WorldWideScience

Sample records for emerging technologies tewi-iii

  1. 'TEWI' concept for estimation of the global warming from the refrigerating and air conditioning systems

    International Nuclear Information System (INIS)

    Ciconkov, Risto

    2002-01-01

    The most applied CFC refrigerants and their HFC alternatives. values of ODP (Ozone Depletion Potential) and GWP (Global Warming Potential) of the most used refrigerants. natural working fluids and their properties. Montreal Protocol and Kyoto Protocol, illogical relations between them concerning to the HFC fluids. Confusion and polemics on the international level about the appliance of HFCs which, by the Kyoto Protocol, are liable to reduction. Introduction of the TEWI concept as a method for estimating the overall influence of refrigerating and air conditioning systems on the greenhouse effect: the direct emission (refrigerant leakage in the atmosphere) and indirect emission as a result of the electrical energy consumption. A demonstration of the TEWI concept on the concrete example in several variants. A discussion about the appliance of the TEWI concept. Meaning of the energy efficiency of the refrigerating systems (indirect CO 2 emission). One of the main measures: prevention of refrigerant leakage (direct CO 2 emission). A need of permanent education and training courses of the people who work on refrigerating and air conditioning systems. A necessity for constitution of an expert body in the country, preparation of a strategy to lay obligations on the new changes of the Kyoto Protocol and news on the world market. Introduction of country regulations, certification of the companies and people involved in refrigeration and air conditioning. (Author)

  2. Surface passivation technology for III-V semiconductor nanoelectronics

    International Nuclear Information System (INIS)

    Hasegawa, Hideki; Akazawa, Masamichi

    2008-01-01

    The present status and key issues of surface passivation technology for III-V surfaces are discussed in view of applications to emerging novel III-V nanoelectronics. First, necessities of passivation and currently available surface passivation technologies for GaAs, InGaAs and AlGaAs are reviewed. Then, the principle of the Si interface control layer (ICL)-based passivation scheme by the authors' group is introduced and its basic characterization is presented. Ths Si ICL is a molecular beam epitaxy (MBE)-grown ultrathin Si layer inserted between III-V semiconductor and passivation dielectric. Finally, applications of the Si ICL method to passivation of GaAs nanowires and GaAs nanowire transistors and to realization of pinning-free high-k dielectric/GaAs MOS gate stacks are presented

  3. Global warming impacts of CFC alternative technologies: Combining fluorocarbon and CO2 effects

    International Nuclear Information System (INIS)

    Fairchild, P.D.; Fischer, S.K.; Hughes, P.J.

    1992-01-01

    Chlorofluorocarbons (CFCs) are on their way out, due to their role in stratospheric ozone depletion and the related international Montreal Protocol agreement and various national phaseout timetables. As the research, engineering development, and manufacturing investment decisions have ensued to prepare for this transition away from CFCs, the climate change issue has emerged and there has recently been increased attention on the direct global warming potential (GWP) of the fluorocarbon alternatives as greenhouse gases. However, there has been less focus on the indirect global warming effect arising from end-use energy changes and associated CO 2 emissions. A study was undertaken to address these combined global warming effects. A concept of Total Equivalent Warming Impact (TEWI) was developed for combining the direct and indirect effects and was used for evaluating CFC-replacement options available in the required CFC transition time frame. Analyses of industry technology surveys indicate that CFC-user industries have made substantial progress toward near-equal energy efficiency with many HCFC/HFC alternatives. The findings also bring into question the relative importance of the direct effect in many applications and stress energy efficiency when searching for suitable CFC alternatives. For chillers, household refrigerators, and unitary air-conditioning or heat pump equipment, changes in efficiency of only 2--5% would have a greater effect on future TEWI than completely eliminating the direct effect

  4. Entrepreneurship, Emerging Technologies, Emerging Markets

    NARCIS (Netherlands)

    Thukral, Inderpreet S.; Von Ehr, James; Walsh, Steven Thomas; Groen, Arend J.; van der Sijde, Peter; Adham, Khairul Akmaliah

    2008-01-01

    Academics and practitioners alike have long understood the benefits, if not the risks, of both emerging markets and emerging technologies.Yet it is only recently that foresighted firms have embraced emerging technologies and emerging markets through entrepreneurial activity. Emerging technologies

  5. Theme: Emerging Technologies.

    Science.gov (United States)

    Malpiedi, Barbara J.; And Others

    1989-01-01

    Consists of six articles discussing the effect of emerging technologies on agriculture. Specific topics include (1) agriscience programs, (2) the National Conference on Agriscience and Emerging Occupations and Technologies, (3) biotechnology, (4) program improvement through technology, (5) the Agriscience Teacher of the Year program, and (6)…

  6. Emerging technology and ethics

    CERN Document Server

    Wakunuma, Kutoma

    2011-01-01

    This e-book on Emerging Technologies and Ethics includes a collection of essays which explore the future and ethics of emerging information and communication technologies. Articles in the collection include an overview of the legal implications which may be relevant to the ethical aspects of emerging technologies and also ethical issues arising from the mass-take up of mobile technologies.

  7. Emerging Technological Risk Underpinning the Risk of Technology Innovation

    CERN Document Server

    Anderson, Stuart

    2012-01-01

    Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

  8. The Virtual Learning Commons: An Emerging Technology for Learning About Emerging Technologies

    Science.gov (United States)

    Pennington, D. D.; Del Rio, N.; Fierro, C.; Gandara, A.; Garcia, A.; Garza, J.; Giandoni, M.; Ochoa, O.; Padilla, E.; Salamah, S.

    2013-12-01

    The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of semantic, visualization, and social media tools that support knowledge sharing and innovation across research disciplines. The explosion of new scientific tools and techniques challenges the ability of researchers to be aware of emerging technologies that might benefit them. Even when aware, it can be difficult to understand enough about emerging technologies to become potential adopters or re-users. Often, emerging technologies have little documentation, especially about the context of their use. The VLC tackles this challenge by providing mechanisms for individuals and groups of researchers to collectively organize Web resources through social bookmarking, and engage each other around those collections in order to a) learn about potentially relevant technologies that are emerging; and b) get feedback from other researchers on innovative ideas and designs. Concurrently, developers of emerging technologies can learn about potential users and the issues they encounter, and they can analyze the impact of their tools on other projects. The VLC aims to support the 'fuzzy front end' of innovation, where novel ideas emerge and there is the greatest potential for impact on research design. It is during the fuzzy front end that conceptual collisions across disciplines and exposure to diverse perspectives provide opportunity for creative thinking that can lead to inventive outcomes. This presentation will discuss the innovation theories that have informed design of the VLC, and hypotheses about the flow of information in virtual settings that can enable the process of innovation. The presentation will include a brief demonstration of key capabilities within the VLC that enable learning about emerging technologies, including the technologies that are presented in this session.

  9. Emergent technologies: 25 years

    Science.gov (United States)

    Rising, Hawley K.

    2013-03-01

    This paper will talk about the technologies that have been emerging over the 25 years since the Human Vision and Electronic Imaging conference began that the conference has been a part of, and that have been a part of the conference, and will look at those technologies that are emerging today, such as social networks, haptic technologies, and still emerging imaging technologies, and what we might look at for the future.Twenty-five years is a long time, and it is not without difficulty that we remember what was emerging in the late 1980s. Yet to be developed: The first commercial digital still camera was not yet on the market, although there were hand held electronic cameras. Personal computers were not displaying standardized images, and image quality was not something that could be talked about in a standardized fashion, if only because image compression algorithms were not standardized yet for several years hence. Even further away were any standards for movie compression standards, there was no personal computer even on the horizon which could display them. What became an emergent technology and filled many sessions later, image comparison and search, was not possible, nor the current emerging technology of social networks- the world wide web was still several years away. Printer technology was still devising dithers and image size manipulations which would consume many years, as would scanning technology, and image quality for both was a major issue for dithers and Fourier noise.From these humble beginnings to the current moves that are changing computing and the meaning of both electronic devices and human interaction with them, we will see a course through the changing technology that holds some features constant for many years, while others come and go.

  10. Anticipatory Ethics for Emerging Technologies

    NARCIS (Netherlands)

    Brey, Philip A.E.

    2012-01-01

    In this essay, a new approach for the ethical study of emerging technology ethics will be presented, called anticipatory technology ethics (ATE). The ethics of emerging technology is the study of ethical issues at the R&D and introduction stage of technology development through anticipation of

  11. Emerging wind energy technologies

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Grivel, Jean-Claude; Faber, Michael Havbro

    2014-01-01

    This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive.......This chapter will discuss emerging technologies that are expected to continue the development of the wind sector to embrace new markets and to become even more competitive....

  12. Emerging technology: A key enabler for modernizing pharmaceutical manufacturing and advancing product quality.

    Science.gov (United States)

    O'Connor, Thomas F; Yu, Lawrence X; Lee, Sau L

    2016-07-25

    Issues in product quality have produced recalls and caused drug shortages in United States (U.S.) in the past few years. These quality issues were often due to outdated manufacturing technologies and equipment as well as lack of an effective quality management system. To ensure consistent supply of safe, effective and high-quality drug products available to the patients, the U.S. Food and Drug Administration (FDA) supports modernizing pharmaceutical manufacturing for improvements in product quality. Specifically, five new initiatives are proposed here to achieve this goal. They include: (i) advancing regulatory science for pharmaceutical manufacturing; (ii) establishing a public-private institute for pharmaceutical manufacturing innovation; (iii) creating incentives for investment in the technological upgrade of manufacturing processes and facilities; (iv) leveraging external expertise for regulatory quality assessment of emerging technologies; and (v) promoting the international harmonization of approaches for expediting the global adoption of emerging technologies. Published by Elsevier B.V.

  13. Emerging energy-efficient industrial technologies

    Energy Technology Data Exchange (ETDEWEB)

    Martin, N.; Worrell, E.; Ruth, M.; Price, L.; Elliott, R.N.; Shipley, A.M.; Thorne, J.

    2000-10-01

    U.S. industry consumes approximately 37 percent of the nation's energy to produce 24 percent of the nation's GDP. Increasingly, industry is confronted with the challenge of moving toward a cleaner, more sustainable path of production and consumption, while increasing global competitiveness. Technology will be essential for meeting these challenges. At some point, businesses are faced with investment in new capital stock. At this decision point, new and emerging technologies compete for capital investment alongside more established or mature technologies. Understanding the dynamics of the decision-making process is important to perceive what drives technology change and the overall effect on industrial energy use. The assessment of emerging energy-efficient industrial technologies can be useful for: (1) identifying R&D projects; (2) identifying potential technologies for market transformation activities; (3) providing common information on technologies to a broad audience of policy-makers; and (4) offering new insights into technology development and energy efficiency potentials. With the support of PG&E Co., NYSERDA, DOE, EPA, NEEA, and the Iowa Energy Center, staff from LBNL and ACEEE produced this assessment of emerging energy-efficient industrial technologies. The goal was to collect information on a broad array of potentially significant emerging energy-efficient industrial technologies and carefully characterize a sub-group of approximately 50 key technologies. Our use of the term ''emerging'' denotes technologies that are both pre-commercial but near commercialization, and technologies that have already entered the market but have less than 5 percent of current market share. We also have chosen technologies that are energy-efficient (i.e., use less energy than existing technologies and practices to produce the same product), and may have additional ''non-energy benefits.'' These benefits are as important (if

  14. Emerging environmental technologies and environmental technology policy

    Science.gov (United States)

    Clarke, Leon Edward

    This dissertation explores the role and design of environmental technology policy when environmental innovation is embodied in emerging environmental technologies such as photovoltaic cells or fuel cells. The dissertation consists of three individual studies, all of which use a simplified, general model industry between an emerging environmental technology and an entrenched, more-polluting technology. It clarifies the situations in which environmental technology policy can achieve high welfare and those in which it cannot; and it separates the possible situations an emerging environmental technology might face into four scenarios, each with its own technology policy recommendations. The second study attempts to clarify which of two factors is having a larger limiting effect on private investment in photovoltaics: the failure to internalize the environmental costs of fossil fuel electricity generation or a broad set of innovation market failures that apply to innovation irrespective of environmental concerns. The study indicates that innovation market failures are probably having a significantly larger impact than incomplete internalization. The third study explores the effectiveness of adoption subsidies at encouraging private-sector innovation. The conclusion is that adoption subsidies probably have only a limited effect on long-term, private-sector research. Two important general conclusions of the dissertation are (1) that optimal technology policy should begin with technology-push measures and end with demand-pull measures; and (2) that the technological response to internalization instruments, such as emissions taxes, may be highly nonlinear.

  15. Fusion of Nuclear and Emerging Technology

    International Nuclear Information System (INIS)

    Nahrul Khaer Alang Rashid

    2005-04-01

    The presentation discussed the following subjects: emerging technology; nuclear technology; fusion emerging and nuclear technology; progressive nature of knowledge; optically stimulated luminescence - application of luminescence technology to sediments; Biosystemics technology -convergence nanotechnology, ecological science, biotechnology, cognitive science and IT - prospective impact on materials science, the management of public system for bio-health, eco and food system integrity and disease mitigation

  16. Emerging and Disruptive Technologies.

    Science.gov (United States)

    Kricka, Larry J

    2016-08-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home testing formats), new types of specimens (e.g., cell free DNA), big biology/data (e.g., million genome projects), and new regulations (e.g., for laboratory developed tests). In addition, there are many emerging technologies (e.g., planar arrays, mass spectrometry) that might find even broader application in the future and therefore also disrupt current practice. One interesting source of disruptive technology may prove to be the Qualcomm Tricorder XPrize, currently in its final stages.

  17. Emerging technologies in stereotactic body radiotherapy.

    Science.gov (United States)

    Ma, Lijun; Wang, Lei; Tseng, Chia-Lin; Sahgal, Arjun

    2017-09-01

    Stereotactic body radiation therapy (SBRT) stems from the initial developments of intra-cranial stereotactic radiosurgery (SRS). Despite similarity in their names and clinical goals of delivering a sufficiently high tumoricidal dose, maximal sparing of the surrounding normal tissues and a short treatment course, SBRT technologies have transformed from the early days of body frame-based treatments with X-ray verification to primarily image-guided procedures with cone-beam CT or stereoscopic X-ray systems and non-rigid body immo-bilization. As a result of the incorporation of image-guidance systems and multi-leaf col-limators into mainstream linac systems, and treatment planning systems that have also evolved to allow for routine dose calculations to permit intensity modulated radiotherapy and volumetric modulated arc therapy (VMAT), SBRT has disseminated rapidly in the community to manage many disease sites that include oligometastases, spine lesions, lung, prostate, liver, renal cell, pelvic tumors, and head and neck tumors etc. In this article, we review the physical principles and paradigms that led to the widespread adoption of SBRT practice as well as technical caveats specific to individual SBRT technologies. From the perspective of treatment delivery, we categorically described (I) C-arm linac-based SBRT technologies; (II) robotically manipulated X-band CyberKnife® technology; and (III) emerging specialized systems for SBRT that include integrated MRI-linear accelerators and the imaged-guided Gamma Knife Perfexion Icon system with expanded multi-isocenter treatments of skull-based tumors, head-and-neck and cervical-spine lesions.

  18. 2017 Emerging Technology Domains Risk Survey

    Science.gov (United States)

    2017-10-01

    REV-03.18.2016.0 2017 Emerging Technology Domains Risk Survey Daniel Klinedinst Joel Land Kyle O’Meara October 2017 TECHNICAL REPORT CMU/SEI...Distribution Statement A: Approved for Public Release. Distribution is Unlimited. List of Tables Table 1: New and Emerging Technologies 2 Table 2: Security...Impact of New and Emerging Technologies 4 Table 3: Severity Classifications and Impact Scores 5 CMU/SEI-2017-TR-008 | SOFTWARE ENGINEERING

  19. The emerging story of emerging technologies in neuropsychiatry

    OpenAIRE

    Coffey, M. Justin; Coffey, C. Edward

    2016-01-01

    The growth of new technologies in health care is exponential, and the impact of such rapid technological innovation on health care delivery is substantial. This review describes two emerging technologies?mobile applications and wearable technologies?and uses a virtual case report to illustrate the impact of currently available technologies on the health care experience of a patient with neuropsychiatric illness.

  20. The emerging story of emerging technologies in neuropsychiatry.

    Science.gov (United States)

    Coffey, M Justin; Coffey, C Edward

    2016-06-01

    The growth of new technologies in health care is exponential, and the impact of such rapid technological innovation on health care delivery is substantial. This review describes two emerging technologies-mobile applications and wearable technologies-and uses a virtual case report to illustrate the impact of currently available technologies on the health care experience of a patient with neuropsychiatric illness.

  1. Emerging and Disruptive Technologies

    OpenAIRE

    Kricka, Larry J.

    2016-01-01

    Several emerging or disruptive technologies can be identified that might, at some point in the future, displace established laboratory medicine technologies and practices. These include increased automation in the form of robots, 3-D printing, technology convergence (e.g., plug-in glucose meters for smart phones), new point-of-care technologies (e.g., contact lenses with sensors, digital and wireless enabled pregnancy tests) and testing locations (e.g., Retail Health Clinics, new at-home test...

  2. Emerging memory technologies design, architecture, and applications

    CERN Document Server

    2014-01-01

    This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits. • Provides a comprehensive reference on designing modern circuits with emerging, non-volatile memory technologies, such as MRAM and PCRAM; • Explores new design opportunities offered by emerging memory technologies, from a holistic perspective; • Describes topics in technology, modeling, architecture and applications; • Enables circuit designers to ex...

  3. Investigation of Emerging Materials for Optoelectronic Devices Based on III-Nitrides

    KAUST Repository

    Mumthaz Muhammed, Mufasila

    2018-01-01

    performance due to dislocation defects, remains an obstacle to their further improvement. In this dissertation, I present a significant enhancement of III-nitride devices based on emerging materials. A promising substrate, (-201)-oriented β-Ga2O3 with unique

  4. Dosimetry challenges for implementing emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Yin Fangfang; Oldham, Mark; Cai Jing; Wu Qiuwen, E-mail: Fangfang.yin@duke.ed [Department of Radiation Oncology Duke University Medical Center, Durham, NC 27516 (United States)

    2010-11-01

    During the last 10 years, radiation therapy technologies have gone through major changes, mainly related introduction of sophisticated delivery and imaging techniques to improve the target localization accuracy and dose conformity. While implementation of these emerging technologies such as image-guided SRS/SBRT, IMRT/IMAT, IGRT, 4D motion management, and special delivery technologies showed substantial clinical gains for patient care, many other factors, such as training/quality, efficiency/efficacy, and cost/effectiveness etc. remain to be challenging. This talk will address technical challenges for dosimetry verification of implementing these emerging technologies in radiation therapy.

  5. Emerging Biological Technologies: Biofuels and Biochemicals

    DEFF Research Database (Denmark)

    Karakashev, Dimitar Borisov; Angelidaki, Irini

    2011-01-01

    Composting and anaerobic digestion are well established technologies, although the latter is a relative recent technology regarding solidwaste and full scale plants still are relatively few. However, alternative technologies based on biotechnology are emerging. These technologies are focused arou...

  6. Technology Foresight in Emerging Maritime & Marine Economies

    DEFF Research Database (Denmark)

    Spaniol, Matthew Jon; Rohrbeck, René

    . The technologies are organized to support innovation and the development of new business areas, and sustains discussion via an online portal. The upshot for technology developers is the organization of the technological landscape. The upshot for academics is the expanded horizon of emerging technologies...... for anticipatory projects, development efforts, and policy considerations. An early iteration of the Radar covers: • Renewable ocean energy • Seabed mining & offshore technology • Marine biotechnology & aquaculture • Specialized vessels & infrastructure • Servicing emerging maritime & offshore activities...

  7. Emerging educational technologies: Tensions and synergy

    Directory of Open Access Journals (Sweden)

    J. Michael Spector

    2014-01-01

    Full Text Available A review of high level sources with regard to new and emerging technologies was conducted. Three technologies, according to these sources, appear especially promising: (a massive open online courses (MOOCs, (b personalized learning, and (c game-based learning. This paper will review information from the US National Science Foundation, the US Department of Education, the New Media Consortium, and two European Networks of Excellence with regard to new and emerging technologies. A critique will then be provided using established principles pertaining to learning and instruction and a recommended curriculum for advanced learning technologies. The general result is that it appears that some educational technology advocates are overstating the likelihood of these three technologies having a significant and sustained impact in the near future, although there are promising aspects to each of these technologies in the long term.

  8. 78 FR 40098 - Emerging Technology and Research Advisory Committee;

    Science.gov (United States)

    2013-07-03

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Assistant Secretary for Export Administration on emerging technology and research activities, including...

  9. Investigation of Emerging Materials for Optoelectronic Devices Based on III-Nitrides

    KAUST Repository

    Muhammed, Mufasila Mumthaz

    2018-03-11

    III-nitride direct bandgap semiconductors have attracted significant research interest due to their outstanding potential for modern optoelectronic and electronic applications. However, the high cost of III-nitride devices, along with low performance due to dislocation defects, remains an obstacle to their further improvement. In this dissertation, I present a significant enhancement of III-nitride devices based on emerging materials. A promising substrate, (-201)-oriented β-Ga2O3 with unique properties that combine high transparency and conductivity, is used for the first time in the development of high-quality vertical III-nitride devices, which can be cost-effective for large-scale production. In addition, hybridizing GaN with emerging materials, mainly perovskite, is shown to extend the functionality of III-nitride applications. As a part of this investigation, high-performance and high-responsivity fast perovskite/GaN-based UV-visible broadband photodetectors were developed. State-of-the-art GaN epilayers grown on (-201)-oriented β-Ga2O3 using AlN and GaN buffer layers are discussed, and their high optical quality without using growth enhancement techniques is demonstrated. In particular, a low lattice mismatch (⁓4.7%) between GaN and the substrate results in a low density of dislocations ~4.8Å~107 cm−2. To demonstrates the effect of (-201)-oriented β-Ga2O3 substrate on the quality of III-nitride alloys, high-quality ternary alloy InxGa1−xN film is studied, followed by the growth of high quality InxGa1−xN/GaN single and multiple quantum wells (QWs). The optical characterization and carrier dynamics by photoluminescence (PL) and time-resolved PL measurements were subsequently performed. Lastly, to investigate the performance of a vertical emitting device based on InGaN/GaN multiple QWs grown on (-201)-oriented β-Ga2O3 substrate, high-efficiency vertical-injection emitting device is developed and extensively investigated. The conductive nature of

  10. Introduction to the field of emerging technology management

    NARCIS (Netherlands)

    Groen, A. J.; Walsh, S. T.

    Many see emerging technologies as a solution vector for the global challenges of the twenty-first century. Today's emerging technologies include: computational sciences; nanotechnology; micro-electro-mechanical systems (MEMS); bio-fuels; mobile technologies and a host of others. Yet an adequate

  11. Introduction to the field of emerging technology management

    NARCIS (Netherlands)

    Groen, Arend J.; Walsh, Steven Thomas

    2013-01-01

    Many see emerging technologies as a solution vector for the global challenges of the twenty-first century. Today's emerging technologies include: computational sciences; nanotechnology; micro-electro-mechanical systems (MEMS); bio-fuels; mobile technologies and a host of others. Yet an adequate

  12. AEA Technology, Harwell site emergency plan

    International Nuclear Information System (INIS)

    1993-01-01

    This plan, describes the site arrangements and facilities for dealing with an emergency at Harwell. These arrangements consist of amongst other things provision of suitably qualified, experienced and trained staff to take up posts, provision of suitable facilities and equipment, arrangements to alert and protect persons on and off the site, liaison and contact arrangements with external agencies and organisations and supply of information before and during any emergency. Other organisations have their own arrangements for dealing with an emergency at AEA Technology Harwell. The arrangements for dealing with any off-site consequences are drawn together in the ''Oxfordshire County Council Essential Services Emergency Plan (Off-Site) for AEA Technology, Harwell''. Prior information for members of the public who may be affected in the event of an emergency at Harwell is issued in the form of leaflets. (author)

  13. Emerging technologies in surgery

    International Nuclear Information System (INIS)

    Satava, R.M.; Gaspari, A.; Di Lorenzo, N.

    2007-01-01

    Tremendous acceleration and changes in scientific discovery and progress are presently occurring. These important emerging technologies that will affect the practicing surgeon within the next 10 to 20 years are illustrated in detail in this volume. Its purpose is not to review clinical experience of the common surgical practice of the past decade, but to outline and illustrate the future trends. International experts in this field demonstrate emerging procedures and significant advances. (orig.)

  14. Spatial Dynamics of Technological Evolution: Technological Relatedness as Driver for Radical Emerging Technologies

    DEFF Research Database (Denmark)

    Tanner, Anne Nygaard

    and applied knowledge in firms, universities, research institutes etc., and 2) the existence of risk-taking actors who are willing and capable of implementing and exploiting radical technologies. This paper focuses on the former. Where evolutionary economics have been occupied by accumulation of knowledge......Despite the consent of the fundamental role technological change plays for economic growth, it seems that little attention has been paid to how new technologies come into being. In particular, an understanding of the spatial and dynamic processes driving the emergence of radical technology...... is lacking. This paper seeks to fill out this research gap by bridging the school of evolutionary economics and the school of economic geography. Following Dosi (1988) two factors are in particular important for technological change in emerging technological paradigms: 1) accumulation of scientific...

  15. Emerging Technologies for Environmental Remediation: Integrating Data and Judgment.

    Science.gov (United States)

    Bates, Matthew E; Grieger, Khara D; Trump, Benjamin D; Keisler, Jeffrey M; Plourde, Kenton J; Linkov, Igor

    2016-01-05

    Emerging technologies present significant challenges to researchers, decision-makers, industry professionals, and other stakeholder groups due to the lack of quantitative risk, benefit, and cost data associated with their use. Multi-criteria decision analysis (MCDA) can support early decisions for emerging technologies when data is too sparse or uncertain for traditional risk assessment. It does this by integrating expert judgment with available quantitative and qualitative inputs across multiple criteria to provide relative technology scores. Here, an MCDA framework provides preliminary insights on the suitability of emerging technologies for environmental remediation by comparing nanotechnology and synthetic biology to conventional remediation methods. Subject matter experts provided judgments regarding the importance of criteria used in the evaluations and scored the technologies with respect to those criteria. The results indicate that synthetic biology may be preferred over nanotechnology and conventional methods for high expected benefits and low deployment costs but that conventional technology may be preferred over emerging technologies for reduced risks and development costs. In the absence of field data regarding the risks, benefits, and costs of emerging technologies, structuring evidence-based expert judgment through a weighted hierarchy of topical questions may be helpful to inform preliminary risk governance and guide emerging technology development and policy.

  16. Offsite emergency radiological monitoring system and technology

    International Nuclear Information System (INIS)

    Mao Yongze

    1994-01-01

    The study and advance of the offsite radiological monitoring system and technology which is an important branch in the field of nuclear monitoring technology are described. The author suggests that the predicting and measuring system should be involved in the monitoring system. The measuring system can further be divided into four sub-systems, namely plume exposure pathway, emergency worker, ingestion exposure pathway and post accident recovery measuring sub-systems. The main facilities for the monitoring system are concluded as one station, one helicopter, one laboratory and two vehicles. The instrumentation for complement of the facilities and their good performance characteristics, up-to-date technology are also introduced in brief. The offsite emergency radiation monitoring system and technology are compared in detail with those recommended by FEMA U.S.A.. Finally the paper discusses some trends in development of emergency radiation monitoring system and technology in the developed countries

  17. Implementation of Emerging Technologies

    DEFF Research Database (Denmark)

    Barba, F. J.; Orlien, Vibeke; Mota, Maria J.

    2016-01-01

    safety are presented and discussed with an ultimate goal to explore strategies for their implementation in the food industry. Novel thermal and nonthermal technologies have shown clear environmental benefits by improving the overall energy efficiency of the process and reducing the use of nonrenewable......Novel processing technologies have been gaining interest among food researchers due to their lower impact on nutritional and sensory properties of the products compared to the conventional thermal techniques. In this chapter some of the most well-studied (eg, high-pressure processing, pulsed...... electric fields, ohmic heating, microwave, and ultrasound) emerging technologies are briefly reviewed. Most of these technologies have found niche applications in the food industry, replacing or complementing conventional preservation technologies. Thereby, data on commercialization, energy, and microbial...

  18. Emerging Technologies as Cognitive Tools for Authentic Learning

    Science.gov (United States)

    Herrington, Jan; Parker, Jenni

    2013-01-01

    Employing emerging technologies in learning is becoming increasingly important as a means to support the development of digital media literacy. Using a theoretical framework of authentic learning and technology as cognitive tools, this paper examined student responses to the infusion of emerging technologies in a large first year teacher education…

  19. Emerging Technologies for Gut Microbiome Research

    Science.gov (United States)

    Arnold, Jason W.; Roach, Jeffrey; Azcarate-Peril, M. Andrea

    2016-01-01

    Understanding the importance of the gut microbiome on modulation of host health has become a subject of great interest for researchers across disciplines. As an intrinsically multidisciplinary field, microbiome research has been able to reap the benefits of technological advancements in systems and synthetic biology, biomaterials engineering, and traditional microbiology. Gut microbiome research has been revolutionized by high-throughput sequencing technology, permitting compositional and functional analyses that were previously an unrealistic undertaking. Emerging technologies including engineered organoids derived from human stem cells, high-throughput culturing, and microfluidics assays allowing for the introduction of novel approaches will improve the efficiency and quality of microbiome research. Here, we will discuss emerging technologies and their potential impact on gut microbiome studies. PMID:27426971

  20. Emerging electrochemical energy conversion and storage technologies

    Science.gov (United States)

    Badwal, Sukhvinder P. S.; Giddey, Sarbjit S.; Munnings, Christopher; Bhatt, Anand I.; Hollenkamp, Anthony F.

    2014-01-01

    Electrochemical cells and systems play a key role in a wide range of industry sectors. These devices are critical enabling technologies for renewable energy; energy management, conservation, and storage; pollution control/monitoring; and greenhouse gas reduction. A large number of electrochemical energy technologies have been developed in the past. These systems continue to be optimized in terms of cost, life time, and performance, leading to their continued expansion into existing and emerging market sectors. The more established technologies such as deep-cycle batteries and sensors are being joined by emerging technologies such as fuel cells, large format lithium-ion batteries, electrochemical reactors; ion transport membranes and supercapacitors. This growing demand (multi billion dollars) for electrochemical energy systems along with the increasing maturity of a number of technologies is having a significant effect on the global research and development effort which is increasing in both in size and depth. A number of new technologies, which will have substantial impact on the environment and the way we produce and utilize energy, are under development. This paper presents an overview of several emerging electrochemical energy technologies along with a discussion some of the key technical challenges. PMID:25309898

  1. Strategic intelligence on emerging technologies: Scientometric overlay mapping

    NARCIS (Netherlands)

    Rotolo, D.; Rafols, I.; Hopkins, M.M.; Leydesdorff, L.

    This paper examines the use of scientometric overlay mapping as a tool of “strategic intelligence” to aid the governing of emerging technologies. We develop an integrative synthesis of different overlay mapping techniques and associated perspectives on technological emergence across geographical,

  2. Understanding Public Responses to Emerging Technologies

    NARCIS (Netherlands)

    Macnaghten, Philip; Davies, S.R.; Kearnes, Matthew

    2015-01-01

    Previous studies aimed at understanding public responses to emerging technologies have given limited attention to the social and cultural processes through which public concerns emerge. When probed, these have tended to be explained either in cognitive social psychological terms, typically in the

  3. Nanotechnology risk perceptions and communication: emerging technologies, emerging challenges.

    Science.gov (United States)

    Pidgeon, Nick; Harthorn, Barbara; Satterfield, Terre

    2011-11-01

    Nanotechnology involves the fabrication, manipulation, and control of materials at the atomic level and may also bring novel uncertainties and risks. Potential parallels with other controversial technologies mean there is a need to develop a comprehensive understanding of processes of public perception of nanotechnology uncertainties, risks, and benefits, alongside related communication issues. Study of perceptions, at so early a stage in the development trajectory of a technology, is probably unique in the risk perception and communication field. As such it also brings new methodological and conceptual challenges. These include: dealing with the inherent diversity of the nanotechnology field itself; the unfamiliar and intangible nature of the concept, with few analogies to anchor mental models or risk perceptions; and the ethical and value questions underlying many nanotechnology debates. Utilizing the lens of social amplification of risk, and drawing upon the various contributions to this special issue of Risk Analysis on Nanotechnology Risk Perceptions and Communication, nanotechnology may at present be an attenuated hazard. The generic idea of "upstream public engagement" for emerging technologies such as nanotechnology is also discussed, alongside its importance for future work with emerging technologies in the risk communication field. © 2011 Society for Risk Analysis.

  4. Technology Foresight on Emerging Technologies: Implications for a National Innovation Initiative in Brazil

    Directory of Open Access Journals (Sweden)

    Maria Fatima Ludovico de Almeida

    2015-07-01

    Full Text Available Prospective studies about emerging technologies and their implications for public policy formulation indicate critical choices ranging from global to national level, even to the individual firm or institution. Emerging technologies have been shaping the future of some industries and transforming many others. In many cases, these technologies will determine the restructuring of industries as never before. Specially designed for enabling better planning and future decisions, technology foresight (TF methods are used to foresee diffusion of innovations, mapping out commercially viable roadmaps for technological development. This paper is concerned with a methodological instrument adopted in Brazil as support for building the Agenda for a National Innovation Initiative (NII, which was articulated by government, universities, R&D institutions, and private firms. It presents and discusses an integrated methodological approach for a TF study, specially designed for the purpose of this Brazilian innovation policy instrument, concerning three emerging technologies – nanotechnology, biotechnology, and information and communication technologies (ICT.

  5. Information technology for emergency management

    International Nuclear Information System (INIS)

    Andersen, V.

    1990-01-01

    Improved performance in emergency management by the use of modern information technology has been investigated. Limited parts of a preparedness system have been chosen based on analysis of drills with respect to emergency situations and real accidents. Specific functions relevant for the situation have been selected and implemented in prototype test systems. Finally, the usefulness of the prototype systems has been evaluated by experiments following specific scenarios. (author) 24 refs

  6. Emerging technologies, innovative teachers and moral cohesion

    CSIR Research Space (South Africa)

    Batchelor, J

    2012-05-01

    Full Text Available efficacy when they engage with emerging technologies. The concept of moral cohesion is further expanded and forms the main focus of this article. Keywords: emerging technologies, innovative teachers, moral cohesion, pedagogies, ethics, teacher.... African Renaissance and teacher disposition is identified as the strongest drivers. Teacher training forms the link between the strong drivers and the outcomes manifest as Stewardship and ethical considerations. 3.2 Professional Burden The theme...

  7. An Assessment of Emerging Wireless Broadband Technologies

    National Research Council Canada - National Science Library

    Fountanas, Leonidas

    2001-01-01

    ... technologies in providing broadband services today, emerging wireless broadband technologies are expected to significantly increase their market share over the next years, Deploying a wireless network...

  8. Localized knowledge spillover and the emergence of new technology

    DEFF Research Database (Denmark)

    Tanner, Anne Nygaard

    2010-01-01

    For the past 20 years scholars have found support for the thesis that knowledge spills over in geographical and technological proximity to the source of knowledge creation. It is the objective of this paper to examine whether this understanding of LKS can contribute to a greater understanding...... of emerging technologies and their geographical distribution. The paper examines this by studying the emergence of a generic technology with a very complex knowledge base, namely the fuel cell (FC) technology. The analysis is carried out on an OECD dataset on regionalized PCT patent applications (OECD REGPAT......-related technology fields. These findings corroborate the usefulness of the theory on LKS in explaining elements of the emergence of new technologies. Moreover, the analysis sheds new light on regional development and diversification along new technological trajectory....

  9. Key Emerging Technologies for Elementary and Secondary Education

    Science.gov (United States)

    Johnson, Laurence F.; Levine, Alan; Smith, Rachel S.; Haywood, Keene

    2010-01-01

    The Horizon Report series is the most visible outcome of the New Media Consortium's Horizon Project, an ongoing research effort that identifies and describes emerging technologies likely to have a large impact on teaching, learning, research, or creative expression within education around the globe. The report examines emerging technologies for…

  10. Networks dynamics in the case of emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Rotolo, D

    2016-07-01

    This research in progress aims at increasing our understanding of how collaborative networks form, evolve and are configured in the case of emerging technologies. The architecture of the relationships among the variety of organisational actors involved in the emergence process exerts a significant influence in shaping technological change in certain directions rather than others, especially in the early stage of emergence. As a result, socially optimal or desirable technological trajectories may be ‘opportunistically’ rejected. Our empirical analysis is based on a case-study of an emerging medical technology, namely ‘microneedles’. On the basis of co-authorship data reported in 1,943 publications on the topic from 1990 to 2014, longitudinal collaboration (co-authorship) networks were built at two levels: affiliation and author. We examined the dynamics of co-authorship networks by building on recent methodological advancements in network analysis, i.e. Exponential Random Graph Models (ERGMs). These models enable us to make statistical inferences about on the extent to which a network configuration occurs more than could be expected by chance and to identify which social mechanisms may be shaping the network in certain configurations. The findings of the statistical analyses (currently in progress) combined with the qualitative understanding of the case will increase our understanding of which mechanisms are more likely to drive the network dynamics in the case of emerging technologies. These include evidence of the extent to which the likelihood of forming, maintaining, or terminating ties among actors (authors or affiliations) is affected by actors’ covariates such as types of organisations, diversity/specialisation of the research undertaken, and status. These findings have potential to provide important inputs for policymaking process in the case of emerging technologies. (Author)

  11. Networks dynamics in the case of emerging technologies

    International Nuclear Information System (INIS)

    Rotolo, D

    2016-01-01

    This research in progress aims at increasing our understanding of how collaborative networks form, evolve and are configured in the case of emerging technologies. The architecture of the relationships among the variety of organisational actors involved in the emergence process exerts a significant influence in shaping technological change in certain directions rather than others, especially in the early stage of emergence. As a result, socially optimal or desirable technological trajectories may be ‘opportunistically’ rejected. Our empirical analysis is based on a case-study of an emerging medical technology, namely ‘microneedles’. On the basis of co-authorship data reported in 1,943 publications on the topic from 1990 to 2014, longitudinal collaboration (co-authorship) networks were built at two levels: affiliation and author. We examined the dynamics of co-authorship networks by building on recent methodological advancements in network analysis, i.e. Exponential Random Graph Models (ERGMs). These models enable us to make statistical inferences about on the extent to which a network configuration occurs more than could be expected by chance and to identify which social mechanisms may be shaping the network in certain configurations. The findings of the statistical analyses (currently in progress) combined with the qualitative understanding of the case will increase our understanding of which mechanisms are more likely to drive the network dynamics in the case of emerging technologies. These include evidence of the extent to which the likelihood of forming, maintaining, or terminating ties among actors (authors or affiliations) is affected by actors’ covariates such as types of organisations, diversity/specialisation of the research undertaken, and status. These findings have potential to provide important inputs for policymaking process in the case of emerging technologies. (Author)

  12. The Impact of Emerging Technology: A Deaf Experience

    Science.gov (United States)

    Ashmore, Don

    2009-01-01

    This paper presents how students who are deaf or who have hearing impairments incorporate emerging technology into their lives. Readers will see how emerging technology plays a role for many of these students in enabling them to make a difference in their communities today. The student profiles in this paper are provided in the following…

  13. Emerging Education Technologies and Research Directions

    Science.gov (United States)

    Spector, J. Michael

    2013-01-01

    Two recent publications report the emerging technologies that are likely to have a significant impact on learning and instruction: (a) New Media Consortium's "2011 Horizon Report" (Johnson, Smith, Willis, Levine & Haywood, 2011), and (b) "A Roadmap for Education Technology" funded by the National Science Foundation in…

  14. Design Anthropology, Emerging Technologies and Alternative Computational Futures

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte

    Emerging technologies are providing a new field for design anthropological inquiry that unite experiences, imaginaries and materialities in complex way and demands new approaches to developing sustainable computational futures.......Emerging technologies are providing a new field for design anthropological inquiry that unite experiences, imaginaries and materialities in complex way and demands new approaches to developing sustainable computational futures....

  15. Keeping learning central: a model for implementing emerging technologies

    Science.gov (United States)

    Willcockson, Irmgard U.; Phelps, Cynthia L.

    2010-01-01

    Felt problem Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. Our solution We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms. PMID:20165698

  16. Emerging energy-efficient technologies for industry

    International Nuclear Information System (INIS)

    Worrell, Ernst; Martin, Nathan; Price, Lynn; Ruth, Michael; Elliott, Neal; Shipley, Anna; Thorn, Jennifer

    2001-01-01

    For this study, we identified about 175 emerging energy-efficient technologies in industry, of which we characterized 54 in detail. While many profiles of individual emerging technologies are available, few reports have attempted to impose a standardized approach to the evaluation of the technologies. This study provides a way to review technologies in an independent manner, based on information on energy savings, economic, non-energy benefits, major market barriers, likelihood of success, and suggested next steps to accelerate deployment of each of the analyzed technologies. There are many interesting lessons to be learned from further investigation of technologies identified in our preliminary screening analysis. The detailed assessments of the 54 technologies are useful to evaluate claims made by developers, as well as to evaluate market potentials for the United States or specific regions. In this report we show that many new technologies are ready to enter the market place, or are currently under development, demonstrating that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The study shows that many of the technologies have important non-energy benefits, ranging from reduced environmental impact to improved productivity. Several technologies have reduced capital costs compared to the current technology used by those industries. Non-energy benefits such as these are frequently a motivating factor in bringing technologies such as these to market. Further evaluation of the profiled technologies is still needed. In particular, further quantifying the non-energy benefits based on the experience from technology users in the field is important. Interactive effects and inter-technology competition have not been accounted for and ideally should be included in any type of integrated technology scenario, for it may help to better evaluate market

  17. RFID Technologies : emerging issues and challenges

    NARCIS (Netherlands)

    Lieshout, M.J. van; Kool, L.

    2007-01-01

    In this paper we will present the results of a technology and policy assessment we have performed on emerging issues and policy challenges of RFID technologies. RFID is a basic component of the future internet of things. A balanced view on opportunities and threats, on drivers and barriers is needed

  18. The role of surgeons in identifying emerging technologies for health technology assessment.

    Science.gov (United States)

    Stafinski, Tania; Topfer, Leigh-Ann; Zakariasen, Ken; Menon, Devidas

    2010-04-01

    Health technology assessment (HTA) is a tool intended to help policy-makers decide which technologies to fund. However, given the proliferation of new technologies, it is not possible to undertake an HTA of each one before it becomes funded. Consequently, "horizon-scanning" processes have been developed to identify emerging technologies that are likely to have a substantial impact on clinical practice. Although the importance of physicians in the adoption of new technologies is well recognized, their role in horizon scanning in Canada has been limited. The purpose of this project was to pilot an approach to engage physicians, specifically surgeons, in provincial horizon-scanning activities. We invited 18 surgeons from Alberta's 2 medical schools to a horizon-scanning workshop to solicit their views on emerging technologies expected to impact surgical practice within the next 5 years and/or the importance of different attributes or characteristics of new technologies. Surgeons, regardless of specialty, identified developments designed to enhance existing minimally invasive surgical techniques, such as endoscopic, robotic and image-guided surgery. Several nonsurgical areas, including molecular genetics and nano technology, were also identified. Of the 13 technology attributes discussed, safety or risk, effectiveness and feasibility were rated as most important. Lastly, participating surgeons expressed an interest in becoming further involved in local HTA initiatives. Surgeons, as adopters and users of health technologies, represent an important and accessible information source for identifying emerging technologies for HTA. A more formal, ongoing relationship between the government, HTA and surgeons may help to optimize the use of HTA resources.

  19. Designing Opportunities for Transformation with Emerging Technologies

    Science.gov (United States)

    Veletsianos, George

    2011-01-01

    In this article, the author argues that technology use in education has focused on combating instructional problems and inefficiencies. While technology use for such purposes is viable and important, the author proposes that practitioners and researchers in this field utilize emerging technologies as a means to provide opportunities for personally…

  20. CANDU technology for generation III + AND IV reactors

    International Nuclear Information System (INIS)

    Torgerson, D.F.

    2005-01-01

    Atomic Energy of Canada Limited (AECL) is the original developer of the CANDU?reactor, one of the three major commercial power reactor designs now used throughout the world. For over 60 years, AECL has continued to evolve the CANDU design from the CANDU prototypes in the 1950s and 1960s through to the second generation reactors now in operation, including the Generation II+ CANDU 6. The next phase of this evolution, the Generation III+ Advanced CANDU ReactorTM (ACRTM), continues the strategy of basing next generation technology on existing CANDU reactors. Beyond the ACR, AECL is developing the Generation IV CANDU Super Critical Water Reactor. Owing to the evolutionary nature of these advanced reactors, advanced technology from the development programs is also being applied to operating CANDU plants, for both refurbishments and upgrading of existing systems and components. In addition, AECL is developing advanced technology that covers the entire life cycle of the CANDU plant, including waste management and decommissioning. Thus, AECL maintains state-of-the-art expertise and technology to support both operating and future CANDU plants. This paper outlines the scale of the current core knowledge base that is the foundation for advancement and support of CANDU technology. The knowledge base includes advancements in materials, fuel, safety, plant operations, components and systems, environmental technology, waste management, and construction. Our approach in each of these areas is to develop the underlying science, carry out integrated engineering scale tests, and perform large-scale demonstration testing. AECL has comprehensive R and D and engineering development programs to cover all of these elements. The paper will show how the ongoing expansion of the CANDU knowledge base has led to the development of the Advanced CANDU Reactor. The ACR is a Generation III+ reactor with substantially reduced costs, faster construction, and enhanced passive safety and operating

  1. Emerging technologies a primer for librarians

    CERN Document Server

    Koerber, Jennifer

    2015-01-01

    Here's a one-stop snapshot of emerging technologies every librarian should know about and examples that illustrate how the technologies are being used in libraries today! The e-book includes videos of interviews with librarians that are using them. The videos are available on a web site for people who purchase the print book. The first four chapters-Audio & Video, Self- and Micro-Publishing, Mobile Technology, and Crowdfunding-all look at older technologies reinvented and reimagined through significant advances in quality, scale, or hardware. Many libraries were already

  2. Emergent information technologies and enabling policies for counter-terrorism

    CERN Document Server

    Popp, R

    2006-01-01

    Explores both counter-terrorism and enabling policy dimensions of emerging information technologies in national security After the September 11th attacks, "connecting the dots" has become the watchword for using information and intelligence to protect the United States from future terrorist attacks. Advanced and emerging information technologies offer key assets in confronting a secretive, asymmetric, and networked enemy. Yet, in a free and open society, policies must ensure that these powerful technologies are used responsibly, and that privacy and civil liberties remain protected. Emergent Information Technologies and Enabling Policies for Counter-Terrorism provides a unique, integrated treatment of cutting-edge counter-terrorism technologies and their corresponding policy options. Featuring contributions from nationally recognized authorities and experts, this book brings together a diverse knowledge base for those charged with protecting our nation from terrorist attacks while preserving our civil liberti...

  3. Exploring memory hierarchy design with emerging memory technologies

    CERN Document Server

    Sun, Guangyu

    2014-01-01

    This book equips readers with tools for computer architecture of high performance, low power, and high reliability memory hierarchy in computer systems based on emerging memory technologies, such as STTRAM, PCM, FBDRAM, etc.  The techniques described offer advantages of high density, near-zero static power, and immunity to soft errors, which have the potential of overcoming the “memory wall.”  The authors discuss memory design from various perspectives: emerging memory technologies are employed in the memory hierarchy with novel architecture modification;  hybrid memory structure is introduced to leverage advantages from multiple memory technologies; an analytical model named “Moguls” is introduced to explore quantitatively the optimization design of a memory hierarchy; finally, the vulnerability of the CMPs to radiation-based soft errors is improved by replacing different levels of on-chip memory with STT-RAMs.   ·         Provides a holistic study of using emerging memory technologies i...

  4. Plasmonics for emerging quantum technologies

    DEFF Research Database (Denmark)

    Bozhevolnyi, Sergey I.; Mortensen, N. Asger

    2017-01-01

    Expanding the frontiers of information processing technologies and, in particular, computing with ever increasing speed and capacity has long been recognized an important societal challenge, calling for the development of the next generation of quantum technologies. With its potential...... to exponentially increase computing power, quantum computing opens up possibilities to carry out calculations that ordinary computers could not finish in the lifetime of the Universe, while optical communications based on quantum cryptography become completely secure. At the same time, the emergence of Big Data...... and the ever increasing demands of miniaturization and energy saving technologies bring about additional fundamental problems and technological challenges to be addressed in scientific disciplines dealing with light-matter interactions. In this context, quantum plasmonics represents one of the most promising...

  5. Plasmonics for emerging quantum technologies

    DEFF Research Database (Denmark)

    Bozhevolnyi, Sergey I.; Mortensen, N. Asger

    2017-01-01

    Expanding the frontiers of information processing technologies and, in particular, computing with ever-increasing speed and capacity has long been recognized as an important societal challenge, calling for the development of the next generation of quantum technologies. With its potential...... to exponentially increase computing power, quantum computing opens up possibilities to carry out calculations that ordinary computers could not finish in the lifetime of the universe, whereas optical communications based on quantum cryptography become completely secure. At the same time, the emergence of Big Data...... and the ever-increasing demands of miniaturization and energy-saving technologies bring about additional fundamental problems and technological challenges to be addressed in scientific disciplines dealing with light-matter interactions. In this context, quantum plasmonics represents one of the most promising...

  6. 75 FR 18484 - Emerging Technology and Research Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2010-04-12

    ... Emerging Technologies Analysis. 2. ETRAC Panel on Emerging Technologies. 3. History of the Laser. 4... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Open Meeting The Emerging Technology and Research Advisory Committee (ETRAC) [[Page...

  7. Learning from Fiction: Applications in Emerging Technologies

    Science.gov (United States)

    Gordon, Ruthanna

    2009-01-01

    Understanding the development of public opinion about emerging technologies, when the scope of that emergence is still speculative, poses particular challenges. Opinions and beliefs may be drawn from conflicting experts in multiple fields, media portrayals with varying biases, and fictional narratives that portray diverse possible futures. This…

  8. Emerging technologies for biotherapeutic bioanalysis from a high-throughput and multiplexing perspective: insights from an AAPS emerging technology action program committee.

    Science.gov (United States)

    Purushothama, Shobha; Dysinger, Mark; Chen, Yao; Österlund, Karolina; Mora, Johanna; Chunyk, Allison Given; Peloquin, Russ

    2018-02-01

    This manuscript aims to provide insights and updates on emerging technologies from a throughput and multiplexing perspective and to update readers on changes in previously reported technologies. The technologies discussed range from nascent (ultrasensitive Cira, Intellicyt ® , Dynaxi and Captsure™) to the more established (Ella and SQIDlite™). For the nascent technologies, there was an emphasis on user interviews and reviews, where available, to help provide an unbiased view to our readers. For the Ella, a review of published user data as well as author and other user experiences are summarized. Due to their emergent nature, all the technologies described are applicable in the early drug development stage, may require an upfront investment of capital and may not perform as expected.

  9. Emerging technologies in healthcare: navigating risks, evaluating rewards.

    Science.gov (United States)

    McGrady, Elizabeth; Conger, Sue; Blanke, Sandra; Landry, Brett J L

    2010-01-01

    The purpose of this prescriptive research is to help decision makers become better informed about three technologies emerging in the healthcare arena by providing a basic description of the technology and describing their current applications, future healthcare deployment, potential risks, and related managerial issues. Two of the technologies, radio frequency identification (RFID) and global positioning systems (GPS), are currently available to healthcare organizations and appear capable of decreasing cost but may require significant initial investment and have disruptive potential. The third technology, nanotechnology, has limited current use but may revolutionize both the delivery of medicine and hospital infrastructure management. With cautious attention to managerial issues and meticulous attention to implementation details, healthcare organizations that can successfully navigate the coming technologically driven paradigm shifts will emerge more resilient organizations.

