WorldWideScience

Sample records for element programs trip

  1. TRIP: a finite element computer program for the solution of convection heat transfer problems

    International Nuclear Information System (INIS)

    Slagter, W.; Roodbergen, H.A.

    1976-01-01

    The theory and use of the finite element code TRIP are described. The code calculates temperature distributions in three-dimensional continua subjected to convection heat transfer. A variational principle for transport phenomena is applied to solve the convection heat transfer problem with temperature and heat flux boundary conditions. The finite element discretization technique is used to reduce the continuous spatial solution into a finite number of unknowns. The method is developed in detail to determine temperature distributions in coolant passages of fuel rod bundles which are idealized by hexahedral elements. The development of the TRIP code is discussed and the listing of the program is given in FORTRAN IV. An example is given to illustrate the validity and practicality of the method

  2. Analysis of 'human element related trip case book in Korean NPPs' using organizational factors

    International Nuclear Information System (INIS)

    Kim, S. Y.; Kim, Y. I.; Lee, Y. S.; Kim, C. S.; Jung, C. H.; Jung, W. D.

    2002-01-01

    There have been no studies appling organizational factors to data analysis in Korean NPPs. In this paper, data in 'human element related trip case book in Korean NPPs' are analyzed and categorized by the 20 organizational factors of NRC-BNL according to the cause of reactor trip. These inform us how organizational factors affected on the safety of Korean NPPs. Consequently important organizational factor are identified through which it is known that NPP organization would have a tendency

  3. Implementation of a roughness element to trip transition in large-eddy simulation

    Science.gov (United States)

    Boudet, J.; Monier, J.-F.; Gao, F.

    2015-02-01

    In aerodynamics, the laminar or turbulent regime of a boundary layer has a strong influence on friction or heat transfer. In practical applications, it is sometimes necessary to trip the transition to turbulent, and a common way is by use of a roughness element ( e.g. a step) on the wall. The present paper is concerned with the numerical implementation of such a trip in large-eddy simulations. The study is carried out on a flat-plate boundary layer configuration, with Reynolds number Rex=1.3×106. First, this work brings the opportunity to introduce a practical methodology to assess convergence in large-eddy simulations. Second, concerning the trip implementation, a volume source term is proposed and is shown to yield a smoother and faster transition than a grid step. Moreover, it is easier to implement and more adaptable. Finally, two subgrid-scale models are tested: the WALE model of Nicoud and Ducros ( Flow Turbul. Combust., vol. 62, 1999) and the shear-improved Smagorinsky model of Lévêque et al. ( J. Fluid Mech., vol. 570, 2007). Both models allow transition, but the former appears to yield a faster transition and a better prediction of friction in the turbulent regime.

  4. Evaluation of interface adhesion of hot-dipped zinc coating on TRIP steel with tensile testing and finite element calculation

    NARCIS (Netherlands)

    Song, G.M.; De Hosson, J.T.M.; Sloof, W.G.; Pei, Y.T.

    In this work, a methodology for the determination of the interface adhesion strength of zinc coating on TRIP steel is present. This method consists of a conventional tensile test in combination with finite element calculation. The relation between the average interface crack length and the applied

  5. Berkeley new element program

    International Nuclear Information System (INIS)

    Ghiorso, A.

    1975-09-01

    The work done with element 106 is reviewed, and a new experiment which bears on the properties of the isotope of mass 260 with atomic number 104 is discussed. It is noted that in the case of element 106 a link is demonstrated to the granddaughter as well as the daughter

  6. Programming the finite element method

    CERN Document Server

    Smith, I M; Margetts, L

    2013-01-01

    Many students, engineers, scientists and researchers have benefited from the practical, programming-oriented style of the previous editions of Programming the Finite Element Method, learning how to develop computer programs to solve specific engineering problems using the finite element method. This new fifth edition offers timely revisions that include programs and subroutine libraries fully updated to Fortran 2003, which are freely available online, and provides updated material on advances in parallel computing, thermal stress analysis, plasticity return algorithms, convection boundary c

  7. Influence of Minor Alloying Elements on Selective Oxidation and Reactive Wetting of CMnSi TRIP Steel during Hot Dip Galvanizing

    Science.gov (United States)

    Cho, Lawrence; Kim, Myung Soo; Kim, Young Ha; De Cooman, Bruno C.

    2014-09-01

    The influence of the addition of minor alloying elements on the selective oxidation and the reactive wetting of CMnSi transformation-induced plasticity (TRIP) steels was studied by means of galvanizing simulator tests. Five TRIP steels containing small alloying additions of Cr, Ni, Ti, Cu, and Sn were investigated. After intercritical annealing (IA) at 1093 K (820 °C) in a N2 + 5 pct H2 gas atmosphere with a dew point of 213 K (-60 °C), two types of oxides were formed on the strip surface: Mn-rich xMnO·SiO2 ( x > 1.5) and Si-rich xMnO·SiO2 ( x galvanizing. The addition of a small amount of Sn is shown to significantly decrease the density of Zn-coating defects on CMnSi TRIP steels.

  8. Science field trips to nuclear power plants - A low capital cost program

    International Nuclear Information System (INIS)

    Cramer, E.N.; Gabel, C.; Sayles, C.

    1991-01-01

    School science field trips to nuclear power plants can be quite rewarding to both students and teachers if the right material is used from a perspective different from the textbooks. One does not need a large, expensive facility to have a program useful to students that addresses adult issues understandably. San Onofre Nuclear Generating Station hosted ∼110 visits (simulator tours) averaging 2,700 visitors in each of calendar years 1989 and 1990 after averaging 75 visits in each of the five preceding years. Most audiences were from middle schools located within a 50-mile radius. The station does not have a separate visitor's center; a classroom is reserved at the station's training and education center. The advantage is using real working laboratories; the disadvantage is not having the more traditional displays and interactive models. Therefore, the instructor emphasizes showing the integrated engineering applications of chemistry, physics, and geology - rather than repeating material that is more easily taught in the school's classroom. Generic issues are emphasized rather than the design details of the plant systems

  9. UNOCAL Parachute Creek Shale Oil Program. Environmental Monitoring Plan - supplemental environmental. Volume 1. Trip 2 report. Rept. for 1988-90

    International Nuclear Information System (INIS)

    1991-01-01

    The Energy Security Act of 1980 established a program to provide financial assistance to private industry in the construction and operation of commercial-scale synthetic fuels plants. The Parachute Creek Shale Oil Program is one of four projects awarded financial assistance. The Program agreed to comply with existing environmental monitoring regulations and to develop an Environmental Monitoring Plan (EMP) incorporating supplemental monitoring in the areas of water, air, solid waste, and worker health and safety during the period 1985-1992. These activities are described in a series of quarterly and annual reports. The report contains results of three years of supplemental environmental sampling (Trial Trip, 1988; Trip 1, 1989; and Trip 2, 1990); Trip 2 sampling and analytical methods; quality assurance and quality control procedures; sampling and analytical methods; and corrected data from 1988 and 1989 gas and particulate concentrations

  10. Massively Parallel Finite Element Programming

    KAUST Repository

    Heister, Timo

    2010-01-01

    Today\\'s large finite element simulations require parallel algorithms to scale on clusters with thousands or tens of thousands of processor cores. We present data structures and algorithms to take advantage of the power of high performance computers in generic finite element codes. Existing generic finite element libraries often restrict the parallelization to parallel linear algebra routines. This is a limiting factor when solving on more than a few hundreds of cores. We describe routines for distributed storage of all major components coupled with efficient, scalable algorithms. We give an overview of our effort to enable the modern and generic finite element library deal.II to take advantage of the power of large clusters. In particular, we describe the construction of a distributed mesh and develop algorithms to fully parallelize the finite element calculation. Numerical results demonstrate good scalability. © 2010 Springer-Verlag.

  11. Massively Parallel Finite Element Programming

    KAUST Repository

    Heister, Timo; Kronbichler, Martin; Bangerth, Wolfgang

    2010-01-01

    Today's large finite element simulations require parallel algorithms to scale on clusters with thousands or tens of thousands of processor cores. We present data structures and algorithms to take advantage of the power of high performance computers in generic finite element codes. Existing generic finite element libraries often restrict the parallelization to parallel linear algebra routines. This is a limiting factor when solving on more than a few hundreds of cores. We describe routines for distributed storage of all major components coupled with efficient, scalable algorithms. We give an overview of our effort to enable the modern and generic finite element library deal.II to take advantage of the power of large clusters. In particular, we describe the construction of a distributed mesh and develop algorithms to fully parallelize the finite element calculation. Numerical results demonstrate good scalability. © 2010 Springer-Verlag.

  12. A description of a staff development program: Preparing the elementary school classroom teacher to lead environmental field trips and to use an integrated subject approach to environmental education

    Science.gov (United States)

    Egana, John Joseph

    This study of the Field Trip Specialist Program (FTS) described how a professional development plan fostered change in the traditional roles of third and fourth grade teachers. Teachers that volunteered were prepared to become interpretive guides for their class on environmental field trips, integrate their basic subject areas lessons into an environmental science context, and develop their self-perception as professional educators. This qualitative study made use of quantitative data and drew on information collected over four years from surveys, interviews, classroom observations, field trip and workshop observations, focus groups, journals and assessments performed in Florida. The FTS Program attracted teachers who thought it was important for all students to understand environmental issues, and these teachers believed in integrated instruction. These beliefs were inconsistent with many aspects of school culture. FTS invited the participation of these teachers and encouraged them to take control of the program by serving as instructors and program developers. Teachers described themselves as prepared to deliver the FTS Program with a high level of motivation and relevance. They also credited the program as beneficial in preparation for the Florida Comprehensive Assessment Tests (FCAT). Teachers reported that their responsibility as field trip leaders was the primary factor motivating them to provide conscientious presentation of pre- and post-field trip lessons and thorough integration of environmental topics in basic subject area instruction. Despite the impact of the field trip leadership factor, I could not find another program in the State of Florida that required teachers to lead their own field trips. Other influential factors specific to this program were: Voluntary participation, on-site field instruction, peer instructors and program developers, high quality and task specific materials, and pre- and post-assessments for students. Factors were identified

  13. Expert system for the CPCS-initiated trip analysis

    International Nuclear Information System (INIS)

    Sohn, Sedo; Im, Inyoung; Kuh, Jungeui

    1991-01-01

    In Yonggwang nuclear units 3 and 4, the core protection calculator system (CPCS) performs various protection logics against many transients and certain accidents. The CPCS is a real-time computer system calculating the departure from nucleate boiling ratio (DNBR), and local power density, and other protection logics. It takes process variables such as neutron flux, hot-leg temperature, cold-leg temperature, control element assembly positions, and reactor coolant pump shaft speed. Since the CPCS protection logics are quite complex, it is difficult for an operator to tell immediately which parameter is the major cause of the reactor trip. Thus, whenever the reactor trip signal is generated, the process input variables and calculated results, including selected intermediate variables, are frozen in the specified computer memory for later analysis. These frozen variables are called the trip buffer. Analysis of the trip buffer requires an expert in the CPCS and related documents containing algorithms and a data base for algorithms. The Trip Buffer Analysis Program (TBAP) is an expert system that pinpoints the causes of the CPCS initiated reactor trip, thus relieving the operator from the burden of analyzing the trip buffer

  14. ICARUS trip

    CERN Document Server

    Caraban Gonzalez, Noemi

    2017-01-01

    It’s lived in two different countries and is about to make its way to a third. It’s the largest machine of its kind, designed to find extremely elusive particles and tell us more about them. Its pioneering technology is the blueprint for some of the most advanced science experiments in the world. And this summer, it will travel across the Atlantic Ocean to its new home (and its new mission) at the U.S. Department of Energy’s Fermi National Accelerator Laboratory. It’s called ICARUS, and you can follow its journey over land and sea with the help of an interactive map at IcarusTrip.fnal.gov (link is external), or on Facebook (link is external), Twitter (link is external) and Instagram (link is external) using the hashtag #IcarusTrip.

  15. Writing analytic element programs in Python.

    Science.gov (United States)

    Bakker, Mark; Kelson, Victor A

    2009-01-01

    The analytic element method is a mesh-free approach for modeling ground water flow at both the local and the regional scale. With the advent of the Python object-oriented programming language, it has become relatively easy to write analytic element programs. In this article, an introduction is given of the basic principles of the analytic element method and of the Python programming language. A simple, yet flexible, object-oriented design is presented for analytic element codes using multiple inheritance. New types of analytic elements may be added without the need for any changes in the existing part of the code. The presented code may be used to model flow to wells (with either a specified discharge or drawdown) and streams (with a specified head). The code may be extended by any hydrogeologist with a healthy appetite for writing computer code to solve more complicated ground water flow problems. Copyright © 2009 The Author(s). Journal Compilation © 2009 National Ground Water Association.

  16. Elements of a nuclear criticality safety program

    International Nuclear Information System (INIS)

    Hopper, C.M.

    1995-01-01

    Nuclear criticality safety programs throughout the United States are quite successful, as compared with other safety disciplines, at protecting life and property, especially when regarded as a developing safety function with no historical perspective for the cause and effect of process nuclear criticality accidents before 1943. The programs evolved through self-imposed and regulatory-imposed incentives. They are the products of conscientious individuals, supportive corporations, obliged regulators, and intervenors (political, public, and private). The maturing of nuclear criticality safety programs throughout the United States has been spasmodic, with stability provided by the volunteer standards efforts within the American Nuclear Society. This presentation provides the status, relative to current needs, for nuclear criticality safety program elements that address organization of and assignments for nuclear criticality safety program responsibilities; personnel qualifications; and analytical capabilities for the technical definition of critical, subcritical, safety and operating limits, and program quality assurance

  17. Elements of an Employee Motivation Program

    Science.gov (United States)

    Ward, Ernest H.

    1974-01-01

    Ten elements which should be present in an employee motivation program are discussed in the context of achieving increased acceptance of organizational goals. They are: participation, performance measurement, knowledge of results, recognition; attitude measurement, communication, publicity, work assignment, work research, and supervisor motivation…

  18. Explicit Instruction Elements in Core Reading Programs

    Science.gov (United States)

    Child, Angela R.

    2012-01-01

    Classroom teachers are provided instructional recommendations for teaching reading from their adopted core reading programs (CRPs). Explicit instruction elements or what is also called instructional moves, including direct explanation, modeling, guided practice, independent practice, discussion, feedback, and monitoring, were examined within CRP…

  19. China's Population Program at the Grassroots Level: Report on a Field Trip, Summer 1972.

    Science.gov (United States)

    Chen, Pi-chao

    The goals of the Caltech Population Program are to increase understanding of the interrelationships between population growth and socioeconomic and cultural patterns throughout the world and to communicate this understanding. This series of occasional papers is one step in the process of communicating research results. The papers deal primarily…

  20. Elements of a total MOV maintenance program

    International Nuclear Information System (INIS)

    Lavallee, W.L.

    1989-01-01

    Establishing a good preventive and predictive maintenance program for motor-operated valves (MOVs) is an especially challenging task for nuclear power plants. Because of the sheer number of MOVs involved, all with somewhat different characteristics and requirements, and the extremely critical functions that some of the MOVs perform, the maintenance program quickly becomes a major exercise in coordination. This paper outlines a three-phase approach to achieving a comprehensive MOV maintenance program. It is based on experience in assisting nuclear plants with their MOV programs and encountering many of the pitfalls that can hamper these programs. The three phases include up-front engineering preparation, field diagnostic testing, and maintenance follow-up and trending. Each of these phases is discussed, and a flowchart describing the individual elements of each phase is provided

  1. Finite element program Lamcal. (User's manual)

    International Nuclear Information System (INIS)

    Lamain, L.G.; Blanckenburg, J.F.G.

    1982-01-01

    The present user's manual gives the input formats, job control and an input example for the finite element part of the Lamcal program. The input data have been organized in a more or less self explaining way, using keywords and standard input formats and is printed at the beginning of every run. To simplify the use of the whole program and to avoid unecessary data handling, all three parts of the Lamcal program, meshgeneration, plotting and, FE, are combined into one load module. This setup allows to do all calculations in one single run. However, preprocessing, postprocessing and restarts can be made in separate runs as well. The same reserved space for the dynamic core storage is used in all three parts, if the available space is not sufficient the FE program will stop

  2. Field Trips. Beginnings Workshop.

    Science.gov (United States)

    Cartwright, Sally; Aronson, Susan S.; Stacey, Susan; Winbush, Olga

    2001-01-01

    Five articles highlight benefits and organization of field trips: (1) "Field Trips Promote Child Learning at Its Best"; (2) "Planning for Maximum Benefit, Minimum Risk"; (3) "Coaching Community Hosts"; (4) "The Story of a Field Trip: Trash and Its Place within Children's Learning and Community"; and (5) "Field Trip Stories and Perspectives" (from…

  3. Elements of programming interviews the insider's guide

    CERN Document Server

    Aziz, Adnan; Prakash, Amit

    2015-01-01

    This is a larger-format version of Elements of Programming Interviews. The language is C++. Specifically, the font size is larger, and the page size is 7"x10" (the regular format uses 6"x9"). The content is identical. Have you ever... Wanted to work at an exciting futuristic company? Struggled with an interview problem that could have been solved in 15 minutes? Wished you could study real-world computing problems? If so, you need to read Elements of Programming Interviews (EPI). EPI is your comprehensive guide to interviewing for software development roles. The core of EPI is a collection of over 250 problems with detailed solutions. The problems are representative of interview questions asked at leading software companies. The problems are illustrated with 200 figures, 300 tested programs, and 150 additional variants. The book begins with a summary of the nontechnical aspects of interviewing, such as strategies for a great interview, common mistakes, perspectives from the other side of the table,...

  4. 28 CFR 570.45 - Violation of escorted trip.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Violation of escorted trip. 570.45 Section 570.45 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE COMMUNITY PROGRAMS AND RELEASE COMMUNITY PROGRAMS Escorted Trips § 570.45 Violation of escorted trip. (a) Staff shall process as...

  5. Healthy Ride Trip Data

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — A dataset that shows trips taken using the Healthy Ride system by quarter. The dataset includes bike number, membership type, trip start and end timestamp, and...

  6. A Trip to the Zoo: Children's Words and Photographs.

    Science.gov (United States)

    DeMarie, Darlene

    Field trips are a regular part of many programs for young children. Field trips can serve a variety of purposes, such as exposing children to new things or helping children to see familiar things in new ways. The purpose of this study was to learn the meaning children gave to a field trip. Cameras were made available to each of the children in a…

  7. Fellows in the Middle: Fabulous Field Trips

    Science.gov (United States)

    West, Mary Lou

    2008-05-01

    Montclair State University's NSF GK-12 Program focuses on grades 7 and 8 in five urban public school districts in northern New Jersey. Each year four fieldtrips are taken by the students, middle school teachers, and graduate student Fellows. Many interdisciplinary hands-on lessons are written for use before, during and after each trip with this year's theme of Earth history. The Sterling Hill Mine trip evoked lessons on geology, economics, crystal structure, density, and pH. A virtual trip (webcam link) to scientists in the rainforest of Panama prompted critical thinking, categorizing layers and animals, and construction of model food webs. In the field trip to the NJ School of Conservation the students will build model aquifers, measure tree heights, and measure stream flow to compare to their Hackensack River. Finally the students will travel to MSU for a Math/Science Day with research talks, lab tours, hands-on activities, and a poster session. In January 2008 seventeen teachers, Fellows, and grant personnel took a field trip to China to set up collaborations with researchers and schools in Beijing and Xi'an, including the Beijing Ancient Observatory. All field trips are fabulous! Next year (IYA) our theme will be planetary science and will feature field trips to the Newark Museum's Dreyfuss Planetarium, BCC Buehler Challenger & Science Center, and star parties. We look forward to invigorating middle school science and mathematics with exciting astronomy. Funded by NSF #0638708

  8. Describing of elements IO field in a testing computer program

    Directory of Open Access Journals (Sweden)

    Igor V. Loshkov

    2017-01-01

    Full Text Available A standard of describing the process of displaying interactive windows on a computer monitor, through which an output of questions and input of answers are implemented during computer testing, is presented in the article [11]. According to the proposed standard, the description of the process mentioned above is performed with a format line, containing element names, their parameters as well as grouping and auxiliary symbols. Program objects are described using elements of standard. The majority of objects create input and output windows on a computer monitor. The aim of our research was to develop a minimum possible set of elements of standard to perform mathematical and computer science testing.The choice of elements of the standard was conducted in parallel with the development and testing of the program that uses them. This approach made it possible to choose a sufficiently complete set of elements for testing in fields of study mentioned above. For the proposed elements, names were selected in such a way: firstly, they indicate their function and secondly, they coincide with the names of elements in other programming languages that are similar by function. Parameters, their names, their assignments and accepted values are proposed for the elements. The principle of name selection for the parameters was the same as for elements of the standard: the names should correspond to their assignments or coincide with names of similar parameters in other programming languages. The parameters define properties of objects. Particularly, while the elements of standard create windows, the parameters define object properties (location, size, appearance and the sequence in which windows are created. All elements of standard, proposed in this article are composed in a table, the columns of which have names and functions of these elements. Inside the table, the elements of standard are grouped row by row into four sets: input elements, output elements, input

  9. Basic elements of a risk management program

    International Nuclear Information System (INIS)

    Ericson, D.M. Jr.; Varnado, G.B.

    1991-01-01

    The modern industrial manger faces the challenge of safely and efficiently operating increasingly complex, sophisticated, and expensive plants in an atmosphere of reduced resources and increased competition, and frequently with heightened political and public oversight. These political and public concerns have become especially significant where the Federal Government regulates and/or funds programs that have a significant potential for adverse public safety or environmental impacts. Under these circumstances, a major accident or environmental insult could translate into major programmatic delay, redirection, or even plant closing. After-the-fact (reactive) resolution of safety and/or environment problems is both costly and time-consuming process. Therefore, it is prudent for managers at all levels to initiate aggressive proactive efforts to identify and control the risks (hazards) associated with their programs. Unfortunately, risk is not a concept with a single, universally accepted definition. It is most often represented as the product of the probability of occurrence of undesired events and the resultant consequences of those events. The consequences of concern may include: loss of human health, reduction in life expectancy, or loss of life; material or financial losses; environmental damage; or even societal disturbances. This paper discusses risk management and systems safety interest in which has intensified over the post decade principally because of public perceptions of the risks associated with nuclear power and the disposal of hazardous chemical wastes

  10. Matlab and C programming for Trefftz finite element methods

    CERN Document Server

    Qin, Qing-Hua

    2008-01-01

    Although the Trefftz finite element method (FEM) has become a powerful computational tool in the analysis of plane elasticity, thin and thick plate bending, Poisson's equation, heat conduction, and piezoelectric materials, there are few books that offer a comprehensive computer programming treatment of the subject. Collecting results scattered in the literature, MATLAB® and C Programming for Trefftz Finite Element Methods provides the detailed MATLAB® and C programming processes in applications of the Trefftz FEM to potential and elastic problems. The book begins with an introduction to th

  11. Nuclear reactor trip system

    International Nuclear Information System (INIS)

    Cook, B.M.

    1982-01-01

    Each parameter of the processes of a nuclear reactor and components operatively associated with it is monitored by a set of four like sensors. A trip system normally operates on a ''two out four'' configuration; i.e., to trip the reactor it is necessary that at least two sensors of a set sense an off-normal parameter. This assumes that all sensors are in normal operating condition. However, when a sensor is in test or is subject to maintenance or is defective or disabled, the ''two out of four''configuration would be reduced to a ''one out of three'' configuration because the affected sensor is taken out of service. This would expose the system to the possibility that a single sensor failure, which may be spurious, will cause a trip of the reactor. To prevent this, it is necessary that the affected sensor be bypassed. If only one sensor is bypassed, the system operates on a ''two out of three'' configuration. With two sensors bypassed, the sensing of an off-normal parameter by a third sensor trips the reactor. The by-pass circuit also disables the circuit coupling the by-passed sensor to the trip circuit. (author)

  12. Reinforced flexural elements for TEMP-STRESS Program

    International Nuclear Information System (INIS)

    Marchertas, A.H.; Kennedy, J.M.; Pfeiffer, P.A.

    1987-06-01

    The implementation of reinforced flexural elements into the thermal-mechanical finite element program TEMP-STRESS is described. With explicit temporal integration and dynamic relaxation capabilities in the program, the flexural elements provide an efficient method for the treatment of reinforced structures subjected to transient and static loads. The capability of the computer program is illustrated by the solution of several examples: the simulation of a reinforced concrete beam; simulations of a reinforced concrete containment shell which is subjected to internal pressurization, thermal gradients through the walls, and transient pressure loads. The results of this analysis are relevant in the structural design/safety evaluations of typical reactor containment structures. 22 refs., 13 figs

  13. Guam Commercial Purchases (Trip Ticket)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — DAWR collects Trip Ticket or purchase invoice data from vendors that buy fish directly from the fishermen. Similar to the trip ticket system in Saipan, this is a...

  14. Repetitive elements dynamics in cell identity programming, maintenance and disease

    KAUST Repository

    Bodega, Beatrice

    2014-12-01

    The days of \\'junk DNA\\' seem to be over. The rapid progress of genomics technologies has been unveiling unexpected mechanisms by which repetitive DNA and in particular transposable elements (TEs) have evolved, becoming key issues in understanding genome structure and function. Indeed, rather than \\'parasites\\', recent findings strongly suggest that TEs may have a positive function by contributing to tissue specific transcriptional programs, in particular as enhancer-like elements and/or modules for regulation of higher order chromatin structure. Further, it appears that during development and aging genomes experience several waves of TEs activation, and this contributes to individual genome shaping during lifetime. Interestingly, TEs activity is major target of epigenomic regulation. These findings are shedding new light on the genome-phenotype relationship and set the premises to help to explain complex disease manifestation, as consequence of TEs activity deregulation.

  15. NASA'S Water Resources Element Within the Applied Sciences Program

    Science.gov (United States)

    Toll, David; Doorn, Bradley; Engman, Edwin

    2010-01-01

    The NASA Applied Sciences Program works within NASA Earth sciences to leverage investment of satellite and information systems to increase the benefits to society through the widest practical use of NASA research results. Such observations provide a huge volume of valuable data in both near-real-time and extended back nearly 50 years about the Earth's land surface conditions such as land cover type, vegetation type and health, precipitation, snow, soil moisture, and water levels and radiation. Observations of this type combined with models and analysis enable satellite-based assessment of numerous water resources management activities. The primary goal of the Earth Science Applied Science Program is to improve future and current operational systems by infusing them with scientific knowledge of the Earth system gained through space-based observation, model results, and development and deployment of enabling technologies, systems, and capabilities. Water resources is one of eight elements in the Applied Sciences Program and it addresses concerns and decision making related to water quantity and water quality. With increasing population pressure and water usage coupled with climate variability and change, water issues are being reported by numerous groups as the most critical environmental problems facing us in the 21st century. Competitive uses and the prevalence of river basins and aquifers that extend across boundaries engender political tensions between communities, stakeholders and countries. Mitigating these conflicts and meeting water demands requires using existing resources more efficiently. The potential crises and conflicts arise when water is competed among multiple uses. For example, urban areas, environmental and recreational uses, agriculture, and energy production compete for scarce resources, not only in the Western U.S. but throughout much of the U.S. but also in many parts of the world. In addition to water availability issues, water quality related

  16. Documentation of SPECTROM-55: A finite element thermohydrogeological analysis program

    International Nuclear Information System (INIS)

    Osnes, J.D.; Ratigan, J.L.; Loken, M.C.; Parrish, D.K.

    1985-12-01

    SPECTROM-55 is a finite element computer program developed by RE/SPEC Inc. for analyses of coupled heat and fluid transfer through fully saturated porous media. The theoretical basis for the mathematical model, the implementation of the mathematical model into the computer code, the verification and validation efforts with the computer code, and the code support and continuing documentation are described in this document. The program is especially suited for analyses of the regional hydrogeology in the vicinity of a heat-generating nuclear waste repository. These applications typically involve forced and free convection in a ground-water flow system. The program provides transient or steady-state temperatures, pressures, and fluid velocities resulting from the application of a variety of initial and boundary conditions to bodies with complicated shapes. The boundary conditions include constant heat and fluid fluxes, convective heat transfer, constant temperature, and constant pressure. Initial temperatures and pressures can be specified. Composite systems of anisotropic materials, such as geologic strata, can be defined in either planar or axisymmetric configurations. Constant or varying volumetric heat generation, such as decaying heat generation from radioactive waste, can be specified

  17. Installation of a second trip system

    International Nuclear Information System (INIS)

    Bessada, E.

    1997-01-01

    Since its first criticality in 1957, the NRU reactor has been operating safely and efficiently supporting the CANDU reactor's research and development programs and producing radioisotopes for medical use. To ensure that the reactor continues to operate safely and effectively, Atomic Energy of Canada Limited (AECL) commissioned a team in 1989 to conduct a systematic review and assessment of the reactor condition. The outcome of the study indicated that the overall condition of the reactor is good and that it is being operated safely. The study also produced recommendations as to where safety can be improved. These recommendations are the basis of the upgrade program currently being implemented in the reactor. The Second Trip System (STS) is part of the upgrade program. It is a stand alone seismically qualified trip system that operates independently from the existing first trip system (FST) to shutdown the reactor. This paper discusses the design, installation and the inactive commissioning of the system, and the process used to ensure that the system can be retrofitted to the reactor without affecting its safety or its operational requirements. (author)

  18. Application of viscoplastic constitutive equations in finite element programs

    International Nuclear Information System (INIS)

    Hornberger, K.; Stamm, H.

    1987-04-01

    The general mathematical formulation of frequently used viscoplastic constitutive equations is explained and Robinson's model is discussed in more detail. The implementation of viscoplastic constitutive equations into Finite Element programs (such as ABAQUS) is described using Robinson's model as an example. For the numerical integration both an explicit (explicit Euler) and an implicit (generalized midpoint rule) integration scheme is utilized in combination with a time step control strategy. In the implicit integration scheme, convergence in solving a system of nonlinear algebraic equation is improved introducing a projection method. The efficiency of the implemented procedures is demonstrated for different homogeneous load cases as well as for creep loading and strain controlled cyclic loading of a perforated plate. (orig./HP) [de

  19. Basic elements for breast screening programs for Rwanda

    International Nuclear Information System (INIS)

    Abenanye, Emmanuel

    2015-02-01

    Mammography refers to the X-ray examination of the human breast, and is considered the single most important diagnostic tool in the early detection of breast cancer, which is by far the most common cancer among women. There is good evidence from clinical trials, that mammographic screening can reduce the breast cancer mortality with about 30%. The side effects include a small and age related risk of carcinogenesis due to the exposure of the glandular tissues in the breast to ionizing radiation. As for all X-ray examinations, and of special importance when investigating large populations of asymptomatic women, the relationship between radiation risk and diagnostic accuracy in mammography must be optimized. The overall objective of this thesis was to investigate and improve methods for average glandular dose (AGD) and image quality evaluation in mammography and provide some practical guidance. To assess the behavioral factors influencing breast screening the best set up of the mammography unit as well as equipment construction and the skills of people operating the machines in terms of the radiation protection screening programs. There has been doubts about the efficiency of so called service screening, i.e. routine screening programs (Sjonell and Stahle, 1999), but there is evidence suggesting a reduction of breast cancer mortality similar to that observed in the randomised trials (Duffy et al. 2002). However no study has been carried out in Rwanda of this nature to see what are the basic breast screening elements and behavioral elements that influence it. Therefore, the factors that influence women's mammography screening behavior is an important issue to be uncovered, in order to facilitate the understanding of such a behavior. This report sets out to investigate the factors that influence participation in mammography screening in Rwanda. Such an investigation aims to raise the awareness of health care providers of the factors that influence Rwanda's women

  20. Effectiveness and Successful Program Elements of SOAR’s Afterschool Programs

    Directory of Open Access Journals (Sweden)

    Janet L. Johnson

    2007-03-01

    Full Text Available Project SOAR provided after-school programs that afforded expanded learning opportunities to help students succeed in local public schools and to contribute to the general welfare of the community. Program components focused on building students’ academic skills and positive attitudes, aided by teachers, mentors, parent education, and local agencies. Instructional programs were conducted to help reduce drug use and violence. Activities included academic assistance, technology training, mentoring, service learning projects, and education in life skills and the arts. Parent involvement was encouraged. Behavioral and academic outcomes—especially at the high school level—were analyzed to determine program effectiveness regarding academic achievement, dropout rates, and rates and frequency of suspensions. Successful program elements and strategies are noted.

  1. Addressing legal and political barriers to global pharmaceutical access: options for remedying the impact of the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) and the imposition of TRIPS-plus standards.

    Science.gov (United States)

    Cohen-Kohler, Jillian Clare; Forman, Lisa; Lipkus, Nathaniel

    2008-07-01

    Despite myriad programs aimed at increasing access to essential medicines in the developing world, the global drug gap persists. This paper focuses on the major legal and political constraints preventing implementation of coordinated global policy solutions - particularly, the Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) and bilateral and regional free trade agreements. We argue that several policy and research routes should be taken to mitigate the restrictive impact of TRIPS and TRIPS-plus rules, including greater use of TRIPS flexibilities, advancement of human rights, and an ethical framework for essential medicines distribution, and a broader campaign that debates the legitimacy of TRIPS and TRIPS-plus standards themselves.

  2. CNMI Commercial Purchases (Trip Ticket)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Commonwealth of Northern Mariana Islands (CNMI), Division of Fish and Wildlife (DFW) collects 'Trip Ticket' or purchase invoice data from vendors that buy fish...

  3. Make My Trip Count 2015

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Make My Trip Count (MMTC) commuter survey, conducted in September and October 2015 by GBA, the Pittsburgh 2030 District, and 10 other regional transportation...

  4. EURCYL. A program to generate finite element meshes for pressure vessel nozzles

    International Nuclear Information System (INIS)

    De Windt, P.; Reynen, J.

    1974-12-01

    EURCYL is a program dealing with the automatic generation of finite element meshes for pressure vessel nozzles, using isoparametric elements with 8, 20 or 32 nodes. Options exist to generate BWR nozzles as well as PWR nozzles

  5. Determination of the burn-up of TRIGA fuel elements by calculation with new TRIGLAV program

    International Nuclear Information System (INIS)

    Zagar, T.; Ravnik, M.

    1996-01-01

    The results of fuel element burn-up calculations with new TRIGLAV program are presented. TRIGLAV program uses two dimensional model. Results of calculation are compared to results calculated with program, which uses one dimensional model. The results of fuel element burn-up measurements with reactivity method are presented and compared with the calculated results. (author)

  6. Managing the effect of TRIPS on availability of priority vaccines.

    Science.gov (United States)

    Milstien, Julie; Kaddar, Miloud

    2006-05-01

    The stated purpose of intellectual property protection is to stimulate innovation. The Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS) requires all Members of the World Trade Organization (WTO) to enact national laws conferring minimum standards of intellectual property protection by certain deadlines. Critics of the Agreement fear that such action is inconsistent with ensuring access to medicines in the developing world. A WHO convened meeting on intellectual property rights and vaccines in developing countries, on which this paper is based, found no evidence that TRIPS has stimulated innovation in developing market vaccine development (where markets are weak) or that protection of intellectual property rights has had a negative effect on access to vaccines. However, access to future vaccines in the developing world could be threatened by compliance with TRIPS. The management of such threats requires adherence of all countries to the Doha Declaration on TRIPS, and the protections guaranteed by the Agreement itself, vigilance on TRIPS-plus elements of free trade agreements, developing frameworks for licensing and technology transfer, and promoting innovative vaccine development in developing countries. The role of international organizations in defining best practices, dissemination of information, and monitoring TRIPS impact will be crucial to ensuring optimal access to priority new vaccines for the developing world.

  7. Regulatable elements in the high-level waste management program

    International Nuclear Information System (INIS)

    Oakley, D.

    1979-01-01

    Regulatable elements of a deep geological nuclear waste isolation system are those characteristics of a candidate system which need to be specified to achieve control of its performance. This report identifies the regulatable elements with respect to waste form, repository design, site suitability, and the modeling and decision analysis processes. Regulatable elements in each section are listed and described briefly as they affect the short-term and long-term performance of a deep geological repository

  8. Plane stress analysis of wood members using isoparametric finite elements, a computer program

    Science.gov (United States)

    Gary D. Gerhardt

    1983-01-01

    A finite element program is presented which computes displacements, strains, and stresses in wood members of arbitrary shape which are subjected to plane strain/stressloading conditions. This report extends a program developed by R. L. Taylor in 1977, by adding both the cubic isoparametric finite element and the capability to analyze nonisotropic materials. The...

  9. 01010000 01001100 01000001 01011001: Play Elements in Computer Programming

    Science.gov (United States)

    Breslin, Samantha

    2013-01-01

    This article explores the role of play in human interaction with computers in the context of computer programming. The author considers many facets of programming including the literary practice of coding, the abstract design of programs, and more mundane activities such as testing, debugging, and hacking. She discusses how these incorporate the…

  10. A computer program for structural analysis of fuel elements

    International Nuclear Information System (INIS)

    Hayashi, I.M.V.; Perrotta, J.A.

    1988-01-01

    It's presented the code ELCOM for the matrix analysis of tubular structures coupled by rigid spacers, typical of PWR's fuel elements. The code ELCOM makes a static structural analysis, where the displacements and internal forces are obtained for each structure at the joints with the spacers, and also, the natural frequencies and vibrational modes of an equivalent integrated structure are obtained. The ELCOM result is compared to a PWR fuel element structural analysis obtained in published paper. (author) [pt

  11. Tripping up the perfect

    DEFF Research Database (Denmark)

    Pedersen, Peder Holm

    2009-01-01

    In mid-2008 the editor of Turbulens.net Peder Holm-Pedersen brought together film director and author Jørgen Leth and Sverre Raffnsøe, Professor of Philosophy at the Copenhagen Business School and head of the research program Management of Self- Management, to talk about rules, freedom...

  12. PLANS; a finite element program for nonlinear analysis of structures. Volume 2: User's manual

    Science.gov (United States)

    Pifko, A.; Armen, H., Jr.; Levy, A.; Levine, H.

    1977-01-01

    The PLANS system, rather than being one comprehensive computer program, is a collection of finite element programs used for the nonlinear analysis of structures. This collection of programs evolved and is based on the organizational philosophy in which classes of analyses are treated individually based on the physical problem class to be analyzed. Each of the independent finite element computer programs of PLANS, with an associated element library, can be individually loaded and used to solve the problem class of interest. A number of programs have been developed for material nonlinear behavior alone and for combined geometric and material nonlinear behavior. The usage, capabilities, and element libraries of the current programs include: (1) plastic analysis of built-up structures where bending and membrane effects are significant, (2) three dimensional elastic-plastic analysis, (3) plastic analysis of bodies of revolution, and (4) material and geometric nonlinear analysis of built-up structures.

  13. Radiation Monitoring - A Key Element in a Nuclear Power Program

    International Nuclear Information System (INIS)

    Hussein, A.S.; El-dally, T.A.

    2008-01-01

    For a nuclear power plant, radiation is especially of great concern to the public and the environment. Therefore, a radiation monitoring program is becoming a critical importance. This program covers all phases of the nuclear plant including preoperational, normal operation, accident and decommissioning. The fundamental objective of radiation monitoring program is to ensure that the health and safety of public inside and around the plant and to confirm the radiation doses are below the dose limits for workers and the public. This paper summarizes the environmental radiation monitoring program for a nuclear power plant

  14. Field Trips and the Law.

    Science.gov (United States)

    Troy, Thomas D.; Schwaab, Karl E.

    1981-01-01

    Legal aspects of field trips are addressed, with special attention on planning and implementation aspects which warrant legal consideration. Suggestions are based on information obtained from studies which reviewed and analyzed court cases, with recommendations geared to lessen the likelihood that negligence suits will result if students sustain…

  15. RETRAN analysis of San Onofre Unit 2 turbine trip from 100% power

    International Nuclear Information System (INIS)

    Ting, Y.P.

    1985-01-01

    During the San Onofre Nuclear Generating Station Unit (SONGS 2) startup test, the plant experienced a turbine trip from 100% power on June 16, 1983. The trip was initiated by the condenser pressure switch malfunctioning. The plant computers were operating and recorded many plant key parameters. The resulting trip behaved as if it has been manually initiated and it was considered equivalent to a preplanned turbine trip test. A RETRAN-02 model was developed to simulate the SONGS 2 June 16 turbine trip event. The RETRAN analysis of the trip is a continuing effort of in-house SONGS 2 RETRAN model development to benchmark the calculations against the plant startup test data. The overall agreement between measured data and the RETRAN calculations was very good, providing confidence in the capability of the model and the RETRAN program. Comparative data are presented

  16. NACHOS: a finite element computer program for incompressible flow problems. Part I. Theoretical background

    International Nuclear Information System (INIS)

    Gartling, D.K.

    1978-04-01

    The theoretical background for the finite element computer program, NACHOS, is presented in detail. The NACHOS code is designed for the two-dimensional analysis of viscous incompressible fluid flows, including the effects of heat transfer. A general description of the fluid/thermal boundary value problems treated by the program is described. The finite element method and the associated numerical methods used in the NACHOS code are also presented. Instructions for use of the program are documented in SAND77-1334

  17. Trip generation and data analysis study.

    Science.gov (United States)

    2015-09-01

    Through the Trip Generation and Data Analysis Study, the District of Columbia Department of : Transportation (DDOT) is undertaking research to better understand multimodal urban trip generation : at mixed-use sites in the District. The study is helpi...

  18. Trip generation characteristics of special generators

    Science.gov (United States)

    2010-03-01

    Special generators are introduced in the sequential four-step modeling procedure to represent certain types of facilities whose trip generation characteristics are not fully captured by the standard trip generation module. They are also used in the t...

  19. Common elements of adolescent prevention programs: minimizing burden while maximizing reach.

    Science.gov (United States)

    Boustani, Maya M; Frazier, Stacy L; Becker, Kimberly D; Bechor, Michele; Dinizulu, Sonya M; Hedemann, Erin R; Ogle, Robert R; Pasalich, Dave S

    2015-03-01

    A growing number of evidence-based youth prevention programs are available, but challenges related to dissemination and implementation limit their reach and impact. The current review identifies common elements across evidence-based prevention programs focused on the promotion of health-related outcomes in adolescents. We reviewed and coded descriptions of the programs for common practice and instructional elements. Problem-solving emerged as the most common practice element, followed by communication skills, and insight building. Psychoeducation, modeling, and role play emerged as the most common instructional elements. In light of significant comorbidity in poor outcomes for youth, and corresponding overlap in their underlying skills deficits, we propose that synthesizing the prevention literature using a common elements approach has the potential to yield novel information and inform prevention programming to minimize burden and maximize reach and impact for youth.

  20. Current Practices for Providing School Field Trip Meals: Perspectives of School Nutrition Managers and Teachers

    Science.gov (United States)

    Sneed, Jeannie; Vaterlaus Patten, Emily

    2015-01-01

    Purpose/Objectives: The Healthy, Hunger Free Kids Act of 2010 extended the requirements for a school food safety program to wherever food is stored, prepared, or served, including meals for field trips. The purpose of this study was to determine what foods are used for field trip meals, how those foods are transported and stored, and what standard…

  1. Trip optimization system and method for a train

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Ajith Kuttannair; Shaffer, Glenn Robert; Houpt, Paul Kenneth; Movsichoff, Bernardo Adrian; Chan, David So Keung

    2017-08-15

    A system for operating a train having one or more locomotive consists with each locomotive consist comprising one or more locomotives, the system including a locator element to determine a location of the train, a track characterization element to provide information about a track, a sensor for measuring an operating condition of the locomotive consist, a processor operable to receive information from the locator element, the track characterizing element, and the sensor, and an algorithm embodied within the processor having access to the information to create a trip plan that optimizes performance of the locomotive consist in accordance with one or more operational criteria for the train.

  2. Trip internalization in multi-use developments.

    Science.gov (United States)

    2014-04-01

    Internal trip capture refers to how the number trips to and from a development are reduced by the proximity of : complementary land uses within the development (e.g., residential to retail). Internal trips occur within the : development and do not en...

  3. COYOTE: a finite element computer program for nonlinear heat conduction problems

    International Nuclear Information System (INIS)

    Gartling, D.K.

