WorldWideScience

Sample records for eliminating thermal violin

  1. Eliminating thermal violin spikes from LIGO noise

    Energy Technology Data Exchange (ETDEWEB)

    Santamore, D. H.; Levin, Yuri

    2001-08-15

    We have developed a scheme for reducing LIGO suspension thermal noise close to violin-mode resonances. The idea is to monitor directly the thermally induced motion of a small portion of (a 'point' on) each suspension fiber, thereby recording the random forces driving the test-mass motion close to each violin-mode frequency. One can then suppress the thermal noise by optimally subtracting the recorded fiber motions from the measured motion of the test mass, i.e., from the LIGO output. The proposed method is a modification of an analogous but more technically difficult scheme by Braginsky, Levin and Vyatchanin for reducing broad-band suspension thermal noise. The efficiency of our method is limited by the sensitivity of the sensor used to monitor the fiber motion. If the sensor has no intrinsic noise (i.e. has unlimited sensitivity), then our method allows, in principle, a complete removal of violin spikes from the thermal-noise spectrum. We find that in LIGO-II interferometers, in order to suppress violin spikes below the shot-noise level, the intrinsic noise of the sensor must be less than {approx}2 x 10{sup -13} cm/Hz. This sensitivity is two orders of magnitude greater than that of currently available sensors.

  2. Eliminating thermal violin spikes from LIGO noise

    International Nuclear Information System (INIS)

    Santamore, D. H.; Levin, Yuri

    2001-01-01

    We have developed a scheme for reducing LIGO suspension thermal noise close to violin-mode resonances. The idea is to monitor directly the thermally induced motion of a small portion of (a 'point' on) each suspension fiber, thereby recording the random forces driving the test-mass motion close to each violin-mode frequency. One can then suppress the thermal noise by optimally subtracting the recorded fiber motions from the measured motion of the test mass, i.e., from the LIGO output. The proposed method is a modification of an analogous but more technically difficult scheme by Braginsky, Levin and Vyatchanin for reducing broad-band suspension thermal noise. The efficiency of our method is limited by the sensitivity of the sensor used to monitor the fiber motion. If the sensor has no intrinsic noise (i.e. has unlimited sensitivity), then our method allows, in principle, a complete removal of violin spikes from the thermal-noise spectrum. We find that in LIGO-II interferometers, in order to suppress violin spikes below the shot-noise level, the intrinsic noise of the sensor must be less than ∼2 x 10 -13 cm/Hz. This sensitivity is two orders of magnitude greater than that of currently available sensors

  3. Violin

    Science.gov (United States)

    Curtin, Joseph; Rossing, Thomas D.

    The first known violins were built in Italy in the early 1500s. While not much is yet known about the instrument's prior development, European forebears include the rebec and the Renaissance fiddle, which themselves evolved from instruments found in the ancient Eastern world. The violin brought together in a particularly happy way features seen in a variety of earlier stringed instruments. Arched plates increased the stiffness-to-mass ratio of the body, creating a more brilliant sound and helping resist long-term deformation. A pronounced waist gave the bow access to the outermost strings, while the precisely calibrated curves of fingerboard and bridge enabled the strings to be played individually as well as in two-, three-, and even four-part chords. In contrast to the viola da gamba and guitar, the violin's top and back plates overhung the ribs, allowing easy removal for repairs, thus contributing to the instrument's fabled longevity. A graceful outline, harmonious proportions, and the minimal use of ornamentation together lent the violin a timeless beauty - explaining in part why it has resisted significant stylistic modification to this day. For a discussion of historical string instruments, see Chap. 17.

  4. Suspensions with reduced violin string modes

    International Nuclear Information System (INIS)

    Lee, B H; Ju, L; Blair, D G

    2006-01-01

    We discuss the possibility of significantly reducing the number and Q-factor of violin string modes in the mirror suspension. Simulations of a bar-flexure suspension and an orthogonal ribbon have shown a reduction in the number of violin string modes when compared to a normal ribbon suspension. By calculating the expected suspension thermal noise, we find that the orthogonal ribbon provides a promising suspension alternative. A lower number of violin modes oscillating in the direction of the laser and a reduction in violin mode peak values of at least 23dB can be achieved with a slight increase in thermal noise above 40Hz

  5. Suspensions with reduced violin string modes

    Energy Technology Data Exchange (ETDEWEB)

    Lee, B H; Ju, L; Blair, D G [School of Physics, University of Western Australia, Crawley 6009, WA (Australia)

    2006-03-02

    We discuss the possibility of significantly reducing the number and Q-factor of violin string modes in the mirror suspension. Simulations of a bar-flexure suspension and an orthogonal ribbon have shown a reduction in the number of violin string modes when compared to a normal ribbon suspension. By calculating the expected suspension thermal noise, we find that the orthogonal ribbon provides a promising suspension alternative. A lower number of violin modes oscillating in the direction of the laser and a reduction in violin mode peak values of at least 23dB can be achieved with a slight increase in thermal noise above 40Hz.

  6. Physics and the Violin

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, Bill (SCIPP, UCSC)

    2007-05-23

    While the violin has been around for several hundreds of years, our understanding of how it works is still evolving. The character of violin sound is controlled by its frequency content, i.e., the harmonic content (or in musical terminology - the overtones). Both the player and the way in which the violin was made affect this frequency content. Both of these aspects will be examined. Research into how whole body vibrational modes can be manipulated by the violin maker during fabrication will be discussed. Examples of resulting violin sound will be demonstrated.

  7. A simple violin oscillator

    Science.gov (United States)

    Jones, R. T.

    1976-01-01

    For acoustic tests the violin is driven laterally at the bridge by a small speaker of the type commonly found in pocket transistor radios. An audio oscillator excites the tone which is picked up by a sound level meter. Gross patterns of vibration modes are obtained by the Chladni method.

  8. Electric Guitar and Violin

    Science.gov (United States)

    Gough, Colin

    Almost all the instruments described in this book have their origins in historical cultures dating back over many centuries. In contrast, the electric guitar and violin are clearly twentieth-century innovations. They are products of the electronics age following invention of the rectifying thermionic valve (tube) by John Ambrose Fleming in 1904, the amplifying triode valve (tube) by Lee de Forest in 1907, and the vacuum-filled amplifying valve (tube) by Irving Langmuir in 1915. By 1916, such valves were already being used in radio receivers, and important advances were being made in microphone, amplifier, and loudspeaker design. This, and the increasingly wide distribution of mains electricity in the 1920s, provided the technology and infrastructure for the development of the electric guitar and violin and their lower-pitched relations - the bass guitar, viola, cello, and string-bass. Although we focus here on the electric guitar and violin, almost everything discussed in this chapter is also relevant to their lower-pitched relations.

  9. The violin bridge as filter.

    Science.gov (United States)

    Bissinger, George

    2006-07-01

    The violin bridge filter role was investigated using modal and acoustic measurements on 12 quality-rated violins combined with systematic bridge rocking frequency f(rock) and wing mass decrements deltam on four bridges for two other violins. No isolated bridge resonances were observed; bridge motions were complex (including a "squat" mode near 0.8 kHz) except for low frequency rigid body pivot motions, all more or less resembling rocking motion at higher frequencies. A conspicuous broad peak near 2.3 kHz in bridge driving point mobility (labeled BH) was seen for good and bad violins. Similar structure was seen in averaged bridge, bridge feet, corpus mobilities and averaged radiativity. No correlation between violin quality and BH driving point, averaged corpus mobility magnitude, or radiativity was found. Increasing averaged-over-f(rock) deltam(g) from 0 to 0.12 generally increased radiativity across the spectrum. Decreasing averaged-over-deltam f(rock) from 3.6 to 2.6 kHz produced consistent decreases in radiativity between 3 and 4.2 kHz, but only few-percent decreases in BH frequency. The lowest f(rock) values were accompanied by significantly reduced radiation from the Helmholtz A0 mode near 280 Hz; this, combined with reduced high frequency output, created overall radiativity profiles quite similar to "bad" violins among the quality-rated violins.

  10. Kabalevsky, Violin Concerto in C major, Op. 48 / Robert Layton

    Index Scriptorium Estoniae

    Layton, Robert

    1991-01-01

    Uuest heliplaadist "Kabalevsky, Violin Concerto in C major, Op. 48. Khachaturian, Violin Concerto in D minor, Lydia Mordkovitch (violin). Royal Scottish National Orchestra /Neeme Järvi". Chandos MC ABTD 1519; CD CHAN 8918 (53 minutes)

  11. Controllable damping of high-Q violin modes in fused silica suspension fibers

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriev, A V; Mescheriakov, S D; Mitrofanov, V P [Faculty of Physics, Moscow State University, Moscow 119991 (Russian Federation); Tokmakov, K V, E-mail: dmitriev@hbar.phys.msu.r, E-mail: mitr@hbar.phys.msu.r [Present address: Department of Physics, SUPA, University of Strathclyde, Glasgow G4 0NG (United Kingdom)

    2010-01-21

    Fused silica fiber suspension of the test masses will be used in the interferometric gravitational wave detectors of the next generation. This allows a significant reduction of losses in the suspension and thermal noise associated with the suspension. Unfortunately, unwanted violin modes may be accidentally excited in the suspension fibers. The Q-factor of the violin modes also exceeds 10{sup 8}. They have a ring-down time that is too long and may complicate the stable control of the interferometer. Results of the investigation of a violin mode active damping system are described. An original sensor and actuator were especially developed to realize the effective coupling of a thin, optically transparent, non-conducting fused silica fiber with an electric circuit. The damping system allowed the changing of the violin mode's damping rate over a wide range.

  12. Controllable damping of high-Q violin modes in fused silica suspension fibers

    Science.gov (United States)

    Dmitriev, A. V.; Mescheriakov, S. D.; Tokmakov, K. V.; Mitrofanov, V. P.

    2010-01-01

    Fused silica fiber suspension of the test masses will be used in the interferometric gravitational wave detectors of the next generation. This allows a significant reduction of losses in the suspension and thermal noise associated with the suspension. Unfortunately, unwanted violin modes may be accidentally excited in the suspension fibers. The Q-factor of the violin modes also exceeds 108. They have a ring-down time that is too long and may complicate the stable control of the interferometer. Results of the investigation of a violin mode active damping system are described. An original sensor and actuator were especially developed to realize the effective coupling of a thin, optically transparent, non-conducting fused silica fiber with an electric circuit. The damping system allowed the changing of the violin mode's damping rate over a wide range.

  13. Controllable damping of high-Q violin modes in fused silica suspension fibers

    International Nuclear Information System (INIS)

    Dmitriev, A V; Mescheriakov, S D; Mitrofanov, V P; Tokmakov, K V

    2010-01-01

    Fused silica fiber suspension of the test masses will be used in the interferometric gravitational wave detectors of the next generation. This allows a significant reduction of losses in the suspension and thermal noise associated with the suspension. Unfortunately, unwanted violin modes may be accidentally excited in the suspension fibers. The Q-factor of the violin modes also exceeds 10 8 . They have a ring-down time that is too long and may complicate the stable control of the interferometer. Results of the investigation of a violin mode active damping system are described. An original sensor and actuator were especially developed to realize the effective coupling of a thin, optically transparent, non-conducting fused silica fiber with an electric circuit. The damping system allowed the changing of the violin mode's damping rate over a wide range.

  14. The Bowed Tube : a Virtual Violin

    OpenAIRE

    Carrillo, Alfonso P.; Bonada, Jordi

    2010-01-01

    This paper presents a virtual violin for real-time performances consisting of two modules: a violin spectral modeland a control interface. The interface is composed by asensing bow and a tube with drawn strings in substitutionof a real violin. The spectral model is driven by the bowingcontrols captured with the control interface and it is ableto predict spectral envelopes of the sound corresponding tothose controls. The envelopes are filled with harmonic andnoisy content and given to an addit...

  15. A real-time acoustic violin emulator for electric violins

    OpenAIRE

    GAYDECKI , Patrick

    2012-01-01

    International audience; A stand-alone electronic device has been developed that processes the raw electrical output produced by an electric violin, generating an output signal which, when fed to an amplifier, produces a sound that approximates closely the timbre of an acoustic or wooden instrument. The system comprises a high-impedance preamplifier, a 24-bit sigma delta codec and a digital signal processor (DSP) operating at 600 million multiplications-accumulations per second (MMACs). The de...

  16. Chin force in violin playing.

    Science.gov (United States)

    Obata, Satoshi; Kinoshita, Hiroshi

    2012-06-01

    Force generated between the left mandible of violinists and the chinrest of the violin was examined using a force-sensing chinrest developed in this study. A strain-gauge force sensor was built, and it was fixed between the violin's top plate and a chin cup. Fifteen professional/amateur violinists held the violin statically, played musical scales with different sound properties and sounding techniques, as well as an excerpt from a Max Bruch concerto. Peak and mean forces were evaluated for each task. In a separate experiment, lateral movement of the lower teeth due to different levels of voluntary chin force exertion was measured. Static holding forces observed were 15 and 22 N with and without the help of the left hand, respectively. Peak force increased from 16 N at soft dynamics to 20 N at strong dynamics during scales. The force further increased to 29 N with the use of vibrato technique and 35 N during shifts. Tempo and hand position did not affect the force. Playing a Bruch concerto induced a mean peak force of 52 N, ranging from 31 to 82 N among the violinists. The developed force-sensing chinrest could accurately record the generated chin force. Typical chin force to stabilize the violin during ordinary musical performance was less than 30 N, but it could momentarily exceed 50 N when technically demanding musical pieces were performed. The lateral shift of the mandible was fairly small (<0.4 mm) even with high chin-force exertion, possibly due to clenching of the molars.

  17. Towards a Computer Assisted Violin Teaching Aid

    OpenAIRE

    Fitzgerald, Derry; Charles, Jane; Coyle, Eugene

    2004-01-01

    This paper presents a possible approach for developing a violin teaching aid based on violin pedagogy, sound analysis and comparison of beginner and good player recordings. This teaching aid is targeted at students who have difficulty listening attentively to the sounds they produce. It aims to draw their attention to the sound of a fault, offer correction and to train the user's ear to actively listen.

  18. A Research Focused on Improving Vocalisation Level on Violin Education

    Science.gov (United States)

    Parasiz, Gökalp

    2018-01-01

    The research aimed to improve vocalisation levels of music teacher's candidates on performance works for violin education moving from difficulties faced by prospective teachers. At the same time, it was aimed to provide new perspectives to violin educators. Study group was composed of six 3rd grade students studying violin education in a State…

  19. Wall compliance and violin cavity modes.

    Science.gov (United States)

    Bissinger, George

    2003-03-01

    Violin corpus wall compliance, which has a substantial effect on cavity mode frequencies, was added to Shaw's two-degree-of-freedom (2DOF) network model for A0 ("main air") and A1 (lowest length mode included in "main wood") cavity modes. The 2DOF model predicts a V(-0.25) volume dependence for A0 for rigid violin-shaped cavities, to which a semiempirical compliance correction term, V(-x(c)) (optimization parameter x(c)) consistent with cavity acoustical compliance and violin-based scaling was added. Optimizing x(c) over A0 and A1 frequencies measured for a Hutchins-Schelleng violin octet yielded x(c) approximately 0.08. This markedly improved A0 and A1 frequency predictions to within approximately +/- 10% of experiment over a range of about 4.5:1 in length, 10:1 in f-hole area, 3:1 in top plate thickness, and 128:1 in volume. Compliance is a plausible explanation for A1 falling close to the "main wood" resonance, not increasingly higher for the larger instruments, which were scaled successively shorter compared to the violin for ergonomic and practical reasons. Similarly incorporating compliance for A2 and A4 (lowest lower-/upper-bout modes, respectively) improves frequency predictions within +/-20% over the octet.

  20. Listener evaluations of new and Old Italian violins

    Science.gov (United States)

    Fritz, Claudia; Curtin, Joseph; Poitevineau, Jacques; Tao, Fan-Chia

    2017-05-01

    Old Italian violins are routinely credited with playing qualities supposedly unobtainable in new instruments. These qualities include the ability to project their sound more effectively in a concert hall—despite seeming relatively quiet under the ear of the player—compared with new violins. Although researchers have long tried to explain the “mystery” of Stradivari’s sound, it is only recently that studies have addressed the fundamental assumption of tonal superiority. Results from two studies show that, under blind conditions, experienced violinists tend to prefer playing new violins over Old Italians. Moreover, they are unable to tell new from old at better than chance levels. This study explores the relative merits of Stradivari and new violins from the perspective of listeners in a hall. Projection and preference are taken as the two broadest criteria by which listeners might meaningfully compare violins. Which violins are heard better, and which are preferred? In two separate experiments, three new violins were compared with three by Stradivari. Projection was tested both with and without orchestral accompaniment. Projection and preference were judged simultaneously by dividing listeners into two groups. Results are unambiguous. The new violins projected better than the Stradivaris whether tested with orchestra or without, the new violins were generally preferred by the listeners, and the listeners could not reliably distinguish new from old. The single best-projecting violin was considered the loudest under the ear by players, and on average, violins that were quieter under the ear were found to project less well.

  1. Listener evaluations of new and Old Italian violins.

    Science.gov (United States)

    Fritz, Claudia; Curtin, Joseph; Poitevineau, Jacques; Tao, Fan-Chia

    2017-05-23

    Old Italian violins are routinely credited with playing qualities supposedly unobtainable in new instruments. These qualities include the ability to project their sound more effectively in a concert hall-despite seeming relatively quiet under the ear of the player-compared with new violins. Although researchers have long tried to explain the "mystery" of Stradivari's sound, it is only recently that studies have addressed the fundamental assumption of tonal superiority. Results from two studies show that, under blind conditions, experienced violinists tend to prefer playing new violins over Old Italians. Moreover, they are unable to tell new from old at better than chance levels. This study explores the relative merits of Stradivari and new violins from the perspective of listeners in a hall. Projection and preference are taken as the two broadest criteria by which listeners might meaningfully compare violins. Which violins are heard better, and which are preferred? In two separate experiments, three new violins were compared with three by Stradivari. Projection was tested both with and without orchestral accompaniment. Projection and preference were judged simultaneously by dividing listeners into two groups. Results are unambiguous. The new violins projected better than the Stradivaris whether tested with orchestra or without, the new violins were generally preferred by the listeners, and the listeners could not reliably distinguish new from old. The single best-projecting violin was considered the loudest under the ear by players, and on average, violins that were quieter under the ear were found to project less well.

  2. Experimental study on the thermal performance of a mechanical cooling tower with different drift eliminators

    International Nuclear Information System (INIS)

    Lucas, M.; Martinez, P.J.; Viedma, A.

    2009-01-01

    Cooling towers are equipment devices commonly used to dissipate heat from power generation units, water-cooled refrigeration, air conditioning and industrial processes. Water drift emitted from cooling towers is objectionable for several reasons, mainly due to human health hazards. It is common practice to fit drift eliminators to cooling towers in order to minimize water loss from the system. It is foreseeable that the characteristics of the installed drift eliminators, like their pressure drop, affect the thermal performance of the cooling tower. However, no references regarding this fact have been found in the reviewed bibliography. This paper studies the thermal performance of a forced draft counter-flow wet cooling tower fitted with different drift eliminators for a wide range of air and water mass flow rates. The data registered in the experimental set-up were employed to obtain correlations of the tower characteristic, which defines the cooling tower's thermal performance. The outlet water temperature predicted by these correlations was compared with the experimentally registered values obtaining a maximum difference of ±3%

  3. VIOLIN: vaccine investigation and online information network.

    Science.gov (United States)

    Xiang, Zuoshuang; Todd, Thomas; Ku, Kim P; Kovacic, Bethany L; Larson, Charles B; Chen, Fang; Hodges, Andrew P; Tian, Yuying; Olenzek, Elizabeth A; Zhao, Boyang; Colby, Lesley A; Rush, Howard G; Gilsdorf, Janet R; Jourdian, George W; He, Yongqun

    2008-01-01

    Vaccines are among the most efficacious and cost-effective tools for reducing morbidity and mortality caused by infectious diseases. The vaccine investigation and online information network (VIOLIN) is a web-based central resource, allowing easy curation, comparison and analysis of vaccine-related research data across various human pathogens (e.g. Haemophilus influenzae, human immunodeficiency virus (HIV) and Plasmodium falciparum) of medical importance and across humans, other natural hosts and laboratory animals. Vaccine-related peer-reviewed literature data have been downloaded into the database from PubMed and are searchable through various literature search programs. Vaccine data are also annotated, edited and submitted to the database through a web-based interactive system that integrates efficient computational literature mining and accurate manual curation. Curated information includes general microbial pathogenesis and host protective immunity, vaccine preparation and characteristics, stimulated host responses after vaccination and protection efficacy after challenge. Vaccine-related pathogen and host genes are also annotated and available for searching through customized BLAST programs. All VIOLIN data are available for download in an eXtensible Markup Language (XML)-based data exchange format. VIOLIN is expected to become a centralized source of vaccine information and to provide investigators in basic and clinical sciences with curated data and bioinformatics tools for vaccine research and development. VIOLIN is publicly available at http://www.violinet.org.

  4. Some Intermediate-Level Violin Concertos.

    Science.gov (United States)

    Abramson, Michael

    1997-01-01

    Contends that many violin students attempt difficult concertos before they are technically or musically prepared. Identifies a variety of concertos at the intermediate and advanced intermediate-level for students to study and master before attempting the advanced works by Bach and Mozart. Includes concertos by Vivaldi, Leclair, Viotti, Haydn,…

  5. Soloist evaluations of six Old Italian and six new violins

    Science.gov (United States)

    Fritz, Claudia; Curtin, Joseph; Poitevineau, Jacques; Borsarello, Hugues; Wollman, Indiana; Tao, Fan-Chia; Ghasarossian, Thierry

    2014-01-01

    Many researchers have sought explanations for the purported tonal superiority of Old Italian violins by investigating varnish and wood properties, plate tuning systems, and the spectral balance of the radiated sound. Nevertheless, the fundamental premise of tonal superiority has been investigated scientifically only once very recently, and results showed a general preference for new violins and that players were unable to reliably distinguish new violins from old. The study was, however, relatively small in terms of the number of violins tested (six), the time allotted to each player (an hour), and the size of the test space (a hotel room). In this study, 10 renowned soloists each blind-tested six Old Italian violins (including five by Stradivari) and six new during two 75-min sessions—the first in a rehearsal room, the second in a 300-seat concert hall. When asked to choose a violin to replace their own for a hypothetical concert tour, 6 of the 10 soloists chose a new instrument. A single new violin was easily the most-preferred of the 12. On average, soloists rated their favorite new violins more highly than their favorite old for playability, articulation, and projection, and at least equal to old in terms of timbre. Soloists failed to distinguish new from old at better than chance levels. These results confirm and extend those of the earlier study and present a striking challenge to near-canonical beliefs about Old Italian violins. PMID:24711376

  6. Soloist evaluations of six Old Italian and six new violins.

    Science.gov (United States)

    Fritz, Claudia; Curtin, Joseph; Poitevineau, Jacques; Borsarello, Hugues; Wollman, Indiana; Tao, Fan-Chia; Ghasarossian, Thierry

    2014-05-20

    Many researchers have sought explanations for the purported tonal superiority of Old Italian violins by investigating varnish and wood properties, plate tuning systems, and the spectral balance of the radiated sound. Nevertheless, the fundamental premise of tonal superiority has been investigated scientifically only once very recently, and results showed a general preference for new violins and that players were unable to reliably distinguish new violins from old. The study was, however, relatively small in terms of the number of violins tested (six), the time allotted to each player (an hour), and the size of the test space (a hotel room). In this study, 10 renowned soloists each blind-tested six Old Italian violins (including five by Stradivari) and six new during two 75-min sessions--the first in a rehearsal room, the second in a 300-seat concert hall. When asked to choose a violin to replace their own for a hypothetical concert tour, 6 of the 10 soloists chose a new instrument. A single new violin was easily the most-preferred of the 12. On average, soloists rated their favorite new violins more highly than their favorite old for playability, articulation, and projection, and at least equal to old in terms of timbre. Soloists failed to distinguish new from old at better than chance levels. These results confirm and extend those of the earlier study and present a striking challenge to near-canonical beliefs about Old Italian violins.

  7. Elimination of estrogenic activity of thermal paper using laccase from Trichoderma sp NFCCI-2745.

    Science.gov (United States)

    Divya, L M; Prasanth, G K; Sadasivan, C

    2013-02-01

    In thermal printing, bisphenol A (BPA) functions chemically as a developer and reacts with white or colorless dyes in the presence of heat, converting them to a dark color. BPA can transfer readily to skin in small amounts from these papers. Its damage to environment and organisms has caused an extensive concern. In the present study, thermal paper used at the local automated teller machine counters of India were analyzed for the presence of BPA, and the capability of the paper to produce estrogenicity were assessed using a yeast two-hybrid assay experimental system. The study also focused on eliminating the endocrine-disrupting properties with partially purified laccase from newly isolated ascomycete fungi. The results indicate that these papers can produce estrogen hormone-like effect on experimental systems. It should be noted that on a daily basis, tons of such receipts are being dumped in the environment. Estrogenic properties of thermal paper were effectively removed from the reaction mixture within 3 h of incubation with the partially purified enzyme. We propose the utilization of waste thermal paper as a cheap substrate for laccase production for a safer and cleaner environment.

  8. A Study on Developing Learning Strategies in Violin Education

    Science.gov (United States)

    Afacan, Senol; Cilden, Seyda

    2018-01-01

    This study was conducted for the purpose of developing a valid and reliable learning strategies scale for students receiving violin education in Departments of Music at Fine Arts High Schools. The scale was applied to 391 violin students receiving education in the 11th and 12th grades in Departments of Music at Fine Arts High Schools in the…

  9. The acoustics of the violin: a review

    International Nuclear Information System (INIS)

    Woodhouse, Jim

    2014-01-01

    To understand the design and function of the violin requires investigation of a range of scientific questions. This paper presents a review: the relevant physics covers the nonlinear vibration of a bowed string, the vibration of the instrument body, and the consequent sound radiation. Questions of discrimination and preference by listeners and players require additional studies using the techniques of experimental psychology, and these are also touched on in the paper. To address the concerns of players and makers of instruments requires study of the interaction of all these factors, coming together in the concept of ‘playability’ of an instrument. (review article)

  10. The acoustics of the violin: a review

    Science.gov (United States)

    Woodhouse, Jim

    2014-11-01

    To understand the design and function of the violin requires investigation of a range of scientific questions. This paper presents a review: the relevant physics covers the nonlinear vibration of a bowed string, the vibration of the instrument body, and the consequent sound radiation. Questions of discrimination and preference by listeners and players require additional studies using the techniques of experimental psychology, and these are also touched on in the paper. To address the concerns of players and makers of instruments requires study of the interaction of all these factors, coming together in the concept of ‘playability’ of an instrument.

  11. Structural Inference in the Art of Violin Making.

    Science.gov (United States)

    Morse-Fortier, Leonard Joseph

    The "secrets" of success of early Italian violins have long been sought. Among their many efforts to reproduce the results of Stradiveri, Guarneri, and Amati, luthiers have attempted to order and match natural resonant frequencies in the free violin plates. This tap-tone plate tuning technique is simply an eigenvalue extraction scheme. In the final stages of carving, the violin maker complements considerable intuitive knowledge of violin plate structure and of modal attributes with tap-tone frequency estimates to better understand plate structure and to inform decisions about plate carving and completeness. Examining the modal attributes of violin plates, this work develops and incorporates an impulse-response scheme for modal inference, measures resonant frequencies and modeshapes for a pair of violin plates, and presents modeshapes through a unique computer visualization scheme developed specifically for this purpose. The work explores, through simple examples questions of how plate modal attributes reflect underlying structure, and questions about the so -called evolution of modeshapes and frequencies through assembly of the violin. Separately, the work develops computer code for a carved, anisotropic, plate/shell finite element. Solutions are found to the static displacement and free-vibration eigenvalue problems for an orthotropic plate, and used to verify element accuracy. Finally, a violin back plate is modelled with full consideration of plate thickness and arching. Model estimates for modal attributes compare very well against experimentally acquired values. Finally, the modal synthesis technique is applied to predicting the modal attributes of the violin top plate with ribs attached from those of the top plate alone, and with an estimate of rib mass and stiffness. This last analysis serves to verify the modal synthesis method, and to quantify its limits of applicability in attempting to solve problems with severe structural modification. Conclusions

  12. Bioinformatics analysis of Brucella vaccines and vaccine targets using VIOLIN.

    Science.gov (United States)

    He, Yongqun; Xiang, Zuoshuang

    2010-09-27

    Brucella spp. are Gram-negative, facultative intracellular bacteria that cause brucellosis, one of the commonest zoonotic diseases found worldwide in humans and a variety of animal species. While several animal vaccines are available, there is no effective and safe vaccine for prevention of brucellosis in humans. VIOLIN (http://www.violinet.org) is a web-based vaccine database and analysis system that curates, stores, and analyzes published data of commercialized vaccines, and vaccines in clinical trials or in research. VIOLIN contains information for 454 vaccines or vaccine candidates for 73 pathogens. VIOLIN also contains many bioinformatics tools for vaccine data analysis, data integration, and vaccine target prediction. To demonstrate the applicability of VIOLIN for vaccine research, VIOLIN was used for bioinformatics analysis of existing Brucella vaccines and prediction of new Brucella vaccine targets. VIOLIN contains many literature mining programs (e.g., Vaxmesh) that provide in-depth analysis of Brucella vaccine literature. As a result of manual literature curation, VIOLIN contains information for 38 Brucella vaccines or vaccine candidates, 14 protective Brucella antigens, and 68 host response studies to Brucella vaccines from 97 peer-reviewed articles. These Brucella vaccines are classified in the Vaccine Ontology (VO) system and used for different ontological applications. The web-based VIOLIN vaccine target prediction program Vaxign was used to predict new Brucella vaccine targets. Vaxign identified 14 outer membrane proteins that are conserved in six virulent strains from B. abortus, B. melitensis, and B. suis that are pathogenic in humans. Of the 14 membrane proteins, two proteins (Omp2b and Omp31-1) are not present in B. ovis, a Brucella species that is not pathogenic in humans. Brucella vaccine data stored in VIOLIN were compared and analyzed using the VIOLIN query system. Bioinformatics curation and ontological representation of Brucella vaccines

  13. The Hutchins-Schelleng Violin Octet After 50 Years

    Science.gov (United States)

    Burns, Kevin; Maybury, Mark

    Scientifically speaking, the Hutchins-Schelleng violin octet is the most interesting of all the bowed string instruments. We refer specifically to those instruments resulting from the first application of physics to the design of bowed string instruments, viz., the scientific resonance scaling process developed by John Schelleng to dimension the violin - certainly the most “successful” and mature bowed string instrument - to cover a 3½ octave range.

  14. A Real-Time Thermal Self-Elimination Method for Static Mode Operated Freestanding Piezoresistive Microcantilever-Based Biosensors.

    Science.gov (United States)

    Ku, Yu-Fu; Huang, Long-Sun; Yen, Yi-Kuang

    2018-02-28

    Here, we provide a method and apparatus for real-time compensation of the thermal effect of single free-standing piezoresistive microcantilever-based biosensors. The sensor chip contained an on-chip fixed piezoresistor that served as a temperature sensor, and a multilayer microcantilever with an embedded piezoresistor served as a biomolecular sensor. This method employed the calibrated relationship between the resistance and the temperature of piezoresistors to eliminate the thermal effect on the sensor, including the temperature coefficient of resistance (TCR) and bimorph effect. From experimental results, the method was verified to reduce the signal of thermal effect from 25.6 μV/°C to 0.3 μV/°C, which was approximately two orders of magnitude less than that before the processing of the thermal elimination method. Furthermore, the proposed approach and system successfully demonstrated its effective real-time thermal self-elimination on biomolecular detection without any thermostat device to control the environmental temperature. This method realizes the miniaturization of an overall measurement system of the sensor, which can be used to develop portable medical devices and microarray analysis platforms.

  15. A Real-Time Thermal Self-Elimination Method for Static Mode Operated Freestanding Piezoresistive Microcantilever-Based Biosensors

    Directory of Open Access Journals (Sweden)

    Yu-Fu Ku

    2018-02-01

    Full Text Available Here, we provide a method and apparatus for real-time compensation of the thermal effect of single free-standing piezoresistive microcantilever-based biosensors. The sensor chip contained an on-chip fixed piezoresistor that served as a temperature sensor, and a multilayer microcantilever with an embedded piezoresistor served as a biomolecular sensor. This method employed the calibrated relationship between the resistance and the temperature of piezoresistors to eliminate the thermal effect on the sensor, including the temperature coefficient of resistance (TCR and bimorph effect. From experimental results, the method was verified to reduce the signal of thermal effect from 25.6 μV/°C to 0.3 μV/°C, which was approximately two orders of magnitude less than that before the processing of the thermal elimination method. Furthermore, the proposed approach and system successfully demonstrated its effective real-time thermal self-elimination on biomolecular detection without any thermostat device to control the environmental temperature. This method realizes the miniaturization of an overall measurement system of the sensor, which can be used to develop portable medical devices and microarray analysis platforms.

  16. SIGNIFICANT INFLUENCES OF VIOLIN EXTRACURRICULAR ACHIEVEMENT TO EMOTIONAL INTELLIGENCE

    Directory of Open Access Journals (Sweden)

    Nafik

    2014-06-01

    Full Text Available This research aims to find out (1 whether there is an influence between student’s achievements of learning violin toward their emotional intelligence, (2 whether there is a correlation between student’s achievement of learning violin and their emotional intelligence, and (3 how much contribution of student’s achievement of learning violin to their emotional intelligence. It is a qualitative research which is defined as a research method based on positivism philosophy which is used to study particular sample and population. The sample and population are drawn randomly using research instruments to collect data, and the data are analyzed statistically. This aims to examine the hypothesis defined. The finding shows that there is a significant influence between student’s achievement of learning violin and their emotional intelligence about 76.1%, while the rest of it 23.9% is influenced by other factors which are not studied in this research. It proves that learning violin influences student’s emotional intelligence very much and emotional intelligence is influential in increasing student’s achievement. From the data, it shows that most of the students participating in violin extracurricular are able to increase their learning achievement.

  17. The role of vibrato in the perception of violin quality

    Science.gov (United States)

    Gough, Colin E.

    2003-10-01

    The role of vibrato in the characterization of violin tone will be considered from both a physical acoustics and perceptual viewpoint. Musical examples of individual waveforms from violins of widely different qualities will be used to demonstrate the importance of vibrato and other temporal fluctuations in the recognition of the violin as a specific musical instrument and, by inference, of its perceived tonal quality also. Dynamic physical models will be introduced to describe the waveforms of sounds produced by the bowed string when vibrato is used. The sound produced by an individual instrument will be shown to be critically dependent on both the positions and the Q values of the acoustically important resonances excited, in addition to random noise generated by the bowing action. It will be argued that the temporal fluctuations in the sound of a violin played with vibrato are just as important as the temporal fluctuations associated with the very strong frequency-dependence of the directivity of the violin. Weinreich has emphasized the importance of the latter effect in any realistic reproduction of the sound of a violin.

  18. Intermolecula transfer and elimination of molecular hydrogen in thermal reactions of unsaturated organic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Suria, Sabartanty [Iowa State Univ., Ames, IA (United States)

    1995-02-10

    Two reactions which are important to coal liquefaction include intermolecular transfer and the elimination of two hydrogen atoms. We have designed several model reactions to probe the viability of several hydrogen transfer and elimination pathways. This report described studies on these reactions using organic model compounds.

  19. Violin mode amplitude glitch monitor for the presence of excess noise on the monolithic silica suspensions of GEO 600

    Energy Technology Data Exchange (ETDEWEB)

    Sorazu, B; Strain, K A; Heng, I S; Kumar, R, E-mail: b.sorazu@physics.gla.ac.u [Department of Physics and Astronomy, University of Glasgow, University Avenue, Glasgow G12 8QQ (United Kingdom)

    2010-08-07

    Non-Gaussian features of data from gravitational wave detectors are of interest as unpredictable 'glitches' limit the sensitivity of searches for many kinds of signal. We consider events due to non-random excitations of the test masses and their suspension fibres. These events could, for example, be related to acoustic emissions in the fibres due to the presence and propagation of cracks or another type of structural perturbation, and they would generate excess noise above the Gaussian background, which matches the level expected due to thermal noise. We look for excess noise in the fundamental violin modes of the monolithic silica suspension fibres of GEO 600. We describe the algorithm used to monitor the violin mode amplitude for glitches, present our results and consider how these may be applied to advanced detectors. The conclusion of our analysis is that no excess noise above what was considered to be thermal noise was observed for several days of h(t) data analysed at the frequency of the selected violin modes.

  20. Violin mode amplitude glitch monitor for the presence of excess noise on the monolithic silica suspensions of GEO 600

    International Nuclear Information System (INIS)

    Sorazu, B; Strain, K A; Heng, I S; Kumar, R

    2010-01-01

    Non-Gaussian features of data from gravitational wave detectors are of interest as unpredictable 'glitches' limit the sensitivity of searches for many kinds of signal. We consider events due to non-random excitations of the test masses and their suspension fibres. These events could, for example, be related to acoustic emissions in the fibres due to the presence and propagation of cracks or another type of structural perturbation, and they would generate excess noise above the Gaussian background, which matches the level expected due to thermal noise. We look for excess noise in the fundamental violin modes of the monolithic silica suspension fibres of GEO 600. We describe the algorithm used to monitor the violin mode amplitude for glitches, present our results and consider how these may be applied to advanced detectors. The conclusion of our analysis is that no excess noise above what was considered to be thermal noise was observed for several days of h(t) data analysed at the frequency of the selected violin modes.

  1. Violin mode amplitude glitch monitor for the presence of excess noise on the monolithic silica suspensions of GEO 600

    Science.gov (United States)

    Sorazu, B.; Strain, K. A.; Heng, I. S.; Kumar, R.

    2010-08-01

    Non-Gaussian features of data from gravitational wave detectors are of interest as unpredictable 'glitches' limit the sensitivity of searches for many kinds of signal. We consider events due to non-random excitations of the test masses and their suspension fibres. These events could, for example, be related to acoustic emissions in the fibres due to the presence and propagation of cracks or another type of structural perturbation, and they would generate excess noise above the Gaussian background, which matches the level expected due to thermal noise. We look for excess noise in the fundamental violin modes of the monolithic silica suspension fibres of GEO 600. We describe the algorithm used to monitor the violin mode amplitude for glitches, present our results and consider how these may be applied to advanced detectors. The conclusion of our analysis is that no excess noise above what was considered to be thermal noise was observed for several days of h(t) data analysed at the frequency of the selected violin modes.

  2. Imitation, genetic lineages, and time influenced the morphological evolution of the violin.

    Science.gov (United States)

    Chitwood, Daniel H

    2014-01-01

    Violin design has been in flux since the production of the first instruments in 16th century Italy. Numerous innovations have improved the acoustical properties and playability of violins. Yet, other attributes of the violin affect its performance less, and with fewer constraints, are potentially more sensitive to historical vagaries unrelated to quality. Although the coarse shape of violins is integral to their design, details of the body outline can vary without significantly compromising sound quality. What can violin shapes tell us about their makers and history, including the degree that luthiers have influenced each other and the evolution of complex morphologies over time? Here, I provide an analysis of morphological evolution in the violin family, sampling the body shapes of over 9,000 instruments over 400 years of history. Specific shape attributes, which discriminate instruments produced by different luthiers, strongly correlate with historical time. Linear discriminant analysis reveals luthiers who likely copied the outlines of their instruments from others, which historical accounts corroborate. Clustering of averaged violin shapes places luthiers into four major groups, demonstrating a handful of discrete shapes predominate in most instruments. Violin shapes originating from multi-generational luthier families tend to cluster together, and familial origin is a significant explanatory factor of violin shape. Together, the analysis of four centuries of violin shapes demonstrates not only the influence of history and time leading to the modern violin, but widespread imitation and the transmission of design by human relatedness.

  3. Imitation, genetic lineages, and time influenced the morphological evolution of the violin.

    Directory of Open Access Journals (Sweden)

    Daniel H Chitwood

    Full Text Available Violin design has been in flux since the production of the first instruments in 16th century Italy. Numerous innovations have improved the acoustical properties and playability of violins. Yet, other attributes of the violin affect its performance less, and with fewer constraints, are potentially more sensitive to historical vagaries unrelated to quality. Although the coarse shape of violins is integral to their design, details of the body outline can vary without significantly compromising sound quality. What can violin shapes tell us about their makers and history, including the degree that luthiers have influenced each other and the evolution of complex morphologies over time? Here, I provide an analysis of morphological evolution in the violin family, sampling the body shapes of over 9,000 instruments over 400 years of history. Specific shape attributes, which discriminate instruments produced by different luthiers, strongly correlate with historical time. Linear discriminant analysis reveals luthiers who likely copied the outlines of their instruments from others, which historical accounts corroborate. Clustering of averaged violin shapes places luthiers into four major groups, demonstrating a handful of discrete shapes predominate in most instruments. Violin shapes originating from multi-generational luthier families tend to cluster together, and familial origin is a significant explanatory factor of violin shape. Together, the analysis of four centuries of violin shapes demonstrates not only the influence of history and time leading to the modern violin, but widespread imitation and the transmission of design by human relatedness.

  4. Perceived Articulation Uniformity between Trumpet and Violin Performances

    Science.gov (United States)

    Cooper, Shelly C.; Hamann, Donald L.

    2010-01-01

    Directors strive for a unified sound throughout their wind and orchestra ensembles. Articulation affects sound uniformity among winds and strings. This baseline study examined whether a trumpet player could better match a violin player's articulation, as perceived by participants listening to a recording of two performances, when: (a) performing…

  5. Perceptual studies of violin body damping and vibrato.

    Science.gov (United States)

    Fritz, Claudia; Woodhouse, Jim; Cheng, Felicia P-H; Cross, Ian; Blackwell, Alan F; Moore, Brian C J

    2010-01-01

    This work explored how the perception of violin notes is influenced by the magnitude of the applied vibrato and by the level of damping of the violin resonance modes. Damping influences the "peakiness" of the frequency response, and vibrato interacts with this peakiness by producing fluctuations in spectral content as well as in frequency and amplitude. Initially, it was shown that thresholds for detecting a change in vibrato amplitude were independent of body damping, and thresholds for detecting a change in body damping were independent of vibrato amplitude. A study of perceptual similarity using triadic comparison showed that vibrato amplitude and damping were largely perceived as independent dimensions. A series of listening tests was conducted employing synthesized, recorded, or live performance to probe perceptual responses in terms of "liveliness" and preference. The results do not support the conclusion that liveliness results from the combination of the use of vibrato and a "peaky" violin response. Judgments based on listening to single notes showed inconsistent patterns for liveliness, while preferences were highest for damping that was slightly less than for a reference (real) violin. In contrast, judgments by players based on many notes showed preference for damping close to the reference value.

  6. Liquid Metal Machine Triggered Violin-Like Wire Oscillator.

    Science.gov (United States)

    Yuan, Bin; Wang, Lei; Yang, Xiaohu; Ding, Yujie; Tan, Sicong; Yi, Liting; He, Zhizhu; Liu, Jing

    2016-10-01

    The first ever oscillation phenomenon of a copper wire embraced inside a self-powered liquid metal machine is discovered. When contacting a copper wire to liquid metal machine, it would be swallowed inside and then reciprocally moves back and forth, just like a violin bow. Such oscillation could be easily regulated by touching a steel needle on the liquid metal surface.

  7. Violin Pedagogy and the Physics of the Bowed String

    Science.gov (United States)

    McLeod, Alexander Rhodes

    The paper describes the mechanics of violin tone production using non-specialist language, in order to present a scientific understanding of tone production accessible to a broad readership. As well as offering an objective understanding of tone production, this model provides a powerful tool for analyzing the technique of string playing. The interaction between the bow and the string is quite complex. Literature reviewed for this study reveals that scientific investigations have provided important insights into the mechanics of string playing, offering explanations for factors which both contribute to and limit the range of tone colours and dynamics that stringed instruments can produce. Also examined in the literature review are significant works of twentieth century violin pedagogy exploring tone production on the violin, based on the practical experience of generations of teachers and performers. Hermann von Helmholtz described the stick-slip cycle which drives the string in 1863, which replaced earlier ideas about the vibration of violin strings. Later, scientists such as John Schelleng and Lothar Cremer were able to demonstrate how the mechanics of the bow-string interaction can create different tone colours. Recent research by Anders Askenfelt, Knut Guettler, and Erwin Schoonderwaldt have continued to refine earlier research in this area. The writings of Lucien Capet, Leopold Auer, Carl Flesch, Paul Rolland, Kato Havas, Ivan Galamian, and Simon Fischer are examined and analyzed. Each author describes a different approach to tone production on the violin, representing a different understanding of the underlying mechanism. Analyzing these writings within the context of a scientific understanding of tone production makes it possible to compare these approaches more consistently, and to synthesize different concepts drawn from the diverse sources evaluated.

  8. From Bows to Sound-Chests: Tracing the Ancestry of the Violin

    Directory of Open Access Journals (Sweden)

    Janelle R. Finley

    2016-04-01

    Full Text Available The ancestry of the violin is a subject that has been studied, researched, debated, and written about in great detail. However, despite all of the research and study, the ancestry of the violin is still not certain. This paper presents two schools of thought that propose different theories as to how the ancestry of the violin should be determined and what instruments should be included in the ancestry of the violin. The first school of thought proposes that the violin’s ancestry should be traced through the bow. The second theory proposes that the violin’s ancestry should be traced through the sound-chest of the violin. This paper also presents the different arguments for and against each theory, the importance of this topic, and the paper’s position on this topic. Research for this paper was accomplished through the use of scholarly books on the subject of the history of the violin.

  9. Evolution of the violin: The law of effect in action.

    Science.gov (United States)

    Wasserman, Edward A; Cullen, Patrick

    2016-01-01

    As is true for most other human inventions, the origin of the violin is unknown. What is known is that this popular and versatile instrument has notably changed over the course of several hundred years. At issue is whether those evolutionary changes in the construction of the violin are the result of premeditated, intelligent design or whether they arose through a trial-and-error process. Recent scientific evidence favors the latter account. Our perspective piece puts these recent empirical findings into a comprehensive selectionist framework. According to this view, the many things we do and make--like violins--arise from a process of variation and selection which accords with the law of effect. Contrary to popular opinion, there is neither mystique nor romance in this process; it is as fundamental and ubiquitous as the law of natural selection. As with the law of natural selection in the evolution of organisms, there is staunch resistance to the role of the law of effect in the evolution of human inventions. We conclude our piece by considering several objections to our perspective. (c) 2016 APA, all rights reserved).

  10. THE INTONATIONAL ORGANIZATION IN THE VIOLIN CONCERTO MOMENTS

    Directory of Open Access Journals (Sweden)

    CIOBANU GHENADIE

    2017-06-01

    Full Text Available The article examines the intonational organization of the Concerto for Violin and Symphony Orchestra „Moments”. A perspective of the analysis of the intonational system of the Concerto refers to highlighting the traditional narrative types, such as the meditative monolog, dialogue, motion etc. that are closely related to the concept and imagistic world of the work. Likewise, the personification of the soloist instrument in an instrumental concerto is determined mostly by the intonation system used by the composer in his work. The concretization of the intonations, their combination and integration into an actual system of meanings forms the musical work issues. At the same time, the intonation system reflects the ideas, images and sound collisions of the work. The „new tone” is an objectivity and constitutes the expression of a new melodic-harmonic organizational order of the sound material. The intonation of a musical work consists of the combination of specific properties generated from compositional practices. In the contemporary history of music there is a variety of individual systems of organizing the soundpitch. These specific intonation systems, however, are based on some common principles of organization. The personification of solo instrument in terms of intonation becomes an important task for a composer in the genre of concerto. A concern for the composers in the concertos for violin and orchestra refers to the methods influencing the violin intonation sonority in terms of the orchestral context in which the solo instrument is placed.

  11. COMPOSITION PECULIARITIES IN THE SONATA C-MOLL FOR VIOLIN AND PIANO BY KONSTANTIN ROMANOV

    Directory of Open Access Journals (Sweden)

    ŢIRCUNOVA SVETLANA

    2015-06-01

    Full Text Available The author analyzes the Sonata for Violin and Piano by Konstantin Romanov written in Chisinau in 1920s. This is one of the first works known in national music in the genre of sonata for violin, written on the territory of the Republic of Moldova. The work is considered in terms of its musical form built in the classical traditions.

  12. Updates on the web-based VIOLIN vaccine database and analysis system.

    Science.gov (United States)

    He, Yongqun; Racz, Rebecca; Sayers, Samantha; Lin, Yu; Todd, Thomas; Hur, Junguk; Li, Xinna; Patel, Mukti; Zhao, Boyang; Chung, Monica; Ostrow, Joseph; Sylora, Andrew; Dungarani, Priya; Ulysse, Guerlain; Kochhar, Kanika; Vidri, Boris; Strait, Kelsey; Jourdian, George W; Xiang, Zuoshuang

    2014-01-01

    The integrative Vaccine Investigation and Online Information Network (VIOLIN) vaccine research database and analysis system (http://www.violinet.org) curates, stores, analyses and integrates various vaccine-associated research data. Since its first publication in NAR in 2008, significant updates have been made. Starting from 211 vaccines annotated at the end of 2007, VIOLIN now includes over 3240 vaccines for 192 infectious diseases and eight noninfectious diseases (e.g. cancers and allergies). Under the umbrella of VIOLIN, >10 relatively independent programs are developed. For example, Protegen stores over 800 protective antigens experimentally proven valid for vaccine development. VirmugenDB annotated over 200 'virmugens', a term coined by us to represent those virulence factor genes that can be mutated to generate successful live attenuated vaccines. Specific patterns were identified from the genes collected in Protegen and VirmugenDB. VIOLIN also includes Vaxign, the first web-based vaccine candidate prediction program based on reverse vaccinology. VIOLIN collects and analyzes different vaccine components including vaccine adjuvants (Vaxjo) and DNA vaccine plasmids (DNAVaxDB). VIOLIN includes licensed human vaccines (Huvax) and veterinary vaccines (Vevax). The Vaccine Ontology is applied to standardize and integrate various data in VIOLIN. VIOLIN also hosts the Ontology of Vaccine Adverse Events (OVAE) that logically represents adverse events associated with licensed human vaccines.

  13. Observable Flow Experience in a Two-Year-Old Japanese Child's Violin Playing

    Science.gov (United States)

    Akutsu, Taichi

    2018-01-01

    This study investigated the flow experience of Jiro, a 2-year-old Japanese boy, regarding his violin playing in a social context. In this study, Jiro's violin playing was videotaped at home and during musical sessions for young children and families, guided by the author as a violinist-teacher-researcher. The method adopted a single case study…

  14. Method for measuring violin sound radiation based on bowed glissandi and its application to sound synthesis.

    Science.gov (United States)

    Perez Carrillo, Alfonso; Bonada, Jordi; Patynen, Jukka; Valimaki, Vesa

    2011-08-01

    This work presents a method for measuring and computing violin-body directional frequency responses, which are used for violin sound synthesis. The approach is based on a frame-weighted deconvolution of excitation and response signals. The excitation, consisting of bowed glissandi, is measured with piezoelectric transducers built into the bridge. Radiation responses are recorded in an anechoic chamber with multiple microphones placed at different angles around the violin. The proposed deconvolution algorithm computes impulse responses that, when convolved with any source signal (captured with the same transducer), produce a highly realistic violin sound very similar to that of a microphone recording. The use of motion sensors allows for tracking violin movements. Combining this information with the directional responses and using a dynamic convolution algorithm, helps to improve the listening experience by incorporating the violinist motion effect in stereo.

  15. Wood densitometry in 17th and 18th century Dutch, German, Austrian and French violins, compared to classical Cremonese and modern violins.

    Directory of Open Access Journals (Sweden)

    Berend C Stoel

    Full Text Available Classical violins produced by makers such as Antonio Stradivari and Guarneri del Gesu have long been considered the epitome of the luthier's art and the expressive tool of choice for the most celebrated violinists. It has been speculated these makers had access to wood that was unique in some way and that this was responsible for their acclaimed tonal characteristics. In an attempt to discern whether the above conjecture is true, we analyzed 17 modern and classical Dutch, German, Austrian and French violins by wood densitometry using computed tomography and correlated these results with our previous study of modern and Cremonese violins; in all studying 30 instruments of the violin family. In order to make this comparison possible we developed methods to cross calibrate results from different CT manufacturers using calibration wood pieces. We found no significant differences in median densities between modern and classical violins, or between classical violins from different origins. These results suggest that it is unlikely classical Cremonese makers had access to wood with significantly different wood density characteristics than that available to contemporaneous or modern makers.

  16. Wood densitometry in 17th and 18th century Dutch, German, Austrian and French violins, compared to classical Cremonese and modern violins.

    Science.gov (United States)

    Stoel, Berend C; Borman, Terry M; de Jongh, Ronald

    2012-01-01

    Classical violins produced by makers such as Antonio Stradivari and Guarneri del Gesu have long been considered the epitome of the luthier's art and the expressive tool of choice for the most celebrated violinists. It has been speculated these makers had access to wood that was unique in some way and that this was responsible for their acclaimed tonal characteristics. In an attempt to discern whether the above conjecture is true, we analyzed 17 modern and classical Dutch, German, Austrian and French violins by wood densitometry using computed tomography and correlated these results with our previous study of modern and Cremonese violins; in all studying 30 instruments of the violin family. In order to make this comparison possible we developed methods to cross calibrate results from different CT manufacturers using calibration wood pieces. We found no significant differences in median densities between modern and classical violins, or between classical violins from different origins. These results suggest that it is unlikely classical Cremonese makers had access to wood with significantly different wood density characteristics than that available to contemporaneous or modern makers.

  17. Structural acoustics model of the violin radiativity profile.

    Science.gov (United States)

    Bissinger, George

    2008-12-01

    Violin radiativity profiles are dominated by the Helmholtz-like A0 cavity mode ( approximately 280 Hz), first corpus bending modes B1(-) and B1(+) ( approximately 500 Hz), and BH and bridge-filter peaks ( approximately 2.4 kHz and approximately 3.5 kHz, respectively), with falloff above approximately 4 kHz. The B1 modes-dependent on two low-lying free-plate modes--are proposed to excite A0 via coupling to B1-driven in-phase f-hole volume flows. VIOCADEAS data show that A0 radiativity increases primarily as A0-B1(-) frequency difference decreases, consistent with Meinel's 1937 experiment for too-thick/too-thin plate thicknesses, plus sound post removal and violin octet baritone results. The vibration-->acoustic energy filter, F(RAD), computed from shape-material-independent radiation and total damping, peaks at the critical frequency f(crit), estimated from a free-plate mode by analogy to flat-plate bending. Experimentally, f(crit) decreased as this plate mode (and B1(+)) frequency increased. Simulations show that increasing plate thicknesses lowers f(crit), reduces F(RAD), and moves the spectral balance toward lower frequencies. Incorporating string-->corpus filters (including bridge versus bridge-island impedances) provides a model for overall violin radiativity. This model-with B1 and A0-B1 couplings, and f(crit) (computed from a free-plate mode important to B1) strongly affecting the lowest and highest parts of the radiativity profile-substantiates prior empirical B1--sound quality linkages.

  18. Anton Stepanovich Arensky : Violin Concerto in A minor, Op.54

    OpenAIRE

    Vojtovicova, Maria

    2017-01-01

    I have chosen Anton Stepanovich Arensky and his Violin Concerto in A minor as an object of my practical and theoretical final project in Metropolia University of Applied Sciences for a very simple reason and that is, I believe he and his concert never got the attention they deserve. In the beginning of the thesis I go briefly through Arensky’s life and his entire work as there is not a lot known of him and we have very limited sources of information due to his short life and lack of inte...

  19. Perceptual thresholds for detecting modifications applied to the acoustical properties of a violin.

    Science.gov (United States)

    Fritz, Claudia; Cross, Ian; Moore, Brian C J; Woodhouse, Jim

    2007-12-01

    This study is the first step in the psychoacoustic exploration of perceptual differences between the sounds of different violins. A method was used which enabled the same performance to be replayed on different "virtual violins," so that the relationships between acoustical characteristics of violins and perceived qualities could be explored. Recordings of real performances were made using a bridge-mounted force transducer, giving an accurate representation of the signal from the violin string. These were then played through filters corresponding to the admittance curves of different violins. Initially, limits of listener performance in detecting changes in acoustical characteristics were characterized. These consisted of shifts in frequency or increases in amplitude of single modes or frequency bands that have been proposed previously to be significant in the perception of violin sound quality. Thresholds were significantly lower for musically trained than for nontrained subjects but were not significantly affected by the violin used as a baseline. Thresholds for the musicians typically ranged from 3 to 6 dB for amplitude changes and 1.5%-20% for frequency changes. Interpretation of the results using excitation patterns showed that thresholds for the best subjects were quite well predicted by a multichannel model based on optimal processing.

  20. Investigating the role of auditory and tactile modalities in violin quality evaluation.

    Science.gov (United States)

    Wollman, Indiana; Fritz, Claudia; Poitevineau, Jacques; McAdams, Stephen

    2014-01-01

    The role of auditory and tactile modalities involved in violin playing and evaluation was investigated in an experiment employing a blind violin evaluation task under different conditions: i) normal playing conditions, ii) playing with auditory masking, and iii) playing with vibrotactile masking. Under each condition, 20 violinists evaluated five violins according to criteria related to violin playing and sound characteristics and rated their overall quality and relative preference. Results show that both auditory and vibrotactile feedback are important in the violinists' evaluations but that their relative importance depends on the violinist, the violin and the type of evaluation (different criteria ratings or preference). In this way, the overall quality ratings were found to be accurately predicted by the rating criteria, which also proved to be perceptually relevant to violinists, but were poorly correlated with the preference ratings; this suggests that the two types of ratings (overall quality vs preference) may stem from different decision-making strategies. Furthermore, the experimental design confirmed that violinists agree more on the importance of criteria in their overall evaluation than on their actual ratings for different violins. In particular, greater agreement was found on the importance of criteria related to the sound of the violin. Nevertheless, this study reveals that there are fundamental differences in the way players interpret and evaluate each criterion, which may explain why correlating physical properties with perceptual properties has been challenging so far in the field of musical acoustics.

  1. A comparison of wood density between classical Cremonese and modern violins.

    Directory of Open Access Journals (Sweden)

    Berend C Stoel

    Full Text Available Classical violins created by Cremonese masters, such as Antonio Stradivari and Giuseppe Guarneri Del Gesu, have become the benchmark to which the sound of all violins are compared in terms of their abilities of expressiveness and projection. By general consensus, no luthier since that time has been able to replicate the sound quality of these classical instruments. The vibration and sound radiation characteristics of a violin are determined by an instrument's geometry and the material properties of the wood. New test methods allow the non-destructive examination of one of the key material properties, the wood density, at the growth ring level of detail. The densities of five classical and eight modern violins were compared, using computed tomography and specially developed image-processing software. No significant differences were found between the median densities of the modern and the antique violins, however the density difference between wood grains of early and late growth was significantly smaller in the classical Cremonese violins compared with modern violins, in both the top (Spruce and back (Maple plates (p = 0.028 and 0.008, respectively. The mean density differential (SE of the top plates of the modern and classical violins was 274 (26.6 and 183 (11.7 gram/liter. For the back plates, the values were 128 (2.6 and 115 (2.0 gram/liter. These differences in density differentials may reflect similar changes in stiffness distributions, which could directly impact vibrational efficacy or indirectly modify sound radiation via altered damping characteristics. Either of these mechanisms may help explain the acoustical differences between the classical and modern violins.

  2. Coordination in fast repetitive violin-bowing patterns.

    Science.gov (United States)

    Schoonderwaldt, Erwin; Altenmüller, Eckart

    2014-01-01

    We present a study of coordination behavior in complex violin-bowing patterns involving simultaneous bow changes (reversal of bowing direction) and string crossings (changing from one string to another). Twenty-two violinists (8 advanced amateurs, 8 students with violin as major subject, and 6 elite professionals) participated in the experiment. We investigated the influence of a variety of performance conditions (specific bowing patterns, dynamic level, tempo, and transposition) and level of expertise on coordination behavior (a.o., relative phase and amplitude) and stability. It was found that the general coordination behavior was highly consistent, characterized by a systematic phase lead of bow inclination over bow velocity of about 15° (i.e., string crossings were consistently timed earlier than bow changes). Within similar conditions, a high individual consistency was found, whereas the inter-individual agreement was considerably less. Furthermore, systematic influences of performance conditions on coordination behavior and stability were found, which could be partly explained in terms of particular performance constraints. Concerning level of expertise, only subtle differences were found, the student and professional groups (higher level of expertise) showing a slightly higher stability than the amateur group (lower level of expertise). The general coordination behavior as observed in the current study showed a high agreement with perceptual preferences reported in an earlier study to similar bowing patterns, implying that complex bowing trajectories for an important part emerge from auditory-motor interaction.

  3. Coordination in fast repetitive violin-bowing patterns.

    Directory of Open Access Journals (Sweden)

    Erwin Schoonderwaldt

    Full Text Available We present a study of coordination behavior in complex violin-bowing patterns involving simultaneous bow changes (reversal of bowing direction and string crossings (changing from one string to another. Twenty-two violinists (8 advanced amateurs, 8 students with violin as major subject, and 6 elite professionals participated in the experiment. We investigated the influence of a variety of performance conditions (specific bowing patterns, dynamic level, tempo, and transposition and level of expertise on coordination behavior (a.o., relative phase and amplitude and stability. It was found that the general coordination behavior was highly consistent, characterized by a systematic phase lead of bow inclination over bow velocity of about 15° (i.e., string crossings were consistently timed earlier than bow changes. Within similar conditions, a high individual consistency was found, whereas the inter-individual agreement was considerably less. Furthermore, systematic influences of performance conditions on coordination behavior and stability were found, which could be partly explained in terms of particular performance constraints. Concerning level of expertise, only subtle differences were found, the student and professional groups (higher level of expertise showing a slightly higher stability than the amateur group (lower level of expertise. The general coordination behavior as observed in the current study showed a high agreement with perceptual preferences reported in an earlier study to similar bowing patterns, implying that complex bowing trajectories for an important part emerge from auditory-motor interaction.

  4. Laser vibrometry measurements of vibration and sound fields of a bowed violin

    Science.gov (United States)

    Gren, Per; Tatar, Kourosh; Granström, Jan; Molin, N.-E.; Jansson, Erik V.

