1968 to 1991. Over that period, the GWP from CO{sub 2} was reduced by almost 50% in new vehicles by improving fuel economy. In that same time period, the GWP from criteria pollutants from new vehicles was reduced with emission controls by from 80% to 90% depending on the global warming time frame of interest. Consequently, total reductions in the GWP of new passenger cars and light-duty trucks have been on the order of 55 to 75 percent compared to precontrol (before 1968) new vehicles. However, the reduction in GWP caused by emission control of criteria pollutants has been larger than the reduction caused by improved fuel economy (i.e., reduced CO{sub 2}). The contribution of criteria pollutants to the GWP of precontrol new vehicles was substantial, but their contribution has been reduced significantly due to US emission controls. As a result, the contribution of criteria pollutants to global warming is now much less than the contribution of CO{sub 2} from fuel consumption.

  3. Reduction in global warming due to fuel economy improvements and emissions control of criteria pollutants: New US light-duty vehicles (1968--1991)

    Energy Technology Data Exchange (ETDEWEB)

    Pitstick, M.E.; Santini, D.J. (Argonne National Lab., IL (United States)); Chauhan, H. (Delaware Univ., Newark, DE (United States). Dept. of Civil Engineering)

    1992-01-01

    This paper explores the impact of US emission controls and fuel economy improvements on the global warming potential (GWP) of new light-duty vehicles. Fuel economy improvements have reduced the GWP of both passenger cars and light-duty trucks by lowering the per mile emissions of carbon dioxide (CO{sub 2}). Further GWP reductions have been achieved by emission standards for criteria pollutants: carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NO{sub x}). The GWP of a criteria pollutant was calculated by multiplying the emission rate by a relative global warming factor to obtain a CO{sub 2} equivalent emission rate. Both CO{sub 2} and criteria pollutant emission rates per vehicle have decreased substantially for new light-duty vehicles over the period from 1968 to 1991. Over that period, the GWP from CO{sub 2} was reduced by almost 50% in new vehicles by improving fuel economy. In that same time period, the GWP from criteria pollutants from new vehicles was reduced with emission controls by from 80% to 90% depending on the global warming time frame of interest. Consequently, total reductions in the GWP of new passenger cars and light-duty trucks have been on the order of 55 to 75 percent compared to precontrol (before 1968) new vehicles. However, the reduction in GWP caused by emission control of criteria pollutants has been larger than the reduction caused by improved fuel economy (i.e., reduced CO{sub 2}). The contribution of criteria pollutants to the GWP of precontrol new vehicles was substantial, but their contribution has been reduced significantly due to US emission controls. As a result, the contribution of criteria pollutants to global warming is now much less than the contribution of CO{sub 2} from fuel consumption.

  4. Reduction in global warming due to fuel economy improvements and emissions control of criteria pollutants: New US light-duty vehicles (1968--1991)

    International Nuclear Information System (INIS)

    Pitstick, M.E.; Santini, D.J.; Chauhan, H.

    1992-01-01

    This paper explores the impact of US emission controls and fuel economy improvements on the global warming potential (GWP) of new light-duty vehicles. Fuel economy improvements have reduced the GWP of both passenger cars and light-duty trucks by lowering the per mile emissions of carbon dioxide (CO 2 ). Further GWP reductions have been achieved by emission standards for criteria pollutants: carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides (NO x ). The GWP of a criteria pollutant was calculated by multiplying the emission rate by a relative global warming factor to obtain a CO 2 equivalent emission rate. Both CO 2 and criteria pollutant emission rates per vehicle have decreased substantially for new light-duty vehicles over the period from 1968 to 1991. Over that period, the GWP from CO 2 was reduced by almost 50% in new vehicles by improving fuel economy. In that same time period, the GWP from criteria pollutants from new vehicles was reduced with emission controls by from 80% to 90% depending on the global warming time frame of interest. Consequently, total reductions in the GWP of new passenger cars and light-duty trucks have been on the order of 55 to 75 percent compared to precontrol (before 1968) new vehicles. However, the reduction in GWP caused by emission control of criteria pollutants has been larger than the reduction caused by improved fuel economy (i.e., reduced CO 2 ). The contribution of criteria pollutants to the GWP of precontrol new vehicles was substantial, but their contribution has been reduced significantly due to US emission controls. As a result, the contribution of criteria pollutants to global warming is now much less than the contribution of CO 2 from fuel consumption

  5. Strategic research on CO{sub 2} emission reduction for China. Application of MARKAL to China energy system

    Energy Technology Data Exchange (ETDEWEB)

    Yongping, Wang [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1995-09-01

    MARKAL was applied to the energy system for analyzing the CO{sub 2} emission reduction in China over the time period from 1990 to 2050. First the Chinese Reference Energy System (CRES) was established based on the framework of MARKAL model. The following conclusions can be drawn from this study. When shifting from scenario LH (low useful energy demand and high import fuel prices) to HL (high demand and low prices), another 33 EJ of primary energy will be consumed and another 2.31 billion tons of CO{sub 2} will be emitted in 2050. Detailed analyses on the disaggregation of CO{sub 2} emissions by Kaya Formula show. The energy intensity (primary energy/GDP) decreases much faster in scenario HL, but the higher growth rate of GDP per capita is the overwhelming factor that results in higher CO{sub 2} emission per capita in the baseline case of scenario HL in comparison with LH. When the carbon taxes are imposed on CO{sub 2} emissions, the residential sector will make the biggest contribution to CO{sub 2} emission abatement from a long-term point of view. However, it`s difficult to stabilize CO{sub 2} emission per capita before 2030 in both scenarios even with heavy carbon taxes. When nuclear moratorium occurs, more 560 million tons of CO{sub 2} will be emitted to the atmosphere in 2050 under the same CO{sub 2} tax regime. From the analysis of value flow, CO{sub 2} emission reduction depends largely on new or advanced technologies particularly in the field of electricity generation. The competent technologies switch to those CO{sub 2} less-emitting technologies when surcharging CO{sub 2} emissions. Nuclear power shows significant potential in saving fossil energy resources and reducing CO{sub 2} emissions. (J.P.N.).

  6. Economic analysis of the reduction of dehydrator emissions in the natural gas industry

    International Nuclear Information System (INIS)

    Chalifoux, C.

    1999-01-01

    Under the Canadian Environmental Protection Act benzene has been designated as toxic, and after gasoline combustion, the natural gas extraction industry is the largest source of benzene emissions to the environment. The study's objective is to present a profile of the natural gas industry and to analyze the costs to the private sector of complying with the various benzene reduction targets. Also outlined is a profile of the natural gas extraction industry. A description is included of the method used to extrapolate the results obtained from the sample of 370 sites to the industry as a whole. Two scenarios studied are described in section four including: (1) scenario one in which the environmental requirements would have to be applied across-the-board to all emitting sites, which would have to comply with maximum benzene reductions, and (2) scenario two in which the environmental requirements would only be applied to high-emission sites, which would have to comply with specific requirements. A compilation is made in the fifth section for each scenario of the cost to the industry and the benzene emission reductions for each scenario for the sample of 370 sites to the industry as a whole. The aim of developing the two scenarios used to analyze various benzene emissions reduction levels at the sample of 370 sites was to determine: capital costs required, additional annual costs as additional annual operating costs plus annualized capital costs, number of sites affected, and total benzene reductions expressed in tonnes per year. 10 tabs

  7. EMISSION REDUCTION TECHNOLOGIES FOR MARINE DIESEL ENGINES: A SYSTEM DYNAMICS APPROACH

    OpenAIRE

    Pamık, Murat; Nuran, Mustafa; Cerit, A.Güldem

    2015-01-01

    International Maritime Organization (IMO) adopts international marine safety regulations. The regulations incorporated under Annex VI of IMO's International Convention for the Prevention of Pollution from Ships (MARPOL) entered into force in May 2005. These regulations define the limits for sulphur oxides (SOx) and nitrogen oxides (NOx) emissions from ship exhausts.In this context, emission reduction technologies needed for enviroment protection and satisfy to sustainabletransportation. ...

  8. Carbon emissions from Southeast Asian peatlands will increase despite emission-reduction schemes.

    Science.gov (United States)

    Wijedasa, Lahiru S; Sloan, Sean; Page, Susan E; Clements, Gopalasamy R; Lupascu, Massimo; Evans, Theodore A

    2018-06-01

    Carbon emissions from drained peatlands converted to agriculture in Southeast Asia (i.e. Peninsular Malaysia, Sumatra and Borneo) are globally significant and increasing. Here, we map the growth of Southeast Asian peatland agriculture and estimate CO 2 emissions due to peat drainage in relation to official land-use plans with a focus on the Reducing Emissions from Deforestation and Degradation (REDD+) related Indonesian moratorium on granting new concession licenses for industrial agriculture and logging. We find that, prior to 2010, 35% of Southeast Asian peatlands had been converted to agriculture, principally by smallholder farmers (15% of original peat extent) and industrial oil palm plantations (14%). These conversions resulted in 1.46-6.43 GtCO 2 of emissions between 1990 and 2010. This legacy of historical clearances on deep peat areas will contribute 51% (4.43-11.45 GtCO 2 ) of projected peatland CO 2 emissions over the period 2010-2130. In Indonesia, which hosts most of the region's peatland and where concession maps are publicly available, 70% of peatland conversion to agriculture occurred outside of known concessions for industrial plantation development, with smallholders accounting for 60% and industrial oil palm accounting for 34%. Of the remaining Indonesian peatswamp forest (PSF), 45% is not protected, and its conversion would amount to CO 2 emissions equivalent to 0.7-2.3% (5.14-14.93 Gt) of global fossil fuel and cement emissions released between 1990-2010. Of the peatland extent included in the moratorium, 48% was no longer forested, and of the PSF included 40-48% is likely to be affected by drainage impacts from agricultural areas and will emit CO 2 over time. We suggest that recent legislation and policy in Indonesia could provide a means of meaningful emission reductions if focused on revised land-use planning, PSF conservation both inside and outside agricultural concessions, and the development of agricultural practices based on

  9. Impact of biogenic emission uncertainties on the simulated response of ozone and fine particulate matter to anthropogenic emission reductions.

    Science.gov (United States)

    Hogrefe, Christian; Isukapalli, Sastry S; Tang, Xiaogang; Georgopoulos, Panos G; He, Shan; Zalewsky, Eric E; Hao, Winston; Ku, Jia-Yeong; Key, Tonalee; Sistla, Gopal

    2011-01-01

    The role of emissions of volatile organic compounds and nitric oxide from biogenic sources is becoming increasingly important in regulatory air quality modeling as levels of anthropogenic emissions continue to decrease and stricter health-based air quality standards are being adopted. However, considerable uncertainties still exist in the current estimation methodologies for biogenic emissions. The impact of these uncertainties on ozone and fine particulate matter (PM2.5) levels for the eastern United States was studied, focusing on biogenic emissions estimates from two commonly used biogenic emission models, the Model of Emissions of Gases and Aerosols from Nature (MEGAN) and the Biogenic Emissions Inventory System (BEIS). Photochemical grid modeling simulations were performed for two scenarios: one reflecting present day conditions and the other reflecting a hypothetical future year with reductions in emissions of anthropogenic oxides of nitrogen (NOx). For ozone, the use of MEGAN emissions resulted in a higher ozone response to hypothetical anthropogenic NOx emission reductions compared with BEIS. Applying the current U.S. Environmental Protection Agency guidance on regulatory air quality modeling in conjunction with typical maximum ozone concentrations, the differences in estimated future year ozone design values (DVF) stemming from differences in biogenic emissions estimates were on the order of 4 parts per billion (ppb), corresponding to approximately 5% of the daily maximum 8-hr ozone National Ambient Air Quality Standard (NAAQS) of 75 ppb. For PM2.5, the differences were 0.1-0.25 microg/m3 in the summer total organic mass component of DVFs, corresponding to approximately 1-2% of the value of the annual PM2.5 NAAQS of 15 microg/m3. Spatial variations in the ozone and PM2.5 differences also reveal that the impacts of different biogenic emission estimates on ozone and PM2.5 levels are dependent on ambient levels of anthropogenic emissions.

  10. Mitigation of emissions from wildfires in Australia: potential for use of managed prescribed fire in eucalypt dominated vegetation, present and future. (Invited)

    Science.gov (United States)

    Bradstock, R.; Price, O.; Williams, D.; Hutley, L.

    2010-12-01

    Species of Eucalyptus and other closely related genera dominate woodlands and forests in the moist regions of tropical and temperate Australia. Respectively, these savanna woodlands and open forests are highly fire prone, though fire regimes are fundamentally different due to inherent influences of weather, fuels, ignitions and terrain. Fuel reduction via prescribed burning is commonly used in both savanna woodlands and temperate, open forests with the intention of reducing the incidence, extent and intensity of wildfires and subsequent risk to human and environmental assets. The prospect of mitigation of greenhouse gas emissions from wildfires provides further impetus for extensive use of prescribed fire. This potential is dependent on a number of key factors, namely the efficacy of this fuel reduction technique and the relative difference in the intensity of prescribed fires and wildfires. We present a conceptual model of the potential for prescribed fire to mitigate emissions based on these key factors. Prescribed burning requires an outlay of emissions in return for a saving through a reduction in area burned and intensity of subsequent wildfires. If the reduction in area burned by wildfires, achieved through prescribed burning, is relatively small then the reduction in intensity of wildfires must be relatively large in order to achieve a net reduction in emissions. This is not the case if prescribed burning has a strong effect in reducing the size of wildfires. Contemporary data indicate that the effect of prescribed burning in reducing area burned by wildfires is high in savanna woodlands but relatively low in forests. Corresponding potential for mitigation of emissions is therefore high and low respectively. We tested this prediction for forests by estimating fire intensity and fuel consumption using a range of fuel accumulation models for south eastern Australian forests. The results indicate that at the level of effectiveness of prescribed fire achieved

  11. Potential mercury emissions from fluorescent lamps production and obsolescence in mainland China.

    Science.gov (United States)

    Tan, Quanyin; Li, Jinhui

    2016-01-01

    The use of fluorescent lamps has expanded rapidly all over the world in recent years, because of their energy-saving capability. Consequently, however, mercury emissions from production, breakage, and discard of the lamps are drawing increasing concern from the public. This article focuses on evaluating the amount of mercury used for fluorescent lamp production, as well as the potential mercury emissions during production and breakage, in mainland China. It is expected to provide a comprehensive understanding about the risks present in the mercury from fluorescent lamps, and to know about the impacts of the policies on fluorescent lamps after their implementation. It is estimated that, in 2020, mercury consumption will be about 11.30-15.69 tonnes, a significant reduction of 34.9%-37.4% from that used in 2013, owing to improvement in mercury dosing dosage technology and tighter limitations on mercury content in fluorescent lamps. With these improvements, the amount of mercury remaining in fluorescent lamps and released during production is estimated to be 10.71-14.86 and 0.59-0.83 tonnes, respectively; the mercury released from waste fluorescent lamps is estimated to be about 5.37-7.59 tonnes. Also, a significant reduction to the mercury emission can be expected when a collection and treatment system is well established and conducted in the future. © The Author(s) 2015.

  12. Energy market reform and greenhouse gas emission reductions

    International Nuclear Information System (INIS)

    Anon.

    1999-01-01

    The report reviews micro-economic reform in the energy market and measures the impact that energy market reform is expected to have on greenhouse gas outcomes. It indicates that reform in the electricity and gas industries is delivering what was promised, an efficient market with lower energy prices and, over the longer term, will deliver a gradually reducing rate of greenhouse gas emissions per unit of energy produced. It also recognises that energy market reform has removed some barriers to the entry of less greenhouse gas intense fuels. These trends will result in reduced greenhouse gas intensity in the supply of energy and significant reductions in the growth in greenhouse gas emissions compared to what may have been expected without the reforms

  13. Quantification of long term emission potential from landfills

    NARCIS (Netherlands)

    Heimovaara, T.J.

    2011-01-01

    Novel approaches for the after-care of Municipal Solid Waste (MSW) landfills are based on technological measures to reduce the long term emission potential in a short time period. Biological degradation in landfills is a means to significantly reduce the long term emission potential. Leachate

  14. Fast Plasma Potential Measurements Using an Emissive Probe

    Science.gov (United States)

    Ready, Amanda; Clark, Michael; Endrizzi, Douglass; Forest, Cary; Peterson, Ethan

    2017-10-01

    A heated emissive probe was developed for making direct plasma potential (Vp) measurements in rapidly fluctuating plasmas. Previous experiments on the Big Red Ball (BRB) were hindered by sudden potential drops, making Langmuir measurements of the plasma potential difficult. DC heating of a tungsten filament to emission allowed for fast (4 MHz) floating potential measurements that closely matched Vp. Two BRB experiments currently use the emissive probe. The investigation of unmagnetized, collisionless shocks used plasma potential measurements to study the sub-structure of strong plasma shocks. A separate investigation of emulated magnetospheres in laboratory plasmas used the plasma potential to map the equilibria and instabilities in the electric field of such structures. Results showing electric field measurements and comparison with cold Langmuir measurements will be presented. Future plans for probe modifications and applications to other experiments on the BRB will also be shown.

  15. Greenhouse gas emissions from aviation and marine transportation : mitigation potential and policies

    Science.gov (United States)

    2009-12-01

    This paper provides an overview of greenhouse gas (GHG) emissions : from aviation and marine transportation and the various mitigation options to reduce these emissions. Reducing global emissions by 50 to 80 percent below 1990 levels by 2050reduct...

  16. A study of the rebound effect on China's current energy conservation and emissions reduction: Measures and policy choices

    International Nuclear Information System (INIS)

    Lin, Boqiang; Yang, Fang; Liu, Xia

    2013-01-01

    Energy efficiency improvement leads to a reduction in the real cost of energy services per unit, thus bringing about an increase in the demand for energy services. Therefore, the potential energy savings and emission reduction from efficiency improvements might be offset, which is known as “the rebound effect”. This study disaggregates the effect into the direct and indirect effects based on the Slutsky Equation and finds that the rebound effect of Chinese urban households is approximately 22%. It is found that the indirect effect is stronger than the direct effect. These findings prove that the initial goals of the government on energy conservation and emission reduction could not be achieved by improving energy efficiency alone, but need to be supplemented with relevant energy pricing reforms. - Highlights: • This study disaggregates the effect into the direct and indirect effects. • The rebound effect of Chinese urban households is approximately 22%. • The indirect effect is stronger than the direct effect. • Energy pricing reform is needed to mitigate the rebound effect

  17. [Synergistic emission reduction of chief air pollutants and greenhouse gases-based on scenario simulations of energy consumptions in Beijing].

    Science.gov (United States)

    Xie, Yuan-bo; Li, Wei

    2013-05-01

    It is one of the common targets and important tasks for energy management and environmental control of Beijing to improve urban air quality while reducing the emissions of greenhouse gases (GHG). Here, based on the interim and long term developmental planning and energy structure of the city, three energy consumption scenarios in low, moderate and high restrictions were designed by taking the potential energy saving policies and environmental targets into account. The long-range energy alternatives planning (LEAP) model was employed to predict and evaluate reduction effects of the chief air pollutants and GHG during 2010 to 2020 under the three given scenarios. The results showed that if urban energy consumption system was optimized or adjusted by exercising energy saving and emission reduction and pollution control measures, the predicted energy uses will be reduced by 10 to 30 million tons of coal equivalents by 2020. Under the two energy scenarios with moderate and high restrictions, the anticipated emissions of SO2, NOx, PM10, PM2.5, VOC and GHG will be respectively reduced to 71 to 100.2, 159.2 to 218.7, 89.8 to 133.8, 51.4 to 96.0, 56.4 to 74.8 and 148 200 to 164 700 thousand tons. Correspondingly, when compared with the low-restriction scenario, the reducing rate will be 53% to 67% , 50% to 64% , 33% to 55% , 25% to 60% , 41% to 55% and 26% to 34% respectively. Furthermore, based on a study of synergistic emission reduction of the air pollutants and GHG, it was proposed that the adjustment and control of energy consumptions shall be intensively developed in the three sectors of industry, transportation and services. In this way the synergistic reduction of the emissions of chief air pollutants and GHG will be achieved; meanwhile the pressures of energy demands may be deliberately relieved.

  18. [Awareness of health co-benefits of carbon emissions reduction in urban residents in Beijing: a cross-sectional survey].

    Science.gov (United States)

    Gao, J H; Zhang, Y; Wang, J; Chen, H J; Zhang, G B; Liu, X B; Wu, H X; Li, J; Li, J; Liu, Q Y

    2017-05-10

    Objective: To understand the awareness of the health co-benefits of carbon emission reduction in urban residents in Beijing and the influencing factors, and provide information for policy decision on carbon emission reduction and health education campaigns. Methods: Four communities were selected randomly from Fangshan, Haidian, Huairou and Dongcheng districts of Beijing, respectively. The sample size was estimated by using Kish-Leslie formula for descriptive analysis. 90 participants were recruited from each community. χ (2) test was conducted to examine the associations between socio-demographic variables and individuals' awareness of the health co-benefits of carbon emission reduction. Ordinal logistic regression analysis was performed to investigate the factors influencing the awareness about the health co-benefits. Results: In 369 participants surveyed, 12.7 % reported they knew the health co-benefits of carbon emission reduction. The final logistic regression analysis revealed that age ( OR =0.98), attitude to climate warming ( OR =0.72) and air pollution ( OR =1.59), family monthly average income ( OR =1.27), and low carbon lifestyle ( OR =2.36) were important factors influencing their awareness of the health co-benefits of carbon emission reduction. Conclusion: The awareness of the health co-benefits of carbon emissions reduction were influenced by people' socio-demographic characteristics (age and family income), concerns about air pollution and climate warming, and low carbon lifestyle. It is necessary to take these factors into consideration in future development and implementation of carbon emission reduction policies and related health education campaigns.

  19. [Carbon capture and storage (CCS) and its potential role to mitigate carbon emission in China].

    Science.gov (United States)

    Chen, Wen-Ying; Wu, Zong-Xin; Wang, Wei-Zhong

    2007-06-01

    Carbon capture and storage (CCS) has been widely recognized as one of the options to mitigate carbon emission to eventually stabilize carbon dioxide concentration in the atmosphere. Three parts of CCS, which are carbon capture, transport, and storage are assessed in this paper, covering comparisons of techno-economic parameters for different carbon capture technologies, comparisons of storage mechanism, capacity and cost for various storage formations, and etc. In addition, the role of CCS to mitigate global carbon emission is introduced. Finally, China MARKAL model is updated to include various CCS technologies, especially indirect coal liquefaction and poly-generation technologies with CCS, in order to consider carbon emission reduction as well as energy security issue. The model is used to generate different scenarios to study potential role of CCS to mitigate carbon emissions by 2050 in China. It is concluded that application of CCS can decrease marginal abatement cost and the decrease rate can reach 45% for the emission reduction rate of 50%, and it can lessen the dependence on nuclear power development for stringent carbon constrains. Moreover, coal resources can be cleanly used for longer time with CCS, e.g., for the scenario C70, coal share in the primary energy consumption by 2050 will increase from 10% when without CCS to 30% when with CCS. Therefore, China should pay attention to CCS R&D activities and to developing demonstration projects.

  20. Reduction of greenhouse gas in power industry by emission trading system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun Myung; Lee, Kee Hoon [Korea Energy Economics Institute, Euiwang (Korea)

    1999-04-01

    The rules governing their implementation and operation for implementing the Kyoto Protocol including emissions permit trading, project-based credit trading and the Clean Development Mechanism are to be decided at future talks. How these policies are eventually designed will determine the effectiveness of the Protocol. However, it has been passive and insufficient to deal with the Kyoto Protocol since there is no obligation on reduction of greenhouse gas emissions. Therefore, the issues on emissions permit trading are analyzed and the strategies for utilizing the Kyoto mechanism effectively are presented through reviewing the existing negotiation strategies. Moreover, how to use emissions permit trading in the power industry, the largest greenhouse gas emissions industry, is examined by dividing into two sections, domestic and abroad. (author). 62 refs., 2 figs., 42 tabs.

  1. Constructing carbon offsets: The obstacles to quantifying emission reductions

    International Nuclear Information System (INIS)

    Millard-Ball, Adam; Ortolano, Leonard

    2010-01-01

    The existing literature generally ascribes the virtual absence of the transport sector from the Clean Development Mechanism (CDM) to the inherent complexity of quantifying emission reductions from mobile sources. We use archival analysis and interviews with CDM decision-makers and experts to identify two additional groups of explanations. First, we show the significance of aspects of the CDM's historical evolution, such as the order in which methodologies were considered and the assignment of expert desk reviewers. Second, we highlight inconsistencies in the treatment of uncertainty across sectors. In contrast to transport methodologies, other sectors are characterized by a narrow focus on sources of measurement uncertainty and a neglect of economic effects ('market leakages'). We do not argue that the rejection of transport methodologies was unjustified, but rather than many of the same problems are inherent in other sectors. Thus, the case of transport sheds light on fundamental problems in quantifying emission reductions under the CDM. We argue that a key theoretical attraction of the CDM-equalization of marginal abatement costs across all sectors-has been difficult to achieve in practice.

  2. Device with Complex System for Heat Utilization and Reduction of Hazardous Air Emissions

    Directory of Open Access Journals (Sweden)

    O. V. Kascheeva

    2012-01-01

    Full Text Available Investigations concern heat utilization and reduction of hazardous emissions occurring in residential buildings and accompanying operation of a great number of industrial enterprises in particular heat and power objects, and firstly, heat-generating units of small power located in densely populated residential areas without centralized heat supply.The investigation target is to reduce cost of heat produced by independent system of building heat supply, reduction of air pollution  due to hazardous gas emissions and reduction of heat pollution of the environment as a result of building ventilation system operation, ventilation of their internal and external sewerage network and higher reliability of their operation.The target is achieved because the device with complex system for heat utilization and reduction of hazardous air emissions has additionally an assembly tank for mixing flue gases, ventilation emissions and atmospheric air, heat pump. Evaporation zone of the pump is a condensator of the gas mixture and its condensate zone contains a heat supply line for a heat consumer. The line is equipped with assembling  and distributing collectors, pipeline connecting the heat supply line with the system of direct and return delivery water from a boiler house, a separator for division of liquid and gaseous mixture phases, neutralizing devices for separate reduction of concentrations of hazardous and odorous substances being released in gaseous and liquid portions of the mixture, a pipeline for periodic supply of air with higher concentration of hazardous and odorous substances in the boiler furnace. The supplied air is obtained as a result of its passing through gas filters at their regeneration when their exchange capacity is exhausted.

  3. Reductions in greenhouse gas emissions and oil use by DME (di-methyl ether) and FT (Fischer-Tropsch) diesel production in chemical pulp mills

    Energy Technology Data Exchange (ETDEWEB)

    Joelsson, Jonas M., E-mail: joelsson.jonas@hotmail.com [Ecotechnology and Environmental Science, Mid Sweden University, SE-831 25 Oestersund (Sweden); Gustavsson, Leif [Linnaeus University, SE- 351 95 Vaexjoe (Sweden)

    2012-03-15

    Using energy systems analysis, we examine the potential to reduce CO{sub 2} emissions and oil use by integrating motor biofuel production with pulp mills. BLG-DME (black liquor gasification with di-methyl ether production) is compared with solid biomass gasification with BIG-FT (solid biomass gasification with Fischer-Tropsch fuel production). The studied systems are expanded with stand-alone production of biomass-based electricity and motor fuel so that they yield the same functional unit in terms of motor fuel and electricity as well as pulp or paper product, in order to facilitate comparison. More motor biofuel can be produced in integration with the studied mills with BLG-DME than with BIG-FT because the black liquor flow is large compared with other fuel streams in the mill and the integration potential for BIG-FT is limited by the mill's heat demand. When both systems are required to produce the same functional unit, the BLG-DME system achieves higher system efficiency and larger reductions in CO{sub 2} emissions and oil use per unit of biomass consumed. In general, integration of motor biofuel production with a pulp mill is more efficient than stand-alone motor biofuel production. Larger reductions in CO{sub 2} emissions or oil use can, however, be achieved if biomass replaces coal or oil in stationary applications. -- Highlights: Black-Right-Pointing-Pointer CO{sub 2} emission and oil use reductions quantified for pulp mill-based biorefineries. Black-Right-Pointing-Pointer Black liquor gasification gives larger reductions than solid biomass gasification. Black-Right-Pointing-Pointer Lower mill steam demand increases the black liquor gasification advantage. Black-Right-Pointing-Pointer Biomass directly replacing coal or oil in stationary plants gives larger reductions.

  4. Wood burning stoves and small boilers - particle emissions and reduction initiatives; Braendeovne og smae kedler - partikelemissioner og reduktionstiltag

    Energy Technology Data Exchange (ETDEWEB)

    Illerup, J B; Capral Henriksen, T; Lundhede, T [Danmarks Miljoeundersoegelser, Aarhus Universitet, Aarhus (Denmark); Breugel, C van; Zoellner Jensen, N [Miljoestyrelsen, Copenhagen (Denmark)

    2007-06-15

    Pollution from burning wood in private households, and the environmental and health consequences of this is determined in practice by a complicated interaction between a number of factors, including firing habits, fuel, type of stove/boiler, chimney and location of the chimney in relation to the surroundings. This report maps out the technologies used today for burning wood in private households, how these technologies contribute to particle emissions and which technologies may potentially reduce emissions of particles from burning wood in households in Denmark. Moreover, the possible emissions reductions and the financial costs incurred by consumers from different initiatives have been estimated. This report does not deal with possible initiatives for improvement of firing habits, fuel quality and chimneys. (au)

  5. Reduced emissions of greenhouse gases 2050: Technological wedges - Input to the Commission on Low Emissions; Reduserte klimagassutslipp 2050: Teknologiske kiler - Innspill til Lavutslippsutvalget

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Eva; Espegren, Kari Aamodt; Finden, Per; Hageman, Rolf; Stenersen, Dag

    2006-09-15

    The Commission on Low Emissions was established in March 2005 and has been charged with the task of describing how Norway can achieve a 50-80 percent reduction in emissions of greenhouse gases by 2050. The commission describes the desired total reduction in emissions to be a set of actions or 'wedges', meaning that the reduction in emissions are linked to an array of technological and behavioural changes. The technological wedges are described here, while the behavioural wedges are treated in a different report. The potentials described are based on the Low Emission's reference line. Possible changes in the reference line will result in changed potentials. The technological wedges studied comprise to a great extent a potential of 50-80 percent reduction in greenhouse gases by 2050. This depends on considerable effort from research and development, and a determination to change external conditions.

  6. Temporal and Spatial Variations in Provincial CO2 Emissions in China from 2005 to 2015 and Assessment of a Reduction Plan

    Directory of Open Access Journals (Sweden)

    Xuankai Deng

    2015-05-01

    Full Text Available This study calculated the provincial carbon dioxide (CO2 emissions in China, analyzed the temporal and spatial variations in emissions, and determined the emission intensity from 2005 to 2015. The total emissions control was forecasted in 2015, and the reduction pressure of the 30 provinces in China was assessed based on historical emissions and the 12th five-year (2011–2015 reduction plan. Results indicate that CO2 emissions eventually increased and gradually decreased from east to west, whereas the emission intensity ultimately decreased and gradually increased from south to north. By the end of 2015, the total control of provincial emissions will increase significantly compared to the 2010 level, whereas the emission intensity will decrease. The provinces in the North, East, and South Coast regions will maintain the highest emission levels. The provinces in the Southwest and Northwest regions will experience a rapid growth rate of emissions. However, the national emission reduction target will nearly be achieved if all provinces can implement reduction targets as planned. Pressure indices show that the South Coast and Northwest regions are confronted with a greater reduction pressure of emission intensity. Finally, policy implications are provided for CO2 reductions in China.

  7. Analysis on energy saving and emission reduction of clean energy technology in ports

    Science.gov (United States)

    Zhu, Li; Qin, Cuihong; Peng, Chuansheng

    2018-02-01

    This paper discusses the application of clean energy technology in ports. Using Ningbo port Co. Ltd. Beilun second container terminal branch as an example, we analyze the effect of energy saving and emission reduction of CO2 and SO2 by clean energy alternative to fuel oil, and conclude that the application of clean energy technology in the container terminal is mature, and can achieve effect of energy-saving and emission reduction of CO2 and SO2. This paper can provide as a reference for the promotion and application of clean energy in ports.

  8. High-global warming potential F-gas emissions in California: comparison of ambient-based versus inventory-based emission estimates, and implications of refined estimates.

    Science.gov (United States)

    Gallagher, Glenn; Zhan, Tao; Hsu, Ying-Kuang; Gupta, Pamela; Pederson, James; Croes, Bart; Blake, Donald R; Barletta, Barbara; Meinardi, Simone; Ashford, Paul; Vetter, Arnie; Saba, Sabine; Slim, Rayan; Palandre, Lionel; Clodic, Denis; Mathis, Pamela; Wagner, Mark; Forgie, Julia; Dwyer, Harry; Wolf, Katy

    2014-01-21

    To provide information for greenhouse gas reduction policies, the California Air Resources Board (CARB) inventories annual emissions of high-global-warming potential (GWP) fluorinated gases, the fastest growing sector of greenhouse gas (GHG) emissions globally. Baseline 2008 F-gas emissions estimates for selected chlorofluorocarbons (CFC-12), hydrochlorofluorocarbons (HCFC-22), and hydrofluorocarbons (HFC-134a) made with an inventory-based methodology were compared to emissions estimates made by ambient-based measurements. Significant discrepancies were found, with the inventory-based emissions methodology resulting in a systematic 42% under-estimation of CFC-12 emissions from older refrigeration equipment and older vehicles, and a systematic 114% overestimation of emissions for HFC-134a, a refrigerant substitute for phased-out CFCs. Initial, inventory-based estimates for all F-gas emissions had assumed that equipment is no longer in service once it reaches its average lifetime of use. Revised emission estimates using improved models for equipment age at end-of-life, inventories, and leak rates specific to California resulted in F-gas emissions estimates in closer agreement to ambient-based measurements. The discrepancies between inventory-based estimates and ambient-based measurements were reduced from -42% to -6% for CFC-12, and from +114% to +9% for HFC-134a.

  9. Low-Carbon Natural Gas for Transportation: Well-to-Wheels Emissions and Potential Market Assessment in California

    Energy Technology Data Exchange (ETDEWEB)

    Penev, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Melaina, Marc [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bush, Brian [National Renewable Energy Lab. (NREL), Golden, CO (United States); Muratori, Matteo [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chen, Yuche [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-12-01

    This report improves on the understanding of the long-term technology potential of low-carbon natural gas (LCNG) supply pathways by exploring transportation market adoption potential through 2035 in California. Techno-economic assessments of each pathway are developed to compare the capacity, cost, and greenhouse gas (GHG) emissions of select LCNG production pathways. The study analyzes the use of fuel from these pathways in light-, medium-, and heavy-duty vehicle applications. Economic and life-cycle GHG emissions analysis suggest that landfill gas resources are an attractive and relatively abundant resource in terms of cost and GHG reduction potential, followed by waste water treatment plants and biomass with gasification and methanation. Total LCNG production potential is on the order of total natural gas demand anticipated in a success scenario for future natural gas vehicle adoption by 2035 across light-, medium-, and heavy-duty vehicle markets (110 trillion Btu/year).

