WorldWideScience

Sample records for em regiao industrial

  1. Evaluation of pollution effects in transmission lines located in industrial areas; Avaliacao dos efeitos da poluicao em linhas de transmissao situadas em regiao industrial

    Energy Technology Data Exchange (ETDEWEB)

    Kanashiro, Arnaldo G.; Burani, Geraldo F. [Sao Paulo Univ., SP (Brazil). Inst. de Eletrotecnica e Energia; Nascimento, Iara R. [Eletricidade de Sao Paulo SA, SP (Brazil)

    1995-12-31

    This work aims to determinate a correlation between the pollution levels and electric power transmission lines maintenance procedures in order to establish the necessary procedures for specific pollution levels. The methodology is presented. The results obtained in field tests and bench scale tests are presented and discussed. The so called pollution equivalent is determined for each site of the transmission line studied and maintenance procedures are established 6 refs., 5 figs., 4 tabs.

  2. Methodology to evaluate the energy associated to the industrial solid wastes: application in a metropolitan region of Campinas, Sao Paulo state, Brazil; Metodologia para avaliacao da energia associada ao residuo solido industrial: aplicacao a regiao metropolitada de Campinas

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Tereza Rosana Orrico [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Curso de Pos-graduacao em Planejamento de Sistemas Energeticos; Teixeira, Egle Novaes [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo; Silva, Ennio Peres da [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico. Lab. de Hidrogenio

    2004-07-01

    The aim of this work is to the application of a methodology to evaluate the energy associated to the industrial solid wastes in the metropolitan region of Campinas. The methodological route proposed is: the characterization of the research area and the production/management of the industrial solid wastes; the energetic classification and the qualitative/quantitative research of the energy associated to the industrial solid wastes; and, the valuation of the applicability of the energetic utilization mechanisms proposed to the region. This methodology when applied at the Campinas metropolitan region proved to be valid and it resulted in a synthetically presentation of the social and environmental reality of the industrial sector and the destination of the wastes, as well as it indicated the potentialities related to the energetic utilization of the industrial solid waste in the region. With the obtained results it was shown the importance of the the production and the destination of the industrial solid wastes in the Campinas metropolitan region , and the meaning, in terms of electric potency, of the values of the energy associated to the wastes with a known factor of energetic conversion shown in the researched sample. (author)

  3. Ambiente e competitividade industrial em Portugal

    OpenAIRE

    Caetano, Gonçalo

    2000-01-01

    O principal desafio que se coloca ao desenvolvimento industrial português, num enquadramento competitivo marcado, sobretudo, pela globalização e aprofundamento e alargamento da integração europeia, é, sem dúvida, o da promoção sustentada da competitividade, entendida como variável global, relativa e pluridimensional, resultante de processos económicos, tecnológicos, sociais, institucionais e políticos complexos, e caracterizadora da performance das empresas industriais.

  4. DOE EM industry programs robotics development

    International Nuclear Information System (INIS)

    Staubly, R.; Kothari, V.

    1998-01-01

    The Office of Science and Technology (OST) manages an aggressive program for RD and D, as well as testing and evaluation for the Department of Energy's (DOE's) Environmental Management (EM) organization. The goal is to develop new and improved environmental restoration and waste management technologies to clean up the inventory of the DOE weapons complex faster, safer, and cheaper than is possible with currently available technologies. Robotic systems reduce worker exposure to the absolute minimum, while providing proven, cost-effective, and, for some applications, the only acceptable technique for addressing challenging problems. Development of robotic systems for remote operations occurs in three main categories: tank waste characterization and retrieval; decontamination and dismantlement; and characterization, mapping, and inspection systems. In addition, the Federal Energy Technology Center (FETC) has some other projects which fall under the heading of supporting R and D. The central objective of all FETC robotic projects is to make robotic systems more attractive by reducing costs and health risks associated with the deployment of robotic technologies in the cleanup of the nuclear weapons complex. This will be accomplished through development of robots that are cheaper, faster, safer, and more reliable, as well as more straightforward to modify/adapt and more intuitive to operate with autonomous capabilities and intelligent controls that prevent accidents and optimize task execution

  5. Application of field-bus to interface field instrumentation in hazardous areas of TRANSPETRO pipelines and terminals, Sao Paulo region; Aplicacao de barramento de campo (fieldbus) em areas classificadas nos dutos e terminais da TRANSPETRO, regiao de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Corcioli, Mario Sergio [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The following presentation focuses on the experiences that we have been adopting with success during the past seven (7) years at the TRANSPETRO Pipelines and Terminals, in the State of Sao Paulo region, to integrate the field instruments (switches, actuators, solenoid valves, motor starter and switchgear panels, and so on) installed in the hazardous areas, to Programmable Logic Controllers (PLC) connected to Remote Input and Output Modules (I/O) in the hazardous area, designated to interface the field signals and condition them to communicate via a bus in the field (field bus), making use of a standard open type industrial communication bus - PROFIBUS DP V1, under which the independent manufacturers follow the industrial Standards EN50170 and EN50254, pointing out the advantages of the application of this instrumentation philosophy, that among other philosophies, allows the use of engineering tools for the asset management and to assist the maintenance and operation of industrial plants. (author)

  6. The use of lichens as bioindicators of atmospheric contamination by natural radionuclides and metals in a region impacted by TENORM; Utilizacao de liquens como bioindicadores de contaminacao atmosferica por radionuclideos naturais e metais em regiao impactada por TENORM

    Energy Technology Data Exchange (ETDEWEB)

    Leonardo, Lucio

    2010-07-01

    The main aim of this thesis is to study the possibility of using lichen as bioindicator of atmospheric pollution in regions contaminated by radionuclides, metals and rare earth elements. Two regions were chosen, one in Pirapora do Bom Jesus, where a tin and lead industry is located, and a second one in Cubatao, where a phosphate fertilizer industrial complex is located. The two industries chosen are considered as TENORM - Technologically Enhanced Naturally Occurring Radioactive Material, since they can cause a significant increase in the natural radionuclides concentration in the industrial process, and consequently a potential increase in the radiation exposure in products, byproducts and residue. To achieve this aim, the radionuclides {sup 238}U, {sup 226}Ra, {sup 210}Pb, {sup 2'}3{sup 2}Th and {sup 228}Ra, rare earth elements and metals were analyzed in samples of raw material and residues from the installations, lichens and soils. Lichens and soil samples were analyzed by instrumental neutron activation analysis for the determination of uranium, thorium, rare earth elements and metals. The radionuclides {sup 226}Ra, {sup 228}Ra and {sup 2}'1{sup 0}Pb in soil samples were determined by gamma spectrometry and in lichen sample by radiochemical separation and gross alpha and beta counting on a gas flow proportional counter. The concentrations of {sup 238}U (from 19 to 473 Bq kg{sup -1}), {sup 226}Ra (from 21 to 265 Bq kg{sup -1}), {sup 210}Pb (from 401 to 1461 Bq kg{sup -1}), {sup 232}Th (from 15 to 574 Bq kg{sup -1}), {sup 228}Ra (from 176 to 535 Bq kg'-{sup 1}), rare earth elements, Hf and Ta determined in lichen samples around the tin and lead industry show an enrichment in these elements. Therefore, the lichens can be used as a fingerprint of the atmospheric contamination. The results obtained for the lichen samples, in the Cubatao region, present a fingerprint mainly of {sup 210}Pb, from industries of the region. The results obtained in this

  7. Technological characterization of new clay deposits in the south region of Amapa, Brazil aiming applications in the ceramic industry; Caracterizacao tecnologica de novos depositos de argilas da regiao sul do Amapa visando aplicacoes na industriav ceramica

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Adriano Lima da; Luna, Carlos Bruno Barreto; Chaves, Alexsandra Cristina; Neves, Gelmires de Araujo, E-mail: adrianolimadasilva@hotmail.com, E-mail: brunobarretodemaufcg@hotmail.com [Universidade Federal de Campina Grande (UAEMa/CCT/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais

    2017-01-15

    The objective of the present work was to characterize two new Clay deposits (A and B) from the south region of Amapa state, aiming to establish their adequate uses as ceramic raw materials and to promote the potential of the ceramic industry in the region. Were prepared specimens by uniaxial pressing, being applied a two phase pressing of 13,4 MPa and 20 MPa, respectively. The samples were dried in an oven at 110 deg C, and submitted to burning at 850, 1000 and 1200 deg C. Were determined linear firing shrinkage, water absorption, apparent porosity and modulus of flexural modulus of rupture, as well as mineralogical evolution after burning. Finishing, the microstructure of the sintered clay at 1200 deg C was evaluated in a scanning electron microscope. The results showed that the clay A presented a better mechanical development, having a red coloration and, therefore, potential to the red ceramic industry. On the other hand, the clay B presented a light color, due to a low content of iron oxide and, therefore, having potential as refractory raw material. In general, one clay is suitable to be used in white ceramic and the other in red ceramic. (author)

  8. Characterization of clay and mass used in red ceramic industry in Cariri region - Ceara; Caracterizacao de argilas e massas utilizadas na industria G. Matos de ceramica vermelha na regiao do Cariri - Ceara

    Energy Technology Data Exchange (ETDEWEB)

    Neta, I.A.B.; Cartaxo, A.S.; Esmeraldo, A.D.; Gomes, F.F.; Silva, F.C.; Ribeiro, S.B.N.; Neiva, L.S.; Brasileiro, M.I. [Universidade Federal do Cariri (UFCA), Juazeiro do Norte, CE (Brazil)

    2016-07-01

    The study of the characteristics of raw materials used in the production of red ceramic industry articles, such as bricks and tiles, has a key role in determining the quality of the final product. This study aims to evaluate the chemical and physical properties of clays and pasta from pottery G. Matos, Crato, Ceara. Three samples were collected, processed and submitted to the characterization DRX. They were also analyzed for plasticity by the methods of Atterberg and Pfefferkorn. In the method Atterberg, samples and Fat Mass Ready clay are within the plasticity index range for red ceramics, Pferfferkorn method, pasta and ready Fat also had plasticity, but with different results of the above method. In both ostestes, the red mass showed no moldability. XRD, the samples show quartz peaks, which were in the greatest amount in the sample that did not develop plasticity, addition, montmorillonite obtained peaks kaolinite. (author)

  9. Use of Remote Sensing and Local Knowledge for Geoconservation of Regiao dos Lagos, Brazil

    Science.gov (United States)

    Avelar, S.; Vasconcelos, G.; Mansur, K. L.; Anjos, S. C.

    2013-12-01

    A series of lagoons can be found along the coastline of Rio de Janeiro, in the so-called Regiao dos Lagos. The lagoons differ in size, physicochemical, sedimentological and biological characteristics. Rare examples of litifying microbialites that produce stromatolites, the oldest fossils on Earth, can be found living in this lagoon system. The occurrence of stromatolites in the region is of great scientific interest because it enables the study of possible analogues of the earliest life on Earth. However, this region has been suffering from intense human activities and degradations. Geoconservation planning requires an assessment of the characteristics of the region and its potential threats. The primary goal of this study is to assess physical environmental changes and anthropogenic impacts over the last four decades in Regiao dos Lagos. Using a broad integrative assessment combining remote sensing, GIS, field studies and local knowledge of communities, land-cover and land-use classes were identified, as well as the main human activities impacting the environment. The seasonal and weekend tourism and urban sprawl in this coastal area of Rio de Janeiro triggers the occupation of new areas and the removal of natural vegetation, especially on lagoon margins. This disorderly occupation by an ever increasing population, with both legal and illegal constructions and the subsequent overload of the local infrastructure, e.g. increase of electrical energy consumption, volume of vehicles, pollution in air, water and soil and problems with water supply and wastewater treatment, are hastening the gradual degradation of the lake ecosystem. The main driving forces to environmental changes over the last four decades in Regiao dos Lagos were the change of dense vegetation, saline and bare soil classes into built-up areas, adding to the poor waste treatment and inadequate sewage disposal. This analysis provides a basis for a better control of anthropogenic impacts and

  10. Topics to study the integrated use of natural gas in the electricity with industrial focus: a methodology for optimizing its use with application in the Vale do Paraiba region (SP-Brazil); Topicos para o estudo da utilizacao integrada do gas natural na eletricidade com enfoque industrial: uma metodologia para otimizacao de seu aproveitamento com aplicacao na regiao do Vale do Paraiba

    Energy Technology Data Exchange (ETDEWEB)

    Paro, Andre C.; Borelli, Samuel J.S. [PROMON Engenharia SA, Sao Paulo, SP (Brazil); Santos, Edmilson M. [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia; Fadigas, Eliane A. [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica

    2004-07-01

    After the recent announcement on the discovery of a large amount of Natural Gas (NG) in the Santos Field by PETROBRAS, use incentive policies for its consumption and consequent growth participation in the national energy matrix gained strength This paper intends to present an efficient use optimization methodology for the NG integrated to Electricity with focus on it's industrial use under the concepts of Integrated Resources Planning (IRP). Thus, the topics about NG utilization in cogeneration plants are analyzed, showing it's utilization on Electric Energy (EE) and Process Heat (Steam) supply. Its contribution to the distributed Electric Energy generation, which brings the installed generation power closer to the consumer centers and mitigates energy transmission losses, are also presented. The IRP concept is applied on the integration between industrial use and other uses of NG and on the detailing of its influence on the electric sector. Finally, a case study is presented, applying the presented methodology for the use of NG in the industry of 'Vale do Paraiba' Region (SP-Brazil), due to its industrial economy condition and easy access to the Brazilian proved reserves geographic condition. (author)

  11. Geologia e quimioestratigrafia do Grupo Vazante em Lagamar (Minas Gerais, Brasil)

    OpenAIRE

    Carla Sofia de Sousa Marques

    2015-01-01

    Este trabalho tem como base um mapeamento geologico na escala 1:50.000 de uma area de 400km2 nos arredores da cidade de Lagamar (MG) e um estudo de perfis quimioestratigraficos com isotopos estaveis de 13C, 18O e 87Sr/86Sr nas formacoes Lagamar e Rocinha do Grupo Vazante. Na regiao afloram rochas da porcao basal do Grupo Vazante, em contato tectonico com o Grupo Bambui. Foram identificadas as formacoes Santo Antonio do Bonito, Rocinha, Lagamar e Serra do Garrote no Grupo Vazante, e no Grup...

  12. Industrial pollution in the region of Paripe-Salvador: effects on the distribution of electric power and possible damages to human health; Poluicao industrial na regiao de Paripe-Salvador: efeitos sob a distribuicao de energia eletrica e possiveis danos a saude humana

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Cleuber Sobreira da Silva; Bomfim, Mario Antonio Duarte; Pereira, Osvaldo Soliano [Universidade Salvador (UNIFACS), BA (Brazil). Curso de Mestrado em Regulacao da Industria de Energia], e-mail: cchaves@coelba.com.br, e-mail: osoliano@unifacs.br

    2008-07-01

    In the area of Paripe, in the suburb of Salvador, Bahia, the distribution of electric power of the Company of Electricity of the State of Bahia (COELBA) is facing serious problems with the industrial pollution. That pollution affects the whole distribution net, causing fortuitous lack of energy, in many cases even daily in their feeders. The problem happens due to the accumulation of material associated along the net and more precisely in the distribution insulators, generating a type of dirt, no removable for normal procedures, in the surface of that insulator and it will cause escape currents, causing the lack of energy of the whole distribution electric net. The subject presented in that paper refers to the project of Research and Development (P and D), about Atmospheric Pollution in Insulators of Distribution. The results of the research showed that the atmospheric pollution could cause problems to the population that lives close the polluted area. The purpose of that article is to present relevant data related to the distribution net of COELBA, where there are many lacks of energy and the possibility of do not respect the criterion of quality of the National Agency of Electric power (ANEEL), besides the damages caused the population. (author)

  13. Arquitetura Industrial em Recife: uma face da modernidade

    OpenAIRE

    Maria Vieira Caldas, Renata

    2010-01-01

    Construções ligadas aos processos produtivos (produção, estocagem, distribuição e comercialização) são constituintes de um abrangente grupo denominado edifícios industriais. De um modo geral, estas construções se desenvolveram como parte de dois fenômenos cruciais da modernidade: a mecanização e a industrialização; o que fez delas uma de suas faces ou expressão. Num movimento de redução de suas formas ao estritamente necessário, o edifício industrial passou, ele próprio, a s...

  14. Esterilização de farinha de subprodutos animais em esterilizador industrial Industrial sterilization of animal meal

    Directory of Open Access Journals (Sweden)

    Marcio Antônio Mazutti

    2010-03-01

    Full Text Available As farinhas de subprodutos animais se apresentam como uma fonte praticamente completa da maioria dos aminoácidos requeridos para uma alimentação equilibrada. Estas farinhas são amplamente usadas para corrigir as deficiências nutricionais, que ocorrem em outras matérias-primas para rações, como os farelos de origem vegetal. No entanto, constituem um ambiente favorável à proliferação de microrganismos, tanto durante o processamento quanto na estocagem. A Portaria SARC 002 de 13/02/2003 no Anexo I da Instrução Normativa Número 15 do Ministério da Agricultura, Pecuária e Abastecimento propõe que a etapa de esterilização das farinhas poderá ser realizada antes do processo de cocção dos subprodutos ou na própria farinha, contanto que seja empregado vapor saturado direto a uma temperatura mínima de 133 °C por um tempo mínimo de 20 minutos. Industrialmente, o que se deseja é obter um produto final com padrões higiênicos sanitários aceitáveis, com teor proteico o mais alto possível. Nesse sentido, o objetivo deste trabalho foi investigar diferentes estratégias de processamento da farinha de subprodutos de indústria de aves, observando aquela mais eficiente para a esterilização: se no subproduto antes da digestão ou se na própria farinha. Foram realizados testes em escala piloto com capacidade para 150 kg e em escala industrial com capacidade de 3.000 kg. O processo de esterilização em escala industrial apresentou um melhor desempenho comparado com o processo piloto. O teor de proteína aumentou em todos os testes e a digestibilidade final da farinha foi de aproximadamente 92%, o que eleva seu valor de mercado. Com relação à eliminação de microrganismos, o processo industrial foi eficiente, uma vez que não foi verificada contagem em nenhum dos três testes realizados.Animal meal obtained from animal offal offers a fairly complete source of most of the aminoacids required for a balanced animal diet. These

  15. Radiologic accidents in industrial gamma radiography - Brazilian cases; Acidentes radiologicos em gamagrafia industrial - casos brasileiros

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Francisco Cesar Augusto da [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil)

    1997-12-31

    Three severe radiological accidents in industrial gamma radiography happened in Brazil during the period of 1985 to 1988. Five operators and nineteen public people were involved. These accidents caused some injuries in parts of the body, mainly hands and fingers. The main causes were faults in source monitoring, inadequate routine procedures and unknowing of radiation warning symbol by public people. The present paper shows the Brazilian cases of radiological accidents and makes some analysis of them. (author) 1 ref., 1 tab.; e-mail: dasilva at ird.gov.br

  16. Groundwater radon, radium and uranium concentrations in Regiao dos Lagos, Rio de Janeiro State, Brazil

    International Nuclear Information System (INIS)

    Almeida, R.M.R.; Lauria, D.C.; Ferreira, A.C.; Sracek, O.

    2004-01-01

    Ground water from Regiao dos Lagos, a coastal area of Rio de Janeiro state, was analysed for 226 Ra, 228 Ra, 222 Rn, 238 U, major ion concentrations, and physico-chemical parameters were also measured. Concentrations values ranged from -1 for 226 Ra, from -1 for 228 Ra and from -4 to 8.0x10 -2 Bq l -1 for 238 U. Detectable 222 Rn concentrations (>3 Bq l -1 ) were found only in two samples. The spatial distribution of Ra concentration delineated one distinct area and some hot spots with high Ra concentration. Low pH value is the most important water parameter linked to high radium concentration. This is probably related to limited adsorption of radium on soil ferric oxides and hydroxides at low pH range. There was a significant correlation between uranium concentrations and electrical conductivity values, and also between uranium concentrations and concentrations of Ca, Mg, Na, K, and Cl, indicating sea water impact. Uranium concentrations were lower than maximum contaminant level for drinking water, whereas 17 out of the 88 ground water samples had levels of radium that exceeded the maximum contaminant level for tap water. The total annual effective dose for adult due to the water consumption reaches values up to 0.8 mSv

  17. Occupational health I: The method of collective interviews applied to the study of the work-weariness process of workers of alcohol distilleries in the region of Ribeirao Preto; Saude do trabalhador I: o metodo de entrevistas coletivas aplicado ao estudo do processo trabalho-desgaste operario em destilaria de alcool na regiao de Ribeirao Preto

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo Pinheiro, Sandra de; Ruffino Netto, Antonio [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Medicina. Dept. de Medicina Social

    1994-07-01

    The author presents the method of investigation used in the study of the work-weariness process of workers of alcohol distilleries in the region of Ribeirao Preto - Sao Paulo State, Southeast Brazil. The study was based on the methodology proposed by Laurell and Noriega (1989), and on the collective interviews carried out with groups of workers from four large sectors of an alcohol distillery: the patio, the crushing sector, the boilers and the evaporation sector, and the fermentation and distillation sectors. The information obtained from the workers and collectively agreed by them, was compares to other sources of data: notification of the occupational accidents, reports of the Regional Labor Office, direct observation of the industrial environment, items of the collective agreement, and supplementary clinic-laboratory tests, among others. (author) 24 refs.

  18. Real time EM waves monitoring system for oil industry three phase flow measurement

    International Nuclear Information System (INIS)

    Al-Hajeri, S; Wylie, S R; Shaw, A; Al-Shamma'a, A I

    2009-01-01

    Monitoring fluid flow in a dynamic pipeline is a significant problem in the oil industry. In order to manage oil field wells efficiently, the oil industry requires accurate on line sensors to monitor the oil, gas, and water flow in the production pipelines. This paper describes a non-intrusive sensor that is based on an EM Waves cavity resonator. It determines and monitors the percentage volumes of each phase of three phase (oil, gas, and water) in the pipeline, using the resonant frequencies shifts that occur within an electromagnetic cavity resonator. A laboratory prototype version of the sensor system was constructed, and the experimental results were compared to the simulation results which were obtained by the use of High Frequency Structure Simulation (HFSS) software package.

  19. Steps in the diagnosis of energy for the establishment of a rational use of energy in an agroprocessing of wood forest planting in the southwest of the state of Sao Paulo; Etapas do diagnostico energetico para a implantacao de um programa de uso racional de energia em um agroindustria de beneficiamento de madeira de florestas plantadas na regiao sudoeste do estado de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Caneppele, Fernando de Lima; Souza, Caroline Mazzini de [Universidade Estadual Paulista (UNESP), Itapeva, SP (Brazil). Campus Experimental], E-mail: fernando@itapeva.unesp.br; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural

    2010-07-01

    This work shows the steps for implementing a program of rational use of electricity in a pine sawmill processing through energy diagnosis and also provide an energy efficiency index, the reference consumption in Kw.h power and volume of timber in cubic meters. The study was conducted in a sawmill located at Itapeva, southwest of Sao Paulo. The region's economic potential is based on the processing of wood with the main export destination. Much of the lumber does not have advanced technology, because it may present with excessive spending power. The species used are Pinus elliottii and Pinus taeda. We collected data on the electrical installation of the mill and the main parts of the installation as tables and distribution lines and equipment engines were studied. The diagnostic results show that while the industry had a good general appearance, electrical installations and equipment using electric power for its functioning need more care, both in maintenance and in use. An energy efficiency program, if effected, could reduce the cost of the process and provides environmental benefits by less need for electric power generation. (author)

  20. Productive Liquid Fertilizer from Liquid Waste Tempe Industry as Revealed by Various EM4 Concentration

    Science.gov (United States)

    Hartini, S.; Letsoin, F.; Kristijanto, A. I.

    2018-04-01

    Recently, using of productive liquid fertilizer assumed as a proper and practical fertilizer for plant productivity purposes. Various ways of enrichment of liquid fertilizer were done to achieve certain quality. The purpose of this research was to determine the proper additional formulation in the process of making productive liquid fertilizer based on the various concentration of EM4 as well as comparated the result with SNI. Liquid tempe waste were collected from some tempe industries at Sidorejo Kidul village, Tingkir district, Salatiga. The concentration of EM4 which were added to the tempe wastewater are 0%; 0.20%; 0.40%; 0.60%; 0.80%; 1.00% respectively. The pH, temperature, C total, N total, C/N ratio, and PO4 3- were measured. Data was analyzed by using Randomize Completely Block Design (RCBD) with 6 treatments and 4 replications. Comparison between the average, the Honestly Significance Deference (HSD) 5% was used. The results showed that the addition of EM4 indicated there were a significant progress. Moreover, the most effective formula to increase the quality of productive liquid fertilizer from liquid waste tempe was found in addition of 1.00% EM4 with the gained analysis value for the C total, N total, C/N ratio, and degree of PO4 3- as follows : 4.395 ± 1.034%; 1.470 ± 0.081%; 3.01 ± 0.756; 685.28 ± 70.44 ppm . Associated with the need fulfillment of SNI hence can be concluded that result of Productive Liquid Fertilizer (PLF) from liquid waste tempe successfully fulfill SNI of liquid fertilizer for pH parameter and total N, only.

  1. Preliminary analysis of the regolithic clay covers from the region of Alfenas, Minas Gerais, Brazil, aiming to evaluate its use in the traditional ceramic industry; Analise preliminar das coberturas regoliticas argilosas da regiao de Alfenas, Minas Gerais, Brasil, visando sua utilizacao na industria de ceramica vermelha

    Energy Technology Data Exchange (ETDEWEB)

    Gaspar, Junior, L A; Varajao, A F.D.C. [Universidade Federal de Ouro Preto (UFOP), MG (Brazil). Escola de Minas. Dept. de Geologia; Moreno, M M.T. [Universidade Estadual Paulista (UNESP), Rio Claro, SP (Brazil). Dept. de Petrologia e Metalogenia

    2009-07-01

    The region of Alfenas, in the state of Minas Gerais, Brazil, is predominantly constituted of Pre-Cambrian rocks with well developed alteration profiles in association with colluvial and alluvial sediments. No study to date has examined in detail its potential use in the ceramic industry. The scarce knowledge of its mineralogical and technological properties limits its value and consequently its industrial use. Until now, these clay materials have been used in a rudimental manner, in small scale in the fabrication of red tiles. The present study aimed at analyzing these clays mineralogically (X-ray diffraction), chemically (major and minor elements by X-ray fluorescence and organic carbon analysis) and technologically (pressing granulometric distribution; mechanical resistance; water absorption, apparent porosity; linear firing shrinkage; color of firing and others) in order to better understand the raw material and develop adequate technological applications. The best results of ceramic properties were the samples with higher organic content (more plastic clays) and higher values of Al{sub 2}O{sub 3} (kaolinite and gibbsite) and Fe{sub 2}O{sub 3} as well lower SiO{sub 2} content and finer grain size which contribute to a better sintering. (author)

  2. Utilização de efluente tratado em complexo industrial automotivo

    Directory of Open Access Journals (Sweden)

    Sandro Carlos Pohl

    Full Text Available RESUMO Neste trabalho, realizaram-se modificações nos sistemas produtivo e de tratamento de efluentes em um complexo industrial automotivo a fim de possibilitar a utilização do efluente tratado no sistema de torres de resfriamento. Inicialmente, realizou-se um balanço hídrico nos processos industriais para determinar o consumo de água e analisou-se a qualidade do efluente tratado quanto aos parâmetros físico-químicos em dois pontos do sistema de tratamento de efluentes: no decantador secundário (P1 do tratamento físico-químico e na saída da lagoa de polimento (P2. Essas análises mostraram que o efluente tratado no decantador secundário não tem capacidade de atender às especificações da água de circulação das torres de resfriamento sem a realização de muitas alterações em seu tratamento, optando-se pela utilização do efluente tratado na saída da lagoa de polimento após modificações, como: alteração na concentração de ácido fosfórico e de ácido nítrico da solução de limpeza dos tanques de fosfatização, elevação em 50% da capacidade de aeração da lagoa aerada e troca do coagulante sulfato de alumínio pelo cloreto férrico no tratamento físico-químico. Assim, os parâmetros do efluente tratado na lagoa de polimento aproximaram-se aos parâmetros especificados para água de torres de resfriamento. A introdução desse efluente na proporção de 40% do volume da água de circulação na torre de resfriamento resultou em elevação do ciclo de dureza e redução no ciclo de sílica. A utilização de um filtro abrandador na saída da lagoa de polimento proporcionou a redução dos parâmetros de qualidade da água para valores similares aos da água de recirculação nas torres de resfriamento.

  3. Magnetomotive colon elastography: preliminary assessment; Elastografia magnetomotriz da regiao do colon: avaliacao preliminar em phantoms

    Energy Technology Data Exchange (ETDEWEB)

    Bruno, A. Colello, E-mail: alexandrecolellobruno@usp.br [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Medicina; Grillo, F.W.; Sampaio, D.R.T.; Carneiro, A.A.O. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia Ciencias e Letras

    2015-08-15

    Colorectal cancer (CRC) is the third most common malignant neoplasm worldwide and early diagnosis reduces morbidity. The standard preventive exams methods are uncomfortable for the patient, invasive, and /or are ionizing. Here, we evaluate the potential of magneto-motive ultrasound (MMUS) as a new, minimally invasive CRC screening technique. We developed a hybrid transducer (comprised of an ultrasound probe and a magnetic coil system) to construct relative elastography maps in a paraffin phantom with isoechoic inclusions. The electromagnetic component of our system manipulated ferromagnetic fluid located inside of our synthetic colon, and the captured ultrasound images were used to produce relative elastography maps. The MMUS images reveal by otherwise invisible structures based on differences in stiffness. Ultrasound elastography (relative) images by MMUs technique complements usual preventive CRC exams, is minimally invasive, has relative low cost when compared with others image methods. Also is fast diagnose and more comfortable for patient which prevents withdrawal of the screening. (author)

  4. Torta de filtro como biofertilizante para produção de mudas de tomate industrial em diferentes substratos

    Directory of Open Access Journals (Sweden)

    Patrícia Coelho de Souza Barros

    2014-06-01

    Full Text Available A torta de filtro é uma alternativa promissora como matéria prima na complementação dos nutrientes essenciais para o desenvolvimento de mudas de hortaliças. Este trabalho objetivou avaliar o desenvolvimento de mudas de tomate industrial cultivadas em ambiente protegido, aplicando-se diferentes doses de torta de filtro, como biofertilizante, em substrato comercial e solo. Delineamento experimental foi de blocos casualizados com seis tratamentos e sete repetições totalizando 42 parcelas, para cada substrato. Cada unidade experimental consistia de copos com capacidade para 200 mL, nos quais foi incorporada a torta de filtro nas seguintes doses: 0, 2, 4, 6, 8 e 10 Mg ha-1. As variáveis respostas observadas foram: altura de plantas (cm; massa da matéria verde da parte aérea (g; massa seca da parte aérea (g. A utilização da torta de filtro tem efeitos positivos na produção de mudas de tomate industrial. A dose de torta de filtro adicionada ao substrato comercial que proporcionou o melhor desenvolvimento de mudas de tomate industrial é de 6,5 Mg ha-1. Com este ensaio, não foi possível atingir a dose ótima de torta de filtro, a qual representa o melhor desenvolvimento de mudas de tomate industrial, quando cultivado em solo, sugerindo o uso de doses maiores em experimentos posteriores.

  5. Utilização da Areia Industrial em Argamassas de Revestimento

    Directory of Open Access Journals (Sweden)

    Luana Cechin

    2016-06-01

    Full Text Available Este trabalho tem como objetivo a caracterização da Areia Industrial identificando suas propriedades físicas e mecânicas, através de ensaios de laboratório. Esse trabalho compara essas propriedades com os resultados obtidos utilizando a areia natural, na confecção de argamassas. Para fazer estas análises foram realizados ensaios nas areias conforme as Normas Técnicas da ABNT (Associação Brasileira de Normas Técnicas, bem como nas argamassas moldadas em corpos de prova prismáticos. Foram realizados ensaios de compressão, e de tração na flexão. Para a comparação da ação dessas areias, foram usados (cinco traços diferentes na composição da argamassa, ou seja: 100% areia natural; 75% areia natural e 25% areia artificial; 50% areia natural e 50% areia artificial; 25% areia natural e 75% areia artificial; e 100% areia artificial. Como resultado observou-se que a areia industrial possui características que possibilitam o seu uso como componente de pastas de argamassas de revestimento. Observou-se ainda que para um mesmo fator água/cimento, ocorre a redução da trabalhabilidade, quando se compara com a argamasse feita com a areia natural.

  6. A ressaca pós-industrial e o laddism em Trainspotting

    Directory of Open Access Journals (Sweden)

    Fabiane Lazzaris

    2016-04-01

    Full Text Available O artigo discute o impacto do cenário político e social das últimas décadas do século XX na produção literária escocesa, tendo como objeto de análise o romance Trainspotting (1993, de Irvine Welsh. Argumenta-se que o vácuo existencial potencializado pelo abuso de drogas não constitui o tema central da obra e que, na verdade, o livro problematiza o sentimento de letargia de uma geração desiludida com o modelo econômico da sociedade pós-industrial do fim do século XX. As drogas e a consequente inércia dos personagens de Trainspotting são representadas por Welsh como elementos de subversão em oposição ao modelo de sociedade profundamente consumista. Ademais, o desemprego massivo acaba criando novas relações sociais entre os homens e as mulheres, o que gera uma forte onda de afirmação que perpassa o machismo, o laddism.

  7. A study of the strategic alliance for EMS industry: the application of a hybrid DEA and GM (1, 1) approach.

    Science.gov (United States)

    Wang, Chia Nan; Nguyen, Nhu Ty; Tran, Thanh Tuyen; Huong, Bui Bich

    2015-01-01

    Choosing a partner is a critical factor for success in international strategic alliances, although criteria for partner selection vary between developed and transitional markets. This study aims to develop effective methods to assist enterprise to measure the firms' operation efficiency, find out the candidate priority under several different inputs and outputs, and forecast the values of those variables in the future. The methodologies are constructed by the concepts of Data Envelopment Analysis (DEA) and grey model (GM). Realistic data in four consecutive years (2009-2012) a total of 20 companies of the Electronic Manufacturing Service (EMS) industry that went public are completely collected. This paper tries to help target company-DMU1-to find the right alliance partners. By our proposed approach, the results show the priority in the recent years. The research study is hopefully of interest to managers who are in manufacturing industry in general and EMS enterprises in particular.

  8. The Furniture Industry In Londrina A Indústria de Móveis em Londrina

    Directory of Open Access Journals (Sweden)

    Marcia Regina Gabardo da Câmara

    2004-11-01

    Full Text Available The Brazilian furniture industry is organized in clusters. Cluster is an agglomerate of located companies in a certain area that you/they develop their activities in an articulate way and with a logic in common and whose dynamics depends on the fact that those companies accomplish similar activities, use specific labor and raw materials, etc. inducing interaction and synergy, due to articulated performance, they provide to the group of companies competitive advantages that are reflected in an differentiated performance. The companies agglomerated geographically, mainly SMEs - small and medium enterprises - present success - greater competitiveness, generation of jobs, technological innovations, etc. In the area of Londrina - PR, there is a geographical agglomerate of companies producing of pieces of furniture, with prominence for the residential pieces of furniture and of office. The study tried to identify if the geographical gathering of furniture companies in the area corresponds or not to a cluster. A great potential was verified for the development of the same, due to the proximity with customers and suppliers and in relation to the available infrastructure of services. However, any form of cooperative action was not verified among companies or enter companies to develop complementary activities, it was not also verified any institution or support association for the companies. It is concluded that in the area of Londrina, the cluster is incipient because in spite of the gathering of companies, due to the low vertical links and absence of horizontal and multilateral links that characterize more advanced clusters, the synergetic effects of the gathering are not verified.A indústria moveleira brasileira está organizada em clusters. Cluster é um aglomerado de empresas localizadas em uma determinada região que desenvolvem suas atividades de forma articulada e com uma lógica em comum e cuja dinâmica pode ser determinada pelo fato dessas

  9. Implementação de um sistema de custos baseado em atividades em um ambiente industrial

    OpenAIRE

    Gino Berninzon Di Domenico

    1994-01-01

    Resumo: Este trabalho descreve inicialmente, as principais características, a estrutura e as limitações dos sistemas de custeio tradicionais. Nesta etapa detalha-se os Sistemas de Custeio Total, apresentando os modelos dos Sistemas de Custeio por Taxa e do Sistema de Custeio por Absorção. Posteriormente, são introduzi das e detalhadas as características básicas e a estrutura de uma nova abordagem para a área de custos, a do Custeio -Baseado em Atividades (Activity Based Costing). É desenvolv...

  10. Sogenbits: Industry 4.0 on muutunud ülioluliseks / Emöke Sogenbits ; [üles kirjutanud] Harro Puusild

    Index Scriptorium Estoniae

    Sogenbits, Emöke, 1962-

    2017-01-01

    "Industry 4.0 on minu jaoks muutunud ülioluliseks,” rääkis Hanza Mechanics Tartu tegevjuht Emöke Sogenbits Tehnoloogia Arenduskeskuse IMECC korraldatud seminaril “Robotid ja automatiseerimine”

  11. Estudo comparativo da resistência do fio de algodão obtido em fiação piloto e em fiação industrial Correlation between laboratory and industrial cotton yarn strength

    Directory of Open Access Journals (Sweden)

    José Fernando Lazzarini

    1972-01-01

    Full Text Available O estudo de 81 pares de valores de resistência do fio de algodão 22/1 produzido em fiação piloto (X e em fiação industrial (Y mostrou que entre os dois processos existe uma correlação r= 0,563**. A equação de regressão é da forma Y= 611,631 + 0,486 X. Ficou demonstrado que equações calculadas para nove linhagens em cada localidade fornecem estimativas mais precisas da resistência do fio do que a equação geral. O coeficiente de correlação mais alto (r=0,924** foi encontrado para a localidade de Campinas.A yarn strength correlation analysis for the 22/1 yarn spun through a Miniature Spinning Plant (X and the yarn of same count spun through an industrial equipment (Y was carried out for 81 pairs of observations. The correlation coeficient between the two processes showed to be r = 0.563 **. The regression equation is of the form: Y = 611.631 + 0.486X. It was showed that the equations to predicted yarn strength, calculated for 9 pairs of values in each location, give better estimations than the general equation calculated for 81 pairs in 9 locations. The highest correlation coefficient (r = 0.944 ** was found for the locality of Campinas.

  12. Consumer protection through a legislative ban on industrially produced <em>trans> fatty acids in foods in Denmark

    DEFF Research Database (Denmark)

    Stender, Steen; Dyerberg, Jørn; Astrup, Arne

    2006-01-01

    or quality of foods previously containing high amounts of IP-TFA. Various public health organizations, including the World Health Organization, have recommended reducing the consumption of IP-TFA, and efforts have been made in several countries to comply, through the mandatory TFA labelling of prepackaged......Legislation has, within a few years, virtually eliminated the intake of industrially produced trans fatty acids (IP-TFA) in Denmark, by banning any food with an IP-TFA content greater than 2% of total fat. This accomplishment has been obtained without noticeable effects on the availability, price...... food, societal pressure and industrial initiatives to lower the content of IP-TFA in foods. Yet still, high concentrations of IP-TFA are found in popular foods in several countries including Norway and Sweden. This indicates that millions of people currently have intakes of IP-TFA that increase...

  13. Environmental Management Systems (EMS ISO 14001 Implementation in Construction Industry: A Malaysian Case Study

    Directory of Open Access Journals (Sweden)

    Sumiani Yusoff

    2015-03-01

    Full Text Available This study seeks to explore the crucial part in EMS implementation; i.e. environmental aspects and impacts, Good Environmental Practice to be developed in construction site, as well as the level of awareness or understanding amongst site staffs on ISO 14001 EMS implementation in their organizations. Data were collected via interviews, surveys and site visits. A number of environmental aspects and impacts, and Good Environmental Practices based on ISO 14001:2004 have been identified. The level of understanding of the site staffs on ISO 14001 EMS requirements has been found to be good except for matters concerning Schedule Waste Management. In conclusion, the successful implementation of ISO 14001 EMS mainly depends on staffs‘ understanding.

  14. DOMINAÇÃO E REPRESSÃO DA SOCIEDADE INDUSTRIAL AVANÇADA EM HOMEM UNIDIMENSIONAL DE HERBERT MARCUSE

    Directory of Open Access Journals (Sweden)

    Ramom Gomes da Silva

    2017-08-01

    Full Text Available Este trabalho apresenta uma reflexão acerca dos instrumentos de dominação e repressão da sociedade industrial avançada. A partir da leitura da primeira parte do livro Ideologia da sociedade industrial: O homem unidimensional, Herbert Marcuse analisa a sociedade industrial avançada e as tendências do capitalismo tardio expondo as novas formas de controle e dominação dos indivíduos na contemporaneidade. Os meios de dominação do capitalismo avançado têm-se mostrado mais eficientes e eficazes do que antigos regimes baseados na violência explícita, isto é, sem uso de um terror aberto, tem o domínio das esferas da existência humana, sejam elas públicas ou privadas. Esses mecanismos de controles proporcionaram a integração entre o pensamento e o comportamento dos indivíduos, de tal modo que o sujeito sente-se livre em situação de não liberdade, situação em que  necessidades impostas são aceitas e ainda repassadas às gerações seguintes sem o menor questionamento.

  15. Fixed-bed gasification for industrial appliances; Gaseificacao em leito fixo para aplicacoes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Makray, Zsolt [Termoquip Energia Alternativa, Campinas, SP (Brazil)

    1988-12-31

    Wood gasification for industrial thermal processes as an alternative to fuel oil has economic, strategic and air pollution advantages. Since 1981, a Brazilian industry developed a line of down-draft gasifiers for industrial heating in the capacity of 0,3 to 3,0 MW thermal. (author) 3 figs.

  16. Sensibilidade a cobre, estreptomicina e oxitetraciclina em Xanthomonas spp. associadas à mancha-bacteriana do tomate para processamento industrial

    Directory of Open Access Journals (Sweden)

    Quezado-Duval Alice Maria

    2003-01-01

    Full Text Available Apesar de amplamente empregados em lavouras de tomate para processamento industrial no Brasil, fungicidas cúpricos e antibióticos registrados para uso agrícola nem sempre resultam em controle eficiente das bacterioses que afetam a cultura. O aparecimento de estirpes resistentes é uma das causas dessa baixa eficiência. Avaliou-se, in vitro, a sensibilidade a cobre, estreptomicina e oxitetraciclina de 389 isolados de Xanthomonas spp. associadas à mancha-bacteriana do tomateiro, sendo 92 de X. axonopodis pv. vesicatoria (60 do grupo "A"/raça T1 e 32 do "C"/raça T3, 93 de X. vesicatoria (grupo "B"/raça T2 e 204 de X. gardneri (grupo "D"/raça T2. Os isolados foram obtidos de plantas doentes em campos comerciais de tomate para processamento industrial nos estados de Goiás, Minas Gerais, Pernambuco e Bahia, nos anos de 1995 a 1998 e em 2000. Alíquotas de 5 ml de suspensões bacterianas foram depositadas em meio Nutriente-Ágar suplementado com sulfato de cobre, nas concentrações de 50 e 200 µg/ml; sulfato de estreptomicina, a 25 e 200 µg/ml e cloridrato de oxitetraciclina, a 25 µg/ml. Nenhum isolado foi resistente a oxitetraciclina, como também nenhum foi resistente ao cobre na concentração de 200 µg/ml do sulfato de cobre. No entanto, houve diferença entre isolados quanto à sensibilidade ao sulfato de cobre na concentração de 50 µg/ml e ao sulfato de estreptomicina nas duas concentrações empregadas. As freqüências de isolados de X. gardneri, X. axonopodis pv. vesicatoria (grupos "A" e "C" e X. vesicatoria resistentes à estreptomicina (25 µg/ml do produto usado foram, respectivamente, 98%, 38% e 2%, ao passo que, ao cobre, foram, respectivamente, 48%, 4% e 74%. Todos os isolados do grupo "C" foram sensíveis à estreptomicina e 97% sensíveis ao cobre.

  17. Considerações sobre a terceira revolução industrial e a força de trabalho em saúde em Natal Considerations on the third industrial revolution and the health work force in Natal

    Directory of Open Access Journals (Sweden)

    Soraya Maria de Medeiros

    2004-06-01

    Full Text Available A articulação entre modo de produção, políticas sociais e práticas de saúde constitui-se o fio condutor desta investigação: trabalho e trabalhadores em saúde. A Terceira Revolução Industrial desencadeou novas articulações de processos econômicos, políticos e sociais, projetos de sociedade, formas de organização de poder e de atores sociais em proporções mundiais. A conformação definida pela nova divisão mundial do trabalho mantém uma relação de força desigual entre o grupo dos países desenvolvidos e em desenvolvimento. O Brasil também vivencia esse processo de transformação e vem implantando políticas sociais com características do modelo neoliberal. Tais políticas têm causado dificuldades, injustiças e instabilidade social, constituindo desafios aos direitos sociais e desencadeando processos que envolvem os âmbitos público e o privado, em termos organizativos e de subjetividade. Este estudo trata de um recorte de periferia do capitalismo tardio, tendo o Brasil como exemplo, e mais especificamente a região Nordeste.The articulation among production mode, social politics and health practices is established as conducting wire of our inquiry press cutting: the work and the workers in health. The Third Industrial Revolution unchained new articulations with the economical, political and social processes in world-wide ratios, the society projects, forms of organization, power and the social actors. This conformation defined by the new world-wide work division keeps a relation of unequal force between developed countries group and developing countries. Brazil lives this transformation process and has been implanting social politics with the neoliberal model characteristics. Such politcs have been motivating difficulties, injustices and social instability, constituting challenges to the question of the social rights and unchaining processes that involve the public and the private of the Brazilian citizens, in their

  18. Avaliação tecnológica de painéis MDF de madeira de Eucalyptus grandis confeccionados em laboratório e em linha de produção industrial

    Directory of Open Access Journals (Sweden)

    Ugo Leandro Belini

    2010-09-01

    Full Text Available Chapas MDF de fibras da madeira de Eucalyptus grandis foram confeccionadas em laboratório e em linha de produção industrial e determinadas suas propriedades anatômicas, físicas e mecânicas. O desfibramento da madeira provocou o rompimento transversal da parede das fibras. Os painéis MDF obtidos em linha de produção apresentaram menores valores de inchamento e de absorção e melhores propriedades mecânicas para módulo de ruptura, módulo de elasticidade e resistência à tração superficial. Para os painéis MDF confeccionados em laboratório, verificou-se correlação estatisticamente significativa entre módulo de ruptura e de elasticidade, densidade média e resistência à tração perpendicular e inchamento e absorção. Para os painéis MDF confeccionados em linha de produção industrial, verificaram-se as mesmas tendências, sem significância estatística. A avaliação dos parâmetros de qualidade de painéis MDF de eucalipto confeccionados em laboratório e em linha de produção visa a calibrar as variáveis para a obtenção de chapas MDF em pequena escala e melhorar a precisão das análises de rotina de controle de qualidade bem como nas informações apresentadas em publicações científicas.

  19. Controle químico da mancha-bacteriana do tomate para processamento industrial em campo Field chemical control of bacterial spot on tomato for industrial processing

    Directory of Open Access Journals (Sweden)

    Abadia dos R Nascimento

    2013-03-01

    Full Text Available Com o objetivo de avaliar produtos químicos no controle da mancha-bacteriana em tomate para processamento industrial, foram conduzidos dois ensaios na área experimental da Unilever Bestfoods, em Goiânia-GO. No primeiro, o híbrido Heinz 9992 foi inoculado com Xanthomonas perforans em blocos casualizados, com 15 tratamentos e três repetições. O segundo ensaio foi em blocos ao acaso com parcelas subdivididas com três repetições. A parcela principal foi "tratamento químico" (10 tratamentos e a subparcela "híbrido" (Hypeel 108 e U2006. Inoculou-se X. perforans e X. gardneri. Em ambos os ensaios os produtos testados, em diferentes números de aplicações e regimes, foram: acibenzolar-S-metil (ASM; famoxadona + mancozebe; metiram + piraclostrobina; fosfito PK; cloretos de benzalcônio; óxido cuproso e hidróxido de cobre (SC, WP e WG. Em ambos os ensaios, foram avaliados severidade da doença nas folhas, número de frutos com sintomas e produtividade. No segundo ensaio avaliou-se também o número de frutos com escaldadura. No primeiro ensaio foram detectadas diferenças significativas (p>0,05 entre os tratamentos somente nas duas primeiras avaliações de severidade, mas nenhum dos tratamentos diferiu da testemunha. No segundo ensaio, para severidade foliar, foi detectada diferença significativa apenas para os híbridos na primeira avaliação. Para número de frutos com sintomas e escaldadura a interação entre os fatores "tratamento químico" e "híbrido" foi também significativa. Nas folhas, 'U2006' foi mais resistente do que 'Hypeel 108', que apresentou maior incidência de escaldadura, mas nos frutos ocorreu o inverso. Para produtividade, os dois fatores foram significativos. 'U2006' foi mais produtivo do que 'Hypeel 108'. Entre os 10 tratamentos químicos, apesar de nenhum ter diferido da testemunha, famoxadona + mancozebe, que resultou em maior produtividade, diferiu de hidróxido de cobre (WG, ASM - famoxadona + mancozebe e

  20. Estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro = Evolutionary stages of IFAC managerial accounting that prevail in a furniture industrial pole

    Directory of Open Access Journals (Sweden)

    Edson Roberto Macohon

    2016-07-01

    Full Text Available O International Federations of Accountants (IFAC identificou quatro estágios evolutivos da contabilidade gerencial. Este estudo objetiva investigar os estágios evolutivos da contabilidade gerencial que preponderam em um polo industrial moveleiro. Para tal realizou-se pesquisa descritiva a partir de uma survey, tendo como população as 73 indústrias associadas ao Sindicato das Indústrias da Construção e do Mobiliário de São Bento do Sul, SC, Brasil, e uma amostra não-probabilística de 15 indústrias. Os resultados da pesquisa mostram que os artefatos da contabilidade gerencial com mais de 60% de indicações como projeto implantado são: simulações de rentabilidade dos produtos; custo dos produtos pelo custeio por absorção; acompanhamento da evolução dos indicadores não financeiros; índices econômico-financeiros como Return of Investment (ROI; Retorno sobre o Patrimônio Líquido (RSPL e índices de liquidez; redução do custo na fase de projeto de novo produto; planilhas de custos logísticos. Os artefatos que tiveram percentuais acima de 60% de indicações como projetos não implantados são: Custeio Baseado em Atividades (ABC; geração de relatórios por Business Inteligence (BI; Balanced Scorecard (BSC; Economic Value Added (EVA; preço de transferência e Just-in-time (JIT. The International Federations of Accountants (IFAC has identified four stages of progressive managerial accounting. This study aims at investigating the evolutionary stages of managerial accounting that prevail in a furniture industrial pole. For this, a descriptive research was carried out from a survey, having as population 73 industries associated with the Union of Industries and Construction of Furniture of São Bento do Sul, SC, Brazil, and a non-probability sample of 15 industries. The survey results have shown that the artifacts of managerial accounting that got more than 60% of indications, such as project implemented are: simulations of

  1. Análisis de programas de mejora continua. Un estudio longitudinal en una empresa industrial Estudo longitudinal dos resultados da melhora continua em uma empresa industrial

    Directory of Open Access Journals (Sweden)

    Juan A. Marin-Garcia

    2008-12-01

    Full Text Available Las empresas han utilizado diversas herramientas que permiten que los operarios contribuyan al proceso de mejora continua. Entre las herramientas más usadas podemos destacar los sistemas de sugerencias tanto individuales como en grupo. En esta comunicación haremos un repaso de las principales características de ambos sistemas y los modos habituales de implantación. Nuestra ponencia pretende intentar responder a estas preguntas de investigación. ¿Qué resultados se derivan de la implantación de sistemas de sugerencias individuales o en grupo? ¿Cuál de los dos sistemas es más beneficioso para la empresa? ¿Qué problemas surgen durante el funcionamiento de estos programas? Para ello, analizaremos los datos de un caso de empresa industrial donde hemos recogido los datos históricos de 5 años de aplicación de un programa de mejora continua. Ambos programas han demostrado ser provechosos para la empresa, aunque las posibilidades de los sistemas de grupo parecen ser significativamente mayores.As empresas tem utilizado diversas ferramentas que permitem que os operarios comtribuam ao processo de melhora continua. Entre as ferramentas mas usadas podemos destacar os sistemas de sugestoes tanto individual como em grupo. Nesta comunicação faremos um repaso das principais caracteristicas de ambos sistemas e os modos habituais de implantação. Nossa comunicação pretende responder a estas perguntas de pesquisa. Que resultados derivam da implantaçao de sistemas de sugestoes individuais ou em grupo? Qual dos dois sistemas beneficia mais a empresa? Que problemas surgem durante o funcionamento destes programas? Para isso analisaremos os dados de um caso de empresa industrial, onde tiramos os dados historicos de 5 anos de aplicação de um programa melhora continua. Ambos programas demonstraram ser aproveitados para a empresa, ainda que as possibilidades dos sistemas de grupo se mostram significativamente maiores.

  2. Feasibility of cogeneration systems in chemical industry; Viabilidade de sistemas de cogeracao em industria quimica

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Moises Henrique de Andrade; Balestieri, Jose Antonio Perrella [UNESP, Guaratingueta, SP (Brazil). Faculdade de Engenharia

    1998-07-01

    The increasing penetration of natural gas in the Brazilian energetic market, some industries as pulp and paper, chemical and that ones related to the food and beverage processes are some of the ones that are more interested in the cogeneration practice based on the burning of this fossil fuel. An analysis of a photographic chemical industry consumption data revealed that combined cycles and Diesel units were the most suitable for thermal following strategy, considering that the four compression chillers must be maintained, and steam or gas cycles in the case of a complete substitution for absorption chillers and the same strategy. The economic attractiveness was done according to the internal return rate and payback, revealing that the investment can be returned in short time. (author)

  3. Industry

    International Nuclear Information System (INIS)

    Schindler, I.; Wiesenberger, H.

    2001-01-01

    This chapter of the environmental control report deals with the environmental impact of the industry in Austria. It gives a review of the structure and types of the industry, the legal framework and environmental policy of industrial relevance. The environmental situation of the industry in Austria is analyzed in detail, concerning air pollution (SO 2 , NO x , CO 2 , CO, CH 4 , N 2 O, NH 3 , Pb, Cd, Hg, dioxin, furans), waste water, waste management and deposit, energy and water consumption. The state of the art in respect of the IPPC-directives (European Integrated Pollution Prevention and Control Bureau) concerning the best available techniques of the different industry sectors is outlined. The application of European laws and regulations in the Austrian industry is described. (a.n.)

  4. Potes meleiros e colmenas em cerâmica: una tradicâo milenar

    Directory of Open Access Journals (Sweden)

    Rui Morais

    2006-01-01

    Full Text Available Neste estudo apresenta-se uma breve resenha sobre a importância do mel na antiguidade e destaca-se a existência de contentores destinados ao seu armazenamento. Tendo em conta a maior antiguidade destes contentores recolhidos na Península (datáveis, pelo menos, a partir de c. de 600 a.C., a sua persitência ao longo dos tempos, e a existência de paralelos etnográficos ainda hoje documentados, admitimos tratar-se de uma tradicâo com origem da Península.Destaca-se, ainda, a importância dos mellaria na economia do mundo antigo e realça-se a identificacâo de colmeias em cerâmica na regiao de Valência e de uma inédita recolhida em Bracara Augusta, uma cidade romana localizada no extremo ocidente da Península. Por fim, faz-se uma breve alusao à importância do mel em épocas posteriores ao período romano.

  5. Imbalance of tensions in agro-industrial electrical installations; Desequilibrio de tensoes em instalacoes eletricas agroindustriais

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Ricardo Martini; Serni, Paulo Jose Amaral; Rodrigues, Jose Francisco; Porto, Luiz Gonzaga Campos [Universidade Estadual Paulista (UNESP), Bauru SP (Brazil). Fac. de Engenharia. Dept. de Engenharia Eletrica], Emails: martini@feb.unesp.br, martini@feb.unesp.br, paulojas@feb.unesp.br, jfranc@feb.unesp.br, porto@feb.unesp.br

    2006-07-01

    This paper analyzes three-phase industrial agricultural loads operation, under conditions of feeding with unbalanced voltages. Simulations are made in the circuits operating with balanced and unbalanced voltages and the effects in an three-phase induction motor and in an three-phase rectifier are analyzed. The oscillation in steady-state torque in the three-phase induction motor and the generation of triple n harmonics components in the three-phase six pulses rectifier are distinguished as important effects of the operation of these loads with three-phase unbalanced voltages. (author)

  6. Reestruturação industrial, sindicato e território – Alternativas políticas em momentos de crise na região do ABC em São Paulo – Brasil

    Directory of Open Access Journals (Sweden)

    José Ricardo Ramalho

    2012-12-01

    Full Text Available Este texto propõe-se discutir os efeitos sociais e políticos de crises e transformações econômicas sobre a história de distritos industriais, constituídos a partir da concentração de empresas de grande porte e de seus desdobramentos em termos de redes de pequenas e médias empresas. Tomando como exemplo a trajetória do principal distrito industrial brasileiro, consolidado a partir de meados do século xx em uma região que ficou conhecida como ABC, e no contexto de um país em busca de uma vocação manufatureira, pretendemos contribuir para o debate sobre o papel dos territórios e seus atores sociais, em especial os trabalhadores e seus sindicatos, em situações de crise da produção e do emprego, relacionadas à dinâmica das cadeias produtivas em uma economia mundializada.

  7. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  8. Industrialization

    African Journals Online (AJOL)

    Lucy

    scholar, Walt W. Rostow presented and supported this line of thought in his analysis of ... A Brief Historical Background of Industrialization in Africa ... indicative) The western model allowed for the political economy to be shaped by market.

  9. Managing information security in a process industrial environment; Gestao de seguranca da informacao em processos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Raphael Gomes; Aguiar, Leandro Pfleger de [Siemens Company (Brazil)

    2008-07-01

    With the recently globalization expansion (growth), the exploration of energetic resources is crossing over countries boundaries, resulting in worldwide companies exploring Oil and Gas fields available in any place of the world. To the government's bodies, this information about those fields should be treated as a national security interest subject by bringing an adequate management and protection to all the important and critical information and assets, and making possible, at the same time, the freedom and transparency in concurrence processes. This create a complex security context to be managed, where information disruption might, for instance, imply in broke of integrity in public auctions processes as a result of privileged information usage. Furthermore, with the terrorism problem, the process itself becomes an attractive target for different kinds of attacks, motivated by the opportunism to explore the known incapacity of the big industries in well manage their large and complex environments. With all transformations that are happening in productive processes, as the growing TCP/IP protocol usage, the Windows operating systems adoption in SCADA systems and the integration of industrial with business network, are factors that contribute to an eminent landscape of problems. This landscape demonstrates the need from the organizations and countries that are operating in energetic resources exploration, for renew their risk management areas, establishing a unique and integrated process to protect information security infrastructure. This work presents a study of the challenges to be faced by the organizations while rebuilding their internal processes to integrate the risk management and information security areas, as long as a set of essential steps to establish an affective corporative governance of risk management and compliance aspects. Moreover, the work presents the necessary points of the government involvement to improve all the regulatory aspects

  10. Manipulation in Industrialized Meat Products | Manipulação em produtos de carne industrializados

    Directory of Open Access Journals (Sweden)

    Neide Kazue Sakugawa Shinohara

    2017-06-01

    Full Text Available Super and hypermarkets commercialize a wide variety of foods of animal origin and its derivatives, acquired by the population as an important source of proteins. The adoption of Good Manufacturing Practices (GMP in distribution networks and in commercialization represents an important tool to guarantee the quality of food, especially in the segment of processed meat products, due to its perishability. The objective of this study was to evaluate the application of good practices in the manipulation environment of animal products in supermarkets in the Metropolitan Region of Recife (RMR. The methodology used was the quantitative survey and action research during 30 days, with application of checklist regarding the handling and packaging of meat products with employees and managers of eight different companies of the retail network. The most frequently found nonconformities were deficiency in porting and the maintenance of the cold chain, visible microbial deterioration and packaging in unhealthy conditions, which may evolve into food-borne outbreaks. Therefore, it is necessary to constantly monitor BPM through regular training with the manipulators and employees, to ensure the correct execution of the activities and thus to commercialize industrialized meat products safely.

  11. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  12. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  13. A Study of the Strategic Alliance for EMS Industry: The Application of a Hybrid DEA and GM (1, 1 Approach

    Directory of Open Access Journals (Sweden)

    Chia Nan Wang

    2015-01-01

    Full Text Available Choosing a partner is a critical factor for success in international strategic alliances, although criteria for partner selection vary between developed and transitional markets. This study aims to develop effective methods to assist enterprise to measure the firms’ operation efficiency, find out the candidate priority under several different inputs and outputs, and forecast the values of those variables in the future. The methodologies are constructed by the concepts of Data Envelopment Analysis (DEA and grey model (GM. Realistic data in four consecutive years (2009–2012 a total of 20 companies of the Electronic Manufacturing Service (EMS industry that went public are completely collected. This paper tries to help target company—DMU1—to find the right alliance partners. By our proposed approach, the results show the priority in the recent years. The research study is hopefully of interest to managers who are in manufacturing industry in general and EMS enterprises in particular.

  14. A Study of the Strategic Alliance for EMS Industry: The Application of a Hybrid DEA and GM (1, 1) Approach

    Science.gov (United States)

    Wang, Chia Nan; Tran, Thanh Tuyen; Huong, Bui Bich

    2015-01-01

    Choosing a partner is a critical factor for success in international strategic alliances, although criteria for partner selection vary between developed and transitional markets. This study aims to develop effective methods to assist enterprise to measure the firms' operation efficiency, find out the candidate priority under several different inputs and outputs, and forecast the values of those variables in the future. The methodologies are constructed by the concepts of Data Envelopment Analysis (DEA) and grey model (GM). Realistic data in four consecutive years (2009–2012) a total of 20 companies of the Electronic Manufacturing Service (EMS) industry that went public are completely collected. This paper tries to help target company—DMU1—to find the right alliance partners. By our proposed approach, the results show the priority in the recent years. The research study is hopefully of interest to managers who are in manufacturing industry in general and EMS enterprises in particular. PMID:25821859

  15. Reúso de água em indústria de reciclagem de plástico tipo PEAD Water reuse on HDPE plastics recycling pack industry

    Directory of Open Access Journals (Sweden)

    Angela Cristina Orsi Bordonalli

    2009-06-01

    Full Text Available A discussão acerca da viabilidade técnica, econômica e ambiental do reúso da água em processos industriais tem sido uma preocupação constante. Neste trabalho propõe-se uma alternativa simplificada para o tratamento de efluentes com vistas ao seu reúso em uma indústria de reciclagem de plásticos. A água, no presente caso, é componente fundamental para o processo, já que participa como elemento de remoção de detritos e impurezas que contaminam a matriz da matéria-prima utilizada, proveniente, principalmente, de aterros sanitários e lixões. As embalagens plásticas recicladas pela indústria em questão são, em sua grande maioria, de uso doméstico e, em menor escala, frascos contaminados com óleos lubrificantes. Os resultados demonstraram a viabilidade do tratamento através de processo físico-químico por coagulação, floculação, decantação e filtração em manta geotêxtil, com o uso do hidroxicloreto de alumínio (PAC como coagulante, soda cáustica (50% como alcalinizante e polieletrólito como auxiliar de floculação e desidratação do lodo, bem como a exequibilidade do reúso dos efluentes em circuito fechado.The discussion about technical, economical and environmental feasibility of water reuse in industrial process has been a constant concern. This paper purposes a simplified choice for waste water treatment seeking reuse in a plastic recycle industry. The water, in this case, is a prime component because it is the main element for the debris and impurities removal that contaminates the matrix of plastic raw material, which comes, mostly, from landfill and waste disposals. The recycled plastic packages, from the company that had been used for this research, come mostly from domestic use and, in a minor scale, the plastic package contaminated by lubricant oil. The final results show feasible for the treatment through physical-chemical process by coagulation, flocculation, decantation and filtration on geotextile

  16. Automação industrial e sistemas informatizados de gestão da produção em fundições de mercado Industrial automation and computerized production management systems in make-to-order foundries

    Directory of Open Access Journals (Sweden)

    Flavio Cesar F. Fernandes

    2002-12-01

    Full Text Available Fundição é um processo de fabricação que vem crescendo em importância. O principal objetivo deste artigo é analisar, em termos de automação e sistemas informatizados de gestão da produção (SIGP, as fundições de mercado (fundições que produzem sob encomenda um grande número de pedidos vindos, em geral, de um grande número de clientes no interior do Estado de São Paulo pertencentes aos 5 principais pólos (Piracicaba, Indaiatuba, Limeira, São Carlos e Itu com 10 a 250 trabalhadores. Das 61 empresas do interior de São Paulo, 35 situam-se nesses 5 pólos (ou em suas imediações; entrevistamos pessoalmente os diretores industriais e visitamos o chão de fábrica de 30 fundições dentre essas 35. Analisamos quase 200 tabelas de freqüência e de contingência e extraímos várias conclusões, por exemplo: (i entre os três principais problemas e necessidades relativos à produção, dois deles estão diretamente relacionados com a automação industrial e com os SIGP; (ii são coincidentes os interesses em automação e SIGP.Foundry is a manufacturing process with a growing importance. The main objective of this paper is to analyze, in terms of automation and of computerized production management systems (CPMS, the make-to-order foundry in the interior of the state of São Paulo belonging to 5 main foundry industrial districts (Piracicaba, Indaiatuba, Limeira, São Carlos and Itu with 10 to 250 workers. From the 61 enterprises in the interior of São Paulo State, 35 are situated in these 5 industrial districts (or in their neighborhood; we interviewed personally the industrial executive officer and visited the shop-floor of 30 among this 35 foundries. We have analyzed almost 200 frequency and contingency tables and draw several conclusions, for example: (i among the three main problems and necessities related with production, two of them are directly related with automation and CPMS; (ii automation and CPMS generate coincident

  17. Implementação de um programa de responsabilidade social empresarial: um estudo de caso em uma pequena empresa industrial/ Implementation of a program of corporate social responsibility: a case study in a small industrial company

    Directory of Open Access Journals (Sweden)

    Tássia Bastos Sobreira

    2015-02-01

    Full Text Available Este trabalho teve como o objetivo verificar se os indicadores do Instituto Ethos contribuem para analisar práticas sociais e desenvolver programas de responsabilidade social empresarial em empresas de pequeno porte. A estratégia de pesquisa escolhida foi o método de estudo de caso único em uma empresa do setor de tratamento térmico. Na coleta de dados utilizou-se um questionário de acordo com os parâmetros dos Indicadores do Instituto Ethos. Os resultados do programa mostrou que a utilização desses indicadores na avaliação das ações sociais serviu de parâmetro para uma empresa industrial de pequeno porte implementar um programa de responsabilidade social corporativa. Palavras-chave: Responsabilidade social empresarial; Indicadores socioambientais; Gestão socioambiental.

  18. Autopercepcao da saude bucal entre adultos na regiao Nordeste do Brasil

    Directory of Open Access Journals (Sweden)

    Edivania Barbosa do Vale

    2013-12-01

    Full Text Available OBJETIVO: Identificar a autopercepção da saúde bucal por adultos e variáveis associadas. MÉTODOS: Estudo realizado com os dados da Pesquisa Nacional de Saúde Bucal SBBrasil 2010 relativos a 2.456 adultos de 35 a 44 anos da região Nordeste. A variável dependente foi a autopercepção da saúde bucal. As variáveis independentes foram agrupadas em: demográficas, predisposição/facilitação, condição de saúde bucal e relacionadas à autopercepção da necessidade de tratamento. O teste de Rao e Scott foi utilizado para avaliar a associação entre essas variáveis. O efeito das variáveis independentes sobre o desfecho foi avaliado pelo modelo de regressão logística multinominal segundo modelo hierarquizado, em duas etapas: análise simples e análise múltipla hierarquizada. RESULTADOS: A autopercepção positiva da saúde bucal foi observada em 37% dos participantes. No modelo final, as características diretamente associadas a essa autopercepção foram: ser branco, ter renda familiar superior a R$ 500,00, possuir número de bens acima da mediana, ter maior número de dentes hígidos, não apresentar sangramento, não necessitar de prótese, Oral Impacts on Daily Performances = 0, não necessitar de tratamento e ter ido ao dentista há menos de três anos. CONCLUSÕES: Os resultados mostram que a autopercepção da saúde bucal dos adultos residentes no Nordeste brasileiro está diretamente associada a uma estrutura multidimensional de fatores. As baixas condições econômicas associadas às condições clínicas deficientes dessa população causam grande impacto na sua autopercepção da saúde bucal.

  19. Qualidade do palmito da palmeira real em conserva Industrial adaptability of the heart of palm from Archontophoenix alexandrae and A. cunninghamiana

    Directory of Open Access Journals (Sweden)

    Shirley Aparecida Garcia Berbari

    2008-12-01

    Full Text Available A pesquisa teve como objetivo avaliar o aproveitamento industrial e a qualidade do palmito da palmeira Real Australiana (Archontophoenix alexandrae e A. cunninghamiana em comparação aos palmitos das palmeiras Açaí (Euterpe oleracea e Pupunha (Bactris gasipaes. O palmito foi processado como conserva acidificada e pasteurizada e submetido às análises de comprimento e diâmetro dos toletes, peso bruto, líquido e drenado, espaço livre, vácuo, pH, avaliação microbiológica, cor e textura objetivas e avaliação sensorial quanto à cor, aparência, textura, sabor e preferência geral. Os resultados da pesquisa mostraram que o palmito da palmeira Real é adequado para processamento em forma de conserva acidificada e pasteurizada, apresentando características sensoriais semelhantes às das outras variedades. Do ponto de vista da estabilidade ao armazenamento, as análises físico-químicas e microbiológicas mostraram que o palmito da palmeira Real em conserva se apresentou estável durante o período de doze meses de armazenamento. Pode-se afirmar então, que a palmeira Real Australiana apresenta boa qualidade em termos de industrialização na forma de palmito em conserva acidificada e pasteurizada.The objective of this research was to evaluate the industrial adaptability of the heart of palm from Archontophoenix alexandrae e A. cunninghamiana in comparison with "Açaí" (Euterpe oleracea and "Pupunha" (Bactris gasipaes hearts. The heart of palm was canned acidified and pasteurized and analyzed in terms of stems length and diameter, the gross, net and drained weight, headspace; pH; vacuum; microbiological evaluation, objective color and texture and sensorial evaluation of color, appearance, texture, taste and general preference. The results showed that Australian royal palm is adequate for the process of acidified canning and pasteurization since it presented sensorial characteristics similar to other varieties. During 12 months of storage

  20. Pequena empresa e ambiente organizacional externo pela ótica das teorias da organização industrial e da visão baseada em recursos

    OpenAIRE

    Fábio Ângelo Bonassi

    2014-01-01

    Este estudo tem por objetivos analisar as variáveis do Ambiente Organizacional Externo, à luz das Teorias da Organização Industrial e da Visão Baseada em Recursos, reconhecidas pelo dirigente como adequadas à administração estratégica da pequena empresa. As relações das Pequenas Empresas com o Ambiente Organizacional Externo (EOE) é menos investigada proporcionalmente do que os aspectos do dirigente e da estrutura dessas empresas. Não são encontrados portanto estudos sobre pequenas empresas i...

