WorldWideScience

Sample records for eletrolito solido polimerico

  1. Ameloblastoma solido/multiquistico

    OpenAIRE

    Alemán Navas, Ramos Manuel; Martínez Mendoza, María Guadalupe

    2008-01-01

    El ameloblastoma es una neoplasia benigna, agresiva, de crecimiento lento que puede ser más destructivo y amenazador para la vida que algunos de los tumores malignos de la región oral y maxilofacial específicamente hablando del ameloblastoma solido/multiquistico o del ameloblastoma unquístico mural. El ameloblastoma es el tumor odontogénico benigno más frecuente en muchos países del mundo

  2. Synthesis, characterization and electrical properties of solid electrolyte for solid oxide fuel cell; Preparacao, caracterizacao e propriedades eletricas de eletrolito solido para celula a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Berton, Marco Antonio Coelho; Garcia, Carlos Mario; Matos, Jeferson Hrenechen [Instituto de Tecnologia para o Desenvolvimento (LACTEC), Curitiba, PR (Brazil)], Emails: felsky@latec.org.br, garcia@latec.org.br, jeferson.h@latec.org.br

    2010-04-15

    Solid electrolytes of BaCe{sub 08}Gd{sub O29} were prepared by the polymeric precursor method. X-ray diffraction data shows a single phase with orthorhombic crystalline structure. The densification process was followed by scanning electronic microscopy and apparent density measurements. The apparent density was developed for different temperatures of sintering, reaching > 96% for sintered temperature of 1550 {sup 0}C deg . The electrochemical impedance analysis was development in the temperature of 400-700 deg C, in air atmosphere at 700 deg C a value of 30,6 mS.cm{sup -1} was obtained. The results of conductivity have confirmed the gadolinium doped barium cerate has a great potential for use as solid electrolyte for intermediate temperature solid oxide fuel cell, at experimental controlled conditions. (author)

  3. Development of perovskite cathodes for solid oxide fuel cells (SOFC); Desenvolvimento de catodos de perovskitas para celula a combustivel solido de eletrolito solido (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J. [UNESP, Araraquara, SP (Brazil). Inst. de Quimica], e-mail: joelma@iq.unesp.br; Pereira, J.T.; Saeki, M.J. [UNESP, Bauru, SP (Brazil). Faculdade de Ciencias

    2006-07-01

    Solid Oxide Fuel Cells (SOFC) are energy conversion systems of great interest for industrial applications because they present a high efficiency for energy generation and several advantages for the environment. In this work, perovskite type oxides La{sub 085}Sr{sub 0,15}MnO{sub 3}, La{sub 0,7} Sr{sub 0,3}MnO{sub 3}, La{sub 0,6}Sr{sub 0,4}MnO{sub 3}, La{sub 0,85}Sr{sub 0,15}CoO{sub 3}, La{sub 0,7}Sr{sub 0,3}CoO{sub 3}, La{sub 0,6}Sr{sub 0,4}CoO{sub 3}, La{sub 0.6}Sr{sub 0,4}Fe{sub 0,8}Co{sub 0,2}O{sub 3} e La{sub 0.6}Sr{sub 0,4}Fe{sub 0,4}Co{sub 0,6}O{sub 3} were prepared by a polymeric method with the purpose of using them as cathodes in SOFCs. The electrochemical cell was mounted utilizing YSZ (ZrO{sub 2} - 8 mol%Y{sub 2}O{sub 3}) disks as electrolyte, where a paste containing Pt was calcined onto one face while the other one was covered with the oxide materials synthesized ('screen printing'). The oxide materials prepared were characterized by X-ray diffraction, transmission electronic microscopy and thermogravimetry. The oxygen reduction reaction was studied by taking polarization curves in oxygen and/or air (800 deg C a 950 deg C). The best performance was obtained for 15 {mu}m thickness electrodes La{sub 0.6}Sr{sub 0,4}MnO{sub 3} and La{sub 0.6}Sr{sub 0,4}MnO{sub 3} with addition of dispersed Pt. (author)

  4. Membranes of polyindene sulfonated and PVA for use as polymer electrolyte; Membranas mistas de poli(indeno) sulfonado e PVA para uso como eletrolito polimerico

    Energy Technology Data Exchange (ETDEWEB)

    Loser, N.; Silva, B.B.R. da; Brum, F.J.B.; Forte, M.M.C. [Universidade Federal do Rio Grande do Sul - Escola de Engenharia, Porto Alegre, RS (Brazil)

    2010-07-01

    This study is focused on developing polymer poly electrolytes for fuel cell PEM and aims to evaluate the efficiency of sulfonated polyindene as A polymer electrolyte in blends with poly (vinyl alcohol) (PVA). For this, polyindene synthesized in the lab was functionalized with sulfonic groups (-SO{sub 3}H), using as sulfonation agent acetyl sulfate in 1,2-dichloroethane. The membranes of sulfonated polyindene (SPInd) and PVA were prepared in aqueous medium, using glutaraldehyde as a PVA cross linker. The membranes SPInd/PVA were evaluated on the content of sulfonic groups, ion exchange capacity (IEC), degree of swelling in water and thermal stability (TGA). Electrochemical impedance analysis was used for ionic conductivity evaluation and DMA for the mechanical strength of the membranes. Preliminary results show that the membranes showed ion exchange capacity about 3.2 m equiv/g and degree of swelling in water of 550%. (author)

  5. Bilayer electrolyte-anode for solid oxide fuel cell; Obtencao de bicamadas eletrolito-anodo para pilhas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Crochemore, G.B.; Marcomini, R.F.; Souza, D.P.F. de [Universidade Federal de Sao Carlos (GEMM/UFSCAR), Sao Carlos, SP (Brazil). Programa de Pos Graduacao em Ciencia e Engenharia de Materiais], Email: dulcina@ufscar.br; Rabelo, A.A. [Universidade Federal do Para (UFPA), Belem, PA (Brazil). Fac. de Engenharia de Materiais

    2010-07-01

    Solid oxide fuel cell is a high efficient device hence it plays a very important role in the hydrogen economy. However, the cell operation temperature must be lower than 800 deg C, what is attainable for thin Yttria stabilized zirconia (YSZ) electrolytes. The tape casting process is the most used technique because it allows a very fine tuning of the tape thickness. In this work it were investigated the processing conditions for obtaining electrolyte-anode (YSZ/ YSZ-NiO) bilayers with no lamination after the sintering process. (author)

  6. Study on the performance of Nafion 212 membrane in polymeric electrolyte fuel cells operating with air; Estudo do desempenho da membrana de Nafion 212 em celulas a combustivel de eletrolito polimerico operando com ar

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Adriano C.; Ticianelli, Edson Antonio [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Quimica]. E-mail: edsont@iqsc.usp.br

    2008-07-01

    The operational characteristics of the Nafion 212 membrane (N212) were investigated and compared to the Nafion 112 membrane (N112), both 50 thick, in polymer electrolyte fuel cell (PEFC). The polarization measurements were performed changing the cell and gases humidification temperature and the gases pressure. The kinetic parameters obtained from the polarization curve proved that the cell with membrane N212 showed better performance than membrane N112, when they operating with air at cathode. The electrochemical impedance studies were carried out to make clear the polarization phenomena due to the resistive and diffusive effects that limit the cell performance. At high frequency region is found an arc, which dimension in depends on the current density, whereas at the mid frequency region we can find two loops with different characteristics and both dependent of current density. This behavior becomes evident that there are polarization components linked to resistive processes at high frequency, as well as charge transference and diffusional at mid and low frequency, respectively. (author)

  7. O Sistema de Gerenciamento dos Residuos Solidos Urbanos Domiciliares em Aquidauana, MS

    OpenAIRE

    Silva, Maria do Socorro Ferreira da

    2005-01-01

    O trabalho aborda a importancia de programas de coleta seletiva no gerenciamento integrado dos residuos solidos domiciliares produzidos na cidade de Aquidauana, MS. Este trabalho enfatiza também a relevancia para o planejamento do serviço de coleta regular tais como: produção total e per capita, composição fisica, e produção por classe salarial nos setores da cidade. Os objetivos deste trabalho são: analisar a produção de residuos solidos domiciliares na cidade de Aquidauana e averiguar a via...

  8. Co-sintering of CGO/NIO-CGO bilayers for solid oxide fuel cell; Co-sinterizacao de bi-camadas anodo/eletrolito para celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Neto, P.P.B.; Grilo, J.P.F.; Souza, G.L.; Macedo, D.A.; Paskocimas, C.A.; Nascimento, R.M., E-mail: pbritoneto@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2012-07-01

    Reducing the operating temperature of solid oxide fuel cells (SOFC) for the range between 500 and 700°C is one of the challenges which more has aroused the interest of research in SOFC in recent years. In this context, the bilayer anode/electrolyte composed of a porous support based on Ni-doped ceria (anode) and a ceria doped gadolinia (CGO) electrolyte, presents itself as one of the half-cell configurations of the most interest towards the production of electricity in the operating logic of a SOFC. In this work, CGO films were successfully prepared on NiO-CGO substrates using the resources of the screen-printing technique. The bi-layers were co-sintered between 1350 and 1450 ° C for 4 h and then characterized by scanning electron microscopy and energy dispersive X-ray spectroscopy (EDS). The results showed good adhesion at the film/substrate interface and no cracks in the films. (author)

  9. Materiais a base de oxidos com estrutura do tipo perovskite e compositos como anodos de PCES: Propriedades Funcionais e Comportamento Eletroquimico em Celulas com Eletrolitos Solidos a Base de Galatos e Silicatos

    Science.gov (United States)

    Kolotygin, Vladislav

    This work was focused on the analysis of transport, thermomechanical and electrochemical properties of a series of perovskite-like oxide materials and composites for potential applications as anodes of intermediate-temperature solid oxide fuel cells (SOFCs) with lanthanum gallate and silicate solid electrolytes. The primary attention was centered on A(Mn,Nb)O3-delta (A = Sr, Ca) and (La,Sr)(Mn,Ti)O3-based systems, lanthanum chromite substituted with acceptor-type and variable-valence cations, and various Ni-containing cermets. Emphasis was given to phase stability of the materials, their crystal structure, microstructure of porous electrode layers and dense ceramics, electronic conductivity, Seebeck coefficient, oxygen permeability, thermal and chemical induced expansion, and anodic overpotentials of the electrodes deposited onto (La,Sr)(Ga,Mg)O3- and La10(Si,Al)6O27-based electrolyte membranes. In selected cases, roles of oxygen diffusivity, states of the transition metal cations relevant for the electronic transport, catalytically active additives and doped ceria protective interlayers introduced in the model electrochemical cells were assessed. The correlations between transport properties of the electrode materials and electrochemical behavior of porous electrodes showed that the principal factors governing anode performance include, in particular, electronic conduction of the anode compositions and cation interdiffusion between the electrodes and solid electrolytes. The latter is critically important for the silicatebased electrolyte membranes, leading to substantially worse anode properties compared to the electrochemical cells with lanthanum gallate solid electrolyte. The results made it possible to select several anode compositions exhibiting lower area-specific electrode resistivity compared to known analogues, such as (La,Sr)(Cr,Mn)O3-delta.

  10. Production of membrane-electrode assemblies to be used in high temperature solid oxide fuel cells; Producao de conjugados eletrolito-eletrodos para pilhas a combustivel de oxido solido de alta temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Villalobos, Pedro R.; Silva, Gilmar Clemente; Miranda, Paulo Emilio V. de [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Metalurgica e de Materiais. Lab. de Hidrogenio], e-mail: vlobos@labh2.coppe.ufrj.br

    2004-07-01

    This article describes the production and characterization of membrane-electrode assemblies to be used in high temperature solid oxide fuel cells. The single cells produced were characterized using scanning electron microscopy and X ray diffractometry, seeking the morphological characterization of the complete device and to verify the stability of the materials used with respect to the processing conditions. (author)

  11. Synthesis and ceramic processing of zirconia alumina composites for application as solid oxide fuel cell electrolytes; Sintese e processamento de compositos de zirconia-alumina para aplicacao como eletrolito em celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Rafael Henrique Lazzari

    2007-07-01

    The global warmness and the necessity to obtain clean energy from alternative methods than petroleum raises the importance of developing cleaner and more efficient systems of energy generation, among then, the solid oxide fuel cell (SOFC). Cubic stabilized zirconia (CSZ) has been the most studied material as electrolyte in SOFC, due to its ionic conductivity and great stability at operation conditions. However, its low fracture toughness difficulties its application as a thin layer, what could lead to an improvement of cell efficiency. In this sense, the alumina addition in CSZ forms a composite, which can shift its mechanical properties, without compromising its electrical properties. In this work, coprecipitation synthesis route and ceramic processing of zirconia-alumina composites were studied, in order to establish optimum conditions to attain high density, homogeneous microstructure, and better mechanical properties than CSZ, without compromising ionic conductivity. For this purpose, composites containing up to 40 wt % of alumina, in a 9 mol % yttria-stabilized zirconia (9Y-CSZ) matrix were evaluated. In order to optimize the synthesis of the composites, a preliminary study of powder obtaining and processing were carried out, at compositions containing 20 wt % of alumina, in 9Y-CSZ. The ceramic powders were characterized by helium picnometry, X-ray diffraction, scanning electronic microscopy, transmission electronic microscopy, thermogravimetry, differential scanning calorimetry, granulometry by laser diffraction and gas adsorption (BET). The characterization of sinterized compacts were performed by X-ray diffraction, scanning electron microscopy, optical microscopy, density measurements, Vickers indentation and impedance spectroscopy. The obtained results show that the alumina addition, in the 9Y-CSZ matrix powders, raises the specific surface area, promotes deagglomeration of powders and elevates the oxides crystallization temperature, requiring higher energetic thermal treatments to attain high densities. In relation to the sintered products, it was confirmed the excellent homogeneity and crystallinity of microstructure provided by the chosen route, the restriction of grain growth by alumina addition, raise of hardness and fracture toughness, and higher ionic conductivity, even tough a lower bulk conductivity. These results indicate that the addition of 5 wt % alumina in CSZ matrix allows the application of this material as solid oxide fuel cell electrolytes, due to its better fracture toughness and ionic conductivity, compared to yttria-stabilized cubic zirconia ceramics. (author)

  12. Manejo de residuos solidos en un evento turistico: Fiesta Nacional de la Uva (RS - Brasil)

    OpenAIRE

    Pereira, Gisele Silva; Conto, Suzana Maria de

    2008-01-01

    este artículo plantea al manejo de residuos solidos como objecto de estudio en eventos turisticos. El trabajo de campo se realisó con tecnicas de observación directa y entrevistas. Éstas ultimas fueron realizadas al presidente, los dos vice-presidentes y los directores de las 15 comisiones organizadoras de la Fiesta Nacional de la Uva 2006. Los resultados muestram la importancia de desarrollar programas de educaciín ambiental para los colaboradores de la fiesta y de considerar el control de l...

  13. Study and development of membrane electrode assemblies for Proton Exchange Membrane Fuel Cell (PEMFC) with palladium based catalysts; Estudo e desenvolvimento de conjuntos membrana-eletrodos (MEA) para celula a combustivel de eletrolito polimerico condutor de protons (PEMFC) com eletrocatalisadores a base de paladio

    Energy Technology Data Exchange (ETDEWEB)

    Bonifacio, Rafael Nogueira

    2013-07-01

    PEMFC systems are capable of generating electricity with high efficiency and low or no emissions, but durability and cost issues prevent its large commercialization. In this work MEA with palladium based catalysts were developed, Pd/C, Pt/C and alloys PdPt/C catalysts with different ratios between metals and carbon were synthesized and characterized. A study of the ratio between catalyst and Nafion Ionomer for formation of high performance triple-phase reaction was carried out, a mathematical model to implement this adjustment to catalysts with different relations between metal and support taking into account the volumetric aspects of the catalyst layer was developed and then a study of the catalyst layer thickness was performed. X-ray diffraction, Transmission and Scanning Electron Microscopy, X-ray Energy Dispersive, Gas Pycnometry, Mercury Intrusion Porosimetry, Gas adsorption according to the BET and BJH equations, and Thermo Gravimetric Analysis techniques were used for characterization and particle size, specific surface areas and lattice parameters determinations were also carried out. All catalysts were used on MEAs preparation and evaluated in 5 cm{sup 2} single cell from 25 to 100 °C at 1 atm and the best composition was also evaluated at 3 atm. In the study of metals for reactions, to reduce the platinum applied to the electrodes without performance losses, Pd/C and PdPt/C 1:1 were selected for anodes and cathodes, respectively. The developed MEA structure used 0,25 mgPt.cm{sup -2}, showing power densities up to 550 mW.cm{sup -2} and power of 2.2 kW{sub net} per gram of platinum. The estimated costs showed that there was a reduction of up to 64.5 %, compared to the MEA structures previously known. Depending on the temperature and operating pressure, values from US$ 1,475.30 to prepare MEAs for each installed kilowatt were obtained. Taking into account recent studies, it was concluded that the cost of the developed MEA is compatible with PEMFC stationary application. (author)

  14. Synthesis and characterization of Ce{sub 1-x}SmXO{sub 2-(x/2)} as solid electrolyte for application in IT-SOFCs; Sintese e caracterizacao de Ce{sub 1-x}SmXO{sub 2-(x/2)} como eletrolito solido para aplicacao em IT-SOFCs

    Energy Technology Data Exchange (ETDEWEB)

    Nicodemo, J.P.; Martinelli, A.E.; Nascimento, R.M. [Universidade Federal do Rio Grande do Norte (DECM/UFRN), Natal, RN (Brazil). Dept. de Engenharia de Materiais], e-mail: juli_pivotto@yahoo.com.br; Melo, D.M.A. [Universidade Federal do Rio Grande do Norte (DQ/UFRN), Natal, RN (Brazil). Dept. de Quimica; Cela, B. [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Macedo, D.A. [Universidade Federal do Rio Grande do Norte (PPGEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica

    2008-07-01

    Mixed rare earth doped CeO{sub 2} oxide-based have been extensively studied for use in solid electrolytes for fuel cells. Ceramics-based CeO{sub 2} have high ionic conductivity and enable the operation of solid oxide fuel cells (SOFCs) in intermediate temperatures, in the range of 500 to 750 deg C. In this work, was investigated the Sm{sub 2}O{sub 3} doped CeO{sub 2} by Pechini method to obtain Ce{sub 0,9}Sm{sub 0,1}O{sub 1,95}. The resulting powders were characterized by the chemical composition (EDS) and crystallographic (XRD), thermal analysis (TG/ATD and DTG), and particles morphology (SEM). After calcinations of 500 and 700 deg C for 2 hours were obtained nanosized powders with crystalline structure of cubic phase type fluorite fully formed. (author)

  15. Fractal analysis of the electrical discharges' surface paths in polymeric insulation considering different pollution levels; Analisis fractal de las trayectorias de descargas electricas superficiales en aislamiento polimerico considerando diferentes niveles de contaminacion

    Energy Technology Data Exchange (ETDEWEB)

    Palacios Lopez, Arturo

    2002-07-01

    In this thesis tree patterns of superficial breakdown in polymeric insulator of Silicon Rubber are generated. Experimental arrangement rod-rod was used on the basis of norm ASTM D 2303-85. Pollution levels on the basis of norm IEC 507 were also used. The experimental values of Fractal Dimension for each case of pollution were reported. A self similar method called Box Counting for the fractal dimension calculus and for the self affine methods an R/S and Variogram were used. According to the results, it was concluded that the tree patterns of superficial electric breakdown in Silicon Rubber is self similar and its value does not depend on the degree of pollution, that is equivalent to the concentration of salt for liter of water or to the Equivalent Salt Deposition (ESDD), in the surface of an insulator. [Spanish] En el presente trabajo se inducen descargas electricas superficiales en un aislamiento polimerico de Hule Silicon, el arreglo experimental que se utilice es punta-punta con base en la norma ASTM D 2303-85 y los niveles de contaminacion con base en la norma IEC 507. Se reportan los valores experimentales de la Dimension Fractal para cada caso de contaminacion, se utilice el metodo auto similar de conteo de cuadros, para el calculo de la Dimension Fractal y para metodos auto afines se utilice analisis R/S y variograma. Con los resultados obtenidos se concluye que la trayectoria de la descarga electrica superficial en un polimero de Hule Silicon es auto similar y su valor no depende del grado de contaminacion, el cual es equivalente a la concentracion de gramos de sal por litro de agua o a la densidad de sal depositada (DESD), en la superficie de un aislador.

  16. Fisica dello stato solido

    CERN Document Server

    Bassani, Franco

    2000-01-01

    Il volume è un manuale introduttivo allo studio delle proprietà dei materiali cristallini. Mentre gli argomenti trattati sono quelli tipici di un testo di base (diffrazione, bande elettroniche, fononi, proprietà di trasporto, metalli e semiconduttori, proprietà ottiche e magnetiche...), caratteristica peculiare di questa opera che la differenzia da analoghi manuali in lingua italiana e inglese è l'uso intensivo delle proprietà di simmetria dei sistemi in studio ricavate dalla teoria dei gruppi.

  17. Pressure gradient of a two-region solid-liquid flow in horizontal wells; Gradiente de presion de un flujo bifasico solido-liquido de dos regiones en pozos horizontales

    Energy Technology Data Exchange (ETDEWEB)

    Salazar Mendoza, R.; Garcia Gutierrez, A. [Centro Nacional de Investigacion y Desarrollo Tecnologico (CENIDET), Cuernavaca, Morelos (Mexico); Espinosa Paredes, G. [Universidad Autonoma Metropolitana-Iztapalapa, Mexico, D.F. (Mexico)

    2005-12-01

    A theoretical analysis is presented for the problem of cutting transport in a two-region, slurry-flow system in horizontal pipes, with a stationary bed of drill cuttings as a porous medium (w-region) below a two-phase dispersed flow (n-region). Volume averaging was applied to derive a rigorous mathematical model where each variable is precisely defined. The model includes volume-averaged transport equations for both the two-phase dispersed flow and the porous-medium regions, and terms from a macroscopic forces balance. The solution of the two-region model allowed evaluation of the behavior of the pressure gradient as a function of velocity, total volume fraction of cuttings, and the relationship between the height of the stationary bed and pipe diameter. It is based on a backward, finite-difference explicit scheme. The simulated physical system is a pipe diameter. It is based on a backward, finite-difference explicit scheme. The simulated physical system is a pipe of 4.135 m in horizontal length and 0.0508 m in diameter. A one dimensional, mesh-centered grid is used, consisting of 10 nodes. The numerical results were compared with experimental data on slurry flows and a good agreement was found. [Spanish] Se presenta un analisis teorico del problema de transporte de recortes de perforacion en pozos horizontales. Se estudia el flujo bifasico solido-liquido en dos regiones donde la region inferior es un lecho estacionario de recortes, considerado como medio poroso, mientras que la region superior es un flujo bifasico disperso solido-liquido. Se aplica el metodo de promediado en volumen para derivar de manera matematicamente rigurosa el modelo de dos regiones. El modelo incluye las ecuaciones de transporte promediadas en volumen para cada region y terminos que resultan de un balance de fuerzas macroscopico. La solucion del modelo permite evaluar el comportamiento del gradiente de presion como funcion de la velocidad, la fraccion de volumen de recortes total y la

  18. Solid residues; Os residuos solidos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This chapter gives a general overview on the general effects of the solid waste pollution, the principal pollutants emitted by the oil refineries, control actions for the solid waste emissions, the minimization actions, and the effluent treatment.

  19. Antifreeze polymeric additives for fuels; Aditivos polimericos anticongelantes para combustiveis

    Energy Technology Data Exchange (ETDEWEB)

    Muniz, Aline S.; Carvalho, Agne Roani de; Sakae, George Hideki; Oliveira, Angelo R.S.; Cesar-Oliveira, Maria Aparecida F. [Universidade Federal do Parana - UFPR - Departamento de Quimica - LABPOL-Laboratorio de Polimeros Sinteticos, Centro Politecnico, Curitiba, PR (Brazil)], e-mails: mafco@ufpr.br, alinemuniz@ufpr.br

    2011-07-01

    Owing to the current interest in the reduction of environmental pollution, several researchers are seeking renewable sources of energy which can at least partially replace combustibles derived from petroleum. Diesel oil is the combustible that most seriously pollutes the environment and is thus the biodiesel that is being considered as a fuel which can be replaced by a renewable combustible; this can possibly be used in diesel engines without any modifications. However, certain problems have to be overcome with regard to the temperature at which the biodiesel should be stored and used, since there is a tendency for biodiesel to solidify at low temperatures. This suggests that there is a need for the use of anti-freeze additives. This work behind the main focus additives with only 25 ppm, were able to reduce the pour point of fuel, achieving significant results, for example, the additive M14A18 lowered the pour point (PP) of B20 to -20 degree C, showing that the use of increasing amounts of biodiesel to diesel can aggregate. The main focus of work behind the development of additives that with only 25 ppm, were able to reduce the pour point of fuel, producing significant results such as those obtained with the use of additive M14A18 which lowered the pour point of the B20 to -20 degree C, showing the possibility of using increasing amounts of biodiesel added to diesel. (author)

  20. Electrochemical performance in the hydrogen evolution reaction of Ni-TR (TR= La, Ce) materials synthesized using the solid state reaction method; Desempeno electroquimico en la reaccion de evolucion de hidrogeno de materiales de electrodo Ni-TR (TR = La, Ce) sintetizados por el metodo de reaccion de estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Torres-Huerta, A. M.; Dominguez-Crespo, M. A.; Ramirez-Meneses, E.; Yanez-Zamora, C. [CICATA, IPN, Altamira, Tamaulipas (Mexico); Avila-Garcia, I. [IPN, ESIQIE, UPALM, Mexico, D.F. (Mexico)]. E-mail: mdominguezc@ipn.mx; adcrespo2000@yahoo.com.mx

    2009-09-15

    relacionados con su operacion. El material de electrodo con mayor electroactividad es el Pt, pero debido a su costo elevado se han tenido que buscar electrocatalizadores alternativos con un balance entre costo y actividad. Uno de los materiales que mas se ha utilizado es el Niquel en conjunto con algunas de sus aleaciones. Este material ha demostrado un buen desempeno utilizando bajos sobrepotenciales en reacciones tradicionales como las reacciones de evolucion de hidrogeno (REH) y oxigeno (REO), asi como una alta resistencia a la corrosion y bajo costo. Particularmente, aleaciones binarias y ternarias han demostrado un incremento importante en la actividad de la REH al compararla con los materiales en su estado puro o masivo. Por esta razon, en la busqueda de nuevas alternativas con una aceptable eficiencia al compararla con los materiales a bajo costo, en este trabajo se obtuvieron materiales Ni-TR (TR = La, Ce) por el metodo de reaccion de estado solido, a partir de: a) acetilacetonatos metalicos y b) polvos metalicos. Estos materiales se sinterizaron durante 3 h a diferentes temperaturas (795 o 920 , 1000 y 1200 grados centigrados) a fin de evaluar su efecto en el desempeno electroquimico de los electrocatalizadores. La caracterizacion estructural y morfologica de materiales se realizo por las tecnicas de DRX y MEB, respectivamente. Asimismo, el desempeno electroquimico de los materiales de electrodo se evaluo en la REH utilizando voltametria ciclica (VC) y curvas potenciodinamicas. Los resultados obtenidos muestran que a bajas temperaturas se obtiene una mezcla de oxidos (NiO, CeO{sub 2} y LaNiO{sub 3}); sin embargo a medida que la temperatura de sinterizado se incrementa, se alcanza la formacion de las aleaciones NiO-CeO{sub 2} y NiO-LaNiO{sub 3}, respectivamente. Al mismo tiempo se observo una clara dependencia de la actividad electrocatalitica con la fuente obtencion de estos materiales (Ni-TR).

  1. EFECTO DEL CONTENIDO DE SODIO EN LA OBTENCIÓN DE Na+ -B-ALÚMINA UTILIZANDO EL MÉTODO DE PRECURSOR POLIMÉRICO

    Directory of Open Access Journals (Sweden)

    VANESSA RUIZ

    2011-01-01

    Full Text Available En este trabajo se muestran los resultados obtenidos al emplear el metodo de precursor polimerico (Pechini para sintetizar polvos ceramicos de Na + B Àalumina, utilizando sales inorganicas, tomando como parametro de estudio la cantidad inicial del precursor de sodio y su efecto sobre la fase cristalina obtenida al final del proceso. Los polvos fueron caracterizados utilizando espectroscopia Infrarroja (FTIR, Difraccion de Rayos X (DRX y Microscopia Electronica de Barrido (MEB. Se encontro que el efecto de la cantidad de sodio inicial en la muestra es determinante en la naturaleza del producto final obtenido. Utilizando la cantidad estequiometrica de NaOH requerida, para la obtencion del compuesto NaAl11O17, se obtuvo al final del proceso (1450oC a-alumina y B-alumina y/o Na2Al2xO3x1 en muestras tratadas termicamente entre 1000oC y 1350oC. Cuando se uso una mayor cantidad de NaOH, muestra no estequiometrica, se obtuvo un solido con el compuesto NaAl11O17 como fase mayoritaria.

  2. Management of industrial solid residues; Gerenciamento de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This chapter gives an overview on the management of industrial solid wastes, approaching the following subjects: classification of industrial solid residues; directives and methodologies for the management of industrial solid residues; instruments for the management of industrial solid residues; handling, packing, storage and transportation; treatment of industrial solid residues; final disposal - landfill for industrial residues; the problem of treatment and final disposer of domestic garbage in Brazil; recycling of the lubricant oils used in brazil; legislation.

  3. Spanish solid wastes legislation; Legislacion espanola de Residuos Solidos

    Energy Technology Data Exchange (ETDEWEB)

    Castrillon Pelaez, L.; Maranon Maison, E.; Rodriguez Iglesias

    2001-07-01

    A review is made of the regulations in the field of solid wastes with the aim of providing a useful working tool for those entities that generate or manage some type of waste. The coming into force of the current Spanish Wastes Law establishes common regulations for all wastes, substituting all previous Municipal Waste and Toxic and Dangerous Waste Laws. For reasons of greater practical applicability, we have preferred in this paper to classify wastes on the basis of their characteristics. The regulations are thus presented in a series of sections: municipal waste, dangerous wastes, sewage plant sludge, cattle waste and specific risk materials, highlighting in each case those areas of the regulations that are of greater interest for the producers and managers of solid wastes. (Author)

  4. Management of solid municipal wastes. Gestion de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The book analyzes in detail the problematic that exists today with the solid municipal wastes: legislation, sanitary landfills, recycling, materials recovery, anaerobic digestion, gasification and the problem in the European Community. The book has 17 chapters corresponding to the course, imported at CIEMAT by the Institute of Energy Studies.

  5. Resveratrol immobilization and release in polymeric hydrogels; Incorporacao e liberacao de resveratrol em hidrogeis polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Momesso, Roberta Grazzielli Ramos Alves Passarelli

    2010-07-01

    Resveratrol (3, 4', 5-trihydroxystilbene) is a polyphenolic produced by a wide variety of plants in response to injury and found predominantly in grape skins. This active ingredient has been shown to possess benefits for the health, such as the antioxidant capacity which is related to the prevention of several types of cancer and skin aging. However, the oral bioavailability of resveratrol is poor and makes its topical application interesting. The purpose of this study was to immobilize resveratrol in polymeric hydrogels to obtain a release device for topical use. The polymeric matrices composed of poli(N-vinyl-2-pyrrolidone) (PVP), poly(ethyleneglycol) (PEG) and agar or PVP and glycerol irradiated at 20 kGy dose were physical-chemically characterized by gel fraction and swelling tests and its preliminary biocompatibility by in vitro test of cytotoxicity using the technique of neutral red uptake. Due to low solubility of resveratrol in water, the addition of 2% ethanol to the matrices was verified. All matrices showed a high crosslinking degree, capacity of swelling and the preliminary cytotoxicity test showed nontoxicity effect. The devices were obtained by resveratrol immobilization in polymeric matrices, carried out in a one-or-two-steps process, that is, before or after irradiation, respectively. The one step resveratrol devices were characterized by gel fraction, swelling tests and preliminary biocompatibility, and their properties were maintained even after the resveratrol incorporation. The devices containing 0,05% of resveratrol obtained by one-step process and 0,1% of resveratrol obtained by two-steps process were submitted to the release test during 24 h. Resveratrol quantification was done by high performance liquid chromatography (HPLC). The results obtained in the kinetics of release showed that only the devices obtained by two-step process release the resveratrol, which demonstrate antioxidant capacity after the release. (author)

  6. O processo de formação em saúde: o saber resíduos sólidos de serviços de saúde em vivências práticas El proceso de formación en salud: el tema residuos solidos de servicios de salud en vivencias prácticas The process of education in health: practical knowledge on solid wastes from healthcare services

    Directory of Open Access Journals (Sweden)

    Luciara Bilhalva Corrêa

    2007-02-01

    Full Text Available O manejo inadequado dos Resíduos Sólidos em Serviços de Saúde (RSSS representa uma fonte de degradação, oferecendo risco ao ambiente e à saúde. Enfatizar esta questão no processo de formação requer considerar os indivíduos que atuam nestes espaços, na construção de uma consciência ética, em busca da qualidade de vida e sustentabilidade. Para conhecer como o manejo dos RSSS vem sendo construído nos cursos de Enfermagem/Obstetrícia, Odontologia, Medicina e Medicina Veterinária, realizaram-se entrevistas com vinte e um sujeitos, coordenadores, docentes e alunos de uma IFES no sul do país, além de uma análise documental. A partir da análise de conteúdo, é possível afirmar que os futuros profissionais vivenciam ações relacionadas à segregação, acondicionamento e coleta em alguns ambientes, porém sem uma compreensão da totalidade deste manejo.El manejo inadecuado de los Residuos Solidos en los Servicios de Salud (RSSS representa una fuente de degradación, ofreciendo riesgo al ambiente y a la salud. Resaltar esta cuestión en el proceso de formación requiere considerar los individuos que actuan en estes espacios, en la construcción de una consciencia ética, buscando calidad de vida y sostenibilidad. Para conocer como el manejo de los RSSS está siendo construido en los cursos de Enfermería/Obstetricia, Odontología, Medicina y Medicina Veterinaria, se conducieron entrevistas con veinte y uno sujetos, coordenadores, docientes y estudiantes de una universidad en el sur de Brasil, así como una análisis documentaria. El análisis del contenido permitió afirmar que los profesionales futuros vivencian acciones relacionadas a la segregación, acondicionamiento y coleta en algunos ambientes, pero sin una comprensión de la totalidad de ese manejo.Improper management of solid wastes from healthcare services is a source of contamination and risk to the environment and to the public health. Emphasizing this matter in the

  7. Fuel cells using ionic liquids as electrolyte and operating at room temperature; Celulas de combustivel utilizando como eletrolito liquidos ionicos e operando a temperatura ambiente

    Energy Technology Data Exchange (ETDEWEB)

    Botton, Janine Padilha; Souza, Roberto Fernando de; Goncalves, Reinaldo Simoes; Dupont, Jairton [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica], e-mail: janine@iq.ufrgs.br

    2004-07-01

    The room temperature imidazolium based ionic liquids, such as 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF4) are outstanding electrolytes for fuel cells. A 67% overall cell efficiency is achieve using these liquids as supporting electrolytes for a commercially available alkaline fuel cell (AFC) at room temperature operating with air and hydrogen at atmospheric pressure. (author)

  8. Characterization of montmorillonite-Ca to use polymer nanocomposites; Caracterizacao de argila esmectitica modificada visando seu uso em nanocompositos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Neto, Joao E.; Neto, Jose C.M.; Campo, Eduardo R.B. del, E-mail: joao_evengelista_neto@yahoo.com [Universidade do Estado do Amazonas (UEAM), Manaus, AM (Brazil). Coordenacao de Engenharia de Materiais; Nascimento, Nayra R. do [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Departamento de Engenharia de Materiais e Bioprocessos; Diaz, Francisco Rolando Valenzuela [Universidade de Sao Paulo (USP), SP (Brazil). Departamento de Engenharia Metalurgica e Materiais

    2015-07-01

    Bentonite is an important type of industrial clays due to its rheological properties or accession that are dependent on its high hydrophilicity. This clay has the capability of being modified with organic compounds by treatment with ammonium quaternary salts. After the clay treatment with these salts it presents a high degree of swelling property in organic liquids. Due to this swelling characteristics, the bentonite can be used in dispersions of organic liquids viscous and thixotropic. Another focus of interest this clay is in industry and academia because of its potential use in the adsorption of toxic substances and as fillers in nanocomposites clay / polymer. The objective of this study is to characterize a Cuban calcium bentonite modified with sodium dodecyl sulfate. The clay was characterized by X-ray diffraction, particle size analysis by laser diffraction and scanning electron microscopy. (author)

  9. ESTUDIO TEORICO EXPERIMENTAL DEL FENOMENO DE MIGRACION ESPECIFICA EN MATERIALES POLIMERICOS UTILIZADOS EN EL ENVASADO DE ALIMENTOS

    OpenAIRE

    TORRES MEDIANO; ALEJANDRA; TORRES MEDIANO; ALEJANDRA

    2011-01-01

    El proceso de transferencia de masa de componentes desde los envases hacia los alimentos determina la calidad sensorial y el grado de inocuidad del producto envasado. El presente estudio está enfocado a un análisis teórico-experimental del fenómeno de migración específica, utilizando diferentes tipos de simulantes de alimentos, considerando además el efecto de la concentración de migrante, el espesor de los films plásticos y la temperatura. La metodología del estudio comprende anális...

  10. TiO2 sintetizado por el método de precursor polimerico (Pechini: estructura de la resina intermedia

    Directory of Open Access Journals (Sweden)

    Rodriguez Paez, J. E.

    2011-10-01

    Full Text Available In this work, the polymeric precursor method (Pechini method was used to synthesize titanium dioxide. This process allowed a bigger control on the purity of the oxide and the crystalline phase present in the material. In this case, the principal phase was anatase. The resine obtained in this process was characterized using NMR and IR spectroscopy to determine their structure. With this information we proposed a resine structure model. To finish the process, the resin was thermally treated to obtain TiO2. This oxide was characterized using different techniques: ray-X diffraction (RDX and electron microscopy (TEM and SEM. The results indicated that the TiO2 anatase phase can be obtained at 450ºC with a particle size En este trabajo se ha utilizado el método de precursor polimérico (método de Pechini para sintetizar dióxido de titanio, proceso que ha permitido tener un mayor control sobre la pureza del óxido y el tipo de fase que ha presentado el material obtenido, fase anatasa en el presente caso. Durante el proceso de síntesis se ha obtenido una resina que se ha caracterizado utilizando la espectroscopia de Resonancia Magnética Nuclear (RMN y la espectroscopia infrarroja con transformada de Fourier (FTIR para determinar su estructura y con base en ella se ha propuesto un modelo para la conformación de la misma. Posteriormente esta resina se ha sometido a un tratamiento térmico para obtener los polvos cerámicos que se han caracterizado empleando diferentes técnicas, principalmente, difracción de rayos X (DRX y microscopia electrónica (MET y MEB. Los resultados indican que se puede obtener TiO2 fase anatasa a los 450ºC con un tamaño de partícula < 100nm.

  11. Silicon dioxide obtained by Polymeric Precursor Method; Obtencao de dioxido de silicio pelo Metodo dos Precursores Polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, C.T.; Granado, S.R.; Lopes, S.A.; Cavalheiro, A.A., E-mail: cinthia_quimica@hotmail.com [Universidade Estadual de Mato Grosso do Sul (CPTREN/UEMS), Navirai, MS (Brazil). Centro de Pesquisas Tecnologicas em Recursos Naturais

    2011-07-01

    The Polymeric Precursor Method is able for obtaining several oxide material types with high surface area even obtained in particle form. Several MO{sub 2} oxide types such as titanium, silicon and zirconium ones can be obtained by this methodology. In this work, the synthesis of silicon oxide was monitored by thermal analysis, XRD and surface area analysis in order to demonstrate the influence of the several synthesis and calcining parameters. Surface area values as higher as 370m2/g and increasing in the micropore volume nm were obtained when the material was synthesized by using ethylene glycol as polymerizing agent. XRD analysis showed that the material is amorphous when calcinated at 600°C in despite of the time of calcining, but the material morphology is strongly influenced by the polymeric resin composition. Using Glycerol as polymerizing agent, the pore size increase and the surface area goes down with the increasing in decomposition time, when compared to ethylene glycol. (author)

  12. ANÁLISIS DEL MANEJO DE RESIDUOS SÓLIDOS HOSPITALARIOS EN EL HOSPITAL NACIONAL CARLOS ALBERTO SEGUÍN ESCOBEDO, ESSALUD. AREQUIPA, 2009

    OpenAIRE

    ARANA ZEVALLOS, MARÍA ELENA

    2014-01-01

    ANTECEDENTES ASPECTOS LEGALES DEFINICIÓN DE RESIDUOS SOLIDOS HOSPITALARIOS CLASIFICACIÓN DE LOS RESIDUOS SOLIDOS HOSPITALARIOS RESIDUOS BIOMÉDICOS CICLO DEL MANEJO DE RESIDUOS SOLIDOS HOSPITALARIOS DIAGNOSTICO ETAPAS DEL MANEJO DE LOS RESIDUOS SOLIDOS HOSPITALARIOS ACONDICIONAMIENTO SEGREGACIÓN Y ALMACENAMIENTO PRIMARIO ALMACENAMIENTO INTERMEDIO TRANSPORTE INTERNO ALMACENAMIENTO FINAL RECOLECCIÓN EXTERNA DISPOSICIÓN FINAL TECNOLOGÍAS DE TRATAMIENTO DE RESIDUOS SOLIDOS HOSPITALARIOS CRITERIOS ...

  13. Solid targets for production of radioisotopes with cyclotron; Blancos solidos para produccion de radioisotopos con ciclotron

    Energy Technology Data Exchange (ETDEWEB)

    Paredes G, L.; Balcazar G, M. [Instituto Nacional de Investigaciones Nucleares, Direccion de Investigacion Tecnologica, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1999-07-01

    The design of targets for production of radioisotopes and radiopharmaceuticals of cyclotron to medical applications requires a detailed analysis of several variables such as: cyclotron operation conditions, choice of used materials as target and their physicochemical characteristics, activity calculation, the yielding of each radioisotope by irradiation, the competition of nuclear reactions in function of the projectiles energy and the collision processes amongst others. The objective of this work is to determine the equations for the calculation for yielding of solid targets at the end of the proton irradiation. (Author)

  14. Municipal solid wastes composting: Estrela (Brasil); Compostaje de residuos solidos municipales: el ejemplo de Estrela, brasil

    Energy Technology Data Exchange (ETDEWEB)

    Konrad, O.; Bezama, A.; Navia, R.; Lorber, K. E.

    2002-07-01

    In Estrela, Rio Grande do Sul, Brazil, an improved separation system for the municipal solid wastes was implemented. The objective is to enhance the performance of the composting process of the solid wastes. In the original separation system, the fractions corresponding to organic matter, recyclable materials and the light-weight fraction (destined to sanitary landfill) were obtained, where the organic fraction reached a 70%. This fraction was destined to a composting process which after 80 days of processing was still in the thermophilic stage and had to be later stabilized through a worm composting process. In order to improve this situation, a modified system was proposed and implemented. In this way, four fractions were obtained during the separation process: a light fraction destined to sanitary land filling, a recyclable materials fraction and two organic fractions. (Author) 8 refs.

  15. External costs of the urban solid wastes collect; Custos externos da coleta de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luciano Basto; Cruz, Luiz Eduardo Reis da

    2002-07-01

    This work performs a comparison of the urban solid wastes collect through the use of two alternatives: traditional and selective collect, by using the social, operational and external costs (environmental and social). The work demonstrates that, nevertheless the initial costs of the selective collects are higher than the traditional collects, the traditional aggregated social costs are inversely proportional to the traditional collect.

  16. El aprovechamiento de residuos solidos y su incidencia cultural, social y ambiental en Tunja

    Directory of Open Access Journals (Sweden)

    Diana Liseth Angarita Lozano

    2013-08-01

    Full Text Available Este artículo es el resultado de un proyecto de investigación que comenzó en el año 2007, motivado por la articulación de entidades públicas y privadas interesadas en crear cultura ambiental urbana en la ciudad de Tunja, a partir de la concienciación ambiental particularmente enfocada al adecuado manejo de los residuos sólidos desde la fuente y con el aporte de la Academia en la sensibilización a la comunidad y a los principales actores de la Gestión Integral de Residuos Sólidos. Como resultado, se creó la Primera Asociación de Recicladores de Tunja; se crearon cuatro rutas selectivas de material aprovechable en la ciudad, lo cual generó la reducción de la cantidad de residuos sólidos dispuestos en el Relleno Sanitario de Pirgua y permitió el aprovechamiento del material recuperado, se redujeron las tarifas del servicio de aseo en la ciudad, se motiváron cambios en la comunidad tunjana con respecto al manejo de los residuos desde los hogares, así como también se logró la aceptación social y reconocimiento de la población recicladora de la ciudad.

  17. Solid wastes management in petroleum refineries; Gerenciamento de residuos solidos em refinarias de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Lizabela Souza de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica]|[Agencia Nacional de Petroleo, Brasilia, DF (Brazil)]. E-mail: lizabela@eq.ufrj.br; Nicolaiewsky, Elioni [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Quimica]. E-mail: elioni@eq.ufrj.br; Freire, Denize Dias de Carvalho [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Bioquimica]. E-mail: denize@eq.ufrj.br

    2002-07-01

    This work performs a survey on the solid wastes generated from petroleum refining activities. The possible environmental impacts are analysed and procedures for disposal and treatment are suggested. The treatment techniques are detached: minimization, incineration, co-processing, bioremediation and industrial embankments.

  18. Handbook of Combustion of urban solid wastes; Manual de Incineracion de Residuos Solidos Urbanos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The book presents the state of the art of urban solid wastes combustion in the European Union and more specifically in Spain. the technical, economics, environmental and administrative aspects are analyzed.

  19. Fuels from solid municipal wastes. Combustibles procedentes de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    This article presents the refuse derived fuel treatment, through German, Spanish, British and Italian experience. calonifif value of refuse derived fuel, management of municipal wastes and project in the future are presented. (Author)

  20. Waste treatment of combustion municipal wastes. Tratamiento de residuos provenientes de combustion de Residuos Solidos Urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Brenot, M.

    The polluting substances that are initially in the smoke produced in the combustion of refuse, are newly met in the solid wastes coming from the treatment of this smoke. If it is necessary to avoid any risk of polluting transference, it is convenient to neutralize these wastes. There are three main systems that are nextly explained. (Author)

  1. Quality of compost from urban solid wastes; Calidad del compost de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Tejada, M.; Dobao, M.M. [Universidad de Sevilla. Sevilla (Spain); Benitez, C; Gonzalez, J. L. [Universidad de Cordoba. Cordoba (Spain)

    1998-12-31

    The stability, maturity and quality of MSW compost are discussed in this paper. The higher or lower stability is related to the microbial activity, but the maturity is related with the absence of phitotoxic substances. The MSW compost quality is fixed, besides of its stability/maturity, by other parameters (heavy metals contents, granulometric composition, etc...) Likewise, this paper shows a revision about the chemist, physics and biologic methods for the definition of this concepts. (Author) 51 refs.

  2. MODIFICACION SINTETICA DE ALCANFOR Y REACTIVIDAD DE PINENO Y OXIDO DE PINENO SOBRE CATALIZADORES SOLIDOS.

    OpenAIRE

    MIRANDA MIRANDA, ALBERTO BALERIANO; MIRANDA MIRANDA, ALBERTO BALERIANO

    2003-01-01

    En esta Tesis Doctoral se diseñaron rutas para la síntesis de ligandos de aminoalcoholes derivados de R-(+)-alcanfor con el fin de obtener nuevos complejos metálicos en síntesis asimétrica. Se utilizó como material de partida y como modelo de síntesis la 124p.

  3. Solid hydrides as hydrogen storage reservoirs; Hidruros solidos como acumuladores de hidrogeno

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, A.; Sanchez, C.; Friedrichs, O.; Ares, J. R.; Leardini, F.; Bodega, J.; Fernandez, J. F.

    2010-07-01

    Metal hydrides as hydrogen storage materials are briefly reviewed in this paper. Fundamental properties of metal-hydrogen (gas) system such as Pressure-Composition-Temperature (P-C-T) characteristics are discussed on the light of the metal-hydride thermodynamics. Attention is specially paid to light metal hydrides which might have application in the car and transport sector. The pros and cons of MgH{sub 2} as a light material are outlined. Researches in course oriented to improve the behaviour of MgH{sub 2} are presented. Finally, other very promising alternative materials such as Al compounds (alanates) or borohydrides as light hydrogen accumulators are also considered. (Author)

  4. State of the art of solid state dosimetry; Estado da arte em dosimetria do estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Susana O., E-mail: sosouza@ufs.br [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil); Yamamoto, Takayoshi [Radioisotope Research Center, Osaka University (Japan); D' Errico, Francesco, E-mail: francesco.derrico@yale.edu [Yale University, School of Medicine, CT (United States)

    2014-07-01

    Passive solid-state detectors still dominate the personal dosimetry field. This article provides state of the art in this field and summarizes the most recent works presented on TL, OSL and RPL during the 17th International Conference on Solid State Dosimetry held in Recife in September 2013. The Article contains in particular the techniques Thermoluminescence (TL), Optically Stimulated Luminescence (OSL), radio photoluminescence (RPL). Thermoluminescence has the biggest advantage of the wide availability of commercial materials for dosimetry, and the nature tissue-equivalent of several of these materials. The limitation of the TL dosimetry presents fading luminance signal and the need for high temperatures to obtain the signal. The Optically Stimulated Luminescence has the advantages of high sensitivity, the possibility of multiple reading, while its limit is the need to use response compensating filters in addition to the high cost of equipment and dosimeters still restricted very few options trading . The radio photoluminescence has a reading that is completely non-destructive, but their dosimeters present lack of tissue-equivalent and a high cost. Presents the details of the techniques and the advantages and limitations of each of these will be discussed.

  5. Funciones en el modelado de solidos y paradigmas de diseño

    OpenAIRE

    Solano Albajés, Lluís; Vigo Anglada, Marc; Puig Puig, Anna

    2001-01-01

    En este artículo se describen y analizan las diferentes funciones de modelado de sólidos más comunes que ofrecen los actuales sistemas de CAD. Se explican también las limitaciones e inconsistencias a qué pueden dar lugar el uso de dichas funciones. Por otro lado, también se analizan y comparan los diferentes paradigmas de diseño con los que trabajan los actuales sistemas. Se describe, evalúa y compara el paradigma clásico basado en operaciones booleanas, con los ...

  6. Negotiated destination for industrial solid wastes; Destinos negociados para residuos solidos industriales

    Energy Technology Data Exchange (ETDEWEB)

    Fehr, M.; Kuranishi, V. H.

    1999-07-01

    Executed as a cooperative activity between the graduate school and the industrial complex, this study develops an empirical model for industrial waste management in the Uberlandia region. The present situation is defined through the collection of data and information at the municipal landfill and the main waste sources. Pioneer companies are identified who have implemented their Environmental Management System through the use of widely available management tools. As the most significant result, the study points to the need for only one landfill in the municipality that takes cares of household and industrial waste. (Author) 21 refs.

  7. Sorption of {sup 60} Co on inorganic solids; Sorcion de {sup 60} Co en solidos inorganicos

    Energy Technology Data Exchange (ETDEWEB)

    Granados C, F.; Bulbulian G, S. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico); Mardel V, B. [UAM-I, 09340 Mexico D.F. (Mexico)

    2003-07-01

    The behavior of sorption of the {sup 60} Co in aqueous solution under static conditions to different values of pH of the aqueous solution (1, 3, 5, 7, and 10) on MgO, MnO{sub 2}, SnO, TiO{sub 2}, activated carbon and calcinate hydrotalcite was investigated. It was found that the best sorbents of the {sup 60} Co was the MnO{sub 2}, activated carbon and TiO{sub 2} whose sorption was incremented when increasing the pH value of the aqueous solutions, in the one case of the hydrated oxides, the {sup 60} Co interacted with the electrically charged surface of the sorbents that depends on the pH of the solution and of the point of zero charge (zpc) of the sorbent. (Author)

  8. Polymer composites for optical imaging and X-rays in hydraulic simulation tanks; Compositos polimericos para imageamento optico e por raios-x em tanques de simulacao hidraulica

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Maria H.S.; Goncalves, Raiane V.; Basso, Nara R.S.; Moura, Cassio S., E-mail: maria.helena@acad.pucrs.br, E-mail: raiane.goncalves@acad.pucrs.br, E-mail: nrbass@pucrs.br, E-mail: cassio.moura@pucrs.br [Pontificia Universidade Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil)

    2015-07-01

    This research is related to new approaches for non-invasive imaging techniques that allows registering the internal architecture of sedimentary deposits generated in hydraulic simulation tanks to better understand the behavior of density currents. Polymeric composite with properties and characteristics similar to coal 205 was prepared with inorganic filler for non-destructive tests. It was used an orthophthalic polyester resin with different dye loads and barium sulfate as inorganic filler. Tests on x-ray Microtomography showed that the barium sulphate provides the necessary opacity for detection with such technique. Scanning electron microscopy allowed evaluating and classifying the shape of the matrix and measuring the nanometric dimensions of the filler. Specific mass and drop rate were also evaluated and it was found that the incorporation of dye and filler did not affected significantly the desired characteristics. For this reasons, the composite prepared show potential use in simulations and non-invasive imaging. (author)

  9. Influence of the stacking sequence of layers on the mechanical behavior of polymeric composite cylinders; Influencia da configuracao de bobinagem no comportamento mecanico de cilindros de composito polimerico

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Osni de

    2006-07-01

    This work evaluated experimentally the influence of the stacking sequence of layers symmetrical and asymmetrical on the mechanical behavior of polymeric composite cylinders. For so much, two open-ended cylinders groups were manufactured by filament winding process, which had different stacking sequence related to the laminate midplane, characterizing symmetrical and asymmetrical laminates. The composite cylinders were made with epoxy matrix and carbon fiber as reinforcement. For evaluation of the mechanical strength, the cylinders were tested hydrostatically, which consisted of internal pressurization in a hydrostatic device through the utilization of a fluid until the cylinders burst. Additionally, were compared the strains and failure modes between the cylinders groups. The utilization of a finite element program allowed to conclude that this tool, very used in design, does not get to identify tensions in the fiber direction in each composite layer, as well as interlaminar shear stress, that appears in the cylinders with asymmetrical stacking sequence. The tests results showed that the stacking sequence had influence in the mechanical behavior of the composite cylinders, favoring the symmetrical construction. (author)

  10. Failure detection in polymeric insulators by using digital radiography and pattern recognizing; Deteccao de defeitos em isoladores polimericos por meio da radiografia digital e reconhecimento de padroes

    Energy Technology Data Exchange (ETDEWEB)

    Godoi, Walmor Cardoso; Swinka-Filho, Vitoldo [LACTEC - Instituto de Tecnologia para o Desenvolvimento, Curitiba, PR (Brazil)]. E-mail: walmor@lactec.org.br; vitoldo@lactec.org.br; Silva, Romeu Ricardo da [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Eletrica]. E-mail: romeu@romeu.eng.br; Loddi, Tarcisio [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil)]. E-mail: loddi@copel.com

    2005-04-15

    This paper presents the obtained results of pattern recognition methodology application of polymeric isolators radiographic images used on 15 kV class power distribution transmission lines for the detection of failures on semi or automatic inspections. An original portable system of digital radiography (RDP system), developed at the Laboratory of Instrumentation for Material Diagnosis of LACTEC, will be also presented. The methodologies developed for the automatic failures recognition basically involve the pre-processing of digital radiographs (using a low-pass filter), the region of interest and the defects segmentation, the extraction of the 13 characteristics from the 714 segmented regions and, the defects and regular structures classification. As the paper is approaching an original and few explored research, the obtained results in the defect detection up to the moment have been satisfactory for such publication.