  10. MEASUREMENTS OF ABSORPTION, EMISSIVITY REDUCTION, AND LOCAL SUPPRESSION OF SOLAR ACOUSTIC WAVES IN SUNSPOTS

    International Nuclear Information System (INIS)

    Chou, D.-Y.; Liang, Z.-C.; Yang, M.-H.; Zhao Hui; Sun, M.-T.

    2009-01-01

    The power of solar acoustic waves in magnetic regions is lower relative to the quiet Sun. Absorption, emissivity reduction, and local suppression of acoustic waves contribute to the observed power reduction in magnetic regions. We propose a model for the energy budget of acoustic waves propagating through a sunspot in terms of the coefficients of absorption, emissivity reduction, and local suppression of the sunspot. Using the property that the waves emitted along the wave path between two points have no correlation with the signal at the starting point, we can separate the effects of these three mechanisms. Applying this method to helioseismic data filtered with direction and phase-velocity filters, we measure the fraction of the contribution of each mechanism to the power deficit in the umbra of the leading sunspot of NOAA 9057. The contribution from absorption is 23.3 ± 1.3%, emissivity reduction 8.2 ± 1.4%, and local suppression 68.5 ± 1.5%, for a wave packet corresponding to a phase velocity of 6.98 x 10 -5 rad s -1 .

  11. The Potential of Road Pricing Schemes for Reducing Carbon Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Nocera, S.; Giaretta, F.; Cavallaro, F.

    2016-07-01

    Road pricing is a transport measure mainly conceived to fund road management, to regulate the demand for traffic and to reduce the number of private vehicles circulating in urban areas. It can also grant benefits in terms of environmental externalities including the reduction of CO2 emissions, which has recently become one of the most important elements defining the sustainability of a transport system. However, the carbon potential granted by road charging is rarely assessed, thus confirming a sort of secondary role attributed to CO2 in urban premises. This paper provides an accurate analysis of the relationship between the different forms of road pricing (including distance-based, congestion-based and pay-as-you-drive) and their effective role in terms of carbon reduction, which in some contexts is higher than 10%. Furthermore, practical suggestions to policy makers in terms of implementation of the measure are discussed, highlighting the precautions necessary to include a fair carbon evaluation into an overall effective analysis. (Author)

  12. Evaluation of Efficiency Activities in the Industrial Sector Undertaken in Response to Greenhouse Gas Emission Reduction Targets

    Energy Technology Data Exchange (ETDEWEB)

    Price, Lynn; de la Rue du Can, Stephane; Lu, Hongyou; Horvath, Arpad

    2010-05-21

    The 2006 California Global Warming Solutions Act calls for reducing greenhouse gas (GHG) emissions to 1990 levels by 2020. Meeting this target will require action from all sectors of the California economy, including industry. The industrial sector consumes 25% of the energy used and emits 28% of the carbon dioxide (CO{sub 2}) produced in the state. Many countries around the world have national-level GHG reduction or energy-efficiency targets, and comprehensive programs focused on implementation of energy efficiency and GHG emissions mitigation measures in the industrial sector are essential for achieving their goals. A combination of targets and industry-focused supporting programs has led to significant investments in energy efficiency as well as reductions in GHG emissions within the industrial sectors in these countries. This project has identified program and policies that have effectively targeted the industrial sector in other countries to achieve real energy and CO{sub 2} savings. Programs in Ireland, France, The Netherlands, Denmark, and the UK were chosen for detailed review. Based on the international experience documented in this report, it is recommended that companies in California's industrial sector be engaged in a program to provide them with support to meet the requirements of AB32, The Global Warming Solution Act. As shown in this review, structured programs that engage industry, require members to evaluate their potential efficiency measures, plan how to meet efficiency or emissions reduction goals, and provide support in achieving the goals, can be quite effective at assisting companies to achieve energy efficiency levels beyond those that can be expected to be achieved autonomously.

  13. A mathematical/physics carbon emission reduction strategy for building supply chain network based on carbon tax policy

    Directory of Open Access Journals (Sweden)

    Li Xueying

    2017-03-01

    Full Text Available Under the background of a low carbon economy, this paper examines the impact of carbon tax policy on supply chain network emission reduction. The integer linear programming method is used to establish a supply chain network emission reduction such a model considers the cost of CO2 emissions, and analyses the impact of different carbon price on cost and carbon emissions in supply chains. The results show that the implementation of a carbon tax policy can reduce CO2 emissions in building supply chain, but the increase in carbon price does not produce a reduction effect, and may bring financial burden to the enterprise. This paper presents a reasonable carbon price range and provides decision makers with strategies towards realizing a low carbon building supply chain in an economical manner.

  14. Influence on the oxidative potential of a heavy-duty engine particle emission due to selective catalytic reduction system and biodiesel blend.

    Science.gov (United States)

    Godoi, Ricardo H M; Polezer, Gabriela; Borillo, Guilherme C; Brown, Andrew; Valebona, Fabio B; Silva, Thiago O B; Ingberman, Aline B G; Nalin, Marcelo; Yamamoto, Carlos I; Potgieter-Vermaak, Sanja; Penteado Neto, Renato A; de Marchi, Mary Rosa R; Saldiva, Paulo H N; Pauliquevis, Theotonio; Godoi, Ana Flavia L

    2016-08-01

    Although the particulate matter (PM) emissions from biodiesel fuelled engines are acknowledged to be lower than those of fossil diesel, there is a concern on the impact of PM produced by biodiesel to human health. As the oxidative potential of PM has been suggested as trigger for adverse health effects, it was measured using the Electron Spin Resonance (OP(ESR)) technique. Additionally, Energy Dispersive X-ray Fluorescence Spectroscopy (EDXRF) was employed to determine elemental concentration, and Raman Spectroscopy was used to describe the amorphous carbon character of the soot collected on exhaust PM from biodiesel blends fuelled test-bed engine, with and without Selective Catalytic Reduction (SCR). OP(ESR) results showed higher oxidative potential per kWh of PM produced from a blend of 20% soybean biodiesel and 80% ULSD (B20) engine compared with a blend of 5% soybean biodiesel and 95% ULSD (B5), whereas the SCR was able to reduce oxidative potential for each fuel. EDXRF data indicates a correlation of 0.99 between concentration of copper and oxidative potential. Raman Spectroscopy centered on the expected carbon peaks between 1100cm(-1) and 1600cm(-1) indicate lower molecular disorder for the B20 particulate matter, an indicative of a more graphitic carbon structure. The analytical techniques used in this study highlight the link between biodiesel engine exhaust and increased oxidative potential relative to biodiesel addition on fossil diesel combustion. The EDXRF analysis confirmed the prominent role of metals on free radical production. As a whole, these results suggest that 20% of biodiesel blends run without SCR may pose an increased health risk due to an increase in OH radical generation. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Greenhouse gas emission reduction scenarios for BC : meeting the twin objectives of temperature stabilization and global equity

    International Nuclear Information System (INIS)

    Campbell, C.R.

    2008-08-01

    Greenhouse gas (GHG) emissions reduction strategies are needed in order to prevent rises in global temperatures. This report presented 6 GHG emission scenarios conducted to understand the kind of contribution that the province of British Columbia (BC) might make towards reducing global warming in the future. Short, medium, and longer term GHG reduction targets were benchmarked. The University of Victoria earth system climate model was used to calculate emission pathways where global average temperature did not exceed 2 degrees C above pre-industrial values, and where atmospheric GHGs were stabilized at 400 ppm of carbon dioxide equivalent (CO 2 e). Global carbon emission budgets of the total amount of GHG emissions permissible between now and 2100 were identified. A carbon emission budget for 2008 to 2100 was then developed based on the population of BC. Average annual emission reduction rates for the world and for BC were also identified. It was concluded that dramatically reduced emissions will be insufficient to achieve an equilibrium temperature less than 2 degrees C above pre-industrial levels. Global reductions of greater than 80 per cent are needed to prevent unacceptable levels of ocean acidification. Results suggested that carbon sequestration technologies may need to be used to remove CO 2 from the atmosphere by artificial means. 38 refs., 5 tabs., 4 figs

  16. An analysis of energy strategies for CO2 emission reduction in China. Case studies by MARKAL model

    International Nuclear Information System (INIS)

    Li Guangya

    1994-12-01

    The China's energy system has been analyzed by using the MARKAL model in this study and the time period is from the year 1990 to 2050. The MARKAL model is applied here to evaluate the cost effective energy strategies for CO 2 emission reduction in China. Firstly the Reference Energy System (RES) of China and its database were established, and the useful energy demand was projected on the basis of China's economic target and demographic forecasting. Four scenarios, BASE1-BASE4 were defined with different assumptions of crude oil and natural uranium availability. Analytical results show that without CO 2 emission constrains coal consumption will continue to hold a dominant position in primary energy supply, and CO 2 emissions in 2050 will be 9.55 BtCO 2 and 10.28 BtCO 2 with different natural uranium availability. Under the CO 2 emission constraints, nuclear and renewable energy will play important roles in CO 2 emission reduction, and feasible maximum CO 2 emission reduction estimated by this study is 3.16 BtCO 2 in 2050. The cumulative CO 2 emission from 1990 to 2050 will be 418.25 BtCO 2 and 429.16 BtCO 2 with different natural uranium availability. Total feasible maximum CO 2 emission reduction from 1990 to 2050 is 95.97 BtCO 2 . (author)

  17. Undertaking high impact strategies: The role of national efficiency measures in long-term energy and emission reduction in steel making

    International Nuclear Information System (INIS)

    Xu, Tengfang; Karali, Nihan; Sathaye, Jayant

    2014-01-01

    Highlights: • Evaluate long-term effects of national energy efficiency in steel making. • Use bottom-up optimization for projection in China, India and the U.S. • The effects include changes in steel production, energy use, emissions, and costs. • Three emission targets induce different structural changes and investments. • Projected energy and CO 2 intensity declines in each country from 2010 to 2050. - Abstract: In this paper, we applied bottom-up linear optimization modeling to analyze long-term national impacts of implementing energy efficiency measures on energy savings, CO 2 -emission reduction, production, and costs of steel making in China, India, and the U.S. We first established two base scenarios representing business-as-usual steel production for each country from 2010 to 2050; Base scenario (in which no efficiency measure is available) and Base-E scenario (in which efficiency measures are available), and model scenarios representing various emission-reduction targets that affects production, annual energy use and costs with the goal of cost minimization. A higher emission-reduction target generally induces larger structural changes and increased investments in nation-wide efficiency measures, in addition to autonomous improvement expected in the Base scenario. Given the same emission-reduction target compared to the base scenario, intensity of annual energy use and emissions exhibits declining trends in each country from year 2010 to 2050. While a higher emission-reduction target result in more energy reduction from the base scenario, such reduction can become more expensive to achieve. The results advance our understanding of long-term effects of national energy efficiency applications under different sets of emission-reduction targets for steel sectors in the three major economies, and provide useful implications for high impact strategies to manage production structures, production costs, energy use, and emission reduction in steel making

  18. Electricity generation: options for reduction in carbon emissions.

    Science.gov (United States)

    Whittington, H W

    2002-08-15

    Historically, the bulk production of electricity has been achieved by burning fossil fuels, with unavoidable gaseous emissions, including large quantities of carbon dioxide: an average-sized modern coal-burning power station is responsible for more than 10 Mt of CO(2) each year. This paper details typical emissions from present-day power stations and discusses the options for their reduction. Acknowledging that the cuts achieved in the past decade in the UK CO(2) emissions have been achieved largely by fuel switching, the remaining possibilities offered by this method are discussed. Switching to less-polluting fossil fuels will achieve some measure of reduction, but the basic problem of CO(2) emissions continues. Of the alternatives to fossil fuels, only nuclear power represents a zero-carbon large-scale energy source. Unfortunately, public concerns over safety and radioactive waste have still to be assuaged. Other approaches include the application of improved combustion technology, the removal of harmful gases from power-station flues and the use of waste heat to improve overall power-station efficiency. These all have a part to play, but many consider our best hope for emissions reduction to be the use of renewable energy. The main renewable energy contenders are assessed in this paper and realistic estimates of the contribution that each could provide are indicated. It appears that, in the time-scale envisaged by planners for reduction in CO(2) emission, in many countries renewable energy will be unlikely to deliver. At the same time, it is worth commenting that, again in many countries, the level of penetration of renewable energy will fall short of the present somewhat optimistic targets. Of renewable options, wind energy could be used in the short to medium term to cover for thermal plant closures, but for wind energy to be successful, the network will have to be modified to cope with wind's intermittent nature. Globally, hydroelectricity is currently the

  19. Energy and environmental implications of carbon emission reduction targets: Case of Kathmandu Valley, Nepal

    International Nuclear Information System (INIS)

    Shrestha, Ram M.; Rajbhandari, Salony

    2010-01-01

    This paper analyzes the sectoral energy consumption pattern and emissions of CO 2 and local air pollutants in the Kathmandu Valley, Nepal. It also discusses the evolution of energy service demands, structure of energy supply system and emissions from various sectors under the base case scenario during 2005-2050. A long term energy system planning model of the Kathmandu Valley based on the MARKet ALlocation (MARKAL) framework is used for the analyses. Furthermore, the paper analyzes the least cost options to achieve CO 2 emission reduction targets of 10%, 20% and 30% below the cumulative emission level in the base case and also discusses their implications for total cost, technology-mix, energy-mix and local pollutant emissions. The paper shows that a major switch in energy use pattern from oil and gas to electricity would be needed in the Valley to achieve the cumulative CO 2 emission reduction target of 30% (ER30). Further, the share of electricity in the cumulative energy consumption of the transport sector would increase from 12% in the base case to 24% in the ER30 case.

  20. Optimal scenario balance of reduction in costs and greenhouse gas emissions for municipal solid waste management

    Institute of Scientific and Technical Information of China (English)

    邓娜; 张强; 陈广武; 齐长青; 崔文谦; 张于峰; 马洪亭

    2015-01-01

    To reduce carbon intensity, an improved management method balancing the reduction in costs and greenhouse gas (GHG) emissions is required for Tianjin’s waste management system. Firstly, six objective functions, namely, cost minimization, GHG minimization, eco-efficiency minimization, cost maximization, GHG maximization and eco-efficiency maximization, are built and subjected to the same constraints with each objective function corresponding to one scenario. Secondly, GHG emissions and costs are derived from the waste flow of each scenario. Thirdly, the range of GHG emissions and costs of other potential scenarios are obtained and plotted through adjusting waste flow with infinitely possible step sizes according to the correlation among the above six scenarios. And the optimal scenario is determined based on this range. The results suggest the following conclusions. 1) The scenarios located on the border between scenario cost minimization and GHG minimization create an optimum curve, and scenario GHG minimization has the smallest eco-efficiency on the curve;2) Simple pursuit of eco-efficiency minimization using fractional programming may be unreasonable; 3) Balancing GHG emissions from incineration and landfills benefits Tianjin’s waste management system as it reduces GHG emissions and costs.

  1. On the Potential of Nuclear Fission Energy for Effective Reduction of Carbon Emission under the Constraint of Uranium Resources Use without Spent Fuel Reprocessing

    International Nuclear Information System (INIS)

    Knapp, V.; Pevec, D.; Matijevic, M.

    2010-01-01

    Urgency to stop further increase of greenhouse gases emissions and reverse the trends, as stated in the Fourth Intergovernmental Panel on Climate Change (IPPC) Report and in Copenhagen discussions, limits the realistic choice of energy technologies to those available now or in the near future of few decades. In the coming fifty years neither nuclear fusion nor carbon capture and storage (CCS) can be expected to give a significant contribution to world energy production. Two perspective intermittent sources such as wind and solar together with nuclear fission energy covering the base load consumption appears to be a combination with a potential to produce a large share of carbon free energy in the total world energy production. This contribution considers the issues, associated with required large scale deployment of nuclear fission energy. A serious question associated with nuclear energy is nuclear proliferation. Spread of uranium enrichment and spent fuel reprocessing installations in many new countries constructing nuclear reactors would be a major concern in present political environment. We investigate whether uranium resources would be sufficient to support nuclear build-up in next 50-60 years sufficiently large to significantly reduce carbon emission without reprocessing of spent nuclear fuel. A positive answer would mean that 50-60 years can be available to develop effective international control of nuclear fuel cycle installations. Our results show that a maximum nuclear build-up which would consume currently estimated uranium resources by 2065 without reprocessing could reduce by 2065 carbon emission by 39.6% of the total reduction needed to bring the WEO 2009 Reference Scenario prediction of total GHG emissions in 2065 to the level of the WEO 450 Scenario limiting global temperature increase to 2 degrees of C. The less demanding strategy of the nuclear replacement of all non-CCS coal power plants retiring during the 2025-2065 period would reduce emission

  2. Modeling transitions in the California light-duty vehicles sector to achieve deep reductions in transportation greenhouse gas emissions

    International Nuclear Information System (INIS)

    Leighty, Wayne; Ogden, Joan M.; Yang, Christopher

    2012-01-01

    California’s target for reducing economy-wide greenhouse gas (GHG) emissions is 80% below 1990 levels by 2050. We develop transition scenarios for meeting this goal in California’s transportation sector, with focus on light-duty vehicles (LDVs). We explore four questions: (1) what options are available to reduce transportation sector GHG emissions 80% below 1990 levels by 2050; (2) how rapidly would transitions in LDV markets, fuels, and travel behaviors need to occur over the next 40 years; (3) how do intermediate policy goals relate to different transition pathways; (4) how would rates of technological change and market adoption between 2010 and 2050 impact cumulative GHG emissions? We develop four LDV transition scenarios to meet the 80in50 target through a combination of travel demand reduction, fuel economy improvements, and low-carbon fuel supply, subject to restrictions on trajectories of technological change, potential market adoption of new vehicles and fuels, and resource availability. These scenarios exhibit several common themes: electrification of LDVs, rapid improvements in vehicle efficiency, and future fuels with less than half the carbon intensity of current gasoline and diesel. Availability of low-carbon biofuels and the level of travel demand reduction are “swing factors” that influence the degree of LDV electrification required. - Highlights: ► We model change in California LDVs for deep reduction in transportation GHG emissions. ► Reduced travel demand, improved fuel economy, and low-carbon fuels are all needed. ► Transitions must begin soon and occur quickly in order to achieve the 80in50 goal. ► Low-C biofuel supply and travel demand influence the need for rapid LDV electrification. ► Cumulative GHG emissions from LDVs can differ between strategies by up to 40%.

  3. Impact of International Oil Price on Energy Conservation and Emission Reduction in China

    Directory of Open Access Journals (Sweden)

    Jian Chai

    2016-05-01

    Full Text Available In the context of “new normal” economy and frequent “haze”, the strategy of energy conservation and emission reduction aiming to lower costs and reduce pollution is currently still a major strategic direction in China and the world, and will remain so for some time in the future. This paper uses the annual data of West Texas Intermediate (WTI crude oil price in 1987–2014 as samples. We firstly present the direction and mechanism of the influence of oil price change on total consumption of every kind of energy by path analysis, and then consider establishing a Structural Vector Autoregression model of energy conservation and emission reduction in three statuses. Research shows that if the international oil price increases by 1%, the energy consumption per GDP and carbon dioxide emission increase by 0.092% and 0.053% respectively in the corresponding period. In the status of high energy consumption and high emission, if the international oil price increases by 1%, the energy consumption per GDP and carbon dioxide emission increase by 0.043% and 0.065% respectively in the corresponding period. In the status of low energy consumption and low emission, if the international oil price increases by 1%, the energy consumption per GDP per unit increases by 0.067% and carbon dioxide emission decreases by 0.085% in the corresponding period.

  4. Integrated assessment of climate change with reductions of methane emissions

    NARCIS (Netherlands)

    Amstel, van A.R.

    2005-01-01

    We have been living in the anthropocene era since about 1950, and evidence of human influence on the natural ecosystems and climate is mounting. Reductions of greenhouse gas emissions are needed to reduce the effects of climate change in the future. In an integrated assessment with the IMAGE model

  5. A supply chain optimization framework for CO2 emission reduction: Case of the Netherlands

    OpenAIRE

    Kalyanarengan Ravi, N.; Zondervan, E.; van Sint Annaland, M.; Fransoo, J.C.; Grievink, J.; Claus, T.; Herrmann, F.; Manitz, M.; Rose, O.

    2016-01-01

    A major challenge for the industrial deployment of a CO2 emission reduction methodology is to reduce the overall cost and the integration of all the nodes in the supply chain for CO2 emission reduction. In this work, we develop a mixed integer linear optimization model that selects appropriate sources, capture process, transportation network and CO2 storage sites and optimize for a minimum overall cost. Initially, we screen the sources and storage options available in the Netherlands at diffe...

  6. Climate change : enhanced : recent reductions in China's greenhouse gas emissions.

    Energy Technology Data Exchange (ETDEWEB)

    Streets, D. G.; Jiang, K.; Hu, X.; Sinton, J. E.; Zhang, X.-Q.; Xu, D.; Jacobson, M. Z.; Hansen, J. E.; Decision and Information Sciences; Energy Research Inst.; LBNL; Chinese Academy of Forestry; Stanford Univ.; NASA Goddard Inst. for Space Studies

    2001-11-30

    Using the most recent energy and other statistical data, we have estimated the annual trends in China's greenhouse gas emissions for the period 1990 to 2000. The authors of this Policy Forum calculate that CO2 emissions declined by 7.3% between 1996 and 2000, while CH4 emissions declined by 2.2% between 1997 and 2000. These reductions were due to a combination of energy reforms, economic restructuring, forestry policies, and economic slowdown. The effects of these emission changes on global mean temperatures are estimated and compared with the effects of concurrent changes in two aerosol species, sulfate and black carbon.

  7. Diagnosing the uncertainty and detectability of emission reductions for REDD + under current capabilities: an example for Panama

    International Nuclear Information System (INIS)

    Pelletier, Johanne; Potvin, Catherine; Ramankutty, Navin

    2011-01-01

    In preparation for the deployment of a new mechanism that could address as much as one fifth of global greenhouse gas emissions by reducing emissions from deforestation and forest degradation (REDD +), important work on methodological issues is still needed to secure the capacity to produce measurable, reportable, and verifiable emissions reductions from REDD + in developing countries. To contribute to this effort, we have diagnosed the main sources of uncertainty in the quantification of emission from deforestation for Panama, one of the first countries to be supported by the Forest Carbon Partnership Facility of the World Bank and by UN-REDD. Performing sensitivity analyses using a land-cover change emissions model, we identified forest carbon stocks and the quality of land-cover maps as the key parameters influencing model uncertainty. The time interval between two land-cover assessments, carbon density in fallow and secondary forest, and the accuracy of land-cover classifications also affect our ability to produce accurate estimates. Further, we used the model to compare emission reductions from five different deforestation reduction scenarios drawn from governmental input. Only the scenario simulating a reduction in deforestation by half succeeds in crossing outside the confidence bounds surrounding the baseline emission obtained from the uncertainty analysis. These results suggest that with current data, real emission reductions in developing countries could be obscured by their associated uncertainties. Ways of addressing the key sources of error are proposed, for developing countries involved in REDD + , for improving the accuracy of their estimates in the future. These new considerations confirm the importance of current efforts to establish forest monitoring systems and enhance capabilities for REDD + in developing countries.

  8. Possibilities for the reduction of NOx emissions

    International Nuclear Information System (INIS)

    Marx, E.

    1993-01-01

    Nitrogen oxides develop mainly in the combustion of fossil fuels based on three mechanisms: process-dependent thermal NO; prompt NO as well as fuel-dependent NO. The reaction either takes places in the area of the root of the flame or with the combustion gases. A main effect on the amount of developing nitrogen oxides have the fuel, the burner design as well as the heat generator. In the last years considerable emission reductions were attained mainly by design changes of the burner, e.g. gas burners with internal circulation, burners with external exhaust gas recirculation, burners with internal recirculation. (BWI) [de

  9. GHG emissions and mitigation potential in Indian agriculture

    Science.gov (United States)

    Vetter, Sylvia; Feliciano, Diana; Sapkota, Tek; Hillier, Jon; Smith, Pete; Stirling, Clare

    2016-04-01

    India is one of the world's largest greenhouse gas (GHG) emitter, accounting for about 5% of global emissions with further increases expected in the future. The Government of India aims to reduce emission intensities by 20-25% by 2020 compared with the 2005 level. In a recent departure from past practice the reconvened Council on Climate Change stated that climate change in agriculture would include a component that would focus on reducing emissions in agriculture, particularly methane and nitrous oxide emissions. To develop recommendations for mitigation in agriculture in India, a baseline study is presented to analyse the GHG emissions from agriculture for current management (Directorate of Economics and Statistics of the government of India). This analysis is done for the two states Bihar and Haryana, which differ in their management and practises based on different climate and policies. This first analysis shows were the highest GHG emissions in agriculture is produced and were the highest mitigation potential might be. The GHG emissions and mitigation potential are calculated using the CCAFS Mitigation Option Tool (CCAFS-MOT) (https://ccafs.cgiar.org/mitigation-option-tool-agriculture#.VpTnWL826d4) with modifications for the special modelling. In a second step, stakeholder meetings provided a wide range of possible and definite scenarios (management, policy, technology, costs, etc.) for the future to mitigate emissions in agriculture as well as how to increase productivity. These information were used to create scenarios to give estimates for the mitigation potential in agriculture for India in 2020.

  10. Quantification of the Potential Gross Economic Impacts of Five Methane Reduction Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Keyser, David [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Curley, Christina [Colorado State Univ., Fort Collins, CO (United States)

    2015-04-23

    Methane (CH4) is a potent greenhouse gas that is released from the natural gas supply chain into the atmosphere as a result of fugitive emissions1 and venting2 . We assess five potential CH4 reduction scenarios from transmission, storage, and distribution (TS&D) using published literature on the costs and the estimated quantity of CH4 reduced. We utilize cost and methane inventory data from ICF (2014) and Warner et al. (forthcoming) as well as data from Barrett and McCulloch (2014) and the American Gas Association (AGA) (2013) to estimate that the implementation of these measures could support approximately 85,000 jobs annually from 2015 to 2019 and reduce CH4 emissions from natural gas TS&D by over 40%. Based on standard input/output analysis methodology, measures are estimated to support over $8 billion in GDP annually over the same time period and allow producers to recover approximately $912 million annually in captured gas.

  11. Observation of reduction of secondary electron emission from helium ion impact due to plasma-generated nanostructured tungsten fuzz

    International Nuclear Information System (INIS)

    Hollmann, E M; Doerner, R P; Nishijima, D; Pigarov, A Yu

    2017-01-01

    Growth of nanostructured fuzz on a tungsten target in a helium plasma is found to cause a significant (∼3×) reduction in ion impact secondary electron emission in a linear plasma device. The ion impact secondary electron emission is separated from the electron impact secondary electron emission by varying the target bias voltage and fitting to expected contributions from electron impact, both thermal and non-thermal; with the non-thermal electron contribution being modeled using Monte-Carlo simulations. The observed (∼3×) reduction is similar in magnitude to the (∼2×) reduction observed in previous work for the effect of tungsten fuzz formation on secondary electron emission due to electron impact. It is hypothesized that the observed reduction results from re-absorption of secondary electrons in the tungsten fuzz. (paper)

  12. Potential reduction of CO2 emissions and low carbon scenario for the Brazilian industrial sector for 2030; Potencial de reducao de emissoes de Co2 e cenario de baixo carbono para o setor industrial brasileiro para 2030

    Energy Technology Data Exchange (ETDEWEB)

    Henriques Junior, Mauricio F. [Instituto Nacional de Tecnologia (INT), Rio de Janeiro, RJ (Brazil)], email: mauricio.henriques@int.gov.br; Schaeffer, Roberto [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil)], email: roberto@ppe.ufrj.br

    2010-07-01

    This study discusses the potential for reducing carbon dioxide (CO2) emissions from energy use by the Brazilian industrial sector in a low-carbon scenario over a horizon until 2030. It evaluates the main mitigation measures, the quantities of this gas avoided and the respective abatement costs. In relation to a benchmark scenario projected for 2030, the reduction of CO2 emissions estimated here can reach 40% by adopting energy efficiency measures, materials recycling, cogeneration, shifting from fossil fuels to renewable or less carbon content sources, and eliminating the use of biomass from deforestation. The set of measures studied here would bring cumulative emissions reductions of nearly 1.5 billion tCO2 over a period of 20 years (2010-2030). This would require huge investments, but the majority of them would have significant economic return and negative abatement costs. However, in the cases there would be low economic attractiveness and higher abatement costs, thus requiring more effective incentives and a collective effort, from both the public and private sectors. (author)

  13. Reduction of emissions and geological storage of CO{sub 2}. Innovation an industrial stakes; Reduction des emissions et stockage geologique du CO{sub 2}. Innovation et enjeux industriels

    Energy Technology Data Exchange (ETDEWEB)

    Mandil, C.; Podkanski, J.; Socolow, R.; Dron, D.; Reiner, D.; Horrocks, P.; Fernandez Ruiz, P.; Dechamps, P.; Stromberg, L.; Wright, I.; Gazeau, J.C.; Wiederkehr, P.; Morcheoine, A.; Vesseron, P.; Feron, P.; Feraud, A.; Torp, N.T.; Christensen, N.P.; Le Thiez, P.; Czernichowski, I.; Hartman, J.; Roulet, C.; Roberts, J.; Zakkour, P.; Von Goerne, G.; Armand, R.; Allinson, G.; Segalen, L.; Gires, J.M.; Metz, B.; Brillet, B

    2005-07-01

    An international symposium on the reduction of emissions and geological storage of CO{sub 2} was held in Paris from 15 to 16 September 2005. The event, jointly organized by IFP, ADEME and BRGM, brought together over 400 people from more than 25 countries. It was an opportunity to review the international stakes related to global warming and also to debate ways of reducing CO{sub 2} emissions, taking examples from the energy and transport sectors. The last day was dedicated to technological advances in the capture and geological storage of CO{sub 2} and their regulatory and economic implications. This document gathers the available transparencies and talks presented during the colloquium: Opening address by F. Loos, French Minister-delegate for Industry; Session I - Greenhouse gas emissions: the international stakes. Outlook for global CO{sub 2} emissions. The global and regional scenarios: Alternative scenarios for energy use and CO{sub 2} emissions until 2050 by C. Mandil and J. Podkanski (IEA), The stabilization of CO{sub 2} emissions in the coming 50 years by R. Socolow (Princeton University). Evolution of the international context: the stakes and 'factor 4' issues: Costs of climate impacts and ways towards 'factor 4' by D. Dron (ENS Mines de Paris), CO{sub 2} emissions reduction policy: the situation in the United States by D. Reiner (MIT/Cambridge University), Post-Kyoto scenarios by P. Horrocks (European Commission), Possibilities for R and D in CO{sub 2} capture and storage in the future FP7 program by P. Fernandez Ruiz and P. Dechamps (European Commission). Session II - CO{sub 2} emission reductions in the energy and transport sectors. Reducing CO{sub 2} emissions during the production and conversion of fossil energies (fixed installations): Combined cycles using hydrogen by G. Haupt (Siemens), CO{sub 2} emission reductions in the oil and gas industry by I. Wright (BP). Reducing CO{sub 2} emissions in the transport sector: Sustainable

  14. Projects to Improve Air Quality at Ports – 2014 Diesel Emissions Reduction Act (DERA) Funding Opportunity - Closed Announcement FY 2014

    Science.gov (United States)

    OTAQ is soliciting proposals that achieve reductions in diesel emissions produced by diesel engines and diesel emissions exposure, from fleets operating at marine and inland water ports under the Diesel Emissions Reduction Act (DERA).

  15. Projects to Improve Air Quality at Ports – 2013 Diesel Emissions Reduction Act (DERA) Funding Opportunity - Closed Announcement FY 2014

    Science.gov (United States)

    OTAQ is soliciting proposals that achieve reductions in diesel emissions produced by diesel engines and diesel emissions exposure, from fleets operating at marine and inland water ports under the Diesel Emissions Reduction Act (DERA).

  16. Collaborative Emission Reduction Model Based on Multi-Objective Optimization for Greenhouse Gases and Air Pollutants.

    Science.gov (United States)

    Meng, Qing-chun; Rong, Xiao-xia; Zhang, Yi-min; Wan, Xiao-le; Liu, Yuan-yuan; Wang, Yu-zhi

    2016-01-01

    CO2 emission influences not only global climate change but also international economic and political situations. Thus, reducing the emission of CO2, a major greenhouse gas, has become a major issue in China and around the world as regards preserving the environmental ecology. Energy consumption from coal, oil, and natural gas is primarily responsible for the production of greenhouse gases and air pollutants such as SO2 and NOX, which are the main air pollutants in China. In this study, a mathematical multi-objective optimization method was adopted to analyze the collaborative emission reduction of three kinds of gases on the basis of their common restraints in different ways of energy consumption to develop an economic, clean, and efficient scheme for energy distribution. The first part introduces the background research, the collaborative emission reduction for three kinds of gases, the multi-objective optimization, the main mathematical modeling, and the optimization method. The second part discusses the four mathematical tools utilized in this study, which include the Granger causality test to analyze the causality between air quality and pollutant emission, a function analysis to determine the quantitative relation between energy consumption and pollutant emission, a multi-objective optimization to set up the collaborative optimization model that considers energy consumption, and an optimality condition analysis for the multi-objective optimization model to design the optimal-pole algorithm and obtain an efficient collaborative reduction scheme. In the empirical analysis, the data of pollutant emission and final consumption of energies of Tianjin in 1996-2012 was employed to verify the effectiveness of the model and analyze the efficient solution and the corresponding dominant set. In the last part, several suggestions for collaborative reduction are recommended and the drawn conclusions are stated.