    2006-04-01

    Laser vibrometry measurements on a bowed violin are performed. A rotating disc apparatus, acting as a violin bow, is developed. It produces a continuous, long, repeatable, multi-frequency sound from the instrument that imitates the real bow-string interaction for a 'very long bow'. What mainly differs is that the back and forward motion of the real bow is replaced by the rotating motion with constant velocity of the disc and constant bowing force (bowing pressure). This procedure is repeatable. It is long lasting and allows laser vibrometry techniques to be used, which measure forced vibrations by bowing at all excited frequencies simultaneously. A chain of interacting parts of the played violin is studied: the string, the bridge and the plates as well as the emitted sound field. A description of the mechanics and the sound production of the bowed violin is given, i.e. the production chain from the bowed string to the produced tone.

  5. Measurements of effective noise temperature in fused silica fiber violin modes

    Energy Technology Data Exchange (ETDEWEB)

    Bilenko, I.A.; Lourie, S.L

    2002-11-25

    The results of measurements of the effective noise temperature in fused silica fiber violin modes are presented. In these measurements the fibers were stressed and value of the effective noise temperature was obtained by direct observation of oscillations in the fundamental violin modes of several samples. Measured values indicate that effective noise temperature does not exceed the room temperature significantly. This result is important for the design of the advanced gravitational wave antennae.

  6. Observation of Motion of Bowed Strings and Resonant Strings in Violin Performances

    Science.gov (United States)

    Matsutani, Akihiro

    2013-10-01

    The motion of a bowed string and a resonant string of a violin were simultaneously observed for the first time. The results of the direct observation of string motion in double stops and harmonics are also presented. The importance of the resonance was experimentally demonstrated from these observations. It is suggested that players should take account of the resonance and ideal Helmholtz motion in violin performances.

  7. Enhacing spectral sintesis techniques with performance gestures using the violin as a case study

    OpenAIRE

    Pérez Carrillo, Alfonso Antonio

    2009-01-01

    In this work we investigate new sound synthesis techniques for imitating musical instruments using the violin as a case study. It is a multidisciplinary research, covering several fields such as spectral modeling, machine learning, analysis of musical gestures or musical acoustics. It addresses sound production with a very empirical approach, based on the analysis of performance gestures as well as on the measurement of acoustical properties of the violin. Based on the characteristics of the ...

  8. REGARDING A METHOD OF PERFORMING ON THE VIOLIN IN TRADITIONAL MUSIC

    Directory of Open Access Journals (Sweden)

    MIRONENCO IAROSLAV

    2016-06-01

    Full Text Available Following a field study in the village of Lozova, Străşeni, aimed at identifying the variants of a folk song recorded by I. Mironenko from an informant living in the village of Thamaha, North Caucasus — Russia, a village inhabited by Moldovans, the musicologist discovered a fiddler who demonstrated him a specific process of executation on the violin. This method is representative of an advanced level of interpretation on the violin.

  9. Nodal line optimization and its application to violin top plate design

    Science.gov (United States)

    Yu, Yonggyun; Jang, In Gwun; Kim, In Kyum; Kwak, Byung Man

    2010-10-01

    In the literature, most problems of structural vibration have been formulated to adjust a specific natural frequency: for example, to maximize the first natural frequency. In musical instruments like a violin; however, mode shapes are equally important because they are related to sound quality in the way that natural frequencies are related to the octave. The shapes of nodal lines, which represent the natural mode shapes, are generally known to have a unique feature for good violins. Among the few studies on mode shape optimization, one typical study addresses the optimization of nodal point location for reducing vibration in a one-dimensional beam structure. However, nodal line optimization, which is required in violin plate design, has not yet been considered. In this paper, the central idea of controlling the shape of the nodal lines is proposed and then applied to violin top plate design. Finite element model for a violin top plate was constructed using shell elements. Then, optimization was performed to minimize the square sum of the displacement of selected nodes located along the target nodal lines by varying the thicknesses of the top plate. We conducted nodal line optimization for the second and the fifth modes together at the same time, and the results showed that the nodal lines obtained match well with the target nodal lines. The information on plate thickness distribution from nodal line optimization would be valuable for tailored trimming of a violin top plate for the given performances.

  10. Dr. Franjo (Franz) Kresnik (1869-1943): a physician and a violin maker.

    Science.gov (United States)

    Skrobonja, Ante; Muzur, Amir

    2007-01-01

    Dr. Franjo (Franz) Kresnik (born Wien 1869 - died Rijeka 1943) was an excellent physician and a Central European intellectual, a bohemian mind whose two loves in life made him very special. His passions were medicine and violin making. Most of his life was spent in Susak (now a part of Rijeka, Croatia), where he worked, played music and studied the art of making stringed instruments. He visited Cremona on several occasions and studied a number of violins, drawings and tools made and used by old masters. For his profound knowledge of Cremonese violin making the Italians dubbed him "Uomo che legge violini" (The Man Who Can Read Violins). In his workshop he made fifty-two violins, two violas, two cellos and a string quartet. Some of these instruments are still played in Europe and America. The remaining violins and possessions (tools, manuscripts, drawings, literature and countless diplomas and certificates) have been kept in a memorial room at the Maritime and History Museum of the Croatian Littoral in Rijeka. In addition, a street near the Faculty of Medicine in Rijeka is named after Franjo Kresnik.

  11. Violin bridge mobility analysis under in-plane excitation.

    Science.gov (United States)

    Zhang, Cheng-Zhong; Zhang, Guang-Ming; Ye, Bang-Yan; Liang, Li-Dong

    2013-11-08

    The vibration of a violin bridge is a dynamic contact vibration with two interfaces: strings-bridge, and bridge feet-top plate. In this paper, the mobility of an isolated bridge under in-plane excitation is explored using finite element modeling based on the contact vibration model. Numerical results show that the dynamic contact stiffness in the two contact interfaces has a great impact on the bridge mobility. A main resonance peak is observed in the frequency range of 2-3 kHz in the frequency response of the isolated bridge when the contact stiffness is smaller than a critical threshold. The main resonance peak frequency is affected by the contact stiffness as well. In order to verify the numerical findings, a novel experimental system is then designed on the basis of a piezoelectric dynamometer for bridge mobility analysis. Experimental results confirm the impact of the dynamic contact stiffness on the bridge mobility.

  12. Violin Bridge Mobility Analysis under In-Plane Excitation

    Directory of Open Access Journals (Sweden)

    Cheng-Zhong Zhang

    2013-11-01

    Full Text Available The vibration of a violin bridge is a dynamic contact vibration with two interfaces: strings-bridge, and bridge feet-top plate. In this paper, the mobility of an isolated bridge under in-plane excitation is explored using finite element modeling based on the contact vibration model. Numerical results show that the dynamic contact stiffness in the two contact interfaces has a great impact on the bridge mobility. A main resonance peak is observed in the frequency range of 2–3 kHz in the frequency response of the isolated bridge when the contact stiffness is smaller than a critical threshold. The main resonance peak frequency is affected by the contact stiffness as well. In order to verify the numerical findings, a novel experimental system is then designed on the basis of a piezoelectric dynamometer for bridge mobility analysis. Experimental results confirm the impact of the dynamic contact stiffness on the bridge mobility.

  13. Design & Evaluation of an Accessible Hybrid Violin Platform

    DEFF Research Database (Denmark)

    Overholt, Daniel; Gelineck, Steven

    2014-01-01

    We introduce and describe the initial evaluation of a new accessible (easily replicable) augmented violin prototype. Our research is focused on the user experience when playing such hybrid physical- digital instruments, and exploration of novel interactive performance techniques. The goal of wider...... platform accessibility for players and other researchers is approached via a simple ‘do-it-yourself’ design described herein. All hardware and software elements are open- source, and the build process requires minimal electronics skills. Cost has also been kept to a minimum where possible. Our initial...... that incorporates orientation/gesture sensors as well, with the resulting sound amplified and rendered via small speakers mounted directly to the instrument. The platform combines all necessary elements for digitally-mediated interactive performance; the need for a traditional computer only arises when developing...

  14. DEVELOPMENT TRENDS OF THE CONCERTO FOR VIOLIN AND ORCHESTRA IN THE EUROPEAN MUSIC AND ITS EVOLUTION IN UKRAINE

    Directory of Open Access Journals (Sweden)

    LAPTEVA ANNA

    2017-12-01

    Full Text Available The paper is devoted to the evolution of the solo concerto for violin and orchestra genre in the European music since its origination till the present time. Tracing the genre development trends in almost all European countries, the author comes to the conclusion of the existence of certain regularities in the violin concerto development that are common for various national musical cultures. It enables us to reveal both individual genre peculiarities of the violin concerto and the specific features of the national cultures. Particular attention is paid to the development of the violin concerto in Ukraine.

  15. Characterisation of varnishes used in violins by pyrolysis-gas chromatography/mass spectrometry.

    Science.gov (United States)

    Chiavari, Giuseppe; Montalbani, Simona; Otero, Vanessa

    2008-12-01

    The correct characterisation and a detailed knowledge of the materials originally used in violin varnishes, like natural resins, is crucial for the conservation in museums and for a suitable restoration technique. The study presented here reports on the potential of pyrolysis (Py) coupled with gas chromatography (GC) and mass spectrometry (MS) for the identification of chemical markers of each resin; this technique is very sensitive and selective, it needs a small quantity of sample and does not require chemical treatments. To improve the chromatographic behaviour of polar compounds the derivatising agent tetramethylammonium hydroxide (TMAH) in combination with pyrolysis has been used, in the so-called TMAH thermochemolysis or thermally assisted hydrolysis and methylation (THM), or more simply pyrolysis-methylation. The natural resins studied were colophony, sandarac, manila copal, elemi, amber and benzoin, mainly composed of terpenic compounds, with the exception of the latter, composed of aromatic compounds. Many compounds were identified; in particular, methyl esters of resinous acids that, individually or in a group, can be used as chemical markers. However, through this technique it was not possible to distinguish between the sandarac and manila copal resins because their chromatographic behaviour is very similar. Finally, the procedure applied has been employed in the characterisation of original varnish samples.

  16. Eliminating armaments

    International Nuclear Information System (INIS)

    Adams, R.

    1998-01-01

    The end of Cold War induced optimistic projections concerning disarmament, elimination of nuclear weapons, elimination of massive inequities - poverty, hatred, racism. All these goals should be achieved simultaneously, but little has been achieved so far

  17. Dependence of sound characteristics on the bowing position in a violin

    Science.gov (United States)

    Roh, YuJi; Kim, Young H.

    2014-12-01

    A quantitative analysis of violin sounds produced for different bowing positions over the full length of a violin string has been carried out. An automated bowing machine was employed in order to keep the bowing parameters constant. A 3-dimensional profile of the frequency spectrum was introduced in order to characterize the violin's sound. We found that the fundamental frequency did not change for different bowing positions, whereas the frequencies of the higher harmonics were different. Bowing the string at 30 mm from the bridge produced musical sounds. The middle of the string was confirmed to be a dead zone, as reported in previous works. In addition, the quarter position was also found to be a dead zone. Bowing the string 90 mm from the bridge dominantly produces a fundamental frequency of 864 Hz and its harmonics.

  18. Effects of thermal annealing on elimination of deep defects in amorphous In–Ga–Zn–O thin-film transistors

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Haochun; Ide, Keisuke [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Hiramatsu, Hidenori [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Materials Research Center for Element Strategy, Tokyo Institute of Technology, Mailbox SE-6, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Ueda, Shigenori [National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Ohashi, Naoki [Materials Research Center for Element Strategy, Tokyo Institute of Technology, Mailbox SE-6, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Kumomi, Hideya [Materials Research Center for Element Strategy, Tokyo Institute of Technology, Mailbox SE-6, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Hosono, Hideo [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Materials Research Center for Element Strategy, Tokyo Institute of Technology, Mailbox SE-6, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Kamiya, Toshio, E-mail: tkamiya@msl.titech.ac.jp [Materials and Structures Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Materials Research Center for Element Strategy, Tokyo Institute of Technology, Mailbox SE-6, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan)

    2016-09-01

    We investigated the effects of thermal annealing for high-density subgap states in amorphous In–Ga–Zn–O (a-IGZO) films by focusing on low-quality defective films deposited without O{sub 2} supply (LQ films). It was found that most of the subgap states were thermally unstable and decreased dramatically by annealing at ≤ 400 °C in O{sub 2}. These defects (but with different shapes) were further reduced by 600 °C annealing, whose subgap states appeared similar to that of a-IGZO films deposited at an optimum condition (high quality, HQ films) and annealed at 300 °C. However, electron Hall mobilities and field-effect mobilities of their thin-film transistors (TFTs) were low for the LQ films/TFTs even annealed at 600 °C compared to those for the HQ films/TFTs. It implies that not only the subgap states but also heavier structural disorder deteriorated the electron transport in the LQ films. The present results also suggest that although a-IGZO deposition without O{sub 2} supply is sometimes employed in particular for DC sputtering, supplying some O{sub 2} gas would be better to produce good TFTs at lower temperatures. - Highlights: • Effects of thermal annealing on subgap states in a-In–Ga–Zn–O films were studied. • Hard X-ray photoemission spectroscopy was employed. • Low-quality films require annealing at 600 °C to make an operating transistor. • This temperature is much higher than those for high-quality films (300–400 °C). • The high temperature is required because some subgap states are very stable.

  19. Spider Silk Violin Strings with a Unique Packing Structure Generate a Soft and Profound Timbre

    Science.gov (United States)

    Osaki, Shigeyoshi

    2012-04-01

    We overcome the difficulties in pulling long draglines from spiders, twist bundles of dragline filaments, and succeed in preparing violin strings. The twisting is found to change the cross section shapes of filaments from circular to polygonal and to optimize the packing structure with no openings among filaments providing mechanically strong and elastic strings. The spider string signal peaks of overtones for the violin are relatively large at high frequencies, generating a soft and profound timbre. Such a preferable timbre is considered to be due to the unique polygonal packing structure which provides valuable knowledge for developing new types of materials.

  20. Constructing a "Fast Protocol" for Middle School Beginner Violin Classes in Japan

    Science.gov (United States)

    Akutsu, Taichi

    2018-01-01

    This study aimed to investigate the process of constructing a "fast-protocol" for violin instruction. Since learning string instruments has not been common, and because there are limited hours for music in Japanese schools, the author, a violinist, collaborated with the general music teacher at a middle school in the Tokyo metropolitan…

  1. Development of a Computer-Based Visualised Quantitative Learning System for Playing Violin Vibrato

    Science.gov (United States)

    Ho, Tracy Kwei-Liang; Lin, Huann-shyang; Chen, Ching-Kong; Tsai, Jih-Long

    2015-01-01

    Traditional methods of teaching music are largely subjective, with the lack of objectivity being particularly challenging for violin students learning vibrato because of the existence of conflicting theories. By using a computer-based analysis method, this study found that maintaining temporal coincidence between the intensity peak and the target…

  2. A Comparison of First and Third Position Approaches to Violin Instruction

    Science.gov (United States)

    Cowden, Robert L.

    1972-01-01

    Purpose of this study was to determine by means of a performance scale whether there would be a significant difference between the intonational and rhythmic achievement of fourth-grade students who began violin study in the first position and fourth-grade students who began in the third position. (Author/CB)

  3. On the Relationship between Technique and Style: The Case of the Violin

    Science.gov (United States)

    Johansson, Mats

    2015-01-01

    This article examines the formative interaction between instrumental technique and musical style by analysing different approaches to the violin/fiddle. It is argued that technique is constitutive of style and that musical concepts are intimately related to the accumulated experience of sensations associated with handling the instrument in a…

  4. Assessment of sensorimotor cortical representation asymmetries and motor skills in violin players.

    Science.gov (United States)

    Schwenkreis, Peter; El Tom, Susan; Ragert, Patrick; Pleger, Burkhard; Tegenthoff, Martin; Dinse, Hubert R

    2007-12-01

    As a model for use-dependent plasticity, the brains of professional musicians have been extensively studied to examine structural and functional adaptation to unique requirements of skilled performance. Here we provide a combination of data on motor performance and hand representation in the primary motor and somatosensory cortex of professional violin players, with the aim of assessing possible behavioural consequences of sensorimotor cortical asymmetries. We studied 15 healthy right-handed professional violin players and 35 healthy nonmusician controls. Motor and somatosensory cortex asymmetry was assessed by recording the motor output map after transcranial magnetic stimulation from a small hand muscle, and by dipole source localization of somatosensory evoked potentials after electrical stimulation of the median and ulnar nerves. Motor performance was examined using a series of standardized motor tasks covering different aspects of hand function. Violin players showed a significant right-larger-than-left asymmetry of the motor and somatosensory cortex, whereas nonmusician controls showed no significant interhemispheric difference. The amount of asymmetry in the motor and somatosensory cortices of musicians was significantly correlated. At the behavioural level, motor performance did not significantly differ between musicians and nonmusicians. The results support a use-dependent enlargement of the left hand representation in the sensorimotor cortex of violin players. However, these cortical asymmetries were not paralleled by accompanying altered asymmetries at a behavioural level, suggesting that the reorganisation might be task-specific and does not lead to improved motor abilities in general.

  5. Perceived Pitch of Violin and Cello Vibrato Tones among Music Majors

    Science.gov (United States)

    Geringer, John M.; MacLeod, Rebecca B.; Allen, Michael L.

    2010-01-01

    The purpose of this study was to investigate the perceived pitch of string vibrato tones. The authors used recordings of acoustic instruments (cello and violin) to provide both vibrato stimulus tones and the nonvibrato tones that listeners adjusted to match the perceived pitch of the vibrato stimuli. We were interested especially in whether there…

  6. Assessment of cervical range of motion, cervical core strength and scapular dyskinesia in violin players.

    Science.gov (United States)

    Tawde, Pooja; Dabadghav, Rachana; Bedekar, Nilima; Shyam, Ashok; Sancheti, Parag

    2016-12-01

    Playing the violin can lead to asymmetric postures which can affect the cervical range of motion, cervical core strength and scapular stability. The objective of the study was to assess the cervical range of motion, cervical core strength and scapular dyskinesia in violin players and non-players of the same age group. An inclinometer was used to assess the cervical range of motion, pressure biofeedback was used to assess cervical core strength and scapular dyskinesia was also assessed in 30 professional violin players (18-40 years) compared with 30 age-matched non-players. Analysis was done using an unpaired t test. Significant change was seen with respect to extension (p = 0.051), cervical core strength (p = 0.005), right (Rt) superior angle 0° (p = 0.004), Rt superior angle 45° (p = 0.015) and Rt inferior angle 90° (p = 0.013). This study shows a significant difference in extension range of motion and cervical core strength of violin players. Also, there was scapular dyskinesia seen at 0° and 45° right-side superior angle of the scapula and 90° right-side inferior angle of the scapula.

  7. The evolution of air resonance power efficiency in the violin and its ancestors.

    Science.gov (United States)

    Nia, Hadi T; Jain, Ankita D; Liu, Yuming; Alam, Mohammad-Reza; Barnas, Roman; Makris, Nicholas C

    2015-03-08

    The fact that acoustic radiation from a violin at air-cavity resonance is monopolar and can be determined by pure volume change is used to help explain related aspects of violin design evolution. By determining the acoustic conductance of arbitrarily shaped sound holes, it is found that air flow at the perimeter rather than the broader sound-hole area dominates acoustic conductance, and coupling between compressible air within the violin and its elastic structure lowers the Helmholtz resonance frequency from that found for a corresponding rigid instrument by roughly a semitone. As a result of the former, it is found that as sound-hole geometry of the violin's ancestors slowly evolved over centuries from simple circles to complex f-holes, the ratio of inefficient, acoustically inactive to total sound-hole area was decimated, roughly doubling air-resonance power efficiency. F-hole length then slowly increased by roughly 30% across two centuries in the renowned workshops of Amati, Stradivari and Guarneri, favouring instruments with higher air-resonance power, through a corresponding power increase of roughly 60%. By evolution-rate analysis, these changes are found to be consistent with mutations arising within the range of accidental replication fluctuations from craftsmanship limitations with subsequent selection favouring instruments with higher air-resonance power.

  8. Cognitive Levels Regarding Articulation Marks among Violin Students in Department of Music Education in Gazi University

    Science.gov (United States)

    Taninmis, Gamze Elif

    2016-01-01

    The purpose of this study is to determine violin students' cognitive levels about articulation marks in Department of Music Education, Fine Arts Education, Gazi Faculty of Education, Gazi University (GUGEF), and to identify the variables on which the cognitive levels vary. It is a descriptive research considering the study purpose, method and…

  9. The Conservation of Rhythm in Suzuki Violin Students: A Task Validation Study.

    Science.gov (United States)

    Nelson, David J.

    1984-01-01

    Twenty Suzuki violin students between four and eight years old were individually administered an author-designed rhythmic task and a series of standardized tasks that measured area and length conservation. The students' prior training was found to be less of a factor in rhythmic conservation than were age and area-length conservation. (Author/RM)

  10. Structural changes in cuticles on violin bow hair caused by wear.

    Science.gov (United States)

    Yamamoto, Tomoko; Sugiyama, Shigeru

    2010-01-01

    A bow with horse tail hair is used to play the violin. New and worn-out bow hairs were observed by atomic force microscopy. The cuticles of the new bow hair were already damaged by bleach and delipidation, however the worn-out bow hairs were much more damaged and broken off by force, which relates to wearing out.

  11. Parental Involvement in the Musical Education of Violin Students: Suzuki and "Traditional" Approaches Compared

    Science.gov (United States)

    Bugeja, Clare

    2009-01-01

    This article investigates parental involvement in the musical education of violin students and the changing role of the parents' across the learning process. Two contexts were compared, one emphasising the Suzuki methodology and the other a "traditional" approach. Students learning "traditionally" are typically taught note reading from the…

  12. Understanding the Learning Style of Pre-School Children Learning the Violin

    Science.gov (United States)

    Calissendorff, Maria

    2006-01-01

    The aim of the study was to acquire a deeper understanding of how small children learn an instrument in the presence of their parents. It is qualitative in nature and concerned six pre-school children (five years old) who were learning the violin together and where their parents were present at the lessons. All the children's homes were visited…

  13. Microanalysis of old violin varnishes by total-reflection X-ray fluorescence

    Science.gov (United States)

    von Bohlen, Alex; Meyer, Friedrich

    1997-07-01

    Total reflection X-ray fluorescence was used to characterize elements (with Z>13) contained in varnishes applied by prominent violin makers during the last five centuries. Direct analyses of small flakes with masses varnish. Higher amounts of Fe, As and Pb were found in old products, Mn, Co, Cu, Zn and Pb were used in more recent varnishes.

  14. Experimental Demonstration on Air Cavity Mode of Violin Using Holed Sheets of Paper

    Science.gov (United States)

    Matsutani, Akihiro

    2018-01-01

    The fundamental air cavity mode (A0) of a violin was investigated from the viewpoint of its dependence on the opening area and shape by using holed sheets of paper. The dependences of the frequency response of the A0 cavity mode on the shape, opening area, and orientation of the openings were observed. It was also demonstrated that the change of…

  15. Effects of Articulation Styles on Perception of Modulated Tempos in Violin Excerpts

    Science.gov (United States)

    Geringer, John M.; Madsen, Clifford K.; Macleod, Rebecca B.

    2007-01-01

    We investigated effects of legato, staccato and pizzicato articulation styles on the perception of modulated tempos. Seventy-two music majors served as participants. Two solo violin excerpts were chosen with contrasting rhythmic rates and were recorded in all three articulation styles. Examples were presented to listeners in three conditions of…

  16. First results from the 'Violin-Mode' tests on an advanced LIGO suspension at MIT

    International Nuclear Information System (INIS)

    Lockerbie, N A; Tokmakov, K V; Carbone, L; Shapiro, B; Bell, A; Strain, K A

    2011-01-01

    This paper describes the first results from 'Violin-Mode' measurements made on the four suspension fibres of a fully suspended 40 kg test mass. These measurements were made at the LIGO lab, Gravitational Wave Observatory test facility, at MIT. Here, an aluminium-alloy (dummy) test mass, simulating an advanced LIGO (Laser Interferometer Gravitational Wave Observatory) test mass/mirror, had been suspended in air from a test suspension by four fused-silica suspension fibres, each measuring 400 μm in diameter x 600 mm long. Violin-Mode measurements were made on these highly tensioned fibres by retrofitting a prototype system of four novel shadow sensors to the test suspension, one per fibre, these sensors having, collectively, a displacement sensitivity of (6.9 ± 1.3) x 10 -11 m (rms) Hz -1/2 , at 500 Hz, over a measuring span of ±0.1 mm. Violin-Mode fundamental resonances were detected in all four fibres: with frequencies ∼ 485 Hz when the test mass was supported lightly from below, and at ∼500 Hz when it was fully suspended. In the latter case the Violin-Mode detection took place whilst the test mass, together with its suspension fibres, was undergoing relatively large-amplitude 'pendulum-mode' motion, at ∼0.6 Hz. This motion was measured to have a peak-peak amplitude at one of the suspension fibres of up to ∼140 μm (35 μm, rms) the shadow sensors each having subsidiary outputs for monitoring such low-frequency, large amplitude, motion. Under fully suspended conditions, a calibrated Violin-Mode 'free-oscillation' amplitude of 430 ± 20 picometres, rms, was measured at 500.875 Hz, in the same suspension fibre which was found to be undergoing, simultaneously, the ∼140 μm peak-peak motion. Over the bandwidth monitored (dc to 3.2 kHz), Violin-Mode harmonics up to the sixth were recorded in an evoked response. It was concluded that the prototype system had demonstrated amply its practical viability as a detector of Violin-Mode resonances in the test

  17. First results from the ‘Violin-Mode’ tests on an advanced LIGO suspension at MIT

    Science.gov (United States)

    Lockerbie, N. A.; Carbone, L.; Shapiro, B.; Tokmakov, K. V.; Bell, A.; Strain, K. A.

    2011-12-01

    This paper describes the first results from ‘Violin-Mode’ measurements made on the four suspension fibres of a fully suspended 40 kg test mass. These measurements were made at the LIGO lab, Gravitational Wave Observatory test facility, at MIT. Here, an aluminium-alloy (dummy) test mass, simulating an advanced LIGO (Laser Interferometer Gravitational Wave Observatory) test mass/mirror, had been suspended in air from a test suspension by four fused-silica suspension fibres, each measuring 400 µm in diameter × 600 mm long. Violin-Mode measurements were made on these highly tensioned fibres by retrofitting a prototype system of four novel shadow sensors to the test suspension, one per fibre, these sensors having, collectively, a displacement sensitivity of (6.9 ± 1.3) × 10-11 m (rms) Hz-1/2, at 500 Hz, over a measuring span of ±0.1 mm. Violin-Mode fundamental resonances were detected in all four fibres: with frequencies ˜ 485 Hz when the test mass was supported lightly from below, and at ˜500 Hz when it was fully suspended. In the latter case the Violin-Mode detection took place whilst the test mass, together with its suspension fibres, was undergoing relatively large-amplitude ‘pendulum-mode’ motion, at ˜0.6 Hz. This motion was measured to have a peak-peak amplitude at one of the suspension fibres of up to ˜140 µm (35 µm, rms)—the shadow sensors each having subsidiary outputs for monitoring such low-frequency, large amplitude, motion. Under fully suspended conditions, a calibrated Violin-Mode ‘free-oscillation’ amplitude of 430 ± 20 picometres, rms, was measured at 500.875 Hz, in the same suspension fibre which was found to be undergoing, simultaneously, the ˜140 µm peak-peak motion. Over the bandwidth monitored (dc to 3.2 kHz), Violin-Mode harmonics up to the sixth were recorded in an evoked response. It was concluded that the prototype system had demonstrated amply its practical viability as a detector of Violin-Mode resonances in the

  18. Elimination of ketone vapors by adsorption on spherical MCM-41 and MCM-48 silicas decorated with thermally activated poly(furfuryl alcohol)

    International Nuclear Information System (INIS)

    Machowski, Kamil; Kuśtrowski, Piotr; Dudek, Barbara; Michalik, Marek

    2015-01-01

    Spherical MCM-41 and MCM-48 silicas with different arrangements of mesopores were synthesized in a water–alcohol solution of surfactant by the hard-templating method. The pore structure and morphology of the obtained materials were confirmed by powder X-ray diffraction (XRD), low-temperature adsorption of nitrogen and scanning electron microscopy (SEM). The surface of mesoporous silicas was decorated with small amounts of poly(furfuryl alcohol) (PFA), which was introduced by the precipitation polymerization and subsequently thermally activated at 523 K to form stable C=O surface species detected by FTIR spectroscopy. The adsorption capacity of the PFA/silica composites in the elimination of various ketone (acetone, methyl-ethyl ketone and methyl-isobutyl ketone) vapors was compared to the effectiveness of pristine silicas. It was found that the modification of silicas by thermally degraded PFA enhanced their adsorption capacity. This effect was attributed to the appearance of another type of surface centers (namely carbonyl groups), which beside silanols interact with ketone molecules via hydrogen bonds. DRIFT spectra showed that a ketone molecule is bonded on silanol species in its keto form, whereas on carbonyl functionalities in enol one. - Highlights: • Surface of spherical MCM-type silicas was decorated with poly(furfuryl alcohol). • Thermal degradation of deposited polymer resulted in formation of C=O species. • Carbonyl groups enhanced adsorption capacity of MCM-41 and MCM-48 silicas. • Adsorption of ketones in enol or keto forms was revealed by DRIFT measurements.

  19. Elimination of ketone vapors by adsorption on spherical MCM-41 and MCM-48 silicas decorated with thermally activated poly(furfuryl alcohol)

    Energy Technology Data Exchange (ETDEWEB)

    Machowski, Kamil [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków (Poland); Kuśtrowski, Piotr, E-mail: kustrows@chemia.uj.edu.pl [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków (Poland); Dudek, Barbara [Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków (Poland); Michalik, Marek [Institute of Geological Sciences, Jagiellonian University, Oleandry 2a, 30-063 Kraków (Poland)

    2015-09-01

    Spherical MCM-41 and MCM-48 silicas with different arrangements of mesopores were synthesized in a water–alcohol solution of surfactant by the hard-templating method. The pore structure and morphology of the obtained materials were confirmed by powder X-ray diffraction (XRD), low-temperature adsorption of nitrogen and scanning electron microscopy (SEM). The surface of mesoporous silicas was decorated with small amounts of poly(furfuryl alcohol) (PFA), which was introduced by the precipitation polymerization and subsequently thermally activated at 523 K to form stable C=O surface species detected by FTIR spectroscopy. The adsorption capacity of the PFA/silica composites in the elimination of various ketone (acetone, methyl-ethyl ketone and methyl-isobutyl ketone) vapors was compared to the effectiveness of pristine silicas. It was found that the modification of silicas by thermally degraded PFA enhanced their adsorption capacity. This effect was attributed to the appearance of another type of surface centers (namely carbonyl groups), which beside silanols interact with ketone molecules via hydrogen bonds. DRIFT spectra showed that a ketone molecule is bonded on silanol species in its keto form, whereas on carbonyl functionalities in enol one. - Highlights: • Surface of spherical MCM-type silicas was decorated with poly(furfuryl alcohol). • Thermal degradation of deposited polymer resulted in formation of C=O species. • Carbonyl groups enhanced adsorption capacity of MCM-41 and MCM-48 silicas. • Adsorption of ketones in enol or keto forms was revealed by DRIFT measurements.

  20. Thermal hydraulic characteristics of the pool-type FBR 'ARES' eliminating intermediate heat-transfer system. 2. Transient characteristics in representative events

    International Nuclear Information System (INIS)

    Nishi, Yoshihisa; Ueda, Nobuyuki; Kinoshita, Izumi; Yoshida, Kazuo

    1999-01-01

    An innovative plant concept (ARES), which eliminates intermediate heat-transfer system, was proposed in order to reduce the construction cost of the liquid metal cooled fast breeder reactor (LMFBR). In the present study, representative events of the ARES were picked up and plant transient analysis was conducted in order to reveal the thermal hydraulic characteristics of the ARES. The main results of the analysis are as follows: (1) The core was sufficiently cooled without sodium boiling in an event of mis-operation of the siphon break system. (2) The disturbances of the SG transfer to the core within about 30 seconds in a event of the feed water increasing. This transition period is less than half that of the conventional LMFBR. However, the transient characteristics of the ARES are very similar to those of the conventional LMFBR. Based on these results, it is only necessary to consider the short transition period in order to design the control system. (3) Based on the results of the calculation of a total blackout accident, it is concluded that the use of the SG-side cooling together is profitable in order to satisfy the design safety criteria in design basis events. In the case of full natural-circulation cooling, the use of the SG-side cooling together is profitable in order to satisfy the design safety criteria. (author)

  1. Optimization of non-thermal plasma efficiency in the simultaneous elimination of benzene, toluene, ethyl-benzene, and xylene from polluted airstreams using response surface methodology.

    Science.gov (United States)

    Najafpoor, Ali Asghar; Jonidi Jafari, Ahmad; Hosseinzadeh, Ahmad; Khani Jazani, Reza; Bargozin, Hasan

    2018-01-01

    Treatment with a non-thermal plasma (NTP) is a new and effective technology applied recently for conversion of gases for air pollution control. This research was initiated to optimize the efficient application of the NTP process in benzene, toluene, ethyl-benzene, and xylene (BTEX) removal. The effects of four variables including temperature, initial BTEX concentration, voltage, and flow rate on the BTEX elimination efficiency were investigated using response surface methodology (RSM). The constructed model was evaluated by analysis of variance (ANOVA). The model goodness-of-fit and statistical significance was assessed using determination coefficients (R 2 and R 2 adj ) and the F-test. The results revealed that the R 2 proportion was greater than 0.96 for BTEX removal efficiency. The statistical analysis demonstrated that the BTEX removal efficiency was significantly correlated with the temperature, BTEX concentration, voltage, and flow rate. Voltage was the most influential variable affecting the dependent variable as it exerted a significant effect (p < 0.0001) on the response variable. According to the achieved results, NTP can be applied as a progressive, cost-effective, and practical process for treatment of airstreams polluted with BTEX in conditions of low residence time and high concentrations of pollutants.

  2. Reverse engineering the structural and acoustic behavior of a stradivari violin

    Science.gov (United States)

    Pyrkosz, Michael

    There is a tremendous amount of mystery that surrounds the instruments of Antonio Stradivari. There have been many studies done in the past, but no one completely understands exactly how he made his instruments, or why they are still considered the best in the world. This project is designed to develop an engineering model of one of Stradivari's violins that will accurately simulate the structural and acoustic behavior of the instrument. It also hopes to shine some light on what makes the instruments of Stradivari unique when compared to other violins. It will focus on geometry and material properties, utilizing several modern engineering tools, including CT scanning, experimental modal analysis, finite element analysis, correlation techniques, and acoustic synthesis.

  3. Awake Surgery for a Violin Player: Monitoring Motor and Music Performance, A Case Report.

    Science.gov (United States)

    Piai, Vitória; Vos, Sandra H; Idelberger, Reinhard; Gans, Pauline; Doorduin, Jonne; Ter Laan, Mark

    2018-02-27

    We report the case of a professional violin player who underwent an awake craniotomy to resect a tumor in the left supplementary motor area, an area involved in motor planning. A careful pre- and intraoperative monitoring plan for music performance and complex motor function was established that could be used in combination with cortical stimulation. The patient suffered an epileptic seizure during cortical stimulation. The monitoring of complex motor and musical functions was implemented with the patient playing the violin while the resection was performed. Almost complete resection was achieved with no notable postoperative deficits contributing to functional impairment. The multidisciplinary approach, involving neurosurgery, neuropsychology, anesthesiology, and clinical neurophysiology, allowed us to successfully cope with the theoretical and practical challenges associated with tailored care for a professional musician. The music and motor monitoring plan is reported in detail to enable other sites to reproduce and adapt it accordingly.

  4. Special Issue: Every picture tells a story: Pupil representations of learning the violin

    Directory of Open Access Journals (Sweden)

    Andrea Creech

    2006-06-01

    Full Text Available Abstract: The influence on learning outcomes of interpersonal interaction amongst teachers, pupils and parents is the subject of an inquiry that took this researcher on a voyage from the qualitative to the quantitative side of the “methodological divide”, and back again. This paper presents findings from first phase of the research, which included a quantitative survey to examine how learning and teaching experience for violin pupils was influenced by the interpersonal dynamics of responsiveness and control, within pupilparent and pupil-teacher relationships. As part of the survey pupils were asked to draw pictures of their violin lessons. It was thought that the pictures might reveal pupils’ perceptions of their experience of learning an instrument and that the pictures would add depth to the quantitative scales that measured interpersonal mechanisms and pupil outcomes. The pictures were subjected to content analysis and coded accordingly. These codes were matched with pupil artists’ scores for control and responsiveness, as well as with their scores for outcomes that included enjoyment of music, personal satisfaction, self esteem, self efficacy, friendship, motivation and musical attainment. Analysis of variance was computed in order to test the null hypotheses that a pupil-teacher-parent interpersonal behaviour (control and responsiveness was not represented in their pictures and b pupil outcomes were not reflected in their depictions of violin lessons. This paper presents the results of this analysis, thus addressing the question of whether the pictures could be accepted as telling a credible and coherent story about pupils’ perceptions of learning the violin.

  5. Resonance wood [Picea abies (L.) Karst.]--evaluation and prediction of violin makers' quality-grading.

    Science.gov (United States)

    Buksnowitz, Christoph; Teischinger, Alfred; Müller, Ulrich; Pahler, Andreas; Evans, Robert

    2007-04-01

    The definition of quality in the field of resonance wood for musical instrument making has attracted considerable interest over decades but has remained incomplete. The current work compares the traditional knowledge and practical experience of violin makers with a material-science approach to objectively characterize the properties of resonance wood. Norway spruce [Picea abies (L.) Karst.] has earned a very high reputation for the construction of resonance tops of stringed instruments and resonance boards of keyboard instruments, and was therefore chosen as the focus of the investigation. The samples were obtained from numerous renowned resonance wood regions in the European Alps and cover the whole range of available qualities. A set of acoustical, anatomical, mechanical and optical material properties was measured on each sample. These measurements were compared with subjective quality grading by violin makers, who estimated the acoustical, optical and overall suitability for violin making. Multiple linear regression models were applied to evaluate the predictability of the subjective grading using the measured material characteristics as predictors. The results show that luthiers are able to estimate wood quality related to visible features, but predictions of mechanical and acoustical properties proved to be very poor.

  6. Damping and tuning of the fibre violin modes in monolithic silica suspensions

    International Nuclear Information System (INIS)

    Gossler, S; Cagnoli, G; Crooks, D R M; Lueck, H; Rowan, S; Smith, J R; Strain, K A; Hough, J; Danzmann, K

    2004-01-01

    High Q mirror suspensions are a key element of the advanced interferometric gravitational-wave detectors. In December 2002 the last of the final interferometer optics of GEO 600 were monolithically suspended, using fused silica fibres. The violin modes of the suspension fibres can have Q greater than 10 8 and can therefore interfere with the interferometer length control servo. Hence, the violin modes need to be damped, without degrading the pendulum Q itself. Furthermore, the frequency spread of the fibres used has to be small to allow for high Q notch filtering in the length control servo. The requirements for the violin modes of the two GEO 600 inboard suspensions are Q 6 for the fundamental and Q 6 for the first harmonic mode, respectively. The frequency spread should not exceed 10% within one mode. To accomplish that, two sections of the fibres were coated with amorphous Teflon. By applying the coating, the Q of the relevant modes can be degraded to the desired values and furthermore, the frequencies of these modes can be tuned almost independently with a good accuracy over a wide range. After welding the fibres in the monolithic suspension, a corrective coating was applied to some fibres, to compensate for the frequency spread due to the tension spread of the four fibres within a suspension. We present the method and the results achieved

  7. Learning to play the violin: motor control by freezing, not freeing degrees of freedom.

    Science.gov (United States)

    Konczak, Jürgen; Vander Velden, Heidi; Jaeger, Lukas

    2009-05-01

    Playing a violin requires precise patterns of limb coordination that are acquired over years of practice. In the present study, the authors investigated how motion at proximal arm joints influenced the precision of bow movements in novice learners and experts. The authors evaluated the performances of 11 children (4-12 years old), 3 beginning-to-advanced level adult players, and 2 adult concert violinists, using a musical work that all had mastered as their first violin piece. The authors found that learning to play the violin was not associated with a release or freeing of joint degrees of freedom. Instead, learning was characterized by an experience-dependent suppression of sagittal shoulder motion, as documented by an observed reduction in joint angular amplitude. This reduction in the amplitude of shoulder flexion-extension correlated highly with a decrease of bow-movement variability. The remaining mechanical degrees of freedom at the elbow and shoulder showed patterns of neither suppression nor freeing. Only violinists with more than 700 practice hr achieved sagittal shoulder range of motion comparable to experts. The findings imply that restricting joint amplitude at selected joint degrees of freedom, while leaving other degrees of freedom unconstrained, constitutes an appropriate strategy for learning complex, high-precision motor patterns in children and adults. The findings also highlight that mastering even seemingly simple bowing movements constitutes a prolonged learning process.

  8. Damping and tuning of the fibre violin modes in monolithic silica suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Gossler, S [Max-Planck-Institute for Gravitational Physics (Albert-Einstein-Institute) and University of Hannover, Callinstr 38, D-30167 Hannover (Germany); Cagnoli, G [Department of Physics and Astronomy, Institute for Gravitational Research, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Crooks, D R M [Department of Physics and Astronomy, Institute for Gravitational Research, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Lueck, H [Max-Planck-Institute for Gravitational Physics (Albert-Einstein-Institute) and University of Hannover, Callinstr 38, D-30167 Hannover (Germany); Rowan, S [Department of Physics and Astronomy, Institute for Gravitational Research, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Smith, J R [Max-Planck-Institute for Gravitational Physics (Albert-Einstein-Institute) and University of Hannover, Callinstr 38, D-30167 Hannover (Germany); Strain, K A [Department of Physics and Astronomy, Institute for Gravitational Research, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Hough, J [Department of Physics and Astronomy, Institute for Gravitational Research, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Danzmann, K [Max-Planck-Institute for Gravitational Physics (Albert-Einstein-Institute) and University of Hannover, Callinstr 38, D-30167 Hannover (Germany)

    2004-03-07

    High Q mirror suspensions are a key element of the advanced interferometric gravitational-wave detectors. In December 2002 the last of the final interferometer optics of GEO 600 were monolithically suspended, using fused silica fibres. The violin modes of the suspension fibres can have Q greater than 10{sup 8} and can therefore interfere with the interferometer length control servo. Hence, the violin modes need to be damped, without degrading the pendulum Q itself. Furthermore, the frequency spread of the fibres used has to be small to allow for high Q notch filtering in the length control servo. The requirements for the violin modes of the two GEO 600 inboard suspensions are Q < 3 x 10{sup 6} for the fundamental and Q < 2 x 10{sup 6} for the first harmonic mode, respectively. The frequency spread should not exceed 10% within one mode. To accomplish that, two sections of the fibres were coated with amorphous Teflon. By applying the coating, the Q of the relevant modes can be degraded to the desired values and furthermore, the frequencies of these modes can be tuned almost independently with a good accuracy over a wide range. After welding the fibres in the monolithic suspension, a corrective coating was applied to some fibres, to compensate for the frequency spread due to the tension spread of the four fibres within a suspension. We present the method and the results achieved.

  9. Studying friction while playing the violin: exploring the stick-slip phenomenon.

    Science.gov (United States)

    Casado, Santiago

    2017-01-01

    Controlling the stick-slip friction phenomenon is of major importance for many familiar situations. This effect originates from the periodic rupture of junctions created between two rubbing surfaces due to the increasing shear stress at the interface. It is ultimately responsible for the behavior of many braking systems, earthquakes, and unpleasant squeaky sounds caused by the scratching of two surfaces. In the case of a musical bow-stringed instrument, stick-slip is controlled in order to provide well-tuned notes at different intensities. A trained ear is able to distinguish slight sound variations caused by small friction differences. Hence, a violin can be regarded as a perfect benchmark to explore the stick-slip effect at the mesoscale. Two violin bow hairs were studied, a natural horse tail used in a professional philharmonic orchestra, and a synthetic one used with a violin for beginners. Atomic force microscopy characterization revealed clear differences when comparing the surfaces of both bow hairs, suggesting that a structure having peaks and a roughness similar to that of the string to which both bow hairs rubbed permits a better control of the stick-slip phenomenon.

  10. Studying friction while playing the violin: exploring the stick–slip phenomenon

    Directory of Open Access Journals (Sweden)

    Santiago Casado

    2017-01-01

    Full Text Available Controlling the stick–slip friction phenomenon is of major importance for many familiar situations. This effect originates from the periodic rupture of junctions created between two rubbing surfaces due to the increasing shear stress at the interface. It is ultimately responsible for the behavior of many braking systems, earthquakes, and unpleasant squeaky sounds caused by the scratching of two surfaces. In the case of a musical bow-stringed instrument, stick–slip is controlled in order to provide well-tuned notes at different intensities. A trained ear is able to distinguish slight sound variations caused by small friction differences. Hence, a violin can be regarded as a perfect benchmark to explore the stick–slip effect at the mesoscale. Two violin bow hairs were studied, a natural horse tail used in a professional philharmonic orchestra, and a synthetic one used with a violin for beginners. Atomic force microscopy characterization revealed clear differences when comparing the surfaces of both bow hairs, suggesting that a structure having peaks and a roughness similar to that of the string to which both bow hairs rubbed permits a better control of the stick–slip phenomenon.

  11. Comparison of electromyographic activity and range of neck motion in violin students with and without neck pain during playing.

    Science.gov (United States)

    Park, Kyue-nam; Kwon, Oh-yun; Ha, Sung-min; Kim, Su-jung; Choi, Hyun-jung; Weon, Jong-hyuck

    2012-12-01

    Neck pain is common in violin students during a musical performance. The purpose of this study was to compare electromyographic (EMG) activity in superficial neck muscles with neck motion when playing the violin as well as neck range of motion (ROM) at rest, between violin students with and without neck pain. Nine violin students with neck pain and nine age- and gender-matched subjects without neck pain were recruited. Muscle activity of the bilateral upper trapezius, sternocleidomastoid, and superficial cervical extensor muscles was measured using surface EMG. Kinematic data on neck motion while playing and active neck ROM were also measured using a three-dimensional motion analysis system. Independent t-tests were used to compare EMG activity with kinematic data between groups. These analyses revealed that while playing, both the angle of left lateral bending and leftward rotation of the cervical spine were significantly greater in the neck pain group than among those without neck pain. Similarly, EMG activity of the left upper trapezius, both cervical extensors, and both sternocleidomastoid muscles were significantly greater in the neck pain group. The active ROM of left axial rotation was significantly lower in the neck pain group. These results suggest that an asymmetric playing posture and the associated increased muscle activity as well as decreased neck axial rotation may contribute to neck pain in violin students.

  12. In situ multi-element analyses by energy-dispersive X-ray fluorescence on varnishes of historical violins

    Energy Technology Data Exchange (ETDEWEB)

    Echard, Jean-Philippe [Laboratoire de recherche et de restauration, Musee de la musique, Cite de la musique, 221, avenue Jean-Jaures, 75019 Paris (France)]. E-mail: jpechard@cite-musique.fr

    2004-10-08

    Varnishes of Italian violins and other historical stringed instruments have been analyzed by energy-dispersive X-ray fluorescence (EDXRF). The instruments whose varnishes were to be analyzed were chosen from the collection kept in Musee de la Musique in Paris. Direct analyses were performed on instrument varnishes, without any sampling and non-destructively, showing inorganic elements such as lead, mercury and iron that could be related to siccatives or pigments. Analytical results and their comparison with old formulae or traditional recipes of violin varnishes, as with the few previous analytical results, will be discussed.

  13. In situ multi-element analyses by energy-dispersive X-ray fluorescence on varnishes of historical violins

    Science.gov (United States)

    Echard, Jean-Philippe

    2004-10-01

    Varnishes of Italian violins and other historical stringed instruments have been analyzed by energy-dispersive X-ray fluorescence (EDXRF). The instruments whose varnishes were to be analyzed were chosen from the collection kept in Musée de la Musique in Paris. Direct analyses were performed on instrument varnishes, without any sampling and non-destructively, showing inorganic elements such as lead, mercury and iron that could be related to siccatives or pigments. Analytical results and their comparison with old formulae or traditional recipes of violin varnishes, as with the few previous analytical results, will be discussed.

  14. In situ multi-element analyses by energy-dispersive X-ray fluorescence on varnishes of historical violins

    International Nuclear Information System (INIS)

    Echard, Jean-Philippe

    2004-01-01

    Varnishes of Italian violins and other historical stringed instruments have been analyzed by energy-dispersive X-ray fluorescence (EDXRF). The instruments whose varnishes were to be analyzed were chosen from the collection kept in Musee de la Musique in Paris. Direct analyses were performed on instrument varnishes, without any sampling and non-destructively, showing inorganic elements such as lead, mercury and iron that could be related to siccatives or pigments. Analytical results and their comparison with old formulae or traditional recipes of violin varnishes, as with the few previous analytical results, will be discussed

  15. [Deep venous thrombosis of the upper limb in a violin player: The "bow syndrome"].

    Science.gov (United States)

    Sanson, H; Gautier, V; Stansal, A; Sfeir, D; Franceschi, C; Priollet, P

    2016-12-01

    Exercise-induced thrombosis is a rare cause of deep venous thrombosis (DVT) of the upper limb and usually affects young subjects without comorbid conditions. The diagnosis may be challenging. A 23-year-old female right-handed French teacher and amateur violin player presented with edema of the root of the right arm associated with erythrocyanosis of the extremity and collateral circulation of the shoulder. History taking revealed oral contraception and recent change in violin playing habits. D-dimers were negative. A second duplex-Doppler was required before visualization of a DVT in the right subclavian vein. The patient was given low-molecular-weight heparin alone, followed by rivaroxaban. The outcome was very favorable at 48h. The patient was seen at 4 months and had not had a recurrent episode. The diagnosis of DVT of the upper limb is basically clinical. There is a clinical probability score for the introduction of anticoagulation even if the duplex-Doppler fails to visualize DVT, a situation that can occur due to the clavicular superposition in this region. Exercise-induced DVT should be suspected in patients with minimally intense but repeated exercise (hyper-abduction), e.g. as here playing the violin. Anticoagulation is the treatment of choice. The role for surgery and pharmacomechanical strategies remains to be defined. Exercise-induced thrombosis (Paget-Schroetter syndrome) should be suspected in young patients free of any comorbidity who develop a thrombosis of the upper limb. Studies comparing different therapeutic options would be useful to achieve more homogeneous management practices despite the heterogeneous clinical presentations. Copyright © 2016. Published by Elsevier Masson SAS.

  16. Strings on a Violin: Location Dependence of Frequency Tuning in Active Dendrites.

    Science.gov (United States)

    Das, Anindita; Rathour, Rahul K; Narayanan, Rishikesh

    2017-01-01

    Strings on a violin are tuned to generate distinct sound frequencies in a manner that is firmly dependent on finger location along the fingerboard. Sound frequencies emerging from different violins could be very different based on their architecture, the nature of strings and their tuning. Analogously, active neuronal dendrites, dendrites endowed with active channel conductances, are tuned to distinct input frequencies in a manner that is dependent on the dendritic location of the synaptic inputs. Further, disparate channel expression profiles and differences in morphological characteristics could result in dendrites on different neurons of the same subtype tuned to distinct frequency ranges. Alternately, similar location-dependence along dendritic structures could be achieved through disparate combinations of channel profiles and morphological characteristics, leading to degeneracy in active dendritic spectral tuning. Akin to strings on a violin being tuned to different frequencies than those on a viola or a cello, different neuronal subtypes exhibit distinct channel profiles and disparate morphological characteristics endowing each neuronal subtype with unique location-dependent frequency selectivity. Finally, similar to the tunability of musical instruments to elicit distinct location-dependent sounds, neuronal frequency selectivity and its location-dependence are tunable through activity-dependent plasticity of ion channels and morphology. In this morceau, we explore the origins of neuronal frequency selectivity, and survey the literature on the mechanisms behind the emergence of location-dependence in distinct forms of frequency tuning. As a coda to this composition, we present some future directions for this exciting convergence of biophysical mechanisms that endow a neuron with frequency multiplexing capabilities.

  17. Gas chromatography/mass spectrometry characterization of historical varnishes of ancient Italian lutes and violin.

    Science.gov (United States)

    Echard, J P; Benoit, C; Peris-Vicente, J; Malecki, V; Gimeno-Adelantado, J V; Vaiedelich, S

    2007-02-12

    The organic constituents of historical vanishes from two ancient Italian lutes and a Stradivari violin, kept in the Musée de la musique in Paris, have been characterized using gas chromatography-mass spectrometry. Results have been compared with the chromatograms and mass spectra of recent as well as old naturally aged reference materials. The three historical varnishes analyzed have been shown to be oil varnishes, probably mixtures of linseed oil with resins. Identification of diterpenoids and triterpenoids compounds, and of the resins that may have been ingredients of the varnishes, are discussed in this paper.

  18. Estimation of violin bowing features from Audio recordings with Convolutional Networks

    DEFF Research Database (Denmark)

    Perez-Carillo, Alfonso; Purwins, Hendrik

    The acquisition of musical gestures and particularly of instrument controls from a musical performance is a field of increasing interest with applications in many research areas. In the last years, the development of novel sensing technologies has allowed the fine measurement of such controls...... and low-cost of the acquisition and its nonintrusive nature. The main challenge is designing robust detection algorithms to be as accurate as the direct approaches. In this paper, we present an indirect acquisition method to estimate violin bowing controls from audio signal analysis based on training...

  19. THE SONATA FOR VIOLIN AND PIANO BY VIOREL MUNTEANU IN THE INTERPRETATIVE CONCEPTION OF NATIVE MUSICIANS

    Directory of Open Access Journals (Sweden)

    STOLEARCIUC XENIA

    2016-06-01

    Full Text Available Signed in 1974, the Sonata for violin and piano by Viorel Munteanu continues the Enescu tradition and distinguishes itself by an original musical language, that alongside of the form sobriety, places this opus among the most representative examples of Romanian chamber instrumental music of the second half of the 20th century. Special attention is given to the exploration of the source of folklore and the Byzantine influence that generate the intonational-thematic structure of the whole work and relate it to the opuses of Moldovan music. Thus, the abundance of sound symbols and specific elements of the „pastoral” space reveals essential aspects of the interpretative conception of the native musicians. This composition was premiered in Chisinau within the framework of the 25th edition of the International Festival The Days of New Music. In the present article the author wants to pay her respects to the late violinist Angela Molodojan who performed with remarkable artistry, originality and musical refinement the violin part in the above-mentioned creation.

  20. Attention and Perseverance Behaviors of PreSchool Children Enrolled in Suzuki Violin Lessons and Other Activities.

    Science.gov (United States)

    Scott, Laurie

    1992-01-01

    Reports on a study of attention span and persevering behaviors of preschool children. Finds the Suzuki Method of violin instruction is associated with longer attention spans and more persevering behaviors than creative movement instruction or other preschool programs. Concludes that teachers prefer the Suzuki Method's approach to other forms of…

  1. Full-field vibration measurements of the violin using digital stroboscopic holographic interferometry and electromagnetic stimulation of the strings

    Science.gov (United States)

    Keersmaekers, Lissa; Keustermans, William; De Greef, Daniël; Dirckx, Joris J. J.

    2016-06-01

    We developed a setup in which the strings of the violin are driven electromagnetically, and the resulting vibration of the instrument is measured with digital stroboscopic holography. A 250mW single mode green laser beam is chopped using an acousto-optic modulator, generating illumination pulses of 2% of the vibration period. The phase of the illumination pulse is controlled by a programmable function generator so that digital holograms can be recorded on a number of subsequent time positions within the vibration phase. From these recordings, the out of plane motion as a function of time is reconstructed in full field. We show results of full-field vibration amplitude and vibration phase maps, and time resolved full-field deformations of the violin back plane. Time resolved measurements show in detail how the deformation of the violin plane changes as a function of time at different frequencies. We found very different behavior under acoustic stimulation of the instrument and when using electromagnetic stimulation of a string. The aim of the work it to gather data which can be used in power flow calculations to study how the energy of the strings is conducted to the body of the violin and eventually is radiated as sound.

  2. Full-field vibration measurements of the violin using digital stroboscopic holographic interferometry and electromagnetic stimulation of the strings

    International Nuclear Information System (INIS)

    Keersmaekers, Lissa; Keustermans, William; De Greef, Daniël; Dirckx, Joris J. J.

    2016-01-01

    We developed a setup in which the strings of the violin are driven electromagnetically, and the resulting vibration of the instrument is measured with digital stroboscopic holography. A 250 mW single mode green laser beam is chopped using an acousto-optic modulator, generating illumination pulses of 2% of the vibration period. The phase of the illumination pulse is controlled by a programmable function generator so that digital holograms can be recorded on a number of subsequent time positions within the vibration phase. From these recordings, the out of plane motion as a function of time is reconstructed in full field. We show results of full-field vibration amplitude and vibration phase maps, and time resolved full-field deformations of the violin back plane. Time resolved measurements show in detail how the deformation of the violin plane changes as a function of time at different frequencies. We found very different behavior under acoustic stimulation of the instrument and when using electromagnetic stimulation of a string. The aim of the work it to gather data which can be used in power flow calculations to study how the energy of the strings is conducted to the body of the violin and eventually is radiated as sound.

  3. Fiddler's neck: Chin rest-associated irritant contact dermatitis and allergic contact dermatitis in a violin player.

    Science.gov (United States)

    Caero, Jennifer E; Cohen, Philip R

    2012-09-15

    Fiddler's neck refers to an irritant contact dermatitis on the submandibular neck of violin and viola players and an allergic contact dermatitis to nickel from the bracket attaching the violin to the chin rest on the violinist's supraclavicular neck. A 26-year-old woman developed submandibular and supraclavicular left neck lesions corresponding to the locations of the chin rest and bracket that was attached to her violin that held it against her neck when she played. Substitution of a composite chin rest, which did not contain nickel, and the short-term application of a low potency topical corticosteroid cream, resulted in complete resolution of the allergic contact dermatitis supraclavicular neck lesion. The irritant contact dermatitis submandibular neck lesion persisted. In conclusion, violin players are predisposed to developing irritant contact dermatitis or allergic contact dermatitis from the chin rest. We respectfully suggest that the submandibular neck lesions from contact with the chin rest be referred to as 'fiddler's neck - type 1,' whereas the supraclavicular neck lesions resulting from contact of the bracket holding the chin rest in place be called 'fiddler's neck - type 2.' A composite chin rest should be considered in patients with a preceding history of allergic contact dermatitis to nickel.

  4. Influences of Dynamic Level and Pitch Register on the Vibrato Rates and Widths of Violin and Viola Players

    Science.gov (United States)

    MacLeod, Rebecca B.

    2008-01-01

    The purpose of this study was to investigate possible influences of pitch register and dynamic level on vibrato rates and widths of university and high school violin and viola players. Analysis showed that pitch register significantly affected the vibrato rates and widths of the performers. Musicians vibrated 0.32 Hz faster and approximately 26…

  5. Full-field vibration measurements of the violin using digital stroboscopic holographic interferometry and electromagnetic stimulation of the strings

    Energy Technology Data Exchange (ETDEWEB)

    Keersmaekers, Lissa; Keustermans, William, E-mail: william.keustermans@uantwerpen.be; De Greef, Daniël; Dirckx, Joris J. J. [University of Antwerp, Laboratory of Biophysics and Biomedical Physics, Groenenborgerlaan 171, 2020 Antwerp (Belgium)

    2016-06-28

    We developed a setup in which the strings of the violin are driven electromagnetically, and the resulting vibration of the instrument is measured with digital stroboscopic holography. A 250 mW single mode green laser beam is chopped using an acousto-optic modulator, generating illumination pulses of 2% of the vibration period. The phase of the illumination pulse is controlled by a programmable function generator so that digital holograms can be recorded on a number of subsequent time positions within the vibration phase. From these recordings, the out of plane motion as a function of time is reconstructed in full field. We show results of full-field vibration amplitude and vibration phase maps, and time resolved full-field deformations of the violin back plane. Time resolved measurements show in detail how the deformation of the violin plane changes as a function of time at different frequencies. We found very different behavior under acoustic stimulation of the instrument and when using electromagnetic stimulation of a string. The aim of the work it to gather data which can be used in power flow calculations to study how the energy of the strings is conducted to the body of the violin and eventually is radiated as sound.

  6. Elimination of the induced malfunctions and use of dynamic prognosis in a thermodynamic diagnosis system of the thermal cycling; Eliminacao das malfuncoes induzidas e utilizacao do prognostico dinamico em sistemas de diagnostico termodinamico de ciclos termicos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, J.A.M.; Venturini, O.J.; Lora, E.E.S. [Universidade Federal de Itajuba (NEST/IEM/UNIFEI), MG (Brazil). Inst. de Engenharia Mecanica. Nucleo de Excelencia em Geracao Termeletrica e Distribuida], Emails: juliomendes@unifei.edu.br, osvaldo@unifei.edu.br, electo@unifei.edu.br

    2009-07-01

    The search for more efficient thermal cycles has led a growing complexity of these cycles and therefore increased the inter-relationships between the thermodynamic components. This complexity is further enhanced with the over time, due to the occurrence of both natural as early degradation in a more or less degree, of all plant components. Several methodologies have been proposed for creating system for diagnostic / prognostic with the objective to detect these degradations (defects) and quantify the gain that can be obtained in the performance indicators of thermal cycles (usually specific fuel consumption and power net) by the elimination of anomalies. Two points have been emphasized as the most difficult in the development of such systems: the distinction between the performance variation of the components due only to the point of operation outside of these project components, caused by the presence of abnormality in another component (induced malfunction) and a decrease in the performance due to the presence of anomalies in the component itself (intrinsic malfunction). The second difficulty is the quantification of the effects induced by the elimination of each of the present anomalies. This work makes use of the method of reconciliation and using individual models of each component to predict unusual behavior of the same design point. The comparison of data from the system plant information, relating to the current state and data from the models, is used to detect anomalies. The methodology is explained in detail and an application of it in a Rankine cycle is used to well understand, especially in parts for the elimination of induced malfunctions, and related to the induced changes by the elimination of each one of the anomalies.

  7. The Violin Concerto in D Major RV Anh. 8 and several other issues concerning František Jiránek (1698–1778)

    Czech Academy of Sciences Publication Activity Database

    Kapsa, Václav

    2014-01-01

    Roč. 14, č. 1 (2014), s. 15-43 ISSN 1594-0012 Institutional support: RVO:68378076 Keywords : 18th century instrumental music * violin concerto * Antonio Vivaldi * attribution * authenticity Subject RIV: AL - Art, Architecture, Cultural Heritage

  8. Neural network model for thermal inactivation of Salmonella Typhimurium to elimination in ground chicken: Acquisition of data by whole sample enrichment, miniature most-probable-number method

    Science.gov (United States)

    Predictive models are valuable tools for assessing food safety. Existing thermal inactivation models for Salmonella and ground chicken do not provide predictions above 71 degrees C, which is below the recommended final cooked temperature of 73.9 degrees C. They also do not predict when all Salmone...