  11. Automatic detection of flaws in polymer insulators using 3D industrial tomography; Deteccao automatica de vazios em isoladores polimericos por tomografia industrial 3D

    Energy Technology Data Exchange (ETDEWEB)

    Godoi, Walmor Cardoso; Swinka-Filho, Vitoldo [Instituto de Tecnologia para o Desenvolvimento (LACTEC), Curitiba, PR (Brazil)], Emails: walmor@lactec.org.br, vitoldo@lactec.org.br; Geus, Klaus de [Companhia Paranaense de Energia (Copel), Curitiba, PR (Brazil)], Email: klaus@copel.com; Silva, Romeu Ricardo da [SENAI-RJ Solda (CTS/Solda), Rio de Janeiro, RJ (Brazil). Centro de Tecnologia], Email: rrdsilva@firjan.org.br

    2009-10-15

    This work presents a methodology for the automatic detection of flaws in polymer insulators using three-dimensional industrial computed tomography (CT), as well as results obtained in the context of power distribution networks. The CT slices were reconstructed using 180 digital radiographs (projections) acquired by a high resolution system (pixel dimension of 50 {mu}m x 50 {mu}m, a-Si). For the reconstruction of 3D CT, 50 {mu}m wide bit map slices were used. The Marching Cubes algorithm was used to perform the 3D reconstruction, using the Visualization Tool kit (VTK) library and the Java programming language (64 Bits Linux platform). Nine features were obtained from the reconstructed three-dimensional objects for the neural networks training. Results showed to be satisfactory. (author)

  12. Evaluation of the aging of polymeric drilling fluids to oil wells; Avaliacao do envelhecimento de fluidos de perfuracao polimericos para pocos de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Farias, K.V.; Amorim, L.V. [Universidade Federal de Campina Grande, PB (Brazil). Unidade Academica de Engenharia Mecanica, UAEM/CCT - UFCG], e-mail: kassie@dem.ufcg.edu.br; Leite, R.S. [Universidade Federal de Campina Grande, PB (Brazil). Graduacao Engenharia de Materiais; Lira, H.L. [Universidade Federal de Campina Grande, PB (Brazil). Unidade Academica de Engenharia de Materiais, UAEMa/ CCT - UFCG

    2010-07-01

    The aim of this work is to evaluate the aging of polymeric drilling fluids to oil wells, from the rheological, filtration and lubricity properties in the temperatures 100 degree F ({approx} 38 degree C) and 150 degree F ({approx} 66 degree C). The results had been compared with a standard fluid used for the oil industry and had evidenced that the polymeric fluids had presented good thermal stability, presenting a small reduction in the rheological properties and better values of lubricity coefficient that a reference fluid. (author)

  13. Characterization of taquara-lixa (Merostachys skvortzovii Sendulsky) fibers for use in polymer composites; Caracterizacao de fibras de taquara-lixa (Merostachys skvortzovii Sendulsky) utilizaveis em compositos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Borges Neto, Camilo; Flores-Sahagun, Thais H.S.; Andrade, Alan S. de; Mazzaro, Irineu, E-mail: cyborg@ufpr.br [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

    2015-07-01

    Characterization of untreated or alkali-treated 'taquara-lixa' (Merostachys skvortzovii Sendulsky ), a low cost Brazilian bamboo fiber, was performed by determining their chemical composition (moisture, ash, lignin and extractives contents), solubility in hot or cold water, pH values and crystallinity index. Thermal analysis showed that fibers begin to degrade at 250 deg C. Samples of taquara-lixa/epoxy resin composites were prepared with 56% w/w aligned long fibers (280 mm) and with 54% (w/w) dispersed short fibers (25 mm) and a sandwich-beam sample shaped in three layers was prepared with two outer long fiber composite layers separated by a thicker layer of the short fiber material. Composites were characterized by x-ray diffraction patterns, water and moisture absorption and flexural tests. Elasticity and shear modulus of composites (15500 MPa and 932 MPa/6800 MPa and 1042 MPa for long and short composites, respectively) indicated that these materials can be used for structural applications, with the advantage of low water (8.4%) and low moisture (2.4-2.8%) absorption. (author)

  14. Esterification and characterization of lignin aiming the synthesis of polymeric composite; Esterificacao e caracterizacao da lignina visando a sintese de compositos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Victor, Priscilla A.; Machado, Fabricio, E-mail: fmachado@unb.br [Universidade de Brasilia (UnB), DF (Brazil). Instituto de Quimica; Goncalves, Silvia B., E-mail: silvia.belem@embrapa.br [Embrapa Agroenergia, Parque Estacao Biologica (PqEB), Brasilia, DF (Brazil)

    2015-07-01

    Lignin is a natural polymer derived from lignocellulosic materials with high availability, presenting a huge potential for production of new materials. Due to its complex macromolecular structure, and its low compatibility with styrene, eucalyptus wood-extracted lignin method was esterified with methacrylic anhydride - exhibiting a yield of 64% - in order to ensure homogeneity in the organic phase into the reaction medium. The evaluation of both the natural and esterified lignin through infrared (IR) spectroscopy showed a decrease of the hydroxyl band, characteristic of natural lignin (3200-3400 cm{sup -1}) and an increase of the characteristic ester band (1720 to 1740 cm{sup -1}). According to nuclear magnetic resonance ({sup 1}H NMR) analysis on esterified lignin, intense peaks were observed in the range from 1.7 to 2.05 ppm (-CH{sub 3}) and 5.4 ppm to 6.2 ppm (=CH{sub 2}), related to methacrylic anhydride. According to the thermogravimetric analysis (TGA), the esterified lignin showed a decrease in its thermal stability when compared to natural lignin, exhibiting two main weight losses between 200 °C and 300 °C and in the interval from 550 °C to 800 °C. Comparatively, the esterified lignin also displayed an increase in its glass transition temperature (Tg = 98 °C) for, when compared to natural lignin, whose Tg value was determined to be equal to 91 °C. (author)

  15. Preparation and performance of Ecobras/bentonite biodegrading films; Preparacao e desempenho de filmes polimericos biodegradaveis a base de Ecobras e bentonita

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Ana Nery M.; Melo, Nadja M.C.; Canedo, Eduardo L.; Carvalho, Laura H., E-mail: laura@dema.ufcg.edu.br [Unidade Academica de Engenharia de Materiais, Universidade Federal de Campina Grande (UAEMa/UFCG) Campina Grande, PB (Brazil); Araujo, Arthur R.A. [Felinto Industria e Comercio Ltda., Campina Grande, PB (Brazil)

    2011-07-01

    Compounds based on the biodegradable polymer Ecobras and bentonite clay in its pristine, sonicated, and organically modified with a quaternary ammonium salt forms were prepared as flat films. Clays and compounds were characterized by x-ray diffraction and scanning electron microscopy. Mechanical properties of the films were determined according to pertinent ASTM standards. Reasonable properties, higher than those of the matrix, were obtained with compounds prepared with purified clays and organoclays, particularly for low clay loading. (author)

  16. Synergy and lubricant effect of biosurfactant/biodiesel addition in polymeric fluids; Acao lubrificante e sinergia da adicao de biosurfactante/biodiesel em fluidos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Suzan I.G.; Costa, Marta; Macedo, Sinara P.N. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    The lubricity coefficient (CL) and filtrate volume of the polymeric drilling fluids contained glycerin, paraffin, biodiesel and biosurfactant were investigated to evidence the influence and efficiency when used individually or through associated. All the tested fluids were aged in rotative oven for 16 hours, at 200 deg F. In this study, the association of biodiesel with biosurfactant proved to be promising because it reduced the CL in 87% and the volume of filtered by 22%. Those results become promising when the applicability is approached in perforation of wells, because it means a smaller wear and tear of the drills when we told the lubricity data, and a smaller damage the formation when we provided a smaller invasion of the perforation fluid the formations. To evaluate the effect of the degradation of the products, the fluids were stocked to room temperature by thirty (30) days, being soon afterwards. That time of stockpiling went ideal to the hydration of the molecules, because its viscosity was alters sensibly and influencing positively in the filtrate and in rheologic mediated. (author)

  17. Evaluation of differential risk of arrest of drilling and polymeric fluids; Avaliacao do risco de prisao diferencial de fluidos de perfuracao hidroargilosos e polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Sarmento, L.R.B.; Lira, D.S.; Nascimento, R.C.A.M.; Amorim, L.V. [Universidadde Federal de Campina Grande (UFCG), PB (Brazil)], Email: ligia_rafa@hotmail.com

    2010-07-01

    This work evaluates the risk of differential sticking (DS) of clay and water based drilling fluids, before and after adding polymer and lubricant additives, and polymeric fluids. From the results, it was concluded that the addition of lubricant to the clay and water based fluids reduces the torque necessary to free the pipes that are stuck by differential pressure, as for the polymeric fluids presented the lowest filtration losses, cake thickness, differential sticking coefficient and DS risk. (author)

  18. Treatment of chemical waste piassava for application in polymeric composites; Tratamento quimico do residuo de piacava para aplicacao em compositos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, C.S.; Fiuza, R.P.; Guimaraes, D.H.; Carvalho, G.G.P.; Carvalho, R.F.; Jose, N.M., E-mail: cleidienesm@gmail.co [Universidade Federal da Bahia (GECIM/UFBA), Salvador, BA (Brazil). Inst. de Quimica. Grupo de Energia e Ciencias dos Materiais

    2010-07-01

    Piassava fibers were investigated with the aim of adding new business value. The surface of the fibers were treated with NaOH and H{sub 2}SO{sub 4} for 1 h at room temperature. The samples were characterized by FTIR, TGA, DSC, chemical composition, XRD, SEM and tensile tests. The micrographs of the fibers showed that treatment with NaOH cleaned the fiber surface of a large amount of impurities and cause fibrillation. Chemical analysis, using the Van Soest method, showed that the palm fiber is a fiber rich in lignin, as evidenced by their brown color and with alkali treatment there was partial removal of hemicellulose and lignin, increasing the crystallinity index of the fiber, observed by XRD. The acid treatment caused no significant changes in the properties of the fiber. Therefore, the mercerisation was efficient in the fiber of palm fiber, improving their properties, enabling thus their use as reinforcement in polymer composites. (author)

  19. Preparation and characterization of polymer nanocomposites based on chitosan and clay minerals; Preparacao e caracterizacao de nanocompositos polimerico baseados em quitosana e argilo minerais

    Energy Technology Data Exchange (ETDEWEB)

    Fiori, Ana Paula Santos de Melo; Gabiraba, Victor Parizio; Praxedes, Ana Paula Perdigao [Instituto Federal de Alagoas (IFAL), Marechal Deodoro, AL (Brazil); Nunes, Marcelo Ramon da Silva; Balliano, Tatiane L.; Silva, Rosanny Christhinny da; Tonholo, Josealdo; Ribeiro, Adriana Santos, E-mail: aribeiro@qui.ufal.br [Universidade Federal de Alagoas (UFAL), Maceio, AL (Brazil)

    2014-09-15

    In this work nanocomposites based on chitosan and different clays were prepared using polyethyleneglycol (PEG) as plasticizer. The samples obtained were characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), thermogravimetric analysis (TGA/DTG) and by mechanical characterization (tensile test) with the aim of investigating the interactions between chitosan and clay. The nanocomposite films prepared using sodium bentonite (Ben) showed an increase of 81.2% in the maximum tensile stress values and a decrease of 16.0% in the Young’s modulus when compared to the chitosan with PEG (QuiPEG) films, evidencing that the introduction of the clay into the polymer matrix provided a more flexible and resistant film, whose elongation at break was 93.6% higher than for the QuiPEG film. (author)

  20. Comparison between rice husk ash and commercial silica as filler in polymeric composites; Comparacao de cinza de casca de arroz e silica comercial como carga em compositos polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, I.J.; Calheiro, D.; Santos, E.C.A. dos; Oliveira, R.; Rocha, T.L.A.C.; Moraes, C.A.M., E-mail: ijk.fernandes@gmail.com [Universidade do Vale do Rio dos Sinos (UNISINOS), Sao Leopoldo, RS (Brazil). Pos-Graduacao em Engenharia Civil

    2014-07-01

    The use of rice husk ash (RHA) as filler in polymeric materials has been studied in different polymers. Research reported that RHA may successfully replace silica. The silica production process using ore demands high energy input and produces considerable amounts of waste. Therefore, the replacement of silica by RHA may be economically and environmentally advantageous, reducing environmental impact and adding value to a waste material. In this context, this study characterizes and compares RHA of different sources (travelling grate reactor and fluidized bed reactor) with commercially available silicas to assess performance as filler in polymeric materials. Samples were characterized by X-ray fluorescence, loss on ignition, X-ray diffraction, grain size, specific surface area and specific weight. The results show that RHA may be used as a filler in several polymeric materials.(author)

  1. Evaluation by instrumented indentation of the damage caused by gamma radiation on polymeric materials; Avaliacao por indentacao instrumentada dos danos causados pela radiacao gama em materiais polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, M.P.; Azevedo, E.C.; Miquelin, C.A.; Soboll, D.S., E-mail: helunica@yahoo.com.b [Universidade Tecnologica Federal do Parana (DAFIS/UTFPR), Curitiba, PR (Brazil). Dept. Academico de Fisica

    2010-07-01

    Several materials with densities close to water are used as phantoms in dosimetry. Such materials are damaged because they are exposed to radiation, the surface layers suffer the largest changes. This damage can be assessed by instrumented indentation. This paper investigates the variations in hardness and elastic modulus of samples of polymethyl-methacrylate, polyvinyl chloride, polyacetal and polypropylene before and after being irradiated with gamma radiation dose 500 Gy, using a Nanoindeter XP, with applied loads between 1 mN and 400 mN. The results are discussed correlating the variations in the mechanical properties of polymers with their applications. (author)

  2. Enzymes evaluation for the polymeric filter cake removal; Avaliacao de enzimas para remocao de reboco formado por fluidos polimericos de base agua

    Energy Technology Data Exchange (ETDEWEB)

    Kameda, Etel; Coelho, Maria Alice Z. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Langone, Marta A.P. [Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil). Inst. de Quimica; Queiroz Neto, Joao C. de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2004-07-01

    In the drilling wells in horizontal or complex configurations, the drilling fluid contact with the productive zone can reduce the productivity by fluid invasion in the borehole wall. Drilling fluids usually comprise natural polymers as starch and xanthan gum. These polymers are deposited as the filter-cake on the wellbore wall. A common approach to remove this filter-cake is the application of acids or strong oxidative solutions. However, these are non-specific species which will react with any encountered that is acid soluble or oxidizable. An alternative is the use of enzymatic preparations that are able to hydrolyze such polymers. The enzymes catalyze only certain specific substrates, are inherently environmentally friendly, the enzymatic degradation rate is slower than that achieved by the oxidative species, so the enzymes produces an uniform filter cake degradation. In this work, the kinetic behaviors of an enzymatic filter-cake breaker and a commercial thermo stable enzymatic complex were analyzed. Both kinetic profiles were very similar, as well as its electrophoresis analysis. The protein in each product showed identical molecular weight. The commercial enzymatic complex stability remained 58.56% of enzymatic activity after 30 days at 40 deg C. Stability at wellbore conditions can be considered similar for both products. At 65 deg C they showed the same enzymatic activity after 8 hours. After 3 hours at 80 deg C, the commercial enzymatic complex remained 29.89% of the initial activity and the filter-cake breaker 61.73%, while at 95 deg C remained 4.39% and 11.60% of the initial activity, respectively, after 15 minutes. (author)

  3. Contribuição ao estudo da estmativa do tempo decorrido de morte por meio da dosagem de ions "Mg++", "K+", Na+", "Ca", "P" e eletrolito "U" no humor vitreo de coelhos

    OpenAIRE

    Paulo Cesar Gaiotto

    2003-01-01

    Resumo: A determinação da cronologia da morte (cronotanatognose) é ainda hoje matéria controversa e intrigante, tendo-se em vista a inexistência de um único método que determine com precisão. Após a morte celular, dá-se início ao processo denominado de autólise, neste todas as células apresentam dissolução de sua integridade química física e morfológica, procedendo-se à difusão de íons de acordo com os seus gradientes de concentração nos diferentes tecidos corpóreos, fatores anatômicos locais...

  4. Synthesis of yttria-doped zirconia anodes and calcium-doped ceria electrolyte to fuel cell; Sintese de anodos de zirconia dopada com itria e eletrolito de ceria dopada com calcia para celulas a combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, G.R.S de; Fagury Neto, E.; Rabelo, A.A., E-mail: grs_gustavo@hotmail.co [Universidade Federal do Para (UFPA), Maraba, PA (Brazil). Fac. de Engenharia de Materiais

    2010-07-01

    From the pursuit of lower operating temperature of fuel cells solid oxide was used polymeric precursor for the synthesis of reactive powder compositions Zr{sub 0,92}Y{sub 0,08}O{sub 2} for the anode and Ce{sub 0,88}Ca{sub 0,12}O{sub 2} for the electrolyte. The solutions were prepared using the metal in much of the composition and citric acid molar ratio of 1:3, under stirring at 60 deg C/1 h. The mixture of metallic citrates was subjected to agitation at a temperature of 80 deg C which was added ethylene glycol in the ratio 60:40 by weight citric acid / ethylene glycol, to form a resin that was pre-calcined at 300 deg C/3 h for to form the expanded resin. The powders were disaggregated in a mortar, screened and calcined at 400, 600 and 800 deg C/2 h. The powders were characterized by standard X-ray diffraction. (author)

  5. Electrodes for the hydrogen through water electrolysis using BMI.BF{sub 4} as electrolyte; Eletrodos para a producao de hidrogenio via eletrolise da agua utilizando BMI.BF{sub 4} como eletrolito

    Energy Technology Data Exchange (ETDEWEB)

    Botton, Janine Padilha; Martini, Emilse M.A.; Souza, Michele Oberson de; Souza, Roberto Fernando de [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Inst. de Quimica. Lab. de Eletroquimica e Catalise]. E-mail: janine@iq.ufrgs.br; Loget, Gabriel [Universite de Rennes 1, Rennes (France). Lab. de Eletroquimica Molecular e Macromolecular. UMR CNRS 6510

    2008-07-01

    The hydrogen production by water electrolysis was tested with different electrocatalysts (nickel, iron alloys containing nickel, chromium and manganese, and molybdenum) in the ionic liquid electrolyte, 1-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF{sub 4}), 10 vol.% in water. The hydrogen evolution reaction (HER) worked at room temperature with a platinum quasi-reference electrode (PtQRE) applying a -1.7 V potential. The experimental conditions used were determined in previous work and such parameters of operation were confirmed with the electrocatalysts employed in this work. A Hoffman cell apparatus was used to perform the water electrolysis. The current density values, j, obtained were between 3.0 mA cm{sup -2} and 77.5 mA cm{sup -2}. The system efficiency was very high for all electrocatalysts tested, between 97.0% and 99.2%. The molybdenum (Mo) electrode was better than others showing the highest current density value in HER. This behavior has been explained by the lower value of activation energy for the electrolysis reaction when Mo is employed comparing with Pt electrode. The energy activation of the HER using platinum (Pt) as electrocatalyst in an aqueous solution of BMI.BF{sub 4} 10 vol.% was 23.40 kJ mol{sup -1}, whereas with electrode of Mo in the same conditions , was 9.22 kJ mol{sup -1}. In an alkaline aqueous electrolyte (usual medium for such reaction), Mo is less efficient than Pt explaining the lack of published citation using pure Mo as cathode for the HER. The excellent results obtained with a Mo electrode employing ionic liquid as electrolyte show that the hydrogen production can be carried out with cheap electrode material at room temperature, which makes this method economically attractive. (author)

  6. Perovskites synthesis for solid oxide fuel cells; Sintese de perovsquitas para celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Sibelle F.C.X.; Melo, Dulce M.A.; Pimentel, Patricia M.; Melo, Marcus A. Freitas; Martinelli, Daniele M.H. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Quimica]. E-mail: sibelle.cunha@gmail

    2008-07-01

    This work aims to study on the obtaining powders of lanthanum manganite oxides with partial substitution of La with strontium at 20% for the application as a cathode for solid oxide fuel cell, through a route of synthesis that are similar to the Pechini method, in which gelatin replaces the ethylene glycol as polymerization agent. The method highlights itself due to its simplicity, low cost and capability to obtain crystalline powders with the high purity and good stoichiometric control. The perovskite obtained were characterized by thermogravimetric analysis, X ray diffraction, electronic scanning microscopy and the superficial area by BET method. The deposition of the perovskite on electrolyte/anode system was done through the spin coating technique. The methodology used for the perovskite synthesis was very efficient, considering a monophasic material was obtained and with characteristics that were proper to the application as electrode to solid oxide fuel cells. (author)

  7. Pedagogia de la Participacion: Entering Elena Garro's "Un hogar solido" through the Body. Enacting Death and Politics in Mexico

    Science.gov (United States)

    Misemer, Sarah M.

    2009-01-01

    Garro's one-act play offers an unusual combination of corpses and animate actors on stage thus combining life and death in the same body. Garro's piece presents students with an approach to "embodying" Mexican culture and its notions of death. The fusion of death and cultural practices in Mexico is a crucial part of the ongoing project for…

  8. Transfer Stations for urban solid wastes. Design; Transferencia ferroviaria de residuos solidos domiciliarios. Alternativas para el diseno

    Energy Technology Data Exchange (ETDEWEB)

    Dussuel Jurado, E.

    2004-07-01

    On the basis of experience in the design of projects promoted by Spanish companies for Transfer Stations for Solid Domestic Waste (RSD) using the railway, aspects regarding location, technological alternatives, restrictions and dimensions are considered. The equipment necessary for the different options is described. The paper is concerned with the Metropolitan Area of Santiago (Chile) and comments on and discusses the regulatory restrictions laid down by the PRMS (Metropolitan Regulatory Plan for Santiago) affecting decisions on location, dimensions and design. Last of all, the costs of Transfer Stations are analysed depending on the distance from the sanitary landfill nd in comparison with the alternative by road, laying down convenience kerbs. Also analysed are the environmental advantages of the railway option as opposed to roads. (Author)

  9. Characterization of products of combustion of mineral coal; Caracterizacao de produtos solidos da combustao do carvao mineral

    Energy Technology Data Exchange (ETDEWEB)

    Pinheiro, H.S.; Albuquerque, J. S. V.; Sales, J.C.; Nogueira, R.E.F.Q., E-mail: hs.pinheiro@metalmat.ufc.br [Universidade Federal do Ceara (UFCE), Fortaleza, CE (Brazil). Centro de Tecnologia. Departamento de Engenharia Metalurgica e de Materiais

    2011-07-01

    During the burning of coal in power plants, various types of waste or by products are generated. These materials have been the subject of several studies. They contain ashes and have many technological applications, such as in the production of various types of ceramic pieces. The objective of this work was to study the feasibility of adding the coal combustion products as filler for ceramics. X-ray fluorescence analysis was used to identify and quantify the proportions of the elements contained in the sample and x-ray diffraction to identify the phases present. The analysis by X-ray diffraction revealed a diffraction pattern of silicon sulfide, calcium silicate and sulfide phases of Aluminium, Potassium and Titanium. X-ray fluorescence analysis showed silica (37.14%), calcium (21.86%), aluminum (14.69%) and sulfur (8.70%). These results show characteristics of materials with potential for incorporation in ceramic bodies, provided that some processing is done to eliminate the sulfur. (author)

  10. Characterization and morphology of solids suspended in rain water; Caracterizacion y morfologia de solidos suspendidos en agua de lluvia

    Energy Technology Data Exchange (ETDEWEB)

    Iturbe G, J.L.; Lopez M, B.E.; Torre O, J. De la [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, Mexico D.F. (Mexico)

    2000-07-01

    This work presents the results obtained from the analysis of rain water in Mexico. The study treats over the characterization and morphology of the solids suspended in form of particles in the atmosphere. The solids suspended were obtained of the pluvial precipitations after these have been centrifuged. Subsequently of the separation, the particulate matter was analysed by Sem and X-ray dispersive energy.

  11. Hyperbranched polymers from polymerization in solid state;Polimeros hiper ramificadas a partir de polimerizacao em estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Tomaz, Vivian A.; Silva, Rafael; Muniz, Edvani C.; Rubira, Adley F., E-mail: afrubira@uem.b [Universidade Estadual de Maringa (UEM), PR (Brazil)

    2009-07-01

    The macroscopic properties of polymers are directly related to the chemical characteristics of the monomeric units and also with the geometric arrangement of polymer chains. Thus, polymers were synthesized from two well-known chelators EDTA and EDA. We evaluated the conditions for the polymerization of the precursors in the solid state. The polymerization was carried out varying the proportions of reagents, aiming the polymers with different degrees of chain branching and the materials were characterized by FTIR. The materials obtained from the best condition for synthesis were purified by size-exclusion chromatography of and were subjected to characterization by FTIR and NMR of {sup 1}H and {sup 13}C. The content of end groups in these samples was determined by back titration. (author)

  12. Treatment of leachates of sanitary landfills of urban solid wastes. Tratamiento de lixiviados de vertederos controlados de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Iza Lopez, J. (Departamento de Ingenieria Quimica y de Medio Ambiente, ETSII, Bilbao (Spain))

    1994-01-01

    The method more used for Urban Solid Wastes is the sanitary landfill. Its management is similar to the industrial process plant. The minimization techniques of wastes are applicated to reduce the environmental impact and to increase the degradation process in order to improve the biogas as alternative energy. This article analyzes the anaerobic digestion, the leachates characterization and treatment of leachates. (Author)

  13. Integral incineration plant of urban solid wastes in Melilla (Spain); Planta integral incineradora de residuos solidos urbanos en Melilla

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz Amoros, F.

    1996-12-01

    Melilla is a city of 6.700 people by Km?. The construction of an integral incineration plant was a necessity. The present article presents the project, design, separation of solid wastes and construction of mentioned plant. (Author)

  14. Energy use of urban solid wastes (USW) in Spain; Aprovechamiento energetico de los residuos solidos urbanos (RSU) en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Carreras, N.; Dorronsoro, J. L. [Ciemat. Madrid (Spain)

    1999-07-01

    The municipal solid wastes (MSW) constitute an important resource to produce electricity. In the case of Spain more than 15 millions tons of the these wastes are generated every year. Besides of the high rate in which they are produced, the fact that they are continuously generated and concentrated in specific areas increases in a great measure their value for energetic uses. Electric energy can be obtained from the MSW by means of microbiological biogas or thermal transformations. At the present time, the electric energy from MSW produced in our country comes from the biogas generated in landfill sites as well as from the incineration of these residues. The present work shows the location and characteristics of the plants that produce electric energy from the MSW in Spain. (Author)

  15. Composition of municipal solid wastes in Vigo (Spain). La composicion de los residuos solidos urbanos de Vigo

    Energy Technology Data Exchange (ETDEWEB)

    Otero Couto, D. (Departamento de Medio Ambiente, Universidad de Vigo, Vigo (Spain))

    1994-01-01

    Fermentable and Paper are the main components in municipal solid waste from Vigo. Paper is the main components when results are reported on dry weigh and Fermentables when are on wet weigh. The composition of plastic, paper and metal in municipal solid waste have a clear scarification in the city of Vigo. City center is characterized mainly by plastic films and paper coming from grafic applications and packaging. In rural and suburban areas plastic from bottles and paper coming from hygienic applications dominate. Metal composition is homogeneous along the city. (Author)

  16. Composting of municipal solid wastes in Jujuy (Argentina); Compostaje de residuos solidos urbanos en la provincia de Jujuy, Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Santos Romero, E. E.; Boccardo, R.; Kosir, A.; Altamirano, F.; Figliolo, C.; Arias, P.; Aguado, R.; Zankar, G. [Universidad de Jujuy. Argentina (Argentina); Gonzalez Carcedo, S. [Universidad de Burgos (Spain)

    1999-11-01

    The results from a first experience of composting of urban solid waste in Jujuy (Argentine) were shown. The organic part of a solid waste collected from the city San Salvador, was composted during 3 months experience in windrow piles and physico-chemical properties were monitored. The time of composting was diminished by the application of an aqueous aminoacid solution. (Author) 10 refs.

  17. Characterization of urban solid wastes in Terrassa (Spain); Caracterizacion de los residuos solidos urbanos del municipio de Terrasa

    Energy Technology Data Exchange (ETDEWEB)

    Sanz, R.; Alvarez, D.; Forme, C.; Puig, M. D. [Universidad Politecnica de Catalunya (Spain)

    1999-11-01

    The aim of the study we carried out is to establish the basis to develop an integral management plan or urban solid waste of Terrasa, Specifically, it wants to build up rational future plants of selection and treatment and to choose a more suitable selective collect. For this reason, we collected urban solid wastes samples directly from the rubbish skips, without warning the population. We could observe a good function of the White Point for the first year. However, the population did not take part highly in the selective collect of the paper-cardboard and glass, because we found a big quantity of these two materials in the domestic rubbish. (Author) 6 refs.

  18. Development of solid oxide fuel cells (SOFC); Desenvolvimento de celulas a combustivel do tipo oxido solido (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Souza, F.M.B. de; Carvalho, L.F.V. de; Alencar, M.G de; Boaventura, J.S. [Universidade Federal da Bahia (DFQ/UFBA), Salvador, BA (Brazil). Dept de Fisico-Quimica. Grupo de energia e Ciencias dos Materiais], e-mail: bventura@ufba.br

    2008-07-01

    The most promising technology for generating electric power, with reduced environmental impact, is the fuel cell. This technology is virtually non-polluting and the fuel supplies can be renewable. Therefore is necessary to study the technique of preparing the entire anode / electrolyte / cathode to optimize its operation. There are still major challenges to making the SOFC economically viable. The key is the improvement of manufacturing of its components and use of materials that can simultaneously reduce costs and reduce the temperature of operation. Among the properties of the cell, was shown the dependence of the efficiency of the device on the properties of the electrolyte, particularly its thickness. The mixture of YSZ with GDC in the composition of the anode and electrolyte aims to obtain a material with greater ionic conductivity. After sintering the cell was characterized by scanning electron microscopy (SEM). (author)

  19. Graphite-moderated and heavy water-moderated spectral shift controlled reactors; Reactores de moderador solido controlados por desplazamiento espectral

    Energy Technology Data Exchange (ETDEWEB)

    Alcala Ruiz, F.

    1984-07-01

    It has been studied the physical mechanisms related with the spectral shift control method and their general positive effects on economical and non-proliferant aspects (extension of the fuel cycle length and low proliferation index). This methods has been extended to non-hydrogenous fuel cells of high moderator/fuel ratio: heavy water cells have been con- trolled by graphite rods graphite-moderated and gas-cooled cells have been controlled by berylium rods and graphite-moderated and water-cooled cells have been controlled by a changing mixture of heavy and light water. It has been carried out neutron and thermal analysis on a pre design of these types of fuel cells. We have studied its neutron optimization and their fuel cycles, temperature coefficients and proliferation indices. Finally, we have carried out a comparative analysis of the fuel cycles of conventionally controlled PWRs and graphite-moderated, water-cooled and spectral shift controlled reactors. (Author) 71 refs.

  20. Estudio comparativo de tecnologías comerciales de valorización de residuos solidos urbanos

    OpenAIRE

    Cortázar Dueñas, María

    2015-01-01

    Debido al incremento en la demand a de combustibles, y al consiguiente aumento en el precio del petróleo, se plantea el uso de la biomasa como sustituto de los combustibles fósiles. La biomasa está considerada como una fuente de energía renovable y c ada vez s e está apostando más por su uso ya que contribuye a la reducción de l CO 2 de la atmó sfera. Como la biomasa proviene de fuentes naturales, se supone que todo el CO 2 que...

  1. Glassceramics frits attainment from industrial solid wastes; Obtencao de fritas vitroceramicas a partir de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Matheus Chianca

    2006-07-01

    This work studies the residue obtained from the process of aluminum metal extraction activities, a great interest process, because of Brazil own some of the biggest bauxite mineral reserves in all the world. As a useful choice for no residue generation, and a support for environmentally friendly technologies, this work studies the white dross residue (WDR), from the process of aluminum metal reduction by thermal plasma. The phase equilibrium diagram of Al{sub 2}O{sub 3}-Ca O-SiO{sub 2} system was used to calculate the compositions. The WDR were incorporated in a ceramic product without modifying its principal characteristics. The fusion and devitrification treatments were studied. XRD (X-ray diffractometry), SEM (scanning electron microscopy) and FTIR (transformed Fourier infrared) were used to investigate the glass and glassceramic samples. These techniques showed that is possible to get glassceramic with up to 30 mass% of WDR after molten at 1300 deg C and annealed at 900 deg C. In addition, the WDR showed to be a promising material in attainment of crystalline phases in less times of heat treatment for annealing. (author)

  2. Lamination technology for separation of solid wastes; La tecnologia de la Laminacion para separacion de residuos solidos compuestos

    Energy Technology Data Exchange (ETDEWEB)

    Rocas, J.

    1998-07-01

    The lamination technology has been developed, and introduces a form of separation of solid wastes totally new in its concept and development. No longer will be a problem the economic and ecological efficient separation of wastes like tetra-brick, compound of metals and plastics, aluminum scum, electric or electronic wastes and many other. (Author)

  3. Study of accelerated aging of polymeric surge arresters and insulators used in high voltage lines; Estudo sobre o envelhecimento acelerado de para-raios e isoladores polimericos usados em linhas de alta tensao

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira Junior, Joao B. de; Castro Junior, Joao B. de; Silva, Maria Elisa S.R. e; Freitas, Roberto F.S.; Sousa, Ricardo G. de [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Quimica. Lab. Ciencia e Tecnologia de Polimeros; Souza, Breno P.G. de [CEMIG Distribuicao S.A., Belo Horizonte, MG (Brazil)], e-mail: sousarg@ufmg.br

    2011-07-01

    The use of polymeric materials in the electrical system has dramatically increased in recent years, in quantity as well as in quality. However, the use of these materials has been very empirical, being necessary a more directed and well based study towards their application in energy sector, especially concerning their early deterioration. In this study, the behavior of some surge arresters and insulators, used in power lines, after suffering aging artificial weathering chamber, was investigated. The absorption spectra in the infrared (FTIR) was used as analytical technique for study of aging. Of the five samples tested, only one showed an oxidation process after 1500 hours of artificial weathering. (author)

  4. Chemical modification of HTPB for application as polymeric additives for diesel fuel. 1 - phenyl ethers; Modificacao quimicado PBLH para aplicacao como aditivos polimericos para oleo diesel. 1. eteres fenilicos

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Agne R.; Prezibella, Alysson M.; Ferraz, Fernando A.; Soldi, Rafael A.; Oliveira, Angelo R.S.; Cesar-Oliveira, Maria Aparecida F. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Lab. de Polimeros Sinteticos

    2007-07-01

    The petroleum industry faces several problems related to the crystallization of paraffins, in petroleum and its derivatives, with the reduction of the service temperature. To solve this problem polymeric additives are used, of which the esters have been enough studied in several areas of the world, except in Brazil. In this work, this class of pour point depressant additives it was obtained through the chemical modification of Hydroxyl Terminate Polybutadiene (HTPB) that present a hydrocarbon chemical structure containing one double bound in each repetitive unit and hydroxyl groups of the primary and secondary allylic types - functional groups potentially reactive. The obtained products were characterized by Fourier transformed infrared spectroscopy and nuclear magnetic resonance, and they are being tested as additive for the pour point reduction of a diesel oil samples (REPAR-PETROBRAS). (author)

  5. Synthesis of polymeric materials and their use as wax deposition inhibitors of crude oil and its medium distillates; Sintese de materiais polimericos para serem utilizados como inibidores de deposicao de parafinas em petroleo e em seus destilados medios

    Energy Technology Data Exchange (ETDEWEB)

    Mansur, Claudia R.E.; Passos, Leonardo B.; Lucas, Elizabete F. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas]. E-mails: celias@ima.ufrj.br, elucas@ima.ufrj.br; Gonzalez, Gaspar; Alvarez, Dellyo [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas]. E-mails: gaspar@cenpes.petrobras.com.br; dellyo@cenpes.petrobras.com.br

    2003-07-01

    This work aims at the development of polymeric materials to be employed as organic deposition inhibitors - ODI's for petroleum and middle distillate of petroleum, such as lube oils. The additives were obtained by chemical modifications involving esterification reactions of commercial ethylene-co-vinyl acetate (EVA) copolymers and poly(vinyl alcohol) (PVA) with long chain organic acid chlorides. The materials efficiency was tested by pour point measurements of the model system containing commercial paraffin. Data show that chemically modified copolymers had a reasonable performance as pour point reducing agents of the model system used. Moreover, the products were also tested as lube oil additives, and the results showed that the chemically modified copolymers presented a more pronounced influence on the paraffin crystallization process than the non-modified EVA commercial sample. (author)

  6. Study and development of methodology for radioactive iodine fixation in polymeric substrate for manufacturing sources used in brachytherapy; Estudo e desenvolvimento de metodologia para fixacao de iodo radioativo em substrato polimerico para confeccao de fontes utilizadas em braquiterapia

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Bruna T.; Souza, Carla D.; Benega, Marcos A.G. and others, E-mail: bteigarodrigues@gmail.com, E-mail: carladdsouza@yahoo.com.br, E-mail: marcosagbenega@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Tecnologia das Radiacoes

    2014-07-01

    According global estimates of Globocan 2012 project of the International Agency for Research of Cancer, of the World Health Organization, there were 14,1 million new cases of cancer and a total of 8,2 million deaths from cancer. Also show that in 2030, the overall load will be 21,4 million new cases and 13,2 million cancer deaths. One of the prostate cancer therapy is brachytherapy, used in early and middle stages of the disease. It is made with the introduction of seeds with radioactive material within the tumor or in nearby regions, affecting the minimum surrounding tissues. The aim of this work is the study and developing the deposition of radioactive iodine on the polymeric substrate method, and an analysis relating the efficiency of the method to implementation in the laboratory of brachytherapy from IPEN. Iodine-125 is adsorbed on an epoxy resin solution. The objective of this study is to offer a new proposal for seeds. The results will give the data for the radiation protection and the procedures for radioactive waste management.

  7. Characterization of dental cement obtained from a glass prepared by the polymeric precursor method; Caracterizacao de cimento odontologico obtido a partir de um vidro preparado pelo metodo dos precursores polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Bertolini, Marcio Jose; Zaghete, Maria Aparecida; Gimenes, Rossano; Paiva-Santos, Carlos de Oliveira [UNESP, Araraquara, SP (Brazil). Inst. de Quimica]. E-mail: marciobert@yahoo.com.br; Palma-Dibb, Regina Guenka [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Odontologia

    2005-09-15

    Glass ionomer cements are glass and polymer composite materials. These materials currently find use in dentistry. The purpose of this work is to obtain glass powders based on the composition 4.5SiO{sub 2} - 3Al{sub 2}O{sub 3} - 2CaO to be used in dentistry. The powders were prepared by a chemical route at 700 deg C. The properties of glass ionomer cements obtained from powders prepared at 700 deg C were studied. Diametral tensile strength and microhardness were evaluated for the experimental glass ionomer cements and a commercial material. It was concluded that the properties of experimental cements were similar to those of the commercial ones. (author)

  8. National Nanotechnology Laboratory (LNNano) open facilities for scientific community: new methods for polymeric materials characterization; Instalacoes abertas a comunidade cientifica no Laboratorio Nacional de Nanotecnologia (LNNano): novos metodos de caracterizacao de materiais polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Cristiane A.; Santos, Ramon H.Z. dos; Bernardes, Juliana S.; Gouveia, Rubia F., E-mail: rubia.gouveia@lnnano.cnpem.br [Centro Nacional de Pesquisa em Energia e Materiais (LNNano/CNPEM), Campinas, SP (Brazil). Laboratorio Nacional de Nanotecnologia

    2015-07-01

    National Nanotechnology Laboratory (LNNano) at the National Center for Energy and Materials (CNPEM) presents open facilities for scientific public in some areas. In this work will be discussed the facilities for mainly the polymeric community, as well as new methods for the characterization. Low density polyethylene (LDPE) surfaces were characterized by X-ray microtomography and X-ray photoelectron spectroscopy (XPS). The results obtained by microtomography have shown that these surfaces present different contrasts when compared with the bulk. These differences are correlated with the formation of an oxidized layer at the polymer surface, which consequently have a greater X-ray attenuation. This hypothesis is confirmed by XPS, which shows LDPE surface layers are richer in carbonyl, carboxyl and vinyl groups than the bulk. This work presents that microtomography can be used as a new method for detection and characterization of polymer surface oxidation. (author)

  9. Evaluation of polymeric materials packed in fixed bed column for oil water remediation; Avaliacao de materiais polimericos empacotados em colunas de leito fixo para a remediacao de aguas oleosas

    Energy Technology Data Exchange (ETDEWEB)

    Queiros, Yure G.C.; Barros, Cintia Chagas; Oliveira, Roberta S.; Marques, Luiz R.S.; Cunha, Luciana; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Macromoleculas Eloisa Mano], e-mail: yuregomes@ima.ufrj.br, e-mail: elucas@ima.ufrj.br

    2007-07-01

    Polymeric resins are being tried as an alternative material for treating oily waters from the petroleum industry, which have already been treated by conventional methods. The objective of this work has been to evaluate the purification degree of synthetic oily waters when treated in fixed bed columns packed with polymeric resins made up of hydrophilic and lipophilic moieties. The analysis used for characterizing the total grease and oil content (TOG) was fluorimetry. Starting oily waters of average TOG 50 ppm were prepared. Data obtained from eluted waters did not outweigh 10% of the TOG values of starting solutions in some blends of resins with a pretty good mechanical stability under the increase of pressure. Organoclay material showed a good retention performance, but has presented a mechanical instability too, compromising its use for larger amounts of wastewater. (author)

  10. The polymer cement of sulfur as an alternative for the recycling of phosphogypsum. Corrosion testing of cements enriched with phosphogypsum; El cemento polimerico de azufre como alternative para el reciclado de fosfoyesos. Pruebas de corrosion de cementos enriquecidos con fosfoyesos

    Energy Technology Data Exchange (ETDEWEB)

    Gasco, C.; Lopez, F. A.; Navarro, N.; Sanchez, M.; Sanz, B.; Ballesteros, O.; Higueras, E.; Roman, C. P.

    2011-07-01

    The possibility of the use of cement for the recycling of materials is seen today as sustainable solution of the fertilizer industry for production of matches (NORM). In this paper presents some results of corrosion tests performed on these cements modified using buffer solutions of different pH. The analytical determinations in these matrices are new challenges. (Author)

  11. Synthesis and characterization of SnO2 doped with fluorine by the technique of polymeric precursors; Sintese e caracterizacao de SnO2 dopado com fluor pela tecnica dos precursores polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Gilberto J.; Lopes, Rafael Ialago, E-mail: gilbertop@fei.edu.br [Centro Universitario FEI, Sao Bernardo do Campo, SP (Brazil). Departamento de Engenharia de Materiais

    2016-07-01

    The present work deals with the synthesis of tin dioxide powders doped with fluorine and chlorine anions to evaluate the influence of these on the physico-chemical properties of SnO2, as well as to verify if the dopant does not make a solid solution with the material and its possible use as sintering additive. The samples were synthesized by Pechini method (polymer precursors) with tin oxalate as a source not contaminated with chlorine of this metal. Specific surface area characterization (BET method) and X-ray diffractometry (XRD) show that doping reduces the particle size of SnO2, being more effective at lower dopant levels. The dilatometry of the doped powders shows a reduction in the beginning and end temperatures of the sintering of the tin dioxide when compared with values in the literature.

  12. Evaluation of the in vitro biocompatibility of polymeric materials for the regeneration of cutaneous tissue; Evaluacion de la biocompatibilidad in vitro de materiales polimericos para la regeneracion de tejido cutaneo

    Energy Technology Data Exchange (ETDEWEB)

    Escudero Castellanos, A.

    2016-07-01

    The problems associated with medical cases of functional tissue loss or organ failure are destructive and expensive, even more frequent than could be perceived, sometime if not properly treated, even deathly. Tissue engineering is an interdisciplinary field that emerged to address these clinical problems, it is based on researching and development of biomaterials that have evolved along with areas such as cell biology, molecular and materials science and engineering. Today, the technique is based on seeding cells onto prefabricated scaffold biomaterials, like the hydrogels, that are three-dimensional networks with hydrophilic properties. These materials are characterized as being porous and sticky, favoring the support for the proliferation of certain cells in order to lead the regeneration of injured tissue. As a prerequisite for the use of materials in tissue engineering is testing biocompatibility which is the ability of the bio material to allow contact with any tissue, existing a favorable host response, accepting it as their own and restoring previously lost function. The first step for evaluating biocompatibility is to perform the in vitro assays. These assays have been demonstrated more reproducibility and predictability than in vivo assays, therefore the in vitro assays are used to produce high quality scaffolds and testing on animals as less as possible. This test is essential to establish the benefits and limitations of biomaterials tested in order to improve the scaffolds. This work will focus on assessing the biocompatibility of three polymeric materials with potential use in tissue engineering by means of cytological compatibility tests and hemo compatibility tests. Furthermore, disinfection techniques and gamma sterilization were evaluated to produce sterile materials that can be used in tissue engineering. (Author)

  13. Effect of the calcining temperature on the porosity of the titanium dioxide powders obtained by Polymeric Precursor Method; Efeito da temperatura de calcinacao na porosidade de pos de dioxido de titanio obtidos pelo Metodo dos Precursores Polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, D.W.; Granado, S.R.; Ciola, R.A.; Cavalheiro, A.A., E-mail: douglas_levis@hotmail.com [Universidade Estadual de Mato Grosso do Sul (CPTREN/UEMS), Navirai, MS (Brazil). Centro de Pesquisas Tecnologicas em Recursos Naturais

    2011-07-01

    Ceramics materials obtained by Polymeric Precursor Method exhibit mechanisms of the pore formation and elimination dependents on the decomposition kinetics of the residual organic matter of the polyester. The mechanism of pore elimination seems to occur by disrupting of the wall among the pores because it leads to the consequent pore coalescence and increasing in pore volume, which posses higher pore diameters. In this case, it was observed that the porosity decreasing occurs by pore wall moving after that the residual organic matter is eliminated from the pore inside. The pore diameter associated to the highest volume desorption occurred for the material obtained after calcining at 450°C is approximately 1,7 nm, what seems to be related to the amorphous carbon accumulated inside the pores, once that the pore volume decreases more effectively for the material obtained by calcining at 550°C, making the maximum volume situates at 2,0 nm. (author)

  14. Polymeric biocomposites obtained from the amylacea and lignocellulose fraction of the mango core (Mangifera indica), Tommy Atkins; Biocompositos polimericos obtidos a partir da fracao lignocelulosica e amilacea do caroco de manga (Mangifera indica), Tommy Atkins

    Energy Technology Data Exchange (ETDEWEB)

    Cordeiro, Edna Maria Silva

    2013-07-01

    This employment has the function the utilization of mango seeds Tommy Atkins, like starch source to obtain biopolymers and fibers source and nanowhiskers cellulose also, that will be use like reinforcing fillers in micro and nano biocomposites polymeric. The fibers in natura removed from tegument mango seed were characterized, as well as the treated fibers and nanowhiskers of cellulose extracted from them. The starch extract showed a good performance (32%) and a high purity. The chemicals analyzes, of crystallinity and morphological of the fibers in natura, treated fibers and nanowhiskers of cellulose confirmed the efficacy of the chemical treatment performed to remove amorphous constituents (hemicellulose and lignina). The thermoplastic starch (TPS) obtained from two sources, corn starch and starchy material mango, was produced in a twin screw extruder with composition mass of 62,5% of starch, 9,4% of water and 28,1% of glycerol. The starch material mango was the main objective of this work for the production of biodegradable materials, and the starch corn was utilized during the production stage to evaluate the processability of the starch and use as parameter for comparison, according of being a conventional source for obtaining conventional commercial starch. The incorporation of fibers (6% in mass) and nanowhiskers cellulose (1% in mass) in matrix of TPS to obtain composite and nanocomposite, respectively, it was performed in single screw extruder. The biocomposites and bionanocomposites polymeric were obtained and the TPS from starchy material mango presented better results of thermal and mechanicals properties when compared to TPS corn starch. Concludes that the sediment generated of the agroindustrial processing mango used presents potential to producing of biodegradable materials. (author)

  15. Palm oil based polymer materials obtained by romp: study by low field NMR; Materiais polimericos obtidos via ROMP a partir de oleo de palma: estudo por RMN de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Henrique; Lima-Neto, Benedito S., E-mail: benedito@iqsc.usp.br [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Quimica de; Azevedo, Eduardo R. de [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Fisica

    2013-07-01

    Aiming to study and develop new materials synthesized from sustainable sources, several polymers were prepared using in its monomeric composition, different amounts of NPO (Norbornenyl Palm Oil) monomer. This monomer was developed based on a vegetable oil rather produced in northern Brazil, the Palm Oil. Since this oil have a low content of unsaturation, its use in developing new monomer for ROMP (Ring-Opening Metathesis Polymerization) is not exploited. In this regard, polymeric materials were obtained using the NOP and both the reaction process and the resulting products were analyzed by Nuclear Magnetic Resonance in the time domain (TD-NMR) at low magnetic field. (author)

  16. TiO{sub 2} synthesized by the method of polymeric precursor (Pechini): structure of the intermediate resine; TiO{sub 2} sintetizado por el metodo de precursor polimerico (Pechini): estructura de la resina intermedia

    Energy Technology Data Exchange (ETDEWEB)

    Vargas, M. A.; Granco, Y.; Ochoa, Y.; Ortegon, Y.; Rodriguez Paez, J. E.

    2011-07-01

    In this work, the polymeric precursor method (Pechini method) was used to synthesize titanium dioxide. This process allowed a bigger control on the purity of the oxide and the crystalline phase present in the material. In this case, the principal phase was anatase. The resine obtained in this process was characterized using NMR and IR spectroscopy to determine their structure. With this information we proposed a resine structure model. To finish the process, the resin was thermally treated to obtain TiO{sub 2}. This oxide was characterized using different techniques: ray-X diffraction (RDX) and electron microscopy (TEM and SEM). The results indicated that the TiO{sub 2} anatase phase can be obtained at 450 degree centigrade with a particle size <100nm. (Author) 10 refs.