  10. A framework for interactive learning in emerging technologies

    OpenAIRE

    Rens L.J. Vandeberg; Ellen H.M. Moors

    2008-01-01

    Innovation is an interactive learning process which is of special interest for emerging technologies in which complex complementary knowledge from heterogeneous stakeholders is combined. In the emerging phase of technology development a lot of knowledge is tacit and can only be transferred face-to-face. At the same time a shared vision between stakeholders is being formed that acts as a driver for innovation. Although the importance of interactive learning is widely acknowledged, an adequate ...

  11. Emergency Medical Service (EMS): Rotorcraft Technology Workshop

    Science.gov (United States)

    Bauchspies, J. S.; Adams, R. J.

    1981-01-01

    A lead organization on the national level should be designated to establish concepts, locations, and the number of shock trauma air medical services. Medical specialists desire a vehicle which incorporates advances in medical technology trends in health care. Key technology needs for the emergency medical services helicopter of the future include the riding quality of fixed wing aircraft (reduced noise and vibration), no tail rotor, small rotor, small rotor diameter, improved visibility, crashworthy vehicle, IFR capability, more affordability high reliability, fuel efficient, and specialized cabins to hold medical/diagnostic and communications equipment. Approaches to a national emergency medical service are discussed.

  12. Overview of emerging nonvolatile memory technologies.

    Science.gov (United States)

    Meena, Jagan Singh; Sze, Simon Min; Chand, Umesh; Tseng, Tseung-Yuen

    2014-01-01

    Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new

  13. Overview of emerging nonvolatile memory technologies

    Science.gov (United States)

    2014-01-01

    Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new

  14. Technology evolves to save lives: emergency lighting

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, D.

    2001-02-01

    With an increase in deadly fires in industrial facilities, there has been a revival of national fire safety and prevention awareness. This article discusses emergency lighting technology as one specific area of significant advancements in fire safety, with a focus on the use of emergency lighting using light emitting diodes (LEDs), which is far and away a more economical and energy efficient light source than the incandescent and fluorescent lamps used previously. Besides being economical and energy-efficient, LEDs are compact in size, are characterized as having low wattage, low heat, long life, uniform brightness and compatibility with integrated circuits. Red has always been the traditional wavelength because it scatters light much less than blue, but green exit lights appear to have been favored recently because the sensitivity of the human eye increases with shorter wavelengths. Selection criteria for LEDs are provided. The use of laser light technology, in conjunction with exist signs, is also discussed. This technology uses a Class 3 laser option which activates a red light beam when in the emergency mode, pointing down the path of egress, providing directional light up to 40 feet, depending on the intensity of the smoke. Some newer emergency lighting products also have strobe features to assist the hearing impaired since they are not able to hear fire alarms.

  15. Final Technical Report: Characterizing Emerging Technologies.

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hansen, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Riley, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The Characterizing Emerging Technologies project focuses on developing, improving and validating characterization methods for PV modules, inverters and embedded power electronics. Characterization methods and associated analysis techniques are at the heart of technology assessments and accurate component and system modeling. Outputs of the project include measurement and analysis procedures that industry can use to accurately model performance of PV system components, in order to better distinguish and understand the performance differences between competing products (module and inverters) and new component designs and technologies (e.g., new PV cell designs, inverter topologies, etc.).

  16. New and emerging technologies for genetic toxicity testing.

    Science.gov (United States)

    Lynch, Anthony M; Sasaki, Jennifer C; Elespuru, Rosalie; Jacobson-Kram, David; Thybaud, Véronique; De Boeck, Marlies; Aardema, Marilyn J; Aubrecht, Jiri; Benz, R Daniel; Dertinger, Stephen D; Douglas, George R; White, Paul A; Escobar, Patricia A; Fornace, Albert; Honma, Masamitsu; Naven, Russell T; Rusling, James F; Schiestl, Robert H; Walmsley, Richard M; Yamamura, Eiji; van Benthem, Jan; Kim, James H

    2011-04-01

    The International Life Sciences Institute (ILSI) Health and Environmental Sciences Institute (HESI) Project Committee on the Relevance and Follow-up of Positive Results in In Vitro Genetic Toxicity (IVGT) Testing established an Emerging Technologies and New Strategies Workgroup to review the current State of the Art in genetic toxicology testing. The aim of the workgroup was to identify promising technologies that will improve genotoxicity testing and assessment of in vivo hazard and risk, and that have the potential to help meet the objectives of the IVGT. As part of this initiative, HESI convened a workshop in Washington, DC in May 2008 to discuss mature, maturing, and emerging technologies in genetic toxicology. This article collates the abstracts of the New and Emerging Technologies Workshop together with some additional technologies subsequently considered by the workgroup. Each abstract (available in the online version of the article) includes a section addressed specifically to the strengths, weaknesses, opportunities, and threats associated with the respective technology. Importantly, an overview of the technologies and an indication of how their use might be aligned with the objectives of IVGT are presented. In particular, consideration was given with regard to follow-up testing of positive results in the standard IVGT tests (i.e., Salmonella Ames test, chromosome aberration assay, and mouse lymphoma assay) to add weight of evidence and/or provide mechanism of action for improved genetic toxicity risk assessments in humans. Copyright © 2010 Wiley-Liss, Inc.

  17. Digital Natives: Creating Emergent Exhibitions through Digital Technologies

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Iversen, Ole Sejer; Dindler, Christian

    2011-01-01

    . In this way, digital technology can contribute to the creation of emergent exhibitions in which the exhibition is created in dialogue between audiences and the museum. We present experiences from a current research project, the Digital Natives exhibition, in which digital technology was designed......Digital Technology can support the creation of dialogical spaces in the museum, both playful and reflective, that allow audiences to engage in the ongoing construction and reproduction of cultural heritage creating novel connections between self and others and between past, present and future...... as an integral part of the exhibition to encourage dialogue between audiences and the exhibition materials and thereby investigate how the exhibition emerge as a result of this dialogic co-construction inside the exhibition space. In short, the opportunities offered by digital technologies prompts us to consider...

  18. Policy implications of emerging vehicle and infrastructure technology.

    Science.gov (United States)

    2014-08-01

    This report considers a broad range of emerging transportation technologies that have potential : for enhancing travel on and operations of the Texas transportation system. It provides an : overview of technology classifications and assesses the poli...

  19. Emerging technologies in electricity generation : an energy market assessment

    International Nuclear Information System (INIS)

    2006-03-01

    Canada's National Energy Board (NEB) monitors the supply of electricity as well as its demand in both domestic and export markets. It monitors the main drivers affecting current trends in generation, demand, prices, infrastructure additions, and inter-regional and international trade. This document presented an assessment of renewable and other emerging technologies that are considered to have significant promise and increased application in Canada over the longer term. It provided comprehensive information on the status and prospects for these technologies, related issues and regional perspectives. Alternative and renewable resources and demand management are becoming more important in addressing air quality issues and supply adequacy. In preparation of this report, staff at the NEB participated in a series of informal meetings with electric utilities, independent power producers, provincial energy regulators, power system operators and those engaged in technology development. The report involved on-site information gathering at wind farms, small hydro facilities, biomass, solar and geothermal operations and other facilities associated with emerging energy technologies such as fuel cells and ocean energy. Clean coal technologies that refer to methods by which emissions from coal-fired generation can be reduced were also evaluated. It was noted that the prospects for emerging technologies vary among the provinces and territories depending on regional resources, provincial government policies and strategies regarding fuel preferences. It was noted that currently in Canada, only 3 per cent of the installed generating capacity consists of emerging technologies. This low penetration is due to the low cost of electricity derived from conventional sources and to the structure of the industry in which large publicly owned utilities have historically opted for large central generating stations. It was suggested that the large increase in fossil fuel prices, public concern

  20. The great downside dilemma for risky emerging technologies

    International Nuclear Information System (INIS)

    Baum, Seth D

    2014-01-01

    Some emerging technologies promise to significantly improve the human condition, but come with a risk of failure so catastrophic that human civilization may not survive. This article discusses the great downside dilemma posed by the decision of whether or not to use these technologies. The dilemma is: use the technology, and risk the downside of catastrophic failure, or do not use the technology, and suffer through life without it. Historical precedents include the first nuclear weapon test and messaging to extraterrestrial intelligence. Contemporary examples include stratospheric geoengineering, a technology under development in response to global warming, and artificial general intelligence, a technology that could even take over the world. How the dilemma should be resolved depends on the details of each technology’s downside risk and on what the human condition would otherwise be. Meanwhile, other technologies do not pose this dilemma, including sustainable design technologies, nuclear fusion power, and space colonization. Decisions on all of these technologies should be made with the long-term interests of human civilization in mind. This paper is part of a series of papers based on presentations at the Emerging Technologies and the Future of Humanity event held at the Royal Swedish Academy of Sciences on 17 March 2014. (invited comment)

  1. Virtually Nursing: Emerging Technologies in Nursing Education.

    Science.gov (United States)

    Foronda, Cynthia L; Alfes, Celeste M; Dev, Parvati; Kleinheksel, A J; Nelson, Douglas A; OʼDonnell, John M; Samosky, Joseph T

    Augmented reality and virtual simulation technologies in nursing education are burgeoning. Preliminary evidence suggests that these innovative pedagogical approaches are effective. The aim of this article is to present 6 newly emerged products and systems that may improve nursing education. Technologies may present opportunities to improve teaching efforts, better engage students, and transform nursing education.

  2. US public policy and emerging technologies: the case of solar energy

    International Nuclear Information System (INIS)

    Rahm, Dianne

    1993-01-01

    Public policy is generally believed to have an effect on the emergence and rate of diffusion of technology. Solar energy technologies are no exception. This article explores the relationship between a variety of United States (US) public policies and the emergence and diffusion of solar energy technologies using data gathered as part of the National Solar Energy Policy Study. The article presents findings regarding the status and policy position of US renewable energy research and development (R and D) and manufacturing organizations. Specific policy options which could be adopted to speed emergence and diffusion of solar energy technology products are discussed. (Author)

  3. Colloidal nanophotonics: the emerging technology platform.

    Science.gov (United States)

    Gaponenko, Sergey; Demir, Hilmi Volkan; Seassal, Christian; Woggon, Ulrike

    2016-01-25

    Dating back to decades or even centuries ago, colloidal nanophotonics during the last ten years rapidly extends towards light emitting devices, lasers, sensors and photonic circuitry to manifest itself as an emerging technology platform rather than an entirely academic research field.

  4. Flexible UAV Mission Management Using Emerging Technologies

    National Research Council Canada - National Science Library

    Desimone, Roberto; Lee, Richard

    2002-01-01

    This paper discusses recent results and proposed work in the application of emerging artificial intelligence technologies for flexible mission management, especially for unmanned (combat) airborne vehicles...

  5. 78 FR 70917 - Emerging Technology and Research Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2013-11-27

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Open Meeting The Emerging Technology and Research Advisory Committee (ETRAC) will meet... Secretary for Export Administration on emerging technology and research activities, including those related...

  6. 77 FR 39209 - Emerging Technology and Research Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2012-07-02

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Open Meeting The Emerging Technology and Research Advisory Committee (ETRAC) will meet... Secretary for Export Administration on emerging technology and research activities, including those related...

  7. 77 FR 59374 - Emerging Technology and Research Advisory Committee; Notice of Open Meeting

    Science.gov (United States)

    2012-09-27

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Open Meeting The Emerging Technology and Research Advisory Committee (ETRAC) will meet... Secretary for Export Administration on emerging technology and research activities, including those related...

  8. Teaching Design of Emerging Embodied Technologies

    DEFF Research Database (Denmark)

    Majgaard, Gunver

    2014-01-01

    How does design of emerging embodied technologies enrich the HCI learning processes? We introduce a model for embodied interaction and use it in the development of a painting app for children, based on the motion sensor Asus Xtion Pro (similar to Kinect). The development of the app was part....... Subsequently, we introduce a physical-digital toolbox, illustrating the span of parameters within the model for embodied interaction: Robot Technology, Tangibles, Wearables, Interactive Surroundings, and Bigger Objects....

  9. Privacy Attitudes among Early Adopters of Emerging Health Technologies.

    Directory of Open Access Journals (Sweden)

    Cynthia Cheung

    Full Text Available Advances in health technology such as genome sequencing and wearable sensors now allow for the collection of highly granular personal health data from individuals. It is unclear how people think about privacy in the context of these emerging health technologies. An open question is whether early adopters of these advances conceptualize privacy in different ways than non-early adopters.This study sought to understand privacy attitudes of early adopters of emerging health technologies.Transcripts from in-depth, semi-structured interviews with early adopters of genome sequencing and health devices and apps were analyzed with a focus on participant attitudes and perceptions of privacy. Themes were extracted using inductive content analysis.Although interviewees were willing to share personal data to support scientific advancements, they still expressed concerns, as well as uncertainty about who has access to their data, and for what purpose. In short, they were not dismissive of privacy risks. Key privacy-related findings are organized into four themes as follows: first, personal data privacy; second, control over personal information; third, concerns about discrimination; and fourth, contributing personal data to science.Early adopters of emerging health technologies appear to have more complex and nuanced conceptions of privacy than might be expected based on their adoption of personal health technologies and participation in open science. Early adopters also voiced uncertainty about the privacy implications of their decisions to use new technologies and share their data for research. Though not representative of the general public, studies of early adopters can provide important insights into evolving attitudes toward privacy in the context of emerging health technologies and personal health data research.

  10. Privacy Attitudes among Early Adopters of Emerging Health Technologies.

    Science.gov (United States)

    Cheung, Cynthia; Bietz, Matthew J; Patrick, Kevin; Bloss, Cinnamon S

    2016-01-01

    Advances in health technology such as genome sequencing and wearable sensors now allow for the collection of highly granular personal health data from individuals. It is unclear how people think about privacy in the context of these emerging health technologies. An open question is whether early adopters of these advances conceptualize privacy in different ways than non-early adopters. This study sought to understand privacy attitudes of early adopters of emerging health technologies. Transcripts from in-depth, semi-structured interviews with early adopters of genome sequencing and health devices and apps were analyzed with a focus on participant attitudes and perceptions of privacy. Themes were extracted using inductive content analysis. Although interviewees were willing to share personal data to support scientific advancements, they still expressed concerns, as well as uncertainty about who has access to their data, and for what purpose. In short, they were not dismissive of privacy risks. Key privacy-related findings are organized into four themes as follows: first, personal data privacy; second, control over personal information; third, concerns about discrimination; and fourth, contributing personal data to science. Early adopters of emerging health technologies appear to have more complex and nuanced conceptions of privacy than might be expected based on their adoption of personal health technologies and participation in open science. Early adopters also voiced uncertainty about the privacy implications of their decisions to use new technologies and share their data for research. Though not representative of the general public, studies of early adopters can provide important insights into evolving attitudes toward privacy in the context of emerging health technologies and personal health data research.

  11. Emerging Computation and Information teChnologies for Education : Proceeding of 2012 International Conference on Emerging Computation and Information teChnologies for Education

    CERN Document Server

    Xu, Linli; Tian, Wenya

    2012-01-01

    The 2012 International Conference on Emerging Computation and Information teChnologies for Education (ECICE 2012) was  held on Jan. 15-16, 2012, Hangzhou, China.  The main results of the conference are presented in this proceedings book of carefully reviewed and accepted paper addressing the hottest issues in emerging computation and information technologies used for education. The volume covers a wide series of topics in the area, including Computer-Assisted Education, Educational Information Systems, Web-based Learning, etc.

  12. Information technology and emergency management: preparedness and planning in US states.

    Science.gov (United States)

    Reddick, Christopher

    2011-01-01

    The purpose of this paper is to examine the impact of information technology (IT) on emergency preparedness and planning by analysing a survey of US state government departments of emergency management. The research results show that there has been a significant impact of IT on emergency planning. IT has proven to be effective for all phases of emergency management, but especially for the response phase. There are numerous technologies used in emergency management, ranging from the internet, Geographic Information Systems and wireless technologies to more advanced hazard analysis models. All were generally viewed as being effective. Lack of financial resources and support from elected officials is a perennial problem in public administration, and was found to be prevalent in this study of IT and emergency management. There was evidence that state governments rating high on a performance index were more likely to use IT for emergency management. © 2011 The Author(s). Disasters © Overseas Development Institute, 2011.

  13. Plasmonics for emerging quantum technologies

    Directory of Open Access Journals (Sweden)

    Bozhevolnyi Sergey I.

    2017-01-01

    Full Text Available Expanding the frontiers of information processing technologies and, in particular, computing with ever-increasing speed and capacity has long been recognized as an important societal challenge, calling for the development of the next generation of quantum technologies. With its potential to exponentially increase computing power, quantum computing opens up possibilities to carry out calculations that ordinary computers could not finish in the lifetime of the universe, whereas optical communications based on quantum cryptography become completely secure. At the same time, the emergence of Big Data and the ever-increasing demands of miniaturization and energy-saving technologies bring about additional fundamental problems and technological challenges to be addressed in scientific disciplines dealing with light-matter interactions. In this context, quantum plasmonics represents one of the most promising and fundamental research directions and, indeed, the only one that enables the ultimate miniaturization of photonic components for quantum optics when being taken to extreme limits in light-matter interactions.

  14. Advanced information technology for training and emergency management

    International Nuclear Information System (INIS)

    Wahlstroem, B.

    1989-01-01

    Modern information technology provides many possibilities for improving both the safety and the availability of nuclear installations. A Nordic research programme was started in 1977, in which several organizations in Denmark, Finland, Norway and Sweden has been participating. The work has on a general level been addressing control rooms, human reliability and information technology for nuclear power plants. The research has had impact on the development of the control room solutions and the training simulators in Finland and also in the other Nordic countries. The present phase of the Nordic cooperation is investigating the use of advanced information technology in emergency management. The paper gives a brief introduction to the use of advance information technology for training and emergency management, which is based on the experience from the Nordic projects and other similar application projects in Finland. The paper includes also references to results from several of the projects. (author)

  15. Emerging Technologies: Web 2.0.

    Science.gov (United States)

    Holt, Claire

    2011-03-01

    Web 2.0 has brought a change to how we communicate and disseminate information with the use of Twitter, Facebook, YouTube, instant messaging and blogging. This technology is beginning to be used in the health field for public awareness campaigns, emergency health alerts, medical education and remote healthcare services. Australian Health Information Managers will be called upon to reconcile their organisations' policies and procedures regarding the use of Web 2.0 technologies within the existing legal framework of privacy, confidentiality and consent. This article explores various applications of Web 2.0, their benefits and some of their potential legal and ethical implications when implemented in Australia.

  16. Empowering School Teachers for Emerging Technologies: An Action Plan

    Science.gov (United States)

    Misra, Pradeep Kumar

    2010-01-01

    "Possessing openness to emerging technologies is critical for teachers in the technology-rich 21st Century as technology continues to accelerate at a rapid rate. Readiness for new technologies is a challenge associated with change. Teachers who resist change may impede and/or limit their students' learning and skills. Teachers, therefore,…

  17. Emerging technologies for knowledge resource management

    CERN Document Server

    Pandian, M

    2007-01-01

    Emerging Technologies for Knowledge Resource Management examines various factors that contribute to an enabled environment for optimum utilisation of information resources. These include the digital form of information resources, which are inherently sharable, consortia as a concept to bring people and materials together and unified portals as technology to bring together disparate and heterogeneous resources for sharing and access. The book provides a step-by-step guideline for system analysis and requirements analysis. The book also provides reviews of existing portal models for sharing reso

  18. Emerging Technologies for Autonomous Language Learning

    Directory of Open Access Journals (Sweden)

    Mark Warschauer

    2011-09-01

    Full Text Available Drawing on a lengthier review completed for the US National Institute for Literacy, this paper examines emerging technologies that are applicable to self-access and autonomous learning in the areas of listening and speaking, collaborative writing, reading and language structure, and online interaction. Digital media reviewed include podcasts, blogs, wikis, online writing sites, text-scaffolding software, concordancers, multiuser virtual environments, multiplayer games, and chatbots. For each of these technologies, we summarize recent research and discuss possible uses for autonomous language learning.

  19. The impact of emerging technology on nursing care: warp speed ahead.

    Science.gov (United States)

    Huston, Carol

    2013-05-31

    While myriad forces are changing the face of contemporary healthcare, one could argue that nothing will change the way nursing is practiced more than current advances in technology. Indeed, technology is changing the world at warp speed and nowhere is this more evident than in healthcare settings. This article identifies seven emerging technologies that will change the practice of nursing; three skill sets nurses will need to develop to acquire, use, and integrate these emerging technologies; and four challenges nurse leaders will face in integrating this new technology.

  20. Identification and assessment of site treatment plan implementation opportunities for emerging technologies

    International Nuclear Information System (INIS)

    Bernard, E.A.

    1995-01-01

    The Department of Energy (DOE), in response to the 1992 Federal Facility Compliance Act, has prepared Site Treatment Plans (STP) for the approximately 2,000 waste streams identified within its mixed waste inventory Concurrently, emerging mixed waste treatment technologies are in final development. This paper defines a three-phase process to identify and assess implementation opportunities for these emerging technologies within the STP. It highlights the first phase, functional matching of expected treatment capabilities with proposed treatment requirements. Matches are based on treatment type, regulated contaminant and waste matrix type, for both capabilities and requirements. Results identify specific waste streams and volumes that could be treated by each emerging technology. A study for Plasma Hearth Process, Delphi DETOX sm , Supercritical Water Oxidation and Vitrification shows that about 200,000 ml of DOE's mixed waste inventory can potentially be treated by one or more of these emerging technologies. Actual implementations are small fractions of the treatable inventory. Differences between potential and actual implementations must be minimized to accrue optimum benefit from implementation of emerging or alternative treatment technologies. Functional matching is the first phase in identifying and quantifying benefits, addressing technology system and treatment issues, and providing, in part, the basis for STP implementation decisions. DOE, through EM's Office of Technology Development, has funded this work

  1. Key Emerging Technologies for Postsecondary Education

    Science.gov (United States)

    Johnson, Laurence F.; Levine, Alan; Smith, Rachel S.; Haywood, Keene

    2010-01-01

    The annual "Horizon Report" describes the continuing work of the New Media Consortium's Horizon Project, a qualitative research project established in 2002 that identifies and describes emerging technologies likely to have a large impact on teaching, learning, or creative inquiry on college and university campuses within the next five years. This…

  2. 76 FR 10004 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-02-23

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  3. 76 FR 54734 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-09-02

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  4. 76 FR 30647 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-05-26

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  5. 75 FR 41439 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-07-16

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... the Assistant Secretary for Export Administration on emerging technology and research activities...

  6. Expert system technology to support emergency response: its prospects and limitations

    International Nuclear Information System (INIS)

    Belardo, S.; Wallace, W.A.

    1988-01-01

    The capabilities for computer technologies to provide decision support in emergency response are now well recognized. The information flow prior to, during, and after potentially catastrophic events must be managed in order to have effective response. We feel strongly that computer technology can be a crucial component in this management process. We will first review a relatively new facet of computer technology - expert systems. We will then provide a conceptual framework for decision making under crisis, a situation typified by emergency response. We follow with a discussion of a prototype expert system for response to an accident at a nuclear power generation facility. Our final section discusses the potential advantages and limitations of expert system technology in emergency response. (author)

  7. 75 FR 72792 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-11-26

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  8. 77 FR 70140 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2012-11-23

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Export Administration on emerging technology and research activities, including those related to deemed...

  9. 75 FR 5952 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-02-05

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  10. 76 FR 72902 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2011-11-28

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  11. 75 FR 62508 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2010-10-12

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  12. 78 FR 21346 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting

    Science.gov (United States)

    2013-04-10

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting The Emerging Technology and Research Advisory Committee (ETRAC... Office of the Assistant Secretary for Export Administration on emerging technology and research...

  13. Managing threats from emerging technologies: can safeguards show the way?

    International Nuclear Information System (INIS)

    Leffer, Teri N.

    2014-01-01

    The system of international nuclear safeguards implemented by the International Atomic Energy Agency (IAEA) is primarily a means of verification of states’ commitments under various legal instruments, principally the Nuclear Non‑Proliferation Treaty (NPT), to utilize controlled nuclear fission for peaceful purposes only. However, the safeguards system can also be seen as a mechanism through which states acted to reduce the threat posed by a new technology that had a transformative impact on existing national security paradigms when it emerged in the twentieth century. In the twenty‑first century, new technologies with equally profound national security implications are emerging. These include biotechnology and synthetic biology, nano technology, information technology, cognitive science, robotics and artificial intelligence. Throughout its history, the safeguards system has evolved to accommodate new technologies, new undertakings and new threats. Because multiple emerging technologies now constitute potential national security threats, it is appropriate to consider whether and how the lessons and successes of the safeguards system, including its capacity to evolve in response to changing requirements, could be leveraged to mitigate the threat posed by these new technologies. This paper addresses the possibility of re‑imagining safeguards in a way that makes them applicable to a broader range of technology‑based threats without compromising their effectiveness for their original purpose.

  14. Intelligent web data management software architectures and emerging technologies

    CERN Document Server

    Ma, Kun; Yang, Bo; Sun, Runyuan

    2016-01-01

    This book presents some of the emerging techniques and technologies used to handle Web data management. Authors present novel software architectures and emerging technologies and then validate using experimental data and real world applications. The contents of this book are focused on four popular thematic categories of intelligent Web data management: cloud computing, social networking, monitoring and literature management. The Volume will be a valuable reference to researchers, students and practitioners in the field of Web data management, cloud computing, social networks using advanced intelligence tools.

  15. REMEDIATION TECHNOLOGY EVALUATION AT THE GILT EDGE MINE, SOUTH DAKOTA

    Science.gov (United States)

    This document reports the findings of the Mine Waste Technology Program's Activity III, Project 29,The Remediation Technology Evaluation Project at the Gilt Edge Mine, S.D. This project consisted of evaluating three emerging acidic waste rock stabilization technologies and compar...

  16. CSIR R&D in emerging manufacturing technologies

    CSIR Research Space (South Africa)

    Trollip, Neil

    2017-10-01

    Full Text Available This presentation discusses Advanced Robotics and Emerging manufacturing technologies by Dr Neil Trollip, at the 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017, CSIR International Convention Centre, Pretoria...

  17. Academic versus Non-Academic Emerging Adult College Student Technology Use

    Science.gov (United States)

    Swanson, Joan Ann; Walker, Erica

    2015-01-01

    Emerging adult college students have developmental and educational needs which are unique to their phase of life. Emerging adults are also increasingly identified by their technology use and practices. Collegiate instructors will be better equipped for educating these individuals when armed with insights concerning emerging adults' technology…

  18. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    International Nuclear Information System (INIS)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-01-01

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of technology

  19. Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Turteltaub, K W; Hartman-Siantar, C; Easterly, C; Blakely, W

    2005-10-03

    A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus of gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of

  20. Emerging Requirements for Technology Management: A Sector-based Scenario Planning Approach

    Directory of Open Access Journals (Sweden)

    Simon Patrick Philbin

    2013-09-01

    Full Text Available Identifying the emerging requirements for technology management will help organisations to prepare for the future and remain competitive. Indeed technology management as a discipline needs to develop and respond to societal and industrial needs as well as the corresponding technology challenges. Therefore, following a review of technology forecasting methodologies, a sector-based scenario planning approach has been used to derive the emerging requirements for technology management. This structured framework provided an analytical lens to focus on the requirements for managing technology in the healthcare, energy and higher education sectors over the next 5-10 years. These requirements include the need for new business models to support the adoption of technologies; integration of new technologies with existing delivery channels; management of technology options including R&D project management; technology standards, validation and interoperability; and decision-making tools to support technology investment.

  1. Identification and assessment of site treatment plan implementation opportunities for emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, E.A. [Sandia National Labs., Germantown, MD (United States)

    1995-12-31

    The Department of Energy (DOE), in response to the 1992 Federal Facility Compliance Act, has prepared Site Treatment Plans (STP) for the approximately 2,000 waste streams identified within its mixed waste inventory Concurrently, emerging mixed waste treatment technologies are in final development. This paper defines a three-phase process to identify and assess implementation opportunities for these emerging technologies within the STP. It highlights the first phase, functional matching of expected treatment capabilities with proposed treatment requirements. Matches are based on treatment type, regulated contaminant and waste matrix type, for both capabilities and requirements. Results identify specific waste streams and volumes that could be treated by each emerging technology. A study for Plasma Hearth Process, Delphi DETOX{sup sm}, Supercritical Water Oxidation and Vitrification shows that about 200,000 ml of DOE`s mixed waste inventory can potentially be treated by one or more of these emerging technologies. Actual implementations are small fractions of the treatable inventory. Differences between potential and actual implementations must be minimized to accrue optimum benefit from implementation of emerging or alternative treatment technologies. Functional matching is the first phase in identifying and quantifying benefits, addressing technology system and treatment issues, and providing, in part, the basis for STP implementation decisions. DOE, through EM`s Office of Technology Development, has funded this work.

  2. Risoe energy report 2. New and emerging bioenergy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H; Kossmann, J; Soenderberg Petersen, L [eds.

    2003-11-01

    Three growing concerns - sustainability (particularly in the transport sector), security of energy supply and climate change - have combined to increase interest in bioenergy. The trend towards bioenergy has been further encouraged by technological advances in biomass conversion and significant changes in energy markets. We even have a new term, 'modern bioenergy', to cover those areas of bioenergy technology - traditional as well as emerging - that could expand the role of bioenergy. Besides its potential to be carbon-neutral if produced sustainable, modern bioenergy shows the promise of covering a considerable part of the world's energy needs, increasing the security of energy supply through the use of indigenous resources, and improving local employment and land-use. To make these promises, however, requires further R and D. This report provides a critical examination of modern bioenergy, and describes current trends in both established and emerging bioenergy technologies. As well as examining the implications for the global energy scene, the report draws national conclusions for European and Danish energy supply, industry and energy research. The report presents the status of current R and D in biomass resources, supply systems, end products and conversion methods. A number of traditional and modern bioenergy technologies are assessed to show their current status, future trends and international R and D plans. Recent studies of emerging bioenergy technologies from international organisations and leading research organisations are reviewed. (BA)

  3. Emerging methods, technologies and process management in software engineering

    CERN Document Server

    Ferrucci, Filomena; Tortora, Genny; Tucci, Maurizio

    2007-01-01

    A high-level introduction to new technologies andmethods in the field of software engineering Recent years have witnessed rapid evolution of software engineering methodologies, and until now, there has been no single-source introduction to emerging technologies in the field.

  4. Community response grids: using information technology to help communities respond to bioterror emergencies.

    Science.gov (United States)

    Jaeger, Paul T; Fleischmann, Kenneth R; Preece, Jennifer; Shneiderman, Ben; Wu, Philip Fei; Qu, Yan

    2007-12-01

    Access to accurate and trusted information is vital in preparing for, responding to, and recovering from an emergency. To facilitate response in large-scale emergency situations, Community Response Grids (CRGs) integrate Internet and mobile technologies to enable residents to report information, professional emergency responders to disseminate instructions, and residents to assist one another. CRGs use technology to help residents and professional emergency responders to work together in community response to emergencies, including bioterrorism events. In a time of increased danger from bioterrorist threats, the application of advanced information and communication technologies to community response is vital in confronting such threats. This article describes CRGs, their underlying concepts, development efforts, their relevance to biosecurity and bioterrorism, and future research issues in the use of technology to facilitate community response.

  5. Developing an active emergency medical service system based on WiMAX technology.

    Science.gov (United States)

    Li, Shing-Han; Cheng, Kai-An; Lu, Wen-Hui; Lin, Te-Chang

    2012-10-01

    The population structure has changed with the aging of population. In the present, elders account for 10.63% of the domestic population and the percentage is still gradually climbing. In other words, the demand for emergency services among elders in home environment is expected to grow in the future. In order to improve the efficiency and quality of emergency care, information technology should be effectively utilized to integrate medical systems and facilities, strengthen human-centered operation designs, and maximize the overall performance. The improvement in the quality and survival rate of emergency care is an important basis for better life and health of all people. Through integrated application of medical information systems and information communication technology, this study proposes a WiMAX-based emergency care system addressing the public demands for convenience, speed, safety, and human-centered operation of emergency care. This system consists of a healthcare service center, emergency medical service hospitals, and emergency ambulances. Using the wireless transmission capability of WiMAX, patients' physiological data can be transmitted from medical measurement facilities to the emergency room and emergency room doctors can provide immediate online instructions on emergency treatment via video and audio transmission. WiMAX technology enables the establishment of active emergency medical services.

  6. Emerging Technologies and Ethics: A Race-to-the-Bottom or the Top?

    NARCIS (Netherlands)

    Gouvea, R.; Linton, J.D.; Linton, Jonathan; Montoya, M.; Walsh, Steven Thomas

    2012-01-01

    Does national success with an emerging technology require ethical sacrifices? This question is considered through the simultaneous consideration of ethics, investment, and outcomes in the nine jurisdictions that are making the largest investments in nanotechnologies—an important emerging technology.

  7. Potential applications of advanced information technology in emergency management

    International Nuclear Information System (INIS)

    Andersson, H.; Holmstrom, C.

    1987-01-01

    Within nuclear-, offshore- and petrochemical industries there is always a potential risk for severe incidents and accidents. It is a commonly shared belief that timely and correct decisions in these situations could either prevent an incident to develop into a severe accident or to mitigate the negative consequences of an accident. It is also a common belief that in those cases where poor decisions have been taken it has been because of insufficient access to information and expert knowledge when the decisions were taken. These are the background experiences for the joint Nordic research program on the use of advanced information technology in emergency preparedness organizations. Important initial research tasks in the program have been to identify and specify the needs for advanced information technology applications in emergency preparedness organizations. So far a couple of studies aiming for a needs assessment of advanced information technologies in nuclear power emergency preparedness organizations in Sweden and Finland have been completed. The conclusions from these studies are presented in this paper

  8. Comparative, collaborative, and integrative risk governance for emerging technologies

    OpenAIRE

    LINKOV IGOR; TRUMP BENJAMIN D.; ANKLAM ELKE; BERBUBE DAVID; BOISSEAU PATRICK; CUMMINGS CHRISTOPHER; FERSON SCOTT; FLORIN MARIE-VALENTINE; GOLDSTEIN BERNARD; HRISTOZOV DANAIL; JENSEN KELD ASTRUP; KATALAGARIANAKIS GEORGIOS; KUZMA JENNIFER; LAMBERT JAMES H.; MALLOY TIMOTHY

    2018-01-01

    Various emerging technologies challenge existing governance processes to identify, assess, and manage risk. Though the existing risk-based paradigm has been essential for assessment of many chemical, biological, radiological, and nuclear technologies, a complementary approach may be warranted for the early-stage assessment and management challenges of high uncertainty technologies ranging from nanotechnology to synthetic biology to artificial intelligence, among many others. This ...

  9. New and Emerging Technologies in Treatment of Lower Urinary Tract Symptoms From Benign Prostatic Hyperplasia.

    Science.gov (United States)

    Gupta, Nikhil K; Gange, Steven N; McVary, Kevin T

    2018-03-29

    Lower urinary tract symptoms (LUTS) from bladder outlet obstruction from benign prostatic hyperplasia (BPH) occur in a large percentage of urologic patients. Treatment of this condition with medical and surgical therapy provides symptom relief but has serious adverse effects and causes sexual dysfunction. New technologies to treat BPH-associated LUTS aim to effectively treat urinary symptoms and minimize side effects and sexual dysfunction. To review the efficacy of new and emerging therapies for treatment of LUTS from BPH. A literature search was performed to identify therapies for LUTS from BPH with early outcomes data within the past 5 years. Improvement in International Prostate Symptom Score (IPSS) and effect on sexual functions such as erectile and ejaculatory functions as measured on the International Index of Erectile Function and the Male Sexual Health Questionnaire. Technologies introduced within the past 5 years include techniques using intraprostatic injectables, mechanical devices, and prostatic tissue ablation. Most technologies remain in the development phase and have only phase I and II studies available that show promising alleviation of urinary symptoms. Injectables have not typically surpassed placebo or sham effects, although special cohorts could be exceptions. Thus far, convective water vapor ablation therapy and prostatic urethral lift have shown the most promise, with short- and medium-term data available on phase III studies demonstrating significant improvement in IPSS with minimal impact on sexual function. Many of these technologies are limited in their potential treatment population by prostate size and conformation, whereas other therapies might be more generalizable. Many new technologies aim to treat LUTS from BPH and minimize sexual side effects. Most therapies remain experimental, although prostatic urethral lift and water vapor ablation therapy have been brought to market and show promise. Long-term durability of symptom relief

  10. Emerging Technologies and the Internet of all Things: Implications ...

    African Journals Online (AJOL)

    The quality of education and graduates emerging from a country's educational system is a catalyst for technology innovation and national development index. World class universities are showcasing their innovations in science and technology because their high education curricular put the future of Research and ...

  11. What makes lecturers in higher education use emerging technologies in their teaching?

    Directory of Open Access Journals (Sweden)

    Judy Backhouse

    2013-09-01

    Full Text Available What makes lecturers in higher education use emerging technologies in their teaching? From the literature we know that lecturers make use of teaching and learning technologies in response to top-down initiatives, and that some also initiate bottom-up experiments with their own teaching practice, driven by both pragmatic and pedagogical concerns. This study is particularly interested in what motivates lecturers to try emerging technologies – those teaching and learning technologies that are new, or are used in new ways, or in new contexts to change teaching practices. This paper analyses the responses of university lecturers in South Africa, who use emerging technologies in their teaching, to a national survey which asked what motivates their practice. The rationales that lecturers use to explain their practices include a mix of pedagogic concerns, pragmatism and external imperatives. These rationales speak to common higher education discourses: effective learning, the welfare of students, and oversight and control; efficiency in the face of the conditions of higher education; as well as the external “imperatives” of the knowledge economy and labour market. Alongside these a discourse of empowerment emerged, including resourcefulness in under-resourced contexts, and creative individual responses to higher education challenges. Such discourses seem to imply that lecturers who engage with emerging technologies are asserting themselves creatively and claiming a more positive positioning in the challenging landscape of modern higher education.

  12. Security technology discussion for emergency command system of nuclear power plant

    International Nuclear Information System (INIS)

    Liu Zhenjun

    2014-01-01

    Nuclear power plant emergency command system can provide valuable data for emergency personnel, such as the unit data, weather data, environmental radiation data. In the course of emergency response, the emergency command system provides decision support to quickly and effectively control and mitigate the consequences of the nuclear accident, to avoid and reduce the dose received by staff and the public, to protect the environment and the public. There are high performance requirements on the security of the system and the data transmission. Based on the previous project and new demand after the Fukushima incident, the security technology design of emergency system in nuclear power plant was discussed. The results show that the introduction of information security technology can effectively ensure the security of emergency systems, and enhance the capacity of nuclear power plant to deal with nuclear accidents. (author)

  13. Consumer Value perceptions of food products from emerging processing technologies

    DEFF Research Database (Denmark)

    Perrea, Toula; Grunert, Klaus G; Krystallis Krontalis, Athanasios

    2015-01-01

    Through a qualitative research approach, the present paper aims to explore the range and type of ‘values’ and ‘costs’ in formulating overall Consumer Value (CV) perceptions, in association with two emerging processing technologies that at the outset are neither distinctly positive nor negative...... in the eyes of consumers, in two culturally variant contexts, namely a Western society where technology is often met with skepticism (i.e., the UK); and a non-Western society where technology plays a reassuring role regarding concerns about food safety and quality (i.e., China). Results reveal that the most......-technology counterparts, who ‘allow’ more room for cultural discrepancies to impact on their CV perceptions. Overall, findings support the view that CV perceptions in the context of food produced by means of emerging processing technologies can be successfully analyzed using a multidimensional conceptualization, where CV...

  14. Design principles for global commons: Natural resources and emerging technologies

    Directory of Open Access Journals (Sweden)

    Paul C. Stern

    2011-09-01

    Full Text Available Ostrom’s design principles for managing common pool resources were developed largely by examining local commons involving natural resources. This paper enumerates several key characteristics that distinguish such commons from more complex commons involving global resources and the risks of emerging technologies. It considers the degree to which the design principles transfer to those commons and concludes that although they have considerable external validity, the list needs some modification and elaboration to apply to global resources and risk commons. A list of design principles is offered for global resource commons and the risks of emerging technologies. Applying Ostrom’s approach to global resources and emerging technologies can improve understanding and expand the solution set for these problems from international treaties, top-down national regulation, and interventions in market pricing systems to include non-governmental institutions that embody principles of self-governance.

  15. Risoe energy report 2. New and emerging bioenergy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.; Kossmann, J.; Soenderberg Petersen, L. (eds.)

    2003-11-01

    Three growing concerns - sustainability (particularly in the transport sector), security of energy supply and climate change - have combined to increase interest in bioenergy. The trend towards bioenergy has been further encouraged by technological advances in biomass conversion and significant changes in energy markets. We even have a new term, 'modern bioenergy', to cover those areas of bioenergy technology - traditional as well as emerging - that could expand the role of bioenergy. Besides its potential to be carbon-neutral if produced sustainable, modern bioenergy shows the promise of covering a considerable part of the world's energy needs, increasing the security of energy supply through the use of indigenous resources, and improving local employment and land-use. To make these promises, however, requires further R and D. This report provides a critical examination of modern bioenergy, and describes current trends in both established and emerging bioenergy technologies. As well as examining the implications for the global energy scene, the report draws national conclusions for European and Danish energy supply, industry and energy research. The report presents the status of current R and D in biomass resources, supply systems, end products and conversion methods. A number of traditional and modern bioenergy technologies are assessed to show their current status, future trends and international R and D plans. Recent studies of emerging bioenergy technologies from international organisations and leading research organisations are reviewed. (BA)

  16. Potential for Integrating Diffusion of Innovation Principles into Life Cycle Assessment of Emerging Technologies.

    Science.gov (United States)

    Sharp, Benjamin E; Miller, Shelie A

    2016-03-15

    Life cycle assessment (LCA) measures cradle-to-grave environmental impacts of a product. To assess impacts of an emerging technology, LCA should be coupled with additional methods that estimate how that technology might be deployed. The extent and manner that an emerging technology diffuses throughout a region shapes the magnitude and type of environmental impacts. Diffusion of innovation is an established field of research that analyzes the adoption of new innovations, and its principles can be used to construct scenario models that enhance LCA of emerging technologies. Integrating diffusion modeling techniques with an LCA of emerging technology can provide estimates for the extent of market penetration, the displacement of existing systems, and the rate of adoption. Two general perspectives of application are macro-level diffusion models that use a function of time to represent adoption, and microlevel diffusion models that simulate adoption through interactions of individuals. Incorporating diffusion of innovation concepts complement existing methods within LCA to inform proactive environmental management of emerging technologies.

  17. Technology and work within emergency medicine

    DEFF Research Database (Denmark)

    Kristensen, Margit

    and technologies, they make use of, are most often of very diverse character.Below I describe the characteristics for the mobile and nomadic work for the two different work situations of an anaesthesiologist - in-hospital and pre-hospital - and in these descriptions I include description of which technologies...... are used and how they are used.   The paper builds on use-driven research carried out through the last 3½ years within the context of the PalCom project (PalCom). As a part of the research we have carried out extensive fieldstudies within the emergency response area, have held interviews and have had...

  18. Emergent technologies, networks that lurks the sociability

    Directory of Open Access Journals (Sweden)

    Luis Gregorio Iglesias Sahagún

    2018-05-01

    Full Text Available This paper highlights several symptoms that can be observed in multiple societies since the installation of so called “emergent technologies”, especially technologies of information and communication. Supported on the idea that this technological capacity provokes an alteration of the culture, which becomes a connectionist neo-capitalism, we suggest that besides the constriction of the “field of the possible” produced by the system of a central market economy, the appliances and technological devices – the portable ones particularly-, exerts a new constriction and, actually, re-organization, of this “field of the possible”“. We find this as disturbing signs of loss of autonomy, such as a reduction in margins for the exercise of autonomy by individuals and collectivities. We will argue that the situation becomes sophisticated in societies with a high installed capacity of communication, information and transportation technologies. In such societies, in fact, reticular forms are lavished in multiple areas: production, provision of services (shared economy, neighborhood, school, university, etc. No doubt “the network” is the metaphor that best conveys much of what happens and the ways it happens in our daily lives. Starting from a conception of sociability, understood as the form that concurrences can adopt, the form of “doing something together”, the forms of “putting something in common”, the forms of “doing about that something put in common “, we hypothesized that with emergent technologies and social reticulation, a vector of centrifugal component that blocks, hinders or inhibits sociability has also been set in motion.

  19. The Technology Review 10: Emerging Technologies that Will Change the World.

    Science.gov (United States)

    Technology Review, 2001

    2001-01-01

    Identifies 10 emerging areas of technology that will soon have a profound impact on the economy and on how people live and work: brain-machine interfaces; flexible transistors; data mining; digital rights management; biometrics; natural language processing; microphotonics; untangling code; robot design; and microfluidics. In each area, one…

  20. Analysis of University Management of Emerging Technologies and Recommendations for Developing Countries

    Science.gov (United States)

    Villa Enciso, Eliana María; Picón Jácome, Edgar; Valencia-Arias, Alejandro; Jiménez Hernández, Claudia Nelcy

    2017-01-01

    University management seeks to achieve the objectives established by higher education's institutions, including their third mission, which corresponds to the transfer of research results into the industry; in this regard, emerging technologies play an important role to solve problems identified in the industry. Emerging technologies are those…

  1. Emergent theory and technology in e-learning

    NARCIS (Netherlands)

    Browaeys, M.-J.; Wahyudi, S.

    2006-01-01

    E-learning should be approached via a new paradigm, one where instruction and information are involved in a recursive process, an approach which counters the concept of linearity. New ways of thinking about how people learn and new technologies favour the emergence of principles of e-learning that

  2. Rapid and real-time detection technologies for emerging viruses of ...

    Indian Academy of Sciences (India)

    2008-10-17

    Oct 17, 2008 ... The development of technologies with rapid and sensitive detection capabilities and increased throughput have become crucial for responding to greater number threats posed by emerging and re-emerging viruses in the recent past. The conventional identification methods require time-consuming culturing ...

  3. Scientometric methods for identifying emerging technologies

    Science.gov (United States)

    Abercrombie, Robert K; Schlicher, Bob G; Sheldon, Frederick T

    2015-11-03

    Provided is a method of generating a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain.

  4. Optical wireless communications an emerging technology

    CERN Document Server

    Capsoni, Carlo; Ghassemlooy, Zabih; Boucouvalas, Anthony; Udvary, Eszter

    2016-01-01

    This book focuses on optical wireless communications (OWC), an emerging technology with huge potential for the provision of pervasive and reliable next-generation communications networks. It shows how the development of novel and efficient wireless technologies can contribute to a range of transmission links essential for the heterogeneous networks of the future to support various communications services and traffic patterns with ever-increasing demands for higher data-transfer rates. The book starts with a chapter reviewing the OWC field, which explains different sub-technologies (visible-light, ultraviolet (UV) and infrared (IR) communications) and introduces the spectrum of application areas (indoor, vehicular, terrestrial, underwater, intersatellite, deep space, etc.). This provides readers with the necessary background information to understand the specialist material in the main body of the book, which is in four parts. The first of these deals with propagation modelling and channel characterization of ...

  5. SELENIUM TREATMENT/REMOVAL ALTERNATIVES DEMONSTRATION PROJECT - MINE WASTE TECHNOLOGY PROGRAM ACTIVITY III, PROJECT 20

    Science.gov (United States)

    This document is the final report for EPA's Mine WAste Technology Program (MWTP) Activity III, Project 20--Selenium Treatment/Removal Alternatives Demonstration project. Selenium contamination originates from many sources including mining operations, mineral processing, abandoned...

  6. Emergent technologies against the background of everyday life: Discursive psychology as a technology assessment tool

    NARCIS (Netherlands)

    Veen, M.; Gremmen, H.G.J.; Molder, te H.F.M.; Woerkum, van C.M.J.

    2011-01-01

    To understand prospective users’ reactions to emergent technologies, it is crucial to examine the interactional contexts within which these reactions take place as people’s reactions are shaped by issues that are not necessarily related to science or technology. These issues are often overshadowed

  7. Emergent technologies against the background of everyday life: Discursive psychology as a technology assessment tool.

    NARCIS (Netherlands)

    van der Veen, M.; Gremmen, B.; te Molder, Hedwig Frederica Maria; van Woerkum, C.

    2011-01-01

    To understand prospective users’ reactions to emergent technologies, it is crucial to examine the interactional contexts within which these reactions take place as people’s reactions are shaped by issues that are not necessarily related to science or technology. These issues are often overshadowed

  8. Method for Expressing Public Opinions Concerning the Introduction of an Emerging Technology to Society

    Science.gov (United States)

    Yamamoto, Satoshi; Ito, Kyoko; Ohnishi, Satoshi; Nishida, Shogo

    Emerging technology may have considerable social impact. Because emerging technology has not yet been introduced in society, it is needed general public express its opinions on emerging technology. It is important that expressing opinion must have social spirit. A method to limit facility of the Internet and activate social spirit is proposed. Evaluation experiment were conducted to test the effectiveness of the proposed method, and the participant could express opinion with social spirit.

  9. Emerging electro-optical technologies for defense applications

    Science.gov (United States)

    Venkateswarlu, Ronda; Ser, W.; Er, Meng H.; Chan, Philip

    1999-11-01

    Technological breakthroughs in the field of imaging and non- imaging sensor sand the related signal processors helped the military users to achieve 'force multiplication'. Present day 'smart-weapon systems' are being converted to 'brilliant-weapon systems' to bridge the gap until the most potent new 'fourth generation systems' come on line based on nanotechnology. The recent military tactics have evolved to take advantage of ever improving technologies to improve the quality and performance over time. The drive behind these technologies is to get a first-pass-mission-success against the target with negligible collateral damage, protecting property and the lives of non-combatants. These technologies revolve around getting target information, detection, designation, guidance, aim-point selection, and mission accomplishment. The effectiveness of these technologies is amply demonstrated during recent wars. This paper brings out the emerging trends in visible/IR/radar smart-sensors and the related signal processing technologies that lead to brilliant guided weapon systems. The purpose of this paper is to give an overview to the readers about futuristic systems. This paper also addresses various system configurations including sensor-fusion.

  10. 76 FR 76937 - Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting-Room Change

    Science.gov (United States)

    2011-12-09

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security Emerging Technology and Research Advisory Committee; Notice of Partially Closed Meeting--Room Change The Emerging Technology and Research Advisory... emerging technology and research activities, including those related to deemed exports. Agenda Wednesday...

  11. A User Centered Approach to Developing Emergent Technology Products

    DEFF Research Database (Denmark)

    Restrepo-Giraldo, John Dairo; McAloone, Timothy Charles; Schlegel, Tanja

    2008-01-01

    be used too early in the design process, given that users respond best to issues they know or can relate to. This paper presents a case study where a user-centred approach was used to determine when and how to involve users in the design of a TV-enabled mobile telephone. The aim of the study......Current participatory design methods do not allow designers to gain the insight required to develop products with emerging technologies, that is, products that do not have any precedents in the users’ knowledge base and experience. This poses challenges to the designers, as input from users cannot...... methodological issues related to user involvement in the implementation of emerging technologies in the consumer electronics industry....