  9. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

    Science.gov (United States)

    Hullman, Jessica; Resnick, Paul; Adar, Eytan

    2015-01-01

    Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs), that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

  10. Spatially resolved element analysis of historical violin varnishes by use of muPIXE.

    Science.gov (United States)

    von Bohlen, Alex; Röhrs, Stefan; Salomon, Joseph

    2007-02-01

    External muPIXE has been used for characterisation of small samples of varnish from historical violins, and pieces of varnished wood from historical and modern stringed instruments. To obtain spatially resolved information about the distribution of elements across the varnish layers single-spot analysis, line-scans, and area-mapping were performed. Local resolution of approximately 20 mum was obtained from the 3 MeV, 1 nA proton micro-probe. Results from simultaneous multi-element determination of Na, Mg, Al, Si, P, S, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br, Rb, Sr, Ag, Cd, Sn, Ba, and Pb in historical varnishes are presented. Semi-quantitative evaluation of line-scans recorded on diverse historical varnishes is reported. The applied method is discussed in detail and the results obtained are critically reviewed and compared with those in the literature.

  11. The player and the bowed string: coordination of bowing parameters in violin and viola performance.

    Science.gov (United States)

    Schoonderwaldt, E

    2009-11-01

    An experiment was conducted with four violin and viola players, measuring their bowing performance using an optical motion capture system and sensors on the bow. The measurements allowed for a detailed analysis of the use and coordination of the main bowing parameters bow velocity, bow force, and bow-bridge distance. An analysis of bowing strategies in detache playing of notes of three durations (0.2, 2, and 4 s) at three dynamic levels (pp, mf, and f) on all four strings is presented, focusing on the "steady" part of the notes. The results revealed clear trends in the coordinated variations of the bowing parameters depending on the constraints of the task, reflecting a common behavior as well as individual strategies. Furthermore, there were clear indications that the players adapted the bowing parameters to the physical properties of the string and the instrument, respecting the limits of the playable control parameter space.

  12. Hypothetical Outcome Plots Outperform Error Bars and Violin Plots for Inferences about Reliability of Variable Ordering.

    Directory of Open Access Journals (Sweden)

    Jessica Hullman

    Full Text Available Many visual depictions of probability distributions, such as error bars, are difficult for users to accurately interpret. We present and study an alternative representation, Hypothetical Outcome Plots (HOPs, that animates a finite set of individual draws. In contrast to the statistical background required to interpret many static representations of distributions, HOPs require relatively little background knowledge to interpret. Instead, HOPs enables viewers to infer properties of the distribution using mental processes like counting and integration. We conducted an experiment comparing HOPs to error bars and violin plots. With HOPs, people made much more accurate judgments about plots of two and three quantities. Accuracy was similar with all three representations for most questions about distributions of a single quantity.

  13. Extraction of bowing parameters from violin performance combining motion capture and sensors.

    Science.gov (United States)

    Schoonderwaldt, E; Demoucron, M

    2009-11-01

    A method is described for measurement of a complete set of bowing parameters in violin performance. Optical motion capture was combined with sensors for accurate measurement of the main bowing parameters (bow position, bow velocity, bow acceleration, bow-bridge distance, and bow force) as well as secondary control parameters (skewness, inclination, and tilt of the bow). In addition, other performance features (moments of on/off in bow-string contact, string played, and bowing direction) were extracted. Detailed descriptions of the calculations of the bowing parameters, features, and calibrations are given. The described system is capable of measuring all bowing parameters without disturbing the player, allowing for detailed studies of musically relevant aspects of bow control and coordination of bowing parameters in bowed-string instrument performance.

  14. Fifty Violins.

    Science.gov (United States)

    Hurwitz, Sol

    1999-01-01

    Roberta Guaspari-Tzavoras teaches 125 young violinists in 2 East Harlem elementary schools. Students are chosen by lottery. The only prerequisite is a willingness to do the hard work of practicing and learning. Her success in coaching inner-city students to a performance in Carnegie hall is the subject of a documentary and a feature film. (MLF)

  15. Load-cell based characterization system for a “Violin-Mode” shadow-sensor in advanced LIGO suspensions

    International Nuclear Information System (INIS)

    Lockerbie, N. A.; Tokmakov, K. V.

    2016-01-01

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which 40 kg test-mass/mirrors are each suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation and a rectangular silicon photodiode detector, which, together, were to bracket the fibre under test. The aim was to detect transverse Violin-Mode resonances in the suspension fibres. Part of the testing procedure involved tensioning a silica fibre sample and translating it transversely through the illuminating NIR beam, so as to measure the DC responsivity of the detection system to fibre displacement. However, an equally important part of the procedure, reported here, was to keep the fibre under test stationary within the beam, whilst trying to detect low-level AC Violin-Mode resonances excited on the fibre, in order to confirm the primary function of the sensor. Therefore, a tensioning system, incorporating a load-cell readout, was built into the test fibre’s holder. The fibre then was excited by a signal generator, audio power amplifier, and distant loudspeaker, and clear resonances were detected. A theory for the expected fundamental resonant frequency as a function of fibre tension was developed and is reported here, and this theory was found to match closely with the detected resonant frequencies as they varied with tension. Consequently, the resonances seen were identified as being proper Violin-Mode fundamental resonances of the fibre, and the operation of the Violin-Mode detection system was validated.

  16. Load-cell based characterization system for a "Violin-Mode" shadow-sensor in advanced LIGO suspensions

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.

    2016-07-01

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which 40 kg test-mass/mirrors are each suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation and a rectangular silicon photodiode detector, which, together, were to bracket the fibre under test. The aim was to detect transverse Violin-Mode resonances in the suspension fibres. Part of the testing procedure involved tensioning a silica fibre sample and translating it transversely through the illuminating NIR beam, so as to measure the DC responsivity of the detection system to fibre displacement. However, an equally important part of the procedure, reported here, was to keep the fibre under test stationary within the beam, whilst trying to detect low-level AC Violin-Mode resonances excited on the fibre, in order to confirm the primary function of the sensor. Therefore, a tensioning system, incorporating a load-cell readout, was built into the test fibre's holder. The fibre then was excited by a signal generator, audio power amplifier, and distant loudspeaker, and clear resonances were detected. A theory for the expected fundamental resonant frequency as a function of fibre tension was developed and is reported here, and this theory was found to match closely with the detected resonant frequencies as they varied with tension. Consequently, the resonances seen were identified as being proper Violin-Mode fundamental resonances of the fibre, and the operation of the Violin-Mode detection system was validated.

  17. Load-cell based characterization system for a “Violin-Mode” shadow-sensor in advanced LIGO suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Lockerbie, N. A.; Tokmakov, K. V. [SUPA (Scottish Universities Physics Alliance) Department of Physics, University of Strathclyde, 107 Rottenrow, Glasgow G4 0NG (United Kingdom)

    2016-07-15

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which 40 kg test-mass/mirrors are each suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation and a rectangular silicon photodiode detector, which, together, were to bracket the fibre under test. The aim was to detect transverse Violin-Mode resonances in the suspension fibres. Part of the testing procedure involved tensioning a silica fibre sample and translating it transversely through the illuminating NIR beam, so as to measure the DC responsivity of the detection system to fibre displacement. However, an equally important part of the procedure, reported here, was to keep the fibre under test stationary within the beam, whilst trying to detect low-level AC Violin-Mode resonances excited on the fibre, in order to confirm the primary function of the sensor. Therefore, a tensioning system, incorporating a load-cell readout, was built into the test fibre’s holder. The fibre then was excited by a signal generator, audio power amplifier, and distant loudspeaker, and clear resonances were detected. A theory for the expected fundamental resonant frequency as a function of fibre tension was developed and is reported here, and this theory was found to match closely with the detected resonant frequencies as they varied with tension. Consequently, the resonances seen were identified as being proper Violin-Mode fundamental resonances of the fibre, and the operation of the Violin-Mode detection system was validated.

  18. Violin f-hole contribution to far-field radiation via patch near-field acoustical holography.

    Science.gov (United States)

    Bissinger, George; Williams, Earl G; Valdivia, Nicolas

    2007-06-01

    The violin radiates either from dual ports (f-holes) or via surface motion of the corpus (top+ribs+back), with no clear delineation between these sources. Combining "patch" near-field acoustical holography over just the f-hole region of a violin with far-field radiativity measurements over a sphere, it was possible to separate f-hole from surface motion contributions to the total radiation of the corpus below 2.6 kHz. A0, the Helmholtz-like lowest cavity resonance, radiated essentially entirely through the f-holes as expected while A1, the first longitudinal cavity mode with a node at the f-holes, had no significant f-hole radiation. The observed A1 radiation comes from an indirect radiation mechanism, induced corpus motion approximately mirroring the cavity pressure profile seen for violinlike bowed string instruments across a wide range of sizes. The first estimates of the fraction of radiation from the f-holes F(f) indicate that some low frequency corpus modes thought to radiate only via surface motion (notably the first corpus bending modes) had significant radiation through the f-holes, in agreement with net volume changes estimated from experimental modal analysis. F(f) generally trended lower with increasing frequency, following corpus mobility decreases. The f-hole directivity (top/back radiativity ratio) was generally higher than whole-violin directivity.

  19. Unraveling mysteries of personal performance style; biomechanics of left-hand position changes (shifting) in violin performance.

    Science.gov (United States)

    Visentin, Peter; Li, Shiming; Tardif, Guillaume; Shan, Gongbing

    2015-01-01

    Instrumental music performance ranks among the most complex of learned human behaviors, requiring development of highly nuanced powers of sensory and neural discrimination, intricate motor skills, and adaptive abilities in a temporal activity. Teaching, learning and performing on the violin generally occur within musico-cultural parameters most often transmitted through aural traditions that include both verbal instruction and performance modeling. In most parts of the world, violin is taught in a manner virtually indistinguishable from that used 200 years ago. The current study uses methods from movement science to examine the "how" and "what" of left-hand position changes (shifting), a movement skill essential during violin performance. In doing so, it begins a discussion of artistic individualization in terms of anthropometry, the performer-instrument interface, and the strategic use of motor behaviors. Results based on 540 shifting samples, a case series of 6 professional-level violinists, showed that some elements of the skill were individualized in surprising ways while others were explainable by anthropometry, ergonomics and entrainment. Remarkably, results demonstrated each violinist to have developed an individualized pacing for shifts, a feature that should influence timing effects and prove foundational to aesthetic outcomes during performance. Such results underpin the potential for scientific methodologies to unravel mysteries of performance that are associated with a performer's personal artistic style.

  20. Unraveling mysteries of personal performance style; biomechanics of left-hand position changes (shifting in violin performance

    Directory of Open Access Journals (Sweden)

    Peter Visentin

    2015-10-01

    Full Text Available Instrumental music performance ranks among the most complex of learned human behaviors, requiring development of highly nuanced powers of sensory and neural discrimination, intricate motor skills, and adaptive abilities in a temporal activity. Teaching, learning and performing on the violin generally occur within musico-cultural parameters most often transmitted through aural traditions that include both verbal instruction and performance modeling. In most parts of the world, violin is taught in a manner virtually indistinguishable from that used 200 years ago. The current study uses methods from movement science to examine the “how” and “what” of left-hand position changes (shifting, a movement skill essential during violin performance. In doing so, it begins a discussion of artistic individualization in terms of anthropometry, the performer-instrument interface, and the strategic use of motor behaviors. Results based on 540 shifting samples, a case series of 6 professional-level violinists, showed that some elements of the skill were individualized in surprising ways while others were explainable by anthropometry, ergonomics and entrainment. Remarkably, results demonstrated each violinist to have developed an individualized pacing for shifts, a feature that should influence timing effects and prove foundational to aesthetic outcomes during performance. Such results underpin the potential for scientific methodologies to unravel mysteries of performance that are associated with a performer’s personal artistic style.

  1. Prevalence and Associated Factors of Playing-Related Musculoskeletal Disorders in Brazilian Violin Players.

    Science.gov (United States)

    Kochem, Frederico B; Silva, Julio G

    2017-03-01

    To investigate the prevalence of playing-related musculoskeletal disorders (PRMD) and associated factors among violinists from the state of Rio de Janeiro, Brazil. This cross-sectional study included 106 violinists from eight cities in the state of Rio de Janeiro. Sociodemographic and musical characteristic data, pain symptoms, and upper-limb functionality were collected using the DASH and the Standardized Nordic Questionnaires. The associations between musculoskeletal complaints and possible predictors were analyzed by binary logistic regression. Of the 106 surveyed violin players, 86.8% reported at least one painful area in the last 12 months and 77.4% in the last week. These symptoms were responsible for the temporary interruption of musical activity in 8.1% of musicians. More than 50% of violinists showed dysfunctional upper limbs according to the DASH optional module. Women were more likely to develop musculoskeletal disorders (OR 4.4, CI 1.9-10.0, p<0.001). In addition, older musicians were more likely to report pain in the last 7 days (OR 3.3, CI 5.1-10.97; p=0.04) and also had higher scores on the DASH (OR 1.8, CI 1.1-3.1; p=0.01). Other factors associated with the development of PRMD were body mass index, practice hours per week, and final DASH score. Violinists living and working in the state of Rio de Janeiro have a high prevalence of PRMD, especially women and older musicians.

  2. A ‘Violin-Mode’ shadow sensor for interferometric gravitational wave detectors

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.

    2014-12-01

    This paper describes a system of four novel shadow detectors having, collectively, a displacement sensitivity of (69  ±  13) picometres (rms) / √Hz, at 500 Hz, over a measuring span of ±0.1 mm. The detectors were designed to monitor the vibrations of the 600 mm long, 400 μm diameter, silica suspension fibres of the mirrors for the Advanced LIGO (Laser Interferometer Gravitational wave Observatory) gravitational wave detectors, at the resonances of the so-called Violin Modes (VM). The VM detection system described here had a target sensitivity of 100 pm (rms)/ √Hz at 500 Hz, together with, ultimately, a required detection span of ±0.1 mm about the mean position of each fibre—in order to compensate for potential slow drift over time of fibre position, due to mechanical relaxation. The full sensor system, comprising emitters (sources of illumination) and shadow detectors, therefore met these specifications. Using these sensors, VM resonances having amplitudes of 1.2 nm (rms) were detected in the suspension fibres of an Advanced LIGO dummy test-mass. The VM bandwidth of the sensor, determined by its transimpedance amplifier, was 226 Hz-8.93 kHz at the -3 dB points. This paper focuses mainly on the detector side of the shadow sensors. The emitters are described in an accompanying paper.

  3. THE OLD PROVENÇAL BALLATAS FOR VOICE AND VIOLIN BY SNEJANA PISLARI: ISSUES OF FORMATION

    Directory of Open Access Journals (Sweden)

    COADĂ TATIANA

    2017-06-01

    Full Text Available The article offers a detailed analysis of one of the most interesting examples of domestic chamber vocal music of the end of the twentieth century — „The Old Provençal Ballatas” by S. Pislari on G. Faydit’s verses. Special attention is paid to the genre and stylistic features of the works, revealing the identity of the musical language. The main place is given to the issues of formamodelling in the „Old Provençal Ballata”, fact that is due to the innovative attitude of the composer to working with the poetic text. Written in disused colloquial dialect, it determines the choice of the basic means of musical expression — melody, harmony, texture. An important distinction of the work is the composition of its performers as well, a female voice and the violin, both are monophonic by their nature. The dialogical texture of the composition combines the features of contrast polyphony and heterophony, which further contributes to the individualization of the composer’s intent.

  4. A frequency-based characterization of spiccato bowing in violin performance.

    Science.gov (United States)

    Shan, Gongbing; Visentin, Peter; Wooldridge, Luke; Wang, Changdong; Connolly, Dennis

    2007-12-01

    Performance of instrumental music requires high precision and the automisation of motor control to free the performer to focus on the artistic outcome. To acquire this high skill, training is experience-based, involves one-on-one instruction, and requires long hours of repetitive practice. This approach is consistent with a traditional model of vocational apprenticeship. Practice habits and long hours associated with training have been identified as sometimes contributing to high rates of vocational injury among musicians. This study explores violin performance, identifying generalizable perceptual markers to bridge the gap between science and experience in pedagogical methodology. Kinematic data were collected using 3-D motion capture. Dynamic modeling was used to specify internal loads. Eleven professional-level musicians were tested, ranging in age from 21 to 47 years (M = 36 yr., SD = 6). The study identified several motor-learning markers, speed-dependent motor control phases (increasing effort, optimization, and approaching physiological limits), string-dependent motor control, and an unexpected sympathetic resonance between the two arms, notwithstanding their very different functions. This study suggests that instrumental performance could be aided by identifying markers related to musical outcomes, performers' perceptions, and motor skill acquisition.

  5. Left hand finger force in violin playing: tempo, loudness, and finger differences.

    Science.gov (United States)

    Kinoshita, Hiroshi; Obata, Satoshi

    2009-07-01

    A three-dimensional force transducer was installed in the neck of a violin under the A string at the D5 position in order to study the force with which the violinist clamps the string against the fingerboard under normal playing conditions. Violinists performed repetitive sequences of open A- and fingered D-tones using the ring finger at tempi of 1, 2, 4, 8, and 16 notes/s at mezzo-forte. At selected tempi, the effects of dynamic level and the use of different fingers were investigated as well. The force profiles were clearly dependent on tempo and dynamic level. At slow tempi, the force profiles were characterized by an initial pulse followed by a level force to the end of the finger contact period. At tempi higher than 2 Hz, only pulsed profiles were observed. The peak force exceeded 4.5 N at 1 and 2 Hz and decreased to 1.7 N at 16 Hz. All force and impulse values were lower at softer dynamic levels, and when using the ring or little finger compared to the index finger.

  6. A multi-technique chemical characterization of a Stradivari decorated violin top plate

    Science.gov (United States)

    Malagodi, M.; Canevari, C.; Bonizzoni, L.; Galli, A.; Maspero, F.; Martini, M.

    2013-08-01

    This paper focuses on the characterization of the materials of a violin top plate made by Antonio Stradivari (17th century), with different diagnostic techniques and with an integrated and non-destructive analytical methodology to study surface coatings and decorations. The UV-induced visible fluorescence, optical digital microscopy, ED-XRF associated with micro-FTIR spectroscopy analysis, and dendrochronology were performed. The investigations were aimed to identify the presence of original varnish layers and to characterize the composition of the decorations, either the inlaid purflings or the composite false-inlay strip between them. Several results were achieved: (i) evidence of the absence of varnish layers on the surface as a result of extended and inappropriate restoring; (ii) identification of the dye used for the black layers of the purflings; (iii) characterization of the black matrix and the white elements of the decoration. Furthermore, a dendrochronological dating was performed. A copy of the top plate was realized with materials similar to those identified on the Stradivari original; the same analyses performed on the original model were carried out on the same areas of the copy.

  7. Ion backscattering and X-ray investigations of violin varnish and wood

    International Nuclear Information System (INIS)

    Sigurd, D.; Tove, P.A.; Petersson, S.

    1980-01-01

    The use of Rutherford backscattering (RBS) of ions (i.e. α-particles) and excitation of characteristic X-rays by protons, for determining the elemental composition of the top layers of violin varnish and wood is described. The amount of elements such as C, O, Si, S, Ca, Cu, Fe, Ni, Zn, Pb has been measured, on the varnished and unvarnished sides of wood samples from old instrument makers such as A. Stradivari, G. Guarneri del Gesu, Santo Serafin, C. Tononi etc. Differences in both the shape of the RBS spectra and in the presence of different elements are found and discussed. The use of X-ray excitation by ions (i.e. protons) helps in assessing the presence of the different elements. X-ray investigations can be done with instruments in air while RBS (at least in the presently used form) has to be performed in a vacuum chamber. Apart from offering an aid in determining the materials and procedures which were used in fabricating acoustically excellent instruments, the method could be of value for identifying their authenticity. (orig.)

  8. Ion backscattering and x-ray investigations of violin varnish and wood

    Science.gov (United States)

    Arne Tove, Per; Sigurd, Dag; Petersson, Sture

    1980-01-01

    The use of Rutherford backscattering (RBS) of ions (i.e. α-particles) and excitation of characteristic X-rays by protons, for determining the elemental composition of the top layers of violin varnish and wood is described. The amount of elements such as C, O, Si, S, Ca, Cu, Fe, Ni, Zn, Pb has been measured, on the varnished and unvarnished sides of wood samples from old instrument makers such as A. Stradivari, G. Guarneri del Gesu, Santo Serafin, C. Tononi etc. Differences in both the shape of the RBS spectra and in the presence of different elements are found and discussed. The use of X-ray excitation by ions (i.e. protons) helps in assessing the presence of the different elements. X-ray investigations can be done with instruments in air while RBS (at least in the presently used form) has to be performed in a vacuum chamber. Apart from offering an aid in determining the materials and procedures which were used in fabricating acoustically excellent instruments, the method could be of value for identifying their authenticity.

  9. USCIS Backlog Elimination

    Data.gov (United States)

    Department of Homeland Security — USCIS is streamlining the way immigration benefits are delivered. By working smarter and eliminating redundancies, USCIS is bringing a business model to government....

  10. Analysis of High-Density Surface EMG and Finger Pressure in the Left Forearm of Violin Players: A Feasibility Study.

    Science.gov (United States)

    Cattarello, Paolo; Merletti, Roberto; Petracca, Francesco

    2017-09-01

    Wrist and finger flexor muscles of the left hand were evaluated using high-density surface EMG (HDsEMG) in 17 violin players. Pressure sensors also were mounted below the second string of the violin to evaluate, simultaneously, finger pressure. Electrode grid size was 110x70 mm (12x8 electrodes with interelectrode distance=10 mm and Ø=3 mm). The study objective was to observe the activation patterns of these muscles while the violinists sequentially played four notes--SI (B), DO# (C#), RE (D), MI (E)--at 2 bows/s (one bow up in 0.5 s and one down in 0.5 s) and 4 bows/s on the second string, while producing a constant (CONST) or ramp (RAMP) sound volume. HDsEMG images obtained while playing the notes were compared with those obtained during isometric radial or ulnar flexion of the wrist or fingers. Two image descriptors provided information on image differences. Results showed that the technique was reliable and provided reliable signals, and that recognizably different sEMG images could be associated with the four notes tested, despite the variability within and between subjects playing the same note. sEMG activity of the left hand muscles and pressure on the string in the RAMP task were strongly affected in some individuals by the sound volume (controlled by the right hand) and much less in other individuals. These findings question whether there is an individual or generally optimal way of pressing violin strings with the left hand. The answer to this question might substantially modify the teaching of string instruments.

  11. Thermal oxidation vitrification flue gas elimination system

    International Nuclear Information System (INIS)

    Kephart, W.; Angelo, F.; Clemens, M.

    1995-01-01

    With minor modifications to a Best Demonstrated Available Technology hazardous waste incinerator, it is possible to obtain combustion without potentially toxic emissions by using technology currently employed in similar applications throughout industry. Further, these same modifications will reduce waste handling over an extended operating envelope while minimizing energy consumption. Three by-products are produced: industrial grade carbon dioxide, nitrogen, and a final waste form that will exceed Toxicity Characteristics Leaching Procedures requirements and satisfy nuclear waste product consistency tests. The proposed system utilizes oxygen rather than air as an oxidant to reduce the quantities of total emissions, improve the efficiency of the oxidation reactions, and minimize the generation of toxic NO x emissions. Not only will less potentially hazardous constituents be generated; all toxic substances can be contained and the primary emission, carbon dioxide -- the leading ''greenhouse gas'' contributing to global warming -- will be converted to an industrial by-product needed to enhance the extraction of energy feedstocks from maturing wells. Clearly, the proposed configuration conforms to the provisions for Most Achievable Control Technology as defined and mandated for the private sector by the Clear Air Act Amendments of 1990 to be implemented in 1997 and still lacking definition

  12. Spatial distribution of surface EMG on trapezius and lumbar muscles of violin and cello players in single note playing.

    Science.gov (United States)

    Afsharipour, Babak; Petracca, Francesco; Gasparini, Mauro; Merletti, Roberto

    2016-12-01

    Musicians activate their muscles in different patterns, depending on their posture, the instrument being played, and their experience level. Bipolar surface electrodes have been used in the past to monitor such activity, but this method is highly sensitive to the location of the electrode pair. In this work, the spatial distribution of surface EMG (sEMG) of the right trapezius and right and left erector spinae muscles were studied in 16 violin players and 11 cello players. Musicians played their instrument one string at a time in sitting position with/without backrest support. A 64 sEMG electrode (16×4) grid, 10mm inter-electrode distance (IED), was placed over the middle and lower trapezius (MT and LT) of the bowing arm. Two 16×2 electrode grids (IED=10mm) were placed on the left and right erector spinae muscles. Subjects played each of the four strings of the instrument either in large (1bow/s) or detaché tip/tail (8bows/s) bowing in two sessions (two days). In each of two days, measurements were repeated after half an hour of exercise to see the effect of exercise on the muscle activity and signal stability. A "muscle activity index" (MAI) was defined as the spatial average of the segmented active region of the RMS map. Spatial maps were automatically segmented using the watershed algorithm and thresholding. Results showed that, for violin players, sliding the bow upward from the tip toward the tail results in a higher MAI for the trapezius muscle than a downward bow. On the contrary, in cello players, higher MAI is produced in the tail to tip movement. For both instruments, an increasing MAI in the trapezius was observed as the string position became increasingly lateral, from string 1 (most medial) toward string 4 (most lateral). Half an hour of performance did not cause significant differences between the signal quality and the MAI values measured before and after the exercise. The MAI of the left and right erector spinae was smaller in the case of

  13. An AC modulated near infrared gain calibration system for a "Violin-Mode" transimpedance amplifier, intended for advanced LIGO suspensions

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.

    2016-07-01

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which a 40 kg test-mass/mirror is suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation, and a "tall-thin" rectangular silicon photodiode detector, which together were to bracket the fibre under test. The photodiode was positioned so as to be sensitive (primarily) to transverse "Violin-Mode" vibrations of such a fibre, via the oscillatory movement of the shadow cast by the fibre, as this moved across the face of the detector. In this prototype shadow sensing system the photodiode was interfaced to a purpose-built transimpedance amplifier, this having both AC and DC outputs. A quasi-static calibration was made of the sensor's DC responsivity, i.e., incremental rate of change of output voltage versus fibre position, by slowly scanning a fused-silica fibre sample transversely through the illuminating beam. The work reported here concerns the determination of the sensor's more important AC (Violin-Mode) responsivity. Recognition of the correspondence between direct AC modulation of the source, and actual Violin-Mode signals, and of the transformative role of the AC/DC gain ratio for the amplifier, at any modulation frequency, f, resulted in the construction of the AC/DC calibration source described here. A method for determining in practice the transimpedance AC/DC gain ratio of the photodiode and amplifier, using this source, is illustrated by a specific numerical example, and the gain ratio for the prototype sensing system is reported over the frequency range 1 Hz-300 kHz. In fact, a maximum DC responsivity of 1.26 kV.m-1 was measured using the prototype photodiode sensor and amplifier discussed here. Therefore, the measured AC/DC transimpedance gain ratio

  14. Connecting science and the musical arts in teaching tone quality: Integrating Helmholtz motion and master violin teachers' pedagogies

    Science.gov (United States)

    Collins, Cheri D.

    Is it possible for students to achieve better tone quality from even their factory-made violins? All violins, regardless of cost, have a common capacity for good tone in certain frequencies. These signature modes outline the first position range of a violin (196-600 hertz). To activate this basic capacity of all violins, the string must fully vibrate. To accomplish this the bow must be pulled across the string with enough pressure (relative to its speed and contact point) for the horsehairs to catch. This friction permits the string to vibrate in Helmholtz Motion, which produces a corner that travels along the edge of the string between the bridge and the nut. Creating this corner is the most fundamental technique for achieving good tone. The findings of celebrated scientists Ernest Chladni, Hermann von Helmholtz, and John Schelleng will be discussed and the tone-production pedagogy of master teachers Carl Flesch, Ivan Galamian, Robert Gerle, and Simon Fischer will be investigated. Important connections between the insights of these scientists and master teachers are evident. Integrating science and art can provide teachers with a better understanding of the characteristics of good tone. This can help their students achieve the best possible sound from their instruments. In the private studio the master teacher may not use the words "Helmholtz Motion." Yet through modeling and listening students are able to understand and create a quality tone. Music teachers without experience in string performance may be assigned to teach strings in classroom and ensembles settings. As a result modeling good tone is not always possible. However, all teachers and conductors can understand the fundamental behavior of string vibration and adapt their instruction strategies towards student success. Better tonal quality for any string instrument is ultimately achieved. Mastery and use of the Helmholtz Motion benefits teachers and students alike. Simple practice exercises for teaching

  15. An AC modulated near infrared gain calibration system for a "Violin-Mode" transimpedance amplifier, intended for advanced LIGO suspensions.

    Science.gov (United States)

    Lockerbie, N A; Tokmakov, K V

    2016-07-01

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which a 40 kg test-mass/mirror is suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation, and a "tall-thin" rectangular silicon photodiode detector, which together were to bracket the fibre under test. The photodiode was positioned so as to be sensitive (primarily) to transverse "Violin-Mode" vibrations of such a fibre, via the oscillatory movement of the shadow cast by the fibre, as this moved across the face of the detector. In this prototype shadow sensing system the photodiode was interfaced to a purpose-built transimpedance amplifier, this having both AC and DC outputs. A quasi-static calibration was made of the sensor's DC responsivity, i.e., incremental rate of change of output voltage versus fibre position, by slowly scanning a fused-silica fibre sample transversely through the illuminating beam. The work reported here concerns the determination of the sensor's more important AC (Violin-Mode) responsivity. Recognition of the correspondence between direct AC modulation of the source, and actual Violin-Mode signals, and of the transformative role of the AC/DC gain ratio for the amplifier, at any modulation frequency, f, resulted in the construction of the AC/DC calibration source described here. A method for determining in practice the transimpedance AC/DC gain ratio of the photodiode and amplifier, using this source, is illustrated by a specific numerical example, and the gain ratio for the prototype sensing system is reported over the frequency range 1 Hz-300 kHz. In fact, a maximum DC responsivity of 1.26 kV.m(-1) was measured using the prototype photodiode sensor and amplifier discussed here. Therefore, the measured AC/DC transimpedance gain

  16. A ‘Violin-Mode’ shadow sensor for interferometric gravitational wave detectors

    International Nuclear Information System (INIS)

    Lockerbie, N A; Tokmakov, K V

    2014-01-01

    This paper describes a system of four novel shadow detectors having, collectively, a displacement sensitivity of (69  ±  13) picometres (rms) / √Hz, at 500 Hz, over a measuring span of ±0.1 mm. The detectors were designed to monitor the vibrations of the 600 mm long, 400 μm diameter, silica suspension fibres of the mirrors for the Advanced LIGO (Laser Interferometer Gravitational wave Observatory) gravitational wave detectors, at the resonances of the so-called Violin Modes (VM). The VM detection system described here had a target sensitivity of 100 pm (rms)/ √Hz at 500 Hz, together with, ultimately, a required detection span of ±0.1 mm about the mean position of each fibre—in order to compensate for potential slow drift over time of fibre position, due to mechanical relaxation. The full sensor system, comprising emitters (sources of illumination) and shadow detectors, therefore met these specifications. Using these sensors, VM resonances having amplitudes of 1.2 nm (rms) were detected in the suspension fibres of an Advanced LIGO dummy test-mass. The VM bandwidth of the sensor, determined by its transimpedance amplifier, was 226 Hz–8.93 kHz at the −3 dB points. This paper focuses mainly on the detector side of the shadow sensors. The emitters are described in an accompanying paper. (paper)

  17. Universal leakage elimination

    International Nuclear Information System (INIS)

    Byrd, Mark S.; Lidar, Daniel A.; Wu, L.-A.; Zanardi, Paolo

    2005-01-01

    'Leakage' errors are particularly serious errors which couple states within a code subspace to states outside of that subspace, thus destroying the error protection benefit afforded by an encoded state. We generalize an earlier method for producing leakage elimination decoupling operations and examine the effects of the leakage eliminating operations on decoherence-free or noiseless subsystems which encode one logical, or protected qubit into three or four qubits. We find that by eliminating a large class of leakage errors, under some circumstances, we can create the conditions for a decoherence-free evolution. In other cases we identify a combined decoherence-free and quantum error correcting code which could eliminate errors in solid-state qubits with anisotropic exchange interaction Hamiltonians and enable universal quantum computing with only these interactions

  18. O violino violado: o entremear das vozes esquecidas das rabecas e de "outros violinos" The fiddled violin: the clamor of forgotten voices from the Brazilian rabecas and "other violins"

    Directory of Open Access Journals (Sweden)

    Luiz Henrique Fiaminghi

    2009-01-01

    Full Text Available A representação do violino como instrumento musical hegemônico é um fato incontestável se considerarmos sua presença nos mais diversos âmbitos das práticas da música ocidental. As últimas décadas presenciaram, porém, a emergência de algumas vozes dissonantes: as práticas interpretativas historicamente informadas (Historically Informed Performance ou HIP redescobriram o violino barroco e todo o seu aparato técnico; no Brasil, a rabeca mostrou suas potencialidades, não mais somente nas mãos de ardorosos defensores da cultura popular, mas de músicos em busca de novas sonoridades. Tomando como exemplo a intersecção do popular e erudito contido nas peças para rabeca escritas por José Eduardo Gramani, pretende-se aqui, sobretudo, mais do que apresentar respostas definitivas, abrir novas questões relacionadas ao ensino do violino no mundo contemporâneo, a partir da inserção de instrumentos esquecidos pela história oficial. Neste sentido, reflete alguns dos aspectos defendidos por Walter Benjamin em Sobre o conceito de história, e traz para a pauta das discussões sobre interpretação musical a questão da padronização imposta pela indústria cultural.The representation of the violin as a hegemonic musical instrument is an undisputed fact, regarding its presence within the widest scope of Western musical performance. The last decades have witnessed, however, the emergency of some dissonant voices: the Historically Informed Performance (HIP practice has rediscovered the baroque violin and all its technical apparatus; the Brazilian fiddle rabeca claimed to be heard through its own voice, despite the neglectful approach from the mainstream scholars and musicians. Departing from the intersection between popular and erudite culture that characterizes most of Brazilian José Eduardo Gramani’s music written for rabeca, this article raises reflections about violin teaching in a multi-cultural society, according to the concepts

  19. Radioactive wastes eliminating device

    International Nuclear Information System (INIS)

    Mitsutsuka, Norimasa.

    1979-01-01

    Purpose: To eliminate impurities and radioactive wastes by passing liquid sodium in a cold trap and an adsorption device. Constitution: Heated sodium is partially extracted from the core of a nuclear reactor by way of a pump, flown into and cooled in heat exchangers and then introduced into a cold trap for removal of impurities. The liquid sodium eliminated with impurities is introduced into an adsorption separator and purified by the elimination of radioactive wastes. The purified sodium is returned to the nuclear reactor. A heater is provided between the cold trap and the adsorption separator, so that the temperature of the liquid sodium introduced into the adsorption separator is not lower than the minimum temperature in the cold trap to thereby prevent deposition of impurities in the adsorption separator. (Kawakami, Y.)

  20. Minding Rachlin's Eliminative Materialism

    Science.gov (United States)

    McDowell, J. J.

    2012-01-01

    Rachlin's teleological behaviorism eliminates the first-person ontology of conscious experience by identifying mental states with extended patterns of behavior, and thereby maintains the materialist ontology of science. An alternate view, informed by brain-based and externalist philosophies of mind, is shown also to maintain the materialist…

  1. Eliminating Perinatal HIV Transmission

    Centers for Disease Control (CDC) Podcasts

    In this podcast, CDC’s Dr. Steve Nesheim discusses perinatal HIV transmission, including the importance of preventing HIV among women, preconception care, and timely HIV testing of the mother. Dr. Nesheim also introduces the revised curriculum Eliminating Perinatal HIV Transmission intended for faculty of OB/GYN and pediatric residents and nurse midwifery students.

  2. Three dimensional mathematical modeling of violin plate surfaces: An approach based on an ensemble of contour lines.

    Science.gov (United States)

    Piantadosi, Steven

    2017-01-01

    This paper presents an approach to describing the three dimensional shape of a violin plate in mathematical form. The shape description begins with standard contour lines and ends with an equation for a surface in three dimensional space. The traditional specification of cross sectional arching is unnecessary. Advantages of this approach are that it employs simple and universal description of plate geometry and yields a complete, smoothed, precise mathematical equation of the plate that is suitable for modern three dimensional production. It is quite general and suitable for both exterior and interior plate surfaces, yielding the ability to control thicknesses along with shape. This method can produce mathematical descriptions with tolerances easily less than 0.001 millimeters suitable for modern computerized numerical control carving and hand finishing.

  3. Use of Linkage Technique in Johannes Brahms’ op. 78 and Leopoldo Miguéz’s op.14 Violin Sonatas

    Directory of Open Access Journals (Sweden)

    Desirée Johanna Mesquita Mayr

    2016-11-01

    Full Text Available This paper specifically addresses linkage, a characteristically Brahmsian technique employed in the formation of musical ideas through the gradual transformation of precedent elements, being considered an indicator in the use of developing variation. After a detailed review of the literature encompassing definitions, classification and exemplification considering works of three theorists (FRISCH, 1984. SMITH, 2007. RAHN, 2015, an original proposal for a typology of linkage is presented. We compare a special occurrence of linkage in Brahms’ Violin Sonata, op. 78 to two similar occurrences in Leopoldo Miguéz’s sonata op. 14, a work of the same genre.. The results reinforce the hypothesis that Miguéz had employed organic constructive processes in his piece.

  4. Playing a 3-Stringed Violin: Innovation via the Joint Evolution of People, Process, and Knowledge Management System

    Science.gov (United States)

    Cooper, Lynne P.

    2010-01-01

    Users continuously evaluate the value and performance of their Knowledge Management Systems (KMS). As suggested by a punctuated socio-technical system process model, today's success can quickly become tomorrow's failure should the KMS fail to meet evolving needs and expectations. The more deeply a tool is embedded in the actual work process, the more vulnerable it is to emergent changes and perturbations. This paper uses the metaphor of a "3-stringed violin" to explore how differing levels of user knowledge about tools and processes can lead to system perturbations and how the active involvement of other actors can dampen the impact of perturbations, i.e., help the system survive the operational equivalent of a broken string. Recommendations suggest ways to increase system resiliency and contribute to incremental innovation.

  5. Three dimensional motion capture applied to violin playing: A study on feasibility and characterization of the motor strategy.

    Science.gov (United States)

    Ancillao, Andrea; Savastano, Bernardo; Galli, Manuela; Albertini, Giorgio

    2017-10-01

    Playing string instruments requires advanced motor skills and a long training that is often spent in uncomfortable postures that may lead to injuries or musculoskeletal disorders. Thus, it is interesting to objectively characterize the motor strategy adopted by the players. In this work, we implemented a method for the quantitative analysis of the motor performance of a violin player. The proposed protocol takes advantage of an optoelectronic system and some infra-red reflecting markers in order to track player's motion. The method was tested on a professional violin player performing a legato bowing task. The biomechanical strategy of the upper limb and bow positioning were described by means of quantitative parameters and motion profiles. Measured quantities were: bow trajectory, angles, tracks, velocity, acceleration and jerk. A good repeatability of the bowing motion (CV < 2%) and high smoothness (jerk < 5 m/s 3 ) were observed. Motion profiles of shoulder, elbow and wrist were repeatable (CV < 7%) and comparable to the curves observed in other studies. Jerk and acceleration profiles demonstrated high smoothness in the ascending and descending phases of bowing. High variability was instead observed for the neck angle (CV ∼56%). "Quantitative" measurements, instead of "qualitative" observation, can support the diagnosis of motor disorders and the accurate evaluation of musicians' skills. The proposed protocol is a powerful tool for the description of musician's performance, that may be useful to document improvements in playing abilities and to adjust training strategies. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Eliminating Perinatal HIV Transmission

    Centers for Disease Control (CDC) Podcasts

    2012-11-26

    In this podcast, CDC’s Dr. Steve Nesheim discusses perinatal HIV transmission, including the importance of preventing HIV among women, preconception care, and timely HIV testing of the mother. Dr. Nesheim also introduces the revised curriculum Eliminating Perinatal HIV Transmission intended for faculty of OB/GYN and pediatric residents and nurse midwifery students.  Created: 11/26/2012 by Division of HIV/AIDS Prevention.   Date Released: 11/26/2012.

  7. A source of illumination for low-noise ‘Violin-Mode’ shadow sensors, intended for use in interferometric gravitational wave detectors

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.; Strain, K. A.

    2014-12-01

    A low-noise source of illumination is described for shadow sensors having a displacement sensitivity of (69  ±  13) picometres (rms)/√Hz, at 500 Hz, over a measuring span of ±0.1 mm. These sensors were designed to detect ‘Violin-Mode’ resonances in the suspension fibres of the test-masses/mirrors for the Advanced LIGO (Laser Interferometer Gravitational wave Observatory) gravitational wave detectors. The source of illumination (emitter) described here used a single column of 8 × miniature near infrared LEDs (λ = 890 nm). These emitters cast the shadows of 400 μm diameter fused silica suspension fibres onto their complementary shadow-displacement detectors, located at a distance of 74 fibre diameters (29.6 mm) behind the axes of the fibres themselves. Violin-Mode vibrations of each fibre were sensed as differential ac photocurrents in the corresponding ‘split-photodiode’ detector. This paper describes the design, construction, noise analysis, and measures that were taken in the conception of the emitters, in order to produce high-contrast shadows at such distant detectors. In this way it proved possible to obtain, simultaneously, a very high transfer sensitivity to Violin-Mode vibration of the fibres, and a very low level of detection noise—close to the fundamental shot noise limit—whilst remaining within the constraints of this simple design of emitter. The shadow detector is described in an accompanying paper.

  8. Risks: diagnosing and eliminating

    Directory of Open Access Journals (Sweden)

    Yuriy A. Tikhomirov

    2016-01-01

    Full Text Available Objective to develop conceptual theoretical and legal provisions and scientific recommendations on the identification analysis and elimination of risk. Methods universal dialectic method of cognition as well as scientific and private research methods based on it. Results the system was researched of risks diagnostics in the legal sphere and mechanism of influencing the quotrisk situationsquot and their consequences damage to the environment and harm to society. The concept of risk in the legal sphere was formulated the author39s classification of risks in the legal sphere is presented. The rules of analysis evaluation and prevention of risks and the model risk management framework are elaborated. Scientific novelty the mechanism for the identification analysis and elimination of risk has been developed and introduced into scientific circulation the author has proposed the classification and types of risks the reasons and the conditions promoting the risk occurrence. Practical significance the provisions and conclusions of the article can be used in the scientific lawmaking and lawenforcement activity as well as in the educational process of higher educational establishments. nbsp

  9. Padrões físicos inadequados na performance musical de estudantes de violino Inadequate physical patterns in musical performance of violin students

    Directory of Open Access Journals (Sweden)

    Carolina Valverde Alves

    2012-12-01

    Full Text Available O presente artigo, uma exposição resumida da dissertação de mestrado (2008, discute a observação e avaliação dos problemas corporais que permeiam a prática de seis estudantes de violino do curso de Graduação da Escola de Música da UFMG. Dados foram colhidos através de observação, filmes e fotos de seis alunos de violino em quatro situações diferentes de performance no contexto do curso, além de avaliações fisioterápicas realizadas no consultório de Fisioterapia da pesquisadora. Estes dados foram apresentados a um painel composto por quatro observadores da área da saúde e da música. A análise destes dados revela que os seis alunos de violino apresentaram padrões físicos inadequados que poderiam prejudicar sua saúde e, consequentemente, sua performance. Além disso, foi conduzida uma pesquisa bibliográfica envolvendo estudos relacionados à Anatomia, Biomecânica e Cinesiologia. Esperamos que este artigo possa chamar a atenção dos violinistas e professores de violino para a importância de uma consciência corporal durante a performance do instrumento, que vise mais simetria e relaxamento das regiões corporais envolvidas no ato de tocar o violino.This article, a summary of the Master thesis (2008, discusses the observation and evaluation of physical problems presented by six Bachelors students of the Music School of UFMG (Brazil, in their violin practice. Data was collected through observation, films and photos of six violin students at four different situations of performance in the context of their program, besides the physiotherapeutic assessments held in the office of the physiotherapist researcher. This data was then submitted to a panel composed of four observers, health and music specialists. The analysis of this data reveals that the six violin students showed inappropriate physical patterns that could jeopardize their performance as well as their health. Also, a bibliographic survey related to the Anatomy

  10. [Illness and death of the violin virtuoso Nicolò Paganini--interpretation based on new hair investigations].

    Science.gov (United States)

    Kijewski, Harald; Beck, Jens; Reus, Ulrich

    2012-01-01

    The violin virtuoso Paganini died at Nice in 1840 after a long, severe illness. It is undisputed that Paganini was treated with mercury for suspected syphilis and lost all his teeth in 1828 because of that treatment. In the comprehensive literature published on this topic, most authors assume that the terminal complaints and his death were caused by tuberculosis. On the other hand, the hypothesis that he may have died from mercury poisoning was rejected, because there was no information available supporting this assumption. The authors performed morphological investigations using light microscopy and raster electron microscopy (REM). The examined hairs corresponded to a growth phase of > 1 year and < 3 years before death. Structural damage to the hairs indicate heavy metal intoxication in that phase of life; compatible results were supplied by the complex investigations using ICP mass spectrometry and TXRF, which revealed high concentrations of mercury. Using ICP-MS, the mean value for mercury found in the hair sample was 15.4 microg/g with a standard deviation of 0.7 microg/g. The values obtained when investigating segments of single hairs showed high dispersion, but overlapped with the values from the area investigated using ICP-MS. Information not yet considered in the literature support the diagnosis of syphilis and provide a complete and unambiguous explanation for Paganini's death on the basis of the mercury concentrations found.

  11. Anterioposterior spinal curvatures and magnitude of asymmetry in the trunk in musicians playing the violin compared with nonmusicians.

    Science.gov (United States)

    Barczyk-Pawelec, Katarzyna; Sipko, Tomasz; Demczuk-Włodarczyk, Ewa; Boczar, Agata

    2012-05-01

    Playing an instrument often requires a certain posture and asymmetric position that may affect the anteroposterior spinal curvatures and may lead to postural asymmetry. The aim of the study was to evaluate the spinal curvatures in the sagittal plane and the magnitude of asymmetries in the trunk in the frontal plane in a group of music students in comparison with a control group. The group of 67 students aged 20 to 26 years was made up of 2 subgroups: the musicians (violin playing students of the Academy of Music in Wroclaw) and the control group (physical therapy students who played no instruments). The examination included an interview, measuring of somatic characteristics, and evaluation of body posture by means of the photogrammetric method. The spinal curvatures of the instrumentalists in the sagittal plane differ from the control group mainly in terms of length and depth parameters. Compared with the control group, the musicians were characterized by statistically more significantly longer and deeper thoracic kyphosis (P < .01) and more shallow lumbar lordosis (P < .05), a greater angle of thoracic kyphosis (P < .005), and a smaller inclination angle of the thoracolumbar and lumbosacral section of the spine (P < .01). In the group of musicians, the asymmetries in the area of shoulders and waist triangles as well as the distance of the spinous processes from the C7 to S1 line were more frequent. Copyright © 2012 National University of Health Sciences. Published by Mosby, Inc. All rights reserved.

  12. Eliminating Rabies in Estonia

    Science.gov (United States)

    Cliquet, Florence; Robardet, Emmanuelle; Must, Kylli; Laine, Marjana; Peik, Katrin; Picard-Meyer, Evelyne; Guiot, Anne-Laure; Niin, Enel

    2012-01-01

    The compulsory vaccination of pets, the recommended vaccination of farm animals in grazing areas and the extermination of stray animals did not succeed in eliminating rabies in Estonia because the virus was maintained in two main wildlife reservoirs, foxes and raccoon dogs. These two species became a priority target therefore in order to control rabies. Supported by the European Community, successive oral vaccination (OV) campaigns were conducted twice a year using Rabigen® SAG2 baits, beginning in autumn 2005 in North Estonia. They were then extended to the whole territory from spring 2006. Following the vaccination campaigns, the incidence of rabies cases dramatically decreased, with 266 cases in 2005, 114 in 2006, four in 2007 and three in 2008. Since March 2008, no rabies cases have been detected in Estonia other than three cases reported in summer 2009 and one case in January 2011, all in areas close to the South-Eastern border with Russia. The bait uptake was satisfactory, with tetracycline positivity rates ranging from 85% to 93% in foxes and from 82% to 88% in raccoon dogs. Immunisation rates evaluated by ELISA ranged from 34% to 55% in foxes and from 38% to 55% in raccoon dogs. The rabies situation in Estonia was compared to that of the other two Baltic States, Latvia and Lithuania. Despite regular OV campaigns conducted throughout their territory since 2006, and an improvement in the epidemiological situation, rabies has still not been eradicated in these countries. An analysis of the number of baits distributed and the funding allocated by the European Commission showed that the strategy for rabies control is more cost-effective in Estonia than in Latvia and Lithuania. PMID:22393461

  13. A source of illumination for low-noise ‘Violin-Mode’ shadow sensors, intended for use in interferometric gravitational wave detectors

    International Nuclear Information System (INIS)

    Lockerbie, N A; Tokmakov, K V; Strain, K A

    2014-01-01

    A low-noise source of illumination is described for shadow sensors having a displacement sensitivity of (69  ±  13) picometres (rms)/√Hz, at 500 Hz, over a measuring span of ±0.1 mm. These sensors were designed to detect ‘Violin-Mode’ resonances in the suspension fibres of the test-masses/mirrors for the Advanced LIGO (Laser Interferometer Gravitational wave Observatory) gravitational wave detectors. The source of illumination (emitter) described here used a single column of 8 × miniature near infrared LEDs (λ = 890 nm). These emitters cast the shadows of 400 μm diameter fused silica suspension fibres onto their complementary shadow-displacement detectors, located at a distance of 74 fibre diameters (29.6 mm) behind the axes of the fibres themselves. Violin-Mode vibrations of each fibre were sensed as differential ac photocurrents in the corresponding ‘split-photodiode’ detector. This paper describes the design, construction, noise analysis, and measures that were taken in the conception of the emitters, in order to produce high-contrast shadows at such distant detectors. In this way it proved possible to obtain, simultaneously, a very high transfer sensitivity to Violin-Mode vibration of the fibres, and a very low level of detection noise—close to the fundamental shot noise limit—whilst remaining within the constraints of this simple design of emitter. The shadow detector is described in an accompanying paper. (paper)

  14. The motor system plays the violin: a musical metaphor inferred from the oscillatory activity of the α-motoneuron pools during locomotion.

    Science.gov (United States)

    Chiovetto, Enrico

    2011-04-01

    Despite substantial advances in the field, particularly resulting from physiological studies in animals, the neural mechanisms underlying the generation of many motor behaviors in humans remain unclear. A recent study (Cappellini G et al. J Neurophysiol 104: 3064-3073, 2010) sheds more light on this topic. Like the string of a violin, the α-motoneuron pools in the spinal cord during locomotion show continuous and oscillatory patterns of activation. In this report, the implications and relevance of this finding are discussed in a general framework that includes neurophysiology, optimal control theory, and robotics.

  15. An AC modulated near infrared gain calibration system for a “Violin-Mode” transimpedance amplifier, intended for advanced LIGO suspensions

    International Nuclear Information System (INIS)

    Lockerbie, N. A.; Tokmakov, K. V.

    2016-01-01

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which a 40 kg test-mass/mirror is suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation, and a “tall-thin” rectangular silicon photodiode detector, which together were to bracket the fibre under test. The photodiode was positioned so as to be sensitive (primarily) to transverse “Violin-Mode” vibrations of such a fibre, via the oscillatory movement of the shadow cast by the fibre, as this moved across the face of the detector. In this prototype shadow sensing system the photodiode was interfaced to a purpose-built transimpedance amplifier, this having both AC and DC outputs. A quasi-static calibration was made of the sensor’s DC responsivity, i.e., incremental rate of change of output voltage versus fibre position, by slowly scanning a fused-silica fibre sample transversely through the illuminating beam. The work reported here concerns the determination of the sensor’s more important AC (Violin-Mode) responsivity. Recognition of the correspondence between direct AC modulation of the source, and actual Violin-Mode signals, and of the transformative role of the AC/DC gain ratio for the amplifier, at any modulation frequency, f, resulted in the construction of the AC/DC calibration source described here. A method for determining in practice the transimpedance AC/DC gain ratio of the photodiode and amplifier, using this source, is illustrated by a specific numerical example, and the gain ratio for the prototype sensing system is reported over the frequency range 1 Hz–300 kHz. In fact, a maximum DC responsivity of 1.26 kV.m"−"1 was measured using the prototype photodiode sensor and amplifier discussed here. Therefore, the measured AC

  16. An AC modulated near infrared gain calibration system for a “Violin-Mode” transimpedance amplifier, intended for advanced LIGO suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Lockerbie, N. A.; Tokmakov, K. V. [SUPA (Scottish Universities Physics Alliance) Department of Physics, University of Strathclyde, 107 Rottenrow, Glasgow G4 0NG (United Kingdom)

    2016-07-15

    The background to this work was a prototype shadow sensor, which was designed for retro-fitting to an advanced LIGO (Laser Interferometer Gravitational wave Observatory) test-mass/mirror suspension, in which a 40 kg test-mass/mirror is suspended by four approximately 600 mm long by 0.4 mm diameter fused-silica suspension fibres. The shadow sensor comprised a LED source of Near InfraRed (NIR) radiation, and a “tall-thin” rectangular silicon photodiode detector, which together were to bracket the fibre under test. The photodiode was positioned so as to be sensitive (primarily) to transverse “Violin-Mode” vibrations of such a fibre, via the oscillatory movement of the shadow cast by the fibre, as this moved across the face of the detector. In this prototype shadow sensing system the photodiode was interfaced to a purpose-built transimpedance amplifier, this having both AC and DC outputs. A quasi-static calibration was made of the sensor’s DC responsivity, i.e., incremental rate of change of output voltage versus fibre position, by slowly scanning a fused-silica fibre sample transversely through the illuminating beam. The work reported here concerns the determination of the sensor’s more important AC (Violin-Mode) responsivity. Recognition of the correspondence between direct AC modulation of the source, and actual Violin-Mode signals, and of the transformative role of the AC/DC gain ratio for the amplifier, at any modulation frequency, f, resulted in the construction of the AC/DC calibration source described here. A method for determining in practice the transimpedance AC/DC gain ratio of the photodiode and amplifier, using this source, is illustrated by a specific numerical example, and the gain ratio for the prototype sensing system is reported over the frequency range 1 Hz–300 kHz. In fact, a maximum DC responsivity of 1.26 kV.m{sup −1} was measured using the prototype photodiode sensor and amplifier discussed here. Therefore, the measured AC

  17. Elimination device for metal impurities

    International Nuclear Information System (INIS)

    Yanagisawa, Ko.

    1982-01-01

    Purpose: To enable reuse of adsorbing materials by eliminating Fe 3 O 4 films reduced with adsorbing performance by way of electrolytic polishing and then forming fresh membranes using high temperature steams. Constitution: An elimination device is provided to a coolant clean-up system of a reactor for eliminating impurities such as cobalt. The elimination device comprises adsorbing materials made of stainless steel tips or the likes having Fe 3 O 4 films. The adsorbing materials are regenerated by applying an electric current between grid-like cathode plates and anode plates to leach out the Fe 3 O 4 films, washing out the electrolytic solution by cleaning water and then applying steams at high temperature onto the adsorbing materials to thereby form fresh Fe 3 O 4 films again thereon. The regeneration of the adsorbing materials enables to eliminate Co 60 and the like in the primary coolant efficiently. (Moriyama, K.)

  18. Quasi-static displacement calibration system for a "Violin-Mode" shadow-sensor intended for Gravitational Wave detector suspensions

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.

    2014-10-01

    This paper describes the design of, and results from, a calibration system for optical linear displacement (shadow) sensors. The shadow sensors were designed to detect "Violin-Mode" (VM) resonances in the 0.4 mm diameter silica fibre suspensions of the test masses/mirrors of Advanced Laser Interferometer Gravitational Wave Observatory gravitational wave interferometers. Each sensor illuminated the fibre under test, so as to cast its narrow shadow onto a "synthesized split photodiode" detector, the shadow falling over adjacent edges of the paired photodiodes. The apparatus described here translated a vertically orientated silica test fibre horizontally through a collimated Near InfraRed illuminating beam, whilst simultaneously capturing the separate DC "shadow notch" outputs from each of the paired split photodiode detectors. As the ratio of AC to DC photocurrent sensitivities to displacement was known, a calibration of the DC response to quasi-static shadow displacement allowed the required AC sensitivity to vibrational displacement to be found. Special techniques are described for generating the required constant scan rate for the test fibre using a DC motor-driven stage, for removing "jitter" at such low translation rates from a linear magnetic encoder, and so for capturing the two shadow-notch signals at each micrometre of the test fibre's travel. Calibration, across the four detectors of this work, gave a vibrational responsivity in voltage terms of (9.45 ± 1.20) MV (rms)/m, yielding a VM displacement sensitivity of (69 ± 13) pm (rms)/√Hz, at 500 Hz, over the required measuring span of ±0.1 mm.

  19. Advantages of thermal processes to reduce the amounts of sludge; Interet des procedes thermiques dans la problematique de la reduction et/ou de l'elimination des boues?

    Energy Technology Data Exchange (ETDEWEB)

    Cretenot, D. [Vivendi Water System, 94 - Saint-Maurice (France); Chauzy, J.; Fernandes, P.; Patria, L. [Anjou Recherche, 78 - Maisons-Laffite (France)

    2003-02-01

    All the actors in the water field have to face the fate of sludge generated by wastewater treatment. The challenge they have to take up is not only on the good quality of the final effluent but also on the by-products treatment performance. Reduction, stabilization and pasteurization are the key-words in the present trend of sludge treatment., There are many technologies that reduce the final volume of sludge by lowering their dry solids concentration, but only the treatment lines with thermal processes can both reduce the amounts of sludge generated, and also issue sludge that answers to more and more stringent constraints on sanitary quality.

  20. Proportional counter end effects eliminator

    International Nuclear Information System (INIS)

    Meekins, J.F.

    1976-01-01

    An improved gas-filled proportional counter which includes a resistor network connected between the anode and cathode at the ends of the counter in order to eliminate ''end effects'' is described. 3 Claims, 2 Drawing Figures

  1. Defense Logistics Agency Revenue Eliminations

    National Research Council Canada - National Science Library

    1996-01-01

    The issue of revenue eliminations was identified during our work on the Defense Logistics Agency portion of the Audit of Revenue Accounts in the FY 1996 Financial Statements of the Defense Business Operations Fund...

  2. Elimination reactions. V. Steric effects in Hofmann elimination

    International Nuclear Information System (INIS)

    Coke, J.L.; Smith, G.D.; Britton, G.H. Jr.

    1975-01-01

    Earlier Hofmann elimination studies were extended, and the percent syn eliminations in several ring systems have been correlated using cis-d 1 and trans-d 1 models. The measurements of several syn and anti k/sub H//k/sub D/ kinetic isotope effects are reported. Results indicate that Hofmann elimination of N,N,N-trimethyl-3,3-dimethylcyclopentylammonium hydroxide goes by 97 percent syn mechanism to give 3,3-dimethylcyclopentene and by 70 + - 6 percent syn mechanism to give 4,4-dimethylcyclopentene. There appears to be severe steric interactions in the anti mechanism in the 3,3-dimethylcyclopentyl system. Results indicate that, for Hofmann pyrolysis of trimethylammonium hydroxides, cyclopentene is formed by a 39 +- 7 percent syn mechanism, cyclohexene is formed by a 2 + - 2 percent syn mechanism, and cycloheptene is formed by a 30 +- 2 percent syn mechanism. Steric effects on isotope effects and mechanisms are discussed. (U.S.)

  3. Cancer risks: Strategies for elimination

    International Nuclear Information System (INIS)

    Bannasch, P.

    1987-01-01

    This book deals with the possibilities for identifying and eliminating cancer risk factors. The current state of knowledge on the detection, assessment and elimination of chemical, physical (radiation), and biological (viruses) risk factors are comprehensively presented in 15 contributions. Chemical risk factors resulting from smoking and environmental contamination are given special attention. The coverage of cancer risks by radiation includes some of the consequences of the Chernobyl disaster. Finally, the discussion of the possible risks that certain viruses hold for cancer in man is intended to further the development of vaccinations against these viral infections. The information is directed not only at specialists, but also at a wider interested audience. Its primary aim is to convey established findings that are already being used for cancer prevention. Furthermore, the book aims to promote more intense research in the field of primary cancer prevention. Contents: General aspects; chemical carcinogens: Risk assessment; chemical carcinogens: Primary prevention; physical carcinogens - Oncogenic viruses and subject index

  4. How To Eliminate Narcissism Overnight

    Science.gov (United States)

    2011-01-01

    The Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition appears likely to eliminate the diagnosis of narcissistic personality disorder. There are significant problems with the discriminant validity of the current narcissistic personality disorder critiera set; furthermore, the Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition's narrow focus on “grandiosity” probably contributes to the wide disparity between low narcissistic personality disorder prevalence rates in epidemiological studies and high rates of narcissistic personality disorder in clinical practice. Nevertheless, the best course of action may be to refine the narcissistic personality disorder criteria, followed by careful field testing and a search for biomarkers, rather than wholesale elimination of the narcissistic personality disorder category. The construct of “malignant narcissism” is also worthy of more intense empirical investigation. PMID:21468294

  5. Challenges beyond elimination in leprosy.

    Science.gov (United States)

    Naaz, Farah; Mohanty, Partha Sarathi; Bansal, Avi Kumar; Kumar, Dilip; Gupta, Umesh Datta

    2017-01-01

    Every year >200,000 new leprosy cases are registered globally. This number has been fairly stable over the past 8 years. The World Health Organization has set a target to interrupt the transmission of leprosy globally by 2020. It is important, in terms of global action and research activities, to consider the eventuality of multidrug therapy (MDT) resistance developing. It is necessary to measure disease burden comprehensively, and contact-centered preventive interventions should be part of a global elimination strategy. Drug resistance is the reduction in effectiveness of a drug such as an antimicrobial or an antineoplastic in curing a disease or condition. MDT has proven to be a powerful tool in the control of leprosy, especially when patients report early and start prompt treatment. Adherence to and its successful completion is equally important. This paper has reviewed the current state of leprosy worldwide and discussed the challenges and also emphasizes the challenge beyond the elimination in leprosy.