  17. Evaluation of the physicochemical properties of structured materials: metallic, polymeric and ceramic, for the treatment of sour gases; Evaluacion de las propiedades fisicoquimicas de materiales estructurados: metalico, polimerico y ceramico, para el tratamiento de gases acidos

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, A.; Chavez, R. H. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Olea, O.; Solis, D., E-mail: rosahilda.chavez@inin.gob.mx [Universidad Autonoma del Estado de Mexico, Facultad de Quimica, Cerro de Coatepec s/n, Ciudad Universitaria, 50100 Toluca, Estado de Mexico (Mexico)

    2013-07-01

    in this work the physicochemical properties of three structured materials: metallic, polymeric and ceramic, from Sulzer Brothers Limited brand, are studied in order to removal sour gases, by absorption process, in aqueous solution of Monoethanolamine (Mea), at 30% weight. Mechanical properties, chemical composition, morphology and corrosion resistance were determined, using different characterization techniques, such as: 1) mechanically, according to standard procedures Astm E-384-1990, 2) chemically, by the corrosion resistance in the presence of an electrochemical cell, in aqueous solution of H{sub 2}SO{sub 4}, 1 N by Astm G-5-1999, 3) morphologically by scanning electron microscopy technique, and 4) efficiency of separation, by the gas chromatography technique in order to determine the chemical absorption of CO{sub 2} by Mea. The ceramic material was the hardest with 700 Hk value and tensile strength of 90 MPa, likewise showed resistance to corrosion of 10.28 m py, separation efficiency of 74% CO{sub 2}, at 10 minutes. The metallic material had a hardness of 190 Hk and it was the most resistant of tension, with 831 MPa, and corrosion resistance of 780.4 x 10{sup -6} m py, likewise promoted CO{sub 2} separation efficiency of 90% during the evaluation. The polymeric material presented hardness of 20 Hk and 35 MPa and it was not suffered surface change with electrochemical attack, with 282.4 x 10{sup -6} m py, and separation efficiency of 88%. Therefore the polymer was the most ductile, with smooth surface and greater resistance with H{sub 2}SO{sub 4}. The metal material was more resistant to plastic deformation and more corrugated surface and the second resistance in the presence of acid medium in aqueous solutions. For all the above, the metallic material is recommended by its greater separation in the reduction of acid gases and the polymer due to its greater chemical resistance. (Author)

  18. Viscoelastic characterization of carbon fiber-epoxy composites by creep and creep rupture tests; Caracterizacao viscoelastica por meio de ensaios de fluencia e ruptura por fluencia de compositos polimericos de matriz de matriz de resina epoxidica e fibra de carbono

    Energy Technology Data Exchange (ETDEWEB)

    Farina, Luis Claudio

    2009-07-01

    One of the main requirements for the use of fiber-reinforced polymer matrix composites in structural applications is the evaluation of their behavior during service life. The warranties of the integrity of these structural components demand a study of the time dependent behavior of these materials due to viscoelastic response of the polymeric matrix and of the countless possibilities of design configurations. In the present study, creep and creep rupture test in stress were performed in specimens of unidirectional carbon fiber-reinforced epoxy composites with fibers orientations of 60 degree and 90 degree, at temperatures of 25 and 70 degree C. The aim is the viscoelastic characterization of the material through the creep curves to some levels of constant tension during periods of 1000 h, the attainment of the creep rupture envelope by the creep rupture curves and the determination of the transition of the linear for non-linear behavior through isochronous curves. In addition, comparisons of creep compliance curves with a viscoelastic behavior prediction model based on Schapery equation were also performed. For the test, a modification was verified in the behavior of the material, regarding the resistance, stiffness and deformation, demonstrating that these properties were affected for the time and tension level, especially in work temperature above the ambient. The prediction model was capable to represent the creep behavior, however the determination of the equations terms should be considered, besides the variation of these with the applied tension and the elapsed time of test. (author)

  19. Study of biocompatible properties of polymeric scaffolds derived from vegetable oils for application in tissue engineering; Estudo das propriedades biocompativeis de arcaboucos polimericos derivados de oleos vegetais para aplicacao na engenharia de tecidos

    Energy Technology Data Exchange (ETDEWEB)

    Baratela, Fernando Jose Costa

    2015-11-01

    Tissue engineering and regenerative medicine have as main objective the morphologic/functional reestablishment of injured tissues and organs using cells, scaffolds, stem cells and control of immunological/biochemical responses promoted by the body. In addition, materials science seeks to develop biocompatible biomaterials that do not promote unwanted immune responses and provide the re-establishment of the functions of the tissue/organ. Polymers of natural origin stand out as biomaterials to resemble biological macromolecules, similarity to the extracellular matrix, reduced chance of inflammation and chronic pacing low or no toxicity. This study aimed the development of macromolecular arrays originated from epoxidized soybean oil (OSE), analyzing the relationship between the chemical structure/biological activity of the macromolecular arrays for use as biomaterials in tissue engineering. The synthesis of OSE was performed through the oil chemical route, whose efficiency was determined by infrared spectroscopy and the reaction yield of 85%, determined by nuclear magnetic resonance spectroscopy. From the analysis by differential scanning calorimetry, it was detected a decrease of the glass transition temperature of the epoxidized soybean oil polymer (POSE) compared with OSE, suggesting an increase of the growth of polymer chains of POSE. Thermogravimetric analysis was performed to define the OSE degradation profile, which degrades in two steps. The POSE degrades in just one step and shows higher thermal stability by the increased molecular interactions. The hydrophilicity and crosslinking of POSE was promoted by the addition of 2-hydroxyethyl methacrylate (HEMA) with the monomer grafting by gamma irradiation. The results showed an increased mechanical stability, gelation and water absorption with the HEMA content increasing. Finally, the degree of crystallinity for such polymers grafted with HEMA was 27.5%, estimated by X-ray diffractometry. The second stage was characterized by (I) developing POSEs with the grafting of HEMA in the proportions OSE / HEMA 90:10 and 65:35 irradiated by gamma rays at doses of 50 and 100kGy, (II) physico-chemical characterization of POSE-HEMA and (III) analysis of biological materials. By infrared spectroscopy, it was detect the epoxidized regions of POSE, as well as the successful grafting of the monomer HEMA concentrations with all radiation doses. By differential scanning calorimetry, the activation energy was calculated (E{sub a}) of the polymers. The crystallinity of the material was defined by X-ray diffraction, showing tendency of amorphous material as well as a small percentage of the increase in crystallinity with increasing intensity of radiation doses during this synthesis and a decrease in crystallinity with the increasing concentration of HEMA. The analysis of the samples did not show cytotoxicity on POSE-HEMA and confirmed the efficiency of polymer washings to remove the processing waste. The analysis of hemocompatibility showed any platelet adhesion and the cell growth on the scaffolds was positive. From the results obtained in this research, we concluded by the potential use of POSE-HEMA in tissue engineering. (author)

  20. Palm oil based polymer materials obtained by ROMP: study by low field NMR; Materiais polimericos obtidos via ROMP a partir de oleo de palma: estudo por RMN de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Henrique; Azevedo, Eduardo R. de; Lima-Neto, Benedito S., E-mail: benedito@iqsc.usp.br [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil)

    2015-07-01

    Aiming to study and develop new materials synthesized from sustainable sources, several polymers were prepared using in its monomeric composition, different amounts of NPO (Norbornenyl Palm Oil) monomer. This monomer was developed based on a vegetable oil rather produced in northern Brazil, the Palm Oil. Since this oil have a low content of unsaturation, its use in developing new monomer for ROMP (Ring-Opening Metathesis Polymerization) is not exploited. In this regard, polymeric materials were obtained using the NOP and both the reaction process and the resulting products were analyzed by Nuclear Magnetic Resonance in the time domain (TD-NMR) at low magnetic field. (author)

  1. Kathy Finds Out about the Introduction of Solids. Mother-to-Mother Support = Josefa Descubre Conocimientos sobre la Introduccion de Solidos. Apoyo Madre a Madre.

    Science.gov (United States)

    Magalhaes, Rebecca; Stone-Jimenez, Maryanne; Allen de Smith, Paulina; Smith, Natalia

    These magazine-sized booklets, one in English, one in Spanish, are in cartoon format and are designed to be used by people with limited literacy in English or Spanish. This booklet explains that exclusive breastfeeding means giving no water, liquids, or food; breast milk contains sufficient water to satisfy the baby's thirst; at about 6 months,…

  2. Studio della risposta di dosimetri a stato solido da utilizzare per la misura dei campi di radiazione nell'esperimento CMS a LHC

    CERN Document Server

    Ravotti, F

    2002-01-01

    In the CMS experiment at the Large Hadron Collider (LHC) intense radiation fields are expected during p-p collisions. To guarantee the correct functioning of CMS for many years, an on-line dosimetric system will be required to check the energy deposed (via ionizing and non-ionizing energy losses) in the detectors during collisions. In the present work, two types of solid-state dosimeters, p+/n/n+ diodes for fluence measurement and RadFETs for absorbed dose measurement, were tested in neutrons, protons, and positive pions beams. The analysis include the study of the response of the devices compared with the field intensities expected in CMS, as well as the study of different instabilities that could affect the measure of the absorbed dose for RadFETs dosimeters only.

  3. Temperature and final characteristics of composting process of the Municipal solid wastes; Evolucion de la temperatura y caracteristicas finales del co-compostaje de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Porcel, O.; Leon, J.J. de; Revilla, J.; Dobao, M.M.; Ruiz, J.L. [Departamento de Quimica Agricola y Edafologia, Universidad de Cordoba, cordoba (Spain)

    1996-06-01

    In this paper it has been studied the evolution of temperature in two depth of three piles during the composting process using the organic matter of the Municipal Solid Waste from Cordoba (Spain) from the selective harvest. The cited mixtures were composed of organic matter (<50 mm), sludge from the water treatment plant, pruning garden and bark of pine (bunking). Almost it has been obtained the yield of the composting piles and the agronomic quality of the compost obtained. The mixture organic matter <50 mm+pruning arden+bunking (M.P.B.) shoved the best index. (Author) 15 refs.

  4. Fabrication and tests of anode supported solid oxide fuel cell; Fabricacao e testes de celula a combustivel de oxido solido suportada no anodo

    Energy Technology Data Exchange (ETDEWEB)

    Florio, D.Z. de [UNESP, Araraquara, SP (Brazil)], e-mail: dzflorio@ipen.br; Fonseca, F.C.; Franca, Y.V.; Muccillo, E.N.S.; Muccillo, R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Berton, M.A.C.; Garcia, C.M. [LACTEC - Instituto de Tecnologia para o Desenvolvimento, Curitiba, PR (Brazil)

    2006-07-01

    A laboratory setup was designed and put into operation for the development of solid oxide fuel cells (SOFCs). Ceramic single cells were fabricated by low-cost methods, and emphasis was given to the use of ready available raw materials. The whole project consisted of the preparation of the component materials - anode, cathode, and electrolyte - and the buildup of a hydrogen leaking-free sample chamber with platinum leads and current collectors for measuring the electrochemical properties of single SOFCs. Anode-supported single SOFCs of the type (ZrO{sub 2}:Y{sub 2}O{sub 3} + NiO) anode / (ZrO{sub 2}:Y{sub 2}O{sub 3}) electrolyte / (La{sub 0.65}Sr{sub 0.35}MnO{sub 3} + ZrO{sub 2}:Y{sub 2}O{sub 3}) cathode have been prepared and tested at 700 deg C and 800 deg C after in situ H{sub 2} anode reduction. The main results show that the slurry coating method resulted in single-cells with good reproducibility and reasonable performance, suggesting that this method can be considered for fabrication of SOFCs. (author)

  5. Evaluation of environmental impacts in the mining of solid fossil fuels; Avaliacao de impactos ambientais na mineracao de combustiveis fosseis solidos

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Gilda Carneiro

    1989-07-01

    This study evaluates the environmental problems caused by the mining works of coal, peat and oil schists; also it evaluates the kind of treatment used by the mining companies against water, air and ground pollution, as well as the necessary control according to the mine activities and the affected environment. the studied areas are situated at brasilian states of Santa Catarina (Criciuma, Urussanga and Sideropolis), Rio Grande do Sul (Charqueada, Bage, Cachoeira do Sul, Butia and Arroio dos Ratos), Parana (Figueira and Sao Mateus do Sul), and Sao Paulo (Iguape and Sao Jose dos Campos). This study was done through a direct inquiry, by sending questionnaire to fifteen coal mining companies, three of peat ones and one of oil schists one. besides it was done a compilation of federal and state laws concerning to the environment and on the rights and duties of the mining companies. The information brought up in this way were compiled into a data bank, which allowed and sample surveys of environmental condition in the different industries and further it enabled a comparison between the real facts and the bibliography suggestions about adequate monitoring of the air, waters and ground, during mining activities. this analysis showed that the environment problems, created by the three former kind of mining works, are under control through projects of environment restoring and monitoring in phase of implantation and that these projects are restricted to that less expensive and easier to construct (holding back in pools or reservoirs, pouring in pits and aspersion). It was not notices a significant monitoring of parameters considered to be critical to the environment (metals, cyanides, sulphide and general bacteria). Almost all the companies have not yet exact data about the efficiency of each kind of environmental treatment because it is new ones and are just in follow-up and consequently they have not yet parameters to change the adequate the steps of the treatment, because of lack of information. Any way it is not a justification to the present condition of environment control of these companies, just because its of their responsibility the consequences of their producing activities. (author)

  6. Physico-chemistry characteristics of compost from urban solid wastes in Valencia (Spain); Caracteristicas fisico-quimicas de los composts de residuos solidos urbanos de la Comunidad Valenciana

    Energy Technology Data Exchange (ETDEWEB)

    Albiach, M. R.; Canet, R.; Pomares, F.; Tarazona, F.; Chaves, C.; Ferrer, E.

    2004-07-01

    For nearly twenty years samples of MSW compost produced in the Valencia region. have been analysed in our laboratories. Their main characteristics are summarised and discussed in this article, which reveals their compliance with current regulations, but also the problems which may arise if stricter requirements are eventually applied by the European Commission. (Author)

  7. Urban solid wastes management in Montnegre-Corredor (Catalonia, Spain); La gestion de residos solidos urbanos en parques naturales. El Montnegre- Corredor

    Energy Technology Data Exchange (ETDEWEB)

    Rieradevall i Pons, J.; Boada i Unca, M.; Fresquet, C. M.

    2004-07-01

    With a aim to gaining some knowledge about urban solid waste management in the Montnegre- Corredor Park (Catalonia), the most significant related aspects were analyzed: the different public administrations involved, waste collector type of transport, treatment and, finally, waste disposal and its production from 1999 to 2002. Economical, environmental and social aspects of solid waste management at the Park were also studied. From this analysis we can establish that there is no specific plant for solid waste management in the Park, and action is limited to basic waste collection services. Moreover, there is a multiplicity of managers. In terms of maintenance it must be pointed out that selective collection is non-existent, and critical points have been identified in the most popular areas. The study also put forward a new solid waste management plan for the Park, recommending the unification of managers and the reduction of about 23% of emissions from waste collection. The plan is designed to improve the solid waste management peculiar to the Montnegre- Corredor Natural Park (Catalonian). (Author)

  8. Management of the solid waste in perforation projects exploratory hydrocarbons; Manejo de los residuos solidos en proyectos de perforacion exploratoria de hidrocarburos

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Miranda, J.P.

    2010-07-01

    This paper describes de considerations for solid waste management in hydrocarbons exploration projects, as the serious environmental affectation as a function of soil contamination by leachate form the temporary storage of contaminated industrial waste hydrocarbons, altered by the presence of deposits landscaping waste materials, pollution of water and vegetation and the production of odors.

  9. Environmental monitoring recovery of solid wastes in Muribeca (Brasil). 2 part; Monitoreo ambiental de la recuperacion del vertedero de residuos solidos de Muribeca, Brasil-II parte

    Energy Technology Data Exchange (ETDEWEB)

    Juca, J. F. T.; Monteiro, V. E. D.; Melo, M. C.

    2002-07-01

    This paper presents a comprehensive program of studying and monitoring the in situ performance of Muribeca Landfill, Physical, chemical and biological properties of the solid waste were analyzing in order to understand the mechanics of the landfill, the waste biodegradation process and the contamination level of air, liquids and subsoil. the parameters monitored in this investigation involve from leachate and gases generation to salts variations and the evolution of bacteria growth. Climate variation, among several others environment parameters, that affects solid waste degradation in sanitary landfills, were also controlled. Temperature, settlement, physical-chemical parameters, pathogenic microorganisms determination (quantitative and qualitative) and phyto toxicity are also part of this study. Secondary determinations as: moisture content, volatile solids, pH, grains density, and metals evaluation in different depths were also investigated. (Author) 23 refs.

  10. Eco-efficiency analysis of techniques for disposal of urban solid waste; Analise de ecoeficiencia de tecnicas para tratamento e disposicao de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Dmitrijevas, Cibele

    2010-07-01

    Municipal solid waste is one of the major problems of modern society. In this sense it is necessary to discuss solutions to the fate of waste generated daily, increasingly in larger amounts, being imperative to advance the search for alternatives, not only in search of new technologies and solutions, as well as the improvement of methodologies currently employed to solve this relevant issue, especially in large urban centers. This paper presents the results of a comparative economic-environmental assessment performed by a method developed by BASF, two potential technologies: landfill and incineration with energy recovery. To facilitate the work, the information used were both real data - landfill and incinerator - Essencis Solucoes Ambientais S.A., (assuming some assumptions) and the use of secondary data, using the study of Arena et al., 2003. This ecoefficiency analysis tool covers the methodology of Life Cycle Assessment (LCA), which is a technique to evaluate the inputs and outputs of matter and energy and the potential environmental impacts associated with all stages of resource extraction and their transformations , and the use and final disposal of the product. The data in the environmental assessment are presented according to major categories, using a weighting method developed by BASF and understand the consumption of natural resources, consumption of energy resources, air emissions, water and soil, potential for human toxicity, accidents work, occupational diseases and land use. Economic evaluation in this work took into account the costs involved in operation and maintenance of disposal techniques or treatment of waste. The comparative study found the treatment or disposal of 7.324109 billion kilograms of waste. As a result, the array of eco-efficiency indicates that the incinerator is the alternative that stands out, considering the environmental and economic profile, within the assumptions made in this study and taking into account which is a technique with energy recovery. (author)

  11. Characterization of solid wastes from two different hot-dip galvanizing processes; Caracterizacion de residuos solidos procedentes de dos procesos distintos de galvanizado en caliente por inmersion

    Energy Technology Data Exchange (ETDEWEB)

    Delvasto, P.; Casal-Ramos, J. a.; Gonzalez-Jordan, O.; Duran-Rodriguez, N. C.; Dominguez, J. R.; Moncada, P.

    2012-11-01

    Zinc dust and zinc ash from hot-dip galvanizing industries located in Venezuela were characterized using atomic spectroscopy, scanning electron microscopy, X-Ray diffraction and infrared spectroscopy. Dust was formed during the high-pressure drying process of the galvanized pieces, in a plant that uses a steel kettle to hold the molten zinc. Ash identified as A came from the same plant as the dust, while ash identified as B came from a hot-dip galvanizing plant which use a ceramic lined galvanizing furnace. Dust contained 98 wt % Zn, in metallic form. Both ash samples contained: Zn and ZnO, while Zn{sub 5}(OH){sub 8}Cl{sub 2}×H{sub 2}O and ZnCl{sub 2} were only found in ash B. Globally, ash “A” and ash “B” contain 71 and 75 wt % Zn, respectively. (Author)

  12. Elaboration of building materials from industrial waste from solid granular diatomaceous earth; Elaboracion de material de construccion a partir de residuos industriales solidos granulares procedentes de tierras diatomaceas

    Energy Technology Data Exchange (ETDEWEB)

    Del Angel S, A.

    2015-07-01

    In this work the initial characterization of granular solid industrial waste from diatomaceous earth was carried out using techniques of Scanning Electron Microscopy and X-ray Diffraction. In a second stage leaching of the material was undertaken to the US Patent Number 5, 376,000 and 5, 356,601 obtaining the samples M1-S ph 2, M1-L ph, M1-S ph 10 and M1-L ph 10. In the third stage a new characterization of the samples obtained with the techniques of Scanning Electron Microscopy, X-ray Diffraction and Atomic Absorption Spectrometry was performed, the latter in order to determine the efficiency percentage of the leaching process. In the fourth stage the specimens for performing mechanical, physical and chemical tests were manufactured, using molds as PVC pipes of 1 inch in diameter and 2 inches in length, with a composition of 50% of diatomaceous earth and 50% of cement produced in each. Finally, in the fifth stage mechanical testing (compression resistance), physical (moisture absorption rate) and chemical (composition and structure of the material) are performed. In the last stage, when conducting mechanical testing with the test specimens, the presence of bubbles enclosed in each obtaining erroneous results noted, so it was necessary to develop the specimens again, obtaining in this occasion concentrations of 20:80, 40:60, 60:40 and 80:20 of diatomaceous earth with the cement. These results were analyzed to determine if the used material is suitable for the production of building materials such as bricks or partitions, being demonstrated by the tests carried out if they are eligible. (Author)

  13. Environmental monitoring recovery of solid wastes in Muribeca, (Brasil): 1 part; Monitoreo ambiental de la recuperacion del vertedero de residuos solidos de Muribeca, Brasil- 1 parte

    Energy Technology Data Exchange (ETDEWEB)

    Juca, J. f. T.; Monteiro, V. E. D.; Melo, M. C.

    2002-07-01

    This paper presents a comprehensive program of studying and monitoring the in situ performance of Muribeca Landfill. Physical, chemical and biological properties of the solid waste were analyzing in order to understand the mechanics of the landfill, the waste biodegradation process and the contamination level of air, liquids and subsoil. The parameters monitored in this investigation involve from leachate and gases generation to salts variations and the evolution of bacteria growth. Climate variation, among several others environment parameters, that affects solid waste degradation in sanitary landfills, were also controlled. Temperature, settlement, physical-chemical parameters, pathogenic microorganisms determination (quantitative and qualitative) and phytotoxicity are also part of this study. Secondary determinations as: moisture content, volatile solids, pH, grains density, and metals, evaluation in different depths were also investigated. (Author)

  14. Environmental indicators for solid waste management of oil industry; Indicadores ambientais para a gestao de residuos solidos oleosos da industria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Mara R.F.V. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Holanda, Francisco S.R. [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil)

    2004-07-01

    The Chapter 40 of the Agenda 21 guides for the use of indicators as effective instruments to synthesize and to transmit information in a significant way, inside of the making decision process. The environmental indicators aid in the analysis of the environmental quality, which depends on the pressure exercised in the environment and they possess the communication function and administration function. To facilitate the communication, the indicators should be in reduced number and of easy understanding. To facilitate the administration, the indicators should be aligned with the political questions. This work defined 15 environmental indicators for the System of environmental administration of oil waste of the oil industry as instruments to organize, to systematize, to quantify, to simplify and to communicate relative information to several environmental aspects, using the model Pressure-state-impact-answer proposed by PNUMA-CIAT (1996) added of prospective indicators, making possible to determine the type and the nature of the socio-environmental relationships. (author)

  15. Hazardous solid wastes management in Antioquia (Columbia); Lineamientos para la gestion de residuos solidos especiales peligrosos en el area matropolitana del valle De Aburra (Antioquia-Colombia)

    Energy Technology Data Exchange (ETDEWEB)

    Agudelo Garcia, R. A.; Yepes Palacio, D. Y.

    2002-07-01

    The aim of the present study was to determine the sort of problems associated with management of dangerous waste in the metropolitan area of Aburra Valley, located in Antioquia. Colombia. In the area there are organizations responsible for handling, control detracting, and managing dangerous waste. Yet, their current management policies are deficient. The study supports the design of proposals and guidelines that, from different points of view, indicate handling methods for this type of waste, starting from strategies for strengthening and encouraging actions for its integral management. (Author)

  16. The energy use of urban solid waste from another angle; El aprovechamiento energetico de los residuos solidos urbanos desde otro enfoque

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Centeno, L. M.

    2011-07-01

    This article highlights the advantages of the use of previous treatments, especially BioSec systems within the Mechanical Biological Treatment in energy recovery plants. also described a new technique for extracting biogas from landfills will rejections in a much more advantageous than a conventional landfill, which applies in the so-called bioreactors-activable. (Author)

  17. Analysis of technological options for electric energy generation from urban solid wastes; Analise de opcoes tecnologicas para geracao de energia eletrica a partir de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, J.G. de M.; Serra, E.T. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], Emails: furtado@cepel.br, etserra@cepel.br

    2010-07-01

    This paper evaluates technologically of the options existents for generation of electric power from the urban solid wastes (USW), based on application of factoring method for estimation of investments based on basic description of the plant, it main equipment and technological complexity, viewing to contribute for determination of better technical and economical form, and the energy using. The results of the effectuated analyses indicates that the most technological complexity of the gasification and thermal plasma, and be encountered on non commercial in great scale as well, make the the option present the greatest index of investment and relative cost, determining the greatest costs of electric power generated through this process.

  18. Integration of the management of urban solid residues and muds: a symbiotic solution; Integracion de la gestion de residuos solidos urbanos y lodos: una solucion simbiotica

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, T.; Mulder, M.; Van Berlo, M.

    2008-07-01

    Linking a sewage treatment plant and a waste-to-energy plant brings energy efficiency benefits to both. The combined plant minimizes environmental impact and maximizes energy production, putting Amsterdam at the forefront of urban waste management. (Author)

  19. Mechanical and trybological characterization of ceramic materials obtained of mine solid wastes; Caracterizacion mecanica y tribologica de materiales ceramicos obtenidos de residuos solidos mineros

    Energy Technology Data Exchange (ETDEWEB)

    Soto T, J.L

    2003-07-01

    A discussion of the physical, mechanical and tribological characterization of the ceramics Jaar, Jaca and Vijaar is presented in this work. They have been obtained from the industrial residuals, coming from metals and sand of the mining industry in Pachuca Hidalgo, Mexico. The methodology followed for the obtention and characterization of these ceramics consists on eliminating the cyanides from the tailings through columns coupled with a system controlled with thermostats. Then, the chemical composition is analysed with spectrometry emission of plasma and scanning electronic microscopy. Then the ceramics are produced. The base material is agglutinated with clay or kaolin. For this purpose, it was used a sintering processes and isothermal compacting in hot condition. Finally, the physical, chemical, mechanical and tribological properties of these new products are determined. Carbon, oxygen, sodium, magnesium, aluminium, manganese, silicon, potassium, phosphor, calcium, titanium, iron, molybdenum, silver and gold are in the chemical composition or ceramic analysed. Also these are heterogeneous mixture of clay and kaolin. The cyanide was eliminated. The results show that Vijaar has better wear resistances to the waste; this was demonstrated in tribology tests. They were not perforated with the abrasive particles. Also, they have high hardness and they can to support more loads in compression than Jaar and the Jaca. Consequently, they are less fragile and, therefore, they can tolerate bending stresses and bigger impact loading. (Author)

  20. The case study of management of solid wastes in a petroleum industry; O estudo de caso do gerenciamento de residuos solidos em uma refinaria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Lizabela Souza de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica]. E-mail: lizabela@eq.ufrj.br; Nicolaiewsky, Elioni [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Quimica]. E-mail: elioni@eq.ufrj.br; Freire, Denize D.C. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica. Dept. de Engenharia Bioquimica]. E-mail: denize@eq.ufrj.br

    2003-07-01

    Crude oil refining is an industrial activity known as very pollutant, as all other activities of the petroleum industry, regarding either the volume or the concentration of the resides involved, thus generating emissions, effluents and solid wastes. The aim of the present work is to study solid waste management of a certain petroleum refinery, located in Rio de Janeiro. On the solid wastes management of that refinery, the following aspects were considered: origin and period of generation, conditioning, storage, transportation, treatment and final disposal. After listing all the resides and through analysis of the industrial wastes (norms, terms, inventory), the industrial process and office routines were then analyzed. The solid wastes were divided in two categories: industrial and administrative wastes. As far as destination is concerned, resides classified as Class I are either co-processed or incinerated, while Class II and Class III wastes, when not recycled, are sent to industrial or sanitary landfill. Finally, after analyzing the wastes management of the refinery, it has been proposed a plan of achievements in order to enhance the environmental goal of the refinery. (author)

  1. Energetic use of the urban solid wastes (waste-to-energy); Aproveitamento energetico de residuos solidos urbanos (waste-to-energy)

    Energy Technology Data Exchange (ETDEWEB)

    Dodde, Paula Arrais Moreira; Fonseca, Zilton Jose Sa da [Universidade Federal do Rio de Janeiro (PPE/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico], Emails: pauladodde@yahoo.com.br, ziltonfonseca@ig.com.br

    2010-07-01

    This paper approaches the advantages and disadvantages of energetic using of biomass present in the garbage (the urban solid residue is composed by average 65% of organic material)This paper effluents technologically.

  2. Vitrification of galvanic solid wastes: solutions for the east area of Sao Paulo, Brazil; Vitrificacao de residuos solidos galvanicos: solucao para a zona leste de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Cleiton dos Santos; Castanho, Sonia Regina Homem de Mello [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    Galvanic solid waste have elevated levels of heavy metals and usually are stocked in the industry, creating a worrisome environmental liabilities. This disturbing fact is aggravated in areas densely populated as the area east of Sao Paulo, which has a pole of industrial electroplating of chrome. The present paper, we describe and provide a technological option for the disposal of waste generated by this activity using techniques that allow the incorporation of these in a glass matrix. The wastes were characterized by XRF, EDS, ICP-AES, AAS, DTA/TGA, XRD and SEM-FEG and embedded in glass and frits made from the system SiO{sub -}CaO-Na{sub O}, with additions of up to 30% by weight. The results of the analysis of residues showed the majority presence of Ni, Cr, B, Cu, Ca and S. The resulting glasses showed that heavy metals were incorporated into its structure and probably replacing the Ca and Na. In addition, the products showed specific colors indicating the possibility of use in some segments of manufacturing in ceramics with glazes, loading and pigments. (author)

  3. Campinas metropolitan region: solid waste management for regional sustainable development; Regiao metropolitana de Campinas: gestao de residuo solido para o desenvolvimento regional sustentavel

    Energy Technology Data Exchange (ETDEWEB)

    Nagle, Elizabeth Camargo; Teixeira, Egle Novaes; Craveiros, Stephanie Grant; London, Pedro; Ferreira, Ronan Goncalves [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo; Streb, Cleci Schalemberger [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica

    2004-07-01

    Each person generates a lot of residues in their daily activities. The life cycle of residues, production, collection, transportation, treatment and/or end use have negatively impacted the environment. The society has unobserved the limits for the environment and is living with an undesirable pollution level, regarding the capacity of absorbing and recycling residues and materials. Due to these, there is a necessity of rethink the actual model of development adopted by the society. Regarding the global sustainability, the residue management needs to be planned in order to assure the surviving of future generation with life quality. By a theoretic analysis, this article objective is to evaluate the residue management of Campinas Metropolitan Region interference at the regional sustainable development. (author)

  4. Solid state transformers: toward to a more flexible, better and more reliable energy; Transformadores de estado solido: rumo a uma energia mais flexivel, melhor e mais confiavel

    Energy Technology Data Exchange (ETDEWEB)

    Maitra, Arindam; Sundaram, Ashok [EPRI, Palo Alto, CA (United States); Gandhi, Mahesh; Bird, Simon; Doss, Shoubhic [Silicon Power Corporation, San Diego, CA (United States)

    2010-10-15

    Besides to be passive, large and more and more expensive, the conventional transformers do not supply the energy with the quality and control required by the present loads. This paper describes the project and the application of a universal intelligent transformer, based on the promising solid state technology which foreseen advanced thermal management, flexibility, reliability and power quality, and the accessible costs as well. (author)

  5. Urban solid wastes management in autonomous communities: The COGERSA case; La gestion de los residuos solidos urbanos en las comunidades autonomas. El caso de cogersa

    Energy Technology Data Exchange (ETDEWEB)

    Brio del Gonzalez, J. A.; Junquera Cimadevilla, B. J. [Universidad de Oviedo (Spain)

    1999-08-01

    The new normative demands anticipate important changes in the form of administering the residuals of several Spanish communities, so the current models are really far of reaching the precepts established in the laws. In this article. We pretend analyze how the problem of the residuals in the Principality of Asturias is being approached, considering that it now constitute a community in the one which is feasible fulfill the objectives established in the legislation. (Author)

  6. The state of the art of urban solid wastes in Latin American and Caribeau Sea; Situacion del manejo de residuos solidos urbanos en America Latina y el Caribe

    Energy Technology Data Exchange (ETDEWEB)

    Calvo Redruejo, F.; Szanto Narea, M.; Munoz Jofre, J.

    1998-12-01

    Concerning Municipal Solid Waste management in South america, there is along way to walk. The author gives a global view of the environmental situation in those countries. Population, health, education, economic situation, are elements that help to understand how these countries manage wastes. (Author)

  7. Fluidized bed gasification of the fuel fraction of municipal solid wastes; Gasificacion en lecho fluidizado de la fraccion combustible de los residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, J.; Baldasano, J. M.; Gasso, S. [Universidad Politecnica de Cataluna. Barcelona (Spain)

    1998-12-31

    In this paper, the results obtained in the application of the fluidized-bed gasification to the treatment of solid waste with high heating value. These wastes could be valuable materials in thermo conversion processes such as gasification. The combustible fraction of municipal solid waste (MSW) composed of paper, cardboard, plastics (PET,PVC), referred as refuse derived fuel (RDF), has been considered in this work. The experimental facility consists of an air-blown gasifier operating at atmospheric pressure with a capacity of 50 kg/h. The results obtained show that the gasification of RDF allows to produce a gas with a high heating value (HHV) of 7.8 Mj/Mn3 and recovering more than 80% of the initial HHV of the waste in the cold gas. Solid residue produced in the gasification process is lower than 10% of the initial waste. (Author)

  8. Incineration plant of urban solid wastes in Tarragona: experiences of five year functioning; Planta incineradora de residuos solidos urbanos de Tarragona: experiencias de cinco aos de funcionamiento

    Energy Technology Data Exchange (ETDEWEB)

    Nadal Albiol, R.

    1996-12-01

    The incineration plant of urban solid wastes in Tarragona (Spain) was founded in 1991. After five years, the author does an review of the state of the art in the plant. The technical environmental experience are shown. (Author) 7 refs.

  9. Energetic planning in civil engineer: solid urban residues incineration; Planejamento energetico na engenharia civil: o caso da incineracao de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Mariotoni, Carlos Alberto; Ferruccio, Sheilla Jones Akel [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Civil

    1993-12-31

    There is an Hybrid Thermic Reactor operating in Americana (SP) since 1986 with the only duty of incinerating hospital residues. This kind of pyrolytic decomposition had proved to be self-sustainable on the energetic point of view based on the composition of the hospital waste. So, it seems interesting to compare, energectly, the mass reduction efficiency existent in the operation of the Hybrid Thermic Reactor and the expected in the work being developed about Thermochemical Decomposition in situ, an attempt without preceding of reproduction of the effects of a pyrolytic reactor inside existing cells in landfills, using as a generating heat source the biogas generated in adjacent cell in the same area. (author) 4 refs., 3 figs.

  10. Urban Solid Wastes management project in Granada (Spain); Plan director de gestion de residuos solidos urbanos de la provincia de Granada

    Energy Technology Data Exchange (ETDEWEB)

    Beas Torroba, J.; Gallardo Garcia, V.; Alcain Martinez, G.

    1996-12-31

    Granada is characterized by the following features: The urban nucleus are very extended, the town hall has very few economical resources, the orography is steep, the water-bearings are vulnerable to be polluted by the underground water and about 40% of its surface is occupied by soils, that must be protected. The Urban Solid Waste Management has become their main objective and they have created the Urban Solid Waste Management Leading Project, initiative that was confirmed 5th November 1985. (Author)

  11. Air quality around of incineration plan of solid urban wastes; Calidad del aire en el entorno de una incineradora de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Mateu Barcelo, J.; Mas Torres, F.; Cerda Martin, V.; Colom-Altes, M.; Oms Molla, M.T.

    1996-12-01

    The measuring surveillance and control of incineration plant of urban solid wastes in San Reus has the main mission on the control of quality air in this are. The present study analyzes the data of emission of metal wastes. (Author)

  12. Leachates control in sanitary landfills of urban solid wastes in Gipuzkoa; Control de lixiviados en los vertederos de residuos solidos urbanos de Gipuzkoa

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Martin, M.A.; Antiguedad Auzmendi, I.

    1998-12-01

    The physico-chemical characterization of the leachates from seven sanitary landfills in Gipuzkoa has been studied. Flow rate, temperature and electric conductivity were monitored on line in some cases too. HELP model and other classic methods were applicated to calculate exactly the water balance. The authors conclude suggesting that these studies are essentials to know if the landfills are really sanitary landfills. (Author) 14 refs.

  13. Incineration as treatment system of urban solid wastes. La incineracion como parte del sistem integral de tratamiento de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Serrano Martinez, F. (IDAE. Madrid (Spain))

    1993-01-01

    Spain produces 12 million tons of municipal solid wastes. The incineration is the cleanest process and, at the moment, its use is complementary with the recycling. This article analyzes the Spanish situation and the process in USA and European Community.

  14. International experience of Foster Wheeler in the incineration of urban solid wastes; Experiencia internacional de Foster Wheeler en el campo de la incineracion de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Eisen, C.; Florez, J. M.

    1996-12-01

    The enterprise Foster Wheeler presents its experience on incineration or urban solid wastes. The main examples of construction in the international area are the Camden and the Valorsul plants. (Author)

  15. Development of an area monitor for neutrons using solid state nuclear track detector; Desenvolvimento de um monitor de area para neutrons utilizando detector solido de tracos nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Zahn, G.S.

    1994-12-31

    An area monitor for neutrons composed of the solid state nuclear track detector (SSNTD) Makrofol DE, together with a (n,{alpha}) converter, in the center of a 25 cm diameter polyethylene sphere, is developed. The optimal electrochemical etching conditions for the detection of thermal neutrons by the Makrofol DE using the BN converter are studied, leading to the choice of 55 min, at 30{sup 0} C, under a 44,2 kV.cm{sup -1} electric field with oscillation frequency of 2,0 khz. The response of this system to thermal neutrons, in the optimal conditions, is of 2,76(10)x 10{sup -3} tr/n. Changing from the BN converter to a 2,73(3)g compressed boric acid tablet this value lowers to 3,88(17)x 10{sup -4} tr/n. The performance of the whole monitor in the detection of fast neutrons is examined using the BN converter and neutrons from a {sup 241} Am Be source, with a response of 4,4(2)x 10{sup 3} tr.mSv{sup -1}.cm{sup -2} and operational limits between 7(3){mu}Sv and 5,6(2)mSv. The result of the monitoring of the control room of the IPEN Cyclotron accelerator are also presented as a final test for the viability of the practical use of the monitor. (author). 34 refs, 15 figs, 6 tabs, 1 app.

  16. ESTABLECIMIENTO DE UNA TECNOLOGÍA SUSTENTABLE EN UNA EMPRESA REFRESQUERA A TRAVÉS DE UNA RECICLADORA DE RECIDUOS SOLIDOS.

    OpenAIRE

    Aguilar Espino, Eduardo

    2015-01-01

    Esta investigación tuvo como objetivo diseñar un proyecto de Inversión para una empresa refresquera en el Estado de México, que promueva el cuidado del medio ambiente a través de la adquisición de una recicladora para el manejo de residuos sólidos. Informar sobre la problemática actual del aumento desmedido de los residuos sólidos y el impacto que este tiene al medio ambiente, mencionando datos sobre las cantidades de estos desechos así como su manejo. El consumo global d...

  17. Construction of sample rotation systems for high resolution solid NMR spectroscopy; Construcao de sistemas de ortacao de amostras para espectroscopia de alta resolucao em solidos por RMN

    Energy Technology Data Exchange (ETDEWEB)

    Bonagamba, T.J.; Moretto, G.; Panepucci, H.C. [Sao Paulo Univ., Sao Carlos, SP (Brazil). Inst. de Fisica e Quimica; Diaz, L. [Buenos Aires Univ. Nacional (Argentina). Facultad de Farmacia y Bioquimica

    1993-12-31

    There are two main problems which impede the obtention of high resolution spectra in solids by NMR. The first is that the NMR lines are extremely enlarged by bipolar magnetic interactions and quadrupolar electric interactions. The second problem is the anisotropic chemical shift. This work presents a methodology to eliminate such problems, the sample rotation at magic angle. A case study is presented 4 refs., 3 figs.

  18. Applications of lipid nanocarriers for solid tumors therapy: literature review; Aplicacoes das nanoparticulas lipidicas no tratamento de tumores solidos: revisao de literatura

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Lidiane Correia de; Souza, Leonardo Gomes; Marreto, Ricardo Neves; Lima, Eliana Martins; Taveira, Stephania Fleury [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Fac. de Farmacia; Taveira, Eliseu Jose Fleury, E-mail: stephaniafleury@gmail.com [Hospital Erasto Gaertner, Curitiba, PR (Brazil). Oncologia Clinica

    2012-07-01

    Introduction: Lipid nanocarriers are systems used to target drugs to its site of action and have attracted attention of the scientific community because they are biocompatible and biodegradable. These systems can target drugs to solid tumors, providing sustained drug release in the site of action, thus increasing the utility of the antineoplastic chemotherapy. Objective: To review the available literature on in vivo experiments with lipid nanocarriers containing cytotoxic drugs for solid tumors treatment. Method: A search study was carried out in Pubmed{sup R} database from 2007 to 2011, with subject descriptors: liposomes, lipid nanoparticles, cancer and in vivo, with the boolean operator 'and' among them, in English. Results: 1,595 papers related to the use of liposomes and 77 related to lipid nanoparticles were found. Few studies reported in vivo experiments with lipid nanoparticles (28 papers) compared to liposomes (472 papers), since liposomes were developed two decades before lipid nanoparticles. Four liposomal medicines have already been approved and are used in the clinic while only one medicine containing lipid nanoparticles is in phase I of clinical studies. Conclusion: The number of papers related to the use of nanotechnology for cancer treatment is increasing rapidly, making important to know the different kinds of nanocarriers and, especially, those which are already used in the clinic. There are only few clinical studies on lipid nanocarriers; however, these systems present an enormous potential to improve the clinical practice in oncology. (author)

  19. Multi-metallic anodes for solid oxide fuel cell applications; Anodos multi-metalicos para aplicacoes em celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Restivo, T.A. Guisard; Mello-Castanho, S.R.H. [Instituto de Pesquisas Energeticas e Nucleares (CCTM/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia dos Materiais; Leite, D. Will [Instituto de Pesquisas e Estudos Industriais (IPEI/FEI), Sao Bernardo do Campo, SP (Brazil). Fac. de Engenharia Industrial

    2009-07-01

    A new method for direct preparation of materials for solid oxide fuel cell anode - Ni- YSZ cermets - based on mechanical alloying (MA) of the original powders is developed, allowing to admix homogeneously any component. Additive metals are selected from thermodynamic criteria, leading to compacts consolidation through sintering by activated surface (SAS). The combined process MA-SSA can reduce the sintering temperature by 300 deg C, yielding porous anodes. Densification mechanisms are discussed from quasi-isothermal sintering kinetics results. Doping with Ag, W, Cu, Mo, Nb, Ta, in descending order, promotes the densification of pellets through liquid phase sintering and evaporation of metals and oxides, which allow reducing the sintering temperature. Powders and pellets characterization by electronic microscopy and X-ray diffraction completes the result analyses. (author)

  20. Model of two temperatures of the laser evaporation of solid targets; Modelo de dos temperaturas de la evaporacion laser de blancos solidos

    Energy Technology Data Exchange (ETDEWEB)

    Tolentino E, P. [Facultad de Ciencias Fisico Matematicas, BUAP, Puebla (Mexico); Gutierrez T, C.; Camps C, E. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)

    2007-07-01

    The energy transmission in the evaporation process of a solid target by a laser pulse by means of the model of two temperatures which consists on two equations of heat conduction coupled by means of an electron-phonon coupling factor that means the energy transfer rate between the electrons and the net is described. This electron-phonon coupling factor is calculated for the particular case of the graphite, the obtaining of the analytic solutions in a space dimension of the system of non linear partial differential equations is shown considering two forms of the laser pulse (gaussian and delta function) and the electron temperature distributions of temperature and of the net are analyzed. (Author)

  1. The recycling plant of solid urban wastes in La Ribera (Spain); Planta de reciclaje y embalaje de la mancomunidad de residuos solidos de La Ribera

    Energy Technology Data Exchange (ETDEWEB)

    Corella Ainaga, F.; Ortega Rojas, A.

    1999-11-01

    The present article describes the technical characteristics and the effects that gave origin to the creation of the new Plant of Treatment of Solid Urban Waste in the Mancomunidad de RSU de la Ribera (Navarra). (Author)

  2. IDENTIFICAÇÃO, RASTREABILIDADE E CERTIFICAÇÃO DE RESIDUOS SOLIDOS: UMA PROPOSTA PARA VALIDAÇÃO EM UM AMBIENTE UNIVERSITARIO HOSPITALAR.

    OpenAIRE

    Gonçalves, Marco Aurélio Carvalho; Henkes, Jairo Afonso

    2014-01-01

    Identificação por Radiofreqüência (RFID) é uma tecnologia emergente, com um enorme potencial de aplicação na gestão de resíduos. Com esta tecnologia pode-se identificar objetos à distância por meio de etiquetas que transmitam dados por sinais de radio que podem ser processados e armazenados. Outra tecnologia com grandepotencial de retorno são aplicações baseadas em plataforma WEB que permitem uma maior interação entre as pessoas em tempo real. Com o crescimento das cidades,bem como dos custos...

  3. The recovery plants of solid wastes: the technology for the environment; Plantas de recuperacion de residuos solidos: tecnologia al servicio del medio ambiente

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, E.

    1996-12-01

    The recovery plant built by FAES-AMADEO FARELL, S.A. in Tarragona has an area of 150.000 m``2 and it combines the best environmental-friendly technology in this field. Then main objective of this plant is to include in the production cycle all the wastes that can be recovered and avoid their dumping landfills. (Author)

  4. Coal Mining Spoil Heap Management as urban solid waste dump; Utilizacion de Escombreras de Carbon como Vertedero Controlado de Residuos Solidos Urbanos

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    In the coordinated project DISPOSAL OF SOLID RESIDUES FROM COAL it is included the project Coal Mining Spoil Heap Management as Urban Solid Waste Dump. The main target of this project consisted of determining the viability of using coal mining spoil heaps, as controlled dubbish dump of urban solid wastes. The working plan to achieve this objective was composed of the following stages: 1. Urban solid wastes characterization. 2. Methodology to be followed for the selection of coal mining spoil heaps as controlled dump of urban solid wastes. 2.1 Classification and preliminary assessment of the possibility of using spoil heaps as urban solid waste dumps (APT/NON APT). 2.2 Realization of geological, geotechnical, hydrogeological and environmental studies applied to the spoil heaps classified as APT. 2.3 Analysis of the compatibility of the mining activity with the urban solid wastes dumped on the spoil heap. 2.4 Analysis of the use of coal mining wastes in the rubbish dump operative life. 3. Extraction of conclusions. The works were focused in the Leon province. As result of the researches we obtained the following results and conclusions: In the areas studied, only two emplacements are optima to dump urban solid wastes; spoil heap n. 13. Roguera Mine (Cinera-Matallana) and the open pit mine n. 4, Las Chaviadas, in Villablino. The active spoil heap use as controlled rubbish dump can cause, if not managed adequately, several coperating and occupational problems to the mine and to the company that manages the urban solid wastes. The abandoned spoil heap utilisation is difficult due to the problems that would arise when conditioning the site to be use as rubbish dump. The use of abandoned open pit mines, as controlled rubbish dump is feasible if geological, geotechnical, hydrogeological and environmental studies support it. It's possible the use of the coal mining wastes in the different operatives phases of the controlled rubbish dump. The evaluation methodology developed during the project is considered satisfactory, therefore we don't consider necessary to prosecute the research in this field. The methodology could be used in the future for looking for suitable rubbish dumps in other mining areas, especially when no other adequate locations are available, even though such need is not apparent by now. (Author) 10 refs.

  5. Generation projection of solid and liquid radioactive wastes and spent radioactive sources in Mexico; Proyeccion de generacion de desechos radiactivos solidos, liquidos y fuentes radiactivas gastadas en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Garcia A, E.; Hernandez F, I. Y.; Fernandez R, E. [Universidad Politecnica del Valle de Toluca, Km 5.7 Carretera Almoloya de Juarez, Estado de Mexico (Mexico); Monroy G, F.; Lizcano C, D., E-mail: fabiola.monroy@inin.gob.mx [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2014-10-15

    This work is focused to project the volumes of radioactive aqueous liquid wastes and spent radioactive sources that will be generated in our country in next 15 years, solids compaction and radioactive organic liquids in 10 years starting from the 2014; with the purpose of knowing the technological needs that will be required for their administration. The methodology involves six aspects to develop: the definition of general objectives, to specify the temporary horizon of projection, data collection, selection of the prospecting model and the model application. This approach was applied to the inventory of aqueous liquid wastes, as well as radioactive compaction organic and solids generated in Mexico by non energy applications from the 2001 to 2014, and of the year 1997 at 2014 for spent sources. The applied projection models were: Double exponential smoothing associating the tendency, Simple Smoothing and Lineal Regression. For this study was elected the first forecast model and its application suggests that: the volume of the compaction solid wastes, aqueous liquids and spent radioactive sources will increase respectively in 152%, 49.8% and 55.7%, while the radioactive organic liquid wastes will diminish in 13.15%. (Author)

  6. Study of poly butadiene molecular mobility by NMR in the solid state; Estudo da mobilidade molecular do polibutadieno por RMN no estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Maria Rita G.; San Gil, Rosane A.S. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Quimica; Tavares, Maria Ines B. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas

    1995-12-31

    This work has aimed to study commercial poly butadiene using {sup 13} C NMR spectroscopy in the solid state through relaxation time investigation, in order to characterize its molecular mobility in the solid state and structure. NMR spectra are presented and analysed and chemical shifts are also observed and discussed 3 refs., 3 figs., 1 tab.

  7. New concepts in treatment of gaseous emissions at solid wastes incinerators. Nuevos conceptos de depuracion de gases de incineradores de residuos solidos

    Energy Technology Data Exchange (ETDEWEB)

    Narvaez, I.; Corella, J.; Aznar, M.P.; Borque, J.A.

    1993-01-01

    New systems for treatment of gaseous emissions from solid wastes incinerators are described, with special emphasis on those developed in Spain. It consists of processes with two and three steps of exhaustive cleaning, catalytic and at high temperatures. (Author)

  8. Suspended sediment measurements in the Llobregat River Mouth; Compana de medida de concentracion de solidos en suspension en la desembocadura del rio Llobregat

    Energy Technology Data Exchange (ETDEWEB)

    Sotillo Membibre, M.

    2011-07-01

    Sediment concentrations were measured at the Llobregat river mouth near Barcelona, using an ADCP. the ADCP backscatter intensity was corrected fro sound loss in the water column and was calibrated to sediment concentrations on the basis of water samples, that were taken in the water column. This holds for cases where particles are small compared to the acoustic were length so that the Rayleigh scattering law applies, which is true the ADCP. (Author)

  9. The state of the art of solid wastes processing in Latin America and Caribbean Sea; La situacion del manejo de residuos solidos en america latina y el caribe

    Energy Technology Data Exchange (ETDEWEB)

    Diaz, L.

    1998-04-01

    Accelerated population growth, combined with a substantial migration from rural to urban areas, is placing considerable strains on the provision of basic services in a number of cities in less developed countries. Some of the services that are severely impacted include water supply, solid waste collection and disposal, and sewage. Insufficient coverage of solid waste collection, improperly managed final disposition of the wastes, combined with inadequate wastewater collection and treatment, can contaminate the sources of water supply and cause serious threats to public health and the environment. (Author)

  10. Solid separation and sbr biological process for pig slurry treatment; Depuracion de purines por separacion de solidos y tratamiento biologico en SBR

    Energy Technology Data Exchange (ETDEWEB)

    Lekuona, A.; Alberdi, M.; Lekue, I.; Lasuen, M.

    2009-07-01

    Egiluze treatment plant in Renteria (Gipuzkoa, spain), has treated around 45 m{sup 3}/day of pig slurry since 2006. During this two years, the plant has been running in order to get a suitable effluent, which fulfills the corresponding parameters to be discharged to municipal drain. The treatment process consists basically of a first solid separation and subsequent nitrification-de-nitrificacion biological process using a Sequencing Batch Reactor (SBR). The technical and economic results showed in this article, prove that the process used in Egiluze treatment plant is an effective solution which allows the treatment of pig slurry in an economical and automated way. (Author)

  11. Preparation and characterization of Nafion - TiO{sub 2} composite electrolytes for application in proton exchange membrane fuel cells; Preparacao e caracterizacao de eletrolitos compositos Nafion - TiO{sub 2} para aplicacao em celulas a combustivel de membrana de troca protonica

    Energy Technology Data Exchange (ETDEWEB)

    Matos, Bruno Ribeiro de

    2008-11-06

    The fabrication and characterization of Nafion - TiO{sub 2} composites, and the use of such electrolytes in PEM (Proton Exchange Membrane) fuel cell operating at high temperature (130 deg C) were studied. The operation of a PEM fuel cell at such high temperature is considered as an effective way to promote fast electrode reaction kinetics, high diffusional transport, and high tolerance to the carbon monoxide fuel contaminant. The polymer Nafion{sup R} is the most used electrolyte in PEM fuel cells due to its high proton conductivity. However, the proton transport in Nafion is dependent on the water content in the polymeric membrane. The need of absorbed water in the polymer structure limits the operation of the fuel cell to temperatures close to 100 deg C, above which Nafion exhibits a fast decrease of the ionic conductivity. In order to increase the performance of the electrolyte operating at high temperatures, Nafion-TiO{sub 2} composites have been prepared by casting. The addition of titania hygroscopic particles to the polymeric matrix aims at the enhancement of the humidification of the electrolyte at temperatures above 100 deg C. Three types of titania particles with different specific surface area and morphology have been investigated. Nafion-based composites with the addition of titania nanoparticles, in the 2.5-15 wt.% range, with nearly spherical shape and specific surface area up to approx. 115 m{sup 2}g{sup -1} were found to have higher glass transition temperature than the polymer. Such an increase improves the stability of the electrolyte during the fuel cell operation at high temperatures. The addition of titania-derived nanotubes results in a pronounced increase of the performance of PEM fuel cell operating at 130 deg C. In this composite, the high specific surface area and the tubular shape of the inorganic phase are responsible for the measured increase of both the absorption and retention of water of the composite electrolyte. Nonetheless, the polarization curves of fuel cell using the composite electrolytes exhibited an increase of the ohmic polarization associated with the addition of the insulating titania particles. As the chemical structure of Nafion was observed to be insensitive to the addition of the inorganic particles, the high performance of the composite electrolytes is a result of competing effects: the decrease of the electrical conductivity and a higher thermal stability or water absorption/retention capacity. The experimental results suggest that the Nafion-TiO{sub 2} composites are promising electrolytes for PEM fuel cells operating at temperatures above approx. 100 deg C. (author)

  12. Determination of the percentage of quitine desacetilation reaction by solid state carbon-13 NMR; Determinacao do porcentual de reacao de desacetilacao de quitina por RMN {sup 13} C no estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Ferracin, Ricardo J. [Sao Carlos Univ., SP (Brazil). Centro de Caracterizacao e Desenvolvimento; Cass, Quezia B.; Bassi, Ana L. [Sao Carlos Univ., SP (Brazil). Lab. de Sintese Organica

    1997-12-31

    Quitine is a bi-polymer largely found in invertebrates. As most compounds of this class are insoluble in common organic solvents, the des-acetylation percentile was obtained by carbon-13 solid state nuclear magnetic resonance. The methodology is presented. Results are presented 3 refs., 1 figs.