  12. Providing Appropriate Technology for Emerging Markets: Case Study on China’s Solar Thermal Industry

    Directory of Open Access Journals (Sweden)

    Jianghua Zhou

    2017-01-01

    Full Text Available Building on a case study of five Chinese solar thermal companies and one association, our study aims to understand how the innovator’s choices regarding the use of technology and organizational practices for new product development enable companies to design and diffuse appropriate technology in emerging markets. The study uncovers two critical factors that enhance the appropriateness of technology: redefining the identity of technology and building a local supply system. Our analysis shows that synergic innovation in both architecture and component leads to the appropriate functionalities desired by emerging markets. Moreover, modular design and the building of a local supply system enhance the process appropriateness of technology. Our study provides an empirical basis for advocating going beyond minor adaptations of existing products to creating appropriate technology for emerging markets, and extends our understandings of the upstream process of designing appropriate technology. Moreover, the emphasis on the local supply system reflects a holistic framework for shaping and delivering appropriate technology, expanding the existing research focus on the perspective of the technology itself. Our research also has managerial implications that may help firms tap into emerging markets.

  13. Emerging Technologies: E-Textbooks, One Piece of the Puzzle

    Science.gov (United States)

    Wiese, Melanie; Du Plessis, Giselle

    2017-01-01

    The Internet has not only brought about a new technological era, but also seen the introduction of a number of emerging technologies such as e-textbooks. However, the slow acceptance of e-textbooks is an issue of concern. The objective of this study is to investigate students' perceptions and use of e-textbooks. Data was collected by using a…

  14. Emerging energy technologies impacts and policy implications

    International Nuclear Information System (INIS)

    Grubb, M.

    1992-01-01

    Technical change is a key factor in the energy world. Failure to recognize the potential for technical change, and the pace at which it may occur, has limited the accuracy and usefulness of past energy projections. conversely, programs to develop and deploy advanced energy technologies have often proved disappointing in the face of technical and commercial obstacles. This book examines important new and emerging energy technologies, and the mechanisms by which they may develop and enter the market. The project concentrates on the potential and probable role of selected energy technologies-which are in existence and likely to be of rapidly growing importance over the next decade-and the way in which market conditions and policy environment may affect their implementation

  15. Proceedings of emerging technologies for hazardous waste management

    International Nuclear Information System (INIS)

    Tedder, D.W.

    1992-01-01

    This book contains proceedings of emerging technologies for hazardous waste management. Topics covered include: Low-temperature oxidation of organic chemical wastes; Advanced waste minimization strategies; Treatment of manufactured gas plant (MGP) and similar wastes; Bioremediation of soils and sediments; Advances in radioactive waste treatment; Computer aides approaches to hazardous waste management; Advances in soil remediation; Low-temperature oxidation of organic chemical waste; Boremediation: Micro, meso, and macro-scale processes; In situ remediation techniques; Treatment of hazardous organics with radiation or solar energy; Technologies for management of municipal waste combustion residues; Environmental restoration and waste management; and Advanced separation and stabilization technologies

  16. Emerging Materials Technologies That Matter to Manufacturers

    Science.gov (United States)

    Misra, Ajay K.

    2015-01-01

    A brief overview of emerging materials technologies. Exploring the weight reduction benefit of replacing Carbon Fiber with Carbon Nanotube (CNT) in Polymer Composites. Review of the benign purification method developed for CNT sheets. The future of manufacturing will include the integration of computational material design and big data analytics, along with Nanomaterials as building blocks.

  17. Radiation technology in emerging industrial applications. Proceedings

    International Nuclear Information System (INIS)

    2003-01-01

    In many industrial applications radiation processing has proven to be a technology of choice either because of its economic competitiveness or its technical superiority. Although the chemical effects of ionizing radiation have been known for more than a century, its industrial applications became possible only after the availability of reliable gamma sources and powerful electron accelerators during the last couple of decades.The programmes of the International Atomic Energy Agency (IAEA) in radiation processing are implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Co-operation. The IAEA has been active in this field for many years, contributing to new developments, training, promotion and transfer of technology. In September 1997, the IAEA held an international symposium in Zakopane, Poland on the 'Use of radiation technology for the conservation of environment' where the status of current developments and of applications of radiation processing in the control of environmental pollution was reviewed (IAEA-TECDOC-1023, 1998). Recent developments and achievements in various aspects of radiation processing have been assessed continuously through the organization of consultants meetings, advisory group meetings and research co-ordination meetings. Worldwide growing interest in the use of radiation technology in various new industrial applications, as exemplified by the reports and presentations made at these meetings, has led the IAEA to organize a symposium to cover every aspect of radiation processing and, exclusively, the emerging industrial applications of radiation technology. The International Symposium on Radiation Technology in Emerging Industrial Applications was convened in November 2000 in Beijing, China. Its main purpose was to bring scientists,technologists, industrialists and regulatory authorities together with a view of exchanging information and reviewing the status of current developments and

  18. Radiation technology in emerging industrial applications. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-09-01

    In many industrial applications radiation processing has proven to be a technology of choice either because of its economic competitiveness or its technical superiority. Although the chemical effects of ionizing radiation have been known for more than a century, its industrial applications became possible only after the availability of reliable gamma sources and powerful electron accelerators during the last couple of decades.The programmes of the International Atomic Energy Agency (IAEA) in radiation processing are implemented through the Department of Nuclear Sciences and Applications and the Department of Technical Co-operation. The IAEA has been active in this field for many years, contributing to new developments, training, promotion and transfer of technology. In September 1997, the IAEA held an international symposium in Zakopane, Poland on the 'Use of radiation technology for the conservation of environment' where the status of current developments and of applications of radiation processing in the control of environmental pollution was reviewed (IAEA-TECDOC-1023, 1998). Recent developments and achievements in various aspects of radiation processing have been assessed continuously through the organization of consultants meetings, advisory group meetings and research co-ordination meetings. Worldwide growing interest in the use of radiation technology in various new industrial applications, as exemplified by the reports and presentations made at these meetings, has led the IAEA to organize a symposium to cover every aspect of radiation processing and, exclusively, the emerging industrial applications of radiation technology. The International Symposium on Radiation Technology in Emerging Industrial Applications was convened in November 2000 in Beijing, China. Its main purpose was to bring scientists,technologists, industrialists and regulatory authorities together with a view of exchanging information and reviewing the status of current developments and

  19. Progress in III-V materials technology

    Science.gov (United States)

    Grant, Ian R.

    2004-12-01

    Compound semiconductors, in the form of GaAs and InP have achieved major commercial significance in areas of application such as mobile communications, displays and telecoms and offer a versatility of function beyond the capabilities of Si. III-V compounds, and in particular GaAs, have since their early development been the subject of defence related interest. Support from this sector established the basic materials technologies and nurtured development up until their commercial breakthrough into consumer products. GaAs, for example, now provides essential components for mobile phones and CD / DVD players. An overview is presented of the crystal growth and processing methods used in the manufacture of these materials. Current state of the art characteristics on crystal form and quality are discussed, together with the evolution of single crystal growth techniques. Consideration is given to how these principal compounds together with the minor materials, InSb, GaSb and InAs are employed in diverse applications over a broad spectral range, together with information on markets and future perspectives.

  20. Federal/State Jurisdictional Split: Implications for Emerging Electricity Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, Jeffery S. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Kelly, Suedeen G. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Nordhaus, Robert R. [Van Ness Feldman, LLP, Washington, DC (United States); Smith, Douglas W. [Van Ness Feldman, LLP, Washington, DC (United States)

    2016-12-01

    The first Administration-wide Quadrennial Energy Review (QER), released in April 2015, found that the “interacting and overlapping” division of authority between “federal, regional and state institutions and regulatory structures” for the electricity sector could “impede development of the grid of the future [and] . . . the development of markets that efficiently integrate” new and emerging technologies.1 While “technology is indifferent to state-Federal boundaries and jurisdictions,” the QER explained, “technology users cannot be.”2 The report concluded that “[b]oth Federal and state governments need to play constructive and collaborative roles in the future to ensure that consumers and industry are able to maximize the value of new technologies.”3 The QER recommended that the Department of Energy (“DOE”) facilitate such collaboration by playing a “convening role” to bring together state and federal regulators and other stakeholders to consider these issues.4 This paper provides background and analysis on these jurisdictional issues and the impact they may have on adoption of emerging energy technologies and coordination of markets for those technologies, in support of future dialogs on these subjects. In particular, this paper reviews the structure of the Federal Power Act (“FPA”),5 and compares the division of authority between the federal and state governments adopted there with other federal energy and energy-related statutes.

  1. The emergence of new technology-based industries: the case of fuel cells and its technological relatedness to regional knowledge bases

    DEFF Research Database (Denmark)

    Tanner, Anne Nygaard

    2016-01-01

    to emerging radical technologies that create the foundation for new industries. The article develops a new measure for technological relatedness between the knowledge base of a region and that of a radical technology based on patent classes. It demonstrates that emerging fuel cell technology develops where...... the regional knowledge base is technologically related to that of fuel cells and consequently confirms the evolutionary thesis.......Evolutionary economic geographers propose that regional diversification is a path-dependent process whereby industries grow out of pre-existing industrial structures through technologically related localised knowledge spillovers and learning. This article examines whether this also applies...

  2. Internationalization of high-technology ventures from emerging economies

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    This paper aims to contribute towards filling in the gap in the international entrepreneurhsip literature by exploring how and why new high-technology ventures internationalize from an emerging economy, namely Moldova. To address the above research questions, a multiple-case study strategy...

  3. Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

    International Nuclear Information System (INIS)

    Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P.

    2010-01-01

    This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

  4. Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P. [Ecole Polytechnique, Montreal, PQ (Canada). Dept. de Genie Chimique. Design Engineering Chair in Process Integration

    2010-05-15

    This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

  5. Engagement and Uncertainty: Emerging Technologies Challenge the Work of Engagement

    Science.gov (United States)

    Eaton, Weston; Wright, Wynne; Whyte, Kyle; Gasteyer, Stephen P.; Gehrke, Pat J.

    2014-01-01

    Universities' increasing applications of science and technology to address a wide array of societal problems may serve to thwart democratic engagement strategies. For emerging technologies, such challenges are particularly salient, as knowledge is incomplete and application and impact are uncertain or contested. Insights from science and…

  6. Computer technologies for industrial risk prevention and emergency management

    International Nuclear Information System (INIS)

    Balduccelli, C.; Bologna, S.; Di Costanzo, G.; Vicoli, G.

    1996-07-01

    This document provides an overview about problems related to the engineering of computer based systems for industrial risk prevention and emergency management. Such systems are rather complex and subject to precise reliability and safety requirements. With the evolution of informatic technologies, such systems are becoming to be the means for building protective barriers for reduction of risk associated with plant operations. For giving more generality to this document, and for not concentrating on only a specific plant, the emergency management systems will be dealt with more details than ones for accident prevention. The document is organized in six chapters. Chapter one is an introduction to the problem and to its state of art, with particular emphasis to the aspects of safety requirements definition. Chapter two is an introduction to the problems related to the emergency management and to the training of operators in charge of this task. Chapter three deals in details the topic of the Training Support Systems, in particular about MUSTER (multi-user system for training and evaluation of environmental emergency response) system. Chapter four deals in details the topic of decision support systems, in particular about ISEM (information technology support for emergency management) system. Chapter five illustrates an application of support to the operators of Civil Protection Department for the management of emergencies in the fields of industrial chemical. Chapter six is about a synthesis of the state of art and the future possibilities, identifying some research and development activities more promising for the future

  7. THE EMERGING TECHNOLOGICAL TRENDS IN THE TOURISM INDUSTRY

    Directory of Open Access Journals (Sweden)

    MANOLIU ANDREEA

    2014-05-01

    Full Text Available The importance of information and communications technologies for the economic development is widely recognized, given the impact that technology can have on the success, survival or failure of the economic activity of companies, especially in an environment of global competition. The information technology and connectivity are reconfiguring the tourism industry by offering travel providers and consumers the opportunities to interact in the creation of tourism products, seeking availabilities, prices, searching information about tourism destinations.!In the tourism industry, suppliers are being forced to become more competitive if they want to survive and develop in a new business environment; they have to exploit the potential of emerging technologies. Such potential is clearly demonstrated by online auctioning applications, opaque inventory rates and social commerce.

  8. Emerging technologies and corporate culture at Microsoft: a methodological note.

    Science.gov (United States)

    Klein, David; Schmeling, James; Blanck, Peter

    2005-01-01

    This article explores factors important in the study and examination of corporate culture and change. The particular focus is on the technological methods used to conduct a study of accessible technology and corporate culture at Microsoft Corporation. Reasons for particular approaches are explained. Advantages and challenges of emerging technologies that store and retrieve information in the study of corporate culture are reviewed. 2005 John Wiley & Sons, Ltd.

  9. EPA activities related to emerging air sensor technology

    Science.gov (United States)

    This slide set was developed through contributions of NERL and NRMRL research groups and organized to explain the diversity of ongoing research related to emerging air sensor technology for an international audience. Gayle will be walking OAQPS through the slide set in advance o...

  10. The emergence of information and communication technologies in ...

    African Journals Online (AJOL)

    The emergence of information and communication technologies in Africa: challenges and opportunities. SA Igbatayo, SO Igbinedion. Abstract. No Abstract. Nigeria Journal of Business Administration Vol. 6(1) 2004: 17-33. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  11. Technology transfer package on seismic base isolation - Volume III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-14

    This Technology Transfer Package provides some detailed information for the U.S. Department of Energy (DOE) and its contractors about seismic base isolation. Intended users of this three-volume package are DOE Design and Safety Engineers as well as DOE Facility Managers who are responsible for reducing the effects of natural phenomena hazards (NPH), specifically earthquakes, on their facilities. The package was developed as part of DOE's efforts to study and implement techniques for protecting lives and property from the effects of natural phenomena and to support the International Decade for Natural Disaster Reduction. Volume III contains supporting materials not included in Volumes I and II.

  12. A Survey of Wireless Indoor Positioning Technology for Fire Emergency Routing

    International Nuclear Information System (INIS)

    Niu, Lei

    2014-01-01

    Fire emergency response needs positioning solutions to assist evacuation and rescue operations. Therefore, we have to carefully review the candidates for this purpose. These indoor positioning technologies show different levels of applicability in fire emergency response. According to the varying demands of emergency response, flexible localization solutions should be provided. Thus, we guide a first step to implement this concept in three pre-defined emergency scenes. At last, we conclude several key features for indoor positioning solutions for emergency routing and three future research topics

  13. Emerging Technologies and Outreach with JWST

    Science.gov (United States)

    Green, Joel D.; Smith, Denise A.; Meinke, Bonnie K.; Lawton, Brandon L.; Kenney, Jessica; Jirdeh, Hussein

    2017-06-01

    The James Webb Space Telescope (JWST), NASA’s next great observatory launching in October 2018, required a dozen new technologies to develop. How will we maintain the prestige and cultural impact of Hubble as the torch passes to Webb? Emerging technologies such as augmented and virtual reality bring the viewer into the data and the concept in previously unimaginable immersive detail. Adoption of mobile devices has expanded access to information for wide swaths of the public. Software like Worldwide Telescope to hardware like the Occulus Rift are providing new avenues for learning. If we develop materials properly tailored to this medium, we can reach more diverse audiences than ever before. STScI is pioneering some tools related to JWST for showcasing at AAS, and in local events, which I highlight here.

  14. Emerging technologies in engineering education: can we make it work?

    NARCIS (Netherlands)

    Klaassen, R.G.; de Vries, P.; Kamp, A.

    2017-01-01

    This paper deals with an explorative research into the use of emerging technologies for teaching and learning. An important stimulus for this research is the skills gap. The rapid changing demand puts a lot of pressure on education and the promise is that technology might help to solve the problem.

  15. Integration of multi-technology on oil spill emergency preparedness.

    Science.gov (United States)

    Liao, Zhenliang; Hannam, Phillip M; Xia, Xiaowei; Zhao, Tingting

    2012-10-01

    This paper focuses on the integration of technologies including Case-Based Reasoning (CBR), Genetic Algorithm (GA) and Artificial Neural Network (ANN) for establishing emergency preparedness for oil spill accidents. In CBR, the Frame method is used to define case representation, and the HEOM (Heterogeneous Euclidean-Overlap Metric) is improved to define the similarity of case properties. In GA, we introduce an Improved Genetic Algorithm (IGA) that achieves case adaptation, in which technologies include the Multi-Parameter Cascade Code method, the Small Section method for generation of an initial population, the Multi-Factor Integrated Fitness Function, and Niche technology for genetic operations including selection, crossover, and mutation. In ANN, a modified back-propagation algorithm is employed to train the algorithm to quickly improve system preparedness. Through the analysis of 32 fabricated oil spill cases, an oil spill emergency preparedness system based on the integration of CBR, GA and ANN is introduced. In particular, the development of ANN is presented and analyzed. The paper also discusses the efficacy of our integration approach. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. The Emerging Technology of Avatars: Some Educational Considerations

    Science.gov (United States)

    Blake, Anne M.; Moseley, James L.

    2010-01-01

    Avatars are gaining popularity as an emerging technology to facilitate learning and instruction. Avatars can be used as agents of e-learning applications or as part of immersive learning environments such as Second Life. Research indicates that avatar use has numerous potential benefits, including increased student engagement and opportunities for…

  17. Technological considerations in emergency instrument preparedness

    International Nuclear Information System (INIS)

    Selby, J.M.

    1976-01-01

    Emergency preparedness has been emphasized during the development of the nuclear industry. Existing instrumentation technology has been effectively applied to minimizing the probability of accidents. Radiological instrumentation provided for the measurement of ambient radiation levels or routine releases of radioactive material is usually adequate to provide an early warning that an accident is occurring. In contrast, radiological instrumentation capable of providing a reasonable measure of the source term which could be involved in a severe accident has not received enough attention. In emergency planning the capability should be established for identifying as promptly as possible the need for evasive action out in the plant environs and for minimizing the consequences of an accident in terms of resultant human exposure. Therefore instrumentation is required to measure the source term no matter where the point of release might be, together with instrumentation for obtaining meteorological data sufficient to establish the path of the release in the environment

  18. Channeling the Innovation Stream: A Decision Framework for Selecting Emerging Technologies

    Science.gov (United States)

    Sauer, Philip S.

    2010-01-01

    The proliferation of emerging technologies offers opportunity but also presents challenges to defense acquisition decision makers seeking to incorporate those technologies as part of the acquisition process. Assessment frameworks and methodologies found in the literature typically address the primary focus of a sponsoring organization's interest…

  19. Organic electronics emerging concepts and technologies

    CERN Document Server

    Santato, Clara

    2013-01-01

    An overview of the tremendous potential of organic electronics, concentrating on those emerging topics and technologies that will form the focus of research over the next five to ten years. The young and energetic team of editors with an excellent research track record has brought together internationally renowned authors to review up-and-coming topics, some for the first time, such as organic spintronics, iontronics, light emitting transistors, organic sensors and advanced structural analysis. As a result, this book serves the needs of experienced researchers in organic electronics, graduate

  20. TechIP: A Methodology for Emerging Information Technology Insertion & Integration

    National Research Council Canada - National Science Library

    Patel, Has

    2004-01-01

    ...) processing and software agents. To implement these requirements, the system designers are required to insert, integrate and manage proven advances in Emerging Information Technology (EIT) in to the...

  1. A Survey of the Rapidly Emerging Field of Nanotechnology: Potential Applications for Scientific Instruments and Technologies for Atmospheric Entry Probes

    Science.gov (United States)

    Meyyappan, M.; Arnold, J. O.

    2005-01-01

    The field of Nanotechnology is well funded worldwide and innovations applicable to Solar System Exploration are emerging much more rapidly than thought possible just a few years ago. This presentation will survey recent innovations from nanotechnololgy with a focus on novel applications to atmospheric entry science and probe technology, in a fashion similar to that presented by Arnold and Venkatapathy at the previous workshop forum at Lisbon Portugal, October 6-9, 2003. Nanotechnology is a rapidly emerging field that builds systems, devices and materials from the bottom up, atom by atom, and in so doing provides them with novel and remarkable macro-scale performance. This technology has the potential to revolutionize space exploration by reducing mass and simultaneously increasing capability. Thermal, Radiation, Impact Protective Shields: Atmospheric probes and humans on long duration deep space missions involved in Solar System Exploration must safely endure 3 significant hazards: (i) atmospheric entry; (ii) radiation; and (iii) micrometeorite or debris impact. Nanostructured materials could be developed to address all three hazards with a single protective shield, which would involve much less mass than a traditional approach. The concept can be ready in time for incorporation into NASA s Crew Exploration Vehicle, and possible entry probes to fly on the Jupiter Icy Moons

  2. Anticipating the Future, Influencing the Present: Assessing the Societal Implications of Emerging Technologies

    Science.gov (United States)

    Michelson, Evan S.

    A growing challenge for the American policymaking system is to respond effectively to a wide range of interconnected, complex, long-term science and technology issues. Simultaneously, current approaches and institutions of governance are ill suited to address these multidimensional challenges. As the next generation of innovations in science and technology is arriving at an accelerating rate, the governance system is lagging behind. This realization leads to a vital overarching consideration that steers this study: What approaches are well suited to anticipate the longer-term societal implications of emerging technologies in the 21st Century? This study identifies and examines strategies for anticipating the longer-term societal implications of emerging technologies by way of a qualitative case study. It explores one area of technology (nanotechnology), in one particular governance system (the United States), and with a focus on one high profile non-governmental organization (NGO) involved in addressing a range of nanotechnology's societal and policy implications: the Project on Emerging Nanotechnologies (PEN). Based at the Woodrow Wilson International Center for Scholars, PEN's goal was to ensure "that as nanotechnologies advance, possible risks are minimized, public and consumer engagement remains strong, and the potential benefits of these new technologies are realized." The conceptual framework of anticipatory governance guides the research, which offers a real-world example about how anticipatory governance applies in the nongovernmental sector and shows how this idea links to broader theoretical debates about the policymaking process. The study's main conclusion is that PEN utilized a set of interconnected strategies related to advancing foresight, operating in a boundary-spanning role, and promoting communications and public engagement in its attempt to influence, anticipate, and shape the societal implications of emerging technologies. The findings are

  3. High-Throughput Multiple Dies-to-Wafer Bonding Technology and III/V-on-Si Hybrid Lasers for Heterogeneous Integration of Optoelectronic Integrated Circuits

    Directory of Open Access Journals (Sweden)

    Xianshu eLuo

    2015-04-01

    Full Text Available Integrated optical light source on silicon is one of the key building blocks for optical interconnect technology. Great research efforts have been devoting worldwide to explore various approaches to integrate optical light source onto the silicon substrate. The achievements so far include the successful demonstration of III/V-on-Si hybrid lasers through III/V-gain material to silicon wafer bonding technology. However, for potential large-scale integration, leveraging on mature silicon complementary metal oxide semiconductor (CMOS fabrication technology and infrastructure, more effective bonding scheme with high bonding yield is in great demand considering manufacturing needs. In this paper, we propose and demonstrate a high-throughput multiple dies-to-wafer (D2W bonding technology which is then applied for the demonstration of hybrid silicon lasers. By temporarily bonding III/V dies to a handle silicon wafer for simultaneous batch processing, it is expected to bond unlimited III/V dies to silicon device wafer with high yield. As proof-of-concept, more than 100 III/V dies bonding to 200 mm silicon wafer is demonstrated. The high performance of the bonding interface is examined with various characterization techniques. Repeatable demonstrations of 16-III/V-die bonding to pre-patterned 200 mm silicon wafers have been performed for various hybrid silicon lasers, in which device library including Fabry-Perot (FP laser, lateral-coupled distributed feedback (LC-DFB laser with side wall grating, and mode-locked laser (MLL. From these results, the presented multiple D2W bonding technology can be a key enabler towards the large-scale heterogeneous integration of optoelectronic integrated circuits (H-OEIC.

  4. Emerging Technologies: How Do We Know What's Happening "on the Ground"?

    Science.gov (United States)

    Evans, Gwen

    2012-01-01

    Libraries have incorporated all kinds of emerging or recently emerged technologies such as social media, mobile apps, e-books, and tablets into their services with differing levels of resource commitment and with vastly different timescales. Some libraries adopt a measured, policy-driven approach, spending a year or more on research, assessment,…

  5. International legal framework for geoengineering: Managing the risks of an emerging technology

    NARCIS (Netherlands)

    Du, Haomiao

    2016-01-01

    The present book “International Legal Framework for Geoengineering – Managing the Risks of an Emerging Technology” is about international law and an emerging technology called geoengineering, which refers to the large-scale manipulation of the planetary environment for counteracting anthropogenic

  6. Cubesats: Cost-effective science and technology platforms for emerging and developing nations

    Science.gov (United States)

    Woellert, Kirk; Ehrenfreund, Pascale; Ricco, Antonio J.; Hertzfeld, Henry

    2011-02-01

    The development, operation, and analysis of data from cubesats can promote science education and spur technology utilization in emerging and developing nations. This platform offers uniquely low construction and launch costs together with a comparative ubiquity of launch providers; factors that have led more than 80 universities and several emerging nations to develop programs in this field. Their small size and weight enables cubesats to “piggyback” on rocket launches and accompany orbiters travelling to Moon and Mars. It is envisaged that constellations of cubesats will be used for larger science missions. We present a brief history, technology overview, and summary of applications in science and industry for these small satellites. Cubesat technical success stories are offered along with a summary of pitfalls and challenges encountered in both developed and emerging nations. A discussion of economic and public policy issues aims to facilitate the decision-making process for those considering utilization of this unique technology.

  7. Nanotechnology in a Globalized World: Strategic Assessments of an Emerging Technology

    Science.gov (United States)

    2014-06-01

    coverage of domestic mainstream media on new and emerging technology: in the case of GMO and Nanotechnology (in Chinese)," 5th Chinese Science and...case of GMO and Nanotechnology (in Chinese)." 5th Chinese Science and Technology Policy and Management Annual Conference. Feder, Barnaby J. 2003

  8. Analogical reasoning in handling emerging technologies: the case of umbilical cord blood biobanking.

    Science.gov (United States)

    Hofmann, Bjørn; Solbakk, Jan Helge; Holm, Søren

    2006-01-01

    How are we individually and as a society to handle new and emerging technologies? This challenging question underlies much of the bioethical debates of modern times. To address this question we need suitable conceptions of the new technology and ways of identifying its proper management and regulation. To establish conceptions and to find ways to handle emerging technologies we tend to use analogies extensively. The aim of this article is to investigate the role that analogies play or may play in the processes of understanding and managing new technology. More precisely we aim to unveil the role of analogies as analytical devices in exploring the "being" of the new technology as well the normative function of analogies in conceptualizing the characteristics and applications of new technology. Umbilical cord blood biobanking will be used as a case to investigate these roles and functions.

  9. Risk Perception of an Emergent Technology: The Case of Hydrogen Energy

    Directory of Open Access Journals (Sweden)

    Rob Flynn

    2006-01-01

    Full Text Available Although hydrogen has been used in industry for many years as a chemical commodity, its use as a fuel or energy carrier is relatively new and expert knowledge about its associated risks is neither complete nor consensual. Public awareness of hydrogen energy and attitudes towards a future hydrogen economy are yet to be systematically investigated. This paper opens by discussing alternative conceptualisations of risk, then focuses on issues surrounding the use of emerging technologies based on hydrogen energy. It summarises expert assessments of risks associated with hydrogen. It goes on to review debates about public perceptions of risk, and in doing so makes comparisons with public perceptions of other emergent technologies—Carbon Capture and Storage (CCS, Genetically Modified Organisms and Food (GM and Nanotechnology (NT—for which there is considerable scientific uncertainty and relatively little public awareness. The paper finally examines arguments about public engagement and "upstream" consultation in the development of new technologies. It is argued that scientific and technological uncertainties are perceived in varying ways and different stakeholders and different publics focus on different aspects or types of risk. Attempting to move public consultation further "upstream" may not avoid this, because the framing of risks and benefits is necessarily embedded in a cultural and ideological context, and is subject to change as experience of the emergent technology unfolds. URN: urn:nbn:de:0114-fqs0601194

  10. Electric energy storage systems in a market-based economy. Comparison of emerging and traditional technologies

    International Nuclear Information System (INIS)

    Kazempour, S. Jalal; Moghaddam, M. Parsa; Haghifam, M.R.; Yousefi, G.R.

    2009-01-01

    Unlike markets for storable commodities, electricity markets depend on the real-time balance of supply and demand. Although much of the present-day grid operate effectively without storage technologies, cost-effective ways of storing electrical energy can make the grid more efficient and reliable. This work addresses an economic comparison between emerging and traditional Electric Energy Storage (EES) technologies in a competitive electricity market. In order to achieve this goal, an appropriate Self-Scheduling (SS) approach must first be developed for each of them to determine their maximum potential of expected profit among multi-markets such as energy and ancillary service markets. Then, these technologies are economically analyzed using Internal Rate of Return (IRR) index. Finally, the amounts of needed financial supports are determined for choosing the emerging technologies when an investor would like to invest on EES technologies. Among available EES technologies, we consider NaS battery (Natrium Sulfur battery) and pumped-storage plants as emerging and traditional technologies, respectively. (author)

  11. Explicit and implicit attitude toward an emerging food technology

    NARCIS (Netherlands)

    Bekker, Gerben A.; Fischer, Arnout R.H.; Tobi, Hilde; Trijp, van Hans C.M.

    2017-01-01

    Cultured meat is an unfamiliar emerging food technology that could provide a near endless supply of high quality protein with a relatively small ecological footprint. To understand consumer acceptance of cultured meat, this study investigated the influence of information provision on the explicit

  12. Development of Rural Emergency Medical System (REMS) with Geospatial Technology in Malaysia

    Science.gov (United States)

    Ooi, W. H.; Shahrizal, I. M.; Noordin, A.; Nurulain, M. I.; Norhan, M. Y.

    2014-02-01

    Emergency medical services are dedicated services in providing out-of-hospital transport to definitive care or patients with illnesses and injuries. In this service the response time and the preparedness of medical services is of prime importance. The application of space and geospatial technology such as satellite navigation system and Geographical Information System (GIS) was proven to improve the emergency operation in many developed countries. In collaboration with a medical service NGO, the National Space Agency (ANGKASA) has developed a prototype Rural Emergency Medical System (REMS), focusing on providing medical services to rural areas and incorporating satellite based tracking module integrated with GIS and patience database to improve the response time of the paramedic team during emergency. With the aim to benefit the grassroots community by exploiting space technology, the project was able to prove the system concept which will be addressed in this paper.

  13. Laser-induced breakdown spectroscopy - An emerging chemical sensor technology for real-time field-portable, geochemical, mineralogical, and environmental applications

    International Nuclear Information System (INIS)

    Harmon, Russell S.; DeLucia, Frank C.; McManus, Catherine E.; McMillan, Nancy J.; Jenkins, Thomas F.; Walsh, Marianne E.; Miziolek, Andrzej

    2006-01-01

    Laser induced breakdown spectroscopy (LIBS) is a simple spark spectrochemical sensor technology in which a laser beam is directed at a sample surface to create a high-temperature microplasma and a detector used to collect the spectrum of light emission and record its intensity at specific wavelengths. LIBS is an emerging chemical sensor technology undergoing rapid advancement in instrumentation capability and in areas of application. Attributes of a LIBS sensor system include: (i) small size and weight; (ii) technologically mature, inherently rugged, and affordable components; (iii) real-time response; (iv) in situ analysis with no sample preparation required; (v) a high sensitivity to low atomic weight elements which are difficult to determine by other field-portable sensor techniques, and (vi) point sensing or standoff detection. Recent developments in broadband LIBS provide the capability for detection at very high resolution (0.1 nm) of all elements in any unknown target material because all chemical elements emit in the 200-980 nm spectral region. This progress portends a unique potential for the development of a rugged and reliable field-portable chemical sensor that has the potential to be utilized in variety of geochemical, mineralogical, and environmental applications

  14. Contaminated concrete: Occurrence and emerging technologies for DOE decontamination

    International Nuclear Information System (INIS)

    Dickerson, K.S.; Wilson-Nichols, M.J.; Morris, M.I.

    1995-08-01

    The goals of the Facility Deactivation, Decommissioning, and Material Disposition Focus Area, sponsored by the US Department of Energy (DOE) Office of Technology Development, are to select, demonstrate, test, and evaluate an integrated set of technologies tailored to provide a complete solution to specific problems posed by deactivation, decontamination, and decommissioning, (D ampersand D). In response to these goals, technical task plan (TTP) OR152002, entitled Accelerated Testing of Concrete Decontamination Methods, was submitted by Oak Ridge National Laboratory. This report describes the results from the initial project tasks, which focused on the nature and extent of contaminated concrete, emerging candidate technologies, and matching of emerging technologies to concrete problems. Existing information was used to describe the nature and extent of contamination (technology logic diagrams, data bases, and the open literature). To supplement this information, personnel at various DOE sites were interviewed, providing a broad perspective of concrete contamination. Because characterization is in the initial stage at many sites, complete information is not available. Assimilation of available information into one location is helpful in identifying potential areas of concern in the future. The most frequently occurring radiological contaminants within the DOE complex are 137 Cs, 238 U (and it daughters), and 60 Co, followed closely by 90 Sr and tritium, which account for -30% of the total occurrence. Twenty-four percent of the contaminants were listed as unknown, indicating a lack of characterization information, and 24% were listed as other contaminants (over 100 isotopes) with less than 1% occurrence per isotope

  15. Contaminated concrete: Occurrence and emerging technologies for DOE decontamination

    Energy Technology Data Exchange (ETDEWEB)

    Dickerson, K.S.; Wilson-Nichols, M.J. [Oak Ridge National Lab., Grand Junction, CO (United States); Morris, M.I. [Oak Ridge National Lab., TN (United States)

    1995-08-01

    The goals of the Facility Deactivation, Decommissioning, and Material Disposition Focus Area, sponsored by the US Department of Energy (DOE) Office of Technology Development, are to select, demonstrate, test, and evaluate an integrated set of technologies tailored to provide a complete solution to specific problems posed by deactivation, decontamination, and decommissioning, (D&D). In response to these goals, technical task plan (TTP) OR152002, entitled Accelerated Testing of Concrete Decontamination Methods, was submitted by Oak Ridge National Laboratory. This report describes the results from the initial project tasks, which focused on the nature and extent of contaminated concrete, emerging candidate technologies, and matching of emerging technologies to concrete problems. Existing information was used to describe the nature and extent of contamination (technology logic diagrams, data bases, and the open literature). To supplement this information, personnel at various DOE sites were interviewed, providing a broad perspective of concrete contamination. Because characterization is in the initial stage at many sites, complete information is not available. Assimilation of available information into one location is helpful in identifying potential areas of concern in the future. The most frequently occurring radiological contaminants within the DOE complex are {sup 137}Cs, {sup 238}U (and it daughters), and {sup 60}Co, followed closely by {sup 90}Sr and tritium, which account for {minus}30% of the total occurrence. Twenty-four percent of the contaminants were listed as unknown, indicating a lack of characterization information, and 24% were listed as other contaminants (over 100 isotopes) with less than 1% occurrence per isotope.

  16. [The characteristics of medical technologies in emergency medical care hospital].

    Science.gov (United States)

    Murakhovskiĭ, A G; Babenko, A I; Bravve, Iu I; Tataurova, E A

    2013-01-01

    The article analyzes the implementation of major 12 diagnostic and 17 treatment technologies applied during medical care of patients with 12 key nosology forms of diseases in departments of the emergency medical care hospital No 2 of Omsk. It is established that key groups of technologies in the implementation of diagnostic process are the laboratory clinical diagnostic analyses and common diagnostic activities at reception into hospital and corresponding departments. The percentage of this kind of activities is about 78.3% of all diagnostic technologies. During the realization of treatment process the priority technologies are common curative and rehabilitation activities, intensive therapy activities and clinical diagnostic monitoring activities. All of them consist 80.1% of all curative technologies.

  17. Plant genetic resources for food and agriculture: opportunities and challenges emerging from the science and information technology revolution.

    Science.gov (United States)

    Halewood, Michael; Chiurugwi, Tinashe; Sackville Hamilton, Ruaraidh; Kurtz, Brad; Marden, Emily; Welch, Eric; Michiels, Frank; Mozafari, Javad; Sabran, Muhamad; Patron, Nicola; Kersey, Paul; Bastow, Ruth; Dorius, Shawn; Dias, Sonia; McCouch, Susan; Powell, Wayne

    2018-03-01

    Contents Summary 1407 I. Introduction 1408 II. Technological advances and their utility for gene banks and breeding, and longer-term contributions to SDGs 1408 III. The challenges that must be overcome to realise emerging R&D opportunities 1410 IV. Renewed governance structures for PGR (and related big data) 1413 V. Access and benefit sharing and big data 1416 VI. Conclusion 1417 Acknowledgements 1417 ORCID 1417 References 1417 SUMMARY: Over the last decade, there has been an ongoing revolution in the exploration, manipulation and synthesis of biological systems, through the development of new technologies that generate, analyse and exploit big data. Users of Plant Genetic Resources (PGR) can potentially leverage these capacities to significantly increase the efficiency and effectiveness of their efforts to conserve, discover and utilise novel qualities in PGR, and help achieve the Sustainable Development Goals (SDGs). This review advances the discussion on these emerging opportunities and discusses how taking advantage of them will require data integration and synthesis across disciplinary, organisational and international boundaries, and the formation of multi-disciplinary, international partnerships. We explore some of the institutional and policy challenges that these efforts will face, particularly how these new technologies may influence the structure and role of research for sustainable development, ownership of resources, and access and benefit sharing. We discuss potential responses to political and institutional challenges, ranging from options for enhanced structure and governance of research discovery platforms to internationally brokered benefit-sharing agreements, and identify a set of broad principles that could guide the global community as it seeks or considers solutions. © 2018 The Authors. New Phytologist © 2018 New Phytologist Trust.

  18. Experience Scaling Up Manufacturing of Emerging Photovoltaic Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Braun, G. W.; Skinner, D. E.

    2007-01-01

    This report examines two important generic photovoltaic technologies at particularly revealing stages of development, i.e., the stages between R&D and stable commercial production and profitable sales. Based on two historical cases, it attempts to shed light on the difference between: (1) costs and schedules validated by actual manufacturing and market experience, and (2) estimated costs and schedules that rely on technology forecasts and engineering estimates. The amorphous Silicon case also identifies some of the costs that are incurred in meeting specific market requirements, while the Cadmium Telluride case identifies many of the operational challenges involved in transferring R&D results to production. The transition between R&D and commercial success takes a great deal of time and money for emerging energy conversion technologies in general. The experience reported here can be instructive to those managing comparable efforts, and to their investors. It can also be instructive to R&D managers responsible for positioning such new technologies for commercial success.

  19. Strategies for Integrating Emerging Technologies: Case Study of an Online Educational Technology Master's Program

    Science.gov (United States)

    Czerkawski, Betul C.

    2013-01-01

    Emerging technologies do not necessarily facilitate or advance learning processes; teaching strategies that are used in the learning process, integration and incorporation methods do. In online instruction, research shows that "effective distance education depends on the provision of pedagogical excellence" (Bernard et al., 2004, p.413).…

  20. General framework and key technologies of national nuclear emergency system

    International Nuclear Information System (INIS)

    Yuan Feng; Li Xudong; Zhu Guangying; Song Yafeng; Zeng Suotian; Shen Lifeng

    2014-01-01

    Nuclear emergency is the important safeguard for the sustainable development of nuclear energy, and is the significant part of national public crisis management. The paper gives the definition of nuclear emergency system explicitly based on the analysis of the characteristics of the nuclear emergency, and through the research of the structure and general framework, the general framework of the national nuclear emergency management system (NNEMS) is obtained, which is constructed in four parts, including one integrative platform, six layers, eight applications and two systems, then the paper indicate that the architecture of national emergency system that should be laid out by three-tiers, i.e. national, provincial and organizations with nuclear facilities, and also describe the functions of the NNEMS on the nuclear emergency's workflow. Finally, the paper discuss the key technology that NNIEMS needed, such as WebGIS, auxiliary decision-making, digitalized preplan and the conformity and usage of resources, and analyze the technical principle in details. (authors)

  1. Designing technology for emergent literacy: the PictoPal initiative

    NARCIS (Netherlands)

    McKenney, Susan; Voogt, Joke

    2009-01-01

    PictoPal is the name of a technology-supported intervention designed to foster the development of emergent reading and writing skills in four and five year old children. Following the theoretical underpinnings and a brief description of PictoPal, this article describes how children worked with the

  2. Science and Emerging Technology of 2D Atomic Layered Materials and Devices

    Science.gov (United States)

    2017-09-09

    AFRL-AFOSR-JP-TR-2017-0067 Science & Emerging Technology of 2D Atomic Layered Materials and Devices Angel Rubio UNIVERSIDAD DEL PAIS VASCO - EUSKAL...DD-MM-YYYY)      27-09-2017 2.  REPORT TYPE      Final 3.  DATES COVERED (From - To)      19 Feb 2015 to 18 Feb 2017 4.  TITLE AND SUBTITLE Science ...reporting documents for AOARD project 144088, “2D Materials and Devices Beyond Graphene Science & Emerging Technology of 2D Atomic Layered Materials and

  3. Proceedings of DAE-BRNS biennial symposium on emerging trends in separation science and technology

    International Nuclear Information System (INIS)

    Pathak, P.N.; Mohapatra, P.K.; Goswami, A.

    2012-01-01

    The symposium on emerging trends in separation science and technology was held during 27 February -1 March, 2012. An attempt has been made to cover a wide range of topics in the symposium including design and synthesis of solvents/resins, development of separation equipment's, separation the nuclear fuel cycle, emerging separation technologies, electrochemical and pyrochemical separations, treatment of industrial effluents, isotope separations, membrane science and technology, radiochemical separations, water treatment and recycling, bioremediation and speciation. Papers relevant to INIS are indexed separately

  4. The climate change implications of manufacturing refrigerants. A calculation of 'production' energy contents of some common refrigerants

    International Nuclear Information System (INIS)

    Campbell, N.J.; McCulloch, A.

    1998-01-01

    Total Equivalent Warming Impact (TEWI) analysis has been shown to be a useful aid to quantifying the climate change effect of potential emissions from the operation of systems that involve the use of greenhouse gases and consume energy, so generating CO 2 emissions. It enables these systems to be optimized for minimum global warming impact. In previous studies, the energies required to manufacture the greenhouse gases themselves were not included; by analogy with other chemical manufacturing processes they were assumed to be small in the context of climate change. In the work described here, climate change impacts from the energy used to produce a number of common refrigerant fluids are evaluated. These impacts are compared with the potential impact on global warming from the other components of TEWI: use and disposal of the refrigerants, including direct release into the environment. It is shown that the implications for climate change of the production of traditional refrigerants like ammonia, hydrocarbons or CFC-12 and new refrigerating fluids, such as HFC-134a, are truly insignificant in comparison with other stages of the life cycle of a refrigerator and have no role in TEWI. (author)

  5. Characterizing emerging industrial technologies in energy models

    Energy Technology Data Exchange (ETDEWEB)

    Laitner, John A. (Skip); Worrell, Ernst; Galitsky, Christina; Hanson, Donald A.

    2003-07-29

    Conservation supply curves are a common tool in economic analysis. As such, they provide an important opportunity to include a non-linear representation of technology and technological change in economy-wide models. Because supply curves are closely related to production isoquants, we explore the possibility of using bottom-up technology assessments to inform top-down representations of energy models of the U.S. economy. Based on a recent report by LBNL and ACEEE on emerging industrial technologies within the United States, we have constructed a supply curve for 54 such technologies for the year 2015. Each of the selected technologies has been assessed with respect to energy efficiency characteristics, likely energy savings by 2015, economics, and environmental performance, as well as needs for further development or implementation of the technology. The technical potential for primary energy savings of the 54 identified technologies is equal to 3.54 Quads, or 8.4 percent of the assume d2015 industrial energy consumption. Based on the supply curve, assuming a discount rate of 15 percent and 2015 prices as forecasted in the Annual Energy Outlook2002, we estimate the economic potential to be 2.66 Quads - or 6.3 percent of the assumed forecast consumption for 2015. In addition, we further estimate how much these industrial technologies might contribute to standard reference case projections, and how much additional energy savings might be available assuming a different mix of policies and incentives. Finally, we review the prospects for integrating the findings of this and similar studies into standard economic models. Although further work needs to be completed to provide the necessary link between supply curves and production isoquants, it is hoped that this link will be a useful starting point for discussion with developers of energy-economic models.

  6. Review of emerging surgical robotic technology.

    Science.gov (United States)

    Peters, Brian S; Armijo, Priscila R; Krause, Crystal; Choudhury, Songita A; Oleynikov, Dmitry

    2018-04-01

    The use of laparoscopic and robotic procedures has increased in general surgery. Minimally invasive robotic surgery has made tremendous progress in a relatively short period of time, realizing improvements for both the patient and surgeon. This has led to an increase in the use and development of robotic devices and platforms for general surgery. The purpose of this review is to explore current and emerging surgical robotic technologies in a growing and dynamic environment of research and development. This review explores medical and surgical robotic endoscopic surgery and peripheral technologies currently available or in development. The devices discussed here are specific to general surgery, including laparoscopy, colonoscopy, esophagogastroduodenoscopy, and thoracoscopy. Benefits and limitations of each technology were identified and applicable future directions were described. A number of FDA-approved devices and platforms for robotic surgery were reviewed, including the da Vinci Surgical System, Sensei X Robotic Catheter System, FreeHand 1.2, invendoscopy E200 system, Flex® Robotic System, Senhance, ARES, the Single-Port Instrument Delivery Extended Research (SPIDER), and the NeoGuide Colonoscope. Additionally, platforms were reviewed which have not yet obtained FDA approval including MiroSurge, ViaCath System, SPORT™ Surgical System, SurgiBot, Versius Robotic System, Master and Slave Transluminal Endoscopic Robot, Verb Surgical, Miniature In Vivo Robot, and the Einstein Surgical Robot. The use and demand for robotic medical and surgical platforms is increasing and new technologies are continually being developed. New technologies are increasingly implemented to improve on the capabilities of previously established systems. Future studies are needed to further evaluate the strengths and weaknesses of each robotic surgical device and platform in the operating suite.

  7. Apprehending the Future: Emerging Technologies, from Science Fiction to Campus Reality

    Science.gov (United States)

    Alexander, Bryan

    2009-01-01

    Deciding which technologies to support for teaching and learning--and how to support them--depends, first, on the ability to learn about each emerging development. Selecting a platform without knowing what is coming right behind it can be risky. Similarly, it is folly to grasp onto a technology without seeing the variety of ways that the…

  8. Technological considerations in emergency instrumentation preparedness. Phase II-D. Evaluation testing and calibration methodology for emergency radiological instrumentation

    International Nuclear Information System (INIS)

    Bramson, P.E.; Andersen, B.V.; Fleming, D.M.; Kathren, R.L.; Mulhern, O.R.; Newton, C.E.; Oscarson, E.E.; Selby, J.M.

    1976-09-01

    In response to recommendations from the Advisory Committee on Reactor Safeguards, the Division of Operational Safety, U.S. ERDA has contracted with Battelle, Pacific Northwest Laboratories to survey the adequacy of existing instrumentation at nuclear fuel cycle facilities to meet emergency requirements and to develop technical criteria for instrumentation systems to be used in assessment of environmental conditions following plant emergencies. This report, the fifth in a series, provides: (1) calibration methods to assure the quality of radiological measurements and (2) testing procedures for determining whether an emergency radiological instrument meets the performance specifications. Three previous reports in this series identified the emergency instrumentation needs for power reactors, mixed oxide fuel plants, and fuel reprocessing facilities. Each of these three reports contains a Section VI, which sets forth applicable radiological instrument performance criteria and calibration requirements. Testing and calibration procedures in this report have been formatted in two parts: IV and V, each divided into three subsections: (1) Power Reactors, (2) Mixed Oxide Fuel Plants, and (3) Fuel Reprocessing Facilities. The three performance criteria subsections directly coincide with the performance criteria sections of the previous reports. These performance criteria sections have been reproduced in this report as Part III with references of ''required action'' added

  9. Web 2.0 and Emerging Technologies in Online Learning

    Science.gov (United States)

    Diaz, Veronica

    2010-01-01

    As online learning continues to grow, so do the free or nearly free Web 2.0 and emerging online learning technologies available to faculty and students. This chapter explores the implementation process and corresponding considerations of adapting such tools for teaching and learning. Issues addressed include copyright, intellectual property,…

  10. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  11. Emergent collaboration infrastructures technology design for inter-organizational crisis management

    CERN Document Server

    Reuter, Christian

    2015-01-01

    ​Using the domain of crisis management, Christian Reuter explores challenges and opportunities for technology design in emergent environments. He therefore empirically analyzes collaborative work in inter-organizational crisis - such as the police, fire departments, energy network operators and citizens - in order to identify collaboration practices that reveal work infrastructure limitations. He also designs, implements and evaluates novel concepts and ICT artifacts towards the support of emergent collaboration. Besides the discovery of potential organizational effects on the ability to deal

  12. 47 CFR 74.690 - Transition of the 1990-2025 MHz band from the Broadcast Auxiliary Service to emerging technologies.

    Science.gov (United States)

    2010-10-01

    ... Broadcast Auxiliary Service to emerging technologies. 74.690 Section 74.690 Telecommunication FEDERAL... of the 1990-2025 MHz band from the Broadcast Auxiliary Service to emerging technologies. (a) New... licensed emerging technology services will maintain primary status in the band until the Existing Licensee...

  13. Emerging technologies in bioremediation: constraints and opportunities.

    Science.gov (United States)

    Rayu, Smriti; Karpouzas, Dimitrios G; Singh, Brajesh K

    2012-11-01

    Intensive industrialisation, inadequate disposal, large-scale manufacturing activities and leaks of organic compounds have resulted in long-term persistent sources of contamination of soil and groundwater. This is a major environmental, policy and health issue because of adverse effects of contaminants on humans and ecosystems. Current technologies for remediation of contaminated sites include chemical and physical remediation, incineration and bioremediation. With recent advancements, bioremediation offers an environmentally friendly, economically viable and socially acceptable option to remove contaminants from the environment. Three main approaches of bioremediation include use of microbes, plants and enzymatic remediation. All three approaches have been used with some success but are limited by various confounding factors. In this paper, we provide a brief overview on the approaches, their limitations and highlights emerging technologies that have potential to revolutionise the enzymatic and plant-based bioremediation approaches.

  14. New world balance and emerging countries - democracy, energy, technology

    International Nuclear Information System (INIS)

    Coulom, Steve

    2011-01-01

    The serious economic crisis which rages since 2008 has been the result of a troubled era which started years before and contributed to aggravate the phenomenon. Energy crisis, biodiversity loss, global warming and its effects, markets deregulation have added up to economic recession. We are today the witnesses of a new deal of the cards illustrated by the social revolts of several Arab countries around the Mediterranean Sea. In this changing world, the declining occident cannot impose its economical or political leadership and the main emerging countries (Brazil, Russia, India, China and South Africa: BRICS) play a more and more important role. With 30% of population increase expected in 2050, the emerging countries represent the driver of the world growth and have become the keys of development questions. In front of this irreversible movement, urgent and worldwide changes have to be done. First of all, huge technological efforts and changes of the existing international institutions (IMF, UNO, WTO) and of their governance are necessary to build up a sustainable economy and energy policy with emerging countries. Such a transformation will be painful for the Occident as it will change its vision of growth based on political domination and search of financial wealth, energy and resources. It is this effort that the author aims to present in this book in a practical and visionary way, where technological progress occupies an important place

  15. Emerging Earth Science Technologies in Disaster Risk Management: Prototype and Assessment

    Data.gov (United States)

    National Aeronautics and Space Administration — Examine emerging technologies and assess their potential to dramatically change the utility and impact of satellite data for GEOSS societal benefits • Investigate...

