WorldWideScience

Sample records for elimination strategy design

  1. Cancer risks: Strategies for elimination

    International Nuclear Information System (INIS)

    Bannasch, P.

    1987-01-01

    This book deals with the possibilities for identifying and eliminating cancer risk factors. The current state of knowledge on the detection, assessment and elimination of chemical, physical (radiation), and biological (viruses) risk factors are comprehensively presented in 15 contributions. Chemical risk factors resulting from smoking and environmental contamination are given special attention. The coverage of cancer risks by radiation includes some of the consequences of the Chernobyl disaster. Finally, the discussion of the possible risks that certain viruses hold for cancer in man is intended to further the development of vaccinations against these viral infections. The information is directed not only at specialists, but also at a wider interested audience. Its primary aim is to convey established findings that are already being used for cancer prevention. Furthermore, the book aims to promote more intense research in the field of primary cancer prevention. Contents: General aspects; chemical carcinogens: Risk assessment; chemical carcinogens: Primary prevention; physical carcinogens - Oncogenic viruses and subject index

  2. Strategy elimination in games with interaction structures

    NARCIS (Netherlands)

    Witzel, A.; Apt, K.R.; Zvesper, J.A.

    2009-01-01

    We study games in the presence of an interaction structure, which allows players to communicate their preferences, assuming that each player initially only knows his own preferences. We study the outcomes of iterated elimination of strictly dominated strategies (IESDS) that can be obtained in any

  3. Selective harmonic elimination strategy in eleven level inverter for PV system with unbalanced DC sources

    Science.gov (United States)

    Ghoudelbourk, Sihem.; Dib, D.; Meghni, B.; Zouli, M.

    2017-02-01

    The paper deals with the multilevel converters control strategy for photovoltaic system integrated in distribution grids. The objective of the proposed work is to design multilevel inverters for solar energy applications so as to reduce the Total Harmonic Distortion (THD) and to improve the power quality. The multilevel inverter power structure plays a vital role in every aspect of the power system. It is easier to produce a high-power, high-voltage inverter with the multilevel structure. The topologies of multilevel inverter have several advantages such as high output voltage, lower total harmonic distortion (THD) and reduction of voltage ratings of the power semiconductor switching devices. The proposed control strategy ensures an implementation of selective harmonic elimination (SHE) modulation for eleven levels. SHE is a very important and efficient strategy of eliminating selected harmonics by judicious selection of the firing angles of the inverter. Harmonics elimination technique eliminates the need of the expensive low pass filters in the system. Previous research considered that constant and equal DC sources with invariant behavior; however, this research extends earlier work to include variant DC sources, which are typical of lead-acid batteries when used in system PV. This Study also investigates methods to minimize the total harmonic distortion of the synthesized multilevel waveform and to help balance the battery voltage. The harmonic elimination method was used to eliminate selected lower dominant harmonics resulting from the inverter switching action.

  4. Tuberculosis 2015: burden, challenges and strategy for control and elimination

    Directory of Open Access Journals (Sweden)

    Mario Raviglione

    2016-06-01

    Full Text Available Tuberculosis (TB is a leading cause of morbidity and mortality worldwide, accounting for about 9.6 million new cases and 1.5 million deaths annually. The poorest and socially excluded groups carry the largest burden of disease, which makes it essential to properly address the social determinants of health through poverty reduction measures and targeted interventions on high-risk populations. The spread of multidrug-resistance TB requires special attention and highlights the need to foster research on TB diagnostics, new drugs and vaccines. Although many advances have been made in the fight against TB over the last twenty years, a lot is still needed to achieve global elimination. The new end-TB strategy that was first launched in 2014 by the World Health Organization, is fully in line with the seventeen Sustainable Development Goals that came into effect since January 2016 and sets ambitious goals for the post-2015 agenda. A 90% reduction in TB-related mortality and an 80% decline in TB incidence within 2030 as well as the abolition of catastrophic expenditures for TB-affected people are the main targets of this strategy. Strong government commitment and adequate financing from all countries together with community engagement and appropriate investments in research are necessary in order to reach these objectives.

  5. Optimising strategies for Plasmodium falciparum malaria elimination in Cambodia: primaquine, mass drug administration and artemisinin resistance.

    Directory of Open Access Journals (Sweden)

    Richard J Maude

    Full Text Available Malaria elimination requires a variety of approaches individually optimized for different transmission settings. A recent field study in an area of low seasonal transmission in South West Cambodia demonstrated dramatic reductions in malaria parasite prevalence following both mass drug administration (MDA and high treatment coverage of symptomatic patients with artemisinin-piperaquine plus primaquine. This study employed multiple combined strategies and it was unclear what contribution each made to the reductions in malaria.A mathematical model fitted to the trial results was used to assess the effects of the various components of these interventions, design optimal elimination strategies, and explore their interactions with artemisinin resistance, which has recently been discovered in Western Cambodia. The modelling indicated that most of the initial reduction of P. falciparum malaria resulted from MDA with artemisinin-piperaquine. The subsequent continued decline and near elimination resulted mainly from high coverage with artemisinin-piperaquine treatment. Both these strategies were more effective with the addition of primaquine. MDA with artemisinin combination therapy (ACT increased the proportion of artemisinin resistant infections, although much less than treatment of symptomatic cases with ACT, and this increase was slowed by adding primaquine. Artemisinin resistance reduced the effectiveness of interventions using ACT when the prevalence of resistance was very high. The main results were robust to assumptions about primaquine action, and immunity.The key messages of these modelling results for policy makers were: high coverage with ACT treatment can produce a long-term reduction in malaria whereas the impact of MDA is generally only short-term; primaquine enhances the effect of ACT in eliminating malaria and reduces the increase in proportion of artemisinin resistant infections; parasite prevalence is a better surveillance measure for

  6. Malaria programme personnel's experiences, perceived barriers and facilitators to implementing malaria elimination strategy in South Africa.

    Science.gov (United States)

    Hlongwana, Khumbulani Welcome; Sartorius, Benn; Tsoka-Gwegweni, Joyce

    2018-01-10

    South Africa has set an ambitious goal targeting to eliminate malaria by 2018, which is consistent with the United Nations Sustainable Development Goals' call to end the epidemic of malaria by 2030 across the globe. There are conflicting views regarding the feasibility of malaria elimination, and furthermore studies investigating malaria programme personnel's perspectives on strategy implementation are lacking. The study was a cross-sectional survey conducted in 2014 through a face-to-face investigator-administered semi-structured questionnaire to all eligible and consenting malaria programme personnel (team leader to senior manager levels) in three malaria endemic provinces (KwaZulu-Natal, Mpumalanga, and Limpopo) of South Africa. The overall response rate was 88.6% (148/167) among all eligible malaria personnel. The mean age of participants was 47 years (SD 9.7, range 27-70), and the mean work experience of 19.4 years (SD 11.1, range 0-42). The majority were male (78.4%), and 66.9% had secondary level education. Awareness of the malaria elimination policy was high (99.3%), but 89% contended that they were never consulted when the policy was formulated and few had either seen (29.9%) or read (23%) the policy, either in full or in part. Having read the policy was positively associated with professional job designations (managers, EHPs and entomologists) (p = 0.010) and tertiary level education (p = 0.042). There was a sentiment that the policy was neither sufficiently disseminated to all key healthcare workers (76.4%) nor properly adapted (68.9%) for the local operational context in the elimination strategy. Most (89.1%) participants were not optimistic about eliminating malaria by 2018, as they viewed the elimination strategy in South Africa as too theoretical with unrealistic targets. Other identified barriers included inadequate resources (53.5%) and high cross-border movements (19.8%). Most participants were not positive that South Africa could achieve

  7. Fault Management Design Strategies

    Science.gov (United States)

    Day, John C.; Johnson, Stephen B.

    2014-01-01

    Development of dependable systems relies on the ability of the system to determine and respond to off-nominal system behavior. Specification and development of these fault management capabilities must be done in a structured and principled manner to improve our understanding of these systems, and to make significant gains in dependability (safety, reliability and availability). Prior work has described a fundamental taxonomy and theory of System Health Management (SHM), and of its operational subset, Fault Management (FM). This conceptual foundation provides a basis to develop framework to design and implement FM design strategies that protect mission objectives and account for system design limitations. Selection of an SHM strategy has implications for the functions required to perform the strategy, and it places constraints on the set of possible design solutions. The framework developed in this paper provides a rigorous and principled approach to classifying SHM strategies, as well as methods for determination and implementation of SHM strategies. An illustrative example is used to describe the application of the framework and the resulting benefits to system and FM design and dependability.

  8. Empathic design: Research strategies

    Directory of Open Access Journals (Sweden)

    Joyce Thomas

    2013-01-01

    Full Text Available This paper explores the role of empathy within new product development from the perspective of human-centred design. The authors have developed a range of empathic design tools and strategies that help to identify authentic human needs.For products and services to be effective, they need to satisfy both functional and emotional needs of individuals. In addition, the individual user needs to feel that the product and/or service has been designed ‘just for them’, otherwise they may misuse, underuse or abandon the product/service. This becomes critical with a product such as a Zimmer frame (walker, when it fails to resonate with the patient due to any stigma the patient may perceive, and thus remains unused.When training young designers to consider the wider community (people unlike themselves during the design process, it has proven extremely valuable to take them outside their comfort zones, by seeking to develop empathy with the end user for whom they are designing. Empathic modelling offers designers the opportunity to develop greater insight and understanding, in order to support more effective design outcomes. Sensitising designers to the different ways that individuals complete daily tasks has helped to diminish the gap between themselves and others (e.g. people with disabilities.The authors intend for this paper to resonate with health care providers. Human-centred design can help to refocus the designer, by placing the individual end user’s needs at the heart of their decision-making.

  9. Empathic design: Research strategies.

    Science.gov (United States)

    Thomas, Joyce; McDonagh, Deana

    2013-01-01

    This paper explores the role of empathy within new product development from the perspective of human-centred design. The authors have developed a range of empathic design tools and strategies that help to identify authentic human needs.For products and services to be effective, they need to satisfy both functional and emotional needs of individuals. In addition, the individual user needs to feel that the product and/or service has been designed 'just for them', otherwise they may misuse, underuse or abandon the product/service. This becomes critical with a product such as a Zimmer frame (walker), when it fails to resonate with the patient due to any stigma the patient may perceive, and thus remains unused.When training young designers to consider the wider community (people unlike themselves) during the design process, it has proven extremely valuable to take them outside their comfort zones, by seeking to develop empathy with the end user for whom they are designing. Empathic modelling offers designers the opportunity to develop greater insight and understanding, in order to support more effective design outcomes. Sensitising designers to the different ways that individuals complete daily tasks has helped to diminish the gap between themselves and others (e.g. people with disabilities).The authors intend for this paper to resonate with health care providers. Human-centred design can help to refocus the designer, by placing the individual end user's needs at the heart of their decision-making.

  10. Optimum control strategy for phosphate elimination; Optimale Steuerstrategie zur Phosphatelimination

    Energy Technology Data Exchange (ETDEWEB)

    Heinrich, D.

    1997-12-31

    This study describes the most common phosphate elimination techniques. In the simplest cases, the chemicals are dosed according to previously established time curves. Nowadays, by contrast, dosage in proportion to quantity is largely preferred. Freight-proportional dosage will be more frequently employed in the future at plants for a population of more than 10000. Since investigations revealed that the results obtained using control systems are inferior to those obtained by means of automatic control systems, the latter are increasingly used. Even if PID control devices perform best, overshoot is not to be avoided with certainty because of the long dead time. According to the current state of knowledge, matched control and automatic control systems yield the best results. Further optimization can be achieved by driving them via a fuzzy-based system. (orig.) [Deutsch] In der vorliegenden Ausarbeitung wurden die gebraeuchlichsten Verfahren zur Phosphatelimination vorgestellt. In einfachsten Faellen wird die Dosierung nach festen Ganglinien vorgenommen. Sie wird heute weitgehend durch eine mengenproportionale Dosierung ersetzt. Frachtproportionale Dosierungen sind fuer Anlagen ueber 10.000 EW in Zukunft haeufiger zu finden. Nachdem die Untersuchungen gezeigt haben, dass Steuerungen nicht so gute Ergebnisse wie Reglungen ergaben, finden diese verstaerkt Anwendung. Auch wenn PID Regler das beste Ergebnis bringen, so kann mit Ihen wegen der langen Totzeiten ein Ueberschwingen nicht sicher vermieden werden. Nach heutiger Kenntnis erbringen aufeinander abgestimmte Steuer- und Reglungen die besten Ergebnisse. Werden sie ueber ein fuzzybasiertes System angesteuert, so ist eine weitere Optimierung gegeben. (orig.)

  11. Schistosomiasis elimination strategies and potential role of a vaccine in achieving global health goals.

    Science.gov (United States)

    Mo, Annie X; Agosti, Jan M; Walson, Judd L; Hall, B Fenton; Gordon, Lance

    2014-01-01

    In March 2013, the National Institute of Allergy and Infectious Diseases and the Bill and Melinda Gates Foundation co-sponsored a meeting entitled "Schistosomiasis Elimination Strategy and Potential Role of a Vaccine in Achieving Global Health Goals" to discuss the potential role of schistosomiasis vaccines and other tools in the context of schistosomiasis control and elimination strategies. It was concluded that although schistosomiasis elimination in some focal areas may be achievable through current mass drug administration programs, global control and elimination will face several significant scientific and operational challenges, and will require an integrated approach with other, additional interventions. These challenges include vector (snail) control; environmental modification; water, sanitation, and hygiene; and other future innovative tools such as vaccines. Defining a clear product development plan that reflects a vaccine strategy as complementary to the existing control programs to combat different forms of schistosomiasis will be important to develop a vaccine effectively.

  12. Design Optimization for a Maglev System Employing Flux Eliminating Coils

    Science.gov (United States)

    Davey, Kent R.

    1996-01-01

    Flux eliminating coils have received no little attention over the past thirty years as an alternative for realizing lift in a MAGLEV system. When the magnets on board the vehicle are displaced from the equilibrium or null flux point of these coils, they induce current in those coils which act to restore the coil to its null flux or centerline position. The question being addressed in this paper is that of how to choose the best coil for a given system. What appears at first glance to be an innocent question is in fact one that is actually quite involved, encompassing both the global economics and physics of the system. The real key in analyzing that question is to derive an optimization index or functional which represents the cost of the system subject to constraints, the primary constraint being that the vehicle lift itself at a certain threshold speed. Outlined in this paper is one scenario for realizing a total system design which uses sequential quadratic programming techniques.

  13. Tectonic design strategies

    DEFF Research Database (Denmark)

    Beim, Anne

    2000-01-01

    as the poetics of construction, thus it may be considered as an essential activity in the development of the architectural design process.  Similar to the complex nature of the tectonic, the design process is an ongoing movement of interpretation, mediation, and decision making where the skills of the architect...

  14. Engaging the private sector in malaria surveillance: a review of strategies and recommendations for elimination settings.

    Science.gov (United States)

    Bennett, Adam; Avanceña, Anton L V; Wegbreit, Jennifer; Cotter, Chris; Roberts, Kathryn; Gosling, Roly

    2017-06-14

    In malaria elimination settings, all malaria cases must be identified, documented and investigated. To facilitate complete and timely reporting of all malaria cases and effective case management and follow-up, engagement with private providers is essential, particularly in settings where the private sector is a major source of healthcare. However, research on the role and performance of the private sector in malaria diagnosis, case management and reporting in malaria elimination settings is limited. Moreover, the most effective strategies for private sector engagement in malaria elimination settings remain unclear. Twenty-five experts in malaria elimination, disease surveillance and private sector engagement were purposively sampled and interviewed. An extensive review of grey and peer-reviewed literature on private sector testing, treatment, and reporting for malaria was performed. Additional in-depth literature review was conducted for six case studies on eliminating and neighbouring countries in Southeast Asia and Southern Africa. The private health sector can be categorized based on their commercial orientation or business model (for-profit versus nonprofit) and their regulation status within a country (formal vs informal). A number of potentially effective strategies exist for engaging the private sector. Conducting a baseline assessment of the private sector is critical to understanding its composition, size, geographical distribution and quality of services provided. Facilitating reporting, referral and training linkages between the public and private sectors and making malaria a notifiable disease are important strategies to improve private sector involvement in malaria surveillance. Financial incentives for uptake of rapid diagnostic tests and artemisinin-based combination therapy should be combined with training and community awareness campaigns for improving uptake. Private sector providers can also be organized and better engaged through social

  15. Improving drug delivery strategies for lymphatic filariasis elimination in urban areas in Ghana.

    Directory of Open Access Journals (Sweden)

    Nana-Kwadwo Biritwum

    2017-05-01

    Full Text Available The Global Program to Eliminate Lymphatic Filariasis (GPELF advocates for the treatment of entire endemic communities, in order to achieve its elimination targets. LF is predominantly a rural disease, and achieving the required treatment coverage in these areas is much easier compared to urban areas that are more complex. In Ghana, parts of the Greater Accra Region with Accra as the capital city are also endemic for LF. Mass Drug Administration (MDA in Accra started in 2006. However, after four years of treatment, the coverage has always been far below the 65% epidemiologic coverage for interrupting transmission. As such, there was a need to identify the reasons for poor treatment coverage and design specific strategies to improve the delivery of MDA. This study therefore set out to identify the opportunities and barriers for implementing MDA in urban settings, and to develop appropriate strategies for MDA in these settings. An experimental, exploratory study was undertaken in three districts in the Greater Accra region. The study identified various types of non-rural settings, the social structures, stakeholders and resources that could be employed for MDA. Qualitative assessment such as in-depth interviews (IDIs and focus group discussions (FGDs with community leaders, community members, health providers, NGOs and other stakeholders in the community was undertaken. The study was carried out in three phases: pre-intervention, intervention and post-intervention phases, to assess the profile of the urban areas and identify reasons for poor treatment coverage using both qualitative and quantitative research methods. The outcomes from the study revealed that, knowledge, attitudes and practices of community members to MDA improved slightly from the pre-intervention phase to the post-intervention phase, in the districts where the interventions were readily implemented by health workers. Many factors such as adequate leadership, funding, planning and

  16. Designing concepts and strategies

    DEFF Research Database (Denmark)

    Kiib, Hans

    2012-01-01

    , that new developments often employ very modest research on the subject and often very little has been done in order to challenge traditional concepts and to invent new sustainable concepts for redevelopment. In order to avoid mistakes in urban redevelopment we need to learn from research and evaluation...... of the best planning practice. But what might be just as important is to learn from concept development practice, which can give us a comprehensive understanding of our complex cities and make us develop a way of experiencing the unique qualities of the architectural typologies at the site. Finally...... and strategies are briefly described in the article, and the adaption by city planners and developers has been critical reviewed....

  17. Design and CFD Simulation of the Drift Eliminators in Comparison with PIV Results

    Directory of Open Access Journals (Sweden)

    Stodůlka Jiří

    2015-01-01

    Full Text Available Drift eliminators are the essential part of all modern cooling towers preventing significant losses of liquid water escaping to the enviroment. These eliminators need to be effective in terms of water capture but on the other hand causing only minimal pressure loss as well. A new type of such eliminator was designed and numerically simulated using CFD tools. Results of the simulation are compared with PIV visulisation on the prototype model.

  18. Documenting handicap situations and eliminations through Universal Design patterns

    Directory of Open Access Journals (Sweden)

    Ann Heylighen

    2009-11-01

    Full Text Available According to contemporary academic and social insights,human functional limitations and handicaps are not exclusively the result of the physical and / or mental characteristics of the individual (medical model, but theycan just as well be a consequence of a maladjustment of the social and physical environment (conflict / social model.This radical reversal of focus from person to environment,or in other words, from the assessment that the person isimpeded to the insight that the physical and socialenvironment is an impediment, has far-reaching consequences for the designing of human-made environments.The recent Universal Design paradigm extends beyond accommodating ‘modal’ users and aims to include the realdiversity of user populations, including those with physical and / or mental impairments and functional limitations. To achieve this, a large amount of design information in connection with human dis-abilities (limitations andpossibilities is required.Together with prescriptive laws and regulations, designers need descriptive information about; on the one hand,CONFLICTS between users and built environments, and onthe other hand, empirically evident design RESOLUTIONS. In response to this need, the paper advances the development of specific Universal Design Patterns (UD Patterns in order to collect and organise this information for decision makers and for designers.

  19. Hepatitis B in sub-Saharan Africa: strategies to achieve the 2030 elimination targets.

    Science.gov (United States)

    Spearman, C Wendy; Afihene, Mary; Ally, Reidwaan; Apica, Betty; Awuku, Yaw; Cunha, Lina; Dusheiko, Geoffrey; Gogela, Neliswa; Kassianides, Chris; Kew, Michael; Lam, Philip; Lesi, Olufunmilayo; Lohouès-Kouacou, Marie-Jeanne; Mbaye, Papa Saliou; Musabeyezu, Emmanuel; Musau, Betty; Ojo, Olusegun; Rwegasha, John; Scholz, Barbara; Shewaye, Abate B; Tzeuton, Christian; Sonderup, Mark W

    2017-12-01

    The WHO global health sector strategy on viral hepatitis, created in May, 2016, aims to achieve a 90% reduction in new cases of chronic hepatitis B and C and a 65% reduction in mortality due to hepatitis B and C by 2030. Hepatitis B virus (HBV) is endemic in sub-Saharan Africa, and despite the introduction of universal hepatitis B vaccination and effective antiviral therapy, the estimated overall seroprevalence of hepatitis B surface antigen remains high at 6·1% (95% uncertainty interval 4·6-8·5). In this Series paper, we have reviewed the literature to examine the epidemiology, burden of liver disease, and elimination strategies of hepatitis B in sub-Saharan Africa. This paper reflects a supranational perspective of sub-Saharan Africa, and recommends several priority elimination strategies that address the need both to prevent new infections and to diagnose and treat chronic infections. The key to achieving these elimination goals in sub-Saharan Africa is the effective prevention of new infections via universal implementation of the HBV birth-dose vaccine, full vaccine coverage, access to affordable diagnostics to identify HBV-infected individuals, and to enable linkage to care and antiviral therapy. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Challenges and opportunities for T cell-mediated strategies to eliminate HIV reservoirs

    Directory of Open Access Journals (Sweden)

    Mark Alan Brockman

    2015-10-01

    Full Text Available HIV’s ability to establish latent reservoirs of reactivation-competent virus is the major barrier to cure. Shock and kill methods consisting of latency reversing agents (LRAs followed by elimination of reactivating cells through cytopathic effects are under active development. However, the clinical efficacy of LRAs remains to be established. Moreover, recent studies indicate that reservoirs may not be reduced efficiently by either viral cytopathic or CD8+ T-cell-mediated mechanisms. In this perspective, we highlight challenges to T-cell-mediated elimination of HIV reservoirs, including characteristics of responding T-cells, aspects of the cellular reservoirs and properties of the latent virus itself. We also discuss potential strategies to overcome these challenges by targeting the antiviral activity of T-cells towards appropriate viral antigens following latency.

  1. Designing programs for eliminating canine rabies from islands: Bali, Indonesia as a case study.

    Science.gov (United States)

    Townsend, Sunny E; Sumantra, I Putu; Pudjiatmoko; Bagus, Gusti Ngurah; Brum, Eric; Cleaveland, Sarah; Crafter, Sally; Dewi, Ayu P M; Dharma, Dewa Made Ngurah; Dushoff, Jonathan; Girardi, Janice; Gunata, I Ketut; Hiby, Elly F; Kalalo, Corlevin; Knobel, Darryn L; Mardiana, I Wayan; Putra, Anak Agung Gde; Schoonman, Luuk; Scott-Orr, Helen; Shand, Mike; Sukanadi, I Wayan; Suseno, Pebi Purwo; Haydon, Daniel T; Hampson, Katie

    2013-01-01

    Canine rabies is one of the most important and feared zoonotic diseases in the world. In some regions rabies elimination is being successfully coordinated, whereas in others rabies is endemic and continues to spread to uninfected areas. As epidemics emerge, both accepted and contentious control methods are used, as questions remain over the most effective strategy to eliminate rabies. The Indonesian island of Bali was rabies-free until 2008 when an epidemic in domestic dogs began, resulting in the deaths of over 100 people. Here we analyze data from the epidemic and compare the effectiveness of control methods at eliminating rabies. Using data from Bali, we estimated the basic reproductive number, R(0), of rabies in dogs, to be ~1 · 2, almost identical to that obtained in ten-fold less dense dog populations and suggesting rabies will not be effectively controlled by reducing dog density. We then developed a model to compare options for mass dog vaccination. Comprehensive high coverage was the single most important factor for achieving elimination, with omission of even small areas (Bali will not be achieved through achievable reductions in dog density. To ensure elimination, concerted high coverage, repeated, mass dog vaccination campaigns are necessary and the cooperation of all regions of the island is critical. Momentum is building towards development of a strategy for the global elimination of canine rabies, and this study offers valuable new insights about the dynamics and control of this disease, with immediate practical relevance.

  2. Designing Programs for Eliminating Canine Rabies from Islands: Bali, Indonesia as a Case Study

    Science.gov (United States)

    Townsend, Sunny E.; Sumantra, I Putu; Pudjiatmoko; Bagus, Gusti Ngurah; Brum, Eric; Cleaveland, Sarah; Crafter, Sally; Dewi, Ayu P. M.; Dharma, Dewa Made Ngurah; Dushoff, Jonathan; Girardi, Janice; Gunata, I Ketut; Hiby, Elly F.; Kalalo, Corlevin; Knobel, Darryn L.; Mardiana, I Wayan; Putra, Anak Agung Gde; Schoonman, Luuk; Scott–Orr, Helen; Shand, Mike; Sukanadi, I Wayan; Suseno, Pebi Purwo; Haydon, Daniel T.; Hampson, Katie

    2013-01-01

    Background Canine rabies is one of the most important and feared zoonotic diseases in the world. In some regions rabies elimination is being successfully coordinated, whereas in others rabies is endemic and continues to spread to uninfected areas. As epidemics emerge, both accepted and contentious control methods are used, as questions remain over the most effective strategy to eliminate rabies. The Indonesian island of Bali was rabies-free until 2008 when an epidemic in domestic dogs began, resulting in the deaths of over 100 people. Here we analyze data from the epidemic and compare the effectiveness of control methods at eliminating rabies. Methodology/Principal Findings Using data from Bali, we estimated the basic reproductive number, R 0, of rabies in dogs, to be ∼1·2, almost identical to that obtained in ten–fold less dense dog populations and suggesting rabies will not be effectively controlled by reducing dog density. We then developed a model to compare options for mass dog vaccination. Comprehensive high coverage was the single most important factor for achieving elimination, with omission of even small areas (<0.5% of the dog population) jeopardizing success. Parameterizing the model with data from the 2010 and 2011 vaccination campaigns, we show that a comprehensive high coverage campaign in 2012 would likely result in elimination, saving ∼550 human lives and ∼$15 million in prophylaxis costs over the next ten years. Conclusions/Significance The elimination of rabies from Bali will not be achieved through achievable reductions in dog density. To ensure elimination, concerted high coverage, repeated, mass dog vaccination campaigns are necessary and the cooperation of all regions of the island is critical. Momentum is building towards development of a strategy for the global elimination of canine rabies, and this study offers valuable new insights about the dynamics and control of this disease, with immediate practical relevance. PMID:23991233

  3. Measles epidemic in Brazil in the post-elimination period: Coordinated response and containment strategies.

    Science.gov (United States)

    Lemos, Daniele Rocha Queiroz; Franco, Aidée Ramirez; de Sá Roriz, Maria Lúcia Feitosa; Carneiro, Ana Karine Borges; de Oliveira Garcia, Márcio Henrique; de Souza, Fábia Lidiana; Duron Andino, Regina; de Góes Cavalcanti, Luciano Pamplona

    2017-03-23

    The measles virus circulation was halted in Brazil in 2001 and the country has a routine vaccination coverage against measles, mumps and rubella higher than 95%. In Ceará, the last confirmed case was in 1999. This article describes the strategies adopted and the effectiveness of surveillance and control measures implemented during a measles epidemic in the post-elimination period. The epidemic started in December 2013 and lasted 20 months, reaching 38 cities and 1,052 confirmed cases. The D8 genotype was identified. More than 50,000 samples were tested for measles and 86.4% of the confirmed cases had a laboratory diagnosis. The beginning of an campaign vaccination was delayed in part by the availability of vaccine. The classic control measures were not enough to control the epidemic. The creation of a committee of experts, the agreement signed between managers of the three spheres of government, the conducting of an institutional active search of suspected cases, vaccination door to door at alternative times, the use of micro planning, a broad advertising campaign at local media and technical operative support contributed to containing the epidemic. It is important to recognize the possibility of epidemics at this stage of post-elimination and prepare a sensitive surveillance system for timely response. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Intervention strategies to eliminate truck-related fatalities in surface coal mining in West Virginia.

    Science.gov (United States)

    Zhang, Meng; Kecojevic, Vladislav

    2016-01-01

    The main objective of this review was to build upon a previous study on the root causes of truck-related fatalities in surface coal mining operations in West Virginia, and to develop intervention strategies to eliminate these fatalities. This review considers a two-pronged approach to accident prevention: one that is fundamental and traditional (safety regulations, training and education, and engineering of the work environment); and one that is innovative and creative (e.g., applying technological advances to better control and eliminate the root causes of accidents). Suggestions for improving current training and education system are proposed, and recommendations are provided on improving the safety of mine working conditions, specifically safety conditions on haul roads, dump sites, and loading areas. We also discuss various currently available technologies that can help prevent haul truck-related fatal accidents. The results of this review should be used by mine personnel to help create safer working conditions and decrease truck-related fatalities in surface coal mining.

  5. Getting the "Kill" into "Shock and Kill": Strategies to Eliminate Latent HIV.

    Science.gov (United States)

    Kim, Youry; Anderson, Jenny L; Lewin, Sharon R

    2018-01-10

    Despite the success of antiretroviral therapy (ART), there is currently no HIV cure and treatment is life long. HIV persists during ART due to long-lived and proliferating latently infected CD4+ T cells. One strategy to eliminate latency is to activate virus production using latency reversing agents (LRAs) with the goal of triggering cell death through virus-induced cytolysis or immune-mediated clearance. However, multiple studies have demonstrated that activation of viral transcription alone is insufficient to induce cell death and some LRAs may counteract cell death by promoting cell survival. Here, we review new approaches to induce death of latently infected cells through apoptosis and inhibition of pathways critical for cell survival, which are often hijacked by HIV proteins. Given advances in the commercial development of compounds that induce apoptosis in cancer chemotherapy, these agents could move rapidly into clinical trials, either alone or in combination with LRAs, to eliminate latent HIV infection. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Matrix precipitation: a general strategy to eliminate matrix interference for pharmaceutical toxic impurities analysis.

    Science.gov (United States)

    Yang, Xiaojing; Xiong, Xuewu; Cao, Ji; Luan, Baolei; Liu, Yongjun; Liu, Guozhu; Zhang, Lei

    2015-01-30

    Matrix interference, which can lead to false positive/negative results, contamination of injector or separation column, incompatibility between sample solution and the selected analytical instrument, and response inhibition or even quenching, is commonly suffered for the analysis of trace level toxic impurities in drug substance. In this study, a simple matrix precipitation strategy is proposed to eliminate or minimize the above stated matrix interference problems. Generally, a sample of active pharmaceutical ingredients (APIs) is dissolved in an appropriate solvent to achieve the desired high concentration and then an anti-solvent is added to precipitate the matrix substance. As a result, the target analyte is extracted into the mixed solution with very less residual of APIs. This strategy has the characteristics of simple manipulation, high recovery and excellent anti-interference capability. It was found that the precipitation ratio (R, representing the ability to remove matrix substance) and the proportion of solvent (the one used to dissolve APIs) in final solution (P, affecting R and also affecting the method sensitivity) are two important factors of the precipitation process. The correlation between R and P was investigated by performing precipitation with various APIs in different solvent/anti-solvent systems. After a detailed mathematical reasoning process, P=20% was proved to be an effective and robust condition to perform the precipitation strategy. The precipitation method with P=20% can be used as a general strategy for toxic impurity analysis in APIs. Finally, several typical examples are described in this article, where the challenging matrix interference issues have been resolved successfully. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Accelerating to Zero: Strategies to Eliminate Malaria in the Peruvian Amazon

    Science.gov (United States)

    Quispe, Antonio M.; Llanos-Cuentas, Alejandro; Rodriguez, Hugo; Clendenes, Martin; Cabezas, Cesar; Leon, Luis M.; Chuquiyauri, Raul; Moreno, Marta; Kaslow, David C.; Grogl, Max; Herrera, Sócrates; Magill, Alan J.; Kosek, Margaret; Vinetz, Joseph M.; Lescano, Andres G.; Gotuzzo, Eduardo

    2016-01-01

    In February 2014, the Malaria Elimination Working Group, in partnership with the Peruvian Ministry of Health (MoH), hosted its first international conference on malaria elimination in Iquitos, Peru. The 2-day meeting gathered 85 malaria experts, including 18 international panelists, 23 stakeholders from different malaria-endemic regions of Peru, and 11 MoH authorities. The main outcome was consensus that implementing a malaria elimination project in the Amazon region is achievable, but would require: 1) a comprehensive strategic plan, 2) the altering of current programmatic guidelines from control toward elimination by including symptomatic as well as asymptomatic individuals for antimalarial therapy and transmission-blocking interventions, and 3) the prioritization of community-based active case detection with proper rapid diagnostic tests to interrupt transmission. Elimination efforts must involve key stakeholders and experts at every level of government and include integrated research activities to evaluate, implement, and tailor sustainable interventions appropriate to the region.

  8. Enhancing Community Knowledge and Health Behaviors to Eliminate Blinding Trachoma in Mali Using Radio Messaging as a Strategy

    Science.gov (United States)

    Bamani, Sanoussi; Toubali, Emily; Diarra, Sadio; Goita, Seydou; Berte, Zana; Coulibaly, Famolo; Sangare, Hama; Tuinsma, Marjon; Zhang, Yaobi; Dembele, Benoit; Melvin, Palesa; MacArthur, Chad

    2013-01-01

    The National Blindness Prevention Program in Mali has broadcast messages on the radio about trachoma as part of the country's trachoma elimination strategy since 2008. In 2011, a radio impact survey using multi-stage cluster sampling was conducted in the regions of Kayes and Segou to assess radio listening habits, coverage of the broadcasts,…

  9. Parametric Design Strategies for Collaborative Urban Design

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Yıldırım, Miray Baş; Özkar, Mine

    2013-01-01

    to the collaboration between professionals, participation by different non-professional stakeholders, such as residents, local authorities, non-governmental organizations and investors, is another important component of collaborative urban design processes. The involvement of community in decision making process...... implications of planning and design decisions, unless they are presented with relatively detailed architectural models, whether physical or virtual. This however, typically presents steep demands in terms of time and resources. As a foundation for our work with parametric urban design lies the hypothesis...... to solve different scripting challenges. The paper is organized into an introduction, three main sections and closing section with conclusions and perspectives. The first section of the paper gives a theoretical discussion of the notion of collaborative design and the challenges of collaborative urban...

  10. Iterative Prototyping of Strategy Implementation Workshop Design

    DEFF Research Database (Denmark)

    Kryger, Anders

    2018-01-01

    Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

  11. Towards the elimination of chronic viral hepatitis in Europe : prevalence, risk groups and screening strategies

    NARCIS (Netherlands)

    A. Falla (Abby)

    2018-01-01

    markdownabstractThis thesis aims to contribute strategic information towards the elimination of chronic viral hepatitis in the European Union/European Economic Area (EU/EEA). Many EU/EEA countries have successfully controlled the transmission of HBV/HCV and the incidence of new infections is

  12. Radiotracer design strategies for neurocardiology

    International Nuclear Information System (INIS)

    Wieland, D.M.; Hutchins, G.D.

    1991-01-01

    Nuclear cardiologists have expended an inordinate amount of effort studying the open-quotes plumbingclose quotes of the heart but very little effort on the open-quotes wiringclose quotes. L. Rossi declared in 1988, open-quotes today's desultory information about basic changes in the heart's innervation, if compared with current knowledge about diseases of cardiac muscle and vessels, is largely attributable to an aura of forbidding technical difficulty.close-quote During the past three years, radiotracers have been developed for use in studies of cardiac nerve function by positron emission tomography (PET). The first clinical PET studies in this area were reported in 1990. This chapter discusses the strategies that led to the tracers presently available and the possible nature of future neuronal markers

  13. New strategy for eliminating zero-sequence circulating current between parallel operating three-level NPC voltage source inverters

    DEFF Research Database (Denmark)

    Li, Kai; Dong, Zhenhua; Wang, Xiaodong

    2018-01-01

    A novel strategy based on a zero common mode voltage pulse-width modulation (ZCMV-PWM) technique and zero-sequence circulating current (ZSCC) feedback control is proposed in this study to eliminate ZSCCs between three-level neutral point clamped (NPC) voltage source inverters, with common AC and DC......, the ZCMV-PWM method is presented to reduce CMVs, and a simple electric circuit is adopted to control ZSCCs and neutral point potential. Finally, simulation and experiment are conducted to illustrate effectiveness of the proposed strategy. Results show that ZSCCs between paralleled inverters can...

  14. The 16-Year Evolution of Proximal Modular Stem DesignEliminating Failure of Modular Junction

    Directory of Open Access Journals (Sweden)

    Thomas Tkach

    2017-10-01

    Full Text Available Background: The complexity of hip reconstruction has been and continues to be a perplexing problem with restoring leg length, femoral offset, joint stability and overall hip implant fixation. These were contributing factors that lead to the development of a novel proximal femoral component design “Apex Modular Stem” (Omni, Raynham, MA. The basic stem geometry features a straight stem with a metaphyseal fit and fill cone, a medial triangle and a modular neck junction that allows for version and offset adjustment. In recent years, there has been great concern with the use of modularity in total hip arthroplasty. The goals of this study are (1 to identify complications with the use of a proximal modular design and (2 demonstrated factors that have eliminated those complications. Methods: This is a retrospective study of a single surgeon series (Design A and Design B of using the same cementless stem and proximal modular neck body (Apex Modular Stem and Omni Mod Hip Stem from 2000 to 2016 totaling 2,125 stems. 483 stems were the Design A and 1,642 stems, were of the Design B style. Results: Design A, 483 stems were implanted between 2000 and 2004. 31 alignment pins sheared resulting in a revision rate of 6.4%. Design B, 1,642 stems have been implanted between 2004 and 2016 all by the same surgeon, with no failures of the modular junction. Conclusion: All implant devices entail a multitude of risks and benefits. The Apex Modular Stem (Design A, provided excellent fixation, minimal risk of modular junction  corrosion, and simple control of anteversion and femoral offset. The limitation was found to be the risk of the alignment pin shearing (6.4%. The pin was enlarged to make it 225% stronger in torsional resistance, and in a subsequent series of over 1,600 femoral stems in a single surgeon series, there were no pin failures over a 12 year duration.

  15. Antiviral strategies to eliminate hepatitis B virus covalently closed circular DNA (cccDNA).

    Science.gov (United States)

    Revill, Peter; Locarnini, Stephen

    2016-10-01

    It has been over 50 years since the discovery of hepatitis B virus (HBV), yet 240 million people worldwide live with chronic HBV, resulting in up to 800000 deaths per year. A cure is yet to be achieved, due largely to a viral nuclear reservoir of transcriptionally active covalently closed circular DNA (cccDNA). While current antiviral therapies are effective at reducing viral replication, they have no impact on the existing cccDNA reservoir. Identifying mechanisms to either eliminate (complete cure) or inactivate (functional cure) HBV cccDNA are a major focus of HBV research worldwide. This review discusses recent advances in efforts to eliminate and/or regulate cccDNA, as well as future directions that may be considered in efforts to cure chronic HBV. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

  16. Targeting imported malaria through social networks: a potential strategy for malaria elimination in Swaziland.

    Science.gov (United States)

    Koita, Kadiatou; Novotny, Joseph; Kunene, Simon; Zulu, Zulizile; Ntshalintshali, Nyasatu; Gandhi, Monica; Gosling, Roland

    2013-06-27

    Swaziland has made great progress towards its goal of malaria elimination by 2015. However, malaria importation from neighbouring high-endemic Mozambique through Swaziland's eastern border remains a major factor that could prevent elimination from being achieved. In order to reach elimination, Swaziland must rapidly identify and treat imported malaria cases before onward transmission occurs. A nationwide formative assessment was conducted over eight weeks to determine if the imported cases of malaria identified by the Swaziland National Malaria Control Programme could be linked to broader social networks and to explore methods to access these networks. Using a structured format, interviews were carried out with malaria surveillance agents (6), health providers (10), previously identified imported malaria cases (19) and people belonging to the networks identified through these interviews (25). Most imported malaria cases were Mozambicans (63%, 12/19) making a living in Swaziland and sustaining their families in Mozambique. The majority of imported cases (73%, 14/19) were labourers and self-employed contractors who travelled frequently to Mozambique to visit their families and conduct business. Social networks of imported cases with similar travel patterns were identified through these interviews. Nearly all imported cases (89%, 17/19) were willing to share contact information to enable network members to be interviewed. Interviews of network members and key informants revealed common congregation points, such as the urban market places in Manzini and Malkerns, as well as certain bus stations, where people with similar travel patterns and malaria risk behaviours could be located and tested for malaria. This study demonstrated that imported cases of malaria belonged to networks of people with similar travel patterns. This study may provide novel methods for screening high-risk groups of travellers using both snowball sampling and time-location sampling of networks to

  17. Prevalence of chronic hepatitis B virus infection and infrastructure for its diagnosis in Madagascar: implication for the WHO's elimination strategy.

    Science.gov (United States)

    Andriamandimby, Soa Fy; Olive, Marie-Marie; Shimakawa, Yusuke; Rakotomanana, Fanjasoa; Razanajatovo, Iony Manitra; Andrianinarivomanana, Tsarasoa Malala; Ravalohery, Jean-Pierre; Andriamamonjy, Seta; Rogier, Christophe; Héraud, Jean-Michel

    2017-08-04

    WHO developed a global strategy to eliminate hepatitis B by 2030 and set target to treat 80% of people with chronic hepatitis B virus (HBV) infection eligible for antiviral treatment. As a first step to achieve this goal, it is essential to conduct a situation analysis that is fundamental to designing national hepatitis plans. We therefore estimated the prevalence of chronic HBV infection, and described the existing infrastructure for HBV diagnosis in Madagascar. We conducted a stratified multi-stage serosurvey of hepatitis B surface antigen (HBsAg) in adults aged ≥18 years using 28 sentinel surveillance sites located throughout the country. We obtained the list of facilities performing HBV testing from the Ministry of Health, and contacted the person responsible at each facility. A total of 1778 adults were recruited from the 28 study areas. The overall weighted seroprevalence of HBsAg was 6.9% (95% CI: 5.6-8.6). Populations with a low socio-economic status and those living in rural areas had a significantly higher seroprevalence of HBsAg. The ratio of facilities equipped to perform HBsAg tests per 100,000 inhabitants was 1.02 in the capital city of Antananarivo and 0.21 outside the capital. There were no facilities with the capacity to perform HBV DNA testing or transient elastography to measure liver fibrosis. There are only five hepatologists in Madagascar. Madagascar has a high-intermediate level of endemicity for HBV infection with a severely limited capacity for its diagnosis and treatment. Higher HBsAg prevalence in rural or underprivileged populations underlines the importance of a public health approach to decentralize the management of chronic HBV carriers in Madagascar by using simple and low-cost diagnostic tools.

  18. Advanced gas-emission anode design for microfluidic fuel cell eliminating bubble accumulation

    International Nuclear Information System (INIS)

    Zhang, Hao; Xuan, Jin; Wang, Huizhi; Leung, Dennis Y C; Xu, Hong; Zhang, Li

    2017-01-01

    A microfluidic fuel cell is a low cost, easily fabricated energy device and is considered a promising energy supplier for portable electronics. However, the currently developed microfluidic fuel cells that are fed with hydrocarbon fuels are confronted with a bubble problem especially when operating at high current density conditions. In this work, a gas-emission anode is presented to eliminate the gas accumulation at the anode. This gas-emission anode is verified as a valid design for discharging gaseous products, which is especially beneficial for stable operation of microfluidic fuel cells. The electrochemical performance of a counter-flow microfluidic fuel cell equipped with a gas-emission anode was measured. The results indicate that the specific design of the gas-emission anode is essential for reducing the oxygen reduction reaction parasitic effect at the anode. Fuel utilization of 76.4% was achieved at a flow rate of 0.35 µ l min −1 . Current–voltage curves of single electrodes were measured and the parasitic effect at the anode was identified as the main performance limiting factor in the presented anode design. (paper)

  19. Change of strategy is required for malaria elimination: a case study in Purworejo District, Central Java Province, Indonesia.

    Science.gov (United States)

    Murhandarwati, E Elsa Herdiana; Fuad, Anis; Sulistyawati; Wijayanti, Mahardika Agus; Bia, Michael Badi; Widartono, Barandi Sapta; Kuswantoro; Lobo, Neil F; Supargiyono; Hawley, William A

    2015-08-16

    Malaria has been targeted for elimination from Indonesia by 2030, with varying timelines for specific geographical areas based on disease endemicity. The regional deadline for malaria elimination for Java island, given the steady decrease of malaria cases, was the end of 2015. Purworejo District, a malaria-endemic area in Java with an annual parasite incidence (API) of 0.05 per 1,000 population in 2009, aims to enter this elimination stage. This study documents factors that affect incidence and spatial distribution of malaria in Purworejo, such as geomorphology, topography, health system issues, and identifies potential constraints and challenges to achieve the elimination stage, such as inter-districts coordination, decentralization policy and allocation of financial resources for the programme. Historical malaria data from 2007 to 2011 were collected through secondary data, in-depth interviews and focus group discussions during study year (2010-2011). Malaria cases were mapped using the village-centroid shape file to visualize its distribution with geomorphologic characteristics overlay and spatial distribution of malaria. API in each village in Purworejo and its surrounding districts from 2007 to 2011 was stratified into high, middle or low case incidence to show the spatiotemporal mapping pattern. The spatiotemporal pattern of malaria cases in Purworejo and the adjacent districts demonstrate repeated concentrated occurrences of malaria in specific areas from 2007 to 2011. District health system issues, i.e., suboptimal coordination between primary care and referral systems, suboptimal inter-district collaboration for malaria surveillance, decentralization policy and the lack of resources, especially district budget allocations for the malaria programme, were major constraints for programme sustainability. A new malaria elimination approach that fits the local disease transmission, intervention and political system is required. These changes include timely

  20. A Strategy for Uncertainty Visualization Design

    Science.gov (United States)

    2009-10-01

    143–156, Magdeburg , Germany . [11] Thomson, J., Hetzler, E., MacEachren, A., Gahegan, M. and Pavel, M. (2005), A Typology for Visualizing Uncertainty...and Stasko [20] to bridge analytic gaps in visualization design, when tasks in the strategy overlap (and therefore complement) design frameworks

  1. Multimedia Matrix: A Cognitive Strategy for Designers.

    Science.gov (United States)

    Sherry, Annette C.

    This instructional development project evaluates the effect of a matrix-based strategy to assist multimedia authors in acquiring and applying principles for effective multimedia design. The Multimedia Matrix, based on the Park and Hannafin "Twenty Principles and Implications for Interactive Multimedia" design, displays a condensed…

  2. Strategy for elimination of iodine deficiency in Belarus: evaluation of 10 years experience

    Directory of Open Access Journals (Sweden)

    V I Kachan

    2010-09-01

    Full Text Available Article presents results of implementation of successful program of elimination of iodine deficiency in Belarus. Government decree (2001 requires mandatory use of iodized salt in food industry and public catering. While retail trade of non-iodized salt is not prohibited, all foods shops must have iodized salt on sale. All these measures resulted in increase of iodized salt consumption: 94% of house-holds in Belarus were using iodized salt. Iodine nutrition of population also sig-nificantly improved: median urinary iodine levels in general population (school-children reached 169 mcg/l and in pregnant women – 224 mcg/l. Endemic goiter morbidity decreased significantly in children, adolescents and adults as well as frequency of transitory thyroid dysfunctions in newborns. Belarus experience in prevention of iodine deficiency can be used by other industrialized countries of Europe and rest of the world.

  3. A preliminary design study of a pool-type FBR 'ARES' eliminating intermediate heat transport systems

    International Nuclear Information System (INIS)

    Ueda, N.; Nishi, Y.; Kinoshita, I.; Yoshida, K.

    2001-01-01

    An innovative reactor concept 'ARES' (Advanced Reactor Eliminating Secondary system) is proposed to aim at reducing the construction cost of a liquid metal cooled fast breeder reactor (LMFBR). This concept is developed to show the ultimate cost down potential of LMFBR's at their commercial stage. The electrical output is 1500 MW, while the thermal output is 3900 MW. Main components of the primary cooling system are four electromagnetic pumps (EMP) and eight double-wall-tube steam generators (SG). Both of them are installed in a reactor vessel like pool type LMFBR's. An intermediate heat transport system which a previous LMFBR has it eliminated, main components of which are intermediate heat exchangers (IHX), secondary pumps and secondary piping. Further, a high reliable SG could decrease the occurrence of water leak accidents and reduce the related mitigation systems. In this study, structure concept, approach to embody a high reliable SG and accidents analyses are carried out. Flow path configuration is mainly discussed in investigation of the structure concept. In case of a water leak accident in a SG, the fault SG must be isolated to prevent a reaction production from flowing into the core. The measure to cut both inlet and outlet coolant flow paths by siphon-break mechanism is adopted to be consistent with the decay heat removal operation. The safety design approach of the double-wall-tube SG is investigated to limit the accident occurrence below 10 -7 (1/ry). A tube-to-tube weld is excluded from the reference design, because the welding process is too difficult and complicated to prevent adhesion of the double-wall-tube effectively. The reliability of the tube-to-tube-sheet was evaluated as 10 -10 (1/hr) for an inner tube and 10 -9 (1/hr) for an outer tube with reference to the failure experience of previous SG's. The failure must be detected within 60 to 120 minutes. Finally, a seamless U tube type of double-wall-tube SG is adopted. Transient events due to

  4. Design Strategies for Aptamer-Based Biosensors

    Science.gov (United States)

    Han, Kun; Liang, Zhiqiang; Zhou, Nandi

    2010-01-01

    Aptamers have been widely used as recognition elements for biosensor construction, especially in the detection of proteins or small molecule targets, and regarded as promising alternatives for antibodies in bioassay areas. In this review, we present an overview of reported design strategies for the fabrication of biosensors and classify them into four basic modes: target-induced structure switching mode, sandwich or sandwich-like mode, target-induced dissociation/displacement mode and competitive replacement mode. In view of the unprecedented advantages brought about by aptamers and smart design strategies, aptamer-based biosensors are expected to be one of the most promising devices in bioassay related applications. PMID:22399891

  5. New strategy for eliminating zero-sequence circulating current between parallel operating three-level NPC voltage source inverters

    DEFF Research Database (Denmark)

    Li, Kai; Dong, Zhenhua; Wang, Xiaodong

    2018-01-01

    buses, that are operating in parallel. First, an equivalent model of ZSCC in a three-phase three-level NPC inverter paralleled system is developed. Second, on the basis of the analysis of the excitation source of ZSCCs, i.e., the difference in common mode voltages (CMVs) between paralleled inverters......, the ZCMV-PWM method is presented to reduce CMVs, and a simple electric circuit is adopted to control ZSCCs and neutral point potential. Finally, simulation and experiment are conducted to illustrate effectiveness of the proposed strategy. Results show that ZSCCs between paralleled inverters can...... be eliminated effectively under steady and dynamic states. Moreover, the proposed strategy exhibits the advantage of not requiring carrier synchronization. It can be utilized in inverters with different types of filter....

  6. Study, analysis and design of plasma torch for the elimination of hospital wastes in Chile

    International Nuclear Information System (INIS)

    Diaz Ramirez, Ximena Jesus

    2014-01-01

    Within the field of new technologies in industry, the use of plasma is notable for its high speed of expansion and development. Currently one of its uses is the elimination of waste as it allows to avoid problems such as the formation of airborne byproducts and hazardous solids that represent a serious problem for the environment and human health. Plasma, when it is at extreme temperatures above 3,000 Celsius, causes inorganic waste to disintegrate and to vitrify on a solid residue while organic waste is converted into gases. Unlike any other thermal treatment of waste (incineration, gasification, pyrolysis, etc.) and because it is not a combustion process, but atomization of matter, no pollutant emissions into the atmosphere (dioxins and similar) or ash, there are only simple gases and an inert solid completely vitrified that can be used in the construction, for the obtaining of urban furniture, as decorative element, for example. The project proposes to develop an experimental device, laboratory plasma torch, to investigate its application in the reduction of hospital waste. It is expected to model, design and construct an experimental device that produces a plasma jet, whose temperature is adequate to perform hospital waste treatments at the laboratory level. The main objective of the project is to contribute to the generation of knowledge in the field of hospital waste reduction through the use of technological applications of plasmas, generating the necessary research for the study of art and technological development at the experimental level in the indicated field

  7. Steel framing strategies for highly skewed bridges to reduce/eliminate distortion near skewed supports.

    Science.gov (United States)

    2014-05-01

    Different problems in straight skewed steel I-girder bridges are often associated with the methods used for detailing the cross-frames. Use of theoretical terms to describe these detailing methods and absence of complete and simplified design approac...

  8. Food design strategies to increase vegetable intake

    NARCIS (Netherlands)

    Oliviero, Teresa; Fogliano, Vincenzo

    2016-01-01

    Background: Public campaigns promoting consumption of fruits and vegetables had limited results as consumers habits are difficult to modify. The incorporation of fruits and vegetables into regularly eaten products is a food design strategy that leads to several advantages. Pasta is a staple food

  9. Minimum Abutment Height to Eliminate Bone Loss: Influence of Implant Neck Design and Platform Switching.

    Science.gov (United States)

    Spinato, Sergio; Galindo-Moreno, Pablo; Bernardello, Fabio; Zaffe, Davide

    This retrospective study quantitatively analyzed the minimum prosthetic abutment height to eliminate bone loss after 4.7-mm-diameter implant placement in maxillary bone and how grafting techniques can affect the marginal bone loss in implants placed in maxillary areas. Two different implant types with a similar neck design were singularly placed in two groups of patients: the test group, with platform-switched implants, and the control group, with conventional (non-platform-switched) implants. Patients requiring bone augmentation underwent unilateral sinus augmentation using a transcrestal technique with mineralized xenograft. Radiographs were taken immediately after implant placement, after delivery of the prosthetic restoration, and after 12 months of loading. The average mesial and distal marginal bone loss of the control group (25 patients) was significantly more than twice that of the test group (26 patients), while their average abutment height was similar. Linear regression analysis highlighted a statistically significant inverse relationship between marginal bone loss and abutment height in both groups; however, the intercept of the regression line, both mesially and distally, was 50% lower for the test group than for the control group. The marginal bone loss was annulled with an abutment height of 2.5 mm for the test group and 3.0 mm for the control group. No statistically significant differences were found regarding marginal bone loss of implants placed in native maxillary bone compared with those placed in the grafted areas. The results suggest that the shorter the abutment height, the greater the marginal bone loss in cement-retained prostheses. Abutment height showed a greater influence in platform-switched than in non-platform-switched implants on the limitation of marginal bone loss.

  10. Operational strategies of anti-malarial drug campaigns for malaria elimination in Zambia's southern province: a simulation study.

    Science.gov (United States)

    Stuckey, Erin M; Miller, John M; Littrell, Megan; Chitnis, Nakul; Steketee, Rick

    2016-03-09

    Malaria elimination requires reducing both the potential of mosquitoes to transmit parasites to humans and humans to transmit parasites to mosquitoes. To achieve this goal in Southern province, Zambia a mass test and treat (MTAT) campaign was conducted from 2011-2013 to complement high coverage of long-lasting insecticide-treated nets (LLIN). To identify factors likely to increase campaign effectiveness, a modelling approach was applied to investigate the simulated effect of alternative operational strategies for parasite clearance in southern province. OpenMalaria, a discrete-time, individual-based stochastic model of malaria, was parameterized for the study area to simulate anti-malarial drug administration for interruption of transmission. Simulations were run for scenarios with a range of artemisinin-combination therapies, proportion of the population reached by the campaign, targeted age groups, time between campaign rounds, Plasmodium falciparum test protocols, and the addition of drugs aimed at preventing onward transmission. A sensitivity analysis was conducted to assess uncertainty of simulation results. Scenarios were evaluated based on the reduction in all-age parasite prevalence during the peak transmission month one year following the campaign, compared to the currently-implemented strategy of MTAT 19 % population coverage at pilot and 40 % coverage during the first year of implementation in the presence of 56 % LLIN use and 18 % indoor residual spray coverage. Simulation results suggest the most important determinant of success in reducing prevalence is the population coverage achieved in the campaign, which would require more than 1 year of campaign implementation for elimination. The inclusion of single low-dose primaquine, which acts as a gametocytocide, or ivermectin, which acts as an endectocide, to the drug regimen did not further reduce parasite prevalence one year following the campaign compared to the currently-implemented strategy

  11. Chronic viral hepatitis: policy, regulation, and strategies for its control and elimination in Ethiopia

    Directory of Open Access Journals (Sweden)

    Fassil Shiferaw

    2016-08-01

    Full Text Available Abstract Background Hepatitis B and C are silent killers not yet recognized as major public health challenges in many developing countries with huge disease burden. In Ethiopia, Hepatitis B is endemic with an average prevalence of 10.8 %, and the prevalence of Hepatitis C is 2 %. The prevalence of both infections, however, is likely to be underreported due to the lack of diagnostic facilities and appropriate surveillance systems. Ethiopia is also among the many Sub-Sahara African countries lacking a coordinated and systematic national response to chronic viral hepatitis. The objective of this study is to examine the current level of response to viral Hepatitis B & C in Ethiopia with the aim to bring identified gaps to the attention of relevant stakeholders and policy makers. Methods This cross-sectional qualitative study was based on semi-structured in-depth interviews with 21 key informants from health facilities, health offices, pharmaceutical companies, regulatory bodies, professional association and blood bank units. Participants were selected purposively based on their role in the national hepatitis response. The investigators also reviewed available policy and strategy documents, standards of practice and surveys, and paid visits to pharmaceutical premises to check the availability of antiviral drugs. Thematic analysis was employed to make sense of the data. During the data analysis process, all the authors critically read the materials, and data was triangulated by source, interpreter view and thematic perspective to ensure accurate representation and comprehensiveness, and validation of the interviewees’ responses. Once each investigator reviewed the data independently, the team reached a common understanding of the scope and contexts of the information attained. Data were subsequently reduced to key concepts, and case stories were taken with successive revisions. The key concepts were later coded into most basic meaningful

  12. Chronic viral hepatitis: policy, regulation, and strategies for its control and elimination in Ethiopia.

    Science.gov (United States)

    Shiferaw, Fassil; Letebo, Mekitew; Bane, Abate

    2016-08-11

    Hepatitis B and C are silent killers not yet recognized as major public health challenges in many developing countries with huge disease burden. In Ethiopia, Hepatitis B is endemic with an average prevalence of 10.8 %, and the prevalence of Hepatitis C is 2 %. The prevalence of both infections, however, is likely to be underreported due to the lack of diagnostic facilities and appropriate surveillance systems. Ethiopia is also among the many Sub-Sahara African countries lacking a coordinated and systematic national response to chronic viral hepatitis. The objective of this study is to examine the current level of response to viral Hepatitis B & C in Ethiopia with the aim to bring identified gaps to the attention of relevant stakeholders and policy makers. This cross-sectional qualitative study was based on semi-structured in-depth interviews with 21 key informants from health facilities, health offices, pharmaceutical companies, regulatory bodies, professional association and blood bank units. Participants were selected purposively based on their role in the national hepatitis response. The investigators also reviewed available policy and strategy documents, standards of practice and surveys, and paid visits to pharmaceutical premises to check the availability of antiviral drugs. Thematic analysis was employed to make sense of the data. During the data analysis process, all the authors critically read the materials, and data was triangulated by source, interpreter view and thematic perspective to ensure accurate representation and comprehensiveness, and validation of the interviewees' responses. Once each investigator reviewed the data independently, the team reached a common understanding of the scope and contexts of the information attained. Data were subsequently reduced to key concepts, and case stories were taken with successive revisions. The key concepts were later coded into most basic meaningful categories. The World Health Organization (WHO) global

  13. Tools and Strategies for Malaria Control and Elimination: What Do We Need to Achieve a Grand Convergence in Malaria?

    Directory of Open Access Journals (Sweden)

    Janet Hemingway

    2016-03-01

    Full Text Available Progress made in malaria control during the past decade has prompted increasing global dialogue on malaria elimination and eradication. The product development pipeline for malaria has never been stronger, with promising new tools to detect, treat, and prevent malaria, including innovative diagnostics, medicines, vaccines, vector control products, and improved mechanisms for surveillance and response. There are at least 25 projects in the global malaria vaccine pipeline, as well as 47 medicines and 13 vector control products. In addition, there are several next-generation diagnostic tools and reference methods currently in development, with many expected to be introduced in the next decade. The development and adoption of these tools, bolstered by strategies that ensure rapid uptake in target populations, intensified mechanisms for information management, surveillance, and response, and continued financial and political commitment are all essential to achieving global eradication.