  1. The 10 recommendations for prevention of radiation accidents in industrial gamma radiography; As 10 recomendacoes mais importantes para prevencao de acidentes radiologicos em gamagrafia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Luana Silva de

    2015-07-01

    The Industrial Gamma Radiography, as part of Industrial Radiography, stands out as the most widespread and plays an important role in the quality control of different materials and devices. However, IAEA classifies industrial gamma radiography in the Category 2 as very dangerous due to the radiological risk caused by the use of high activity radioactive sources. In March, 2012, a Brazilian Workshop on Prevention of Industrial Gamma Radiography Accident was performed by DIAPI/CNEN with the objective of disseminating knowledge about radiological accidents with radioactive sources in this application. During this Workshop, IRD/CNEN conducted a survey with 75 participants using a form with 22 recommendations to prevent radiological accidents, aiming to select the most voted. This present work aims to perform a detailed statistical study to define the Top 10 Recommendations for industrial gamma radiography operator avoids radiological accidents and to prepare a brochure with these top 10 recommendations to be distributed to all industrial gamma radiography radiation workers. Data analysis was performed using the statistical method 'Frequency Distribution', among the 75 participants categorized as General, RPO, and Other Workers of the area. The results were obtained for each category, accounting for the total of 22 recommendations in its percentage and number of votes, and the top 10 recommendations were defined to prevent radiological accidents. The first place and most important recommendation is 'Always use a personal alarm monitor throughout the work'. One of the conclusions is that the brochure with the Top 10 Recommendations shows to be understandable and useful for dissemination and training of radiation workers to avoid radiological accidents in industrial gamma radiography. (author)

  2. Debates sobre o tecnobrega e indústria cultural em tempos de pós-fordismo * Debates on tecnobrega: culture industry in times of post-fordism

    Directory of Open Access Journals (Sweden)

    RAQUEL SANT'ANA

    2013-12-01

    Full Text Available Resumo: As últimas décadas do século XX foram marcadas por uma profunda reestruturação produtiva que afetou também a chamada “indústria cultural”. No campo da música, a alegação de que haveria uma crise causada pela circulação de cópias ilegais marcou a reorganização do setor. Neste artigo, analiso o debate em torno do tecnobrega, circuito de música popular que foi transformado em modelo para a indústria fonográfica nacional. Essa construção discursiva contou com participação de imprensa, programas televisivos e análises acadêmicas, que construíram, aos poucos, uma imagem de que o gênero seria a superação da dicotomia centro versus periferia. Esse caso permite pensar algumas das novas configurações da indústria cultural no mundo pós-fordista.Palavras-chave: Tecnobrega – Indústria Fonográfica – Circuitos Musicais. Abstract: The last decades of the Twentieth Century were marked by a profound restructuring process that has also affected the so-called "culture industry". In the music field , the claim that there would be a crisis caused by the circulation of illegal copies marked the sector reorganization. This article analyses the debate on the tecnobrega circuit of popular music which has been transformed into a model for the Brazilian music industry. This discursive construction had debates in the press, television shows and academic analysis, which gradually built an image that such genre would be the breakthrough of the center versus periphery dichotomy. This case allows us to consider some of the new settings of the culture industry in the post-Fordist world.Keywords: Tecnobrega – Phonographic Industry – Music Circuits.

  3. Percepção de saúde e fatores associados em industriários de Santa Catarina, Brasil Self-perceived health and associated factors in industrial workers from Santa Catarina State, Brazil

    Directory of Open Access Journals (Sweden)

    Silvio Aparecido Fonseca

    2008-03-01

    Full Text Available O objetivo foi identificar a prevalência e os fatores associados à percepção negativa de saúde em trabalhadores da indústria no Estado de Santa Catarina, Brasil. Para tanto, foi realizado estudo transversal em amostra representativa de 2.574 sujeitos (62,5% - homens. A percepção negativa de saúde foi o desfecho investigado em relação a variáveis demográficas, sócio-econômicas, perceptivas (estresse e sono e de saúde. Análise de regressão logística multivariável não condicional baseada em modelo hierárquico foi utilizada para explorar associações. A percepção negativa de saúde foi baixa (11,8% e positivamente associada com a faixa etária, atividade física de lazer, percepção da qualidade do sono, percepção do estresse e sexo. Em contrapartida, a renda familiar bruta e o nível de escolaridade associaram-se inversamente ao desfecho. Industriários que exerciam trabalhos de maior demanda física e aqueles classificados nos extremos das categorias do índice de massa corporal (30kg/m² apresentaram maiores prevalências de percepção negativa de saúde. Diferenças significativas de acordo com o estado civil, consumo de bebidas alcoólicas (binge drinking e tabagismo não foram verificadas. Poucas associações foram reveladas para o sexo feminino.The purpose of this study was to determine the prevalence of negative self-perceived health and associated factors among industrial workers in Santa Catarina State, in southern Brazil. A cross-sectional investigation was conducted with a representative sample of 2,574 subjects (62.5% men. Negative self-perceived health (fair or poor was the outcome investigated in association with demographic, socioeconomic, and other health indicators. Multivariate analysis was performed through logistic regression based on a hierarchical model. Negative self-perceived health was exceptional (11.8%, but positively associated with age, leisure physical activity, perceived quality of

  4. Reestruturação urbano-Regional em São Paulo: falácias e fantasias do apocalipse industrial metropolitano

    Directory of Open Access Journals (Sweden)

    Rogério dos Santos Acca

    2003-01-01

    Full Text Available Este artigo busca discutir com a literatura recentemente produzida para dar conta dos padrões de reestruturação urbano-industrial em São Paulo. Entendendo as metrópoles como espaços de produção pós-industrial, a literatura sobre as cidades globais observa uma tendência de crescimento vertiginoso do setor de serviços na esteira da intensificação do papel do capital financeiro como elemento dinâmico basilar de uma nova economia. Assim, as cidades globais centralizariam os grandes conglomerados do setor financeiro que se tornam extremamente dependentes da infra-estrutura, da mão-de-obra altamente especializada e da disponibilidade de informações presentes nos grandes centros urbanos. Nesse sentido, o setor de serviços - dinamizado pelo setor financeiro, basicamente - tenderia a superar a indústria em termos de geração de dinamismo econômico e social nos conglomerados urbanos. Contudo, os padrões recentes da produção metropolitana paulista indicam que a indústria continua sendo o elemento central na dinâmica territorial da RMSP, evidenciando que estamos distantes de um apocalipse da indústria, possibilitado pelo deslocamento dos setores-chave da economia.

  5. Substituição de areia de quartzo por finos de gnaisse em massa cerâmica para telhas: teste industrial Replacing quartz sand for gnaisse fines waste into roofing tile body: industrial test

    Directory of Open Access Journals (Sweden)

    C. M. F. Vieira

    2008-12-01

    Full Text Available Foi avaliado o efeito da substituição de areia por um resíduo de beneficiamento de rocha ornamental, finos de gnaisse, em uma massa de cerâmica vermelha utilizada para fabricação de telhas. Foram preparadas telhas prensadas, do tipo "portuguesa", para queima a 900 ºC em forno industrial. As seguintes propriedades foram determinadas: retração linear, absorção de água e carga de ruptura na flexão. Além disso, avaliaram-se as características das matérias-primas e a plasticidade das composições por meio dos limites de Atterberg. Os resultados indicaram que a utilização de finos de gnaisse em substituição à areia possibilitou uma melhoria na trabalhabilidade/plasticidade da massa cerâmica e acarretou uma pequena redução na absorção de água das telhas. A resistência mecânica não se alterou, dentro da precisão estatística das medidas.The effect of replacing sand for gnaisse sawing waste into a red ceramic body used for roofing tile fabrication was evaluated. Pressed roofing tiles, "portuguese" style, were prepared before firing at 900 ºC in an industrial furnace. The following properties were evaluated: linear shrinkage, water absorption and load rupture strength. The plasticity of the elaborated compositions was determined by the Atterberg limits. The results show that the use of gnaisse fines replacing the sand, improved the workability of the ceramic body and promoted a slight decrease on the water absorption of the roofing tiles. The mechanical strength was not changed within the statistical error.

  6. Vermiculites of the Northeast Brazilian region: comparative analysis; Vermiculitas da regiao do nordeste brasileiro: analise comparativa

    Energy Technology Data Exchange (ETDEWEB)

    Silva, P S; Hanken, R B.L. [Universidade Federal de Campina Grande (UAEMa/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Raposo, C M.O., [Universidade Federal de Campina Grande (UAMG/UFCG), PB (Brazil). Unidade Academica de Mineracao e Geologia

    2009-07-01

    Vermiculites are clay minerals similar to montmorillonites differing for crystalline structures. The product exfoliated is odorless, hydrophobic, not irritate the skin and not the lungs. These properties provide the modified thermally vermiculite a product of broad application in the sectors of construction, agriculture and industry. The aim this work is the comparative analysis between two vermiculites micron fractions from different localities of the northeastern Brazilian region, UBM/PB and EUCATEX/PI. Samples exfoliated to 950 deg C were leached for removal of organic matter by oxidation with hydrogen peroxide. The spectroscopy in the infrared, FTIR and X-ray diffraction, XRD, were used to characterize the samples. Data from X-ray diffraction showed that the structural characteristics of the mineral samples were not significantly altered with the process of leaching and the IR spectra proved the efficiency of procedure for removal of organic impurities (author)

  7. Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Leocadio, Joao Carlos

    2007-03-15

    This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

  8. Failure time series prediction in industrial maintenance using neural networks; Previsao de series temporais de falhas em manutencao industrial usando redes neurais

    Energy Technology Data Exchange (ETDEWEB)

    Torres Junior, Rubiao G.; Machado, Maria Augusta S. [Instituto Brasileiro de Mercado de Capitais (IBMEC), Rio de Janeiro, RJ (Brazil); Souza, Reinaldo C. [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The objective of this work is the application of two failure prediction models in industrial maintenance with the use of Artificial Neural Networks (ANN). A characteristic of the modern industrial environment is a strong competition which leads companies to search for costs minimization methods. Thus, dada gathering and maintenance dada treatment becomes extremely important in this scenario for it aims the equipment and plant systems real repair necessity. Therefore, the objective becomes the widening of the system's full activity in a continuous manner, in the required period, without problems in their integrating parts. A daily time series is modeled based on maintenance interventions pauses dada from a five years period derived form many productive systems in the finalization areas of PETROFLEX Ind. and Com. S.A. Thus, the purpose is to introduce models based on neural networks and verify its system's pauses prediction capacity, so as to intervene with adequate timing before the system fails, extend the operational period and consequently increase its availability. The results obtained in this work demonstrate the employment of Neural Networks in the prediction of pauses in PETROFLEX industrial area maintenance. The ANN's prediction capacity in a group of dada with strong non-linear component where other statistical techniques have shown little efficient has also been confirmed. Discover neural models to predict failure systems time series has enable a breakthrough in the research field, especially due to the market demand. It's no doubt a technique that will evolve in the industrial maintenance area financing important managing decision. Prediction techniques, such as the ones illustrated in this study, work side by side maintenance planning and if carefully implemented and followed up can in the medium run supply a substantial increase in the available operational hours. (author)

  9. Radiological protection procedures for industrial applications of computed radiography; Procedimentos de protecao radiologica em aplicacoes industriais da radiografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Aquino, Josilto Oliveira de

    2009-03-15

    Due to its very particular characteristics, industrial radiography is responsible for roughly half of the relevant accidents in nuclear industry, in developed as well as in developing countries, according to the International Atomic Energy Agency (IAEA). Thus, safety and radiological protection in industrial gamma radiography have been receiving especial treatment by regulatory authorities of most Member States. The main objective of the present work was to evaluate, from the radioprotection point of view, the main advantages of computed radiography (CR) for filmless industrial radiography. In order to accomplish this, both techniques, i.e. conventional and filmless computed radiography were evaluated and compared through practical studies. After the studies performed at the present work it was concluded that computed radiography significantly reduces the inherent doses, reflecting in smaller restricted areas and costs, with consequent improvement in radiological protection and safety. (author)

  10. The impacts of voltage sags in industrial electric systems; Os impactos dos afundamentos de tensao em sistemas eletricos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Maia, Reinaldo Moreira [Moinhos Vera Cruz, Santa Luzia, MG (Brazil); Silva, Selenio Rocha [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil)

    2010-10-15

    The sensitiveness increasing of industrial equipment related to the perturbation of electric grid, resulting in losses to the productive chain, turns the energy quality in the subject more discussed by the electrical community. In this study case on the problems caused by voltage sags to equipment of an industrial plant from the food sector, it is presented the identification process and the adopted solutions. (author)

  11. O efeito da adição de lodo de lavanderia industrial em material cerâmico

    OpenAIRE

    Santos, Camila Fukuda Gomes

    2013-01-01

    Orientador: Dr. Sc. Vsévolod Mymrine Dissertação (mestrado) - Universidade Federal do Paraná, Setor de Tecnologia, Programa de Pós-Graduação em Engenharia e Ciência dos Materiais - PIPE. Defesa: Curitiba, 28/08/2013 Inclui referências Área de concentração: Engenharia e ciência de materiais Resumo: O trabalho é dedicado ao desenvolvimento de um novo método de utilização de lodo de lavanderias industriais na mistura com argila caulinítica. As composições destes materiais foram queim...

  12. Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Leocadio, Joao Carlos

    2007-03-15

    This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

  13. Recommendations for prevention of radiation accident in industrial gammagraphy; Recomendações para prevenção de acidentes radiológicos em gamagrafia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Souza, L.S.; Silva, F.C.A. da [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    Industrial Gammagraphy plays an important role in the quality control of various materials and components. It is classified by the International Atomic Energy Agency - IAEA as Category 2, due to its radiation risk caused by the use of high activity radioactive sources. This risk is based on the harmful consequences of human health, described in some accidents in the world, due to failures. In 2012, the 'Brazilian National Workshop on Accident Prevention in Industrial Gammagraphy' was carried out by DIAPI/CNEN, with the objective of disseminating knowledge about radiation accidents. At the time, the IRD/CNEN-RJ carried out a survey with the 75 participants using a form with 22 recommendations to prevent radiological accidents, in order to select the 10 most voted. A statistical study, using the 'Frequency Distribution' method, was performed to define 10 recommendations. The percentage and vote results were obtained by category of the participants and the 10 most important recommendations were defined to prevent radiation accidents. The recommendation that came in first place was 'Always use an individual monitor with alarm during all work'.

  14. Use of NMR as an online sensor in industrial processes; Uso da RMN como um sensor online em processos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Fabiana Diuk de [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Inst. de Quimica; Colnago, Luiz Alberto, E-mail: colnago@cnpdia.embrapa.br [Embrapa Instrumentacao, Sao Carlos, SP (Brazil)

    2012-07-01

    Nuclear magnetic resonance (NMR) is one of the most versatile analytical techniques for chemical, biochemical and medical applications. Despite this great success, NMR is seldom used as a tool in industrial applications. The first application of NMR in flowing samples was published in 1951. However, only in the last ten years Flow NMR has gained momentum and new and potential applications have been proposed. In this review we present the historical evolution of flow or online NMR spectroscopy and imaging, and current developments for use in the automation of industrial processes. (author)

  15. Reference levels for assays in opened installations of industrial radiography; Niveis de referencia para ensaios em instalacoes abertas de radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Leocadio, Joao C.; Tauhata, Luiz [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil); Crispim, Verginia R. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear

    2001-07-01

    This work had as objectives to analyze the facilities open of industrial x-ray to obtain the distribution of doses in the operators and present proposed for the reference levels. The results of the monitoring revealed an improvement of the radiation protection conditions in the facilities and that the risk of potential exposure was reduced. The advantage of the proposed reference levels is that the supervisors would enlarge the frequency of audits in the facilities opened to accomplish the investigations and interventions.The facilities open with 'bunkers' presented distributions with 95% of the doses below 0,2 mSv and the distributions of the facilities with cordoned area they had 75% of the doses below 0,4 mSv. (author)

  16. Automatic detection of flaws in polymer insulators using 3D industrial tomography; Deteccao automatica de vazios em isoladores polimericos por tomografia industrial 3D

    Energy Technology Data Exchange (ETDEWEB)

    Godoi, Walmor Cardoso; Swinka-Filho, Vitoldo [Instituto de Tecnologia para o Desenvolvimento (LACTEC), Curitiba, PR (Brazil)], Emails: walmor@lactec.org.br, vitoldo@lactec.org.br; Geus, Klaus de [Companhia Paranaense de Energia (Copel), Curitiba, PR (Brazil)], Email: klaus@copel.com; Silva, Romeu Ricardo da [SENAI-RJ Solda (CTS/Solda), Rio de Janeiro, RJ (Brazil). Centro de Tecnologia], Email: rrdsilva@firjan.org.br

    2009-10-15

    This work presents a methodology for the automatic detection of flaws in polymer insulators using three-dimensional industrial computed tomography (CT), as well as results obtained in the context of power distribution networks. The CT slices were reconstructed using 180 digital radiographs (projections) acquired by a high resolution system (pixel dimension of 50 {mu}m x 50 {mu}m, a-Si). For the reconstruction of 3D CT, 50 {mu}m wide bit map slices were used. The Marching Cubes algorithm was used to perform the 3D reconstruction, using the Visualization Tool kit (VTK) library and the Java programming language (64 Bits Linux platform). Nine features were obtained from the reconstructed three-dimensional objects for the neural networks training. Results showed to be satisfactory. (author)

  17. Alinhamento e maturidade na gerência de TI em segmento tradicional da indústria: o setor sucroalcooleiro / Alignment and maturity in IT management in industry traditional segment: the sugarcane industry

    Directory of Open Access Journals (Sweden)

    João Paulo de Medeiros Neto

    2013-05-01

    Full Text Available O objetivo do estudo foi analisar o setor sucroalcooleiro da Região Nordeste com a intenção de identificar variáveis que descrevam o processo de alinhamento, se houver, entre estratégias de negócio e estratégias de TI. Buscou-se suprir uma lacuna existente na Literatura, onde a maioria das investigações sobre alinhamento no país tem privilegiado ramos mais dinâmicos, com especial ênfase ao segmento bancário, onde a relação entre investimentos em TI e produtividade é mais evidente. A pesquisa está fundamentada em trabalhos recentes sobre avaliação dos benefícios do desenvolvimento tecnológico, como os recursos aplicados em TIC, que proporcionam suporte às empresas conferindo-lhes (ou não competitividade (paradoxo da produtividade. Para isso, foi aplicado um questionário, além de realizadas entrevistas, para aprofundamento de alguns pontos, junto aos gerentes de áreas estratégicas em 14 usinas do setor sucroalcooleiro em Pernambuco (total de 19, referenciadas pelo modelo de alinhamento de Henderson e Venkatraman (1993, referendado por Albertin (2009 e, também, pela análise da maturidade desse alinhamento, definida por Luftman (2000. O alinhamento estratégico ficou caracterizado com um grupo identificado como moderno, que pratica a utilização da TI com maior intensidade, e um grupo mais tradicional, que se preocupa com a TI, porém de maneira menos ativa. No processo de alinhamento, ficou evidenciada a importância de uma equipe de gerentes proficiente que seesmera em dialogar, buscando soluções de TI em sintonia com as estratégias de negócio da firma. Como extensão do estudo, é sugerida uma pesquisa que inclua o mercado sucroalcooleiro nacional ao universo de investigação.The aim of this study was to analyze the sugarcane industry of the northeast with the intention of identifying variables that describe the alignment process, if any, between business strategies and IT strategies. It sought to fill a gap in

  18. Situação das indústrias madeireiras do Estado do Amazonas em 2000 Lumber industries situation in 2000 in Amazonas State

    Directory of Open Access Journals (Sweden)

    José Ricardo Araújo Lima

    2005-06-01

    Full Text Available Apesar da baixa atividade de usos do solo no Estado, a produção de madeira não é sustentável. Isso é causado, principalmente, pela falta de infra-estrutura dos órgãos responsáveis para monitorar os planos de manejo florestal e de corte raso para agricultura e pecuária. Este estudo apresenta análise de alguns fatores de produção, industrialização e comercialização da indústria madeireira do Estado do Amazonas, visando viabilizar diagnóstico do setor florestal. Essas informações possibilitam o estabelecimento de políticas florestais para a região. Fez-se a definição das zonas de produção, onde os principais municípios produtores de serrados foram Manaus, Itacoatiara, Manacapuru e Parintins; e de compensados e laminados foram Manaus e Itacoatiara. Após essa definição os dados foram coletados diretamente nas indústrias, através de questionários e entrevistas para coletar as seguintes informações: principais espécies consumidas, produtividade das indústrias, origem da matéria-prima, transporte, qualificação de pessoal e treinamento, principais problemas tecnológicos e exportação. Em 2000, a produção estadual foi de 323.400m³ de madeira em toras. Mais de 50 espécies diferentes são usadas nas serrarias, das quais 16 representaram 80% do volume total, sendo as 5 espécies (louro inhamui,angelim pedra,amapá,assacu e maçaranduba contribuíram com 49,34% do consumo total; quanto as indústrias de compensado e laminado estas usaram, 17 espécies onde as 5 principais (muiratinga, sumaúma, copaíba, assacu e amapá representaram 62,71% do consumo total.Também foram coletados dados complementares junto ao IBAMA, SUFRAMA, SEFAZ e IBGE.Despite low land activities, hardwood production is not sustainable. This is caused mainly by the lack of infrastructure on the part of the responsible organs that monitor forest management plans and clear cutting for pasture and agriculture. This study dealt with forest

  19. Fungos emboloradores e manchadores de madeira em toras estocadas em indústrias madeireiras no município de Manaus, Amazonas, Brasil Mould and stain fungi in logs stored in wood industries of Manaus, Amazonas, Brazil

    Directory of Open Access Journals (Sweden)

    Rogério Eiji Hanada

    2003-01-01

    Full Text Available Visando conhecer a diversidade e a incidência de fungos emboloradores e manchadores de madeira da região Amazônica, foi realizado um levantamento em 12 espécies florestais, estocadas em quatro indústrias madeireiras de Manaus. De cada espécie florestal selecionaram-se cinco toras, das quais retiraram-se amostras de onde procedeu-se isolamento dos fungos. Foram isolados 106 fungos associados às essências florestais, representados por nove gêneros e por dezesseis espécies. Paecilomyces variotii e Lasiodiplodia theobromae foram as espécies fúngicas mais freqüentemente associadas às espécies florestais. Ceiba pentandra e Hura crepitans foram as essências florestais que apresentaram maior diversidade de fungos, com sete espécies cada uma. Hymeneae courbaril foi a que apresentou menor diversidade de fungo, com apenas uma espécie.In order to know a diversity and incidence of wood mould and wood stain fungi from Amazonian wood, the survey and identification of these kinds of fungi were carried out in twelve wood species from four wood industries of Manaus, Amazonas. Five logs were randomly selected. Wood samples were prepared and transported to the Wood Pathology Laboratory at the Forest Product Research Center of the National Institute for Amazonian Research, where the isolation and identification of the fungi were conducted. One hundred and six fungi associated to the wood species were isolated, represented by nine genera and sixteen fungi species. Paecilomyces variotti and Lasiodiplodia theobromae were the more representative fungi, associated with ten and seven wood species respectively. Ceiba pentandra e Hura crepitans were the wood species with highest diversity of fungi, with seven species each. Hymenae courbaril was the wood that presented the lowest diversity of fungi, with only one fungus.

  20. Efeito da densidade e proporção de plantas de tomate industrial e de maria-pretinha em competição Density and proportion effects of industrial tomato and nightshade plants under competition

    Directory of Open Access Journals (Sweden)

    D.D. Hernandez

    2002-08-01

    Full Text Available O presente trabalho foi realizado com o objetivo de quantificar as interações competitivas e os índices de competitividade entre plantas de tomate industrial (Lycopersicon esculentum cv. Heinz 9553 e maria-pretinha (Solanum americanum. Usou-se como método um experimento substitutivo, com densidade total de 40 plantas m-2 e 11 proporções, além das monoculturas em densidades, que variaram de 20 a 100 plantas m-2, em intervalos de 20 plantas, conduzidos no delineamento de blocos casualizados com três repetições. Os resultados obtidos foram analisados pelo método convencional de análise de experimentos substitutivos e pela produção recíproca total. A maria-pretinha mostrou ser um competidor mais agressivo que o tomate, sendo mais importante a competição interespecífica para a planta cultivada. Para a biomassa seca total, as duas espécies não competiram pelos mesmos fatores de crescimento. Já para a área foliar, as duas espécies se mostraram competidoras pelos mesmos fatores de crescimento, mostrando ser essa a característica mais sensível à interferência.This work aimed to quantify the competitive interactions and the competitiveness indexes among plants of industrial tomato (Lycopersicon esculentum cv. Heinz 9553 and nightshade (Solanum americanum. The methodology used was a replacement series experiment with a total density of 40 plants m-2 and 11 proportions, besides the monocultures in densities varying from 20 to 100 plants m-2, in intervals of 20 plants, conducted in a randomized complete block design with three replications. The results were analyzed by the conventional method of analysis of replacement series experiment and for total reciprocal production. The nightshade plant was shown to be a more aggressive competitor than the tomato, with inter-specific competition being more important for the cultivated plant. For the dry aboveground biomasses, the two species did not compete for the same natural resources

  1. Rationalization of motive power use in animal feed industry; Racionalizacao do uso de forca motriz em fabrica de racao

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Carlos A.; Oliveira Filho, Delly; Lacerda Filho, Adilio F. de; Martins, Jose H. [Vicosa Univ., MG (Brazil). Dept. de Engenharia Agricola]. E-mails: carlos, delly, alacerda, jmartins@vicosa.ufv.br

    2005-05-15

    The lack of investment in the energy sector, allied to the seasoning of natural resources necessity for the generation of hydroelectric energy, makes the rationalization of the use of electric energy an indispensable tool for country growth in an harmonic manner. The animal feed can represent around 70 to 80% of the total cost for running an animal feed production facility. So, it is important to study the energy management in processes that mainly use motive power, such as the animal feed factories. In the animal feed factory studied, the electric motors are used mainly for milling and mixture granulated and transportation. The objective of this paper is to manage the use of electric energy, by matching motive power at the Pif Paf animal feed industry to the load needs. The average electric motors load index was 48.6%, indicating a likelihood of economy. The potential economy with electric energy using the best options of motive power was about R$ 24,426.50 per year (23.9%). To achieve this goal it is also necessary: to adjust relays and to choose fuses, to schedule operation and to build storage facilities. (author)

  2. Gastric and colorectal cancer mortality in an urban and industrialized area of Brazil Mortalidade por cânceres gástrico e colorretal em uma área urbana-industrial do Brasil

    Directory of Open Access Journals (Sweden)

    Marcilia de Araujo Medrado-Faria

    2001-04-01

    and genetic susceptibility.OBJETIVO: Estudar a mortalidade por cânceres gástrico e colorretal na Baixada Santista, região Sudeste do Brasil, onde situa-se importante complexo urbano-industrial. MÉTODO: Dos registros da Fundação Sistema Estadual de Análise de Dados (SEADE, obteve-se 1105 óbitos por câncer gástrico (CID 153-154 e 690 por câncer colorretal (CID 151, ocorridos em homens acima dos dez anos, residentes na Baixada Santista no período de 1980 a 1993, que encontram-se distribuídos entre os quatro municípios vinculados ao complexo industrial-portuário (área industrializada e os quatro municípios situados fora dele (área não industrializada. Para cada câncer e para as áreas foram calculadas as taxas de mortalidade, padronizadas pela população mundial de 1960. Calculou-se então as razões entre essas taxas nos períodos de 1980-93, 1980-86 e 1987-93. RESULTADOS: As taxas de mortalidade para o câncer colorretal foram significantemente mais altas na área industrializada com razões de 1,6 [IC 1,22 -- 2,29], 1,6 [IC 1,2 -- 2,0] e 1,6 [IC 1,3 -- 2,0], respectivamente nos períodos de 1980-86, 1987-93 e 1980-93. O câncer gástrico não apresentou diferença entre as áreas industrializadas e não industrializadas, mas decresceu significantemente na Baixada Santista entre os períodos de 1980-86 e 1987-93. CONCLUSÕES: O excesso de mortalidade por câncer colorretal na área industrializada pode estar relacionado com a exposição a numerosos carcinogênicos orgânicos (hidrocarbonetos aromáticos e alifáticos clorados e metais (cádmio, cromo e níquel presentes na região. A diferença não significante para o câncer gástrico entre as duas áreas e o decréscimo nos últimos anos estaria refletindo predominantemente os avanços na qualidade de vida nas áreas urbanas. Esses resultados demandam a realização de estudos caso-controle para analisar as associações entre esses cânceres e os fatores ambientais (ocupacionais, urbano

  3. Analysis of energetic efficiency in stenters of textile industry; Analise de eficiencia energetica em ramas de industria textil

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Antonio Rogerio; Ferraz, Andre; Rocha, Ivan; Azevedo, Jorge; Oshiro, Hugo K.; Konishi, Ricardo; Piazza, Walter; Lehmkuhl, Willian [Companhia de Gas de Santa Catarina (SCGAS), Florianopolis, SC (Brazil)

    2011-12-21

    This paper presents the research on the use of alternative energy within the textile industry: a strategy aimed at reducing costs and securing market share. The use of natural gas allows for the direct heating and drying of textiles through convection, instead of the conventional indirect heating method of thermal fluids. This measure alone reduces significantly the energy costs and grants the process superior efficiency and sustainability. This case examines the improvements to the process of drying textiles through thermal equipment called stenters, whose purpose is to remove humidity from the cloth during its fabrication. As such, SCGAS, in association with FURB, has performed an operational and technological evaluation of the drying process used by a customer enterprise. The data collected enabled the researchers to map all sources (inputs and outputs) of mass and energy for each different stenter. This composed the basis for the analysis done and the subsequent proposal of improvements, which varied from the conversion of stenter from indirect to direct heating and the development of even more energy efficient solutions for the direct heating system. The data obtained shows that, for the indirect heating system, 28% of the thermal energy produced could be recovered, given the temperature of the exhaust gases reached 360 deg C. The indirect heating stenters presented energy efficiency between 24% and 27%, whiles the direct heating ones presented between 27,4% and 34,8%. Additionally, if an automated control system for the natural gas and oxidizing air flows was to be installed, it would guarantee greater quality combustion with a significant increase in energy efficiency, as well as a decrease in carbon monoxide emissions by a factor of eight. (author)

  4. Práticas de gestão no desenvolvimento de produtos em empresas de autopeças Management practices in product development in autoparts industry

    Directory of Open Access Journals (Sweden)

    José Carlos de Toledo

    2008-01-01

    , além de técnicas de simulação do produto em desenvolvimento; e é esperado que as unidades locais consigam mais autonomia em relação às matrizes, particularmente para condução das atividades que possuem competência para participar mais efetivamente de desenvolvimentos conjuntos com as montadoras e/ou sistemistas, seja para fornecimento local ou mais global.This paper presents the empirical findings of survey on practices and management trends of product development process management in the Brazilian auto-parts industry. Thirty two companies, from 120 companies which carry out product development activities, answered the questionnaire, each of theses 32 companies was visited and the interviews were conduced with the managers of PDP, by members of the group of researchers. The final sample consisted of 23 responses since 9 questionnaires were incomplete. Some of the main findings on the practices are: widespread dissemination and use of reference models for PDP partially implemented; methods and techniques for PDP Management are applied with weak inter functional integration; development team carries out the PDP activities; functional structure is still widely used; the follow-source projects are the most common type, while platform projects were also identified (average of 25% of carry out projects; and the first tier suppliers are the ones that more use practices of international pattern of PDP management. Regarding the trends, the reduction of the innovation cycle will require more resources to increase product development speed, and local units expect to reach more autonomy in product development activities which they are capable in order to take part effectively of co-development with the automakers.

  5. Modelo para a gestão da cultura de segurança do trabalho em organizações industriais Model for safety culture management in industrial organizations

    Directory of Open Access Journals (Sweden)

    Anastácio Pinto Gonçalves Filho

    2012-01-01

    Full Text Available A pesquisa apresentada neste artigo teve o objetivo de desenvolver e validar um modelo para identificar o estágio de maturidade da cultura de segurança do trabalho em organizações industriais. Com a finalidade de validá-lo, o modelo desenvolvido foi aplicado em 23 empresas químicas e petroquímicas do Polo Industrial de Camaçari, Bahia, Brasil. Foram utilizados os seguintes métodos para validação do modelo desenvolvido: 1 entrevistas individuais, 2 evidências documentais, 3 entrevistas com grupo de gerentes e 4 aplicação do modelo em outro ramo de atividade diferente do ramo químico e petroquímico. O principal resultado obtido foi que o modelo desenvolvido foi validado e pode ser utilizado para identificar o estágio de maturidade da cultura de segurança em organizações industriais.The research presented in this article had the objective to develop and validate a model to identify safety culture maturity in industrial organizations. In order to validate it, the developed model was applied in 23 chemical and petrochemical companies in Camaçari, Bahia, Brazil. The following methods were used: 1. individual interviews; 2. interview with groups of safety managers; 3. documental evidence and 4. application of the model in another industrial activity. Results demonstrated that the developed model was validated and it is suitable to identify safety culture maturity in industrial organizations.

  6. Statistical analysis of the potassium concentration obtained through; Analise estatistica da concentracao de potassio obtida por aerolevantamentos geofisicos em diferentes formacoes geologicas na regiao de Santa Maria, RS

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Joao Eduardo da Silva [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Dept. de Estatistica]. E-mail: jesp61@gmail.com; Silva, Jose Luiz Silverio da; Pires, Carlos Alberto da Fonseca [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Lab. de Hidrogeologia; Strieder, Adelir Jose [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Lab. de Modelagem Geologica e Ambiental

    2007-07-01

    The present work was developed in outcrops of Santa Maria region, southern Brazil, Rio Grande do Sul State. Statistic evaluations were applied in different rock types. The possibility to distinguish different geologic units, sedimentary and volcanic (acid and basic types) by means of the statistic analyses from the use of airborne gamma-ray spectrometry integrating potash radiation emissions data with geological and geochemistry data is discussed. This Project was carried out at 1973 by Geological Survey of Brazil/Companhia de Pesquisas de Recursos Minerais. The Camaqua Project evaluated the behavior of potash concentrations generating XYZ Geosof 1997 format, one grid, thematic map and digital thematic map files from this total area. Using these data base, the integration of statistics analyses in sedimentary formations which belong to the Depressao Central do Rio Grande do Sul and/or to volcanic rocks from Planalto da Serra Geral at the border of Parana Basin was tested. Univariate statistics model was used: the media, the standard media error, and the trust limits were estimated. The Tukey's Test was used in order to compare mean values. The results allowed to create criteria to distinguish geological formations based on their potash content. The back-calibration technique was employed to transform K radiation to percentage. Inside this context it was possible to define characteristic values from radioactive potash emissions and their trust ranges in relation to geologic formations. The potash variable when evaluated in relation to geographic Universal Transverse Mercator coordinates system showed a spatial relation following one polynomial model of second order, with one determination coefficient. The statistica 7.1 software Generalist Linear Models produced by Statistics Department of Federal University of Santa Maria/Brazil was used. (author)

  7. Polyphenol oxidase and peroxidase in different sugarcane cultivars, in Presidente Prudente region; Polifenoloxidases e peroxidase em diferentes variedades de cana-de-acucar na regiao de Presidente Prudente

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Tadeu A.; Gomes, Danilo B.; Marques, Patricia A.A.; Alves, Vagner C. [Universidade do Oeste Paulista (UNOESTE), Presidente Prudente, SP (Brazil). Curso de Agronomia], Emails: tmarques@unoeste.br, pmarques@unoeste.br, vagner@unoeste.br

    2009-07-01

    The objective in present work was compare three sugarcane cultivars (RB 72-454, RB 86-7515, IAC 86-2480), evaluating the content of polyphenoloxidase and peroxidase. These determinations had aimed at to detect possible differences between varieties thus and being to differentiate them with regard to the products most interesting to be elaborated, ethanol production or sugar production. The varieties had presented differences of behavior for studied enzymes. The activity of polyphenoloxidase was superior the activity of peroxidase. The enzyme peroxidase was presented in bigger indices in the dry and cold periods. The enzyme polyphenoloxidase was presented well changeable, but with strong trend of bigger values in the rainy periods. It can be said that distinct periods for the best use of the varieties in the sugar production or alcohol exist. (author)

  8. Quality assessment of radiopharmaceuticals in nuclear medicine services at Northeast states, Brazil; Avaliacao da qualidade de radiofarmacos em servicos de medicina nuclear de estados da regiao nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Wellington Gomes de

    2012-07-01

    The radiopharmaceuticals are used in the field nuclear medicine services (NMS) as tracer in the diagnoses and treatment of many diseases. Radiopharmaceuticals used in nuclear medicine and usually have a minimum of pharmacological effect. The procedures for labelling Radiopharmaceuticals should be observed in order to minimize risks to patients, employees and individuals from the public, and to be administered in humans, must be sterile and free of pyrogens and possess elements all measures of quality controls required a conventional drug. The 'Agencia Nacional de Vigilancia Sanitaria (ANVISA)' in its 'Resolucao de Diretoria Colegiada' (RDC) No. 38 of June 4{sup th} 2008, decided that the NMS must perform quality control in the generators eluate and radiopharmaceuticals according to recommendations of manufacturers and scientific evidence accepted by ANVISA. Thus, this study proposes to evaluate the quality of the generator {sup 99M}o-{sup 99m}Tc eluate and radiopharmaceuticals labeled with {sup 99m}Tc used in most NMS of some states in the Northeast, in relation to radionuclide, chemical, radiochemical purity and pH and promote the inclusion of procedure for quality control of radiopharmaceuticals in routine NMS. The results show that 90% radionuclidic purity, 98.2% purity chemical and radiochemical purity of 46% and 100% of the eluates are in agreement with international pharmacopoeias; already radiopharmaceuticals showed 82.6% purity and all radiochemical pH values are also in accordance with international pharmacopoeias. Even with so many positive results, staff the majority of MNS was not able to perform the quality control of the eluates and radiopharmaceuticals. Showing the importance of implementing of quality control programs of the eluates and radiopharmaceuticals in nuclear medicine. (author)

  9. Determination of Ra natural isotopes in marine samples from Itamaraca coastal regions; Determinacao de isotopos naturais de Ra em amostras costeiras da regiao de Itamaraca (PE)

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Patricia B.; Valentim, Eliane; Lima, Ricardo A. [Centro Regional de Ciencias Nucleares (CRCN), Recife, PE (Brazil)]. E-mail: pbrandao@cnen.gov.br; Medeiros, Carmem [Pernambuco Univ., Recife, PE (Brazil). Dept. de Oceanografia; Oliveira, Joselene [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    2005-07-01

    Groundwater plays an important role in the transport of nutrients and pollutants to the coastal marine environment s and other surfaces water. Concentrations of {sup 223}Ra, {sup 224}Ra and {sup 226}Ra in marine water of the Itamaraca coastal region, PE, were measured during the winter of 2004, aiming to investigate the presence of radionuclides as a tracer of submarine groundwater discharges (SGD) in the environment studied. Measurements of temperature, salinity and nutrients were also carried out. (author)

  10. Quality assessment of radiopharmaceuticals in nuclear medicine services at Northeast states, Brazil; Avaliacao da qualidade de radiofarmacos em servicos de medicina nuclear de estados da regiao nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Wellington Gomes de

    2012-07-01

    The radiopharmaceuticals are used in the field nuclear medicine services (NMS) as tracer in the diagnoses and treatment of many diseases. Radiopharmaceuticals used in nuclear medicine and usually have a minimum of pharmacological effect. The procedures for labelling Radiopharmaceuticals should be observed in order to minimize risks to patients, employees and individuals from the public, and to be administered in humans, must be sterile and free of pyrogens and possess elements all measures of quality controls required a conventional drug. The 'Agencia Nacional de Vigilancia Sanitaria (ANVISA)' in its 'Resolucao de Diretoria Colegiada' (RDC) No. 38 of June 4{sup th} 2008, decided that the NMS must perform quality control in the generators eluate and radiopharmaceuticals according to recommendations of manufacturers and scientific evidence accepted by ANVISA. Thus, this study proposes to evaluate the quality of the generator {sup 99M}o-{sup 99m}Tc eluate and radiopharmaceuticals labeled with {sup 99m}Tc used in most NMS of some states in the Northeast, in relation to radionuclide, chemical, radiochemical purity and pH and promote the inclusion of procedure for quality control of radiopharmaceuticals in routine NMS. The results show that 90% radionuclidic purity, 98.2% purity chemical and radiochemical purity of 46% and 100% of the eluates are in agreement with international pharmacopoeias; already radiopharmaceuticals showed 82.6% purity and all radiochemical pH values are also in accordance with international pharmacopoeias. Even with so many positive results, staff the majority of MNS was not able to perform the quality control of the eluates and radiopharmaceuticals. Showing the importance of implementing of quality control programs of the eluates and radiopharmaceuticals in nuclear medicine. (author)

  11. Repetibilidade de características agroindustriais em cana-de-açúcar Repeatability of agro-industrial characteristics in sugar cane

    Directory of Open Access Journals (Sweden)

    Maria Silvia Monteiro dos Santos

    2004-04-01

    Full Text Available Os objetivos deste trabalho foram estabelecer estimativas de repetibilidade de características agroindustriais em 20 genótipos de cana-de-açúcar, determinar a previsibilidade de cada caráter e indicar a predição do valor verdadeiro de cada clone. O delineamento utilizado foi blocos casualizados, com cinco repetições. Utilizaram-se a análise de variância com dois fatores de variação (cortes e genótipos e a análise dos componentes principais para estimar o coeficiente de repetibilidade , a partir de três cortes. Foram obtidas estimativas de repetibilidade acima de 0,5 para fibra e toneladas de cana por hectare, em ambos os métodos, com confiabilidade maior que 84% pelo método dos componentes principais. As características que ficaram abaixo de 0,5, com previsibilidade inferior a 74%, necessitam de um maior número de avaliações. Os métodos dos componentes principais e análise de variância indicaram, em cinco cortes, uma previsibilidade maior que 80% para fibra, porcentagem de pol (sacarose no caldo da cana, toneladas de cana por hectare e toneladas de pol no caldo da cana por hectare, embora o primeiro tenha sido mais eficiente. Considerando toneladas de cana por hectare e toneladas de pol no caldo da cana por hectare, os clones RB9371, RB9350 e RB9364 são os melhores.The objectives of this work were to establish repeatability estimates for agro-industrial characteristics for twenty genotypes of sugar cane, to indicate the determination coefficient of each character and the prediction of truthful value of each clone. The design consisted of randomized blocks, with five replications. The analysis of variance with two factors of variation (cuts and genotypes and the analysis of the main components were used to estimate the repeatability coefficient , initiating with three cuts. Estimates of repeatability were obtained over 0.5 for fiber and ton of cane per hectare, in both methods, with confidence over 84% by the method of

  12. Avaliação da capacidade de regeneração in vitro em tomateiro industrial Evaluation of the in vitro regeneration capacity in Brazilian industrial tomato

    Directory of Open Access Journals (Sweden)

    MIKLÓS FÁRI

    2000-08-01

    Full Text Available Este trabalho teve por objetivo avaliar a capacidade de regeneração das cultivares de tomateiro industrial (Lycopersicon esculentum Mill IPA-5 e IPA-6, utilizando quatro composições de meio de cultura descritos na literatura e cinco variações de inoculação. Foi testada uma nova variação de inoculação, denominada cotilédone fendido. A maior freqüência de formação de gemas vegetativas foi 100% no caso de IPA-5, e 65% no caso de IPA-6. Para induzir o alongamento de brotos, foram necessários três subcultivos dos explantes apresentando gemas. No caso de IPA-5, o número de brotos obtidos foi maior quando a indução de gemas foi realizada em meio contendo BAP (2,5 mg L-1 e AIA (0,2 mg L-1 seguido de três subcultivos, em meio como zeatina (0,5 mg L-1. Usando esse protocolo, a cultivar IPA-5 produziu uma média de 5,45 brotos alongados a partir do cotilédone fendido. Essa capacidade excedeu significativamente o cotilédone aparado, que produziu 4,4 brotos alongados por explante. No caso de IPA-6, a melhor combinação de meios e método de inoculação produziu 0,87 broto alongado por explante. Os brotos alongados foram enraizados e transferidos para casa de vegetação.The objective of this work was to evaluate the regeneration capacity of the IPA-5 and IPA-6 Brazilian industrial tomato (Lycopersicon esculentum Mill cultivars using four compositions of culture media described in the literature and five inoculation methods. A new variation of inoculation, the split cotyledon method, was also tested. The largest frequency of shoot bud formation was 100% in the case of IPA-5 and 65% in the case of IPA-6. To induce shoot elongation, it was necessary to accomplish three subcultures of the explants presenting shoot buds. In the case of IPA-5, the number of the obtained shoots was higher when the induction of shoot buds was accomplished in culture medium containing BAP (2.5 mg L-1 and IAA (0.2 mg L-1 followed by three subcultures on

  13. Consumo de alcohol en trabajadores de una industria en Monterrey, México Consumo de álcool em trabalhadores de uma indústria em Monterrey, México Alcohol consumption among industrial workers in Monterrey , Mexico

    Directory of Open Access Journals (Sweden)

    Teresita de Jesús Campa Magallón

    2005-10-01

    Full Text Available El objectivo fue describir el consumo de alcohol en 129 trabajadores de una industria. La recolección de datos se realizó a través de los cuestionarios AUDIT y CECA. El mayor consumo fue en operarios masculinos con 31 años de edad, 9,8 años de escolaridad, 5 años de antigüedad laboral, casados, con consumo de 3 a 4 bebidas por ocasión (38,5%. Un consumo de 6 copas o más al mês se presentó en 32,7% de los operarios. La frecuencia de consumo mensual fue de 2 o 4 veces. 46,5% fueron considerados dependientes. Ocurrieron daños en 55% de los operarios y empleados. Los empleados refirieron consumo de alcohol en reuniones sociales con compañeros (63,6%. Los consecuencies del consumo fueron: cansancio físico (44,2%, problemas físicos (29,5%, disminución de rendimiento laboral (29,5% y la disminución de reflejos (21,7%. Delante del mayor consumo de alcohol, los trabajdores perciben menores consecuencias respecto a este consumo. Los que refirieron el no consumo se encontraban en la etapa de precontemplación.O objetivo foi descrever o consumo de álcool entre 129 trabalhadores de uma indústria. A coleta de dados foi realizada a través dos instrumentos AUDIT e CECA. A maior porcentagem de consumo foi em operários masculinos de 31 anos, escolaridade de 9,8 anos, tempo de trabalho 5 anos, casados. Identificou-se um consumo de 3 a 4 bebidas por ocasião (38,5%. Obteve-se o consumo de 6 copos ou mais por mês em 32,7% dos operários. A freqüência de consumo mensal foi de 2 ou 4 vezes, a dependência correspondeu a 46,5% e a ocorrência de danos a 55% dos operários e empregados. Os trabalhadores informaram consumo de álcool em encontros sociais com amigos (63,6%. As conseqüências desse consumo foram: cansaço físico (44,2%, problemas físicos (29,5%, diminuição do rendimento de trabalho (29,5% e diminuição de reflexos (21,7%. Diante de um maior consumo de álcool, os trabalhadores percebem menores conseqüências em relação a

  14. Consumo de alcool e risco para doenca coronariana na regiao metropolitana de Sao Paulo: uma analise do Projeto GENACIS

    Directory of Open Access Journals (Sweden)

    Maria Cristina Pereira Lima

    2013-03-01

    Full Text Available OBJETIVOS: Examinar a associação entre consumo de álcool e risco para doença coronariana em amostra populacional. MÉTODOS: Estudo transversal, de base populacional, conduzido de janeiro/2006 a junho/2007, na região metropolitana de São Paulo, como parte do estudo internacional (Gender, Alcohol, and Culture: an International Study. Os sujeitos (1.501, sendo 609 homens e 892 mulheres eram residentes da região metropolitana de São Paulo, tinham 30 anos ou mais de idade e foram selecionados aleatoriamente, a partir de amostragem complexa por conglomerados. Todos os indivíduos consentiram em participar da pesquisa. A variável dependente foi risco cardíaco avaliado através do WHO Rose Angina Questionnaire. A análise multivariada consistiu em regressão logística, tendo sido realizado ajuste para uso de tabaco e índice de massa corpórea. RESULTADOS: A taxa de resposta foi 75%. Ser mulher, ter mais idade, ser negro, fumante e ter um índice de massa corpórea elevado, foram associados a maior risco para doença coronariana. Indivíduos que nunca beberam na vida (OR = 2,22 e ex-bebedores (OR = 2,42 tiveram maior risco de doença cardíaca do que aqueles que informaram beber até 19 g de álcool por dia, sem episódios de beber excessivo. Entre os que tiveram episódios de embriaguês observou-se uma tendência a maior risco (OR = 3,95, p = 0,09. CONCLUSÕES: Nossos achados sugerem um menor risco para doença coronariana entre os bebedores moderados. Destaca-se que os estudos que avaliam o impacto do álcool sobre doença cardíaca precisam identificar o padrão de uso de álcool dos sujeitos, visto que este aspecto pode modificar o risco. Políticas públicas são necessárias para reduzir o uso nocivo de álcool e a morbidade a ele relacionada no país.

  15. Estudo de propriedades estruturais e opticas de multicamadas epitaxiais emissoras de luz baseadas em InGaN/GaN

    Science.gov (United States)

    Pereira, Sergio Manuel de Sousa

    Esta tese apresenta os resultados de uma investigacao experimental em filmes epitaxiais emissores de luz baseados em InxGa1-xN. O InxGa1-xN e uma liga semicondutora ternaria do grupo III-N muito utilizada como camada activa numa gama de dispositivos optoelectronicos em desenvolvimento, incluindo diodos emissores de luz (LEDs) e diodos laser (LDs), para operacao na regiao do visivel e ultravioleta do espectro electromagnetico. Neste estudo, caracterizam-se as propriedade opticas e estruturais de camadas simples e pocos quânticos multiplos (Multiple Quantum Wells, MQWs) de InxGa1-xN/GaN, com enfase nas suas propriedades fisicas fundamentais. O objectivo central do trabalho prende-se com a compreensao mais profunda dos processos fisicos que estao por tras das suas propriedades opticas, preenchendo o fosso existente entre aplicacoes tecnologicas e o conhecimento cientifico. Nomeadamente, a tese aborda os problemas da medicao da fraccao de InN (x) em multicamadas ultrafinas sujeitas a tensoes, a influencia da composicao e das tensoes microscopicas nas propriedades opticas e estruturais. A questao relativa a segregacao de fases em multicamadas de InxGa1-xN/GaN e tambem discutida a luz dos resultados obtidos. A metodologia seguida assenta na integracao de resultados obtidos por tecnicas complementares atraves de uma analise sistematica e multidisciplinar. Esta abordagem passa pela combinacao de: 1) Crescimento de amostras por deposicao epitaxial em fase de vapor organometalico (MOVPE) com caracteristicas especificas de forma a tentar isolar parâmetros estruturais, tais como espessura e composicao; 2) Caracterizacao nanoestrutural por microscopia de forca atomica (AFM), microscopica electronica de varrimento (SEM), difraccao de raios-X e retro-dispersao de Rutherford (RBS); 3) Caracterizacao optica a escalas complementares por: espectroscopia de absorcao optica (OA), fotoluminescencia (PL), catodoluminescencia (CL) e microscopia confocal (CM) com analise espectral. Com

  16. Caracterização química de sucos produzidos em escala industrial com novas variedades brasileiras de uva cultivadas no nordeste do Brasil

    OpenAIRE

    Lima, Marcos dos Santos

    2014-01-01

    Tese (doutorado) - Universidade Federal de Santa Catarina, Centro Tecnológico, Programa de Pós-Graduação em Engenharia de Alimentos, Florianópolis, 2014. A produção de suco de uva no Brasil tem aumentado a cada ano, pois apenas no Rio Grande do Sul, maior estado produtor de uvas e derivados, a produção de suco passou de 126,9 milhões de litros em 2008 para 220 milhões de litros em 2012.Esses números são bastante relevantes, pois a produção mundial de sucos de uva está estimada entre 11 e 1...

  17. ENERGIA SOLAR TÉRMICA: INOVAÇÃO EM AQUECIMENTO DE ÁGUA PARA PROCESSOS INDUSTRIAIS / SOLAR THERMAL ENERGY: WATER HEATING INNOVATION FOR INDUSTRIAL PROCESSES

    Directory of Open Access Journals (Sweden)

    E. F. Carreira Junior

    2014-12-01

    Full Text Available O aumento do consumo mundial de energia tem gerado a busca de fontes alternativas, inclusive a solar, de fácil utilização, não exigindo equipamentos muito sofisticados nem complexos. Muitos processos industriais utilizam água em temperaturas até 100°C. O uso de energia solar na indústria ainda é baixo se comparado ao consumo energético total. O objetivo deste artigo é investigar possibilidades de usos de aquecimento solar de água em processos industriais, para o que foi utilizada pesquisa bibliográfica em artigos internacionais visando identificar o estágio atual dessas aplicações no mundo. Pesquisa exploratória de dados secundários do mercado brasileiro de sistemas de aquecimento solar no Departamento Nacional de Aquecimento Solar (DASOL, e no Plano Nacional de Eficiência Energética 2010-2030 (PNEf-2010 do Ministério de Minas e Energia, buscou caracterizar o estágio atual desse setor no Brasil. O estudo permite concluir que o uso de aquecimento solar de água em indústrias no Brasil é possível e representa uma alternativa que pode contribuir para a redução do custo e do consumo de energia em 30% a 40% dos processos de aquecimento em baixas temperaturas, especialmente nos setores de alimentos, bebidas, têxtil e químico.

  18. Projeto e desenvolvimento de uma interface de rede local para aplicações em automação industrial

    OpenAIRE

    Leonardo Appezato

    1990-01-01

    Resumo: Esta dissertação apresenta o projeto de uma interface de rede local, desenvolvida no Instituto de Automação do Centro Tecnológico para Informática. Este projeto tem uma proposta de implementação de hardware e software objetivando sua utilização em aplicações industriais. O projeto constitue-se em uma placa inteligente onde se localizam as duas camadas inferiores do Modelo de Referência OSI da ISO, implementadas de uma forma similar à especificação Mini-MAP. A subcamada MAC é do tipo "...

  19. ENERGIA SOLAR TÉRMICA: INOVAÇÃO EM AQUECIMENTO DE ÁGUA PARA PROCESSOS INDUSTRIAIS / SOLAR THERMAL ENERGY: WATER HEATING INNOVATION FOR INDUSTRIAL PROCESSES

    OpenAIRE

    E. F. Carreira Junior; J. B. Sacomano; M. Mollo Neto

    2014-01-01

    O aumento do consumo mundial de energia tem gerado a busca de fontes alternativas, inclusive a solar, de fácil utilização, não exigindo equipamentos muito sofisticados nem complexos. Muitos processos industriais utilizam água em temperaturas até 100°C. O uso de energia solar na indústria ainda é baixo se comparado ao consumo energético total. O objetivo deste artigo é investigar possibilidades de usos de aquecimento solar de água em processos industriais, para o que foi utilizada pesquisa bib...

  20. Fatores determinantes no processo de decisão de investimentos em robotização na indústria Brasileira de autopeças Main factors on robotics investments decision in the Brazilian autoparts industry

    Directory of Open Access Journals (Sweden)

    Rene Meira Medina

    2010-01-01

    Full Text Available A desverticalização do processo produtivo na indústria automobilística implicou na migração de parte da produção de sistemas e subsistemas dos veículos para a indústria de autopeças. Essa migração trouxe inovações no desenvolvimento de produtos e processos e novos padrões de qualidade. Dentre as inovações de processo destaca-se a robotização industrial, que conquista espaço crescente nas linhas de produção sob o argumento corrente relacionado aos ganhos de qualidade, além de vantagens ergonômicas, mas que demanda investimentos relativamente altos. Sendo esse um setor com baixa atratividade sob a ótica da rentabilidade e do retorno do capital, as decisões de investimentos em robotização revestem-se de importância relativamente elevada porque, além de impactarem significativamente os resultados financeiros, são decisões de natureza estratégica que influenciam a competitividade das empresas. Dado este contexto, esta pesquisa foi realizada com o objetivo de analisar quais são os fatores mais importantes no processo de decisão de investimento em robotização industrial nas empresas de autopeças brasileiras. Com base em entrevistas com especialistas dos fabricantes de robôs e de autopeças e em uma análise fatorial exploratória realizada com empresas de autopeças, concluiu-se que os aspectos financeiros relacionados a custos e retorno a longo prazo são os fatores de maior importância. Aspectos como tecnologia, qualidade e produtividade associadas à robotização têm uma importância secundária e, neste sentido e em relação a esta decisão, a estratégia de manufatura nas empresas de autopeças amostradas pode ser considerada subordinada à estratégia financeira, devendo a ela estar alinhada.The deverticalization of the production process in the automotive industry has resulted in a migration of part of the production of vehicles systems and subsystems to the autoparts industry. Such migration has

  1. Estudo da ocorrência de salmonelas em ingredientes, rações e suabes de pó colhidos em uma fábrica industrial de ração

    Directory of Open Access Journals (Sweden)

    Ricardo Albuquerque

    1999-01-01

    Full Text Available Durante um ano de colheita em uma fábrica comercial de ração, foram examinadas para a presença de Salmonella spp. 136 amostras de ingredientes de rações, 43 amostras de rações prontas e 110 amostras de suabes de pó. Apenas com o uso dos suabes é que não se conseguiu o isolamento. Entre os ingredientes examinados, encontrou-se salmonela em 19,85% das amostras, sendo que os subprodutos de origem animal foram mais fortemente contaminados, tendo propiciado 50% de percentual de isolamento; para os derivados lácteos, obtiveram-se 7,5%; e para outras matérias-primas, 12,5%. Foi obtido 4,65% de positividade para as rações examinadas.

  2. APLICAÇÃO DO DMAIC PARA SOLUÇÃO DE LATAS AMASSADAS EM PROCESSOS DE UMA FABRICA DE LEITE EM PÓ / DMAIC METHODS FOR CANS CRUSHED PROBLEM SOLLUTION IN A MILK POWDER INDUSTRY

    Directory of Open Access Journals (Sweden)

    S. da S. Rêgo

    2015-06-01

    Full Text Available Problemas com latas enferrujadas, amassadas ou estufadas, podem levar a doenças como o botulismo por conterem bactérias que causam infecções alimentares. Na empresa estudada, localizada no interior de São Paulo, como em todas do segmento, o leite em pó é embalado, majoritariamente por latas de alumínio que são revestidas internamente com vernizes e outros materiais visando proteger o leite de metais provenientes do alumínio. Por conseguinte, o objetivo do estudo era a resolução do problema das latas amassadas que para tanto foi utilizado como metodologia um estudo de caso com abordagem quantitativa através do método DMAIC desenvolvida pelo Seis Sigma. Foi realizado um levantamento sobre o descarte de latas na empresa verificando-se uma perda média e, a partir desse histórico, calculada uma meta de perda. Com a meta definida calculou-se o saving anual do projeto. Durante a aplicação do DMAIC, ficou constatado que a maior taxa de perda ocorria no transporte entre a fábrica de latas e a fábrica que envasa o leite. Foram realizadas diversas ações para solucionar problemas que resultavam em latas amassadas e, nos dois primeiros meses da fase control, constatou-se perdas menores que a meta calculada, resultando em uma economia. Observou-se que o transporte entre as duas fábricas ainda é impactante no descarte de latas.

  3. Direcionadores da adoção de estratégias de postponement: estudo multicaso em empresas da indústria de alimentos Drivers in the adoption of postponement strategy: a multicase study in the food industry

    Directory of Open Access Journals (Sweden)

    Karine Araújo Ferreira

    2012-01-01

    Full Text Available O propósito deste artigo foi investigar a aplicação prática do postponement em empresas alimentícias brasileiras e identificar os direcionadores que motivam/facilitam a adoção do postponement nessas empresas. Seis estudos de caso foram realizados em empresas do segmento de fabricação de conservas de frutas e vegetais, como empresas processadoras de suco laranja e de derivados de tomate. Além de maior discussão sobre o tema e a verificação de sua aplicação em empresas alimentícias, este trabalho traz duas contribuições principais: a primeira é apresentar um quadro teórico com os principais direcionadores para a adoção do postponement identificados na literatura; a segunda é confrontar os direcionadores da pesquisa empírica e teórica, gerando um quadro teórico com os principais direcionadores adaptado para indústria de alimentos.The purpose of this article is to investigate the practice of the postponement strategy in Brazilian food industry companies and identify which drivers that promote/facilitate the adoption of postponement in these companies. Six case studies were realized in processing and canning fruits and/or vegetables companies, such as orange juice and tomatoes processing companies. In addition to further discuss on the issue and verification of its application in food companies, this works presents two main contributions. The first is to present a theoretical framework with the main drivers for postponement strategy adoption based on the literature. The second is confronts the drivers obtained from empirical research and theory, generating the theoretical framework with the main drivers, adapted to the food industry.

  4. Maximização da lucratividade em produção conjunta: um caso na indústria frigorífica Maximizing the profitability in joint-production: a case in the poultry industry

    Directory of Open Access Journals (Sweden)

    Ricardo Augusto Cassel

    2006-08-01

    Full Text Available O presente artigo parte do problema do cálculo de custos em indústrias de produção conjunta. Observa-se que a abordagem tradicional adotada para tratar o tema, o método do custo conjunto, apresenta limitações no que tange ao modelo adotado e aos resultados obtidos em termos da análise da lucratividade dos diferentes produtos finais. Como forma de tratar o problema apresenta-se uma abordagem alternativa baseada na Teoria das Restrições suportada por técnicas de Pesquisa Operacional. Visando mostrar as diferenças dos resultados na utilização dos dois métodos, é realizado um estudo de caso em uma unidade de abate e industrialização de aves. Os resultados obtidos, em termos da lucratividade global da operação, apresentam diferenças significativas. A abordagem da Teoria das Restrições aplicada com base na utilização de técnicas de Pesquisa Operacional demonstra-se mais eficaz do prisma da tomada de decisão.This paper discusses the problem related to the costing in joint product industries. Traditional approaches to this subject present limitations regarding the analysis of the individual profitability of each final product. This problem is discussed and an alternative approach based on the Theory of Constraints, and supported by the Operational Research, is proposed. To demonstrate the differences between this new approach and the traditional one, a case study in a poultry company is presented, and the results are discussed.

  5. Penetration of natural gas in industrial processes for direct burning: the case of ceramics, cement and glass industries; Penetracao do gas natural em processos industriais de queima direta: caso das industrias ceramica, cimento e vidro

    Energy Technology Data Exchange (ETDEWEB)

    Berni, Mauro Donizeti; Leite, Alvaro A. Furtado [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Dorileo, Ivo Leandro [Universidade Federal do Mato Grosso (NIEPE/UFMT), Cuiaba, MT (Brazil). Nucleo Interdisciplinar de Estudos em Planejamento Energetico; Bajay, Sergio Valdir [Universidade estadual de Campinas (FEM/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica. Dept. de Energia], e-mail: bajay@fem.unicamp.com.br

    2008-07-01

    Industrial sector can use the natural gas (NG) as raw material, as fuel and in co-generation. The NG as fuel is used, predominantly, to produce heat in the Brazilian industries. That rate, both main forms of industrial use of the NG are its direct burning in kilns - when the direct contact is had with the product - and the supply of process heat through boilers, for instance. Direct burning is used in the ceramic, cement and glass industries. This work discuss the penetration opportunity of the NG in the direct burning regarding the fuel oil and other energy that it can substitute, the environmental effects and the co-generation possibilities in each one of the analyzed industrial blanches in this work. (author)

  6. Mortalidade por câncer em trabalhadores da indústria da borracha de São Paulo Cancer mortality among rubber industry workers in São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Hélio Neves

    2006-04-01

    Full Text Available OBJETIVO: Avaliar as mortes por câncer em trabalhadores da indústria da borracha de acordo com o tamanho da empresa. MÉTODOS: Coorte histórica com 9.188 trabalhadores masculinos, matriculados em sindicato de trabalhadores da indústria de borracha do Estado de São Paulo entre 1975 e 1985, sobreviventes em janeiro de 1990 e acompanhados até o final de 2000. As mortes por câncer foram comparadas internamente à coorte, cujos membros foram subdivididos em estratos por porte e sub-ramo da empresa, setor de trabalho e qualificação profissional. A abordagem por conjuntos de risco e regressão logística condicional foi utilizada para o cálculo dos riscos relativos, ajustados por idade, tempo desde o primeiro emprego e tempo de trabalho na indústria da borracha. RESULTADOS: Quando comparados aos empregados de grandes empresas, trabalhadores de pequenas empresas mostraram excesso de mortes por todos tipos de câncer (RR=2,33; IC 95%: 0,90-6,03; tumores de estômago (RR=3,47; IC 95%: 2,57-4,67 e do trato aero-digestivo superior (RR=2,49; IC 95%: 1,78-3,48. Identificou-se excesso de mortes por câncer nos trabalhadores dos setores de manutenção (RR=2,23; IC 95%: 0,73-6,76; expedição, armazenamento e transporte (RR=2,97; IC 95%: 0,77-11,38; e produção (RR=3,51; IC 95%: 1,07-11,57, comparados aos trabalhadores dos setores administrativos. CONCLUSÕES: Os resultados mostram evidências de aumento do risco de tumores de estômago e do trato aero-digestivo superior e, possivelmente, por câncer em geral em trabalhadores de empresas de pequeno porte da indústria da borracha quando comparados aos trabalhadores das grandes empresas.OBJECTIVE: To investigate cancer deaths among rubber industry workers according to company size. METHODS: This historical cohort study included 9,188 male workers, engaged as members of a workers' union in São Paulo, Southeastern Brazil, between 1975 and 1985, alive in January 1990 and followed until the end of 2000

  7. Aplicação da análise custo/volume/lucro em pequena indústria de laticínios = Application of a cost/volume/profit analysis in a small industry of dairy products

    Directory of Open Access Journals (Sweden)

    Rodney Wernke

    2008-11-01

    Full Text Available Relata estudo de caso em que foi aplicada a Análise Custo/Volume/Lucro como instrumento de avaliação do desempenho de uma pequena indústria. Inicialmente foi efetuada uma revisão bibliográfica sobre os conceitos utilizados, especialmente margem de contribuição, ponto de equilíbrio e margem de segurança. Em seguida, descreveu-se o contexto da empresa pesquisada, mostrando suas principais características. Posteriormente foram apresentadas as etapas seguidas para aplicação da Análise Custo/Volume/Lucro. Foram demonstrados os cálculos efetuados e comentados os resultados oriundos mais relevantes para a administração da organização enfocada pelo estudo. Por último, foram elencadas as informações gerenciais obtidas, ressaltadas as limitações inerentes à ferramenta utilizada e sugerido tema para trabalhos futuros.This article reports a study case in which a Cost/Volume/Profit Analysis was applied asa tool to evaluate the performance of a small industry of dairy products. At first, abibliographic revision of the concepts was made, especially contribution margin, balancedpoint and security margin. After, the context of the industry was described, showing itsmain characteristics. After that, the steps which were followed so that the Cost/Volume/Profit Analysis was applied were presented, the calculi made were demonstrated andthe most relevant results from this study were commented for the industry management.Finally, the managerial information obtained was listed; emphasizing the limitations ofthe tool which was used and a theme for further research was suggested.

  8. The case study of management of solid wastes in a petroleum industry; O estudo de caso do gerenciamento de residuos solidos em uma refinaria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Lizabela Souza de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica]. E-mail: lizabela@eq.ufrj.br; Nicolaiewsky, Elioni [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Quimica]. E-mail: elioni@eq.ufrj.br; Freire, Denize D.C. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Bioquimica]. E-mail: denize@eq.ufrj.br

    2003-07-01

    Crude oil refining is an industrial activity known as very pollutant, as all other activities of the petroleum industry, regarding either the volume or the concentration of the resides involved, thus generating emissions, effluents and solid wastes. The aim of the present work is to study solid waste management of a certain petroleum refinery, located in Rio de Janeiro. On the solid wastes management of that refinery, the following aspects were considered: origin and period of generation, conditioning, storage, transportation, treatment and final disposal. After listing all the resides and through analysis of the industrial wastes (norms, terms, inventory), the industrial process and office routines were then analyzed. The solid wastes were divided in two categories: industrial and administrative wastes. As far as destination is concerned, resides classified as Class I are either co-processed or incinerated, while Class II and Class III wastes, when not recycled, are sent to industrial or sanitary landfill. Finally, after analyzing the wastes management of the refinery, it has been proposed a plan of achievements in order to enhance the environmental goal of the refinery. (author)

  9. Remoção de sulfato de águas residuárias industriais em reator anaeróbio de leito fixo operado em bateladas sequenciais Sulfate removal from industrial wastewaters in fixed film anaerobic sequential batch reactor

    Directory of Open Access Journals (Sweden)

    Arnaldo Sarti

    2008-03-01

    Full Text Available Avaliou-se o potencial de uso reator anaeróbio operado em bateladas seqüenciais com biomassa imobilizada (ASBBR, em escala piloto, no tratamento de água residuária industrial contendo elevadas concentrações de sulfato. O ASBBR, com volume total de 1.2 m³, foi preenchido com carvão mineral como meio suporte para imobilização da biomassa (leito fixo. Foram aplicadas cargas de 0,15; 0,30; 0,65; 1,30 e 1,90 kg SO4-2/ciclo (ou batelada com duração de 48 h, correspondendo, respectivamente, às concentrações de sulfato no afluente de 0,25; 0,50; 1,0; 2,0 e 3,0 gSO4-2.l-1. Utilizou-se etanol como doador de elétrons para a redução do sulfato. O reator foi operado à temperatura ambiente (29±8ºC, tendo sido obtidas eficiências médias na redução de sulfato entre 88 e 92% em 92 ciclos (275 dias. Os resultados obtidos permitem concluir que o uso de reatores ASBBR constitui-se em alternativa eficiente para a remoção de sulfatos de águas residuárias com características semelhantes às utilizadas neste trabalho.The potential use of an anaerobic sequencing batch biofilm reactor (ASBBR in pilot-scale for the treatment of a sulfate-rich industrial wastewater was evaluated. The pilot 1.2 m³ ASBBR reactor was filled with mineral coal for biomass immobilization (fixed film. The sulfate loading rates applied were 0.15; 0.30; 0.65; 1.30 and 1.90 kg SO4-2/cycle (or batch. Each cycle lasted 48 h. The influent concentrations were, respectively, 0.25; 0.50; 1.0; 2.0 and 3.0 gSO4-2.l-1. Ethanol was used as electron donor for sulfate reduction. The reactor operated at ambient temperature (29±8ºC, and the mean efficiencies of sulfate removal were in the range 88 to 92% in the 92 run cycles. The total operating period comprised 275 days. Based on the results obtained in this research, it could be concluded that the ASBBR can be an efficient alternative for the removal of sulfate from other industrial wastewaters with similar characteristics.