  16. Mass spectrometry-based proteomics: basic principles and emerging technologies and directions.

    Science.gov (United States)

    Van Riper, Susan K; de Jong, Ebbing P; Carlis, John V; Griffin, Timothy J

    2013-01-01

    As the main catalytic and structural molecules within living systems, proteins are the most likely biomolecules to be affected by radiation exposure. Proteomics, the comprehensive characterization of proteins within complex biological samples, is therefore a research approach ideally suited to assess the effects of radiation exposure on cells and tissues. For comprehensive characterization of proteomes, an analytical platform capable of quantifying protein abundance, identifying post-translation modifications and revealing members of protein complexes on a system-wide level is necessary. Mass spectrometry (MS), coupled with technologies for sample fractionation and automated data analysis, provides such a versatile and powerful platform. In this chapter we offer a view on the current state of MS-proteomics, and focus on emerging technologies within three areas: (1) New instrumental methods; (2) New computational methods for peptide identification; and (3) Label-free quantification. These emerging technologies should be valuable for researchers seeking to better understand biological effects of radiation on living systems.

  17. International Collaboration Patterns and Effecting Factors of Emerging Technologies

    Science.gov (United States)

    Bai, Xu; Liu, Yun

    2016-01-01

    With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology) among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a “balanced collaboration” mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits “small-world” characteristics in this respect. It also shows that the factors GDP per capita (GPC), R&D expenditure (RDE) and the export of global trade value (ETV) negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future. PMID:27911926

  18. International Collaboration Patterns and Effecting Factors of Emerging Technologies.

    Directory of Open Access Journals (Sweden)

    Xu Bai

    Full Text Available With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a "balanced collaboration" mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits "small-world" characteristics in this respect. It also shows that the factors GDP per capita (GPC, R&D expenditure (RDE and the export of global trade value (ETV negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future.

  19. International Conference on Emerging Trends in Science, Engineering and Technology

    CERN Document Server

    Caroline, B; Jayanthi, J

    2012-01-01

    The present book is based on the research papers presented in the International Conference on Emerging Trends in Science, Engineering and Technology 2012, held at Tiruchirapalli, India. The papers presented bridges the gap between science, engineering and technology. This book covers a variety of topics, including mechanical, production, aeronautical, material science, energy, civil and environmental energy, scientific management, etc. The prime objective of the book is to fully integrate the scientific contributions from academicians, industrialists and research scholars.

  20. Safety technology: Emergency equipment and sea rescue techniques

    Energy Technology Data Exchange (ETDEWEB)

    1986-06-01

    In June 1986, a two day workshop was convened to review mobile offshore drilling unit (MODU) evacuation research and development (R D) requirements for programs currently sponsored by the Marine Engineering Committee for PERD (Panel on Energy Research and Development) task 6.2. The proceedings of the workshop are presented in terms of: evacuation technology needs; a review of current R D projects for their relevance to the technological needs; recommended changes to current projects where warranted; and recommended priority R D projects that are not presently being undertaken to meet the evacuation technology needs. Current R D projects reviewed include: preferred orientation and displacement (PROD) lifeboat launching, personal transfer baskets, arctic escape system (AES), fast rescue craft (FRC), helicopter survival suits, diving bell emergency heaters, working immersion suits, diving bell emergency ascent system, undersea robotics systems and DCIEM decompression tables. It was concluded that gaps in offshore safety/evacuation capability cannot be adequately addressed by one or two major projects. Rather, a wider range of problems exist that require attention through a greater financial commitment than is presently the case. Government-industry cooperation in this field is required. Overall, the projects were judged to have been well planned, managed, and relevant to offshore safety needs. The only exception was a feeling that diving related projects consummed a disproportionate share of the available funding. Further, there was some reservation that the robotics study was outside the 6.2 PERD R D mandate. A list of recommendations is presented. 1 tab.

  1. Emerging technologies for emerging markets

    CERN Document Server

    Vong, John

    2015-01-01

    This book introduces inclusive-cost-effective (ICE) approaches that have the potential to transform all aspects of daily lives of people at the base of the pyramid in the economic scale, who represent more than 75% of the world population. ICE means that the approaches must meet the affordability level at the base of the pyramid. This includes mobile banking and financial service technologies, mobile education, rural information and communication technologies, telemedicine, e-Health, and health social networks. This monograph is a compulsory reading for not only technology innovators, but also economists, social entrepreneurs, development specialists, health specialists, bankers and researchers and policy thinkers on technology and economic development.

  2. Risoe energy report 1. New and emerging technologies - options for the future

    International Nuclear Information System (INIS)

    Larsen, H.; Soenderberg Petersen, L.

    2002-10-01

    All over the world, increasing energy consumption, liberalisation of energy markets and the need to take action on climate change are producing new challenges for the energy sector. At the same time there is increasing pressure for research, new technology and industrial products to be socially acceptable and to generate prosperity. The result is a complex and dynamic set of conditions affecting decisions on investment in research and new energy technology. To meet these challenges in the decades ahead, industrialists and policymakers need appropriate analyse energy systems, plus knowledge of trends for existing technologies and prospects for emerging technologies. This is the background for this first Risoe Energy Report, which sets out the global, European and Danish energy scene together with trends in development and emerging technologies. The report is the first in a new series from Risoe National Laboratory. The global energy developments are presented based on the latest available information from authoritative sources like IEA, WEC, World Energy Assessment etc. Some of the major challenges are presented in terms of the changing energy markets in all regions, the focus on environmental concerns in the industrialised countries, and energy for development and access to energy for the poor in developing countries. The report presents the status of R and D in progress for supply technologies. The various technologies are assessed with respect to status, trends and perspectives for the technology, and international R and D plans. For the technologies where Risoe is undertaking R and D this is highlighted in a separate section. Recent studies of emerging energy technologies from international organisations and leading research organisations are reviewed. There are reviews of national research activities on new energy technologies in a number of countries as well as in Risoe National Laboratory. Conclusions for Danish energy supply, Danish industry, and Danish

  3. Information and Communications Technology (ICT) in Nigeria Educational Assessment System--Emerging Challenges

    Science.gov (United States)

    Aworanti, Olatunde Awotokun

    2016-01-01

    This paper examines Information and Communications Technology (ICT) in Nigeria educational assessment system with its emerging challenges. This is inevitable following the globalisation trend which has brought drastic changes in the world of technology. The essence of the paper is to describe the present status of ICT in the Nigeria educational…

  4. An intelligent IoT emergency vehicle warning system using RFID and Wi-Fi technologies for emergency medical services.

    Science.gov (United States)

    Lai, Yeong-Lin; Chou, Yung-Hua; Chang, Li-Chih

    2018-01-01

    Collisions between emergency vehicles for emergency medical services (EMS) and public road users have been a serious problem, impacting on the safety of road users, emergency medical technicians (EMTs), and the patients on board. The aim of this study is to develop a novel intelligent emergency vehicle warning system for EMS applications. The intelligent emergency vehicle warning system is developed by Internet of Things (IoT), radio-frequency identification (RFID), and Wi-Fi technologies. The system consists of three major parts: a system trigger tag, an RFID system in an emergency vehicle, and an RFID system at an intersection. The RFID system either in an emergency vehicle or at an intersection contains a controller, an ultrahigh-frequency (UHF) RFID reader module, a Wi-Fi module, and a 2.4-GHz antenna. In addition, a UHF ID antenna is especially designed for the RFID system in an emergency vehicle. The IoT system provides real-time visual warning at an intersection and siren warning from an emergency vehicle in order to effectively inform road users about an emergency vehicle approaching. The developed intelligent IoT emergency vehicle warning system demonstrates the capabilities of real-time visual and siren warnings for EMS safety.

  5. Technology alliances in emerging economies : Persistence and interrelation in European firms’alliance formation

    NARCIS (Netherlands)

    Jacob, J.; Belderbos, R.; Gilsing, V.A.

    2013-01-01

    We analyse the patterns and determinants of technology alliance formation with partner firms from emerging economies with a focus on European firms' alliance strategies. We examine to what extent European firms' alliance formation with partners based in emerging economies is persistent – that is, to

  6. Human-Computer Interaction Handbook Fundamentals, Evolving Technologies, and Emerging Applications

    CERN Document Server

    Jacko, Julie A

    2012-01-01

    The third edition of a groundbreaking reference, The Human--Computer Interaction Handbook: Fundamentals, Evolving Technologies, and Emerging Applications raises the bar for handbooks in this field. It is the largest, most complete compilation of HCI theories, principles, advances, case studies, and more that exist within a single volume. The book captures the current and emerging sub-disciplines within HCI related to research, development, and practice that continue to advance at an astonishing rate. It features cutting-edge advances to the scientific knowledge base as well as visionary perspe

  7. Emerging desalination technologies for water treatment: a critical review.

    Science.gov (United States)

    Subramani, Arun; Jacangelo, Joseph G

    2015-05-15

    In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. III International Conference on Laser and Plasma Researches and Technologies

    Science.gov (United States)

    2017-12-01

    A.P. Kuznetsov and S.V. Genisaretskaya III Conference on Plasma and Laser Research and Technologies took place on January 24th until January 27th, 2017 at the National Research Nuclear University "MEPhI" (NRNU MEPhI). The Conference was organized by the Institute for Laser and Plasma Technologies and was supported by the Competitiveness Program of NRNU MEPhI. The conference program consisted of nine sections: • Laser physics and its application • Plasma physics and its application • Laser, plasma and radiation technologies in industry • Physics of extreme light fields • Controlled thermonuclear fusion • Modern problems of theoretical physics • Challenges in physics of solid state, functional materials and nanosystems • Particle accelerators and radiation technologies • Modern trends of quantum metrology. The conference is based on scientific fields as follows: • Laser, plasma and radiation technologies in industry, energetic, medicine; • Photonics, quantum metrology, optical information processing; • New functional materials, metamaterials, “smart” alloys and quantum systems; • Ultrahigh optical fields, high-power lasers, Mega Science facilities; • High-temperature plasma physics, environmentally-friendly energetic based on controlled thermonuclear fusion; • Spectroscopic synchrotron, neutron, laser research methods, quantum mechanical calculation and computer modelling of condensed media and nanostructures. More than 250 specialists took part in the Conference. They represented leading Russian scientific research centers and universities (National Research Centre "Kurchatov Institute", A.M. Prokhorov General Physics Institute, P.N. Lebedev Physical Institute, Troitsk Institute for Innovation and Fusion Research, Joint Institute for Nuclear Research, Moscow Institute of Physics and Tecnology and others) and leading scientific centers and universities from Germany, France, USA, Canada, Japan. We would like to thank heartily all of

  9. UC3M Emergencies : health center search, first aid, defibrillators, emergency exits, last warnings and torch (iOS platform)

    OpenAIRE

    Martín Civiac, María

    2013-01-01

    This document contains Maria Martin’s bachelor thesis. The issues that this project wants to solve are emergencies-related: health centersand emergency exits location,emergency call, first aid instructions and information and latest emergency alerts at Carlos III University. It has been detected that members of Carlos III University currently have difficulties to find health centers, emergency exits and first aid information. Furthermore, the University itself did not have any mechanism to pu...

  10. New and Emerging Technologies for Real-Time Air and Surface Beryllium Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Phifer, B.E. Jr.; Churnetski, E.L.; Cooke, L.E.; Reed, J.J.; Howell, M.L.; Smith, V.D.

    2001-09-01

    In this study, five emerging technologies were identified for real-time monitoring of airborne beryllium: Microwave-Induced Plasma Spectroscopy (MIPS), Aerosol Beam-Focused Laser-Induced Plasma Spectroscopy (ABFLIPS), Laser-Induced Breakdown Spectroscopy (LIBS), Surfaced-Enhanced Raman Scattering (SERS) Spectroscopy, and Micro-Calorimetric Spectroscopy (CalSpec). Desired features of real-time air beryllium monitoring instrumentation were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies as well as their unique demonstrated capability to provide real-time monitoring of similar materials. However, best available technologies were considered, regardless of their ability to comply with the desired features. None of the five technologies have the capability to measure the particle size of airborne beryllium. Although reducing the total concentration of airborne beryllium is important, current literature suggests that reducing or eliminating the concentration of respirable beryllium is critical for worker health protection. Eight emerging technologies were identified for surface monitoring of beryllium. CalSpec, MIPS, SERS, LIBS, Laser Ablation, Absorptive Stripping Voltametry (ASV), Modified Inductively Coupled Plasma (ICP) Spectroscopy, and Gamma BeAST. Desired features of real-time surface beryllium monitoring were developed from the Y-12 CBDPP. These features were used as guidelines for the identification of potential technologies. However, the best available technologies were considered regardless of their ability to comply with the desired features.

  11. How can emergency physicians harness the power of new technologies in clinical practice and education?

    Science.gov (United States)

    Carley, Simon; Laing, Simon

    2018-03-01

    As the Royal College of Emergency Medicine looks back on 50 years of progress towards the future it is clear that new and emerging technologies have the potential to substantially change the practice of emergency medicine. Education, diagnostics, therapeutics are all likely to change as algorithms, personalised medicine and insights into complexity become more readily available to the emergency clinician. This paper outlines areas of our practice that are already changing and speculates on how we might need to prepare our workforce for a technologically enhanced future. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  12. Emerging Energy-efficiency and Carbon Dioxide Emissions-reduction Technologies for the Iron and Steel Industry

    Energy Technology Data Exchange (ETDEWEB)

    Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Arens, Marlene [Fraunhofer Inst. for Systems and Innovation Research (ISI), Karlsruhe (Germany)

    2013-01-31

    Iron and steel manufacturing is among the most energy-intensive industries and accounts for the largest share, approximately 27 percent, of global carbon dioxide (CO2) emissions from the manufacturing sector. The ongoing increase in world steel demand means that this industry’s energy use and CO2 emissions continue to grow, so there is significant incentive to develop, commercialize and adopt emerging energy-efficiency and CO2 emissions-reduction technologies for steel production. Although studies from around the world have identified a wide range of energy-efficiency technologies applicable to the steel industry that have already been commercialized, information is limited and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on 56 emerging iron and steel industry technologies, with the intent of providing a well-structured database of information on these technologies for engineers, researchers, investors, steel companies, policy makers, and other interested parties. For each technology included, we provide information on energy savings and environmental and other benefits, costs, and commercialization status; we also identify references for more information.

  13. 40 CFR 300.220 - Related Title III issues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 27 2010-07-01 2010-07-01 false Related Title III issues. 300.220 Section 300.220 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SUPERFUND, EMERGENCY... PLAN Planning and Preparedness § 300.220 Related Title III issues. Other related Title III requirements...

  14. International Conference on Emerging Technologies for Information Systems, Computing, and Management

    CERN Document Server

    Ma, Tinghuai; Emerging Technologies for Information Systems, Computing, and Management

    2013-01-01

    This book aims to examine innovation in the fields of information technology, software engineering, industrial engineering, management engineering. Topics covered in this publication include; Information System Security, Privacy, Quality Assurance, High-Performance Computing and Information System Management and Integration. The book presents papers from The Second International Conference for Emerging Technologies Information Systems, Computing, and Management (ICM2012) which was held on December 1 to 2, 2012 in Hangzhou, China.

  15. Management of Emerging Technologies and the Learning Organization : Lessons from the Cloud and Serious Games Technology

    NARCIS (Netherlands)

    A. Alexiou (Andreas)

    2016-01-01

    markdownabstractThis thesis takes learning as a starting point to investigate its associations with successful emerging technologies adoption as well as the act of adaptation to discontinuous change as captured by the phenomenon of organizational resilience. The first part of the thesis explores

  16. Iron(II) and Iron(III) Spin Crossover: Toward an Optimal Density Functional

    DEFF Research Database (Denmark)

    Siig, Oliver S; Kepp, Kasper P.

    2018-01-01

    Spin crossover (SCO) plays a major role in biochemistry, catalysis, materials, and emerging technologies such as molecular electronics and sensors, and thus accurate prediction and design of SCO systems is of high priority. However, the main tool for this purpose, density functional theory (DFT......), is very sensitive to applied methodology. The most abundant SCO systems are Fe(II) and Fe(III) systems. Even with average good agreement, a functional may be significantly more accurate for Fe(II) or Fe(III) systems, preventing balanced study of SCO candidates of both types. The present work investigates....../precise, inaccurate/imprecise) are observed. More generally, our work illustrates the importance not only of overall accuracy but also of balanced accuracy for systems likely to occur in context....

  17. Residual learning rates in lead-acid batteries: Effects on emerging technologies

    International Nuclear Information System (INIS)

    Matteson, Schuyler; Williams, Eric

    2015-01-01

    The low price of lead-acid, the most popular battery, is often used in setting cost targets for emerging energy storage technologies. Future cost reductions in lead acid batteries could increase investment and time scales needed for emerging storage technologies to reach cost-parity. In this paper the first documented model of cost reductions for lead-acid batteries is developed. Regression to a standard experience curve using 1989–2012 data yield a poor fit, with R 2 values of 0.17 for small batteries and 0.05 for larger systems. To address this problem, battery costs are separated into material and residual costs, and experience curves developed for residual costs. Depending on the year, residual costs account for 41–86% of total battery cost. Using running-time averages to address volatility in material costs, a 4-year time average experience curve for residual costs yield much higher R 2 , 0.78 for small and 0.74 for large lead-acid batteries. The learning rate for residual costs in lead-acid batteries is 20%, a discovery with policy implications. Neglecting to consider cost reductions in lead-acid batteries could result in failure of energy storage start-ups and public policy programs. Generalizing this result, learning in incumbent technologies must be understood to assess the potential of emerging ones. -- Highlights: •We analyze potential cost reductions in lead-acid batteries. •Modified experience curve for non-material costs gives good empirical fit. •Historical learning rate for non-material costs from 1985–2012 is 19–24%. •Progress in incumbent technology raises barrier to new entrants

  18. The Viability of Mobile Services (SMS and Cell Broadcast in Emergency Management Solutions: An Exploratory Study

    Directory of Open Access Journals (Sweden)

    Mahmoud Al-dalahmeh

    2018-01-01

    Full Text Available In this paper the path forward in location-based mobile phone warning systems is given against a concise backdrop of their deployment worldwide. Of relevance here is (i how the systems are implemented using legislation, contractual service level agreement instruments or a hybrid approach, (ii whether or not governments who deploy these systems will carry the cost of the deployment during an emergency or disaster, and (iii whether or not carrier participation is mandated. Of particular importance are also the underlying technologies of this kind of emergency systems. To date, the short message service and cell broadcast service have been the main technologies to be utilised by governments in the application of location-based services in modern emergency management solutions. However, these technologies will most certainly be superseded by newer, more powerful capabilities. A comprehensive list of requirements for the future location-based emergency systems is presented also in this paper. In essence, these are recommendations to be adhered to if robust solutions using new technologies are to be deployed in a nation state.

  19. An Axiomatic Design Approach of Nanofluid-Engineered Nuclear Safety Features for Generation III+ React

    International Nuclear Information System (INIS)

    Bang, In Cheol; Heo, Gyun Young; Jeong, Yong Hoon; Heo, Sun

    2009-01-01

    A variety of Generation III/III+ reactor designs featuring enhanced safety and improved economics are being proposed by nuclear power industries around the world to solve the future energy supply shortfall. Nanofluid coolants showing an improved thermal performance are being considered as a new key technology to secure nuclear safety and economics. However, it should be noted that there is a lack of comprehensible design works to apply nanofluids to Generation III+ reactor designs. In this work, the review of accident scenarios that consider expected nanofluid mechanisms is carried out to seek detailed application spots. The Axiomatic Design (AD) theory is then applied to systemize the design of nanofluid-engineered nuclear safety systems such as Emergency Core Cooling System (ECCS) and External Reactor Vessel Cooling System (ERVCS). The various couplings between Gen-III/III+ nuclear safety features and nanofluids are investigated and they try to be reduced from the perspective of the AD in terms of prevention/mitigation of severe accidents. This study contributes to the establishment of a standard communication protocol in the design of nanofluid-engineered nuclear safety systems

  20. Interplanetary laser ranging - an emerging technology for planetary science missions

    Science.gov (United States)

    Dirkx, D.; Vermeersen, L. L. A.

    2012-09-01

    Interplanetary laser ranging (ILR) is an emerging technology for very high accuracy distance determination between Earth-based stations and spacecraft or landers at interplanetary distances. It has evolved from laser ranging to Earth-orbiting satellites, modified with active laser transceiver systems at both ends of the link instead of the passive space-based retroreflectors. It has been estimated that this technology can be used for mm- to cm-level accuracy range determination at interplanetary distances [2, 7]. Work is being performed in the ESPaCE project [6] to evaluate in detail the potential and limitations of this technology by means of bottom-up laser link simulation, allowing for a reliable performance estimate from mission architecture and hardware characteristics.

  1. Relationship between organizational climate and burnout syndrome in the emergency service of a hospital Category III-2. Lima, Peru 2015

    OpenAIRE

    Zenaida Solís Chuquiyaur; Luisa Zamudio Eslava; Juan Matzumura Kasano; Hugo Gutiérrez Crespo

    2016-01-01

    Objective: To determine the relationship between organizational climate and Burnout Syndrome among nursing professionals of the Emergency Service in a Hospital Category III-2. Material and methods: quantitative, prospective, correlational cross-sectional study. The sample consisted of 43 nurses, using a non-probability sampling for convenience. For analysis and study of the variables, Rensis Likert scale and Maslach Burnout Inventory were used. Results: The organizational clima...

  2. Emerging Food Processing Technologies and Factors Impacting their Industrial Adoption.

    Science.gov (United States)

    Priyadarshini, Anushree; Rajauria, Gaurav; O'Donnell, Colm P; Tiwari, Brijesh K

    2018-06-04

    Innovative food processing technologies have been widely investigated in food processing research in recent years. These technologies offer key advantages for advancing the preservation and quality of conventional foods, for combatting the growing challenges posed by globalization, increased competitive pressures and diverse consumer demands. However, there is a need to increase the level of adoption of novel technologies to ensure the potential benefits of these technologies are exploited more by the food industry. This review outlines emerging thermal and non-thermal food processing technologies with regard to their mechanisms, applications and commercial aspects. The level of adoption of novel food processing technologies by the food industry is outlined and the factors that impact their industrial adoption are discussed. At an industry level, the technological capabilities of individual companies, their size, market share as well as their absorptive capacity impact adoption of a novel technology. Characteristics of the technology itself such as costs involved in its development and commercialization, associated risks and relative advantage, its level of complexity and compatibility influence the technology's adoption. The review concludes that a deep understanding of the development and application of a technology along with the factors influencing its acceptance are critical for its commercial adoption.

  3. The Role of Emerging Technologies in Improving Energy Efficiency:Examples from the Food Processing Industry

    Energy Technology Data Exchange (ETDEWEB)

    Lung, Robert Bruce; Masanet, Eric; McKane, Aimee

    2006-05-01

    For over 25 years, the U.S. DOE's Industrial Technologies Program (ITP) has championed the application of emerging technologies in industrial plants and monitored these technologies impacts on industrial energy consumption. The cumulative energy savings of more than 160 completed and tracked projects is estimated at approximately 3.99 quadrillion Btu (quad), representing a production cost savings of $20.4 billion. Properly documenting the impacts of such technologies is essential for assessing their effectiveness and for delivering insights about the optimal direction of future technology research. This paper analyzes the impacts that several emerging technologies have had in the food processing industry. The analysis documents energy savings, carbon emissions reductions and production improvements and assesses the market penetration and sector-wide savings potential. Case study data is presented demonstrating the successful implementation of these technologies. The paper's conclusion discusses the effects of these technologies and offers some projections of sector-wide impacts.

  4. Overview of radiation effects on emerging non-volatile memory technologies

    Directory of Open Access Journals (Sweden)

    Fetahović Irfan S.

    2017-01-01

    Full Text Available In this paper we give an overview of radiation effects in emergent, non-volatile memory technologies. Investigations into radiation hardness of resistive random access memory, ferroelectric random access memory, magneto-resistive random access memory, and phase change memory are presented in cases where these memory devices were subjected to different types of radiation. The obtained results proved high radiation tolerance of studied devices making them good candidates for application in radiation-intensive environments. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 171007

  5. The minipig as a platform for new technologies in toxicology

    DEFF Research Database (Denmark)

    Forster, Roy; Ancian, Philippe; Fredholm, Merete

    2010-01-01

    The potential of the minipig as a platform for future developments in genomics, high density biology, transgenic technology, in vitro toxicology and related emerging technologies was reviewed. Commercial interests in the pig as an agricultural production species have driven scientific progress...... pigs and humans suggest that minipigs will be useful for the testing of biotechnology products (and possibly for in silico toxicology) and (iii) the minipig is the only non-rodent toxicology model where transgenic animals can be readily generated, and reproductive technologies are well developed...... in the pig. These properties should also make the minipig an interesting model for the testing of biotechnology products. These factors all support the idea that the minipig is well placed to meet the challenges of the emerging technologies and the toxicology of the future; it also seems likely...

  6. Safe introduction of new procedures and emerging technologies in surgery: education, credentialing, and privileging.

    Science.gov (United States)

    Sachdeva, Ajit K; Russell, Thomas R

    2007-08-01

    Ongoing horizon scanning is needed to identify new procedures and emerging technologies that should be evaluated for introduction into surgical practice. Following evidence-based evaluation, if a new modality is found ready for adoption in practice, surgeons need education in the safe and effective use of the new modality. The educational experience should include structured teaching and learning, verification of new knowledge and skills, preceptoring or proctoring, and monitoring of outcomes. Credentialing and privileging to perform a new procedure or use an emerging technology should be based on evaluation of knowledge and skills and outcomes of surgical care, and not merely on the numbers of procedures performed. Education of the surgical team is also essential. The entire process involving education, verification of knowledge and skills, credentialing, and privileging must be transparent. Patients need to play a central role in making informed decisions regarding their care that involves use of a new procedure or an emerging technology, and they should participate actively in their perioperative care.

  7. Emerging Energy-efficiency and CO{sub 2} Emission-reduction Technologies for Cement and Concrete Production

    Energy Technology Data Exchange (ETDEWEB)

    Hasanbeigi, Ali; Price, Lynn; Lin, Elina

    2012-04-06

    Globally, the cement industry accounts for approximately 5 percent of current anthropogenic carbon dioxide (CO{sub 2}) emissions. World cement demand and production are increasing significantly, leading to an increase in this industry's absolute energy use and CO{sub 2} emissions. Development of new energy-efficiency and CO{sub 2} emission-reduction technologies and their deployment in the market will be key for the cement industry's mid- and long-term climate change mitigation strategies. This report is an initial effort to compile available information on process description, energy savings, environmental and other benefits, costs, commercialization status, and references for emerging technologies to reduce the cement industry's energy use and CO{sub 2} emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies for the cement industry that have already been commercialized, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on nineteen emerging technologies for the cement industry, with the goal of providing engineers, researchers, investors, cement companies, policy makers, and other interested parties with easy access to a well-structured database of information on these technologies.

  8. 1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

    International Nuclear Information System (INIS)

    Lewis, N.M.; Barkley, N.P.; Williams, T.

    1992-01-01

    The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

  9. The role of utilities in enabling technology innovation: The BC hydro alternative & emerging energy strategy

    Energy Technology Data Exchange (ETDEWEB)

    Tu, Alex; Leclair, Donna; Morrison, Allison

    2010-09-15

    In order for renewable energy to play a dominant role in the global electricity supply mix, emerging renewable energy technologies - such as wave, tidal, enhanced geothermal, and 3rd generation photovoltaic technologies - must prove their technical merits and achieve cost parity with conventional sources of supply. BC Hydro, a government-owned electric utility, launched an Alternative and Emerging Energy Strategy that describes its role as an enabler of technology innovation. This paper describes BC Hydro's goal, objectives and actions to accelerate the commercialization that will yield a diversity of supply options and a growing, local clean-tech cluster.

  10. An Analysis of Knowledge Sharing Approaches for Emerging-technology-based Strategic Alliances in Electronic Industry

    Institute of Scientific and Technical Information of China (English)

    LIU Ju; LI Yong-jian

    2006-01-01

    Emerging technologies are now initiating new industries and transforming old ones with tremendous power. They are different games compared with established technologies with distinctive characteristics of knowledge management in knowledge-based and technological-innovation-based competition. How to obtain knowledge advantage and enhance competences by knowledge sharing for emerging-technology-based strategic alliances (ETBSA) is what we concern in this paper. On the basis of our previous work on emerging technologies'distinctive attributes, we counter the wide spread presumption that the primary purpose of strategic alliances is knowledge acquiring by means of learning. We offers new insight into the knowledge sharing approaches of ETBSAs - the knowledge integrating approach by which each member firm integrates its partner's complementary knowledge base into the products and services and maintains its own knowledge specialization at the same time. So that ETBSAs should plan and practice their knowledge sharing strategies from the angle of knowledge integrating rather than knowledge acquiring. A four-dimensional framework is developed to analyze the advantages and disadvantages of these two knowledge sharing approaches. Some cases in electronic industry are introduced to illustrate our point of view.

  11. A review of emerging technologies for food refrigeration applications

    International Nuclear Information System (INIS)

    Tassou, S.A.; Lewis, J.S.; Ge, Y.T.; Hadawey, A.; Chaer, I.

    2010-01-01

    Refrigeration has become an essential part of the food chain. It is used in all stages of the chain, from food processing, to distribution, retail and final consumption in the home. The food industry employs both chilling and freezing processes where the food is cooled from ambient to temperatures above 0 deg. C in the former and between -18 deg. C and -35 deg. C in the latter to slow the physical, microbiological and chemical activities that cause deterioration in foods. In these processes mechanical refrigeration technologies are invariably employed that contribute significantly to the environmental impacts of the food sector both through direct and indirect greenhouse gas emissions. To reduce these emissions, research and development worldwide is aimed at both improving the performance of conventional systems and the development of new refrigeration technologies of potentially much lower environmental impacts. This paper provides a brief review of both current state of the art technologies and emerging refrigeration technologies that have the potential to reduce the environmental impacts of refrigeration in the food industry. The paper also highlights research and development needs to accelerate the development and adoption of these technologies by the food sector.

  12. Developing Information on Energy Savings and Associated Costs and Benefits of Energy Efficient Emerging Technologies Applicable in California

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Tengfang; Slaa, Jan Willem; Sathaye, Jayant

    2010-12-15

    Implementation and adoption of efficient end-use technologies have proven to be one of the key measures for reducing greenhouse gas (GHG) emissions throughout the industries. In many cases, implementing energy efficiency measures is among one of the most cost effective investments that the industry could make in improving efficiency and productivity while reducing carbon dioxide (CO2) emissions. Over the years, there have been incentives to use resources and energy in a cleaner and more efficient way to create industries that are sustainable and more productive. With the working of energy programs and policies on GHG inventory and regulation, understanding and managing the costs associated with mitigation measures for GHG reductions is very important for the industry and policy makers around the world and in California. Successful implementation of applicable emerging technologies not only may help advance productivities, improve environmental impacts, or enhance industrial competitiveness, but also can play a significant role in climate-mitigation efforts by saving energy and reducing the associated GHG emissions. Developing new information on costs and savings benefits of energy efficient emerging technologies applicable in California market is important for policy makers as well as the industries. Therefore, provision of timely evaluation and estimation of the costs and energy savings potential of emerging technologies applicable to California is the focus of this report. The overall goal of the project is to identify and select a set of emerging and under-utilized energy-efficient technologies and practices as they are important to reduce energy consumption in industry while maintaining economic growth. Specifically, this report contains the results from performing Task 3 Technology Characterization for California Industries for the project titled Research Opportunities in Emerging and Under-Utilized Energy-Efficient Industrial Technologies, sponsored by

  13. Augmented reality art from an emerging technology to a novel creative medium

    CERN Document Server

    Geroimenko, Vladimir

    2014-01-01

    This is the first ever book on augmented reality art. It is written by a team of world-leading artists, researchers and practitioners, pioneering in the use of augmented reality technology as a novel artistic medium. The book explores a wide range of major aspects of augmented reality art and its enabling technology. It is intended to be a starting point and essential reading not only for artists, researchers and technology developers, but also for students (both graduates and undergraduates) and everyone who is interested in emerging augmented reality technology and its current and future app

  14. New generation emerging technologies for neurorehabilitation and motor assistance.

    Science.gov (United States)

    Frisoli, Antonio; Solazzi, Massimiliano; Loconsole, Claudio; Barsotti, Michele

    2016-12-01

    This paper illustrates the application of emerging technologies and human-machine interfaces to the neurorehabilitation and motor assistance fields. The contribution focuses on wearable technologies and in particular on robotic exoskeleton as tools for increasing freedom to move and performing Activities of Daily Living (ADLs). This would result in a deep improvement in quality of life, also in terms of improved function of internal organs and general health status. Furthermore, the integration of these robotic systems with advanced bio-signal driven human-machine interface can increase the degree of participation of patient in robotic training allowing to recognize user's intention and assisting the patient in rehabilitation tasks, thus representing a fundamental aspect to elicit motor learning.

  15. Mobile Assisted Language Learning: Review of the Recent Applications of Emerging Mobile Technologies

    Science.gov (United States)

    Yang, Jaeseok

    2013-01-01

    As mobile computing technologies have been more powerful and inclusive in people's daily life, the issue of mobile assisted language learning (MALL) has also been widely explored in CALL research. Many researches on MALL consider the emerging mobile technologies have considerable potentials for the effective language learning. This review study…

  16. A Study of Scientometric Methods to Identify Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Abercrombie, Robert K [ORNL; Udoeyop, Akaninyene W [ORNL

    2011-01-01

    This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

  17. Teacher design of technology for emergent literacy: An explorative feasibility study

    NARCIS (Netherlands)

    McKenney, Susan; Voogt, Joke

    2012-01-01

    The active participation of teachers in designing classroom learning experiences contributes to teacher abilities to facilitate learning. This paper reports on a case study of one Dutch teacher designing a technology-rich learning environment for emergent literacy. Data was collected to explore the

  18. Case Study – Idling Reduction Technologies for Emergency Service Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Laughlin, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Owens, Russell J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    This case study explores the use of idle reduction technologies (IRTs) on emergency service vehicles in police, fire, and ambulance applications. Various commercially available IRT systems and approaches can decrease, or ultimately eliminate, engine idling. Fleets will thus save money on fuel, and will also decrease their criteria pollutant emissions, greenhouse gas emissions, and noise.

  19. Emerging Technologies for the Clinical Microbiology Laboratory

    Science.gov (United States)

    Buchan, Blake W.

    2014-01-01

    SUMMARY In this review we examine the literature related to emerging technologies that will help to reshape the clinical microbiology laboratory. These topics include nucleic acid amplification tests such as isothermal and point-of-care molecular diagnostics, multiplexed panels for syndromic diagnosis, digital PCR, next-generation sequencing, and automation of molecular tests. We also review matrix-assisted laser desorption ionization–time of flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry methods and their role in identification of microorganisms. Lastly, we review the shift to liquid-based microbiology and the integration of partial and full laboratory automation that are beginning to impact the clinical microbiology laboratory. PMID:25278575

  20. Emerging solid-state laser technology by lidar/DIAL remote sensing

    Science.gov (United States)

    Killinger, Dennis

    1992-01-01

    Significant progress has been made in recent years in the development of new, solid-state laser sources. This talk will present an overview of some of the new developments in solid-state lasers, and their application toward lidar/DIAL measurements of the atmosphere. Newly emerging lasers such as Ho:YAG, Tm:YAG, OPO, and Ti:Sapphire will be covered, along with the spectroscopic parameters required for differential operational modes of atmospheric remote sensing including Doppler-Windshear lidar, Tunable laser detection of water/CO2, and broad linewidth OPO's for open path detection of pollutant hydrocarbon gases. Additional considerations of emerging laser technology for lidar/DIAL will also be covered.

  1. Voice Assessment of Student Work: Recent Studies and Emerging Technologies

    Science.gov (United States)

    Eckhouse, Barry; Carroll, Rebecca

    2013-01-01

    Although relatively little attention has been given to the voice assessment of student work, at least when compared with more traditional forms of text-based review, the attention it has received strongly points to a promising form of review that has been hampered by the limits of an emerging technology. A fresh review of voice assessment in light…

  2. Healthcare information technology and medical-surgical nurses: the emergence of a new care partnership.

    Science.gov (United States)

    Moore, An'Nita; Fisher, Kathleen

    2012-03-01

    Healthcare information technology in US hospitals and ambulatory care centers continues to expand, and nurses are expected to effectively and efficiently utilize this technology. Researchers suggest that clinical information systems have expanded the realm of nursing to integrate technology as an element as important in nursing practice as the patient or population being served. This study sought to explore how medical surgical nurses make use of healthcare information technology in their current clinical practice and to examine the influence of healthcare information technology on nurses' clinical decision making. A total of eight medical surgical nurses participated in the study, four novice and four experienced. A conventional content analysis was utilized that allowed for a thematic interpretation of participant data. Five themes emerged: (1) healthcare information technology as a care coordination partner, (2) healthcare information technology as a change agent in the care delivery environment, (3) healthcare information technology-unable to meet all the needs, of all the people, all the time, (4) curiosity about healthcare information technology-what other bells and whistles exist, and (5) Big Brother is watching. The results of this study indicate that a new care partnership has emerged as the provision of nursing care is no longer supplied by a single practitioner but rather by a paired team, consisting of nurses and technology, working collaboratively in an interdependent relationship to achieve established goals.

  3. CHARACTERIZING COSTS, SAVINGS AND BENEFITS OF A SELECTION OF ENERGY EFFICIENT EMERGING TECHNOLOGIES IN THE UNITED STATES

    Energy Technology Data Exchange (ETDEWEB)

    Xu, T.; Slaa, J.W.; Sathaye, J.

    2010-12-15

    Implementation and adoption of efficient end-use technologies have proven to be one of the key measures for reducing greenhouse gas (GHG) emissions throughout the industries. In many cases, implementing energy efficiency measures is among one of the most cost effective investments that the industry could make in improving efficiency and productivity while reducing CO2 emissions. Over the years, there have been incentives to use resources and energy in a cleaner and more efficient way to create industries that are sustainable and more productive. With the working of energy programs and policies on GHG inventory and regulation, understanding and managing the costs associated with mitigation measures for GHG reductions is very important for the industry and policy makers around the world. Successful implementation of emerging technologies not only can help advance productivities and competitiveness but also can play a significant role in mitigation efforts by saving energy. Providing evaluation and estimation of the costs and energy savings potential of emerging technologies is the focus of our work in this project. The overall goal of the project is to identify and select emerging and under-utilized energy-efficient technologies and practices as they are important to reduce energy consumption in industry while maintaining economic growth. This report contains the results from performing Task 2"Technology evaluation" for the project titled"Research Opportunities in Emerging and Under-Utilized Energy-Efficient Industrial Technologies," which was sponsored by California Energy Commission and managed by CIEE. The project purpose is to analyze market status, market potential, and economic viability of selected technologies applicable to the U.S. In this report, LBNL first performed re-assessments of all of the 33 emerging energy-efficient industrial technologies, including re-evaluation of the 26 technologies that were previously identified by Martin et al. (2000) and

  4. Chemical Genomics and Emerging DNA Technologies in the Identification of Drug Mechanisms and Drug Targets

    DEFF Research Database (Denmark)

    Olsen, Louise Cathrine Braun; Færgeman, Nils J.

    2012-01-01

    and validate therapeutic targets and to discover drug candidates for rapidly and effectively generating new interventions for human diseases. The recent emergence of genomic technologies and their application on genetically tractable model organisms like Drosophila melanogaster,Caenorhabditis elegans...... critical roles in the genomic age of biological research and drug discovery. In the present review we discuss how simple biological model organisms can be used as screening platforms in combination with emerging genomic technologies to advance the identification of potential drugs and their molecular...

  5. Emerging technology and architecture for big-data analytics

    CERN Document Server

    Chang, Chip; Yu, Hao

    2017-01-01

    This book describes the current state of the art in big-data analytics, from a technology and hardware architecture perspective. The presentation is designed to be accessible to a broad audience, with general knowledge of hardware design and some interest in big-data analytics. Coverage includes emerging technology and devices for data-analytics, circuit design for data-analytics, and architecture and algorithms to support data-analytics. Readers will benefit from the realistic context used by the authors, which demonstrates what works, what doesn’t work, and what are the fundamental problems, solutions, upcoming challenges and opportunities. Provides a single-source reference to hardware architectures for big-data analytics; Covers various levels of big-data analytics hardware design abstraction and flow, from device, to circuits and systems; Demonstrates how non-volatile memory (NVM) based hardware platforms can be a viable solution to existing challenges in hardware architecture for big-data analytics.

  6. A study on the improvement of nuclear emergency countermeasure technology for local government

    International Nuclear Information System (INIS)

    Khang, Byung Oui; Lee, J. T.; Lee, G. Y.

    2005-01-01

    There were necessities of the establishment of the regional nuclear emergency plan on the nuclear disaster of nuclear facilities according to the 'nuclear facilities physical protection and emergency preparedness act' and the strengthening of the regional nuclear disaster management system to get confidence on the related national policy from the public and the defining and improving the relationship between local government and other organizations on responsibilities, authorities, duties and support. So, the project was started, the Results of the project are the establishment of Regional Nuclear Emergency Plan (Draft) connected to the national safety management basic plan and national radiological emergency plan which contains the description of the emergency preparedness to respond nuclear disaster and the duty description of related organizations to respond a nuclear disaster and several description of nuclear emergency preparedness. And this report describes the regional nuclear disaster countermeasure technology improvement and the emergency training, drill, exercise methodology

  7. SITE - EMERGING TECHNOLOGIES: LASER INDUCED PHOTO- CHEMICAL OXIDATIVE DESTRUCTION OF TOXIC ORGANICS IN LEACHATES AND GROUNDWATERS

    Science.gov (United States)

    The technology described in this report has been developed under the Emerging Technology Program of the Superfund Innovative Technology Evaluation (SITE) Program to photochemically oxidize organic compounds in wastewater by applying ultraviolet radiation using an excimer laser. T...

  8. Emerging digital technologies come into the University: AR and VR

    Directory of Open Access Journals (Sweden)

    Julio Cabero Almenara

    2018-02-01

    Full Text Available A set of emerging technologies have been approaching university education in the last decade as it had not happened in previous times. Many of these technologies can be considered as disruptive, since they are transforming and improving the training scenarios. Among the technologies that are taking greater momentum and importance we find augmented reality and virtual reality, as evidenced by various reports Horizon and Edutrens. Although the research on the integration of these technologies is in an early stage, we can affirm that those carried out so far demonstrate the great benefits they incorporate into the teaching-learning process. Among these contributions we can highlight the improvement of the motivation, the satisfaction and the performance of the students. In this article we will cover the current state of the University regarding ICT integration, focusing on the technologies that have been bursting with greater force in recent times. In addition, we will focus on two of the technologies “augmented reality and virtual reality” that are experiencing more impact in recent years, showing evidences and mentioning their implementation in the university environment.

  9. China, the United States, and competition for resources that enable emerging technologies

    Science.gov (United States)

    Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

    2018-01-01

    Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

  10. Multi-path mapping for alignment strategies in emerging science and technologies

    NARCIS (Netherlands)

    Robinson, D.K.R.; Propp, T.; Propp, Tilo

    2008-01-01

    Roadmapping serves both short and long term (strategic) alignment in science and technology (S&T). Forecasts of the likely future development of S&T are generated; then research and development (R&D) efforts necessary to realize various goals are backcast. But for new and emerging S&T this trusted

  11. Comparing different technologies for wireless real-time dose rate monitoring for on- and offsite emergency management

    International Nuclear Information System (INIS)

    Dielmann, R.

    2004-01-01

    At a nuclear disaster the efficiency of emergency management on-site as well as off-site is closely connected to the quality and reliability of the actual status information. Reliability and short response time of the data communication path are important in the early phase. In order to protect investment and minimize TCO (Total Cost of Ownership) the dose rate measurement systems should also be adequate for the later phase emergency management and rehabilitation of contaminated areas. Based on four years experience the pros and cons of available GSM / GPRS / UMTS / TETRA (Terrestrial Trunked Radio) and satellite based technologies are compared with SkyLINK - a proprietary wireless network technology which is fully owned by the supervising authority or a nuclear installation. The European Commission's decision in 1999 to opt for this state-of-the-art technology within the TACIS program fulfills highest standards for emergency management networks featuring especially: independence of public communication lines, good data availability also in rural areas and in emergency scenarios, fast installation, system startup and training, extreme mobility in emergency cases, high flexibility for changing tasks, very high degree of autonomy, low operating and maintenance costs over a ten year lifetime, long-term reliability of probes and data management system. After more than four years of experience with installations around the world especially those installed around three Russian nuclear power plants a comparison of this reliably operating technology can be done. (author)

  12. The role of technology in reducing health care costs. Phase II and phase III.

    Energy Technology Data Exchange (ETDEWEB)

    Cilke, John F.; Parks, Raymond C.; Funkhouser, Donald Ray; Tebo, Michael A.; Murphy, Martin D.; Hightower, Marion Michael; Gallagher, Linda K.; Craft, Richard Layne, II; Garcia, Rudy John

    2004-04-01

    In Phase I of this project, reported in SAND97-1922, Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. The effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements and an economic analysis model for development of care pathway costs for two conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Phases II and III of this project, which are presented in this report, were directed at detailing the parameters of telemedicine that influence care delivery costs and quality. These results were used to identify and field test the communication, interoperability, and security capabilities needed for cost-effective, secure, and reliable health care via telemedicine.

  13. 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies

    CERN Document Server

    Kumar, Amit; Sankar, V; Rao, N; Sarma, T

    2017-01-01

    This book includes the original, peer-reviewed research from the 2nd International Conference on Emerging Trends in Electrical, Communication and Information Technologies (ICECIT 2015), held in December, 2015 at Srinivasa Ramanujan Institute of Technology, Ananthapuramu, Andhra Pradesh, India. It covers the latest research trends or developments in areas of Electrical Engineering, Electronic and Communication Engineering, and Computer Science and Information.

  14. A Review of Emerging Technologies for the Detection and Diagnosis of Dental Caries

    Science.gov (United States)

    2016-06-01

    i A REVIEW OF EMERGING TECHNOLOGIES FOR DETECTON AND DIAGNOSIS OF DENTAL CARIES by Walter B. Volinski Jr. Lieutenant... CARIES WALTER B. VOLINSKI JR. DDS, COMPREHENSIVE DEPARTMENT, 2016 Thesis directed by: Ling Ye, DDS, PhD LCDR, DC, USN Department of Dental...diagnosis of dental caries and to compare their efficacy and accuracy to visual, tactile, and radiographic examination. Methods: The technologies reviewed

  15. American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee Report on Electronic Brachytherapy

    International Nuclear Information System (INIS)

    Park, Catherine C.; Yom, Sue S.; Podgorsak, Matthew B.; Harris, Eleanor; Price, Robert A.; Bevan, Alison; Pouliot, Jean; Konski, Andre A.; Wallner, Paul E.

    2010-01-01

    The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.

  16. Barriers and possibilities for the emerging alternative lighting technologies

    DEFF Research Database (Denmark)

    Bjarklev, Araceli; Kjær, Tyge; Andersen, Jan

    2009-01-01

    the incandescent lamp; However, the emergence of other illumination technologies such as Light Emitting Diodes (LEDs) are currently raising in question, whether the fluorescent lamp is the technology that best can reduce the (large) illumination cological footprint. Europe and more specifically Denmark, a country......20% of the total electricity produced in the world today is used for illumination. Though the use of energy in Europe almost stagnated during the 1990ies, studies reveal that for the next 30 years the consumption of electricity will again increase making the 20% reduction of CO2 goal almost...... are the main possibilities and limitations for the Danish lighting Industry to help reducing the global illumination ecological footprint and what can be improved in the current illumination value chain in order to use the possibilities?...

  17. Analysis of Search Results for the Clarification and Identification of Technology Emergence (AR-CITE)

    Energy Technology Data Exchange (ETDEWEB)

    Abercrombie, Robert K [ORNL; Schlicher, Bob G [ORNL; Sheldon, Frederick T [ORNL

    2013-01-01

    This work examines a scientometric model that clarifies and identifies the technology of emergence from initial discovery (via original scientific and conference literature), through critical discoveries(via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. The purpose of this study therefore, is to address the relationships among multiple disparate sources of information as a way to explain systematically the emergence of new technologies from innovation on through to commercial application. In one example, we investigate the combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, patents, news archives, and on-line mapping networks) as they are assembled to become one collective network (a data set for analysis of relations). In another example, we investigate the combinations of five distinct sources (i.e., university R&D, industry R&D, product emergence, and two levels of annual market revenue [$1B and $10B]). These established networks and relationship become the basis from which to quickly analyze the temporal flow of activity (searchable events) for multiple example subject domains we investigated.

  18. Emerging technology becomes an opportunity for EOS

    Science.gov (United States)

    Fargion, Giulietta S.; Harberts, Robert; Masek, Jeffrey G.

    1996-11-01

    During the last decade, we have seen an explosive growth in our ability to collect and generate data. When implemented, NASA's Earth observing system data information system (EOSDIS) will receive about 50 gigabytes of remotely sensed image data per hour. This will generate an urgent need for new techniques and tools that can automatically and intelligently assist in transforming this abundance of data into useful knowledge. Some emerging technologies that address these challenges include data mining and knowledge discovery in databases (KDD). The most basic data mining application is a content-based search (examples include finding images of particular meteorological phenomena or identifying data that have been previously mined or interpreted). In order that these technologies be effectively exploited for EOSDIS development, a better understanding of data mining and the requirements for using this technology is necessary. The authors are currently undertaking a project exploring the requirements and options of content-based search and data mining for use on EOSDIS. The scope of the project is to develop a prototype with which to investigate user interface concepts, requirements, and designs relevant for EOSDIS core system (ECS) subsystem utilizing these techniques. The goal is to identify a generic handling of these functions. This prototype will help identify opportunities which the earth science community and EOSDIS can use to meet the challenges of collecting, searching, retrieving, and interacting with abundant data resources in highly productive ways.

  19. A review of emerging non-volatile memory (NVM) technologies and applications

    Science.gov (United States)

    Chen, An

    2016-11-01

    This paper will review emerging non-volatile memory (NVM) technologies, with the focus on phase change memory (PCM), spin-transfer-torque random-access-memory (STTRAM), resistive random-access-memory (RRAM), and ferroelectric field-effect-transistor (FeFET) memory. These promising NVM devices are evaluated in terms of their advantages, challenges, and applications. Their performance is compared based on reported parameters of major industrial test chips. Memory selector devices and cell structures are discussed. Changing market trends toward low power (e.g., mobile, IoT) and data-centric applications create opportunities for emerging NVMs. High-performance and low-cost emerging NVMs may simplify memory hierarchy, introduce non-volatility in logic gates and circuits, reduce system power, and enable novel architectures. Storage-class memory (SCM) based on high-density NVMs could fill the performance and density gap between memory and storage. Some unique characteristics of emerging NVMs can be utilized for novel applications beyond the memory space, e.g., neuromorphic computing, hardware security, etc. In the beyond-CMOS era, emerging NVMs have the potential to fulfill more important functions and enable more efficient, intelligent, and secure computing systems.