  14. Modelling strategies to break transmission of lymphatic filariasis--aggregation, adherence and vector competence greatly alter elimination.

    Science.gov (United States)

    Irvine, M A; Reimer, L J; Njenga, S M; Gunawardena, S; Kelly-Hope, L; Bockarie, M; Hollingsworth, T D

    2015-10-22

    With ambitious targets to eliminate lymphatic filariasis over the coming years, there is a need to identify optimal strategies to achieve them in areas with different baseline prevalence and stages of control. Modelling can assist in identifying what data should be collected and what strategies are best for which scenarios. We develop a new individual-based, stochastic mathematical model of the transmission of lymphatic filariasis. We validate the model by fitting to a first time point and predicting future timepoints from surveillance data in Kenya and Sri Lanka, which have different vectors and different stages of the control programme. We then simulate different treatment scenarios in low, medium and high transmission settings, comparing once yearly mass drug administration (MDA) with more frequent MDA and higher coverage. We investigate the potential impact that vector control, systematic non-compliance and different levels of aggregation have on the dynamics of transmission and control. In all settings, increasing coverage from 65 to 80 % has a similar impact on control to treating twice a year at 65 % coverage, for fewer drug treatments being distributed. Vector control has a large impact, even at moderate levels. The extent of aggregation of parasite loads amongst a small portion of the population, which has been estimated to be highly variable in different settings, can undermine the success of a programme, particularly if high risk sub-communities are not accessing interventions. Even moderate levels of vector control have a large impact both on the reduction in prevalence and the maintenance of gains made during MDA, even when parasite loads are highly aggregated, and use of vector control is at moderate levels. For the same prevalence, differences in aggregation and adherence can result in very different dynamics. The novel analysis of a small amount of surveillance data and resulting simulations highlight the need for more individual level data to be

  15. MSM actuators: design rules and control strategies

    Energy Technology Data Exchange (ETDEWEB)

    Holz, Benedikt; Janocha, Hartmut [Laboratory of Process Automation (LPA), Saarland University, Saarbruecken (Germany); Riccardi, Leonardo; Naso, David [Department of Electronics and Electrical Science (DEE), Politecnico di Bari (Italy)

    2012-08-15

    Magnetic shape memory (MSM) alloys are comparatively new active materials which can be used for several industrial applications, ranging from precise positioning systems to advanced robotics. Beyond the material research, which deals with the basic thermo-magneto-mechanical properties of the crystals, the design as well as the control of the actuators displacement is an essential challenge. This paper addresses those two topics, trying to give to the reader a useful overview of existing results, but also presents new ideas. First, it introduces and discusses in details some possible designs, with a special emphasis on innovative actuator design concepts which are able to exploit the particular potentialities of MSM elements. The second focus of the paper is on the problem of designing a controller, i.e., an algorithm that allows to obtain a required performance from the actuator. The proposed control strategies try to take into account two main characteristics of MSM elements: the hysteresis and the temperature dependence. The effectiveness of the strategies is emphasized by experimental results performed on a commercially available MSM actuator demonstrator. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. Rational Design in Catalysis: A Mechanistic Study of β-Hydride Eliminations in Gold(I) and Gold(III) Complexes Based on Features of the Reaction Valley.

    Science.gov (United States)

    Castiñeira Reis, Marta; López, Carlos Silva; Kraka, Elfi; Cremer, Dieter; Faza, Olalla Nieto

    2016-09-06

    β-Hydride eliminations for ethylgold(III) dichloride complexes are identified as reactions with an unusually long prechemical stage corresponding to the conformational preparation of the reaction complex and spanning six phases. The prechemical process is characterized by a geared rotation of the L-Au-L group (L = Cl) driving methyl group rotation and causing a repositioning of the ligands. This requires more than 28 kcal/mol of the total barrier of 34.0 kcal/mol, according to the unified reaction valley approach, which also determines that the energy requirements of the actual chemical process leading to the β-elimination product are only about 5.5 kcal/mol. A detailed mechanistic analysis was used as a basis for a rational design of substrates (via substituents on the ethyl group) and/or ligands, which can significantly reduce the reaction barrier. This strategy takes advantage of either a higher trans activity of the ligands or a tuned electronic demand of the ethyl group. The β-hydride elimination of gold(I) was found to suffer from strong Coulomb and exchange repulsion when a positively charged hydrogen atom enforces a coordination position in a d(10)-configured gold atom, thus triggering an unassisted σ-π Au(I)-C conversion.

  17. Enhancing community knowledge and health behaviors to eliminate blinding trachoma in Mali using radio messaging as a strategy.

    Science.gov (United States)

    Bamani, Sanoussi; Toubali, Emily; Diarra, Sadio; Goita, Seydou; Berté, Zana; Coulibaly, Famolo; Sangaré, Hama; Tuinsma, Marjon; Zhang, Yaobi; Dembelé, Benoit; Melvin, Palesa; MacArthur, Chad

    2013-04-01

    The National Blindness Prevention Program in Mali has broadcast messages on the radio about trachoma as part of the country's trachoma elimination strategy since 2008. In 2011, a radio impact survey using multi-stage cluster sampling was conducted in the regions of Kayes and Segou to assess radio listening habits, coverage of the broadcasts, community knowledge and behavior specific to trachoma and facial cleanliness of children. Radio access and listening were high, with 60% of respondents having heard a message on the radio about trachoma. The majority of respondents knew about trachoma, its root causes, its impact on health and prevention measures. Additionally, 66% reported washing their children's faces more than or equal to twice/day and 94% reported latrine disposal of feces. A high percentage of persons who gave a positive response to knowledge and behavior questions reported hearing the trachoma messages on the radio with 60% reporting that the radio is where they learned about trachoma. There was no significant difference in facial cleanliness when comparing children whose primary caregiver had/had not heard the trachoma messages. Next steps include revising the current messages to include more focused behavior change messaging and to engage in a more robust use of community radios.

  18. Biomedical engineering strategies in system design space.

    Science.gov (United States)

    Savageau, Michael A

    2011-04-01

    Modern systems biology and synthetic bioengineering face two major challenges in relating properties of the genetic components of a natural or engineered system to its integrated behavior. The first is the fundamental unsolved problem of relating the digital representation of the genotype to the analog representation of the parameters for the molecular components. For example, knowing the DNA sequence does not allow one to determine the kinetic parameters of an enzyme. The second is the fundamental unsolved problem of relating the parameters of the components and the environment to the phenotype of the global system. For example, knowing the parameters does not tell one how many qualitatively distinct phenotypes are in the organism's repertoire or the relative fitness of the phenotypes in different environments. These also are challenges for biomedical engineers as they attempt to develop therapeutic strategies to treat pathology or to redirect normal cellular functions for biotechnological purposes. In this article, the second of these fundamental challenges will be addressed, and the notion of a "system design space" for relating the parameter space of components to the phenotype space of bioengineering systems will be focused upon. First, the concept of a system design space will be motivated by introducing one of its key components from an intuitive perspective. Second, a simple linear example will be used to illustrate a generic method for constructing the design space in which qualitatively distinct phenotypes can be identified and counted, their fitness analyzed and compared, and their tolerance to change measured. Third, two examples of nonlinear systems from different areas of biomedical engineering will be presented. Finally, after giving reference to a few other applications that have made use of the system design space approach to reveal important design principles, some concluding remarks concerning challenges and opportunities for further development

  19. Low Cost Design of an Advanced Encryption Standard (AES) Processor Using a New Common-Subexpression-Elimination Algorithm

    Science.gov (United States)

    Chen, Ming-Chih; Hsiao, Shen-Fu

    In this paper, we propose an area-efficient design of Advanced Encryption Standard (AES) processor by applying a new common-expression-elimination (CSE) method to the sub-functions of various transformations required in AES. The proposed method reduces the area cost of realizing the sub-functions by extracting the common factors in the bit-level XOR/AND-based sum-of-product expressions of these sub-functions using a new CSE algorithm. Cell-based implementation results show that the AES processor with our proposed CSE method has significant area improvement compared with previous designs.

  20. Combination microwave ovens: an innovative design strategy.

    Science.gov (United States)

    Tinga, Wayne R; Eke, Ken

    2012-01-01

    Reducing the sensitivity of microwave oven heating and cooking performance to load volume, load placement and load properties has been a long-standing challenge for microwave and microwave-convection oven designers. Conventional design problem and solution methods are reviewed to provide greater insight into the challenge and optimum operation of a microwave oven after which a new strategy is introduced. In this methodology, a special load isolating and energy modulating device called a transducer-exciter is used containing an iris, a launch box, a phase, amplitude and frequency modulator and a coupling plate designed to provide spatially distributed coupling to the oven. This system, when applied to a combined microwave-convection oven, gives astounding performance improvements to all kinds of baked and roasted foods including sensitive items such as cakes and pastries, with the only compromise being a reasonable reduction in the maximum available microwave power. Large and small metal utensils can be used in the oven with minimal or no performance penalty on energy uniformity and cooking results. Cooking times are greatly reduced from those in conventional ovens while maintaining excellent cooking performance.

  1. A Fractual Mechanical Testing and Design Strategy for FRC Structures

    DEFF Research Database (Denmark)

    Stang, Henrik; Olesen, John Forbes

    1999-01-01

    A unified testing and design strategy for fibre reinforced concrete structures is summarised. The strategy is based on fracture mechanical concepts. Emphasis is placed on material characterisation and testing specifications.......A unified testing and design strategy for fibre reinforced concrete structures is summarised. The strategy is based on fracture mechanical concepts. Emphasis is placed on material characterisation and testing specifications....

  2. Novel strategies lead to pre-elimination of malaria in previously high-risk areas in Suriname, South America

    Directory of Open Access Journals (Sweden)

    Hiwat Hélène

    2012-01-01

    Full Text Available Abstract Background Suriname was a high malaria risk country before the introduction of a new five-year malaria control program in 2005, the Medical Mission Malaria Programme (MM-MP. Malaria was endemic in the forested interior, where especially the stabile village communities were affected. Case description The interventions of the MM-MP included new strategies for prevention, vector control, case management, behavioral change communication (BCC/information, education and communication (IEC, and strengthening of the health system (surveillance, monitoring and evaluation and epidemic detection system. After a slow first year with non-satisfying scores for the performance indicators, the MM-MP truly engaged in its intervention activities in 2006 and kept its performance up until the end of 2009. A total of 69,994 long-lasting insecticide-treated nets were distributed and more than 15,000 nets re-impregnated. In high-risk areas, this was complemented with residual spraying of insecticides. Over 10,000 people were screened with active case detection in outbreak and high-risk areas. Additional notification points were established and the national health system was strengthened. Discussion and evaluation In the current paper, the MM-MP is evaluated both on account of the targets established within the programme and on account of its impact on the malaria situation in Suriname. Malaria vector populations, monitored in sentinel sites, collapsed after 2006 and concurrently the number of national malaria cases decreased from 8,618 in 2005 to 1,509 in 2009. Malaria transmission risk shifted from the stabile village communities to the mobile gold mining communities, especially those along the French Guiana border. Conclusions The novel strategies for malaria control introduced in Suriname within the MM-MP have led to a significant decrease in the national malaria burden. The challenge is to further reduce malaria using the available strategies as

  3. Novel strategies lead to pre-elimination of malaria in previously high-risk areas in Suriname, South America.

    Science.gov (United States)

    Hiwat, Hélène; Hardjopawiro, Loretta S; Takken, Willem; Villegas, Leopoldo

    2012-01-09

    Suriname was a high malaria risk country before the introduction of a new five-year malaria control program in 2005, the Medical Mission Malaria Programme (MM-MP). Malaria was endemic in the forested interior, where especially the stabile village communities were affected. The interventions of the MM-MP included new strategies for prevention, vector control, case management, behavioral change communication (BCC)/information, education and communication (IEC), and strengthening of the health system (surveillance, monitoring and evaluation and epidemic detection system). After a slow first year with non-satisfying scores for the performance indicators, the MM-MP truly engaged in its intervention activities in 2006 and kept its performance up until the end of 2009. A total of 69,994 long-lasting insecticide-treated nets were distributed and more than 15,000 nets re-impregnated. In high-risk areas, this was complemented with residual spraying of insecticides. Over 10,000 people were screened with active case detection in outbreak and high-risk areas. Additional notification points were established and the national health system was strengthened. In the current paper, the MM-MP is evaluated both on account of the targets established within the programme and on account of its impact on the malaria situation in Suriname. Malaria vector populations, monitored in sentinel sites, collapsed after 2006 and concurrently the number of national malaria cases decreased from 8,618 in 2005 to 1,509 in 2009. Malaria transmission risk shifted from the stabile village communities to the mobile gold mining communities, especially those along the French Guiana border. The novel strategies for malaria control introduced in Suriname within the MM-MP have led to a significant decrease in the national malaria burden. The challenge is to further reduce malaria using the available strategies as appropriate in the affected areas and populations. Elimination of malaria in the country will

  4. Nature-Inspired Design : Strategies for Sustainable Product Development

    NARCIS (Netherlands)

    De Pauw, I.C.

    2015-01-01

    Product designers can apply different strategies, methods, and tools for sustainable product development. Nature-Inspired Design Strategies (NIDS) offer designers a distinct class of strategies that use ‘nature’ as a guiding source of knowledge and inspiration for addressing sustainability.

  5. Design strategies for pollution prevention in industries (life cycle design)

    International Nuclear Information System (INIS)

    Saleemi, A.R.

    1997-01-01

    Pollution prevention and adoption of clean technologies in the industry are to be the proper strategies to flight against the growing industrial pollution in Pakistan. These strategies will not only reduce the existing pollution load and will also help to have sustainable industrial development in Pakistan in is well established that the concept of pollution prevention demands use of minimum, resources with maximum efficiency to achieve double benefits such as resource conservation and environmental protection. The application of cleaner production and waste minimization in thousand of industries in other part of world has proved beyond doubt that the use of cleaner technology is cheaper as compared to installation of waste treatment plants for end of pipe treatment. Waste treatment plants have been blamed not to solve any pollution problem, but only to transfer pollution from one environmental media to another. The adoption of waste treatment technologies have also created lot of other problems. Thousand of industries in the world have change their focus of activities from end of pipe treatment to pollution prevention techniques. It is the right time to start pollution prevention activities in industry. The design of a product system in the industry can be represented logically as a series of decision and choices made individually and collectively by design participant. The choices range from the selection of materials and manufacturing processes to choices relating to shape, from and function of a product. The product life cycle design provides a logical system for addressing pollution prevention because the full range of environmental consequence associated with the product can be considered and it is a powerful tool for identifying and maximizing the environmental benefits of pollution prevention. The life cycle assesment (LCA) concept suggests that decision making should be based on consideration of the cradle-to grave characteristics of the product, process

  6. Logistics Sourcing Strategies in Supply Chain Design

    OpenAIRE

    Liu, Liwen

    2007-01-01

    A company's logistics sourcing strategy determines whether it structures and organizeslogistics within the company or company group or integrates logistics upstream and downstreamin the supply chain. First, three different types of logistics sourcing strategies in supply chaindesign are described and the theoretical background for the development of these strategies,including both transaction cost theory and network theory, is analyzed. Two special casesabout logistics sourcing strategy decis...

  7. Active living by design sustainability strategies.

    Science.gov (United States)

    Kraft, M Katherine; Lee, Joanne J; Brennan, Laura K

    2012-11-01

    Despite substantial increases in improving the translation of health promotion research into practice, community initiatives still struggle with maintaining changes once grant funding has ended. Researchers, funders, and community practitioners are interested in practices that maintain and sustain their efforts. This qualitative study conducted a content analysis of evaluation findings from Active Living by Design (ALbD) to identify activities that community coalitions implemented to maintain their initiative and secure ongoing influence in communities. Investigators analyzed data from interviews, focus groups, and the Progress Reporting System to identify sustainability approaches clustering into five areas: partnership expansion, sustainable funding, permanent advisory committees, policy change, and institution/organization change. Partnership expansion occurred across sectors and disciplines and into broader geographic areas. Additional funding extended beyond grants to earned income streams and dedicated tax revenues. Permanent advisory committees were established to inform decision makers about a range of active living impacts. Policy changes in zoning and comprehensive plans ensured maintenance of health-promoting built environments. Sustainability through institution/organization changes led to allocation of dedicated staff and incorporation of active living values into agency missions. Active Living by Design partnerships defined and messaged their projects to align with policymakers' interests and broad partnership audiences. They found innovative supporters and adapted their original vision to include quality of life, nonmotorized transport, and other complementary efforts that expanded their reach and influence. These sustainability strategies altered awareness within communities, changed community decision-making processes, and created policy changes that have the potential to maintain environments that promote physical activity for years to come

  8. Eliminating armaments

    International Nuclear Information System (INIS)

    Adams, R.

    1998-01-01

    The end of Cold War induced optimistic projections concerning disarmament, elimination of nuclear weapons, elimination of massive inequities - poverty, hatred, racism. All these goals should be achieved simultaneously, but little has been achieved so far

  9. Design Strategies for Balancing Exertion Games

    DEFF Research Database (Denmark)

    Jensen, Mads Møller; Grønbæk, Kaj

    2016-01-01

    In sports, if players' physical and technical abilities are mismatched, the competition is often uninteresting for them. With the emergence of exertion games, this could be changing. Player balancing, known from video games, allows players with different skill levels to compete, however, it is un......In sports, if players' physical and technical abilities are mismatched, the competition is often uninteresting for them. With the emergence of exertion games, this could be changing. Player balancing, known from video games, allows players with different skill levels to compete, however......, it is unclear how balancing mechanisms should be applied in exertion games, where physical and digital elements are fused. In this paper, we present an exertion game and three approaches for balancing it; a physical, an explicit-digital and an implicit-digital balancing approach. A user study that compares...... these three approaches is used to investigate the qualities and challenges within each approach and explore how the player experience is affected by them. Based on these findings, we suggest four design strategies for balancing exertion games, so that players will stay engaged in the game and contain...

  10. Strategies for designing novel functional meat products.

    Science.gov (United States)

    Arihara, Keizo

    2006-09-01

    In recent years, much attention has been paid to physiological functions of foods due to increasing concerns for health. Although there has been limited information of physiological functions of meat until recently, several attractive meat-based bioactive compounds, such as carnosine, anserine, l-carnitine, conjugated linoleic acid, have been studied. Emphasizing these activities is one possible approach for improving the health image of meat and developing functional meat products. This article provides potential benefits of representative meat-based bioactive compounds on human health and an overview of meat-based functional products. Strategies for designing novel functional meat products utilizing bioactive peptides and/or probiotic bacteria, is also discussed. This article focuses particularly on the possibility of meat protein-derived bioactive peptides, such as antihypertensive peptides. There are still some hurdles in developing and marketing novel functional meat products since such products are unconventional and consumers in many countries recognize meat and meat products to be bad for health. Along with accumulation of scientific data, there is an urgent need to inform consumers of the exact functional value of meat and meat products including novel functional foods.

  11. The full-scale process and design changes for elimination of insulation edge separations and voids in tang flap area

    Science.gov (United States)

    Danforth, Richard A.

    1991-01-01

    Qualification of the full-scale process and design changes for elimination of redesigned solid rocket motor tang nitrile butadiene rubber insulation edge separations and voids was performed from 24 March to 3 December 1990. The objectives of this test were: to qualify design and process changes on flight hardware using a tie ply between the redesigned solid rocket motor steel case and the nitrile butadiene rubber insulation over the tang capture features; to qualify the use of methyl ethyl ketone in the tang flap region to reduce voids; and to determine if holes in the separator film reduce voids in the tang flap region. The tie ply is intended to aid insulation flow during the insulation cure process, and thus reduce or eliminate edge unbonds. Methyl ethyl ketone is intended to reduce voids in the tang flap area by providing better tacking characteristics. The perforated film was intended to provide possible vertical breathe paths to reduce voids in the tang area. Tang tie ply testing consisted of 270 deg of the tang circumference using a new layup method and 90 deg of the tang circumference using the current layup methods. Tie ply process success was defined as a reduction of insulation unbonds. Lack of any insulation edge unbonds on the tang area where the new process was used, and the presence of 17 unbonds with the current process, proves the test to be a success. Successful completion of this test has qualified the new processes.

  12. Rapid Prototyping: An Alternative Instructional Design Strategy.

    Science.gov (United States)

    Tripp, Steven D.; Bichelmeyer, Barbara

    1990-01-01

    Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

  13. Strategies for innovation in multicomponent reaction design.

    Science.gov (United States)

    Ganem, Bruce

    2009-03-17

    By generating structural complexity in a single step from three or more reactants, multicomponent reactions (MCRs) make it possible to synthesize target compounds with greater efficiency and atom economy. The history of such reactions can be traced to the mid-19th century when Strecker first produced alpha-aminonitriles from the condensation of aldehydes with ammonia and hydrogen cyanide. Recently, academic chemists have renewed their interest in MCRs. In part, the pharmaceutical industry has fueled this resurgence because of the growing need to assemble libraries of structurally complex substances for evaluation as lead compounds in drug discovery and development programs. The application of MCRs to that increasingly important objective remains limited by the relatively small number of such reactions that can be broadly applied to prepare biologically relevant or natural-product-like molecular frameworks. We were interested in applying logic-based approaches, such as our single reactant replacement (SRR) approach, as a way both to improve known MCRs and to design new multiple-component routes to bioactive structures. This Account provides several examples that illustrate the use of SRR with known MCRs as starting points for synthetic innovation in this area. As part of our working hypothesis, we initially explored strategies for engineering improvements into known MCRs, either by increasing the dimensionality--that is, changing an n-component to an (n + 1)-component reaction--or broadening the scope of useful input structures, or both. By exhaustively applying retrosynthetic analysis to the cognate MCR to identify and exploit alternative entry points into the overall reaction manifold, we have devised several such re-engineered MCRs. Serendipitous findings have also augmented the yield of useful developments from our logic-inspired approach. In some cases, we have identified surprising links between different compound families that provide useful new entry points

  14. Wandering as a design strategy for infrastructuring

    OpenAIRE

    Van Reusel, Hanne

    2016-01-01

    The notion of design gradually diverges from its conceptualization as framed design projects that focus on the production of objects. It shifts to open-ended processes that are oriented toward the creation of services and the congregation of organizations. In the participatory design (PD) scene the emerging future-oriented design-after-design approach is understood as a process of ‘infrastructuring’. The co-design process of Recup’Kitchen is described as an example of an infrastructuring desi...

  15. Design strategies for human relations in services

    NARCIS (Netherlands)

    Snelders, H.M.J.J.; Perik, E.M.; Secomandi, F.

    2014-01-01

    This paper investigates the degree of control that designers might have over human relations in services. For this purpose, a number of speculative service designs were devised to address work-related stress. We focus on three of the generated designs, where design interventions have made changes to

  16. Design of six pulse bridge multiplication converter model for current harmonic elimination of three phase ac-dc converter

    International Nuclear Information System (INIS)

    Soomro, M.A.; Helepoto, I.A.

    2014-01-01

    The recent development of semiconductor technology and wide spread use of power electronic devices in power system have open the era of the power system harmonics due to increasing penetration of non-linear loads. Harmonics are widely admitted as most important issues of power quality which must be eliminated to maintain power system reliability. The tolerable THD (Total Harmonic Distortion) values must be bounded in well-defined limits recognized by IEEE-519 standard. In this work, in order to eliminate the current harmonics produced by non-linear loads, six pulse multiplication converter technique in conjunction with STSSHPE (Single Tuned Shunt Harmonic Passive Filter) is proposed. The proposed model has the capacity of harmonic cancellation of the dominant 3rd order harmonics. Besides that, the 5th and 7th order harmonics are also reduced to a diminishing level. The hardware model has been experimentally tested by PQA (Power Quality Analyzer) and simulation model is designed using MATLAB software. The acquired results have been measured by considering THD values in terms of current and voltage. Furthermore, they have been compared against IEEE-519 performance standards. The prosed model, successfully bounds the total harmonic distortion under defined limits by IEEE-519 standard. (author)

  17. Generation IV nuclear plant design strategies

    International Nuclear Information System (INIS)

    Altin, V.

    2007-01-01

    In this presentation Generation IV nuclear reactor design criteria are examined under the light of known nuclear properties of fissile and fertile nuclei. Their conflicting nature is elucidated along with the resulting inevitability of a multitude of designs. The designs selected as candidates for further development are evaluated with respect to their potential to serve the different design criteria, thereby revealing their more difficult aspects of realization and the strong research challenges lying ahead

  18. The Green Studio Handbook: Environmental Strategies for Schematic Design

    Directory of Open Access Journals (Sweden)

    Alison G. Kwok

    2012-11-01

    Full Text Available In design studio projects we often see schemes with inspired, yet unvalidated, gestural sketches related to wishful green strategies. Yellow and blue magic arrows represent hypotheses about the behavior of daylight and/or air flow in and about buildings. This paper provides an overview of The Green Studio Handbook, recently published as a resource for designers seeking clear guidelines for integrating green design strategies into the conceptual and schematic phases of design. The book contains a discussion of the integration of green strategies and how building form, orientation, and spatial layout are critical to the proper performance of certain green strategies; 40 green design strategies in six broad topic areas, each providing acatalog of information for common strategies that must be implemented at the schematic design phase; and nine case studies that show how various green strategies work together in a finished building. This paper provides excerpts of several design strategies and one case study and suggests a variety of ways that the book may be used.Keywords: green design, case studies, education, schematic design

  19. Collaborative Design Strategy: Knowledge exchange for roof design

    NARCIS (Netherlands)

    Zeiler, W.; Quanjel, E.M.C.J.; Roozenburg, N.; Chen, L-L; Stappers, P.J.

    2011-01-01

    In the (Dutch) Building Industry sub optimal use of knowledge by participants during the design phase causes damage and failure costs, as well as it hinders innovative sustainable solutions. Therefore a design tool was developed to support design knowledge exchange between different design team

  20. Integrated Design as an Evolutive Transdisciplinary Strategy

    OpenAIRE

    Bujar Bajçinovci; Florina Jerliu

    2016-01-01

    New challenges should stimulate new research, in order to provide better and higher quality of life. The essence of transdisciplinary design consists of different professions closely related to architectural design aiming for better and qualitative solutions, which with new findings exceed the usual and conventional disciplinary boundaries. Incentive mechanism for lateral thinking in the design process is accomplished when all the team members overcome a conventional barrier, in creating fund...

  1. Global searches for microalgae and aquatic plants that can eliminate radioactive cesium, iodine and strontium from the radio-polluted aquatic environment: a bioremediation strategy.

    Science.gov (United States)

    Fukuda, Shin-Ya; Iwamoto, Koji; Atsumi, Mika; Yokoyama, Akiko; Nakayama, Takeshi; Ishida, Ken-Ichiro; Inouye, Isao; Shiraiwa, Yoshihiro

    2014-01-01

    The Fukushima 1 Nuclear Power Plant accident in March 2011 released an enormously high level of radionuclides into the environment, a total estimation of 6.3 × 10¹⁷ Bq represented by mainly radioactive Cs, Sr, and I. Because these radionuclides are biophilic, an urgent risk has arisen due to biological intake and subsequent food web contamination in the ecosystem. Thus, urgent elimination of radionuclides from the environment is necessary to prevent substantial radiopollution of organisms. In this study, we selected microalgae and aquatic plants that can efficiently eliminate these radionuclides from the environment. The ability of aquatic plants and algae was assessed by determining the elimination rate of radioactive Cs, Sr and I from culture medium and the accumulation capacity of radionuclides into single cells or whole bodies. Among 188 strains examined from microalgae, aquatic plants and unidentified algal species, we identified six, three and eight strains that can accumulate high levels of radioactive Cs, Sr and I from the medium, respectively. Notably, a novel eustigmatophycean unicellular algal strain, nak 9, showed the highest ability to eliminate radioactive Cs from the medium by cellular accumulation. Our results provide an important strategy for decreasing radiopollution in Fukushima area.

  2. Developing an Integrated Design Strategy for Chip Layout Optimization

    NARCIS (Netherlands)

    Wits, Wessel Willems; Jauregui Becker, Juan Manuel; van Vliet, Frank Edward; te Riele, G.J.

    2011-01-01

    This paper presents an integrated design strategy for chip layout optimization. The strategy couples both electric and thermal aspects during the conceptual design phase to improve chip performances; thermal management being one of the major topics. The layout of the chip circuitry is optimized

  3. Linking Design to Business Strategy Through Functional Analysis

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    1997-01-01

    The paper discusses how designers, conducting design projects in specific organization's, can assure that the design of IT is appropriately linked to the organizations overall business strategy. A case study is presented in the form of a design project in a small public organization. Functional...... analysis was used as a means to clarify how a specific needed information system could support the organization's new business strategy. Using functional analysis in the design project had a powerful effect: it seriously challenged the organization's business strategy and revealed that the system...... to the relation between an organization's IT-projects and its business strategy and by suggesting that it is the responsibility of the designers, conducting design projects, to assure that this task is taken proper care of. Practical guidelines for this purpose are given....

  4. Provocative design for unprovocative designers : Strategies for triggering personal dilemmas

    NARCIS (Netherlands)

    Ozkaramanli, D.; Desmet, P.M.A.; Lloyd, Peter; Bohemia, Erik

    2016-01-01

    Traditional design approaches stimulate the creation of products that make daily interactions more efficient, comfortable, and pleasant. In contrast, provocative design approaches, such as critical design, have a different focus: they aim to challenge the status quo through products that expose

  5. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian; Matzen, Detlef; McAloone, Tim C.

    2009-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer activities and product life cycle considerations. Literature offers a range of serviceoriented design strategies from product-oriented DfX approaches to more customer......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to begin to understand how manufacturing...... companies may align their business strategies with their product and service development activities....

  6. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald; Matzen, Detlef; McAloone, Tim C.

    2010-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer- and product life cycleactivities . Literature offers a range of service-oriented design strategies from product-oriented DfX approaches to more customer...... manufacturing companies may align their product and service development activities with their business strategies.......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to improve understanding of how...

  7. Designing a fuzzy expert system for selecting knowledge management strategy

    Directory of Open Access Journals (Sweden)

    Ameneh Khadivar

    2014-12-01

    Full Text Available knowledge management strategy is mentioned as one of the most important success factors for implementing knowledge management. The KM strategy selection is a complex decision that requires consideration of several factors. For evaluation and selection of an appropriate knowledge management strategy in organizations, many factors must be considered. The identified factors and their impact on knowledge management strategy are inherently ambiguous. In this study, an overview of theoretical foundations of research regarding the different knowledge management strategies has been done And factors influencing the knowledge management strategy selection have been extracted from conceptual frameworks and models. How these factors influence the knowledge management strategy selection is extracted through the fuzzy Delphi. Next a fuzzy expert system for the selection of appropriate knowledge management strategy is designed with respect to factors that have an impact on knowledge management strategy. The factors which influence the selection of knowledge management strategy include: general business strategy, organizational structure, cultural factors, IT strategy, strategic human resource management, social level, the types of knowledge creation processes and release it. The factors which influence the knowledge management strategy selection include: business strategy general, organizational structure, cultural factors, IT strategy, human resource management strategies, socialization level, knowledge types and its creation and diffusion processes. According to identified factors which affect the knowledge management strategy, the final strategy is recommended based on the range of human-oriented and system-oriented by keep the balance of explicit and implicit knowledge. The Designed system performance is tested and evaluated by the information related to three Iranian organization.

  8. appropriate strategies for designing contemporary art museums

    African Journals Online (AJOL)

    2016-07-16

    Jul 16, 2016 ... such as (aesthetic style designed for the set, easy access to the collections and availability of educational .... Thus, any decisions to encounter different cultures can help the ... effect of museum attraction on cultural tourism status in the ..... Making the space dynamic and attractive by providing adequate ...

  9. Nature inspired design : Strategies towards sustainability

    NARCIS (Netherlands)

    De Pauw, I.C.; Kandachar, P.V.; Karana, E.; Peck, D.P.; Wever, R.

    2010-01-01

    Current design practices focus on eco-efficiency as the main approach in the field of sustainable product development. This approach mainly aims at improving existing products and services. Environmental product performance can be greatly improved using ecoefficiency but in many cases the

  10. Strategies for Teaching Brainstorming in Design Education

    Science.gov (United States)

    Mentzer, Nathan; Farrington, Shawn; Tennenhouse, Jason

    2015-01-01

    Innovation has been an important aspect of economic and scientific success in the United States for decades. Hobday, Coffey, Saalfeld, and Colwell (2011) suggested that, in order to produce innovative ideas, one must have a design-thinking mentality. This article provides the readers with an example of brainstorming techniques that have been…

  11. Strategies for Optimal Design of Structural Systems

    DEFF Research Database (Denmark)

    Enevoldsen, I.; Sørensen, John Dalsgaard

    1992-01-01

    Reliability-based design of structural systems is considered. Especially systems where the reliability model is a series system of parallel systems are analysed. A sensitivity analysis for this class of problems is presented. Direct and sequential optimization procedures to solve the optimization...

  12. Interdisciplinary Information Design with an Empowerment Strategy

    DEFF Research Database (Denmark)

    Barlach, Anders; Engberg, Axel; Pallesen, Bodil

    2006-01-01

    An innovative research into a model for ICT enabled Empowerment. By deliberate use of ICT and a feedback-focused communication model in a prototyping process, e-health information based on an empowerment strategy is evaluated. Overall a risk-driven spiral model is applied for Progress...... and Complexity handling in order to ensure success. The process model devised has a proactive approach to interdisciplinary teamwork, organisational web maturity, and the post-modern user's interaction with ICT. The research is performed and evaluated in cooperation with an interdisciplinary team of health......'s perspective. ORGANIZATIONAL LEVEL: Nursing Informatics becomes a tool in the interdisciplinary understanding, allowing the nurses to take responsibility for core nursing themes regarding the healthy and the diseased phases of the patients' lives. Iterative modelling ensuring the results is evident and derived...

  13. Amalgamating sustainable design strategies into architectural curricula

    OpenAIRE

    Elnokaly, Amira; Elseragy, Ahmed

    2009-01-01

    In the era of climate change, rising sea levels, the hole in the ozone layer and current food crisis, sustainability is no longer a matter of choice; it is a must. While the term sustainability manages to embed itself in all aspects of contemporary life, sustainability in the built environment requires special attention. Designs created by architects and planners play a fundamental part in shaping the way we live, behave and interact with our surroundings. Smith (2001) argued that...

  14. Designing a sustainable strategy for malaria control?

    Directory of Open Access Journals (Sweden)

    Mharakurwa Sungano

    2011-08-01

    Full Text Available Abstract Malaria in the 21st century is showing signs of declining over much of its distribution, including several countries in Africa where previously this was not thought to be feasible. Yet for the most part the strategies to attack the infection are similar to those of the 1950s. Three major Journals have recently drawn attention to the situation, stressing the importance of research, describing the successes and defining semantics related to control. But there is a need to stress the importance of local sustainability, and consider somewhat urgently how individual endemic countries can plan and implement the programmes that are currently financed, for the most part, by donor institutions. On an immediate basis research should be more focused on a data driven approach to control. This will entail new thinking on the role of local infrastructure and in training of local scientists in local universities in epidemiology and field malariology so that expanded control programmes can become operational. Donor agencies should encourage and facilitate development of career opportunities for such personnel so that local expertise is available to contribute appropriately.

  15. Design strategies for irregularly adapting parallel applications

    International Nuclear Information System (INIS)

    Oliker, Leonid; Biswas, Rupak; Shan, Hongzhang; Sing, Jaswinder Pal

    2000-01-01

    Achieving scalable performance for dynamic irregular applications is eminently challenging. Traditional message-passing approaches have been making steady progress towards this goal; however, they suffer from complex implementation requirements. The use of a global address space greatly simplifies the programming task, but can degrade the performance of dynamically adapting computations. In this work, we examine two major classes of adaptive applications, under five competing programming methodologies and four leading parallel architectures. Results indicate that it is possible to achieve message-passing performance using shared-memory programming techniques by carefully following the same high level strategies. Adaptive applications have computational work loads and communication patterns which change unpredictably at runtime, requiring dynamic load balancing to achieve scalable performance on parallel machines. Efficient parallel implementations of such adaptive applications are therefore a challenging task. This work examines the implementation of two typical adaptive applications, Dynamic Remeshing and N-Body, across various programming paradigms and architectural platforms. We compare several critical factors of the parallel code development, including performance, programmability, scalability, algorithmic development, and portability

  16. HIV-1 Eradication Strategies: Design and Assessment

    Science.gov (United States)

    Siliciano, Robert F.

    2014-01-01

    Purpose of review Recent developments have generated renewed interest in the possibility of curing HIV-1 infection. This review describes some of the practical challenges that will need to be overcome if curative strategies are to be successful. Recent findings The latent reservoir for HIV-1 in resting memory CD4+ T cells is the major barrier to curing the infection. The most widely discussed approach to curing the infection involves finding agents that reverse latency in resting CD4+ T cells, with the assumption that the cells will then die from viral cytopathic effects or be lysed by host cytolytic T lymphocytes (CTL). A major challenge is the development of in vitro models that can be used to explore mechanisms and identify latency reversing agents (LRA). Although several models have been developed, including primary cell models, none of them may fully capture the quiescent state of the cells that harbor latent HIV-1 in vivo. An additional problem is that LRA that do not cause T cell activation may not lead to the death of infected cells. Finally, measuring the effects of LRAs in vivo is complicated by the lack of correlation between different assays for the latent reservoir. Summary Progress on these practical issues is essential to finding a cure. PMID:23698561

  17. RAMI strategies in the IFMIF Test Facilities design

    Energy Technology Data Exchange (ETDEWEB)

    Abal, Javier, E-mail: javier.abal@upc.edu [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Dies, Javier [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Arroyo, José Manuel [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain); Bargalló, Enric [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Casal, Natalia; García, Ángela [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain); Martínez, Gonzalo; Tapia, Carlos; De Blas, Alfredo [Fusion Energy Engineering Laboratory (FEEL), Technical University of Catalonia (UPC) Barcelona-Tech, Barcelona (Spain); Mollá, Joaquín; Ibarra, Ángel [Laboratorio Nacional de Fusión por Confinamiento Magnético – CIEMAT, 28040 Madrid (Spain)

    2013-10-15

    Highlights: • We have implemented fault tolerant design strategies so that the strong availability requirements are met. • The evolution to the present design of the signal and cooling lines inside the TTC has also been compared. • The RAMI analyses have demonstrated a strong capability in being a complementary tool in the design of IFMIF Test Facilities. -- Abstract: In this paper, a RAMI analysis of the different stages in Test Facilities (TF) design is described. The comparison between the availability results has been a milestone not only to evaluate the major unavailability contributors in the updates but also to implement fault tolerant design strategies when possible. These strategies encompass a wide range of design activities: from the definition of degraded modes of operation in the Test Facilities to specific modifications in the test modules in order to guarantee their fail safe operation.

  18. RAMI strategies in the IFMIF Test Facilities design

    International Nuclear Information System (INIS)

    Abal, Javier; Dies, Javier; Arroyo, José Manuel; Bargalló, Enric; Casal, Natalia; García, Ángela; Martínez, Gonzalo; Tapia, Carlos; De Blas, Alfredo; Mollá, Joaquín; Ibarra, Ángel

    2013-01-01

    Highlights: • We have implemented fault tolerant design strategies so that the strong availability requirements are met. • The evolution to the present design of the signal and cooling lines inside the TTC has also been compared. • The RAMI analyses have demonstrated a strong capability in being a complementary tool in the design of IFMIF Test Facilities. -- Abstract: In this paper, a RAMI analysis of the different stages in Test Facilities (TF) design is described. The comparison between the availability results has been a milestone not only to evaluate the major unavailability contributors in the updates but also to implement fault tolerant design strategies when possible. These strategies encompass a wide range of design activities: from the definition of degraded modes of operation in the Test Facilities to specific modifications in the test modules in order to guarantee their fail safe operation

  19. SENSORIAL STRATEGIES IN THE DESIGN OF PUBLIC

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2015-05-01

    Full Text Available The present paper wishes to establish new criteria regarding the aesthetic revitalisation of public means of transport in the big cities of Romania, using the principles of sensorial design. Unlike France, country in which the public transport systems in big cities have been reconfigured and permanently improved by adopting new technical solutions, new materials and upholsteries, in Romania, the rough economic context from the last decades led to the purchase of used vehicles from the West; fact which gradually led to the increase of the aesthetic level of pollution in big cities. Taking into account that in the near-by future one cannot see any financial solutions for renewing the vehicle parks, in Iași, the TRAMCLUB NGO initiated the project “The aesthetic revitalisation of RATP [1] Iași public means of transport”, in partnership with RATP Iași and two private companies as sponsors. The project foresees the aesthetic integration of means of transport in the urban aesthetics through a chromatic unification and increasing the quality of the travel experience by adopting a unitary upholstery resistant to wear and with a high level of washability. With the support of the Faculty of Visual Arts and Design (“G. Enescu” University of Arts, Iași, a workshop for students of all study years was organised, with the purpose of choosing the best version of chairs reupholstering, in full accordance with the new visual identity.

  20. Design of strategies to assess lumbar posture during work.

    NARCIS (Netherlands)

    Burdorf, A.; Riel, van M.

    1996-01-01

    Quantitative characterization of postural load on the back should describe exposure patterns among workers and factors affecting these exposure patterns. This article presents general guidelines for designing appropriate measurement strategies; how to obtain detailed data with an applicable

  1. Design for experience where technology meets design and strategy

    CERN Document Server

    Kim, Jinwoo

    2015-01-01

    Presents a strategic perspective and design methodology that guide the process of developing digital products and services that provide 'real experience' to users. Only when the material experienced runs its course to fulfilment is it then regarded as 'real experience' that is distinctively senseful, evaluated as valuable, and harmoniously related to others. Based on the theoretical background of human experience, the book focuses on these three questions: How can we understand the current dominant designs of digital products and services? What are the user experience factor

  2. Moving from control to elimination of schistosomiasis in sub-Saharan Africa: time to change and adapt strategies.

    Science.gov (United States)

    Tchuem Tchuenté, Louis-Albert; Rollinson, David; Stothard, J Russell; Molyneux, David

    2017-02-20

    Schistosomiasis is a water borne parasitic disease of global importance and with ongoing control the disease endemic landscape is changing. In sub-Saharan Africa, for example, the landscape is becoming ever more heterogeneous as there are several species of Schistosoma that respond in different ways to ongoing preventive chemotherapy and the inter-sectoral interventions currently applied. The major focus of preventive chemotherapy is delivery of praziquantel by mass drug administration to those shown to be, or presumed to be, at-risk of infection and disease. In some countries, regional progress may be uneven but in certain locations there are very real prospects to transition from control into interruption of transmission, and ultimately elimination. To manage this transition requires reconsideration of some of the currently deployed diagnostic tools used in surveillance and downward realignment of existing prevalence thresholds to trigger mass treatment. A key challenge will be maintaining and if possible, expanding the current donation of praziquantel to currently overlooked groups, then judging when appropriate to move from mass drug administration to selective treatment. In so doing, this will ensure the health system is adapted, primed and shown to be cost-effective to respond to these changing disease dynamics as we move forward to 2020 targets and beyond.

  3. A Flexible Load Control Strategy for Distribution Network to Reduce the Line Losses and to Eliminate the Transmission Congestion

    Directory of Open Access Journals (Sweden)

    Beibei Wang

    2017-01-01

    Full Text Available There are many uncertain factors in the modern distribution network, including the access of renewable energy sources and the heavy load level. The existence of these factors has brought challenges to the stability of the power distribution network, as well as increasing the risk of exceeding transmission capacity of distribution lines. The appearance of flexible load control technology provides a new idea to solve the above problems. Air conditioners (ACs account for a great proportion of all loads. In this paper, the model of dispatching AC loads in the regional power grid is constructed, and the direct load control (DLC method is adopted to reduce the load of ACs. An improved tabu search technique is proposed to solve the problem of network dispatch in distribution systems in order to reduce the resistive line losses and to eliminate the transmission congestion in lines under normal operating conditions. The optimal node solution is obtained to find the best location and reduction capacity of ACs for load control. To demonstrate the validity and effectiveness of the proposed method, a test system is studied. The numerical results are also given in this article, which reveal that the proposed method is promising.

  4. Strategy update in a design and consulting company

    OpenAIRE

    Kiviniemi, Juha

    2017-01-01

    The target company of the present thesis is a small engineering company specialising in electrical design. The company’s current development stage and changes in its operating environment call for a strategy up-date. The objective of this study was to formulate key conclusions based on an analysis of the company’s current strategy and its operating environment which will later act as an input to the company’s strategy process. The strategy process itself is left outside the scope of this...

  5. Designing Search UX Strategies for eCommerce Success

    CERN Document Server

    Nudelman, Greg

    2011-01-01

    Best practices, practical advice, and design ideas for successful ecommerce search A glaring gap has existed in the market for a resource that offers a comprehensive, actionable design patterns and design strategies for ecommerce search-but no longer. With this invaluable book, user experience designer and user researcher Greg Nudelman shares his years of experience working on popular ecommerce sites as he tackles even the most difficult ecommerce search design problems. Nudelman helps you create highly effective and intuitive ecommerce search design solutions and he takes a unique forward-thi

  6. A Waterfall Design Strategy for Using Social Media for Instruction

    Science.gov (United States)

    Ahern, Terence C.

    2016-01-01

    Using social media can create a rich learning environment that crosses all content areas. The key to creating this environment is for instructors and designers to match appropriate social media software with the intended learning outcome. This article describes an instructional design strategy that helps educators create learning activities that…

  7. Advanced Simulation and Computing Co-Design Strategy

    Energy Technology Data Exchange (ETDEWEB)

    Ang, James A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hoang, Thuc T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kelly, Suzanne M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); McPherson, Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neely, Rob [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-11-01

    This ASC Co-design Strategy lays out the full continuum and components of the co-design process, based on what we have experienced thus far and what we wish to do more in the future to meet the program’s mission of providing high performance computing (HPC) and simulation capabilities for NNSA to carry out its stockpile stewardship responsibility.

  8. Thermally adapted design strategy of colonial houses in Surabaya

    Science.gov (United States)

    Antaryama, I. G. N.; Ekasiwi, S. N. N.; Mappajaya, A.; Ulum, M. S.

    2018-03-01

    Colonial buildings, including houses, have been considered as a representation of climate-responsive architecture. The design was thought to be a hybrid model of Dutch and tropical architecture. It was created by way of reinventing tropical and Dutch architecture design principles, and expressed in a new form, i.e. neither resembling Dutch nor tropical building. Aside from this new image, colonial house does show good climatic responses. Previous researches on colonial house generally focus on qualitative assessment of climate performance of the building. Yet this kind of study tends to concentrate on building elements, e.g. wall, window, etc. The present study is designed to give more complete picture of architecture design strategy of the house by exploring and analysing thermal performance of colonial buildings and their related architecture design strategies. Field measurements are conducted during the dry season in several colonial building in Surabaya. Air temperature and humidity are both taken, representing internal and external thermal conditions of the building. These data are then evaluated to determine thermal performance of the house. Finally, various design strategies are examined in order to reveal their significant contributions to its thermal performance. Results of the study in Surabaya confirm findings of the previous researches that are conducted in other locations, which stated that thermal performance of the house is generally good. Passive design strategies such as mass effect and ventilation play an important role in determining performance of the building.

  9. Appropriate teaching and learning strategies for the architectural design process in pedagogic design studios

    Directory of Open Access Journals (Sweden)

    Ashraf M. Soliman

    2017-06-01

    Full Text Available The national qualification framework of a country requires a certain level of knowledge and complexity of skills for an academic degree to be recognized. For architectural programs, student workload is heavy on design courses. Therefore, each course must be carefully developed to ensure that students are not overloaded. Teaching and learning strategies have different implications for courses, which occasionally result in overloading the students. This research aims to study the three main pillars of teaching and learning strategies for each design phase in pedagogic design studios. The most appropriate model for each teaching and learning strategy, including a set of the three main pillars, is then identified for each design phase. A practical strategy for managing design studios is also determined. The aforementioned three pillars are as follows: teaching and learning methods, assigned tasks or study aspects, and design communication techniques. Two research methods, namely, a literature review and a survey among design educators, are adopted. The literature review examines aspects that contribute to the design process and its phases, teaching methods, design skills, communication methods, and studio management strategies. On the basis of the literature review, the background of developments and practices in the design education process are used as constructive tools to develop the survey for design educators. Through the survey, the pillars of teaching and learning strategies that are frequently practiced in design studios are evaluated. Results of this study are classified into three ranks using the nature break classification method for numerical values. Subsequently, three priority models that correspond to teaching and learning strategies, as well as to the required skills and capabilities, are established. A group-based strategy with an interdisciplinary approach is also determined to be the most suitable technique for managing the

  10. Elimination of Guinea Worm Disease in Ethiopia; Current Status of the Disease's, Eradication Strategies and Challenges to the End Game.

    Science.gov (United States)

    Beyene, Habtamu Bedimo; Bekele, Abyot; Shifara, Amanu; Ebstie, Yehenew A; Desalegn, Zelalem; Kebede, Zeyede; Mulugeta, Abate; Deribe, Kebede; Tadesse, Zerihun; Abebe, Tamrat; Kebede, Biruck; Abrha, Getaneh; Jima, Daddi

    2017-01-01

    intervention strategies that need further intensification to realize the endgame. Eradication strategies encompassing community education for behavioral change including raising awareness towards cash reward for reporting Guniea Worm Disease (GWD) and animal infection, case containment, surveillance systems, provision of safe water supply, and ABATE chemical application are discussed. It also summarizes challenges the end game faces and recommendations to strengthen the eradication effort.

  11. On Adaptive Extended Different Life Cycle of Product Design Strategy

    Science.gov (United States)

    Wenwen, Jiang; Zhibin, Xie

    The article uses research ways of following the whole lifespan of product and enterprise's development course to research strategy of company's product design and development. It announces enterprises of different nature, enterprises at different developing stage will adopt different mode strategy. It also announces close causality between development course of company and central technology and product. The result indicated in different developing stages such as company development period, crisis predicament period, lasting steadies period, improving by payback period, issues steadies secondary period, declining go and live period, enterprise should pursue different mode product tactics of research and development such as shrinking strategy, consolidating strategy, innovation keeping forging ahead strategy. Enterprise should break regular management mode to introduce different research and development mode to promote enterprise's competitiveness effectively.

  12. "Alert-Audit-Act": assessment of surveillance and response strategy for malaria elimination in three low-endemic settings of Myanmar in 2016.

    Science.gov (United States)

    Kyaw, Aye Mon Mon; Kathirvel, Soundappan; Das, Mrinalini; Thapa, Badri; Linn, Nay Yi Yi; Maung, Thae Maung; Lin, Zaw; Thi, Aung

    2018-01-01

    Myanmar, a malaria endemic country of Southeast Asia, adopted surveillance and response strategy similar to "1-3-7" Chinese strategy to achieve sub-national elimination in six low-endemic region/states of the country. Among these, Yangon, Bago-East, and Mon region/states have implemented this malaria surveillance and response strategy with modification in 2016. The current study was conducted to assess the case notification, investigation, classification, and response strategy (NICR) in these three states. This was a retrospective cohort study using routine program data of all patients with malaria diagnosed and reported under the National Malaria Control Programme in 2016 from the above three states. As per the program, all malaria cases need to be notified within 1 day and investigated within 3 days of diagnosis and response to control (active case detection and control) should be taken for all indigenous malaria cases within 7 days of diagnosis. A total of 959 malaria cases were diagnosed from the study area in 2016. Of these, the case NICR details were available only for 312 (32.5%) malaria cases. Of 312 cases, the case notification, investigation, and classification were carried out within 3 days of malaria diagnosis in 95.5% cases (298/312). Of 208 indigenous malaria cases (66.7%, 208/312), response to control was taken in 96.6% (201/208) within 7 days of diagnosis. The timeline at each stage of the strategy namely case notification, investigation, classification, and response to control was followed, and response action was taken in nearly all indigenous malaria cases for the available case information. Strengthening of health information and monitoring system is needed to avoid missing information. Future research on feasibility of mobile/tablet-based surveillance system and providing response to all cases including imported malaria can be further studied.

  13. Reinventing classics: the hidden design strategies of renowned chefs

    OpenAIRE

    Agogué , Marine; Hatchuel , Armand

    2015-01-01

    International audience; Reinventing classics is a well-used yet complex design pattern. Indeed, a reinterpreted classic needs to relate to the original object while simultaneously challenging the initial model and providing a new and fresh look to the well established classic. However, this design strategy remains understudied, and we aimed to contribute to the literature by addressing the lack of theoretical models for reinventing classics. Reinterpreting tradition is a key process for chefs...

  14. Supply chain implications of sustainable design strategies for electronics products

    OpenAIRE

    De Coster, R; Bateman, RJ; Plant, AVC

    2012-01-01

    Increasing legislative and consumer pressures on manufacturers to improve sustainability necessitates that manufacturers consider the overall life cycle and not be scope restricted in creating products. Product strategies to improve sustainability have design implications as many of the decisions made during the design stage will then determine the environmental performance of the final product. Coordination across the supply chain is potentially beneficial as products with improved energy ef...

  15. Horizontal infection control strategy decreases methicillin-resistant Staphylococcus aureus infection and eliminates bacteremia in a surgical ICU without active surveillance.

    Science.gov (United States)

    Traa, Maria X; Barboza, Lorena; Doron, Shira; Snydman, David R; Noubary, Farzad; Nasraway, Stanley A

    2014-10-01

    Methicillin-resistant Staphylococcus aureus infection is a significant contributor to morbidity and mortality in hospitalized patients worldwide. Numerous healthcare bodies in Europe and the United States have championed active surveillance per the "search and destroy" model. However, this strategy is associated with significant economic, logistical, and patient costs without any impact on other hospital-acquired pathogens. We evaluated whether horizontal infection control strategies could decrease the prevalence of methicillin-resistant S. aureus infection in the ICU, without the need for active surveillance. Retrospective, observational study in the surgical ICU of a tertiary care medical center in Boston, MA, from 2005 to 2012. A total of 6,697 patients in the surgical ICU. Evidence-based infection prevention strategies were implemented in an iterative fashion, including 1) hand hygiene program with refresher education campaign, 2) chlorhexidine oral hygiene program, 3) chlorhexidine bathing, 4) catheter-associated bloodstream infection program, and 5) daily goals sheets. The prevalence of methicillin-resistant S. aureus infection fell from 2.66 to 0.69 per 1,000 patient days from 2005 to 2012, an average decrease of 21% per year. The biggest decline in rate of infection was detected in 2008, which may suggest that the catheter-associated bloodstream infection prevention program was particularly effective. Among 4,478 surgical ICU admissions over the last 5 years, not a single case of methicillin-resistant S. aureus bacteremia was observed. Aggressive multifaceted horizontal infection control is an effective strategy for reducing the prevalence of methicillin-resistant S. aureus infection and eliminating methicillin-resistant S. aureus bacteremia in the ICU without the need for active surveillance and decontamination.

  16. Instructional Design-Based Research on Problem Solving Strategies

    Science.gov (United States)

    Emre-Akdogan, Elçin; Argün, Ziya

    2016-01-01

    The main goal of this study is to find out the effect of the instructional design method on the enhancement of problem solving abilities of students. Teaching sessions were applied to ten students who are in 11th grade, to teach them problem solving strategies which are working backwards, finding pattern, adopting a different point of view,…

  17. Product design and business model strategies for a circular economy

    NARCIS (Netherlands)

    Bocken, N.M.P.; de Pauw, I.C.; Bakker, C.A.; van der Grinten, B.

    The transition within business from a linear to a circular economy brings with it a range of practical challenges for companies. The following question is addressed: What are the product design and business model strategies for
    companies that want to move to a circular economy model? This paper

  18. Development of Mitigation Strategy for Beyond Design Basis External Events for NRC Design Certification

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong Hak; Lee, Jae Jong; Kim, Myung Ki [KHNP Central Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    In this study, how to develop FLEX strategy for beyond-design-basis external events for U. S. NRC design certification is examined. The development method of FLEX strategy for U. S. NRC design certification is examined. The applicants should make unit-specific FLEX strategy and establish the minimum coping capabilities consistent with unit-specific evaluation of the potential impacts and responses to BDBEEs. NEI 12-06 outlines the process to define and deploy the diverse and flexible mitigation strategies(FLEX strategy) that will increase defense-in-depth for beyond-design-basis scenarios to address the extended loss of alternating current (ac) power (ELAP) and loss of normal access to the ultimate heat sink (LUHS) occurring simultaneously at all units on a site. The order (EA-12-049) is issued to all reactor licensees, including holders of active, Construction Permit (CP) holders, and Combined License (COL) holders. Applicants for the new reactor design certification should prepare and submit FLEX strategy for NRC staff's review. Site-specific data related with the new reactor can't be determined during the new reactor design certification applications so that the unit-specific FLEX strategy should be developed.

  19. Development of Mitigation Strategy for Beyond Design Basis External Events for NRC Design Certification

    International Nuclear Information System (INIS)

    Kim, Dong Hak; Lee, Jae Jong; Kim, Myung Ki

    2013-01-01

    In this study, how to develop FLEX strategy for beyond-design-basis external events for U. S. NRC design certification is examined. The development method of FLEX strategy for U. S. NRC design certification is examined. The applicants should make unit-specific FLEX strategy and establish the minimum coping capabilities consistent with unit-specific evaluation of the potential impacts and responses to BDBEEs. NEI 12-06 outlines the process to define and deploy the diverse and flexible mitigation strategies(FLEX strategy) that will increase defense-in-depth for beyond-design-basis scenarios to address the extended loss of alternating current (ac) power (ELAP) and loss of normal access to the ultimate heat sink (LUHS) occurring simultaneously at all units on a site. The order (EA-12-049) is issued to all reactor licensees, including holders of active, Construction Permit (CP) holders, and Combined License (COL) holders. Applicants for the new reactor design certification should prepare and submit FLEX strategy for NRC staff's review. Site-specific data related with the new reactor can't be determined during the new reactor design certification applications so that the unit-specific FLEX strategy should be developed

  20. Strategies and arguments of ergonomic design for sustainability.

    Science.gov (United States)

    Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

    2012-01-01

    Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

  1. Passive solar design strategies: Remodeling guidelines for conserving energy at home

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The idea of passive solar is simple, but applying it effectively does require information and attention to the details of design and construction. Some passive solar techniques are modest and low-cost, and require only small changes in remodeler's typical practice. At the other end of the spectrum, some passive solar systems can almost eliminate a house's need for purchased heating (and in some cases, cooling) energy -- but probably at a relatively high first cost. In between are a broad range of energy-conserving passive solar techniques. Whether or not they are cost-effective, practical and attractive enough to offer a market advantage to any individual remodeler depends on very specific factors such as local costs, climate, and market characteristics. Passive solar design strategies: Remodeling Guidelines For Conserving Energy At Homes is written to help give remodelers the information they need to make these decisions. Passive Solar Design Strategies is a package in three basic parts: The Guidelines contain information about passive solar techniques and how they work, and provides specific examples of systems which will save various percentages of energy; The Worksheets offer a simple, fill-in-the-blank method to pre-evaluate the performance of a specific design; The Worked Example demonstrates how to complete the worksheets for a typical residence.