    1978-06-01

    COYOTE is a finite element computer program designed for the solution of two-dimensional, nonlinear heat conduction problems. The theoretical and mathematical basis used to develop the code is described. Program capabilities and complete user instructions are presented. Several example problems are described in detail to demonstrate the use of the program

  4. Reactor trip on turbine trip inhibit control system for nuclear power generating system

    International Nuclear Information System (INIS)

    Torres, J.M.; Musick, C.R.

    1976-01-01

    A reactor trip on turbine trip inhibit control system for a nuclear power generating system which utilizes steam bypass valves is described. The control system inhibits a normally automatic reactor trip on turbine trip when the bypass valves have the capability of bypassing enough steam to prevent reactor trip limits from being reached and/or to prevent opening of the secondary safety pressure valves. The control system generates a bypass valve capability signal which is continuously compared with the reactor power. If the capability is greater than the reactor power, then an inhibit signal is generated which prevents a turbine trip signal from tripping the nuclear reactor. 10 claims, 4 figures

  5. The Goat Portage: Students' Stories and Learning from Canoe Trips.

    Science.gov (United States)

    Horwood, Bert

    This study explores how high school students learn from their experiences in an extracurricular adventure program and illustrates how students' narrative inquiries relate to experiential learning. Twelve canoe trips were studied by participant observation methods. Data were collected from recorded interviews with students and staff, field notes,…

  6. Retran simulation of Oyster Creek generator trip startup test

    International Nuclear Information System (INIS)

    Alammar, M.A.

    1987-01-01

    RETRAN simulation of Oyster Creek generator trip startup test was carried out as part of Oyster Creek RETRAN model qualification program for reload licensing applications. The objective of the simulation was to qualify the turbine model and its interface with the control valve and bypass systems under severe transients. The test was carried out by opening the main breakers at rated power. The turbine speed governor closed the control valves and the pressure regulator opened the bypass valves within 0.5 sec. The stop valves closed by a no-load turbine trip, before the 10 percent overspeed trip was reached and the reactor scrammed on high APRM neutron flux. The simulation resulted in qualifying a normalized hydraulic torque for the turbine model and a 0.3 sec, delay block for the bypass model to account for the different delays in the hydraulic linkages present in the system. One-dimensional kinetics was used in this simulation

  7. The finite element analysis program MSC Marc/Mentat a first introduction

    CERN Document Server

    Öchsner, Andreas

    2016-01-01

    Based on simple examples, this book offers a short introduction to the general-purpose finite element program MSC Marc, a specialized program for non-linear problems (implicit solver) distributed by the MSC Software Corporation, which is commonly used in academia and industry. Today the documentation of all finite element programs includes a variety of step-by-step examples of differing complexity, and in addition, all software companies offer professional workshops on different topics. As such, rather than competing with these, the book focuses on providing simple examples, often single-element problems, which can easily be related to the theory that is discussed in finite element lectures. This makes it an ideal companion book to classical introductory courses on the finite element method.

  8. Critical Elements of Student Assistance Programs: A Qualitative Study

    Science.gov (United States)

    Torres-Rodriguez, Leslie; Beyard, Karen; Goldstein, Marc B.

    2010-01-01

    Student assistance programs (SAPs) are one approach for using teams to respond to student needs, but there is little research on SAP implementation and whether SAPs function as intended. The authors present findings from a study of two SAPs that use a model developed by Connecticut's Governor's Prevention Partnership. The study focused on…

  9. Defining the Benefits, Outputs, and Knowledge Elements of Program Evaluation.

    Science.gov (United States)

    Zorzi, Rochelle; Perrin, Burt; McGuire, Martha; Long, Bud; Lee, Linda

    2002-01-01

    The Canadian Evaluation Society explored the benefits that can be attributed to program evaluation, the outputs necessary to achieve those benefits, and the knowledge and skills needed to produce outputs. Findings, which articulate benefits, outputs, and skills, can be used by evaluation organizations to support advocacy and professional…

  10. Snakes Have Feelings, Too: Elements of a Camp Snake Program.

    Science.gov (United States)

    Allen, Robert Ross

    2001-01-01

    A camp snake program can help campers overcome their fear of snakes, and people cannot truly enjoy nature when they carry a phobia about any one part of it. It can also help overcome prejudice by teaching truth and respect, instilling compassion, and helping campers develop empathy. Advice on catching, handling, identifying, keeping, and feeding…

  11. Power supply trip control for nuclear reactor

    International Nuclear Information System (INIS)

    Hager, R.E.; Gutman, Jerzy.

    1987-01-01

    A control system for a trip coil in a switchgear mechanism controls the supply of electrical power to a process control device and ensures de-energization of the trip coil shortly after the trip coil is energized. The trip coil is energized not by an independent dc source as in prior art, but from rectified power from a step down transformer supplied from the switchgear output side. The transformer feeds a rectifier which is connected to the trip coil via a trip activation device. The output of the rectifier can be monitored using an optical converter to determine the ability of the control system to activate the trip coil and the condition of the power supplied to the process control device. The control device may be a rod positioner in a pressurised water nuclear reactor. (author)

  12. The Study Abroad Experience: A Crucial Element in Globalizing Business School Programs

    Science.gov (United States)

    Mangiero, George A.; Kraten, Michael

    2011-01-01

    Globalization is a fundamental reality of modern business practice. Participation in a study abroad program is a crucial element in helping students become well rounded global business leaders; it is an increasingly important element of a well rounded business curriculum. A semester or summer abroad, properly conceived and designed, can provide…

  13. Surveying the elements of successful infrared predictive maintenance programs

    Science.gov (United States)

    Snell, John R., Jr.; Spring, Robert W.

    1991-03-01

    This paper summarizes the results of a survey of over three hundred maintenance personnel who use imaging equipment within their company or organization. All had previously participated in one or more of our training programs. The companies took in a broad range of industry, including, among other, power generation, pulp and paper, metals, mining, petrochemical, automotive and general manufacturing. The organizations were mainly quite large, either commercial or public, and included governmental agencies, military, colleges and universities, municipalities, and utilities. Although we had a very tight time line for the survey, we were pleased to have a 15% response rate. The results show that some of the causes of success and failure in infrared programs are not unlike those associated with any type of program in an organizational structure, i.e. the need for accurate and timely communications; justification requirements; etc. Another set of problems was shared more closely with other startup maintenance technologies (for example, vibration monitoring), such as the need for trending data; providing appropriate technical training; achieving reproducible results; etc. Finally, some of the driving mechanisms are more specific to this technology, such as re-designing equipment so that it can be thermally inspected; establishing effective documentation strategies; etc.

  14. Human Research Program: Space Human Factors and Habitability Element

    Science.gov (United States)

    Russo, Dane M.

    2007-01-01

    The three project areas of the Space Human Factors and Habitability Element work together to achieve a working and living environment that will keep crews healthy, safe, and productive throughout all missions -- from Earth orbit to Mars expeditions. The Advanced Environmental Health (AEH) Project develops and evaluates advanced habitability systems and establishes requirements and health standards for exploration missions. The Space Human Factors Engineering (SHFE) Project s goal is to ensure a safe and productive environment for humans in space. With missions using new technologies at an ever-increasing rate, it is imperative that these advances enhance crew performance without increasing stress or risk. The ultimate goal of Advanced Food Technology (AFT) Project is to develop and deliver technologies for human centered spacecraft that will support crews on missions to the moon, Mars, and beyond.

  15. Evidence, explanations, and recommendations for teachers' field trip strategies

    Science.gov (United States)

    Rebar, Bryan

    Field trips are well recognized by researchers as an educational approach with the potential to complement and enhance classroom science teaching by exposing students to unique activities, resources, and content in informal settings. The following investigation addresses teachers' field trip practices in three related manuscripts: (1) A study examining the details of teachers' pedagogical strategies intended to facilitate connections between students' experiences and the school curricula while visiting an aquarium; (2) A study documenting and describing sources of knowledge that teachers draw from when leading field trips to an aquarium; (3) A position paper that reviews and summarizes research on effective pedagogical strategies for field trips. Together these three pieces address key questions regarding teachers' practices on field trips: (1) What strategies are teachers employing (and not employing) during self-guided field trips to facilitate learning tied to the class curriculum? (2) What sources of knowledge do teachers utilize when leading field trips? (3) How can teachers be better prepared to lead trips that promote learning? The Oregon Coast Aquarium served as the field trip site for teachers included in this study. The setting suited these questions because the aquarium serves tens of thousands of students on field trips each year but provides no targeted programming for these students as they explore the exhibits. In other words, the teachers who lead field trips assume much of the responsibility for facilitating students' experience. In order to describe and characterize teachers' strategies to link students' experiences to the curriculum, a number of teachers (26) were observed as they led their students' visit to the public spaces of the aquarium. Artifacts, such as worksheets, used during the visit were collected for analysis as well. Subsequently, all teachers were surveyed regarding their use of the field trip and their sources of knowledge for

  16. User's Manual for SPECTROM-41: a Finite-Element Heat Transfer Program

    International Nuclear Information System (INIS)

    Svalstad, D.K.

    1983-06-01

    This User's Manual addresses SPECTROM-41: A Finite Element Heat Transfer Computer Program. The user is introduced to the program's capabilities and operation, with required user input outlined in detail. Example problems are included to illustrate the use of the various program features, and included to illustrate the use of the various program features, and analytical solutions are presented for four of the examples to provide a measure of program accuracy. Past and ongoing comparative benchmark analyses are highlighted to provide the user with an indication of how SPECTROM-41 predictions compare with other available heat transfer programs

  17. Implementation of the utilization program for the fuel elements of the Atucha I nuclear power plant

    International Nuclear Information System (INIS)

    Martin, H.R.; Serra, O.H.; Parker, Alejandro

    1981-01-01

    The programming operation for the use of the fuel elements in the Atucha-1 nuclear power plant was initially under the responsibility of the KWU Company, as part of the services rendered due for the manufacturing of said elements. This job was done with the help of the TRISIC program, developed in the early seventies by CNEA and SIEMENS staff. From april 21, 1979 on, CNEA took over the responsibility and strategy of the interchange of fuel elements. The several stages carried out for the implementation of this service are detailed. (M.E.L.) [es

  18. The driving elements of an integrated configuration management program

    International Nuclear Information System (INIS)

    Zaalouk, M.G.

    1990-01-01

    The need for an effective long term Plant Configuration Management Program (CMP) has been demonstrated in response to Plant Design Modification and Plant Life Extension activities. Having particular need are those Utilities operating early vintage nuclear plants, where numerous modifications have been made without the benefit of an accurate, complete, properly maintained and controlled Design Basis. This paper presents a model for a long term, cost effective CMP which is based on and driven by the development, maintenance and control of accurate plant Design Basis Information. The model also provides a systematic approach for devising and implementing an integrated Plant CMP based on the essential attributes of the Plant Configuration Management, including Design Basis

  19. Developing the basic elements for breast diagnostic programs In Ghana

    International Nuclear Information System (INIS)

    Antwi-Bosiako, F.

    2012-04-01

    Breast cancer is the most common cancer affecting women worldwide. Women are at an increase risk of developing both physical and psychological morbidity after diagnosis. Findings show that women who were diagnosed with breast cancer are at risk of developing several psychological morbidities such as depression, anxiety, fatigue, negative thoughts, suicidal thoughts, fear of dying, sense of aloneness, sexual and body image problems, as well as an overall decrease in the quality of life. The objective of this project is to review the available literature on breast cancer diagnostic programs in the developed world and the developing countries and develop one for Ghana. Lack of resources and basic infrastructure and data on breast cancer cases, make it difficult to have access to breast cancer screening, early diagnosis, treatment or palliative care. In all the studies reviewed, a trial population of about ten thousand women aging between 50-70 years were used for three years period. Mammography, Clinical Breast-Examination (CBE) and Breast Self-Examination (BSE) methods were used to screen the women. Assessment, biopsies and treatment of palpable screen-detected abnormalities were performed using Fine Needle aspiration (FNA) and fine needle aspiration cytology (FNAC). High-quality single medio-lateral oblique view mammography has been shown to be an effective method in reducing mortality from breast cancer and we conclude that initially this preferred option for the development of breast diagnostic program. There is no evidence that clinical breast-examination or breast self-examination is effective when used alone. These methods have some value when used in combination with mammography, but their contribution requires further assessment. From available data, and the cost involved in some trials conducted in some of the developed countries, the Ghanaian programme should be based on creation of public awareness about breast cancer disease. (author)

  20. Calculation of pressure distribution in vacuum systems using a commercial finite element program

    International Nuclear Information System (INIS)

    Howell, J.; Wehrle, B.; Jostlein, H.

    1991-01-01

    The finite element method has proven to be a very useful tool for calculating pressure distributions in complex vacuum systems. A number of finite element programs have been developed for this specific task. For those who do not have access to one of these specialized programs and do not wish to develop their own program, another option is available. Any commercial finite element program with heat transfer analysis capabilities can be used to calculate pressure distributions. The approach uses an analogy between thermal conduction and gas conduction with the quantity temperature substituted for pressure. The thermal analogies for pumps, gas loads and tube conductances are described in detail. The method is illustrated for an example vacuum system. A listing of the ANSYS data input file for this example is included. 2 refs., 4 figs., 1 tab

  1. The Relationship between a College Preparation Program and At-Risk Students' College Readiness

    Science.gov (United States)

    Cates, Jennifer T.; Schaefle, Scott E.

    2011-01-01

    This study evaluates the relationship between elements of a college preparation program and the college readiness of low-income and/or Latina/o students at the completion of 6 years of participation in the program. Hours of participation in tutoring, mentoring, advising, college campus visits, summer programs, and educational field trips are…

  2. Recommendations for Planning and Managing International Short-term Pharmacy Service Trips.

    Science.gov (United States)

    Johnson, Kalin L; Alsharif, Naser Z; Rovers, John; Connor, Sharon; White, Nicole D; Hogue, Michael D

    2017-03-25

    International pharmacy service trips by schools and colleges of pharmacy allow students to provide health care to medically underserved areas. A literature review (2000-2016) in databases and Internet searches with specific keywords or terms was performed to assess current practices to establish and maintain successful pharmacy service trips. Educational documents such as syllabi were obtained from pharmacy programs and examined. A preliminary draft was developed and authors worked on sections of interest and expertise. Considerations and current recommendations are provided for the key aspects of the home institution and the host country requirements for pharmacy service trips based on findings from a literature search and the authors' collective, extensive experience. Evaluation of the trip and ethical considerations are also discussed. This article serves as a resource for schools and colleges of pharmacy that are interested in the development of new pharmacy service trips and provides key considerations for continuous quality improvement of current or future activities.

  3. TRIP RATES FOR CONDOMINIUM CONSTRUCTION PROJECT

    Directory of Open Access Journals (Sweden)

    Wirach Hirun

    2015-01-01

    Full Text Available The number of large scale condominium construction projects had dramatically increased in Bangkok. Many projects had occurred in either densely populated areas or in central business districts, where traffic conditions were usually highly congested. To prevent traffic problems, a traffic impact study must be prepared and submitted for review by concerned public authorities. Unit trip generation rates were important data in traffic impact analysis. Without accurate unit trip generation rates, public agencies could not obtain accurate information on the traffic that will be generated. This study aimed to study trip rates and the factors affecting them for condominium construction project in Bangkok. The data were collected from 30 condominium construction sites located in 15 districts of Bangkok. The analysis used the linear regression method and was divided into three cases: 1 trip rates for all vehicles, 2 trip rates for classified vehicles, and 3 trip rates for all types of condominium. All case analyses considered weekdays, Saturday, and Sunday. The results found that trip rates related to the number of dwellings in the condominium. The trip rates for all vehicle types on weekdays, Saturday, and Sunday were 10.636, 4.647, and 9.294 vehicles per 100 dwelling units per day respectively. The trip rates for six-wheeled and ten-wheeled trucks on weekdays, Saturday, and Sunday were 2.046, 0.975, and 0.575 vehicles per 100 dwelling units per day respectively. The trip rate for four-wheeled trucks and passenger cars on weekdays was 1.960. Regarding condominium types, the trip rate for low rise condominiums for all vehicle types on weekdays was 5.315 while the trip rates for high rise condominiums for weekdays, Saturday, and Sunday were 3.965, 2.667, and 1.261 respectively.

  4. Technical evaluation of the proposed deletion of a reactor trip on a turbine trip below 50-percent power for the Beaver Valley nuclear power plant, Unit 1

    International Nuclear Information System (INIS)

    Reeves, W.E.

    1979-12-01

    This report documents the technical evaluation of the Duquesne Light Company's proposed license amendment for the deletion of a reactor trip on a turbine trip below 50% power for the Beaver Valley nuclear power plant, Unit 1. This report is supplied as part of the Selected Electrical, Instrumentation, and Control Systems Issues Program being conducted for the US Nuclear Regulatory Commission by Lawrence Livermore Laboratory

  5. Procedural Aspects of Compulsory Licensing Under TRIPS

    DEFF Research Database (Denmark)

    Wested, Jakob; Minssen, Timo

    2017-01-01

    and discussion addressed the framework and context for CL provided by the TRIPS convention. Both the specific requirements enshrined in TRIPS art 31 and the broader objectives and principles enshrined in TRIPS, e.g. transfer and dissemination of technology (art 7), protection of public health (art 8......In 2013, Indian authorities granted a compulsory license to NATCO Pharmaceuticals for a patented pharmaceutical product sold by Bayer. This decision raised several complex issues regarding the grant a CL and their consistency with the principles and objectives of TRIPS. Furthermore, in January 2017...

  6. Irradiation program of slightly enriched fuel elements at the Atucha I nuclear power plant

    International Nuclear Information System (INIS)

    Casario, J.A.; Cesario, R.H.; Perez, R.A.; Sidelnik, J.I.

    1987-01-01

    An irradiation program of fuel elements with slightly enriched uranium is implemented, tending to the homogenization of core at Atucha I nuclear power plant. The main benefits of the enrichment program are: a) to extend the average discharge burnup of fuel elements, reducing the number of elements used to generate the same amount of energy. This implies a smaller annual consumption of elements and consequently the reduction of transport and replacement operations and of the storage pool systems as well as that of radioactive wastes; b) the saving of uranium and structural materials (Zircaloy and others). In the initial stage of program an homogeneous core enrichment of 0.85% by weight of U-235 is anticipated. The average discharge burnup of fuel elements, as estimated by previous studies, is approximately 11.6 MW d/kg U. The annual consumption of fuel elements is reduced from 396 of natural uranium to 205, with a load factor of 0.85. It is intended to reach the next equilibrium steps with an enrichment of 1.00 and 1.20% in U-235. (Author)

  7. Quality-assurance study of the special - purpose finite-element program - SPECTROM: I. Thermal, thermoelastic, and viscoelastic problems

    International Nuclear Information System (INIS)

    Wagner, R.A.

    1980-12-01

    This comparison study involves a preliminary verification of finite element calculations. The methodology of the comparison study consists of solving four example problems with both the SPECTROM finite element program and the MARC-CDC general purpose finite element program. The results show close agreement for all example problems

  8. Whole-core damage analysis of EBR-II driver fuel elements following SHRT program

    International Nuclear Information System (INIS)

    Chang, L.K.; Koenig, J.F.; Porter, D.L.

    1987-01-01

    In the Shutdown Heat Removal Testing (SHRT) program in EBR-II, fuel element cladding temperatures of some driver subassemblies were predicted to exceed temperatures at which cladding breach may occur. A whole-core thermal analysis of driver subassemblies was performed to determine the cladding temperatures of fuel elemnts, and these temperatures were used for fuel element damage calculation. The accumulated cladding damage of fuel element was found to be very small and fuel element failure resulting from SHRT transients is unlikely. No element breach was noted during the SHRT transients. The reactor was immediately restarted after the most severe SHRT transient had been completed and no driver fuel breach has been noted to date. (orig.)

  9. The method and program system CABEI for adjusting consistency between natural element and its isotopes data

    Energy Technology Data Exchange (ETDEWEB)

    Tingjin, Liu; Zhengjun, Sun [Chinese Nuclear Data Center, Beijing, BJ (China)

    1996-06-01

    To meet the requirement of nuclear engineering, especially nuclear fusion reactor, now the data in the major evaluated libraries are given not only for natural element but also for its isotopes. Inconsistency between element and its isotopes data is one of the main problem in present evaluated neutron libraries. The formulas for adjusting to satisfy simultaneously the two kinds of consistent relationships were derived by means of least square method, the program system CABEI were developed. This program was tested by calculating the Fe data in CENDL-2.1. The results show that adjusted values satisfy the two kinds of consistent relationships.

  10. A finite element computer program for the calculation of the resonant frequencies of anisotropic materials

    International Nuclear Information System (INIS)

    Fleury, W.H.; Rosinger, H.E.; Ritchie, I.G.

    1975-09-01

    A set of computer programs for the calculation of the flexural and torsional resonant frequencies of rectangular section bars of materials of orthotropic or higher symmetry are described. The calculations are used in the experimental determination and verification of the elastic constants of anisotropic materials. The simple finite element technique employed separates the inertial and elastic properties of the beam element into station and field transfer matrices respectively. It includes the Timoshenko beam corrections for flexure and Lekhnitskii's theory for torsion-flexure coupling. The programs also calculate the vibration shapes and surface nodal contours or Chladni figures of the vibration modes. (author)

  11. Microstructure-based constitutive modeling of TRIP steel: Prediction of ductility and failure modes under different loading conditions

    International Nuclear Information System (INIS)

    Choi, K.S.; Liu, W.N.; Sun, X.; Khaleel, M.A.

    2009-01-01

    We study the ultimate ductility and failure modes of a commercial transformation-induced plasticity (TRIP) 800 steel under different loading conditions with an advanced microstructure-based finite-element analysis. The representative volume element (RVE) for the TRIP 800 under examination is developed based on an actual microstructure obtained from scanning electron microscopy. The ductile failure of the TRIP 800 under different loading conditions is predicted in the form of plastic strain localization without any prescribed failure criteria for the individual phases. This indicates that the microstructure-level inhomogeneity of the various constituent phases can be the key factor influencing the final ductility of the TRIP 800 steel under different loading conditions. Comparisons of the computational results with experimental measurements suggest that the microstructure-based modeling approach accurately captures the overall macroscopic behavior of the TRIP 800 steel under different loading and boundary conditions.

  12. Complementary, substitution, and independence among tourist trips

    NARCIS (Netherlands)

    Middelkoop, van M.; Borgers, A.W.J.; Timmermans, H.J.P.

    1999-01-01

    The relationship between day trips, short breaks (2-4 days), and holidays (5+ days) has never been examined at the level of the individual consumer because surveys on day and overnight trips are typically conducted independently. In this article, both the stated and the inferred relationship between

  13. A model for TRIP steel constitutive behaviour

    NARCIS (Netherlands)

    Perdahcioglu, Emin Semih; Geijselaers, Hubertus J.M.; Menari, G

    2011-01-01

    A constitutive model is developed for TRIP steel. This is a steel which contains three or four different phases in its microstructure. One of the phases in TRIP steels is metastable austenite (Retained Austenite) which transforms to martensite upon deformation. The accompanying transformation strain

  14. Investigation of the Formability of TRIP780 Steel Sheets

    Science.gov (United States)

    Song, Yang

    The formability of a metal sheet is dependent on its work hardening behaviour and its forming limits; and both aspects must be carefully determined in order to accurately simulate a particular forming process. This research aims to characterize the formability of a TRIP780 sheet steel using advanced experimental testing and analysis techniques. A series of flat rolling and tensile tests, as well as shear tests were conducted to determine the large deformation work hardening behaviour of this TRIP780 steel. Nakazima tests were carried out up to fracture to determine the forming limits of this sheet material. A highly-automated method for generating a robust FLC for sheet materials from DIC strain measurements was created with the help of finite element simulations, and evaluated against the conventional method. A correction algorithm that aims to compensate for the process dependent effects in the Nakazima test was implemented and tested with some success.

  15. Flat Plate Boundary Layer Stimulation Using Trip Wires and Hama Strips

    Science.gov (United States)

    Peguero, Charles; Henoch, Charles; Hrubes, James; Fredette, Albert; Roberts, Raymond; Huyer, Stephen

    2017-11-01

    Water tunnel experiments on a flat plate at zero angle of attack were performed to investigate the effect of single roughness elements, i.e., trip wires and Hama strips, on the transition to turbulence. Boundary layer trips are traditionally used in scale model testing to force a boundary layer to transition from laminar to turbulent flow at a single location to aid in scaling of flow characteristics. Several investigations of trip wire effects exist in the literature, but there is a dearth of information regarding the influence of Hama strips on the flat plate boundary layer. The intent of this investigation is to better understand the effects of boundary layer trips, particularly Hama strips, and to investigate the pressure-induced drag of both styles of boundary layer trips. Untripped and tripped boundary layers along a flat plate at a range of flow speeds were characterized with multiple diagnostic measurements in the NUWC/Newport 12-inch water tunnel. A wide range of Hama strip and wire trip thicknesses were used. Measurements included dye flow visualization, direct skin friction and parasitic drag force, boundary layer profiles using LDV, wall shear stress fluctuations using hot film anemometry, and streamwise pressure gradients. Test results will be compared to the CFD and boundary layer model results as well as the existing body of work. Conclusions, resulting in guidance for application of Hama strips in model scale experiments and non-dimensional predictions of pressure drag will be presented.

  16. Rare earth elements as a by-catch of sedimentary deposits. Exploration program of rare earth elements; Selten Erd Elemente als Beifang sedimentaerer Lagerstaetten. Erkundungsprogramm Selten Erd Elemente

    Energy Technology Data Exchange (ETDEWEB)

    Linhardt, E.; Gebhardt, A. (comps.)

    2014-02-15

    The increasing demand for rare earth elements (REE) in the field of ''green technologies'' on the one hand and the shortage of raw materials on the world markets on the other hand confronted also Bavaria as an industrial location with growing supply problems in these ''high tech raw materials''. The aim of exploration was the clarification of the feedstock REE potential of heavy mineral concentrates which are obtained in the industrial extraction and processing of sand and kaolin in existing extraction operations in northern Bavaria as by catch and are potentially winnable or marketable. The in-depth investigation enabled the potential of found rare earth elements and other high-tech metal oxides that can be classified as very likely find it in terms of an economic recovery. [German] Der zunehmende Bedarf an Selten Erd Elementen (SEE) im Bereich der ''Gruenen Technologien'' zum Einen sowie die Rohstoffverknappung auf den Weltmaerkten zum Anderen konfrontiert auch Bayern als Industriestandort mit wachsenden Versorgungsproblemen bei diesen ''high tech-Grundstoffen''. Ziel der Erkundung war die Klaerung des rohstofflichen SEE-Potenzials von Schwermineralkonzentraten, die bei der grosstechnischen Gewinnung und Aufbereitung von Sand und Kaolin in vorhandenen Gewinnungsbetrieben Nordbayerns als Beifang anfallen und potenziell gewinn- bzw. vermarktbar sind. Im Zuge der Untersuchung konnten nutzbare Potenziale von Selten Erd Elementen und anderen high-tech - Metalloxiden gefunden werden, die sehr wahrscheinlich als fuendig im Hinblick auf eine wirtschaftliche Gewinnung eingestuft werden koennen.

  17. Improving plant availability by predicting reactor trips

    International Nuclear Information System (INIS)

    Frank, M.V.; Epstein, S.A.

    1986-01-01

    Management Ahnalysis Company (MAC) has developed and applied two complementary software packages called RiTSE and RAMSES. Together they provide an mini-computer workstation for maintenance and operations personnel to dramatically reduce inadvertent reactor trips. They are intended to be used by those responsible at the plant for authorizing work during operation (such as a clearance coordinator or shift foreman in U.S. plants). They discover and represent all components, processes, and their interactions that could case a trip. They predict if future activities at the plant would cause a reactor trip, provide a reactor trip warning system and aid in post-trip cause analysis. RAMSES is a general reliability engineering software package that uses concepts of artificial intelligence to provide unique capabilities on personal and mini-computers

  18. Cyltran: finite element programs for flow and mass transport under cylindrically symmetric conditions

    International Nuclear Information System (INIS)

    Noy, D.J.

    1984-11-01

    A group of finite element programs are described which may be used for the analysis of complex single borehole hydraulic and tracer experiments in porous media. An outline is given of the theoretical development of the model and the computational procedures used. The equations are solved with the aid of routines specifically designed for efficient operation on vector processing machines. Finally, two simple examples of output generated by the programs are given. (author)

  19. Sensitivity Analysis of Dousing Spray Trip on Radioactive Release in Pressure Tube Rupture Accident with Both End Fitting Failures

    Energy Technology Data Exchange (ETDEWEB)

    Jang, M. S.; Kang, H. S; Kim, S. R. [NESS, Daejeon (Korea, Republic of)

    2015-10-15

    We analyzed the sensitivity analysis of dousing spray trip conditions on radioactive release. In terms of conservativeness, the set 1 trip would be more appropriate in RR analysis than set 2 trip, which is the general condition of RR analysis. Radioactive releases from the containment building is related to containment air pressure, which increases by the coolant discharge from loss of coolant accident and the actuation conditions of dousing spray and so on. In LOCA analysis, the dousing spray trip conditions are set for the analysis objectives; for peak pressure (PP), for pressure signal (PS), for radioactive release (RR) and etc. In RR analysis, we would determine the dousing spray trip condition to increase radioactive release to the public for conservatism. Therefore, we carried out the sensitivity analysis of dousing spray trip condition on radioactive release from containment building using GOTHIC and SMART program for CANDU.

  20. Short-term service trips and the interprofessional team: a perspective from Honduras.

    Science.gov (United States)

    VanderWielen, Lynn M; Halder, Gabriela E; Enurah, Alexander S; Pearson, Catherine; Stevens, Michael P; Crossman, Steven H

    2015-03-01

    Short-term service trips from the USA annually spend over $250 million dollars to provide healthcare to individuals in developing nations. These trips often uniquely define goals as related to changes in the host population and overlook the valuable benefits potentially incurred by the trip volunteers. The Honduras Outreach Medical Brigada Relief Effort utilizes an interprofessional team approach to develop the dual goals of improving health and quality of life in host communities and improving interprofessional teamwork values and skills among participants. This article outlines details of this program, describes on-going evaluation work and discusses the interprofessional implications from this project.

  1. Workplace Violence Training Programs for Health Care Workers: An Analysis of Program Elements.

    Science.gov (United States)

    Arbury, Sheila; Hodgson, Michael; Zankowski, Donna; Lipscomb, Jane

    2017-06-01

    Commercial workplace violence (WPV) prevention training programs differ in their approach to violence prevention and the content they present. This study reviews 12 such programs using criteria developed from training topics in the Occupational Safety and Health Administration's (OSHA) Guidelines for Preventing Workplace Violence for Healthcare and Social Service Workers and a review of the WPV literature. None of the training programs addressed all the review criteria. The most significant gap in content was the lack of attention to facility-specific risk assessment and policies. To fill this gap, health care facilities should supplement purchased training programs with specific training in organizational policies and procedures, emergency action plans, communication, facility risk assessment, and employee post-incident debriefing and monitoring. Critical to success is a dedicated program manager who understands risk assessment, facility clinical operations, and program management and evaluation.

  2. Acquisition Program Transition Workshops: An Element of the DSMC Program Manager Mission Assistance Capability

    Science.gov (United States)

    2011-10-01

    specific modules as needed. The term “startup” is inclusive of any point in a DoD acquisition program. As noted above, methodology for conducting...Acquisition Sustainment =Decision Point =Milestone Review =Decision Point if PDR is not conducted before Milestone B ProgramA B Initiation) C IOC FOC...start a new program 2.2 Background Conclusions flowing from these observations led the Office of the Secretary of Defense, the De - fense Acquisition

  3. 49 CFR 192.911 - What are the elements of an integrity management program?

    Science.gov (United States)

    2010-10-01

    ...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.911 What are the elements of an integrity management program...

  4. Application of the Single Hardening Model in the Finite Element Program ABAQUS

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    model, developed by Lade and Kim (Kim & Lade 1988, Lade & Kim 1988a, Lade & Kim 1988b) is implemented as a user defined material module, UMAT, in the commercial finite element program, ABAQUS. The advantages of the Single Hardening Model Iie in its ability to predict elastic and plastic displacements...

  5. Elements of Success: WorkReady Philadelphia Program Year 2011-2012 Report

    Science.gov (United States)

    Philadelphia Youth Network, 2012

    2012-01-01

    What does it take to deliver WorkReady Philadelphia's high-quality career-connected programming? In short, it's all about the "elements"--those essential components of the system that combine to produce success for young people. This 2011-12 WorkReady report reinforces this theme by using visual aspects of the "Periodic Table of…

  6. The ACR-program for automatic finite element model generation for part through cracks

    International Nuclear Information System (INIS)

    Leinonen, M.S.; Mikkola, T.P.J.

    1989-01-01

    The ACR-program (Automatic Finite Element Model Generation for Part Through Cracks) has been developed at the Technical Research Centre of Finland (VTT) for automatic finite element model generation for surface flaws using three dimensional solid elements. Circumferential or axial cracks can be generated on the inner or outer surface of a cylindrical or toroidal geometry. Several crack forms are available including the standard semi-elliptical surface crack. The program can be used in the development of automated systems for fracture mechanical analyses of structures. The tests for the accuracy of the FE-mesh have been started with two-dimensional models. The results indicate that the accuracy of the standard mesh is sufficient for practical analyses. Refinement of the standard mesh is needed in analyses with high load levels well over the limit load of the structure

  7. Core elements of hospital antibiotic stewardship programs from the Centers for Disease Control and Prevention.

    Science.gov (United States)

    Pollack, Loria A; Srinivasan, Arjun

    2014-10-15

    The proven benefits of antibiotic stewardship programs (ASPs) for optimizing antibiotic use and minimizing adverse events, such as Clostridium difficile and antibiotic resistance, have prompted the Centers for Disease Control and Prevention (CDC) to recommend that all hospitals have an ASP. This article summarizes Core Elements of Hospital Antibiotic Stewardship Programs, a recently released CDC document focused on defining the infrastructure and practices of coordinated multidisciplinary programs to improve antibiotic use and patient care in US hospitals. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  8. Program for responsible and safe disposal of spent fuel elements and radioactive wastes (National disposal program)

    International Nuclear Information System (INIS)

    2015-01-01

    The contribution covers the following topics: fundamentals of the disposal policy; amount of radioactive wastes and prognosis; disposal of radioactive wastes - spent fuel elements and wastes from waste processing, radioactive wastes with low heat production; legal framework of the nuclear waste disposal in Germany; public participation, cost and financing.

  9. Londonfahrten mit Hauptschuelern--ein Erfahrungsbericht (Trips to London with Junior High School Students--Experience Report)

    Science.gov (United States)

    Schepp, Peter

    1975-01-01

    Discusses trips to London with junior high school students: planning, choice of goals, costs, pocket money, board and lodging, language preparation, programming. Gives a detailed account of a trip which was particularly geared to the students' circumstances. The possibility of partnership with English schools is discussed. (Text is in German.)…

  10. Application of a general purpose finite element program system in pressure vessel technology

    International Nuclear Information System (INIS)

    Aamodt, B.; Sandsmark, N.; Medonos, S.

    1977-01-01

    Main advantages of using general purpose finite element program systems in structural analysis are summarized. Several illustrative applications of the program system SESAM-69 to pressure vessel problems are described. The first example is a dynamic analysis of the motor housing of the internal main circulation pump of a BWR nuclear reactor. The next example is a transient heat conduction and stress analysis of deflector of feeding nozzle of PWR nuclear reactor. Then, numerical calculations of stress intensity factors and fatigue crack growth of semi-elliptical surface cracks are discussed. And finally, an elasto-plastic analysis of a thick plate with edge-cracks is considered. It is concluded that due to the fact that general purpose finite element program systems are general and user-orientated, they will gain increasingly higher popularity in the years ahead

  11. PATH: a lumped-element beam-transport simulation program with space charge

    International Nuclear Information System (INIS)

    Farrell, J.A.

    1983-01-01

    PATH is a group of computer programs for simulating charged-particle beam-transport systems. It was developed for evaluating the effects of some aberrations without a time-consuming integration of trajectories through the system. The beam-transport portion of PATH is derived from the well-known program, DECAY TURTLE. PATH contains all features available in DECAY TURTLE (including the input format) plus additional features such as a more flexible random-ray generator, longitudinal phase space, some additional beamline elements, and space-charge routines. One of the programs also provides a simulation of an Alvarez linear accelerator. The programs, originally written for a CDC 7600 computer system, also are available on a VAX-VMS system. All of the programs are interactive with input prompting for ease of use

  12. One less trip : logging with less tripping, more protection

    Energy Technology Data Exchange (ETDEWEB)

    Byfield, M.

    2005-12-15

    New logging technology by Datalog Technology Inc. was described. Logging-while-tripping (LWT) technology uses a slim petrophysical sensor package that is moved to the targeted geological formation through a drill pipe, which reduces the exposure to vibration and shock involved in logging-while-drilling (LWD). The equipment features standard components in a patented configuration and comes in 2 segments: the receiver sub and the sensor package electronics. A receiver sub is inserted into the bottomhole assembly at the end of the drill string. Drilling progresses with the LWT sub in the bottomhole assembly until the borehole approaches the logging depth. The sensor package and electronics are then lowered into the drill string. If the well is horizontal, rig pumps push the package into the drill string until it lands in the LWT sub. Drill pipes are moved across the zone of interest and logs are recorded on downhole memory contained within the LWT package. As the logging operation progresses, a depth recorder at the surface records depth information along with the downhole recorders. When logging is completed, downhole tools are retrieved, and data downloaded from the LWT onboard memory is merged with the surface depth information to generate well logs. Retrieval via the drill string greatly reduces the risk of losing the logging gear, which contains radioactive material. Federal officials now routinely insist on extensive fishing operations to retrieve lost tools. If a well gets a gas kick while logging is in progress, the operator can still pump down mud or close the blowout preventer rams if necessary, and save time in determining where to perforate shallow gas wells. Compensated neutron logs, gamma rays, spectrum gamma rays, and induction have been tested with the LWT system. It was concluded that Petro-Canada has deployed the logs recently and has achieved results that compared satisfactorily with conventional logs. 2 figs.

  13. Nerva Fuel Element Development Program Summary Report - July 1966 through June 1972 Extrusion Studies

    Energy Technology Data Exchange (ETDEWEB)

    Napier, J. M.

    1973-09-21

    This part of the completion report pertaining to the NERVA graphite fuel element program covers data collected during the extrusion studies. The physical properties of the fuel element reached the following values: coefficient of thermal expansion (CTE) - 7.0 x 10-6/o C (25 - l,OOOo C); modulus of elasticity - 1.5 x lo6 psi; flexural strength - - 8,000 psi; ultimate strain to failure - 5,500 pidin; good thermal stress resistance. Matrices were produced which could be vapor coated with crack-free films of zirconium carbide. The CTE of the matrix was almost equal to the CTE of the zirconium carbide coating.

  14. The evaluation of multi-element personal dosemeters using the linear programming method

    International Nuclear Information System (INIS)

    Kragh, P.; Ambrosi, P.; Boehm, J.; Hilgers, G.

    1996-01-01

    Multi-element dosemeters are frequently used in individual monitoring. Each element can be regarded as an individual dosemeter with its own individual dose measurement value. In general, the individual dose values of one dosemeter vary according to the exposure conditions, i. e. the energy and angle of incidence of the radiation. The (final) dose measurement value of the personal dosemeter is calculated from the individual dose values by means of an evaluation algorithm. The best possible dose value, i.e. that of the smallest systematic (type B) uncertainty if the exposure conditions are changed in the dosemeter's rated range of use, is obtained by the method of linear programming. (author)

  15. Government-to-private sector energy programs: Identification of common elements leading to successful implementation

    Science.gov (United States)

    Stockton, Keith M.

    This dissertation examines six distinct government energy programs implemented in the United States during the last three decades. A common element within these programs is an attempt by government to drive commercialization of energy technologies leading to changes in energy production or consumptive behavior. We seek to understand the factors that lead to success or failure of these programs with two goals in mind. The first is theoretical in that we test a hypothesis that market-based energy programs have substantially higher success rates than command-and-control programs. The second goal is operational in nature, in which we desire to identify common factors within energy programs that lead either to program success or to failure. We investigate and evaluate three market-based and three command-and-control energy programs. The market-based programs include the federal Corporate Average Fuel Economy and Sulfur Dioxide Emissions Control programs as well as Colorado's Amendment 37. The command-and-control programs include the federal Synthetic Fuels Corporation and Corn Based Ethanol programs as well as Colorado's Solar Electric Power program. We conduct the analysis of each program based on composite methodology derived from leading academics within the Policy Sciences. From our research findings, we conclude that both market-based and command-and-control programs can achieve their legislative goals and objectives, resulting in permanent changes in energy production or consumptive behavior. However, we also find that the economic efficiency is the differentiator between market-based and command-and-control programs. Market-based programs, because of the inherent flexibility, allow participants to react to changing economic and/or technical conditions. In contrast, command-and-control programs lack such flexibility and often result in economic inefficiency when economic conditions change. The financial incentives incorporated in the three command

  16. Pre-Trip Notification Database (PTNS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The PTNS contains pre-trip notification data from vessels participating in the Northeast Multispecies groundfish fishery from 2010 to present and the Longfin squid...

  17. Large Pelagic Logbook Trip Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch and effort for fishing trips that are taken by vessels with a Federal permit issued for the swordfish and sharks under the Highly...

  18. Trip generation data collection in urban areas.

    Science.gov (United States)

    2014-09-01

    There is currently limited data on urban, multimodal trip generation at the individual site level. This lack of : data limits the ability of transportation agencies to assess development impacts on the transportation system : in urban and multimodal ...

  19. Trip electrical circuit of the gyrotion

    International Nuclear Information System (INIS)

    Rossi, J.O.

    1987-09-01

    The electron cyclotron resonance heating system of INPE/LAP is shown and the trip electrical circuit of the gyrotron is described, together with its fundamental aspects. The trip electrical circuit consists basically of a series regulator circuit which regulates the output voltage level and controls the pulse width time. Besides that, a protection circuit for both tubes, regulator and gyrotron, against faults in the system. (author) [pt

  20. The nonlinear finite element analysis program NUCAS (NUclear Containment Analysis System) for reinforced concrete containment building

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Jin; Lee, Hong Pyo; Seo, Jeong Moon [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    The maim goal of this research is to develop a nonlinear finite element analysis program NUCAS to accurately predict global and local failure modes of containment building subjected to internal pressure. In this report, we describe the techniques we developed throught this research. An adequate model to the analysis of containment building such as microscopic material model is adopted and it applied into the development Reissner-Mindlin degenerated shell element. To avoid finite element deficiencies, the substitute strains based on the assumed strain method is used in the shell formulation. Arc-length control method is also adopted to fully trace the peak load-displacement path due to crack formation. In addition, a benchmark test suite is developed to investigate the performance of NUCAS and proposed as the future benchmark tests for nonlinear analysis of reinforced concrete. Finally, the input format of NUCAS and the examples of input/output file are described. 39 refs., 65 figs., 8 tabs. (Author)

  1. Image Processing of Welding Procedure Specification and Pre-process program development for Finite Element Modelling

    International Nuclear Information System (INIS)

    Kim, K. S.; Lee, H. J.

    2009-11-01

    PRE-WELD program, which generates automatically the input file for the finite element analysis on the 2D butt welding at the dissimilar metal weld part, was developed. This program is pre-process program of the FEM code for analyzing the residual stress at the welding parts. Even if the users have not the detail knowledge for the FEM modelling, the users can make the ABAQUS INPUT easily by inputting the shape data of welding part, the weld current and voltage of welding parameters. By using PRE-WELD program, we can save the time and the effort greatly for preparing the ABAQUS INPUT for the residual stress analysis at the welding parts, and make the exact input without the human error

  2. An object-oriented class design for the generalized finite element method programming

    Directory of Open Access Journals (Sweden)

    Dorival Piedade Neto

    Full Text Available The Generalized Finite Element Method (GFEM is a numerical method based on the Finite Element Method (FEM, presenting as its main feature the possibility of improving the solution by means of local enrichment functions. In spite of its advantages, the method demands a complex data structure, which can be especially benefited by the Object-Oriented Programming (OOP. Even though the OOP for the traditional FEM has been extensively described in the technical literature, specific design issues related to the GFEM are yet little discussed and not clearly defined. In the present article it is described an Object-Oriented (OO class design for the GFEM, aiming to achieve a computational code that presents a flexible class structure, circumventing the difficulties associated to the method characteristics. The proposed design is evaluated by means of some numerical examples, computed using a code implemented in Python programming language.