  10. Análise da Indústria Brasileira de Software com Base em uma Taxonomia das Empresas: Subsídios para a Política Industrial

    Directory of Open Access Journals (Sweden)

    José Eduardo Roselino

    2006-01-01

    Full Text Available As atividades de software foram eleitas como opção estratégica da Política Industrial, Tecnológica e de Comércio Exterior – PITCE a partir da identificação de seu papel crescentemente crucial para o desenvolvimento das mais diversas atividades. A política setorial vem sendo desenhada com o objetivo de alcançar duas metas principais: elevar as exportações brasileiras de software e ampliar a participação das empresas nacionais no mercado doméstico. O artigo apresenta um panorama da indústria brasileira de software que permite discutir a adequação dos objetivos traçados para a política industrial. A abordagem desenvolvida identifica a expressiva presença das empresas de capital nacional em todos os segmentos considerados, ainda que exibindo grandes assimetrias com relação às empresas de capital estrangeiro. O quadro apresentado sugere que o enfoque da política deveria centrar-se no reforço aos aspectos virtuosos já existentes na indústria brasileira de software, concentrando a ação das políticas na consolidação das empresas nacionais para o enfrentamento de um mercado crescentemente competitivo.The software activities have been elected as a strategic option for the Brazilian Technology, Trade and Industrial Policy – PITCE following the recognition of their increasingly crucial role in the development of other activities. The policy for the software industry has been shaped by two main goals: to raise the Brazilian software exports and to increase the market-share of national firms in the domestic market. This paper offers an overview of the Brazilian software industry that helps questioning the adequacy of the policy goals for that industry. The approach developed in the paper identifies an expressive number of Brazilian firms in all segments of the software industry, despite the existence of important asymmetries between national and foreign companies. It suggests that policy-making should focus on the

  11. Variabilidade genética em trigos brasileiros a partir de caracteres componentes da qualidade industrial e produção de grãos Genetic variability for bread making quality and grain yield among Brazilian wheat genotypes

    Directory of Open Access Journals (Sweden)

    Douglas André Mallmann Schmidt

    2009-01-01

    Full Text Available O melhoramento genético para a qualidade industrial do trigo pode representar uma oportunidade de agregar valor de mercado aos produtos agrícolas, sendo o trigo um dos cereais com maior associação entre a qualidade intrínseca e a remuneração ao agricultor. O objetivo do trabalho foi o de determinar a variabilidade genética a partir de caracteres indicativos da qualidade industrial e o rendimento de grãos, e estimar o grau de associação entre estes caracteres em 22 genótipos de trigo. O experimento foi desenvolvido em área experimental pertencente à Universidade Federal de Pelotas, Capão do Leão (RS. Os resultados indicaram a provável existência de variabilidade genética para os caracteres em estudo, a qual pode auxiliar pesquisadores na escolha de genitores. Cruzamentos artificiais envolvendo os genótipos BRS 208, Rubi e Safira podem ser os mais promissores no intuito de incrementar o ganho genético, tanto para a qualidade industrial quanto para a produtividade de grãos. O rendimento de grãos manifestou correlação negativa com o conteúdo de proteína da farinha revelando que a superioridade genotípica para o rendimento de grãos pode afetar negativamente a proporção protéica. Entretanto, o conteúdo de proteína não evidenciou associação significativa com a força de glúten (indicador da qualidade industrial, revelando que a concentração de proteína da farinha não foi eficiente para predizer a qualidade industrial. Este resultado sugere a possibilidade de obtenção de genótipos superiores para o rendimento de grãos sem comprometer a qualidade industrial.The breeding for wheat bread making quality represents a great opportunity to incorporate commercial value to agricultural products. Wheat has one of the best relationship between end product quality and farmer earnings. Genetic variability among 22 different genotypes based on bread making quality traits and grain yield and the degree of their association

  12. Cianobactérias e microcistina em águas de rio destinadas ao abastecimento de centro industrial de Caruaru, PE, Brasil | Cyanobacteria and microcystin in river waters intended to industrial park supply in Caruaru-PE, Brazil

    Directory of Open Access Journals (Sweden)

    Catarina Paula da Silva Ramos

    2016-02-01

    Full Text Available As cianobactérias são responsáveis pela produção de cianotoxinas que, uma vez acumuladas, podem causar sérios danos à saúde humana e animal. As microcistinas são o tipo mais comum de cianotoxinas e são promotoras de tumores hepáticos. O objetivo deste trabalho foi verificar a ocorrência de cianobactérias e determinar a presença da toxina microcistina em amostras de água do rio Ipojuca no perímetro da cidade de Caruaru, PE, Brasil. Amostras de água foram coletadas em cinco pontos estratégicos deste manancial durante treze meses consecutivos. Para a pesquisa de cianobactérias, foi utilizado o método de sedimentação de Utermöhl para quantificação e identificação das espécies. Para a pesquisa de microcistina foi utilizada a Cromatografia Líquida de Alta Eficiência (CLAE. Os resultados mostraram três gêneros produtores de microcistinas e a presença desta toxina em 100% das amostras analisadas, confirmando a relevância do monitoramento de cianobactérias e cianotoxinas em águas de abastecimento público, pois assim como o rio Ipojuca, vários mananciais de Pernambuco apresentam florações de cianobactérias que podem ser tóxicas. Este trabalho mostrou a importância do estudo destes organismos e a detecção de suas toxinas fornecendo subsídios às ações preventivas de vigilância ambiental em saúde. ============================================= Cyanotoxin producing Cyanobacteria can cause serious harm to human and animal health. Microcystins, the most common type of cyanotoxins, promote liver tumors in men. Thus, we aimed at verifying the occurrence of cyanobacteria in water samples from the Ipojuca’s river at the perimeter of Caruaru-PE, Brazil, and determining if the toxin was also present. Water samples were collected at five strategic points over thirteen consecutive months. High Performance Liquid Chromatography (HPLC was used to obtain microcystins. The Utermöhl sedimentation method was used to

  13. MAICAPI - metodologia para avaliação de impactos e custos ambientais em processos industriais: estudo de caso Methodology for assessment of environmental impacts and costs in industrial processes: a case study

    Directory of Open Access Journals (Sweden)

    Paulo Ricardo Santos da Silva

    2006-09-01

    Full Text Available A preservação do meio ambiente, o uso racional de recursos naturais e a mudança de postura da sociedade frente às questões ambientais têm levado as indústrias a buscar um melhor desempenho nessa área. Aliado a esses fatores, está a constatação de que a geração de rejeitos é sinônimo de perdas econômicas. Desta forma, um melhor desempenho ambiental representa ganhos financeiros para a organização. Em vista disso, este artigo apresenta a Metodologia MAICAPI, desenvolvida para avaliar os impactos e os custos ambientais de processos industriais. Sua aplicação em uma indústria metal-mecânica, fabricante de incineradores industriais, permitiu identificar quais as etapas do processo produtivo apresentam impactos ambientais críticos, revelando as operações que mais contribuem para os custos ambientais dessa empresa.Nowadays, industries are searching a better environmental performance stimulated by changes in society behavior concerning to environmental issues and reasonable use for natural resources. In addition, companies realized that they have economic losses producing wastes. So, a better environmental perfomance means financial benefits to the organization. This work presents MAICAPI Methodology developed to evaluate environmental impacts and costs in industrial processes. This methodology was applied on an incinerator machine factory and it allowed to identify process phases whose environmental impacts were critics. Besides, the methodology application also identified operations with higher environmental costs in this company.

  14. Efeito de práticas de manejo sobre o rendimento de grãos e a qualidade industrial dos grãos em arroz irrigado Effects of management practices on rice tield grain and hillquality

    Directory of Open Access Journals (Sweden)

    Luciano Pasqualoto Canellas

    1997-08-01

    Full Text Available Foi desenvolvido um experimento a campo num gleissolo em Casemiro de Abreu, RJ, de outubro de 1993 a fevereiro de 1994, com o objetivo de verificar o efeito do uso de calcário em linha de semeadura, de cultivares, densidades de semeadura e épocas de colheita sobre a produção e a qualidade industrial do arroz. Foram utilizadas duas cultivares de arroz (BR-IRGA 412 e BR-IRGA 409, duas doses de calcário aplicadas na linha de semeadura (0 e 200kg ha-1 e três densidades de semeadura (100, 200 e 300kg de sementes ha-1, colhidas aos 140, 147 e 154 dias após a semeadura. O uso do calcário proporcionou aumento de 25% no rendimento de grãos da cultivar BR-IRGA 409. A qualidade industrial do arroz foi influenciada pela época de colheita, sendo a mais indicada quando o teor de umidade do grão se encontra entre 17,5 - 22%.The purpose of the research was to study the use of liming, seeding density of two paddy rice cultivars and harvest time with rice yield and mill quality. The experiment was carried out during 1993/94 growing season in Casemiro de Abreu (RJ, Brazil. The two rice cultivars used were BR-IRGA 409 and BR-IRGA 412, two of limestone doses (0 and 200kg ha-1 and three seeding densities (100, 200 and 300kg ha-1 were distributed in a completely randomized block design. The use of liming and variation of seeding density did not affect rice quality. The moisture content of the rice grains that resulted in highest quality at harvest was between 17,5-22%.

  15. Produção de mudas de goiabeira (Psidium guajava L., inoculadas com o fungo micorrízico arbuscular Glomus clarum, em substrato agro-industrial Production of guava ( Psidium guajava L. plants inoculated with arbuscular mycorrhizal fungi Glomus clarum, in agro-industrial substrate

    Directory of Open Access Journals (Sweden)

    JOLIMAR ANTONIO SCHIAVO

    2002-08-01

    Full Text Available Conduziu-se um experimento em casa de vegetação, com o objetivo de avaliar o crescimento de mudas de goiabeira (Psidium guajava L., produzidas em blocos prensados, confeccionados com resíduos agro-industriais, e inoculadas com o fungo micorrízico arbuscular (FMA Glomus clarum Nicolson & Schenck. O delineamento experimental utilizado foi o inteiramente casualizado, em esquema fatorial 2 x 2, sendo 2 tratamentos microbiológicos: controle e FMA; e 2 sistemas de produção de mudas: blocos prensados (nova metodologia e tubetes plásticos (tradicional, com 5 repetições. O substrato utilizado para a confecção dos blocos prensados e enchimento dos tubetes foi constituído por uma mistura de bagaço de cana-de-açúcar e torta de filtro (3:1 v/v. O FMA proporcionou aumentos significativos na produção de matéria seca, conteúdo de N e P da parte aérea da goiabeira, apenas no sistema de produção das mudas em blocos prensados. Mudas produzidas e inoculadas em blocos prensados mostraram um aumento de 88% na matéria seca da parte aérea, 82% e 89% para os conteúdos de nitrogênio e fósforo da parte aérea, respectivamente, em relação ao tratamento-controle.A greenhouse experiment was carried out to evaluate the growth of guava plant seedlings, inoculated with arbuscular mycorrhizal fungi (AMF, Glomus clarum Nicolson & Schenck, produced in pressed blocks made with agro-industrial residues. The experimental design utilized was a completely randomized in factorial 2x2, having two microbiological treatments: control and inoculated; two systems of production: pressed blocks (new methodology and plastic tubes (traditional, with 5 repetitions. The substrate utilized to make the pressed blocks and to fill the plastic tubes was constituted by a mixture of sugarcane bagasse and filter cake (3:1 v/v. The AMF inoculation led to a significant increase in dry matter yield and nutrients content of shoot plants, only in pressed blocks. Plants produced in

  16. Co-generation on steam industrial systems with disks turbines; Co-geracao em sistemas industriais de vapor com turbinas de discos

    Energy Technology Data Exchange (ETDEWEB)

    Lezsovits, Ferenc [Universidad de Tecnologia y Economia de Budapest (Hungary)

    2010-03-15

    The disk turbine, also called Tesla turbine, being of simple construction and low cost, can be used as steam pressure reduction on industrial systems, generating simultaneously electric power, becoming the co-generation even at lower levels. Can be used for various operational parameters and mass flux ratios.This paper analyses the advantages and disadvantages of the turbines under various operation conditions.

  17. Inteligência Artificial: uma aplicação em uma indústria de processo contínuo Artificial Intelligence: an application in a continuous process industry

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2002-12-01

    Full Text Available Este trabalho descreve uma aplicação da lógica fuzzy de controle e do CBR (Raciocínio Baseado em Casos na indústria de processo contínuo. Essas técnicas são discutidas dentro do campo de conhecimentos da Inteligência Artificial, associadas ao processo de tomada de decisões empresariais. A Inteligência Artificial é apontada como um campo de conhecimentos que pode apoiar a tomada de decisões de um modo mais simples e mais preciso do que outros métodos, tais como a modelagem e a gestão por indicadores. As etapas para a construção de um sistema especialista, construído principalmente a partir de experiências empíricas humanas, também são discutidas. O trabalho se encerra apresentando uma rotina de tomada de decisão em um processo termoquímico na indústria cimenteira conduzida por um sistema especialista baseado em CBR e lógica fuzzy, e uma discussão sobre resultados comparados com operadores humanos nas mesmas condições.This paper describes an application of the fuzzy logic control and CBR in the continuous process industry. The techniques are discussed inside the larger branch of knowledge called Artificial Intelligence (AI, which can be related with the decision-making process in companies. Artificial Intelligence is pinpointed as a science that can support decisions in an easier and more precisely way than others methods as models and process indicators management. The steps for the erection of an Expert System, built mainly from human empirical experiences, are also discussed. The paper comes to an end by presenting a decision-making routine in a thermochemical process, in the cement industry, as performed by an Expert System decision-maker, based in CBR and fuzzy logic, and leading to a discussion about results and performance gains, in comparison with human-guided action in the same process.

  18. Indicadores de performance em manutenção industrial : utilização, valor e disponibilidade de informação

    OpenAIRE

    Simões, Jorge Alexandre Mendes.

    2011-01-01

    Dissertação de mestrado em Gestão, apresentado à Faculdade de Economia da Universidade de Coimbra, sob a orientação Carlos Ferreira Gomes. A importância crescente da manutenção nas organizações industriais, impulsionada pelas constantes evoluções tecnológicas de todos os seus processos e pela pressão legislativa sobre as indústrias, a nível ambiental, de segurança e saúde pública, acompanhada pela ainda incipiente vertente de gestão nesta área, motivou a elaboração do presente ...

  19. Measurement of radioactive lines in powdered milk samples in Londrina (Parana State, Brazil) region; Medida de tracos radioativos em amostras de leite em po da regiao de Londrina - PR

    Energy Technology Data Exchange (ETDEWEB)

    Melquiades, Fabio Luiz

    2000-07-01

    This work deals with the measurement of radioactive lines in powdered milk, with high resolution gamma spectrometry, using a HPGe detector with relative efficiency of 10%, coupled to the electronic nuclear chain and a multichannel card of 8192 channels. Some tests were realized before beginning the measurements. The first of them was to define the shield to be used, making several measured with different shields according to the available materials, opting finally for a shield composed of bricks of lead (10 cm thickness), plates of iron (4nm thickness) and of aluminum (2 mm thickness). Four different geometries for the samples recipients were tested, and the Marinelli beaker of 2,1 liters totally filled was the one which supplied the best peak/background ratio. A statistical inference was also realized to determine the sampling that represents each one of the lots of milk to be measured, resulting in a number of 6 samples, for a confidence level of 95%. Two different kinds of powdered milk produced at Londrina were analyzed, Integral Powdered Milk Cativa and Integral Powdered Milk Polly. The samples were properly put in the Marinelli beaker of 2,1 L, sealed and kept for 40 days to reach the secular equilibrium. The counting time for each measurement was two days. It was possible to identify the radionuclides {sup 40} K, {sup 137} Cs and {sup 232} Th (from {sup 208} Tl), whose activities were calculated according to the International Atomic Energy Agency norms (IAEA, 1989). The detector efficiency was measured using calibrated samples, prepared with the certified reference materials IAEA-326 and IAEA-375. Corrections for self-absorption were accomplished, based on measures of samples with different densities. The results obtained for the powdered milk Cativa were: 464{+-} 12 Bq/kg for {sup 40} K, 3,46 {sup {+-}} 1,05 and 0,46 {+-} 1,05 and 0,46 {+-} 0,16 Bq/kg for the minimum detectable activities of {sup 137} Cs and {sup 232} Th, respectively. For the milk Polly, the results were: 452{+-}10 Bq/kg for {sup 40} K, 3,19{sup {+-}} 0,63 and 0,32{sup {+-}} 0,12 Bq/kg for the minimum detectable activities of {sup 137} Cs and {sup 232} Th, respectively. The statistical analyses performed checked the measurements repeatability by means of the Tukey's average comparison test. A correlation analysis between standard deviations and the mean showed the absence of significant systematic deviation. Comparison the results obtained with literature, it was demonstrated that the values of the activities found are within the normal levels of radioactivity for this kind of product and below the maximum permissible levels established by CNEN, that is, the analyzed milk can be normally consumed. On the other hand, the implemented methodology present a good performance, faced to the available experimental conditions. (author)

  20. Measurement of radioactive lines in powdered milk samples in Londrina (Parana State, Brazil) region; Medida de tracos radioativos em amostras de leite em po da regiao de Londrina - PR

    Energy Technology Data Exchange (ETDEWEB)

    Melquiades, Fabio Luiz

    2000-07-01

    This work deals with the measurement of radioactive lines in powdered milk, with high resolution gamma spectrometry, using a HPGe detector with relative efficiency of 10%, coupled to the electronic nuclear chain and a multichannel card of 8192 channels. Some tests were realized before beginning the measurements. The first of them was to define the shield to be used, making several measured with different shields according to the available materials, opting finally for a shield composed of bricks of lead (10 cm thickness), plates of iron (4nm thickness) and of aluminum (2 mm thickness). Four different geometries for the samples recipients were tested, and the Marinelli beaker of 2,1 liters totally filled was the one which supplied the best peak/background ratio. A statistical inference was also realized to determine the sampling that represents each one of the lots of milk to be measured, resulting in a number of 6 samples, for a confidence level of 95%. Two different kinds of powdered milk produced at Londrina were analyzed, Integral Powdered Milk Cativa and Integral Powdered Milk Polly. The samples were properly put in the Marinelli beaker of 2,1 L, sealed and kept for 40 days to reach the secular equilibrium. The counting time for each measurement was two days. It was possible to identify the radionuclides {sup 40} K, {sup 137} Cs and {sup 232} Th (from {sup 208} Tl), whose activities were calculated according to the International Atomic Energy Agency norms (IAEA, 1989). The detector efficiency was measured using calibrated samples, prepared with the certified reference materials IAEA-326 and IAEA-375. Corrections for self-absorption were accomplished, based on measures of samples with different densities. The results obtained for the powdered milk Cativa were: 464{+-} 12 Bq/kg for {sup 40} K, 3,46 {sup {+-}} 1,05 and 0,46 {+-} 1,05 and 0,46 {+-} 0,16 Bq/kg for the minimum detectable activities of {sup 137} Cs and {sup 232} Th, respectively. For the milk Polly, the results were: 452{+-}10 Bq/kg for {sup 40} K, 3,19{sup {+-}} 0,63 and 0,32{sup {+-}} 0,12 Bq/kg for the minimum detectable activities of {sup 137} Cs and {sup 232} Th, respectively. The statistical analyses performed checked the measurements repeatability by means of the Tukey's average comparison test. A correlation analysis between standard deviations and the mean showed the absence of significant systematic deviation. Comparison the results obtained with literature, it was demonstrated that the values of the activities found are within the normal levels of radioactivity for this kind of product and below the maximum permissible levels established by CNEN, that is, the analyzed milk can be normally consumed. On the other hand, the implemented methodology present a good performance, faced to the available experimental conditions. (author)

  1. Relação entre investimentos em intangíveis e produtividade total de fatores: um estudo do setor industrial brasileiro

    Directory of Open Access Journals (Sweden)

    Janderson Martins Vaz

    2014-01-01

    Full Text Available El presente estudio tuvo como objetivo investigar la intangibilidad y la productividad total de factores (PTF y verificar la relación de causalidad entre esas dos variables en el sector industrial brasileño. Pa ra eso, las variables fueron analizadas por medio del test de causalidad de Granger. Los resultados de los tests de causalidad de Granger mostraron que de los doce sectores analizados, dos presentaban relación de causalidad del GI en el sentido de Granger para la PTF. Por otro lado, dos sectores presentaron relación de causalidad de la PTF en el sentido de Granger para el GI. Esos resultados permitieron concluir que la intangibilidad del sector industrial brasileño, a pesar de presentar crecimiento, aún no ha alcanzado los niveles de intangibilidad de las empresas pertenecientes a los países más desarrollados.

  2. O turismo industrial como potenciador do desenvolvimento local – estudo de caso do Museu do Vinho de Alcobaça em Portugal

    Directory of Open Access Journals (Sweden)

    António Valério Maduro

    2015-01-01

    Full Text Available This work aims at the development of a management model and programme for the Wine Museum of Alcobaça in dialectic articulation with a political strategy of cultural stimulation and local development. By using a deductive methodology, we bring forward a theorethical reflection on the revitalization and redefinition of the industrial tourism linked to viticulture. Having in mind the context of the historical events of the museum, which encompass the social, cultural and territorial context, the institutional genesis and the changing of the authority, the analythical body grows from the notions of enotourism and industrial tourism as differenciating and stimulating elements of a sustainable development. In that sense, the museum takes its role as instigator of a process of social and economic transformation that involves a set of discourses and practices towards a change.

  3. Evaluation of oil and grease removal by adsorptive polymeric resins in semi-industrial scale: influence of temperature; Avaliacao da remocao de oleos e graxas por resinas polimericas adsorventes em escala semi-industrial: influencia da temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luis F.S. de; Silva, Carla M.F. da; Queiros, Yure G.C.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)], e-mail: elucas@ima.ufrj.br

    2011-07-01

    The aim of this study was to evaluate the performance of polymeric resins packed in a fixed bed eluted in semi-industrial scale for oil and greases removal disposed in synthetic oily water in different temperature conditions. For this work, columns packed with vinyl and acryl polymer-base were tested and their efficiency of oil removal was evaluated by fluorimetry technique in two different temperatures: 25 and 60 deg C, in a flow rate condition of 200 mL/min. The experimental results were very good: the removal efficiencies were above 98% in both cases. At 60 deg C, the system keep the efficiency for a longer time: no significant loss in the efficiency was observed after eluting 1,000 times of the column bed volume at 25 deg C and 2,000, at 60 deg C. This result characterizes a great potential of application in the industry. (author)

  4. Characterization, treatment and utilization of rice husk ash in production processes of the industrial branch; Caracterizacao, tratamento e aproveitamento das cinzas da casca do arroz em processos produtivos do ramo industrial

    Energy Technology Data Exchange (ETDEWEB)

    Stracke, Marcelo Paulo; Schmidt, Julia Isabel; Steffen, Ana Cristina; Sokolovicz, Boris; Kieckow, Flavio, E-mail: stracke@santoangelo.uri.br [Universidade Regional Integrada do Alto Uruguai e das Missoes (URI), Santo Angelo, RS (Brazil)

    2016-07-01

    The rice husk ash (CCA) is a black powder rich in silica (contents above 90%) with many industrial applications. The ash was obtained from a rice processing industry in the state of Rio Grande do Sul. In this work the purpose is to characterize the rice husk ash and eliminate the residual carbon by methods such as acid leaching. The white ash is obtained by a chemical process followed by heating between 600 and 800 °C. The results were analyzed in DR-X, TGA and DSC. The DR-X analysis showed that the samples present high levels of silica in the crystalline form of quartz, cristobalite and tridymite. The white ash was obtained with high purity and presented a good result in the manufacture of paints. (author)

  5. AVALIAÇÃO TECNOLÓGICA DE PAINÉIS MDF DE MADEIRA DE Eucalyptus grandis CONFECCIONADOS EM LABORATÓRIO E EM LINHA DE PRODUÇÃO INDUSTRIAL

    Directory of Open Access Journals (Sweden)

    Ugo Leandro Belini

    2010-01-01

    Full Text Available MDF panels of Eucalyptus grandis wood fibers were made in either experimentally in a laboratory or on an industrial production line. In order to analyze the influence of the production condition, the anatomical, physical and mechanical properties of the panels were determined. The wood refining induced the transversal rupture of the transversal fiber wall. The MDF panels obtained from the industrial production line presented less swelling in thickness and absorption values and improved mechanical properties in the requirements of bending strength, module of elasticity and surface resistance. For laboratory MDF panels, it was possible to verify a statistically significant correlation between bending strength and module of elasticity, medium density and internal bond and swelling in thickness and absorption. This tendency was also true for the MDF panels obtained in real conditions of production, however without statistical significance. By comparing the quality properties of MDF panels produced in the laboratory with those obtained in real conditions of production, it was sought to standardize the established variables for obtaining panels on a small scale, as well to make possible the safe transfer and divulgation of information obtained in the laboratory.

  6. Implementation of electrical efficiency project in an beverage industry; Implementacao de um projeto de eficiencia eletrica em uma fabrica de bebidas

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcellos, Arnulfo Barroso de; Corral, Marcela Marcote; Festa, Alexandre Vinicius; Silva, Thiago Vieira da [Universidade Federal de Mato Grosso (UFMT), MT (Brazil); Malheiro, Teresa Irene Ribeiro de Carvalho [Instituto Federal Educacao, Ciencia e Tecnologia de Mato Grosso (IFMT), MT (Brazil); Barros, Regiane Silva de [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2010-07-01

    Proper management of electric energy use in industries promotes benefits to these consumers as well as to the Energy Dealers because they can postpone necessary investments in the electrical system and therefore minimize the social and environmental impacts caused by expansion or construction of new projects for generation / distribution energy, thus benefiting society in general. In most cases the electricity is the most significant portion of fixed costs among industrial consumers. The state of Mato Grosso has one of the electricity rates highest in the country. Thus, energy conservation measures can reduce this portion of expenses without changing the level of production. This article reviews the tariff framework, proposes efficiency measures electrical and analyzes the impact on power quality due to the drive motors via electronic systems in a beverage industry in the state of Mato Grosso. The main objective is to reduce energy costs and optimize its electric drive system with the proposed replacement of low-income induction motors for high-income ones. It was found that through the proposed measures can reduce both the demand of active power as electricity consumption without affecting production levels. (author)

  7. Identification of energy gain potential in industrial processes, through exergetic analysis; Identificacao de potenciais de ganho energetico em processos industriais via analise exergetica

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Lis Nunes; Silva, Ricardo Junqueira; Bernardes, Lucas Lanza; Filgueiras, Pedro Freire [V e M do Brasil S.A., Belo Horizonte, MG (Brazil)

    2011-12-21

    V and M Brazil is an integrated steel mill for the production of steel tubes. The manufacturing process includes various processes and thermal equipment, such as industrial furnaces, boilers, and others. Due to its importance, it is essential that these devices operate with the best possible efficiency. Thus, it becomes necessary to use tools and methods for performance analysis of energy processes that occurs on these devices. One tool that has been widely used in industrial environment is the exergy analysis. It is based on the Second Law of Thermodynamics, and therefore takes into account the entropy generation, indicating the maximum amount of useful energy (work) that can be drawn from a stream, with reference to environmental parameters. This paper aims to apply the exergetic methodology in industrial thermal processes that occurs at V and M Brazil, as a tool for identification of losses and potential performance improvement of energy systems to save on fuel and the reduction of environmental impacts and emissions of greenhouse gases. (author)

  8. COMPETÊNCIAS DOS ALUNOS EGRESSOS DO CURSO SUPERIOR DE TECNOLOGIA EM GESTÃO DA PRODUÇÃO INDUSTRIAL – ESTUDO DE CASO UNINCOR

    Directory of Open Access Journals (Sweden)

    Ebert Guimarães

    2011-01-01

    Full Text Available In the information society, knowledge belonging to the scientific and technological fields demands ever increasing updates in professionalization, specially higher schooling levels andtechnical and interpersonal skills. The purpose of this study is to evaluate the professional competence of graduates students earned course in Management of Technology in Industrial Production, byanalyzing a case study that takes into account the tasks set by the Course Management of Technology in Industrial Production UNINCOR. The subjects were ten graduates (alumni, eleven teachers, fiveteachers teaching the core course, the course coordinator, in charge of Educational and Extension Campus Director General of Betim, in charge of the 72 partner companies / suppliers FIAT Cars S. A.and two managers of the Magna auto parts, which totaled 32 people. The responses of these subjects were submitted to an analysis model that can be called 360-degree vision. The analysis of qualitativedata referenda and allows better understanding of the issues involved in the skills identified. It is possible to conclude that there is a recognition in all groups surveyed about the effectiveness of the course in its purpose to understand the demands and difficulties of the areas of the industrial manager.

  9. Economic analyse of industrial production and electric energy consumption on a sugar-alcohol plant; Analise economica da producao industrial e do consumo de energia eletrica em uma usina sucro-alcooleira

    Energy Technology Data Exchange (ETDEWEB)

    Bini, Aderson

    1993-10-01

    Economic aspects of industrial production of sugar cane and automotive alcohol fuel, the relation between its production and electric energy consumption, electric energy costs to self generated electric power and concessionary supply, involved in plant production on Ribeirao Preto, SP, Brazil, are presented. Studies to verify the relationships between sugar and alcohol production with milling ours as well as sugar cane processed with sugar and alcohol produced are also discussed 27 refs., 12 figs., 38 tabs.

  10. Nervous system cancer mortality in an industrialized area of Brazil 1980 - 1993 Mortalidade por câncer do sistema nervoso em uma área industrializada do Brasil 1980-1993

    Directory of Open Access Journals (Sweden)

    MARCILIA DE A. MEDRADO-FARIA

    2000-06-01

    Full Text Available OBJECTIVES: The industrialization process and nervous system cancer (NSC mortality in a urban region of Brazil. METHOD: From registries of the State System of Data Analysis Foundation (SEADE, 103 males deaths by NSC (ICD-9 in Baixada Santista (BS, from 1980 to 1993 were selected. Mortality ratios were calculated comparing the standardized mortality rate for ages over 10 years old (G1 and for the age group from 35 to 64 years old, in the industrialized and non-industrialized areas in three periods: 1980-1993, 1980-86, 1987-93. RESULTS: A statiscally significant high mortality was observed in the industrialized area, for ages over 10 in all periods and only from 1980 to 1993 for ages from 34 to 64. The highest mortality ratio occurred from 1980-86 for ages over 10 - 4.12 (CI 1.79-9.42. CONCLUSION: High mortality was probably related to the environmental and occupational exposure to many organic and inorganic chemical substances, considered carcinogenics, such as aliphatic and aromatic hydrocarbons, organochlorinated, formaldehyde, nitrogenated compounds and heavy metals, found in the port and industrial complex. We discuss the importance of case-control studies in characterizing the association of these and other risk factors in the determination of NSC.OBJETIVO: Estudar o processo de industrialização e a mortalidade por câncer do sistema nervoso (CSN em uma região urbana do Brasil. MÉTODO: Foram selecionados dos registros das Fundação Sistema Estadual de Análise de Dados Estatísticos (SEADE, 103 óbitos por CSN (ICD-9 ocorridos na Baixada Santista, no sexo masculino acima dos 10 anos, de 1980 a 1993. Calcularam-se as razões de mortalidade, padronizadas por idade, comparando as áreas industrializada e não industrializada, nos períodos de 1980-93, 1980-96 e 1987-93. RESULTADOS: Observou-se excesso significante de mortalidade na área industrializada para a população acima de 10 anos, em todos os períodos - 3.11 (CI 1.84-5.32, 4

  11. Toxicidade de flúor em cultivares de milho em área próxima a uma indústria cerâmica, Araras (SP Fluorine toxicity in corn plants nearby a ceramic industry, Araras, State of São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Caio Fortes

    2003-01-01

    Full Text Available Indústrias que submetem material terroso a altas temperaturas como a de cerâmicas, emitem fluoretos para a atmosfera na forma de gás, particulado ou ácido fluorídrico. Em experimentos de milho (Zea mays L., do Centro de Ciências Agrárias da Universidade Federal de São Carlos, Araras (SP, as plantas apresentaram sintomas que evoluíam de uma descoloração do limbo foliar até o secamento marginal das folhas. O objetivo deste trabalho foi avaliar os teores foliares de flúor (F na cultura do milho com sintomas de toxicidade causados por fluoretos atmosféricos emitidos por uma indústria cerâmica vizinha, e possíveis diferenças entre as cultivares de milho quanto à severidade desses sintomas. Em um experimento atribuíram-se notas relativas ao grau de injúria das folhas de 22 cultivares e, em outro, foi feita determinação de F em três cultivares de milho semeadas a 350 e 1.000 metros de distância daquela indústria. Os teores foliares de F nas folhas de milho estavam altos nas duas distâncias. Para o milho "safrinha" os teores chegaram até quatro vezes acima do teor crítico, variando entre 126 e 160 mg.kg-1. Constataram-se diferenças entre as cultivares de milho quanto à severidade de sintomas, mas não foi possível estabelecer correlação com danos na produtividade.The emission of fluoride gases, particles or fluoridric acid is commonly observed in industries that submit terrigenous materials to high temperatures, such as in the ceramic industry. Unusual abnormalities in leaves of adult plants that have been suspected to be fluorine toxicity have been observed in corn experiments carried out in the Center of Agricultural Sciences of the Federal University of São Carlos, Araras, SP, Brazil. The symptoms in the corn leaves started as discolouring of internerval cells of completed developed leaves followed by marginal burning of its tips. The objectives of this work was to evaluate the amount of fluorine (F in corn leaves

  12. Reconstructive dosimetry and radiation doses evaluation of members of the public due to radiological accident in industrial radiography; Dosimetria reconstrutiva e avaliacao de dose de individuos do publico devido a acidente radiologico em radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Camila Moreira Araujo de

    2016-07-01

    Radiological accidents have occurred mainly in the practices recognized as high risk radiological and classified by the IAEA as Categories 1 and 2, and highlighted the radiotherapy, industrial irradiators and industrial radiography. In Brazil, since there were five major cases in industrial radiography, which involved 7 radiation workers and 19 members of the public, causing localized radiation lesions on the hands and fingers. One of these accidents will be the focus of this work. In this accident, a {sup 192}Ir radioactive source was exposed for more than 8 hours in the workplace inside a company, exposing radiation workers, individuals of the public and people from the surrounding facilities, including children of a school. The radioactive source was also handled by a security worker causing severe radiation injuries in the hand and fingers. In this paper, the most relevant and used techniques of reconstructive dosimetry internationally are presented. To estimate the radiation doses received by exposed individuals in various scenarios of radiological accident in focus, the following computer codes were used: Visual Monte Carlo Dose Calculation (VMC), Virtual Environment for Radiological and Nuclear Accidents Simulation (AVSAR) and RADPRO Calculator. Through these codes some radiation doses were estimated, such as, 33.90 Gy in security worker's finger, 4.47 mSv in children in the school and 55 to 160 mSv for workers in the company during the whole day work. It is intended that this work will contribute to the improvement of dose reconstruction methodology for radiological accidents, having then more realist radiation doses. (author)

  13. Practical approach in training (on-the-job) for workers in nuclear industries; Abordagem pratica no treinamento (on-the-job) para trabalhadores em industrias nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Vianna, Vilson Bedim; Rocha, Janine Gandolpho da [Industrias Nucleares do Brasil SA, Rio de Janeiro, RJ (Brazil)

    2005-07-01

    This work approaches the 'on-the-job training' - a method of practical training - used in nuclear industries for workers who handle radioactive nuclides. The required training must, in accordance with the ISO 9000 standard, be geared to meet the needs of the organization, including the minimization of errors in operation with radionuclides, which involves various aspects (standard, social, environmental, personal and process safety etc.). Therefore, the training process must have the commitment of everybody and have a logical and documented sequence, where both the individual and the needs of the company are raised and analyzed. The clear identification of the radiological risks associated to the hands-on training is critical to the safety of who is being trained and should be part of the training content. However, the greatest challenge is a mechanism allowing to transform the hands-on training in practical learning. The role of training in the modern nuclear industry should not be restricted to provide conditions for better training or development of the employee, but also motivate the continuous improvement of the company and of the productive process.

  14. Abordagens para aplicação da estratégia de postponement: estudo multicaso em empresas da indústria de alimentos Approaches for implementation of the postponement strategy: a multicase study in the food industry

    Directory of Open Access Journals (Sweden)

    Karine Araújo Ferreira

    2013-06-01

    Full Text Available O propósito deste artigo foi investigar a aplicação prática do postponement em empresas alimentícias brasileiras e identificar as abordagens (passos para aplicação desta estratégia nestas empresas. Além da maior discussão sobre o tema, a principal motivação para este trabalho é o estudo desta estratégia em um setor em que o tema é ainda pouco explorado. Foram apresentados seis estudos de caso em empresas alimentícias do segmento de fabricação de conservas de frutas, tais como processadoras de tomate e laranja. Este trabalho traz duas contribuições principais. A primeira é a apresentação de uma estrutura conceitual, com as principais abordagens para a implementação do postponement obtidas da literatura, que pode e deve ser adequada para diferentes setores da indústria. A segunda é uma primeira adequação desse quadro para empresas da indústria alimentícia, especificamente empresas processadoras de tomates e produtoras de suco de laranja. Dentre as principais conclusões deste trabalho, pode-se destacar que a aplicação do postponement é uma prática cada vez mais frequente no segmento investigado e tem transformado as relações entre empresas. Adicionalmente, foi verificado, que nenhuma das empresas estudadas apresentava uma estrutura formalizada para aplicação da estratégia de postponement, sendo sua implantação baseada apenas na experiência dos seus gestores.The purpose of this article was to investigate the implementation of the postponement strategy of in Brazilian companies in the food industry and to identify approaches (steps for implementing this strategy in these companies. In addition to the broader discussion on this topic, the main motivation for conducting this research is the study of this strategy in a sector where this topic has still been under-addressed. Six case studies were conducted in and fruit and vegetable canning companies, such as tomato and orange processing companies. This study

  15. Brazilian soap opera and cultural industry: a brief essay about Reynaldo Gianecchini's character in Sete Pecados Telenovela Brasileira e indústria cultural: um breve ensaio sobre o personagem de Reynaldo Gianecchini em Sete Pecados

    Directory of Open Access Journals (Sweden)

    Márcio Ferreira Rodrigues Pereira

    2008-12-01

    Full Text Available The soap opera, first made in Brazil in 1951, became famous throughout time as one of the most important cultural products of our country’s television. With the analysis of a chosen case, the character “Dante” played by the actor Reynaldo Gianecchini in the Rede Globo soap opera “Sete Pecados” (2007 – 2008, supported by some theory of the mass culture, we try to launch a critical look over this powerful cultural product. But, before, with the intention of offering view of the current Brazilian TV drama, a brief history of the beginning, developing and narrative of the soap opera is presented. Keywords: Theories of mass culture. Cultural industry. Brazilian soap opera. A telenovela, surgida no Brasil em 1951, consagrou-se ao longo do tempo como um dos produtos culturais mais importantes da televisão nacional. Através da análise de um caso escolhido, o personagem “Dante”, interpretado pelo ator Reynaldo Gianecchini, da telenovela da Rede Globo Sete pecados (2007 – 2008, busca-se, com apoio em alguns teóricos da cultura de massa, lançar um olhar crítico sobre este poderoso produto cultural. Antes, porém, com o fi to de oferecer um panorama da teledramaturgia brasileira atual, apresenta-se um breve histórico sobre o surgimento, o desenvolvimento e a narrativa da telenovela. Palavras-chave: Teorias da cultura de massa. Indústria cultural. Telenovela brasileira.

  16. Silicone líquido industrial para transformar o corpo: prevalência e fatores associados ao seu uso entre travestis e mulheres transexuais em São Paulo, Brasil

    Directory of Open Access Journals (Sweden)

    Thiago Pestana Pinto

    Full Text Available O objetivo deste trabalho foi estimar a prevalência do uso de silicone líquido industrial (SLI entre pessoas travestis e mulheres transexuais e identificar os fatores relacionados a esta prática. Trata-se de estudo transversal realizado em sete municípios do Estado de São Paulo, Brasil, com dados coletados entre 2014 e 2015, em uma amostra de 576 pessoas. Na análise dos fatores associados, utilizamos o modelo de Poisson com variância robusta para estimar as razões de prevalências bruta e ajustada. A prevalência do uso de SLI foi de 49%, a média de idade para a primeira colocação de SLI foi de 22 (± 5,3 anos e aproximadamente 43% informaram a ocorrência de problemas de saúde decorrente do uso. No modelo múltiplo ter escolaridade menor que o nível superior, estar em faixa etária a partir dos 20 anos, identificar-se como travesti e exercer a prostituição foram associados positivamente com a utilização de SLI. Houve uma elevada prevalência do uso de SLI e de problemas decorrentes desta prática, indicando um desafio acerca da prevenção do uso e da redução dos danos à saúde provocados pelo SLI. Dessa forma, torna-se fundamental assegurar o acesso aos recursos necessários para a realização das modificações corporais ao longo do percurso de transição por meio de uma atenção integral à saúde das pessoas travestis e transexuais no Sistema Único de Saúde. Finalmente, incluir nas políticas de saúde as demandas por modificações corporais como parte da construção da identidade de gênero, respeitando as necessidades singulares de cada pessoa neste processo de transição.

  17. Plumbemia em trabalhadores da indústria de reciclagem de baterias automotivas da Grande Porto Alegre, RS Blood lead levels in the battery recycling industry of the metropolitan region of Porto Alegre, RS

    Directory of Open Access Journals (Sweden)

    Renato Minozzo

    2008-12-01

    Full Text Available A reciclagem de baterias pode contaminar o ar, o solo e a água, não só no lugar de processamento, mas também nas regiões circunvizinhas, sendo que os resíduos permanecem no local mesmo após o término da atividade. No presente artigo descrevemos os resultados da avaliação da plumbemia em 53 operários que trabalhavam com reciclagem de baterias automotivas e em 53 indivíduos sem história de exposição. Os dados obtidos foram comparados e discutidos em relação às normas do Ministério do Trabalho (MT e da Occupational Safety and Health Administration (OSHA. A plumbemia no sangue do grupo controle foi de 2,44±1,15 µg/dl e, no grupo exposto, de 59,43±28,34 µg/dl, sendo que 79,2% dos indivíduos mostraram níveis acima do valor de referência (até 40 µg/dl. Estudos recentes recomendam estratégias para prevenir a intoxicação com chumbo: identificação, eliminação ou controle da fonte, monitoração da exposição e respectivos danos e um programa de recompra de baterias usadas das por parte da indústria de origem.Battery recycling may contaminate soil, air and water not only at the processing site but also in the neighboring areas, inasmuch as the residues remain at the site even after the end of the activity. In the present article, we describe the results of plumbism evaluation in 53 individuals that work with car battery recycling and 53 individuals without history of lead exposure. The obtained data were compared and discussed according to the regulations of Brazilian Ministry of Labor and OSHA (Occupational Safety and Health Administration. Blood lead levels in the control group were 2.44 ± 1.15 µg/dl and 59.43 ± 28.34 µg/dl in the exposed group. 79.2 % of the individuals presented levels above the reference value (40 µg/dl. Recent studies recommend strategies to prevent lead intoxication: source identification, control or elimination, monitoring of environmental exposure and hazards and a buy-back program of used

  18. Occupational exposure prevention program to oil and gas industry; Antecipacao, reconhecimento, avaliacao e controle dos riscos ambientais em uma planta de petroleo e gas

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, Paulo Sergio de [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil); Palierini, Renato Martins [TWA Brasil, Sao Caetano do Sul, SP (Brazil)

    2005-07-01

    PETROBRAS/TRANSPETRO Pipelines and Terminals have 500 regular employees and 5.064 out sourced workers in its Southeast Division. The out sourced employees work under 125 contracts involving a wide range of activities such as maintenance, pipeline operation, pipeline launching, engineering, administrative and auxiliary services. Among these workers, 1.200 peoples are subjected to occupational exposure, which may be present in the industrial process or in the products transported in our pipelines, e.g. industrial noise, sulfidric gas, toluene, xylene and benzene (recognized as a carcinogen according to ACGIH and Brazilian Ministry of Labour). Our PPRA (acronym in Portuguese for Occupational Exposure Prevention Program) involves the workforce and fosters health by anticipation, recognition, evaluation and control of the situations that may result in injuries. Further actions include the procurement of equipment for detection of these agents not only in the air but also diluted in liquids and the introduction of state-of the- art technologies for a better process control. The priority is the acquisition of equipment for collective protection not forgetting the individual protection equipment (IPE) and the required training. Implementation of this program counted on the effective involvement of the managers, contract supervisors and HSE professionals whose main task was to advise all involved parts on the use the Risk Analysis Methods tailored for Occupational Hygiene. Furthermore, these information will be used in a info system called SD-2000 that will gather and compare Health, Hygiene e Human Resources data in order to support the professional in the management and decision making process. (author)

  19. The cogeneration as an alternative of conservation of energy or increased productivity in industrial asphalt plants; A cogeracao como alternativa de conservacao de energia ou aumento da produtividade industrial em usinas de asfalto

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Liodoro de [Universidade Federal de Itajuba (UNIFEI), Santos, SP (Brazil)], Email: mellostopa@pop.com.br; Souza, Marcelo de Oliveira e [Centrais Eletricas Brasileira S.A - ELETROBRAS, Brasilia, DF (Brazil); Mello, Eliane Stopa de

    2006-07-01

    The paper presents a detailed study on the implantation of the combined and simultaneous generation of usable energy (cogeneration) in industrial units that provide support for the flow of wealth to the country, across roads and highways, as is the case of plant Asphalt EMPAV. The study, by the sensitivity analysis of economic and financial, completed in 2004, showed the feasibility of cogeneration system for the company. The fact is that this study would not have been exhaustively discussed, otherwise would be institutional actions towards improving the completion of work. In order to resume this discussion in this article was concerned to measure the monetary losses, especially energy, during the period 2004-2006 the production of asphalt for the conventional way.

  20. 3D electrical image in area contaminated by hydrocarbons at the Cubatao, Brazil, industrial pole; Imageamento eletrico 3D em area contaminada por hidrocarbonetono no polo industrial de Cubatao - SP, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Baessa, Marcus Paulus Martins [Centro de Pesquisas e Desenvolvimento Leopoldo Americo Miguez de Mello, CENPES, Rio de Janeiro, RJ (Brazil)], E-mail: marcus.baessa@petrobras.br; Oliva, Andresa; Kiang, Chang Hung [Universidade Estadual Paulista, UNESP, Rio Claro, SP (Brazil)], E-mails: aoliva@rc.unesp.br, chang@rc.unesp.br

    2010-12-15

    This work presents the results of geophysical surveys performed over an oil contaminated site in the Polo Industrial de Cubatao - Sao Paulo. The aim is to characterize geoelectrical signatures associated to hydrocarbon presence in order to delimit and calculate the volume of the contaminated area. For this study were used Vertical Electrical Sounding (VES) and 3D Electrical Imaging for characterization of geology and geoelectrical response of the contaminant. The results showed that the hydrocarbon presence is associated to conductive anomalies due to products from biodegradation. The conductive anomalies are disseminated over the area, totalizing 1365.3 m3 volume. This volume, however, corresponds only to the residual phase contaminants, since it was not possible to map free-phase hydrocarbons. (author)

  1. ANÁLISE DE AÇÕES DE RESPONSABILIDADE SÓCIO AMBIENTAL REALIZADAS POR ORGANIZAÇÕES LOCALIZADAS EM REGIÃO CONSIDERADA PÓLO INDUSTRIAL

    Directory of Open Access Journals (Sweden)

    Andresa Cordeiro Ribeiro

    2013-12-01

    Full Text Available RESUMO:Este artigo aborda a Responsabilidades Social das Empresas (RSE na região sudeste do país. Este analisa quais as ações socioambientais que duas metalúrgicas localizada na região de polo industrial têm praticado e como estas têm refletido em sua comunidade local, bem como os benefícios que a organização têm adquirido com tal prática. Ações que nos dias de hoje são essenciais para oferecer um desenvolvimento sustentável a região, uma vez que a comunidade tem valorizado mais os serviços e produtos que estão em acordo com o meio ambiente. Desta forma, questões como ética, respeito e parcerias são discutidas ao longo do trabalho. Para fazer esta análise foram feitos revisão de literatura e estudos descritivos onde pôde-se constatar que as organizações têm se preocupado com os impactos que suas ações podem causar ao meio ambiente levando-as a darem um destino a seus resíduos de forma mais consciente.PALAVRAS-CHAVE: Responsabilidade Social, Comunidade, Ética.ABSTRACT: This article discusses the Social Responsibilities (CSR in the southeastern region of the country .This examines what environmental actions that two metals located in the industrial region have been practicing and how these are reflected in his local community as well as the benefits that the organization has gained from such practice.Shares that today are essential to deliver sustainable development in the region, since the community has reclaimed more services and products that are in accord with the environment.Therefore, issues such as ethics, respect and partnerships are discussed throughout the paper.To do this analysis, we made a literature review and descriptive studies where one may observe that organizations have been concerned with the impacts that their actions can cause to the environment causing them to give their waste to a destination in a more conscious. KEYWORDS: Social Responsibility, Community, EthicsRecebido: 21/06/2013

  2. Qualidade industrial do trigo em resposta à adubação verde e doses de nitrogênio Baking quality of wheat in response to green manure and nitrogen rates

    Directory of Open Access Journals (Sweden)

    Cilas Pinnow

    2013-01-01

    Full Text Available O objetivo deste estudo foi avaliar os efeitos de adubos verdes cultivados entre a cultura do milho e a do trigo e da adubação nitrogenada sobre a qualidade industrial do trigo. Os tratamentos consistiram de quatro níveis de adubação nitrogenada: sem adição de nitrogênio, 40, 80 e 120 kg ha-1 e seis manejos outonais: quatro com o cultivo de espécies de cobertura (ervilha forrageira, ervilhaca comum, nabo forrageiro e tremoço, um cultivo de feijoeiro com fins comerciais e outro com a permanência em pousio no período compreendido entre a colheita do milho e a semeadura do trigo. O delineamento experimental foi o de blocos ao acaso em esquema fatorial, com três repetições. O rendimento de proteína aumentou linearmente com a aplicação de nitrogênio mineral. As doses de 80 e 120 kg ha-1 de nitrogênio afetaram positivamente o desempenho dos parâmetros indicativos da qualidade industrial. A ervilha forrageira, o nabo forrageiro e a ervilhaca comum permitem combinar indíces de qualidade tecnológica ideais para panificação e satisfatórios patamares de produtividade de grãos, reduzindo a demanda de adubação nitrogenada mineral.The objective this study was to investigate the effects of green manures cultivated between the maize and wheat crop and nitrogen rates on baking quality of spring wheat. Treatments consisted of four nitrogen fertilization rates: without N addition, 40, 80 and 120 kg ha-1 using the amidic form, and six managements before wheat crop: four green manures forage pea, common pea, oilseed radish and lupine, common bean grown for commercial purposes, and the fallow between the corn harvest and wheat cropping. The experimental design was in randomized blocks and factorial scheme, with three replicates. The protein yield increased linearly with the application of mineral N rates. The nitrogen rates of 80 and 120 kg ha-1 improved the baking wheat quality. The forage pea, oilseed radish and common pea allowed ideal

  3. Qualidade industrial do trigo em resposta à adubação verde e doses de nitrogênio Baking quality of wheat in response to green manure and nitrogen rates

    Directory of Open Access Journals (Sweden)

    Cilas Pinnow

    2013-03-01

    Full Text Available O objetivo deste estudo foi avaliar os efeitos de adubos verdes cultivados entre a cultura do milho e a do trigo e da adubação nitrogenada sobre a qualidade industrial do trigo. Os tratamentos consistiram de quatro níveis de adubação nitrogenada: sem adição de nitrogênio, 40, 80 e 120 kg ha-1 e seis manejos outonais: quatro com o cultivo de espécies de cobertura (ervilha forrageira, ervilhaca comum, nabo forrageiro e tremoço, um cultivo de feijoeiro com fins comerciais e outro com a permanência em pousio no período compreendido entre a colheita do milho e a semeadura do trigo. O delineamento experimental foi o de blocos ao acaso em esquema fatorial, com três repetições. O rendimento de proteína aumentou linearmente com a aplicação de nitrogênio mineral. As doses de 80 e 120 kg ha-1 de nitrogênio afetaram positivamente o desempenho dos parâmetros indicativos da qualidade industrial. A ervilha forrageira, o nabo forrageiro e a ervilhaca comum permitem combinar indíces de qualidade tecnológica ideais para panificação e satisfatórios patamares de produtividade de grãos, reduzindo a demanda de adubação nitrogenada mineral.The objective this study was to investigate the effects of green manures cultivated between the maize and wheat crop and nitrogen rates on baking quality of spring wheat. Treatments consisted of four nitrogen fertilization rates: without N addition, 40, 80 and 120 kg ha-1 using the amidic form, and six managements before wheat crop: four green manures forage pea, common pea, oilseed radish and lupine, common bean grown for commercial purposes, and the fallow between the corn harvest and wheat cropping. The experimental design was in randomized blocks and factorial scheme, with three replicates. The protein yield increased linearly with the application of mineral N rates. The nitrogen rates of 80 and 120 kg ha-1 improved the baking wheat quality. The forage pea, oilseed radish and common pea allowed ideal

  4. Analytical strategies for uranium determination in natural water and industrial effluents samples; Estrategias analiticas para determinacao de uranio em amostras de aguas e efluentes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Juracir Silva

    2011-07-01

    The work was developed under the project 993/2007 - 'Development of analytical strategies for uranium determination in environmental and industrial samples - Environmental monitoring in the Caetite city, Bahia, Brazil' and made possible through a partnership established between Universidade Federal da Bahia and the Comissao Nacional de Energia Nuclear. Strategies were developed to uranium determination in natural water and effluents of uranium mine. The first one was a critical evaluation of the determination of uranium by inductively coupled plasma optical emission spectrometry (ICP OES) performed using factorial and Doehlert designs involving the factors: acid concentration, radio frequency power and nebuliser gas flow rate. Five emission lines were simultaneously studied (namely: 367.007, 385.464, 385.957, 386.592 and 409.013 nm), in the presence of HN0{sub 3}, H{sub 3}C{sub 2}00H or HCI. The determinations in HN0{sub 3} medium were the most sensitive. Among the factors studied, the gas flow rate was the most significant for the five emission lines. Calcium caused interference in the emission intensity for some lines and iron did not interfere (at least up to 10 mg L{sup -1}) in the five lines studied. The presence of 13 other elements did not affect the emission intensity of uranium for the lines chosen. The optimized method, using the line at 385.957 nm, allows the determination of uranium with limit of quantification of 30 {mu}g L{sup -1} and precision expressed as RSD lower than 2.2% for uranium concentrations of either 500 and 1000 {mu}g L{sup -1}. In second one, a highly sensitive flow-based procedure for uranium determination in natural waters is described. A 100-cm optical path flow cell based on a liquid-core waveguide (LCW) was exploited to increase sensitivity of the arsenazo 111 method, aiming to achieve the limits established by environmental regulations. The flow system was designed with solenoid micro-pumps in order to improve mixing and

  5. Simulating of single phase flow in typical centrifugal pumps oil industry; Simulacao do escoamento monofasico em bombas centrifugas tipicas da industria do petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Ana Carla Costa; Silva, Aldrey Luis Morais da; Maitelli, Carla Wilza Souza de Paula [Universidade Federal do Rio Grande do Norte (UFRN), RN (Brazil)

    2012-07-01

    With the various techniques applied in production processes and oil exploration, has been using the artificial lift equipment with the aim of promoting an increase in flow in oil wells and gas. Choosing the most appropriate method of elevation depends on certain factors, among them the initial costs of installation, maintenance and conditions in the producing field, resulting in a more precise analysis of the project. Although there are other methods that represent a low cost and easy maintenance, the BCS method (Electrical Submersible Pumping), appears to be quite effective when it is intended to pump more flow of liquids from both terrestrial and marine environments, in conditions adverse temperature, presence of free gas in the mixture and viscous fluids. This method is based in most cases where the vessel pressure was low, and the fluid does not reach the surface without intervention of an artificial means which can lift them. Similar happens at the end of productive life of a resurgence for the well, or even when the flow of it is far below what is expected to produce, requiring a complement of natural energy through artificial lift. By definition, the BCS is a method of artificial lift in which a subsurface electric motor turns electrical energy into mechanical centrifugal pump and a multistage overlapping converts mechanical energy into kinetic energy of the engine bringing the fluid surface. In this study we performed computer simulations using a commercial program ANSYS #Registered Sign# CFX #Registered Sign# dimensions previously obtained by the 3D geometry in CAD format, with the objective of evaluating the single-phase flow inside typical centrifugal pump submerged in the oil industry. The variable measured was the height of elevation and drilling fluids are oil and water.(author)

  6. Correlações canônicas de características agroindustriais em cana-deaçúcar = Canonical correlations of agro-industrial characteristics in sugarcane

    Directory of Open Access Journals (Sweden)

    José Wilson da Silva

    2007-07-01

    Full Text Available A análise de correlações canônicas mede a existência e a intensidade da associação entre dois grupos de variáveis ou caracteres de importância. Este trabalho teve como objetivo estimar a intensidade de associação entre os grupos de caracteres agronômicos e industriais em cana-de-açúcar. Pela análise de correlações canônicas, ficouevidenciado que clones com maior número de touceiras por parcela e maior número de colmos por touceira tendem a proporcionar um aumento na produção de cana (TCH, e para incrementar o rendimento de TCH, brix e a pol% devem ser selecionados clones baixos, com maior diâmetro, maior número de colmos por touceiras.The analysis of canonical correlations measures the existence and the intensity of the association between two groups of variables or characters of importance. This study aimed to estimate the intensity in the association between the agronomic and industrial characters in sugarcane. The analysis of canonic correlations allowed to conclude that clones with bigger number of stalks per parcel, greater number of stalks per stool tend to provide an increase in the TCH production. Another conclusion was that shorter clones with largerdiameter, greater number of stalks per stool and plants, are determinant in increasing TCH, brix and pol% characteristics.

  7. Pedras sobre vidas: vítimas e viúvas na indústria de mármore em Itaoca (ES Stones crushing lives: victims and their widows in the marble industry in Itaoca (ES

    Directory of Open Access Journals (Sweden)

    Maria das Graças Barbosa Moulin

    2008-08-01

    Full Text Available Este texto apresenta, em estudo etnográfico, impactos sociais gerados para famílias de trabalhadores vítimas de acidentes de trabalho fatais no setor de rochas ornamentais em Itaoca, distrito de Cachoeiro do Itapemirim (ES. Analisaram-se os núcleos de sentido: cultura familiar; vivência dos acidentes fatais; experiências de lutos familiares; modo de agir da empresa e do sindicato em relação aos direitos; recursos materiais, simbólicos e afetivos usados pelas famílias para enfrentar adversidades decorrentes do acidente. A gestão autoritária, baseada no apelo à virilidade e na improvisação, propicia a ocorrência de acidentes. Necessidades de subsistência, valorização do trabalho como atributo de honradez e ausência de outras opções contribuem para sujeitar os trabalhadores. A maioria das viúvas encontra na fé religiosa, na solidariedade da família e da comunidade e na assistência prestada pelo sindicato, apoio afetivo, simbólico e material. Constata-se omissão dos empresários e ausência de proteção do poder público às famílias. Apontam-se avanços na organização dos trabalhadores em sindicato e mudanças positivas promovidas por empresários do setor, premidos pelos critérios exigidos para exportação.This text based on an ethnographic survey presents the social impact on the families of victims of fatal work accidents in the ornamental stone industry in Itaoca, district of Cachoeiro de Itapemirim, Espírito Santo, Brazil. The following elements are analyzed: family culture; living with fatal accidents; experiences of family grief; the way the companies and the union deal with worker rights; material, symbolic, and emotional resources used by the families to face hardship caused by accidents. Authoritarian management appealing to masculinity and improvisation are factors that favor work accidents. The need to earn their living, the fact of valuing work as an attribute of honorableness and lack of options

  8. Profundidade de instalação da linha de gotejadores em tomateiro para processamento industrial Drip line placement depth for processing tomatoes crop

    Directory of Open Access Journals (Sweden)

    Waldir A. Marouelli

    2002-06-01

    Full Text Available Avaliou-se a resposta do tomateiro para processamento industrial, irrigado por gotejamento, a diferentes profundidades de instalação da linha lateral de gotejadores (0; 20 e 40 cm. Um tratamento irrigado por aspersão foi utilizado como controle. O experimento foi conduzido na Embrapa Hortaliças, nas condições edafoclimáticas da região de cerrados do Brasil Central. Maior crescimento vegetativo de plantas foi observado nos tratamentos irrigados por aspersão e gotejamento superficial, enquanto que menor crescimento ocorreu no gotejamento a 40 cm. A produtividade comercial do tratamento irrigado por gotejamento superficial (124 t.ha-1 foi 32% maior que no tratamento por gotejamento subterrâneo a 40 cm, 15% maior que no tratamento irrigado por aspersão, não diferindo (p>0,05 do tratamento por gotejamento a 20 cm. Incrementos de produtividade foram devidos, principalmente, ao maior número de frutos por planta, uma vez que o estande final e a massa média de frutos não foram afetados pelos tratamentos. A incidência de frutos podres na irrigação por aspersão foi 112 e 453% maior que nos tratamentos irrigados por gotejamento superficial e subterrâneo, respectivamente.A field experiment was carried out at Embrapa Hortaliças under soil and climate conditions of Central Brazil "cerrado" region, aiming to evaluate the response of drip-irrigated processing tomatoes to different drip line placement depths (0; 20 and 40 cm. A control treatment was irrigated by sprinkle system. Larger plant vegetative growth was observed for the sprinkle and surface drip treatments, while smaller growth occurred for the 40 cm-depth drip treatment. Marketable yield of the surface drip irrigated treatment (124 t.ha-1 was 32% larger than the 40 cm-depth drip treatment, 15% larger than the sprinkle treatment, but did not differ (p>0,05 from the 20 cm-depth drip treatment. Yield increments were basically due to a larger number of fruits per plant, since final

  9. Influência da embalagem e estocagem no conteúdo de betacaroteno e ácido ascórbico em suco de manga “Ubá” industrializado = Influence of package and storage on the content of beta-carotene and ascorbic acid in industrialized “Ubá” mango juice

    Directory of Open Access Journals (Sweden)

    Daniela da Silva Oliveira

    2010-07-01

    Full Text Available Este trabalho investigou o conteudo e avaliou a estabilidade de doisantioxidantes naturais - β-caroteno e acido ascorbico (AA - em suco de manga "Uba" industrializado e armazenado em diferentes tempos de estocagem e correlacionou as recomendacoes de vitaminas A e C com o teor encontrado nos sucos. O β-caroteno e o AA foram analisados nos sucos comercializados em embalagem tetra pak, em cinco tempos de estocagem (1 a 5 meses e em embalagem de vidro, em tres tempos de estocagem (apos 3, 4 e 5 meses de armazenamento. A analise foi realizada por Cromatografia Liquida de Alta Eficiencia (CLAE. Nao foram detectadas diferencas estatisticamente significativas (α = 5% entre os diferentes tempos de estocagem, para ambos os componentes analisados, tanto em embalagens tetra pak quanto em embalagens de vidro. Alem disso, nao foram observadas diferencas significativas entre o conteudo de β-caroteno dos sucos comercializados nas duas embalagens. No entanto, houve diferenca significativa no teor de AA entre as diferentes embalagens, e a embalagem de vidro apresentou maior teor em relacao a embalagem tetrapak. Assim, as perdas ocasionadas especialmente pela permeabilidade da embalagem ao oxigenio deveriam ser alvo de atencao das industrias de alimentos.This work investigated the content and stability of two natural antioxidants . β-carotene and ascorbic acid (AA - in mango juice industrialized and stored during different storage times, correlating the recommendations of vitamins A and C with the content found in the juice. β-carotene and AA were analyzed in juice sold in tetra pak packaging, during five storage times (1 to 5months and in glass containers, during three storage times (after 3, 4 and 5 months of storage. The analysis was carried out using High Performance Liquid Chromatography (HPLC. No statically differences (α = 5 % were found between the different times of storage for both compounds analyzed, both in tetra pak package and glass container

  10. QFD na garantia da qualidade do produto durante seu desenvolvimento: caso em uma empresa de materiais QFD for quality assurance during product development: a case in a materials industry

    Directory of Open Access Journals (Sweden)

    Leonel Del Rey de Melo Filho

    2007-12-01

    Full Text Available Este artigo apresenta uma aplicação do método QFD em uma empresa de materiais. A intervenção foi para garantia da qualidade de um produto durante seu redesenvolvimento, em atendimento ao desejo do cliente único de ter uma característica do produto aumentada, sem prejuízo a outras. Foram efetuados dois desdobramentos associados: qualidade positiva e tecnologia do processo. A estratégia de pesquisa adotada foi a de pesquisa-ação. Utilizou-se também um guia para intervenção do QFD. O desdobramento da tecnologia mostrou como alterações na tecnologia de fabricação afetam os índices de controle do processo (foco cliente interno; enquanto o desdobramento da qualidade revelou como essas mesmas alterações afetam a qualidade do produto final (foco cliente externo. A técnica de planejamento e análise de experimentos auxiliou na definição das intervenções no processo e na definição de correlações. Foram levantados alguns aspectos não contemplados pelo guia de intervenção do QFD, bem como tópicos para pesquisas futuras.The article presents an application of QFD method in a materials industry. The intervention aimed at quality assurance of a product during its redevelopment, in order to respond to the desire of product client of having a quality characteristic enhanced without jeopardizing others. Two deployments were carried out in association: positive quality and process technology. This study was conducted by means of action-research. It also employed an intervention guide for QFD studies. The technology deployment showed how alterations in process technology affect process control parameters (a focus on internal client; whereas, the quality deployment revealed how these same alterations affect the final product quality (a focus on external client. Planning and Analysis of Experiments showed to be helpful in defining interventions in the process and in establishing correlations. The article ends by pointing out some

  11. Inovação na indústria química e biotecnológica em saúde: em busca de uma agenda virtuosa Innovación en la industria química y biotecnológica en salud: en busca de una agenda virtuosa Innovation in pharmaceutical and health biotechnology industries: challenges for a virtuous agenda

    Directory of Open Access Journals (Sweden)

    Marco Vargas

    2012-12-01

    Full Text Available As indústrias de base química e biotecnológica compõem um dos subsistemas produtivos do Complexo Produtivo da Saúde, que se destaca tanto pela sua relevância econômica como pela sua importância no domínio de novas tecnologias em áreas estratégicas. A consolidação do segmento de produção de medicamentos genéricos na última década proporcionou um aumento significativo da participação de empresas nacionais no mercado farmacêutico e representou um importante ponto de inflexão na trajetória de crescimento do setor. Entretanto, ainda há importantes gargalos estruturais tanto na base produtiva como em termos de seu dinamismo inovativo. Tais gargalos revelam a elevada vulnerabilidade do Sistema Nacional de Saúde e apontam para a importância da criação e implementação de políticas públicas que articulem o desenvolvimento da base produtiva e da inovação na indústria farmacêutica com o atendimento das demandas sociais relativas à saúde no País.Las industrias basadas en química y biotecnología componen uno de los subsistemas productivos del Complejo Productivo de la Salud Brasileña que se destaca tanto por su relevancia económica, como por su importancia en el dominio de nuevas tecnologías en áreas estratégicas. La consolidación del segmento producción de medicamentos genéricos en la última década proporcionó un aumento significativo de participación de empresas nacionales en el mercado farmacéutico y representó un importante punto de inflexión en la trayectoria de crecimiento del sector. Sin embargo, hay aún importantes golletes estructurales tanto en la base productiva como en términos del dinamismo innovador. Tales fallas revelan la elevada vulnerabilidad del Sistema Nacional de Salud en Brasil y apuntan a la importancia de la creación e implementación de políticas públicas que articulen el desarrollo de la base productiva y de la innovación en la industria farmacéutica con la atención de

  12. Net Energy, CO2 Emission and Land-Based Cost-Benefit Analyses of <em>Jatropha> em>Biodiesel: A Case Study of the Panzhihua Region of Sichuan Province in China

    Directory of Open Access Journals (Sweden)

    Xiangzheng Deng

    2012-06-01

    Full Text Available Bioenergy is currently regarded as a renewable energy source with a high growth potential. Forest-based biodiesel, with the significant advantage of not competing with grain production on cultivated land, has been considered as a promising substitute for diesel fuel by many countries, including China. Consequently, extracting biodiesel from <em>Jatropha> curcasem> has become a growing industry. However, many key issues related to the development of this industry are still not fully resolved and the prospects for this industry are complicated. The aim of this paper is to evaluate the net energy, CO2 emission, and cost efficiency of <em>Jatropha> biodiesel as a substitute fuel in China to help resolve some of the key issues by studying data from this region of China that is well suited to growing <em>Jatropha>. Our results show that: (1 <em>Jatropha> biodiesel is preferable for global warming mitigation over diesel fuel in terms of the carbon sink during <em>Jatropha> tree growth. (2 The net energy yield of <em>Jatropha> biodiesel is much lower than that of fossil fuel, induced by the high energy consumption during <em>Jatropha> plantation establishment and the conversion from seed oil to diesel fuel step. Therefore, the energy efficiencies of the production of <em>Jatropha> and its conversion to biodiesel need to be improved. (3 Due to current low profit and high risk in the study area, farmers have little incentive to continue or increase <em>Jatropha> production. (4 It is necessary to provide more subsidies and preferential policies for <em>Jatropha> plantations if this industry is to grow. It is also necessary for local government to set realistic objectives and make rational plans to choose proper sites for <em>Jatropha> biodiesel development and the work reported here should assist that effort. Future research focused on breading high-yield varieties, development of efficient field

  13. Avaliação de óleos essenciais de plantas aromáticas com atividade inseticida em Triatoma infestans (Klug, 1834 (Hemiptera: Reduviidae = Evaluation of essential oils with insecticidal activity in Triatoma infestans (Klug, 1834 (Hemiptera: Reduviidae

    Directory of Open Access Journals (Sweden)

    Suellem Petilim Gomes

    2011-07-01

    Full Text Available A doenca de Chagas e um dos maiores problemas de saude publica na America Latina. Neste trabalho, foi avaliada a acao inseticida de oleos essenciais de Anacardium humile Cymbopogon nardus, Ocimum basilicum e Eucalyptus urograndis em ninfas do 3‹ e 4‹ estadios dedesenvolvimento de Triatoma infestans por acao topica e pressao a vapor (fumigacao. Para o teste topico foram realizadas duas repeticoes cada uma com cinco ninfas de 3‹ e 4‹ estadios de desenvolvimento de T. infestans. Foi aplicado 1ƒÊL de cada concentracao na regiao dorsal de cada individuo. Para o teste de fumigacao foram utilizados potes de 2 L com tampa vedante. Os oleos essenciais de O. gratissimum e E. urograndis apresentaram atividadeinseticida para T. infestans, e A. humile e C. nardus apresentaram em media 5 e 15% de mortalidade, respectivamente. Para fumigacao, somente o oleo de E. urograndis teve efeito, com 100% de mortalidade sobre T. infestans , sendo que para os outros oleos nao foiobservado efeito de fumigacao. Esse trabalho relata pela primeira vez a acao inseticida de E. urograndis em potes fumigenos para o controle de triatomineos. Os resultados sao importantes devido a busca por novos modelos moleculares com acao inseticida em triatomineos resistentes aos inseticidas sinteticos.Chagas disease is a major public health problem in Latin America. This work aimed to evaluate the insecticide action of essential oils of Anacardium humile, Cymbopogon nardus, Ocimum basilicum and Eucalyptus urograndis on Triatoma infestans nymphs of third and fourth stages of development by topic action and steam pressure (fumigation. Two repetitions were performed at the topic test with five nymphs of third and fourth stages of development of T. infestans. It was applied 1ƒÊL of each concentration on the dorsal region of each nymph. Two-liter pots with sealing covers were used at the fumigation test. The essential oils of O. gratissimum and E. urograndis showed insecticidal

  14. Analysis of the natural gas market in Fortaleza metropolitan region (Brazil); Analise do mercado de gas natural na regiao metropolitana de Fortaleza

    Energy Technology Data Exchange (ETDEWEB)

    Barroso, Carlos Andre M.; Rabelo, Clarice A.C.; Santana, Lana L.P.; Sucupira, Marcos L.L. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil)

    2004-07-01

    Natural gas has become one of the most important energy sources, as we can observe in most countries' energy sector, where its presence is very significant. In Brazil, natural gas corresponds to 7,5% of all energy Also available, and the government has plans to increase this number to 12% until 2010. However, in order to reach this goal, it is important to understand how market works, evaluating all the aspects that have some influence on it. This paper goal is to analyze the natural gas market in Fortaleza metropolitan region, emphasizing the industrial sector, the biggest consumer in Ceara State. The main aspects are characterized here, like professionals qualification in the area, service quality, from equipment and maintenance suppliers until gas distributors, legal aspects, and other factors that are also relevant to a possible future expansion of different natural gas market segments (industry, residence, commerce and transport). (author)

  15. Evaluation of <em>HER2em> Gene Amplification in Breast Cancer Using Nuclei Microarray <em>in em>S>itu em>Hybridization

    Directory of Open Access Journals (Sweden)

    Xuefeng Zhang

    2012-05-01

    Full Text Available Fluorescence<em> em>>in situ em>hybridization (FISH assay is considered the “gold standard” in evaluating <em>HER2/neu (HER2em> gene status. However, FISH detection is costly and time consuming. Thus, we established nuclei microarray with extracted intact nuclei from paraffin embedded breast cancer tissues for FISH detection. The nuclei microarray FISH (NMFISH technology serves as a useful platform for analyzing <em>HER2em> gene/chromosome 17 centromere ratio. We examined <em>HER2em> gene status in 152 cases of invasive ductal carcinomas of the breast that were resected surgically with FISH and NMFISH. <em>HER2em> gene amplification status was classified according to the guidelines of the American Society of Clinical Oncology and College of American Pathologists (ASCO/CAP. Comparison of the cut-off values for <em>HER2em>/chromosome 17 centromere copy number ratio obtained by NMFISH and FISH showed that there was almost perfect agreement between the two methods (κ coefficient 0.920. The results of the two methods were almost consistent for the evaluation of <em>HER2em> gene counts. The present study proved that NMFISH is comparable with FISH for evaluating <em>HER2em> gene status. The use of nuclei microarray technology is highly efficient, time and reagent conserving and inexpensive.