  2. Passive solar design strategies: Remodeling guidelines for conserving energy at home. [Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The idea of passive solar is simple, but applying it effectively does require information and attention to the details of design and construction. Some passive solar techniques are modest and low-cost, and require only small changes in remodeler`s typical practice. At the other end of the spectrum, some passive solar systems can almost eliminate a house`s need for purchased heating (and in some cases, cooling) energy -- but probably at a relatively high first cost. In between are a broad range of energy-conserving passive solar techniques. Whether or not they are cost-effective, practical and attractive enough to offer a market advantage to any individual remodeler depends on very specific factors such as local costs, climate, and market characteristics. Passive solar design strategies: Remodeling Guidelines For Conserving Energy At Homes is written to help give remodelers the information they need to make these decisions. Passive Solar Design Strategies is a package in three basic parts: The Guidelines contain information about passive solar techniques and how they work, and provides specific examples of systems which will save various percentages of energy; The Worksheets offer a simple, fill-in-the-blank method to pre-evaluate the performance of a specific design; The Worked Example demonstrates how to complete the worksheets for a typical residence.

  3. Passive solar design strategies: Remodeling guidelines for conserving energy at home

    Science.gov (United States)

    The idea of passive solar is simple, but applying it effectively does require information and attention to the details of design and construction. Some passive solar techniques are modest and low-cost, and require only small changes in remodeler's typical practice. At the other end of the spectrum, some passive solar systems can almost eliminate a house's need for purchased heating (and in some cases, cooling) energy - but probably at a relatively high first cost. In between are a broad range of energy-conserving passive solar techniques. Whether or not they are cost-effective, practical, and attractive enough to offer a market advantage to any individual remodeler depends on very specific factors such as local costs, climate, and market characteristics. Passive Solar Design Strategies: Remodeling Guidelines For Conserving Energy At Home is written to help give remodelers the information they need to make these decisions. Passive Solar Design Strategies is a package in three basic parts: the guidelines contain information about passive solar techniques and how they work, and provides specific examples of systems which will save various percentages of energy; the worksheets offer a simple, fill-in-the-blank method to pre-evaluate the performance of a specific design; and the worked example demonstrates how to complete the worksheets for a typical residence.

  4. A design strategy for magnetorheological dampers using porous valves

    International Nuclear Information System (INIS)

    Hu, W; Robinson, R; Wereley, N M

    2009-01-01

    To design a porous-valve-based magnetorheological (MR) damper, essential design parameters are presented. The key elements affecting the damper performance are identified using flow analysis in porous media and an empirical magnetic field distribution in the porous valve. Based on a known MR fluid, the relationship between the controllable force of the damper and the porous valve characteristics, i.e. porosity and tortuosity, is developed. The effect of the porosity and tortuosity on the field-off damping force is exploited by using semi-empirical flow analysis. The critical flow rate for the onset of nonlinear viscous damping force is determined. Using the above design elements, an MR damper using by-pass porous valve is designed and tested. The experimental damper force and equivalent damping are compared with the predicted results to validate this design strategy.

  5. A design strategy for magnetorheological dampers using porous valves

    Energy Technology Data Exchange (ETDEWEB)

    Hu, W; Robinson, R; Wereley, N M [Smart Structures Laboratory, Alfred Gessow Rotorcraft Center, Department of Aerospace Engineering, University of Maryland, College Park, MD 20742 (United States)], E-mail: wereley@umd.edu

    2009-02-01

    To design a porous-valve-based magnetorheological (MR) damper, essential design parameters are presented. The key elements affecting the damper performance are identified using flow analysis in porous media and an empirical magnetic field distribution in the porous valve. Based on a known MR fluid, the relationship between the controllable force of the damper and the porous valve characteristics, i.e. porosity and tortuosity, is developed. The effect of the porosity and tortuosity on the field-off damping force is exploited by using semi-empirical flow analysis. The critical flow rate for the onset of nonlinear viscous damping force is determined. Using the above design elements, an MR damper using by-pass porous valve is designed and tested. The experimental damper force and equivalent damping are compared with the predicted results to validate this design strategy.

  6. Malaria and the mobile and migrant population in Cambodia: a population movement framework to inform strategies for malaria control and elimination.

    Science.gov (United States)

    Guyant, Philippe; Canavati, Sara E; Chea, Nguon; Ly, Po; Whittaker, Maxine Anne; Roca-Feltrer, Arantxa; Yeung, Shunmay

    2015-06-20

    The relationships between human population movement (HPM) and health are a concern at global level. In the case of malaria, those links are crucial in relation to the spread of drug resistant parasites and to the elimination of malaria in the Greater Mekong sub-Region (GMS) and beyond. The mobile and migrant populations (MMP) who are involved in forest related activities are both at high risk of being infected with malaria and at risk of receiving late and sub-standard treatment due to poor access to health services. In Cambodia, in 2012, the National Malaria Control Programme (NMCP) identified, as a key objective, the development of a specific strategy for MMPs in order to address these challenges. A population movement framework (PMF) for malaria was developed and operationalized in order to contribute to this strategy. A review of the published and unpublished literature was conducted. Based on a synthesis of the results, information was presented and discussed with experienced researchers and programme managers in the Cambodian NMCP and led to the development and refinement of a PMF for malaria. The framework was "tested" for face and content validity with national experts through a workshop approach. In the literature, HPM has been described using various spatial and temporal dimensions both in the context of the spread of anti-malarial drug resistance, and in the context of malaria elimination and previous classifications have categorized MMPs in Cambodia and the GMS through using a number of different criteria. Building on these previous models, the PMF was developed and then refined and populated with in-depth information relevant to Cambodia collected from social science research and field experiences in Cambodia. The framework comprises of the PMF itself, MMP activity profiles and a Malaria Risk Index which is a summation of three related indices: a vulnerability index, an exposure index and an access index which allow a qualitative ranking of malaria

  7. Multidimensional (OLAP) Analysis for Designing Dynamic Learning Strategy

    Science.gov (United States)

    Rozeva, A.; Deliyska, B.

    2010-10-01

    Learning strategy in an intelligent learning system is generally elaborated on the basis of assessment of the following factors: learner's time for reaction, content of the learning object, amount of learning material in a learning object, learning object specification, e-learning medium and performance control. Current work proposes architecture for dynamic learning strategy design by implementing multidimensional analysis model of learning factors. The analysis model concerns on-line analytical processing (OLAP) of learner's data structured as multidimensional cube. Main components of the architecture are analysis agent for performing the OLAP operations on learner data cube, adaptation generator and knowledge selection agent for performing adaptive navigation in the learning object repository. The output of the analysis agent is involved in dynamic elaboration of learning strategy that fits best to learners profile and behavior. As a result an adaptive learning path for individual learner and for learner groups is generated.

  8. Design Requirements, Epistemic Uncertainty and Solution Development Strategies in Software Design

    DEFF Research Database (Denmark)

    Ball, Linden J.; Onarheim, Balder; Christensen, Bo Thomas

    2010-01-01

    This paper investigates the potential involvement of “epistemic uncertainty” in mediating between complex design requirements and strategic switches in software design strategies. The analysis revealed that the designers produced an initial “first-pass” solution to the given design brief in a bre...... a view of software design as involving a mixed breadth-first and depth-first solution development approach, with strategic switching to depth-first design being triggered by requirement complexity and being mediated by associated feelings of uncertainty....

  9. Designing multiple ligands - medicinal chemistry strategies and challenges.

    Science.gov (United States)

    Morphy, Richard; Rankovic, Zoran

    2009-01-01

    It has been widely recognised over the recent years that parallel modulation of multiple biological targets can be beneficial for treatment of diseases with complex etiologies such as cancer asthma, and psychiatric disease. In this article, current strategies for the generation of ligands with a specific multi-target profile (designed multiple ligands or DMLs) are described and a number of illustrative example are given. Designing multiple ligands is frequently a challenging endeavour for medicinal chemists, with the need to appropriately balance affinity for 2 or more targets whilst obtaining physicochemical and pharmacokinetic properties that are consistent with the administration of an oral drug. Given that the properties of DMLs are influenced to a large extent by the proteomic superfamily to which the targets belong and the lead generation strategy that is pursued, an early assessment of the feasibility of any given DML project is essential.

  10. Parameters Design for Logarithmic Quantizer Based on Zoom Strategy

    Directory of Open Access Journals (Sweden)

    Jingjing Yan

    2017-01-01

    Full Text Available This paper is concerned with the problem of designing suitable parameters for logarithmic quantizer such that the closed-loop system is asymptotic convergent. Based on zoom strategy, we propose two methods for quantizer parameters design, under which it ensures that the state of the closed-loop system can load in the invariant sets after some certain moments. Then we obtain that the quantizer is unsaturated, and thus the quantization errors are bounded under the time-varying logarithm quantization strategy. On that basis, we obtain that the closed-loop system is asymptotic convergent. A benchmark example is given to show the usefulness of the proposed methods, and the comparison results are illustrated.

  11. Diabetes City: How Urban Game Design Strategies Can Help Diabetics

    Science.gov (United States)

    Knöll, Martin

    Computer Games are about to leave their “electronic shells” and enter the city. So-called Serious Pervasive Games (SPGs) [1] allow for hybrid - simultaneously physical and virtual - experiences, applying technologies of ubiquitous computing, communication and “intelligent” interfaces. They begin to focus on non-entertaining purposes. The following article a) presents game design strategies as a missing link between pervasive computing, Ambient Intelligence and user’s everyday life. Therefore it spurs a discussion how Pervasive Healthcare focusing on the therapy and prevention of chronic diseases can benefit from urban game design strategies. b) Moreover the article presents the development and work in progress of “DiabetesCity“ - an educational game prototype for young diabetics.

  12. A proposal of optimal sampling design using a modularity strategy

    Science.gov (United States)

    Simone, A.; Giustolisi, O.; Laucelli, D. B.

    2016-08-01

    In real water distribution networks (WDNs) are present thousands nodes and optimal placement of pressure and flow observations is a relevant issue for different management tasks. The planning of pressure observations in terms of spatial distribution and number is named sampling design and it was faced considering model calibration. Nowadays, the design of system monitoring is a relevant issue for water utilities e.g., in order to manage background leakages, to detect anomalies and bursts, to guarantee service quality, etc. In recent years, the optimal location of flow observations related to design of optimal district metering areas (DMAs) and leakage management purposes has been faced considering optimal network segmentation and the modularity index using a multiobjective strategy. Optimal network segmentation is the basis to identify network modules by means of optimal conceptual cuts, which are the candidate locations of closed gates or flow meters creating the DMAs. Starting from the WDN-oriented modularity index, as a metric for WDN segmentation, this paper proposes a new way to perform the sampling design, i.e., the optimal location of pressure meters, using newly developed sampling-oriented modularity index. The strategy optimizes the pressure monitoring system mainly based on network topology and weights assigned to pipes according to the specific technical tasks. A multiobjective optimization minimizes the cost of pressure meters while maximizing the sampling-oriented modularity index. The methodology is presented and discussed using the Apulian and Exnet networks.

  13. Designing equitable antiretroviral allocation strategies in resource-constrained countries.

    Directory of Open Access Journals (Sweden)

    David P Wilson

    2005-02-01

    Full Text Available Recently, a global commitment has been made to expand access to antiretrovirals (ARVs in the developing world. However, in many resource-constrained countries the number of individuals infected with HIV in need of treatment will far exceed the supply of ARVs, and only a limited number of health-care facilities (HCFs will be available for ARV distribution. Deciding how to allocate the limited supply of ARVs among HCFs will be extremely difficult. Resource allocation decisions can be made on the basis of many epidemiological, ethical, or preferential treatment priority criteria.Here we use operations research techniques, and we show how to determine the optimal strategy for allocating ARVs among HCFs in order to satisfy the equitable criterion that each individual infected with HIV has an equal chance of receiving ARVs. We present a novel spatial mathematical model that includes heterogeneity in treatment accessibility. We show how to use our theoretical framework, in conjunction with an equity objective function, to determine an optimal equitable allocation strategy (OEAS for ARVs in resource-constrained regions. Our equity objective function enables us to apply the egalitarian principle of equity with respect to access to health care. We use data from the detailed ARV rollout plan designed by the government of South Africa to determine an OEAS for the province of KwaZulu-Natal. We determine the OEAS for KwaZulu-Natal, and we then compare this OEAS with two other ARV allocation strategies: (i allocating ARVs only to Durban (the largest urban city in KwaZulu-Natal province and (ii allocating ARVs equally to all available HCFs. In addition, we compare the OEAS to the current allocation plan of the South African government (which is based upon allocating ARVs to 17 HCFs. We show that our OEAS significantly improves equity in treatment accessibility in comparison with these three ARV allocation strategies. We also quantify how the size of the

  14. AGROECOLOGY: PRINCIPLES AND STRATEGIES FOR THE DESIGN OF SUSTAINABLE AGROECOSYSTEMS

    Directory of Open Access Journals (Sweden)

    João Carlos Canuto

    2017-04-01

    Full Text Available The theme of this paper is the debate on principles and strategies for designing sustainable agricultural systems. The paper builds on a broad approach to principles, moving to the more specific approach to strategies and finalizing with a micro-scale perspective on the practice of drawings and the consequences of each possible option. The objective is first of all to put to the debate the dialectic between conceptual plurality and unity in Agroecology. The problem in focus is to situate more clearly what are sustainable agroecosystems and, as a consequence, how to connect principles and strategies to make them viable. Regarding the theoretical reference, we use the classic authors of Agroecology and some critical articles on the conceptual question. The methodology that gives foundation to the approach is based on the author's theoretical and practical experience, with a qualitative, subjective and intuitive character. The results are only the presentation of ideas in order to contribute to the conceptual debate now in vogue and also to glimpse, on a smaller scale, the practical issue of sustainable agroecosystems designs.

  15. Paradigms for adaptive statistical information designs: practical experiences and strategies.

    Science.gov (United States)

    Wang, Sue-Jane; Hung, H M James; O'Neill, Robert

    2012-11-10

    design. We highlight the substantial risk of planning the sample size for confirmatory trials when information is very uninformative and stipulate the advantages of adaptive statistical information designs for planning exploratory trials. Practical experiences and strategies as lessons learned from more recent adaptive design proposals will be discussed to pinpoint the improved utilities of adaptive design clinical trials and their potential to increase the chance of a successful drug development. Published 2012. This article is a US Government work and is in the public domain in the USA.

  16. DESIGNING STRATEGIES FOR IMPROVING TOTAL QUALITY MANAGEMENT IN MANUFACTURING INDUSTRIES

    Directory of Open Access Journals (Sweden)

    Alfian Nur Ubay

    2017-05-01

    Full Text Available This research was aimed at designing strategies for improving total quality management at CV XYZ and PT HIJ. The research locations were selected intentionally with the consideration that the company is a middle class company that started to apply a study in line with the research topic. The experts were chosen using an approach method. This research used a descriptive approach and quantitative analysis through questionnaires using purposive sampling. The stages began with data processing, i.e. testing the questionnaire quality through validity and reliability tests, making a causality diagram, evaluating the implementation levels of each company by giving evaluation scales based on the existing condition, making House of Quality (HOQ using QFD methods, and then analyzing the problem solutions produced from the QFD methods with 5W + IH analysis, and finally determining the improvement priorities using Fuzzy AHP methods. The results were the strategies for improving total quality management /TQM of CV XYZ, namely the factor that plays the most important role was improving the quality management performance. The actor that has the competence to carry out the TQM improvement is the director. The prioritized goal to be achieved is a commitment to improve the quality of goods and services.  The prioritized strategy used in improving TQM is carrying out SOP consistently.Keywords: strategies, improvement, TQM, manufacturing company, fuzzy AHPABSTRAKPenelitian ini bertujuan merancang strategi peningkatan manajemen mutu terpadu pada CV XYZ dan PT HIJ. Pemilihan lokasi penelitian dilakukan secara sengaja dengan pertimbangan bahwa perusahaan tersebut merupakan perusahaan kelas menengah yang mulai menerapkan kajian sesuai dengan topik penelitian. Penentuan pakar dilakukan dengan metode pendekatan secara sengaja. Adapun penelitian ini menggunakan pendekatan deskriptif dan analisa kuantitatif dengan menyebarkan kuesioner secara sengaja (purposive sampling

  17. Evaluation of design, leak monitoring, dnd NDEA strategies to assure PBMR Helium pressure boundary reliability - HTR2008-58037

    International Nuclear Information System (INIS)

    Fleming, K. N.; Smit, K.

    2008-01-01

    This paper discusses the reliability and integrity management (RIM) strategies that have been applied in the design of the PBMR passive metallic components for the helium pressure boundary (HPB) to meet reliability targets and to evaluate what combination of strategies are needed to meet the targets. The strategies considered include deterministic design strategies to reduce or eliminate the potential for specific damage mechanisms, use of an on-line leak monitoring system and associated design provisions that provide a high degree of leak detection reliability, and periodic nondestructive examinations combined with repair and replacement strategies to reduce the probability that degradation would lead to pipe ruptures. The PBMR RIM program for passive metallic piping components uses a leak-before-break philosophy. A Markov model developed for use in LWR risk-informed in-service inspection evaluations was applied to investigate the impact of alternative RIM strategies and plant age assumptions on the pipe rupture frequencies as a function of rupture size. Some key results of this investigation are presented in this paper. (authors)

  18. Design strategy for terahertz quantum dot cascade lasers.

    Science.gov (United States)

    Burnett, Benjamin A; Williams, Benjamin S

    2016-10-31

    The development of quantum dot cascade lasers has been proposed as a path to obtain terahertz semiconductor lasers that operate at room temperature. The expected benefit is due to the suppression of nonradiative electron-phonon scattering and reduced dephasing that accompanies discretization of the electronic energy spectrum. We present numerical modeling which predicts that simple scaling of conventional quantum well based designs to the quantum dot regime will likely fail due to electrical instability associated with high-field domain formation. A design strategy adapted for terahertz quantum dot cascade lasers is presented which avoids these problems. Counterintuitively, this involves the resonant depopulation of the laser's upper state with the LO-phonon energy. The strategy is tested theoretically using a density matrix model of transport and gain, which predicts sufficient gain for lasing at stable operating points. Finally, the effect of quantum dot size inhomogeneity on the optical lineshape is explored, suggesting that the design concept is robust to a moderate amount of statistical variation.

  19. The Problem Solver and The Artisan Designer: Strategies for Utilizing Design Idea Archives

    DEFF Research Database (Denmark)

    Inie, Nanna; Endo, Allison; Dow, Steven

    2018-01-01

    This paper presents the results of an extensive qualitative study investigating how professional designers utilize personal idea archives. While we know that designers archive creative ideas in different formats and on different platforms, we know little about if and how designers utilize...... these idea archives in their daily practice. Through a series of interviews (n=20) and walkthroughs of design idea archives, we identified two archetypal strategies. The Problem Solver is concerned with the task at hand, keeps relevant ideas around, and discards them when the ideas have served their purpose...

  20. Towards a strategy of reliable fusion first-wall design

    International Nuclear Information System (INIS)

    Schultz, J.H.

    1981-05-01

    Fusion first walls are subject to a large number of possible failure mechanisms, including erosion due to sputtering, arcing, blistering and vaporization and crack growth due to thermal and magnetic stresses. Each of these failure mechanisms is poorly characterized and has the potential of being severe. A strategy for designing reliably in the face of great uncertainty is discussed. Topological features beneficial to reactor availability are identified. The integration of limiter pumping with rf wave launching is discussed, as a means of simplifying reactor design. The concept of a sewer limiter is introduced, as a possible long-life limiter topology. The concept of flexible armor is discussed, as a means of extending maximum life

  1. Integrated design strategy for product life-cycle management

    Science.gov (United States)

    Johnson, G. Patrick

    2001-02-01

    Two major trends suggest new considerations for environmentally conscious manufacturing (ECM) -- the continuation of dematerialization and the growing trend toward goods becoming services. A diversity of existing research could be integrated around those trends in ways that can enhance ECM. Major research-based achievements in information, computation, and communications systems, sophisticated and inexpensive sensing capabilities, highly automated and precise manufacturing technologies, and new materials continue to drive the phenomenon of dematerialization - the reduction of the material and energy content of per capita GDP. Knowledge is also growing about the sociology, economics, mathematics, management and organization of complex socio-economic systems. And that has driven a trend towards goods evolving into services. But even with these significant trends, the value of material, energy, information and human resources incorporated into the manufacture, use and disposal of modern products and services often far exceeds the benefits realized. Multi-disciplinary research integrating these drivers with advances in ECM concepts could be the basis for a new strategy of production. It is argued that a strategy of integrating information resources with physical and human resources over product life cycles, together with considering products as streams of service over time, could lead to significant economic payoff. That strategy leads to an overall design concept to minimize costs of all resources over the product life cycle to more fully capture benefits of all resources incorporated into modern products. It is possible by including life cycle monitoring, periodic component replacement, re-manufacture, salvage and human factor skill enhancement into initial design.

  2. Strategy revealing phenotypic differences among synthetic oscillator designs.

    Science.gov (United States)

    Lomnitz, Jason G; Savageau, Michael A

    2014-09-19

    Considerable progress has been made in identifying and characterizing the component parts of genetic oscillators, which play central roles in all organisms. Nonlinear interaction among components is sufficiently complex that mathematical models are required to elucidate their elusive integrated behavior. Although natural and synthetic oscillators exhibit common architectures, there are numerous differences that are poorly understood. Utilizing synthetic biology to uncover basic principles of simpler circuits is a way to advance understanding of natural circadian clocks and rhythms. Following this strategy, we address the following questions: What are the implications of different architectures and molecular modes of transcriptional control for the phenotypic repertoire of genetic oscillators? Are there designs that are more realizable or robust? We compare synthetic oscillators involving one of three architectures and various combinations of the two modes of transcriptional control using a methodology that provides three innovations: a rigorous definition of phenotype, a procedure for deconstructing complex systems into qualitatively distinct phenotypes, and a graphical representation for illuminating the relationship between genotype, environment, and the qualitatively distinct phenotypes of a system. These methods provide a global perspective on the behavioral repertoire, facilitate comparisons of alternatives, and assist the rational design of synthetic gene circuitry. In particular, the results of their application here reveal distinctive phenotypes for several designs that have been studied experimentally as well as a best design among the alternatives that has yet to be constructed and tested.

  3. A Minimum Shuffle Core Design Strategy for ESBWR

    International Nuclear Information System (INIS)

    Karve, A.A.; Fawcett, R.M.

    2008-01-01

    The Economic Simplified Boiling Water Reactor (ESBWR) is GEH's next evolution of advanced BWR technology. There are 1132 fuel bundles in the core and the thermal power is 4500 MWt. Similar to conventional plants there is an outage after a specified period of operation, when the plant shuts down. During the outage a specified fraction of fuel bundles are discharged from the core, it is loaded with the same fraction of fresh fuel, and fuel is shuffled to obtain an optimum core design that meets the goals for a successful operation of the next cycle. The discharge, load, and the associated shuffles are time-consuming and expensive tasks that impact the overall outage schedule and costs. Therefore, there is an incentive to keep maneuvers to a minimum and to perform them more efficiently. The benefits for a large core, such as the ESBWR with 1132 fuel bundles, are escalated. This study focuses on a core reload design strategy to minimize the total number of shuffles during an outage. A traditional equilibrium cycle is used as a reference basis, which sets the reference number of shuffles. In the minimum shuffle core design however, a set of two equilibrium cycles (N and N+1, referred to as a 'bi- equilibrium' cycle) is envisioned where the fresh fuel of cycle N (that becomes the once-burnt fuel of cycle N+1) ideally does not move in the two cycles. The cost of fuel efficiency is determined for obtaining such a core loading by comparing it to the traditional equilibrium cycle. There are several additional degrees of freedom when designing a bi-equilibrium cycle that could be utilized, and the potential benefits of these flexibilities are assessed. In summary, the feasibility of a minimum shuffle fuel cycle and core design for an ESBWR is studied. The cost of fuel efficiency is assessed in comparison to the traditional design. (authors)

  4. Interactive Spacecraft Trajectory Design Strategies Featuring Poincare Map Topology

    Science.gov (United States)

    Schlei, Wayne R.

    Space exploration efforts are shifting towards inexpensive and more agile vehicles. Versatility regarding spacecraft trajectories refers to the agility to correct deviations from an intended path or even the ability to adapt the future path to a new destination--all with limited spaceflight resources (i.e., small DeltaV budgets). Trajectory design methods for such nimble vehicles incorporate equally versatile procedures that allow for rapid and interactive decision making while attempting to reduce Delta V budgets, leading to a versatile trajectory design platform. A versatile design paradigm requires the exploitation of Poincare map topology , or the interconnected web of dynamical structures, existing within the chaotic dynamics of multi-body gravitational models to outline low-Delta V transfer options residing nearby to a current path. This investigation details an autonomous procedure to extract the periodic orbits (topology nodes) and correlated asymptotic flow structures (or the invariant manifolds representing topology links). The autonomous process summarized in this investigation (termed PMATE) overcomes discontinuities on the Poincare section that arise in the applied multi-body model (the planar circular restricted three-body problem) and detects a wide variety of novel periodic orbits. New interactive capabilities deliver a visual analytics foundation for versatile spaceflight design, especially for initial guess generation and manipulation. Such interactive strategies include the selection of states and arcs from Poincare section visualizations and the capabilities to draw and drag trajectories to remove dependency on initial state input. Furthermore, immersive selection is expanded to cull invariant manifold structures, yielding low-DeltaV or even DeltaV-free transfers between periodic orbits. The application of interactive design strategies featuring a dense extraction of Poincare map topology is demonstrated for agile spaceflight with a simple

  5. MATH INSTRUCTIONAL MEDIA DESIGN USING COMPUTER FOR COMPLETION OF TWO-VARIABLES LINEAR EQUATION SYSTEM BY ELIMINATION METHOD

    Directory of Open Access Journals (Sweden)

    Nurbaiti

    2017-03-01

    Full Text Available Science and technology have been rapidly evolved in some fields of knowledge, including mathematics. Such development can contribute to improvements on the learning process that encourage students and teachers to enhance their abilities and performances. In delivering the material on the linear equation system with two variables (SPLDV, the conventional teaching method where teachers become the center of the learning process is still well-practiced. This method would cause the students get bored and have difficulties to understand the concepts they are learning. Therefore, in order to the learning of SPLDV easy, an interesting, interactive media that the students and teachers can apply is necessary. This media is designed using GUI MATLAB and named as students’ electronic worksheets (e-LKS. This program is intended to help students in finding and understanding the SPLDV concepts more easily. This program is also expected to improve students’ motivation and creativity in learning the material. Based on the test using the System Usability Scale (SUS, the design of interactive mathematics learning media of the linear equation system with Two Variables (SPLDV gets grade B (excellent, meaning that this learning media is proper to be used for Junior High School students of grade VIII.

  6. Suggestions on performance of finite element limit analysis for eliminating the necessity of stress classifications in design and defect assessment

    Energy Technology Data Exchange (ETDEWEB)

    Fujioka, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    2001-07-01

    In structural design of a nuclear power component, stress classification from elastic stress analysis resultants is often used. Alternatively, to improve accuracy, finite element limit analysis may be performed. This paper examines some issues relating to the use of limit analysis; specifically, the treatment of multiple applied loads and the definition of the limit load from analysis using hardening plasticity laws. These are addressed both by detailed analysis for a simple geometry and by using the reference stress approach to estimate the inelastic displacement. The proposals are also applicable to a defect assessment of a cracked component, and treatment of distributed loads. It is shown that multiple or distributed loads should be treated as if they were applied proportionally irrespective of the actual nature of loads, and that the limit load from analysis with general plasticity laws may be estimated using a newly suggested reduced elastic slope method. (author)

  7. Suggestions on performance of finite element limit analysis for eliminating the necessity of stress classifications in design and defect assessment

    International Nuclear Information System (INIS)

    Fujioka, T.

    2001-01-01

    In structural design of a nuclear power component, stress classification from elastic stress analysis resultants is often used. Alternatively, to improve accuracy, finite element limit analysis may be performed. This paper examines some issues relating to the use of limit analysis; specifically, the treatment of multiple applied loads and the definition of the limit load from analysis using hardening plasticity laws. These are addressed both by detailed analysis for a simple geometry and by using the reference stress approach to estimate the inelastic displacement. The proposals are also applicable to a defect assessment of a cracked component, and treatment of distributed loads. It is shown that multiple or distributed loads should be treated as if they were applied proportionally irrespective of the actual nature of loads, and that the limit load from analysis with general plasticity laws may be estimated using a newly suggested reduced elastic slope method. (author)

  8. Design strategy for control of inherently safe reactors

    International Nuclear Information System (INIS)

    Chisholm, G.H.

    1984-01-01

    Reactor power plant safety is assured through a combination of engineered barriers to radiation release (e.g., reactor containment) in combination with active reactor safety systems to shut the reactor down and remove decay heat. While not specifically identified as safety systems, the control systems responsible for continuous operation of plant subsystems are the first line of defense for mitigating radiation releases and for plant protection. Inherently safe reactors take advantage of passive system features for decay-heat removal and reactor shutdown functions normally ascribed to active reactor safety systems. The advent of these reactors may permit restructuring of the present control system design strategy. This restructuring is based on the fact that authority for protection against unlikely accidents is, as much as practical, placed upon the passive features of the system instead of the traditional placement upon the PPS. Consequently, reactor control may be simplified, allowing the reliability of control systems to be improved and more easily defended

  9. Design of Mobile Learning strategies through blended learning enviroment

    Directory of Open Access Journals (Sweden)

    Oscar Boude Figueredo

    2017-06-01

    Full Text Available This paper presents the results of an investigation that developed in the municipality of Fusagasuga in late 2013 by the University of La Sabana are presented, whose objective was to determine the contribution of a process of teacher training in the design of strategies for mobile learning. A methodological level a qualitative study, with exploratory scope, was conducted through a case study. In it, 245 teachers participated in 13 educational institu-tions. The main results show that teachers recognize the importance of using mobile devices to support the development of their teaching practices, and promote the participation of their students as well as some aspects that hinder and facilitate the development of this type of training processes. The main conclusion is that although the use of devices is increasingly in classrooms, this use does not respond to a didactic planning by the teacher.

  10. Mechanism Design of Fashion Virtual Enterprise under Monitoring Strategy

    Directory of Open Access Journals (Sweden)

    Min Huang

    2014-01-01

    Full Text Available Designing a revenue sharing contract to prevent the moral hazard is one of the most important issues in virtual enterprise (VE. As the partners’ productive effort level cannot be observed by the owner and other partners, there is usually moral hazard problem in VE. To mitigate the moral hazard, the owner sets the monitoring effort with monitoring cost. Considering a risk-neutral owner and multiple downside risk-averse partners, the owner’s problem of determining the monitoring effort and incentive intensity to maximize his profit while the partners determine their productive effort to maximize their profit is addressed. The principal agent based model of this problem is proposed. By solving the model, the optimal strategy of owner and partner is derived. By comparing with the no monitoring scenario, we find that implementing suitable monitoring strategy can reduce the moral hazard effectively. Finally, by analyzing the partners’ risk attitude, the result reveals that the lower the risk level of the partner is, the more the owner wants. These results suggest that VE should not only focus on the risk attitude but also on monitoring.

  11. Rational design of diagnostic and vaccination strategies for tuberculosis

    Directory of Open Access Journals (Sweden)

    Sibele Borsuk

    Full Text Available The development of diagnostic tests which can readily differentiate between vaccinated and tuberculosis-infected individuals is crucial for the wider utilization of bacillus Calmette-Guérin (BCG as vaccine in humans and animals. BCG_0092 is an antigen that elicits specific delayed type hypersensitivity reactions similar in size and morphological aspects to that elicited by purified protein derivative, in both animals and humans infected with the tubercle bacilli. We carried out bioinformatics analyses of the BCG_0092 and designed a diagnostic test by using the predicted MHC class I epitopes. In addition, we performed a knockout of this gene by homologous recombination in the BCG vaccine strain to allow differentiation of vaccinated from infected individuals. For that, the flanking sequences of the target gene (BCG_0092were cloned into a suicide vector. Spontaneous double crossovers, which result in wild type revertants or knockouts were selected using SacB. BCG_0092 is present only in members of the Mycobacterium tuberculosis complex. Eight predicted MHC class I epitopes with potential for immunological diagnosis were defined, allowing the design of a specific diagnostic test. The strategy used to delete the (BCG_0092 gene from BCG was successful. The knockout genotype was confirmed by PCR and by Southern blot. The mutant BCG strain has the potential of inducing protection against tuberculosis without interfering with the diagnostic test based on the use of selected epitopes from BCG_0092.

  12. Metal Organic Frameworks: Explorations and Design Strategies for MOF Synthesis

    KAUST Repository

    AbdulHalim, Rasha

    2016-11-27

    Metal-Organic Frameworks (MOFs) represent an emerging new class of functional crystalline solid-state materials. In the early discovery of this now rapidly growing class of materials significant challenges were often encountered. However, MOFs today, with its vast structural modularity, reflected by the huge library of the available chemical building blocks, and exceptional controlled porosity, stand as the most promising candidate to address many of the overbearing societal challenges pertaining to energy and environmental sustainability. A variety of design strategies have been enumerated in the literature which rely on the use of predesigned building blocks paving the way towards potentially more predictable structures. The two major design strategies presented in this work are the molecular building block (MBB) and supermolecular building block (SBB) -based approaches for the rationale assembly of functional MOF materials with the desired structural features. In this context, we targeted two highly connected MOF platforms, namely rht-MOF and shp-MOF. These two MOF platforms are classified based on their topology, defined as the underlying connectivity of their respective net, as edge transitive binodal nets; shp being (4,12)-connected net and rht being (3,24)-connected net. These highly connected nets were deliberately targeted due to the limited number of possible nets for connecting their associated basic building units. Two highly porous materials were designed and successfully constructed; namely Y-shp-MOF-5 and rht-MOF-10. The Y-shp-MOF-5 features a phenomenal water stability with an exquisite behavior when exposed to water, positioning this microporous material as the best adsorbent for moisture control applications. The shp-MOF platform proved to be modular to ligand functionalization and thus imparting significant behavioral changes when hydrophilic and hydrophobic functionalized ligands were introduced on the resultant MOF. On the other hand, rht

  13. Designing a fuzzy expert system for selecting knowledge management strategy

    OpenAIRE

    Ameneh Khadivar; Shohreh Nasri Nasr Abadi; Elham Fallah

    2014-01-01

    knowledge management strategy is mentioned as one of the most important success factors for implementing knowledge management. The KM strategy selection is a complex decision that requires consideration of several factors. For evaluation and selection of an appropriate knowledge management strategy in organizations, many factors must be considered. The identified factors and their impact on knowledge management strategy are inherently ambiguous. In this study, an overview of theoretical found...

  14. The Strategy Blueprint: A Strategy Process Computer-Aided Design Tool

    OpenAIRE

    Aldea, Adina Ioana; Febriani, Tania Rizki; Daneva, Maya; Iacob, Maria Eugenia

    2017-01-01

    Strategy has always been a main concern of organizations because it dictates their direction, and therefore determines their success. Thus, organizations need to have adequate support to guide them through their strategy formulation process. The goal of this research is to develop a computer-based tool, known as ‘the Strategy Blueprint’, consisting of a combination of nine strategy techniques, which can help organizations define the most suitable strategy, based on the internal and external f...

  15. Teaching strategies to promote concept learning by design challenges

    Science.gov (United States)

    Van Breukelen, Dave; Van Meel, Adrianus; De Vries, Marc

    2017-07-01

    Background: This study is the second study of a design-based research, organised around four studies, that aims to improve student learning, teaching skills and teacher training concerning the design-based learning approach called Learning by Design (LBD).

  16. Computational Strategies for the Architectural Design of Bending Active Structures

    DEFF Research Database (Denmark)

    Tamke, Martin; Nicholas, Paul

    2013-01-01

    Active bending introduces a new level of integration into the design of architectural structures, and opens up new complexities for the architectural design process. In particular, the introduction of material variation reconfigures the design space. Through the precise specification...

  17. Preliminary conceptual design of the secondary sodium circuit-eliminated JSFR (Japan Sodium Fast Reactor) adopting a supercritical CO2 turbine system (2). Turbine system and plant size

    International Nuclear Information System (INIS)

    Kisohara, Naoyuki; Sakamoto, Yoshihiko; Kotake, Shoji

    2014-09-01

    Research and development of the supercritical CO 2 (S-CO 2 ) cycle turbine system is underway in various countries for further improvement of the safety and economy of sodium-cooled fast reactors. The Component Design and Balance-Of-Plant (CD and BOP) of the Generation IV International Nuclear Forum (Gen-IV) has addressed this study, and their analytical and experimental results have been discussed between the relevant countries. JAEA, who is a member of the CD and BOP, has performed a design study of an S-CO 2 gas turbine system applied to the Japan Sodium-cooled Fast Reactor (JSFR). In this study, the S-CO 2 cycle turbine system was directly connected to the primary sodium system of the JSFR to eliminate the secondary sodium circuit, aiming for further economical improvement. This is because there is no risk of sodium-water reaction in the S-CO 2 cycle turbine system of SFRs. This report describes the system configuration, heat/mass balance, and main components of the S-CO 2 turbine system, based on the JSFR specifications. The layout of components and piping in the reactor and turbine buildings were examined and the dimensions of the buildings were estimated. The study has revealed that the reactor and turbine buildings could be reduced by 7% and 40%, respectively, in comparison with those in the existing JSFR design with the secondary sodium circuit employing the steam turbine. The cycle thermal was also calculated as 41.9-42.3%, which is nearly the same as that of the JSFR with the water/steam system. (author)

  18. Identifying Instructional Strategies Used to Design Mobile Learning in a Corporate Setting

    Science.gov (United States)

    Jackson-Butler, Uletta

    2016-01-01

    The purpose of this qualitative embedded multiple case study was to describe what instructional strategies corporate instructional designers were using to design mobile learning and to understand from their experiences which instructional strategies they believed enhance learning. Participants were five instructional designers who were actively…

  19. Teaching Strategies to Promote Concept Learning by Design Challenges

    Science.gov (United States)

    Van Breukelen, Dave; Van Meel, Adrianus; De Vries, Marc

    2017-01-01

    Background: This study is the second study of a design-based research, organised around four studies, that aims to improve student learning, teaching skills and teacher training concerning the design-based learning approach called Learning by Design (LBD). Purpose: LBD uses the context of design challenges to learn, among other things, science.…

  20. Passive Design Strategies to Enhance Natural Ventilation in Buildings "Election of Passive Design Strategies to Achieve Natural Ventilation in Iraqi Urban Environment with Hot Arid Climate"

    Directory of Open Access Journals (Sweden)

    Ghada M.Ismael Abdul Razzaq Kamoona

    2016-06-01

    Full Text Available the natural ventilation in buildings is one of effective strategies for achieving energy efficiency in buildings by employing methods and ways of passive design, as well as its efficiency in providing high ranges of thermal comfort for occupants in buildings and raises their productivity. Because the concept of natural ventilation for many people confined to achieve through the windows and openings only, become necessary to provide this research to demonstrate the various passive design strategies for natural ventilation. Then, research problem: Insufficient knowledge about the importance and mechanism of the application of passive design strategies for natural ventilation in buildings. The research objective is: Analysis of passive design strategies to achieve natural ventilation in buildings, for the purpose of the proper selection of them to Iraqi urban environment. Accordingly, the research included two parts: First, the theoretical part, which dealt with the conceptual framework of natural ventilation and deriving the most important aspects in it, in order to adopted as a base for the practical part of the research. Second: the practical part, which analyzed examples of buildings projects that employed various design strategies for natural ventilation, according to the theoretical framework that has been drawn. The main conclusion is, Necessity to adopt various passive design strategies for natural ventilation in Iraqi urban environment with hot dry climate, as they have a significant impact in reducing the energy consumption for the purposes of ventilation and cooling, as well as for its efficiency in improving air quality in indoor environments of buildings.

  1. NATURAL VENTILATION: A PASSIVE DESIGN STRATEGY IN DESIGNING HOTEL LOBBIES – CASES FROM TROPICAL MALAYSIA

    Directory of Open Access Journals (Sweden)

    Abdul Malik Abdul Rahman

    2009-07-01

    Full Text Available When the Malaysian government increased electricity tariff by up to 12% in early 2006 and also another increase in early July 2008, most commercial buildings were affected by the move. The hardest hit would be the hotel industry as they are among the economic forefronts of the nation. Already burdened with the rigorous efforts of filling their rooms with guests, they now have to re-strategize to sustain business. Energy bills to pay for cooling have always been the biggest burden. Cooling the air is an intangible and a never-ending wasteful activity. Cold room for food is on for 24 hours for obvious reasons. To overcome this, one strategy was considered to be part and parcel of the overall building design so as to contribute to the reduction of the high dependency of energy consumption for cooling. The challenge here is to reduce electricity consumption without compromising the comfort of the guests and also reduce the overhead costs to give a more competitive edge in hotel room rates. Among other passive design elements this paper considers two natural ventilation occurrences and locations that can be relied upon for Malaysian hotel designs.

  2. The Strategy Blueprint : A Strategy Process Computer-Aided Design Tool

    NARCIS (Netherlands)

    Aldea, Adina Ioana; Febriani, Tania Rizki; Daneva, Maya; Iacob, Maria Eugenia

    2017-01-01

    Strategy has always been a main concern of organizations because it dictates their direction, and therefore determines their success. Thus, organizations need to have adequate support to guide them through their strategy formulation process. The goal of this research is to develop a computer-based

  3. Rabies elimination research: juxtaposing optimism, pragmatism and realism.

    Science.gov (United States)

    Cleaveland, Sarah; Hampson, Katie

    2017-12-20

    More than 100 years of research has now been conducted into the prevention, control and elimination of rabies with safe and highly efficacious vaccines developed for use in human and animal populations. Domestic dogs are a major reservoir for rabies, and although considerable advances have been made towards the elimination and control of canine rabies in many parts of the world, the disease continues to kill tens of thousands of people every year in Africa and Asia. Policy efforts are now being directed towards a global target of zero human deaths from dog-mediated rabies by 2030 and the global elimination of canine rabies. Here we demonstrate how research provides a cause for optimism as to the feasibility of these goals through strategies based around mass dog vaccination. We summarize some of the pragmatic insights generated from rabies epidemiology and dog ecology research that can improve the design of dog vaccination strategies in low- and middle-income countries and which should encourage implementation without further delay. We also highlight the need for realism in reaching the feasible, although technically more difficult and longer-term goal of global elimination of canine rabies. Finally, we discuss how research on rabies has broader relevance to the control and elimination of a suite of diseases of current concern to human and animal health, providing an exemplar of the value of a 'One Health' approach. © 2017 The Authors.

  4. Fluorescence signalling of the transition metal ions: Design strategy ...

    Indian Academy of Sciences (India)

    Unknown

    strategy based on the choice of the fluorophore component. N B SANKARAN, S ... skill for the development of fluorosensors of this kind. Further, the ... salts of the transition metal ions have been used for studying the influence of the metal ions.

  5. Designing supply chain strategy by using shared information

    DEFF Research Database (Denmark)

    Wong, Chee Yew

    2006-01-01

    of retailer demands, and allocated inventories along the supply chain to ensure high fill-rates to its customers (the toy retailers). However, this supply chain strategy was ineffective. It generated high mismatch of supply and demand, and consequently high costs on obsolete inventory, markdown and lost sales...

  6. Enhancing the Design and Analysis of Flipped Learning Strategies

    Science.gov (United States)

    Jenkins, Martin; Bokosmaty, Rena; Brown, Melanie; Browne, Chris; Gao, Qi; Hanson, Julie; Kupatadze, Ketevan

    2017-01-01

    There are numerous calls in the literature for research into the flipped learning approach to match the flood of popular media articles praising its impact on student learning and educational outcomes. This paper addresses those calls by proposing pedagogical strategies that promote active learning in "flipped" approaches and improved…

  7. Design and modeling of reservoir operation strategies for sediment management

    NARCIS (Netherlands)

    Sloff, C.J.; Omer, A.Y.A.; Heynert, K.V.; Mohamed, Y.A.

    2015-01-01

    Appropriate operation strategies that allow for sediment flushing and sluicing (sediment routing) can reduce rapid storage losses of (hydropower and water-supply) reservoirs. In this study we have shown, using field observations and computational models, that the efficiency of these operations

  8. A hybrid approach to designing inbound-resupply strategies

    NARCIS (Netherlands)

    Dullaert, Wout; Vernimmen, Bert; Raa, Birger; Witlox, Frank

    A new hybrid approach was developed to determine the optimal inbound-resupply strategy when suppliers ship goods to receivers. The optimal reorder level was calculated on the basis of a simulation of the distribution of demand and the lead time of the various sourcing alternatives. An evolutionary

  9. Designing a Knowledge Mobilization Strategy: Leading through Influence

    Science.gov (United States)

    Reid, Steven

    2015-01-01

    As district leaders consider professional learning opportunities for educators, mobilizing new thought and actions across an entire system is a vexing challenge. Classroom-based learning may unfortunately be viewed as juxtaposed to district-based learning. It becomes essential for district leaders to develop knowledge mobilization strategies which…

  10. Designing Instructional Strategies which Facilitate Learning for Mastery.

    Science.gov (United States)

    Anderson, Lorin W.; Jones, Beau Fly

    The "state of the craft" of instruction within the context of the mastery learning model is discussed. Little has been said in the past about specific instructional strategies that are applicable to particular instructional units or objectives, or to the daily classroom life of teachers. This paper is organized into six major sections. The first…

  11. Outcomes of a systematically designed strategy for the implementation of sex education in Dutch secondary schools

    NARCIS (Netherlands)

    Wiefferink, C.H.; Poelman, J.; Linthorst, M.; Vanwesenbeeck, I.; Wijngaarden, J.C.M. van; Paulussen, T.G.W.M.

    2005-01-01

    This study examines the effects of a systematically designed innovation strategy on teachers' implementation of a sex education curriculum and its related determinants. A quasi-experimental group design was used to assess the effectiveness of the innovation strategy. Teachers filled in

  12. Advanced Energy Efficiency Design Strategies In Retail Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Hayter, S.; Torcellini, P.

    2000-08-17

    This paper presents two US retail building projects that were designed and constructed using the energy design process. These buildings, the BigHorn Center in Silverthorne, Colorado, and the Zion National Park Visitor Center in Springdale, Utah, were both completed and occupied during the spring of 2000.

  13. Advanced Strategy Guideline. Air Distribution Basics and Duct Design

    Energy Technology Data Exchange (ETDEWEB)

    Arlan Burdick

    2011-12-01

    This report discusses considerations for designing an air distribution system for an energy efficient house that requires less air volume to condition the space. Considering the HVAC system early in the design process will allow adequate space for equipment and ductwork and can result in cost savings.

  14. Strategies for economic design of unbraced steel frames

    NARCIS (Netherlands)

    Steenhuis, C.M.; Weynand, K.; Gresnigt, A.M.

    1998-01-01

    In frame design for optimal economy, beam and column properties, as well as the properties of the joints, should be selected in such a way that economy can be achieved during fabrication. A method by which an impression of the possible layout of rigid joints can be obtained in a very early design

  15. Test Information Targeting Strategies for Adaptive Multistage Testing Designs.

    Science.gov (United States)

    Luecht, Richard M.; Burgin, William

    Adaptive multistage testlet (MST) designs appear to be gaining popularity for many large-scale computer-based testing programs. These adaptive MST designs use a modularized configuration of preconstructed testlets and embedded score-routing schemes to prepackage different forms of an adaptive test. The conditional information targeting (CIT)…

  16. Rapid E-learning Development Strategies and a Multimedia Project Design Model

    Science.gov (United States)

    Sözcü, Ömer Faruk; Ipek, Ismail

    2014-01-01

    The purpose of the study is to discuss e-learning design strategies which can be used for multimedia projects as a design model. Recent advances in instructional technologies have been found to be very important in the design of training courses by using rapid instructional design (ID) approaches. The approaches were developed to use in training…

  17. Overlapping research and design phases through participatory strategies

    DEFF Research Database (Denmark)

    Casciola, Lara Clare; Vasco, Maria Crucera; Grøndal, Esben

    2016-01-01

    This paper explores the implications, with regard to service design education, of a project in the second semester of the Service Systems Design Master’s program at Aalborg University in Copenhagen. The learning objective of this project is to develop student capabilities in the design and deploy......This paper explores the implications, with regard to service design education, of a project in the second semester of the Service Systems Design Master’s program at Aalborg University in Copenhagen. The learning objective of this project is to develop student capabilities in the design...... and deployment of service concepts within a systemic environment. Topics introduced as part of the program’s curriculum in this semester that contribute to engaging students in this type of thinking include both technical (production systems, IT systems) and social (user participation and social innovation......) aspects. As the case study is discussed, note will be taken of the influence of this educational approach in the design team’s choices throughout the project process. Through this exploration, a discussion can be held on the opportunities and challenges presented to students as they attempt to combine...

  18. Optimal Energy Control Strategy Design for a Hybrid Electric Vehicle

    Directory of Open Access Journals (Sweden)

    Yuan Zou

    2013-01-01

    Full Text Available A heavy-duty parallel hybrid electric truck is modeled, and its optimal energy control is studied in this paper. The fundamental architecture of the parallel hybrid electric truck is modeled feed-forwardly, together with necessary dynamic features of subsystem or components. Dynamic programming (DP technique is adopted to find the optimal control strategy including the gear-shifting sequence and the power split between the engine and the motor subject to a battery SOC-sustaining constraint. Improved control rules are extracted from the DP-based control solution, forming near-optimal control strategies. Simulation results demonstrate that a significant improvement on the fuel economy can be achieved in the heavy-duty vehicle cycle from the natural driving statistics.

  19. Designing a Minimal Intervention Strategy to Control Taenia solium.

    Science.gov (United States)

    Lightowlers, Marshall W; Donadeu, Meritxell

    2017-06-01

    Neurocysticercosis is an important cause of epilepsy in many developing countries. The disease is a zoonosis caused by the cestode parasite Taenia solium. Many potential intervention strategies are available, however none has been able to be implemented and sustained. Here we predict the impact of some T. solium interventions that could be applied to prevent transmission through pigs, the parasite's natural animal intermediate host. These include minimal intervention strategies that are predicted to be effective and likely to be feasible. Logical models are presented which reflect changes in the risk that age cohorts of animals have for their potential to transmit T. solium. Interventions that include a combined application of vaccination, plus chemotherapy in young animals, are the most effective. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  20. Strategy Guideline: Modeling Enclosure Design in Above-Grade Walls

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, J. [Building Science Corporation, Westford, MA (United States); Ueno, K. [Building Science Corporation, Westford, MA (United States); Musunuru, S. [Building Science Corporation, Westford, MA (United States)

    2016-02-24

    The Strategy Guideline describes how to model and interpret results of models for above grade walls. The Measure Guideline analyzes the failure thresholds and criteria for above grade walls. A library of above-grade walls with historically successful performance was used to calibrate WUFI (Warme Und Feuchte Instationar) software models. The information is generalized for application to a broad population of houses within the limits of existing experience.

  1. Advanced Strategy Guideline: Air Distribution Basics and Duct Design

    Energy Technology Data Exchange (ETDEWEB)

    Burdick, A.

    2011-12-01

    This report discusses considerations for designing an air distribution system for an energy efficient house that requires less air volume to condition the space. Considering the HVAC system early in the design process will allow adequate space for equipment and ductwork and can result in cost savings. Principles discussed that will maximize occupant comfort include delivery of the proper amount of conditioned air for appropriate temperature mixing and uniformity without drafts, minimization of system noise, the impacts of pressure loss, efficient return air duct design, and supply air outlet placement, as well as duct layout, materials, and sizing.

  2. Appropriate strategies for designing contemporary art museums with ...

    African Journals Online (AJOL)

    Journal of Fundamental and Applied Sciences ... of attracting more people in sociocultural spaces of the country ( case study: Sari, Mazandaran) ... So the assumption that qualitative factors such as (aesthetic style designed for the set, easy ...

  3. CODP Co operative design process - from urban strategy to detail

    OpenAIRE

    Thunberg, Pär; Philipson, Olof

    2012-01-01

    This project investigates the cooperation between architect and engineer. The context of the investigation is the design of buildings for a sustainable society. The goal of the project is to further the development of the sustainable built society by increasing the knowledge of the interdisciplinary cooperation between these two fields. The focus is a close cooperation already from the start of a project. By involving both fields in the early design stages it is thought that the knowledge and...

  4. Strategies for Establishing Service Oriented Design in Organizations

    OpenAIRE

    Aier, Stephan

    2012-01-01

    Service orientation is a broadly discussed design paradigm for information systems engineering. Only recently there have been several contributions to individual dimensions of service orientation like service definition, service modeling, service management or service governance. However, a combination of useful solutions for partial problems might not constitute an effective overall approach to service orientation. We argue that the establishment of service orientation is a wicked [design] p...

  5. Abc-frame complex-coefficient filter and controller based current harmonic elimination strategy for three-phase grid connected inverter

    DEFF Research Database (Denmark)

    Guo, Xiaoqiang; Guerrero, Josep M.

    2016-01-01

    Current quality is one of the most important issues for operating three-phase grid-connected inverter in distributed generation systems. In practice, the grid current quality is degraded in case of non-ideal utility voltage. A new control strategy is proposed for the three-phase gridconnected...... inverter. Different from the traditional method, our proposal utilizes the unique abc-frame complex-coefficient filter and controller to achieve the balanced, sinusoidal grid current. The main feature of the proposed method is simple and easy to implement without any frame transformation. The theoretical...

  6. European DEMO design strategy and consequences for materials

    Science.gov (United States)

    Federici, G.; Biel, W.; Gilbert, M. R.; Kemp, R.; Taylor, N.; Wenninger, R.

    2017-09-01

    Demonstrating the production of net electricity and operating with a closed fuel-cycle remain unarguably the crucial steps towards the exploitation of fusion power. These are the aims of a demonstration fusion reactor (DEMO) proposed to be built after ITER. This paper briefly describes the DEMO design options that are being considered in Europe for the current conceptual design studies as part of the Roadmap to Fusion Electricity Horizon 2020. These are not intended to represent fixed and exclusive design choices but rather ‘proxies’ of possible plant design options to be used to identify generic design/material issues that need to be resolved in future fusion reactor systems. The materials nuclear design requirements and the effects of radiation damage are briefly analysed with emphasis on a pulsed ‘low extrapolation’ system, which is being used for the initial design integration studies, based as far as possible on mature technologies and reliable regimes of operation (to be extrapolated from the ITER experience), and on the use of materials suitable for the expected level of neutron fluence. The main technical issues arising from the plasma and nuclear loads and the effects of radiation damage particularly on the structural and heat sink materials of the vessel and in-vessel components are critically discussed. The need to establish realistic target performance and a development schedule for near-term electricity production tends to favour more conservative technology choices. The readiness of the technical (physics and technology) assumptions that are being made is expected to be an important factor for the selection of the technical features of the device.

  7. USCIS Backlog Elimination

    Data.gov (United States)

    Department of Homeland Security — USCIS is streamlining the way immigration benefits are delivered. By working smarter and eliminating redundancies, USCIS is bringing a business model to government....

  8. Strategy Guideline. Modeling Enclosure Design in Above-Grade Walls

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, J. [Building Science Corporation, Westford, MA (United States); Ueno, K. [Building Science Corporation, Westford, MA (United States); Musunuru, S. [Building Science Corporation, Westford, MA (United States)

    2016-02-01

    The Strategy Guideline, written by the U.S. Department of Energy's research team Building Science Corporation, 1) describes how to model and interpret results of models for above-grade walls, and 2) analyzes the failure thresholds and criteria for above-grade walls. A library of above-grade walls with historically successful performance was used to calibrate WUFI (Wärme und Feuchte instationär) software models. The information is generalized for application to a broad population of houses within the limits of existing experience.

  9. Fuel lattice design using heuristics and new strategies

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz S, J. J.; Castillo M, J. A.; Torres V, M.; Perusquia del Cueto, R. [ININ, Carretera Mexico-Toluca s/n, Ocoyoacac 52750, Estado de Mexico (Mexico); Pelta, D. A. [ETS Ingenieria Informatica y Telecomunicaciones, Universidad de Granada, Daniel Saucedo Aranda s/n, 18071 Granada (Spain); Campos S, Y., E-mail: juanjose.ortiz@inin.gob.m [IPN, Escuela Superior de Fisica y Matematicas, Unidad Profesional Adolfo Lopez Mateos, Edif. 9, 07738 Mexico D. F. (Mexico)

    2010-10-15

    This work show some results of the fuel lattice design in BWRs when some allocation pin rod rules are not taking into account. Heuristics techniques like Path Re linking and Greedy to design fuel lattices were used. The scope of this work is to search about how do classical rules in design fuel lattices affect the heuristics techniques results and the fuel lattice quality. The fuel lattices quality is measured by Power Peaking Factor and Infinite Multiplication Factor at the beginning of the fuel lattice life. CASMO-4 code to calculate these parameters was used. The analyzed rules are the following: pin rods with lowest uranium enrichment are only allocated in the fuel lattice corner, and pin rods with gadolinium cannot allocated in the fuel lattice edge. Fuel lattices with and without gadolinium in the main diagonal were studied. Some fuel lattices were simulated in an equilibrium cycle fuel reload, using Simulate-3 to verify their performance. So, the effective multiplication factor and thermal limits can be verified. The obtained results show a good performance in some fuel lattices designed, even thought, the knowing rules were not implemented. A fuel lattice performance and fuel lattice design characteristics analysis was made. To the realized tests, a dell workstation was used, under Li nux platform. (Author)

  10. Fuel lattice design using heuristics and new strategies

    International Nuclear Information System (INIS)

    Ortiz S, J. J.; Castillo M, J. A.; Torres V, M.; Perusquia del Cueto, R.; Pelta, D. A.; Campos S, Y.

    2010-10-01

    This work show some results of the fuel lattice design in BWRs when some allocation pin rod rules are not taking into account. Heuristics techniques like Path Re linking and Greedy to design fuel lattices were used. The scope of this work is to search about how do classical rules in design fuel lattices affect the heuristics techniques results and the fuel lattice quality. The fuel lattices quality is measured by Power Peaking Factor and Infinite Multiplication Factor at the beginning of the fuel lattice life. CASMO-4 code to calculate these parameters was used. The analyzed rules are the following: pin rods with lowest uranium enrichment are only allocated in the fuel lattice corner, and pin rods with gadolinium cannot allocated in the fuel lattice edge. Fuel lattices with and without gadolinium in the main diagonal were studied. Some fuel lattices were simulated in an equilibrium cycle fuel reload, using Simulate-3 to verify their performance. So, the effective multiplication factor and thermal limits can be verified. The obtained results show a good performance in some fuel lattices designed, even thought, the knowing rules were not implemented. A fuel lattice performance and fuel lattice design characteristics analysis was made. To the realized tests, a dell workstation was used, under Li nux platform. (Author)

  11. Food fortification as a complementary strategy for the elimination of micronutrient deficiencies: case studies of large scale food fortification in two Indian States.