  6. Violin-Related HCI

    DEFF Research Database (Denmark)

    Overholt, Daniel

    2011-01-01

    is simultaneously what makes acoustic instruments so challenging to play, what makes them interesting to play for long periods of time, and what makes overcoming that difficulty so worthwhile to both performers and listeners. Such an ability to capture human complexity, intelligence, and emotion through live...

  7. The violin heart.

    Science.gov (United States)

    Ker, James

    2010-07-20

    Left ventricular false tendons are thin, fibromuscular structures which traverse the left ventricular cavity. They are thought to be intracavitary radiations of the bundle of His. Usually these tendons span between the interventricular septum and the lateral wall or a papillary muscle. They have been known to be a source of innocent and musical murmurs.In this case report a peculiar left ventricular false tendon is shown-one extending between the two papillary muscles, giving the appearance of a musical note. During ventricular diastole the tendon is pulled taut between the two heads of the papillary muscles and during ventricular systole the tendon relaxes. The echocardiographic characteristics and possible long term implications are discussed.

  8. Large Blast and Thermal Simulator Reflected Wave Eliminator Study

    Science.gov (United States)

    1990-03-01

    it delays the passage of this wave through the test section until after the test is complete. The required length of extra duct depends on the strength...tube axis, which acts like an additional contraction effect since Se = Sj/[Cqsin(aj)]. Tii extra area is illustrated best by plotting (Se-Ae)/Ac versus...34Simulation de Choc et de Soaffie. Comimpensateur d’Ondes de Detente de Bouche pour tube a Choc de 2400 mm de diametre de Veine. Description, Compte- Renda

  9. A step-wise steerable source of illumination for low-noise "Violin-Mode" shadow sensors, intended for use in interferometric gravitational wave detectors

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.

    2016-01-01

    A steerable low-noise source of illumination is described for shadow-sensors having a displacement sensitivity of ˜100 pm (rms)/√Hz, at 500 Hz, over a measuring span of at least ±0.5 mm. These sensors were designed to detect lateral "Violin-Mode" resonances in the highly tensioned fused-silica suspension fibres of the test-masses/mirrors for the Advanced Laser Interferometer Gravitational Wave Observatory gravitational wave detectors. The shadow sensors—one intended for each of the four fibres in a suspension—comprised a source of Near InfraRed (NIR) radiation (emitter) and a differential shadow-displacement sensor (detector), these bracketing the fibre under test. The suspension fibres themselves were approximately 600 mm long by 0.4 mm in diameter, and when illuminated from the side, they cast narrow, vertical, shadows onto their respective detectors—these being located at an effective distance of 50 fibre diameters behind the axes of the fibres themselves. The emitter described here was designed to compensate for a significant degree of mechanical drift or creep over time in the mean position of its suspension fibre. This was achieved by employing five adjacent columns of 8 × miniature NIR LEDs (Light Emitting Diodes, λ = 890 nm), with one column being activated at a time. When used in conjunction with a "reverse Galilean" telescope, the LED sources allowed the collimated beam from the emitter to be steered azimuthally in fine angular increments (0.65°), causing the fibre's shadow to move laterally, in a step-wise manner, across the plane of its facing detector. Each step in shadow position was approximately 0.23 mm in size, and this allowed the fibre's shadow to be re-centred, so as to bridge once again both elements of its photodiode detector—even if the fibre was off-centred by as much as ±0.5 mm. Re-centring allowed Violin-Mode vibrations of the fibre to be sensed once again as differential AC photocurrents, these flowing in anti-phase in the

  10. A step-wise steerable source of illumination for low-noise “Violin-Mode” shadow sensors, intended for use in interferometric gravitational wave detectors

    International Nuclear Information System (INIS)

    Lockerbie, N. A.; Tokmakov, K. V.

    2016-01-01

    A steerable low-noise source of illumination is described for shadow-sensors having a displacement sensitivity of ∼100 pm (rms)/√Hz, at 500 Hz, over a measuring span of at least ±0.5 mm. These sensors were designed to detect lateral “Violin-Mode” resonances in the highly tensioned fused-silica suspension fibres of the test-masses/mirrors for the Advanced Laser Interferometer Gravitational Wave Observatory gravitational wave detectors. The shadow sensors—one intended for each of the four fibres in a suspension—comprised a source of Near InfraRed (NIR) radiation (emitter) and a differential shadow-displacement sensor (detector), these bracketing the fibre under test. The suspension fibres themselves were approximately 600 mm long by 0.4 mm in diameter, and when illuminated from the side, they cast narrow, vertical, shadows onto their respective detectors—these being located at an effective distance of 50 fibre diameters behind the axes of the fibres themselves. The emitter described here was designed to compensate for a significant degree of mechanical drift or creep over time in the mean position of its suspension fibre. This was achieved by employing five adjacent columns of 8  × miniature NIR LEDs (Light Emitting Diodes, λ = 890 nm), with one column being activated at a time. When used in conjunction with a “reverse Galilean” telescope, the LED sources allowed the collimated beam from the emitter to be steered azimuthally in fine angular increments (0.65°), causing the fibre’s shadow to move laterally, in a step-wise manner, across the plane of its facing detector. Each step in shadow position was approximately 0.23 mm in size, and this allowed the fibre’s shadow to be re-centred, so as to bridge once again both elements of its photodiode detector—even if the fibre was off-centred by as much as ±0.5 mm. Re-centring allowed Violin-Mode vibrations of the fibre to be sensed once again as differential AC photocurrents, these flowing in

  11. A step-wise steerable source of illumination for low-noise “Violin-Mode” shadow sensors, intended for use in interferometric gravitational wave detectors

    Energy Technology Data Exchange (ETDEWEB)

    Lockerbie, N. A.; Tokmakov, K. V. [SUPA (Scottish Universities Physics Alliance), Department of Physics, University of Strathclyde, 107 Rottenrow, Glasgow G4 0NG (United Kingdom)

    2016-01-15

    A steerable low-noise source of illumination is described for shadow-sensors having a displacement sensitivity of ∼100 pm (rms)/√Hz, at 500 Hz, over a measuring span of at least ±0.5 mm. These sensors were designed to detect lateral “Violin-Mode” resonances in the highly tensioned fused-silica suspension fibres of the test-masses/mirrors for the Advanced Laser Interferometer Gravitational Wave Observatory gravitational wave detectors. The shadow sensors—one intended for each of the four fibres in a suspension—comprised a source of Near InfraRed (NIR) radiation (emitter) and a differential shadow-displacement sensor (detector), these bracketing the fibre under test. The suspension fibres themselves were approximately 600 mm long by 0.4 mm in diameter, and when illuminated from the side, they cast narrow, vertical, shadows onto their respective detectors—these being located at an effective distance of 50 fibre diameters behind the axes of the fibres themselves. The emitter described here was designed to compensate for a significant degree of mechanical drift or creep over time in the mean position of its suspension fibre. This was achieved by employing five adjacent columns of 8  × miniature NIR LEDs (Light Emitting Diodes, λ = 890 nm), with one column being activated at a time. When used in conjunction with a “reverse Galilean” telescope, the LED sources allowed the collimated beam from the emitter to be steered azimuthally in fine angular increments (0.65°), causing the fibre’s shadow to move laterally, in a step-wise manner, across the plane of its facing detector. Each step in shadow position was approximately 0.23 mm in size, and this allowed the fibre’s shadow to be re-centred, so as to bridge once again both elements of its photodiode detector—even if the fibre was off-centred by as much as ±0.5 mm. Re-centring allowed Violin-Mode vibrations of the fibre to be sensed once again as differential AC photocurrents, these flowing in

  12. Eliminating US hospital medical errors.

    Science.gov (United States)

    Kumar, Sameer; Steinebach, Marc

    2008-01-01

    Healthcare costs in the USA have continued to rise steadily since the 1980s. Medical errors are one of the major causes of deaths and injuries of thousands of patients every year, contributing to soaring healthcare costs. The purpose of this study is to examine what has been done to deal with the medical-error problem in the last two decades and present a closed-loop mistake-proof operation system for surgery processes that would likely eliminate preventable medical errors. The design method used is a combination of creating a service blueprint, implementing the six sigma DMAIC cycle, developing cause-and-effect diagrams as well as devising poka-yokes in order to develop a robust surgery operation process for a typical US hospital. In the improve phase of the six sigma DMAIC cycle, a number of poka-yoke techniques are introduced to prevent typical medical errors (identified through cause-and-effect diagrams) that may occur in surgery operation processes in US hospitals. It is the authors' assertion that implementing the new service blueprint along with the poka-yokes, will likely result in the current medical error rate to significantly improve to the six-sigma level. Additionally, designing as many redundancies as possible in the delivery of care will help reduce medical errors. Primary healthcare providers should strongly consider investing in adequate doctor and nurse staffing, and improving their education related to the quality of service delivery to minimize clinical errors. This will lead to an increase in higher fixed costs, especially in the shorter time frame. This paper focuses additional attention needed to make a sound technical and business case for implementing six sigma tools to eliminate medical errors that will enable hospital managers to increase their hospital's profitability in the long run and also ensure patient safety.

  13. Structural and optical properties of wood and wood finishes studied using optical coherence tomography: application to an 18th century Italian violin.

    Science.gov (United States)

    Latour, Gaël; Echard, Jean-Philippe; Soulier, Balthazar; Emond, Isabelle; Vaiedelich, Stéphane; Elias, Mady

    2009-11-20

    Optical coherence tomography (OCT) is especially attractive for the study of cultural heritage artifacts because it is noninvasive and nondestructive. We have developed an original full-field time-domain OCT system dedicated to the investigation of varnished and painted artifacts: an interferometric Mirau objective allows one to perform the scan without moving the works of art. The axial and transverse high resolution (respectively, 1.5 and 1 microm) are well adapted to the detection of the investigated structures (pigment grains, wood fibers, etc.). The illumination spectrum is in the visible range (centered at 630 nm, 150 nm wide) to potentially allow us to perform spectroscopic OCT on pigment particles. The examination of wood samples coated with a traditional finish, demonstrates the ability of the system to detect particles, characterize layers thickness, and image the three-dimensional wood structures below the varnishes. OCT has finally been applied to study in situ the coated wood surface of an 18th century Italian violin and provides important information for its conservation treatment.

  14. A low-noise transimpedance amplifier for the detection of "Violin-Mode" resonances in advanced Laser Interferometer Gravitational wave Observatory suspensions

    Science.gov (United States)

    Lockerbie, N. A.; Tokmakov, K. V.

    2014-11-01

    This paper describes the design and performance of an extremely low-noise differential transimpedance amplifier, which takes its two inputs from separate photodiodes. The amplifier was planned to serve as the front-end electronics for a highly sensitive shadow-displacement sensing system, aimed at detecting very low-level "Violin-Mode" (VM) oscillations in 0.4 mm diameter by 600 mm long fused-silica suspension fibres. Four such highly tensioned fibres support the 40 kg test-masses/mirrors of the Advanced Laser Interferometer Gravitational wave Observatory interferometers. This novel design of amplifier incorporates features which prevent "noise-gain peaking" arising from large area photodiode (and cable) capacitances, and which also usefully separate the DC and AC photocurrents coming from the photodiodes. In consequence, the differential amplifier was able to generate straightforwardly two DC outputs, one per photodiode, as well as a single high-gain output for monitoring the VM oscillations—this output being derived from the difference of the photodiodes' two, naturally anti-phase, AC photocurrents. Following a displacement calibration, the amplifier's final VM signal output was found to have an AC displacement responsivity at 500 Hz of (9.43 ± 1.20) MV(rms) m-1(rms), and, therefore, a shot-noise limited sensitivity to such AC shadow- (i.e., fibre-) displacements of (69 ± 13) picometres/√Hz at this frequency, over a measuring span of ±0.1 mm.

  15. A low-noise transimpedance amplifier for the detection of “Violin-Mode” resonances in advanced Laser Interferometer Gravitational wave Observatory suspensions

    International Nuclear Information System (INIS)

    Lockerbie, N. A.; Tokmakov, K. V.

    2014-01-01

    This paper describes the design and performance of an extremely low-noise differential transimpedance amplifier, which takes its two inputs from separate photodiodes. The amplifier was planned to serve as the front-end electronics for a highly sensitive shadow-displacement sensing system, aimed at detecting very low-level “Violin-Mode” (VM) oscillations in 0.4 mm diameter by 600 mm long fused-silica suspension fibres. Four such highly tensioned fibres support the 40 kg test-masses/mirrors of the Advanced Laser Interferometer Gravitational wave Observatory interferometers. This novel design of amplifier incorporates features which prevent “noise-gain peaking” arising from large area photodiode (and cable) capacitances, and which also usefully separate the DC and AC photocurrents coming from the photodiodes. In consequence, the differential amplifier was able to generate straightforwardly two DC outputs, one per photodiode, as well as a single high-gain output for monitoring the VM oscillations—this output being derived from the difference of the photodiodes’ two, naturally anti-phase, AC photocurrents. Following a displacement calibration, the amplifier's final VM signal output was found to have an AC displacement responsivity at 500 Hz of (9.43 ± 1.20) MV(rms) m −1 (rms), and, therefore, a shot-noise limited sensitivity to such AC shadow- (i.e., fibre-) displacements of (69 ± 13) picometres/√Hz at this frequency, over a measuring span of ±0.1 mm

  16. A low-noise transimpedance amplifier for the detection of "Violin-Mode" resonances in Advanced Laser Interferometer Gravitational wave Observatory suspensions.

    Science.gov (United States)

    Lockerbie, N A; Tokmakov, K V

    2014-11-01

    This paper describes the design and performance of an extremely low-noise differential transimpedance amplifier, which takes its two inputs from separate photodiodes. The amplifier was planned to serve as the front-end electronics for a highly sensitive shadow-displacement sensing system, aimed at detecting very low-level "Violin-Mode" (VM) oscillations in 0.4 mm diameter by 600 mm long fused-silica suspension fibres. Four such highly tensioned fibres support the 40 kg test-masses/mirrors of the Advanced Laser Interferometer Gravitational wave Observatory interferometers. This novel design of amplifier incorporates features which prevent "noise-gain peaking" arising from large area photodiode (and cable) capacitances, and which also usefully separate the DC and AC photocurrents coming from the photodiodes. In consequence, the differential amplifier was able to generate straightforwardly two DC outputs, one per photodiode, as well as a single high-gain output for monitoring the VM oscillations-this output being derived from the difference of the photodiodes' two, naturally anti-phase, AC photocurrents. Following a displacement calibration, the amplifier's final VM signal output was found to have an AC displacement responsivity at 500 Hz of (9.43 ± 1.20) MV(rms) m(-1)(rms), and, therefore, a shot-noise limited sensitivity to such AC shadow- (i.e., fibre-) displacements of (69 ± 13) picometres/√Hz at this frequency, over a measuring span of ±0.1 mm.

  17. Elimination of Onchocerciasis from Mexico

    Science.gov (United States)

    Rodríguez-Pérez, Mario A.; Fernández-Santos, Nadia A.; Orozco-Algarra, María E.; Rodríguez-Atanacio, José A.; Domínguez-Vázquez, Alfredo; Rodríguez-Morales, Kristel B.; Real-Najarro, Olga; Prado-Velasco, Francisco G.; Cupp, Eddie W.; Richards, Frank O.; Hassan, Hassan K.; González-Roldán, Jesús F.; Kuri-Morales, Pablo A.; Unnasch, Thomas R.

    2015-01-01

    Background Mexico is one of the six countries formerly endemic for onchocerciasis in Latin America. Transmission has been interrupted in the three endemic foci of that country and mass drug distribution has ceased. Three years after mass drug distribution ended, post-treatment surveillance (PTS) surveys were undertaken which employed entomological indicators to check for transmission recrudescence. Methodology/Principal findings In-depth entomologic assessments were performed in 18 communities in the three endemic foci of Mexico. None of the 108,212 Simulium ochraceum s.l. collected from the three foci were found to contain parasite DNA when tested by polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA), resulting in a maximum upper bound of the 95% confidence interval (95%-ULCI) of the infective rate in the vectors of 0.035/2,000 flies examined. This is an order of magnitude below the threshold of a 95%-ULCI of less than one infective fly per 2,000 flies tested, the current entomological criterion for interruption of transmission developed by the international community. The point estimate of seasonal transmission potential (STP) was zero, and the upper bound of the 95% confidence interval for the STP ranged from 1.2 to 1.7 L3/person/season in the different foci. This value is below all previous estimates for the minimum transmission potential required to maintain the parasite population. Conclusions/Significance The results from the in-depth entomological post treatment surveillance surveys strongly suggest that transmission has not resumed in the three foci of Mexico during the three years since the last distribution of ivermectin occurred; it was concluded that transmission remains undetectable without intervention, and Onchocerca volvulus has been eliminated from Mexico. PMID:26161558

  18. Elimination of Onchocerciasis from Mexico.

    Directory of Open Access Journals (Sweden)

    Mario A Rodríguez-Pérez

    Full Text Available Mexico is one of the six countries formerly endemic for onchocerciasis in Latin America. Transmission has been interrupted in the three endemic foci of that country and mass drug distribution has ceased. Three years after mass drug distribution ended, post-treatment surveillance (PTS surveys were undertaken which employed entomological indicators to check for transmission recrudescence.In-depth entomologic assessments were performed in 18 communities in the three endemic foci of Mexico. None of the 108,212 Simulium ochraceum s.l. collected from the three foci were found to contain parasite DNA when tested by polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA, resulting in a maximum upper bound of the 95% confidence interval (95%-ULCI of the infective rate in the vectors of 0.035/2,000 flies examined. This is an order of magnitude below the threshold of a 95%-ULCI of less than one infective fly per 2,000 flies tested, the current entomological criterion for interruption of transmission developed by the international community. The point estimate of seasonal transmission potential (STP was zero, and the upper bound of the 95% confidence interval for the STP ranged from 1.2 to 1.7 L3/person/season in the different foci. This value is below all previous estimates for the minimum transmission potential required to maintain the parasite population.The results from the in-depth entomological post treatment surveillance surveys strongly suggest that transmission has not resumed in the three foci of Mexico during the three years since the last distribution of ivermectin occurred; it was concluded that transmission remains undetectable without intervention, and Onchocerca volvulus has been eliminated from Mexico.

  19. Quasi-static displacement calibration system for a “Violin-Mode” shadow-sensor intended for Gravitational Wave detector suspensions

    International Nuclear Information System (INIS)

    Lockerbie, N. A.; Tokmakov, K. V.

    2014-01-01

    This paper describes the design of, and results from, a calibration system for optical linear displacement (shadow) sensors. The shadow sensors were designed to detect “Violin-Mode” (VM) resonances in the 0.4 mm diameter silica fibre suspensions of the test masses/mirrors of Advanced Laser Interferometer Gravitational Wave Observatory gravitational wave interferometers. Each sensor illuminated the fibre under test, so as to cast its narrow shadow onto a “synthesized split photodiode” detector, the shadow falling over adjacent edges of the paired photodiodes. The apparatus described here translated a vertically orientated silica test fibre horizontally through a collimated Near InfraRed illuminating beam, whilst simultaneously capturing the separate DC “shadow notch” outputs from each of the paired split photodiode detectors. As the ratio of AC to DC photocurrent sensitivities to displacement was known, a calibration of the DC response to quasi-static shadow displacement allowed the required AC sensitivity to vibrational displacement to be found. Special techniques are described for generating the required constant scan rate for the test fibre using a DC motor-driven stage, for removing “jitter” at such low translation rates from a linear magnetic encoder, and so for capturing the two shadow-notch signals at each micrometre of the test fibre's travel. Calibration, across the four detectors of this work, gave a vibrational responsivity in voltage terms of (9.45 ± 1.20) MV (rms)/m, yielding a VM displacement sensitivity of (69 ± 13) pm (rms)/√Hz, at 500 Hz, over the required measuring span of ±0.1 mm

  20. Quasi-static displacement calibration system for a “Violin-Mode” shadow-sensor intended for Gravitational Wave detector suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Lockerbie, N. A.; Tokmakov, K. V. [SUPA (Scottish Universities Physics Alliance), Department of Physics, University of Strathclyde, 107 Rottenrow, Glasgow G4 0NG (United Kingdom)

    2014-10-15

    This paper describes the design of, and results from, a calibration system for optical linear displacement (shadow) sensors. The shadow sensors were designed to detect “Violin-Mode” (VM) resonances in the 0.4 mm diameter silica fibre suspensions of the test masses/mirrors of Advanced Laser Interferometer Gravitational Wave Observatory gravitational wave interferometers. Each sensor illuminated the fibre under test, so as to cast its narrow shadow onto a “synthesized split photodiode” detector, the shadow falling over adjacent edges of the paired photodiodes. The apparatus described here translated a vertically orientated silica test fibre horizontally through a collimated Near InfraRed illuminating beam, whilst simultaneously capturing the separate DC “shadow notch” outputs from each of the paired split photodiode detectors. As the ratio of AC to DC photocurrent sensitivities to displacement was known, a calibration of the DC response to quasi-static shadow displacement allowed the required AC sensitivity to vibrational displacement to be found. Special techniques are described for generating the required constant scan rate for the test fibre using a DC motor-driven stage, for removing “jitter” at such low translation rates from a linear magnetic encoder, and so for capturing the two shadow-notch signals at each micrometre of the test fibre's travel. Calibration, across the four detectors of this work, gave a vibrational responsivity in voltage terms of (9.45 ± 1.20) MV (rms)/m, yielding a VM displacement sensitivity of (69 ± 13) pm (rms)/√Hz, at 500 Hz, over the required measuring span of ±0.1 mm.

  1. A low-noise transimpedance amplifier for the detection of “Violin-Mode” resonances in advanced Laser Interferometer Gravitational wave Observatory suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Lockerbie, N. A.; Tokmakov, K. V. [SUPA (Scottish Universities Physics Alliance) Department of Physics, University of Strathclyde, 107 Rottenrow, Glasgow G4 0NG (United Kingdom)

    2014-11-15

    This paper describes the design and performance of an extremely low-noise differential transimpedance amplifier, which takes its two inputs from separate photodiodes. The amplifier was planned to serve as the front-end electronics for a highly sensitive shadow-displacement sensing system, aimed at detecting very low-level “Violin-Mode” (VM) oscillations in 0.4 mm diameter by 600 mm long fused-silica suspension fibres. Four such highly tensioned fibres support the 40 kg test-masses/mirrors of the Advanced Laser Interferometer Gravitational wave Observatory interferometers. This novel design of amplifier incorporates features which prevent “noise-gain peaking” arising from large area photodiode (and cable) capacitances, and which also usefully separate the DC and AC photocurrents coming from the photodiodes. In consequence, the differential amplifier was able to generate straightforwardly two DC outputs, one per photodiode, as well as a single high-gain output for monitoring the VM oscillations—this output being derived from the difference of the photodiodes’ two, naturally anti-phase, AC photocurrents. Following a displacement calibration, the amplifier's final VM signal output was found to have an AC displacement responsivity at 500 Hz of (9.43 ± 1.20) MV(rms) m{sup −1}(rms), and, therefore, a shot-noise limited sensitivity to such AC shadow- (i.e., fibre-) displacements of (69 ± 13) picometres/√Hz at this frequency, over a measuring span of ±0.1 mm.

  2. Elimination of Ideas and Professional Socialisation

    DEFF Research Database (Denmark)

    Gravengaard, Gitte; Rimestad, Lene

    2012-01-01

    . Our aim is to study how this building of expertise takes place at meetings with a particular focus on the decision-making process concerning ideas for new news stories. In order to do this, we perform linguistic analysis of news production practices, as we investigate how the journalists' ideas...... for potential news stories are eliminated by the editor at the daily newsroom meetings. The elimination of ideas for news stories are not just eliminations; they are also corrections of culturally undesirable behaviour producing and reproducing the proper perception of an important object of knowledge...

  3. Cut elimination in multifocused linear logic

    DEFF Research Database (Denmark)

    Guenot, Nicolas; Brock-Nannestad, Taus

    2015-01-01

    We study cut elimination for a multifocused variant of full linear logic in the sequent calculus. The multifocused normal form of proofs yields problems that do not appear in a standard focused system, related to the constraints in grouping rule instances in focusing phases. We show that cut...... elimination can be performed in a sensible way even though the proof requires some specific lemmas to deal with multifocusing phases, and discuss the difficulties arising with cut elimination when considering normal forms of proofs in linear logic....

  4. TOWARDS THE ELIMINATION OF PREVENTABLE DISEASES

    Directory of Open Access Journals (Sweden)

    O. V. Shamsheva

    2013-01-01

    Full Text Available The article presents incidence rates of major vaccine-preventable diseases in the world and the Russian Federation and cites mitigation measures that, in the end, must lead to the elimination of the diseases. 

  5. Thermal Cameras and Applications

    DEFF Research Database (Denmark)

    Gade, Rikke; Moeslund, Thomas B.

    2014-01-01

    Thermal cameras are passive sensors that capture the infrared radiation emitted by all objects with a temperature above absolute zero. This type of camera was originally developed as a surveillance and night vision tool for the military, but recently the price has dropped, significantly opening up...... a broader field of applications. Deploying this type of sensor in vision systems eliminates the illumination problems of normal greyscale and RGB cameras. This survey provides an overview of the current applications of thermal cameras. Applications include animals, agriculture, buildings, gas detection......, industrial, and military applications, as well as detection, tracking, and recognition of humans. Moreover, this survey describes the nature of thermal radiation and the technology of thermal cameras....

  6. Martian Atmospheric Pressure Static Charge Elimination Tool

    Science.gov (United States)

    Johansen, Michael R.

    2014-01-01

    A Martian pressure static charge elimination tool is currently in development in the Electrostatics and Surface Physics Laboratory (ESPL) at NASA's Kennedy Space Center. In standard Earth atmosphere conditions, static charge can be neutralized from an insulating surface using air ionizers. These air ionizers generate ions through corona breakdown. The Martian atmosphere is 7 Torr of mostly carbon dioxide, which makes it inherently difficult to use similar methods as those used for standard atmosphere static elimination tools. An initial prototype has been developed to show feasibility of static charge elimination at low pressure, using corona discharge. A needle point and thin wire loop are used as the corona generating electrodes. A photo of the test apparatus is shown below. Positive and negative high voltage pulses are sent to the needle point. This creates positive and negative ions that can be used for static charge neutralization. In a preliminary test, a floating metal plate was charged to approximately 600 volts under Martian atmospheric conditions. The static elimination tool was enabled and the voltage on the metal plate dropped rapidly to -100 volts. This test data is displayed below. Optimization is necessary to improve the electrostatic balance of the static elimination tool.

  7. Body elimination attitude family resemblance in Kuwait.

    Science.gov (United States)

    Al-Fayez, Ghenaim; Awadalla, Abdelwahid; Arikawa, Hiroko; Templer, Donald I; Hutton, Shane

    2009-12-01

    The purpose of the present study was to determine the family resemblance of attitude toward body elimination in Kuwaiti participants. This study was conceptualized in the context of the theories of moral development, importance of cleanliness in the Muslim religion, cross-cultural differences in personal hygiene practices, previous research reporting an association between family attitudes and body elimination attitude, and health implications. The 24-item Likert-type format Body Elimination Attitude Scale-Revised was administered to 277 Kuwaiti high school students and 437 of their parents. Females scored higher, indicating greater disgust, than the males. Moreover, sons' body elimination attitude correlated more strongly with fathers' attitude (r = .85) than with that of the mothers (r = .64). Daughters' attitude was similarly associated with the fathers' (r = .89) and the mothers' attitude (r = .86). The high correlations were discussed within the context of Kuwait having a collectivistic culture with authoritarian parenting style. The higher adolescent correlations, and in particular the boys' correlation with fathers than with mothers, was explained in terms of the more dominant role of the Muslim father in the family. Public health and future research implications were suggested. A theoretical formulation was advanced in which "ideal" body elimination attitude is relative rather than absolute, and is a function of one's life circumstances, one's occupation, one's culture and subculture, and the society that one lives in.

  8. Method of eliminating gaseous hydrogen isotopes

    International Nuclear Information System (INIS)

    Nagakura, Masaaki; Imaizumi, Hideki; Suemori, Nobuo; Aizawa, Takashi; Naito, Taisei.

    1983-01-01

    Purpose: To prevent external diffusion of gaseous hydrogen isotopes such as tritium or the like upon occurrence of tritium leakage accident in a thermonuclear reactor by recovering to eliminate the isotopes rapidly and with safety. Method: Gases at the region of a reactor container where hydrogen isotopes might leak are sucked by a recycing pump, dehumidified in a dehumidifier and then recycled from a preheater through a catalytic oxidation reactor to a water absorption tower. In this structure, the dehumidifier is disposed at the upstream of the catalytic oxidation reactor to reduce the water content of the gases to be processed, whereby the eliminating efficiency for the gases to be processed can be maintained well even when the oxidation reactor is operated at a low temperature condition near the ambient temperature. This method is based on the fact that the oxidating reactivity of the catalyst can be improved significantly by eliminating the water content in the gases to be processed. (Yoshino, Y.)

  9. Ten years left to eliminate blinding trachoma

    Directory of Open Access Journals (Sweden)

    Haddad D.

    2010-09-01

    Full Text Available n 1997, the World Health Organization formed the Global Alliance to Eliminate Blinding Trachoma by 2020 (GET 2020, a coalition of governmental, non-governmental, research, and pharmaceutical partners. In 1998, the World Health Assembly urged member states to map blinding trachoma in endemic areas, implement the SAFE strategy (which stands for surgery for trichiasis, antibiotics, facial-cleanliness and environmental change, such as clean water and latrines and collaborate with the global alliance in its work to eliminate blinding trachoma.

  10. Recognizing, Confronting, and Eliminating Workplace Bullying.

    Science.gov (United States)

    Berry, Peggy Ann; Gillespie, Gordon L; Fisher, Bonnie S; Gormley, Denise K

    2016-07-01

    Workplace bullying (WPB) behaviors negatively affect nurse productivity, satisfaction, and retention, and hinder safe patient care. The purpose of this article is to define WPB, differentiate between incivility and WPB, and recommend actions to prevent WPB behaviors. Informed occupational and environmental health nurses and nurse leaders must recognize, confront, and eliminate WPB in their facilities and organizations. Recognizing, confronting, and eliminating WPB behaviors in health care is a crucial first step toward sustained improvements in patient care quality and the health and safety of health care employees. © 2016 The Author(s).

  11. Duplicate Record Elimination in Large Data Files.

    Science.gov (United States)

    1981-08-01

    UNCLASSIFIJED CSTR -445 NL LmEE~hhE - I1.0 . 111112----5 1.~4 __112 ___IL25_ 1.4 111111.6 EI24 COMPUTER SCIENCES DEPARTMENT oUniversity of Wisconsin...we propose a combinatorial model for the use in the analysis of algorithms for duplicate elimination. We contend that this model can serve as a...duplicates in a multiset of records, knowing the size of the multiset and the number of distinct records in it. 3. Algorithms for Duplicate Elimination

  12. Noise elimination algorithm for modal analysis

    Energy Technology Data Exchange (ETDEWEB)

    Bao, X. X., E-mail: baoxingxian@upc.edu.cn [Department of Naval Architecture and Ocean Engineering, China University of Petroleum (East China), Qingdao 266580 (China); Li, C. L. [Key Laboratory of Marine Geology and Environment, Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071 (China); Xiong, C. B. [The First Institute of Oceanography, State Oceanic Administration, Qingdao 266061 (China)

    2015-07-27

    Modal analysis is an ongoing interdisciplinary physical issue. Modal parameters estimation is applied to determine the dynamic characteristics of structures under vibration excitation. Modal analysis is more challenging for the measured vibration response signals are contaminated with noise. This study develops a mathematical algorithm of structured low rank approximation combined with the complex exponential method to estimate the modal parameters. Physical experiments using a steel cantilever beam with ten accelerometers mounted, excited by an impulse load, demonstrate that this method can significantly eliminate noise from measured signals and accurately identify the modal frequencies and damping ratios. This study provides a fundamental mechanism of noise elimination using structured low rank approximation in physical fields.

  13. Elimination of Hot Tears in Steel Castings by Means of Solidification Pattern Optimization

    DEFF Research Database (Denmark)

    Kotas, Petr; Tutum, Cem Celal; Thorborg, Jesper

    2012-01-01

    A methodology of how to exploit the Niyama criterion for the elimination of various defects such as centerline porosity, macrosegregation, and hot tearing in steel castings is presented. The tendency of forming centerline porosity is governed by the temperature distribution close to the end...... of the solidification interval, specifically by thermal gradients and cooling rates. The physics behind macrosegregation and hot tears indicate that these two defects also are dependent heavily on thermal gradients and pressure drop in the mushy zone. The objective of this work is to show that by optimizing...... the solidification pattern, i.e., establishing directional and progressive solidification with the help of the Niyama criterion, macrosegregation and hot tearing issues can be both minimized or eliminated entirely. An original casting layout was simulated using a transient three-dimensional (3-D) thermal fluid model...

  14. Taking Centrioles to the Elimination Round.

    Science.gov (United States)

    Schoborg, Todd A; Rusan, Nasser M

    2016-07-11

    Two recent papers published in The Journal of Cell Biology (Borrego-Pinto et al., 2016) and Science (Pimenta-Marques et al., 2016) have begun to shed light on the mechanism of centriole elimination during female oogenesis, highlighting a protective role for Polo kinase and the pericentriolar material. Published by Elsevier Inc.

  15. Elimination Problems in Infants and Children

    Science.gov (United States)

    ... inability to digest wheat (CELIAC DISEASE) or milk (LACTOSE INTOLERANCE) can cause these symptoms. Self CareEliminate foods that ... be an appropriate substitute for infants who have lactose intolerance. Start OverDiagnosisPain from HEMORRHOIDS or an ANAL FISSURE ...

  16. Eliminating Problems Caused by Multicollinearity: A Warning.

    Science.gov (United States)

    Kennedy, Peter E.

    1982-01-01

    Explains why an econometric practice introduced by J.C. Soper cannot eliminate the problems caused by multicollinearity. The author suggests that it can be a useful technique in that it forces researchers to pay more attention to the specifications of their models. (AM)

  17. Double elimination voltammetry of short oligonucleotides

    Czech Academy of Sciences Publication Activity Database

    Mikelová, R.; Trnková, L.; Jelen, František

    2007-01-01

    Roč. 19, č. 17 (2007), s. 1807-1814 ISSN 1040-0397 R&D Projects: GA AV ČR(CZ) IAA100040602 Institutional research plan: CEZ:AV0Z50040507; CEZ:AV0Z50040702 Keywords : adsorptive stripping voltammetry * elimination voltammetry * oligodeoxynucleotide Subject RIV: BO - Biophysics Impact factor: 2.949, year: 2007

  18. Strategy elimination in games with interaction structures

    NARCIS (Netherlands)

    Witzel, A.; Apt, K.R.; Zvesper, J.A.

    2009-01-01

    We study games in the presence of an interaction structure, which allows players to communicate their preferences, assuming that each player initially only knows his own preferences. We study the outcomes of iterated elimination of strictly dominated strategies (IESDS) that can be obtained in any

  19. [Application of thermosetting plastics to eliminate undercuts].

    Science.gov (United States)

    Bielawski, T

    1989-01-01

    The author proposes to utilize the properties of thermosetting plastics used in other fields to use them in prosthetics in order to eliminate undercuts. Application of extra equipment in claspograph in the form of studs of three dimension makes formation of undercuts' blockade easier improving the result of work at the same time.

  20. Challenges for malaria elimination in Brazil.

    Science.gov (United States)

    Ferreira, Marcelo U; Castro, Marcia C

    2016-05-20

    Brazil currently contributes 42 % of all malaria cases reported in the Latin America and the Caribbean, a region where major progress towards malaria elimination has been achieved in recent years. In 2014, malaria burden in Brazil (143,910 microscopically confirmed cases and 41 malaria-related deaths) has reached its lowest levels in 35 years, Plasmodium falciparum is highly focal, and the geographic boundary of transmission has considerably shrunk. Transmission in Brazil remains entrenched in the Amazon Basin, which accounts for 99.5 % of the country's malaria burden. This paper reviews major lessons learned from past and current malaria control policies in Brazil. A comprehensive discussion of the scientific and logistic challenges that may impact malaria elimination efforts in the country is presented in light of the launching of the Plan for Elimination of Malaria in Brazil in November 2015. Challenges for malaria elimination addressed include the high prevalence of symptomless and submicroscopic infections, emerging anti-malarial drug resistance in P. falciparum and Plasmodium vivax and the lack of safe anti-relapse drugs, the largely neglected burden of malaria in pregnancy, the need for better vector control strategies where Anopheles mosquitoes present a highly variable biting behaviour, human movement, the need for effective surveillance and tools to identify foci of infection in areas with low transmission, and the effects of environmental changes and climatic variability in transmission. Control actions launched in Brazil and results to come are likely to influence control programs in other countries in the Americas.

  1. Eliminating transducer distortion in acoustic measurements

    DEFF Research Database (Denmark)

    Agerkvist, Finn T.; Torras Rosell, Antoni; McWalter, Richard Ian

    2014-01-01

    This paper investigates the in uence of nonlinear components that contaminate the linear response of acoustic transducer, and presents a method for eliminating the in uence of nonlinearities in acoustic measurements. The method is evaluated on simulated as well as experimental data, and is shown...

  2. Visceral Leishmaniasis : Potential for Control and Elimination

    NARCIS (Netherlands)

    E.A. le Rutte (Epke)

    2018-01-01

    markdownabstractOver the past years there has been a steep increase in awareness of visceral leishmaniasis (VL); many large-scale interventions are being implemented and targets for control and elimination have been set. In this thesis the potential of reaching these targets will be explored. To

  3. Review: elimination of bacteriophages in whey and whey products

    Directory of Open Access Journals (Sweden)

    Zeynep eAtamer

    2013-07-01

    Full Text Available As the cheese market faces strong international competition, the optimization of production processes becomes more important for the economic success of dairy companies. In dairy productions, whey from former cheese batches is frequently re-used to increase the yield, to improve the texture and to increase the nutrient value of the final product. Recycling of whey cream and particulated whey proteins is also routinely performed. Most bacteriophages, however, survive pasteurization and may re-enter the cheese manufacturing process. There is a risk that phages multiply to high numbers during the production. Contamination of whey samples with bacteriophages may cause problems in cheese factories because whey separation often leads to aerosol-borne phages and thus contamination of the factory environment. Furthermore, whey cream or whey proteins used for recycling into cheese matrices may contain thermo-resistant phages. Drained cheese whey can be contaminated with phages as high as 109 phages per mL. When whey batches are concentrated, phage titers can increase significantly by a factor of 10 hindering a complete elimination of phages. To eliminate the risk of fermentation failure during recycling of whey, whey treatments assuring an efficient reduction of phages are indispensable. This review focuses on inactivation of phages in whey by thermal treatment, ultraviolet (UV light irradiation and membrane filtration. Inactivation by heat is the most common procedure. However, application of heat for inactivation of thermo-resistant phages in whey is restricted due to negative effects on the functional properties of native whey proteins. Therefore an alternative strategy applying combined treatments should be favoured - rather than heating the dairy product at extreme temperature/time combinations. By using membrane filtration or UV treatment in combination with thermal treatment, phage numbers in whey can be reduced sufficiently to prevent subsequent

  4. Review: elimination of bacteriophages in whey and whey products

    Science.gov (United States)

    Atamer, Zeynep; Samtlebe, Meike; Neve, Horst; J. Heller, Knut; Hinrichs, Joerg

    2013-01-01

    As the cheese market faces strong international competition, the optimization of production processes becomes more important for the economic success of dairy companies. In dairy productions, whey from former cheese batches is frequently re-used to increase the yield, to improve the texture and to increase the nutrient value of the final product. Recycling of whey cream and particulated whey proteins is also routinely performed. Most bacteriophages, however, survive pasteurization and may re-enter the cheese manufacturing process. There is a risk that phages multiply to high numbers during the production. Contamination of whey samples with bacteriophages may cause problems in cheese factories because whey separation often leads to aerosol-borne phages and thus contamination of the factory environment. Furthermore, whey cream or whey proteins used for recycling into cheese matrices may contain thermo-resistant phages. Drained cheese whey can be contaminated with phages as high as 109 phages mL-1. When whey batches are concentrated, phage titers can increase significantly by a factor of 10 hindering a complete elimination of phages. To eliminate the risk of fermentation failure during recycling of whey, whey treatments assuring an efficient reduction of phages are indispensable. This review focuses on inactivation of phages in whey by thermal treatment, ultraviolet (UV) light irradiation, and membrane filtration. Inactivation by heat is the most common procedure. However, application of heat for inactivation of thermo-resistant phages in whey is restricted due to negative effects on the functional properties of native whey proteins. Therefore an alternative strategy applying combined treatments should be favored – rather than heating the dairy product at extreme temperature/time combinations. By using membrane filtration or UV treatment in combination with thermal treatment, phage numbers in whey can be reduced sufficiently to prevent subsequent phage accumulations

  5. Possibilities of Sulphate Elimination from Mine Water

    Directory of Open Access Journals (Sweden)

    Heviánková Silvie

    2004-12-01

    Full Text Available The issue of „acid water“ (or AMD is well known in the world for some centuries. In the Eastern Slovakia, the most acid surface water occurs in the area of old mine Smolník, which is closed and submerged for 15 years. The submitted contribution deals with the sulphate-elimination from this locality. Recently, several methods of sulphate-elimination from the mine water are applied. The best-known methods are biological, physical-chemical and chemical precipitation. The method described in this contribution consists of chemical precipitation by sodium aluminate and calcium hydrate. Under application of this method very interesting results were obtained. The amount of SO42- anions decreased to almost zero-value, using optimal doses of the chemical reagents.

  6. McGuire snubber elimination program

    International Nuclear Information System (INIS)

    Cloud, R.L.; Leung, J.S.M.; Taylor, W.H.; Morgan, R.L. Jr.

    1993-01-01

    An engineering program has been initiated at McGuire Nuclear Stations 1 and 2 to eliminate all existing snubbers. The elimination is achieved by replacing existing snubbers with limit stop pipe supports. The program establishes plant-wide modification procedures for one-to-one substitution under the 10 CFR 50.59 requirement. Nuclear Regulatory Commission (NRC) acceptance is based on the results of both comparison analyses and the hardware implementation of sample piping systems at McGuire nuclear stations. Experimental results obtained on shake table testing and from the NRC sponsored HDR research program are also used to formulate the technical basis and design procedures for plant-wide implementation of the snubber replacement effort. The overall program plan is for nearly 3,000 snubbers to be replaced in phases consistent with the plant scheduled outages. Duke Power estimates the program, when completed, will maintain ALARA, improve reliability, and reduce plant operating costs

  7. Elimination of salmonella from animal glandular products.

    Science.gov (United States)

    De Fiebre, C W; Burck, K T; Feldman, D

    1969-03-01

    Methods for the elimination of salmonellae from selected powdered pharmaceuticals of animal glandular origin were studied. Terminal heat treatment under carefully controlled conditions was effective for pancreatin-a powder containing proteolytic, amylolytic, and lipolytic enzymes prepared from hog pancreas glands. Use of this method resulted in a significant reduction in the number of salmonella-positive batches and also reduced the testing procedures required to confirm the absence of viable salmonellae among the majority of samples tested. Powders such as stomach substance and thyroid, in which the biological activity is not enzyme in nature, were treated successfully with acidified organic solvents. Other methods were investigated but were not suitable because of a deleterious effect on the biological activity or physical properties of the product or an inability to effect salmonella elimination.

  8. Elimination of Salmonellae from Animal Glandular Products

    Science.gov (United States)

    De Fiebre, Conrad W.; Burck, Kenneth T.; Feldman, David

    1969-01-01

    Methods for the elimination of salmonellae from selected powdered pharmaceuticals of animal glandular origin were studied. Terminal heat treatment under carefully controlled conditions was effective for pancreatin—a powder containing proteolytic, amylolytic, and lipolytic enzymes prepared from hog pancreas glands. Use of this method resulted in a significant reduction in the number of salmonella-positive batches and also reduced the testing procedures required to confirm the absence of viable salmonellae among the majority of samples tested. Powders such as stomach substance and thyroid, in which the biological activity is not enzyme in nature, were treated successfully with acidified organic solvents. Other methods were investigated but were not suitable because of a deleterious effect on the biological activity or physical properties of the product or an inability to effect salmonella elimination. PMID:5780395

  9. Eliminative behaviour of dairy cows at pasture

    DEFF Research Database (Denmark)

    Whistance, Lindsay Kay; Sinclair, Liam A.; Arney, David Richard

    2011-01-01

    Walking whilst defaecating was most likely to occur when cows were simultaneously engaged in an ‘active’ state, such as going to drink or catching up with the herd. Overall, standing to defaecate and moving forward...... behaviour of 40 Holstein-Friesian cows was observed at pasture for6 heach day between morning and afternoon milking for a total of24 h. Lying (l), standing (s) and walking (w) behaviours were recorded pre, during and post-elimination. Sequences of 3–6 changes in these behaviours were recorded if expressed...... within 30 s of an eliminative event. Intentional, incidental or no avoidance of faeces was also recorded for each event. Activity, characterised as static (lying, grazing or loafing), or active (moving to a different area of field, going to drink and catching up with herd) was also recorded. Of the 437...

  10. Elimination of Plasmodium falciparum malaria in Tajikistan.

    Science.gov (United States)

    Kondrashin, Anatoly V; Sharipov, Azizullo S; Kadamov, Dilshod S; Karimov, Saifuddin S; Gasimov, Elkhan; Baranova, Alla M; Morozova, Lola F; Stepanova, Ekaterina V; Turbabina, Natalia A; Maksimova, Maria S; Morozov, Evgeny N

    2017-05-30

    Malaria was eliminated in Tajikistan by the beginning of the 1960s. However, sporadic introduced cases of malaria occurred subsequently probably as a result of transmission from infected mosquito Anopheles flying over river the Punj from the border areas of Afghanistan. During the 1970s and 1980s local outbreaks of malaria were reported in the southern districts bordering Afghanistan. The malaria situation dramatically changed during the 1990s following armed conflict and civil unrest in the newly independent Tajikistan, which paralyzed health services including the malaria control activities and a large-scale malaria epidemic occurred with more than 400,000 malaria cases. The malaria epidemic was contained by 1999 as a result of considerable financial input from the Government and the international community. Although Plasmodium falciparum constituted only about 5% of total malaria cases, reduction of its incidence was slower than that of Plasmodium vivax. To prevent increase in P. falciparum malaria both in terms of incidence and territory, a P. falciparum elimination programme in the Republic was launched in 200, jointly supported by the Government and the Global Fund for control of AIDS, tuberculosis and malaria. The main activities included the use of pyrethroids for the IRS with determined periodicity, deployment of mosquito nets, impregnated with insecticides, use of larvivorous fishes as a biological larvicide, implementation of small-scale environmental management, and use of personal protection methods by population under malaria risk. The malaria surveillance system was strengthened by the use of ACD, PCD, RCD and selective use of mass blood surveys. All detected cases were timely epidemiologically investigated and treated based on the results of laboratory diagnosis. As a result, by 2009, P. falciparum malaria was eliminated from all of Tajikistan, one year ahead of the originally targeted date. Elimination of P. falciparum also contributed towards

  11. An Elimination of Resonance in Electric Drives

    Directory of Open Access Journals (Sweden)

    Michal Malek

    2011-01-01

    Full Text Available Flexible couplings together with resonance phenomenon are present mainly in the field of servodrives where high accuracy and dynamic requirements are crucial. When dynamics doesn’t correlate with mechanical system design, unwanted frequencies in the system are exited. Sometimes we haven’t conditions (whether material or space to design mechanical system with resonant frequencies too high to be exited. In that case we must choose compensating methods which can eliminate these phenomenons. This paper is dedicated to them.

  12. Planning of elimination of emergency consequences

    Directory of Open Access Journals (Sweden)

    S. Kovalenko

    2015-05-01

    Full Text Available Introduction. The volume of useful information in the planning of elimination of emergency consequences process is reasonable to assess with calculatory problems and mathematical models. Materials and methods. The expert survey method is used to calculate quantitative values of probability and to determine the optimal solution before the information in condition is received. Results. It is determined that the quality of the solution of elimination emergency consequences depends primarily on the number of factors that are taken into account in particular circumstances of the situation; on the level of information readiness of control bodies to take decision to eliminate emergency consequences as soon as possible and to consider several options for achieving reasonableness and concreteness of a particular decision. The ratio between volume of useful information collected and processed during operation planning which is required for identifying optimal solution is calculated. This ratio allows to construct a graph of probability of identifying a solution in existing environment and probability value of identifying optimal solution before information in P*condition is obtained. This graph also shows the ratio volume of useful information collected and processed during operation planning and necessary volume of information for identifying optimal solution. Conclusion. The results of this research can be used for improving control bodies decisions to ensure safe working conditions for employees of food industry.

  13. Immune Interventions to Eliminate the HIV Reservoir.

    Science.gov (United States)

    Hsu, Denise C; Ananworanich, Jintanat

    2017-10-26

    Inducing HIV remission is a monumental challenge. A potential strategy is the "kick and kill" approach where latently infected cells are first activated to express viral proteins and then eliminated through cytopathic effects of HIV or immune-mediated killing. However, pre-existing immune responses to HIV cannot eradicate HIV infection due to the presence of escape variants, inadequate magnitude, and breadth of responses as well as immune exhaustion. The two major approaches to boost immune-mediated elimination of infected cells include enhancing cytotoxic T lymphocyte mediated killing and harnessing antibodies to eliminate HIV. Specific strategies include increasing the magnitude and breadth of T cell responses through therapeutic vaccinations, reversing the effects of T cell exhaustion using immune checkpoint inhibition, employing bispecific T cell targeting immunomodulatory proteins or dual-affinity re-targeting molecules to direct cytotoxic T lymphocytes to virus-expressing cells and broadly neutralizing antibody infusions. Methods to steer immune responses to tissue sites where latently infected cells are located need to be further explored. Ultimately, strategies to induce HIV remission must be tolerable, safe, and scalable in order to make a global impact.

  14. Comparing materials used in mist eliminators

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B.; Baleno, B.; Boles, G.L.; Telow, J. [Solvay Advanced Polyers (United States)

    2007-11-15

    Wet flue gas desulfurization (FGD) systems, or wet scrubbers, are notoriously capital - and maintenance-intensive. Mist eliminators are an integral part of most wet FGD systems. These are available in a variety of materials - polypropylene, fiberglass reinforced polymer (FRP), polysulfone and stainless steel. The article discusses the material properties, performance attributes and relative cost differences associated with each of these four materials. It describes the common problems with mist eliminators - fouling and corrosion. These can be minimised by routine cleaning and use of chemical additives to prevent deposition. An analysis was carried out to compare the four materials at APS Cholla power plant. As a result the facility is retrofitting its remaining wet scrubber towers in Unit 2 with mist eliminators constructed from polysulfone as each of the current ones of the existing polypropylene needs replacing. Polysulfone is cheaper to clean and components require replacing less frequently than polypropylene. Switching from stainless steel to polypropylene has proved advantageous on 22 wet scrubbers operated by PPL Montana. 5 figs. 2 tabs.

  15. Study on thermal wave based on the thermal mass theory

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The conservation equations for heat conduction are established based on the concept of thermal mass.We obtain a general heat conduction law which takes into account the spatial and temporal inertia of thermal mass.The general law introduces a damped thermal wave equation.It reduces to the well-known CV model when the spatial inertia of heat flux and temperature and the temporal inertia of temperature are neglected,which indicates that the CV model only considers the temporal inertia of heat flux.Numerical simulations on the propagation and superposition of thermal waves show that for small thermal perturbation the CV model agrees with the thermal wave equation based on the thermal mass theory.For larger thermal perturbation,however,the physically impossible phenomenon pre-dicted by CV model,i.e.the negative temperature induced by the thermal wave superposition,is eliminated by the general heat conduction law,which demonstrates that the present heat conduction law based on the thermal mass theory is more reasonable.

  16. Study on thermal wave based on the thermal mass theory

    Institute of Scientific and Technical Information of China (English)

    HU RuiFeng; CAO BingYang

    2009-01-01

    The conservation equations for heat conduction are established based on the concept of thermal mass. We obtain a general heat conduction law which takes into account the spatial and temporal inertia of thermal mass. The general law introduces a damped thermal wave equation. It reduces to the well-known CV model when the spatial inertia of heat flux and temperature and the temporal inertia of temperature are neglected, which indicates that the CV model only considers the temporal inertia of heat flux. Numerical simulations on the propagation and superposition of thermal waves show that for small thermal perturbation the CV model agrees with the thermal wave equation based on the thermal mass theory. For larger thermal perturbation, however, the physically impossible phenomenon pre-dicted by CV model, i.e. the negative temperature induced by the thermal wave superposition, is eliminated by the general heat conduction law, which demonstrates that the present heat conduction law based on the thermal mass theory is more reasonable.

  17. The global cost of eliminating avoidable blindness

    Directory of Open Access Journals (Sweden)

    Kirsten L Armstrong

    2012-01-01

    Full Text Available Aims : To complete an initial estimate of the global cost of eliminating avoidable blindness, including the investment required to build ongoing primary and secondary health care systems, as well as to eliminate the ′backlog′ of avoidable blindness. This analysis also seeks to understand and articulate where key data limitations lie. Materials and Methods : Data were collected in line with a global estimation approach, including separate costing frameworks for the primary and secondary care sectors, and the treatment of backlog. Results : The global direct health cost to eliminate avoidable blindness over a 10-year period from 2011 to 2020 is estimated at $632 billion per year (2009 US$. As countries already spend $592 billion per annum on eye health, this represents additional investment of $397.8 billion over 10 years, which is $40 billion per year or $5.80 per person for each year between 2010 and 2020. This is concentrated in high-income nations, which require 68% of the investment but comprise 16% of the world′s inhabitants. For all other regions, the additional investment required is $127 billion. Conclusions : This costing estimate has identified that low- and middle-income countries require less than half the additional investment compared with high-income nations. Low- and middle-income countries comprise the greater investment proportion in secondary care whereas high-income countries require the majority of investment into the primary sector. However, there is a need to improve sector data. Investment in better data will have positive flow-on effects for the eye health sector.

  18. Redundancy Elimination in DTN via ACK Mechanism

    Directory of Open Access Journals (Sweden)

    Xiqing Zhang

    2015-08-01

    Full Text Available The traditional routing protocols for delay tolerant networks (DTN usually take the strategy of spreading multiple copies of one message to the networks. When one copy reaches destination, the transmission of other copies not only waste the bandwidth but also deprive other messages of the opportunities for transmission. This paper brings up a mechanism to eliminate the redundant copies. By adding an acknowledge field to the packet header to delete redundant copies, it can degrade the network overhead while improve the delivery ratio. Simulation results confirm that the proposed method can improve the performance of epidemic and Spray and Wait routing protocol.

  19. Apparatus for eliminating electrodeposition of radioactive nuclide

    International Nuclear Information System (INIS)

    Inomata, Ichiro; Ishibe, Tadao; Matsunaga, Masaaki; Konuki, Ryoichi; Suzuki, Kazunori; Watanabe, Minoru; Tomoshige, Shozo; Kondo, Kozo.

    1990-01-01

    In a conventional device for eliminating by radioactive nuclides electrodeposition, a liquid containing radioactive nuclides is electrolyzed under a presence of non-radioactive heavy metals and removing radioactive nuclides by electrodepositing them together with the heavy metals. Two anode plates are opposed in an electrolysis vessel of this device. A plurality (4 to 6) of cathode plates are arranged between the anodes in parallel with them and the cathode surfaces opposed to the anodes are insulated. Further, such a plurality of cathode plates are grouped into respective units. Alternatively, the anode plate is made of platinum-plated titanium material and the cathode plate is made of stainless steel. In the thus constituted electrodeposition eliminating device, since the cathode surface directed to the anodes on both ends are insulated, all of electric current from the anode reach the core cathode after flowing around the cathodes at both ends. As a result, there is no substantial difference in the flowing length of the electrolyzing current to each of the cathodes and these is neither difference in the electrodeposition amount. The electrodeposited products are adhered uniformly and densely to the electrodes and, simultaneously, Co-60 and Mn-54, etc. are also electrodeposited. (I.S.)

  20. Processes and problems of ammonia elimination

    Energy Technology Data Exchange (ETDEWEB)

    Tippmer, K

    1974-01-01

    In many cases a conversion of ammonia in coke oven gases to ammonium sulfate (fertilizer) is not useful. It must then be eliminated by oxidation to nitrogen and water or catalytically to N2 and hydrogen. Several processes are available for this which are combined with the simultaneous removal of hydrogen sulfide. The absorption of NH3 with NH3 incineration with and without heat utilization, the NH3 absorption with catalytic cracking of NH3, H2S and NH3 scrubbing with NH3 incineration and production of sulfuric acid (78 or 96 percent), as well as H2S and NH3 scrubbing with catalytic cracking of NH3 and production of pure sulfur are discussed in great detail. A cost comparison of these methods is provided. Lowest investments are required for an NH3 scrubbing process with elimination of NH3 but without desulfurization. Expenditures for an NH3 scrubber with desulfurization of the coke oven gas to about 1.5 g H2S/cu m and NH3 incineration with production of 78 percent H2SO4 are lower than those for the production of 96 percent H2SO4. For the latter there is more demand, however. Desulfurization to about 0.7 g H2S/cu m is only slightly more expensive. The process producing sulfur in combination with an H2S oxidation method requires somewhat lower investment costs.

  1. Elimination of frequency noise from groundwater measurements

    International Nuclear Information System (INIS)

    Chien, Y.M.; Bryce, R.W.; Strait, S.R.; Yeatman, R.A.

    1986-04-01

    Groundwater response to atmospheric fluctuation can be effectively removed from downhole-pressure records using the systematic approach. The technique is not as successful for removal of earth tides, due to a probable discrepancy between the actual earth tide and the theoretical earth tide. The advantage of the systematic technique is that a causative relationship is established for each component of the pressure response removed. This concept of data reduction is easily understood and well accepted. The disadvantage is that a record of the stress causing the pressure fluctuation must be obtained. This may be done by monitoring or synthesizing the stress. Frequency analysis offers a simpler way to eliminate the undesirable hydrologic fluctuations from the downhole pressure. Frequency analysis may prove to be impractical if the fluctuations being removed have broadband characteristics. A combination of the two techniques, such as eliminating the atmospheric effect with the systematic method and the earth-tide fluctuations with the frequency method, is the most effective and efficient approach

  2. Herbivory eliminates fitness costs of mutualism exploiters.

    Science.gov (United States)

    Simonsen, Anna K; Stinchcombe, John R

    2014-04-01

    A common empirical observation in mutualistic interactions is the persistence of variation in partner quality and, in particular, the persistence of exploitative phenotypes. For mutualisms between hosts and symbionts, most mutualism theory assumes that exploiters always impose fitness costs on their host. We exposed legume hosts to mutualistic (nitrogen-fixing) and exploitative (non-nitrogen-fixing) symbiotic rhizobia in field conditions, and manipulated the presence or absence of insect herbivory to determine if the costly fitness effects of exploitative rhizobia are context-dependent. Exploitative rhizobia predictably reduced host fitness when herbivores were excluded. However, insects caused greater damage on hosts associating with mutualistic rhizobia, as a consequence of feeding preferences related to leaf nitrogen content, resulting in the elimination of fitness costs imposed on hosts by exploitative rhizobia. Our experiment shows that herbivory is potentially an important factor in influencing the evolutionary dynamic between legumes and rhizobia. Partner choice and host sanctioning are theoretically predicted to stabilize mutualisms by reducing the frequency of exploitative symbionts. We argue that herbivore pressure may actually weaken selection on choice and sanction mechanisms, thus providing one explanation of why host-based discrimination mechanisms may not be completely effective in eliminating nonbeneficial partners. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

  3. Cut Elimination, Identity Elimination, and Interpolation in Super-Belnap Logics

    Czech Academy of Sciences Publication Activity Database

    Přenosil, Adam

    2017-01-01

    Roč. 105, č. 6 (2017), s. 1255-1289 ISSN 0039-3215 R&D Projects: GA ČR GBP202/12/G061 EU Projects: European Commission(XE) 689176 - SYSMICS Institutional support: RVO:67985807 Keywords : Super-Belnap logic s * Dunn–Belnap logic * Logic of Paradox * Strong Kleene logic * Exactly True Logic * Gentzen calculus * Cut elimination * Identity elimination * Interpolation Subject RIV: BA - General Mathematics OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 0.589, year: 2016

  4. Thermal comfort

    CSIR Research Space (South Africa)

    Osburn, L

    2010-01-01

    Full Text Available Thermal comfort is influenced by environmental parameters as well as other influences including asymmetric heating and cooling conditions. Additionally, some aspects of thermal comfort may be exploited so as to enable a building to operate within a...

  5. For a convention for nuclear weapon elimination

    International Nuclear Information System (INIS)

    2008-03-01

    This document contains two texts linked with the project of an international convention for the elimination of nuclear weapons (the text of this project has been sent to the UN General Secretary and is part of an international campaign to abolish nuclear weapons, ICAN). These two texts are contributions presented in London at the Global Summit for a Nuclear Weapon-free World. The first one calls into question the deterrence principle and the idea of a nuclear weapon-based security. It calls for different forms of action to promote a nuclear weapon-free world. The second text stresses the role and the responsibility of states with nuclear weapons in nuclear disarmament and in the reinforcement of the nuclear non proliferation treaty (NPT)

  6. Lean for Government: Eliminating the Seven Wastes

    Science.gov (United States)

    Shepherd, Christena C.

    2012-01-01

    With shrinking budgets and a slow economy, it is becoming increasingly important for all government agencies to become more efficient. Citizens expect and deserve efficient and effective services from federal, state and local government agencies. One of the best methods to improve efficiency and eliminate waste is to institute the business process improvement methodologies known collectively as Lean; however, with reduced budgets, it may not be possible to train everyone in Lean or to engage the services of a trained consultant. It is possible, however, to raise awareness of the "Seven Wastes" of Lean in each employee, and encourage them to identify areas for improvement. Management commitment is vital to the success of these initiatives, and it is also important to develop the right metrics that will track the success of these changes.

  7. Adaptive elimination of synchronization in coupled oscillator

    Science.gov (United States)

    Zhou, Shijie; Ji, Peng; Zhou, Qing; Feng, Jianfeng; Kurths, Jürgen; Lin, Wei

    2017-08-01

    We present here an adaptive control scheme with a feedback delay to achieve elimination of synchronization in a large population of coupled and synchronized oscillators. We validate the feasibility of this scheme not only in the coupled Kuramoto’s oscillators with a unimodal or bimodal distribution of natural frequency, but also in two representative models of neuronal networks, namely, the FitzHugh-Nagumo spiking oscillators and the Hindmarsh-Rose bursting oscillators. More significantly, we analytically illustrate the feasibility of the proposed scheme with a feedback delay and reveal how the exact topological form of the bimodal natural frequency distribution influences the scheme performance. We anticipate that our developed scheme will deepen the understanding and refinement of those controllers, e.g. techniques of deep brain stimulation, which have been implemented in remedying some synchronization-induced mental disorders including Parkinson disease and epilepsy.