  3. Field Trip - Conservation of Carnivores in Namibia

    Science.gov (United States)

    Gibson, Amanda

    2017-04-01

    Field trips are a key component of our curriculum at ISWB. Classroom teaching is invaluable but field trips provide pupils with a tangible connection to pertinent issues of conservation. ISWB realises the importance of out of the classroom learning in field trips and to this end our students have an opportunity to partake in a number of 3-5 day field trips per academic year. In 2016, several Year 8, 9, 10, 11 and 12 students visited the AfriCat Foundation on Okonjima in central Namibia for 4 days to learn about the conservation of the predator population in Namibia. The trips were very successful and another trip this year to AfriCat North close to Etosha National Park, where the students will work closely with the local farming communities, is planned. AfriCat provides Environmental Education programmes for the youth of Namibia giving them a greater understanding of the importance of wildlife conservation. Their main objective is promoting predator and environmental awareness amongst the youth of Namibia. AfriCat Environmental Education Programme is based on 1997 UNESCO-UNEP Environmental Education objectives. "Attitudes: To raise concern about problems, values, personal responsibility and willingness to participate/act. In the end, we conserve only what we love. We will love only what we understand. We will understand only what we are taught."

  4. Assessment of non-linear analysis finite element program (NONSAP) for inelastic analysis

    International Nuclear Information System (INIS)

    Chang, T.Y.; Prachuktam, S.; Reich, M.

    1976-11-01

    An assessment on a nonlinear structural analysis finite element program called NONSAP is given with respect to its inelastic analysis capability for pressure vessels and components. The assessment was made from the review of its theoretical basis and bench mark problem runs. It was found that NONSAP has only limited capability for inelastic analysis. However, the program was written flexible enough that it can be easily extended or modified to suit the user's need. Moreover, some of the numerical difficulties in using NONSAP are pointed out

  5. Spatially dependent burnup implementation into the nodal program based on the finite element response matrix method

    International Nuclear Information System (INIS)

    Yoriyaz, H.

    1986-01-01

    In this work a spatial burnup scheme and feedback effects has been implemented into the FERM ( 'Finite Element Response Matrix' )program. The spatially dependent neutronic parameters have been considered in three levels: zonewise calculation, assembly wise calculation and pointwise calculation. Flux and power distributions and the multiplication factor were calculated and compared with the results obtained by CITATIOn program. These comparisons showed that processing time in the Ferm code has been hundred of times shorter and no significant difference has been observed in the assembly average power distribution. (Author) [pt

  6. Quantum Biology at the Cellular Level - elements of the research program

    OpenAIRE

    Bordonaro, Michael; Ogryzko, Vasily

    2013-01-01

    Quantum Biology is emerging as a new field at the intersection between fundamental physics and biology, promising novel insights into the nature and origin of biological order. We discuss several elements of QBCL (Quantum Biology at Cellular Level), a research program designed to extend the reach of quantum concepts to higher than molecular levels of biological organization. Key words. decoherence, macroscopic superpositions, basis-dependence, formal superposition, non-classical correlations,...

  7. Effect of a three-month football training program on trace element ...

    African Journals Online (AJOL)

    This study was conducted to examine the effects of a three-month football training program on some trace elements in the serum in male kids aged between eight and twelve years. The study registered eight boys whose mean age was 10.25 ± 0.75 years, mean height was 138.63 ± 3.28 cm and mean weight was 32.13 ...

  8. MP Salsa: a finite element computer program for reacting flow problems. Part 1--theoretical development

    Energy Technology Data Exchange (ETDEWEB)

    Shadid, J.N.; Moffat, H.K.; Hutchinson, S.A.; Hennigan, G.L.; Devine, K.D.; Salinger, A.G.

    1996-05-01

    The theoretical background for the finite element computer program, MPSalsa, is presented in detail. MPSalsa is designed to solve laminar, low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow, heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solver coupled multiple Poisson or advection-diffusion- reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMKIN, respectively. The code employs unstructured meshes, using the EXODUS II finite element data base suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec solver library.

  9. Field Trips as Valuable Learning Experiences in Geography Courses

    Science.gov (United States)

    Krakowka, Amy Richmond

    2012-01-01

    Field trips have been acknowledged as valuable learning experiences in geography. This article uses Kolb's (1984) experiential learning model to discuss how students learn and how field trips can help enhance learning. Using Kolb's experiential learning theory as a guide in the design of field trips helps ensure that field trips contribute to…

  10. Elastic tripping analysis of corroded stiffeners in stiffened plate with irregular surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Rahbarranji, Ahmad [AmirKabir University of Technology, Tehran (Iran, Islamic Republic of)

    2014-09-15

    Tripping of stiffeners is one of the buckling modes of stiffened panels which could rapidly lead to its catastrophic failure. Loss of thickness in the web and flange of stiffeners due to corrosion reduces elastic buckling strength. It is common practice to assume a uniform thickness reduction for corroded surfaces. To estimate the remaining strength of a corroded structure, a much higher level of accuracy is required since corroded surfaces are irregular. Finite element method is employed to analyze elastic tripping stress of corroded stiffeners with irregular surfaces. Comparing the results with elastic tripping stress of un-corroded stiffener, a reduction factor is introduced. It is found that for flat-bars and angle-bars the reduction factor increases by increasing corrosion loss; however, for tee-bars remains almost unchanged. Surface roughness has no significant effect on reduction of tripping Euler stress of angle-bars and flat-bars; however, it has an effect on reduction of tripping Euler stress of small flat-bars. For high values of corrosion loss, reduction of tripping Euler stress is higher in flat-bars than angle-bars. Corrosion at the mid-length or ends of flat-bars is more detrimental than full length. Corrosion at the ends of angle-bars is more detrimental than full length and mid-length.

  11. High-Uranium-Loaded U3O8-Al fuel element development program. Part 1

    International Nuclear Information System (INIS)

    Martin, M.M.

    1993-01-01

    The High-Uranium-Loaded U 3 O 8 -Al Fuel Element Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages. The specific objective of the program is to develop the technological and engineering data base for U 3 O 8 -Al plate-type fuel elements of maximal uranium content to the point of vendor qualification for full scale fabrication on a production basis. A program and management plan that details the organization, supporting objectives, schedule, and budget is in place and preparation for fuel and irradiation studies is under way. The current programming envisions a program of about four years duration for an estimated cost of about two million dollars. During the decades of the fifties and sixties, developments at Oak Ridge National Laboratory led to the use of U 3 O 8 -Al plate-type fuel elements in the High Flux Isotope Reactor, Oak Ridge Research Reactor, Puerto Rico Nuclear Center Reactor, and the High Flux Beam Reactor. Most of the developmental information however applies only up to a uranium concentration of about 55 wt % (about 35 vol % U 3 O 8 ). The technical issues that must be addressed to further increase the uranium loading beyond 55 wt % U involve plate fabrication phenomena of voids and dogboning, fuel behavior under long irradiation, and potential for the thermite reaction between U 3 O 8 and aluminum

  12. Finite element and node point generation computer programs used for the design of toroidal field coils in tokamak fusion devices

    International Nuclear Information System (INIS)

    Smith, R.A.

    1975-06-01

    The structural analysis of toroidal field coils in Tokamak fusion machines can be performed with the finite element method. This technique has been employed for design evaluations of toroidal field coils on the Princeton Large Torus (PLT), the Poloidal Diverter Experiment (PDX), and the Tokamak Fusion Test Reactor (TFTR). The application of the finite element method can be simplified with computer programs that are used to generate the input data for the finite element code. There are three areas of data input where significant automation can be provided by supplementary computer codes. These concern the definition of geometry by a node point mesh, the definition of the finite elements from the geometric node points, and the definition of the node point force/displacement boundary conditions. The node point forces in a model of a toroidal field coil are computed from the vector cross product of the coil current and the magnetic field. The computer programs named PDXNODE and ELEMENT are described. The program PDXNODE generates the geometric node points of a finite element model for a toroidal field coil. The program ELEMENT defines the finite elements of the model from the node points and from material property considerations. The program descriptions include input requirements, the output, the program logic, the methods of generating complex geometries with multiple runs, computational time and computer compatibility. The output format of PDXNODE and ELEMENT make them compatible with PDXFORC and two general purpose finite element computer codes: (ANSYS) the Engineering Analysis System written by the Swanson Analysis Systems, Inc., and (WECAN) the Westinghouse Electric Computer Analysis general purpose finite element program. The Fortran listings of PDXNODE and ELEMENT are provided

  13. A new program for calculating matrix elements of one-particle operators in jj-coupling

    International Nuclear Information System (INIS)

    Pyper, N.C.; Grant, I.P.; Beatham, N.

    1978-01-01

    The aim of this paper is to calculate the matrix elements of one-particle tensor operators occurring in atomic and nuclear theory between configuration state functions representing states containing any number of open shells in jj-coupling. The program calculates the angular part of these matrix elements. The program is essentially a new version of RDMEJJ, written by J.J. Chang. The aims of this version are to eliminate inconsistencies from RDMEJJ, to modify its input requirements for consistency with MCP75, and to modify its output so that it can be stored in a discfile for access by other compatible programs. The program assumes that the configurational states are built from a common orthonormal set of basis orbitals. The number of electrons in a shell having j>=9/2 is restricted to be not greater than 2 by the available CFP routines . The present version allows up to 40 orbitals and 50 configurational states with <=10 open shells; these numbers can be changed by recompiling with modified COMMON/DIMENSION statements. The user should ensure that the CPC library subprograms AAGD, ACRI incorporate all current updates and have been converted to use double precision floating point arithmetic. (Auth.)

  14. Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels

    International Nuclear Information System (INIS)

    El-Taib Heakal, F.; Tantawy, N.S.; Shehta, O.S.

    2011-01-01

    Highlights: → Systematic increase of chloride concentration has a critical influence on TRIP steel corrosion. → TRIP microalloyed with Nb and Cr showed lower corrosion rate and smaller threshold Cl - value. → Increasing Al content by 220 times in the TRIP deteriorates its corrosion behavior. → Impedance results and surface examinations confirmed the obtained results. - Abstract: The effect of a systematic increase of chloride ion concentration on the electrochemical corrosion behavior of two types of Al-bearing TRIP steels (T 1 and T 2 ) was studied in aqueous NaCl solutions. Several electrochemical techniques were used comprising open circuit potential measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Chloride concentration has a critical influence on the corrosion rate of the two tested steel samples. For both steels the corrosion rate first increased with increasing chloride content up to a certain critical concentration (CC), and then decreased in solution with chloride level higher than the threshold value. TRIP steel T 1 microalloyed with Nb and Cr as compared to steel T 2 not containing these two elements, exhibited lower corrosion rate and smaller CC value, indicating better corrosion resistance to chloride attack, albeit the Al content in T 2 is 220 times higher than that in T 1 . This is because Nb alloyed with TRIP steel likely enhances the formation on the surface of a stable rust layer enriched with other passivating elements Al, Cu, Cr and Ni, which has higher corrosion resistance and hence improve greatly the passive performance of the TRIP sample. The ac impedance data are in good agreement with the OCP and dc polarization measurements. Surface examinations via scanning electron microscope confirmed well the obtained results.

  15. Trip-Induced Transition Measurements in a Hypersonic Boundary Layer Using Molecular Tagging Velocimetry

    Science.gov (United States)

    Bathel, Brett F.; Danehy, Paul M.; Jones, Stephen B.; Johansen, Craig T.; Goyne, Christopher P.

    2013-01-01

    Measurements of mean streamwise velocity, fluctuating streamwise velocity, and instantaneous streamwise velocity profiles in a hypersonic boundary layer were obtained over a 10-degree half-angle wedge model. A laser-induced fluorescence-based molecular tagging velocimetry technique was used to make the measurements. The nominal edge Mach number was 4.2. Velocity profiles were measured both in an untripped boundary layer and in the wake of a 4-mm diameter cylindrical tripping element centered 75.4 mm downstream of the sharp leading edge. Three different trip heights were investigated: k = 0.53 mm, k = 1.0 mm and k = 2.0 mm. The laminar boundary layer thickness at the position of the measurements was approximately 1 mm, though the exact thickness was dependent on Reynolds number and wall temperature. All of the measurements were made starting from a streamwise location approximately 18 mm downstream of the tripping element. This measurement region continued approximately 30 mm in the streamwise direction. Additionally, measurements were made at several spanwise locations. An analysis of flow features show how the magnitude, spatial location, and spatial growth of streamwise velocity instabilities are affected by parameters such as the ratio of trip height to boundary layer thickness and roughness Reynolds number. The fluctuating component of streamwise velocity measured along the centerline of the model increased from approximately 75 m/s with no trip to +/-225 m/s with a 0.53-mm trip, and to +/-240 m/s with a 1-mm trip, while holding the freestream Reynolds number constant. These measurements were performed in the 31-inch Mach 10 Air Tunnel at the NASA Langley Research Center.

  16. Influence of chloride ion concentration on the corrosion behavior of Al-bearing TRIP steels

    Energy Technology Data Exchange (ETDEWEB)

    El-Taib Heakal, F., E-mail: fakihaheakal@yahoo.com [Chemistry Department, Faculty of Science, Cairo University, Giza 12613 (Egypt); Tantawy, N.S. [Chemistry Department, Girl' s College for Arts, Science and Education, Ain Shams University, Cairo (Egypt); Shehta, O.S. [Physical Chemistry Department, National Research Centre, Dokki, Giza (Egypt)

    2011-10-17

    Highlights: {yields} Systematic increase of chloride concentration has a critical influence on TRIP steel corrosion. {yields} TRIP microalloyed with Nb and Cr showed lower corrosion rate and smaller threshold Cl{sup -} value. {yields} Increasing Al content by 220 times in the TRIP deteriorates its corrosion behavior. {yields} Impedance results and surface examinations confirmed the obtained results. - Abstract: The effect of a systematic increase of chloride ion concentration on the electrochemical corrosion behavior of two types of Al-bearing TRIP steels (T{sub 1} and T{sub 2}) was studied in aqueous NaCl solutions. Several electrochemical techniques were used comprising open circuit potential measurements, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS). Chloride concentration has a critical influence on the corrosion rate of the two tested steel samples. For both steels the corrosion rate first increased with increasing chloride content up to a certain critical concentration (CC), and then decreased in solution with chloride level higher than the threshold value. TRIP steel T{sub 1} microalloyed with Nb and Cr as compared to steel T{sub 2} not containing these two elements, exhibited lower corrosion rate and smaller CC value, indicating better corrosion resistance to chloride attack, albeit the Al content in T{sub 2} is 220 times higher than that in T{sub 1}. This is because Nb alloyed with TRIP steel likely enhances the formation on the surface of a stable rust layer enriched with other passivating elements Al, Cu, Cr and Ni, which has higher corrosion resistance and hence improve greatly the passive performance of the TRIP sample. The ac impedance data are in good agreement with the OCP and dc polarization measurements. Surface examinations via scanning electron microscope confirmed well the obtained results.

  17. LOOM-P: a finite element mesh generation program with on-line graphic display

    International Nuclear Information System (INIS)

    Ise, Takeharu; Yamazaki, Toshio.

    1977-06-01

    A description of the two-dimensional mesh generation program, LOOM-P, is given in detail. The program is developed newly to produce a mesh network for a reactor core geometry with the help of an automatic mesh generation routine built in it, under the control of the refresh-type graphic display. It is therefore similar to the edit program of the self-organizing mesh generator, QMESH-RENUM. Additional techniques are incorporated to improve the pattern of mesh elements by means of on-line conversational mode. The obtained mesh network is edited out as input data to the three-dimensional neutron diffusion theory code, FEM-BABEL. (auth.)

  18. Finite element method programs to analyze irradiation behavior of fuel pellets

    International Nuclear Information System (INIS)

    Yamada, Rayji; Harayama, Yasuo; Ishibashi, Akihiro; Ono, Masao.

    1979-09-01

    For the safety assessment of reactor fuel, it is important to grasp local changes of fuel pins due to irradiation in a reactor. Such changes of fuel result mostly from irradiation of fuel pellets. Elasto-plastic analysis programs based on the finite element method were developed to analyze these local changes. In the programs, emphasis is placed on the analysis of cracks in pellets; the interaction between cracked-pellets and cladding is not taken into consideration. The two programs developed are FEMF3 based on a two-dimensional axially symmetric model (r-z system) and FREB4 on a two-dimensional plane model (r-theta system). It is discussed in this report how the occurrence and distribution of cracks depend on heat rate of the fuel pin. (author)

  19. Transient behaviour study program of research reactors fuel elements at the Hydra Pulse Reactor

    International Nuclear Information System (INIS)

    Khvostionov, V.E.; Egorenkov, P.M.; Malankin, P.V.

    2004-01-01

    Program on behavior study of research reactor Fuel Elements (FE) under transient regimes initiated by excessive reactivity insertion is being presented. Program would be realized at HYDRA pulse reactor at Russian Research Center 'Kurchatov Institute' (RRC 'K1'). HYDRA uses aqueous solution of uranyl sulfate (UO 2 SO 4 ) as a fuel. Up to 30 MJ of energy can be released inside the core during the single pulse, effective power pulse width varying from 2 to 10 ms. Reactor facility allows to investigate behaviour of FE consisting of different types of fuel composition, being developed according to Russian RERTR. First part of program is aimed at transient behaviour studying of FE MR, IRT-3M, WWR-M5 types containing meats based on dioxide uranium in aluminum matrix. Mentioned FEs use 90% and 36% enriched uranium. (author)

  20. KUEBEL. A Fortran program for computation of cooling-agent-distribution within reactor fuel-elements

    International Nuclear Information System (INIS)

    Inhoven, H.

    1984-12-01

    KUEBEL is a Fortran-program for computation of cooling-agent-distribution within reactor fuel-elements or -zones of theirs. They may be assembled of max. 40 cooling-channels with laminar up to turbulent type of flow (respecting Reynolds' coefficients up to 2.0E+06) at equal pressure loss. Flow-velocity, dynamic flow-, contraction- and friction-losses will be calculated for each channel and for the total zone. Other computations will present mean heat-up of cooling-agent, mean outlet-temperature of the core, boiling-temperature and absolute pressure at flow-outlet. All characteristic coolant-values, including the factor of safety for flow-instability of the most-loaded cooling gap are computed by 'KUEBEL' too. Absolute pressure at flow-outlet or is-factor may be defined as dependent or independent variables of the program alternatively. In latter case 3 variations of solution will be available: Adapted flow of cooling-agent, inlet-temperature of the core and thermal power. All calculations can be done alternatively with variation of parameters: flow of cooling-agent, inlet-temperature of the core and thermal power, which are managed by the program itself. 'KUEBEL' is able to distinguish light- and heavy-water coolant, flow-direction of coolant and fuel elements with parallel, rectangular, respectively concentric, cylindrical shape of their gaps. Required material specifics are generated by the program. Segments of fuel elements or constructively unconnected gaps can also be computed by means of interposition of S.C. 'phantom channels'. (orig.) [de

  1. Development program for fuel elements with low enriched uranium for high temperature reactors

    International Nuclear Information System (INIS)

    1987-12-01

    The results of HTR fuel development taking place at the THTR's can be summarized as follows for the main points of core manufacture coating matrix and fuel emenent manufacture: 1. The well known gel precipitation process was modified for the manufacture of UO 2 cores. 2. The TRISO coating (additional SiC layer between two very dense PyC layers) can be applied with the required quality on an economical 10 kg scale. 3. The particle fracture in the complete fuel element due to manufacture was lowered during the course of the project to below the target values of -6 U/U total. For testing fuel elements, the required irradiation samples were designed in agreement with the reactor constructors, were prepared and the first phase of the irradiation program was successfully completed in the context of the HBK project. (orig./HP) [de

  2. Analysis of Peach Bottom turbine trip tests

    International Nuclear Information System (INIS)

    Cheng, H.S.; Lu, M.S.; Hsu, C.J.; Shier, W.G.; Diamond, D.J.; Levine, M.M.; Odar, F.

    1979-01-01

    Current interest in the analysis of turbine trip transients has been generated by the recent tests performed at the Peach Bottom (Unit 2) reactor. Three tests, simulating turbine trip transients, were performed at different initial power and coolant flow conditions. The data from these tests provide considerable information to aid qualification of computer codes that are currently used in BWR design analysis. The results are presented of an analysis of a turbine trip transient using the RELAP-3B and the BNL-TWIGL computer codes. Specific results are provided comparing the calculated reactor power and system pressures with the test data. Excellent agreement for all three test transients is evident from the comparisons

  3. Spreading Geodiversity awareness in schools through field trips and ICT

    Science.gov (United States)

    Magagna, Alessandra; Giardino, Marco; Ferrero, Elena

    2014-05-01

    comparing the real and the virtual experience. Particularly, the geological history of an Alpine Piedmont area West of Torino (NW Italy) has been investigated. A one-day educational field trip has been performed starting from the man-made features of the Sangano town, walking on the present-day, historical and pre-historical fluvial landforms of the Sangone River, and finally climbing up the Pleistocene glacial landforms of the Rivoli-Avigliana Morainic Amphitheatre. The track offers samples of the Geodiversity of the area by showing a variety of landforms and including panoramic views to the Alpine chain. Students collected geomorphological data and carried out research-type activities, such as mapping and describing landforms, making hypotheses on geomorphic processes and gathering useful elements for the reconstruction of the geological history of the area. By taking awareness of the spatial and temporal scales related to landforms and geomorphic processes, as well as to the Man-Nature interactions, students realize the "dynamic dimension" of Geodiversity. As a consequence, students can perceive the geomorphological landscape as a changeable system over time, and therefore worthy of protection.

  4. NAMMU: finite element program for coupled heat and groundwater flow problems

    International Nuclear Information System (INIS)

    Rae, J.; Robinson, P.C.

    1979-11-01

    NAMMU is a computer program which will calculate the evolution in time of coupled water and heat flow in a porous medium. It is intended to be used primarily for modelling studies of underground nuclear waste repositories. NAMMU is based on the Galerkin-Finite-element method and has self-adjusting time stepping. The present version is written for 2-dimensional cartesian or cylindrical coordinate systems. It has been checked against two calculations from the KBS study and an exact solution by Hodgkinson for a very idealised repository design. (author)

  5. Ultimate limit state design of sheet pile walls by finite elements and nonlinear programming

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Damkilde, Lars; Krabbenhøft, Sven

    2005-01-01

    The design of sheet pile walls by lower bound limit analysis is considered. The design problem involves the determination of the necessary yield moment of the wall, the wall depth and the anchor force such that the structure is able to sustain the given loads. This problem is formulated...... as a nonlinear programming problem where the yield moment of the wall is minimized subject to equilibrium and yield conditions. The finite element discretization used enables exact fulfillment of these conditions and thus, according to the lower bound theorem, the solutions are safe....

  6. Some notes on the big trip

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Diaz, Pedro F. [Colina de los Chopos, Centro de Fisica ' Miguel A. Catalan' , Instituto de Matematicas y Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 121, 28006 Madrid (Spain)]. E-mail: pedrogonzalez@mi.madritel.es

    2006-03-30

    The big trip is a cosmological process thought to occur in the future by which the entire universe would be engulfed inside a gigantic wormhole and might travel through it along space and time. In this Letter we discuss different arguments that have been raised against the viability of that process, reaching the conclusions that the process can actually occur by accretion of phantom energy onto the wormholes and that it is stable and might occur in the global context of a multiverse model. We finally argue that the big trip does not contradict any holographic bounds on entropy and information.

  7. Some notes on the big trip

    International Nuclear Information System (INIS)

    Gonzalez-Diaz, Pedro F.

    2006-01-01

    The big trip is a cosmological process thought to occur in the future by which the entire universe would be engulfed inside a gigantic wormhole and might travel through it along space and time. In this Letter we discuss different arguments that have been raised against the viability of that process, reaching the conclusions that the process can actually occur by accretion of phantom energy onto the wormholes and that it is stable and might occur in the global context of a multiverse model. We finally argue that the big trip does not contradict any holographic bounds on entropy and information

  8. MCMII and the TriP chip

    Energy Technology Data Exchange (ETDEWEB)

    Juan Estrada et al.

    2003-12-19

    We describe the development of the electronics that will be used to read out the Fiber Tracker and Preshower detectors in Run IIb. This electronics is needed for operation at 132ns bunch crossing, and may provide a measurement of the z coordinate of the Fiber Tracker hits when operating at 396ns bunch crossing. Specifically, we describe the design and preliminary tests of the Trip chip, MCM IIa, MCM IIb and MCM IIc. This document also serves as a user manual for the Trip chip and the MCM.

  9. NEWS: A trip to CERN

    Science.gov (United States)

    Ellison, A. D.

    2000-07-01

    the canteen. Over lunch we mixed with physicists of many different nationalities and backgrounds. Figure 1 Figure 1. In the afternoon we visited Microcosm, the CERN visitors centre, and the LEP control room and also the SPS. Here the students learned new applications for much of the physics of standing waves and resonance that they had been taught in the classroom. Later that night, we visited a bowling alley where momentum and collision theory were put into practice. The following morning we returned to CERN and visited the large magnet testing facility. Here again physics was brought to life. We saw superconducting magnets being assembled and tested and the students gained a real appreciation of the problems and principles involved. The afternoon was rounded off by a visit to a science museum in Geneva - well worth a visit, as some of us still use some of the apparatus on display. Friday was our last full day so we visited Chamonix in the northern Alps. In the morning, we ascended the Aiguille de Midi - by cable car. Twenty minutes and 3842 m later we emerged into 50 km h-1 winds and -10 °C temperature, not counting the -10 °C wind chill factor. A crisp packet provided an unusual demonstration of the effects of air pressure (figure 2). Figure 2 Figure 2. The views from the summit were very spectacular though a few people experienced mild altitude sickness. That afternoon the party went to the Mer de Glace. Being inside a 3 million year-old structure moving down a mountain at 3 cm per day was an interesting experience, as was a tot of whisky with 3 million year-old water. Once again the local scenery was very photogenic and the click and whirr of cameras was a constant background noise. Saturday morning saw an early start for the long drive home. Most students - and some staff - took the opportunity to catch up on their sleep. Thanks are due to many people without whom the trip would never have taken place. Anne Craige, Stuart Williams

  10. Quality-assurance study of the special-purpose finite-element program SPECTROM: II. Plasticity problems

    International Nuclear Information System (INIS)

    Callahan, G.D.; Fossum, A.F.

    1982-11-01

    General plasticity theory and solution techniques as are currently employed in RE/SPEC's finite element plasticity code SPECTROM-II are presented. Various yield functions are discussed and their differences are illustrated using example problems. Comparison of the results of SPECTROM-II with analytical solutions, numerical solutions, and the general purpose finite element program MARC-CDC show excellent agreement

  11. Accounting for straight parts effects on elbow's flexibilities in a beam type finite element program

    International Nuclear Information System (INIS)

    Millard, A.

    1983-01-01

    An extension of Von Karman's theory is applied to the calculations of the flexibility factor of a pipe bend terminated by a straight part or a flange. This analysis is restricted to the linear elastic deformation behaviour under in plane bending. Analytical solutions are given for the propagation of ovalization in the elbow and in the straight part. Considering the response of the piping structures, we note that the ovalization of the piping systems are reduced significantly when the straight parts or flanges effects are included. This results are presented in terms of global as well local flexibility factors. They have been compared to numerical results obtained by shell type finite elements method. A complete piping system is analyzed, for economical reasons, with a beam type approach. Also, we show how it is possible to take into account an elbow's flexibilities the straight parts effects by means of flexibilities factors introduced in a beam type elements. We have implemented this method in the computer program TEDEL. In some specific geometrical features, we compare solutions using shell type elements and our formulation. (orig.)

  12. Accounting for straight parts effects on elbow's flexibilities in a beam type finite element program

    International Nuclear Information System (INIS)

    Millard, A.; Vaghi, H.; Ricard, A.

    1983-08-01

    An extension of Von Karman's theory is applied to the calculations of the flexibility factor of a pipe bend terminated by a straight part or a flange. This analysis is restricted to the linear elastic deformation behaviour under in plane bending. Analytical solutions are given for the propagation of ovalization in the elbow and in the straight part. Considering the response of the piping structures, we note that the ovalization of the piping systems are reduced significantly when the straight parts or flanges effects are included. The results are presented in terms of global as well local flexibility factors. They have been compared to numerical results obtained by shell type finite element method. A complete piping system is analyzed, for economical reasons, with a beam type approach. Also, we show how it is possible to take into account on elbow's flexibilities the straight parts effects by means of flexibilities factors introduced in a beam type element. We have implemented this method in the computer program TEDEL. In some specific geometrical features, we compare solutions using shell type elements and our formulation

  13. STARS: An Integrated, Multidisciplinary, Finite-Element, Structural, Fluids, Aeroelastic, and Aeroservoelastic Analysis Computer Program

    Science.gov (United States)

    Gupta, K. K.

    1997-01-01

    A multidisciplinary, finite element-based, highly graphics-oriented, linear and nonlinear analysis capability that includes such disciplines as structures, heat transfer, linear aerodynamics, computational fluid dynamics, and controls engineering has been achieved by integrating several new modules in the original STARS (STructural Analysis RoutineS) computer program. Each individual analysis module is general-purpose in nature and is effectively integrated to yield aeroelastic and aeroservoelastic solutions of complex engineering problems. Examples of advanced NASA Dryden Flight Research Center projects analyzed by the code in recent years include the X-29A, F-18 High Alpha Research Vehicle/Thrust Vectoring Control System, B-52/Pegasus Generic Hypersonics, National AeroSpace Plane (NASP), SR-71/Hypersonic Launch Vehicle, and High Speed Civil Transport (HSCT) projects. Extensive graphics capabilities exist for convenient model development and postprocessing of analysis results. The program is written in modular form in standard FORTRAN language to run on a variety of computers, such as the IBM RISC/6000, SGI, DEC, Cray, and personal computer; associated graphics codes use OpenGL and IBM/graPHIGS language for color depiction. This program is available from COSMIC, the NASA agency for distribution of computer programs.

  14. Amending the Oil Pollution Act of 1990 for state implementation of program elements

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, L. [Alaska Dept. of Environmental Conservation, Juneau, AK (United States)

    1997-10-01

    A legal argument was made in favour of amending the Oil Pollution Act (OPA) of 1990 to allow state implementation of a portion or portions of the law. As it now stands the OPA does not have language for delegating program elements to the states. A review of the legislation indicated that a number of program elements may be more effectively carried out by the State of Alaska, while others should continue to be administered by both the federal and state governments. The review and approval of industry contingency plans for manned and unmanned vessels/barges carrying oil as a primary cargo is one example where efficiencies may be gained. Such plans are currently submitted to Coast Guard headquarters in Washington and retained there. In effect, there is no `local` federal knowledge of the vessel response plans approved for operation in the State of Alaska, nor do Alaskans have the opportunity to review or comment on the adequacy of these plans. Components where efficiencies would be gained include: local review of industry contingency/ response plans, inventory of existing rural above-ground tank farms, coordination of vessel and facility inspections, area contingency plan development and access to federal clean up funds. Past experience clearly indicates that delegation to the states is a workable proposition. There is no apparent justification for not extending this provision to the OPA, not as a mandate, but as an option for reducing cost and improving efficiency. 28 refs.

  15. Amending the Oil Pollution Act of 1990 for state implementation of program elements

    International Nuclear Information System (INIS)

    Pearson, L.

    1997-01-01

    A legal argument was made in favour of amending the Oil Pollution Act (OPA) of 1990 to allow state implementation of a portion or portions of the law. As it now stands the OPA does not have language for delegating program elements to the states. A review of the legislation indicated that a number of program elements may be more effectively carried out by the State of Alaska, while others should continue to be administered by both the federal and state governments. The review and approval of industry contingency plans for manned and unmanned vessels/barges carrying oil as a primary cargo is one example where efficiencies may be gained. Such plans are currently submitted to Coast Guard headquarters in Washington and retained there. In effect, there is no 'local' federal knowledge of the vessel response plans approved for operation in the State of Alaska, nor do Alaskans have the opportunity to review or comment on the adequacy of these plans. Components where efficiencies would be gained include: local review of industry contingency/ response plans, inventory of existing rural above-ground tank farms, coordination of vessel and facility inspections, area contingency plan development and access to federal clean up funds. Past experience clearly indicates that delegation to the states is a workable proposition. There is no apparent justification for not extending this provision to the OPA, not as a mandate, but as an option for reducing cost and improving efficiency. 28 refs

  16. Human Health Countermeasures (HHC) Element Management Plan: Human Research Program. Revision B

    Science.gov (United States)

    Norsk, Peter; Baumann, David

    2012-01-01

    NASA s Human Research Program (HRP) is an applied research and technology program within the Human Exploration and Operations Mission Directorate (HEOMD) that addresses human health and performance risk mitigation strategies in support of exploration missions. The HRP research and technology development is focused on the highest priority risks to crew health and safety with the goal of ensuring mission success and maintaining long-term crew health. Crew health and performance standards, defined by the NASA Chief Health and Medical Officer (CHMO), set the acceptable risk level for exploration missions. The HRP conducts research to inform these standards as well as provide deliverables, such as countermeasures, that ensure standards can be met to maximize human performance and mission success. The Human Health Countermeasures (HHC) Element was formed as part of the HRP to develop a scientifically-based, integrated approach to understanding and mitigating the health risks associated with human spaceflight. These health risks have been organized into four research portfolios that group similar or related risks. A fifth portfolio exists for managing technology developments and infrastructure projects. The HHC Element portfolios consist of: a) Vision and Cardiovascular; b) Exercise and Performance; c) Multisystem; d) Bone; and e) Technology and Infrastructure. The HHC identifies gaps associated with the health risks and plans human physiology research that will result in knowledge required to more fully understand risks and will result in validated countermeasures to mitigate risks.

  17. Information on the evolution of severe LWR fuel element damage obtained in the CORA program

    International Nuclear Information System (INIS)

    Schanz, G.; Hagen, S.; Hofmann, P.; Sepold, L.; Schumacher, G.

    1992-01-01

    In the CORA program a series of out-of-pile experiments on LWR severe accidental situations is being performed, in which test bundles of LWR typical components and arrangements (PWR, BWR) are exposed to temperature transients up to about 2400deg C under flowing steam. The individual features of the facility, the test conduct, and the evaluation will be presented. In the frame of the international cooperation in severe fuel damage (SFD) programs the CORA tests are contributing confirmatory and complementary informations to the results from the limited number of in-pile tests. The identification of basic phenomena of the fuel element destruction, observed as a function of temperature, is supported by separate-effects test results. Most important mechanisms are the steam oxidation of the Zircaloy cladding, which determines the temperature escalation, the chemical interaction between UO 2 fuel and cladding, which dominates fuel liquefaction, relocation and resulting blockage formation, as well as chemical interactions with Inconel spacer grids and absorber units ((Ag, In, Cd) alloy or B 4 C), which are leading to extensive low-temperature melt formation around 1200deg C. Interrelations between those basic phenomena, resulting for example in cladding deformation ('flowering') and the dramatic hydrogen formation in response to the fast cooling of a hot bundle by cold water ('quenching') are determining the evolution paths of fuel element destruction, which are to be identified. (orig.)

  18. A Quasi-Practical Interstellar Rocket Trip

    Science.gov (United States)

    Edmonds, James D., Jr.

    1974-01-01

    Mathematically shows that in principle a spaceship could travel eight light years in ten earth years, with the passengers arriving 4.6 years older than when they left earth and having experienced an acceleration induced effective gravity of one g for the entire trip. (MLH)

  19. WIPP site and vicinity geological field trip

    International Nuclear Information System (INIS)

    Chaturvedi, L.

    1980-10-01

    The Environmental Evaluation Group (EEG) is conducting an assessment of the radiological health risks to people from the Waste Isolation Pilot Plant (WIPP). As a part of this work, EEG is making an effort to improve the understanding of those geological issues concerning the WIPP site which may affect the radiological consequences of the proposed repository. One of the important geological issues to be resolved is the timing and the nature of the dissolution processes which may have affected the WIPP site. EEG organized a two-day conference of geological scientists, titled Geotechnical Considerations for Radiological Hazard Assessment of WIPP on January 17-18, 1980. During this conference, it was realized that a field trip to the site would further clarify the different views on the geological processes active at the site. The field trip of June 16-18, 1980 was organized for this purpose. This report provides a summary of the field trip activities along with the participants post field trip comments. Important field stops are briefly described, followed by a more detailed discussion of critical geological issues. The report concludes with EEG's summary and recommendations to the US Department of Energy for further information needed to more adequately resolve concerns for the geologic and hydrologic integrity of the site

  20. Round-trip boat on hydrogen

    International Nuclear Information System (INIS)

    Berends, A.M.; Van der Laag, P.C.

    2005-08-01

    The results of a feasibility study on a PEM (polymer-electrolyte membrane) fuel cell (FC) driven electric round-trip boat are presented and discussed. The study concerns the specification of a PEMFC system design, including a list of components. Also technical and environmental aspects are dealt with and compared with traditional battery-driven electric boats and diesel-driven boats [nl

  1. The Educational Value of Field Trips

    Science.gov (United States)

    Greene, Jay P.; Kisida, Brian; Bowen, Daniel H.

    2014-01-01

    The school field trip has a long history in American public education. For decades, students have piled into yellow buses to visit a variety of cultural institutions, including art, natural history, and science museums, as well as theaters, zoos, and historical sites. Schools gladly endured the expense and disruption of providing field trips…

  2. The Compensation Act 2006 and School Trips

    Science.gov (United States)

    Hunter-Jones, John

    2006-01-01

    The Compensation Act 2006 received its Royal Assent on 25 July 2006. The Act allows the courts to have regard to the social utility of "desirable activities", including school trips, in considering negligence claims. The article reviews the law of negligence as it affects teachers of the very young and considers the possible impact of…

  3. The SMS-GPS-Trip-Method

    DEFF Research Database (Denmark)

    Reinau, Kristian Hegner; Harder, Henrik; Weber, Michael

    2015-01-01

    This article presents a new method for collecting travel behavior data, based on a combination of GPS tracking and SMS technology, coined the SMS–GPS-Trip method. The state-of-the-art method for collecting data for activity based traffic models is a combination of travel diaries and GPS tracking...

  4. Microstructural Development during Welding of TRIP steels

    NARCIS (Netherlands)

    Amirthalingam, M.

    2010-01-01

    The Advanced High Strength Steels (AHSS) are promising solutions for the production of lighter automobiles which reduce fuel consumption and increase passenger safety by improving crash-worthiness. Transformation Induced Plasticity Steel (TRIP) are part of the advanced high strength steels which

  5. Abnormal Events for Emergency Trip in HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Guk Hun; Choi, M. J.; Park, S. I.; Kim, H. W.; Kim, S. J.; Park, J. H.; Kwon, I. C

    2006-12-15

    This report gathers abnormal events related to emergency trip of HANARO that happened during its operation over 10 years since the first criticality on February 1995. The collected examples will be utilized to the HANARO's operators as a useful guide.

  6. Automated evaluation of matrix elements between contracted wavefunctions: A Mathematica version of the FRODO program

    Science.gov (United States)

    Angeli, C.; Cimiraglia, R.

    2013-02-01

    A symbolic program performing the Formal Reduction of Density Operators (FRODO), formerly developed in the MuPAD computer algebra system with the purpose of evaluating the matrix elements of the electronic Hamiltonian between internally contracted functions in a complete active space (CAS) scheme, has been rewritten in Mathematica. New version : A program summaryProgram title: FRODO Catalogue identifier: ADV Y _v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVY_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3878 No. of bytes in distributed program, including test data, etc.: 170729 Distribution format: tar.gz Programming language: Mathematica Computer: Any computer on which the Mathematica computer algebra system can be installed Operating system: Linux Classification: 5 Catalogue identifier of previous version: ADV Y _v1_0 Journal reference of previous version: Comput. Phys. Comm. 171(2005)63 Does the new version supersede the previous version?: No Nature of problem. In order to improve on the CAS-SCF wavefunction one can resort to multireference perturbation theory or configuration interaction based on internally contracted functions (ICFs) which are obtained by application of the excitation operators to the reference CAS-SCF wavefunction. The previous formulation of such matrix elements in the MuPAD computer algebra system, has been rewritten using Mathematica. Solution method: The method adopted consists in successively eliminating all occurrences of inactive orbital indices (core and virtual) from the products of excitation operators which appear in the definition of the ICFs and in the electronic Hamiltonian expressed in the second quantization formalism. Reasons for new version: Some years ago we published in this journal a couple of papers [1, 2

  7. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Baker, Dan J.; Heindel, Jeff A. (Idaho Department of Fish and Game, Boise, ID)

    2003-12-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Oceanic and Atmospheric Administration at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Oceanic and Atmospheric Administration are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported separately. Captive broodstock program activities conducted between January 1, 2002 and December 31, 2002 for the hatchery element of the program are presented in this report. n 2002, 22 anadromous sockeye salmon returned to the Sawtooth Valley. Fifteen of these adults were captured at adult weirs located on the upper Salmon River and on Redfish Lake Creek. Seven of the anadromous sockeye salmon that returned were observed below the Sawtooth Fish Hatchery weir and allowed to migrate upstream volitionally (following the dismantling of the weir on September 30, 2002). All adult returns were released to Redfish Lake for natural spawning. Based on their marks, returning adult sockeye salmon originated from a variety of release options. Sixty-six females from brood year 1999 and 28 females from brood year 2000 captive broodstock groups were spawned at the Eagle Hatchery in 2002. Spawn pairings produced approximately 65

  8. Element Partition Trees For H-Refined Meshes to Optimize Direct Solver Performance. Part I: Dynamic Programming

    KAUST Repository

    AbouEisha, Hassan M.

    2017-07-13

    We consider a class of two-and three-dimensional h-refined meshes generated by an adaptive finite element method. We introduce an element partition tree, which controls the execution of the multi-frontal solver algorithm over these refined grids. We propose and study algorithms with polynomial computational cost for the optimization of these element partition trees. The trees provide an ordering for the elimination of unknowns. The algorithms automatically optimize the element partition trees using extensions of dynamic programming. The construction of the trees by the dynamic programming approach is expensive. These generated trees cannot be used in practice, but rather utilized as a learning tool to propose fast heuristic algorithms. In this first part of our paper we focus on the dynamic programming approach, and draw a sketch of the heuristic algorithm. The second part will be devoted to a more detailed analysis of the heuristic algorithm extended for the case of hp-adaptive

  9. Element Partition Trees For H-Refined Meshes to Optimize Direct Solver Performance. Part I: Dynamic Programming

    KAUST Repository

    AbouEisha, Hassan M.; Calo, Victor Manuel; Jopek, Konrad; Moshkov, Mikhail; Paszyńka, Anna; Paszyński, Maciej; Skotniczny, Marcin

    2017-01-01

    We consider a class of two-and three-dimensional h-refined meshes generated by an adaptive finite element method. We introduce an element partition tree, which controls the execution of the multi-frontal solver algorithm over these refined grids. We propose and study algorithms with polynomial computational cost for the optimization of these element partition trees. The trees provide an ordering for the elimination of unknowns. The algorithms automatically optimize the element partition trees using extensions of dynamic programming. The construction of the trees by the dynamic programming approach is expensive. These generated trees cannot be used in practice, but rather utilized as a learning tool to propose fast heuristic algorithms. In this first part of our paper we focus on the dynamic programming approach, and draw a sketch of the heuristic algorithm. The second part will be devoted to a more detailed analysis of the heuristic algorithm extended for the case of hp-adaptive

  10. The finite element part of the LAMCAL program. Elastic-plastic fracture mechanics applications

    International Nuclear Information System (INIS)

    Lamain, L.G.; Blanckenburg, J.F.G.