    Science.gov (United States)

    Bhagwat, Sadhana; Gulati, Deepti; Sachdeva, Ruchika; Sankar, Rajan

    2014-01-01

    The burden of micronutrient malnutrition is very high in India. Food fortification is one of the most cost-effective and sustainable strategies to deliver micronutrients to large population groups. Global Alliance for Improved Nutrition (GAIN) is supporting large-scale, voluntary, staple food fortification in Rajasthan and Madhya Pradesh because of the high burden of malnutrition, availability of industries capable of and willing to introduce fortified staples, consumption patterns of target foods and a conducive and enabling environment. High extraction wheat flour from roller flour mills, edible soybean oil and milk from dairy cooperatives were chosen as the vehicles for fortification. Micronutrients and levels of fortification were selected based on vehicle characteristics and consumption levels. Industry recruitment was done after a careful assessment of capability and willingness. Production units were equipped with necessary equipment for fortification. Staffs were trained in fortification and quality control. Social marketing and communication activities were carried out as per the strategy developed. A state food fortification alliance was formed in Madhya Pradesh with all relevant stakeholders. Over 260,000 MT of edible oil, 300,000 MT of wheat flour and 500,000 MT of milk are being fortified annually and marketed. Rajasthan is also distributing 840,000 MT of fortified wheat flour annually through its Public Distribution System and 1.1 million fortified Mid-day meals daily through the centralised kitchens. Concurrent monitoring in Rajasthan and Madhya has demonstrated high compliance with all quality standards in fortified foods.

  12. Investigation of Architectural Strategies in Relation to Daylight and Integrated Design

    DEFF Research Database (Denmark)

    Jørgensen, Michael; Iversen, Anne; Bjerregaard Jensen, Lotte

    2012-01-01

    his paper investigates the use of daylight in three architecturally successful buildings. The aim is to discuss the challenges and opportunities of architectural daylight strategies in relation to integrated design. All these buildings were designed with the focus on a strategy of using daylight...... to create well-lit, exciting spaces and spatial sequences. The original ideas, thoughts, and decisions behind the designs and daylight strategy are compared with answers in questionnaires from test subjects who have experienced the space and lighting conditions created. The results indicate...... that the architectural daylight strategies formulated by the architects and engineers at the beginning of the design process are actually experienced by the “users” in the existing buildings. The architectural daylight strategy was different in each of the three libraries, and analysis of the results shows that daylight...

  13. Improving local health workers' knowledge of malaria in the elimination phase-determinants and strategies: a cross-sectional study in rural China.

    Science.gov (United States)

    Wang, Ruoxi; Tang, Shangfeng; Yang, Jun; Shao, Tian; Shao, Piaopiao; Liu, Chunyan; Feng, Da; Fu, Hang; Chen, Xiaoyu; Hu, Tao; Feng, Zhanchun

    2017-05-19

    The current stage of malaria elimination in China requires experienced local health workers with sufficient knowledge of malaria who help to keep the public health system vigilant about a possible resurgence. However, the influencing factors of local health workers' knowledge level are not fully comprehended. This study aims to explore the factors with heavy impact on local health worker's knowledge of malaria and propose corresponding suggestions. Underpinned by stratified sampling method, a cross-sectional survey was carried out between November 2014 and April 2016. Chi square test was performed to identify the factors with potential influence on health workers' knowledge level of malaria. Bivariate logistic regression was employed to explore the relationship between the predictors and local health workers' knowledge level of malaria. Layered Chi square test was used to calculate the homogeneity of the interaction between training approaches and the percentage of participants with high-level knowledge. The endemic type of county and type of organization played the most significant role in influencing local health workers' knowledge level regarding malaria in the sample population. The participants from Type 1 and Type 2 counties were 4.3 times (4.336 and 4.328, respectively) more likely to have high-level knowledge of malaria than those who work in Type 3 counties. The probability of having high-level knowledge amongst the participants from county-level facilities (county hospitals and CDCs) were more than 2.2 times higher than those who work in villages. Other socio-demographic factors, such as education and work experience, also affected one's knowledge regarding malaria. Amongst the six most-used training approaches, electronic material (OR = 2.356, 95% CI 1.112-4.989), thematic series (OR = 1.784, 95% CI 0.907-3.508) and supervision (OR = 2.788, 95% CI 1.018-7.632) were proven with significant positive impact on local health workers' knowledge of

  14. Small Column Ion Exchange Design and Safety Strategy

    International Nuclear Information System (INIS)

    Huff, T.; Rios-Armstrong, M.; Edwards, R.; Herman, D.

    2011-01-01

    Small Column Ion Exchange (SCIX) is a transformational technology originally developed by the Department of Energy (DOE) Environmental Management (EM-30) office and is now being deployed at the Savannah River Site (SRS) to significantly increase overall salt processing capacity and accelerate the Liquid Waste System life-cycle. The process combines strontium and actinide removal using Monosodium Titanate (MST), Rotary Microfiltration, and cesium removal using Crystalline Silicotitanate (CST, specifically UOP IONSIV(reg s ign)IE-911 ion exchanger) to create a low level waste stream to be disposed in grout and a high level waste stream to be vitrified. The process also includes preparation of the streams for disposal, e.g., grinding of the loaded CST material. These waste processing components are technically mature and flowsheet integration studies are being performed including glass formulations studies, application specific thermal modeling, and mixing studies. The deployment program includes design and fabrication of the Rotary Microfilter (RMF) assembly, ion-exchange columns (IXCs), and grinder module, utilizing an integrated system safety design approach. The design concept is to install the process inside an existing waste tank, Tank 41H. The process consists of a feed pump with a set of four RMFs, two IXCs, a media grinder, three Submersible Mixer Pumps (SMPs), and all supporting infrastructure including media receipt and preparation facilities. The design addresses MST mixing to achieve the required strontium and actinide removal and to prevent future retrieval problems. CST achieves very high cesium loadings (up to 1,100 curies per gallon (Ci/gal) bed volume). The design addresses the hazards associated with this material including heat management (in column and in-tank), as detailed in the thermal modeling. The CST must be size reduced for compatibility with downstream processes. The design addresses material transport into and out of the grinder and

  15. Design strategies for self-assembly of discrete targets

    International Nuclear Information System (INIS)

    Madge, Jim; Miller, Mark A.

    2015-01-01

    Both biological and artificial self-assembly processes can take place by a range of different schemes, from the successive addition of identical building blocks to hierarchical sequences of intermediates, all the way to the fully addressable limit in which each component is unique. In this paper, we introduce an idealized model of cubic particles with patterned faces that allows self-assembly strategies to be compared and tested. We consider a simple octameric target, starting with the minimal requirements for successful self-assembly and comparing the benefits and limitations of more sophisticated hierarchical and addressable schemes. Simulations are performed using a hybrid dynamical Monte Carlo protocol that allows self-assembling clusters to rearrange internally while still providing Stokes-Einstein-like diffusion of aggregates of different sizes. Our simulations explicitly capture the thermodynamic, dynamic, and steric challenges typically faced by self-assembly processes, including competition between multiple partially completed structures. Self-assembly pathways are extracted from the simulation trajectories by a fully extendable scheme for identifying structural fragments, which are then assembled into history diagrams for successfully completed target structures. For the simple target, a one-component assembly scheme is most efficient and robust overall, but hierarchical and addressable strategies can have an advantage under some conditions if high yield is a priority

  16. From value chain to value constellation: designing interactive strategy.

    Science.gov (United States)

    Normann, R; Ramírez, R

    1993-01-01

    In today's fast-changing competitive environment, strategy is no longer a matter of positioning a fixed set of activities along that old industrial model, the value chain. Successful companies increasingly do not just add value, they reinvent it. The key strategic task is to reconfigure roles and relationships among a constellation of actors--suppliers, partners, customers--in order to mobilize the creation of value by new combinations of players. What is so different about this new logic of value? It breaks down the distinction between products and services and combines them into activity-based "offerings" from which customers can create value for themselves. But as potential offerings grow more complex, so do the relationships necessary to create them. As a result, a company's strategic task becomes the ongoing reconfiguration and integration of its competencies and customers. The authors provide three illustrations of these new rules of strategy. IKEA has blossomed into the world's largest retailer of home furnishings by redefining the relationships and organizational practices of the furniture business. Danish pharmacies and their national association have used the opportunity of health care reform to reconfigure their relationships with customers, doctors, hospitals, drug manufacturers, and with Danish and international health organizations to enlarge their role, competencies, and profits. French public-service concessionaires have mastered the art of conducting a creative dialogue between their customers--local governments in France and around the world--and a perpetually expanding set of infrastructure competencies.

  17. Active Learning Methods and Technology: Strategies for Design Education

    Science.gov (United States)

    Coorey, Jillian

    2016-01-01

    The demands in higher education are on the rise. Charged with teaching more content, increased class sizes and engaging students, educators face numerous challenges. In design education, educators are often torn between the teaching of technology and the teaching of theory. Learning the formal concepts of hierarchy, contrast and space provide the…

  18. Four Papers on Contemporary Software Design Strategies for Statistical Methodologists

    OpenAIRE

    Carey, Vincent; Cook, Dianne

    2014-01-01

    Software design impacts much of statistical analysis and, as technology changes, dramatically so in recent years, it is exciting to learn how statistical software is adapting and changing. This leads to the collection of papers published here, written by John Chambers, Duncan Temple Lang, Michael Lawrence, Martin Morgan, Yihui Xie, Heike Hofmann and Xiaoyue Cheng.

  19. Using Pull Strategy for Curricula Design on Entrepreneurship Education

    NARCIS (Netherlands)

    Hammer, M.H.M.; Van der Meer, J.D.

    2013-01-01

    Universities are deeply involved in stimulating their students in entrepreneurship where they focus on designing programs based on existing knowledge form pedagogics and didactical concepts. Although the Total Entrepreneurial Activity is increasing, the results are not satisfying in all cases. The

  20. Designing from Heritage : Strategies for Conservation and Conversion

    NARCIS (Netherlands)

    Kuipers, M.C.; de Jonge, W.

    2017-01-01

    This book – the third in the Rondeltappe series – reflects the philosophy and didactic approach of Heritage and Architecture (H&A) section of the Faculty of Architecture and the Built Environment (Delft University of Technology). H&A has three chairs: Design, Cultural Value and Technology.

  1. Procurement strategy formation : (re-)designing rail infrastructure project alliances

    NARCIS (Netherlands)

    Plantinga, Henrico; Dorée, André

    2016-01-01

    Purpose – The purpose of this paper is to provide insights into the reasoning behind the development of new procurement approaches by public sector clients. Design/methodology/approach – A case study approach focuses on a procurement development process by a public sector client. It investigates the

  2. Designing and Deploying Programming Courses: Strategies, Tools, Difficulties and Pedagogy

    Science.gov (United States)

    Xinogalos, Stelios

    2016-01-01

    Designing and deploying programming courses is undoubtedly a challenging task. In this paper, an attempt to analyze important aspects of a sequence of two courses on imperative-procedural and object-oriented programming in a non-CS majors Department is made. This analysis is based on a questionnaire filled in by fifty students in a voluntary…

  3. Design strategies for integration of green roofs in sustainable housing

    Directory of Open Access Journals (Sweden)

    Avi Friedman

    2015-12-01

    Full Text Available Green roofs are the integration of plant material and its supporting structures in buildings. Such an approach provides a habitat for local flora and fauna, helps manage storm water, reduces heat demand in winter and the cooling load in the summer, enhances the aesthetic values of dwellings, provides the occupants with comfort and amenities and strengthens environmental responsibility. Because roofs represent approximately 40 percent to 50 percent of the surfaces in urban areas, green roofs have an important role in drainage and as a result water management as well. In fact, when a green roof is installed on 50 percent or more of the roof’s surface, it guarantees 2 points and can contribute 7 additional points toward LEED certification - almost 20 percent of the required rating. This paper classifies green roofs and offers strategies for their integration in residential buildings and examines their benefits, construction principles and applications.

  4. A strategy for quantum algorithm design assisted by machine learning

    International Nuclear Information System (INIS)

    Bang, Jeongho; Lee, Jinhyoung; Ryu, Junghee; Yoo, Seokwon; Pawłowski, Marcin

    2014-01-01

    We propose a method for quantum algorithm design assisted by machine learning. The method uses a quantum–classical hybrid simulator, where a ‘quantum student’ is being taught by a ‘classical teacher’. In other words, in our method, the learning system is supposed to evolve into a quantum algorithm for a given problem, assisted by a classical main-feedback system. Our method is applicable for designing quantum oracle-based algorithms. We chose, as a case study, an oracle decision problem, called a Deutsch–Jozsa problem. We showed by using Monte Carlo simulations that our simulator can faithfully learn a quantum algorithm for solving the problem for a given oracle. Remarkably, the learning time is proportional to the square root of the total number of parameters, rather than showing the exponential dependence found in the classical machine learning-based method. (paper)

  5. A strategy for quantum algorithm design assisted by machine learning

    Science.gov (United States)

    Bang, Jeongho; Ryu, Junghee; Yoo, Seokwon; Pawłowski, Marcin; Lee, Jinhyoung

    2014-07-01

    We propose a method for quantum algorithm design assisted by machine learning. The method uses a quantum-classical hybrid simulator, where a ‘quantum student’ is being taught by a ‘classical teacher’. In other words, in our method, the learning system is supposed to evolve into a quantum algorithm for a given problem, assisted by a classical main-feedback system. Our method is applicable for designing quantum oracle-based algorithms. We chose, as a case study, an oracle decision problem, called a Deutsch-Jozsa problem. We showed by using Monte Carlo simulations that our simulator can faithfully learn a quantum algorithm for solving the problem for a given oracle. Remarkably, the learning time is proportional to the square root of the total number of parameters, rather than showing the exponential dependence found in the classical machine learning-based method.

  6. An automated supernova search and the design strategy

    International Nuclear Information System (INIS)

    Colgate, S.A.

    1987-01-01

    The design considerations for an automated supernova search are reviewed. If supernova are to be found a week after explosion well before light maximum of both Types I and II, and if a rate of finding of 52 per year is justified, then one needs to keep roughly 5000 galaxies under surveillance out of a full set of 15,000 galaxies at ≅50 Mpc distance. For detection at 1% of Type I maximum light requires a 30-inch telescope, 10 photoelectrons per pixel threshold, a 128 x 128 pixel photodetector operating with a 3-second integration time, and 2 seconds to slew and settle ≅1 0 . A system designed to perform this function in real-time is described. 7 refs

  7. Key elements for designing a strategy to generate social and ...

    African Journals Online (AJOL)

    For example, with the growth of social media (O'Brien, 2011), the number ... three tourism journals for the past 20 years. This goes .... The festival. Vision, mission, motivation of the festival .... designer of Boom, the festival is “a space for an experience” to “gather ... as expected: e.g. an app to support car-sharing. In spite of ...

  8. A normative probabilistic design of a fair governmental decision strategy

    Czech Academy of Sciences Publication Activity Database

    Kárný, Miroslav; Kracík, Jan

    2004-01-01

    Roč. 12, 2-3 (2004), s. 1-15 ISSN 1057-9214 R&D Projects: GA AV ČR IBS1075351; GA ČR GA102/03/0049 Grant - others:ESF(FR) TED Institutional research plan: CEZ:AV0Z1075907 Keywords : fully probabilistic design * E-democracy * multiple participant decision making Subject RIV: BB - Applied Statistics, Operational Research http://library.utia.cas.cz/separaty/historie/karny-0106249.pdf

  9. Using Learning Analytics to Characterize Student Experimentation Strategies in Engineering Design

    Science.gov (United States)

    Vieira, Camilo; Goldstein, Molly Hathaway; Purzer, Senay; Magana, Alejandra J.

    2016-01-01

    Engineering design is a complex process both for students to participate in and for instructors to assess. Informed designers use the key strategy of conducting experiments as they test ideas to inform next steps. Conversely, beginning designers experiment less, often with confounding variables. These behaviours are not easy to assess in…

  10. Nature-inspired design strategies in sustainable product development : A case study of student projects

    NARCIS (Netherlands)

    De Pauw, I.C.; Karana, E.; Kandachar, P.V.

    2012-01-01

    In design practice, Nature-Inspired Design Strategies (NIDS) can be applied when developing sustainable products. However, knowledge on how this actually helps designers is lacking. This study explores the effects of applying Cradle to Cradle and Biomimicry in student projects, as compared to using

  11. Demonstrating Empathy: A Phenomenological Study of Instructional Designers Making Instructional Strategy Decisions for Adult Learners

    Science.gov (United States)

    Vann, Linda S.

    2017-01-01

    Instructional designers are tasked with making instructional strategy decisions to facilitate achievement of learning outcomes as part of their professional responsibilities. While the instructional design process includes learner analysis, that analysis alone does not embody opportunities to assist instructional designers with demonstrations of…

  12. SSV Launch Monitoring Strategies: HGDS Design Implementation Through System Maturity

    Science.gov (United States)

    Shoemaker, Marc D.; Crimi, Thomas

    2010-01-01

    With over 500,000 gallons of liquid hydrogen and liquid oxygen, it is of vital importance to monitor the space shuttle vehicle (SSV) from external tank (ET) load through launch. The Hazardous Gas Detection System (HGDS) was installed as the primary system responsible for monitoring fuel leaks within the orbiter and ET. The HGDS was designed to obtain the lowest possible detection limits with the best resolution while monitoring the SSV for any hydrogen, helium, oxygen, or argon as the main requirement. The HGDS is a redundant mass spectrometer used for real-time monitoring during Power Reactant Storage and Distribution (PRSD) load and ET load through launch or scrub. This system also performs SSV processing leak checks of the Tail Service Mast (TSM) umbilical quick disconnects (QD's), Ground Umbilical Carrier Plate (GUCP) QD's and supports auxiliary power unit (APU) system tests. From design to initial implementation and operations, the HGDS has evolved into a mature and reliable launch support system. This paper will discuss the operational challenges and lessons learned from facing design deficiencies, validation and maintenance efforts, life cycle issues, and evolving requirements

  13. Design Strategy of Information Construction Based on User Participation

    Directory of Open Access Journals (Sweden)

    Gao Jundong

    2017-01-01

    Full Text Available In the design of the Internet products, the information construction is one of the important factors to determine that whether a product is friendly. It is a challenge for every information architect to discover new innovations on the basis of established user habits. In practice, we often found that the development of many new functions did not meet the needs of users and many functions would be improved by users themselves, the fact of which shows the strong desire of users to participate in the development of products. Therefore, this article proposes an information architecture method based on the “users’ partially involved”, that is, when the main framework of a product is determined and the detailed architecture of part of the functions is proposed by users themselves, builders will help users to dig and organize their requirements and eventually integrate them into the design of architecture. In order to verify the effectiveness of this method, the article takes the virtual products for social service based on "surrounding geographic information" as an example. A comparison experiment was conducted on the effectiveness of the design of user-participant information architecture, and the experimental results were evaluated.

  14. BARRIER DESIGN STRATEGIES TO CONTROL NOISE INGRESS INTO DOMESTIC BUILDINGS

    Directory of Open Access Journals (Sweden)

    Christina E. Mediastika

    2003-01-01

    Full Text Available Noise source for buildings adjacent to streets is traffic-generated predominantly. Where people are mostly spend their time indoors, it is important for buildings to have screening or blocking to control noise intrusion into living spaces. But this blocking should also permit airflow. This is important for middle to low-cost domestic buildings, which do not employ conditioned ventilation. A common feature of Indonesian buildings, fence, is studied to perform noise barrier. The fence -a barrier to be- should obey three factors: position, dimension, and material. All these three factors were studied to seek compromised design for acoustic performance and natural ventilation purpose. Domestic building situated in the urban area of Yogyakarta was studying to see the most possible design of the barrier to be. There are two calculation methods employed to investigate the proposed design. The study shows that it is possible to gain minimum of 10 dB noise reduction by placing windows within the shadow effect of approximately 1.5 height fence-barrier.

  15. Human Pathogens on Plants: Designing a Multidisciplinary Strategy for Research.

    Science.gov (United States)

    Fletcher, Jacqueline; Leach, Jan E; Eversole, Kellye; Tauxe, Robert

    2014-10-15

    Recent efforts to address concerns about microbial contamination of food plants and resulting foodborne illness have prompted new collaboration and interactions between the scientific communities of plant pathology and food safety. This article provides perspectives from scientists of both disciplines and presents selected research results and concepts that highlight existing and possible future synergisms for audiences of both disciplines. Plant pathology is a complex discipline that encompasses studies of the dissemination, colonization, and infection of plants by microbes such as bacteria, viruses, fungi, and oomycetes. Plant pathologists study plant diseases as well as host plant defense responses and disease management strategies with the goal of minimizing disease occurrences and impacts. Repeated outbreaks of human illness attributed to the contamination of fresh produce, nuts and seeds, and other plant-derived foods by human enteric pathogens such as Shiga toxin-producing Escherichia coli and Salmonella spp. have led some plant pathologists to broaden the application of their science in the past two decades, to address problems of human pathogens on plants (HPOPs). Food microbiology, which began with the study of microbes that spoil foods and those that are critical to produce food, now also focuses study on how foods become contaminated with pathogens and how this can be controlled or prevented. Thus, at the same time, public health researchers and food microbiologists have become more concerned about plant-microbe interactions before and after harvest. New collaborations are forming between members of the plant pathology and food safety communities, leading to enhanced research capacity and greater understanding of the issues for which research is needed. The two communities use somewhat different vocabularies and conceptual models. For example, traditional plant pathology concepts such as the disease triangle and the disease cycle can help to define

  16. Human pathogens on plants: designing a multidisciplinary strategy for research.

    Science.gov (United States)

    Fletcher, Jacqueline; Leach, Jan E; Eversole, Kellye; Tauxe, Robert

    2013-04-01

    Recent efforts to address concerns about microbial contamination of food plants and resulting foodborne illness have prompted new collaboration and interactions between the scientific communities of plant pathology and food safety. This article provides perspectives from scientists of both disciplines and presents selected research results and concepts that highlight existing and possible future synergisms for audiences of both disciplines. Plant pathology is a complex discipline that encompasses studies of the dissemination, colonization, and infection of plants by microbes such as bacteria, viruses, fungi, and oomycetes. Plant pathologists study plant diseases as well as host plant defense responses and disease management strategies with the goal of minimizing disease occurrences and impacts. Repeated outbreaks of human illness attributed to the contamination of fresh produce, nuts and seeds, and other plant-derived foods by human enteric pathogens such as Shiga toxin-producing Escherichia coli and Salmonella spp. have led some plant pathologists to broaden the application of their science in the past two decades, to address problems of human pathogens on plants (HPOPs). Food microbiology, which began with the study of microbes that spoil foods and those that are critical to produce food, now also focuses study on how foods become contaminated with pathogens and how this can be controlled or prevented. Thus, at the same time, public health researchers and food microbiologists have become more concerned about plant-microbe interactions before and after harvest. New collaborations are forming between members of the plant pathology and food safety communities, leading to enhanced research capacity and greater understanding of the issues for which research is needed. The two communities use somewhat different vocabularies and conceptual models. For example, traditional plant pathology concepts such as the disease triangle and the disease cycle can help to define

  17. Design Strategy of Information Construction Based on User Participation

    OpenAIRE

    Gao Jundong

    2017-01-01

    In the design of the Internet products, the information construction is one of the important factors to determine that whether a product is friendly. It is a challenge for every information architect to discover new innovations on the basis of established user habits. In practice, we often found that the development of many new functions did not meet the needs of users and many functions would be improved by users themselves, the fact of which shows the strong desire of users to participate i...

  18. The ability of environmental healthcare design strategies To impact event related anxiety in paediatric patients: A comprehensive systematic review.

    Science.gov (United States)

    Norton-Westwood, Deborah; Pearson, Alan; Robertson-Malt, Suzanne

    Background Children's' hospitals are by definition hospitals specialized in all aspects of children's care, but are they and if so, how is that achieved? Are healthcare facilities more than a 'space' in which to ask medical questions, seek answers and obtain treatment? Some suggest that the very design of a space can positively or negatively impact healing, hence the term referred to by those in the architectural community as 'healing spaces'. To date empirical studies to provide evidence to this effect, although growing in number, are still few. What is known is that hospitals, doctor's offices and dental offices alike unintentionally create an atmosphere, particularly for children, that add to an already heightened level of anxiety and fear. Designing a children's hospital, unlike a generalist facility, presents a unique and significant challenge. Those involved in designing such hospitals are faced with the opportunity and responsibility to care for and respond to the needs of children across the age spectrum; infants to toddlers, school aged children to adolescents. As healthcare professionals and architects, it is our responsibility to create healthcare facilities that are of purposeful design; anticipating and alleviating children's anxiety and fear wherever possible.Objectives The objective of this systematic review is to evaluate the effects of environmental design strategies in healthcare institutions such as hospitals and dental offices on event-related anxiety in the paediatric population.Inclusion Criteria This comprehensive systematic review involved children from the age of 1 to 18 years of age admitted to a healthcare facility with the primary outcomes of interest being four key design strategies: positive distraction; elimination of environmental stressors; access to social support and choice (control); and connection to nature.Search Strategy Using the Joanna Briggs defined three step search strategy, both published and unpublished studies were

  19. Conceptual Design of Operation Strategies for Hybrid Electric Aircraft

    Directory of Open Access Journals (Sweden)

    Julian Hoelzen

    2018-01-01

    Full Text Available Ambitious targets to reduce emissions caused by aviation in the light of an expected ongoing rise of the air transport demand in the future drive the research of propulsion systems with lower CO2 emissions. Regional hybrid electric aircraft (HEA powered by conventional gas turbines and battery powered electric motors are investigated to test hybrid propulsion operation strategies. Especially the role of the battery within environmentally friendly concepts with significantly reduced carbon footprint is analyzed. Thus, a new simulation approach for HEA is introduced. The main findings underline the importance of choosing the right power-to-energy-ratio of a battery according to the flight mission. The gravimetric energy and power density of the electric storages determine the technologically feasibility of hybrid concepts. Cost competitive HEA configurations are found, but do not promise the targeted CO2 emission savings, when the well-to-wheel system is regarded with its actual costs. Sensitivity studies are used to determine external levers that favor the profitability of HEA.

  20. Eliminating Rabies in Estonia

    Science.gov (United States)

    Cliquet, Florence; Robardet, Emmanuelle; Must, Kylli; Laine, Marjana; Peik, Katrin; Picard-Meyer, Evelyne; Guiot, Anne-Laure; Niin, Enel

    2012-01-01

    The compulsory vaccination of pets, the recommended vaccination of farm animals in grazing areas and the extermination of stray animals did not succeed in eliminating rabies in Estonia because the virus was maintained in two main wildlife reservoirs, foxes and raccoon dogs. These two species became a priority target therefore in order to control rabies. Supported by the European Community, successive oral vaccination (OV) campaigns were conducted twice a year using Rabigen® SAG2 baits, beginning in autumn 2005 in North Estonia. They were then extended to the whole territory from spring 2006. Following the vaccination campaigns, the incidence of rabies cases dramatically decreased, with 266 cases in 2005, 114 in 2006, four in 2007 and three in 2008. Since March 2008, no rabies cases have been detected in Estonia other than three cases reported in summer 2009 and one case in January 2011, all in areas close to the South-Eastern border with Russia. The bait uptake was satisfactory, with tetracycline positivity rates ranging from 85% to 93% in foxes and from 82% to 88% in raccoon dogs. Immunisation rates evaluated by ELISA ranged from 34% to 55% in foxes and from 38% to 55% in raccoon dogs. The rabies situation in Estonia was compared to that of the other two Baltic States, Latvia and Lithuania. Despite regular OV campaigns conducted throughout their territory since 2006, and an improvement in the epidemiological situation, rabies has still not been eradicated in these countries. An analysis of the number of baits distributed and the funding allocated by the European Commission showed that the strategy for rabies control is more cost-effective in Estonia than in Latvia and Lithuania. PMID:22393461

  1. Design and Engineering Strategies for Synthetic Antimicrobial Peptides

    Science.gov (United States)

    Tossi, Alessandro

    Thousands of antimicrobial peptides (AMPs) of prokaryotic, fungal, plant, or animal origin have been identified, and their potential as lead compounds for the design of novel therapeutic agents in the treatment of infection, for stimulating the immune system, or in countering septic shock has been widely recognized. Added to this is their possible use in prophylaxis of infectious diseases for animal or plant protection, for disinfection of surgical instruments or industrial surfaces, and for food preservation among other commercially important applications. Since the early eighties, AMPs have been subject to a vast number of studies aimed at understanding what determines their potency and spectrum of activities against bacterial or fungal pathogens, and at maximizing these while limiting cytotoxic activities toward host cells. Much research has also been directed toward understanding specific mechanisms of action underlying the antimicrobial activity and selectivity, to be able to redesign the peptides for optimal performance. A central theme in the mode of action of many AMPs is their dynamic interaction with biological membranes, which involves various properties of these peptides such as, among others, surface hydrophobicity and polarity, charge, structure, and induced conformational variations. These features are often intimately interconnected so that engineering peptides to independently adjust any one property in particular is not an easy task. However, solid-phase peptide synthesis allows the use of a large repertoire of nonproteinogenic amino acids that can be used in the rational design of peptides to finely tune structural and physicochemical properties and precisely probe structure-function relationships.

  2. Reflecting Societal Values in Designing Flood Risk Management Strategies

    Directory of Open Access Journals (Sweden)

    Adamson Mark

    2016-01-01

    Full Text Available In 2006, the Office of Public Works (OPW began the National Catchment-based Flood Risk Assessment and Management (CFRAM Programme through a series of pilot studies. A Multi-Criteria Analysis (MCA Framework was developed through the pilot studies that integrated a number of objectives related to a wide range of potential impacts and benefits into the core of process of appraising and selecting suitable flood risk management measures for a given area or location, and then for prioritising national investments for different schemes and projects. This MCA Framework, that provides a systematic process of developing a non-monetised but numerical indicator of benefit and impact, has since been implemented nationally in the preparation of the Flood Risk Management Plans (FRMPs. A key feature of the MCA is that it should represent societal values. To this end, nationally representative quantitative research was undertaken to determine global weights that reflect the perceived importance of each of the objectives for reducing economic, social and environmental / cultural risks in flood management strategies. Saaty’s Analytical Hierarchy Process (AHP, in conjunction with a pair-wise comparison of criteria relating to these risks, was utilised to determine weights. In excess of 1,000 structured interviews were completed where the relative importance of these objectives were assessed using a seven-point scale. The weighting given to each of the 13 specific objectives identified broadly followed expectations, with risk to people followed by risk to homes and properties being respectively the first and second most important, although some were given greater or less weighting than expected. The national application of the MCA Framework, using the weighted objectives based on this process, through the CFRAM Programme has generally lead to the identification of appropriate and, based on local consultation, acceptable options for each community.

  3. Peptide/protein-polymer conjugates: synthetic strategies and design concepts.

    Science.gov (United States)

    Gauthier, Marc A; Klok, Harm-Anton

    2008-06-21

    This feature article provides a compilation of tools available for preparing well-defined peptide/protein-polymer conjugates, which are defined as hybrid constructs combining (i) a defined number of peptide/protein segments with uniform chain lengths and defined monomer sequences (primary structure) with (ii) a defined number of synthetic polymer chains. The first section describes methods for post-translational, or direct, introduction of chemoselective handles onto natural or synthetic peptides/proteins. Addressed topics include the residue- and/or site-specific modification of peptides/proteins at Arg, Asp, Cys, Gln, Glu, Gly, His, Lys, Met, Phe, Ser, Thr, Trp, Tyr and Val residues and methods for producing peptides/proteins containing non-canonical amino acids by peptide synthesis and protein engineering. In the second section, methods for introducing chemoselective groups onto the side-chain or chain-end of synthetic polymers produced by radical, anionic, cationic, metathesis and ring-opening polymerization are described. The final section discusses convergent and divergent strategies for covalently assembling polymers and peptides/proteins. An overview of the use of chemoselective reactions such as Heck, Sonogashira and Suzuki coupling, Diels-Alder cycloaddition, Click chemistry, Staudinger ligation, Michael's addition, reductive alkylation and oxime/hydrazone chemistry for the convergent synthesis of peptide/protein-polymer conjugates is given. Divergent approaches for preparing peptide/protein-polymer conjugates which are discussed include peptide synthesis from synthetic polymer supports, polymerization from peptide/protein macroinitiators or chain transfer agents and the polymerization of peptide side-chain monomers.

  4. Metal-Organic Frameworks: Building Block Design Strategies for the Synthesis of MOFs.

    KAUST Repository

    Luebke, Ryan

    2014-01-01

    A significant and ongoing challenge in materials chemistry and furthermore solid state chemistry is to design materials with the desired properties and characteristics. The field of Metal-Organic Frameworks (MOFs) offers several strategies

  5. Trusted Service Scheduling and Optimization Strategy Design of Service Recommendation

    Directory of Open Access Journals (Sweden)

    Xiaona Xia

    2017-01-01

    Full Text Available More and more Web services raise the demands of personalized service recommendation; there exist some recommendation technologies, which improve the qualities of service recommendation by using service ranking and collaborative filtering. However, privacy and security are also important issues in service scheduling process; social relationships have been the key factors of interpersonal communication; service selection based on user preferences has become an inevitable trend. Starting from user demand preferences, this paper analyzes social topology and service demand information and obtains trusted social relationships; then we construct the fusion model of service historical preferences and potential ones; according to social service recommendation demands, TSRSR algorithm has completed designing. Through experiments, TSRSR algorithm is much better than the others, which can effectively improve potential preferences’ learning. Furthermore, the research results of this paper have more significance to study the security and privacy of service recommendation.

  6. Design strategies for organic semiconductors beyond the molecular formula.

    Science.gov (United States)

    Henson, Zachary B; Müllen, Klaus; Bazan, Guillermo C

    2012-09-01

    Organic semiconducting materials based on polymers and molecular systems containing an electronically delocalized structure are the basis of emerging optoelectronic technologies such as plastic solar cells and flexible transistors. For isolated molecules, guidelines exist that rely on the molecular formula to tailor the frontier (highest occupied or lowest unoccupied) molecular orbital energy levels and optical absorption profiles. Much less control can be achieved over relevant properties, however, as one makes the transition to the ensemble behaviour characteristic of the solid state. Polymeric materials are also challenging owing to the statistical description of the average number of repeat units. Here we draw attention to the limitations of molecular formulae as predictive tools for achieving properties relevant to device performances. Illustrative examples highlight the relevance of organization across multiple length scales, and how device performances--although relevant for practical applications--poorly reflect the success of molecular design.

  7. Design Strategies for Ultra-high Efficiency Photovoltaics

    Science.gov (United States)

    Warmann, Emily Cathryn

    While concentrator photovoltaic cells have shown significant improvements in efficiency in the past ten years, once these cells are integrated into concentrating optics, connected to a power conditioning system and deployed in the field, the overall module efficiency drops to only 34 to 36%. This efficiency is impressive compared to conventional flat plate modules, but it is far short of the theoretical limits for solar energy conversion. Designing a system capable of achieving ultra high efficiency of 50% or greater cannot be achieved by refinement and iteration of current design approaches. This thesis takes a systems approach to designing a photovoltaic system capable of 50% efficient performance using conventional diode-based solar cells. The effort began with an exploration of the limiting efficiency of spectrum splitting ensembles with 2 to 20 sub cells in different electrical configurations. Incorporating realistic non-ideal performance with the computationally simple detailed balance approach resulted in practical limits that are useful to identify specific cell performance requirements. This effort quantified the relative benefit of additional cells and concentration for system efficiency, which will help in designing practical optical systems. Efforts to improve the quality of the solar cells themselves focused on the development of tunable lattice constant epitaxial templates. Initially intended to enable lattice matched multijunction solar cells, these templates would enable increased flexibility in band gap selection for spectrum splitting ensembles and enhanced radiative quality relative to metamorphic growth. The III-V material family is commonly used for multijunction solar cells both for its high radiative quality and for the ease of integrating multiple band gaps into one monolithic growth. The band gap flexibility is limited by the lattice constant of available growth templates. The virtual substrate consists of a thin III-V film with the desired

  8. Challenges beyond elimination in leprosy.

    Science.gov (United States)

    Naaz, Farah; Mohanty, Partha Sarathi; Bansal, Avi Kumar; Kumar, Dilip; Gupta, Umesh Datta

    2017-01-01

    Every year >200,000 new leprosy cases are registered globally. This number has been fairly stable over the past 8 years. The World Health Organization has set a target to interrupt the transmission of leprosy globally by 2020. It is important, in terms of global action and research activities, to consider the eventuality of multidrug therapy (MDT) resistance developing. It is necessary to measure disease burden comprehensively, and contact-centered preventive interventions should be part of a global elimination strategy. Drug resistance is the reduction in effectiveness of a drug such as an antimicrobial or an antineoplastic in curing a disease or condition. MDT has proven to be a powerful tool in the control of leprosy, especially when patients report early and start prompt treatment. Adherence to and its successful completion is equally important. This paper has reviewed the current state of leprosy worldwide and discussed the challenges and also emphasizes the challenge beyond the elimination in leprosy.

  9. Characterizing the Aedes aegypti Population in a Vietnamese Village in Preparation for a Wolbachia-Based Mosquito Control Strategy to Eliminate Dengue

    Science.gov (United States)

    Jeffery, Jason A. L.; Thi Yen, Nguyen; Nam, Vu Sinh; Nghia, Le Trung; Hoffmann, Ary A.; Kay, Brian H.; Ryan, Peter A.

    2009-01-01

    Background A life-shortening strain of the obligate intracellular bacteria Wolbachia, called wMelPop, is seen as a promising new tool for the control of Aedes aegypti. However, developing a vector control strategy based on the release of mosquitoes transinfected with wMelPop requires detailed knowledge of the demographics of the target population. Methodology/Principal Findings In Tri Nguyen village (611 households) on Hon Mieu Island in central Vietnam, we conducted nine quantitative entomologic surveys over 14 months to determine if Ae. aegypti populations were spatially and temporally homogenous, and to estimate population size. There was no obvious relationship between mosquito (larval, pupal or adult) abundance and temperature and rainfall, and no area of the village supported consistently high numbers of mosquitoes. In almost all surveys, key premises produced high numbers of Ae. aegypti. However, these premises were not consistent between surveys. For an intervention based on a single release of wMelPop-infected Ae. aegypti, release ratios of infected to uninfected adult mosquitoes of all age classes are estimated to be 1.8–6.7∶1 for gravid females (and similarly aged males) or teneral adults, respectively. We calculated that adult female mosquito abundance in Tri Nguyen village could range from 1.1 to 43.3 individuals of all age classes per house. Thus, an intervention could require the release of 2–78 wMelPop-infected gravid females and similarly aged males per house, or 7–290 infected teneral female and male mosquitoes per house. Conclusions/Significance Given the variability we encountered, this study highlights the importance of multiple entomologic surveys when evaluating the spatial structure of a vector population or estimating population size. If a single release of wMelPop-infected Ae. aegypti were to occur when wild Ae. aegypti abundance was at its maximum, a preintervention control program would be necessary to ensure that there was no

  10. Characterizing the Aedes aegypti population in a Vietnamese village in preparation for a Wolbachia-based mosquito control strategy to eliminate dengue.

    Directory of Open Access Journals (Sweden)

    Jason A L Jeffery

    Full Text Available BACKGROUND: A life-shortening strain of the obligate intracellular bacteria Wolbachia, called wMelPop, is seen as a promising new tool for the control of Aedes aegypti. However, developing a vector control strategy based on the release of mosquitoes transinfected with wMelPop requires detailed knowledge of the demographics of the target population. METHODOLOGY/PRINCIPAL FINDINGS: In Tri Nguyen village (611 households on Hon Mieu Island in central Vietnam, we conducted nine quantitative entomologic surveys over 14 months to determine if Ae. aegypti populations were spatially and temporally homogenous, and to estimate population size. There was no obvious relationship between mosquito (larval, pupal or adult abundance and temperature and rainfall, and no area of the village supported consistently high numbers of mosquitoes. In almost all surveys, key premises produced high numbers of Ae. aegypti. However, these premises were not consistent between surveys. For an intervention based on a single release of wMelPop-infected Ae. aegypti, release ratios of infected to uninfected adult mosquitoes of all age classes are estimated to be 1.8-6.7ratio1 for gravid females (and similarly aged males or teneral adults, respectively. We calculated that adult female mosquito abundance in Tri Nguyen village could range from 1.1 to 43.3 individuals of all age classes per house. Thus, an intervention could require the release of 2-78 wMelPop-infected gravid females and similarly aged males per house, or 7-290 infected teneral female and male mosquitoes per house. CONCLUSIONS/SIGNIFICANCE: Given the variability we encountered, this study highlights the importance of multiple entomologic surveys when evaluating the spatial structure of a vector population or estimating population size. If a single release of wMelPop-infected Ae. aegypti were to occur when wild Ae. aegypti abundance was at its maximum, a preintervention control program would be necessary to ensure that

  11. Design Protocols and Analytical Strategies that Incorporate Structural Reliability Models

    Science.gov (United States)

    Duffy, Stephen F.

    1997-01-01

    Ceramic matrix composites (CMC) and intermetallic materials (e.g., single crystal nickel aluminide) are high performance materials that exhibit attractive mechanical, thermal and chemical properties. These materials are critically important in advancing certain performance aspects of gas turbine engines. From an aerospace engineer's perspective the new generation of ceramic composites and intermetallics offers a significant potential for raising the thrust/weight ratio and reducing NO(x) emissions of gas turbine engines. These aspects have increased interest in utilizing these materials in the hot sections of turbine engines. However, as these materials evolve and their performance characteristics improve a persistent need exists for state-of-the-art analytical methods that predict the response of components fabricated from CMC and intermetallic material systems. This need provided the motivation for the technology developed under this research effort. Continuous ceramic fiber composites exhibit an increase in work of fracture, which allows for "graceful" rather than catastrophic failure. When loaded in the fiber direction, these composites retain substantial strength capacity beyond the initiation of transverse matrix cracking despite the fact that neither of its constituents would exhibit such behavior if tested alone. As additional load is applied beyond first matrix cracking, the matrix tends to break in a series of cracks bridged by the ceramic fibers. Any additional load is born increasingly by the fibers until the ultimate strength of the composite is reached. Thus modeling efforts supported under this research effort have focused on predicting this sort of behavior. For single crystal intermetallics the issues that motivated the technology development involved questions relating to material behavior and component design. Thus the research effort supported by this grant had to determine the statistical nature and source of fracture in a high strength, Ni

  12. Tailoring DNA vaccines: designing strategies against HER2 positive cancers

    Directory of Open Access Journals (Sweden)

    Cristina eMarchini

    2013-05-01

    Full Text Available The crucial role of HER2 in epithelial transformation and its selective overexpression on cancer tissues makes it an ideal target for cancer immunotherapies such as passive immunotherapy with Trastuzumab. There are, however, a number of concerns regarding the use of monoclonal antibodies which include resistance, repeated treatments, considerable costs and side effects that make active immunotherapies against HER2 desirable alternative approaches. The efficacy of anti-HER2 DNA vaccination has been widely demonstrated in transgenic cancer-prone mice, which recapitulate several features of human breast cancers. Nonetheless, the rational design of a cancer vaccine able to trigger a long lasting immunity, and thus prevent tumor recurrence in patients, would require the understanding of how tolerance and immunosuppression regulate antitumor immune responses and, at the same time, the identification of the most immunogenic portions of the target protein. We herein retrace the findings that led to our most promising DNA vaccines that, by encoding human/rat chimeric forms of HER2, are able to circumvent peripheral tolerance. Preclinical data obtained with these chimeric DNA vaccines have provided the rationale for their use in an ongoing phase I clinical trial (EudraCT 2011-001104-34.

  13. DESIGN OF THE THREE-LEVEL MULTICRITERIAL STRATEGY OF HYBRID MARINE POWER PLANT CONTROL FOR A COMBINED PROPULSION COMPLEX

    Directory of Open Access Journals (Sweden)

    V.V. Budashko

    2017-04-01

    Full Text Available Purpose. Efficiency of hybrid ships power plants (SPP combined propulsion complexes (CPC by various criteria for energy management systems strategies. Methodology. Based on the classification system topologies SPP CPC for mechanical, electrical and hybrid types of motors schematic diagrams of management strategies for the criterion of minimum power consumption are defined. Changing the technical component of the traditional approach to building hybrid ships electric power systems (SEPS SPP CPC the principle of modifying the structure of SEPS is applied with the integration of additional static alternative power source as dynamic reserve, which allowed to meet modern requirements for energy efficiency, levels of vibration, noise and degradation effects produced to SPP CPC, in all areas of the energy for the transfer of power from energy to propellers. Modeling of power transmission of energy to propellers in MatLab/Simulink is conducted, using blocks of optimization library and definition of identity markers. Results. Major advantages and disadvantages SPP CPC depending on the topology of energy distribution systems are determined. According to the chosen structure system electricity characteristics were obtained in the process of power transmission SPP CPC and power systems and their control strategies in terms of increased efficiency and eliminate these drawbacks. And finally, mathematical apparatus for research in terms of the development of methods for designing and managing SPP hybrid CPC to reduced fuel consumption, emissions into the environment and improving maintainability, flexibility and comfort level are improved. Originality. The methodology for improving SPP CPC implementation by developing methods of identification markers mutually influencing processes in SPP CPC and the development of implementing these methods of settlement and information systems. Practical value. The method enables iterative optimization parameters SPP CPC, it

  14. Simple plant-based design strategies for volatile organic pollutants

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, M.; Erickson, L.E.; Davis, L.C.

    1999-12-31

    Vegetation which enhances in-situ biodegradation of organic compounds can play a key role in the bioremediation of such contaminants in polluted soils and groundwater. Plants may act directly on some contaminants by degrading them, but their main effect is to enhance microbial populations in the thizosphere. Microbially mediated transformations are thus indirectly facilitated by root exudates which nourish the indigenous microorganisms. Plants may also be viewed as a solar driven pump-and-treat system which can contain a plume and reduce the spread of contaminated water. Laboratory investigations carried out in a growth chamber with alfalfa plants provide evidence for the (microbially mediated) biodegradation of organic compounds such as toluene, phenol and TCE. Alfalfa plants tolerate concentrations of these organics in contaminated water up to 100 mg/L. They facilitate transfer of the contaminants from the saturated to the vadose zone. For volatile organic compounds such as TCE, vegetation provides a controlled release of compounds and hence assures dilution of the TCE evapotranspired into the atmosphere from contaminated soils. Using a range of calculated plausible scenarios, it is shown that intermedia transfer caused by volatilization associated with plants is most unlikely to lead to exceedance of standards for gas phase contamination, for most volatile contaminants. Possible action level exceedances might occur with highly toxic substances including vinyl chloride and carbon tetrachloride, if they re present in ground water at levels above kilogram amounts in a single plume of a few hectares, and released by vigorously growing plants under hot dry conditions. Information needed for the calculation and design of plant-based bioremediation systems for typical sites is discussed in this paper.

  15. Universal leakage elimination

    International Nuclear Information System (INIS)

    Byrd, Mark S.; Lidar, Daniel A.; Wu, L.-A.; Zanardi, Paolo

    2005-01-01

    'Leakage' errors are particularly serious errors which couple states within a code subspace to states outside of that subspace, thus destroying the error protection benefit afforded by an encoded state. We generalize an earlier method for producing leakage elimination decoupling operations and examine the effects of the leakage eliminating operations on decoherence-free or noiseless subsystems which encode one logical, or protected qubit into three or four qubits. We find that by eliminating a large class of leakage errors, under some circumstances, we can create the conditions for a decoherence-free evolution. In other cases we identify a combined decoherence-free and quantum error correcting code which could eliminate errors in solid-state qubits with anisotropic exchange interaction Hamiltonians and enable universal quantum computing with only these interactions

  16. Strategies in architectural design and urban planning in the context of energy efficiency in buildings

    Directory of Open Access Journals (Sweden)

    Vuksanović Dušan

    2007-01-01

    Full Text Available Some of the design concepts in architecture and urban planning, created on demands of energy efficiency, that apply in early stages of design process a schematic design, i.e. in the phase of creating the basis of architectural or planning solution, are analyzed in this paper. These design strategies have a role to be comprehensive enough to provide application of their key potentials, but at the same time they need to remain simple enough and not burden a designer with inadequate number of information. Design models for passive heating, passive cooling and natural lighting that refer to the buildings mainly have been considered, together with the principles for the settlements or building groups. Guiding a design concept towards the one of described design principles e.g. their application within the diurnal and seasonal cycles, depends on local climatic conditions and type of building (residential, commercial or educational. The presentation of a model is followed by the explanation of the phenomena of impacts/influences (climate program and answers (the concept, passive components related to a certain strategy, and by the illustration of a strategy on a realized object (case study. Issues of design strategies on energy efficiency are considered through different levels, e.g. through spatial organization, form and added components of buildings, as well as structure and characteristics of elements of external structures - facades and roofs.

  17. Entrepreneurship and response strategies to challenges in engineering and design education

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik; Pineda, Andres Felipe Valderrama

    2012-01-01

    Entrepreneurship is one of the contemporary expectations to engineers and their training at engineering schools. But what is entrepreneurship? We propose three different conceptualizations of entrepreneurship in engineering and design programs. They are: (1) the technology-driven promotion response...... centered in technological development; (2) the business selection response strategy centered in business skills (which should be additional to the technical skills); and (3) the design intervention response strategy focused on a network approach to technology, business and society. These conceptualizations...... are response strategies from engineering communities, professors and institutions to perceived challenges. We argue that all engineering educators deal in one way or another with the three response strategies when approaching issues of curricular design, academicreform and the international accreditation...

  18. Model-based Organization Manning, Strategy, and Structure Design via Team Optimal Design (TOD) Methodology

    National Research Council Canada - National Science Library

    Levchuk, Georgiy; Chopra, Kari; Paley, Michael; Levchuk, Yuri; Clark, David

    2005-01-01

    This paper describes a quantitative Team Optimal Design (TOD) methodology and its application to the design of optimized manning for E-10 Multi-sensor Command and Control Aircraft. The E-10 (USAF, 2002...

  19. Observer-based output-feedback control to eliminate torsional drill-string vibrations

    NARCIS (Netherlands)

    Vromen, T.G.M.; Wouw, van de N.; Doris, A.; Astrid, P.; Nijmeijer, H.

    2014-01-01

    Torsional stick-slip vibrations decrease the performance and reliability of drilling systems used for the exploration of energy and mineral resources. In this work, we present the design of a nonlinear observer-based output-feedback control strategy to eliminate these vibrations. We apply the

  20. Observer based output-feedback control to eliminate rorsional drill-string vibrations

    NARCIS (Netherlands)

    Vromen, T.G.M.; van de Wouw, N.; Doris, A.; Astrid, P.; Nijmeijer, H.

    2014-01-01

    Torsional stick-slip vibrations decrease the performance and reliability of drilling systems used for the exploration of energy and mineral resources. In this work, we present the design of a nonlinear observer-based outputfeedback control strategy to eliminate these vibrations. We apply the

  1. Educational strategies for architectural design management : the design of a new curriculum

    NARCIS (Netherlands)

    Prins, M.; Halman, J.I.M.

    1996-01-01

    This paper is about the design of a new curriculum on Architectural Design Management Systems. This curriculum is embedded in the Stan Ackermans lnstitute(SAI). The SAI is a school for continuing post graduate education on technological design. First some recent developments in the building industry

  2. A review of different behavior modification strategies designed to reduce sedentary screen behaviors in children.

    Science.gov (United States)

    Steeves, Jeremy A; Thompson, Dixie L; Bassett, David R; Fitzhugh, Eugene C; Raynor, Hollie A

    2012-01-01

    Previous research suggests that reducing sedentary screen behaviors may be a strategy for preventing and treating obesity in children. This systematic review describes strategies used in interventions designed to either solely target sedentary screen behaviors or multiple health behaviors, including sedentary screen behaviors. Eighteen studies were included in this paper; eight targeting sedentary screen behaviors only, and ten targeting multiple health behaviors. All studies used behavior modification strategies for reducing sedentary screen behaviors in children (aged 1-12 years). Nine studies only used behavior modification strategies, and nine studies supplemented behavior modification strategies with an electronic device to enhance sedentary screen behaviors reductions. Many interventions (50%) significantly reduced sedentary screen behaviors; however the magnitude of the significant reductions varied greatly (-0.44 to -3.1 h/day) and may have been influenced by the primary focus of the intervention, number of behavior modification strategies used, and other tools used to limit sedentary screen behaviors.

  3. Usability Design Strategies for Children: Developing Children's Learning and Knowledge in Decreasing Their Dental Anxiety

    Science.gov (United States)

    Yahaya, Wan Ahmad Jaafar Wan; Salam, Sobihatun Nur Abdul

    2010-01-01

    This paper presents an example of how usability design strategies for children can be designed into educational material using CD-ROM based multimedia application for assisting parents and teachers to develop children's learning and knowledge in decreasing as well as motivate children aged 7-9 years old to reduce their anxious feelings towards…

  4. Reasoning Strategies in the Context of Engineering Design with Everyday Materials

    Science.gov (United States)

    Worsley, Marcelo; Blikstein, Paulo

    2016-01-01

    "Making" represents an increasingly popular label for describing a form of engineering design. While making is growing in popularity, there are still open questions about the strategies that students are using in these activities. Assessing and improving learning in making/ engineering design contexts require that we have a better…

  5. Conceptual design strategy for liquid-metal-wall inertial-fusion reactors

    Energy Technology Data Exchange (ETDEWEB)

    Monsler, M.J.; Meier, W.R.

    1981-02-01

    The liquid-metal-wall chamber has emerged as an attractive reactor concept for inertial fusion energy conversion. The principal feature of this concept is a thick, free-flowing blanket of liquid metal used to protect the structure of the reactor. The development and design of liquid-metal-wall chambers over the past decade provides a basis for formulating a conceptual design strategy for such chambers. Both the attractive and unattractive features of a LMW chamber are enumerated, and a design strategy is formulated which accommodates the engineering constraints while minimizing the liquid-metal flow rate.

  6. Conceptual design strategy for liquid-metal-wall inertial-fusion reactors

    International Nuclear Information System (INIS)

    Monsler, M.J.; Meier, W.R.

    1981-02-01

    The liquid-metal-wall chamber has emerged as an attractive reactor concept for inertial fusion energy conversion. The principal feature of this concept is a thick, free-flowing blanket of liquid metal used to protect the structure of the reactor. The development and design of liquid-metal-wall chambers over the past decade provides a basis for formulating a conceptual design strategy for such chambers. Both the attractive and unattractive features of a LMW chamber are enumerated, and a design strategy is formulated which accommodates the engineering constraints while minimizing the liquid-metal flow rate

  7. Trends in observable passive solar design strategies for existing homes in the U.S

    International Nuclear Information System (INIS)

    Kruzner, Kelly; Cox, Kristin; Machmer, Brian; Klotz, Leidy

    2013-01-01

    Passive design strategies are among the most cost-effective methods to reduce energy consumption in buildings. However, the prevalence of these strategies in existing U.S. homes is not well understood. To help address this issue, this research evaluated a nationally-representative sample of 1000 existing homes distributed geographically across the U.S. Using satellite images, each building was evaluated for three passive design strategies: orientation, roof color, and level of shading. Several statistically significant regional trends were identified. For example, existing homes in the High Plains, Ohio Valley, Northwest, and Southern regions show a statistically significant trend towards orientation in the East–West direction, an effective passive design strategy. Less intuitively, in terms of what would seem to be optimal passive design, buildings in the High Plains and Ohio Valley generally have lighter roof colors than buildings in the warmer Southwest region. At the national level, no statistically significant trends were found towards the passive design strategies evaluated. These trends give us no reason to believe they were a major consideration in the design of existing homes. Policy measures and education may be required to take advantage of the opportunity for cost-effective energy savings through more widespread passive solar design. - Highlights: ► GoogleMaps to examine implementation of cost-effective, observable passive solar strategies in U.S. houses. ► No national trends toward passive solar design in U.S.—a missed opportunity. ► Some regional passive solar trends in U.S. for house orientation, roof color

  8. Design strategy for the combined system of shunt passive and series active filters

    OpenAIRE

    Fujita, Hideki; Akagi, Hirofumi

    1991-01-01

    A design strategy for the combined power filter for a three-phase twelve-pulse thyristor rectifier is proposed. The shunt passive filter, which can minimize the output voltage of the series active filter, is designed and tested in a prototype model. A specially designed shunt passive filter makes it possible to reduce the required rating of the series active filter to 60% compared with a conventional shunt passive filter

  9. Case-based learning in VTLE: An effective strategy for improving learning design

    OpenAIRE

    Guàrdia Ortiz, Lourdes; Sangrà, Albert; Maina, Marcelo Fabián

    2014-01-01

    This article presents preliminary research from an instructional design perspective on the design of the case method as an integral part of pedagogy and technology. Key features and benefits using this teaching and learning strategy in a Virtual Teaching and Learning Environment (VTLE) are identified, taking into account the requirements of the European Higher Education Area (EHEA) for a competence-based curricula design. The implications of these findings for a learning object appro...

  10. Design for experience in the fashion industry: coping strategies in the era of homogenization

    OpenAIRE

    PETERMANS, Ann; Kent, Anthony

    2013-01-01

    The aim of this paper is to focus on how the globalised fashion industry impacts on the way that strategies of clothing brands are translated into the design of their retail environments. The first research question explores the conceptualisation of retail environments by retailers, designers and planners so that they can continue to be perceived as ‘unique’ by customers. The second asks whether retailers, designers and planners can manage the trend towards homogenization in the near future. ...

  11. Distributed iterated elimination of strictly dominated strategies

    NARCIS (Netherlands)

    Witzel, S.A.; Apt, K.R.; Zvesper, J.A.

    2012-01-01

    We characterize epistemic consequences of truthful communication among rational agents in a game-theoretic setting. To this end we introduce normal-form games equipped with an interaction structure, which specifies which groups of players can communicate their preferences with each other. We then

  12. Primary energy implications of different design strategies for an apartment building

    International Nuclear Information System (INIS)

    Tettey, Uniben Yao Ayikoe; Dodoo, Ambrose; Gustavsson, Leif

    2016-01-01

    In this study, we explored the effects of different design strategies on final and primary energy use for production and operation of a newly constructed apartment building. We analysed alternatives of the building “As built” as well as to energy efficiency levels of the Swedish building code and passive house criteria. Our approach is based on achieving improved versions of the building alternatives from combination of design strategies giving the lowest space heating and cooling demand and primary energy use, respectively. We found that the combination of design strategies resulting in the improved building alternatives varies depending on the approach. The improved building alternatives gave up to 19–34% reduction in operation primary energy use compared to the initial alternatives. The share of production primary energy use of the improved building alternatives was 39–54% of the total primary energy use for production, space heating, space cooling and ventilation over 50-year lifespan, compared to 31–42% for the initial alternatives. This study emphasises the importance of incorporating appropriate design strategies to reduce primary energy use for building operation and suggests that combining such strategies with careful choice of building frame materials could result in significant primary energy savings in the built environment. - Highlights: • Primary energy implications of different design strategies were analysed. • The improved building alternatives had 19–34% lower operation primary energy use. • The improved building alternatives had higher production primary energy use. • Still, the improved building alternatives had lower overall primary energy use. • Design strategies should be combined with careful building frame material choice.

  13. Radioactive wastes eliminating device

    International Nuclear Information System (INIS)

    Mitsutsuka, Norimasa.