  16. EVALUACIÓN DE PRERREQUISITOS EN EL SISTEMA HACCP EN EMPRESAS DEL SECTOR AGROALIMENTARIO AVALIAÇÃO DE PRERREQUISITOS NO SISTEMA HACCP EM EMPRESAS DO SETOR AGROALIMENTAR EVALUATION OF PREREQUISITES IN HACCP SYSTEM IN AGRO-FOOD INDUSTRY

    Directory of Open Access Journals (Sweden)

    Nelson Gutiérrez

    2011-06-01

    Full Text Available En este artículo se presenta un diagnóstico de la gestión de la higiene basado en el cumplimiento de los prerrequisitos de un sistema HACCP, en 53 empresas del sector agroalimentario que operan en el departamento del Huila en Colombia. La metodología de evaluación correspondió a la verificación del cumplimiento de las listas de chequeo de dos instrumentos: GHYCAL (Gestión de la Higiene y Calidad y S&Q (Safety and Quality on Food. Los resultados permitieron encontrar niveles de gestión de la higiene en una escala porcentual y clasificar 34 empresas en nivel de cumplimiento bajo, que incluye niveles entre el 0 % y el 75 %; 12 empresas en nivel de cumplimiento básico, al obtener valoraciones entre el 75 % y el 95 %, y 7 empresas con nivel de cumplimiento superior, por resultar con evaluaciones superiores al 95 %; adicionalmente se valoraron similitudes y diferencias entre empresas y entre sectores estudiados, haciendo uso de técnicas de estadística multivariada.Neste artigo apresenta-se um diagnóstico da gestão da higiene baseado no cumprimento dos prerrequisitos do sistema HACCP, em 53 empresas do setor agroalimentar que operam no departamento do Huila, na Colombia. A metodologia de avaliação correspondeu a verificação do cumprimento das listas de verificação de dois instrumentos: GHYCAL (Gestáo da Higiene e Qualidade e S&Q (Safety and Quality on Food. Os resultados permitiram achar níveis da gestáo da higiene em uma escala percentual e classificar 34 empresas no nível baixo de cumprimento, que inclui níveis entre 0 % e 75 %; 12 empresas com nível de cumprimento básico, com valoragoes entre 75 % e 95 %, e 7 empresas com nível de cumprimento superior, com avaliagoes acima do 95 %; adicionalmente, foram valorizadas as semelhangas e as diferengas entre as empresas e os setores estudados, utilizando técnicas da estatística multivariada.This paper presents an analysis of the hygiene management based on the compliance with

  17. Reaproveitamento de resíduo sólido proveniente do setor siderúrgico em cerâmica vermelha Utilization of solid waste from siderurgical industry in red ceramic

    Directory of Open Access Journals (Sweden)

    G. E. Oliveira

    2004-06-01

    Full Text Available Este trabalho mostra os resultados de um estudo sobre a incorporação de resíduo sólido proveniente do setor siderúrgico na formulação de uma massa argilosa utilizada na fabricação de cerâmica vermelha. As massas preparadas continham os seguintes teores de resíduo de siderurgia: 0; 0,5; 1,0; 1,5; 2,0; 2,5 e 3,0% em peso. Os resultados de difração de raios X, distribuição de tamanho de partículas e limites de Atterberg são apresentados para as massas argilosas. Os corpos-de-prova foram conformados por extrusão a vácuo e queimados nas temperaturas de 850 ºC, 900 ºC, 950 ºC, 1000 ºC e 1050 ºC. As propriedades físico-mecânicas foram determinadas em função da temperatura de queima e do conteúdo de resíduo de siderurgia. Os resultados obtidos indicaram que o resíduo sólido de siderurgia adicionado modificou as características físico-químicas e, também, as propriedades da massa argilosa pura. As massas cerâmicas contendo resíduo de siderurgia têm potencial para serem empregadas na fabricação de produtos de cerâmica vermelha para a construção civil.This work presents the results of a study on the incorporation of solid waste from siderurgical industry in the formulation of a clayey mass used in the production of red ceramics. The prepared masses contained the following amounts of siderurgy waste: 0, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0wt%. The results of X-ray diffraction, granulometry and Atterberg's limits are presented for the ceramic masses. Test specimens were conformed by vacuum extrusion and fired at temperatures of 850 ºC, 900 ºC, 950 ºC, 1000 ºC and 1050ºC. The physical-mechanical properties were determined as a function of firing temperature and content of siderurgy waste. The results indicate that the addition of siderurgy solid waste modify the physic-chemical characteristics of the clayey mass and the ceramic properties of the test specimens. The results suggest also that the ceramic masses

  18. Fatores associados à síndrome metabólica em trabalhadores administrativos de uma indústria de petróleo Factors associated with metabolic syndrome in administrative workers in the oil industry

    Directory of Open Access Journals (Sweden)

    Elizabeth Regina Torres Felipe-de-Melo

    2011-08-01

    Full Text Available Estudo transversal com o objetivo de identificar os fatores associados à síndrome metabólica (SM em trabalhadores administrativos de uma indústria de petróleo. Avaliou-se 1.387 trabalhadores, incluindo dados antropométricos, bioquímicos, estilo de vida, características demográficas e socioeconômicas. Determinou-se a SM segundo a I Diretriz Brasileira de Diagnóstico e Tratamento da Síndrome Metabólica. Os fatores associados à SM foram examinados por modelos de regressão logística univariado e multivariado. 15% dos trabalhadores apresentaram a SM. Na análise multivariada, o sexo (OR=3,4;IC 95% 2,1-5,5, a idade (OR=3,8;IC 95% 1,5-9,4 e o tabagismo (atual e passado (OR=1,6;IC 95% 1,2-2,3, foram associados à SM. Conclui-se que a prevalência da SM nestes trabalhadores é elevada, especialmente em homens, tabagistas ou ex-tabagistas e com idade acima de 40 anos. Possivelmente, o maior valor deste diagnóstico foi possibilitar a identificação de trabalhadores com alterações metabólicas extremas, que justifiquem intervenções imediatas para redução dos fatores de risco identificados. Nesse sentido, ações que objetivam a promoção de estilo de vida saudável, poderão ser desenvolvidas pelas empresas, visando a contribuir para a melhoria das condições de saúde dos empregados.This is a cross-sectional study seeking to identify the factors associated with metabolic syndrome in administrative workers of an oil company. A total of 1,387 workers were examined, including their anthropometric and biochemical data, lifestyle, demographic and socioeconomic characteristics. Metabolic syndrome was defined in accordance with the First Set of Brazilian Guidelines for the Diagnosis and Treatment of Metabolic Syndrome. Factors associated with MS were examined by univariate and multivariate logistic regression models and 15% of the workers had MS symptoms. Multivariate analysis revealed that gender (OR=3.4; IC 95% 2.1- 5.5, age (OR=3

  19. A New Natural Lactone from <em>Dimocarpus> <em>longan> Lour. Seeds

    Directory of Open Access Journals (Sweden)

    Zhongjun Li

    2012-08-01

    Full Text Available A new natural product named longanlactone was isolated from <em>Dimocarpus> <em>longan> Lour. seeds. Its structure was determined as 3-(2-acetyl-1<em>H>-pyrrol-1-yl-5-(prop-2-yn-1-yldihydrofuran-2(3H-one by spectroscopic methods and HRESIMS.

  20. U-Pb age in zircon of intrusive granite at Acopiara complex, Crystal region, domain Central Ceara, Brazil; Idade U-PB em zircao de granito intrusivo no Complexo Acopiara, Regiao de Cristais, Dominio Ceara Central

    Energy Technology Data Exchange (ETDEWEB)

    Neri, T.F.O.; Hamelak, G.M.S.; Azevedo, L.R.; Mattos, I.C.; Verissimo, C.U.V.; Nogueira Neto, J.A., E-mail: neri@ufc.br [Universidade Federal do Ceara (UFC), Fortaleza (Brazil). Departamento de Geologia; Lima, M.N. [Universidade Federal de Goias (UFGO), Goiania, GO (Brazil). Curso de Geologia

    2015-07-01

    Granitic body mineralogically composed by two micas, located at Crystal region, Ceara Central domain and intruded into lithotypes from Acopiara complex, provided an age of ∼526 Ma, indicating important period of magma generation of granitic composition associated with crustal anatexia, during Paleozoic.

  1. Alpha radioactivity monitoring related to Radon-222 in water from wells in metropolitan area of Curitiba (PR), Brazil; Monitoramento da radioatividade alfa relacionada ao radonio-222 em aguas de pocos da regiao metropolitana de Curitiba (PR)

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Janine Nicolosi; Paschuk, Sergei Anatolyevich; Kappke, Jaqueline; Claro, Flavia Del; Perna, Allan Felipe Nunes; Reque, Marilson, E-mail: janine_nicolosi@hotmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Denyak, Valeriy; Schelin, Hugo Reuters [Instituto de Pesquisa Pele Pequeno Principe (IPPPP), Curitiba, PR (Brazil); Rocha, Zildete; Santos, Talita Oliveira [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-04-15

    This research objective was to assess the level of randon-222 concentration in well water of the metropolitan region of Curitiba, Parana. Current work presents the results of indoor {sup 222}Rn activity ground water samples from artesian wells from aquifers of the region. The studies of radon activity in water were performed using the radon detector AlphaGUARD. The calculations of initial radon activity in water were done considering the {sup 222}Rn decay correction as well as equilibrium level of {sup 222}Rn and {sup 226}Ra observed after 30 days of measurements. Obtained results show that about 70% of measured activity levels of {sup 222}Rn are higher than the recommended value of 11.1 Bq.L{sup -1}, which represent the risk for the human health associated with this radionuclide. The case study showed that previous measurements of radon are recommended for a construction project is implemented. In this case, it is observed that the radon concentrations decrease about 56% in the first water tank and 83% in the second water tank over the well. This fact shows that the actions for mitigation of radon are viable and do not require major modifications to the usual systems of construction. (author)

  2. Radon and radon daughters' concentration in spring and wells waters from Presidente Prudente: preliminary results; Concentracao de Rn-222 e filhos em aguas provenientes de pocos e emergencias de agua da regiao de Presidente Prudente: resultados preliminares

    Energy Technology Data Exchange (ETDEWEB)

    Osorio, Ana Maria Araya; Saenz, Carlos Alberto Tello [Universidade Estadual Paulista Julio de Mesquita Filho (FCT/UNESP), Presidente Prudente, SP (Brazil). Departamento de Fisica Quimica e Biologia; Aguiar, Claudinei Rodrigues de [Universidade Tecnologica Federal do Parana (UTFPR), PR (Brazil); Pereira, Luiz Augusto Stuani [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Presidente Prudente, SP (Brazil)

    2009-07-15

    This work presents the preliminary results about the concentration of radon and radon daughters in wells and springs water from Presidente Prudente. Six water samples were studied: three from well-water, two from springs water and one from potable water. For the determination of α-activity the samples were placed inside plastic containers where the CR-39 tracks detectors were outside the water. The track density of α-particles were measured by using optical microscopy. The results show that one sample from well-water presented higher concentration of radon and radon daughters than the other samples. (author)

  3. Chemical signature study of tupiguarani ceramic tradition from Central region of the Rio Grande do Sul state, Brazil; Estudo de assinaturas quimicas em ceramica da tradicao tupiguarani da regiao central do estado do Rio Grande do Sul, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Bona, Irene Akemy Tomiyoshi

    2006-07-01

    In this work a model based on experimental results using chemical composition data of the pottery sherds applied to Spearmann's no parametric test, principal component analysis and discriminant analysis, was applied. The samples are soils and Tupiguarani Tradition pottery sherd from the central area of the Rio Grande do Sul State. The chemical elements , Al, Ba, Ca, Cr, Fe, K Mn, Pb, Rb, S, Si, Sr, Ti, V and Zn were determined by energy dispersive X-ray fluorescence (EDXFR) while Ce, Cu, Gd, La, Nd, Pr, Sm, Th and Y by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) techniques. Relationships among the pottery characteristics, studied sites and sherd dispersion in the several sites were proposed. Indications of chemical signature of the small pottery with function to go or not to the fire were observed. The largest dispersion is of small pottery with surface treatment no corrugated. The potteries chemical fingerprints from Ijui River, Ibicui-Vacacai Mirim River and Jacui River were verified. (author)

  4. Electric power generation using biomass gasification systems in nature in isolated communities of the Amazon region: project GASEIBRAS; Geracao de eletricidade utilizando sistemas de gaseificacao de biomassa in natura em comunidades isoladas da regiao amazonica: projeto GASEIBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Suani Teixeira; Velazquez, Silvia M. Stortini Goncalves; Santos, Sandra M. Apolinario dos; Lora, Beatriz Acquaro [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Centro de Referencia Nacional em Biomassa], e-mails: suani@iee.usp.br, sgvelaz@iee.usp.br, sandra@iee.usp.br, blora@iee.usp.br

    2006-07-01

    This paper will present the pioneering project of electric energy generation from renewable sources 'GASEIBRAS - Nationalization of the Biomass Gasification Technology and Formation of Human Resources in the Amazon Region', recently approved by the National Advice of Scientific and Technological Development (CNPq) and for the Ministry of Mines and Energy (MME). The GASEIBRAS project intends to use the experience previously acquired in the project GASEIFAMAZ - Comparison between Existing Technologies of Biomass Gasification in Brazil and Exterior and Formation of Human Resources in the North Region, sponsored by FINEP/CTENERG, to develop and construct a 20 kWe biomass gasification system, with total national technology, easy to operate and to maintain, and fed with local available biomass residues. Apart from contributing for the development of the national technology, this project will provide the sustainable development of the isolated communities in the Amazon region. The ongoing development of this project will enable to consolidate the national biomass gasification technology for electricity generation. The implemented prototype will allow the response of this project in other regions of the country, due its tailor made characteristic to attend to small isolated communities, thus supplying decentralized energy from renewable sources, to Amazon region. (author)

  5. Uranium, radon-222 and polonium-210 in drinking waters from metropolitan area of Recife, PE, Brazil; Uranio, radonio-222 e polonio-210 em aguas de abastecimento publico da regiao metropolitana do Recife

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Cleomacio Miguel da

    2000-04-01

    There is only scarce information on the presence of radionuclides in water for public consumption in Brazil. A recently issued federal regulation requires that waters from public supplies be screened to determine their content of alpha and beta emitters. In order to comply with this requirement the present work was carried out with the purpose of determining the concentration of natural uranium, {sup 222} Rn and {sup 210} Po in water supplies in the metropolitan region of Recife, Brazil. The analyses were performed in 17 points of supply of superficial water and 94 points of groundwater supply. The concentrations of uranium were determined by the fluorimetric method, whereas the liquid scintillation method was used to determine the concentration of {sup 222} Rn. Polonium-210, on the other hand, was determined by alpha spectrometry, following its spontaneous deposition on copper disks. The water analyzer presented uranium concentrations varying from 35.3 to 1146.5 mBq/L for superficial resources and from 20.2 to 919.15 mBq/L for underground sources. The concentration of uranium in superficial water showed significant correlation with some parameters such as conductivity, alkalinity and total hardness, as well as, with the concentrations of Ca, Mg, Cl, K, SO{sub 4} and Mn. No correlation, however, was shown with the concentrations of Fe, NO{sub 2} and NO{sub 3}. The concentrations of {sup 222} Rn varied from 5.3 to 83.7 Bq/L in the groundwater analyzer. Radon concentration was not measured in superficial water due to the high emanation rate of radon in open air conditions. As far as {sup 210} Po is concerned, the analyses showed concentrations ranging from <22 mBq/L (the lowest limit of detection) to 57.4 mBq/L for superficial water and from <22 to 813 mBq/L for ground water samples. The concentrations of {sup 210} Po did not show and correlation with physico-chemical parameters. The average concentrations of uranium and {sup 210} Po in superficial water were of 44.7 mBq/L, respectively. These values correspond to effective doses of 5.8 x 10{sup -4} mSv/yr and 4.5 x 10{sup -2} mSv/yr, for uranium and {sup 210} Po, respectively. The average values for the concentrations of uranium, {sup 222} Rn and {sup 210} Po in ground samples, on the other hand, were 106.6 mBq/L, 24,3 Bq/L and 30 mBq/L, respectively, corresponding to effective doses of 8.0 x 10{sup -4} mSv/yr, 1.3 mSv/yr and 0.47 mSv/yr, respectively. (author)

  6. Evaluation of {sup 137}Cs mobility in soil profiles from the Pantanal region, Brazil; Avaliacao da mobilidade do {sup 137}Cs em perfis de solos da regiao do Pantanal

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Fernanda Leite da

    2013-07-01

    Radioactive pollutants can cause impact on the environmental quality of soils and pose a risk to human health. The release of radioactive materials through nuclear testing or nuclear accidents cause the deposition of radionuclides on the ground,· it may be leached by rain, transported to the sources of natural waters and absorbed by the soil fauna and flora, and thus enter the human food chain. Radioecological studies have shown that soils with low pH, low organic matter content and low fertility are more vulnerable to contamination by {sup 137}Cs, since the transfer to plants is high. In this study, we aimed to assess and map the vulnerability to contamination by {sup 137}Cs surface horizons of the soils from the Pantanal and propose mitigation measures adapted to the regional scenario to optimize radiological protection of agricultural areas. Therefore, selected soil profiles located in the municipality of Jaraguari, state of Mato Grosso do Sul, and applied the conceptual model developed by Picanco Jr (2012), which was used in the reference values of the factor of soil-plant transfer (FT) for {sup 137}Cs in corn, related soil variables (pH, CTC and exchangeable K) and relevance of parameters and variations of amplitudes for each value range of FT. The application of this conceptual model established to detect the vulnerability of soils to radioactive contamination generated maps vulnerability showing that the region is very heterogeneous as this criterion, showing low levels of vulnerability for most of the region and in some areas, extreme vulnerability. This result identified the Pantanal as one of the less vulnerable to the radioactive contamination, but the sparse areas of extreme vulnerability can lead to contamination of subsoil and a significant spread of contamination via groundwater. This conceptual model, which defines vulnerability classification, is a first step for the study and determination of a numerical index of vulnerability to {sup 137}Cs soil and can be used in the task of remediation in case of rural areas by accident and {sup 137}Cs contamination establishing geographic areas where we should prioritize treatment due to a greater vulnerability. (author)

  7. Evaluation of low intensity laser effects in the thyroid glands region of male mice; Avaliacao dos efeitos do laser em baixa intensidade na regiao da glandula tireoide de camundongos

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Luciane Hiramatsu

    2002-07-01

    Recent studies have demonstrated that the infra-red laser can cause alterations in thyroid glands. Their normal activity must be preserved, as they produce the thyroidal hormones triiodothyronine (T{sub 3}) and thyroxine (T{sub 4}), that stimulate the oxidative metabolism, essential to maintain a healthy organism. The increase or diminution of these hormones results in alteration of the mitochondria's activity, that determines the secondary effects in the metabolism. The purpose of this study was to evaluate if there was any alteration of the thyroidal hormones plasma levels under irradiation from infra-red laser, with energy density of 4J/cm{sup 2}, in the region of thyroid glands of male mice. It was concluded that there was an hormonal level alteration statistically significant between the first day of irradiation and seven days after the last application. Histological studies showed that there was no morphological changes in histological sections of thyroid glands. The optical absorption spectroscopy of mice's serum presented a peak at approximately 280 nm, attributed to tyrosine (this is the amino acid compounding these hormones). (author)

  8. Experimental determination of the distribution coefficient (Kd) of lead and barium in soils of semiarid region of Bahia, Brazil; Determinacao experimental do coeficiente de distribuicao (Kd) de chumbo e bario em solos da regiao semiarida do estado da Bahia

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Mariana M.; Fernandes, Heloisa H.F; Pontedeiro, Elizabeth M.; Su, Jian, E-mail: mariana@lasme.coppe.ufrj.br, E-mail: heloisa@lasme.coppe.ufrj.br, E-mail: bettinadulley@hotmail.com, E-mail: sujian@lasme.coppe.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COOPE/UFRJ), Rio de Janeiro, RJ (Brazil). Lab. de Simulacao e Metodos em Engenharia

    2013-07-01

    To determine the concentration of heavy metals and other contaminants in soils, aimed at evaluating the environmental impact, the use of the distribution coefficient is required (Kd), defined as the relationship between the concentrations adsorbed and in solution. The objective of this study was to determine the rates for the Lead and Barium metals in soil collected in Caetite, the state of Bahia, in two different depths. The importance of determining the distribution coefficient lies in the fact that being performed using a tropical soil. For the isotherms of Kd was used batch test method by adsorption to obtain the final concentrations. The first step was to determine the best ratio soil: solution obtained after equilibration time and finally the equilibrium concentration of the contaminant. Were also calculated percentages of the metal adsorbed by the soil and the amount of solute by the adsorbent. With the values obtained in experiments and using Mathematica 8.0 software, were made graphics equilibrium concentration versus quantity adsorbed (C vs. S). It can also plot isotherms for different models of Kd: linear, Langmuir and Freundlich in order to determine which adsorption model would fit best to the measured data and thus determine the distribution coefficient of the metal in the soil analyzed. The Freundlich isotherm was better adapted to the points of the two metals in both soils.

  9. Electrical resistivity of ceramic-metal composite materials in the percolation region: application in crucibles for induction furnaces; Resistividade eletrica de materiais compositos do tipo ceramica-metal na regiao de percolacao: aplicacao em cadinhos para fornos de inducao

    Energy Technology Data Exchange (ETDEWEB)

    Sene, Frank Ferrer

    1997-07-01

    Ceramic composite materials were produced by mixing powders of Partially Stabilized (PSZ) with titanium, niobium or nickel, and cristobalite with titanium. Pellets were produced by uniaxially pressing the material followed by cold isostatic pressing and finally sintering at 1600 deg C for 1,5 hours in argon. The metal content was varied in the range of 0-40 volume percent (v/o). Electrical resistivity measurements were performed in the temperature range of 25 - 700 deg C. Samples containing metallic inclusions above 25 v/o show the predominance of electronic type conducting. For samples with metallic inclusion below 25 v/o, a typically ionic conduction behavior has been observed. PSZ-Ti and PSZ-Ni samples containing 25 v/o of metallic inclusions show an insulator - conductor transition in a given temperature range. Cristobalite samples containing 30 v/o of titanium show a conductor - insulator transition also in a specific temperature range. Tests performed in an induction furnace showed that samples containing metallic inclusions above 25 v/o had self-heated when exposed to electro magnetic fields in the range of radio frequency (r.f.) Crucibles of PSZ-Ti were made by slip casting followed by sintering at 1600 deg C for 1.5 hours in argon. These crucibles were exposed to electromagnetic fields in the r.f. range and the maximum temperature reached was 1350 deg C. Microstructure characterization was performed on those materials by X-ray diffraction, EDS, optical and scanning electron microscopy. (author)

  10. Chemical signature study of tupiguarani ceramic tradition from Central region of the Rio Grande do Sul state, Brazil; Estudo de assinaturas quimicas em ceramica da tradicao tupiguarani da regiao central do estado do Rio Grande do Sul, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Bona, Irene Akemy Tomiyoshi

    2006-07-01

    In this work a model based on experimental results using chemical composition data of the pottery sherds applied to Spearmann's no parametric test, principal component analysis and discriminant analysis, was applied. The samples are soils and Tupiguarani Tradition pottery sherd from the central area of the Rio Grande do Sul State. The chemical elements , Al, Ba, Ca, Cr, Fe, K Mn, Pb, Rb, S, Si, Sr, Ti, V and Zn were determined by energy dispersive X-ray fluorescence (EDXFR) while Ce, Cu, Gd, La, Nd, Pr, Sm, Th and Y by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) techniques. Relationships among the pottery characteristics, studied sites and sherd dispersion in the several sites were proposed. Indications of chemical signature of the small pottery with function to go or not to the fire were observed. The largest dispersion is of small pottery with surface treatment no corrugated. The potteries chemical fingerprints from Ijui River, Ibicui-Vacacai Mirim River and Jacui River were verified. (author)

  11. Frequency inverter and irrigation management in irrigated perimeter on Jaiba region - MG, Brazil; Uso de inversor de frequencia e do manejo da irrigacao em perimetro da regiao do Jaiba, MG

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, Maria Joselma de; Oliveira Filho, Delly; Vieira, Gustavo H.S. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Agricola], Emails: maria.moraes@ufv.br, delly@ufv.br, ghsvieira@ifes.edu.br; Scarcelli, Ricardo de O.C. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Eletrica], E-mail: rocvenceslau@yahoo.com.br

    2010-07-01

    The electric energy expenditure and the irrigation depth for one irrigated perimeter on Jaiba region/MG, Brazil, for the cultures: pineapple, banana, guava, lemon, papaya, mango, passion fruit, cantaloupe, pine cone and grape. With the monthly irrigation depth data for an hypothetical area of 12 lots (10 ha each), it was simulated, with Galateia software, the head pressure for 4 combinations of cultures: first - papaya (12 lots); second - banana (8 lots), guava (1), papaya (1), mango (1) and passion fruit (1); third - papaya (8), guava (1), pineapple (1), (1) and lemon (1); and fourth - guava (8), mango (1), papaya (1), pine cone (1) and passion fruit (1). It was dimensioned the necessary power and the electrical energy expenses with TOU (green category tariff) for the biggest irrigation depth. The frequency inverter use and the management of the number of working hours were simulated for each combination, in order to maximize the motor's load and the pump-motor set performance. For the combinations 2, 3, and 4 occurred reduction on the electrical energy consumption of 6%, 8% and 20%, respectively in respect of the combination 1. (author)

  12. The safety and the work organization in a coal subterranean mining of the region of Criciuma - Santa Catarina State, Brazil; A seguranca e a organizacao do trabalho em uma mineracao subterranea de carvao da regiao de Criciuma - Santa Catarina

    Energy Technology Data Exchange (ETDEWEB)

    Barreiros, Dorival

    1996-07-01

    The subject of this thesis is related with work organization and working conditions in the conventional mining system used in underground coal mining. An exploratory study was conducted in a mining company located in Criciuma, Santa Catarina state, Brazil. The objective was to know how tasks were performed and which organizational and technical factors affected the safety of the workers. The study of work organization and working conditions has traditionally been a meeting ground for contributions from a variety of disciplines such as engineering, sociology, psychology, occupational medicine, and so on, and for that reason there are different approaches. Therefore one can expect some controversies over the matter. Although there are many controversies and methodological difficulties to establish causal relation with the risks observed in the production process, under many circumstances the work organization affects the working conditions and the performance of the workers. Working conditions are still a problem which needs solutions with new approaches, mainly concerning work organization alternatives, which can satisfy not only enterprises but also better working conditions. (author)

  13. Characterization of residual soils of the region of Campos dos Goytacazes, RJ, Brazil, slip for use in artistic ceramics; Caracterizacao de solos residuais da regiao de Campos dos Goytacazes, RJ, Brazil, para uso de engobes em ceramica artistica

    Energy Technology Data Exchange (ETDEWEB)

    Chrispim, Z.M.P.; Alves, M.G.; Ramos, I.S.; Silva, A.L., E-mail: zeliachrispim@terra.com.b [Universidade Estadual do Norte Fluminense Darcy Ribeiro (LECIV/CCT/UENF), Campos dos Goytacazes, RJ (Brazil). Engenharia Civil; Almeida, L.L.P. de [Universidade Estadual do Norte Fluminense Darcy Ribeiro (LAMAV/CCT/UENF), Campos dos Goytacazes, RJ (Brazil). Lab. de Materiais Avancados

    2010-07-01

    This work was conducted in the city of Campos dos Goytacazes/RJ, in which four residual soils collected in the region were technologically characterized. We sought to determine their properties, such as analysis of the colors after firing, aiming at its use in ceramic art. To this end the tests were conducted in the laboratories of the Universidade Estadual do Norte Fluminense Darcy Ribeiro (UENF) and that are granulometry (by sieving and sedimentation), specific mass of grains, chemical analysis by X-ray fluorescence, diffraction mineralogical identification X-ray, differential thermal analysis and thermogravimetry. The soils were analyzed before drying at 110 deg C and after burning the different temperatures (500 deg C 750 deg C and 950 deg C). The analyzed results showed the physical composition, chemical and mineralogical of raw material. After burning was possible to observe several color variations. (author)

  14. Avaliação de tecnologias avançadas para o reúso de água em indústria metal-mecânica Evaluation of advanced technologies for water reuse in mechanical industry

    Directory of Open Access Journals (Sweden)

    Airton Oenning Junior

    2007-09-01

    Full Text Available Com o objetivo de reduzir o consumo de água e o descarte do efluente tratado de uma indústria metal-mecânica foi proposta a avaliação técnica e econômica de cinco tecnologias de tratamento que pudessem proporcionar a reutilização do efluente. Foram levantados quatro locais para reúso e sugeridos critérios para cada um deles. Foi constatado que na adsor-ção com carvão ativado e na osmose reversa o efluente tratado por estes processos poderia ser reutilizado nos locais propostos e, com vazão de reúso de 2,5m³/h, os custos ficaram em US$ 1,14/m³ e US$ 1,70/m³ respectivamente. Para o ozônio e o dióxido de cloro, mesmo desinfetando o efluente, obteve-se apenas resultados satisfatórios, com custo de US$ 0,54/m³ e US$ 0,71/m³ respectivamente. Na coagulação/floculação todos os parâmetros analisados atenderam a dois locais de reúso, com exceção dos SDT e se obteve custo de US$ 1,57/m³With the objective to reduce the water consumption and the discharge of effluents in a metal industry, a technical and economical evaluation of five treatment technologies was proposed in order to reuse the effluents. Four sites for water reuse were chosen and for each of them criteria were suggested. It was evidenced that in the adsorption with activated carbon and reverse osmosis the effluent treated by these processes could be reused and, with the flowrate projected of 2.5m³/h, the cost attained US$ 1.14/m³ and US$ 1.70/m³ respectively. For the ozone and chlorine dioxide, even so the effluent was disinfected, gave only satisfactory results and the cost attained US$ 0.54/m³ and US$ 0.71/m³ respectively. For the treatment with coagulation/flocculation, all the analyzed parameters were successful in two reuse places, with exception of the TDS. The cost for this technology attained US$ 1.57/m³

  15. Medição de desempenho em cadeias de suprimentos: um estudo na indústria automobilística Performance measurement in supply chains: a study in the automotive industry

    Directory of Open Access Journals (Sweden)

    Mário Sacomano Neto

    2012-12-01

    Full Text Available Muito da base conceitual sobre medição de desempenho nas empresas industriais foi construído sob a perspectiva interna, ou seja, empresas tratadas individualmente. Com o advento e expansão do conceito de gestão da cadeia de suprimentos, cresceu a demanda por uma revisão do conhecimento e dos sistemas de medição à luz da cadeia como um todo. Por sua vez, a introdução dos novos arranjos produtivos na indústria automobilística, como os condomínios industriais, estimulou o desenvolvimento de novos padrões de relacionamento nas cadeias de suprimentos, trazendo consigo novas formas de se conduzir a gestão de desempenho entre empresas. Nesse contexto, a pesquisa realizada teve como propósito principal identificar a ocorrência e analisar as principais características da medição de desempenho em uma representativa cadeia de suprimentos da indústria automobilística brasileira, a qual utiliza um sistema de montagem do tipo condomínio industrial. A pesquisa teve um caráter exploratório, descritivo, e a coleta de dados foi realizada principalmente por meio de entrevistas (seguindo um questionário semiestruturado com executivos envolvidos com o tema de estudo nas referidas empresas. Como principal resultado, a pesquisa não identificou a ocorrência de um sistema único de medição de desempenho da cadeia de suprimentos estudada. O constatado é que o sistema de medição de desempenho interno da montadora desdobra-se a montante e a jusante, com claras implicações nos sistemas de medição de desempenho dos quatro fornecedores e da concessionária estudados. A partir dos indicadores de desempenho das empresas, pode-se constatar que as medidas a montante são fortemente direcionadas para os aspectos operacionais relacionados à qualidade, produção e desempenho das entregas e as medidas a jusante apresentam um caráter mais estratégico e mercadológico. Também, tem-se que a medição de desempenho na cadeia tende a ser mais

  16. Caracterização e tratabilidade biológica dos efluentes líquidos gerados em cabines de pintura de uma indústria moveleira Characterization and treatability of wastewater from a dying hood of a furniture industry

    Directory of Open Access Journals (Sweden)

    Anselmo R. Lage Santos

    2010-12-01

    Full Text Available O objetivo deste trabalho foi caracterizar os efluentes gerados em cabines de pintura de uma indústria moveleira e avaliar a eficiência de sistemas biológicos (anaeróbio e aeróbio para o seu tratamento. O efluente industrial apresentou elevado teor de matéria orgânica (DQO total de 634 a 2.790 mg.L-1; DBO5 total de 360 a 972 mg.L-1 e baixos teores de macronutrientes (NTK de 1,9 mg.L-1 e Ptotal de 0,5 mg.L- e metais tóxicos. Os ensaios de tratabilidade em reator UASB (~25ºC e tempo de detenção hidráulica - TDH = 10 horas, indicaram uma eficiência máxima de remoção de matéria orgânica de 90% na composição volumétrica 70:30 (efluente industrial:esgoto sanitário. A alimentação do reator UASB só com efluente industrial resultou em acúmulo de ácidos graxos voláteis e inibição microbiana, mas o uso de pós-tratamento aeróbio (TDH = 96h garantiu elevada eficiência global (~88% de remoção de matéria orgânica.The main objective of this work was to characterize the wastewater from the dying hood of a woven furniture industry, and to assess the efficiency of biological processes (anaerobic and aerobic for its treatment. The physical-chemical characterization of the industrial wastewater showed a high organic matter content (total COD from 634 to 2,790 mg.L-1; total BOD5 from 360 to 972 mg.L-1, low content of macronutrients (NTK of 1.9 mg.L-1 and P of 0.5 mg.L-1 and toxic metals. The anaerobic degradation tests in a bench-scale UASB reactor (25ºC and hydraulic retention time - HRT = 10 hours showed that a maximum removal efficiency of 90% was obtained when the reactor was fed with 30% raw sewage and 70% industrial wastewater. The feeding of UASB reactor with only industrial wastewater resulted in volatile fatty acids accumulation and microbial inhibition; however, the use of aerobic post-treatment (HRT = 96 hours granted a high (~88% organic matter removal efficiency.

  17. Reference Gene Selection in the Desert Plant <em>Eremosparton songoricuem>m>

    Directory of Open Access Journals (Sweden)

    Dao-Yuan Zhang

    2012-06-01

    Full Text Available <em>Eremosparton songoricum em>(Litv. Vass. (<em>E. songoricumem> is a rare and extremely drought-tolerant desert plant that holds promise as a model organism for the identification of genes associated with water deficit stress. Here, we cloned and evaluated the expression of eight candidate reference genes using quantitative real-time reverse transcriptase polymerase chain reactions. The expression of these candidate reference genes was analyzed in a diverse set of 20 samples including various <em>E. songoricumem> plant tissues exposed to multiple environmental stresses. GeNorm analysis indicated that expression stability varied between the reference genes in the different experimental conditions, but the two most stable reference genes were sufficient for normalization in most conditions.<em> EsEFem> and <em>Esα-TUB> were sufficient for various stress conditions, <em>EsEF> and <em>EsACT> were suitable for samples of differing germination stages, and <em>EsGAPDH>and <em>Es>UBQ em>were most stable across multiple adult tissue samples. The <em>Es18Sem> gene was unsuitable as a reference gene in our analysis. In addition, the expression level of the drought-stress related transcription factor <em>EsDREB2em>> em>verified the utility of<em> E. songoricumem> reference genes and indicated that no single gene was adequate for normalization on its own. This is the first systematic report on the selection of reference genes in <em>E. songoricumem>, and these data will facilitate future work on gene expression in this species.

  18. Cultura e clima organizacionais: um estudo em indústrias de laticínios do estado do Rio Grande do Norte Organizational culture and climate: a study in Rio Grande do Norte's dairy industries

    Directory of Open Access Journals (Sweden)

    Luiz Célio Souza Rocha

    2013-06-01

    Full Text Available O objetivo deste trabalho é investigar se existe relação entre a cultura organizacional e o clima organizacional, tendo, como locus de pesquisa, indústrias de laticínios do Rio Grande do Norte. Para tanto, realizou-se um estudo exploratório-descritivo e conclusivo-causal, em uma amostra composta por 211 funcionários de todos os níveis hierárquicos das empresas participantes, o que corresponde a 25,6% do total do setor. A partir dos dados coletados, identificaram-se as características pessoais dos respondentes, o perfil da cultura organizacional predominante e o clima organizacional predominante nas indústrias analisadas. Para a análise da cultura organizacional, utilizou-se o Modelo dos Valores Competitivos (CAMERON; QUINN, 2006 com adaptações, segundo Santos (2000. Para a análise do clima organizacional, utilizou-se a Escala de Medida de Clima Organizacional, proposta por Martins et al. (2004 e Martins (2008, com modificações de forma a se ter um instrumento mais enxuto. Os dados coletados foram submetidos a análises estatísticas quantitativas que permitiram chegar às seguintes conclusões: os perfis culturais foram encontrados de forma equilibrada nas organizações pesquisadas, com ênfase para os perfis "cultura clã" e "cultura mercado"; as organizações pesquisadas possuem um clima bom, segundo a classificação de Martins (2008, com destaque para os fatores "apoio da chefia e da organização" e "conforto físico", fatores estes bem coerentes com o perfil "cultura clã"; e os perfis culturais apresentaram influência sobre os fatores do clima organizacional. Assim, os resultados nos permitem concluir que há relações entre os perfis culturais e os fatores determinantes do clima organizacional nas organizações pesquisadas.The objective of this study is to investigate the relationship between organizational culture and the organizational climate in Rio Grande do Norte's dairy industries. An exploratory

  19. Dor orofacial e absenteísmo em trabalhadores da indústria metalúrgica e mecânica Orofacial pain and absenteeism in workers of the metallurgic and mechanics industry

    Directory of Open Access Journals (Sweden)

    Josimari Telino de Lacerda

    2008-12-01

    Full Text Available O objetivo do estudo foi verificar a prevalência de dor orofacial e sua relação com absenteísmo em trabalhadores do setor metalúrgico e mecânico do município de Xanxerê, Santa Catarina. Realizou-se um estudo transversal envolvendo todos os trabalhadores do sexo masculino (n = 480 das 13 indústrias do setor no município. As informações foram coletadas por meio de entrevistas estruturadas. Informações sócio-demográficas, prevalência, severidade e localização de dor orofacial no último semestre, bem como sobre falta ao trabalho devido à dor orofacial, compuseram o questionário. Dados de identificação, setor e turno de trabalho foram coletados nos departamentos de recursos humanos das empresas. Os dados foram analisados por meio de estatística descritiva e testes de associação de qui-quadrado de Pearson entre absenteísmo e dor orofacial. A prevalência de dor orofacial foi de 66,1%, sendo dor de dente provocada ou dor de dente espontânea os tipos mais frequentes. O absenteísmo devido a dor orofacial no último semestre foi relatado por 9,3% dos trabalhadores, mostrando-se associado à dor de dente espontânea (p The objective of this study was to assess the prevalence of orofacial pain and its association with absenteeism in worke rs of the metallurgic and mechanics industry of the city of Xanxerê, Brazil. A cross sectional study was performed involving all male workers(n=480 of the 13 industries of the sector in the city. The information was collected by means of structured interviews. Socio-demographic information, prevalence, severity and localization of orofacial pain in the last semester as well as on absenteeism due to orofacial pain formed the questionnaire. Identification data, work sector and shift were collected in the departments of human resources of the companies. The data were assessed using descriptive statistics and Pearson chi-squared tests between absenteeism and pain in the orofacial region. The

  20. Chemical, mineralogical and ceramic properties of clays from Northern Santa Catarina, Brazil; Caracterizaco fisico-quimica de argilas da regiao norte de Santa Catarina

    Energy Technology Data Exchange (ETDEWEB)

    Correia, S L; Bloot, E L; Folgueras, M.V., E-mail: sivaldo@joinville.udesc.b [Universidade do Estado de Santa Catarina (UDESC/CCT), Joinville, SC (Brazil). Centro de Ciencias Tecnologicas; Hotza, D [Universidade Federal de Santa Catarina (UFSC/EQA), Florianopolis, SC (Brazil). Dept. de Engenharia Quimica

    2009-07-01

    Clay materials crop out in the northern Santa Catarina mining district were investigated in order to assess their potential in the ceramic industry. Four different clays (A, B, C and D) were selected. Their chemical composition was obtained by Xray fluorescence and their mineralogy by X-ray diffraction, coupled with numerical rational analysis. Their thermal behaviour was studied by differential thermal analysis. Technological testing consisted in a simulation of the industrial processing performed at a laboratory scale. The test pieces were obtained by pressing and fired in the range of 850-1200 deg C. In each case their technological properties were studied. The main mineralogical phases detected were kaolinite, quartz and mica. Hematite and feldspars may be present in the clays. The clays show two groups of particle sizes almost equally frequent in the range of 1 to 60 {mu}m. The northern Santa Catarina clays are suitable for the production of bricks and earthenware in the 900- 1100 deg C range. (author)

  1. Mudanças em regimes industriais e acumulação de capacidades tecnológicas: evidências de empresas de celulose e papel no Brasil Changes in industrial regimes and accumulation of technological capabilities: evidence from pulp and paper firms in Brazil

    Directory of Open Access Journals (Sweden)

    Claudia Teresa Carvajal García

    2009-12-01

    Full Text Available A despeito da profusão de estudos sobre capacidade tecnológica em nível de empresas ao longo dos últimos 30 anos, há escassez de estudos sobre similaridades e diferenças entre empresas do mesmo setor industrial, em termos de acumulação de capacidades tecnológicas e suas implicações para o aprimoramento de indicadores de performance técnico-econômica ao longo de diferentes regimes industriais, especialmente no contexto de países de industrialização recente, como é o caso do Brasil. Baseando-se em evidências de primeira mão colhidas à base de extensivos trabalhos de campo, este artigo examina essas questões em três grandes empresas de celulose e papel no Brasil (1970-2004. O estudo encontrou: (1 Diferenças inter e intraempresariais em termos da maneira e velocidade de acumulação de capacidades para funções tecnológicas específicas ao longo dos diferentes períodos; (2 Tais diferenças refletiram-se, com diferentes graus de intensidade, no aprimoramento dos indicadores de performance técnico-econômica; (3 As empresas responderam positivamente às mudanças para uma economia aberta partir dos anos 1990; (4 Porém, os aprimoramentos em seus indicadores de performance técnico-econômica não derivaram das mudanças do regime industrial per se, mas, principalmente, dos seus esforços internos para acumulação tecnológica.Despite the profusion of studies of firm-level technological capabilities studies, over the past 30 years, there is a scarcity of analyses on similarities and differences across firms, of the same industrial sector, in terms of types and levels, direction and rate of accumulation of technological capabilities and their implications for the improvement of techno-economic performance across different industrial regimes, especially in the context of late-industrializing countries, as it is the case of Brazil. Based on first-hand qualitative and quantitative empirical evidence, collected on the basis of

  2. Efeitos respiratórios da exposição ao talco industrial em ex-trabalhadores de mineração Efectos respiratorios de la exposición al talco industrial en extrabajadores de minería Respiratory effects from industrial talc exposure among former mining workers

    Directory of Open Access Journals (Sweden)

    Rosinelle Castelo Branco Ramos Loyola

    2010-06-01

    Full Text Available OBJETIVO: Avaliar efeitos respiratórios tardios da inalação ocupacional de talco contaminado por asbesto. MÉTODOS: Análise de série de casos de 29 ex-trabalhadores de mineração de talco contaminado com asbestos provenientes de Carandaí, MG, atendidos no Centro de Referência Estadual de Saúde do Trabalhador de Minas Gerais em 2004-2005. Os ex-trabalhadores foram submetidos a anamnese clínico-ocupacional, radiografia de tórax e espirometria. Foi criado um escore de exposição que, multiplicado pela duração, originou um índice de exposição cumulativa ao talco. Para verificar a associação do índice de exposição cumulativa com a presença de alterações radiológicas, sugestivas de pneumoconiose e/ou alterações pleurais, foi ajustado um modelo de regressão logística exata. RESULTADOS: Todos os ex-trabalhadores eram homens, com média de idade de 48,2 anos. Nas radiografias de tórax foram encontradas alterações pleurais em três deles, opacidades parenquimatosas compatíveis com pneumoconiose em um e suspeita em seis. Alterações espirométricas ocorreram em três. A regressão logística apontou odds ratio de 1,059 (IC 95%: 1,012;1,125 para o índice acumulado, ou seja, cada unidade no índice resulta em um aumento de 5,9% na chance de apresentar alteração radiológica compatível ou suspeita de pneumoconiose. Em relação à mediana do tempo estimado de latência entre o início da exposição até o diagnóstico das placas pleurais, ocorreu diferença significativa (p = 0,013 entre os casos (27,0 anos e não casos (14,3 anos. CONCLUSÕES: Os achados apontam a necessidade de controle clínico nos trabalhadores que foram expostos a asbesto, particularmente devido aos efeitos tardios da exposição a esse mineral.OBJETIVO: Evaluar efectos respiratorios tardíos de la inhalación ocupacional de talco contaminado por asbesto. MÉTODOS: Análisis de serie de casos de 29 extrabajadores de minería de talco contaminado

  3. Modelo de autoavaliação para suporte à gestão organizacional: experimentação em indústria do segmento de malharia Model of self-evaluation to support organizational performance: experiment performed in knitted fabric textile industry

    Directory of Open Access Journals (Sweden)

    Gisele Alvim de Rezende Vilas Boas

    2012-01-01

    Full Text Available Este trabalho apresenta um modelo para suporte à gestão organizacional com foco em autoavaliação fundamentado nos critérios dos principais prêmios de excelência em gestão internacionais e do Brasil. Esta proposta teve por finalidade permitir avaliações personalizadas de desempenho do sistema de gestão e da importância para a organização das práticas de excelência em gestão preconizadas por tais prêmios. O método de pesquisa constituiu-se em fundamentação teórica, análise comparativa de três dos principais prêmios de excelência em gestão internacionais e do Brasil e experimentação do modelo proposto em uma indústria do segmento de malharia. A aplicação do modelo proposto possibilitou uma avaliação personalizada do desempenho do sistema de gestão da organização objeto de estudo e, também, da importância atribuída às práticas de excelência em gestão abordadas nos critérios. O contraste entre desempenho e importância permitiu a identificação de pontos organizacionais prioritários de melhoria da organização.This project aims to present a sample to support organizational management focusing on self-evaluation based on the criteria of the most important international and national excellence awards in management. The objective of the sample was to allow for customized evaluations of performance regarding the management system as well as evaluations of the importance of management excellence practices to the company preconized by those awards. The research methodology was based on a theoretical foundation, comparative analysis of the three main Excellence Awards in Management in Brazil, and on the experiment of the sample proposed in a knitted fabric textile industry. The sample proposed has allowed for a customized performance evaluation of the management system of the company used as the object of study, and the importance of the management excellence practices involved in the criteria. The contrast

  4. Modelo de autoavaliação para suporte à gestão organizacional: experimentação em indústria do segmento de malharia Model of self-evaluation to support organizational performance: experiment performed in knitted fabric textile industry

    Directory of Open Access Journals (Sweden)

    Gisele Alvim de Rezende Vilas Boas

    2013-06-01

    Full Text Available Este trabalho apresenta um modelo para suporte à gestão organizacional com foco em autoavaliação fundamentado nos critérios dos principais prêmios de excelência em gestão internacionais e do Brasil. Esta proposta teve por finalidade permitir avaliações personalizadas de desempenho do sistema de gestão e da importância para a organização das práticas de excelência em gestão preconizadas por tais prêmios. O método de pesquisa constituiu-se em fundamentação teórica, análise comparativa de três dos principais prêmios de excelência em gestão internacionais e do Brasil e experimentação do modelo proposto em uma indústria do segmento de malharia. A aplicação do modelo proposto possibilitou uma avaliação personalizada do desempenho do sistema de gestão da organização objeto de estudo e, também, da importância atribuída às práticas de excelência em gestão abordadas nos critérios. O contraste entre desempenho e importância permitiu a identificação de pontos organizacionais prioritários de melhoria da organização.This project aims to present a sample to support organizational management focusing on self-evaluation based on the criteria of the most important international and national excellence awards in management. The objective of the sample was to allow for customized evaluations of performance regarding the management system as well as evaluations of the importance of management excellence practices to the company preconized by those awards. The research methodology was based on a theoretical foundation, comparative analysis of the three main Excellence Awards in Management in Brazil, and on the experiment of the sample proposed in a knitted fabric textile industry. The sample proposed has allowed for a customized performance evaluation of the management system of the company used as the object of study, and the importance of the management excellence practices involved in the criteria. The contrast

  5. Synthesis, Crystal Structure and Luminescent Property of Cd (II Complex with <em>N-Benzenesulphonyl-L>-leucine

    Directory of Open Access Journals (Sweden)

    Xishi Tai

    2012-09-01

    Full Text Available A new trinuclear Cd (II complex [Cd3(L6(2,2-bipyridine3] [L =<em> Nem>-phenylsulfonyl-L>-leucinato] has been synthesized and characterized by elemental analysis, IR and X-ray single crystal diffraction analysis. The results show that the complex belongs to the orthorhombic, space group<em> Pem>212121 with<em> aem> = 16.877(3 Å, <em>b> em>= 22.875(5 Å, <em>c em>= 29.495(6 Å, <em>α> em>= <emem>= <emem>= 90°, <em>V> em>= 11387(4 Å3, <em>Z> em>= 4, <em>Dc>= 1.416 μg·m−3, <emem>= 0.737 mm−1, <em>F> em>(000 = 4992, and final <em>R>1 = 0.0390, <em>ωR>2 = 0.0989. The complex comprises two seven-coordinated Cd (II atoms, with a N2O5 distorted pengonal bipyramidal coordination environment and a six-coordinated Cd (II atom, with a N2O4 distorted octahedral coordination environment. The molecules form one dimensional chain structure by the interaction of bridged carboxylato groups, hydrogen bonds and p-p interaction of 2,2-bipyridine. The luminescent properties of the Cd (II complex and <em>N-Benzenesulphonyl-L>-leucine in solid and in CH3OH solution also have been investigated.

  6. Effect of alcohol and formaldehyde on the ä13C and ä15N isotopic composition of Plagioscion squamosissimus and Hypophthalmus edentatus (Pisces, Osteichthyes = Efeito do alcool e formol sobre a composicao isotopica de ƒÂ13C e de ƒÂ15N em Plagioscion squamosissimus e Hypophthalmus edentatus (Pisces, Osteichthyes

    Directory of Open Access Journals (Sweden)

    Gislaine Iachstel Manetta

    2011-09-01

    Full Text Available The present study investigates the ƒÂ13C and ƒÂ15N isotopic composition in frozen samples (control, samples in alcohol and in formaldehyde of Plagioscion squamosissimus and Hypophthalmus edentatus. From each individual we extracted a strip of muscle from the region above the lateral line, in the dorsal fin base, that was divided into three equal parts, each one was submitted to one type of treatment: freeze . control group (-15oC, conservation in alcohol 70%and fixation in formaldehyde 4%. Samples were kept under those treatments for 30 days, washed and submerged in distilled water for 4 hours. Afterwards, they were dried up in air oven at 60oC for 48 hours and macerated until the obtaining of a fine powder. A significant difference was found in isotopic values of carbon and nitrogen, between the control and the samples in alcohol and formaldehyde, except for ƒÂ13C from the H. edentatus samples in formaldehyde. The carbon isotopic values of samples in alcohol were mostly enriched compared to control, whereas the samples in formaldehyde presented depleted values in relation to the control. The nitrogen isotopic values for both samples preserved in alcohol and formaldehyde were enriched when compared to the values of frozen samples, independently of used preservatives. Therefore, the isotopic correction should be accomplished according to the isotope and preservative employed for species of freshwater fish.O presente estudo investiga a composicao isotopica de ƒÂ13C e ƒÂ15N entre as amostras congeladas (controle, em alcool e em formol de Plagioscion squamosissimus e Hypophthalmus edentatus. De cada individuo foi extraida uma faixa de musculo localizada na regiao acima da linha lateral, na base da nadadeira dorsal, a qual foi subdividida em tres partes iguais, sendo cada uma delas submetida a um tipo de tratamento: congelamento - grupo control (-15oC, conservacao em alcool 70% e fixacao em formol 4%. As amostras foram mantidas nos

  7. Racionalização do uso de força motriz em fábrica de ração Management of motive power use in animal feed industry

    Directory of Open Access Journals (Sweden)

    Carlos A. Teixeira

    2005-08-01

    Full Text Available A falta de investimento no setor energético, aliada à sazonalidade de recursos naturais necessários para a geração de energia hidroelétrica, faz da racionalização do uso de energia elétrica uma ferramenta de apoio imprescindível para o crescimento do País. A ração animal pode representar entre 70 e 80% do custo de produção da criação de animais. Sendo assim, é importante o estudo da racionalização do uso de energia em processos que utilizam intensivamente força motriz, tais como as fábricas de ração. Na fábrica de ração estudada, os motores elétricos são utilizados principalmente para moagem e mistura de granulados e transporte. Com o objetivo de racionalizar o uso da energia elétrica, foi realizado estudo de adequação de força motriz dos equipamentos da fábrica de ração da Indústria Pif Paf Alimentos. O índice de carregamento médio dos motores elétricos estudados foi de 48,6%. O potencial estimado total de economia com energia elétrica anual, utilizando-se sempre da melhor opção de adequação de força motriz foi de R$ 24.426,50 ao ano (23,9%. Para que essas medidas sejam efetivadas, devem-se adequar também: (i as exigências elétricas do circuito, como ajuste de relés e escolha de fusíveis; (ii o horário de funcionamento, e (iii necessidade de implantação de sistema de armazenamento de ração.The lack of investment in the energy sector, allied to the seasoning of natural resources necessity for the generation of hydroelectric energy, makes the rationalization of the use of electric energy an indispensable tool for country growth in an harmonic manner. The animal feed can represent around 70 to 80% of the total cost for running an animal feed production facility. So, it is important to study the energy management in processes that mainly use motive power, such as the animal feed factories. In the animal feed factory studied, the electric motors are used mainly for milling and mixture

  8. Hidrocarbonetos policíclicos aromáticos em resíduos sólidos industriais: uma avaliação preliminar do risco potencial de contaminação ambiental e humana em áreas de disposição de resíduos Polycyclic aromatic hydrocarbons in industrial solid waste: a preliminary evaluation of the potential risk of environmental and human contamination in waste disposal areas

    Directory of Open Access Journals (Sweden)

    Cristina L. S. Sisinno

    2003-04-01

    Full Text Available A disposição adequada dos resíduos sólidos é importante para evitar que os mesmos se transformem em fonte de contaminação ambiental e humana. A NBR 10.004 - Classificação de Resíduos - lista vários hidrocarbonetos policíclicos aromáticos (HPAs e indica que, a presença de pelo menos um deles na massa bruta do resíduo é suficiente para classificá-lo como resíduo perigoso. O objetivo deste estudo foi verificar a presença de HPAs em amostras de resíduos sólidos provenientes de alguns segmentos industriais, para se obter uma avaliação preliminar do potencial de contaminação que estes resíduos podem representar, caso não recebam destino adequado. Pelo menos um dos HPAs previstos na NBR 10.004 (benzo[a]antraceno, benzo[a]pireno, benzo[b]fluoranteno, benzo[k]fluoranteno, indeno[1,2,3-c,d]pireno, criseno ou fluoranteno foi identificado em todos os resíduos estudados, classificando-os como perigosos. Nossos resultados indicam que todos os resíduos estudados continham HPAs de importância toxicológica, o que implica que sua disposição final seja feita em locais adequados para minimizar os riscos à saúde humana e ambiental oriundos das áreas de disposição de resíduos.Proper solid waste disposal is important to avoid human and environmental contamination. The NBR 10,004 Waste Classification lists several polycyclic aromatic hydrocarbons (PAHs and indicates that the presence of at least one PAH in a waste sample is enough to classify it as hazardous. The aim of this study was a preliminary evaluation of PAHs in solid waste samples from selected industries to obtain a preliminary overview of their potential for contamination in case of improper disposal. One or more PAHs listed in NBR 10,004 (benzo[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, indene[1,2,3-c,d]pyrene, chrysene, or fluoranthene were found in all samples, thus leading to their classification as hazardous waste. Our results showed

  9. Deslocamento para o trabalho e fatores associados em industriários do sul do Brasil Desplazamiento para el trabajo y factores asociados en industriales del sur de Brasil Commuting to and from work and factors associated among industrial workers from Southern Brazil

    Directory of Open Access Journals (Sweden)

    Shana Ginar da Silva

    2012-02-01

    Full Text Available Estudo transversal visando estimar a prevalência das formas de deslocamento para o trabalho e identificar fatores associados em trabalhadores do Estado do Rio Grande do Sul. Um total de 2.265 trabalhadores responderam questionário sobre a forma de deslocamento utilizado para ir ao trabalho: caminhada/bicicleta, ônibus ou de carro/moto. Para estimar a associação entre o desfecho e variáveis sociodemográficas, ocupacionais e comportamental foi utilizada a regressão logística multinomial. O principal meio de deslocamento para o trabalho foi o ônibus (45,7%. Trabalhadores com maior condição socioeconômica tiveram maior probabilidade de deslocamento passivo.Estudio transversal buscando estimar la prevalencia de las formas de desplazamiento para el trabajo e identificar factores asociados en trabajadores del Estado do Rio Grande do Sul (sur de Brasil. Un total de 2.265 trabajadores respondieron cuestionario sobre la forma de desplazamiento utilizado para ir al trabajo: caminata/bicicleta, autobús o en carro/moto. Para estimar la asociación entre el resultado y variables sociodemográficas, ocupacionales y conductual se utilizó la regresión logística multinomial. El principal medio de desplazamiento para el trabajo fue el autobús (45,7%. Trabajadores con mayor condición socioeconómica tuvieron mayor probabilidad de desplazarse de forma pasiva.Cross-sectional study that aimed to estimate the prevalence of forms of commuting to and from work and to identify factors associated among industrial workers in the State of Rio Grande do Sul, southern Brazil. A total of 2,265 workers completed a questionnaire on the forms of commuting to and from work (walking/biking, bus or car/motorcycle. Multinomial logistic regression was used to estimate the association between the outcome and sociodemographic, occupational and behavioral variables. The main form of commuting to and from work was by bus (45.7%. Workers with higher socioeconomic

  10. Atmospheric pollution biomonitoring of the Sao Paulo metropolitan region using epiphytic lichens; Uso de liquens epifiticos no biomonitoramento da poluicao atmosferica da regiao metropolitana de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Fuga, Alessandra

    2006-07-01

    composition. It was also observed that samples from PECB and PEI were separated from groups and subgroups formed by the samples from the metropolitan region. This result indicates the preservation of PECB and PEI areas considered non-polluted. The lichens collected in the PEI presented, in general, lower concentrations of the elements than those from the metropolitan region of Sao Paulo in regards to those elements related to anthropogenic actions. The distribution maps of element concentrations allowed identification of sites in the metropolitan region that present higher elemental concentrations. Furthermore the distribution maps also showed that the pollution in the metropolitan region presents different profiles due to many sources and different pollutant emissions. The probable sources of elements determined in lichens from the metropolitan region are industrial, vehicular and soil. Results obtained indicate that the C. texana species can be used as a passive biomonitor of element pollution in the Sao Paulo metropolitan area. This species is abundant in both polluted and non-polluted areas and thus allows to distinguish regions with distinct levels of pollution. (author)

  11. Desempenho de um reator Fenton em escala industrial aplicado à remoção de fenóis em uma planta de recuperação de resíduos da indústria de papel e celulose

    Directory of Open Access Journals (Sweden)

    Everton Skoronski

    2015-11-01

    Full Text Available Este trabalho descreve o desempenho de um reator Fenton em grande escala usado para remoção de fenol em uma planta de valorização dos resíduos da indústria de papel e celulose. O efluente consiste em óleo vegetal e fenol. A estação de tratamento objetiva tratar 4 m3 h-1 e é constituída por um pré-tratamento para remoção de óleo, reator Fenton, Flotador de Ar Dissolvido - FAD e uma lagoa de aeração. Para a avaliação da estação de tratamento foram comparadas análises próprias do efluente com análises feitas em laboratório certificado. A eficiência global de remoção de fenol é maior do que 99,7%. Foi demonstrado que a combinação do processo de oxidação avançada com o biológico constitui-se em um sistema de tratamentos interessante a fim de remover contaminantes recalcitrantes.

  12. Hygienic-sanitary working practices and implementation of a Hazard Analysis and Critical Control Point (HACCP plan in lobster processing industries Condições higiênico-sanitárias e implementação do plano de Análise de Perigos e Pontos Críticos de Controle (APPCC em indústrias processadoras de lagosta

    Directory of Open Access Journals (Sweden)

    Cristina Farias da Fonseca

    2013-03-01

    Full Text Available This study aimed to verify the hygienic-sanitary working practices and to create and implement a Hazard Analysis Critical Control Point (HACCP) in two lobster processing industries in Pernambuco State, Brazil. The industries studied process frozen whole lobsters, frozen whole cooked lobsters, and frozen lobster tails for exportation. The application of the hygienic-sanitary checklist in the industries analyzed achieved conformity rates over 96% to the aspects evaluated. The use of the Hazard Analysis Critical Control Point (HACCP) plan resulted in the detection of two critical control points (CCPs) including the receiving and classification steps in the processing of frozen lobster and frozen lobster tails, and an additional critical control point (CCP) was detected during the cooking step of processing of the whole frozen cooked lobster. The proper implementation of the Hazard Analysis Critical Control Point (HACCP) plan in the lobster processing industries studied proved to be the safest and most cost-effective method to monitor each critical control point (CCP) hazards.Objetivou-se com este estudo verificar as condições higiênico-sanitárias e criar um plano de Análise de Perigos e Pontos Críticos de Controle (APPCC) para implantação em duas indústrias de processamento de lagosta no Estado de Pernambuco, Brasil. As indústrias estudadas processam lagosta inteira congelada, lagostas inteiras cozidas congeladas e caudas de lagosta congelada para exportação. A aplicação de um checklist de controle higiênico-sanitário nas indústrias visitadas resultou em uma classificação global de conformidades maior que 96% dos aspectos analisados. O desenvolvimento do plano APPCC resultou na detecção de dois pontos críticos de controle (PCC), incluindo o recebimento e etapas de classificação, no processamento de lagosta congelada e caudas de lagosta congelada, e um PCC adicional foi detectado no processamento de lagosta inteira cozida

  13. Prevalência de fatores de risco cardiovascular em trabalhadores de uma indústria brasileira Prevalencia de factores de riesgo cardiovascular en trabajadores de una industria brasileña Prevalence of cardiovascular risk factors in a population of Brazilian industry workers

    Directory of Open Access Journals (Sweden)

    Roberta Soares Lara Cassani

    2009-01-01

    Full Text Available FUNDAMENTO: Determinar os fatores de risco cardiovascular é essencial para a prevenção primária e secundária das doenças do aparelho circulatório. OBJETIVO: Obter a prevalência de fatores de risco cardiovascular em uma população de industriários no Brasil. MÉTODOS: Estudo transversal em uma coorte com entrevista sociodemográfica para identificação de fatores de risco cardiovascular, medidas antropométricas e de pressão arterial e coleta de sangue capilar para dosagem de glicose, colesterol e triglicérides em funcionários de ambos os sexos de indústria alimentícia. RESULTADOS: Avaliaram-se 1.047 funcionários, sendo 913 (87% do sexo masculino, com idade média de 36 ± 8 anos. A freqüência de sedentarismo foi de 83% e de sobrepeso de 63%. Hipertensão arterial foi identificada em 28% dos indivíduos e 45% estavam na faixa de pré-hipertensão. Alteração de glicose capilar foi detectada em 49% dos participantes, colesterol elevado em 7% e triglicérides em 11% da população. Os valores de índice de massa corpórea não se associaram à renda, mas houve relação inversa com nível de escolaridade. CONCLUSÃO: Sobrepeso e sedentarismo são os principais fatores de risco cardiovascular em população de industriários.FUNDAMENTO: Determinar los factores de riesgo cardiovascular es esencial para la prevención primaria y secundaria de las enfermedades del aparato circulatorio. OBJETIVO: Obtener la prevalencia de factores de riesgo cardiovascular en una población del sector industrial en Brasil. MÉTODOS: Estudio transversal en una cohorte con entrevista sociodemográfica para identificación de factores de riesgo cardiovascular, medidas antropométricas y de presión arterial y colecta de sangre capilar para dosificación de glucosa, colesterol y triglicéridos en funcionarios de ambos sexos de una industria alimenticia. RESULTADOS: Se evaluaron a 1.047 funcionarios, 913 (87% del sexo masculino, con edad promedio de 36

  14. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  15. Farmaceutische industrie

    NARCIS (Netherlands)

    Ros JPM; van der Poel P; Etman EJ; Montfoort JA; LAE

    1995-01-01

    Dit rapport over de farmaceutische industrie is gepubliceerd binnen het Samenwerkingsproject Procesbeschrijvingen Industrie Nederland (SPIN). In het kader van dit project is informatie verzameld over industriele bedrijven of industriele processen ter ondersteuning van het overheidsbeleid op het

  16. Dental erosion and consumption of industrialized beverages in a group of children in Recife/Pernambuco, Brazil = Erosão dental e consumo de bebidas industrializadas em crianças de Recife/Pernambuco, Brasil

    Directory of Open Access Journals (Sweden)

    Araújo, Natália Costa

    2009-01-01

    Full Text Available Objetivo: Observar a ocorrência de erosão dental em um grupo de crianças de 5 a 12 anos de idade, da cidade do Recife/Pernambuco e sua associação com o consumo de bebidas industrializadas. Metodologia: A amostra foi composta por 970 crianças e a coleta de dados abrangeu entrevistas e exames clínicos. Considerou-se como erosão dental a presença de lesões cervicais em superfícies vestibulares com as seguintes características clínicas: lesões largas, rasas, sem ângulos nítidos, com superfície lisa e em forma de “U”. Para a análise estatística foi utilizado o teste Qui-quadrado de Pearson. Resultados: A ocorrência de erosão dental na amostra estudada foi de 3,4%, sendo 2,4% para a dentição decídua e 1,8% para a dentição permanente. Tanto na dentição decídua, quanto na permanente, a erosão dental foi associada ao consumo de bebidas industrializadas (P=0,02 e de refrigerantes especificamente (P=0,004. Conclusão: Neste estudo, a ocorrência de erosão dental foi baixa, sugerindo que este tipo de agravo não se configura em um problema de saúde pública para a população investigada

  17. Species richness of testate amoebae in different environments from the upper Paraná river floodplain (PR/MS = Riqueza de amebas testáceas em diferentes ambientes da planície de inundação do alto rio Paraná (PR/MS

    Directory of Open Access Journals (Sweden)

    Deise de Morais Costa

    2011-07-01

    Full Text Available This study evaluated the species richness of testate amoebae in the plankton from different environments of the upper Parana river floodplain. Samplings were performed at subsurface of pelagic region from twelve environments using motorized pump and plankton net (68 ƒÝm, during four hydrological periods. We identified 67 taxa, distributed in seven families and Arcellidae, Difflugiidae and Centropyxidae were the most representative families. Higher values of species richness were observed in the lakes (connected and isolated during the flood pulses. Centropyxis aculeata, Difflugia gramem and D.pseudogramem were frequent throughout the study period. Seasonal variability of species in the channels and isolated lakes was evidenced by beta diversity. Besides that, in the rivers, extreme changes in species composition were verified during the high-water period. Our results highlight the importance of the present study to improve the knowledge about the diversity and geographic distribution of these organisms in Brazil and emphasize the importance of current flow in the displacement of testate amoebae from their preferredhabitats, marginal vegetation and sediment.Este estudo objetivou avaliar a riqueza de taxons de amebas testaceas no plancton de diferentes ambientes da planicie de inundacao do alto rio Parana. Foram amostrados 12 pontos da regiao pelagica em diferentes ambientes (rios, canais e lagoas e em quatro periodos hidrologicos. Foram identificados 67 taxons, distribuidos em sete familias. Arcellidae, Difflugiidae e Centropyxidae foram as familiasmais especiosas. Nas lagoas (abertas e fechadas, durante os pulsos de inundacao, foram observados os maiores valores para a riqueza de especies. Centropyxis aculeata, Difflugia gramem e D. pseudogramem foram frequentes durante todo o periodo estudado. Os dados obtidos pela diversidade beta evidenciaram a variabilidade sazonal das especies nos canais e lagoas fechadas. Nos rios, as alteracoes

  18. Industrial electrification

    International Nuclear Information System (INIS)

    Melvin, J.G.

    1983-03-01

    The technical and economic scope for industrial process electrification in Canada is assessed in the light of increasing costs of combustion fuels relative to electricity. It is concluded that electricity is capable of providing an increasing share of industrial energy, eventually aproaching 100 percent. The relatively low cost of electricity in Canada offers industry the opportunity of a head start in process electrification with consequent advantages in world markets both for industrial products and for electrical process equipment and technology. A method is described to promote the necessary innovation by providing access to technology and financing. The potential growth of electricity demand due to industrial electrification is estimated

  19. Neonatal Phosphate Nutrition Alters <em>in em>Vivo> and <em>in em>Vitro> Satellite Cell Activity in Pigs

    Directory of Open Access Journals (Sweden)

    Chad H. Stahl

    2012-05-01

    Full Text Available Satellite cell activity is necessary for postnatal skeletal muscle growth. Severe phosphate (PO4 deficiency can alter satellite cell activity, however the role of neonatal PO4 nutrition on satellite cell biology remains obscure. Twenty-one piglets (1 day of age, 1.8 ± 0.2 kg BW were pair-fed liquid diets that were either PO4 adequate (0.9% total P, supra-adequate (1.2% total P in PO4 requirement or deficient (0.7% total P in PO4 content for 12 days. Body weight was recorded daily and blood samples collected every 6 days. At day 12, pigs were orally dosed with BrdU and 12 h later, satellite cells were isolated. Satellite cells were also cultured <em>in vitroem> for 7 days to determine if PO4 nutrition alters their ability to proceed through their myogenic lineage. Dietary PO4 deficiency resulted in reduced (<em>P> < 0.05 sera PO4 and parathyroid hormone (PTH concentrations, while supra-adequate dietary PO4 improved (<em>P> < 0.05 feed conversion efficiency as compared to the PO4 adequate group. <em>In vivoem> satellite cell proliferation was reduced (<em>P> < 0.05 among the PO4 deficient pigs, and these cells had altered <em>in vitroem> expression of markers of myogenic progression. Further work to better understand early nutritional programming of satellite cells and the potential benefits of emphasizing early PO4 nutrition for future lean growth potential is warranted.