  17. Environmental and economic effects of the Copenhagen pledges and more ambitious emission reduction targets. Interim report

    Energy Technology Data Exchange (ETDEWEB)

    Schleich, Joachim; Duscha, Vicki; Peterson, Everett B. [Fraunhofer-Institut fuer System- und Innovationsforschung, Karlsruhe (Germany); Virginia Tech, Blacksburg, VA (United States). Dept. of Agricultural and Applied Economics

    2010-06-15

    Global carbon dioxide emissions need to be reduced by at least 50 to 85 % in 2050 compared to 2000 levels to limit global surface temperature increase to 2 C compared to preindustrial levels (IPCC 2007). As an intermediate greenhouse gas emission reduction target for industrialized countries in 2020 the IPCC (2007) confirmed a range of 25 % to 40 % compared to 1990, together with a substantial deviation from baseline in some developing regions, which was quantified as reductions in the range of 15 % to 30 % below baseline (den Elzen and Hoehne 2008). This report explores the environmental and economic effects of the pledges submitted by industrialized and major developing countries for 2020 under the Copenhagen Accord as quantifiable emission reductions or as NAMAs. Two scenarios reflect the lower (''weak'') and upper (''ambitious'') bounds of the Copenhagen pledges leading to emission reductions of 17 % below 1990 levels for Annex I countries and 13 % below reference levels for Non-Annex I countries. Both scenarios do not reach the level of ambition indicated as necessary by science to keep temperature increase below 2 C. In addition, two scenarios in accordance with the IPCC range for reaching a 2 C target are analyzed with industrialized countries in aggregate reducing their CO{sub 2}-emissions by 30 % and by 40 % in 2020 compared to 1990 levels, respectively. For all four policy scenarios the effects of emission paths leading to a global reduction target of 50 % below 1990 levels in 2050 are also simulated for 2030. In the scenarios for 2030 all but the least developed countries are assumed to take on emission targets, but emission caps are considerably less stringent for developing countries than for developed countries. In addition, a separate scenario is carried out which estimates the costs of an unconditioned EU 30 % emission reduction target. The analyses are carried out with the dynamic Computable General

  18. Particle Reduction Strategies - PAREST. Traffic emission modelling. Model comparision and alternative scenarios. Sub-report

    International Nuclear Information System (INIS)

    Kugler, Ulrike; Theloke, Jochen; Joerss, Wolfram

    2013-01-01

    The modeling of the reference scenario and the various reduction scenarios in PAREST was based on the Central System of Emissions (CSE) (CSE, 2007). Emissions from road traffic were calculated by using the traffic emission model TREMOD (Knoerr et al., 2005) and fed into the CSE. The version TREMOD 4.17 has been used. The resulting emission levels in PAREST reference scenario were supplemented by the emission-reducing effect of the implementation of the future Euro 5 and 6 emission standards for cars and light commercial vehicles and Euro VI for heavy commercial vehicles in combination with the truck toll extension. [de

  19. A comprehensive analysis of China's regional energy saving and emission reduction efficiency: From production and treatment perspectives

    International Nuclear Information System (INIS)

    Wu, Jie; Lv, Lin; Sun, Jiasen; Ji, Xiang

    2015-01-01

    Energy and environmental issues have recently aroused increasing interest in China and many approaches are used to evaluate energy and environmental performance. In this paper, a two-stage network DEA framework is applied to evaluate the efficiency of energy saving and emission reduction in China during the period of the eleventh five-year plan, from 2006 to 2010. In this study, economic activities are divided into production and treatment processes. This is different from previous research which generally focused on either environmental efficiency or energy efficiency, omitting the integration of energy and environmental measures. Today, energy saving and emission reduction are both parts of the basic state policy of China and are equally important. The empirical results in this study show that: (i) eastern China has the best energy saving and emission reduction efficiency, performing is better than western and central China. (ii) The efficiency of the production process in central China is better than that in western China while the western area performs better than the central area in term of treatment efficiency. (iii) Integrated efficiency of energy saving and emission reduction of China was relatively stable in the five years and the pollution treatment efficiency maintained a rising trend. -- Highlights: •We measured China's regional energy saving and emission reduction efficiency using two-stage DEA approach. •The production and treatment processes are incorporated in evaluation. •Eastern China performs best in terms of energy saving and emission reduction efficiency. •Integrated efficiency of energy saving and emission reduction of China kept a stable trend during 2006–2010

  20. Primary Aluminum Reduction Industry - National Emission Standards for Hazardous Air Pollutants (NESHAP)

    Science.gov (United States)

    National emission standards for each new or existing potline, paste production operation, and anode bake furnace associated with a primary aluminum reduction plant. Includes rule history, implementation information and additional resources.

  1. Comparison of Greenhouse Gas Reduction Potential through Renewable Energy Transition in South Korea and Germany

    Directory of Open Access Journals (Sweden)

    Alexander Maennel

    2018-01-01

    Full Text Available Germany and South Korea are the world’s sixth and seventh largest emitters of greenhouse gases, respectively; their main sources of pollution being fossil-fueled power plants. Since both countries signed the Paris Agreement in 2016, renewable energy transition is emerging as an effective means and method for avoiding air pollutant emissions and for replacing old fossil-fueled power plants. This paper attempts to evaluate—by using a grid emission factor dependent on a series of energy mix scenarios—the potential for South Korea and Germany to reduce their air pollutants (CO2, NOx, SOx, PM (particulate matter until 2030. South Korea plans to reduce greenhouse gas emissions by increasing nuclear power, while Germany aims to do so by shutting down its nuclear power plants and expanding the proportion of renewable energy in the energy mix to over 50%. Therefore, both countries are able to achieve their voluntary greenhouse gas reduction targets in the power sector. However, since the uncertainty of the CO2 emission factor of coal power plants in South Korea is as high as 10%, efforts to reduce that uncertainty are required in order to produce a reliable assessment of the avoided emissions.

  2. Fumigant emission reductions with TIF warrant regulatory changes

    Directory of Open Access Journals (Sweden)

    Husein Ajwa

    2013-07-01

    Full Text Available With methyl bromide's phase-out, most growers have turned to alternative fumigants, particularly 1,3-dichloropropene (1,3-D and chloropicrin. These alternatives are tightly regulated because they are classified as toxic air contaminants and volatile organic compounds; the latter combine with other substances to produce ground-level ozone (smog. Two ambient air monitoring studies were conducted to evaluate the potential of totally impermeable film (TIF to reduce emissions from shank applications of chloropicrin and 1,3-D. In 2009, a study demonstrated that TIF reduced chloropicrin and 1,3-D peak emissions by 45% and 38%, respectively, but TIF did not reduce total emissions when it was cut after 6 days. In 2011, increasing the tarp period from 5 to 10 days decreased chloropicrin and 1,3-D peak emissions by 88% and 78%, and their total emissions by 64% and 43%, respectively. Concurrent dynamic flux chamber results corroborated the ambient air monitoring data. These studies provide regulatory agencies with mitigation measures that should allow continued fumigant use at efficacious application rates.

  3. A multinational model for CO2 reduction: defining boundaries of future CO2 emissions in nine countries

    International Nuclear Information System (INIS)

    Kram, Tom; Hill, Douglas.

    1996-01-01

    A need to make substantial future reductions in greenhouse gas emissions would require major changes in national energy systems. Nine industrialized countries have explored the technical boundaries of CO 2 emission restrictions during the next 40 to 50 years using comparable scenario assumptions and a standard model, MARKAL. Quantitative results for the countries are shown side by side in a set of energy maps that compare the least-cost evolution of the national energy systems by the main factors that contribute to CO 2 emissions. The ability to restrict future CO 2 emissions and the most cost-effective measures for doing so differ among the countries; an international agreement that would mandate substantial emission restrictions among countries by an equal percentage reduction is clearly impossible. The results are a first step toward a basis for allocating such international reductions, and the multinational process by which they were produced provides an example for further international greenhouse gas abatement costing studies. (Author)

  4. Mixed Carbon Policies Based on Cooperation of Carbon Emission Reduction in Supply Chain

    Directory of Open Access Journals (Sweden)

    Yongwei Cheng

    2017-01-01

    Full Text Available This paper established cooperation decision model for a mixed carbon policy of carbon trading-carbon tax (environmental tax in a two-stage S-M supply chain. For three different cooperative abatement situations, we considered the supplier driven model, the manufacturer driven model, and the equilibrium game model. We investigated the influence of mixed carbon policy with constraint of reduction targets on supply chain price, productivity, profits, carbon emissions reduction rate, and so on. The results showed that (1 high-strength carbon policies do not necessarily encourage enterprises to effectively reduce emissions, and increasing market acceptance of low carbon products or raising the price of carbon quota can promote the benign reduction; (2 perfect competitive carbon market has a higher carbon reduction efficiency than oligarch carbon market, but their optimal level of cooperation is the same and the realized reduction rate is in line with the intensity of carbon policy; (3 the policy sensitivity of the carbon trading mechanism is stronger than the carbon tax; “paid quota mechanism” can subsidize the cost of abatement and improve reduction initiative. Finally, we use a numerical example to solve the optimal decisions under different market situations, validating the effectiveness of model and the conclusions.

  5. What is a fair CO2 tax increase? On fair emission reductions in the transport sector

    International Nuclear Information System (INIS)

    Hammar, Henrik; Jagers, Sverker C.

    2007-01-01

    We examine how individual preferences for fair reductions of carbon dioxide (CO 2 ) emissions affect the support for increases in the CO 2 tax on gasoline and diesel. We assume that people not only care about their own material welfare, but also have preferences for fairness in policy design, and we explore the implications using original data from a mail questionnaire sent to a representative sample of the Swedish population. The main result is that fairness in policy design does matter. Those respondents who adhere to a fairness principle tend to be relatively more positive to increases in the CO 2 tax. One possible explanation for this result is that there is a relatively high degree of reciprocity regarding the origin of emissions and the fairness regarding who should bear the burden of CO 2 reductions. Via a split sample analysis, we also find that the relative importance of fairness principles is dependent upon whether one uses a car often or not. This sheds light on the potential goal conflict between the importance of fairness principles and self-interest in the form of a need for private car transportation. (author)

  6. Transportation Energy Futures Series: Effects of Travel Reduction and Efficient Driving on Transportation: Energy Use and Greenhouse Gas Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Porter, C. D.; Brown, A.; DeFlorio, J.; McKenzie, E.; Tao, W.; Vimmerstedt, L.

    2013-03-01

    Since the 1970s, numerous transportation strategies have been formulated to change the behavior of drivers or travelers by reducing trips, shifting travel to more efficient modes, or improving the efficiency of existing modes. This report summarizes findings documented in existing literature to identify strategies with the greatest potential impact. The estimated effects of implementing the most significant and aggressive individual driver behavior modification strategies range from less than 1% to a few percent reduction in transportation energy use and GHG emissions. Combined strategies result in reductions of 7% to 15% by 2030. Pricing, ridesharing, eco-driving, and speed limit reduction/enforcement strategies are widely judged to have the greatest estimated potential effect, but lack the widespread public acceptance needed to accomplish maximum results. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  7. Transportation Energy Futures Series. Effects of Travel Reduction and Efficient Driving on Transportation. Energy Use and Greenhouse Gas Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Porter, C. D. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); Brown, A. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); DeFlorio, J. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); McKenzie, E. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); Tao, W. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States); Vimmerstedt, L. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Golden, CO (United States)

    2013-03-01

    Since the 1970s, numerous transportation strategies have been formulated to change the behavior of drivers or travelers by reducing trips, shifting travel to more efficient modes, or improving the efficiency of existing modes. This report summarizes findings documented in existing literature to identify strategies with the greatest potential impact. The estimated effects of implementing the most significant and aggressive individual driver behavior modification strategies range from less than 1% to a few percent reduction in transportation energy use and GHG emissions. Combined strategies result in reductions of 7% to 15% by 2030. Pricing, ridesharing, eco-driving, and speed limit reduction/enforcement strategies are widely judged to have the greatest estimated potential effect, but lack the widespread public acceptance needed to accomplish maximum results. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

  8. Reduction of emissions and geological storage of CO2. Innovation an industrial stakes

    International Nuclear Information System (INIS)

    Mandil, C.; Podkanski, J.; Socolow, R.; Dron, D.; Reiner, D.; Horrocks, P.; Fernandez Ruiz, P.; Dechamps, P.; Stromberg, L.; Wright, I.; Gazeau, J.C.; Wiederkehr, P.; Morcheoine, A.; Vesseron, P.; Feron, P.; Feraud, A.; Torp, N.T.; Christensen, N.P.; Le Thiez, P.; Czernichowski, I.; Hartman, J.; Roulet, C.; Roberts, J.; Zakkour, P.; Von Goerne, G.; Armand, R.; Allinson, G.; Segalen, L.; Gires, J.M.; Metz, B.; Brillet, B.

    2005-01-01

    An international symposium on the reduction of emissions and geological storage of CO 2 was held in Paris from 15 to 16 September 2005. The event, jointly organized by IFP, ADEME and BRGM, brought together over 400 people from more than 25 countries. It was an opportunity to review the international stakes related to global warming and also to debate ways of reducing CO 2 emissions, taking examples from the energy and transport sectors. The last day was dedicated to technological advances in the capture and geological storage of CO 2 and their regulatory and economic implications. This document gathers the available transparencies and talks presented during the colloquium: Opening address by F. Loos, French Minister-delegate for Industry; Session I - Greenhouse gas emissions: the international stakes. Outlook for global CO 2 emissions. The global and regional scenarios: Alternative scenarios for energy use and CO 2 emissions until 2050 by C. Mandil and J. Podkanski (IEA), The stabilization of CO 2 emissions in the coming 50 years by R. Socolow (Princeton University). Evolution of the international context: the stakes and 'factor 4' issues: Costs of climate impacts and ways towards 'factor 4' by D. Dron (ENS Mines de Paris), CO 2 emissions reduction policy: the situation in the United States by D. Reiner (MIT/Cambridge University), Post-Kyoto scenarios by P. Horrocks (European Commission), Possibilities for R and D in CO 2 capture and storage in the future FP7 program by P. Fernandez Ruiz and P. Dechamps (European Commission). Session II - CO 2 emission reductions in the energy and transport sectors. Reducing CO 2 emissions during the production and conversion of fossil energies (fixed installations): Combined cycles using hydrogen by G. Haupt (Siemens), CO 2 emission reductions in the oil and gas industry by I. Wright (BP). Reducing CO 2 emissions in the transport sector: Sustainable transport systems by P. Wiederkehr (EST International), The prospects for reducing

  9. Environmental and economic effects of the Copenhagen pledges and more ambitious emission reduction targets

    International Nuclear Information System (INIS)

    Peterson, Everett B.; Schleich, Joachim; Duscha, Vicki

    2011-01-01

    A multi-region, multi-sector dynamic computable general equilibrium model is applied to explore the economic and welfare effects of the pledges submitted by developed countries (Annex I countries) and major developing (non-Annex I) countries for 2020 under the Copenhagen Accord. In addition to analyzing scenarios reflecting the upper and lower bounds of the Copenhagen Pledges, one additional policy scenario where Annex I countries as a group reduce CO 2 -emissions by 30% in 2020 compared to 1990 levels, and where major non-Annex I countries reduce CO 2 emissions 15% below baseline, is also analyzed. Economic effects are measured as changes in GDP compared to baseline and welfare effects are measured via the equivalent variation. Assuming that countries with emission targets may trade certificates, average reductions in GDP for countries with targets range between 0.1% and 0.7% in 2020 for the policy scenarios. While the GDP losses are larger for major non-Annex I countries with emission targets compared to Annex I countries, this is not the case for the changes in welfare. With the exception of Mexico, the welfare losses for the major non-Annex I regions, as a percentage of projected GDP in 2020, are lower than for the large Annex I countries. - Highlights: → Copenhagen pledges are not ambitious in terms of global CO 2 -emission reductions. → Copenhagen pledges are not costly in terms of global GDP or welfare losses. → Reductions in GDP and welfare in 2020 are not evenly distributed across regions.→ Major non-Annex I countries face relatively larger reductions in GDP compared with Annex I countries.→ Copenhagen pledges do not result in large amounts of carbon leakage.

  10. Carbon Emission Reduction with Regard to Retailer’s Fairness Concern and Subsidies

    Directory of Open Access Journals (Sweden)

    Linghong Zhang

    2018-04-01

    Full Text Available This paper considers the impact of consumer environmental awareness (CEA, retailer’s fairness concern, and government subsidies on the two echelon supply chain with one manufacturer and one retailer. The manufacturer produces green products with carbon emission reduction. The government provides two types of alternative subsidies: a fixed subsidy (referred to as an F-type subsidy or a discount subsidy (referred to as a D-type subsidy to encourage the manufacturer to produce a product with a high carbon emission reduction rate. We aim to provide optimal solutions to the manufacturer and the retailer with regard to the retailer’s fairness concern and government subsidies; thus we discuss four decision scenarios: the benchmark model without the fairness concern and subsidy, the model with the retailer’s fairness concern, the model with fairness concern and the F-type subsidy, and the model with fairness concern and the D-type subsidy. We provide explicit solutions and numerical examples of the optimal carbon emission reduction rate, wholesale price, and retail price. Our study has four main findings: firstly, high consumer environmental awareness will benefit both the manufacturer and the retailer in the above four scenarios; secondly, the fairness concern and subsidy have a counter effect on the optimal strategies (the subsidy could alleviate the negative influence caused by retailer’s fairness concern; thirdly, the government could subsidize the retailer when there is unfairness in the supply chain so that the manufacturer could produce a product with lower carbon emission; finally, using the subsidy related to the environmental quality will be more helpful for improving environment quality, especially when the government has a budget constraint.

  11. Modeling analysis of urea direct injection on the NOx emission reduction of biodiesel fueled diesel engines

    International Nuclear Information System (INIS)

    An, H.; Yang, W.M.; Li, J.; Zhou, D.Z.

    2015-01-01

    Highlights: • The effects of urea direct injection on NO x emissions reduction was investigated. • Aqueous urea solution was proposed to be injected after the fuel injection process. • The optimized injection strategy achieved a reduction efficiency of 58%. • There were no severe impacts on the CO emissions and BSFC. - Abstract: In this paper, a numerical simulation study was conducted to explore the possibility of an alternative approach: direct aqueous urea solution injection on the reduction of NO x emissions of a biodiesel fueled diesel engine. Simulation studies were performed using the 3D CFD simulation software KIVA4 coupled with CHEMKIN II code for pure biodiesel combustion under realistic engine operating conditions of 2400 rpm and 100% load. The chemical behaviors of the NO x formation and urea/NO x interaction processes were modeled by a modified extended Zeldovich mechanism and urea/NO interaction sub-mechanism. To ensure an efficient NO x reduction process, various aqueous urea injection strategies in terms of post injection timing, injection angle, and injection rate and urea mass fraction were carefully examined. The simulation results revealed that among all the four post injection timings (10 °ATDC, 15 °ATDC, 20 °ATDC and 25 °ATDC) that were evaluated, 15 °ATDC post injection timing consistently demonstrated a lower NO emission level. The orientation of the aqueous urea injection was also shown to play a critical role in determining the NO x removal efficiency, and 50 degrees injection angle was determined to be the optimal injection orientation which gave the most NO x reduction. In addition, both the urea/water ratio and aqueous urea injection rate demonstrated important roles which affected the thermal decomposition of urea into ammonia and the subsequent NO x removal process, and it was suggested that 50% urea mass fraction and 40% injection rate presented the lowest NO emission levels. At last, with the optimized injection

  12. Prioritizing environmental justice and equality: diesel emissions in southern California.

    Science.gov (United States)

    Marshall, Julian D; Swor, Kathryn R; Nguyen, Nam P

    2014-04-01

    Existing environmental policies aim to reduce emissions but lack standards for addressing environmental justice. Environmental justice research documents disparities in exposure to air pollution; however, little guidance currently exists on how to make improvements or on how specific emission-reduction scenarios would improve or deteriorate environmental justice conditions. Here, we quantify how emission reductions from specific sources would change various measures of environmental equality and justice. We evaluate potential emission reductions for fine diesel particulate matter (DPM) in Southern California for five sources: on-road mobile, off-road mobile, ships, trains, and stationary. Our approach employs state-of-the-science dispersion and exposure models. We compare four environmental goals: impact, efficiency, equality, and justice. Results indicate potential trade-offs among those goals. For example, reductions in train emissions produce the greatest improvements in terms of efficiency, equality, and justice, whereas off-road mobile source reductions can have the greatest total impact. Reductions in on-road emissions produce improvements in impact, equality, and justice, whereas emission reductions from ships would widen existing population inequalities. Results are similar for complex versus simplified exposure analyses. The approach employed here could usefully be applied elsewhere to evaluate opportunities for improving environmental equality and justice in other locations.

  13. Estimation and reduction of CO2 emissions from crude oil distillation units

    International Nuclear Information System (INIS)

    Gadalla, M.; Olujic, Z.; Jobson, M.; Smith, R.

    2006-01-01

    Distillation systems are energy-intensive processes, and consequently contribute significantly to the greenhouse gases emissions (e.g. carbon dioxide (CO 2 ). A simple model for the estimation of CO 2 emissions associated with operation of heat-integrated distillation systems as encountered in refineries is introduced. In conjunction with a shortcut distillation model, this model has been used to optimize the process conditions of an existing crude oil atmospheric tower unit aiming at minimization of CO 2 emissions. Simulation results indicate that the total CO 2 emissions of the existing crude oil unit can be cut down by 22%, just by changing the process conditions accordingly, and that the gain in this respect can be doubled by integrating a gas turbine. In addition, emissions reduction is accompanied by substantial profit increase due to utility saving and/or export

  14. Emissions from coal-fired electric stations : environmental health effects and reduction options

    International Nuclear Information System (INIS)

    Love, P.; Lourie, B.; Pengelly, D.; Labatt, S.; Ogilvie, K.; Kelly, B.

    1998-01-01

    Findings of a study on the environmental effects of current emissions from coal-fired electric stations were summarized. Current and projected emissions from coal-fired electric stations for five emission reduction scenarios were estimated for Ontario, Eastern Canada, Ohio Valley/Great Lakes, and the U.S. northeast regions. Coal-fired electric stations generate a wide range of environmentally significant air emissions. The five pollutants selected - sulphur dioxide, nitrogen oxides, particulate matter (less than 10 micrometres in size), mercury, and carbon dioxide - are considered to impact most on environmental health. This report focused on 312 coal-fired electric stations in the regions named above. They were selected based on the likelihood that long-range transport of the emissions from these coal-fired utilities would have an impact on human health and the environment. 55 refs., 10 tabs., 8 figs

  15. Energy use, emissions and air pollution reduction strategies in Asia

    International Nuclear Information System (INIS)

    Foell, W.; Green, C.; Amann, M.; Bhattacharya, S.; Carmichael, G.; Chadwick, M.; Cinderby, S.; Haugland, T.; Hettelingh, J.-P.; Hordijk, L.; Kuylenstierna, J.; Shah, J.; Shrestha, R.; Streets, D.; Zhao, D.

    1995-01-01

    In contrast to Europe and North America, air pollution in Asia is increasing rapidly, resulting in both local air quality problems and higher acidic depositions. In 1989, an east-west group of scientists initiated a multi-institutional research project on Acid Rain and Emissions Reduction in Asia, funded for the past two years by the World Bank and the Asian Development Bank. Phase I, covering 23 countries of Asia, focused on the development of PC-based software called the Regional Air Pollution Information and Simulation Model (RAINS-ASIA). A 94-region Regional Energy Scenario Generator was developed to create alternative energy/emission scenarios through the year 2020. A long-range atmospheric transport model was developed to calculate dispersion and deposition of sulfur, based upon emissions from area and large point sources, on a one-degree grid of Asia. The resulting impacts of acidic deposition on a variety of vegetation types were analyzed using the critical loads approach to test different emissions management strategies, including both energy conservation measures and sulfur abatement technologies. 14 refs., 7 figs

  16. Estimating the benefits of greenhouse gas emission reduction from agricultural policy reform

    International Nuclear Information System (INIS)

    Adger, W.N.; Moran, D.C.

    1993-01-01

    Land use and agricultural activities contribute directly to the increased concentrations of atmospheric greenhouse gases. Economic support in industrialized countries generally increases agriculture's contribution to global greenhouse gas concentrations through fluxes associated with land use change and other sources. Changes in economic support offers opportunities to reduce net emissions, through this so far has gone unaccounted. Estimates are presented here of emissions of methane from livestock in the UK and show that, in monetary terms, when compared to the costs of reducing support, greenhouse gases are a significant factor. As signatory parties to the Climate Change Convection are required to stabilize emissions of all greenhouse gases, options for reduction of emissions of methane and other trace gases from the agricultural sector should form part of these strategies

  17. Low Carbon Grid Study: Analysis of a 50% Emission Reduction in California

    Energy Technology Data Exchange (ETDEWEB)

    Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ehlen, Ali [Center for Energy Efficiency and Renewable Technologies, Sacramento, CA (United States); Caldwell, James H. [Center for Energy Efficiency and Renewable Technologies, Sacramento, CA (United States)

    2016-01-07

    The California 2030 Low Carbon Grid Study (LCGS) analyzes the grid impacts of a variety of scenarios that achieve 50% carbon emission reductions from California's electric power sector. Impacts are characterized based on several key operational and economic metrics, including production costs, emissions, curtailment, and impacts on the operation of gas generation and imports. The modeling results indicate that achieving a low-carbon grid (with emissions 50% below 2012 levels) is possible by 2030 with relatively limited curtailment (less than 1%) if institutional frameworks are flexible. Less flexible institutional frameworks and a less diverse generation portfolio could lead to higher curtailment (up to 10%), operational costs (up to $800 million higher), and carbon emissions (up to 14% higher).

  18. Mitigation potential of carbon dioxide emissions by management of forests in Asia

    International Nuclear Information System (INIS)

    Brown, Sandra

    1996-01-01

    Substantial areas of available forest lands in Asia could be managed for conservation and sequestration of carbon. These include 133 Mha for establishment of plantations and agroforests, 33.5 Mha for slowed tropical deforestation, and 48 Mha for natural and assisted regeneration of tropical forests. The potential quantity of C conserved and sequestered on these lands was conservatively estimated to be 24 Pg C (1 Pg = 10 15 g) by 2050. Establishment of plantations and agroforests could account for 58% of the total mitigation potential on Asian forest lands. The amount of C that could be conserved and sequestered by all forest sector practices by 2050 under baseline conditions is equivalent to about 4% of the global fossil fuel emissions over the same time period. The uncertainties in estimates of mitigation potential presented in this paper are likely to be high, particularly with respect to the land area available for forestation projects and the rate at which deforestation could be slowed. The uncertainty terms are compounded in making global estimates of the mitigation potential, perhaps to large proportions, but to what extent is presently unknown. An example of a forestry project in China whose main goal was to rehabilitate degraded lands and at the same time provide biomass fuel for the local rural inhabitants is presented to demonstrate that C sequestration, and thus mitigation, is an added benefit to more traditional uses of forests. This forestry project is currently mitigating CO 2 emissions (up to 1.4 Mg C ha -1 yr -1 ) and, with a change in management, an almost two-fold increase in the current reduction of net C emissions would occur. 33 refs, 2 figs, 2 tabs

  19. Greenhouse Emission Reductions and Natural Gas Vehicles: A Resource Guide on Technology Options and Project Development

    Energy Technology Data Exchange (ETDEWEB)

    Orestes Anastasia; NAncy Checklick; Vivianne Couts; Julie Doherty; Jette Findsen; Laura Gehlin; Josh Radoff

    2002-09-01

    Accurate and verifiable emission reductions are a function of the degree of transparency and stringency of the protocols employed in documenting project- or program-associated emissions reductions. The purpose of this guide is to provide a background for law and policy makers, urban planners, and project developers working with the many Greenhouse Gas (GHG) emission reduction programs throughout the world to quantify and/or evaluate the GHG impacts of Natural Gas Vehicle (NGVs). In order to evaluate the GHG benefits and/or penalties of NGV projects, it is necessary to first gain a fundamental understanding of the technology employed and the operating characteristics of these vehicles, especially with regard to the manner in which they compare to similar conventional gasoline or diesel vehicles. Therefore, the first two sections of this paper explain the basic technology and functionality of NGVs, but focus on evaluating the models that are currently on the market with their similar conventional counterparts, including characteristics such as cost, performance, efficiency, environmental attributes, and range. Since the increased use of NGVs, along with Alternative Fuel Vehicle (AFVs) in general, represents a public good with many social benefits at the local, national, and global levels, NGVs often receive significant attention in the form of legislative and programmatic support. Some states mandate the use of NGVs, while others provide financial incentives to promote their procurement and use. Furthermore, Federal legislation in the form of tax incentives or procurement requirements can have a significant impact on the NGV market. In order to implement effective legislation or programs, it is vital to have an understanding of the different programs and activities that already exist so that a new project focusing on GHG emission reduction can successfully interact with and build on the experience and lessons learned of those that preceded it. Finally, most programs

  20. Cycle update : advanced fuels and technologies for emissions reduction

    Energy Technology Data Exchange (ETDEWEB)

    Smallwood, G. [National Research Council of Canada, Ottawa, ON (Canada)

    2009-07-01

    This paper provided a summary of key achievements of the Program of Energy Research and Development advanced fuels and technologies for emissions reduction (AFTER) program over the funding cycle from fiscal year 2005/2006 to 2008/2009. The purpose of the paper was to inform interested parties of recent advances in knowledge and in science and technology capacities in a concise manner. The paper discussed the high level research and development themes of the AFTER program through the following 4 overarching questions: how could advanced fuels and internal combustion engine designs influence emissions; how could emissions be reduced through the use of engine hardware including aftertreatment devices; how do real-world duty cycles and advanced technology vehicles operating on Canadian fuels compare with existing technologies, models and estimates; and what are the health risks associated with transportation-related emissions. It was concluded that the main issues regarding the use of biodiesel blends in current technology diesel engines are the lack of consistency in product quality; shorter shelf life of biodiesel due to poorer oxidative stability; and a need to develop characterization methods for the final oxygenated product because most standard methods are developed for hydrocarbons and are therefore inadequate. 2 tabs., 13 figs.

  1. GHG reduction potential of changes in consumption patterns and higher quality levels: Evidence from Swiss household consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    Girod, Bastien, E-mail: bastien.girod@env.ethz.c [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstrasse 22, CHN J72.1, 8092 Zurich (Switzerland); Haan, Peter de [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstrasse 22, CHN J72.1, 8092 Zurich (Switzerland)

    2009-12-15

    An effective consumer-oriented climate policy requires knowing the GHG reduction potential of sustainable consumption. The aim of this study is to draw lessons from differences in consumption between households with high and low GHG emissions. We evaluate a survey of 14,500 households and use a method that allows measuring changes in price level of consumption. Comparing the 10% of households with the highest GHG emissions per capita with the lowest 10% - controlling for differences in expenditure level and household structure - we find a range 5-17 tons of CO{sub 2}-equivalent per capita and year. The observed differences stem mainly from heating, electricity use, car use, and travel by aircraft. Consumption patterns with low GHG emissions are characterized by less spending on mobility, but more on leisure and quality oriented consumption (leading to higher prices per unit). Further characteristics are: a higher share of organic food, low meat consumption and fewer detached single family houses. Our findings imply that a significant reduction in GHG emissions would be possible by adopting real-world consumption patterns observable in society. The twin challenge is to shift consumption towards more climate friendly patterns, and to prevent any trend towards high emitting consumption patterns.

  2. GHG reduction potential of changes in consumption patterns and higher quality levels. Evidence from Swiss household consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    Girod, Bastien; De Haan, Peter [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstrasse 22, CHN J72.1, 8092 Zurich (Switzerland)

    2009-12-15

    An effective consumer-oriented climate policy requires knowing the GHG reduction potential of sustainable consumption. The aim of this study is to draw lessons from differences in consumption between households with high and low GHG emissions. We evaluate a survey of 14,500 households and use a method that allows measuring changes in price level of consumption. Comparing the 10% of households with the highest GHG emissions per capita with the lowest 10% - controlling for differences in expenditure level and household structure - we find a range 5-17 tons of CO{sub 2}-equivalent per capita and year. The observed differences stem mainly from heating, electricity use, car use, and travel by aircraft. Consumption patterns with low GHG emissions are characterized by less spending on mobility, but more on leisure and quality oriented consumption (leading to higher prices per unit). Further characteristics are: a higher share of organic food, low meat consumption and fewer detached single family houses. Our findings imply that a significant reduction in GHG emissions would be possible by adopting real-world consumption patterns observable in society. The twin challenge is to shift consumption towards more climate friendly patterns, and to prevent any trend towards high emitting consumption patterns. (author)

  3. GHG reduction potential of changes in consumption patterns and higher quality levels: Evidence from Swiss household consumption survey

    International Nuclear Information System (INIS)

    Girod, Bastien; Haan, Peter de

    2009-01-01

    An effective consumer-oriented climate policy requires knowing the GHG reduction potential of sustainable consumption. The aim of this study is to draw lessons from differences in consumption between households with high and low GHG emissions. We evaluate a survey of 14,500 households and use a method that allows measuring changes in price level of consumption. Comparing the 10% of households with the highest GHG emissions per capita with the lowest 10% - controlling for differences in expenditure level and household structure - we find a range 5-17 tons of CO 2 -equivalent per capita and year. The observed differences stem mainly from heating, electricity use, car use, and travel by aircraft. Consumption patterns with low GHG emissions are characterized by less spending on mobility, but more on leisure and quality oriented consumption (leading to higher prices per unit). Further characteristics are: a higher share of organic food, low meat consumption and fewer detached single family houses. Our findings imply that a significant reduction in GHG emissions would be possible by adopting real-world consumption patterns observable in society. The twin challenge is to shift consumption towards more climate friendly patterns, and to prevent any trend towards high emitting consumption patterns.

  4. The importance of economies of scale for reductions in greenhouse gas emissions from shipping

    International Nuclear Information System (INIS)

    Lindstad, Haakon; Asbjørnslett, Bjørn E.; Strømman, Anders H.

    2012-01-01

    CO 2 emissions from maritime transport represent 3.3% of the world's total CO 2 emissions and are forecast to increase by 150%–250% by 2050, due to increased freight volumes (). Fulfilling anticipated climate requirements () could require the sector to reduce emissions per freight unit by a factor of five or six. The International Maritime Organization (IMO) is currently debating technical, operational and market-based measures for reducing greenhouse gas emissions from shipping. This paper also investigates the effects of economies of scale on the direct emissions and costs of maritime transport. We compared emissions from the current fleet (2007), with what can be achieved by increasing average vessel size. The comparison is based on the 2007 levels of trade and predictions for 2050. The results show that emissions can be reduced by up to 30% at a negative abatement cost per ton of CO 2 by replacing the existing fleet with larger vessels. Replacing the whole fleet might take as long as 25 years, so the reduction in emissions will be achieved gradually as the current fleet is renewed. - Highlights: ► We investigate the effects of economy of scale for reduction of GHG emissions from shipping. ► Model includes both cost and emission as function of vessel size and type. ► Model is based on operational patterns as of today for the different vessel types and sizes. ► Comparison is based on actual 2007 tonnages and foreseen 2050 levels of trading. ► Results shows that emissions can be reduced by 25%–30% at a negative abatement cost.