    1979-01-01

    Purpose: To eliminate impurities and radioactive wastes by passing liquid sodium in a cold trap and an adsorption device. Constitution: Heated sodium is partially extracted from the core of a nuclear reactor by way of a pump, flown into and cooled in heat exchangers and then introduced into a cold trap for removal of impurities. The liquid sodium eliminated with impurities is introduced into an adsorption separator and purified by the elimination of radioactive wastes. The purified sodium is returned to the nuclear reactor. A heater is provided between the cold trap and the adsorption separator, so that the temperature of the liquid sodium introduced into the adsorption separator is not lower than the minimum temperature in the cold trap to thereby prevent deposition of impurities in the adsorption separator. (Kawakami, Y.)

  14. What can Design Bring to Strategy? Designing Thinking as a Tool for Innovation and Change

    NARCIS (Netherlands)

    Kathryn Best

    2011-01-01

    This publication by Kathryn Best accompanied the Lector’s inauguration as head of the research group Cross-media, Brand, Reputation & Design Management (CBRD) in January 2011. The book outlines current debates around the Creative Industries, business and design education and the place of ’well

  15. Frontiers in biomaterials the design, synthetic strategies and biocompatibility of polymer scaffolds for biomedical application

    CERN Document Server

    Cao, Shunsheng

    2014-01-01

    Frontiers in Biomaterials: The Design, Synthetic Strategies and Biocompatibility of Polymer Scaffolds for Biomedical Application, Volume 1" highlights the importance of biomaterials and their interaction with biological system. The need for the development of biomaterials as scaffold for tissue regeneration is driven by the increasing demands for materials that mimic functions of extracellular matrices of body tissues.This ebook covers the latest challenges on the biocompatibility of scaffold overtime after implantation and discusses the requirement of innovative technologies and strategies f

  16. Strategies of Transition to Sustainable Agriculture in Iran II- Inputs Replacement and Designing Agroecosystem

    Directory of Open Access Journals (Sweden)

    Alireza Koocheki

    2018-02-01

    , natural resources could be used more efficiently. Eliminate the use of nonrenewable off farm human inputs that have the potential to harm the environment or the health of farmers, farm workers, or consumers. Mitigation and adaptation strategies in relation to climate change and quantization of transition period from common to sustainable agriculture to reduce economic risks for farmers were regarded in the agro-ecosystem design. Conclusion In general, although different studies were performed in the replacement of ecological inputs instead of common inputs in Iran, needed policy is necessary to transfer findings of these researches to fields. Although the complete studies were not carried out about designing agro-ecosystem, the existence of enough results for two previous steps (increasing inputs efficiency and its replacement could be basic for this step. Therefore, deep researches and studies based on site potential in the ecosystem level should be done in the final step of transition to sustainable agriculture.

  17. Comprehension with Instructional Media for Middle School Science: Holistic Performative Design Strategy and Cognitive Load

    Science.gov (United States)

    Peterson, Matthew Owen

    This study identifies three distinct levels of text-image integration in page design in a linear relationship of lesser to greater integration: prose primary, prose subsumed, and fully integrated strategies. Science textbook pages were redesigned according to these holistic design strategies for 158 7th-grade students. There were three separate treatment tests, as well as a pre-test and post-test, and pilot tests with both undergraduate students and the subjects themselves. Subjects found the fully integrated strategy to produce the most visually interesting designs and the prose primary strategy to produce the least interesting, with prose subsumed definitively in between (according to 95% confidence intervals). The strategy employed significantly altered interest in science subject matter in one of three treatments (ANOVA, P=0.0446), where a Student's t-test revealed that the prose subsumed strategy produced higher interest in subject matter than prose primary. The strategy employed significantly altered comprehension of abstract relationships in one of three treatments (ANOVA, P=0.0202), where a Student's t-test revealed that the fully integrated strategy resulted in greater comprehension than prose primary. For the same treatment condition significant differences were found through ANOVA for factual-level knowledge (P=0.0289) but not conceptual-level knowledge ( P=0.0586). For factual-level knowledge prose primary resulted in lesser comprehension than both prose subsumed and fully integrated. Comprehension is defined according to cognitive load theory. No strategy impact on perception of task difficulty was found. This study was approved by North Carolina State University's Institutional Review Board and Wake County Public School System's Research Review Committee.

  18. Building communication strategy on health prevention through the human-centered design

    Directory of Open Access Journals (Sweden)

    Karine de Mello Freire

    2016-03-01

    Full Text Available It has been identified a latent need for developing efficient communication strategies for prevention of diseases and also, design as a potential agent to create communications artifacts that are able to promote self-care. In order to analyze a design process that develops this kind of artifact, an action research in IAPI Health Center in Porto Alegre was done. The action’s goal was to design a strategy to promote self-care to prevent cervical cancer. The process was conducted from the human centered design approach - HCD, which seeks to create solutions desirable for people and feasible for organizations from three main phases: a Hear, in which inspirations are originated from stories collected from people; b Create, which aims to translate these knowledge into prototypes; and, c Deliver, where the prototypes are tested and developed with users. Communication strategies were supported by design studies about visual-verbal rhetoric. As results, this design approach has shown adequate to create communication strategies targeted at self-care behaviors, aiming to empower users to change their behavior.

  19. Design Driven Innovation as a Differentiation Strategy - in the Context of Automotive Industry

    Directory of Open Access Journals (Sweden)

    Mosarrat Farhana

    2015-07-01

    Full Text Available Though, in the automotive industry, technology is considered as a source of innovation and development, emerging change in consumer perception has brought industry focus on design. Evolution of this industry is closely related to the convergence of technology and design. In such context, implication of design driven innovation strategy in the automotive industry has potential to be explored and to create sustained competitive advantage through balancing customers’ need, technological opportunities and product meaning. The aim of this paper is to give a holistic view of design driven innovation as a differentiation strategy in the automotive industry and its implication for strategic management through some relevant research reviews and empirical information. On the contrary, this research lacks detailed description on industry practice to provide greater breadth, since it attempts to correlate the strategic concept of design with the dynamic capability of a firm in that particular industry.

  20. Designing System Reforms: Using a Systems Approach to Translate Incident Analyses into Prevention Strategies

    Science.gov (United States)

    Goode, Natassia; Read, Gemma J. M.; van Mulken, Michelle R. H.; Clacy, Amanda; Salmon, Paul M.

    2016-01-01

    Advocates of systems thinking approaches argue that accident prevention strategies should focus on reforming the system rather than on fixing the “broken components.” However, little guidance exists on how organizations can translate incident data into prevention strategies that address the systemic causes of accidents. This article describes and evaluates a series of systems thinking prevention strategies that were designed in response to the analysis of multiple incidents. The study was undertaken in the led outdoor activity (LOA) sector in Australia, which delivers supervised or instructed outdoor activities such as canyoning, sea kayaking, rock climbing and camping. The design process involved workshops with practitioners, and focussed on incident data analyzed using Rasmussen's AcciMap technique. A series of reflection points based on the systemic causes of accidents was used to guide the design process, and the AcciMap technique was used to represent the prevention strategies and the relationships between them, leading to the creation of PreventiMaps. An evaluation of the PreventiMaps revealed that all of them incorporated the core principles of the systems thinking approach and many proposed prevention strategies for improving vertical integration across the LOA system. However, the majority failed to address the migration of work practices and the erosion of risk controls. Overall, the findings suggest that the design process was partially successful in helping practitioners to translate incident data into prevention strategies that addressed the systemic causes of accidents; refinement of the design process is required to focus practitioners more on designing monitoring and feedback mechanisms to support decisions at the higher levels of the system. PMID:28066296

  1. Minding Rachlin's Eliminative Materialism

    Science.gov (United States)

    McDowell, J. J.

    2012-01-01

    Rachlin's teleological behaviorism eliminates the first-person ontology of conscious experience by identifying mental states with extended patterns of behavior, and thereby maintains the materialist ontology of science. An alternate view, informed by brain-based and externalist philosophies of mind, is shown also to maintain the materialist…

  2. Eliminating Perinatal HIV Transmission

    Centers for Disease Control (CDC) Podcasts

    In this podcast, CDC’s Dr. Steve Nesheim discusses perinatal HIV transmission, including the importance of preventing HIV among women, preconception care, and timely HIV testing of the mother. Dr. Nesheim also introduces the revised curriculum Eliminating Perinatal HIV Transmission intended for faculty of OB/GYN and pediatric residents and nurse midwifery students.

  3. Solvent-free production of 1,3-diglyceride of CLA: Strategy consideration and protocol design

    DEFF Research Database (Denmark)

    Guo, Zheng; Sun, Yan

    2007-01-01

    of eliminating mass transfer resistance, creating effective interaction for a multiple-phase reaction system and yielding an efficient water removal and a faster reaction rate. Hence, vacuum-driven N2 stirring was considered as the best choice among the tested strategies for the production of pure 1......Enzymatic production of a homogeneous 1,3-diglyceride of polyunsaturated fatty acids (PUFAs) was carried out using Novozym 435 as biocatalyst and conjugated linoleic acid (CLA) as a model fatty acid. Three different operation modes, namely, magnetic stirring under vacuum, vacuum-driven N2 bubbling...... incubated with 10–12 mmol CLA for about 3 h at 45–55 °C and a pressure less than 10 mbar, with enzyme loading of 40–70 g l−1. Among the operational parameters, temperature and reaction time were found to have profound effects on the acylmigration and yield of 1,3-diglyceride. Moreover, the enzyme showed...

  4. Traffic design and signal timing of staggered intersections based on a sorting strategy

    Directory of Open Access Journals (Sweden)

    Zhengyi Cai

    2016-04-01

    Full Text Available A staggered intersection is a special type of intersection in a road network. Its geographical characteristics consist of two T-legged intersections that cause the lost time per cycle to become longer than at cross intersections under conventional signal control, thus leading to low intersection efficiency. This article shows that the problem can be eliminated at the left–right type of staggered intersection by channelization and signal phasing, based on a sorting strategy and pre-signal, which reduce the amount of lost time during the signal cycle using the split distance as the sorting area. VISSIM was used to model and analyze the proposed method as well as the conventional method for comparison purposes. The simulation revealed that the proposed method reduced the average delays and maximum queue lengths in each movement and for the entire intersection, both in the peak hours and in the off-peak hour.

  5. A methodology for the sustainable design and implementation strategy of CO2 utilization processes

    DEFF Research Database (Denmark)

    Roh, Kosan; Frauzem, Rebecca; Nguyen, Tuan B. H.

    2016-01-01

    design and analysis is discussed as only limited amounts of process data is available for determining the optimal processing path and in the third stage the issue of implementation strategy is considered. As examples, two CO2 utilization methods for methanol production, combined reforming and direct...... synthesis are considered. Methanol plants employing such methods are developed using synthesis-design and simulation tools and their evaluation indicators are calculated under various implementation strategies. It is demonstrated that integrating or replacing an existing conventional methanol plant...

  6. Life cycle design and design management strategies in fashion apparel manufacturing

    Science.gov (United States)

    Tutia, R.; Mendes, FD; Ventura, A.

    2017-10-01

    The generation of solid textile waste in the process of development and clothing production is an error that causes serious damages to the environment and must be minimized. The greatest volume of textile residues is generated by the department of cut, such as textiles parings and snips that are not used in the productive process. (MILAN et al, 2007). One way to conceive new products environmently conscious is turned to the adoption of a methodology based on Life Cycle Design (LCD) and Design Management.

  7. Modeling in the quality by design environment: Regulatory requirements and recommendations for design space and control strategy appointment.

    Science.gov (United States)

    Djuris, Jelena; Djuric, Zorica

    2017-11-30

    Mathematical models can be used as an integral part of the quality by design (QbD) concept throughout the product lifecycle for variety of purposes, including appointment of the design space and control strategy, continual improvement and risk assessment. Examples of different mathematical modeling techniques (mechanistic, empirical and hybrid) in the pharmaceutical development and process monitoring or control are provided in the presented review. In the QbD context, mathematical models are predominantly used to support design space and/or control strategies. Considering their impact to the final product quality, models can be divided into the following categories: high, medium and low impact models. Although there are regulatory guidelines on the topic of modeling applications, review of QbD-based submission containing modeling elements revealed concerns regarding the scale-dependency of design spaces and verification of models predictions at commercial scale of manufacturing, especially regarding real-time release (RTR) models. Authors provide critical overview on the good modeling practices and introduce concepts of multiple-unit, adaptive and dynamic design space, multivariate specifications and methods for process uncertainty analysis. RTR specification with mathematical model and different approaches to multivariate statistical process control supporting process analytical technologies are also presented. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Computational Fragment-Based Drug Design: Current Trends, Strategies, and Applications.

    Science.gov (United States)

    Bian, Yuemin; Xie, Xiang-Qun Sean

    2018-04-09

    Fragment-based drug design (FBDD) has become an effective methodology for drug development for decades. Successful applications of this strategy brought both opportunities and challenges to the field of Pharmaceutical Science. Recent progress in the computational fragment-based drug design provide an additional approach for future research in a time- and labor-efficient manner. Combining multiple in silico methodologies, computational FBDD possesses flexibilities on fragment library selection, protein model generation, and fragments/compounds docking mode prediction. These characteristics provide computational FBDD superiority in designing novel and potential compounds for a certain target. The purpose of this review is to discuss the latest advances, ranging from commonly used strategies to novel concepts and technologies in computational fragment-based drug design. Particularly, in this review, specifications and advantages are compared between experimental and computational FBDD, and additionally, limitations and future prospective are discussed and emphasized.

  9. Vernacular design based on sustainable disaster’s mitigation communication and education strategy

    International Nuclear Information System (INIS)

    Mansoor, Alvanov Zpalanzani

    2015-01-01

    Indonesia is located between three active tectonic plates, which are prone to natural disasters such as earthquake, volcanic eruption, and also giant tidal wave-tsunami. Adequate infrastructure plays an important role in disaster mitigation, yet without good public awareness, the mitigation process won’t be succeeded. The absence of awareness can lead to infrastructure mistreatment. Several reports on lack of understanding or misinterpretation of disaster mitigation especially from rural and coastal communities need to be solved, especially from communication aspects. This is an interdisciplinary study on disaster mitigation communication design and education strategy from visual communication design studies paradigm. This paper depicts research results which applying vernacular design base to elaborate sustainable mitigation communication and education strategy on various visual media and social campaigns. This paper also describes several design approaches which may becomes way to elaborate sustainable awareness and understanding on disaster mitigation among rural and coastal communities in Indonesia

  10. A strategy for reducing turnaround time in design optimization using a distributed computer system

    Science.gov (United States)

    Young, Katherine C.; Padula, Sharon L.; Rogers, James L.

    1988-01-01

    There is a need to explore methods for reducing lengthly computer turnaround or clock time associated with engineering design problems. Different strategies can be employed to reduce this turnaround time. One strategy is to run validated analysis software on a network of existing smaller computers so that portions of the computation can be done in parallel. This paper focuses on the implementation of this method using two types of problems. The first type is a traditional structural design optimization problem, which is characterized by a simple data flow and a complicated analysis. The second type of problem uses an existing computer program designed to study multilevel optimization techniques. This problem is characterized by complicated data flow and a simple analysis. The paper shows that distributed computing can be a viable means for reducing computational turnaround time for engineering design problems that lend themselves to decomposition. Parallel computing can be accomplished with a minimal cost in terms of hardware and software.

  11. Novel design methods and control strategies for oil and gas offshore power systems

    DEFF Research Database (Denmark)

    Pierobon, Leonardo

    content), or when the thermal stresses on the working fluid should be minimized. Additionally, the controller is demonstrated to improve the dynamic flexibility of the plant compared to the reference controller designed by the gas turbine manufacturer.The model predictive control can reduce the frequency......This doctoral thesis is devoted to the research of innovative design methods and control strategies for power systems supplying future and existing oshore oil and gas facilities.The author uses these methods to address five research challenges: i) the definitionof the optimal waste heat recovery...... technology, ii) the identification of the best working fluid to design ecient, light and cost-competitive waste heat recovery units, iii) the integration of dynamic criteria in the project phase to discard infeasible designs, iv) the development of a novel control strategy to optimally operate the power...

  12. Vernacular design based on sustainable disaster’s mitigation communication and education strategy

    Energy Technology Data Exchange (ETDEWEB)

    Mansoor, Alvanov Zpalanzani, E-mail: nova.zp@gmail.com, E-mail: alvanov@fsrd.itb.ac.id [Visual Communication Design Study Program, Faculty of Art and Design, Institut Teknologi Bandung Jalan Ganesa No. 10, Bandung 40132 (Indonesia)

    2015-04-24

    Indonesia is located between three active tectonic plates, which are prone to natural disasters such as earthquake, volcanic eruption, and also giant tidal wave-tsunami. Adequate infrastructure plays an important role in disaster mitigation, yet without good public awareness, the mitigation process won’t be succeeded. The absence of awareness can lead to infrastructure mistreatment. Several reports on lack of understanding or misinterpretation of disaster mitigation especially from rural and coastal communities need to be solved, especially from communication aspects. This is an interdisciplinary study on disaster mitigation communication design and education strategy from visual communication design studies paradigm. This paper depicts research results which applying vernacular design base to elaborate sustainable mitigation communication and education strategy on various visual media and social campaigns. This paper also describes several design approaches which may becomes way to elaborate sustainable awareness and understanding on disaster mitigation among rural and coastal communities in Indonesia.

  13. Vernacular design based on sustainable disaster's mitigation communication and education strategy

    Science.gov (United States)

    Mansoor, Alvanov Zpalanzani

    2015-04-01

    Indonesia is located between three active tectonic plates, which are prone to natural disasters such as earthquake, volcanic eruption, and also giant tidal wave-tsunami. Adequate infrastructure plays an important role in disaster mitigation, yet without good public awareness, the mitigation process won't be succeeded. The absence of awareness can lead to infrastructure mistreatment. Several reports on lack of understanding or misinterpretation of disaster mitigation especially from rural and coastal communities need to be solved, especially from communication aspects. This is an interdisciplinary study on disaster mitigation communication design and education strategy from visual communication design studies paradigm. This paper depicts research results which applying vernacular design base to elaborate sustainable mitigation communication and education strategy on various visual media and social campaigns. This paper also describes several design approaches which may becomes way to elaborate sustainable awareness and understanding on disaster mitigation among rural and coastal communities in Indonesia.

  14. Implementing Universal Design Strategies in Municipalities - A Multidisciplinary Approach to Universal Design and Public Health.

    Science.gov (United States)

    Jensen, Roger

    2016-01-01

    Based on a national program, the regional authorities stimulated each of the 18 municipalities in Telemark 2012-15 to plan and build promenades with universal design. The cooperation between different disciplines was an important factor for good results. The project continues from 2016.

  15. Strategies of design, development and activation of the Nova control system

    International Nuclear Information System (INIS)

    Holloway, F.W.

    1983-01-01

    Nova and Novette are large complex experimental laser facilities which require extensive and sophisticated control systems for their successful operation. Often, in major controls projects, certain invisible aspects of the project, such as overall strategy, management, resources and historical constraints, have a more profound effect upon success than any specific hardware/software design. The design and performance of the Nova/Novette laser control system will be presented with special emphasis upon these often controversial aspects

  16. Reasoning Strategies in the Context of Engineering Design with Everyday Materials

    OpenAIRE

    Worsley, Marcelo; Blikstein, Paulo

    2017-01-01

    ‘‘Making’’ represents an increasingly popular label for describing a form of engineering design. While making is growing in popularity, there are still open questions about the strategies that students are using in these activities. Assessing and improving learning in making/ engineering design contexts require that we have a better understanding of where students’ ideas are coming from and a better way to characterize student progress in open-ended learning environments. In this article, we ...

  17. Strategies of design, development and activation of the Nova control system

    Energy Technology Data Exchange (ETDEWEB)

    Holloway, F.W.

    1983-06-30

    Nova and Novette are large complex experimental laser facilities which require extensive and sophisticated control systems for their successful operation. Often, in major controls projects, certain invisible aspects of the project, such as overall strategy, management, resources and historical constraints, have a more profound effect upon success than any specific hardware/software design. The design and performance of the Nova/Novette laser control system will be presented with special emphasis upon these often controversial aspects.

  18. A literature review on the improvement strategies of passive design for the roofing system of the modern house in a hot and humid climate region

    Directory of Open Access Journals (Sweden)

    Qairuniza Roslan

    2016-03-01

    Full Text Available Increase of indoor temperature compared with outdoor temperature is a major concern in modern house design. Occupants suffer from this uncomfortable condition because of overheating indoor temperature. Poor passive design causes heat to be trapped, which influences the rise in indoor temperature. The upper part, which covers the area of the roof, is the most critical part of the house that is exposed to heat caused by high solar radiation and high emissivity levels. During daytime, the roof accumulates heat, which increases the indoor temperature and affects the comfort level of the occupants. To maintain the indoor temperature within the comfort level, most house designs usually depend on mechanical means by using fans or air conditioning systems. The dependence on a mechanical ventilation system could lead to additional costs for its installation, operation, and maintenance. Thus, this study concentrates on reviews on passive design and suggests recommendations for future developments. New proposals or strategies are proposed to improve the current passive design through ventilated and cool roof systems. It is possible to achieve the comfort level inside a house throughout the day by reducing the transmitted heat into the indoor environment and eliminating the internal hot air. These recommendations could become attractive strategies in providing a comfortable indoor temperature to the occupants as well as in minimizing energy consumption.

  19. A conceptual design strategy for liquid-metal-wall inertial fusion reactors

    International Nuclear Information System (INIS)

    Monsler, M.J.; Meier, W.R.

    1981-01-01

    The liquid-metal-wall chamber has emerged as an attractive reactor concept for inertial fusion energy conversion. The principal feature of this concept is a thick, free-flowing blanket of liquid metal used to protect the structure of the reactor. The development and design of liquid-metal-wall chambers over the past decade are reviewed from the perspective of formulating a conceptual design strategy for such chambers. The basis for the design strategy is set by enumerating both the attractive and unattractive features of a LMW chamber. Past concepts are then reviewed to identify conceptual design approaches and physical configurations that enhance the positive aspects and minimize the negative aspects. A detailed description of the engineering considerations is given, including such topics as the selection of a liquid metal, control of radiation damage, selection of structural material, control of tritium breeding and extraction, control of wall stress, and designing for a given rep-rate. Finally, a design strategy is formulated which accomodates the engineering constraints while minimizing the liquid-metal flow rate. (orig.)

  20. ASIT--A Problem Solving Strategy for Education and Eco-Friendly Sustainable Design

    Science.gov (United States)

    Turner, Steve

    2009-01-01

    There is growing recognition of the role teaching and learning experiences in technology education can contribute to Education for Sustainable Development. It appears, however, that in the Technology Education classroom little or no change has been achieved to the practice of designing and problem solving strategies oriented towards sustainable…

  1. User-Centered Design Strategies for Massive Open Online Courses (MOOCs)

    Science.gov (United States)

    Mendoza-Gonzalez, Ricardo, Ed.

    2016-01-01

    In today's society, educational opportunities have evolved beyond the traditional classroom setting. Most universities have implemented virtual learning environments in an effort to provide more opportunities for potential or current students seeking alternative and more affordable learning solutions. "User-Centered Design Strategies for…

  2. Linking Serious Game Narratives with Pedagogical Theories and Pedagogical Design Strategies

    Science.gov (United States)

    De Troyer, Olga; Van Broeckhoven, Frederik; Vlieghe, Joachim

    2017-01-01

    Narrative-based serious games present pedagogical content and interventions through an interactive narrative. To ensure effective learning in such kind of serious games, designers are not only faced with the challenge of creating a compelling narrative, but also with the additional challenge of incorporating suitable pedagogical strategies.…

  3. Design and Implementation of Cancellation Tasks for Visual Search Strategies and Visual Attention in School Children

    Science.gov (United States)

    Wang, Tsui-Ying; Huang, Ho-Chuan; Huang, Hsiu-Shuang

    2006-01-01

    We propose a computer-assisted cancellation test system (CACTS) to understand the visual attention performance and visual search strategies in school children. The main aim of this paper is to present our design and development of the CACTS and demonstrate some ways in which computer techniques can allow the educator not only to obtain more…

  4. Designing efficient nitrous oxide sampling strategies in agroecosystems using simulation models

    Science.gov (United States)

    Debasish Saha; Armen R. Kemanian; Benjamin M. Rau; Paul R. Adler; Felipe Montes

    2017-01-01

    Annual cumulative soil nitrous oxide (N2O) emissions calculated from discrete chamber-based flux measurements have unknown uncertainty. We used outputs from simulations obtained with an agroecosystem model to design sampling strategies that yield accurate cumulative N2O flux estimates with a known uncertainty level. Daily soil N2O fluxes were simulated for Ames, IA (...

  5. A balancing act? The implications of mixed strategies for performance measurement system design

    NARCIS (Netherlands)

    Dekker, H.C.; Groot, T.L.C.M.; Schoute, M.

    2013-01-01

    This paper examines how firms design performance measurement systems (PMSs) to support the pursuit of mixed strategies. In particular, we examine the implications of firms' joint strategic emphasis on both low cost and differentiation for their use of performance measurement and incentive

  6. Eliminating Perinatal HIV Transmission

    Centers for Disease Control (CDC) Podcasts

    2012-11-26

    In this podcast, CDC’s Dr. Steve Nesheim discusses perinatal HIV transmission, including the importance of preventing HIV among women, preconception care, and timely HIV testing of the mother. Dr. Nesheim also introduces the revised curriculum Eliminating Perinatal HIV Transmission intended for faculty of OB/GYN and pediatric residents and nurse midwifery students.  Created: 11/26/2012 by Division of HIV/AIDS Prevention.   Date Released: 11/26/2012.

  7. A low-power multi port register file design using a low-swing strategy

    International Nuclear Information System (INIS)

    Yan Hao; Liu Yan; Hua Siliang; Wang Donghui; Hou Chaohuan

    2012-01-01

    A low-power register file is designed by using a low-swing strategy and modified NAND address decoders. The proposed low-swing strategy is based on the feedback scheme and uses dynamic logic to reduce the active feedback power. This method contains two parts: WRITE and READ strategy. In the WRITE low-swing scheme, the modified memory cell is used to support low-swing WRITE. The modified NAND decoder not only dissipates less power, but also enables a great deal of area reduction. Compared with the conventional single-ended register file, the low-swing strategy saves 34.5% and 51.15% bit-line power in WRITE and READ separately. The post simulation results indicate a 39.4% power improvement when the twelve ports are all busy. (semiconductor integrated circuits)

  8. Development strategy and conceptual design of China Lead-based Research Reactor

    International Nuclear Information System (INIS)

    Wu, Yican; Bai, Yunqing; Song, Yong; Huang, Qunying; Zhao, Zhumin; Hu, Liqin

    2016-01-01

    Highlights: • China LEAd-based Reactor (CLEAR) proposed by Institute of Nuclear Energy Safety Technology (INEST) is selected as the ADS reference reactor. • The Chinese ADS development program consists of three stages, and during the first stage, a 10 MW th lead-based research reactor named CLEAR-I will be built with subcritical and critical dual-mode operation capability for validation of ADS transmutation system and lead cooled fast reactor technology. • Major design principles of CLEAR-I are oriented at technology feasibility, safety reliability, experiment flexibility and technology continuity. Followed by the development strategy and design principles, CLEAR-I design options and conceptual design scenarios are presented. - Abstract: Chinese Academy of Sciences (CAS) launched an engineering project to develop an Accelerator Driven System (ADS) for nuclear waste transmutation since 2011, and China LEAd-based Reactor (CLEAR) proposed by Institute of Nuclear Energy Safety Technology (INEST) is selected as the ADS reference reactor. In this paper, the development strategy and conceptual design of China Lead-based Research Reactor are proposed. The Chinese ADS development program consists of three stages, and during the first stage, a 10 MW th lead-based research reactor named CLEAR-I will be built with subcritical and critical dual-mode operation capability for validation of ADS transmutation system and lead cooled fast reactor technology. Major design principles of CLEAR-I are oriented at technology feasibility, safety reliability, experiment flexibility and technology continuity. Followed by the development strategy and design principles, CLEAR-I design options and conceptual design scenarios are presented.

  9. Durable past - sustainable future; Heritage-based design; Designing from Heritage. Strategies for Conservation and Conversion

    Directory of Open Access Journals (Sweden)

    Irmgard van Koningsbruggen

    2018-06-01

    elkaar. De opleidingsnaam vanaf 2004, ‘rMIT ’, weerspiegelde deze koers van versmelten. De ontwerpopgave werd verbonden met onderzoek van de cultuurhistorische waarde van gebouw en omgeving en met dat van technologiespecialisten die zich concentreren op materialen (en hun schade, duurzaamheid en energietransitie. Dit leidde tot de drie leerstoelgebieden Design, Cultural Value en Technology en de huidige naam voor deze masteropleiding: Heritage & Architecture. In een gelijkbenige ‘leerstoeldriehoek’ werd de versmelting verbeeld.

  10. Design and Promotion Strategy of Marketing Platform of Aquatic Auction based on Internet

    Science.gov (United States)

    Peng, Jianliang

    For the online trade and promotion of aquatic products and related materials through the network between supply and demand, the design content and effective promotional strategies of aquatic auctions online marketing platform is proposed in this paper. Design elements involve the location of customer service, the basic function of the platform including the purchase of general orders, online auctions, information dissemination, and recommendation of fine products, human services, and payment preferences. Based on network and mobile e-commerce transaction support, the auction platform makes the transaction of aquatic products well in advance. The results are important practical value for the design and application of online marketing platform of aquatic auction.

  11. Design and Printing Strategies in 3D Bioprinting of Cell-Hydrogels: A Review.

    Science.gov (United States)

    Lee, Jia Min; Yeong, Wai Yee

    2016-11-01

    Bioprinting is an emerging technology that allows the assembling of both living and non-living biological materials into an ideal complex layout for further tissue maturation. Bioprinting aims to produce engineered tissue or organ in a mechanized, organized, and optimized manner. Various biomaterials and techniques have been utilized to bioprint biological constructs in different shapes, sizes and resolutions. There is a need to systematically discuss and analyze the reported strategies employed to fabricate these constructs. We identified and discussed important design factors in bioprinting, namely shape and resolution, material heterogeneity, and cellular-material remodeling dynamism. Each design factors are represented by the corresponding process capabilities and printing parameters. The process-design map will inspire future biomaterials research in these aspects. Design considerations such as data processing, bio-ink formulation and process selection are discussed. Various printing and crosslinking strategies, with relevant applications, are also systematically reviewed. We categorized them into 5 general bioprinting strategies, including direct bioprinting, in-process crosslinking, post-process crosslinking, indirect bioprinting and hybrid bioprinting. The opportunities and outlook in 3D bioprinting are highlighted. This review article will serve as a framework to advance computer-aided design in bioprinting technologies. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Design of intelligent comfort control system with human learning and minimum power control strategies

    International Nuclear Information System (INIS)

    Liang, J.; Du, R.

    2008-01-01

    This paper presents the design of an intelligent comfort control system by combining the human learning and minimum power control strategies for the heating, ventilating and air conditioning (HVAC) system. In the system, the predicted mean vote (PMV) is adopted as the control objective to improve indoor comfort level by considering six comfort related variables, whilst a direct neural network controller is designed to overcome the nonlinear feature of the PMV calculation for better performance. To achieve the highest comfort level for the specific user, a human learning strategy is designed to tune the user's comfort zone, and then, a VAV and minimum power control strategy is proposed to minimize the energy consumption further. In order to validate the system design, a series of computer simulations are performed based on a derived HVAC and thermal space model. The simulation results confirm the design of the intelligent comfort control system. In comparison to the conventional temperature controller, this system can provide a higher comfort level and better system performance, so it has great potential for HVAC applications in the future

  13. Design for a Crane Metallic Structure Based on Imperialist Competitive Algorithm and Inverse Reliability Strategy

    Science.gov (United States)

    Fan, Xiao-Ning; Zhi, Bo

    2017-07-01

    Uncertainties in parameters such as materials, loading, and geometry are inevitable in designing metallic structures for cranes. When considering these uncertainty factors, reliability-based design optimization (RBDO) offers a more reasonable design approach. However, existing RBDO methods for crane metallic structures are prone to low convergence speed and high computational cost. A unilevel RBDO method, combining a discrete imperialist competitive algorithm with an inverse reliability strategy based on the performance measure approach, is developed. Application of the imperialist competitive algorithm at the optimization level significantly improves the convergence speed of this RBDO method. At the reliability analysis level, the inverse reliability strategy is used to determine the feasibility of each probabilistic constraint at each design point by calculating its α-percentile performance, thereby avoiding convergence failure, calculation error, and disproportionate computational effort encountered using conventional moment and simulation methods. Application of the RBDO method to an actual crane structure shows that the developed RBDO realizes a design with the best tradeoff between economy and safety together with about one-third of the convergence speed and the computational cost of the existing method. This paper provides a scientific and effective design approach for the design of metallic structures of cranes.

  14. Designing, implementing and monitoring social impact mitigation strategies: Lessons from Forest Industry Structural Adjustment Packages

    International Nuclear Information System (INIS)

    Loxton, Edwina A.; Schirmer, Jacki; Kanowski, Peter

    2013-01-01

    Social impact mitigation strategies are implemented by the proponents of policies and projects with the intent of reducing the negative, and increasing the positive social impacts of their activities, and facilitating the achievement of policy/project goals. Evaluation of mitigation strategies is critical to improving their future success and cost-effectiveness. This paper evaluates two Forest Industry Structural Adjustment Packages (FISAP) implemented in Australia in the 1990s to 2000s as part of broader policy changes that reduced access to timber from publicly owned native forests. It assesses the effectiveness of the structure, design, implementation and monitoring of the FISAPs, and highlights the interactions between these four elements and their influence on social impacts. The two FISAPs were found to be effective in terms of reducing negative impacts, encouraging positive impacts and contributing towards policy goals, although they did not mitigate negative impacts in all cases, and sometimes interacted with external factors and additional policy changes to contribute to significant short and long term negative impacts. -- Highlights: ► Mitigation strategies aim to reduce negative and enhance positive social impacts ► Mitigation strategy design, implementation, and monitoring are critical to success ► Effective mitigation enhanced the capacity of recipients to respond to change ► Mitigation strategies influenced multiple interacting positive and negative impacts ► Success required good communication, transparency, support, resources and timing

  15. Process of nourishment staggered for elimination of nitrogen. Specific characteristics of the process. Strategies of control; Proceso de alimentacion escalonada para eliminacion de nitrogeno. Caracteristicas especificas del proceso. Estrategias de control

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigo, J. C.; Cortacans, J. A. [Infilco Espanola, s.a (Spain)

    2002-07-01

    This article illustrates the step fed activated sludge process advantages for biological nitrogen removal. This configuration, also known as ALP-HA (alternative phase step feed) process, reduces biological reactor volume, avoids internal sludge recycling and optimizes organic matter consumption for denitrification. Besides, it is offered the possibility to work with a calibrated specific model as a tool for the evaluation, design and operation of the process. To end up, some efficient operation strategies for the three-step ALPHA process in denitrification-nitrification reactors are proposed. (Author) 13 refs.

  16. Assessment of value-impact associated with the elimination of postulated pipe ruptures from the design basis for nuclear power plants

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1985-01-01

    The US Nuclear Regulatory Commission is proposing to amend the regulations that currently require that the design basis for nuclear power plants include the postulation of dynamic effects from loss of coolant accidents up to and including the double-ended rupture of the largest pipe in the reactor coolant system. Proposed modifications would allow analyses to serve as a sufficient basis for excluding dynamic effects, including but not necessarily limited to pipe whip and jet impingement, associated with specific pipe ruptures. Only dynamic effects would be impacted; current design requirements for containment sizing and discharge capacity of emergency core cooling systems would remain unchanged. This report presents a detailed analysis of value-impact associated with the proposed amendment for PWR reactor coolant loop piping and for BWR recirculation loop piping. The effect of extending application of the proposed rule change to other piping systems is also assessed in a less quantitative manner

  17. Understanding HIV infection for the design of a therapeutic vaccine. Part II: Vaccination strategies for HIV.

    Science.gov (United States)

    de Goede, A L; Vulto, A G; Osterhaus, A D M E; Gruters, R A

    2015-05-01

    HIV infection leads to a gradual loss CD4(+) T lymphocytes comprising immune competence and progression to AIDS. Effective treatment with combined antiretroviral drugs (cART) decreases viral load below detectable levels but is not able to eliminate the virus from the body. The success of cART is frustrated by the requirement of expensive lifelong adherence, accumulating drug toxicities and chronic immune activation resulting in increased risk of several non-AIDS disorders, even when viral replication is suppressed. Therefore, there is a strong need for therapeutic strategies as an alternative to cART. Immunotherapy, or therapeutic vaccination, aims to increase existing immune responses against HIV or induce de novo immune responses. These immune responses should provide a functional cure by controlling viral replication and preventing disease progression in the absence of cART. The key difficulty in the development of an HIV vaccine is our ignorance of the immune responses that control of viral replication, and thus how these responses can be elicited and how they can be monitored. Part one of this review provides an extensive overview of the (patho-) physiology of HIV infection. It describes the structure and replication cycle of HIV, the epidemiology and pathogenesis of HIV infection and the innate and adaptive immune responses against HIV. Part two of this review discusses therapeutic options for HIV. Prevention modalities and antiretroviral therapy are briefly touched upon, after which an extensive overview on vaccination strategies for HIV is provided, including the choice of immunogens and delivery strategies. Copyright © 2014. Published by Elsevier Masson SAS.

  18. Performance Assessment Strategies: A computational framework for conceptual design of large roofs

    Directory of Open Access Journals (Sweden)

    Michela Turrin

    2014-01-01

    Full Text Available Using engineering performance evaluations to explore design alternatives during the conceptual phase of architectural design helps to understand the relationships between form and performance; and is crucial for developing well-performing final designs. Computer aided conceptual design has the potential to aid the design team in discovering and highlighting these relationships; especially by means of procedural and parametric geometry to support the generation of geometric design, and building performance simulation tools to support performance assessments. However, current tools and methods for computer aided conceptual design in architecture do not explicitly reveal nor allow for backtracking the relationships between performance and geometry of the design. They currently support post-engineering, rather than the early design decisions and the design exploration process. Focusing on large roofs, this research aims at developing a computational design approach to support designers in performance driven explorations. The approach is meant to facilitate the multidisciplinary integration and the learning process of the designer; and not to constrain the process in precompiled procedures or in hard engineering formulations, nor to automatize it by delegating the design creativity to computational procedures. PAS (Performance Assessment Strategies as a method is the main output of the research. It consists of a framework including guidelines and an extensible library of procedures for parametric modelling. It is structured on three parts. Pre-PAS provides guidelines for a design strategy-definition, toward the parameterization process. Model-PAS provides guidelines, procedures and scripts for building the parametric models. Explore-PAS supports the solutions-assessment based on numeric evaluations and performance simulations, until the identification of a suitable design solution. PAS has been developed based on action research. Several case studies

  19. Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review.

    Science.gov (United States)

    Mazzucca, Stephanie; Tabak, Rachel G; Pilar, Meagan; Ramsey, Alex T; Baumann, Ana A; Kryzer, Emily; Lewis, Ericka M; Padek, Margaret; Powell, Byron J; Brownson, Ross C

    2018-01-01

    The need for optimal study designs in dissemination and implementation (D&I) research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions. We reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention); had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized); design type [e.g., cluster randomized controlled trial (RCT)]; data type (e.g., quantitative); D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion. Of the 404 protocols reviewed, 212 (52%) studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge) increased over time. Fewer studies were quasi-experimental (17%) or observational (6%). Many study design categories (e.g., controlled pre-post, matched pair cluster design) were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%), with the remaining 39% proposing only quantitative. Half of protocols (52%) reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE-AIM ( n  = 16 each), followed by

  20. Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review

    Directory of Open Access Journals (Sweden)

    Stephanie Mazzucca

    2018-02-01

    Full Text Available BackgroundThe need for optimal study designs in dissemination and implementation (D&I research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions.MethodsWe reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention; had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized; design type [e.g., cluster randomized controlled trial (RCT]; data type (e.g., quantitative; D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion.ResultsOf the 404 protocols reviewed, 212 (52% studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge increased over time. Fewer studies were quasi-experimental (17% or observational (6%. Many study design categories (e.g., controlled pre–post, matched pair cluster design were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%, with the remaining 39% proposing only quantitative. Half of protocols (52% reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE

  1. Design of driving control strategy of torque distribution for two - wheel independent drive electric vehicle

    Science.gov (United States)

    Zhang, Chuanwei; Zhang, Dongsheng; Wen, Jianping

    2018-02-01

    In order to coordinately control the torque distribution of existing two-wheel independent drive electric vehicle, and improve the energy efficiency and control stability of the whole vehicle, the control strategies based on fuzzy control were designed which adopt the direct yaw moment control as the main line. For realizing the torque coordination simulation of the two-wheel independent drive vehicle, the vehicle model, motor model and tire model were built, including the vehicle 7 - DOF dynamics model, motion equation, torque equation. Finally, in the Carsim - Simulink joint simulation platform, the feasibility of the drive control strategy was verified.

  2. Energy efficiency design strategies for buildings with grid-connected photovoltaic systems

    Science.gov (United States)

    Yimprayoon, Chanikarn

    The building sector in the United States represents more than 40% of the nation's energy consumption. Energy efficiency design strategies and renewable energy are keys to reduce building energy demand. Grid-connected photovoltaic (PV) systems installed on buildings have been the fastest growing market in the PV industry. This growth poses challenges for buildings qualified to serve in this market sector. Electricity produced from solar energy is intermittent. Matching building electricity demand with PV output can increase PV system efficiency. Through experimental methods and case studies, computer simulations were used to investigate the priorities of energy efficiency design strategies that decreased electricity demand while producing load profiles matching with unique output profiles from PV. Three building types (residential, commercial, and industrial) of varying sizes and use patterns located in 16 climate zones were modeled according to ASHRAE 90.1 requirements. Buildings were analyzed individually and as a group. Complying with ASHRAE energy standards can reduce annual electricity consumption at least 13%. With energy efficiency design strategies, the reduction could reach up to 65%, making it possible for PV systems to meet reduced demands in residential and industrial buildings. The peak electricity demand reduction could be up to 71% with integration of strategies and PV. Reducing lighting power density was the best single strategy with high overall performances. Combined strategies such as zero energy building are also recommended. Electricity consumption reductions are the sum of the reductions from strategies and PV output. However, peak electricity reductions were less than their sum because they reduced peak at different times. The potential of grid stress reduction is significant. Investment incentives from government and utilities are necessary. The PV system sizes on net metering interconnection should not be limited by legislation existing in

  3. The design and analysis of a teaching and learning strategy in Biophysics Course

    Directory of Open Access Journals (Sweden)

    Beatriz Aiziczon

    2010-01-01

    Full Text Available This work presents the design and analysis of a teaching and learning strategy of Biophysics in the Medical career, in the mark of the Ausubelian Significant Learning Model, to overtake the Model of Transmission-Reception of knowledge. It is an integrative Module constructed from our previous theoretical Model and based on the authors' previous works (AIZICZON; CUDMANI, 2004, 2005, 2007. We analyze applications of conceptual maps strategy and the previous organizing in Medical Education (AUSUBEL, 1981; MOREIRA, 1983, 1999 promoting the integration of concepts allowing the progressive differentiation and the integrative reorganization as well as the formative evaluation. In this work we analyze the experience with teachers.

  4. Strategy paper. Remedial design/remedial action 100 Area. Revision 2

    International Nuclear Information System (INIS)

    Donahoe, R.L.

    1995-10-01

    This strategy paper identifies and defines the approach for remedial design and remedial action (RD/RA) for source waste sites in the 100 Area of the Hanford Site, located in southeastern Washington State. This paper provides the basis for the US Department of Energy (DOE) to assess and approve the Environmental Restoration Contractor's (ERC) approach to RD/RA. Additionally, DOE is requesting review/agreement from the US Environmental Protection Agency (EPA) and Washington State Department of Ecology (Ecology) on the strategy presented in this document in order to expedite remedial activities

  5. A Review of Different Behavior Modification Strategies Designed to Reduce Sedentary Screen Behaviors in Children

    Directory of Open Access Journals (Sweden)

    Jeremy A. Steeves

    2012-01-01

    Full Text Available Previous research suggests that reducing sedentary screen behaviors may be a strategy for preventing and treating obesity in children. This systematic review describes strategies used in interventions designed to either solely target sedentary screen behaviors or multiple health behaviors, including sedentary screen behaviors. Eighteen studies were included in this paper; eight targeting sedentary screen behaviors only, and ten targeting multiple health behaviors. All studies used behavior modification strategies for reducing sedentary screen behaviors in children (aged 1–12 years. Nine studies only used behavior modification strategies, and nine studies supplemented behavior modification strategies with an electronic device to enhance sedentary screen behaviors reductions. Many interventions (50% significantly reduced sedentary screen behaviors; however the magnitude of the significant reductions varied greatly (−0.44 to −3.1 h/day and may have been influenced by the primary focus of the intervention, number of behavior modification strategies used, and other tools used to limit sedentary screen behaviors.

  6. Assessment of Passive vs. Active Strategies for a School Building Design

    Directory of Open Access Journals (Sweden)

    Ji Eun Kang

    2015-11-01

    Full Text Available This paper presents a simulation study to reduce heating and cooling energy demand of a school building in Seoul Metropolitan Area, Korea. The aim of this study was to estimate the impact of passive vs. active approaches on energy savings in buildings using EnergyPlus simulation. By controlling lighting, the energy saving of the original school building design was found most significant, and increased by 32% when the design was improved. It is noteworthy that energy saving potential of each room varies significantly depending on the rooms’ thermal characteristics and orientation. Thus, the analysis of energy saving should be introduced at the individual space level, not at the whole building level. Additionally, the simulation studies should be involved for rational decision-making. Finally, it was concluded that priority should be given to passive building design strategies, such as building orientation, as well as control and utilization of solar radiation. These passive energy saving strategies are related to urban, architectural design, and engineering issues, and are more beneficial in terms of energy savings than active strategies.

  7. Gathering Requirements for Teacher Tools: Strategies for Empowering Teachers Through Co-Design

    Science.gov (United States)

    Matuk, Camillia; Gerard, Libby; Lim-Breitbart, Jonathan; Linn, Marcia

    2016-02-01

    Technology can enhance teachers' practice in multiple ways. It can help them better understand patterns in their students' thinking, manage class progress at individual and group levels, and obtain evidence to inform modifications to curriculum and instruction. Such technology is most effective when it is aligned with teachers' goals and expectations. Participatory methods, which involve teachers closely in the design process, are widely recommended for establishing accurate design requirements that address users' needs. By collaborating with researchers, teachers can contribute their professional expertise to shape the tools of their practice, and ultimately ensure their sustained use. However, there is little guidance available for maintaining effective teacher-researcher design partnerships. We describe four strategies for engaging teachers in designing tools intended to support and enhance their practice within a web-based science learning environment: discussing physical artifacts, reacting to scenarios, customizing prototypes, and writing user stories. Using design artifacts and documents of teachers' reflections, we illustrate how we applied these techniques over 5 years of annual professional development workshops, and examine their affordances for eliciting teachers' ideas. We reflect on how these approaches have helped inform technology refinements and innovations. We moreover discuss the further benefits these strategies have had in encouraging teachers to reflect on their own practice and on the roles of technology in supporting it; and in allowing researchers to gain a deeper understanding of the relationship between technology, teaching, and design.

  8. Risks: diagnosing and eliminating

    Directory of Open Access Journals (Sweden)

    Yuriy A. Tikhomirov

    2016-01-01

    Full Text Available Objective to develop conceptual theoretical and legal provisions and scientific recommendations on the identification analysis and elimination of risk. Methods universal dialectic method of cognition as well as scientific and private research methods based on it. Results the system was researched of risks diagnostics in the legal sphere and mechanism of influencing the quotrisk situationsquot and their consequences damage to the environment and harm to society. The concept of risk in the legal sphere was formulated the author39s classification of risks in the legal sphere is presented. The rules of analysis evaluation and prevention of risks and the model risk management framework are elaborated. Scientific novelty the mechanism for the identification analysis and elimination of risk has been developed and introduced into scientific circulation the author has proposed the classification and types of risks the reasons and the conditions promoting the risk occurrence. Practical significance the provisions and conclusions of the article can be used in the scientific lawmaking and lawenforcement activity as well as in the educational process of higher educational establishments. nbsp

  9. Working Inside for Smoking Elimination (Project W.I.S.E. study design and rationale to prevent return to smoking after release from a smoke free prison

    Directory of Open Access Journals (Sweden)

    Mello Jennifer

    2011-10-01

    Full Text Available Abstract Background Incarcerated individuals suffer disproportionately from the health effects of tobacco smoking due to the high smoking prevalence in this population. In addition there is an over-representation of ethnic and racial minorities, impoverished individuals, and those with mental health and drug addictions in prisons. Increasingly, prisons across the U.S. are becoming smoke free. However, relapse to smoking is common upon release from prison, approaching 90% within a few weeks. No evidence based treatments currently exist to assist individuals to remain abstinent after a period of prolonged, forced abstinence. Methods/Design This paper describes the design and rationale of a randomized clinical trial to enhance smoking abstinence rates among individuals following release from a tobacco free prison. The intervention is six weekly sessions of motivational interviewing and cognitive behavioral therapy initiated approximately six weeks prior to release from prison. The control group views six time matched videos weekly starting about six weeks prior to release. Assessments take place in-person 3 weeks after release and then for non-smokers every 3 months up to 12 months. Smoking status is confirmed by urine cotinine. Discussion Effective interventions are greatly needed to assist these individuals to remain smoke free and reduce health disparities among this socially and economically challenged group. Trial Registration NCT01122589

  10. Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

    Science.gov (United States)

    Milana; Khan, M. K.; Munive, J. E.

    2014-07-01

    The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective.

  11. Development the conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation

    International Nuclear Information System (INIS)

    Milana; Khan, M K; Munive, J E

    2014-01-01

    The importance of maintenance has escalated significantly by the increasing of automation in manufacturing process. This condition switches traditional maintenance perspective of inevitable cost into the business competitive driver. Consequently, maintenance strategy and operation decision needs to be synchronized to business and manufacturing concerns. This paper shows the development of conceptual design of Knowledge Based System for Integrated Maintenance Strategy and Operation (KBIMSO). The framework of KBIMSO is elaborated to show the process of how the KBIMSO works to reach the maintenance decision. By considering the multi-criteria of maintenance decision making, the KB system embedded with GAP and AHP to support integrated maintenance strategy and operation which is novel in this area. The KBIMSO is useful to review the existing maintenance system and give reasonable recommendation of maintenance decisions in respect to business and manufacturing perspective

  12. Evolutionary optimization and game strategies for advanced multi-disciplinary design applications to aeronautics and UAV design

    CERN Document Server

    Periaux, Jacques; Lee, Dong Seop Chris

    2015-01-01

    Many complex aeronautical design problems can be formulated with efficient multi-objective evolutionary optimization methods and game strategies. This book describes the role of advanced innovative evolution tools in the solution, or the set of solutions of single or multi disciplinary optimization. These tools use the concept of multi-population, asynchronous parallelization and hierarchical topology which allows different models including precise, intermediate and approximate models with each node belonging to the different hierarchical layer handled by a different Evolutionary Algorithm. The efficiency of evolutionary algorithms for both single and multi-objective optimization problems are significantly improved by the coupling of EAs with games and in particular by a new dynamic methodology named “Hybridized Nash-Pareto games”. Multi objective Optimization techniques and robust design problems taking into account uncertainties are introduced and explained in detail. Several applications dealing with c...

  13. Ten years left to eliminate blinding trachoma

    Directory of Open Access Journals (Sweden)

    Haddad D.

    2010-09-01

    Full Text Available n 1997, the World Health Organization formed the Global Alliance to Eliminate Blinding Trachoma by 2020 (GET 2020, a coalition of governmental, non-governmental, research, and pharmaceutical partners. In 1998, the World Health Assembly urged member states to map blinding trachoma in endemic areas, implement the SAFE strategy (which stands for surgery for trichiasis, antibiotics, facial-cleanliness and environmental change, such as clean water and latrines and collaborate with the global alliance in its work to eliminate blinding trachoma.

  14. Taking the stairs instead: The impact of workplace design standards on health promotion strategies

    Directory of Open Access Journals (Sweden)

    Marian Tye

    2013-01-01

    Full Text Available AbstractBackground Comprehensive health promotion in Western Australia has been conducted from the point of views of policy development, promotion, education and service delivery. Much of this recent work has been focused on supporting workplaces – but there has yet to be any real focus on the design of the actual physical workplace environment from a health promotion perspective. Aims This paper is aimed at highlighting the gap in health promotion knowledge by addressing how the disciplines of architecture and health promotion can work together to challenge the regulations that dictate design practice and ultimately bridge that gap for long-term change. The overarching aim is to undertake further evidenced-based research that will inform best practice in the planning and design of workplaces to reduce sedentary behaviour and increase opportunities for physical activity. Method Within this wide objective this paper focuses in particular on the idea of stairs-versus-lift movement strategies within office buildings. By examining building design guidelines from a health promotion perspective we expose a central dichotomy, where health promotion posters say “Take the stairs instead” whereas the language of building design suggests that the lift is best. Results From a design point of view, the National Codes of Construction (NCC, formally known as the Building Codes of Australia (BCA, the essential technical regulation for all building design and construction, primarily addresses the concepts of ‘egress’ and ‘travel distance’ for escape in the event of fire, and building access in terms of universal access. Additionally, The Property Council of Australia’s Guide to Office Building Quality prioritises lift performance criteria along with the quality and experience of lift use as a major grading factor. There is no provision in either set of standards for staircase quality and experience. Conclusion The stairs, despite being promoted

  15. High-Payoff Space Transportation Design Approach with a Technology Integration Strategy

    Science.gov (United States)

    McCleskey, C. M.; Rhodes, R. E.; Chen, T.; Robinson, J.

    2011-01-01

    A general architectural design sequence is described to create a highly efficient, operable, and supportable design that achieves an affordable, repeatable, and sustainable transportation function. The paper covers the following aspects of this approach in more detail: (1) vehicle architectural concept considerations (including important strategies for greater reusability); (2) vehicle element propulsion system packaging considerations; (3) vehicle element functional definition; (4) external ground servicing and access considerations; and, (5) simplified guidance, navigation, flight control and avionics communications considerations. Additionally, a technology integration strategy is forwarded that includes: (a) ground and flight test prior to production commitments; (b) parallel stage propellant storage, such as concentric-nested tanks; (c) high thrust, LOX-rich, LOX-cooled first stage earth-to-orbit main engine; (d) non-toxic, day-of-launch-loaded propellants for upper stages and in-space propulsion; (e) electric propulsion and aero stage control.

  16. Strategies of Energy Efficiency Design in Traditional Kangbaiwan Mansion in China

    Directory of Open Access Journals (Sweden)

    Song Xiaoqing

    2016-01-01

    Full Text Available The building sector is one of the highest energy consuming sectors in the world as well as in China, it is urgent to seek an energy efficiency way of sustainable architecture development. From the perspective of tradition, this paper focus on strategies of energy efficiency design that contained in excellent vernacular dwellings. On the basis of analyzing an example of Kangbaiwan Mansion, it illustrates the advantage of environment ecosystem, and summarizes the physical and cultural characteristic of its buildings, especially the climate-adapting overall arrangement and sustainable strategies of natural ventilation and passive solar gain, which can be a fertile source of modern energy efficiency architecture design as well as a proper way of inheriting the outstanding traditional culture.

  17. A Strategy for Material-specific e-Textile Interaction Design

    DEFF Research Database (Denmark)

    Gowrishankar, Ramyah; Bredies, Katharina; Ylirisku, Salu

    2017-01-01

    The interaction design of e-Textile products are often characterized by conventions adopted from electronic devices rather than developing interactions that can be specific to e-Textiles. We argue that textile materials feature a vast potential for the design of novel digital interactions....... Especially the shape-reformation capabilities of textiles may inform the design of expressive and aesthetically rewarding applications. In this chapter, we propose ways in which the textileness of e-Textiles can be better harnessed. We outline an e-Textile Interaction Design strategy that is based...... on defining the material-specificity of e-Textiles as its ability to deform in ways that match the expectations we have of textile materials. It embraces an open-ended exploration of textile-related interactions (for e.g. stretching, folding, turning-inside-out etc.) and their potential for electronic...

  18. Simulation based design strategy for EMC compliance of components in hybrid vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Maass, Uwe; Ndip, Ivan; Hoene, Eckard; Guttowski, Stephan [Fraunhofer-Institut fuer Zuverlaessigkeit und Mikrointegration (IZM), Berlin (Germany); Tschoban, Christian; Lang, Klaus-Dieter [Technische Univ. Berlin (Germany)

    2012-11-01

    The design of components for the power train of hybrid vehicles needs to take into account EMC compliance standards related to hazardous electromagnetic fields. Using a simulation based design strategy allows for virtual EMC tests in parallel to the mechanical / electrical power design and thus reduces (re-)design time and costs. Taking as an example a high-voltage battery for a hybrid vehicle the emitted magnetic fields outside the battery are examined. The simulation stategy is based on 3D EM simulations using a full-wave and an eddy current solver. The simulation models are based on the actual CAD data from the mechanical construction resulting in and a high geometrical aspect ratio. The impact of simulation specific aspects such as boundary conditions and excitation is given. It was found that using field simulations it is possible to identify noise sources and coupling paths as well as aid the construction of the battery. (orig.)

  19. Institutional capacity for designing and implementing agricultural and rural development policies and strategies in Nigeria:

    OpenAIRE

    Adebayo, Kolawole; Babu, Suresh Chandra; Rhoe, Valerie

    2009-01-01

    This study assessed the capacity for designing and implementing agricultural and rural development policies, strategies, and programs in Nigeria. Data for this study were derived from initial consultations at the Federal Ministry of Agriculture and Water Resources (FMAWR), Federal Ministry of Women affairs and Social Development (FMWASD), and the Federal Ministry of Environment (FMEnv) early in 2008. Two consultation workshops were also held, one for relevant staff in the ministries, parastat...

  20. Design a Smart Control Strategy to Implement an Intelligent Energy Safety and Management System

    OpenAIRE

    Jing-Min Wang; Ming-Ta Yang

    2014-01-01

    The energy saving and electricity safety are today a cause for increasing concern for homes and buildings. Integrating the radio frequency identification (RFID) and ZigBee wireless sensor network (WSN) mature technologies, the paper designs a smart control strategy to implement an intelligent energy safety and management system (IESMS) which performs energy measuring, controlling, monitoring, and saving of the power outlet system. The presented RFID and billing module is used to identify user...

  1. Designing a community engagement strategy for Limerick Smarter travel using focus groups and precedent studies

    OpenAIRE

    Cullinane, Kathleen Clair

    2012-01-01

    peer-reviewed This research aims to create a rational basis for designing and implementing a plan for Limerick Smarter Travel. This plan will pay particular attention to community engagement. This research establishes a rationale for a community engagement strategy. Precedent studies also provide direct guidance for this rationale. The objective of the plan is to develop a local culture of Smarter Travel in Limerick communities using best international practice, and thereby achieving behav...

  2. Development strategy and process models for phased automation of design and digital manufacturing electronics

    Science.gov (United States)

    Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

    2018-03-01

    The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

  3. Robust Control Mixer Method for Reconfigurable Control Design Using Model Matching Strategy

    DEFF Research Database (Denmark)

    Yang, Zhenyu; Blanke, Mogens; Verhagen, Michel

    2007-01-01

    A novel control mixer method for recon¯gurable control designs is developed. The proposed method extends the matrix-form of the conventional control mixer concept into a LTI dynamic system-form. The H_inf control technique is employed for these dynamic module designs after an augmented control...... system is constructed through a model-matching strategy. The stability, performance and robustness of the reconfigured system can be guaranteed when some conditions are satisfied. To illustrate the effectiveness of the proposed method, a robot system subjected to failures is used to demonstrate...