  20. Applications mechanisms of energetic efficiency in energy-intensive industries segments in Brazil: opportunities for current technological structures; Aplicacoes de mecanismos de eficiencia energetica em segmentos industriais energo-intensivos brasileiros: oportunidades relativas as atuais estruturas tecnologicas

    Energy Technology Data Exchange (ETDEWEB)

    Dorileo, Ivo Leandro [Universidade Federal do Mato Grosso (NIEPE/UFMT), Cuiaba, MT (Brazil). Nucleo Interdisciplinar de Estudos em Planejamento; Berni, Mauro Donizeti [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico; Paccola, Jose Angelo; Silva Junior, Herculano Xavier da; Bernardes, Cyro Barbosa [MCPAR Engenharia, Campinas, SP (Brazil)

    2010-07-01

    This work presents energy efficiency mechanisms analysis in the Brazilian industrial sector. Significant energy savings can be made in this sector and rely on urgent widespread implementation of mechanisms. The experience of the developed countries is demonstrated and serves as base for the critical evaluation of the Brazilian situation, considering the current technological period, the investments and economic perspectives in industrial segments of pulp and paper, iron and steel and non-ferrous metals. (author)

  1. O Custo Meta no Desenvolvimento de Novos Produtos: um caso em indústria de conserva de pescadoThe Target Cost in New Product Development: a case study in the canned fish industryEl Costo Meta en el Desarrollo de Nuevos Productos: un caso en industria de conserva de pescado

    Directory of Open Access Journals (Sweden)

    CARDOSO, Rodrigo dos Santos

    2006-09-01

    Full Text Available RESUMOO artigo tem como objetivo demonstrar a utilização da metodologia do custo meta em uma indústria de conserva de pescado quando do lançamento de um novo líquido de cobertura, que se caracteriza neste ramo como um novo produto. Assim, realizou-se uma pesquisa exploratória, por meio da análise de um caso, com abordagem predominantemente qualitativa. Procurou-se inicialmente propiciar a conceituação da metodologia do custo meta ou alvo e sua principal ferramenta, a engenharia de valor. Em seguida, demonstra-se a aplicação desta metodologia em um caso de desenvolvimento de novo produto em uma indústria de conserva de pescado. Os resultados da pesquisa evidenciam a viabilidade da utilização da metodologia do custo meta neste seguimento de produto, com vistas ao atendimento das exigências do mercado consumidor.ABSTRACTThe present work has the objective of demonstrating the use of target cost methodology in a canned fish industry in the launching of new liquid topping, which is a new product in the field. An exploratory research was made by a case study with qualitative approach. At first the concept of the target cost methodology was provided, the value engineering. Then the implementation of such methodology was demonstrated in a product development case study in a canned fish industry. The results of the research evidenced the viability of the use of the target cost methodology in the product field, in order to attempt to the market exigencies.RESUMENEl artículo tiene por finalidad demostrar el uso de la metodología del costo meta en una industria de conservas de pescado cuando se realizó el lanzamiento de un nuevo líquido de cobertura, que en este ramo se considera un producto nuevo. Para esto se realizó una investigación exploratoria, por medio del análisis de un caso, con planteamiento predominantemente cualitativo. Inicialmente se buscó propiciar la conceptuación de la metodología del costo meta y su principal

  2. Análise comparativa e avaliação de prioridades de competição em três cadeias de suprimentos do setor petroquímico Comparative analysis and competitive priorities assessment in three supply chains from the petrochemical industry

    Directory of Open Access Journals (Sweden)

    Brian Silva

    2012-04-01

    Full Text Available Este artigo analisa comparativamente e avalia qualitativamente prioridades de competição em três cadeias de suprimentos da indústria petroquímica, A, B e C. A pesquisa foi feita no segundo semestre de 2006. O artigo revisa definições sobre cadeias de suprimentos, destacando principalmente a forma de rede que estas podem assumir. A seguir, apresenta os três casos estudados. A pesquisa identificou sete prioridades de competição em petroquímica: qualidade, entrega, flexibilidade, custo, inovação, comunicação e segurança, que foram desdobradas em dimensões. As prioridades foram ponderadas por gestores, com apoio do método multicriterial AHP, chegando-se a uma estrutura de competitividade, que apoiou a avaliação, baseada em julgamento. Ao fim, as diferenças entre as prioridades e os desempenhos julgados formaram uma estrutura de objetivos para as cadeias. A deve priorizar qualidade, B flexibilidade e C redução de custo.The purpose of this article is to comparatively analyze and quantitatively assess the competitive priorities in three supply chains from the petrochemical industry: A, B, and C. The research was carried out in the second half of 2006. The article revises definitions on supply chains with emphasis on network shapes. Then, it presents the three case studies: A, B, and C. The research identifies seven competitive priorities in the petrochemical industry: quality, lead-time, flexibility, cost, innovation, communication and safety, which were unfolded in dimensions. The priorities were analyzed by managers with the support of the AHP multi-criteria method, reaching a competitiveness structure that supported the assessment based on judgment. Finally, the differences betweenthe priorities and the assessed performances formed a structure of objectives for the chains. Results showed that Ashould prioritize quality,B should prioritize flexibility, while C should prioritize cost reduction.

  3. Avaliação das propriedades físicas, químicas e sensorial de preferência de goiabas em calda industrializadas Physical, chemical and sensorial analyses of industrialized guava in syrup

    Directory of Open Access Journals (Sweden)

    A. C. K. Sato

    2004-12-01

    Full Text Available Quatro marcas de goiabas em calda foram submetidas a análises físico-químicas, de cor e textura instrumentais e teste sensorial de preferência, a fim de avaliar as diferenças entre os produtos comerciais. As mesmas análises foram efetuadas em uma goiaba in natura madura, a fim de avaliar os possíveis efeitos do processamento na qualidade do produto. De maneira geral, observou-se grandes diferenças entre os produtos das diferentes marcas, e muitas vezes entre os frutos de um mesmo fabricante. As análises químicas mostraram que o teor de açúcares da maior parte dos produtos está entre 22 e 30%, com exceção de uma amostra que mostrou um valor bem mais elevado (ao redor de 40%. A análise sensorial mostrou que esta amostra com maior teor de açúcares foi a mais preferida em relação à doçura. Na análise de cor foram observados menores valores de a* em relação à fruta in natura, possivelmente devido à degradação dos carotenóides da goiaba. A luminosidade das goiabas em calda também é maior que da fruta in natura, devido à presença dos açúcares. Esta entrada de açúcares na fruta junto com o processamento térmico utilizado pode ter causado possível gelificação da pectina, aumentando a dureza, firmeza e elasticidade de algumas amostras processadas, quando comparadas à fruta fresca. No entanto, em alguns casos foi visível o efeito de processamentos mais drásticos, que levaram à perda da estrutura celular, observada pelos baixos valores das propriedades mecânicas. Em relação à textura e aparência, a amostra mais dura foi a preferida.Four brands of canned guava were submitted to physico-chemical, sensory (preference test and instrumental color and texture analyses, in order to evaluate the differences between commercial products. The same analyses were made on a fresh, mature guava, to evaluate possible effects of processing on the quality of the final product. There were considerable differences between the

  4. Explorando práticas do desenvolvimento de produtos em pequenas e médias empresas do setor de equipamentos médico-hospitalares Exploring new product development practices in small and medium enterprises in the medical device industry

    Directory of Open Access Journals (Sweden)

    Glauco Henrique de Sousa Mendes

    2012-01-01

    Full Text Available Fatores de sucesso no processo de desenvolvimento de produtos (PDP em empresas de pequeno e médio porte (PMEs do setor de equipamentos médico-hospitalares, do Estado de São Paulo, são identificados e analisados. Um modelo conceitual para explicar o relacionamento entre práticas de gestão do PDP e o desempenho dos novos produtos foi elaborado e testado. O modelo considera oito fatores: vantagem (ou diferenciação do produto, habilidades de marketing, fontes de tecnologia, habilidades da empresa, habilidades do líder de projeto, integração funcional, organização da equipe de projeto e qualidade de execução do PDP. Uma pesquisa de levantamento (survey foi realizada em 30 empresas desse setor, obtendo-se dados de 49 projetos de novos produtos. Os resultados apontam que a gestão do PDP, nessas empresas, deve atentar para ações que promovam as habilidades de marketing e a integração funcional durante o PDP e a qualidade na execução das atividades de pré-desenvolvimento, pois esses fatores, em relação aos demais, têm um impacto positivo relativamente maior no sucesso do novo produto.Critical success factors in new product development (NPD in small and medium enterprises (SMEs in the medical device industry are identified and analyzed. A conceptual model to explain the relationship between management practices and NPD performance was developed and tested. The model considers eight factors: product advantage, marketing skills, sources of technology, company skills, project leader skills, cross-functional integration, project teams' organization, and NPD proficiency. A survey was carried out in 30 companies in this industry collecting data from 49 new product projects. The results highlight the importance for this industry to emphasize activities related to marketing skills, cross-functional integration, and NPD proficiency since these factors have a positive influence on the new product success. Theoretical and managerial

  5. Constituents from <em>Vigna em>vexillata> and Their Anti-Inflammatory Activity

    Directory of Open Access Journals (Sweden)

    Guo-Feng Chen

    2012-08-01

    Full Text Available The seeds of <em>Vigna em>genus are important food resources and there have already been many reports regarding their bioactivities. In our preliminary bioassay, the chloroform layer of methanol extracts of<em> V. vexillata em>demonstrated significant anti-inflammatory bioactivity. Therefore, the present research is aimed to purify and identify the anti-inflammatory principles of <em>V. vexillataem>. One new sterol (1 and two new isoflavones (2,3 were reported from the natural sources for the first time and their chemical structures were determined by the spectroscopic and mass spectrometric analyses. In addition, 37 known compounds were identified by comparison of their physical and spectroscopic data with those reported in the literature. Among the isolates, daidzein (23, abscisic acid (25, and quercetin (40 displayed the most significant inhibition of superoxide anion generation and elastase release.

  6. Loss reduction in industrial motor systems: the structure of the Brazilian program structure focusing the autosustainability (optimization of industrial motor systems); Reducao de perdas em sistemas motrizes industriais: a estrutura do programa brasileiro com foco na autosustentabilidade (otimizacao de sistemas motrizes industriais)

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Vanda Alves dos; Soares, George Alves; Perrone, Fernando Pinto Dias; Ferreira, Carlos Aparecido; Oliveira, Humberto Luiz de; Motta, Braulio Romano; Silva, Humberto Reis Braga da [ELETROBRAS, Rio de Janeiro, RJ (Brazil). Dept. de Desenvolvimento de Projetos Especiais. Div. de Projetos Setoriais de Eficiencia Energetica]. E-mails: vandaas@eletrobras.com; georgesoares@eletrobras.com; carlosaparecido@eletrobras.com; humberto.oliveira@eletrobras.com; brauliorm@eletrobras.com; hhbraga@eletrobras.com

    2006-07-01

    This paper presents the achievements and goals of the Industrial Motor System Optimization Project as developed by the PROCEL INDUSTRIA -Brazilian Energy Efficiency Industrial Program, within the scope of PROCEL - National Program for Electric Power Conservation, carried out ELETROBRAS since 1985. Its main objective is to minimize losses in the motor driven systems already installed in the Brazilian industry. In order to implement this program, ELETROBRAS is continuous making agreements with the state industry federations aiming to develop mechanisms and to manage energy efficiency implementation projects looking forward its self supporting. PROCEL INDUSTRIA aims to reduce the waste of electric energy in the industrial sector, to increase the industries competition, by reducing their costs and to contribute to the preservation and cleanness of environment. (author)

  7. Wood and natural gas as fuels for tunnel kilns in the clay-product industry; Serragem e gas natural como fontes energeticas em fornos tuneis na industria ceramica vermelha

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Gabriel M. dos; Bazzo, Edson; Nicolau, Vicente de P.; Oliveira, Amir A.M. [Santa Catarina Univ., Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica]. E-mails: mann@emc.ufsc.br; ebazzo@emc.ufsc.br; vicente@lmpt.ufsc.br; amirol@emc.ufsc.br

    2000-07-01

    The clay-product industry is responsible to large part of the thermal energy consumption, especially on drying and burning process. In spite of the success obtained with the burning of wood like principal fuel for tunnel kilns, the clay-product industries of Santa Catarina have looked for alternatives to substitute it. The interest appears especially due to imminent shortage of the wood on the market and due to possibility of use natural gas as a good and environmentally favorable alternative to reduce the energy specific consumption of the kilns, to increase the production and to improve the quality of the ceramic products. Nowadays, the natural gas is more expensive when compared with the wood. However, we believe that additional studies can place this fuel as a viable alternative to the clay-product industries. (author)

  8. Process industry properties in nuclear industry

    International Nuclear Information System (INIS)

    Zheng Hualing

    2005-01-01

    In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

  9. Momentos em freios e em embraiagens

    OpenAIRE

    Mimoso, Rui Miguel Pereira

    2011-01-01

    Dissertação para obtenção do Grau de Mestre em Mestrado Integrado em Engenharia Mecânica Nesta dissertação reúnem-se os modelos de cálculo utilizados na determinação dos momentos em freios e em embraiagens. Neste trabalho consideram-se os casos de freios e embraiagens de atrito seco e atrito viscoso. Nos freios de atrito viscoso são considerados casos em que as características dos fluidos não são induzidas, e outros em que são induzidas modificações a essas mesmas características. São a...

  10. Emissão de gases de efeito estufa no ciclo de vida do etanol: estimativa nas fases de agricultura e industrialização em Minas Gerais Greenhouse gas emissions in the life cycle of ethanol: estimation in agriculture and industrialization stages in Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Juan Carlos Claros Garcia

    2010-09-01

    Full Text Available O presente estudo apresenta uma estimativa da emissão de gases de efeito estufa (CO2, CH4 e N2O nas etapas de agricultura e industrialização de cana-de-açúcar para produção de etanol em usinas localizadas no Estado de Minas Gerais. Princípios de Avaliação do Ciclo de Vida foram considerados na quantificação das emissões. Consideraram-se as emissões no consumo de combustíveis, utilização de insumos da agricultura, liberação de N2O no solo, emissões na queima da cana-de-açúcar e utilização de produtos químicos em 11 destilarias. Os resultados mostram uma emissão total de 1.539,60 kg CO2eq/ha·ano, com maior proporção para as emissões decorrentes da queima de cana-de-açúcar e consumo de combustíveis, os quais, em conjunto, representam mais de 50% do total de emissões.This research presents an estimate of greenhouse gas emissions (CO2, CH4 e N2O in the stages of agriculture and sugarcane industrialization for the production of ethanol in mills located in the state of Minas Gerais, Brazil. Life Cycle Assessment principles were considered in the quantification of emissions. The use of fuels, agricultural inputs, N2O emissions on soil, sugarcane burning emissions and use of chemical products of 11 mills were considered in this study. The results show a total emission of 1,539.60 kg CO2eq/ha·year, considering as the main key sources: sugarcane burning and use of fuels, which account for more than 50% of the total emissions.

  11. Indústria cultural e infância: estudo sobre formação de valores em crianças no universo do jogo eletrônico Cultural industry and childhood: a study about the building of values in children in the world of electronic games

    Directory of Open Access Journals (Sweden)

    Silvia Rosa Silva Zanolla

    2007-12-01

    Full Text Available Esse trabalho parte do pressuposto de que o jogo eletrônico influencia a formação cultural das crianças na contemporaneidade. Essa afirmação fundamenta-se na teoria crítica da sociedade, sobretudo, em um de seus principais pensadores, T. W. Adorno, que, em conjunto com M. Horkheimer, cunhou o conceito de indústria cultural em 1947. Elemento desta indústria, o jogo eletrônico, como produto de consumo, constitui-se como um instrumento de lazer e entretenimento, cujo alcance é cada vez mais amplo nas brincadeiras infantis. Isso significa que o conteúdo desses jogos e a identificação com seus personagens são vetores importantes de referência para analisar a constituição da identidade infantil e a emergência de valores na sociedade atual.This work starts from the assumption that electronic games influence today's children's cultural formation. This affirmation is based on the critical theory of society, especially by one of its main thinkers, T. W. Adorno, who, along with M. Horkheimer, created the concept of culture industry in 1947. As elements of this culture, and as consumption products, electronic games are an instrument for leisure and entertainment, with an increasingly higher reach in children's play. This means that the content of these games and children's identification with their characters are important reference points to analyze the constitution of children's identity and the urgent need for values in society today.

  12. Redução de vitamina C em suco de caju (Anacardium occidentale L. industrializado e cajuína Vitamin C degradation in industrialized cashew juice (Anacardium occidentale L. and in cajuina

    Directory of Open Access Journals (Sweden)

    Eráclito Silva Lima

    2007-10-01

    Full Text Available Vitamin C degradation was evaluated in industrialized cashew juice of high pulp content and in cajuina by the method of Tillmans during eleven days of storage after the opening of the flask. For recently opened juices, vitamin C was found in the concentration range of 112 to 170 mg for 100 g of juice. The degradation of vitamin C in industrialized cashew juices changes when different additives are used. All of the cajuinas presented a vitamin C content below that specified on the label.

  13. Avaliação do nível de consciência ambiental em meios de hospedagem: uma abordagem exploratória / Evaluation of environmental awareness level in hotel industry: an exploratory approach

    Directory of Open Access Journals (Sweden)

    André Luís Policani Freitas

    2010-09-01

    Full Text Available Nos últimos anos um crescente número de estabelecimentos hoteleiros vem adotando práticas direcionadas à redução de recursos com a justificativa de preservação do meio ambiente. Entretanto, um dos grandes desafios é detectar se tais práticas realmente refletem uma consciência ambiental ou apenas destinam-se a redução de custos. Neste contexto, este artigo propõe uma abordagem exploratória para avaliar o nível de consciência ambiental em meios de hospedagem, segundo a percepção dos empresários e hóspedes. Um estudo foi realizado com o objetivo de captar: (i o perfil dos estabelecimentos e dos hóspedes; (ii o nível de consciência ambiental do administrador/empresário e dos hóspedes; (iii as ações praticadas pelos estabelecimentos; e (iv a postura dos hóspedes em relação ao meio ambiente e à hospedagem.

  14. Aprendizagem Tecnológica e Inovação Industrial em Economias Emergentes: uma Breve Contribuição para o Desenho e Implementação de Estudos Empíricos e Estratégias no Brasil

    Directory of Open Access Journals (Sweden)

    Paulo N. Figueiredo

    2004-01-01

    Full Text Available The theme of industrial innovation strategies was formally brought into the government agenda in Brazil during the late-1960s. Since then, there has been a profusion of studies based on descriptions and analysis relative to the design and implementation of industrial innovation strategies. Despite the merit of the existing works in this field in Brazil, there still is a scarcity of both conceptual and, in particular, management approaches to contribute to improving innovation strategies in Brazil. Thus, the focus of this article is centred on two tasks. The first is to clarify some definitions underlying the design and implementation of empirical studies and industrial innovation strategies from the perspective on technological learning in emerging economies. The second is to present some metrics associated with the design and implementation of such strategies and empirical studies, particularly in Brazil. The article seeks to clarify and enlarge the understanding of the intricate process of technological development in the context of emerging economies and, thus, assist researchers and managers involved with industrial innovation management in Brazil.O tema estratégia de inovação industrial entrou formalmente na agenda de discussão e ação governamental no Brasil no final dos anos 1960. Desde então, tem havido uma profusão de estudos baseados em descrições, análises e propostas relativas a estratégias de inovação industrial no País. A despeito do grande mérito dos vários trabalhos neste campo no Brasil, ainda há uma escassez de contribuições conceituais e, principalmente, gerenciais voltadas para o aprimoramento do desenho e da implementação de estudos empíricos e de tais estratégias. Por isso, este artigo tem seu foco em duas tarefas: a primeira é clarificar certas definições relativas ao desenho e implementação de estudos empíricos e de estratégias de inovação industrial a partir da perspectiva de aprendizagem

  15. Industrial Robots.

    Science.gov (United States)

    Reed, Dean; Harden, Thomas K.

    Robots are mechanical devices that can be programmed to perform some task of manipulation or locomotion under automatic control. This paper discusses: (1) early developments of the robotics industry in the United States; (2) the present structure of the industry; (3) noneconomic factors related to the use of robots; (4) labor considerations…

  16. Industrial symbiosis

    DEFF Research Database (Denmark)

    Sacchi, Romain; Remmen, Arne

    2017-01-01

    This study examines the development of industrial symbiosis through a practical model for physical, organizational, and social interactions in six different cases from around the world. The results provide a framework that can be used by industrial symbiosis practitioners to facilitate the creation...

  17. 2001 Industry Studies: Services Industry

    National Research Council Canada - National Science Library

    Cervone, Michael

    2001-01-01

    .... has maintained its economic strength in traditional services industries such as transportation, tourism, public utilities, finance and insurance, accounting, engineering, architecture, medical, legal...

  18. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2000-01-01

    The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

  19. Industry honoured

    CERN Multimedia

    2008-01-01

    CERN has organised a day to thank industry for its exceptional contributions to the LHC project. Lucio Rossi addresses CERN’s industrial partners in the Main Auditorium.The LHC inauguration provided an opportunity for CERN to thank all those who have contributed to transforming this technological dream into reality. Industry has been a major player in this adventure. Over the last decade it has lent its support to CERN’s teams and participating institutes in developing, building and assembling the machine, its experiments and the computing infrastructure. CERN involved its industrial partners in the LHC inauguration by organising a special industry prize-giving day on 20 October. Over 70 firms accepted the invitation. The firms not only made fundamental contributions to the project, but some have also supported LHC events in 2008 and the inauguration ceremony through generous donations, which have been coordinated by Carmen Dell’Erba, who is responsible for secu...

  20. Industrial Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund

    2011-01-01

    generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...... of the system industry has to inform at the planning stage and afterwards in yearly reports on their waste arising and how the waste is managed. If available such information is very helpful in obtaining information about that specific industry. However, in many countries there is very little information...

  1. Identified EM Earthquake Precursors

    Science.gov (United States)

    Jones, Kenneth, II; Saxton, Patrick

    2014-05-01

    recurrence, duration, and frequency response. At the Southern California field sites, one loop antenna was positioned for omni-directional reception and also detected a strong First Schumann Resonance; however, additional Schumann Resonances were absent. At the Timpson, TX field sites, loop antennae were positioned for directional reception, due to earthquake-induced, hydraulic fracturing activity currently conducted by the oil and gas industry. Two strong signals, one moderately strong signal, and approximately 6-8 weaker signals were detected in the immediate vicinity. The three stronger signals were mapped by a biangulation technique, followed by a triangulation technique for confirmation. This was the first antenna mapping technique ever performed for determining possible earthquake epicenters. Six and a half months later, Timpson experienced two M4 (M4.1 and M4.3) earthquakes on September 2, 2013 followed by a M2.4 earthquake three days later, all occurring at a depth of five kilometers. The Timpson earthquake activity now has a cyclical rate and a forecast was given to the proper authorities. As a result, the Southern California and Timpson, TX field results led to an improved design and construction of a third prototype antenna. With a loop antenna array, a viable communication system, and continuous monitoring, a full fracture cycle can be established and observed in real-time. In addition, field data could be reviewed quickly for assessment and lead to a much more improved earthquake forecasting capability. The EM precursors determined by this method appear to surpass all prior precursor claims, and the general public will finally receive long overdue forecasting.

  2. Dermatoses em renais cronicos em terapia dialitica

    Directory of Open Access Journals (Sweden)

    Luis Alberto Batista Peres

    2014-03-01

    Full Text Available Objetivo: As desordens cutâneas e das mucosas são comuns em pacientes em hemodiálise a longo prazo. A diálise prolonga a expectativa de vida, dando tempo para a manifestação destas anormalidades. Os objetivos deste estudo foram avaliar a prevalência de problemas dermatológicos em pacientes com doença renal crônica (DRC em hemodiálise. Métodos: Cento e quarenta e cinco pacientes com doença renal crônica em hemodiálise foram estudados. Todos os pacientes foram completamente analisados para as alterações cutâneas, de cabelos, mucosas e unhas por um único examinador e foram coletados dados de exames laboratoriais. Os dados foram armazenados em um banco de dados do Microsolft Excel e analisados por estatística descritiva. As variáveis contínuas foram comparadas pelo teste t de Student e as variáveis categóricas utilizando o teste do qui-quadrado ou o teste Exato de Fischer, conforme adequado. Resultados: O estudo incluiu 145 pacientes, com idade média de 53,6 ± 14,7 anos, predominantemente do sexo masculino (64,1% e caucasianos (90,0%. O tempo médio de diálise foi de 43,3 ± 42,3 meses. As principais doenças subjacentes foram: hipertensão arterial em 33,8%, diabetes mellitus em 29,6% e glomerulonefrite crônica em 13,1%. As principais manifestações dermatológicas observadas foram: xerose em 109 (75,2%, equimose em 87 (60,0%, prurido em 78 (53,8% e lentigo em 33 (22,8% pacientes. Conclusão: O nosso estudo mostrou a presença de mais do que uma dermatose por paciente. As alterações cutâneas são frequentes em pacientes em diálise. Mais estudos são necessários para melhor caracterização e manejo destas dermatoses.

  3. Medição de desempenho ambiental baseada em método multicriterial de apoio à decisão: estudo de caso na indústria automotiva Environmental performance measurement supported by a multicriterial approach: a case study in a manufacturing operation in the automotive industry

    Directory of Open Access Journals (Sweden)

    Sheila Oliveira de Castro da Luz

    2006-12-01

    Full Text Available Este artigo apresenta e discute um estudo de caso sobre medição de desempenho ambiental (MDA baseada em um método multicriterial de apoio à decisão, o AHP. A medição foi feita em uma operação de manufatura da indústria automotiva, cujo Sistema de Gestão Ambiental (SGA é certificado conforme a norma ISO 14001:2004. A metodologia foi desenvolvida de forma a viabilizar a sua extensão a outras indústrias ou tipos de operação. O artigo inicia apresentando uma discussão sobre desempenho empresarial e ambiental, justificando a necessidade de um índice para medir e comunicar este desempenho. Cita-se o método multicriterial usado e, a seguir, propõe-se a metodologia de medição, na qual se formulam construtos de sustentação do índice, calculam-se importâncias relativas dos construtos e especificam-se os indicadores. O índice foi calculado para o desempenho atual, chegando-se a um desempenho ambiental próximo a 85% do máximo possível. Os construtos empregados na medição são: resíduos sólidos; efluentes; emissões atmosféricas; uso de recursos naturais; e gestão ambiental. As principais oportunidades de melhoria ambiental são reduções no uso de recursos naturais e em emiss��es atmosféricas.This paper presents and discusses a case concerning environmental performance measurement (MDA, in which a multicriterial approach, the AHP, was used. The measurement took place in a manufacturing operation in the automotive industry, whose environmental management system (SGA is certified according to ISO 14001: 2004. The methodology was developed in such a way that it is feasible to reproduce it in other industries or operations. The paper discusses business and environmental performance, justifying the need for a numerical index, in order to establish such performances. We propose the measurement methodology, in which we formulate hierarchical constructs for sustaining the index, weighed by the AHP and measured by indicators

  4. Caracterização do arenito piramboia da Fazenda São João em Analândia, SP, e sua utilização industrial

    OpenAIRE

    Roque Yuri Tandel

    1994-01-01

    A mina de areia da Sibelco Mineração Ltda., localizada no Município de Analândia, Estado de São Paulo, foi estudada visando a definição dos principais parâmetros utilizados para caracterizar areias para uso em indústrias de fundição e de vidro. Os trabalhos de campo na área de estudo permitiram o reconhecimento de quatro unidades operacionais: Formação Pirambóia unidade inferior, Formação Pirambóia unidade superior, Formação Botucatu intemperizada e solo de alteração. Ênfase especial foi dada...

  5. Governança e gestão social em redes empresariais: análise de três arranjos produtivos locais (APLs de confecções no estado do Rio de Janeiro Governance and social management of business networks: an analysis of three textile industry local production systems in the state of Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Lamounier Erthal Villela

    2009-10-01

    Full Text Available Este artigo avalia as dificuldades encontradas em redes empresariais situadas em três cidades do Rio de Janeiro - Cabo Frio, Petrópolis e Nova Friburgo - para a condução de uma governança sustentada na participação e na deliberação dos atores envolvidos nos APLs ali existentes. A teoria de redes empresariais, de APLs e de governança não espelha integralmente a realidade empírica, havendo dificuldades a serem superadas, não previstas nas discussões conceituais. Foram feitas entrevistas com diversos stakeholders de arranjos produtivos do ramo de confecções daqueles territórios, entre eles empresários, representantes dos poderes públicos municipais e estaduais, instituições de apoio empresarial, associações e sindicatos, buscando identificar como se dão os processos de tomada de decisão e de gestão coletiva. Como resultado, foram mapeados problemas relativos à pouca capacidade de gestão dos empresários, extrema heterogeneidade dos stakeholders, em termos tanto de tamanho quanto de interesses, e um grau de confiança ainda incipiente entre os envolvidos, resultando em comportamentos ora predatórios, ora colaborativos, por parte dos empresários.This article assesses the difficulties faced by three local production systems (LPSs in the State of Rio de Janeiro, trying to verify whether or not their reality reflects the theory of governance and business networks. The hypothesis that drives this research is that the reality is not close to the theoretical ideal world, and that there are many issues which were not considered by the conceptual discussions. A field research and a quality analysis were performed. The data was obtained by means of a number of in-depth interviews with stakeholders in textile industry LPSs in the cities of Nova Friburgo, Petropolis and Cabo Frio (such as owners, government representatives and union representatives. According to the analysis, there are many issues that the theory cannot deal with

  6. Excreção urinária de fenol em trabalhadores de indústrias de calçados expostos ao benzeno Urinary output of phenol in workmen exposed to benzene in the shoe industry

    Directory of Open Access Journals (Sweden)

    Nilda Gallego Gándara de Fernícola

    1976-12-01

    Full Text Available Foi utilizada a excreção urinária de fenol como indicador biológico de exposição profissional ao benzeno, em uma amostra populacional de 79 trabalhadores de indústrias de calçados no município de Franca, SP, Brasil e em 65 pessoas que realizam trabalhos domésticos com colas, contendo benzeno, para indústrias de calçados no município de São Paulo. Os valores médios encontrados, respectivamente 6,5 e 4,2 mg/g de creatinina, permitiram caracterizar diferentes graus de exposição. A primeira população (trabalhadores de indústrias de calçados de Franca, pôde ser considerada como um todo, pelo menos, no ((período pré-patogênico" da intoxicação profissional pelo benzeno.The authors analised the urinary excretion of phenol of a group of 79 shoemakers from Franca (State of S. Paulo - Brazil and of 65 persons who make shoes at home for shoe factories in the city of São Paulo, in order to evaluate their occupational exposure to "benzene present in the adhesives they use. The average values of 6.5 mg/g and 4.2 mg/g creat, respectively, lead the authors to conclude that the two populations have different degress of exposure. The first population (workers from Franca ought to be placed, at least in the prepathogenic period of chronic occupational poisoning.

  7. Prevalência da dor orofacial e seu impacto no desempenho diário em trabalhadores das indústrias têxteis do município de Laguna, SC Prevalence of orofacial pain and its impact on the oral health-related quality of life of textile industries workers of Laguna, SC, Brazil

    Directory of Open Access Journals (Sweden)

    Josimari Telino de Lacerda

    2011-10-01

    Full Text Available Foram examinadas as tendências em saúde da população idosa brasileira utilizando-se dados da Pesquisa Nacional por Amostra de Domicílios (1998-2008. O estudo incluiu uma amostra probabilística de 105.254 pessoas com > 60 anos de idade. A média da idade foi de 69 anos e 56% eram mulheres. Houve um aumento gradativo da boa autoavaliação da saúde (39,3%, 43,5% e 45,0% em 1998, 2003 e 2008, respectivamente e uma diminuição na prevalência de artrite, doença do coração e depressão autorreferidas. A prevalência da hipertensão (43.9%, 48.8% e 53.3%, respectivamente e do diabetes autorreferidos (10.3%, 13.0% e 16.1% respectivamente aumentou acentuadamente. A prevalência da incapacidade para realizar atividades da vida diária (alimentar-se, tomar banho ou ir ao banheiro permaneceu estável (6.5%, 6.4% e 6.9%, respectivamente. A realização de três ou mais consultas médicas nos 12 meses precedentes aumentou 21% entre 1998 e 2008. As hospitalizações diminuíram 10% no mesmo período. Essas tendências foram independentes do sexo e da idade. Os resultados mostram melhora em algumas dimensões da saúde dos idosos, mas não em todas. As mudanças no uso de serviços de saúde ocorreram como esperado em decorrência da expansão das atividades de atenção primária no Brasil.The aim of this study was to establish the prevalence of orofacial pain and its impact on the daily performance of workers in the textile industry in the municipality of Laguna, Brazil. A cross-sectional study involving all workers (n= 267 of the five textile industries of the municipality in 2004 was conducted. Data were obtained through the questionnaire proposed by Locker and Gruska to measure the Oral Impact on Daily Performance (OIDP indicator. Socio-demographic data such as gender, age, level of schooling, income, job function and absenteeism due to orofacial pain was collected. Data were descriptively analyzed and the prevalence ratios, confidence

  8. Industrial ecology.

    Science.gov (United States)

    Patel, C K

    1992-01-01

    Industrial ecology addresses issues that will impact future production, use, and disposal technologies; proper use of the concept should reduce significantly the resources devoted to potential remediation in the future. This cradle-to-reincarnation production philosophy includes industrial processes that are environmentally sound and products that are environmentally safe during use and economically recyclable after use without adverse impact on the environment or on the net cost to society. This will require an industry-university-government round table to set the strategy and agenda for progress. PMID:11607254

  9. Comparison of a burning mass ceramics coating in laboratory furnace and instrustrial furnace; Comparacao de queimas de uma massa ceramica de revestimento em forno de laboratorio e forno industrial

    Energy Technology Data Exchange (ETDEWEB)

    Soares, R.A.L., E-mail: robertoarruda@ifpi.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia do Piaui (IFPI), Terersina, PI (Brazil); Castro, J.R. de S. [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil)

    2012-07-01

    This work intends to analyze the differences obtained in the technological properties of a ceramic coating after firing in two distinct environments, laboratory furnace and industrial furnace. For this, was characterized a ceramic mass used in the production of porous coating. The analyzes were performed chemical, mineralogical and thermal mass in that. The specimens were obtained by compacting and burned in the maximum temperature of 1140 deg C in two furnaces, laboratory and industrial. The technological tests were performed linear shrinkage, water absorption, bulk density and mechanical strength. The microstructure was evaluated by ray-X diffraction and scanning electron microscopy. The results showed that both furnaces provided significant differences in analyzed specimens, such as increased strength and low water absorption in the fired samples in a laboratory furnace, for example. (author)

  10. Utilization of hair and nails as bio-indicators of contamination by heavy and toxic metals in industrial workers; Utilizacao de cabelos e unhas como bioindicadores de contaminacao por metais pesados e toxicos em trabalhadores de industrias

    Energy Technology Data Exchange (ETDEWEB)

    Vilhena Schayer Sabino, Claudia de; Silva, Ascanio Barros F.E.; Fernandes, Marcio Prado; Amaral, Angela Maria; Franco, Milton Batista; Guedes, Joao Bosco; Francisco, Dovenir; Castro de Assis, Adilson de

    1996-03-01

    Instrumental neutron activation analysis and atomic absorption spectrometry were performed on scalp hair and fingernail samples collected from a group of heavily exposed healthy mail industrial workers. The concentration of trace elements (As, Cd, Cr, Hg, Ni, Pb and Sb) were evaluated and compared for scalp and fingernails. Comparative studies demonstrated that concentration of certain elements were greater than those corresponding to non-exposed workers. (author). 4 refs., 6 tabs.

  11. CoJet technology for oxygen injection injection in EAFS - industrial gases supply and customers productivity improvements; Tecnologia CoJet para injecao de oxigenio em FEAS - fornecimento de gases e aumento da produtividade dos clientes

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Izaias Lucas; Zagury, Pedro Athias [White Martins Gases Industriais Ltda., Rio de Janeiro, RJ (Brazil)

    2010-07-01

    PRAXAIR is one of the largest industrial gases producers of the World, being present in more than 40 countries and strongly connected to the steel industry. PRAXAIR has experience to supply products and services to all kinds of steel mills. Several technologies developed by the Company, such as CoJet (a system to coherent oxygen jet injection in EAF and BOF furnaces), Slag Splashing (splashing slag to cover BOF furnaces walls increasing refractory wear campaign life), AOD (a process for specialty steel production) and others, are currently in commercial operation in different parts of the world. In Brazil, Praxair is the owner of White Martins, the largest industrial gases company in South America, present in nine countries of the continent. Company's portfolio includes atmospheric gases, carbonic gas production, acetylene, hydrogen, specialty and health and care gases, mixtures for welding, gas seamless steel cylinders, applications equipment, and storage and gases transportation. The Company also operates a natural gas liquefaction unit. In addition to technologies and process, Praxair / White Martins can also supply solutions for measurement, control and gases injection, according to strict safety and quality standards. The present work has the objective to show the benefits of the CoJet EAF System, oxygen injectors positioned in the furnace walls. In 2009, two systems have been installed in South American mills and the results achieved will be following discussed. (author)

  12. Ocorrência e identificação de espiroquetas intestinais em suínos em granjas de porte industrial de duas regiões criatórias do Estado do Rio Grande do Sul, em relação à medicação da ração Ocurrence and identification of swine intestinal spirochetes in industrial pig herds from two raising areas in the State of Rio Grande do Ssul, Brazil, in relation to feed medication

    Directory of Open Access Journals (Sweden)

    David Emilio Barcellos

    2003-08-01

    Full Text Available As infecções intestinais por espiroquetas em suínos, na fase que se segue ao alojamento nos prédios de recria, são predispostas por fatores como o estresse da movimentação, mistura entre animais imunes e excretores com leitões não imunes, deficiências nas condições ambientais e troca no tipo da ração usada. Para contrabalançar esses efeitos, é uma prática rotineira a inclusão de antimicrobianos à ração, em doses de promoção de crescimento ou de controle. O presente trabalho avaliou a ocorrência da infecção por Brachyspira spp. em rebanhos suínos do Estado do Rio Grande do Sul, tentando relacionar com o tipo de programa de uso de antimicrobianos adotado. Foram examinados 393 suabes retais colhidos de 38 granjas do RS (22 usando rações medicadas e 16 com ração sem medicação. A B. hyodysenteriae e B. pilosicoli foram detectadas respectivamente em 0% e 6,25% das granjas medicadas e de 31,8% e 45,5% das granjas não medicadas. Entre os suabes examinados, a B. hyodysenteriae e B. pilosicoli estavam presentes respectivamente em 0 e 0,6% dos materiais colhidos de granjas medicadas e de 3,9% e 7,3% em granjas não medicadas. O presente trabalho suporta a opinião de diversos autores que sugeriram a influência direta da inclusão de antimicrobianos à ração em doses de promoção de crescimento ou em dose de controle e a ocorrência de diarréias espiroquetais em leitões. Entretanto, pelas características multifatoriais desse tipo de patologia, seriam necessários estudos adicionais abrangendo um número maior de variáveis entre aquelas possivelmente envolvidas no desencadeamento das diarréias, antes que fosse obtida uma conclusão definitiva.Intestinal spirochaetal infections in pigs following transportation to growing facilities is predisposed by stressful factors such as contact between carriers and non-immune piglets, defficient environment and diet changes. To neutralize such effects, it is a common practice to

  13. ISO 14001 ENVIRONMENTL MANAGEMENT SYSTEMS IN GOVERNMENT AND INDUSTRY

    Science.gov (United States)

    Two new USEPA documents address environmental management systems (EMS) from the perspectives of government and industry and are offered as tools for understanding the process of the ISO 14000 Standards development and usefulness of an EMS approach. The first document, ISO 14001 -...

  14. Industrial practices

    International Nuclear Information System (INIS)

    Velasquez Torrez, Patricia Irma

    1999-01-01

    This document reports the industrial practices carried out by the author viewing the requirements fulfilled for obtention the academic degree in chemical engineering of the San Andres University - Bolivia

  15. Electronics Industry

    National Research Council Canada - National Science Library

    Ginter, Michael J; Andersen, James L; Becker, John A; Belliveau, Gerald E; Eppich, Frank J; Awai, Herman T; Hanko, David J; Hughes, Bob; Jones, Douglas; Larson, Kelly J

    2007-01-01

    .... area, New York State, Silicon Valley (California), Taiwan, and China. This approach provides a wide range of perspectives from which to examine the selected industry's current condition, outlook, and challenges...

  16. Bacteriophages of <em>Leuconostoc>, <em>Oenococcus>, and <em>Weissella>

    DEFF Research Database (Denmark)

    Kot, Witold; Neve, Horst; Heller, Knut J

    2014-01-01

    Leuconostoc (Ln.), Weissella, and Oenococcus form a group of related genera of lactic acid bacteria, which once all shared the name Leuconostoc. They are associated with plants, fermented vegetable products, raw milk, dairy products, meat, and fish. Most of industrially relevant Leuconostoc strains...... can be classified as either Ln. mesenteroides or Ln. pseudomesenteroides. They are important flavor producers in dairy fermentations and they initiate nearly all vegetable fermentations. Therefore, bacteriophages attacking Leuconostoc strains may negatively influence the production process....... Bacteriophages attacking Leuconostoc strains were first reported in 1946. Since then, the majority of described Leuconostoc phages was isolated from either dairy products or fermented vegetable products. Both lytic and temperate phages of Leuconostoc were reported. Most of Leuconostoc phages examined using...

  17. Industrial radiography

    International Nuclear Information System (INIS)

    1994-01-01

    This Health and Safety Executive Information Sheet on industrial radiography aims to inform directors and managers of industrial radiography companies on the safety precautions necessary to ensure that their personnel do not exceed dose guidelines for exposure to ionizing radiation. The Ionising Radiations Regulations 1985 (IRR85) require that exposure doses for radiographers are kept as low reasonably practicable. Equipment maintenance, and the employment of proper emergency procedures will help to ensure personnel safety. (UK)

  18. Industrial ceramics

    International Nuclear Information System (INIS)

    Mengelle, Ch.

    1999-04-01

    After having given the definition of the term 'ceramics', the author describes the different manufacturing processes of these compounds. These materials are particularly used in the fields of 1)petroleum industry (in primary and secondary reforming units, in carbon black reactors and ethylene furnaces). 2)nuclear industry (for instance UO 2 and PuO 2 as fuels; SiC for encapsulation; boron carbides for control systems..)

  19. Internationalization of companies in industrial clusters: a study of medical, dental and hospital supply industries in Ribeirão Preto - SP Internacionalización de empresas en clusters industriales: un estudio aplicado en el polo médico-hospitalar-odontológico de Ribeirão Preto - SP Internacionalização de empresas em clusters industriais: um estudo aplicado no polo médico-hospitalar-odontológioco de Ribeirão Preto - SP

    Directory of Open Access Journals (Sweden)

    Gustavo Barbieri Lima

    2011-03-01

    Full Text Available A trend, both national and international, has been identified in academic research, as well as in business and government. Micro, small and medium sized companies have sought to organize strategic networks of inter-organizational cooperation to be more competitive in their markets or even ensure survival in face of fierce competition arising from globalization. This research investigated relations of the internationalization process that allow these companies to cooperate in industrial clusters and local productive arrangements as opposed to penetration of individual companies in international markets. The method of case study was used to carry out this research. Results show that these companies are very much in favor of the internationalization process, and that this center may now be characterized as an exporter. Inter-organizational cooperation was cited by SEBRAE-SP as extremely important not only for survival of companies monitored, but also for their entry into international markets and increased exportsUna tendencia, tanto en el ámbito nacional como en el internacional, ha sido evidente en investigaciones académicas, como también en los medios empresariales y gubernamentales: la de empresas, especialmente micro, pequeñas y medianas, que buscan organizarse en redes estratégicas de cooperación ínter organizacionales, para mantenerse competitivas en los mercados donde actúan o, precisamente, para asegurar su sobrevivencia delante de la instigada competición proveniente del proceso denominado globalización de mercados. El objetivo general del presente estudio es investigar las interconexiones del proceso de internacionalización que les permite a las micro y pequeñas empresas cooperar en clusters industriales o arreglos productivos locales, en contrapunto a la inserción individual de las empresas en los mercados internacionales. Se utilizó el método de estudio de caso para la realización de la presente investigación. Como

  20. Otimização no planejamento agregado de produção em indústrias de processamento de suco concentrado congelado de laranja Optimization in the aggregate production planning in frozen concentrated orange juice processing industry

    Directory of Open Access Journals (Sweden)

    José Renato Munhoz

    2010-01-01

    Full Text Available Neste trabalho apresentam-se modelos de programação linear e programação por metas para apoiar decisões no processo de planejamento agregado da produção de suco concentrado congelado de laranja, com múltiplos produtos, estágios e períodos. Além das decisões de produção, mistura e estocagem de sucos, os modelos também incorporam o planejamento de colheita da laranja, levando-se em consideração suas curvas de maturação. Desta maneira, os modelos consideram grande parte da cadeia de suprimento envolvida no setor de produção de suco concentrado congelado de laranja. Outro ponto a destacar é a consideração do processo de mistura de diferentes tipos de sucos para a obtenção da especificação de ratio do produto acabado, utilizando a acidez da laranja como base de cálculo para a especificação de ratio. Para resolver os modelos de programação linear e programação por metas, utilizou-se uma linguagem de modelagem algébrica e um aplicativo de última geração de solução de problemas de programação matemática. Um estudo de caso foi realizado em uma empresa de suco de laranja localizada no Estado de São Paulo, envolvendo várias plantas e com uma rede de distribuição internacional com características típicas de outras empresas do setor. Os resultados indicam que a abordagem aqui proposta pode ser aplicada em situações reais.This work presents models using linear programming and goal programming to support decision making in the frozen concentrated orange juice planning process with multiple products, stages, and periods. Besides decisions about the production, blending, and juice storage, the models also include orange harvesting plan, which takes into account oranges maturation curves. Thus, the models take into consideration a large portion of the supply chain involved in the frozen concentrated orange juice sector. Another point to highlight is the inclusion of the blending process of different types of

  1. O Uso da Informação de Custos nos Acertos das Decisões de Negócio: um estudo de caso em uma empresa industrial de plásticos flexíveis.

    Directory of Open Access Journals (Sweden)

    Paulo Roberto da Nóbrega Cavalcante

    2011-12-01

    Full Text Available As mudanças ocorridas no ambiente dos negócios nas últimas décadas vêm influenciando o uso de novos métodos de custeio capazes de dar suporte à tomada de decisões de negócio. No Brasil o uso de práticas de contabilidade gerencial é recente, e por isso, alguns métodos de custos não são utilizados com muita freqüência. O objetivo deste trabalho consistiu em verificar quais as vantagens do uso do método de custeio ABC para os acertos das decisões de negócio. Este estudo foi orientado pelo paradigma fenomenológico e a metodologia utilizada foi à descritiva e exploratória. A elaboração da estratégia de pesquisa foi o estudo de caso; a tática principal para aumentar a confiabilidade da pesquisa e orientar o pesquisador durante o seu desenvolvimento foi à coleta e evidência dos dados através da análise dos documentos, observação, entrevista e pesquisa-ação. Após realizar uma revisão na literatura sobre os principais aspectos da contabilidade gerencial para eficiência interna das empresas e evidenciar os métodos de custeio utilizados atualmente, descreve-se o estudo efetuado. O resultado obtido através de uma escala de atitudes Likert para medir a percepção do gestor sobre a utilização do ABC foi favorável para os acertos das decisões de negócio mesmo com as limitações atribuídas ao método ABC como a existência de baixa relevância dos custos indiretos em relação aos custos totais.

  2. Development of 101 Gene-based Single Nucleotide Polymorphism Markers in Sea Cucumber, <em>Apostichopus japonicusem>>

    Directory of Open Access Journals (Sweden)

    Wei Lu

    2012-06-01

    Full Text Available Single nucleotide polymorphisms (SNPs are currently the marker of choice in a variety of genetic studies. Using the high resolution melting (HRM genotyping approach, 101 gene-based SNP markers were developed for <em>Apostichopus japonicusem>, a sea cucumber species with economic significance for the aquaculture industry in East Asian countries. HRM analysis revealed that all the loci showed polymorphisms when evaluated using 40 <em>A. japonicusem> individuals collected from a natural population. The minor allele frequency ranged from 0.035 to 0.489. The observed and expected heterozygosities ranged from 0.050 to 0.833 and 0.073 to 0.907, respectively. Thirteen loci were found to depart significantly from Hardy–Weinberg equilibrium (HWE after Bonferroni corrections. Significant linkage disequilibrium (LD was detected in one pair of markers. These SNP markers are expected to be useful for future quantitative trait loci (QTL analysis, and to facilitate marker-assisted selection (MAS in <em>A. japonicusem>.

  3. EM International. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    It is the intent of EM International to describe the Office of Environmental Restoration and Waste Management`s (EM`s) various roles and responsibilities within the international community. Cooperative agreements and programs, descriptions of projects and technologies, and synopses of visits to international sites are all highlighted in this semiannual journal. Focus on EM programs in this issue is on international collaboration in vitrification projects. Technology highlights covers: in situ sealing for contaminated sites; and remote sensors for toxic pollutants. Section on profiles of countries includes: Arctic contamination by the former Soviet Union, and EM activities with Germany--cooperative arrangements.

  4. Comportamento de íons de metais pesados (Pb e Ni) e de compostos nitrogenados em área industrial impactada no Município de Cubatão-SP

    OpenAIRE

    Robercal Asevedo Berrocal

    2009-01-01

    A área de estudo deste trabalho, localizada no Município de Cubatão, abrange um terreno industrial desativado onde no passado foram descartados resíduos, bem como, manipulados e estocados materiais com elevados teores de substâncias orgânicas e iônicas. Por esse motivo constitui-se num sistema bastante complexo para disponibilidade iônica ao meio ambiente. Foram definidas quatro Áreas (A, B, C e D) para amostragens de solo e água subterrânea e efetuadas análises texturais , mineralógicas e qu...

  5. Assessment of environmental impact models in natural occurring radionuclides solid wastes disposal from the mineral industry; Avaliacao de modelos de impacto ambiental para deposicao de residuos solidos com radionuclideos naturais em instalacoes minero-industriais

    Energy Technology Data Exchange (ETDEWEB)

    Pontedeiro, Elizabeth May Braga Dulley

    2006-07-15

    This work evaluates the behavior of wastes with naturally occurring radionuclides as generated by the mineral industry and their final disposal in landfills. An integrated methodology is used to predict the performance of an industrial landfill for disposal of wastes containing NORM/TENORM, and to define acceptable amounts that can be disposed at the landfill using long-term environmental assessment. The governing equations for radionuclide transport are solved analytically using the generalized integral transform technique. Results obtained for each compartment of the biogeosphere are validated with experimental results or compared to other classes of solutions. An impact analysis is performed in order to define the potential consequences of a landfill to the environment, considering not only the engineering characteristics of the waste deposit but also the exposure pathways and plausible scenarios in which the contaminants could migrate and reach the environment and the human population. The present work permits the development of a safety approach that can be used to derive quantitative waste acceptance criteria for the disposal of NORM/TENORM waste in landfills. (author)

  6. Industrial gases

    International Nuclear Information System (INIS)

    Hunter, D.; Jackson, D.; Coeyman, M.

    1993-01-01

    Industrial gas companies have fought hard to boost sales and hold margins in the tough economic climate, and investments are well down from their 1989-'91 peak. But 'our industry is still very strong long term' says Alain Joly, CEO of industry leader L'Air Liquide (AL). By 1994, if a European and Japanese recovery follows through on one in the U.S., 'we could see major [investment] commitments starting again,' he says. 'Noncryogenic production technology is lowering the cost of gas-making possible new applications, oxygen is getting plenty of attention in the environmental area, and hydrogen also fits into the environmental thrust,' says Bob Lovett, executive v.p./gases and equipment with Air Products ampersand Chemicals (AP). Through the 1990's, 'Industrial gases could grow even faster than in the past decade,' he says. Virtually a new generation of new gases applications should become reality by the mid-1990s, says John Campbell, of industry consultants J.R. Campbell ampersand Associates (Lexington, MA). Big new oxygen volumes will be required for powder coal injection in blast furnaces-boosting a steel mill's requirement as much as 40% and coal gasification/combined cycle (CGCC). Increased oil refinery hydroprocessing needs promise hydrogen requirements

  7. Microsatellite Loci in the Gypsophyte <em>Lepidium subulatum em>(Brassicaceae, and Transferability to Other <em>Lepidieae>

    Directory of Open Access Journals (Sweden)

    José Gabriel Segarra-Moragues

    2012-09-01

    Full Text Available Polymorphic microsatellite markers were developed for the Ibero-North African, strict gypsophyte <em>Lepidium subulatumem> to unravel the effects of habitat fragmentation in levels of genetic diversity, genetic structure and gene flow among its populations. Using 454 pyrosequencing 12 microsatellite loci including di- and tri-nucleotide repeats were characterized in <em>L. subulatumem>. They amplified a total of 80 alleles (2–12 alleles per locus in a sample of 35 individuals of <em>L. subulatumem>, showing relatively high levels of genetic diversity, <em>H>O = 0.645, <em>H>E = 0.627. Cross-species transferability of all 12 loci was successful for the Iberian endemics <em>Lepidium cardaminesem>, <em>Lepidium stylatumem>, and the widespread, <em>Lepidium graminifoliumem> and one species each of two related genera, <em>Cardaria drabaem> and <em>Coronopus didymusem>. These microsatellite primers will be useful to investigate genetic diversity, population structure and to address conservation genetics in species of <em>Lepidium>.

  8. <em>Aspergillus luchuensisem>, an industrially important black <em>Aspergillus> in East Asia

    DEFF Research Database (Denmark)

    Hong, Seung-Beom; Lee, Mina; Kim, Dae-Ho

    2013-01-01

    of A. awamori which are stored in National Research Institute of Brewing in Japan, represent A. niger (n = 14) and A. luchuensis (n = 6). The neotype of A. awamori (CBS 557.65 = NRRL 4948) does not originate from awamori fermentation and it is shown to be identical with the unknown taxon Aspergillus...

  9. Aplicação da manufatura enxuta em uma indústria de equipamentos agrícolas Application of lean manufacturing in an industry of agricultural equipments

    Directory of Open Access Journals (Sweden)

    Ana Paula Barth Bartz

    2013-04-01

    Full Text Available Com a crescente concorrência e a necessidade de maior competitividade, as empresas que adotam o sistema de produção enxuta levam vantagem sobre as demais, pois tratam melhor as informações aumentando a sua eficiência. O objetivo desta pesquisa foi diminuir o lead-time da organização estudada, através da aplicação prática do Just-in-time em busca de uma produção enxuta em uma empresa metal-mecânica, fabricante de implementos agrícolas. Para atender a este objetivo realizou-se um estudo de caso de natureza qualitativa e de ordem descritiva. Para a coleta de dados utilizou-se inicialmente a observação e a análise documental para entender o processo produtivo. Após trabalhou-se com levantamentos de dados através de entrevistas estruturadas para identificar as dificuldades enfrentadas pelos fornecedores na entrega dos insumos dentro das especificações acordadas. A empresa estudada apresentava alto índice de atraso na entrega de seus produtos, devido ao elevado lead-time. Através da elaboração do mapeamento de fluxo atual, identificou-se que a organização trabalhava com uma produção empurrada e que muito dos atrasos ocorriam por problemas no fornecimento de insumos. Buscou-se a eliminação de tarefas que não agregavam valor ao produto final, elaborou-se um fluxo de valor enxuto para o processo, identificaram-se os principais problemas que levavam os fornecedores a entregarem os insumos fora das especificações ou dos prazos e sugeriram-se ações que poderiam ser aplicadas para eliminação destes atrasos. Através destas ações observou-se a redução no lead-time, auxiliando no melhor atendimento dos prazos de entrega, no aumento da competitividade, fato relevante para manter-se no mercado atual de equipamentos agrícolas.With increasing competition and the need for improved competitiveness, companies who adopt the lean production system have some advantages, because they deal better with the information

  10. Melhoria contínua e aprendizagem organizacional: múltiplos casos em empresas do setor automobilístico Continuous improvement and organizational learning: multiple cases in automotive industry companies

    Directory of Open Access Journals (Sweden)

    Rodrigo Valio Dominguez Gonzalez

    2011-01-01

    Full Text Available A acirrada competição, ressaltada pela disputa globalizada, exige que as organizações estabeleçam inovações cada vez mais frequentes e rápidas a fim de atender às mudanças tecnológicas, econômicas e políticas que a sociedade atravessa. Neste contexto, a melhoria contínua dos produtos e processos produtivos é necessária para manter a empresa competitiva, entretanto, muitas destas iniciativas fracassam dentro das organizações. Com o objetivo de analisar como os mecanismos de aprendizagem sustentam as atividades de melhoria, é realizada uma pesquisa de campo, baseada no estudo de caso em três empresas do setor automobilístico. O artigo conclui que, além de implantar programas e ferramentas para resolução de problemas, as organizações precisam desenvolver ambientes que estimulem a aprendizagem e a cooperação entre seus indivíduos, trabalhando no desenvolvimento dos recursos humanos para que as iniciativas de melhoria sejam, de fato, contínuas.Fierce competition, highlighted by global competition has increasingly required organizations to adopt frequent and quick innovations to meet the current technological, economic, and political changes in society. Accordingly , the continuous improvement of products and production processes is necessary to keep the company competitive. However, many of these initiatives fail in organizations. In order to analyze how the mechanisms of learning support improvement activities, a field research based on case study of three companies in the automotive sector was carried out. The article concludes that in addition to programs and tools for solving problems, organizations need to develop environments that encourage learning and cooperation among its individuals working in human resources development to achieve continuous improvement.

  11. Estudo da relação de confiança em programa de fomento florestal de indústria de celulose na visão dos produtores rurais Study of trust relationships in private woodlot production for a cellulose industry from the point of view of rural producers

    Directory of Open Access Journals (Sweden)

    Fabiano Luiz da Silva

    2009-08-01

    Full Text Available Este estudo analisou os fatores que contribuem para a relação de confiança no Programa de Fomento Florestal de indústria de celulose e produtores rurais fomentados em Minas Gerais. Foram aplicados 141 questionários a produtores rurais fomentados, em 32 municípios de sete microrregiões mineiras. A amostragem foi aleatória estratificada, sendo os critérios: a Produtor Fomentado com Contrato Finalizado (PFCF composto por produtores que possuíam pelo menos um contrato encerrado com a indústria de celulose; e b Produtor Fomentado com Contrato em Andamento (PFCA composto por produtores que não haviam finalizado nenhum contrato de fomento com a indústria de celulose. Os produtores fomentados realizam contrato de fomento florestal para apenas a primeira rotação. Assim, legalmente possuem a obrigatoriedade de entrega de 97% da madeira do primeiro ciclo da floresta. Entretanto, referente ao segundo ciclo não contratado da floresta, 18% dos produtores fomentados disseram ter interesse na comercialização dessa madeira com a empresa, indiferente de variações em preços de produtos concorrentes, como o carvão vegetal. Acredita-se que, não havendo oscilações significativas nesses mercados concorrentes, 50% dos fomentados devem comercializar o segundo corte com a empresa fomentadora. Atualmente, em 98,4% dos contratos realizados com produtores rurais fomentados há cumprimento de ambas as partes nos acordos firmados. A confiança e confiabilidade no relacionamento entre indústria de celulose e fomentados foram confirmadas, mas existem alguns fatores que contribuem para a possível desconfiança no fomento florestal, como: o sistema de medida da madeira, o custo de transporte e a ausência de política de preços que favorecem o entendimento dos produtores fomentados.This study analyzed factors that contribute to relations of trust within a private woodlot producer program managed by a cellulose industry in Minas Gerais state. One

  12. Energy industry

    Science.gov (United States)

    Staszak, Katarzyna; Wieszczycka, Karolina

    2018-04-01

    The potential sources of metals from energy industries are discussed. The discussion is organized based on two main metal-contains wastes from power plants: ashes, slags from combustion process and spent catalysts from selective catalytic NOx reduction process with ammonia, known as SCR. The compositions, methods of metals recovery, based mainly on leaching process, and their further application are presented. Solid coal combustion wastes are sources of various compounds such as silica, alumina, iron oxide, and calcium. In the case of the spent SCR catalysts mainly two metals are considered: vanadium and tungsten - basic components of industrial ones.

  13. Industrial sector

    International Nuclear Information System (INIS)

    Ainul Hayati Daud; Hazmimi Kasim

    2010-01-01

    The industrial sector is categorized as related to among others, the provision of technical and engineering services, supply of products, testing and troubleshooting of parts, systems and industrial plants, quality control and assurance as well as manufacturing and processing. A total of 161 entities comprising 47 public agencies and 114 private companies were selected for the study in this sector. The majority of the public agencies, 87 %, operate in Peninsular Malaysia. The remainders were located in Sabah and Sarawak. The findings of the study on both public agencies and private companies are presented in subsequent sections of this chapter. (author)

  14. Chemical Composition of Essential Oils of <em>Litsea cubebaem> Harvested from Its Distribution Areas in China

    Directory of Open Access Journals (Sweden)

    Qinqin Cui

    2012-06-01

    Full Text Available <em>Litsea cubebaem> (Lour. Pers. is a promising industrial crop with fruits rich in essential oils. The chemical composition of essential oils of <em>L. cubebaem> (EOLC were determined for fruits harvested from eight regions in China. The overall essential oil content, obtained by hydrodistillation and analyzed by gas chromatography–mass spectrometry (GC-MS, ranged from 3.04% to 4.56%. In total, 59 compounds were identified, the dominant components being monoterpenes (94.4–98.4%, represented mainly by neral and geranial (78.7–87.4%. D-Limonene was unexpectedly a lesser constituent (0.7–5.3% in fruits, which differed from previous reports (6.0–14.6%. Several components were only detected in certain regions and compounds such as <em>o>-cymene and eremophilene have never before been reported in EOLC. These results demonstrate significant regional variation in the chemical composition of EOLC. This investigation provides important information with regard to the bioactivity, breeding work and industrial applications of <em>L. cubebaem>.

  15. Caracterização dos argilominerais usados em matéria-prima cerâmica, da formação Rio do Rasto, Bacia do Paraná, no município de Turvo, SC Characterization of clay minerals used in the ceramic industry, from Rio do Rasto formation, Paraná basin, exploitation in Turvo, SC, Brazil

    Directory of Open Access Journals (Sweden)

    J. A. Costa

    2010-12-01

    Full Text Available No sudeste de Santa Catarina existem inúmeras minas de exploração de argilas destinadas à indústria cerâmica da região. Para o conhecimento desta matéria prima foi realizada a caracterização em detalhe de uma frente de lavra em atividade. A exploração é realizada em terrenos sedimentares da Formação Rio do Rasto (Permiano Superior na Bacia do Paraná que afloram como morros testemunho. Foram coletadas quatorze amostras representativas dos níveis desta mina composta de argilitos com intercalação de siltitos de pequena espessura. As amostras foram analisadas por difratometria de raios X pelo método do pó na rocha total e na fração In the southeastern part of Santa Catarina state, Brazil, many mines of clays used as raw material for the ceramic industry are found. A detail study of this material was developed in a mine in activity. The exploitation of clays is held in sedimentary rocks of Rio do Rasto Formation (Upper Permian in the Paraná Basin. The outcrops are in hills testimonies. Fourteen samples were collected and represent the levels of this mine which consisted of argillites with intercalation of slim siltite layer. These samples were analyzed by X-ray diffraction using the powder method and in the fraction < 4 µm. The chemical composition was determined by X-ray fluorescence spectrometer. Petrographic observations in thin section were also performed. Scanning electron microscope images was obtained in samples fragments by secondary electron method. Electron microprobe microanalysis was performed in one thin section. The results showed large vertical variation in the mineralogy and it has been identified three different levels. Up to 2.00 m there is a predominance of smectite. Between 5.50 m 2.00 m the smectite is the main clay mineral, but with significant amounts of illite/mica and above 5.50 m occurs large increase in K-feldspar and detrital mica. Studies in detail by X-ray diffraction (determination of the b

  16. Análise do processo de preparação da produção no desenvolvimento de novos produtos por meio de um estudo de caso em uma empresa do setor siderúrgico Production preparation process analysis in new products development - a case study in the steel industry

    Directory of Open Access Journals (Sweden)

    Angelo Varandas Junior

    2012-04-01

    Full Text Available A demanda por novos produtos tem aumentado em algumas empresas do setor siderúrgico, indicando uma crescente preocupação com o desempenho do processo de desenvolvimento de produtos (PDP, que depende de vários elementos conceituais importantes apontados na literatura. Em uma empresa siderúrgica, um fator relevante é o projeto do processo de produção, devido à característica de ser um processo de fabricação contínuo e por, geralmente, envolver investimentos significativos na fase de preparação da produção. Nesse contexto, o presente trabalho busca realizar uma análise desta fase em uma empresa siderúrgica. Pretende-se, por meio da abordagem metodológica de estudo de caso, identificar práticas organizacionais, focando nos aspectos operacionais e suas interfaces, envolvendo as áreas funcionais de marketing, engenharia do produto e manufatura. Também é tratada no trabalho a integração dos times multidisciplinares, a tomada de decisão e os critérios para avaliação dos resultados do PDP. O trabalho conclui que a empresa analisada utiliza-se de práticas que estruturam a preparação da produção e que a integração interfuncional das áreas é o que se destaca para o sucesso do PDP.The demand for new products has increased in some companies from the steel industry, indicating a growing concern with the performance of products development process (PDP, which depends on several important conceptual elements found in the literature. The production process project is a relevant factor in a steel company, because it is a continuous manufacturing process and it generally involves significant investments in the production preparation phase. In this context, the present paper analyzes this stage of the process in a steel producer. The research aims to identify, through a case study methodological approach, the company's organizational practices with focus on the operational aspects and their interfaces involving the functional

  17. Trabalho e morbidade comum em indústria de celulose e papel: um perfil segundo setor Work and common disease in a pulp and paper industry: a profile by department

    Directory of Open Access Journals (Sweden)

    Anaclaudia Gastal Fassa

    1996-09-01

    Full Text Available Este artigo objetiva identificar as associações das morbidades comuns e dos acidentes de trabalho com setor, descrevendo as cargas de trabalho e realizando um amplo controle de fatores de confusão. Através de delineamento transversal, estudou-se a totalidade dos trabalhadores de uma indústria de celulose e papel (n=671. Realizaram-se entrevistas nesta indústria, caracterizando a percepção dos trabalhadores sobre as exposições ocupacionais e a morbidade. A área industrial caracterizou-se pelo excesso de problemas auditivos (RO>2,5, respiratórios (RO>2,7 e acidentes (RO>4,7, possivelmente relacionados com ruído, poeira, mudanças bruscas de temperatura e exposições a substâncias químicas, além do trabalho físico pesado e exposições a situações de risco. A administração apresentou um aumento de problemas nos olhos, dor nas costas, irritação e nervosismo (RO>1,7, que parecem ter relação com a falta de autonomia e criatividade no trabalho, problemas ergonômicos e esforço visual. Confirmaram-se não só as altas prevalências de morbidades comuns, mas também sua relação com as particularidades do processo de trabalho sintetizadas pela categoria setor.The purpose of this study was to identify associations between common morbidity and work accidents and the respective departments in a pulp and paper industry, describing work loads and performing broad control of potential confounding factors. We studied all the workers from a specific pulp and paper industry, using a cross-sectional design and interviews at the workplace (n=671 with a standardized questionnaire. We characterized workers' perceptions of their occupational exposures and health problems. The industrial area had an excess in auditory problems (OR>2.5 and respiratory problems (OR>2.7 as well as accidents (OR>4.7. These diseases were probably related to the high prevalence of noise, dust, sudden temperature changes, exposure to various chemicals, and

  18. Working capital in mergers and acquisitions in the oil industry: issues and impacts over the company valuation; Capital de giro em aquisicoes de empresas na industria do petroleo: consideracoes e impactos sobre o valor do negocio

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Fabio Maia; Junior, Ewerton R.W.P. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Mendes, Andre P. A. [Banco Nacional de Desenvolvimento Economico e Social (BNDES), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The necessary working capital required to maintain a sustainable company operation could be relevant in the oil industry, specially in high prices times. Their proper consideration in companies valuation contribute for economic model accuracy, providing reliable information to the investment decision. This article has the objective of discussing the general concept of working capital, taking into account peculiar characteristics concerning their applicability in economic analysis of mergers and acquisition. Aspects related to the forecast cash flow, perpetuity, besides issues concerning its financing are discussed. Further, it is also spotted the necessary concerns during the elaboration of prices proposals, regulatory and management factors influence, over its adequate dimensioning, and also the methodological simplifications usually used in forecasting. Lastly, the work aim to emphasize the importance of the working capital changes in all economic evaluation developed by the discounted cash flow methodology, in order to guarantee methodological consistency in the company valuation. (author)

  19. Utilization of ALANPOL dosemeter composed by alanine and polyethylene for determination of doses in industrial effluents; Utilizacao do dosimetro ALANPOL composto por alanina e polietileno para determinacao de doses em efluentes industriais

    Energy Technology Data Exchange (ETDEWEB)

    Rela, Carolina S.; Sampa, Maria Helena de O.; Napolitano, Celia M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)]. E-mail: csrela@ipen.br; Pontuschka, Walter M. [Sao Paulo Univ., SP (Brazil). Inst. de Fisica

    2005-07-01

    A study of traceability and accuracy was performed with the dosimetry system ALANPOL developed by IVHTJ/ Poland that uses alanine as a dosimeter and EPR as the read out system. The dosimeter ALANPOL is a polymer compound that aggregates alanine. The dosimeter has the outside diameter 3 mm, and the length of 25,4 mm (1 inch). In order to use this dosimeter for monitoring the existing real time calorimetry dosimeter system set up in a electron beam waste treatment plant. Electron beam and gamma irradiation experiments with ALANPOL was carried out under demineralized water and industrial effluent. The result show that in the dose range of 1-40 kGy the ALANPOL dosimeter system is suitable underwater monitoring for absorbed dose and can be applied for the evaluation of the on line calorimetry dosimeter system. (author)

  20. Industrial democracy in South Africa's transition

    African Journals Online (AJOL)

    In comparison with traditional work practices, thus, increased flexibility in production .... the quality of working life but also the product, and productivity, of labour. The ways in which ... of change. There are other advantages also; for example, drawing on em- ...... INDUSTRIAL DEMOCRACY: A BALANCE SHEET. The most ...

  1. Fermentation Industry.

    Science.gov (United States)

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  2. Industrial radiography

    International Nuclear Information System (INIS)

    Aloni, A.; Magal, O.

    1992-02-01

    This publication is meant to be a manual for industrial radiography. As such the manual concentrates on the practical aspects, presenting existing radiographic system and techniques of operation to satisfy specified quality requirements. The manual also reviews the safety aspect of performing radiographic work. (author) systems

  3. Education Industry

    Science.gov (United States)

    2007-01-01

    themes: No Child Left Behind Act reauthorization, international competitiveness, and recruiting and retention of quality teachers. The US education ...industry stakeholders and require difficult choices. A more centralized education system has many advantages , and the US should move in that direction...between math and science skills, innovation and creativity, and international education , as all these areas are integral to future success. Finally

  4. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2013-01-01

    Garnet has been used as a gemstone since the Bronze Age. However, garnet’s angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

  5. Diagnóstico da gestão da manutenção em indústrias de médio e grande porte da região metropolitana de Recife Diagnosis of maintenance management in medium and large industries in the metropolitan area of Recife

    Directory of Open Access Journals (Sweden)

    Ana Carla Bittencourt Reis

    2012-01-01

    Full Text Available Este artigo apresenta os resultados de uma investigação acerca das práticas de gerenciamento da manutenção nas indústrias de manufatura de médio e grande porte da Região Metropolitana de Recife, nos diversos ramos de atividade. A pesquisa foi realizada por meio da aplicação in loco de um questionário que aborda questões importantes do contexto da manutenção. As 50 indústrias entrevistadas foram selecionadas por meio de uma amostragem probabilística cuja estrutura foi extraída do cadastro da Federação das Indústrias do Estado de Pernambuco (anos de 2005 e 2006. As entrevistas foram conduzidas durante o segundo e terceiro trimestres de 2007 e, dentre os resultados encontrados, pode-se afirmar que a manutenção mostrou algumas deficiências que podem ser amenizadas e até mesmo superadas por meio de uma maior atenção a esse setor. Além disso, pode-se destacar que grande parte das indústrias utiliza a experiência gerencial como ferramenta de análise em detrimento de técnicas analíticas mais eficientes para a solução de problemas. Esse comportamento limita os resultados positivos que podem ser obtidos a partir de um tratamento adequado da manutenção.This article presents the results of a research study on maintenance management practices in medium and large manufacturing industries in the metropolitan area of Recife, in various branches of activity. The survey was carried out by means of in loco application of questionnaires addressing important issues dealing with the context of maintenance. The 50 industries surveyed were selected by probability sampling, where sampling framework was drawn from the records of the Federation of Industries of the State of Pernambuco, in 2005 and 2006. The interviews were conducted during the second and third quarters of 2007. Among the results, it is possible to state that maintenance has presented some shortcomings, which can be mitigated or even overcome through greater attention to

  6. Marketing em moda

    OpenAIRE

    Leães, Sabrina Durgante

    2008-01-01

    Dissertação de mestrado em Design e Marketing O actual estado do Marketing em Moda é uma das questões ainda complexa com que se debate a sociedade global. As questões do Marketing em Moda percorrem alguns aspectos fundamentais tais como as constantes mutações do meio envolvente, a forma de como é percebida e comunicada a identidade das marcas de moda, em busca da melhor forma de segmentar o mercado e definir o seu posicionamento, bem como a reacção ao produto de moda do consumidor final. ...