  5. Reducing Methane Emissions: The Other Climate Change Challenge

    International Nuclear Information System (INIS)

    Dessus, Benjamin; Laponche, Bernard

    2008-08-01

    Climate change studies show that it is vital to massively reduce atmospheric concentrations of greenhouse gases in the coming decades in order to limit the global average temperature rise ultimately to 2 or 3 deg. C and to prevent the occurrence of irreversible phenomena such as the melting of permafrost. To achieve these targets, climate experts construct scenarios estimating the changes in atmospheric concentrations of the different greenhouse gases, and determine the maximum levels that these concentrations should reach. Climate change policy targets are then set in terms of greenhouse gas emission reductions. In order to simplify the global assessment of the impact of emissions of these different greenhouse gases on global warming, the international community has adopted rules of equivalence to make it possible to take into account the emissions of non-CO_2 greenhouse gases within one single unit: the ton of CO_2 equivalent (t CO_2 eq). This is achieved by using the 'Global Warming Potential' (GWP) indicator which indicates the ratio of the respective climate impacts of a pulse emission of the greenhouse gas considered over a given period of time to a pulse emission of CO_2 of the same volume in the same year. A reference period of 100 years was defined and this means therefore that in terms of climate impacts, the emission of 1 ton of CH_4 is 'worth' the emission of 21 tons of CO_2. The study presented in this document shows that the widespread use of this equivalence to calculate not only past emissions, but also future emissions anticipated or emissions avoided over a period in the past or in the future, has led to the climate impact of CH_4 emissions being underestimated. This is because the GWP of CH_4 varies considerably depending on the period under consideration. This underestimation is accentuated even more if the respective impacts of avoided emissions of CO_2 and CH_4 are compared, either on a permanent basis or over a limited period of time. Thus

  6. Study on CO2 emission reduction using ENPEP in Korea

    International Nuclear Information System (INIS)

    Moon, K. H.; Kim, S. S.; Song, K. D.; Im, C. Y.

    2003-01-01

    ENPEP was used to analyze the role of nuclear power in mitigating carbon emission in power generation sector. In this study, base scenario reflects business as usual case in Korea. Additional two scenarios were established. One stands for fuel switch scenario, where nuclear power plants scheduled to be introduced after 2008 were assumed to be replaced by Coal Power Plant, the other one is established to see the impact of carbon tax. In this scenario carbon tax(50$/ton-C0 2 ) is imposed on coal power plants from 2008. It is resulted that fuel switch from nuclear to coal in power generation sector has a great effect on CO 2 emission, while carbon tax imposition makes a slight contribution to the reduction of CO 2 emission. These findings mean that the role of nuclear power in Korea is important in view of the GHG mitigation

  7. Environment and mobility 2050: scenarios for a 75% reduction in CO2 emissions

    International Nuclear Information System (INIS)

    Lopez-Ruiz, H.G.

    2009-10-01

    In France an objective of dividing greenhouse gas emissions by four, from the 1990 level, by 2050 has been set. Are these ambitions out of our reach? What will the price to pay for this objective be? We have built a long-term back-casting transport demand model (TILT, Transport Issues in the Long Term) . This model is centered on defined behavior types - in which the speed-GDP elasticity plays a key role - in order to determine demand estimations. This model lets us understand past tendencies - the coupling between growth and personal and freight mobility and adapt behavioral hypothesis - linked to the evolution of public policies - in order to show how a 75% reduction objective can be attained. The main results are an estimation of CO 2 emissions for the transport sector taking into account technical progress and demand. These results are presented as three scenario families named: Pegasus, Chronos and Hestia. Each family corresponds to a growing degree of constraint on mobility. It is possible to divide greenhouse gas emissions in the transport sector by four. Technical progress is able to lead to more than half of these reductions. The interest of these scenarios is to show that there exist different paths - through organizational change - to getting the other half of the reductions. (author)

  8. Implications of greenhouse gas emission mitigation scenarios for the main Asian regions

    International Nuclear Information System (INIS)

    Ruijven, Bas J. van; Vuuren, Detlef P. van; Vliet, Jasper van; Mendoza Beltran, Angelica; Deetman, Sebastiaan; Elzen, Michel G.J. den

    2012-01-01

    In order to limit global mean temperature increase, long-term greenhouse gas emissions need to be reduced. This paper discusses the implications of greenhouse gas emission reductions for major Asian regions (China, India, Indonesia, South-East Asia, Japan and Korea) based on results from the IMAGE modelling framework. Energy use in regions and economic sectors is affected differently by ambitious climate policies. We find that the potential for emission reduction varies widely between regions. With respect to technology choices in the power sector, we find major application of CO 2 storage in Indonesia and India, whereas Korea and India apply more solar and wind. Projections for Japan include a (debatable) large share of nuclear power. China and, India, and South-East Asia, show a diverse technology choice in the power sector. For the industry sector, we find that the recent rapid growth in China limits the potential for emission reduction in the next decades, assuming that recently built coal-based industry facilities are in use for the next decades. For the residential sector, the model results show that fewer households switch from traditional fuels to modern fuels in GHG mitigation scenarios. With respect to co-benefits, we find lower imports of fossil energy in mitigation scenarios and a clear reduction of air pollutant emissions. - Highlights: ► The potential for emission reduction varies widely between regions. ► Some regions have attractive CO 2 storage capacity; others have low-cost solar/wind potential. ► The recent rapid growth of Chinese industry may limit emission reduction potential for decades. ► Fewer households switch from traditional fuels to modern fuels in mitigation scenarios. ► Mitigation scenarios show less fossil energy import and reduction of air pollutant emission.

  9. A case study of the relative effects of power plant nitrogen oxides and sulfur dioxide emission reductions on atmospheric nitrogen deposition.

    Science.gov (United States)

    Vijayaraghavan, Krish; Seigneur, Christian; Bronson, Rochelle; Chen, Shu-Yun; Karamchandani, Prakash; Walters, Justin T; Jansen, John J; Brandmeyer, Jo Ellen; Knipping, Eladio M

    2010-03-01

    The contrasting effects of point source nitrogen oxides (NOx) and sulfur dioxide (SO2) air emission reductions on regional atmospheric nitrogen deposition are analyzed for the case study of a coal-fired power plant in the southeastern United States. The effect of potential emission reductions at the plant on nitrogen deposition to Escambia Bay and its watershed on the Florida-Alabama border is simulated using the three-dimensional Eulerian Community Multiscale Air Quality (CMAQ) model. A method to quantify the relative and individual effects of NOx versus SO2 controls on nitrogen deposition using air quality modeling results obtained from the simultaneous application of NOx and SO2 emission controls is presented and discussed using the results from CMAQ simulations conducted with NOx-only and SO2-only emission reductions; the method applies only to cases in which ambient inorganic nitrate is present mostly in the gas phase; that is, in the form of gaseous nitric acid (HNO3). In such instances, the individual effects of NOx and SO2 controls on nitrogen deposition can be approximated by the effects of combined NOx + SO2 controls on the deposition of NOy, (the sum of oxidized nitrogen species) and reduced nitrogen species (NHx), respectively. The benefit of controls at the plant in terms of the decrease in nitrogen deposition to Escambia Bay and watershed is less than 6% of the overall benefit due to regional Clean Air Interstate Rule (CAIR) controls.

  10. Air quality and emissions reduction initiatives at the City of Calgary

    International Nuclear Information System (INIS)

    Stone, K.

    2001-01-01

    To conserve, protect and improve the environment for the benefits of the citizens living in Calgary, the City of Calgary is committed to environmental leadership, as declared by the author as an opening statement to this Power Point presentation. The author described some of the partnerships and alliances to which the City of Calgary adheres, such as partner for climate protection program, the Federation of Canadian Municipalities and the International Council for Local Environmental Initiatives (ICLEI). The City is aiming at a 20 per cent reduction of 1990 greenhouse gas emission levels within ten years for municipal operations. The Greenhouse Gas Reduction Commitment is divided in three parts: (1) baseline inventory, (2) economic and emissions abatement assessment, and (3) implementation and each phase was explained. Phase 1 relates to an inventory of equivalent carbon dioxide as a standardized measure of greenhouse gases. Both municipal and corporate reduction targets have been identified, as well as targets for buildings. An innovative cooperative partnership with private industry has been initiated, called the energy performance contracting (EPC), where EPC provides upgraded building infrastructure with more energy efficient equipment. The entire concept was detailed. Other initiatives include green power substitutions and street lighting retrofits. The author concluded by providing a greenhouse gas reduction score sheet. Some initiatives at the community level include Web business office/Web initiatives, a public education outreach program and third party agencies. figs

  11. Applying a systems approach to assess carbon emission reductions from climate change mitigation in Mexico’s forest sector

    Science.gov (United States)

    Olguin, Marcela; Wayson, Craig; Fellows, Max; Birdsey, Richard; Smyth, Carolyn E.; Magnan, Michael; Dugan, Alexa J.; Mascorro, Vanessa S.; Alanís, Armando; Serrano, Enrique; Kurz, Werner A.

    2018-03-01

    The Paris Agreement of the United Nation Framework Convention on Climate Change calls for a balance of anthropogenic greenhouse emissions and removals in the latter part of this century. Mexico indicated in its Intended Nationally Determined Contribution and its Climate Change Mid-Century Strategy that the land sector will contribute to meeting GHG emission reduction goals. Since 2012, the Mexican government through its National Forestry Commission, with international financial and technical support, has been developing carbon dynamics models to explore climate change mitigation options in the forest sector. Following a systems approach, here we assess the biophysical mitigation potential of forest ecosystems, harvested wood products and their substitution benefits (i.e. the change in emissions resulting from substitution of wood for more emissions-intensive products and fossil fuels), for policy alternatives considered by the Mexican government, such as a net zero deforestation rate and sustainable forest management. We used available analytical frameworks (Carbon Budget Model of the Canadian Forest Sector and a harvested wood products model), parameterized with local input data in two contrasting Mexican states. Using information from the National Forest Monitoring System (e.g. forest inventories, remote sensing, disturbance data), we demonstrate that activities aimed at reaching a net-zero deforestation rate can yield significant CO2e mitigation benefits by 2030 and 2050 relative to a baseline scenario (‘business as usual’), but if combined with increasing forest harvest to produce long-lived products and substitute more energy-intensive materials, emissions reductions could also provide other co-benefits (e.g. jobs, illegal logging reduction). We concluded that the relative impact of mitigation activities is locally dependent, suggesting that mitigation strategies should be designed and implemented at sub-national scales. We were also encouraged about the

  12. Limited emission reductions from fuel subsidy removal except in energy-exporting regions

    Science.gov (United States)

    Jewell, Jessica; McCollum, David; Emmerling, Johannes; Bertram, Christoph; Gernaat, David E. H. J.; Krey, Volker; Paroussos, Leonidas; Berger, Loïc; Fragkiadakis, Kostas; Keppo, Ilkka; Saadi, Nawfal; Tavoni, Massimo; van Vuuren, Detlef; Vinichenko, Vadim; Riahi, Keywan

    2018-02-01

    Hopes are high that removing fossil fuel subsidies could help to mitigate climate change by discouraging inefficient energy consumption and levelling the playing field for renewable energy. In September 2016, the G20 countries re-affirmed their 2009 commitment (at the G20 Leaders’ Summit) to phase out fossil fuel subsidies and many national governments are using today’s low oil prices as an opportunity to do so. In practical terms, this means abandoning policies that decrease the price of fossil fuels and electricity generated from fossil fuels to below normal market prices. However, whether the removal of subsidies, even if implemented worldwide, would have a large impact on climate change mitigation has not been systematically explored. Here we show that removing fossil fuel subsidies would have an unexpectedly small impact on global energy demand and carbon dioxide emissions and would not increase renewable energy use by 2030. Subsidy removal would reduce the carbon price necessary to stabilize greenhouse gas concentration at 550 parts per million by only 2-12 per cent under low oil prices. Removing subsidies in most regions would deliver smaller emission reductions than the Paris Agreement (2015) climate pledges and in some regions global subsidy removal may actually lead to an increase in emissions, owing to either coal replacing subsidized oil and natural gas or natural-gas use shifting from subsidizing, energy-exporting regions to non-subsidizing, importing regions. Our results show that subsidy removal would result in the largest CO2 emission reductions in high-income oil- and gas-exporting regions, where the reductions would exceed the climate pledges of these regions and where subsidy removal would affect fewer people living below the poverty line than in lower-income regions.

  13. Limited emission reductions from fuel subsidy removal except in energy-exporting regions.

    Science.gov (United States)

    Jewell, Jessica; McCollum, David; Emmerling, Johannes; Bertram, Christoph; Gernaat, David E H J; Krey, Volker; Paroussos, Leonidas; Berger, Loïc; Fragkiadakis, Kostas; Keppo, Ilkka; Saadi, Nawfal; Tavoni, Massimo; van Vuuren, Detlef; Vinichenko, Vadim; Riahi, Keywan

    2018-02-07

    Hopes are high that removing fossil fuel subsidies could help to mitigate climate change by discouraging inefficient energy consumption and levelling the playing field for renewable energy. In September 2016, the G20 countries re-affirmed their 2009 commitment (at the G20 Leaders' Summit) to phase out fossil fuel subsidies and many national governments are using today's low oil prices as an opportunity to do so. In practical terms, this means abandoning policies that decrease the price of fossil fuels and electricity generated from fossil fuels to below normal market prices. However, whether the removal of subsidies, even if implemented worldwide, would have a large impact on climate change mitigation has not been systematically explored. Here we show that removing fossil fuel subsidies would have an unexpectedly small impact on global energy demand and carbon dioxide emissions and would not increase renewable energy use by 2030. Subsidy removal would reduce the carbon price necessary to stabilize greenhouse gas concentration at 550 parts per million by only 2-12 per cent under low oil prices. Removing subsidies in most regions would deliver smaller emission reductions than the Paris Agreement (2015) climate pledges and in some regions global subsidy removal may actually lead to an increase in emissions, owing to either coal replacing subsidized oil and natural gas or natural-gas use shifting from subsidizing, energy-exporting regions to non-subsidizing, importing regions. Our results show that subsidy removal would result in the largest CO 2 emission reductions in high-income oil- and gas-exporting regions, where the reductions would exceed the climate pledges of these regions and where subsidy removal would affect fewer people living below the poverty line than in lower-income regions.

  14. Electricity price, energy production and emissions impact : evaluating proposed GHG emission reduction frameworks for the Alberta electricity industry : updated reference case and sensitivity results prepared for CASA EPT Greenhouse Gas Allocation Subgroup

    International Nuclear Information System (INIS)

    2004-01-01

    This document presents the results of a study which quantified the potential impact of various greenhouse gas (GHG) policy scenarios on Alberta generators' energy production, airborne emissions and electricity wholesale market price. The study examined proactive policy frameworks compared to business as usual scenarios. A reference case scenario was included to represent the status quo environment where electricity demand continues on its current path. Five additional sensitivity cases were examined, of which 3 evaluated the impact of many key assumptions regarding progressive GHG reduction levels and costs related to meeting GHG requirements. The other two evaluated an all-coal future electricity supply both with and without GHG emission reduction costs. Environmental costs were also evaluated in terms of emissions of nitrous oxides, sulphurous oxides, mercury and particulate matter. The impact of generation retirement and renewable energy source development was also analyzed. Demand and supply forecasts for oil, natural gas, electric energy and energy sales were presented along with generation supply forecasts for the reference case scenario, coal generation and natural gas fired retirements. refs., tabs., figs

  15. Meat consumption reduction in Italian regions: Health co-benefits and decreases in GHG emissions.

    Science.gov (United States)

    Farchi, Sara; De Sario, Manuela; Lapucci, Enrica; Davoli, Marina; Michelozzi, Paola

    2017-01-01

    Animal agriculture has exponentially grown in recent decades in response to the rise in global demand for meat, even in countries like Italy that traditionally eat a Mediterranean, plant-based diet. Globalization related dietary changes are contributing to the epidemic of non-communicable diseases and to the global climate crisis, and are associated with huge carbon and water footprints. The objective of the study is to assess inequalities in health impacts and in attributable greenhouse gases-GHG emissions in Italy by hypothesizing different scenarios of reduction in red and processed meat consumption towards healthier consumption patterns more compliant with the recommendations of the Mediterranean food pyramid. We used demographic and food consumption patterns from national surveys and risk relationships between meat intake and cardiovascular and colorectal cancer mortality from IARC and other meta-analyses. From the baseline data (year 2005-2006, average 406 gr/week beef and 245 gr/week processed meat), we considered hypothetical meat reduction scenarios according to international dietary guidelines such as the Mediterranean pyramid targets. For each geographical area (Northwest, Northeast, Centre, and South) and gender, we calculated the number of avoidable deaths from colorectal cancer, and cardiovascular disease among the adult population. Moreover, years of life gained by the adult population from 2012 to 2030 and changes in life expectancy of the 2012 birth cohort were quantified using gender-specific life tables. GHG emission reductions under Mediterranean scenario were estimated only for beef by applying the Global Warming Potential (GWP) coefficient to total consumption and to a low carbon food substitution in adult diet. The deaths avoidable (as percentage change compared to baseline) according to the three reduction scenarios for beef consumption were between 2.3% and 4.5% for colorectal cancer, and between 2.1% and 4.0% for cardiovascular disease

  16. Meat consumption reduction in Italian regions: Health co-benefits and decreases in GHG emissions.

    Directory of Open Access Journals (Sweden)

    Sara Farchi

    Full Text Available Animal agriculture has exponentially grown in recent decades in response to the rise in global demand for meat, even in countries like Italy that traditionally eat a Mediterranean, plant-based diet. Globalization related dietary changes are contributing to the epidemic of non-communicable diseases and to the global climate crisis, and are associated with huge carbon and water footprints. The objective of the study is to assess inequalities in health impacts and in attributable greenhouse gases-GHG emissions in Italy by hypothesizing different scenarios of reduction in red and processed meat consumption towards healthier consumption patterns more compliant with the recommendations of the Mediterranean food pyramid.We used demographic and food consumption patterns from national surveys and risk relationships between meat intake and cardiovascular and colorectal cancer mortality from IARC and other meta-analyses. From the baseline data (year 2005-2006, average 406 gr/week beef and 245 gr/week processed meat, we considered hypothetical meat reduction scenarios according to international dietary guidelines such as the Mediterranean pyramid targets. For each geographical area (Northwest, Northeast, Centre, and South and gender, we calculated the number of avoidable deaths from colorectal cancer, and cardiovascular disease among the adult population. Moreover, years of life gained by the adult population from 2012 to 2030 and changes in life expectancy of the 2012 birth cohort were quantified using gender-specific life tables. GHG emission reductions under Mediterranean scenario were estimated only for beef by applying the Global Warming Potential (GWP coefficient to total consumption and to a low carbon food substitution in adult diet.The deaths avoidable (as percentage change compared to baseline according to the three reduction scenarios for beef consumption were between 2.3% and 4.5% for colorectal cancer, and between 2.1% and 4.0% for

  17. Steering levies on the purchase of new cars for the reduction of CO2 emissions

    International Nuclear Information System (INIS)

    Haan, P. de; Mueller, M.; Peters, A.; Hauser, A.

    2007-12-01

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) takes a look at the background, mechanisms and prognoses for the reduction of CO 2 emissions of new cars. This report focuses on policy measures - specifically the collection of budget-neutral so-called 'feebates' - that aim to influence the behaviour of buyers of new cars as a means of enhancing energy efficiency and reducing CO 2 emissions. Both the European Union and Switzerland are pursuing a three-pillar strategy in which agreements with manufacturers and importers (pillar 1) are supplemented by the provision of more detailed information for customers in the form of energy labels for new vehicles as well as catalogues listing levels of fuel consumption (pillar 2). Pillar 3 concerns measures aimed at influencing car buying behaviour, generally based on the use of the energy label for new vehicles in order to realise the existing potentials for reducing CO 2 emissions. The report takes a look at Switzerland's car market, buying behaviour, information on efficient vehicles, acceptance factors and incentive schemes. The findings of the study are presented and commented on.

  18. Possible pathways for dealing with Japan's post-Fukushima challenge and achieving CO2 emission reduction targets in 2030

    International Nuclear Information System (INIS)

    Su, Xuanming; Zhou, Weisheng; Sun, Faming; Nakagami, Ken'Ichi

    2014-01-01

    Considering the unclear nuclear future of Japan after Fukushima Dai-ichi nuclear power plant accident since Mar. 11, 2011, this study assesses a series of energy consumption scenarios including the reference scenario, nuclear limited scenarios and current nuclear use level scenario for Japan in 2030 by the G-CEEP (Glocal Century Energy Environment Planning) model. The simulation result for each scenario is firstly presented in terms of primary energy consumption, electricity generation, CO 2 emission, marginal abatement cost and GDP (gross domestic product) loss. According to the results, energy saving contributes the biggest share in total CO 2 emission reduction, regardless of different nuclear use levels and different CO 2 emission reduction levels. A certain amount of coal generation can be retained in the nuclear limited scenarios due to the applying of CCS (carbon capture and storage). The discussion indicates that Japan needs to improve energy use efficiency, increase renewable energy and introduce CCS in order to reduce the dependence on nuclear power and to achieve CO 2 emission reduction target in 2030. In addition, it is ambitious for Japan to achieve the zero nuclear scenario with 30% CO 2 emission reduction which will cause a marginal abatement cost of 383 USD/tC and up to −2.54% GDP loss from the reference scenario. Dealing with the nuclear power issue, Japan is faced with a challenge as well as an opportunity. - Highlights: • Nuclear use limited and carbon emission reduction scenarios for Japan in 2030. • Contributions of different abatement options to carbon emissions. • CCS for reducing dependence on nuclear power

  19. Reduction of greenhouse gas emission on a medium-pressure boiler using hydrogen-rich fuel control

    International Nuclear Information System (INIS)

    Hsieh, S.-C.; Jou, Chih-Ju G.

    2007-01-01

    The increasing emission of greenhouse gases from the combustion of fossil fuel is believed to be responsible for global warming. A study was carried out to probe the influence of replacing fuel gas with hydrogen-rich refinery gas (R.G.) on the reduction of gas emission (CO 2 and NO x ) and energy saving. Test results show that the emission of CO 2 can be reduced by 16.4% annually (or 21,500 tons per year). The NO x emission can be 8.2% lower, or 75 tons less per year. Furthermore, the use of refinery gas leads to a saving of NT$57 million (approximately US$1.73 million) on fuel costs each year. There are no CO 2 , CO, SO x , unburned hydrocarbon, or particles generated from the combustion of added hydrogen. The hydrogen content in R.G. employed in this study was between 50 and 80 mol%, so the C/H ratio of the feeding fuel was reduced. Therefore, the use of hydrogen-rich fuel has practical benefits for both energy saving and the reduction of greenhouse gas emission

  20. An empirical study on the institutional factors of energy conservation and emissions reduction: Evidence from listed companies in China

    International Nuclear Information System (INIS)

    Zhang, Zhaoguo; Jin, Xiaocui; Yang, Qingxiang; Zhang, Yi

    2013-01-01

    Corporate excessive energy consumption and emissions are negative externality problems, with the basic countermeasure of establishing a series of institutional programs to promote corporate energy conservation and emissions reduction. This paper analyzes the influence of institutional factors such as laws, tax policies, credit policies, government subsidies, media supervision and marketization degree on corporate energy conservation and emissions reduction from the institutional perspective. The data, from 84 listed Chinese chemical and steel companies from 2006 to 2010, was analyzed using both a fixed effect model and the generalized method of moments (GMM) model. The empirical results demonstrate that these institutional factors positively affect corporate energy conservation and emissions reduction. Specifically, four factors – tax policies, government subsidies, credit policies and media supervision – have a significant positive relationship with corporate energy conservation and emissions reduction; whereas laws and marketization degree exhibit no significant effects. The research findings are theoretically and practically significant to the Chinese government with regard to improving the institutional environment and promoting corporate energy conservation and emissions reduction. - Highlights: ► Theoretical analysis of the influence of institutional factors based on NIE. ► Empirical analysis of the influence of institutional factors on ECER by regression. ► Economic measures and public opinions have positive influence on ECER in China. ► Laws and the degree of marketization have weak influence on ECER in China

  1. Pollution reduction technology program for small jet aircraft engines, phase 1

    Science.gov (United States)

    Bruce, T. W.; Davis, F. G.; Kuhn, T. E.; Mongia, H. C.

    1977-01-01

    A series of combustor pressure rig screening tests was conducted on three combustor concepts applied to the TFE731-2 turbofan engine combustion system for the purpose of evaluating their relative emissions reduction potential consistent with prescribed performance, durability, and envelope contraints. The three concepts and their modifications represented increasing potential for reducing emission levels with the penalty of increased hardware complexity and operational risk. Concept 1 entailed advanced modifications to the present production TFE731-2 combustion system. Concept 2 was based on the incorporation of an axial air-assisted airblast fuel injection system. Concept 3 was a staged premix/prevaporizing combustion system. Significant emissions reductions were achieved in all three concepts, consistent with acceptable combustion system performance. Concepts 2 and 3 were identified as having the greatest achievable emissions reduction potential, and were selected to undergo refinement to prepare for ultimate incorporation within an engine.

  2. Numerical investigation of the efficiency of emission reduction and heat extraction in a sedimentary geothermal reservoir: a case study of the Daming geothermal field in China.

    Science.gov (United States)

    Guo, Xuyang; Song, Hongqing; Killough, John; Du, Li; Sun, Pengguang

    2018-02-01

    The utilization of geothermal energy is clean and has great potential worldwide, and it is important to utilize geothermal energy in a sustainable manner. Mathematical modeling studies of geothermal reservoirs are important as they evaluate and quantify the complex multi-physical effects in geothermal reservoirs. However, previous modeling efforts lack the study focusing on the emission reduction efficiency and the deformation at geothermal wellbores caused by geothermal water extraction/circulation. Emission efficiency is rather relevant in geothermal projects introduced in areas characterized by elevated air pollution where the utilization of geothermal energy is as an alternative to burning fossil fuels. Deformation at geothermal wellbores is also relevant as significant deformation caused by water extraction can lead to geothermal wellbore instability and can consequently decrease the effectiveness of the heat extraction process in geothermal wells. In this study, the efficiency of emission reduction and heat extraction in a sedimentary geothermal reservoir in Daming County, China, are numerically investigated based on a coupled multi-physical model. Relationships between the efficiency of emission reduction and heat extraction, deformation at geothermal well locations, and geothermal field parameters including well spacing, heat production rate, re-injection temperature, rock stiffness, and geothermal well placement patterns are analyzed. Results show that, although large heat production rates and low re-injection temperatures can lead to decreased heat production in the last 8 years of heat extraction, they still improve the overall heat production capacity and emission reduction capacity. Also, the emission reduction capacity is positively correlated with the heat production capacity. Deformation at geothermal wellbore locations is alleviated by smaller well spacing, lower heat production rates, and smaller numbers of injectors in the well pattern, and by

  3. Emission reductions through precombustion chamber design in a natural gas, lean burn engine

    International Nuclear Information System (INIS)

    Crane, M.E.; King, S.R.

    1992-01-01

    A study was conducted to evaluate the effects of various precombustion chamber design, operating and control parameters on the exhaust emissions of a natural gas engine. Analysis of the results showed that engine-out total hydrocarbons and oxides of nitrogen (NO x ) can be reduced, relative to conventional methods, through prechamber design. More specifically, a novel staged prechamber yielded significant reductions in NO x and total hydrocarbon emissions by promoting stable prechamber and main chamber ignition under fuel-lean conditions. Precise fuel control was also critical when balancing low emissions and engine efficiency (i.e., fuel economy). The purpose of this paper is to identify and explain positive and deleterious effects of natural gas prechamber design on exhaust emissions

  4. Estimating energy intensity and CO{sub 2} emission reduction potentials in the manufacturing sectors in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Wangskarn, P.; Khummongkol, P.; Schrattenholzer, L. [and others

    1996-12-31

    The final energy consumption in Thailand increased at about ten percent annually within the last 10 years. To slow the energy demand growth rate while maintaining the country`s economic advance and environmental sustainability, the Energy Conservation Promotion Act (ECPA) was adopted in 1992. With this Act, a comprehensive Energy Conservation Program (ENCON) was initiated. ENCON commits the government to promoting energy conservation, to developing appropriate regulations, and to providing financial and organizational resources for program implementation. Due to this existing ENCON program a great benefit is expected not only to reducing energy consumption, but also to decreasing GHGs emissions substantially. This study is a part of the ENCON research program which was supported by the German Federal Government under the program called Prompt-Start Measures to Implement the U.N. Framework Convention on Climate Change (FCCC). The basic activities carried out during the project included (1) An assessment of Thailand`s total and specific energy consumption in the industrial sectors and commercial buildings; (2) Identification of existing and candidate technologies for GHG emission reduction and energy efficiency improvements in specific factories and commercial buildings; and (3) Identification of individual factories and commercial buildings as candidates for detailed further study. Although the energy assessment had been carried out for the commercial buildings also, this paper will cover only the work on the manufacturing sector. On the basis of these steps, 14 factories were visited by the project team and preliminary energy audits were performed. As a result, concrete measures and investments were proposed and classified into two groups according to their economic characteristics. Those investments with a payback time of less than four years were considered together in a Moderate scenario, and those with longer payback times in an Intensive scenario.

  5. Energy reduction potential from the shift to electric vehicles: The Flores island case study

    International Nuclear Information System (INIS)

    Pina, André; Baptista, Patrícia; Silva, Carlos; Ferrão, Paulo

    2014-01-01

    The increase of fossil fuel demand raises concerns on availability of resources for future energy demand and on potential environmental impacts. Electric vehicles (EVs) appear as one alternative to shift from fossil fuels to renewable energy resources. This research work analyzes the benefits of the introduction of EVs in a small energy system, the Flores island, Azores, in terms of primary energy and CO 2 emissions. Four scenarios were designed considering different penetration rates of EVs (Low and High) and different time of recharging strategies (Fixed and Flexible). The high shares of RES in the electricity production system (60–62%) did not guarantee a significant use of RES for the recharging of EVs (10–40%), as the additional electricity required had to be produced mainly from the diesel generators. The flexible recharging strategies allowed doubling the share of RES in the recharging of the EVs when compared to fixed recharging, and consequently double the impact on the reduction of primary energy consumption and fossil fuels imports. While the reduction of primary energy ranged between 0.2% and 1.1%, for CO 2 emissions there was a decrease between 0.3 and 1.7%, proving that EVs can help improve the sustainability of energy systems. - highlights: • High shares of RES in electricity do not guarantee a low energy use by EVs. • The introduction of EVs can help reduce CO 2 emissions by 11% in 2030. • Flexible time of recharging strategies allows a 2.5 times higher share of RES

  6. Potential of European 14CO2 observation network to estimate the fossil fuel CO2 emissions via atmospheric inversions

    Science.gov (United States)

    Wang, Yilong; Broquet, Grégoire; Ciais, Philippe; Chevallier, Frédéric; Vogel, Felix; Wu, Lin; Yin, Yi; Wang, Rong; Tao, Shu

    2018-03-01

    Combining measurements of atmospheric CO2 and its radiocarbon (14CO2) fraction and transport modeling in atmospheric inversions offers a way to derive improved estimates of CO2 emitted from fossil fuel (FFCO2). In this study, we solve for the monthly FFCO2 emission budgets at regional scale (i.e., the size of a medium-sized country in Europe) and investigate the performance of different observation networks and sampling strategies across Europe. The inversion system is built on the LMDZv4 global transport model at 3.75° × 2.5° resolution. We conduct Observing System Simulation Experiments (OSSEs) and use two types of diagnostics to assess the potential of the observation and inverse modeling frameworks. The first one relies on the theoretical computation of the uncertainty in the estimate of emissions from the inversion, known as posterior uncertainty, and on the uncertainty reduction compared to the uncertainty in the inventories of these emissions, which are used as a prior knowledge by the inversion (called prior uncertainty). The second one is based on comparisons of prior and posterior estimates of the emission to synthetic true emissions when these true emissions are used beforehand to generate the synthetic fossil fuel CO2 mixing ratio measurements that are assimilated in the inversion. With 17 stations currently measuring 14CO2 across Europe using 2-week integrated sampling, the uncertainty reduction for monthly FFCO2 emissions in a country where the network is rather dense like Germany, is larger than 30 %. With the 43 14CO2 measurement stations planned in Europe, the uncertainty reduction for monthly FFCO2 emissions is increased for the UK, France, Italy, eastern Europe and the Balkans, depending on the configuration of prior uncertainty. Further increasing the number of stations or the sampling frequency improves the uncertainty reduction (up to 40 to 70 %) in high emitting regions, but the performance of the inversion remains limited over low

  7. Potential of European 14CO2 observation network to estimate the fossil fuel CO2 emissions via atmospheric inversions

    Directory of Open Access Journals (Sweden)

    Y. Wang

    2018-03-01

    Full Text Available Combining measurements of atmospheric CO2 and its radiocarbon (14CO2 fraction and transport modeling in atmospheric inversions offers a way to derive improved estimates of CO2 emitted from fossil fuel (FFCO2. In this study, we solve for the monthly FFCO2 emission budgets at regional scale (i.e., the size of a medium-sized country in Europe and investigate the performance of different observation networks and sampling strategies across Europe. The inversion system is built on the LMDZv4 global transport model at 3.75°  ×  2.5° resolution. We conduct Observing System Simulation Experiments (OSSEs and use two types of diagnostics to assess the potential of the observation and inverse modeling frameworks. The first one relies on the theoretical computation of the uncertainty in the estimate of emissions from the inversion, known as posterior uncertainty, and on the uncertainty reduction compared to the uncertainty in the inventories of these emissions, which are used as a prior knowledge by the inversion (called prior uncertainty. The second one is based on comparisons of prior and posterior estimates of the emission to synthetic true emissions when these true emissions are used beforehand to generate the synthetic fossil fuel CO2 mixing ratio measurements that are assimilated in the inversion. With 17 stations currently measuring 14CO2 across Europe using 2-week integrated sampling, the uncertainty reduction for monthly FFCO2 emissions in a country where the network is rather dense like Germany, is larger than 30 %. With the 43 14CO2 measurement stations planned in Europe, the uncertainty reduction for monthly FFCO2 emissions is increased for the UK, France, Italy, eastern Europe and the Balkans, depending on the configuration of prior uncertainty. Further increasing the number of stations or the sampling frequency improves the uncertainty reduction (up to 40 to 70 % in high emitting regions, but the performance of the inversion

  8. Co-benefits from CO{sub 2}-emission reduction measurements in Shanxi, China - a first assessment

    Energy Technology Data Exchange (ETDEWEB)

    Aunan, Kristin; Fang, Jinghua; Li, Guanghai; Seip, Hans Martin; Vennemo, Haakon

    2000-05-01

    The largest local and regional air pollution problems are usually found in countries without emission reduction obligations in the Kyoto protocol. Thus, in many Chinese cities the concentrations of SO{sub 2} and particulates in the air by far exceed the WHO air quality guidelines. This report analyses a set of CO{sub 2}-reducing abatement options related to coal consumption in Shanxi, China. The costs and potential for abatement are investigated for different economic sectors and the entailed emission reductions are estimated in terms of CO{sub 2}, SO{sub 2} and particles. The present population-weighted exposure level for particles and SO{sub 2} is estimated and the reduced population exposure resulting from the abatement measures is assessed. Exposure-response functions from Chinese and international epidemiology are used to indicate the health effects of applying the measures. An economic evaluation of the reduced health effect is made by applying unit prices of health impacts based on the damage cost approach. The present agricultural crop loss due to enhanced levels of surface ozone are estimated. It is found that the CO{sub 2}-reducing abatement options in Shanxi are profitable in a socioeconomic sense. But there is a certain lack of synergy between the options with respect to their effectiveness in meeting local, regional and global environmental concerns.