    1982-01-01

    The elastic-plastic FEM code described in this report is the third part of the Lamcal program of which the two other parts for mesh generating and plotting were presented previously. Also this part uses the dynamic core storage. All variables and problem defining data are stored in one common array-SPACE. If all three parts are used together, the same common-SPACE is reused in each part. The lay-out of the complete program is given. J-integral evaluation and plotting can be done immediately in the FE run or afterwards in a post processing run. Post processing is done within the FEM part with a reduced core space. Originally developed as a general code, the use of the present version is mainly focussed on research in the field of the fracture mechanics. Several J-integral routines are available as well as crack growth modelling by node release or stiffness reduction, energy calculations, crack tip elements, etc. In this report the theory is discussed and some sample problems are given. The theory is presented in two parts, the general FEM and the more specific EPFM theory. For the sample problems, a choice has been made to show the accuracy of the program under more or less severe loading conditions

  11. 49 CFR 655.12 - Required elements of an anti-drug use and alcohol misuse program.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Required elements of an anti-drug use and alcohol... and alcohol misuse program. An anti-drug use and alcohol misuse program shall include the following: (a) A statement describing the employer's policy on prohibited drug use and alcohol misuse in the...

  12. Retrofit breakers resolve trip failures

    International Nuclear Information System (INIS)

    Hanna, G.L.

    1995-01-01

    This articles examines how power plants can use advance planning and retrofit equipment to upgrade existing systems while avoiding unnecessary downtime. A break that fails to open challenges the safety features of a nuclear power plant. To ensure reliable operations, the utility selected a comprehensive retrofit program to replace a third of the 200 breakers originally installed at the Shearon Harris Nuclear Power Plant. Under contract, the retrofits--Siemens RLN breakers--were built and qualified for nuclear service by Wyle Laboratories through a special teaming agreement with Siemens Energy and Automation. The project offers an excellent example of how a utility can use advance planning and retrofit equipment to upgrade its existing systems while avoiding unnecessary downtime

  13. AN INTEGRATED MODELING FRAMEWORK FOR ENVIRONMENTALLY EFFICIENT CAR OWNERSHIP AND TRIP BALANCE

    Directory of Open Access Journals (Sweden)

    Tao FENG

    2008-01-01

    Full Text Available Urban transport emissions generated by automobile trips are greatly responsible for atmospheric pollution in both developed and developing countries. To match the long-term target of sustainable development, it seems to be important to specify the feasible level of car ownership and travel demand from environmental considerations. This research intends to propose an integrated modeling framework for optimal construction of a comprehensive transportation system by taking into consideration environmental constraints. The modeling system is actually a combination of multiple essential models and illustrated by using a bi-level programming approach. In the upper level, the maximization of both total car ownership and total number of trips by private and public travel modes is set as the objective function and as the constraints, the total emission levels at all the zones are set to not exceed the relating environmental capacities. Maximizing the total trips by private and public travel modes allows policy makers to take into account trip balance to meet both the mobility levels required by travelers and the environmentally friendly transportation system goals. The lower level problem is a combined trip distribution and assignment model incorporating traveler's route choice behavior. A logit-type aggregate modal split model is established to connect the two level problems. In terms of the solution method for the integrated model, a genetic algorithm is applied. A case study is conducted using road network data and person-trip (PT data collected in Dalian city, China. The analysis results showed that the amount of environmentally efficient car ownership and number of trips by different travel modes could be obtained simultaneously when considering the zonal control of environmental capacity within the framework of the proposed integrated model. The observed car ownership in zones could be increased or decreased towards the macroscopic optimization

  14. Microstructure characterization of Friction Stir Spot Welded TRIP steel

    DEFF Research Database (Denmark)

    Lomholt, Trine Colding; Adachi, Yoshitaka; Peterson, Jeremy

    2012-01-01

    Transformation Induced Plasticity (TRIP) steels have not yet been successfully joined by any welding technique. It is desirable to search for a suitable welding technique that opens up for full usability of TRIP steels. In this study, the potential of joining TRIP steel with Friction Stir Spot...

  15. Austenite stability in TRIP steels studied by synchrotron radiation

    NARCIS (Netherlands)

    Blondé, R.

    2014-01-01

    TRIP steel is a material providing great mechanical properties. Such steels show a good balance between high-strength and ductility, not only as a result of the fine microstructure, but also because of the well-known TRIP effect. The Transformation Induced-Plasticity (TRIP) phenomenon is the

  16. Probabilistic methods in a study of trip setpoints

    International Nuclear Information System (INIS)

    Kaulitz, D. E.

    2012-01-01

    Most early vintage Boiling Water Reactors have a high head and high capacity High Pressure Coolant Injection (HPCI) pump to keep the core covered following a loss of coolant accident (LOCA). However, the protection afforded by the HPCI pump for mitigating a LOCA introduces the potential that a spurious start of the HPCI pump could oversupply the reactor vessel and lead to an automatic trip of the main turbine due to high water level. A turbine trip and associated increase in moderator density could challenge the bases of fuel integrity operating limits. To prevent turbine trip during spurious operation of the HPCI pump, the reactor protection system includes instrumentation and logic to sense high water level and automatically trip the HPCI pump prior to reaching the turbine trip setpoint. This paper describes an analysis that was performed to determine if existing reactor vessel water level trip instrumentation, logic and setpoints result in a high probability that the HPCI pump will trip prior to actuation of the turbine trip. Using nominal values for the initial water level and for the HPCI pump and turbine trip setpoints, and using the probability distribution functions for measurement uncertainty in these setpoints, a Monte Carlo simulation was employed to determine probabilities of successfully tripping the HPCI pump prior to tripping of the turbine. The results of the analysis established that the existing setpoints, instrumentation and logic would be expected to reliably prevent a trip of the main turbine. (authors)

  17. Actual and Virtual Reality: Making the Most of Field Trips.

    Science.gov (United States)

    Bellan, Jennifer Marie; Scheurman, Geoffrey

    1998-01-01

    Argues that a virtual field trip can complement and enhance a real one. Discusses the benefits and pitfalls of both types of field trips. Outlines a series of student and teacher activities combining an actual field trip and a virtual one to Fort Snelling in St. Paul, Minnesota. (MJP)

  18. Development of RPS trip logic based on PLD technology

    International Nuclear Information System (INIS)

    Choi, Jong Gyun; Lee, Dong Young

    2012-01-01

    The majority of instrumentation and control (I and C) systems in today's nuclear power plants (NPPs) are based on analog technology. Thus, most existing I and C systems now face obsolescence problems. Existing NPPs have difficulty in repairing and replacing devices and boards during maintenance because manufacturers no longer produce the analog devices and boards used in the implemented I and C systems. Therefore, existing NPPs are replacing the obsolete analog I and C systems with advanced digital systems. New NPPs are also adopting digital I and C systems because the economic efficiencies and usability of the systems are higher than the analog I and C systems. Digital I and C systems are based on two technologies: a microprocessor based system in which software programs manage the required functions and a programmable logic device (PLD) based system in which programmable logic devices, such as field programmable gate arrays, manage the required functions. PLD based systems provide higher levels of performance compared with microprocessor based systems because PLD systems can process the data in parallel while microprocessor based systems process the data sequentially. In this research, a bistable trip logic in a reactor protection system (RPS) was developed using very high speed integrated circuits hardware description language (VHDL), which is a hardware description language used in electronic design to describe the behavior of the digital system. Functional verifications were also performed in order to verify that the bistable trip logic was designed correctly and satisfied the required specifications. For the functional verification, a random testing technique was adopted to generate test inputs for the bistable trip logic.

  19. Pengenalan Ababil: Program Finite Element Analysis (FEA 3-Dimensi Untuk Struktur Rangka-Batang

    Directory of Open Access Journals (Sweden)

    Sugeng Waluyo

    2011-02-01

    Full Text Available Ababil is an open source computer program working on the basis offinite element method (FEM which is aimed to analyze frame structures. It is mainly designed as a solver without embedded pre-or/and post-processing units. Recently, the solver is compatible only for reading and writing in the Gmsh [1] pre- and post-processing software environment. The FEM kinematics formulation applied here is relied on the Timoshenko Beam Theory (TBT using linear shape function. Finally, the well-known FEM software MSC.Nastranis used to ensure the capability of Ababil in the prediction of frame deformation by means of FEMsimulation

  20. Human Research Program Human Health Countermeasures Element Extravehicular Activity (EVA) Risk Standing Review Panel (SRP)

    Science.gov (United States)

    Norfleet, William; Harris, Bernard

    2009-01-01

    The Extravehicular Activity (EVA) Risk Standing Review Panel (SRP) was favorably impressed by the operational risk management approach taken by the Human Research Program (HRP) Integrated Research Plan (IRP) to address the stated life sciences issues. The life sciences community at the Johnson Space Center (JSC) seems to be focused on operational risk management. This approach is more likely to provide risk managers with the information they need at the time they need it. Concerning the information provided to the SRP by the EVA Physiology, Systems, and Performance Project (EPSP), it is obvious that a great deal of productive activity is under way. Evaluation of this information was hampered by the fact that it often was not organized in a fashion that reflects the "Gaps and Tasks" approach of the overall Human Health Countermeasures (HHC) effort, and that a substantial proportion of the briefing concerned subjects that, while interesting, are not part of the HHC Element (e.g., the pressurized rover presentation). Additionally, no information was provided on several of the tasks or how they related to work underway or already accomplished. This situation left the SRP having to guess at the efforts and relationship to other elements, and made it hard to easily map the EVA Project efforts currently underway, and the data collected thus far, to the gaps and tasks in the IRP. It seems that integration of the EPSP project into the HHC Element could be improved. Along these lines, we were concerned that our SRP was split off from the other participating SRPs at an early stage in the overall agenda for the meeting. In reality, the concerns of EPSP and other projects share much common ground. For example, the commonality of the concerns of the EVA and exercise physiology groups is obvious, both in terms of what reduced exercise capacity can do to EVA capability, and how the exercise performed during an EVA could contribute to an overall exercise countermeasure prescription.

  1. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 1997 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Kline, Paul A.; Heindel, Jeff A.; Willard, Catherine (Idaho Department of Fish and Game, Boise, ID)

    2003-08-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported under separate cover. Captive broodstock program activities conducted between January 1, 1997 and December 31, 1997 are presented in this report. One hundred twenty-six female sockeye salmon from one captive broodstock group were spawned at the Eagle Fish Hatchery in 1997. Successful spawn pairings produced approximately 148,781 eyed-eggs with a cumulative mean survival to eyed-egg rate of 57.3%. Approximately 361,600 sockeye salmon were released to Sawtooth basin waters in 1997. Reintroduction strategies included eyed-eggs (brood year 1997), presmolts (brood year 1996), and prespawn adults for volitional spawning (brood year 1994). Release locations included Redfish Lake, Alturas Lake, and Pettit Lake. During this reporting period, four broodstocks and two unique production groups were in culture at the Eagle Fish Hatchery. Two of the four broodstocks were incorporated into the 1997 spawning design, and one broodstock was terminated following

  2. Human Research Program Human Health Countermeasures Element Nutrition Risk Standing Review Panel

    Science.gov (United States)

    Bistrian, Bruce

    2009-01-01

    The Nutrition Risk Standing Review Panel (SRP) reviewed and discussed the specific gaps and tasks for the Human Health Countermeasures (HHC) Element related to nutrition identified in the Human Research Program (HRP) Integrated Research Plan. There was general consensus that the described gaps and proposed tasks were critical to future NASA mission success. The SRP acknowledged the high scientific quality of the work currently being undertaken by the Nutritional Biochemistry group under the direction of Dr. Scott Smith. In review of the entire HRP, four new gaps were identified that complement the Element's existing research activities. Given the limitations of ground-based analogs for many of the unique physiological and metabolic alterations in space, future studies are needed to quantify nutritional factors that change during actual space flight. In addition, future tasks should seek to better evaluate the time course of physiological and metabolic alterations during flight to better predict alterations during longer duration missions. Finally, given the recent data suggesting a potential role for increased inflammatory responses during space flight, the role of inflammation needs to be explored in detail, including the development of potential countermeasures and new ground based analogs, if this possibility is confirmed.

  3. Background and elements of the linkage between the Brazilian school feeding program and family farming.

    Science.gov (United States)

    Schwartzman, Flavia; Mora, Claudia Andrea Rodriguez; Bogus, Claudia Maria; Villar, Betzabeth Slater

    2017-12-18

    Since 2009, legislation of the National School Feeding Program of Brazil (PNAE) institutionalizes its linkage with family farming as it establishes the requirement that at least 30% out of the total financial resources allocated by the federal government to the states and municipalities for school feeding must be used in the purchase of products directly from this sector. This study analyzes the process of drafting this legislation, focusing on the elements related to the procurement from family farming, through a historical contextualization, and it also presents a graphical representation with the main elements of this linkage: its objectives, target population, actions implemented and expected results. Actors involved with the drafting of the legislation were interviewed. The analyses show that the procurement from family farming is a far-reaching initiative in terms of the concept, execution and results. It has also showed that a strong articulation between the actors and institutions of the different sectors involved is critical to its success. The education, agriculture, planning, procurement and civil society sectors should work articulately at national, state and local level. The results of this study demonstrate that initiatives like this, of institutional procurement from family farming, which are currently being implemented in several countries, constitute as an important strategy of food and nutrition security, for the fulfillment of the human right to adequate food and the promotion of long-term sustainable development.

  4. A Trip to the Statler Hilton Hotel. The Special Education Curriculum Series.

    Science.gov (United States)

    Kendall, Muriel

    A program designed for high school level work-study classes for students of limited mental ability presents specific curriculum methods and materials to teach information regarding positions available in the hotel industry. A field trip tour of the Boston Statler Hilton Hotel if the focal activity of the unit, and is accompanied by a history of…

  5. Propagation of the trip behavior in the VENUS vertex chamber

    International Nuclear Information System (INIS)

    Ohama, Taro; Yamada, Yoshikazu.

    1995-03-01

    The high voltage system of the VENUS vertex chamber occasionally trips by a discharge somewhere among cathode electrodes during data taking. This trip behavior induces often additional trips at other electrodes such as the skin and the grid electrodes in the vertex chamber. This propagation mechanism of trips is so complicated in this system related with multi-electrodes. Although the vertex chamber is already installed inside the VENUS detector and consequently the discharge is not able to observe directly, a trial to estimate the propagation has been done using only the information which appears around the trip circuits and the power supply of the vertex chamber. (author)

  6. SLIC: an interactive mesh generator for finite element and finite difference application programs

    International Nuclear Information System (INIS)

    Gerhard, M.A.; Greenlaw, R.C.

    1979-01-01

    Computers with extended memory, such as the CDC STAR 100 and the CRAY 1 with mega-word capacities, are greatly enlarging the size of finite element problems which can be solved. The cost of developing and testing large meshes can be prohibitive unless one uses a computer program for mesh generation and plotting. SLIC is an interactive mesh program which builds and plots 2- and 3-D continuum meshes from interactive terminal or disc input. The user inputs coordinates for certain key points and enters commands which complete the description of the geometry. Entire surfaces and volumes are then generated from the geometric skeleton. SLIC allows the user to correct input errors and saves the corrected command list for later reuse. The mesh can be plotted on a video display at any stage of development to evaluate the work in progress. Output is in the form of an input file to a user-selected computer code. Among the available output types are ADINA, SAP4, and NIKE2D. 11 figures

  7. Your private trips with Carlson Wagonlit Travel

    CERN Multimedia

    Carlson Wagonlit Travel

    2015-01-01

    Your Carlson Wagonlit Travel agency at CERN (building 62) also organizes private trips!     Do not hesitate to contact the “Tourism” team, at your disposal from Monday to Friday from 8:30 a.m. to 4:30 p.m. Phone: 72763. E-mail: cern@carlsonwagonlit.ch. Since 1 January 2015, everyone working at CERN benefits from lower booking fees.

  8. TRIPs Agreement, Important Multilateral WTO Treaty

    Directory of Open Access Journals (Sweden)

    Oana-Maria Florescu

    2006-08-01

    Full Text Available This article aims at presenting the content and the frame of the TRIPs. Agreement. It starts by introducing the reader to the terms that defined the world economical climate by the time of the Agreement negociation. Also, it explains the need of having an Agreement on intellectual property rights with impact on the business world. Moreover, the article reviews the main provisions of the Agreement and the most important intellectual property rights.

  9. PyTRiP - a toolbox and GUI for the proton/ion therapy planning system TRiP

    International Nuclear Information System (INIS)

    Toftegaard, J; Bassler, N; Petersen, J B

    2014-01-01

    Purpose: Only very few treatment planning systems (TPS) are capable of handling heavy ions. Commercial heavy ion TPS are costly and normally restrict the possibility to implement new functionalities. PyTRiP provides Python bindings and a platform-independent graphical user interface (GUI) for the heavy ion treatment program TRiP, and adds seamless support of DICOM files. We aim to provide a front-end for TRiP which does not require any special computer skills. Methods: PyTRiP is written in Python combined with C for fast computing. Routines for DICOM file import/export to TRiPs native file format are implemented. The GUI comes as an executable with all its dependencies including PyTRiP making it easy to install on Windows, Mac and Linux. Results: PyTRiP is a comprehensive toolbox for handling TRiP. Treatment plans are handled using an object oriented structure. Bindings to TRiP (which only runs on Linux, either locally or on a remote server) are performed through a single function call. GUI users can intuitively create treatment plans without much knowledge about the TRiP user interface. Advanced users still have full access to all TRiP functionality. The user interface comes with a comprehensive plotting tool, which can visualize 2D contours, volume histograms, as well as dose- and linear energy transfer (LET) distributions. Conclusion: We developed a powerful toolbox for ion therapy research using TRiP as backend. The corresponding GUI allows to easily and intuitively create, calculate and visualize treatment plans. TRiP is thereby more accessible and simpler to use.

  10. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 2004 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J.; Heindel, Jeff A.; Redding, Jeremy (Idaho Department of Fish and Game, Boise, ID)

    2006-05-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Oceanic and Atmospheric Administration at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Oceanic and Atmospheric Administration are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases (annual report to the Bonneville Power Administration for the research element of the program) are also reported separately. Captive broodstock program activities conducted between January 1, 2004 and December 31, 2004 for the hatchery element of the program are presented in this report. In 2004, twenty-seven anadromous sockeye salmon returned to the Sawtooth Valley. Traps on Redfish Lake Creek and the upper Salmon River at the Sawtooth Fish Hatchery intercepted one and four adults, respectively. Additionally, one adult sockeye salmon was collected at the East Fork Salmon River weir, 18 were seined from below the Sawtooth Fish Hatchery weir, one adult sockeye salmon was observed below the Sawtooth Fish Hatchery weir but not captured, and two adult sockeye salmon were observed in Little Redfish Lake but not captured. Fish were captured/collected between July 24 and September 14, 2004. The captured/collected adult sockeye salmon (12 females and 12 males) originated from a variety of release strategies and were transferred to

  11. NORIA-SP: A finite element computer program for analyzing liquid water transport in porous media

    International Nuclear Information System (INIS)

    Hopkins, P.L.; Eaton, R.R.; Bixler, N.E.

    1991-12-01

    A family of finite element computer programs has been developed at Sandia National Laboratories (SNL) most recently, NORIA-SP. The original NORIA code solves a total of four transport equations simultaneously: liquid water, water vapor, air, and energy. Consequently, use of NORIA is computer-intensive. Since many of the applications for which NORIA is used are isothermal, we decided to ''strip'' the original four-equation version, leaving only the liquid water equation. This single-phase version is NORIA-SP. The primary intent of this document is to provide the user of NORIA-SP an accurate user's manual. Consequently, the reader should refer to the NORIA manual if additional detail is required regarding the equation development and finite element methods used. The single-equation version of the NORIA code (NORIA-SP) has been used most frequently for analyzing various hydrological scenarios for the potential underground nuclear waste repository at Yucca Mountain in western Nevada. These analyses are generally performed assuming a composite model to represent the fractured geologic media. In this model the material characteristics of the matrix and the fractures are area weighted to obtain equivalent material properties. Pressure equilibrium between the matrix and fractures is assumed so a single conservation equation can be solved. NORIA-SP is structured to accommodate the composite model. The equations for water velocities in both the rock matrix and the fractures are presented. To use the code for problems involving a single, nonfractured porous material, the user can simply set the area of the fractures to zero

  12. ACCEPT: a three-dimensional finite element program for large deformation elastic-plastic-creep analysis of pressurized tubes (LWBR/AWBA Development Program)

    International Nuclear Information System (INIS)

    Hutula, D.N.; Wiancko, B.E.

    1980-03-01

    ACCEPT is a three-dimensional finite element computer program for analysis of large-deformation elastic-plastic-creep response of Zircaloy tubes subjected to temperature, surface pressures, and axial force. A twenty-mode, tri-quadratic, isoparametric element is used along with a Zircaloy materials model. A linear time-incremental procedure with residual force correction is used to solve for the time-dependent response. The program features an algorithm which automatically chooses the time step sizes to control the accuracy and numerical stability of the solution. A contact-separation capability allows modeling of interaction of reactor fuel rod cladding with fuel pellets or external supports

  13. The chemical monitoring and control during temporary turbine trip or reactor scram of nuclear power plant

    International Nuclear Information System (INIS)

    Liu Heng

    2012-01-01

    During normal operation, a malfunction of equipment or improper operation sometimes results in a turbine trip or reactor scram or even cold shutdown. Because present chemical control strategy and programs aimed at the situation of normal operation and planed refueling outage, no integrate emergency program of radiochemical and chemical control had been developed to focus on this urgent and unexpected situation. After many years of practice and experience feedback, chemists have created an emergency collaborative program of radiochemical and chemical control which aims at these unexpected situations such as unplanned unit down power, turbine trip, or reactor scram. The program defines different radiochemical and chemical control measures and steps during different status to monitor primary loop dose rate variation, fuel assembly integrity and water chemical excursion to prevent components from corrosion. (author)

  14. Program ELM: A tool for rapid thermal-hydraulic analysis of solid-core nuclear rocket fuel elements

    International Nuclear Information System (INIS)

    Walton, J.T.

    1992-11-01

    This report reviews the state of the art of thermal-hydraulic analysis codes and presents a new code, Program ELM, for analysis of fuel elements. ELM is a concise computational tool for modeling the steady-state thermal-hydraulics of propellant flow through fuel element coolant channels in a nuclear thermal rocket reactor with axial coolant passages. The program was developed as a tool to swiftly evaluate various heat transfer coefficient and friction factor correlations generated for turbulent pipe flow with heat addition which have been used in previous programs. Thus, a consistent comparison of these correlations was performed, as well as a comparison with data from the NRX reactor experiments from the Nuclear Engine for Rocket Vehicle Applications (NERVA) project. This report describes the ELM Program algorithm, input/output, and validation efforts and provides a listing of the code

  15. Effect of a three-month football training program on trace element ...

    African Journals Online (AJOL)

    Yomi

    2012-01-03

    Jan 3, 2012 ... physical exercise and trace element metabolism (Marrella et al., 1993; McDonald ..... induced stress and immune function. Exerc Immunol Rev. ... aerobic exercise upon the trace element levels in blood. Neuro. Endocrinol.

  16. The NASA research and technology program on space power: A key element of the Space Exploration Initiative

    Science.gov (United States)

    Bennett, Gary L.; Brandhorst, Henry W., Jr.; Atkins, Kenneth L.

    1991-01-01

    In July 1989, President Bush announced his space exploration initiative of going back to the Moon to stay and then going to Mars. Building upon its ongoing research and technology base, NASA has established an exploration technology program to develop the technologies needed for piloted missions to the Moon and Mars. A key element for the flights and for the planned bases is power. The NASA research and technology program on space power encompasses power sources, energy storage, and power management.

  17. Quantum biology at the cellular level--elements of the research program.

    Science.gov (United States)

    Bordonaro, Michael; Ogryzko, Vasily

    2013-04-01

    Quantum biology is emerging as a new field at the intersection between fundamental physics and biology, promising novel insights into the nature and origin of biological order. We discuss several elements of QBCL (quantum biology at cellular level) - a research program designed to extend the reach of quantum concepts to higher than molecular levels of biological organization. We propose a new general way to address the issue of environmentally induced decoherence and macroscopic superpositions in biological systems, emphasizing the 'basis-dependent' nature of these concepts. We introduce the notion of 'formal superposition' and distinguish it from that of Schroedinger's cat (i.e., a superposition of macroscopically distinct states). Whereas the latter notion presents a genuine foundational problem, the former one contradicts neither common sense nor observation, and may be used to describe cellular 'decision-making' and adaptation. We stress that the interpretation of the notion of 'formal superposition' should involve non-classical correlations between molecular events in a cell. Further, we describe how better understanding of the physics of Life can shed new light on the mechanism driving evolutionary adaptation (viz., 'Basis-Dependent Selection', BDS). Experimental tests of BDS and the potential role of synthetic biology in closing the 'evolvability mechanism' loophole are also discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  18. Finite element analysis program for shells of revolution: ISTRAN/SR, 4

    International Nuclear Information System (INIS)

    Chiba, Toshio

    1980-01-01

    The computational capabilities available in the current version of ISTRAN/SR for stress analysis of shells of revolution have been described in the 1st, 2nd and 3rd reports. This report describes the linear elastic dynamic analysis of shells of revolution under axisymmetric and asymmetric loadings. The shell, idealized as a curved element and cubic function for all displacements, is used. A method for solution of the equations of motion is described with special emphasis on the computational aspect of the solution. Three solution methods, which can be employed for the linear dynamic analysis, are possible - direct integration method, mode superposition method, and spectrum analysis method. Each method involves a numerical method which must be formulated in effective form for computer implementation - solution of linear equations, evaluation of eigenvalues and eigenvectors, and step-by-step numerical integration. In this program, the skyline method is employed for the solution of linear equations, and the subspace method and the determinant search method are employed for eigenproblem. The Newmark-Wilson method is employed for the step-by-step integration. The comparison of the solution of ISTRAN/SR and other numerical solution shows good agreement. (author)

  19. An Overview of the NASA Aviation Safety Program Propulsion Health Monitoring Element

    Science.gov (United States)

    Simon, Donald L.

    2000-01-01

    The NASA Aviation Safety Program (AvSP) has been initiated with aggressive goals to reduce the civil aviation accident rate, To meet these goals, several technology investment areas have been identified including a sub-element in propulsion health monitoring (PHM). Specific AvSP PHM objectives are to develop and validate propulsion system health monitoring technologies designed to prevent engine malfunctions from occurring in flight, and to mitigate detrimental effects in the event an in-flight malfunction does occur. A review of available propulsion system safety information was conducted to help prioritize PHM areas to focus on under the AvSP. It is noted that when a propulsion malfunction is involved in an aviation accident or incident, it is often a contributing factor rather than the sole cause for the event. Challenging aspects of the development and implementation of PHM technology such as cost, weight, robustness, and reliability are discussed. Specific technology plans are overviewed including vibration diagnostics, model-based controls and diagnostics, advanced instrumentation, and general aviation propulsion system health monitoring technology. Propulsion system health monitoring, in addition to engine design, inspection, maintenance, and pilot training and awareness, is intrinsic to enhancing aviation propulsion system safety.

  20. Real Students and Virtual Field Trips

    Science.gov (United States)

    de Paor, D. G.; Whitmeyer, S. J.; Bailey, J. E.; Schott, R. C.; Treves, R.; Scientific Team Of Www. Digitalplanet. Org

    2010-12-01

    Field trips have always been one of the major attractions of geoscience education, distinguishing courses in geology, geography, oceanography, etc., from laboratory-bound sciences such as nuclear physics or biochemistry. However, traditional field trips have been limited to regions with educationally useful exposures and to student populations with the necessary free time and financial resources. Two-year or commuter colleges serving worker-students cannot realistically insist on completion of field assignments and even well-endowed universities cannot take students to more than a handful of the best available field localities. Many instructors have attempted to bring the field into the classroom with the aid of technology. So-called Virtual Field Trips (VFTs) cannot replace the real experience for those that experience it but they are much better than nothing at all. We have been working to create transformative improvements in VFTs using four concepts: (i) self-drive virtual vehicles that students use to navigate the virtual globe under their own control; (ii) GigaPan outcrops that reveal successively more details views of key locations; (iii) virtual specimens scanned from real rocks, minerals, and fossils; and (iv) embedded assessment via logging of student actions. Students are represented by avatars of their own choosing and travel either together in a virtual field vehicle, or separately. When they approach virtual outcrops, virtual specimens become collectable and can be examined using Javascript controls that change magnification and orientation. These instructional resources are being made available via a new server under the domain name www.DigitalPlanet.org. The server will log student progress and provide immediate feedback. We aim to disseminate these resources widely and welcome feedback from instructors and students.

  1. Predictors of trips to food destinations

    Directory of Open Access Journals (Sweden)

    Kerr Jacqueline

    2012-05-01

    Full Text Available Abstract Background Food environment studies have focused on ethnic and income disparities in food access. Few studies have investigated distance travelled for food and did not aim to inform the geographic scales at which to study the relationship between food environments and obesity. Further, studies have not considered neighborhood design as a predictor of food purchasing behavior. Methods Atlanta residents (N = 4800 who completed a travel diary and reported purchasing or consuming food at one of five food locations were included in the analyses. A total of 11,995 food-related trips were reported. Using mixed modeling to adjust for clustering of trips by participants and households, person-level variables (e.g. demographics, neighborhood-level urban form measures, created in GIS, and trip characteristics (e.g. time of day, origin and destination were investigated as correlates of distance travelled for food and frequency of grocery store and fast food outlet trips. Results Mean travel distance for food ranged from 4.5 miles for coffee shops to 6.3 miles for superstores. Type of store, urban form, type of tour, day of the week and ethnicity were all significantly related to distance travelled for food. Origin and destination environment, type of tour, day of week, age, gender, income, ethnicity, vehicle access and obesity status were all significantly related to visiting a grocery store. Home neighborhood environment, day of week, type of tour, gender, income, education level, age, and obesity status were all significantly related to likelihood of visiting a fastfood outlet. Conclusions The present study demonstrated that people travel sizeable distances for food and this distance is related to urban. Results suggest that researchers need to employ different methods to characterize food environments than have been used to assess urban form in studies of physical activity. Food is most often purchased while traveling from locations other

  2. Hunton Group core workshop and field trip

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.S. [ed.

    1993-12-31

    The Late Ordovician-Silurian-Devonian Hunton Group is a moderately thick sequence of shallow-marine carbonates deposited on the south edge of the North American craton. This rock unit is a major target for petroleum exploration and reservoir development in the southern Midcontinent. The workshop described here was held to display cores, outcrop samples, and other reservoir-characterization studies of the Hunton Group and equivalent strata throughout the region. A field trip was organized to complement the workshop by allowing examination of excellent outcrops of the Hunton Group of the Arbuckle Mountains.

  3. Qualification program for JHR fuel elements: Irradiation of the first JHR test assembly in the BR2-Evita loop

    International Nuclear Information System (INIS)

    Anselmet, M.-C.; Lemoine, P.; Koonen, E.; Benoit, P.; Gouat, P.; Claes, W.; Geens, F.; Miras, G.; Brisson, S.

    2010-01-01

    An experimental program has been designed by CEA to qualify the behaviour of the JHR fuel under conditions representative of the reactor operating ones. This program uses the SCK.CEN facilities, irradiating JHR lead test elements in the BR2 reactor, inside its central channel which has been particularly arranged for this objective (Evita loop). As a first step in the program, a two cycle irradiation (4 weeks by cycle) started mid-July 2009 and ended mid-November (EVITA-1). After a cooling phase, this first JHR lead test element will be submitted to post-irradiation examination. The second JHR test element began its irradiation in the first quarter of 2010; its unloading is planned before the end of 2010, after 5 cycles in the BR2 reactor. The results of these two experiments are expected as input information for the Safety Authority Report. This paper presents the qualification program with the objectives assigned to each phase (irradiation, examination). A first interpretation of the irradiation data for the first element is presented, so as the information available on the progress of the following phases of the programme. (author)

  4. Investigation of Pre-Service Teachers' Opinions about Science in Terms of the Basic Elements of the Education Program

    Science.gov (United States)

    Sengul, Ozge Aydin

    2016-01-01

    The purpose of the current study is to investigate the pre-service teachers' opinions about science within the context of the basic elements of the education program, such as objectives, content, learning-teaching process and evaluation. The study was designed as a case study, one of the qualitative research methods. The participants of the study…

  5. 20 CFR 655.1111 - Element I-What hospitals are eligible to participate in the H-1C program?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Element I-What hospitals are eligible to participate in the H-1C program? 655.1111 Section 655.1111 Employees' Benefits EMPLOYMENT AND TRAINING... Internet website at http://www.access.gpo.gov. (d) To make a determination about information in the settled...

  6. Fail-safe logic elements for use with reactor safety systems

    International Nuclear Information System (INIS)

    Bobis, J.P.; McDowell, W.P.

    1976-01-01

    A complete fail-safe trip circuit is described which utilizes fail-safe logic elements. The logic elements used are analog multipliers and active bandpass filter networks. These elements perform Boolean operations on a set of AC signals from the output of a reactor safety-channel trip comparator

  7. Virtual garden computer program for use in exploring the elements of biodiversity people want in cities.

    Science.gov (United States)

    Shwartz, Assaf; Cheval, Helene; Simon, Laurent; Julliard, Romain

    2013-08-01

    Urban ecology is emerging as an integrative science that explores the interactions of people and biodiversity in cities. Interdisciplinary research requires the creation of new tools that allow the investigation of relations between people and biodiversity. It has been established that access to green spaces or nature benefits city dwellers, but the role of species diversity in providing psychological benefits remains poorly studied. We developed a user-friendly 3-dimensional computer program (Virtual Garden [www.tinyurl.com/3DVirtualGarden]) that allows people to design their own public or private green spaces with 95 biotic and abiotic features. Virtual Garden allows researchers to explore what elements of biodiversity people would like to have in their nearby green spaces while accounting for other functions that people value in urban green spaces. In 2011, 732 participants used our Virtual Garden program to design their ideal small public garden. On average gardens contained 5 different animals, 8 flowers, and 5 woody plant species. Although the mathematical distribution of flower and woody plant richness (i.e., number of species per garden) appeared to be similar to what would be expected by random selection of features, 30% of participants did not place any animal species in their gardens. Among those who placed animals in their gardens, 94% selected colorful species (e.g., ladybug [Coccinella septempunctata], Great Tit [Parus major], and goldfish), 53% selected herptiles or large mammals, and 67% selected non-native species. Older participants with a higher level of education and participants with a greater concern for nature designed gardens with relatively higher species richness and more native species. If cities are to be planned for the mutual benefit of people and biodiversity and to provide people meaningful experiences with urban nature, it is important to investigate people's relations with biodiversity further. Virtual Garden offers a standardized

  8. My Teacher got a Trip to Kitt Peak Observatory, but all I got was This Lousy Data CD: Lessons Learned in Optimizing a Teacher Professional Development Program for Solar Research

    Science.gov (United States)

    Walker, C. E.; Hill, F.; Plymate, C.

    2005-12-01

    The solar project in "Teacher Leaders in Research-Based Science Education" program provides the opportunity for teachers to study the Sun with the world's largest solar telescope. This exciting program is designed for middle and high school science teachers with more than 5 years experience teaching science. Funded by a National Science Foundation (NSF) Teacher Retention and Renewal grant, teachers learn how to acquire astronomy data and support their students in conducting authentic astronomy research projects. In addition, the program enhances their skills as leaders and mentors for those science teachers new to the profession. The TLRBSE program includes: 1) A 14-week online distance learning program with an emphasis on spectroscopy and data imaging; 2) A 2-week in-residence workshop at the National Optical Astronomy Observatory in Tucson, including several nights of research observing at a world-class observatory; 3) A program of ongoing mentoring support for beginning teachers; and 4) Partial funding to attend a national NSTA meeting with the mentees; 5) A journal to publish student and teacher research results and 6) Access to ongoing research, via further observing runs or archival data. Various factors have played a part in the evolution of the solar project. It began as an activity that used sunspots to measure the solar rotation rate. Then it progressed to a comparison of active regions (e.g., the areas of sunspots) at various wavelengths, to measuring the splitting of infrared spectral lines due to strong magnetic fields in active regions, and to measuring the amount of polarization due to weak magnetic fields. Challenges were presented as the project evolved from an activity to a hands-on observing experience fully reflecting the scientific research process. Some of the issues and trade-offs we will discuss are hands-on observing experience vs. remote observing, archival data retrieval vs. talking data, and more vs. less scientific assistance in the

  9. Doosan Experience on I and C Upgrade for Operating NPPs: Control Rod Control System and Automatic Seismic Trip System

    International Nuclear Information System (INIS)

    Nam, C.H.; Kim, K.H.; Lee, D.H.

    2012-01-01

    This paper describes DHIC's experience on upgrading 3 coil type control rod control system(CRCS), 4 coil type control element drive mechanism control system(CEDMCS) and automatic seismic trip system(ASTS). Common main feature of the above systems are full duplex system to prevent unwanted trip and mis-operation. 5 CRCS and CEDMCS have been supplied to Kori 1,2, Ulchin 1,2 and Younggwang 3 since 2010 and 7 CEDMCS are contracted to supply Korea Hydro and Nuclear Power Co.(KHNP) site. Also 16 ASTS are supplied and 12 ASTS will be supplied to operating and new NPPs within 3 years. (author)

  10. International Experience with Key Program Elements of IndustrialEnergy Efficiency or Greenhouse Gas Emissions Reduction Target-SettingPrograms

    Energy Technology Data Exchange (ETDEWEB)

    Price, Lynn; Galitsky, Christina; Kramer, Klaas Jan

    2008-02-02

    Target-setting agreements, also known as voluntary ornegotiated agreements, have been used by a number of governments as amechanism for promoting energy efficiency within the industrial sector. Arecent survey of such target-setting agreement programs identified 23energy efficiency or GHG emissions reduction voluntary agreement programsin 18 countries. International best practice related to target-settingagreement programs calls for establishment of a coordinated set ofpolicies that provide strong economic incentives as well as technical andfinancial support to participating industries. The key program elementsof a target-setting program are the target-setting process,identification of energy-saving technologies and measures usingenergy-energy efficiency guidebooks and benchmarking as well as byconducting energy-efficiency audits, development of an energy-savingsaction plan, development and implementation of energy managementprotocols, development of incentives and supporting policies, monitoringprogress toward targets, and program evaluation. This report firstprovides a description of three key target-setting agreement programs andthen describes international experience with the key program elementsthat comprise such programs using information from the three keytarget-setting programs as well as from other international programsrelated to industrial energy efficiency or GHG emissionsreductions.

  11. Providing Feedback, Orientation and Opportunities for Reflection as Key Elements for Successful Mentoring Programs: Reviewing a Program for Future Business Education Teachers

    Directory of Open Access Journals (Sweden)

    Elisabeth Riebenbauer

    2017-12-01

    Full Text Available The introduction to teaching is critical for novice teachers. Near the end of their master’s program, students of Business Education and Development in Austria spend one semester at an assigned school. They are introduced to teaching, while being assisted by peer students, mentoring teachers, and a companion course. Mentors receive special training and preparation in advance, thus contributing to a high quality mentoring program. The program is organized threefold: (1 providing feedback, (2 opportunities for reflection and (3 career orientation. The purpose of this paper is to assess key elements of successful mentoring programs and to question which competences of mentors contribute most to the success of those programs. Between 2012 and 2015, 188 persons (student teachers and their mentors responded to an online survey at the end of their mentoring program. Additionally, data from a study (1,245 questionnaires regarding the student teachers’ perception of their own competence was utilized, allowing for a comparison of student teacher confidence in their abilities before and after the mentoring program. The present results provide insight into the key elements of successful mentoring programs; both from a student teacher’s and mentor’s perspective. During the semester, students showed an increase regarding their self-perception of their professional competences. It was found that students and mentoring teachers valued feedback after each lesson more than feedback in regular meetings. Opportunities for reflection (e.g. exchange with peer students, learning diaries were considered helpful. The mentoring program helped students to decide whether to become a teacher or not.

  12. Safety aspects of unplanned shutdowns and trips

    International Nuclear Information System (INIS)

    1986-05-01

    The issue of unplanned shutdowns and trips is receiving increased attention worldwide in view of its importance to plant safety and availability. There exists significant variation in the number of forced shutdowns for nuclear power plants of the same type operating worldwide. The reduction of the frequency of these events will have safety benefits in terms of reducing the frequency of plant transients and the challenges to the safety systems, and the risks of possible incidents. This report provides an insight into the causes of unplanned shutdowns experienced in operating nuclear power plants worldwide, the good practices that have been found effective in minimizing their occurrence, and the measures that have been taken to reduce these events. Specific information on the experiences, approaches and practices of some countries in dealing with this issue is presented in Appendix A

  13. Phantom inflation and the 'Big Trip'

    International Nuclear Information System (INIS)

    Gonzalez-Diaz, Pedro F.; Jimenez-Madrid, Jose A.

    2004-01-01

    Primordial inflation is regarded to be driven by a phantom field which is here implemented as a scalar field satisfying an equation of state p=ωρ, with ω-1. Being even aggravated by the weird properties of phantom energy, this will pose a serious problem with the exit from the inflationary phase. We argue, however, in favor of the speculation that a smooth exit from the phantom inflationary phase can still be tentatively recovered by considering a multiverse scenario where the primordial phantom universe would travel in time toward a future universe filled with usual radiation, before reaching the big rip. We call this transition the 'Big Trip' and assume it to take place with the help of some form of anthropic principle which chooses our current universe as being the final destination of the time transition

  14. Elements to be considered in planning heavy ion fusion program: a summary

    International Nuclear Information System (INIS)

    Bohachevsky, I.O.

    1978-01-01

    A summary of Battelle's Engineering Development Program Plan for inertial confinement fusion is presented. Included are development objectives, facilities to achieve these objectives, program strategies, and a discussion of heavy-ion driver development

  15. Assessment of vehicle trip production rates in Ilorin (Nigeria) | Jimoh ...

    African Journals Online (AJOL)

    Occupation, age, gender, income lev-el, vehicle ownership, trip length and fare structure affected the total trip generation, with an average production rate of 3.5, in the range of 2.79 - 4.29. The lower rate was characteristic of school children (5 - 15 years), while the highest rate was attributed to affluent and elderly persons ...

  16. Reevaluation of steam generator level trip set point

    Energy Technology Data Exchange (ETDEWEB)

    Shim, Yoon Sub; Soh, Dong Sub; Kim, Sung Oh; Jung, Se Won; Sung, Kang Sik; Lee, Joon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-06-01

    The reactor trip by the low level of steam generator water accounts for a substantial portion of reactor scrams in a nuclear plant and the feasibility of modification of the steam generator water level trip system of YGN 1/2 was evaluated in this study. The study revealed removal of the reactor trip function from the SG water level trip system is not possible because of plant safety but relaxation of the trip set point by 9 % is feasible. The set point relaxation requires drilling of new holes for level measurement to operating steam generators. Characteristics of negative neutron flux rate trip and reactor trip were also reviewed as an additional work. Since the purpose of the trip system modification for reduction of a reactor scram frequency is not to satisfy legal requirements but to improve plant performance and the modification yields positive and negative aspects, the decision of actual modification needs to be made based on the results of this study and also the policy of a plant owner. 37 figs, 6 tabs, 14 refs. (Author).

  17. Influence of Field Trip on the Development of Students Interest ...

    African Journals Online (AJOL)

    Result of the study showed that; field trip increased students' interest towards studying fine and applied art theory and practicals. Male interest towards studying fine and applied art after embarking on field trip is slightly higher than their female counterpart but the difference is not significant at 0.05 alpha level under 56 ...

  18. Elementary school children's science learning from school field trips

    Science.gov (United States)

    Glick, Marilyn Petty

    This research examines the impact of classroom anchoring activities on elementary school students' science learning from a school field trip. Although there is prior research demonstrating that students can learn science from school field trips, most of this research is descriptive in nature and does not examine the conditions that enhance or facilitate such learning. The current study draws upon research in psychology and education to create an intervention that is designed to enhance what students learn from school science field trips. The intervention comprises of a set of "anchoring" activities that include: (1) Orientation to context, (2) Discussion to activate prior knowledge and generate questions, (3) Use of field notebooks during the field trip to record observations and answer questions generated prior to field trip, (4) Post-visit discussion of what was learned. The effects of the intervention are examined by comparing two groups of students: an intervention group which receives anchoring classroom activities related to their field trip and an equivalent control group which visits the same field trip site for the same duration but does not receive any anchoring classroom activities. Learning of target concepts in both groups was compared using objective pre and posttests. Additionally, a subset of students in each group were interviewed to obtain more detailed descriptive data on what children learned through their field trip.