  13. Performance of a solid oxide fuel cell with cathode containing a functional layer of LSM/YSZ film; Desempenho de uma celula a combustivel de oxido solido com catodo contendo uma camada funcional de filme LSM/YSZ

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Filipe Oliveira; Domingues, Rosana Z.; Brant, Marcia C.; Silva, Charles L.; Matencio, Tulio [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Quimica]. E-mail: filipequiufmg@ufmg.br

    2008-07-01

    Performance of a SOFC may be evaluated by using the AC-Impedance and measuring power (P V x I). The objective of this study was to compare the performance of a fuel cell with LSM as a cathode and another one containing an additional functional composite film LSM/YSZ between the LSM and YSZ. Also it was studied variation in second cell resistance and power according to the temperature, hydrogen flux and operation time. For both cells platinum was used as anode. At 800 deg C was observed, in open current circuit, when the composite layer was introduced a decrease in resistance and high power. These results show an improvement of SOFC cathode performance with the introduction of composite LSM/YSZ layer. The maximum performance of the cell was achieved with 100 mL/min hydrogen flow at 800 deg C. The experiments also showed a performance improvement at 850 deg C. The cell behavior was stable during 318 hours of test. (author)

  14. Synthesis of modified calcium aluminate with lanthanum manganite (LSM) for possible use in solid oxide fuel cell (SOFC); Sintese de aluminato de calcio modificado com manganita de lantanio (LSM) para possivel utilizacao em celula combustivel de oxido solido (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Veiga, F.C.T.; Jurado, J.; Sousa, V.C. de, E-mail: faili.cintia@gmail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Escola de Engenharia. Departamento de Materiais; Cava, S.S. [Universidade Federal de Pelotas, RS (Brazil)

    2016-07-01

    The fuel cells solid oxide (SOFC) is made up of three basic elements: two electrodes, the anode and cathode and a conductive electrolyte ions. The objective of this work consists of calcium aluminate synthesis modified LSM in a 1: 1 by combustion synthesis method with a view to its use as a cathode in SOFC. The characterization of the post was carried out by the methods of XRD, TEM and EIS. After heat treatment at 1200°C/4 hours it was possible to obtain Ca0.5Sr1.5MnO4 and CaMnO2.56 phases. The material showed a semiconductor characteristics because with increasing temperature the electrical resistance value tends to decrease obtaining electrical conductivity greater than 10-6S / cm featuring an extrinsic semiconductor with an activation energy of 0.12. Therefore, with an activation energy value within the range of materials used for a SOFC cathodes. (author)

  15. Processing of strontium-doped lanthanum manganite suspensions for cathode production of the solid oxide fuel cell; Processamento das suspensoes de manganito de lantanio dopado com estroncio para fabricacao do catodo da celula a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Chiba, R.; Vargas, R.A.; Andreoli, M.; Seo, E.S.M. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais. Lab. de SOFC - Insumos e Componentes

    2008-07-01

    The ceramic material, strontium-doped lanthanum manganite (La{sub 0,85}Sr{sub 0,15}MnO{sub 3} - LSM), has been used as cathode in Solid Oxide Fuel Cells (SOFCs). The cathode attainment as component of the SOFCs has been studied for diverse routes of synthesis and thin films forming in Yttria-stabilized zirconia (ZrO{sub 2}/Y{sub 2}O{sub 3} - YSZ) electrolyte. In this work, the LSM was synthesized by the citrate technique and deposited in YSZ substrate using the forming technique wet powder spraying. Rheological studies of suspensions and chemical, physical and microstructural characterizations of LSM powders were made, aiming at the deposition for thin films formation until 50 mum. The half unit cells LSM/YSZ sintered were characterized by scanning electron microscopy, for verification of porosity and adherence. In this sense, this work is a contribution for production of porous cathode using the forming technique wet powder spraying in the SOFCs. (author)

  16. Study on the levels of activity of radionuclides in products solids of catalan water purification; Estudio sobre los niveles de actividad de radionuclidos en productos solidos de plants de potabilizacion de aguas catalanas

    Energy Technology Data Exchange (ETDEWEB)

    Montana, M.; Camacho, A.; Cespedes, R.; Devesa, R.; Serrano, I.; Duch, M. A.; Valles, I.

    2013-07-01

    In this work the results of radioactivity are presented in the sludge obtained part of the treatment process of 2 water treatment plants in Catalonia in which it is water from the rivers Ter and Llobregat. He has been also assessed the radiological impact of the sludge generated in these plants when used as raw material for the production of materials for the construction. (Author)

  17. Microstructural development and characterization of lanthanum chromite-based ceramics to application in solid oxide fuel cells; Desenvolvimento microestrutural e caracterizacao de ceramicas a base de cromita de lantanio para aplicacao em celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, R.N.; Furtado, J.G. de M.; Soares, C.M.; Serra, E.T. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], e-mail: rnunes@cepel.br

    2006-07-01

    This work has for objective to investigate and to characterize the microstructural development of lanthanum chromite-based ceramics (LaCrO{sub 3}) doped with earth alkaline metals, correlating the microstructural parameters (mainly the densification level) and processing parameters with the electrothermal properties reached. Lanthanum chromite-based ceramic systems doped with earth-alkaline metals (Ca, Mg and Sr) had been produced from respective metallic nitrates by solid state reactions process. The phase compositions were evaluated by X-ray diffraction and the densification level by Archimedes method. The microstructural characterization was effected by scanning electron microscopy, energy dispersive X-ray spectroscopy and thermal analysis techniques. Electrical tests were used to evaluate the electrical conductivity of the studied ceramics. The obtained results corroborate the literature comments concerning the difficulty of lanthanum chromite-based ceramics with high densification level and evidence the great influence of the nature of the dopants on the sintering mechanism and the microstructural and electric characteristics of the produced ceramics. The best ones results, in terms of densification and electrical conductivity, had been gotten through multiple doping with calcium and strontium, and in sintering temperature conditions lower that the normally considered to pure or monodoped lanthanum chromite-based ceramics. (author)

  18. Environmental and comparative analysis between the conventional and movil recovery of municipal Solid Wastes in Barcelona (Spain); Analisis ambiental global y local comprativo entre la recogida neumatica movil y convencional de resiudos solidos muncipales en Barcelona

    Energy Technology Data Exchange (ETDEWEB)

    Sales, C.; Domenech, X.; Rieradevall, J.

    2001-07-01

    This article describes, from an environmental point of view, these factors that are affected by refuse collecting with a mobile vacuum system, a new technology that is imposing in Spanish cities. Vacuum system consists in the suction of refuse through a pipe net to a collection station (Stationary system) or to a truck (Mobil system). The environmental impacts in vacuum system are compared with impacts in conventional system. I mean collecting in containers on the street. In the evaluation of environmental impacts produced by both systems, the Life Cycle Analysis (LCA) has been used. LCA is an objective method for method for evaluating environmental charges associated to a product, process or activity in every stage of his life. The results reveal a global environmental impact lower in conventional system than vacuum system, but benefits in local environmental factors. (Author) 19 refs.

  19. Interaction study of polyisobutylene with paraffins by NMR using the evaluation of spin-lattice relaxation times for hydrogen nuclei; Estudo da interacao do poliisobutileno com parafinas por RMN no estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Marques, Rosana G.G. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas - CENPES]. E-mail: garrido@cenpes.petrobras.com.br; Tavares, Maria I.B. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas]. E-mail: mibt@ima.ufrj.br

    2001-07-01

    The evaluation of spin-lattice relaxation times of {sup 1}H for polyisobutylene/paraffin systems, were obtained using the classic inversion recovery technique, and also through Cross Polarization Magic Angle Spinning (CP/MAS) techniques varying the contact time and also by the delayed contact time pulse sequence. NMR results showed that the polyisobutylene/paraffin systems in which high molecular weight paraffins were used, is heterogeneous. However, for paraffins with low molecular weight, the system presents good homogeneity. (author)

  20. Development of waste and effluents management on board in the seismic ship operating in Brazilian seas; Desenvolvimento do programa de gestao de residuos solidos e efluentes a bordo de um navio de sismica operando em aguas brasileiras

    Energy Technology Data Exchange (ETDEWEB)

    Abreu, Mauricio Duppre de [Okeanos Consultoria e Meio Ambiente Ltda. (Brazil); Derntl, Jose Renato; Pereira, Edisio; Ribeiro, Camila Castroviejo da Silva [GEOCOOP Cooperativa de Trabalho, Rio de Janeiro, RJ (Brazil); Uller, George Andre; Oliveira, Joao Luiz Martinez de [CGG do Brasil, Rio de Janeiro, RJ (Brazil); Miranda, Cristina Maschio de [Nautilus Cooperativa de Trabalho (Brazil)

    2004-07-01

    This work presents the results regarding CGG's Waste and Effluents Management Program between February 2003 and April 2004 on M/V CGG HARMATTAN. It main objective is to trace all waste and effluents since its generation until its final disposal. To implement this program CGG has two environmental technicians on board, whose are responsible for supervising the program, as well as educating, training, and optimizing waste and effluents segregation. Furthermore, the company also employs a consultant team to logistic management on shore; whose are responsible for executing, transferring, transporting and yours final disposing. Results show a monthly generation of 7.428 Kg and 97.3 m3 in average for waste and effluents respectively. Data indicates waste generation peaks during port calls. Waste tracing has improved along the year, allowing better control and resulting in value decreasing for port calls. Effluents are constantly generated in the same amount with monthly average of 50.2 m3 for bilge water, 41 m3 for sewage and 6.1 m3 for sludge. The percentage of non-recyclable waste sent to cleaner technology (co-processing and re-use) has been increasing along the year, replacing industrial landfill and incinerator use. Latest numbers already show the first results concerning it (2.2% re-used and 24,5% co-processed of total produced solid garbage). Re -used numbers are resulted from pioneer partnership between CGG and fishermen communities, for their original activity. The reached results and environmental indicators show that program efficiency has been evolving, considering logistic, economic, social and environmental aspects, constantly optimized with measures to increase control. (author)

  1. Energy conservation and production from solid residues - alternative for two problems: wastes and energy; Conservacao e producao de energia a partir de residuos solidos - alternativa para dois problemas: lixo e energia

    Energy Technology Data Exchange (ETDEWEB)

    Reno, Francisco de Assis Grillo [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Planejamento de Sistemas Energeticos]. E-mail: fgrillo@fem.unicamp.br; Streb, Cleci Schalemberger [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica; Piunti, Regina Celia [Universidade Estadual de Campinas, SP (Brazil)]. E-mail: repiunti@ig.com.br

    2002-07-01

    This paper explores possibilities of energy conservation and production through the using domestic solid residues, aiming the disposal impacts and improvement the energy supplying as well. For energy conservation,the recycling, reduction and re utilization will be mentioned. For the energy recovering the burning of organic material in sanitary landfill and incineration of plastics and tires.

  2. Energy from briquettes produced from remains of urban solid residues and wood of Eucalyptus grandis; Energia de briquetes produzidos com rejeitos de residuos solidos urbanos e madeira de Eucalyptus grandis

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, Jose E.; Leao, Alcides L. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil). Dept. de Ciencias Ambientais], emails: evaristo@fca.unesp.br, alcidesleao@fca.unesp.br; Sartori, Maria M.P. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Bauru, SP (Brazil). Dept. de Engenharia de Producao], email: msartori@btu.flash.tv.br

    2009-07-01

    The incentive for consumption and production in large quantity in modern society generates enormous amounts of urban solid residues in the form of municipal solid waste (MSW). With the intention of reducing these residues of the municipal waste tips and to generate energy, briquettes with mixtures of MSW and residues of Eucalyptus grandis were produced. The briquettes were manufactured with 0, 5, 10, 15, 20 and 25% of MSW in the mixture with wood waste and 12% of moisture content. The analyzed parameters used to choose the best treatments were combustion analysis versus ash content, mechanical strength and energy content. The briquettes up to 10% of MSW showed low resistance, and above 15% showed large increase in ash content. Therefore, the treatment that fulfilled the requirements for combustion versus ash content and mechanical resistance was of at least 15% of MSW, since the source of the ash is unidentified. Considering the net energy content, the best treatment was 25% of MSW, with 17,175 kJ kg{sup -1}. Nevertheless, it is strongly advised that further studies related to gas emissions are necessary. (author)

  3. Diagnosis of solid waste of oil and natural gas exploration and production activities in Brazil offshore sedimentary basins; Diagnostico dos residuos solidos das atividades de exploracao e producao de petroleo e gas natural em bacias sedimentares maritimas no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, Pedro Henrique Wisniewski; Mendonca; Gilberto Moraes de

    2012-07-01

    The objective of this study is to analyze the generation and disposal of solid waste from the exploration and production activities of oil and natural gas in Brazilian waters. We used data from the implementation reports of pollution control project of the activities licensed by IBAMA. During 2009 the activities related to exploration and production of offshore oil and gas produced a total of 44,437 tons of solid waste, with the main waste generated corresponding to: oily waste (16,002 t); Metal uncontaminated (11,085 t); contaminated waste (5630 t), non recycling waste (4935 t); Wood uncontaminated (1,861 t), chemicals (1,146 t). Considering the total waste generated by activities during the period analyzed, it was observed that 54.3% are made up of waste Class I (hazardous waste), 27.9% of Class II wastes (waste non-hazardous non-inert); and 17.8% of waste Class IIB (non-hazardous and inert waste). The results obtained in this work enabled the scenario of waste generation by the E and P offshore activities. As a result, the survey serves as a starting point for monitoring the progress in implementing the projects sought Pollution Control of licensed projects, as well as support the monitoring of reflexes arising from the intensification of activities in certain regions. (author)

  4. Developing of methodological use for urban solid wastes analysis in EU. The case of Bilbao (Spain); Desarrollo de una herramienta metodologica normalizada para el analisis de residuos solidos urbanos en la Union Europea. Caso practico: analisis de RSU en Bilbao

    Energy Technology Data Exchange (ETDEWEB)

    MIguel, R.; Gonzalez, A.; Delgado, C.

    2003-07-01

    Despite the growing needs at a local/regional and international levels for accurate and comparable data on municipal waste impact and composition, so far it has not been possible to develop one uniform tool within the European Union for acquiring the relevant information for waste management planning and monitoring. The purpose of the S.W.A. Tool Project, funded by the EC, is to develop a set of standardised methodologies to assist in the formulation and implementation of waste analyses, so as to enhance data accuracy and comparability. The S.W.A.-Tool Consortium involves various European partners from seven cities (Berlin, Germany, Bilbao, Spain, Brescia, Italy. Newcastle upon Type, U. K., Vienna, Austria, Cracow, Poland, Brasov, Romania) and from a wide range of backgrounds in municipal waste management. At the research phase, a standardised methodological tool was developed to define statistical standards, to establish a standardised sorting catalogue and guidelines for selection level of random samples and stratification of the parent statistical population and the selection criteria to enable the user to choose the most appropriate analysis design for their specific objectives and circumstances. (Author)

  5. Characterization of fly ashes from a municipal solid waste incinerator to explore its using in construction; Caracterizacion de cenizas procedentes de plantas de incineracion de residuos solidos urbanos para su posible utilizacion en construccion

    Energy Technology Data Exchange (ETDEWEB)

    Alaejos Gutierrez, M. P.

    2002-07-01

    The paper describes the physical and chemical characterization of fly ashes from municipal solid waste incinerator. The objective is to explore potential applications of this residue in construction products. The results show the no pozzolanic nature of the fly ashes, so its utilization as mineral admixture is discarded. however, the study reveals the expansive character of the fly ashes when are mixed with water. The results of X-ray diffraction confirm the presence of metallic aluminium in the fly ash as the origin of this expansion. This chemical reaction generates a considerable amount of hydrogen, inflammable gas. Three ways to avoid this reaction are proposed. On the other way, the expansive behaviour of the fly ashes allow to explore its possible application to produce cellular mortars, as the traditional production of these mortars have several similarities with the reaction of fly ash and water. (Author) 9 refs.

  6. Desiccation of sludges as instruments for solid radioactive wastes reduction; Planta de desecado de concentrados de evaporador y lodos como instrumento basico para la reduccion de residuos radiactivos solidos

    Energy Technology Data Exchange (ETDEWEB)

    Perez, C.

    2003-07-01

    In order to maintain as well as possible and optimize use of the radioactive waste storage capacity of El Carbil ENRESA and the Electric Sector put a series of actions into motion in 1994 to reduce and optimize radioactive waste processing. As a result of this strategy, a moist waste desiccation system has been developed with Spanish technology by ENSA. This system was installed in Trillo NPP in 2001 and has operated satisfactorily for the past year, having significantly reduced the volume of waste generated by evaporator concentrates. This article describes the objectives, design and implementation of the desiccation system installed in Trillo NPP. (Author)

  7. Characterization of solid wastes from kraft pulp industry for ceramic materials development purposes; Caracterizacao de residuos solidos da industria de celulose tipo kraft visando sua aplicacao no desenvolvimento de materiais ceramicos

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, L.R.; Francisco, M.A.C.O.; Sagrillo, V.P.D.; Louzada, D.M.; Entringer, J.M.S. [Instituto Federal do Espirito Santo (IFES), Vitoria, ES (Brazil)

    2016-07-01

    The Kraft pulp industry generates a large amount of solid wastes. Due this large quantity, the target of this study is characterize inorganic solid wastes, dregs, grits and lime mud, from the step of reagents recovery of Kraft process, aiming evaluate the potentiality of their use as alternative raw material on development of ceramic materials. Initially, the wastes were dried and ground, then they were subjected to the following characterization techniques: pH analysis, particle size analysis, X ray fluorescence, X ray diffraction, differential thermal analysis and thermogravimetric analysis and scanning electron microscopy. According to the results, it may be concluded that these wastes could be used as raw material in production of red ceramic and luting materials. (author)

  8. Obtaining calcium silicates by using solid residues as precursors. Influence of water in the process of mixing reagents; Obtencin de silicatos de calcio empleando como precursores residuos solidos. Influencia del mezclado de reactivos en fase seca o fase humeda

    Energy Technology Data Exchange (ETDEWEB)

    Felipe-Sese, M.; Eliche-Quesada, D.; Corpas-Iglesias, F. A.

    2011-07-01

    The suitability of re-using residues marble, remaining from cutting marble, as a source of calcium-oxide, as well as the resultant ashes from the combustion of the wastes generated in the process of manufacturing boards from derivates of wood, as a source of silica, as raw material for the production of calcium silicate products has been determined. First of all, the influence of water has been studied in the initial phase of mixing residues. Marble and ashes have been mixed in molar relation CaO:SiO{sub 2} of 1:1 using two different ways: using a planetary ball mill (while in solid state) or agitating at 90 degree centigrade (2 h) using a 60 wt% of water (while in humid state). Later, both mixtures were sintered at 1100 degree centigrade (24 h). In order to use the obtained calcium-silicates as ceramic insulating thermal materials, the samples were compressed at 15 Tm obtaining bricks from which the technological properties have been studied. The ceramic materials obtained from mixing the residues in dry phase, as well as those obtained in the wet phase, can be used as thermal insulators, showing values of conductivity of 0.18 and 0.12 w/m{sup 2}K, with an elevated resistance to compressive strength. (Author) 14 refs.

  9. Calibration factor determination for solid nuclear track detectors CR-39 type exposed to Rn-222; Determinacao do fator de calibracao para detectores solidos de tracos nucleares tipo CR-39 expostos a Rn-222

    Energy Technology Data Exchange (ETDEWEB)

    Cazula, Camila Dias; Campos, Marcia Pires de; Mazzilli, Barbara Paci, E-mail: cdcazula@ipen.br, E-mail: mpcampos@ipen.br, E-mail: mazzilli@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    In the detection method with solid nuclear track detector, when a heavy particle rests on the detector surface, causes a breakdown in their molecular structure forming a trace. One of the typical applications of these detectors is the measurement of the concentration of Rn -222 in air, a noble radioactive gas, part of the U-238 series, emitting alpha particles and important in epidemiological studies to protect individuals from natural radiation. To determine the concentration of Rn -222 in the air in a room is necessary to know the density of lines (traces / cm{sup 2}) on the detector surface, the exposure time and the calibration factor. The determination of the calibration factor for CR-39 detectors was taken from the exposure of these to a known concentration of Rn-222. Therefore, the detectors were placed inside a cell of Lucas adapted and subsequently exposed to a concentration of Rn-222 15 kBq / m{sup 3}, by means of the apparatus RN-150 Pylon Electronics Incorporation, which has a source of Ra-226 and releases known concentrations of Rn-222. Six calibration factor determinations were performed, the average value obtained was 0.0534 ±0.0021 (traces / cm{sup 2} per Bq / m{sup 3} day). The results are consistent with literature values for the same type of detector and showed good reproducibility.

  10. Determination of the solid consumption in the transport of sands in sea beds with gold 198; Determinacion del gasto solido en el transporte de arenas en lechos marinos con oro 198

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez A, G

    1983-07-01

    The study of the movement of sediments in sea beds, is necessary when one plans to build a port. Among the techniques used for this studies, it is the radiotracer balance that gives an useful estimation of the quantity of sediment that it moves per day and by meter (perpendicular to the displacement). The main objectives of this work are: to) to present the characteristics of the obtaining of the used radiotracer, describing details those used safety measures, b) to describe the handling of the radiotracer and it radiological safety, during the transport and injection in the sea bottom, c) description of the detection way and the used equipment, d) to describe the information processing obtained in the field and finally, e) the estimate of the solid consumption and the determination of the direction and speed of displacement of those sediments in the sea bottom, in front of the Tabasco coast, to be used jointly with the information obtained by means of other techniques so that one can make a good planning of the operations of dredging during the construction and later on the maintenance of the Dos Bocas marine terminal. The first step is to obtain the radiotracer that in this case was sand of uniform grain metric, marked superficially with Gold-198. The second step is to transport the sand to the place of interest, to place it in the injection equipment and to deposit it in the sea bottom. The third step is to detect the radiotracer in the sea bed, from a craft that drags a sled, which takes mounted a scintillation detector of sodium iodide activated with thallium NaI(Tl) (probe). The fourth step is to process the field information and to obtain the corresponding results. (Author)

  11. Development of materials for use in solid oxid fuel cells anodes using renewable fuels in direct operation; Desenvolvimento de materiais ceramicos aplicados em anodos de celulas a combustivel de oxidos solidos para operacao direta com combustiveis renovaveis

    Energy Technology Data Exchange (ETDEWEB)

    Lima, D.B.P.L. de [Instituto Federal do Parana (IFPR), PR (Brazil); Florio, D.Z. de; Bezerra, M.E.O., E-mail: daniela.bianchi@ifpr.edu.br [Universidade Federal do ABC (UFABC), Santo Andre, SP (Brazil)

    2016-07-01

    Fuel cells produce electrical current from the electrochemical combustion of a gas or liquid (H2, CH4, C2H5OH, CH3OH, etc.) inserted into the anode cell. An important class of fuel cells is the SOFC (Solid Oxide Cell Fuel). It has a ceramic electrolyte that transports protons (H +) or O-2 ions and operating at high temperatures (500-1000 °C) and mixed conductive electrodes (ionic and electronic) ceramics or cermets. This work aims to develop anodes for fuel cells of solid oxide (SOFC) in order to direct operations with renewable fuels and strategic for the country (such as bioethanol and biogas). In this context, it becomes important to study in relation to the ceramic materials, especially those that must be used in high temperatures. Some types of double perovskites such as Sr2MgMoO6 (or simply SMMO) have been used as anodes in SOFC. In this study were synthesized by the polymeric precursor method, analyzed and characterized different ceramic samples of families SMMO, doped with Nb, this is: Sr2 (MgMo)1-xNbxO6 with 0 ≤ x ≤ 0.2. The materials produced were characterized by various techniques such as, thermal analysis, X-ray diffraction and scanning electron microscopy, and electrical properties determined by dc and ac measurements in a wide range of temperature, frequency and partial pressure of oxygen. The results of this work will contribute to a better understanding of advanced ceramic properties with mixed driving (electronic and ionic) and contribute to the advancement of SOFC technology operating directly with renewable fuels. (author)

  12. Methodology to evaluate the energy associated to the industrial solid wastes: application in a metropolitan region of Campinas, Sao Paulo state, Brazil; Metodologia para avaliacao da energia associada ao residuo solido industrial: aplicacao a regiao metropolitada de Campinas

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Tereza Rosana Orrico [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Curso de Pos-graduacao em Planejamento de Sistemas Energeticos; Teixeira, Egle Novaes [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo; Silva, Ennio Peres da [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico. Lab. de Hidrogenio

    2004-07-01

    The aim of this work is to the application of a methodology to evaluate the energy associated to the industrial solid wastes in the metropolitan region of Campinas. The methodological route proposed is: the characterization of the research area and the production/management of the industrial solid wastes; the energetic classification and the qualitative/quantitative research of the energy associated to the industrial solid wastes; and, the valuation of the applicability of the energetic utilization mechanisms proposed to the region. This methodology when applied at the Campinas metropolitan region proved to be valid and it resulted in a synthetically presentation of the social and environmental reality of the industrial sector and the destination of the wastes, as well as it indicated the potentialities related to the energetic utilization of the industrial solid waste in the region. With the obtained results it was shown the importance of the the production and the destination of the industrial solid wastes in the Campinas metropolitan region , and the meaning, in terms of electric potency, of the values of the energy associated to the wastes with a known factor of energetic conversion shown in the researched sample. (author)

  13. The ferrous ammonium sulfate solid system, as dosemeter for processes at low temperatures and high doses of gamma radiation; El sistema sulfato ferroso amoniacal solido, como dosimetro para procesos a bajas temperaturas y altas dosis de radiacion gamma

    Energy Technology Data Exchange (ETDEWEB)

    Juarez C, J.M.; Ramos B, S.; Negron M, A. [ICN-UNAM, 04510 Mexico D.F. (Mexico)

    2005-07-01

    This paper presents the results obtained from a study of the radiation induced oxidation of crystalline ferrous ammonium sulfate with gamma rays at 295 K, 263 K and 77 K and dose from 0 to 300 kGy. The radiation induced decomposition of ferrous ammonium sulfate has been studied by the dissolution of the irradiated salt in 0,8 N sulfuric acid. The main product is Fe{sup 3+} and molar concentration of ferric ion was determined spectrophotometrically in the UV region at 304 nm. The optical density values showed a linear dependence with dose, indicating that the data obtained might be used to create a calibrating curve. Color in irradiated salt changes from blue to green, yellow and orange according to the absorbed dose. The accuracy and the reproducibility of the system were tested. In addition, some other characteristics make possible the use of this system as a dosimeter, similar to Fricke chemical dosemeter, at low temperatures and high dose. (Author)

  14. Anaerobic co-digestion cassava wastewater and crude glycerin for removal of COD and solid; Co-digestao anaerobica de manipueira e glicerina bruta para remocao de DQO e solidos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Jefferson L.G.; Guerra Junior, Joao B. [Universidade Estadual do Oeste do Parana (UNIOESTE), Cascavel, PR (Brazil)], E-mail: j.lg11@yahoo.com.br; Gomes, Simone D.; Mallmann, Larissa S. [Universidade Estadual do Oeste do Parana (CCET/PGEAGRI/UNIOESTE), Cascavel, PR (Brazil). Dept. de Recursos Hidricos e Saneamento Ambiental

    2012-11-01

    To be discarded into the environment, cassava wastewater, generated during the processing of the cassava root, needs to be dealt with trying to reduce its organic load and total solids, harmful to water bodies. As for crude glycerin, a byproduct of biodiesel production, need alternatives to its destination, because the cost to its purification is often not feasible, preventing its use by pharmaceutical and food industries. In this study we chose to anaerobic digestion to treat manipueira assessing the behavior of the reactor with the addition of glycerin. The reactor was constructed of PVC with 60cm long, 20cm in diameter and a volume of 8.38 L, and HRT was 5 days. Three treatments were applied: T1, only manipueira, T2 with 0.25% glycerol and T3, with 0.50%. The three treatments showed a great reduction of organic load (above 90%) and higher with the addition of 0.25% crude glycerine. The highest mean removal of solids and total volatile solids occurred in treatment with 0.50% crude glycerine, being 84.18% and 91.41% respectively. (author)

  15. Solid-liquid equilibrium data acquisitions for paraffin systems through thermometry and thermodynamic modeling with modified UNIFAC; Obtencao de dados de equilibrio solido-liquido para sistemas parafinicos via termometria e modelagem termodinamica com UNIFAC modificado

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa Junior, Wellington; Queiroga, Renan Nobrega Gadelha; Nascimento, Mairon Antonio Hosannah do; Souza, Carlson Pereira de; Chiavone-Filho, Osvaldo [Rio Grande do Norte Univ., Natal, RN (Brazil). Programa de Pos-graduacao em Engenharia Quimica]. E-mail: wbjunior@eq.ufrn.br

    2003-07-01

    In the petroleum industry a great problem found is the formation of solids during the production, transport and the storage, which are mainly paraffins. It was mainly used the thermometry for determination of paraffin formation, or the solubility of paraffin in the other hydrocarbon solvent as function of the composition. The gas chromatography was used to determine if the system light hydrocarbon and paraffin form solid solution, applying a simplified analytical method with thermostatized filtration and glass syringe. The experimental data obtained was used with the aid of the modified UNIFAC model for representing both the liquid and solid solution phases in equilibrium. (author)

  16. The attitude of user in the solid urban wastes management: the EMULSA topic; Actitud de los usuarios ante la gestion de los residuos solidos urbanos el caso de emulsa- Gijon

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez Barcala, M.; Junquera Cimadevilla, B.; MuNiz Torre, M.

    1996-12-01

    Governments in the world are pressed more and more nowadays to manage completely the environmental subject. Nevertheless, it is Firstly necessary to analyze the attitudes of the citizens to these problems. In accordance with this aim, we achieved such study in Gijon (Asturias, spain). In this one, we have discovered a very important predisposition of the people to collaborate and to support certain actions of the municipal firm in works about selective retirement of waste. Besides, we have found that the more conscious citizens with the environmental problems are too ones more disposed to collaborate. Nevertheless, we have verified that workers and managers in this municipal firm are pessimistic about the citizens behavior. (Author)

  17. Factors which determine the utilization of urban solid residue in vapor and electric power generation; Fatores que condicionam o aproveitamento dos residuos solidos urbanos nas geracoes eletricas e de vapor

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Flavio B.; Sanchez, Wladimyr [Companhia Energetica de Sao Paulo, SP (Brazil)

    1991-12-31

    this work describes the main aspects concerning the utilization of urban solid residues in electric power and vapor generation such as: the transportation of the solid residues; the strategic factors which should be considered for the success of the plant; economic and financial analysis; and environmental impacts 5 refs., 2 figs.

  18. The urban solid wastes in La Habana (Cuba): management diagnostics and alternatives for their improvement; Los residuos solidos urbanos en la ciudad de La Habana: Diagnostico de la gestion y alternativas para su aprovechamiento

    Energy Technology Data Exchange (ETDEWEB)

    Ponjuan Reyes, G. T. [Univsersidad de Las Palmas de Gran Canaria (Spain)

    1999-11-01

    In this study, it is carried out a diagnosis of all the looks of the Systems of Administration of the R. S. U. in the country of Ciudad de la Habana and they propose alternating for the economical development of the R. S. U. in the county, starting from classifying and study the actions according to the politics of the country concerning the protection of the 2environment and the saving of natural resources. (Author) 22 refs.

  19. Study of the environmental effects of sanitary landfill in Pinto, Madrid (Spain); Estudio de la influencia del vertedero de residuos solidos urbanos de Pinto (Comunidad de Madrid) y su entorno

    Energy Technology Data Exchange (ETDEWEB)

    Dorronsoro, J.L.; Carreras, N.; Sanchez, D.M.; Quejido, A.; Sanchez, M.; Herranz, I.; Fernandez, M.E.

    1996-10-01

    Here we report the results obtained in the studies of the environmental affection of a municipal solid waste (MSW) Landfill (Pinto, spain). For this purpose samples of waters, soils, sediments, vegetation and leachates were analyzed during three years (1990-1993). The results do not indicate environmental affection, due to the favourable situation (low permeability and runoff and low population density) of the landfill.

  20. Identification and separation of polymers and plastics from urban solid wastes for their recycling; Identificacion y sepracion de polimeros y plasticos procedentes de residuos solidos urbanos para su reciclado

    Energy Technology Data Exchange (ETDEWEB)

    Larrauri, E.; Miguel, R.; Noll, R.; Sttamann, R.; Couris, S.; Hatziapostolou, A.

    1997-09-01

    Laser-induce breakdown spectroscopy (LIBS) is investigated for the identification of the polymers PE,PP,PET and PVC. About 10 spectral features are measured, e.g. spectral lines of carbon, hydrogen and chlorine and emission bands of C{sub 2}. The intensities are evaluated with multivariate statistical analysis and neural networks. Identification accuracies of approx 99% for PVC and PET are achieved. The measuring time for an identification is less than 100 {mu}s. An autofocus system for the focusing of the laser beam onto bottles with varying geometry and for plasma imaging has been assembled and tested with coloured samples. A handling device for the singularization, transport and sorting of waste bottles has been assembled, allowing sorting rates of up to 3 bottles/s. An assessment for the feasibility of industrial-scale sorting machines is given. (Author) 7 refs.

  1. The effect of application of compost from urban solid wastes on the properties of agricola soil; Efecto de la aplicacion de compost de residuos solidos urbanos sobre las propiedades de un suelo agricola

    Energy Technology Data Exchange (ETDEWEB)

    Garci-Gil, J. C.; Soler-Rovira, P.; Alonso, N.; Diaz-Marcote, I.; Polo, A. [C.S.I.C. Madrid (Spain)

    1999-08-01

    A long-term field experiment was conducted to determine the effect of the addition of municipal solid waste (MSW) compost applied at two different rates on a barley crop. In all treatments, values obtained for plants overall weights show increases in comparison to the control, especially with the higher rate of compost. The contents of macronutients in plants were similar in all the treatments. only N showed an increase in both grain and straw with the higher rate of compost during the years of consecutive applications. No heavy metal contamination was observed in plants, but in the compost treatments the contents of Zn increased while Mn decreased. (Author)

  2. Comparison of two dosimetric protocols in water and solid phantoms for electron beams in an extension cone; Comparacion de dos protocolos dosimetricos en fantomas de agua y solido para haces de electrones en un cono de extension

    Energy Technology Data Exchange (ETDEWEB)

    Genis S, R.; Garcia C, C.; Martinez A, M. [Departamento de radioterapia, Hospital Medica Sur, Puente de Piedra 150, Col. Toriello Guerra, 14050 Mexico DF (Mexico)

    1998-12-31

    The objective of this work is to realize the dosimetry for an extension cone for electron beams and proposing a simple and reliable procedure for this purpose. Clinically it was sufficient to employ an energy not greater than 9 MeV, by the clinical conditions of the leisure. It was had nominally 6 or 9 MeV and it was decided to employ the second energy. This cone was elaborated for special cases that by the anatomical position of the leisure, it is not allowed the easy access with the usual cones. (Author)

  3. Development and testing of the proton exchange membrane fuel cell (PEMFC) for stationary generation; Desenvolvimento e ensaios de uma celula a combustivel de polimero solido (PEMFC) para geracao estacionaria

    Energy Technology Data Exchange (ETDEWEB)

    Ellern, Mara; Boccuzzi, Cyro Vicente [ELETROPAULO, Sao Caetano, SP (Brazil)], e-mail: mara.ellern@aes.com; Ett, Gerhard; Saiki, Gerson Yukio; Janolio, Gilberto [ELECTROCELL, Sao Paulo, SP (Brazil); Jardini, Jose Antonio [Universidade de Sao Paulo (USP), SP (Brazil)

    2004-07-01

    PEM (Proton Exchange Membrane) fuel cell uses a simple chemical reaction to combine hydrogen and oxygen into water, producing electric current in the process. It works something like reversed electrolysis: at the anode, hydrogen molecules give up electrons, forming hydrogen ions (this process is made possible by the platinum catalyst). The proton exchange membrane allows protons to flow through, but not electrons. As a result, the hydrogen ions flow directly through the proton exchange membrane to the cathode, while the electrons flow through an external circuit. As they travel to the cathode through the external circuit, the electrons produce electrical current. At the cathode, the electrons and hydrogen ions combine with oxygen to form water. In a fuel cell, hydrogen's natural tendency to oxidize and form water produces electricity and useful work. No pollution is produced and the only byproducts are water and heat. The huge advance on materials development combined with the growth demand of lower impact on environment is placing the fuel cells on the top of the most promising technologies world-wide. They are becoming in medium term feasible alternatives for energy generators up to energy plants of few MW. (author)

  4. Solid wastes: its narrow links with the energetic questions and its implications with social and environmental aspects; Os residuos solidos: suas relacoes com a questao energetica e suas implicacoes socio-ambientais

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Paulo Jorge Moraes [Universidade Metodista de Piracicaba, SP (Brazil). Dept. de Engenharia Mecanica

    1994-07-15

    This paper deals with the questions of solid wastes face the energetic, social and environmental problems nowadays. It evaluates some relevant characteristics related to dynamics of wastes, and it points out to necessity of an integrated and wide approach as the way of understanding and guiding the resolution of these problems. (author)

  5. Study of a hybrid system using solid oxide fuel cells (SOFC) and gas turbine; Estudo de um sistema hibrido empregando celula de combustivel de oxido solido (SOFC) e turbina a gas

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Antonio Carlos Caetano de; Gallo, Giulliano Batelochi; Silveira, Jose Luz [UNESP, Guaratingueta, SP (Brazil). Faculdade de Engenharia. Dept. de Energia], e-mail: caetano@feg.unesp.br

    2004-07-01

    In this paper a hybrid solid oxide fuel cell (SOFC) system, applying a combined cycle using gas turbine for rational decentralized energy production is analyzed. The relative concepts about the fuel cell are presented, followed by some chemical and technical information such as the change of Gibbs free energy in isothermal fuel oxidation directly into electricity. This represents a very high fraction of the lower heating value (LHV) of a hydrocarbon fuel. In the next step a methodology for the study of SOFC and gas turbine system is developed, considering the electricity and steam production for a hospital. This methodology is applied to energetic analysis. Natural gas is considered as a fuel. A Sankey Diagram shows that the hybrid SOFC system is a good opportunity to strengthen the decentralized energy production in Brazil. It is necessary to consider that the cogeneration in this version also is a good technical alternative, demanding special methods of design, equipment selection and contractual deals associated to electricity and fuel supply. (author)

  6. Calculo de funciones de onda lcao para el estado fundamental de solidos. aplicación al estudio teórico de la estructura de los cristales de litio y de nitruro de boro. I.

    Directory of Open Access Journals (Sweden)

    Nepomuceno Quitian C.

    2009-07-01

    Full Text Available En esta primera publicación se ha aplicado el formulismo de la Química Cuántica del Estado Sólido, al estudio teórico de los cristales de Litio y de Nitruro de Boro, utilizando una base de funciones Gausianas dentro del método LCAO— SCF—MO (Linear Combination of Atomic Orbitals- Self Consistent Fields – Molecular Orbltals. Se calculan los factores de estructura teóricos a partir de los elementos de la matriz de densidad y las integrales de recubrimiento Generalizadas. Se calcula igualmente la densidad electrónica y una función delta (A a partir de los factores de estructura teóricos, con el fin de poner en evidencia la unión Química.

  7. Synthesis and characterization of tungsten carbide doped cobalt via gas-solid reaction in rotary bed reactor; Sintese e caracterizacao de carbeto de tungstenio dopado com cobalto via reacao gas-solido em reator de leito rotativo

    Energy Technology Data Exchange (ETDEWEB)

    Tertuliano, R.S.C.; Araujo, C.P.B. de; Frota, A.V.V.M.; Moriyama, A.L.L.; Souza, C.P. de, E-mail: ruasavio@hotmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Departamento de Engenharia Quimica

    2016-07-01

    The search for materials with high added value, high applicability and sustainability, motivates innovations in all areas of engineering. In this context, so-called doped carbides, ceramic and metal compounds are included. This work proposes the synthesis and characterization of tungsten carbide doped cobalt (WC-Co) through the gas-solid reaction in a rotating bed reactor. The production stages of the material are: precursor synthesis by wetting, drying at 80 deg C, characterization of the precursor by MEV, DRX and FRX, gas-solid reaction at 750 deg C in a reducing atmosphere of CH{sub 4} / H{sub 2} in a rotary reactor at 34 rpm and characterization of the reaction product by the techniques already mentioned. The results showed that tungsten carbide powders were produced with cobalt inserted into the structure, with high surface area, nanometric grains and with potential for applications in the areas of catalysis, reactors and fuel cells, showing the relevance of this type of research.

  8. OPTIMIZACION DEL PROCESO DE COMPOSTAJE AEROBICO DE RESIDUOS SOLIDOS PROVENIENTES DE LA INDUSTRIA DE CELULOSA KRAFT Y SU EFECTO EN EL CRECIMIENTO EN VIVERO DE PLANTAS DE PINUS RADIATA D.DON

    OpenAIRE

    ZAMBRANO RIQUELME, MARCIA ANDREA; ZAMBRANO RIQUELME, MARCIA ANDREA

    2007-01-01

    La producción de pulpa blanqueada genera lodo secundario proveniente del tratamiento aerobio de residuos líquidos de la misma industria. Estos residuos comprenden: biomasa, fibras de celulosa y derivados de sustancias de la madera lentamente biodegradable (tales como lignina). Los residuos inorgánicos por su parte, incluyen cenizas producidas en la caldera de poder, dregs originados durante el proceso de caustificación y corteza procedente del descortezado de madera. Estos residuos s...

  9. Time evaluation of discharges of suspension solids in the treated acid waters from the Osamu Utsumi - INB - Brazil; Avaliacao temporal das descargas de solidos em suspensao nas aguas acidas tratadas da mina Osamu Utsumi/INB

    Energy Technology Data Exchange (ETDEWEB)

    Maculan, Gabriella Giarola [Universidade Federal de Alfenas (UNIFAL), Pocos de caldas, MG (Brazil); Alberti, Heber Luiz Caponi, E-mail: heber@cnen.gov.br [Comissao Nacional de Energia Nuclear (LAPOC/CNEN), Pocos de Caldas, MG (Brazil). Laboratorio de Pocos de Caldas

    2011-07-01

    The present work presents only the flow and mass variations of particles on the the treated water at the points of interface with the environment. The region presents two very well established stations (dry and rainy), and the generated flows also presented oscillations as function of the hydrological year. The full knowledge of the hydrological fluxes involved in the Mine Acid Draining generation is essential for the elaboration of solutions aiming to minimize the environmental and costs impacts associated to the environmental passive generated by uranium mining

  10. Synthesis of BZN-(α) and BZN-(β) pyrochloric ceramics by the solid state relation; Sintese das ceramicas pirocloricas BZN-α e BZN-β pela relacao em estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Farias, F.C.; Alves, A.G.; Alves, Y.M.; Pereira, F.M.M.; Barroso, M.B., E-mail: werleyfarias@gmail.com [Universidade Federal do Cariri (UFCA), Juazeiro do Norte, CE (Brazil); Pereira, C.A.; Saraiva, I.R. [Faculdade DeVry Fanor (FANOR), Fortaleza, CE (Brazil); Conde, W.S.; Sombra, A.B. [Laboratorio de Telecomunicacoes e Ciencia e Engenharia de Materiais (LOCEM), CE (Brazil)

    2016-07-01

    The ceramics the base of Bi{sub 2}O{sub 3}-ZnO-Nb{sub 2}O{sub 5} (BZN) have two main phases, Bi{sub 1,5}ZnNb{sub 1,5}O{sub 7} (α) and Bi{sub 2}Zn{sub 2/3}Nb{sub 4/3}O{sub 7} (β) with cubic and monoclinic crystal structures, respectively. This study was aimed to summarize the BZN-α phase and BZN-β chemically homogeneous and observe the phase transformations that occur in the system, using the ceramic method. They were characterized by scanning electron microscopy (SEM), X-Ray Diffraction (XRD), and the Rietveld method in structural refinement and Infrared Spectroscopy. The BZN-α phase is presented in pure sintering temperatures used, although BZN-β phase has brought the remaining stages of its formation process, as Bi{sub 5}Nb{sub 3}O{sub 15} and BiNbO{sub 4}. For BZN-α were observed absorptions at 469 and 328 cm{sup -1}, attributed to the metal-oxygen stretch the BZN-β showed absorption bands at wavelengths of 601, 515, 447 and 328 cm{sup -1}, also being assigned metal-oxygen bond. (author)

  11. Particle size distribution and total solids suspension in samples monitoring of capturing water for optimization of water injection filtration system; Monitoramento da quantidade de particulas e do total de solidos em suspensao em amostras de agua de captacao

    Energy Technology Data Exchange (ETDEWEB)

    Ramalhao, Adriano Gorga; Seno, Carlos Eduardo; Ribeiro, Alice [3M do Brasil, Sumare, SP (Brazil)

    2008-07-01

    There is a wide variation in the amount of particulate material in sea water by a great number of reasons. The most well-known contaminant is the organic material derived from seaweed or fish spawning causing seasonally sensitive variations in the water quality treated and injected for enhance oil recovery. This paper presents the results of one year the water monitoring form water sampled at 30 meters deep in the Roncador field, which is located 125 km from the coast with a depth of 1290 meters. It was observed the water seasonal variation with peaks in summer and winter. The monitoring was done through particle counting and distribution analysis and total solids in suspension. It was noted that even in peak with largest amount of particles and greater quantity of solid in suspension the particles had remained concentrated in the range bellow 25 {mu}m. For that reason the life of final filter elements may vary and pre-filters are many times ineffective and sometimes even bypassed due to frequent clogging and not to do the protecting job of the final filter. (author)

  12. Technical and economical analysis of the energy recovery during in incineration of urban solid residues; Analise tecnico-economica da recuperacao de energia durante a incineracao de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Flavio N.; Lora, Electo S.; Martins, Andre R.S. [Escola Federal de Engenharia de Itajuba, MG (Brazil). Dept. de Mecanica

    1999-07-01

    This work conducts a technical and economical evaluation on the energetic recovering of an incinerator with processing capacity of 600 t/h of urban solid residues, resulting from electric power generation (gas turbines) and cooling (absorption systems) using garbage and natural gas. The results allow the conclusion that besides the social and environmental benefits resulting from the elimination of the contamination potential, an electric energy surplus can be generated for inclusion in the Brazilian energy matrix.

  13. State of the art of composting plants treatment organic matter of urban solid wastes in Catalonia (II); Situacion actual de las plantas de compostaje que tratan la fraccion organica de los residuos solidos municipales en Cataluna (II)

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, L.; Faidella, L.; Gomez, A.; Ramirez, S.; Utrera, P.; Vergara, E. [Universidad Autonoma de Barcelona (Spain); Rieradevall, J.

    2000-07-01

    The analysis of designs has allowed some positive points and another aspects to improve in the centre working. The main proficient points are related with the suitable localisation, designs centres, compost quality and the management of process remnants. The future evolution of this type of treatment depends on the answer given to certain aspects that should improve. It's needful that the project makes suitable to the definite realities, the development of new application areas for compost and the search of social acceptance by means of reducing the associated impacts. Ah this process has to be done covered with a firm and clear normative. (Author) 10 refs.

  14. Synthesis and evaluation of ceramic materials for its application in fuel cells in solid state; Sintesis y evaluacion de materiales ceramicos para su aplicacion en celdas de combustible en estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Cortes Escobedo, Claudia Alicia

    2007-09-15

    A study is presented on the Lanthanum Manganite of (LaMnO{sub 3}) with structure perovsquita type and its potential use as cathode in fuel cells. The mecano-sintesis of lanthanum powder manganites is proposed as a method to maximize the defects, since punctual defects in these materials for applications of cathodes in fuel cells are required. Intrinsic precise defects were introduced in the lanthanum manganite mixing lanthanum oxide with manganese oxide (with different numbers of oxidation). In addition, extrinsic defects were introduced doping the of lanthanum manganites with 15 and 20% of strontium in lanthanum sites. A comparison between the final structural properties of the manganites obtained by different processes is presented: a) high energy milling in one pass in a SPEX8000 and thermal treatment, b) milling in two passes by milling of high energy in a SPEX8000D and thermal treatment and c) by thermal activation. A study is presented of the main variables that take part in the mecanosintesis technique, as the volumetric relations between the powders and balls, etc. the relation in weight between dusts and the balls, etc. Experiments of pre-consolidation of synthesized powders took place using vegetal starches of native maize, potatoes, wheat and waxy wheat. The best results were obtained with native maize starch considering the distribution of open micro porosity without losing the shape of the test tubes presented. The test tubes in green were sintered at 1000, 1100 and 1300 degrees Celsius. The largest grain size was obtained in samples processed to 1300 degrees Celsius and a greater open porosity at 1100 degrees Celsius. The measurement results of the electrical conductivity in all the doped samples of LaMnO{sub 3} and without doping were carried out from 70 to 1173 degrees Kelvinand showed values in the rank of 100-25 S/cm. The highest total conductivity was obtained for samples of manganites prepared from MnO with 20% of strontium in lanthanum sites and the minor for LaMnO{sub 3} prepared from MnO and without doping. The reactivity of the cathodes perovsquita type was studied with zirconium preparing mixtures 1:1 by weight of the ground of manganites of lanthanum with zirconium partially stabilized with yttrium and treated at 1000, 1100, 1200 and 1300 degrees Celsius. Almost all the resulting mixtures showed the formation of the compound type pyrocloride La{sub 2}Zr{sub 2}O{sub 7}, and in addition those doped with strontium also showed the presence of SrZrO{sub 3}. The formation of La{sub 2}Zr{sub 2}O{sub 7} was managed to avoid it in samples prepared from mixtures of MnO{sub 2} with atomic 15% atomic of Sr. these samples have a mixture of manganite phases and manganese. Finally, the stabilization of the cubical phase of the zirconium with manganite of lanthanum in all the mixtures was observed. [Spanish] Se presenta un estudio sobre la manganita de lantano (LaMnO{sub 3}) con estructura tipo perovsquita y su uso potencial como catodo en celdas de combustible. La mecanosintesis de polvo de manganitas de lantano se propone como un metodo para maximizar los defectos, ya que se requieren defectos puntuales en estos materiales para aplicaciones de catodos en celdas de combustible. Defectos puntuales intrinsecos fueron introducidos en la manganita de lantano mezclando oxido de lantano con oxido de manganeso (con diferentes numeros de oxidacion). Ademas se introdujeron defectos extrinsecos dopando las manganitas de lantano con 15 y 20% at de estroncio en sitios de lantano. Se presenta una comparacion entre las propiedades estructurales finales de las manganitas obtenidas por diferentes procesos: a) molienda de alta energia en un paso en un SPEX8000D, b) en dos pasos por molienda de alta energia en un SPEX8000 y tratamiento termico y c) por activacion termica. Se presenta un estudio de las principales variables que intervienen en la tecnica de mecanosintesis, como las relaciones volumetricas entre las bolas y los viales, la relacion en peso entre los polvos y las bolas, etc. Experimentos de preconsolidacion de los polvos sintetizados se efectuaron utilizando almidones vegetales de maiz nativo, papa, trigo y waxy. Los mejores resultados se obtuvieron con almidon de maiz nativo considerando la distribucion de micro porosidad abierta sin perder la forma de las probetas presentadas. Las probetas en verde se sinterizaron a 1000, 1100 y 1300 grados dentigrados. El tamano de grano mayor se obtuvo en muestras procesadas a 1300 grados centigrados y una mayor porosidad abierta a 1100 grados centigrados. Los resultados de la medicion de la conductividad electrica en todas las muestras de LaMnO{sub 3} dopadas y sin dopar se llevaron a cabo de 70 a 1173 grados Kelvin y mostraron valores en el rango de 100-25 S/cm. La conductividad total mayor se obtuvo para muestras de manganitas preparadas a partir de MnO con 20% de estroncio en sitios de lantano y la menor para LaMnO{sub 3} preparadas a partir de MnO y sin dopar. Se estudio la reactividad de los catodos tipo perovsquita con zirconio preparando mezclas 1:1 en peso de las mezclas molidas de manganitas de lantano con zirconio parcialmente estabilizada con ytria y tratadas termicamente a 1000, 1100, 1200 y 1300 grados centigrados. Casi todas las mezclas resultantes mostraron la formacion del compuesto tipo pirocloro La{sub 2}Zr{sub 2}O{sub 7}, y ademas aquellas dopadas con estroncio tambien mostraron la presencia de SrZrO{sub 3}. La formacion de La{sub 2}Zr{sub 2}O{sub 7} se logro evitar en muestras preparadas a partir de mezclas de MnO{sub 2} con 15% atomico de Sr. Estas muestras tienen mezcla de fases de manganita y manganato. Finalmente, se observo la estabilizacion de la fase cubica del zirconio con manganita de lantano en todas las mezclas.