  8. Gaussian elimination is not optimal, revisited

    DEFF Research Database (Denmark)

    Macedo, Hugo Daniel

    2016-01-01

    We refactor the universal law for the tensor product to express matrix multiplication as the product . MN of two matrices . M and . N thus making possible to use such matrix product to encode and transform algorithms performing matrix multiplication using techniques from linear algebra. We explore...... the end results are equations involving matrix products, our exposition builds upon previous works on the category of matrices (and the related category of finite vector spaces) which we extend by showing: why the direct sum . (⊕,0) monoid is not closed, a biproduct encoding of Gaussian elimination...... such possibility and show two stepwise refinements transforming the composition . MN into the Naïve and Strassen's matrix multiplication algorithms. The inspection of the stepwise transformation of the composition of matrices . MN into the Naïve matrix multiplication algorithm evidences that the steps...

  9. RESULTS of the "ELIMINATING NOISE" campaign

    CERN Multimedia

    SC Unit

    2008-01-01

    From 4 to 6 August, CERN’s nurses conducted a screening campaign entitled "Eliminating noise". This campaign was especially aimed at young people exposed to noise during their leisure hours (playing in a band, listening to MP3 players, attending concerts, etc.). In all, 166 people attended the Infirmary, where they were able to receive personalised advice, documentation and, above all, a hearing test (audiogram). While the high attendance of people in the younger age category (18-30) was a success, their audiogram data were a cause for concern, with 24.5% showing abnormal results, hearing deficiencies which, we should remind you, are irreversible. It should be noted that such conditions are almost exclusively caused by noise exposure in a non-professional environment (leisure activities, music, etc.). This latest campaign confirms the harmful effects of noise on people’s hearing due to the absence or insufficiency of protective equipment during music-related activities; this further unde...

  10. RESULTS of the "ELIMINATING NOISE" campaign

    CERN Multimedia

    SC Unit

    2008-01-01

    From 4 to 6 August, CERN’s nurses conducted a screening campaign entitled "Eliminating noise". This campaign was especially aimed at young people exposed to noise during their leisure hours (playing in a band, listening to MP3 players, attending concerts, etc.). In all, 166 people attended the infirmary, where they were able to receive personalised advice, documentation and, above all, a hearing test (audiogram). While the high attendance of people in the younger age category (18-30) was a success, their audiogram data were a cause for concern, with 24.5% showing abnormal results, hearing deficiencies which, we should remind you, are irreversible. It should be noted that such conditions are almost exclusively caused by noise exposure in a non-professional environment (leisure activities, music, etc.). This latest campaign confirms the harmful effects of noise on people’s hearing due to the absence or insufficiency of protective equipment during music-related activities; this further unde...

  11. Adaptive elimination of synchronization in coupled oscillator

    International Nuclear Information System (INIS)

    Zhou, Shijie; Lin, Wei; Ji, Peng; Feng, Jianfeng; Zhou, Qing; Kurths, Jürgen

    2017-01-01

    We present here an adaptive control scheme with a feedback delay to achieve elimination of synchronization in a large population of coupled and synchronized oscillators. We validate the feasibility of this scheme not only in the coupled Kuramoto’s oscillators with a unimodal or bimodal distribution of natural frequency, but also in two representative models of neuronal networks, namely, the FitzHugh–Nagumo spiking oscillators and the Hindmarsh–Rose bursting oscillators. More significantly, we analytically illustrate the feasibility of the proposed scheme with a feedback delay and reveal how the exact topological form of the bimodal natural frequency distribution influences the scheme performance. We anticipate that our developed scheme will deepen the understanding and refinement of those controllers, e.g. techniques of deep brain stimulation, which have been implemented in remedying some synchronization-induced mental disorders including Parkinson disease and epilepsy. (paper)

  12. 76 FR 24802 - Eliminating the Decision Review Board

    Science.gov (United States)

    2011-05-03

    ... 0960-AG80 Eliminating the Decision Review Board AGENCY: Social Security Administration. ACTION: Final rules. SUMMARY: We are eliminating the Decision Review Board (DRB) portions of part 405 of our rules...-level process. DSI also eliminated review by the Appeals Council, the final step in our administrative...

  13. 77 FR 30871 - Implementing the Prison Rape Elimination Act

    Science.gov (United States)

    2012-05-23

    ...--Implementing the Prison Rape Elimination Act Proclamation 8823--Armed Forces Day, 2012 #0; #0; #0; Presidential... Prison Rape Elimination Act Memorandum for the Heads of Executive Departments and Agencies Sexual... Rape Elimination Act of 2003 (PREA) was enacted with bipartisan support and established a ``zero...

  14. On the Importance of Elimination Heuristics in Lazy Propagation

    DEFF Research Database (Denmark)

    Madsen, Anders Læsø; Butz, Cory J.

    2012-01-01

    elimination orders on-line. This paper considers the importance of elimination heuristics in LP when using Variable Elimination (VE) as the message and single marginal computation algorithm. It considers well-known cost measures for selecting the next variable to eliminate and a new cost measure....... The empirical evaluation examines dierent heuristics as well as sequences of cost measures, and was conducted on real-world and randomly generated Bayesian networks. The results show that for most cases performance is robust relative to the cost measure used and in some cases the elimination heuristic can have...

  15. Elimination of onchocerciasis from Colombia: first proof of concept of river blindness elimination in the world.

    Science.gov (United States)

    Nicholls, Rubén Santiago; Duque, Sofía; Olaya, Luz Adriana; López, Myriam Consuelo; Sánchez, Sol Beatriz; Morales, Alba Lucía; Palma, Gloria Inés

    2018-04-11

    Onchocerciasis is a chronic parasitic infection originally endemic in 13 discrete regional foci distributed among six countries of Latin America (Brazil, Colombia, Ecuador, Guatemala, Mexico and Venezuela). In Colombia, this disease was discovered in 1965 in the Pacific Coast of the country. The National Onchocerciasis Elimination Program was established in 1993 with the aim of eliminating disease morbidity and infection transmission. In 2013, the World Health Organization (WHO) verified Colombia as free of onchocerciasis, becoming the first country in the world to reach such a goal. This report provides the empirical evidence of the elimination of Onchocerca volvulus transmission by Simulium exiguum (s.l.) after 12 years of 6-monthly mass drug administration of Mectizan® (ivermectin) to all the eligible residents living in this endemic area. From 1996 onwards, a biannual community-based mass ivermectin administration programme was implemented, complemented by health education and community participation. In-depth parasitological, serological and entomological surveys were conducted periodically between 1998 and 2007 to evaluate the impact of ivermectin treatment according to the 2001 WHO guidelines. When the interruption of parasite transmission was demonstrated, the drug distribution ceased and a three-year post-treatment surveillance (PTS) period (2008-2010) was initiated. After 23 rounds of treatment, parasitological and ophthalmological assessments showed absence of microfilariae in skin and anterior chamber of the eyes. Serological tests proved lack of antibodies against O. volvulus in children under 10 years-old. A total of 10,500 S. exiguum flies tested by PCR had no L3 infection (infectivity rate = 0.0095%; 95% CI: 0.0029-0.049) during 2004, indicating interruption of parasite transmission. However, biannual ivermectin treatments continued until 2007 followed by a 3-year PTS period at the end of which 13,481 flies were analyzed and no infective flies were

  16. Polio elimination in Nigeria: A review.

    Science.gov (United States)

    Nasir, Usman Nakakana; Bandyopadhyay, Ananda Sankar; Montagnani, Francesca; Akite, Jacqueline Elaine; Mungu, Etaluka Blanche; Uche, Ifeanyi Valentine; Ismaila, Ahmed Mohammed

    2016-03-03

    Nigeria has made tremendous strides towards eliminating polio and has been free of wild polio virus (WPV) for more than a year as of August 2015. However, sustained focus towards getting rid of all types of poliovirus by improving population immunity and enhancing disease surveillance will be needed to ensure it sustains the polio-free status. We reviewed the pertinent literature including published and unpublished, official reports and working documents of the Global Polio Eradication Initiative (GPEI) partners as well as other concerned organizations. The literature were selected based on the following criteria: published in English Language, published after year 2000, relevant content and conformance to the theme of the review and these were sorted accordingly. The challenges facing the Polio Eradication Initiative (PEI) in Nigeria were found to fall into 3 broad categories viz failure to vaccinate, failure of the Oral Polio Vaccine (OPV) and epidemiology of the virus. Failure to vaccinate resulted from insecurity, heterogeneous political support, programmatic limitation in implementation of vaccination campaigns, poor performance of vaccination teams in persistently poor performing Local Government areas and sporadic vaccine refusals in Northern Nigeria. Sub optimal effectiveness of OPV in some settings as well as the rare occurrence of VDPVs associated with OPV type 2 in areas of low immunization coverage were also found to be key issues. Some of the innovations which helped to manage the threats to the PEI include a strong government accountability frame work, change from type 2 containing OPV to bi valent OPVs for supplementary immunization activities (SIA), enhancing environmental surveillance in key states (Sokoto, Kano and Borno) along with an overall improvement in SIA quality. There has been an improvement in coverage of routine immunization and vaccination campaigns, which has resulted in Nigeria being removed from the list of endemic countries

  17. Reward eliminates retrieval-induced forgetting.

    Science.gov (United States)

    Imai, Hisato; Kim, Dongho; Sasaki, Yuka; Watanabe, Takeo

    2014-12-02

    Although it is well known that reward enhances learning and memory, how extensively such enhancement occurs remains unclear. To address this question, we examined how reward influences retrieval-induced forgetting (RIF) in which the retrieval of a nonpracticed item under the same category as a practiced item is worse than the retrieval of a nonpracticed item outside the category. Subjects were asked to try to encode category-exemplar pairs (e.g., FISH-salmon). Then, they were presented with a category name and a two-letter word stem (e.g., FISH-sa) and were asked to complete an encoded word (retrieval practice). For a correct response, apple juice was given as a reward in the reward condition and a beeping sound was presented in the no-reward condition. Finally, subjects were asked to report whether each exemplar had been presented in the first phase. RIF was replicated in the no-reward condition. However, in the reward condition, RIF was eliminated. These results suggest that reward enhances processing of retrieval of unpracticed members by mechanisms such as spreading activation within the same category, irrespective of whether items were practiced or not.

  18. Eliminating Residents Increases the Cost of Care.

    Science.gov (United States)

    DeMarco, Deborah M; Forster, Richard; Gakis, Thomas; Finberg, Robert W

    2017-08-01

    Academic health centers are facing a potential reduction in Medicare financing for graduate medical education (GME). Both the Medicare Payment Advisory Commission and the National Commission on Fiscal Responsibility and Reform (Deficit Commission) have suggested cutting approximately half the funding that teaching hospitals receive for indirect medical education. Because of the effort that goes into teaching trainees, who are only transient employees, hospital executives often see teaching programs as a drain on resources. In light of the possibility of a Medicare cut to GME programs, we undertook an analysis to assess the financial risk of training programs to our institution and the possibility of saving money by reducing resident positions. The chief administrative officer, in collaboration with the hospital chief financial officer, performed a financial analysis to examine the possibility of decreasing costs by reducing residency programs at the University of Massachusetts Memorial Medical Center. Despite the real costs of our training programs, the analysis demonstrated that GME programs have a positive impact on hospital finances. Reducing or eliminating GME programs would have a negative impact on our hospital's bottom line.

  19. Seasonal blood shortages can be eliminated.

    Science.gov (United States)

    Gilcher, Ronald O; McCombs, Suzanne

    2005-11-01

    This review is designed to help readers understand seasonal blood shortages and provide solutions through the use of technology that can increase the number of red blood cell units collected and the use of recruitment and marketing initiatives that appeal to the increasingly diverse donor base. Seasonal shortages are, in reality, mostly shortages of group O red blood cells and occur most commonly during midsummer and early winter. The shortages occur primarily from increased use of group O red blood cells at times of decreased donor availability. While reducing the disproportionate use of red cells will help, blood centers can more quickly reduce the seasonal deficits by using automated red cell technology to collect double red blood cell units; targeted marketing programs to provide effective messages; seasonal advertising campaigns; and recognition, benefits, and incentives to enhance the donor motivation donation threshold. A multi-level approach to increasing blood donations at difficult times of the year can ensure that donations are increased at a time when regular donor availability is decreased. Seasonal blood shortages can be eliminated by understanding the nature of the shortages, why and when they occur, and using more sophisticated recruitment and marketing strategies as well as automated collection technologies to enhance the blood supply.

  20. Elimination of Sitophilus oryzae (L.) by irradiation

    International Nuclear Information System (INIS)

    Castro, Fernanda Peixoto

    2005-01-01

    Food treatment by exposure to ionizing radiation, known as food irradiation, presents several attractive features such as: leaving no residues, posing no threat to consumer health, usually causing no damage to sensory or nutritional properties and acting uniformly throughout the volume of the products. This work investigated the efficiency of irradiation for eliminating Sitophilus oryzae (L.), also known as 'the rice weevil', a small beetle frequently found in infested grains. A total of 444 individuals of Sitophilus oryzae (L.) found in corn meal and noodles supplies were irradiated with gamma ray doses of 0, 0.6, 0.9, 1.0, 1.2, 1.5 and 2.0 kGy and then visually monitored for 4 days in order to determine the number of insects still alive. The least-squares fitting method was used to determine the survival curves as functions of post-irradiation time and dose. The living fraction of the irradiated population was found to decrease exponentially with time. The results indicated that doses of 2.0, 1.5 and 0.6 kGy cause immediate death, instantaneous immobility and death of the species within one week, respectively. The findings suggest that disinfestation of Sitophilus oryzae (L.) by irradiation is an interesting option to the dangerous use of toxic chemicals. (author)

  1. Minimizing or eliminating refueling of nuclear reactor

    Science.gov (United States)

    Doncals, Richard A.; Paik, Nam-Chin; Andre, Sandra V.; Porter, Charles A.; Rathbun, Roy W.; Schwallie, Ambrose L.; Petras, Diane S.

    1989-01-01

    Demand for refueling of a liquid metal fast nuclear reactor having a life of 30 years is eliminated or reduced to intervals of at least 10 years by operating the reactor at a low linear-power density, typically 2.5 kw/ft of fuel rod, rather than 7.5 or 15 kw/ft, which is the prior art practice. So that power of the same magnitude as for prior art reactors is produced, the volume of the core is increased. In addition, the height of the core and it diameter are dimensioned so that the ratio of the height to the diameter approximates 1 to the extent practicable considering the requirement of control and that the pressure drop in the coolant shall not be excessive. The surface area of a cylinder of given volume is a minimum if the ratio of the height to the diameter is 1. By minimizing the surface area, the leakage of neutrons is reduced. By reducing the linear-power density, increasing core volume, reducing fissile enrichment and optimizing core geometry, internal-core breeding of fissionable fuel is substantially enhanced. As a result, core operational life, limited by control worth requirements and fuel burnup capability, is extended up to 30 years of continuous power operation.

  2. Elimination of mercury in health care facilities.

    Science.gov (United States)

    2000-03-01

    Mercury is a persistent, bioaccumulative toxin that has been linked to numerous health effects in humans and wildlife. It is a potent neurotoxin that may also harm the brain, kidneys, and lungs. Unborn children and young infants are at particular risk for brain damage from mercury exposure. Hospitals' use of mercury in chemical solutions, thermometers, blood pressure gauges, batteries, and fluorescent lamps makes these facilities large contributors to the overall emission of mercury into the environment. Most hospitals recognize the dangers of mercury. In a recent survey, four out of five hospitals stated that they have policies in place to eliminate the use of mercury-containing products. Sixty-two percent of them require vendors to disclose the presence of mercury in chemicals that the hospitals purchase. Only 12 percent distribute mercury-containing thermometers to new parents. Ninety-two percent teach their employees about the health and environmental effects of mercury, and 46 percent teach all employees how to clean up mercury spills. However, the same study showed that many hospitals have not implemented their policies. Forty-two percent were not aware whether they still purchased items containing mercury. In addition, 49 percent still purchase mercury thermometers, 44 percent purchase mercury gastrointestinal diagnostic equipment, and 64 percent still purchase mercury lab thermometers.

  3. Elimination device for decontaminated surface layers

    International Nuclear Information System (INIS)

    Yoshikawa, Kozo.

    1983-01-01

    Purpose: To conduct efficient decontamination injecting solid carbon dioxide particles at a high speed by using a simple and compact device. Constitution: Liquid carbon dioxide is injected from a first vessel containing liquid carbon dioxide by way of a carbon dioxide supply tube to a solid carbon dioxide particle jetting device. The liquid carbon dioxide is partially converted into fine solid carbon dioxide particles due to the temperature reduction caused by adiabatic expansion of the gaseous carbon dioxide in an expansion space for the gaseous carbon dioxide formed in the jetting device and arrives at a solid carbon dioxide injection nozzle in communication with the expansion space. Then, the fine solid carbon dioxide particles are further cooled and accelerated by the nitrogen gas jetted out from a nitrogen gas nozzle at the top of a nitrogen gas supply tube in communication with a second vessel containing liquid nitrogen disposed within the nozzle, and jetted out from the solid carbon dioxide injection nozzle to collide against the surface to be decontaminated and eliminate the surface contamination. (Seki, T.)

  4. Elimination of Sitophilus oryzae (L.) by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Fernanda Peixoto [Exercito Brasileiro, Brasilia, DF (Brazil). Diretoria de Suprimento. Dept. Logistico]. E-mail: peixotocastro@dlog.eb.mil.br; Vital, Helio de Carvalho [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (brazil)]. E-mail: vital@ctex.eb.br

    2005-07-01

    Food treatment by exposure to ionizing radiation, known as food irradiation, presents several attractive features such as: leaving no residues, posing no threat to consumer health, usually causing no damage to sensory or nutritional properties and acting uniformly throughout the volume of the products. This work investigated the efficiency of irradiation for eliminating Sitophilus oryzae (L.), also known as 'the rice weevil', a small beetle frequently found in infested grains. A total of 444 individuals of Sitophilus oryzae (L.) found in corn meal and noodles supplies were irradiated with gamma ray doses of 0, 0.6, 0.9, 1.0, 1.2, 1.5 and 2.0 kGy and then visually monitored for 4 days in order to determine the number of insects still alive. The least-squares fitting method was used to determine the survival curves as functions of post-irradiation time and dose. The living fraction of the irradiated population was found to decrease exponentially with time. The results indicated that doses of 2.0, 1.5 and 0.6 kGy cause immediate death, instantaneous immobility and death of the species within one week, respectively. The findings suggest that disinfestation of Sitophilus oryzae (L.) by irradiation is an interesting option to the dangerous use of toxic chemicals. (author)

  5. Elimination of excess molybdenum by cattle

    Energy Technology Data Exchange (ETDEWEB)

    Toelgyesi, G.; Elmoty, I.A.

    1967-01-01

    It was found that cattle would ingest spontaneously 5-15 g of molybdenum on one occasion. The uptake of this quantity caused but moderate loss of appetite and mild enteritis, both normalizing in one week. The occurrence of a severe acute molybdenum poisoning can be practically excluded, owing to refusal of the poisoned feed. Spontaneously ingested molybdenum caused on the first day a 30-100 fold rise of ruminal Mo-level, decreasing to the order of the normal value in about one week. But in the urine and faeces, Mo-level was at least 10 fold, in the blood and milk about 4 fold of the normal one, even one or two weeks after ingestion. During this period at least 90% of ingested Mo was eliminated with the faeces, urine and milk. One week after the ingestion of molybdenum, the rumen content showed no evidence on poisoning and no trace of molybdenum. Oral administration of ammonium molybdenate in an amount equivalent to 40 g molybdenum caused no fatality. In fact, cattle would never ingest spontaneously such a large dose.

  6. Thermal insulation

    International Nuclear Information System (INIS)

    Aspden, G.J.; Howard, R.S.

    1988-01-01

    The patent concerns high temperature thermal insulation of large vessels, such as the primary vessel of a liquid metal cooled nuclear reactor. The thermal insulation consists of multilayered thermal insulation modules, and each module comprises a number of metal sheet layers sandwiched between a back and front plate. The layers are linked together by straps and clips to control the thickness of the module. (U.K.)

  7. Fabrication techniques to eliminate postweld heat treatment

    International Nuclear Information System (INIS)

    Lochhead, J.C.

    1978-01-01

    Postweld heat treatments to reduce residual stresses (stress relief operations) have been a common practice in the pressure vessel industry for a large number of years. A suitable heat treatment operation can, in particular for low alloy steels, have additional beneficial effects, i.e. a reduction in peak hardness values in the heat-affected zone, an improvement in weld metal properties, and a lowering of the adverse effects of the welding process on the mechanical properties of the parent material adjacent to the weld metal. However, continuing studies in the field of brittle fracture, improved parent materials, and more sophisticated nondestructive testing techniques have led to the elimination of such a practice in ever-increasing thickness ranges and types of material. For instance, the recently issued BS 5500 compared with BS 1113 (1969) lifts the thickness limit requiring stress relief in certain circumstances from 19 to 35mm for C steels. With respect to materials the CEGB has stated that as a result of successful operational experience it will no longer be necessary to postweld heat treat butt welds in 2 1/4 Cr-1Mo tubes of certain dimensions. Despite this trend, over a period of years a number of instances have arisen where, because of some factor, postweld heat treatment, although perhaps desirable, is not possible. This Paper describes several such examples. It must be noted that the examples quoted consist of relatively important and major items. It has been necessary within the confines of this Paper to condense the reports. It is hoped that no significant factors have been omitted. (author)

  8. Optically Transparent Thermally Insulating Silica Aerogels for Solar Thermal Insulation.

    Science.gov (United States)

    Günay, A Alperen; Kim, Hannah; Nagarajan, Naveen; Lopez, Mateusz; Kantharaj, Rajath; Alsaati, Albraa; Marconnet, Amy; Lenert, Andrej; Miljkovic, Nenad

    2018-04-18

    Rooftop solar thermal collectors have the potential to meet residential heating demands if deployed efficiently at low solar irradiance (i.e., 1 sun). The efficiency of solar thermal collectors depends on their ability to absorb incoming solar energy and minimize thermal losses. Most techniques utilize a vacuum gap between the solar absorber and the surroundings to eliminate conduction and convection losses, in combination with surface coatings to minimize reradiation losses. Here, we present an alternative approach that operates at atmospheric pressure with simple, black, absorbing surfaces. Silica based aerogels coated on black surfaces have the potential to act as simple and inexpensive solar thermal collectors because of their high transmission to solar radiation and low transmission to thermal radiation. To demonstrate their heat-trapping properties, we fabricated tetramethyl orthosilicate-based silica aerogels. A hydrophilic aerogel with a thickness of 1 cm exhibited a solar-averaged transmission of 76% and thermally averaged transmission of ≈1% (at 100 °C). To minimize unwanted solar absorption by O-H groups, we functionalized the aerogel to be hydrophobic, resulting in a solar-averaged transmission of 88%. To provide a deeper understanding of the link between aerogel properties and overall efficiency, we developed a coupled radiative-conductive heat transfer model and used it to predict solar thermal performance. Instantaneous solar thermal efficiencies approaching 55% at 1 sun and 80 °C were predicted. This study sheds light on the applicability of silica aerogels on black coatings for solar thermal collectors and offers design priorities for next-generation solar thermal aerogels.

  9. Adoption of nitrogen power conversion system for small scale ultra-long cycle fast reactor eliminating intermediate sodium loop

    International Nuclear Information System (INIS)

    Seo, Seok Bin; Seo, Han; Bang, In Cheol

    2016-01-01

    Highlights: • N 2 power conversion system for both safety and thermal performance aspects. • Sensitivity studies of several controlled parameters on N 2 power conversion system. • The elimination of the intermediate loop increased the cycle thermal efficiency. • The elimination of the intermediate loop expects economic advantages. - Abstract: As one of SFRs, the ultra-long cycle fast reactor with a power rating of 100 MW e (UCFR-100) was introduced for a 60-year operation. As an alternative to the traditional steam Rankine cycle for the power conversion system, gas based Brayton cycle has been considered for UCFR-100. Among Supercritical CO 2 (S-CO 2 ), Helium (He), Nitrogen (N 2 ) as candidates for the power conversion system for UCFR-100, an N 2 power conversion system was chosen considering both safety and thermal performance aspects. The elimination of the intermediate sodium loop could be achieved due to the safety and stable characteristics of nitrogen working fluid. In this paper, sensitivity studies with respect to several controlled parameters on N 2 power conversion system were performed to optimize the system. Furthermore, the elimination of the intermediate loop was evaluated with respect to its impact on the thermodynamic performance and other aspects.

  10. Elimination of Hot Tears in Steel Castings by Means of Solidification Pattern Optimization

    Science.gov (United States)

    Kotas, Petr; Tutum, Cem Celal; Thorborg, Jesper; Hattel, Jesper Henri

    2012-06-01

    A methodology of how to exploit the Niyama criterion for the elimination of various defects such as centerline porosity, macrosegregation, and hot tearing in steel castings is presented. The tendency of forming centerline porosity is governed by the temperature distribution close to the end of the solidification interval, specifically by thermal gradients and cooling rates. The physics behind macrosegregation and hot tears indicate that these two defects also are dependent heavily on thermal gradients and pressure drop in the mushy zone. The objective of this work is to show that by optimizing the solidification pattern, i.e., establishing directional and progressive solidification with the help of the Niyama criterion, macrosegregation and hot tearing issues can be both minimized or eliminated entirely. An original casting layout was simulated using a transient three-dimensional (3-D) thermal fluid model incorporated in a commercial simulation software package to determine potential flaws and inadequacies. Based on the initial casting process assessment, multiobjective optimization of the solidification pattern of the considered steel part followed. That is, the multiobjective optimization problem of choosing the proper riser and chill designs has been investigated using genetic algorithms while simultaneously considering their impact on centerline porosity, the macrosegregation pattern, and primarily on hot tear formation.

  11. Thermal insulation

    International Nuclear Information System (INIS)

    Pinsky, G.P.

    1977-01-01

    Thermal insulation for vessels and piping within the reactor containment area of nuclear power plants is disclosed. The thermal insulation of this invention can be readily removed and replaced from the vessels and piping for inservice inspection, can withstand repeated wettings and dryings, and can resist high temperatures for long periods of time. 4 claims, 3 figures

  12. Multiscale thermal transport.

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Samuel Jr. (; .); Wong, C. C.; Piekos, Edward Stanley

    2004-02-01

    A concurrent computational and experimental investigation of thermal transport is performed with the goal of improving understanding of, and predictive capability for, thermal transport in microdevices. The computational component involves Monte Carlo simulation of phonon transport. In these simulations, all acoustic modes are included and their properties are drawn from a realistic dispersion relation. Phonon-phonon and phonon-boundary scattering events are treated independently. A new set of phonon-phonon scattering coefficients are proposed that reflect the elimination of assumptions present in earlier analytical work from the simulation. The experimental component involves steady-state measurement of thermal conductivity on silicon films as thin as 340nm at a range of temperatures. Agreement between the experiment and simulation on single-crystal silicon thin films is excellent, Agreement for polycrystalline films is promising, but significant work remains to be done before predictions can be made confidently. Knowledge gained from these efforts was used to construct improved semiclassical models with the goal of representing microscale effects in existing macroscale codes in a computationally efficient manner.

  13. Evaluating performance of high efficiency mist eliminators

    Energy Technology Data Exchange (ETDEWEB)

    Waggoner, Charles A.; Parsons, Michael S.; Giffin, Paxton K. [Mississippi State University, Institute for Clean Energy Technology, 205 Research Blvd, Starkville, MS (United States)

    2013-07-01

    Processing liquid wastes frequently generates off gas streams with high humidity and liquid aerosols. Droplet laden air streams can be produced from tank mixing or sparging and processes such as reforming or evaporative volume reduction. Unfortunately these wet air streams represent a genuine threat to HEPA filters. High efficiency mist eliminators (HEME) are one option for removal of liquid aerosols with high dissolved or suspended solids content. HEMEs have been used extensively in industrial applications, however they have not seen widespread use in the nuclear industry. Filtering efficiency data along with loading curves are not readily available for these units and data that exist are not easily translated to operational parameters in liquid waste treatment plants. A specialized test stand has been developed to evaluate the performance of HEME elements under use conditions of a US DOE facility. HEME elements were tested at three volumetric flow rates using aerosols produced from an iron-rich waste surrogate. The challenge aerosol included submicron particles produced from Laskin nozzles and super micron particles produced from a hollow cone spray nozzle. Test conditions included ambient temperature and relative humidities greater than 95%. Data collected during testing HEME elements from three different manufacturers included volumetric flow rate, differential temperature across the filter housing, downstream relative humidity, and differential pressure (dP) across the filter element. Filter challenge was discontinued at three intermediate dPs and the filter to allow determining filter efficiency using dioctyl phthalate and then with dry surrogate aerosols. Filtering efficiencies of the clean HEME, the clean HEME loaded with water, and the HEME at maximum dP were also collected using the two test aerosols. Results of the testing included differential pressure vs. time loading curves for the nine elements tested along with the mass of moisture and solid

  14. Study on the Synthesis and Characterization of Nano Silver Loaded ZSM-5 Zeolite for Bacterial Elimination.

    Science.gov (United States)

    Nam, Le Thi Hoai; Vinh, Tran Quang; Loan, Nguyen Thi Thanh; Nhiem, Nguyen Thi; Trang, Nguyen Thi Thu; Tan, Nguyen Minh; Radnik, Jörg

    2015-09-01

    The synthesis of nano silver coated ZSM-5 zeolite (Ag/ZSM-5) by ion exchange method combined with anaerobic thermal treatment and its bacterial elimination performance were studied. The various Ag content of different samples was analysed by atomic absorption spectroscopy method. The Ag/ZSM-5 sample with 0.251 wt% Ag (denoted as ZAg3) was characterized by using atomic absorption spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and pulsed CO chemisorption methods. The results showed that silver nanoparticles with a small nano-size of 2-3 nm were formed and distributed on the surface of ZSM-5 zeolite with a dispersion value of 59%. The samples denoted as ZAg1, ZAg2, ZAg3, ZAg4 correspond to a Ag content of 0.064; 0.128; 0.251; 0.253 wt% Ag. In the evaluation series, after 10 min of contact time between bacterial and Ag/ZSM-5, over 99% of E.coli (initial concentration was 10(6) cfu/ml) could be eliminated by Ag/ZSM-5 with the Ag content of at least 0.251 wt% (ZAg3). In addition, over 99% of Coliform (initial concentration was 10(5) cfu/ml) could be eliminated by Ag/ZSM-5 with Ag content of at least 0.128 wt% (ZAg2). In a further evaluation series varying the contact time, ZAg3 sample could eliminate over 99% and 100% of Ecoli after 10 min and 60 min, respectively (initial concentrations of both E.coli and Coliform were 10(5) cfu/ml). In addition, it could eliminate 100% of Coliform in only 10 min of contact time.

  15. Thermal Performance Benchmarking: Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Xuhui [National Renewable Energy Laboratory (NREL), Golden, CO (United States). Transportation and Hydrogen Systems Center

    2017-10-19

    In FY16, the thermal performance of the 2014 Honda Accord Hybrid power electronics thermal management systems were benchmarked. Both experiments and numerical simulation were utilized to thoroughly study the thermal resistances and temperature distribution in the power module. Experimental results obtained from the water-ethylene glycol tests provided the junction-to-liquid thermal resistance. The finite element analysis (FEA) and computational fluid dynamics (CFD) models were found to yield a good match with experimental results. Both experimental and modeling results demonstrate that the passive stack is the dominant thermal resistance for both the motor and power electronics systems. The 2014 Accord power electronics systems yield steady-state thermal resistance values around 42- 50 mm to the 2nd power K/W, depending on the flow rates. At a typical flow rate of 10 liters per minute, the thermal resistance of the Accord system was found to be about 44 percent lower than that of the 2012 Nissan LEAF system that was benchmarked in FY15. The main reason for the difference is that the Accord power module used a metalized-ceramic substrate and eliminated the thermal interface material layers. FEA models were developed to study the transient performance of 2012 Nissan LEAF, 2014 Accord, and two other systems that feature conventional power module designs. The simulation results indicate that the 2012 LEAF power module has lowest thermal impedance at a time scale less than one second. This is probably due to moving low thermally conductive materials further away from the heat source and enhancing the heat spreading effect from the copper-molybdenum plate close to the insulated gate bipolar transistors. When approaching steady state, the Honda system shows lower thermal impedance. Measurement results of the thermal resistance of the 2015 BMW i3 power electronic system indicate that the i3 insulated gate bipolar transistor module has significantly lower junction

  16. Conformal anomaly and elimination of infrared divergences in curved spacetime

    International Nuclear Information System (INIS)

    Grib, A.A.; Nesteruk, A.V.; Pritomanov, S.A.

    1984-01-01

    The relation between the problem of eliminating the infrared divergences and the conformal anomaly of the regularized energy-momentum tensor is studied in homogeneous isotropic and anisotropic spacetime. It is shown that elimination of the infrared divergence by means of a cutoff or the introduction of a conformally invariant mass of the field leads to the absence of the conformal anomaly

  17. The Role of Quantifier Alternations in Cut Elimination

    DEFF Research Database (Denmark)

    Gerhardy, Philipp

    2005-01-01

    Extending previous results on the complexity of cut elimination for the sequent calculus LK, we discuss the role of quantifier alternations and develop a measure to describe the complexity of cut elimination in terms of quantifier alternations in cut formulas and contractions on such formulas...

  18. Rabies Elimination in Dogs in the United States

    Centers for Disease Control (CDC) Podcasts

    Rabies has been eliminated from dogs in the United States through efforts to promote annual vaccination, but it's still a problem in wildlife in the U.S. and in wild and domesticated animals abroad. In this podcast, CDC's Dr. Charles Rupprecht discusses a study which provides proof of the elimination of rabies in dogs and what this means for the average American.

  19. Malaria elimination practices in rural community residents in ...

    African Journals Online (AJOL)

    53. Rwanda Journal Series F: Medicine and Health Sciences Vol. 2 No. 1, 2015. Malaria elimination practices in rural community residents in Rwanda: A cross sectional study ... is an entirely preventable and treatable disease, provided that effective .... The most way used for malaria prevention, control and elimination.

  20. Making Career Decisions--A Sequential Elimination Approach.

    Science.gov (United States)

    Gati, Itamar

    1986-01-01

    Presents a model for career decision making based on the sequential elimination of occupational alternatives, an adaptation for career decisions of Tversky's (1972) elimination-by-aspects theory of choice. The expected utility approach is reviewed as a representative compensatory model for career decisions. Advantages, disadvantages, and…

  1. 75 FR 65238 - Loan Guaranty: Elimination of Redundant Regulations; Correction

    Science.gov (United States)

    2010-10-22

    ... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 36 RIN 2900-AN71 Loan Guaranty: Elimination of... June 15, 2010 (75 FR 33704), amending its loan guaranty regulations to eliminate redundant regulations... INFORMATION CONTACT: William White, Acting Assistant Director for Loan Processing and Valuation (262...

  2. Thermal expansion

    International Nuclear Information System (INIS)

    Yun, Y.

    2015-01-01

    Thermal expansion of fuel pellet is an important property which limits the lifetime of the fuels in reactors, because it affects both the pellet and cladding mechanical interaction and the gap conductivity. By fitting a number of available measured data, recommended equations have been presented and successfully used to estimate thermal expansion coefficient of the nuclear fuel pellet. However, due to large scatter of the measured data, non-consensus data have been omitted in formulating the equations. Also, the equation is strongly governed by the lack of appropriate experimental data. For those reasons, it is important to develop theoretical methodologies to better describe thermal expansion behaviour of nuclear fuel. In particular, first-principles and molecular dynamics simulations have been certainly contributed to predict reliable thermal expansion without fitting the measured data. Furthermore, the two theoretical techniques have improved on understanding the change of fuel dimension by describing the atomic-scale processes associated with lattice expansion in the fuels. (author)

  3. Engineering New Catalysts for In-Process Elimination of Tars

    Energy Technology Data Exchange (ETDEWEB)

    Felix, Larry G. [Gas Technology Inst., Des Plaines, IL (United States)

    2012-09-30

    The key objective of this project was to develop a new and more efficient methodology for engineering and economically producing optimized robust catalysts for the reduction or elimination of tars in biomass gasification. Whereas current catalyst technology typically disposes thin layers of catalytically-active material onto rigid supports via wet chemistry-based methods, this project investigated novel thermal methods for directly incorporating catalytically active materials onto robust supports as well as novel approaches for incorporating catalytically active materials on and/or within an otherwise inert refractory support material which is then subsequently formed and processed to create a catalytically-active material on all exposed surfaces. Specifically, the focus of this engineered catalyst development was on materials which were derived from, or otherwise related to, olivine-like minerals, due to the inherent attrition resistance and moderate catalytic properties exhibited by natural olivine when used in a fluidized bed biomass gasifier. Task 1 of this project successfully demonstrated the direct thermal impregnation of catalytically-active materials onto an olivine substrate, with the production of a Ni-olivine catalyst. Nickel and nickel oxide were thermally impregnated onto an olivine substrate and when reduced were shown to demonstrate improved catalytic activity over the baseline olivine material and equal the tar-decomposing performance of Ni-olivine catalysts prepared by conventional wet impregnation. Task 2 involved coordination with our subcontracted project partners to further develop and characterize catalyst formulations and to optimize activity and production methods. Within this task, several significant new materials were developed. NexTech Materials developed a sintered ceramic nickel-magnesium-silicate catalyst that demonstrated superb catalytic activity and high resistance to deactivation by H2S. Alfred University developed both supported

  4. Hepatic, renal, and total body galactose elimination in the pig

    DEFF Research Database (Denmark)

    Winkler, K; Henriksen, Jens Henrik Sahl; Tygstrup, N

    1993-01-01

    Galactose elimination capacity is used as a quantitative measure of liver function on the assumption that galactose elimination outside the liver is negligible or easily corrected for. The relationship between hepatic and extrahepatic removal of galactose was studied in anesthetized pigs during...... reabsorption (Tm 178 +/- 3.0 mumol/min, Km 3.8 +/- 0.9 mmol/l, n = 20). Metabolic conversion of galactose in the kidney was not demonstrable. At all concentrations studied (0.4-5.8 mmol/l), total galactose elimination from the body exceeded the sum of hepatic and renal elimination by approximately 100 mumol....../min, independent of the concentration. At blood concentrations usually used for clinical estimation of the galactose elimination capacity (approximately 4 mmol/l), hepatic removal in the pig accounted for 55% and renal removal for 30% of total removal; 15% of removal occurred in other organs. We conclude...

  5. Elimination of americium-241 after a case of accidental inhalation

    International Nuclear Information System (INIS)

    Edvardsson, K.A.; Lindgren, L.

    1976-01-01

    In handling a 241 Am source one person received an internal contamination of about 140 nCi of americium oxide, which was deposited in the lung region. Elimination of the activity was followed for more than 3 months by external gamma counting and excreta analyses. During the first week after the inhalation about 80% of the total intake was eliminated with an effective half-life of less than 2 days. The remaining activity, deposited in the lung region, was eliminated with an effective half-life of about 17 days. About 15% of the activity eliminated from the lung region from the 10th to the 50th day was eliminated in the faeces. (author)

  6. Natural gas domestic market development for total elimination of routine flares in Nigeria's upstream petroleum operations

    International Nuclear Information System (INIS)

    Sonibare, J.A.; Akeredolu, F.A.

    2006-01-01

    Several research findings confirmed that gaseous emissions and thermal radiation emanate from flaring activities during separation of oil from gas in the petroleum upstream operations. This, coupled with identified degradation potential of flares, makes flaring of about 71 million m 3 /day of associated gas a great concern. In this paper, several efforts hitherto made by government and organized private sectors at monetizing associated natural gas being flared on daily basis in Nigeria were reviewed. Domestic market development, if adopted, could eliminate routine gas flaring by 2008, meeting a goal set by Nigerian Government. Various scenarios considered showed that relatively minor amounts of natural gas could be consumed domestically for cooking; the balance would be absorbed by thermal electricity generation. It could lead to total consumption of between 92 and 140 million m 3 /day of natural gas in the country, representing a fraction of the domestic energy market

  7. Thermally Actuated Hydraulic Pumps

    Science.gov (United States)

    Jones, Jack; Ross, Ronald; Chao, Yi

    2008-01-01

    vessels. Heretofore, electrically actuated hydraulic pumps have been used for this purpose. By eliminating the demand for electrical energy for pumping, the use of the thermally actuated hydraulic pumps could prolong the intervals between battery charges, thus making it possible to greatly increase the durations of undersea exploratory missions.

  8. Thermal Properties and Thermal Analysis:

    Science.gov (United States)

    Kasap, Safa; Tonchev, Dan

    The chapter provides a summary of the fundamental concepts that are needed to understand the heat capacity C P, thermal conductivity κ, and thermal expansion coefficient α L of materials. The C P, κ, and α of various classes of materials, namely, semiconductors, polymers, and glasses, are reviewed, and various typical characteristics are summarized. A key concept in crystalline solids is the Debye theory of the heat capacity, which has been widely used for many decades for calculating the C P of crystals. The thermal properties are interrelated through Grüneisen's theorem. Various useful empirical rules for calculating C P and κ have been used, some of which are summarized. Conventional differential scanning calorimetry (DSC) is a powerful and convenient thermal analysis technique that allows various important physical and chemical transformations, such as the glass transition, crystallization, oxidation, melting etc. to be studied. DSC can also be used to obtain information on the kinetics of the transformations, and some of these thermal analysis techniques are summarized. Temperature-modulated DSC, TMDSC, is a relatively recent innovation in which the sample temperature is ramped slowly and, at the same time, sinusoidally modulated. TMDSC has a number of distinct advantages compared with the conventional DSC since it measures the complex heat capacity. For example, the glass-transition temperature T g measured by TMDSC has almost no dependence on the thermal history, and corresponds to an almost step life change in C P. The new Tzero DSC has an additional thermocouple to calibrate better for thermal lags inherent in the DSC measurement, and allows more accurate thermal analysis.

  9. Comparative metabolism and elimination of acetanilide compounds by rat.

    Science.gov (United States)

    Davison, K L; Larsen, G L; Feil, V J

    1994-10-01

    1. 14C-labelled propachlor, alachlor, butachlor, metolachlor, methoxypropachlor and some of their mercapturic acid pathway metabolites (MAP) were given to rat either by gavage or by perfusion into a renal artery. MAP metabolites were isolated from bile and urine. 2. Rat gavaged with propachlor and methoxypropachlor eliminated 14C mostly in urine, whereas rat gavaged with alachlor, butachlor and metolachlor eliminated 14C about equally divided between urine and faeces. When bile ducts were cannulated, the gavaged rat eliminated most of the 14C in bile for all compounds. The amount of 14C in bile from the propachlor-gavaged rat was less than that for the other acetanilides, with the difference being in the urine. 3. The mercapturic acid metabolites 2-methylsulphinyl-N-(1-methylhydroxyethyl)-N-phenylacetam ide and 2-methylsulphinyl-N-(1-methylmethoxyethyl)-N-phenylacetam ide were isolated from the urine and bile of the methoxypropachlor-gavaged rat. 4. Bile was the major route for 14C elimination when MAP metabolites of alachlor, butachlor and metolachlor were perfused into a renal artery. Urine was the major route for 14C elimination when MAP metabolites of propachlor and methoxypropachlor were perfused. Mercapturic acid conjugates were major metabolites in bile and urine when MAP metabolites were perfused. 5. We conclude that alkyl groups on the phenyl portion of the acetanilide causes biliary elimination to be favoured over urinary elimination.

  10. Uptake, disposition, and elimination of acrylamide in rainbow trout

    International Nuclear Information System (INIS)

    Petersen, D.W.; Kleinow, K.M.; Kraska, R.C.; Lech, J.J.

    1985-01-01

    The uptake, disposition, and elimination of [2,3- 14 C]acrylamide was studied in fingerling rainbow trout exposed to 0.388 and 0.710 mg/liter [2,3- 14 C]acrylamide at 12 degrees C under static water conditions for 72 hr. 14 C in carcass and viscera was determined at times ranging from 4 to 72 hr after the beginning of the exposure period and 4 to 96 hr after transfer of the fish to fresh flowing water for the elimination studies. Uptake of 14 C was initially rapid and plateaued after 72 hr of acrylamide exposure. No appreciable bioaccumulation occurred in carcass or viscera at either exposure concentration and 14 C distributed approximately equally to all tissues studied. Elimination of 14 C from carcass and viscera was biphasic with a terminal half-life of approximately 7 days. 14 C elimination was not uniform in all tissues studied with the most rapid elimination occurring in blood and gill and the slowest elimination occurring in muscle and intestine. In addition, 10 to 15% of the initial total 14 C in carcass or viscera was nonextractable and was associated with the protein fraction of the sample at all time points in the depuration period. Approximately 20% of an ip administered dose of [ 14 C]acrylamide was eliminated via the gills, 7% via the urine, and less than 1% via the bile in 2 hr. At least three biliary metabolites were isolated by HPLC

  11. Progress toward elimination of onchocerciasis in the Americas.

    Science.gov (United States)

    Sauerbrey, Mauricio; Rakers, Lindsay J; Richards, Frank O

    2018-03-01

    The Onchocerciasis Elimination Program for the Americas (OEPA) is a regional initiative and international partnership that has made considerable progress toward its goal since it was launched in 1993. Its strategy is based on mass drug administration of ivermectin (Mectizan, donated by MSD, also known as Merck & Co., Inc., Kenilworth, NJ, USA), twice or four times per year, with at least 85% coverage of eligible populations. From 1989 to 2016, 11 741 276 ivermectin treatments have been given in the Americas, eliminating transmission in 11 of 13 foci. The OEPA's success has had a great influence on programs in Africa, especially Sudan and Uganda, which moved from a control to an elimination strategy in 2006 and 2007, respectively. The successes in the Americas have also greatly influenced WHO guidelines for onchocerciasis transmission elimination. With four of the six originally endemic American countries now WHO verified as having eliminated onchocerciasis transmission, and 95% of ivermectin treatments in the region halted, the regional focus is now on the remaining active transmission zone, called the Yanomami Area, on the border between Venezuela and Brazil. Both countries have difficult political climates that hinder the elimination task in this remote and relatively neglected region. As with other elimination efforts, 'the final inch' is often the most difficult task of all.

  12. Experimental investigation of cobalt-60 accumulation and elimination in Cyprinus carpio (L.)

    International Nuclear Information System (INIS)

    Fritsch, A.F.

    1985-11-01

    When introduced in cation form, 60 Co showed a distinct tendency to form anion or neutral complexes (50% and 20%, respectively); this was favorized by a high biomass content per liter of water. The ionic evolution of the radionuclide did not affect its accumulation level in the fish. Direct contamination predominated (70%) and the concentration factor at equilibrium was 10. Nutritional transfer from Limnaea to carp, after ingestion of 45 contaminated rations in 63 days, resulted in a low radionuclide retention factor (3 x 10 -3 ) that was not subject to bioamplification. Cobalt-60 was primarily eliminated via urine (60%), while the fecal matter contained only 20% of the radioactive isotope ingested in the food. The 60 Co content of carp contaminated from the water increased proportionally with the temperature. However, the 60 Co concentration did not vary significantly with the thermal factor, and the radionuclide concentration factor ranged from 4 to 6 between 8 0 C and 25 0 C. Decontamination was generally a two-phase process characterized by a short biological half-life ( 60 Co contained in the fish. The high 60 Co content of the digestive tract may be explained by fecal excretion of the radioactive isotope (30-40% of the elimination). The kidneys act as radionuclide elimination regulators via the urinary system [fr

  13. Effect of Selected Mercapto Flavor Compounds on Acrylamide Elimination in a Model System

    Directory of Open Access Journals (Sweden)

    Zhiyong Xiong

    2017-05-01

    Full Text Available The effect of four mercapto flavor compounds (1,2-ethanedithiol, 1-butanethiol, 2-methyl-3-furanthiol, and 2-furanmethanethiol on acrylamide elimination were investigated in model systems. The obtained results showed that mercaptans assayed were effective in elimination arylamide in a model system. Their reactivities for decreasing acrylamide content depended on mercaptan’s molecular structure and acrylamide disappearance decreased in the following order: 1,2-ethanedithiol > 2-methyl-3-furanthiol > 1-butanethiol > 2-furanmethanethiol. Mercaptans were added to acrylamide to produce the corresponding 3-(alkylthio propionamides. This reaction was irreversible and only trace amounts of acrylamide were formed by thermal heating of 3-(alkylthio propanamide. Although a large amount disappeared, only part of the acrylamide conversed into 3-(alkylthio propionamides. All of these results constitute a fundamental proof of the complexity of the reactions involved in the removal of free acrylamide in foods. This implies mercapto flavor/aroma may directly or indirectly reduce the level of acrylamide in food processing. This study could be regarded as a pioneer contribution on acrylamide elimination in a model system by the addition of mercapto flavor compounds.

  14. An elimination diet for chronic urticaria of childhood.

    Science.gov (United States)

    Kemp, A S; Schembri, G

    1985-09-16

    Twenty-three children with chronic urticaria were treated with an elimination diet for two weeks. Eighteen completed the period of dietary elimination; in seven of the 18 children there was a marked remission of the urticaria during the second week of the diet. The administration of challenge capsules provoked an exacerbation of urticaria in five of the 14 (36%) children given aspirin. The incidence of reactions to tartrazine, sodium benzoate and yeast (7%) was not significantly different from those to the lactose placebo (9%). In selected cases, elimination diets with controlled reintroduction of foods have a role in the management of chronic urticaria in childhood.

  15. The economics of malaria control and elimination: a systematic review.

    Science.gov (United States)

    Shretta, Rima; Avanceña, Anton L V; Hatefi, Arian

    2016-12-12

    Declining donor funding and competing health priorities threaten the sustainability of malaria programmes. Elucidating the cost and benefits of continued investments in malaria could encourage sustained political and financial commitments. The evidence, although available, remains disparate. This paper reviews the existing literature on the economic and financial cost and return of malaria control, elimination and eradication. A review of articles that were published on or before September 2014 on the cost and benefits of malaria control and elimination was performed. Studies were classified based on their scope and were analysed according to two major categories: cost of malaria control and elimination to a health system, and cost-benefit studies. Only studies involving more than two control or elimination interventions were included. Outcomes of interest were total programmatic cost, cost per capita, and benefit-cost ratios (BCRs). All costs were converted to 2013 US$ for standardization. Of the 6425 articles identified, 54 studies were included in this review. Twenty-two were focused on elimination or eradication while 32 focused on intensive control. Forty-eight per cent of studies included in this review were published on or after 2000. Overall, the annual per capita cost of malaria control to a health system ranged from $0.11 to $39.06 (median: $2.21) while that for malaria elimination ranged from $0.18 to $27 (median: $3.00). BCRs of investing in malaria control and elimination ranged from 2.4 to over 145. Overall, investments needed for malaria control and elimination varied greatly amongst the various countries and contexts. In most cases, the cost of elimination was greater than the cost of control. At the same time, the benefits of investing in malaria greatly outweighed the costs. While the cost of elimination in most cases was greater than the cost of control, the benefits greatly outweighed the cost. Information from this review provides guidance to

  16. Criteria for eliminating items of a Test of Figural Analogies

    Directory of Open Access Journals (Sweden)

    Diego Blum

    2013-12-01

    Full Text Available This paper describes the steps taken to eliminate two of the items in a Test of Figural Analogies (TFA. The main guidelines of psychometric analysis concerning Classical Test Theory (CTT and Item Response Theory (IRT are explained. The item elimination process was based on both the study of the CTT difficulty and discrimination index, and the unidimensionality analysis. The a, b, and c parameters of the Three Parameter Logistic Model of IRT were also considered for this purpose, as well as the assessment of each item fitting this model. The unfavourable characteristics of a group of TFA items are detailed, and decisions leading to their possible elimination are discussed.

  17. On the mechanism of imine elimination from Fischer tungsten carbene complexes

    Directory of Open Access Journals (Sweden)

    Philipp Veit

    2016-06-01

    Full Text Available (Aminoferrocenyl(ferrocenylcarbene(pentacarbonyltungsten(0 (CO5W=C(NHFcFc (W(CO5(E-2 is synthesized by nucleophilic substitution of the ethoxy group of (CO5W=C(OEtFc (M(CO5(1Et by ferrocenyl amide Fc-NH– (Fc = ferrocenyl. W(CO5(E-2 thermally and photochemically eliminates bulky E-1,2-diferrocenylimine (E-3 via a formal 1,2-H shift from the N to the carbene C atom. Kinetic and mechanistic studies to the formation of imine E-3 are performed by NMR, IR and UV–vis spectroscopy and liquid injection field desorption ionization (LIFDI mass spectrometry as well as by trapping experiments for low-coordinate tungsten complexes with triphenylphosphane. W(CO5(E-2 decays thermally in a first-order rate-law with a Gibbs free energy of activation of ΔG‡298K = 112 kJ mol−1. Three proposed mechanistic pathways are taken into account and supported by detailed (time-dependent densitiy functional theory [(TD-DFT] calculations. The preferred pathway is initiated by an irreversible CO dissociation, followed by an oxidative addition/pseudorotation/reductive elimination pathway with short-lived, elusive seven-coordinate hydrido tungsten(II intermediates cis(N,H-W(CO4(H(Z-15 and cis(C,H-W(CO4(H(Z-15.

  18. Thermal comfort

    DEFF Research Database (Denmark)

    d’Ambrosio Alfano, Francesca Romana; Olesen, Bjarne W.; Palella, Boris Igor

    2014-01-01

    Thermal comfort is one of the most important aspects of the indoor environmental quality due to its effects on well-being, people's performance and building energy requirements. Its attainment is not an easy task requiring advanced design and operation of building and HVAC systems, taking...... into account all parameters involved. Even though thermal comfort fundamentals are consolidated topics for more than forty years, often designers seem to ignore or apply them in a wrong way. Design input values from standards are often considered as universal values rather than recommended values to be used...... under specific conditions. At operation level, only few variables are taken into account with unpredictable effects on the assessment of comfort indices. In this paper, the main criteria for the design and assessment of thermal comfort are discussed in order to help building and HVAC systems designers...

  19. Matrix thermalization

    International Nuclear Information System (INIS)

    Craps, Ben; Evnin, Oleg; Nguyen, Kévin

    2017-01-01

    Matrix quantum mechanics offers an attractive environment for discussing gravitational holography, in which both sides of the holographic duality are well-defined. Similarly to higher-dimensional implementations of holography, collapsing shell solutions in the gravitational bulk correspond in this setting to thermalization processes in the dual quantum mechanical theory. We construct an explicit, fully nonlinear supergravity solution describing a generic collapsing dilaton shell, specify the holographic renormalization prescriptions necessary for computing the relevant boundary observables, and apply them to evaluating thermalizing two-point correlation functions in the dual matrix theory.

  20. Matrix thermalization

    Science.gov (United States)

    Craps, Ben; Evnin, Oleg; Nguyen, Kévin

    2017-02-01

    Matrix quantum mechanics offers an attractive environment for discussing gravitational holography, in which both sides of the holographic duality are well-defined. Similarly to higher-dimensional implementations of holography, collapsing shell solutions in the gravitational bulk correspond in this setting to thermalization processes in the dual quantum mechanical theory. We construct an explicit, fully nonlinear supergravity solution describing a generic collapsing dilaton shell, specify the holographic renormalization prescriptions necessary for computing the relevant boundary observables, and apply them to evaluating thermalizing two-point correlation functions in the dual matrix theory.

  1. Matrix thermalization

    Energy Technology Data Exchange (ETDEWEB)

    Craps, Ben [Theoretische Natuurkunde, Vrije Universiteit Brussel (VUB), and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium); Evnin, Oleg [Department of Physics, Faculty of Science, Chulalongkorn University, Thanon Phayathai, Pathumwan, Bangkok 10330 (Thailand); Theoretische Natuurkunde, Vrije Universiteit Brussel (VUB), and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium); Nguyen, Kévin [Theoretische Natuurkunde, Vrije Universiteit Brussel (VUB), and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium)

    2017-02-08

    Matrix quantum mechanics offers an attractive environment for discussing gravitational holography, in which both sides of the holographic duality are well-defined. Similarly to higher-dimensional implementations of holography, collapsing shell solutions in the gravitational bulk correspond in this setting to thermalization processes in the dual quantum mechanical theory. We construct an explicit, fully nonlinear supergravity solution describing a generic collapsing dilaton shell, specify the holographic renormalization prescriptions necessary for computing the relevant boundary observables, and apply them to evaluating thermalizing two-point correlation functions in the dual matrix theory.

  2. Testing the hypothesis that treatment can eliminate HIV

    DEFF Research Database (Denmark)

    Okano, Justin T; Robbins, Danielle; Palk, Laurence

    2016-01-01

    BACKGROUND: Worldwide, approximately 35 million individuals are infected with HIV; about 25 million of these live in sub-Saharan Africa. WHO proposes using treatment as prevention (TasP) to eliminate HIV. Treatment suppresses viral load, decreasing the probability an individual transmits HIV....... The elimination threshold is one new HIV infection per 1000 individuals. Here, we test the hypothesis that TasP can substantially reduce epidemics and eliminate HIV. We estimate the impact of TasP, between 1996 and 2013, on the Danish HIV epidemic in men who have sex with men (MSM), an epidemic UNAIDS has...... identified as a priority for elimination. METHODS: We use a CD4-staged Bayesian back-calculation approach to estimate incidence, and the hidden epidemic (the number of HIV-infected undiagnosed MSM). To develop the back-calculation model, we use data from an ongoing nationwide population-based study...

  3. Elimination kinetic model for organic chemicals in earthworms.

    NARCIS (Netherlands)

    Dimitrova, N.; Dimitrov, S.; Georgieva, D.; van Gestel, C.A.M.; Hankard, P.; Spurgeon, D.J.; Li, H.; Mekenyan, O.

    2010-01-01

    Mechanistic understanding of bioaccumulation in different organisms and environments should take into account the influence of organism and chemical depending factors on the uptake and elimination kinetics of chemicals. Lipophilicity, metabolism, sorption (bioavailability) and biodegradation of

  4. Elimination of the Landau ghost from chiral solitons

    International Nuclear Information System (INIS)

    Hartmann, J.; Beck, F.; Bentz, W.

    1994-01-01

    We show a practical way based on the Kaellen-Lehmann representation for the two-point functions to eliminate the instability of the vacuum against formation of small sized meson configurations in the chiral σ model

  5. Eliminating Adversary Weapons of Mass Destruction: What's at Stake?

    National Research Council Canada - National Science Library

    Hersman, Rebecca K

    2004-01-01

    .... Unfortunately, the current preoccupation with intelligence might mask other issues and shortcomings in the American ability to eliminate the threat posed by weapons of mass destruction in the hands of its enemies...

  6. QUEST : Eliminating online supervised learning for efficient classification algorithms

    NARCIS (Netherlands)

    Zwartjes, Ardjan; Havinga, Paul J.M.; Smit, Gerard J.M.; Hurink, Johann L.

    2016-01-01

    In this work, we introduce QUEST (QUantile Estimation after Supervised Training), an adaptive classification algorithm for Wireless Sensor Networks (WSNs) that eliminates the necessity for online supervised learning. Online processing is important for many sensor network applications. Transmitting

  7. Natural elimination of volatile halogenated hydrocarbons from the environment

    Energy Technology Data Exchange (ETDEWEB)

    Harress, H.M.; Grathwohl, P.; Torunski, H.

    1987-01-01

    Recently carried out field investigations of groundwater contaminations with volatile halogenated hydrocarbons have shown evidence of natural elimination of these hazardous substances. This elimination effects is rare and observed in connection with special geological conditions. With regard to some contaminated sites, the following mechanisms for this behaviour are discussed: 1. Stripping by naturally ascending gases. 2. Sorption on soil organic matter. 3. Biodegradation. The so far compiled knowledge allowed to develop further research programmes, which are pursued in various projects.

  8. Lacunarity Elimination in the Translation of Nonequivalent Juridical Terms

    Directory of Open Access Journals (Sweden)

    Vladimir A. Lazarev

    2017-06-01

    Full Text Available In the article the authors refer to the problem of lacunarity elimination in legal texts reflecting national specific features in the legal sphere. Various ways of filling gaps when translating from English into Russian are suggested using legal-dogmatic theoretical texts as an example. Different variants of the lacunae elimination are proposed, which take into account the peculiarities of this type of text and can assist in the work of a legal translator.

  9. Which structural rules admit cut elimination? An algebraic criterion

    OpenAIRE

    Terui, Kazushige

    2007-01-01

    Consider a general class of structural inference rules such as exchange, weakening, contraction and their generalizations. Among them, some are harmless but others do harm to cut elimination. Hence it is natural to ask under which condition cut elimination is preserved when a set of structural rules is added to a structure-free logic. The aim of this work is to give such a condition by using algebraic semantics. ¶ We consider full Lambek calculus (FL), i.e., intuitioni...