  9. Incentives for subcontractors to adopt CO2 emission reporting and reduction techniques

    International Nuclear Information System (INIS)

    Scholtens, Bert; Kleinsmann, Renske

    2011-01-01

    We investigate the incentives for subcontractors (couriers) of a transport and logistics company to report about their CO 2 emissions and to implement CO 2 reducing technologies. Furthermore, we try to find out whether these incentives differ between British and Dutch couriers. We find that several incentives play a significant role. Subcontractors in the Netherlands predominantly are extrinsically motivated to engage in CO 2 reporting and reduction techniques. This is because they are mainly driven by regulatory compliance, energy costs and implementation costs. In contrast, British subcontractors are much more intrinsically motivated to comply. They are predominantly driven by energy costs, environmental awareness, relationship building and reputation building. The contractor will have to account for these differences in making its policies work. - Research highlights: → We investigate incentives for couriers to report CO 2 emissions and to implement CO 2 reduction techniques. → We compare couriers in the Netherlands and the United Kingdom. → Several incentives are significant for the adoption of CO 2 reporting and reduction measures. → There are significant differences in the sensitivity for incentives in the Netherlands and the UK.

  10. 4-aminopyridine in scala media reversibly alters the cochlear potentials and suppresses electrically evoked oto-acoustic emissions.

    Science.gov (United States)

    Kirk, D L; Yates, G K

    1998-01-01

    Iontophoresis of 4-aminopyridine into scala media of the guinea pig cochlea caused elevation of the thresholds of the compound action potential of the auditory nerve, loss of amplitude of the extracellular cochlear microphonic response (CM), increase in the endocochlear potential (EP) and reduction in the amplitude of electrically evoked oto-acoustic emissions (EEOAEs). These changes were reversible over 10-20 min. The reciprocity of the changes in the CM and the EP was consistent with an interruption of both DC and AC currents through outer hair cells (OHCs), probably by blockade of mechano-electrical transduction (MET) channels in OHCs. Reductions in EEOAEs were consistent with the extrinsically applied generating current entering the OHC via the MET channels. Implications for the activation of OHC electromotility in vivo are discussed.

  11. Energy-related CO_2 emission in European Union agriculture: Driving forces and possibilities for reduction

    International Nuclear Information System (INIS)

    Li, Tianxiang; Baležentis, Tomas; Makutėnienė, Daiva; Streimikiene, Dalia; Kriščiukaitienė, Irena

    2016-01-01

    behind declines in CO_2 emission. According to the SBM, the lowest carbon shadow prices are observed in France, Finland, Sweden, Denmark, the Netherlands, Poland, and Belgium. These countries thus have the highest potential for reduction in CO_2 emission. The results imply that measures to increase energy efficiency are a more effective means to reduce CO_2 emissions than are changes in the fuel-mix.

  12. Simulation scenarios for rapid reduction in carbon dioxide emissions in the western electricity system

    International Nuclear Information System (INIS)

    Ford, Andrew

    2008-01-01

    This paper describes a computer simulation analysis of carbon dioxide emissions in the electric power system in the western United States. Legislation at both the state and federal level would impose a price on emissions via cap-and-trade in allowances for carbon dioxide emissions. The simulation scenarios for the western system indicate that dramatic reductions in emissions are possible with generating technologies that exist today. Wind and biomass generators play a key role even with conservative assumptions about their future costs. In contrast, generation from advanced technologies provide only a minor contribution by the year 2025. These scenarios provide support to those who argue that the US should move expeditiously to put a price on carbon dixoide emissions

  13. Assessment of emission scenarios for 2030 and impacts of black carbon emission reduction measures on air quality and radiative forcing in Southeast Asia

    Directory of Open Access Journals (Sweden)

    D. A. Permadi

    2018-03-01

    Full Text Available Our previously published paper (Permadi et al. 2018 focused on the preparation of emission input data and evaluation of WRF–CHIMERE performance in 2007. This paper details the impact assessment of the future (2030 black carbon (BC emission reduction measures for Southeast Asia (SEA countries on air quality, health and BC direct radiative forcing (DRF. The business as usual (BAU2030 projected emissions from the base year of 2007 (BY2007, assuming no intervention with the linear projection of the emissions based on the past activity data for Indonesia and Thailand and the sectoral GDP growth for other countries. The RED2030 featured measures to cut down emissions in major four source sectors in Indonesia and Thailand (road transport, residential cooking, industry, biomass open burning while for other countries the Representative Concentration Pathway 8.5 (RCP8.5 emissions were assumed. WRF–CHIMERE simulated levels of aerosol species under BAU2030 and RED2030 for the modeling domain using the base year meteorology and 2030 boundary conditions from LMDZ-INCA. The extended aerosol optical depth module (AODEM calculated the total columnar AOD and BC AOD for all scenarios with an assumption on the internal mixing state. Under RED2030, the health benefits were analyzed in terms of the number of avoided premature deaths associated with ambient PM2.5 reduction along with BC DRF reduction. Under BAU2030, the average number of the premature deaths per 100 000 people in the SEA domain would increase by 30 from BY2007 while under RED2030 the premature deaths would be cut down (avoided by 63 from RED2030. In 2007, the maximum annual average BC DRF in the SEA countries was 0.98 W m−2, which would increase to 2.0 W m−2 under BAU2030 and 1.4 W m−2 under RED2030. Substantial impacts on human health and BC DRF reduction in SEA could result from the emission measures incorporated in RED2030. Future works should consider other impacts, such

  14. Assessment of emission scenarios for 2030 and impacts of black carbon emission reduction measures on air quality and radiative forcing in Southeast Asia

    Science.gov (United States)

    Agustian Permadi, Didin; Oanh, Nguyen Thi Kim; Vautard, Robert

    2018-03-01

    Our previously published paper (Permadi et al. 2018) focused on the preparation of emission input data and evaluation of WRF-CHIMERE performance in 2007. This paper details the impact assessment of the future (2030) black carbon (BC) emission reduction measures for Southeast Asia (SEA) countries on air quality, health and BC direct radiative forcing (DRF). The business as usual (BAU2030) projected emissions from the base year of 2007 (BY2007), assuming no intervention with the linear projection of the emissions based on the past activity data for Indonesia and Thailand and the sectoral GDP growth for other countries. The RED2030 featured measures to cut down emissions in major four source sectors in Indonesia and Thailand (road transport, residential cooking, industry, biomass open burning) while for other countries the Representative Concentration Pathway 8.5 (RCP8.5) emissions were assumed. WRF-CHIMERE simulated levels of aerosol species under BAU2030 and RED2030 for the modeling domain using the base year meteorology and 2030 boundary conditions from LMDZ-INCA. The extended aerosol optical depth module (AODEM) calculated the total columnar AOD and BC AOD for all scenarios with an assumption on the internal mixing state. Under RED2030, the health benefits were analyzed in terms of the number of avoided premature deaths associated with ambient PM2.5 reduction along with BC DRF reduction. Under BAU2030, the average number of the premature deaths per 100 000 people in the SEA domain would increase by 30 from BY2007 while under RED2030 the premature deaths would be cut down (avoided) by 63 from RED2030. In 2007, the maximum annual average BC DRF in the SEA countries was 0.98 W m-2, which would increase to 2.0 W m-2 under BAU2030 and 1.4 W m-2 under RED2030. Substantial impacts on human health and BC DRF reduction in SEA could result from the emission measures incorporated in RED2030. Future works should consider other impacts, such as for agricultural crop production

  15. Photochemical modelling of photo-oxidant levels over the Swiss plateau and emission reduction scenarios

    International Nuclear Information System (INIS)

    Rosselet, C.M.; Kerr, J.A.

    1993-05-01

    During summertime high pressure conditions, high photo-oxidant (O 3 , H 2 O 2 , PAN and others) levels are frequently observed in the planetary boundary layer in central Europe. It is well known that close to the earth's surface ozone is formed by complex reactions involving VOC, NO x , and sunlight. Substantial reductions of both precursors are needed to reduce photo-oxidant levels. In this context the reductions of the abundance of the precursors and the variation of their ratios is of great importance. Here we report model calculations from the Harwell Photochemical Trajectory Model of the levels of O 3 , H 2 O 2 and PAN along a trajectory over the Swiss Plateau from Lake Constance to Lake Geneva. These calculations are in satisfactory agreement with measurements made during the intensive observation period of the research program POLLUMET (Pollution and Meteorology in Switzerland). Sensitivity calculations of emission reduction scenarios indicate that on the Swiss Plateau the ozone production may be mainly NO x -limited; under conditions where the CO levels are closer to the upper limit within the range (120-600 ppbv). The calculated peak ozone level reduction caused by an exclusive NO x -emission reduction is about three times larger than that caused by an exclusive VOC reduction. The combined reduction of all precursor compounds is the most efficient strategy, although it is only marginally more efficient than the NO x -reduction scenario alone. (author) figs., tabs., 75 refs

  16. Technical analysis on energy conservation and emission reduction of new energy electric vehicle in China

    Science.gov (United States)

    Zheng, Chaocheng

    2017-10-01

    With the global environmental problems and energy crisis continuously emerging, all countries are taking active measures to achieve the benign development of domestic economy and society. Vehicle, as a large oil consumption and emissions of carbon dioxide, nend to be a revolutionary change. Therefore, the development of new energy electric vehicle has become the consensus of the world. On this background, this paper has sorted out the current state and the related development planning of new energy electric vehicles in different countries to predict the car ownership of the new energy electric vehicles using elastic coefficient method and setting different path of development, conclude that under the consideration of energy conservation and emissions reduction factors, our country should mainly promote the BEV to realize the maximum energy conservation and emissions reduction.

  17. Reductions in energy use and environmental emissions achievable with utility-based cogeneration: Simplified illustrations for Ontario

    International Nuclear Information System (INIS)

    Rosen, M.A.

    1998-01-01

    Significant reductions in energy use and environmental emissions are demonstrated to be achievable when electrical utilities use cogeneration. Simplified illustrations of these reductions are presented for the province of Ontario, based on applying cogeneration to the facilities of the main provincial electrical utility. Three cogeneration illustrations are considered: (i) fuel cogeneration is substituted for fuel electrical generation and fuel heating, (ii) nuclear cogeneration is substituted for nuclear electrical generation and fuel heating, and (iii) fuel cogeneration is substituted for fuel electrical generation and electrical heating. The substitution of cogeneration for separate electrical and heat generation processes for all illustrations considered leads to significant reductions in fuel energy consumption (24-61%), which lead to approximately proportional reductions in emissions. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

  18. DEMONSTRATION OF AN ADVANCED INTEGRATED CONTROL SYSTEM FOR SIMULTANEOUS EMISSIONS REDUCTION

    Energy Technology Data Exchange (ETDEWEB)

    Suzanne Shea; Randhir Sehgal; Ilga Celmins; Andrew Maxson

    2002-02-01

    The primary objective of the project titled ''Demonstration of an Advanced Integrated Control System for Simultaneous Emissions Reduction'' was to demonstrate at proof-of-concept scale the use of an online software package, the ''Plant Environmental and Cost Optimization System'' (PECOS), to optimize the operation of coal-fired power plants by economically controlling all emissions simultaneously. It combines physical models, neural networks, and fuzzy logic control to provide both optimal least-cost boiler setpoints to the boiler operators in the control room, as well as optimal coal blending recommendations designed to reduce fuel costs and fuel-related derates. The goal of the project was to demonstrate that use of PECOS would enable coal-fired power plants to make more economic use of U.S. coals while reducing emissions.

  19. A supply chain optimization framework for CO2 emission reduction: Case of the Netherlands

    OpenAIRE

    Kalyanarengan Ravi, Narayen; Zondervan, Edwin; Van Sint Annaland, Martin; Fransoo, Jan C.; Grievink, J.

    2016-01-01

    A major challenge for the industrial deployment of a CO2 emission reduction methodology is to reduce the overall cost and the integration of all the nodes in the supply chain for CO2 emission reduction. In this work, we develop a mixed integer linear optimization model that selects appropriate sources, capture process, transportation network and CO2 storage sites and optimize for a minimum overall cost. Initially, we screen the sources and storage options available in the Netherlands at diffe...

  20. Ozone reduction strategy for the northeastern part of Austria: cooperation and compilation of the fundamentals

    International Nuclear Information System (INIS)

    Orthofer, R.; Winiwarter, W.

    1996-05-01

    This report is contribution to the implementation of an ozone reduction strategy for the northeastern part of Austria. The report contains a regional emission inventory, an emission projection for the years 1996, 2001 and 2006, an evaluation of further stationary sources reduction options. The ozone formation potentials of non-methane volatile organic compounds (NMVOC) emissions were calculated separately for both mobile and stationary source group, in order to assess the respective contribution to the local ozone formation. It can be shown that status-quo reduction measures are more efficient in terms of ozone formation potential during the summer season than in terms of NMVOC emission mass reduction. It is recommended that further NMVOC emission control should focus primarily on industrial solvent emissions, domestic heating of water during summertime with solid fuels, and on stubble burning in the fields. (author)

  1. A sensitivity analysis of timing and costs of greenhouse gas emission reductions

    NARCIS (Netherlands)

    Gerlagh, R.; van der Zwaan, B.C.C.

    2004-01-01

    This paper analyses the optimal timing and macro-economic costs of carbon emission reductions that mitigate the global average atmospheric temperature increase. We use a macro-economic model in which there are two competing energy sources, fossil-fuelled and non-fossil-fuelled. Technological change

  2. Atmospheric stabilization of CO2 emissions: Near-term reductions and absolute versus intensity-based targets

    International Nuclear Information System (INIS)

    Timilsina, Govinda R.

    2008-01-01

    This study analyzes CO 2 emissions reduction targets for various countries and geopolitical regions by the year 2030 to stabilize atmospheric concentrations of CO 2 at 450 ppm (550 ppm including non-CO 2 greenhouse gases) level. It also determines CO 2 intensity cuts that would be required in those countries and regions if the emission reductions were to be achieved through intensity-based targets without curtailing their expected economic growth. Considering that the stabilization of CO 2 concentrations at 450 ppm requires the global trend of CO 2 emissions to be reversed before 2030, this study develops two scenarios: reversing the global CO 2 trend in (i) 2020 and (ii) 2025. The study shows that global CO 2 emissions would be limited at 42 percent above 1990 level in 2030 if the increasing trend of global CO 2 emissions were to be reversed by 2020. If reversing the trend is delayed by 5 years, global CO 2 emissions in 2030 would be 52 percent higher than the 1990 level. The study also finds that to achieve these targets while maintaining expected economic growth, the global average CO 2 intensity would require a 68 percent drop from the 1990 level or a 60 percent drop from the 2004 level by 2030

  3. The cost-effectiveness of household photovoltaic systems in reducing greenhouse gas emissions in Australia: Linking subsidies with emission reductions

    International Nuclear Information System (INIS)

    Burtt, D.; Dargusch, P.

    2015-01-01

    Highlights: • Payback period for Australian household PV fell to four years in 2011 and 2012. • PV became attractive due to high feed-in tariffs and declining PV costs. • Cost was AU$200/t CO 2 e in 2010, expected to be AU$65 to AU$100/t CO 2 e by 2020. • PV resulted in greenhouse gas emissions reducing by 3.7 million t CO 2 e in 2013. • PV expected to reduce greenhouse gas emissions by 8 million t CO 2 e in 2020. - Abstract: This paper examines the cost-effectiveness of subsidies (feed-in tariffs and renewable energy credits) paid for by electricity consumers to support the uptake of roof top photovoltaic (PV) systems by households in Australia. We estimate annual payback periods, and then regress these against the actual uptake of household PV and associated emission reductions, creating a relationship not apparent in other research. Sensitivity analysis reveals that the declining cost of PV panels had most impact on PV uptake followed by feed-in tariffs, renewable energy credits and the increasing cost of household electricity tariffs. Our modelling shows that feed-in tariffs were higher than necessary to achieve the resultant levels of PV uptake and that the low cost of PV panels and comparatively high electricity tariffs are likely to result in a continuing strong uptake of household PV in Australia. Our modelling shows that subsidies peaked in 2011 and 2012, with payback periods of three to four years, having since increased to five to six years. Emission reduction costs are expected to reduce from over AU$200 per t CO 2 e in 2013 to between AU$65 and AU$100 per t CO 2 e in 2020. Household PV reduced Australia’s emissions by 3.7 million t CO 2 e in 2013 (1.7% of Australia’s total emissions) and is expected to reach eight million tonnes (3.7% of Australia’s total emissions) by 2020

  4. The role of anthropogenic aerosol emission reduction in achieving the Paris Agreement's objective

    Science.gov (United States)

    Hienola, Anca; Pietikäinen, Joni-Pekka; O'Donnell, Declan; Partanen, Antti-Ilari; Korhonen, Hannele; Laaksonen, Ari

    2017-04-01

    The Paris agreement reached in December 2015 under the auspices of the United Nation Framework Convention on Climate Change (UNFCCC) aims at holding the global temperature increase to well below 2◦C above preindustrial levels and "to pursue efforts to limit the temperature increase to 1.5◦C above preindustrial levels". Limiting warming to any level implies that the total amount of carbon dioxide (CO2) - the dominant driver of long-term temperatures - that can ever be emitted into the atmosphere is finite. Essentially, this means that global CO2 emissions need to become net zero. CO2 is not the only pollutant causing warming, although it is the most persistent. Short-lived, non-CO2 climate forcers also must also be considered. Whereas much effort has been put into defining a threshold for temperature increase and zero net carbon emissions, surprisingly little attention has been paid to the non-CO2 climate forcers, including not just the non-CO2 greenhouse gases (methane (CH4), nitrous oxide (N2O), halocarbons etc.) but also the anthropogenic aerosols like black carbon (BC), organic carbon (OC) and sulfate. This study investigates the possibility of limiting the temperature increase to 1.5◦C by the end of the century under different future scenarios of anthropogenic aerosol emissions simulated with the very simplistic MAGICC climate carbon cycle model as well as with ECHAM6.1-HAM2.2-SALSA + UVic ESCM. The simulations include two different CO2 scenarios- RCP3PD as control and a CO2 reduction leading to 1.5◦C (which translates into reaching the net zero CO2 emissions by mid 2040s followed by negative emissions by the end of the century); each CO2 scenario includes also two aerosol pollution control cases denoted with CLE (current legislation) and MFR (maximum feasible reduction). The main result of the above scenarios is that the stronger the anthropogenic aerosol emission reduction is, the more significant the temperature increase by 2100 relative to pre

  5. Long-term energy savings and greenhouse gas emission reductions in the Swiss residential sector

    International Nuclear Information System (INIS)

    Siller, Thomas; Kost, Michael; Imboden, Dieter

    2007-01-01

    The aim of this paper is to explore the possibilities to reach two long-term targets regarding energy consumption and greenhouse gas emissions of the Swiss residential building stock: a reduction of the final energy consumption by a factor of 3 and of CO 2 emissions by a factor of 5 until 2050. A model is constructed to describe the dynamics of the energy-relevant properties of the residential building stock. Appropriate scenarios are discussed in terms of decisions made during construction or renovation of residential buildings which affect heat demand and determine the energy carriers used for heating and hot water generation. We show that both targets could be reached, although ambitious efforts are necessary. The central element of a successful strategy is to reduce the specific heat demand of existing buildings during renovation and to substitute the heating and hot water systems by less carbon intensive ones. Our results suggest that there is more flexibility to reach the emission target than the energy reduction target

  6. How to Achieve CO2 Emission Reduction Goals: What 'Jazz' and 'Symphony' Can Offer

    International Nuclear Information System (INIS)

    Rose, K.

    2013-01-01

    Achieving CO 2 emission reduction goals remains one of today's most challenging tasks. Global energy demand will grow for many decades to come. In many regions of the world cheap fossil fuels seem to be the way forward to meet ever growing energy demand. However, there are negative consequences to this, most notably increasing emission levels. Politicians and industry therefore must accept that make hard choices in this generation need to be made to bring about real changes for future generations and the planet to limit CO 2 emissions and climate change. In his presentation, prof. Rose will provide an insight into how CO 2 emission reduction goals can be set and achieved and how a balance between future energy needs and supply can be realised in the long run up to 2050 both globally and regionally. This will be done based on WEC's own leading analysis in this area, namely it recently launched World Energy Scenarios: composing energy futures to 2050 report and WEC's scenarios, Jazz and Symphony. WEC's full analysis, the complete report and supporting material is available online at: http://www.worldenergy.org/publications/2013/world-energy-scenarios-composing-energy-futures-to-2050.(author)

  7. Estimate of the technological costs of CO{sub 2} emission reductions in passenger cars. Emission reduction potentials and their costs; Technikkostenschaetzung fuer die CO{sub 2}-Emissionsminderung bei Pkw. Emissionsminderungspotenziale und ihre Kosten

    Energy Technology Data Exchange (ETDEWEB)

    Herbener, Reinhard; Jahn, Helge; Wetzel, Frank [Umweltbundesamt, Dessau-Rosslau (Germany). Fachgebiet I 3.2 - Schadstoffminderung und Energieeinsparung im Verkehr

    2008-08-06

    The Federal Environmental Office intended to identify the current fuel consumption reduction potential and the cost of efficiency-enhancing measures on passenger cars. For this purpose, an extensive bibliographic search was carried out, and experts from research institutes and from the automobile supplier industry were asked for their opinion. The results are published in table form. (orig.)

  8. The Production, Value, and Reduction Responsibility of Carbon Emissions through Electricity Consumption of Manufacturing Industries in South Korea and Thailand

    Science.gov (United States)

    Kitikun, Medhawin

    This dissertation provides a new method of measuring efforts by manufacturing industries to reduce their emissions by curtailing electricity consumption. Employing comprehensive firm-level data from the National Manufacture Annual Surveys of South Korea and Thailand, I construct the measure from estimates of revenue functions by industry. The data consists of firms from more than 20 industries in each year from 1982 to 2005 for Korea and from 2001 to 2008 for Thailand. With a total of more than two million observations, I estimate revenue functions for each industry and year. Here, I use three inputs: number of employees(L), fixed asset stock(K), and electricity consumption(E) and two types of functional forms to represent each industry's revenue function. Second, under market competitive condition, I find that profit maximizing firms deviated their level of electricity usage in production from the profit-maximizing level during the time period for both countries, and I develop a theoretical framework to explain this behavior. Then, I tested the theory using my empirical models. Results support the notion of a hidden environmental value expressed by firms in the form of voluntary deviations from profit-maximizing levels of input demand. The measure used is the gap between the marginal revenue product of electricity and its price. This gap should increase with income, consistent with the Environmental Kuznets Curve literature. My current model provides considerable support for this proposition. Estimates indicate, in most industries, a negative relationship between per-capita income and emissions. In the final section of the dissertation, I consider the equitable distribution of emissions reduction burden under an international agreement such as the reduction effort, Kyoto Protocol. Both developed and developing countries have to cut their emissions to a specific reduction percentage target. Domestically, I present two extreme scenarios. In the first scenario

  9. Carbon Emission Mitigation Potentials of Different Policy Scenarios and Their Effects on International Aviation in the Korean Context

    Directory of Open Access Journals (Sweden)

    Sungwook Yoon

    2016-11-01

    Full Text Available The objective of this study is to seek better policy options for greenhouse gas (GHG emission reduction in Korea’s international aviation industry by analyzing economic efficiency and environmental effectiveness with a system dynamics (SD model. Accordingly, we measured airlines sales and CO2 emission reductions to evaluate economic efficiency and environmental effectiveness, respectively, for various policies. The results show that the average carbon emission reduction rates of four policies compared to the business-as-usual (BAU scenario between 2015 and 2030 are 4.00% (Voluntary Agreement, 7.25% (Emission Trading System or ETS-30,000, 8.33% (Carbon Tax or CT-37,500, and 8.48% (Emission Charge System or EC-30,000. The average rate of decrease in airline sales compared to BAU for the ETS policy is 0.1% at 2030. Our results show that the ETS approach is the most efficient of all the analyzed CO2 reduction policies in economic terms, while the EC approach is the best policy to reduce GHG emissions. This study provides a foundation for devising effective response measures pertaining to GHG reduction and supports decision making on carbon tax and carbon credit pricing.

  10. Global estimations of the inventory and mitigation potential of methane emissions from rice cultivation conducted using the 2006 Intergovernmental Panel on Climate Change Guidelines

    Science.gov (United States)

    Yan, Xiaoyuan; Akiyama, Hiroko; Yagi, Kazuyuki; Akimoto, Hajime

    2009-06-01

    The Intergovernmental Panel on Climate Change (IPCC) regularly publishes guidelines for national greenhouse gas inventories and methane emission (CH4) from rice paddies has been an important component of these guidelines. While there have been many estimates of global CH4 emissions from rice fields, none of them have been obtained using the IPCC guidelines. Therefore, we used the Tier 1 method described in the 2006 IPCC guidelines to estimate the global CH4 emissions from rice fields. To accomplish this, we used country-specific statistical data regarding rice harvest areas and expert estimates of relevant agricultural activities. The estimated global emission for 2000 was 25.6 Tg a-1, which is at the lower end of earlier estimates and close to the total emission summarized by individual national communications. Monte Carlo simulation revealed a 95% uncertainty range of 14.8-41.7 Tg a-1; however, the estimation uncertainty was found to depend on the reliability of the information available regarding the amount of organic amendments and the area of rice fields that were under continuous flooding. We estimated that if all of the continuously flooded rice fields were drained at least once during the growing season, the CH4 emissions would be reduced by 4.1 Tg a-1. Furthermore, we estimated that applying rice straw off season wherever and whenever possible would result in a further reduction in emissions of 4.1 Tg a-1 globally. Finally, if both of these mitigation options were adopted, the global CH4 emission from rice paddies could be reduced by 7.6 Tg a-1. Although draining continuously flooded rice fields may lead to an increase in nitrous oxide (N2O) emission, the global warming potential resulting from this increase is negligible when compared to the reduction in global warming potential that would result from the CH4 reduction associated with draining the fields.

  11. Reduction of NOx emissions when burning low heating value gas

    International Nuclear Information System (INIS)

    Gustafsson, R.; Oskarsson, J.; Waldheim, L.

    1993-09-01

    On the gasification of nitrogen-rich fuel the nitrogen from the fuel goes into the gas phase in the form of ammonia and hydrogen cyanide and also nitrogen containing tars. When the gas is combusted the nitrogen compounds are oxidized to a great extent to NO x and, therefore, high NO x emissions can be found on the combustion of low heating value gas produced from energy forest wood chips as is also the case with direct combustion of nitrogen rich fuels. An experimental study has been carried out where the important parameters for designing a combustion chamber for low heating value gases have been studied in order to obtain maximum reduction of NO x emissions. The effect of tar cracking using dolomite on these emissions and the effect of parameters such as the addition of steam has also been tested. The tests were carried out with energy forest wood chips with 0.3% nitrogen. The gasification was carried out in a pyrolysis reactor, operated to yield a low heating value gas, and which was coupled to a simplified gas turbine combustion chamber at atmospheric pressure. The results show that the main part of the nitrogen in the fuel is found as ammonia in the low heating value gas. With this type of gasification the conversion of fuel nitrogen to ammonia in the gas is equivalent to 500-600 mg/MJ, calculated as NO 2 . Only very low amounts of hydrogen cyanide have been noted and no nitrogen containing tar components have been found. No apparent effect of steam additions has been noted. On the other hand the distribution of air in the combustion chamber and residence time during the under stoichiometric conditions are of great importance for the NO x reduction. Depending on the air distribution the emissions of NO 2 varied between 100 and 250 mg/MJ, calculated as NO 2 . 23 refs, 11 figs, 2 tabs

  12. Consumer-supplier-government triangular relations: Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

    International Nuclear Information System (INIS)

    Parag, Yael; Darby, Sarah

    2009-01-01

    The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens.

  13. Potential vehicle fleet CO2 reductions and cost implications for various vehicle technology deployment scenarios in Europe

    International Nuclear Information System (INIS)

    Pasaoglu, Guzay; Honselaar, Michel; Thiel, Christian

    2012-01-01

    The continuous rise in demand for road transportation has a significant effect on Europe's oil dependency and emissions of greenhouse gases. Alternative fuels and vehicle technology can mitigate these effects. This study analyses power-train deployment scenarios for passenger cars and light commercial vehicles in EU-27 until 2050. It considers European policy developments on vehicle CO 2 emissions, bio-energy mandates and reductions in the CO 2 footprint of the European energy mix and translates these into comprehensive scenarios for the road transport sector. It quantifies and assesses the potential impact of these scenarios on well-to-wheel (WtW) CO 2 emission reductions primary energy demand evolution, and cost aspects for the prospective vehicle owners. The study reveals that, under the deployed scenarios, the use of bio-fuel blends, technological learning and the deployment of hybrids, battery electric, plug-in hybrid and fuel cell vehicles can decrease WtW CO 2 emissions in EU-27 passenger road transport by 35–57% (compared to 2010 levels) and primary energy demand by 29–51 Mtoe as they would benefit from a future assumed decarbonised electricity and hydrogen mix in Europe. Learning effects can lead to acceptable payback periods for vehicle owners of electric drive vehicles. - Highlights: ► Power-train penetration scenarios for 2010–2050 passenger road transport in Europe. ► A dedicated tool is developed to analyse H 2 production and distribution mix till 2050. ► Alternative vehicles can drastically reduce CO 2 emissions and energy demand. ► Electric vehicles could become cost competitive to conventional vehicles by 2030. ► Policies needed to create adequate momentum and guarantee decarbonised transport.

  14. Diesel Engine Emission Reduction Using Catalytic Nanoparticles: An Experimental Investigation

    Directory of Open Access Journals (Sweden)

    Ajin C. Sajeevan

    2013-01-01

    Full Text Available Cerium oxide being a rare earth metal with dual valance state existence has exceptional catalytic activity due to its oxygen buffering capability, especially in the nanosized form. Hence when used as an additive in the diesel fuel it leads to simultaneous reduction and oxidation of nitrogen dioxide and hydrocarbon emissions, respectively, from diesel engine. The present work investigates the effect of cerium oxide nanoparticles on performance and emissions of diesel engine. Cerium oxide nanoparticles were synthesized by chemical method and techniques such as TEM, EDS, and XRD have been used for the characterization. Cerium oxide was mixed in diesel by means of standard ultrasonic shaker to obtain stable suspension, in a two-step process. The influence of nanoparticles on various physicochemical properties of diesel fuel has also been investigated through extensive experimentation by means of ASTM standard testing methods. Load test was done in the diesel engine to investigate the effect of nanoparticles on the efficiency and the emissions from the engine. Comparisons of fuel properties with and without additives are also presented.

  15. Atmospheric impacts of black carbon emission reductions through the strategic use of biodiesel in California

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hongliang [Department of Civil and Environmental Engineering, University of California at Davis, 1 Shields Ave, Davis, CA 95616 (United States); Magara-Gomez, Kento T. [Environmental Chemistry and Technology Program, University of Wisconsin–Madison, 660 North Park Street, Madison, WI 53706 (United States); Environmental Engineering Department, Pontificia Bolivariana University-Bucaramanga, Km 7 Vía Piedecuesta, Bucaramanga (Colombia); Olson, Michael R. [Environmental Chemistry and Technology Program, University of Wisconsin–Madison, 660 North Park Street, Madison, WI 53706 (United States); Okuda, Tomoaki [Environmental Chemistry and Technology Program, University of Wisconsin–Madison, 660 North Park Street, Madison, WI 53706 (United States); Department of Applied Chemistry, Faculty of Science and Technology, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-8522 (Japan); Walz, Kenneth A. [Environmental Chemistry and Technology Program, University of Wisconsin–Madison, 660 North Park Street, Madison, WI 53706 (United States); Madison Area Technical College, 3550 Anderson Street, Madison, WI 53704 (United States); Schauer, James J. [Environmental Chemistry and Technology Program, University of Wisconsin–Madison, 660 North Park Street, Madison, WI 53706 (United States); Kleeman, Michael J., E-mail: mjkleeman@ucdavis.edu [Department of Civil and Environmental Engineering, University of California at Davis, 1 Shields Ave, Davis, CA 95616 (United States)

    2015-12-15

    The use of biodiesel as a replacement for petroleum-based diesel fuel has gained interest as a strategy for greenhouse gas emission reductions, energy security, and economic advantage. Biodiesel adoption may also reduce particulate elemental carbon (EC) emissions from conventional diesel engines that are not equipped with after-treatment devices. This study examines the impact of biodiesel blends on EC emissions from a commercial off-road diesel engine and simulates the potential public health benefits and climate benefits. EC emissions from the commercial off-road engine decreased by 76% when ultra-low sulfur commercial diesel (ULSD) fuel was replaced by biodiesel. Model calculations predict that reduced EC emissions translate directly into reduced EC concentrations in the atmosphere, but the concentration of secondary particulate matter was not directly affected by this fuel change. Redistribution of secondary particulate matter components to particles emitted from other sources did change the size distribution and therefore deposition rates of those components. Modification of meteorological variables such as water content and temperature influenced secondary particulate matter formation. Simulations with a source-oriented WRF/Chem model (SOWC) for a severe air pollution episode in California that adopted 75% biodiesel blended with ULSD in all non-road diesel engines reduced surface EC concentrations by up to 50% but changed nitrate and total PM2.5 mass concentrations by less than ± 5%. These changes in concentrations will have public health benefits but did not significantly affect radiative forcing at the top of the atmosphere. The removal of EC due to the adoption of biodiesel produced larger coatings of secondary particulate matter on other atmospheric particles containing residual EC leading to enhanced absorption associated with those particles. The net effect was a minor change in atmospheric optical properties despite a large change in atmospheric EC

  16. Atmospheric impacts of black carbon emission reductions through the strategic use of biodiesel in California

    International Nuclear Information System (INIS)

    Zhang, Hongliang; Magara-Gomez, Kento T.; Olson, Michael R.; Okuda, Tomoaki; Walz, Kenneth A.; Schauer, James J.; Kleeman, Michael J.

    2015-01-01

    The use of biodiesel as a replacement for petroleum-based diesel fuel has gained interest as a strategy for greenhouse gas emission reductions, energy security, and economic advantage. Biodiesel adoption may also reduce particulate elemental carbon (EC) emissions from conventional diesel engines that are not equipped with after-treatment devices. This study examines the impact of biodiesel blends on EC emissions from a commercial off-road diesel engine and simulates the potential public health benefits and climate benefits. EC emissions from the commercial off-road engine decreased by 76% when ultra-low sulfur commercial diesel (ULSD) fuel was replaced by biodiesel. Model calculations predict that reduced EC emissions translate directly into reduced EC concentrations in the atmosphere, but the concentration of secondary particulate matter was not directly affected by this fuel change. Redistribution of secondary particulate matter components to particles emitted from other sources did change the size distribution and therefore deposition rates of those components. Modification of meteorological variables such as water content and temperature influenced secondary particulate matter formation. Simulations with a source-oriented WRF/Chem model (SOWC) for a severe air pollution episode in California that adopted 75% biodiesel blended with ULSD in all non-road diesel engines reduced surface EC concentrations by up to 50% but changed nitrate and total PM2.5 mass concentrations by less than ± 5%. These changes in concentrations will have public health benefits but did not significantly affect radiative forcing at the top of the atmosphere. The removal of EC due to the adoption of biodiesel produced larger coatings of secondary particulate matter on other atmospheric particles containing residual EC leading to enhanced absorption associated with those particles. The net effect was a minor change in atmospheric optical properties despite a large change in atmospheric EC

  17. Measuring the potential of GHG emissions reductions on the food and beverage processing sector in Ontario

    International Nuclear Information System (INIS)

    Singleton, M.; Ciccone, A.D.