  19. User oriented trajectory search for trip recommendation

    KAUST Repository

    Shang, Shuo

    2012-01-01

    Trajectory sharing and searching have received significant attentions in recent years. In this paper, we propose and investigate a novel problem called User Oriented Trajectory Search (UOTS) for trip recommendation. In contrast to conventional trajectory search by locations (spatial domain only), we consider both spatial and textual domains in the new UOTS query. Given a trajectory data set, the query input contains a set of intended places given by the traveler and a set of textual attributes describing the traveler\\'s preference. If a trajectory is connecting/close to the specified query locations, and the textual attributes of the trajectory are similar to the traveler\\'e preference, it will be recommended to the traveler for reference. This type of queries can bring significant benefits to travelers in many popular applications such as trip planning and recommendation. There are two challenges in the UOTS problem, (i) how to constrain the searching range in two domains and (ii) how to schedule multiple query sources effectively. To overcome the challenges and answer the UOTS query efficiently, a novel collaborative searching approach is developed. Conceptually, the UOTS query processing is conducted in the spatial and textual domains alternately. A pair of upper and lower bounds are devised to constrain the searching range in two domains. In the meantime, a heuristic searching strategy based on priority ranking is adopted for scheduling the multiple query sources, which can further reduce the searching range and enhance the query efficiency notably. Furthermore, the devised collaborative searching approach can be extended to situations where the query locations are ordered. The performance of the proposed UOTS query is verified by extensive experiments based on real and synthetic trajectory data in road networks. © 2012 ACM.

  20. SANTOS - a two-dimensional finite element program for the quasistatic, large deformation, inelastic response of solids

    Energy Technology Data Exchange (ETDEWEB)

    Stone, C.M.

    1997-07-01

    SANTOS is a finite element program designed to compute the quasistatic, large deformation, inelastic response of two-dimensional planar or axisymmetric solids. The code is derived from the transient dynamic code PRONTO 2D. The solution strategy used to compute the equilibrium states is based on a self-adaptive dynamic relaxation solution scheme, which is based on explicit central difference pseudo-time integration and artificial mass proportional damping. The element used in SANTOS is a uniform strain 4-node quadrilateral element with an hourglass control scheme to control the spurious deformation modes. Finite strain constitutive models for many common engineering materials are included. A robust master-slave contact algorithm for modeling sliding contact is implemented. An interface for coupling to an external code is also provided. 43 refs., 22 figs.

  1. Burn-Up Calculation of the Fuel Element in RSG-GAS Reactor using Program Package BATAN-FUEL

    International Nuclear Information System (INIS)

    Mochamad Imron; Ariyawan Sunardi

    2012-01-01

    Calculation of burn lip distribution of 2.96 gr U/cc Silicide fuel element at the 78 th reactor cycle using computer code program of BATAN-FUEL has been done. This calculation uses inputs such as generated power, operation time and a core assumption model of 5/1. Using this calculation model burn up for the entire fuel elements at the reactor core are able to be calculated. From the calculation it is obtained that the minimum burn up of 6.82% is RI-50 at the position of A-9, while the maximum burn up of 57.57% is RI 467 at the position of 8-7. Based on the safety criteria as specified in the Safety Analysis Report (SAR) RSG-GAS reactor, the maximum fuel burn up allowed is 59.59%. It then can be concluded that pattern that elements placement at the reactor core are properly and optimally done. (author)

  2. U.S. Department of Energy Office of Science Heavy Elements Program. Final Report

    International Nuclear Information System (INIS)

    Clark. S. B.; Ewing, R.

    2005-01-01

    In our first funding cycle, much time was spent developing protocols for characterizing and working with samples containing transuranium isotopes and obtaining preliminary experimental data on non-f-element systems

  3. Program package for calculating matrix elements of two-cluster structures in nuclei

    International Nuclear Information System (INIS)

    Krivec, R.; Mihailovic, M.V.; Kernforschungszentrum Karlsruhe G.m.b.H.

    1982-01-01

    Matrix elements of operators between Slater determinants of two-cluster structures must be expanded into partial waves for the purpose of angular momentum projection. The expansion coefficients contain integrals over the spherical angles theta and phi. (orig.)

  4. HOW DO YOUNG PEOPLE SELECT INFORMATION TO PLAN A TRIP

    Directory of Open Access Journals (Sweden)

    Oana ŢUGULEA

    2013-12-01

    Full Text Available The purpose of the research is to reveal the young tourists preferences in the process of planning a trip. Sources of information used, the utility of Internet/travel agencies in planning travel trip activities, preferred means of transportation and types of accommodation are investigated. As research methods, there used both qualitative and quantitative methods: focus group and survey. Internet is more used by young tourists in planning trips than travel agencies are. Internet is considered more useful in the documentation stage and when buying airline tickets. Young tourists are more influenced by friends when planning a trip. Young tourists prefer cars and planes as means of transportation for a trip and hotels and guesthouses as accommodation when traveling.

  5. Trip attraction rates of shopping centers in Northern New Castle County, Delaware.

    Science.gov (United States)

    2004-07-01

    This report presents the trip attraction rates of the shopping centers in Northern New : Castle County in Delaware. The study aims to provide an alternative to ITE Trip : Generation Manual (1997) for computing the trip attraction of shopping centers ...

  6. High-uranium-loaded U3O8-Al fuel element development program [contributed by N.M. Martin, ORNL

    International Nuclear Information System (INIS)

    Martin, M.M.

    1993-01-01

    The High-Uranium-Loaded U 3 O 8 -Al Fuel Element Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages. The specific objective of the program is to develop the technological and engineering data base for U 3 O 8 -Al plate-type fuel elements of maximal uranium content to the point of vendor qualification for full scale fabrication on a production basis. A program and management plan that details the organization, supporting objectives, schedule, and budget is in place and preparation for fuel and irradiation studies is under way. The current programming envisions a program of about four years duration for an estimated cost of about two million dollars. During the decades of the fifties and sixties, developments at Oak Ridge National Laboratory led to the use of U 3 O 8 -Al plate-type fuel elements in the High Flux Isotope Reactor, Oak Ridge Research Reactor, Puerto Rico Nuclear Center Reactor, and the High Flux Beam Reactor. Most of the developmental information however applies only up to a uranium concentration of about 55 wt % (about 35 vol % U 3 O 8 ). The technical issues that must be addressed to further increase the uranium loading beyond 55 wt % involve plate fabrication phenomena of voids and dogboning, fuel behavior under long irradiation, and potential for the thermite reaction between U 3 O 8 and aluminum. (author)

  7. FUDA MOD-2: a computer program for simulation the performance of fuel element validation exercise

    International Nuclear Information System (INIS)

    Chouhan, S.K.; Tripathi, R.M.; Prasad, P.N.; Chauhan, Ashok

    2014-01-01

    The PHWR fuel element performance is evaluated using the fuel analysis computer code FUDA MOD2. It is specifically written for performance simulation of UO 2 fuel pellet, located in zirconium alloy sheath operating under coolant pressure. For specific element power histories, the code investigates the variables and their interactions that govern fuel element performance. The input data requires pellet dimensions, element dimensions, sheath properties, heat transfer data, thermal hydraulic parameters of coolant, the inner filler gas composition, flux gradient and linear heat ratings (LHR) at different burn up. The output data generated by the code are radial temperature profile of fuel and sheath, fuel sheath-gap heat transfer coefficient, fission gas generated and released, fission gas pressure, sheath stress and strain for different burn-up zones. The code has been verified against literature data and post irradiation examinations carried out. It is also bench marked against various international fuel element simulation programmes available with water cooled reactors operating countries. The present paper describes the FUDA MOD2 code verification studies carried out using the literature data and post irradiation examination data. (author)

  8. Sentinel-3 SAR Altimetry Toolbox - Scientific Exploitation of Operational Missions (SEOM) Program Element

    Science.gov (United States)

    Benveniste, Jérôme; Lucas, Bruno; Dinardo, Salvatore

    2014-05-01

    The prime objective of the SEOM (Scientific Exploitation of Operational Missions) element is to federate, support and expand the large international research community that the ERS, ENVISAT and the Envelope programmes have build up over the last 20 years for the future European operational Earth Observation missions, the Sentinels. Sentinel-3 builds directly on a proven heritage pioneered by ERS-1, ERS-2, Envisat and CryoSat-2, with a dual-frequency (Ku and C band) advanced Synthetic Aperture Radar Altimeter (SRAL) that provides measurements at a resolution of ~300m in SAR mode along track. Sentinel-3 will provide exact measurements of sea-surface height along with accurate topography measurements over sea ice, ice sheets, rivers and lakes. The first of the Sentinel-3 series is planned for launch in early 2015. The current universal altimetry toolbox is BRAT (Basic Radar Altimetry Toolbox) which can read all previous and current altimetry mission's data, but it does not have the capabilities to read the upcoming Sentinel-3 L1 and L2 products. ESA will endeavour to develop and supply this capability to support the users of the future Sentinel-3 SAR Altimetry Mission. BRAT is a collection of tools and tutorial documents designed to facilitate the processing of radar altimetry data. This project started in 2005 from the joint efforts of ESA (European Space Agency) and CNES (Centre National d'Etudes Spatiales, the French Space Agency), and it is freely available at http://earth.esa.int/brat. The tools enable users to interact with the most common altimetry data formats, the BratGUI is the front-end for the powerful command line tools that are part of the BRAT suite. BRAT can also be used in conjunction with Matlab/IDL (via reading routines) or in C/C++/Fortran via a programming API, allowing the user to obtain desired data, bypassing the data-formatting hassle. BRAT can be used simply to visualise data quickly, or to translate the data into other formats such as net

  9. 10 CFR Appendix D to Part 436 - Energy Program Conservation Elements

    Science.gov (United States)

    2010-01-01

    ... have a personal and sustained commitment to the program, provide active direction and motivation, and... energy conservation. (7) Employee Awareness. Employees must gain an awareness of energy conservation through formal training and employee information programs. They should be invited to participate in the...

  10. Concentrations of Elements in Hellbender Blood and Fish Fillets from the Missouri Department of Conservation Monitoring Programs

    Science.gov (United States)

    May, Thomas W.; Walther, Mike J.; Brumbaugh, William G.

    2007-01-01

    This report presents the results of contaminant monitoring surveys conducted annually by the Missouri Department of Conservation to examine the levels of selected elemental contaminants in hellbender (Cryptobranchus alleganiensis) blood and fish. Catfish (Ictalurus furcatus, Ictalurus punctatus, Pylodictis olivaris), redhorse (Moxostoma anisorum, Moxostoma erythrurum), bass (Micropterus salmoides, Micropterus punctulatus, Micropterus Lacepede, Ambloplites rupestris), walleye (Sander vitreus), and sunfish (Lepomis megalotis) were collected from 17 sites as part of the Department's General Contaminant Monitoring Program. Bluegill (Lepomis macrochirus) and other sunfish (Lepomis megalotis, Lepomis cyanellus) were collected from 18 sites as part of the Department's Resource Assessment and Monitoring Program. Blood from hellbenders was collected from seven sites as part of the Department's Hellbender Monitoring Program.

  11. Flow in Rotating Serpentine Coolant Passages With Skewed Trip Strips

    Science.gov (United States)

    Tse, David G.N.; Steuber, Gary

    1996-01-01

    Laser velocimetry was utilized to map the velocity field in serpentine turbine blade cooling passages with skewed trip strips. The measurements were obtained at Reynolds and Rotation numbers of 25,000 and 0.24 to assess the influence of trips, passage curvature and Coriolis force on the flow field. The interaction of the secondary flows induced by skewed trips with the passage rotation produces a swirling vortex and a corner recirculation zone. With trips skewed at +45 deg, the secondary flows remain unaltered as the cross-flow proceeds from the passage to the turn. However, the flow characteristics at these locations differ when trips are skewed at -45 deg. Changes in the flow structure are expected to augment heat transfer, in agreement with the heat transfer measurements of Johnson, et al. The present results show that trips are skewed at -45 deg in the outward flow passage and trips are skewed at +45 deg in the inward flow passage maximize heat transfer. Details of the present measurements were related to the heat transfer measurements of Johnson, et al. to relate fluid flow and heat transfer measurements.

  12. Risk assessment to determine the advisability of seismic trip systems

    International Nuclear Information System (INIS)

    Cummings, G.E.; Wells, J.E.

    1977-01-01

    Seismic trip (scram) systems have been used for many years on certain research, test, and production reactors, but not on commercial power reactors. An assessment is made of the risks associated with the presence and absence of such trip systems on power reactors. An attempt was made to go beyond the reactor per se and to consider the risks to society as a whole; for example, the advantages of tripping to avoid an earthquake-caused accident were weighed against the disadvantages associated with interrupting electric power in a time when it would be needed for emergency services. The comparative risk assessment was performed by means of fault tree analysis

  13. Analysis of Freight Trip Generation Model for Food and Beverage in Belo Horizonte (Brazil

    Directory of Open Access Journals (Sweden)

    Leise Kelli de Oliveira

    2017-01-01

    Full Text Available Today, one of the main challenges faced in urban logistics is the distribution of goods. In Brazil, mid to large cities have experienced consequences of unplanned urban sprawl and lack of adequate transportation infrastructure. The relationship between urban planning and transport stands out the attractiveness of some urban activities with direct impacts on the movement of people and goods and other component elements of urban space. The segment of bars and restaurants falls within this context, therefore is a vital activity responsible for significant percentage of jobs and revenue in a city. Altogether, foods & beverages commercial activities move daily large volumes of goods to meet the need of customers. This paper presents the results of a freight trip generation model developed for pubs and restaurants in Belo Horizonte (Brazil. Once performed the model determined the number of trips generated per day per establishment. In order to expand the discrete result to a continuous one, the results were geographically interpolated to a continuous surface and extrapolated within the city limits. The data for the freight trip generation model were obtained by survey. For this, we designed a structured questionnaire to obtain information about goods, frequency, operational time, place of performance of the loading/unloading of goods, establishment size and the number of employees. Besides these information, we investigated the acceptance of alternative practices in the delivery of goods, such as off-peak delivery. To accomplish the proposed models, we applied a simple linear regression, correlating the following variables: (i Number of trips versus area of the establishment; (ii Number of trips versus number of employees; (iii Number of trips versus operation day of the establishment. With the results of the linear regression for travel generations, conducted the data interpolation based on the standard deviation of the results to define the sample

  14. Boiling water reactor turbine trip (TT) benchmark

    International Nuclear Information System (INIS)

    2005-01-01

    In the field of coupled neutronics/thermal-hydraulics computation there is a need to enhance scientific knowledge in order to develop advanced modelling techniques for new nuclear technologies and concepts as well as for current applications. Recently developed 'best-estimate' computer code systems for modelling 3-D coupled neutronics/thermal-hydraulics transients in nuclear cores and for coupling core phenomena and system dynamics (PWR, BWR, VVER) need to be compared against each other and validated against results from experiments. International benchmark studies have been set up for this purpose. The present report is the second in a series of four and summarises the results of the first benchmark exercise, which identifies the key parameters and important issues concerning the thermalhydraulic system modelling of the transient, with specified core average axial power distribution and fission power time transient history. The transient addressed is a turbine trip in a boiling water reactor, involving pressurization events in which the coupling between core phenomena and system dynamics plays an important role. In addition, the data made available from experiments carried out at the Peach Bottom 2 reactor (a GE-designed BWR/4) make the present benchmark particularly valuable. (author)

  15. Boiling water reactor turbine trip (TT) benchmark

    International Nuclear Information System (INIS)

    2001-06-01

    In the field of coupled neutronics/thermal-hydraulics computation there is a need to enhance scientific knowledge in order to develop advanced modelling techniques for new nuclear technologies and concepts, as well as for current nuclear applications Recently developed 'best-estimate' computer code systems for modelling 3-D coupled neutronics/thermal-hydraulics transients in nuclear cores and for the coupling of core phenomena and system dynamics (PWR, BWR, VVER) need to be compared against each other and validated against results from experiments. International benchmark studies have been set up for the purpose. The present volume describes the specification of such a benchmark. The transient addressed is a turbine trip (TT) in a BWR involving pressurization events in which the coupling between core phenomena and system dynamics plays an important role. In addition, the data made available from experiments carried out at the plant make the present benchmark very valuable. The data used are from events at the Peach Bottom 2 reactor (a GE-designed BWR/4). (authors)

  16. Continuous Modeling Technique of Fiber Pullout from a Cement Matrix with Different Interface Mechanical Properties Using Finite Element Program

    Directory of Open Access Journals (Sweden)

    Leandro Ferreira Friedrich

    Full Text Available Abstract Fiber-matrix interface performance has a great influence on the mechanical properties of fiber reinforced composite. This influence is mainly presented during fiber pullout from the matrix. As fiber pullout process consists of fiber debonding stage and pullout stage which involve complex contact problem, numerical modeling is a best way to investigate the interface influence. Although many numerical research works have been conducted, practical and effective technique suitable for continuous modeling of fiber pullout process is still scarce. The reason is in that numerical divergence frequently happens, leading to the modeling interruption. By interacting the popular finite element program ANSYS with the MATLAB, we proposed continuous modeling technique and realized modeling of fiber pullout from cement matrix with desired interface mechanical performance. For debonding process, we used interface elements with cohesive surface traction and exponential failure behavior. For pullout process, we switched interface elements to spring elements with variable stiffness, which is related to the interface shear stress as a function of the interface slip displacement. For both processes, the results obtained are very good in comparison with other numerical or analytical models and experimental tests. We suggest using the present technique to model toughening achieved by randomly distributed fibers.

  17. Architecture and program structures for a special purpose finite element computer

    Energy Technology Data Exchange (ETDEWEB)

    Norrie, D.H.; Norrie, C.W.

    1983-01-01

    The development of very large scale integration (VLSI) has made special-purpose computers economically possible. With such a machine, the loss of flexibility compared with a general-purpose computer can be offset by the increased speed which can be obtained by tailoring the architecture to the particular problem or class of problem. The first kind of special-purpose machine has its architecture modelled on the physical structure of the problem and the second kind has its design tailored to the computational algorithm used. The parallel finite element machine (PARFEM) being designed at the University of Calgary for the solution of finite element problems is of the second kind. Its conceptual design is described and progress to date outlined. 14 references.

  18. Transplutonium elements production program: extraction chromatographic process for plutonium irradiated targets

    International Nuclear Information System (INIS)

    Bourges, J.; Madic, C.; Koehly, G.

    1980-01-01

    The treatment of irradiated plutonium targets by extraction chromatography allowed the purification of the isotopes 243 Am and 244 Cm on the scale of few tens of grams. This process proved to be extremely simple and flexible, and yielded results which are reproducible in time. The chief advantage of the TBP process over the HDEHP process in high and medium activity conditions lies in the rapid absorption/desorption kinetics of the elements to be purified and in the separation of americium from curium, which largely offsets its lower selectivity for lanthanide elements. it is certainly possible to improve the performance of this process by: a) optimization of the characteristics of the stationary phase, b) improvement in the filling technique and in hydraulic operation of the columns, c) on-line analysis of americium (the key element in actinide/lanthanide separation) in the eluate. The application of extraction chromatography with HD(DiBM)P to the purification of 243 Am of the end of treatment makes the process more consistent, eliminates the delicate stages implemented in hot cell, and considerably improves final product quality

  19. Basic Program Elements for Federal employee Occupational Safety and Health Programs and related matters; Subpart I for Recordkeeping and Reporting Requirements. Final rule.

    Science.gov (United States)

    2013-08-05

    OSHA is issuing a final rule amending the Basic Program Elements to require Federal agencies to submit their occupational injury and illness recordkeeping information to the Bureau of Labor Statistics (BLS) and OSHA on an annual basis. The information, which is already required to be created and maintained by Federal agencies, will be used by BLS to aggregate injury and illness information throughout the Federal government. OSHA will use the information to identify Federal establishments with high incidence rates for targeted inspection, and assist in determining the most effective safety and health training for Federal employees. The final rule also interprets several existing basic program elements in our regulations to clarify requirements applicable to Federal agencies, amends the date when Federal agencies must submit to the Secretary of Labor their annual report on occupational safety and health programs, amends the date when the Secretary of Labor must submit to the President the annual report on Federal agency safety and health, and clarifies that Federal agencies must include uncompensated volunteers when reporting and recording occupational injuries and illnesses.

  20. Hawaii Longline Fishery Trip Expenditure (2004 to present)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a time-series dataset of trip expenditure data for the Hawaii-based longline fleet for the period August 2004 to present. The data collection includes 10...

  1. ITE Trip Generation Modification Factors for Louisiana : Research Project Capsule

    Science.gov (United States)

    2017-12-01

    Using data from studies conducted in the United States over the last 50-60 years, the Institute of Transportation Engineers (ITE) has published trip generation rates for different land uses. Over time, observations from new studies have been incorpor...

  2. American Samoa Longline Fishery Trip Expenditure (2006 to present)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a time-series dataset for trip expenditure data for the American Samoa-based longline fleet from August 2006 to present. The dataset includes 10 variable...

  3. Astronaut Neil Armstrong studies rock samples during geological field trip

    Science.gov (United States)

    1969-01-01

    Astronaut Neil Armstrong, commander of the Apollo 11 lunar landing mission, studies rock samples during a geological field trip to the Quitman Mountains area near the Fort Quitman ruins in far west Texas.

  4. Senior travelers' trip chaining behavior : survey results and data analysis.

    Science.gov (United States)

    2011-08-01

    The research team conducted a survey of travel and activity scheduling behavior to better understand senior : citizens trip chaining behavior in the Chicago metropolitan areas most populous counties. The team used an : internet-based, prompted ...

  5. Snake River sockeye salmon captive broodstock program: hatchery element: annual progress report, 2000.; ANNUAL

    International Nuclear Information System (INIS)

    Kline, Paul A.; Willard, Catherine

    2001-01-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases are also reported under separate cover. Captive broodstock program activities conducted between January 1, 2000 and December 31, 2000 are presented in this report

  6. The innovation element of the diploma (b.eng.) programs at DTU

    DEFF Research Database (Denmark)

    Nyborg, Mads; Christiansen, Nynne Budtz

    2016-01-01

    Diploma) and the Technical University of Denmark. The most significant new activity in the programs is the introduction of a common 10 ECTS compulsory course in innovation in the later part of the programs. The idea behind this course is to give students the opportunity to collaborate on interdisciplinary...... real-life projects. This course strengthens not only innovation skills but personal and interpersonal skills as well. In this paper we will discuss the organization of the Innovation Pilot course. In particular we focus on: - Structure of programmes - Organization of the Innovation Pilot course...

  7. Contributing to Sustainability Education of East Asian University Students through a Field Trip Experience: A Social-Ecological Perspective

    Directory of Open Access Journals (Sweden)

    Tae Kyung Yoon

    2016-10-01

    Full Text Available This study reports the effects of a field trip environmental education program with a social-ecological perspective on the experience and learning of university students from China, Japan, South Korea and Vietnam. The students visited Jeju Island, the Saemangeum Sea Dike, the Demilitarized Zone and Seoul, South Korea. Their experiences and learning about social-ecological interactions were analyzed using the new environmental paradigm test, an evaluation questionnaire, group presentations and individual reports. Across demographic characteristics, the participants believed the program fairly presented the concept of social-ecological systems. Some developed new ideas of social-ecological systems through interpreting, transforming and contextualizing their field trip experience based on prior knowledge bases; others compared the sites to case studies. They preferred the sites where social-ecological issues were clearly presented by well-preserved landscapes, successful environmental management or environmental conflict. The results show the need for an advanced multi-dimensional methodology to evaluate students’ learning through constructive processes. The program design of this study from planning to field trip and evaluation, the field site design in which regional site resources were organized in a social-ecological context and the analysis of participants’ learning and experiences could contribute to attempts to couple the social-ecological perspective with the practice of sustainability and environmental education in field trip design.

  8. An Evaluation of Telecommuting As a Trip Reduction Measure

    OpenAIRE

    Kitamura, Ryuichi; Mokhtarian, Patricia L.; Pendyala, Ram M.

    1991-01-01

    Telecommuting, which is the performance of work at home or at a center close to home using telecommunications, has attracted growing interest among planners and researchers as a strategy for reducing traveldemand. This paper investigates the potential of telecommuting as a trip reduction measure, using data obtained from a telecommuting pilot project involving State of California government employees. In this pilot project, a three-day trip diary was administered, before and after te...

  9. Accommodation of the spinal cat to a tripping perturbation

    Directory of Open Access Journals (Sweden)

    Hui eZhong

    2012-05-01

    Full Text Available Adult cats with a complete spinal cord transection at T12-T13 can relearn over a period of days-to-weeks how to generate full weight-bearing stepping on a treadmill or standing ability if trained specifically for that task. In the present study, we assessed short-term (msec-min adaptations by repetitively imposing a mechanical perturbation on the hindlimb of chronic spinal cats by placing a rod in the path of the leg during the swing phase to trigger a tripping response. The kinematics and EMG were recorded during control (10 steps, trip (1 to 60 steps with various patterns and then release (without any tripping stimulus, 10 to 20 steps sequences. Our data show that the activation patterns and kinematics of the hindlimb in the step cycle immediately following the initial trip (mechanosensory stimulation of the dorsal surface of the paw was modified in a way that increased the probability of avoiding the obstacle in the subsequent step. This indicates that the spinal sensorimotor circuitry reprogrammed the trajectory of the swing following a perturbation prior to the initiation of the swing phase of the subsequent step, in effect attempting to avoid the re-occurrence of the perturbation. The average height of the release steps was elevated compared to control regardless of the pattern and the length of the trip sequences. In addition, the average impact force on the tripping rod tended to be lower with repeated exposure to the tripping stimulus. EMG recordings suggest that the semitendinosus, a primary knee flexor, was a major contributor to the adaptive tripping response. These results demonstrate that the lumbosacral locomotor circuitry can modulate the activation patterns of the hindlimb motor pools within the time frame of single step in a manner that tends to minimize repeated perturbations. Furthermore, these adaptations remained evident for a number of steps after removal of the mechanosensory stimulation.

  10. User Oriented Trajectory Search for Trip Recommendation

    KAUST Repository

    Ding, Ruogu

    2012-07-08

    Trajectory sharing and searching have received significant attention in recent years. In this thesis, we propose and investigate the methods to find and recommend the best trajectory to the traveler, and mainly focus on a novel technique named User Oriented Trajectory Search (UOTS) query processing. In contrast to conventional trajectory search by locations (spatial domain only), we consider both spatial and textual domains in the new UOTS query. Given a trajectory data set, the query input contains a set of intended places given by the traveler and a set of textual attributes describing the traveler’s preference. If a trajectory is connecting/close to the specified query locations, and the textual attributes of the trajectory are similar to the traveler’s preference, it will be recommended to the traveler. This type of queries can enable many popular applications such as trip planning and recommendation. There are two challenges in UOTS query processing, (i) how to constrain the searching range in two domains and (ii) how to schedule multiple query sources effectively. To overcome the challenges and answer the UOTS query efficiently, a novel collaborative searching approach is developed. Conceptually, the UOTS query processing is conducted in the spatial and textual domains alternately. A pair of upper and lower bounds are devised to constrain the searching range in two domains. In the meantime, a heuristic searching strategy based on priority ranking is adopted for scheduling the multiple query sources, which can further reduce the searching range and enhance the query efficiency notably. Furthermore, the devised collaborative searching approach can be extended to situations where the query locations are ordered. Extensive experiments are conducted on both real and synthetic trajectory data in road networks. Our approach is verified to be effective in reducing both CPU time and disk I/O time.

  11. WIPP site and vicinity geological field trip

    International Nuclear Information System (INIS)

    Chaturvedi, L.

    1980-10-01

    The Environmental Evaluation Group is conducting an assessment of the radiological health risks to people from the Waste Isolation Pilot Plant. As a part of this work, EEG is making an effort to improve the understanding of those geological issues concerning the WIPP site which may affect the radiological consequences of the proposed repository. One of the important geological issues to be resolved is the timing and the nature of the dissolution processes which may have affected the WIPP site. EEG organized a two-day conference of geological scientists, on January 17-18, 1980. On the basis of the January conference and the June field trip, EEG has formed the following conclusions: (1) it has not been clearly established that the site or the surrounding area has been attacked by deep dissolution to render it unsuitable for the nuclear waste pilot repository; (2) the existence of an isolated breccia pipe at the site unaccompanied by a deep dissolution wedge, is a very remote possibility; (3) more specific information about the origin and the nature of the brine reservoirs is needed. An important question that should be resolved is whether each encounter with artesian brine represents a separate pocket or whether these occurrences are interconnected; (4) Anderson has postulated a major tectonic fault or a fracture system at the Basin margin along the San Simon Swale; (5) the area in the northern part of the WIPP site, identified from geophysical and bore hole data as the disturbed zone, should be further investigated to cleary understand the nature and significance of this structural anomaly; and (6) a major drawback encountered during the discussions of geological issues related to the WIPP site is the absence of published material that brings together all the known information related to a particular issue

  12. The Elements of Language Curriculum: A Systematic Approach to Program Development.

    Science.gov (United States)

    Brown, James Dean

    A systematic approach to second language curriculum development is outlined, enumerating the phases and activities involved in developing and implementing a sound and effective language program. The first chapter describes a system whereby all language teaching activities can be classified into approaches, syllabuses, techniques, exercises, or…

  13. 10 CFR 420.17 - Optional elements of State Energy Program plans.

    Science.gov (United States)

    2010-01-01

    ... businesses, in order to improve energy technology product development and independent quality control testing... following: (1) Program activities of public education to promote energy efficiency, renewable energy, and... peak demands for energy and improve the efficiency of energy supply systems, including electricity...

  14. National Waste Terminal Storage Program: critical element management concept. Volume II. Concept description

    International Nuclear Information System (INIS)

    1977-05-01

    The objective of the CEM Concept is to describe techniques for systematically identifying, evaluating, and influencing those technical, social, economic, political and institutional factors (i.e., events, trends and conditions) that are perceived as being probable uncertainties to the attainment of planned program objectives

  15. Thunderstorm Research International Program (TRIP 77) report to management

    Science.gov (United States)

    Taiani, A. J.

    1977-01-01

    A post analysis of the previous day's weather, followed by the day's forecast and an outlook on weather conditions for the following day is given. The normal NOAA weather charts were used, complemented by the latest GOES satellite pictures, the latest rawinsonde sounding, and the computer-derived thunderstorm probability forecasts associated with the sounding.

  16. Single Point Vulnerability Analysis of Automatic Seismic Trip System

    Energy Technology Data Exchange (ETDEWEB)

    Oh, Seo Bin; Chung, Soon Il; Lee, Yong Suk [FNC Technology Co., Yongin (Korea, Republic of); Choi, Byung Pil [KHNP CRI, Daejeon (Korea, Republic of)

    2016-10-15

    Single Point Vulnerability (SPV) analysis is a process used to identify individual equipment whose failure alone will result in a reactor trip, turbine generator failure, or power reduction of more than 50%. Automatic Seismic Trip System (ASTS) is a newly installed system to ensure the safety of plant when earthquake occurs. Since this system directly shuts down the reactor, the failure or malfunction of its system component can cause a reactor trip more frequently than other systems. Therefore, an SPV analysis of ASTS is necessary to maintain its essential performance. To analyze SPV for ASTS, failure mode and effect analysis (FMEA) and fault tree analysis (FTA) was performed. In this study, FMEA and FTA methods were performed to select SPV equipment of ASTS. D/O, D/I, A/I card, seismic sensor, and trip relay had an effect on the reactor trip but their single failure will not cause reactor trip. In conclusion, ASTS is excluded as SPV. These results can be utilized as the basis data for ways to enhance facility reliability such as design modification and improvement of preventive maintenance procedure.

  17. Single Point Vulnerability Analysis of Automatic Seismic Trip System

    International Nuclear Information System (INIS)

    Oh, Seo Bin; Chung, Soon Il; Lee, Yong Suk; Choi, Byung Pil

    2016-01-01

    Single Point Vulnerability (SPV) analysis is a process used to identify individual equipment whose failure alone will result in a reactor trip, turbine generator failure, or power reduction of more than 50%. Automatic Seismic Trip System (ASTS) is a newly installed system to ensure the safety of plant when earthquake occurs. Since this system directly shuts down the reactor, the failure or malfunction of its system component can cause a reactor trip more frequently than other systems. Therefore, an SPV analysis of ASTS is necessary to maintain its essential performance. To analyze SPV for ASTS, failure mode and effect analysis (FMEA) and fault tree analysis (FTA) was performed. In this study, FMEA and FTA methods were performed to select SPV equipment of ASTS. D/O, D/I, A/I card, seismic sensor, and trip relay had an effect on the reactor trip but their single failure will not cause reactor trip. In conclusion, ASTS is excluded as SPV. These results can be utilized as the basis data for ways to enhance facility reliability such as design modification and improvement of preventive maintenance procedure

  18. Hybrid intelligent monironing systems for thermal power plant trips

    Science.gov (United States)

    Barsoum, Nader; Ismail, Firas Basim

    2012-11-01

    Steam boiler is one of the main equipment in thermal power plants. If the steam boiler trips it may lead to entire shutdown of the plant, which is economically burdensome. Early boiler trips monitoring is crucial to maintain normal and safe operational conditions. In the present work two artificial intelligent monitoring systems specialized in boiler trips have been proposed and coded within the MATLAB environment. The training and validation of the two systems has been performed using real operational data captured from the plant control system of selected power plant. An integrated plant data preparation framework for seven boiler trips with related operational variables has been proposed for IMSs data analysis. The first IMS represents the use of pure Artificial Neural Network system for boiler trip detection. All seven boiler trips under consideration have been detected by IMSs before or at the same time of the plant control system. The second IMS represents the use of Genetic Algorithms and Artificial Neural Networks as a hybrid intelligent system. A slightly lower root mean square error was observed in the second system which reveals that the hybrid intelligent system performed better than the pure neural network system. Also, the optimal selection of the most influencing variables performed successfully by the hybrid intelligent system.

  19. The elements of a consumer-based initiative in contributing to positive environmental change: Monterey Bay Aquarium's Seafood Watch program.

    Science.gov (United States)

    Kemmerly, Jennifer Dianto; Macfarlane, Victoria

    2009-09-01

    Monterey Bay Aquarium launched the Seafood Watch program in 2000. The program's Seafood Watch pocket guide is a simple tool that visitors can use to identify seafood from environmentally responsible sources. Since its inception, more than 2 million pocket guides have been distributed to Monterey Bay Aquarium visitors and 20 million have been distributed through partnerships across the United States. Partner institutions such as aquariums, conservation organizations, and businesses also conduct outreach and are working to influence their local seafood purveyors. An evaluation conducted in 2003 and 2004 assessed the program's strategies for increasing awareness and shifting consumer buying habits as they relate to sustainable seafood, including use of the pocket guide. Visitors who picked up pocket guides were surveyed immediately after their aquarium visit, and again four months later. The evaluation found that most visitors continued to use the guides and had changed their seafood buying habits in several respects. Those interviewed also reported some barriers to using the guides. The elements that appear to be critical to the success of the strategy with respect to changing consumer purchasing habits include: a focused distribution approach; providing credible and specific information on problems and solutions to increase action-related knowledge; providing a trigger or prompt that is available at the time of purchase; and reducing barriers to action, at the point of action, by working with seafood purveyors and the broader sustainable seafood movement to increase knowledge and available options. In response to the evaluation, Seafood Watch has strengthened these elements and expanded to help meet the needs of the broader sustainable seafood movement. A process of strategic planning, evaluation, cooperation among partners, and adaptability to the movement's natural evolution has proven to be critical to the program's success in contributing to the development of a

  20. Language Travel or Language Tourism: Have Educational Trips Changed So Much?

    Science.gov (United States)

    Laborda, Jesus Garcia

    2007-01-01

    This article points out the changes in organization, students and language learning that language trips, as contrasted with educational trips (of which language trips are a subgroup) have gone through in the last years. The article emphasizes the need to differentiate between language trips and language tourism based on issues of additional…

  1. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2002 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Hebdon, J. Lance; Castillo, Jason (Idaho Department of Fish and Game, Boise, ID)

    2004-06-01

    On November 20, 1991, the National Oceanic Atmospheric Administration listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes and Idaho Department of Fish and Game initiated the Snake River Sockeye Salmon Sawtooth Valley Project to conserve and rebuild populations in Idaho. Restoration efforts are focusing on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced juvenile sockeye salmon from the captive broodstock program occurred in 1994. The first anadromous adult returns from the captive broodstock program were recorded in 1999 when six jacks and one jill were captured at IDFG's Sawtooth Fish Hatchery. In 2002, progeny from the captive broodstock program were released using four strategies: age-0 presmolts were released to Alturas, Pettit, and Redfish lakes in August and to Pettit and Redfish lakes in October, age-1 smolts were released to Redfish Lake Creek in May, eyed-eggs were planted in Pettit Lake in December, and hatchery-produced and anadromous adult sockeye salmon were released to Redfish Lake for volitional spawning in September. Oncorhynchus nerka population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September 2002. Age-0, age-1, and age-2 O. nerka were captured in Redfish Lake, and population abundance was estimated at 50,204 fish. Age-0, age-1, age-2, and age-3 kokanee were captured in Alturas Lake, and population abundance was estimated at 24,374 fish. Age-2 and age-3 O. nerka were captured in Pettit Lake, and population abundance was estimated at 18,328 fish. The ultimate goal of the Idaho Department of Fish and Game (IDFG) captive broodstock development and evaluation efforts is to recover sockeye salmon runs in Idaho waters. Recovery is defined as reestablishing sockeye salmon runs and providing for utilization of sockeye salmon and kokanee resources by anglers

  2. IE Information Notice No. 85-64: BBC Brown Boveri low-voltage K-line circuit breakers, with deficient overcurrent trip devices models OD-4 and 5

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    On May 13, 1985, BBC Brown Boveri Inc. (BBC) made a 10 CFR Part 21 report to the NRC concerning a deficiency in the Models OD-4 and OD-5 overcurrent trip devices installed on K-line circuit breakers. The affected breakers were manufactured by BBC from October 1983 to March 1985 and may have incorrect short time delay band levers (links) installed in electromechanical overcurrent trip device models OD-4 and OD-5. The incorrect link could limit the travel of the short time armature and cause the short time element to be inoperative in the maximum (MAX) band. The May 13, 1985, report recommended that all K-line circuit breakers with the OD-4 and OD-5 overcurrent trip devices and any spare OD-4 and OD-5 overcurrent trip devices that were manufactured between October 1983 and March 1985, be inspected for an incorrect short time delay band link. Licensees known by BBC to have purchased K-line breakers or spare OD-4 or OD-5 overcurrent trip devices were notified of the possible defect and instructions provided for their inspection. Enclosed is a list of utilities and related facilities that were notified by BBC. However, BBC advised the NRC that there is a possibility that other utilities could be using K-line circuit breakers with the suspect OD-4 and OD-5 overcurrent trip devices. Therefore, all licensees are being notified of this possible defect

  3. High-uranium-loaded U3O8--Al fuel element development program

    International Nuclear Information System (INIS)

    Martin, M.M.

    1978-01-01

    The High-Uranium-Loaded U 3 O 8 --Al Fuel Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages

  4. Test program element II blanket and shield thermal-hydraulic and thermomechanical testing, experimental facility survey

    International Nuclear Information System (INIS)

    Ware, A.G.; Longhurst, G.R.

    1981-12-01

    This report presents results of a survey conducted by EG and G Idaho to determine facilities available to conduct thermal-hydraulic and thermomechanical testing for the Department of Energy Office of Fusion Energy First Wall/Blanket/Shield Engineering Test Program. In response to EG and G queries, twelve organizations (in addition to EG and G and General Atomic) expressed interest in providing experimental facilities. A variety of methods of supplying heat is available

  5. Test program element II blanket and shield thermal-hydraulic and thermomechanical testing, experimental facility survey

    Energy Technology Data Exchange (ETDEWEB)

    Ware, A.G.; Longhurst, G.R.

    1981-12-01

    This report presents results of a survey conducted by EG and G Idaho to determine facilities available to conduct thermal-hydraulic and thermomechanical testing for the Department of Energy Office of Fusion Energy First Wall/Blanket/Shield Engineering Test Program. In response to EG and G queries, twelve organizations (in addition to EG and G and General Atomic) expressed interest in providing experimental facilities. A variety of methods of supplying heat is available.

  6. Finite-element three-dimensional ground-water (FE3DGW) flow model - formulation, program listings and users' manual

    International Nuclear Information System (INIS)

    Gupta, S.K.; Cole, C.R.; Bond, F.W.

    1979-12-01

    The Assessment of Effectiveness of Geologic Isolation Systems (AEGIS) Program is developing and applying the methodology for assessing the far-field, long-term post-closure safety of deep geologic nuclear waste repositories. AEGIS is being performed by Pacific Northwest Laboratory (PNL) under contract with the Office of Nuclear Waste Isolation (OWNI) for the Department of Energy (DOE). One task within AEGIS is the development of methodology for analysis of the consequences (water pathway) from loss of repository containment as defined by various release scenarios. Analysis of the long-term, far-field consequences of release scenarios requires the application of numerical codes which simulate the hydrologic systems, model the transport of released radionuclides through the hydrologic systems to the biosphere, and, where applicable, assess the radiological dose to humans. Hydrologic and transport models are available at several levels of complexity or sophistication. Model selection and use are determined by the quantity and quality of input data. Model development under AEGIS and related programs provides three levels of hydrologic models, two levels of transport models, and one level of dose models (with several separate models). This document consists of the description of the FE3DGW (Finite Element, Three-Dimensional Groundwater) Hydrologic model third level (high complexity) three-dimensional, finite element approach (Galerkin formulation) for saturated groundwater flow

  7. JAC, 2-D Finite Element Method Program for Quasi Static Mechanics Problems by Nonlinear Conjugate Gradient (CG) Method

    International Nuclear Information System (INIS)

    Biffle, J.H.

    1991-01-01

    1 - Description of program or function: JAC is a two-dimensional finite element program for solving large deformation, temperature dependent, quasi-static mechanics problems with the nonlinear conjugate gradient (CG) technique. Either plane strain or axisymmetric geometry may be used with material descriptions which include temperature dependent elastic-plastic, temperature dependent secondary creep, and isothermal soil models. The nonlinear effects examined include material and geometric nonlinearities due to large rotations, large strains, and surface which slide relative to one another. JAC is vectorized to perform efficiently on the Cray1 computer. A restart capability is included. 2 - Method of solution: The nonlinear conjugate gradient method is employed in a two-dimensional plane strain or axisymmetric setting with various techniques for accelerating convergence. Sliding interface conditions are also implemented. A four-node Lagrangian uniform strain element is used with orthogonal hourglass viscosity to control the zero energy modes. Three sets of continuum equations are needed - kinematic statements, constitutive equations, and equations of equilibrium - to describe the deformed configuration of the body. 3 - Restrictions on the complexity of the problem - Maxima of: 10 load and solution control functions, 4 materials. The strain rate is assumed constant over a time interval. Current large rotation theory is applicable to a maximum shear strain of 1.0. JAC should be used with caution for large shear strains. Problem size is limited only by available memory

  8. Cycle for fuel elements. Uranium production, programs for nuclear power stations and capital expenditure involved

    International Nuclear Information System (INIS)

    Andriot, J.; Gaussens, J.

    1958-01-01

    A number of different possible programs for nuclear power stations of various types are presented in this survey. These programs are established in relation to the use of uranium and thorium in amounts similar to those that shall probably be produced in France during the next fifteen years. As it is possible to draw plans for nuclear power stations in which several processes exist simultaneously, an unlimited number of variations being thinkable, this survey is limited to successive analysis of the results obtained by use of only one of each of the following three systems: - system natural uranium-graphite, - system natural uranium-heavy water, -system enriched uranium-pressurised light water. All schemes are considered as assemblages of these three simple systems. The effects of plutonium recycling are also considered for each system. The electric power installed and the capacity of stations situated up-stream and down-stream have been calculated by this method and an attempt has been made to establish the sum to be invested during the fifteen years necessary for the launching of the programs scheduled. A table of timing for the investments groups the results obtained. Considering the fact that French availabilities in capital shall not be unlimited during the coming years, this way of presenting the results seems to be interesting. (author) [fr

  9. Systematic evaluation program review of NRC Safety Topic VI-10.A associated with the electrical, instrumentation and control portions of the testing of reactor trip system and engineered safety features, including response time for the Dresden station, Unit II nuclear power plant

    International Nuclear Information System (INIS)

    St Leger-Barter, G.