  4. An integral design strategy combining optical system and image processing to obtain high resolution images

    Science.gov (United States)

    Wang, Jiaoyang; Wang, Lin; Yang, Ying; Gong, Rui; Shao, Xiaopeng; Liang, Chao; Xu, Jun

    2016-05-01

    In this paper, an integral design that combines optical system with image processing is introduced to obtain high resolution images, and the performance is evaluated and demonstrated. Traditional imaging methods often separate the two technical procedures of optical system design and imaging processing, resulting in the failures in efficient cooperation between the optical and digital elements. Therefore, an innovative approach is presented to combine the merit function during optical design together with the constraint conditions of image processing algorithms. Specifically, an optical imaging system with low resolution is designed to collect the image signals which are indispensable for imaging processing, while the ultimate goal is to obtain high resolution images from the final system. In order to optimize the global performance, the optimization function of ZEMAX software is utilized and the number of optimization cycles is controlled. Then Wiener filter algorithm is adopted to process the image simulation and mean squared error (MSE) is taken as evaluation criterion. The results show that, although the optical figures of merit for the optical imaging systems is not the best, it can provide image signals that are more suitable for image processing. In conclusion. The integral design of optical system and image processing can search out the overall optimal solution which is missed by the traditional design methods. Especially, when designing some complex optical system, this integral design strategy has obvious advantages to simplify structure and reduce cost, as well as to gain high resolution images simultaneously, which has a promising perspective of industrial application.

  5. Optimal Sizing and Control Strategy Design for Heavy Hybrid Electric Truck

    Directory of Open Access Journals (Sweden)

    Yuan Zou

    2012-01-01

    Full Text Available Due to the complexity of the hybrid powertrain, the control is highly involved to improve the collaborations of the different components. For the specific powertrain, the components' sizing just gives the possibility to propel the vehicle and the control will realize the function of the propulsion. Definitely the components' sizing also gives the constraints to the control design, which cause a close coupling between the sizing and control strategy design. This paper presents a parametric study focused on sizing of the powertrain components and optimization of the power split between the engine and electric motor for minimizing the fuel consumption. A framework is put forward to accomplish the optimal sizing and control design for a heavy parallel pre-AMT hybrid truck under the natural driving schedule. The iterative plant-controller combined optimization methodology is adopted to optimize the key parameters of the plant and control strategy simultaneously. A scalable powertrain model based on a bilevel optimization framework is built. Dynamic programming is applied to find the optimal control in the inner loop with a prescribed cycle. The parameters are optimized in the outer loop. The results are analysed and the optimal sizing and control strategy are achieved simultaneously.

  6. An Exploratory Study of Self-Regulated Learning Strategies in a Design Project by Students in Grades 9-12

    Science.gov (United States)

    Lawanto, Oenardi; Butler, Deborah; Cartier, Sylvie; Santoso, Harry; Lawanto, Kevin; Clark, David

    2013-01-01

    This exploratory study evaluated self-regulated learning (SRL) strategies of 27 students in grades 9-12 during an engineering design project. The specific focus of the study was on student task interpretation and its relation to planning and cognitive strategies in design activities. Two research questions guided the study: (1) To what degree was…

  7. Seasonal blood shortages can be eliminated.

    Science.gov (United States)

    Gilcher, Ronald O; McCombs, Suzanne

    2005-11-01

    This review is designed to help readers understand seasonal blood shortages and provide solutions through the use of technology that can increase the number of red blood cell units collected and the use of recruitment and marketing initiatives that appeal to the increasingly diverse donor base. Seasonal shortages are, in reality, mostly shortages of group O red blood cells and occur most commonly during midsummer and early winter. The shortages occur primarily from increased use of group O red blood cells at times of decreased donor availability. While reducing the disproportionate use of red cells will help, blood centers can more quickly reduce the seasonal deficits by using automated red cell technology to collect double red blood cell units; targeted marketing programs to provide effective messages; seasonal advertising campaigns; and recognition, benefits, and incentives to enhance the donor motivation donation threshold. A multi-level approach to increasing blood donations at difficult times of the year can ensure that donations are increased at a time when regular donor availability is decreased. Seasonal blood shortages can be eliminated by understanding the nature of the shortages, why and when they occur, and using more sophisticated recruitment and marketing strategies as well as automated collection technologies to enhance the blood supply.

  8. Lifetime design strategy for binary geothermal plants considering degradation of geothermal resource productivity

    International Nuclear Information System (INIS)

    Budisulistyo, Denny; Wong, Choon Seng; Krumdieck, Susan

    2017-01-01

    Highlights: • A new lifetime strategy for binary plants considering thermal resource degradations. • The net present value and energy return on investment are selected as indicators. • The results indicate that the design based on point 2 has the best revenue. • Improving plant performance by parameters adjustments and adaptable designs. - Abstract: This work proposes a lifetime design strategy for binary geothermal plants which takes into account heat resource degradation. A model of the resource temperature and mass flow rate decline over a 30 year plant life is developed from a survey of data. The standard approach to optimise a basic subcritical cycle of n-pentane working fluid and select component sizes is used for the resource characteristics in years 1, 7, 15 and 30. The performances of the four plants designed for the different resource conditions are then simulated over the plant life to obtain the best lifetime design. The net present value and energy return on investment are selected as the measures of merit. The production history of a real geothermal well in the Taupo Volcanic Zone, New Zealand, is used as a case study for the lifetime design strategy. The results indicate that the operational parameters (such as mass flow rate of n-pentane, inlet turbine pressure and air mass flow rate) and plant performance (net power output) decrease over the whole plant life. The best lifetime plant design was at year 7 with partly degraded conditions. This condition has the highest net present value at USD 6,894,615 and energy return on investment at 4.15. Detailed thermo-economic analysis was carried out with the aim of improving the plant performance to overcome the resource degradation in two ways: operational parameters adjustments and adaptable designs. The results shows that mass flow rates of n-pentane and air cooling should be adjusted to maintain the performance over the plant life. The plant design can also be adapted by installing a recuperator

  9. Optimization strategies for cask design and container loading in long term spent fuel storage

    International Nuclear Information System (INIS)

    2006-12-01

    As delays are incurred in implementing reprocessing and in planning for geologic repositories, storage of increasing quantities of spent fuel for extended durations is becoming a growing reality. Accordingly, effective management of spent fuel continues to be a priority topic. In response, the IAEA has organized a series of meetings to identify cask loading optimisation issues in preparation for a technical publication on Optimization Strategies for Cask/Container Loading in Long Term Spent Fuel Storage. This publication outlines the optimisation process for cask design, licensing and utilization, describing three principal groups of optimization activities in terms of relevant technical considerations such as criticality, shielding, structural design, operations, maintenance and retrievability. The optimization process for cask design, licensing, and utilization is outlined. The general objectives for the design of storage casks, including storage casks that are intended to be transportable, are summarized. The nature of optimization within the design process is described. The typical regulatory and licensing process is outlined, focusing on the roles of safety regulations, the regulator, and the designer/applicant in the optimization process. Based on the foregoing, a description of the three principal groups of optimization activities is provided. The subsequent chapters of this document then describe the specific optimization activities within these three activity groups, in each of the several design disciplines

  10. Eliminating US hospital medical errors.

    Science.gov (United States)

    Kumar, Sameer; Steinebach, Marc

    2008-01-01

    Healthcare costs in the USA have continued to rise steadily since the 1980s. Medical errors are one of the major causes of deaths and injuries of thousands of patients every year, contributing to soaring healthcare costs. The purpose of this study is to examine what has been done to deal with the medical-error problem in the last two decades and present a closed-loop mistake-proof operation system for surgery processes that would likely eliminate preventable medical errors. The design method used is a combination of creating a service blueprint, implementing the six sigma DMAIC cycle, developing cause-and-effect diagrams as well as devising poka-yokes in order to develop a robust surgery operation process for a typical US hospital. In the improve phase of the six sigma DMAIC cycle, a number of poka-yoke techniques are introduced to prevent typical medical errors (identified through cause-and-effect diagrams) that may occur in surgery operation processes in US hospitals. It is the authors' assertion that implementing the new service blueprint along with the poka-yokes, will likely result in the current medical error rate to significantly improve to the six-sigma level. Additionally, designing as many redundancies as possible in the delivery of care will help reduce medical errors. Primary healthcare providers should strongly consider investing in adequate doctor and nurse staffing, and improving their education related to the quality of service delivery to minimize clinical errors. This will lead to an increase in higher fixed costs, especially in the shorter time frame. This paper focuses additional attention needed to make a sound technical and business case for implementing six sigma tools to eliminate medical errors that will enable hospital managers to increase their hospital's profitability in the long run and also ensure patient safety.

  11. Effective strategy making: Co-designing scenarios as a tool for effective strategic planning

    Directory of Open Access Journals (Sweden)

    Jan Vogelij

    2015-08-01

    -producing, as making together a product and collaboration towards a strategy, defined as a common exploration of possibilities. The interactions of the participants in the strategy making process, potentially creating trust and enhancing social cohesion, may be more important than the resulting concept for a development strategy. Therefore our attention focused on the way strategies are made in the black box of specific processes. The interactions aiming at co-ownership and collaboration are central in this novel ’interactions approach’. The resulting strategy does not necessarily contain (infra structural projects; a spatial strategy concerns a selected localised policy and argumentative framework for future development. Societal relevance Being a planning consultant with over forty years of experience in practice, the author highly values practical applicability in society. Understanding of practice-related factors for effectiveness of strategy making is important because effective public management saves costs for society; a framework expressing the aimed-for direction of development provides clarity for private initiatives; an agreed strategy helps to coordinate sector policies; several EU and national subsidies for projects require a locally agreed structural frame. Because a development vision concerns the direction of an envisaged development, its effectiveness is defined in terms of performance of the argumentative framework based on the story lines developed in the discussions during the strategy making process. Our search aims at identifying recommendations for enhanced chances for performing strategies in praxis. Approach A theoretical frame was composed based on literature in the fields of planning theory, policy analysis and design. Research questions were formulated concerning the importance of the process related variables: open process management, coownership, co-design, the application of scenarios and visualizations. Concerning the importance of the place

  12. Design and control strategy for a hybrid green energy system for mobile telecommunication sites

    Science.gov (United States)

    Okundamiya, Michael S.; Emagbetere, Joy O.; Ogujor, Emmanuel A.

    2014-07-01

    The rising energy costs and carbon footprint of operating mobile telecommunication sites in the emerging world have increased research interests in green technology. The intermittent nature of most green energy sources creates the problem of designing the optimum configuration for a given location. This study presents the design analysis and control strategy for a cost effective and reliable operation of the hybrid green energy system (HGES) for GSM base transceiver station (BTS) sites in isolated regions. The design constrains the generation and distribution of power to reliably satisfy the energy demand while ensuring safe operation of the system. The overall process control applies the genetic algorithm-based technique for optimal techno-economic sizing of system's components. The process simulation utilized meteorological data for 3 locations (Abuja, Benin City and Sokoto) with varying climatic conditions in Nigeria. Simulation results presented for green GSM BTS sites are discussed and compared with existing approaches.

  13. Application of Evolution Strategies to the Design of Tracking Filters with a Large Number of Specifications

    Directory of Open Access Journals (Sweden)

    Jesús García Herrero

    2003-07-01

    Full Text Available This paper describes the application of evolution strategies to the design of interacting multiple model (IMM tracking filters in order to fulfill a large table of performance specifications. These specifications define the desired filter performance in a thorough set of selected test scenarios, for different figures of merit and input conditions, imposing hundreds of performance goals. The design problem is stated as a numeric search in the filter parameters space to attain all specifications or at least minimize, in a compromise, the excess over some specifications as much as possible, applying global optimization techniques coming from evolutionary computation field. Besides, a new methodology is proposed to integrate specifications in a fitness function able to effectively guide the search to suitable solutions. The method has been applied to the design of an IMM tracker for a real-world civil air traffic control application: the accomplishment of specifications defined for the future European ARTAS system.

  14. Formation Design Strategy for SCOPE High-Elliptic Formation Flying Mission

    Science.gov (United States)

    Tsuda, Yuichi

    2007-01-01

    The new formation design strategy using simulated annealing (SA) optimization is presented. The SA algorithm is useful to survey a whole solution space of optimum formation, taking into account realistic constraints composed of continuous and discrete functions. It is revealed that this method is not only applicable for circular orbit, but also for high-elliptic orbit formation flying. The developed algorithm is first tested with a simple cart-wheel motion example, and then applied to the formation design for SCOPE. SCOPE is the next generation geomagnetotail observation mission planned in JAXA, utilizing a formation flying techonology in a high elliptic orbit. A distinctive and useful heuristics is found by investigating SA results, showing the effectiveness of the proposed design process.

  15. An Integrated Mixed Methods Research Design: Example of the Project Foreign Language Learning Strategies and Achievement: Analysis of Strategy Clusters and Sequences

    OpenAIRE

    Vlčková Kateřina

    2014-01-01

    The presentation focused on an so called integrated mixed method research design example on a basis of a Czech Science Foundation Project Nr. GAP407/12/0432 "Foreign Language Learning Strategies and Achievement: Analysis of Strategy Clusters and Sequences". All main integrated parts of the mixed methods research design were discussed: the aim, theoretical framework, research question, methods and validity threats. Prezentace se zaměřovala na tzv. integrovaný vícemetodový výzkumný design na...

  16. IDENTIFYING PRODUCT AND PRICE STRATEGIES FOR DESIGNING TRANSACTIONAL BANKING PACKAGES ADDRESSED TO SMES (CONSIDERATIONS

    Directory of Open Access Journals (Sweden)

    Giuca Simona-Mihaela

    2014-07-01

    Full Text Available The current paper has the aim to provide guidelines for designing efficient product and price strategies, through proposed business cases which could be used especially for banking products addressed to SMEs. While identifying the optimal product and price strategy and designing the product catalogue structure, the marketing specialist should definitely consider existing portfolio behaviour and estimate the growing potential (if possible, overall portfolio, with focus on accurately defining the additional impact of the newly proposed product/ products. A business case contains estimations for results to be generated by products to be launched or optimized. This paper presents complex schemes for business case scenarios for migration of existing portfolio to the new products, but also considers new clients acquisition based on important features of the products. The pricing strategy is not a simple task to manage. Especially when speaking about transactional packages (for which the price is lower than separate services included, some segments or clusters may generate loss to the bank if they already used the services at a higher price than the one of the package. Therefore, the decision of setting up specific prices needs to be based on an accurate and complex analysis, as presented in current paper. The assumptions used in a business case need to be relevant for the entire process of designing and launching a product, therefore they can always be adjusted for better calculation of the impact. No matter if the assumptions and prices remain as in the initial proposal or not, the steps to be followed are the same. Segmentation also plays an important role in designing the product strategy, since the target for a product or product catalogue can be represented by a segment, a sub segment or a cluster of many segments. Not always the initial segmentation represents the clustering for the product strategy. Sometimes, behaviour of existing clients

  17. Design and construction strategies for reducing embodied impacts from buildings – Case study analysis

    DEFF Research Database (Denmark)

    Malmqvist, Tove; Nehasilova, Marie; Moncaster, Alice

    2018-01-01

    , individual building projects. This is done by a systematic analysis of the Annex 57 case study collection as well as additional scientific literature. While it should be noted that the actual EEG savings at building level illustrated in this collection of studies are only applicable to each specific case...... of national energy mixes. Stakeholders therefore have a growing interest in understanding the possibilities for reducing em- bodied impacts in buildings. In the IEA EBC project ‘Annex 57’ a broad call for case studies was launched with the aim to identify design strategies for reducing embodied energy and GHG...... emissions (EEG) from buildings. The aim of this paper is to identify and provide a collected and comprehensive overview of quantitative reduction potentials of the particular EEG reduction strategies which should be considered by the stakeholders engaged in, and with the capacity to influence the outcome of...

  18. Conceptual strategy for design, implementation, and validation of a biomarker-based biomonitoring capability

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, J.F.; Halbrook, R.S.; Shugart, L.R.

    1991-12-01

    This document describes a strategy for defining specific objectives for biomarker studies and for designing and implementing a biomonitoring study that focuses on these objectives. In researching this subject, it became clear to the authors that the subject of biomarkers created a great deal of interest among scientists and regulators but that general acceptance of biomarkers as a tool for environmental protection was hampered by lack of a clear notion of how to develop and apply this approach. We intend this document to be a user's guide'' that lays out a logical scheme for applying biomarkers in environmental monitoring. In addition, laboratory and field research components needed to develop and validate fundamental understanding and interpretation of biomarker responses are also described, as is a strategy for evolution of a biomarker-based biomonitoring capability. The document is divided into sections intended to lead the reader to an understanding of how biomarkers can be developed and applied.

  19. Conceptual strategy for design, implementation, and validation of a biomarker-based biomonitoring capability

    Energy Technology Data Exchange (ETDEWEB)

    McCarthy, J.F.; Halbrook, R.S.; Shugart, L.R.

    1991-12-01

    This document describes a strategy for defining specific objectives for biomarker studies and for designing and implementing a biomonitoring study that focuses on these objectives. In researching this subject, it became clear to the authors that the subject of biomarkers created a great deal of interest among scientists and regulators but that general acceptance of biomarkers as a tool for environmental protection was hampered by lack of a clear notion of how to develop and apply this approach. We intend this document to be a ``user`s guide`` that lays out a logical scheme for applying biomarkers in environmental monitoring. In addition, laboratory and field research components needed to develop and validate fundamental understanding and interpretation of biomarker responses are also described, as is a strategy for evolution of a biomarker-based biomonitoring capability. The document is divided into sections intended to lead the reader to an understanding of how biomarkers can be developed and applied.

  20. Can prevention eliminate caries?

    Science.gov (United States)

    O'Mullane, D

    1995-07-01

    There are four main factors involved in the carious process: at-risk tooth structure, plaque flora, fermentable carbohydrates, and time. Based on our knowledge of the carious process, four main preventive strategies have been developed over the years, namely, fluorides, fissure sealing, dietary choice, and plaque control. Fluorides are having a major impact on smooth-surface caries; hence, strategies combining fluorides and fissure sealing are very effective. However, use of fissure sealing is still problematic. Changing dietary practices with a view to reducing dental caries seems to be having little impact on a global scale. Plaque control, as practiced routinely by the majority of people, is not sufficient to result in caries reductions. Deprivation and poverty are strongly associated with high caries levels. Although the preventive strategies currently available are likely to result in lower caries levels for many, for logistical reasons and because of factors associated with deprivation and poverty, caries is likely to remain a major public health problem in most communities for the foreseeable future.

  1. Design of Underwater Robot Lines Based on a Hybrid Automatic Optimization Strategy

    Institute of Scientific and Technical Information of China (English)

    Wenjing Lyu; Weilin Luo

    2014-01-01

    In this paper, a hybrid automatic optimization strategy is proposed for the design of underwater robot lines. Isight is introduced as an integration platform. The construction of this platform is based on the user programming and several commercial software including UG6.0, GAMBIT2.4.6 and FLUENT12.0. An intelligent parameter optimization method, the particle swarm optimization, is incorporated into the platform. To verify the strategy proposed, a simulation is conducted on the underwater robot model 5470, which originates from the DTRC SUBOFF project. With the automatic optimization platform, the minimal resistance is taken as the optimization goal;the wet surface area as the constraint condition; the length of the fore-body, maximum body radius and after-body’s minimum radius as the design variables. With the CFD calculation, the RANS equations and the standard turbulence model are used for direct numerical simulation. By analyses of the simulation results, it is concluded that the platform is of high efficiency and feasibility. Through the platform, a variety of schemes for the design of the lines are generated and the optimal solution is achieved. The combination of the intelligent optimization algorithm and the numerical simulation ensures a global optimal solution and improves the efficiency of the searching solutions.

  2. PAT Design Strategy for Energy Recovery in Water Distribution Networks by Electrical Regulation

    Directory of Open Access Journals (Sweden)

    Helena M. Ramos

    2013-01-01

    Full Text Available In the management of water distribution networks, large energy savings can be yielded by exploiting the head drop due to the network pressure control strategy, i.e., for leak reductions. Hydropower in small streams is already exploited, but technical solutions combining efficiency and economic convenience are still required. In water distribution networks, an additional design problem comes out from the necessity of ensuring a required head drop under variable operating conditions, i.e., head and discharge variations. Both a hydraulic regulation (HR—via a series-parallel hydraulic circuit- and an electrical regulation (ER—via inverter- are feasible solutions. A design procedure for the selection of a production device in a series-parallel hydraulic circuit has been recently proposed. The procedure, named VOS (Variable Operating Strategy, is based on the overall plant efficiency criteria and is applied to a water distribution network where a PAT (pump as a turbine is used in order to produce energy. In the present paper the VOS design procedure has been extended to the electrical regulation and a comparison between HR and ER efficiency and flexibility within a water distribution network is shown: HR was found more flexible than ER and more efficient. Finally a preliminary economic study has been carried out in order to show the viability of both systems, and a shorter payback period of the electromechanical equipment was found for HR mode.

  3. Teaching Design in Middle-School: Instructors' Concerns and Scaffolding Strategies

    Science.gov (United States)

    Bamberger, Yael M.; Cahill, Clara S.

    2013-04-01

    This study deals with engineering education in the middle-school level. Its focus is instructors' concerns in teaching design, as well as scaffolding strategies that can help teachers deal with these concerns. Through participatory action research, nine instructors engaged in a process of development and instruction of a curriculum about energy along with engineering design. A 50-h curriculum was piloted during a summer camp for 38 middle-school students. Data was collected through instructors' materials: observation field notes, daily reflections and post-camp discussions. In addition, students' artifacts and planning graphical models were collected in order to explore how instructors' concerns were aligned with students' learning. Findings indicate three main tensions that reflect instructors' main concerns: how to provide sufficient scaffolding yet encourage creativity, how to scaffold hands-on experiences that promote mindful planning, and how to scaffold students' modeling practices. Pedagogical strategies for teaching design that developed through this work are described, as well as the ways they address the National Research Council (A framework for K-12 science education: practices, crosscutting concepts, and core ideas. National Academies Press, Washington, DC, 2011) core ideas of engineering education and the International Technological Literacy standards (ITEA in Standards for technological literacy, 3rd edn. International Technology education Association, Reston, VA, 2007).

  4. Applying Instructional Design Strategies and Behavior Theory to Household Disaster Preparedness Training.

    Science.gov (United States)

    Thomas, Tracy N; Sobelson, Robyn K; Wigington, Corinne J; Davis, Alyson L; Harp, Victoria H; Leander-Griffith, Michelle; Cioffi, Joan P

    Interventions and media campaigns promoting household disaster preparedness have produced mixed results in affecting behaviors. In large part, this is due to the limited application of instructional design strategies and behavior theory, such as the Transtheoretical Model (TTM). This study describes the development and evaluation of Ready CDC, an intervention designed to increase household disaster preparedness among the Centers for Disease Control and Prevention (CDC) workforce. (1) Describe the instructional design strategies employed in the development of Ready CDC and (2) evaluate the intervention's impact on behavior change and factors influencing stage progression for household disaster preparedness behavior. Ready CDC was adapted from the Federal Emergency Management Agency's (FEMA's) Ready campaign. Offered to CDC staff September 2013-November 2015, it consisted of a preassessment of preparedness attitudes and behaviors, an in-person training, behavioral reinforcement communications, and a 3-month follow-up postassessment. Ready CDC employed well-accepted design strategies, including presenting stimulus material and enhancing transfer of desired behavior. Excluding those in the TTM "maintenance" stage at baseline, this study determined 44% of 208 participants progressed at least 1 stage for developing a written disaster plan. Moreover, assessment of progression by stage found among participants in the "precontemplation" (n = 16), "contemplation" (n = 15), and "preparation" (n = 125) stages at baseline for assembling an emergency kit, 25%, 27%, and 43% moved beyond the "preparation" stage, respectively. Factors influencing stage movement included knowledge, attitudes, and community resiliency but varied depending on baseline stage of change. Employing instructional strategies and behavioral theories in preparedness interventions optimizes the potential for individuals to adopt preparedness behaviors. Study findings suggest that stage movement toward

  5. iPhone application development strategies for efficient mobile design and delivery

    CERN Document Server

    Hahn, Jim

    2011-01-01

    iPhone application development is explained here in an accessible treatment for the generalist Library and Information Science (LIS) practitioner. Future information-seeking practices by users will take place across a diverse array of ubiquitous computing devices. iPhone applications represent one of the most compelling new platforms for which to remediate and re-engineer library service. Strategies of efficient mobile design and delivery include adapting computing best practices of data independence and adhering to web standards as articulated by the W3C. These best practices apply across the

  6. Advanced nuclear power systems: Design, technology, safety and strategies for their deployment

    International Nuclear Information System (INIS)

    1994-01-01

    The objectives of the symposium were to provide high level decision makers with an overview of the discussion concerning the need for nuclear power and salient features of advanced nuclear power systems; a forum for discussing the design objectives and safety approaches for such systems and the views of regulatory bodies; a forum for identifying barriers to the deployment of these systems and for reviewing strategies to overcome these barriers; and a forum for reviewing options for international cooperation in the development and deployment of such systems. Refs, figs and tabs

  7. Fuel management strategy for the compact core design of RSG GAS (MPR-30)

    Energy Technology Data Exchange (ETDEWEB)

    Sembiring, T.M.; Liem, P.H.; Tukiran, S. [National Nuclear Energy Agency (Batan), PUSPIPTEK-Serpong Tangerang (Indonesia)

    2000-07-01

    The rearrangement of the core configuration of the RSG GAS reactor to obtain a compact core is in progress. A fuel management strategy is proposed for the equilibrium compact core of this reactor by reducing the number of in-core irradiation positions. The reduced irradiation positions are based on the activities during 12 years operation. The obtained compact core gives significant extension of the operation cycle length so that the reactor availability and utilization can be enhanced. The equilibrium compact silicide core obtained met the imposed design constraints and safety requirements. (author)

  8. Fuel management strategy for the compact core design of RSG GAS (MPR-30)

    International Nuclear Information System (INIS)

    Sembiring, T.M.; Liem, P.H.; Tukiran, S.

    2000-01-01

    The rearrangement of the core configuration of the RSG GAS reactor to obtain a compact core is in progress. A fuel management strategy is proposed for the equilibrium compact core of this reactor by reducing the number of in-core irradiation positions. The reduced irradiation positions are based on the activities during 12 years operation. The obtained compact core gives significant extension of the operation cycle length so that the reactor availability and utilization can be enhanced. The equilibrium compact silicide core obtained met the imposed design constraints and safety requirements. (author)

  9. An efficient strategy for designing ambipolar organic semiconductor material: Introducing dehydrogenated phosphorus atoms into pentacene core

    Science.gov (United States)

    Tang, Xiao-Dan

    2017-09-01

    The charge transport properties of phosphapentacene (P-PEN) derivatives were systematically explored by theoretical calculation. The dehydrogenated P-PENs have reasonable frontier molecular orbital energy levels to facilitate both electron and hole injection. The reduced reorganization energies of dehydrogenated P-PENs could be intimately connected to the bonding nature of phosphorus atoms. From the idea of homology modeling, the crystal structure of TIPSE-4P-2p is constructed and fully optimized. Fascinatingly, TIPSE-4P-2p shows the intrinsic property of ambipolar transport in both hopping and band models. Thus, introducing dehydrogenated phosphorus atoms into pentacene core could be an efficient strategy for designing ambipolar material.

  10. The Impact of Breakthrough Therapy Designation on Development Strategies and Timelines for Nononcology Drugs and Vaccines.

    Science.gov (United States)

    Poirier, A F; Murphy, W R

    2016-12-01

    The US Food and Drug Administration (FDA) Safety and Innovation Act (FDASIA, 2012) introduced the Breakthrough Therapy Designation (BTD), a new tool to expedite development of medicines to treat serious or life-threatening diseases. The majority of BTDs have gone to oncology drugs, and a recent publication by Shea et al. 1 reviewed the impact of BTD on oncology drug development. This article reviews the impact of BTD on development strategies and timelines for nononcology drugs. © 2016 American Society for Clinical Pharmacology and Therapeutics.

  11. Safety Design Strategy for the Advanced Test Reactor Diesel Bus (E-3) and Switchgear Replacement Project

    International Nuclear Information System (INIS)

    Duckwitz, Noel

    2011-01-01

    In accordance with the requirements of U.S. Department of Energy (DOE) Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets,' safety must be integrated into the design process for new or major modifications to DOE Hazard Category 1, 2, and 3 nuclear facilities. The intended purpose of this requirement involves the handling of hazardous materials, both radiological and chemical, in a way that provides adequate protection to the public, workers, and the environment. Requirements provided in DOE Order 413.3B and DOE Order 420.1B, 'Facility Safety,' and the expectations of DOE-STD-1189-2008, 'Integration of Safety into the Design Process,' provide for identification of hazards early in the project and use of an integrated team approach to design safety into the facility. This safety design strategy provides the basic safety-in-design principles and concepts that will be used for the Advanced Test Reactor Reliability Sustainment Project. While this project does not introduce new hazards to the ATR, it has the potential for significant impacts to safety-related systems, structures, and components that are credited in the ATR safety basis and are being replaced. Thus the project has been determined to meet the definition of a major modification and is being managed accordingly.

  12. Safety Design Strategy for the Advanced Test Reactor Emergency Firewater Injection System Replacement Project

    International Nuclear Information System (INIS)

    Duckwitz, Noel

    2011-01-01

    In accordance with the requirements of U.S. Department of Energy (DOE) Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets,' safety must be integrated into the design process for new or major modifications to DOE Hazard Category 1, 2, and 3 nuclear facilities. The intended purpose of this requirement involves the handling of hazardous materials, both radiological and chemical, in a way that provides adequate protection to the public, workers, and the environment. Requirements provided in DOE Order 413.3B and DOE Order 420.1B, 'Facility Safety,' and the expectations of DOE-STD-1189-2008, 'Integration of Safety into the Design Process,' provide for identification of hazards early in the project and use of an integrated team approach to design safety into the facility. This safety design strategy provides the basic safety-in-design principles and concepts that will be used for the Advanced Test Reactor Reliability Sustainment Project. While this project does not introduce new hazards to the ATR, it has the potential for significant impacts to safety-related systems, structures, and components that are credited in the ATR safety basis and are being replaced. Thus the project has been determined to meet the definition of a major modification and is being managed accordingly.

  13. Parameter-Invariant Hierarchical Exclusive Alphabet Design for 2-WRC with HDF Strategy

    Directory of Open Access Journals (Sweden)

    T. Uřičář

    2010-01-01

    Full Text Available Hierarchical eXclusive Code (HXC for the Hierarchical Decode and Forward (HDF strategy in the Wireless 2-Way Relay Channel (2-WRC has the achievable rate region extended beyond the classical MAC region. Although direct HXC design is in general highly complex, a layered approach to HXC design is a feasible solution. While the outer layer code of the layered HXC can be any state-of-the-art capacity approaching code, the inner layer must be designed in such a way that the exclusive property of hierarchical symbols (received at the relay will be provided. The simplest case of the inner HXC layer is a simple signal space channel symbol memoryless mapper called Hierarchical eXclusive Alphabet (HXA. The proper design of HXA is important, especially in the case of parametric channels, where channel parametrization (e.g. phase rotation can violate the exclusive property of hierarchical symbols (as seen by the relay, resulting in significant capacity degradation. In this paper we introduce an example of a geometrical approach to Parameter-Invariant HXA design, and we show that the corresponding hierarchical MAC capacity region extends beyond the classical MAC region, irrespective of the channel pametrization.

  14. Plasma facing components: a conceptual design strategy for the first wall in FAST tokamak

    Science.gov (United States)

    Labate, C.; Di Gironimo, G.; Renno, F.

    2015-09-01

    Satellite tokamaks are conceived with the main purpose of developing new or alternative ITER- and DEMO-relevant technologies, able to contribute in resolving the pending issues about plasma operation. In particular, a high criticality needs to be associated to the design of plasma facing components, i.e. first wall (FW) and divertor, due to physical, topological and thermo-structural reasons. In such a context, the design of the FW in FAST fusion plant, whose operational range is close to ITER’s one, takes place. According to the mission of experimental satellites, the FW design strategy, which is presented in this paper relies on a series of innovative design choices and proposals with a particular attention to the typical key points of plasma facing components design. Such an approach, taking into account a series of involved physical constraints and functional requirements to be fulfilled, marks a clear borderline with the FW solution adopted in ITER, in terms of basic ideas, manufacturing aspects, remote maintenance procedure, manifolds management, cooling cycle and support system configuration.

  15. DSC: software tool for simulation-based design of control strategies applied to wastewater treatment plants.

    Science.gov (United States)

    Ruano, M V; Ribes, J; Seco, A; Ferrer, J

    2011-01-01

    This paper presents a computer tool called DSC (Simulation based Controllers Design) that enables an easy design of control systems and strategies applied to wastewater treatment plants. Although the control systems are developed and evaluated by simulation, this tool aims to facilitate the direct implementation of the designed control system to the PC of the full-scale WWTP (wastewater treatment plants). The designed control system can be programmed in a dedicated control application and can be connected to either the simulation software or the SCADA of the plant. To this end, the developed DSC incorporates an OPC server (OLE for process control) which facilitates an open-standard communication protocol for different industrial process applications. The potential capabilities of the DSC tool are illustrated through the example of a full-scale application. An aeration control system applied to a nutrient removing WWTP was designed, tuned and evaluated with the DSC tool before its implementation in the full scale plant. The control parameters obtained by simulation were suitable for the full scale plant with only few modifications to improve the control performance. With the DSC tool, the control systems performance can be easily evaluated by simulation. Once developed and tuned by simulation, the control systems can be directly applied to the full-scale WWTP.

  16. System Design Strategies of Post-Accident Monitoring System for a PGSFR in Korea

    International Nuclear Information System (INIS)

    Jang, Gwi-sook; Jeong, Kwang-il; Keum, Jong-yong; Seong, Seung-hwan

    2013-06-01

    Monitoring systems of a PGSFR (Prototype Gen-IV Sodium-cooled Fast Reactor) in Korea provide alarms, integrity information in the reactor building, sodium-water reaction information in the steam generator, fuel failure information, and supporting information for maintenance and inspection. In particular, a Post-Accident Monitoring System (PAMS) provides primary information for operators to assess the plant conditions and perform their role in bringing the plant to a safe condition during an accident. Some PAM variables can be allocated as more two types. It is important for system designers to confirm the suitability of the selection of PAM variables. In addition, the PAMS is a position 4 display against common cause failures of safety I and C systems. The position 4 display should be independent and diverse from the safety I and C systems. The diversity of safety I and C equipment has led to an increase in the design and verification and validation cost. Thus, this paper proposes the system design strategies on the PAMS design problems of the PGSFR in KOREA. The results will be input into a conceptual system design for the PAMS of the PGSFR in KOREA. (authors)

  17. Immune Interventions to Eliminate the HIV Reservoir.

    Science.gov (United States)

    Hsu, Denise C; Ananworanich, Jintanat

    2017-10-26

    Inducing HIV remission is a monumental challenge. A potential strategy is the "kick and kill" approach where latently infected cells are first activated to express viral proteins and then eliminated through cytopathic effects of HIV or immune-mediated killing. However, pre-existing immune responses to HIV cannot eradicate HIV infection due to the presence of escape variants, inadequate magnitude, and breadth of responses as well as immune exhaustion. The two major approaches to boost immune-mediated elimination of infected cells include enhancing cytotoxic T lymphocyte mediated killing and harnessing antibodies to eliminate HIV. Specific strategies include increasing the magnitude and breadth of T cell responses through therapeutic vaccinations, reversing the effects of T cell exhaustion using immune checkpoint inhibition, employing bispecific T cell targeting immunomodulatory proteins or dual-affinity re-targeting molecules to direct cytotoxic T lymphocytes to virus-expressing cells and broadly neutralizing antibody infusions. Methods to steer immune responses to tissue sites where latently infected cells are located need to be further explored. Ultimately, strategies to induce HIV remission must be tolerable, safe, and scalable in order to make a global impact.

  18. Preliminary conceptual design of the secondary sodium circuit-eliminated JSFR (Japan Sodium Fast Reactor) adopting a supercritical CO2 turbine system (1). Sodium/CO2 heat exchanger

    International Nuclear Information System (INIS)

    Kisohara, Naoyuki; Sakamoto, Yoshihiko; Kotake, Shoji

    2014-09-01

    Research and development of the supercritical CO 2 (S-CO 2 ) cycle turbine system is underway in various countries for further improvement of the safety and economy of sodium-cooled fast reactors. The Component Design and Balance-Of-Plant (CD and BOP) of the Generation IV International Nuclear Forum (Gen-IV) has addressed this study, and their analytical and experimental results have been discussed between the relevant countries. JAEA, who is a member of the CD and BOP, has performed a design study of an S-CO 2 gas turbine system applied to the Japan Sodium-cooled Fast Reactor (JSFR). In this study, the S-CO 2 cycle turbine system was directly connected to the primary sodium system of the JSFR to eliminate the secondary sodium circuit, aiming for further economical improvement. This is because there is no risk of sodium-water reaction in the S-CO 2 cycle turbine system of SFRs. The Na/CO 2 heat exchanger is one of the key components for the secondary sodium system eliminated SFR, and this report describes its structure and the safety in case of CO 2 leak. A Printed Circuit Heat Exchanger (PCHE), which has a greater heat transfer performance, is employed to the heat exchanger. Another advantage of the PCHE is to limit the area affected by a leak of CO 2 because of its partitioned flow path structure. A SiC/SiC ceramic composite material is used for the PCHE to prevent crack growth and to reduce thermal stress. The Na/CO 2 heat exchanger has been designed in such a way that a number of small heat transfer modules are combined in the vessel in consideration of manufacture and repair. The primary sodium pump is installed in the center of the heat exchanger vessel. CO 2 leak events in the heat exchanger have been also evaluated, and it revealed that no significant effect has arisen on the core or the primary sodium boundary. (author)

  19. An Elimination of Resonance in Electric Drives

    Directory of Open Access Journals (Sweden)

    Michal Malek

    2011-01-01

    Full Text Available Flexible couplings together with resonance phenomenon are present mainly in the field of servodrives where high accuracy and dynamic requirements are crucial. When dynamics doesn’t correlate with mechanical system design, unwanted frequencies in the system are exited. Sometimes we haven’t conditions (whether material or space to design mechanical system with resonant frequencies too high to be exited. In that case we must choose compensating methods which can eliminate these phenomenons. This paper is dedicated to them.

  20. Control Law Design for Twin Rotor MIMO System with Nonlinear Control Strategy

    Directory of Open Access Journals (Sweden)

    M. Ilyas

    2016-01-01

    Full Text Available Modeling of complex air vehicles is a challenging task due to high nonlinear behavior and significant coupling effect between rotors. Twin rotor multi-input multioutput system (TRMS is a laboratory setup designed for control experiments, which resembles a helicopter with unstable, nonlinear, and coupled dynamics. This paper focuses on the design and analysis of sliding mode control (SMC and backstepping controller for pitch and yaw angle control of main and tail rotor of the TRMS under parametric uncertainty. The proposed control strategy with SMC and backstepping achieves all mentioned limitations of TRMS. Result analysis of SMC and backstepping control schemes elucidates that backstepping provides efficient behavior with the parametric uncertainty for twin rotor system. Chattering and oscillating behaviors of SMC are removed with the backstepping control scheme considering the pitch and yaw angle for TRMS.

  1. Design Strategies and Preliminary Prototype for a Low-Cost Arsenic Removal System for Rural Bangladesh

    Energy Technology Data Exchange (ETDEWEB)

    Mathieu, Johanna L.; Gadgil, Ashok J.; Kowolik, Kristin; Qazi, Shefah; Agogino, Alice M.

    2009-09-14

    Researchers have invented a material called ARUBA -- Arsenic Removal Using Bottom Ash -- that effectively and affordably removes arsenic from Bangladesh groundwater. Through analysis of studies across a range of disciplines, observations, and informal interviews conducted over three trips to Bangladesh, we have applied mechanical engineering design methodology to develop eight key design strategies, which were used in the development of a low-cost, community-scale water treatment system that uses ARUBA to removearsenic from drinking water. We have constructed, tested, and analysed a scale version of the system. Experiments have shown that the system is capable of reducing high levels of arsenic (nearly 600 ppb) to below the Bangladesh standard of 50 ppb, while remaining affordable to people living on less than US$2/day. The system could be sustainably implemented as a public-private partnership in rural Bangladesh.

  2. Service platforms management strategy: case study of an interior design firm

    Directory of Open Access Journals (Sweden)

    Leonel Del Rey de Melo Filho

    2015-03-01

    Full Text Available Platform management is a strategic tool for firms of various sizes, although it demands studies in the service sector. The aim of this paper is to investigate a use of platform management, designed to reach flexibility and operational dynamics in service projects. The studied platform is evaluated as a strategic resource in a particular case. The contributions of the service platform were explored from Resource-Based View (RBV and Service Marketing (SM perspectives, to study their effects on firms’ performance. The research strategy used was an exploratory case study in an interior design firm. The data collection techniques included a participant observation, document analysis and a focus group with firm managers. The research demonstrated that platform management is a strategic resource that assists with the planning of internal capabilities, market positioning, and provides better customer service.

  3. Functional components for a design strategy: Hot cell shielding in the high reliability safeguards methodology

    Energy Technology Data Exchange (ETDEWEB)

    Borrelli, R.A., E-mail: rborrelli@uidaho.edu

    2016-08-15

    The high reliability safeguards (HRS) methodology has been established for the safeguardability of advanced nuclear energy systems (NESs). HRS is being developed in order to integrate safety, security, and safeguards concerns, while also optimizing these with operational goals for facilities that handle special nuclear material (SNM). Currently, a commercial pyroprocessing facility is used as an example system. One of the goals in the HRS methodology is to apply intrinsic features of the system to a design strategy. This current study investigates the thickness of the hot cell walls that could adequately shield processed materials. This is an important design consideration that carries implications regarding the formation of material balance areas, the location of key measurement points, and material flow in the facility.

  4. Agent-based Cyber Control Strategy Design for Resilient Control Systems: Concepts, Architecture and Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Craig Rieger; Milos Manic; Miles McQueen

    2012-08-01

    The implementation of automated regulatory control has been around since the middle of the last century through analog means. It has allowed engineers to operate the plant more consistently by focusing on overall operations and settings instead of individual monitoring of local instruments (inside and outside of a control room). A similar approach is proposed for cyber security, where current border-protection designs have been inherited from information technology developments that lack consideration of the high-reliability, high consequence nature of industrial control systems. Instead of an independent development, however, an integrated approach is taken to develop a holistic understanding of performance. This performance takes shape inside a multiagent design, which provides a notional context to model highly decentralized and complex industrial process control systems, the nervous system of critical infrastructure. The resulting strategy will provide a framework for researching solutions to security and unrecognized interdependency concerns with industrial control systems.

  5. Metal-Organic Frameworks: Building Block Design Strategies for the Synthesis of MOFs.

    KAUST Repository

    Luebke, Ryan

    2014-09-01

    A significant and ongoing challenge in materials chemistry and furthermore solid state chemistry is to design materials with the desired properties and characteristics. The field of Metal-Organic Frameworks (MOFs) offers several strategies to address this challenge and has proven fruitful at allowing some degree of control over the resultant materials synthesized. Several methodologies for synthesis of MOFs have been developed which rely on use of predetermined building blocks. The work presented herein is focused on the utilization of two of these design principles, namely the use of molecular building blocks (MBBs) and supermolecular building blocks (SBBs) to target MOF materials having desired connectivities (topologies). These design strategies also permit the introduction of specific chemical moieties, allowing for modification of the MOFs properties. This research is predominantly focused on two platforms (rht-MOFs and ftw-MOFs) which topologically speaking are edge transitive binodal nets; ftw being a (4,12)-connected net and rht being a (3,24)-connected net. These highly connected nets (at least one node having connectivity greater than eight) have been purposefully targeted to increase the predictability of structural outcome. A general trend in topology is that there is an inverse relationship between the connectivity of the node(s) and the number of topological outcomes. Therefore the key to this research (and to effective use of the SBB and MBB approaches) is identification of conditions which allow for reliable formation of the targeted MBBs and SBBs. In the case of the research presented herein: a 12-connected Group IV or Rare Earth based hexanuclear MBB and a 24-connected transition metal based SBB were successfully targeted and synthesized. These two synthetic platforms will be presented and used as examples of how these design methods have been (and can be further) utilized to modify existing materials or develop new materials for gas storage and

  6. Design strategy for improving the energy efficiency in series hydraulic/electric synergy system

    International Nuclear Information System (INIS)

    Ramakrishnan, R.; Hiremath, Somashekhar S.; Singaperumal, M.

    2014-01-01

    Battery is a vital subsystem in an electric vehicle with regenerative braking system. The energy efficiency of an electric vehicle is improved by storing the regenerated energy in an electric battery, during braking, and reusing it during subsequent acceleration. Battery possesses a relatively poor power density and slow charging of regenerated energy, when compared to hydro-pneumatic accumulators. A series hydraulic/electric synergy system – an energy efficient mechatronics system is proposed to overcome the drawbacks in the conventional electric vehicle with regenerative braking. Even though, electric battery provides higher energy density than the accumulator system, optimal sizing of the hydro-pneumatic accumulator and other process parameters in the system to provide better energy density and efficiency. However, a trade-off prevails between the system energy delivered and energy consumed. This gives rise to a multiple objective problem. The proposed multi-objective design optimization procedure based on an evolutionary strategy algorithm maximizes the energy efficiency of the system. The system simulation results after optimization show that, the optimal system parameters increase the energy efficiency by 3% and hydraulic regeneration efficiency by 17.3%. The suggested design methodology provides a basis for the design of a series hydraulic/electric synergy system as energy efficient and zero emission system. - Highlights: • Dynamic analysis of SHESS to investigate energy efficiency. • Optimization of system parameters based on multi-objective design strategy. • Evaluation of improvements in system energy efficiency and hydraulic regeneration energy. • Identification of conditions at which hydraulic regenerative efficiency is maximized for minimum energy consumption. • Results confirm advantages of using SHESS

  7. Using visual thinking strategies with nursing students to enhance nursing assessment skills: A qualitative design.

    Science.gov (United States)

    Nanavaty, Joanne

    2018-03-01

    This qualitative design study addressed the enhancement of nursing assessment skills through the use of Visual Thinking Strategies and reflection. This study advances understanding of the use of Visual Thinking Strategies and reflection as ways to explore new methods of thinking and observing patient situations relating to health care. Sixty nursing students in a licensed practical nursing program made up the sample of participants who attended an art gallery as part of a class assignment. Participants replied to a survey of interest for participation at the art gallery. Participants reviewed artwork at the gallery and shared observations with the larger group during a post-conference session in a gathering area of the museum at the end of the visit. A reflective exercise on the art gallery experience exhibited further thoughts about the art gallery experience and demonstrated the connections made to clinical practice by the student. The findings of this study support the use of Visual Thinking Strategies and reflection as effective teaching and learning tools for enhancing nursing skills. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Strategy Design of Hybrid Energy Storage System for Smoothing Wind Power Fluctuations

    Directory of Open Access Journals (Sweden)

    Jingyu Liu

    2016-11-01

    Full Text Available With the increasing contribution of wind power plants, the reliability and security of modern power systems have become a huge challenge due to the uncertainty and intermittency of wind energy sources. In this paper, a hybrid energy storage system (HESS consisting of battery and supercapacitor is built to smooth the power fluctuations of wind power. A power allocation strategy is proposed to give full play to the respective advantages of the two energy storage components. In the proposed strategy, the low-frequency and high-frequency components of wind power fluctuations are absorbed by battery groups and supercapacitor groups, respectively. By inhibiting the low-frequency components of supercapacitor current, the times of charging-discharging of battery groups can be significantly reduced. A DC/AC converter is applied to achieve the power exchange between the HESS and the grid. Adjustment rules for regulating state-of-charge (SOC of energy storage elements are designed to avoid overcharge and deep discharge considering the safety and the high efficiency of the energy storage elements. Experimental results on the test platform verify the effectiveness of the proposed power allocation strategy in DC/AC converter and battery SOC adjustment rules for regulating SOC levels.

  9. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-03-01

    BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.

  10. Competitive Supply Chain Network Design Considering Marketing Strategies: A Hybrid Metaheuristic Algorithm

    Directory of Open Access Journals (Sweden)

    Ali Akbar Hasani

    2016-11-01

    Full Text Available In this paper, a comprehensive model is proposed to design a network for multi-period, multi-echelon, and multi-product inventory controlled the supply chain. Various marketing strategies and guerrilla marketing approaches are considered in the design process under the static competition condition. The goal of the proposed model is to efficiently respond to the customers’ demands in the presence of the pre-existing competitors and the price inelasticity of demands. The proposed optimization model considers multiple objectives that incorporate both market share and total profit of the considered supply chain network, simultaneously. To tackle the proposed multi-objective mixed-integer nonlinear programming model, an efficient hybrid meta-heuristic algorithm is developed that incorporates a Taguchi-based non-dominated sorting genetic algorithm-II and a particle swarm optimization. A variable neighborhood decomposition search is applied to enhance a local search process of the proposed hybrid solution algorithm. Computational results illustrate that the proposed model and solution algorithm are notably efficient in dealing with the competitive pressure by adopting the proper marketing strategies.

  11. Ergonomic design intervention strategy for work tools development for women agro based workers in Northeast India.

    Science.gov (United States)

    Chakrabarti, Debkumar; Bhattachheriya, Nandita

    2012-01-01

    Strategy for finding the appropriate strategy for work tool development has become a crucial issue in occupational wellness of varied nature of women workforce of Northeast India. This paper deals with ergonomics intervention through sustainable work tool design development process. Workers who frequently shift to different activities quite often in unorganised small-scale fruit processing units where productivity is directly related to the harvesting season require different work tools relevant to specific tasks and mostly workers themselves manage work tools of their own with available local resources. Whereas in contrast the tea-leaf pluckers are engaged in a single task throughout the year, and the work schedule and work equipment is decided and supplied to them based on the corporate decision where the workers do not have any individual control. Observations confirm the need for organising participatory workshops specific to trade based occupational well-being and different work tools for different tasks in mostly private owned unorganised sector. Implementation of single variety work tool development that supports a crucial component in tea-leaf plucking for which they are engaged in full time employment; and through a corporate decision a single design with its number of users makes a good effect.

  12. A conceptual design of assembly strategy and dedicated tools for assembly of 40o sector

    International Nuclear Information System (INIS)

    Park, H.K.; Nam, K.O.; Kim, D.J.; Ahn, H.J.; Lee, J.H.; Im, K.; Shaw, R.

    2010-01-01

    The International Thermanuclear Experimental Reactor (ITER) tokamak device is composed of 9 vacuum vessel (VV)/toroidal field coils (TFCs)/vacuum vessel thermal shields (VVTS) 40 o sectors. Each VV/TFCs/VVTS 40 o sector is made up of one 40 o VV, two 20 o TFCs and associated VVTS segments. The 40 o sectors are sub-assembled at assembly hall respectively and then nine 40 o sectors sub-assembled at assembly hall are finally assembled at tokamak in-pit hall. The assembly strategy and tools for the 40 o sector sub-assembly and final assembly should be developed to satisfy the basic assembly requirements of the ITER tokamak device. Accordingly, the purpose-built assembly tools should be designed and manufactured considering assembly plan, available space, cost, safety, easy operation, efficient maintenance, and so on. The 40 o sector assembly tools are classified into 2 groups. One group is the sub-assembly tools including upending tool, lifting tool, sub-assembly tool, VV supports and bracing tools used at assembly hall and the other group is the in-pit assembly tools including lifting tool, central column, radial beams and their supports. This paper describes the current status of the assembly strategy and major tools for the VV/TFCs/VVTS 40 o sector assembly at in-pit hall and assembly hall. The conceptual design of the major assembly tools and assembly process at assembly hall and tokamak in-pit hall are presented also.

  13. Co-designing communication and hazard preparedness strategies at Turrialba volcano, Costa Rica

    Science.gov (United States)

    van Manen, Saskia; Avard, Geoffroy; Martinez, Maria

    2014-05-01

    approach, is likely to result in DRR strategies that are considered more applicable and user-friendly by end users. This work presents results of a disaster preparedness workshop held with local communities around Turrialba. The workshop engaged the community in ideation and designing of concepts to increase levels of hazard preparedness. The concepts resulting from the workshop will be used to develop, through further collaboration with the end-users, DRR strategies tailored to be more relevant and accessible to the public. The approach presented here can equally be applied to the communication of DRR strategies in relation to other (natural) hazards.

  14. Using computer-aided drug design and medicinal chemistry strategies in the fight against diabetes.

    Science.gov (United States)

    Semighini, Evandro P; Resende, Jonathan A; de Andrade, Peterson; Morais, Pedro A B; Carvalho, Ivone; Taft, Carlton A; Silva, Carlos H T P

    2011-04-01

    The aim of this work is to present a simple, practical and efficient protocol for drug design, in particular Diabetes, which includes selection of the illness, good choice of a target as well as a bioactive ligand and then usage of various computer aided drug design and medicinal chemistry tools to design novel potential drug candidates in different diseases. We have selected the validated target dipeptidyl peptidase IV (DPP-IV), whose inhibition contributes to reduce glucose levels in type 2 diabetes patients. The most active inhibitor with complex X-ray structure reported was initially extracted from the BindingDB database. By using molecular modification strategies widely used in medicinal chemistry, besides current state-of-the-art tools in drug design (including flexible docking, virtual screening, molecular interaction fields, molecular dynamics, ADME and toxicity predictions), we have proposed 4 novel potential DPP-IV inhibitors with drug properties for Diabetes control, which have been supported and validated by all the computational tools used herewith.

  15. Loving Nature From the Inside Out: A Biophilia Matrix Identification Strategy for Designers.

    Science.gov (United States)

    McGee, Beth; Marshall-Baker, Anna

    2015-01-01

    The development of the Biophilic Design Matrix (BDM) was to aid designers or other specialists in identifying and quantifying biophilic features through a visual inventory of interior spaces. With mounting evidence to support the healing attributes of biophilic environments, we propose a method to identify biophilic content within interior spaces. Such a strategy offers much promise to the advancement of restorative environments. The BDM was based on Stephen Kellert's biophilic design attribute list and modified to be appropriate for interior environments, specifically children's healthcare spaces. A photo-ethnographic documentation method of 24 child life play spaces within a South Atlantic state was used to determine whether the BDM could reliably reveal biophilic features (listed as attributes by Kellert in 2008). This matrix appears useful in documenting biophilia within the pediatric healthcare context, attesting to the usability and functionality of the BDM for this special population. Specifically, the BDM revealed that biophilic attributes were constantly present in some spaces while others were completely absent. When a biophilic attribute was present, the BDM indicated that they varied considerably in type and occurrence. Thus, use of the BDM in the hospital areas designed for patient recreation and play successfully provided a visual inventory of biophilic features as well as the frequency of application. Further use of the BDM as a tool for strategizing biophilic feature inclusion can thus increase the connections available with nature in the interior, beneficial for optimizing health and wellness. © The Author(s) 2015.

  16. Models for solid oxide fuel cell systems exploitation of models hierarchy for industrial design of control and diagnosis strategies

    CERN Document Server

    Marra, Dario; Polverino, Pierpaolo; Sorrentino, Marco

    2016-01-01

    This book presents methodologies for optimal design of control and diagnosis strategies for Solid Oxide Fuel Cell systems. A key feature of the methodologies presented is the exploitation of modelling tools that balance accuracy and computational burden.

  17. Book of extended synopses. International symposium on advanced nuclear power systems. Design, technology, safety and strategies for their deployment

    International Nuclear Information System (INIS)

    1993-01-01

    During the symposium the design, technology, safety and strategy for the development of advanced nuclear power systems were discussed. 20 papers were presented at the symposium. A separate abstract was prepared for each of these papers. Refs

  18. Design, implementation and evaluation of innovative science teaching strategies for non-formal learning in a natural history museum

    Science.gov (United States)

    Çil, Emine; Maccario, Nihal; Yanmaz, Durmuş

    2016-09-01

    Background: Museums are useful educational resources in science teaching. Teaching strategies which promote hands-on activities, student-centred learning, and rich social interaction must be designed and implemented throughout the museum visit for effective science learning.

  19. Using a Mixed Methods Approach to Explore Strategies, Metacognitive Awareness and the Effects of Task Design on Listening Development

    Science.gov (United States)

    O'Bryan, Anne; Hegelheimer, Volker

    2009-01-01

    Although research in the area of listening processes and strategies is increasing, it still remains the least understood and least researched of the four skills (Vandergrift, 2007). Based on research in listening comprehension, task design and strategies, this article uses a mixed methods approach to shed light on the development of four…

  20. Designing Programme Implementation Strategies to Increase the Adoption and Use of Biosand Water Filters in Rural India

    OpenAIRE

    Tommy K.K. Ngai; Richard A. Fenner

    2014-01-01

    Low-cost household water treatment systems are innovations designed to improve the quality of drinking water at the point of use. This study investigates how an NGO can design appropriate programme strategies in order to increase the adoption and sustained use of household sand filters in rural India. A system dynamics computer model was developed and used to assess 18 potential programme strategies for their effectiveness in increasing filter use at two and ten years into the future, under s...

  1. Design and implementation of co-operative control strategy for hybrid AC/DC microgrids

    Science.gov (United States)

    Mahmud, Rasel

    This thesis is mainly divided in two major sections: 1) Modeling and control of AC microgrid, DC microgrid, Hybrid AC/DC microgrid using distributed co-operative control, and 2) Development of a four bus laboratory prototype of an AC microgrid system. At first, a distributed cooperative control (DCC) for a DC microgrid considering the state-of-charge (SoC) of the batteries in a typical plug-in-electric-vehicle (PEV) is developed. In DC microgrids, this methodology is developed to assist the load sharing amongst the distributed generation units (DGs), according to their ratings with improved voltage regulation. Subsequently, a DCC based control algorithm for AC microgrid is also investigated to improve the performance of AC microgrid in terms of power sharing among the DGs, voltage regulation and frequency deviation. The results validate the advantages of the proposed methodology as compared to traditional droop control of AC microgrid. The DCC-based control methodology for AC microgrid and DC microgrid are further expanded to develop a DCC-based power management algorithm for hybrid AC/DC microgrid. The developed algorithm for hybrid microgrid controls the power flow through the interfacing converter (IC) between the AC and DC microgrids. This will facilitate the power sharing between the DGs according to their power ratings. Moreover, it enables the fixed scheduled power delivery at different operating conditions, while maintaining good voltage regulation and improved frequency profile. The second section provides a detailed explanation and step-by-step design and development of an AC/DC microgrid testbed. Controllers for the three-phase inverters are designed and tested on different generation units along with their corresponding inductor-capacitor-inductor (LCL) filters to eliminate the switching frequency harmonics. Electric power distribution line models are developed to form the microgrid network topology. Voltage and current sensors are placed in the proper

  2. A Strategy for Architecture Design of Crystalline Perovskite Light-Emitting Diodes with High Performance.

    Science.gov (United States)

    Shi, Yifei; Wu, Wen; Dong, Hua; Li, Guangru; Xi, Kai; Divitini, Giorgio; Ran, Chenxin; Yuan, Fang; Zhang, Min; Jiao, Bo; Hou, Xun; Wu, Zhaoxin

    2018-06-01

    All present designs of perovskite light-emitting diodes (PeLEDs) stem from polymer light-emitting diodes (PLEDs) or perovskite solar cells. The optimal structure of PeLEDs can be predicted to differ from PLEDs due to the different fluorescence dynamics and crystallization between perovskite and polymer. Herein, a new design strategy and conception is introduced, "insulator-perovskite-insulator" (IPI) architecture tailored to PeLEDs. As examples of FAPbBr 3 and MAPbBr 3 , it is experimentally shown that the IPI structure effectively induces charge carriers into perovskite crystals, blocks leakage currents via pinholes in the perovskite film, and avoids exciton quenching simultaneously. Consequently, as for FAPbBr 3 , a 30-fold enhancement in the current efficiency of IPI-structured PeLEDs compared to a control device with poly(3,4ethylenedioxythiophene):poly(styrene sulfonate) as hole-injection layer is achieved-from 0.64 to 20.3 cd A -1 -while the external quantum efficiency is increased from 0.174% to 5.53%. As the example of CsPbBr 3 , compared with the control device, both current efficiency and lifetime of IPI-structured PeLEDs are improved from 1.42 and 4 h to 9.86 cd A -1 and 96 h. This IPI architecture represents a novel strategy for the design of light-emitting didoes based on various perovskites with high efficiencies and stabilities. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Trend-Centric Motion Visualization: Designing and Applying a New Strategy for Analyzing Scientific Motion Collections.