  20. New technologies in predicting, preventing and controlling emerging infectious diseases.

    Science.gov (United States)

    Christaki, Eirini

    2015-01-01

    Surveillance of emerging infectious diseases is vital for the early identification of public health threats. Emergence of novel infections is linked to human factors such as population density, travel and trade and ecological factors like climate change and agricultural practices. A wealth of new technologies is becoming increasingly available for the rapid molecular identification of pathogens but also for the more accurate monitoring of infectious disease activity. Web-based surveillance tools and epidemic intelligence methods, used by all major public health institutions, are intended to facilitate risk assessment and timely outbreak detection. In this review, we present new methods for regional and global infectious disease surveillance and advances in epidemic modeling aimed to predict and prevent future infectious diseases threats.

  1. Optimization of the silicon subcell for III-V on silicon multijunction solar cells: Key differences with conventional silicon technology

    Science.gov (United States)

    García-Tabarés, Elisa; Martín, Diego; García, Iván; Lelièvre, Jean François; Rey-Stolle, Ignacio

    2012-10-01

    Dual-junction solar cells formed by a GaAsP or GaInP top cell and a silicon (Si) bottom cell seem to be attractive candidates to materialize the long sought-for integration of III-V materials on Si for photovoltaic (PV) applications. Such integration would offer a cost breakthrough for PV technology, unifying the low cost of Si and the efficiency potential of III-V multijunction solar cells. The optimization of the Si solar cells properties in flat-plate PV technology is well-known; nevertheless, it has been proven that the behavior of Si substrates is different when processed in an MOVPE reactor In this study, we analyze several factors influencing the bottom subcell performance, namely, 1) the emitter formation as a result of phosphorus diffusion; 2) the passivation quality provided by the GaP nucleation layer; and 3) the process impact on the bottom subcell PV properties.

  2. Emerging information technologies in accounting and related security risks – what is the impact on the Romanian accounting profession

    Directory of Open Access Journals (Sweden)

    Sînziana-Maria Rîndașu

    2017-12-01

    Full Text Available This study investigates whether aspiring and professional accountants understand the benefits and security challenges brought by emerging technologies such as: Big Data, data analytics, cloud computing and mobile technologies. 115 participants took part in a survey during January and February 2017, all having at least one year of practical experience in accounting or audit and 80% of them being affiliated with national or international accounting professional bodies. The research has three key findings: (1 Professional accountants and auditors are having in average a theoretical knowledge of the emerging technologies in the accounting field, but they still need to enhance their skills to exploit them efficiently, (2 Mobile technologies started to be adopted by the Romanian practitioners and (3 The profession has become aware of the security risks brought by emerging technologies in the digital accounting. The accounting profession is on the verge of change and the practitioners do not yet possess sufficient skills regarding the analyzed emerging technologies. As per this, the professional bodies and academic environment should reassess their curricula to enforce the necessary changes for preparing practitioners to successfully face the future challenges and avoid their replacement by other professions more qualified.

  3. Emerging technologies for high performance infrared detectors

    Science.gov (United States)

    Tan, Chee Leong; Mohseni, Hooman

    2018-01-01

    Infrared photodetectors (IRPDs) have become important devices in various applications such as night vision, military missile tracking, medical imaging, industry defect imaging, environmental sensing, and exoplanet exploration. Mature semiconductor technologies such as mercury cadmium telluride and III-V material-based photodetectors have been dominating the industry. However, in the last few decades, significant funding and research has been focused to improve the performance of IRPDs such as lowering the fabrication cost, simplifying the fabrication processes, increasing the production yield, and increasing the operating temperature by making use of advances in nanofabrication and nanotechnology. We will first review the nanomaterial with suitable electronic and mechanical properties, such as two-dimensional material, graphene, transition metal dichalcogenides, and metal oxides. We compare these with more traditional low-dimensional material such as quantum well, quantum dot, quantum dot in well, semiconductor superlattice, nanowires, nanotube, and colloid quantum dot. We will also review the nanostructures used for enhanced light-matter interaction to boost the IRPD sensitivity. These include nanostructured antireflection coatings, optical antennas, plasmonic, and metamaterials.

  4. A Legal Analysis of Federal Disability Law as Related to Emerging Technology: Guidelines for Postsecondary Leadership, Policy, and Practice

    Science.gov (United States)

    Ford, Roderick Dwayne

    2014-01-01

    This dissertation identified and described the legal requirements imposed by federal disability mandates and case law related to emerging technology. Additionally, the researcher created a legal framework (guidelines) for higher education institutions to consider during policy development and implementation of emerging technology by providing an…

  5. Techno-experiential design assessment and media experience database: A method for emerging technology assessment

    OpenAIRE

    Schick, Dan

    2005-01-01

    This thesis evaluates the Techno-Experiential Design Assessment (TEDA) for social research on new media and emerging technology. Dr. Roman Onufrijchuk developed TEDA to address the shortcomings of current methods designed for studying existing technologies. Drawing from the ideas of Canadian media theorist Marshall McLuhan, TEDA focuses on the environmental changes introduced by a new technology into a user's life. I describe the key components of the TEDA methodology and provide examples of ...

  6. An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies

    Science.gov (United States)

    Kostiuk, Peter F.; Adams, Milton B.; Allinger, Deborah F.; Rosch, Gene; Kuchar, James

    1998-01-01

    The continuing growth of air traffic will place demands on NASA's Air Traffic Management (ATM) system that cannot be accommodated without the creation of significant delays and economic impacts. To deal with this situation, work has begun to develop new approaches to providing a safe and economical air transportation infrastructure. Many of these emerging air transport technologies will represent radically new approaches to ATM, both for ground and air operations.

  7. A comparison of digital mammography detectors and emerging technology

    International Nuclear Information System (INIS)

    Diffey, J.L.

    2015-01-01

    The overall diagnostic accuracy of digital mammography in the context of screening has been shown to be similar or slightly better than screen-film mammography. However, digital mammography encompasses both Computed Radiography (CR) and integrated Digital Radiography (DR) and there is increasing evidence to suggest that differences in detector technology are associated with variations in cancer detection rate, dose and image quality. These differences are examined in detail. Although digital mammography offers many advantages compared to screen-film, there are still some limitations with its use as a screening tool and reduced cancer detection in dense breasts remains an issue. Digital mammography detectors have paved the way for emerging technologies which may offer improvements. Taking the definition of mammography to only include X-ray imaging of the breast, this article focuses on tomosynthesis, contrast-enhanced digital mammography, stereoscopic mammography and dedicated breast computed tomography. Advanced software applications such as Computed Aided Detection (CAD) and quantitative breast density assessment are also presented. The benefits and limitations of each technique are discussed. - Highlights: • Digital detector technology affects cancer detection rate, dose and image quality. • Digital detectors have facilitated new technologies such as tomosynthesis. • 3-D techniques reduce superimposition and increase cancer detection in dense breasts. • Contrast-enhanced mammography demonstrates improved sensitivity and specificity.

  8. Guide to treatment technology for contaminated soils

    International Nuclear Information System (INIS)

    Tran, H.; Aylward, R.

    1992-01-01

    This document is a guide for the screening of alternative treatment technologies for contaminated soils. The contents of this guide are organized into: 1. Introduction, II. Utilizing the table, III. Tables: Contamination Versus Technology, TV. Contaminant Waste Groups, and V. References. The four Contaminations Versus Technology tables are designed to identify the effectiveness and/or potential applicability of technologies to some or all compounds within specific waste groups. The tables also present limitations and special use considerations for the particular treatment technology. The phase of development of the technology is also included in the table. The phases are: Available, Innovative, and Emerging technologies. The technologies presented in this guide are organized according to the method of treatment. The four (4) treatment methods are Biological, Solidification/Stabilization, Thermal, and Chemical/Physical Treatment. There are several processing methods; some are well developed and proven, and others are in the development stage

  9. Soil and groundwater cleanup: benefits and limits of emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Caliman, Florentina Anca; Robu, Brindusa Mihaela; Smaranda, Camelia; Pavel, Vasile Lucian; Gavrilescu, Maria [Technical University of Iasi, Department of Environmental Engineering and Management, Faculty of Chemical Engineering and Environmental Protection, Iasi (Romania)

    2011-04-15

    Contaminated soil and groundwater have been the subject of study and research, so that the field of remediation has grown and evolved, continually developing and adopting new technologies in attempts to improve the decontamination. The cleanup of environmental pollution involves a variety of techniques, ranging from simple biological processes to advanced engineering technologies. Cleanup activities may also address a wide range of contaminants. This article is a short analysis of the technologies for cleaning up groundwater and soil, highlighting knowledge and information gaps. Challenges and strategies for cleaning up different types of contaminants, mainly heavy metals and persistent organic compounds are described. Included are technologies that treat ground water contaminants in place in the subsurface and soil technologies that treat the soil either in place or on site in a treatment unit. Emerging technologies such as those based on oxidation-reduction, bioremediation, and nanotechnologies are covered. It is evident that for a good efficiency of remediation, techniques or even whole new technologies may be incorporated into an existing technology as a treatment train, improving its performance or overcome limitations. Several economic and decision-making elements are developed in the final part, based on the analysis carried out throughout the article. The work highlights the fact that excellence in research and technology progress could be attained by the development of technologies to deal more effectively and economically with certain toxic contaminants such as heavy metals, volatile organic compounds, and persistent organic pollutants, associated with optimization of technologies under field remediation conditions and requirements, improving capacity and yields, and reducing costs. Moreover, increasing knowledge of the scope and problem of equipment development could improve the benefits. (orig.)

  10. Tethered Balloon Technology in Design Solutions for Rescue and Relief Team Emergency Communication Services.

    Science.gov (United States)

    Alsamhi, Saeed Hamood; Ansari, Mohd Samar; Ma, Ou; Almalki, Faris; Gupta, Sachin Kumar

    2018-05-23

    The actions taken at the initial times of a disaster are critical. Catastrophe occurs because of terrorist acts or natural hazards which have the potential to disrupt the infrastructure of wireless communication networks. Therefore, essential emergency functions such as search, rescue, and recovery operations during a catastrophic event will be disabled. We propose tethered balloon technology to provide efficient emergency communication services and reduce casualty mortality and morbidity for disaster recovery. The tethered balloon is an actively developed research area and a simple solution to support the performance, facilities, and services of emergency medical communication. The most critical requirement for rescue and relief teams is having a higher quality of communication services which enables them to save people's lives. Using our proposed technology, it has been reported that the performance of rescue and relief teams significantly improved. OPNET Modeler 14.5 is used for a network simulated with the help of ad hoc tools (Disaster Med Public Health Preparedness. 2018;page 1 of 8).

  11. American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee report on electronic brachytherapy.

    Science.gov (United States)

    Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E

    2010-03-15

    The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site. Copyright 2010. Published by Elsevier Inc.

  12. Quantifying the Modern City: Emerging Technologies and Big Data for Active Living Research

    Directory of Open Access Journals (Sweden)

    Deepti Adlakha

    2017-05-01

    Full Text Available Opportunities and infrastructure for active living are an important aspect of a community’s design, livability, and health. Features of the built environment influence active living and population levels of physical activity, but objective study of the built environment influence on active living behaviors is challenging. The use of emerging technologies for active living research affords new and promising means to obtain objective data on physical activity behaviors and improve the precision and accuracy of measurements. This is significant for physical activity promotion because precise measurements can enable detailed examinations of where, when, and how physical activity behaviors actually occur, thus enabling more effective targeting of particular behavior settings and environments. The aim of this focused review is to provide an overview of trends in emerging technologies that can profoundly change our ability to understand environmental determinants of active living. It discusses novel technological approaches and big data applications to measure and track human behaviors that may have broad applications across the fields of urban planning, public health, and spatial epidemiology.

  13. Exploring the potential of video technologies for collaboration in emergency medical care

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.; Söderholm, Hanna M.; Manning, James E.

    2008-01-01

    videoconferencing techniques. This may be of benefit in diagnosing and treating patients in emergency situations where specialized medical expertise is not locally available. The 3D telepresence technology does not yet exist, and there is a need to understand its potential before resources are spent on its...

  14. X-ray inspection in the aerospace industry - state of the art, challenges, and emerging technologies

    International Nuclear Information System (INIS)

    Mohr, G.A.; Fock, T.

    2004-01-01

    The desire to non-destructively determine the quality and integrity of materials and structures has a long history in the aerospace industry. Through the entire life cycle of aircraft products and components, X-ray inspection technologies play a major role with continuously increasing demand. The requirements for X-ray inspections are continuing to be driven by the need of lower cost methods and solutions with greater reliability, sensitivity, user friendliness and high operation speed as well as applicability of new materials and structures. The presentation will summarize the status of radiographic and radioscopic X-ray inspection technologies in the aerospace industry while showing how X-ray inspection solutions respond to these requirements. Furthermore emerging inspection challenges will be identified and emerging X-ray inspection technologies will be reviewed. (author)

  15. Profiling microbial lignocellulose degradation and utilization by emergent omics technologies.

    Science.gov (United States)

    Rosnow, Joshua J; Anderson, Lindsey N; Nair, Reji N; Baker, Erin S; Wright, Aaron T

    2017-08-01

    The use of plant materials to generate renewable biofuels and other high-value chemicals is the sustainable and preferable option, but will require considerable improvements to increase the rate and efficiency of lignocellulose depolymerization. This review highlights novel and emerging technologies that are being developed and deployed to characterize the process of lignocellulose degradation. The review will also illustrate how microbial communities deconstruct and metabolize lignocellulose by identifying the necessary genes and enzyme activities along with the reaction products. These technologies include multi-omic measurements, cell sorting and isolation, nuclear magnetic resonance spectroscopy (NMR), activity-based protein profiling, and direct measurement of enzyme activity. The recalcitrant nature of lignocellulose necessitates the need to characterize the methods microbes employ to deconstruct lignocellulose to inform new strategies on how to greatly improve biofuel conversion processes. New technologies are yielding important insights into microbial functions and strategies employed to degrade lignocellulose, providing a mechanistic blueprint in order to advance biofuel production.

  16. Relationship between organizational climate and burnout syndrome in the emergency service of a hospital Category III-2. Lima, Peru 2015

    Directory of Open Access Journals (Sweden)

    Zenaida Solís Chuquiyaur

    2016-04-01

    Full Text Available Objective: To determine the relationship between organizational climate and Burnout Syndrome among nursing professionals of the Emergency Service in a Hospital Category III-2. Material and methods: quantitative, prospective, correlational cross-sectional study. The sample consisted of 43 nurses, using a non-probability sampling for convenience. For analysis and study of the variables, Rensis Likert scale and Maslach Burnout Inventory were used. Results: The organizational climate was average level (81.4% followed by a high level (18.6% and the Burnout Syndrome corresponds to low level (86% and medium (14% level. The relationship between organizational climate and Burnout Syndrome was low (rho = -0.11. Conclusions: In the Emergency Service, the level of organizational climate was fairly favorable with absence of Burnout Syndrome among nursing professionals. There is not significant relationship between the two variables.

  17. U.S. DOE Roundtable and Workshop on Advanced Steel Technologies: Emerging Global Technologies and R&D Opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Pellegrino, Joan [Energetics, Inc., Columbia, MD (United States); Jamison, Keith [Energetics, Inc., Columbia, MD (United States)

    2015-12-01

    This report is based on the proceedings of the U.S. DOE Roundtable and Workshop on Advanced Steel Technologies Workshop hosted by Oak Ridge National Laboratory (ORNL) in cooperation with the U.S. Department of Energy s (DOE s) Advanced Manufacturing Office (AMO) on held on June 23, 2015. Representatives from industry, government, and academia met at the offices of the National Renewable Energy Laboratory in Washington, DC, to share information on emerging steel technologies, issues impacting technology investment and deployment, gaps in research and development (R&D), and opportunities for greater energy efficiency. The results of the workshop are summarized in this report. They reflect a snapshot of the perspectives and ideas generated by the individuals who attended and not all-inclusive of the steel industry and stakeholder community.

  18. A survey of the knowledge, use, and adoption of emerging technologies by academics in an Open Distance Learning environment

    Directory of Open Access Journals (Sweden)

    B Chimbo

    2014-07-01

    Full Text Available The realisation of the advantages offered by e-learning accompanied by the use of various emerging information technologies has resulted in a noticeable shift by academia towards e-learning. An analysis of the use, knowledge and adoption of emerging technologies by academics in an Open Distance Learning (ODL environment at the University of South Africa (UNISA was undertaken in this study. The aim of the study was to evaluate the use, knowledge and adoption of emerging e-learning technologies by the academics from the selected schools. The academics in the Schools of Arts, Computing and Science were purposively selected in order to draw on views of academics from different teaching and educational backgrounds. Questionnaires were distributed both electronically and manually. The results showed that academics in all the Schools were competent at the use of information technology tools and applications such as emailing, word-processing, Internet, myUnisa (UNISA’s online teaching platform, and Microsoft PowerPoint and Excel. An evaluation of the awareness of different emerging technological tools showed that most academics were aware of Open Access Technologies, Social Networking Sites, Blogs, Video Games and Microblogging Platforms. While the level of awareness was high for these technologies, the use by the academics was low. At least 62.3% of the academics indicated willingness to migrate to online teaching completely and also indicated the need for further training on new technologies. A comparison of the different schools showed no statistically significant difference in the use, knowledge and willingness to adopt technology amongst the academics.

  19. Facilitating Factors and Barriers to the Use of Emerging Technologies for Suicide Prevention in Europe: Multicountry Exploratory Study.

    Science.gov (United States)

    Muñoz-Sánchez, Juan-Luis; Delgado, Carmen; Parra-Vidales, Esther; Franco-Martín, Manuel

    2018-01-24

    This study provides an analysis on the use of emerging technologies for the prevention of suicide in 8 different European countries. The objective of this study was to analyze the potentiality of using emerging technologies in the area of suicide prevention based on the opinion of different professionals involved in suicide prevention. Opinions of 3 groups of stakeholders (ie, relevant professionals in suicide field) were gathered using a specifically designed questionnaire to explore dimensions underlying perceptions of facilitating factors and barriers in relation to the use of emerging technologies for suicide prevention. Goal 1 involved facilitating factors for the use of emerging technologies in suicide prevention. Northern European countries, except for Belgium, attach greater relevance to those that optimize implementation and benefits. On the other hand, Southern European countries attach greater importance to professionally oriented and user-centered facilitating factors. According to different stakeholders, the analysis of these facilitating factors suggest that professionals in the field of social work attach greater relevance to those that optimize implementation and benefits. However, professionals involved in the area of mental health, policy makers, and political decision makers give greater importance to professionally oriented and user-centered facilitating factors. Goal 2 was related to barriers to the usability of emerging technologies for suicide prevention. Both countries and stakeholders attach greater importance to barriers associated with resource constraints than to those centered on personal limitations. There are no differences between countries or between stakeholders. Nevertheless, there is a certain stakeholders-countries interaction that indicates that the opinions on resource constraints expressed by different stakeholders do not follow a uniform pattern in different countries, but they differ depending on the country. Although all

  20. Facilitating Factors and Barriers to the Use of Emerging Technologies for Suicide Prevention in Europe: Multicountry Exploratory Study

    Science.gov (United States)

    Delgado, Carmen; Sánchez-Prada, Andrés; Parra-Vidales, Esther; de Leo, Diego; Franco-Martín, Manuel

    2018-01-01

    Background This study provides an analysis on the use of emerging technologies for the prevention of suicide in 8 different European countries. Objective The objective of this study was to analyze the potentiality of using emerging technologies in the area of suicide prevention based on the opinion of different professionals involved in suicide prevention. Methods Opinions of 3 groups of stakeholders (ie, relevant professionals in suicide field) were gathered using a specifically designed questionnaire to explore dimensions underlying perceptions of facilitating factors and barriers in relation to the use of emerging technologies for suicide prevention. Results Goal 1 involved facilitating factors for the use of emerging technologies in suicide prevention. Northern European countries, except for Belgium, attach greater relevance to those that optimize implementation and benefits. On the other hand, Southern European countries attach greater importance to professionally oriented and user-centered facilitating factors. According to different stakeholders, the analysis of these facilitating factors suggest that professionals in the field of social work attach greater relevance to those that optimize implementation and benefits. However, professionals involved in the area of mental health, policy makers, and political decision makers give greater importance to professionally oriented and user-centered facilitating factors. Goal 2 was related to barriers to the usability of emerging technologies for suicide prevention. Both countries and stakeholders attach greater importance to barriers associated with resource constraints than to those centered on personal limitations. There are no differences between countries or between stakeholders. Nevertheless, there is a certain stakeholders-countries interaction that indicates that the opinions on resource constraints expressed by different stakeholders do not follow a uniform pattern in different countries, but they differ

  1. Seizing the strategic opportunities of emerging technologies by building up innovation system: monoclonal antibody development in China.

    Science.gov (United States)

    Zhang, Mao-Yu; Li, Jian; Hu, Hao; Wang, Yi-Tao

    2015-11-04

    Monoclonal antibodies (mAbs), as an emerging technology, have become increasingly important in the development of human therapeutic agents. How developing countries such as China could seize this emerging technological opportunity remains a poorly studied issue in prior literature. Thus, this paper aims to investigate the research and development of mAbs in China based on an innovation system functions approach and probes into the question of how China has been taking advantage of emerging technologies to overcome its challenges of building up a complete innovation system in developing mAbs. Mixed research methods were applied by combining archival data and field interviews. Archival data from the China Food and Drug Administration, Web of Science, the United States Patent and Trademark Office, the Chinese Clinical Trial Registry, and the National Science and Technology Report Service were used to examine the status quo of the technology and research and development (R&D) activities in China, while the opinions of researchers and managers in this field were synthesized from the interviews. From the perspective of innovation system functions, technological development of mAb in China is being driven by incentives such as the subsidies from the State and corporate R&D funding. Knowledge diffusion has been well served over the last 10 years through exchanging information on networks and technology transfer with developed countries. The State has provided clear guidance on search of emerging mAb technologies. Legitimacy of mAb in China has gained momentum owing to the implementation of government policies stipulated in the "The Eleventh Five-year Plan" in 2007, as well as national projects such as the "973 Program" and "863 Program", among others. The potential of market formation stays high because of the rising local demand and government support. Entrepreneurial activities for mAb continue to prosper. In addition, the situation of resource supply has been improved

  2. Ideas Production in Emerging Economies

    OpenAIRE

    Luintel, Kul B; Kahn, Mosahid

    2012-01-01

    We model 'new ideas' production in a panel of 17 emerging countries. Our results reveal: (i) ideas production is duplicative, (ii) externality associated with domestic knowledge stocks is of above unit factor proportionality, (iii) OECD countries raise the innovation-bar for emerging countries, (iv) there is no significant knowledge diffusion across emerging countries, and (v) growth in emerging countries appear far from a balanced growth path.

  3. Overview of established and emerging treatment technologies for polycyclic aromatic hydrocarbons at wood preserving facilities

    International Nuclear Information System (INIS)

    Shearon, M.D.

    1992-01-01

    The contamination of soil and groundwater by polycyclic aromatic hydrocarbons (PAHs) is common to wood preserving facilities and manufactured gas plants. Since the inception of RCRA and CERCLA, much attention has been focused upon the remediation of both active and defunct wood preserving facilities. The experiences gleaned from the use of proven technologies, and more importantly, the lessons being learned in the trials of emerging technologies on creosote-derived PAH clean-ups at wood preserving sites, should have direct bearing on the clean-up of similar contaminants at MGP sites. In this paper, a review of several remedial actions using waste removal/disposal, on-site incineration, and bioremediation will be presented. Additionally, emerging technologies for the treatment of PAH-contaminated soil and water will be reviewed. Lastly, recent information on risk assessment results for creosote sites and treated PAH waste will be discussed

  4. The role of Ce(III) in BZ oscillating reactions

    Science.gov (United States)

    Nogueira, Paulo A.; Varela, Hamilton; Faria, Roberto B.

    2012-03-01

    Herein we present results on the oscillatory dynamics in the bromate-oxalic acid-acetone-Ce(III)/Ce(IV) system in batch and also in a CSTR. We show that Ce(III) is the necessary reactant to allow the emergence of oscillations. In batch, oscillations occur with Ce(III) and also with Ce(IV), but no induction period is observed with Ce(III). In a CSTR, no oscillations were found using a freshly prepared Ce(IV), but only when the cerium-containing solution was aged, allowing partial conversion of Ce(IV) to Ce(III) by reaction with acetone.

  5. Early economic evaluation of emerging health technologies: protocol of a systematic review

    Science.gov (United States)

    2014-01-01

    Background The concept of early health technology assessment, discussed well over a decade, has now been collaboratively implemented by industry, government, and academia to select and expedite the development of emerging technologies that may address the needs of patients and health systems. Early economic evaluation is essential to assess the value of emerging technologies, but empirical data to inform the current practice of early evaluation is limited. We propose a systematic review of early economic evaluation studies in order to better understand the current practice. Methods/design This protocol describes a systematic review of economic evaluation studies of regulated health technologies in which the evaluation is conducted prior to regulatory approval and when the technology effectiveness is not well established. Included studies must report an economic evaluation, defined as the comparative analysis of alternatives with respect to their associated costs and health consequences, and must evaluate some regulated health technology such as pharmaceuticals, biologics, high-risk medical devices, or biomarkers. We will conduct the literature search on multiple databases, including MEDLINE, EMBASE, the Centre for Reviews and Dissemination Databases, and EconLit. Additional citations will be identified via scanning reference lists and author searching. We suspect that many early economic evaluation studies are unpublished, especially those conducted for internal use only. Additionally, we use a chain-referral sampling approach to identify authors of unpublished studies who work in technology discovery and development, starting out with our contact lists and authors who published relevant studies. Citation screening and full-text review will be conducted by pairs of reviewers. Abstracted data will include those related to the decision context and decision problem of the early evaluation, evaluation methods (e.g., data sources, methods, and assumptions used to

  6. Radical and Incremental Innovation Preferences in Information Technology: An Empirical Study in an Emerging Economy

    Directory of Open Access Journals (Sweden)

    Tarun K. Sen

    2011-11-01

    Full Text Available Radical and Incremental Innovation Preferences in Information Technology: An Empirical Study in an Emerging Economy Abstract Innovation in information technology is a primary driver for growth in developed economies. Research indicates that countries go through three stages in the adoption of innovation strategies: buying innovation through global trade, incremental innovation from other countries by enhancing efficiency, and, at the most developed stage, radically innovating independently for competitive advantage. The first two stages of innovation maturity depend more on cross-border trade than the third stage. In this paper, we find that IT professionals in in an emerging economy such as India believe in radical innovation over incremental innovation (adaptation as a growth strategy, even though competitive advantage may rest in adaptation. The results of the study report the preference for innovation strategies among IT professionals in India and its implications for other rapidly growing emerging economies.

  7. Exploring Rare Earths supply constraints for the emerging clean energy technologies and the role of recycling

    DEFF Research Database (Denmark)

    Habib, Komal; Wenzel, Henrik

    The dependency on critical resources like Rare Earth Elements (REEs) has been pronounced as a potential barrier to a broader implementation of emerging renewable energy technologies. This study explores the dependency of such technologies especially wind turbines and electric vehicles along with ...

  8. Leveraging Emerging Technologies in Outreach for JWST

    Science.gov (United States)

    Meinke, Bonnie K.; Green, Joel D.; Smith, Louis Chad; Smith, Denise A.; Lawton, Brandon L.; Gough, Michael

    2017-10-01

    The James Webb Space Telescope (JWST) is NASA’s next great observatory, launching in October 2018. How will we maintain the prestige and cultural impact of the Hubble Space Telescope as the torch passes to Webb? Emerging technologies such as augmented (AR) and virtual reality (VR) bring the viewer into the data and introduce the telescope in previously unimaginable immersive detail. Adoption of mobile devices, many of which easily support AR and VR, has expanded access to information for wide swaths of the public. From software like Worldwide Telescope to hardware like the HTC Vive, immersive environments are providing new avenues for learning. If we develop materials properly tailored to these media, we can reach more diverse audiences than ever before. STScI is piloting tools related to JWST to showcase at DPS, and in local events, which I highlight here.

  9. From lagging to leading? Technological innovation systems in emerging economies and the case of Chinese wind power

    International Nuclear Information System (INIS)

    Gosens, Jorrit; Lu, Yonglong

    2013-01-01

    There is increasing attention for the contribution of emerging economies to global innovation, including innovation of renewable energy technologies. The Technological Innovation Systems (TIS) framework presents a list of system functions for the analysis of the development of a technology. It has often been applied to renewable energy technologies, but with a strong focus on advanced economies. In this paper, we elaborate on emerging economy innovation system formation, structured according to TIS functions. Rather than analysing development of the technology, we analyse the development of the Chinese TIS vis-à-vis the global forefront. Key to this notion is that TIS, especially for clean-tech, are transnational phenomena. Lagging TIS depend on the global TIS, whereas leading TIS contribute to its formation. It is concluded that China has reduced its dependence on foreign knowledge and investment, but the outward contribution remains limited. The main challenge to foreign market expansion lies in reforming the domestic TIS to focus on turbine quality rather than cost reduction. Demonstration projects are needed, especially for large capacity and offshore turbine models, in order to build up operational history and get quality certification. - Highlights: • The TIS framework was adapted to suit emerging economy case studies. • China's wind power TIS is emerging vis-à-vis the global forefront. • China's wind power TIS has reduced its dependence on foreign knowledge and finance. • Chinese innovative activity for wind power remains limited to the domestic context. • Foreign market expansion requires a focus on turbine quality and certification

  10. Emerging technologies for telemedicine.

    Science.gov (United States)

    Cao, Minh Duc; Minh, Cao Duc; Shimizu, Shuji; Antoku, Yasuaki; Torata, Nobuhiro; Kudo, Kuriko; Okamura, Koji; Nakashima, Naoki; Tanaka, Masao

    2012-01-01

    This paper focuses on new technologies that are practically useful for telemedicine. Three representative systems are introduced: a Digital Video Transport System (DVTS), an H.323 compatible videoconferencing system, and Vidyo. Based on some of our experiences, we highlight the advantages and disadvantages of each technology, and point out technologies that are especially targeted at doctors and technicians, so that those interested in using similar technologies can make appropriate choices and achieve their own goals depending on their specific conditions.

  11. Emerging Technologies for Telemedicine

    Energy Technology Data Exchange (ETDEWEB)

    Minh, Cao Duc [National Agency for Science and Technology Information, Hanoi (Viet Nam); Shimizu, Shuji; Antoku, Yasuaki; Torata, Nobuhiro; Kudo, Kuriko; Okamura, Koji; Nakashima, Naoki; Tanaka, Masao [Kyushu University Hospital, Fukuoka (Japan)

    2012-02-15

    This paper focuses on new technologies that are practically useful for telemedicine. Three representative systems are introduced: a Digital Video Transport System (DVTS), an H.323 compatible videoconferencing system, and Vidyo. Based on some of our experiences, we highlight the advantages and disadvantages of each technology, and point out technologies that are especially targeted at doctors and technicians, so that those interested in using similar technologies can make appropriate choices and achieve their own goals depending on their specific conditions.

  12. Emerging Technologies for Telemedicine

    International Nuclear Information System (INIS)

    Minh, Cao Duc; Shimizu, Shuji; Antoku, Yasuaki; Torata, Nobuhiro; Kudo, Kuriko; Okamura, Koji; Nakashima, Naoki; Tanaka, Masao

    2012-01-01

    This paper focuses on new technologies that are practically useful for telemedicine. Three representative systems are introduced: a Digital Video Transport System (DVTS), an H.323 compatible videoconferencing system, and Vidyo. Based on some of our experiences, we highlight the advantages and disadvantages of each technology, and point out technologies that are especially targeted at doctors and technicians, so that those interested in using similar technologies can make appropriate choices and achieve their own goals depending on their specific conditions.

  13. Enhancing the Use of Vehicle Alcohol Interlocks With Emerging Technology.

    Science.gov (United States)

    Voas, Robert B

    2014-01-01

    Among the earliest applications of health technologies to a safety program was the development of blood alcohol content (BAC) tests for use in impaired-driving enforcement. This led to the development of miniature, highly accurate devices that officers could carry in their pockets. A natural extension of this technology was the vehicle alcohol interlock, which is used to reduce recidivism among drivers convicted of driving under the influence (DUI) by requiring them to install the devices (which will not allow someone with a positive BAC to drive) on their vehicles. While on the vehicle, interlocks have been shown to reduce recidivism by two-thirds. Use of these devices has been growing at the rate of 10 to 15 percent a year, and there currently are more than 300,000 units in use. This expansion in the application of interlocks has benefited from the integration of other emerging technologies into interlock systems. Such technologies include data systems that record both driver actions and vehicle responses, miniature cameras and face recognition to identify the user, Wi-Fi systems to provide rapid reporting on offender performance and any attempt to circumvent the device, GPS tracking of the vehicle, and more rapid means for monitoring the integrity of the interlock system. This article describes how these health technologies are being applied in interlock programs and the outlook for new technologies and new court sanctioning programs that may influence the growth in the use of interlocks in the future.

  14. Integrating emerging earth science technologies into disaster risk management: an enterprise architecture approach

    Science.gov (United States)

    Evans, J. D.; Hao, W.; Chettri, S. R.

    2014-12-01

    Disaster risk management has grown to rely on earth observations, multi-source data analysis, numerical modeling, and interagency information sharing. The practice and outcomes of disaster risk management will likely undergo further change as several emerging earth science technologies come of age: mobile devices; location-based services; ubiquitous sensors; drones; small satellites; satellite direct readout; Big Data analytics; cloud computing; Web services for predictive modeling, semantic reconciliation, and collaboration; and many others. Integrating these new technologies well requires developing and adapting them to meet current needs; but also rethinking current practice to draw on new capabilities to reach additional objectives. This requires a holistic view of the disaster risk management enterprise and of the analytical or operational capabilities afforded by these technologies. One helpful tool for this assessment, the GEOSS Architecture for the Use of Remote Sensing Products in Disaster Management and Risk Assessment (Evans & Moe, 2013), considers all phases of the disaster risk management lifecycle for a comprehensive set of natural hazard types, and outlines common clusters of activities and their use of information and computation resources. We are using these architectural views, together with insights from current practice, to highlight effective, interrelated roles for emerging earth science technologies in disaster risk management. These roles may be helpful in creating roadmaps for research and development investment at national and international levels.

  15. Nano-ethics as NEST-ethics: Patterns of Moral Argumentation About New and Emerging Science and Technology

    NARCIS (Netherlands)

    Swierstra, Tsjalling; Rip, Arie

    2007-01-01

    There might not be a specific nano-ethics, but there definitely is an ethics of new & emerging science and technology (NEST), with characteristic tropes and patterns of moral argumentation. Ethical discussion in and around nanoscience and technology reflects such NEST-ethics. We offer an inventory

  16. Design and Implementation of an Emergency Vehicle Signal Preemption System Based on Cooperative Vehicle-Infrastructure Technology

    OpenAIRE

    Yinsong Wang; Zhizhou Wu; Xiaoguang Yang; Luoyi Huang

    2013-01-01

    Emergency vehicle is an important part of traffic flow. The efficiency, reliability, and safety of emergency vehicle operations dropped due to increasing traffic congestion. With the advancement of the wireless communication technologies and the development of the vehicle-to-vehicle (v2v) and vehicle-to-infrastructure (v2i) systems, called Cooperative Vehicle-Infrastructure System (CVIS), there is an opportunity to provide appropriate traffic signal preemption for emergency vehicle based on r...

  17. Joint research and development and exchange of technology on toxic material emergency response between LLNL and ENEA. 1985 progress report

    International Nuclear Information System (INIS)

    Dickerson, M.H.; Caracciolo, R.

    1986-01-01

    For the past six years, the US Department of Energy, LLNL, and the ENEA, Rome, Italy, have participated in cooperative studies for improving a systems approach to an emergency response following nuclear accidents. Technology exchange between LLNL and the ENEA was initially confined to the development, application, and evaluation of atmospheric transport and diffusion models. With the emergence of compatible hardware configurations between LLNL and ENEA, exchanges of technology and ideas for improving the development and implementation of systems are beginning to emerge. This report describes cooperative work that has occurred during the past three years, the present state of each system, and recommendations for future exchanges of technology

  18. Emerging technologies in microguidance and control

    Science.gov (United States)

    Weinberg, Marc S.

    1993-01-01

    Employing recent advances in microfabrication, the Charles Stark Draper Laboratory has developed inertial guidance instruments of very small size and low cost. Microfabrication employs the batch processing techniques of solid state electronics, such as photolithography, diffusion, and etching, to carve mechanical parts. Within a few years, microfabricated gyroscopes should perform in the 10 to 100 deg/h range. Microfabricated accelerometers have demonstrated performance in the 50 to 500 microgravity range. These instruments will result in not only the redesign of conventional military products, but also new applications that could not exist without small, inexpensive sensors and computing. Draper's microfabricated accelerometers and gyroscopes will be described and test results summarized. Associated electronics and control issues will also be addressed. Gimballed, vibrating gyroscopes and force rebalance accelerometers constructed from bulk silicon, polysilicon surface-machined tuning fork gyroscopes, and quartz resonant accelerometers and gyroscopes are examined. Draper is pursuing several types of devices for the following reasons: to address wide ranges of performance, to realize construction in a flat pack, and to lessen the risks associated with emerging technologies.

  19. Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for the Pulp and Paper Industry

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Lingbo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); South China Univ. of Technology (SCUT), Guangzhou (China); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-11-01

    The pulp and paper industry ranks fourth in terms of energy consumption among industries worldwide. Globally, the pulp and paper industry accounted for approximately 5 percent of total world industrial final energy consumption in 2007, and contributed 2 percent of direct carbon dioxide (CO2) emissions from industry. Worldwide pulp and paper demand and production are projected to increase significantly by 2050, leading to an increase in this industry’s absolute energy use and greenhouse gas (GHG) emissions. Development of new energy-efficiency and GHG mitigation technologies and their deployment in the market will be crucial for the pulp and paper industry’s mid- and long-term climate change mitigation strategies. This report describes the industry’s processes and compiles available information on the energy savings, environmental and other benefits, costs, commercialization status, and references for 36 emerging technologies to reduce the industry’s energy use and GHG emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. The purpose of this report is to provide engineers, researchers, investors, paper companies, policy makers, and other interested parties with easy access to a well-structured resource of information on these technologies.

  20. Information technology support for emergency management

    International Nuclear Information System (INIS)

    Uuspaeae, P.

    1990-01-01

    Information systems for distributed decision support for emergency management are considered. Specific applications include nuclear power plant emergencies. Emergencies in other industries such as chemical industry may also be considered. Research in the ISEM project is briefly summarized

  1. III-V semiconductor materials and devices

    CERN Document Server

    Malik, R J

    1989-01-01

    The main emphasis of this volume is on III-V semiconductor epitaxial and bulk crystal growth techniques. Chapters are also included on material characterization and ion implantation. In order to put these growth techniques into perspective a thorough review of the physics and technology of III-V devices is presented. This is the first book of its kind to discuss the theory of the various crystal growth techniques in relation to their advantages and limitations for use in III-V semiconductor devices.

  2. A study of advanced training technology: Emerging answers to tough questions

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study reports the result of an extensive nationwide review of military, private sector, and other federal agencies and organizations that are implementing a wide variety of advanced training technologies. This report classifies the general categories of advanced training technologies found and provides an overview of each, including specific types and examples. In addition, the research findings present an organizational model for training development linking overall organizational maturity to readiness to implement specific kinds of advanced training technologies. It also presents proposed methods for selecting media, describes the organizations and the data gathered, and provides a summary of implementation success at each organization. This study is organized as a set of five topics. Each topic raises a number of important questions and provides complete or emerging answers. For organizations who have made advanced training selections, this study is a resource to benchmark their success with other organizations who have made similar selections. For new or developing training organizations, this study will help plan their future technology selections by comparing their level of organizational maturity to the documented experiences of similar organizations.

  3. Physician's emerging roles relating to trends in health information technology.

    Science.gov (United States)

    David Johnson, J

    2014-08-12

    Objective: To determine the new roles that physicians will adopt in the near future to adjust to accelerating trends from managed care to outcome-based practice to health care reform to health information technology to the evolving role of health consumers. Methods: Trends and related developments concerning the changing roles of physicians based on prior literature reviews. Results: Six possible roles, traditional, gatekeeper, coach, navigator, informatician and one voice among many, are discussed in terms of physician's centrality, patient autonomy, decision-making and uncertainty, information seeking, satisfaction and outcomes, particularly those related to compliance. Conclusion: A greater understanding of these emerging roles could lead to more efficacious outcomes in our ever changing, increasingly complex medical system. Patients often have little understanding of emerging trends that lead to the development of specialized roles such as hospitalist and navigators and, relatedly, the evolving roles of physicians.

  4. The potential impact of 3D telepresence technology on task performance in emergency trauma care

    DEFF Research Database (Denmark)

    Söderholm, Hanna M.; Sonnenwald, Diane H.; Cairns, Bruce

    2007-01-01

    a simulated emergency situation 60 paramedics diagnosed and treated a trauma victim while working alone or in collaboration with a physician via 2D video or a 3D proxy. Analysis of paramedics' task performance shows that the fewest harmful procedures occurred in the 3D proxy condition. Paramedics in the 3D...... proxy condition also reported higher levels of self-efficacy. These results indicate 3D telepresence technology has potential to improve paramedics' performance of complex emergency medical tasks and improve emergency trauma health care when designed appropriately....

  5. Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

    Science.gov (United States)

    Parker, Miles; Acland, Andrew; Armstrong, Harry J; Bellingham, Jim R; Bland, Jessica; Bodmer, Helen C; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D; Cope, David; Costanzo, Lucia; Dolan, James A; Doubleday, Robert; Feng, Wai Yi; Godfray, H Charles J; Good, David A; Grant, Jonathan; Green, Nick; Groen, Arnoud J; Guilliams, Tim T; Gupta, Sunjai; Hall, Amanda C; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A; Lueshi, Leila M; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P; Watkinson, Andrew R; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K A; Worts, Kim; Sutherland, William J

    2014-01-01

    Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

  6. Identifying the science and technology dimensions of emerging public policy issues through horizon scanning.

    Directory of Open Access Journals (Sweden)

    Miles Parker

    Full Text Available Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security.

  7. Identifying the Science and Technology Dimensions of Emerging Public Policy Issues through Horizon Scanning

    Science.gov (United States)

    Parker, Miles; Acland, Andrew; Armstrong, Harry J.; Bellingham, Jim R.; Bland, Jessica; Bodmer, Helen C.; Burall, Simon; Castell, Sarah; Chilvers, Jason; Cleevely, David D.; Cope, David; Costanzo, Lucia; Dolan, James A.; Doubleday, Robert; Feng, Wai Yi; Godfray, H. Charles J.; Good, David A.; Grant, Jonathan; Green, Nick; Groen, Arnoud J.; Guilliams, Tim T.; Gupta, Sunjai; Hall, Amanda C.; Heathfield, Adam; Hotopp, Ulrike; Kass, Gary; Leeder, Tim; Lickorish, Fiona A.; Lueshi, Leila M.; Magee, Chris; Mata, Tiago; McBride, Tony; McCarthy, Natasha; Mercer, Alan; Neilson, Ross; Ouchikh, Jackie; Oughton, Edward J.; Oxenham, David; Pallett, Helen; Palmer, James; Patmore, Jeff; Petts, Judith; Pinkerton, Jan; Ploszek, Richard; Pratt, Alan; Rocks, Sophie A.; Stansfield, Neil; Surkovic, Elizabeth; Tyler, Christopher P.; Watkinson, Andrew R.; Wentworth, Jonny; Willis, Rebecca; Wollner, Patrick K. A.; Worts, Kim; Sutherland, William J.

    2014-01-01

    Public policy requires public support, which in turn implies a need to enable the public not just to understand policy but also to be engaged in its development. Where complex science and technology issues are involved in policy making, this takes time, so it is important to identify emerging issues of this type and prepare engagement plans. In our horizon scanning exercise, we used a modified Delphi technique [1]. A wide group of people with interests in the science and policy interface (drawn from policy makers, policy adviser, practitioners, the private sector and academics) elicited a long list of emergent policy issues in which science and technology would feature strongly and which would also necessitate public engagement as policies are developed. This was then refined to a short list of top priorities for policy makers. Thirty issues were identified within broad areas of business and technology; energy and environment; government, politics and education; health, healthcare, population and aging; information, communication, infrastructure and transport; and public safety and national security. PMID:24879444

  8. Workshop 96. Part III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Part III of the proceedings contain 155 contributions in various fields of science and technology including nuclear engineering, environmental science, and biomedical engineering. Out of these, 10 were selected to be inputted in INIS. (P.A.).

  9. Workshop 96. Part III

    International Nuclear Information System (INIS)

    1995-12-01

    Part III of the proceedings contain 155 contributions in various fields of science and technology including nuclear engineering, environmental science, and biomedical engineering. Out of these, 10 were selected to be inputted in INIS. (P.A.)

  10. Development and Evaluation of Senior High School Courses on Emerging Technology: A Case Study of a Course on Virtual Reality

    Science.gov (United States)

    Chen, Chi-Tung

    2012-01-01

    In Taiwan, the National Science Council has implemented the High Scope Program (HSP) since 2006. The purpose of this study was to analyze the development and effectiveness of senior high school HSP courses on emerging technology. This study used a course on virtual reality as an example, to investigate the influence of emerging technology courses…

  11. Convergent Innovation in Emerging Healthcare Technology Ecosystems: Addressing Complexity and Integration

    Directory of Open Access Journals (Sweden)

    Mark A. Phillips

    2017-09-01

    Full Text Available Precision Medicine and Digital Health are emerging areas in healthcare, and they are underpinned by convergent or cross-industry innovation. However, convergence results in greater uncertainty and complexity in terms of technologies, value networks, and organization. There has been limited empirical research on emerging and convergent ecosystems, especially in addressing the issue of integration. This research identifies how organizations innovate in emerging and convergent ecosystems, specifically, how they address the challenge of integration. We base our research on empirical analyses using a series of longitudinal case studies employing a combination of case interviews, field observations, and documents. Our findings identify a need to embrace the complexity by adopting a variety of approaches that balance “credibility-seeking” and “advantage-seeking” behaviours, to navigate, negotiate, and nurture both the innovation and ecosystem, in addition to a combination of “analysis” and “synthesis” actions to manage aspects of integration. We contribute to the convergent innovation agenda and provide practical approaches for innovators in this domain.

  12. 10 CFR 76.91 - Emergency planning.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Emergency planning. 76.91 Section 76.91 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.91 Emergency planning... Emergency Planning and Community Right-to-Know Act of 1986, Title III, Public Law 99-499, or other State or...

  13. 1998 Toxic Chemical Release Inventory Report for the Emergency Planning and Community Right-to-Know Act of 1986, Title III

    International Nuclear Information System (INIS)

    Stockton, Marjorie B.

    1999-01-01

    The Emergency Planning and Community Right-to-Know Act (EPCRA) of 1986 [also known as the Superfund Amendment and Reauthorization Act (SARA), Title III], as modified by Executive Order 12856, requires that all federal facilities evaluate the need to submit an annual Toxic Chemical Release Inventory report as prescribed in Title III, Section 313 of this Act. This annual report is due every July for the preceding calendar year. Owners and operators who manufacture, process, or otherwise use certain toxic chemicals above listed threshold quantities are required to report their toxic chemical releases to all environmental mediums (air, water, soil, etc.). At Los Alamos National Laboratory (LANL), no EPCRA Section 313 chemicals were used in 1998 above the reportable threshold limits of 10,000 lb or 25,000 lb. Therefore LANL was not required to submit any Toxic Chemical Release Inventory reports (Form Rs) for 1998. This document was prepared to provide a detailed description of the evaluation on chemical usage and EPCRA Section 313 threshold determinations for LANL for 1998

  14. Fold-Back: Using Emerging Technologies to Move from Quality Assurance to Quality Enhancement

    Science.gov (United States)

    Leonard, Simon N.; Fitzgerald, Robert N.; Bacon, Matt

    2016-01-01

    Emerging technologies offer an opportunity for the development, at the institutional level, of quality processes with greater capacity to enhance learning in higher education than available through current quality processes. These systems offer the potential to extend use of learning analytics in institutional-level quality processes in addition…

  15. Emerging technologies in point-of-care molecular diagnostics for resource-limited settings.

    Science.gov (United States)

    Peeling, Rosanna W; McNerney, Ruth

    2014-06-01

    Emerging molecular technologies to diagnose infectious diseases at the point at which care is delivered have the potential to save many lives in developing countries where access to laboratories is poor. Molecular tests are needed to improve the specificity of syndromic management, monitor progress towards disease elimination and screen for asymptomatic infections with the goal of interrupting disease transmission and preventing long-term sequelae. In simplifying laboratory-based molecular assays for use at point-of-care, there are inevitable compromises between cost, ease of use and test performance. Despite significant technological advances, many challenges remain for the development of molecular diagnostics for resource-limited settings. There needs to be more advocacy for these technologies to be applied to infectious diseases, increased efforts to lower the barriers to market entry through streamlined and harmonized regulatory approaches, faster policy development for adoption of new technologies and novel financing mechanisms to enable countries to scale up implementation.

  16. Digital innovations and emerging technologies for enhanced recovery programmes

    DEFF Research Database (Denmark)

    Michard, F; Gan, T J; Kehlet, H

    2017-01-01

    Enhanced recovery programmes (ERPs) are increasingly used to improve post-surgical recovery. However, compliance to various components of ERPs-a key determinant of success-remains sub-optimal. Emerging technologies have the potential to help patients and caregivers to improve compliance with ERPs...... of the above-mentioned ERP elements is omitted during the surgical journey.By optimizing compliance to the multiple components of ERPs, digital innovations, non-invasive techniques and wearable sensors have the potential to magnify the clinical and economic benefits of ERPs. Among the growing number...... of technical innovations, studies are needed to clarify which tools and solutions have real clinical value and are cost-effective....

  17. Water assessment for the Lower Colorado River region-emerging energy technology development

    Science.gov (United States)

    1981-08-01

    Water supply availability for two hypothetical levels of emerging energy technology development are assessed. The water and related land resources implications of such hypothetical developments are evaluated. Water requirement, the effects on water quality, costs of water supplies, costs of disposal of wastewaters, and the environmental, economic and social impacts are determined, providing information for the development of non-nuclear energy research.

  18. Challenges to effective crisis management: using information and communication technologies to coordinate emergency medical services and emergency department teams.

    Science.gov (United States)

    Reddy, Madhu C; Paul, Sharoda A; Abraham, Joanna; McNeese, Michael; DeFlitch, Christopher; Yen, John

    2009-04-01

    The purpose of this study is to identify the major challenges to coordination between emergency department (ED) teams and emergency medical services (EMS) teams. We conducted a series of focus groups involving both ED and EMS team members using a crisis scenario as the basis of the focus group discussion. We also collected organizational workflow data. We identified three major challenges to coordination between ED and EMS teams including ineffectiveness of current information and communication technologies, lack of common ground, and breakdowns in information flow. The three challenges highlight the importance of designing systems from socio-technical perspective. In particular, these inter-team coordination systems must support socio-technical issues such as awareness, context, and workflow between the two teams.

  19. Exploring technology diffusion in emerging markets – the role of public policy for wind energy

    International Nuclear Information System (INIS)

    Friebe, Christian A.; Flotow, Paschen von; Täube, Florian A.