  15. Spectroscopic studies of composite obtained from solid state reaction between a mononuclear vanadium(IV) complex and kaolinite; Estudo espectroscopico de composito obtido da reacao no estado solido entre um complexo mononuclear de vanadio(IV) e caulinita

    Energy Technology Data Exchange (ETDEWEB)

    Rezende, Edivaltris I.P. de; Mangrich, Antonio S.; Mangoni, Ana P. [Departamento de Quimica, Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil); Scarpellini, Marciela; Casellato, Annelise; Fernandez, Tatiana L. [Departamento de Quimica Inorganica, Instituto de Quimica, Universidade Federal do Rio de Janeiro, RJ (Brazil)

    2012-07-01

    The use of probes, such as paramagnetic species diluted in diamagnetic materials in EPR spectroscopy, and mathematical tools such, as the Kubelka-Munk function in DRUV-VIS spectroscopy are strategies in the analysis of complex mixtures of solid materials. The results obtained here show that the solid state reaction between the complex, [VO(acac)(BMIMAPY)] [ClO{sub 4}], BMIMAPY = [(bis(1-methylimidazole-2-yl)methyl)(2-(pyridyl-2-yl)ethyl) amine] and acac = acetilacetonate, with kaolinite turns possible to obtain anisotropic EPR spectrum of the complex with a reasonable level of resolution. The study by DRUV-VIS using the method of second derivative mode of the Kubelka-Munk function revealed new complex structural arrangements, a solid hitherto unknown. (author)

  16. In vivo and high resolution spectroscopy in solids by NMR: an instrument for transgenic plants study; Espectroscopia `in vivo` e de alta resolucao em solidos por RMN: uma ferramenta para o estudo de plantas transgenicas

    Energy Technology Data Exchange (ETDEWEB)

    Colnago, L.A.; Herrmann, P.S.P.; Bernardes Filho, R. [EMBRAPA (Brazil). Centro Nacional de Pesquisa de Defesa da Agricultura; Bonagamba, T.J.; Panepucci, H. [Sao Paulo Univ., Sao Carlos, SP (Brazil). Inst. de Fisica; Carneiro, M.; Rodrigues, C.A. [EMBRAPA (CENARGEN) (Brazil)

    1995-12-31

    This work has developed a study on transgenic plants using two different techniques of nuclear magnetic resonance, in vivo NMR and high resolution NMR. In order to understand the gene mutations and characterize the plants constituents, NMR spectral data were analysed and discussed, then the results were presented 2 refs., 4 figs.

  17. Application of cooling with solid dissecants in solar heating and heating water systems; Aplicacion de la refrigeracion con desecantes solidos en sistemas solares de calefaccion y agua caliente sanitaria

    Energy Technology Data Exchange (ETDEWEB)

    Carrillo Andres, A.; Cejudo Lopez, J. M.; Dominguez Munoz, F.; Serrano Casares, F.

    2004-07-01

    Solar thermal systems designed for domestic hot water and space heating, must be dimensioned on a larger scale than for purely domestic hot water. In summer, when there are many days when no heating is required, the oversized collector area leads to frequent stagnancy situations. In order to use the excess of collector area in summer, a solar desiccant cooling system can be integrated in the solar thermal system. This paper study such combination, using computer simulations with the program TRNSYS, Klein(2000). (Author)

  18. State of the art of municipal solid wastes and hazard wastes disposal in Argentina; Diagnostico de la situacion del manejo de los residuos solidos municipales y peligrosos en Argentina

    Energy Technology Data Exchange (ETDEWEB)

    Savino, A.A.

    1997-12-31

    The author analyzes the up to date situation of Argentina related to Municipal solid Waste management after the political and economic challenges suffered by Argentina. The author concludes that this country needs more waste treatment plants and more investments for environmental management. (Author) 15 refs.

  19. Assessment of environmental impact models in natural occurring radionuclides solid wastes disposal from the mineral industry; Avaliacao de modelos de impacto ambiental para deposicao de residuos solidos com radionuclideos naturais em instalacoes minero-industriais

    Energy Technology Data Exchange (ETDEWEB)

    Pontedeiro, Elizabeth May Braga Dulley

    2006-07-15

    This work evaluates the behavior of wastes with naturally occurring radionuclides as generated by the mineral industry and their final disposal in landfills. An integrated methodology is used to predict the performance of an industrial landfill for disposal of wastes containing NORM/TENORM, and to define acceptable amounts that can be disposed at the landfill using long-term environmental assessment. The governing equations for radionuclide transport are solved analytically using the generalized integral transform technique. Results obtained for each compartment of the biogeosphere are validated with experimental results or compared to other classes of solutions. An impact analysis is performed in order to define the potential consequences of a landfill to the environment, considering not only the engineering characteristics of the waste deposit but also the exposure pathways and plausible scenarios in which the contaminants could migrate and reach the environment and the human population. The present work permits the development of a safety approach that can be used to derive quantitative waste acceptance criteria for the disposal of NORM/TENORM waste in landfills. (author)

  20. The former tests realized to a personal neutron dosemeter based on solid nuclear tracks detector; Primeras pruebas realizadas a un dosimetro personal de neutrones basado en detectores solidos de trazas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Camacho, M.E.; Tavera, L.; Balcazar, M. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    Due to the increase in the use of neutron radiation a personal neutron dosemeter based on solid nuclear tracks detector (DSTN) was designed and constructed. The personal dosemeter design consists of three arrangements. The first one consists of a plastic nuclear tracks detector (LR115 or CR39) in contact with a LiF pellet. The second one is the same that above but it placed among two cadmium pellets and, the third one is formed by the alone detector without converter neither neutron absorber. The three arrangements are placed inside a plastic porta detector hermetically closed to avoid the bottom produced by environmental radon whichever both detectors (LR115 and CR39) are sensitive. In this work the former tests realized to that dosemeter are presented. (Author)

  1. Theory of a new elastic-plastic-viscous model and its application to the nuclear fuel mechanical analysis; Teoria y aplicacion a los combustibles nucleares de un nuevo modelo de respuesta de un solido elasto-visco-plastico

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, A.

    1977-07-01

    In this work a new elastic-plastic-viscous model is described. The model is one of the multiple integral type, and has been included in a numerical code to predict the behaviour of a nuclear fuel of cylindrical form. Some features of this code are also described. (Author) 91 refs.

  2. Synthesis of Ca{sub 3}CO{sub 4}O{sub 9} via solid state reaction; Sintese de Ca{sub 3}CO{sub 4}O{sub 9} via reacao no estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Melo, K.P.; Dutra, R.P.S.; Marques, K.A.; Junior, S.M.S.; Brasileiro, C.T.; Coutinho, S.V.C.R.; Souza, T.; Chagas, T.F.; Silva, R.M.; Macedo, D.A., E-mail: kliviamelo@outlook.com [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

    2016-07-01

    Solid oxide fuel cells (SOFCs) stand out as the most promising today's energy conversion technologies. In the development of cathode materials for SOFC, calcium cobaltate (Ca3Co4O9, C349) appears as a potential alternative to traditional lanthanum manganites. In this work, C349 was prepared via solid state reaction of stoichiometric mixtures containing CaCO3 from mollusk shells, in natura (M1) and heat treated at 550 ° C (M2), and Co3O4 obtained by citrate method. The M1 and M2 mixtures were calcined at 800 (powder) and 900 ° C (tablets) for 12 h. The crystal structure and phase composition of the powder and the reaction products were studied by X-ray diffraction Rietveld refinement of the diffraction data. The results showed the formation of free C349 secondary stages, showing a good alternative to use waste from seafood shells as raw material for obtaining high-value ceramics.(author)

  3. Preparation of cathode materials for solid oxide solid fuel (SOFC) using gelatin; Preparacao de materiais catodicos para celulas a combustivel de oxido solido (SOFC) atraves do uso de gelatina

    Energy Technology Data Exchange (ETDEWEB)

    Silva, R.M.; Aquino, F. de M.; Macedo, D.A. de; Sa, A.M.; Galvao, G.O., E-mail: rinaldo_mendesa@hotmail.com [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

    2016-07-01

    Fuel cells are electrochemical devices that convert chemical energy into electrical energy. These devices are basically divided into interconnectors, electrolyte, anode, and cathode. Recently, studies of improvements in microstructural and morphological properties of calcium cobaltate (Ca{sub 3}Co{sub 4}O{sub 9}, C349) has been made regarding its potential use as SOFC cathode for intermediate temperature. Gelatin has proven to be effective as a polymerizing agent in the synthesis of nanocrystalline materials. This work reports the synthesis and characterization of the C349 cathode using commercial gelatin. The structural properties of the material were determined by X-ray diffraction (XRD). Morphological characterization was performed by scanning electron microscopy (SEM). The results showed the formation of the crystalline phase at 900 °C, indicating the effectiveness of the gelatin in the preparation of cathodes for SOFC. (author)

  4. Analysis of cathode materials of perovskite structure for solid oxide fuel cells, sofc s; Analisis de materiales catodicos de estructura perovskita para celdas de combustible de oxido solido, sofcs

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado F, J.; Espino V, J.; Avalos R, L. [Universidad Michoacana de San Nicolas de Hidalgo, Facultad de Ingenieria Quimica, Santiago Tapia 403, Morelia, Michoacan (Mexico)

    2015-07-01

    Fuel cells directly and efficiently convert the chemical energy of a fuel into electrical energy. Of the various types of fuel cells, the solid oxide (Sofc), combine the advantages in environmentally benign energy generation with fuel flexibility. However, the need for high operating temperatures (800 - 1000 grades C) has resulted in high costs and major challenges in relation to the compatibility the cathode materials. As a result, there have been significant efforts in the development of intermediate temperature Sofc (500 - 700 grades C). A key obstacle for operation in this temperature range is the limited activity of traditional cathode materials for electrochemical reduction oxygen. In this article, the progress of recent years is discussed in cathodes for Sofc perovskite structure (ABO{sub 3}), more efficient than the traditionally used La{sub 1-x}Sr{sub x}MnO{sub 3-δ} (LSM) or (La, Sr) CoO{sub 3}. Such is the case of mixed conductors (MIEC) double perovskite structure (A A B{sub 2}O{sub 5+δ}) using different doping elements as La, Sr, Fe, Ti, Cr, Sm, Co, Cu, Pr, Nd, Gd, dy, Mn, among others, which could improve the operational performance of existing cathode materials, promoting the development of optimized intermediate temperature Sofc designs. (Author)

  5. Production and characterization of a Fe-Ni alloy by aqueous coloidal processing and solid state reaction; Producao e caracterizacao de uma liga Fe-Ni obtida por processamento coloidal aquoso e reacao de estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Vieira Junior, Luiz Eloi; Rodrigues Neto, Joao Batista; Klein, AloIsio Nelmo; Hotza, Dachamir, E-mail: eloi_junior@hotmail.com, E-mail: jbrn.ufsc@gmail.com, E-mail: a.n.klein@ufsc.br, E-mail: d.hotza@ufsc.br [Universidade Federal de Santa Catarina (UFSC), Florianopolis, (Brazil); Moreno, Rodrigo, E-mail: rmoreno@icv.csic.es [Instituto de Ceramica y Vidrio (ICV/CSIC), Madri (Spain)

    2016-10-15

    Colloidal processing is a widely used technique to produce ceramic components. Several papers have been published in the last decade presenting the possibility to obtain aqueous concentrate stable suspension of metallic particles from their pH control and using dispersants. This paper aims to study the production of a steel with austenitic microstructure using elemental iron (Fe) and nickel (Ni) powders via colloidal route. For this, Zeta potential measurements were performed between pH 2 and 12 to Fe30Ni wt% composition. Aqueous suspensions reached solids concentrations of up to 45% v/v and processed by slip casting. The compacts were characterized by density (Archimedes), differential thermal analysis (DTA) and dilatometry. After sintering at 900°C to 1100°C/1h, the sintered bodies presented a microstructure with of annealing twins, porosity less than 10 %v/v approximate Vickers microhardness of 160 HV. (author)

  6. Optimization of the operation of separation of the solids in suspension of the purines (Part I); Optimizacion de la operacion de separacion de los solidos en suspension de los purines (Parte I)

    Energy Technology Data Exchange (ETDEWEB)

    Bosque Hernandez, J. L. del; Martin Sanchez, J. L.

    2004-07-01

    The swinish cattle raising you can calculate in our country m 18 million heads. Locating the Spanish cattle cabin in the second position of the European Union. This sector is of great importance in the economy, having big possibilities of growth, due to the great existent demand. However, the generated residuals, denominated purines, they suppose a great obstacle for the expansion of this sector. The purines mammoth production and other cattle residuals outline a serious problem of environmental contamination; for what is necessary to establish the approaches for an appropriate treatment of the same ones, with the purpose of achieving the elimination of the problems of environmental contamination that you/they generate and, in special way, those contamination of the waters. (Author) 5 refs.

  7. Conformation of LSM/YSZ and LSM ceramic films obtained by the citrate and solid mixture techniques; Conformacao de filmes ceramicos de LSM e LSM/YSZ obtidos pelas tecnicas citratos e mistura de solidos

    Energy Technology Data Exchange (ETDEWEB)

    Chiba, R.; Vargas, R.A.; Andreoli, M.; Seo, E.S.M., E-mail: rchiba@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (CCTM/IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencia e Tecnologia de Materiais. Lab. de SOFC - Insumos e Componentes

    2009-07-01

    In this work, the ceramic films of LSM/YSZ (strontium-doped lanthanum manganite/Yttria-stabilized zirconia) and LSM used as cathodes of the solid oxide fuel cells (SOFC) are conformed by the wet powder spraying technique. The composite LSM/YSZ was obtained by the solid mixture technique and LSM by the citrate technique. For the formation of the LSM/YSZ and LSM ceramic films was necessary the preparation of dispersed ceramic suspensions for the deposition in YSZ substrate, used as electrolyte of the CaCOS. These powders were conformed using an aerograph for the deposition of the LSM/YSZ and LSM thin films of approximately 40 microns. The half-cells had been characterized by X-ray diffractometry (XRD), identifying the phases hexagonal (LSM) and cubica (YSZ). And electronic scanning electron microscopy (SEM) was used to evaluate the adherence and porosity of the ceramic films according to the characteristics of the cathode. (author)

  8. Synthesis and characterization of Al{sub 2}O{sub 3} obtained from the polymeric precursor method using glycerin as a poly alcohol; Sintese e caracterizacao de Al{sub 2}O{sub 3} obtida por meio do metodo dos precursores polimericos utilizando glicerina como polialcool

    Energy Technology Data Exchange (ETDEWEB)

    Elicker, C.; Gaier, M.; Almeida, S.R.; Vieiraaa, B.M.; Ratmann, C.W.R.; Pereira, C.M.P. de; Cava, S.S. [Universidade Federal de Pelotas (UFPel), Pelotas, RS (Brazil); Egea, J.J. [Consejo Superior de Investigaciones Cientificas, Madrid (Spain)

    2014-07-01

    In this study, calcium aluminate was synthesized using glycerin to replace ethylene glycol in the polymeric precursor method. The resulting resin was pre-calcined in a muffle at 300 °C for 2 h and the resulting material was calcined at 900 °C for 2 h. The powders were analyzed by XRD, SEM and EDX, TEM, Micro-Raman and IR. The results demonstrated the possibility of using glycerin as an alternative to ethylene glycol in the polymeric precursor method. (author)

  9. Polymers pipeline study (PP and PEAD) for paraffin deposits inhibition: static (contact angle) and with flow (depolarization of the petroleum fluorescence); Estudo de dutos polimericos (PP e PEAD) para inibicao de depositos parafinicos: estatico (angulo de contato) e com fluxo (despolarizacao da fluorescencia do petroleo)

    Energy Technology Data Exchange (ETDEWEB)

    Quintella, Cristina M.; Castro, Martha T.P.O.; Musse, Ana Paula S. [Universidade Federal da Bahia, Salvador, BA (Brazil)

    2003-07-01

    This work evaluated the formation of paraffin deposits as a function of the chemical constitution of the pipeline walls. Two low cost polymers, available in the Brazilian market either as solids or as extruded films, were studied: polypropylene (PP) and high density polyethylene (PEAD). The static interfacial interactions were evaluated by contact angle and showed that the interaction between crude oil and PEAD was 16% stronger than with PP. For the dynamic studies a flow cell was developed in order to observe mainly the boundary layers. The paraffin deposits were identified through the decrease of the intermolecular alignment within the flowing oil. PEAD proved to be 43% more efficient that PP in interacting with the crude oil. Under flowing conditions, the chemical interfacial effects became more pronounced due to the molecular effects overcoming the hydrodynamic effects. Photos of the cell walls showed globular paraffin deposits on PEAD and their absence on PP. As both polymers are linear, the higher tendency of PEAD to yield paraffin deposits was attributed to the absence of lateral branches of methyl groups. There by PP was found to be better than PEAD to avoid paraffin deposition. (author)

  10. Study and selection of structured packing material: metallic, polymeric or ceramic to operate a column of absorption polluting gases coming from brick kilns efficiently; Estudio y seleccion de material empaque estructurado: metalico, polimerico o ceramico, para operar eficientemente una columna de absorcion de gases contaminantes provenientes de hornos tabiqueros

    Energy Technology Data Exchange (ETDEWEB)

    Salazar P, A.

    2012-07-01

    In this research three structured packing materials were characterized: a metallic, polymeric and ceramic. The study of the physical properties of structured packing materials, and their behavior within the absorption column allowed to suggest a gas-liquid contactor material with higher mechanical and chemical resistance, which is more efficient for the treatment of sour gases from brick kilns. To study the mechanical properties (hardness, tension and elastic modulus) were used procedures of the American Society for Testing Materials, as well as resistance to corrosion. The geometric characteristics, the density, the melting temperature and the weight were tested with procedures of the measuring equipment. The structure was evaluated by X-ray diffraction, morphology was observed by scanning electron microscopy coupled to a sound of dispersive energy of X-ray, to quantify elemental chemical composition. The interaction of gas-liquid contactors materials in presence of CO{sub 2}, was evaluated in three absorption columns built of Pyrex glass, with a diameter of 0.1016 m, of 1.5 m in height, 0.0081m{sup 2} cross-sectional area, packed with every kind of material: metallic, polymeric and ceramic, processing a gas flow of 20m{sup 3} / h at 9% CO{sub 2}, in air and a liquid flow to 30% of Mea 5 L/min. The results of the properties studied were by the metallic material: more density, higher roughness, the greater tensile strength, greater resistance to corrosion in the presence of an aqueous solution of monoethanolamine (Mea) to 30% by weight, improvement more efficient absorption of CO{sub 2}, and higher modulus of elasticity. The polymeric material was characterized to have lower hardness, lower roughness, lower density, lower melting temperature, greater resistance to corrosion in the presence of 1 N H{sub 2}SO{sub 4} aqueous solution, and allowed an absorption efficiency of CO{sub 2}, 2% lower than that presented by the material metallic. The ceramic material found to be the hardest of the three materials studied, the higher density, lower modulus of elasticity, the lower corrosion resistance in the presence of 1 N H{sub 2}SO{sub 4} aqueous solution. The study of material properties, revealed that the metallic material is more resistant to abrasive wear, the more tenacious, more chemically resistant in the presence of Mea aqueous solution of 30% by weight, as well as the most efficient, improvement an absorption of 95% CO{sub 2}, followed by the polymeric material, which is the most ductile, the more elastic, and its low hardness is susceptible to scratching and abrasion, its hydrophobicity, it takes longer to form the liquid film in the absorption process, improved a 93% absorption, was the most chemically resistant in the presence of 1 N H{sub 2}SO{sub 4} aqueous solution. The ceramic allowed 84% absorption, was the most rigid fragile, susceptible to wear and its porosity reduce the contact area between the liquid and gas, resulting be the contactor that improves minus efficiency in the absorption process. (Author)

  11. Chemoselective biohydrogenation of chalcone (2{Epsilon})-3-(1,3-benzodioxole-5-yl)-1-phenyl-2-propen-1-one mediated by baker yeasts immobilized in polymeric supports; Bioidrogenacao quimioseletiva da chalcona (2{Epsilon})-3-(1,3-benzodioxol-5-il)-1-fenil-2-propen-1-ona mediada por fermentos de pao imobilizado em suportes polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Mundstock, Flavia L.S.; Silva, Vanessa D.; Nascimento, Maria da G., E-mail: mundstock@qmc.ufsc.b [Universidade Federal de Santa Catarina (DQ/UFSC), Florianopolis, SC (Brazil). Dept. de Quimica

    2009-07-01

    In this study, the yeast Saccharomyces cerevisiae, baker's yeast (BY) was immobilized in poly(ethylene oxide) (PEO), poly(vinyl alcohol) (PVA), sodium caseinate (SC), gelatin (G) films and in agar (A) and gelatin (G) gels, and used as a biocatalyst in the biohydrogenation reaction of (2{Epsilon})-3-(1,3-benzodioxyl-5-yl)-1-phenyl-2-propen-1-one (1). The transformation of (1) into the corresponding dehydro chalcone (2) through biohydrogenation reactions was carried out in n-hexane at 25 or 35 deg C, for 4-48 h reaction. The product conversion, under different experimental conditions, was evaluated by hydrogen nuclear magnetic resonance, {sup 1}H NMR.The highest conversion degrees were achieved using BY immobilized in agar gel, (29-47%), depending also on the temperature. Using BY immobilized in PEO, PVA, SC and G films, the conversion into (2) was lower (0-21%). The results show the feasibility of the use of BY immobilized in polymeric materials to reduce a,b-unsaturated carbonyl compounds. (author)

  12. Synthesis of aluminum oxide by the polymer precursor method (Pechini) in 4: 1 ratio of citric acid: metal cation: calcination temperature effect; Sintese do oxido de aluminio pelo metodo dos precursores polimericos (Pechini) na relacao 4:1 de acido citrico: cation metalico: efeito da temperatura de calcinacao

    Energy Technology Data Exchange (ETDEWEB)

    Silva, M.C.; Lira, H.L.; Ribeiro, P.C.; Freitas, N.L., E-mail: mirelecsilva@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais

    2014-07-01

    The technology field is nanopowders prominent in science since these materials fall in various sectors regarding their applications. This work aims at the synthesis of aluminum oxide by polymeric precursors in 4:1 ratio of citric acid:metal cation and evaluate the influence of calcination temperature on their structural and morphological characteristics. The samples after reaction were characterized by XRD and thermal analysis. After calcination 500-1200°C the samples were characterized by XRD, SEM and particle size distribution. The results showed that the variation of the calcination temperature is sufficient to achieve a same material with different structural and morphological characteristics. The most stable phase aluminum oxide arose only after calcination at 1100°C, below 900°C, the amorphous material appeared. As regards the morphology, the change was not as significant as compared to the structure. (author)

  13. Evaluation of the response of modified MAGIC-f polymeric gel using a clinical brachytherapy source and Monte Carlo simulation with package PENELOPE; Avaliacao da resposta do gel polimerico MAGIC-f modificado utilizando uma fonte clinica de braquiterapia e simulacao Monte Carlo com o pacote PENELOPE

    Energy Technology Data Exchange (ETDEWEB)

    Quevedo, Ana Luiza; Nicolucci, Patricia, E-mail: anaquevedo@usp.br [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Dept. de Fisica; Borges, Leandro F. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Setor de Radioterapia

    2016-07-01

    A comparison of experimental and simulated relative doses of a clinical brachytherapy source was performed. A 5 x 5 x 7 cm{sup 3} phantom with a modified MAGIC-f gel was irradiated using a clinical {sup 192}Ir source, Varian, model GammaMed Plus. The phantom was irradiated with 7,5 Gy, commonly used in gynecological treatments. The dose distributions readings were performed 24h after irradiation using Magnetic Resonance Imaging, weighted in T2, with repetition time of 6000 ms, echo-time of 15 ms, 16 echos and 0.40 mm pixel size. The same brachytherapy source was modeled in the Monte Carlo package PENELOPE to obtain dose distributions. The energy cutoff for electrons, photons and positrons was 100 keV, the primary particles condensation parameters remained the same at 0.3. The dose distributions were obtained in two planes perpendicular to the source: one passing through the source’s center and the other at 0.5 cm away from the source’s center in direction of the top of encapsulation. A comparison of the experimental results using the polymeric gel to the computational results showed maximum differences of 12.5%, at 0.62 cm from the source for the central plane, and 6.4% at 0.5 cm from the source for the superior plane. Considering the high dose gradient of these clinical brachytherapy sources, the results obtained in these work show that MAGIC-f gel with modified formulation, is promising for dosimetry in brachytherapy. (author)

  14. Containment system and thermal conduction in lithium electric batteries energy modules 2 kWh with polymeric electrolytes; Sviluppo del sistema di contenimento e del condizionamento termico di moduli da 2 kWh di batterie al litio ad elettrolita polimerico

    Energy Technology Data Exchange (ETDEWEB)

    Ciancia, A.; Alessandrini, F. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Energia Divisione Tecnologie Energetiche Avanzate

    1997-06-01

    In this work are presented some technical specifications regarding lithium electric batteries with polymeric electrolytes, in particular the design of electrodes container efficient and reliable and thermal management system oriented to safety, performances and battery life.

  15. Evaluate the action of polymeric additives in protect and recover water and bentonite clay based drilling fluids contaminated by degradation agents; Analise da acao de aditivos polimericos na protecao e recuperacao de fluidos de perfuracao base agua e bentonita contaminados por sais

    Energy Technology Data Exchange (ETDEWEB)

    Campos, L.F.A.; Ferreira, H.S.; Amorim, L.V.; Franca, K.B.; Ferreira, H.C. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2008-07-01

    The aim of this paper is study influences of electrolytes and cellulose polymers on rheological and water loss properties of dispersions of bentonite compositions. Evaluate the action of degradation additives CaSO{sub 4}, MgCl{sub 2} and CaCl{sub 2} and polymeric additives to protect and recover water and clay based. The results show a negative effect of degradation additives the rheological and water loss properties of drilling fluids. The cellulose polymers can be successfully applied to protect and recover of the rheological properties and water loss of the dispersions contaminated. (author)

  16. Structural and morphological characterization of TiO{sub 2}-ZrO{sub 2} powders obtained by the polymeric precursors method; Caracterizacao estrutural e morfologica de pos de TiO{sub 2}-ZrO{sub 2} obtidos pelo metodo dos precursores polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, M.A.; Gama, L.; Bispo, A.; Neiva, L.S., E-mail: m_aparecidaribeiro@yahoo.com.b [Universidade Federal de Campina Grande (DEMa/UFCG), PB (Brazil). Dept. de Engenharia de Materiais; Bernardi, M.I.B. [Universidade de Sao Paulo (IFSC/USP), Sao Carlos, SP (Brazil). Inst. de Fisica; Kiminami, R.H.G.A. [Universidade Federal de Sao Carlos (DEMa/UFSCar), SP (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    This work aims to characterize the structure and morphology of TiO{sub 2}-ZrO{sub 2} powders obtained by polymeric precursor method. For this we studied the following compositions: 0.25, 0.5 and 0.75 moles of Zr and calcined at 800 deg C for one hour. The powders obtained were characterized by XRD, SEM and nitrogen adsorption (BET). The analysis of X-ray diffraction showed that the powders had a phase of TiO{sub 2} in the anatase form and a tetragonal phase of ZrO{sub 2}. The crystallite size was between 8, 13 and 11 nm respectively. The analysis of scanning electron microscopy showed the growth of ZrO{sub 2} nanoparticles and that these comprise spherical agglomerates of less than 100 nm. Particle size determined by the BET ranging 28.1-29.5 nm, showing thereby the character of nanosized powders. (author)

  17. New multifunctional polymeric additives for water based fluids to be used in drilling of wells with extensive horizontal displacement in ultra deep water; Novos aditivos polimericos multifuncionais para fluidos de base aquosa a serem utilizados na perfuracao de pocos de grande afastamento horizontal em aguas ultraprofundas

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues Junior, Jorge de Almeida; Lachter, Elizabeth Roditi; Nascimento, Regina Sandra Veiga [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Quimica. Dept. de Quimica Organica], e-mail: rodriguesiq@gmail.com, e-mail: lachter@iq.ufrj.br, e-mail: rsandra@iq.ufrj.br

    2007-06-15

    This work presents the development of a new class of polymeric additives for water based muds (WBM), that show simultaneously several properties for good performance, being ecologically correct and of low cost. The additives were obtained through the chemical modification of hydrophilic polymers by coupling different hydrophobic segments to the polymeric chains. The rheological analysis of aqueous systems of the products showed a pseudoplastic behavior, and it is suggested a model to explain the obtained results. A series of drilling fluids was formulated with the best systems. The developed additives successfully played the functions of rheology modifiers, shale inhibitors, filtrate reducers and lubricants, leading to excellent results at low pressure and low temperature (LPLT) conditions. (author)

  18. Evaluation of the response of polymeric gel modified MAGIC-f using a clinical brachytherapy source and Monte Carlo simulation with package PENELOPE; Avaliacao da resposta do gel polimerico MAGIC-f modificado utilizando uma fonte clinica de braquiterapia e simulacao Monte Carlo com o pacote PENELOPE

    Energy Technology Data Exchange (ETDEWEB)

    Quevedo, Ana Luiza; Nicolucci, Patricia [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia Ciencias e Letras. Dept. de Fisica; Borges, Leandro F. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Hospital das Clinicas. Setor de Radioterapia

    2016-07-01

    In this work a comparison of experimental and simulated relative doses of a clinical brachytherapy source was performed. A 5 x 5 x 7 cm{sup 3} phantom with a modified MAGIC-f gel was irradiated using a clinical {sup 192}Ir source and read using Magnetic Resonance Imaging. The Monte Carlo simulation package PENELOPE was used to simulate the dose distributions of the same radiation source. The dose distributions were obtained in two planes perpendicular to the source: one passing through the source's center and the other at 0.5 cm away from the source's center. The higher differences found between experimental and computational distributions were 12.5% at a point 0.62 cm from the source for the central plane and 8.6% at 1.3 cm from the source to the plane 0.5 cm away from the source's center. Considering the high dose gradient of these dose distributions, the results obtained show that the modified MAGIC-f gel is promising for brachytherapy dosimetry. (author)

  19. Preparation and electrical characterization of electrolytes obtained from solid solution (Zr{sub 0.84}Y{sub 0.16O1.90}) x (Ce{sub 0.80}Gd{sub 0.20}O{sub 1.90}){sub 1-x} for fuel cells application; Preparacao e caracterizacao eletrica de eletrolitos obtidos a partir da solucao solida (Zr{sub 0.84}Y{sub 0.16O1.90}) x (Ce{sub 0.80}Gd{sub 0.20}O{sub 1.90}){sub 1-x} para aplicacao em pilhas de combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Tonelli, Bruno C.; Antunes, Fabio C.; Souza, Dulcina P.F. de, E-mail: fcaufscar@yahoo.com.b [Universidade Federal de Sao Carlos (LAPCEC/UFSCar), SP (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais. Lab. de Preparacao e Caracterizacao Eletrica em Ceramicas

    2010-07-01

    Oxide fuel cells based on yttria stabilized zirconia (YSZ) operates near 1000 deg C. This high temperature results in physical and chemical degradation of the device. Rare earths doped ceria (REC) based systems can operate at low temperatures due to higher ionic conductivity. However, at low oxygen partial pressure, doped ceria shows n-type electronic conductivity due to reduction of Ce{sup +4} to Ce{sup +3}. Trying to put together the zirconia and ceria advantage, YSZ-REC composites have been investigated. In this work, YSZ-GdDC powders mixtures were prepared and pellets were isostatically pressed. Pellets were sintered 1100-1500 deg C temperature range. Sintered pellets were characterized by density measurements, X-ray diffraction, impedance spectroscopy and scanning electron microscopy. The experimental procedure adopted in this work generated solid solutions instead of composite samples. Nevertheless, the composition containing {approx}76 vol.% of YSZ, in spite of the high porosity, showed electrical conductivity similar to pure YSZ. (author)

  20. Fisica degli atomi e dei nuclei

    CERN Document Server

    Bernardini, Carlo

    1965-01-01

    Evidenza della struttura atomica della materia ; le proprietà degli atomi e la meccanica atomica ; gli atomi e le radiazioni elettromagnetiche ; struttura microscopica dello stato gassoso ; struttura microscopica dello stato liquido ; struttura microscopica della stato solido ; proprietà elettriche e magnetiche delle sostanze ; proprietà dei nuclei degli atomi ; le particelle elementari.

  1. Symmetry in Electromagnetic Scattering from a Cluster of Spheres.

    Science.gov (United States)

    1980-08-01

    Trans. London A 255, 199 (1963). 10. Gyorffy, B. L. In Fondamenti di Fisica dello Stato Solido, ed. F. Fumi (Rome: GNSM) p. 227. 1971. 11. Wu, T. Y...Douas I Caen, IN 47522 US MARINE CORPS Director, Development Coutr MumI Corp Developmnt & Education Command ATTN: Flre Power Diviio. I Quantlco, VA 22134 19

  2. Fuel cell: new electrocatalysts for SOFC (Solid Oxide Fuel Cells) anodes and regulation between cell performance and catalytic activity; Celula a combustivel: novos eletrocatalisadores para anodos de SOFC (Celulas a Combustivel de Oxido Solido) e correlacao entre desempenho da celula e atividade catalitica

    Energy Technology Data Exchange (ETDEWEB)

    Boaventura, Jaime S.; Aguiar, Aurinete B.; Brandao, Soraia T. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil); Frank, Maria Helena Troise; Campos, Michel F. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    Electro-catalysts were prepared using new routes. Chemical Ultrasound Deposition (CUD) method: aqueous solution of nickel nitrate and citric acid was ultrasound vaporized and deposited on heated Ytria-stabilized Zirconia (YSZ). Resin impregnation (IPR) method: nickel oxide and YSZ were mixed, added to phenolic resins, precipitated in acidic water and milled. Wet impregnation method (IMP) was used for comparison: YSZ and an aqueous solution of nickel nitrate and citric acid were mixed, followed by evaporation, drying and calcination. The catalysts were evaluated for methane steam reforming in a quartz reactor. The reactions were conducted for one hour with no significant catalytic activity loss. In reactions with 100 mg of catalyst and a mixture consisting of methane and steam (3:1), IPR catalyst showed activity higher and better stability than those by IMP. On other tests, the reform was conducted with 100 mg of catalyst and methane to steam of 10. The IPR catalyst activity was so high that the reaction approached equilibrium conditions. Anode/electrolyte/cathode units (A/E/C) were prepared with the above catalysts as follows: the anode was a catalyst porous layer; the electrolyte an YSZ dense layer; and the cathode an LSM porous layer; graphite powder formed the material porosity. The two first layers, in powder form, were put in a stainless steel cast, pressed to 4000 bars and sinterized. The cathode layer was subsequently added using tape-casting techniques followed by sintering. A/E/C units showed 40% linear contraction and porosity higher than 20%. For fuel cell tests, A/E/C was mounted in alumina plates with platinum current collectors. Unitary SOF cells were loaded with hydrogen diluted in nitrogen showing opened circuit voltage from circa 700 mV, for the CUD anode, to 350 mV, for the IPR anode. The unitary SOFC was loaded with methane for 15 minutes or longer, with no noticeable voltage loss. At 1300 K the SOFC made with IPR or IMP catalysts showed opened current voltages close to 500 mV, while CUD SOFC measured less approximately 300 mV. In conclusion, the SOFC opened current voltage might be related to the reforming activity of the electro-catalyst used as the anode. (author)

  3. Development a solid state sensor based on SnO{sub 2} nanoparticles for underground coal mine methane detection using zeolites as filter; Desenvolvimento de sensor de estado solido com nanoparticulas de SnO{sub 2} para metano de mina de carvao subterranea utilizando zeolitas como filtro

    Energy Technology Data Exchange (ETDEWEB)

    Abruzzi, R.C.; Dedavid, B.A.; Pires, M.J.R.; Luvizon, N.S., E-mail: rafael.abruzzi@acad.pucrs.br [Pontificia Universidade Catolica do Rio Grande do Sul (PUCRS), Porto Alegre, RS (Brazil)

    2016-07-01

    Aiming the monitoring of methane (CH{sub 4}) in underground coal mines, the tin oxide (SnO{sub 2}) was synthesis and applied to the development of a MOS sensor (metal oxide semiconductor). Zeolite have been tested as a filter of carbon dioxide (CO{sub 2}) to ensure the selectivity in the detection of CH{sub 4}. Analysis of Transmission Electron Microscopy (TEM) and X-Ray Diffraction (XRD) indicated a synthesis of nanoscaled structures. The energy band gap showed characteristic values for a potential application of SnO{sub 2} in CH{sub 4} sensors. Analysis of surface area by BET isotherms showed high values for the zeolite 13X and Y, while adsorption tests indicated that the zeolite 13X presents greater adsorption efficiency of CO{sub 2}. The sputtering technique for deposition of the electrodes, as well as the method of drop coating for deposition of SnO{sub 2}, proved effective in developing the sensor. (author)

  4. Synthesis and characterization of lanthanum manganite films for using in solid oxide fuel cells for operation at intermediate temperatures; Sintese e caracterizacao de filmes de manganita de lantanio para utilizacao em pilhas a combustivel de oxido solido para operacao em temperaturas intermediarias

    Energy Technology Data Exchange (ETDEWEB)

    Gama, L.M.; Paes Junior, H.R. [Laboratorio de Materiais Avancados - LAMAV - Universidade Estadual do Norte Fluminense - UENF, Campos dos Goytacazes, RJ (Brazil)

    2010-07-01

    This work aims to investigate the effects of doping and thermal processing of LaMnO{sub 3}, La{sub 0},{sub 8}Sr{sub 0},{sub 2}MnO{sub 3} e La{sub 0},{sub 8}Ca{sub 0},{sub 2}MnO{sub 3} films deposited by spray-pyrolysis technique on their structural, morphological and electrical properties, seeking its application as cathode in solid oxide fuel cells for operation in intermediate temperatures (IT-SOFC). These films were deposited on ferritic stainless steel type AISI 444. The thermal processing of the films was accomplished in air with treatment temperature of 900 degree or 1000 degree during 2 hours. The characterization by Xray diffraction revealed that the thermal processing propitiated the formation of the expected phases with the structure of perovskite. The analysis of surface morphology showed that doping provides an increase in porosity. Electrical characterization showed that Sr-doped films showed higher conductivity values and an activation energy of the conduction process of 0,41 eV. (author)

  5. Dosimetric characterization of a 2-D array of 223 solid state detectors for daily morning checks in Tomo Therapy equipment; Caracterizacion dosimetrica de un arreglo 2D de 223 detectores de estado solido para verificaciones matutinas diarias en un equipo de Tomo Terapia

    Energy Technology Data Exchange (ETDEWEB)

    Reyes S, U.; Sosa A, M. [Universidad de Guanajuato, Division de Ciencias e Ingenieria, Lomas del Bosque No. 103, Col. Lomas del Campestre, 37150 Leon, Guanajuato (Mexico); Vega C, H. R., E-mail: uvaldoreyes@hotmail.com [Universidad Autonoma de Zacatecas, Unidad Academica de Estudios Nucleares, Cipres No. 10, Fracc. La Penuela, 98068 Zacatecas, Zac. (Mexico)

    2015-10-15

    Tomo Therapy is a new technique for the cancer treatment; however, the equipment must meet nearly all mechanical and dosimetric characteristics of a conventional linear accelerator for medical use. Daily quality controls are vital to the good operation of the equipment and thus guarantee excellent quality in the daily delivery of treatments. This paper presents the procedure of the dosimetric characterization of a two-dimensional array of 223 solid state detectors, called TomoDose of the Sun Nuclear Company. Dosimetric important criteria are established to perform these checks quickly and accurately. Dosimetric tests proposed are: repeatability, linearity, dependence of Sad and SSD. Some results are compared with readings of the ionization chamber Exradim A1SL. Finally the results of 30 consecutive days are presented to establish criteria for evidence of dose, field size, symmetry and flattening of the radiation beam on Tomo Therapy equipment. Expected values for daily verification are: Dose constancy of 194.89 c Gy, σ= 1.31 c Gy, symmetry in the X axis of -0.19 %, σ=0.08 %, symmetry in the Y axis of 1.66 %, σ= 0.05 %, flattened in the X axis of 25.71 %, σ= 0.05 % and flattened in the Y axis of 6.41 %, σ= 10.23 %. Field sizes obtained were 40.45 cm in the X axis and 5.10 on the Y axis, with standard deviations of 0.02 cm and 0.01 cm, respectively. TomoDose dosimetric values, compared to the values obtained with ionization chamber, presented differences smaller than 2%. (Author)

  6. Use of solid waste from sand beneficiation process in the ceramic tile industry and its influence on the physical properties of the ceramic products; Uso do residuo solido proveniente do processo de beneficiamento de areia na industria de revestimentos ceramicos e sua influencia nas propriedades fisicas dos produtos ceramicos

    Energy Technology Data Exchange (ETDEWEB)

    Biff, Sergio, E-mail: sergio.biff@sc.senai.br [Servico Nacional de Aprendizagem Industrial (SENAI), Criciuma, SC (Brazil); Silva, Manoel Ribeiro da, E-mail: mrsilva@unifei.edu.br [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2016-10-15

    The current paper had as main aim characterize and assess the use viability of a solid waste from sand beneficiation process in the production of ceramic tiles. To determine the main components the solid waste was characterized by X-ray fluorescence and the main crystalline phases were determined by X-ray diffraction. To evaluate the addition effects of the solid waste over the solid waste was introduced into a ceramic composition in proportions of 5% and 10%. The ceramics materials obtained were subjected to the linear retraction, water absorption and flexural strength analysis according to the Brazilian standard NBR 13818 (1997). Additionally, the solid waste and the ceramic materials obtained in this study were classified according to the Brazilian standard NBR 10004 (2004) to assess the potential environmental impact. The main solid waste constituents identified were silicon dioxide and aluminum oxide, respectively 50.2% e 19.2%, distributed in the crystal forms of quartz and kaolinite. The ceramic materials obtained after firing at 1100 deg C, without and with 10% of solid waste presented respectively flexural strength of 13.86 MPa and 14,52Mpa. The results of water absorption without and with addition of 10% of solid waste were respectively 16.96% and 16.63%, both appropriate performances for use in ceramic tiles according to the Brazilian standard NBR 13818 (1997). On the other hand, the ceramic materials obtained with the addition of 10% of solid waste were classified as inert materials according to Brazilian standard NBR 10004 (2004), showing the capability of incorporating solid waste in ceramic materials. (author)

  7. Potential of the generation and the emissions avoided of greenhouse gases from urban solid residues from the Rio de Janeiro, Brazil, city; Potencial de geracao e de emissoes evitadas de gases de efeito estufa de residuos solidos urbanos na cidade do Rio de Janeiro

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, Saulo Machado [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Programa de Planejamento Energetico], e-mail: saulo@lima.coppe.ufrj.br; Rovere, Emilio Lebre La [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Lab. de Interdisciplinar de Meio Ambiente], e-mail: emilio@ppe.ufrj.br; Mahler, Claudio Fernando [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Grupo de Estudo em Tratamento de Residuos Solidos], e-mail: mahler0503@yahoo.com

    2008-07-01

    This work calculates the emissions of greenhouse, specifically the methane, coming from the biogas generated in anaerobic decomposition of the organic matter existing on the urban solid earth embankments, particularly the waste produced in the Rio de Janeiro city during the year 2007, besides three possible future mitigation scenarios of those emissions up to the year 2020, considering the present public politics adopted and the projections of population increasing and the per capita of the city (IPEA, 2007), The objective and justification consist of the data actualization for the next emission inventory of greenhouses at the Rio de Janeiro. It will be applied the IPCC (2006) methodology, and the application of alternative technologies in projects of avoided emissions of CH{sub 4}.

  8. Rationalization of the electric power consumption by recycling of residential solid wastes from the formal and informal collection at the Campinas city, Sao Paulo, Brazil; Racionalizacao do consumo de energia eletrica com a reciclagem dos residuos solidos domiciliares provenientes da coleta formal e informal no municipio de Campinas - SP

    Energy Technology Data Exchange (ETDEWEB)

    Streb, Cleci Schalemberger; Piunti, Regina Celia; Silva, Ennio Peres da; Barbosa, Sonia [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Programa de Planejamento de Sistemas Energeticos]. E-mail: streb@fem.unicamp.br

    2002-07-01

    This paper evaluates the potential of residues collection in Campinas, SP, Brazil, taking into account the data of informal collection. The paper also estimates the role played by paper, glass, plastic and aluminium recycling, in terms of electric power use avoiding or saving.

  9. Evaluation of using urban solid residues as renewable energy source: a reflexions on the way of production oriented to the wasteful consumption; Avaliacao do uso dos residuos solidos urbanos como fonte de energia renovavel: uma reflexao sobre o modo de producao voltado ao consumo perdulario

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Angela Oliveira da; Rosa, Luiz Pinguelli; Henriques, Rachel Martins [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Planejamento Energetico]|[Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Instituto Virtual Internacional de Mudancas Globais (IVIG)]. E-mails: gel@ivig.coppe.ufrj.br; rachel@ivig.coppe.ufrj.br; neilton@ivig.coppe.ufrj.br; Silva, Neilton Fidelis da [Centro de Educacao Tecnologica do Rio Grande do Norte (CEFET/RN), Natal, RN (Brazil)

    2004-07-01

    This article discusses the waste concept, the historical origin and formation, considering the social, economical and cultural characters. The document evaluates the rule of solid urban residue (SUR) as energy source, introducing the discussion that SUR carries a load of energy superior to the energy that can be obtained from his use as primary source.

  10. Biogas from landfills embankments: the Brazilian contribution for the management of urban solid residues and the greenhouse effect mitigation through the mechanisms for clean development; Biogas de aterros: a contribuicao do Brasil na gestao de residuos solidos urbanos e na mitigacao do efeito estufa atraves dos mecanismos de desenvolvimento limpo

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Gleide B.M.; Guimaraes, Hoji Y' a Henda da R.; Andrade, Euridice S. Mamede de; Teixeira, Gisele Pereira; Freitas, Marcos A.V. [Universidade Federal do Rio de Janeiro (COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico

    2008-07-01

    This paper studies the clean development mechanism (CDM) for sanitary sewage in Brazil, as instruments for flexibilization and mitigation of the effects of climate changes coming from the global heating. This research presents the assessments of the CDM projects for sanitary sewage in Brazil, considering the Project Conception Documents (PCD) approved until November 2007. The paper presents some methodologies for studying of energy generation potential from the biogas originated in sanitary sewage. The paper also contributes to projects of carbon credit commercialization, and relevance of the CDM instrument for the adequate management expansion of the residence solid residues as well, and advances in the implantation of sanitary embankments in Brazil.

  11. Risk evaluation on internal corrosion of a gas pipeline cut section based on metal mechanic tests and physiochemical analysis of the solids deposited in the pipes; Determinacion del riesgo por corrosion interna de un tramo cortado de una linea de transporte de gas natural a partir de ensayos metalmecanicos y del analisis fisicoquimico de los solidos depositados en la tuberia

    Energy Technology Data Exchange (ETDEWEB)

    Ditta Sarmiento, Johanna Milena [PETROBRAS International (BRASPETRO) (Colombia). Ingenieria de Corrosion DPSU

    2003-07-01

    After inspecting a one of the most important pipelines in Colombia, using intelligent tool, the pipe sections were selected that presented losses of thickness which probably they would be risking integrity of the same one and after, these sections were cut and replaced. To one of the cut sections a study with the objective was made him establish the present forms of corrosion and to determine the phenomena that influenced the presence of the damages. For this study were moderate thicknesses of the wall of the tube and was determined the criticality comparing it with its nominal thickness, according to Standard ASME B - 31G. Taking advantage of the presence solids in the surface, one became both, physical and chemical analysis, DRX and elementary analysis, with the objective to determine its origin and to correlate it with the types of corrosion that were in the line. The morphology that determined were Microbiological Influenced Corrosion, Erosion - Corrosion, Pitting and CO2 corrosion. Then, from all this information the analysis becomes of risks by internal corrosion in pipeline, the plan of mitigation and the plans of monitoring and inspection of the line to avoid the presence of anyone of these forms of corrosion in the future immediate. (author)

  12. Development of a solid phantom prototype of Mo-99, Tc-99, and Co-57 in epoxy resins for evaluating of the uniformity in SPECT systems images; Desarrollo de un prototipo de fantoma solido de Mo-99, Tc-99, y Co-57 en resinas epoxicas para evaluacion de la uniformidad en imagenes de sistemas SPECT

    Energy Technology Data Exchange (ETDEWEB)

    Garcia D, O.C. [Facultad de Medicina, UAEM, Toluca, Mexico (Mexico); Cortes P, A.; Becerril V, A. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico); Garcia R, J.C. [Instituto de Psiquiatria Ramon de la Fuente, Mexico D.F. (Mexico)

    2002-07-01

    A manufacture method of solid phantoms prototype of resin with different radioisotopes is described. The phantom manufactured of molybdenum 99 has an uniformity of 96% determined with a Na(Tl) detector mono channel analyzer with a lead collimator of 1 cm diameter. (Author)

  13. Comparative analysis of high pressure sodium vapor lamps and mercury vapor lamp with the solid state (LED) in the public lighting systems; Analise comparativa das lampadas de vapor de sodio a alta pressao e de vapor de mercurio com a lampada a estado solido (LED) em sistemas de iluminacao publica

    Energy Technology Data Exchange (ETDEWEB)

    Damato, J.C.; Bueno, J.E.; Astorga, O.A.M. [Universidade Estadual Paulista (LESIP/UNESP), Guaratingueta, SP (Brazil). Lab. de Eficiencia Energetica em Sistemas de Iluminacao Publica; Ricciulli, D.L.S. [Universidade Estadual Paulista (DEE/UNESP), Guaratingueta, SP (Brazil). Dept. de Engenharia Eletrica

    2009-07-01

    The necessity of energy conservation in Brazilian electric sector, with the intention to diminish the resources of generation investments, has going to use of electric energy conservation programs, being most important PROCEL - a national program of electric conservation energy by ELETROBRAS, and inside this, a national program for public illumination and efficient traffic signaling - named 'Reluz'. This program looks for a more efficient implantation of public lighting systems, that requires the use of lamp technologies that present a greater value in a relation between lumen/watt relation and then beyond providing economy, due to low consumption of electric energy. Besides technologies that are appearing, the inclusion of LED lamps, which offers a great application potential, comes blunting as improvement alternative, being that the next public illumination parks will be able count on these lamps associates to the high-pressure sodium lamps and other types currently used. (author)

  14. Method development for determination of herbicides and insecticides in surface waters using solid-phase extraction and high performance liquid chromatography; Desenvolvimento de metodologia para a determinacao de herbicidas e inseticidas em aguas superficiais utilizando extracao liquido-solido e cromatografia liquida de alta eficiencia

    Energy Technology Data Exchange (ETDEWEB)

    Lebre, Daniel Temponi

    2000-07-01

    Determination of low concentrations of pesticides in surface and ground waters requires high sensitivity analytical techniques. Solid-Phase Extraction (SPE) has been successfully employed to pre concentrate and extract pesticides compounds from water samples. High Performance Liquid Chromatography (HPLC) coupled with UV/Vis detector was used to separate and quantify the extracted compounds. In this work, samples of surface waters with known concentrations of herbicides (atrazine, simazine and trifluralin) and insecticides (aldicarb, carbofuran and carbaryl) were extracted by using SPE off-line technique. The compounds were separated and quantified by reverse phase HPLC with UV detection at 220 {eta}m. The extraction efficiency was compared between two columns filled with different materials: C{sub 18}-bonded silica phase (500 mg) and copolymer styrenedivynilbenzene resin (250 mg). The results were evaluated as the percent recovery of compounds obtained using different solvents at different concentrations. The results showed that recovery of the analytes greater than 80 % were obtained in SPE columns filled with C{sub 18} bonded silica phase with 6 mL of acetonitrile. Once the optimum conditions were chosen for simulate water samples, the method was validated through analytical and statistical procedures and applied for surface waters. The suitability of the method was verified for the studied compounds showing good sensitivity, i. e., concentrations within the range of 0.4 to 4.0 {mu}gL{sup -1} of pesticides could be quantified attending the limits proposed by official regulations. (author)

  15. Study of the obtainment of Mo{sub 2}C by gas-solid reaction in a fixed and rotary bed reactor; Estudo da obtencao de Mo{sub 2}C por reacao gas-solido em reator de leito fixo e rotativo

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, C.P.B. de; Souza, C.P. de; Souto, M.V.M.; Barbosa, C.M.; Frota, A.V.V.M., E-mail: cpbaraujo@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2016-07-01

    Carbides' synthesis via gas-solid reaction overcomes many of the difficulties found in other processes, requiring lower temperatures and reaction times than traditional metallurgic routes, for example. In carbides' synthesis in fixed bed reactors (FB) the solid precursor is permeated by the reducing/carburizing gas stream forming a packed bed without mobility. The use of a rotary kiln reactor (RK) adds a mixing character to this process, changing its fluid-particle dynamics. In this work ammonium molybdate was subjected to carbo-reduction reaction (CH4 / H2) in both reactors under the same gas flow (15L / h) and temperature (660 ° C) for 180 minutes. Complete conversion was observed Mo2C (dp = 18.9nm modal particles sizes' distribution) in the fixed bed reactor. In the RK reactor this conversion was only partial (∼ 40%) and Mo2C and MoO3 (34nm dp = bimodal) could be observed on the produced XRD pattern. Partial conversion was attributed to the need to use higher solids loading in the reactor CR (50% higher) to avoid solids to centrifuge. (author)

  16. Characterization of commercial poly(butadiene) Coperflex BR-45 vulcanized with sulfur and n-cyclohexyl-2-benzothiazole-sulfonamide by solid state NMR; Caracterizacao do polibutadieno comercial Coperflex BR-45 vulcanizado com enxofre e n-cicloexil-2-benzotiazola-sulfenamida por RMN no estado solido

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, M.R.G.; Tavares, M.I.B. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas; Menezes, S.M.C. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas; San Gil, R.A.S. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Quimica

    1997-12-31

    Vulcanization is a chemical process which forms more resistant elastomers which are, however, insoluble. Therefore, solid state nuclear magnetic resonance has been used in the investigation of such compounds. This work aims to elucidate the effect of the concentration of the sulfur bond formatting agent during the vulcanization process of poly-butadiene through the evaluation of the molecular mobility 10 refs., 3 tabs.