  7. Labor law and petroleum industry: the employee in Law number 5.811/72; Direito do trabalho e industria do petroleo: o empregado em face da lei n. 5.811/72

    Energy Technology Data Exchange (ETDEWEB)

    Galvao, Katia C.P.; Yvi, Maytta A.S.; Mendonca, Fabiano A.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Faculdade de Direito

    2004-07-01

    The Law n. 5.811, of October 11th, 1972, created a special labor code for the employees of petroleum industry. It brought a new work regime for those employees, based on work by rotation. However, after the promulgation of the Brazilian's Federal Constitution of 1988, the constitutionality of the Law has been put in proof. The present text approaches the main controversies of the theme, giving a systematic interpretation to the Law, through the observation of interpretative rules and principles of Brazilian's juridical system. It concludes that the Law is constitutional when stipulates eight hour work by rotation, and considers that the payment of suppressed rest hours, the Sunday work, the night work and the hours 'in itinere' must be interpreted such as wrote on the Law. This way of interpretation is clearly in consonance with the Brazilian's juridical system and with the main purpose of any labor Law, which is the protection of the employees and establishment of healthy work conditions. (author)

  8. COD biological removal and biogas production in anaerobic reactor treating cassava wastewater industry; Remocao biologica de DQO e producao de biogas em reator anaerobio tratando efluente de fecularia de madioca

    Energy Technology Data Exchange (ETDEWEB)

    Watthier, Elisangela [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil). Curso de Mestrado em Engenharia Agricola; Andreani, Cristiane Lurdes [Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq), Brasilia, DF (Brazil); Gomes, Simone Damasceno [Universidade Estadual do Oeste do Parana (PGEAGRI/UNIOESTE), Cascavel, PR (Brazil). Programa de Pos-Graduacao em Engenharia Agricola; Moreschi, Roberson; Rufino, Mauricio de Oliveira [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil). Curso de Engenharia Agricola

    2010-07-01

    The effluent from the cassava industry cause damage to the environment if released without treatment. One alternative is the implementation of anaerobic reactors, which also add value through the production of biogas. The support means increases the contact surface of micro-organisms and enhance their setting. The purpose of this study was to evaluate the reduction of organic matter (DQO) and biogas production in a reactor of PVC with 90 cm long and 15 cm in diameter, through support rings of bamboo, 10 cm in length and diameter ranged from 1.7 to 2.5 cm, with a volume of 6 L. The organic loading used were 4,357, 4,708, 5,601 and 6,126 g DQO.L-1.day-1, corresponding to hydraulic retention time (TRH) of 3,5, 2,8, 3,25 and 2,7 days, respectively. It was observed that with the increase of organic load was increased production of biogas, the largest observed for a load of 6.126 g DQO.L-1.day-1 with an average of 9.146 L.day-1. Regarding the removal of organic matter were achieved values of 98.35, 99.09, 99.33 and 98.55% respectively for each load applied, with the highest efficiency observed in charge of 5.601 g COD. L-1. day-1, but without significant differences. (author)

  9. Environmental Management Systems (EMS Adoption in Sarawak (Malaysia: Implementation Motivations

    Directory of Open Access Journals (Sweden)

    Lee Lee Ho

    2017-09-01

    Full Text Available Environmental management has been in the process of evolution since Industrial Revolutions of 18th and 19th centuries. And the more recent is the development of international environmental management standards and guidelines to facilitate global trade. These environmental management standards and guidelines are usually known as Environmental Management Systems (EMS. This research investigates the implementation motivations in relation to EMS adoption in Sarawak, Malaysia organizations. Empirical findings of a survey on the above in Sarawak organizations are presented. About 112 survey questionnaires invitations were forwarded to various organizations in Sarawak and a total of 47 responses were received. The results of this research show that among the Sarawak organizations, the top three implementation motivations or benefits from implementing EMS according to their importance by the Sarawak EMS user’s organizations are 1 Legal compliance as the top benefit of EMS implementation; 2 Improvement in operational environmental protection; and 3 Corporate image advantages.

  10. Rubber industry

    Science.gov (United States)

    Staszak, Maciej

    2018-03-01

    Following chapter presents short introductory description of rubber and rubber industry. The main problem of rubber industry is the way of the usage of spent tires. Furthermore very important group of problems arise considering the metal and nonmetal additives which are significant component of the vulcanized rubber. The key attention is dedicated to typical ways of rubber usage in utilization and recovery of metals from spent rubber materials concentrating specifically on used tires processing. The method of recovery of rare metals from rubber tires was described. The rubber debris finds widest use in the field of waste metal solutions processing. The environmental pollution caused by metals poses serious threat to humans. Several applications of the use of waste rubber debris to remove metals from environmental waters were described. Moreover, the agriculture usage of waste tire rubber debris is described, presenting systems where the rubber material can be useful as a soil replacement.

  11. Industry Matters

    DEFF Research Database (Denmark)

    Tran, Angie Ngoc; Jeppesen, Søren

    2018-01-01

    This chapter draws on a study investigating what corporate social responsibility (CSR) means to Vietnam’s small- and medium-size enterprise (SME) owner/managers and workers, using Scott’s three-pillar (norms, regulation, cognition) institutional framework. The findings are based on factory visits...... and interviews with 40 managers/owners and 218 workers conducted in two sectors—textile/garment/footwear (TGF) and food/beverage processing (FBP)—around Ho Chi Minh City in 2011. Scott’s framework is useful in highlighting similarities and differences between these two sectors. We found more stringent state...... regulation and greater industry pressure with regard to quality and safety of products than to labour standards in both sectors. Most factories in the TGF sector assembled products for global supply chains and were under pressure by industry norms, while most companies in the FBP sector produced...

  12. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2018-01-01

    This article has a twofold ambition. It offers a history of landscaping at Søby brown coal beds—a former mining site in western Denmark—and a methodological discussion of how to write such a study. Exploring this specific industrial landscape through a series of projects that have made different...... natural resources appear, we show that even what is recognized as resources shifts over time according to radically different and unpredictable agendas. This indicates that the Søby landscape is fundamentally volatile, as its resourcefulness has been seen interchangeably to shift between the brown coal...... business, inexpensive estates for practically savvy people, pasture for grazing, and recreational forest, among other things. We discuss these rifts in landscape history, motivated by what we refer to as industriousness, to show that, at sites such as Søby, both natural resources and historical...

  13. Industrial vision

    DEFF Research Database (Denmark)

    Knudsen, Ole

    1998-01-01

    This dissertation is concerned with the introduction of vision-based application s in the ship building industry. The industrial research project is divided into a natural seq uence of developments, from basic theoretical projective image generation via CAD and subpixel analysis to a description...... is present ed, and the variability of the parameters is examined and described. The concept of using CAD together with vision information is based on the fact that all items processed at OSS have an associated complete 3D CAD model that is accessible at all production states. This concept gives numerous...... possibilities for using vision in applications which otherwise would be very difficult to automate. The requirement for low tolerances in production is, despite the huge dimensions of the items involved, extreme. This fact makes great demands on the ability to do robust sub pixel estimation. A new method based...

  14. Avaliação do custo do tratamento de úlceras por pressão em pacientes hospitalizados usando curativos industrializados Evaluation of the cost of treating pressure ulcers in hospitalized patients using industrialized dressings

    Directory of Open Access Journals (Sweden)

    Angela Cristina Beck Lima

    2011-01-01

    Full Text Available Este trabalho avaliou o uso de curativos industrializados: poliuretano, hidrogel, carvão ativo e também hidrogel com alginato, no tratamento de úlcera por pressão na Clínica Neurocirúrgica do Hospital da Restauração. O objetivo foi identificar o fator crítico que aumenta a demanda e custos com curativos industrializados. A avaliação, realizada na Clínica Neurocirúrgica, identificou os indivíduos que apresentaram risco de desenvolver úlcera por pressão. 62 pacientes foram avaliados e a prevalência foi de 22,6%, segundo escore obtido na escala de Braden. A avaliação comparativa entre indivíduos que receberam medidas preventivas e entre os que não receberam mostrou que o custo médio diário de hospitalização para o primeiro grupo foi 45% maior que para o segundo grupo. O teste de Wilcoxon-Mann-Withiney comparou a população de risco com a população de baixo risco, mostrando que a análise dos escores da Escala de Braden entre os grupos apresenta diferenças estatisticamente significativas quando estas duas populações são comparadas, intervalo de confiança de 95%. Úlcera por pressão é um indicador de qualidade dos serviços de saúde. Pode-se reduzir custo e oferecer serviços públicos de maior qualidade se forem implantados treinamentos com a equipe de enfermagem, usando um protocolo de medidas preventivas baseado em um teste de avaliação de risco como a escala de Braden.This work evaluated wound dresses used in the Neurosurgery Department of Restauração Hospital: polyurethane, hydrogel and activated carbon wound dresses and hydrogel with alginate used for pressure ulcer care. This work aimed to identify a critical factor that increases demand and cost of wound dresses. The evaluation conducted at the Neurosurgery Department identified individuals at risk of pressure ulcer development. Sixty-two patients were evaluated and the prevalence of pressure ulcer was 22.6% according to the Braden scale. Comparative

  15. Aplicação do earned value em projetos complexos - um estudo de caso na EMBRAER On the use of the earned value management system approach for complex projects in the brazilian aircraft industry

    Directory of Open Access Journals (Sweden)

    Rogério Abdala Giacometti

    2007-12-01

    Full Text Available O gerenciamento do Earned Value vem obtendo aceitação crescente nas empresas e entre profissionais tais como gerentes de projetos e funcionais, devido à sua efetividade no controle dos resultados do projeto. Earned Value é definido como uma ferramenta de controle que permite avaliar simultaneamente de maneira quantitativa como se encontram os custos e prazos em uma data de controle, permitindo também prever a data de término e o valor gasto (VARGAS, 2005. Este artigo avalia a aplicabilidade do earned value como ferramenta de controle de projetos aeronáuticos na EMBRAER. Contribui também para a aplicação do earned value no controle de projetos complexos. Utilizam-se como técnicas de coleta de dados: entrevistas, observações e análise documental. Conclui-se que o earned value é utilizado apenas nos projetos da área de aviação de defesa, por ser uma exigência contratual. O uso do earned value nas áreas de programas executivos e comerciais restringe-se às fases de definição conjunta, projeto detalhado e certificação, pois o escopo do projeto é bem definido, o cronograma é detalhado e os custos são previstos e obtidos com maior acuidade. Nas demais fases de desenvolvimento do produto, o uso do earned value é restrito, devido principalmente às constantes alterações de escopo do produto e do projeto.Earned value management has been increasingly used by companies as well as by functional and project managers due to its effectiveness in controlling project results. It is defined as a control tool that enables a quantitative and simultaneous evaluation of the costs and process time within a pre-scheduled date as well as predicting the deadline and the total value spent (VARGAS, 2005.This study evaluates the earned value applicability as a tool to control aeronautical projects at EMBRAER, A Brazilian Aeronautical Company. It is also concerned with the application of earned value in the control of complex projects. The data

  16. Industry trends

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This section discusses the US energy supply and demand situation including projections for energy use, the clean coal industry (constraints of regulation on investment in new technologies, technology trends, and current pollution control efficiency), opportunities in clean coal technology (Phase 2 requirements of Title 4 of the Clean Air Act, scrubber demand for lime and limestone, and demand for low sulfur coal), and the international market of clean coal technologies

  17. Industrial melanism

    Energy Technology Data Exchange (ETDEWEB)

    Ford, E B

    1969-01-01

    Certain species of Lepidoptera have undergone a mutation in pigment color from white to black in order to be more concealing when in soot discolored environments in polluted industrial areas in England. In less polluted areas the original white variety continues to prosper. The two forms result from alleles of a color-controlling gene. The black variety is inconspicuous to insects when it settles on trees and rocks which are covered with soot.

  18. Agribusiness Industry

    Science.gov (United States)

    2007-01-01

    sheer enormity of this ultra modernized industry. Hybridized or biotech corn seeds are now nearly impervious to pesticides and herbicides. From...efficient routes of commerce of many thousands of miles - a fresh head of broccoli and lettuce lands in the chilled and computer controlled misting...cumulatively, seemingly minor and insignificant changes in food production methods (i.e. packaged precut lettuce ), society (desire for convenience foods

  19. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2007-01-01

    World production of industrial garnet was about 326 kt in 2006, with the U.S. producing about 11 percent of this total. U.S. consumption, imports, and exports were estimated at 74.3 kt, 52.3 kt, and 13.2 kt, respectively. The most important exporters are Australia, China, and India. Although demand is expected to rise over the next 5 years, prices are expected to remain low in the short term.

  20. EM International, July 1994, Volume 2

    International Nuclear Information System (INIS)

    1994-01-01

    The Office of Environmental Management (EM) at the Department of Energy (DOE) is seeking out and leveraging foreign technology, data, and resources in keeping with EM's mandate to protect public health and the environment through the safe and cost-effective remediation of the Department's nuclear weapons sites. EM works closely with foreign governments, industry, and universities to obtain innovative environmental technologies, scientific and engineering expertise, and operations experience that will support EM's objectives. Where appropriate, these international resources are used to manage the more urgent risks at our sites, secure a safe workplace, help build consensus on critical issues, and strengthen our technology development program. Through international agreements EM engages in cooperative exchange of information, technology, and individuals. Currently, we are managing agreements with a dozen countries in Europe, Latin America, and Asia. These agreements focus on environmental restoration, waste management, transportation of radioactive wastes, and decontamination and decommissioning. This publication contains the following articles: in situ remediation integrated program; in-situ characterization and inspection of tanks; multimedia environmental pollutant assessment system (MEPAS); LLNL wet oxidation -- AEA technology. Besides these articles, this publication covers: EU activities with Russia; technology transfer activities; and international organization activities

  1. Vertical Integration: Corporate Strategy in the Information Industry.

    Science.gov (United States)

    Davenport, Lizzie; Cronin, Blaise

    1986-01-01

    Profiles the corporate strategies of three sectors of the information industry and the trend toward consolidation in electronic publishing. Three companies' acquisitions are examined in detail using qualitative data from information industry columns and interpreting it on the basis of game theory. (EM)

  2. Emergency Medical Service (EMS) Stations

    Data.gov (United States)

    Kansas Data Access and Support Center — EMS Locations in Kansas The EMS stations dataset consists of any location where emergency medical services (EMS) personnel are stationed or based out of, or where...

  3. Avaliação de Desempenho dos Aspectos Tangíveis e Intangíveis da Área de Mercado: estudo de caso em uma média empresa industrialPerformance Evaluation of Tangible and Intangible Aspects of the Market Area: a case study in a medium industrial companyEvaluación del Desempeño de los Aspectos Tangibles e Intangibles del Área de Mercado: un estudio de caso en una empresa industrial mediana

    Directory of Open Access Journals (Sweden)

    BORTOLUZZI, Sandro César

    2010-12-01

    Full Text Available RESUMOA pesquisa objetiva construir um modelo de Avaliação de Desempenho (AD para a área de mercado em uma média empresa industrial, por meio da Metodologia Multicritério de Apoio à Decisão Construtivista (MCDA-C. O estudo caracteriza-se como um estudo de caso, de natureza exploratória, e faz uso de entrevista e de análise de documentos internos como estratégia de coleta de dados. Como resultado, constatou-se que o modelo de AD construído para a área de mercado é composto por 08 indicadores financeiros (tangíveis e 39 indicadores não financeiros (intangíveis que respondem pelo desempenho da empresa. Adicionalmente, o artigo apresenta os seguintes resultados: (a identificação de três dimensões que respondem pelo desempenho da área de mercado: stakeholders, vendas e imagem; (b construção de escalas ordinais e cardinais para cada indicador do modelo; (c avaliação do status quo da área de mercado em 25 pontos, em uma escala onde 0 ponto equivale ao nível “neutro” e 100 pontos equivalem ao nível “bom”; e (d demonstração do processo de gerenciamento do desempenho. Conclui-se que o sistema de AD é importante para apoiar o desenvolvimento gerencial das pequenas e médias empresas (PMEs e que a Metodologia MCDA-C é um caminho viável para AD em um contexto complexo onde: (a o gestor desconhece as variáveis que devem ser avaliadas (tangíveis e intangíveis; (b existem particularidades nas PMEs que devem ser consideradas no modelo de AD.ABSTRACTThe work aims to build a model Performance Assessment (PA to the market area in an average industrial company through Multicriteria Decision Aid Constructivist (MCDA-C. The study is characterized as an exploratory case study and makes use of interviews and document analysis as a strategy for data collection. In the results section we present the performance evaluation model elaborated for the market area, where it was possible to identify eight financial indicators (tangible

  4. Um estudo sobre a implantação de sistemas ERP: pesquisa realizada em grandes empresas industriais A study on ERP system implementation: a survey at large industrial companies

    Directory of Open Access Journals (Sweden)

    Lindomar Subtil de Oliveira

    2012-08-01

    Full Text Available A notável expansão dos sistemas ERP gerou muitas discussões entre especialistas, pesquisadores e empresários, no intuito de encontrar uma explicação para os diversos casos de sucesso e insucesso na sua implantação. O objetivo desse estudo empírico foi identificar nas 50 maiores empresas industriais atuantes no Brasil quais os principais fatores que dificultam ou contribuem para o processo de implantação de sistemas ERP. Tratou-se de uma pesquisa aplicada e exploratória. Além do levantamento bibliográfico, elaborou-se um questionário estruturado com 29 perguntas, o qual foi respondido pelos gestores de TI (tecnologia de informação das empresas selecionadas. Os resultados demonstraram que fatores relacionados às dificuldades funcionais do sistema, customização, adaptação aos processos de negócio e carências do ERP no apoio aos planos estratégicos globais foram alguns dos pontos considerados mais complexos. Essencialmente, outros fatores concernentes ao intenso treinamento, engajamento das principais lideranças, fatores humanos, sociais e culturais também foram referidos.The large utilization of ERP systems has become the scope of discussion among specialists, researchers and professionals of the area, with the purpose of finding an answer for the success and failure cases on ERP implementation. This paper aimed to present an experimental study with the 50 biggest industrial companies with activities in Brazil in order to identify the main factors that contribute or hinder ERP implementation processes. This study was characterized by an applied and exploratory research. Besides the bibliographical survey, a structured questionnaire containing 29 questions was elaborated by the researchers and then responded by the IT (Information Technology managers of the selected companies. Results showed that the factors concerning system functionality difficulties, customization, adjustment to business processes, and lack of support

  5. Escola e fábrica: vozes de trabalhadores em uma indústria de ponta School and factory in the voice of workers from a cutting-edge industry

    Directory of Open Access Journals (Sweden)

    Celso João Ferretti

    2003-03-01

    Full Text Available O objetivo deste artigo é o de apresentar parte dos resultados de ampla pesquisa, na qual se estudou a qualificação como construção social, privilegiando-se dois campos de análise: a escola e a fábrica. A pesquisa focalizou uma escola pública, duas unidades do Senai e uma indústria metal-mecânica, localizada no interior do Estado de São Paulo. Neste artigo, discutem-se alguns dados obtidos no âmbito da fábrica, com destaque para o olhar dos trabalhadores sobre as contribuições da escola e da empresa para seu processo de qualificação profissional. Os resultados indicam que há consenso entre os entrevistados sobre o valor da escolarização, não só para o exercício da profissão, mas para a vida social e familiar. Os procedimentos adotados pela indústria, visando à qualificação profissional e à adesão dos trabalhadores aos objetivos empresariais, são também muito bem aceitos. A análise dos dados permitiu, todavia, desvelar conflitos, contradições e idealizações que os discursos consensuais não conseguem de todo ocultar.The aim of this article is to present part of the results of a broader study, in which qualification as a social construction was studied, giving special attention to two fields of analysis: school and factory. The investigation was concentrated on a public school, two Senai technical school units, and a metal-mechanic industry located in the interior of São Paulo State. Only some of the data obtained in the factory are discussed in this article, giving emphasis on how workers see the school and the company's contributions to their professional qualification process. Results point to a consensus among interviewees about the value of education for both their professional work and their social and family life. Procedures adopted by the company aiming at promoting both professional qualification and workers' adherence to corporate objectives are also very well accepted. Nonetheless, analysis of the

  6. <em>Angiostrongylus vasorumem> in red foxes (<em>Vulpes vulpesem> and badgers (<em>Meles melesem> from Central and Northern Italy

    Directory of Open Access Journals (Sweden)

    Marta Magi

    2010-06-01

    Full Text Available Abstract During 2004-2005 and 2007-2008, 189 foxes (<em>Vulpes vulpesem> and 6 badgers (<em>Meles melesem> were collected in different areas of Central Northern Italy (Piedmont, Liguria and Tuscany and examined for <em>Angiostrongylus vasorumem> infection. The prevalence of the infection was significantly different in the areas considered, with the highest values in the district of Imperia (80%, Liguria and in Montezemolo (70%, southern Piedmont; the prevalence in Tuscany was 7%. One badger collected in the area of Imperia turned out to be infected, representing the first report of the parasite in this species in Italy. Further studies are needed to evaluate the role played by fox populations as reservoirs of infection and the probability of its spreading to domestic dogs.
    Riassunto <em>Angiostrongylus vasorumem> nella volpe (<em>Vulpes vulpesem> e nel tasso (<em>Meles melesem> in Italia centro-settentrionale. Nel 2004-2005 e 2007-2008, 189 volpi (<em>Vulpes vulpesem> e 6 tassi (<em>Meles melesem> provenienti da differenti aree dell'Italia settentrionale e centrale (Piemonte, Liguria Toscana, sono stati esaminati per la ricerca di <em>Angiostrongylus vasorumem>. La prevalenza del nematode è risultata significativamente diversa nelle varie zone, con valori elevati nelle zone di Imperia (80% e di Montezemolo (70%, provincia di Cuneo; la prevalenza in Toscana è risultata del 7%. Un tasso proveniente dall'area di Imperia è risultato positivo per A. vasorum; questa è la prima segnalazione del parassita in tale specie in Italia. Ulteriori studi sono necessari per valutare il potenziale della volpe come serbatoio e la possibilità di diffusione della parassitosi ai cani domestici.

    doi:10.4404/hystrix-20.2-4442

  7. Industrial goals

    International Nuclear Information System (INIS)

    Martin, P.

    2005-01-01

    The aim of the third seminar on pellet-clad interaction, which held at Aix en Provence (France) from 9-11 march 2004, was to draw a comprehensive picture of current understanding of pellet clad interaction and its impact on the fuel rod under the widest possible conditions. This document provides the summaries of the five sessions: opening and industrial goals, fuel material behaviour in PCI situation, cladding behaviour relevant to PCI, in-pile rod behaviour, modelling of the mechanical interaction between pellet and cladding. (A.L.B.)

  8. Industrial ventilation

    Science.gov (United States)

    Goodfellow, H. D.

    Industrial ventilation design methodology, using computers and using fluid dynamic models, is considered. It is noted that the design of a ventilation system must be incorporated into the plant design and layout at the earliest conceptual stage of the project. A checklist of activities concerning the methodology for the design of a ventilation system for a new facility is given. A flow diagram of the computer ventilation model shows a typical input, the initialization and iteration loop, and the output. The application of the fluid dynamic modeling techniques include external and internal flow fields, and individual sources of heat and contaminants. Major activities for a ventilation field test program are also addressed.

  9. Determination of strontium isotopic composition in natural waters: examples of application in subsurface waters of the coastal zone of Bragantina region, Para, BR; Determinacao da composicao isotopica de estroncio em aguas naturais: exemplos de sua aplicacao em aguas subsuperficiais da zona costeira na regiao Bragantina-PA

    Energy Technology Data Exchange (ETDEWEB)

    Bordalo, Adriana Oliveira; Moura, Candido Augusto Veloso; Scheller, Thomas [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Centro de Geociencias]. E-mail: adriana@ufpa.br

    2007-07-15

    Analytical procedures used for determining the concentrations and isotope composition of strontium in subsurface waters, by mass spectrometry, are described. Sampling was performed in coastal plateaus, salt marsh and mangrove environments in the coastal region of Para. Coastal plateau waters have {delta}{sup 87}Sr between 1.51 and 6.26 per mille and Sr concentration bellow 58 ppb. Salt marsh waters show {delta}{sup 87}Sr between 0.55 and 0.90 per mille and Sr concentration between 93 and 114 ppm, while mangrove waters have {delta}{sup 87}Sr per mille around zero and Sr concentration above 15 ppm. Differences in the {sup 87}Sr/{sup 86}Sr ratio in these subsurface waters are detected, as well as seasonal variations in the coastal plateau waters. (author)

  10. Assessment of the content of mercury, methylmercury and other elements of interest in fish, hair and diets of pre-school children of the Amazon region; Avaliacao do conteudo de mercurio, metilmercurio e outros elementos de interesse em peixes e em amostras de cabelos e dietas de pre-escolares da regiao Amazonica

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Luciana Aparecida

    2006-07-01

    Studies show that some regions of the Amazon region suffer mercury (Hg) impacts as a direct result of both natural and anthropogenic processes. Jau National Park (PNJ) is the only National Park in Brazil that protects an entire black water basin (Jau River), flood land and tropical reserve. These conditions favor Hg methylation in the aquatic biota. This in turn, exposes living on the river populations to Hg contamination as well as the adjacent regions. Preliminary studies of pre-school children diets from PNJ communities have shown that these diets have a worrisome high Hg content. The present study assessed total Hg content, micro nutrients (Ca, Fe, K, Na, Se and Zn) and macro nutrients (proteins, lipids, ash, energy, carbohydrate) in pre-school diets in the PNJ and surrounding communities. Furthermore, total and Me Hg levels were also determined in hair samples of these children as well as those living in several neighborhoods of the city of Manaus. Included in this determination were the fish most consumed by these populations. From these results it was possible to evaluate the nutritional content of the diets and the exposure of the children to Hg and Se Hg. Cold vapor atomic absorption spectrometry was used to quantify total and Me Hg. Micro nutrient determination was performed using neutron activation analysis technique (NAA) and Macro nutrient through AOAC methodologies (USA). All analytical methods were developed and validated for precision and accuracy by means of reference materials analyses with certified values for the determined elements. Furthermore, the uncertainty sources for Hg and Me Hg determination were assessed and the expanded uncertainties were calculated. Total Hg levels in diets and total and Me Hg levels for hair samples, were well above those values found in different localities of the Amazon region. This also holds true for those surrounding areas of the JNP. For many children Hg intake values passed the 5 mug Hg/body weigh/week (PTWI). Children of the city of Manaus presented much lower Hg levels in hair samples in contrast to those of the PNJ even though both groups shared the same ecosystem. It can thus be concluded that populations that have a wider choice of food products for protein, have a lesser intake of fish and as a consequence less Hg intake. Obtained NAA results furnished reliable concentration values for important nutritional elements, mainly Ca, Fe, K, Na, Se and Zn. From these values the daily intake was calculated and compared to the DRIs (Dietary reference intakes). In general, the diets analysed in this study presented inadequate and deficient protein-caloric levels, confirming these populations high risk and vulnerability to nutritional deficiencies and to Hg exposure. Several external factors can obviously influence the vulnerability of these populations to the toxic effects to Me Hg such as: age, sex, health and nutritional status, intake and dietary interaction. In order to evaluate the influence of the cooking processes (in natura, cooked, fried, baked) regarding micro nutrient and total Hg losses, in order to contribute to future nutritional studies, Hg levels and micro nutrients in fish species most consumed by Manaus residents and surrounding communities were assessed. Micro nutrients and Hg loss variability through the different cooking processes seem to be more related to fish species rather than cooking process. Furthermore, predatory species presented higher Hg and Se levels as was expected. The Hg and Se correlation in fish is also discussed. Although research shows a high Hg background in the Amazon the continuous exposure through food can in time worsen especially in communities that do not have diet diversification, have serious nutritional deficiencies and whose diets are mainly fish. It is hoped that this study can also contribute to future public political actions and policies in terms of reducing dietary hazards due to Hg and Me Hg exposure. (author)

  11. Provenance and depositional age of metavolcano-sedimentary sequences of the Santa Terezinha de Goias, based on Sm-Nd and U-Pb zircon single grain; Proveniencia e idade deposicional de sequencias metavulcano-sedimentares da regiao de Santa Terezinha de Goias, baseada em dados isotopicos Sm-Nd e U-Pb em monocristal de zircao

    Energy Technology Data Exchange (ETDEWEB)

    Dantas, Ellton Luiz; Jost, Hardy; Fuck, Reinhardt A.; Brod, Jose Afonso; Pimentel, Marcio Martins; Meneses, Paulo Roberto [Brasilia Univ., DF (Brazil). Inst. de Geociencias]. E-mail: elton@unb.br

    2001-09-01

    Supracrustal rocks of the Santa Terezinha de Goias region, Central Brazil, presumably represent a southern extension of the Mara Rosa magmatic arc tectonically juxtaposed to Archean terrains and consist of a meta volcanic unit and a meta sedimentary unit. The aim of the paper is to present and discuss the first U-Pb and Sm-Nd data of rocks belonging to both units of that region. U-Pb data of zircons from a felsic meta volcanic rock inter layered with chlorite-rich schists (metandesites?) yield a concordant age of of 660 My, while the Sm-Nd model age of a variety of chlorite-schists indicate a juvenile age between 1.1 and 1.3 Ga. These data indicate that the meta volcanic rocks are Neo proterozoic in age and may be correlated with rocks of the Mara Rosa magmatic arc. On the other hand, the prevailing provenance of rocks belonging to the meta sedimentary unit indicate a Paleoproterozoic, or older, source. Thus, the deposition of both units are explained by means of the erosion of source-areas of variable age. (author)

  12. Gestão do desenvolvimento de produto em empresas de pequeno e médio porte do setor de máquinas e implementos agrícolas do Estado de SP Product development process management in small and medium-sized Brazilian companies in the agricultural machinery and implement industry sector

    Directory of Open Access Journals (Sweden)

    José Carlos de Toledo

    2010-01-01

    Full Text Available Para que as empresas nacionais do setor de máquinas e implementos agrícolas consigam sobreviver e ampliar sua participação nesse mercado em crescimento, do interesse econômico de companhias multinacionais e no qual essas detêm expressiva participação, elas necessitam melhorar a capacitação para desenvolver novos produtos e assim atender as novas demandas quanto a requisitos e homologação dessa produção. As empresas nacionais do setor apresentam um perfil predominante de empresas familiares, de pequeno e médio porte, e pouco se conhece sobre a realidade da gestão do Processo de Desenvolvimento de Produto (PDP nessas organizações. Este trabalho caracteriza e analisa os perfis e a maturidade da gestão do PDP em empresas de pequeno e médio porte de capital nacional do segmento de máquinas e implementos agrícolas do Estado de São Paulo. Foi realizada uma pesquisa de levantamento (survey em 40 empresas. Para a análise dos dados utilizou-se a técnica de análise multivariada de clusters. As empresas da amostra apresentam uma estrutura heterogênea com relação à gestão do PDP. Foram identificados três grupos de empresas, com diferentes perfis de maturidade do PDP: Grupo I (20% da amostra, Grupo II (50% da amostra e Grupo III (30% da amostra. Evidenciam-se diferenças na gestão do PDP principalmente entre os Grupos I (com menor nível de maturidade do PDP e III (com nível de maturidade relativamente mais elevado. Apesar das diferenças na gestão do PDP entre os grupos, comparando-se a prática com o referencial teórico (as boas práticas sobre gestão do PDP, os 3 grupos se encontram no nível geral básico, ou inicial, de maturidade do PDP. A análise e identificação do nível de maturidade em que as empresas se encontram podem auxiliar no direcionamento do processo de melhoria do PDP e na elaboração de políticas públicas que incentivem o desenvolvimento e inovação de produto nas empresas nacionais do setor

  13. Uso do resíduo industrial grits em pavimentos de estradas florestais: influência do período de cura na resistência mecânica e expansão de misturas solo-grits compactadas Use of industrial grits in forest road pavements: influence of curing times on the mechanical strength and swelling of compacted soil-grits mixtures

    Directory of Open Access Journals (Sweden)

    Reginaldo Sérgio Pereira

    2006-10-01

    Full Text Available Analisou-se a influência do teor de estabilizante, da energia de compactação e do período de cura na resistência mecânica e expansão de dois solos da Zona da Mata Norte de Minas Gerais. As amostras de solos residuais de gnaisse coletadas na cidade de Viçosa, MG, Brasil, respectivamente, de texturas argilo-areno-siltosa e areno-argilo-siltosa, foram denominadas solos 1 e 2. Empregou-se como estabilizante químico o resíduo "grits" fornecido pela empresa de Celulose Nipo Brasileira (CENIBRA; os teores, em massa, de 4, 8, 12, 16, 20, 24 e 28% desse resíduo foram utilizados nas misturas solo-"grits". Corpos-de-prova das misturas solo-"grits" foram compactados nos teores ótimos de umidade relativos às energias de compactação dos ensaios Proctor intermediário e modificado e curados por 0, 7, 28 e 90 dias. Avaliou-se a resistência mecânica dos solos e misturas através dos seguintes parâmetros: (a índice de suporte Califórnia (ISC ou CBR, resistência à compressão não confinada (RCNC e resistência à tração em compressão diametral (Rt. Os resultados permitiram concluir que todos os parâmetros considerados na análise influenciaram, significativamente, a resistência mecânica das misturas solo-"grits", sendo o comportamento das misturas solo 1-"grits" influenciado, também, pelo teor de sódio presente na constituição química do "grits".This paper addresses the influence of stabilizer content, compaction effort and curing time on the mechanical strength and swelling of two soils from the "Zona da Mata Norte" region, State of Minas Gerais, Brazil. Two residual gneiss soils from the municipality of Viçosa, Brazil, silt-sand-clay and silt-clay-sandy soils named soils 1 and 2, respectively, were used in this study. Industrial grits provided by Celulose Nipo Brasileira - CENIBRA was used as stabilizer, with contents ranging from 4 to 28 % regarding soil dry mass. Specimens of soil-grits mixtures were compacted at the

  14. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial Influence of kaolin waste addition on technological properties of a standard stoneware formulation produced in industrial scale

    Directory of Open Access Journals (Sweden)

    M. L. Varela

    2009-06-01

    Full Text Available Atualmente existe uma grande preocupação por parte das indústrias com a disposição dos resíduos gerados ao longo do processo produtivo. No setor mineral não é diferente, pois este gera grande volume de resíduos. Verificou-se que a indústria de beneficiamento do caulim descarta grandes volumes de resíduo constituído basicamente de caulinita, mica muscovita e quartzo, ocasionando um impacto ambiental, o que tem justificado os esforços de pesquisas para sua solução. Deste modo, foi estudado o efeito da incorporação de um resíduo proveniente do beneficiamento de caulim sobre as propriedades físicas e tecnológicas de revestimentos cerâmicos de alta qualidade. O objetivo é caracterizar e estudar o processamento do resíduo proveniente da indústria de beneficiamento do caulim com adição de uma "massa padrão", fornecida por uma indústria de revestimento cerâmico. O resíduo foi caracterizado por meio de análises de difração de raios X, fluorescência de raios X e determinação do tamanho de partículas. Foram realizados ensaios de absorção de água, porosidade aparente, retração linear após queima, massa específica aparente e tensão de ruptura à flexão, para determinação das propriedades tecnológicas destes materiais. Os resultados mostram que o resíduo estudado pode ser considerado como matéria-prima de grande potencial para a indústria de pisos e revestimentos cerâmicos.There is a great concern by the industrial area on the disposal of waste generated during the production process. In the mineral sector the situation is the same, because large volumes of waste are disposed. The kaolin processing industry generates waste consisting mainly of kaolinite, mica and quartz muscovite, causing an environmental impact, justifying the research efforts to find a solution for this problem. The effect of the waste from the kaolin processing incorporation on the technological and physical properties of high quality

  15. Estratégias competitivas e de desenvolvimento de produtos lácteos funcionais: estudos de caso em empresas agroindustriais da região Sul do Brasil Competitive and product development strategies in functional dairy products: case studies in food processing industries from south Brazil

    Directory of Open Access Journals (Sweden)

    Mateus Silva de Lima

    2009-08-01

    Full Text Available Esta pesquisa buscou compreender o motivo e o modo como as empresas agroindustriais brasileiras desenvolvem novos produtos e se orientam para o mercado no segmento de alimentos lácteos funcionais. Ela também examina o papel do sistema regulatório nesse processo. Foi utilizada a abordagem de estudos de caso para esclarecer as inter-relações sistêmicas e trade-offs entre os fatores relacionados à inovação. Foi escolhido um desenho de pesquisa com uma unidade de análise (empresas agroindustriais que, recentemente, lançaram novos produtos no mercado de lácteos funcionais e estudos de caso múltiplos (três empresas agroindustriais da região Sul. Os resultados revelam que as empresas agroindustriais adotam estratégias seguidoras em relação às concorrentes multinacionais. Tradicionalmente, essa é uma estratégia considerada mais segura e exige menores investimentos em P&D e marketing. Contudo, ela corrói a imagem de marca e limita os retornos financeiros das inovações. O comportamento seguidor é resultado de um baixo grau de orientação para mercado e restrita cooperação com parceiros externos. Esse "ciclo vicioso" é reforçado pelas barreiras estabelecidas pelo sistema regulatório.This multi-case study searched to understand why and how food processing industries develop new products and market orientates to compete in the Brazilian functional dairy market. It also examines the regulatory framework role in this process. We use case studies as an approach to give evidence of the systemic relations and the existent trade-offs among factors related to innovation. We chose a research design with one unity of analysis (food processors that recently launched new products in the functional dairy market and multiple case studies (three Brazilian dairies of the southern region. The results reveal that the enterprises adopt a second-mover strategy vis-à-vis the multinational competitors. Traditionally, this strategy is considered

  16. Uso dos Atributos da Contabilidade Gerencial Propostos por Moores e Yuen (2001 em Empresas de um Segmento Industrial de Santa CatarinaUse of the Management Accounting Attributes Proposed by Moores and Yuen (2001 in Companies of an Industry in de State of Santa CatarinaUso de los Atributos de la Contabilidad de Gestión Propuestos por Yuen y Moores (2001 en Empresas de un Segmento de la Industria de Santa Catarina

    Directory of Open Access Journals (Sweden)

    BEUREN, Ilse Maria

    2012-12-01

    Full Text Available RESUMOO sistema de contabilidade gerencial deve prover os gestores de informações para o cumprimento de objetivos e metas da organização, adaptadas à realidade e estratégias organizacionais. O estudo objetiva averiguar o uso dos atributos da contabilidade gerencial, conforme proposto por Moores e Yuen (2001, nas empresas do segmento industrial de máquinas, aparelhos e materiais elétricos do Estado de Santa Catarina. Pesquisa descritiva realizou-se por meio de levantamento com aplicação de questionário aos gestores das empresas, cujas questões foram adaptadas de Necyk (2008, fundamentadas na proposição de Moores e Yuen (2001. A população compreende as 264 empresas listadas na Secretaria da Fazenda do Estado de Santa Catarina do referido segmento de atividade econômica, e a amostra não aleatória constitui-se das 40 que responderam à pesquisa. Os resultados mostram que os atributos da contabilidade gerencial propostos por Moores e Yuen (2001 em suas duas vertentes são utilizados nas empresas. O atributo seleção de informações, que aborda as fontes de informações utilizadas, obteve concordância de 57%. O atributo apresentação de informações, que aborda formato, tipo e disponibilidade das informações, obteve concordância de 64%. Conclui-se que as empresas participantes da pesquisa utilizam tipos de informações diversificados em maior proporção do que as fontes de informações, ainda que várias dessas informações não estejam sendo apresentadas no formato adequado, podendo prejudicar sua relevância na tomada de decisões.ABSTRACTThe management accounting system should provide to managers the information required to accomplish goals and objectives of the organization, adapted to reality and organizational strategies. The goal of this study is to investigate the use of the management accounting attributes, as proposed by Moores and Yuen (2001, in companies operating in the machinery, electrical equipment and

  17. Assessment of atmospheric metallic pollution in the metropolitan region of Sao Paulo, Brazil, employing Tillandsia usneoides L. as biomonitor; Avaliacao da poluicao atmosferica por metais na regiao metropolitana de Sao Paulo, Brasil, utilizando a bromelia Tillandsia usneoides L. como biomonitor

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, Claudio Ailton

    2006-07-01

    Tillandsia usneoides L. is an epiphytic bromeliad that lives on trees or other kinds of inert substrates, absorbing water and nutrients directly from the environment without roots. Due to its morphological and physiological characteristics, this species accumulates the pollutants present in the atmosphere. In the present work, Tillandsia usneoides was used as a bio monitor of metal atmospheric pollution in Sao Paulo, Brazil, which is the biggest city in South America with a population of 18 million inhabitants and a strong industrial activity. The urban area is polluted by industrial emissions but, according to the Environmental Protection Agency of the State of Sao Paulo (CETESB), the governmental agency of air quality control, regularly occurring emissions from about 7.8 million motor vehicles provide the principal source of air pollution. The Tillandsia samples were collected from an unpolluted area and were exposed bimonthly in 10 sites of the city with different pollution levels and in a control site. After exposure, trace metals were analyzed in the plant by instrumental neutron activation analysis and ICP-MS (Pb, Cd, Co, Cu, Ni, Sb e V). The results of the investigation showed a notable concentration of Co and Ni in the plants exposed in an industrial area where there is a metal processing plant, which produces about 600 tons/year of Co and 16,000 tons/year of Ni. Copper and chromium were equally distributed in industrial regions and in sites near heavy traffic avenues, suggesting that these elements can be associated to both vehicular and industrial sources. A high accumulation of Cd in the plant exposed in industrial areas indicates industrial activities as the main source of this element. For Pb, no evident sources could be identified so far as it was spread evenly along the monitoring sites. Traffic-related elements such as Zn, Ba and Sb presented high concentrations in plants exposed in sites near to heavy traffic avenues (cars, buses and trucks) and

  18. Industrial chemistry engineering

    International Nuclear Information System (INIS)

    1993-01-01

    This book on industrial chemistry engineering is divided in two parts. The first part deals with industrial chemistry, inorganic industrial chemistry, organic industrial chemistry, analytical chemistry and practical questions. The last parts explain the chemical industry, a unit parts and thermodynamics in chemical industry and reference. It reveals the test subjects for the industrial chemistry engineering with a written examination and practical skill.

  19. Industrial irradiation

    International Nuclear Information System (INIS)

    Stirling, Andrew

    1995-01-01

    Production lines for rubber gloves would not appear to have much in common with particle physics laboratories, but they both use accelerators. Electron beam irradiation is often used in industry to improve the quality of manufactured goods or to reduce production cost. Products range from computer disks, shrink packaging, tyres, cables, and plastics to hot water pipes. Some products, such as medical goods, cosmetics and certain foodstuffs, are sterilized in this way. In electron beam irradiation, electrons penetrate materials creating showers of low energy electrons. After many collisions these electrons have the correct energy to create chemically active sites. They may either break molecular bonds or activate a site which promotes a new chemical linkage. This industrial irradiation can be exploited in three ways: breaking down a biological molecule usually renders it useless and kills the organism; breaking an organic molecule can change its toxicity or function; and crosslinking a polymer can strengthen it. In addition to traditional gamma irradiation using isotopes, industrial irradiation uses three accelerator configurations, each type defining an energy range, and consequently the electron penetration depth. For energies up to 750 kV, the accelerator consists of a DC potential applied to a simple wire anode and the electrons extracted through a slot in a coaxially mounted cylindrical cathode. In the 1-5 MeV range, the Cockcroft-Walton or Dynamitron( R ) accelerators are normally used. To achieve the high potentials in these DC accelerators, insulating SF6 gas and large dimension vessels separate the anode and cathode; proprietary techniques distinguish the various commercial models available. Above 5 MeV, the size of DC accelerators render them impractical, and more compact radiofrequency-driven linear accelerators are used. Irradiation electron beams are actually 'sprayed' over the product using a magnetic deflection system. Lower energy beams of

  20. Ensaios de penetração de Salmonella Enteritidis em ovos de galinha com diferentes qualidades de casca, submetidos ou não a lavagem industrial e a duas temperaturas de armazenagem Penetration of Salmonella Enteritidis in chicken eggs, comparing different shell quality, industrial washing and temperature of storage

    Directory of Open Access Journals (Sweden)

    A.T. Pinto

    2009-10-01

    Full Text Available Estudou-se o comportamento da Salmonella Enteritidis quando em contato com a superfície de ovos de consumo, classificados de acordo com a qualidade da casca ou com tratamentos (lavados ou não, usando fezes de aves como veículo de contaminação, e armazenados a 8°C e 70% de umidade relativa ou a 30°C e 90% de umidade relativa. A 8°C, o microrganismo permaneceu viável na superfície dos ovos, ao longo do tempo, enquanto a 30°C foi possível identificar a sua inibição e até sua eliminação da superfície. A contaminação do conteúdo de ovos com defeito de casca foi mais frequente quando os ovos foram submetidos a temperaturas inadequadas de armazenagem (30°C.Salmonella Enteriditis behavior was studied when present on the surface of consume eggs, classified according to the shell quality or treatments (washed or not. Stools of fowls were used as a vehicle for contamination. The eggs were stored at 8°C and 70% relative humidity or at 30°C and 90% of relative humidity. At 8°C, the microorganism stayed viable on the surface of the eggs throughout the study, while at 30°C it was inhibited and eliminated from the egg shell. The contamination of content of the eggs with shell defect was more frequent when they were submitted to inappropriate temperatures of storage (30°C.

  1. Development and characterization of ceramic composites based on alumina-titania reinforced with rare earth oxide (holmium oxide) for the production of inert coatings in metal tanks of petroleum industry; Desenvolvimento e caracterizacao de compositos ceramicos baseados em alumina-titania reforcados com oxido de terra rara (oxido de holmio) para fabricacao de revestimentos inertes em tanques metalicos da industria petrolifera

    Energy Technology Data Exchange (ETDEWEB)

    Silva, N.D.G.; Pontual, J.O.; Ferreira, R.A.S.; Yadava, Y.P., E-mail: nokaa_demery@hotmail.com, E-mail: yadava@ufpe.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Engenharia Mecanica

    2014-07-01

    Due to the importance of petroleum and its derivatives for modern society, it is necessary to develop technologies that improve processes and transports of petroleum. The crude oil creates hostile environments and in the process of transport and storage of petroleum are used metallic materials, which corrode becoming a critical problem in this industry. One way of solving this problem is the use of ceramics based on alumina as inert coating on hostile environments. In this work was studied a structure, microstructure and mechanical properties of ceramic composite based on Al2O3 - TiO2 reinforced Ho2O3. The composites were produced by a thermomechanical process, sintered at 1350°C, were analyzed by x-ray diffraction, optical microscopy, scanning electron microscopy, and microhardness. Analyses were performed before and after immersion in earth and offshore crude petroleum to study stability of the developed composites and concluded that the ceramic composites immersed in petroleum show stable in hostile environments. (author)

  2. Industrial robot

    Science.gov (United States)

    Prakashan, A.; Mukunda, H. S.; Samuel, S. D.; Colaco, J. C.

    1992-11-01

    This paper addresses the design and development of a four degree of freedom industrial manipulator, with three liner axes in the positioning mechanism and one rotary axis in the orientation mechanism. The positioning mechanism joints are driven with dc servo motors fitted with incremental shaft encoders. The rotary joint of the orientation mechanism is driven by a stepping motor. The manipulator is controlled by an IBM 386 PC/AT. Microcomputer based interface cards have been developed for independent joint control. PID controllers for dc motors have been designed. Kinematic modeling, dynamic modeling, and path planning have been carried out to generate the control sequence to accomplish a given task with reference to source and destination state constraints. This project has been sponsored by the Department of Science and Technology, Government of India, New Delhi, and has been executed in collaboration with M/s Larsen & Toubro Ltd, Mysore, India.

  3. Industrial radiography

    International Nuclear Information System (INIS)

    1992-01-01

    Industrial radiography is a non-destructive testing (NDT) method which allows components to be examined for flaws without interfering with their usefulness. It is one of a number of inspection methods which are commonly used in industry to control the quality of manufactured products and to monitor their performance in service. Because of its involvement in organizing training courses in all the common NDT methods in regional projects in Asia and the Pacific and Latin America and the Caribbean and in many country programmes, the Agency is aware of the importance of standardizing as far as possible the syllabi and training course notes used by the many experts who are involved in presenting the training courses. IAEA-TECDOC-628 ''Training Guidelines in Non-destructive Testing'' presents syllabi which were developed by an Agency executed UNDP project in Latin America and the Caribbean taking into account the developmental work done by the International Committee for Non-destructive Testing. Experience gained from using the radiography syllabi from TECDOC-628 at national and regional radiography training courses in the Agency executed UNDP project in Asia and the Pacific (RAS/86/073) showed that some guidance needed to be given to radiography experts engaged in teaching at these courses on the material which should be covered. The IAEA/UNDP Asia and Pacific Project National NDT Coordinators therefore undertook to prepare Radiography Training Course Notes which could be used by experts to prepare lectures for Level 1,2 and 3 radiography personnel. The notes have been expanded to cover most topics in a more complete manner than that possible at a Level 1, 2 or 3 training course and can now be used as source material for NDT personnel interested in expanding their knowledge of radiography. Refs, figs and tabs

  4. Disposição em aterros controlados de resíduos sólidos industriais não-inertes: avaliação dos componentes tóxicos e implicações para o ambiente e para a saúde humana Non-inert industrial solid waste disposal in landfill dumps: evaluation of toxicity and implications for the environment and human health

    Directory of Open Access Journals (Sweden)

    Cristina L. S. Sisinno

    2003-04-01

    Full Text Available Para que um resíduo sólido seja disposto adequadamente, é necessário classificá-lo segundo as Normas Técnicas Brasileiras, cuja principal é a NBR 10.004. Resíduos sólidos industriais não-inertes normalmente têm sido encaminhados para disposição final em aterros controlados, que em sua maioria não operam de forma eficiente, além de estarem geralmente localizados próximos a núcleos populacionais e ecossistemas importantes. A fim de avaliar a toxicidade potencial dos resíduos produzidos em indústrias de diferentes segmentos, 21 amostras foram analisadas de acordo com as orientações descritas na NBR 10.004. Das amostras estudadas, 18 foram classificadas como resíduos não-inertes. Os principais parâmetros que contribuíram para a classificação das amostras em resíduos não-inertes foram: alumínio, ferro, manganês, fenol e surfactantes. Destes, o alumínio, o manganês e o fenol são as substâncias de maior interesse toxicológico para a saúde humana e ambiental, uma vez que podem alterar a qualidade das águas subterrâneas localizadas nas áreas de disposição de resíduos.According to Brazilian recommended technical procedures (mainly NBR 10,004, solid waste must be previously classified in order to be disposed of adequately. Non-inert industrial solid waste is being dumped in landfill areas, most of which operate inefficiently and are located near the population and important ecosystems. In order to evaluate the potential toxicity of solid waste produced by various types of industries, 21 samples were analyzed according to NBR 10,004 procedures. Of these, 18 were classified as non-inert solid waste. The main substances contributing to the classification of these samples as non-inert waste were: aluminum, iron, manganese, phenol, and surfactants. Aluminum, manganese, and phenol are the main toxicologically relevant substances for human and environmental health because they can alter the quality of groundwater

  5. The natural gas as a strategic option for the development of Brazil Northeastern region; O gas natural como uma opcao estrategica para o desenvolvimento da Regiao Nordeste Setentrional do Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Marcusso, Jose Luiz; Lima Junior, Giovanni G.B.; Nascimento Filho, Epitacio [PETROBRAS, Natal/Fortaleza, RN/CE (Brazil). Gerencia de Exploracao e Producao

    1995-12-31

    This paper presents development, status and future of natural gas industry in northeastern Brazil (States of Rio Grande do Norte and Ceara), highlighting the gradual increase in product offering and showing main difficulties in achieving a larger market share. PETROBRAS (Brazilian National Oil Company) contribution for economical development of these is also pointed up. (author). 10 refs., 8 figs

  6. Development and characterization of ceramic composites alumina-titania based reinforced with lanthanum oxide for fabrication of inert coatings for metallic tanks of the oil industry; Desenvolvimento e caracterizacao de compositos ceramicos baseados em alumina-titania reforcados com oxido de lantanio para fabricacao de revestimentos inertes em tanques metalicos da industria petrolifera

    Energy Technology Data Exchange (ETDEWEB)

    Bandeira, J.M.; Yadava, Y.P.; Silva, N.D.G.; Ferreira, R.A.S., E-mail: julianamb91@gmail.com, E-mail: yadava@ufpe.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Centro de Tecnologia e Geociencias. Departamento de Engenharia Mecanica

    2016-07-01

    Crude petroleum is highly corrosive causing superficial degradation in metallic tanks used for storage and transportation of this material, which causes a serious problem in the oil industry. An alternative to solve this problem is to use some kind of coating that is inert to this kind of corrosion. Alumina and titania are interesting materials for several engineering applications because, when compared with other ceramic materials, they present superior mechanical properties, e.g. high mechanical strength, good chemical stability and high fracture toughness combined with good wear resistance and a coefficient of thermal expansion close to the iron's, which makes them fit to use in ceramic hardening process and coating. In this paper, alumina-titania ceramic composites with 5%, 10%, 15% and 20% of titania (TiO2) and reinforced with 2% of lanthanum oxide of were produced by thermo-mechanical processing and sintering techniques at 1350 deg C. In these composites, microstructure and mechanical properties were analyzed using X-ray spectroscopy, optical microscopy, scanning electron microscopy and Vickers hardness in order to evaluate their applicability. X-ray spectroscopy showed the formation of composite without the presence of other phases. Optical microscopy and scanning electron microscopy showed a homogeneous microstructure in terms of particle size and distribution. Vickers hardness test showed a gradual decrease in hardness with the addition of titania. The composite with 5% of titania and 2% of lanthanum oxide is the best choice for structural applications. The composites were submerged in crude petroleum for 30 days to study their stability in such environment. Through the analysis of X-ray spectroscopy, optical microscopy and Vickers hardness before and after the submersion in crude petroleum, it was not observed structural or microstructural degradation nether alterations in mechanical properties. This way, it was concluded that these composites have

  7. Assessment of industrial wastes in mortar layers deposited on stainless steel sheets of sinks Avaliação de resíduos industriais em camadas de argamassas depositadas sobre chapas de aço inoxidável de pias

    Directory of Open Access Journals (Sweden)

    E. Gemelli

    2004-12-01

    cimento, areia, poliestireno, fibras de polipropileno e água. Essas argamassas foram produzidas e envelhecidas em um quarto à temperatura atmosférica por 7, 14, 28, 60 e 90 dias com ou sem secagem inicial em estufa. Após 90 dias de cura a tensão de resistência à flexão das argamassas SM, AM1 e AM2 foi, respectivamente, de 5,21, 3,84 e 1,42 MPa. Nas argamassas SM e AM1 foram encontradas as fases C-S-H, Ca(OH2, SiO2, AFm e AFt (monossulfato/etringita. A argamassa AM2 apresentou, além das fases mencionadas acima, CaCO3. Este composto é proveniente do resíduo têxtil que é composto essencialmente de CaCO3 e Ca(OH2. A diminuição da resistência à flexão da argamassa AM1, comparada com a argamassa SM, é provocada pela presença de poliestireno enquanto que a diminuição da resistência mecânica da argamassa AM2 é devido à presença de poliuretano e resíduo têxtil. Contudo, a resistência mecânica à flexão da argamassa A2 se mantém acima do mínimo exigido pela aplicação industrial (1 MPa.

  8. Geração de resíduos de madeira e derivados da indústria moveleira em função das variáveis de produção Generation of wood waste and derivatives on furniture industry related to production's variables

    Directory of Open Access Journals (Sweden)

    Éverton Hillig

    2009-01-01

    Full Text Available Os processos produtivos da cadeia madeira-móveis geram quantidades significativas de resíduos de madeira, os quais nem sempre têm uma destinação correta. O potencial de aproveitamento destes resíduos é significativo, quer seja como matéria-prima secundária, quer seja pelo seu potencial energético. O gerenciamento dos resíduos é um dos desafios à gestão e ao desempenho ambiental das empresas. Neste trabalho, utilizou-se a análise multivariada, com extração de componentes principais, para analisar os carregamentos de cada variável original e identificar as principais variáveis que apresentam similaridades em relação à geração de resíduos. As variáveis de produção consideradas foram: quantidade de matéria-prima consumida, número de colaboradores, número de máquinas, consumo de energia e consumo de água. Por meio de regressão linear, utilizando o método stepwise, foram obtidas as equações de estimativa dos resíduos em função das variáveis de produção originais, resultando na quantidade de resíduo gerado por classe de matéria-prima, para determinada empresa ou determinado município pesquisado. A estimativa de geração foi aplicada ao Pólo Moveleiro da Serra Gaúcha/RS.The production processes of furniture industry generate significant amounts of wood waste, which has not always a correct destination. The potential for exploitation of these residues is significant, whether as secondary raw material, whether by its energy potential. The management of this waste is one of the challenges for the management and environmental performance of companies. This work used multivariate analysis with the extraction of key components, to analyze the load of each original variable and identify key variables that have similarities in relation to the waste generation. The variables of production considered was: quantity of raw materials consumed, number of employees, number of machines, energy consumption and water

  9. International EMS Systems

    DEFF Research Database (Denmark)

    Langhelle, Audun; Lossius, Hans Morten; Silfvast, Tom

    2004-01-01

    exist, however, especially within the ground and air ambulance service, and the EMS systems face several challenges. Main problems and challenges emphasized by the authors are: (1) Denmark: the dispatch centres are presently not under medical control and are without a national criteria based system......Emergency medicine service (EMS) systems in the five Nordic countries have more similarities than differences. One similarity is the involvement of anaesthesiologists as pre-hospital physicians and their strong participation for all critically ill and injured patients in-hospital. Discrepancies do....... Access to on-line medical advice of a physician is not available; (2) Finland: the autonomy of the individual municipalities and their responsibility to cover for primary and specialised health care, as well as the EMS, and the lack of supporting or demanding legislation regarding the EMS; (3) Iceland...

  10. A poliomielite em Sergipe

    Directory of Open Access Journals (Sweden)

    Hélio A. Oliveira

    1994-06-01

    Full Text Available Os autores apresentam estudo retrospectivo da poliomielite em Sergipe. Dividem o estudo em três períodos levando em consideração a taxa de notificação de casos positivos e enfatizam o período que vai de 1979 a 1989, pelo estudo de 159 casos consecutivos. As seguintes informações foram levantadas para cada caso: sexo, idade, procedência, estado vacinai anterior e evolução clínica. São também avaliadas a incidência anual, relação incidência/cobertura vacinai e distribuição geográfica. Tecem comentários sobre os surtos epidêmicos ocorridos em 1984 e 1986, sobre as alterações na circulação do poliovírus selvagem (P1 para P3 e sobre problemas relacionados à não aquisição de imunidade em crianças com esquema vacinal completo. Consideram a poliomielite controlada no Estado, mas enfatizam a necessidade de manutenção de Vigilância epidemiológica efetiva para todos os casos de paralisia aguda e flácida em menores de 14 anos de idade.

  11. EM type radioactive standards. Radioaktivni etalony EM

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The standard contains technical specifications and conditions of production, testing, packing, transport and storage of EM type planar calibration standards containing radionuclides /sup 14/C, /sup 60/Co, /sup 90/Sr, /sup 137/Cs, /sup 147/Pm, /sup 204/Tl, /sup 239/Pu, /sup 241/Am and natural U. The terminology is explained, the related Czechoslovak standards and legal prescriptions given and amendments to these prescriptions presented.

  12. Industrial radiographies

    CERN Multimedia

    2005-01-01

    The Radiation Protection group wishes to remind CERN staff responsible for contractors performing X-ray inspections on the CERN sites that the firms must apply the legislation in force in their country of origin, in particular with regard to the prevention of risks relating to ionizing radiation. Industrial radiography firms called on to work on the CERN sites must also comply with the rules laid down in CERN's Radiation Safety Manual and be registered in the relevant CERN database. Since CERN is responsible for safety on its own site, a number of additional rules have been laid down for this kind of work, as set out in Radiation Protection Procedure PRP30 https://edms.cern.ch/file/346848/LAST_RELEASED/PRP30.pdf The CERN Staff Member responsible for the contract shall register the company and issue notification that an X-ray inspection is to be performed via the web interface at the following address: http://cern.ch/rp-radio

  13. Training industry needs & Technology Industry needs

    NARCIS (Netherlands)

    Klemke, Roland; Kuula, Timo; Helin, Kaj; Wild, Fridolin

    2017-01-01

    This deliverable joins D1.1 (User Industry Needs) and D1.2 (Technology Industry Needs and Affordances) and reports on the outcomes of Tasks T1.1 (Training Industry Assessment) and T1.2 (Technology Industry Assessment). We merged the deliverables for the following reasons: For readability ease we

  14. Industrial emerging chemicals in the environment

    Directory of Open Access Journals (Sweden)

    Vojinović-Miloradov Mirjana B.

    2014-01-01

    Full Text Available In the recent time, considerable interest has grown concerning the presence of the emerging industrial chemicals, EmIC. They are contaminants that have possible pathway to enter to the environment and they are dominantly released by industrial and anthropogenic activities. EmIC are applied in different fields using as industrial chemicals (new and recently recognized, global organic contaminants (flame retardant chemicals, pharmaceuticals (for both human and animal uses, endocrine-modulating compounds, biological metabolites, personal care products, household chemicals, nanomaterial (energy storage products, lubricants, anticorrosive and agriculture chemicals and others that are applied to a wide variety of everyday items such as clothing, upholstery, electronics and automobile interiors. NORMAN (Network of reference laboratories for monitoring of emerging environmental pollutants has established an open, dynamic, list of emerging substances and pollutants. EmIC have been recently detected in the environment due to their long-term presence, pseudo-persistence and increased use. Improvements in sophisticated analytical methods and time integrative passive sampling have enabled the identification and quantification of EmIC, in very low concentrations (ppb, ppt and lower, which likely have been present in all environmental mediums for decades. Passive technology is an innovative technique for the time-integrated measurement of emerging contaminants in water, sediment, soil and air. Passive samplers are simple handling cost-effective tool that could be used in environmental monitoring programmes. These devices are now being considered as a part of an emerging strategy for monitoring a range of emerging industrial chemicals and priority pollutants in the aquatic environment. EmIC are substances that are not included in the routine monitoring programmes and whose fate, behaviour and (ecotoxicological effects are still not well understood. Emerging

  15. Purification, Characterization and Antioxidant Activities <em>in Vitroem>> em>and <em>in Vivoem> of the Polysaccharides from <em>Boletus edulisem> Bull

    Directory of Open Access Journals (Sweden)

    Yijun Fan

    2012-07-01

    Full Text Available A water-soluble polysaccharide (BEBP was extracted from <em>Boletus edulis em>Bull using hot water extraction followed by ethanol precipitation. The polysaccharide BEBP was further purified by chromatography on a DEAE-cellulose column, giving three major polysaccharide fractions termed BEBP-1, BEBP-2 and BEBP-3. In the next experiment, the average molecular weight (Mw, IR and monosaccharide compositional analysis of the three polysaccharide fractions were determined. The evaluation of antioxidant activities both <em>in vitroem> and <em>in vivo em>suggested that BEBP-3 had good potential antioxidant activity, and should be explored as a novel potential antioxidant.

  16. Sulla presenza di <em>Sorex antinoriiem>, <em>Neomys anomalusem> (Insectivora, Soricidae e <em>Talpa caecaem> (Insectivora, Talpidae in Umbria

    Directory of Open Access Journals (Sweden)

    A.M. Paci

    2003-10-01

    Full Text Available Lo scopo del contributo è di fornire un aggiornamento sulla presenza del Toporagno del Vallese <em>Sorex antinoriiem>, del Toporagno acquatico di Miller <em>Neomys anomalusem> e della Talpa cieca <em>Talpa caecaem> in Umbria, dove le specie risultano accertate ormai da qualche anno. A tal fine sono stati rivisitati i reperti collezionati e la bibliografia conosciuta. Toporagno del Vallese: elevato di recente a livello di specie da Brünner et al. (2002, altrimenti considerato sottospecie del Toporagno comune (<em>S. araneus antinoriiem>. È conservato uno di tre crani incompleti (mancano mandibole ed incisivi superiori al momento prudenzialmente riferiti a <em>Sorex> cfr. <em>antinorii>, provenienti dall?Appennino umbro-marchigiano settentrionale (dintorni di Scalocchio - PG, 590 m. s.l.m. e determinati sulla base della pigmentazione rossa degli ipoconi del M1 e M2; Toporagno acquatico di Miller: tre crani (Breda in Paci e Romano op. cit. e un esemplare intero (Paci, ined. sono stati trovati a pochi chilometri di distanza gli uni dall?altro tra i comuni di Assisi e Valfabbrica, in ambienti mediocollinari limitrofi al Parco Regionale del M.te Subasio (Perugia. In provincia di Terni la specie viene segnalata da Isotti (op. cit. per i dintorni di Orvieto. Talpa cieca: sono noti una femmina e un maschio raccolti nel comune di Pietralunga (PG, rispettivamente in una conifereta a <em>Pinus nigraem> (m. 630 s.l.m. e nelle vicinanze di un bosco misto collinare a prevalenza di <em>Quercus cerrisem> (m. 640 s.l.m.. Recentemente un terzo individuo è stato rinvenuto nel comune di Sigillo (PG, all?interno del Parco Regionale di M.te Cucco, sul margine di una faggeta a 1100 m s.l.m. In entrambi i casi l?areale della specie è risultato parapatrico con quello di <em>Talpa europaeaem>.

  17. Energy management in wooden industry; Gestao energetica em industrias madeireiras

    Energy Technology Data Exchange (ETDEWEB)

    Cagnon, Jose Angelo; Valarelli, Ivaldo de Domenico; Rodrigues, Ricardo Martini [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Fac. de Engenharia. Dept. de Engenharia Eletrica], Emails: jacagnon@feb.unesp.br, ivaldo@feb.unesp.br, martini@feb.unesp.br

    2006-07-01

    The objective of this work is the use of a methodology developed for the evaluation of the energy performance in wooden plants, aiming the application of a energy management program, for products and processes improvement, observing a reliable technical and economic implementation. (author)

  18. Industry and the environment - voluntary initiatives

    International Nuclear Information System (INIS)

    Olsen, K.; Guldborg, S.

    1997-01-01

    For some time industry in general has sought to take visible initiatives which demonstrate its sense of responsibility in respect of the environment. A main motivation is to ensure a business based approach, to establish a partnership with policy makers, which will reduce the necessity of command and control measures. In 1989 the European Commission invited Eurogas and other energy industries to develop Codes of Conduct in relation to the environment, based on specific guiding principles. The natural gas industry continues to seek ways to build on the advantages of its product and to aim for all-round improvement with regard to environmental policies. The potential and importance of the Environmental Management Systems (EMSs) is increasingly developed by companies within Europe and internationally. The key elements of the proposed EMS system for the gas industry are presented in detail. (R.P.)

  19. Methyl 2-Benzamido-2-(1<em>H>-benzimidazol-1-ylmethoxyacetate

    Directory of Open Access Journals (Sweden)

    Alami Anouar

    2012-09-01

    Full Text Available The heterocyclic carboxylic α-aminoester methyl 2-benzamido-2-(1<em>H>-benzimidazol-1-ylmethoxyacetate is obtained by <em>O>-alkylation of methyl α-azido glycinate <em>N>-benzoylated with 1<em>H>-benzimidazol-1-ylmethanol.

  20. North Kalimantan is Free From EMS (Early Mortality Syndrome) in the Shrimps

    OpenAIRE

    Lestiawan, Sab; Jati, Nugroho Sasongko; Wiro, Hermas

    2014-01-01

    The acute hepatopancreatic necrosis syndrome (AHPNS) or also known worldwide as early mortility syndrome (EMS) is very dangerous for the shrimps industry since it really strikes the shrimps by larvae size. The EMS attacks shrimps at 20 to 30 days of age and at 40 days of age as well. All the shrimps that are being infected will be dead righ away. The EMS has caused the significant economic losses in the shrimps industry due to the mass mortality of the shrimps in Vietnam (in the years of 2010...

  1. A specimen of <em>Sorex> cfr. <em>samniticus> in Barn Owl's pellets from Murge plateau (Apulia, Italy / Su di un <em>Sorex> cfr. <em>samniticus> (Insectivora, Soricidae rinvenuto in borre di <em>Tyto albaem> delle Murge (Puglia, Italia

    Directory of Open Access Journals (Sweden)

    Giovanni Ferrara

    1992-07-01

    Full Text Available Abstract In a lot of Barn Owl's pellets from the Murge plateau a specimen of <em>Sorex> sp. was detected. Thank to some morphological and morphometrical features, the cranial bones can be tentatively attributed to <em>Sorex samniticusem> Altobello, 1926. The genus <em>Sorex> was not yet included in the Apulia's fauna southwards of the Gargano district; the origin and significance of the above record is briefly discussed, the actual presence of a natural population of <em>Sorex> in the Murge being not yet proved. Riassunto Viene segnalato il rinvenimento di un esemplare di <em>Sorex> cfr. <em>samniticus> da borre di <em>Tyto albaem> delle Murge. Poiché il genere non era stato ancora segnalato nella Puglia a sud del Gargano, viene discusso il significato faunistico del reperto.

  2. Characterization of a red ceramic body used in the manufacture of ceramic bricks in the region of Campos dos Goytacazes, RJ, Brazil; Caracterizacao de massa ceramica vermelha utilizada na fabricacao de blocos ceramicos na regiao de Campos dos Goytacazes

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, L.L.P. de; Petrucci, L.J.T.; Pessanha, E.M.; Paixao, L.P.; Maia, F.S. [Faetec, Campos dos Goytacazes, RJ (Brazil). Centro Vocacional Tecnologico. Ceramica

    2010-07-01

    This work aims at the physical and mineralogical characterization of a ceramic body, used industrially in the manufacture of ceramic bricks in the region of Campos dos Goytacazes. The clay was characterized by chemical composition, X-ray diffraction, dilatometry, differential thermal analysis and gravimetric. We test specimens were obtained by extrusion. The bodies were burned from 750 to 1000 deg C and then it was determined water absorption, linear shrinkage, loss on ignition and modulus of rupture. The results showed that the ceramic body consists mainly of kaolinite, quartz and feldspar is thus suitable for mass production of ceramic bricks in accordance with technical standards. (author)

  3. Glycosylation of Vanillin and 8-Nordihydrocapsaicin by Cultured <em>Eucalyptus perrinianaem> Cells

    Directory of Open Access Journals (Sweden)

    Naoji Kubota

    2012-05-01

    Full Text Available Glycosylation of vanilloids such as vanillin and 8-nordihydrocapsaicin by cultured plant cells of <em>Eucalyptus perrinianaem> was studied. Vanillin was converted into vanillin 4-<em>O>-b-D-glucopyranoside, vanillyl alcohol, and 4-<em>O>-b-D-glucopyranosylvanillyl alcohol by <em>E. perriniana em>cells. Incubation of cultured <em>E. perrinianaem> cells with 8-nor- dihydrocapsaicin gave 8-nordihydrocapsaicin 4-<em>O>-b-D-glucopyranoside and 8-nordihydro- capsaicin 4-<em>O>-b-D-gentiobioside.