    Science.gov (United States)

    Schroeder, David; Korsakov, Fedor; Knipe, Carissa Mai-Ping; Thorson, Lauren; Ellingson, Arin M; Nuckley, David; Carlis, John; Keefe, Daniel F

    2014-12-01

    In biomechanics studies, researchers collect, via experiments or simulations, datasets with hundreds or thousands of trials, each describing the same type of motion (e.g., a neck flexion-extension exercise) but under different conditions (e.g., different patients, different disease states, pre- and post-treatment). Analyzing similarities and differences across all of the trials in these collections is a major challenge. Visualizing a single trial at a time does not work, and the typical alternative of juxtaposing multiple trials in a single visual display leads to complex, difficult-to-interpret visualizations. We address this problem via a new strategy that organizes the analysis around motion trends rather than trials. This new strategy matches the cognitive approach that scientists would like to take when analyzing motion collections. We introduce several technical innovations making trend-centric motion visualization possible. First, an algorithm detects a motion collection's trends via time-dependent clustering. Second, a 2D graphical technique visualizes how trials leave and join trends. Third, a 3D graphical technique, using a median 3D motion plus a visual variance indicator, visualizes the biomechanics of the set of trials within each trend. These innovations are combined to create an interactive exploratory visualization tool, which we designed through an iterative process in collaboration with both domain scientists and a traditionally-trained graphic designer. We report on insights generated during this design process and demonstrate the tool's effectiveness via a validation study with synthetic data and feedback from expert musculoskeletal biomechanics researchers who used the tool to analyze the effects of disc degeneration on human spinal kinematics.

  4. Challenges for malaria elimination in Brazil.

    Science.gov (United States)

    Ferreira, Marcelo U; Castro, Marcia C

    2016-05-20

    Brazil currently contributes 42 % of all malaria cases reported in the Latin America and the Caribbean, a region where major progress towards malaria elimination has been achieved in recent years. In 2014, malaria burden in Brazil (143,910 microscopically confirmed cases and 41 malaria-related deaths) has reached its lowest levels in 35 years, Plasmodium falciparum is highly focal, and the geographic boundary of transmission has considerably shrunk. Transmission in Brazil remains entrenched in the Amazon Basin, which accounts for 99.5 % of the country's malaria burden. This paper reviews major lessons learned from past and current malaria control policies in Brazil. A comprehensive discussion of the scientific and logistic challenges that may impact malaria elimination efforts in the country is presented in light of the launching of the Plan for Elimination of Malaria in Brazil in November 2015. Challenges for malaria elimination addressed include the high prevalence of symptomless and submicroscopic infections, emerging anti-malarial drug resistance in P. falciparum and Plasmodium vivax and the lack of safe anti-relapse drugs, the largely neglected burden of malaria in pregnancy, the need for better vector control strategies where Anopheles mosquitoes present a highly variable biting behaviour, human movement, the need for effective surveillance and tools to identify foci of infection in areas with low transmission, and the effects of environmental changes and climatic variability in transmission. Control actions launched in Brazil and results to come are likely to influence control programs in other countries in the Americas.

  5. Elimination device for metal impurities

    International Nuclear Information System (INIS)

    Yanagisawa, Ko.

    1982-01-01

    Purpose: To enable reuse of adsorbing materials by eliminating Fe 3 O 4 films reduced with adsorbing performance by way of electrolytic polishing and then forming fresh membranes using high temperature steams. Constitution: An elimination device is provided to a coolant clean-up system of a reactor for eliminating impurities such as cobalt. The elimination device comprises adsorbing materials made of stainless steel tips or the likes having Fe 3 O 4 films. The adsorbing materials are regenerated by applying an electric current between grid-like cathode plates and anode plates to leach out the Fe 3 O 4 films, washing out the electrolytic solution by cleaning water and then applying steams at high temperature onto the adsorbing materials to thereby form fresh Fe 3 O 4 films again thereon. The regeneration of the adsorbing materials enables to eliminate Co 60 and the like in the primary coolant efficiently. (Moriyama, K.)

  6. PBL Trigger Design by Medical Students: An Effective Active Learning Strategy Outside the Classroom

    Science.gov (United States)

    Adiga, Indira Kakkunje; Nayak, Akshatha G.

    2016-01-01

    Introduction Problem Based Learning (PBL) is known world over as an effective, active learning strategy with many benefits for the student. Usually, in medical schools, PBL triggers are designed by a well-trained group of faculty from basic and clinical sciences. The challenge was whether this task could be given to students in the first year of their curriculum and be executed by them effectively. Aim To enhance active learning, comprehension and critical thinking with a view to promote horizontal and vertical integration between subjects. Materials and Methods Student volunteers of the first year MBBS course (n=10), who had been exposed to the curriculum for approximately 38 weeks and were familiar with the PBL process were recruited for the study. In addition to a handout on the topic ‘gout’, they were given the freedom to access any resource in the university library to construct the PBL triggers. The PBL triggers were vetted by two faculties. In addition to a focus group discussion with students, students’ and faculty’s responses were collected on a Likert scale. Results Students opined that the exercise helped improve their comprehension (100%), critical thinking abilities (90%) and clinical orientation to the topic (100%). They felt that designing a PBL trigger was a relevant active learning strategy (100%) and would help them answer questions on this topic better in the future (90%). The clinicians who examined the PBL triggers, felt that they were of good quality and that the process was a good tool for vertical integration between basic and clinical sciences. Discussion The results prove that students when given a challenge will rise to the occasion. Unfamiliarity with the nuances of a disease did not prevent them from going the extra mile to achieve their target. By taking part in this exercise, students benefitted in many ways and got a holistic understanding of the topic. Conclusion PBL trigger design can be introduced as an active learning

  7. PBL Trigger Design by Medical Students: An Effective Active Learning Strategy Outside the Classroom.

    Science.gov (United States)

    Roche, Maya; Adiga, Indira Kakkunje; Nayak, Akshatha G

    2016-12-01

    Problem Based Learning (PBL) is known world over as an effective, active learning strategy with many benefits for the student. Usually, in medical schools, PBL triggers are designed by a well-trained group of faculty from basic and clinical sciences. The challenge was whether this task could be given to students in the first year of their curriculum and be executed by them effectively. To enhance active learning, comprehension and critical thinking with a view to promote horizontal and vertical integration between subjects. Student volunteers of the first year MBBS course (n=10), who had been exposed to the curriculum for approximately 38 weeks and were familiar with the PBL process were recruited for the study. In addition to a handout on the topic 'gout', they were given the freedom to access any resource in the university library to construct the PBL triggers. The PBL triggers were vetted by two faculties. In addition to a focus group discussion with students, students' and faculty's responses were collected on a Likert scale. Students opined that the exercise helped improve their comprehension (100%), critical thinking abilities (90%) and clinical orientation to the topic (100%). They felt that designing a PBL trigger was a relevant active learning strategy (100%) and would help them answer questions on this topic better in the future (90%). The clinicians who examined the PBL triggers, felt that they were of good quality and that the process was a good tool for vertical integration between basic and clinical sciences. The results prove that students when given a challenge will rise to the occasion. Unfamiliarity with the nuances of a disease did not prevent them from going the extra mile to achieve their target. By taking part in this exercise, students benefitted in many ways and got a holistic understanding of the topic. PBL trigger design can be introduced as an active learning strategy for students in medical schools where PBL is part of the curriculum. It

  8. Strategies to design clinical studies to identify predictive biomarkers in cancer research.

    Science.gov (United States)

    Perez-Gracia, Jose Luis; Sanmamed, Miguel F; Bosch, Ana; Patiño-Garcia, Ana; Schalper, Kurt A; Segura, Victor; Bellmunt, Joaquim; Tabernero, Josep; Sweeney, Christopher J; Choueiri, Toni K; Martín, Miguel; Fusco, Juan Pablo; Rodriguez-Ruiz, Maria Esperanza; Calvo, Alfonso; Prior, Celia; Paz-Ares, Luis; Pio, Ruben; Gonzalez-Billalabeitia, Enrique; Gonzalez Hernandez, Alvaro; Páez, David; Piulats, Jose María; Gurpide, Alfonso; Andueza, Mapi; de Velasco, Guillermo; Pazo, Roberto; Grande, Enrique; Nicolas, Pilar; Abad-Santos, Francisco; Garcia-Donas, Jesus; Castellano, Daniel; Pajares, María J; Suarez, Cristina; Colomer, Ramon; Montuenga, Luis M; Melero, Ignacio

    2017-02-01

    The discovery of reliable biomarkers to predict efficacy and toxicity of anticancer drugs remains one of the key challenges in cancer research. Despite its relevance, no efficient study designs to identify promising candidate biomarkers have been established. This has led to the proliferation of a myriad of exploratory studies using dissimilar strategies, most of which fail to identify any promising targets and are seldom validated. The lack of a proper methodology also determines that many anti-cancer drugs are developed below their potential, due to failure to identify predictive biomarkers. While some drugs will be systematically administered to many patients who will not benefit from them, leading to unnecessary toxicities and costs, others will never reach registration due to our inability to identify the specific patient population in which they are active. Despite these drawbacks, a limited number of outstanding predictive biomarkers have been successfully identified and validated, and have changed the standard practice of oncology. In this manuscript, a multidisciplinary panel reviews how those key biomarkers were identified and, based on those experiences, proposes a methodological framework-the DESIGN guidelines-to standardize the clinical design of biomarker identification studies and to develop future research in this pivotal field. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Evaluation of peptide designing strategy against subunit reassociation in mucin 1: A steered molecular dynamics approach.

    Directory of Open Access Journals (Sweden)

    J Lesitha Jeeva Kumari

    Full Text Available Subunit reassociation in mucin 1, a breast cancer tumor marker, is reported as one of the critical factors for its cytoplasmic activation. Inhibition of its heterodimeric association would therefore result in loss of its function and alter disease progression. The present study aimed at evaluating peptide inhibitor designing strategies that may serve as antagonist against this receptor-ligand alliance. Several peptides and their derivatives were designed based on native residues, subunit interface, hydrogen bonding and secondary structure. Docking studies with the peptides were carried on the receptor subunit and their binding affinities were evaluated using steered molecular dynamics simulation and umbrella sampling. Our results showed that among all the different classes of peptides evaluated, the receptor based peptide showed the highest binding affinity. This result was concurrent with the experimental observation that the receptor-ligand alliance in mucin 1 is highly specific. Our results also show that peptide ligand against this subunit association is only stabilized through native residue inter-protein interaction irrespective of the peptide structure, peptide length and number of hydrogen bonds. Consistency in binding affinity, pull force and free energy barrier was observed with only the receptor derived peptides which resulted in favorable interprotein interactions at the interface. Several observations were made and discussed which will eventually lead to designing efficient peptide inhibitors against mucin 1 heterodimeric subunit reassociation.

  10. Computationally efficient design of optimal output feedback strategies for controllable passive damping devices

    International Nuclear Information System (INIS)

    Kamalzare, Mahmoud; Johnson, Erik A; Wojtkiewicz, Steven F

    2014-01-01

    Designing control strategies for smart structures, such as those with semiactive devices, is complicated by the nonlinear nature of the feedback control, secondary clipping control and other additional requirements such as device saturation. The usual design approach resorts to large-scale simulation parameter studies that are computationally expensive. The authors have previously developed an approach for state-feedback semiactive clipped-optimal control design, based on a nonlinear Volterra integral equation that provides for the computationally efficient simulation of such systems. This paper expands the applicability of the approach by demonstrating that it can also be adapted to accommodate more realistic cases when, instead of full state feedback, only a limited set of noisy response measurements is available to the controller. This extension requires incorporating a Kalman filter (KF) estimator, which is linear, into the nominal model of the uncontrolled system. The efficacy of the approach is demonstrated by a numerical study of a 100-degree-of-freedom frame model, excited by a filtered Gaussian random excitation, with noisy acceleration sensor measurements to determine the semiactive control commands. The results show that the proposed method can improve computational efficiency by more than two orders of magnitude relative to a conventional solver, while retaining a comparable level of accuracy. Further, the proposed approach is shown to be similarly efficient for an extensive Monte Carlo simulation to evaluate the effects of sensor noise levels and KF tuning on the accuracy of the response. (paper)

  11. Study, analysis and design of plasma torch for the elimination of hospital wastes in Chile; Estudio, analisis y diseno de antorcha de plasma para eliminacion de residuos hospitalarios en Chile

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Ramirez, Ximena Jesus

    2014-07-01

    Within the field of new technologies in industry, the use of plasma is notable for its high speed of expansion and development. Currently one of its uses is the elimination of waste as it allows to avoid problems such as the formation of airborne byproducts and hazardous solids that represent a serious problem for the environment and human health. Plasma, when it is at extreme temperatures above 3,000 Celsius, causes inorganic waste to disintegrate and to vitrify on a solid residue while organic waste is converted into gases. Unlike any other thermal treatment of waste (incineration, gasification, pyrolysis, etc.) and because it is not a combustion process, but atomization of matter, no pollutant emissions into the atmosphere (dioxins and similar) or ash, there are only simple gases and an inert solid completely vitrified that can be used in the construction, for the obtaining of urban furniture, as decorative element, for example. The project proposes to develop an experimental device, laboratory plasma torch, to investigate its application in the reduction of hospital waste. It is expected to model, design and construct an experimental device that produces a plasma jet, whose temperature is adequate to perform hospital waste treatments at the laboratory level. The main objective of the project is to contribute to the generation of knowledge in the field of hospital waste reduction through the use of technological applications of plasmas, generating the necessary research for the study of art and technological development at the experimental level in the indicated field.

  12. Proposed strategies for designing sustainable high-rise apartment buildings in Ho Chi Minh City responding to critical urban issues

    Science.gov (United States)

    Truong, Nguyen Hoang Long; Huan Giang, Ngoc; Binh Duong, Trong

    2018-03-01

    This paper aims at finding practical strategies for designing sustainable high-rise apartment buildings in Ho Chi Minh City responding to varied municipal issues. Two steps are made. Step-1 identifies the critical issues of Ho Chi Minh City which are associated with high-rise apartment building projects. Step-2 finds potential and applicable strategies which are solutions for the critical issues in Step-1 with reference of seven selected assessment methods. The study finds the set of 58 strategies applicable to designing sustainable high-rise apartment buildings in Ho Chi Minh City.

  13. Towards the design of an optimal strategy for the production of ergosterol from Saccharomyces cerevisiae yeasts.

    Science.gov (United States)

    Náhlík, Jan; Hrnčiřík, Pavel; Mareš, Jan; Rychtera, Mojmír; Kent, Christopher A

    2017-05-01

    The total yield of ergosterol produced by the fermentation of the yeast Saccharomyces cerevisiae depends on the final amount of yeast biomass and the ergosterol content in the cells. At the same time ergosterol purity-defined as percentage of ergosterol in the total sterols in the yeast-is equally important for efficient downstream processing. This study investigated the development of both the ergosterol content and ergosterol purity in different physiological (metabolic) states of the microorganism S. cerevisiae with the aim of reaching maximal ergosterol productivity. To expose the yeast culture to different physiological states during fermentation an on-line inference of the current physiological state of the culture was used. The results achieved made it possible to design a new production strategy, which consists of two preferable metabolic states, oxidative-fermentative growth on glucose followed by oxidative growth on glucose and ethanol simultaneously. Experimental application of this strategy achieved a value of the total efficiency of ergosterol production (defined as product of ergosterol yield coefficient and volumetric productivity), 103.84 × 10 -6 g L -1 h -1 , more than three times higher than with standard baker's yeast fed-batch cultivations, which attained in average 32.14 × 10 -6 g L -1 h -1 . At the same time the final content of ergosterol in dry biomass was 2.43%, with a purity 86%. These results make the product obtained by the proposed control strategy suitable for effective down-stream processing. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:838-848, 2017. © 2017 American Institute of Chemical Engineers.

  14. Falls Assessment Clinical Trial (FACT: design, interventions, recruitment strategies and participant characteristics

    Directory of Open Access Journals (Sweden)

    Lawton Beverley

    2007-07-01

    Full Text Available Abstract Background Guidelines recommend multifactorial intervention programmes to prevent falls in older adults but there are few randomised controlled trials in a real life health care setting. We describe the rationale, intervention, study design, recruitment strategies and baseline characteristics of participants in a randomised controlled trial of a multifactorial falls prevention programme in primary health care. Methods Participants are patients from 19 primary care practices in Hutt Valley, New Zealand aged 75 years and over who have fallen in the past year and live independently. Two recruitment strategies were used – waiting room screening and practice mail-out. Intervention participants receive a community based nurse assessment of falls and fracture risk factors, home hazards, referral to appropriate community interventions, and strength and balance exercise programme. Control participants receive usual care and social visits. Outcome measures include number of falls and injuries over 12 months, balance, strength, falls efficacy, activities of daily living, quality of life, and physical activity levels. Results 312 participants were recruited (69% women. Of those who had fallen, 58% of people screened in the practice waiting rooms and 40% when screened by practice letter were willing to participate. Characteristics of participants recruited using the two methods are similar (p > 0.05. Mean age of all participants was 81 years (SD 5. On average participants have 7 medical conditions, take 5.5 medications (29% on psychotropics with a median of 2 falls (interquartile range 1, 3 in the previous year. Conclusion The two recruitment strategies and the community based intervention delivery were feasible and successful, identifying a high risk group with multiple falls. Recruitment in the waiting room gave higher response rates but was less efficient than practice mail-out. Testing the effectiveness of an evidence based intervention in a

  15. Managerial process improvement: a lean approach to eliminating medication delivery.

    Science.gov (United States)

    Hussain, Aftab; Stewart, LaShonda M; Rivers, Patrick A; Munchus, George

    2015-01-01

    Statistical evidence shows that medication errors are a major cause of injuries that concerns all health care oganizations. Despite all the efforts to improve the quality of care, the lack of understanding and inability of management to design a robust system that will strategically target those factors is a major cause of distress. The paper aims to discuss these issues. Achieving optimum organizational performance requires two key variables; work process factors and human performance factors. The approach is that healthcare administrators must take in account both variables in designing a strategy to reduce medication errors. However, strategies that will combat such phenomena require that managers and administrators understand the key factors that are causing medication delivery errors. The authors recommend that healthcare organizations implement the Toyota Production System (TPS) combined with human performance improvement (HPI) methodologies to eliminate medication delivery errors in hospitals. Despite all the efforts to improve the quality of care, there continues to be a lack of understanding and the ability of management to design a robust system that will strategically target those factors associated with medication errors. This paper proposes a solution to an ambiguous workflow process using the TPS combined with the HPI system.

  16. Design strategy for a tunable antenna on a partially magnetized ferrite LTCC substrate

    KAUST Repository

    Ghaffar, Farhan A.

    2014-07-01

    Typical microwave simulators cannot accurately predict the behavior of an antenna on a partially magnetized substrate as they assume the substrate to be in fully saturate state. In this work, a new simulation strategy aided by theoretical analysis, is presented to model a tunable patch antenna on a partially magnetized ferrite substrate through a combination of magnetostatic and microwave simulators. An antenna prototype is fabricated in Ferrite LTCC medium to verify the partially magnetized state simulations. The measured results are in close agreement with the simulations, contrary to the case where the substrate is assumed to be in saturation. The prototype designed for 13 GHz exhibits a tuning range of 10 % making it highly suitable for tunable and reconfigurable wireless applications.

  17. Supercritical carbon dioxide design strategies: from drug carriers to soft killers.

    Science.gov (United States)

    Aguiar-Ricardo, Ana; Bonifácio, Vasco D B; Casimiro, Teresa; Correia, Vanessa G

    2015-12-28

    The integrated use of supercritical carbon dioxide (scCO(2)) and micro- and nanotechnologies has enabled new sustainable strategies for the manufacturing of new medications. 'Green' scCO(2)-based methodologies are well suited to improve either the synthesis or materials processing leading to the assembly of three-dimensional multifunctional constructs. By using scCO(2) either as C1 feedstock or as solvent, simple, economic, efficient and clean routes can be designed to synthesize materials with unique properties such as polyurea dendrimers and oxazoline-based polymers/oligomers. These new biocompatible, biodegradable and water-soluble polymeric materials can be engineered into multifunctional constructs with antimicrobial activity, targeting moieties, labelling units and/or efficiently loaded with therapeutics. This mini-review highlights the particular features exhibited by these materials resulting directly from the followed supercritical routes. © 2015 The Author(s).

  18. The Retail Chain Design for Perishable Food: The Case of Price Strategy and Shelf Space Allocation

    Directory of Open Access Journals (Sweden)

    Yujie Xiao

    2016-12-01

    Full Text Available Managing perishable food in a retail store is quite difficult because of the product’s short lifetime and deterioration. Many elements, such as price, shelf space allocation, and quality, which can affect the consumption rate, should be taken into account when the perishable food retail chain is designed. The modern tracking technologies provide good opportunities to improve the management of the perishable food retail chain. In this research, we develop a mathematical model for a single-item retail chain and determine the pricing strategy, shelf space allocation, and order quantity to maximize the retailer’s total profit with the application of tracking technologies. Then the single-item retail chain is extended into a multi-item one with a shelf space capacity and a simple algorithm is developed to find the optimal allocation of shelf space among these items. Finally, numerical experiments and real-life examples are conducted to illustrate the proposed models.

  19. The design strategy of selective PTP1B inhibitors over TCPTP.

    Science.gov (United States)

    Li, XiangQian; Wang, LiJun; Shi, DaYong

    2016-08-15

    Protein tyrosine phosphatase 1B (PTP1B) has already been well studied as a highly validated therapeutic target for diabetes and obesity. However, the lack of selectivity limited further studies and clinical applications of PTP1B inhibitors, especially over T-cell protein tyrosine phosphatase (TCPTP). In this review, we enumerate the published specific inhibitors of PTP1B, discuss the structure-activity relationships by analysis of their X-ray structures or docking results, and summarize the characteristic of selectivity related residues and groups. Furthermore, the design strategy of selective PTP1B inhibitors over TCPTP is also proposed. We hope our work could provide an effective way to gain specific PTP1B inhibitors. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Strategies to optimize the biocompatibility of iron oxide nanoparticles - ;SPIONs safe by design;

    Science.gov (United States)

    Janko, Christina; Zaloga, Jan; Pöttler, Marina; Dürr, Stephan; Eberbeck, Dietmar; Tietze, Rainer; Lyer, Stefan; Alexiou, Christoph

    2017-06-01

    Various nanoparticle systems have been developed for medical applications in recent years. For constant improvement of efficacy and safety of nanoparticles, a close interdisciplinary interplay between synthesis, physicochemical characterizations and toxicological investigations is urgently needed. Based on combined toxicological data, we follow a ;safe-by design; strategy for our superparamagnetic iron oxide nanoparticles (SPION). Using complementary interference-free toxicological assay systems, we initially identified agglomeration tendencies in physiological fluids, strong uptake by cells and improvable biocompatibility of lauric acid (LA)-coated SPIONs (SPIONLA). Thus, we decided to further stabilize those particles by an artificial protein corona consisting of serum albumin. This approach finally lead to increased colloidal stability, augmented drug loading capacity and improved biocompatibility in previous in vitro assays. Here, we show in whole blood ex vivo and on isolated red blood cells (RBC) that a protein corona protects RBCs from hemolysis by SPIONs.

  1. Design strategy for a tunable antenna on a partially magnetized ferrite LTCC substrate

    KAUST Repository

    Ghaffar, Farhan A.; Shamim, Atif; Bray, Joey R.

    2014-01-01

    Typical microwave simulators cannot accurately predict the behavior of an antenna on a partially magnetized substrate as they assume the substrate to be in fully saturate state. In this work, a new simulation strategy aided by theoretical analysis, is presented to model a tunable patch antenna on a partially magnetized ferrite substrate through a combination of magnetostatic and microwave simulators. An antenna prototype is fabricated in Ferrite LTCC medium to verify the partially magnetized state simulations. The measured results are in close agreement with the simulations, contrary to the case where the substrate is assumed to be in saturation. The prototype designed for 13 GHz exhibits a tuning range of 10 % making it highly suitable for tunable and reconfigurable wireless applications.

  2. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P. [Building Science Corporation, Somerville, MA (United States)

    2014-03-01

    Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?

  3. Beam physics design strategy for a high-current rf linac

    Energy Technology Data Exchange (ETDEWEB)

    Reiser, M. [Univ. of Maryland, College Park, MD (United States)

    1995-10-01

    The high average beam power of an rf linac system for transmutation of nuclear waste puts very stringent requirements on beam quality and beam control. Fractional beam losses along the accelerator must be kept at extremely low levels to assure {open_quotes}hands-on{close_quotes} maintenance. Hence, halo formation and large-amplitude tails in the particle distribution due to beam mismatch and equipartitioning effects must be avoided. This implies that the beam should ideally be in near-perfect thermal equilibrium from injection to full energy - in contrast to existing rf linacs in which the transverse temperature, T {sub {perpendicular}}, is higher than the longitudinal temperature, T{sub {parallel}}. The physics and parameter scaling for such a system will be reviewed using the results of recent work on high-intensity bunched beams. A design strategy for a high-current rf linac with equilibrated beam will be proposed.

  4. Strategies for the design of bright upconversion nanoparticles for bioanalytical applications

    Science.gov (United States)

    Wiesholler, Lisa M.; Hirsch, Thomas

    2018-06-01

    In recent years upconversion nanoparticles (UCNPs) received great attention because of their outstanding optical properties. Especially in bioanalytical applications this class of materials can overcome limitations of common probes like high background fluorescence or blinking. Nevertheless, the requirements for UCNPs to be applicable in biological samples, e.g. small size, water-dispersibility, excitation at low power density are in contradiction with the demand of high brightness. Therefore, a lot of attention is payed to the enhancement of the upconversion luminescence. This review discuss the recent trends and strategies to boost the brightness of UCNPs, classified in three main directions: a) improving the efficiency of energy absorption by the sensitizer via coupling to plasmonic or photonic structures or via attachment of ligands for light harvesting; b) minimizing non-radiative deactivation by variations in the architecture of UCNPs; and c) changing the excitation wavelength to get bright particles at low excitation power density for applications in aqueous systems. These strategies are critically reviewed including current limitations as well as future perspectives for the design of efficient UCNPs especially for sensing application in biological samples or cells.

  5. Activation loop targeting strategy for design of receptor-interacting protein kinase 2 (RIPK2) inhibitors.

    Science.gov (United States)

    Suebsuwong, Chalada; Pinkas, Daniel M; Ray, Soumya S; Bufton, Joshua C; Dai, Bing; Bullock, Alex N; Degterev, Alexei; Cuny, Gregory D

    2018-02-15

    Development of selective kinase inhibitors remains a challenge due to considerable amino acid sequence similarity among family members particularly in the ATP binding site. Targeting the activation loop might offer improved inhibitor selectivity since this region of kinases is less conserved. However, the strategy presents difficulties due to activation loop flexibility. Herein, we report the design of receptor-interacting protein kinase 2 (RIPK2) inhibitors based on pan-kinase inhibitor regorafenib that aim to engage basic activation loop residues Lys169 or Arg171. We report development of CSR35 that displayed >10-fold selective inhibition of RIPK2 versus VEGFR2, the target of regorafenib. A co-crystal structure of CSR35 with RIPK2 revealed a resolved activation loop with an ionic interaction between the carboxylic acid installed in the inhibitor and the side-chain of Lys169. Our data provides principle feasibility of developing activation loop targeting type II inhibitors as a complementary strategy for achieving improved selectivity. Copyright © 2018 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  6. The Study of an Optimal Robust Design and Adjustable Ordering Strategies in the HSCM.

    Science.gov (United States)

    Liao, Hung-Chang; Chen, Yan-Kwang; Wang, Ya-huei

    2015-01-01

    The purpose of this study was to establish a hospital supply chain management (HSCM) model in which three kinds of drugs in the same class and with the same indications were used in creating an optimal robust design and adjustable ordering strategies to deal with a drug shortage. The main assumption was that although each doctor has his/her own prescription pattern, when there is a shortage of a particular drug, the doctor may choose a similar drug with the same indications as a replacement. Four steps were used to construct and analyze the HSCM model. The computation technology used included a simulation, a neural network (NN), and a genetic algorithm (GA). The mathematical methods of the simulation and the NN were used to construct a relationship between the factor levels and performance, while the GA was used to obtain the optimal combination of factor levels from the NN. A sensitivity analysis was also used to assess the change in the optimal factor levels. Adjustable ordering strategies were also developed to prevent drug shortages.

  7. 2009 Melbourne metropolitan sewerage strategy: a portfolio of decentralised and on-site concept designs.

    Science.gov (United States)

    Brown, V; Jackson, D W; Khalifé, M

    2010-01-01

    The bulk and retail water companies of the greater Melbourne area are developing the 2009 Metropolitan Sewerage Strategy to provide sustainable sewerage services to 2060. The objective of the strategy is to establish long term principles and near term actions to produce a robust sewage management system for Melbourne. Melbourne's existing sewerage system is largely centralised and discharges to two major treatment plants. Several small satellite treatment plants service local urban areas generally more distant from the centralised system. Decentralised and on-site wastewater systems are options for future sewage management and could play a role in local recycling. A portfolio of 18 on-site and decentralised concept designs was developed, applicable to the full range of urban development types in Melbourne. The concepts can be used in evaluation of metropolitan system configurations as part of future integrated water cycle planning. The options included secondary and tertiary treatment systems incorporating re-use of water for non potable uses, urine separation, black and greywater separation and composting toilets. On-site and cluster treatment systems were analysed. Each option is described by its indicative capital and operating costs, energy use and water and nutrient balances. This paper summarises and compares the portfolio mix of decentralized and on-site options in Melbourne's context.

  8. Biogeography of Triatominae (Hemiptera: Reduviidae in Ecuador: implications for the design of control strategies

    Directory of Open Access Journals (Sweden)

    Abad-Franch Fernando

    2001-01-01

    Full Text Available Chagas disease control strategies strongly depend on the triatomine vector species involved in Trypanosoma cruzi transmission within each area. Here we report the results of the identification of specimens belonging to various species of Triatominae captured in Ecuador (15 species from 17 provinces and deposited in the entomological collections of the Catholic University of Ecuador (Quito, Instituto Oswaldo Cruz (Brazil, the Natural History Museum London (UK, the London School of Hygiene and Tropical Medicine (UK, the National Institute of Hygiene (Quito, and the Vozandes Hospital (Quito. A critical review of published information and new field records are presented. We analysed these data in relation to the life zones where triatomines occur (11 life zones, excluding those over 2,200 m altitude, and provide biogeographical maps for each species. These records are discussed in terms of epidemiological significance and design of control strategies. Findings relevant to the control of the main vector species are emphasised. Different lines of evidence suggest that Triatoma dimidiata is not native to Ecuador-Peru, and that synanthropic populations of Rhodnius ecuadoriensis in southern Ecuador-northern Peru might be isolated from their sylvatic conspecifics. Local eradication of T. dimidiata and these R. ecuadoriensis populations might therefore be attainable. However, the presence of a wide variety of native species indicates the necessity for a strong longitudinal surveillance system.

  9. Goals and strategies in the global control design of the OAJ Robotic Observatory

    Science.gov (United States)

    Yanes-Díaz, A.; Rueda-Teruel, S.; Antón, J. L.; Rueda-Teruel, F.; Moles, M.; Cenarro, A. J.; Marín-Franch, A.; Ederoclite, A.; Gruel, N.; Varela, J.; Cristóbal-Hornillos, D.; Chueca, S.; Díaz-Martín, M. C.; Guillén, L.; Luis-Simoes, R.; Maícas, N.; Lamadrid, J. L.; López-Sainz, A.; Hernández-Fuertes, J.; Valdivielso, L.; Mendes de Oliveira, C.; Penteado, P.; Schoenell, W.; Kanaan, A.

    2012-09-01

    There are many ways to solve the challenging problem of making a high performance robotic observatory from scratch. The Observatorio Astrofísico de Javalambre (OAJ) is a new astronomical facility located in the Sierra de Javalambre (Teruel, Spain) whose primary role will be to conduct all-sky astronomical surveys. The OAJ control system has been designed from a global point of view including astronomical subsystems as well as infrastructures and other facilities. Three main factors have been considered in the design of a global control system for the robotic OAJ: quality, reliability and efficiency. We propose CIA (Control Integrated Architecture) design and OEE (Overall Equipment Effectiveness) as a key performance indicator in order to improve operation processes, minimizing resources and obtaining high cost reduction whilst maintaining quality requirements. The OAJ subsystems considered for the control integrated architecture are the following: two wide-field telescopes and their instrumentation, active optics subsystems, facilities for sky quality monitoring (seeing, extinction, sky background, sky brightness, cloud distribution, meteorological station), domes and several infrastructure facilities such as water supply, glycol water, water treatment plant, air conditioning, compressed air, LN2 plant, illumination, surveillance, access control, fire suppression, electrical generators, electrical distribution, electrical consumption, communication network, Uninterruptible Power Supply and two main control rooms, one at the OAJ and the other remotely located in Teruel, 40km from the observatory, connected through a microwave radio-link. This paper presents the OAJ strategy in control design to achieve maximum quality efficiency for the observatory processes and operations, giving practical examples of our approach.

  10. Design, Implementation and Evaluation of Innovative Science Teaching Strategies for Non-Formal Learning in a Natural History Museum

    Science.gov (United States)

    Çil, Emine; Maccario, Nihal; Yanmaz, Durmus

    2016-01-01

    Background: Museums are useful educational resources in science teaching. Teaching strategies which promote hands-on activities, student-centred learning, and rich social interaction must be designed and implemented throughout the museum visit for effective science learning. Purpose: This study aimed to design and implement innovative teaching…

  11. Evolutionary Agent-based Models to design distributed water management strategies

    Science.gov (United States)

    Giuliani, M.; Castelletti, A.; Reed, P. M.

    2012-12-01

    There is growing awareness in the scientific community that the traditional centralized approach to water resources management, as described in much of the water resources literature, provides an ideal optimal solution, which is certainly useful to quantify the best physically achievable performance, but is generally inapplicable. Most real world water resources management problems are indeed characterized by the presence of multiple, distributed and institutionally-independent decision-makers. Multi-Agent Systems provide a potentially more realistic alternative framework to model multiple and self-interested decision-makers in a credible context. Each decision-maker can be represented by an agent who, being self-interested, acts according to local objective functions and produces negative externalities on system level objectives. Different levels of coordination can potentially be included in the framework by designing coordination mechanisms to drive the current decision-making structure toward the global system efficiency. Yet, the identification of effective coordination strategies can be particularly complex in modern institutional contexts and current practice is dependent on largely ad-hoc coordination strategies. In this work we propose a novel Evolutionary Agent-based Modeling (EAM) framework that enables a mapping of fully uncoordinated and centrally coordinated solutions into their relative "many-objective" tradeoffs using multiobjective evolutionary algorithms. Then, by analysing the conflicts between local individual agent and global system level objectives it is possible to more fully understand the causes, consequences, and potential solution strategies for coordination failures. Game-theoretic criteria have value for identifying the most interesting alternatives from a policy making point of view as well as the coordination mechanisms that can be applied to obtain these interesting solutions. The proposed approach is numerically tested on a

  12. Criteria for method selection and process design of a technical development strategy

    CSIR Research Space (South Africa)

    Joseph-Malherbe, S

    2012-08-01

    Full Text Available delivery strategy and a testing strategy with the associated approach and methods for each strategy. For example, the testing strategy will describe the testing approach of the system development cycle and it will include methods of testing, testing...

  13. Lessons Learned in Evaluating a Multisite, Comprehensive Teen Dating Violence Prevention Strategy: Design and Challenges of the Evaluation of Dating Matters: Strategies to Promote Healthy Teen Relationships.

    Science.gov (United States)

    Niolon, Phyllis Holditch; Taylor, Bruce G; Latzman, Natasha E; Vivolo-Kantor, Alana M; Valle, Linda Anne; Tharp, Andra T

    2016-03-01

    This paper describes the multisite, longitudinal cluster randomized controlled trial (RCT) design of the evaluation of the Dating Matters: Strategies to Promote Healthy Relationships initiative, and discusses challenges faced in conducting this evaluation. Health departments in 4 communities are partnering with middle schools in high-risk, urban communities to implement 2 models of teen dating violence (TDV) prevention over 4 years. Schools were randomized to receive either the Dating Matters comprehensive strategy or the "standard of care" strategy (an existing, evidence-based TDV prevention curriculum). Our design permits comparison of the relative effectiveness of the comprehensive and standard of care strategies. Multiple cohorts of students from 46 middle schools are surveyed in middle school and high school, and parents and educators from participating schools are also surveyed. Challenges discussed in conducting a multisite RCT include site variability, separation of implementation and evaluation responsibilities, school retention, parent engagement in research activities, and working within the context of high-risk urban schools and communities. We discuss the strengths and weaknesses of our approaches to these challenges in the hopes of informing future research. Despite multiple challenges, the design of the Dating Matters evaluation remains strong. We hope this paper provides researchers who are conducting complex evaluations of behavioral interventions with thoughtful discussion of the challenges we have faced and potential solutions to such challenges.

  14. Risk Management - Variance Minimization or Lower Tail Outcome Elimination

    DEFF Research Database (Denmark)

    Aabo, Tom

    2002-01-01

    on future cash flows (the budget), while risk managers concerned about costly lower tail outcomes will hedge (considerably) less depending on the level of uncertainty. A risk management strategy of lower tail outcome elimination is in line with theoretical recommendations in a corporate value......This paper illustrates the profound difference between a risk management strategy of variance minimization and a risk management strategy of lower tail outcome elimination. Risk managers concerned about the variability of cash flows will tend to center their hedge decisions on their best guess......-adding perspective. A cross-case study of blue-chip industrial companies partly supports the empirical use of a risk management strategy of lower tail outcome elimination but does not exclude other factors from (co-)driving the observations....

  15. Current strategies in multiphasic scaffold design for osteochondral tissue engineering: A review.

    Science.gov (United States)

    Yousefi, Azizeh-Mitra; Hoque, Md Enamul; Prasad, Rangabhatala G S V; Uth, Nicholas

    2015-07-01

    The repair of osteochondral defects requires a tissue engineering approach that aims at mimicking the physiological properties and structure of two different tissues (cartilage and bone) using specifically designed scaffold-cell constructs. Biphasic and triphasic approaches utilize two or three different architectures, materials, or composites to produce a multilayered construct. This article gives an overview of some of the current strategies in multiphasic/gradient-based scaffold architectures and compositions for tissue engineering of osteochondral defects. In addition, the application of finite element analysis (FEA) in scaffold design and simulation of in vitro and in vivo cell growth outcomes has been briefly covered. FEA-based approaches can potentially be coupled with computer-assisted fabrication systems for controlled deposition and additive manufacturing of the simulated patterns. Finally, a summary of the existing challenges associated with the repair of osteochondral defects as well as some recommendations for future directions have been brought up in the concluding section of this article. © 2014 Wiley Periodicals, Inc.

  16. Consumer Intervention Mapping—A Tool for Designing Future Product Strategies within Circular Product Service Systems

    Directory of Open Access Journals (Sweden)

    Matt Sinclair

    2018-06-01

    Full Text Available Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption, lower transport emissions and extend product lifetimes. At the same time smart products within the Internet of Things will gather and report data on user behaviour and product status. Many sustainable design tools have previously been developed but few are able to imagine and develop visions of how future sustainable product service systems might be manifested. This paper introduces the concept of Consumer Intervention Mapping as a tool for creating future product strategies. The tool visualises the points within a product’s lifecycle where stakeholders are able to intervene in the product’s expected journey. This perspective enables the rapid construction of scenarios that explore and describe future circular product service systems. Validation of the tool in three workshops is described and the outcomes are presented. Consumer Intervention Mapping is successful in creating scenarios that describe existing product service systems and new product concepts adapted to a Circular Economy paradigm. Further work is required to refine the tool’s performance in more focused and reflective design exercises.

  17. Proportional counter end effects eliminator

    International Nuclear Information System (INIS)

    Meekins, J.F.

    1976-01-01

    An improved gas-filled proportional counter which includes a resistor network connected between the anode and cathode at the ends of the counter in order to eliminate ''end effects'' is described. 3 Claims, 2 Drawing Figures

  18. Defense Logistics Agency Revenue Eliminations

    National Research Council Canada - National Science Library

    1996-01-01

    The issue of revenue eliminations was identified during our work on the Defense Logistics Agency portion of the Audit of Revenue Accounts in the FY 1996 Financial Statements of the Defense Business Operations Fund...

  19. Achieving consensus in robot swarms design and analysis of strategies for the best-of-n problem

    CERN Document Server

    Valentini, Gabriele

    2017-01-01

    This book focuses on the design and analysis of collective decision-making strategies for the best-of-n problem. After providing a formalization of the structure of the best-of-n problem supported by a comprehensive survey of the swarm robotics literature, it introduces the functioning of a collective decision-making strategy and identifies a set of mechanisms that are essential for a strategy to solve the best-of-n problem. The best-of-n problem is an abstraction that captures the frequent requirement of a robot swarm to choose one option from of a finite set when optimizing benefits and costs. The book leverages the identification of these mechanisms to develop a modular and model-driven methodology to design collective decision-making strategies and to analyze their performance at different level of abstractions. Lastly, the author provides a series of case studies in which the proposed methodology is used to design different strategies, using robot experiments to show how the designed strategies can b...

  20. Development of high-immersive simulation system for designing maintenance strategy and its application to CLEAR-I

    International Nuclear Information System (INIS)

    Yang, Zihui; He, Tao; Shang, Leiming; Long, Pengcheng; Hu, Liqin

    2015-01-01

    Highlights: • A system was self-developed to simulate and verify the maintenance strategy. • Large-scale 3D radiation scene can be rapidly built and rendered in real-time. • A high efficiency simulation way was provided by tracking 6-DOF body motion. • It has been applied to CLEAR-I and proved maintenance strategy was feasible. - Abstract: The maintenance strategy is imperative and important to be considered in the design process of advanced nuclear reactor as early as possible. The design and validation of the maintenance strategy are key challenges which remain to be resolved due to the complex mechanical structure, the expensive physical mockup, and the potential risk of radiation hazards. In this paper, a high-immersive interactive simulation system has been developed to simulate and verify maintenance strategy by using virtual reality. Main features include: (1) rapid modeling and real-time rendering of the large-scale three-dimensional radiation scene, (2) real-time interactive roaming by tracking the 6-DOF body motion, (3) the interactive disassembly simulation of the mechanism structure were controlled by the hand gestures. The system can provide designers with an intuitive experience environment, an efficient and flexible interactive way as well as the whole process simulation of maintenance strategy. It has been applied to simulate and verify the maintenance strategy of the spallation target proton beam window for China LEAd-based research Reactor (CLEAR-I). The simulation result proved the maintenance strategy of proton beam window was reasonable and feasible. The system was useful to verify maintenance strategy, optimize maintenance operation, reduce intervention time and exposure dose of workers. It provided a high efficiency and low cost way for simulating maintenance strategy to meet the requirements of ALARA rules and can be extended to other nuclear facilities

  1. Diuretic Strategies in Acute Heart Failure and Renal Dysfunction: Conventional vs Carbohydrate Antigen 125-guided Strategy. Clinical Trial Design.

    Science.gov (United States)

    García-Blas, Sergio; Bonanad, Clara; Llàcer, Pau; Ventura, Silvia; Núñez, José María; Sánchez, Ruth; Chamorro, Carlos; Fácila, Lorenzo; de la Espriella, Rafael; Vaquer, Juana María; Cordero, Alberto; Roqué, Mercè; Ortiz, Víctor; Racugno, Paolo; Bodí, Vicent; Valero, Ernesto; Santas, Enrique; Moreno, María Del Carmen; Miñana, Gema; Carratalá, Arturo; Bondanza, Lourdes; Payá, Ana; Cardells, Ingrid; Heredia, Raquel; Pellicer, Mauricio; Valls, Guillermo; Palau, Patricia; Bosch, María José; Raso, Rafael; Sánchez, Andrés; Bertomeu-González, Vicente; Bertomeu-Martínez, Vicente; Montagud-Balaguer, Vicente; Albiach-Montañana, Cristina; Pendás-Meneau, Jezabel; Marcaida, Goitzane; Cervantes-García, Sonia; San Antonio, Rodolfo; de Mingo, Elisabet; Chorro, Francisco J; Sanchis, Juan; Núñez, Julio

    2017-12-01

    The optimal treatment of patients with acute heart failure (AHF) and cardiorenal syndrome type 1 (CRS-1) is far from being well-defined. Arterial hypoperfusion in concert with venous congestion plays a crucial role in the pathophysiology of CRS-I. Plasma carbohydrate antigen 125 (CA125) has emerged as a surrogate of fluid overload in AHF. The aim of this study was to evaluate the clinical usefulness of CA125 for tailoring the intensity of diuretic therapy in patients with CRS-1. Multicenter, open-label, parallel clinical trial, in which patients with AHF and serum creatinine ≥ 1.4mg/dL on admission will be randomized to: a) standard diuretic strategy: titration-based on conventional clinical and biochemical evaluation, or b) diuretic strategy based on CA125: high dose if CA125 > 35 U/mL, and low doses otherwise. The main endpoint will be renal function changes at 24 and 72hours after therapy initiation. Secondary endpoints will include: a) clinical and biochemical changes at 24 and 72hours, and b) renal function changes and major clinical events at 30 days. The results of this study will add important knowledge on the usefulness of CA125 for guiding diuretic treatment in CRS-1. In addition, it will pave the way toward a better knowledge of the pathophysiology of this challenging situation. We hypothesize that higher levels of CA125 will identify a patient population with CRS-1 who could benefit from the use of a more intense diuretic strategy. Conversely, low levels of this glycoprotein could select those patients who would be harmed by high diuretic doses. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

  2. Targeting the dopamine D3 receptor: an overview of drug design strategies.

    Science.gov (United States)

    Cortés, Antoni; Moreno, Estefanía; Rodríguez-Ruiz, Mar; Canela, Enric I; Casadó, Vicent

    2016-07-01

    Dopamine is a neurotransmitter widely distributed in both the periphery and the central nervous system (CNS). Its physiological effects are mediated by five closely related G protein-coupled receptors (GPCRs) that are divided into two major subclasses: the D1-like (D1, D5) and the D2-like (D2, D3, D4) receptors. D3 receptors (D3Rs) have the highest density in the limbic areas of the brain, which are associated with cognitive and emotional functions. These receptors are therefore attractive targets for therapeutic management. This review summarizes the functional and pharmacological characteristics of D3Rs, including the design and clinical relevance of full agonists, partial agonists and antagonists, as well as the capacity of these receptors to form active homodimers, heterodimers or higher order receptor complexes as pharmacological targets in several neurological and neurodegenerative disorders. The high sequence homology between D3R and the D2-type challenges the development of D3R-selective compounds. The design of new D3R-preferential ligands with improved physicochemical properties should provide a better pharmacokinetic/bioavailability profile and lesser toxicity than is found with existing D3R ligands. It is also essential to optimize D3R affinity and, especially, D3R vs. D2-type binding and functional selectivity ratios. Developing allosteric and bitopic ligands should help to improve the D3R selectivity of these drugs. As most evidence points to the ability of GPCRs to form homomers and heteromers, the most promising therapeutic strategy in the future is likely to involve the application of heteromer-selective drugs. These selective ligands would display different affinities for a given receptor depending on the receptor partners within the heteromer. Therefore, designing novel compounds that specifically target and modulate D1R-D3R heteromers would be an interesting approach for the treatment of levodopa (L-DOPA)-induced dyskinesias.

  3. Surveillance Monitoring Management for General Care Units: Strategy, Design, and Implementation.

    Science.gov (United States)

    McGrath, Susan P; Taenzer, Andreas H; Karon, Nancy; Blike, George

    2016-07-01

    The growing number of monitoring devices, combined with suboptimal patient monitoring and alarm management strategies, has increased "alarm fatigue," which have led to serious consequences. Most reported alarm man- agement approaches have focused on the critical care setting. Since 2007 Dartmouth-Hitchcock (Lebanon, New Hamp- shire) has developed a generalizable and effective design, implementation, and performance evaluation approach to alarm systems for continuous monitoring in general care settings (that is, patient surveillance monitoring). In late 2007, a patient surveillance monitoring system was piloted on the basis of a structured design and implementation approach in a 36-bed orthopedics unit. Beginning in early 2009, it was expanded to cover more than 200 inpatient beds in all medicine and surgical units, except for psychiatry and labor and delivery. Improvements in clinical outcomes (reduction of unplanned transfers by 50% and reduction of rescue events by more than 60% in 2008) and approximately two alarms per patient per 12-hour nursing shift in the original pilot unit have been sustained across most D-H general care units in spite of increasing patient acuity and unit occupancy. Sample analysis of pager notifications indicates that more than 85% of all alarm conditions are resolved within 30 seconds and that more than 99% are resolved before escalation is triggered. The D-H surveillance monitoring system employs several important, generalizable features to manage alarms in a general care setting: alarm delays, static thresholds set appropriately for the prevalence of events in this setting, directed alarm annunciation, and policy-driven customization of thresholds to allow clinicians to respond to needs of individual patients. The systematic approach to design, implementation, and performance management has been key to the success of the system.

  4. Understanding HIV infection for the design of a therapeutic vaccine. Part II: Vaccination strategies for HIV

    NARCIS (Netherlands)

    Goede, A.L. de; Vulto, A.G.; Osterhaus, A.D.; Gruters, R.A.

    2015-01-01

    HIV infection leads to a gradual loss CD4+ T lymphocytes comprising immune competence and progression to AIDS. Effective treatment with combined antiretroviral drugs (cART) decreases viral load below detectable levels but is not able to eliminate the virus from the body. The success of cART is

  5. Redundancy Elimination in DTN via ACK Mechanism

    Directory of Open Access Journals (Sweden)

    Xiqing Zhang

    2015-08-01

    Full Text Available The traditional routing protocols for delay tolerant networks (DTN usually take the strategy of spreading multiple copies of one message to the networks. When one copy reaches destination, the transmission of other copies not only waste the bandwidth but also deprive other messages of the opportunities for transmission. This paper brings up a mechanism to eliminate the redundant copies. By adding an acknowledge field to the packet header to delete redundant copies, it can degrade the network overhead while improve the delivery ratio. Simulation results confirm that the proposed method can improve the performance of epidemic and Spray and Wait routing protocol.

  6. Elimination reactions. V. Steric effects in Hofmann elimination

    International Nuclear Information System (INIS)

    Coke, J.L.; Smith, G.D.; Britton, G.H. Jr.

    1975-01-01

    Earlier Hofmann elimination studies were extended, and the percent syn eliminations in several ring systems have been correlated using cis-d 1 and trans-d 1 models. The measurements of several syn and anti k/sub H//k/sub D/ kinetic isotope effects are reported. Results indicate that Hofmann elimination of N,N,N-trimethyl-3,3-dimethylcyclopentylammonium hydroxide goes by 97 percent syn mechanism to give 3,3-dimethylcyclopentene and by 70 + - 6 percent syn mechanism to give 4,4-dimethylcyclopentene. There appears to be severe steric interactions in the anti mechanism in the 3,3-dimethylcyclopentyl system. Results indicate that, for Hofmann pyrolysis of trimethylammonium hydroxides, cyclopentene is formed by a 39 +- 7 percent syn mechanism, cyclohexene is formed by a 2 + - 2 percent syn mechanism, and cycloheptene is formed by a 30 +- 2 percent syn mechanism. Steric effects on isotope effects and mechanisms are discussed. (U.S.)

  7. Progress toward elimination of onchocerciasis in the Americas.

    Science.gov (United States)

    Sauerbrey, Mauricio; Rakers, Lindsay J; Richards, Frank O

    2018-03-01

    The Onchocerciasis Elimination Program for the Americas (OEPA) is a regional initiative and international partnership that has made considerable progress toward its goal since it was launched in 1993. Its strategy is based on mass drug administration of ivermectin (Mectizan, donated by MSD, also known as Merck & Co., Inc., Kenilworth, NJ, USA), twice or four times per year, with at least 85% coverage of eligible populations. From 1989 to 2016, 11 741 276 ivermectin treatments have been given in the Americas, eliminating transmission in 11 of 13 foci. The OEPA's success has had a great influence on programs in Africa, especially Sudan and Uganda, which moved from a control to an elimination strategy in 2006 and 2007, respectively. The successes in the Americas have also greatly influenced WHO guidelines for onchocerciasis transmission elimination. With four of the six originally endemic American countries now WHO verified as having eliminated onchocerciasis transmission, and 95% of ivermectin treatments in the region halted, the regional focus is now on the remaining active transmission zone, called the Yanomami Area, on the border between Venezuela and Brazil. Both countries have difficult political climates that hinder the elimination task in this remote and relatively neglected region. As with other elimination efforts, 'the final inch' is often the most difficult task of all.

  8. Design strategies for dynamic closed-loop optogenetic neurocontrol in vivo

    Science.gov (United States)

    Bolus, M. F.; Willats, A. A.; Whitmire, C. J.; Rozell, C. J.; Stanley, G. B.

    2018-04-01

    Objective. Controlling neural activity enables the possibility of manipulating sensory perception, cognitive processes, and body movement, in addition to providing a powerful framework for functionally disentangling the neural circuits that underlie these complex phenomena. Over the last decade, optogenetic stimulation has become an increasingly important and powerful tool for understanding neural circuit function, owing to the ability to target specific cell types and bidirectionally modulate neural activity. To date, most stimulation has been provided in open-loop or in an on/off closed-loop fashion, where previously-determined stimulation is triggered by an event. Here, we describe and demonstrate a design approach for precise optogenetic control of neuronal firing rate modulation using feedback to guide stimulation continuously. Approach. Using the rodent somatosensory thalamus as an experimental testbed for realizing desired time-varying patterns of firing rate modulation, we utilized a moving average exponential filter to estimate firing rate online from single-unit spiking measured extracellularly. This estimate of instantaneous rate served as feedback for a proportional integral (PI) controller, which was designed during the experiment based on a linear-nonlinear Poisson (LNP) model of the neuronal response to light. Main results. The LNP model fit during the experiment enabled robust closed-loop control, resulting in good tracking of sinusoidal and non-sinusoidal targets, and rejection of unmeasured disturbances. Closed-loop control also enabled manipulation of trial-to-trial variability. Significance. Because neuroscientists are faced with the challenge of dissecting the functions of circuit components, the ability to maintain control of a region of interest in spite of changes in ongoing neural activity will be important for disambiguating function within networks. Closed-loop stimulation strategies are ideal for control that is robust to such changes

  9. Developing optimal input design strategies in cancer systems biology with applications to microfluidic device engineering.

    Science.gov (United States)

    Menolascina, Filippo; Bellomo, Domenico; Maiwald, Thomas; Bevilacqua, Vitoantonio; Ciminelli, Caterina; Paradiso, Angelo; Tommasi, Stefania

    2009-10-15

    Mechanistic models are becoming more and more popular in Systems Biology; identification and control of models underlying biochemical pathways of interest in oncology is a primary goal in this field. Unfortunately the scarce availability of data still limits our understanding of the intrinsic characteristics of complex pathologies like cancer: acquiring information for a system understanding of complex reaction networks is time consuming and expensive. Stimulus response experiments (SRE) have been used to gain a deeper insight into the details of biochemical mechanisms underlying cell life and functioning. Optimisation of the input time-profile, however, still remains a major area of research due to the complexity of the problem and its relevance for the task of information retrieval in systems biology-related experiments. We have addressed the problem of quantifying the information associated to an experiment using the Fisher Information Matrix and we have proposed an optimal experimental design strategy based on evolutionary algorithm to cope with the problem of information gathering in Systems Biology. On the basis of the theoretical results obtained in the field of control systems theory, we have studied the dynamical properties of the signals to be used in cell stimulation. The results of this study have been used to develop a microfluidic device for the automation of the process of cell stimulation for system identification. We have applied the proposed approach to the Epidermal Growth Factor Receptor pathway and we observed that it minimises the amount of parametric uncertainty associated to the identified model. A statistical framework based on Monte-Carlo estimations of the uncertainty ellipsoid confirmed the superiority of optimally designed experiments over canonical inputs. The proposed approach can be easily extended to multiobjective formulations that can also take advantage of identifiability analysis. Moreover, the availability of fully automated

  10. Guiding Design of University STEM Courses Based on Gifted Status and Strategies for Success

    Science.gov (United States)

    Hawthorne Allen, A. M.

    2016-12-01

    Starting from general population statistics and the self-selection of STEM majors by students, it can be concluded that science classes have a population of students trending towards the gifted, regardless of academic institution and admissions selectivity. On average, upper level and graduate STEM courses have an increasingly larger fraction of gifted students. I propose that the average level of giftedness of the students within a course serves as an overriding characteristic that is more significant than other demographic variables. Using this model when designing a STEM course can lead to more successful learning outcomes. In 1991, the Columbus Group defined giftedness as "asynchronous development in which advanced cognitive abilities and heightened intensity combine to create inner experiences and awareness than are qualitatively different from the norm." These gifted characteristics are fundamentally innate lifelong traits that persist beyond K-12 designations and into our college classrooms. As this broader understanding of giftedness has emerged, myths and stereotypes in prior literature have also become clearer. Understanding and naming these myths can better impact our teaching effectiveness. While the diversity of gifted populations makes generalization difficult, gifted individuals can be described as having the following: asynchronous development, increased perceptivity, high sensitivity, perfectionism, and intensity. Several levels of giftedness have been identified on the basis of IQ scores or innate characteristics from birth. In addition, students who are twice-exceptional are yet another subpopulation present in our classes. If the average gifted level of STEM majors is higher than the norm population for a typical level of education, then understanding the characteristics of the subpopulations and the impact on classroom dynamics is essential. This directly impacts our STEM teaching pedagogy and style if productive learning outcomes are to be

  11. An instrument design and sample strategy for measuring soil respiration in the coastal temperate rain forest

    Science.gov (United States)

    Nay, S. M.; D'Amore, D. V.