  17. Reduction of greenhouse gases emissions listed in the Kyoto Protocol by the utilization of landfill gas using solid oxide fuel cells; Reducao das emissoes de gases de efeito estufa listados no protocolo de Quioto pelo aproveitamento do gas gerado em aterros sanitarios utilizando celulas a combustivel de oxido solido. Estudo de caso do aterro municipal de Santo Andre, SP, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Paris, Alexandre Gellert

    2007-07-01

    In the last few years, the Kyoto Protocol had been a subject very debated, at first, in a restricted niche, manly academics and professionals related to the area of climate changes. On 16th February 2005 the Kyoto Protocol entered into force and with this a lot of publicity all over the world, so today is common to hear about it at the mass communications media. The extension of the subject is broad, this work discuss the utilization of one the Kyoto's flexibility mechanisms, to contribute to financing the use of the landfill gas in the solid oxide fuel cells. Among the three mechanisms presented in the Kyoto Protocol, the clean development mechanism (CDM) in article 12, is the only one that can be implemented by non-Annex I countries, the case of Brazil. In other hand, the issue of solid waste in Brazil is critical. Even being illegal, most of the solid waste goes to uncontrolled areas in open air places 'lixoes', causing degradation of the environment and the communities around this areas, and also emission of green house gases (GHG), deregulating the global climate system. Decontaminate this areas and the construction of landfills to replace than, considering the landfill as a bioreactor, and the utilization of the biogas to generate power can improve nowadays picture that we are facing. The utilization of an innovative alternative technology as the solid oxide fuel cell (SOFC) instead the conventional technologies will be more efficient and environmentally better. Among other barriers the cost is pointed as the biggest. In this context, the SOFC is the most expensive fuel cell, so the utilization of CDM can contribute to finance the application of this technology. Scenarios were made of 250 kW, 500 kW, 1,000 kW, 5,000 kW and 10,000 kW of installed power using biogas from the Municipal Landfill of Santo Andre. The calculations of the emission factor were done ex ante and ex post according to ACM0002. Comparing the costs of the installed power studied and the calculation of the emission reduction, a potential income, the costs are superior, however, other incomes from the selling of energy and the disposal of solid waste most be taken into account in the process of decision of this type of projects. (author)

  18. Gastrointestinal transit after transverse colostomy: study of solid radiopaque markers progression and others clinical and radiological events - analysis of 20 cases; Transito gastrintestinal apos fechamento de transversostomia: estudo atraves da progressao de marcadores solidos radiopacos e de outros eventos clinicos e radiologicos - analise de 20 casos

    Energy Technology Data Exchange (ETDEWEB)

    Deutsch, Claudio Roberto

    1988-07-01

    The gastrointestinal transit was studied in 20 patients with loop transverse colostomies and previously normal colons. This analysis was performed through radiological observation of progression of 20 radiopaque pellets and measurements of its transit time in the various segments of the digestive tract. An evaluation of other related clinical and radiological events was carried out sentimentality's. In order to better understand the influence of the surgical procedure, the study was performed under similar dietary and supportive care conditions and standard radiological studies before and after the re-establishment of transit, thus enabling a comparison with the same individual. (author)

  19. Characterization of cathode materials SrCoO3 and La0,2Sr0,8CoO3 for use in solid oxide fuel cells (SOFC); Caracterizacao de materiais catodicos SrCoO3 e La0,2Sr0,8CoO3 para aplicacao em celulas a combustivel de oxido solido (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Galvao, G.O.; Aquino, F.M; Silva, R.M.; Medeiros, I.D.M. de, E-mail: gabriela.galvao@cear.ufpb.br [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil)

    2016-07-01

    Mixed oxide ceramics with chemical structure of ABO{sub 3} type are promising candidates for cathodes of solid oxide fuel cells (SOFC) for performing well on the electrical conductivity and thermal stability. Various methods of preparation have been studied and used for the synthesis of these materials. In this study, SrCoO{sub 3} and La{sub 0,2}Sr{sub 0,8}CoO{sub 3} perovskites were synthesized using gelatin as directing agent with the purpose of producing homogeneous and porous particles. The powders obtained at 350 ° C / 2 h were calcined at 600, 800 and 1000 ° C for 4 hours and characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that gelatin is a good polymerizing agent for metal ions as the material showed characteristic peaks of perovskite, with good porosity and uniformity. Furthermore, the method of synthesis employed has advantages related to cost and toxicity, which are very low. (author)

  20. Amino acids separation with the tetracarboxylic derived of the para-ter-butylcalix[4]arene by means of solid-liquid extraction assisted with lanthanides; Separacion de aminoacidos con el derivado tetracarboxilico del para-ter-butilcalix[4]areno mediante extraccion solido-liquido asistida con lantanidos

    Energy Technology Data Exchange (ETDEWEB)

    Bernal R, R. del C.

    2014-07-01

    The tetracarboxylic derived of the para-ter-butylcalix[4]arene (B{sub 4}ACEbL{sup 4}) does not exist commercially for what was synthesized and characterized at laboratory level. The separation of the L-tyrosine amino acid was studied by means of a solid-liquid extraction system with the B{sub 4}ACEbL{sup 4} as solid phase, in function of ph (2.5-7.5) and contact time (5 and 15 hours) to temperature of 15-17 grades C. Resulted that the ph and the contact time were decisive in the extraction percentage of water tyrosine. The lowest percentage was 49% to ph 4 and the highest percentage was 61% to ph 7.5 with 15 hours of contact. In a contact time of 5 hours the extraction was inferior to 32% (ph 4) and of 47% to ph 6.5. The europium effect (Eu (III)) was studied to ph acid in the tyrosine separation and was found that the tyrosine extraction is not increased neither decomposes in europium presence, this is simultaneously extracted by the calixarene but it does not enter in competition for the calixarene with the amino acid. The separate solid phases: calixarene-tyrosine was analyzed by Far infrared radiation (Fir), Mid-Infrared (Mir) spectroscopy and luminescence to check the tyrosine presence in the separate solids as well as the nature of the connection calixarene-tyrosine. In this way was possible to check the tyrosine presence and to propose the formed molecular species tyrosine-calixarene, those which interact mainly by means of hydrogen connections and Van der Waals forces. The liquid phases before and after the extraction were analyzed by UV-Vis spectrophotometry and luminescence. The Neutron activation analysis was used to determine the europium content in the solid and liquid phases of extractions in europium presence. The tyrosine degradation also shows dependence with the ph, obtaining 88% degradation to the 24 hours to ph 7.5, while to ph 3 is degraded the 54% of tyrosine present in the sample. The europium presence does not affect the tyrosine extraction but if its photo catalytic degradation, since increases the tyrosine degradation to 85% to ph 3. The solid-liquid system used for separating L-tyrosine of water to sour ph, neutral and basic as well as the system used for its photo catalytic degradation suggests its possible application in the waters decontamination containing tyrosine and its metabolites. Of course that before using as alternative the studied system, a thorough study of the same system will be required and with other parameters that could affect so much in the tyrosine separation as in its photo catalytic degradation. (Author)

  1. Analysis of the temperature field of an instrument's guard to measure the thermal conductivity of insulating solid materials; Analisis del campo de temperatura de la guarda de un instrumento para medir la conductividad termica de materiales solidos aislantes

    Energy Technology Data Exchange (ETDEWEB)

    Lira Cortes, Leonel; Xaman Villasenor, Jesus P; Chavez Chena Yvonne [CENIDET: Centro Nacional de Investigacion y Desarrollo Tecnologico, Cuernavaca, Morelos(Mexico)

    2000-07-01

    In this paper the analysis of the temperature field of the guard of an instrument called hot plate apparatus with guard (APCG), is presented. The experimental results are compared against the ones that are obtained when solving the problem in analytical form. In the analytical solution the influence of taking into account more than one own value is analyzed and the results when truncating in the first term of sum that corresponds to the first own value and to truncate in the second term that includes the first and second root are compared. The instrument is a parallel flat plate apparatus with guards of 305 mm of diameter and operates in an interval of 10 to 80 of temperature and can measure insulating samples with a maximum thickness of 75 mm with a class of exactness of 4%. In applications of calculation of thermal loads, it is necessary to know the thermal conductivity of insulating and construction materials, when the applications are oriented to the use of renewable energies such as the solar, with the purpose of making an efficient use of this energy. [Spanish] En este trabajo se presenta el analisis del campo de temperatura de la guarda de un instrumento denominado aparato de placa caliente con guarda (APCG). Se comparan los resultados experimentales contra los que se obtienen al resolver el problema en forma analitica. En la solucion analitica se analiza la influencia de tomar en cuenta mas de un valor propio y se comparan los resultados al truncar en el primer termino de la sumatoria que corresponde al primer valor propio y truncar en el segundo termino que incluye la primera y segunda raiz. El instrumento es un aparato de platos planos paralelos con guardas de 305 mm de diametro y opera en un intervalo de 10 a 800 grados Celsius de temperatura y puede medir muestras aislantes con un maximo de espesor de 75 mm con una clase de exactitud del 4%. En aplicaciones del calculo de cargas termicas, es necesario conocer la conductividad termica de materiales aislantes y de construccion, cuando las aplicaciones son orientadas al uso de energias renovables como la solar, con el fin de hacer un uso eficiente de dicha energia.

  2. Novel monolithic materials for miniaturized separation techniques

    OpenAIRE

    Carrasco Correa, Enrique Javier

    2015-01-01

    En esta tesis, se describe el uso de nuevos materiales porosos polimericos y su potencial aplicación en técnicas de separación miniaturizadas. La primera sección (capítulos 1-3), contiene una introducción general, donde el impacto de los materiales polímeros (capítulo 2)en cromatografía es discutido. En el capítulo 3, se presenta una introducción a la caracterización de algunos polímeros y aceites esenciales. Los capítulos 1-3 se escribieron siguiendo la normativa de la Universidad Valencia. ...

  3. Physiological traits for drought phenotyping in cotton = Traços fisiológicos para fenotipagem de algodoeiro sob seca

    Directory of Open Access Journals (Sweden)

    Giovani Greigh de Brito

    2011-01-01

    plantas dos cultivares em estudo atingissem -3,0 MPa, ponto no qual coletaram-se amostras foliares para analises fisiologicas. Apos, irrigou-se as plantas ate a obtencao de valor superior a 50% do potencial hidrico foliar (-1,50 MPa. Avaliaram-se a eficiencia fotoquimica maxima (Fv/Fm, o conteudo de clorofila via indice SPAD, o conteudo relativo de agua (CRA, o extravasamento de eletrolitos, a composicao isotopica do carbono (ƒÂ13C, o rendimento de algodao em caroco por planta e a qualidade da fibra. A disruptura de membrana via extravasamento de eletrolitos e a ƒÂ13C apresentaram-se como potenciais indicadores fisiologicos visando a selecao de genotipos de algodoeiro tolerantes ao deficit hidrico.

  4. In situ lignocellulolytic enzyme production by solid state fermentation

    OpenAIRE

    Mansour, Alicia A.

    2015-01-01

    Un proceso de "Solld State Fermentatlon" de residuos orgánicos para la producción de enzimas lignocellulosicasy la posterior utilización del extracto enzimático para aumentar la biodegradabilidad y la producción de metano de los residuos tratados fue desarrollada a escala laboratorio. Se Identificaron cuatro enzimas deinterés: Total cellulase (FPase), carboxymethylcellulase (CMCase), beta-glucosidase y xyalanase. Dos planes de experiencia consecutivos fueron realizados sobre Residuo Solido Ur...

  5. Calore e termodinamica

    CERN Document Server

    Zemansky, Mark W

    1970-01-01

    Temperatura ; sistemi termodinamici semplici ; lavoro ; il calore e il primo principio ; gas ideali ; teoria cinetica dei gas ideali ; il secondo principio della termodinamica ; reversibilità e temperatura Kelvin ; entropia ; meccanica statistica sostanze pure ; transizioni di fase, elio liquido ed elio solido ; sistemi particolari ; paramagnetismo, fisica delle basse temperature, temperature negative e terzo principio ; superfluidità e superconduttività ; equilibrio chimico ; reazioni con gas ideali ; sistemi eterogenei.

  6. Procedimiento para la obtención de micro- o nanopartículas sólidas

    OpenAIRE

    Ventosa Rull, Nora; Veciana Miró, Jaume; Cano-Sarabia, Mary; Sala Vergés, Santiago

    2008-01-01

    Procedimiento para la obtencion de micro- o nanoparticulas solidas. La invencion proporciona un nuevo procedimiento para la obtencion de micro- o nanoparticulas solidas con estructura homogenea. Se proporciona un procedimiento que permite obtener micro- o nanoparticulas solidas de estructura homogenea, con un tamano de particula inferior a 10 ƒÊm donde el compuesto solido procesado revela la naturaleza, cristalina, amorfa, polimorfica, etc..., propia del compuesto d...

  7. Techniques for contact and contact with friction problems; Tecnicas para problemas de contacto y contacto con friccion

    Energy Technology Data Exchange (ETDEWEB)

    Velandia Arana, Gonzalo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1989-12-31

    Different numerical techniques are presented based in the finite element method to obtain numerical solutions to contact and contact with friction problems between solid bodies, and compared between each other. [Espanol] Se presentan diferentes tecnicas numericas basadas en el metodo de elementos finitos para la obtencion de soluciones numericas de problemas de contacto y contacto con friccion entre cuerpos solidos, y se comparan entre si.

  8. Parámetros de calidad durante la cosecha de durazno (Prunus persica L. Batsch cv. “Rubidoux”

    Directory of Open Access Journals (Sweden)

    Lisney Alessandra Bastidas Parrado

    2015-03-01

    Full Text Available El durazno es una fruta de importancia agrícola como parte de los cultivos caducifolios producidos en Colombia; su calidad y aceptacion comercial, asi como el momento de la cosecha, estan definidos en funcion de sus características fisicoquimicas. Esta investigacion tuvo como propósito caracterizar algunos parametros de calidad de durazno variedad Rubidoux durante el periodo de cosecha, a partir de la seleccion hecha por operarios en campo, de acuerdo al color de la piel como indicador de madurez. Durante seis semanas de la cosecha se evaluaron muestras de frutos, considerando aspectos como peso fresco, contenido de solidos solubles (oBrix, categoria comercial de acuerdo al diametro ecuatorial y color del fruto. Se registro un peso fresco promedio de 130,7 g por fruto, con un contenido de solidos solubles promedio de 11,8 oBrix, parametro que incremento progresivamente de la semana uno a la cinco. La clasificacion visual por el color de la piel permitio definir siete categorias, tres predominaron durante la cosecha (pinton, pinton-maduro y maduro, estos se correspondieron con el contenido de solidos solubles; es asi como el analisis de varianza mostro diferencias estadisticas entre oBrix y el color de piel. Durante el periodo evaluado, se cosecharon con mayor frecuencia duraznos pintones y frutos con diametro entre 60 mm a 70 mm.

  9. Synthesis and characterization of La{sub 1-x}Sr{sub x}MnO{sub 3} (x=0,1) for cathode application in solid oxide fuel cells (SOFC); Sintese e caracterizacao de La{sub 1-x}Sr{sub x}MnO{sub 3} (x=0,1) visando sua aplicacao como catodo em celulas a combustivel de oxido solido (SOFC)

    Energy Technology Data Exchange (ETDEWEB)

    Tarrago, D.P.; Sousa, V.C., E-mail: dptarrago@gmail.co [Universidade Federal do Rio Grande do Sul (LABIOMAT/PPGEM/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos graduacao em Engenharia de Minas. Lab. de Biomateriais; Malfatti, C.F. [Universidade Federal do Rio Grande do Sul (LAPEC/PPGEM/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos graduacao em Engenharia de Minas. Lab. de Pesquisa em Corrosao

    2010-07-01

    Perovskite powders, with composition La{sub 1-x}Sr{sub x}MnO{sub 3} (x=0,1) were obtained via combustion synthesis using sucrose as fuel. In the X-ray diffraction patterns it was observed that in order to obtain a single phase and well crystallized material a calcination in 750 deg C for 3 hours was necessary. BET analysis detected a specific surface area of 45m{sup 2}/g, considerably higher than when obtained with other fuels. SEM micrographs revealed a spongy aspect with a connected porosity in the agglomerates and though TEM micrographs the presence of pores in the particles was verified. The powder compacted with 125MPa and sintered at 1050 deg C for two hours presented a 31% open porosity and the SEM micrographs showed a fine interconnected porosity. (author)

  10. Condensed aromatic rings and E{sub 4}/E{sub 6} ratio: humic acids in gleysoils studied by NMR CP/MAS{sup 13}C, and dipolar dephasing; Aneis aromaticos condensados e relacao E{sub 4}/E{sub 6}: estudo de acidos humicos de gleissolos por RMN de {sup 13}C no estado solido utilizando a tecnica CP/MAS desacoplamento defasado

    Energy Technology Data Exchange (ETDEWEB)

    Saab, Sergio da Costa [Universidade Estadual de Ponta Grossa, PR (Brazil). Dept. de Fisica]. E-mail: scsaab@uepg.br; Martin-Neto, Ladislau [Empresa Brasileira de Pesquisa Agropecuaria, Sao Carlos, SP (Brazil)

    2007-03-15

    In this work, seven samples of humic acids extracted from gleysoils were investigated. These studies, using NMR CP/MAS {sup 13}C techniques, did not show significant correlation between the E{sub 4}/E{sub 6} ratio and the degree of aromaticity. However, dipolar dephasing (DD) measurements of condensed aromatic or substituted carbons showed a negative correlation of 0.94. Also, there was a good correlation between the amount of semiquinone free radicals measured by the EPR technique and condensed aromatic rings measured by NMR CP/MAS {sup 13}C with the DD technique. The content of semiquinone free radicals was quantified by EPR spectroscopy and was correlated with the humification (degree of aromaticity) of the humic substances. The results indicated that the E{sub 4}/E{sub 6} ratio identifies the degree of aromatic rings condensation. It was also found that the degree of aromaticity, measured by NMR, as frequently presented in the literature (by conventional CP/MAS), underestimates aromatic rings in condensed structures. (author)

  11. Synthesis and characterization of the perovskite Sm{sub 0.5}Sr{sub 0.5}CoO{sub 3} for using as cathode in solid oxide fuel cells; Sintese e caracterizacao da provsquita Sm{sub 0.5}Sr{sub 0.5}CoO{sub 3} para utilizacao como catodo em celulas a combustivel de oxido solido

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, P.H.L.; Muccillo, R.; Muccillo, E.N.S. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: enavarro@usp.br

    2008-07-01

    Solid oxide fuel cells are basically constituted by ceramic materials, a solid electrolyte sandwiched between two electrodes. A number of ceramic materials with perovskite structure have been proposed to act as electrode material due to the combination of their physical and chemical properties along with compatibility with the solid electrolyte. In this work the mixed oxide Sm{sub 0,5}Sr{sub 0,5}CoO{sub 3} was synthesized by the cation complexation technique. This perovskite oxide has been proposed as cathode in solid oxide fuel cells that operates in the intermediate temperature range ({approx} 500 to {approx} 700 deg C). Citric acid was used as complexant agent. The thermal decomposition of the precursor material occurs in several stages up to 600 deg C. After calcinations at 700 deg C the mixed oxide exhibits the characteristic perovskite phase of Sm{sub 0,5} Sr{sub 0,5}CoO{sub 3} the microstructure of the thermally decomposed material consists of porous agglomerates. This technique allowed for obtaining a single phase material at a relatively lower temperature. (author)

  12. Images generated by ultra-sound; Imagenes generadas por ultrasonido

    Energy Technology Data Exchange (ETDEWEB)

    Godinez, Valery Francisco; Marcial, Miguel Angel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-01-01

    In this paper are presented the results of a study carried out in order to establish a non-destructive ultrasonic technique for the evaluation of the adherence condition of solid-to-solid interfaces. An important application of this technique is the non-destructive inspection of welds of copper canes of the windings of a generator stator of a hydroelectric power station. The development of the inspection technique required the analysis of ultrasonic images of welds in two cane samples; these images were generated through an ultrasonic scanner type C (C-scan) using a system integrated in the Non-Destructive Testing Laboratory of the Combustion Systems Unit of the Instituto de Investigaciones Electricas (IIE). The analysis allowed the establishment of the adequate configuration of the equipment to be used in the on site inspection, its calibration procedures and the acceptance/rejection criteria of the welds to be examined. Likewise, the correlation among the values of the ultrasonic reflection coefficients measured in the welds and the theoretical values predicted for the adherence in the solid-to-solid interface for a simple model of imperfect interface, is presented. These results are a first step in the quantitative characterization of solid-to-solid joints, that together with future developments might have a technological impact in the determination of the condition of welds by friction, welds with the contribution of melted metal and the adherence degree of coatings on structures exposed to conditions leading to corrosion. [Espanol] En este trabajo se presentan los resultados de un estudio realizado con la finalidad de establecer una tecnica ultrasonica no destructiva para evaluar el estado de adherencia de interfaces solido-solido. Una aplicacion importante de dicha tecnica es la inspeccion no destructiva de las soldaduras de bastones de cobre de los embobinados del estator de un generador de una central hidroelectrica. El desarrollo de la tecnica de

  13. Multiphysical modelling of fluid transport through osteo-articular media

    Directory of Open Access Journals (Sweden)

    Thibault Lemaire

    2010-03-01

    Full Text Available In this study, a multiphysical description of fluid transport through osteo-articular porous media is presented. Adapted from the model of Moyne and Murad, which is intended to describe clayey materials behaviour, this multiscale modelling allows for the derivation of the macroscopic response of the tissue from microscopical information. First the model is described. At the pore scale, electrohydrodynamics equations governing the electrolyte movement are coupled with local electrostatics (Gauss-Poisson equation, and ionic transport equations. Using a change of variables and an asymptotic expansion method, the macroscopic description is carried out. Results of this model are used to show the importance of couplings effects on the mechanotransduction of compact bone remodelling.Neste estudo uma descrição multifísica do transporte de fluidos em meios porosos osteo articulares é apresentada. Adaptado a partir do modelo de Moyne e Murad proposto para descrever o comportamento de materiais argilosos a modelagem multiescala permite a derivação da resposta macroscópica do tecido a partir da informação microscópica. Na primeira parte o modelo é apresentado. Na escala do poro as equações da eletro-hidrodinâmica governantes do movimento dos eletrolitos são acopladas com a eletrostática local (equação de Gauss-Poisson e as equações de transporte iônico. Usando uma mudança de variáveis e o método de expansão assintótica a derivação macroscópica é conduzida. Resultados do modelo proposto são usados para salientar a importância dos efeitos de acoplamento sobre a transdução mecânica da remodelagem de ossos compactados.

  14. Aislamiento de algas del embalse del neusa por medio de cultivos in vitro

    OpenAIRE

    Maldonado, A.; Moreno, E.

    2011-01-01

    EI cultivo de algas a nivel mundial es un oficio de vieja data, pero en Colombia se encuentra en sus primeras etapas de desarrollo. El presente trabajo desarrollado en el Laboratorio de Bioensayos, Departamento de Biología, Universidad Nacional de Colombia está encaminado a aportar técnicas en el desarrollo del cultivo de algas. En la parte practica del trabajo se utilizaron muestras de agua del embalse del Neusa las cuales se cultivaron en medios líquido y solido. Se observo un mejo...

  15. Aislamiento de algas del embalse del Neusa por medio de cultivos In Vitro

    OpenAIRE

    A. Maldonado; E. Moreno

    2000-01-01

    EI cultivo de algas a nivel mundial es un oficio de vieja data, pero en Colombia se encuentra en sus primeras etapas de desarrollo. El presente trabajo desarrollado en el Laboratorio de Bioensayos, Departamento de Biología, Universidad Nacional de Colombia está encaminado a aportar técnicas en el desarrollo del cultivo de algas. En la parte practica del trabajo se utilizaron muestras de agua del embalse del Neusa las cuales se cultivaron en medios líquido y solido. Se observo un mejor crecimi...

  16. Structural and electrical conductivity studies on the solid electrolyte system {sub x}Li2O-(100-x) [0.5B{sub 2}O{sub 3}-0.5 P{sub 2}O{sub 5}] where 20

    Energy Technology Data Exchange (ETDEWEB)

    Padmasree, K. P.; Diaz-Guillen, M. R.; Diaz-Guillen, J. A.; Mendoza, E. M.; Fuentes, A. F. [Cinvestav, unidad Saltillo, Ramos Arizpe, Coahuila (Mexico)]. E-mail: padma512@yahoo.com

    2009-09-15

    Lithium ion conducting glasses have been extensively investigated due to their potential application as solid state amorphous electrolytes in lithium rechargeable batteries. The use of glassy electrolytes in all solid state devices may provide numerous advantages like increased safety, facility of fabrication and miniaturization and having a higher conductivity than those of the crystalline counterparts. In this work, we prepared and studied the Lithium ion conducting glassy solid electrolytes of the composition {sub x}Li{sub 2}O-(1-x)[0.5B{sub 2}O{sub 3} -0.5P{sub 2}O{sub 5}] where 20solido en baterias recargables de litio. El uso de electrolitos vitreos en todos los dispositivos de estado solido puede proporcionar numerosas ventajas como mayor seguridad, facilidad de fabricacion y miniaturizacion, asi como tener una conductividad mas alta que la de sus contrapartes cristalinas. En este trabajo, se prepararon y estudiaron los electrolitos solidos vitreos conductores de ion litio de la composicion {sub x}Li2O-(1-x)[0.5B{sub 2}O{sub 3} -0.5P{sub 2}O{sub 5}] donde 20solido obtenido se caracteriza mediante difraccion de rayos X (DRX), analisis termico diferencial (ATD) y espectrometria infrarroja de la transformada de Fourier (EITF) y tecnicas de espectroscopia por impedancia. La conductividad obtenida es del orden de 10-7S/cm a

  17. Modulation of Spontaneous Brain Activity During Mental Imagery

    Science.gov (United States)

    1989-05-12

    Justlf.oatio_ By Distribut ion / Availability Codes JAvail and/or Dist special * Permanent address: Istituto di Elettronica dello Stato Solido (CNR), via...11-12 (1986); R.J. Ilmoniemi, S.J. Williamson, and W.E. Hostetler, in Biomagnetism 󈨛, K. Atsumi, M. Kotani, S. Ueno, T. Katila, and S.J. William...Marsden, in Biomagnetism : Applications and Theory, H. Weinberg, G. Stroink, and T, Katila, Pergamon, New York, 1984), pp. 46-5 1. 14. The subject was

  18. Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

  19. Aislamiento de algas del embalse del Neusa por medio de cultivos In Vitro

    Directory of Open Access Journals (Sweden)

    A. Maldonado

    2000-07-01

    Full Text Available EI cultivo de algas a nivel mundial es un oficio de vieja data, pero en Colombia se encuentra en sus primeras etapas de desarrollo. El presente trabajo desarrollado en el Laboratorio de Bioensayos, Departamento de Biología, Universidad Nacional de Colombia está encaminado a aportar técnicas en el desarrollo del cultivo de algas. En la parte practica del trabajo se utilizaron muestras de agua del embalse del Neusa las cuales se cultivaron en medios líquido y solido. Se observo un mejor crecimiento de cianofíceas filamentosas en medio solido y algas verdes en medio líquido. Las clamidomonas se ven favorecidas en ambos medios, hecho que permitió aislar una sepa pura de este tipo de algas. Las diatorneas por el hecho de crecer en relación con algas verdes generan un problema metodológico para su aislamiento, que aun se encuentra sin resolver.

  20. Study and optimization of the macroscopic electrical response of carbon based nanocomposites for advanced applications

    Science.gov (United States)

    Silva, Jaime Pedro Oliveira da

    A presente tese centrou-se no estudo da resposta da constante dieletrica e condutividade eletrica em materiais compositos nos quais o reforco tinha uma elevada proporcao entre comprimento e diametro. O objeto de estudo foi o efeito de um reforco com uma elevada razao entre comprimento e diametro, concentracao e orientacao na resposta eletrica e dieletrica de um composito. Estes compositos tem uma grande importancia no desenvolvimento de materiais para sensores e atuadores. Num primeiro momento da dissertacao, explorou-se a resposta da constante dieletrica de um composito constituido por nanotubos de carbono como reforco e uma matriz polimerica. Verificou-se que um aumento da razao entre comprimento e diametro do reforco tem o efeito de aumentar a constante dieletrica do composito para uma igual fracao volumetrica de reforco. Constatou-se tambem que materiais na fase nematica demonstram uma constante dieletrica mais baixa quando comparados com materiais onde o reforco esta distribuido aleatoriamente. Ficou ainda demonstrado nesta dissertacao que materiais na fase nematica com razoes entre o comprimento e diametro diferentes a constante dieletrica segue uma lei de potencia. Numa segunda fase do trabalho, foi explorada a condutividade de nanocompositos polimericos reforcados com nanotubos de carbono, atraves de um modelo baseado em cilindros impenetraveis. Ficou demonstrado que o modelo e apropriado para descrever a condutividade eletrica de um nanocomposito polimerico reforcado com nanotubos. As simulacoes desenvolvidas demonstram que, aumentando a razao entre o comprimento e o diametro dos nanotubos de carbono, aumenta a condutividade eletrica do nanocomposito. No entanto, verifica-se que aumentando a anisotropia diminui a condutividade, sendo este efeito mais evidente para fracoes volumetricas maiores. Nesta dissertacao comprovou-se ainda que uma microestrutura gerada por um algoritmo de empacotamento sequencial pode ser descrita por um grafo aleatorio e que a

  1. Relatività esposizione divulgativa : e scritti classici di Descartes, Newton, Lobacevskij, Riemann, Helmholtz, Maxwell, Poincaré, Einstein su spazio, geometria, fisica

    CERN Document Server

    Einstein, Albert

    1967-01-01

    Nello stato magmatico della fisica novecentesca Albert Einstein è il nucleo solido, la roccia stabilmente configurata che sta al centro. Di qui la sua posizione di "classico", come testimonia al più alto livello questa esposizione della teoria della relatività. Una teoria che ha segnato un vero mutamento di paradigma, non solo in campo scientifico: la potenza teorica dell'equivalenza relativistica massa-energia ha trovato, come sappiamo, la sua tragica verifica a Hiroshima, nel terrificante potenziale distruttivo della bomba atomica. Oggi, a oltre un secolo dalla originaria formulazione einsteiniana, è la comprensione della "relatività della relatività" che vuol essere perseguita. A introdurre il lettore a questa nuova dimensione provvede un'antologia di scritti di quegli autori che fondarono la scienza fisico-matematica classica e ne avviarono l'evoluzione in senso relativistico.

  2. Measurements of magnetic anisotropy in sickle cells

    International Nuclear Information System (INIS)

    Salvo Souza, L.H. de.

    1982-03-01

    Room temperature magnetic measurements in deoxigenated sickle cells showed the existence of magnetic anisotropy, Δchi=1,29 x 10 -3 . This effect was supposed paramagnetic and considered to be due to the iron atoms of the hemoglobin molecules which are one over the other, forming ordered chains inside the erythrocytes. Low temperature (liquid He - 4,2K) measurements of the magnetic anisotropy of sickle cells and normal red blood cells diluted in a cryoprotector was made to confirm the paramagnetic origin of the fenomena. For that purpose it was used a superconductor magnetometer coupled to a SQUID, developed in the 'Laboratorio do Estado Solido do Departamento de Fisica da PUC-RJ'. The results obtained seem to confirm the expected paramagnetic anisotropy and, furthermore, suggest the presence of magnetic interactions among the iron atoms in the sickle cells samples. (Author) [pt

  3. Cogeneration projects in PEMEX refining; Proyectos de cogeneracion en PEMEX Refinacion

    Energy Technology Data Exchange (ETDEWEB)

    Becerra O' Leary, Jose [Petroleos Mexicanos (Mexico)

    2006-10-15

    Mexican Petroleum proposes the electric power cogeneration, the energy consumption and rationalization as well as the operative performance improvement. This is the reason Pemex refining considers the cogeneration projects development possibility related with the Refining National System to supply the six refineries with steam and electric power. And also the energy auto-supply to other Pemex refining, using the liquid and solid residuals as fuels for petroleum refining. [Spanish] Petroleos Mexicanos propone la Cogeneracion de energia electrica, el aprovechamiento y la racionalizacion del consumo de energia, asi como el mejoramiento del desempeno operativo, por lo cual Pemex Refinacion plantea la posibilidad del desarrollo de proyectos de Cogeneracion asociados a las refinerias del Sistema Nacional de Refinacion, para abastecer de vapor y energia electrica a cada una de las seis refinerias, asi como el autoabastecimiento de energia a otras instalaciones de Pemex Refinacion, utilizando como combustibles los residuales liquidos y solidos de la refinacion del petroleo.

  4. Análisis de cocaína en diferentes muestras por cromatografía de gases con detector de ionización de llama (CG-FID)

    OpenAIRE

    Ángela M. López C.; William F. Garzón M; Milton Rosero-Moreano; Gonzalo Taborda O.

    2015-01-01

    En este estudio se realizó la validación de los métodos establecidos por la UNODC para la cuantificación y extracción de benzometilecgonina (cocaína) presente en las hojas de Erythhroxylum coca, en té de coca y en clorhidrato de cocaína. El primer método de extracción, recomendado por la UNODC, es una extracción solido-líquido (ESL), sin embargo, los resultados obtenidos indican que esta no es lo suficientemente eficiente para lograr una señal de analito distinguible de la relación señal a ru...

  5. Claridad con las cosas: ¿Un día después? Contribución al debate sobre la "dispensa del celibato clerical"

    Directory of Open Access Journals (Sweden)

    Alberto Echeverri

    2016-06-01

    Full Text Available No han solido ser materia de discusión teológica documentos como el rescripto de “dispensa del celibato sacerdotal” emitido por la Congregación del Clero. Sin embargo, sus elementos doctrinales y la pertinente concreción disciplinar hacen parte esencial de la manera como, en la iglesia católica romana, continuarán viviendo su fe quienes lo han recibido. Un examen atento del texto, que releve en él tanto la presencia de los criterios evangélicos como sus posibles ausencias en el contexto de las indispensables referencias históricas a la cuestión del celibato ministerial y con atención al magisterio conciliar de Vaticano II, contribuye a un replanteamiento teológico, y en consecuencia canónico, de este tipo de medidas administrativas en la iglesia.

  6. Conoscere Fermi nel centenario della nascita : 29 settembre 1901 - 2001

    CERN Document Server

    Bonolis, Luisa

    2001-01-01

    Il lavoro scientifico di Fermi riguarda molti campi disparati, ciascuno dei quali ha avuto uno sviluppo peculiare in tempi successivi alla morte. In questo volume un certo numero di specialisti contemporanei di ciascun settore espone in forma semplice l'idea originaria e la sua successiva evoluzione. INDICE. Carlo Bernardini, "Introduzione"; Giorgio Salvini, "Enrico Fermi. La sua vita, ed un commento alla sua opera"; Edoardo Amaldi, "Commemorazione del Socio Enrico Fermi"; Enrico Persico, "Commemorazione di Enrico Fermi"; Franco Rasetti, "Enrico Fermi e la Fisica Italiana"; Franco Bassani, "Enrico Fermi e la Fisica dello Stato Solido"; Giorgio Parisi, "La statistica di Fermi"; Giovanni Gallavotti, "La meccanica classica e la rivoluzione quantistica nei lavori giovanili di Fermi"; Tullio Levi-Civita, "Sugli invarianti adiabatici"; Bruno Bertotti, "Le coordinate di Fermi e il Principio di Equivalenza"; Marcello Cini, "Fermi e l'elettrodinamica quantistica"; Nicola Cabibbo. "Le interazioni deboli"; Ugo Amaldi, "...

  7. Spores of anaerobic clostridia for a quantitative chemical analysis methodology; Metodo per la determinazione delle spore di clostridi solfito-riduttori in campioni di sedimenti, fanghi di depurazione, suolo e prodotti di compostaggio

    Energy Technology Data Exchange (ETDEWEB)

    Bonadonna, L.; Marini, R. [Istituto Superiore di Sanita' , Rome (Italy)

    2001-02-01

    The described analytical procedure allows the quantitative enumeration of the parameter Spores of Anaerobic Clostridia in solid matrixes, such as sediment, sludge, soil and compost. The present technique should be an useful reference method for all the laboratories working on the hygienic quality control of the environment. [Italian] Viene descritto il metodo analitico per la determinazione quantitativa delle Spore di Clostridi solfito-riduttori. Il parametro viene generalmente ancora quantificato con metodiche piu' adatte per l'analisi delle acque. Il metodo qui riportato, modifica invece la procedura di rilevamento per adeguarla all'analisi di materiale solido, quali sedimento, fango di depurazione, suolo e prodotti di compostaggio e vuole essere uno strumento applicativo di riferimento utile alla pianificazione e all'unificazione delle procedure analitiche per le strutture che operano nel settore del controllo della qualita' igienico-sanitaria ed ambientale di specifiche matrici ambientali.

  8. Manuale di ottica

    CERN Document Server

    Giusfredi, Giovanni

    2015-01-01

    Questo libro costituisce un fondamento solido per la conoscenza dell’Ottica Fisica, presentando vari modi di trattare la propagazione di onde elettromagnetiche e indicando quali siano i metodi utili a specifici casi. Iniziando dall’elettromagnetismo, la riflessione, la rifrazione e la dispersione delle onde, espone argomenti quali l’Ottica Geometrica, l’Interferenza, la Diffrazione, la Coerenza, i fasci Laser, la Polarizzazione, la Cristallografia e l’Anisotropia. Tratta componenti ottici come lenti, specchi, prismi, interferometri classici, Fabry-Perot e cavità risonanti, multistrati dielettrici, filtri interferenziali e spaziali, reticoli di diffrazione, polarizzatori e lamine birifrangenti. Vi sono inoltre argomenti poco reperibili, come il metodo delle matrici 4x4 per lo studio di fronti d’onda generalmente astigmatici, i metodi numerici tramite FFT per il calcolo della diffrazione, e la Bi-anisotropia, che tratta relativisticamente l’attività ottica e gli effetti Faraday e Fresnel-Fizeau....

  9. Comportamiento fisiológico y fisico-químico en la poscosecha de curuba de castilla (Passiflora mollissima Bailey conservada en refrigeración y temperatura ambiente

    Directory of Open Access Journals (Sweden)

    Tellez Claudia Patricia

    1999-12-01

    Full Text Available

    Con el objetivo de evaluar las características fisico-quimicas y fisiológicas en postcosecha de dos cultivares nuevas de Curuba de Castilla, 'Ruizquin l' Y 'Ruizquin 2', promisorios para la exportación, los frutos fueron mantenidos unos a 8°C (cuarto frio y otros a 20°C (temperatura ambiente. En general, durante los días de almacenamiento, se pudo determinar que el valor del pH aumenta ligeramente, mientras la acidez total titulable disminuye gradualmente; el peso del fruto y la consistencia de la pulpa se pierden rápidamente; el contenido de los solidos solubles totales se disminuye, especialmente a partir de 19-22 días de la conservación y la relación solidos solubles totales/acidez total titulable (SST/ATT aumenta lentamente. La curva de la respiración, en todos los tratamientos estudiados, presenta un comportamiento climatérico. En el tratamiento con 8°C, se observo una perdida mas lenta de peso y consistencia, una intensidad respiratoria mas baja y un retardo del climaterio hasta el día 12 a 14 del almacenamiento, una mayor cantidad de so1idos solubles totales, un menor valor de pH en el jugo, un mayor porcentaje de acidez y una menor relación de SST/ATI, comparado con la conservación del fruto a temperatura ambiente.

     

  10. Biogas from sanitary landfills for electricity production; Biogas de rellenos sanitarios para produccion de electricidad

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu F, Jose L; Huacuz V, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2003-07-01

    There are many ways to eliminate the municipal solid wastes, but only a few help to treat them and to dispose of them suitably. Some of the forms to avoid the problems that the trash originate are: not to produce it, recycling it in a 100% or creating a fictitious market where its value is equal to or greater than the product that gave origin to it; in any case, these alternatives are not absolutely practical. The trash can be incinerated, be segregated, be recycled partially or also be arranged in sanitary landfills. Anyway, the trash has always existed and it will continue existing for sure. [Spanish] Existen muchas maneras de eliminar los residuos solidos municipales, pero solo unas pocas ayudan a tratarlos y disponerlos adecuadamente. Algunas de las formas para evitar los problemas que ocasiona la basura son: no produciendola, reciclandola en un 100% o creando un mercado ficticio donde su valor sea igual o mayor al del producto que le dio origen; en cualquier caso, estas alternativas no son del todo practicas. La basura tambien se puede incinerar, segregar, reciclar parcialmente o disponer en rellenos sanitarios. De cualquier manera, la basura siempre ha existido y seguramente seguira existiendo.

  11. Pulsed laser deposition of II-VI and III-V semiconductor materials

    Energy Technology Data Exchange (ETDEWEB)

    Mele, A.; Di Palma, T.M.; Flamini, C.; Giardini Guidoni, A. [Rome, Univ. `La Sapienza` (Italy). Dep. di Chimica

    1998-12-01

    Pulsed laser irradiation of a solid target involves electronic excitation and heating, followed by expansion from the target of the elliptical gas cloud (plume) which can be eventually condensed on a suitable substrate. Pulsed laser ablation has been found to be a valuable technique to prepare II-VI and III-V thin films of semiconductor materials. Pulsed laser ablation deposition is discussed in the light of the results of an investigation on CdS, CdSe, CdTe and CdSe/CdTe multilayers and AIN, GaN and InN together with Al-Ga-In-N heterostructures. [Italiano] L`irradiazione di un target solido, mediante un fascio laser impulsato, genera una serie di processi che possono essere schematizzati come segue: riscaldamento ed eccitazione elettronica del target, da cui consegue l`espulsione di materiale sotto forma di una nube gassosa di forma ellissoidale (plume), che espande e puo` essere fatta depositare su un opportuno substrato. L`ablazione lasersi e` rivelata una tecnica valida per preparare film sottili di composti di elementi del II-VI e del III-V gruppo della tavola periodica. La deposizione via ablazione laser viene discussa alla luce dei risultati ottenuti nella preparazione di film di CdS, CdSe, CdTe e di film multistrato di CdSe/CdTe, di film di AIN, GaN, InN e di eterostrutture di Al-Ga-In-N.

  12. Efecto de inclusión de anticoagulantes durante el beneficio de Hevea brasiliensis (Willd. ex A.Juss. Müll.Arg.

    Directory of Open Access Journals (Sweden)

    Lina Paola Mendoza Vargas

    2018-01-01

    Full Text Available Se evaluó el efecto de un agente anticoagulante del látex en el árbol de caucho (Hevea brasiliensis. Se caracterizó el contenido de solidos totales (TSC y contenido de caucho seco (DRC del látex, se evaluaron cuatro tratamientos de anticoagulantes en campo: (T1 amoniaco, (T2 bórax, (T3 amoniaco-bórax y (T0 sin anticoagulante. En las láminas se evaluaron cinco diluciones (v/v de látex en agua D1 (100 %, D2 (75 %, D3 (50 %, D4 (25 % y D5 (0 %, a estas se hicieron pruebas de tensión, compresión y espesor. El látex caracterizado obtuvo TSC (37.1 %+0.27, DRC (34.3 %+0.19. Encontrándose en T3D1 mayor resistencia de tensión hasta punto de ruptura de 13.37 KgF, compresión de 5 KgF, y menor espesor de 1.52 mm, sin diferencia significativa entre los tratamientos T3 y T2 y las diluciones D1 a D2, posibilitando reducir el consumo de agua (25 %, y la producción de ripio (38 % con anticoagulantes, sin afectar negativamente sus propiedades mecánicas.

  13. Electrochemical generation of energy: from the portable electronic devices to industrial plants; Generacion electroquimica de energia electrica: de los dispositivos electronicos portatiles a las plantas industriales

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Varela, Javier [Centro de Investigacion y de Estudios Avanzados (CINVESTAV), Unidad Saltillo (Mexico)

    2006-10-15

    This article proposes the electrical energy generation via electrochemistry as substitute of petroleum and discusses on the development of low and high temperature fuel cells fed by diverse types of fuels: electrolyte fuel cells of polymeric membrane, PEM cells H{sub 2}/O{sub 2}, cell of direct alcohol consumption, PEM cells and bio-fuel cells, SOFC cells and bio-fuel cells. It presents its constitution, operation principles, and use plausibility, present situation in the market, advantages and disadvantages, as well as already made cell insertion projects. [Spanish] Este trabajo propone la generacion de energia electrica via electroquimica como sustituto del petroleo y discurre sobre el desarrollo de celdas de combustible de baja y alta temperatura alimentadas por diversos tipos de combustibles: celdas de combustible de electrolito de membrana polimerica, celda PEM H{sub 2}/O{sub 2}, celda de consumo directo de alcohol, celdas PEM y biocombustibles, celdas de combustible de oxido solido y biocombustibles. Expone su constitucion, principios de operacion, plausibilidad de uso, situacion actual en el mercado, ventajas y desventajas, asi como proyectos de insercion de celdas ya realizados.

  14. The silicon and their properties as sensor material; El silicio y sus propiedades como material sensor

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval-Ibarra, F. [Centro de Investigacion y de Estudios Avanzados-Unidad Guadalajara, Jalisco (Mexico)

    2001-04-01

    This paper focused on the design considerations of silicon based transducers. The reason for this is twofold. First of all, silicon is a suitable material for the development of fully integrated transducers, which can be manufactured with any IC fabrication process. The second reason is to describe the possibilities to design the so-called smart sensors. In this way, an overview has been created with the purpose to write a useful reference for the beginner and for the expert sensor designer. [Spanish] Este articulo describe las consideraciones de diseno de diversos transductores basados en silicio. El proposito es doble: 1) el silicio es un material semiconductor adecuado para el desarrollo de transductores completamente integrados, los cuales pueden ser fabricados con procesos de fabricacion estandar de circuitos integrados; 2) si el desarrollo de transductores es compatible con procesos de fabricacion estandar, entonces se describen las capacidades para el desarrollo de sensores integrantes. Por lo anterior, se realiza una revision bibliografica con la intencion de elaborar una referencia que sea util para el principiante y para el disenador de sensores de estado solido.

  15. Analysis of conjugated heat transfer, in transient state of the first stage of a gas turbine; Analisis de transferencia de calor conjugada, en estado transitorio, de la primera etapa de una turbina de gas

    Energy Technology Data Exchange (ETDEWEB)

    Campos Amezcua, Alfonso; Mazur C, Zdzislaw [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Gallegos Munoz, Armando [Facultad de Ingenieria Mecanica, Electrica y Electronica (FIMEE), Universidad de Guanajuato, Guanajuato (Mexico)

    2007-11-15

    This article presents an analysis of conjugated heat transfer in the first stage of movable blades during the starting of a gas turbine, covering a period of 1,012 seconds. The developed computer model is in 3D and uses as initial and border conditions typical starting curves for stack gases, the cooling air and the angular velocity of the blades. As a result of the numerical predictions, the temperature distributions in stack gases, the trowel of the blade and the cooling air are included, doing emphasis in the results obtained in the solid (body of the blade), since these are used for thermo-mechanical stress analysis and later estimation of the blade residual life. [Spanish] Este articulo presenta un analisis de transferencia de calor conjugada en la primera etapa de alabes moviles, durante el arranque de una turbina de gas, cubriendo un periodo de 1.012 segundos. El modelo computacional desarrollado es en tres dimensiones y utiliza como condiciones iniciales y de frontera curvas de arranque tipicas para los gases de combustion, el aire de enfriamiento y la velocidad angular de los alabes. Como resultado de las predicciones numericas, se incluyen las distribuciones de temperatura en los gases de combustion, la paleta del alabe y el aire de enfriamiento, haciendo enfasis en los resultados obtenidos en el solido (cuerpo del alabe), ya que estos se utilizan para analisis de esfuerzos termomecanicos y posterior estimacion de vida residual del alabe.

  16. Manejo de las mieles generadas en la tecnología BECOLSUB para eliminar el impacto ambiental ocasionado por los lixiviados de café.

    Directory of Open Access Journals (Sweden)

    Narváez Morales Luis Hernando

    2003-12-01

    Full Text Available En CENICAFE se evaluó una alternativa para eliminar el impacto ambiental generado por los lixiviados producidos por el beneficio del café denominada BECOLSUB, la cual consistió de dos etapas: en la primera, se mezclan con la pulpa el 61.23% de los fluidos resultantes del proceso de desmucilaginado mecánico (básicamente mucilago, agua adicionada e impurezas y en la segunda se retiran manualmente los insolubles presentes en el flujo no mezclado con la pulpa y se aumenta la concentración de sólidos, utilizando un evaporador rustico operado con energía térmica proveniente de una estufa campesina. Con el evaporador en las condiciones de trabajo de la estufa (15 h/d se logra controlar el 100% de la contaminación generada por los lixiviados en una finca con producción anual de 240 de café pergamino se por año (cps/año (15.000 kg de café cereza (cc que utilice la tecnología BECOLSUB. La eficiencia térmica del evaporados y del sistema global fueron 57.01% y 20.74% respectivamente. El fluido concentrado presento 295.000 ppm de DQO y 164254 ppm de solidos totales (ST y 35% de grados brix.

  17. Beam propagation in Cu +-Na + ion exchange channel waveguides

    Energy Technology Data Exchange (ETDEWEB)

    Villegas Vicencio, L. J.; Khomenko, A. V.; Salazar, D.; Marquez, H. [Centro de Investigacion Cientifica y de Educacion Superior de Ensenada, Baja California (Mexico); Porte, H. [Universite de Franche-Comte, UFR des Sciences et Techniques, Besancon, Cedex (France)

    2001-06-01

    We employ the fast Fourier transform beam propagation method to simulate the propagation of light in graded index channel waveguides, these have been obtained by solid state diffusion of copper ions in soda-lime glass substrates. Longitudinal propagation has been simulated, the input light beam has a gaussian profile. Two cases have been analyzed, in the first, the Gaussian beam is collinear center to center with respect to waveguide; in the second, a small lateral offset and angular tilt have been introduced. Modal beating and bending effects have been founded. We have proven the validity of our numerical results in detailed comparison with experimental data. [Spanish] Se ha empleado el metodo de propagacion de haces por la transformada rapida de Fourier para simular la propagacion de la luz en guias de onda de indice de gradiente. Estas han sido fabricadas por difusion de iones de cobre en estado solido en substratos de vidrios sodicos-calcicos. Se han simulado dos casos, el primero, el perfil de luz de entrada, que es gaussiano, es colineal centro a centro respecto al centro de la guia de ondas: el segundo, se ha dado un pequeno corrimiento lateral y una inclinacion angular. Como consecuencia de los casos anteriores se ha observado efectos de batimiento modal. Los resultados de la simulacion se han validado con resultados experimentales.

  18. Utilization of sites of final disposition of municipal wastes for electrical power generation; Aprovechamiento de sitios de disposicion final de residuos municipales para generacion de energia electrica

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Sanchez, Felipe; Sarmiento Bleicher, Conrado [Departamento del Distrito Federal (Mexico)

    1996-07-01

    Mexico confronts very comprehensive environmental problems, and the solid wastes and their control are not the minor of the preoccupations on the matter. The present work tries to demonstrate the usefulness or the economic advantages and the use of a sanitary land fill as a power source, outlining the necessity and convenience of planning and of designing the future sanitary land fills, specially those of the important urban centers, thinking of its usefulness beyond a confinement of the materials that lack use or commercial value. [Spanish] Mexico afronta una problematica ambiental muy amplia, y los residuos solidos y su control no son la menor de las preocupaciones al respecto. El presente trabajo trata de demostrar la utilidad o rentabilidad del aprovechamiento de un relleno sanitario como fuente energetica, perfilando la necesidad y conveniencia de planear y disenar los futuros rellenos sanitarios, especialmente los de los centros urbanos importantes, pensando en su utilidad mas alla de un confinamiento de los materiales que carecen de uso o valor comercial.

  19. Precios inflexibles y la gran depresión Inflexible prices and the great depression

    Directory of Open Access Journals (Sweden)

    Lee Frederick S.

    2000-06-01

    Full Text Available Este articulo expone la teoria y la tesis de precios administrados de Gardiner Means, analiza sus efectos sobre la gran depresion y presenta las criticas y propuestas de los defensores de la teoria neoclasica. Revisa empiricamente la propuesta de Means y señala sus limitaciones y verdaderos alcances. Por ultimo, muestra que si la tesis Means y las propuestas Keynesianas se hubiesen unido en 1940, la sintesis resultante habria dado lugar a una teoria coherente, con solidos funadamentos empiricos, alternativa a la teoria neoclasica tradicional.This article presents Gardiner Means' theory and thesis of administeredprices, analyzes their effects on the Great Depression, andpresents the critiques and proposals of the defenders of Neoclassical Theory. It reviews Means' proposal empirically, and indicates its limitations as well as its real significance. Finally, it shows thatif the Means thesis and Keynesian proposals had been joined togetherin 1940, the resulting synthesis would have provided a coherent alternative to traditional Neoclassical Theory with solid empirical foundations.