  4. Retratos em movimento.

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Oliveira Junior

    Full Text Available resumo O artigo aborda aspectos da relação do cinema com a arte do retrato. Buscamos, em primeiro lugar, uma definição estética do que seria um retrato cinematográfico, sempre em tensão com os critérios formais e padrões estilísticos que historicamente constituíram o retrato pictórico. Em seguida, relacionamos essa questão com a importância que se deu à representação do close-up de rosto nas primeiras décadas do cinema, quando foi atribuído aos filmes um papel inédito no estudo da fisionomia e da expressão facial. Por fim, apresentamos exemplos de autorretratos na pintura e no cinema para expor a forma como a autorrepresentação põe em crise as noções de subjetividade e identidade em que a definição clássica do retrato se apoiava.

  5. <em>In Vivoem> Histamine Optical Nanosensors

    Directory of Open Access Journals (Sweden)

    Heather A. Clark

    2012-08-01

    Full Text Available In this communication we discuss the development of ionophore based nanosensors for the detection and monitoring of histamine levels <em>in vivoem>. This approach is based on the use of an amine-reactive, broad spectrum ionophore which is capable of recognizing and binding to histamine. We pair this ionophore with our already established nanosensor platform, and demonstrate <em>in vitroem> and <em>in vivoem> monitoring of histamine levels. This approach enables capturing rapid kinetics of histamine after injection, which are more difficult to measure with standard approaches such as blood sampling, especially on small research models. The coupling together of <em>in vivoem> nanosensors with ionophores such as nonactin provide a way to generate nanosensors for novel targets without the difficult process of designing and synthesizing novel ionophores.

  6. Urban index modelling for forecasting of channeled natural gas market: an example in Sao Paulo metropolitan region; Modelagem de indicadores urbanos para previsao do mercado de gas natural canalizado: um exemplo na regiao metropolitana de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Massara, Vanessa Meloni; Faga, Murilo Tadeu Werneck; Udaeta, Miguel Edgar Morales [Universidade Sao Paulo (USP), SP (Brazil). Programa Interunidades de Pos Graduacao em Energia]. E-mail: vmassara@iee.usp.br; murfaga@iee.usp.br; udaeta@pea.usp.br

    2006-07-01

    This paper aims to present a systemic model for analysis of the expansion and grow up of the natural gas distribution pipeline in a city. This methodology integrates the understanding of the urban dynamics to the strategies of expansion in the natural gas distribution network, through the grouping of information such as family income, demographic density and construction area, percentage of land use, number of households as well as commercial, service and industrial establishments, number of real state as well as indicative information released by the Urban Plan of the city regarding the increments in the peripheral districts. Relating the gas consumption esteemed by each type of land occupation and the cost for expanding the gas distribution network, the model will indicate, for each neighborhood, the viability of implementing a gas network as well as the places with potential for growing density in the existing gas distribution system. The aim is to propose an integration of aspects of city dynamics and new energy source development, taking the advance of natural gas in Sao Paulo Metropolitan area as a specific case study. Through the analysis of highly industrialized, residential and commercial suburbs of the City of Sao Caetano do Sul, the importance of urban parameters in the decision making process for network expansion is identified. (author)

  7. Study of the <em>in Vitroem> Antiplasmodial, Antileishmanial and Antitrypanosomal Activities of Medicinal Plants from Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Nawal M. Al-Musayeib

    2012-09-01

    Full Text Available The present study investigated the <em>in vitroem> antiprotozoal activity of sixteen selected medicinal plants. Plant materials were extracted with methanol and screened <em>in vitroem> against erythrocytic schizonts of <em>Plasmodium falciparumem>, intracellular amastigotes of <em>Leishmania infantum em>and <em>Trypanosoma cruzi em>and free trypomastigotes of<em> T. bruceiem>. Cytotoxic activity was determined against MRC-5 cells to assess selectivity<em>. em>The criterion for activity was an IC50 < 10 µg/mL (4. Antiplasmodial activity was found in the<em> em>extracts of<em> em>>Prosopis julifloraem> and <em>Punica granatumem>. Antileishmanial activity<em> em>against <em>L. infantumem> was demonstrated in <em>Caralluma sinaicaem> and <em>Periploca aphylla.em> Amastigotes of<em> T. cruzi em>were affected by the methanol extract of<em> em>>Albizia lebbeckem>> em>pericarp, <em>Caralluma sinaicaem>,> Periploca aphylla em>and <em>Prosopius julifloraem>. Activity against<em> T. brucei em>was obtained in<em> em>>Prosopis julifloraem>. Cytotoxicity (MRC-5 IC50 < 10 µg/mL and hence non-specific activities were observed for<em> em>>Conocarpus lancifoliusem>.>

  8. Previsão e séries temporais para tomada de decisão empresarial em uma indústria moveleira da região de Criciúma–SC = A study of forecasting and time series for business decision making in a furniture industry in Criciúma-SC

    Directory of Open Access Journals (Sweden)

    Fernanda Cristina Barbosa Pereira Queiroz

    2012-07-01

    Full Text Available Uma previsão adequada deve dar suporte a uma decisão minimizadora de risco por parte dos tomadores de decisão, sendo essencial para o planejamento individual e organizacional de agentes econômicos. Neste sentido, o objetivo deste artigo é realizar um estudo sobre previsão e séries temporais para tomada de decisão empresarial em uma indústria moveleira da região de Criciúma–SC. A metodologia utilizada fundamenta-se na construção de modelos univariados de previsão de preços, com base em dados de séries temporais. O estudo é classificado como exploratório, bibliográfico e um estudo de caso com dados quantitativos. Há uma grande variedade de modelos aplicáveis a estudos desta natureza. Para fins desta pesquisa, optou-se por selecionar o método linear Holt e Holt-Winters e o modelo ARIMA (Auto Regressive Integrate Moving Average. Procurou-se, neste sentido, apresentar os diferentes modelos disponíveis na literatura, objetivando estimar a demanda por móveis para banheiro e projetar vendas futuras. Os resultados mostraram que o modelo ARIMA (Auto Regressive Integrate Moving Average não se mostrou eficiente no caso analisado, devido ao número pequeno de dados, o que impossibilitou uma análise da sazonalidade, sugerindo-se que a empresa utilize o método de Holt, a fim de estimar o número de produtos a ser vendido e que, à medida que os novos produtos sejam vendidos, os demais modelos sejam testados novamente, uma vez que a incorporação de novos dados irá permitir confirmar a existência ou não da sazonalidade. An adequate forecast should give support to minimize risk decisions by the decision makers, being essential for individual and organizational planning of economic agents. In this sense, the purpose of this paper is to conduct a study about forecast and time series for business decision-making in a furniture industry in the region of Criciúma, SC. The methodology was based on the construction of univariate models

  9. Cyberbullying em adolescentes brasileiros

    OpenAIRE

    Wendt, Guilherme Welter

    2012-01-01

    O cyberbullying é entendido como uma forma de comportamento agressivo que ocorre através dos meios eletrônicos de interação (computadores, celulares, sites de relacionamento virtual), sendo realizado de maneira intencional por uma pessoa ou grupo contra alguém em situação desigual de poder e, ainda, com dificuldade em se defender. Os estudos disponíveis até o presente momento destacam que o cyberbullying é um fator de risco para o desenvolvimento de sintomas de ansiedade, depressão, ideação s...

  10. Nietzsche em voga

    OpenAIRE

    Borromeu, Carlos

    2015-01-01

    Resumo:Texto publicado em 1941, na revista de orientação católica A Ordem, no Rio de Janeiro. Seu autor considera que Nietzsche teria negado a moral tradicional, concebendo em seu lugar outra, porém imoral e brutal. Acusa o filósofo, por fim, de ser responsável pela Guerra ora e curso na Europa. Abstract:Text published in 1941 in the Catholic orientation magazine, A Ordem, in Rio de Janeiro. The author believes that Nietzsche would have denied traditional morality, conceiving another in it...

  11. Quality study of the air at Sepetiba, Rio de Janeiro, Brazil, using Tillandsia usneoides L. (Bromeliaceae) as biomonitor; Estudo da qualidade do ar na regiao de Sepetiba usando Tillandsia usneoides L. (Bromeliaceae) como biomonitor

    Energy Technology Data Exchange (ETDEWEB)

    Pitassi, Gabriel Quadros; Julianelli, Olivia B.; Oliveira, Antonio Roberto Barboza de; Leite, Carlos Barros [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Zouain, Felipe; Cunha, Kenya Dias da, E-mail: kenya@ird.gov.b [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Carneiro, Luana; Medeiros, Geisa [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    This paper studies the utilization of the bromelia specie Tillandsia usneoides L. (Bromeliaceae) for characterization of the particle dispersion at urban and industrial regions. As a case study, a program will be developed for the monitoring the aerosols generated due to action of weather on the solid waste open sky stored and over the waste basin belonging to the INGA, located at Sepetiba bay. The identification of the stable metals will be done by the PIXE technique, and the radionuclides identification by alpha and gamma spectrometry. The preliminary results of aerosol samples collected at Ilha da Madeira region indicate the presence of particles containing Cd, V, K, Ca, Fe, Ti, Zn, Cu, Co and S. The variation in the percentage of each element at the points of collection suggests that there exist more than one aerosol source at the region

  12. Natural Products from Antarctic Colonial Ascidians of the Genera <em>Aplidium> and <em>Synoicum>: Variability and Defensive Role

    Directory of Open Access Journals (Sweden)

    Conxita Avila

    2012-08-01

    Full Text Available Ascidians have developed multiple defensive strategies mostly related to physical, nutritional or chemical properties of the tunic. One of such is chemical defense based on secondary metabolites. We analyzed a series of colonial Antarctic ascidians from deep-water collections belonging to the genera <em>Aplidium> and <em>Synoicum> to evaluate the incidence of organic deterrents and their variability. The ether fractions from 15 samples including specimens of the species <em>A.> <em>falklandicum>, <em>A.> <em>fuegiense>, <em>A.> <em>meridianum>, <em>A.> <em>millari> and <em>S.> <em>adareanum> were subjected to feeding assays towards two relevant sympatric predators: the starfish <em>Odontaster> <em>validus>, and the amphipod <em>Cheirimedon> <em>femoratus>. All samples revealed repellency. Nonetheless, some colonies concentrated defensive chemicals in internal body-regions rather than in the tunic. Four ascidian-derived meroterpenoids, rossinones B and the three derivatives 2,3-epoxy-rossinone B, 3-epi-rossinone B, 5,6-epoxy-rossinone B, and the indole alkaloids meridianins A–G, along with other minoritary meridianin compounds were isolated from several samples. Some purified metabolites were tested in feeding assays exhibiting potent unpalatabilities, thus revealing their role in predation avoidance. Ascidian extracts and purified compound-fractions were further assessed in antibacterial tests against a marine Antarctic bacterium. Only the meridianins showed inhibition activity, demonstrating a multifunctional defensive role. According to their occurrence in nature and within our colonial specimens, the possible origin of both types of metabolites is discussed.

  13. Remoção de macronutrientes de efluente da indústria de castanha de caju por uso de reator aeróbio em batelada com inóculo fúngico Removal of macronutrients from effluent of a cashew nut industry by using a batch aerobic reactor with fungal inoculums

    Directory of Open Access Journals (Sweden)

    Marina Santos da Silva Lopes

    2011-03-01

    Full Text Available Foi estudada a eficiência da remoção de nitrogênio e fósforo do efluente de indústria de castanha de caju, por uso de reator aeróbio em batelada com inóculo de Aspergillus niger AN400. O reator recebeu 5 L de água residuária, acrescida de glicose, na concentração de 1 g.L-1 (Etapa I e de 5 g.L-1 (Etapa II . Cada etapa teve seis ciclos operacionais, cada um com tempo de reação total de sete dias. Os valores de pH dos efluentes na Etapa I variaram de 6,4 a 8,7 e na Etapa II , de 3,1 a 7,0. Durante a Etapa II , o reator alcançou bons resultados para remoção de nutrientes sem acúmulo de sua concentração no meio: 49% de fósforo total, 60% de ortofosfato, 79% de amônia, 78% de nitrato e 90% de nitrito, indicando que a menor liberação de nutrientes pelos micro-organismos ocorreu na presença de concentração elevada de glicose.It was studied the removal efficiency of nitrogen and phosphorus from effluent of a cashew nut industry by using an aerobic reactor operated in repetitive batch, inoculated with Aspergillus niger AN400. The reactor was fed with 5 L of wastewater, supplemented with glucose in the concentration of 1 g.L-1 (Phase I and 5 g.L-1 (Phase II . Each phase had six operational cycles, with total reaction time of seven days per cycle. The pH values of the effluents in Phase I varied from 6.4 to 8.7 and in Phase II , it varied from 3.1 to 7.0. The reactor achieved good results of removal without nutrients accumulated in the medium, during Phase II : 49% to total phosphorus, 60% to orthophosphate, 79% to ammonia, 78% to nitrate, and 90% to nitrite, indicating that the lesser release of nutrients by microorganisms occurred in the presence of higher glucose concentration.

  14. Avaliação da madeira de Eucalyptus camaldulensis Dehnh e Eucalyptus urophylla S.T. Blake em ensaios de usinagem, visando à produção moveleira Evaluation of the woods of Eucalyptus camaldulensis Dehnh and Eucalyptus urophylla S.T. Blake During machining tests for use by the furniture industry

    Directory of Open Access Journals (Sweden)

    Maria Odete Alves de Souza

    2009-08-01

    Full Text Available Este estudo teve como objetivo avaliar a potencialidade de uso da madeira de clones de Eucalyptus urophylla S. T. Blake, de 6 e 8 anos, e Eucalyptus camaldulensis Dehnh, de 10 anos, no que tange aos processos de usinagem, visando ao seu uso na indústria de móveis. A madeira utilizada originou-se de plantios comerciais cultivados em sistema de consórcio agrossilvipastoril, proveniente da Votorantim Metais Zinco S/A, situada no Município de Vazante, no Estado de Minas Gerais. Utilizaram-se seis árvores por clone, totalizando 18 exemplares. Foram realizados os seguintes ensaios de usinagem: corte paralelo às fibras, corte transversal às fibras, fresagem, aplainamento, furação, furação para espiga, furação para cavilha e moldura. Os resultados mostraram-se satisfatórios, com destaque para o clone de Eucalyptus urophylla com 8 anos, principalmente nos ensaios de corte paralelo e furação para espiga, apresentando grande potencial de uso da espécie para produção de móveis. A madeira dos clones testados apresentou bom desempenho na realização dos ensaios de usinagem, no que se refere à trabalhabilidade, não havendo entraves na sua utilização como fonte de matéria-prima na indústria moveleira.The objective of this research was to conduct machining tests in woods of 6 and 8-year-old Eucalyptus urophylla and of a ten-year old Eucalyptus camaldulensis and to evaluate their possible use by the furniture industry. The wood samples were obtained from six trees of each clone, planted in a consortium with cattle and grain, owned by Votorantim Metals and Zinc. The plantation is located in the neighborhood of the city of Vazante, in the State of Minas Gerais. The following essays were conducted: cut by a table saw either parallel or perpendicular to the grain; shaping; planing; drilling; routing; mortising and drilling for dowels. All the samples yielded satisfactory results, mainly the eight year old Eucalyptus urophylla, during

  15. Avaliação e diagnóstico das condições de trabalho em duas indústrias de baterias chumbo-ácidas no Estado do Rio de Janeiro Evaluation and diagnosis of working conditions in two lead-acid batteries industries in the State of Rio de Janeiro

    Directory of Open Access Journals (Sweden)

    Ubirajara Aluizio de Oliveira Mattos

    2003-01-01

    Full Text Available A análise do processo produtivo e das condições de trabalho em fábricas de baterias chumbo-ácidas apresenta uma gama de informações mais completas do que as que têm sido discutidas até então. O presente estudo analisa o processo produtivo de duas indústrias de baterias no Rio de Janeiro. A metodologia utilizada aborda o assunto de uma forma qualitativa, utilizando como ferramentas entrevistas estruturadas com os trabalhadores e análise do ambiente de trabalho. O principal objetivo deste artigo é mostrar uma metodologia de análise com visão ambiental ressaltando os riscos inerentes a estas atividades com uso de mapas de riscos, através de sua construção nos ambientes estudados. Os resultados sugerem um conjunto de recomendações, baseadas na literatura científica e nas normas de segurança e medicina do trabalho explicitadas pela legislação brasileira.The analysis of the productive process and work conditions in companies of lead-acid batteries presents a range of more complete information than the ones that have been discussed for others companies up to now for its low technology profile. The present study analyzes the productive process of two industries of batteries in Rio de Janeiro. The used methodology approaches the subject in a qualitative point of view, using tools as: worker's structured interviews and analysis of the work conditions, under an environmental concept. Thus, the main objective of this paper is to present a methodology including environment concept on work conditions and point out the inherent risks of these activities by construction of risk's maps. The results has suggested some recommendations, based on scientific knowledge so as safety and occupational health norms, adopted in Brazilian Legislation. Besides that it is pointed out the absolute necessity of general discussion with laborers’ participation.

  16. Chemicals Industry Vision

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  17. Gap analysis of industrial energy management systems in Slovenia

    International Nuclear Information System (INIS)

    Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

    2016-01-01

    Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

  18. Green Biosynthesis of Silver Nanoparticles Using <em>Callicarpa maingayiem> Stem Bark Extraction

    Directory of Open Access Journals (Sweden)

    Mohammed Zidan

    2012-07-01

    Full Text Available Different biological methods are gaining recognition for the production of silver nanoparticles (Ag-NPs due to their multiple applications. The use of plants in the green synthesis of nanoparticles emerges as a cost effective and eco-friendly approach. In this study the green biosynthesis of silver nanoparticles using <em>Callicarpa maingayi em>stem bark extract has been reported. Characterizations of nanoparticles were done using different methods, which include; ultraviolet-visible spectroscopy (UV-Vis, powder X-ray diffraction (XRD, transmission electron microscopy (TEM, scanning electron microscopy (SEM, energy dispersive X-ray fluorescence (EDXF spectrometry, zeta potential measurements and Fourier transform infrared (FT-IR spectroscopy. UV-visible spectrum of the aqueous medium containing silver nanoparticles showed absorption peak at around 456 nm. The TEM study showed that mean diameter and standard deviation for the formation of silver nanoparticles were 12.40 ± 3.27 nm. The XRD study showed that the particles are crystalline in nature, with a face centered cubic (fcc structure. The most needed outcome of this work will be the development of value added products from <em>Callicarpa maingayi em>for biomedical and nanotechnology based industries.

  19. The EM technology development strategy

    International Nuclear Information System (INIS)

    Frank, C.W.; Barainca, M.; Kubo, A.S.

    1992-01-01

    The Office of Technology Development (TD) supports research and development of technologies that will lower cost, reduce risk, improve safety, and accelerate cleanup of the Nuclear Weapons Complex and provide solutions to currently untractable environmental problems. The TD strategic plan outlines Applied Research, Development, Demonstration, Testing, and Evaluation (RDDT and E) that will provide needed technology products to be used by Environmental Restoration and Waste Management operations (i.e., our customers). The TD strategic plan is derived from EM Goals, Objectives, and Strategy and is incorporated into DOE'S Five-Year Plan for Environmental Restoration and Waste Management. The TD strategic plan is developed based on integrating customer requirements, and is complemented by a top-down, bottom-up analysis of Site Specific Technology Needs and environmental problems. The execution of TD's strategic plan is implemented largely through Integrated Programs (IP) and Integrated Demonstrations (ID). IDs have proven to be a cost-effective method of managing technology development, testing and evaluation, and implementation of successful technology systems into the DOE Environmental Restoration and Waste Management Programs. The Savannah River ID for Volatile Organic Compounds (VOCs) in Saturated Soils resulted in a 51 percent cost savings over stand-alone demonstrations, saving over $8 million. The IPs and IDs are selected based on customer needs, technical complexity, and complex-wide regulatory and compliance agreements. New technology systems are selected for incorporation into an IP or ID from offerings of the DOE laboratories, industry, and the universities. A major TD initiative was announced in August 1991, with the release of a Program Research and Development Announcement (PRDA) requesting industry and universities to propose innovative new technologies to clean up the Weapons Complex. (author)

  20. Avaliação do desempenho logístico do transporte rodoviário de madeira utilizando rede de petri em uma empresa florestal de Minas Gerais Evalution of logistic performance of wood hauling using petri net in a forest industry of Minas Gerais

    Directory of Open Access Journals (Sweden)

    Raiane Ribeiro Machado

    2006-12-01

    Full Text Available Este trabalho teve por objetivo utilizar o modelo de avaliação do desempenho logístico de cadeias produtivas (ADELCAP centrado nos tempos dos elementos do ciclo operacional do transporte de madeira, visando otimizar os recursos, garantir um fluxo contínuo de abastecimento e assegurar um volume adequado de entrada de madeira na fábrica. O ciclo operacional de transporte de madeira é composto pelo carregamento de madeira no campo, viagem carregada, descarregamento, garagem e viagem vazia. Para tanto, utilizou-se como estudo de caso uma empresa produtora de celulose do Estado de Minas Gerais. Nesse modelo de cadeia logística de transporte de madeira, utilizou-se a Rede de Petri Temporal, por trabalhar com dois tempos que correspondem a uma duração de sensibilização. Criaram-se cenários com as mesmas variações nas duas regionais estudadas e realizaram-se simulações com os softwares JARP e ARP, a fim de avaliar o desempenho operacional e econômico. As variações aplicadas nos cenários foram: melhoria das estradas florestais; aumento do número de carregadores; e melhoria da eficiência da garagem. Em ambas as regionais, o cenário com as três variações (Cenário 7 apresentou a maior redução nos tempos dos ciclos de transporte de madeira em relação à situação atual, sendo 19,24 e 21,48%, respectivamente, para Rio Doce e Cocais das Estrelas. Considerando-se apenas como custo operacional o valor pago pelo frete, não estando incluso o custo referente a investimentos, tanto na regional do Rio Doce quanto em Cocais das Estrelas, ele apresentou maior redução no cenário 7 (20,09 e 21,22%, respectivamente.The present work aimed at using the model of logistic performance evaluation of productive chains (ADELCAP centered in the operational cycle time elements of wood transport, seeking to optimize the resources, to guarantee a continuous flow of supplying and to assure an appropriate volume of wood entrance in the industry. The

  1. The US DOE EM international program

    Energy Technology Data Exchange (ETDEWEB)

    Elmetti, Rosa R.; Han, Ana M. [U.S. Department of Energy, Washington, D.C. (United States); Roach, Jay A. [Nexergy Technical, LLC., Falls Church, Virginia (United States)

    2013-07-01

    The U.S. Department of Energy (DOE) Office of Environmental Management (EM) conducts international collaboration activities in support of U.S. policies and objectives regarding the accelerated risk reduction and remediation of environmental legacy of the nations' nuclear weapons program and government sponsored nuclear energy research. The EM International Program supported out of the EM Office of the Associate Principal Deputy Assistant Secretary pursues collaborations with foreign government organizations, educational institutions and private industry to assist in identifying technologies and promote international collaborations that leverage resources and link international experience and expertise. In fiscal year (FY) 2012, the International Program awarded eight international collaborative projects for work scope spanning waste processing, groundwater and soil remediation, deactivation and decommissioning (D and D) and nuclear materials disposition initiatives to seven foreign organizations. Additionally, the International Program's scope and collaboration opportunities were expanded to include technical as well as non-technical areas. This paper will present an overview of the on-going tasks awarded in FY 2012 and an update of upcoming international activities and opportunities for expansion into the remainder of FY 2013 and beyond. (authors)

  2. Clinical Relevance of <em>CDH1em> and <em>CDH13em> DNA-Methylation in Serum of Cervical Cancer Patients

    Directory of Open Access Journals (Sweden)

    Günther K. Bonn

    2012-07-01

    Full Text Available This study was designed to investigate the DNA-methylation status of <em>E>-cadherin (<em>CDH1em> and <em>H>-cadherin (<em>CDH13em> in serum samples of cervical cancer patients and control patients with no malignant diseases and to evaluate the clinical utility of these markers. DNA-methylation status of <em>CDH1em> and <em>CDH13em> was analyzed by means of MethyLight-technology in serum samples from 49 cervical cancer patients and 40 patients with diseases other than cancer. To compare this methylation analysis with another technique, we analyzed the samples with a denaturing high performance liquid chromatography (DHPLC PCR-method. The specificity and sensitivity of <em>CDH1em> DNA-methylation measured by MethyLight was 75% and 55%, and for <em>CDH13em> DNA-methylation 95% and 10%. We identified a specificity of 92.5% and a sensitivity of only 27% for the <em>CDH1em> DHPLC-PCR analysis. Multivariate analysis showed that serum <em>CDH1em> methylation-positive patients had a 7.8-fold risk for death (95% CI: 2.2–27.7; <em>p> = 0.001 and a 92.8-fold risk for relapse (95% CI: 3.9–2207.1; <em>p> = 0.005. We concluded that the serological detection of <em>CDH1em> and <em>CDH13em> DNA-hypermethylation is not an ideal diagnostic tool due to low diagnostic specificity and sensitivity. However, it was validated that <em>CDH1em> methylation analysis in serum samples may be of potential use as a prognostic marker for cervical cancer patients.

  3. Fumigant Antifungal Activity of Myrtaceae Essential Oils and Constituents from <em>Leptospermum petersoniiem> against Three <em>Aspergillus> Species

    Directory of Open Access Journals (Sweden)

    Il-Kwon Park

    2012-09-01

    Full Text Available Commercial plant essential oils obtained from 11 Myrtaceae plant species were tested for their fumigant antifungal activity against <em>Aspergillus ochraceusem>, <em>A. flavusem>, and <em>A. nigerem>. Essential oils extracted from<em> em>Leptospermum> <em>petersonii> at air concentrations of 56 × 10−3 mg/mL and 28 × 10−3 mg/mL completely inhibited the growth of the three <em>Aspergillus> species. However, at an air concentration of 14 × 10−3 mg/mL, inhibition rates of <em>L. petersoniiem> essential oils were reduced to 20.2% and 18.8% in the case of <em>A. flavusem> and <em>A. nigerem>, respectively. The other Myrtaceae essential oils (56 × 10−3 mg/mL only weakly inhibited the fungi or had no detectable affect. Gas chromatography-mass spectrometry analysis identified 16 compounds in <em>L. petersoniiem>> em>essential> em>oil.> em>The antifungal activity of the identified compounds was tested individually by using standard or synthesized compounds. Of these, neral and geranial inhibited growth by 100%, at an air concentration of 56 × 10−3 mg/mL, whereas the activity of citronellol was somewhat lover (80%. The other compounds exhibited only moderate or weak antifungal activity. The antifungal activities of blends of constituents identified in <em>L. petersoniiem> oil indicated that neral and geranial were the major contributors to the fumigant and antifungal activities.

  4. Monitoring of meteorology and air quality at influence area of COMPERJ (Rio de Janeiro Petrochemical Complex); Monitoramento meteorologico e da qualidade do ar na regiao de influencia do COMPERJ (Complexo Petroquimico do Rio de Janeiro)

    Energy Technology Data Exchange (ETDEWEB)

    Albuquerque, Edler Lins de; Villa, Felipe de Santana; Lyra, Diogenes Ganghis Pimentel de [CETREL-LUMINA Solucoes Ambientais, Salvador, BA (Brazil); Secron, Marcelo; Iorio, Patricia Freire; Mendes, Marcos Faistauer [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Rio de Janeiro Petrochemical Complex (COMPERJ) will be installed in the north region of Itaborai city. The start of COMPERJ operations is foreseen to 2012. Because of the intensification of industrialization and urbanization processes, the implantation of COMPERJ will bring environmental modifications for Itaborai city and neighbors areas. Thus, meteorological and air quality monitoring was initiated in February of 2007 with the intention of carrying out a characterization of air pollution in this area, before COMPERJ operations. In this work are presented the results found in campaigns performed of February of 2007 until April of 2008. The meteorological monitoring disclosed that the meteorological parameters have varied enough throughout the months, but these are representative of a global behavior of the studied area. Monitoring of air quality has shown that atmospheric levels of monitored pollutants has been generally below of Brazilian air quality standards. This fact corroborates the basic aspect of the present study: identification of the concentrations 'background' in the studied area. Throughout the period of monitoring, the primary air quality standard for ozone has been reached. Observations of meteorological parameters indicate that this fact is associated to the emissions originated from Sao Goncalo, Niteroi and Rio de Janeiro cities. (author)

  5. INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

    Directory of Open Access Journals (Sweden)

    Ahmad Kamil

    2015-10-01

    Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

  6. Assessment of Genetic Fidelity in <em>Rauvolfia em>s>erpentina em>Plantlets Grown from Synthetic (Encapsulated Seeds Following <em>in Vitroem> Storage at 4 °C

    Directory of Open Access Journals (Sweden)

    Mohammad Anis

    2012-05-01

    Full Text Available An efficient method was developed for plant regeneration and establishment from alginate encapsulated synthetic seeds of <em>Rauvolfia serpentinaem>. Synthetic seeds were produced using <em>in vitroem> proliferated microshoots upon complexation of 3% sodium alginate prepared in Llyod and McCown woody plant medium (WPM and 100 mM calcium chloride. Re-growth ability of encapsulated nodal segments was evaluated after storage at 4 °C for 0, 1, 2, 4, 6 and 8 weeks and compared with non-encapsulated buds. Effects of different media <em>viz>; Murashige and Skoog medium; Lloyd and McCown woody Plant medium, Gamborg’s B5 medium and Schenk and Hildebrandt medium was also investigated for conversion into plantlets. The maximum frequency of conversion into plantlets from encapsulated nodal segments stored at 4 °C for 4 weeks was achieved on woody plant medium supplement with 5.0 μM BA and 1.0 μM NAA. Rooting in plantlets was achieved in half-strength Murashige and Skoog liquid medium containing 0.5 μM indole-3-acetic acid (IAA on filter paper bridges. Plantlets obtained from stored synseeds were hardened, established successfully <em>ex vitroem> and were morphologically similar to each other as well as their mother plant. The genetic fidelity of <em>Rauvolfia em>clones raised from synthetic seeds following four weeks of storage at 4 °C were assessed by using random amplified polymorphic<em> em>DNA (RAPD and inter-simple sequence repeat<em> em>(ISSR markers. All the RAPD and ISSR profiles from generated plantlets were monomorphic and comparable<em> em>to the mother plant, which confirms the genetic<em> em>stability among the clones. This synseed protocol could be useful for establishing a particular system for conservation, short-term storage and production of genetically identical and stable plants before it is released for commercial purposes.

  7. The EM Earthquake Precursor

    Science.gov (United States)

    Jones, K. B., II; Saxton, P. T.

    2013-12-01

    Many attempts have been made to determine a sound forecasting method regarding earthquakes and warn the public in turn. Presently, the animal kingdom leads the precursor list alluding to a transmission related source. By applying the animal-based model to an electromagnetic (EM) wave model, various hypotheses were formed, but the most interesting one required the use of a magnetometer with a differing design and geometry. To date, numerous, high-end magnetometers have been in use in close proximity to fault zones for potential earthquake forecasting; however, something is still amiss. The problem still resides with what exactly is forecastable and the investigating direction of EM. After the 1989 Loma Prieta Earthquake, American earthquake investigators predetermined magnetometer use and a minimum earthquake magnitude necessary for EM detection. This action was set in motion, due to the extensive damage incurred and public outrage concerning earthquake forecasting; however, the magnetometers employed, grounded or buried, are completely subject to static and electric fields and have yet to correlate to an identifiable precursor. Secondly, there is neither a networked array for finding any epicentral locations, nor have there been any attempts to find even one. This methodology needs dismissal, because it is overly complicated, subject to continuous change, and provides no response time. As for the minimum magnitude threshold, which was set at M5, this is simply higher than what modern technological advances have gained. Detection can now be achieved at approximately M1, which greatly improves forecasting chances. A propagating precursor has now been detected in both the field and laboratory. Field antenna testing conducted outside the NE Texas town of Timpson in February, 2013, detected three strong EM sources along with numerous weaker signals. The antenna had mobility, and observations were noted for recurrence, duration, and frequency response. Next, two

  8. Classe social: conceitos e esquemas operacionais em pesquisa em saude

    Directory of Open Access Journals (Sweden)

    Rita Barradas Barata

    2013-08-01

    Full Text Available Discute-se a utilização do conceito de classe em pesquisas em saúde, as diferentes abordagens sociológicas de estratificação social e de estrutura de classes, o potencial explicativo do conceito em estudos de determinação social e desigualdades em saúde, os modelos de operacionalização elaborados para uso em pesquisas sociológicas, demográficas ou de saúde e os limites e possibilidades desses modelos. Foram destacados quatro modelos de operacionalização: de Singer para estudo da distribuição de renda no Brasil, adaptado por Barros para uso em pesquisas epidemiológicas; de Bronfman & Tuirán para o censo demográfico mexicano, adaptado por Lombardi et al para pesquisas epidemiológicas; de Goldthorpe para estudos socioeconômicos ingleses, adaptado pela Sociedade Espanhola de Epidemiologia; e o modelo de Wright para pesquisa em sociologia e ciência política, também usado em inquéritos populacionais em saúde. Em conclusão, conceitualmente cada um dos modelos apresentados é coerente com a concepção teórica que os embasam, mas não há como optar por qualquer deles, descartando os demais.

  9. Efecto de extractos vegetales de <em>Polygonum hydropiperoidesem>, <em>Solanum nigrumem> y <em>Calliandra pittieriem> sobre el gusano cogollero (<em>Spodoptera frugiperdaem>

    Directory of Open Access Journals (Sweden)

    Lizarazo H. Karol

    2008-12-01

    Full Text Available

    El gusano cogollero <em>Spodoptera frugiperdaem> es una de las plagas que más afectan los cultivos en la región de Sumapaz (Cundinamarca, Colombia. En la actualidad se controla principalmente aplicando productos de síntesis química, sin embargo la aplicación de extractos vegetales surge como una alternativa de menor impacto sobre el ambiente. Este control se emplea debido a que las plantas contienen metabolitos secundarios que pueden inhibir el desarrollo de los insectos. Por tal motivo, la presente investigación evaluó el efecto insecticida y antialimentario de extractos vegetales de barbasco <em>Polygonum hydropiperoidesem> (Polygonaceae, carbonero <em>Calliandra pittieriem> (Mimosaceae y hierba mora <em>Solanum nigrumem> (Solanaceae sobre larvas de <em>S. frugiperdaem> biotipo maíz. Se estableció una cría masiva del insecto en el laboratorio utilizando una dieta natural con hojas de maíz. Posteriormente se obtuvieron extractos vegetales utilizando solventes de alta polaridad (agua y etanol y media polaridad (diclorometano los cuales se aplicaron sobre las larvas de segundo instar. Los resultados más destacados se presentaron con extractos de <em>P. hydropiperoidesem>, obtenidos con diclorometano en sus diferentes dosis, con los cuales se alcanzó una mortalidad de 100% 12 días después de la aplicación y un efecto antialimentario representado por un consumo de follaje de maíz inferior al 4%, efectos similares a los del testigo comercial (Clorpiriphos.

  10. From a Music Industry to Sound Industries

    OpenAIRE

    Thor Magnusson

    2013-01-01

    Commodification has been an inherent aspect of music for many centuries. The aggregation of the diverse commodification practices could be described as an "industry," but this is an industry that has always been in a state of transition. New technologies, media formats, and practices appear regularly, requiring swift responses by the incumbent music industry. Although periods of relative stabil- ity have existed, where economic structures become established, the field has always been ch...

  11. Poesia em Revista: Oroboro

    Directory of Open Access Journals (Sweden)

    Helena Alves Gouveia

    2008-10-01

    Full Text Available http://dx.doi.org/10.5007/1984-784x.2008v8n12p38 A serpente que engole a si mesma é uma figura curiosa do simbolismo de um processo de contínua transformação, de um movimento circular incessante, rumo à infinitude, sem traços de fim ou começo. Oroboro é um nome de origem grega que remete a esta serpente que se morde e penetra em si mesma ao engolir o próprio rabo. Mas também é o nome da revista de cultura editada em Curitiba pelos artistas-editores Ricardo Corona e Eliana Borges.

  12. Hipervitaminose D em animais

    Directory of Open Access Journals (Sweden)

    Paulo V. Peixoto

    2012-07-01

    Full Text Available Por meio de revisão da literatura, são apresentados dados referentes ao metabolismo da vitamina D, bem como aos principais aspectos toxicológicos, clínicos, bioquímicos, macroscópicos, microscópicos, ultraestruturais, imuno-histoquímicos e radiográficos de animais intoxicados natural e experimentalmente por essa vitamina, em diferentes espécies. Este estudo objetiva demonstrar a existência de muitas lacunas no conhecimento sobre mineralização fisiológica e patológica, em especial na mediação hormonal do fenômeno, bem como alertar para os riscos de ocorrência dessa intoxicação.

  13. A democracia em Cuba

    OpenAIRE

    Zaldívar, Julio César Guanche

    2011-01-01

    O triunfo revolucionário de 1959 consagrou em Cuba um novo conceito de democracia, com o intuito de garantir o acesso à vida política ativa de grandes setores da população, antes excluídos. Para isso, foi desenvolvida uma política de inclusão social com caráter universal. A prática política popular deixou as riquezas do país em mãos da população carente e gerou uma grande mobilidade social, fato que foi central para o aumento da participação popular. O contexto de agressão imperialista e o pr...

  14. Tuberculose Infantil em Portugal

    OpenAIRE

    Carapau, João

    2014-01-01

    Dos números recentemente publicados pela Direcção Geral da Saúde / Núcleo de Tuberculose e Doenças Respiratórias relativos aos anos de 1992 e 1993 e pelo Instituto Nacional de Estatística relativos a 1994, conclui-se que os casos de Tuberculose (TB) notificados pouco têm decrescido nos últimos 15 anos: descida média anual de 6,3% para os casos em geral e 14% para os menores de 15 anos; a taxa global de incidência apurada em 1994 voltou a subir — 51,1 (52,4 no Continente). Para o autor a me...

  15. Petroleum industry of Korea seen from industry

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H.P. [SK Co, Seoul (Korea, Republic of)

    1998-05-01

    The domestic petroleum industry faced with outward opening and exchange crisis is put under the most difficult period so far, and costs reduction and securing international competitive power in software field are emerging as important assignments on which the life and death of national key industries depends not only as a restructuring issue of each petroleum company. Required strategy of petroleum industry to solve this effectively this year must be the thorough revamping through restructuring and reform of management standards not the survival exercise through price competition. For this, each petroleum company and distributor should open a new petroleum industry in which fair rules of the game are developed as well as costs reduction through joint efforts and value creation in overall industry. For this, government should support the domestic petroleum industry to stand up straight as a keeper of domestic energy industry by helping it to arm with international competitive power within a short period of time through overall needed system and legal scheme. It is because nobody can deny that energy industry is the key industry on which national existence is at stake.

  16. Universidade em ruinas?

    OpenAIRE

    Katuta, Ângela Massumi; UEL/CCE/Departamento de Geociências

    2010-01-01

    A Universidade, desde as suas origens no século XII, sempre esteve atrelada a instituições e setores hegemônicos da sociedade. Segundo Trindade (2000), a sua “invenção” ocorreu em plena Idade Média na Europa, sob a proteção da Igreja romana, sendo que as Universidades de Bolonha (1108) e Paris (1211) foram as primeiras a serem criadas 

  17. Avaliação do processo de tratamento biológico de águas residuárias sanitária e industrial em sistema combinado com reator biológico de contato seguido de filtro aerado submerso

    OpenAIRE

    Hércules Antonio de Oliveira

    2010-01-01

    Este estudo apresenta os resultados da operação de uma planta piloto de tratamento biológico para águas residuárias, em testes realizados em duas fases de estudo, sendo a primeira relacionada com a operação de um reator biológico de contato (RBC) e a segunda com a operação em sistema combinado, com um biofiltro aerado submerso (BAS) à jusante do RBC. As unidades RBC e BAS foram ensaiadas no tratamento de esgoto sanitário. A vazão média de alimentação foi de 82,9 Lh-1, e vazão de recirculação ...

  18. Rapid Development of Microsatellite Markers with 454 Pyrosequencing in a Vulnerable Fish<em>,> the Mottled Skate<em>, Raja em>pulchra>

    Directory of Open Access Journals (Sweden)

    Jung-Ha Kang

    2012-06-01

    Full Text Available The mottled skate, <em>Raja pulchraem>, is an economically valuable fish. However, due to a severe population decline, it is listed as a vulnerable species by the International Union for Conservation of Nature. To analyze its genetic structure and diversity, microsatellite markers were developed using 454 pyrosequencing. A total of 17,033 reads containing dinucleotide microsatellite repeat units (mean, 487 base pairs were identified from 453,549 reads. Among 32 loci containing more than nine repeat units, 20 primer sets (62% produced strong PCR products, of which 14 were polymorphic. In an analysis of 60 individuals from two <em>R. pulchra em>populations, the number of alleles per locus ranged from 1–10, and the mean allelic richness was 4.7. No linkage disequilibrium was found between any pair of loci, indicating that the markers were independent. The Hardy–Weinberg equilibrium test showed significant deviation in two of the 28 single-loci after sequential Bonferroni’s correction. Using 11 primer sets, cross-species amplification was demonstrated in nine related species from four families within two classes. Among the 11 loci amplified from three other <em>Rajidae> family species; three loci were polymorphic. A monomorphic locus was amplified in all three <em>Rajidae> family species and the <em>Dasyatidae> family. Two <em>Rajidae> polymorphic loci amplified monomorphic target DNAs in four species belonging to the Carcharhiniformes class, and another was polymorphic in two Carcharhiniformes species.

  19. Acarofauna em plantas ornamentais

    Directory of Open Access Journals (Sweden)

    Jania Claudia Camilo dos Santos

    2014-10-01

    Full Text Available Normal 0 21 false false false PT-BR X-NONE X-NONE O cultivo e o comercio de plantas ornamentais vem cada vez mais ganhando espaço no Brasil, pela grande variedade das espécies existentes e exuberância de suas flores, que oferecem uma maior riqueza ao local. Dessa forma, o objetivo desse trabalho foi realizar o levantamento da população de ácaros associados às plantas ornamentais no município de Arapiraca-AL, em função dos diversos problemas acarretados por essa espécie. O levantamento foi realizado entre os meses de abril a março, através de amostragens mensais de folhas coletadas da parte basal, intermediária e apical de plantas existentes em praças e jardins. Foram coletados 55 ácaros pertencentes à ordem Prostigmata em 20 famílias de plantas. As plantas com as maiores riquezas de ácaros foram as Coleus blumei L. e Bxuxus sempervirens L., que apresentaram 65% dos valores amostrais. Analisando-se as coletas realizadas, pode-se observar que houve uma maior incidência populacional de ácaros na coleta do mês de maio, cuja percentagem foi de 36% de ácaros levantados, sendo que no levantamento dos dados amostrais de março a percentagem encontrada foi de 14%, nas amostragens dos meses de abril e junho, a percentagem amostrada dos dados foi de 22 e 28%, respectivamente. O estudo do levantamento de ácaros em plantas ornamentais permitiu observar a relação entre ácaros e a relação com a planta hospedeira, facilitando posteriormente um estudo mais aprofundado sobre plantas hospedeiras, e pode-se observar que em períodos chuvosos ocorre uma menor incidência populacional.

  20. Industrial initiatives in the wind industry

    International Nuclear Information System (INIS)

    Edworthy, J.

    1992-01-01

    Industrial initiatives are methods of lobbying and marketing to increase the activity, revenues, profits, and commercial viability of an industry. They may be undertaken by industry individuals or firms, industry groups, government agencies, or combinations of all these. In Canada, one example of an industrial initiative is the Canadian Wind Energy Association. Other initiatives relevant to the wind power industry include Technology Inflow Programs sponsored by External Affairs Canada, used for visiting foreign firms with the view to licensing foreign technology, and Industrial Research Assistance Programs to develop or adapt new technologies in partnership with government. The Conservation/Renewable Energy Council, Small Power Producers of Alberta, and Independent Power Producers Society of Ontario are also active in supporting wind energy initiatives. In other countries, notable initiatives for wind energy include the Danish wind turbine warranty guarantee program. The Western Wind Industry Network of Canada conducts regional lobbying. It is suggested that in Canada, more such networks are needed, as well as joint ventures with utilities and governments, and more work with the regulatory agencies, to promote wind energy

  1. Industrial zones and Arab industrialization in Israel

    NARCIS (Netherlands)

    Sofer, Michael; Schnell, Izhak; Drori, Israel

    1996-01-01

    Since the 1970s there has been increased integration of the Arab sector into the Israeli economy. This integration has been characterized by the increase in industrial entrepreneurship in the Arab settlements. Critical to the industrialization process are factors related to the availability of

  2. Dutch industry, smart(est) industry

    NARCIS (Netherlands)

    Sol, E.J.; Steinbuch, M.; Keulen, F. van; Houten, F.J.A.M.; Horst, T.J.J. van der

    2015-01-01

    Digitalisering verandert onze samenleving. De combinatie van opkomende technologieën, zoals het Internet, micro-sensoren, 3D-printing en big data maakt volledig nieuwe producten en diensten mogelijk. In de industrie wordt niet voor niets gesproken over een vierde industriële revolutie. Het is voor

  3. Produção de Bipolaris euphorbiae em meios de cultura sólidos e líquidos obtidos de grãos e resíduos agroindustriais Production of Bipolaris euphorbiae in solid and liquid culture media obtained from grains and agricultural industry residues

    Directory of Open Access Journals (Sweden)

    Mara Cristina Penariol

    2008-12-01

    Full Text Available A introdução de Bipolaris euphorbiae como bioagente de controle de Euphorbia heterophylla é dependente da produção de conídios em grande quantidade. No presente trabalho, objetivou-se definir meios de cultura sólidos e líquidos, obtidos de grãos ou resíduos da agroindústria, eficazes para a produção de conídios de B. euphorbiae. No preparo dos meios sólidos utilizaram-se grãos de arroz, trigo e sorgo, quirelas de arroz, milho e trigo, sorgo moído, farelos de arroz, trigo e soja, cascas de mandioca e soja, casca de mandioca + farelo de soja, bagaço de cana e bagaço de cana + amido solúvel. No preparo dos meios líquidos, utilizaram-se grãos de arroz, sorgo e trigo, quirela de milho, farelos de trigo, soja e arroz, casca de mandioca e soja, vinhaça de cana e água de prensa da mandioca. Avaliaram-se a produção e a viabilidade dos conídios e a virulência do fungo e, nos meios líquidos, também a biomassa. A produção de conídios é influenciada pelo tipo de meio de cultura, sendo acentuadamente maior nos meios sólidos, destacando-se, como substratos, o sorgo em grão (474 x 10(6 conídios g-1 e a casca de soja (472 x 10(6 conídios g-1. Dentre os meios líquidos obteve-se mais produção usando-se farelo de trigo (1,33 x 10(6 conídios mL-1. A virulência e a viabilidade de B. euphorbiae não são afetadas pelo preparo de meios sólidos ou líquidos e pela composição nutricional dos meios de cultura. Na maioria dos meios sólidos ou líquidos obteve-se viabilidade de conídios maior que 98%; apenas os conídios produzidos nos meios sólidos de quirela de arroz, casca de mandioca + farelo de soja e farelo de soja estavam com viabilidade significativamente menor.The introduction of Bipolaris euphorbiae as a bioagent for Euphorbia heterophylla control depends on fungal conidia production in large amount. This work evaluate to solid and liquid culture media obtained from grains and residues from agriculture industries

  4. How <em>Varroa> Parasitism Affects the Immunological and Nutritional Status of the Honey Bee, <em>Apis melliferaem>

    Directory of Open Access Journals (Sweden)

    Katherine A. Aronstein

    2012-06-01

    Full Text Available We investigated the effect of the parasitic mite <em>Varroa destructorem> on the immunological and nutritional condition of honey bees, <em>Apis melliferaem>, from the perspective of the individual bee and the colony. Pupae, newly-emerged adults and foraging adults were sampled from honey bee colonies at one site in S. Texas, USA. <em>Varroa>‑infested bees displayed elevated titer of Deformed Wing Virus (DWV, suggestive of depressed capacity to limit viral replication. Expression of genes coding three anti-microbial peptides (<em>defensin1, abaecin, hymenoptaecinem> was either not significantly different between <em>Varroa>-infested and uninfested bees or was significantly elevated in <em>Varroa>-infested bees, varying with sampling date and bee developmental age. The effect of <em>Varroa> on nutritional indices of the bees was complex, with protein, triglyceride, glycogen and sugar levels strongly influenced by life-stage of the bee and individual colony. Protein content was depressed and free amino acid content elevated in <em>Varroa>-infested pupae, suggesting that protein synthesis, and consequently growth, may be limited in these insects. No simple relationship between the values of nutritional and immune-related indices was observed, and colony-scale effects were indicated by the reduced weight of pupae in colonies with high <em>Varroa> abundance, irrespective of whether the individual pupa bore <em>Varroa>.

  5. U-Pb zircon geochronology of intrusive and basement rocks in the Jacurici Valley region, Sao Francisco Craton, BA, Brazil; Geocronologia U-Pb em zircao de rochas intrusivas e de embasamento na regiao do Vale do Jacurici, Craton do Sao Francisco, BA

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Carlos Jose Sobrinho da; Frantz, Jose Carlos; Marques, Juliana Charao; Roos, Siegbert; Peixoto, Vinicius Medina, E-mail: silveira.carlosjose@hotmail.com, E-mail: jose.frantz@propesq.ufrgs.br, E-mail: juliana.marques@ufrgs.br, E-mail: sig_duda@yahoo.com.br, E-mail: vinimpeixoto@hotmail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Laboratorio de Geologia Isotopica; Queiroz, Waldemir Jose Alves de, E-mail: waldemirqueiroz@hotmail.com [Companhia de Ferro Ligas da Bahia (FERBASA), Pojuca, BA (Brazil)

    2015-09-15

    The Jacurici Complex, located in the NE of the Sao Francisco Craton, is constituted by several Cr-mineralized mafic-ultramafic N-S bodies, possible fragments of a single sill disrupted during deformation. Some works suggest it is intruded on the Serrinha Block while others consider it in the Salvador-Curaca Belt. The basement on this region is informally divided into paragneisses and orthogneisses; the latter is supposed to be younger considering it is less deformed. Petrography revealed that some of the paragneisses are alkali-feldspar granite strongly milonitized. The orthogneisses occur at the north and consist, at least in part, of monzogranites with heterogeneous deformation, locally of low temperature. U-Pb zircon dating were performed for five representative samples. Just three provided good concordia ages. A mafic rock produced a 2102 ± 5 Ma age and it is petrographically similar to the metanorites described in the Jacurici Complex, being interpreted as the record of the first pulses of the mafic magmatism. A monzogranite yielded a 2995 ± 15 Ma age, older than expected, related to the Serrinha Block. The alkali-feldspar granite yielded a 2081 ± 3 Ma age. The Itiuba Syenite and the pegmatites that crosscut the Jacurici Complex have similar ages. Considering the lack of information about the supracrustal sequence that hosts the intrusive alkaline and mafic-ultramafic rocks at the Ipueira and the Medrado areas, it is possible that part of the terrain belongs to the Salvador-Curaca Belt. We suggest that the Jacurici Complex could be intruded after the tectonic amalgamation between the Serrinha Block and the older part of the Salvador-Curaca Belt and, therefore, could be hosted by both terrains. (author)

  6. Determination of migration speed and the partition ratios of {sup 137} Cs in the soils of the future waste repository in Abadia de Goias, GO, Brazil; Determinacao da velocidade de migracao e das razoes de particao de {sup 137} Cs em solos da regiao do futuro repositorio de rejeitos de Abadia de Goias, GO

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Jose Carlos Alves

    1996-07-01

    The dispersion of a 51 TBq {sup 137} Cs source to the environment in Goiania city, has originated approximately 3500 m{sup 3} of radioactive waste. In order to segregate such waste in a definite form, a repository is being built in Abadia de Goias, GO near the site where it has been temporarily stored. This study had the following objectives: the determination of the {sup 137} Cs partition rate (K{sub D}) and the estimate of its migration velocity in soil samples from the site where the repository is being built. The determination of {sup 137} Cs K{sub D} was carried out by using two methods: 'batch method' and 'in-situ' method. In relation to the 'batch method'; 6 soil profiles cut into sections according to its pedologic horizons and 13 surface soil samples were collected, whereas for the 'in-situ' method 6 soil profiles with 28 cm depth were collected and each profile has been cut into 14 soil sections of a 1-3 cm range. Studies were carried out by using the 'batch method' to relate the influence from v/m and from shaking in K{sub D} determination and also studies about {sup 137} Cs adsorption reversibility in soil, time necessary for the equilibrium of {sup 137} Cs between water/soil phases to be reached and K{sub D} correlation with pedological parameters (pH values in water and clay, silt and organic material percent concentration, electrical conductivity of solution and the cation exchange - Ca{sup +2}, Mg {sup +2}, K{sup +2}, Na{sup +}, Al{sup +3}, H{sup +}). It has been noticed that in work conditions, K{sub D} has increased according to the rate increase v/m and the use of agitation in water/soil phases had no influence in K{sub D} determination. The absorbed {sup 137} Cs desorption process by water has shown to be slow but continued. Nevertheless, {sup 137} Cs cationic exchange for NH{sub 4}{sup +} has presented two steps: the first one very fast where approximately 50% of {sup 137} Cs adsorbed has been exchanged for NH{sub 4}{sup +} ions in just two days and the second one slow. Results indicate that {sup 137} Cs adsorption process in this kind of soil may be considered reversible. In using the 'batch method', it was noticed a higher {sup 137} Cs when increasing depth from soil profiles (108 - 897 cm{sup 3}.g{sup -1}). Nevertheless, {sup 137} Cs K{sub D} results point out to an average value of 430cm{sup 3}.g{sup -1}. This observation is confirmed when comparing to an average K{sub D} obtained by using 'batch method' and the K{sub D} value of 501 cm{sup 3}.g{sup -1} obtained by using 'in-situ' method. K{sub D} has just presented consistent linear correlation in relation to clay, [r=0,73]. Even though the type of clay found in the analyzed soils (caulinita) possess low adsorptive capacity, results have shown that as long as higher concentrations in clay in soil layers have been found, {sup 137} Cs K{sub D} has proportionally increased. Taking into consideration the hydrogeological medium conditions, {sup 137} Cs migration velocity found for a K{sub D} the average value obtained by using 'batch method' is 0,43 cm.year{sup -1}, whereas, for the 'in-situ' method was 0,37 cm.year{sup -1}. Assuming two meters as the minimum depth for ground water, {sup 137} Cs would take 460 - 500 years to reach it. (author)

  7. Comparative analysis of photovoltaic electric power storage systems by using batteries and hydrogen, at remote communities of the Amazon region; Analise comparativa de sistemas de armazenamento de energia eletrica fotovoltaica por meio de baterias e hidrogenio, em localidades isoladas da regiao Amazonica

    Energy Technology Data Exchange (ETDEWEB)

    Furlan, Andre Luis [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica; Neves Junior, Newton Pimenta [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin. Lab. de Hidrogenio]. E-mail: andrelf@fem.unicamp.br

    2008-07-01

    In this work, comparative analyses of photovoltaic power storage were made, first by the traditional means employing lead-acid batteries, and second by means of electrolytic hydrogen which was later reconverted to power in a fuel cell. In order to design the two systems, it was used a load profile of the communities in Amazon region and by means of a mathematical model, implemented in a spreadsheet, that considers the several devices and their efficiencies in order to make it possible to specify the system components. The results were employed to evaluate the economic viability of the two systems in remote communities. Considering the present conditions, it was verified that the battery system is slightly advantageous. However, it was also observed that a minor cost reduction of the electrolizers/buffer/fuel cell would make the hydrogen system very competitive, becoming the best option for photovoltaic power storage. (author)

  8. Analysis of the perception of risk of radiotherapy services in the metropolitan region of Rio de Janeiro using the risk evaluation system in radiotherapy (SEVRRA / FORUM); Analise da percepcao de risco de servicos de radioterapia da regiao metropolitana do Rio de Janeiro usando o sistema de avaliacao de risco em radioterapia (SEVRRA/FORO)

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Adam de Freitas

    2015-07-01

    In this work it was possible to analyze the perception of risks associated with existing processes in the high-dose rate brachytherapy and teletherapy using linear accelerators of radiotherapy services in the metropolitan area of Rio de Janeiro, through the combined use of two proposed methods: FMECA and risk matrix, using a general analysis and other more specific ones. The database software (SEVRRA) was used to identify possible existing processes in radiotherapy services (brachytherapy and teletherapy) and to classify the sequence of events in risk levels. The risk levels were analyzed at each stage and sub-stage, present in the treatment of patients undergoing high dose rate gynecological intracavitary brachytherapy and teletherapy treatments with the use of linear accelerators applying electron or photon beams in order to establish recommendations to the risks of highest priority for each case. The results show that although the procedure of high dose rate brachytherapy be automated and less susceptible to errors or failures, daily, one can still find considerable amounts of processes with worrying levels of risk perception. The processes that are more subject to radiological accident risks was associated with procedures, for of which the majority of the failures record and planning step of the treatment. The controls analyzed showed low efficiency, warning of the need to seek and implement new more efficient controls in routine brachytherapy for each participant service. About teletherapy procedure it was found that most of the failures were related to the registration and planning of treatment and equipment stages. The controls analyzed to teletherapy showed a poor result with a first type of analysis performed by suggesting a new type of more appropriate analysis. With a second type of analysis, these controls could be better analyzed and showed an order of importance according to a percentage of efficiency. Controls such as 'Double-check', 'Weekly image portal' and 'Weekly medical review of patients', were highlighted as the most present and effective in routine radiotherapy procedure. These results have great relevance for this type of methodology, since their practical application, together with its potential risk identification and classification, confirm their feasibility of use in routine services in the metropolitan area of Rio de Janeiro, as well as in other locations, seeking to meet national and international recommendations for safety and radiation protection. (author)

  9. Oil generation potential assessment and paleoenvironmental interpretation based on bio markers and stable carbon isotopes of the Pliensbachian - lower Toarcian (Lower Jurassic) of the Peniche region (Lusitanian Basin, Portugal); Avaliacao do potencial gerador de petroleo e interpretacao paleoambiental com base em biomarcadores e isotopos estaveis de carbono da secao Pliensbaquiano - Toarciano inferior (Jurassico Inferior) da regiao de Peniche (Bacia Lusitanica, Portugal)

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luiz Carlos Veiga de; Rodrigues, Rene; Duarte, Luis Vitor; Lemos, Valesca Brasil [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Bioestratigrafia e Paleoecologia]. E-mail: lcveiga@petrobras.com.br

    2006-05-15

    The Lusitanian Basin (Portugal) is located on the western margin of the Iberian Plate with maximum sedimentary thickness around 5 km. In spite of containing promising petroleum systems and more than a hundred wells, its hydrocarbon generation potential has not been fully evaluated yet. These sediments range from upper Triassic to upper Cretaceous, mainly from the Jurassic age. The Lower Jurassic is particularly well represented in the Lusitanian Basin, specifically in the Peniche region, where there are more than 450 m thick outcrops of carbonate rocks aged between Sinemurian and Toarcian. This study presents the evaluation of the hydrocarbon generation potential of the Pliensbachian . lower Toarcian of the Peniche section; which includes the Vale das Fontes Formation, Lemede Formation and Cabo Carvoeiro Formation (CC1 and CC2 members) based on 233 rock samples analyzed for total organic carbon (TOC), Rock-Eval pyrolysis and bio markers. Available data of oxygen and carbon stable isotopes were also used in the paleoenvironmental interpretation. Marls and limestones with the bituminous facies (Mlbf) of the Vale das Fontes Formation, present the highest TOC values, up to 14.95%, corresponding to the ibex (upper part), davoei and margaritatus ammonites zones and part of the NJ4a and NJ4b nanno fossils bio zones (Pliensbachian). In thermal immature sections (T max about 430 deg C), this member also shows high S{sub 2} values (10 to 50 mgHC/g rock) and Hydrogen index (HI: 200 to 555 mgHC/g TOC). The correlation between HI x OI shows that type II kerogen is predominant in the portion of the section where TOC values are higher. The good positive correlation between TOC values and the bio markers ratio P/nC17 and sterane (C{sub 27}/C{sub 29}) throughout the Mlbf Member suggests a gradual increase of anoxia and higher contribution of algae in relation to terrestrial organic matter. Usually {delta}{sup 18}O variations observed in the basins of the Iberian Peninsula have been explained by temperature changes. This work proposes an alternative interpretation, by correlating {delta}{sup 18}O alterations with data on bio markers to indicate salinity variations. Thus, the presence of gammacerane in the marls and limestones with Uptonia and Pentacrinus (Mlup) and lumpy marls and limestones (Lml), associated to the increase of {delta}{sup 18}O values would indicate an environment with salinity above normal levels. In addition to this, the increase of moretanes rates towards the maximum flooding (MF) interval - which is located in the {delta}{sup 13}C positive excursion in the upper part of the Mlbf Member - margaritatus ammonites zone and NJ4b nanno fossil bio zone - associated with the absence of gammacerane, suggests gradual salinity reduction. The presence of gammaceranes at the uppermost part of the Mlbf Member, with the moretanes rate reduction and the increase of Ts/Tm values seems to indicate a new cycle of increasing salinity.

  10. Ferrite re-crystallization kinetics on a C-Mn steel and on two micro alloyed steels after dual-phase strain; Cinetica de recristalizacao da ferrita em um aco C-Mn e dois acos microligados apos deformacao na regiao bifasica

    Energy Technology Data Exchange (ETDEWEB)

    Simieli, Eider A. [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)

    1991-12-31

    Ferrite recrystallization was investigated in two micro alloyed steels deformed in the inter critical range. A reference steel was also used, which had a composition of 0,06% C and 1,31% Mn. (author). 15 refs., 7 figs., 3 tabs.

  11. Evaluation of the activity concentration of {sup 226}Ra, {sup 228}Ra and {sup 210}Pb in sediments from Antarctica in the Admiralty bay region; Avaliacao da concentracao de atividade de Ra-226, Ra-228 e Pb-210 em sedimentos provenientes da Antartica na regiao da baia do Almirantado

    Energy Technology Data Exchange (ETDEWEB)

    Mora, Tamires de Araujo

    2015-07-01

    The natural radionuclides from radioactive series of {sup 238}U, {sup 235}U and {sup 232}Th have been applied as tracers in environmental studies for understanding the dynamics that occur in both marine and terrestrial environment, as for example, in research of oceanic processes and management of the coastal region. In the marine environment, these radionuclides can be used to estimate biogeochemical fluxes of marine particles and nutrients that occur in the water column as well as in the sediment. Several research works applied the distribution and the respective disequilibrium degree of natural radionuclides in the environment, including geochronological models for obtaining historical information on samples of certain sediment profile. In this study we performed a radiochemical characterization of the distribution of {sup 226}Ra, {sup 228}Ra and {sup 210}Pb from a sedimentary column called 1B (248 cm long) collected in the Admiralty Bay, Antarctic Peninsula region. The methodology used included the acid leaching of sediment samples followed by the radiochemical sequential separation of {sup 226}Ra and {sup 228}Ra by co-precipitation with Ba(Ra)SO{sub 4} and {sup 210}Pb by co-precipitation with PbCrO{sub 4}. All measurements were carried out by counting of gross alpha and gross beta measures in a low background gas flow proportional detector. The activity concentrations of {sup 226}Ra and {sup 210}Pb were used to estimate the unsupported {sup 210}Pb activities present in sediment profile 1 B. Based on unsupported {sup 210}Pb data and the application of the CIC model (Constant Initial Concentration), it was possible to determine the sedimentation rate of 0.59 ± 0.05 cm /year. (author)

  12. The provision of electricity through a photovoltaic-wind hybrid system in an isolated community in the Jalapao, municipality of Mateiros, state of Tocantins, Brazil; A disponibilizacao de energia eletrica atraves de um sistema hibrido eolico-fotovoltaico em uma comunidade isolada na regiao do Jalapao, municipio de Mateiros, estado do Tocantins

    Energy Technology Data Exchange (ETDEWEB)

    Zukowski Junior, J.C.; Santos, W.F.; Nobrega, S.L. de; Marcon, R.O. [Universidade Luterana do Brasil (CEULP/ULBRA), Palmas, TO (Brazil). Centro Universitario Luterano de Palmas. Curso de Engenharia Agricola], Emails: zukowski@uft.edu.br, olavo@ulbra-to.br, silvestre@ulbra-to.br

    2009-07-01

    Nowadays Brazil has many isolated communities. This isolation occurs mainly due to territorial conditions. Besides this aspect, the lack of structure produces another isolation, much more harmful, the social one. To promote social inclusion and sustainable development, some requirements are essential. Amongst all of them, the provision of electricity is the most prominent. This study aimed to provide electricity to an isolated community in the Jalapao region, Mateiros city, in the state of Tocantins. It was installed a hybrid aeolian-photovoltaic system, with capacity to produce 9676.80 kWh per year. This electricity system aims to improve the production process, so it was installed at the local community workshop. The results indicate that the system can be sustainable if the community makes use of the electricity generation, using it in the production process. (author)

  13. Influence of environmental impacts in the elaboration of a environmental control plan of a thermoelectric power plant at the isolated Brazilian electric system, in the Amazon region; A influencia dos impactos ambientais na elaboracao de um plano de controle ambiental em usina termoeletrica do sistema eletrico brasileiro isolado, na regiao Amazonica

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Helder Costa de [Guascor do Brasil Ltda., Sao Paulo, SP (Brazil)], e-mail: helder.sousa@globo.com; Almeida, Josimar Ribeiro de [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica. Dept. de Recursos Hidricos e Meio Ambiente], e-mail: josimar@poli.ufrj.br; Lins, Gustavo Aveiro [Secretaria Estadual de Educacao do Rio de Janeiro, RJ (Brazil); Companhia Estadual de Aguas e Esgotos (CEDAE), Rio de Janeiro, RJ (Brazil)], e-mail: gu.lins@terra.com.br

    2009-11-15

    This work identifies how are worked the leakages of liquids coming from the plant operation verifying the control of pollution level of the air resulting from the operation of the generator groups and the measurements taken for the mitigation of the observed noise levels and diagnosis of alternatives of the environmental management for the solid residues resulting from the material used in the operation and maintenance of the generator groups. (author)

  14. Mortality and cancer incident among residents in an area with a geological occurrence of uranium: the municipality of Monte Alegre, PA, Brazil; Avaliacao da incidencia e mortalidade por cancer na populacao residente em regiao com anomalia geologica na ocorrencia de uranio: estudo de caso: Monte Alegre, PA

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Leticia Rodrigues

    2009-04-15

    The municipality of Monte Alegre, located in the Amazonian State of Para, Brazil, presents scattered areas with increased levels of natural radiation due to uranium rocks. The objectives of this dissertation were: to evaluate the mortality trend among Monte Alegre residents, and to compare it with that observed in neighbor municipalities (Alenquer and Prainha) without natural radiation sources; and to determine the impact of cancer distribution either in Monte Alegre or control counties population, taking into account their estimates of cancer incidence and mortality. The dissertation was organized in two papers. The first one aimed to evaluate the mortality trend for all causes of death, cancer, and unknown causes of death occurred between 1981-2005. Analyzed data was provided by the Brazilian National Mortality Information System (SIM), being the general population of the State of Para used as reference. In the second paper, cancer mortality risks at selected sites were ascertained using standardized mortality ratios (SMR) and mortality odds ratios (MOR). Additionally, cancer mortality risk ratios of Monte Alegre and control counties were obtained towards the ratio between SMRs of selected cancer sites in both areas. Three different sources of data were used to retrieve all cancer cases in the studied area, and therefore, to estimate cancer incidence in the studied populations: the diagnosed cancer cases at the regional reference centers for oncological care settled in Santarem, Belem and Manaus; the cancer-related hospitalization authorization records obtained at the Brazilian National Health System (SUS) registries; and primary data of cancer reported by local residents at a population-based health survey conducted by our research team in 2007-2008. A declining trend for all causes of death mortality in Monte Alegre general population, as well as for the unknown causes of death, was observed along the studied time series for both gender. Cancer mortality trend in Monte Alegre and at the control counties remained stable, but the high proportion of unascertained causes of death at the mortality database does not allow a conclusive ascertainment. SMR for all causes of death in Monte Alegre was similar to that observed at the control counties, respectively, SMR=72.9, 95% CI 70,5-75,3 and SMR=75.2 , 95% CI 76,2-77,3. No excess of cancer deaths was observed in Monte Alegre or at the control populations, and cancer mortality by gender also did not reveal statistically significant differences at the different tumor sites. Despite the use of three different approaches to estimate cancer incidence in Monte Alegre and the control counties, similar patterns were observed in the studied areas. To conclude, no evidence supporting an increase of cancer deaths in Monte Alegre was observed. (author)

  15. Serum levels of triiodothyronine (T{sub 3}) and thyroxine (T{sub 4}) in buffalo (Bubalus bubalis Lin.) raised in Amazon region; Niveis sericos de triiodotironina (T{sub 3}) e tiroxina (T{sub 4}) em bubalinos (Bubalus bubalis Lin.) criados na regiao Amazonica

    Energy Technology Data Exchange (ETDEWEB)

    Silva, A O.A. da

    1991-08-01

    Through the use of radioimmunoassay (RIA) it was determined blood serum concentration of triiodothyronine (T{sub 3}) and thyroxine (T{sub 4}) (n=78) for two different water buffalo racial groups. Blood serum was collected from young and adult animals belonging to two farms in Castanhal country, state of Para, Brazil, through the year of 1988. The serum levels of T{sub 3} and T{sub 4} were statistically correlated with climatic parameters, e.g., pluviometric precipitation, environmental temperature, humidity, light intensity variation and physiological factors such as age, breed and sex. It was identified two seasons during experiment, one season the rainfall period with high precipitation rates and the other one was considered as dry season, with low precipitation rates. The average rate of temperature and humidity have shown no significant statistic difference between the two seasons. On the other hand, it was found a significant relationship between luminosity and seasons, since when the luminosity decreases the pluviometric rates increases. (author). 51 refs, 15 figs, 15 tabs.

  16. Gamma ray spectrometry and radon emissions in soils from the Piquiri Syenite Massif region (Encruzilhada do Sul e Cachoeira do Sul, RS); Espectrometria de raios gama e emissao de radonio em solos da regiao do Macico Sienitico Piquiri (Cachoeira do Sul e Encruzilhada do Sul, RS)

    Energy Technology Data Exchange (ETDEWEB)

    Romero-Mujalli, Gibran, E-mail: gibran.romero.mujalli@uni-hamburg.de [Institute for Geology, University of Hamburg (Germany); Roisenberg, Ari, E-mail: ari.roisenberg@ufrgs.br [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Instituto de Geociencias. Departamento de Mineralogia e Petrologia

    2016-05-15

    This study was focused in performing a gamma radiation survey and measurements of radon concentration in soils from the Piquiri Syenite Massif, an intrusion located at central area of the Rio Grande do Sul State. This intrusion has alkaline affiliation with high concentrations of uranium in accessory minerals as zircon, sphene, apatite, and others. The gamma radiation measurements were made considering a grid with squares about 2 km side each, using the gamma spectrometer RS-125, obtaining counts per second (cps), dose rate (DR) and concentrations of K, eU and eTh. Moreover, measurements of {sup 220}Rn and {sup 222}Rn in soil were made using the AlphaGUARD equipment. The counts per second values obtained in this study range from 130 to 1045, the dose rate from 28.9 nSv/h to 424.6 nSv/h, the K concentration from 0.5 % to 8.3 %, the eU concentration from 0.8 ppm to 25.8 ppm, and the eTh concentration from 3.0 ppm to 99.2 ppm. The distribution of K defines with relatively precision the lithological contacts of the Piquiri Syenite Massif and between the two main facies of the intrusion (Main and Marginal Facies). The Main Facies of the syenite contains the highest concentrations of eTh, while the highest concentrations of eU were measured in the north area of this facies. The {sup 220}Rn and {sup 222}Rn concentrations range from 10 kBq/m{sup 3} to 550 kBq/m{sup 3} and from 5 kBq/m{sup 3} to 400 kBq/m{sup 3}, respectively, in the Main and Marginal Facies. The high values of radon measured in Main Facies of the Piquiri Syenite Intrusion may indicate high potential risk to the health of inhabitants in the area. (author)

  17. Synthesis and Spectroscopic Analysis of Novel 1<em>H-Benzo[d>]imidazoles Phenyl Sulfonylpiperazines

    Directory of Open Access Journals (Sweden)

    Amjad M. Qandil

    2012-05-01

    Full Text Available A group of benzimidazole analogs of sildenafil, 3-benzimidazolyl-4-methoxy-phenylsulfonylpiperazines 2–4 and 3-benzimidazolyl-4-methoxy-<em>N,N>-dimethyl- benzenesulfonamide (5, were efficiently synthesized. Compounds 2–5 were characterized by NMR and MS and contrary to the reported mass spectra of sildenafil, the spectra of the piperazine-containing compounds 2–4 showed a novel fragmentation pattern leading to an <em>m/z> = 316. A mechanism for the formation of this fragment was proposed.