    1980-11-01

    This report documents the technical evaluation and review of NRC Safety Topic VI-10.A, associated with the electrical, instrumentation, and control portions of the testing of reactor trip systems and engineered safety features including response time for the Dresden II nuclear power plant, using current licensing criteria

  10. An approach of raising the low power reactor trip block (P-7) in Maanshan Power Plant

    International Nuclear Information System (INIS)

    Wang, L.C.

    1984-01-01

    The technical specification for the Maanshan Nuclear Power Station (FSAR Table 16.2.2-3) requires that with an increasing reactor power level above the setpoint of low power reactor trip block (P-7), a turbine trip shall initiate a reactor trip. This anticipatory reactor trip on turbine trip prevents the pressurizer PORV from openning during turbine trip event. In order to reduce unnecessary reactor trip due to turbine trip on low reactor power level during Maanshan start-up stage, Taiwan Power Company performed a transient analysis for turbine trip event by using RETRAN code. The highest reactor power level at which a turbine trip will not open the pressurizer PORV is searched. The results demonstrated that this power level can be increased from the original value-10% of the rated thermal power-to about 48% of the rated thermal power

  11. United States: Ukraine Technical Exchange II trip report

    International Nuclear Information System (INIS)

    Moak, D.J.; Wendling, M.A.

    1995-02-01

    May 15--21, 1994, the first technical conference was held at Hanford between Ukraine-Chornobyl, Westinghouse Hanford, and SAIC, to exchange technical information and experience gained in cleanup and stabilization of radioactive contamination at Hanford and Chornobyl. Protocol was signed for a second exchange and technology demonstration program in Kiev and near Chornobyl power plants. Technical Exchange No. 2 was held from August 28--September 9, 1994, with 3 focus areas: field demonstration of DOE-Hanford technologies and application to cleanup of contaminated lands resulting from 1986 Chornobyl accident; application of other US DOE-technologies; and observation/evaluation of Ukraine-developed technologies for potential application in USA. Three radiological mapping systems were demonstrated near Chornobyl: man-carried Ultrasonic Ranging and Data System, a mobile radiological data system, and NOMAD field gamma spectroscopy system. The Ukraine-Chornobyl team hosted technical presentations, discussions and field trips for 4.5 days, providing insight on the Chornobyl problem and allowing the US team to present overviews on DOE technologies that may be applicable to the Chornobyl situation. It is concluded that Ukrainian scientists have tremendous talent and expended considerable energy in attempting to tackle such a problem, but economic and cultural conditions with Ukraine have prevented them from acquiring the resources to implement basic aspects of characterization and remediation activities. Most of their publications are in Russian only. Their translation, plus resources to carry out proposals for bench scale and field demonstration projects, could benefit the DOE complex and other nuclear programs. The considerable cultural and economic change occurring in Ukraine, is providing opportunities for private industries to assist in the changes and for DOE, others to apply cleanup technologies, and it is essential that close institutional relations be established

  12. Logic elements for reactor period meter

    Science.gov (United States)

    McDowell, William P.; Bobis, James P.

    1976-01-01

    Logic elements are provided for a reactor period meter trip circuit. For one element, first and second inputs are applied to first and second chopper comparators, respectively. The output of each comparator is O if the input applied to it is greater than or equal to a trip level associated with each input and each output is a square wave of frequency f if the input applied to it is less than the associated trip level. The outputs of the comparators are algebraically summed and applied to a bandpass filter tuned to f. For another element, the output of each comparator is applied to a bandpass filter which is tuned to f to give a sine wave of frequency f. The outputs of the filters are multiplied by an analog multiplier whose output is 0 if either input is 0 and a sine wave of frequency 2f if both inputs are a frequency f.

  13. Field load and displacement boundary condition computer program used for the finite element analysis and design of toroidal field coils in a tokamak

    International Nuclear Information System (INIS)

    Smith, R.A.

    1975-06-01

    The design evaluation of toroidal field coils on the Princeton Large Torus (PLT), the Poloidal Diverter Experiment (PDX) and the Tokamak Fusion Test Reactor (TFTR) has been performed by structural analysis with the finite element method. The technique employed has been simplified with supplementary computer programs that are used to generate the input data for the finite element computer program. Significant automation has been provided by computer codes in three areas of data input. These are the definition of coil geometry by a mesh of node points, the definition of finite elements via the node points and the definition of the node point force/displacement boundary conditions. The computer programs by name that have been used to perform the above functions are PDXNODE, ELEMENT and PDXFORC. The geometric finite element modeling options for toroidal field coils provided by PDXNODE include one-fourth or one-half symmetric sections of circular coils, oval shaped coils or dee-shaped coils with or without a beveled wedging surface. The program ELEMENT which defines the finite elements for input to the finite element computer code can provide considerable time and labor savings when defining the model of coils of non-uniform cross-section or when defining the model of coils whose material properties are different in the R and THETA directions due to the laminations of alternate epoxy and copper windings. The modeling features provided by the program ELEMENT have been used to analyze the PLT and the TFTR toroidal field coils with integral support structures. The computer program named PDXFORC is described. It computes the node point forces in a model of a toroidal field coil from the vector crossproduct of the coil current and the magnetic field. The model can be of one-half or one-fourth symmetry to be consistent with the node model defined by PDXNODE, and the magnetic field is computed from toroidal or poloidal coils

  14. Snake River Sockeye Salmon Captive Broodstock Program Hatchery Element : Project Progress Report 2007 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J.; Heindel, Jeff A.; Green, Daniel G.; Kline, Paul A.

    2008-12-17

    Numbers of Snake River sockeye salmon Oncorhynchus nerka have declined dramatically in recent years. In Idaho, only the lakes of the upper Salmon River (Sawtooth Valley) remain as potential sources of production (Figure 1). Historically, five Sawtooth Valley lakes (Redfish, Alturas, Pettit, Stanley, and Yellowbelly) supported sockeye salmon (Bjornn et al. 1968; Chapman et al. 1990). Currently, only Redfish Lake receives a remnant anadromous run. On April 2, 1990, the National Oceanic and Atmospheric Administration Fisheries Service (NOAA - formerly National Marine Fisheries Service) received a petition from the Shoshone-Bannock Tribes (SBT) to list Snake River sockeye salmon as endangered under the United States Endangered Species Act (ESA) of 1973. On November 20, 1991, NOAA declared Snake River sockeye salmon endangered. In 1991, the SBT, along with the Idaho Department of Fish & Game (IDFG), initiated the Snake River Sockeye Salmon Sawtooth Valley Project (Sawtooth Valley Project) with funding from the Bonneville Power Administration (BPA). The goal of this program is to conserve genetic resources and to rebuild Snake River sockeye salmon populations in Idaho. Coordination of this effort is carried out under the guidance of the Stanley Basin Sockeye Technical Oversight Committee (SBSTOC), a team of biologists representing the agencies involved in the recovery and management of Snake River sockeye salmon. National Oceanic and Atmospheric Administration Fisheries Service ESA Permit Nos. 1120, 1124, and 1481 authorize IDFG to conduct scientific research on listed Snake River sockeye salmon. Initial steps to recover the species involved the establishment of captive broodstocks at the Eagle Fish Hatchery in Idaho and at NOAA facilities in Washington State (for a review, see Flagg 1993; Johnson 1993; Flagg and McAuley 1994; Kline 1994; Johnson and Pravecek 1995; Kline and Younk 1995; Flagg et al. 1996; Johnson and Pravecek 1996; Kline and Lamansky 1997; Pravecek and

  15. Viral Hepatitis Strategic Information to Achieve Elimination by 2030: Key Elements for HIV Program Managers.

    Science.gov (United States)

    Hutin, Yvan; Low-Beer, Daniel; Bergeri, Isabel; Hess, Sarah; Garcia-Calleja, Jesus Maria; Hayashi, Chika; Mozalevskis, Antons; Rinder Stengaard, Annemarie; Sabin, Keith; Harmanci, Hande; Bulterys, Marc

    2017-12-15

    Evidence documenting the global burden of disease from viral hepatitis was essential for the World Health Assembly to endorse the first Global Health Sector Strategy (GHSS) on viral hepatitis in May 2016. The GHSS on viral hepatitis proposes to eliminate viral hepatitis as a public health threat by 2030. The GHSS on viral hepatitis is in line with targets for HIV infection and tuberculosis as part of the Sustainable Development Goals. As coordination between hepatitis and HIV programs aims to optimize the use of resources, guidance is also needed to align the strategic information components of the 2 programs. The World Health Organization monitoring and evaluation framework for viral hepatitis B and C follows an approach similar to the one of HIV, including components on the following: (1) context (prevalence of infection), (2) input, (3) output and outcome, including the cascade of prevention and treatment, and (4) impact (incidence and mortality). Data systems that are needed to inform this framework include (1) surveillance for acute hepatitis, chronic infections, and sequelae and (2) program data documenting prevention and treatment, which for the latter includes a database of patients. Overall, the commonalities between HIV and hepatitis at the strategic, policy, technical, and implementation levels justify coordination, strategic linkage, or integration, depending on the type of HIV and viral hepatitis epidemics. Strategic information is a critical area of this alignment under the principle of what gets measured gets done. It is facilitated because the monitoring and evaluation frameworks for HIV and viral hepatitis were constructed using a similar approach. However, for areas where elimination of viral hepatitis requires data that cannot be collected through the HIV program, collaborations are needed with immunization, communicable disease control, tuberculosis, and hepatology centers to ensure collection of information for the remaining indicators.

  16. Corrosion resistant metallic canisters: an important element of a multibarrier disposal program

    International Nuclear Information System (INIS)

    Magnani, N.J.; Braithwaite, J.W.

    1979-01-01

    A program with the goal of qualifying a material for a 300 year lifetime as a nuclear waste canister is underway at Sandia Laboratories. The corrosion and stress corrosion cracking behavior of the leading candidate, TiCode-12 (Ti-0.8% Ni-0.3% Mo), is contrasted to that of a commonly used engineering alloy, 304 stainless steel. Experimental evidence is presented which shows the inadequacy of 304 stainless steel in simulated repository environments and shows that TiCode-12 may survive the desired 300 years. Further work required to qualify TiCode-12 is outlined

  17. Snake River Sockeye Salmon Captive Broodstock Program; Hatchery Element, 1999 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Dan J,; Heindel, Jeff A.; Kline, Paul A. (Idaho Department of Fish and Game, Boise, ID)

    2005-08-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and the National Marine Fisheries Service initiated efforts to conserve and rebuild populations in Idaho. Initial steps to recover sockeye salmon included the establishment of a captive broodstock program at the Idaho Department of Fish and Game Eagle Fish Hatchery. Sockeye salmon broodstock and culture responsibilities are shared with the National Marine Fisheries Service at two locations adjacent to Puget Sound in Washington State. Activities conducted by the Shoshone-Bannock Tribes and the National Marine Fisheries Service are reported under separate cover. Idaho Department of Fish and Game monitoring and evaluation activities of captive broodstock program fish releases are also reported under separate cover. Captive broodstock program activities conducted between January 1, 1999 and December 31, 1999 are presented in this report. In 1999, seven anadromous sockeye salmon returned to the Sawtooth Valley and were captured at the adult weir located on the upper Salmon River. Four anadromous adults were incorporated in the captive broodstock program spawning design for year 1999. The remaining three adults were released to Redfish Lake for natural spawning. All seven adults were adipose and left ventral fin-clipped, indicating hatchery origin. One sockeye salmon female from the anadromous group and 81 females from the captive broodstock group were spawned at the Eagle Fish Hatchery in 1999. Spawn pairings produced approximately 63,147 eyed-eggs with egg survival to eyed-stage of development averaging 38.97%. Eyed-eggs (20,311), presmolts (40,271), smolts (9,718), and adults (21) were planted or released into Sawtooth Valley waters in 1999. Supplementation strategies involved releases to Redfish Lake, Redfish Lake Creek

  18. A brave new world: considering the pedagogic potential of Virtual World Field Trips (VWFTs in initial teacher education

    Directory of Open Access Journals (Sweden)

    Fitzsimons Sabrina

    2016-07-01

    Full Text Available In its broadest and historical sense, place-based education refers to education that occurs outside of the physical boundaries of a school building (Dewey 1910; Sobel 1996; Theobald 1997; Woodhouse and Knapp 2000. Place-based education, colloquially referred to as the ‘field trip’, is predominantly considered a pedagogic tool of the sciences. It involves a physical movement from the school-based location to a place of interest, for example, a geography field trip to an ecological landscape or science visit to a local museum. This paper considers the use of virtual world field trips (VWFTs within the context of a pre-service Teacher Education programme. The paper presents data from one undergraduate module offered on a programme of initial teacher education. The paper identifies three significant elements of virtual world field trips: place, people and content. First, the virtual world can provide access to places not possible in the offline context as a result of geographic, economic or religious factors. Second, exposure to and dialogue with a variety of world views can challenge students’ assumptions, facilitate reflection and provide an opportunity for oneto-one teaching encounters. Third, from a teacher educator perspective, engagement in virtual world field trips can provide a space for teachers to model teaching methodologies and model creative learning techniques, thus providing student teachers with an insight into different approaches to teaching.

  19. MPSalsa a finite element computer program for reacting flow problems. Part 2 - user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Salinger, A.; Devine, K.; Hennigan, G.; Moffat, H. [and others

    1996-09-01

    This manual describes the use of MPSalsa, an unstructured finite element (FE) code for solving chemically reacting flow problems on massively parallel computers. MPSalsa has been written to enable the rigorous modeling of the complex geometry and physics found in engineering systems that exhibit coupled fluid flow, heat transfer, mass transfer, and detailed reactions. In addition, considerable effort has been made to ensure that the code makes efficient use of the computational resources of massively parallel (MP), distributed memory architectures in a way that is nearly transparent to the user. The result is the ability to simultaneously model both three-dimensional geometries and flow as well as detailed reaction chemistry in a timely manner on MT computers, an ability we believe to be unique. MPSalsa has been designed to allow the experienced researcher considerable flexibility in modeling a system. Any combination of the momentum equations, energy balance, and an arbitrary number of species mass balances can be solved. The physical and transport properties can be specified as constants, as functions, or taken from the Chemkin library and associated database. Any of the standard set of boundary conditions and source terms can be adapted by writing user functions, for which templates and examples exist.

  20. Simulation of fluid-structure interaction in micropumps by coupling of two commercial finite element programs

    Science.gov (United States)

    Klein, Andreas; Gerlach, Gerald

    1998-09-01

    This paper deals with the simulation of the fluid-structure interaction phenomena in micropumps. The proposed solution approach is based on external coupling of two different solvers, which are considered here as `black boxes'. Therefore, no specific intervention is necessary into the program code, and solvers can be exchanged arbitrarily. For the realization of the external iteration loop, two algorithms are considered: the relaxation-based Gauss-Seidel method and the computationally more extensive Newton method. It is demonstrated in terms of a simplified test case, that for rather weak coupling, the Gauss-Seidel method is sufficient. However, by simply changing the considered fluid from air to water, the two physical domains become strongly coupled, and the Gauss-Seidel method fails to converge in this case. The Newton iteration scheme must be used instead.

  1. Language delays, reading delays, and learning difficulties: interactive elements requiring multidimensional programming.

    Science.gov (United States)

    Hay, Ian; Elias, Gordon; Fielding-Barnsley, Ruth; Homel, Ross; Freiberg, Kate

    2007-01-01

    Researchers have hypothesized four levels of instructional dialogue and claimed that teachers can improve children's language development by incorporating these dialogue levels in their classrooms. It has also been hypothesized that enhancing children's early language development enhances children's later reading development. This quasi-experimental research study investigated both of these hypotheses using a collaborative service delivery model for Grade 1 children with language difficulties from a socially and economically disadvantaged urban community in Australia. Comparing the end-of-year reading achievement scores for the 57 children who received the language intervention with those of the 59 children in the comparison group, the findings from this research are supportive of both hypotheses. The interrelationships between learning difficulties, reading difficulties, and language difficulties are discussed along with children's development in vocabulary, use of memory strategies and verbal reasoning, and the need for multidimensional programming.

  2. X-ray fluorescence spectroscopy for the elemental analysis of plutonium-bearing materials for the materials disposition program

    International Nuclear Information System (INIS)

    Voit, S.L.; Boerigter, S.T.; Rising, T.L.

    1997-01-01

    The US Fissile Materials Disposition (MD) program will disposition about 50 MT of plutonium in the next century. Both of the alternative technologies for disposition, MOX Fuel and Immobilization require knowledge of the incoming composition to 1--5 wt%. Wavelength Dispersive X-Ray Fluorescence (WDXRF) systems, a common elemental analysis technology with a variety of industrial applications and commercial vendors, can readily achieve this level of characterization. Since much of the excess plutonium will be packaged in a long-term storage container as part of the DOE Environmental Management (DOE-EM) program to stabilize plutonium-bearing materials, the characterization system must be implemented during the packaging process. The authors describe a preliminary design for the integration of the WDXRF system into the packaging system to be used at the Rocky Flats site. The Plutonium Stabilization and Packaging System (PuSPS), coupled with the WDXRF characterization system will provide MD with stabilized plutonium-bearing excess material that can be more readily fed to an immobilization facility. The overall added expense to the MD program of obtaining analytical information after materials have been packaged in long-term storage containers could far exceed the expense of implementing XRF analysis during the packaging process

  3. SAP3PR: a FORTRAN program for calculating equivalent nodal loads resulting from pressure on the faces of 8- to 20-node isoparametric elements

    International Nuclear Information System (INIS)

    Fanning, D.N.

    1978-04-01

    A computer program is described for calculating the equivalent nodal loads resulting from distributed loads on a three-dimensional finite-element model. Included is a listing of the computer program, a description of the input data, and an example of the output

  4. Vanpool trip planning based on evolutionary multiple objective optimization

    Science.gov (United States)

    Zhao, Ming; Yang, Disheng; Feng, Shibing; Liu, Hengchang

    2017-08-01

    Carpool and vanpool draw a lot of researchers’ attention, which is the emphasis of this paper. A concrete vanpool operation definition is given, based on the given definition, this paper tackles vanpool operation optimization using user experience decline index(UEDI). This paper is focused on making each user having identical UEDI and the system having minimum sum of all users’ UEDI. Three contributions are made, the first contribution is a vanpool operation scheme diagram, each component of the scheme is explained in detail. The second contribution is getting all customer’s UEDI as a set, standard deviation and sum of all users’ UEDI set are used as objectives in multiple objective optimization to decide trip start address, trip start time and trip destination address. The third contribution is a trip planning algorithm, which tries to minimize the sum of all users’ UEDI. Geographical distribution of the charging stations and utilization rate of the charging stations are considered in the trip planning process.

  5. Hybrid Intelligent Warning System for Boiler tube Leak Trips

    Directory of Open Access Journals (Sweden)

    Singh Deshvin

    2017-01-01

    Full Text Available Repeated boiler tube leak trips in coal fired power plants can increase operating cost significantly. An early detection and diagnosis of boiler trips is essential for continuous safe operations in the plant. In this study two artificial intelligent monitoring systems specialized in boiler tube leak trips have been proposed. The first intelligent warning system (IWS-1 represents the use of pure artificial neural network system whereas the second intelligent warning system (IWS-2 represents merging of genetic algorithms and artificial neural networks as a hybrid intelligent system. The Extreme Learning Machine (ELM methodology was also adopted in IWS-1 and compared with traditional training algorithms. Genetic algorithm (GA was adopted in IWS-2 to optimize the ANN topology and the boiler parameters. An integrated data preparation framework was established for 3 real cases of boiler tube leak trip based on a thermal power plant in Malaysia. Both the IWSs were developed using MATLAB coding for training and validation. The hybrid IWS-2 performed better than IWS-1.The developed system was validated to be able to predict trips before the plant monitoring system. The proposed artificial intelligent system could be adopted as a reliable monitoring system of the thermal power plant boilers.

  6. SAME-DAY TRIPS: A CHANCE OF URBAN DESTINATION DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Dario Simicevic

    2011-12-01

    Full Text Available The global economic crisis, the decline of standard and climatic factors influence the allocation of tourism trends at the global level. Certain types of tourist movements start up and develop; they have been present, but not sufficiently studied by authors. They also include a short trip or visit to a particular destination. Considering their characteristics, they do not require a lot of money and they make an increasingly important segment of the tourism market. Therefore, the importance of same-day trips should not be neglected on today's tourism market. Although in practice this part of the tourist offers and demand has not often been attached enough importance, same day trip can achieve a very significant inflow of funds and encourage the development of many potential tourist destinations. For all the reasons mentioned above, and because of its importance, the organization of same day-trips should be the fundamental basis and essential focus for tourism development. Taking into consideration that inbound tourist agencies show special interest for same-day trips, we have tried to give a starting point for further research in this part of the tourism market.

  7. Appraisal of boundary layer trips for landing gear testing

    Science.gov (United States)

    McCarthy, Philip; Feltham, Graham; Ekmekci, Alis

    2013-11-01

    Dynamic similarity during scaled model testing is difficult to maintain. Forced boundary layer transition via a surface protuberance is a common method used to address this issue, however few guidelines exist for the effective tripping of complex geometries, such as aircraft landing gears. To address this shortcoming, preliminary wind tunnel tests were performed at Re = 500,000. Surface transition visualisation and pressure measurements show that zigzag type trips of a given size and location are effective at promoting transition, thus preventing the formation of laminar separation bubbles and increasing the effective Reynolds number from the critical regime to the supercritical regime. Extension of these experiments to include three additional tripping methods (wires, roughness strips, CADCUT dots) in a range of sizes, at Reynolds number of 200,000 and below, have been performed in a recirculating water channel. Analysis of surface pressure measurements and time resolved PIV for each trip device, size and location has established a set of recommendations for successful use of tripping for future, low Reynolds number landing gear testing.

  8. Snake River Sockeye Salmon Captive Broodstock Program Research Elements : 2007 Annual Project Progess Report.

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Mike; Plaster, Kurtis; Redfield, Laura; Heindel, Jeff; Kline, Paul

    2008-12-17

    On November 20, 1991, the National Oceanic Atmospheric Administration listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes (SBT) and Idaho Department of Fish and Game (IDFG) initiated the Snake River Sockeye Salmon Captive Broodstock Program to conserve and rebuild populations in Idaho. Restoration efforts are focused on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced adults occurred in 1993. The first release of juvenile sockeye salmon from the captive broodstock program occurred in 1994. In 1999, the first anadromous adult returns from the captive broodstock program were recorded when six jacks and one jill were captured at the IDFG Sawtooth Fish Hatchery. In 2007, progeny from the captive broodstock program were released using four strategies: (1) eyed-eggs were planted in Pettit Lake in November; (2) age-0 presmolts were released to Alturas, Pettit, and Redfish lakes in October; (3) age-1 smolts were released into Redfish Lake Creek and the upper Salmon River in May; and (4) hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September. Oncorhynchus nerka population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September 2007. Population abundances were estimated at 73,702 fish for Redfish Lake, 124,073 fish for Alturas Lake, and 14,746 fish for Pettit Lake. Angler surveys were conducted from May 26 through August 7, 2007 on Redfish Lake to estimate kokanee harvest. On Redfish Lake, we interviewed 102 anglers and estimated that 56 kokanee were harvested. The calculated kokanee catch rate was 0.03 fish/hour for each kokanee kept. The juvenile out-migrant trap on Redfish Lake Creek was operated from April 14 to June 13, 2007. We estimated that 5,280 natural origin and 14,256 hatchery origin sockeye salmon smolts out-migrated from

  9. The return trip is felt shorter only postdictively: A psychophysiological study of the return trip effect [corrected].

    Directory of Open Access Journals (Sweden)

    Ryosuke Ozawa

    Full Text Available The return trip often seems shorter than the outward trip even when the distance and actual time are identical. To date, studies on the return trip effect have failed to confirm its existence in a situation that is ecologically valid in terms of environment and duration. In addition, physiological influences as part of fundamental timing mechanisms in daily activities have not been investigated in the time perception literature. The present study compared round-trip and non-round-trip conditions in an ecological situation. Time estimation in real time and postdictive estimation were used to clarify the situations where the return trip effect occurs. Autonomic nervous system activity was evaluated from the electrocardiogram using the Lorenz plot to demonstrate the relationship between time perception and physiological indices. The results suggest that the return trip effect is caused only postdictively. Electrocardiographic analysis revealed that the two experimental conditions induced different responses in the autonomic nervous system, particularly in sympathetic nervous function, and that parasympathetic function correlated with postdictive timing. To account for the main findings, the discrepancy between the two time estimates is discussed in the light of timing strategies, i.e., prospective and retrospective timing, which reflect different emphasis on attention and memory processes. Also each timing method, i.e., the verbal estimation, production or comparative judgment, has different characteristics such as the quantification of duration in time units or knowledge of the target duration, which may be responsible for the discrepancy. The relationship between postdictive time estimation and the parasympathetic nervous system is also discussed.

  10. Integration of auto analysis program of gamma spectrum and software and determination of element content in sample by k-zero method

    International Nuclear Information System (INIS)

    Trinh Quang Vinh; Truong Thi Hong Loan; Mai Van Nhon; Huynh Truc Phuong

    2014-01-01

    Integrating the gamma spectrum auto-analysis program with elemental analysis software by k-zero method is the objective for many researchers. This work is the first stepin building an auto analysis program of gamma spectrum, which includes modules of reading spectrum, displaying spectrum, calibrating energy of peak, smoothing spectrum, calculating peak area and determining content of elements in sample. Then, the results from the measurements of standard samples by a low level spectrometer using HPGe detector are compared to those of other gamma spectrum auto-analysis programs. (author)

  11. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2001 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Hebdon, J. Lance; Castillo, Jason; Willard, Catherine (Idaho Department of Fish and Game, Boise, ID)

    2003-12-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes and Idaho Department of Fish and Game initiated the Snake River Sockeye Salmon Sawtooth Valley Project to conserve and rebuild populations in Idaho. Restoration efforts are focusing on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced juvenile sockeye salmon from the captive broodstock program occurred in 1994. The first anadromous adult returns from the captive broodstock program were recorded in 1999, when six jacks and one jill were captured at Idaho Department of Fish and Game's Sawtooth Fish Hatchery. In 2001, progeny from the captive broodstock program were released using four strategies: age-0 presmolts were released to all three lakes in October and to Pettit and Alturas lakes in July; age-1 smolts were released to Redfish Lake Creek, and hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September along with anadromous adult sockeye salmon that returned to the Sawtooth basin and were not incorporated into the captive broodstock program. Kokanee population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September. Only age-0 and age-1 kokanee were captured on Redfish Lake, resulting in a population estimate of 12,980 kokanee. This was the second lowest kokanee abundance estimated since 1990. On Alturas Lake age-0, age-1, and age-2 kokanee were captured, and the kokanee population was estimated at 70,159. This is a mid range kokanee population estimate for Alturas Lake, which has been sampled yearly since 1990. On Pettit Lake only age-1 kokanee were captured, and the kokanee population estimate was 16,931. This estimate is in the midrange of estimates of the kokanee population in Pettit Lake, which has been sampled

  12. Human Research Program Human Health Countermeasures Element: Evidence Report - Artificial Gravity

    Science.gov (United States)

    Clement, Gilles

    2015-01-01

    The most serious risks of long-duration flight involve radiation, behavioral stresses, and physiological deconditioning. Artificial gravity (AG), by substituting for the missing gravitational cues and loading in space, has the potential to mitigate the last of these risks by preventing the adaptive responses from occurring. The rotation of a Mars-bound spacecraft or an embarked human centrifuge offers significant promise as an effective, efficient multi-system countermeasure against the physiological deconditioning associated with prolonged weightlessness. Virtually all of the identified risks associated with bone loss, muscle weakening, cardiovascular deconditioning, and sensorimotor disturbances might be alleviated by the appropriate application of AG. However, experience with AG in space has been limited and a human-rated centrifuge is currently not available on board the ISS. A complete R&D program aimed at determining the requirements for gravity level, gravity gradient, rotation rate, frequency, and duration of AG exposure is warranted before making a decision for implementing AG in a human spacecraft.

  13. Corrosion surveillance program of aluminum spent fuel elements in wet storage sites

    International Nuclear Information System (INIS)

    Linardi, E; Haddad, R

    2012-01-01

    Due to different degradation issues observed in aluminum-clad spent fuel during long term storage in water, the IAEA implemented in 1996 a Coordinated Research Project (CRP) and a Regional Project for Latin America, on Corrosion of Research Reactor Aluminum Clad Spent Fuel in Water. Argentine has been among the participant countries of these projects, carrying out spent fuel corrosion surveillance activities in its storage facilities. As a result of the research a large database on corrosion of aluminum-clad fuel has been generated. It was determined that the main types of corrosion affecting the spent fuel are pitting and galvanic corrosion due to contact with stainless steel. It was concluded that the quality of the water is the critical factor to control in a spent fuel storage facility. Another phase of the program is being conducted currently, which began in 2011 with the immersion of test racks in the RA1 reactor pool, and in the Research Reactor Spent Fuel Storage Facility (FACIRI), located in Ezeiza Atomic Center. This paper presents the results of the chemical analysis of the water performed so far, and its relationship with the examination of the coupons extracted from the sites (author)

  14. Snake River Sockeye Salmon Captive Broodstock Program; Research Element, 2003 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Willard, Catherine; Plaster, Kurtis; Castillo, Jason (Idaho Department of Fish and Game, Boise, ID)

    2005-01-01

    On November 20, 1991, the National Oceanic Atmospheric Administration listed Snake River sockeye salmon Oncorhynchus nerka as endangered under the Endangered Species Act of 1973. In 1991, the Shoshone-Bannock Tribes (SBT) and Idaho Department of Fish and Game (IDFG) initiated the Snake River Sockeye Salmon Captive Broodstock Program to conserve and rebuild populations in Idaho. Restoration efforts are focused on Redfish, Pettit, and Alturas lakes within the Sawtooth Valley. The first release of hatchery-produced adults occurred in 1993. The first release of juvenile sockeye salmon from the captive broodstock program occurred in 1994. In 1999, the first anadromous adult returns from the captive broodstock program were recorded when six jacks and one jill were captured at the IDFG Sawtooth Fish Hatchery. In 2003, progeny from the captive broodstock program were released using three strategies: eyed-eggs were planted in Pettit and Alturas lakes in November and December, age-0 presmolts were released to Alturas, Pettit, and Redfish lakes in October, and hatchery-produced adult sockeye salmon were released to Redfish Lake for volitional spawning in September. Oncorhynchus nerka population monitoring was conducted on Redfish, Alturas, and Pettit lakes using a midwater trawl in September 2003. Age-0 through age-4 O. nerka were captured in Redfish Lake, and population abundance was estimated at 81,727 fish. Age-0 through age-3 O. nerka were captured in Alturas Lake, and population abundance was estimated at 46,234 fish. Age-0 through age-3 O. nerka were captured in Pettit Lake, and population abundance was estimated at 11,961 fish. Angler surveys were conducted from May 25 through August 7, 2003 on Redfish Lake to estimate kokanee harvest. On Redfish Lake, we interviewed 179 anglers and estimated that 424 kokanee were harvested. The calculated kokanee catch rate was 0.09 fish/hour. The juvenile out-migrant trap on Redfish Lake Creek was operated from April 15 to May 29

  15. American Samoa Commercial Purchases (Trip Ticket)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In 1990 the local government made it mandatory for local vendors to participate in this monitoring program and it is continuing. The Department of Marine and...

  16. An Overview of the NASA Aviation Safety Program (AVSP) Systemwide Accident Prevention (SWAP) Human Performance Modeling (HPM) Element

    Science.gov (United States)

    Foyle, David C.; Goodman, Allen; Hooley, Becky L.

    2003-01-01

    An overview is provided of the Human Performance Modeling (HPM) element within the NASA Aviation Safety Program (AvSP). Two separate model development tracks for performance modeling of real-world aviation environments are described: the first focuses on the advancement of cognitive modeling tools for system design, while the second centers on a prescriptive engineering model of activity tracking for error detection and analysis. A progressive implementation strategy for both tracks is discussed in which increasingly more complex, safety-relevant applications are undertaken to extend the state-of-the-art, as well as to reveal potential human-system vulnerabilities in the aviation domain. Of particular interest is the ability to predict the precursors to error and to assess potential mitigation strategies associated with the operational use of future flight deck technologies.

  17. Sinking fluxes of minor and trace elements in the North Pacific Ocean measured during the VERTIGO program

    Science.gov (United States)

    Lamborg, C. H.; Buesseler, K. O.; Lam, P. J.

    2008-07-01

    As part of the Vertical Transport in the Global Ocean (VERTIGO) program, we collected and analyzed sinking particles using sediment traps at three depths in the oceanic mesopelagic zone and at two biogeochemically contrasting sites (N. Central Pacific at ALOHA; N. Pacific Western Subarctic Gyre at K2). In this paper, we present the results of minor and trace element determinations made on these samples. Minor and trace elements in the sinking material showed 2 trends in flux with depth: increasing and constant. The sinking particulate phase of some elements (Al, Fe, Mn) was dominated by material of lithogenic origin and exhibited flux that was constant with depth and consistent with eolian dust inputs (ALOHA), or increasing in flux with depth as a result of lateral inputs from a shelf (K2). This shelf-derived material also appears to have been confined to very small particles, whose inherent sinking rates are slow, and residence time within the mesopelagic "twilight zone" would be consequently long. Furthermore, the flux of this material did not change with substantial changes in the rain of biogenic material from the surface (K2), suggesting mechanistic decoupling from the flux of organic carbon and macronutrients. Micronutrient (Fe, Co, Zn and Cu) fluxes examined in a 1-D mass balance suggest widely differing sources and sinks in the water column as well as impacts from biological uptake and regeneration. For example, total Fe fluxes into and out of the euphotic zone appeared to be dominated by lithogenic material and far exceed biological requirements. The export flux of Fe, however, appeared to be balanced by the eolian input of soluble Fe. For Zn and Cu, the situation is reversed, with atmospheric inputs insufficient to support fluxes, and the cycling therefore dominated by the draw down of an internal pool. For Co, the situation lies in between, with important, but ultimately insufficient atmospheric inputs.

  18. Finite element historical deformation analysis in piecewise linear plasticity by mathematical programming

    International Nuclear Information System (INIS)

    De Donato, O.; Parisi, M.A.

    1977-01-01

    When loads increase proportionally beyond the elastic limit in the presence of elastic-plastic piecewise-linear constitutive laws, the problem of finding the whole evolution of the plastic strain and displacements of structures was recently shown to be amenable to a parametric linear complementary problem (PLCP) in which the parameter is represented by the load factor, the matrix is symmetric positive definite or at least semi-definite (for perfect plasticity) and the variables with a direct mechanical meaning are the plastic multipliers. With reference to plane trusses and frames with elastic-plastic linear work-hardening material behaviour numerical solutions were also fairly efficiently obtained using a recent mathematical programming algorithm (due to R.W. Cottle) which is able to provide the whole deformation history of the structure and, at the same time to rule out local unloadings along the given proportional loading process by means of 'a priori' checks carried out before each pivotal step of the procedure. Hence it becomes possible to use the holonomic (reversible, path-independent) constitutive laws in finite terms and to benefit by all the relevant numerical and computational advantages despite the non-holonomic nature of plastic behaviour. In the present paper the method of solution is re-examined in view to overcome an important drawback of the algorithm deriving from the size of PLCP fully populated matrix when structural problems with large number of variables are considered and, consequently, the updating, the storing or, generally, the handling of the current tableau may become prohibitive. (Auth.)

  19. Mode, load, and specific climate impact from passenger trips.

    Science.gov (United States)

    Borken-Kleefeld, Jens; Fuglestvedt, Jan; Berntsen, Terje

    2013-07-16

    The climate impact from a long-distance trip can easily vary by a factor of 10 per passenger depending on mode choice, vehicle efficiency, and occupancy. In this paper we compare the specific climate impact of long-distance car travel with coach, train, or air trips. We account for both, CO2 emissions and short-lived climate forcers. This particularly affects the ranking of aircraft's climate impact relative to other modes. We calculate the specific impact for the Global Warming Potential and the Global Temperature Change Potential, considering time horizons between 20 and 100 years, and compare with results accounting only for CO2 emissions. The car's fuel efficiency and occupancy are central whether the impact from a trip is as high as from air travel or as low as from train travel. These results can be used for carbon-offsetting schemes, mode choice and transportation planning for climate mitigation.

  20. Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels

    International Nuclear Information System (INIS)

    Bhargava, M; Asim, T; Sushil, M; Shanta, C

    2015-01-01

    Automotive industry is currently focusing on using advanced high strength steels (AHSS) due to its high strength and formability for closure applications. Transformation Induced Plasticity (TRIP) steel is promising material for this application among other AHSS. The present work is focused on the microstructure development during deformation of TRIP steel sheets. To mimic complex strain path condition during forming of automotive body, Limit Dome Height (LDH) tests were conducted and samples were deformed in servo hydraulic press to find the different strain path. FEM Simulations were done to predict different strain path diagrams and compared with experimental results. There is a significant difference between experimental and simulation results as the existing material models are not applicable for TRIP steels. Micro texture studies were performed on the samples using EBSD and X-RD techniques. It was observed that austenite is transformed to martensite and texture developed during deformation had strong impact on limit strain and strain path. (paper)

  1. Texture developed during deformation of Transformation Induced Plasticity (TRIP) steels

    Science.gov (United States)

    Bhargava, M.; Shanta, C.; Asim, T.; Sushil, M.

    2015-04-01

    Automotive industry is currently focusing on using advanced high strength steels (AHSS) due to its high strength and formability for closure applications. Transformation Induced Plasticity (TRIP) steel is promising material for this application among other AHSS. The present work is focused on the microstructure development during deformation of TRIP steel sheets. To mimic complex strain path condition during forming of automotive body, Limit Dome Height (LDH) tests were conducted and samples were deformed in servo hydraulic press to find the different strain path. FEM Simulations were done to predict different strain path diagrams and compared with experimental results. There is a significant difference between experimental and simulation results as the existing material models are not applicable for TRIP steels. Micro texture studies were performed on the samples using EBSD and X-RD techniques. It was observed that austenite is transformed to martensite and texture developed during deformation had strong impact on limit strain and strain path.

  2. Are short daily trips compensated by higher leisure mobility?

    DEFF Research Database (Denmark)

    Næss, Petter

    2006-01-01

    Studies in several cities have shown that inner-city residents travel shorter distances and use cars less for local transport than suburbanites do. However, according to some authors, a low daily amount of travel is likely to be compensated through more extensive leisure mobility at weekends...... and on holidays. On the basis of a study of residential location and travel in the Copenhagen metropolitan area, this paper addresses the phenomenon of compensatory travel. For travel within ‘weekend trip distance’ from the residence, inner-city living appears to have a certain compensatory effect in the form...... of a higher frequency of medium-distance leisure trips. Probably, this reflects a shortage of nature in the immediate surroundings of the dwelling as well as less leisure time tied to gardening and house maintenance. These compensatory trips imply a slight reduction of the transport-reducing effect of inner...

  3. Analysis of reactor trips involving balance-of-plant failures

    International Nuclear Information System (INIS)

    Seth, S.; Skinner, L.; Ettlinger, L.; Lay, R.

    1986-01-01

    The relatively high frequency of plant transients leading to reactor trips at nuclear power plants in the US is of economic and safety concern to the industry. A majority of such transients is due to failures in the balance-of-plant (BOP) systems. As a part of a study conducted for the US Nuclear Regulatory Commission, Mitre has carried out a further analysis of the BOP failures associated with reactor trips. The major objectives of the analysis were to examine plant-to-plant variations in BOP-related trips, to understand the causes of failures, and to determine the extent of any associated safety system challenges. The analysis was based on the Licensee Event Reports submitted on all commercial light water reactors during the 2-yr period, 1984-1985

  4. Transforming an Exposure trip to Botanical Expedition: Introducing Ecological Research thru Exposure Trip in an Eco-tourism Site

    Directory of Open Access Journals (Sweden)

    Bernardo C. Lunar

    2014-10-01

    Full Text Available – Fieldtrips can be considered as one of the three avenues through which science can be taught - through formal classroom teaching, practical work and field trips. An exposure trip at Bangkong Kahoy Valley Field Study Center was arranged for a class of BS Biology and BS Education students enrolled in Ecology Course. This approach purposefully transformed the usual exposure trip from being a casual site visit into a focused and productive learning experience. This transformation from exposure trip to a botanical expedition has exceeded the initial activity goals. Rather than a day off from learning, the time spent at the study center has been a meaningful opportunity to engage students in an active ecological research project while delivering valuable science content. Employing the descriptive survey design, the learning gains of the students were assessed and students were directed to do a guided reflection writing using the ORID Model of Focused Conversation. The learning gains and reflections of the students confirmed that students can collaboratively develop focused research questions, make meaning from a variety of sources, carry out a vegetation analysis and conduct surveys on socio-economic status, plant resource utilization and ecotourism assessment of the host community. As students prepared for their trip and synthesized their learning afterward, they were able to come up with very impressive and scientifically sound research outputs.

  5. Field trip guidebook for the post-meeting field trip: The Central Appalachians

    Science.gov (United States)

    Taylor, John F.; Loch, James D.; Ganis, G. Robert; Repetski, John E.; Mitchell, Charles E.; Blackmer, Gale C.; Brezinski, David K.; Goldman, Daniel; Orndorff, Randall C.; Sell, Bryan K.

    2015-01-01

    The lower Paleozoic rocks to be examined on this trip through the central Appalachians represent an extreme range of depositional environments. The lithofacies we will examine range from pelagic radiolarian chert and interbedded mudstone that originated on the deep floor of the Iapetus Ocean, through mud cracked supratidal dolomitic laminites that formed during episodes of emergence of the long-lived Laurentian carbonate platform, to meandering fluvial conglomerate and interstratified overbank mudstone packages deposited in the latest stages of infilling of the Taconic foredeep. In many ways this field trip is about contrasts. The Upper Cambrian (Furongian) and Lower Ordovician deposits of the Sauk megasequence record deposition controlled primarily by eustatic sea level sea level fluctuations that influenced deposition along the passive, southern (Appalachian) margin of the paleocontinent of Laurentia. The only tectonic influence apparent in these passive margin deposits is the expected thickening of the carbonate stack toward the platform margin as compared to the thinner (and typically shallower) facies that formed farther in toward the paleoshoreline. Carbonates overwhelmingly dominate the passive margin succession. Clastic influx was minimal and consisted largely of eastward transport of clean cratonic sands across the platform from the adjacent inner detrital belt to the west during higher order (2nd and 3rd order) regressions.In contrast, Middle and Upper Ordovician deposits of the Tippecanoe megasequence record the strong influence of tectonics, specifically Iapetus closure. The first signal of this tectonic transformation was the arrival of arc-related ash beds that abound in the active margin carbonates. Subsequent intensification of Taconic orogenesis resulted in the foundering of the carbonate platform under the onslaught of fine siliciclastics arriving from offshore tectonic sources to the east, creating a deep marine flysch basin where graptolitic

  6. WTO ministerial conference adopts declaration on TRIPS and public health.

    Science.gov (United States)

    Elliott, Richard

    2002-03-01

    In November 2001, the 4th Ministerial Conference of the World Trade Organization adopted a Ministerial Declaration on public health and the WTO's Agreement on Trade-Related Aspects of Intellectual Property Rights (the "TRIPS Agreement"). The declaration represents a modest advance in addressing concerns that strict patent laws, and threats of trade sanctions, will be a barrier to most of the world's people with HIV/AIDS accessing affordable medicines. The full significance of the declaration remains to be seen, as it depends on what political impact it has at the WTO and on its member countries, and what legal impact it will have in the interpretation of the TRIPS Agreement.