  20. "Estudio tribologico de aceros para moldes. Aplicacion al moldeo por inyeccion de polibutilentereftalato reforzado con fibra de vidrio"

    Science.gov (United States)

    Martinez Mateo, Isidoro Jose

    Mould materials for injection moulding of polymers and polymer-matrix composites represent a relevant industrial economic sector due to the large quantity of pieces and components processed. The material selection for mould manufacturing, its composition and heat treatment, the hardening procedures and machining and finishing processes determine the service performance and life of the mould. In the first part of the present study, the relationship between the hardness and microstructure and the wear resistance of mould steels from large blocks has been studied by pin-on-disc tests, studying the main wear mechanisms. In order to determine the surface damage on mould steels under real injection conditions, different commercial steels have been studied by measuring the variation of surface roughness with the number of injected pieces with different reinforcement percentages and different mould geometries, by using optical profilometry and scanning electron microscopy techniques. It was important to determine the variation of surface roughness of the moulded pieces with the number of injection operations. The materials used were polybutyleneterephthalate pure and reinforced with either 20% or 50% glass fibre. For the different mould designs, the evolution of the glass fibre orientation with injection flow has been determined by image analysis and related to roughness changes and surface damage, both of the composite parts and of the mould steel surface. Finally, the abrasion resistance of the composite parts has been studied by scratch tests as a function of the number of injected parts and of the scratch direction with respect to injection flow and glass fibre orientation. Los materiales para moldes de inyeccion de polimeros y materiales compuestos representan un sector economicamente muy relevante debido al gran aumento del numero de componentes fabricados a partir de materiales polimericos obtenidos mediante moldeo por inyeccion. La seleccion del material para la

  1. Regional assessment of anthropogenic impacts on air, water and soil, case: Huasteca Hidalguense, Mexico; Evaluacion regional del impacto antropogenico sobre aire, agua y suelo, caso: Huasteca Hidalguense, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Gordillo Martinez, Alberto Jose; Cabrera Cruz, Rene Bernardo Elias; Hernandez Mariano, Marisol; Galindo, Erick; Otazo, Elena; Prieto, Francisco [Centro de Investigaciones Quimicas, Universidad Autonoma del Estado de Hidalgo, Pachuca, Hidalgo (Mexico)]. E-mail: gordillo@uaeh.edu.mx; rcabreracruz@yahoo.com.mx

    2010-08-15

    aire por vehiculos a gasolina fueron un total de 11 039 ton/ano, los vehiculos a diesel emitieron 1521 ton/ano. Para agua, las fuentes industriales aportaron 22 496 ton/ano, las domesticas 15 776 ton/ano. La contaminacion emitida al suelo por residuos solidos industriales fue de 4025 ton/ano, los residuos solidos urbanos emitieron 62 121 ton/ano. Por municipio, Huejutla de Reyes fue el mas contaminado en aire, agua y suelo con 53 % del total. A partir de estos resultados fue evaluada la calidad ambiental de cada medio, que con base en la normatividad mexicana, no es admisible para agua y suelo. Se construyo una base de datos con informacion relevante que apoyara el manejo eficiente de las emisiones contaminantes, la realizacion de estudios complementarios y promovera la futura conservacion de la calidad ambiental y la riqueza biologica de la zona.

  2. Technical and environmental aspects of combined cycle power stations with integrated gasification (CCGI); Aspectos tecnicos y medioambientales de las centrales de ciclo combinado con gasificacion integrada (CCGI)

    Energy Technology Data Exchange (ETDEWEB)

    Beltran Mora, Hector Alejandro; Urias Romero, Francisco [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2004-06-15

    A description is presented of the operation of the Combined Cycle Power Stations with Integrated Gasification (CCGI) where the use of solid fuels (coal, vacuum residues, petroleum coke, and biomass) or liquids is possible in a thermal power station with the efficiency and many of the own environmental benefits of the combined cycles. The gasification process is analyzed, that is a thermo-chemical process by means of which a fuel that is in solid state or liquid becomes to the gaseous state by means of a partial oxidation and the obtained gas of this process is called synthesis gas (syngas, by its abbreviations in English) that is used in Combined Cycle Power Stations as a substitute for the natural gas. Also the other components of this type of power stations are shown, such as the air separating unit, and some of the modifications that are due to make to adapt a gas turbine so that it uses syngas, and the considerations of their integration with the air separating unit to optimize the operation of the plant are detailed. A comparison of efficiency values of power stations CCGI with the conventional carbon-electric and the power stations of combined cycle that use natural gas is also shown. Finally the emissions of pollutants of SO{sub 2}, NO{sub x} and CO{sub 2} are analyzed. The possibility of using fuels like petroleum coke and vacuum tower residues that are produced in the Cadereyta refinery is studied for the possible construction of a CCGI power station in Mexico. [Spanish] Se presenta la descripcion del funcionamiento de las centrales ciclo combinado con gasificacion integrada (CCGI) donde es posible el uso de combustibles solidos (carbon, residuos de vacio, coque de petroleo, biomasa) o liquidos en una central termica con la eficiencia y muchos de los beneficios ambientales propios de los ciclos combinados. Se analiza el proceso de gasificacion, que es un proceso termoquimico mediante el cual se convierte un combustible que se encuentra en estado solido o

  3. Development of a microwave dielectric spectroscopy system for materials characterization using the open-ended coaxial probe technique

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Ruiz, I.; Aviles-Castro, D. [Centro Nacional de Metrologia, Queretaro (Mexico); Jardon-Aguilar, H. [Instituto Politecnico Nacional, Mexico, D. F. (Mexico)

    2001-02-01

    algunas ventajas sobre otras como las tecnicas optica y el analisis quimico: es muy rapida, facil de implantar, requiere minima o ninguna preparacion de la muestra a medir, puede ser no destructiva y minimamente intrusa. En este articulo se describe el desarrollo de un sistema de espectroscopia dielectrica en el intervalo de frecuencias de microondas (50 MHz-20GHz), usando una sonda coaxial abierta como sensor. El sistema completo esta formado por un analizador de redes vectorial, un cable coaxial de microondas, la sonda, un porta-muestras y una computadora para automatizacion de mediciones y procesamiento de datos. El sistema se ha utilizado para medir algunos materiales liquidos y solidos tales como alcohol, agua y teflon. Se presentan las partes real e imaginaria de la permitividad como funcion de la frecuencia medidas para mezclas de alcohol, de cana y agua desionizada, tequila y teflon. Haciendo consideraciones de exactitud y repetibilidad de las mediciones, se identifico que la incertidumbre de los materiales de referencia y la repetibilidad del sistema son las fuentes mas importantes de error. Tambien, se encontro que la tecnica de la sonda coaxial abierta resulta apropiada no solo para medir liquidos, sino tambien solidos. Algunos de los resultados obtenidos fueron comparados con valores de la literatura observandose buena convergencia.

  4. La Corte Constitucional: usurpadora o garantista

    Directory of Open Access Journals (Sweden)

    Clara López Obregón

    2001-12-01

    Full Text Available En uno de sus textos, Amartya Sen señala que «la economía moderna se empobreció en forma sustancial debido a la distancia que se ha abierto entre la ética y la economía» , ya que, como consecuencia de ese divorcio, la ciencia económica ha tenido una visión estrecha de las motivaciones del comportamiento humano y del significado del desarrollo social. Pero a su vez, señala Sen, este distanciamiento también ha perjudicado a la ética, que ha perdido la posibilidad de usar el fino instrumental analítico de la economía, para enriquecer sus visiones, y en especial para poder tomar en cuenta en sus análisis normativoslas complejas interdependencias que existen entre los comportamientos de los distintos agentes sociales.Esta reflexión de Sen puede ser proyectada a la relación, también bastante problemática, que se ha dado entre la economía y el derecho. La separación académica que durante mucho tiempo ha existido entre esas disciplinas ha tenido efectos empobrecedores para ambas. La economía ha solido desconocer la importancia que tienen la dimensión normativa y los arreglos institucionales en el comportamiento de los agentes económicos y en el significado del propio desarrollo, mientras que el olvido de los condicionamientos económicos puede llevar al análisis jurídico a moverse en abstracciones desvinculadas de la dinámica objetiva de los procesos sociales.

  5. Calidad de leches crudas en sistemas doble propósito en Córdoba (Colombia, en condiciones de máxima y mínima precipitación

    Directory of Open Access Journals (Sweden)

    Virginia Consuelo Rodríguez-Rodríguez

    2015-07-01

    Full Text Available Una de las preocupaciones en la producción agropecuaria es la obtención de alimentos de óptima calidad e inocuos para el consumo humano. Se ha propuesto que una leche de excelente calidad debe presentar altos porcentajes de proteína, grasa y sólidos totales, así como bajos recuentos de mesófilos y de células somáticas, y estar libre de inhibidores, para asegurar su inocuidad. El objetivo de este estudio fue conocer la calidad fisicoquímica y el recuento de las células somáticas (RCS en leches crudas provenientes de empresas ganaderas doble propósito en el departamento de Córdoba, Colombia, y comparar estos datos en periodos de máxima y mínima precipitación, para ver las diferencias fisicoquímicas y el RCS en cada época. Mediante un muestreo no probabilístico y un estudio descriptivo en época de máxima y mínima precipitación, se recolectaron muestras de leche cruda en 127 empresas ganaderas. Se determinaron los porcentajes de acidez, de grasa, de sólidos no grasos, de solidos totales y de células somáticas. Los datos obtenidos se analizaron por estadística descriptiva usando INFOSTAT. Estos valores se encontraron dentro de los parámetros normales, con variaciones en relación con la época en que se muestreó.

  6. Niveles y distribución de metales pesados en el agua de la zona de playa de Riohacha, La Guajira, Colombia

    Directory of Open Access Journals (Sweden)

    Carlos Doria Argumedo

    2015-03-01

    Full Text Available La zona de playa de Riohacha, La Guajira, Colombia, constituye un ecosistema muy rico, diverso y productivo, dotado de gran capacidad para proveer bienes y servicios que sostienen actividades como pesca, turismo y navegacion; sin embargo, experimenta problematicas ambientales producto de la dinamica de la ciudad, relacionadas con la infiltración de aguas residuales, acumulacion de residuos solidos organicos y descargue de sedimentos del rio Rancheria. En la metodologia de esta investigación se tomaron muestras de agua de mar en cuatro puntos de un sector de aproximadamente 2.5 km de playa, durante ocho meses en el ano 2013, en epocas de lluvia y sequia. Los metalesanalizados fueron Cobalto, Cobre, Zinc, Aluminio, Manganeso, Niquel y Hierro. Las concentraciones de los metales Ni y Zn, considerados muy toxicos, se encontraron por encima de los niveles segun la normativa nacional y algunas establecidas a nivel internacional, para efectos agudos en aguas marinas y estuarinas destinadas a la preservacion de fauna y flora; las concentraciones de Cu y Zn, se encuentran por debajo de los limites establecidos por la EEA y la EPA. La correlacion significativa existente entre las concentraciones de los metales Fe, Mn, Zn, Co con los nutrientes nitrato y fosfato, indica posible acumulacion de ellos en el sedimento e incluso bioacumulacion en la fauna asociada a esta zona. La presencia y concentraciones de los metales son producto, principalmente, de la intervención humana en las labores de mineria y en el ciclo biogeoquimico de los metales.

  7. Validación del modelo expo-lineal precipitación-escurrimiento en un simulador de lluvia

    Directory of Open Access Journals (Sweden)

    Fernando Paz

    2017-10-01

    Full Text Available La necesidad de desarrollar métodos simplificados, operativos y coherentes para modelar la relación precipitación-escurrimiento a escala de eventos, permanece como uno de los grandes retos en el campo de la hidrología. Si bien existen propuestas simples de modelación como el método del Número de Curva o NC, sus bases teóricas no tienen fundamentos hidrológicos. La ventaja del método del NC es que solo requiere de un parámetro, lo cual lo hace muy atractivo en las aplicaciones. En este trabajo se analizan las bases del método del NC. Los resultados muestran que estos intentos simplificados de modelación están limitados. Por otro lado, el modelo expo-lineal de Paz (2013 es flexible en términos empíricos. Las bases teóricas de este modelo son discutidas en términos de la hidrología de área variable, en un formato suficientemente general para hacer solido su uso. El modelo se aplicó a un experimento en un simulador de lluvias con lotes de escurrimiento con diferentes tipos de suelo y coberturas aéreas de pastos. Los resultados mostraron un buen ajuste experimental a los datos, particularmente en términos de parametrizar el modelo expo-lineal en forma similar al método del NC. De estos desarrollos, se presenta un esquema de estimación de los parámetros del modelo expo-lineal que se puede usar en forma equivalente, por su simplicidad al tener un solo parámetro libre, al método del NC.

  8. Development and implementation of a methodology to simultaneously determine the thermal properties of rocks; Desarrollo e implantacion de una metodologia experimental para determinar simultaneamente las propiedades termicas de las rocas

    Energy Technology Data Exchange (ETDEWEB)

    Contreras Lopez, Enrique; Garcia Gutierrez, Alfonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    In the frame of the experimental infrastructure development of the Reservoirs Laboratory of the Geothermal Department of the Instituto de Investigaciones Electricas (IIE), a methodology that allows the simultaneous determination of the thermal conductivity, thermal diffusivity and specific heat in rock samples and other solid materials of low and medium conductivity, was implemented. The methodology is based in the theoretical solution of temperature distribution around an ideal linear heat source immersed in an infinite medium. The three properties are derived from one relatively simple experiment, that essentially consists in recording the temporary temperature variation in a given point of the specimen during a short heating period. This methodology has special application in the geothermal area, as well as in other areas related to the development and exploitation of underground energy and mineral resources. [Espanol] En el marco de las actividades de desarrollo de infraestructura experimental del Laboratorio de Yacimientos del Departamento de Geotermia del Instituto de Investigaciones Electricas (IIE), se implemento una metodologia que permite determinar simultaneamente la conductividad termica, la difusividad termica y el calor especifico en muestras de rocas y otros materiales solidos de conductividad baja e intermedia. La metodologia se basa en la solucion teorica de la distribucion de temperatura alrededor de una fuente lineal ideal de calor inmersa en un medio infinito. Las tres propiedades se derivan de un solo experimento relativamente simple, que consiste esencialmente en registrar la variacion temporal de la temperatura en un punto dado del especimen durante un corto periodo de calentamiento. Esta metodologia tiene especial aplicacion en el ambito de la geotermia, asi como en otras areas relacionadas con el desarrollo y aprovechamiento de los recursos energeticos y minerales del subsuelo.

  9. Control y presión al comer en madres de preescolares costarricenses, y su relación con la clase social, la escolaridad, las prácticas de alimentación temprana y el índice de masa corporal de sus hijos e hijas

    Directory of Open Access Journals (Sweden)

    Alejandro Chacón-Villalobos

    2011-01-01

    Full Text Available El objetivo planteado en este trabajo fue el de caracterizar la presion y el control al comer que ejercen madres de preescolares costarricenses de clase alta y baja, evaluando relaciones con el IMC de sus hijos, el tipo de lactancia, la ablactacion, la escolaridad de la madre y su dedicacion al hogar. Para ello se solicito a 102 madres de clase alta y 121 de clase baja completar una encuesta validada (alpha de Cronbach de 0,7 basada en escalas de Likert, para cuantificar, ademas de la informacion general requerida, los niveles de control y presion. Adicionalmente, se determino el IMC segun genero de sus hijos preescolares (102 ninos de clase alta y 103 de clase baja. Para el estudio de los datos se utilizaron pruebas de t-Student y analisis de varianza, asi como correlaciones y evaluaciones de chi cuadrado. Se establecio una tendencia al sobrepeso en ambos sexos en la clase alta, la cual contrasta con las ninas pobres quienes tienden al bajo peso. Se evidencio una mayor frecuencia de trabajo fuera del hogar en la clase baja (p=0,008, siendo la introduccion de alimentos solidos mas temprana (p=0,04. La leche materna fue la opcion mas empleada en ambas clases sociales para el neonato. Ambas clases mostraron "control" y "presión" altas, especialmente entre las madres de clase social baja que trabajan fuera del hogar (p=0,0001. Ambos parametros correlacionan de manera positiva moderada (r=0,44; alpha=0,05. La correlación es mas fuerte entre la clase alta (r=0,54, sobre todo en las niñas (r=0,6.

  10. GIS based Hydrogeological Vulnerability Mapping of Groundwater Resources in Jerash Area-Jordan

    Energy Technology Data Exchange (ETDEWEB)

    Hammouri, N [Department of Earth and Environmental Sciences, Faculty of Natural Resources and Environment, Hashemite University, Zarqa (Jordan); El-Naqa, A [Department of Water Management and Environment, Faculty of Natural Resources and Environment, Hashemite University, Zarqa (Jordan)

    2008-04-15

    This paper presents groundwater vulnerability mapping for Jerash area, north Jordan generated using EPIK and DRASTIC models. These models have been implemented using GIS to delineate groundwater protection zones and to suggest a protection plan to improve groundwater quality of the major springs and wells. Most of the groundwater resources in the study area are polluted and bacteria and nitrate levels are high. Different sources of groundwater pollution have been identified. Domestic wastewater is considered as a major source of pollution. Urban runoff, fertilizers from agricultural return flows and solid waste disposal appear to be secondary sources. The most relevant vulnerability class of EPIK map is very high which accounts for about 41 % of the total area. While in the DRASTIC vulnerability map, areas with high vulnerability were only about 23 % of the total area. There is a good correlation between vulnerability maps obtained from both models with microbiological and chemical pollution evidences. There is also a good agreement between the areas classified as highly vulnerable and those that have high levels of pollution. [Spanish] El estudio de vulnerabilidad de aguas subterraneas en la region de Yerash, Jordania fue obtenido mediante las metodologias de EPIK y DRASTIC. Se uso GIS para mapear las zonas protegidas y para sugerir un plan de proteccion para mejorar la calidad del agua subterranea en los principales manantiales y pozos. Los niveles de contaminacion bacteriana y de nitratos son elevados. El efluente domestico es la fuente mas importante de contaminacion; vienen en segundo lugar la precipitacion en zonas urbanas, los fertilizantes agricolas y los desechos solidos. En el mapa de EPIK, la vulnerabilidad extrema abarca hasta 41% del area total; en cambio, en el mapa de DRASTIC las areas de alta vulnerabilidad ocupan solo un 23% del area. La correlacion de los datos de contaminacion microbiana y quimica con ambos mapas der vulnerabilidad es buena

  11. Legitimidad y conveniencia del control constitucional de la economía

    Directory of Open Access Journals (Sweden)

    Rodrigo Uprimny

    2001-12-01

    Full Text Available En uno de sus textos, Amartya Sen señala que «la economía moderna se empobreció en forma sustancial debido a la distancia que se ha abierto entre la ética y la economía», ya que, como consecuencia de ese divorcio, la ciencia económica ha tenido una visión estrecha de las motivaciones del comportamiento humano y del significado del desarrollo social. Pero a su vez, señala Sen, este distanciamiento también ha perjudicado a la ética, que ha perdido la posibilidad de usar el fino instrumental analítico de la economía, para enriquecer sus visiones, y en especial para poder tomar en cuenta en sus análisis normativoslas complejas interdependencias que existen entre los comportamientos de los distintos agentes sociales.Esta reflexión de Sen puede ser proyectada a la relación, también bastante problemática, que se ha dado entre la economía y el derecho. La separación académica que durante mucho tiempo ha existido entre esas disciplinas ha tenido efectos empobrecedores para ambas. La economía ha solido desconocer la importancia que tienen la dimensión normativa y los arreglos institucionales en el comportamiento de los agentes económicos y en el significado del propio desarrollo, mientras que el olvido de los condicionamientos económicos puede llevar al análisis jurídico a moverse en abstracciones desvinculadas de la dinámica objetiva de los procesos sociales.

  12. Studio del comportamento di Acanthamoeba. polyphaga in presenza di Legionella pneumophila e di altri batteri ad habitat acquatico

    Directory of Open Access Journals (Sweden)

    M. Bondi

    2003-05-01

    Full Text Available Le amebe a vita libera sono state oggetto di diversi studi negli ultimi anni, non solo per le loro potenzialità patogene nei confronti dell’uomo, ma anche per l’importante ruolo che svolgono in natura, dove agiscono come predatori in grado di controllare le popolazioni batteriche. Alcuni degli organismi fagocitati però possono evitare la lisi fagosomiale e mantenere la loro condizione vitale a livello intracellulare, divenendo endosimbionti. Le amebe fungono così da riserva per questi batteri, proteggendoli da difficili condizioni extracellulari e provvedendo ad un ambiente consono alla loro replicazione. Tale tipo di interazione è particolarmente studiata in Legionella pneumophila, dal momento che l’ampia diffusione di questo germe, nonché la sua virulenza, pare siano fortemente influenzate dalla capacità di parassitare protozoi appartenenti ai generi Acanthamoeba, Naegleria e Balamuthia. Al fine di ottenere maggiori informazioni sui fattori favorenti o inibenti lo sviluppo di questi protozoi, è stato studiato il comportamento di un ceppo di Acanthamoeba polyphaga coltivato, in solido e in liquido, in associazione con L. pneumophila ed altri batteri ad habitat acquatico (Pseudomonas, Aeromonas, Achromobacter, Burkholderia. Su tappeti di cellule batteriche allestiti in Non Nutrient Agar (NNA, A.polyphaga si è mostrata in grado di moltiplicarsi utilizzando come nutrimento tutti i ceppi testati, nonostante alcuni, come Burkholderia cepacia SSV6 e Achromobacter xylox SS28, risultino più idonei al suo sviluppo. In piastre a pozzetti addizionate di acqua condottata autoclavata, il protozoo ha mostrato una buona capacità di sopravvivenza, non risultando inoltre influenzato dalla presenza di legionella o dei batteri acquatici testati. Dal momento che, fra i batteri descritti come capaci di vita intra-amebica, sono inclusi patogeni quali Chlamydia, Legionella, Listeria e Rickettsiae, risulta necessario riconsiderare la rilevanza clinica

  13. Cell death induced by tamoxifen in human blood lymphocytes cultivated in vitro = Morte celular induzida pelo tamoxifeno em linfócitos humanos cultivados in vitro

    Directory of Open Access Journals (Sweden)

    Selma Candelária Genari

    2010-10-01

    Full Text Available Many chemotherapeutic agents with a potential against solid tumors or leukemia can cause lymphopenia. Tamoxifen (TAM is a synthetic non-steroidal anti-estrogen drug employed in female breast cancer treatment. The present study investigated the capacity of TAM to induce cell death in human lymphocytes cultivated in vitro. Lymphocytes were obtained from young (25-30 years; n = 3 and elderly women (58-77 years; n = 3 and cultivated for 24 or 48h, with or without TAM (20 ƒÊM. After the culture, cell viability, immunocytochemical response and ultrastructure were evaluated. TAM affected lymphocytes in a time- dependent manner, and cells obtained from elderly women were the most sensitive to TAM. Immunocytochemicalanalysis evidenced higher frequency of apoptosis in treated cells, and the ultrastructural study revealed autophagic vacuoles, differing from the controls. In summary, the treated lymphocytes were affected by TAM, leading to cell death by apoptosis and autophagy.Muitos agentes quimioterapicos com potencial contra tumores solidos ou leucemias podem causar linfopenia. O Tamoxifeno (TAM e um agente antiestrogeno nao-esteroidal empregado no tratamento de cancer de mama feminino. O presente trabalho investigou a capacidade do TAM em induzir morte celular em linfocitos humanos cultivados in vitro. Oslinfocitos foram obtidos de mulheres jovens (25-30 anos; n = 3 e idosas (58-77 anos; n = 3 e cultivados por 24 ou 48h, com ou sem TAM (20 ƒÊM. Apos a cultura, foram analisadas a viabilidade celular, a resposta imunocitoquimica e a ultraestrutura. Os resultados indicam que o Tamoxifeno induziu morte celular em linfocitos de ambos os grupos, entretanto, as celulas das mulheres idosas apresentaram-se mais sensiveis ao tratamento. A analise imunocitoquimica mostrou maior frequencia de apoptose nas celulas tratadas e o estudo ultraestrutural revelou vacuolos autofagicos nos linfocitos expostos ao Tamoxifeno. Em conclusao, nosso estudo revelou que o TAM

  14. The electric energy in Mexico and the sustainable development; La energia electrica en Mexico y el desarrollo sustentable

    Energy Technology Data Exchange (ETDEWEB)

    Campos Aragon, Leticia [Instituto de Investigaciones Economicas, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

    1997-12-31

    This document explains the importance of the sustainable development in the electric energy, that is, that the technological advances in the electric sector do no hamper the future of the generations to come and generate potential problems such as: environmental pollution, unnecessary expenses in the realization of new technologies already executed. Mention is made of the relationship between nature and society, the ecological crisis, and the electric energy, seven points are given on how to control and treat waste waters, three points are given to handle and dispose of solid wastes, finally four points are given on the noise contamination control. It is concluded that the problem of reducing the environmental impact of the generation of electricity does not depend on the applied technology, since there are technological options for its solution, but on other more complex factors that deal with the generation of wealth, its distribution and the population growing [Espanol] En el presente documento se explica la importancia del desarrollo sustentable en la energia electrica, es decir que los avances tecnologicos en el sector energetico no entorpezcan el futuro de las generaciones venideras y generen posibles problemas como: contaminacion del medio ambiente, gastos innecesarios en la realizacion de las nuevas tecnologias realizadas. Se menciona la relacion entre la naturaleza y la sociedad, la crisis ecologica y la energia electrica, se dan siete puntos de como controlar y tratar aguas residuales, se proporcionan tres puntos para manejar y disponer de residuos solidos, por ultimo se dan cuatro puntos sobre el control de la contaminacion por ruido. Se concluye en que el problema de reducir el impacto ambiental por la generacion de electricidad no depende de la tecnologia empleada pues existen alternativas tecnologicas para su solucion, sino en otros aun mas complejos que tienen que ver con la generacion de la riqueza, su distribucion y el crecimiento de la poblacion

  15. Parameter sensitivity of high-order equivalent circuit models of turbine generator; Sensibilidad parametrica de modelos de circuitos equivalentes de orden superior de turbogeneradores

    Energy Technology Data Exchange (ETDEWEB)

    Lopez Garcia, I.; Escalera Perez, R. [Universidad Autonoma Metropolitana - Azcapotzalco (Mexico)]. E-mail: irvinlopez@yahoo.com; r.escalera@ieee.org; Niewierowicz Swiecicka, T. [Instituto Politecnico Nacional, U.P. Adolfo Lopez Mateos (Mexico)]. E-mail: tniewi@ipn.mx; Campero Littlewood, E.[Universidad Autonoma Metropolitana - Azcapotzalco (Mexico)]. E-mail: ecl@correo.azc.uam.mx

    2010-01-15

    generadores sincronos de rotor solido que no han sido previamente estudiados. La metodologia de sensibilidad que se presenta en este trabajo tambien se puede aplicar a otros sistemas fisicos.

  16. Energy diagnoses to the small company; Diagnosticos energeticos a la pequena empresa

    Energy Technology Data Exchange (ETDEWEB)

    Ambriz Garcia, Juan Jose; Ortega Navarro, Hermilio Oscar [Universidad Autonoma Metropolitana, Mexico D.F. (Mexico)

    2005-07-01

    energeticos en Mexico es muy factible pues con muy bajos costos se identifican y evaluan oportunidades de ahorro de energia para este segmento de empresas que tradicionalmente no ha sido atendido por los programas oficiales y que les permite dar inicio a un programa solido de mejora energetica.

  17. Superficial methane emissions from a landfill in Merida, Yucatan, Mexico; Emisiones superficiales de metano en un relleno sanitario en Merida, Yucatan, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Sauri-Riancho, Maria Rosa [Universidad Autonoma de Yucatan, Yucatan (Mexico)]. E-mail: sriancho@uady.mx; Stentiford, Edward I. [University of Leeds (UK)]. E-mail: e.i.stentiford@leeds.ac.uk; Gamboa-Marrufo, Mauricio; Reza-Bacelis, Gabriela; Cahuich-Poot, Nayla; Mendez-Novelo, Roger [Universidad Autonoma de Yucatan, Yucatan (Mexico)]. E-mails: gmarrufo@uady.mx; gabriela.reza@proactiva.com.mx; nayre63@hotmail.com; mnovelo@uady.mx

    2013-07-15

    On worldwide scale, one of the most important anthropogenic methane sources is landfill disposal for solid wastes. The main goal of this work was to quantify methane emissions at one landfill built in Merida, Mexico. This site had venting wells by which a passive control for biogas movement was exerted. At the venting wells, methane concentrations were measured monthly during a 6 months period. Methane surface emission rate was estimated with the close chamber technique. Obtained results indicated that there are both spatial and seasonal variations in biogas composition. The average methane value during the monitoring period was 21.9% (12.7 to 32.5 V/V) and the surface flow rate was in the range of 0 to 6,004 g CH{sub 4} m-2 d-1, with an average value of 1,480 g CH{sub 4} m-2 d-1, which is a high value in respect to these reported in publications. [Spanish] Entre las fuentes antropogenicas mas importantes de metano a escala mundial se encuentra la disposicion final de los residuos solidos. El objetivo de este trabajo fue cuantificar las emisiones de metano provenientes de un relleno sanitario en Merida, Mexico, en el que el movimiento del biogas se controlaba pasivamente utilizando pozos de venteo. Las concentraciones de metano se midieron mensualmente en los pozos de venteo del sitio a lo largo de un periodo de 6 meses. La tasa de emision superficial de metano se determino utilizando la tecnica de camara cerrada. Los resultados indicaron que existen variaciones considerables tanto espaciales como estacionales de la composicion del biogas proveniente de los pozos de venteo con un promedio de concentracion de metano en el sitio, durante todo el periodo de monitoreo, de 21.9% (12.7 a 32.5 V/V). Los flujos superficiales de gas medidos en diversos puntos a lo largo de la superficie del relleno sanitario tuvieron un promedio de 1,480 g CH{sub 4} m-2 d-1, lo que se considero un valor muy alto cuando se comparo con la informacion hallada en la literatura. El intervalo

  18. Exploitation of biogas in municipal in slaughterhouses: Technical-economical evaluation; Aprovechamiento de biogas en rastros y mataderos municipales: Evaluacion tecnica-economica

    Energy Technology Data Exchange (ETDEWEB)

    Martinez Hernandez, Donaji A.; Castaneda Sanchez, Arlem M.; Garcia Galeana, Erika [Universidad Nacional Autonoma de Mexico (UNAM), Facultad de Ingenieria (Mexico)

    2009-07-01

    Nowadays the treatment of the solid and liquid remainders in the municipal slaughter houses is small because of the idea that the treatment is expensive; nevertheless, it is important to take advantage of them, since this can reduce to the environmental impacts they cause, as well as the discharge of greenhouse effect gas. The use of bio digesters for the treatment of these remainders has become an efficient process to avoid the exit of methane gas to the atmosphere, taking advantage of the biogas and other residues to produce electricity. The elaboration of a technical-economical evaluation of a pilot plant shows the costs of investment, maintenance, as well as the income that can be obtained by the total usage of these residues and the savings in the electrical power consumption. The analysis of this study demonstrates that the use of biogas through bio-digesters for the generation of electrical energy is a profitable option for the treatment of the residues, because the income by the sale of compost, blood flour, as well as the diminution of the electrical tariff, justifies the initial investment. These projects will be more attractive, if they use financing and are registered as MDL projects. [Spanish] Actualmente el tratamiento de los desechos solidos y liquidos en los rastros y mataderos municipales es poco pues se tiene la idea de que el tratamiento es costoso; sin embargo, es importante que se aprovechen ya que esto puede reducir los impactos ambientales que provocan, asi como la emision de gases de efecto invernadero. El uso de biodigestores para el tratamiento de estos desechos, se ha convertido en un proceso eficiente para evitar la salida de gas metano a la atmosfera, aprovechando el biogas y otros residuos para producir electricidad. La elaboracion de una evaluacion tecnica-economica de una planta piloto, muestra los costos de inversion, mantenimiento, asi como los ingresos que se pueden obtener por el aprovechamiento total de estos residuos y el

  19. Use of rum and sugar cane bagasse in the removal of hydrocarbons in contaminated soil; Uso de cachaza y bagazo de cana de azucar en la remocion de hidrocarburos en suelo contaminado

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-02-15

    The objective of this work was to determine the removal efficiency of polycyclic aromatic hydrocarbons (PAH) and total petroleum hydrocarbons (TPH) from soil contaminated with hydrocarbons using two different types of agricultural residues, filter cake mud and the sugarcane bagasse pith, as amendment and bulking agents. To test these approaches, a microcosms test was applied to soil contaminated with 14 300 mg kg-1 of TPH and 23.14 mg kg-1 of PAH. The soil treatments consisted of the following ratios of soil to residue (%/%): 100:0, 98:2, 98:4 and 98:6, and macronutrient addition was based on a carbon/nitrogen/phosphorus ratio (C:N:P, %/ % / %) of 100:10:1. Statistical analysis indicated that there were significant differences between the filter cake mud and the sugarcane bagasse pith treatments, in which the TPH removal efficiency was 60.1% using sugar cane bagasse pith and 51.4% with filter cake mud. A filter cake mud ratio of 96:4 produced the highest observed removal efficiency of PAH (43%), and a sugarcane bagasse pith ratio of 98:2 resulted in a PAH removal efficiency of 41%. Filter cake mud treatment could be an alternative for use in the bioremediation process of soils polluted with hydrocarbons. [Spanish] El objetivo del presente trabajo fue determinar la eficiencia de remocion de hidrocarburos aromaticos policiclicos (HAP) y de hidrocarburos totales del petroleo (HTP) de un suelo contaminado con petroleo crudo, utilizando dos tipos de residuos agroindustriales, la cachaza y el bagazo de cana de azucar como enmiendas y texturizante. Para ello, se realizaron pruebas en microcosmos de cultivos solidos para la biorremediacion de un suelo contaminado con 14300 mg kg-1 de HTP y 23.14 mg kg-1 de HAP. Las relaciones suelo: residuo utilizadas en las pruebas fueron las siguientes (%): 100:0, 98:2, 96:4 y 94:6, y la adicion de macronutrimentos con base en la relacion carbono/nitrogeno/fosforo (%%%) de 100:10:1. El analisis estadistico indico que hay diferencias

  20. Renewable energy to produce electricity; Nuevas fuentes de energia para producir electricidad

    Energy Technology Data Exchange (ETDEWEB)

    Cadenas Tovar, Roberto; Lopez Rios, Serafin [Gerencia de Proyectos Geotermoelectricos de la Comision Federal de Electricidad, Morelia (Mexico)

    1996-05-01

    disponible, que puede representar una importante aportacion al suministro de electricidad. La biomasa es otro importante recurso renovable, en particular el aprovechamiento de los residuos solidos urbanos, los estiercoles del ganado y los residuos madereros. Finalmente otra tecnologia alterna esta representada por las celdas de combustible, aunque no es propiamente renovable, pero considerando su modularidad y bajo impacto ambiental puede alcanzar una buena penetracion comercial en la proxima decada.

  1. Physicochemical and microbiological study of “shmen”, a traditional butter made from camel milk in the Sahara (Algeria: isolation and identification of lactic acid bacteria and yeasts

    Directory of Open Access Journals (Sweden)

    Mourad, Kacem

    2006-06-01

    Full Text Available Microorganisms (aerobic bacteria, coliforms, lactic acid bacteria, psychrotrophs, lipolytic bacteria and yeasts were isolated from 20 samples of shmen, a traditional clarified butter made from sour camel milk in the Algerian Sahara. The values of pH, titratable acidity, NaCl, total solid, moisture, and fat content ranged from : 3.11-4.97, 0.19-0.36%, 1.04-2.15%, 64.03-65.11%, 34.40-34.99%, and 49.90-56% respectively. A total of 181 isolates of lactic acid bacteria were identified as Lactobacillus plantarum (40 strains, Lactobacillus delbrueckii ssp. bulgaricus (35 strains, Lactococcus lactis ssp. lactis biovar diacetylacti (22 strains, Lactococcus lactis ssp. cremoris (18 strains, Lactobacillus paracasei ssp. paracasei (10 strains, Leuconostoc pseudomesenteroides (9 strains and Leuconostoc gelidum (12 strains Enterococcus faecium (35 strains. Yeasts were isolated from all samples (55 isolates. Of these, 40 were identified as Saccharomyces cerevisiae and 15 isolates were identified as Saccharomyces sp.Se aislaron los microorganismos (bacterias aeróbicas, coliformes, bacterias acido lácticas, bacterias lipolíticas y levaduras de 20 muestras de “shmen”, una matequilla tradicional del Sahara argelino hecha a partir de leche de camella. Los valores de pH, acidez, libre, Nacl, solidos totales, humedad y grasa oscilaron entre 3,11-4,97, 0,19-0,36%, 1.04-2,15%, 64,03-65,11%, 34,40-34,99% y 49,90-56,00%, respectivamente. Entre los 181 cultivos puros de bacterias lácticas se identificaron Lactobacillus plantarum (40 cepas, Lactobacillus delbrueckii ssp. bulgaricus (35 cepas, Lactococcus lactis ssp. lactis biovar diacetylacti (22 cepas, Lactococcus lactis ssp. cremoris (18 cepas, Lactobacillus paracasei ssp. paracasei (10 cepas, Leuconostoc pseudomesenteroides (9 cepas and Leuconostoc gelidum (12cepas Enterococcus faecium (35 cepas. Asimismo, se detectaron levaduras en todas las muestras (55 cultivos puros. De estos, 40 se identificaron como

  2. Utilization of industrial solid wastes able to generate calcium trisulphoaluminate and silicate hydrates in stabilization processes and for the manufacture of building materials; Utilizzazione di residui solidi industriali in grado di generare trisolfoalluminato e silicato di calcio idrati nei processi di stabilizzazione e nella produzione di materiali da costruzione

    Energy Technology Data Exchange (ETDEWEB)

    Santoro, L. [Naples, Univ. `Federico II` (Italy). Dipt. di Chimica; Cioffi, R. [Naples, Univ. `Federico II` (Italy). Ditp. di Ingegneria dei Materiali e della Produzione

    1998-01-01

    In this work the stabilization of hazardous solid wastes containing heavy metals has been studied by means of novel matrices able to generate calcium trisulphoaluminate and silicate hydrates. The process is based on the hydration of two different mixtures containing blast furnace slag, coal ashes, chemical gypsum and Portland cement. The stabilization capacity of the two mixtures has been checked with regard to both a residue from an incinerator of municipal solid wastes and model systems obtained by adding 5 and 10% of soluble nitrates of Cd, Cr, Cu, Ni, Pb and Zn. The stabilized products have been validated from the point of view of mechanical properties by determining the unconfined compressive strength, and from the environmental point of view by means of static and dynamic leaching tests. Both matrices have proved to have great potentiality for the stabilization of hazardous solid wastes, the one based on blast furnace slag being better. Finally, evidence is given that different leaching tests are necessary to fully understand the immobilization mechanism responsible for stabilization. [Italiano] In questo lavoro e` stata studiata la atbilizzazione di residui tossici e nocivi contenenti metalli pesanti per mezzo di matrici leganti innovative capaci di generare trisolfoalluminato e silicato di calcio idrati. Il processo e` basato sull`idratazione di due diverse miscele contenenti scoria d`alto forno, ceneri di carbone, gessi chimici e cemento Portland. Le capacita` stabilizzanti delle due miscele sono state verificate sia nei confronti di un residuo solido generato a seguito dell`incenerimento di RSU, che nei confronti di sistemi modello ottenuti aggiungendo singolarmente il 5 e 10% dei nitrati solubili di Cd, Cr, Cu, Ni, Pb e Zn. I prodotti solidi stabilizzati sono stati validati dal punto di vista delle prestazioni meccaniche mediante prove di resistenza a compressione, e dal punto di vista ambientale mediante test di rilascio sia statici che dinamici

  3. Biofuels derived from corn; Biocombustibles derivados del maiz

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2012-06-22

    The biofuels can be obtained from the biomass, are liquid, solid or gaseous from matter of vegetal or animal origin, by biological, chemical or physical processes and combinations of them. The biofuels appear as an alternating fuels in the transport sector, mainly due to the positive impact of greenhouse gases effect (GHG) and to the increase of oil prices. In theory the use of bioethanol and the biofuels, they not have CO{sub 2} emissions since this it is absorbed in the same amount by the cultures that generate them, as the corn or sugar cane. Our country has a deficit in the food production, mainly in corn, grain that can offer the opportunity not only to continue being the base of the national feeding, but also the raw material to produce bioethanol. The national yields are so diverse that they resemble to those of EUA or Africa, without a doubt this is indicative that is due to devise the way of increase the yields of this appraised culture, reach in average the six tons by hectare, improving the culture practice and access to fertilizers, water, transport, transparent markets and right prices. [Spanish] Los biocombustibles pueden ser obtenidos de la biomasa, son liquidos, solidos o gaseosos provenientes de material vegetal u origen animal, pueden obtenerse mediante procesos biologicos, quimicos o fisicos, y combinaciones de ellos. Se presentan como combustibles alternos en el sector transporte, debido principalmente al impacto positivo de la reduccion de gases de efecto invernadero (GEI) y al aumento de los precios del petroleo. En teoria el uso del bioetanol y los biocombustibles no produce emisiones de CO{sub 2} porque este se absorbe en la misma cantidad a traves de los cultivos que los generan, como el maiz y la cana de azucar. Mexico tiene deficit en la produccion de alimentos, principalmente maiz, grano que puede ofrecer la oportunidad no solo de continuar siendo la base de la alimentacion nacional, sino tambien la materia prima para producir bioetanol

  4. Overview of PV Wind hybrid system activities in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Bopp, G.; Gabler, H.; Kiefer, K.; Preiser, K.; Wiemken, E. [Fraunhofer Institute for Solar Energy Systems ISE, Freiburg (Germany)

    1997-12-31

    , tipicamente de 5kW, para cargas tipicamente de 20kWh por dia. Mas de cien anos de experiencia acumulada hasta ahora son un solido fundamento del cual se puede hacer un balance intermedio de los problemas resueltos y las cuestiones tecnicas aun por desarrollar. Se ve que hay lugar para un desarrollo tecnico posterior en el dominio de confiabilidad del sistema y de la reduccion de los costos de operacion asi como tambien en la optimizacion de la utilizacion de la energia electrica producida por el generador fotovoltaico.

  5. Sobre García de la Huerta, teórico y traductor

    Directory of Open Access Journals (Sweden)

    Loreto BUSQUETS

    2009-11-01

    Full Text Available RESUMEN: El ensayo afronta dos facetas notoriamente controvertidas de García de la Huerta rescatándolas del menosprecio que han solido reservales los críticos. De un lado, se muestra la sensatez y la «normalidad» de muchas de las aseveraciones teóricas de Huerta, y del otro, su modus operandi como traductor a partir de un cotejo pormenorizado del texto de Xaira con el original voltairiano. En él, Huerta ha sabido ser fiel al espíritu del original a través de una traducción relativamente literal, en la que ha intervenido con ampliaciones y cambios estructurales que han dado al texto el sello inconfundible de una obra española y el carácter de una obra clásica y al tiempo romántica, como es el propio Zaïre: no sólo por el tema, sino sobre todo por el deseo y la capacidad de explicitar, con una dicción intensa, natural y arrebatada, aquellos sentimientos que el teatro romántico europeo aspira a expresar de forma inmediata emulando la música, y especialmente la ópera de la época, que vive a su lado inyectándole aspiraciones y logros.ABSTRACT: This essay deals with two notoriously controversial facets of García de la Huerta, rescuing them from the contempt critics have customarily reserved for them. On the one hand, the essay shows the common sense and «normality» of many of Huerta’s theoretical statements, and on the other, his modus operandi as translator, based on a detailed comparison of the text of Xaira with the original by Voltaire. In it Huerta succeeded in being faithful to the spirit of the original by means of a relatively literal translation, in which he intervened with elaborations and structural changes that have conferred upon the text the unmistakable seal of a Spanish work, as well as the character of a work both classical and romantic, as Zaïre itself is: not only for its theme, but above all for its desire and ability to make explicit, with an intense, natural and passionate diction, the feelings that

  6. Evaluation of avoided carbon dioxide emissions in cogeneration projects; Evaluacion de las emisiones evitadas de bioxido de carbono en proyectos de cogeneracion

    Energy Technology Data Exchange (ETDEWEB)

    Flores Zamudio, Jesus Antonio; Fernandez Montiel, Manuel Francisco; Alcaraz Calderon, Agustin Moises [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: jesus.flores@iie.org.mx; mffm@iie.org.mx; malcaraz@iie.org.mx

    2010-11-15

    In this paper, presents a methodology of how to calculate the emissions of CO{sub 2} (Carbon Dioxide) in cogeneration of plants for evaluate future cases with the type of fuel and fuel flow used in the plant. The methodology was in spreadsheets developed a series of stoichiometric balances. The methodology was done for three types of fossil fuels: solid, liquid and gas. The analysis is made only to the percentages of the items contained in the fuel flow automatically used and results in the combustion products in tons per hour. This method was compared with the results obtained in the software Thermoflow Inc. (Used in Gerencia de Procesos Termicos of Instituto de Investigaciones Electricas for evaluate various process systems that produce energy power) using different cogeneration systems, that is to say about the technology used emissions compared according to the amount of excess air for each type of technology and at one point before the gas cleaning systems. The results can be evaluated for emissions avoided through the fuel type used and developing a cogeneration plant compared to a conventional plant. [Spanish] En este articulo, se presenta una metodologia de como calcular las emisiones de CO{sub 2} (Bioxido de carbono) en plantas de cogeneracion, para evaluar casos a futuro por medio del tipo de combustible y flujo de combustible a utilizar en la planta. La metodologia se realizo en hojas de calculo, donde se desarrollaron una serie de balances estequiometricos. La metodologia se hizo para tres tipos de combustibles fosiles: solido, liquido y gas. El analisis se realiza con solo dar los porcentajes de los elementos que contiene el combustible y el flujo a utilizarse y automaticamente da como resultado los productos de la combustion en toneladas por hora. Esta metodologia se comparo con los resultados obtenidos en el software Thermoflow Inc. (Empleado en la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas para evaluar diversos

  7. Surface and bulk modifications of 1.5 mole % Sr/La{sub 2}O{sub 3} catalyst with different Co, Ni, and Cu amounts

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Cortes, Sergio; Fontal, Bernardo [Universidad de los Andes, Merida (Venezuela); Moronta, Delfin [Universidad Central de Venezuela, Caracas (Venezuela)

    2001-08-01

    The effects of Co, Ni and Cu oxide content on the surface and bulk of the 1.5 mole % Sr/La{sub 2}O{sub 3} catalysts were studied. Series of M/Sr-La catalysts (MCo, Ni, Cu) were prepared by successive immersion impregnation. The solids were characterized by X-ray diffraction (XRD), infrared spectroscopy (FTIR), temperature-programmed reduction (TPR), electron paramagnetic resonance (EPR), specific surface area measurements (BET) and thermogravimetric analysis (TGA). The Sr/La{sub 2}O{sub 3} modified with different Co, Ni, and Cu loading shows a strong metal oxide interaction with La{sub 2}O{sub 3}. This probably begin over anionic vacancies or structure defects favoring LaSrMO{sub x} solid solution formation with island-like structures according to a Volmer-Weber growth. It is proposed that the growth mode of La-Co, La-Ni and La-Cu stoichiometric phases occur from solid solutions. The formation of only a La-M single phase, probably non-stoichiometric, increases the material porosity while different phases favor the agglomeration or sintering of the particles. [Spanish] En este trabajo se estudia el efecto de la cantidad de cobalto, niquel y cobre sobre las estructuras superficial y masica del sistema 1.5% molar Sr/La{sub 2}O{sub 3}. Los catalizadores M/Sr-La (M = Co, Ni, Cu) fueron preparados por el metodo de impregnacion con exceso de solucion. Los solidos se caracterizaron por difraccion de rayos-X, espectroscopia infrarroja con transformada de Fourier, reduccion a temperatura programada, resonancia paramagnetica del electron, medidas del area superficial especifica por el metodo de BET y analisis termogravimetrico. El catalizador Sr/La{sub 2}O{sub 3} modificado con diferentes cantidades de Co, Ni y Cu muestra una interaccion fuerte con el oxido del metal de transicion, probablemente sobre las vacancias anionicas o defectos estructurales que favorecen la formacion de la solucion solida LaSrMox en forma de isla, segun el mecanismo de crecimiento de fase de Volmer

  8. Soil decontamination at the Montevecchio-Levante mine site with experimental washing and leaching techniques

    Energy Technology Data Exchange (ETDEWEB)

    Dessi, R. [Progemisa SpA, Cagliari (Italy); Fadda, S.; Peretti, R.; Zucca, A. [CSGM, Centro Studi Germinerari e Mineralurgici del CNR, Cagliari (Italy); Serci, A. [Digita, Dipt. di Geoingegneria e Tecnologie Ambientali, Cagliari (Italy)

    2000-12-01

    cloridrico e cloruro di calcio. E' stata verificata l'influenza sia della concentrazione dei reagenti che del rapporto solido-liquido, rilevando, nei casi ritenuti piu' significativi, le cinetiche di attacco. Le prove effettuate hanno evidenziato che le salamoie costituite da acido cloridrico e cloruro di calcio sono risultate le piu' efficaci nei confronti dei metalli contaminati. Inoltre, sulla base dei risultati conseguiti, la possibilita' di decontaminazione mediante lisciviazione in cumulo e' stata simulata in laboratorio con la tecnica in colonna.

  9. Simulation of seismograms in a 2-D viscoelastic Earth by pseudospectral methods

    Energy Technology Data Exchange (ETDEWEB)

    Carcione, Jose M [Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS), Trieste (Italy); Helle, Hans B [Norsk Hydro a.s., 0 and E Research Centre, Bergen (Norway); Seriani, Geza [Istituto Nazionale di Oceanografia e di Geofisica Sperimentale (OGS), Trieste (Italy); Plasencia Linares, Milton P [Facultad de Ciencias Astronomicas y Geofisicas, Universidad Nacional de La Plata, La Plata (Argentina)

    2005-04-15

    Using an improved global pseudospectral modeling algorithm we synthesize seismograms generated by oceanic and continental earthquakes. Attention is given to attenuation, to explicit modeling of boundary conditions at the ocean-bottom interface, simulation of the Rayleigh window and interface-wave propagation. The algorithm is based on Fourier and Chebyshev differential operators and a domain-decomposition technique - one grid for the fluid and another grid for the solid. Wave propagation in the oceanic and continent crusts and mantle is modeled by using a viscoelastic stress-strain relation based on memory variables. The main physical phenomena associated with an ocean-crust system are modeled, including Scholte waves, leaking Rayleigh waves, dispersive modes, and the Rayleigh-window phenomenon due to a minimum in the reflection coefficient of the ocean bottom, which has not been simulated with direct methods. In particular, we model Rayleigh modes (mainly the M11 mode), and coupled Rayleigh-Scholte waves, for which the dispersion relation is solved in simple cases. Also, we model the effects of random. [Spanish] El algoritmo de modulacion seudoespectral es mejorado y aplicado a la simulacion de sismogramas generados por sismos oceanicos y continentales, como atencion a la atenuacion y a la modelacion explicita de condiciones a la frontera en el fondo oceanico y a la simulacion de la ventana de Rayleigh y la propagacion en interfases. El algoritmo se basa en los operadores diferenciales de Fourier y de Chebyshev con una tecnica de decomposicion de dominios, una malla para el fluido y otra para el solido. Para la propagacion se usa una relacion de esfuerzo-deformacion basada en variables de memoria. Entre los fenomenos modelados se incluyen las ondas de Scholte, las ondas evanescentes de Rayleigh y los modos dispersivos, asi como la ventana de Rayleigh, un minimo del coeficiente de reflexion en el fondo oceanico que nunca ha sido simulado con metodos directos. Hemos

  10. Determinación de condiciones para encapsulación de proteasa mediante electroatomización

    Directory of Open Access Journals (Sweden)

    Yessica Lorena Díaz

    2016-06-01

    Full Text Available La encapsulación es un método mediante el cual, sustancias bioactivas son introducidas en una matriz para evitar su pérdida y asimismo, facilitar su incorporación en diferentes productos; no obstante, durante este proceso, es preciso tener en cuenta la técnica y las condiciones de proceso para conseguir la formación de capsulas. El objetivo fue determinar las condiciones adecuadas para encapsulación de proteasa mediante electroatomización. La evaluación del proceso se realizó en función de las variables independientes: voltaje, concentración de material de recubrimiento y el flujo de alimentación; además de las variables dependientes: características del espectro y morfología. A las partículas obtenidas se les midió las características morfológicas (microscopía y de espectro (Raman. Los resultados mostraron que, las condiciones que permitieron la encapsulación fueron las realizadas a un voltaje de 13kV, empleando un material de recubrimiento con un aporte de solidos solubles totales de 55% y un flujo de alimentación de 0,1mL/h; presentando formación de cápsulas esféricas con espectros (Raman en el intervalo de 200 a 700cm-1; observando el pico más alto correspondiente a la enzima a 515cm-1 y tamaños entre 0,035 y 1,185μm. A partir de los resultados, se infiere que la electroatomización puede ser considerada como una técnica viable para la encapsulación de enzima proteasa, siempre y cuando se establezcan las condiciones de proceso que son propias de cada solución, permitiendo de esta manera el desarrollo de productos (aditivos que posteriormente puedan llegar a ser incorporados a otros.

  11. Análisis de cocaína en diferentes muestras por cromatografía de gases con detector de ionización de llama (CG-FID

    Directory of Open Access Journals (Sweden)

    Ángela M. López C.

    2015-01-01

    Full Text Available En este estudio se realizó la validación de los métodos establecidos por la UNODC para la cuantificación y extracción de benzometilecgonina (cocaína presente en las hojas de Erythhroxylum coca, en té de coca y en clorhidrato de cocaína. El primer método de extracción, recomendado por la UNODC, es una extracción solido-líquido (ESL, sin embargo, los resultados obtenidos indican que esta no es lo suficientemente eficiente para lograr una señal de analito distinguible de la relación señal a ruido (S/N para las muestras de hojas de Erythhroxylum coca y té de coca. El segundo método propuesto es la extracción soxhlet, los resultados indican que esta resulta más eficiente para aislar y cuantificar el analito de interés por cromatografía de gases acoplada a un detector de ionización por llama (CG-FID. Después de someter las muestras al proceso de extracción soxhlet y cuantificación por CG-FID se encontró que la hoja de té posee 7,66×102 mg de cocaína/kg de muestra, las hojas de coca 17,15 mg de cocaína/kg de muestra y el clorhidrato de cocaína 7,15×105 mg de cocaína/kg de muestra. El método de análisis escogido se caracteriza por arrojar bajos límites de detección (0,169 mg/L y por poseer parámetros estadísticos y cromatográficos ideales.