  18. Anestesia Diploica em Endodontia

    OpenAIRE

    Macedo, Ricardo Ribeiro Veiga de

    2013-01-01

    Trabalho final do 5º ano com vista à atribuição do grau de mestre no âmbito do ciclo de estudos de Mestrado Integrado em Medicina Dentária apresentado à Faculdade de Medicina da Universidade de Coimbra. Objetivos Comparar a eficácia das técnicas de anestesia convencionais, a anestesia infiltrativa periapical, com a anestesia diploica. Metodologia Foram selecionados 32 voluntários, saudáveis, aos quais foram administradas ambas as técnicas anestésicas no dente 1.4. Numa primeira fase os...

  19. Burnout em Cuidadores Formais

    OpenAIRE

    Silva, Juliana Marisa Fernandes

    2016-01-01

    Dissertação apresentada à Universidade Fernando Pessoa como parte dos requisitos para a obtenção do grau de Mestre em Psicologia, ramo de Psicologia Clínica e da Saúde Este estudo é sobre a Síndrome de Burnout e teve como objetivo geral compreender se o Burnout está presente nos cuidadores formais da Santa Casa da Misericórdia de Castelo de Paiva e quais as variáveis socioprofissionais que poderão exercer influência no seu aparecimento. Pretendeu-se avaliar o Burnout dos cuidadores a tr...

  20. Antioxidant Profile of <em>Trifolium pratenseem> L.

    Directory of Open Access Journals (Sweden)

    Heidy Schwartsova

    2012-09-01

    Full Text Available In order to examine the antioxidant properties of five different extracts of <em>Trifolium pratenseem> L. (Leguminosae leaves, various assays which measure free radical scavenging ability were carried out: 1,1-diphenyl-2-picrylhydrazyl, hydroxyl, superoxide anion and nitric oxide radical scavenger capacity tests and lipid peroxidation assay. In all of the tests, only the H2O and (to some extent the EtOAc extracts showed a potent antioxidant effect compared with BHT and BHA, well-known synthetic antioxidants. In addition, <em>in vivo em>experiments were conducted with antioxidant systems (activities of GSHPx, GSHR, Px, CAT, XOD, GSH content and intensity of LPx in liver homogenate and blood of mice after their treatment with extracts of <em>T. pratenseem> leaves, or in combination with CCl4. Besides, in the extracts examined the total phenolic and flavonoid amounts were also determined, together with presence of the selected flavonoids: quercetin, luteolin, apigenin, naringenin and kaempferol, which were studied using a HPLC-DAD technique. HPLC-DAD analysis showed a noticeable content of natural products according to which the examined <em>Trifolium pratenseem> species could well be regarded as a promising new source of bioactive natural compounds, which can be used both as a food supplement and a remedy.

  1. The Industry That Can.

    Science.gov (United States)

    Aguirre, Edward

    This speech by the U.S. Commissioner of Education reviews the education industry and education-industry relations. Examples illustrate the effective partnership that can be created to fashion and achieve successful vocational and career education programs. (MML)

  2. An Industrial Physics Toolkit

    Science.gov (United States)

    Cummings, Bill

    2004-03-01

    Physicists possess many skills highly valued in industrial companies. However, with the exception of a decreasing number of positions in long range research at large companies, job openings in industry rarely say "Physicist Required." One key to a successful industrial career is to know what subset of your physics skills is most highly valued by a given industry and to continue to build these skills while working. This combination of skills from both academic and industrial experience becomes your "Industrial Physics Toolkit" and is a transferable resource when you change positions or companies. This presentation will describe how one builds and sells your own "Industrial Physics Toolkit" using concrete examples from the speaker's industrial experience.

  3. Electronics Industry Study Report

    National Research Council Canada - National Science Library

    Belt, David; Fellows, John R; Kameru, Philip; Nazaroff, Boris-Frank A; Pauroso, Anthony; Schulz, Frederick; Ballew, Bob; Bond, Thomas; Demers, Stephy; Kirkpatrick, Steve

    2005-01-01

    This paper provides a national strategy for the US electronics industry. Electronics is one of the largest industries in the US and plays a critical role in almost every aspect of national security...

  4. Localisation for industrial development

    CSIR Research Space (South Africa)

    Bhugwandin, Ashley

    2017-10-01

    Full Text Available This presentation focuses on localisation for industrial development, and is presented by Ashley Bhugwandin at The 6th CSIR Conference: Ideas that work for industrial development, 5-6 October 2017, CSIR International Convention Centre, Pretoria...

  5. Proximate Composition, Nutritional Attributes and Mineral Composition of <em>Peperomia> <em>pellucida> L. (Ketumpangan Air Grown in Malaysia

    Directory of Open Access Journals (Sweden)

    Maznah Ismail

    2012-09-01

    Full Text Available This study presents the proximate and mineral composition of <em>Peperomia> <em>pellucida> L., an underexploited weed plant in Malaysia. Proximate analysis was performed using standard AOAC methods and mineral contents were determined using atomic absorption spectrometry. The results indicated <em>Peperomia> <em>pellucida> to be rich in crude protein, carbohydrate and total ash contents. The high amount of total ash (31.22% suggests a high-value mineral composition comprising potassium, calcium and iron as the main elements. The present study inferred that <em>Peperomia> <em>pellucida> would serve as a good source of protein and energy as well as micronutrients in the form of a leafy vegetable for human consumption.

  6. Conditions for industrial production

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Brauer, H.

    1996-01-01

    The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated.......The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated....

  7. Industry recession to persist

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the depressed U.S. oil and gas industry is not likely to recover soon, witnesses told the Texas Railroad Commission's state of the petroleum industry hearing. Major companies and independent operators agreed the U.S. petroleum industry is near a state of collapse. Many the producers are despairing about the chances of surviving the latest economic downturn

  8. FOSSIL FUEL INDUSTRIES

    Science.gov (United States)

    The chapter focuses on methane emissions from the coal and natural gas industries. The petroleum industry is not addressed because of the lack of related quality data. Emission points are identified for each industry, and a discussion of factors affecting emissions is presented. ...

  9. Benchmarking and industry performance

    NARCIS (Netherlands)

    Ten Raa, T.

    2011-01-01

    In this paper I interrelate productivity analysis and the theory of industrial organization. A proposition proves that an industrial organization is efficient if and only if it is supportable in the entry-proofness sense. Industrial performance is decomposed in efficiency and technical change terms

  10. Robotics and Industrial Arts.

    Science.gov (United States)

    Edmison, Glenn A.; And Others

    Robots are becoming increasingly common in American industry. By l990, they will revolutionize the way industry functions, replacing hundreds of workers and doing hot, dirty jobs better and more quickly than the workers could have done them. Robotics should be taught in high school industrial arts programs as a major curriculum component. The…

  11. Spring 2008 Industry Study: Financial Services Industry

    National Research Council Canada - National Science Library

    Calderon, Juan; Collins, Thomas W; Devinney, Edward; Driggers, Gene J; Dunmyer, Valrica; Flood, Paul; Gallant, Robin; Kekauoha, Stanford K; Krawietz, Anthony B; Kumashiro, Patrick T; LaDue, Paul W; LaFalce, John; Larson, Steven W; Lawrence, Steven J; Nettleton, John; Ostrowski, John A

    2008-01-01

    The extensive media coverage of the 2008 subprime crisis, both domestically and abroad, drives home the crucial role that the financial services industry plays for not only individual Americans, but for U.S. national security...

  12. O insight em psiquiatria

    Directory of Open Access Journals (Sweden)

    Ana Margarida P. Cardoso

    2008-12-01

    Full Text Available O sinal de que algo está a acontecer contribui para que o paciente reconheça que alguma coisa de estranho se está a passar consigo. Este reconhecimento faz com que o sujeito possa desempenhar uma função activa e seja um elemento colaborante do seu processo de recuperação. Cada doença apresenta, contudo, diferentes sintomas, uma vez que cada doença psiquiátrica consiste em diferentes perturbações com diversos efeitos sobre o funcionamento mental. Desta maneira, o fenómeno do insight que é registado em cada doença é diferente e expressa-se sob diferentes formas, não somente devido às manifestações clínicas da doença mas também devido às características individuais do sujeito.

  13. Antibioticos profilaticos em neurocirurgia

    Directory of Open Access Journals (Sweden)

    Reynaldo A. Brandt

    1979-03-01

    Full Text Available O índice de infecções pós-operatórias em pacientes neuro-cirúrgicos que receberam antibióticos profiláticos neste período foi comparado com o de pacientes que não receberam antibióticos. Infecções ocorreram em proporções significativamente maiores nos pacientes que receberam antibióticos, particularmente naqueles com afecções intracranianas graves; estas infecções foram graves e fatais na maioria dos casos. A administração de antibióticos profiláticos nestes pacientes não só foi incapaz de prevenir o aparecimento de infecções pós-operatórias, como aparentemente favoreceu o seu desenvolvimento. Tal se deveu, provavelmente, à destruição do equilíbrio microbiano no organismo, favorecendo o desenvolvimento de germes patogênicos e resistentes aos antibióticos usuais

  14. INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

    OpenAIRE

    Ahmad Kamil

    2015-01-01

    In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration...

  15. A democracia em Cuba

    Directory of Open Access Journals (Sweden)

    Julio César Guanche Zaldívar

    2011-01-01

    Full Text Available O triunfo revolucionário de 1959 consagrou em Cuba um novo conceito de democracia, com o intuito de garantir o acesso à vida política ativa de grandes setores da população, antes excluídos. Para isso, foi desenvolvida uma política de inclusão social com caráter universal. A prática política popular deixou as riquezas do país em mãos da população carente e gerou uma grande mobilidade social, fato que foi central para o aumento da participação popular. O contexto de agressão imperialista e o próprio desenvolvimento do processo produziram a consolidação de noções que limitaram a participação popular: o apogeu da burocracia, a compreensão da unidade como unanimidade e o seguimento, em certa medida, de correntes do marxismo soviético. Os desafios atuais para aprofundar a democracia em Cuba se apresentam em três planos: socializar o poder, promover a sociodiversidade e desenvolver a ideologia revolucionária.El triunfo revolucionario de 1959 consagró en Cuba un nuevo concepto de democracia, basado en garantizar acceso a la vida política activa a grandes sectores poblacionales, antes excluidos de ella. Para ello desarrolló una política de inclusión social con carácter universal. La práctica política popular puso las riquezas del país en manos de los desposeídos y generó gran movilidad social, hecho que resultó clave para el aumento de la participación popular. El contexto de agresión imperialista y el propio desarrollo del proceso produjo el afianzamiento de nociones que limitaron la participación popular: el auge de la burocracia, la comprensión de la unidad como unanimidad y el seguimiento, en parte, de corrientes del marxismo soviético. Los desafíos actuales se presentan en tres planos para profundizar la democracia en Cuba: socializar el poder, promover la sociodiversidad y desarrollar la ideología revolucionaria.The revolutionary triumph of 1959 established in Cuba a new concept of democracy, one that

  16. Importance of foreign investors for Russian power industry in prospect of energy revolution

    OpenAIRE

    Yaroslava N. Zubkova

    2017-01-01

    The article discusses current state of Russian electric power industry and the main problems of its development in the future of global energy revolution, which will lead to a significant increase in share of renewable energy in global production and consumption of energy and use of industrial energy storage, and will make it possible to change the structure of the industry and significantly reduce electricity prices. Traditional energy generation displacement by renewables associated with em...

  17. Minerals industry survey, 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    This is the seventh edition of the statistical survey commissioned by the Australian Mining Industry Council. It represents the most comprehensive review of the financial position of the Australian minerals industry and provides timely financial data on the minerals industry. The tables of this survey have been prepared for AMIC by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies. For the purpose of the survey, the minerals industry has been defined as including exploration for, and extraction and primary processing of, minerals in Australia. The oil and gas industry is not included.

  18. Minerals industry survey 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    This is the eleventh Minerals Industry Survey produced by the Australian Mining Industry Council. It represents an invaluable time series on the minerals industry's financial performance, as well as an up to date description of the industry for the latest financial year. The survey has been conceived as a supplement to and expansion of the various Australian Bureau of Statistics and Bureau of Mineral Resources, Geology and Geophysics publications which describe the exploration, mining and smelting and refining industries in Australia. The tables in this survey have been prepared by Coopers and Lybrand, Chartered Accountants, based on information supplied to them in confidence by the respondent companies.

  19. Historicism and Industry Emergence

    DEFF Research Database (Denmark)

    Kirsch, David; Moeen, Mahka; Wadhwani, Dan

    2014-01-01

    Management and organization scholars have increasingly turned to historical sources to examine the emergence and evolution of industries over time. This scholarship has typically used historical evidence as observations for testing theoretically relevant processes of industry emergence....... In this chapter, an alternative approach is explored that focuses on reconstructing causes and processes that time and theory have erased. The emergence of three industries—plant biotechnology, savings banking, and the automobile—shows how time, along with prevailing functional models of industry evolution, leads...... excluded phenomena and explanations, reconstructing uncertainty and alternative paths of industry emergence, and studying the processes of information elision and exclusion in the formation of industry knowledge....

  20. Industrial statistics with Minitab

    CERN Document Server

    Cintas, Pere Grima; Llabres, Xavier Tort-Martorell

    2012-01-01

    Industrial Statistics with MINITAB demonstrates the use of MINITAB as a tool for performing statistical analysis in an industrial context. This book covers introductory industrial statistics, exploring the most commonly used techniques alongside those that serve to give an overview of more complex issues. A plethora of examples in MINITAB are featured along with case studies for each of the statistical techniques presented. Industrial Statistics with MINITAB: Provides comprehensive coverage of user-friendly practical guidance to the essential statistical methods applied in industry.Explores

  1. Advanced Industrial Materials Program

    Science.gov (United States)

    Stooksbury, F.

    1994-06-01

    The mission of the Advanced Industrial Materials (AIM) program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDA's. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

  2. Metalcasting Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1998-01-01

    The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap outlines key goals for products and markets, materials technology, manufacturing technology, environmental technology, human resources, and industry health programs. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry. The Roadmap sets out the strategy for pursuing near-, mid-, and long-term goals set out by industry and for carrying out the cooperative agreement between the U.S. Department of Energy and industry.

  3. Regulação dos setores em rede para além dos valores econômicos: uma análise das políticas de interconexão IP para suporte a serviços de voz na União Europeia a partir das Teorias do Interesse Público / Regulating Network Industries beyond Economic Theories: An Analysis of IP Interconnection Policies to Support Voice Services in the EU from the perspective of Public Interest Theories

    Directory of Open Access Journals (Sweden)

    Victor Oliveira Fernandes

    2017-04-01

    Full Text Available Resumo Propósito – O artigo analisa de que forma teorias de regulação econômica dos setores em rede podem antecipar o comportamento das autoridades reguladoras no setor de telecomunicações contemporâneo, especificamente no que concerne à adoção de políticas de acesso e interconexão de redes. Metodologia/abordagem/design – Inicialmente, o trabalho examina os principais argumentos econômicos de regulação de setores em rede sustentados pela literatura especializada, destacando estudos recentes que consideram que o dinamismo tecnológico inerente ao setor de telecomunicações tornaria desnecessária uma intervenção estatal mais efetiva na imposição de obrigações de interconexão de redes. Em seguida, são exploradas algumas das críticas feitas pelas Teorias do Interesse Público às abordagens regulatórias baseadas exclusivamente na perseguição de valores econômicos, destacando-se de que forma tais críticas podem ser endereçadas às teorias examinadas na primeira parte do trabalho. Por fim, será examinado o quadro normativo comum europeu aplicável às políticas de acesso e interconexões de redes, bem como decisões recentes de Agências Reguladoras Nacionais de dois países da União Europeia (França e Alemanha, investigando-se como as abordagens econômicas de regulação dos setores em rede podem antecipar o comportamento dessas entidades reguladoras. Resultados – A partir das decisões examinadas, é possível inferir que, nessas jurisdições, a imposição de obrigações de interconexão IP fundamenta-se em princípios como o da concorrência efetiva e o da neutralidade tecnológica, que não se reduzem ao ideal econômico neoclássico de eficiência alocativa. Assim, nesse contexto, pode-se dizer que a intervenção regulatória perseguiu objetivos substantivos de regulação para além dos valores econômicos invocados pelas tradicionais teorias de regulação dos setores em rede. Abstract Purpose

  4. Osteoporose em caprinos

    Directory of Open Access Journals (Sweden)

    Fábio B. Rosa

    2013-04-01

    Full Text Available Foi realizado um estudo de casos de osteoporose em caprinos provenientes de uma propriedade na área de abrangência do LPV-UFSM, determinando a epidemiologia, o quadro clínico-patológico e discutindo os prováveis mecanismos patogenéticos. Cinco cabras, fêmeas, SRD, de seis meses a seis anos de idade foram afetadas. As cabras eram mantidas em campo nativo, sem suplementação com ração e sob superlotação. Os principais sinais clínicos foram emagrecimento, dificuldade de locomoção e permanência em decúbito por longos períodos. As principais alterações macroscópicas nos ossos examinados foram vistas nas superfícies de corte e caracterizavam-se por depleção do osso esponjoso (porosidade e redução acentuada da espessura do osso cortical. Havia também marcada atrofia serosa da gordura da medula óssea. Microscopicamente, nas regiões avaliadas (úmero proximal, rádio distal, fêmur distal, tíbia proximal e corpos das vértebras lombares foi observada redução moderada a acentuada do número e da espessura das trabéculas ósseas nas epífises e metáfises dos ossos longos e nos corpos vertebrais. Os achados clínico-patológicos indicaram que a osteoporose observada provavelmente foi causada pela desnutrição. As alterações ósseas (diminuição no número e na espessura das trabéculas do osso esponjoso sugerem que ambos os mecanismos, má formação óssea e reabsorção óssea aumentada, contribuíram para a ocorrência de osteoporose nos caprinos deste estudo.

  5. Influência do tempo de detenção hidráulica em um sistema UASB seguido de um reator biológico com fungos para tratar efluentes de indústria de castanha de caju Influence of the time of detention hidraulic of a sistem UASB followed by a biological reactor with fungi to treat efluent of cashew nut industry

    Directory of Open Access Journals (Sweden)

    Emília Maria Alves Santos

    2006-03-01

    Full Text Available Nesta pesquisa, estudou-se a influência do tempo de detenção hidráulica (TDH em um sistema constituído de um reator anaeróbio tipo UASB seguido de um reator biológico com fungos (RBF para tratar efluente de uma indústria de beneficiamento de castanha de caju. O presente trabalho foi dividido em uma fase de fluxo descontínuo (batelada e uma fase de fluxo contínuo (UASB - RBF, que constituiu-se de sete etapas ( 8h e 2h, 8h e 1h, 4h e 8h, 4h e 6h, 4h e 4h, 4h e 2h e 4h e 1h, onde foi avaliada a influência do TDH na remoção de: DQO (Demanda Química de Oxigênio, amônia, nitrato e ortofosfato. Uma combinação que apresentou melhores resultados, foi a etapa de 4h (TDH do reator UASB e 2h (TDH do RBF, apresentando remoções de: 93,8% de DQO, 86,7% de nitrato, 38,3% de amônia e 16% de ortofosfato.In this research, it was studied the effect of hydraulic retention time (HRT in a system comprised of an Upflow Anaerobic Sludge Blanket (UASB reactor and a Biological Reactor with Fungi (BRF for treatment of the efluent of the industry of cashew nut improvement. The work was divided in two phases: batch reactors using shaking flasks and continuous-feed reactors (UASB-BRF. The UASB reactor was operated at HRT of 4 and 8 h, whereas the BRF was operated at HRT varying from 1 to 8 h. The performance of both reactors was evaluated based on the removal efficiency of chemical oxygen demand (COD, ammonium, nitrate, and orthophosfate. The results show that the best results were achieved when the UASB was operated at HRT of 4 h and the BRF was operated at HRT of 2 h, when the system removed 93,8% of the COD, 86,7% of the nitrate, 38,3% of the ammonium and 16% of the orthophosfate.

  6. Proposta de um modelo de identificação da inovação tecnológica para a utilização de incentivos fiscais: um estudo em uma indústria de eletroeletrônicos sul brasileira = A Proposal of a Technological Innovation of Identification Model to use Tax Breaks: a case study in an eletronics industry in the south of Brazil

    Directory of Open Access Journals (Sweden)

    Dalci Mendes Almeida

    2016-04-01

    Full Text Available As empresas podem se utilizar de incentivos fiscais proporcionados pelo governo para investimentos em pesquisa, desenvolvimento e inovação. No entanto, poucas são aquelas que se utilizam de tais benefícios. Um dos motivos é o fato de não saberem identificar a inovação. Nesse sentido, o estudo consiste em elaborar um modelo de identificação da inovação para a utilização de incentivos fiscais. A pesquisa quanto aos objetivos foi classificada como descritiva. No que se refere aos procedimentos de coleta de dados utilizou-se o estudo de caso numa indústria de eletroeletrônicos de grande porte, na região sul brasileira. E, com relação à abordagem do problema, trata-se de uma pesquisa qualitativa. O modelo foi desenvolvido com base na Lei 11.1196, de 2005, Lei do Bem, no Manual de Oslo e Literatura sobre a Inovação. Os resultados da pesquisa indicam a validade do modelo proposto, uma vez que foi possível identificar a inovação tecnológica (produto, processo, mercado na empresa estudada para a utilização dos incentivos fiscais da Lei do Bem. Conclui-se que foi possível identificar os diferentes tipos de inovação tecnológica nos projetos de pesquisa, desenvolvimento e inovação na empresa estudada.There are several tax breaks provided by the government for investment in research, development and innovation that companies may benefit. However, there are few companies that use such benefits. One of the reasons is that they can not identify innovation. In this sense, this study aims at developing an innovative model for identifying the use of tax breaks. The research is classified as descriptive. With regard to data collection procedures, it was used the case study of a large electronics industry in the Brazilian southern region. In relation to the approach the problem, it is a qualitative research. The model was developed based on Law 11.1196 (2005, Lei do Bem, the Oslo Manual and Literature on Innovation. The survey

  7. Finnish industry's energy requirement

    International Nuclear Information System (INIS)

    Punnonen, J.

    2000-01-01

    Industry uses around half of the electricity consumed in Finland. In 1999, this amounted to 42.3 TWh and 420 PJ of fuel. Despite the continual improvements that have been made in energy efficiency, energy needs look set to continue growing at nearly 2% a year. Finnish industrial output rose by some 5.5% in 1999. In energy-intensive sectors such as pulp and paper, output rose by 3.4%, in the metal industry by 4%, and in the chemical industry by 3.1%. Growth across Finnish industry is largely focused on the electrical and electronics industries, however, where growth last year was 24.3% The Finnish forest products industry used a total of 26.1 TWh of electricity last year, up 1% on 1998. This small increase was the result of the industry's lower-than-average operating rate in the early part of the year The metal industry used 7.2 TWh of electricity, an increase of 5.8% on 1998. Usage in the chemical industry rose by 2% to 5.2 TWh. Usage by the rest of industry totalled 3.8 TWh, up 2.3% on 1998. All in all, industry's use of electricity rose by 2% in 1999 to 42,3 TWh. Increased demand on industry's main markets in Europe will serve to boost industrial output and export growth this year. This increased demand will be particularly felt in energy-intensive industries in the shape of an increased demand for electricity. Overall, electricity demand is expected to grow by 3% this year, 1% more than industry's longterm projected electricity usage growth figure of 2%. The structure of industry's fuel use in Finland has changed significantly over the last 25 years. Oil, for example, now accounts for only some 10% of fuel use compared to the 40% typical around the time of the first oil crisis. Oil has been replaced by biofuels, peat, and natural gas. The pulp and paper industry is the largest industrial user of renewable energy sources in Finland, and uses wood-related fuels to cover nearly 70% of its fuel needs

  8. Four Novel Cellulose Synthase (CESA Genes from <em>Birch> (<em>Betula platyphylla em>Suk. Involved in Primary and Secondary Cell Wall Biosynthesis

    Directory of Open Access Journals (Sweden)

    Xuemei Liu

    2012-09-01

    Full Text Available Cellulose synthase (CESA, which is an essential catalyst for the generation of plant cell wall biomass, is mainly encoded by the <em>CesA> gene family that contains ten or more members. In this study; four full-length cDNAs encoding CESA were isolated from<em> Betula platyphyllaem> Suk., which is an important timber species, using RT-PCR combined with the RACE method and were named as <em>BplCesA3em>, <em>−4em>,> −7 em>and> −8em>. These deduced CESAs contained the same typical domains and regions as their <em>Arabidopsis> homologs. The cDNA lengths differed among these four genes, as did the locations of the various protein domains inferred from the deduced amino acid sequences, which shared amino acid sequence identities ranging from only 63.8% to 70.5%. Real-time RT-PCR showed that all four <em>BplCesAs> were expressed at different levels in diverse tissues. Results indicated that BplCESA8 might be involved in secondary cell wall biosynthesis and floral development. BplCESA3 appeared in a unique expression pattern and was possibly involved in primary cell wall biosynthesis and seed development; it might also be related to the homogalacturonan synthesis. BplCESA7 and BplCESA4 may be related to the formation of a cellulose synthase complex and participate mainly in secondary cell wall biosynthesis. The extremely low expression abundance of the four BplCESAs in mature pollen suggested very little involvement of them in mature pollen formation in <em>Betula>. The distinct expression pattern of the four <em>BplCesAs> suggested they might participate in developments of various tissues and that they are possibly controlled by distinct mechanisms in <em>Betula.>

  9. <em>N>-Substituted 5-Chloro-6-phenylpyridazin-3(2<em>H>-ones: Synthesis, Insecticidal Activity Against <em>Plutella xylostella em>(L. and SAR Study

    Directory of Open Access Journals (Sweden)

    Song Yang

    2012-08-01

    Full Text Available A series of <em>N>-substituted 5-chloro-6-phenylpyridazin-3(2<em>H>-one derivatives were synthesized based on our previous work; all compounds were characterized by spectral data and tested for <em>in vitroem> insecticidal activity against <em>Plutella xylostellaem>. The results showed that the synthesized pyridazin-3(2<em>H>-one compounds possessed good insecticidal activities, especially the compounds 4b, 4d, and 4h which showed > 90% activity at 100 mg/L. The structure-activity relationships (SAR for these compounds were also discussed.

  10. INDICADORES EM SANEAMENTO

    OpenAIRE

    Costa, Samuel Alves Barbi; Côrtes, Larissa Silveira; Coelho Netto, Taiana; Freitas Junior, Moacyr Moreira de

    2016-01-01

    Este artigo se propõe a analisar a evolução dos prestadores de serviços de saneamento do estado de MinasGerais entre os anos de 2005 e 2010 com base nos indicadores do Sistema Nacional de Informações em Saneamento(SNIS). Foram definidos parâmetros técnicos para a análise dos indicadores, classificados os resultados como satisfatórios(verdes) ou insatisfatórios (vermelhos). Esta categorização atende a concepção da Regulação Sunshine, trazendo à tona omonitoramento do progresso das ações no set...

  11. Em favor da talassografia

    Directory of Open Access Journals (Sweden)

    Jean-Louis Boudou

    2001-01-01

    Full Text Available A Talassografia (“descrição do mar” interessa-sepelos impactos físicos, biológicos, ecológicos... culturais da violenta antropização dos ambientes costeiros (oceânicos e continentais, caracterizados pelaexigüidade, vulnerabilidade, fragilidade e plasticidade. Como o Brasil é um “país marítimo”, os geó-grafos (os talassógrafos brasileiros são convidadosa intensificar suas pesquisas nas áreas costeiras e acriar novas estruturas para divulgá-las: Revista, Encontros, Associação, Pós-Graduação... tudo em prolda talassografia.

  12. Surto de sarampo na regiao metropolitana de Campinas, SP

    Directory of Open Access Journals (Sweden)

    Eder Gatti Fernandes

    2013-12-01

    Full Text Available O Brasil não apresenta circulação endêmica do vírus do sarampo desde o ano 2000. Entre maio e junho de 2011, a Região Metropolitana de Campinas, Estado de São Paulo, registrou três casos de sarampo. Foram descritos casos, as medidas de controle, a busca de possível fonte e de casos secundários. A caracterização genotípica do vírus identificou o genótipo D4, circulante no continente europeu. Não foram encontrados casos índice ou secundários. As medidas de controle efetuadas, aliadas à cobertura vacinal adequada da Região Metropolitana de Campinas contribuíram para que a transmissão da doença fosse interrompida.

  13. Avaliação da substituição do milho pela mandioca e seus resíduos na digestibilidade aparente em novilhas confinadas Evaluation of cassava and its industrial residues replacing corn in the apparent digestibility for feedlot heifers

    Directory of Open Access Journals (Sweden)

    Antônio Ferriani Branco

    1999-11-01

    Full Text Available O objetivo deste trabalho foi avaliar a substituição do milho pela casca de mandioca, farinha de varredura ou raspa de mandioca sobre a digestibilidade aparente da matéria seca (MS, matéria orgânica (MO, proteína bruta (PB, energia bruta (EB, fibra em detergente neutro (FDN, fibra em detergente ácido (FDA e amido (AM, utilizando a cinza insolúvel em ácido (CIA como indicador interno em novilhas confinadas. Foram utilizadas 28 novilhas mestiças, com aproximadamente 24 meses de idade e peso médio inicial de 365kg, distribuídas em um delineamento inteiramente casualizado, nos quatro tratamentos e sete repetições. A substituição do milho pela raspa de mandioca aumentou o coeficiente de digestibilidade aparente da MS, PB, MO, EB e AM. O coeficiente de digestibilidade aparente da FDN foi semelhante entre rações com casca e com raspa de mandioca. O coeficiente de digestibilidade aparente da FDA foi menor para a ração com farinha de varredura e semelhante para as demais rações.The objective of this work was to study the effect of replacement of corn meal by cassava hulls, cassava meal or cassava roots on apparent digestibility coefficient of dry matter, organic matter, crude protein, crude energy, neutral detergent fiber, acid detergent fiber and starch. Ash insoluble acid (AIAwas used as an internal indicator, in heifers. Twenty-eight crossbred heifers, averaging 365kg live weight and 24 months old, were used in a complete randomized design to test four diets with seven repetitions. The replacement of corn by cassava roots increased the apparent digestibility coefficient of dry matter, organic matter, crude protein, crude energy and starch. The apparent digestibility coefficient of the neutral detergent fiber was similar in diets with cassava hulls and diets with cassava roots. The apparent digestibility coefficient of the acid detergent fiber was smaller for cassava meal and similar for other diets.

  14. Emprego e acidentes de trabalho na indústria frigorífica em áreas de expansão do agronegócio, Mato Grosso, Brasil Employment and occupational accidents in the slaughterhouse industry in expansion areas of agribusiness, Mato Grosso, Brasil

    Directory of Open Access Journals (Sweden)

    Marly de Cerqueira Vasconcellos

    2009-12-01

    Full Text Available Os agravos à saúde do trabalhador vêm, historicamente, acompanhando o crescimento econômico e a diversificação dos processos produtivos. O agronegócio expandiu-se nas últimas três décadas no estado de Mato Grosso e nele a intensificação das atividades do setor pecuário traduziu-se na instalação de frigoríficos, aumento de empregos formais e acidentes de trabalho. Este estudo propôs-se a caracterizar os acidentes de trabalho em indústrias frigoríficas do estado de Mato Grosso no período de 2000 a 2005, contextualizando-os com o mercado de trabalho e a inserção da mão de obra, através da utilização dos indicadores de acidentes de trabalho oriundos das Comunicações de Acidentes do Trabalho do Ministério da Previdência Social, dados da RAIS, do Ministério do Trabalho e Emprego, e da PNAD, do IBGE. Os resultados apontaram para o crescimento de postos de trabalho com expressiva rotatividade, diminuição do salário de admissão (de 2,2 para 2,0 salários mínimos e a maioria da mão de obra com baixa escolaridade. O setor frigorífico ocupou a segunda posição na estatística de doenças e acidentes de trabalho registrados no estado, cuja taxa de incidência cresceu de 41,2 para 46,5 acidentes de trabalho por mil trabalhadores, com maior incidência na faixa etária dos 18 aos 24 anos (49,8 acidentes/mil trabalhadores, atingindo principalmente os trabalhadores ocupados nas principais etapas do processo produtivo. Os resultados sugerem indícios de precarização do emprego e condições de trabalho na atividade frigorífica e insuficiência da ação de vigilância/fiscalização estatal no setor, bem como baixos investimentos dos empresários na saúde e segurança do trabalho.Historically, workers' health problems have been increasing as the economy grows and the productive processes diversify. In the last three decades, the agribusiness has been expanding in the State of Mato Grosso (central region of Brazil. In

  15. Landscape of Industry: Transformation of (Eco Industrial Park through history

    Directory of Open Access Journals (Sweden)

    Archana Sharma

    2013-11-01

    Full Text Available The landscape of industry has been changing over time. Industry has transformed and many tangents have emerged from the sporadic home-based cottage industries to geographically scattered large manufacturing industries to co-located industrial parks to environment friendly eco-industrial parks. Curiosity about the catalysts that bring about the transformation of industrial landscape is the motivation of this article. Through the narrative on Industrial Park and the gradual shift towards Eco-Industrial Park, this article aims to shed light on the context and conditions that act as catalysts for industrial transformations, so as to serve as a reference for predicting future changes in industrial landscape.

  16. Analysis of the procedural and wastewater treatment at a beverage bottling industry in the state of Pernambuco, Brazil | Análise do tratamento processual e de águas residuais em uma indústria de engarrafamento de bebidas no estado de Pernambuco, Brasil

    Directory of Open Access Journals (Sweden)

    Emmanuelle Maria Gonçalves Lorena

    2016-10-01

    Full Text Available Currently, the issue of the conscious use of water is highlighted in worldwide discussion. This natural resource is consumed inappropriately generating waste and, in most cases, to discharge to the environment outside the minimum standards of acceptance. Great part of the industries need treated water as a resource to be incorporated in their processes, generating waste that should not be left as environmental liabilities, identifying legal action to act and reduce environmental impacts. Thus, the purpose of this study was to investigate the treatment of wastewater in a beverage industry in the bottling process in the countryside of Pernambuco. a case study was performed through technical visit, the beverage bottling industry, as well as an exploratory research for collection of secondary data. The technical visit consisted of observe the water treatment steps, as well as prevailing environment laws. Analysis of the results, the industry performs preliminary treatment, primary and secondary, common process and sufficient for this type of effluent. Furthermore, there is the process of treating the effluent from the bottle washing process for use in beverage Industry "A" meets the recommendations of studied authors. In turn, the data of the test results have not been studied in this way, it is not possible to draw conclusions about the efficiency of the treatment process. Adding to this the need for further research for analysis of pollutants and hence the creation of effective methods to mitigate impacts from these industries.

  17. Industry and energy; Industrie et energie

    Energy Technology Data Exchange (ETDEWEB)

    Birules y Bertran, A.M. [Ministere des Sciences et de la Technologie (Spain); Folgado Blanco, J. [Secretariat d' Etat a l' Economie, a l' Energie et aux PME du Royaume d' Espagne (Spain)

    2002-07-01

    This document is the provisional version of the summary of the debates of the 2433. session of the European Union Council about various topics relative to the industry and the energy. The energy-related topics that have been debated concern: the government helps in coal industry, the internal electricity and gas market, the trans-European energy networks, the bio-fuels in transportation systems, the energy charter, the pluri-annual energy program, and the green book on the security of energy supplies. (J.S.)

  18. Industry Study, Environment Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    practices. For example, the cruising sector of the tourism industry has widely- acknowledged negative environmental impacts (carbon emissions and ocean...Services: An Industry Analysis ,” (2009): 4. http://www.berr.gov.uk/files/file50253.pdf 18 Ibid., 5. 19 EBI, 21 20 Department for Business...Ibid., 26. 50 DataMonitor Country Analysis Report, “Korea: In-Depth PESTLE Insights,” (June 2008): 4. 51 EBI, “3000,” 1-22. 52 Ibid., 5-130, 5

  19. Industry X.0 : Reimaging industrial development

    CSIR Research Space (South Africa)

    Zachar, H

    2017-10-01

    Full Text Available Quantum Mainframe Client-server & PCs Web 1.0 ecommerce Web 2.0, cloud, mobile Big data, analytics, visualization IoT & smart machines Artificial intelligence Quantum computing 6 T o d a y 1950 1960 1970 1980 1990 2000 2010 2020... NEW SET OF CORE CAPABILITIES TO SUCCEED INDUSTRY X.0 INDUSTRY 4.0 EFFICIENCIES HYPER-PERSONALIZED EXPERIENCES & NEW SOURCES OF GROWTH SOCIAL MEDIA CLOUD ANALYTICS MOBILITY WEB 1.0/E-COMMERCE PCS, SERVERS AND DEDICATED HARDWARE PCS...

  20. Industry X.0 : Reimaging industrial development.

    CSIR Research Space (South Africa)

    Zachar, H

    2017-10-01

    Full Text Available Quantum Mainframe Client-server & PCs Web 1.0 ecommerce Web 2.0, cloud, mobile Big data, analytics, visualization IoT & smart machines Artificial intelligence Quantum computing 6 T o d a y 1950 1960 1970 1980 1990 2000 2010 2020... NEW SET OF CORE CAPABILITIES TO SUCCEED INDUSTRY X.0 INDUSTRY 4.0 EFFICIENCIES HYPER-PERSONALIZED EXPERIENCES & NEW SOURCES OF GROWTH SOCIAL MEDIA CLOUD ANALYTICS MOBILITY WEB 1.0/E-COMMERCE PCS, SERVERS AND DEDICATED HARDWARE PCS...

  1. INFLUÊNCIA ESTOICA NA CONCEPÇÃO DE <em>STATUS> E <em>DICTUM> COMO <em> QUASI RES EM> (ὡσανεì τινά EM ABERLARDO STOIC INFLUENCE IN ABELARD'S CONCEPTION OF <em>STATUS> AND <em>DICTUM> AS <em>QUASI RESem> (ὡσανεì τινά.

    Directory of Open Access Journals (Sweden)

    Guy Hamelin

    2011-09-01

    Full Text Available Na sua obra, Pedro Abelardo (1079-1142 destaca duas noções metafísicas que fundamentam sua teoria lógica: o <em style="mso-bidi-font-style: normal;">statusem> e o <em style="mso-bidi-font-style: normal;">dictum propositionisem>, ao causar, respectivamente, a imposição (<em style="mso-bidi-font-style: normal;">impositioem> dos termos universais e o valor de verdade das proposições. Trata-se de expressões que se referem a naturezas ontológicas peculiares, na medida em que não são consideradas coisas (<em style="mso-bidi-font-style: normal;">resem>, mesmo que constituem causas. Todavia, também não são nada. Abelardo as chama de ‘quase coisas’ (<em style="mso-bidi-font-style: normal;">quasi resem>. No presente artigo, explicamos, primeiro, essas duas noções essenciais da lógica abelardiana, antes de tentar, em seguida, encontrar a fonte dessa metafísica particular. Em oposição a comentadores importantes da lógica de Abelardo, que estimam que haja uma forte influência platônica sobre essa concepção específica, defendemos antes, com apoio de textos significativos e de acordo com o nominalismo abelardiano, que a maior ascendência sobre a metafísica do nosso autor é a do estoicismo, sobretudo, antigo.In his work, Peter Abelard (1079-1142 highlights two metaphysical notions, which sustain his logical theory: the <em>status> and the <em>dictum propositionisem>, causing respectively both the imposition (<em>impositio> of universal terms and the thuth-value of propositions. Both expressions refer to peculiar ontological natures, in so far as they are not considered things (<em>res>, even if they constitute causes. Nevertheless, neither are they ‘nothing’. Abelard calls them ‘quasi-things’ (<em>quasi resem>. In the present article, we expound first these two essential notions of Abelardian logic before then trying to find the source of this particular metaphysics. Contrary to some important

  2. Ploidia de DNA em astrocitomas: estudo em 66 pacientes brasileiros

    Directory of Open Access Journals (Sweden)

    KRUTMAN-ZVEIBIL DEBORAH

    1999-01-01

    Full Text Available A determinação do conteúdo de DNA nuclear (fração de fase S e ploidia de DNA foi realizada por meio de análise de imagem em 66 astrocitomas, a partir de material fixado em formalina e seccionado em cortes de 5 micrômetros corados pela técnica de Feulgen. Nossos resultados mostraram forte relação entre a idade do paciente, grau histológico e sobrevida , com a ploidia de DNA e o percentual de células em fase de síntese. A análise da atividade proliferativa de astrocitomas intracranianos é a nosso ver muito útil no entendimento do comportamento biológico , do prognóstico e para o planejamento terapêutico dessas lesões.

  3. Call for Papers and Announcement Joint International Conference of Industrial Engineering and Engineering Management (IE&EM'2002)And International Conference on Electronic Commerce Engineering (ICECE'2002)%“2002年工业工程与工程管理国际会议(IE&EM’2002)”暨“2002年电子商务工程国际会议(IceCE’2002)”征文通知

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Enterprise forum Exhibition Topics Participants are particularly welcome to submit work relevant to the conference theme. Submissions for panel discussions and workshops are also encouraged. Submissions dealing with, but not limited to, the following topics are invited. Topics of IE&EM' 2002 1. The trend of Industrial Engineering in digital era 2. Theory, Development and Application of Industrial Engineering 3. Human Factors and Ergonomic 4. Enterprise Integration and Digital Enterprise 5. Facility Planning and Logistics Engineering 6. Production and Operation Management 7. Systems Analysis and Layout Design 8. Total Quality Management and Business Process Improving 9. Modern Advanced Manufacturing Technology 10. Innovation Management/Change Management/Know-ledge Management 11. Management Information System 12. Engineering Management 13. Education, Training and Others Topics of ICECE'2002 1. Fundamental Issues for eCE 2. Computing Infrastructure for eCE 3. Agile Enterprise Modeling, Management and Integration in eCE 4. "e- Technologies for Manufacturing Engineering 5. Information-based Manufacturing and Digital Factory 6. Collaborative Engineering in EC 7. Knowledge Engineering in EC 8. Marketing Theory and Methodologies in EC 9. Economics, Policy and Strategy 10. Trade and shopping 11. Global Online Education and Training 12. New Philosophy and Methodology for Global Industrial Design 13. Culture and Social Issues on EC-driven Global Manufacturing 14. Networked Facilities and Plug-and-Play Technology Chairmen and Members of Committees Conference General Chairmen: Lu Yongxiang, President, China Mechanical Engineering Society (China) Wang Dazhong, President, Tsinghua University, China International Academic Committee Chairman: G. Salvendy, Purdue University, USA, and Tsinghua University, China Co-Chairmen: Walter Eversheim, Aachen University of Technology, Germany Wu Chen, Tsinghua University (China) Chen Xiaotian (China) Rodney Marsh, Head, School of Engineering, Leeds

  4. Busca de estruturas em grandes escalas em altos redshifts

    Science.gov (United States)

    Boris, N. V.; Sodré, L., Jr.; Cypriano, E.

    2003-08-01

    A busca por estruturas em grandes escalas (aglomerados de galáxias, por exemplo) é um ativo tópico de pesquisas hoje em dia, pois a detecção de um único aglomerado em altos redshifts pode por vínculos fortes sobre os modelos cosmológicos. Neste projeto estamos fazendo uma busca de estruturas distantes em campos contendo pares de quasares próximos entre si em z Â3 0.9. Os pares de quasares foram extraídos do catálogo de Véron-Cetty & Véron (2001) e estão sendo observados com os telescópios: 2,2m da University of Hawaii (UH), 2,5m do Observatório de Las Campanas e com o GEMINI. Apresentamos aqui a análise preliminar de um par de quasares observado nos filtros i'(7800 Å) e z'(9500 Å) com o GEMINI. A cor (i'-z') mostrou-se útil para detectar objetos "early-type" em redshifts menores que 1.1. No estudo do par 131046+0006/J131055+0008, com redshift ~ 0.9, o uso deste método possibilitou a detecção de sete objetos candidatos a galáxias "early-type". Num mapa da distribuição projetada dos objetos para 22 escala. Um outro argumento em favor dessa hipótese é que eles obedecem uma relação do tipo Kormendy (raio equivalente X brilho superficial dentro desse raio), como a apresentada pelas galáxias elípticas em z = 0.

  5. Nuclear industry technology boomerang

    International Nuclear Information System (INIS)

    Scholler, R.W.

    1987-01-01

    The benefits to the medical, pharmaceutical, semiconductor, computer, video, bioscience, laser, defense, and numerous high-tech industries from nuclear technology development fallout are indeed numerous and increase every day. Now those industries have made further progress and improvements that, in return, benefit the nuclear industry. The clean-air and particle-free devices and enclosures needed for protection and decontamination are excellent examples

  6. VE of construction industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-10-15

    This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

  7. Modern electrochemistry and industry

    International Nuclear Information System (INIS)

    Kim, Sun Yong

    1985-04-01

    This book is divided into fifteen chapters on modern electrochemistry and industry. The contents of this book are electrochemistry and industry, electrochemistry for electrolyte like ionic mobility quantity of activity of electrolyte, potential balance system like cell potential, concentration cell and membrane potential, electrochemical kinetics, electrochemistry for surfactant, electrochemistry for electrolysis test such as polarography, chronopotentiometry and Cyclic voltametry, electrolysis reactor NaOH electrolysis industry, H 2 O electrolysis, molten metal electrolysis, copper electrolysis, battery and electro-organic chemistry.

  8. VE of construction industry

    International Nuclear Information System (INIS)

    1987-10-01

    This book gives descriptions of basic of VE of construction industry including doing away with mannerism, necessity of cost reduction, management method of cost reduction, thinking of idea, target of VE, starting VE activity, technical method of VE of construction industry such as thinking of idea with brainstorming, function trade method, new brainstorming, MM method, morphology analysis and lateral thinking, cases of VE of construction industry.

  9. Uranium industry annual, 1986

    International Nuclear Information System (INIS)

    1987-01-01

    Uranium industry data collected in the EIA-858 survey provide a comprehensive statistical characterization of annual activities of the industry and include some information about industry plans over the next several years. This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities utility market requirements and related topics

  10. Miscellaneous Industrial Mineral Operations

    Data.gov (United States)

    Department of Homeland Security — This map layer includes miscellaneous industrial minerals operations in the United States. The data represent commodities covered by the Minerals Information Team...

  11. Industrial Economics in Scandinavia

    DEFF Research Database (Denmark)

    Foss, Nicolai Juul; Møllgaard, Peter

    2004-01-01

    Based on diverse research methods, we trace and map industrial economics research in Denmark, Norway and Sweden in the periode of 1880 to 1908. After describing this research in terms of key contributors, we argue that industrial economics developed rather unevenly in the Scandinavian countries....... Danish research was mainly theoretical and strongly oriented towards the international context, whereas Norwegian research was largely industry analysis with a strong leaning towards managerial economics. Swedish research in industrial economics is very scant until the end of the 1960s.JEL Code: B1, B2...

  12. Process and petroleum industry

    International Nuclear Information System (INIS)

    1998-01-01

    In comparison with many industries, the oil and gas industry is somewhat unique in that it has been operating in a global environment for many decades. The North Sea exploration and production industry is now entering a challenging era for business growth which is a mature region with smaller and smaller fields, more difficult to find and which require innovative development schemes. This presentation relates to information technology offering the exploration and production industry a unique set of business tools to improve performance and enable growth while reducing risk

  13. Process and petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    In comparison with many industries, the oil and gas industry is somewhat unique in that it has been operating in a global environment for many decades. The North Sea exploration and production industry is now entering a challenging era for business growth which is a mature region with smaller and smaller fields, more difficult to find and which require innovative development schemes. This presentation relates to information technology offering the exploration and production industry a unique set of business tools to improve performance and enable growth while reducing risk

  14. Standard Industry Fare Level

    Data.gov (United States)

    Department of Transportation — Standard Industry Fare Level was establish after airline deregulation to serve as the standard against which a statutory zone of operating expense reasonableness was...

  15. Forest industries energy research

    Energy Technology Data Exchange (ETDEWEB)

    Scott, G. C.

    1977-10-15

    Data on energy use in the manufacturing process of the wood products industry in 1974 are tabulated. The forest industries contributed 10% of New Zealand's factory production and consumed 25% of all industrial energy (including that produced from self-generated sources such as waste heat liquors and wood wastes) in that year. An evaluation of the potential for savings in process heat systems in existing production levels is shown to be 3% in the short, medium, and long-term time periods. The industry has a high potential for fuel substitution in all sectors. The payback periods for the implementation of the conservation measures are indicated.

  16. Wastewater Industrial Contributors

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Industrial contributors to municipal wastewater treatment facilities in Iowa for the National Pollutant Discharge Elimination System (NPDES) program.

  17. Automotive Industry in Malaysia

    DEFF Research Database (Denmark)

    Wad, Peter; Govindaraju, V.G.R. Chandran

    2011-01-01

    ) limited participation in the global value chain. Although the Malaysian infant industry protection policy comprised many promising initiatives, the national and the overall domestic automobile industry ended up as a captive of the regionalised Japanese keiretsu system in automobile manufacturing. A new...... expanded in terms of sales, production, employment and local content, but failed in industrial upgrading and international competitiveness. The failures can be attributed to (a) lack of political promotion for high challenge-high support environment, (b) low technological and marketing capabilities and (c...... transformation is required to push the industry beyond its current performance through a more strategic productive coalition with multiple stakeholders including trade unions....

  18. Transportation Industry 2004

    National Research Council Canada - National Science Library

    Miller, Evan; Kathir, Nathan; Brogan, Dennis M

    2004-01-01

    .... Because the defense sector relies on commercial transportation for both peacetime activities and for power projection, senior military leaders must understand the global transportation industry...

  19. Mapping of wine industry

    OpenAIRE

    Віліна Пересадько; Надія Максименко; Катерина Біла

    2016-01-01

    Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very un...

  20. Extraction of Dihydroquercetin<em> em>from <em>Larix gmeliniem>i> em>with Ultrasound-Assisted and Microwave-Assisted Alternant Digestion

    Directory of Open Access Journals (Sweden)

    Yuangang Zu

    2012-07-01

    Full Text Available An ultrasound and microwave assisted alternant extraction method (UMAE was applied for extracting dihydroquercetin (DHQ from <em>Larix gmeliniem>i> wood. This investigation was conducted using 60% ethanol as solvent, 1:12 solid to liquid ratio, and 3 h soaking time. The optimum treatment time was ultrasound 40 min, microwave 20 min, respectively, and the extraction was performed once. Under the optimized conditions, satisfactory extraction yield of the target analyte was obtained. Relative to ultrasound-assisted or microwave-assisted method, the proposed approach provides higher extraction yield. The effect of DHQ of different concentrations and synthetic antioxidants on oxidative stability in soy bean oil stored for 20 days at different temperatures (25 °C and 60 °C was compared. DHQ was more effective in restraining soy bean oil oxidation, and a dose-response relationship was observed. The antioxidant activity of DHQ was a little stronger than that of BHA and BHT. Soy bean oil supplemented with 0.08 mg/g DHQ exhibited favorable antioxidant effects and is preferable for effectively avoiding oxidation. The <em>L. gmeliniiem> wood samples before and after extraction were characterized by scanning electron microscopy. The results showed that the UMAE method is a simple and efficient technique for sample preparation.

  1. Monitoramento atmosférico passivo de SO2, NO2 e O3 em áreas urbanas e de influência industrial como prática de química ambiental para alunos de graduação Atmospheric passive monitoring of SO2, NO2 and O3 in urban areas and in those under industrial influence as an environmental chemistry experiment for undergraduate students

    Directory of Open Access Journals (Sweden)

    Vânia P. Campos

    2006-07-01

    Full Text Available This study is a result of undergraduate student participation in the Environmental Chemistry discipline provided by the Chemistry Institute/UFBA. The students were involved in the development of passive samplers, a project of the LAQUAM (Environmental Analytical Chemistry Laboratory. The students' residences and other neighborhoods were used to create a passive sampling network, allowing the measurement of atmospheric levels of pollutants in urban areas and in those under industrial influence. The assembly of the passive samplers, including impregnation of filters and chemical analysis were part of the students' practice tasks. The results were analyzed taking into consideration the Brazilian legislation.

  2. Preferencia alimenticia del ácaro depredador <em>Balaustium> sp. en condiciones controladas

    Directory of Open Access Journals (Sweden)

    Muñoz Karen

    2009-04-01

    Full Text Available

    Se evaluó la preferencia de presas de <em>Balaustium> sp., enemigo natural de diferentes artrópodos plaga, y el cual es nativo de la Sabana de Bogotá. En unidades experimentales construidas con foliolos de plantas de rosa se colocaron independientemente individuos de <em>Balaustium> sp. y se registró el número de presas consumidas. De esta manera se determinó la preferencia de los tres estados móviles del ácaro depredador <em>Balaustium> sp. por diferentes edades de tres presas. Las especies y edades de las presas estudiadas fueron: huevos, ninfas y adultos de <em>Trialeurodes vaporariorumem>, huevos, ninfas y adultos de <em>Tetranychus urticaeem>, y larvas de primer y segundo instar y adultos de <em>Frankliniella occidentalisem>. Los estados menos desarrollados fueron preferidos, aunque se observó que los adultos del depredador tienen gran habilidad para consumir adultos de <em>T. vaporariorumem>. La presa preferida por las larvas de <em>Balaustium> sp. fue los huevos de <em>T. urticaeem> con una proporción de consumo de 0,54 de los huevos que se ofrecieron de esta presa; las deutoninfas del depredador eligieron huevos de <em>T. vaporariorumem> (0,537 o de <em>T. urticaeem> (0,497 y los adultos de <em>Balaustium> sp. prefrieron los huevos de <em>T. vaporariorumem> (0,588.

  3. Spring 2007. Industry Study. Manufacturing Industry

    Science.gov (United States)

    2007-01-01

    their success. Each company advertised the world-class capabilities of their product, not its price. By contrast, a struggling company we visited in...business disruptions lurking within the Trojan Horse we have nestled in the US industrial base. It is important to note that a catastrophic disaster from

  4. Industry Study, Weapons Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    Agencies Sdn. Bhd.; Malaysia Aircraft Inspection, Repair, and Overhaul Depot; Malaysia American Malaysian Chamber of Commerce; Malaysia Samsung Techwin...Ministry of Defense: Defense Science and Technology Agency; Singapore Ministry of Defense: Industrial Affairs Office; Malaysia Boustead Shipping...Singapore, Malaysia , and Korea). Recommended policy changes included in the conclusion will strengthen these conditions, given that government goals and

  5. Industry Study, Electronics Industry, Spring 2009

    Science.gov (United States)

    2009-01-01

    not have the flexibility in their processes to quickly produce custom system-on-chips because they are optimized for high-end production. Dell ...building its semiconductor industry, Malaysia has moved in the same overall directions but has lagged a few years. Malaysia has succeeded in the backend

  6. Polish food industry 2008-2013

    OpenAIRE

    Mroczek, Robert; Drożdż, Jadwiga; Tereszczuk, Mirosława; Urban, Roman

    2014-01-01

    The aim of the study is to evaluate the functioning of the food industry and its various sectors in 2008-2013. Meat and poultry industry. Dairy industry. Fishing industry. Milling industry. Sugar industry. Oil-mill industry. Processing of fruit, vegetables and potatoes. Bakery industry. Confectionery industry. Feed industry. Production of other food products. Production of alcoholic beverages.Tobacco industry. Food industry.

  7. Staphylococcus aureus e Salmonella sp. em queijos de coalho artesanais produzidos em São Rafael, Rio Grande do Norte

    Directory of Open Access Journals (Sweden)

    Tarciara Magley da Fonseca Pereira

    2017-06-01

    Full Text Available O queijo de coalho artesanal é produto de origem animal muito consumido principalmente na região Nordeste do Brasil. É comumente fabricado com leite cru, não pasteurizado, como matéria prima, sem a utilização de boas práticas higiênicas, podendo veicular micro-organismos patogênicos ao consumidor. Assim, objetivou-se avaliar a presença de Salmonella sp. e quantificar Staphyloccocus aureus em queijos de coalho produzidos artesanalmente no município de São Rafael Rio Grande do Norte.Foram realizadas coletas em triplicata em sete queijarias artesanais do município, e, em seguida, os queijos foram transportados imediatamente em caixas isotérmicas, ao Laborátório de Biotecnologia Industrial da Universidade Federal Rural do Semi-Árido, onde foram submetidos à análise microbiológica de forma asséptica, conforme metodologia recomendada pela Instrução Normativa nº 62, de 26 de agosto de 2003, do Ministério da Agricultura, Pecuária e Abastecimento. Todas as amostras apresentaram elevadas contagens de Staphylococcus aureus, estando em desconformidade com o padrão exigido pela legislação brasileira para este grupo microbiano. Foi constatado ausência de Salmonella sp. nas amostras avaliadas. As análises microbiológicas evidenciaram péssimas condições de higiene de todos os queijos estudados, já que os mesmos apresentaram grande contaminação por Staphylococcus aureus, o que pode representar riscos à saúde pública.

  8. Conjuntivite em animais de companhia

    OpenAIRE

    Gonçalves, Mariana Inês Pereira Coelho

    2015-01-01

    Dissertação de Mestrado Integrado em Medicina Veterinária, Ciências Veterinárias A conjuntivite é a doença ocular mais frequentemente diagnosticada em Medicina Veterinária, tanto em cães como em gatos. O facto de a conjuntiva ser uma membrana mucosa tão exposta a agentes externos faz com que esteja bastante suscetível a sofrer lesões, com consequente inflamação. Nesta dissertação abordam-se os diferentes tipos de conjuntivite, que são classificados de acordo com a sua etiologia. No Hospita...

  9. Conhecimento e interesse em economia

    Directory of Open Access Journals (Sweden)

    João Antonio de Paula

    2003-09-01

    Full Text Available O artigo argumenta em favor da necessidade de preservar o pluralismo em economia. Discute: i a natureza do conhecimento e de sua produção; ii as especificidades da produção do conhecimento em economia e os condicionamentos histórico-culturais do conhecimento; iii as implicações da hegemonia de certa concepção de método em economia.The article argues the need to preserve the pluralism in economics. The article examines: i the nature of the knowledge and of its production; ii the specificity of the knowledge production in economics and the historical and cultural conditionings of the knowledge; iii the implications of the hegemony of a certain methodological conception in economics.

  10. Resiliência na organização: estudo de caso da medição e avaliação da resiliência de indivíduos em uma organização industrial

    Directory of Open Access Journals (Sweden)

    Fernando Pretel Pereira Job

    2007-05-01

    Full Text Available A resiliência seria o desenvolvimento normal sob condições difíceis. Desta forma, se pensarmos a resiliência como possível de ser aprendida e desenvolvida ao longo da vida, sua avaliação se torna fundamental para que mecanismos de proteção e de fomentação sejam criados de modo a garantir que os indivíduos estejam melhores preparados para enfrentar os momentos de incertezas e mudanças cada vez mais freqüentes em suas vidas.

  11. Pharmacist-industry relationships.

    Science.gov (United States)

    Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

    2017-12-01

    The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

  12. Avaliação de um sistema industrial de resfriamento de água.

    OpenAIRE

    Eduardo Hiroshi Oikawa

    2012-01-01

    Neste trabalho, foi estudado o desempenho de um sistema constituído de torres de resfriamento e a sua integração em uma planta industrial de hidrogenação de butadieno. Caracterizou-se o desempenho das torres de resfriamento com base em um modelo fenomenológico, cujos parâmetros foram obtidos a partir da medição de variáveis operacionais reais. O processo de hidrogenação foi configurado em um simulador de processos, sendo o caso base estabelecido nas condições de projeto. Elaborou-se um módulo...

  13. Geothermal industry assessment

    Energy Technology Data Exchange (ETDEWEB)

    1980-07-01

    An assessment of the geothermal industry is presented, focusing on industry structure, corporate activities and strategies, and detailed analysis of the technological, economic, financial, and institutional issues important to government policy formulation. The study is based principally on confidential interviews with executives of 75 companies active in the field. (MHR)

  14. Aluminum Industry Technology Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2003-02-01

    This roadmap describes the industry's R&D strategy, priorities, milestones, and performance targets for achieving its long-term goals. It accounts for changes in the industry and the global marketplace since the first roadmap was published in 1997. An updated roadmap was published November 2001. (PDF 1.1 MB).

  15. Industry and Happiness

    DEFF Research Database (Denmark)

    Olsén, Peter; Nielsen, Birger Steen; Nielsen, Kurt Aagaard

    1996-01-01

    A wage earner utopia on a democratic innovation of society. A hermeneutic reconstruction from an action research project with a group of workers from the danish fishing industry.......A wage earner utopia on a democratic innovation of society. A hermeneutic reconstruction from an action research project with a group of workers from the danish fishing industry....

  16. Uranium industry annual 1998

    International Nuclear Information System (INIS)

    1999-01-01

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data provides a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ''Uranium Industry Annual Survey'' is provided in Appendix C. The Form EIA-858 ''Uranium Industry Annual Survey'' is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs

  17. EU Industrial Policy

    DEFF Research Database (Denmark)

    Pellegrin, Julie; Giorgetti, Maria Letizia; Jensen, Camilla

    Following disregard in the 1980s, industrial policy has recently attracted policy attention at EU level. The objective of this study provided by Policy Department A at the request of the ITRE Committee, is to establish the state of the art of a coordinated and integrated EU industrial policy...

  18. Industrial applications and metallurgy

    International Nuclear Information System (INIS)

    Torres M, N.; Melendrez C, G.; Morales, F.L.

    1989-01-01

    From 1961 the use of nuclear energy in the industrial field in Colombia has a big advance. Today nuclear isotopes are used by private companies in this kind of application the Area of Industrial Applications and Metallurgy was the institution section that has trained and has transferred the technology needed for this purpose

  19. Manual on industrial radiography

    International Nuclear Information System (INIS)

    1981-08-01

    This manual is intended as a source of educational material to personnel seeking certification as industrial radiographers, and as a guide and reference text for educational organizations that are providng courses in industrial radiography. It covers the basic principles of x-ray and gamma radiation, radiation safety, films and film processing, welding, casting and forging, aircraft structures and components, radiographic techniques, and records

  20. Innovations in Hospitality Industry

    Science.gov (United States)

    Dzhandzhugazova, Elena A.; Blinova, Ekaterina A.; Orlova, Liubov N.; Romanova, Marianna M.

    2016-01-01

    The article focuses on the study of the role and importance of innovation, its classification, the problems of its application in the hotel industry with emphasis on the application of sensory marketing tools in the development of the innovative marketing mix within the hospitality industry. The article provides an analysis of the "seven…

  1. Uranium industry annual 1994

    International Nuclear Information System (INIS)

    1995-01-01

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data collected on the ''Uranium Industry Annual Survey'' (UIAS) provide a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ''Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,'' is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2

  2. RESTRUCTURING OF INDUSTRIAL ENTERPRISE

    Directory of Open Access Journals (Sweden)

    L. I. Podderegina

    2009-01-01

    Full Text Available The paper presents main principles for execution of current and strategic restructuring of national enterprises while using experience of countries with developed market economy. The principles contribute to higher efficiency in internal industrial relations at national industrial enterprises.

  3. Australian uranium industry

    Energy Technology Data Exchange (ETDEWEB)

    Warner, R K

    1976-04-01

    Various aspects of the Australian uranium industry are discussed including the prospecting, exploration and mining of uranium ores, world supply and demand, the price of uranium and the nuclear fuel cycle. The market for uranium and the future development of the industry are described.

  4. Commercial Banking Industry Survey.

    Science.gov (United States)

    Bright Horizons Children's Centers, Cambridge, MA.

    Work and family programs are becoming increasingly important in the commercial banking industry. The objective of this survey was to collect information and prepare a commercial banking industry profile on work and family programs. Fifty-nine top American commercial banks from the Fortune 500 list were invited to participate. Twenty-two…

  5. Nuclear industry chart

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    As part of a survey on Switzerland a pull-out organisation chart is presented of the nuclear industry showing Swiss government bodies and industrial concerns. Their interests, connections with each other and their associations with international and other national organizations and firms are indicated. (U.K.)

  6. The Danish Industrial Foundations

    DEFF Research Database (Denmark)

    Thomsen, Steen

    and governed, what role it plays in the Danish economy, and how industrial foundation-owned companies perform. The book is the result of a large collaborative research project, led by the author, on industrial foundations. Some global companies such as IKEA, Robert Bosch or the Tata Group are foundation...

  7. Insurance industry guide

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is an insurance industry guide for the independent power industry. The directory includes the insurance company's name, address, telephone and FAX numbers and a description of the company's area of expertise, products and services, and limitations. The directory is international in scope. Some of the companies specialize in independent power projects

  8. Sustainable Industrial Production

    DEFF Research Database (Denmark)

    Christensen, Irene

    2015-01-01

    The purpose of this case is to create awareness about a somewhat unfamiliar industry that accounts for over €3 billion in Scandinavia and £5,6 billion in the UK, the Metals recycling industry. The case features a Scandinavian Company and includes several perspectives from managerial disciplines...

  9. Sustainable Industrial Production

    DEFF Research Database (Denmark)

    Brattebö, Helge; Jørgensen, Michael Søgaard; Lorentzen, Børge

    The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies.......The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies....

  10. Wanted! Industrial Hygienists.

    Science.gov (United States)

    Stilkind, Jerry

    1979-01-01

    Due to increased pressure (for example, from the Occupational Safety and Health Act) to create healthier/safer worker environments, the number of industrial hygienist positions has increased. Compares the need to the demand. Examines industrial hygienist salary ranges, expected educational background, job opportunities, and training program…

  11. Greening of Danish Industry

    DEFF Research Database (Denmark)

    Remmen, Arne

    2002-01-01

    The article outlines the major changes in the discourse on cleaner technology and on pollution prevention, together with policy instuments applied in the Danish industry.......The article outlines the major changes in the discourse on cleaner technology and on pollution prevention, together with policy instuments applied in the Danish industry....

  12. Nuclear industry takes off

    International Nuclear Information System (INIS)

    Du Plessis, A.; Stevens, R.C.B.

    1982-01-01

    For more than a decade irradiation sterilisation of medical and pharmaceutical products proved a highly successful semi-commercial operation at Pelindaba, until it made way recently for the first full-scale radiation processing industry in SA - a classic case of science transferring technology to industry

  13. ATLAS rewards industry

    CERN Document Server

    Maximilien Brice

    2006-01-01

    For contributing vital pieces to the ATLAS puzzle, three industries were recognized on Friday 5 May during a supplier awards ceremony. After a welcome and overview of the ATLAS experiment by spokesperson Peter Jenni, CERN Secretary-General Maximilian Metzger stressed the importance of industry to CERN's scientific goals. Picture 30 : representatives of the three award-wining companies after the ceremony

  14. Investigating ethnic minorities' perceptions of safety climate in the construction industry.

    Science.gov (United States)

    Chan, Albert P C; Wong, Francis K W; Hon, Carol K H; Lyu, Sainan; Javed, Arshad Ali

    2017-12-01

    An increasing number of ethnic minorities (EMs) have been employed in the construction industry to alleviate severe labor shortages in many countries. Unfortunately, statistics show that EMs have higher fatal and non-fatal occupational injury rates than their local counterparts. However, EMs are often underrepresented in safety climate (SC) research as they are difficult to reach and gauge their perception. A positive relationship has been widely found between SC and safety performance. Understanding the safety perceptions of EMs helps to reduce injuries and improve their safety performance. Based on a sample of 320 EMs from 20 companies in the construction industry, exploratory factor analysis (EFA) and confirmatory factor analysis (CFA) were used to identify the SC factors of EMs, and validate the extracted factors, respectively. Multivariate analysis of variance was undertaken to examine mean differences in perceptions of SC by personal characteristics. Three SC factors for EMs encapsulating 16 variables were identified through EFA. The hypothesized CFA model for a three-factor structure derived from EFA showed a satisfactory goodness-of-fit, composite reliability, and construct validity. Three SC factors were identified, namely: (a) safety management commitment, safety resources, and safety communication; (b) employee's involvement and workmate's influence; and (c) perception of safety rules, procedures and risks. The perceptions of SC differed significantly by nationality, marital status, the number of family members supported, and drinking habit. This study reveals the perception of EMs toward SC. The findings highlight the areas for safety improvement and provide leading indicators for safety performance of EMs. The findings are also enlightening for countries with a number of EMs, such as the United Sates, the United Kingdom, Australia, Singapore, and the Middle East. Copyright © 2017. Published by Elsevier Ltd.

  15. Uranium industry annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

  16. Indian refining industry

    International Nuclear Information System (INIS)

    Singh, I.J.

    2002-01-01

    The author discusses the history of the Indian refining industry and ongoing developments under the headings: the present state; refinery configuration; Indian capabilities for refinery projects; and reforms in the refining industry. Tables lists India's petroleum refineries giving location and capacity; new refinery projects together with location and capacity; and expansion projects of Indian petroleum refineries. The Indian refinery industry has undergone substantial expansion as well as technological changes over the past years. There has been progressive technology upgrading, energy efficiency, better environmental control and improved capacity utilisation. Major reform processes have been set in motion by the government of India: converting the refining industry from a centrally controlled public sector dominated industry to a delicensed regime in a competitive market economy with the introduction of a liberal exploration policy; dismantling the administered price mechanism; and a 25 year hydrocarbon vision. (UK)

  17. Erosão em compósitos à base de fibras de vidro/kevlar e resina epóxi de uso aeronáutico Erosion on composite materials based on glass and kevlar fibers/epoxy resin used in the aeronautical industry

    Directory of Open Access Journals (Sweden)

    Rogério A. Silva

    2003-01-01

    Full Text Available Este trabalho tem como objetivo principal o estudo e a análise da eficiência de dois diferentes tipos de recobrimentos usados na proteção contra o processo de desgaste por erosão em substratos fabricados em materiais compósitos poliméricos de uso aeronáutico, dando ênfase às peças fabricadas em fibras de vidro / kevlar impregnadas com resina epóxi. Revestimentos protetores baseados em um determinado tipo de tinta de poliuretano e um filme incolor de poliuretano foram utilizados para a avaliação da resistência à erosão, quando submetidos ao jateamento com microesferas de vidro. Para a realização dos ensaios de erosão foi projetado e construído um dispositivo específico para esse fim. Nos ensaios alguns fatores foram considerados, tais como: a natureza física das partículas abrasivas de microesferas de vidro, a distância, a velocidade e o ângulo de ataque das partículas durante o processo de jateamento. Os corpos-de-prova foram analisados quanto à sua variação de massa. Foram, também, utilizadas técnicas metalográficas na preparação de corpos-de-prova que foram analisados por microscopias óptica e eletrônica de varredura, assistida pela técnica de EDS, caracterizando o processo de erosão. Os resultados mostraram que os corpos-de-prova de compósitos poliméricos revestidos somente com a tinta de poliuretano apresentaram baixa resistência no ensaio de erosão. Entretanto, esta tinta quando protegida pelo filme incolor de poliuretano teve sua resistência à erosão aumentada na ordem de 5 vezes, aumentando, conseqüentemente, a vida útil do componente aeronáutico em sua aplicação final. Devido à facilidade de aplicação do filme de poliuretano no componente a ser protegido, os resultados deste estudo já estão sendo utilizados pelos fabricantes de aeronaves e operadores.The main goal of the present work is to evaluate the efficiency of two different coatings used as protection against the erosion wear

  18. Industrial<