    2014-01-01

    This study challenges the implicit assumption of homogeneity in national institutional contexts made in past studies of (renewable) energy policy. We propose that institutional differences matter by focusing on several technology-specific and generic policy factors that can foster technology diffusion through private sector activity. More specifically, we explore perceptions of early adopters in emerging economy contexts using wind park project developers as an example. By applying a parsimonious method for our questionnaire as well as qualitative data we make several contributions: Methodologically, we introduce Maximum Difference Scaling to the energy policy domain. Empirically, we identify several public influences on private investment, and assess their relative importance. This leads to new insights challenging findings from industrialized economies; we identified additional institutional barriers to diffusion, hence, the requirement of a combination of technology-specific and generic policy measures. - Highlights: • Explorative qualitative and quantitative study of project developers in emerging markets. • Identifies influencing factors for technology diffusion regarding wind farms. • Predictable public authorities and well-implemented public processes attract intern. project developers. • Feed-in-Tariffs and grid access guarantees are particularly appealing

  20. Risk-based systems analysis for emerging technologies: Applications of a technology risk assessment model to public decision making

    International Nuclear Information System (INIS)

    Quadrel, M.J.; Fowler, K.M.; Cameron, R.; Treat, R.J.; McCormack, W.D.; Cruse, J.

    1995-01-01

    The risk-based systems analysis model was designed to establish funding priorities among competing technologies for tank waste remediation. The model addresses a gap in the Department of Energy's (DOE's) ''toolkit'' for establishing funding priorities among emerging technologies by providing disciplined risk and cost assessments of candidate technologies within the context of a complete remediation system. The model is comprised of a risk and cost assessment and a decision interface. The former assesses the potential reductions in risk and cost offered by new technology relative to the baseline risk and cost of an entire system. The latter places this critical information in context of other values articulated by decision makers and stakeholders in the DOE system. The risk assessment portion of the model is demonstrated for two candidate technologies for tank waste retrieval (arm-based mechanical retrieval -- the ''long reach arm'') and subsurface barriers (close-coupled chemical barriers). Relative changes from the base case in cost and risk are presented for these two technologies to illustrate how the model works. The model and associated software build on previous work performed for DOE's Office of Technology Development and the former Underground Storage Tank Integrated Demonstration, and complement a decision making tool presented at Waste Management 1994 for integrating technical judgements and non-technical (stakeholder) values when making technology funding decisions

  1. Fluorescence-guided surgery and intervention - An AAPM emerging technology blue paper.

    Science.gov (United States)

    Pogue, Brian W; Zhu, Timothy C; Ntziachristos, Vasilis; Paulsen, Keith D; Wilson, Brian C; Pfefer, Joshua; Nordstrom, Robert J; Litorja, Maritoni; Wabnitz, Heidrun; Chen, Yu; Gioux, Sylvain; Tromberg, Bruce J; Yodh, Arjun G

    2018-04-10

    Fluorescence-guided surgery (FGS) and other interventions are rapidly evolving as a class of technologically driven interventional approaches in which many surgical specialties visualize fluorescent molecular tracers or biomarkers through associated cameras or oculars to guide clinical decisions on pathological lesion detection and excision/ablation. The technology has been commercialized for some specific applications, but also presents technical challenges unique to optical imaging that could confound the utility of some interventional procedures where real-time decisions must be made. Accordingly, the AAPM has initiated the publication of this Blue Paper of The Emerging Technology Working Group (TETAWG) and the creation of a Task Group from the Therapy Physics Committee within the Treatment Delivery Subcommittee. In describing the relevant issues, this document outlines the key parameters, stakeholders, impacts, and outcomes of clinical FGS technology and its applications. The presentation is not intended to be conclusive, but rather to inform the field of medical physics and stimulate the discussions needed in the field with respect to a seemingly low-risk imaging technology that has high potential for significant therapeutic impact. This AAPM Task Group is working toward consensus around guidelines and standards for advancing the field safely and effectively. © 2018 American Association of Physicists in Medicine.

  2. Development of Cryogenic Engine for GSLV MkIII: Technological Challenges

    Science.gov (United States)

    Praveen, RS; Jayan, N.; Bijukumar, KS; Jayaprakash, J.; Narayanan, V.; Ayyappan, G.

    2017-02-01

    Cryogenic engine capable of delivering 200 kN thrust is being developed for the first time in the country by ISRO for powering the upper stage of GSLV Mk-III, the next generation launch vehicle of ISRO capable of launching four tonne class satellites to Geo-synchronous Transfer Orbit(GTO). Development of this engine started a decade ago when various sub-systems development and testing were taken up. Starting with injector element development, the design, realization and testing of the major sub-systems viz the gas generator, turbopumps, start-up system and thrust chamber have been successfully done in a phased manner before conducting a series of developmental tests in the integrated engine mode. Apart from the major sub-systems, many critical components like the igniter, control components etc were independently developed and qualified. During the development program many challenges were faced in almost all areas of propulsion engineering. Systems engineering of the engine was another key challenge in the realization. This paper gives an outlook on various technological challenges faced in the key areas related to the engine development, insight to the solutions and measures taken to overcome the challenges.

  3. Visioning future emergency healthcare collaboration

    DEFF Research Database (Denmark)

    Söderholm, Hanna M.; Sonnenwald, Diane H.

    2010-01-01

    physicians, nurses, administrators, and information technology (IT) professionals working at large and small medical centers, and asked them to share their perspectives regarding 3DMC's potential benefits and disadvantages in emergency healthcare and its compatibility and/or lack thereof......New video technologies are emerging to facilitate collaboration in emergency healthcare. One such technology is 3D telepresence technology for medical consultation (3DMC) that may provide richer visual information to support collaboration between medical professionals to, ideally, enhance patient......, and resources. Both common and unique perceptions regarding 3DMC emerged,illustrating the need for 3DMC, and other collaboration technologies,to support interwoven situational awareness across different technological frames....

  4. Application of Emerging Pharmaceutical Technologies for Therapeutic Challenges of Space Exploration Missions

    Science.gov (United States)

    Putcha, Lakshmi

    2011-01-01

    An important requirement of therapeutics for extended duration exploration missions beyond low Earth orbit will be the development of pharmaceutical technologies suitable for sustained and preventive health care in remote and adverse environmental conditions. Availability of sustained, stable and targeted delivery pharmaceuticals for preventive health of major organ systems including gastrointestinal, hepato-renal, musculo-skeletal and immune function are essential to offset adverse effects of space environment beyond low Earth orbit. Specifically, medical needs may include multi-drug combinations for hormone replacement, radiation protection, immune enhancement and organ function restoration. Additionally, extended stability of pharmaceuticals dispensed in space must be also considered in future drug development. Emerging technologies that can deliver stable and multi-therapy pharmaceutical preparations and delivery systems include nanotechnology based drug delivery platforms, targeted-delivery systems in non-oral and non-parenteral formulation matrices. Synthetic nanomaterials designed with molecular precision offer defined structures, electronics, and chemistries to be efficient drug carriers with clear advantages over conventional materials of drug delivery matricies. Nano-carrier materials like the bottle brush polymers may be suitable for systemic delivery of drug cocktails while Superparamagnetic Iron Oxide Nanoparticles or (SPIONS) have great potential to serve as carriers for targeted drug delivery to a specific site. These and other emerging concepts of drug delivery and extended shelf-life technologies will be reviewed in light of their application to address health-care challenges of exploration missions. Innovations in alternate treatments for sustained immune enhancement and infection control will be also discussed.

  5. THz spectroscopy: An emerging technology for pharmaceutical development and pharmaceutical Process Analytical Technology (PAT) applications

    Science.gov (United States)

    Wu, Huiquan; Khan, Mansoor

    2012-08-01

    As an emerging technology, THz spectroscopy has gained increasing attention in the pharmaceutical area during the last decade. This attention is due to the fact that (1) it provides a promising alternative approach for in-depth understanding of both intermolecular interaction among pharmaceutical molecules and pharmaceutical product quality attributes; (2) it provides a promising alternative approach for enhanced process understanding of certain pharmaceutical manufacturing processes; and (3) the FDA pharmaceutical quality initiatives, most noticeably, the Process Analytical Technology (PAT) initiative. In this work, the current status and progress made so far on using THz spectroscopy for pharmaceutical development and pharmaceutical PAT applications are reviewed. In the spirit of demonstrating the utility of first principles modeling approach for addressing model validation challenge and reducing unnecessary model validation "burden" for facilitating THz pharmaceutical PAT applications, two scientific case studies based on published THz spectroscopy measurement results are created and discussed. Furthermore, other technical challenges and opportunities associated with adapting THz spectroscopy as a pharmaceutical PAT tool are highlighted.

  6. Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhao, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-24

    Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

  7. Impact of the Emerging Technologies of Distance Learning and Simulations on the Army National Guard

    National Research Council Canada - National Science Library

    O'Neill, Edward

    1998-01-01

    The effective and efficient use of the emerging technologies of distance learning and simulations presents and opportunity for the Army National Guard to prepare for training and operations in the 21st century...

  8. Explicit and implicit attitude toward an emerging food technology: The case of cultured meat

    NARCIS (Netherlands)

    Bekker, G.A.; Fischer, A.R.; Tobi, H.; Trijp, H.C.M. van

    2017-01-01

    Cultured meat is an unfamiliar emerging food technology that could provide a near endless supply of high quality protein with a relatively small ecological footprint. To understand consumer acceptance of cultured meat, this study investigated the influence of information provision on the explicit

  9. Implementing a national early awareness and alert system for new and emerging health technologies in Italy: the COTE Project.

    Science.gov (United States)

    Migliore, Antonio; Perrini, Maria Rosaria; Jefferson, Tom; Cerbo, Marina

    2012-07-01

    The aim of this study was to establish a national Early Awareness and Alert (EAA) system for the identification and assessment of new and emerging health technologies in Italy. In 2008, Agenas, a public body supporting Regions and the Ministry of Health (MoH) in health services research, started a project named COTE (Observatory of New and Emerging Health Technologies) with the ultimate aim of implementing a national EAA system. The COTE project involved all stakeholders (MoH, Regions, Industry, Universities, technical government bodies, and Scientific Societies), in defining the key characteristics and methods of the EAA system. Agreement with stakeholders was reached using three separate workshops. During the workshops, participants shared and agreed methods for identification of new and emerging health technologies, prioritization, and assessment. The structure of the Horizon Scanning (HS) reports was discussed and defined. The main channels for dissemination of outputs were identified as the EuroScan database, and the stakeholders' Web portals. During the final workshop, Agenas presented the first three HS reports produced at national level and proposed the establishment of a permanent national EAA system. The COTE Project created the basis for a permanent national EAA system in Italy. An infrastructure to enable the stakeholders network to grow was created, methods to submit new and emerging health technologies for possible evaluation were established, methods for assessment of the technologies selected were defined, and the stakeholders involvement was delineated (in the identification, assessment, and dissemination stages).

  10. Simultaneous removal of Ni(II), As(III), and Sb(III) from spiked mine effluent with metakaolin and blast-furnace-slag geopolymers.

    Science.gov (United States)

    Luukkonen, Tero; Runtti, Hanna; Niskanen, Mikko; Tolonen, Emma-Tuulia; Sarkkinen, Minna; Kemppainen, Kimmo; Rämö, Jaakko; Lassi, Ulla

    2016-01-15

    The mining industry is a major contributor of various toxic metals and metalloids to the aquatic environment. Efficient and economical water treatment methods are therefore of paramount importance. The application of natural or low-cost sorbents has attracted a great deal of interest due to the simplicity of its process and its potential effectiveness. Geopolymers represent an emerging group of sorbents. In this study, blast-furnace-slag and metakaolin geopolymers and their raw materials were tested for simultaneous removal of Ni(II), As(III) and Sb(III) from spiked mine effluent. Blast-furnace-slag geopolymer proved to be the most efficient of the studied materials: the experimental maximum sorption capacities for Ni, As and, Sb were 3.74 mg/g, 0.52 mg/g, and 0.34 mg/g, respectively. Although the capacities were relatively low due to the difficult water matrix, 90-100% removal of Ni, As, and Sb was achieved when the dose of sorbent was increased appropriately. Removal kinetics fitted well with the pseudo-second-order model. Our results indicate that geopolymer technology could offer a simple and effective way to turn blast-furnace slag to an effective sorbent with a specific utilization prospect in the mining industry. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Emerging technologies to create inducible and genetically defined porcine cancer models

    Directory of Open Access Journals (Sweden)

    Lawrence B Schook

    2016-02-01

    Full Text Available There is an emerging need for new animal models that address unmet translational cancer research requirements. Transgenic porcine models provide an exceptional opportunity due to their genetic, anatomic and physiological similarities with humans. Due to recent advances in the sequencing of domestic animal genomes and the development of new organism cloning technologies, it is now very feasible to utilize pigs as a malleable species, with similar anatomic and physiological features with humans, in which to develop cancer models. In this review, we discuss genetic modification technologies successfully used to produce porcine biomedical models, in particular the Cre-loxP System as well as major advances and perspectives the CRISPR/Cas9 System. Recent advancements in porcine tumor modeling and genome editing will bring porcine models to the forefront of translational cancer research.

  12. Emerging Technologies to Create Inducible and Genetically Defined Porcine Cancer Models.

    Science.gov (United States)

    Schook, Lawrence B; Rund, Laurie; Begnini, Karine R; Remião, Mariana H; Seixas, Fabiana K; Collares, Tiago

    2016-01-01

    There is an emerging need for new animal models that address unmet translational cancer research requirements. Transgenic porcine models provide an exceptional opportunity due to their genetic, anatomic, and physiological similarities with humans. Due to recent advances in the sequencing of domestic animal genomes and the development of new organism cloning technologies, it is now very feasible to utilize pigs as a malleable species, with similar anatomic and physiological features with humans, in which to develop cancer models. In this review, we discuss genetic modification technologies successfully used to produce porcine biomedical models, in particular the Cre-loxP System as well as major advances and perspectives the CRISPR/Cas9 System. Recent advancements in porcine tumor modeling and genome editing will bring porcine models to the forefront of translational cancer research.

  13. Challenge of emerging technologies: balancing the needs of law enforcement against the duty to protect individual rights

    Science.gov (United States)

    Lingerfelt, James A.

    1997-01-01

    This paper discusses three emerging technologies which will revolutionize the business operations of law enforcement: databases and search engines; biometric identification systems; and electronic surveillance and tracking devices. Unfortunately, these technologies may also lead to a serious ethical conflict for law enforcement. The tools will make it easier than ever to accomplish the core business of policing: crime prevention; investigation; and intelligence gathering. The same tools, used improperly, will also lead to routine intrusions on personal privacy. These technologies have been and are being developed for the private sector, the military and the intelligence community. The vendors are now aggressively marketing them to law enforcement and criminal justice agencies. The law enforcement community has embraced the technology, but without considering the long term impact. In the past, the police have abused wiretaps and other early surveillance technology. As a result, a sinister perception about police surveillance practices persists and a cumbersome bureaucracy has been imposed to control their use. Developing and establishing policies governing the use of emerging technologies can prevent these mistakes from being repeated. This paper recommends that criminal justice practitioners begin a discussion now, in advance of these technologies becoming commercially available, with a view to defining clear guidelines for their proper use.

  14. Bosniak category III cysts are more likely to be malignant than we expected in the era of multidetector computed tomography technology

    Directory of Open Access Journals (Sweden)

    Pal Bata

    2014-01-01

    Full Text Available Background: Complex indeterminate Bosniak category III renal cystic masses are traditionally considered to be malignant in 50%. Our aim was to retrospectively evaluate the attenuation characteristics in multiphase computed tomography (CT and to determinate the incidence of malignancy based on histological findings on all Bosniak category III renal cystic masses investigated in our department between April 3, 2007 and November 21, 2013. Materials and Methods: Quadriphasic multidetector CT images of nineteen patients (mean age: 56.5 ± 16.5 years with radiologically detected Bosniak category III lesions were reviewed retrospectively. All lesions were surgically removed, and the incidence of malignancy, based on pathological results was determined. Results: Calcification was present in four lesions (21%. The mean largest diameter was 48.7 ± 28.8 mm. All lesions were multilobulated and septated. Of the 19 removed lesions, 16 (84% were malignant, and 3 (16% were benign (one inflammatory cyst including a nephrolith, one cystic nephroma and one atypical angiomyolipoma. CT and histological findings of 19 Bosniak III cysts were correlated. Conclusion: Our study demonstrated much higher prevalence of malignancy (84% in radiologically detected Bosniak category III cysts than it has been described before. It may due to the era of modern multidetector CT technology and multiphase protocol.

  15. Airborne radioactive emission control technology. Volume III

    International Nuclear Information System (INIS)

    Skoski, L.; Berlin, R.; Corby, D.; Clancy, J.; Hoopes, G.

    1980-03-01

    This report reviews the current and future control technology for airborne emissions from a wide variety of industries/facilities, including uranium mining and milling, other nuclear fuel cycle facilities, other NRC-licensed and DOE facilities, fossil fuel facilities, selected metal and non-metal extraction industries, and others. Where specific radioactivity control technology is lacking, a description of any existing control technology is given. Future control technology is assessed in terms of improvements to equipment performance and process alterations. A catalogue of investigated research on advanced control technologies is presented

  16. Scenarios to explore the futures of the emerging technology of organic and large area electronics

    NARCIS (Netherlands)

    Parandian, Alireza; Rip, Arie

    2013-01-01

    Emerging technologies pose challenges for futures research because of their uncertainties combined with promises. Actors are anticipating and acting strategically. Sociotechnical scenarios building on endogenous futures support and enlighten actors. Such scenarios contribute to “strategic

  17. Evaluating oversight systems for emerging technologies: a case study of genetically engineered organisms.

    Science.gov (United States)

    Kuzma, Jennifer; Najmaie, Pouya; Larson, Joel

    2009-01-01

    The U.S. oversight system for genetically engineered organisms (GEOs) was evaluated to develop hypotheses and derive lessons for oversight of other emerging technologies, such as nanotechnology. Evaluation was based upon quantitative expert elicitation, semi-standardized interviews, and historical literature analysis. Through an interdisciplinary policy analysis approach, blending legal, ethical, risk analysis, and policy sciences viewpoints, criteria were used to identify strengths and weaknesses of GEOs oversight and explore correlations among its attributes and outcomes. From the three sources of data, hypotheses and broader conclusions for oversight were developed. Our analysis suggests several lessons for oversight of emerging technologies: the importance of reducing complexity and uncertainty in oversight for minimizing financial burdens on small product developers; consolidating multi-agency jurisdictions to avoid gaps and redundancies in safety reviews; consumer benefits for advancing acceptance of GEO products; rigorous and independent pre- and post-market assessment for environmental safety; early public input and transparency for ensuring public confidence; and the positive role of public input in system development, informed consent, capacity, compliance, incentives, and data requirements and stringency in promoting health and environmental safety outcomes, as well as the equitable distribution of health impacts. Our integrated approach is instructive for more comprehensive analyses of oversight systems, developing hypotheses for how features of oversight systems affect outcomes, and formulating policy options for oversight of future technological products, especially nanotechnology products.

  18. Land Transport Emergency Response Technology Report

    International Nuclear Information System (INIS)

    DOTSON, LORI J.; PIERCE, JIM D.

    2003-01-01

    Sandia National Laboratories was tasked by the Japan Nuclear Cycle Development Institute (JNC) to provide assistance in developing an emergency response plan for radioactive material transportation activities. Those tasks included compiling radioactive materials (RAM) transportation accident data FR-om the open literature and databases, investigating emergency response plans for radioactive materials transport in the United States, and developing specific recommendations for the JNC' nuclear material transport emergency response plan, based on information gathered during the first two tasks. These recommendations include developing a RAM database, a public transparency Internet website, an emergency response inFR-astructure designed specifically for transportation needs, and a clear set of directives to provide authority in the case of transportation accidents or incidents involving RAM

  19. The effects of Basel III liquidity regulations on banks’ profitability

    Directory of Open Access Journals (Sweden)

    Tafirei Mashamba

    2018-05-01

    Full Text Available The new Basel III Liquidity Coverage Ratio standard which encourages banks to maintain a diversified pool of high-quality liquid assets against their short-term expected net cash outflows although it appears to be noble from a theoretic perspective it may weigh down banks’ performance because liquid assets earn low returns. It is against this background that this study sought to evaluate the impact of the new Basel III liquidity regulations on the profitability of banks in emerging market economies. A sample of 40 banks operating in 11 emerging markets over the period 2011 to 2016 was used in the study. For estimation, system Generalized Method of Moments (GMM estimator was employed. Surprisingly, empirical results demonstrated that regulatory pressure stemming from Liquidity Coverage Ratio requirement increased instead of diminishing the profitability of banks in emerging markets. The plausible explanation given for this evidence was that banks in emerging markets managed their liquidity in a manner that is consistent with Liquidity Coverage Ratio rule hence the regulation had no detrimental effects on banks in emerging economies.

  20. Convergence of emerging science and technology trends for defense, security, and human performance

    International Nuclear Information System (INIS)

    Vaseashta, Ashok

    2010-01-01

    Full text: Recent technological innovations have changed the landscape of traditional scientific research. Advances in the nano- and bio-sciences, and materials and information processing are driving innovations at a phenomenal rate, resulting in greater interest yet uncertainty in the chemical-biological threat environment, research and development and other fields of policy, and overall preparedness. Conversely, the synergy arising from the convergence of nanotechnology, biotechnology, information processing and cognitive sciences (NBIC) offers great potential for transformational, revolutionary opportunities with many technological applications. Employing a new initiative termed 'Technology Foresight, Assessment, and Road-Mapping' (Tech-FARM TM ) - a multi dimensional futures-oriented approach for identification and management of emerging and/or disruptive science and technology. In literature similar initiative termed as GRAIN and BANG appear with similarity to NBIC - however Tech-FARM is comprehensive and an exhaustive method. Trans-disciplinary principles underlying NBIC convergence facilitates the development of visions and projections of future possible scientific and technological advances, environments, and productive collaborations for integrated, novel and/or unconventional solutions for 21 st century chem. -bio defense challenges. Incorporation of cognitive sciences refers to human performance enhancement in battlefield theatre. The dynamic relationship between contextual influence (socio-economical factors) and technological development is of critical consideration for S and T futures analyses. The Tech-FARM approach comprises three over-lapping practices of futures studies, including: foresight, the identification of future S and T development and their interaction with society and environment with the purpose of guiding actions to produce a more favorable future; assessment, which is concerned with the unintended, indirect, and delayed impacts of

  1. A multi-level model of emerging technology: An empirical study of the evolution of biotechnology from 1976 to 2003

    Science.gov (United States)

    van Witteloostuijn, Arjen

    2018-01-01

    In this paper, we develop an ecological, multi-level model that can be used to study the evolution of emerging technology. More specifically, by defining technology as a system composed of a set of interacting components, we can build upon the argument of multi-level density dependence from organizational ecology to develop a distribution-independent model of technological evolution. This allows us to distinguish between different stages of component development, which provides more insight into the emergence of stable component configurations, or dominant designs. We validate our hypotheses in the biotechnology industry by using patent data from the USPTO from 1976 to 2003. PMID:29795575

  2. An analysis of the impact of emerging technology on organisations’ internal controls

    OpenAIRE

    2013-01-01

    M.Comm. (Computer Auditing) This study presents an evaluation of emerging information communication technology (ICT) solutions to the security internal control systems in South African organisations. Information systems have enabled companies to communicate more efficiently, gain competitive advantage and get a larger market share. These information systems therefore need to be protected securely as they are the vehicles and containers for critical information assets in decision-making pro...

  3. Emerging sensor and I and C technologies for nuclear power plants

    International Nuclear Information System (INIS)

    Korsah, K.; Wood, R. T.; Freer, E.; Antonescu, C.

    2006-01-01

    This paper presents the findings from a survey of emerging technologies in the field of instrumentation and controls (I and C). The survey findings give an overview of the state-of-the-art in selected technology focus areas for industrial, research, or scientific applications that are relevant to nuclear power plant I and C systems, and discuss potential regulatory impact for safety-related applications. Four technology focus areas are selected for review: Sensors and Measurement Systems; Radiation Hardness of Microprocessors and other Integrated Circuits; Diagnostics and Prognostics Systems; and High-Integrity Software. It is concluded that, while there have been considerable advances in digital I and C hardware, advances in software engineering have not kept pace with hardware. The authors anticipate advances in hardware (e.g., more accurate sensors, sophisticated on-line diagnostics, advances in rad-hard electronics) to influence some regulatory revisions (e.g., surveillance requirements, margins, calibration intervals). However, the state-of-the-art in software engineering has not advanced enough to warrant significant changes in the current position in software review requirements. (authors)

  4. DND/CAF energy horizons from historical data to the potential exploitation of emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Labbe, P., E-mail: Paul.Labbe@drdc-rddc.gc.ca [Defence Research and Development Canada (DRDC), Ottawa, ON (Canada)

    2015-07-01

    This paper reviews the energy portfolio of Department of National Defence (DND) and of the Canadian Armed Forces (CAF) from different perspectives based on recent data analyses of the energy used over several years. Then it shows a projection of the potential impacts on current and future DND/CAF capabilities of selected emerging technologies (nuclear and non-nuclear). When possible, it estimates the potential life-cycle cost savings from the hypothetical adoption of such technologies that minimize operational cost and waste management burden. (author)

  5. DND/CAF energy horizons from historical data to the potential exploitation of emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Labbe, P. [Defence Research and Development Canada (DRDC), Ottawa, Ontario (Canada)

    2016-03-15

    This paper reviews the energy portfolio of Department of National Defence (DND) and of the Canadian Armed Forces (CAF) from different perspectives based on recent data analyses of the energy used over several years. Then it shows a projection of the potential impacts on current and future DND/CAF capabilities of selected emerging technologies (nuclear and non-nuclear). When possible, it estimates the potential life-cycle cost savings from the hypothetical adoption of such technologies that minimize operational cost and waste management burden. (author)

  6. Emerging Technologies Integrating Technology into Study Abroad

    Science.gov (United States)

    Godwin-Jones, Robert

    2016-01-01

    "Ready access to travel and to technology-enhanced social networking (e.g., Facebook or Skype) has changed the nature of study abroad to the point where today's experiences are fundamentally different from those of earlier eras" (Kinginger, 2013a, p. 345). In addition to more travel options and greater technology availability, study…

  7. Is co-invention expediting technological catch up? A study of collaboration between emerging country firms

    OpenAIRE

    Giuliani, Elisa; Martinelli, Arianna; Rabellotti, Roberta

    2015-01-01

    Firms from emerging countries such as Brazil, India, and China (BIC) are going global, and Europe is attracting around one-third of their direct outward investments. Growing internationalization constitutes an opportunity for technological catch up. In this paper we analyze BIC firms' cross-border inventions with European Union (EU-27) actors, during the period 1990-2012. Our results suggest that cross-border inventions represent an opportunity for BIC firms to accumulate technological capabi...

  8. Position-controlled epitaxial III-V nanowires on silicon

    NARCIS (Netherlands)

    Roest, A.L.; Verheijen, M.A.; Wunnicke, O.; Serafin, S.N.; Wondergem, H.J.; Bakkers, E.P.A.M.

    2006-01-01

    We show the epitaxial integration of III-V semiconductor nanowires with silicon technology. The wires are grown by the VLS mechanism with laser ablation as well as metal-organic vapour phase epitaxy. The hetero-epitaxial growth of the III-V nanowires on silicon was confirmed with x-ray diffraction

  9. Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, A; Singh, M P; Singh, V K

    1982-05-01

    The nitrato-complexes, (Y(PyBzH)/sub 2/(NO/sub 3/)/sub 2/)NO/sub 3/.H/sub 2/O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole) are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm/sup -1/cm/sup 2/mol/sup -1/) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the positive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C/sub 2/v) and uncoordinated (D/sub 3/h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms.

  10. Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

    International Nuclear Information System (INIS)

    Mishra, A.; Singh, M.P.; Singh, V.K.

    1982-01-01

    The nitrato-complexes, [Y(PyBzH) 2 (NO 3 ) 2 ]NO 3 .H 2 O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole] are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm -1 cm 2 mol -1 ) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the terpositive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C 2 v) and uncoordinated (D 3 h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms. (author)

  11. The Changing Nature of Law’s Natural Person: The Impact of Emerging Technologies on the Legal Concept of the Person

    NARCIS (Netherlands)

    van Beers, B.C.

    This article discusses the legal concept of the person against the background of technological developments. Emerging technologies are offering radical ways to transform the biological and physical aspects of life. Several legal scholars claim that the technological artificialization of human life

  12. Firebird-III program description

    International Nuclear Information System (INIS)

    Lin, M.R.; Prawirosochardjo, S.; Rennick, D.F.; Wessman, E.; Blain, R.J.D.; Wilson, J.M.

    1979-09-01

    The FIREBIRD-III digital computer program is a general network code developed primarily for predicting the thermalhydraulic behaviour of CANDU power reactors during a postulated loss-of-coolant accident and the subsequent emergency coolant injection. Because of its flexibility, the code can also be used to solve a large variety of general two-phase flow problems. This report describes the thermalhydraulic models and the computation methods used in the program

  13. From basic concepts to emerging technologies in regional anesthesia.

    Science.gov (United States)

    Dillane, Derek; Tsui, Ban C H

    2010-10-01

    The present article details how our understanding of the basic concepts of regional anesthesia has recently evolved. We will appraise current technological advances and question the commensurate nature of the relationship between tradition and innovation. Ultrasound localization has enhanced our understanding of the needle-nerve relationship. Intraneural injection of local anesthetic may occur with greater frequency than previously thought without inevitably leading to neurological complications. The ratio of neural to non-neural tissue varies both between and within nerves and may be an important determinant of neural injury. Ultrasonographic evidence of intraneural injection is subject to observer expertise and the resolution of the ultrasound image. Current ultrasound resolution capability does not reliably permit differentiation between intrafascicular and extrafascicular drug injection. Perineural electrical impedance may be a determinant of current threshold and conceivably distinguish between intraneural and extraneural tissue. Technology that enhances the sonographic image of both procedure needle and target nerve is the focus of current endeavors in ultrasound innovation.There is inconclusive evidence that the use of ultrasound technology has reduced the incidence of local anesthetic toxicity. Lipid emulsion therapy is now an accepted treatment for systemic local anesthetic toxicity. There are new reports on the development of an ultra long-acting local anesthetic agent that would permit lower doses and superannuate catheter-based continuous regional anesthesia techniques. Over the past decade, our understanding of the fundamental concepts of regional anesthesia continues to be challenged by emerging experimental and clinical evidence.

  14. Simulated Target Preparation and Separation of Cd (II) - In (III) Matrices Using 8-Hydroxyquinoline Reagent for Producing Indium - III Radioisotope

    International Nuclear Information System (INIS)

    Sunarhadijoso Soenarjo; Swasono R Tamat; Lukiyawati; Lintang Maharani

    2002-01-01

    The potency of production and application of 111 In in Indonesia is not supported yet by capability in required processing technology. The presented paper is a preliminary study on processing technology of 111 In production from 112 Cd target covering simulated target preparation and separation of Cd(II)-In(III) matrices. The target preparation was performed by means of electroplating of CdSO 4 solution prepared from reaction of CdO and sulphuric acid. The separation of Cd(II)-In(III) matrices was proceeded by means of solvent extraction in the presence of 8-hydroxyquinoline as In(III)-complexing agent. The Cd-electroplating deposit was satisfactorily found by using 40-60 mA currents with an electroplating time of 5-7 hours. Simulated matrix solution containing mixture of Cd(II) and In(III) was extracted into chloroform with the presence of 8-hydroxyquinoline. The chloroform phase being assumed to contain In(III)-8-hydroxyquinoline complex was then re-extracted with 1 M HCl or saline solution. Each extraction fraction was spectrophotometrically identified in the region of 200-400 nm. From the resulting absorption spectra, it can be shown that the In(III) species is selectively separated from the Cd(II)-matrix. The use of saline in the re-extraction process is better then 1 M HCl solution due to solubility of 8-hydroxyquinoline in HCl. (author)

  15. Emerging landscape of accelerator science and technology

    International Nuclear Information System (INIS)

    Chattopadhyay, Swapan

    2011-01-01

    John Cockcroft's splitting of the atom and Ernest Lawrence's invention of the cyclotron in the first half of the twentieth century ushered in the grand era of ever higher energy particle accelerators to probe deeper into matter. It also forged a link, bonding scientific discovery with technological innovation that continues today in the twenty first century. In the second half of the twentieth century, we witnessed the emergence of the photon and neutron sciences driven by accelerators built-by-design producing tailored and ultra-bright pulses of bright photons and neutrons to probe structure and function of matter from aggregate to individual molecular and atomic scales in unexplored territories in material and life sciences. As we enter the twenty first century, the race for ever higher energies, brightness and luminosity to probe atto-metric and atto-second domains of the ultra-small structures and ultra-fast processes continues. We give a glimpse of the recent developments and innovations in the conception, production and control of charged particle beams in the service of scientific society. (author)

  16. The influence of perceived uncertainty on entrepreneurial action in emerging renewable energy technology; biomass gasification projects in the Netherlands

    International Nuclear Information System (INIS)

    Meijer, Ineke S.M.; Hekkert, Marko P.; Koppenjan, Joop F.M.

    2007-01-01

    Emerging renewable energy technologies cannot break through without the involvement of entrepreneurs who dare to take action amidst uncertainty. The uncertainties that the entrepreneurs involved perceive will greatly affect their innovation decisions and can prevent them from engaging in innovation projects aimed at developing and implementing emerging renewable energy technologies. This article analyzes how perceived uncertainties and motivation influence an entrepreneur's decision to act, using empirical data on biomass gasification projects in the Netherlands. Our empirical results show that technological, political and resource uncertainty are the most dominant sources of perceived uncertainty influencing entrepreneurial decision-making. By performing a dynamic analysis, we furthermore demonstrate that perceived uncertainties and motivation are not stable, but evolve over time. We identify critical factors in the project's internal and external environment which influence these changes in perceived uncertainties and motivation, and describe how various interactions between the different variables in the conceptual model (internal and external factors, perceived uncertainty, motivation and previous actions of the entrepreneurs) positively or negatively influence the decision of entrepreneurs to continue entrepreneurial action. We discuss how policymakers can use these insights for stimulating the development and diffusion of emerging renewable energy technologies

  17. Emerging Technologies Acceptance in Online Tutorials: Tutors' and Students' Behavior Intentions in Higher Education

    Science.gov (United States)

    Susilo, Adhi

    2014-01-01

    Tutors' and students' intentions to use emerging technologies (ETs) in e-learning systems in higher education institutions are a central concern of researchers, academicians, and practitioners. However, tutors' and students' intentions to use ETs in e-learning systems in distance learning are relatively low. The goal of the study, developed in…

  18. Accelerated Internationalization in Emerging Markets: Empirical Evidence from Brazilian Technology-Based Firms

    Directory of Open Access Journals (Sweden)

    Fernanda Ferreira Ribeiro

    2014-04-01

    Full Text Available This paper offers an analysis into the external factors influencing the accelerated internationalization of technology-based firms (TBFs in the context of an emerging country, Brazil. This type of firm is typically called born global and has been reported mainly in high technology sectors and from developed countries. A survey was applied to small and medium Brazilian TBFs. Logistic regression was used to test the research hypotheses. The results suggest that new and small Brazilian technology-based firms, which followed an accelerated internationalization process, are most likely to be integrated into a global production chain. Results also show that TBFs which take more than five years to enter the international market, benefit more from the location in an innovation habitat, the partnerships in the home country, and the pro-internationalization government policies. Therefore, this research contributes to a better understanding of the phenomenon and points to new perspectives of studies.

  19. The Emerging Interdependence of the Electric Power Grid & Information and Communication Technology

    Energy Technology Data Exchange (ETDEWEB)

    Taft, Jeffrey D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Becker-Dippmann, Angela S. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-08-01

    This paper examines the implications of emerging interdependencies between the electric power grid and Information and Communication Technology (ICT). Over the past two decades, electricity and ICT infrastructure have become increasingly interdependent, driven by a combination of factors including advances in sensor, network and software technologies and progress in their deployment, the need to provide increasing levels of wide-area situational awareness regarding grid conditions, and the promise of enhanced operational efficiencies. Grid operators’ ability to utilize new and closer-to-real-time data generated by sensors throughout the system is providing early returns, particularly with respect to management of the transmission system for purposes of reliability, coordination, congestion management, and integration of variable electricity resources such as wind generation.

  20. Gen-III/III+ reactors. Solving the future energy supply shortfall. The SWR-1000 option

    International Nuclear Information System (INIS)

    Stosic, Z.V.

    2006-01-01

    Deficiency of non-renewable energy sources, growing demand for electricity and primary energy, increase in population, raised concentration of greenhouse gases in the atmosphere and global warming are the facts which make nuclear energy currently the most realistic option to replace fossil fuels and satisfy global demand. The nuclear power industry has been developing and improving reactor technology for almost five decades and is now ready for the next generation of reactors which should solve the future energy supply shortfall. The advanced Gen-III/III+ (Generation III and/or III+) reactor designs incorporate passive or inherent safety features which require no active controls or operational intervention to manage accidents in the event of system malfunction. The passive safety equipment functions according to basic laws of physics such as gravity and natural convection and is automatically initiated. By combining these passive systems with proven active safety systems, the advanced reactors can be considered to be amongst the safest equipment ever made. Since the beginning of the 90's AREVA NP has been intensively engaged in the design of two advanced Gen-III+ reactors: (i) PWR (Pressurized Water Reactor) EPR (Evolutionary Power Reactor) and (ii) BWR (Boiling Water Reactor) SWR-1000. The SWR-1000 reactor design marks a new era in the successful tradition of BWR technology. It meets the highest safety standards, including control of a core melt accident. This is achieved by supplementing active safety systems with passive safety equipment of diverse design for accident detection and control and by simplifying systems needed for normal plant operation. A short construction period, flexible fuel cycle lengths and a high fuel discharge burn-up contribute towards meeting economic goals. The SWR-1000 completely fulfils international nuclear regulatory requirements. (author)

  1. The role of strategic alliances in creating technology legitimacy: a study on the emerging field of bio-plastics

    NARCIS (Netherlands)

    Kishna, M.J.; Niesten, E.M.M.I.; Negro, S.O.; Hekkert, M.P.

    2015-01-01

    The aim of this study is to analyze the role of strategic alliances in creating legitimacy for an emerging sustainable technology. The literature has identified different ways in which alliances create legitimacy for firms, but it has failed to address the legitimacy of technologies. This paper

  2. A triangular fuzzy TOPSIS-based approach for the application of water technologies in different emergency water supply scenarios.

    Science.gov (United States)

    Qu, Jianhua; Meng, Xianlin; Yu, Huan; You, Hong

    2016-09-01

    Because of the increasing frequency and intensity of unexpected natural disasters, providing safe drinking water for the affected population following a disaster has become a global challenge of growing concern. An onsite water supply technology that is portable, mobile, or modular is a more suitable and sustainable solution for the victims than transporting bottled water. In recent years, various water techniques, such as membrane-assisted technologies, have been proposed and successfully implemented in many places. Given the diversity of techniques available, the current challenge is how to scientifically identify the optimum options for different disaster scenarios. Hence, a fuzzy triangular-based multi-criteria, group decision-making tool was developed in this research. The approach was then applied to the selection of the most appropriate water technologies corresponding to the different emergency water supply scenarios. The results show this tool capable of facilitating scientific analysis in the evaluation and selection of emergency water technologies for enduring security drinking water supply in disaster relief.

  3. Combining internet technology and mobile phones for emergency response management

    International Nuclear Information System (INIS)

    Palsson, S.E.

    2002-12-01

    The report is intended for persons involved in radiological emergency response management. An introduction is given to the technical basis of the mobile Internet and ongoing development summarised. Examples are given describing how mobile Internet technology has been used to improve monitoring media coverage of incidents and events, and a test is described where web based information was selectively processed and made available to WAP enabled mobile phones. The report concludes with recommendations stressing the need for following mobile Internet developments and taking them into account when designing web applications for radiological response management. Doing so can make web based material accessible to mobile devices at minimal additional cost. (au)

  4. Information service on new and emerging health technologies: identification and prioritization processes for a European union-wide newsletter.

    Science.gov (United States)

    Wild, Claudia; Simpson, Sue; Douw, Karla; Geiger-Gritsch, Sabine; Mathis, Stefan; Langer, Thomas

    2009-12-01

    EUnetHTA WP 7 (Strand B) aimed to promote sharing information on new and emerging technologies. The task was to develop a prototype of a newsletter and pilot the processes of production. The EuroScan database served as information source on pertinent technologies. To prioritize, a set of criteria for scoring the potential impact and for selecting the technologies for articles was applied and a pilot newsletter was produced. Being objective and transparent about the content of a newsletter required a method for prioritizing health technologies. Using significance criteria, members of the prioritization panel selected twelve technologies for articles of different length and depth. Potential recipients, surveyed on relevance, content, timeliness, and readability responded mostly positive, but requested more information on cost effectiveness and criticized timeliness. Dissemination of an EU-wide newsletter would be feasible, but time-consuming. Although a newsletter appears to fulfill a need for information on emerging and new health technologies, it is not considered the right tool to avoid duplication of effort in the present international constellation of horizon scanning for new health technologies. Other options will be pursued as part of future collaborative actions, for example, a core set of early awareness information, or an on-demand electronic information system.

  5. Acceptability and perceived utility of drone technology among emergency medical service responders and incident commanders for mass casualty incident management.

    Science.gov (United States)

    Hart, Alexander; Chai, Peter R; Griswold, Matthew K; Lai, Jeffrey T; Boyer, Edward W; Broach, John

    2017-01-01

    This study seeks to understand the acceptability and perceived utility of unmanned aerial vehicle (UAV) technology to Mass Casualty Incidents (MCI) scene management. Qualitative questionnaires regarding the ease of operation, perceived usefulness, and training time to operate UAVs were administered to Emergency Medical Technicians (n = 15). A Single Urban New England Academic Tertiary Care Medical Center. Front-line emergency medical service (EMS) providers and senior EMS personnel in Incident Commander roles. Data from this pilot study indicate that EMS responders are accepting to deploying and operating UAV technology in a disaster scenario. Additionally, they perceived UAV technology as easy to adopt yet impactful in improving MCI scene management.

  6. Generational influences in academic emergency medicine: teaching and learning, mentoring, and technology (part I).

    Science.gov (United States)

    Mohr, Nicholas M; Moreno-Walton, Lisa; Mills, Angela M; Brunett, Patrick H; Promes, Susan B

    2011-02-01

    For the first time in history, four generations are working together-traditionalists, baby boomers, generation Xers (Gen Xers), and millennials. Members of each generation carry with them a unique perspective of the world and interact differently with those around them. Through a review of the literature and consensus by modified Delphi methodology of the Society for Academic Emergency Medicine Aging and Generational Issues Task Force, the authors have developed this two-part series to address generational issues present in academic emergency medicine (EM). Understanding generational characteristics and mitigating strategies can help address some common issues encountered in academic EM. Through recognition of the unique characteristics of each of the generations with respect to teaching and learning, mentoring, and technology, academicians have the opportunity to strategically optimize interactions with one another. © 2011 by the Society for Academic Emergency Medicine.

  7. Impact of new technologies on stress, attrition and well-being in emergency call centers: the NextGeneration 9-1-1 study protocol.

    Science.gov (United States)

    Baseman, Janet; Revere, Debra; Painter, Ian; Stangenes, Scott; Lilly, Michelle; Beaton, Randal; Calhoun, Rebecca; Meischke, Hendrika

    2018-05-04

    Our public health emergency response system relies on the "first of the first responders"-the emergency call center workforce that handles the emergency needs of a public in distress. Call centers across the United States have been preparing for the "Next Generation 9-1-1" initiative, which will allow citizens to place 9-1-1 calls using a variety of digital technologies. The impacts of this initiative on a workforce that is already highly stressed is unknown. There is concern that these technology changes will increase stress, reduce job performance, contribute to maladaptive coping strategies, lower employee retention, or change morale in the workplace. Understanding these impacts to inform approaches for mitigating the health and performance risks associated with new technologies is crucial for ensuring the 911 system fulfills its mission of providing optimal emergency response to the public. Our project is an observational, prospective cohort study framed by the first new technology that will be implemented: text-to-911 calling. Emergency center call takers will be recruited nationwide. Data will be collected by online surveys distributed at each center before text-to-911 implementation; within the first month of implementation; and 6 months after implementation. Primary outcome measures are stress as measured by the Calgary Symptoms of Stress Index, use of sick leave, job performance, and job satisfaction. Primary analyses will use mixed effects regression models and mixed effects logistic regression models to estimate the change in outcome variables associated with text-to-911 implementation. Multiple secondary analyses will examine effects of stress on absenteeism; associations between technology attitudes and stress; effects of implementation on attitudes towards technology; and mitigating effects of job demands, job satisfaction, attitudes towards workplace technology and workplace support on change in stress. Our public health dependence on this workforce

  8. Emerging technologies to measure neighborhood conditions in public health: implications for interventions and next steps.

    Science.gov (United States)

    Schootman, M; Nelson, E J; Werner, K; Shacham, E; Elliott, M; Ratnapradipa, K; Lian, M; McVay, A

    2016-06-23

    Adverse neighborhood conditions play an important role beyond individual characteristics. There is increasing interest in identifying specific characteristics of the social and built environments adversely affecting health outcomes. Most research has assessed aspects of such exposures via self-reported instruments or census data. Potential threats in the local environment may be subject to short-term changes that can only be measured with more nimble technology. The advent of new technologies may offer new opportunities to obtain geospatial data about neighborhoods that may circumvent the limitations of traditional data sources. This overview describes the utility, validity and reliability of selected emerging technologies to measure neighborhood conditions for public health applications. It also describes next steps for future research and opportunities for interventions. The paper presents an overview of the literature on measurement of the built and social environment in public health (Google Street View, webcams, crowdsourcing, remote sensing, social media, unmanned aerial vehicles, and lifespace) and location-based interventions. Emerging technologies such as Google Street View, social media, drones, webcams, and crowdsourcing may serve as effective and inexpensive tools to measure the ever-changing environment. Georeferenced social media responses may help identify where to target intervention activities, but also to passively evaluate their effectiveness. Future studies should measure exposure across key time points during the life-course as part of the exposome paradigm and integrate various types of data sources to measure environmental contexts. By harnessing these technologies, public health research can not only monitor populations and the environment, but intervene using novel strategies to improve the public health.

  9. Factors Related to the Adoption of IT Emerging Technologies by Research and Non-Research Based Higher Education Institutions

    Science.gov (United States)

    Then, Keri Ann; Amaria, Pesi

    2013-01-01

    This study examined the adoption of information technology (IT) emerging technology by higher education institutions with a focus on non-research and research based institutions categorized by Carnegie Mellon classifications that are members of EDUCAUSE, a higher education non-profit organization, whose mission is the use of IT in higher…

  10. Energy and global warming impacts of CFC alternative technologies

    International Nuclear Information System (INIS)

    Fischer, S.K.; Fairchild, P.D.; Hughes, P.J.

    1992-01-01

    Chlorofluorocarbons (CFCs) are used in a number of applications, and volumes of CFCs used grew at a tremendous pace during the 1960s and 1970s. However, in the mid-1980s, it was confirmed that these extremely useful chemicals contribute to the destruction of stratospheric ozone. These chemicals are being phased out of use rapidly to protect the ozone layer and it is very important that the replacements for CFSs do not result in a net increase in global warming by introducing less efficient processes that lead to higher energy use and increased carbon dioxide emissions. A study was conducted to identify those alternative chemicals and technologies that could replace CFCs in energy related applications before the year 2000, and to assess the total potential impact of these alternatives on global warming. The analysis for this project included an estimate of the direct effects from the release of blowing agents, refrigerants, and solvents into the atmosphere and the indirect effects in the form of carbon dioxide emissions resulting from energy use for commercial and residential heating and cooling, household and commercial refrigeration, building and automobile air-conditioning, and general metal and electronics solvent cleaning. The discussion in this paper focuses on those aspects of the study relevant to refrigeration and air-conditioning. In general the use of hydrofluorocarbon (HFC) and hydrochlorofluorocarbon (HCFC) alternatives for CFCs lead to large and sometimes dramatic reduction in total equivalent warming impact (TEWI), lifetime equivalent CO 2 emission. Most of the reductions result from decreased direct effects without significant changes in energy use. 3 refs., 3 figs., 1 tab

  11. Technology acceptance model and the paths to online customer loyalty in an emerging market

    Directory of Open Access Journals (Sweden)

    Nguyen Thi Tuyet Mai

    2013-12-01

    Full Text Available The technology acceptance model (TAM has been well-known for decades. However, the global adoption of the Internet creates new interests in utilizing TAM in e-commerce and the post-consumption intention, especially in emerging markets. Data was collected from 758 online customers via a web-based survey in Vietnam. Particular contribution of the results is that perceived usefulness, perceived ease of use, fairness, trust and the quality of the customer interface have direct or indirect impacts on customer satisfaction and customer loyalty. Moreover, in emerging markets, trust was outlined as the strongest factor contributing to customer satisfaction and leading to customer loyalty.

  12. A call for a community of practice to assess the impact of emerging technologies on undergraduate biology education.

    Science.gov (United States)

    Jensen, Jamie L; Dario-Becker, Juville; Hughes, Lee E; Amburn, D Sue Katz; Shaw, Joyce A

    2012-01-01

    Recent recommendations for educational research encourage empirically tested, theory-based, completely transparent, and broadly applicable studies. In light of these recommendations, we call for a research standard and community of practice in the evaluation of technology use in the undergraduate life science classroom. We outline appropriate research methodology, review and critique the past research on technology usage and, lastly, suggest a new and improved focus for research on emerging technologies.

  13. Diagnosis of dry eye disease and emerging technologies

    Science.gov (United States)

    Zeev, Maya Salomon-Ben; Miller, Darby Douglas; Latkany, Robert

    2014-01-01

    Dry eye is one of the most commonly encountered problems in ophthalmology. Signs can include punctate epithelial erosions, hyperemia, low tear lakes, rapid tear break-up time, and meibomian gland disease. Current methods of diagnosis include a slit-lamp examination with and without different stains, including fluorescein, rose bengal, and lissamine green. Other methods are the Schirmer test, tear function index, tear break-up time, and functional visual acuity. Emerging technologies include meniscometry, optical coherence tomography, tear film stability analysis, interferometry, tear osmolarity, the tear film normalization test, ocular surface thermography, and tear biomarkers. Patient-specific considerations involve relevant history of autoimmune disease, refractive surgery or use of oral medications, and allergies or rosacea. Other patient considerations include clinical examination for lid margin disease and presence of lagophthalmos or blink abnormalities. Given a complex presentation and a variety of signs and symptoms, it would be beneficial if there was an inexpensive, readily available, and reproducible diagnostic test for dry eye. PMID:24672224

  14. Update on Smoking Cessation: E-Cigarettes, Emerging Tobacco Products Trends, and New Technology-Based Interventions.

    Science.gov (United States)

    Das, Smita; Tonelli, Makenzie; Ziedonis, Douglas

    2016-05-01

    Tobacco use disorders (TUDs) continue to be overly represented in patients treated in mental health and addiction treatment settings. It is the most common substance use disorder (SUD) and the leading cause of health disparities and increased morbidity/mortality amongst individuals with a psychiatric disorder. There are seven Food and Drug Administration (FDA) approved medications and excellent evidence-based psychosocial treatment interventions to use in TUD treatment. In the past few years, access to and use of other tobacco or nicotine emerging products are on the rise, including the highly publicized electronic cigarette (e-cigarette). There has also been a proliferation of technology-based interventions to support standard TUD treatment, including mobile apps and web-based interventions. These tools are easily accessed 24/7 to support outpatient treatment. This update will review the emerging products and counter-measure intervention technologies, including how clinicians can integrate these tools and other community-based resources into their practice.

  15. The Virtual Learning Commons: Supporting Science Education with Emerging Technologies

    Science.gov (United States)

    Pennington, D. D.; Gandara, A.; Gris, I.