  12. Thermo mechanical analysis and optimization in transient state of the first stage of blades in a gas turbine with internal cooling; Analisis y optimizacion termomecanica, en estado transitorio, de la primera etapa de alabes en una turbina de gas con enfriamiento interno

    Energy Technology Data Exchange (ETDEWEB)

    Campos Amezcua, Alfonso

    2007-04-15

    ecuaciones de equilibrio, las relaciones deformacion-desplazamiento, esfuerzo-deformacion y de termoelasticidad para este caso en particular. El metodo de elementos finitos permite obtener una solucion numerica de un problema estructural. Para cada tipo de analisis, se desarrollaron modelos computacionales en tres dimensiones, incluyendo todos los componentes del alabe real, para evitar simplificaciones geometricas. El modelo de CFD consta de 3389821 celdas mixtas-hexaedros y tetraedros-, de los cuales 79% corresponden al fluido y 21% al solido. El modelo de FEA tiene 195279 nodos y 161005 elementos hexaedricos. Se desarrollo una interfaz para tomar la distribucion tridimensional de temperatura resultante del analisis aerotermico (CFD), e imponerles como cargas termicas en el subsecuente analisis estructural (FEA). Esta interfaz permite integrar virtualmente los modelos computacionales, a pesar de que tienen mallas diferentes, y que el modelo de CFD registra los datos en el centro de las celdas, mientras que el modelo de FEA los registra en los nodos. Se obtuvieron los perfiles de presion, temperatura y velocidad para el fluido y, temperatura y esfuerzos para el solido. Los resultados obtenidos son comparados con datos experimentales reportados en la literatura obteniendose resultados aceptables. Con este trabajo se genera informacion para estudios complementarios como son analisis de fallas y estimacion de vida residual.

  13. Li-promoted sodium zirconate as a CO{sub 2} absorbent at high temperatures; Zirconato de sodio promovido con Li como absorbente de CO{sub 2} a alta temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Guzman Velderrain, V.; Barraza Jimenez, D.; Lardizabal Gutierrez, D.; Delgado Vigil, D.; Salinas Gutierrez, J.; Lopez Ortiz, A.; Collins-Martinez, V. [Centro de Investigacion en Materiales Avanzados S. C., Chihuahua, Chihuahua (Mexico)]. E-mail: virginia.collins@cimav.edu.mx

    2009-09-15

    structures of the type Na{sub 4}ZrO{sub 4}, which are responsible for the increase in the absorption capacity. [Spanish] En los procesos de produccion de hidrogeno a partir de combustibles fosiles, la captura de CO{sub 2} a alta temperatura ha alcanzado un papel esencial al convertir estos, en procesos energeticamente mas eficientes. Un ejemplo es el reformado de metano de vapor mejorado con absorcion (SER), donde la captura de CO{sub 2} a alta temperatura (600 grados centigrados) provee ahorros en energia ({approx_equal} 23%) sobre el proceso convencional de reformacion (SMR). Parte importante de este concepto es el absorbente solido de CO{sub 2}, el cual debe presentar una adecuada capacidad de absorcion y rapidas cineticas de absorcion/regeneracion. Recientemente, se han desarrollado absorbentes de CO{sub 2} sinteticos que consisten en mezclas de oxidos base-Li. Estudios previos realizados en nuestro laboratorio, reportan que el zirconato de sodio (Na{sub 2}ZrO{sub 3}) presenta propiedades de absorcion/regeneracion superiores a los oxidos base-Li. El presente trabajo tiene como objetivo aumentar la capacidad de absorcion del Na{sub 2}ZrO{sub 3} a alta temperatura sin afectar significativamente las cineticas tanto de absorcion como de regeneracion de este mediante su promocion con Li. El Na{sub 2}ZrO{sub 3} fue sintetizado por reaccion en estado solido e impregnado con LiNO{sub 3} a diferentes relaciones Li/Na: 0, 0.03, 0.05, 0.1 y 0.25 (NZ, NZL3, NZL5, NZL10, NZL25). La caracterizacion consistio en XRD y SEM. La evaluacion como absorbente se realizo mediante TGA a 600 grados centigrados en 80% CO{sub 2} (absorcion) y 800 grados centigrados en aire (regeneracion). Los XRD indican solo la estructura Na{sub 2}ZrO{sub 3} en todas las muestras, pero las promovidas presentan un desplazamiento en sus senales respecto a las del Na{sub 2}ZrO{sub 3}, el cual se atribuye a la sustitucion de atomos de Na por Li. Los resultados de TGA indican que la adicion del Li en la estructura del

  14. Sénèque, le stoïcisme et la monarchie absolue dans le De clementia Seneca, Stoicism and Absolute Monarchy in De clementia Seneca, stoicismo e monarchia assoluta nello De clementia

    Directory of Open Access Journals (Sweden)

    Gérard Salamon

    2011-07-01

    buongoverno convincendolo a praticare la clemenza, elevata al rango di virtù cardinale. Ma in un momento in cui a Roma lo stoicismo appare associato, nella figura di Catone, agli ideali repubblicani, l’opera partecipa anche di un dibattito interno alla Stoa. Seneca a volte afferma la sua vicinanza allo stoicismo ortodosso per giustificare la sua accettazione della monarchia assoluta e il primo piano da lui accordato alla clemenza, essenziale in questo tipo di regime. Sul piano istituzionale il trattato senecano appare solido; per quanto concerne la clemenza egli cerca di far evolvere la dottrina pur rimanendo all’interno delle categorie stoiche. La storia mostra che Seneca non ha convinto, ma resta il fatto che il De clementia è l’opera di un stoico autentico.

  15. Analysis of the generation of electric energy through the use of biogas obtained from sanitary fillings in Mexico; Analisis de la generacion de energia electrica a traves de biogas procedente de rellenos sanitarios en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Cerda Sauvage, Tania Kalinka [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

    2004-06-15

    tecnologia en nuestro pais. En la parte introductoria de este trabajo se plantean algunas causas que han favorecido el desarrollo de tecnologias como la aqui planteada. En la primera parte se expone que es el biogas y que condiciones son necesarias para su produccion lo cual explica la produccion de biogas en los rellenos sanitarios, ademas se describe la distribucion de los residuos solidos que dan origen a la situacion actual de los rellenos sanitarios y el proceso de produccion de biogas en estos. El trabajo continua con una descripcion del proceso de generacion de energia electrica a traves del biogas procedente de rellenos sanitarios indicandose las condiciones necesarias para que el relleno cumpla sus funciones basicas; siguiendo nuestro proceso hasta la obtencion del producto final, energia electrica. Para la descripcion del proceso y analizar algunos factores que intervienen me ha parecido conveniente incluir los principales aspectos de una planta ubicada en Monterrey, que ocupa esta tecnologia. Este proyecto muestra de una forma tangible las barreras a las que esta tecnologia se enfrenta, asi como sus principales ventajas y desventajas. Se exponen las limitantes de esta tecnologia en los aspectos tecnologicos, economicos, politicos y sociales, las barreras que pueden y deben vencerse asi como las razones que justifican el esfuerzo para vencerlas. Finalmente se presentan las conclusiones a que conduce asi como los comentarios y sugerencias con respecto al tema.

  16. Improvement of the performance of a new type of single chamber microbial fuel cell compared to a conventional cell; Mejora del desempeno de un nuevo tipo de celda de combustible microbiana de una camara comparado con una celda convencional

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez Larios, A.L.; Vazquez-Huerta, G.; Esparza-Garcia, F.; Solorza-Feria, O.; Poggi Varaldo, H.M. [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)]. E-mail: hectorpoggi2001@gmail.com; linevazquez@yahoo.com.mx

    2009-09-15

    , generados en la produccion biologica de hidrogeno a partir de residuos solidos municipales. La densidad de potencia maxima a 30 grados centigrados obtenida fue 38 mW/m{sup 2} y 5 mW/m{sup 2} para la CCM-A y CCM-B respectivamente. Los cambios en la arquitectura de la celda y el diseno de los electrodos dieron lugar a una densidad de potencia ocho veces mayor, asociado a la disminucion de la resistencia interna (Ri), de 1200 y 3900 {Omega} para CCM-A y CCM-B, respectivamente. El cambio de arquitectura (doble electrodo en el mismo volumen para CCM-A) permitio obtener potencias por unidad de volumen 13 veces superior, siendo 922 mW/m{sup 3} en la nueva celda CCM-A, contra 69 mW/m{sup 3} en CCM-B.

  17. GPU-Accelerated Optical Coherence Tomography Signal Processing and Visualization

    Science.gov (United States)

    Darbrazi, Seyed Hamid Hosseiny

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  18. Particulate matter and polycyclic aromatic hydrocarbons from forest fires: impacts on air quality and occupational risks assessment

    Science.gov (United States)

    Oliveira, Marta Madalena Marques de

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  19. Life-cycle optimization model for distributed generation in buildings

    Science.gov (United States)

    Safaei, Amir

    principal objetivo desta tese de doutoramento foi desenvolver um modelo para otimizar o desenho e operacao de sistemas de GD para o setor da construcao de edificios comerciais em Portugal, considerando os respetivos Impactes de Ciclo de Vida (IAVC) e Custos de Ciclo de Vida (CCV), de modo a satisfazer as necessidades energeticas do edificio. Tres tipos de tecnologias de cogeracao (Micro-Turbinas, Motores de combustao interna, e Celulas combustiveis de Oxido solido), e dois tipos de tecnologias de energia solar, solar termica e fotovoltaica, constituem os sistemas de GD que sao acoplados aos sistemas convencionais. Foi desenvolvido um modelo de CV, tendo em conta todos os impactes relacionados com a construcao e operacao dos sistemas de energia, bem como os processos a montante relacionados com a producao do GN. Em particular, o mix de GN consumido em Portugal em 2011 foi identificado (60% da Nigeria, 40% da Argelia) e os impactes relativos a cada uma das vias de abastecimento foram avaliados separadamente para quatro categorias de impacte ambiental: Consumo de Energia Primaria (CEP), Gases com Efeito de Estufa (GEE), acidificacao, e eutrofizacao. Devido a importancia das emissoes de GEE na formulacao de politicas, foi tambem realizada uma analise de incerteza as emissoes de GEE do GN fornecido a Portugal. Foi desenvolvido um modelo matematico, em linguagem de Programacao General Algebraic Modeling System (GAMS), que utiliza os resultados da ACV dos sistemas de energia e as suas implicacoes economicas para minimizar o CCV e IACV ao longo de um horizonte de planeamento definido pelo decisor. Foram derivadas fronteiras otimas de Pareto, representando as relacoes entre o tipo de IACV (CEP, GEE, acidificacao, eutrofizacao) e CCV decorrentes da satisfacao das necessidades energeticas do edificio. Para aumentar a robustez do modelo, dada a incerteza dos precos dos combustiveis (GN e eletricidade), foi desenvolvido um modelo de custos robusto para os sistemas de GD, que e menos

  20. Synthesis of geopolymer from spent FCC: Effect of SiO2/Al2O<3 and Na2O/SiO2 molar ratios

    Directory of Open Access Journals (Sweden)

    Trochez, J. J.

    2015-03-01

    Full Text Available This paper assesses the feasibility of using a spent fluid catalytic cracking catalyst (SFCC as precursor for the production of geopolymers. The mechanical and structural characterization of alkali-activated SFCC binders formulated with different overall (activator + solid precursor SiO2/Al2O3 and Na2O/SiO2 molar ratios are reported. Formation of an aluminosilicate ‘geopolymer’ gel is observed under all conditions of activation used, along with formation of zeolites. Increased SiO2/Al2O3 induces the formation of geopolymers with reduced mechanical strength, for all the Na2O/SiO2 ratios assessed, which is associated with excess silicate species supplied by the activator. This is least significant at increased alkalinity conditions (higher Na2O/SiO2 ratios, as larger extents of reaction of the spent catalyst are achieved. SiO2/Al2O3 and Na2O/SiO2 ratios of 2.4 and 0.25, respectively, promote the highest compressive strength (67 MPa. This study elucidates the great potential of using SFCC as precursor to produce sustainable ceramic-like materials via alkali-activation.Este artículo estudia la factibilidad de usar un catalizador gastado del proceso de craqueo (SFCC para la producción de geopolímeros. Se evalúan las características mecánicas y estructurales de los geopolímeros producidos con diferentes relaciones molares (activador + precursor solido de SiO2/Al2O3 y Na2O/SiO2. La formación de un gel geopolimérico de tipo aluminosilicato se observa a las diferentes condiciones evaluadas, así como la formación de zeolitas. Un incremento en la relación SiO2/Al2O3 genera geopolímeros de baja resistencia mecánica, a las diferentes relaciones molares Na2O/SiO2 evaluadas, como consecuencia del exceso de especies silicato provenientes del activador. Este efecto es menos significativo al incrementar las condiciones de alcalinidad (mayores relaciones Na2O/SiO2, ya que un mayor grado de reacción del catalizador gastado es alcanzado. Las

  1. Ecosustainable animal manure treatment in countries with intensive breeding; Trattamento ecocompatibile delle deiezioni zootecniche in territori ad alta intensita' produttiva

    Energy Technology Data Exchange (ETDEWEB)

    Pizzichini, M. [ENEA, Divisione Biotecnologie e Agricoltura, Centro Ricerche Casaccia, Rome (Italy); Bozzini, A. [Food Agricultural Organization, Rome (Italy); Montani, R. [INTEAM Srl., Verona (Italy)

    2001-07-01

    patologie infettive a carico degli animali, danni economici per le aziende di filiera (allevatori, macelli, mangifici, distributori, etc.) e per la collettivita' (interventi sanitari, isolamento dei focolai di infezione, rimborsi economici, smaltimento delle carcasse). Da un censimento dei capi alelvati, disaggregati per ASL, si valuta il carico organico prodotto e conseguentemente vengono indicate modalita' di gestione corretta degli allevamenti e tecnologie adeguate per lo smaltimento delle deiezioni nel rispetto della recente normativa. La separazione solido-liquido delle deiezioni, con tecniche tradizionali (vibrovagli, centrifughe) consente di definire due vie di trasformazione come il compostaggio per le frazioni solide e la depurazione con processi a membrana della frazione liquida. Lo studio mira a salvaguardare i contenuti strategici d'intervento nel settore come: il miglioramento delle condizioni igieniche di stabulazione, la difesa del benessere degli animali, la gestione corretta delle deiezioni applicando tecnologie innovative e flessibili. In questo modo si puo' sviluppare un processo che riduca gli inconvenienti ambientali e di salute pubblica delle deiezioni e produca un fertilizzante organico di qualita', importante e insostituibile per lo sviluppo agronomico.

  2. Single Point Incremental Forming and Multi-Stage Incremental Forming on Aluminium Alloy 1050

    Science.gov (United States)

    Suriyaprakan, Premika

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  3. Impact evaluation of the large scale integration of electric vehicles in the security of supply

    Science.gov (United States)

    Bremermann, Leonardo Elizeire

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  4. Analysis of vegetation dynamics using time-series vegetation index data from Earth observation satellites

    Science.gov (United States)

    Rodrigues, Arlete da Silva

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  5. Stellar activity in high-precision photometric and spectroscopic transit observations

    Science.gov (United States)

    Oshagh, Mahmoudreza

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  6. Birefringence and Bragg grating control in femtosecond laser written optical circuits

    Science.gov (United States)

    Fernandes, Luis A.

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  7. Viscoelastic nanocapsules under flow in microdevices

    Science.gov (United States)

    Cordeiro, Ana Lucinda Teixeira

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  8. Starch and polyethylene based bone-analogue composite biomaterials

    Science.gov (United States)

    Reis, Rui Luis Goncalves dos

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  9. Seismic assessment of reinforced concrete frame structures with a new flexibility based element

    Science.gov (United States)

    Arede, Antonio Jose Coelho Dias

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  10. Reciprocal interaction between human microvascular endothelial cells and mesenchymal stem cells on macroporous granules of nanostructured-hydroxyapatite agglomerates

    Science.gov (United States)

    Laranjeira, Marta de Sousa

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  11. Biological effects of polyacrylic acid-coated and non-coated superparamagnetic iron oxide nanoparticles in in vitro and in vivo experimental models

    Science.gov (United States)

    Couto, Diana Manuel Mocho de Bastos

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  12. Albumin and fibronectin adsorption and osteoblast adhesion on titanium oxides

    Science.gov (United States)

    Freitas, Susana Maria Ribeiro e. Sousa Mendes de

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  13. Improving the characteristics of foundry alloys AlSiCuMg during manufacturing

    Science.gov (United States)

    Fragoso, Bruno Filipe Marques

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  14. Magnetism at the nanoscale: Nanoparticles, nanowires, nanotubes and their ordered arrays

    Science.gov (United States)

    Proenca, Mariana Jesus Paiva

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  15. Clinopyroxene based glasses and glass-ceramics for functional applications

    Science.gov (United States)

    Goel, Ashutosh

    As piroxenas sao um vasto grupo de silicatos minerais encontrados em muitas rochas igneas e metamorficas. Na sua forma mais simples, estes silicatos sao constituidas por cadeias de SiO3 ligando grupos tetrahedricos de SiO4. A formula quimica geral das piroxenas e M2M1T2O6, onde M2 se refere a catioes geralmente em uma coordenacao octaedrica distorcida (Mg2+, Fe2+, Mn2+, Li+, Ca2+, Na+), M1 refere-se a catioes numa coordenacao octaedrica regular (Al3+, Fe3+, Ti4+, Cr3+, V3+, Ti3+, Zr4+, Sc3+, Zn2+, Mg2+, Fe2+, Mn2+), e T a catioes em coordenacao tetrahedrica (Si4+, Al3+, Fe3+). As piroxenas com estrutura monoclinica sao designadas de clinopiroxenes. A estabilidade das clinopyroxenes num espectro de composicoes quimicas amplo, em conjugacao com a possibilidade de ajustar as suas propriedades fisicas e quimicas e a durabilidade quimica, tem gerado um interesse mundial devido a suas aplicacoes em ciencia e tecnologia de materiais. Este trabalho trata do desenvolvimento de vidros e de vitro-cerâmicos baseadas de clinopiroxenas para aplicacoes funcionais. O estudo teve objectivos cientificos e tecnologicos; nomeadamente, adquirir conhecimentos fundamentais sobre a formacao de fases cristalinas e solucoes solidas em determinados sistemas vitro-cerâmicos, e avaliar a viabilidade de aplicacao dos novos materiais em diferentes areas tecnologicas, com especial enfase sobre a selagem em celulas de combustivel de oxido solido (SOFC). Com este intuito, prepararam-se varios vidros e materiais vitro-cerâmicos ao longo das juntas Enstatite (MgSiO3) - diopsidio (CaMgSi2O6) e diopsidio (CaMgSi2O6) - Ca - Tschermak (CaAlSi2O6), os quais foram caracterizados atraves de um vasto leque de tecnicas. Todos os vidros foram preparados por fusao-arrefecimento enquanto os vitro-cerâmicos foram obtidos quer por sinterizacao e cristalizacao de fritas, quer por nucleacao e cristalizacao de vidros monoliticos. Estudaram-se ainda os efeitos de varias substituicoes ionicas em composicoes de

  16. Chemical and isotopic study of thermal springs and gas discharges from Sierra de Chiapas, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Nencetti, A; Tassi, F; Vaselli, O [Department of Earth Sciences, Florence (Italy); Macias, J. L [Instituto de Geofisica, Universidad Nacional Autonoma de Mexico, D.F. (Mexico); Magro, G [CNR-Institute of Geosciences and Earth Resources, Pisa (Italy); Capaccioni, B [Institute of Volcanology and Geochemistry, Urbino (Italy); Minissale, A [CNR-Institute of Geosciences and Earth Resources, Florence (Italy); Mora, J. C [Instituto de Geofisica, Universidad Nacional Autonoma de Mexico, D.F. (Mexico)

    2005-01-15

    Thermal water and gas discharges south-east of El Chichon volcano, Mexico are associated mainly with NW-SE oriented fault systems. Spring discharges include i) waters with Na-Cl composition and TDS>3000 mg/L; ii) waters with Ca-SO{sub 4} composition and TDS values between 1400 and 2300 mg/L; iii) waters with Na-Cl composition and TDS of 800 to 2400 mg/L and sulphate content up to 650 mg/L and iv) waters with Ca-HCO{sub 3} composition and low salinity (TDS <250mg/L). Most of these waters are associated with free-gas discharges of N{sub 2} (up to 93 % by vol.), CO{sub 2} (2.4 to 31.2 % by vol.) and Ar (up to 1.25 % by vol.) with a predominant meteoric origin. H{sub 2}S is present only in gas samplers collected at El Azufre (up to 1.1 % by vol.). The {delta}13C CO{sub 2} values are always below -9.7% (PDB) and suggest a partially biogenic origin for CO{sub 2}. Chemical and isotopic features of spring discharges indicate that fluid circulation in the Sierra de Chiapas is mainly regulated by meteoric waters that tend to infiltrate the upper and middle-Cretaceous carbonate units up to the lower Cretaceous-upper Jurassic evaporitic formations (by Lopez-Ramos, 1982). The latter provide the main source of the species in solution. No evidence for high-to-medium enthalpy systems at depth beneath the Sierra de Chiapas has been found. [Spanish] La Sierra de Chiapas localizada en el Sureste de Mexico, se caracteriza por la presencia de descargas de gas y agua. La mayoria de los manantiales termales se asocian a rocas volcanicas Terciarias a lo largo de fallas regionales con orientacion NOSE. Las descargas termales se dividen en cuatro grupos: i) aguas con composicion Na-Cl y Solidos Disueltos Totales (SDT) >3000 mg/L; ii) aguas con composicion Ca-SO{sub 4} y valores de SDT entre 1400 y 2300 mg/L; iii) aguas con composicion Na-Cl, bajos contenidos de SDT (800 2400 mg/L) y un contenido de sulfato alto (hasta 650 mg/L) y iv) aguas con una composicion Ca-HCO{sub 3} y salinidad baja

  17. REVISIÓN: MICROENCAPSULACIÓN DE ALIMENTOS FOOD MICROENCAPSULATION: A REVIEW

    Directory of Open Access Journals (Sweden)

    Ricardo Adolfo Parra Huertas

    2010-12-01

    Full Text Available La microencapsulación es definida como una tecnología de empaquetamiento de materiales sólidos, líquidos o gaseosos. Las microcápsulas selladas puede liberar sus contenidos a velocidades controladas bajo condiciones específicas, y pueden proteger el producto encapsulado de la luz y el oxígeno. La microencapsulación consiste en micropartículas conformadas por una membrana polimérica porosa contenedora de una sustancia activa. El material o mezclas de materiales a encapsular puede ser cubierto o atrapado dentro de otro material o sistema. Una microcápsula consiste de una membrana semi-permeable, esférica, delgada y fuerte alrededor de un centro solido/líquido. Los materiales que se utilizan para el encapsulamiento pueden ser gelatina, grasas, aceites, goma arábiga, alginato de calcio, ceras, almidón de trigo, maíz, arroz, papa, nylon, ciclodextrina, maltodextrina, caseinato de sodio, proteína de lactosuero o proteína de soya. Las aplicaciones de la microencapsulación se dirigen a la industria, se da a la industria textil, metalúrgica, química, alimenticia, cosméticos, farmacéutica y medicina. Dentro de las técnicas utilizadas para microencapsular se encuentran el secado por aspersión, secado por enfriamiento, secado por congelamiento, coacervación y extrusión. Las sustancias que se microencapsulan pueden ser vitaminas, minerales, colorantes, prebióticos, probióticos, sabores nutraceúticos, antioxidantes, olores, aceites, enzimas, bacterias, perfumes, drogas e incluso fertilizantes.Microencapsulation is defined as a technology of packaging solids, liquids or gases. The microcapsules can release their contents sealed at controlled rates under specific conditions, and can protect the encapsulated product of light and oxygen. Microencapsulation is formed by a micro-porous polymeric membrane of an active substance container. The material or mixture of encapsulating materials can be coated or entrapped within another

  18. Effects of the heat input in the mechanical integrity of the welding joints welded by GMAW and LBW process in Transformation Induced Plasticity steel (TRIP used in the automotive industry

    Directory of Open Access Journals (Sweden)

    Victor H. López Cortéz

    2010-09-01

    Full Text Available In this work an Advanced High Strength Steel (AHSS sheet of the Transformation Induced Plasticity (TRIP type currently employed in the automotive sector was welded using a Gas Metal Arc Welding (GMAW and a CO2 Laser Beam Welding (LBW processes. The mechanical properties of welded tensile specimens including microhardness were determined and the results were related to the exhibited microstructures. It was found that LBW lead to relatively high hardness in the fusion zone (FZ indicating that the resultant microstructure was predominantly martensite. In the Heat Affected Zone (HAZ, a mixture of phases consisting of bainite and ferrite was present. Similar phase mixtures were found in the HAZ and Fusion Zone (FZ of the GMAW samples. The exhibited microstructure did not result in mechanical degradation when the GMAW specimens were tested in tension as all the fractures occurred in the BM. In contrast, the region adjacent to the HAZ of most tensile specimens welded using LBW failed by brittle cleavage. Apparently, in this region tempering effects due to heat dissipation in the LBW process promoted carbide growth and a relatively coarse microstructure. No embrittlement was found that could be associated with the development of martensite.Neste trabalho, uma chapa de aço de alta resistência (AHSS - Advanced High Strength Steel tipo TRIP (Transformation Induced Plasticity empregado atualmente no setor automotivo foi soldado usando o processo de soldagem a arco com arame solido sob proteção gasosa (GMAW e soldagem com LASER de CO2 (LBW. As propriedades mecânicas das amostras soldadas quanto a tração e microdureza foram determinadas e os resultados foram relacionados com as microestruturas apresentadas. Verificou-se que a solda com LBW chegou a valores realtivamente altos de dureza na zona fundida (ZF, indicando que a microestrutura resultante foi predominantemente de martensita. Na zona termicamente afetadas (ZTA, encontrou-se uma mistura de fases

  19. Obtainment of Hg-free Mn/Zn solutions from spent alkaline batteries; Obtencion de soluciones de Mn/Zn libres de Hg provenientes de pilas alcalinas gastadas

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Nicolas, L.; Espinosa-Ramirez, I. [Instituto Politecnico Nacional, UPALM, Mexico, D.F. (Mexico)]. E-mail: lepeni@hotmail.com; Aguilar, M. [Instituto de Fisica, UNAM, Mexico, D.F. (Mexico); Palacios-Beas, E. [Instituto Politecnico Nacional, UPALM, Mexico, D.F. (Mexico)

    2009-09-15

    a la naturaleza, terminando en basureros al aire libre o contenedores donde son incinerados, contaminando el ambiente, los suelos y los mantos acuiferos del planeta. Por lo anterior, en el presente trabajo se estudia la obtencion de soluciones de Mn y Zn (Mn/Zn {>=} 1) libres de Hg a partir de pilas alcalinas gastadas, para su utilizacion en la sintesis de ferritas (Mn,Zn)Fe{sub 2}O{sub 4} por via humeda. Se analiza el efecto del medio disolvente (H{sub 2}SO{sub 4}/H{sub 2}O{sub 2}, HCl y HCl/NO{sub 3}), la temperatura y el tiempo sobre el porcentaje de disolucion de los metales presentes en el material electrodico, utilizando espectroscopia de absorcion atomica (AA) y difraccion de rayos X (DRX) para la caracterizacion. Los resultados de la investigacion indican que las mejores condiciones de disolucion son MD=H{sub 2}SO{sub 4}/H{sub 2}O{sub 2}, T=50 grados centigrados y t =30 min, donde se obtiene 94.1 y 90.7 % (w/w) de Mn y Zn respectivamente, con Mn/Zn = 1.51. Se determino que el contenido de mercurio es 3.91%, superior al declarado en las especificaciones de las pilas, que se recupera mediante disolucion con HCl/HNO{sub 3} en el solido remanente.

  20. Optimización del tratamiento de aguas residuales de cultivos de flores usando humedales construidos de flujo subsuperficial horizontal

    Directory of Open Access Journals (Sweden)

    Mónica L. Jaramillo-Gallego

    2016-02-01

    Full Text Available Resumen Objetivo: optimizar un sistema de tratamiento de aguas residuales de cultivos de flores, con el fin de mejorar la eficiencia en la remoción de los contaminantes, usando humedales construidos de flujo subsuperficial-horizontal. Metodología: se realizó un estudio de tipo exploratorio experimental en dos etapas, en la primera se efectuó el acondicionamiento fisicoquímico y biológico del sistema de tratamiento, en la segunda, se llevó a cabo el seguimiento de la remoción de los contaminantes durante nueve meses, para lo cual se monitoreó la demanda química de oxígeno, demanda biológica de oxígeno, sólidos totales, sólidos suspendidos totales, pH y oxígeno disuelto. Resultados: Se logró mejorar la eficiencia del sistema de tratamiento en 7,1% para la Demanda biológica de oxígeno, 4,1% Demanda química de oxígeno, 56,9% sólidos totales y 117,2% solidos suspendidos totales. Conclusión: La concentración de DQO disminuyó con el tratamiento primario (Precipitación y oxidación química y favoreció la eficiencia del sistema de tratamiento secundario, dado que las aguas a tratar tenían valores muy altos de DQO que pueden saturar los humedales con contaminantes persistentes. Se podrían obtener mayores eficiencias, si se logra mejorar el sistema de tratamiento primario. Abstract Objective: to optimize the wastewater treatment system of flower crops in order to improve pollutant removal efficiency, using a horizontal subsurface flow constructed wetland. Methodology: An exploratory experimental study was conducted in two stages; in the first stage the treatment system was conditioned physically, chemically and biologically. In the second stage pollutant removal was monitored for nine months. To achieve this, chemical oxygen demand, biological oxygen demand, total solids, total suspended solids, pH and dissolved oxygen were monitored. Results: It was possible to improve the efficiency of the treatment system in 7.1% for

  1. Inferred of vorticity structures of flow that go around of a obstacle, by means of Euleriano tridimentional model; Inferencia de estructuras vorticosas del flujo que pasa alrededor de un obstaculo, mediante un modelo euleriano tridimensional

    Energy Technology Data Exchange (ETDEWEB)

    Millan Barrera, C.; Ramirez Leon, H. [Instituto Mexicano de Tecnologia del Agua, Morelos (Mexico)

    2001-02-01

    More than 100 years ago. It was inferred the existence of secondary currents in open channels on the basis of the fact that the maximum velocity occurred just below the free surface indeed another one, the cyclic variation of the concentration of suspended sediment in the span wise direction of them. Gibson, estimated that the velocity of the secondary currents would be about 5% of mainstream velocity. In spite of their apparent weakness, the secondary currents play an essential role in the lateral transfer of momentum, energy heat and mass in a channel, and thus their distributions show variations in all three dimensions. In the same form, for the most part they are responsible of the bed patterns in high content sediment suspended flows. The importance of secondary flows is manifested on the fact of the introduction from vorticity concept. In this work, some results obtained with a 3-D Eulerian model to which has coupled the statistical vorticity equation, are shown. Correlations U{sub i}W{sub j} were modeled according to U{sub i}U{sub j} correlations using the fluid flow turbulence properties. Model is applied to a flow deformed by a three dimensional obstacle at the bottom. Simulation results of the vorticity show similarities with other flow patterns behaviors found in experimental investigations. This work will be used as a background to subsequent studies concerning dynamical processes of the particles movement on the bottom of a channel. [Spanish] Hace mas de cien anos, se infirio la existencia de corrientes secundarias basandose en el hecho de que la velocidad maxima en canales se encuentra justo debajo de la superficie libre, y el de la variacion ciclica de solidos suspendidos en la direccion transversal de un canal. Gibson, estimo la velocidad aproximada de tales corrientes como aproximadamente el 5% de la velocidad principal. A pesar de su aparente debilidad, las corrientes secundarias juegan un papel esencial en la transferencia lateral de cantidad de

  2. Search for alkaloids on callus culture of Passiflora alata

    Directory of Open Access Journals (Sweden)

    Michelli Wesz Machado

    2010-08-01

    para germinação apos assepsia, e a formação de calo foi iniciada em meio MS com quantidades adequadas de fitohormonios, previamente determinadas. Sessenta dias após a inoculação os calos foram repicados para meio semi-solido com e sem L-triptofano (50, 100, 200 mg/L, mantidos por 90 dias em condições padrão. Amostras foram coletadas com 6, 16, 26, 36, e 90 dias, realizada extração acido-base e o extrato analisado por CLAE. Os resultados mostraram a ausência de harmana, harmina, harmol, harmalol e harmalina. Dois picos presentes nas amostras com L-triptofano foram coletados e analisados através de espectrometria de massas, electrospray modo positiva [ESI(+-MS] e analise em tandem ESI(+-MS/MS. Os espectros correspondentes foram similares, mostrando a perda consecutiva de 68 Da, atribuídos ao pirazol. Este fato aponta para uma transformação não enzimática, não relacionada a uma biossintese previamente descrita para alcalóides β-carbolínicos.

  3. Lake Chapala, Mexico: lead distribution in water, sediment and bacteria; Escenarios de la distribucion de plomo en agua, sedimentos y bacterias del lago de Chapala, Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Anne M. [Instituto Mexicano de Tecnologia del Agua, Jiutepec, Morelos (Mexico); Villa-Navia, Adriana [Interventor Ambiental de Occidental de Colombia, Inc. (Colombia); Afferden, Manfred van [Instituto Mexicano de Tecnologia del Agua, Jiutepec, Morelos (Mexico)

    2006-04-15

    To evaluate the distribution of lead in the natural resources of lake Chapala, the adsorption of this metal in bacteria was analyzed and, through published data and the application of a chemical equilibrium model, the risk associated with the consumption of fish and water was estimated. Adsorption experiments of lead in three bacterial strains and simulations of the distribution of lead in the water-sediment-bacteria system indicate that the distribution of lead in the lake depends on variations of water quality such as suspended solids, lead and biomass concentrations. Considering only the lead contained in the bottom sediments, the simulations suggest that concentrations do not exceed the limits nor the criteria for use and protection of water, sediments, and biota. Considering an additional source of lead that locally increases the concentration by a factor of ten, the amount of lead in water and sediments may exceed these limits. The bioaccumulation of lead in lake Chapala was evaluated through calculation of bioconcentration and biomagnification factors, using simulated and published data on lead in fish (Ayla Jay y Ford, 2001). The results indicate that lead may be concentrated 721 and 6,195 times in bacteria and fish, respectively. Furthermore, bioaccumulation of lead in the lake may occur mainly as bioconcentration in fish rather than biomagnification in the food chain. [Spanish] Para evaluar la distribucion de plomo en los recursos naturales en el lago de Chapala se analizo la adsorcion de este metal en bacterias y, mediante datos publicados en la literatura y modelacion numerica, se estimo el riesgo asociado al consumo de peces y agua. Experimentos de adsorcion en tres cepas de bacterias y simulaciones de la distribucion en un sistema agua-sedimentos-bacterias indican que la distribucion del plomo en el lago depende de variaciones en calidad del agua tales como solidos suspendidos totales, plomo total y biomasa. Considerando unicamente el plomo contenido

  4. Determining the optimal dose of Fenton reagent in a leachate treatment by Fenton-adsorption; Determinacion de la dosis optima de reactivo Fenton en un tratamiento de lixiviados por Fenton-adsorcion

    Energy Technology Data Exchange (ETDEWEB)

    Mendez Novelo, Roger Ivan; Pietrogiovanna Bronca, Jose Alfredo; Santos Ocampo, Beatriz; Sauri Riancho, Maria Rosa; Giacoman Vallejos, German; Castillo Borges, Elba Rene [Universidad Autonoma de Yucatan, Facultad de Ingenieria, Merida, Yucatan (Mexico)]. E-mail: mnovelo@uady.mx

    2010-07-01

    Leachates are formed as a result of the percolation of liquids, through the solid wastes in stabilization process. Their composition is variable and highly toxic; therefore, leachates treatment is a complex task. Due to the high permeability of the soil of the Yucatan Peninsula leachates represent a high risk to health. Fenton type oxidation and adsorption treatment have been tested, and they have showed better results than other types of biological or physicochemical treatment. Fenton process consists in treating the contaminant load with a combination of H{sub 2}O{sub 2} and FeSO{sub 4} under acidic conditions. Experiments were conducted in order to determine if filtration was better than the sedimentation of the sludges. The optimum contact time and the best relations [Fe{sup 2+}]/[H{sub 2}O{sub 2}] and [COD]/[H{sub 2}O{sub 2}] were determined. Subsequently, the oxidized samples were filtered and the adsorption process was tested using two columns in series packed with activated carbon. It was concluded that the sludge generated by the Fenton process was removed more efficiently through filtration than sedimentation. Optimal contact times were 5 min for COD removal, and 1 hour for colour removal; process time was set to one hour in order to protect the activated carbon. The best relations for [Fe{sup 2+}]/[H{sub 2}O{sub 2}] and [COD]/[H{sub 2}O{sub 2}] were 0.6 and 9 respectively. The maximum removal efficiency after the adsorption process was 98.9% for COD and 100% for colour at zero time of the column. A final biodegradability index of 0.24 was reached after the Fenton-adsorption tests. [Spanish] Los lixiviados son el resultado de la percolacion de liquidos a traves de los desechos solidos en proceso de estabilizacion. La complejidad de su tratamiento se debe a que su composicion es altamente toxica y variable. Lo anterior y el suelo altamente permeable de la peninsula de Yucatan, representan un alto peligro a la salud. Se ensayo un tratamiento de oxidacion

  5. Thermal conductivity of molten metals

    Energy Technology Data Exchange (ETDEWEB)

    Peralta-Martinez, Maria Vita

    2000-02-01

    configuracion de puente electronico para llevar a cabo la medicion del cambio de resistencia del alambre de platino en el rango de tiempo de 20{mu}s a 1s el cambio de resistencia se convierte a cambio de temperatura mediante una calibracion adecuada. De estas mediciones de temperatura como una funcion del tiempo, la conductividad termica de los metales fundidos se ha reducido usando el Metodo del Elemento Finito, para la solucion de las ecuaciones de trabajo. Este trabajo ha logrado su objetivo de mejorar la precision de las mediciones de la conductividad termica de metales fundidos de {+-} 20% a {+-} 2%. Las mediciones se llevaron a cabo para mercurio liquido, galio, indio y estano en una gama de temperaturas de 300 a 750 K, a presion atmosferica. En cada caso los resultados se comparan con las predicciones usando la ley Wiedermann and Franz la que, aunque esta basada en metales al estado solido, todavia es la unica opcion teorica disponible para la (abstract truncated)

  6. Determination of the thermal conductivity of metallic coatings; Determinacion de la conductividad termica de recubrimientos metalicos

    Energy Technology Data Exchange (ETDEWEB)

    Uc Way, Manuel Eugenio

    1998-02-01

    obtained. This value is small when it is compared with the effect that introduces the deposition of slag in these banks of tubes, that is in the order of 50 to 250 Celsuis degrees approximately, for this interval of thermal flows. [Espanol] Debido a la corrosion por alta temperatura se tiene un serio problema por indisponibilidad y eficiencia de los generadores de vapor en las centrales termoelectricas. Una de las partes mas afectadas por este fenomeno son los bancos de tubos de los sobrecalentadores. Con el objeto de disminuir dicho problema se pretende aplicar a los tubos antes mencionados un recubrimiento metalico a base de niquel y cromo (80Ni20Cr), la deposicion del recubrimiento se hace por el metodo de termorrociado de polvos por flama. El espesor del recubrimiento una vez que ha sido depositado es del orden de 500mm, es indudable que el flujo termico entre los gases de combustion y el fluido conducido en los tubos se ve afectado. Por esto es importante conocer la conductividad termica del recubrimiento a fin de evaluar el impacto que se tiene en el funcionamiento del generador de vapor. Esta necesidad es la que da lugar al presente proyecto de tesis, en el cual se disena una tecnica que permite medir la conductividad termica del recubrimiento. La experimentacion se lleva a cabo tomando como punto de partida la norma E1225-87 de la ASTM y se adecua a las caracteristicas del material a probar. Se diseno una probeta de acero inoxidable 316 para medir el flujo termico que atraviesa el recubrimiento. Primero se caracterizo la instalacion experimental a fin de determinar su confiabilidad. Posteriormente se realizo la experimentacion encontrandose una conductividad termica promedio de 12.09{+-}0.72 W/m K en el intervalo de temperatura de 110-180 grados Celsius. Este valor es 12.3% inferior al correspondiente a un metal solido de la misma composicion. Si consideramos que en los bancos de alta temperatura de los generadores de vapor el flujo termico se encuentra en el

  7. Bulk and interfacial molecular structure near liquid-liquid critical points

    Energy Technology Data Exchange (ETDEWEB)

    Manzanares-Papayanopoulos, Emilio

    2000-09-01

    relativamente poco estudio en comparacion con el enorme esfuerzo realizado durante los pasados 30 anos en elucidar los aspectos macroscopicos y fenomenologicos de la criticidad. La firma de la criticidad a nivel molecular es el tema central del que trata esta investigacion. El objetivo del trabajo descrito en esta tesis fue el de investigar las propiedades de superficie y transporte de mezcla liquidas binarias en las cercanias del punto critico. Las propiedades de superficie principalmente relativas a la adsorcion y al comportamiento humectante en las interfaces vapor-liquido y liquido-solido. La propiedad de transporte estudiada fue la viscosidad al corte a nivel masivo o macroscopico y la correspondiente propiedad a nivel molecular o microscopico, la microviscosidad. El trabajo presentado en esta tesis comprende las mediciones experimentales y las interpretaciones teoricas sacadas de estos resultados.El trabajo experimental fue variado,usando tanto tecnicas clasicas como modernas.

  8. OBTENCIÓN DE BIOCOMBUSTIBLES PRODUCTO DE LA PIROLISIS RÁPIDA DE RESIDUOS DE PALMA AFRICANA (Elaeis guineensis Jacq. OBTENÇÃO DE BICOMBUSTÍVEIS POR PIRÓLISE RÁPIDA DE RESÍDUOS DE PALMA DE DENDÊ (Elaeisg uineensis Jacq. BIOFUELS PRODUCTION BY FAST PYROLYSIS OF PALM OIL WASTES (Elaeis guineensis Jacq.

    Directory of Open Access Journals (Sweden)

    JUAN C. ARTEAGA V.

    2012-12-01

    Full Text Available El objetivo de este trabajo es la obtención de biocombustibles por medio de la pirólisis rápida de residuos de palma africana (Elaeis guineensis Jacq., en un reactor de caída libre. Previamente la biomasa es sometida a un proceso de tamizado y secado, para luego ser alimentada al reactor. Producto de la pirolisis se obtiene carbonizado, gasesincondensables y un líquido condensado (bio-oil,compuesto de alcoholes, ácidos carboxílicos, alcanos y compuestos aromáticos. Las pruebas se realizaron en un rango de temperaturas entre 500-700°C y se encontró que a 600°C el rendimiento del proceso fue máximo con un 23.3% de biocombustible condensado. La composición de los gases a 600°C fue CO22,720%, H20,703 % , CH41,289%, CO 2,472 % y el resto es N2. La mayor cantidad de gases incondensables se obtuvo a 700°C pero el rendimiento del bio-oil es solo del 14.9% en peso. Los resultados evidencian que la temperatura del reactor es un parámetro importante en la composición de los gases y el rendimiento del bio-oil. Una fase posterior será evaluar costos y beneficios para re-configurar el reactor de manera tal que se optimice el rendimiento en la producción de bio-oil evaluando la posibilidad de usar los gases incondensables como fuente de energía para la pirólisis.O objetivo destetrabalhofoi a obtenção de bicombustíveis a partir da pirólise rápida de resíduos de palma de dendê (Elaeis guineensis Jacq. num reator de queda livre. Inicialmente a biomassa passou por uma serie de peneiras, havendo sido posteriormente secada e finalmente fornecida ao reator. Após da pirólise, foram obtidos um carbonizado solido, uma fração gasosa e um liquido condensado (bio-oil, o qual é composto por alcoóis, ácidos carboxílicos, e hidrocarbonetos de tipo alcanos e aromáticos. Os testes foram feitos entre 500 - 700 ºC, encontrando se o maiorrendimento para o bio-oil a 600 ºCcomum 23.3 % em peso. A composição dos gases para esta temperatura foi

  9. Elastoplasticidad anisotropa de metales en grandes deformaciones

    Science.gov (United States)

    Caminero Torija, Miguel Angel

    exageradamente rigida de la solucion obtenida por el metodo de los elementos finitos estandar. Entre los elementos implementados cabe destacar el basado en la formulacion mixta u/p, que contiene una interpolacion adicional de grados de libertad de presion. Estos grados de libertad adicionales habitualmente son internos al elemento en mecanica de solidos. En este trabajo se ha desarrollado e implementado en DULCINEA una familia de elementos tridimensionales mixtos en grandes deformaciones que incluye el caso particular BMIX 27/27/4, basado en la formulacion u/p, constituido por 27 nudos, con 27 puntos de integracion estandar y 4 grados de libertad de presiones, y que pasa la condicion Inf-Sup o de Babuska-Brezzi. Sin embargo, se ha observado que la formulacion u/p presenta ciertas limitaciones bajo las hipotesis conjuntas de anisotropia elastica y anisotropia plastica. (Abstract shortened by UMI.)

  10. Applications of ultrasound in electrochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Silva Martinez, Susana

    1997-10-01

    employed in the present study. The bubble behaviour was observed from the numerical solution of the RPNNP equation that describes the motion of a gas filled bubble in a homogeneous phase. This equation was solved numerically employing the Fourorder Runge-Kutta method. Finally, a preliminary study of surface process in the presence of ultrasound is presented. Erosion current events were recorded at high time solution. These current events were attributed to the reoxidation of the exposed metal as a result of cavitation events. This study shows that surface erosion can be electrochemically investigated in-situ withing a cavitating media. [Espanol] El efecto del ultrasonido en procesos electroquimicos ha sido investigado empleando un micro-electrodo dentro de un medio cavitante. El transporte de masa transitorio fue realzado fuertemente en la presencia de ultrasonido. Altos indices de la transferencia de masa de hasta 1.5 cm s-1 fueron observados. Estos altos indices de la transferencia de masa fueron atribuidos a dos procesos de la cavitacion. Primero, el colapso de la burbuja en/o cerca de la interfase solido-liquido con la formacion consiguiente de un microjet liquido de alta velocidad dirigido hacia la superficie del electrodo. En segundo lugar, movimiento de la burbuja cerca o dentro de la capa de difusion o del electrodo. Tambien se registraron los simples transitorios de corriente a una alta resolucion de tiempo. Estos transitorios simples de corriente fueron atribuidos a la perturbacion a corto plazo del campo de difusion del micro-electrodo debido a los impactos de cavitacion del colapso de la burbuja seguido por una relajacion de largo tiempo del campo de la difusion de nuevo al estado estable. La influencia de la fuente ultrasonica a la separacion del electrodo, la temperatura total de la solucion, el potencial del electrodo y el tamano del electrodo sobre la magnitud de transitorios de corriente tambien fue estudiada. Todos estos parametros afectaron marcadamente

  11. Production of hydrogen using the combination of water-gas shift and carbonatation reaction of a CO{sub 2} absorbent; Produccion de hidrogeno mediante la combinacion de las reacciones de desplazamiento de agua y carbonatacion de un absorbente de CO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Escobedo-Bretado, M. A.; Ponce-Pena, P. [Facultad de Ciencias Quimicas, UJED, Durango, Durango (Mexico)]. E-mail: miguel.escobedo@ujed.mx; Delgado-Vigil, M. D.; Salinas-Gutierrez, J. M.; Lopez Ortiz, A.; Collins-Martinez, V.H. [Centro de Investigacion en Materiales Avanzados, S.C., Chihuahua, Chihuahua (Mexico)

    2009-09-15

    The production of hydrogen by the water-gas shift (WGS) normally requires multiple catalytic reactions followed by the separation of CO{sub 2} to obtain highly pure H{sub 2}. Nevertheless, using the combination of the WGS reaction and the solid-gas reaction between CO{sub 2} and an absorbent, the production of H{sub 2} and the separation of CO{sub 2} can be accomplished in a single step AEWGS (Absorption Enhanced Water Gas Shift). This combination of reactions was studied at the laboratory scale using a quartz fixed-bed reactor. The absorbents tested were calcined dolomite (CaO*MgO) and sodium zirconate (Na{sub 2}ZrO{sub 3}) in catalyst/absorbent mixtures (cat/abs) with weight ratios of 1/1, 1/2 and 2/1, using a high-temperature catalyst from the WGS reaction, synthesized in the laboratory (Fe-Cr). All the tests used 3cm{sup 3} of cat/abs, composed of 5% CO, 15% H{sub 2}O, 10.5% He and 69.5% N{sub 2}, with a spatial velocity (SV) of 1500h-1, 600 degrees Celsius and atmospheric pressure. The catalyst presented 100% conversion of CO to CO{sub 2}, maintaining its surface area after the reaction (12 m{sup 2}/g). The results with a dry base using the cat/abs mixture of 1/2 and CaO*MgO generated 95% H{sub 2} with 5% CO-free CO{sub 2}, while with Na{sub 2}ZrO{sub 3}, the maximum concentration of H{sub 2} was 70%, with 29% CO{sub 2} and 1% of CO without reacting. The results using only CaO*MgO (as a bifunctional material) presented a maximum H{sub 2} concentration of 96% and a minimum of 4% CO{sub 2}, as well as 7% CO without reaction, which was attributed to kinetic effects. [Spanish] La produccion de hidrogeno mediante la reaccion de desplazamiento de agua WGS (Water Gas Shift), normalmente requiere de multiples reacciones cataliticas seguidas por la separacion de CO{sub 2} para obtener H{sub 2} de alta pureza. Sin embargo mediante la combinacion de la reaccion WGS con la reaccion solido-gas entre el CO{sub 2} y un absorbente provee la oportunidad de producir H2 y

  12. Percepção dos produtores rurais de Tupã, SP, sobre o processo de comunicação para execução da logística reversa de embalagens de agrotóxicos

    Directory of Open Access Journals (Sweden)

    Cristiane Hengler Corrêa Bernardo

    2015-12-01

    Acesso em 20 mar. 2015. CANTOS, Clotilde; MIRANDA, Zoraide Amarante I.; LICCO, Eduardo Antonio. Contribuições para a Gestão das Embalagens Vazias de Agrotóxicos. ©INTERFACEHS - Revista de Gestão Integrada em Saúde do Trabalho e Meio Ambiente - v.3, n.2, Seção Interfacehs 1, abr./ agosto. 2008 www.interfacehs.sp.senac.br. CARBONI, Gleriani Torres; SATO, Geni Satiko; MOORI, Roberto Giro. Logística Reversa para Embalagens de Agrotóxicos no Brasil: Uma Visão sobre Conceitos e Práticas Operacionais.  XLIII CONGRESSO DA SOBER "Instituições, Eficiência, Gestão e Contratos no Sistema Agroindustrial". Ribeirão Preto, 24 a 27 de Julho de 2005. COMETTI, José Luís Said. Logística reversa das embalagens de agrotóxicos no Brasil: um  caminho sustentável?. 2009. 152 f., il. Dissertação (Mestrado em Desenvolvimento Sustentável-Universidade de Brasília, 2009. COSTA, Evandro. Política Nacional de Resíduos Sólidos / Logística Reversa. SIRECOM - Sindicato dos Representantes Comerciais do Paraná. Disponível em http://sirecompr.org.br/noticia/274/politica-nacional-de-residuos-solidos---logistica-reversa. Acesso em 03 set.2014. FARIA, Ana Cristina de; PEREIRA, Raquel da Silva. O Processo de Logística Reversa de Embalagens de Agrotóxicos: um estudo de caso sobre o INPEV. Organizações Rurais & Agroindustriais, Lavras, v. 14, n. 1, p. 127-141, 2012. GIL, Antonio Carlos. Métodos e Técnicas de Pesquisa Social. 6 ed. São Paulo: Atlas, 2014. GRUTZMACHER, Douglas Daniel et al. Embalagens Vazias de Agrotóxicos: organização dos fabricantes e suas obrigações (Lei Federal 9.974. R. Bras. Agrociência, Pelotas, v. 12, n. 1, p. 05-06, jan-mar, 2006. HAIR Jr, J. F.;MONEY, A. H.; BABIN, B.; SAMOUEL, P. Fundamentos de Metodos de Pesquisa Em Administraca. Bookman, 2005. LADEIRA, Wagner Junior; MAEHLER, Alisson Eduardo; NASCIMENTO, Luís Felipe  Machado do. Logística reversa de defensivos agrícolas: fatores que influenciam na consciência  ambiental de

  13. Caracterización fisicoquímica del crecimiento y desarrollo de los frutos de feijoa (Acca sellowiana Berg en los clones 41 (Quimba y 8-4

    Directory of Open Access Journals (Sweden)

    Rodríguez Mariela

    2006-06-01

    del crecimiento. Los clones 41(Quimba y 8-4 en las variables: diámetro transversal, diametro longitudinal, peso fresco y peso seco, exhibieron una curva de tipo sigmoidal. Asi mismo, se determino que los frutos de feijoa tienen muy bajos contenidos de almidon. Ademas, utilizando la tecnica de cromatografia liquida de alto desempeño (HPLC, se encontro que los azucares mas abundantes eran fructosa, sacarosa y glucosa. Otras variables medidas fueron los solidos solubles totales (SST, el pH y la acidez total titulable, que se incrementaron gradualmente durante el desarrollo del fruto.