  10. Progress Toward Regional Measles Elimination - Worldwide, 2000-2016.

    Science.gov (United States)

    Dabbagh, Alya; Patel, Minal K; Dumolard, Laure; Gacic-Dobo, Marta; Mulders, Mick N; Okwo-Bele, Jean-Marie; Kretsinger, Katrina; Papania, Mark J; Rota, Paul A; Goodson, James L

    2017-10-27

    The fourth United Nations Millennium Development Goal, adopted in 2000, set a target to reduce child mortality by two thirds by 2015. One indicator of progress toward this target was measles vaccination coverage (1). In 2010, the World Health Assembly (WHA) set three milestones for measles control by 2015: 1) increase routine coverage with the first dose of a measles-containing vaccine (MCV1) among children aged 1 year to ≥90% at the national level and to ≥80% in every district; 2) reduce global annual measles incidence to measles mortality by 95% from the 2000 estimate (2).* In 2012, WHA endorsed the Global Vaccine Action Plan, † with the objective of eliminating measles in four World Health Organization (WHO) regions by 2015 and in five regions by 2020. Countries in all six WHO regions have adopted goals for measles elimination by or before 2020. Measles elimination is defined as the absence of endemic measles virus transmission in a region or other defined geographic area for ≥12 months, in the presence of a high quality surveillance system that meets targets of key performance indicators. This report updates a previous report (3) and describes progress toward global measles control milestones and regional measles elimination goals during 2000-2016. During this period, annual reported measles incidence decreased 87%, from 145 to 19 cases per million persons, and annual estimated measles deaths decreased 84%, from 550,100 to 89,780; measles vaccination prevented an estimated 20.4 million deaths. However, the 2015 milestones have not yet been met; only one WHO region has been verified as having eliminated measles. Improved implementation of elimination strategies by countries and their partners is needed, with focus on increasing vaccination coverage through substantial and sustained additional investments in health systems, strengthening surveillance systems, using surveillance data to drive programmatic actions, securing political commitment, and raising

  11. Elimination of copper in tissues and organs of rainbow trout

    Directory of Open Access Journals (Sweden)

    Gaye Dogan

    2011-01-01

    Full Text Available Copper (Cu elimination was investigated in the tissue and organs of rainbow trout (Oncorhynchus mykiss, Walbaum, 1792, after Cu-free diets exposure. In the current study, fish were fed to satiation on diets containing 0.022 (Group 1; Control, 0.043 (Group 2, 0.123 (Group 3, 0.424 (Group 4 g Cu*kg-1 diet for 60 days before elimination experiment. A total of 288 fish (mean weight 84.28±1.05 g were randomly transferred to 12 fibreglass tanks. The fish were fed the Cu-free diet twice daily, until apparent satiation, during 60 days. Subsequently, the experiment was established for a period of elimination, during which samples were taken at days 15, 30, 45 and 60. Cu concentration in the muscle, gill tissue, digestive system, liver and whole body of fish were determined after 60 days depuration. Cu concentrations in tissues of rainbow trout decreased during depuration period, and the order of Cu elimination in tissue and organs of rainbow trout was: digestive system (73.1 %, then gill (41.1 %, muscle (31.5 % and liver (17.2 % for group 2; digestive system (74.1%, then muscle (65.8%, gill (60.0% and liver (34.6% for group 3; and digestive system (85.8%, then muscle (80.8%, liver (50.5% and less/equal in gill (50.2% for group 4. In statistical analysis, both groups and time were significant factors (P less than 0.05 on elimination rate. Moreover, significant interaction between groups and time were identified on elimination rate. Digestive system showed the fastest elimination rates of Cu at all groups compared with other tissues.

  12. Thermal insulation

    International Nuclear Information System (INIS)

    Durston, J.G.; Birch, W.; Facer, R.I.; Stuart, R.A.

    1977-01-01

    Reference is made to liquid metal cooled nuclear reactors. In the arrangement described the reactor vessel is clad with thermal insulation comprising a layer of insulating blocks spaced from the wall and from each other; each block is rigidly secured to the wall, and the interspaces are substantially closed against convectional flow of liquid by resilient closure members. A membrane covering is provided for the layer of blocks, with venting means to allow liquid from the reactor vessel to penetrate between the covering and the layer of blocks. The membrane covering may comprise a stainless steel sheet ribbed in orthogonal pattern to give flexibility for the accommodation of thermal strain. The insulating blocks may be comprised of stainless steel or cellular or porous material and may be hollow shells containing ceramic material or gas fillings. (U.K.)

  13. Solar thermal

    International Nuclear Information System (INIS)

    Jones, J.

    2006-01-01

    While wind power is widely acknowledged as the most developed of the 'new' renewables, the number two technology, in terms of installed capacity functioning worldwide, is solar heating, or solar thermal. The author has investigated recent industry reports on how these markets are developing. The authors of an International Energy Agency (IEA) survey studied 41 countries in depth at the end of 2004, revealing that 141 million m 3 - corresponding to an installed capacity of 98.4 GWth - were installed in the sample countries (these nations represent 3.74 billion people, about 57% of the world's population). The installed capacity within the areas studied represents approximately 85%-90% of the solar thermal market worldwide. The use of solar heating varies greatly between countries - even close neighbours - and between economic regions. Its uptake often has more to do with policy than solar resource. There is also different uptake of technology. In China, Europe and Japan, plants with flat-plate and evacuated tube collectors are used, mainly to heat water and for space heating. Unglazed plastic collectors, used mainly for swimming pool heating, meanwhile, dominate the North American markets. Though the majority of solar heating installations today are installed on domestic rooftops, the larger-scale installations should not be overlooked. One important part of the market is the hotel sector - in particular hotels in locations that serve the seasonal summer holiday market, where solar is extremely effective. Likewise hospitals and residential homes, multi-family apartment blocks and sports centres are all good examples of places where solar thermal can deliver results. There are also a growing number of industrial applications, where solar thermal can meet the hot water needs (and possibly more) of a range of industries, such as food processing and agriculture. The ability of solar to provide a heat source for cooling is expected to become increasingly important as

  14. Solar thermal

    Energy Technology Data Exchange (ETDEWEB)

    Jones, J.

    2006-07-15

    While wind power is widely acknowledged as the most developed of the 'new' renewables, the number two technology, in terms of installed capacity functioning worldwide, is solar heating, or solar thermal. The author has investigated recent industry reports on how these markets are developing. The authors of an International Energy Agency (IEA) survey studied 41 countries in depth at the end of 2004, revealing that 141 million m{sup 3} - corresponding to an installed capacity of 98.4 GWth - were installed in the sample countries (these nations represent 3.74 billion people, about 57% of the world's population). The installed capacity within the areas studied represents approximately 85%-90% of the solar thermal market worldwide. The use of solar heating varies greatly between countries - even close neighbours - and between economic regions. Its uptake often has more to do with policy than solar resource. There is also different uptake of technology. In China, Europe and Japan, plants with flat-plate and evacuated tube collectors are used, mainly to heat water and for space heating. Unglazed plastic collectors, used mainly for swimming pool heating, meanwhile, dominate the North American markets. Though the majority of solar heating installations today are installed on domestic rooftops, the larger-scale installations should not be overlooked. One important part of the market is the hotel sector - in particular hotels in locations that serve the seasonal summer holiday market, where solar is extremely effective. Likewise hospitals and residential homes, multi-family apartment blocks and sports centres are all good examples of places where solar thermal can deliver results. There are also a growing number of industrial applications, where solar thermal can meet the hot water needs (and possibly more) of a range of industries, such as food processing and agriculture. The ability of solar to provide a heat source for cooling is expected to become

  15. Primary chromatic aberration elimination via optimization work with genetic algorithm

    Science.gov (United States)

    Wu, Bo-Wen; Liu, Tung-Kuan; Fang, Yi-Chin; Chou, Jyh-Horng; Tsai, Hsien-Lin; Chang, En-Hao

    2008-09-01

    Chromatic Aberration plays a part in modern optical systems, especially in digitalized and smart optical systems. Much effort has been devoted to eliminating specific chromatic aberration in order to match the demand for advanced digitalized optical products. Basically, the elimination of axial chromatic and lateral color aberration of an optical lens and system depends on the selection of optical glass. According to reports from glass companies all over the world, the number of various newly developed optical glasses in the market exceeds three hundred. However, due to the complexity of a practical optical system, optical designers have so far had difficulty in finding the right solution to eliminate small axial and lateral chromatic aberration except by the Damped Least Squares (DLS) method, which is limited in so far as the DLS method has not yet managed to find a better optical system configuration. In the present research, genetic algorithms are used to replace traditional DLS so as to eliminate axial and lateral chromatic, by combining the theories of geometric optics in Tessar type lenses and a technique involving Binary/Real Encoding, Multiple Dynamic Crossover and Random Gene Mutation to find a much better configuration for optical glasses. By implementing the algorithms outlined in this paper, satisfactory results can be achieved in eliminating axial and lateral color aberration.

  16. Rabies elimination research: juxtaposing optimism, pragmatism and realism.

    Science.gov (United States)

    Cleaveland, Sarah; Hampson, Katie

    2017-12-20

    More than 100 years of research has now been conducted into the prevention, control and elimination of rabies with safe and highly efficacious vaccines developed for use in human and animal populations. Domestic dogs are a major reservoir for rabies, and although considerable advances have been made towards the elimination and control of canine rabies in many parts of the world, the disease continues to kill tens of thousands of people every year in Africa and Asia. Policy efforts are now being directed towards a global target of zero human deaths from dog-mediated rabies by 2030 and the global elimination of canine rabies. Here we demonstrate how research provides a cause for optimism as to the feasibility of these goals through strategies based around mass dog vaccination. We summarize some of the pragmatic insights generated from rabies epidemiology and dog ecology research that can improve the design of dog vaccination strategies in low- and middle-income countries and which should encourage implementation without further delay. We also highlight the need for realism in reaching the feasible, although technically more difficult and longer-term goal of global elimination of canine rabies. Finally, we discuss how research on rabies has broader relevance to the control and elimination of a suite of diseases of current concern to human and animal health, providing an exemplar of the value of a 'One Health' approach. © 2017 The Authors.

  17. State plans to force companies to eliminate environmental burdens

    International Nuclear Information System (INIS)

    Marcan, P.

    2004-01-01

    The Ministry of Environment is preparing legislation aimed at forcing the state and especially private enterprises to map and eliminate tips, refuse from company premises and farmyards, and manure heaps. It is expected that the main burden will fall on private enterprises. The department is still working on the wording of this new Act on environmental burdens and so it is not yet clear whether it will be of assistance in the elimination of environmental burdens. The Ministry is aware that economic aspects must also be taken into account when exercising pressure on the companies. Closing down a company that cannot meet environmental criteria would result in redundancies and so the time schedule for the elimination of environmental burdens will be adjusted to fit the financial situation of the company involved. The ministry plans to first find companies responsible for environmental debts and then set a deadline for the preparation of a project to eliminate the environmental burden. The project would have to contain a description of elimination methods, in addition to a time schedule and cost assessment. If a private company does not report an environmental burden, the competent public authority will have the power to request access to the premises to undertake an inspection. (author)

  18. Saving of drinking water in cooling system at Aq aba Thermal Power Station

    International Nuclear Information System (INIS)

    Al-Nsour, A.F.

    2001-01-01

    This paper discussing a new modification, design and implementation to the existing cooling water system of boiler drum continuous blow down water at Aq aba Thermal Power Stations to eliminate drinking water consumption as a coolant medium

  19. Thermal oxidation for air toxics control

    International Nuclear Information System (INIS)

    Pennington, R.L.

    1991-01-01

    The Administration projects annual expenditures of $1.1 billion by 1995, increasing to $6.7 billion by 2005, in order to comply with the new Clean Air Act Title III hazardous air pollutant requirements. The Title III requirements include 189 hazardous air pollutants which must be reduced or eliminated by 2003. Twenty of the 189 listed pollutants account for approximately 75 percent of all hazardous air pollutant emissions. Ninety percent of these 20 pollutants can be effectively controlled through one or mote of the thermal oxidation technologies. This paper reports that the advantages and disadvantages of each thermal oxidation technology vary substantially and must be reviewed for each application in order to establish the most effective thermal oxidation solution. Effective thermal oxidation will meet MACT (maximum achievable control technology) emission standards

  20. Molybdenum peroxo complex. Structure and thermal behavior

    Energy Technology Data Exchange (ETDEWEB)

    Segawa, Koichi; Ooga, Katsumi; Kurusu, Yasuhiko

    1984-10-01

    The molybdenum peroxide (Mo-y) prepared by oxidation of molybdenum metal with hydrogen peroxide has been studied to determine its structure and thermal behavior. Temperature programmed decomposition has been used to study the thermal stability of Mo-y. Two distinct peaks, I and II, of decomposition processes are discernible in Mo-y. Peak I corresponds to the elimination of water of crystallization and peak II to the decomposition of a peroxide ion of Mo-y. IR and UV examinations support the results of the thermal analysis. The IR band at 931 cm/sup -1/ and the UV band at 381 nm show the same thermal behavior. Both bands are attributable to the peroxide ion of Mo-y. Spectroscopic studies show that Mo-y has the tetrahedral coordination derived from the single molybdenum complex, which has double bond oxygens attached to Mo atom and has a symmetric type of peroxide ion with one water of crystallization.

  1. Passive elimination of static electricity in oil industry

    Directory of Open Access Journals (Sweden)

    Gaćanović Mićo

    2014-01-01

    Full Text Available This study explains the existing and real conditions of a possible passive elimination of static electricity when loading oil and oil derivatives. We are considering the formation and survival of gas bubbles both in the volume of oil in its depth, but also at the surface of oil and oil derivatives of the partly filled reservoir, and formation of both volume and surface electric charge in oil and oil derivatives. The study presents the research of formation and survival of static electricity in both reservoirs and tank trucks of different geometric shapes partly filled with oil and oil derivatives. We are proposing a new original possibility of passive elimination of static electricity when loading oil and oil derivatives in reservoirs and tank trucks. The proposed passive device for elimination of static electricity is protected at the international level in the domain of intellectual property (with a patent, model and distinctive mark.

  2. Sliding Control with Chattering Elimination for Hydraulic Drives

    DEFF Research Database (Denmark)

    Schmidt, Lasse; Andersen, Torben Ole; Pedersen, Henrik C.

    2012-01-01

    This paper presents the development of a sliding mode control scheme with chattering elimination, generally applicable for position tracking control of electro-hydraulic valve-cylinder drives. The proposed control scheme requires only common data sheet information, no knowledge on load characteri......This paper presents the development of a sliding mode control scheme with chattering elimination, generally applicable for position tracking control of electro-hydraulic valve-cylinder drives. The proposed control scheme requires only common data sheet information, no knowledge on load...... controller is developed for the control derivative based on a reduced order model. Simulation results demonstrate strong robustness when subjected to parameter perturbations and that chattering is eliminated....

  3. Risk Management - Variance Minimization or Lower Tail Outcome Elimination

    DEFF Research Database (Denmark)

    Aabo, Tom

    2002-01-01

    on future cash flows (the budget), while risk managers concerned about costly lower tail outcomes will hedge (considerably) less depending on the level of uncertainty. A risk management strategy of lower tail outcome elimination is in line with theoretical recommendations in a corporate value......This paper illustrates the profound difference between a risk management strategy of variance minimization and a risk management strategy of lower tail outcome elimination. Risk managers concerned about the variability of cash flows will tend to center their hedge decisions on their best guess......-adding perspective. A cross-case study of blue-chip industrial companies partly supports the empirical use of a risk management strategy of lower tail outcome elimination but does not exclude other factors from (co-)driving the observations....

  4. Hypothyroidism in patients after thyroid elimination by 131I

    International Nuclear Information System (INIS)

    Vana, S.; Nemec, J.; Reisenauer, R.

    1979-01-01

    Patients after elimination of the thyroid gland with radioiodine 131 I develop hypothyroidism only slowly, the peripheral parameters lagging behind the protein bound iodine especially till the fiftieth day after elimination. In young patients the Achilles tendon reflex and the preejection period lag behind symmetrically, in older patients the effect of the supply of thyroid hormones to the skeletal muscles disappear faster, whereas the heart retains the reserves of the thyroid hormones or systems dependent on thyroid hormones affecting the rapidity of myocardial contraction for a relatively longer period of time. Thus, in older patients after elimination of the thyroid gland with radioiodine 131 I the Achilles tendon reflex is a better criterion of hypothyroidism than the preejection period of heart contraction. (author)

  5. In situ measured elimination of Vibrio cholerae from brackish water.

    Science.gov (United States)

    Pérez, María Elena Martínez; Macek, Miroslav; Galván, María Teresa Castro

    2004-01-01

    In situ elimination of fluorescently labelled Vibrio cholerae (FLB) was measured in two saline water bodies in Mexico: in a brackish water lagoon, Mecoacán (Gulf of Mexico; State of Tabasco) and an athalassohaline lake, Alchichica (State of Puebla). Disappearance rates of fluorescently labelled V. cholera O1 showed that they were eliminated from the environment at an average rate of 32% and 63%/day, respectively (based on the bacterial standing stocks). The indirect immunofluorescence method confirmed the presence of V. cholerae O1 in the lagoon. However, the elimination of FLB was not directly related either to the presence or absence of the bacterium in the water body or to the phytoplankton concentration.

  6. Soil-biofilters for elimination of xenobiotics from wastewaters

    DEFF Research Database (Denmark)

    Bester, Kai; Schäfer, D; Janzen, N.

    treatment plants are not designed to eliminate these compounds. Even more of these compounds are discharged by storm waters and combined sewer overflows. It is generally suggested that separating sewers into waste water and rainwater systems might help to improve the situation. However in the last few years...... it has been demonstrated, that storm waters can be heavily polluted with biocides, lubricants and PAHs. In this study we investigated the possibilities to eliminate lipophilic fragrances, bactericides, UV blockers, lubricants etc, as well as more hydrophilic organophosphate flame retardants, biocides...... and other components with low cost soil biofilter techniques suited for on-site decentralised treatment of storm waters and combined sewer overflows. On the other hand the same systems and compounds were tested in for polishing treated waste water in respect of further elimination of xenobiotic compounds....

  7. Biologic phosphorus elimination - influencing parameters, boundary conditions, process optimation

    International Nuclear Information System (INIS)

    Dai Xiaohu.

    1992-01-01

    This paper first presents a systematic study of the basic process of biologic phosphorus elimination as employed by the original 'Phoredox (Main Stream) Process'. The conditions governing the process and the factors influencing its performance were determined by trial operation. A stationary model was developed for the purpose of modelling biologic phosphorus elimination in such a main stream process and optimising the dimensioning. The validity of the model was confirmed by operational data given in the literature and by operational data from the authors' own semitechnical-scale experimental plant. The model permits simulation of the values to be expected for effluent phosphorus and phosphate concentrations for given influent data and boundary conditions. It is thus possible to dimension a plant for accomodation of the original Phoredox (Main Stream) Process or any similar phosphorus eliminating plant that is to work according to the principle of the main stream process. (orig./EF) [de

  8. Rayleigh Instability-Assisted Satellite Droplets Elimination in Inkjet Printing.

    Science.gov (United States)

    Yang, Qiang; Li, Huizeng; Li, Mingzhu; Li, Yanan; Chen, Shuoran; Bao, Bin; Song, Yanlin

    2017-11-29

    Elimination of satellite droplets in inkjet printing has long been desired for high-resolution and precision printing of functional materials and tissues. Generally, the strategy to suppress satellite droplets is to control ink properties, such as viscosity or surface tension, to assist ink filaments in retracting into one drop. However, this strategy brings new restrictions to the ink, such as ink viscosity, surface tension, and concentration. Here, we report an alternative strategy that the satellite droplets are eliminated by enhancing Rayleigh instability of filament at the break point to accelerate pinch-off of the droplet from the nozzle. A superhydrophobic and ultralow adhesive nozzle with cone morphology exhibits the capability to eliminate satellite droplets by cutting the ink filament at breakup point effectively. As a result, the nozzles with different sizes (10-80 μm) are able to print more inks (1 printing electronics and biotechnologies.

  9. Eliminating the Neglected Tropical Diseases: Translational Science and New Technologies.

    Directory of Open Access Journals (Sweden)

    Peter J Hotez

    2016-03-01

    Full Text Available Today, the World Health Organization recognizes 17 major parasitic and related infections as the neglected tropical diseases (NTDs. Despite recent gains in the understanding of the nature and prevalence of NTDs, as well as successes in recent scaled-up preventive chemotherapy strategies and other health interventions, the NTDs continue to rank among the world's greatest global health problems. For virtually all of the NTDs (including those slated for elimination under the auspices of a 2012 London Declaration for NTDs and a 2013 World Health Assembly resolution [WHA 66.12], additional control mechanisms and tools are needed, including new NTD drugs, vaccines, diagnostics, and vector control agents and strategies. Elimination will not be possible without these new tools. Here we summarize some of the key challenges in translational science to develop and introduce these new technologies in order to ensure success in global NTD elimination efforts.

  10. Voltage tunability of thermal conductivity in ferroelectric materials

    Science.gov (United States)

    Ihlefeld, Jon; Hopkins, Patrick Edward

    2016-02-09

    A method to control thermal energy transport uses mobile coherent interfaces in nanoscale ferroelectric films to scatter phonons. The thermal conductivity can be actively tuned, simply by applying an electrical potential across the ferroelectric material and thereby altering the density of these coherent boundaries to directly impact thermal transport at room temperature and above. The invention eliminates the necessity of using moving components or poor efficiency methods to control heat transfer, enabling a means of thermal energy control at the micro- and nano-scales.

  11. Tissue distribution and elimination of rotenone in rainbow trout

    Science.gov (United States)

    Gingerich, W.H.

    1986-01-01

    The fate of a single i.v. dose (120 μg/kg) of the piscicide [14C]rotenone was evaluated in rainbow trout for periods up to 72 h after dosing. Rotenone was rapidly cleared from the plasma; less than 2% of the dose remained in the plasma compartment after 20 min. The highest concentrations of rotenone residues (% dose/g tissue) were in the hepatobiliary system, bile, intestine, and in heart, lateral line swimming muscle, and posterior kidney; tissues that are highly dependent on oxidative metabolism. Although rotenone activity was present in all cell fractions examined, greater than 40% was associated with the mitochondrial fraction of liver, kidney, and muscle. More than 85% of the activity extracted from these tissues, except the liver, was parent rotenone. Elimination from whole body and major tissue depots conformed to simple first-order kinetics; the estimated half-life from whole body was 68.5 h. Branchial elimination accounted for 5% of the injected dose over a 4-h period, and urinary elimination was less than 2% over a 48-h period. Rotenone was eliminated essentially unchanged across the gills; however, parent rotenone was not found in either urine or bile. More than 80% of the activity in both urine and bile eluted from HPLC chromatographs as a highly polar fraction that was not hydrolyzed by incubation with either β-glucuronidase or sulfatase. The results imply that hepatobiliary excretion is the major route of elimination for rotenone residues in the trout and that metabolism to a more polar form is a prerequisite for elimination in both the bile and the urine

  12. Determinants of Human African Trypanosomiasis Elimination via Paratransgenesis.

    Directory of Open Access Journals (Sweden)

    Jennifer A Gilbert

    2016-03-01

    Full Text Available Human African trypanosomiasis (HAT, transmitted by tsetse flies, has historically infected hundreds of thousands of individuals annually in sub-Saharan Africa. Over the last decade, concerted control efforts have reduced reported cases to below 10,000 annually, bringing complete elimination within reach. A potential technology to eliminate HAT involves rendering the flies resistant to trypanosome infection. This approach can be achieved through the introduction of transgenic Sodalis symbiotic bacteria that have been modified to produce a trypanocide, and propagated via Wolbachia symbionts, which confer a reproductive advantage to the paratransgenic tsetse. However, the population dynamics of these symbionts within tsetse flies have not yet been evaluated. Specifically, the key factors that determine the effectiveness of paratransgenesis have yet to be quantified. To identify the impact of these determinants on T.b. gambiense and T.b. rhodesiense transmission, we developed a mathematical model of trypanosome transmission that incorporates tsetse and symbiont population dynamics. We found that fecundity and mortality penalties associated with Wolbachia or recombinant Sodalis colonization, probabilities of vertical transmission, and tsetse migration rates are fundamental to the feasibility of HAT elimination. For example, we determined that HAT elimination could be sustained over 25 years when Wolbachia colonization minimally impacted fecundity or mortality, and when the probability of recombinant Sodalis vertical transmission exceeded 99.9%. We also found that for a narrow range of recombinant Sodalis vertical transmission probability (99.9-90.6% for T.b. gambiense and 99.9-85.8% for T.b. rhodesiense, cumulative HAT incidence was reduced between 30% and 1% for T.b. gambiense and between 21% and 3% for T.b. rhodesiense, although elimination was not predicted. Our findings indicate that fitness and mortality penalties associated with paratransgenic

  13. Thermal stability of homo- and copolymers of vinyl fluoride

    International Nuclear Information System (INIS)

    Raucher, D.; Levy, M.

    1979-01-01

    The thermal stability of poly(vinyl fluoride)(PVF) was studied by thermal gravimetry and mass spectrometry (TGA and TGA-MS). In low-molecular-weight polymers a two-step decomposition pattern was observed. It consisted of the dehydrofluorination to a polyene chain followed by decomposition of the resulting polyene at higher temperatures. Copolymers of vinyl fluoride-vinyl acetate (VF-VAc) and vinyl fluoride-vinyl chloride (VF-VCl) showed a simultaneous evolution of hydrofluoric acid and acetic acid and hydrofluoric acid and hydrochloric acid, respectively. This suggests that after the elimination of the weakest link a spontaneous elimination of neighboring HF molecules takes place

  14. Use of gamma radiation to eliminate fungi from wood

    International Nuclear Information System (INIS)

    Freitag, C.M.; Morrell, J.J.

    1998-01-01

    The use of gamma irradiation for eliminating pests from imported wood products was investigated, using ponderosa pine blocks colonized by Aspergillus niger, Ophiostoma piceae, O. perfectum, Penicillium spp., Phlebia subserialis, or Postia placenta. While previous studies suggest that a dosage of 2.5 Mrads is required to eliminate fungi from wood, only one isolation was made from wafers exposed to 1.5 Mrad. This suggests that lower dosages may be adequate for mitigating pests in wood, although further studies using other fungi are recommended

  15. Feasibility and roadmap analysis for malaria elimination in China.

    Science.gov (United States)

    Zhou, Xiao-Nong; Xia, Zhi-Gui; Wang, Ru-Bo; Qian, Ying-Jun; Zhou, Shui-Sen; Utzinger, Jürg; Tanner, Marcel; Kramer, Randall; Yang, Wei-Zhong

    2014-01-01

    To understand the current status of the malaria control programme at the county level in accordance with the criteria of the World Health Organisation, the gaps and feasibility of malaria elimination at the county and national levels were analysed based on three kinds of indicators: transmission capacity, capacity of the professional team, and the intensity of intervention. Finally, a roadmap for national malaria elimination in the People's Republic of China is proposed based on the results of a feasibility assessment at the national level. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Eliminating the Influence of Harmonic Components in Operational Modal Analysis

    DEFF Research Database (Denmark)

    Jacobsen, Niels-Jørgen; Andersen, Palle; Brincker, Rune

    2007-01-01

    structures, in contrast, are subject inherently to deterministic forces due to the rotating parts in the machinery. These forces are seen as harmonic components in the responses, and their influence should be eliminated before extracting the modes in their vicinity. This paper describes a new method based...... on the well-known Enhanced Frequency Domain Decomposition (EFDD) technique for eliminating these harmonic components in the modal parameter extraction process. For assessing the quality of the method, various experiments were carried out where the results were compared with those obtained with pure stochastic...

  17. Dual-Laser vibrometry: Elimination or extraction of pseudo vibration

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Bækbo, Martin Jesper; Hanson, Steen Grüner

    2014-01-01

    This paper investigates the principal idea of a method using two identical laser vibrometers to eliminate pseudovibrations, occurring as structured noise in laser-vibrometer measurements of angular velocity of a rotating object. Thetwo vibrometers monitor the same surface path on the rotating...... in angularvelocity of the object occur simultaneously at the two vibrometers. Knowing the angular separation between thevibrometers, simple trigonometry canbe used to eliminate the pseudo vibrations. These vibrometers are based oncameras, therefore the experiments demonstrate the principle of the method only...

  18. Eliminating Undesirable Variation in Neonatal Practice: Balancing Standardization and Customization.

    Science.gov (United States)

    Balakrishnan, Maya; Raghavan, Aarti; Suresh, Gautham K

    2017-09-01

    Consistency of care and elimination of unnecessary and harmful variation are underemphasized aspects of health care quality. This article describes the prevalence and patterns of practice variation in health care and neonatology; discusses the potential role of standardization as a solution to eliminating wasteful and harmful practice variation, particularly when it is founded on principles of evidence-based medicine; and proposes ways to balance standardization and customization of practice to ultimately improve the quality of neonatal care. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Exposure to radon in Sweden dwellings - attitudes and elimination

    International Nuclear Information System (INIS)

    Jansson, B.; Tholander, M.; Axelson, O.

    1989-01-01

    Owners of 208 dwellings with radon daughter concentrations of 400 Bq/m 3 EER or above were asked about attitudes and measures toward elimination via mailed questionnaires. The response rate was 88% and some steps toward elimination had been taken in 83 dwellings. For the remaining houses, no improvements had been made either because of financial problems, lack of technical advice, or doubts about radon daughter exposure as a health hazard. The results of this study suggest the need to more definitely assess the risk through epidemiologic studies, as well as to provide more information about technical solutions and financial support to house owners

  20. Rabies Elimination in Dogs in the United States

    Centers for Disease Control (CDC) Podcasts

    2008-12-01

    Rabies has been eliminated from dogs in the United States through efforts to promote annual vaccination, but it's still a problem in wildlife in the U.S. and in wild and domesticated animals abroad. In this podcast, CDC's Dr. Charles Rupprecht discusses a study which provides proof of the elimination of rabies in dogs and what this means for the average American.  Created: 12/1/2008 by Emerging Infectious Diseases.   Date Released: 12/1/2008.

  1. 演奏技巧的选择——以巴托克的小提琴独奏曲《罗马尼亚舞曲》为例%The Choice of Performance Techniques --A Case Study of Bartok's Violin Solo "Romanian Folk Dances"

    Institute of Scientific and Technical Information of China (English)

    姜慧

    2012-01-01

    In the process of violin performance, to master the standardized techniques and skills is the basis and prerequisite for playing a work well. However, with the accumulation in history, it has become one of the problems we violin teachers have to pay attention to that we should make selections in terms of works and use performance skills appropriately on the basis of the type, structure, age, different emotions and different contents of a specific music composition, so as to help students express the emotion and the connotation of the music composition more accurately and in a better way. This paper, taking Bartok's "Romanian Folk Dances" as an example, explores how to select playing skills according to specific works.%在小提琴演奏中,掌握规范的技术技巧是演奏好一部作品的基础和前提。但因历史的积累,以具体乐曲的体裁、结构、时代、风格以及不同情绪、不同内容为依据,恰当地根据作品选择和运用演奏技巧,以便更好地帮助学生较准确地表现音乐作品的情感和内涵是我们从事小提琴演奏教学的教师必须重视的问题之一。文章仅以巴托克的《罗马尼亚舞曲》为例,探讨如何根据具体作品选择演奏技巧这一问题。

  2. Toward rubella elimination in Poland: need for supplemental immunization activities, enhanced surveillance, and further integration with measles elimination efforts.

    Science.gov (United States)

    Zimmerman, Laura; Rogalska, Justyna; Wannemuehler, Kathleen A; Haponiuk, Marzena; Kosek, Adam; Pauch, Ewa; Plonska, Elzbieta; Veltze, Daniel; Czarkowski, Miroslaw P; Buddh, Nilesh; Reef, Susan; Stefanoff, Pawel

    2011-07-01

    All Member States of the World Health Organization (WHO) European Region have endorsed rubella elimination and congenital rubella syndrome (CRS) prevention. However, Poland has continued high levels of reported rubella. We reviewed rubella incidence in Poland since 1966 and analyzed national aggregated surveillance data from the period 2003-2008 and case-based data from 4 provinces from the period 2006-2008. We described CRS cases since 1997 and assessed maternal receipt of vaccine. We reviewed national vaccination coverage from 1992 through 2008. Since 1966, rubella outbreaks have occurred every 4-6 years in Poland. Aggregate and case-based data from the period 2003-2008 indicate that rubella virus transmission has occurred across wide age ranges (from continues. To achieve rubella elimination, supplemental immunization activities among adolescent boys are needed, as is integration with measles elimination efforts. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2011.

  3. Heat treatment eliminates 'Candidatus Liberibacter asiaticus' from infected citrus trees under controlled conditions.

    Science.gov (United States)

    Hoffman, Michele T; Doud, Melissa S; Williams, Lisa; Zhang, Mu-Qing; Ding, Fang; Stover, Ed; Hall, David; Zhang, Shouan; Jones, Lisa; Gooch, Mark; Fleites, Laura; Dixon, Wayne; Gabriel, Dean; Duan, Yong-Ping

    2013-01-01

    Huanglongbing (HLB) is one of the most destructive diseases of citrus worldwide. The three known causal agents of HLB are species of α-proteobacteria: 'Candidatus Liberibacter asiaticus', 'Ca. L. africanus', and 'Ca. L. americanus'. Previous studies have found distinct variations in temperature sensitivity and tolerance among these species. Here, we describe the use of controlled heat treatments to cure HLB caused by 'Ca. L. asiaticus', the most prevalent and heat-tolerant species. Using temperature-controlled growth chambers, we evaluated the time duration and temperature required to suppress or eliminate the 'Ca. L. asiaticus' bacterium in citrus, using various temperature treatments for time periods ranging from 2 days to 4 months. Results of quantitative polymerase chain reaction (qPCR) after treatment illustrate significant decreases in the 'Ca. L. asiaticus' bacterial titer, combined with healthy vigorous growth by all surviving trees. Repeated qPCR testing confirmed that previously infected, heat-treated plants showed no detectable levels of 'Ca. L. asiaticus', while untreated control plants remained highly infected. Continuous thermal exposure to 40 to 42°C for a minimum of 48 h was sufficient to significantly reduce titer or eliminate 'Ca. L. asiaticus' bacteria entirely in HLB-affected citrus seedlings. This method may be useful for the control of 'Ca. Liberibacter'-infected plants in nursery and greenhouse settings.

  4. Dynamics of H sub 2 elimination from unsaturated hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Cromwell, E.F.

    1991-02-01

    State-of-the-art laser and molecular beam techniques are used to study the dynamics of H{sub 2} elimination from 1,4-cyclohexadiene and ethylene. Information on the transition state configurations and the dynamics of the dissociation processes for these reactions is reported. 152 refs., 54 figs., 12 tabs.

  5. College Choice in a Brand Elimination Framework: The Administrator's Perspective.

    Science.gov (United States)

    Rosen, Deborah E.; Curran, James M.; Greenlee, Timothy B.

    1998-01-01

    Through a survey of business programs, a study examined the nature and extent of student recruiting activities and classified them according to a "brand elimination" model. Timing and methods of recruiting were then compared to reports of enrollment changes. Results suggest that targeted recruitment activities aimed at creating awareness…

  6. Eliminating gender-based violence: learning from the widowhood ...

    African Journals Online (AJOL)

    Gender-based violence has received increased international focus since after the International Conference on Population and Development in Cairo 1994 and the Fourth World Conference on Women in Beijing in 1995. This paper reports the activities and outcome of a Christian women group initiative to eliminate ...

  7. Impact of the WHO Technical Support Towards Malaria Elimination ...

    African Journals Online (AJOL)

    Background: Zambia's National Malaria Strategic Plan (NMSP) 2011-2016 aims to eliminate malaria by the year 2020. The WHO Country Office is supporting Zambia in its goal to attain this national target earlier than the global goal contained in Global Technical Strategy (GTS) 2016- 2030. WHO's focus is to accelerate ...

  8. Poverty and elimination of urban health disparities: challenge and opportunity.

    Science.gov (United States)

    Thomas, Stephen B; Quinn, Sandra Crouse

    2008-01-01

    The aim of this article is to examine the intersection of race and poverty, two critical factors fueling persistent racial and ethnic health disparities among urban populations. From the morass of social determinants that shape the health of racial and ethnic communities in our urban centers, we will offer promising practices and potential solutions to eliminating racial and ethnic health disparities.

  9. Find TB. Treat TB. Working together to eliminate TB.

    Centers for Disease Control (CDC) Podcasts

    2014-02-26

    In this podcast, Dr. Sundari Mase, Medical Team Lead in the Field Services and Evaluation Branch in the Division of Tuberculosis Elimination, discusses World TB Day and the 2014 theme.  Created: 2/26/2014 by National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP).   Date Released: 2/26/2014.

  10. Bridging Implementation, Knowledge, and Ambition Gaps to Eliminate Tuberculosis

    Centers for Disease Control (CDC) Podcasts

    2011-02-22

    In this podcast, Dr. Kenneth Castro, director of CDC's Division of Tuberculosis Eliminatio,discusses bridging implementation, knowledge, and ambition gaps to eliminate tuberculosis.  Created: 2/22/2011 by National Center for Emerging Zoonotic and Infectious Diseases (NCEZID).   Date Released: 3/2/2011.

  11. Dual-laser vibrometry: elimination or extraction of pseudovibration

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Bækbo, Martin Jesper; Hanson, Steen Grüner

    2015-01-01

    The principal idea of a method using two identical laser vibrometers to eliminate pseudovibrations occurring as structured noise in laser-vibrometer measurements of angular velocity of a rotating object is investigated. The two vibrometers monitor the same surface path on the rotating object...

  12. Improvements in Elimination of Loudspeaker Distortion in Acoustic Measurements

    DEFF Research Database (Denmark)

    Agerkvist, Finn T.; Torras Rosell, Antoni; McWalter, Richard Ian

    2015-01-01

    This paper investigates the influence of nonlinear components that contaminate the linear response of acoustic transducers, and presents improved methods for eliminating the influence of nonlinearities in acoustic measurements. The method is evaluated with pure sinusoidal signals as well as swept...

  13. Graphical reduction of reaction networks by linear elimination of species

    DEFF Research Database (Denmark)

    Saez Cornellana, Meritxell; Wiuf, Carsten; Feliu, Elisenda

    2017-01-01

    We give a graphically based procedure to reduce a reaction network to a smaller reaction network with fewer species after linear elimination of a set of noninteracting species. We give a description of the reduced reaction network, its kinetics and conservations laws, and explore properties...

  14. Generating Nice Linear Systems for Matrix Gaussian Elimination

    Science.gov (United States)

    Homewood, L. James

    2004-01-01

    In this article an augmented matrix that represents a system of linear equations is called nice if a sequence of elementary row operations that reduces the matrix to row-echelon form, through matrix Gaussian elimination, does so by restricting all entries to integers in every step. Many instructors wish to use the example of matrix Gaussian…

  15. Eliminative Argumentation: A Basis for Arguing Confidence in System Properties

    Science.gov (United States)

    2015-02-01

    why a system works (cf. Popper’s critical rationalism [ Popper 1963]). In short, with eliminative induction, we learn something concrete about why a...Cambridge University Press, 2008. [ Popper 1963] Popper , K. Conjectures and Refutations: The Growth of Scientific Knowledge. Routledge, 1963

  16. The challenge of the global elimination of iodine deficiency disorders.

    NARCIS (Netherlands)

    Haar, van der F.

    1997-01-01

    Most nations of the world are well positioned for success in their pursuit of the virtual elimination of iodine deficiency disorders (IDD) by the year 2000. In 1990 at the World Summit for Children, Heads of State and Government had agreed on this global goal and in 1992 at the International

  17. Elimination diets in the management of eosinophilic esophagitis

    Directory of Open Access Journals (Sweden)

    Wechsler JB

    2014-05-01

    Full Text Available Joshua B Wechsler, Sally Schwartz, Katie Amsden, Amir F Kagalwalla Department of Pediatrics, Division of Gastroenterology, Hepatology and Nutrition, Ann & Robert H. Lurie Children's Hospital of Chicago, IL, USA Abstract: Eosinophilic esophagitis, an increasingly recognized chronic inflammatory disorder isolated to the esophagus, is triggered by an abnormal allergic response to dietary antigens. Current treatment includes swallowed topical steroids and dietary modification, which aim to resolve symptoms and prevent long-term complications such as formation of strictures. The dietary approach has become more widely accepted because long-term steroid therapy is associated with potential risks. Dietary treatment includes elemental and elimination diets. An exclusive elemental diet, which requires replacement of all intact protein with amino acid-based formula, offers the best response of all available therapies, with remission in up to 96% of subjects proving it to be superior to all other available therapies including topical steroids. However, compliance with this approach is challenging because of poor taste and monotony. The high cost of formula and the associated psychosocial problems are additional drawbacks of this approach. Empiric and allergy test-directed elimination diets have gained popularity given that elimination of a limited number of foods is much easier and as such is more readily acceptable. There is a growing body of literature supporting this type of therapy in both children and adults. This paper reviews the evidence for all types of dietary therapy in eosinophilic esophagitis. Keywords: eosinophilic esophagitis, dietary therapy, empiric elimination, elemental, allergy test-directed

  18. Analysis reveals potential rangeland impacts if Williamson Act eliminated

    Directory of Open Access Journals (Sweden)

    William C. Wetzel

    2012-10-01

    Full Text Available California budget cuts have resulted in dramatic reductions in state funding for the Williamson Act, a land protection program that reduces property taxes for the owners of 15 million acres of California farms and rangeland. With state reimbursements to counties eliminated, the decision to continue Williamson Act contracts lies with individual counties. We investigated the consequences of eliminating the Williamson Act, using a geospatial analysis and a mail questionnaire asking ranchers for plans under a hypothetical elimination scenario. The geospatial analysis revealed that 72% of rangeland parcels enrolled in Williamson Act contracts contained habitat important for statewide conservation goals. Presented with the elimination scenario, survey respondents reported an intention to sell 20% of their total 496,889 acres. The tendency of survey participants to respond that they would sell land was highest among full-time ranchers with low household incomes and without off-ranch employment. A majority (76% of the ranchers who reported that they would sell land predicted that the buyers would develop it for nonagricultural uses, suggesting substantial changes to California's landscape in a future without the Williamson Act.

  19. Elimination of used sources. Taking over and storage

    International Nuclear Information System (INIS)

    Desroches, J.

    1982-02-01

    The waste disposal of sealed radioactive sources used in medicine and industry poses technical problems for high activity sources and economic problems for small sources. Some cases of large radioactive sources elimination are reviewed and the formalities to be completed for the waste disposal of sources in general are briefly described [fr

  20. Developing cryotherapy to eliminate graft-transmissible pathogens in citrus

    Science.gov (United States)

    This article summarizes research being conducted as part of a project funded by the California Citrus Research Board to develop cryotherapy (freezing buds in liquid nitrogen, and then recovering them) as a viable method for elimination of graft transmissible pathogens from Citrus. There are current...

  1. Information Systems to Support Surveillance for Malaria Elimination

    Science.gov (United States)

    Ohrt, Colin; Roberts, Kathryn W.; Sturrock, Hugh J. W.; Wegbreit, Jennifer; Lee, Bruce Y.; Gosling, Roly D.

    2015-01-01

    Robust and responsive surveillance systems are critical for malaria elimination. The ideal information system that supports malaria elimination includes: rapid and complete case reporting, incorporation of related data, such as census or health survey information, central data storage and management, automated and expert data analysis, and customized outputs and feedback that lead to timely and targeted responses. Spatial information enhances such a system, ensuring cases are tracked and mapped over time. Data sharing and coordination across borders are vital and new technologies can improve data speed, accuracy, and quality. Parts of this ideal information system exist and are in use, but have yet to be linked together coherently. Malaria elimination programs should support the implementation and refinement of information systems to support surveillance and response and ensure political and financial commitment to maintain the systems and the human resources needed to run them. National malaria programs should strive to improve the access and utility of these information systems and establish cross-border data sharing mechanisms through the use of standard indicators for malaria surveillance. Ultimately, investment in the information technologies that support a timely and targeted surveillance and response system is essential for malaria elimination. PMID:26013378

  2. Women's toileting behaviour related to urinary elimination: concept analysis.

    Science.gov (United States)

    Wang, Kefang; Palmer, Mary H

    2010-08-01

    This paper is a report of analysis of the concept of women's toileting behaviour related to urinary elimination. Behaviours related to emptying urine from the bladder can contribute to bladder health problems. Evidence exists that clinical interventions focusing on specific behaviours that promote urine storage and controlled emptying are effective in reducing lower urinary tract symptoms. The concept of women's toileting behaviour related to urinary elimination has not been well-developed to guide nursing research and intervention. The CINAHL, Medline, PsycInfo and ISI Citation databases were searched for publications between January, 1960 and May, 2009, using combinations of keywords related to women's toileting behaviour. Additional publications were identified by examining the reference lists in the papers identified. Johnson's behavioural system model provided the conceptual framework to identify the concept. Walker and Avant's method was used for this concept analysis. Women's toileting behaviour related to urinary elimination can be defined as voluntary actions related to the physiological event of emptying the bladder, which is comprised of specific attributes including voiding place, voiding time, voiding position and voiding style. This behaviour is also influenced by the physical and social environments. An explicit definition of women's toileting behaviour can offer a basis for nurses to understand the factors involved in women's toileting behaviour. It also facilitates the development of an instrument to assess women's toileting behaviour better, and to facilitate development of behavioural interventions designed to prevent, eliminate, reduce and manage female lower urinary tract symptoms.

  3. Virtual Elimination of Mother‑to‑Child Transmission of Human ...

    African Journals Online (AJOL)

    CD4 cell counts, and prolonged breastfeeding were implicated in MTCT of HIV in the era of ... of mother to child transmission (PMTCT) of human immunodeficiency virus (HIV), virtual elimination of mother to child ... The babies were tested for HIV using deoxyribo nucleic acid polymerase chain reaction test at 6 weeks, and ...

  4. Eliminating gas overflows at the Alansk deposit. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Tulyagonov, Kh.T.; Chernopyatov, V.G.; Normatov, A.N.; Rakhimov, A.K.; Strelko, I.Sh.; Telegin, V.V.

    1981-01-01

    Causes for the appearance of gas overflows from the 15th producing horizon of the Jurassic deposits from AVPD (2834 m) to the 9th horizon of Senoman deposits (1275-1297 m range) occurring as a result of the breakdown at the 219-mm intermediate column at a depth of 1350 m, along with operations performed to eliminate these overflows, are described.

  5. Eliminating graphs by means of parallel knock-out schemes

    NARCIS (Netherlands)

    Broersma, H.J.; Fomin, F.V.; Královic, R.; Woeginger, G.J.

    2007-01-01

    In 1997 Lampert and Slater introduced parallel knock-out schemes, an iterative process on graphs that goes through several rounds. In each round of this process, every vertex eliminates exactly one of its neighbors. The parallel knock-out number of a graph is the minimum number of rounds after which

  6. Eliminating graphs by means of parallel knock-out schemes

    NARCIS (Netherlands)

    Broersma, Haitze J.; Fomin, F.V.; Královič, R.; Woeginger, Gerhard

    In 1997 Lampert and Slater introduced parallel knock-out schemes, an iterative process on graphs that goes through several rounds. In each round of this process, every vertex eliminates exactly one of its neighbors. The parallel knock-out number of a graph is the minimum number of rounds after which

  7. Tuberculosis elimination in the post Millennium Development Goals era

    DEFF Research Database (Denmark)

    Wejse, Christian

    2015-01-01

    The Millennium Development Goal for tuberculosis (TB) is to stop the increase in incidence and halve the mortality of TB between 1990 and 2015. This goal has now been reached on a global scale, although not in the most affected region of Africa. The new target is TB elimination, defined as one case...

  8. Information systems to support surveillance for malaria elimination.

    Science.gov (United States)

    Ohrt, Colin; Roberts, Kathryn W; Sturrock, Hugh J W; Wegbreit, Jennifer; Lee, Bruce Y; Gosling, Roly D

    2015-07-01

    Robust and responsive surveillance systems are critical for malaria elimination. The ideal information system that supports malaria elimination includes: rapid and complete case reporting, incorporation of related data, such as census or health survey information, central data storage and management, automated and expert data analysis, and customized outputs and feedback that lead to timely and targeted responses. Spatial information enhances such a system, ensuring cases are tracked and mapped over time. Data sharing and coordination across borders are vital and new technologies can improve data speed, accuracy, and quality. Parts of this ideal information system exist and are in use, but have yet to be linked together coherently. Malaria elimination programs should support the implementation and refinement of information systems to support surveillance and response and ensure political and financial commitment to maintain the systems and the human resources needed to run them. National malaria programs should strive to improve the access and utility of these information systems and establish cross-border data sharing mechanisms through the use of standard indicators for malaria surveillance. Ultimately, investment in the information technologies that support a timely and targeted surveillance and response system is essential for malaria elimination. © The American Society of Tropical Medicine and Hygiene.

  9. A retrieval-based approach to eliminating hindsight bias.

    Science.gov (United States)

    Van Boekel, Martin; Varma, Keisha; Varma, Sashank

    2017-03-01

    Individuals exhibit hindsight bias when they are unable to recall their original responses to novel questions after correct answers are provided to them. Prior studies have eliminated hindsight bias by modifying the conditions under which original judgments or correct answers are encoded. Here, we explored whether hindsight bias can be eliminated by manipulating the conditions that hold at retrieval. Our retrieval-based approach predicts that if the conditions at retrieval enable sufficient discrimination of memory representations of original judgments from memory representations of correct answers, then hindsight bias will be reduced or eliminated. Experiment 1 used the standard memory design to replicate the hindsight bias effect in middle-school students. Experiments 2 and 3 modified the retrieval phase of this design, instructing participants beforehand that they would be recalling both their original judgments and the correct answers. As predicted, this enabled participants to form compound retrieval cues that discriminated original judgment traces from correct answer traces, and eliminated hindsight bias. Experiment 4 found that when participants were not instructed beforehand that they would be making both recalls, they did not form discriminating retrieval cues, and hindsight bias returned. These experiments delineate the retrieval conditions that produce-and fail to produce-hindsight bias.

  10. Tritium formation and elimination in light-water reactors

    International Nuclear Information System (INIS)

    Dolle, L.; Briec, M.; Miquel, P.

    1976-01-01

    Light-water reactors have a tritium balance which should be considered from both the working constraint and environmental pollution aspects. The formation of tritium in the primary circuit and in the fuel, the elimination and enrichment processes are considered [fr

  11. Elimination of salmonella from fermented pork by gamma irradiation

    International Nuclear Information System (INIS)

    Noochpramul, K.; Loaharanu, P.

    1974-01-01

    A fermented pork product, locally known as ''Nham'', is usually contaminated with salmonella and occasionally with Trichinella spiralis and Taenea solium. This product is always eaten raw as cooking destroys its delicate flavour. A survey made on the MPN of salmonella revealed that much less than 100 salmonella was found in one gram of the product. Nham was inoculated with S. derby, S. anatum, S. newport, or S. paratyphi B, the most common serotypes of salmonella found in this product, at 10 6 , 10 4 , or 10 2 per gram. The inoculated product was irradiated by the gamma beam-650 Co-60 irradiator at 0, 0.1, 0.2, 0.3 or 0.4 Mrad. Dosage at 0.4 Mrad eliminated salmonella as much as 10 6 per g; 0.3 Mrad eliminated 10 6 /g of S. newport and S. paratyphi B and 10 4 /g of S. derby and S. anatum; and 0.2 Mrad eliminated 10 2 /g of all serotypes of salmonella in the product. No changes in the organoleptic properties of irradiated Nham was found when irradiated at 0.3 Mrad or less. Dosage at 0.2 Mrad appeared to be sufficient for commercial irradiation of Nham for the elimination of salmonella

  12. Lysophosphatidic acid metabolism and elimination in cardiovascular disease

    Science.gov (United States)

    Salous, Abdelghaffar Kamal

    The bioactive lipids lysophosphatidic acid (LPA) and sphingosine 1-phosphate (S1P) are present in human and mouse plasma at a concentration of ~0.1-1 microM and regulate physiological and pathophysiological processes in the cardiovascular system including atherothrombosis, intimal hyperplasia, and immune function, edema formation, and permeability. PPAP2B, the gene encoding LPP3, a broad activity integral membrane enzyme that terminates LPA actions in the vasculature, has a single nucleotide polymorphism that been recently associated with coronary artery disease risk. The synthesis and signaling of LPA and S1P in the cardiovascular system have been extensively studied but the mechanisms responsible for their elimination are less well understood. The broad goal of this research was to examine the role of LPP3 in the termination of LPA signaling in models of cardiovascular disease involving vascular wall cells, investigate the role of LPP3 in the elimination of plasma LPA, and further characterize the elimination of plasma LPA. The central hypothesis is that LPP3 plays an important role in attenuating the pathological responses to LPA signaling and that it mediates the elimination of exogenously applied bioactive lipids from the plasma. These hypotheses were tested using molecular biological approaches, in vitro studies, synthetic lysophospholipid mimetics, modified surgical procedures, and mass spectrometry assays. My results indicated that LPP3 played a critical role in attenuating LPA signaling mediating the pathological processes of intimal hyperplasia and vascular leak in mouse models of disease. Additionally, enzymatic inactivation of lysophospholipids by LPP and PLA enzymes in the plasma was not a primary mechanism for the rapid elimination of plasma LPA and S1P. Instead, evidence strongly suggested a transcellular uptake mechanism by hepatic non-parenchymal cells as the predominant mechanism for elimination of these molecules. These results support a model in

  13. Human movement data for malaria control and elimination strategic planning.

    Science.gov (United States)

    Pindolia, Deepa K; Garcia, Andres J; Wesolowski, Amy; Smith, David L; Buckee, Caroline O; Noor, Abdisalan M; Snow, Robert W; Tatem, Andrew J

    2012-06-18

    Recent increases in funding for malaria control have led to the reduction in transmission in many malaria endemic countries, prompting the national control programmes of 36 malaria endemic countries to set elimination targets. Accounting for human population movement (HPM) in planning for control, elimination and post-elimination surveillance is important, as evidenced by previous elimination attempts that were undermined by the reintroduction of malaria through HPM. Strategic control and elimination planning, therefore, requires quantitative information on HPM patterns and the translation of these into parasite dispersion. HPM patterns and the risk of malaria vary substantially across spatial and temporal scales, demographic and socioeconomic sub-groups, and motivation for travel, so multiple data sets are likely required for quantification of movement. While existing studies based on mobile phone call record data combined with malaria transmission maps have begun to address within-country HPM patterns, other aspects remain poorly quantified despite their importance in accurately gauging malaria movement patterns and building control and detection strategies, such as cross-border HPM, demographic and socioeconomic stratification of HPM patterns, forms of transport, personal malaria protection and other factors that modify malaria risk. A wealth of data exist to aid filling these gaps, which, when combined with spatial data on transport infrastructure, traffic and malaria transmission, can answer relevant questions to guide strategic planning. This review aims to (i) discuss relevant types of HPM across spatial and temporal scales, (ii) document where datasets exist to quantify HPM, (iii) highlight where data gaps remain and (iv) briefly put forward methods for integrating these datasets in a Geographic Information System (GIS) framework for analysing and modelling human population and Plasmodium falciparum malaria infection movements.

  14. Human movement data for malaria control and elimination strategic planning

    Directory of Open Access Journals (Sweden)

    Pindolia Deepa K

    2012-06-01

    Full Text Available Abstract Recent increases in funding for malaria control have led to the reduction in transmission in many malaria endemic countries, prompting the national control programmes of 36 malaria endemic countries to set elimination targets. Accounting for human population movement (HPM in planning for control, elimination and post-elimination surveillance is important, as evidenced by previous elimination attempts that were undermined by the reintroduction of malaria through HPM. Strategic control and elimination planning, therefore, requires quantitative information on HPM patterns and the translation of these into parasite dispersion. HPM patterns and the risk of malaria vary substantially across spatial and temporal scales, demographic and socioeconomic sub-groups, and motivation for travel, so multiple data sets are likely required for quantification of movement. While existing studies based on mobile phone call record data combined with malaria transmission maps have begun to address within-country HPM patterns, other aspects remain poorly quantified despite their importance in accurately gauging malaria movement patterns and building control and detection strategies, such as cross-border HPM, demographic and socioeconomic stratification of HPM patterns, forms of transport, personal malaria protection and other factors that modify malaria risk. A wealth of data exist to aid filling these gaps, which, when combined with spatial data on transport infrastructure, traffic and malaria transmission, can answer relevant questions to guide strategic planning. This review aims to (i discuss relevant types of HPM across spatial and temporal scales, (ii document where datasets exist to quantify HPM, (iii highlight where data gaps remain and (iv briefly put forward methods for integrating these datasets in a Geographic Information System (GIS framework for analysing and modelling human population and Plasmodium falciparum malaria infection movements.

  15. Elimination behavior of shelter dogs housed in double compartment kennels.

    Directory of Open Access Journals (Sweden)

    Denae Wagner

    Full Text Available For animals in confinement housing the housing structure has tremendous potential to impact well being. Dogs in animal shelters are often housed in one of two types of confinement housing - single kennels and rooms or double compartment kennels and rooms most often separated by a guillotine door. This study examines the effect of housing on the location of elimination behavior in dogs housed in double compartment kennels were the majority of the dogs were walked daily. One side of the kennel contained the food, water and bed and the other side was empty and available except during cleaning time. Location of urination and defecation was observed daily for 579 dogs housed in indoor double compartment kennels for a total of 4440 days of observation. There were 1856 days (41.9% when no elimination was noted in the kennel. Feces, urine or both were observed in the kennel on 2584 days (58.1%. When elimination occurred in the kennel the probability of fecal elimination on the opposite side of the bed/food/water was 72.5% (95% CI 69.05% to 75.69%. The probability of urination on the opposite side of the bed/food/water was 77.4% (95% CI 74.33% to 80.07%. This study demonstrates the strong preference of dogs to eliminate away from the area where they eat, drink and sleep. Double compartment housing not only allows this - it allows staff the ability to provide safe, efficient, humane daily care and confers the added benefits of reducing risks for disease transmission for the individual dog as well as the population.

  16. Pulsed power supply and coaxial reactor applied to E. coli elimination in water by pulsed dielectric barrier discharge

    Energy Technology Data Exchange (ETDEWEB)

    Quiroz V, V. E.; Lopez C, R.; Rodriguez M, B. G.; Pena E, R.; Mercado C, A.; Valencia A, R.; Hernandez A, A. N.; Barocio, S. R.; Munoz C, A. E. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); De la Piedad B, A., E-mail: regulo.lopez@inin.gob.mx [Instituto Tecnologico de Toluca, Av. Tecnologico s/n, Ex-Rancho La Virgen, 52140 Metepec, Estado de Mexico (Mexico)

    2013-07-01

    The design and instrumentation intended for ATTC8739 Escherichia coli (E. coli) bacteria elimination in water, based on non thermal plasma generation at room pressure have been carried out by means of dielectric pulsed discharges. The latter have been produced by a power supply capable of providing voltages up to the order of 45 kV, 1-500 {mu}s pulse widths and variable frequencies between 100 Hz to 2000 Hz. This supply feeds a coaxial discharge reactor of the simple dielectric barrier type. The adequate operation of the system has been tested with the elimination of E. coli at 10{sup 4} and 10{sup 6} bacteria/ml concentrations, leading to reductions up to 85.3% and 95.1%, respectively, during the first 30 min of treatment. (Author)

  17. Measurement of thermal conductivity of Bi2Te3 nanowire using high-vacuum scanning thermal wave microscopy

    Science.gov (United States)

    Park, Kyungbae; Hwang, Gwangseok; Kim, Hayeong; Kim, Jungwon; Kim, Woochul; Kim, Sungjin; Kwon, Ohmyoung

    2016-02-01

    With the increasing application of nanomaterials in the development of high-efficiency thermoelectric energy conversion materials and electronic devices, the measurement of the intrinsic thermal conductivity of nanomaterials in the form of nanowires and nanofilms has become very important. However, the current widely used methods for measuring thermal conductivity have difficulties in eliminating the influence of interfacial thermal resistance (ITR) during the measurement. In this study, by using high-vacuum scanning thermal wave microscopy (HV-STWM), we propose a quantitative method for measuring the thermal conductivity of nanomaterials. By measuring the local phase lag of high-frequency (>10 kHz) thermal waves passing through a nanomaterial in a high-vacuum environment, HV-STWM eliminates the measurement errors due to ITR and the distortion due to heat transfer through air. By using HV-STWM, we measure the thermal conductivity of a Bi2Te3 nanowire. Because HV-STWM is quantitatively accurate and its specimen preparation is easier than in the thermal bridge method, we believe that HV-STWM will be widely used for measuring the thermal properties of various types of nanomaterials.

  18. Thermal-hydraulic unreliability of passive systems

    International Nuclear Information System (INIS)

    Tzanos, C.P.; Saltos, N.T.

    1995-01-01

    Advanced light water reactor designs like AP600 and the simplified boiling water reactor (SBWR) use passive safety systems for accident prevention and mitigation. Because these systems rely on natural forces for their operation, their unavailability due to hardware failures and human error is significantly smaller than that of active systems. However, the coolant flows predicted to be delivered by these systems can be subject to significant uncertainties, which in turn can lead to a significant uncertainty in the predicted thermal-hydraulic performance of the plant under accident conditions. Because of these uncertainties, there is a probability that an accident sequence for which a best estimate thermal-hydraulic analysis predicts no core damage (success sequence) may actually lead to core damage. For brevity, this probability will be called thermal-hydraulic unreliability. The assessment of this unreliability for all the success sequences requires very expensive computations. Moreover, the computational cost increases drastically as the required thermal-hydraulic reliability increases. The required computational effort can be greatly reduced if a bounding approach can be used that either eliminates the need to compute thermal-hydraulic unreliabilities, or it leads to the analysis of a few bounding sequences for which the required thermal-hydraulic reliability is relatively small. The objective of this paper is to present such an approach and determine the order of magnitude of the thermal-hydraulic unreliabilities that may have to be computed

  19. Analysis of Implementation The Policy on Malaria Elimination in Indonesia

    Directory of Open Access Journals (Sweden)

    Betty Roosihermiatie

    2016-01-01

    Full Text Available Background: As a tropic country Indonesia still faces malaria problems. In Asean, indonesia is one of three countries with the highest malaria morbidity. In 2007, 396 (80% of 495 districts/municipalities in indonesia are malaria. In 2009 the government issued a decree of the minister of health No 293 on malaria elimination. The study aimed to analyze the implementation decree of Ministry of Health No. 293/2009 on malaria elimination. Methods: It was a descriptive study. The study was conducted in 4 provinces, and 4 districts based on malaria elimination stages as in Bali province and Karangasem district, Riau islands province and Bintan district, West Nusa Tenggara province and west Lombok district, and Maluku province and South Halmahera district. The stakeholders were Heads and malaria programmers at province/district Health Offices and the related programs. Data were collected by focus group discussion and secondary data were taken. Data were collected by focus group discussion and secondary data. Analysis for Ministry of Health decree No.293 year 2009 on 1 Comphrehend, 2 Implementation, and, 3 Comittment, 4 Innovation intervension to support malaria elimination, 5 Sustainability of activity community empowerment, 6 Proportion of budget. Results: showed there was district that had not issued local policy on malaria elimination, the implementation with comittment especially that health centers in areas under study corfi rm diagnose by laboratory examination and malaria treatment by Artemisin Combined Therapy (ACT, although there were still treatment to clinical malaria, innovation activities were of bersifat local spesifi c, and reward for Juru Malaria Desa or malaria cadre to increase malaria suspect case detection, and with district budget for malaria program ranged 0,95-5,6% of the total budget. Recomendations: It suggested to advocate all malaria endemic areas to issue local policy on malaria elimination, decide intervension of the

  20. Modification of Gaussian Elimination to the Complex Seismic Data

    International Nuclear Information System (INIS)

    Smaglichenko, Tatyana A.

    2011-01-01

    A method for solution of large and sparse systems with complex seismic observations has been developed by revising of the classical Gaussian elimination. The observation matrix is divided into a set of smaller cells that can be determined based on clusters of a seismic activity. Reliable inversion solutions with minimum error rating are selected within each cell, then solutions that are non-stable with respect to the same unknown are rejected After the final sifting the found unknowns are eliminated from the initial system with subsequent decreasing of its size. A numerical example is provided to demonstrate how the method can be applied to a real data set (a case study of the Nagano fault area, Central Japan). Results of processing of a huge volume of data and their importance for the Earthquake Early Warning (EEW) system are briefly discussed.