    2012-12-01

    The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of Semantic Web, mash up, and social networking tools that supports knowledge sharing and innovation across scientific disciplines in research and education communities and networks. The explosion of scientific resources (data, models, algorithms, tools, and cyberinfrastructure) challenges the ability of educators to be aware of resources that might be relevant to their classes. Even when aware, it can be difficult to understand enough about those resources to develop classroom materials. Often emerging data and technologies have little documentation, especially about their application. The VLC tackles this challenge by providing mechanisms for individuals and groups of educators to organize Web resources into virtual collections, and engage each other around those collections in order to a) learn about potentially relevant resources that are available; b) design classes that leverage those resources; and c) develop course syllabi. The VLC integrates Semantic Web functionality for structuring distributed information, mash up functionality for retrieving and displaying information, and social media for discussing/rating information. We are working to provide three views of information that support educators in different ways: 1. Innovation Marketplace: supports users as they find others teaching similar courses, where they are located, and who they collaborate with; 2. Conceptual Mapper: supports educators as they organize their thinking about the content of their class and related classes taught by others; 3. Curriculum Designer: supports educators as they generate a syllabus and find Web resources that are relevant. This presentation will discuss the innovation and learning theories that have informed design of the VLC, hypotheses about the use of emerging technologies to support innovation in classrooms, and will include a

  16. Position-controlled epitaxial III-V nanowires on silicon

    Energy Technology Data Exchange (ETDEWEB)

    Roest, Aarnoud L; Verheijen, Marcel A; Wunnicke, Olaf; Serafin, Stacey; Wondergem, Harry; Bakkers, Erik P A M [Philips Research Laboratories, Professor Holstlaan 4, 5656 AA Eindhoven (Netherlands); Kavli Institute of NanoScience, Delft University of Technology, PO Box 5046, 2600 GA Delft (Netherlands)

    2006-06-14

    We show the epitaxial integration of III-V semiconductor nanowires with silicon technology. The wires are grown by the VLS mechanism with laser ablation as well as metal-organic vapour phase epitaxy. The hetero-epitaxial growth of the III-V nanowires on silicon was confirmed with x-ray diffraction pole figures and cross-sectional transmission electron microscopy. We show preliminary results of two-terminal electrical measurements of III-V nanowires grown on silicon. E-beam lithography was used to predefine the position of the nanowires.

  17. Position-controlled epitaxial III-V nanowires on silicon

    International Nuclear Information System (INIS)

    Roest, Aarnoud L; Verheijen, Marcel A; Wunnicke, Olaf; Serafin, Stacey; Wondergem, Harry; Bakkers, Erik P A M

    2006-01-01

    We show the epitaxial integration of III-V semiconductor nanowires with silicon technology. The wires are grown by the VLS mechanism with laser ablation as well as metal-organic vapour phase epitaxy. The hetero-epitaxial growth of the III-V nanowires on silicon was confirmed with x-ray diffraction pole figures and cross-sectional transmission electron microscopy. We show preliminary results of two-terminal electrical measurements of III-V nanowires grown on silicon. E-beam lithography was used to predefine the position of the nanowires

  18. A Study of Scientometric Methods to Identify Emerging Technologies via Modeling of Milestones

    Energy Technology Data Exchange (ETDEWEB)

    Abercrombie, Robert K [ORNL; Udoeyop, Akaninyene W [ORNL; Schlicher, Bob G [ORNL

    2012-01-01

    This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, patents, news archives, and online mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

  19. Chaos in Kundt Type-III Spacetimes

    International Nuclear Information System (INIS)

    Sakalli, I.; Halilsoy, M.

    2011-01-01

    We consider geodesic motion in a particular Kundt type-III spacetime in which the Einstein-Yang-Mills equations admit the solutions. On a particular surface as constraint, we project the geodesics into the (x, y) plane and treat the problem as a two-dimensional one. Our numerical study shows that chaotic behavior emerges under reasonable conditions. (general)

  20. Opening Digital Archives and Collections with Emerging Data Analytics Technology: A Research Agenda

    Directory of Open Access Journals (Sweden)

    Ahmed Elragal

    2017-02-01

    Full Text Available In the public sector, the EU legislation requires preservation and opening of increasing amounts of heterogeneous digital information that should be utilized by citizens and businesses. While technologies such as big data analytics (BDA have emerged, opening of digital archives and collections at a large scale is in its infancy. Opening archives and collections involve also particular requirements for recognizing and managing issues of privacy and digital rights. As well, ensuring the sustainability of the opened materials and economical appraisal of digital materials for preservation require robust digital preservation practices. We need to proceed beyond the state-of-the-art in opening digital archives and collections through the means of emerging big data analytics and validating a novel concept for analytics which then enables delivering of knowledge for citizens and the society. We set out an agenda for using BDA as our strategy for research and enquiry and for demonstrating the benefit of BDA for opening digital archives by civil servants and for citizens. That will – eventually - transform the preservation practices, and delivery and use opportunities of public digital archives. Our research agenda suggests a framework integrating four domains of inquiry, analytics-enhanced appraisal, analytics-prepared preservation, analytics-enhanced opening, and analytics-enhanced use, for utilizing the BDA technologies in the domain of digital archives and collections. The suggested framework and research agenda identifies initially particular BDA technologies to be utilized in each of the four domains, and contributes by highlighting a need for an integrated “public understanding of big data” in the domain of digital preservation.

  1. A Call for a Community of Practice to Assess the Impact of Emerging Technologies on Undergraduate Biology Education

    Directory of Open Access Journals (Sweden)

    Jamie L. Jensen

    2012-02-01

    Full Text Available Recent recommendations for educational research encourage empirically tested, theory-based, completely transparent, and broadly applicable studies. In light of these recommendations, we call for a research standard and community of practice in the evaluation of technology use in the undergraduate life science classroom. We outline appropriate research methodology, review and critique the past research on technology usage and, lastly, suggest a new and improved focus for research on emerging technologies.

  2. Trypanosoma cruzi III from armadillos (Dasypus novemcinctus novemcinctus) from Northeastern Venezuela and its biological behavior in murine model. Risk of emergency of Chagas' disease.

    Science.gov (United States)

    Morocoima, Antonio; Carrasco, Hernán J; Boadas, Johanna; Chique, José David; Herrera, Leidi; Urdaneta-Morales, Servio

    2012-11-01

    Trypanosoma cruzi, etiological agent of Chagas' disease, was isolated from armadillos (Dasypus novemcinctus novemcinctus) captured in rural communities Northeastern Venezuela from Nueva Esparta State (no endemic for Chagas' disease), Monagas and Anzoátegui States (endemics). The isolates, genetically typed by PCR-RFLP as belonging to the TcIII DTU, have demonstrated in murine model heterogenic parasitemia, mortality and histotropism with marked parasitism in cardiac, skeletal, and smooth myocytes that showed correlation with lymphobasophilic inflammatory infiltrates. Our finding of T. cruzi infected armadillos in Isla Margarita (Nueva Esparta State), together with reports of triatomine vectors in this region, the accentuated synanthropy of armadillos, intense economic activity, migration due to tourism and the lack of environmental education programs all of them represent risks that could cause the emergence of Chagas' disease in this area. This is the first report of the TcIII DTU in Northeastern Venezuela, thus widening the geographic distribution of this DTU. Copyright © 2012 Elsevier Inc. All rights reserved.

  3. The Public and Nanotechnology: How Citizens Make Sense of Emerging Technologies

    International Nuclear Information System (INIS)

    Scheufele, Dietram A.; Lewenstein, Bruce V.

    2005-01-01

    We report findings from a national telephone survey on levels of knowledge about and attitudes toward nanotechnology that demonstrate how people make decisions about emerging technologies. Our findings confirm previous research that suggests that people form opinions and attitudes even in the absence of relevant scientific or policy-related information. In fact, our data show that cognitive shortcuts or heuristics - often provided by mass media - are currently a key factor in influencing how the public thinks about nanotechnology and about its risks and benefits, and in determining the level of support among the public for further funding for research in this area

  4. The Public and Nanotechnology: How Citizens Make Sense of Emerging Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Scheufele, Dietram A. [University of Wisconsin, Madison School of Journalism and Mass Communication (United States)], E-mail: scheufele@wisc.edu; Lewenstein, Bruce V. [Cornell University, Department of Communication and Department of Science and Technology Studies (United States)

    2005-12-15

    We report findings from a national telephone survey on levels of knowledge about and attitudes toward nanotechnology that demonstrate how people make decisions about emerging technologies. Our findings confirm previous research that suggests that people form opinions and attitudes even in the absence of relevant scientific or policy-related information. In fact, our data show that cognitive shortcuts or heuristics - often provided by mass media - are currently a key factor in influencing how the public thinks about nanotechnology and about its risks and benefits, and in determining the level of support among the public for further funding for research in this area.

  5. EMERGING I&C TECHNOLOGIES UNDER THE SHIFTING REGULATORY ENVIRONMENT IN SOUTH KOREA

    Directory of Open Access Journals (Sweden)

    Gyunyoung eHeo

    2015-04-01

    Full Text Available The role of Probabilistic Safety Assessment (PSA has been supplementary and Risk-Informed Applications (RIAs based on the insight from PSA has also been utilized limitedly in the licensing process for Nuclear Power Plants (NPPs in South Korea. However, as the technical significance of PSA is getting increased, PSA has become a mandatory part of Safety Analysis Reports and Periodic Safety Review. It is worthwhile to highlight the role of emerging Instrumentation and Control (I&C technologies including human-machine interface (HMI in developing more credible and realistic PSA models. Particularly, it is expected that the information technology (i.e. software embedded in digital I&C can adjust over- and under conservatism in analyzing risk. In this study, authors proposed the cases which would be able to significantly reduce risk if advanced I&C supported by information technologies is applied. In regard, the several enabling techniques and their effects are proposed. In order to improve the commercial competitiveness of NPPs, the need of collaboration and synergetic outcome of I&C, HMI and PSA should be emphasized.

  6. Emerging I&C Technologies Under the Shifting Regulatory Environment in South Korea

    Energy Technology Data Exchange (ETDEWEB)

    Heo, Gyunyoung [Department of Nuclear Engineering, Kyung Hee University, Youngin-si (Korea, Republic of); Seong, Poong Hyun; Kang, Hyun Gook, E-mail: hyungook@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2015-04-29

    The role of probabilistic safety assessment (PSA) has been supplementary and risk-informed applications based on the insight from PSA have also been utilized limitedly in the licensing process for nuclear power plants (NPPs) in South Korea. However, as the technical significance of PSA is getting increased, PSA has become a mandatory part of Safety Analysis Reports and Periodic Safety Review. It is worthwhile to highlight the role of emerging instrumentation and control (I&C) technologies including human–machine interface (HMI) in developing more credible and realistic PSA models. Particularly, it is expected that the information technology (i.e., software) embedded in digital I&C can adjust over- and under conservatism in analyzing risk. In this study, authors proposed the cases which would be able to significantly reduce risk if advanced I&C supported by information technologies is applied. In regard, the several enabling techniques and their effects are proposed. In order to improve the commercial competitiveness of NPPs, the need of collaboration and synergetic outcome of I&C, HMI, and PSA should be emphasized.

  7. Web technology for emergency medicine and secure transmission of electronic patient records.

    Science.gov (United States)

    Halamka, J D

    1998-01-01

    The American Heritage dictionary defines the word "web" as "something intricately contrived, especially something that ensnares or entangles." The wealth of medical resources on the World Wide Web is now so extensive, yet disorganized and unmonitored, that such a definition seems fitting. In emergency medicine, for example, a field in which accurate and complete information, including patients' records, is urgently needed, more than 5000 Web pages are available today, whereas fewer than 50 were available in December 1994. Most sites are static Web pages using the Internet to publish textbook material, but new technology is extending the scope of the Internet to include online medical education and secure exchange of clinical information. This article lists some of the best Web sites for use in emergency medicine and then describes a project in which the Web is used for transmission and protection of electronic medical records.

  8. Technology-enhanced simulation in emergency medicine: a systematic review and meta-analysis.

    Science.gov (United States)

    Ilgen, Jonathan S; Sherbino, Jonathan; Cook, David A

    2013-02-01

    Technology-enhanced simulation is used frequently in emergency medicine (EM) training programs. Evidence for its effectiveness, however, remains unclear. The objective of this study was to evaluate the effectiveness of technology-enhanced simulation for training in EM and identify instructional design features associated with improved outcomes by conducting a systematic review. The authors systematically searched MEDLINE, EMBASE, CINAHL, ERIC, PsychINFO, Scopus, key journals, and previous review bibliographies through May 2011. Original research articles in any language were selected if they compared simulation to no intervention or another educational activity for the purposes of training EM health professionals (including student and practicing physicians, midlevel providers, nurses, and prehospital providers). Reviewers evaluated study quality and abstracted information on learners, instructional design (curricular integration, feedback, repetitive practice, mastery learning), and outcomes. From a collection of 10,903 articles, 85 eligible studies enrolling 6,099 EM learners were identified. Of these, 56 studies compared simulation to no intervention, 12 compared simulation with another form of instruction, and 19 compared two forms of simulation. Effect sizes were pooled using a random-effects model. Heterogeneity among these studies was large (I(2) ≥ 50%). Among studies comparing simulation to no intervention, pooled effect sizes were large (range = 1.13 to 1.48) for knowledge, time, and skills and small to moderate for behaviors with patients (0.62) and patient effects (0.43; all p 0.1). Qualitative comparisons of different simulation curricula are limited, although feedback, mastery learning, and higher fidelity were associated with improved learning outcomes. Technology-enhanced simulation for EM learners is associated with moderate or large favorable effects in comparison with no intervention and generally small and nonsignificant benefits in comparison

  9. R and D strategy on remote response technology for emergency situations of nuclear facilities in KAERI

    International Nuclear Information System (INIS)

    Jeong, Kyung Min; Cho, Jae Wan; Choi, Young Soo; Eom, Heung Seup; Seo, Yong Chil; Shin, Hoch Ul; Lee, Sung Uk; Kim, Chang Hoi; Jeong, Seung Ho; Kim, Seung Ho

    2012-01-01

    Generally speaking, robotic technologies are anticipated to be very useful for hazardous works in nuclear facilities because robotic systems are relatively immune to radiation exposure. But the application of robotic systems for such environments has not been increasing during past 20 years. Applying highly reliable and conservative 'defense in depth' concepts in the design and construction of NPPs, there is very little probability of accidents occurring or radioactive materials being released into the environments. As a precaution, however NPPs are prepared with emergency response procedures and routinely conduct exercises for post accident circumstances based on these procedures. The last year's accident at the Fukushima Daiichi nuclear power plant promotes the needs for remote response technologies based on mobile robotic system to recognize the internal status and mitigate the unanticipated events of nuclear power plants in emergency situations. For initial observation of reactor buildings two robots named 'PackBot' were used because the internal conditions were unknown so as to allow human workers for entrance into the reactor building. But there were severe limitations for the robots to perform the given tasks from various obstacles and poor visibility inside though they provided crucial information such as views of internal structures, dose level and temperature that supported the decision for human worker's entrance. The application of robots for emergency response tasks for post accidents in nuclear facilities is not a new concept. Robots were sent to recover the damaged reactor at Chernobyl where human workers could have received a lifetime dose of radiation in minutes. Based on NRC's TMI 2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. A robot was used for several years equipped with various tools allowing

  10. R and D strategy on remote response technology for emergency situations of nuclear facilities in KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Kyung Min; Cho, Jae Wan; Choi, Young Soo; Eom, Heung Seup; Seo, Yong Chil; Shin, Hoch Ul; Lee, Sung Uk; Kim, Chang Hoi; Jeong, Seung Ho; Kim, Seung Ho [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    Generally speaking, robotic technologies are anticipated to be very useful for hazardous works in nuclear facilities because robotic systems are relatively immune to radiation exposure. But the application of robotic systems for such environments has not been increasing during past 20 years. Applying highly reliable and conservative 'defense in depth' concepts in the design and construction of NPPs, there is very little probability of accidents occurring or radioactive materials being released into the environments. As a precaution, however NPPs are prepared with emergency response procedures and routinely conduct exercises for post accident circumstances based on these procedures. The last year's accident at the Fukushima Daiichi nuclear power plant promotes the needs for remote response technologies based on mobile robotic system to recognize the internal status and mitigate the unanticipated events of nuclear power plants in emergency situations. For initial observation of reactor buildings two robots named 'PackBot' were used because the internal conditions were unknown so as to allow human workers for entrance into the reactor building. But there were severe limitations for the robots to perform the given tasks from various obstacles and poor visibility inside though they provided crucial information such as views of internal structures, dose level and temperature that supported the decision for human worker's entrance. The application of robots for emergency response tasks for post accidents in nuclear facilities is not a new concept. Robots were sent to recover the damaged reactor at Chernobyl where human workers could have received a lifetime dose of radiation in minutes. Based on NRC's TMI 2 Cleanup Program, several robots were built in the 1980s to help gather information and remove debris from a reactor at the Three Mile Island nuclear power plant that partially melted down in 1979. A robot was used for several years

  11. Measuring risk/benefit perceptions of emerging technologies and their potential impact on communication of public opinion toward science.

    Science.gov (United States)

    Binder, Andrew R; Cacciatore, Michael A; Scheufele, Dietram A; Shaw, Bret R; Corley, Elizabeth A

    2012-10-01

    This study presents a systematic comparison of two alternative measures of citizens' perceptions of risks and benefits of emerging technologies. By focusing on two specific issues (nanotechnology and biofuels), we derive several insights for the measurement of public views of science. Most importantly, our analyses reveal that relying on global, single-item measures may lead to invalid inferences regarding external influences on public perceptions, particularly those related to cognitive schema and media use. Beyond these methodological implications, this analysis suggests several reasons why researchers in the area of public attitudes toward science must revisit notions of measurement in order to accurately inform the general public, policymakers, scientists, and journalists about trends in public opinion toward emerging technologies.

  12. Anticipating ethical issues in emerging IT

    NARCIS (Netherlands)

    Brey, Philip A.E.

    2012-01-01

    In this essay, a new approach to the ethics of emerging information technology will be presented, called anticipatory technology ethics (ATE). The ethics of emerging technology is the study of ethical issues at the R&D and introduction stage of technology development through anticipation of possible

  13. CAD/CAE-technologies application for assessment of passenger safety on railway transport in emergency

    Science.gov (United States)

    Antipin, D. Ya; Shorokhov, S. G.; Bondarenko, O. I.

    2018-03-01

    A possibility of using current software products realizing CAD/CAE-technologies for the assessment of passenger safety in emergency cases on railway transport has been analyzed. On the basis of the developed solid computer model of an anthropometric dummy, the authors carried out an analysis of possible levels of passenger injury during accident collision of a train with an obstacle.

  14. TH-C-BRC-00: Emerging Technologies in SRS/SBRT Delivery

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-06-15

    deliver highly conformal radiosurgery treatments to multiple targets simultaneously via a single isocenter to replace the conventional multi-iso multi-plan treatments. It becomes important to understand the advantages and limitations of this technique, and the pitfalls for implementing this technique in clinical practice. The planning process of single-iso multi-target MAT will be described, and its plan quality and delivery efficiency will be compared with multi-iso plans. The QA process for verifying such complex plans will be illustrated, and pitfalls in imaging and patient set up will be discussed. Overall, this session will focus on the following areas: 1) Update on the emerging technology in current SRS/SBRT delivery. 2) New developments in treatment planning and Quality Assurance program. 3) Imaging guidance and motion management. Learning Objectives: To understand the SRS/SBRT principles and its clinical applications, and gain knowledge on the emerging technologies in SRS/SBRT. To review planning concepts and useful tips in treatment planning. To learn about the imaging guidance procedures and the quality assurance program in SRS/SBRT. National Institutes of Health, Varian Medical System; L. Ren, The presenter is funded by National Institutes of Health and Varian Medical System.

  15. TH-C-BRC-00: Emerging Technologies in SRS/SBRT Delivery

    International Nuclear Information System (INIS)

    2016-01-01

    deliver highly conformal radiosurgery treatments to multiple targets simultaneously via a single isocenter to replace the conventional multi-iso multi-plan treatments. It becomes important to understand the advantages and limitations of this technique, and the pitfalls for implementing this technique in clinical practice. The planning process of single-iso multi-target MAT will be described, and its plan quality and delivery efficiency will be compared with multi-iso plans. The QA process for verifying such complex plans will be illustrated, and pitfalls in imaging and patient set up will be discussed. Overall, this session will focus on the following areas: 1) Update on the emerging technology in current SRS/SBRT delivery. 2) New developments in treatment planning and Quality Assurance program. 3) Imaging guidance and motion management. Learning Objectives: To understand the SRS/SBRT principles and its clinical applications, and gain knowledge on the emerging technologies in SRS/SBRT. To review planning concepts and useful tips in treatment planning. To learn about the imaging guidance procedures and the quality assurance program in SRS/SBRT. National Institutes of Health, Varian Medical System; L. Ren, The presenter is funded by National Institutes of Health and Varian Medical System.

  16. Emerging Technologies Program Integration Report. Volume 2. Background, Delphi and Workshop Data. Appendices

    Science.gov (United States)

    1987-05-04

    Celanese Research Co.) Dr. William Koros (U. Texas/Austin) Dr. Raphael Ottenbrite (Virginia Commonwealth U.) Dr. Elsa Reichmanis (AT&T Bell Labs.) Dr. John...processing elements in a single chip focal plane array 1621 1 71 4 23 5. Synchrotron radiation source X-ray lithography 5 1 2 1316 2 1 7 8 6. Growth... SYNCHROTRON RADIATION SOURCE X-RAY LITHOGRAPHY A. Specific milestones/research developments that must occur for AVAILABILITY: this emerging technology

  17. Vero cell technology for rapid development of inactivated whole virus vaccines for emerging viral diseases.

    Science.gov (United States)

    Barrett, P Noel; Terpening, Sara J; Snow, Doris; Cobb, Ronald R; Kistner, Otfried

    2017-09-01

    Rapid development and production of vaccines against emerging diseases requires well established, validated, robust technologies to allow industrial scale production and accelerated licensure of products. Areas covered: A versatile Vero cell platform has been developed and utilized to deliver a wide range of candidate and licensed vaccines against emerging viral diseases. This platform builds on the 35 years' experience and safety record with inactivated whole virus vaccines such as polio vaccine. The current platform has been optimized to include a novel double inactivation procedure in order to ensure a highly robust inactivation procedure for novel emerging viruses. The utility of this platform in rapidly developing inactivated whole virus vaccines against pandemic (-like) influenza viruses and other emerging viruses such as West Nile, Chikungunya, Ross River and SARS is reviewed. The potential of the platform for development of vaccines against other emerging viruses such as Zika virus is described. Expert commentary: Use of this platform can substantially accelerate process development and facilitate licensure because of the substantial existing data set available for the cell matrix. However, programs to provide vaccines against emerging diseases must allow alternative clinical development paths to licensure, without the requirement to carry out large scale field efficacy studies.

  18. III-nitride semiconductors and their modern devices

    CERN Document Server

    2013-01-01

    This book is dedicated to GaN and its alloys AlGaInN (III-V nitrides), semiconductors with intrinsic properties well suited for visible and UV light emission and electronic devices working at high temperature, high frequency, and harsh environments. There has been a rapid growth in the industrial activity relating to GaN, with GaN now ranking at the second position (after Si) among all semiconductors. This is mainly thanks to LEDs, but also to the emergence of lasers and high power and high frequency electronics. GaN-related research activities are also diversifying, ranging from advanced optical sources and single electron devices to physical, chemical, and biological sensors, optical detectors, and energy converters. All recent developments of nitrides and of their technology are gathered here in a single volume, with chapters written by world leaders in the field. This third book of the series edited by B. Gil is complementary to the preceding two, and is expected to offer a modern vision of nitrides and...

  19. On the Emergence and Diffusion of Technological Capabilities and the Theory of the MNC

    DEFF Research Database (Denmark)

    Blomkvist, Katarina; Kappen, Philip; Zander, Ivo

    2015-01-01

    This paper intersects extant theories of the MNC with empirically observed patterns in the intra-company emergence and diffusion of technological capabilities. It draws upon a database containing the complete patenting history of 24 Swedish multinationals over the 1890-2008 period, which allows...... as distinctive and differentiated diffusion patterns across headquarters, greenfield subsidiaries, and acquired units in the MNC group. We conclude that a theory of the MNC should recognize the shift towards more equal conditions for the generation of new technology within the multinational organization......, but that within this overall development some conspicuous inequalities in intra-company capability dif-fusion remain to be accounted for....

  20. Emerging technologies in education and training: applications for the laboratory animal science community.

    Science.gov (United States)

    Ketelhut, Diane Jass; Niemi, Steven M

    2007-01-01

    This article examines several new and exciting communication technologies. Many of the technologies were developed by the entertainment industry; however, other industries are adopting and modifying them for their own needs. These new technologies allow people to collaborate across distance and time and to learn in simulated work contexts. The article explores the potential utility of these technologies for advancing laboratory animal care and use through better education and training. Descriptions include emerging technologies such as augmented reality and multi-user virtual environments, which offer new approaches with different capabilities. Augmented reality interfaces, characterized by the use of handheld computers to infuse the virtual world into the real one, result in deeply immersive simulations. In these simulations, users can access virtual resources and communicate with real and virtual participants. Multi-user virtual environments enable multiple participants to simultaneously access computer-based three-dimensional virtual spaces, called "worlds," and to interact with digital tools. They allow for authentic experiences that promote collaboration, mentoring, and communication. Because individuals may learn or train differently, it is advantageous to combine the capabilities of these technologies and applications with more traditional methods to increase the number of students who are served by using current methods alone. The use of these technologies in animal care and use programs can create detailed training and education environments that allow students to learn the procedures more effectively, teachers to assess their progress more objectively, and researchers to gain insights into animal care.

  1. Application of GRA method, dynamic analysis and fuzzy set theory in evaluation and selection of emergency treatment technology for large scale phenol spill incidents

    Science.gov (United States)

    Zhao, Jingjing; Yu, Lean; Li, Lian

    2017-05-01

    Select an appropriate technology in an emergency response is a very important issue with various kinds of chemical contingency spills frequently taking place. Due to the complexity, fuzziness and uncertainties of the chemical contingency spills, the theory of GRA method, dynamic analysis combined with fuzzy set theory will be appropriately applied to selection and evaluation of emergency treatment technology. Finally, a emergency phenol spill accidence occurred in highway is provided to illustrate the applicability and feasibility of the proposed methods.

  2. Collective movement in ecology: from emerging technologies to conservation and management.

    Science.gov (United States)

    Westley, Peter A H; Berdahl, Andrew M; Torney, Colin J; Biro, Dora

    2018-05-19

    Recent advances in technology and quantitative methods have led to the emergence of a new field of study that stands to link insights of researchers from two closely related, but often disconnected disciplines: movement ecology and collective animal behaviour. To date, the field of movement ecology has focused on elucidating the internal and external drivers of animal movement and the influence of movement on broader ecological processes. Typically, tracking and/or remote sensing technology is employed to study individual animals in natural conditions. By contrast, the field of collective behaviour has quantified the significant role social interactions play in the decision-making of animals within groups and, to date, has predominantly relied on controlled laboratory-based studies and theoretical models owing to the constraints of studying interacting animals in the field. This themed issue is intended to formalize the burgeoning field of collective movement ecology which integrates research from both movement ecology and collective behaviour. In this introductory paper, we set the stage for the issue by briefly examining the approaches and current status of research in these areas. Next, we outline the structure of the theme issue and describe the obstacles collective movement researchers face, from data acquisition in the field to analysis and problems of scale, and highlight the key contributions of the assembled papers. We finish by presenting research that links individual and broad-scale ecological and evolutionary processes to collective movement, and finally relate these concepts to emerging challenges for the management and conservation of animals on the move in a world that is increasingly impacted by human activity.This article is part of the theme issue 'Collective movement ecology'. © 2018 The Author(s).

  3. Pop-up Library Makerspace: academic libraries provide flexible, supportive space to explore emerging technologies.

    OpenAIRE

    Groves, Antony

    2016-01-01

    The word Makerspace is a general term for a place where people get together to make things, create things and\\ud learn together. Antony Groves presents a look at a recent university library experiment hosting a pop-up makerspace. Working with local edtech leaders MakerClub and colleagues the library organised a two-hour workshop which offered the opportunity for students and staff to explore emerging technologies.

  4. The 1995 Goddard Conference on Space Applications of Artificial Intelligence and Emerging Information Technologies

    Science.gov (United States)

    Hostetter, Carl F. (Editor)

    1995-01-01

    This publication comprises the papers presented at the 1995 Goddard Conference on Space Applications of Artificial Intelligence and Emerging Information Technologies held at the NASA/Goddard Space Flight Center, Greenbelt, Maryland, on May 9-11, 1995. The purpose of this annual conference is to provide a forum in which current research and development directed at space applications of artificial intelligence can be presented and discussed.

  5. Silicon-Based Integration of Groups III, IV, V Chemical Vapor Depositions in High-Quality Photodiodes

    NARCIS (Netherlands)

    Sammak, A.

    2012-01-01

    Heterogeneous integration of III-V semiconductors with silicon (Si) technology is an interesting approach to utilize the advantages of both high-speed photonic and electronic properties. The work presented in this thesis is initiated by this major goal of merging III-V semiconductor technology with

  6. A new methodology for strategic planning using technological maps and detection of emerging research fronts applied to radiopharmacy

    International Nuclear Information System (INIS)

    Didio, Robert Joseph

    2011-01-01

    This research aims the development of a new methodology to support the strategic planning, using the process of elaboration of technological maps (TRM - Technological Roadmaps), associated with application of the detection process of emerging fronts of research in databases of scientific publications and patents. The innovation introduced in this research is the customization of the process of TRM to the radiopharmacy and, specifically, its association to the technique of detection of emerging fronts of research, in order to prove results and to establish a new and very useful methodology to the strategic planning of this area of businesses. The business unit DIRF - Diretoria de Radiofarmacia - of IPEN CNEN/SP was used as base of the study and implementation of this methodology presented in this work. (author)

  7. Technology Entrepreneurship in Emerging Markets: An Exploration of Entrepreneurial Models Prevalent in India

    Directory of Open Access Journals (Sweden)

    Shiv S Tripathi

    2018-01-01

    Full Text Available Are the features and processes of entrepreneurship – such as wealth creation, risk taking, vision, identification of a niche market, launching new products, and so on – common across the world? Many would assume they would be. However, firms that are entrepreneurial in nature and belong to emerging markets may or may not follow the established models of developed economies. In this study, we sought to explore various types of entrepreneurial models that are prevalent in an emerging market. For this purpose, we collected primary and secondary data to identify characteristics of technology-based entrepreneurial firms in India. Based on the two dimensions of degree of demand/supply and expected loss/risk, we identify four models of entrepreneurship – incremental, proactive, radical, and reactive – and illustrate each model with examples from Indian companies.

  8. A review of existing and emerging digital technologies to combat the global trade in fake medicines.

    Science.gov (United States)

    Mackey, Tim K; Nayyar, Gaurvika

    2017-05-01

    The globalization of the pharmaceutical supply chain has introduced new challenges, chief among them, fighting the international criminal trade in fake medicines. As the manufacture, supply, and distribution of drugs becomes more complex, so does the need for innovative technology-based solutions to protect patients globally. Areas covered: We conducted a multidisciplinary review of the science/health, information technology, computer science, and general academic literature with the aim of identifying cutting-edge existing and emerging 'digital' solutions to combat fake medicines. Our review identified five distinct categories of technology including mobile, radio frequency identification, advanced computational methods, online verification, and blockchain technology. Expert opinion: Digital fake medicine solutions are unifying platforms that integrate different types of anti-counterfeiting technologies as complementary solutions, improve information sharing and data collection, and are designed to overcome existing barriers of adoption and implementation. Investment in this next generation technology is essential to ensure the future security and integrity of the global drug supply chain.

  9. MALDI-TOF mass spectrometry: an emerging technology for microbial identification and diagnosis.

    Science.gov (United States)

    Singhal, Neelja; Kumar, Manish; Kanaujia, Pawan K; Virdi, Jugsharan S

    2015-01-01

    Currently microorganisms are best identified using 16S rRNA and 18S rRNA gene sequencing. However, in recent years matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has emerged as a potential tool for microbial identification and diagnosis. During the MALDI-TOF MS process, microbes are identified using either intact cells or cell extracts. The process is rapid, sensitive, and economical in terms of both labor and costs involved. The technology has been readily imbibed by microbiologists who have reported usage of MALDI-TOF MS for a number of purposes like, microbial identification and strain typing, epidemiological studies, detection of biological warfare agents, detection of water- and food-borne pathogens, detection of antibiotic resistance and detection of blood and urinary tract pathogens etc. The limitation of the technology is that identification of new isolates is possible only if the spectral database contains peptide mass fingerprints of the type strains of specific genera/species/subspecies/strains. This review provides an overview of the status and recent applications of mass spectrometry for microbial identification. It also explores the usefulness of this exciting new technology for diagnosis of diseases caused by bacteria, viruses, and fungi.

  10. Industrial Arts Test Development, Book III. Resource Items for Graphics Technology, Power Technology, Production Technology.

    Science.gov (United States)

    New York State Education Dept., Albany.

    This booklet is designed to assist teachers in developing examinations for classroom use. It is a collection of 955 objective test questions, mostly multiple choice, for industrial arts students in the three areas of graphics technology, power technology, and production technology. Scoring keys are provided. There are no copyright restrictions,…

  11. Genetic diversity of methicillin resistant Staphylococcus aureus strains isolated from burn patients in Iran: ST239-SCCmec III/t037 emerges as the major clone.

    Science.gov (United States)

    Goudarzi, Mehdi; Bahramian, Mahnaz; Satarzadeh Tabrizi, Mahboobeh; Udo, Edet E; Figueiredo, Agnes Marie Sá; Fazeli, Maryam; Goudarzi, Hossein

    2017-04-01

    Methicillin-resistant Staphylococcus aureus (MRSA) as a major cause of infection in health care, hospital and community settings is a global health concern. The purpose of this study was to determine the antibiotic susceptibility pattern and distribution of circulating molecular types of MRSA in a burn hospital in Tehran, the capital of Iran. During a 10-month study period, 106 Staphylococcus aureus isolates were assessed. Isolates were subjected to susceptibility testing using the disk diffusion method and Polymerase Chain Reaction (PCR) for detection of mecA, fem and nuc genes. The presence of PVL and tst encoding genes were determined by PCR method. All the MRSA isolates were genotyped by multilocus sequence typing (MLST), spa typing, SCCmec typing and agr typing. The presence of mecA gene was confirmed in all the Staphylococcus aureus isolates. Antimicrobial susceptibility testing revealed a high resistance rate (90.6%) to ampicillin, tetracycline, and erythromycin. The rates of resistance to remaining antibiotics tested varied between 18.9% and 84.9%. The high- level of resistance to mupirocin was confirmed in 19.8% of MRSA strains isolated from burn patients. Multi-drug resistance was observed in 90.6% of isolates. Sixteen of the 106 MRSA isolates (15.1%) harbored PVL-encoding genes. The majority of our MRSA strains carried SCCmec III (71.7%). ST239-SCCmec III/t037 (34%) was the most common genotype followed by ST239-SCCmec III/t030 (24.5%), ST15-SCCmec IV/t084 (15.1%), ST22-SCCmec IV/t790 (13.2%), and ST239-SCCmec III/t631 (13.2%). Mupirocin resistant MRSA isolates belonged to ST15-SCCmec IV/t084 (40%), ST22-SCCmec IV/t790 (23.3%), ST239-SCCmec III/t631 (20%), and ST239-SCCmec III/t030 (16.7%) clones. The results showed that genetically diverse strains of MRSA are circulating in our burn hospitals with relatively high prevalence of ST239-SCCmec III/t037 clone. The findings support the need for regular surveillance of MRSA to determine the distribution of

  12. Emerging boom in nano magnetic particle incorporated high-Tc superconducting materials and technologies - A South African perspective

    CSIR Research Space (South Africa)

    Srinivasu, VV

    2009-01-01

    Full Text Available With a strategy to establish and embrace the emerging nano particle incorporated superconductivity technology (based on the HTS materials and nano magnetic particles) in South Africa, the author has initiated the following research activity in South...

  13. A view from Cheyenne Mountain: Generation III's perspective of Keystone III.

    Science.gov (United States)

    Bliss, Erika; Cadwallader, Kara; Steyer, Terrence E; Clements, Deborah S; Devoe, Jennifer E; Fink, Kenneth; Khubesrian, Marina; Lyons, Paul; Steiner, Elizabeth; Weismiller, David

    2014-01-01

    In October 2000 the family of family medicine convened the Keystone III conference at Cheyenne Mountain Resort. Keystone III participants included members of Generation I (entered practice before 1970), Generation II (entered 1970-1990), and Generation III (entered after 1990). They represented a wide range of family physicians, from medical students to founders of the discipline, and from small-town solo practice to academic medicine. During the conference, the three generations worked together and separately thinking about the past, present, and future of family medicine, our roles in it, and how the understanding of a family physician and our discipline had and would continue to evolve. After the conference, the 10 Generation III members wrote the article published here, reflecting on our experiences as new physicians and physicians in training, and the similarities and differences between our experiences and those of physicians in Generations I and II. Key similarities included commitment to whole-person care, to a wide scope of practice, to community health, and to ongoing engagement with our discipline. Key differences included our understanding of availability, the need for work-life balance, the role of technology in the physician-patient relationship, and the perceptions of the relationship between medicine and a range of outside forces such as insurance and government. This article, presented with only minor edits, thus reflects accurately our perceptions in late 2000. The accompanying editorial reflects our current perspective.

  14. Isothiocyanato complexes of Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl)benzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Mishra, A; Singh, V K

    1982-01-01

    Six-coordinated complexes of the type (Ln(PyBzH)/sub 2/NCS.H/sub 2/O) (NCS)/sub 2/.nH/sub 2/O/mC/sub 2/H/sub 5/OH (Ln = Gd(III), Tb(III), Dy(III) and Ho(III), n=1-2; m=1) have been prepared from Ln(NCS)/sub 6//sup 3 -/. The room temperature magnetic moment values confirm the terpositive state of the lanthanide ions. Infrared spectra suggest the N-coordination of thiocyanate group. Electronic spectral studies of Tb(III), Dy(III) and Ho(III) complexes have been made in terms of LSJ term energies. 13 refs.

  15. Virtual Reality and Its Potential Use in Special Education. Identifying Emerging Issues and Trends in Technology for Special Education.

    Science.gov (United States)

    Woodward, John

    As part of a 3-year study to identify emerging issues and trends in technology for special education, this paper addresses the possible contributions of virtual reality technology to educational services for students with disabilities. An example of the use of virtual reality in medical imaging introduces the paper and leads to a brief review of…

  16. Emerging and Disruptive Technologies for Education: An Analysis of Planning, Implementation, and Diffusion in Florida's Eleven State University System Institutions

    Science.gov (United States)

    Bradford, Deborah J.

    2010-01-01

    The purpose of the study was to understand and appreciate the methodologies and procedures used in determining the extent to which an information technology (IT) organization within the eleven member State University Systems (SUS) of Florida planned, implemented, and diffused emerging educational technologies. Key findings found how critical it…

  17. The process of implementation of emergency care units in Brazil.

    Science.gov (United States)

    O'Dwyer, Gisele; Konder, Mariana Teixeira; Reciputti, Luciano Pereira; Lopes, Mônica Guimarães Macau; Agostinho, Danielle Fernandes; Alves, Gabriel Farias

    2017-12-11

    To analyze the process of implementation of emergency care units in Brazil. We have carried out a documentary analysis, with interviews with twenty-four state urgency coordinators and a panel of experts. We have analyzed issues related to policy background and trajectory, players involved in the implementation, expansion process, advances, limits, and implementation difficulties, and state coordination capacity. We have used the theoretical framework of the analysis of the strategic conduct of the Giddens theory of structuration. Emergency care units have been implemented after 2007, initially in the Southeast region, and 446 emergency care units were present in all Brazilian regions in 2016. Currently, 620 emergency care units are under construction, which indicates expectation of expansion. Federal funding was a strong driver for the implementation. The states have planned their emergency care units, but the existence of direct negotiation between municipalities and the Union has contributed with the significant number of emergency care units that have been built but that do not work. In relation to the urgency network, there is tension with the hospital because of the lack of beds in the country, which generates hospitalizations in the emergency care unit. The management of emergency care units is predominantly municipal, and most of the emergency care units are located outside the capitals and classified as Size III. The main challenges identified were: under-funding and difficulty in recruiting physicians. The emergency care unit has the merit of having technological resources and being architecturally differentiated, but it will only succeed within an urgency network. Federal induction has generated contradictory responses, since not all states consider the emergency care unit a priority. The strengthening of the state management has been identified as a challenge for the implementation of the urgency network.

  18. The process of implementation of emergency care units in Brazil

    Directory of Open Access Journals (Sweden)

    Gisele O'Dwyer

    2017-12-01

    Full Text Available ABSTRACT OBJECTIVE To analyze the process of implementation of emergency care units in Brazil. METHODS We have carried out a documentary analysis, with interviews with twenty-four state urgency coordinators and a panel of experts. We have analyzed issues related to policy background and trajectory, players involved in the implementation, expansion process, advances, limits, and implementation difficulties, and state coordination capacity. We have used the theoretical framework of the analysis of the strategic conduct of the Giddens theory of structuration. RESULTS Emergency care units have been implemented after 2007, initially in the Southeast region, and 446 emergency care units were present in all Brazilian regions in 2016. Currently, 620 emergency care units are under construction, which indicates expectation of expansion. Federal funding was a strong driver for the implementation. The states have planned their emergency care units, but the existence of direct negotiation between municipalities and the Union has contributed with the significant number of emergency care units that have been built but that do not work. In relation to the urgency network, there is tension with the hospital because of the lack of beds in the country, which generates hospitalizations in the emergency care unit. The management of emergency care units is predominantly municipal, and most of the emergency care units are located outside the capitals and classified as Size III. The main challenges identified were: under-funding and difficulty in recruiting physicians. CONCLUSIONS The emergency care unit has the merit of having technological resources and being architecturally differentiated, but it will only succeed within an urgency network. Federal induction has generated contradictory responses, since not all states consider the emergency care unit a priority. The strengthening of the state management has been identified as a challenge for the implementation of the

  19. How to assess the availability of resources for new technologies? Case study: lithium a strategic metal for emerging technologies

    International Nuclear Information System (INIS)

    Weil, M.; Ziemann, S.; Schebek, L.

    2009-01-01

    The development of new technologies is often connected with the use of non-renewable resources. In recent years a qualitative shift in the demand of bulk metals (e.g. Fe, Al, Cu) to more scarce metals (e.g. Te, Ga, Re) is recognizable. Novel technologies and products rely more and more on very specific metals which are indispensable for their function. Although such metals are generally used in low concentrations in products, the demand has raised significantly due to mass production. Some of them are of high importance due to their strategic relevance to emerging innovative technologies. Lithium so far has gained relatively little attention, although it fulfills the main criteria of a strategically relevant metal. In recent years, however, recognition of lithium increased as a result of the growing market for lithium-based chargeable batteries in mobile information/communication consumer products and in electric vehicles. Both areas of demand led to a skyrocketed use of lithium in recent years. Other technologies in the future like fusion power generation will raise lithium consumption at an accelerated rate. It is therefore necessary to determine the availability of lithium in the medium and long term in order to prevent technology failures and to ensure a more sustainable development. The authors will provide a well founded knowledge base, outline the availability of worldwide reserves and resources, and describe the structure of present and future demands for lithium. (authors)

  20. Emerging technologies

    Energy Technology Data Exchange (ETDEWEB)

    Mogensen, A.C. [Demand Data Services Inc., Calgary, AB (Canada)

    2001-06-01

    This paper addressed the issue of how the petroleum industry can prepare itself with regards to the imminent changes in communication mechanisms as the Internet and World-Wide-Web are being accepted as the norm for all technical and scientific information services. In particular, the paper focused on new technologies for data acquisition, well site monitoring and data analysis where information is gathered from a remote site to the office. The paper also reviewed modeling concepts which show that secure and dependable data communications can disseminate information to personnel within an organization to make informed decisions and reduce response time. The topic is particularly relevant to the petroleum industry as fluctuations in oil and gas pricing, global competition, environmental policy, and government monetary and fiscal policy have forced companies to change the way they conduct business. Security issues associated with data communication were also addressed. 3 refs., 6 figs.

  1. A mechanism for proven technology foresight for emerging fast reactor designs and concepts

    International Nuclear Information System (INIS)

    Anuar, Nuraslinda; Muhamad Pauzi, Anas

    2016-01-01

    The assessment of emerging nuclear fast reactor designs and concepts viability requires a combination of foresight methods. A mechanism that allows for the comparison and quantification of the possibility of being a proven technology in the future, β for the existing fast reactor designs and concepts is proposed as one of the quantitative foresight method. The methodology starts with the identification at the national or regional level, of the factors that would affect β. The factors are then categorized into several groups; economic, social and technology elements. Each of the elements is proposed to be mathematically modelled before all of the elemental models can be combined. Once the overall β model is obtained, the β min is determined to benchmark the acceptance as a candidate design or concept. The β values for all the available designs and concepts are then determined and compared with the β min , resulting in a list of candidate designs that possess the β value that is larger than the β min . The proposed methodology can also be applied to purposes other than technological foresight

  2. A mechanism for proven technology foresight for emerging fast reactor designs and concepts

    Energy Technology Data Exchange (ETDEWEB)

    Anuar, Nuraslinda, E-mail: nuraslinda@uniten.edu.my; Muhamad Pauzi, Anas, E-mail: anas@uniten.edu.my [College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia)

    2016-01-22

    The assessment of emerging nuclear fast reactor designs and concepts viability requires a combination of foresight methods. A mechanism that allows for the comparison and quantification of the possibility of being a proven technology in the future, β for the existing fast reactor designs and concepts is proposed as one of the quantitative foresight method. The methodology starts with the identification at the national or regional level, of the factors that would affect β. The factors are then categorized into several groups; economic, social and technology elements. Each of the elements is proposed to be mathematically modelled before all of the elemental models can be combined. Once the overall β model is obtained, the β{sub min} is determined to benchmark the acceptance as a candidate design or concept. The β values for all the available designs and concepts are then determined and compared with the β{sub min}, resulting in a list of candidate designs that possess the β value that is larger than the β{sub min}. The proposed methodology can also be applied to purposes other than technological foresight.

  3. Emerging Technologies and Generic Assays for the Detection of Anti-Drug Antibodies

    Directory of Open Access Journals (Sweden)

    Michael A. Partridge

    2016-01-01

    Full Text Available Anti-drug antibodies induced by biologic therapeutics often impact drug pharmacokinetics, pharmacodynamics response, clinical efficacy, and patient safety. It is critical to assess the immunogenicity risk of potential biotherapeutics in producing neutralizing and nonneutralizing anti-drug antibodies, especially in clinical phases of drug development. Different assay methodologies have been used to detect all anti-drug antibodies, including ELISA, radioimmunoassay, surface plasmon resonance, and electrochemiluminescence-based technologies. The most commonly used method is a bridging assay, performed in an ELISA or on the Meso Scale Discovery platform. In this report, we aim to review the emerging new assay technologies that can complement or address challenges associated with the bridging assay format in screening and confirmation of ADAs. We also summarize generic anti-drug antibody assays that do not require drug-specific reagents for nonclinical studies. These generic assays significantly reduce assay development efforts and, therefore, shorten the assay readiness timeline.

  4. Plasmonics for emerging quantum technologies

    DEFF Research Database (Denmark)

    Bozhevolnyi, Sergey I.; Mortensen, N. Asger

    2017-01-01

    to exponentially increase computing power, quantum computing opens up possibilities to carry out calculations that ordinary computers could not finish in the lifetime of the Universe, while optical communications based on quantum cryptography become completely secure. At the same time, the emergence of Big Data...

  5. Regulatory uncertainty and the associated business risk for emerging technologies

    International Nuclear Information System (INIS)

    Hoerr, Robert A.

    2011-01-01

    An oversight system specifically concerned with nanomaterials should be flexible enough to take into account the unique aspects of individual novel materials and the settings in which they might be used, while recognizing that heretofore unrecognized safety issues may require future modifications. This article considers a question not explicitly considered by the project team: what is the risk that uncertainty over how regulatory oversight will be applied to nanomaterials will delay or block the development of this emerging technology, thereby depriving human health of potential and substantial benefits? An ambiguous regulatory environment could delay the availability of valuable new technology and therapeutics for human health by reducing access to investment capital. Venture capitalists list regulatory uncertainty as a major reason not to invest at all in certain areas. Uncertainty is far more difficult to evaluate than risk, which lends itself to quantitative models and can be factored into projections of return on possible investments. Loss of time has a large impact on investment return. An examination of regulatory case histories suggests that an increase in regulatory resting requirement, where the path is well-defined, is far less costly than a delay of a year or more in achieving product approval and market launch.

  6. Regulatory uncertainty and the associated business risk for emerging technologies

    Science.gov (United States)

    Hoerr, Robert A.

    2011-04-01

    An oversight system specifically concerned with nanomaterials should be flexible enough to take into account the unique aspects of individual novel materials and the settings in which they might be used, while recognizing that heretofore unrecognized safety issues may require future modifications. This article considers a question not explicitly considered by the project team: what is the risk that uncertainty over how regulatory oversight will be applied to nanomaterials will delay or block the development of this emerging technology, thereby depriving human health of potential and substantial benefits? An ambiguous regulatory environment could delay the availability of valuable new technology and therapeutics for human health by reducing access to investment capital. Venture capitalists list regulatory uncertainty as a major reason not to invest at all in certain areas. Uncertainty is far more difficult to evaluate than risk, which lends itself to quantitative models and can be factored into projections of return on possible investments. Loss of time has a large impact on investment return. An examination of regulatory case histories suggests that an increase in regulatory resting requirement, where the path is well-defined, is far less costly than a delay of a year or more in achieving product approval and market launch.

  7. What dental educators need to understand about emerging technologies to incorporate them effectively into the educational process.

    Science.gov (United States)

    Stein, Corey D; Eisenberg, Elise S; O'Donnell, Jean A; Spallek, Heiko

    2014-04-01

    Many dental schools are currently struggling with the adoption of emerging technologies and the incorporation of these technologies into the educational process. Dental students exhibit an increasing degree of digital comfort when using social networking, mobile devices, search engines, or e-textbooks. Although the majority of students might consider themselves to be very skilled at using information technology, many faculty members would claim the opposite when evaluating their own knowledge and skills in the use of technology. As the use of technology, both formally and informally, continues to increase, dental educators are faced with many questions, such as: Does students' digital comfort disguise a lack of information literacy? What is the appropriate path of implementing technology into teaching and learning, and how can institutions support such an implementation? This article surveys a series of myths that exist about the use of technology in education and raises questions about their validity and how dental educators can avoid being misled by them.

  8. Generational Influences in Academic Emergency Medicine: Teaching and Learning, Mentoring, and Technology (Part I)

    Science.gov (United States)

    Mohr, Nicholas M.; Moreno-Walton, Lisa; Mills, Angela M.; Brunett, Patrick H.; Promes, Susan B.

    2010-01-01

    For the first time in history, four generations are working together – Traditionalists, Baby Boomers, Generation Xers, and Millennials. Members of each generation carry with them a unique perspective of the world and interact differently with those around them. Through a review of the literature and consensus by modified Delphi methodology of the Society for Academic Emergency Medicine (SAEM) Aging and Generational Issues Task Force, the authors have developed this two-part series to address generational issues present in academic emergency medicine (EM). Understanding generational characteristics and mitigating strategies can help address some common issues encountered in academic EM. Through recognition of the unique characteristics of each of the generations with respect to teaching and learning, mentoring, and technology, academicians have the opportunity to strategically optimize interactions with one another. PMID:21314779

  9. Microstructure of III-N semiconductors related to their applications in optoelectronics

    Science.gov (United States)

    Leszczynski, M.; Czernetzki, R.; Sarzynski, M.; Krysko, M.; Targowski, G.; Prystawko, P.; Bockowski, M.; Grzegory, I.; Suski, T.; Domagala, J.; Porowski, S.