    2000-07-01

    Seven per cent of the greenhouse gas emissions from the industrial sector in Ontario relate to the food and beverage processing sector. This report provides the Ontario Ministry of Agriculture, Food and Rural Affairs with the ability to identify the effects of reducing greenhouse gas emissions on Ontario's food and beverage processing sector. The study was undertaken in response to Ontario's efforts to address the challenges set by the Kyoto Protocol and the proposed release of Canada's National Implementation Strategy on Climate Change. The objective of the report is to help Ontario decide if it should support a national strategy and/or ratify the Kyoto Protocol. Potential ways to meet the Kyoto commitments were also identified in the report. The study was based on an analysis of large amounts of data and information regarding the economic and technological aspects that affect the food and beverage processing industry in Ontario, including the seven major sub-sectors, located mostly in southern Ontario. The types of plants and their associated processes and fuel use were assessed to determine the size and nature of fuel use and greenhouse gas emissions for each sub-sector. The study examined end uses and base technologies for each sub-sector and compared them with energy efficient technologies and opportunities within the industry. Barriers, and how to overcome them, were also described. Ontario's results were then compared with results from Canada's Foundation Paper and Options Analysis prepared for the Agriculture and Agri-Food Table on Climate Change. It was determined that the primary source of greenhouse gases for the industry comes from the use of energy directly from the combustion of fossil fuels and indirectly from the use of electricity. The contributions to greenhouse gases through chlorofluorocarbons or through waste stream is small and shrinking. It was concluded that mitigation strategies should concentrate on energy conservation through energy

  18. Climate change and WTO : boundary mediation on certified emission reductions

    International Nuclear Information System (INIS)

    Kim, Ho Cheol

    2011-07-01

    This book mentions climate change and WTO with is climate change true? International effort for reduce of greenhouse gas with UNFCCC, Kyoto protocol, Copenhagen Accord and Cancun Agreement, WTO norm, discussion on introduction of boundary mediation on certified emission reductions, analysis on regulation related WTO norm, violation of regulation on border measure of prohibition, violation of principle on GATT, justification, except through Article 20 of GATT, assessment of policy and supplementation on the law.

  19. Reduction of SO sub 2 emission from a fluidized-bed under staged combustion by coarse limestone

    International Nuclear Information System (INIS)

    Khan, W.Z.; Gibbbs, B.M.

    1998-01-01

    A study was performed to investigate the effect of course limestone on the reduction of SO sub 2 emission from a fluidized-bed under staged combustion. The limestone of 1.2-2.5 mm size was premixed with fine coal of 1-3 mm size and fed under bed. The staging levels, bed height, and Ca/S ratio was fixed at 70:30, 30 cm and 3:1, respectively. A maximum of around 50% reduction in SO sub 2 emissions was achieved at both excess air of 20 and 40% and at 830 deg. C. bed temperature. The SO sub 2 emissions were very sensitive to bed temperature. The course limestone was found better in desulfurization efficiency at lower temperature than fine limestone. (author)

  20. Marginal abatement cost and carbon reduction potential outlook of key energy efficiency technologies in China's building sector to 2030

    International Nuclear Information System (INIS)

    Xiao, He; Wei, Qingpeng; Wang, Hailin

    2014-01-01

    China achieved an energy savings of 67.5 Mtce in the building sector at the end of the 11th Five-Year Plan and set a new target of 116 Mtce by the end of the 12th Five-Year Plan. In this paper, an improved bottom-up model is developed to assess the carbon abatement potential and marginal abatement cost (MAC) of 34 selected energy-saving technologies/measures for China's building sector. The total reduction potential is 499.8 million t-CO 2 by 2030. 4.8 Gt-CO 2 potential will be achieved cumulatively to 2030. By 2030, total primary energy consumption of Chinese building sector will rise continuously to 1343 Mtce in the reference scenario and 1114 Mtce in the carbon reduction scenario. Total carbon dioxide emission will rise to 2.39 Gt-CO 2 and 1.9 Gt-CO 2 in two scenarios separately. The average carbon abatement cost of the aforementioned technologies is 19.5 $/t-CO 2 . The analysis reveals that strengthening successfully energy-saving technologies is important, especially for the residential building sector. The central government's direct investments in such technologies should be reduced without imposing significant negative effects. - Highlights: • MAC of 34 energy-saving technologies of China's building sector is calculated. • Energy use and CO 2 emission of China's building sector by 2030 is forecasted. • The reference and the carbon reduction scenarios are compared

  1. Optimization of Power Generation Rights Under the Requirements of Energy Conservation and Emission Reduction

    Science.gov (United States)

    Hu-ping, YANY; Chong-wei, ZHONG; Fei-fei, YAN; Cheng-yi, TANG

    2018-03-01

    In recent years, the energy crisis and greenhouse effect problem have caused wide public concern, if these issues cannot be resolved quickly, they will bring troubles to people’s lives.In response, many countries around the world have implemented policies to reduce energy consumption and greenhouse gas emissions. In our country, the electric power industry has made great contribution to the daily life of people and the development of industry, but it is also an industry of high consumption and high emission.In order to realize the sustainable development of society, it is necessary to make energy conservation and emission reduction in the power industry as an important part of the realization of this goal.In this context, power generation trade has become a hot topic in energy conservation and emission reduction.Through the electricity consumption of the units with different power efficiency and coal consumption rate,it can achieve the target of reducing coal consumption, reducing network loss, reducing greenhouse gas emission, and increasing social benefit,and so on. This article put forward a optimal energy model on the basis of guaranteeing safety and environmental protection.In this paper, they used the IEEE30, IEEE39, IEEE57 and IEEE118 node system as an example, and set up the control groups to prove the practicality of the presented model.The solving method of this model was interior-point method.

  2. Carbon Emission Reduction with Capital Constraint under Greening Financing and Cost Sharing Contract.

    Science.gov (United States)

    Qin, Juanjuan; Zhao, Yuhui; Xia, Liangjie

    2018-04-13

    Motivated by the industrial practices, this work explores the carbon emission reductions for the manufacturer, while taking into account the capital constraint and the cap-and-trade regulation. To alleviate the capital constraint, two contracts are analyzed: greening financing and cost sharing. We use the Stackelberg game to model four cases as follows: (1) in Case A1, the manufacturer has no greening financing and no cost sharing; (2) in Case A2, the manufacturer has greening financing, but no cost sharing; (3) in Case B1, the manufacturer has no greening financing but has cost sharing; and, (4) in Case B2, the manufacturer has greening financing and cost sharing. Then, using the backward induction method, we derive and compare the equilibrium decisions and profits of the participants in the four cases. We find that the interest rate of green finance does not always negatively affect the carbon emission reduction of the manufacturer. Meanwhile, the cost sharing from the retailer does not always positively affect the carbon emission reduction of the manufacturer. When the cost sharing is low, both of the participants' profits in Case B1 (under no greening finance) are not less than that in Case B2 (under greening finance). When the cost sharing is high, both of the participants' profits in Case B1 (under no greening finance) are less than that in Case B2 (under greening finance).

  3. Carbon Emission Reduction with Capital Constraint under Greening Financing and Cost Sharing Contract

    Science.gov (United States)

    Qin, Juanjuan; Zhao, Yuhui; Xia, Liangjie

    2018-01-01

    Motivated by the industrial practices, this work explores the carbon emission reductions for the manufacturer, while taking into account the capital constraint and the cap-and-trade regulation. To alleviate the capital constraint, two contracts are analyzed: greening financing and cost sharing. We use the Stackelberg game to model four cases as follows: (1) in Case A1, the manufacturer has no greening financing and no cost sharing; (2) in Case A2, the manufacturer has greening financing, but no cost sharing; (3) in Case B1, the manufacturer has no greening financing but has cost sharing; and, (4) in Case B2, the manufacturer has greening financing and cost sharing. Then, using the backward induction method, we derive and compare the equilibrium decisions and profits of the participants in the four cases. We find that the interest rate of green finance does not always negatively affect the carbon emission reduction of the manufacturer. Meanwhile, the cost sharing from the retailer does not always positively affect the carbon emission reduction of the manufacturer. When the cost sharing is low, both of the participants’ profits in Case B1 (under no greening finance) are not less than that in Case B2 (under greening finance). When the cost sharing is high, both of the participants’ profits in Case B1 (under no greening finance) are less than that in Case B2 (under greening finance). PMID:29652859

  4. Wind Energy and Air Emission Reduction Benefits: A Primer

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, D.; High, C.

    2008-02-01

    This document provides a summary of the impact of wind energy development on various air pollutants for a general audience. The core document addresses the key facts relating to the analysis of emission reductions from wind energy development. It is intended for use by a wide variety of parties with an interest in this issue, ranging from state environmental officials to renewable energy stakeholders. The appendices provide basic background information for the general reader, as well as detailed information for those seeking a more in-depth discussion of various topics.

  5. Is the Clean Development Mechanism Effective for Emission Reductions?

    DEFF Research Database (Denmark)

    Tarp, Finn; Huang, Yongfu; He, Jingjing

    2014-01-01

    with great challenges, given the wide divide between developed and developing nations. Against this background, comprehensive evaluations of the effectiveness of Kyoto market‐based mechanisms such as the Clean Development Mechanism (CDM) in terms of mitigating human‐induced climate change are urgently needed...... reductions for 60 CDM host countries over the period 2005–2010, using a newly developed econometric method for dynamic panel data models associated with the X‐differencing procedure. Our results provide evidence in support of a decline in CO 2 emissions in CDM host countries. We conclude...

  6. Landscape planning for agricultural nonpoint source pollution reduction III: Assessing phosphorus and sediment reduction potential

    Science.gov (United States)

    Diebel, M.W.; Maxted, J.T.; Robertson, Dale M.; Han, S.; Vander Zanden, M. J.

    2009-01-01

    Riparian buffers have the potential to improve stream water quality in agricultural landscapes. This potential may vary in response to landscape characteristics such as soils, topography, land use, and human activities, including legacies of historical land management. We built a predictive model to estimate the sediment and phosphorus load reduction that should be achievable following the implementation of riparian buffers; then we estimated load reduction potential for a set of 1598 watersheds (average 54 km2) in Wisconsin. Our results indicate that land cover is generally the most important driver of constituent loads in Wisconsin streams, but its influence varies among pollutants and according to the scale at which it is measured. Physiographic (drainage density) variation also influenced sediment and phosphorus loads. The effect of historical land use on present-day channel erosion and variation in soil texture are the most important sources of phosphorus and sediment that riparian buffers cannot attenuate. However, in most watersheds, a large proportion (approximately 70%) of these pollutants can be eliminated from streams with buffers. Cumulative frequency distributions of load reduction potential indicate that targeting pollution reduction in the highest 10% of Wisconsin watersheds would reduce total phosphorus and sediment loads in the entire state by approximately 20%. These results support our approach of geographically targeting nonpoint source pollution reduction at multiple scales, including the watershed scale. ?? 2008 Springer Science+Business Media, LLC.

  7. CO_2 emissions reduction of Chinese light manufacturing industries: A novel RAM-based global Malmquist–Luenberger productivity index

    International Nuclear Information System (INIS)

    Emrouznejad, Ali; Yang, Guo-liang

    2016-01-01

    Climate change has become one of the most challenging issues facing the world. Chinese government has realized the importance of energy conservation and prevention of the climate changes for sustainable development of China's economy and set targets for CO_2 emissions reduction in China. In China industry contributes 84.2% of the total CO_2 emissions, especially manufacturing industries. Data envelopment analysis (DEA) and Malmquist productivity (MP) index are the widely used mathematical techniques to address the relative efficiency and productivity of a group of homogenous decision making units, e.g. industries or countries. However, in many real applications, especially those related to energy efficiency, there are often undesirable outputs, e.g. the pollutions, waste and CO_2 emissions, which are produced inevitably with desirable outputs in the production. This paper introduces a novel Malmquist–Luenberger productivity (MLP) index based on directional distance function (DDF) to address the issue of productivity evolution of DMUs in the presence of undesirable outputs. The new RAM (Range-adjusted measure)-based global MLP index has been applied to evaluate CO_2 emissions reduction in Chinese light manufacturing industries. Recommendations for policy makers have been discussed. - Highlights: •CO_2 emissions reduction in Chinese light manufacturing industries are measured. •A novel RAM based Malmquist–Luenberger productivity index has been developed. •Recommendation to policy makers for reducing CO_2 reduction in China are given.

  8. Carbon dioxide emissions reduction in China's transport sector: A dynamic VAR (vector autoregression) approach

    International Nuclear Information System (INIS)

    Xu, Bin; Lin, Boqiang

    2015-01-01

    Energy saving and carbon dioxide emission reduction in China is attracting increasing attention worldwide. At present, China is in the phase of rapid urbanization and industrialization, which is characterized by rapid growth of energy consumption. China's transport sector is highly energy-consuming and pollution-intensive. Between 1980 and 2012, the carbon dioxide emissions in China's transport sector increased approximately 9.7 times, with an average annual growth rate of 7.4%. Identifying the driving forces of the increase in carbon dioxide emissions in the transport sector is vital to developing effective environmental policies. This study uses Vector Autoregressive model to analyze the influencing factors of the changes in carbon dioxide emissions in the sector. The results show that energy efficiency plays a dominant role in reducing carbon dioxide emissions. Private vehicles have more impact on emission reduction than cargo turnover due to the surge in private car population and its low energy efficiency. Urbanization also has significant effect on carbon dioxide emissions because of large-scale population movements and the transformation of the industrial structure. These findings are important for the relevant authorities in China in developing appropriate energy policy and planning for the transport sector. - Highlights: • The driving forces of CO 2 emissions in China's transport sector were investigated. • Energy efficiency plays a dominant role in reducing carbon dioxide emissions. • Urbanization has significant effect on CO 2 emissions due to large-scale migration. • The role of private cars in reducing emissions is more important than cargo turnover

  9. Arctic shipping emissions inventories and future scenarios

    Directory of Open Access Journals (Sweden)

    J. J. Corbett

    2010-10-01

    Full Text Available This paper presents 5 km×5 km Arctic emissions inventories of important greenhouse gases, black carbon and other pollutants under existing and future (2050 scenarios that account for growth of shipping in the region, potential diversion traffic through emerging routes, and possible emissions control measures. These high-resolution, geospatial emissions inventories for shipping can be used to evaluate Arctic climate sensitivity to black carbon (a short-lived climate forcing pollutant especially effective in accelerating the melting of ice and snow, aerosols, and gaseous emissions including carbon dioxide. We quantify ship emissions scenarios which are expected to increase as declining sea ice coverage due to climate change allows for increased shipping activity in the Arctic. A first-order calculation of global warming potential due to 2030 emissions in the high-growth scenario suggests that short-lived forcing of ~4.5 gigagrams of black carbon from Arctic shipping may increase global warming potential due to Arctic ships' CO2 emissions (~42 000 gigagrams by some 17% to 78%. The paper also presents maximum feasible reduction scenarios for black carbon in particular. These emissions reduction scenarios will enable scientists and policymakers to evaluate the efficacy and benefits of technological controls for black carbon, and other pollutants from ships.

  10. Development of a health effects based priority ranking system for air emissions reductions from oil refineries in Canada

    International Nuclear Information System (INIS)

    McColl, S.; Gower, S.; Hicks, J.; Shortreed, J.; Craig, L.

    2004-01-01

    This paper presents the concept and methodologies behind the development of a health effects priority ranking tool for the reduction of air emissions from oil refineries. The Health Effects Indicators Decision Index- Versions 2 (Heidi II) was designed to assist policy makers in prioritizing air emissions reductions on the basis of estimated risk to human health. Inputs include facility level rankings of potential health impacts associated with carcinogenic air toxics, non-carcinogenic air toxics and criteria air contaminants for each of the 20 refineries in Canada. Rankings of estimated health impacts are presented on predicted incidence of health effects. Heidi II considers site-specific annual pollutant emission data, ambient air concentrations associated with releases and concentration response functions for various types of health effects. Additional data includes location specific background air concentrations, site-specific population densities, and the baseline incidence of different health effects endpoints, such as cancer, non-cancer illnesses and cardiorespiratory illnesses and death. Air pollutants include the 29 air toxics reported annually in Environment Canada's National Pollutant Release Inventory. Three health impact ranking outputs are provided for each facility: ranking of pollutants based on predicted number of annual cases of health effects; ranking of pollutants based on simplified Disability Adjusted Life Years (DALYs); and ranking of pollutants based on more complex DALYs that consider types of cancer, systemic disease or types of cardiopulmonary health effects. Rankings rely on rough statistical estimates of predicted incidence rates for health endpoints. The models used to calculate rankings can provide useful guidance by comparing estimated health impacts. Heidi II has demonstrated that it is possible to develop a consistent and objective approach for ranking priority reductions of air emissions. Heidi II requires numerous types and

  11. Reduction in Greenhouse Gas Emissions Associated with Worm Control in Lambs

    Directory of Open Access Journals (Sweden)

    Drew G. Coulter

    2013-04-01

    Full Text Available There are currently little or no data on the role of endemic disease control in reducing greenhouse gas (GHG emissions from livestock. In the present study, we have used an Intergovernmental Panel on Climate Change (IPCC-compliant model to calculate GHG emissions from naturally grazing lambs under four different anthelmintic drug treatment regimes over a 5-year study period. Treatments were either “monthly” (NST, “strategic” (SPT, “targeted” (TST or based on “clinical signs” (MT. Commercial sheep farming practices were simulated, with lambs reaching a pre-selected target market weight (38 kg removed from the analysis as they would no longer contribute to the GHG budget of the flock. Results showed there was a significant treatment effect over all years, with lambs in the MT group consistently taking longer to reach market weight, and an extra 10% emission of CO2e per kg of weight gain over the other treatments. There were no significant differences between the other three treatment strategies (NST, SPT and TST in terms of production efficiency or cumulated GHG emissions over the experimental period. This study has shown that endemic disease control can contribute to a reduction in GHG emissions from animal agriculture and help reduce the carbon footprint of livestock farming.

  12. A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles

    International Nuclear Information System (INIS)

    Shancita, I.; Masjuki, H.H.; Kalam, M.A.; Rizwanul Fattah, I.M.; Rashed, M.M.; Rashedul, H.K.

    2014-01-01

    Highlights: • Introduce various idling reduction technologies for transport vehicles. • Exhibit their energy use, advantages, disadvantages to understand their capability. • Conduct critical review to improve fuel economy and exhaust emissions. • Suggest better technology according to their performance ability. - Abstract: To achieve reductions in vehicle idling, strategies and actions must be taken to minimize the time spent by drivers idling their engines. A number of benefits can be obtained in limiting the idling time. These benefits include savings in fuel use and maintenance costs, vehicle life extension, and reduction in exhaust emissions. The main objective of idling reduction (IR) devices is to reduce the amount of energy wasted by idling trucks, rail locomotives, and automobiles. During idling, gasoline vehicles emit a minimum amount of nitrogen oxides (NO x ) and negligible particulate matter (PM). However, generally a large amount of carbon monoxide (CO) and hydrocarbons (HC) are produced from these vehicles. Gasoline vehicles consume far more fuel at an hourly rate than their diesel counterparts during idling. Higher NOx and comparatively larger PM are produced by diesel vehicles than gasoline vehicles on the average during idling. Auxiliary power unit (APU), direct-fired heaters, fuel cells, thermal storage system, truck stop electrification, battery-based systems, engine idle management (shutdown) systems, electrical (shore power) solutions, cab comfort system, and hybridization are some of the available IR technologies whose performances for reducing fuel consumption and exhaust emissions have been compared. This paper analyzes the availability and capability of most efficient technologies to reduce fuel consumption and exhaust emissions from diesel and gasoline vehicles by comparing the findings of previous studies. The analysis reveals that among all the options direct fired heaters, APUs and electrified parking spaces exhibit better

  13. Reduction of greenhouse gas emissions in the rape cultivation with special consideration of nitrogen fertilization; Minderung von Treibhausgasemissionen im Rapsanbau unter besonderer Beruecksichtigung der Stickstoffduengung

    Energy Technology Data Exchange (ETDEWEB)

    Heilmann, Hubert [Landesforschungsanstalt fuer Landwirtschaft und Fischerei Mecklenburg-Vorpommern, Guelzow-Pruezen (Germany). Inst. fuer Pflanzenproduktion und Betriebswirtschaft; Riemer, Doerte

    2017-08-01

    Involved into the research project ''Mitigation of greenhouse gas emissions in oilseed rape cropping with special consideration of nitrogen fertilizing'' regional specific GHG cropping emissions according to benchmark and regional experts are calculated by using a calculation method developed in cooperation with IFEU and according to IPCC (2006). The following results are achieved for 35 German NUTS2-regions: - nitrogen fertilization is the main influence for GHG emission reduction; - the use of low-emission nitrogen fertilizers is worth for GHG emission reduction; - without increasing the nutrient efficiency of organic fertilizers, GHG emission reductions are difficult to achieve in many regions; - GHG emission reduction/climate protection and realization of the WRRL or N-Saldo reduction come up to the same aim; - economic consequences of restrictive carbon mitigation can be compensated by slight price surcharges for certified raw material.

  14. An overview of monitoring and reduction strategies for health and climate change related emissions in the Middle East and North Africa region

    Science.gov (United States)

    Abbass, Rana Alaa; Kumar, Prashant; El-Gendy, Ahmed

    2018-02-01

    This review assesses the current state of air pollution in the Middle East and North Africa (MENA) region. Emission types and sources in the region are identified and quantified to understand the monitoring, legislative and reduction needs through a systematic review of available literature. It is found that both health (e.g., particulate matter, PM; and heavy metals) and climate change (e.g., carbon dioxide and methane) emissions are increasing with the time. Regarding health emissions, over 99% of the MENA population is exposed to PM levels that exceed the standards set by the World Health Organization (WHO). The dominant source of climate change emissions is the energy sector contributing ∼38% of CO2 emissions, followed by the transport sector at ∼25%. Numerous studies have been carried out on air pollution in the region, however, there is a lack of comprehensive regional studies that would provide a holistic assessment. Most countries have air quality monitoring systems in place, however, the data is not effectively evaluated to devise pollution reduction strategies. Moreover, comprehensive emission inventories for the individual countries in the region are also lacking. The legislative and regulatory systems in MENA region follow the standards set by international environmental entities such as the WHO and the U.S. Environmental Protection Agency but their effective reinforcement remains a concern. It is concluded that the opportunities for emission reduction and control could be best implemented in the road transportation sector using innovative technologies. One of the potential ways forward is to channel finance flows from fossil fuel subsidies to upgrade road transport with public transportation systems such as buses and trains, as suggested by a 'high shift' scenario for MENA region. Furthermore, emission control programs and technologies are more effective when sponsored and implemented by the private sector; the success of Saudi Aramco in supporting

  15. Study on emission characteristics and reduction strategy of nitrous oxide during wastewater treatment by different processes.

    Science.gov (United States)

    Sun, Shichang; Bao, Zhiyuan; Sun, Dezhi

    2015-03-01

    Given the inexorable increase in global wastewater treatment, increasing amounts of nitrous oxide are expected to be emitted from wastewater treatment plants and released to the atmosphere. It has become imperative to study the emission and control of nitrous oxide in the various wastewater treatment processes currently in use. In the present investigation, the emission characteristics and the factors affecting the release of nitrous oxide were studied via full- and pilot-scale experiments in anoxic-oxic, sequencing batch reactor and oxidation ditch processes. We propose an optimal treatment process and relative strategy for nitrous oxide reduction. Our results show that both the bio-nitrifying and bio-denitrifying treatment units in wastewater treatment plants are the predominant sites for nitrous oxide production in each process, while the aerated treatment units are the critical sources for nitrous oxide emission. Compared with the emission of nitrous oxide from the anoxic-oxic (1.37% of N-influent) and sequencing batch reactor (2.69% of N-influent) processes, much less nitrous oxide (0.25% of N-influent) is emitted from the oxidation ditch process, which we determined as the optimal wastewater treatment process for nitrous oxide reduction, given the current technologies. Nitrous oxide emissions differed with various operating parameters. Controlling the dissolved oxygen concentration at a proper level during nitrification and denitrification and enhancing the utilization rate of organic carbon in the influent for denitrification are the two critical methods for nitrous oxide reduction in the various processes considered.

  16. The research and application of electricity economic boom model under the constraint of energy conservation and emission reduction

    Science.gov (United States)

    Chen, Guangyan; Xia, Huaijian; Chen, Meiling; Wang, Dong; Jia, Sujin

    2017-10-01

    Energy saving and emission reduction policies affects the development of high power industry, thereby affecting electricity demand, so the study of the electricity industry boom helps to master the national economy. This paper analyses the influence of energy saving and emission reduction on power generation structure and pollutant emission in power industry. Through the construction of electricity market composite boom index to indicate electricity boom, using boom index to study volatility characteristics and trend of electricity market. Here we provide a method for the enterprise and the government, that it can infer the overall operation of the national economy situation from power data.

  17. Technologies for the Reduction of Nitrogen Oxides Emissions

    Directory of Open Access Journals (Sweden)

    Paulica Arsenie

    2015-06-01

    Full Text Available When it comes to gas turbines, their main problem concerning pollutant emissions is represented by nitric oxides. Among other emissions, sulphur oxides being much reduced due to the use of liquid distilled and gas fuels with a low content of sulphur. Using water or steam injection became the favourite method during the '80s and especially the '90s since "dry" methods and catalytic reduction were both at the beginning of the development phase. Catalytic convertors have been used since the '80s and they are still used although the costs of renewing the catalyst are very high. In the last twenty years a gradual decrease has been registered on the limits of nitric oxides from 75 ppm to 25 ppm, and now the target is oriented towards the 9 ppm level. The evolution of burning technologies of combustion makes it possible to control the level of production of nitric oxides even from the source without being necessary to use "humid" methods. This, of course, opened the market for gas turbines because they can function even in areas with limited quality water reserves, such as maritime platforms and in the desert. In this paper, we are going to show that, although water injection is still used, "dry" control technologies of burning became favourite methods for the majority of users on the industrial power generators market. The great dependency between the creation of nitric oxides and the temperature reveals the effect of direct water or steam injection on reducing nitric oxides. Recent research showed that a reduction up to 85% of nitric oxides may be obtained by using the water or steam injection all together with the improvement of aerodynamic character of the burning room.

  18. Effects of ferric iron reduction and regeneration on nitrous oxide and methane emissions in a rice soil.

    Science.gov (United States)

    Huang, Bin; Yu, Kewei; Gambrell, Robert P

    2009-01-01

    A laboratory soil slurry experiment and an outdoor pot experiment were conducted to study effects of ferric iron (Fe(III)) reduction and regeneration on nitrous oxide (N(2)O) and methane (CH(4)) emissions in a rice (Oryza sativa L.) soil. The anoxic slurry experiment showed that enhancing microbial Fe(III) reduction by ferrihydrite amendment (40 mol Fe g(-1)) transitionally stimulated N(2)O production and lowered CH(4) production by 16% during an initial 33-day incubation. Increased regeneration of Fe(III) through a 4-day aeration period in the Fe-amended slurry compared to the control slurry reduced CH(4) emission by 30% in the subsequent 15-day anaerobic incubation. The pot experiment showed that ferrihydrite amendment (63 micromol Fe g(-1)) stimulated N(2)O fluxes in the days following flooding. The Fe amendment suppression on CH(4) emission was obscured in the early season but became significant upon reflooding in the mid- and late-seasons. As a result, seasonal CH(4) emission in Fe-amended pots was 26% lower than the control with a single 2-day drainage and 69% lower with a double 2-day drainage. The reduction in CH(4) emission upon reflooding from the Fe-amended pots was mainly attributed to the increased Fe(III) regeneration during drainage showing a mechanism of Fe(III) regeneration in mitigating CH(4) emission by short-term drainage in flooded soils.

  19. Assessment of the potential REDD+ as a new international support measure for GHG reduction

    Science.gov (United States)

    Kim, Y.; Ahn, J.; Kim, H.

    2016-12-01

    As part of the Paris Agreement, the mechanism for reducing emissions from deforestation and forest degradation in developing countries (REDD+) has high potential to simultaneously contribute to greenhouse gas (GHG) mitigation through forest conservation and poverty alleviation. Some of 162 Intended Nationally Determined Contributions (INDCs) submitted by 189 countries representing approximately 98.8% of global GHG emissions include not only unconditional mitigation goals but also conditional goals based on the condition of the provision of international support such as finance, technology transfer and capacity building. Considering REDD+ as one of the main mechanisms to support such work, this study selected ten countries from among Korea's 24 ODA priority partners, taking into consideration their conditional INDC targets alongside sectoral quantified targets such as land use, land-use change and forestry (LULUCF). The ten selected countries are Indonesia, Cambodia, Vietnam, Bangladesh, Sri Lanka, Ghana, Senegal, Colombia, Peru and Paraguay. Of these countries, most REDD+ projects have been conducted in Indonesia mainly due to the fact that 85% of the country's total GHG emissions are caused by forest conversion and peatland degradation. Therefore, GHG reduction rates and associated projected costs of the Indonesia's REDD+ projects were analyzed in order to offer guidance on the potential of REDD+ to contribute to other INDCs' conditional goals. The result showed that about 0.9 t CO2 ha-1 could be reduced at a cost of USD 23 per year. Applying this estimation to the Cambodian case, which has submitted a conditional INDC target of increasing its forest coverage by 60% (currently 57%) by 2030, suggests that financial support of USD 12.8 million would reduce CO2 emissions by about 5.1 million tones by increasing forest coverage. As there is currently no consideration of LULUCF in Cambodia's INDC, this result represents the opportunity for an additional contribution to

  20. Realizing potential savings of energy and emissions from efficient household appliances in India

    International Nuclear Information System (INIS)

    Parikh, Kirit S.; Parikh, Jyoti K.

    2016-01-01

    The paper projects households' stock of four major electricity consuming appliances till 2030 and explores policy options to accelerate adoption of more energy efficient appliances. India's rapid economic growth has enabled the growing middle class to buy household appliances in increasing numbers. The consequent rise in energy consumption and GHG emissions can be significantly reduced if consumers are motivated by awareness and options in the market to buy energy efficient appliances. India has introduced a star rating scheme for appliances, and even without incentives consumers purchase star-rated appliances. The stock of household appliances is projected using the data of a national sample survey of household consumption, observed sale of star-rated appliances and projected consumption distribution. Estimated savings in households' electricity consumption from just four appliances, ACs, refrigerators, TVs, and ceiling fans, for which data were available, range from 52 bKwh to 145 bkwh in 2030, reductions of 10–27%. The corresponding reduction in CO_2 emissions will be between 42 Mt and 116 Mt in 2030. With policies of finance and bulk procurement to reduce costs, emissions reduction can be 128 Mt in 2030, a reduction of 30%. - Highlights: • Estimates the stock of selected household appliances with 20 classes of rural and urban households in the years 2030 in India. • Assesses the economics of energy efficient appliances. • Estimates spread of selected energy efficient appliances. • Assesses savings in energy consumption and CO_2 emissions in four alternative scenarios. • Suggests policies to promote energy efficient appliances.

  1. Consumer-supplier-government triangular relations. Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

    Energy Technology Data Exchange (ETDEWEB)

    Parag, Yael; Darby, Sarah [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)

    2009-10-15

    The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens. (author)

  2. Consumer-supplier-government triangular relations: Rethinking the UK policy path for carbon emissions reduction from the UK residential sector

    Energy Technology Data Exchange (ETDEWEB)

    Parag, Yael [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)], E-mail: yael.parag@ouce.ox.ac.uk; Darby, Sarah [Environmental Change Institute, University of Oxford, OUCE, South Parks Road, Oxford OX1 3QY (United Kingdom)

    2009-10-15

    The UK residential (household) sector is responsible for approximately 30% of total carbon dioxide emissions and is often seen as the most promising in terms of early reductions. As most direct household emissions come from only two fuel sources, this paper critically examines how existing emissions reduction policies for the sector shape - and are shaped by - relations between the three main groups of actor in this policy domain: central government, gas and electricity suppliers, and energy users. Focusing on relations between three dyads (government-suppliers, suppliers-consumers and consumers-government) enables us to examine aspects of demand reduction that have often been overlooked to date. By 'relations' we refer to services, power relationships and flows of capital and information, as well as less easily defined elements such as loyalty, trust and accountability. The paper argues that the chosen government policy path to deliver demand reduction, which heavily emphasises the suppliers' role, suffers from principal-agent problems, fails to align consumers and supplier interests toward emissions reduction, and does not yet portray a lower-carbon future in positive terms. It suggests that more attention should be paid to government-consumer relations, recognising that energy consumers are also citizens.

  3. Analysis of potential for reducing emissions of greenhouse gases in municipal solid waste in Brazil, in the state and city of Rio de Janeiro

    International Nuclear Information System (INIS)

    Loureiro, S.M.; Rovere, E.L.L.; Mahler, C.F.

    2013-01-01

    Highlights: ► We constructed future scenarios of emissions of greenhouse gases in waste. ► Was used the IPCC methodology for calculating emission inventories. ► We calculated the costs of abatement for emissions reduction in landfill waste. ► The results were compared to Brazil, state and city of Rio de Janeiro. ► The higher the environmental passive, the greater the possibility of use of biogas. - Abstract: This paper examines potential changes in solid waste policies for the reduction in GHG for the country of Brazil and one of its major states and cities, Rio de Janeiro, from 2005 to 2030. To examine these policy options, trends in solid waste quantities and associated GHG emissions are derived. Three alternative policy scenarios are evaluated in terms of effectiveness, technology, and economics and conclusions posited regarding optimal strategies for Brazil to implement. These scenarios are been building on the guidelines for national inventories of GHG emissions (IPCC, 2006) and adapted to Brazilian states and municipalities’ boundaries. Based on the results, it is possible to say that the potential revenue from products of solid waste management is more than sufficient to transform the current scenario in this country into one of financial and environmental gains, where the negative impacts of climate change have created a huge opportunity to expand infrastructure for waste management

  4. Avoided emissions of a fuel-efficient biomass cookstove dwarf embodied emissions

    Directory of Open Access Journals (Sweden)

    D.L. Wilson

    2016-06-01

    Full Text Available Three billion people cook their food on biomass-fueled fires. This practice contributes to the anthropogenic radiative forcing. Fuel-efficient biomass cookstoves have the potential to reduce CO2-equivalent emissions from cooking, however, cookstoves made from modern materials and distributed through energy-intensive supply chains have higher embodied CO2-equivalent than traditional cookstoves. No studies exist examining whether lifetime emissions savings from fuel-efficient biomass cookstoves offset embodied emissions, and if so, by what margin. This paper is a complete life cycle inventory of “The Berkeley–Darfur Stove,” disseminated in Sudan by the non-profit Potential Energy. We estimate the embodied CO2-equivalent in the cookstove associated with materials, manufacturing, transportation, and end-of-life is 17 kg of CO2-equivalent. Assuming a mix of 55% non-renewable biomass and 45% renewable biomass, five years of service, and a conservative 35% reduction in fuel use relative to a three-stone fire, the cookstove will offset 7.5 tonnes of CO2-equivalent. A one-to-one replacement of a three-stone fire with the cookstove will save roughly 440 times more CO2-equivalent than it “costs” to create and distribute. Over its five-year life, we estimate the total use-phase emissions of the cookstove to be 13.5 tonnes CO2-equivalent, and the use-phase accounts for 99.9% of cookstove life cycle emissions. The dominance of use-phase emissions illuminate two important insights: (1 without a rigorous program to monitor use-phase emissions, an accurate estimate of life cycle emissions from biomass cookstoves is not possible, and (2 improving a cookstove's avoided emissions relies almost exclusively on reducing use-phase emissions even if use-phase reductions come at the cost of substantially increased non-use-phase emissions.