  7. A simplified approach to detect undervoltage tripping of wind generators

    Energy Technology Data Exchange (ETDEWEB)

    Sigrist, Lukas; Rouco, Luis [Universidad Pontificia Comillas, Madrid (Spain). Inst. de Investigacion Tecnologica

    2012-07-01

    This paper proposes a simplified but fast approach based on a Norton equivalent of wind generators to detect undervoltage tripping of wind generators. This approach is successfully applied to a real wind farm. The relevant grid code requires the wind farm to withstand a voltage dip of 0% retained voltage. The ability of the wind generators to raise the voltage supplying reactive current and to avoid undervoltage tripping is investigated. The obtained results are also compared with the results obtained from detailed dynamic simulations, which make use of wind generator models complying with the relevant grid code. (orig.)

  8. Intensive medical student involvement in short-term surgical trips provides safe and effective patient care: a case review

    Directory of Open Access Journals (Sweden)

    Macleod Jana B

    2011-09-01

    Full Text Available Abstract Background The hierarchical nature of medical education has been thought necessary for the safe care of patients. In this setting, medical students in particular have limited opportunities for experiential learning. We report on a student-faculty collaboration that has successfully operated an annual, short-term surgical intervention in Haiti for the last three years. Medical students were responsible for logistics and were overseen by faculty members for patient care. Substantial planning with local partners ensured that trip activities supplemented existing surgical services. A case review was performed hypothesizing that such trips could provide effective surgical care while also providing a suitable educational experience. Findings Over three week-long trips, 64 cases were performed without any reported complications, and no immediate perioperative morbidity or mortality. A plurality of cases were complex urological procedures that required surgical skills that were locally unavailable (43%. Surgical productivity was twice that of comparable peer institutions in the region. Student roles in patient care were greatly expanded in comparison to those at U.S. academic medical centers and appropriate supervision was maintained. Discussion This demonstration project suggests that a properly designed surgical trip model can effectively balance the surgical needs of the community with an opportunity to expose young trainees to a clinical and cross-cultural experience rarely provided at this early stage of medical education. Few formalized programs currently exist although the experience above suggests the rewarding potential for broad-based adoption.

  9. The development of cause analysis system for CPCS trip using the rule-base deduction

    International Nuclear Information System (INIS)

    Park, Hee Seok; Kim, Dong Hoon; Seo, Ho Joon; Koo, In Soo; Park, Suk Joon

    1992-01-01

    The Core Protection Calculator System(CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by Combustion Engineering Company. The major function of the CPCS is to generate contact outputs for the Departure from Nucleate Boiling Ratio(DNBR) Trip and Local Power Density(LPD) Trip. But in CPCS the trip causes can not be identified, only trip status is displayed. It may take much time and efforts for plant operator to analyse the trip causes of CPCS. So, the Cause Analysis System for CPCS(CASCPCS) has been developed using the rule-base deduction method to aid the operators in Nuclear Power Plant

  10. A study on design of the trip computer for ECCS based on dynamic safety system

    International Nuclear Information System (INIS)

    Kim, Seog Nam

    2000-02-01

    The Emergency Core Cooling system in current nuclear power plants typically has a considerable number of complex functions and largely cumbersome operator interfaces. Functions for initiation, switch-over between various phases of operation, interlocks, monitoring, and alarming are usually performed by relay and analog comparator logic which is difficult to maintain and test. To improve problems of an analog based ECC (Emergency Core Cooling) System, the trip computer for ECCS based on Dynamic Safety System is implemented. The Dynamic Safety System (DSS) is a computer based reactor protection system that has fail-safe nature and performs a dynamic self-testing. The most important feature of the DSS is the introduction of test signal that send the system into a tripped state. The test signals are interleaved between the plant signals to produce an output which switches between a tripped and health state. The dynamic operation is a key feature of the failsafe design of the system. In this thesis, a possible implementation of the DSS using PLC is presented for a CANDU reactor. ECC System of the CANDU Reactor is selected as the reference system. The function of the DSS is implemented In PLC with the CONCEPT language. CONCEPT was developed by GROUPE SCHNEIDER as a graphic user interface programming tool for the Quantum PLC. A MMI display for ECCS based on DSS is implemented with LOOKOUT as an object driven programming tool. The Validation test has been performed by S/W Input Simulator as per Validation Test Procedure. The result of the test was checked and displayed on the MMI display. From the test results, it is shown that the DSS based ECC System operates correctly in all conditions

  11. Hot Ductility and Compression Deformation Behavior of TRIP980 at Elevated Temperatures

    Science.gov (United States)

    Zhang, Mei; Li, Haiyang; Gan, Bin; Zhao, Xue; Yao, Yi; Wang, Li

    2018-02-01

    The hot ductility tests of a kind of 980 MPa class Fe-0.31C (wt pct) TRIP steel (TRIP980) with the addition of Ti/V/Nb were conducted on a Gleeble-3500 thermomechanical simulator in the temperatures ranging from 873 K to 1573 K (600 °C to 1300 °C) at a constant strain rate of 0.001 s-1. It is found that the hot ductility trough ranges from 873 K to 1123 K (600 °C to 850 °C). The recommended straightening temperatures are from 1173 K to 1523 K (900 °C to 1250 °C). The isothermal hot compression deformation behavior was also studied by means of Gleeble-3500 in the temperatures ranging from 1173 K to 1373 K (900 °C to 1100 °C) at strain rates ranging from 0.01 s-1 to 10 s-1. The results show that the peak stress decreases with the increasing temperature and the decreasing strain rate. The deformation activation energy of the test steel is 436.7 kJ/mol. The hot deformation equation of the steel has been established, and the processing maps have been developed on the basis of experimental data and the principle of dynamic materials model (DMM). By analyzing the processing maps of strains of 0.5, 0.7, and 0.9, it is found that dynamic recrystallization occurs in the peak power dissipation efficiency domain, which is the optimal area of hot working. Finally, the factors influencing hot ductility and thermal activation energy of the test steel were investigated by means of microscopic analysis. It indicates that the additional microalloying elements play important roles both in the loss of hot ductility and in the enormous increase of deformation activation energy for the TRIP980 steel.

  12. Journal of South African Trip: January 14-March 1, 1986.

    Science.gov (United States)

    Rogers, Carl R.

    1987-01-01

    Provides a personal account, dictated en route, of Carl Rogers' experiences during his trip to South Africa. Documents extensive commitment to people and to a process leading to peace. Journal ends with conviction that violence can be avoided and that no group really wants violence. (Author)

  13. Sense of place in outdoor-pursuits trip groups

    Science.gov (United States)

    Sharon L. Todd; Anderson B. Young; Lynn S. Anderson; Timothy S. O' Connell; Mary Breunig

    2009-01-01

    Studies have revealed that sense of community and group cohesion increase significantly over time in outdoor-pursuits trip groups. This study sought to understand similar development of sense of place. Do people simultaneously become more attached to or dependent on the natural environment as they grow closer to each other? Results from a study of college students...

  14. Evidence Based Prevention of Occupational Slips, Trips and Falls

    DEFF Research Database (Denmark)

    Jensen, Olaf Chresten

    2009-01-01

    It is estimated that about one third of the compensated occupational injuries and half of the most serious occupational injuries in merchant seafaring are related to slips, trips and falls (STF)-events. Among the elderly, STF is the risk factor that causes the largest number of inpatient days...

  15. Trip Reports. Hazardous Waste Minimization and Control at Army Depots

    Science.gov (United States)

    1989-08-01

    Chief, Building 114; Major Robert Ronne; and Ken Rollins, Section Chief, Building 409. The purpose of this trip report Is to document the Information...hazardous. 6. Wf-TIM WOR Feosbility of a suitable p-etresaent f waste cuttins oil and sulleln coolant loach as 4iltratlan to remove metals. removal

  16. Field trips as an intervention to enhance pharmacy students' positive ...

    African Journals Online (AJOL)

    To determine whether students' experience of field trips influenced their perceptions regarding a management module as part of their training as future pharmacists. Methods. A mixed-method sequential exploratory research design was used. Data were gathered through written narratives and focus group interviews, ...

  17. The LEP RF Trip and Beam Loss Diagnostics System

    CERN Document Server

    Arnaudon, L; Beetham, G; Ciapala, Edmond; Juillard, J C; Olsen, R

    2002-01-01

    During the last years of operation the number of operationally independent RF stations distributed around LEP reached a total of 40. A serious difficulty when running at high energy and high beam intensities was to establish cause and effect in beam loss situations, where the trip of any single RF station would result in beam loss, rapidly producing further multiple RF station trips. For the last year of operation a fast post-mortem diagnostics system was developed to allow precise time-stamping of RF unit trips and beam intensity changes. The system was based on eight local DSP controlled fast acquisition and event recording units, one in each RF sector, connected to critical RF control signals and fast beam intensity monitors and synchronised by GPS. The acquisition units were armed and synchronised at the start of each fill. At the end of the fill the local time-stamped RF trip and beam intensity change history tables were recovered, events ordered and the results stored in a database for subsequent analys...

  18. The Field Trip Book: Study Travel Experiences in Social Studies

    Science.gov (United States)

    Morris, Ronald V.

    2010-01-01

    Looking for social studies adventures to help students find connections to democratic citizenship? Look no further! This book provides just the answer teachers need for engaging students in field trips as researching learners with emphasis on interdisciplinary social studies plus skills in collecting and reporting data gathered from field…

  19. The Euler-Mascheroni Constant and The Car Talk Trip

    Science.gov (United States)

    Lynch, Frank H.; Page, Breeanna S.

    2018-01-01

    This paper uses the lens of a calculus student to examine different solutions to a weekly puzzler from the radio show "Car Talk," hosted by Tom and Ray Magliozzi. The puzzler describes an automobile that is traveling 75 miles per hour and is 75 miles from its destination. The trip is completed by traveling 1 mile at 75 miles per hour, 1…

  20. Astronauts Armstrong and Aldrin study rock samples during field trip

    Science.gov (United States)

    1969-01-01

    Astronaut Neil Armstrong, commander of the Apollo 11 lunar landing mission, and Astronaut Edwin Aldrin, Lunar module pilot for Apollo 11, study rock samples during a geological field trip to the Quitman Mountains area near the Fort Quitman ruins in far west Texas.

  1. What drives people? Analyzing leisure-shopping trip decision making

    NARCIS (Netherlands)

    de Ceunynck, T.; Kusumastuti, Diana; Hannes, E.; Janssens, D.; Wets, G.

    2011-01-01

    Because of the strong increase in the number of leisure-shopping trips, a shift towards more sustainable leisure-shopping behaviour is desirable. This can be attained by having a better insight into people’s reasoning in choosing a transport mode and shopping location for this type of activities.

  2. PERSPECTIVE: The tripping points of sea level rise

    Science.gov (United States)

    Hecht, Alan D.

    2009-12-01

    When President Nixon created the US Environmental Protection Agency (EPA) in 1970 he said the environment must be perceived as a single, interrelated system. We are nowhere close to achieving this vision. Jim Titus and his colleagues [1] highlight one example of where one set of regulations or permits may be in conflict with another and where regulations were crafted in the absence of understanding the cumulative impact of global warming. The issue here is how to deal with the impacts of climate change on sea level and the latter's impact on wetland polices, clean water regulations, and ecosystem services. The Titus paper could also be called `The tripping points of sea level rise'. Titus and his colleagues have looked at the impact of such sea level rise on the east coast of the United States. Adaptive responses include costly large- scale investment in shore protection (e.g. dikes, sand replenishment) and/or ecosystem migration (retreat), where coastal ecosystems move inland. Shore protection is limited by available funds, while ecosystem migrations are limited by available land use. The driving factor is the high probability of sea level rise due to climate change. Estimating sea level rise is difficult because of local land and coastal dynamics including rising or falling land areas. It is estimated that sea level could rise between 8 inches and 2 feet by the end of this century [2]. The extensive data analysis done by Titus et al of current land use is important because, as they observe, `property owners and land use agencies have generally not decided how they will respond to sea level rise, nor have they prepared maps delineating where shore protection and retreat are likely'. This is the first of two `tripping points', namely the need for adaptive planning for a pending environmental challenge that will create economic and environment conflict among land owners, federal and state agencies, and businesses. One way to address this gap in adaptive management

  3. Elements of Dynamic Programming,

    Science.gov (United States)

    1981-02-02

    step/pitch lies in the fact that us ia .o eacerprise P, cf means x". to enter.rise P2 - means xan sc L Jsing widely used teraiAo.j, :onrrol U, it is... acca ~acj ,,L ra sauticn of protlem. Is qenertity intuitively it ii cliax thi-t with at. increat-e in the number aoc = 80151502 FAG E of stips/pitches...Ad.aua inccme W*.. 5S on the ,raph/curve Fig. 9.10 bitn ;.A Leut Z, = 0.75.x2 + 0.3 (Z, - xl); it is obtained value w. 4 . .o.& acca ayq.n they are

  4. CNMI, American Samoa, and Guam Small Boat Fishery Trip Expenditure (2009 to present)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This is a time-series dataset of trip expenditure data including actual fishing trip expenses, input usage, and input prices, for boat-based reef fish, bottomfish,...

  5. Improved trip generation data for Texas using workplace and special generator surveys : workshop materials.

    Science.gov (United States)

    2014-08-01

    Workshop Objectives: : Present Texas Trip Generation Manual : How developed : How it can be used, built upon : Provide examples and discuss : Present Generic WP Attraction Rates : Review Trip Attractions and Advanced Models

  6. Getting the engine started: motivations for participation in a university outdoor recreation program

    Science.gov (United States)

    Ryan L. Sharp; Craig A. Miller

    2009-01-01

    This study was conducted to identify the motivations of trip participants in the Georgia Outdoor Recreation Program at the University of Georgia during the fall semester of 2007, and to collect baseline data about their participation. Participants were asked to fill out a survey and return it to the trip leader at the conclusion of each trip. Participants'...

  7. Basic Finite Element Method

    International Nuclear Information System (INIS)

    Lee, Byeong Hae

    1992-02-01

    This book gives descriptions of basic finite element method, which includes basic finite element method and data, black box, writing of data, definition of VECTOR, definition of matrix, matrix and multiplication of matrix, addition of matrix, and unit matrix, conception of hardness matrix like spring power and displacement, governed equation of an elastic body, finite element method, Fortran method and programming such as composition of computer, order of programming and data card and Fortran card, finite element program and application of nonelastic problem.

  8. Automatic Trip Detection with the Dutch Mobile Mobility Panel: Towards Reliable Multiple-Week Trip Registration for Large Samples

    NARCIS (Netherlands)

    Thomas, Tom; Geurs, Karst T.; Koolwaaij, Johan; Bijlsma, Marcel E.

    2018-01-01

    This paper examines the accuracy of trip and mode choice detection of the last wave of the Dutch Mobile Mobility Panel, a large-scale three-year, smartphone-based travel survey. Departure and arrival times, origins, destinations, modes, and travel purposes were recorded during a four week period in

  9. Trip Generations at “Polyclinic” Land Use Type in Johor Bahru, Malaysia

    OpenAIRE

    Ahmed, Ishtiaque; Abdulrahman, Suleiman; Hainin, Mohd Rosli; Hassan, Sitti Asmah

    2014-01-01

    Transportation planners need to estimate the trip generations of different land use types in the travel demand forecasting process. The Trip Generation Manual of Malaysia, similar to the Trip Generation Manual of the Institute of Transportation Engineers, USA, provides the trip generation rate at “Polyclinics” as a function of the Gross Floor Area. However, the data for this rate have no line of best fit resulting in the lack of confidence in the prediction. This study considered ten location...

  10. CASTEM: a system of finite element computer programs for elastic and inelastic analysis of mechanical structures of reactors

    International Nuclear Information System (INIS)

    Hoffmann, A.; Livolant, M.; Roche, R.

    1978-01-01

    The nuclear research center at Saclay has developed the system of computer program CASTEM for the analysis of mechanical structures of reactors. This finite element system is designed specially to deal with nonlinear problems concerning both the material (plasticity, thermoplasticity, creep) and the geometry (nonlinear relationships between displacement and strain, buckling). Furthermore, a special effort has been devoted to the processing of dynamic problems (vibrations, natural modes, earthquakes, shock phenomena, etc..). The CASTEM system includes a large number of elementary modules corresponding to a total of over 80,000 Fortran instructions. Allowing the calculation of various structural geometries, including: axisymmetrical shells and liquids (with non axisymmetrical loading); pipes and frames; two-dimensional massive structures; three-dimensional shells; three-dimensional massive structures. Complex dynamic analysis can be made by combination of substructures natural mode shapes. Pre and post processors: automatic meshing, plotting of results, direct comparison of stresses to ASME limits make the use of the system easy and time saving

  11. Using GIS for planning field trips: In-situ assessment of Geopoints for field trips with mobile devices

    Science.gov (United States)

    Böhm, Sarah; Kisser, Thomas; Ditter, Raimund

    2016-04-01

    Up to now no application is existing for collecting data via mobile devices using a geographical information system referring to the evaluation of Geopoints. Classified in different geographical topics a Geopark can be rated for suitability of Geopoints for field trips. The systematically acquisition of the suitability of Geopoints is necessary, especially when doing field trips with lower grade students who see a physical-geographic phenomenon for the first time. For this reason, the development of such an application is an invention for easy handling evaluations of Geopoints on the basis of commonly valid criteria like esthetic attraction, interestingness, and pithiness (Streifinger 2010). Collecting data provides the opportunity of receiving information of particularly suitable Geopoints out of the sight from students, tourists and others. One solution for collecting data in a simple and intuitive form is Survey123 for ArcGIS (http://survey123.esri.com/#/). You can create surveys using an ArcGIS Online organizational account and download your own survey or surveys "that may have been shared with you" (https://itunes.apple.com/us/app/survey-123-for-arcgis/id993015031?mt=8) on your mobile device. "Once a form is downloaded, you will be able to start collecting data."(https://itunes.apple.com/us/app/survey-123-for-arcgis/id993015031?mt=8) Free of cost and use while disconnected the application can easily be used via mobile device on field trips. On a 3-day field trip which is held three times per year in the Geopark Bergstraße-Odenwald Survey123 is being used to evaluate the suitability of different Geopoints for different topics (geology, soils, vegetation, climate). With every field trip about 25 students take part in the survey and evaluate each Geopoint at the route. So, over the time, the docents know exactly which Geopoints suites perfect for teaching geology for example, and why it suites that good. The field trip is organized in an innovative way. Before

  12. Titanium by design: TRIP titanium alloy

    Science.gov (United States)

    Tran, Jamie

    elements in titanium to model the effect of alloying elements on the Ms temperature in titanium. Available atomic volume data and collaborative first principles quantum mechanical calculations are combined to model the composition dependence of the transformation molar volume change. Composition analysis of the beta phase from the LEAP and Bolling-Richman experimental measurement of the M ssigma temperature defining mechanical transformation stability of the beta phase in Ti5111 provided a calibration of transformation models. Using the near-alpha Ti5111 alloy as a reference alloy, the feasibility was assessed for application of transformation toughening to maintain the high toughness of Ti5111 at the higher 120ksi (827MPa) yield strength of Ti-6Al-4V. Combined with models of solution and grain refinement strengthening, a modification of the Ti5111 composition was designed meeting the transformation stability requirement while increasing the calculated transformation volume change by 10% for efficient toughening. A design prototype was created and mechanically tested resulting in a room temperature yield strength of >120ksi and M ssigma(ut) at room temperature confirming strength and transformation stability predictions.

  13. THE NETWORK OF CITY PUBLIC TRANSPORT AS THE BASE FOR TRIP LENGTH DISTRIBUTION DETERMINING

    Directory of Open Access Journals (Sweden)

    P. Horbachov

    2015-07-01

    Full Text Available The up-to-date methods of modelling the demand for public transport services require an objective estimation and improvement. Such an improvement can be achieved by taking into account the trip length distribution during trip matrix calculation that requires determining the reasons of regularities occurance in city population trip lengths.

  14. Questionnaire-based person trip visualization and its integration to quantitative measurements in Myanmar

    Science.gov (United States)

    Kimijiama, S.; Nagai, M.

    2016-06-01

    With telecommunication development in Myanmar, person trip survey is supposed to shift from conversational questionnaire to GPS survey. Integration of both historical questionnaire data to GPS survey and visualizing them are very important to evaluate chronological trip changes with socio-economic and environmental events. The objectives of this paper are to: (a) visualize questionnaire-based person trip data, (b) compare the errors between questionnaire and GPS data sets with respect to sex and age and (c) assess the trip behaviour in time-series. Totally, 345 individual respondents were selected through random stratification to assess person trip using a questionnaire and GPS survey for each. Conversion of trip information such as a destination from the questionnaires was conducted by using GIS. The results show that errors between the two data sets in the number of trips, total trip distance and total trip duration are 25.5%, 33.2% and 37.2%, respectively. The smaller errors are found among working-age females mainly employed with the project-related activities generated by foreign investment. The trip distant was yearly increased. The study concluded that visualization of questionnaire-based person trip data and integrating them to current quantitative measurements are very useful to explore historical trip changes and understand impacts from socio-economic events.

  15. Does ignoring multidestination trips in the travel cost method cause a systematic bias?

    NARCIS (Netherlands)

    Kuosmanen, T.K.; Nillesen, E.E.M.; Wesseler, J.H.H.

    2004-01-01

    The present paper demonstrates that treating multidestination trips (MDT) as single-destination trips does not involve any systematic upward or downward bias in consumer surplus (CS) estimates because the direct negative effect of a price increase (treating MDT as a single-destination trip) is

  16. The moderating role of shopping trip type in store satisfaction formation

    NARCIS (Netherlands)

    Hunneman, Auke; Verhoef, Pieter; Sloot, Laurentius

    Consumers may weigh store attributes differently depending on the type of shopping trip. For example, fill-in shoppers likely value convenience, due to the ad-hoc nature and urgency of such trips. However, no study has yet explored the effects of shopping trip types on satisfaction formation. This

  17. Nuevos atrayentes de trips ayudan a los agricultores en el control de plagas

    NARCIS (Netherlands)

    Tol, van R.W.H.M.; Kogel, de W.J.; Teulon, D.

    2007-01-01

    Los trips constituyen una plaga importante que afecta a muchos cultivos diferentes. El año pasado se probaron con éxito, en situaciones prácticas, aromas atrayentes de trips de las flores y trips de la cebolla. El producto, que estará a disposición de los cultivadores en junio, resultó efectivo en

  18. A PC-program for the calculation of neutron flux and element contents using the ki-method of neutron activation analysis

    International Nuclear Information System (INIS)

    Boulyga, E.G.; Boulyga, S.F.

    2000-01-01

    A computer program is described, which calculates the induced activities of isotopes after irradiation in a known neutron field, thermal and epithermal neutron fluxes from the measured induced activities and from nuclear data of 2-4 monitor nuclides as well as the element concentrations in samples irradiated together with the monitors. The program was developed for operation in Windows 3.1 (or higher). The application of the program for neutron activation analysis allows to simplify the experimental procedure and to reduce the time. The program was tested by measuring different types of standard reference materials at the FRJ-2 (Research Centre, Juelich, Germany) and Triga (University Mainz, Germany) reactors. Comparison of neutron flux parameters calculated by this program with those calculated by a VAX program developed at the Research Centre, Juelich was done. The results of testing seem to be satisfactory. (author)

  19. Evaluation of the setpoints of the overtemperature ΔT tripping function for Angra 1. PT.1

    International Nuclear Information System (INIS)

    1980-12-01

    This report is the first of two-part series that review the setpoints of the overtemperature ΔT tripping functions for Angra I. These results, obtained with a modidied COBRA-IIIC computer program version, are for typical subchannels in steady state situation or during short-term transients (min-hrs). In order to study the consequences of some approximations, the analysis started from model for DNBR calculation with an inadequate subchannels and equivalent rods array. For the determination of DNBR=1.30 curves a more realistic array was used. The overtemperature ΔT trip setpoints are conservatively below the DNBR=1.30 curves calculated in this part of the review. (author) [pt

  20. Harvesting Collective Trend Observations from Large Scale Study Trips

    DEFF Research Database (Denmark)

    Eriksen, Kaare; Ovesen, Nis

    2014-01-01

    To enhance industrial design students’ decoding and understanding of the technological possibilities and the diversity of needs and preferences in different cultures it is not unusual to arrange study trips where such students acquire a broader view to strengthen their professional skills and app...... numbers of students to the annual Milan Design Week and the Milan fair ‘I Saloni’ in Italy. The present paper describes and evaluates the method, the theory behind it, the practical execution of the trend registration, the results from the activities and future perspectives....... and approach, hence linking the design education and the design culture of the surrounding world. To improve the professional learning it is useful, though, to facilitate and organize the trips in a way that involves systematic data collection and reporting. This paper presents a method for facilitating study...

  1. Computer analysis on ANO-2 turbine trip test

    International Nuclear Information System (INIS)

    Senda, Yasuhide; Kanda, Keiji; McDonald, T.A.; Tessier, J.H.; Abramson, P.B.

    1983-01-01

    Safety analysis for nuclear power plants usually uses so detailed and large codes that it can be expensive and time-consuming. It is preferable to employ a simplified plant model to save cost and time. In this research, using RELAP5, a turbine trip test performed at Arkansas Nuclear One-Unit 2 (ANO-2) was analyzed with the simplified plant model in order to evaluate it for the turbine trip. Before the closure of the Main Steam Isolation Valve (MSIV), the calculation results agree well with the experimental data. After the MSIV closure, the results of the calculation explain the experimental data fairly well except for pressure recovery in the pressurizer. (author)

  2. Analysis of reactor trips originating in balance of plant systems

    International Nuclear Information System (INIS)

    Stetson, F.T.; Gallagher, D.W.; Le, P.T.; Ebert, M.W.

    1990-09-01

    This report documents the results of an analysis of balance-of-plant (BOP) related reactor trips at commercial US nuclear power plants of a 5-year period, from January 1, 1984, through December 31, 1988. The study was performed for the Plant Systems Branch, Office of Nuclear Reactor Regulation, US Nuclear Regulatory Commission. The objectives of the study were: to improve the level of understanding of BOP-related challenges to safety systems by identifying and categorizing such events; to prepare a computerized data base of BOP-related reactor trip events and use the data base to identify trends and patterns in the population of these events; to investigate the risk implications of BOP events that challenge safety systems; and to provide recommendations on how to address BOP-related concerns in regulatory context. 18 refs., 2 figs., 27 tabs

  3. Detailed analysis of the ANO-2 turbine trip test

    International Nuclear Information System (INIS)

    McDonald, T.A.; Tessier, J.H.; Senda, Y.; Waterman, M.D.

    1983-01-01

    A RELAP5/MOD1 (Cycle 18) computer code simulation of the ANO-2 turbine trip test from 98% power level was performed for use in vendor code qualification studies. Results focused on potential improvements to simulation capabilities and plant data acquisition systems to provide meaningful comparisons between the calculations and the test data. The turbine trip test was selected because it resulted in an unplanned sequence of events that broadly affected the plant process systems and their controls. The pressurizer spray valve stuck open at an undetermined flow area, and an atmospheric dump valve remained stuck fully open while several atmospheric dump and secondary side safety valves were unavailable throughout. Thus, although the plant remained always in a safe condition, this transient potentially provided an unusual set of data against which the fidelity of a NSSS simulation by RELAP5/MOD1 along with certain vendor analysis codes might be judged

  4. Progress of the Russian RERTR program: Development of new-type fuel elements for Russian-built research reactors

    International Nuclear Information System (INIS)

    Vatulin, A. V.; Stetskiy, Y.A.; Mishunin, V.A.; Suprun, V.B.; Dobrikova, I.V.

    2002-01-01

    The new design of pin-type fuel elements and fuel assembly on their basis for Russian research reactors has been developed. The number of following activities has been performed: computational and experimental substantiation of fuel element design; development of fabrication process of fuel elements; manufacturing of experimental assembly for lifetime in-pile tests. The relevant fuel assemblies are considered to be perspective for usage as low-enriched fuel for Russian research reactors. (author)

  5. Electronic Devices, Methods, and Computer Program Products for Selecting an Antenna Element Based on a Wireless Communication Performance Criterion

    DEFF Research Database (Denmark)

    2014-01-01

    A method of operating an electronic device includes providing a plurality of antenna elements, evaluating a wireless communication performance criterion to obtain a performance evaluation, and assigning a first one of the plurality of antenna elements to a main wireless signal reception...... and transmission path and a second one of the plurality of antenna elements to a diversity wireless signal reception path based on the performance evaluation....

  6. Marketing a destination: Case of CreateTrips and Mexico

    OpenAIRE

    Tiainen, Johanna; Korvenpää, Emmi

    2015-01-01

    This thesis concentrates on Finnish people travelling to Mexico. Firstly, the writers conduct a quantitative research, a questionnaire, that studies Finnish people’s thoughts and presumptions about Mexico. Secondly, they create mobile travel guides of four different destinations. The questionnaire concentrates on the people’s point of view, asking what people think about Mexico, on what kind of trip would they go it they travel there, how long it would last and so on. The questionnaire also h...

  7. Trips and the Life Sciences - Perspectives on Limitations to Patentability

    DEFF Research Database (Denmark)

    Wested, Jakob; Minssen, Timo

    2017-01-01

    This report is based on the material and input that was presented and discussed at the webinar with the title: “Perspectives on limitations to patentability”. The Webinar and the theme where introduced by Prof. Timo Minssen. Then Prof. Nari Lee gave a presentation introducing some of the context ...... and Minssen, Timo, Trips and the Life Sciences - Perspectives on Limitations to Patentability (June 15, 2017). Available at SSRN: https://ssrn.com/abstract=2986751...

  8. Customer satisfaction with individual shopping trip experiences in grocery retailing

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Grunert, Klaus G; Jensen, Birger Boutrup

    , whereas hedonic value reflects the potential entertainment and emotional worth associated with the shopping trip. Recognising this duality, in addition to enabling customers to satisfy utilitarian needs related to product-acquisition, grocery retailers increasingly try to offer customers pleasurable...... shopping experiences, even to entertain them. Because there is evidence suggesting even satisfied customers sometimes switch brands and retailers due to boredom, it is important for retailers to continuously engage consumers and stir interest in a given store. Satisfying customers again and again...

  9. Design and implementation of STD32-BUS based reactor protection trip unit on FPGA imbaby

    International Nuclear Information System (INIS)

    Mahmoud, I.; Elnokity, O.A.; Refai, M.K.

    2007-01-01

    This paper presents a way to design and implement the Trip Unit of a Reactor Protection System (RPS) using a Field Programmable Gate Arrays (FPGA). Instead of the traditional embedded Microprocessor based interface design method, a proposed tailor made FPGA based circuit is built to substitute the Trip Unit (TL1) existing in Egypt's 2' ' Research reactor ETRR-2. The existing embedded system is built around the STD32 field Computer Bus which used in industrial and process control applications. It is modular, rugged, reliable, and easy-to-use and is able to support a large mix of I/O cards and to easily change its configuration in the future. Therefore, the state machine of this bus is extracted from its timing diagrams and implemented in VHDL to interface the designed TU circuit. The proposed designed circuit implemented using ALTERA EPF10K10LC84-3 chip replaces the Single Board Computer which have the embedded SAY program of the TU providing the same integrated HAV and SAV functions implemented in FPGA Chip housed in an printed circuit board, which uses the same shape and specifications of STD32 boards. H/W implementation of both TU and STD32 Bus in VHDL addresses the issues of safety and reusability

  10. SnapVideo: Personalized Video Generation for a Sightseeing Trip.

    Science.gov (United States)

    Zhang, Luming; Jing, Peiguang; Su, Yuting; Zhang, Chao; Shaoz, Ling

    2017-11-01

    Leisure tourism is an indispensable activity in urban people's life. Due to the popularity of intelligent mobile devices, a large number of photos and videos are recorded during a trip. Therefore, the ability to vividly and interestingly display these media data is a useful technique. In this paper, we propose SnapVideo, a new method that intelligently converts a personal album describing of a trip into a comprehensive, aesthetically pleasing, and coherent video clip. The proposed framework contains three main components. The scenic spot identification model first personalizes the video clips based on multiple prespecified audience classes. We then search for some auxiliary related videos from YouTube 1 according to the selected photos. To comprehensively describe a scenery, the view generation module clusters the crawled video frames into a number of views. Finally, a probabilistic model is developed to fit the frames from multiple views into an aesthetically pleasing and coherent video clip, which optimally captures the semantics of a sightseeing trip. Extensive user studies demonstrated the competitiveness of our method from an aesthetic point of view. Moreover, quantitative analysis reflects that semantically important spots are well preserved in the final video clip. 1 https://www.youtube.com/.

  11. Understanding Social Learning Behaviors via a Virtual Field Trip

    Directory of Open Access Journals (Sweden)

    Xin Bai

    2014-06-01

    Full Text Available This is a multidisciplinary study investigating how a virtual rather than face-to-face field trip can be conducted in a real-world setting and how students respond to such a social learning opportunity. Our participants followed a story of a stroke patient at her virtual home and in a virtual hospital via a teaching vignette. They were then given a new case and got on a virtual trip via a multiuser virtual environment. They played the roles of patients, relatives, doctors, or nurses, experiencing the emotional, physical, or social impacts those stakeholders may go through. Our study finds the overall participation of the Virtual Group is 50% more than the Text Group. Although the Virtual Group generates much more nodes in total, they focused much less on knowledge sharing and comparing than the Text Group (46 vs. 67, but more on other higher-level aspects of social interactions, such as knowledge discovery (57 vs. 42, co-construction (66 vs. 39, testing and modification (58 vs. 24 and application of newly constructed meaning (60 vs. 16. Analysis of students’ virtual field activities and in-depth discussions of important issues implied are included to help understand social learning behaviors during a virtual field trip. Sustainability of such systems is discussed.

  12. Evaluation of Steam Generator Level behavior for Determination of Turbine Runback rate on COPs trip for Yonggwang 1 and 2 Power Uprating Units

    International Nuclear Information System (INIS)

    Lee, Kyung Jin; Hwang, Su Hyun; Yoo, Tae Geun; Chung, Soon Il; An, Byung Chang; Park, Jung Gu

    2010-01-01

    4.5% power uprate project has been progressing for the first time in Yonggwang 1 and 2(YGN1 and 2). Reviews for design change due to the power uprate were accomplished. Steam generator level behavior was one of the most important parameters because it could be cause of reactor trip or turbine trip. As the results of the reviews, YGN1 and 2 had to reassess it for change of turbine runback rate when turbine runback occurs due to the condensate operating pumps (COP) trip. This study has been carried out for evaluating the steam generator level behavior for determination of turbine runback rate on COPs trip for Yonggwang 1 and 2 Power Uprating Units. The steam generator water level evaluation program for YGN1 and 2 (SLEP-Y1) has been developed for it. The program includes models for the steam generator water level response. SLEP-Y1 is programmed with advanced continuous system simulation language (ACSL). The language has been used to simulate physical systems as a commercial tool used to evaluate system designs

  13. Mechanisms influencing student understanding on an outdoor guided field trip

    Science.gov (United States)

    Caskey, Nourah Al-Rashid

    Field trips are a basic and important, yet often overlooked part of the student experience. They provide the opportunity to integrate real world knowledge with classroom learning and student previous personal experiences. Outdoor guided field trips leave students with an increased understanding, awareness and interest and in science. However, the benefits of this experience are ambiguous at best (Falk and Balling, 1982; Falk and Dierking, 1992; Kisiel, 2006.) Students on an outdoor guided field trip to a local nature park experienced a significant increase in their understanding of the rock cycle. The changes in the pre-field trip test and the post-field trip test as well as their answers in interviews showed a profound change in the students' understanding and in their interest in the subject matter. The use of the "student's voice" (Bamberger and Tal, 2008) was the motivation for data analysis. By using the students' voice, I was able to determine the mechanisms that might influence their understanding of a subject. The central concepts emerging from the data were: the outdoor setting; the students' interest; the social interaction. From these central concepts, a conceptual model was developed. The outdoor setting allows for the freedom to explore, touch, smell and movement. This, in turn, leads to an increased interest in subject matter. As the students are exploring, they are enjoying themselves and become more open to learning. Interest leads to a desire to learn (Dewey, 1975). In addition to allowing the freedom to explore and move, the outdoor setting creates the condition for social interaction. The students talk to each other as they walk; they have in-depth discourse regarding the subject matter---with the teachers, each other and with the guides. The guides have an extremely important role in the students' learning. The more successful guides not only act as experts, but also adjust to the students' needs and act or speak accordingly. The

  14. Decision making in family medicine: randomized trial of the effects of the InfoClinique and Trip database search engines.

    Science.gov (United States)

    Labrecque, Michel; Ratté, Stéphane; Frémont, Pierre; Cauchon, Michel; Ouellet, Jérôme; Hogg, William; McGowan, Jessie; Gagnon, Marie-Pierre; Njoya, Merlin; Légaré, France

    2013-10-01

    To compare the ability of users of 2 medical search engines, InfoClinique and the Trip database, to provide correct answers to clinical questions and to explore the perceived effects of the tools on the clinical decision-making process. Randomized trial. Three family medicine units of the family medicine program of the Faculty of Medicine at Laval University in Quebec city, Que. Fifteen second-year family medicine residents. Residents generated 30 structured questions about therapy or preventive treatment (2 questions per resident) based on clinical encounters. Using an Internet platform designed for the trial, each resident answered 20 of these questions (their own 2, plus 18 of the questions formulated by other residents, selected randomly) before and after searching for information with 1 of the 2 search engines. For each question, 5 residents were randomly assigned to begin their search with InfoClinique and 5 with the Trip database. The ability of residents to provide correct answers to clinical questions using the search engines, as determined by third-party evaluation. After answering each question, participants completed a questionnaire to assess their perception of the engine's effect on the decision-making process in clinical practice. Of 300 possible pairs of answers (1 answer before and 1 after the initial search), 254 (85%) were produced by 14 residents. Of these, 132 (52%) and 122 (48%) pairs of answers concerned questions that had been assigned an initial search with InfoClinique and the Trip database, respectively. Both engines produced an important and similar absolute increase in the proportion of correct answers after searching (26% to 62% for InfoClinique, for an increase of 36%; 24% to 63% for the Trip database, for an increase of 39%; P = .68). For all 30 clinical questions, at least 1 resident produced the correct answer after searching with either search engine. The mean (SD) time of the initial search for each question was 23.5 (7

  15. Observing Trip Chain Characteristics of Round-Trip Carsharing Users in China: A Case Study Based on GPS Data in Hangzhou City

    Directory of Open Access Journals (Sweden)

    Ying Hui

    2017-06-01

    Full Text Available Carsharing as a means to provide individuals with access to automobiles to complete a personal trip has grown significantly in recent years in China. However, there are few case studies based on operational data to show the role carsharing systems play in citizens’ daily trips. In this study, vehicle GPS data of a round-trip carsharing system in Hangzhou, China was used to describe the trip chain characteristics of users. For clearer delineation of carshare usage, the car use time length of all observations chosen in the study was within 24 h or less. Through data preprocessing, a large pool (26,085 of valid behavior samples was obtained, and several trip chaining attributes were selected to describe the characteristics. The pool of observations was then classified into five clusters, with each cluster having significant differences in one or two trip chain characteristics. The cluster results reflected that different use patterns exist. By a comparative analysis with trip survey data in Hangzhou, differences in trip chain characteristics exist between carsharing and private cars, but in some cases, shared vehicles can be a substitute for private cars to satisfy motorized travel. The proposed method could facilitate companies in formulating a flexible pricing strategy and determining target customers. In addition, traffic administration agencies could have a deeper understanding of the position and function of various carsharing modes in an urban transportation system.

  16. Determination of Biology Department Students' Past Field Trip Experiences and Examination of Their Self-Efficacy Beliefs in Planning and Organising Educational Field Trips

    Science.gov (United States)

    Bozdogan, Aykut Emre

    2015-01-01

    The purpose of this study is to determine the past field trip experiences of pre-service teachers who are graduates of Faculty of Sciences, Department of Biology and who had pedagogical formation training certificate and to examine their self-efficacy beliefs in planning and organizing field trips with regard to different variables. The study was…

  17. Echoes from the Field: An Ethnographic Investigation of Outdoor Science Field Trips

    Science.gov (United States)

    Boxerman, Jonathan Zvi

    As popular as field trips are, one might think they have been well-studied. Nonetheless, field trips have not been heavily studied, and little research has mapped what actually transpires during field trips. Accordingly, to address this research gap, I asked two related research questions. The first question is a descriptive one: What happens on field trips? The second question is explanatory: What field trip events are memorable and why? I employed design research and ethnographic methodologies to study learning in naturally occurring contexts. I collaborated with middle-school science teachers to design and implement more than a dozen field trips. The field trips were nested in particular biology and earth sciences focal units. Students were tasked with making scientific observations in the field and then analyzing this data during classroom activities. Audio and video recording devices captured what happened during the field trips, classroom activities and discussions, and the interviews. I conducted comparative microanalysis of videotaped interactions. I observed dozens of events during the field trips that reverberated across time and place. I characterize the features of these events and the objects that drew interest. Then, I trace the residue across contexts. This study suggests that field trips could be more than one-off experiences and have the potential to be resources to seed and enrich learning and to augment interest in the practice of science.

  18. JAC2D: A two-dimensional finite element computer program for the nonlinear quasi-static response of solids with the conjugate gradient method

    International Nuclear Information System (INIS)

    Biffle, J.H.; Blanford, M.L.

    1994-05-01

    JAC2D is a two-dimensional finite element program designed to solve quasi-static nonlinear mechanics problems. A set of continuum equations describes the nonlinear mechanics involving large rotation and strain. A nonlinear conjugate gradient method is used to solve the equations. The method is implemented in a two-dimensional setting with various methods for accelerating convergence. Sliding interface logic is also implemented. A four-node Lagrangian uniform strain element is used with hourglass stiffness to control the zero-energy modes. This report documents the elastic and isothermal elastic/plastic material model. Other material models, documented elsewhere, are also available. The program is vectorized for efficient performance on Cray computers. Sample problems described are the bending of a thin beam, the rotation of a unit cube, and the pressurization and thermal loading of a hollow sphere

  19. JAC3D -- A three-dimensional finite element computer program for the nonlinear quasi-static response of solids with the conjugate gradient method

    International Nuclear Information System (INIS)

    Biffle, J.H.

    1993-02-01

    JAC3D is a three-dimensional finite element program designed to solve quasi-static nonlinear mechanics problems. A set of continuum equations describes the nonlinear mechanics involving large rotation and strain. A nonlinear conjugate gradient method is used to solve the equation. The method is implemented in a three-dimensional setting with various methods for accelerating convergence. Sliding interface logic is also implemented. An eight-node Lagrangian uniform strain element is used with hourglass stiffness to control the zero-energy modes. This report documents the elastic and isothermal elastic-plastic material model. Other material models, documented elsewhere, are also available. The program is vectorized for efficient performance on Cray computers. Sample problems described are the bending of a thin beam, the rotation of a unit cube, and the pressurization and thermal loading of a hollow sphere

  20. "Braingame Brian": Toward an Executive Function Training Program with Game Elements for Children with ADHD and Cognitive Control Problems.

    Science.gov (United States)

    Prins, Pier J M; Brink, Esther Ten; Dovis, Sebastiaan; Ponsioen, Albert; Geurts, Hilde M; de Vries, Marieke; van der Oord, Saskia

    2013-02-01

    In the area of childhood attention-deficit hyperactivity disorder, there is an urgent need for new, innovative, and child-focused treatments. A computerized executive functioning training with game elements aimed at enhancing self-control was developed. The first results are promising, and the next steps involve replication with larger samples, evaluating transfer of training effects to daily life, and enhancing motivation through more gaming elements.