  1. Measles Elimination Efforts and 2008–2011 Outbreak, France

    Science.gov (United States)

    Lévy-Bruhl, Daniel; Baudon, Claire; Freymuth, François; Lamy, Mathieu; Maine, Catherine; Floret, Daniel; Parent du Chatelet, Isabelle

    2013-01-01

    Although few measles cases were reported in France during 2006 and 2007, suggesting the country might have been close to eliminating the disease, a dramatic outbreak of >20,000 cases occurred during 2008–2011. Adolescents and young adults accounted for more than half of cases; median patient age increased from 12 to 16 years during the outbreak. The highest incidence rate was observed in children <1 year of age, reaching 135 cases/100,000 infants during the last epidemic wave. Almost 5,000 patients were hospitalized, including 1,023 for severe pneumonia and 27 for encephalitis/myelitis; 10 patients died. More than 80% of the cases during this period occurred in unvaccinated persons, reflecting heterogeneous vaccination coverage, where pockets of susceptible persons still remain. Although vaccine coverage among children improved, convincing susceptible young adults to get vaccinated remains a critical issue if the target to eliminate the disease by 2015 is to be met. PMID:23618523

  2. Bacteriophage-Derived Peptidase CHAPK Eliminates and Prevents Staphylococcal Biofilms

    Directory of Open Access Journals (Sweden)

    Mark Fenton

    2013-01-01

    Full Text Available New antibacterial agents are urgently needed for the elimination of biofilm-forming bacteria that are highly resistant to traditional antimicrobial agents. Proliferation of such bacteria can lead to significant economic losses in the agri-food sector. This study demonstrates the potential of the bacteriophage-derived peptidase, CHAPK, as a biocidal agent for the rapid disruption of biofilm-forming staphylococci, commonly associated with bovine mastitis. Purified CHAPK applied to biofilms of Staphylococcus aureus DPC5246 completely eliminated the staphylococcal biofilms within 4 h. In addition, CHAPK was able to prevent biofilm formation by this strain. The CHAPK lysin also reduced S. aureus in a skin decolonization model. Our data demonstrates the potential of CHAPK as a biocidal agent for prevention and treatment of biofilm-associated staphylococcal infections or as a decontaminating agent in the food and healthcare sectors.

  3. Astrocytes mediate synapse elimination through MEGF10 and MERTK pathways

    Science.gov (United States)

    Chung, Won-Suk; Clarke, Laura E.; Wang, Gordon X.; Stafford, Benjamin K.; Sher, Alexander; Chakraborty, Chandrani; Joung, Julia; Foo, Lynette C.; Thompson, Andrew; Chen, Chinfei; Smith, Stephen J.; Barres, Ben A.

    2013-12-01

    To achieve its precise neural connectivity, the developing mammalian nervous system undergoes extensive activity-dependent synapse remodelling. Recently, microglial cells have been shown to be responsible for a portion of synaptic pruning, but the remaining mechanisms remain unknown. Here we report a new role for astrocytes in actively engulfing central nervous system synapses. This process helps to mediate synapse elimination, requires the MEGF10 and MERTK phagocytic pathways, and is strongly dependent on neuronal activity. Developing mice deficient in both astrocyte pathways fail to refine their retinogeniculate connections normally and retain excess functional synapses. Finally, we show that in the adult mouse brain, astrocytes continuously engulf both excitatory and inhibitory synapses. These studies reveal a novel role for astrocytes in mediating synapse elimination in the developing and adult brain, identify MEGF10 and MERTK as critical proteins in the synapse remodelling underlying neural circuit refinement, and have important implications for understanding learning and memory as well as neurological disease processes.

  4. Possibility evaluation of eliminating the saturated control fuel element from Tehran research reactor core

    International Nuclear Information System (INIS)

    Mirvakili, S.M.; Keyvani, M.; Arshi, S. Safaei; Khalafi, H.

    2012-01-01

    Highlights: ► We show safe operation of Tehran research reactor without one of its control rods. ► We propose an optimum new core configuration by fuel management calculations. ► We calculate neutronic and thermal hydraulic parameters of the new core. ► Parameters are consistent with the safety criteria. - Abstract: In this study the possibility of safe operation of Tehran research reactor (TRR) providing the elimination of one control rod is evaluated. One of the control fuel elements (CFEs) of TRR has been reached the maximum permissible burn-up and due to the impossibility of fresh fuel assembly provision under current situation, providing an optimum core configuration which satisfies safe operation conditions by applying fuel management calculations is essential. In order to ensure the safe and stable operation of recently proposed configuration for TRR core, neutronic and thermal hydraulic parameters of the new core are calculated and compared with the safety criteria. The results show good compatibility with reactor safety criteria, and provide desired shutdown margin and safety reactivity factor.

  5. Targeting Breast Cancer Micrometastases: To Eliminate the Seeds of Evil

    Science.gov (United States)

    2017-04-01

    understand how microscopic metastases in distant organs (e.g., bone), before becoming overt malignancies, survive and progress by interacting with...authenticity of these models in reflecting biological properties of micrometastases. We will also use them to identify therapies that may eliminate...to identify compounds that can be combined with current standard-of-care and eradicate bone micrometastases. The fulfillment of these goals will

  6. Elimination of corporal punishment of children's a human right

    Directory of Open Access Journals (Sweden)

    Stevanović Ivana

    2010-01-01

    Full Text Available The authors indicate the necessity of explicit legal prohibition of all corporal punishment of children that represent a violation of the right of the child to respect his/her physical integrity and human dignity. The paper emphasizes why all corporal punishment of children should be prohibited and points out the progress made at the legislative level to the elimination of all corporal punishment of children in some member states of the Council of Europe and the Republic of Serbia.

  7. PROCESS OF ELIMINATING HYDROGEN PEROXIDE IN SOLUTIONS CONTAINING PLUTONIUM VALUES

    Science.gov (United States)

    Barrick, J.G.; Fries, B.A.

    1960-09-27

    A procedure is given for peroxide precipitation processes for separating and recovering plutonium values contained in an aqueous solution. When plutonium peroxide is precipitated from an aqueous solution, the supernatant contains appreciable quantities of plutonium and peroxide. It is desirable to process this solution further to recover plutonium contained therein, but the presence of the peroxide introduces difficulties; residual hydrogen peroxide contained in the supernatant solution is eliminated by adding a nitrite or a sulfite to this solution.

  8. Elimination of 5. mu. particles from the human lung

    Energy Technology Data Exchange (ETDEWEB)

    Booker, D V; Chamberlain, A C; Rundo, J; Muir, D C.F.; Thomson, M L

    1967-01-01

    Counting inhaled 5-..mu..m polystyrene particles tagged with /sup 51/Cr showed the elimination divided into a moderately rapid phase (10 to 20 hr total) and a longer phase (150 to 300 day half-period). There was no very rapid phase as described by other authors. Alveolar deposition (> 50 days half-life) was 25 to 75%. This generally correlated with inhaled volume.

  9. Modern Approach to the Identification and Elimination of Periodontal Infection

    OpenAIRE

    Atanasovska-Stojanovska, Aneta

    2012-01-01

    In global terms, periodontitis is the leading cause of tooth loss, and causes serious aesthetic and functional problems. There are numerous scientific evidence that power periopathogenic microorganisms may have influence on some systemic conditions and diseases. If we add the fact that periimplantitis are caused by identical periopathogenes, management or effective identification and elimination of periodontal inflammation set as imperative in successful periodontal treatment and possible com...

  10. Methods for elimination of dampness in Building walls

    Science.gov (United States)

    Campian, Cristina; Pop, Maria

    2016-06-01

    Dampness elimination in building walls is a very sensitive problem, with high costs. Many methods are used, as: chemical method, electro osmotic method or physical method. The RECON method is a representative and a sustainable method in Romania. Italy has the most radical method from all methods. The technology consists in cutting the brick walls, insertion of a special plastic sheeting and injection of a pre-mixed anti-shrinking mortar.

  11. Three phase active power filter with selective harmonics elimination

    Directory of Open Access Journals (Sweden)

    Sozański Krzysztof

    2016-03-01

    Full Text Available This paper describes a three phase shunt active power filter with selective harmonics elimination. The control algorithm is based on a digital filter bank. The moving Discrete Fourier Transformation is used as an analysis filter bank. The correctness of the algorithm has been verified by simulation and experimental research. The paper includes exemplary results of current waveforms and their spectra from a three phase active power filter.

  12. Uncertainty evaluation of a modified elimination weighing for source preparation

    Energy Technology Data Exchange (ETDEWEB)

    Cacais, F.L.; Loayza, V.M., E-mail: facacais@gmail.com [Instituto Nacional de Metrologia, Qualidade e Tecnologia, (INMETRO), Rio de Janeiro, RJ (Brazil); Delgado, J.U. [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab. de Metrologia das Radiações Ionizantes

    2017-07-01

    Some modification in elimination weighing method for radioactive source allowed correcting weighing results without non-linearity problems assign a uncertainty contribution for the correction of the same order of the mass of drop uncertainty and check weighing variability in series source preparation. This analysis has focused in knowing the achievable weighing accuracy and the uncertainty estimated by Monte Carlo method for a mass of a 20 mg drop was at maximum of 0.06%. (author)

  13. Nuclear dismantling and asbestos elimination: the same challenge?

    International Nuclear Information System (INIS)

    Dadoumont, J.; Deboodt, P.

    1998-01-01

    The ALARA principle constitutes a powerful tool for workers dosimetry management in the nuclear field. A consequence of the application of this principle could be an accentuation of the nuclear risk face to the industrial risk. Using works of asbestos elimination in nuclear medium, the present article examines how a generalization of the utilization of the ALARA principle is conceivable and how the existing obstacles could be removed. (N.C.)

  14. Geographic analysis of thermal equilibria: A bioenergetic model for predicting thermal response of aquatic insect communities

    International Nuclear Information System (INIS)

    Sweeney, B.W.; Newbold, J.D.; Vannote, R.L.

    1991-12-01

    The thermal regime immediately downstream from bottom release reservoirs is often characterized by reduced diel and seasonal (winter warm/summer cool) conditions. These unusual thermal patterns have often been implicated as a primary factor underlying observed downstream changes in the species composition of aquatic macroinvertebrate communities. The potential mechanisms for selective elimination of benthic species by unusual thermal regimes has been reviewed. Although the effects of temperature on the rate and magnitude of larval growth and development has been included in the list of potential mechanisms, only recently have field studies below dams focused on this interrelationship. This study investigates the overall community structure as well as the seasonal pattern of larval growth and development for several univoltine species of insects in the Delaware River below or near the hypolimnetic discharge of the Cannonsville and Pepeacton dams. These dams, which are located on the West and East branches of the Delaware River, respectively, produce a thermal gradient extending about 70 km downstream

  15. Renal lactate elimination is maintained during moderate exercise in humans

    DEFF Research Database (Denmark)

    Volianitis, Stefanos; Dawson, Ellen A; Dalsgaard, Mads

    2012-01-01

    (2) (CaO(2)-CvO(2)) and lactate concentration differences were 0.8 ± 0.2 and 0.02 ± 0.02 mmol x L(-1), respectively. During exercise, arterial lactate and CaO(2)-CvO(2) increased to 7.1 ± 1.1 and 2.6 ± 0.8 mmol x L(-1), respectively (P renal blood flow...... with no significant change in the renal venous erythropoietin concentration (0.8 ± 1.4 U x L(-1)). The a-v lactate concentration difference increased to 0.5 ± 0.8 mmol x L(-1), indicating similar lactate elimination as at rest. In conclusion, a -70% reduction in renal blood flow does not provoke critical renal......Reduced hepatic lactate elimination initiates blood lactate accumulation during incremental exercise. In this study, we wished to determine whether renal lactate elimination contributes to the initiation of blood lactate accumulation. The renal arterial-to-venous (a-v) lactate difference...

  16. Review. Elimination of viruses in plants: twenty years of progress

    Directory of Open Access Journals (Sweden)

    A. Panattoni

    2013-02-01

    Full Text Available To shed light on trends about elimination of viruses from plants, a bibliographic research was conducted to identify thermotherapy, chemotherapy and tissue culture trials published from 1991 through 2010. Among woody plants, grapevine, apple and peach are the most frequent targets of sanitation protocols because their health status is strictly regulated. Even if thermotherapy represents the preferred method for the host, grapevine viruses can also be eliminated with chemotherapy and tissue culture; apple viruses respond to chemotherapy as well. Although a similar trend was reported among herbaceous plants, chemotherapy was the most frequently used technique in potato. With regard to virus, thermotherapy was successfully applied against viruses belonging to 13 families and an unassigned genus. Instead, chemotherapy and tissue culture techniques eradicated viruses belonging to fewer families (nine. An interpretation of thermotherapy effects considers the new metabolic “pathways” triggered by the natural antiviral response emitted by the infected plant, with particular reference to virus-induced gene silencing. With regard to chemotherapy, several groups of antiviral drugs belong to inosine monophosphate dehydrogenase inhibitors, S-adenosylhomocysteine hydrolase inhibitors, neuraminidase inhibitors. Tissue culture, usually adopted to regenerate plantlets in biotechnological breeding programs, represents the less used tool for eliminate viruses from plants.

  17. Challenges and needs for China to eliminate rabies.

    Science.gov (United States)

    Yin, Wenwu; Dong, Jie; Tu, Changchun; Edwards, John; Guo, Fusheng; Zhou, Hang; Yu, Hongjie; Vong, Sirenda

    2013-10-02

    In China, rabies is a significant public health concern where dogs remain the main reservoir of disease transmission to humans; rabies-related mortality ranks second in the world.We compiled all published articles and official documents on rabies in mainland China to examine challenges and needs to eliminate rabies in the country. The Chinese authorities have identified rabies as a priority, recognized rabies control in dogs as key to control rabies in humans and required intersectoral collaborations. Efforts have been made to respond effectively to the latest re-emergence of rabies, which peaked in 2007 with >3,300 cases. Despite these outcomes and the increasing volume of publications and regulations in the recent years, our review points to some major information gaps to improve rabies control activities and envisage elimination program. An emphasis on laboratory or pathogen-associated and basic epidemiology research in the literature has contrasted with the absence of information to monitor various systems in humans and animals (e.g. quality of surveillance, response and post-exposure prophylaxis). Information is also lacking to appropriately inform policymakers (e.g. economic disease burden, impact of policies) and assist program managers (e.g. comprehensive and strategic guidance for cost-effective prevention and control activities, public education and dog population management).In conclusion, strategic planning is needed to provide a sense of direction, demonstrate feasibility of elimination in China, and develop a research agenda, addressing country's operational needs and constraints. The planning should be a multisectoral effort.

  18. OZONE DEPLETING SUBSTANCES ELIMINATION MANAGEMENT: THE SUCCESS STORY OF MACEDONIA

    Directory of Open Access Journals (Sweden)

    Margarita Matlievska

    2013-04-01

    Full Text Available Man, with its activities, produces and uses substances that have negative impact on the environment and the human health, and can cause an economic damage. Consequently, they have a great impact on quality of life. Among the most harmful chemicals are Ozone Depleting Substances that are subject of regulation with international conventions. This Paper supports the fact that each country has to undertake national efforts for ozone depleting substances reduction and elimination. In that respect, the general objective of the Paper is to present the Macedonian unique experience regarding its efforts to reduce or eliminate these substances. The following two aspects were subject to the research: national legislation which regulates the Ozone Depleting Substances import and export as well as the implementation of the projects that resulted with the elimination of Ozone Depleting Substances quantities in the period 1995 – 2010. The research outcomes confirm the starting research hypothesis i.e. that with adequately created and implemented national action, the amount of Ozone Depleting Substances consumption can dramatically fall.

  19. Elimination diets in the management of eosinophilic esophagitis.

    Science.gov (United States)

    Wechsler, Joshua B; Schwartz, Sally; Amsden, Katie; Kagalwalla, Amir F

    2014-01-01

    Eosinophilic esophagitis, an increasingly recognized chronic inflammatory disorder isolated to the esophagus, is triggered by an abnormal allergic response to dietary antigens. Current treatment includes swallowed topical steroids and dietary modification, which aim to resolve symptoms and prevent long-term complications such as formation of strictures. The dietary approach has become more widely accepted because long-term steroid therapy is associated with potential risks. Dietary treatment includes elemental and elimination diets. An exclusive elemental diet, which requires replacement of all intact protein with amino acid-based formula, offers the best response of all available therapies, with remission in up to 96% of subjects proving it to be superior to all other available therapies including topical steroids. However, compliance with this approach is challenging because of poor taste and monotony. The high cost of formula and the associated psychosocial problems are additional drawbacks of this approach. Empiric and allergy test-directed elimination diets have gained popularity given that elimination of a limited number of foods is much easier and as such is more readily acceptable. There is a growing body of literature supporting this type of therapy in both children and adults. This paper reviews the evidence for all types of dietary therapy in eosinophilic esophagitis.

  20. Effects of perfluorochemical distribution and elimination dynamics on cardiopulmonary function.

    Science.gov (United States)

    Miller, T F; Milestone, B; Stern, R; Shaffer, T H; Wolfson, M R

    2001-03-01

    Based on a physicochemical property profile, we tested the hypothesis that different perfluorochemical (PFC) liquids may have distinct effects on intrapulmonary PFC distribution, lung function, and PFC elimination kinetics during partial liquid ventilation (PLV). Young rabbits were studied in five groups [healthy, PLV with perflubron (PFB) or with perfluorodecalin (DEC); saline lavage injury and conventional mechanical ventilation (CMV); saline lavage injury PLV with PFB or with DEC]. Arterial blood chemistry, respiratory compliance (Cr), quantitative computed tomography of PFC distribution, and PFC loss rate were assessed for 4 h. Initial distribution of PFB was more homogenous than that of DEC; over time, PFB redistributed to dependent regions whereas DEC distribution was relatively constant. PFC loss rate decreased over time in all groups, was higher with DEC than PFB, and was lower with injury. In healthy animals, arterial PO(2) (Pa(O(2))) and Cr decreased with either PFC; the decrease was greater and sustained with DEC. Lavaged animals treated with either PFC demonstrated increased Pa(O(2)), which was sustained with PFB but deteriorated with DEC. Lavaged animals treated with PFB demonstrated increased Cr, higher Pa(O(2)), and lower arterial PCO(2) than with CMV or PLV with DEC. The results indicate that 1) initial distribution and subsequent intrapulmonary redistribution of PFC are related to PFC properties; 2) PFC distribution influences PFC elimination, gas exchange, and Cr; and 3) PFC elimination, gas exchange, and Cr are influenced by PFC properties and lung condition.

  1. Transmission dynamics and prospects for the elimination of canine rabies.

    Directory of Open Access Journals (Sweden)

    Katie Hampson

    2009-03-01

    Full Text Available Rabies has been eliminated from domestic dog populations in Western Europe and North America, but continues to kill many thousands of people throughout Africa and Asia every year. A quantitative understanding of transmission dynamics in domestic dog populations provides critical information to assess whether global elimination of canine rabies is possible. We report extensive observations of individual rabid animals in Tanzania and generate a uniquely detailed analysis of transmission biology, which explains important epidemiological features, including the level of variation in epidemic trajectories. We found that the basic reproductive number for rabies, R0, is very low in our study area in rural Africa (approximately 1.2 and throughout its historic global range (<2. This finding provides strong support for the feasibility of controlling endemic canine rabies by vaccination, even near wildlife areas with large wild carnivore populations. However, we show that rapid turnover of domestic dog populations has been a major obstacle to successful control in developing countries, thus regular pulse vaccinations will be required to maintain population-level immunity between campaigns. Nonetheless our analyses suggest that with sustained, international commitment, global elimination of rabies from domestic dog populations, the most dangerous vector to humans, is a realistic goal.

  2. Evidence-Based Psychosocial Treatments for Pediatric Elimination Disorders.

    Science.gov (United States)

    Shepard, Jaclyn A; Poler, Joseph E; Grabman, Jesse H

    2017-01-01

    Pediatric elimination disorders are common in childhood, yet psychosocial correlates are generally unclear. Given the physiological concomitants of both enuresis and encopresis, and the fact that many children with elimination disorders are initially brought to their primary care physician for treatment, medical evaluation and management are crucial and may serve as the first-line treatment approach. Scientific investigation on psychological and behavioral interventions has progressed over the past couple of decades, resulting in the identification of effective treatments for enuresis and encopresis. However, the body of literature has inherent challenges, particularly given the multicomponent nature of many of the treatment packages. This review identified 25 intervention studies-18 for nocturnal enuresis and 7 for encopresis-over the past 15 years and classified them according to the guidelines set forth by the Task Force on the Promotion and Dissemination of Psychological Procedures. For nocturnal enuresis, the urine alarm and dry-bed training were identified as well-established treatments, Full Spectrum Home Therapy was probably efficacious, lifting was possibly efficacious, and hypnotherapy and retention control training were classified as treatments of questionable efficacy. For encopresis, only two probably efficacious treatments were identified: biofeedback and enhanced toilet training (ETT). Best practice recommendations and suggestions for future research are provided to address existing limitations, including heterogeneity and the multicomponent nature of many of the interventions for pediatric elimination disorders.

  3. Uptake and elimination of radiotungsten in black bullheads

    International Nuclear Information System (INIS)

    Reed, J.R.

    1975-01-01

    Black bullheads, Ictalurus melas (Rafinesque), accumulated radiotungsten from food and water. Whole-body activity reached a plateau after the fish had been in tagged water 4 days (mean temperature 154 0 C). Whole-body elimination of radiotungsten varied with the method of uptake. Fish that had accumulated radiotungsten from water had a single exponential component of elimination with a biological half-life of 2.75 days. Fish that had received radioisotope in a single feeding lost activity at two rates; one component had a biological half-life of 14 hr and the second 6 days. The bone, skin, flesh, blood, and gills contained the greatest percentages of whole-body activity after 1 day of uptake from tagged water; after 8 days, the flesh, gills, bone, and gut together contained 78.6 percent of the total activity. The bone had the longest biological half-life (8.0 days) of the tissues examined and contained 69.8 percent of the whole-body acitivty after 16 days of elimination

  4. Mercury bioaccumulation and elimination by Xenomelanires brasiliensis - radioactive tracers technique

    International Nuclear Information System (INIS)

    Malagrino, Waldir; Mesquita, Carlos Henrique de; Sousa, Eduinetty Ceci P.M. de

    2002-01-01

    The present work has as main objective to emphasized the importance of using radioactive tracers as well as to establish a methodology for the utilization of 203 Hg in the bioaccumulation study of mercury by X enomelanires brasiliensis. The exposure time was 168 hours. The bioaccumulation of mercury from the water as well as the elimination of the metal previously absorbed were determined by measuring the activity of 203 Hg, which was added to the water in the beginning of the experiments. The technique chosen is suitable to study the behavior of the stable mercury since the radioisotope used is an isotope of the same element and therefore presents the same chemical properties. The results obtained show that the absorption and elimination of mercury by Xenomelanires brasiliensis is slow, 168 hours being necessary for the elimination of 38 % of the previously absorbed mercury. The results are of main concern if it is considered that the literature about bioaccumulation of mercury by the Brazilian ichthyofauna is scarce. Furthermore the species Xenomelanires brasiliensis is part of the food chain and the results can be used in the evaluation of the potential risk of the mercury bioaccumulation by fishes of higher trophic levels and by men who are the final link of the food chain. (author)

  5. Gazi Üniversitesi Gazi Eğitim Fakültesi Güzel Sanatlar Eğitimi Bölümü Müzik Eğitimi Anabilim Dalı Keman Öğrencilerinin Aldıkları Keman Eğitiminde Karşılaştıkları Sorunlar ve Sorunları Çözmede İzledikleri Yollar Problems Encountered by Violin Students From Gazi University Faculty of Education Department of Education of Fine Arts Department of Music Education During Violin Education and Methods to be Followed to Solve These Problems

    Directory of Open Access Journals (Sweden)

    Gamze Elif TANINMIŞ

    2013-07-01

    Full Text Available This research, aims to determine problems encountered by violinstudents from Gazi University Faculty of Education Department ofEducation of Fine Arts Department of Music Education in the course ofviolin education and methods to be followed to solve these problems.This research is a descriptive work in terms of its aim and quality of thedata collected in accordance with this aim. Resources that are relevantto this topic have been reviewed and 87 undergraduate violin studentspursuing their education in Gazi University Faculty of EducationDepartment of Fine Arts Department of Music Education in academicyear 2011-12 have been surveyed in an effort to designate what kind ofproblems they encounter during their violin education and methodsthey follow to cope with them. The data acquired as results of thesurvey are presented and contrued in the form of charts. Inconsideration of the data, not to begin to start playing violin in an earlyage, not to allocate enough time for daily individual violin practice andinadequacy of course hours are seen as three most important problems.Three most important problems they experience while learning teachingmethods such as practices, etudes, works of art, etc. are the onesassociated with the use of bow, bowing techniques and double stop. It ispointed out that a clear majority of students play the musical pieces inparts, not throughly and receive help from their instructors in order tosolve the problems they encounter when they study teaching methodssuch as practices, etudes, works of art, etc. and instructor/s theyreceive help from find/s solution to their problems at the rate of 68.96. Bu araştırma, Gazi Üniversitesi Gazi Eğitim Fakültesi Güzel Sanatlar Eğitimi Bölümü Müzik Eğitimi Anabilim Dalı keman öğrencilerinin aldıkları keman eğitiminde karşılaştıkları sorunları ve sorunları çözmede izledikleri yolları tespit etmeyi amaçlamaktadır. Araştırma, taşıdığı amaç ve bu amaca uygun

  6. Electron-impact and pyrolytic eliminations from 4-tert-butylcyclohexyl xanthates

    International Nuclear Information System (INIS)

    Eadon, G.; Jefson, M.

    1976-01-01

    The stereochemistry of electron--impact induced xanthic acid elimination reactions was assessed by mass spectrographic studies of cis and trans deuterated 4-tert-butylcyclohexyl xanthates and their derivatives. Cis elimination was observed to be about 30 times as facile as trans elimination in the axial xanthate reaction. In the equatorial ester derivative reactions, the cis elimination was found to be slightly preferred. The electron-impact induced elimination results were compared with pyrolytic elimination results for the xanthates; and similar stereochemistry was observed for each type of elimination

  7. Method of thermally processing superplastically formed aluminum-lithium alloys to obtain optimum strengthening

    Science.gov (United States)

    Anton, Claire E. (Inventor)

    1993-01-01

    Optimum strengthening of a superplastically formed aluminum-lithium alloy structure is achieved via a thermal processing technique which eliminates the conventional step of solution heat-treating immediately following the step of superplastic forming of the structure. The thermal processing technique involves quenching of the superplastically formed structure using static air, forced air or water quenching.

  8. Teleportation of an Arbitrary Two-Atom Entangled State via Thermal Cavity

    Institute of Scientific and Technical Information of China (English)

    WANG Dong; LIU Yi-Min; GAO Gan; SHI Shou-Hua; ZHANG Zhan-Jun

    2007-01-01

    We present an experimentally feasible scheme for teleportation of an arbitrary unknown two-atom entangled state by using two-atom Bell states in driven thermal cavities.In this scheme,the effects of thermal field and cavity decay can be all eliminated.Moreover,the present scheme is feasible according to current technologies.

  9. Global elimination of leprosy by 2020: are we on track?

    Science.gov (United States)

    Blok, David J; De Vlas, Sake J; Richardus, Jan Hendrik

    2015-10-22

    Every year more than 200,000 new leprosy cases are registered globally. This number has been fairly stable over the past 8 years. WHO has set a target to interrupt the transmission of leprosy globally by 2020. The aim of this study is to investigate whether this target, interpreted as global elimination, is feasible given the current control strategy. We focus on the three most important endemic countries, India, Brazil and Indonesia, which together account for more than 80 % of all newly registered leprosy cases. We used the existing individual-based model SIMCOLEP to predict future trends of leprosy incidence given the current control strategy in each country. SIMCOLEP simulates the spread of M. leprae in a population that is structured in households. Current control consists of passive and active case detection, and multidrug therapy (MDT). Predictions of leprosy incidence were made for each country as well as for one high-endemic region within each country: Chhattisgarh (India), Pará State (Brazil) and Madura (Indonesia). Data for model quantification came from: National Leprosy Elimination Program (India), SINAN database (Brazil), and Netherlands Leprosy Relief (Indonesia). Our projections of future leprosy incidence all show a downward trend. In 2020, the country-level leprosy incidence has decreased to 6.2, 6.1 and 3.3 per 100,000 in India, Brazil and Indonesia, respectively, meeting the elimination target of less than 10 per 100,000. However, elimination may not be achieved in time for the high-endemic regions. The leprosy incidence in 2020 is predicted to be 16.2, 21.1 and 19.3 per 100,000 in Chhattisgarh, Pará and Madura, respectively, and the target may only be achieved in another 5 to 10 years. Our predictions show that although country-level elimination is reached by 2020, leprosy is likely to remain a problem in the high-endemic regions (i.e. states, districts and provinces with multimillion populations), which account for most of the cases in a

  10. Liposomal clodronate selectively eliminates microglia from primary astrocyte cultures

    Directory of Open Access Journals (Sweden)

    Kumamaru Hiromi

    2012-05-01

    Full Text Available Abstract Background There is increasing interest in astrocyte biology because astrocytes have been demonstrated to play prominent roles in physiological and pathological conditions of the central nervous system, including neuroinflammation. To understand astrocyte biology, primary astrocyte cultures are most commonly used because of the direct accessibility of astrocytes in this system. However, this advantage can be hindered by microglial contamination. Although several authors have warned regarding microglial contamination in this system, complete microglial elimination has never been achieved. Methods The number and proliferative potential of contaminating microglia in primary astrocyte cultures were quantitatively assessed by immunocytologic and flow cytometric analyses. To examine the utility of clodronate for microglial elimination, primary astrocyte cultures or MG-5 cells were exposed to liposomal or free clodronate, and then immunocytologic, flow cytometric, and gene expression analyses were performed. The gene expression profiles of microglia-eliminated and microglia-contaminated cultures were compared after interleukin-6 (IL-6 stimulation. Results The percentage of contaminating microglia exceeded 15% and continued to increase because of their high proliferative activity in conventional primary astrocyte cultures. These contaminating microglia were selectively eliminated low concentration of liposomal clodronate. Although primary microglia and MG-5 cells were killed by both liposomal and free clodronate, free clodronate significantly affected the viability of astrocytes. In contrast, liposomal clodronate selectively eliminated microglia without affecting the viability, proliferation or activation of astrocytes. The efficacy of liposomal clodronate was much higher than that of previously reported methods used for decreasing microglial contamination. Furthermore, we observed rapid tumor necrosis factor-α and IL-1b gene induction in

  11. Thermal stress mitigation by Active Thermal Control

    DEFF Research Database (Denmark)

    Soldati, Alessandro; Dossena, Fabrizio; Pietrini, Giorgio

    2017-01-01

    This work proposes an Active Thermal Control (ATC) of power switches. Leveraging on the fact that thermal stress has wide impact on the system reliability, controlling thermal transients is supposed to lengthen the lifetime of electronic conversion systems. Indeed in some environments...... results of control schemes are presented, together with evaluation of the proposed loss models. Experimental proof of the ability of the proposed control to reduce thermal swing and related stress on the device is presented, too....

  12. Unique nuclear thermal rocket engine

    International Nuclear Information System (INIS)

    Culver, D.W.; Rochow, R.

    1993-06-01

    In January, 1992, a new, advanced nuclear thermal rocket engine (NTRE) concept intended for manned missions to the moon and to Mars was introduced (Culver, 1992). This NTRE promises to be both shorter and lighter in weight than conventionally designed engines, because its forward flowing reactor is located within an expansion-deflection rocket nozzle. The concept has matured during the year, and this paper discusses a nearer term version that resolves four open issues identified in the initial concept: (1) the reactor design and cooling scheme simplification while retaining a high pressure power balance option; (2) elimination need for a new, uncooled nozzle throat material suitable for long life application; (3) a practical provision for reactor power control; and (4) use of near-term, long-life turbopumps

  13. Philosophy for nuclear thermal propulsion

    International Nuclear Information System (INIS)

    Buden, D.; Madsen, W.; Redd, L.

    1993-01-01

    The philosophy used for development of nuclear thermal propulsion will determine the cost, schedule and risk associated with the activities. As important is the impression of the decision makers. If the development cost is higher than the product value, it is doubtful that funding will ever be available. On the other hand, if the development supports the economic welfare of the country with a high rate of return, the probability of funding greatly increases. The philosophy is divided into: realism, design, operations and qualification. ''Realism'' addresses such items as political acceptability, potential customers, robustness-flexibility, public acceptance, decisions as needed, concurrent engineering, and the possible role of the CIS. ''Design'' addresses ''minimum requirement,'' built in safety and reliability redundancy, emphasize on eliminating risk at lowest levels, and the possible inclusion of electric generation. ''Operations'' addresses sately, environment, operations, design margins and degradation modes. ''Qualification'' addresses testing needs and test facilities

  14. W-320 Project thermal modeling

    Energy Technology Data Exchange (ETDEWEB)

    Sathyanarayana, K., Fluor Daniel Hanford

    1997-03-18

    This report summarizes the results of thermal analysis performed to provide a technical basis in support of Project W-320 to retrieve by sluicing the sludge in Tank 241-C-106 and to transfer into Tank 241-AY-102. Prior theraml evaluations in support of Project W-320 safety analysis assumed the availability of 2000 to 3000 CFM, as provided by Tank Farm Operations, for tank floor cooling channels from the secondary ventilation system. As this flow availability has no technical basis, a detailed Tank 241-AY-102 secondary ventilation and floor coating channel flow model was developed and analysis was performed. The results of the analysis show that only about 150 cfm flow is in floor cooLing channels. Tank 241-AY-102 thermal evaluation was performed to determine the necessary cooling flow for floor cooling channels using W-030 primary ventilation system for different quantities of Tank 241-C-106 sludge transfer into Tank 241-AY-102. These sludge transfers meet different options for the project along with minimum required modification of the ventilation system. Also the results of analysis for the amount of sludge transfer using the current system is presented. The effect of sludge fluffing factor, heat generation rate and its distribution between supernatant and sludge in Tank 241-AY-102 on the amount of sludge transfer from Tank 241-C-106 were evaluated and the results are discussed. Also transient thermal analysis was performed to estimate the time to reach the steady state. For a 2 feet sludge transfer, about 3 months time will be requirad to reach steady state. Therefore, for the purpose of process control, a detailed transient thermal analysis using GOTH Computer Code will be required to determine transient response of the sludge in Tank 241-AY-102. Process control considerations are also discussed to eliminate the potential for a steam bump during retrieval and storage in Tanks 241-C-106 and 241-AY-102 respectively.

  15. Dose-dependent elimination of 8-methoxypsoralen in the mouse

    International Nuclear Information System (INIS)

    Cheney, P.; Pacula, C.M.; Gerber, N.; Mays, D.C.

    1986-01-01

    8-Methoxypsoralen (8-MOP), a photoactive linear furocoumarin, is effective in the treatment of several diseases, including psoriasis, mycosis fungoides and T-cell leukemia. Recently, a specific extraction procedure for 14 C-8-MOP showed that the elimination of 8-MOP in the rat was dose-dependent. Similar pharmacokinetic studies were undertaken in mice. Purity of 14 C-8-MOP, verified by a four-tube countercurrent distribution using hexane (8 ml) and pH 7.4 phosphate buffer (0.1 M 15 ml) as described by Bush, was >98% and distributed with a partition coefficient of 3.86. Male CD-1 mice were each given an i.p. dose of 10 or 50 mg/kg of 14 C-8-MOP (3.4 μCi/mg) sacrificed at timed intervals, homogenized in 150 ml of 0.1 M phosphate buffer (pH 7.4) and a portion (0.8 ml) of the homogenate used to quantify 8-MOP as described above. The elimination half-life measured in the first 45 min was 7.4 min at 10 mg/kg and 95 min at 50 mg/kg. A similar half-life of 9.2 min was measured in mice given an i.v. dose 10 mg/kg of 8-MOP. Explanations of dose-dependent elimination include enzyme saturation, product inhibition or both. Between 58-80% of the administered radioactivity was recovered in the urine within 24 hr. Nine peaks of radioactivity were observed in the urine by HPLC, two of which coeluted with 5,8-dihydroxypsoralen and 6-(7-hydroxy-8-methoxycoumaryl)-acetic acid

  16. Effectiveness of radiation processing in elimination of Aeromonas from food

    International Nuclear Information System (INIS)

    Nagar, Vandan; Bandekar, Jayant R.

    2011-01-01

    Genus Aeromonas has emerged as an important human pathogen because it causes a variety of diseases including gastroenteritis and extra-intestinal infections. Contaminated water, sprouts, vegetables, seafood and food of animal origin have been considered to be the important sources of Aeromonas infection. In the present study, radiation sensitivity of indigenous strains of Aeromonas spp. from different food samples was evaluated. The decimal reduction dose (D 10 ) values of different Aeromonas isolates in saline at 0-4 o C were in the range of 0.031-0.046 kGy. The mixed sprouts, chicken and fish samples were inoculated with a cocktail of five most resistant isolates (A. salmonicida Y567, A. caviae A85, A. jandaei A514A, A. hydrophila CECT 839 T and A. veronii Y47) and exposed to γ radiation to study the effectiveness of radiation treatment in elimination of Aeromonas. D 10 values of Aeromonas cocktail in mixed sprouts, chicken and fish samples were found to be 0.081±0.001, 0.089±0.003 and 0.091±0.003 kGy, respectively. Radiation treatment with a 1.5 kGy dose resulted in complete elimination of 10 5 CFU/g of Aeromonas spp. from mixed sprouts, chicken and fish samples. No recovery of Aeromonas was observed in the 1.5 kGy treated samples stored at 4 o C up to 12 (mixed sprouts) and 7 days (chicken and fish samples), even after enrichment and selective plating. This study demonstrates that a 1.5 kGy dose of irradiation treatment could result in complete elimination of 10 5 CFU/g of Aeromonas spp. from mixed sprouts, chicken and fish samples.

  17. Effectiveness of radiation processing in elimination of Aeromonas from food

    Science.gov (United States)

    Nagar, Vandan; Bandekar, Jayant R.

    2011-08-01

    Genus Aeromonas has emerged as an important human pathogen because it causes a variety of diseases including gastroenteritis and extra-intestinal infections. Contaminated water, sprouts, vegetables, seafood and food of animal origin have been considered to be the important sources of Aeromonas infection. In the present study, radiation sensitivity of indigenous strains of Aeromonas spp. from different food samples was evaluated. The decimal reduction dose (D10) values of different Aeromonas isolates in saline at 0-4 °C were in the range of 0.031-0.046 kGy. The mixed sprouts, chicken and fish samples were inoculated with a cocktail of five most resistant isolates (A. salmonicida Y567, A. caviae A85, A. jandaei A514A, A. hydrophila CECT 839T and A. veronii Y47) and exposed to γ radiation to study the effectiveness of radiation treatment in elimination of Aeromonas. D10 values of Aeromonas cocktail in mixed sprouts, chicken and fish samples were found to be 0.081±0.001, 0.089±0.003 and 0.091±0.003 kGy, respectively. Radiation treatment with a 1.5 kGy dose resulted in complete elimination of 105 CFU/g of Aeromonas spp. from mixed sprouts, chicken and fish samples. No recovery of Aeromonas was observed in the 1.5 kGy treated samples stored at 4 °C up to 12 (mixed sprouts) and 7 days (chicken and fish samples), even after enrichment and selective plating. This study demonstrates that a 1.5 kGy dose of irradiation treatment could result in complete elimination of 105 CFU/g of Aeromonas spp. from mixed sprouts, chicken and fish samples.

  18. In vivo thermoterapy: attempt to eliminate virus in potato tuber

    Science.gov (United States)

    Ayu Astarini, Ida; Margareth, Deborah; Temaja, I. Gede Rai Maya

    2018-03-01

    Potato is one of an important vegetable crop in Indonesia, including Bali. Main potato production areas in Bali are at Bedugul region, 1.200 m above sea level. Potato production in Bali continued to decrease due to diseases infection, such as early blight, late blight, black leg and virus diseases. Potato farmers in Bali usually set aside their harvest as seed potatoes, resulting in virus diseases being carried out on the next planting seasons and eventually would decrease potato production both in quantity and quality. Four types of virus were confirmed: PVY, PVX, PVS and PRLV. A number of studies have reported thermotherapy technique has been employed to eliminate potato virus in vitro. However, this technique is not readily available for farmers, since there is no established tissue culture laboratory to support. Therefore, there is an urgent need to develop a more practical method. The objective of this study was to eliminate virus on seed potatoes using thermotherapy on tuber. Seed potatoes with 1 cm sprout which were virus positive were placed on sterile charred rice paddy husk, and then put into a humidified incubator. Tubers were exposed to 37°C for four days followed by 34°C for three days alternately for two weeks and three weeks duration. Four tubers received heat exposure regime for each virus type. After thermotherapy, potato tubers were transferred to pots containing charred rice paddy husk and maintain for three weeks until new leaves emerge for virus analyses. Results show that seed tubers experienced delayed growth after thermotherapy. Control plants sprout one week after thermotherapy, while treated plants were not yet sprouting. Experiment is currently underway. It is expected that heat treatment on tuber will give a practical method for farmers to eliminate virus of seed potatoes.

  19. Distribution and elimination of Norfloxacin in Fenneropenaeus chinensis larvae

    Science.gov (United States)

    Sun, Ming; Li, Jian; Zhao, Fazhen; Li, Jitao; Chang, Zhiqiang

    2013-09-01

    This study examined the distribution and elimination of Norfloxacin (NFLX) in Fenneropenaeus chinensis ovary and egg and newly hatched larvae. Mature parental shrimp were exposed to 4 or 10 mg L-1 NFLX for 2 or 5 d. Ovary and eggs of the shrimp were sampled after spawning in order to detect NFLX residue using high-performance liquid chromatography (HPLC). Results showed that NFLX residue accumulated in F. chinensis eggs after the parental exposure, with the highest residue detected in ovary. To examine the fate of NFLX residue in larvae, we further determined the concentration of NFLX residue in F. chinensis eggs and larvae at 4 different developmental stages after 24-h exposure. From the newly metamorphosed larvae (0 h post-metamorphosis, h.p.m), samples were taken at different time intervals to 72 h.p.m. HPLC assay showed that the concentrations of NFLX residue in zoea exposed to 4 and 10 mg L-1 NFLX were the highest at 1.5 h, i.e., 0.332 and 0.454 μg g-1, respectively. At the two NFLX exposure levels, the elimination time of half NFLX (half life) in nauplius was 45.36 and 49.85 h, respectively, followed by that in zoea (31.68 and 33.13 h), mysis larvae (42.24 and 47.28 h) and postlarvae (24.48 and 30.96 h). Both NFLX exposure levels had a germicidal effect. The distribution and elimination of NFLX residue in F. chinensis tissue, eggs and larvae correlated well with the drug exposure level. The disappearance of NFLX residue coincided with the larval growth, and the half-life of NFLX decreased with the larval development.

  20. Deviance and resistance: Malaria elimination in the greater Mekong subregion.

    Science.gov (United States)

    Lyttleton, Chris

    2016-02-01

    Malaria elimination rather than control is increasingly globally endorsed, requiring new approaches wherein success is not measured by timely treatment of presenting cases but eradicating all presence of infection. This shift has gained urgency as resistance to artemisinin-combination therapies spreads in the Greater Mekong Sub-region (GMS) posing a threat to global health security. In the GMS, endemic malaria persists in forested border areas and elimination will require calibrated approaches to remove remaining pockets of residual infection. A new public health strategy called 'positive deviance' is being used to improve health promotion and community outreach in some of these zones. However, outbreaks sparked by alternative understandings of appropriate behaviour expose the unpredictable nature of 'border malaria' and difficulties eradication faces. Using a recent spike in infections allegedly linked to luxury timber trade in Thai borderlands, this article suggests that opportunities for market engagement can cause people to see 'deviance' as a means to material advancement in ways that increase disease vulnerability. A malaria outbreak in Ubon Ratchathani was investigated during two-week field-visit in November 2014 as part of longer project researching border malaria in Thai provinces. Qualitative data were collected in four villages in Ubon's three most-affected districts. Discussions with villagers focused primarily on changing livelihoods, experience with malaria, and rosewood cutting. Informants included ten men and two women who had recently overnighted in the nearby forest. Data from health officials and villagers are used to frame Ubon's rise in malaria transmission within moral and behavioural responses to expanding commodity supply-chains. The article argues that elimination strategies in the GMS must contend with volatile outbreaks among border populations wherein 'infectiousness' and 'resistance' are not simply pathogen characteristics but also

  1. Last-position elimination-based learning automata.

    Science.gov (United States)

    Zhang, Junqi; Wang, Cheng; Zhou, MengChu

    2014-12-01

    An update scheme of the state probability vector of actions is critical for learning automata (LA). The most popular is the pursuit scheme that pursues the estimated optimal action and penalizes others. This paper proposes a reverse philosophy that leads to last-position elimination-based learning automata (LELA). The action graded last in terms of the estimated performance is penalized by decreasing its state probability and is eliminated when its state probability becomes zero. All active actions, that is, actions with nonzero state probability, equally share the penalized state probability from the last-position action at each iteration. The proposed LELA is characterized by the relaxed convergence condition for the optimal action, the accelerated step size of the state probability update scheme for the estimated optimal action, and the enriched sampling for the estimated nonoptimal actions. The proof of the ϵ-optimal property for the proposed algorithm is presented. Last-position elimination is a widespread philosophy in the real world and has proved to be also helpful for the update scheme of the learning automaton via the simulations of well-known benchmark environments. In the simulations, two versions of the LELA, using different selection strategies of the last action, are compared with the classical pursuit algorithms Discretized Pursuit Reward-Inaction (DP(RI)) and Discretized Generalized Pursuit Algorithm (DGPA). Simulation results show that the proposed schemes achieve significantly faster convergence and higher accuracy than the classical ones. Specifically, the proposed schemes reduce the interval to find the best parameter for a specific environment in the classical pursuit algorithms. Thus, they can have their parameter tuning easier to perform and can save much more time when applied to a practical case. Furthermore, the convergence curves and the corresponding variance coefficient curves of the contenders are illustrated to characterize their

  2. Effectiveness of radiation processing in elimination of Aeromonas from food

    Energy Technology Data Exchange (ETDEWEB)

    Nagar, Vandan [Food Technology Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Bandekar, Jayant R., E-mail: jrb@barc.gov.i [Food Technology Division, Bhabha Atomic Research Centre, Mumbai 400085 (India)

    2011-08-15

    Genus Aeromonas has emerged as an important human pathogen because it causes a variety of diseases including gastroenteritis and extra-intestinal infections. Contaminated water, sprouts, vegetables, seafood and food of animal origin have been considered to be the important sources of Aeromonas infection. In the present study, radiation sensitivity of indigenous strains of Aeromonas spp. from different food samples was evaluated. The decimal reduction dose (D{sub 10}) values of different Aeromonas isolates in saline at 0-4 {sup o}C were in the range of 0.031-0.046 kGy. The mixed sprouts, chicken and fish samples were inoculated with a cocktail of five most resistant isolates (A. salmonicida Y567, A. caviae A85, A. jandaei A514A, A. hydrophila CECT 839{sup T} and A. veronii Y47) and exposed to {gamma} radiation to study the effectiveness of radiation treatment in elimination of Aeromonas. D{sub 10} values of Aeromonas cocktail in mixed sprouts, chicken and fish samples were found to be 0.081{+-}0.001, 0.089{+-}0.003 and 0.091{+-}0.003 kGy, respectively. Radiation treatment with a 1.5 kGy dose resulted in complete elimination of 10{sup 5} CFU/g of Aeromonas spp. from mixed sprouts, chicken and fish samples. No recovery of Aeromonas was observed in the 1.5 kGy treated samples stored at 4 {sup o}C up to 12 (mixed sprouts) and 7 days (chicken and fish samples), even after enrichment and selective plating. This study demonstrates that a 1.5 kGy dose of irradiation treatment could result in complete elimination of 10{sup 5} CFU/g of Aeromonas spp. from mixed sprouts, chicken and fish samples.

  3. The infinite limit as an eliminable approximation for phase transitions

    Science.gov (United States)

    Ardourel, Vincent

    2018-05-01

    It is generally claimed that infinite idealizations are required for explaining phase transitions within statistical mechanics (e.g. Batterman 2011). Nevertheless, Menon and Callender (2013) have outlined theoretical approaches that describe phase transitions without using the infinite limit. This paper closely investigates one of these approaches, which consists of studying the complex zeros of the partition function (Borrmann et al., 2000). Based on this theory, I argue for the plausibility for eliminating the infinite limit for studying phase transitions. I offer a new account for phase transitions in finite systems, and I argue for the use of the infinite limit as an approximation for studying phase transitions in large systems.

  4. Accumulation, elimination and retention of 99Tc by duckweed

    International Nuclear Information System (INIS)

    Hattink, J.; Weltje, L.; Wolterbeek, H.Th.; Goeij, J.J.M. de

    2004-01-01

    Accumulation dynamics of the long-lived fission product technetium ( 99 Tc) in duckweed is studied. Duckweed serves as model for aquatic plants, because of its representative foliar uptake for 99 Tc. 99 Tc is irreversibly accumulated and distributed over cytoplasm, chloroplasts and mitochondria. Autoradiography showed that 99 Tc was not transported to new biomass. Irreversible storage of 99 Tc in plant biomass means that steady-state situations cannot be interpreted as a balance between uptake and elimination of 99 Tc, but that 99 Tc continuously builds up in each single duckweed plant and overall Tc concentrations are averaged over new biomass. (author)

  5. The determination of antipyrine elimination in saliva by liquid chromatography.

    Science.gov (United States)

    Gartzke, J; Jäger, H

    1991-01-01

    A simple, fast and reliable liquid chromatographic method for the determination of antipyrine in saliva is described. The elimination of antipyrine is a good indicator for general evaluation of the liver function for dispositional purposes for example in occupational and environmental medicine. The described LC method was compared with a more extensive photometric procedure. The results obtained from both methods show very good correlation. Only one measurement is necessary to determine the antipyrine clearance. Furthermore the antipyrine dosage can be minimized, because of the sensitivity of the HPLC-method.

  6. Information filtering based on corrected redundancy-eliminating mass diffusion.

    Science.gov (United States)

    Zhu, Xuzhen; Yang, Yujie; Chen, Guilin; Medo, Matus; Tian, Hui; Cai, Shi-Min

    2017-01-01

    Methods used in information filtering and recommendation often rely on quantifying the similarity between objects or users. The used similarity metrics often suffer from similarity redundancies arising from correlations between objects' attributes. Based on an unweighted undirected object-user bipartite network, we propose a Corrected Redundancy-Eliminating similarity index (CRE) which is based on a spreading process on the network. Extensive experiments on three benchmark data sets-Movilens, Netflix and Amazon-show that when used in recommendation, the CRE yields significant improvements in terms of recommendation accuracy and diversity. A detailed analysis is presented to unveil the origins of the observed differences between the CRE and mainstream similarity indices.

  7. Particle physics contribution to the elimination of nuclear waste

    CERN Document Server

    Revol, Jean Pierre Charles

    2000-01-01

    Progress in particle accelerator technology makes it possible to use a proton accelerator to eliminate nuclear waste efficiently. The Energy Amplifier (EA) proposed by C. Rubbia and his group is a subcritical system driven by a proton accelerator. It is particularly attractive for destroying, through fission, transuranic elements produced by present nuclear reactors. The EA could also transform efficiently and at minimal cost long-lived fission fragments using the concept of Adiabatic Resonance Crossing (ARC) recently tested at CERN with the TARC experiment. The ARC concept can be extended to several other application domains (radioactive isotopes production for medicine and industry, neutron research applications, etc.).

  8. Neonatal tetanus elimination in Pakistan: progress and challenges.

    Science.gov (United States)

    Lambo, Jonathan A; Nagulesapillai, Tharsiya

    2012-12-01

    Pakistan is one of the 34 countries that have not achieved the neonatal tetanus (NT) global elimination target set by the World Health Organization (WHO). NT, caused by Clostridium tetani, is a highly fatal infection of the neonatal period. It is one of the most underreported diseases and remains a major but preventable cause of neonatal and infant mortality in many developing countries. In 1989, the World Health Assembly called for the elimination of NT by 1995, and since then considerable progress has been made using the following strategies: clean delivery practices, routine tetanus toxoid (TT) immunization of pregnant women, and immunization of all women of childbearing age with three doses of TT vaccine in high-risk areas during supplementary immunization campaigns. This review presents the activities, progress, and challenges in achieving NT elimination in Pakistan. A review of the literature found TT vaccination coverage in Pakistan ranged from 60% to 74% over the last decade. Low vaccination coverage, the main driver for NT in Pakistan, is due to many factors, including demand failure for TT vaccine resulting from inadequate knowledge of TT vaccine among reproductive age females and inadequate information about the benefits of TT provided by health care workers and the media. Other factors linked to low vaccination coverage include residing in rural areas, lack of formal education, poor knowledge about place and time to get vaccinated, and lack of awareness about the importance of vaccination. A disparity exists in TT vaccination coverage and antenatal care between urban and rural areas due to access and utilization of health care services. NT reporting is incomplete, as cases from the private sector and rural areas are underreported. To successfully eliminate NT, women of reproductive age must be made aware of the benefits of TT vaccine, not only to themselves, but also to their families. Effective communication strategies for TT vaccine delivery and

  9. Innovative use of a mist eliminator in mine ventilation

    International Nuclear Information System (INIS)

    Boyko, K.; Smith, T.

    2010-01-01

    The McArthur River Operation recently installed an upcast mine ventilation system to increase its total mine ventilation capacity. During commissioning, the amount of water discharged by the new system exceeded that which is normally observed in similar installations. Operation of the system was suspended, and a study was conducted to determine to most effective technology to significantly reduce or remove this water from the saturated air stream. A chevron-type mist eliminator was designed and installed to strip the water from the air, such that the condensate could be appropriately managed in the mine effluent treatment system. (author)

  10. Effect of layout on surge line thermal stratification

    International Nuclear Information System (INIS)

    Lai Jianyong; Huang Wei

    2011-01-01

    In order to analyze and evaluate the effect of layout on the thermal stratification for PWR Pressurizer surge line, numerical simulation by Computational Fluid Dynamics (CFD) method is taken on 6 kinds of layout improvement with 2 improvement schemes, i.e., increasing the obliquity of quasi horizontal section and adding a vertical pipe between the quasi horizontal section and next elbow, and the maximum temperature differences of quasi horizontal section of surge line of various layouts under different flowrate are obtained. The comparison shows that, the increasing of the obliquity of quasi horizontal section can mitigate the thermal stratification phenomena but can not eliminate this phenomena, while the adding of a vertical pipe between the quasi horizontal section and next elbow can effectively mitigate and eliminate the thermal stratification phenomena. (authors)

  11. Prospects for Malaria Elimination in Mesoamerica and Hispaniola

    Science.gov (United States)

    Herrera, Sócrates; Ochoa-Orozco, Sergio Andrés; González, Iveth J.; Peinado, Lucrecia; Quiñones, Martha L.; Arévalo-Herrera, Myriam

    2015-01-01

    Malaria remains endemic in 21 countries of the American continent with an estimated 427,000 cases per year. Approximately 10% of these occur in the Mesoamerican and Caribbean regions. During the last decade, malaria transmission in Mesoamerica showed a decrease of ~85%; whereas, in the Caribbean region, Hispaniola (comprising the Dominican Republic [DR] and Haiti) presented an overall rise in malaria transmission, primarily due to a steady increase in Haiti, while DR experienced a significant transmission decrease in this period. The significant malaria reduction observed recently in the region prompted the launch of an initiative for Malaria Elimination in Mesoamerica and Hispaniola (EMMIE) with the active involvement of the National Malaria Control Programs (NMCPs) of nine countries, the Regional Coordination Mechanism (RCM) for Mesoamerica, and the Council of Health Ministries of Central America and Dominican Republic (COMISCA). The EMMIE initiative is supported by the Global Fund for Aids, Tuberculosis and Malaria (GFATM) with active participation of multiple partners including Ministries of Health, bilateral and multilateral agencies, as well as research centers. EMMIE’s main goal is to achieve elimination of malaria transmission in the region by 2020. Here we discuss the prospects, challenges, and research needs associated with this initiative that, if successful, could represent a paradigm for other malaria-affected regions. PMID:25973753

  12. Preventive measures to eliminate asbestos-related diseases in singapore.

    Science.gov (United States)

    Lim, John Wah; Koh, David; Khim, Judy Sng Gek; Le, Giang Vinh; Takahashi, Ken

    2011-09-01

    The incidence of asbestos-related diseases (ARD) has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman's Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.

  13. Preventive Measures to Eliminate Asbestos-Related Diseases in Singapore

    Directory of Open Access Journals (Sweden)

    John Wah Lim

    2011-09-01

    Full Text Available The incidence of asbestos-related diseases (ARD has increased in the last four decades. In view of the historical use of asbestos in Singapore since the country started banning it in phases in 1989 and the long latency of the disease, the incidence of ARD can be expected to increase further. As occupational exposure to asbestos still occurs, preventive measures to eliminate ARD continue to be required to protect the health of both workers and the public from asbestos exposure. The majority of occupational exposures to asbestos at present occur during the removal of old buildings. Preventive measures have been utilized by different government ministries and agencies in eliminating ARD in Singapore over the past 40 years. These measures have included the enforcement of legislation, substitution with safer materials, and engineering controls during asbestos removal as well as improvements in personal hygiene and the use of personal protective equipment. The existing Workman’s Compensation System for ARD should be further refined, given that is currently stipulates that claims for asbestosis and malignant mesothelioma be made within 36 and 12 months after ceasing employment.

  14. Onchocerciasis in the Americas: from arrival to (near) elimination.

    Science.gov (United States)

    Gustavsen, Ken; Hopkins, Adrian; Sauerbrey, Mauricio

    2011-10-25

    Onchocerciasis (river blindness) is a blinding parasitic disease that threatens the health of approximately 120 million people worldwide. While 99% of the population at-risk for infection from onchocerciasis live in Africa, some 500,000 people in the Americas are also threatened by infection. A relatively recent arrival to the western hemisphere, onchocerciasis was brought to the New World through the slave trade and spread through migration. The centuries since its arrival have seen advances in diagnosing, mapping and treating the disease. Once endemic to six countries in the Americas (Brazil, Colombia, Ecuador, Guatemala, Mexico and Venezuela), onchocerciasis is on track for interruption of transmission in the Americas by 2012, in line with Pan American Health Organization resolution CD48.R12. The success of this public health program is due to a robust public-private partnership involving national governments, local communities, donor organizations, intergovernmental bodies, academic institutions, non-profit organizations and the pharmaceutical industry. The lessons learned through the efforts in the Americas are in turn informing the program to control and eliminate onchocerciasis in Africa. However, continued support and investment are needed for program implementation and post-treatment surveillance to protect the gains to-date and ensure complete elimination is achieved and treatment can be safely stopped within all 13 regional foci.

  15. Onchocerciasis in the Americas: from arrival to (near elimination

    Directory of Open Access Journals (Sweden)

    Sauerbrey Mauricio

    2011-10-01

    Full Text Available Abstract Onchocerciasis (river blindness is a blinding parasitic disease that threatens the health of approximately 120 million people worldwide. While 99% of the population at-risk for infection from onchocerciasis live in Africa, some 500,000 people in the Americas are also threatened by infection. A relatively recent arrival to the western hemisphere, onchocerciasis was brought to the New World through the slave trade and spread through migration. The centuries since its arrival have seen advances in diagnosing, mapping and treating the disease. Once endemic to six countries in the Americas (Brazil, Colombia, Ecuador, Guatemala, Mexico and Venezuela, onchocerciasis is on track for interruption of transmission in the Americas by 2012, in line with Pan American Health Organization resolution CD48.R12. The success of this public health program is due to a robust public-private partnership involving national governments, local communities, donor organizations, intergovernmental bodies, academic institutions, non-profit organizations and the pharmaceutical industry. The lessons learned through the efforts in the Americas are in turn informing the program to control and eliminate onchocerciasis in Africa. However, continued support and investment are needed for program implementation and post-treatment surveillance to protect the gains to-date and ensure complete elimination is achieved and treatment can be safely stopped within all 13 regional foci.

  16. The elimination of ray tracing in Monte Carlo shielding programs

    International Nuclear Information System (INIS)

    Bendall, D.E.

    1988-01-01

    The MONK6 code has clearly demonstrated the advantages of hole tracking, which was devised by Woodcock et at. for use in criticality codes from earlier work by Von Neumann. Hole tracking eliminates ray tracing by introducing, for all materials present in the problem, a pseudo scattering reaction that forward scatters without energy loss. The cross section for this reaction is chosen so that the total cross sections for all the materials are equal at a given energy. By this means, tracking takes place with a constant total cross section everywhere, so there is now no need to ray trace. The present work extends hole tracking to shielding codes, where it functions in tandem with Russian roulette and splitting. An algorithm has been evolved and its performance is compared with the ray-tracking code McBEND. A disadvantage with hole tracking occurs when there is a wide variation in total cross section for materials present. As the tracking uses the total cross section of the material that has the maximum cross section, there can be a large number of pseudo collisions in the materials with low total cross sections. In extreme cases, the advantages of hole tracking can be lost by the by the extra time taken in servicing these pseudo collisions; however, techniques for eliminating this problem are under consideration

  17. Adjustable liquid aperture to eliminate undesirable light in holographic projection.

    Science.gov (United States)

    Wang, Di; Liu, Chao; Li, Lei; Zhou, Xin; Wang, Qiong-Hua

    2016-02-08

    In this paper, we propose an adjustable liquid aperture to eliminate the undesirable light in a holographic projection. The aperture is based on hydrodynamic actuation. A chamber is formed with a cylindrical tube. A black droplet is filled in the sidewall of the cylinder tube and the outside space is the transparent oil which is immiscible with the black droplet. An ultrathin glass sheet is attached on the bottom substrate of the device and a black shading film is secured to the central area of the glass sheet. By changing the volume of the black droplet, the black droplet will move to the middle or sidewall due to hydrodynamic actuation, so the device can be used as an adjustable aperture. A divergent spherical wave and a solid lens are used to separate the focus planes of the reconstructed image and diffraction beams induced by the liquid crystal on silicon in the holographic projection. Then the aperture is used to eliminate the diffraction beams by adjusting the size of the liquid aperture and the holographic projection does not have undesirable light.