    2005-03-01

    There has been more than a decade since Shuji Nakamura from Japanese company Nichia constructed the first blue LED based on structure of (AlGaIn)N semiconductor and eight years since he made the first blue laser diode (LD). This work gives a survey on the current technological status with green/blue/violet/UV optoelectronics based on III-N semiconductors in relation with their microstructure. The following devices are presented: i) Low-power green and blue LEDs, ii) High-power LEDs targeting solid-state white lighting, iii) Low-power violet LDs for high definition DVD market, iv) High-power violet LDs, v) UV LEDs. The discussion will be focused on three main technological problems related to the microstructure of (AlGaIn)N layers in emitters based on III-N semiconductors: i) high density of dislocations in epitaxial layers of GaN on foreign substrates (sapphire, SiC, GaAs), ii), presence of strains, iii) atom segregation in ternary and quaternary compounds.

  10. Complexation of trivalent actinides and lanthanides with hydrophilic N-donor ligands for Am(III)/Cm(III) and An(III)/Ln(III) separation; Komplexierung von trivalenten Actiniden und Lanthaniden mit hydrophilen N-Donorliganden zur Am(III)/Cm(III)- bzw. An(III)/Ln(III)-Trennung

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, Christoph

    2017-07-24

    The implementation of actinide recycling processes is considered in several countries, aiming at the reduction of long-term radiotoxicity and heat load of used nuclear fuel. This requires the separation of the actinides from the fission and corrosion products. The separation of the trivalent actinides (An(III)) Am(III) and Cm(III), however, is complicated by the presence of the chemically similar fission lanthanides (Ln(III)). Hydrophilic N-donor ligands are employed as An(III) or Am(III) selective complexing agents in solvent extraction to strip An(III) or Am(III) from an organic phase loaded with An(III) and Ln(III). Though they exhibit excellent selectivity, the complexation chemistry of these ligands and the complexes formed during solvent extraction are not sufficiently characterized. In the present thesis the complexation of An(III) and Ln(III) with hydrophilic N-donor ligands is studied by time resolved laser fluorescence spectroscopy (TRLFS), UV/Vis, vibronic sideband spectroscopy and solvent extraction. TRLFS studies on the complexation of Cm(III) and Eu(III) with the Am(III) selective complexing agent SO{sub 3}-Ph-BTBP (tetrasodium 3,3{sup '},3'',3{sup '''}-([2,2{sup '}-bipyridine]-6,6{sup '}-diylbis(1,2,4-triazine-3,5,6-triyl)) tetrabenzenesulfonate) revealed the formation of [M(SO{sub 3}-Ph-BTBP){sub n}]{sup (4n-3)-} complexes (M = Cm(III), Eu(III); n = 1, 2). The conditional stability constants were determined in different media yielding two orders of magnitude larger β{sub 2}-values for the Cm(III) complexes, independently from the applied medium. A strong impact of ionic strength on the stability and stoichiometry of the formed complexes was identified, resulting from the stabilization of the pentaanionic [M(SO{sub 3}-Ph-BTBP){sub 2}]{sup 5-} complex with increasing ionic strength. Thermodynamic studies of Cm(III)-SO{sub 3}-Ph-BTBP complexation showed that the proton concentration of the applied medium impacts

  11. Emerging technologies and approaches to minimize discharges into Lake Michigan Phase 2, Module 3 report.

    Energy Technology Data Exchange (ETDEWEB)

    Negri, M. C.; Gillenwater, P.; Urgun Demirtas, M. (Energy Systems)

    2011-05-11

    Purdue University Calumet (Purdue) and Argonne National Laboratory (Argonne) have conducted an independent study to identify deployable technologies that could help the BP Whiting Refinery, and other petroleum refineries, meet future wastewater discharge limits. This study has been funded by BP. Each organization tested a subset of the target technologies and retains sole responsibility for its respective test design and implementation, quality assurance and control, test results obtained from each of the technologies, and corresponding conclusions and recommendations. This project was divided in two phases and modules. This report summarizes the work conducted by Argonne in Phase II Module 3 (Bench Scale Testing). Other Modules are discussed elsewhere (Emerging Technologies and Approaches to Minimize Discharges into Lake Michigan, Phase 2, Modules 1-3 Report, April 2011, prepared for BP Americas by the Argonne - Purdue Task Force). The goal of this project was to identify and assess available and emerging wastewater treatment technologies for removing mercury and vanadium from the Whiting Refinery wastewater and to conduct bench-scale tests to provide comparable, transparent, and uniform results across the broad range of technologies tested. After the bench-scale testing phase, a previously developed decision matrix was refined and applied by Argonne to process and review test data to estimate and compare the preliminary performance, engineering configuration, preliminary cost, energy usage, and waste generation of technologies that were shown to be able to remove Hg and/or V to below the target limit at the bench scale. The data were used as the basis to identify the best candidates for further testing at the bench or pilot scale on a slip stream of effluent to lake (ETL) or clarifier effluent (CE) at the Whiting Refinery to determine whether future limits could be met and to generate other pertinent data for scale-up and sustainability evaluation. As a result of

  12. Competitiveness in Emerging Markets

    DEFF Research Database (Denmark)

    This book presents a collection of interrelated research advances in the field of technological entrepreneurship from the perspective of competition in emerging markets. Featuring contributions by scholars from different fields of interest, it provides a mix of theoretical developments, insights...... and research methods used to uncover the unexplored aspects of competitiveness in emerging markets in an age characterized by disruptive technologies....

  13. Emerging Instructional Technologies: Exploring the Extent of Faculty Use of Web 2.0 Tools at a Midwestern Community College

    Science.gov (United States)

    Daher, Tareq; Lazarevic, Bojan

    2014-01-01

    The purpose of this research is to provide insight into the several aspects of instructional use of emerging web-based technologies. The study first explores the extent of Web 2.0 technology integration into face-to-face classroom activities. In this phase, the main focus of research interests was on the types and dynamics of Web 2.0 tools used by…

  14. Have Maryland local health departments effectively put in place the information technology relevant to emergency preparedness?

    Science.gov (United States)

    Nguh, Jonas

    2013-01-01

    Ever since the terrorist attacks of 9/11, the federal government has increased funding for emergency preparedness. However, the literature continues to document several areas of weaknesses in public health emergency management by local health departments (LHD). This lack of preparedness affects the entire public. The purpose of this study was to determine whether or not Maryland LHDs have effectively put in place the information technology (IT) that is relevant for emergency preparedness. Base Firm-wide IT Infrastructure Services and the Feeny/Willcocks Framework for Core IS Capabilities are the two conceptual frameworks used in this study. This qualitative study used the survey method and the data were analyzed through content analysis. The results revealed that utilization, practice, and performance of IT by Maryland LHDs are not efficient or effective. Recommendations included the development of "best practices," increased funding for IT infrastructure and the establishment of strategic management framework for IT initiatives. Implications for positive social change include the development of recommendations to enhance emergency preparedness practice, and advancement of knowledge so as to facilitate the functions, and duties of health departments in emergency preparedness operations.

  15. Synthesis, characterization and stability of Cr(III) and Fe(III) hydroxides

    Energy Technology Data Exchange (ETDEWEB)

    Papassiopi, N.; Vaxevanidou, K.; Christou, C.; Karagianni, E.; Antipas, G.S.E., E-mail: gantipas@metal.ntua.gr

    2014-01-15

    Highlights: • Fe(III)–Cr(III) hydroxides enhance groundwater quality better than pure Cr(III) compounds. • Crystalline Cr(OH){sub 3}·3H{sub 2}O was unstable, with a solubility higher than 50 μg/l. • Amorphous Cr(OH){sub 3}(am) was stable with a solubility lower than 50 μg/l in the range 5.7 < pH < 11. • For mixed Fe{sub 0.75}Cr{sub 0.25}(OH){sub 3}, the stability region was extended to 4.8 < pH < 13.5. -- Abstract: Chromium is a common contaminant of soils and aquifers and constitutes a major environmental problem. In nature, chromium usually exists in the form of two oxidation states, trivalent, Cr(III), which is relatively innocuous for biota and for the aquatic environment, and hexavalent, Cr(VI) which is toxic, carcinogenic and very soluble. Accordingly, the majority of wastewater and groundwater treatment technologies, include a stage where Cr(VI) is reduced to Cr(III), in order to remove chromium from the aqueous phase and bind the element in the form of environmentally stable solid compounds. In the absence of iron the final product is typically of the form Cr(OH){sub 3}·xH{sub 2}O whereas in the presence of iron the precipitate is a mixed Fe{sub (1−x)}Cr{sub x}(OH){sub 3} phase. In this study, we report on the synthesis, characterisation and stability of mixed (Fe{sub x},Cr{sub 1−x})(OH){sub 3} hydroxides as compared to the stability of Cr(OH){sub 3}. We established that the plain Cr(III) hydroxide, abiding to the approximate molecular formula Cr(OH){sub 3}·3H{sub 2}O, was crystalline, highly soluble, i.e. unstable, with a tendency to transform into the stable amorphous hydroxide Cr(OH){sub 3}(am) phase. Mixed Fe{sub 0.75}Cr{sub 0.25}(OH){sub 3} hydroxides were found to be of the ferrihydrite structure, Fe(OH){sub 3}, and we correlated their solubility to that of a solid solution formed by plain ferrihydrite and the amorphous Cr(III) hydroxide. Both our experimental results and thermodynamic calculations indicated that mixed Fe(III)–Cr(III

  16. Emerging technologies in arthroplasty: additive manufacturing.

    Science.gov (United States)

    Banerjee, Samik; Kulesha, Gene; Kester, Mark; Mont, Michael A

    2014-06-01

    Additive manufacturing is an industrial technology whereby three-dimensional visual computer models are fabricated into physical components by selectively curing, depositing, or consolidating various materials in consecutive layers. Although initially developed for production of simulated models, the technology has undergone vast improvements and is currently increasingly being used for the production of end-use components in various aerospace, automotive, and biomedical specialties. The ability of this technology to be used for the manufacture of solid-mesh-foam monolithic and coated components of complex geometries previously considered unmanufacturable has attracted the attention of implant manufacturers, bioengineers, and orthopedic surgeons. Currently, there is a paucity of reports describing this fabrication method in the orthopedic literature. Therefore, we aimed to briefly describe this technology, some of the applications in other orthopedic subspecialties, its present use in hip and knee arthroplasty, and concerns with the present form of the technology. As there are few reports of clinical trials presently available, the true benefits of this technology can only be realized when studies evaluating the clinical and radiographic outcomes of cementless implants manufactured with additive manufacturing report durable fixation, less stress shielding, and better implant survivorship. Nevertheless, the authors believe that this technology holds great promise and may potentially change the conventional methods of casting, machining, and tooling for implant manufacturing in the future. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  17. Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

    International Nuclear Information System (INIS)

    Ferenc, W.; Bernat, M; Gluchowska, H.W.; Sarzynski, J.

    2010-01-01

    The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilities were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10 -4 mol/dm 3 . (author)

  18. Emergency medical treatment and 'do not resuscitate' orders: When ...

    African Journals Online (AJOL)

    Whether there is a conflict between these two requirements is answered by considering: (i) the meaning of emergency medical treatment; (ii) the relationship between emergency medical treatment and DNR orders; (iii) the meaning of futile medical treatment; (iv) the relationship between DNR orders and euthanasia; and (v) ...

  19. Emerging nuclear suppliers

    International Nuclear Information System (INIS)

    Sands, A.

    1990-01-01

    Efforts to prevent the spread of nuclear weapons have usually taken two tracks: The traditional approach has concentrated on a potential proliferant's perceived need for nuclear technology and possibly weapons; a second approach has targeted the supply side of the proliferation equation. The issue being examined in this book---emerging nuclear suppliers---falls between these two approaches. The potential proliferants have emerged as possible unrestrained suppliers of nuclear materials and technology. They threaten the entire nonproliferation regime by their exporting, not their weapons development. Analyzing and understanding the issue of emerging suppliers requires a refined definition of suppliers in general. The simple dichotomy of traditional versus emerging suppliers is no longer an adequate framework for analysis. Suppliers differ significantly in their technical capabilities, experience, and regime involvement, and these distinctions result in different nuclear export policies

  20. Development of Public Training System for Emergency Exercise Using Virtual Reality Technology Based on Radioactive Release Accident

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Byung Il; Park, Seong Jun; Lee, Dewhey; Song, Sub Lee; Park, Younwon [BEES Inc., Daejeon (Korea, Republic of)

    2016-10-15

    An exercise is normally conducted for a day or two days depending on the scale of the exercise. What we have experienced up to date there are several limitations in the radiological emergency exercises such as low public acceptance, poor enthusiasm in the exercise participation, not very attracting exercise scenarios, low efficiency in conducting an exercise, and so on. In order to overcome the limitations of the present exercising system, we would like to develop a radiological emergency exercise system using VR (virtual reality) technology based on a radioactive release accident. In this paper, we just introduce some basic development methods and event tree based scenario as a beginning stage. After the accident in Fukushima Daiichi NPP, the importance of emergency exercise especially for the public is far more emphasized around the world more and more. However, the human labor focused radiological emergency exercise up to now has many limitations. After developing this system properly and by using it, we could even expect to estimate the weak points of the emergency arrangements and strategy we have.

  1. Development of Public Training System for Emergency Exercise Using Virtual Reality Technology Based on Radioactive Release Accident

    International Nuclear Information System (INIS)

    Lee, Byung Il; Park, Seong Jun; Lee, Dewhey; Song, Sub Lee; Park, Younwon

    2016-01-01

    An exercise is normally conducted for a day or two days depending on the scale of the exercise. What we have experienced up to date there are several limitations in the radiological emergency exercises such as low public acceptance, poor enthusiasm in the exercise participation, not very attracting exercise scenarios, low efficiency in conducting an exercise, and so on. In order to overcome the limitations of the present exercising system, we would like to develop a radiological emergency exercise system using VR (virtual reality) technology based on a radioactive release accident. In this paper, we just introduce some basic development methods and event tree based scenario as a beginning stage. After the accident in Fukushima Daiichi NPP, the importance of emergency exercise especially for the public is far more emphasized around the world more and more. However, the human labor focused radiological emergency exercise up to now has many limitations. After developing this system properly and by using it, we could even expect to estimate the weak points of the emergency arrangements and strategy we have

  2. New technologies and emerging threats: personnel security adjudicative guidelines in the age of social networking

    OpenAIRE

    Festa, James P.

    2012-01-01

    Approved for public release; distribution is unlimited Publicized incidents involving espionage or violence by government employees with security clearances have raised concern for the personnel security community. The guidelines used to adjudicate security clearances were last updated in 2005; since that time, significant technological developments, especially in social media and communications, have emerged. This thesis developed a comprehensive list of current Internet behaviors, and us...

  3. Advanced Supermarket Refrigeration/Heat Recovery Systems. Country Report, Denmark

    DEFF Research Database (Denmark)

    Knudsen, Hans-Jørgen Høgaard; Christensen, K. G.

    Annex 26 is the first international project under the IEA Heat Pump Programme that links refrigeration and heat pump technology. Recovering heat from advanced supermarket refrigeration systems for space and water heating seems obvious and is beneficial for owners and operators. Because the great...... number of supermarkets that offer frozen and chilled food and further growth of this sector may be expected, the amount of energy used for refrigeration is enormous and will likely increase in the near future. Annex 26 analysed several advanced supermarket refrigeration systems and came to remarkable...... conclusions as far energy conservation and TEWI reduction is concerned. The conclusion justify that advanced supermarket systems with heat recovery should receive great attention and support. And there is still further research needed in several areas. The Annex also included a thorough system analyses...

  4. Emerging biorefinery technologies for Indian forest industry to reduce GHG emissions.

    Science.gov (United States)

    Sharma, Naman; Nainwal, Shubham; Jain, Shivani; Jain, Siddharth

    2015-11-01

    The production of biofuels as alternative energy source over fossil fuels has gained immense interest over the years as it can contribute significantly to reduce the greenhouse gas (GHG) emissions from energy production and utilization. Also with rapidly increasing fuel price and fall in oil wells, the present scenario forces us to look for an alternative source of energy that will help us in the operation of industrial as well as the transportation sector. The pulp mills in India are one of the many options. The pulp mills in India can help us to produce bio-fuels by thermo-chemical/biochemical conversion of black liquor and wood residues. These technologies include extraction of hemi-cellulose from wooden chips and black liquor, lignin from black liquor, methanol from evaporator condensates, biogas production from waste sludge, syngas production from biomass using gasification and bio-oil production from biomass using pyrolysis. The objective of this paper is to overview these emerging bio-refinery technologies that can be implemented in Indian Forest Industry to get bio-fuels, bio-chemicals and bio-energy to reduce GHG emissions. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Enabling frameworks for low-carbon technology transfer to small emerging economies: Analysis of ten case studies in Chile

    International Nuclear Information System (INIS)

    Pueyo, Ana

    2013-01-01

    Technology transfer is crucial to reduce the carbon intensity of developing countries. Enabling frameworks need to be in place to allow foreign technologies to flow, to be absorbed and to bring about technological change in the recipient country. This paper contributes to identifying these enabling factors by analysing 10 case studies of low-carbon technology transfer processes based in Chile. Our findings show the importance of strong economic and institutional fundamentals, a sound knowledge base, a sizable and stable demand and a functioning local industry. Policy recommendations are derived to improve the penetration of foreign low-carbon technologies in developing countries, focusing on the particularities of small and medium emerging economies. - Highlights: ► We analyse 10 case studies of low carbon technology transfer to Chile. ► We identify enablers of technology transfer to developing countries. ► We provide policy recommendations focusing on small and medium economies.

  6. Editorial Commentary: Changing Times in Sports Biomechanics: Baseball Pitching Injuries and Emerging Wearable Technology.

    Science.gov (United States)

    Fleisig, Glenn S

    2018-03-01

    Research has shown relations between amount of baseball pitching and overuse injuries, as well as between poor mechanics and high loads on the elbow and shoulder. However, overuse injuries continue to be a problem from youth to professional sports. Emerging wearable technology may enable players, parents, coaches, leagues, and clinicians to monitor biomechanics during competition and training, reducing the risk of serious injury. Copyright © 2017 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  7. Cutting the Army’s Umbilical Cord: A Study of Emerging Fuel Technologies and Their Impact on National Security

    Science.gov (United States)

    2011-12-01

    Ireland, and Puerto Rico , the dependence presents a national security concern for the United States. In order to decrease the DOD’s dependence, Congress...fuel technologies evaluated are microgrids , solar and wind power generators, and hybrid-electric tactical wheeled vehicles. The method used in the case...claims, this monograph analyzes three case studies. The three emerging fuel technologies evaluated are microgrids , solar and wind power generators

  8. Antagonizing STAT3 dimerization with a rhodium(III) complex.

    Science.gov (United States)

    Ma, Dik-Lung; Liu, Li-Juan; Leung, Ka-Ho; Chen, Yen-Ting; Zhong, Hai-Jing; Chan, Daniel Shiu-Hin; Wang, Hui-Min David; Leung, Chung-Hang

    2014-08-25

    Kinetically inert metal complexes have arisen as promising alternatives to existing platinum and ruthenium chemotherapeutics. Reported herein, to our knowledge, is the first example of a substitutionally inert, Group 9 organometallic compound as a direct inhibitor of signal transducer and activator of transcription 3 (STAT3) dimerization. From a series of cyclometalated rhodium(III) and iridium(III) complexes, a rhodium(III) complex emerged as a potent inhibitor of STAT3 that targeted the SH2 domain and inhibited STAT3 phosphorylation and dimerization. Significantly, the complex exhibited potent anti-tumor activities in an in vivo mouse xenograft model of melanoma. This study demonstrates that rhodium complexes may be developed as effective STAT3 inhibitors with potent anti-tumor activity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Industrial emerging chemicals in the environment

    Directory of Open Access Journals (Sweden)

    Vojinović-Miloradov Mirjana B.

    2014-01-01

    Full Text Available In the recent time, considerable interest has grown concerning the presence of the emerging industrial chemicals, EmIC. They are contaminants that have possible pathway to enter to the environment and they are dominantly released by industrial and anthropogenic activities. EmIC are applied in different fields using as industrial chemicals (new and recently recognized, global organic contaminants (flame retardant chemicals, pharmaceuticals (for both human and animal uses, endocrine-modulating compounds, biological metabolites, personal care products, household chemicals, nanomaterial (energy storage products, lubricants, anticorrosive and agriculture chemicals and others that are applied to a wide variety of everyday items such as clothing, upholstery, electronics and automobile interiors. NORMAN (Network of reference laboratories for monitoring of emerging environmental pollutants has established an open, dynamic, list of emerging substances and pollutants. EmIC have been recently detected in the environment due to their long-term presence, pseudo-persistence and increased use. Improvements in sophisticated analytical methods and time integrative passive sampling have enabled the identification and quantification of EmIC, in very low concentrations (ppb, ppt and lower, which likely have been present in all environmental mediums for decades. Passive technology is an innovative technique for the time-integrated measurement of emerging contaminants in water, sediment, soil and air. Passive samplers are simple handling cost-effective tool that could be used in environmental monitoring programmes. These devices are now being considered as a part of an emerging strategy for monitoring a range of emerging industrial chemicals and priority pollutants in the aquatic environment. EmIC are substances that are not included in the routine monitoring programmes and whose fate, behaviour and (ecotoxicological effects are still not well understood. Emerging

  10. Ethical perspectives on emerging assistive technologies: insights from focus groups with stakeholders in long-term care facilities.

    Science.gov (United States)

    Dorsten, Aimee-Marie; Sifford, K Susan; Bharucha, Ashok; Mecca, Laurel Person; Wactlar, Howard

    2009-03-01

    ASSISTIVE TECHNOLOGIES ARE RELATIVELY novel tools for research and daily care in long-term care (LTC) facilities that are faced with the burgeoning of the older adult population and dwindling staffing resources. The degree to which stakeholders in LTC facilities are receptive to the use of these technologies is poorly understood. Eighteen semi-structured focus groups and one interview were conducted with relevant groups of stakeholders at seven LTC facilities in southwestern Pennsylvania. Common themes identified across all focus groups centered on concerns for privacy, autonomy, cost, and safety associated with implementation of novel technologies. The relative importance of each theme varied by stakeholder group as well as the perceived severity of cognitive and/or physical disability. Our findings suggest that ethical issues are critical to acceptance of novel technologies by their end users, and that stakeholder groups are interdependent and require shared communication about the acceptance of these emerging technologies.

  11. III-nitrides, 2D transition metal dichalcogenides, and their heterojunctions

    KAUST Repository

    Mishra, Pawan

    2017-04-01

    Group III-nitride materials have attracted great attention for applications in high efficiency electronic and optoelectronics devices such as high electron mobility transistors, light emitting diodes, and laser diodes. On the other hand, group VI transition metal dichalcogenides (TMDs) in the form of MX2 has recently emerged as a novel atomic layered material system with excellent thermoelectric, electronic and optoelectronic properties. Also, the recent investigations reveal that the dissimilar heterojunctions formed by TMDs and III-nitrides provide the route for novel devices in the area of optoelectronic, electronics, and water splitting applications. In addition, integration of III-nitrides and TMDs will enable high density integrated optoelectronic circuits and the development of hybrid integration technologies. In this work, we have demonstrated kinetically controlled growth processes in plasma assisted molecular beam epitaxy (PAMBE) for the III-nitrides and their engineered heterostructures. Techniques such as Ga irradiation and nitrogen plasma exposure has been utilized to implement bulk GaN, InGaN and their heterostructures in PAMBE. For the growth of III-nitride based heterostructures, the in-situ surface stoichiometry monitoring (i-SSM) technique was developed and used for implementing stepped and compositionally graded InGaN-based multiple quantum wells (MQWs). Their optical and microstrain analysis in conjunction with theoretical studies confirmed improvement in the radiative recombination rate of the graded-MQWs as compared to that of stepped-MQWs, owing to the reduced strain in graded-MQWs. Our achievement also includes the realization of the p-type MoS2 by engineering pristine MoS2 layers in PAMBE. Mainly, Ga and nitrogen plasma irradiation on the pristine MoS2 in PAMBE has resulted in the realization of the p-type MoS2. Also, GaN epitaxial thin layers were deposited on MoS2/c-sapphire, WSe2/c-sapphire substrates by PAMBE to study the band

  12. EMERGENCE OF "DRIVERS" FOR THE IMPLEMENTATION OF HEALTH TECHNOLOGY ASSESSMENT.

    Science.gov (United States)

    Castro Jaramillo, Hector Eduardo; Moreno-Mattar, Ornella; Osorio-Cuevas, Diana

    2016-01-01

    Health technology assessment (HTA) examines the consequences of the application of health technologies and is aimed at better informing decision-makers. Over the past 30 years, different countries have implemented HTA organizations. Colombia established by law its own HTA agency (IETS) in 2011 which started operations in November 2012. The aim of this study was to assess the feasibility of conducting and using HTA to inform decision-making in this context. Through a qualitative approach, ten "drivers" emerged with the ability to help or hinder HTA development in this context: availability and quality of data, implementation strategy, cultural aspects, local capacity, financial support, policy/political support, globalization, stakeholder pressure, health system context, and usefulness perception. Semi-structured interviews were conducted with key HTA researchers, after following rigorous transcription, and thematic content analysis, those aspects that may be barriers or facilitator for HTA development and use in Colombia were identified. Although HTA has become a tool to inform decision-making around the world, its use may vary according to setting. Determining those aspects which may enable or interfere with HTA development and use in Colombia may be useful for other countries when considering the establishment of HTA systems. The conceptual transferability of concepts like "drivers" with caveats may be of interest for similar settings trying to incorporate HTA processes and institutions into systematic decision-making.

  13. Rethinking risk assessment for emerging technology first-in-human trials.

    Science.gov (United States)

    Genske, Anna; Engel-Glatter, Sabrina

    2016-03-01

    Recent progress in synthetic biology (SynBio) has enabled the development of novel therapeutic opportunities for the treatment of human disease. In the near future, first-in-human trials (FIH) will be indicated. FIH trials mark a key milestone in the translation of medical SynBio applications into clinical practice. Fostered by uncertainty of possible adverse events for trial participants, a variety of ethical concerns emerge with regards to SynBio FIH trials, including 'risk' minimization. These concerns are associated with any FIH trial, however, due to the novelty of the approach, they become more pronounced for medical applications of emerging technologies (emTech) like SynBio. To minimize potential harm for trial participants, scholars, guidelines, regulations and policy makers alike suggest using 'risk assessment' as evaluation tool for such trials. Conversely, in the context of emTech FIH trials, we believe it to be at least questionable to contextualize uncertainty of potential adverse events as 'risk' and apply traditional risk assessment methods. Hence, this issue needs to be discussed to enable alterations of the evaluation process before the translational phase of SynBio applications begins. In this paper, we will take the opportunity to start the debate and highlight how a misunderstanding of the concept of risk, and the possibilities and limitations of risk assessment, respectively, might impair decision-making by the relevant regulatory authorities and research ethics committees, and discuss possible solutions to tackle the issue.

  14. Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-[(1H-benzimidazol-2-yl-methylene) amino] phenol

    International Nuclear Information System (INIS)

    Omprakash, K.L.; Chandra Pal, A.V.; Reddy, M.L.N.

    1982-01-01

    A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO 4 ) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (logβ 2 ) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III). (author)

  15. Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-((1H-benzimidazol-2-yl-methylene) amino) phenol

    Energy Technology Data Exchange (ETDEWEB)

    Omprakash, K L; Chandra Pal, A V; Reddy, M L.N. [Osmania Univ., Hyderabad (India). Dept. of Chemistry

    1982-03-01

    A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO/sub 4/) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (log..beta../sub 2/) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III).

  16. Environmental pollution from working fluids of ORC processes; Umweltbelastung durch Arbeitsstoffe fuer organische Rankine-Prozesse

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, K.

    2006-07-01

    The contribution quantifies the negative environmental effects of the potential loss of working fluids and/or refrigerants and the positive environmental effect of power generation without working fluids. The TEWI (Total Equivalent Warming Impact)concept which is common in refrigeration and air conditioning was modified for ORc systems and was used for assessing the environmental effects of potential working fluids. (orig.)

  17. Review of Virtual Reality Technology Application in Fire and Medical Exercise for Development of VR based Radiological Emergency Exercise System

    International Nuclear Information System (INIS)

    Song, Sub Lee; Lee, Byung Il; Park, Seong Jun; Lee, Dewhey; Park, Younwon

    2016-01-01

    The article of Act on Physical Protection and Radiological Emergency (APPRE) was amended as a nuclear licensee shall formulate a radiological emergency exercise plan as prescribed by the Ordinance of the Prime minister and execute such plan with the approval of the Nuclear Safety and Security Commission (NSSC). Current radiological emergency exercise is basically conducting in the field. The field exercise essentially requires participation of mass population. Due to lack of time, cost, communication and participation, the field exercise necessarily causes several limitations in an aspect of effectiveness. The public participants often misunderstood the situation as real though it is just an exercise so several conflicts are occurring. Furthermore, the exercise program is too ideal to reflect the real accident situation. In this point of view, application of virtual reality (VR) technology is highlighted with its many advantages. VR technology is expected to resolve those existing problems. Our research team is currently developing VR based radiological emergency exercise system. In this paper, the advantages and actual application of VR based training were introduced. With those advantages and improvement of existing disadvantages, our VR based radiological emergency exercise system will be developed. Not only physical interactive features, but also interactive fail-considered real-like scenarios will be adopted in the system. The ultimate goal of the system is safe and perfect evacuation of residents in case of radioactive accident

  18. Review of Virtual Reality Technology Application in Fire and Medical Exercise for Development of VR based Radiological Emergency Exercise System

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sub Lee; Lee, Byung Il; Park, Seong Jun; Lee, Dewhey; Park, Younwon [BEES Inc., Daejeon (Korea, Republic of)

    2016-10-15

    The article of Act on Physical Protection and Radiological Emergency (APPRE) was amended as a nuclear licensee shall formulate a radiological emergency exercise plan as prescribed by the Ordinance of the Prime minister and execute such plan with the approval of the Nuclear Safety and Security Commission (NSSC). Current radiological emergency exercise is basically conducting in the field. The field exercise essentially requires participation of mass population. Due to lack of time, cost, communication and participation, the field exercise necessarily causes several limitations in an aspect of effectiveness. The public participants often misunderstood the situation as real though it is just an exercise so several conflicts are occurring. Furthermore, the exercise program is too ideal to reflect the real accident situation. In this point of view, application of virtual reality (VR) technology is highlighted with its many advantages. VR technology is expected to resolve those existing problems. Our research team is currently developing VR based radiological emergency exercise system. In this paper, the advantages and actual application of VR based training were introduced. With those advantages and improvement of existing disadvantages, our VR based radiological emergency exercise system will be developed. Not only physical interactive features, but also interactive fail-considered real-like scenarios will be adopted in the system. The ultimate goal of the system is safe and perfect evacuation of residents in case of radioactive accident.

  19. Phosphorescent systems based on iridium(III) complexes

    NARCIS (Netherlands)

    Ulbricht, C.

    2009-01-01

    Phosphorescent iridium(III)-based complexes are experiencing a growing interest in a number of research fields. Aside from lighting and display technologies (i.e. OLEDs and LECs), they find use in various applications such as biolabeling, sensors, solar cells and water splitting. In particular, the

  20. Spectrophotometric and pH-Metric Studies of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III Metal Complexes with Rifampicin

    Directory of Open Access Journals (Sweden)

    A. N. Sonar

    2011-01-01

    Full Text Available The metal-ligand and proton-ligand stability constant of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III metals with substituted heterocyclic drug (Rifampicin were determined at various ionic strength by pH metric titration. NaClO4 was used to maintain ionic strength of solution. The results obtained were extrapolated to the zero ionic strength using an equation with one individual parameter. The thermodynamic stability constant of the complexes were also calculated. The formation of complexes has been studied by Job’s method. The results obtained were of stability constants by pH metric method is confirmed by Job’s method.

  1. Adequate technologies for wireless real-time dose rate monitoring for off-site emergency management

    International Nuclear Information System (INIS)

    Dielmann, R.; Buerkin, W.

    2003-01-01

    Full text: What are the requirements for off-site gamma dose rate monitoring systems? What are the pros and cons of available communication technologies? This report gives an overview of modern communication techniques and their applicability for reliable real-time data acquisition as basis for off-site nuclear emergency management. The results of three years operating experience with a wireless gamma dose rate monitoring system, installed around the NPPs of KURSK, KALININ and BALAKOVA (Russia) in the year 2000, are shown. (author)

  2. An emergency response centre (ERC) for the preparedness and response to nuclear and radiological emergencies

    International Nuclear Information System (INIS)

    Pradeepkumar, K.S.; Sharma, D.N.; Abani, M.C.

    2001-01-01

    This paper discusses the requirement for a state of the art Emergency Response Centre (ERC) to be developed and kept in readiness for the quick response to any nuclear or radiological emergencies. For an effective response to any major nuclear emergency an ERC having the facilities of i) environmental dose rate monitoring network established using both mobile and fixed units ii) on-line meteorological data collection and information station iii) on-line computation and prediction of isodose curves in real time and iv) properly developed and tested monitoring methodologies are essential. Vehicles with on-line data transfer facility to the ERC and equipped with different type of monitoring systems can function as Mobile Monitoring Laboratories (MMLs) and can help in quick decision making even during a radiological emergency far away from the ERC. (author)

  3. Complexes of lanthanum(III), cerium(III), samarium(III) and dysprosium(III) with substituted piperidines

    Energy Technology Data Exchange (ETDEWEB)

    Manhas, B S; Trikha, A K; Singh, H; Chander, M

    1983-11-01

    Complexes of the general formulae M/sub 2/Cl/sub 6/(L)/sub 3/.C/sub 2/H/sub 5/OH and M/sub 2/(NO/sub 3/)/sub 6/(L)/sub 2/.CH/sub 3/OH have been synthesised by the reactions of chlorides and nitrates of La(III), Ce(III), Sm(III) and Dy(III) with 2-methylpiperidine, 3-methylpiperidine and 4-methylpiperidine. These complexes have been characterised on the basis of their elemental analysis, and IR and electronic reflectance spectra. IR spectral data indicate the presence of coordinated ethanol and methanol molecules and bidentate nitrate groups. Coordination numbers of the metal ions vary from 5 to 8. 19 refs.

  4. Emerging Technologies: Small Satellite and Associated TPED

    Science.gov (United States)

    Zitz, R.

    2014-09-01

    The 2010 National Space Policy directs the U.S. space community, comprised of the Department of Defense, Intelligence Community, Military Services and NASA to examine our nation's ability to conduct space-based ISR and communications even during a period of peer state and near peer state attacks intended to deny us our advantages we accrue from our use of space systems. DOD and the ICs past experience is largely one of building small numbers of extraordinarily capable and expensive (exquisite) satellites for communications and ISR. As potential adversaries continue to develop cyber-attack capabilities and have demonstrated an ability to kinetically attack spacecraft, the vulnerability of our architecture is now a serious concern. In addition, the sluggish U.S. economy, the draw down and pull back from a decade of combat operations, and other factors have combined to force a significant reduction in DOD and IC spending over the coming decade(s). Simultaneously, DOD and the IC have a growing awareness that the long lead times and long mission duration of the exquisite space assets can lead to fielding technologies that become obsolete and mission limiting. Some DOD and IC leaders are now examining alternative architectures to provide lower cost, flexible, more diverse and rapidly launchable space systems. Government leaders are considering commercially hosted payloads in geosynchronous orbits and smaller, lower cost, free flying government and commercial satellites in low earth orbits. Additional changes to the ground tasking, processing, exploitation and dissemination (TPED) systems would ensure small satellites have end-to-end mission capability and meet emerging needs such as ease of tasking, multi-INT processing, and more advanced distribution mechanisms (e.g., to users on the move). Today, a majority of agency leaders and their subordinate program managers remain convinced that only large, expensive systems can truly answer requirements and provide reliable

  5. Cell Surface and Membrane Engineering: Emerging Technologies and Applications

    Directory of Open Access Journals (Sweden)

    Christopher T. Saeui

    2015-06-01

    Full Text Available Membranes constitute the interface between the basic unit of life—a single cell—and the outside environment and thus in many ways comprise the ultimate “functional biomaterial”. To perform the many and often conflicting functions required in this role, for example to partition intracellular contents from the outside environment while maintaining rapid intake of nutrients and efflux of waste products, biological membranes have evolved tremendous complexity and versatility. This article describes how membranes, mainly in the context of living cells, are increasingly being manipulated for practical purposes with drug discovery, biofuels, and biosensors providing specific, illustrative examples. Attention is also given to biology-inspired, but completely synthetic, membrane-based technologies that are being enabled by emerging methods such as bio-3D printers. The diverse set of applications covered in this article are intended to illustrate how these versatile technologies—as they rapidly mature—hold tremendous promise to benefit human health in numerous ways ranging from the development of new medicines to sensitive and cost-effective environmental monitoring for pathogens and pollutants to replacing hydrocarbon-based fossil fuels.

  6. Information communication technology and electricity consumption in emerging economies

    International Nuclear Information System (INIS)

    Sadorsky, Perry

    2012-01-01

    This study examines the impact of information communication technology (ICT) on electricity consumption in emerging economies. The empirical results, obtained from dynamic panel demand models, show a positive and statistically significant relationship between ICT and electricity consumption when ICT is measured using internet connections, mobile phones or the number of PCs. Long-run ICT elasticities are smaller than income elasticities but because ICT growth rates are so much higher than income growth rates, the impact of ICT on electricity demand is greater than the impact of income on electricity demand. One implication of these results is that policies designed to close the “digital divide” between developed and developing economics by increasing the adoption of ICT in developing countries are put at odds with energy policies to reduce GHG emissions. - Highlights: ► ICT usage is growing rapidly in developing countries. ► ICT usage affects electricity consumption. ► Three different measures of ICT are examined. ► Short-run and long-run ICT elasticities are calculated. ► Implications for energy policy are discussed.

  7. Cell Surface and Membrane Engineering: Emerging Technologies and Applications

    Science.gov (United States)

    Saeui, Christopher T.; Mathew, Mohit P.; Liu, Lingshui; Urias, Esteban; Yarema, Kevin J.

    2015-01-01

    Membranes constitute the interface between the basic unit of life—a single cell—and the outside environment and thus in many ways comprise the ultimate “functional biomaterial”. To perform the many and often conflicting functions required in this role, for example to partition intracellular contents from the outside environment while maintaining rapid intake of nutrients and efflux of waste products, biological membranes have evolved tremendous complexity and versatility. This article describes how membranes, mainly in the context of living cells, are increasingly being manipulated for practical purposes with drug discovery, biofuels, and biosensors providing specific, illustrative examples. Attention is also given to biology-inspired, but completely synthetic, membrane-based technologies that are being enabled by emerging methods such as bio-3D printers. The diverse set of applications covered in this article are intended to illustrate how these versatile technologies—as they rapidly mature—hold tremendous promise to benefit human health in numerous ways ranging from the development of new medicines to sensitive and cost-effective environmental monitoring for pathogens and pollutants to replacing hydrocarbon-based fossil fuels. PMID:26096148

  8. Public Policy and Protection from Exclusion - Phase III | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Public Policy and Protection from Exclusion - Phase III ... and decision-makers active in the promotion of equitable health policies, with a view to promoting the emergence of an observatory of health systems in the ... Policy in Focus publishes a special issue profiling evidence to empower women in the labour market.

  9. Development of incident progress prediction technologies for nuclear emergency preparedness. Current status and future subjects

    International Nuclear Information System (INIS)

    Yoshida, Yoshitaka; Yamamoto, Yasunori; Kusunoki, Takayoshi; Kawasaki, Ikuo; Yanagi, Chihiro; Kinoshita, Ikuo; Iwasaki, Yoshito

    2014-01-01

    Nuclear licensees are required to maintain a prediction system during normal condition for using a nuclear emergency by the Basic Plan for Disaster Prevention of government. With prediction of the incident progress, if the present condition of nuclear power plant is understood appropriately and it grows more serious with keeping the present situation, it is in predicting what kind of situation will be occurred in the near future, choosing the effective countermeasures against the coming threat, and understanding the time available of intervention time. Following the accident on September 30 1999 in the nuclear fuel fabrication facility in Tokai Village of Ibaraki Prefecture, the Institute of Nuclear Safety System started development of incident progress prediction technologies for nuclear emergency preparedness. We have performed technical applications and made improvements in nuclear emergency exercises and verified the developed systems using the observed values of the Fukushima Daiichi Nuclear Power Plant accident. As a result, our developed Incident Progress Prediction System was applied to nuclear emergency exercises and we accumulated knowledge and experience by which we improved the system to make predictions more rapidly and more precisely, including for example, the development of a prediction method for leak size of reactor coolant. On the other hand, if a rapidly progressing incident occurs, since end users need simple and quick predictions about the public's protection and evacuation areas, we developed the Radioactive Materials Release, Radiation Dose and Radiological Protection Area Prediction System which changed solving an inverse problem into a forward problem solution. In view of the water-level-decline incident of the spent fuel storage facility at the Fukushima Daiichi Nuclear Power Plant, the spent fuel storage facility water level and the water temperature evaluation tool were improved. Such incident progress prediction technologies were

  10. Emerging Trends on the Topic of Information Technology in the Field of Educational Sciences: A Bibliometric Exploration

    Science.gov (United States)

    González-Valiente, Carlos Luis

    2015-01-01

    The paper presents a bibliometric analysis on the topic of Information Technology (IT) in the field of Educational Sciences, aimed at envisioning the research emerging trends. The ERIC database is used as a consultation source; the results were subjected to productivity by authors, journals, and term co-occurrence analysis indicators for the…

  11. Inner-sphere and outer-sphere complexes of yttrium(III), lanthanum (III), neodymium(III), terbium(III) and thulium(III) with halide ions in N,N-dimethylformamide

    International Nuclear Information System (INIS)

    Takahashi, Ryouta; Ishiguro, Shin-ichi

    1991-01-01

    The formation of chloro, bromo and iodo complexes of yttrium(III), and bromo and iodo complexes of lanthanum(III), neodymium(III), terbium(III) and thulium(III) has been studied by precise titration calorimetry in N,N-dimethylformamide (DMF) at 25 o C. The formation of [YCl] 2+ , [YCl 2 ] + , [YCl 3 ] and [YCl 4 ] - , and [MBr] 2+ and [MBr 2 ] + (M = Y, La, Nd, Tb, Tm) was revealed, and their formation constants, enthalpies and entropies were determined. It is found that the formation enthalpies change in the sequence ΔH o (Cl) > ΔH o (l), which is unusual for hard metal (III) ions. This implies that, unlike the chloride ion, the bromide ion forms outer-sphere complexes with the lanthanide(III) and yttrium(III) ions in DMF. Evidence for either an inner- or outer-sphere complex was obtained from 89 Y NMR spectra for Y(ClO 4 ) 3 , YCl 3 and YBr 3 DMF solutions at room temperature. (author)

  12. An eMERGE Clinical Center at Partners Personalized Medicine

    Directory of Open Access Journals (Sweden)

    Jordan W. Smoller

    2016-01-01

    Full Text Available The integration of electronic medical records (EMRs and genomic research has become a major component of efforts to advance personalized and precision medicine. The Electronic Medical Records and Genomics (eMERGE network, initiated in 2007, is an NIH-funded consortium devoted to genomic discovery and implementation research by leveraging biorepositories linked to EMRs. In its most recent phase, eMERGE III, the network is focused on facilitating implementation of genomic medicine by detecting and disclosing rare pathogenic variants in clinically relevant genes. Partners Personalized Medicine (PPM is a center dedicated to translating personalized medicine into clinical practice within Partners HealthCare. One component of the PPM is the Partners Healthcare Biobank, a biorepository comprising broadly consented DNA samples linked to the Partners longitudinal EMR. In 2015, PPM joined the eMERGE Phase III network. Here we describe the elements of the eMERGE clinical center at PPM, including plans for genomic discovery using EMR phenotypes, evaluation of rare variant penetrance and pleiotropy, and a novel randomized trial of the impact of returning genetic results to patients and clinicians.

  13. An emergency response plan for transportation

    International Nuclear Information System (INIS)

    Fontaine, M.V.; Guerel, E.

    2000-01-01

    Transnucleaire is involved in road and rail transport of nuclear fuel cycle materials. To comply with IAEA recommendations, Transnucleaire has to master methods of emergency response in the event of a transport accident. Considering the utmost severe situations, Transnucleaire has studied several cases and focused especially on an accident involving a heavy cask. In France, the sub-prefect of each department is in charge of the organisation of the emergency teams. The sub-prefect may request Transnucleaire to supply experts, organisation, equipment and technical support. The Transnucleaire Emergency Response Plan covers all possible scenarios of land transport accidents and relies on: (i) an organisation ready for emergency situations, (ii) equipment dedicated to intervention, and (iii) training of its own experts and specialised companies. (author)

  14. Telehealth-Enabled Emergency Medical Services Program Reduces Ambulance Transport to Urban Emergency Departments

    OpenAIRE

    Langabeer, James R.; Gonzalez, Michael; Alqusairi, Diaa; Champagne-Langabeer, Tiffany; Jackson, Adria; Mikhail, Jennifer; Persse, David

    2016-01-01

    Introduction Emergency medical services (EMS) agencies transport a significant majority of patients with low acuity and non-emergent conditions to local emergency departments (ED), affecting the entire emergency care system’s capacity and performance. Opportunities exist for alternative models that integrate technology, telehealth, and more appropriately aligned patient navigation. While a limited number of programs have evolved recently, no empirical evidence exists for their efficacy. T...

  15. Emerging Energy-Efficient Technologies in Buildings Technology Characterizations for Energy Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, SW

    2004-10-11

    The energy use in America's commercial and residential building sectors is large and growing. Over 38 quadrillion Btus (Quads) of primary energy were consumed in 2002, representing 39% of total U.S. energy consumption. While the energy use in buildings is expected to grow to 52 Quads by 2025, a large number of energy-related technologies exist that could curtail this increase. In recent years, improvements in such items as high efficiency refrigerators, compact fluorescent lights, high-SEER air conditioners, and improved building shells have all contributed to reducing energy use. Hundreds of other technology improvements have and will continue to improve the energy use in buildings. While many technologies are well understood and are gradually penetrating the market, more advanced technologies will be introduced in the future. The pace and extent of these advances can be improved through state and federal R&D. This report focuses on the long-term potential for energy-efficiency improvement in buildings. Five promising technologies have been selected for description to give an idea of the wide range of possibilities. They address the major areas of energy use in buildings: space conditioning (33% of building use), water heating (9%), and lighting (16%). Besides describing energy-using technologies (solid-state lighting and geothermal heat pumps), the report also discusses energy-saving building shell improvements (smart roofs) and the integration of multiple energy service technologies (CHP packaged systems and triple function heat pumps) to create synergistic savings. Finally, information technologies that can improve the efficiency of building operations are discussed. The report demonstrates that the United States is not running out of technologies to improve energy efficiency and economic and environmental performance, and will not run out in the future. The five technology areas alone can potentially result in total primary energy savings of between 2 and

  16. Aspirations of Responsibility and Emerging Technologies

    NARCIS (Netherlands)

    Bowman, D.M.; Dijkstra, A.; Fautz, C.; Guivant, J.S.; Konrad, Kornelia Elke; van Lente, H; van Lente, H.; Woll, S.; Bowman, D.; Dijkstra, A.; Fautz, C.; Guivant, J.; Konrad, K.; van Lente, H; Woll, S.

    2016-01-01

    We live in an increasingly complex and interconnected world. Where technology, and its potential benefits and risks, are not bound by, and do not respect, jurisdictional borders. A world that sees technological innovation as being an integral component of the Anthropocene, and resilience as being

  17. Emerging Solar Technologies: Perovskite Solar Cell

    Indian Academy of Sciences (India)

    energy technologies and ... cost-effective and feasible non-silicon solar cell technologies. ..... storing in the air for long periods, and the stability reached up to .... [12] Y Liu, L A Renna, M Bag, Z A Page, P Kim, J Choi, T Emrick, D Venkatara-.

  18. Classification,Hazards and Countermeasures of Agricultural Environmental Pollution Emergencies

    Institute of Scientific and Technical Information of China (English)

    Xiaoming; CHUAI; Haixia; ZHOU; Jianping; ZHAO; Shubo; CHENG; Jiang; YU

    2013-01-01

    Agricultural environmental pollution emergencies have become a hot research topic because of the high incidence and influence depth.This paper introduces classification and features of agricultural environmental pollution emergencies:by pollutant type,it falls into organic pollution emergencies and inorganic pollution emergencies;by the approach of entering agricultural environment,it falls into water resource agricultural environmental pollution emergencies and non-water resource agricultural environmental pollution emergencies.Hazards of agricultural environmental pollution emergencies are analyzed from 4 perspectives:personal security,indirect loss,ecological environment and social stability.In view of the hazards,countermeasures are given to deal with the pollution emergencies as(i)establishing a risk evaluation mechanism for agricultural environment;(ii)enhancing the capacity of handling agricultural environmental pollution emergencies;(iii)introducing new management concepts for environmental emergencies,and cultivating keen emergency management consciousness.

  19. Refrigeration and global warming

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    Some aspects of global warming in general, and the implications for refrigerants and refrigerator efficiency in particular, are briefly considered in a question and answer format. The concepts of Global Warming Potential (GWP) and Total Equivalent Warming Impact (TEWI) are explained. GWP is an index which allows a simple comparison to be make between the warming effects of different gases on a kg to kg basis relative to carbon. The GWP depends both on the lifetime of a substance in the atmosphere and its infra-red absorption capacity. The overall warming effect of operating a refrigeration system for its entire life is measured by its TEWI. Chloroflourocarbons (CFCs) which have been widely used as refrigerants are powerful greenhouse gases with high GWPs. Because of the bank of CFCs in refrigerating systems, their levels in the atmosphere are still increasing and it will be some time before refrigerant changes will be effective in reducing the warming effects of refrigerant releases. Hydrocarbons, hydroflourocarbons and ammonia all have a part to play as substitute refrigerants. Refrigerator efficiency is very important in terms of reducing CO 2 emissions. (UK)

  20. Potential application of solar thermal systems for hot water production in Hong Kong

    International Nuclear Information System (INIS)

    Li Hong; Yang Hongxing

    2009-01-01

    This paper presents the evaluation results of conventional solar water heater (SWH) systems and solar assisted heat pump (SAHP) systems for hot water production in Hong Kong. An economic comparison and global warming impact analysis are conducted among the two kinds of solar thermal systems and traditional water heating systems (i.e. electric water heaters and towngas water heaters). The economic comparison results show that solar thermal systems have greater economic benefits than traditional water heating systems. In addition, conventional SWH systems are comparable with the SAHP systems when solar fractions are above 50%. Besides, analysis on the sensitivity of the total equivalent warming impact (TEWI) indicates that the towngas boosted SWH system has the greatest potential in greenhouse gas emission reduction with various solar collector areas and the electricity boosted SWH system has the comparative TEWI with the SAHP systems if its solar fraction is above 50%. As for SAHP systems, the solar assisted air source heat pump (SA-ASHP) system has the least global warming impact. Based on all investigation results, suggestions are given on the selection of solar thermal systems for applications in Hong Kong