  5. Game Theoretic Analysis of Carbon Emission Reduction and Sales Promotion in Dyadic Supply Chain in Presence of Consumers’ Low-Carbon Awareness

    Directory of Open Access Journals (Sweden)

    Liangjie Xia

    2014-01-01

    Full Text Available The paper studies how the combination of the manufacturer’s carbon emission reduction and the retailer’s emission reduction relevant promotion impacts the performances of a dyadic supply chain in low-carbon environment. We consider three typical scenarios, that is, centralized and decentralized without or with side-payment. We compare measures of supply chain performances, such as profitabilities, emission reduction efficiencies, and effectiveness, in these scenarios. To improve chain-wide performances, a new side-payment contract is designed to coordinate the supply chain and numerical experiments are also conducted. We find the following. (1 In decentralized setting, the retailer will provide emission cutting allowance to the manufacturer only if their unit product profit margin is higher enough than the manufacturer’s, and the emission reduction level of per unit product is a monotonically increasing function with respect to the cost pooling proportion provided by the retailer; (2 the new side-payment contract can coordinate the dyadic supply chain successfully due to its integrating sales promotion effort and emission reduction input, which results in system pareto optimality under decentralized individual rationality but achieves a collective rationality effect in the centralized setting; (3 when without external force’s regulation, consumers’ low-carbon awareness is to enhance consumers’ utility and decrease profits of supply chain firms.

  6. Predator-induced reduction of freshwater carbon dioxide emissions

    Science.gov (United States)

    Atwood, Trisha B.; Hammill, Edd; Greig, Hamish S.; Kratina, Pavel; Shurin, Jonathan B.; Srivastava, Diane S.; Richardson, John S.

    2013-03-01

    Predators can influence the exchange of carbon dioxide between ecosystems and the atmosphere by altering ecosystem processes such as decomposition and primary production, according to food web theory. Empirical knowledge of such an effect in freshwater systems is limited, but it has been suggested that predators in odd-numbered food chains suppress freshwater carbon dioxide emissions, and predators in even-numbered food chains enhance emissions. Here, we report experiments in three-tier food chains in experimental ponds, streams and bromeliads in Canada and Costa Rica in the presence or absence of fish (Gasterosteus aculeatus) and invertebrate (Hesperoperla pacifica and Mecistogaster modesta) predators. We monitored carbon dioxide fluxes along with prey and primary producer biomass. We found substantially reduced carbon dioxide emissions in the presence of predators in all systems, despite differences in predator type, hydrology, climatic region, ecological zone and level of in situ primary production. We also observed lower amounts of prey biomass and higher amounts of algal and detrital biomass in the presence of predators. We conclude that predators have the potential to markedly influence carbon dioxide dynamics in freshwater systems.

  7. Revised emission factors for gas engines including start/stop emissions

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Malene; Boll Illerup, J.; Birr-Petersen, K.

    2008-06-15

    Liberalisation of the electricity market has led to Danish gas engine plants increasingly converting to the spot and regulating power markets. In order to offer regulating power, plants need to be able to start and stop the engines at the plants quickly. The liberalisation causes a considerable change of operation practice of the engines e.g. less full load operation hours /year. The project provides an inventory determining the scale of the emissions during the start and stop sequence as well as proposals for engine modifications aimed at reducing start/stop emissions. This report includes calculation of emission factors as well as an inventory of total emissions and reduction potentials. (au)

  8. Automatic emissive probe apparatus for accurate plasma and vacuum space potential measurements

    Science.gov (United States)

    Jianquan, LI; Wenqi, LU; Jun, XU; Fei, GAO; Younian, WANG

    2018-02-01

    We have developed an automatic emissive probe apparatus based on the improved inflection point method of the emissive probe for accurate measurements of both plasma potential and vacuum space potential. The apparatus consists of a computer controlled data acquisition card, a working circuit composed by a biasing unit and a heating unit, as well as an emissive probe. With the set parameters of the probe scanning bias, the probe heating current and the fitting range, the apparatus can automatically execute the improved inflection point method and give the measured result. The validity of the automatic emissive probe apparatus is demonstrated in a test measurement of vacuum potential distribution between two parallel plates, showing an excellent accuracy of 0.1 V. Plasma potential was also measured, exhibiting high efficiency and convenient use of the apparatus for space potential measurements.

  9. Potential emissions reduction in road transport sector using biofuel in developing countries

    Science.gov (United States)

    Liaquat, A. M.; Kalam, M. A.; Masjuki, H. H.; Jayed, M. H.

    2010-10-01

    Use of biofuels as transport fuel has high prospect in developing countries as most of them are facing severe energy insecurity and have strong agricultural sector to support production of biofuels from energy crops. Rapid urbanization and economic growth of developing countries have spurred air pollution especially in road transport sector. The increasing demand of petroleum based fuels and their combustion in internal combustion (IC) engines have adverse effect on air quality, human health and global warming. Air pollution causes respiratory problems, adverse effects on pulmonary function, leading to increased sickness absenteeism and induces high health care service costs, premature birth and even mortality. Production of biofuels promises substantial improvement in air quality through reducing emission from biofuel operated automotives. Some of the developing countries have started biofuel production and utilization as transport fuel in local market. This paper critically reviews the facts and prospects of biofuel production and utilization in developing countries to reduce environmental pollution and petro dependency. Expansion of biofuel industries in developing countries can create more jobs and increase productivity by non-crop marginal lands and wastelands for energy crops plantation. Contribution of India and China in biofuel industry in production and utilization can dramatically change worldwide biofuel market and leap forward in carbon cut as their automotive market is rapidly increasing with a souring proportional rise of GHG emissions.

  10. Dose assessment for potential radionuclide emissions from stacks on the Hanford Site: NESHAP compliance

    International Nuclear Information System (INIS)

    Davis, W.E.; Barnett, J.M.; Kenoyer, J.L.

    1994-03-01

    The purpose of this document is to present the assessment results for the registered stacks on the Hanford Site for potential emissions, i.e. emissions with no control devices in place. Further, the document will identify those stacks requiring continuous monitoring, i.e. the effective dose equivalent from potential emissions >0.1 mrem/yr. The stack assessment of potential emissions was performed on 84 registered stacks on the Hanford Site. These emission sources represent individual point sources presently registered under Washington Administrative code 246-247 with the Washington Department of Health. The methods used in assessing the potential emissions from the stacks are described

  11. Detection from space of a reduction in anthropogenic emissions of nitrogen oxides during the Chinese economic downturn

    Science.gov (United States)

    Lin, J.-T.; McElroy, M. B.

    2011-08-01

    Rapid economic and industrial development in China and relatively weak emission controls have resulted in significant increases in emissions of nitrogen oxides (NOx) in recent years, with the exception of late 2008 to mid 2009 when the economic downturn led to emission reductions detectable from space. Here vertical column densities (VCDs) of tropospheric NO2 retrieved from satellite observations by SCIAMACHY, GOME-2 and OMI (both by KNMI and by NASA) are used to evaluate changes in emissions of NOx from October 2004 to February 2010 identifying impacts of the economic downturn. Data over polluted regions of Northern East China suggest an increase of 27-33 % in 12-month mean VCD of NO2 prior to the downturn, consistent with an increase of 49 % in thermal power generation (TPG) reflecting the economic growth. More detailed analysis is used to quantify changes in emissions of NOx in January over the period 2005-2010 when the effect of the downturn was most evident. The GEOS-Chem model is employed to evaluate the effect of changes in chemistry and meteorology on VCD of NO2. This analysis indicates that emissions decreased by 20 % from January 2008 to January 2009, close to the reduction of 18 % in TPG that occurred over the same interval. A combination of three independent approaches indicates that the economic downturn was responsible for a reduction in emissions by 9-11 % in January 2009 with an additional decrease of 10 % attributed to the slow-down in industrial activity associated with the coincident celebration of the Chinese New Year; errors in the estimate are most likely less than 3.4 %.

  12. Options and potentials to mitigate N2O emissions from wheat and maize fields in China: a meta-analysis

    Science.gov (United States)

    Sun, W.; Li, X.

    2017-12-01

    Upland croplands are the main source of N2O emission. Mitigation of N2O emissions from upland croplands will greatly contribute to an overall reduction of greenhouse gases from agriculture. We performed a meta-analysis to investigate the mitigation options and potential of N2O emissions from wheat and maize fields in China. Results showed that application of inhibitors in wheat and maize fields reduced36‒46% of the N2O emissions with an increase in crop yield. Cutting the application rates of nitrogen fertilizers by no more than 30% could reduce N2O emissions by 10‒18%without crop yield loss. Applications of slow (controlled-) release fertilizer fertilizers and incorporations of crop residues can significantly mitigate N2O emission from wheat fields, but this mitigation is not statistically significant in maize fields. The gross N2O emission could be reduced by 9.3‒13.9Gg N2O-N per wheat season and 10.5‒23.2 Gg N2O-N per maize season when different mitigation options are put into practices. The mitigation potential (MP) in wheat cultivation is particularly notable for Henan, Shandong, Hebei and Anhui Province, contributing 53% to the total MP in wheat fields. Heilongjiang, Jilin, Shandong, Hebei and Henan Province showed high MP in maize cultivation, accounting for approximately 50% of the total MP in maize fields.

  13. Continuous reduction of cyclic adsorbed and desorbed NO{sub x} in diesel emission using nonthermal plasma

    Energy Technology Data Exchange (ETDEWEB)

    Kuwahara, Takuya [Department of Products Engineering and Environmental Management, Nippon Institute of Technology, 4-1 Gakuendai, Miyashiro-machi, Minamisaitama, Saitama 345-8501 (Japan); Nakaguchi, Harunobu; Kuroki, Tomoyuki [Department of Mechanical Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Sakai 599-8531 (Japan); Okubo, Masaaki, E-mail: mokubo@me.osakafu-u.ac.jp [Department of Mechanical Engineering, Osaka Prefecture University, 1-1 Gakuen-cho, Naka-ku, Sakai 599-8531 (Japan)

    2016-05-05

    Highlights: • High-efficiency continuous diesel NO{sub x} reduction method is proposed. • Characteristics of diesel NO{sub x} adsorption and desorption on adsorbent is provided. • Efficiency of NO{sub x} reduction with nonthermal plasma is evaluated. • Efficiency of NO{sub x} reduction with exhaust gas component recirculation is evaluated. • High NO{sub x} removal efficiency equal to only 1.0% penalty of engine power is achieved. - Abstract: Considering the recent stringent regulations governing diesel NO{sub x} emission, an aftertreatment system for the reduction of NO{sub x} in the exhaust gas has been proposed and studied. The proposed system is a hybrid method combining nonthermal plasma and NO{sub x} adsorbent. The system does not require precious metal catalysts or harmful chemicals such as urea and ammonia. In the present system, NO{sub x} in diesel emission is treated by adsorption and desorption by adsorbent as well as nonthermal plasma reduction. In addition, the remaining NO{sub x} in the adsorbent is desorbed again in the supplied air by residual heat. The desorbed NO{sub x} in air recirculates into the intake of the engine, and this process, i.e., exhaust gas components’ recirculation (EGCR) achieves NO{sub x} reduction. Alternate utilization of two adsorption chambers in the system can achieve high-efficiency NO{sub x} removal continuously. An experiment with a stationary diesel engine for electric power generation demonstrates an energy efficiency of 154 g(NO{sub 2})/kWh for NO{sub x} removal and continuous NO{sub x} reduction of 70.3%. Considering the regulation against diesel emission in Japan, i.e., the new regulation to be imposed on vehicles of 3.5–7.5 ton since 2016, the present aftertreatment system fulfills the requirement with only 1.0% of engine power.

  14. Energy saving and emission reduction: A project of coal-resource integration in Shanxi Province, China

    International Nuclear Information System (INIS)

    Zhang Jianjun; Fu Meichen; Geng Yuhuan; Tao Jin

    2011-01-01

    The small or middle coal mines with illegal operations in developing countries or regions can cause bad energy waste and environmental disruption. The project of coal-resource integration in Shanxi Province of China gives a new idea or an approach to energy saving and emission reduction. It is a social- and economic-ecological project. The paper shows the targets of energy saving and emission reduction in Shanxi Province, and analyses the aims, significance, design process and implementation of the integration project. Based on that, the paper discusses the challenges and opportunities the project brings. The analysis shows that the project of coal-resource integration in developing countries or regions can effectively improve mining technologies, collect capital and impel international cooperation and exchange. Finally, the paper analyses the concerns about the future, including the possible problems of implementation period, industrial updating, environmental impact and re-employment. However, the successful integration of coal resources can mitigate energy crisis and climate crisis and promote cleaner production effectively. - Highlights: → Coal-resource integration gives a new idea or an approach to energy saving and emission reduction. → Coal-resource integration mitigates climate crisis and promotes cleaner production. → Coal-resource integration brings challenges and opportunities to traditional mining industries.

  15. Contribution of cooperative sector recycling to greenhouse gas emissions reduction: A case study of Ribeirão Pires, Brazil

    International Nuclear Information System (INIS)

    King, Megan F.; Gutberlet, Jutta

    2013-01-01

    Highlights: • Cooperative recycling achieves environmental, economic and social objectives. • We calculate GHG emissions reduction for a recycling cooperative in São Paulo, Brazil. • The cooperative merits consideration as a Clean Development Mechanism (CDM) project. • A CDM project would enhance the achievements of the recycling cooperative. • National and local waste management policies support the recycling cooperative. - Abstract: Solid waste, including municipal waste and its management, is a major challenge for most cities and among the key contributors to climate change. Greenhouse gas emissions can be reduced through recovery and recycling of resources from the municipal solid waste stream. In São Paulo, Brazil, recycling cooperatives play a crucial role in providing recycling services including collection, separation, cleaning, stocking, and sale of recyclable resources. The present research attempts to measure the greenhouse gas emission reductions achieved by the recycling cooperative Cooperpires, as well as highlight its socioeconomic benefits. Methods include participant observation, structured interviews, questionnaire application, and greenhouse gas accounting of recycling using a Clean Development Mechanism methodology. The results show that recycling cooperatives can achieve important energy savings and reductions in greenhouse gas emissions, and suggest there is an opportunity for Cooperpires and other similar recycling groups to participate in the carbon credit market. Based on these findings, the authors created a simple greenhouse gas accounting calculator for recyclers to estimate their emissions reductions

  16. Contribution of cooperative sector recycling to greenhouse gas emissions reduction: A case study of Ribeirão Pires, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    King, Megan F., E-mail: mfking@uvic.ca [The Community-Based Research Laboratory, Department of Geography, University of Victoria, PO Box 3060 STN CSC, Victoria, BC V8W 3R4 (Canada); Gutberlet, Jutta, E-mail: gutber@uvic.ca [Department of Geography, University of Victoria, PO Box 3060 STN CSC, Victoria, BC V8W 3R4 (Canada)

    2013-12-15

    Highlights: • Cooperative recycling achieves environmental, economic and social objectives. • We calculate GHG emissions reduction for a recycling cooperative in São Paulo, Brazil. • The cooperative merits consideration as a Clean Development Mechanism (CDM) project. • A CDM project would enhance the achievements of the recycling cooperative. • National and local waste management policies support the recycling cooperative. - Abstract: Solid waste, including municipal waste and its management, is a major challenge for most cities and among the key contributors to climate change. Greenhouse gas emissions can be reduced through recovery and recycling of resources from the municipal solid waste stream. In São Paulo, Brazil, recycling cooperatives play a crucial role in providing recycling services including collection, separation, cleaning, stocking, and sale of recyclable resources. The present research attempts to measure the greenhouse gas emission reductions achieved by the recycling cooperative Cooperpires, as well as highlight its socioeconomic benefits. Methods include participant observation, structured interviews, questionnaire application, and greenhouse gas accounting of recycling using a Clean Development Mechanism methodology. The results show that recycling cooperatives can achieve important energy savings and reductions in greenhouse gas emissions, and suggest there is an opportunity for Cooperpires and other similar recycling groups to participate in the carbon credit market. Based on these findings, the authors created a simple greenhouse gas accounting calculator for recyclers to estimate their emissions reductions.

  17. Is There a Future for Nuclear Power? Wind and Emission Reduction Targets in Fossil-Fuel Alberta.

    Science.gov (United States)

    van Kooten, G Cornelis; Duan, Jun; Lynch, Rachel

    2016-01-01

    This paper explores the viability of relying on wind power to replace upwards of 60% of electricity generation in Alberta that would be lost if coal-fired generation is phased out. Using hourly wind data from 17 locations across Alberta, we are able to simulate the potential wind power output available to the Alberta grid when modern, 3.5 MW-capacity wind turbines are spread across the province. Using wind regimes for the years 2006 through 2015, we find that available wind power is less than 60% of installed capacity 98% of the time, and below 30% of capacity 74% of the time. There is only a small amount of correlation between wind speeds at different locations, but yet it remains necessary to rely on fossil fuel generation. Then, based on the results from a grid allocation model, we find that CO2 emissions can be reduced by about 30%, but only through a combination of investment in wind energy and reliance on purchases of hydropower from British Columbia. Only if nuclear energy is permitted into the generation mix would Alberta be able to meet its CO2-emissions reduction target in the electricity sector. With nuclear power, emissions can be reduced by upwards of 85%.

  18. Is There a Future for Nuclear Power? Wind and Emission Reduction Targets in Fossil-Fuel Alberta

    Science.gov (United States)

    Duan, Jun; Lynch, Rachel

    2016-01-01

    This paper explores the viability of relying on wind power to replace upwards of 60% of electricity generation in Alberta that would be lost if coal-fired generation is phased out. Using hourly wind data from 17 locations across Alberta, we are able to simulate the potential wind power output available to the Alberta grid when modern, 3.5 MW-capacity wind turbines are spread across the province. Using wind regimes for the years 2006 through 2015, we find that available wind power is less than 60% of installed capacity 98% of the time, and below 30% of capacity 74% of the time. There is only a small amount of correlation between wind speeds at different locations, but yet it remains necessary to rely on fossil fuel generation. Then, based on the results from a grid allocation model, we find that CO2 emissions can be reduced by about 30%, but only through a combination of investment in wind energy and reliance on purchases of hydropower from British Columbia. Only if nuclear energy is permitted into the generation mix would Alberta be able to meet its CO2-emissions reduction target in the electricity sector. With nuclear power, emissions can be reduced by upwards of 85%. PMID:27902712

  19. Modeling of policies for reduction of GHG emissions in energy sector using ANN: case study-Croatia (EU).

    Science.gov (United States)

    Bolanča, Tomislav; Strahovnik, Tomislav; Ukić, Šime; Stankov, Mirjana Novak; Rogošić, Marko

    2017-07-01

    This study describes the development of tool for testing different policies for reduction of greenhouse gas (GHG) emissions in energy sector using artificial neural networks (ANNs). The case study of Croatia was elaborated. Two different energy consumption scenarios were used as a base for calculations and predictions of GHG emissions: the business as usual (BAU) scenario and sustainable scenario. Both of them are based on predicted energy consumption using different growth rates; the growth rates within the second scenario resulted from the implementation of corresponding energy efficiency measures in final energy consumption and increasing share of renewable energy sources. Both ANN architecture and training methodology were optimized to produce network that was able to successfully describe the existing data and to achieve reliable prediction of emissions in a forward time sense. The BAU scenario was found to produce continuously increasing emissions of all GHGs. The sustainable scenario was found to decrease the GHG emission levels of all gases with respect to BAU. The observed decrease was attributed to the group of measures termed the reduction of final energy consumption through energy efficiency measures.

  20. What are the opportunities related to the trading of emission reductions in the electricity market?; Quelles sont les opportunites reliees aux echanges de reduction d'emission dans le marche de l'electricite

    Energy Technology Data Exchange (ETDEWEB)

    Lemieux, M. [Gaz Metropolitain, Montreal, PQ (Canada)

    2003-07-01

    Gaz Metropolitain distributes approximately 97 per cent of the natural gas used in Quebec. It operates an 8300 kilometre (km) pipeline network and has 150,000 customers. Revenues in 2002 were 1.6 billion. Since 1990, Gaz Metropolitain has reduced its greenhouse gas (GHG) emissions by 30 per cent. After a brief look at the sources of energy in Quebec and their associated GHG emissions, the author discussed the viability of a closed emission trading system with only a limited number of permits. The system could be opened up through the creation of credits in excluded sectors. Under the Kyoto Protocol, countries are allocated emitting permits in an open system since the credits are included in the Protocol. In Canada, the federal government has announced that a domestic emission trading system will be implemented for large emitters. The thermal production sector will be covered by a system consisting of an exchange of rights. Electricity produced from renewable energy sources would be excluded from the system, and it is yet to be decided whether credits could be generated. The creation of credits under the Canadian plan was reviewed. The projects accepted under the Greenhouse Gas Emission Reduction Trading Pilot (GERT) were examined and the development of the project was described. Some of the projects under GERT include a new dam in Newfoundland, a wind power project in Alberta, and a biomass cogeneration project in British Columbia to name but a few. It was noted that quantifying emissions in the case of indirect reductions is complex but feasible. 3 refs., tabs., figs.

  1. Shale gas production: potential versus actual greenhouse gas emissions

    OpenAIRE

    O'Sullivan, Francis Martin; Paltsev, Sergey

    2012-01-01

    Estimates of greenhouse gas (GHG) emissions from shale gas production and use are controversial. Here we assess the level of GHG emissions from shale gas well hydraulic fracturing operations in the United States during 2010. Data from each of the approximately 4000 horizontal shale gas wells brought online that year are used to show that about 900 Gg CH[subscript 4] of potential fugitive emissions were generated by these operations, or 228 Mg CH[subscript 4] per well—a figure inappropriately ...

  2. Greenhouse Gas and Ammonia Emissions from Different Stages of Liquid Manure Management Chains: Abatement Options and Emission Interactions.

    Science.gov (United States)

    Mohankumar Sajeev, Erangu Purath; Winiwarter, Wilfried; Amon, Barbara

    2018-01-01

    Farm livestock manure is an important source of ammonia and greenhouse gases. Concerns over the environmental impact of emissions from manure management have resulted in research efforts focusing on emission abatement. However, questions regarding the successful abatement of manure-related emissions remain. This study uses a meta-analytical approach comprising 89 peer-reviewed studies to quantify emission reduction potentials of abatement options for liquid manure management chains from cattle and pigs. Analyses of emission reductions highlight the importance of accounting for interactions between emissions. Only three out of the eight abatement options considered (frequent removal of manure, anaerobic digesters, and manure acidification) reduced ammonia (3-60%), nitrous oxide (21-55%), and methane (29-74%) emissions simultaneously, whereas in all other cases, tradeoffs were identified. The results demonstrate that a shift from single-stage emission abatement options towards a whole-chain perspective is vital in reducing overall emissions along the manure management chain. The study also identifies some key elements like proper clustering, reporting of influencing factors, and explicitly describing assumptions associated with abatement options that can reduce variability in emission reduction estimates. Prioritization of abatement options according to their functioning can help to determine low-risk emission reduction options, specifically options that alter manure characteristics (e.g., reduced protein diets, anaerobic digestion, or slurry acidification). These insights supported by comprehensive emission measurement studies can help improve the effectiveness of emission abatement and harmonize strategies aimed at reducing air pollution and climate change simultaneously. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  3. Reduction in nitrogen oxide emissions by boiler construction companies in the USA

    Energy Technology Data Exchange (ETDEWEB)

    Kotler, V.R.

    1989-11-01

    Explains that in the USA greater emphasis is placed on reducing pollutant emissions by altering the combustion process than by cleaning flue gases. Results of a joint USA/FRG program show that NO{sub x} concentrations may vary greatly according to the type of slag removal (solid or liquid) and the location and type of burners used. Examines variants and demonstrates that the most effective method of reducing NO{sub x} emissions from large-scale pulverized-coal fired boilers is three-stage combustion used in conjunction with a flue gas cleaning method such as selective catalytic reduction (cyclone burners). Trials found that this method results in a 60% drop in NO{sub x} emissions and, if limestone is added to the tertiary air, a 20% drop in SO{sub 2}. Best results from an economic aspect were achieved when gas was burned in the extra burners. 6 refs.

  4. Grooved floor system for cattle housing: ammonia emission reduction and good slip resistance

    NARCIS (Netherlands)

    Swierstra, D.; Braam, C.R.; Smits, M.C.J.

    2001-01-01

    To improve the slip resistance of solid floors in dairy cow houses and to achieve the ammonia emission reduction prescribed by the Dutch government, precast concrete floors with grooves and a dung scraper were investigated. The grooves parallel to the alley had 160 mm center-to-center spacing and

  5. How to ensure greenhouse gas emission reductions by increasing the use of biofuels? - Suitability of the European Union sustainability criteria

    International Nuclear Information System (INIS)

    Soimakallio, Sampo; Koponen, Kati

    2011-01-01

    Biofuels are promoted in many parts of the world. However, concern of environmental and social problems have grown due to increased production of biofuels. Therefore, many initiatives for sustainability criteria have been announced. As a part of the European Union (EU) renewable energy promotion directive (RED), the EU has introduced greenhouse gas (GHG) emission-saving requirements for biofuels along with the first-ever mandate methodology to calculate the GHG emission reduction. As explored in this paper, the RED methodology, based on life-cycle assessment (LCA) approach, excludes many critical issues. These include indirect impacts due to competition for land, biomass and other auxiliary inputs. Also, timing issues, allocation problems, and uncertainty of individual parameters are not yet considered adequately. Moreover, the default values provided in the RED for the GHG balances of biofuels may significantly underestimate their actual impacts. We conclude that the RED methodology cannot ensure the intended GHG emission reductions of biofuels. Instead, a more comprehensive approach is required along with additional data and indicators. Even if it may be very difficult to verify the GHG emission reductions of biofuels in practice, it is necessary to consider the uncertainties more closely, in order to mitigate climate change effectively. -- Highlights: → The EU introduced mandatory criteria for greenhouse gas emissions of biofuels. → The aim of the criteria is to ensure reduction in GHG emissions. → We analysed and discussed the suitability of the criteria. → The criteria may significantly underestimate the actual GHG emissions. → A more comprehensive approach is required along with additional data and indicators.

  6. Potential for reducing paper mill energy use and carbon dioxide emissions through plant-wide energy audits: A case study in China

    International Nuclear Information System (INIS)

    Kong, Lingbo; Price, Lynn; Hasanbeigi, Ali; Liu, Huanbin; Li, Jigeng

    2013-01-01

    Highlights: ► We audited a paper mill in China to reduce its energy use and CO 2 emissions. ► The energy use and CO 2 emissions of the mill and each paper machine are presented. ► The energy saving potential for the paper machine is estimated at 8–37%. ► The energy saving potential is 967.8 TJ, equal to 14.4% of the mill’s energy use. ► The CO 2 reduction potential is 93,453 tonnes CO 2 for the studied paper mill. -- Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO 2 ) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO 2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO 2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO 2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8 terajoules (TJ), and the total CO 2 mitigation potential is equal to 93,453 tonnes CO 2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO 2 emissions during the audit period.

  7. Emissions trading in transition economies: the link between international and domestic policy

    International Nuclear Information System (INIS)

    Evans, M.

    2003-01-01

    International emissions trading has the potential to significantly lower carbon mitigation costs and to promote environmentally friendly investment in transition economies. The design of domestic systems to complement international emissions trading will likely play a major role in emissions trading's effectiveness. This paper examines the benefits and challenges of proposed domestic systems and the related flows of emissions trading revenue in seller nations. The overwhelming majority of emissions available for sale will come from transition economies, which is why this article considers these countries as a group. Governments in countries such as Russia and Poland are interested in the potentially significant revenue they would reap from emissions trading, and some in those governments feel the money would best be used as general revenue for the government. Others argue that emissions trading should involve the private sector and other emitters in order to provide maximum incentives to reduce emissions and generate additional emissions trading revenue (the rules for international emissions trading explicitly allow this). Still others feel that special carbon mitigation funds would allow the government to maintain control yet stimulate additional emission reductions. Each policy contains its own set of challenges: stimulating further emission reductions, credibly monitoring emissions and emission reductions, or applying adequate fiscal accounting to the money flows

  8. Characterizing ammonia emissions from swine farms in eastern North Carolina: part 2--potential environmentally superior technologies for waste treatment.

    Science.gov (United States)

    Aneja, Viney P; Arya, S Pal; Rumsey, Ian C; Kim, D-S; Bajwa, K; Arkinson, H L; Semunegus, H; Dickey, D A; Stefanski, L A; Todd, L; Mottus, K; Robarge, W P; Williams, C M

    2008-09-01

    farm and Stokes farm). A flow-through dynamic chamber system and two sets of open-path Fourier transform infrared (OP-FTIR) spectrometers measured NH3 fluxes continuously from water-holding structures and emissions from housing units at the EST and conventional LST sites. A statistical-observational model for lagoon NH3 flux was developed using a multiple linear regression analysis of 15-min averaged NH3 flux data against the relevant environmental parameters measured at the two conventional farms during two different seasons of the year. This was used to compare the water-holding structures at ESTs with those from lagoons at conventional sites under similar environmental conditions. Percentage reductions in NH3 emissions from different components of each potential EST, as well as the whole farm on which the EST was located were evaluated from the estimated emissions from water-holding structures, barns, etc., all normalized by the appropriate nitrogen excretion rate at the potential EST farm, as well as from the appropriate conventional farm. This study showed that ammonia emissions were reduced by all but one potential EST for both experimental periods. However, on the basis of our evaluation results and analysis and available information in the scientific literature, the evaluated alternative technologies may require additional technical modifications to be qualified as unconditional ESTs relative to NH3 emissions reductions.

  9. Effects of Particle Filters and Selective Catalytic Reduction on In-Use Heavy-Duty Diesel Truck Emissions

    Science.gov (United States)

    Preble, C.; Cados, T.; Harley, R.; Kirchstetter, T.

    2016-12-01

    Heavy-duty diesel trucks (HDDT) are a major source of nitrogen oxides (NOx) and black carbon (BC) in urban environments, contributing to persistent ozone and particulate matter air quality problems. Diesel particle filters (DPFs) and selective catalytic reduction (SCR) systems that target PM and NOx emissions, respectively, have recently become standard equipment on new HDDT. DPFs can also be installed on older engines as a retrofit device. Previous work has shown that DPF and SCR systems can reduce NOx and BC emissions by up to 70% and 90%, respectively, compared to modern trucks without these after-treatment controls (Preble et al., ES&T 2015). DPFs can have the undesirable side-effect of increasing ultrafine particle (UFP) and nitrogen dioxide (NO2) emissions. While SCR systems can partially mitigate DPF-related NO2 increases, these systems can emit nitrous oxide (N2O), a potent greenhouse gas. We report new results from a study of HDDT emissions conducted in fall 2015 at the Port of Oakland and Caldecott Tunnel in California's San Francisco Bay Area. We report pollutant emission factors (g kg-1) for emitted NOx, NO2, BC, PM2.5, UFP, and N2O on a truck-by-truck basis. Using a roadside license plate recognition system, we categorize each truck by its engine model year and installed after-treatment controls. From this, we develop emissions profiles for trucks with and without DPF and SCR. We evaluate the effectiveness of these devices as a function of their age to determine whether degradation is an issue. We also compare the emission profiles of trucks traveling at low speeds along a level, arterial road en route to the port and at high speeds up a 4% grade highway approaching the tunnel. Given the climate impacts of BC and N2O, we also examine the global warming potential of emissions from trucks with and without DPF and SCR.

  10. Options for Energy Conservation and Emission Reductions in Transportation Means for Goods Distribution

    DEFF Research Database (Denmark)

    Jørgensen, Kaj

    1996-01-01

    The report contains an analysis of the technological options and potentials for development of transportation means with low energy consumption and emissions. The main focus is on transportation means utilised in the distribution of groceries.......The report contains an analysis of the technological options and potentials for development of transportation means with low energy consumption and emissions. The main focus is on transportation means utilised in the distribution of groceries....

  11. What are the opportunities related to the trading of emission reductions in the electricity market?

    International Nuclear Information System (INIS)

    Lemieux, M.

    2003-01-01

    Gaz Metropolitain distributes approximately 97 per cent of the natural gas used in Quebec. It operates an 8300 kilometre (km) pipeline network and has 150,000 customers. Revenues in 2002 were 1.6 billion. Since 1990, Gaz Metropolitain has reduced its greenhouse gas (GHG) emissions by 30 per cent. After a brief look at the sources of energy in Quebec and their associated GHG emissions, the author discussed the viability of a closed emission trading system with only a limited number of permits. The system could be opened up through the creation of credits in excluded sectors. Under the Kyoto Protocol, countries are allocated emitting permits in an open system since the credits are included in the Protocol. In Canada, the federal government has announced that a domestic emission trading system will be implemented for large emitters. The thermal production sector will be covered by a system consisting of an exchange of rights. Electricity produced from renewable energy sources would be excluded from the system, and it is yet to be decided whether credits could be generated. The creation of credits under the Canadian plan was reviewed. The projects accepted under the Greenhouse Gas Emission Reduction Trading Pilot (GERT) were examined and the development of the project was described. Some of the projects under GERT include a new dam in Newfoundland, a wind power project in Alberta, and a biomass cogeneration project in British Columbia to name but a few. It was noted that quantifying emissions in the case of indirect reductions is complex but feasible. 3 refs., tabs., figs

  12. China Energy and Emissions Paths to 2030

    Energy Technology Data Exchange (ETDEWEB)

    Fridley, David; Zheng, Nina; Zhou, Nan; Ke, Jing; Hasanbeigi, Ali; Morrow, Bill; Price, Lynn

    2011-01-14

    After over two decades of staggering economic growth and soaring energy demand, China has started taking serious actions to reduce its economic energy and carbon intensity by setting short and medium-term intensity reduction targets, renewable generation targets and various supporting policies and programs. In better understanding how further policies and actions can be taken to shape China's future energy and emissions trajectory, it is important to first identify where the largest opportunities for efficiency gains and emission reduction lie from sectoral and end-use perspectives. Besides contextualizing China's progress towards reaching the highest possible efficiency levels through the adoption of the most advanced technologies from a bottom-up perspective, the actual economic costs and benefits of adopting efficiency measures are also assessed in this study. This study presents two modeling methodologies that evaluate both the technical and economic potential of raising China's efficiency levels to the technical maximum across sectors and the subsequent carbon and energy emission implications through 2030. The technical savings potential by efficiency measure and remaining gap for improvements are identified by comparing a reference scenario in which China continues the current pace of with a Max Tech scenario in which the highest technically feasible efficiencies and advanced technologies are adopted irrespective of costs. In addition, from an economic perspective, a cost analysis of selected measures in the key industries of cement and iron and steel help quantify the actual costs and benefits of achieving the highest efficiency levels through the development of cost of conserved energy curves for the sectors. The results of this study show that total annual energy savings potential of over one billion tonne of coal equivalent exists beyond the expected reference pathway under Max Tech pathway in 2030. CO2 emissions will also peak earlier

  13. An Evaluation of the Potential for Shifting of Freight from Truck to Rail and Its Impacts on Energy Use and GHG Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Yan [Argonne National Lab. (ANL), Argonne, IL (United States); Vyas, Anant D. [Argonne National Lab. (ANL), Argonne, IL (United States); Guo, Zhaomiao [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-06-01

    This report summarizes our evaluation of the potential energy-use and GHG-emissions reduction achieved by shifting freight from truck to rail under a most-likely scenario. A sensitivity analysis is also included. The sensitivity analysis shows changes in energy use and GHG emissions when key parameters are varied. The major contribution and distinction from previous studies is that this study considers the rail level of service (LOS) and commodity movements at the origin-destination (O-D) level. In addition, this study considers the fragility and time sensitivity of each commodity type.