  18. Towards the complete prohibition and elimination of nuclear weapons

    International Nuclear Information System (INIS)

    Xie Zhiqiong

    1998-01-01

    For 40 years, the Pugwash Conference on Science and world affairs has been making unremitting efforts to achieve it main objectives the struggle to eliminate nuclear weapons, the elimination of wars and maintenance of world peace. The end of the Cold War vigorously encouraged world efforts in arms control and disarmament. On the day of exploding her first nuclear bomb in October 1964, China declared solemnly that it would never be the first to use nuclear weapons at any time under any circumstances. China has also committed unconditionally not to use nuclear weapons or threaten to use nuclear weapons against non-nuclear weapon states and nuclear free zones. China is the sole nuclear weapon state that has made this commitment, and she has kept her word. China is in favour of comprehensive nuclear test ban in the move towards complete nuclear disarmament, taking an active part in the CTBT negotiations in Geneva and contributing to the conclusion of a fair, reasonable, verifiable treaty of universal adherence and unlimited duration within this year

  19. Endgame: engaging the tobacco industry in its own elimination.

    Science.gov (United States)

    Ioannidis, John P A; Henriksen, Lisa; Prochaska, Judith J

    2013-12-01

    A billion deaths from tobacco are expected by 2100. Many policy interventions such as increased taxation, restrictions on advertisement, smoking bans, as well as behavioral interventions, such as pharmacological and psychological treatments for smoking cessation, decrease tobacco use, but they reach their limits. Endgame scenarios focusing on tobacco supply rather than demand are increasingly discussed, but meet with resistance by the industry and even by many tobacco control experts. A main stumbling block that requires more attention is what to do with the tobacco industry in endgame scenarios. This industry has employed notoriously talented experts in law, business, organization, marketing, advertising, strategy, policy, and statistics and has tremendous lobbying power. Performance-based regulatory approaches can pose a legal obligation on manufacturers to decrease - and eventually - eliminate tobacco products according to specified schedules. Penalties and rewards can make such plans both beneficial for public health and attractive to the companies that do the job well. We discuss caveats and reality checks of engaging the tobacco industry to eliminate its current market and change focus. Brainstorming is warranted to entice the industry to abandon tobacco for other profit goals. To get the dialogue started, we propose the wild possibility of hiring former tobacco companies to reduce the costs of healthcare, thereby addressing concurrently two major challenges to public health. © 2013 Stichting European Society for Clinical Investigation Journal Foundation. Published by John Wiley & Sons Ltd.

  20. A Decision Logic Approach to Mill’s Eliminative Induction

    Directory of Open Access Journals (Sweden)

    Piętka Dariusz

    2015-09-01

    Full Text Available The subject of the paper is a contemporary interpretation of J.S. Mill’s elimination method using selected concepts of Zdzisław Pawlak’s decision logic. The aim of the interpretation is to reformulate the original rules (canons of Mill’s induction so that they correspond more precisely to his concept of cause as a complex sufficient condition. In the first part of the paper, we turn to Mill’s writings and justify the thesis that in his understanding the cause is an aggregation of circumstances, and not a single circumstance; next, we point out that Mill’s original canons (for example the canon of agreement and the canon of difference do not allow causes-aggregations to be singled out from empirical data. In the second part of this paper, we present such aspects of Z. Pawlak’s decision logic that serve as the basis for the formalisation of the method of eliminative induction. We describe exhaustively the schema of induction that involves a gradual - divided into three stages - simplification of a set of implications corresponding to the observed dependencies [system of potential causes, effect]. The simplification is deductive because it maintains consistency within the set of implications. We show that such schema is ideal for isolating complex causes (aggregations of circumstances, ultimately described using complex conditional formulas of decision logic.

  1. Successful efforts toward elimination iodine deficiency disorders in India

    Directory of Open Access Journals (Sweden)

    Kapil Umesh

    2010-01-01

    Full Text Available Iodine deficiency (ID is the world′s single most important preventable cause of brain damage and mental retardation. Iodine deficiency disorders (IDDs is a public health problem in 130 countries, affecting 13% of the world population. The simplest solution to prevent the IDD is to consume iodized common salt every day. In India, significant progress has been achieved toward elimination of IDD, in the last 30 years. Satisfactory levels of urinary iodine excretion and iodine content of salt have been documented by the research surveys conducted by research scientists. The results indicate that we are progressing toward elimination of IDD. IDD is due to a nutritional deficiency, which is prima-rily that of iodine, in soil and water. IDD is known to re-appear if the IDD Control Program is not sustained. To ensure that the population continues to have intake of adequate amount of iodine, there is a need of i periodic surveys to assess the magnitude of the IDD with respect to impact of iodized salt (IS intervention; ii strengthening the health and nutrition education activities to create demand for IS and iii development of a monitoring information system (MIS for ensuring that the adequately IS is available to the beneficiaries.

  2. Targeting Plasmodium PI(4)K to eliminate malaria

    Science.gov (United States)

    McNamara, Case W.; Lee, Marcus C. S.; Lim, Chek Shik; Lim, Siau Hoi; Roland, Jason; Nagle, Advait; Simon, Oliver; Yeung, Bryan K. S.; Chatterjee, Arnab K.; McCormack, Susan L.; Manary, Micah J.; Zeeman, Anne-Marie; Dechering, Koen J.; Kumar, T. R. Santha; Henrich, Philipp P.; Gagaring, Kerstin; Ibanez, Maureen; Kato, Nobutaka; Kuhen, Kelli L.; Fischli, Christoph; Rottmann, Matthias; Plouffe, David M.; Bursulaya, Badry; Meister, Stephan; Rameh, Lucia; Trappe, Joerg; Haasen, Dorothea; Timmerman, Martijn; Sauerwein, Robert W.; Suwanarusk, Rossarin; Russell, Bruce; Renia, Laurent; Nosten, Francois; Tully, David C.; Kocken, Clemens H. M.; Glynne, Richard J.; Bodenreider, Christophe; Fidock, David A.; Diagana, Thierry T.; Winzeler, Elizabeth A.

    2013-12-01

    Achieving the goal of malaria elimination will depend on targeting Plasmodium pathways essential across all life stages. Here we identify a lipid kinase, phosphatidylinositol-4-OH kinase (PI(4)K), as the target of imidazopyrazines, a new antimalarial compound class that inhibits the intracellular development of multiple Plasmodium species at each stage of infection in the vertebrate host. Imidazopyrazines demonstrate potent preventive, therapeutic, and transmission-blocking activity in rodent malaria models, are active against blood-stage field isolates of the major human pathogens P. falciparum and P. vivax, and inhibit liver-stage hypnozoites in the simian parasite P. cynomolgi. We show that imidazopyrazines exert their effect through inhibitory interaction with the ATP-binding pocket of PI(4)K, altering the intracellular distribution of phosphatidylinositol-4-phosphate. Collectively, our data define PI(4)K as a key Plasmodium vulnerability, opening up new avenues of target-based discovery to identify drugs with an ideal activity profile for the prevention, treatment and elimination of malaria.

  3. QUEST: Eliminating Online Supervised Learning for Efficient Classification Algorithms

    Directory of Open Access Journals (Sweden)

    Ardjan Zwartjes

    2016-10-01

    Full Text Available In this work, we introduce QUEST (QUantile Estimation after Supervised Training, an adaptive classification algorithm for Wireless Sensor Networks (WSNs that eliminates the necessity for online supervised learning. Online processing is important for many sensor network applications. Transmitting raw sensor data puts high demands on the battery, reducing network life time. By merely transmitting partial results or classifications based on the sampled data, the amount of traffic on the network can be significantly reduced. Such classifications can be made by learning based algorithms using sampled data. An important issue, however, is the training phase of these learning based algorithms. Training a deployed sensor network requires a lot of communication and an impractical amount of human involvement. QUEST is a hybrid algorithm that combines supervised learning in a controlled environment with unsupervised learning on the location of deployment. Using the SITEX02 dataset, we demonstrate that the presented solution works with a performance penalty of less than 10% in 90% of the tests. Under some circumstances, it even outperforms a network of classifiers completely trained with supervised learning. As a result, the need for on-site supervised learning and communication for training is completely eliminated by our solution.

  4. Carbon elimination from silicon kerf: Thermogravimetric analysis and mechanistic considerations.

    Science.gov (United States)

    Vazquez-Pufleau, Miguel; Chadha, Tandeep S; Yablonsky, Gregory; Biswas, Pratim

    2017-01-18

    40% of ultrapure silicon is lost as kerf during slicing to produce wafers. Kerf is currently not being recycled due to engineering challenges and costs associated with removing its abundant impurities. Carbon left behind from the lubricant remains as one of the most difficult contaminants to remove in kerf without significant silicon oxidation. The present work enables to better understand the mechanism of carbon elimination in kerf which can aid the design of better processes for kef recycling and low cost photovoltaics. In this paper, we studied the kinetics of carbon elimination from silicon kerf in two atmospheres: air and N 2, under a regime of no-diffusion-limitation. We report the apparent activation energy in both atmospheres using three methods: Kissinger, and two isoconversional approaches. In both atmospheres, a bimodal apparent activation energy is observed, suggesting a two stage process. A reaction mechanism is proposed in which (a) C-C and C-O bond cleavage reactions occur in parallel with polymer formation; (b) at higher temperatures, this polymer fully degrades in air but leaves a tarry residue in N 2 that accounts for about 12% of the initial total carbon.

  5. Standby-Loss Elimination in Server Power Supply

    Directory of Open Access Journals (Sweden)

    Jong-Woo Kim

    2017-07-01

    Full Text Available In a server power system, a standby converter is required in order to provide the standby output, monitor the system’s status, and communicate with the server power system. Since these functions are always required, losses from the standby converter are produced even though the system operates in normal mode. For these reasons, the losses deteriorate the total efficiency of the system. In this paper, a new structure is proposed to eliminate the losses from the standby converter of a server power supply. The key feature of the proposed structure is that the main direct current (DC/DC converter substitutes all of the output power of the standby converter, and the standby converter is turned off in normal mode. With the proposed structure, the losses from the standby converter can be eliminated in normal mode, and this leads to a higher efficiency in overall load conditions. Although the structure has been proposed in the previous work, very important issues such as a steady state analysis, the transient responses, and how to control the standby converter are not discussed. This paper presents these issues further. The feasibility of the proposed structure has been verified with 400 V link voltage, 12 V/62.5 A main output, and a 12 V/2.1 A standby output server power system.

  6. QUEST: Eliminating Online Supervised Learning for Efficient Classification Algorithms.

    Science.gov (United States)

    Zwartjes, Ardjan; Havinga, Paul J M; Smit, Gerard J M; Hurink, Johann L

    2016-10-01

    In this work, we introduce QUEST (QUantile Estimation after Supervised Training), an adaptive classification algorithm for Wireless Sensor Networks (WSNs) that eliminates the necessity for online supervised learning. Online processing is important for many sensor network applications. Transmitting raw sensor data puts high demands on the battery, reducing network life time. By merely transmitting partial results or classifications based on the sampled data, the amount of traffic on the network can be significantly reduced. Such classifications can be made by learning based algorithms using sampled data. An important issue, however, is the training phase of these learning based algorithms. Training a deployed sensor network requires a lot of communication and an impractical amount of human involvement. QUEST is a hybrid algorithm that combines supervised learning in a controlled environment with unsupervised learning on the location of deployment. Using the SITEX02 dataset, we demonstrate that the presented solution works with a performance penalty of less than 10% in 90% of the tests. Under some circumstances, it even outperforms a network of classifiers completely trained with supervised learning. As a result, the need for on-site supervised learning and communication for training is completely eliminated by our solution.

  7. Alemtuzumab-induced elimination of HIV-1-infected immune cells.

    Science.gov (United States)

    Ruxrungtham, Kiat; Sirivichayakul, Sunee; Buranapraditkun, Supranee; Krause, Werner

    2016-01-01

    Currently, there is no drug known that is able to eradicate either HIV or HIV-infected host cells. The effectiveness of all available treatments is based on the prevention of viral replication. We investigated whether the monoclonal, CD52 receptor-targeting antibody, alemtuzumab, which is currently approved for the treatment of multiple sclerosis, is able to eliminate HIV-infected immune cells. In blood samples from healthy donors and from HIV-1-infected subjects who were either treatment-naïve or resistant to HAART, we studied whether the CD52 expression on T cells and their subsets (CD3, CD4, CD8), B cells (CD19), dendritic cells (CD123) and monocytes (CD11c) is retained in HIV-1 infection and whether alemtuzumab is able to eradicate infected cells, using four-colour flow cytometry. We found that CD52 expression on immune cells is retained in HIV-1 infection regardless of CD4 cell count, viral load and treatment status, and is amenable to alemtuzumab-induced depletion. For the first time it could be shown in vitro that HIV-1-infected immune cells can be eliminated by using the monoclonal antibody alemtuzumab.

  8. Programmed elimination of neutronic poisons in nuclear reactors

    International Nuclear Information System (INIS)

    Perriere, G. de la

    1967-11-01

    This work deals with the use of salts of elements having a large neutron capture cross-section, so-called 'soluble poisons' which are dissolved in the moderating water to control the reactivity of heavy-water reactors, and more particularly to compensate the xenon effect in the reactor EL 4. The report describes the controlled elimination of these poisons by fixation on ion-exchange resins. The poisons considered are lithium-6, cadmium and gadolinium in the sulphate form, and boron as boric acid. The thermodynamic and kinetic constants of the ion-exchange reactions were first determined and a study was then made of the fixation of these compounds in beds of small-calibre resins placed in columns. Lithium-6 is the poison which is most easily applicable to compensate the xenon effect in the reactor EL 4. It can be eliminated rapidly and completely from heavy water, and its use does not lead to supplementary problems of protection against the gamma radiation of the reactor circuits. (author) [fr

  9. Thermalization of squeezed states

    International Nuclear Information System (INIS)

    Solomon, Allan I

    2005-01-01

    Starting with a thermal squeezed state defined as a conventional thermal state based on an appropriate Hamiltonian, we show how an important physical property, the signal-to-noise ratio, is degraded, and propose a simple model of thermalization (Kraus thermalization)

  10. Thermal spin pumping mediated by magnons in the semiclassical regime

    International Nuclear Information System (INIS)

    Nakata, Kouki

    2012-01-01

    We microscopically analyze thermal spin pumping mediated by magnons, at the interface between a ferromagnetic insulator and a non-magnetic metal, in the semiclassical regime. The generation of a spin current is discussed by calculating the thermal spin transfer torque, which breaks the spin conservation law for conduction electrons and operates the coherent magnon state. Inhomogeneous thermal fluctuations between conduction electrons and magnons induce a net spin current, which is pumped into the adjacent non-magnetic metal. The pumped spin current is proportional to the temperature difference. When the effective temperature of magnons is lower than that of conduction electrons, localized spins lose spin angular momentum by emitting magnons and conduction electrons flip from down to up by absorbing all the emitted momentum, and vice versa. Magnons at the zero mode cannot contribute to thermal spin pumping because they are eliminated by the spin-flip condition. Consequently thermal spin pumping does not cost any kind of applied magnetic fields

  11. Cryogenic cooler thermal coupler

    International Nuclear Information System (INIS)

    Green, K.E.; Talbourdet, J.A.

    1984-01-01

    A thermal coupler assembly mounted to the coldfinger of a cryogenic cooler which provides improved thermal transfer between the coldfinger and the detector assembly mounted on the dewar endwell. The thermal coupler design comprises a stud and spring-loaded cap mounted on the coldfinger assembly. Thermal transfer is made primarily through the air space between the cap and coldwell walls along the radial surfaces. The cap is spring loaded to provide thermal contact between the cap and endwell end surfaces

  12. Reexamination of basal plane thermal conductivity of suspended graphene samples measured by electro-thermal micro-bridge methods

    Directory of Open Access Journals (Sweden)

    Insun Jo

    2015-05-01

    Full Text Available Thermal transport in suspended graphene samples has been measured in prior works and this work with the use of a suspended electro-thermal micro-bridge method. These measurement results are analyzed here to evaluate and eliminate the errors caused by the extrinsic thermal contact resistance. It is noted that the room-temperature thermal resistance measured in a recent work increases linearly with the suspended length of the single-layer graphene samples synthesized by chemical vapor deposition (CVD, and that such a feature does not reveal the failure of Fourier’s law despite the increase in the reported apparent thermal conductivity with length. The re-analyzed apparent thermal conductivity of a single-layer CVD graphene sample reaches about 1680 ± 180 W m−1 K−1 at room temperature, which is close to the highest value reported for highly oriented pyrolytic graphite. In comparison, the apparent thermal conductivity values measured for two suspended exfoliated bi-layer graphene samples are about 880 ± 60 and 730 ± 60 Wm−1K−1 at room temperature, and approach that of the natural graphite source above room temperature. However, the low-temperature thermal conductivities of these suspended graphene samples are still considerably lower than the graphite values, with the peak thermal conductivities shifted to much higher temperatures. Analysis of the thermal conductivity data reveals that the low temperature behavior is dominated by phonon scattering by polymer residue instead of by the lateral boundary.

  13. Alan Turing and the origins of modern Gaussian elimination

    Directory of Open Access Journals (Sweden)

    Dopico, Froilán M.

    2013-12-01

    Full Text Available The solution of a system of linear equations is by far the most important problem in Applied Mathematics. It is important both in itself and because it is an intermediate step in many other important problems. Gaussian elimination is nowadays the standard method for solving this problem numerically on a computer and it was the first numerical algorithm to be subjected to rounding error analysis. In 1948, Alan Turing published a remarkable paper on this topic: “Rounding-off errors in matrix processes” (Quart. J. Mech. Appl. Math. 1, pp. 287-308. In this paper, Turing formulated Gaussian elimination as the matrix LU factorization and introduced the “condition number of a matrix”, both of them fundamental notions of modern Numerical Analysis. In addition, Turing presented an error analysis of Gaussian elimination for general matrices that deeply influenced the spirit of the definitive analysis developed by James Wilkinson in 1961. Alan Turing’s work on Gaussian elimination appears in a fascinating period for modern Numerical Analysis. Other giants of Mathematics, as John von Neumann, Herman Goldstine, and Harold Hotelling were also working in the mid-1940s on Gaussian elimination. The goal of these researchers was to find an efficient and reliable method for solving systems of linear equations in modern “automatic computers”. At that time, it was not clear at all whether Gaussian elimination was a right choice or not. The purpose of this paper is to revise, at an introductory level, the contributions of Alan Turing and other authors to the error analysis of Gaussian elimination, the historical context of these contributions, and their influence on modern Numerical Analysis.La resolución de sistemas de ecuaciones lineales es sin duda el problema más importante en Matemática Aplicada. Es importante en sí mismo y también porque es un paso intermedio en la resolución de muchos otros problemas de gran relevancia. La eliminaci

  14. Recording {gamma} spectrometer with elimination of compton background; Spectrographe {gamma} enregistreur avec elimination du bruit de fond compton

    Energy Technology Data Exchange (ETDEWEB)

    Julliot, C [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1960-07-01

    This instrument, derived from the recording {gamma} spectrograph, gives better definition of photoelectric peaks by elimination of pulses caused by {gamma} photons incompletely absorbed in the scintillator (Compton effect). This system uses an original method devised by Peirson: the spectrum, devoid of photoelectric peak, supplied by a detector equipped with an anthracene scintillator, is cut off from the spectrum provided by a conventional detector equipped with a Nal (T1) scintillator. The regulation of the mechanical system, detector support and source allows the detection yields to be adjusted. The electronic system is identical in presentation with that of the recording spectrograph. (author) [French] Cet appareil derive du spectrographe {gamma} enregistreur permet d'obtenir une meilleure definition des pics photoelectriques, par elimination des impulsions provenant des photons {gamma} incompletement absorbes dans le scintillateur (effet Compton). Cet ensemble met en oeuvre une methode originale due a Peirson: le spectre, depourvu de pic photoelectrique, fourni par un detecteur, equipe avec un scintillateur d'anthracene, est retranche du spectre donne par un detecteur classique, equipe avec un scintillateur de NaI (T1). Le reglage de l'ensemble mecanique, support des detecteurs et de la source, permet d'ajuster les rendements de detection. L'ensemble electronique se presente sous un aspect identique a celui du spectrographe enregistreur. (auteur)

  15. Elimination of heavy metals from leachates by membrane electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, R. [Technische Universitaet Dresden, Institut fuer Siedlungs- und Industriewasserwirtschaft, Mommsenstrasse 13, 01062 Dresden (Germany); Seidel, H. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Department Bioremediation, Permoserstrasse 15, D-04318 Leipzig (Germany); Rahner, D. [Technische Universitaet Dresden, Institut fuer Physikalische Chemie und Eektrochemie, Mommsenstrasse 13, D-01062 Dresden (Germany); Morgenstern, P. [UFZ-Umweltforschungszentrum Leipzig-Halle GmbH, Department Analytik, Permoserstrasse 15, D-04318 Leipzig (Germany); Loeser, C. [Technische Universitaet Dresden, Institut fuer Lebensmittel- und Bioverfahrenstechnik, Bergstrasse 120, D-01062 Dresden (Germany)

    2004-10-01

    The elimination of heavy metals from bioleaching process waters (leachates) by electrolysis was studied in the anode and cathode region of a membrane electrolysis cell at current densities of 5-20 mA/cm{sup 2} using various electrode materials. The leaching waters containing a wide range of dissolved heavy metals, were high in sulfate, and had pH values of approx. 3. In preliminary tests using a rotating disc electrode the current density-potential curve (CPK) was recorded at a rotation velocity of 0, 1000 and 2000 rpm and a scan rate of 10 mV/s in order to collect information on the influence of transport processes on the electrochemical processes taking place at the electrodes. The electrochemical deposition-dissolution processes at the cathode are strongly dependent on the hydrodynamics. Detailed examination of the anodic oxidation of dissolved Mn(II) indicated that the manganese dioxide which formed adhered well to the electrode surface but in the cathodic return run it was again reduced. Electrode pairs of high-grade steel, lead and coal as well as material combinations were used to investigate heavy metal elimination in a membrane electrolysis cell. Using high-grade steel, lead and carbon electrode pairs, the reduction and deposition of Cu, Zn, Cr, Ni and some Cd in metallic or hydroxide form were observed in an order of 10-40 % in the cathode chamber. The dominant process in the anode chamber was the precipitation of manganese dioxide owing to the oxidation of dissolved Mn(II). Large amounts of heavy metals were co-precipitated by adsorption onto the insoluble MnO{sub 2}. High-grade steel and to some extent lead anodes were dissolved and hence were proven unsuitable as an anode material. These findings were largely confirmed by experiments using combination electrodes of coal and platinized titanium as an anode material and steel as a cathode material.The results indicate that electrochemical metal separation in the membrane electrolysis cell can represent a

  16. Elimination of Taenia solium Transmission in Northern Peru.

    Science.gov (United States)

    Garcia, Hector H; Gonzalez, Armando E; Tsang, Victor C W; O'Neal, Seth E; Llanos-Zavalaga, Fernando; Gonzalvez, Guillermo; Romero, Jaime; Rodriguez, Silvia; Moyano, Luz M; Ayvar, Viterbo; Diaz, Andre; Hightower, Allen; Craig, Philip S; Lightowlers, Marshall W; Gauci, Charles G; Leontsini, Elli; Gilman, Robert H

    2016-06-16

    Taeniasis and cysticercosis are major causes of seizures and epilepsy. Infection by the causative parasite Taenia solium requires transmission between humans and pigs. The disease is considered to be eradicable, but data on attempts at regional elimination are lacking. We conducted a three-phase control program in Tumbes, Peru, to determine whether regional elimination would be feasible. We systematically tested and compared elimination strategies to show the feasibility of interrupting the transmission of T. solium infection in a region of highly endemic disease in Peru. In phase 1, we assessed the effectiveness and feasibility of six intervention strategies that involved screening of humans and pigs, antiparasitic treatment, prevention education, and pig replacement in 42 villages. In phase 2, we compared mass treatment with mass screening (each either with or without vaccination of pigs) in 17 villages. In phase 3, we implemented the final strategy of mass treatment of humans along with the mass treatment and vaccination of pigs in the entire rural region of Tumbes (107 villages comprising 81,170 people and 55,638 pigs). The effect of the intervention was measured after phases 2 and 3 with the use of detailed necropsy to detect pigs with live, nondegenerated cysts capable of causing new infection. The necropsy sampling was weighted in that we preferentially included more samples from seropositive pigs than from seronegative pigs. Only two of the strategies implemented in phase 1 resulted in limited control over the transmission of T. solium infection, which highlighted the need to intensify the subsequent strategies. After the strategies in phase 2 were implemented, no cyst that was capable of further transmission of T. solium infection was found among 658 sampled pigs. One year later, without further intervention, 7 of 310 sampled pigs had live, nondegenerated cysts, but no infected pig was found in 11 of 17 villages, including all the villages in which mass

  17. Poliomyelitis and its elimination in Cuba: an historical overview.

    Science.gov (United States)

    Beldarraín, Enrique

    2013-04-01

    Polio was first detected in Cuba in the late 19th century among residents of the US community on the Isla de Pinos (Isle of Pines, now Isle of Youth), apparently introduced through migration from the USA. The first outbreak was reported in 1906 on the Isle, with the first epidemic reported in the former province of Las Villas in 1909. The epidemics subsequently intensified, by 1934 becoming periodic every four to five years, and accompanied by high morbidity, mortality and crippling sequelae, primarily among children. To review and analyze the history of polio and its control in Cuba, from the disease's first appearance in 1898 until WHO/PAHO certification of elimination in 1994. The historiological method was used; archival documents, medical records, and available polio morbidity and mortality statistics from the Ministry of Public Health's National Statistics Division before 1959 and from 1959 through 2000 were reviewed. Crude morbidity and mortality rates were calculated using population estimates at mid-period. Reports and scientific publications describing polio vaccination campaigns and their results were also reviewed, and key informants were interviewed. After initial introduction of polio in Cuba, five major epidemics occurred between 1932 and 1958: in 1934 (434 cases, 82 deaths); 1942 (494 cases, 58 deaths); 1946 (239 cases, 33 deaths), 1952 (492 cases, 15 deaths) and 1955 (267 cases, 8 deaths). Between 1957 and 1961 the disease's endemicity reached epidemic levels, with the last outbreak occurring in 1961, with 342 cases, 30% of them in children aged >4 years. In 1962, Cuba launched a nationwide polio vaccination campaign, the first of annual campaigns thereafter carried out in the framework of a coherent national program aimed at polio elimination. Using the Sabin oral vaccine and targeting the entire pediatric population in a single time period, five million doses were administered in the first campaign, reaching 87.5% of the target population aged 1

  18. Dynamic thermal environment and thermal comfort.

    Science.gov (United States)

    Zhu, Y; Ouyang, Q; Cao, B; Zhou, X; Yu, J

    2016-02-01

    Research has shown that a stable thermal environment with tight temperature control cannot bring occupants more thermal comfort. Instead, such an environment will incur higher energy costs and produce greater CO2 emissions. Furthermore, this may lead to the degeneration of occupants' inherent ability to combat thermal stress, thereby weakening thermal adaptability. Measured data from many field investigations have shown that the human body has a higher acceptance to the thermal environment in free-running buildings than to that in air-conditioned buildings with similar average parameters. In naturally ventilated environments, occupants have reported superior thermal comfort votes and much greater thermal comfort temperature ranges compared to air-conditioned environments. This phenomenon is an integral part of the adaptive thermal comfort model. In addition, climate chamber experiments have proven that people prefer natural wind to mechanical wind in warm conditions; in other words, dynamic airflow can provide a superior cooling effect. However, these findings also indicate that significant questions related to thermal comfort remain unanswered. For example, what is the cause of these phenomena? How we can build a comfortable and healthy indoor environment for human beings? This article summarizes a series of research achievements in recent decades, tries to address some of these unanswered questions, and attempts to summarize certain problems for future research. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. BRANCHIAL ELIMINATION OF SUPERHYDROPHOBIC ORGANIC COMPOUNDS BY RAINBOW TROUT (ONCORHYNCHUS MYKISS)

    Science.gov (United States)

    The branchial elimination of pentachloroethane and four congeneric polychlorinated bephenyls by rainbow trout was measured using a fish respirometer-metabolism chamber and an adsorption resin column. Branchial elimination was characterized by calculating a set of apparent in vivo...

  20. The Convention on the Elimination of All Forms of Discrimination Against Women (CEDAW): Congressional Issues

    National Research Council Canada - National Science Library

    Blanchfield, Luisa

    2008-01-01

    The U.N. Convention on the Elimination of All Forms of Discrimination Against Women calls for Parties to eliminate discrimination against women in all areas of life, including healthcare, education...

  1. The Convention on the Elimination of All Forms of Discrimination Against Women (CEDAW): Congressional Issues

    National Research Council Canada - National Science Library

    Blanchfield, Luisa

    2006-01-01

    The U.N. Convention on the Elimination of All Forms of Discrimination against Women calls for Parties to eliminate discrimination against women in all areas of life, including healthcare, education...

  2. The accumulation and elimination of 89Sr in tea leaves

    International Nuclear Information System (INIS)

    Zhang Yongxi; Wang Shouxiang; Chen Chuanqun; Sun Zhiming; Hu Bingmin; Huang Dan

    1995-01-01

    The 89 Sr was added to the tea tree-soil system by different ways. The 89 Sr in the system through the over-ground part of tea tree, was much more than that through soil. The 89 Sr concentration in older leaves was higher than in shoot for a definite treatment. The accumulation elimination law of 89 Sr in leaves varied with the treatments. For the treatment through the over-ground part, the 89 Sr concentration in older leaves and shoot was monotonously decreased with time increasing. But for the treatment through soil the 89 Sr concentration in shoot was increased to reach a peak value, and then decreased slowly; while the 89 Sr concentration in older leaves increased quickly in a period, then increased slowly to attain a saturated value. In addition, the concentration factor of 89 Sr in older leaves and shoot were determined

  3. Nuclear disarmament and the elimination of nuclear dangers

    International Nuclear Information System (INIS)

    McCoy, Ronald

    2002-01-01

    The question is whether the culture of militarism will be propagated further and whether the elimination of nuclear weapons will be politically feasible and technically practical, when security is still defined and rationalized in military terms, with nuclear weapons continuing to represent the ultimate guarantee of security. ... A new paradigm needs to be developed around policies that will address injustices and promote human security, by alleviating poverty and reversing socio-economic polarization, enhancing sustainable economic development, and controlling weapons proliferation and militarism. The world is bristling with armaments, paid for with resources stolen from schools and hospitals. Even the heavens are about to be assaulted as we contemplate the weaponization of outer space. (author)

  4. Client-server computer architecture saves costs and eliminates bottlenecks

    International Nuclear Information System (INIS)

    Darukhanavala, P.P.; Davidson, M.C.; Tyler, T.N.; Blaskovich, F.T.; Smith, C.

    1992-01-01

    This paper reports that workstation, client-server architecture saved costs and eliminated bottlenecks that BP Exploration (Alaska) Inc. experienced with mainframe computer systems. In 1991, BP embarked on an ambitious project to change technical computing for its Prudhoe Bay, Endicott, and Kuparuk operations on Alaska's North Slope. This project promised substantial rewards, but also involved considerable risk. The project plan called for reservoir simulations (which historically had run on a Cray Research Inc. X-MP supercomputer in the company's Houston data center) to be run on small computer workstations. Additionally, large Prudhoe Bay, Endicott, and Kuparuk production and reservoir engineering data bases and related applications also would be moved to workstations, replacing a Digital Equipment Corp. VAX cluster in Anchorage

  5. Adrenalectomy eliminates the extinction spike in autoshaping with rats.

    Science.gov (United States)

    Thomas, B L; Papini, M R

    2001-03-01

    Experiment 1, using rats, investigated the effect of adrenalectomy (ADX) on the invigoration of lever-contact performance that occurs in the autoshaping situation after a shift from acquisition to extinction (called the extinction spike). Groups of rats with ADX or sham operations were trained under spaced and massed conditions [average intertrial intervals (ITI) of either 15 or 90 s] for 10 sessions and then shifted to extinction. ADX did not affect acquisition training but it eliminated the extinction spike. Plasma corticosterone levels during acquisition were shown in Experiment 2 to be similar in rats trained under spaced or massed conditions. Adrenal participation in the emotional arousal induced by conditions of surprising nonreward (e.g., extinction) is discussed.

  6. Transformerless photovoltaic inverters with leakage current and pulsating power elimination

    DEFF Research Database (Denmark)

    Tang, Yi; Yao, Wenli; Wang, H.

    2015-01-01

    This paper presents a transformerless inverter topology, which is capable of simultaneously solving leakage current and pulsating power issues in grid-connected photovoltaic (PV) systems. Without adding any additional components to the system, the leakage current caused by the PV......-to-ground parasitic capacitance can be bypassed by introducing a common mode (CM) conducting path to the inverter. The resulting ground leakage current is therefore well controlled to be below the regulation limit. Moreover, the proposed inverter can also eliminate the well-known double line frequency pulsating power....... The mechanism of leakage current suppression and the closed-loop control of pulsating power decoupling are discussed in the paper in details. A 500 W prototype was also built and tested in the laboratory, and both simulation and experimental results are finally presented to show the excellent performance...

  7. Information filtering based on corrected redundancy-eliminating mass diffusion.

    Directory of Open Access Journals (Sweden)

    Xuzhen Zhu

    Full Text Available Methods used in information filtering and recommendation often rely on quantifying the similarity between objects or users. The used similarity metrics often suffer from similarity redundancies arising from correlations between objects' attributes. Based on an unweighted undirected object-user bipartite network, we propose a Corrected Redundancy-Eliminating similarity index (CRE which is based on a spreading process on the network. Extensive experiments on three benchmark data sets-Movilens, Netflix and Amazon-show that when used in recommendation, the CRE yields significant improvements in terms of recommendation accuracy and diversity. A detailed analysis is presented to unveil the origins of the observed differences between the CRE and mainstream similarity indices.

  8. Plastic scintillators based on polymers with eliminated excimer forming

    Energy Technology Data Exchange (ETDEWEB)

    Adadurov, A.F., E-mail: adadurov@isma.kharkov.u [Institute for Scintillating Materials NAN of Ukraine, 60 Lenin Ave, 61001 Kharkov (Ukraine); Yelyseev, D.A.; Titskaya, V.D.; Lebedev, V.N.; Zhmurin, P.N. [Institute for Scintillating Materials NAN of Ukraine, 60 Lenin Ave, 61001 Kharkov (Ukraine)

    2011-05-15

    Plastic scintillators (PS) were made based on benzyl methacrylate and methyl-methacrylate P(BzMA + MMA) copolymer in which the excimer forming rate is by two order lesser than that in polystyrene-based polymer matrix. Studying of these PS light yield demonstrates the importance of migration processes comparing to excimer formation. It is found that to obtain PS with high scintillation efficiency it is necessary to use the polymer base (matrix) in which excimer forming is eliminated but the migration process along the chromophores is maximally favored. To explain the accelerated energy transfer between phenyl chromophores it is proposed to use a mechanism of exchange of that virtual excitons that can propagate along a one-dimensional back-bone of polymer molecule. Clearing the details of mechanism of interaction between chromophores of polymer molecules which is responsible for accelerated radiationless energy transfer enable will determine in future the way of effective plastic scintillators designing.

  9. Ionizing Radiation for the Elimination of Salmonellae from Frozen Meat

    International Nuclear Information System (INIS)

    Ley, F.J.

    1968-01-01

    The radiation resistance in frozen meat of a number of different serotypes of Salmonella has been examined. A dose of 0.65 Mrad achieves a 10 6 reduction in the numbers of the most resistant types and this dose has been shown to be effective in eliminating salmonellae from naturally contaminated meat. Some results are outlined which show that (a) Salmonella resistance is higher in frozen meat than in unfrozen meat, (b) pre-irradiation growth of the organisms in meat does not influence resistance, (c) salmonellae surviving irradiation grow at a slower rate than unirradiated organisms and appear to be unchanged in serological properties or phage type. Reference is made to wholesomeness tests carried out on irradiated meat and to the current situation on legislation in the United Kingdom controlling the irradiation of food. The identification of irradiated food is also mentioned. (author)

  10. Method of eliminating cruds in the primary coolants of reactors

    International Nuclear Information System (INIS)

    Tamura, Takaaki.

    1984-01-01

    Purpose: To eliminate cruds in the primary coolants by using rind of onions or peanuts. Method: Since cruds contained in the reactor primary coolants increase the radioactive exposure to reactor operators, they have been intended to remove by ion exchange resins. In this invention, rind of onions or peanuts are crushed into an adequate particle size and packed into an absorption column instead of ion exchange resins into which primary coolants are circulated. The powderous onions or peanuts rind contain glucoside such as cosmosiin and has an effect of cationic exchanger, they satisfactorily catch heavy metals such as Fe and Cu. They have an excellent filtering effect even under a high pH condition and are excellent in economical point of view. They can be decrease the volume of the absorption column, reduce their devolume after use through corrosion and easily subjected to waste procession through oxidizing combustion in liquid. (Nakamoto, H.)

  11. Voltage harmonic elimination with RLC based interface smoothing filter

    International Nuclear Information System (INIS)

    Chandrasekaran, K; Ramachandaramurthy, V K

    2015-01-01

    A method is proposed for designing a Dynamic Voltage Restorer (DVR) with RLC interface smoothing filter. The RLC filter connected between the IGBT based Voltage Source Inverter (VSI) is attempted to eliminate voltage harmonics in the busbar voltage and switching harmonics from VSI by producing a PWM controlled harmonic voltage. In this method, the DVR or series active filter produces PWM voltage that cancels the existing harmonic voltage due to any harmonic voltage source. The proposed method is valid for any distorted busbar voltage. The operating VSI handles no active power but only harmonic power. The DVR is able to suppress the lower order switching harmonics generated by the IGBT based VSI. Good dynamic and transient results obtained. The Total Harmonic Distortion (THD) is minimized to zero at the sensitive load end. Digital simulations are carried out using PSCAD/EMTDC to validate the performance of RLC filter. Simulated results are presented. (paper)

  12. Anopheles Vectors in Mainland China While Approaching Malaria Elimination.

    Science.gov (United States)

    Zhang, Shaosen; Guo, Shaohua; Feng, Xinyu; Afelt, Aneta; Frutos, Roger; Zhou, Shuisen; Manguin, Sylvie

    2017-11-01

    China is approaching malaria elimination; however, well-documented information on malaria vectors is still missing, which could hinder the development of appropriate surveillance strategies and WHO certification. This review summarizes the nationwide distribution of malaria vectors, their bionomic characteristics, control measures, and related studies. After several years of effort, the area of distribution of the principal malaria vectors was reduced, in particular for Anopheles lesteri (synonym: An. anthropophagus) and Anopheles dirus s.l., which nearly disappeared from their former endemic regions. Anopheles sinensis is becoming the predominant species in southwestern China. The bionomic characteristics of these species have changed, and resistance to insecticides was reported. There is a need to update surveillance tools and investigate the role of secondary vectors in malaria transmission. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Elimination of striation in laser cutting of mild steel

    International Nuclear Information System (INIS)

    Sobih, M; Crouse, P L; Li, L

    2007-01-01

    High-power laser cutting is extensively used in many industrial applications. An important weakness of this process is the formation of striations (regular lines down the cut surface), which affect the quality of the surfaces produced. The elimination of striation formation is of considerable importance, since it could open up a variety of novel high-precision applications. This study presents the results of oxygen-assisted laser cutting of EN43 mild steel sheets, using a high-power fibre laser. Striation-free laser cuts are demonstrated for cutting 1 and 2 mm thick mild steel sheets. The optimal operating windows are presented and a mathematical method is proposed to estimate the critical speed at which striation-free cut can be obtained

  14. Elimination of striation in laser cutting of mild steel

    Energy Technology Data Exchange (ETDEWEB)

    Sobih, M; Crouse, P L; Li, L [Laser Processing Research Centre, School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Sackville Street Building, PO Box 88, Manchester M60 1QD (United Kingdom)

    2007-11-21

    High-power laser cutting is extensively used in many industrial applications. An important weakness of this process is the formation of striations (regular lines down the cut surface), which affect the quality of the surfaces produced. The elimination of striation formation is of considerable importance, since it could open up a variety of novel high-precision applications. This study presents the results of oxygen-assisted laser cutting of EN43 mild steel sheets, using a high-power fibre laser. Striation-free laser cuts are demonstrated for cutting 1 and 2 mm thick mild steel sheets. The optimal operating windows are presented and a mathematical method is proposed to estimate the critical speed at which striation-free cut can be obtaine000.

  15. Protein evolution via amino acid and codon elimination

    DEFF Research Database (Denmark)

    Goltermann, Lise; Larsen, Marie Sofie Yoo; Banerjee, Rajat

    2010-01-01

    BACKGROUND: Global residue-specific amino acid mutagenesis can provide important biological insight and generate proteins with altered properties, but at the risk of protein misfolding. Further, targeted libraries are usually restricted to a handful of amino acids because there is an exponential...... correlation between the number of residues randomized and the size of the resulting ensemble. Using GFP as the model protein, we present a strategy, termed protein evolution via amino acid and codon elimination, through which simplified, native-like polypeptides encoded by a reduced genetic code were obtained...... simultaneously), while retaining varying levels of activity. Combination of these substitutions to generate a Phe-free variant of GFP abolished fluorescence. Combinatorial re-introduction of five Phe residues, based on the activities of the respective single amino acid replacements, was sufficient to restore GFP...

  16. Diagnosing Allergic Contact Dermatitis Through Elimination, Perception, Detection and Deduction.

    Science.gov (United States)

    Pongpairoj, Korbkarn; Puangpet, Pailin; Thaiwat, Supitchaya; McFadden, John P

    2017-10-01

    Several authors have commented upon the skills of detection required in making a diagnosis of allergic contact dermatitis. Here, we emphasise the search for clues in a systematic manner. We describe four stages as part of a systematic method for diagnosing allergic contact dermatitis. Firstly, elimination (or inclusion) of non-allergic diagnoses. Secondly, perception: the pre-patch test diagnosis and the 'three scenarios' principle. Thirdly, detection: optimising the sensitivity of the patch test process. Fourthly, deduction: diagnosing allergic contact dermatitis by associating the dermatitis with the allergen exposure. We further compare and contrast the pre-patch test history and examination with the markedly different one ('microhistory' and 'microexamination') used after patch testing. The importance of knowledge of contact dermatitis literature is emphasised with a review of recent publications. Finally, we also highlight the use of contact allergy profiling as an investigative tool in the diagnosis of allergic contact dermatitis.

  17. Anatomy and physiology of urinary elimination. Part 1.

    Science.gov (United States)

    Pellatt, Glynis Collis

    Elimination of urine is an essential bodily function, but independence in this activity may be affected by physical and mental disability. Part 1 of this article discusses the anatomy and physiology of the renal and urinary tract and the production of urine. Urinalysis is a vital nursing assessment and the collection of specimens and the range of tests undertaken are outlined. Assisting patients to use the toilet, commode or bedpan is an essential nursing skill. The importance of sensitivity, empathy and moving and handling risk assessment is discussed, and the assessment and management of urinary tract infection and urinary tract stones are addressed. The importance of prevention of cross infection for nurses and patients is highlighted throughout the article.

  18. A change in humidification system can eliminate endotracheal tube occlusion.

    Science.gov (United States)

    Doyle, Alex; Joshi, Manasi; Frank, Peter; Craven, Thomas; Moondi, Parvez; Young, Peter

    2011-12-01

    Inadequate airway humidification can result in endotracheal tube occlusion. There is evidence that heat and moisture exchangers (HMEs) are more prone to endotracheal tube occlusion than heated humidifiers (HHs) that contain a heated wire circuit. We aimed to compare the incidence of endotracheal tube occlusion while introducing a new dual-heated wire circuit HH in place of an established hydrophobic HME. This was a prospective observational study. All patients who required intubation were included in our analysis. Univariate statistical analysis was performed using a Fisher exact test. P humidification exclusively by HH. In the subsequent 18-month period, there were no further episodes of endotracheal tube occlusion. Our study demonstrates that there is a significant increase in the incidence of endotracheal tube occlusion when using a hydrophobic HME compared with an HH and that using a dual-heated wire circuit HH can eliminate endotracheal tube occlusion. Copyright © 2011 Elsevier Inc. All rights reserved.

  19. Method for eliminating gas blocking in electrokinetic pumping systems

    Science.gov (United States)

    Arnold, Don W.; Paul, Phillip H.; Schoeniger, Joseph S.

    2001-09-11

    A method for eliminating gas bubble blockage of current flow during operation of an electrokinetic pump. By making use of the ability to modify the surface charge on the porous dielectric medium used in electrokinetic pumps, it becomes possible to place electrodes away from the pressurized region of the electrokinetic pump. While gas is still generated at the electrodes they are situated such that the generated gas can escape into a larger buffer reservoir and not into the high pressure region of the pump where the gas bubbles can interrupt current flow. Various combinations of porous dielectric materials and ionic conductors can be used to create pumps that have desirable electrical, material handling, and flow attributes.

  20. [A battle won: the elimination of poliomyelitis in Cuba].

    Science.gov (United States)

    Chaple, Enrique Beldarraín

    2015-01-01

    Poliomyelitis was introduced in Cuba in the late nineteenth century by American residents in Isla de Pinos. The first epidemics occurred in 1906 and 1909 and increased in intensity between 1930 and 1958. The scope of the paper is to reconstruct the history of the disease and its epidemics in Cuba prior to 1961, the first National Polio Vaccination Campaign (1962) and its results, as well as analyze the ongoing annual vaccination campaigns through to certified elimination of the disease (1994). The logical historical method was used and archival documents and statistics from the Ministry of Health on morbidity and mortality through 2000 were reviewed. Gross morbidity and mortality rates were calculated and interviews with key figures were conducted.

  1. Technique to eliminate helium induced weld cracking in stainless steels

    International Nuclear Information System (INIS)

    Chin-An Wang; Chin, B.A.

    1992-01-01

    Experiments have shown that Type 316 stainless steel is susceptible to heat-affected-zone (HAZ) cracking upon cooling when welded using the gas tungsten arc (GTA) process under lateral constraint. The cracking has been hypothesized to be caused by stress-assisted helium bubble growth and rupture at grain boundaries. This study utilized an experimental welding setup which enabled different compressive stresses to be applied to the plates during welding. Autogenous GTA welds were produced in Type 316 stainless steel doped with 256 appm helium. The application of a compressive stress, 55 Mpa, during welding suppressed the previously observed catastrophic cracking. Detailed examinations conducted after welding showed a dramatic change in helium bubble morphology. Grain boundary bubble growth along directions parallel to the weld was suppressed. Results suggest that stress-modified welding techniques may be used to suppress or eliminate helium-induced cracking during joining of irradiated materials

  2. Nuclear static eliminators halt airborne contamination and enhance personnel safety

    International Nuclear Information System (INIS)

    Edelmann, G.F.; Regan, J.T.

    1985-01-01

    In January 1984, Nelco Products, Inc. opened a new plant in Fullerton, CA to produce fiberglass/epoxy sheet stock which is used to manufacture single-sided, double-sided and multi-layer printed circuit boards (PCB) for electronic and telecommunications apparatus. The process for making the PCB core material begins with woven fiberglass fabric which passes through a series of metal take-up and tensioning rollers, and is then immersed in and impregnated with an equivalent weight of epoxy resin. Shortly after startup, the plant encountered quality control and safety problems due to electrostatic charges that commonly occur when processing non-conductors such as fiberglass plastics and paper given serious consideration until the plant had been operating for about six months and continued to have quality and safety problems due to static charges. The engineers decided to try a bar-type nuclear static eliminator containing polonium 210 (Po-210) whose emissions create both negative and positive air ions. The nuclear-powered device is available only on an annual renewable lease, because the normal useful life is one year, and the US Nuclear Regulatory Commission requires a leak test each 12 months. A fresh bar is shipped to the lessee at the end of the 12-month period, and the old one is returned to the lessor. The nuclear-powered static eliminators have improved the quality of the PCB core material since the fiberglass cloth is practically free of any dirt or dust before it enters the resin-impregnating bath. Furthermore, the operators no longer complain about electrical shocks

  3. Chasing zero: the drive to eliminate surgical site infections.

    Science.gov (United States)

    Thompson, Kristine M; Oldenburg, W Andrew; Deschamps, Claude; Rupp, William C; Smith, C Daniel

    2011-09-01

    It is estimated that healthcare associated infections (HAI) account for 1.7 million infections and 99,000 associated deaths each year, with annual direct medical costs of up to $45 billion. Surgical Site Infections (SSI) account for 17% of HAIs, an estimated annual cost of $3.5 to 10 billion for our country alone. This project was designed to pursue elimination of SSIs and document results. Starting in 2009 a program to eliminate SSIs was undertaken at a nationally recognized academic health center. Interventions already outlined by CMS and IHI were utilized, along with additional interventions based on literature showing relationships with SSI reduction and best practices. Rapid deployment of multiple interventions (SSI Bundle) was undertaken. Tactics included standardized order sets, a centralized preoperative evaluation (POE) clinic, high compliance with intraoperative interventions, and widespread monthly reporting of compliance and results. Data from 2008 to 2010 were collected and analyzed. Between May 1, 2008 and June 30, 2010, all patients with Class I and Class II wounds were tracked for SSIs. Baseline data (May-June 2008) was obtained showing a Class I surgical site infection rate of 1.78%, Class II of 2.82% (total surgical volume: 4160 cases). As of the second quarter 2010, those rates have dropped to 0.51% and 1.44%, respectively (P cost savings of nearly $1 million during the study period. Committed leadership, aggressive assurance of high compliance with multiple known interventions (SSI Bundle), transparency to achieve high levels of staff engagement, and centralization of critical surgical activities result in significant declines in SSIs with resulting substantial cost savings.

  4. Elimination of User-Fees in Tertiary Education: A Distributive Analysis for Ecuador

    Science.gov (United States)

    Ponce, Juan; Loayza, Yessenia

    2012-01-01

    This paper offers new evidence and methods for understanding the distributive effect of a universal government policy to eliminate user fees in public universities in Ecuador. The main argument to eliminate user fees in higher education is that it will increase enrollment among the poor. In this regard, eliminating tuition fees is supposed to be a…

  5. 76 FR 67459 - Advisory Council for the Elimination of Tuberculosis (ACET)

    Science.gov (United States)

    2011-11-01

    ... Council for the Elimination of Tuberculosis (ACET) In accordance with section 10(a)(2) of the Federal... Director, CDC, regarding the elimination of tuberculosis. Specifically, the Council makes recommendations... technologies; and reviews the extent to which progress has been made toward eliminating tuberculosis. Matters...

  6. 75 FR 6402 - Advisory Council for the Elimination of Tuberculosis (ACET)

    Science.gov (United States)

    2010-02-09

    ... Council for the Elimination of Tuberculosis (ACET) In accordance with section 10(a)(2) of the Federal... for Health, and the Director, CDC, regarding the elimination of tuberculosis. Specifically, the... eliminating tuberculosis. Matters To Be Discussed: Agenda items include issues pertaining to regionalization...

  7. 75 FR 63496 - Advisory Council for the Elimination of Tuberculosis (ACET)

    Science.gov (United States)

    2010-10-15

    ... Council for the Elimination of Tuberculosis (ACET) In accordance with section 10(a)(2) of the Federal... Director, CDC, regarding the elimination of tuberculosis. Specifically, the Council makes recommendations... technologies; and reviews the extent to which progress has been made toward eliminating tuberculosis. Matters...

  8. 77 FR 8877 - Advisory Council for the Elimination of Tuberculosis (ACET)

    Science.gov (United States)

    2012-02-15

    ... Council for the Elimination of Tuberculosis (ACET) In accordance with section 10(a)(2) of the Federal... for Health, and the Director, CDC, regarding the elimination of tuberculosis. Specifically, the... eliminating tuberculosis. Matters to be Discussed: Agenda items include the following topics: (1) Tuberculosis...

  9. Study, analysis and design of plasma torch for the elimination of hospital wastes in Chile

    International Nuclear Information System (INIS)

    Diaz Ramirez, Ximena Jesus

    2014-01-01

    Within the field of new technologies in industry, the use of plasma is notable for its high speed of expansion and development. Currently one of its uses is the elimination of waste as it allows to avoid problems such as the formation of airborne byproducts and hazardous solids that represent a serious problem for the environment and human health. Plasma, when it is at extreme temperatures above 3,000 Celsius, causes inorganic waste to disintegrate and to vitrify on a solid residue while organic waste is converted into gases. Unlike any other thermal treatment of waste (incineration, gasification, pyrolysis, etc.) and because it is not a combustion process, but atomization of matter, no pollutant emissions into the atmosphere (dioxins and similar) or ash, there are only simple gases and an inert solid completely vitrified that can be used in the construction, for the obtaining of urban furniture, as decorative element, for example. The project proposes to develop an experimental device, laboratory plasma torch, to investigate its application in the reduction of hospital waste. It is expected to model, design and construct an experimental device that produces a plasma jet, whose temperature is adequate to perform hospital waste treatments at the laboratory level. The main objective of the project is to contribute to the generation of knowledge in the field of hospital waste reduction through the use of technological applications of plasmas, generating the necessary research for the study of art and technological development at the experimental level in the indicated field

  10. Elimination of Drifts in Long-Duration Monitoring for Apnea-Hypopnea of Human Respiration

    Directory of Open Access Journals (Sweden)

    Peng Jiang

    2016-10-01

    Full Text Available This paper reports a methodology to eliminate an uncertain baseline drift in respiratory monitoring using a thermal airflow sensor exposed in a high humidity environment. Human respiratory airflow usually contains a large amount of moisture (relative humidity, RH > 85%. Water vapors in breathing air condense gradually on the surface of the sensor so as to form a thin water film that leads to a significant sensor drift in long-duration respiratory monitoring. The water film is formed by a combination of condensation and evaporation, and therefore the behavior of the humidity drift is complicated. Fortunately, the exhale and inhale responses of the sensor exhibit distinguishing features that are different from the humidity drift. Using a wavelet analysis method, we removed the baseline drift of the sensor and successfully recovered the respiratory waveform. Finally, we extracted apnea-hypopnea events from the respiratory signals monitored in whole-night sleeps of patients and compared them with golden standard polysomnography (PSG results.

  11. Thermal diffusivity effect in opto-thermal skin measurements

    International Nuclear Information System (INIS)

    Xiao, P; Imhof, R E; Cui, Y; Ciortea, L I; Berg, E P

    2010-01-01

    We present our latest study on the thermal diffusivity effect in opto-thermal skin measurements. We discuss how thermal diffusivity affects the shape of opto-thermal signal, and how to measure thermal diffusivity in opto-thermal measurements of arbitrary sample surfaces. We also present a mathematical model for a thermally gradient material, and its corresponding opto-thermal signal. Finally, we show some of our latest experimental results of this thermal diffusivity effect study.

  12. Improved approach for determining thin layer thermal conductivity using the 3 ω method. Application to porous Si thermal conductivity in the temperature range 77–300 K

    International Nuclear Information System (INIS)

    Valalaki, K; Nassiopoulou, A G

    2017-01-01

    An improved approach for determining thermal conductivity using the 3 ω method was used to determine anisotropic porous Si thermal conductivity in the temperature range 77–300 K. In this approach, thermal conductivity is extracted from experimental data of the third harmonic of the voltage (3 ω ) as a function of frequency, combined with consequent FEM simulations. The advantage is that within this approach the finite thickness of the sample and the heater are taken into account so that the corresponding errors introduced in thermal conductivity values when using Cahill’s simplified analytical formula are eliminated. The developed method constitutes a useful tool for measuring the thermal conductivity of samples with unknown thermal properties. The thermal conductivity measurements with the 3 ω method are discussed and compared with those obtained using the well-established dc method. (paper)

  13. Demonstration of Passive Fuel Cell Thermal Management Technology

    Science.gov (United States)

    Burke, Kenneth A.; Jakupca, Ian; Colozza, Anthony; Wynne, Robert; Miller, Michael; Meyer, Al; Smith, William

    2012-01-01

    The NASA Glenn Research Center is developing advanced passive thermal management technology to reduce the mass and improve the reliability of space fuel cell systems for the NASA Exploration program. The passive thermal management system relies on heat conduction within highly thermally conductive cooling plates to move the heat from the central portion of the cell stack out to the edges of the fuel cell stack. Using the passive approach eliminates the need for a coolant pump and other cooling loop components within the fuel cell system which reduces mass and improves overall system reliability. Previous development demonstrated the performance of suitable highly thermally conductive cooling plates and integrated heat exchanger technology to collect the heat from the cooling plates (Ref. 1). The next step in the development of this passive thermal approach was the demonstration of the control of the heat removal process and the demonstration of the passive thermal control technology in actual fuel cell stacks. Tests were run with a simulated fuel cell stack passive thermal management system outfitted with passive cooling plates, an integrated heat exchanger and two types of cooling flow control valves. The tests were run to demonstrate the controllability of the passive thermal control approach. Finally, successful demonstrations of passive thermal control technology were conducted with fuel cell stacks from two fuel cell stack vendors.

  14. A four-probe thermal transport measurement method for nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jaehyun; Ou, Eric; Sellan, Daniel P.; Shi, Li, E-mail: lishi@mail.utexas.edu [Department of Mechanical Engineering, The University of Texas at Austin, Austin, Texas 78712 (United States)

    2015-04-15

    Several experimental techniques reported in recent years have enabled the measurement of thermal transport properties of nanostructures. However, eliminating the contact thermal resistance error from the measurement results has remained a critical challenge. Here, we report a different four-probe measurement method that can separately obtain both the intrinsic thermal conductance and the contact thermal resistance of individual nanostructures. The measurement device consists of four microfabricated, suspended metal lines that act as resistive heaters and thermometers, across which the nanostructure sample is assembled. The method takes advantage of the variation in the heat flow along the suspended nanostructure and across its contacts to the four suspended heater and thermometer lines, and uses sixteen sets of temperature and heat flow measurements to obtain nine of the thermal resistances in the measurement device and the nanostructure sample, including the intrinsic thermal resistance and the two contact thermal resistances to the middle suspended segment of the nanostructure. Two single crystalline Si nanowires with different cross sections are measured in this work to demonstrate the effectiveness of the method. This four-probe thermal transport measurement method can lead to future discoveries of unique size-dependent thermal transport phenomena in nanostructures and low-dimensional materials, in addition to providing reliable experimental data for calibrating theoretical models.

  15. A four-probe thermal transport measurement method for nanostructures

    International Nuclear Information System (INIS)

    Kim, Jaehyun; Ou, Eric; Sellan, Daniel P.; Shi, Li

    2015-01-01

    Several experimental techniques reported in recent years have enabled the measurement of thermal transport properties of nanostructures. However, eliminating the contact thermal resistance error from the measurement results has remained a critical challenge. Here, we report a different four-probe measurement method that can separately obtain both the intrinsic thermal conductance and the contact thermal resistance of individual nanostructures. The measurement device consists of four microfabricated, suspended metal lines that act as resistive heaters and thermometers, across which the nanostructure sample is assembled. The method takes advantage of the variation in the heat flow along the suspended nanostructure and across its contacts to the four suspended heater and thermometer lines, and uses sixteen sets of temperature and heat flow measurements to obtain nine of the thermal resistances in the measurement device and the nanostructure sample, including the intrinsic thermal resistance and the two contact thermal resistances to the middle suspended segment of the nanostructure. Two single crystalline Si nanowires with different cross sections are measured in this work to demonstrate the effectiveness of the method. This four-probe thermal transport measurement method can lead to future discoveries of unique size-dependent thermal transport phenomena in nanostructures and low-dimensional materials, in addition to providing reliable experimental data for calibrating theoretical models

  16. For a convention for nuclear weapon elimination; Pour une convention d'elimination des armes nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-03-15

    This document contains two texts linked with the project of an international convention for the elimination of nuclear weapons (the text of this project has been sent to the UN General Secretary and is part of an international campaign to abolish nuclear weapons, ICAN). These two texts are contributions presented in London at the Global Summit for a Nuclear Weapon-free World. The first one calls into question the deterrence principle and the idea of a nuclear weapon-based security. It calls for different forms of action to promote a nuclear weapon-free world. The second text stresses the role and the responsibility of states with nuclear weapons in nuclear disarmament and in the reinforcement of the nuclear non proliferation treaty (NPT)

  17. Thermal expansion properties of calcium aluminate hydrates

    International Nuclear Information System (INIS)

    Song, Tae Woong

    1986-01-01

    In order to eliminate the effect of impurities and aggregates on the thermomechanical properties of the various calcium aluminate hydrates, and to prepare clinkers in which all calcium aluminates are mixed homogeneously, chemically pure CaO and Al 2 O 3 were weighed, blended and heated in various conditions. After quantitative X-ray diffractometry(QXRD), the synthesized clinker was hydrated and cured under the conditions of 30 deg C, W/C=0.5, relative humidity> 90% respectively during 24 hours. And then differential thermal analysis(DTA), thermogravimetry(TG), micro calorimetry, thermomechanical analysis(TMA) and scanning electron microanalysis(SEM) were applied to examine the thermal properties of samples containing, calcium aluminate hydrates in various quantity. (Author)

  18. Development of methodology to assess application of practical elimination for nuclear power plants

    International Nuclear Information System (INIS)

    Jung, J.; Sivekumar, D.; Thambirasa, S.

    2015-01-01

    The Fukushima Daiichi nuclear accident is presented as the primary case study for the topic of practical elimination. A decision matrix was created to assess whether practical elimination has been achieved or not. Public acceptance is included as a factor in practical elimination. An evaluation of an underground High-Temperature Gas Cooled Reactor was performed, where it was determined that a greater than 10 earthquake on the Richter scale is practically eliminated, but can easily be overturned based on public acceptance. A plane crash scenario was also practically eliminated. The gap analysis performed concluded that the developed decision matrix requires reworking. (author)

  19. The thermal Virasoro formula

    International Nuclear Information System (INIS)

    Fujisaki, Haruo

    1991-01-01

    The thermal stability of non-planar duality is described at any finite temperature through the new-fashioned four-tachyon tree amplitude of closed bosonic thermal strings within the dispersion theoretic approach based upon the thermofield dynamics. (author)

  20. Thermal conductivity of technetium

    International Nuclear Information System (INIS)

    Minato, K.; Serizawa, H.; Fukuda, K.

    1998-01-01

    The thermal diffusivity of technetium was measured on a disk sample of 5 mm in diameter and 1 mm in thickness by the laser flash method from room temperature to 1173 K, and the thermal conductivity was determined by the measured thermal diffusivity and density, and the reported specific heat capacity. The thermal diffusivity of technetium decreases with increasing temperature though it is almost constant above 600 K. The thermal conductivity of technetium shows a minimum around 400 K, above which the thermal conductivity increases with temperature. The electronic and phonon components of the thermal conductivity were evaluated approximately. The increase in the thermal conductivity of technetium with temperature is due to the increase in the electronic component. (orig.)