    2009-12-01

    The coastal temperate rainforest (CTR) along the northwest coast of North America is a large and complex mosaic of forests and wetlands located on an undulating terrain ranging from sea level to thousands of meters in elevation. This biome stores a dynamic portion of the total carbon stock of North America. The fate of the terrestrial carbon stock is of concern due to the potential for mobilization and export of this store to both the atmosphere as carbon respiration flux and ocean as dissolved organic and inorganic carbon flux. Soil respiration is the largest export vector in the system and must be accurately measured to gain any comprehensive understanding of how carbon moves though this system. Suitable monitoring tools capable of measuring carbon fluxes at small spatial scales are essential for our understanding of carbon dynamics at larger spatial scales within this complex assemblage of ecosystems. We have adapted instrumentation and developed a sampling strategy for optimizing replication of soil respiration measurements to quantify differences among spatially complex landscape units of the CTR. We start with the design of the instrument to ease the technological, ergonomic and financial barriers that technicians encounter in monitoring the efflux of CO2 from the soil. Our sampling strategy optimizes the physical efforts of the field work and manages for the high variation of flux measurements encountered in this difficult environment of rough terrain, dense vegetation and wet climate. Our soil respirometer incorporates an infra-red gas analyzer (LiCor Inc. LI-820) and an 8300 cm3 soil respiration chamber; the device is durable, lightweight, easy to operate and can be built for under $5000 per unit. The modest unit price allows for a multiple unit fleet to be deployed and operated in an intensive field monitoring campaign. We use a large 346 cm2 collar to accommodate as much micro spatial variation as feasible and to facilitate repeated measures for tracking

  12. An All-Freeze-Casting Strategy to Design Typographical Supercapacitors with Integrated Architectures.

    Science.gov (United States)

    Wang, Qingrong; Wang, Xinyu; Wan, Fang; Chen, Kena; Niu, Zhiqiang; Chen, Jun

    2018-06-01

    The emergence of flexible and wearable electronics has raised the demand for flexible supercapacitors with accurate sizes and aesthetic shapes. Here, a strategy is developed to prepare flexible all-in-one integrated supercapacitors by combining all-freeze-casting with typography technique. The continuous seamless connection of all-in-one supercapacitor devices enhances the load and/or electron transfer capacity and avoids displacing and detaching between their neighboring components at bending status. Therefore, such a unique structure of all-in-one integrated devices is beneficial for retaining stable electrochemical performance at different bending levels. More importantly, the sizes and aesthetic shapes of integrated supercapacitors could be controlled by the designed molds, like type matrices of typography. The molds could be assembled together and typeset randomly, achieving the controllable construction and series and/or parallel connection of several supercapacitor devices. The preparation of flexible integrated supercapacitors will pave the way for assembling programmable all-in-one energy storage devices into highly flexible electronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Culturally sensitive strategies designed to target the silent epidemic of hepatitis B in a Filipino community.

    Science.gov (United States)

    Marineau, Michelle; Tice, Alan D; Taylor-Garcia, David; Akinaka, Kenneth T; Lusk, Heather; Ona, Fernando

    2007-06-01

    Hepatitis B is frequent in the Philippines. A high rate of immigration to the United States has brought many Filipinos with infections who are asymptomatic yet will go on to develop liver cancer and cirrhosis unless diagnose and evaluated. Interventions are necessary to educate this ethnic community, identify those infected, and offer therapy. In an effort to reach this high risk population in Hawai'i an intervention program was designed to address the silent epidemic of hepatitis. Ethnic barriers were crossed through involvement of trusted, key stakeholders and individuals within the Filipino health care and church communities, along with groups that had joint missions to address viral hepatitis. After extensive planning and meetings with faith-based organizations and health care providers in the Filipino community, it was decided to hold a community health fair in the Filipino community to provide culturally appropriate health information and services. More than 500 individuals attended the health fair; 167 participated in a survey and were tested for hepatitis B. Significant knowledge gaps were found in relation to risk factors, prevention strategies, and transmission. Five individuals tested positive; all were immigrants and did not know of their disease. The objective to educate people and test them for hepatitis was successful through utilizing ethnic community leaders, religious organizations, health care professionals, and a collaborative health fair.

  14. New Insights to Clathrin and Adaptor Protein 2 for the Design and Development of Therapeutic Strategies

    Directory of Open Access Journals (Sweden)

    Ebbe Toftgaard Poulsen

    2015-12-01

    Full Text Available The Amyloid Precursor Protein (APP has been extensively studied for its role as the precursor of the β-amyloid protein (Aβ in Alzheimer’s disease (AD. However, our understanding of the normal function of APP is still patchy. Emerging evidence indicates that a dysfunction in APP trafficking and degradation can be responsible for neuronal deficits and progressive degeneration in humans. We recently reported that the Y682 mutation in the 682YENPTY687 domain of APP affects its binding to specific adaptor proteins and leads to its anomalous trafficking, to defects in the autophagy machinery and to neuronal degeneration. In order to identify adaptors that influence APP function, we performed pull-down experiments followed by quantitative mass spectrometry (MS on hippocampal tissue extracts of three month-old mice incubated with either the 682YENPTY687 peptide, its mutated form, 682GENPTY687 or its phosphorylated form, 682pYENPTY687. Our experiments resulted in the identification of two proteins involved in APP internalization and trafficking: Clathrin heavy chain (hc and its Adaptor Protein 2 (AP-2. Overall our results consolidate and refine the importance of Y682 in APP normal functions from an animal model of premature aging and dementia. Additionally, they open the perspective to consider Clathrin hc and AP-2 as potential targets for the design and development of new therapeutic strategies.

  15. Transformation by design: nursing workforce innovation and reduction strategies in turbulent times of change.

    Science.gov (United States)

    Palazzo, Mary O

    2015-01-01

    The evolution of care delivery from an acute care and inpatient standard to the outpatient setting and health promotion model is generating the need for innovative workforce and infrastructure adjustments to meet the new paradigm of population health management. Successful transformation of the nursing workforce necessitates a positive style of thinking that addresses rational concerns during times of difficult transition. Nurse leaders are called to recognize and appreciate the strengths of the nursing workforce by involving them in the course of change through collaboration, planning, and discussion. One unique way to plan and develop new care delivery models is to adopt the framework used in health facility planning and design for new services, units, or hospitals. This framework is flexible and can be adjusted easily to meet the objectives of a small nursing workforce innovation project or expanded to encompass the needs of a large-scale hospital transformation. Structured questioning further helps the team to identify barriers to care and allows for the development of new concepts that are objective and in accord with evidence-based practice and data. This article explores the advantages and disadvantages of implementing innovative workforce redesign and workforce reduction strategies.

  16. Landscape design strategies for post-disaster reconstructions based on traditional ethical wisdom

    Science.gov (United States)

    Yi, Shouli; Hu, Di; Gao, Suping; Lei, Ting; Chen, Qibin

    2018-03-01

    In the face of the black swan events which frequently happened globally, I take the earthquake of Ya'an, happened at 4.20 in Sichuan, as an example of my subject. The results indicate that the social responsibility of landscape architects is a post-disaster reconstruction of a material and spiritual homeland for victims and mental care for individuals, which specifically reflected in the process of rebuilding victims' sense of security. The reconstruction of a sense of security must follow certain ethics and moralities which embody the ecological wisdom. We take a typical case of Ya'an Lushan Snow Mountain Village-the earthquake distress area, we found the incidence of disease was up to 68.6% through the PTSD analysis, indicating the overall absence of a sense of security. To solve the problem and reconstruct people's mental and material homeland, the article discussed the strategies and solutions to post-disaster landscape design based on traditional ethical wisdom.

  17. Control Law Design for Propofol Infusion to Regulate Depth of Hypnosis: A Nonlinear Control Strategy

    Directory of Open Access Journals (Sweden)

    Ali Khaqan

    2016-01-01

    Full Text Available Maintaining the depth of hypnosis (DOH during surgery is one of the major objectives of anesthesia infusion system. Continuous administration of Propofol infusion during surgical procedures is essential but increases the undue load of an anesthetist in operating room working in a multitasking setup. Manual and target controlled infusion (TCI systems are not good at handling instabilities like blood pressure changes and heart rate variability arising due to interpatient variability. Patient safety, large interindividual variability, and less postoperative effects are the main factors to motivate automation in anesthesia. The idea of automated system for Propofol infusion excites the control engineers to come up with a more sophisticated and safe system that handles optimum delivery of drug during surgery and avoids postoperative effects. In contrast to most of the investigations with linear control strategies, the originality of this research work lies in employing a nonlinear control technique, backstepping, to track the desired hypnosis level of patients during surgery. This effort is envisioned to unleash the true capabilities of this nonlinear control technique for anesthesia systems used today in biomedical field. The working of the designed controller is studied on the real dataset of five patients undergoing surgery. The controller tracks the desired hypnosis level within the acceptable range for surgery.

  18. Optimizing Oral Bioavailability in Drug Discovery: An Overview of Design and Testing Strategies and Formulation Options.

    Science.gov (United States)

    Aungst, Bruce J

    2017-04-01

    For discovery teams working toward new, orally administered therapeutic agents, one requirement is to attain adequate systemic exposure after oral dosing, which is best accomplished when oral bioavailability is optimized. This report summarizes the bioavailability challenges currently faced in drug discovery, and the design and testing methods and strategies currently utilized to address the challenges. Profiling of discovery compounds usually includes separate assessments of solubility, permeability, and susceptibility to first-pass metabolism, which are the 3 most likely contributors to incomplete oral bioavailability. An initial assessment of absorption potential may be made computationally, and high throughput in vitro assays are typically performed to prioritize compounds for in vivo studies. The initial pharmacokinetic study is a critical decision point in compound evaluation, and the importance of the effect the dosing vehicle or formulation can have on oral bioavailability, especially for poorly water soluble compounds, is emphasized. Dosing vehicles and bioavailability-enabling formulations that can be used for discovery and preclinical studies are described. Optimizing oral bioavailability within a chemical series or for a lead compound requires identification of the barrier limiting bioavailability, and methods used for this purpose are outlined. Finally, a few key guidelines are offered for consideration when facing the challenges of optimizing oral bioavailability in drug discovery. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  19. Designing Multidimensional Policing Strategy And Organization: Towards A Synthesis Of Professional And Community Police Models

    Directory of Open Access Journals (Sweden)

    Suve Priit

    2015-06-01

    Full Text Available In this article we analyse professional police and community policing in view of professionalism, strategy and structures. We aim to find ways for synthesizing these models that are usually seen as incompatible. Unlike many earlier studies of police organizations or strategies, we view strategies in the organization at the corporate, functional and operational levels, and argue that by combining them with functional and divisional principles of structuring, it is possible to place professional strategy at the core of policing, while using the community policing strategy mainly as a component part of the strategy in the framework of divisional organization. This way it is possible to avoid the risk of alienating police from the community and to ensure the successful implementation of corporate strategy through providing professional police units that perform the narrow functions, with quick and adequate information from the community.

  20. McGuire snubber elimination program

    International Nuclear Information System (INIS)

    Cloud, R.L.; Leung, J.S.M.; Taylor, W.H.; Morgan, R.L. Jr.

    1993-01-01

    An engineering program has been initiated at McGuire Nuclear Stations 1 and 2 to eliminate all existing snubbers. The elimination is achieved by replacing existing snubbers with limit stop pipe supports. The program establishes plant-wide modification procedures for one-to-one substitution under the 10 CFR 50.59 requirement. Nuclear Regulatory Commission (NRC) acceptance is based on the results of both comparison analyses and the hardware implementation of sample piping systems at McGuire nuclear stations. Experimental results obtained on shake table testing and from the NRC sponsored HDR research program are also used to formulate the technical basis and design procedures for plant-wide implementation of the snubber replacement effort. The overall program plan is for nearly 3,000 snubbers to be replaced in phases consistent with the plant scheduled outages. Duke Power estimates the program, when completed, will maintain ALARA, improve reliability, and reduce plant operating costs

  1. Rayleigh Instability-Assisted Satellite Droplets Elimination in Inkjet Printing.

    Science.gov (United States)

    Yang, Qiang; Li, Huizeng; Li, Mingzhu; Li, Yanan; Chen, Shuoran; Bao, Bin; Song, Yanlin

    2017-11-29

    Elimination of satellite droplets in inkjet printing has long been desired for high-resolution and precision printing of functional materials and tissues. Generally, the strategy to suppress satellite droplets is to control ink properties, such as viscosity or surface tension, to assist ink filaments in retracting into one drop. However, this strategy brings new restrictions to the ink, such as ink viscosity, surface tension, and concentration. Here, we report an alternative strategy that the satellite droplets are eliminated by enhancing Rayleigh instability of filament at the break point to accelerate pinch-off of the droplet from the nozzle. A superhydrophobic and ultralow adhesive nozzle with cone morphology exhibits the capability to eliminate satellite droplets by cutting the ink filament at breakup point effectively. As a result, the nozzles with different sizes (10-80 μm) are able to print more inks (1 printing electronics and biotechnologies.

  2. A strategy to apply a graded approach to a new research reactor I and C design

    International Nuclear Information System (INIS)

    Suh, Yong Suk; Park, Jae Kwan; Kim, Taek Kyu; Bae, Sang Hoon; Baang, Dane; Kim, Young Ki

    2012-01-01

    utilization, the safety requirements for RRs may not be required to be applied to every RR in the same way. DS351 also states that the way in which the requirements are demonstrated to be met for a multipurpose and high power RR might be very different from the way in which the requirements are demonstrated to be met for a RR with very low power and very low associated radiological hazards to the facility staff, the public, and the environment. The GA should not compromise safety or waive the safety requirements. The GA is not a quantitative method but rather a qualitative method to determine the scope and level of application of the safety requirements to the design of a RR. It adopts a systematic approach and engineering judgment for the determination. The GA is applicable in all stages of the RR lifetime. Any grading during the lifetime should ensure that safety functions are maintained and that there are no radiological hazards to the operators and public. The grading activities should be based on a safety analysis, regulatory requirements, and engineering judgment. In DS351, the GA activities consist of two steps: 1) categorizing a facility into a range of the highest to the lowest risk, which is an initial grading of the facility, and 2) grading the system, structure, and components important to safety, which is a more detailed grading of the facility. As an example of the GA, fewer inspections and hold points for a 100 kW RR than those for a 5 MW RR can be determined. For the application of the GA to the I and C design of an RR, Rah man proposed the GA to develop the digital MMIS (Man Machine Interface System) for RRs regarding cyber security, software V and V, and human factors engineering. However, it did not show the specific design decisions. Suh presented the overall I and C architecture for the NRR, but it has a lack of rationale for the design decision making. This paper presents a strategy to make a design decision for NRR I and C systems. According to the

  3. A strategy to apply a graded approach to a new research reactor I and C design

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Yong Suk; Park, Jae Kwan; Kim, Taek Kyu; Bae, Sang Hoon; Baang, Dane; Kim, Young Ki [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    utilization, the safety requirements for RRs may not be required to be applied to every RR in the same way. DS351 also states that the way in which the requirements are demonstrated to be met for a multipurpose and high power RR might be very different from the way in which the requirements are demonstrated to be met for a RR with very low power and very low associated radiological hazards to the facility staff, the public, and the environment. The GA should not compromise safety or waive the safety requirements. The GA is not a quantitative method but rather a qualitative method to determine the scope and level of application of the safety requirements to the design of a RR. It adopts a systematic approach and engineering judgment for the determination. The GA is applicable in all stages of the RR lifetime. Any grading during the lifetime should ensure that safety functions are maintained and that there are no radiological hazards to the operators and public. The grading activities should be based on a safety analysis, regulatory requirements, and engineering judgment. In DS351, the GA activities consist of two steps: 1) categorizing a facility into a range of the highest to the lowest risk, which is an initial grading of the facility, and 2) grading the system, structure, and components important to safety, which is a more detailed grading of the facility. As an example of the GA, fewer inspections and hold points for a 100 kW RR than those for a 5 MW RR can be determined. For the application of the GA to the I and C design of an RR, Rah man proposed the GA to develop the digital MMIS (Man Machine Interface System) for RRs regarding cyber security, software V and V, and human factors engineering. However, it did not show the specific design decisions. Suh presented the overall I and C architecture for the NRR, but it has a lack of rationale for the design decision making. This paper presents a strategy to make a design decision for NRR I and C systems. According to the

  4. Design of Concept of Sustainable Marketing Communication Strategy for a Ideal Industrial Enterprise and Practical Applications of this Concept

    Science.gov (United States)

    Šujaková, Monika; Golejová, Simona; Sakál, Peter

    2017-09-01

    In the contribution the authors deal with the design and use of a sustainable marketing communication strategy of an ideal industrial enterprise in the Slovak Republic. The concept of an ideal enterprise is designed to increase the enterprise's sustainable competitiveness through the formation of a corporate image. In the framework of the research, the practical application of the draft concept was realized through a semi-structured interview in the form of propositional logic.

  5. Design Research and the Solo Higher Degree Research Student: Strategies to Embed Trustworthiness and Validity into the Research Design

    Science.gov (United States)

    Kennedy-Clark, Shannon

    2012-01-01

    This paper puts forward a set of criteria for ensuring trustworthiness in design research studies undertaken by Higher Degree Research (HDR) students. Design research is aimed at exploring educational problems and refining theory and practice by defining a pedagogical outcome and is a methodological approach often associated with the Learning…

  6. Contending stigma in product design : Using insights from social psychology as a stepping stone for design strategies

    NARCIS (Netherlands)

    Vaes, K.R.V.; Stappers, P.J.; Standaert, A.; Desager, K.

    2012-01-01

    Assistive, protective or medical products that are visibly worn or used in proximity to the human body can have an emotional impact on their users and bystanders. In his design effort it is important for a designer to be mindful of the potential stigma a product might elicit. The identity threat

  7. Investigating Peer Review as an Intentional Learning Strategy to Foster Collaborative Knowledge-Building in Students of Instructional Design

    Science.gov (United States)

    Brill, Jennifer M.; Hodges, Charles B.

    2011-01-01

    Peer review has been advocated for as an intentional strategy to support the knowledge and skill attainment of adult learners preparing for professional practice, including those students preparing for instructional design and technology practice. The purposes of this article are to discuss the practical application of peer review as an…

  8. Designing and Evaluating Tutoring Feedback Strategies for Digital Learning Environments on the Basis of the Interactive Tutoring Feedback Model

    Science.gov (United States)

    Narciss, Susanne

    2013-01-01

    This paper describes the interactive tutoring feedback model (ITF-model; Narciss, 2006; 2008), and how it can be applied to the design and evaluation of feedback strategies for digital learning environments. The ITF-model conceptualizes formative tutoring feedback as a multidimensional instructional activity that aims at contributing to the…

  9. Improving the Quality of Online Discussion: The Effects of Strategies Designed Based on Cognitive Load Theory Principles

    Science.gov (United States)

    Darabi, Aubteen; Jin, Li

    2013-01-01

    This article focuses on heavy cognitive load as the reason for the lack of quality associated with conventional online discussion. Using the principles of cognitive load theory, four online discussion strategies were designed specifically aiming at reducing the discussants' cognitive load and thus enhancing the quality of their online discussion.…

  10. Reactor design and operation strategies for a large-scale packed-bed CLC power plant with coal syngas

    NARCIS (Netherlands)

    Spallina, V.; Chiesa, P.; Martelli, E; Gallucci, F.; Romano, M.C.; Lozza, G.; Sint Annaland, van M.

    2015-01-01

    This paper deals with the design and operation strategies of dynamically operated packed-bed reactors (PBRs) of a chemical looping combustion (CLC) system included in an integrated gasification combined cycle (IGCC) for electric power generation with low CO2 emission from coal. The CLC reactors,

  11. Random sampling or geostatistical modelling? Choosing between design-based and model-based sampling strategies for soil (with discussion)

    NARCIS (Netherlands)

    Brus, D.J.; Gruijter, de J.J.

    1997-01-01

    Classical sampling theory has been repeatedly identified with classical statistics which assumes that data are identically and independently distributed. This explains the switch of many soil scientists from design-based sampling strategies, based on classical sampling theory, to the model-based

  12. The de Bono LAMS Sequence Series: Template Designs as Knowledge-Mobilising Strategy for 21st Century Higher Education

    Science.gov (United States)

    Dobozy, Eva

    2012-01-01

    In this paper, the five interlocking de Bono LAMS sequences are introduced as a new form of generic template designs. This transdisciplinary knowledge-mobilising strategy is based on Edward de Bono's attention-directing ideas and thinking skills, commonly known as the CoRT tools. The development of the de Bono LAMS sequence series is an important…

  13. New strategy for the optimal design and manufacture of high performance milling heads

    Directory of Open Access Journals (Sweden)

    Bustillo, A.

    2011-12-01

    Full Text Available High-performance mechanical-transmission heads are one of the most complex, costly and problematic parts of a milling machine, owing to the large amount of piping required for transporting fluids and to the high level of mechanical performance that is required from them. This study proposes a strategy for optimising the design and manufacture of head bodies by using aluminium alloys and by integrating tubular stainless steel inserts in the casting of the head. These tubular inserts that are integrated into the aluminium mass are an alternative to cooling conduits currently made by machine drilling. As demonstrated in the experimental validation of the first prototype, the new method has created a design that retains the same mechanical performance, increases its reliability and reduces the weight of the milling machine’s moving parts.

    Los cabezales de transmisión mecánica de altas prestaciones son una de las partes más complejas, costosas y problemáticas de una maquina fresadora. Esto es debido a la gran cantidad de canalizaciones para la transmisión de fluidos que deben de contener y a las altas prestaciones mecánicas que se les exigen. En este trabajo se presenta una estrategia para optimizar el diseño y la fabricación de los cuerpos de estos cabezales basada en la incorporación de aleaciones de aluminio y la inclusión de insertos tubulares de acero en la propia fundición que conforma el cabezal. Los insertos tubulares sustituyen a los canales de refrigeración realizados actualmente por taladros de mecanizado y quedan integrados en la masa de aluminio. La nueva metodología ha permitido realizar un diseño que mantiene las prestaciones mecánicas, aumenta la fiabilidad y reduce la masa de estos elementos móviles de fresadoras como ha demostrado la validación experimental de un primer prototipo.

  14. A Case Study of Engaging Hard-to-Reach Participants in the Research Process: Community Advisors on Research Design and Strategies (CARDS)®.

    Science.gov (United States)

    Kaiser, Betty L; Thomas, Gay R; Bowers, Barbara J

    2017-02-01

    Lack of diversity among study participants in clinical research limits progress in eliminating health disparities. The engagement of lay stakeholders, such as patient or community advisory boards (CABs), has the potential to increase recruitment and retention of underrepresented groups by providing a structure for gathering feedback on research plans and materials from this target population. However, many CABs intentionally recruit prominent stakeholders who are connected to or comfortable with research and academia and thus may not accurately represent the perspectives of underrepresented groups who have been labeled hard-to-reach, including racial minorities and low-income or low-literacy populations. We developed a partnership between the University of Wisconsin-Madison School of Nursing and two community centers to deliberately engage hard-to-reach people in two lay advisory groups, the Community Advisors on Research Design and Strategies (CARDS)®. Community center staff recruited the CARDS from center programs, including parenting and childcare programs, women's support groups, food pantries, and senior meal programs. The CARDS model differs from other CABs in its participants, processes, and outcomes. Since 2010, the CARDS have met monthly with nurses and other researchers, helping them understand how research processes and the language, tone, appearance, and organization of research materials can discourage people from enrolling in clinical studies. We have successfully used the CARDS model to bring hard-to-reach populations into the research process and have sustained their participation. The model represents a promising strategy for increasing the diversity of participants in clinical research. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  15. Hoechst tagging: a modular strategy to design synthetic fluorescent probes for live-cell nucleus imaging.

    Science.gov (United States)

    Nakamura, Akinobu; Takigawa, Kazumasa; Kurishita, Yasutaka; Kuwata, Keiko; Ishida, Manabu; Shimoda, Yasushi; Hamachi, Itaru; Tsukiji, Shinya

    2014-06-11

    We report a general strategy to create small-molecule fluorescent probes for the nucleus in living cells. Our strategy is based on the attachment of the DNA-binding Hoechst compound to a fluorophore of interest. Using this approach, simple fluorescein, BODIPY, and rhodamine dyes were readily converted to novel turn-on fluorescent nucleus-imaging probes.

  16. Establishing Design Strategies and an Assessment Tool of Home Appliances to Promote Sustainable Behavior for the New Poor

    Directory of Open Access Journals (Sweden)

    Jui-Che Tu

    2018-05-01

    Full Text Available Environmental benefits related to home appliance life cycles depend on how these products are used. Designing home appliances that promote sustainable behavior is an effective way to reduce environmental impacts. This study aimed to increase relevant opportunities for promoting sustainable behavior practices on the new poor through home appliances, which is rarely discussed in the fields of design for sustainable behavior (DfSB and product design. In particular, relevant assessment tools or indicators are lacking in DfSB, and people’s use of home appliances is generally unsustainable. Therefore, repertory grid technology was used to understand the perceptions of the new poor, develop an assessment tool, and construct design strategies for home appliances that promote sustainable behavior. Data were collected from the new poor and from designers. Through cluster and principal component analyses, three strategy types were proposed that corresponded to different product features, suggestions, and guidance. In addition, the effectiveness and potential of an assessment tool were demonstrated using the Wilcoxon rank test. The findings could be used by designers, retailers, and green marketers to propose effective product design programs that promote sustainable behavior of the new poor during product use.

  17. Networks of Decision-Making and Communicating Agents: A New Methodology for Design and Evaluation of Organizational Strategies and Heterarchical Structures

    National Research Council Canada - National Science Library

    Levchuk, Georgiy M; Yu, Feili; Levchuk, Yuri; Pattipati, Krishna R

    2005-01-01

    .... They present a methodology to design mission-based strategies and novel heterarchical organizational structures based on exploring information/command transfer and processing in the organizations...

  18. How To Eliminate Narcissism Overnight

    Science.gov (United States)

    2011-01-01

    The Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition appears likely to eliminate the diagnosis of narcissistic personality disorder. There are significant problems with the discriminant validity of the current narcissistic personality disorder critiera set; furthermore, the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition's narrow focus on “grandiosity” probably contributes to the wide disparity between low narcissistic personality disorder prevalence rates in epidemiological studies and high rates of narcissistic personality disorder in clinical practice. Nevertheless, the best course of action may be to refine the narcissistic personality disorder criteria, followed by careful field testing and a search for biomarkers, rather than wholesale elimination of the narcissistic personality disorder category. The construct of “malignant narcissism” is also worthy of more intense empirical investigation. PMID:21468294

  19. Cost Control Strategies for Zero Energy Buildings: High-Performance Design and Construction on a Budget (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    There is mounting evidence that zero energy can, in many cases, be achieved within typical construction budgets. To ensure that the momentum behind zero energy buildings and other low-energy buildings will continue to grow, this guide assembles recommendations for replicating specific successes of early adopters who have met their energy goals while controlling costs. Contents include: discussion of recommended cost control strategies, which are grouped by project phase (acquisition and delivery, design, and construction) and accompanied by industry examples; recommendations for balancing key decision-making factors; and quick reference tables that can help teams apply strategies to specific projects.

  20. The Design of the M-B-Quadro Optical Switch and Its Access Control Strategies

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    This paper proposes a new simple contention resolution switching architecture, M-B-Quadro, and its underlying access control strategies. By incorporating delay and buffer lines, the switching node can effectively obtain very low packet deflection probability.

  1. Design of a testing strategy using non-animal based test methods: lessons learnt from the ACuteTox project.

    Science.gov (United States)

    Kopp-Schneider, Annette; Prieto, Pilar; Kinsner-Ovaskainen, Agnieszka; Stanzel, Sven

    2013-06-01

    In the framework of toxicology, a testing strategy can be viewed as a series of steps which are taken to come to a final prediction about a characteristic of a compound under study. The testing strategy is performed as a single-step procedure, usually called a test battery, using simultaneously all information collected on different endpoints, or as tiered approach in which a decision tree is followed. Design of a testing strategy involves statistical considerations, such as the development of a statistical prediction model. During the EU FP6 ACuteTox project, several prediction models were proposed on the basis of statistical classification algorithms which we illustrate here. The final choice of testing strategies was not based on statistical considerations alone. However, without thorough statistical evaluations a testing strategy cannot be identified. We present here a number of observations made from the statistical viewpoint which relate to the development of testing strategies. The points we make were derived from problems we had to deal with during the evaluation of this large research project. A central issue during the development of a prediction model is the danger of overfitting. Procedures are presented to deal with this challenge. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. Eliminating the Neglected Tropical Diseases: Translational Science and New Technologies.

    Directory of Open Access Journals (Sweden)

    Peter J Hotez

    2016-03-01

    Full Text Available Today, the World Health Organization recognizes 17 major parasitic and related infections as the neglected tropical diseases (NTDs. Despite recent gains in the understanding of the nature and prevalence of NTDs, as well as successes in recent scaled-up preventive chemotherapy strategies and other health interventions, the NTDs continue to rank among the world's greatest global health problems. For virtually all of the NTDs (including those slated for elimination under the auspices of a 2012 London Declaration for NTDs and a 2013 World Health Assembly resolution [WHA 66.12], additional control mechanisms and tools are needed, including new NTD drugs, vaccines, diagnostics, and vector control agents and strategies. Elimination will not be possible without these new tools. Here we summarize some of the key challenges in translational science to develop and introduce these new technologies in order to ensure success in global NTD elimination efforts.

  3. How does a change in the control room design affect diagnostic strategies in nuclear power plants?

    International Nuclear Information System (INIS)

    Kim, Dong Young; Kim, Jonghyun

    2014-01-01

    Recently, main control rooms have been considerably changed by modern computer techniques. Some of the features that distinguish digital control rooms from conventional, analog rooms in nuclear power plants include advanced alarm systems, graphic information display systems, computerized procedure systems, and soft control. These features can bring changes in operator tasks, changing the characteristics of tasks or creating new tasks for operators. It is especially expected that these features may bring out changes in the operator's diagnostic tasks and strategies in a digital control room as compared with an analog control room. This study investigates the differences in the operator's diagnostic tasks and strategies in analog and digital control rooms. This study also attempts to evaluate how new systems in a digital control room affect diagnostic strategies. Three different approaches, which are complementary, are used to identify diagnostic strategies in the digital control room and in the analog control room: (1) observation in the simulator, (2) interview with operators, and (3) a literature review. The results show that the digital control room introduces new diagnosis strategies compared with the analog control room while also changing the characteristics of the strategies, mostly by gaining more support from the computerized system. (author)

  4. Study and Practice of Design Strategy%设计策略的思考与实践

    Institute of Scientific and Technical Information of China (English)

    刘方

    2015-01-01

    在欧美国家,工业设计深入参与到策略领域,并从总体战略、业务、产品等多个层面推动策略的创新。设计策略是工业设计发展的最新成果之一,其深度融合了商业与设计的优点,具有区别于传统策略的显著特点,更加适应以体验经济和互联网模式为代表的新经济的需求。本文以笔者经历的设计策略案例出发,探讨设计策略的基本特征和实践经验,并得出结论:在中国,设计策略同样具有现实意义与价值,它不仅可以帮助中国企业开展转型,更可以帮助其理性面对新经济形势下的挑战。%In western countries, industrial design has deeply involved in strategic areas, and promoted innovative strategies from multiple levels overall strategy, business and products. Design strategy is one of the latest achievements in the development of industrial design, which deeply combines the advantages of business and design, has a notable feature different from the traditional strategy, and it can be more adapt to the demands on experience economy and Internet model represented by the new economic situation. In this paper, through the case of personal experience, the author study the basic features and practical experience in design strategy, and conclude: In China, design strategy has the real meaning and value as well, which can not only support the business transformation of local company, but also help them more rationally face the challenge of new economy.

  5. Energy-Performance-Based Design-Build Process: Strategies for Procuring High-Performance Buildings on Typical Construction Budgets: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Scheib, J.; Pless, S.; Torcellini, P.

    2014-08-01

    NREL experienced a significant increase in employees and facilities on our 327-acre main campus in Golden, Colorado over the past five years. To support this growth, researchers developed and demonstrated a new building acquisition method that successfully integrates energy efficiency requirements into the design-build requests for proposals and contracts. We piloted this energy performance based design-build process with our first new construction project in 2008. We have since replicated and evolved the process for large office buildings, a smart grid research laboratory, a supercomputer, a parking structure, and a cafeteria. Each project incorporated aggressive efficiency strategies using contractual energy use requirements in the design-build contracts, all on typical construction budgets. We have found that when energy efficiency is a core project requirement as defined at the beginning of a project, innovative design-build teams can integrate the most cost effective and high performance efficiency strategies on typical construction budgets. When the design-build contract includes measurable energy requirements and is set up to incentivize design-build teams to focus on achieving high performance in actual operations, owners can now expect their facilities to perform. As NREL completed the new construction in 2013, we have documented our best practices in training materials and a how-to guide so that other owners and owner's representatives can replicate our successes and learn from our experiences in attaining market viable, world-class energy performance in the built environment.

  6. Impact of the WHO Technical Support Towards Malaria Elimination ...

    African Journals Online (AJOL)

    Background: Zambia's National Malaria Strategic Plan (NMSP) 2011-2016 aims to eliminate malaria by the year 2020. The WHO Country Office is supporting Zambia in its goal to attain this national target earlier than the global goal contained in Global Technical Strategy (GTS) 2016- 2030. WHO's focus is to accelerate ...

  7. poolHiTS: A Shifted Transversal Design based pooling strategy for high-throughput drug screening

    Directory of Open Access Journals (Sweden)

    Woolf Peter J

    2008-05-01

    Full Text Available Abstract Background A key goal of drug discovery is to increase the throughput of small molecule screens without sacrificing screening accuracy. High-throughput screening (HTS in drug discovery involves testing a large number of compounds in a biological assay to identify active compounds. Normally, molecules from a large compound library are tested individually to identify the activity of each molecule. Usually a small number of compounds are found to be active, however the presence of false positive and negative testing errors suggests that this one-drug one-assay screening strategy can be significantly improved. Pooling designs are testing schemes that test mixtures of compounds in each assay, thereby generating a screen of the whole compound library in fewer tests. By repeatedly testing compounds in different combinations, pooling designs also allow for error-correction. These pooled designs, for specific experiment parameters, can be simply and efficiently created using the Shifted Transversal Design (STD pooling algorithm. However, drug screening contains a number of key constraints that require specific modifications if this pooling approach is to be useful for practical screen designs. Results In this paper, we introduce a pooling strategy called poolHiTS (Pooled High-Throughput Screening which is based on the STD algorithm. In poolHiTS, we implement a limit on the number of compounds that can be mixed in a single assay. In addition, we show that the STD-based pooling strategy is limited in the error-correction that it can achieve. Due to the mixing constraint, we show that it is more efficient to split a large library into smaller blocks of compounds, which are then tested using an optimized strategy repeated for each block. We package the optimal block selection algorithm into poolHiTS. The MATLAB codes for the poolHiTS algorithm and the corresponding decoding strategy are also provided. Conclusion We have produced a practical version

  8. Design of a nonlinear backstepping control strategy of grid interconnected wind power system based PMSG

    Science.gov (United States)

    Errami, Y.; Obbadi, A.; Sahnoun, S.; Benhmida, M.; Ouassaid, M.; Maaroufi, M.

    2016-07-01

    This paper presents nonlinear backstepping control for Wind Power Generation System (WPGS) based Permanent Magnet Synchronous Generator (PMSG) and connected to utility grid. The block diagram of the WPGS with PMSG and the grid side back-to-back converter is established with the dq frame of axes. This control scheme emphasises the regulation of the dc-link voltage and the control of the power factor at changing wind speed. Besides, in the proposed control strategy of WPGS, Maximum Power Point Tracking (MPPT) technique and pitch control are provided. The stability of the regulators is assured by employing Lyapunov analysis. The proposed control strategy for the system has been validated by MATLAB simulations under varying wind velocity and the grid fault condition. In addition, a comparison of simulation results based on the proposed Backstepping strategy and conventional Vector Control is provided.

  9. Design and evaluation of dynamic replication strategies for a high-performance data grid

    International Nuclear Information System (INIS)

    Ranganathan, K.; Foster, I.

    2001-01-01

    Physics experiments that generate large amounts of data need to be able to share it with researchers around the world. High performance grids facilitate the distribution of such data to geographically remote places. Dynamic replication can be used as a technique to reduce bandwidth consumption and access latency in accessing these huge amounts of data. The authors describe a simulation framework that we have developed to model a grid scenario, which enables comparative studies of alternative dynamic replication strategies. The authors present preliminary results obtained with this simulator, in which we evaluate the performance of six different replication strategies for three different kinds of access patterns. The simulation results show that the best strategy has significant savings in latency and bandwidth consumption if the access patterns contain a moderate amount of geographical locality

  10. Design and Implementation of a Control Strategy for Microgrid Containing Renewable Energy Generations and Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Mingchao Xia

    2013-01-01

    Full Text Available Large amount of such renewable energy generations as wind/photovoltaic generations directly connected to grid acting as distributed generations will cause control, protection, security, and safety problems. Microgrid, which has advantages in usage and control of distributed generations, is a promising approach to coordinate the conflict between distributed generations and the grid. Regarded as mobile power storages, batteries of electric vehicles can depress the fluctuation of power through the point of common coupling of microgrid. This paper presents a control strategy for microgrid containing renewable energy generations and electric vehicles. The control strategy uses current control for renewable energy generations under parallel-to-grid mode, and uses master-slave control under islanding mode. Simulations and laboratory experiments prove that the control strategy works well for microgrid containing renewable energy generations and electric vehicles and provides maximum power output of renewable energy and a stable and sustainable running under islanding mode.

  11. Designing Programme Implementation Strategies to Increase the Adoption and Use of Biosand Water Filters in Rural India

    Directory of Open Access Journals (Sweden)

    Tommy K.K. Ngai

    2014-06-01

    Full Text Available Low-cost household water treatment systems are innovations designed to improve the quality of drinking water at the point of use. This study investigates how an NGO can design appropriate programme strategies in order to increase the adoption and sustained use of household sand filters in rural India. A system dynamics computer model was developed and used to assess 18 potential programme strategies for their effectiveness in increasing filter use at two and ten years into the future, under seven scenarios of how the external context may plausibly evolve. The results showed that the optimal choice of strategy is influenced by the macroeconomic situation, donor funding, presence of alternative options, and the evaluation time frame. The analysis also revealed some key programme management challenges, including the trade-off between optimising short- or long-term gains, and counter-intuitive results, such as higher subsidy fund allocation leading to fewer filter distribution, and technology advances leading to fewer sales. This study outlines how an NGO can choose effective strategies in consideration of complex system interactions. This study demonstrated that small NGOs can dramatically increase their programme outcomes without necessarily increasing operational budget.

  12. Teaching Strategis Designed to Change the Undergraduate Experience for College Women Learning Chemistry

    Science.gov (United States)

    Khan, Samia

    A college for women has been cited as one of the most productive origins of female physical science doctorates in the United States. A case study was conducted to investigate teaching strategies that support the retention of women in the physical sciences, based on evidence from one of the college's most notable instructors and her teaching strategies. The strategies this teacher used included a personal "contract", confidence building techniques, and science internships. Data were collected from classroom documents, classroom observations, teacher interviews, student focus groups, student feedback sheets, Likert-response student surveys, and student final exams. Evidence from the Likert-response survey and focus groups suggested that the contract increased students' likelihood of success in the course and that confidence-building strategies improved students' confidence in their ability to succeed in science. An analysis of students' final exam scores indicated that student marks improved after the introduction of the aforementioned teaching innovations: 4% of students taking the same science course with the same teacher earned less than a C-, compared to a previous three-year average of 18% of students with below C- grades. In addition, notably fewer minority women dropped the course than they had in the past. The findings of this study suggest that this teacher's strategies may have played a part in retaining these women in the physical sciences. Based on the data, a theoretical model is proposed that suggests how switching or "fading" out of the course may have been addressed and how multiple teaching strategies can work in concert with each other to contribute to women's positive experiences in the physical sciences.

  13. The design, results and future development of the National Energy Strategy Environmental Analysis Model (NESEAM)

    International Nuclear Information System (INIS)

    Fisher, R.E.; Boyd, G.A.; Breed, W.S.

    1991-01-01

    The National Energy Strategy Environmental Model (NESEAM) has been developed to project emissions for the National Energy Strategy (NES). Two scenarios were evaluated for the NES, a Current Policy Base Case and a NES Action Case. The results from the NES Actions Case project much lower emissions than the Current Policy Base Case. Future enhancements to NESEAM will focus on fuel cycle analysis, including future technologies and additional pollutants to model. NESEAM's flexibility will allow it to model other future legislative issues. 7 refs., 4 figs., 2 tabs

  14. Analysis of the optimal design strategy of a magnetorheological smart structure

    International Nuclear Information System (INIS)

    Yang Likang; Duan Fubin; Eriksson, Anders

    2008-01-01

    The exploration of magnetorheological (MR) fluid applications involves many fields. During the phase of theory analysis and experimental investigations, most of the research has been in developing primary products, and the design method is becoming important in MR device design. To establish general design guidelines, not with the usual MR smart structure design method which just complies with the presented yield stress of smart materials, in this paper, an MR smart structure design method is presented according to the whole requirement of smart structure characteristics. In other words, the smart structure design method does not just execute its optimization according to the presented MR fluid features, and it can customize or select the properties of MR fluid obeying the whole system requirements. Besides the usual magnetic circuit design analysis, the MR fluid physical content, such as the volume fraction of particles, was incorporated into the design parameters of the products. At the same time, by utilizing the structural parameters, the response time of MR devices was considered by analyzing the time constant of electromagnetic coils inside the MR devices too. Additionally, the power consumption relevant to transient useful power was analyzed for structure design. Finally, based on the computation of the magnetic field in a finite element (COMSOL multiphysics), all these factors were illustrated in an MR fluid valve based on the results of a magnetic circuit design

  15. A model of human decision making in complex systems and its use for design of system control strategies

    International Nuclear Information System (INIS)

    Rasmussen, J.; Lind, M.

    1982-04-01

    The paper describes a model of operators' decision making in complex system control, based on studies of event reports and performance in control rooms. This study shows how operators base their decisions on knowledge of system properties at different levels of abstraction depending on their preception of the system's immediate control requirements. These levels correspond to the abstraction hierarchy including system purpose, functions, and physical details, which is generally used to describe a formal design process. In emergency situations the task of the operator is to design a suitabel control strategy for systems recovery, and the control systems designer should provide a man-machine interface, supporting the operator in identification of his task and in communication with the system at the level of abstraction corresponding to the immedite control requirement. A formalized representation of system properties in a multilevel flow model is described to provide a basis for an integrated control system design. (author)

  16. Planning Beyond Tactics: Towards a Military Application of the Philosophy of Design in the Formulation of Strategy

    Science.gov (United States)

    2008-05-22

    more importantly are, therefore, a priori).63 61 Positivism : The school of philosophy that claims that the only authentic knowledge is that which... quantitative substance to the emerging qualitative ideas. Tactics without Strategy as the Noise Before Defeat. Design is a verb and producing a...interventions, in order to enable the desired potentials that lead to the desired system state. Positivism . The school of philosophy that claims that

  17. A satellite digital controller or 'play that PID tune again, Sam'. [Position, Integral, Derivative feedback control algorithm for design strategy

    Science.gov (United States)

    Seltzer, S. M.

    1976-01-01

    The problem discussed is to design a digital controller for a typical satellite. The controlled plant is considered to be a rigid body acting in a plane. The controller is assumed to be a digital computer which, when combined with the proposed control algorithm, can be represented as a sampled-data system. The objective is to present a design strategy and technique for selecting numerical values for the control gains (assuming position, integral, and derivative feedback) and the sample rate. The technique is based on the parameter plane method and requires that the system be amenable to z-transform analysis.

  18. Packaging Design and Marketing Strategy of Cookie%饼干包装设计与营销策略

    Institute of Scientific and Technical Information of China (English)

    潘依华

    2015-01-01

    "The best selling product is the impression of the goods". Packaging is not only the outside protec-tion of the product, but also is a kind of marketing strategy. The quality of packaging design always impresses the effect of the advertising of the goods, and become one of the important factor in developing market. The packaging design strategy of cookie is a very logical creation progress in selling. So the research of packaging design and mar-keting strategy is meaningful to promoting market competitiveness of the cookie product.%"商品畅销的诀窍在于商品的印象."包装既是对产品的外在保护,更是一种营销策略,包装设计的好坏往往会影响到该产品的广告宣传效应,成为产品开拓市场的重要影响因素之一.饼干产品的包装设计策略是一个非常逻辑化的促销创意过程.因此,研究包装的设计及营销,对于提升饼干产品的市场竞争力具有重要的意义.

  19. Conservative strategy-based ensemble surrogate model for optimal groundwater remediation design at DNAPLs-contaminated sites

    Science.gov (United States)

    Ouyang, Qi; Lu, Wenxi; Lin, Jin; Deng, Wenbing; Cheng, Weiguo

    2017-08-01

    The surrogate-based simulation-optimization techniques are frequently used for optimal groundwater remediation design. When this technique is used, surrogate errors caused by surrogate-modeling uncertainty may lead to generation of infeasible designs. In this paper, a conservative strategy that pushes the optimal design into the feasible region was used to address surrogate-modeling uncertainty. In addition, chance-constrained programming (CCP) was adopted to compare with the conservative strategy in addressing this uncertainty. Three methods, multi-gene genetic programming (MGGP), Kriging (KRG) and support vector regression (SVR), were used to construct surrogate models for a time-consuming multi-phase flow model. To improve the performance of the surrogate model, ensemble surrogates were constructed based on combinations of different stand-alone surrogate models. The results show that: (1) the surrogate-modeling uncertainty was successfully addressed by the conservative strategy, which means that this method is promising for addressing surrogate-modeling uncertainty. (2) The ensemble surrogate model that combines MGGP with KRG showed the most favorable performance, which indicates that this ensemble surrogate can utilize both stand-alone surrogate models to improve the performance of the surrogate model.

  20. Benefit-feature segmentation: A tool for the design of a supply-chain strategy

    NARCIS (Netherlands)

    Canever, M.D.; Trijp, van J.C.M.; Lans, van der I.A.

    2007-01-01

    Abstract: Purpose ¿ This paper aims to assess the effectiveness of different segmentation schemes as the basis of marketing strategy, with particular respect to supply-chain decisions, and to propose a new procedure capable of combining benefits sought and features available.

  1. Designing and Developing a Programme-Focused Assessment Strategy: A Case Study

    Science.gov (United States)

    Brunton, James; Brown, Mark; Costello, Eamon; Walsh, Elaine

    2016-01-01

    This case study describes the process that the Humanities Programme Team, in Dublin City University's Open Education Unit, has undertaken with regard to developing a systematic, programme-focused assessment strategy. It charts the development of an Assessment Matrix that facilitated the enhancement of programme coherence in the context of a…

  2. Design of Energy Storage Control Strategy to Improve the PV System Power Quality

    DEFF Research Database (Denmark)

    Lei, Mingyu; Yang, Zilong; Wang, Yibo

    2016-01-01

    Random fluctuation of PV power is becoming a more and more serious problem affecting the power quality and stability of grid as the PV penetration keeps increasing recent years. Aiming at this problem, this paper proposed a control strategy of energy storage system based on Model Predictive Contr...

  3. Patent circumvention strategy using TRIZ-based design-around approaches

    NARCIS (Netherlands)

    Veldhuijzen van Zanten, J.F.J.; Wits, Wessel Willems; Aoussat, Améziane; Cavallucci, Denis; Trella, Marc

    2013-01-01

    This paper proposes guidelines for a systematic patent circumvention strategy utilizing innovation and TRIZ tools. It focuses on starting from a landscape of patents and claims of an existing patent to create solutions that circumvent this existing patent. Information gathered from various sources

  4. Patent circumvention strategy using TRIZ-based design-around approaches

    NARCIS (Netherlands)

    Veldhuijzen van Zanten, J.F.J.; Wits, Wessel Willems

    2015-01-01

    This paper proposes guidelines for a systematic patent circumvention strategy utilizing innovation and TRIZ tools. It focuses on starting from a landscape of patents and claims of an existing patent to create solutions that circumvent this existing patent. Information gathered from various sources

  5. Designing a Successful KM Strategy: What You Really Need to Know

    International Nuclear Information System (INIS)

    Barnes, S.

    2016-01-01

    Full text: This technical brief outlines the steps to follow to create a knowledge management strategy that will facilitate the utilization of knowledge management (KM) techniques and activities within the organization. Ultimately aiding the organization to meet its goals and objectives. (author

  6. Utility of Army Design Methodology in U.S. Coast Guard Counter Narcotic Interdiction Strategy

    Science.gov (United States)

    2017-06-09

    including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations...or functionality of the strategy itself. It is important to note, the interrogative process of FAS generally takes place after risk has been evaluated...confiscated 52 these fully submersible vessels in mid construction, however credible data suggests fully submersible vessels are in operation and

  7. Utilizing the Brand Ecosystem Framework in Designing Branding Strategies for Higher Education

    Science.gov (United States)

    Pinar, Musa; Trapp, Paul; Girard, Tulay; Boyt, Thomas E.

    2011-01-01

    Purpose: In today's complex and highly competitive marketplace, universities and colleges, realizing a need to develop sustainable strategies, have turned to branding as a solution. However, because of their unique service characteristics, universities' branding attempts may not always result in success. The aim of this paper is to present a brand…

  8. Knowledge management and Competitive Intelligenge: designing competitiveness and innovation strategies to small business

    Directory of Open Access Journals (Sweden)

    Cassia Aparecida Corsatto

    2013-11-01

    Full Text Available The present paper´s intention was make a presentation about the concepts and definitions of knowledge management and competitive intelligence search in the current bibliography and draw a parallel about their real possibility of application in the small business context. By the way, the main intention was bring the discussion to the relevance of the knowledge management to make and applied competitiveness strategies in this enterprise, another intention was show others elements and tools to support the application of this strategies inside the organization. This elements are: person and process. This elements are: person and process and they have a essential importance to create an internal enterprise knowledge, to create and maintain the information organized to keep the organizations with more appropriate information witch will support the way to formulated strategies and make decisions. It also intend to show tolls and methodologies to help organizations improved the competitive intelligence`s strategies as a way to increase competitiveness and value creation for customers and market.

  9. Designing Growth Strategies for Romanian Offshore Outsourcing Vendors: Deploying Competitive Intelligence from Indian Software Industry

    Directory of Open Access Journals (Sweden)

    Mukta SAMTANI

    2012-11-01

    Full Text Available The paper aims to derive growth strategies for three Romanian software developers involved in offshore outsourcing, by deploying competitive intelligence on the top offshore players from India. The paper revolves around two key assumptions. One is that Romanian companies are growing the way Indian companies did few years ago and so it would be important to analyse the strategies that they had adopted to reach their present potential. Second, there is a set of factors common to all industry players whether in India or Romania as the industry is global in nature, so it would really be important to collect information about how are these global competitors planning to mitigate the environmental threats and to take advantage of the opportunities being presented by the changes in the external environment. For the three Romanian companies whose managers accepted to be included in our study, the main strategic option they want to pursue is market penetration. Taking cue from the strategies adopted by their Indian counterparts, the study recommends growth strategies for these Romanian players.

  10. Visualisation and research strategy for computational spatial and structural design interaction

    NARCIS (Netherlands)

    Peeten, D.; Hofmeyer, H.; Thabet, W

    2010-01-01

    A research engine is under development for studying the interaction of spatial and structural design processes. The design processes are being implemented as two separate configurable transformation steps; a conversion step and an optimisation step. A significant part of the spatial-to-structural

  11. How Interface Design and Search Strategy Influence Children’s Search Performance and Evaluation

    NARCIS (Netherlands)

    Jochmann-Mannak, Hanna; Lentz, Leo; Huibers, Theo W.C.; Sanders, Ted

    This chapter presents an experiment with 158 children, aged 10 to 12, in which search performance and attitudes towards an informational Website are investigated. The same Website was designed in 3 different types of interface design varying in playfulness of navigation structure and in playfulness

  12. Teacher Design Teams as a Strategy for Professional Development: The Role of the Facilitator

    Science.gov (United States)

    Becuwe, Heleen; Tondeur, Jo; Pareja Roblin, Natalie; Thys, Jeroen; Castelein, Els

    2016-01-01

    The goal of the current study was to explore the role and importance of the facilitator in teacher design teams. The study took place in the context of a pre-service teacher education institution in Belgium, where teacher design teams were set up to facilitate the professional development of teacher educators. The findings from focus-group…

  13. An Efficient Experimental Design Strategy for Modelling and Characterization of Processes

    DEFF Research Database (Denmark)

    Tajsoleiman, Tannaz; Semenova, Daria; Oliveira Fernandes, Ana Carolina

    2017-01-01

    Designing robust, efficient and economic processes is a main challenge for the biotech industries. To achieve a well-designed bioprocess, understanding the ongoing phenomena and the involved reaction kinetics is crucial. By development of advanced miniaturized reactors, a promising opportunity ar...

  14. A methodological approach to the design of optimising control strategies for sewer systems

    DEFF Research Database (Denmark)

    Mollerup, Ane Loft; Mikkelsen, Peter Steen; Sin, Gürkan

    2016-01-01

    This study focuses on designing an optimisation based control for sewer system in a methodological way and linking itto a regulatory control. Optimisation based design is found to depend on proper choice of a model, formulation of objective function and tuning of optimisation parameters. Accordin......This study focuses on designing an optimisation based control for sewer system in a methodological way and linking itto a regulatory control. Optimisation based design is found to depend on proper choice of a model, formulation of objective function and tuning of optimisation parameters....... Accordingly, two novel optimisation configurations are developed, where the optimisation either acts on the actuators or acts on the regulatory control layer. These two optimisation designs are evaluated on a sub-catchment of the sewer system in Copenhagen, and found to perform better than the existing...

  15. Exploration of alternate catalytic mechanisms and optimization strategies for retroaldolase design.

    Science.gov (United States)

    Bjelic, Sinisa; Kipnis, Yakov; Wang, Ling; Pianowski, Zbigniew; Vorobiev, Sergey; Su, Min; Seetharaman, Jayaraman; Xiao, Rong; Kornhaber, Gregory; Hunt, John F; Tong, Liang; Hilvert, Donald; Baker, David

    2014-01-09

    Designed retroaldolases have utilized a nucleophilic lysine to promote carbon-carbon bond cleavage of β-hydroxy-ketones via a covalent Schiff base intermediate. Previous computational designs have incorporated a water molecule to facilitate formation and breakdown of the carbinolamine intermediate to give the Schiff base and to function as a general acid/base. Here we investigate an alternative active-site design in which the catalytic water molecule was replaced by the side chain of a glutamic acid. Five out of seven designs expressed solubly and exhibited catalytic efficiencies similar to previously designed retroaldolases for the conversion of 4-hydroxy-4-(6-methoxy-2-naphthyl)-2-butanone to 6-methoxy-2-naphthaldehyde and acetone. After one round of site-directed saturation mutagenesis, improved variants of the two best designs, RA114 and RA117, exhibited among the highest kcat (>10(-3)s(-1)) and kcat/KM (11-25M(-1)s(-1)) values observed for retroaldolase designs prior to comprehensive directed evolution. In both cases, the >10(5)-fold rate accelerations that were achieved are within 1-3 orders of magnitude of the rate enhancements reported for the best catalysts for related reactions, including catalytic antibodies (kcat/kuncat=10(6) to 10(8)) and an extensively evolved computational design (kcat/kuncat>10(7)). The catalytic sites, revealed by X-ray structures of optimized versions of the two active designs, are in close agreement with the design models except for the catalytic lysine in RA114. We further improved the variants by computational remodeling of the loops and yeast display selection for reactivity of the catalytic lysine with a diketone probe, obtaining an additional order of magnitude enhancement in activity with both approaches. © 2013.

  16. A study on HCI design strategy using emergent features and response time

    International Nuclear Information System (INIS)

    Lee, Sung Jin; Chang, Soon Heung; Park, Jin Gyun

    2001-01-01

    Existing design process of user interface has some weak point that there is no feedback information and no quantitative information between each sub process. If they're such information in design process, the design time cycle will be decreased and the contentment of HCI in the aspect of user will be more easily archived. In this study, new design process with feedback information and quantitative information was proposed using emergent features and user response time. The proposed methodology was put together with three main parts. First part is to calculate distinctiveness of a user interface or expanded user interface with consideration of emergent features. Second part is to expand a prototype user interface with design option for purpose of design requirement using directed structure graph (or nodal graph) theory. Last part is to convert non-realized value, distinctiveness, into realized value, response time, by response time database or response time correlation in the form of Hick-Hyman law equation. From the present validations, the usefulness of the proposed methodology was obtained by simple validation testing. It was found that emergent features should be improved for high reflection of real user interface. For the reliability of response time database, lots of end-user experiment is necessary. Expansion algorithm and representation technique of qualitative information should be somewhat improved for more efficient design process

  17. Analysis of design strategies for mitigating the consequences of lithium fire within containment of controlled thermonuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dube, D A; Kazimi, M S

    1978-07-01

    A lithium combustion model (LITFIRE) was developed to describe the physical and chemical processes which occur during a hypothetical lithium spill and fire. The model was used to study the effectiveness of various design strategies for mitigating the consequences of lithium fire, using the UWMAK-III features as a reference design. Calculations show that without any special fire protection measures, the containment may reach pressures of up to 32 psig when one coolant loop is spilled inside the reactor building. Temperatures as high as 2000/sup 0/F would also be experienced by some of the containment structures. These consequences were found to diminish greatly by the incorporation of a number of design strategies including initially subatmospheric containment pressures, enhanced structural surface heat removal capability, initially low oxygen concentrations, and active post-accident cooling of the containment gas. The EBTR modular design was found to limit the consequences of a lithium spill, and hence offers a potential safety advantage. Calculations of the maximum flame temperature resulting from lithium fire indicate that none of the radioactive first wall materials under consideration would vaporize, and only a few could possibly melt.

  18. Analysis of design strategies for mitigating the consequences of lithium fire within containment of controlled thermonuclear reactors

    International Nuclear Information System (INIS)

    Dube, D.A.; Kazimi, M.S.

    1978-07-01

    A lithium combustion model (LITFIRE) was developed to describe the physical and chemical processes which occur during a hypothetical lithium spill and fire. The model was used to study the effectiveness of various design strategies for mitigating the consequences of lithium fire, using the UWMAK-III features as a reference design. Calculations show that without any special fire protection measures, the containment may reach pressures of up to 32 psig when one coolant loop is spilled inside the reactor building. Temperatures as high as 2000 0 F would also be experienced by some of the containment structures. These consequences were found to diminish greatly by the incorporation of a number of design strategies including initially subatmospheric containment pressures, enhanced structural surface heat removal capability, initially low oxygen concentrations, and active post-accident cooling of the containment gas. The EBTR modular design was found to limit the consequences of a lithium spill, and hence offers a potential safety advantage. Calculations of the maximum flame temperature resulting from lithium fire indicate that none of the radioactive first wall materials under consideration would vaporize, and only a few could possibly melt

  19. MHC class I status of tumours and design of immunotherapeutic strategies

    Czech Academy of Sciences Publication Activity Database

    Bubeník, Jan; Vonka, V.

    2003-01-01

    Roč. 90, 2-3 (2003), s. 177-178 ISSN 0165-2478 R&D Projects: GA MZd NC7148; GA MZd NC3707; GA MZd NC6957; GA MZd NC7552; GA ČR GA301/01/0985; GA AV ČR IAA5052203 Institutional research plan: CEZ:AV0Z5052915 Keywords : MHC * beta2-mikroglobulin * immunotherapeutic strategies Subject RIV: FB - Endocrinology, Diabetology, Metabolism, Nutrition Impact factor: 1.710, year: 2003

  20. Sensitivity of the dispatch strategy in designing grid integrated hybrid energy systems

    OpenAIRE

    Perera, Amarasinghage Tharindu Dasun; Mauree, Dasaraden; Scartezzini, Jean-Louis; Nik, Vahid M.

    2016-01-01

    Integrating renewable energy technologies based on solar PV (SPV) and wind energy in the energy system is challenging due to time dependence of the energy potential for these energy sources. Grid integrated hybrid energy systems combining SPV panels, wind turbines, battery bank and internal combustion generators (ICG) can be used in this regard specially for distributed generation. Energy-economic dispatch strategy plays a vital role in managing the energy flow of the system. However, it is d...