  14. Canada's potential role in the Clean Development Mechanism

    International Nuclear Information System (INIS)

    Pape-Salmon, A.

    2000-01-01

    The role that Canada might play in the Kyoto Protocol's Clean Development Mechanism (CDM) is discussed. The CDM prescribes the way in which industrialized countries could create emission reduction credits for greenhouse gas emission reduction projects in developing countries which, in turn they could use to meet their own commitments and possibly reduce their cost of compliance with the Kyoto Protocol. While Canada does not see itself as a CDM project investor, it strongly supports private sector involvement in the CDM and believes that it has a role to play in assisting CDM investments by the Canadian private sector by facilitating desirable outcomes via international negotiations on the rules and modalities for the CDM which would minimize transaction costs; give prominence to aspects that Canada recognizes as necessary precursors to mobilizing private sector involvement in CDM activities; maximize the flexibility for use of the CDM; allow for conversion of credits between different Kyoto Mechanisms; allow for the certification of emissions sequestration from sinks; and maximize the environmental and sustainable development benefits of CDM projects. Canada also supports, along with the other members of the 'Umbrella group', the fewest possible restrictions and significant autonomy to the private sector to implement a variety of project activities in developing countries. This report provides a detailed examination of the Canadian government's views on the CDM, Canada's participation in international emission reduction projects, the factors that drive Canadian demand for greenhouse gas emission reduction offsets and the potential demand for CDM offsets, Canada's greenhouse gas emission inventory and projections, the approach of Canadian corporate investors in the CDM and Canadian technology and expertise in greenhouse gas emission reductions. Various appendices to the report contain further details on a number of cooperation agreements between Canada and other

  15. Potential of Windbreak Trees to Reduce Carbon Emissions by Agricultural Operations in the US

    Directory of Open Access Journals (Sweden)

    William Ballesteros-Possu

    2017-04-01

    Full Text Available Along with sequestering C in forest, trees on farms are able to contribute to greenhouse mitigation through emission avoidance mechanisms. To evaluate the magnitude of these contributions, emission avoidance contributions for field and farmstead windbreak designs in regions across the United States were estimated, along with greenhouse gas (GHG emission budgets for corn, soybean, winter wheat, and potato operations. We looked at farming scenarios with large (600 ha, mid (300 ha, and small-size (60 ha farms containing farmsteads built before and after 2000, and growing different cropping systems. Windbreak scenarios were assumed to be up to 5% of the crop area for field windbreaks, while emission avoidance for farmstead windbreaks were assumed to provide a 10% and 25% reduction in energy usage for space conditioning and heating, respectively. Total reduction of C equivalent (CE emissions by windbreaks on farm systems ranged from a low of 0.9 Mg CE year−1 for a 60-ha farm with a home built before 2000 to 39.1 Mg CE year−1 for a 600-ha farm with a home built after 2000. By reducing fossil fuel usage from farm operations, windbreaks provide a promising strategy for reducing GHG emissions from agriculture in the USA.

  16. Using oily wastewater emulsified fuel in boiler: energy saving and reduction of air pollutant emissions.

    Science.gov (United States)

    Chen, Chun-Chi; Lee, Wen-Jhy

    2008-01-01

    The limited data for using emulsified oil have demonstrated its effectiveness in reducing flue gas pollutant emissions. The presence of a high concentration of toxic organic compounds in industrial wastewaters always presents significant problems. Therefore, this study was undertaken by using wastewater with COD of 9600 mg/L and total petroleum hydrocarbons-gasoline 440 mg/L for making an emulsified oil (wastewater content 20% with 0.1% surfactant) to evaluate the extent of reductions in both criteria pollutants and polycyclic aromatic hydrocarbons. For comparison, two other systems (heavy oil fuel and water-emulsified oil) were also conducted. The wastewater-emulsified oil fuel results in significant reductions in particulate matter (PM), NO(x), SO2, and CO as compared to heavy oil fuel and similar to those from water/oil emulsified fuel; for PM, it is better in wastewater-emulsified oil. The reductions of total PAH flue gas emissions are 38 and 30% for wastewater- and water-emulsified fuel, respectively; they are 63 and 44% for total BaP(eq), respectively. In addition to reducing flue gas pollutant emissions, the results also demonstrate that the use of wastewater-emulsified fuel in boiler operation provides several advantages: (1) safe disposal of industrial wastewater; and (2) energy savings of about 13%. Thus, wastewater/oil-emulsified fuel is highly suitable for use in boilers.

  17. Combined effect of fuel-design and after-treatment system on reduction of local and global emissions from CI engine.

    Science.gov (United States)

    Thiyagarajan, S; Geo, V Edwin; Martin, Leenus Jesu; Nagalingam, B

    2018-03-22

    This experimental study aims to mitigate harmful emissions from a CI engine using bio-energy with carbon capture and storage (BECCS) approach. The engine used for this experimental work is a single cylinder CI engine with a rated power of 5.2 kW at a constant speed of 1500 rpm. The BECCS approach is a combination of plant-based biofuels and carbon capture and storage (CCS) system. The whole investigation was done in four phases: (1) Substituting diesel with Karanja oil methyl ester (KOME) (2) Equal volume blending of Orange oil (ORG) with KOME (3) 20% blending of n-butanol (B) with KOME-ORG blend (4) CCS system with zeolite based non-selective catalytic reduction (NSCR) and mono ethanolamine (MEA) based selective non-catalytic reduction (SNCR) system with KOME-ORG + B20 blend. The experimental results show that substitution of diesel with KOME reduces smoke emission, but increases NO and CO 2 emission. KOME-ORG blend reduces CO 2 and smoke emissions with high NO emission due to combustion improvement. In comparison with the sole combustion of KOME at full load condition, the combination of KOME-ORG + B20 as bio-fuel with zeolite based post-combustion treatment system resulted in a maximum reduction of NO, smoke and CO 2 emission by 41%, 19% and 15% respectively.

  18. A framework for the assessment of the global potential of joint implementation

    International Nuclear Information System (INIS)

    Bollen, J.C.; Van Minnen, J.G.; Toet, A.M.C.; Kuik, O.J.; Bennis, M.

    1995-09-01

    Joint Implementation (JI) is a means for reaching cheaper solutions to CO 2 -emission reductions. The global potential for JI is defined as the portion of the necessary regional CO 2 -emission reductions to meet the goals defined for a target year that can be more cost-effectively implemented in other regions. The goals will come from multilateral negotiations and may be the starting point of any bilateral negotiation process concerning JI-agreements. The more the goals will take cost-effectiveness criteria into account the less scope there will be for additional JI-agreements. In cases where the goals are stricter, the globally required emission reductions will be larger and consequently larger emission reductions could be be achieved in other regions. However, as compared to the other cases presented in the report the potential for JI will be lower, since the potential is defined as a fraction of the necessary global emission reduction. JI could reduce the total costs of CO 2 -emission reduction by more than 75% compared to the situation without JI, depending on the initial distribution of CO 2 -targets, the target year and the scenario-assumptions. For donor countries the cost reductions could be more than 50%, even when it is assumed that the subsidies for emission reduction measures in receptor countries are 50% higher than the actual costs. In donor countries the resulting domestic CO 2 -emission reductions after JI could be more than 50% less than the original goals before JI. In comparison to other OECD regions (Japan, Oceania, and the United States), Western Europe's gains from JI are less. In other words, in a world market for JI projects, Western Europe could face strong competition. 7 figs., 25 tabs., 37 refs., 1 appendix

  19. Carbon emission reductions by substitution of improved cookstoves and cattle mosquito nets in a forest-dependent community

    Directory of Open Access Journals (Sweden)

    Somanta Chan

    2015-07-01

    Substitution of conventional cookstoves with improved cookstoves and the use of mosquito nets instead of fuelwood burning could result in using less fuelwood for the same amount of energy needed and thereby result in reduction of carbon emissions and deforestation. To realize this substitution, approximately US$ 15–25 MgCO2−1 is needed depending on discount rates and amounts of emission reduction. Substitution of cookstoves will have direct impacts on the livelihoods of forest-dependent communities and on forest protection. Financial incentives under voluntary and mandatory schemes are needed to materialize this substitution.

  20. Improvement of electron emission characteristics of porous silicon emitter by using cathode reduction and electrochemical oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Li, He; Wenjiang, Wang, E-mail: wwj@mail.xjtu.edu.cn; Xiaoning, Zhang

    2017-03-31

    Highlights: • An electron emitter based on porous silicon having the strong application potential was prepared in the studying. • A new simple and convenient post-treat technique was proposed to improve the electron emission properties of the PS emitter. • It demonstrated that the improving of the PS morphology and the oxygen distribution is very important to the PS emitter. - Abstract: A new simple and convenient post-treat technique combined the cathode reduction (CR) and electrochemical oxidation (ECO) was proposed to improve the electron emission properties of the surface-emitting cold cathodes based on the porous silicon (PS). It is demonstrated here that by introducing this new technique combined CR and ECO, the emission properties of the diode have been significantly improved than those as-prepared samples. The experimental results showed that the emission current densities and efficiencies of sample treated by CR were 62 μA/cm{sup 2} and 12.10‰, respectively, nearly 2 orders of magnitude higher than those of as-prepared sample. Furthermore, the CR-treated PS emitter shows higher repeatability and stability compared with the as-prepared PS emitter. The scanning electron microscope (SEM), atomic force microscope (AFM), energy dispersive spectrometer (EDS), furier transformed infrared (FTIR) spectroscopy results indicated that the improved mechanism is mainly due to the passivation of the PS, which not only improve the PS morphology by the passivation of the H{sup +} but also improve the uniformity of the oxygen content distribution in the whole PS layer. Therefore, the method combined the CR treatment and ECO is expected to be a valuable technique to enhance the electron emission characteristics of the PS emitter.

  1. Improvement of electron emission characteristics of porous silicon emitter by using cathode reduction and electrochemical oxidation

    International Nuclear Information System (INIS)

    Li, He; Wenjiang, Wang; Xiaoning, Zhang

    2017-01-01

    Highlights: • An electron emitter based on porous silicon having the strong application potential was prepared in the studying. • A new simple and convenient post-treat technique was proposed to improve the electron emission properties of the PS emitter. • It demonstrated that the improving of the PS morphology and the oxygen distribution is very important to the PS emitter. - Abstract: A new simple and convenient post-treat technique combined the cathode reduction (CR) and electrochemical oxidation (ECO) was proposed to improve the electron emission properties of the surface-emitting cold cathodes based on the porous silicon (PS). It is demonstrated here that by introducing this new technique combined CR and ECO, the emission properties of the diode have been significantly improved than those as-prepared samples. The experimental results showed that the emission current densities and efficiencies of sample treated by CR were 62 μA/cm"2 and 12.10‰, respectively, nearly 2 orders of magnitude higher than those of as-prepared sample. Furthermore, the CR-treated PS emitter shows higher repeatability and stability compared with the as-prepared PS emitter. The scanning electron microscope (SEM), atomic force microscope (AFM), energy dispersive spectrometer (EDS), furier transformed infrared (FTIR) spectroscopy results indicated that the improved mechanism is mainly due to the passivation of the PS, which not only improve the PS morphology by the passivation of the H"+ but also improve the uniformity of the oxygen content distribution in the whole PS layer. Therefore, the method combined the CR treatment and ECO is expected to be a valuable technique to enhance the electron emission characteristics of the PS emitter.

  2. Costs of certified emission reductions under the Clean Development Mechanism of the Kyoto Protocol

    International Nuclear Information System (INIS)

    Rahman, Shaikh M.; Kirkman, Grant A.

    2015-01-01

    This paper examines the cost structure of certified emission reductions (CERs) through various types of projects under the Clean Development Mechanism (CDM) of the Kyoto Protocol. Using the CDM project data, the costs of CERs and their variation across technology and over time and space are estimated by applying alternative functional forms and specifications. Results show that the average cost of CERs decreases with the project scale and duration, scale and duration effects significantly vary across project types, and there is an upward trend in costs. The results also show that the distribution of the projects in the CDM portfolio or a given location does not strictly follow the relative cost structure, nor does the distribution of the CDM projects in different host countries follow the principle of comparative advantage. More than 84% of the CDM portfolio consists of various energy projects with substantially higher costs of CERs than afforestation and reforestation, industrial and landfill gas reduction, and methane avoidance projects, which are only 12% of all projects. While per unit cost of abatement plays an important role in the bottom-up and top-down models to evaluate emission reduction potential and analyze policy alternatives, the findings contradict the presumption of such models that project investors seek out low-cost opportunities. At the aggregate level, the cost of CER by the projects in Asia and Europe is similar but higher than those hosted in Africa, Americas, and Oceania. Yet more than 83% of the projects in the CDM portfolio are located in Asia; more than 69% of the projects are in China and India alone. China appears to have a comparative advantage (i.e., lowest opportunity cost) in energy efficiency projects, while India has a comparative advantage in hydro power projects and Brazil has a comparative advantage in wind power projects. In contrast, energy efficiency category accounts for only 8% of the CDM projects in China, hydro power

  3. Reductions in emissions from deforestation from Indonesia’s moratorium on new oil palm, timber, and logging concessions

    Science.gov (United States)

    Busch, Jonah; Ferretti-Gallon, Kalifi; Engelmann, Jens; Wright, Max; Austin, Kemen G.; Stolle, Fred; Turubanova, Svetlana; Potapov, Peter V.; Margono, Belinda; Hansen, Matthew C.; Baccini, Alessandro

    2015-01-01

    To reduce greenhouse gas emissions from deforestation, Indonesia instituted a nationwide moratorium on new license areas (“concessions”) for oil palm plantations, timber plantations, and logging activity on primary forests and peat lands after May 2011. Here we indirectly evaluate the effectiveness of this policy using annual nationwide data on deforestation, concession licenses, and potential agricultural revenue from the decade preceding the moratorium. We estimate that on average granting a concession for oil palm, timber, or logging in Indonesia increased site-level deforestation rates by 17–127%, 44–129%, or 3.1–11.1%, respectively, above what would have occurred otherwise. We further estimate that if Indonesia’s moratorium had been in place from 2000 to 2010, then nationwide emissions from deforestation over that decade would have been 241–615 MtCO2e (2.8–7.2%) lower without leakage, or 213–545 MtCO2e (2.5–6.4%) lower with leakage. As a benchmark, an equivalent reduction in emissions could have been achieved using a carbon price-based instrument at a carbon price of $3.30–7.50/tCO2e (mandatory) or $12.95–19.45/tCO2e (voluntary). For Indonesia to have achieved its target of reducing emissions by 26%, the geographic scope of the moratorium would have had to expand beyond new concessions (15.0% of emissions from deforestation and peat degradation) to also include existing concessions (21.1% of emissions) and address deforestation outside of concessions and protected areas (58.7% of emissions). Place-based policies, such as moratoria, may be best thought of as bridge strategies that can be implemented rapidly while the institutions necessary to enable carbon price-based instruments are developed. PMID:25605880

  4. Nuclear energy. Choice for GHG emission reduction and sustainable energy development in China

    International Nuclear Information System (INIS)

    Zhang Rui; Zou Lin; Wang Yongping

    2007-01-01

    In this paper, the sustainability of China's energy development and the major challenges in four energy priorities are discussed by establishing and applying of Indicators of Sustainable Energy Development (ISED) with consideration of nuclear power as one viable option. On this basis, China's Energy Strategy to 2020 is discussed in detail. On the other hand, the crucial role that nuclear energy will play in the fields of emission reduction and climate change is discussed by analyzing illustrative models under different energy development scenarios. An assessment on what could look like in a fast developing country like China when an equivalent fund was invested in five different energy options of hydro-power, coal-fired power, nuclear power, wind power and gas-fired power would be presented with a discussion about possible future international climate protection regimes and the methodologies to evaluate the potential roles of those energy options, especially, the nuclear energy. (author)

  5. How can China reach its CO2 intensity reduction targets by 2020? A regional allocation based on equity and development

    International Nuclear Information System (INIS)

    Yi Wenjing; Zou Lele; Guo Jie; Wang Kai; Wei Yiming

    2011-01-01

    In late 2009, the Chinese government committed to cut its carbon dioxide emissions per unit of gross domestic product (GDP) by 40% to 45% of 2005 levels by 2020. This has raised the issue of how to allocate the CO 2 reduction target regionally to meet the national reduction target. To meet this objective, the following aspects may be taken into consideration: equity principles, 'common but differentiated responsibilities'; intensity reduction target fulfillment; and economic difference and reduction potential among provinces. This paper selects per capita GDP, accumulated fossil fuel related CO 2 emissions and energy consumption per unit of industrial added value as indicators for emission reduction capacity, responsibility and potential, respectively. Based on these three indicators, a comprehensive index is developed and an intensity allocation model constructed. As decision makers may have different preferences when allocating the reduction burden, we allocate different weights to the indicators, analyzing the results using cluster analysis. The following aspects may also be considered together with the national regional development strategy to determine how to share the burden: the reduction potential of various regions; implementation potential of the plans; and promotion of a highly efficient low carbon economic development model. - Research highlights: → We compiled a comprehensive index using per capita GDP, accumulated fossil fuel related CO 2 emissions and energy consumption per unit of industrial added value as indicators for emission reduction capacity, responsibility and potential, respectively. → National CO 2 intensity reduction target is allocated according to different index values of provinces. → Equity principles were taken into account when allocating the target.

  6. Cost-effective policy instruments for greenhouse gas emission reduction and fossil fuel substitution through bioenergy production in Austria

    International Nuclear Information System (INIS)

    Schmidt, Johannes; Leduc, Sylvain; Dotzauer, Erik; Schmid, Erwin

    2011-01-01

    Climate change mitigation and security of energy supply are important targets of Austrian energy policy. Bioenergy production based on resources from agriculture and forestry is an important option for attaining these targets. To increase the share of bioenergy in the energy supply, supporting policy instruments are necessary. The cost-effectiveness of these instruments in attaining policy targets depends on the availability of bioenergy technologies. Advanced technologies such as second-generation biofuels, biomass gasification for power production, and bioenergy with carbon capture and storage (BECCS) will likely change the performance of policy instruments. This article assesses the cost-effectiveness of energy policy instruments, considering new bioenergy technologies for the year 2030, with respect to greenhouse gas emission (GHG) reduction and fossil fuel substitution. Instruments that directly subsidize bioenergy are compared with instruments that aim at reducing GHG emissions. A spatially explicit modeling approach is used to account for biomass supply and energy distribution costs in Austria. Results indicate that a carbon tax performs cost-effectively with respect to both policy targets if BECCS is not available. However, the availability of BECCS creates a trade-off between GHG emission reduction and fossil fuel substitution. Biofuel blending obligations are costly in terms of attaining the policy targets. - Highlights: → Costs of energy policies and effects on reduction of CO 2 emissions and fossil fuel consumption. → Particular focus on new bioenergy production technologies such as second generation biofuels. → Spatially explicit techno-economic optimization model. → CO 2 tax: high costs for reducing fossil fuel consumption if carbon capture and storage is available. → Biofuel policy: no significant reductions in CO 2 emissions or fossil fuel consumption.

  7. Long-term greenhouse gas emission and petroleum reduction goals: Evolutionary pathways for the light-duty vehicle sector

    International Nuclear Information System (INIS)

    Kromer, Matthew A.; Bandivadekar, Anup; Evans, Christopher

    2010-01-01

    To meet long-term environmental and energy security goals, the United States must reduce petroleum use in the light-duty vehicle fleet by 70% and greenhouse gas emissions by a factor of ten compared to business-as-usual growth projections for the year 2050. A wedge-based approach was used to quantify the scope of the problem in real terms, and to develop options for meeting mid-century targets. Four mitigation mechanisms were considered: (1) improvements in near-term vehicle technologies; (2) emphasis on low-carbon biofuels; (3) de-carbonization of the electric grid; and (4) demand-side travel-reduction initiatives. Projections from previous studies were used to characterize the potential of individual mitigation mechanisms, which were then integrated into a light-duty vehicle fleet model; particular emphasis was given to systemic constraints on scale and rates of change. Based on these projections, two different greenhouse gas (GHG) mitigation implementation plans were considered ('evolutionary' and 'aggressive'). Fleet model projections indicate that both the evolutionary and aggressive approaches can effectively end US dependence on foreign oil, but achieving an 80% GHG reduction requires changes that extend significantly beyond even the aggressive case, which was projected to achieve a 65% reduction.

  8. The impact of China's carbon allowance allocation rules on the product prices and emission reduction behaviors of ETS-covered enterprises

    International Nuclear Information System (INIS)

    Zhang, Yue-Jun; Wang, Ao-Dong; Tan, Weiping

    2015-01-01

    It is an important task for China to allocate carbon emission allowance to realize its carbon reduction target and establish carbon trading market. China has designed several allocation rules within seven pilot regions. What influence those rules may cause is closely related with the enthusiasm of emission trading scheme (ETS) covered enterprises' participation in carbon market, and more importantly, with the mechanism design and sustainable development of carbon market. For this purpose, the multi-stage profit model is developed to analyze the ETS-covered enterprises' product prices and emission reduction behaviors under different allocation rules. The results show that, first, under the rules of grandfathering, self-declaration and auctioning, when deciding the optimal product price and optimal carbon emission reduction, those enterprises may focus on maximizing current stage profit; however, under the rule of benchmarking, those enterprises may care more about the impact of current decisions on the profit in next stage. Second, the optimal product price policy is positively correlated with the price of the same kind products, consumers' low-carbon awareness and government subsidy. Finally, along with the increase of carbon price, consumers' low-carbon awareness and government subsidy and the decrease of carbon emission cap, those enterprises tend to reduce carbon emissions. - Highlights: • Analyze the impact of carbon allowance allocation rules on ETS-covered enterprises. • For grandfather, self-declaration and auction, they may maximize current profits. • For benchmark, they care the effect of current decisions on the coming profits. • The optimal product price positively relates to low-carbon awareness and subsidy. • Carbon price, low-carbon awareness and subsidy rise leads their emission reduction.

  9. Theoretical study of amplified spontaneous emission intensity and bandwidth reduction in polymer

    International Nuclear Information System (INIS)

    Hariri, A.; Sarikhani, S.

    2015-01-01

    Amplified spontaneous emission (ASE), including intensity and bandwidth, in a typical example of BuEH-PPV is calculated. For this purpose, the intensity rate equation is used to explain the reported experimental measurements of a BuEH-PPV sample pumped at different pump intensities from I p = 0.61 MW/cm 2 to 5.2 MW/cm 2 . Both homogeneously and inhomogeneously broadened transition lines along with a model based on the geometrically dependent gain coefficient (GDGC) are examined and it is confirmed that for the reported measurements the homogeneously broadened line is responsible for the light–matter interaction. The calculation explains the frequency spectrum of the ASE output intensity extracted from the sample at different pump intensities, unsaturated and saturated gain coefficients, and ASE bandwidth reduction along the propagation direction. Both analytical and numerical calculations for verifying the GDGC model are presented in this paper. Although the introduced model has shown its potential for explaining the ASE behavior in a specific sample it can be universally used for the ASE study in different active media. (paper)

  10. Effect of selective catalytic reduction (SCR) on fine particle emission from two coal-fired power plants in China

    Science.gov (United States)

    Li, Zhen; Jiang, Jingkun; Ma, Zizhen; Wang, Shuxiao; Duan, Lei

    2015-11-01

    Nitrogen oxides (NOx) emission abatement of coal-fired power plants (CFPPs) requires large-scaled installation of selective catalytic reduction (SCR), which would reduce secondary fine particulate matter (PM2.5) (by reducing nitrate aerosol) in the atmosphere. However, our field measurement of two CFPPs equipped with SCR indicates a significant increase of SO42- and NH4+ emission in primary PM2.5, due to catalytic enhancement of SO2 oxidation to SO3 and introducing of NH3 as reducing agent. The subsequent formation of (NH4)2SO4 or NH4HSO4 aerosol is commonly concentrated in sub-micrometer particulate matter (PM1) with a bimodal pattern. The measurement at the inlet of stack also showed doubled primary PM2.5 emission by SCR operation. This effect should therefore be considered when updating emission inventory of CFPPs. By rough estimation, the enhanced primary PM2.5 emission from CFPPs by SCR operation would offset 12% of the ambient PM2.5 concentration reduction in cities as the benefit of national NOx emission abatement, which should draw attention of policy-makers for air pollution control.

  11. CO2 emissions and mitigation potential in China's ammonia industry

    International Nuclear Information System (INIS)

    Zhou Wenji; Zhu Bing; Li Qiang; Ma Tieju; Hu Shanying; Griffy-Brown, Charla

    2010-01-01

    Significant pressure from increasing CO 2 emissions and energy consumption in China's industrialization process has highlighted a need to understand and mitigate the sources of these emissions. Ammonia production, as one of the most important fundamental industries in China, represents those heavy industries that contribute largely to this sharp increasing trend. In the country with the largest population in the world, ammonia output has undergone fast growth spurred by increasing demand for fertilizer of food production since 1950s. However, various types of technologies implemented in the industry make ammonia plants in China operate with huge differences in both energy consumption and CO 2 emissions. With consideration of these unique features, this paper attempts to estimate the amount of CO 2 emission from China's ammonia production, and analyze the potential for carbon mitigation in the industry. Based on the estimation, related policy implications and measures required to realize the potential for mitigation are also discussed.

  12. Black carbon emission reduction strategies in healthcare industry for effective global climate change management.

    Science.gov (United States)

    Raila, Emilia Mmbando; Anderson, David O

    2017-04-01

    Climate change remains one of the biggest threats to life on earth to date with black carbon (BC) emissions or smoke being the strongest cause after carbon dioxide (CO 2 ). Surprisingly, scientific evidence about black carbon emissions reduction in healthcare settings is sparse. This paper presents new research findings on the reduction of black carbon emissions from an observational study conducted at the UN Peacekeeping Operations (MINUSTAH) in Haiti in 2014. Researchers observed 20 incineration cycles, 30 minutes for each cycle of plastic and cardboard sharps healthcare waste (HCW) containers ranged from 3 to 14.6 kg. The primary aim was to determine if black carbon emissions from healthcare waste incineration can be lowered by mainstreaming the use of cardboard sharps healthcare waste containers instead of plastic sharps healthcare waste containers. Similarly, the study looks into whether burning temperature was associated with the smoke levels for each case or not. Independent samples t-tests demonstrated significantly lower black carbon emissions during the incineration of cardboard sharps containers (6.81 ± 4.79% smoke) than in plastic containers (17.77 ± 8.38% smoke); a statistically significant increase of 10.96% smoke (95% Confidence Interval ( CI) [4.4 to 17.5% smoke], p = 0.003). Correspondingly, lower bottom burner temperatures occurred during the incineration of cardboard sharps containers than in plastic (95% Cl [16 to 126°C], p = 0.014). Finally, we expect the application of the new quantitative evidence to form the basis for policy formulation, mainstream the use of cardboard sharps containers and opt for non-incineration disposal technologies as urgent steps for going green in healthcare waste management.

  13. Emission reduction in diesel hybrid commercial vehicles; Emissionsreduzierung bei NFZ mit Dieselhybridantrieb

    Energy Technology Data Exchange (ETDEWEB)

    Kuberczyk, Raffael; Koehler, Jochen; Blattner, Stefan [ZF Friedrichshafen AG, Friedrichshafen (Germany)

    2013-03-01

    As far as the commercial vehicle driveline is concerned, today's formidable challenges are combined with an equally compelling need for action - all geared to the aim of meeting stringent emissions standards which reduce fuel consumption and emissions. At the same time the costs for sophisticated new exhaust emissions systems should be reduced. In the following, engineers from ZF Friedrichshafen AG illustrate the advantages offered by diesel hybrid trucks - and why a comprehensive analysis of all saving potentials is required to meet the ambitious targets. (orig.)

  14. Potentials for energy saving and CO2 reduction in Baden-Wuerttemberg. Status report

    International Nuclear Information System (INIS)

    Weimer, W.; Luenstroth, U.

    1993-01-01

    In order to protect the climate the Administration of the state of Baden-Wuerttemberg aims at cutting energy-related CO 2 -emissions by 30% by the year 2005. This study analyses the potentials of energy consumption and CO 2 -reduction in the state of Baden-Wuerttemberg in the framework of an evaluation of literature. As special emphasis is put on technical steps such as an increase in efficiency with respect to the generation and consumption of energy as well as on the substitution of fossil energy sources by regenerative techniques of energy generation. In order to obtain considerable potentials of energy-saving a moderate increase in energy prices as well as several actions to reduce impediments are required . However, an achievement of those goals by the year 2005 is only partly possible, because of the time required. The evaluation of literature serves as a preparation of the comprehensive project Klimavertraegliche Energieversorgung in Baden-Wuerttemberg (greenhouse-gas-reduced energy supply in Baden-Wuerttemberg) of the Center of Technology Assessment in Baden-Wuerttemberg. (orig.) [de

  15. Cost-Sharing Contracts for Energy Saving and Emissions Reduction of a Supply Chain under the Conditions of Government Subsidies and a Carbon Tax

    Directory of Open Access Journals (Sweden)

    Yi Yuyin

    2018-03-01

    Full Text Available To study the cooperation of upstream and downstream enterprises of a supply chain in energy saving and emissions reduction, we establish a Stackelberg game model. The retailer moves first to decide a cost-sharing contract, then the manufacturer determines the energy-saving level, carbon-emission level, and wholesale price successively. In the end, the retailer determines the retail price. As a regulation, the government provides subsidies for energy-saving products, while imposing a carbon tax on the carbon emitted. The results show that (1 both the energy-saving cost-sharing (ECS and the carbon emissions reduction cost-sharing (CCS contracts are not the dominant strategy of the two parties by which they can facilitate energy savings and emissions reductions; (2 compared with single cost-sharing contracts, the bivariate cost-sharing (BCS contract for energy saving and emissions reduction is superior, although it still cannot realise prefect coordination of the supply chain; (3 government subsidy and carbon tax policies can promote the cooperation of both the upstream and downstream enterprises of the supply chain—a subsidy policy can always drive energy saving and emissions reductions, while a carbon tax policy does not always exert positive effects, as it depends on the initial level of pollution and the level of carbon tax; and (4 the subsidy policy reduces the coordination efficiency of the supply chain, while the influences of carbon tax policy upon the coordination efficiency relies on the initial carbon-emission level.

  16. Hazardous air emissions potential from a wood-fired furnace

    International Nuclear Information System (INIS)

    Hubbard, A.J.

    1995-01-01

    During the first week of April, 1991 the Wisconsin Department of Natural Resources (WDNR) conducted a series of air emissions tests of a small industrial wood-fired boiler in northern Wisconsin. The boiler was firing a virgin hogged wood/wood waste fuel with a moisture content of about 35 percent. The pollutants measured were particulates, nitrogen oxides (NOx), carbon monoxide (GO), total hydrocarbons (THC), benzene, formaldehyde (CHOH), polycyclic organic matter (POM, e.g. Benzo (a) pyrene), aldehydes, and trace metals (As, Ba, Cu, Pb, Mn, Ni, K, Se, Na, and Zn). For two and a half days continuous emissions data were recorded by laboratory-certified continuous emissions monitors for CO, NOx, 0-2, THC, and COq2 while the EPA reference method stack tests were being conducted for the other pollutants. In addition, a WDNR test team measured CO, 0-2, and flue gas temperature with a Rosemount portable combustion analyzer for several hours over the course of those two and a half days. The principal purpose behind the study was to evaluate the hazardous air emissions potential of a small industrial furnace firing a virgin wood fuel. To that end, it was hoped that a surrogate pollutant could be identified which would represent the levels of hazardous air emissions (e.g., benzene) present in the wood-fired furnace flue gases. If a readily monitorable pollutant could be identified, then a regulatory strategy of measuring one representative pollutant could be put in place to continually assess the hazardous emissions potential of virgin wood combustion. (UK)

  17. Ontario emissions trading code : emission reduction credit creation, recording and transfer rules, rules for renewable energy projects and conservation projects, and rules for the operation of the Ontario Emissions Trading Registry

    International Nuclear Information System (INIS)

    2001-12-01

    Emissions trading has been an integral part of Ontario's air quality strategy since December 31, 2001. Ontario has adopted the 'cap, credit and trade' type of emissions trading system, a hybrid that takes the best features of pure 'cap-and-trade' and 'baseline-and-credit' type systems. It covers nitric oxide and sulphur dioxide. The Ontario Emissions Trading Code supplements Ontario Regulation 397/01 and sets out rules for renewable energy projects and conservation projects for which applications for emission allowances can be made. This Code describes the rules for the creation and transfer of emission reduction credits (ERCs). It also explains the rules for the operation of the registry that has been established to provide information to the public about the emissions trading program and records decisions about credit creation and credit and allowance retirement. 3 tabs

  18. NOx emission reduction from gas turbines

    International Nuclear Information System (INIS)

    Groppi, G.; Lietti, L.; Forzatti, P.

    2001-01-01

    NO x emissions from gas turbines are a serious environmental concern. Primary control technologies significantly reduce NO x formation, which however is still too high to match increasingly strict emission laws. Catalytic processes can provide lower NO x emissions both as primary and secondary control methods, but their economics should be carefully addressed [it

  19. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Science.gov (United States)

    Kittipongvises, Suthirat

    2015-12-01

    There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were

  20. Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

    Directory of Open Access Journals (Sweden)

    Kittipongvises Suthirat

    2015-12-01

    Full Text Available There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2 is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR, vertical roller mills (VRM, gravity pre-concentration and microwave heating technologies that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and