  1. Small break LOCA analysis for RCP trip strategy for YGN 3 and 4 emergency procedure guidelines

    International Nuclear Information System (INIS)

    Suh, Jong Tae; Bae, Kyoo Hwan

    1995-01-01

    A continued operation of RCPs during a certain small break LOCA may increase unnecessary inventory loss from the RCS causing a severe core uncovery which might lead to a fuel failure. After TMI-2 accident, the CEOG developed RCP trip strategy called 'Trip-Two/Leave-Two' (T2/L2) in response to NRC requests and incorporated it in the generic EPG for CE plants. The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis determines the RCP trip setpoint and demonstrates the safe operational aspects of RCP trip strategy during a small break LOCA for YGN 3 and 4. The trip setpoint of the first two RCPs for YGN 3 and 4 is calculated to be 1775 psia in pressurizer pressure based on the limiting small break LOCA with 0.15 ft 2 break size in the hot leg. The analysis results show that YGN 3 and 4 can maintain the core coolability even if the operator fails to trip the second two RCPs or trips at worst time. Also, the YGN 3 and 4 RCP trip strategy demonstrates that both the 10 CFR 50.46 requirements on PCT and the ANSI standards 58.8 requirements on operator action time can be satisfied with enough margin. Therefore, it is concluded that the T2/L2 RCP trip strategy with a trip setpoint of 1775 psia for YGN 3 and 4 can provide improved operator guidance for the RCP operation during accidents. 11 figs., 4 tabs., 9 refs. (Author)

  2. How combined trip purposes are associated with transport choice for short distance trips. Results from a cross-sectional study in the Netherlands.

    Directory of Open Access Journals (Sweden)

    Eline Scheepers

    Full Text Available One way to increase physical activity is to stimulate a shift from car use to walking or cycling. In single-purpose trips, purpose was found to be an important predictor of transport choice. However, as far as known, no studies have been conducted to see how trips with combined purposes affect this decision. This study was designed to provide insight into associations between combined purposes and transport choice.An online questionnaire (N = 3,663 was used to collect data concerning transport choice for four primary purposes: shopping, going to public natural spaces, sports, and commuting. Per combination of primary trip purpose and transport choice, participants were asked to give examples of secondary purposes that they combine with the primary purpose. Logistic regression analyses were used to model the odds of both cycling and walking versus car use.Primary trip purposes combined with commuting, shopping, visiting private contacts or medical care were more likely to be made by car than by cycling or walking. Combinations with visiting catering facilities, trips to social infrastructure facilities, recreational outings, trips to facilities for the provision of daily requirements or private contacts during the trip were more likely to be made by walking and/or cycling than by car.Combined trip purposes were found to be associated with transport choice. When stimulating active transport focus should be on the combined-trip purposes which were more likely to be made by car, namely trips combined with commuting, other shopping, visiting private contacts or medical care.

  3. TURTLE with MAD input (Trace Unlimited Rays Through Lumped Elements) -- A computer program for simulating charged particle beam transport systems and DECAY TURTLE including decay calculations

    Energy Technology Data Exchange (ETDEWEB)

    Carey, D.C.

    1999-12-09

    TURTLE is a computer program useful for determining many characteristics of a particle beam once an initial design has been achieved, Charged particle beams are usually designed by adjusting various beam line parameters to obtain desired values of certain elements of a transfer or beam matrix. Such beam line parameters may describe certain magnetic fields and their gradients, lengths and shapes of magnets, spacings between magnetic elements, or the initial beam accepted into the system. For such purposes one typically employs a matrix multiplication and fitting program such as TRANSPORT. TURTLE is designed to be used after TRANSPORT. For convenience of the user, the input formats of the two programs have been made compatible. The use of TURTLE should be restricted to beams with small phase space. The lumped element approximation, described below, precludes the inclusion of the effect of conventional local geometric aberrations (due to large phase space) or fourth and higher order. A reading of the discussion below will indicate clearly the exact uses and limitations of the approach taken in TURTLE.

  4. TURTLE with MAD input (Trace Unlimited Rays Through Lumped Elements) -- A computer program for simulating charged particle beam transport systems and DECAY TURTLE including decay calculations

    International Nuclear Information System (INIS)

    Carey, D.C.

    1999-01-01

    TURTLE is a computer program useful for determining many characteristics of a particle beam once an initial design has been achieved, Charged particle beams are usually designed by adjusting various beam line parameters to obtain desired values of certain elements of a transfer or beam matrix. Such beam line parameters may describe certain magnetic fields and their gradients, lengths and shapes of magnets, spacings between magnetic elements, or the initial beam accepted into the system. For such purposes one typically employs a matrix multiplication and fitting program such as TRANSPORT. TURTLE is designed to be used after TRANSPORT. For convenience of the user, the input formats of the two programs have been made compatible. The use of TURTLE should be restricted to beams with small phase space. The lumped element approximation, described below, precludes the inclusion of the effect of conventional local geometric aberrations (due to large phase space) or fourth and higher order. A reading of the discussion below will indicate clearly the exact uses and limitations of the approach taken in TURTLE

  5. Geologic field-trip guide to Mount Shasta Volcano, northern California

    Science.gov (United States)

    Christiansen, Robert L.; Calvert, Andrew T.; Grove, Timothy L.

    2017-08-18

    The southern part of the Cascades Arc formed in two distinct, extended periods of activity: “High Cascades” volcanoes erupted during about the past 6 million years and were built on a wider platform of Tertiary volcanoes and shallow plutons as old as about 30 Ma, generally called the “Western Cascades.” For the most part, the Shasta segment (for example, Hildreth, 2007; segment 4 of Guffanti and Weaver, 1988) of the arc forms a distinct, fairly narrow axis of short-lived small- to moderate-sized High Cascades volcanoes that erupted lavas, mainly of basaltic-andesite or low-silica-andesite compositions. Western Cascades rocks crop out only sparsely in the Shasta segment; almost all of the following descriptions are of High Cascades features except for a few unusual localities where older, Western Cascades rocks are exposed to view along the route of the field trip.The High Cascades arc axis in this segment of the arc is mainly a relatively narrow band of either monogenetic or short-lived shield volcanoes. The belt generally averages about 15 km wide and traverses the length of the Shasta segment, roughly 100 km between about the Klamath River drainage on the north, near the Oregon-California border, and the McCloud River drainage on the south (fig. 1). Superposed across this axis are two major long-lived stratovolcanoes and the large rear-arc Medicine Lake volcano. One of the stratovolcanoes, the Rainbow Mountain volcano of about 1.5–0.8 Ma, straddles the arc near the midpoint of the Shasta segment. The other, Mount Shasta itself, which ranges from about 700 ka to 0 ka, lies distinctly west of the High Cascades axis. It is notable that Mount Shasta and Medicine Lake volcanoes, although volcanologically and petrologically quite different, span about the same range of ages and bracket the High Cascades axis on the west and east, respectively.The field trip begins near the southern end of the Shasta segment, where the Lassen Volcanic Center field trip leaves

  6. Implementing virtual field trips in the curriculum of geography students

    Science.gov (United States)

    Steegen, An; Verstraeten, Gert; Martens, Lotte

    2016-04-01

    Current online geospatial databases and tools offer many opportunities in geoscience education. On the one hand a variety of geoscientific topics and regions can be studied without traditional fieldwork, and on the other hand, field-based learning activities can be prepared or post-processed. In this research, the use of Virtual Field Trips (VFTs) in Google EarthTM is studied. In the framework of geomorphology courses, undergraduate geography students were given VFTs as developed by the lecturers or had to develop VFTs themselves, after visiting a study area. Maps, photographs, GPS-tracks, literature and other spatial information were integrated in the VFTs. The effect of VFTs on learning outcomes, on the insight in the horizontal and vertical relationships between the spatially varying topics, and motivation were measured. Results confirm that students are positive about the use of VFTs. They indicate that VFTs significantly improve their mental map of the study area, whereby horizontal relationships were strengthened. Also the additional information in some VFTs proved to have positive effects on studying and structuring the learning content. Students also appreciated to work independently with the VFTs and saw possibilities for integrating various geoscientific topics. However, there are also some constraints in working with VFTs. It was clear from the study that VFTs have to be embedded in the curriculum as students do not use or develop VFTs spontaneously. Indeed, it takes a lot of time to develop a VFT, and students also appreciate a variety in work forms. Also some technical difficulties on sufficient wireless internet access and flexible work spaces have to be encountered. Besides this, curricula developers should be aware that VFTs are an interesting tool additionally to field trips, but that they cannot replace the field trips.

  7. Effects of delayed RCP trip during SBLOCA in PWR

    International Nuclear Information System (INIS)

    Montero-Mayorga, J.; Queral, C.; Gonzalez-Cadelo, J.

    2014-01-01

    Highlights: • Review of RCP trip issue in case of SBLOCA showing adequacy of present EOPs. • Risk assessment of a SBLOCA deterministic safety analysis by means of ISA methodology. • Evaluation of the probability of damage considering uncertainties in operator actuation times. • Application of ISA methodology to probabilistic safety analysis. • Obtaining of RCP trip available time as function of break size. - Abstract: After the Three Mile Island (TMI) accident, the issue of when to trip the Reactor Coolant Pumps (RCPs) in case of a Small Break Loss of Coolant Accident (SBLOCA) became very important. Several analyses were performed during the 1980s leading to the current Emergency Operating Procedures (EOPs). However these analyses have not been reviewed taking into account that several improvements have been performed in the last thirty years with respect to two phase-flow models, thermal–hydraulics codes and safety assessment methodologies. In this sense, this work has two main objectives: First of all, an assessment of the analyses carried out by Pressurizer Water Reactor (PWR) vendors after the TMI-2 accident with a model of Almaraz Nuclear Power Plant (NPP) for TRACE code (V 5.0 patch 1). On the other hand, Integrated Safety Assessment (ISA) methodology is applied to explore this matter. Such methodology has been developed by the Spanish Nuclear Safety Council (CSN) and it is an adequate method to perform analyses in nuclear safety in which the uncertainties in operator actuation time play an important role. The main conclusions obtained from this work are that, the current EOPs are adequate to manage a SBLOCA sequence in a suitable manner and that ISA methodology is a powerful tool that provides accurate information to the analyst in order to verify the robustness of the EOPs and to perform the safety assessment of both, deterministic and probabilistic safety analysis

  8. Highly Scalable Trip Grouping for Large Scale Collective Transportation Systems

    DEFF Research Database (Denmark)

    Gidofalvi, Gyozo; Pedersen, Torben Bach; Risch, Tore

    2008-01-01

    Transportation-related problems, like road congestion, parking, and pollution, are increasing in most cities. In order to reduce traffic, recent work has proposed methods for vehicle sharing, for example for sharing cabs by grouping "closeby" cab requests and thus minimizing transportation cost...... and utilizing cab space. However, the methods published so far do not scale to large data volumes, which is necessary to facilitate large-scale collective transportation systems, e.g., ride-sharing systems for large cities. This paper presents highly scalable trip grouping algorithms, which generalize previous...

  9. Study of nuclear power plant stability. Trip criteria

    International Nuclear Information System (INIS)

    Beato Castro, D.; Iturbe Uriarte, R.; Wilhelmi Ayza, J.R.

    1993-01-01

    The influence that nuclear power plants and high voltage power systems have on each other when confronted by disturbances in the offsite network may lead, due to dynamic effects, to plant trip. It is therefore necessary to study the disturbances in the network and the effects on plant equipment by means of dynamic simulations which evaluate the unit protection system and the auxiliary services so as to obtain maximum unit availability without jeopardizing its safety. These studies can be conducted since there are models and software tools capable of simulating dynamic behaviour of the electric system, including the excitation systems and specific speed governors obtainment of valid. (author)

  10. WTO approves TRIPS amendment on importing under compulsory licensing.

    Science.gov (United States)

    Herget, Greg

    2006-04-01

    On 6 December 2005, the World Trade Organization (WTO) amended the Trade Related Aspects of Intellectual Property Rights (TRIPS) agreement to allow WTO member states to produce, under compulsory licences, lower-cost generic pharmaceutical products for export to countries that lack domestic production capacity to make such products. The amendment makes permanent the previous decision of 30 August 2003, which has not yet proven to be an effective mechanism to encourage the supply of more affordable medicines and other pharmaceutical products to countries in need.

  11. The Scope of Gene Patent Protection and the TRIPS Agreement

    DEFF Research Database (Denmark)

    Sommer, Tine

    2007-01-01

    The Scope of Gene Patent Protection and the TRIPS Agreement - An Exclusively Nondiscriminatory Approach?   Gene patenting in Europe has provoked much debate both before and since the adoption of Directive 98/44/EC on the legal protection of biotechnological inventions. Some of the major points...... of discussion have been focused on the scope of protection (e.g. purpose-bound protection) and gene patents being subject to a specific DNA regime on patent rights. The Directive can be interpreted as favouring such a solution, but so far the European Commission has decided neither to support nor reject...

  12. Activity time budget during foraging trips of emperor penguins.

    Directory of Open Access Journals (Sweden)

    Shinichi Watanabe

    Full Text Available We developed an automated method using depth and one axis of body acceleration data recorded by animal-borne data loggers to identify activities of penguins over long-term deployments. Using this technique, we evaluated the activity time budget of emperor penguins (n = 10 both in water and on sea ice during foraging trips in chick-rearing season. During the foraging trips, emperor penguins alternated dive bouts (4.8 ± 4.5 h and rest periods on sea ice (2.5 ± 2.3 h. After recorder deployment and release near the colony, the birds spent 17.9 ± 8.4% of their time traveling until they reached the ice edge. Once at the ice edge, they stayed there more than 4 hours before the first dive. After the first dive, the mean proportions of time spent on the ice and in water were 30.8 ± 7.4% and 69.2 ± 7.4%, respectively. When in the water, they spent 67.9 ± 3.1% of time making dives deeper than 5 m. Dive activity had no typical diurnal pattern for individual birds. While in the water between dives, the birds had short resting periods (1.2 ± 1.7 min and periods of swimming at depths shallower than 5 m (0.25 ± 0.38 min. When the birds were on the ice, they primarily used time for resting (90.3 ± 4.1% of time and spent only 9.7 ± 4.1% of time traveling. Thus, it appears that, during foraging trips at sea, emperor penguins traveled during dives >5 m depth, and that sea ice was primarily used for resting. Sea ice probably provides refuge from natural predators such as leopard seals. We also suggest that 24 hours of sunlight and the cycling of dive bouts with short rest periods on sea ice allow emperor penguins to dive continuously throughout the day during foraging trips to sea.

  13. Arizona Geology Trip - February 25-28, 2008

    Science.gov (United States)

    Thomas, Gretchen A.; Ross, Amy J.

    2008-01-01

    A variety of hardware developers, crew, mission planners, and headquarters personnel traveled to Gila Bend, Arizona, in February 2008 for a CxP Lunar Surface Systems Team geology experience. Participating in this field trip were the CxP Space Suit System (EC5) leads: Thomas (PLSS) and Ross (PGS), who presented the activities and findings learned from being in the field during this KC. As for the design of a new spacesuit system, this allowed the engineers to understand the demands this type of activity will have on NASA's hardware, systems, and planning efforts. The engineers also experienced the methods and tools required for lunar surface activity.

  14. A modular finite-element model (MODFE) for areal and axisymmetric ground-water-flow problems, Part 3: Design philosophy and programming details

    Science.gov (United States)

    Torak, L.J.

    1993-01-01

    A MODular Finite-Element, digital-computer program (MODFE) was developed to simulate steady or unsteady-state, two-dimensional or axisymmetric ground-water-flow. The modular structure of MODFE places the computationally independent tasks that are performed routinely by digital-computer programs simulating ground-water flow into separate subroutines, which are executed from the main program by control statements. Each subroutine consists of complete sets of computations, or modules, which are identified by comment statements, and can be modified by the user without affecting unrelated computations elsewhere in the program. Simulation capabilities can be added or modified by either adding or modifying subroutines that perform specific computational tasks, and the modular-program structure allows the user to create versions of MODFE that contain only the simulation capabilities that pertain to the ground-water problem of interest. MODFE is written in a Fortran programming language that makes it virtually device independent and compatible with desk-top personal computers and large mainframes. MODFE uses computer storage and execution time efficiently by taking advantage of symmetry and sparseness within the coefficient matrices of the finite-element equations. Parts of the matrix coefficients are computed and stored as single-subscripted variables, which are assembled into a complete coefficient just prior to solution. Computer storage is reused during simulation to decrease storage requirements. Descriptions of subroutines that execute the computational steps of the modular-program structure are given in tables that cross reference the subroutines with particular versions of MODFE. Programming details of linear and nonlinear hydrologic terms are provided. Structure diagrams for the main programs show the order in which subroutines are executed for each version and illustrate some of the linear and nonlinear versions of MODFE that are possible. Computational aspects of

  15. On line test of trip channels and actuators in primary shutdown system for RAPP-3,4/KAIGA-1,2 reactors

    International Nuclear Information System (INIS)

    Pramanik, M.; Gupta, P.K.; Ravi Prakash

    1997-01-01

    Several types of system design and logic arrangements have been used for reactor shutdown systems to avoid the possibility that a single failure within the trip channels/shutdown system actuators can prevent a shutdown system actuation. The trip channels and the logic arrangements associated with the shutdown systems use redundancy to allow them to continue to operate successfully even after having a certain number of failures. A periodic test is thus needed to detect and repair/replace failed elements to prevent accumulation and eventual system failure. The test must be capable of detecting the first failure. The design initiates shutdown system actuation by deenergising the logic relays and turning off the power to the final electrical actuators. Thus, the systems are fail safe with respect to loss of electrical power to the instruments, logic channels and the actuators. Several system/logic arrangements are used to reduce the chances of spurious actuation caused by the loss of a single power supply and other single failures. In general, the systems use coincidence of instrument channel trips and have separate power supplies for the individual instrument channel and dual power supplies where a single final control element is used. These features also permit on line test of instrument channels and logic train. On line test detects component failures not found by other means. The test determines whether gross failure has occurred rather than perform a calibration. As far as practicable the whole channel from sensors to logic and final control element is to be tested. (author)

  16. Trip time prediction in mass transit companies. A machine learning approach

    OpenAIRE

    João M. Moreira; Alípio Jorge; Jorge Freire de Sousa; Carlos Soares

    2005-01-01

    In this paper we discuss how trip time prediction can be useful foroperational optimization in mass transit companies and which machine learningtechniques can be used to improve results. Firstly, we analyze which departmentsneed trip time prediction and when. Secondly, we review related work and thirdlywe present the analysis of trip time over a particular path. We proceed by presentingexperimental results conducted on real data with the forecasting techniques wefound most adequate, and concl...

  17. Medical and pharmacy student concerns about participating on international service-learning trips

    OpenAIRE

    Chuang, Chih; Khatri, Siddique H.; Gill, Manpal S.; Trehan, Naveen; Masineni, Silpa; Chikkam, Vineela; Farah, Guillaume G.; Khan, Amber; Levine, Diane L.

    2015-01-01

    Background International Service Learning Trips (ISLT) provide health professional students the opportunity to provide healthcare, under the direction of trained faculty, to underserved populations in developing countries. Despite recent increases in international service learning trips, there is scant literature addressing concerns students have prior to attending such trips. This study focuses on identifying concerns before and after attending an ISLT and their impact on students. Methods A...

  18. Microstructure Evolution during Friction Stir Spot Welding of TRIP Steel

    DEFF Research Database (Denmark)

    Lomholt, Trine Colding; Pantleon, Karen; Somers, Marcel A. J.

    2010-01-01

    In this study, the feasibility of friction stir spot welding of TRIP steel is investigated. In addition to manufacturing successful welds, the present study aims at a fundamental understanding of the mechanisms occurring at the (sub)micron scale during friction stir spot welding. As one of the ma...... electron microscopy, and electron backscatter diffraction. Microhardness measurements and lap-shear tensile tests completed the investigations of the welded samples and allow evaluation of the quality of the welds.......In this study, the feasibility of friction stir spot welding of TRIP steel is investigated. In addition to manufacturing successful welds, the present study aims at a fundamental understanding of the mechanisms occurring at the (sub)micron scale during friction stir spot welding. As one of the main...... parameters to control friction stir welding, the influence of the rotational speed of the tool was investigated. Three different rotational speeds (500 rpm, 1000 rpm and 1500 rpm, respectively) were applied. The microstructure of the welded samples was investigated with reflected light microscopy, scanning...

  19. Effective Lesson Planning: Field Trips in the Science Curriculum

    Science.gov (United States)

    Rieger, C. R.

    2010-10-01

    Science field trips can positively impact and motivate students. However, if a field trip is not executed properly, with appropriate preparation and follow-up reinforcement, it can result in a loss of valuable educational time and promote misconceptions in the students. This study was undertaken to determine if a classroom lesson before an out-of-the-classroom activity would affect learner gain more or less than a lesson after the activity. The study was based on the immersive theater movie ``Earth's Wild Ride'' coupled with a teacher-led Power Point lesson. The participants in the study were students in a sixth grade physical science class. The order of lessons showed no detectable effect on final learner outcomes. Based on pre- and post-testing, improvement in mean learning gain came from the teacher-led lesson independent of the movie. The visit to the immersive theater, however, had significant positive effects that did not show up in the quantitative results of the testing.

  20. Pure intelligent monitoring system for steam economizer trips

    Directory of Open Access Journals (Sweden)

    Basim Ismail Firas

    2017-01-01

    Full Text Available Steam economizer represents one of the main equipment in the power plant. Some steam economizer's behavior lead to failure and shutdown in the entire power plant. This will lead to increase in operating and maintenance cost. By detecting the cause in the early stages maintain normal and safe operational conditions of power plant. However, these methodologies are hard to be achieved due to certain boundaries such as system learning ability and the weakness of the system beyond its domain of expertise. The best solution for these problems, an intelligent modeling system specialized in steam economizer trips have been proposed and coded within MATLAB environment to be as a potential solution to insure a fault detection and diagnosis system (FDD. An integrated plant data preparation framework for 10 trips was studied as framework variables. The most influential operational variables have been trained and validated by adopting Artificial Neural Network (ANN. The Extreme Learning Machine (ELM neural network methodology has been proposed as a major computational intelligent tool in the system. It is shown that ANN can be implemented for monitoring any process faults in thermal power plants. Better speed of learning algorithms by using the Extreme Learning Machine has been approved as well.

  1. Trip setpoint analysis for the reactor protection system of an advanced integral reactor

    International Nuclear Information System (INIS)

    Yang, Soo Hyung; Kim, Soo Hyung; Chung, Young Jong; Zee, Sung Quun

    2007-01-01

    The trip setpoints for the reactor protection system of a 65-MWt advanced integral reactor have been analyzed through sensitivity evaluations by using the Transients and Setpoint Simulation/System-integrated Modular Reactor code. In the analysis, an inadvertent control rod withdrawal event has been considered as an initiating event because this event results in the worst consequences from the viewpoint of the minimum critical heat flux ratio and its consequences are considerably affected by the trip setpoints. Sensitivity evaluations have been performed by changing the trip setpoints for the ceiling of a variable overpower trip (VOPT) function and the pressure of a high pressurizer pressure trip function. Analysis results show that a VOPT function is an effective means to satisfy the acceptance criteria as the control rod rapidly withdraws: on the other hand, a high pressurizer pressure trip function is an essential measure to preserve the safety margin in the case of a slow withdrawal of the control rod because a reactor trip by a VOPT function does not occur in this case. It is also shown that the adoptions of 122.2% of the rated core power and 16.25 MPa as the trip setpoint for the ceiling of a VOPT function and the pressure of a high pressurizer pressure trip function are good selections to satisfy the acceptance criteria

  2. A Novel Trip Coverage Index for Transit Accessibility Assessment Using Mobile Phone Data

    Directory of Open Access Journals (Sweden)

    Zhengyi Cai

    2017-01-01

    Full Text Available Transit accessibility is an important measure on the service performance of transit systems. To assess whether the public transit service is well accessible for trips of specific origins, destinations, and origin-destination (OD pairs, a novel measure, the Trip Coverage Index (TCI, is proposed in this paper. TCI considers both the transit trip coverage and spatial distribution of individual travel demands. Massive trips between cellular base stations are estimated by using over four-million mobile phone users. An easy-to-implement method is also developed to extract the transit information and driving routes for millions of requests. Then the trip coverage of each OD pair is calculated. For demonstrative purposes, TCI is applied to the transit network of Hangzhou, China. The results show that TCI represents the better transit trip coverage and provides a more powerful assessment tool of transit quality of service. Since the calculation is based on trips of all modes, but not only the transit trips, TCI offers an overall accessibility for the transit system performance. It enables decision makers to assess transit accessibility in a finer-grained manner on the individual trip level and can be well transformed to measure transit services of other cities.

  3. Teachers as Secondary Players: Involvement in Field Trips to Natural Environments

    Science.gov (United States)

    Alon, Nirit Lavie; Tal, Tali

    2017-08-01

    This study focused on field trips to natural environments where the teacher plays a secondary role alongside a professional guide. We investigated teachers' and field trip guides' views of the teacher's role, the teacher's actual function on the field trip, and the relationship between them. We observed field trips, interviewed teachers and guides, and administered questionnaires. We found different levels of teacher involvement, ranging from mainly supervising and giving technical help, to high involvement especially in the cognitive domain and sometimes in the social domain. Analysis of students' self-reported outcomes showed that the more students believe their teachers are involved, the higher the self-reported learning outcomes.

  4. Small break LOCA analysis for YGN 5 and 6 RCP trip strategy in power mode operation

    International Nuclear Information System (INIS)

    Kim, Tech Mo; Choi, Han Rim

    2001-01-01

    A continued operation of Reactor Coolant Pumps(RCPs) during a Small Break Loss of Coolant Accident(SBLOCA) in all operation mode may increase unnecessary inventory loss from the Reactor Coolant System(RCS) causing a severe core uncovery which might lead to fuel failure. After Three Mile Island Unit 2(TMI-2) accident, the Combustion Engineering Owner Group(CEOG) developed RCP trip strategy called 'Trip-Two/Leave-Two' (T2/L2). The T2/L2 RCP trip strategy consists of tripping the first two RCPs on low RCS pressure and then tripping the remaining two RCPs if a LOCA has occurred. This analysis demonstrates the inherent safety of RCP trip strategy during an SBLOCA for Youggwang Nuclear Power Plant Unit 5 and 6(YGN 5 and 6). The trip setpoint of the first two RCPs for YGN 5 and 6 is calculated to be 1721 psia in pressurizer pressure based on the limiting SBLOCA with 0.15 ft 2 break size in the hot leg. The analysis results show that YGN 5 and 6 can maintain the core coolability even if the operator fails to trip the second two RCPs or trips at the worst time of minimum liquid inventory

  5. COBRA - 3C/KFKI: a digital computer program for steady and transient thermal-hydraulic analysis of rod bundle nuclear fuel elements

    International Nuclear Information System (INIS)

    Vigassy, J.; Kovacs, L.M.

    1977-11-01

    COBRA-3C/KFKI is a digital computer program for the CDC-3300 computer in FORTRAN language. The program is a revised version of the original COBRA-3C code. The code calculates steady-state and transient flow and enthalpy transport in rod-bundle nuclear fuel elements in both boiling and nonboiling conditions. The mathematical model is formulated by dividing the bundle flow area into flow subchannels that are assumed to contain one-dimensional flow and are coupled to each other by turbulent and diversion crossflow mixing. The program neglects sonic velocity propagation but allows for a temporal and spatial acceleration of the diversion crossflow in the transverse momentum equation. A semiexplicit finite-difference scheme is used to perform a boundary-value solution where the boundary conditions are the inlet enthalpy, inlet flow rate and exit pressure. (D.P.)

  6. "Braingame Brian": Toward an Executive Function Training Program with Game Elements for Children with ADHD and Cognitive Control Problems

    NARCIS (Netherlands)

    Prins, P.J.M.; ten Brink, E.; Dovis, S.; Ponsioen, A.; Geurts, H.M.; de Vries, M.; van der Oord, S.

    2013-01-01

    In the area of childhood attention-deficit hyperactivity disorder, there is an urgent need for new, innovative, and child-focused treatments. A computerized executive functioning training with game elements aimed at enhancing self-control was developed. The first results are promising, and the next

  7. USAWC (United States Army War College) Military Studies Program. Training, Motivation and Intrinsic Task Value. Essential Elements of Excellence (Readiness).

    Science.gov (United States)

    1984-06-04

    Operator and the Corporate Field Service Representative for franchisee restaurant students and the Area Supervisor for company restaurant students. Full-time...reinforcement too is considered to operate through the thought process. Rather than being considered as a direct response strengthener, as many theorists hold...systematically manage their total environment to permit social learning theory to operate in practice. No element of the process is left to chance

  8. Three dimensional stress analysis of nozzle-to-shell intersections by the finite element method and a auto-mesh generation program

    International Nuclear Information System (INIS)

    Fujihara, Hirohiko; Ueda, Masahiro

    1975-01-01

    In the design of chemical reactors or nuclear pressure vessels it is often important to evaluate the stress distribution in nozzle-to-shell intersections. The finite element method is a powerful tool for stress analysis, but it has a defects to require troublesome work in preparing input data. Specially, the mesh data of oblique nozzles and tangential nozzles, in which stress concentration is very high, are very difficult to be prepared. The authors made a mesh generation program which can be used to any nozzle-to-shell intersections, and combining this program with a three dimensional stress analysis program by the finite element method they made the stress analysis of nozzle-to-shell intersections under internal pressure. Consequently, stresses, strains and deformations of nozzles nonsymmetrical to spherical shells and nozzles tangential to cylindrical shells were made clear and it was shown that the curvature of the inner surface of the nozzle corner was a controlling factor in reducing stress concentration. (auth.)

  9. Aeroheating Measurement of Apollo Shaped Capsule with Boundary Layer Trip in the Free-piston Shock Tunnel HIEST

    Science.gov (United States)

    Hideyuki, TANNO; Tomoyuki, KOMURO; Kazuo, SATO; Katsuhiro, ITOH; Lillard, Randolph P.; Olejniczak, Joseph

    2013-01-01

    An aeroheating measurement test campaign of an Apollo capsule model with laminar and turbulent boundary layer was performed in the free-piston shock tunnel HIEST at JAXA Kakuda Space Center. A 250mm-diameter 6.4%-scaled Apollo CM capsule model made of SUS-304 stainless steel was applied in this study. To measure heat flux distribution, the model was equipped with 88 miniature co-axial Chromel-Constantan thermocouples on the heat shield surface of the model. In order to promote boundary layer transition, a boundary layer trip insert with 13 "pizza-box" isolated roughness elements, which have 1.27mm square, were placed at 17mm below of the model geometric center. Three boundary layer trip inserts with roughness height of k=0.3mm, 0.6mm and 0.8mm were used to identify the appropriate height to induce transition. Heat flux records with or without roughness elements were obtained for model angles of attack 28º under stagnation enthalpy between H(sub 0)=3.5MJ/kg to 21MJ/kg and stagnation pressure between P(sub 0)=14MPa to 60MPa. Under the condition above, Reynolds number based on the model diameter was varied from 0.2 to 1.3 million. With roughness elements, boundary layer became fully turbulent less than H(sub 0)=9MJ/kg condition. However, boundary layer was still laminar over H(sub 0)=13MJ/kg condition even with the highest roughness elements. An additional experiment was also performed to correct unexpected heat flux augmentation observed over H(sub 0)=9MJ/kg condition.

  10. FRESCO-II: A computer program for analysis of fission product release from spherical HTGR-fuel elements in irradiation and annealing experiments

    International Nuclear Information System (INIS)

    Krohn, H.; Finken, R.

    1983-06-01

    The modular computer code FRESCO has been developed to describe the mechanism of fission product release from a HTGR-Core under accident conditions. By changing some program modules it has been extended to take into account the transport phenomena (i.e. recoil) too, which only occur under reactor operating conditions and during the irradiation experiments. For this report, the release of cesium and strontium from three HTGR-fuel elements has been evaluated and compared with the experimental data. The results show that the measured release can be described by the considered models. (orig.) [de

  11. Vehicle Routing Problem with Backhaul, Multiple Trips and Time Window

    Directory of Open Access Journals (Sweden)

    Johan Oscar Ong

    2011-01-01

    Full Text Available Transportation planning is one of the important components to increase efficiency and effectiveness in the supply chain system. Good planning will give a saving in total cost of the supply chain. This paper develops the new VRP variants’, VRP with backhauls, multiple trips, and time window (VRPBMTTW along with its problem solving techniques by using Ant Colony Optimization (ACO and Sequential Insertion as initial solution algorithm. ACO is modified by adding the decoding process in order to determine the number of vehicles, total duration time, and range of duration time regardless of checking capacity constraint and time window. This algorithm is tested by using set of random data and verified as well as analyzed its parameter changing’s. The computational results for hypothetical data with 50% backhaul and mix time windows are reported.

  12. Failure mode and effects analysis on typical reactor trip system

    International Nuclear Information System (INIS)

    Eisawy, E.A.

    2010-01-01

    An updated failure mode and effects analysis, FMEA , has been performed on a typical reactor trip system. This upgrade helps to avoid system damage and ,as a result, extends the system service life. It also provides for simplified maintenance and surveillance testing. The operating conditions under which the system is to carry out its function and the operational profile expected for the system have been determined. The results of the FMEA have been given in terms of operating states of the subsystem.The results are given in form of table which is set up such that for a given failure one can read across it and determine which items remain operating in the system. From this data one can identify the number of components operating in the system for monitors pressure exceeds the setpoint pressure.

  13. ANO-2 turbine trip transient test analysis using MMS

    International Nuclear Information System (INIS)

    Jain, P.K.; Divakaruni, S.M.

    1984-01-01

    The data from the turbine trip transient tests conducted at the Arkansas Nuclear One-Unit 2 was used as one of the benchmark cases for validating the Modular Modeling System (MMS) Code, developed by the Electric Power Research Institute (EPRI). The data was used first to validate the modules in stand-alone simulation tests and then in a Nuclear Steam Supply system integral tests. This paper presents the results from the MMS simulation effort and compares the code generated results with the plant data as well as RETRAN results. In general, MMS simulation results compare very well with the plant data. The code calculations for the hot and cold leg temperatures, primary system pressure and the pressurizer level are very good compared to RETRAN; however, MMS results for steam generator level compare reasonably well only with RETRAN calculations

  14. Phantom inflation and the 'Big Trip'

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Diaz, Pedro F. [Colina de los Chopos, Instituto de Matematicas y Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 121, 28006 Madrid (Spain)]. E-mail: p.gonzalezdiaz@imaff.cfmac.csic.es; Jimenez-Madrid, Jose A. [Colina de los Chopos, Instituto de Matematicas y Fisica Fundamental, Consejo Superior de Investigaciones Cientificas, Serrano 121, 28006 Madrid (Spain)

    2004-08-19

    Primordial inflation is regarded to be driven by a phantom field which is here implemented as a scalar field satisfying an equation of state p={omega}{rho}, with {omega}-1. Being even aggravated by the weird properties of phantom energy, this will pose a serious problem with the exit from the inflationary phase. We argue, however, in favor of the speculation that a smooth exit from the phantom inflationary phase can still be tentatively recovered by considering a multiverse scenario where the primordial phantom universe would travel in time toward a future universe filled with usual radiation, before reaching the big rip. We call this transition the 'Big Trip' and assume it to take place with the help of some form of anthropic principle which chooses our current universe as being the final destination of the time transition.

  15. Analysis of the ANO-2 turbine trip test

    International Nuclear Information System (INIS)

    McDonald, T.A.; Tessier, J.H.; Senda, Y.; Waterman, M.D.

    1983-01-01

    The start-up tests performed with the Arkansas Nuclear One-Unit Two (ANO-2) plant provided an opportunity for studying the validity of certain integral systems codes. In particular, the turbine trip from 98.2 percent full power test was investigated with the RELAP5/MOD1 (cycle 18) ode. A detailed plant model was developed and used to understand the test reports. The early depressurization portion of the transient was reproduced; however, the resultant repressurization was not well represented due to uncertainty in the data and plant response. As a result of these computations and detailed analyses of the test data considerable insight was drawn as to the best way to perform and gather data from such integral systems tests for use in code verification studies

  16. Applying Game Thinking to Slips, Trips and Falls Prevention.

    Science.gov (United States)

    Dewick, Paul; Stanmore, Emma

    2017-01-01

    Gamification is about the way in which 'game thinking' can engage participants and change behaviours in real, non-game contexts. This paper explores how game thinking can be applied to help prevent slips, trips and falls (STF), which are the largest cause of accidental death in older people across Europe. The paper contributes to the assistive technology, digital health and computer science/human behaviour communities by responding to a gap in the literature for papers detailing the innovation process of developing interventions to improve health and quality of life. The aim of the paper is of interest to the many stakeholders involved in enabling older people to live independent, confident, healthy and safe lives in the community.

  17. Microprocessor tester for the treat upgrade reactor trip system

    International Nuclear Information System (INIS)

    Lenkszus, F.R.; Bucher, R.G.

    1984-01-01

    The upgrading of the Transient Reactor Test (TREAT) Facility at ANL-Idaho has been designed to provide additional experimental capabilities for the study of core disruptive accident (CDA) phenomena. In addition, a programmable Automated Reactor Control System (ARCS) will permit high-power transients up to 11,000 MW having a controlled reactor period of from 15 to 0.1 sec. These modifications to the core neutronics will improve simulation of LMFBR accident conditions. Finally, a sophisticated, multiply-redundant safety system, the Reactor Trip System (RTS), will provide safe operation for both steady state and transient production operating modes. To insure that this complex safety system is functioning properly, a Dedicated Microprocessor Tester (DMT) has been implemented to perform a thorough checkout of the RTS prior to all TREAT operations

  18. Development of INSTEC(INformation System of Trip Event Cases)

    International Nuclear Information System (INIS)

    Lee, Jeong Woon; Shim, Bong Sik; Park, Keun Oak; Cheon, Se Woo

    1996-09-01

    In this research, we established an incident analysis procedure based on the concept of interaction between plant components and developed INSTEC(INformation System of Trip Event Cases) which can manage data obtained as the result of incident analysis. The analysis procedure is consisted of the following steps; reconfiguration of incident context, identification of the paths and contents of the interaction between plant components, identification of unit event obstructing normal plant operation, identification of possible erroneous actions, decision of error modes, identification of likely causes, summarization of analysis results. INSTEC was developed to effectively present the result of incident analysis. This system offers the analyzed information such as analysis results of human error cases, operating issues and problems, recommendations to prevent a similar incident, etc. 24 tabs., 18 figs., 10 refs. (Author)

  19. How travellers’ schedule their trips under uncertain travel times

    DEFF Research Database (Denmark)

    Hjorth, Katrine

    Travel times play an important role when people decide where, when and how much to travel. But travel times are not always predictable from the traveller’s point of view: They may vary from day to day due to demand fluctuations, weather conditions, accidents and other unforeseen events that cause...... road capacity to decrease. We refer to this uncertainty as travel time variability (TTV). TTV is likely to affect how travellers schedule their trips, since it affects their probability of arriving late at their destination. We would like to account for TTV in traffic models and cost-benefit analyses......, but in practice there are limits to the kinds of behaviour that can be accommodated in such applications. For that reason, we are not solely interested in explaining travellers’ behaviour, but also in whether this behaviour can be approximated by behavioural models that are simple enough to be applied in traffic...

  20. Pig herd monitoring and undesirable tripping and stepping prevention

    DEFF Research Database (Denmark)

    Gronskyte, Ruta; Clemmensen, Line Katrine Harder; Hviid, Marchen Sonja

    2015-01-01

    Humane handling and slaughter of livestock are of major concern in modern societies. Monitoring animal wellbeing in slaughterhouses is critical in preventing unnecessary stress and physical damage to livestock, which can also affect the meat quality. The goal of this study is to monitor pig herds...... at the slaughterhouse and identify undesirable events such as pigs tripping or stepping on each other. In this paper, we monitor pig behavior in color videos recorded during unloading from transportation trucks. We monitor the movement of a pig herd where the pigs enter and leave a surveyed area. The method is based...... on optical flow, which is not well explored for monitoring all types of animals, but is the method of choice for human crowd monitoring. We recommend using modified angular histograms to summarize the optical flow vectors. We show that the classification rate based on support vector machines is 93% of all...

  1. Geologic field-trip guide to Long Valley Caldera, California

    Science.gov (United States)

    Hildreth, Wes; Fierstein, Judy

    2017-07-26

    This guide to the geology of Long Valley Caldera is presented in four parts: (1) An overview of the volcanic geology; (2) a chronological summary of the principal geologic events; (3) a road log with directions and descriptions for 38 field-trip stops; and (4) a summary of the geophysical unrest since 1978 and discussion of its causes. The sequence of stops is arranged as a four-day excursion for the quadrennial General Assembly of the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI), centered in Portland, Oregon, in August 2017. Most stops, however, are written freestanding, with directions that allow each one to be visited independently, in any order selected.

  2. The AAA+ ATPase TRIP13 remodels HORMA domains through N-terminal engagement and unfolding

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Qiaozhen; Kim, Dong Hyun; Dereli, Ihsan; Rosenberg, Scott C.; Hagemann, Goetz; Herzog, Franz; Tóth, Attila; Cleveland, Don W.; Corbett, Kevin D.

    2017-06-28

    Proteins of the conserved HORMA domain family, including the spindle assembly checkpoint protein MAD2 and the meiotic HORMADs, assemble into signaling complexes by binding short peptides termed “closure motifs”. The AAA+ ATPase TRIP13 regulates both MAD2 and meiotic HORMADs by disassembling these HORMA domain–closure motif complexes, but its mechanisms of substrate recognition and remodeling are unknown. Here, we combine X-ray crystallography and crosslinking mass spectrometry to outline how TRIP13 recognizes MAD2 with the help of the adapter protein p31comet. We show that p31comet binding to the TRIP13 N-terminal domain positions the disordered MAD2 N-terminus for engagement by the TRIP13 “pore loops”, which then unfold MAD2 in the presence of ATP. N-terminal truncation of MAD2 renders it refractory to TRIP13 action in vitro, and in cells causes spindle assembly checkpoint defects consistent with loss of TRIP13 function. Similar truncation of HORMAD1 in mouse spermatocytes compromises its TRIP13-mediated removal from meiotic chromosomes, highlighting a conserved mechanism for recognition and disassembly of HORMA domain–closure motif complexes by TRIP13.

  3. A Day at the Museum: The Impact of Field Trips on Middle School Science Achievement

    Science.gov (United States)

    Whitesell, Emilyn Ruble

    2016-01-01

    Field trips are an important feature of the United States' education system, although in the current context of high-stakes tests and school accountability, many schools are shifting resources away from enrichment. It is critical to understand how field trips and other informal learning experiences contribute to student test scores, but little…

  4. A Review of Research on School Field Trips and Their Value in Education

    Science.gov (United States)

    Behrendt, Marc; Franklin, Teresa

    2014-01-01

    The purpose of this paper is to examine the importance of science field trips as educational tools to connect students to classroom concepts. Experiential learning at formal and informal field trip venues increases student interest, knowledge, and motivation. The teacher's role in preplanning, implementation, and reflection often dictates the…

  5. Forest Field Trips among High School Science Teachers in the Southern Piedmont

    Science.gov (United States)

    McCabe, Shannon M.; Munsell, John F.; Seiler, John R.

    2014-01-01

    Students benefit in many ways by taking field trips to forests. Improved academic performance, increased participation in outdoor recreation, and a better grasp of natural resources management are some of the advantages. However, trips are not easy for teachers to organize and lead. Declining budgets, on-campus schedules, and standards of learning…

  6. 75 FR 59154 - Fisheries of the Northeastern United States; Northeast Multispecies Fishery; Trip Limit...

    Science.gov (United States)

    2010-09-27

    ... (453.6 kg) per trip, Georges Bank (GB) yellowtail flounder to 100 lb (45.4 kg) per trip, and white hake... the U.S./Canada Management Area to include the entire Western U.S./Canada Area; and authorizes the use of the rope separator trawl in the Western U.S./Canada Area for NE multispecies vessels fishing in...

  7. Anything Can Happen out There: A Holistic Approach to Field Trips

    Science.gov (United States)

    Plutino, Alessia

    2016-01-01

    This paper looks back at an academic-led language field trip project, now in its third year, involving ab-initio students of Italian at the University of Southampton. It considers the role of academic-led field trips in Modern Languages (ML) and it explores the underlying pedagogical approaches that were adopted to enhance students' engagement,…

  8. 50 CFR 660.332 - Open access daily trip limit (DTL) fishery for sablefish.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Open access daily trip limit (DTL) fishery... COAST STATES West Coast Groundfish-Open Access Fisheries § 660.332 Open access daily trip limit (DTL) fishery for sablefish. (a) Open access DTL fisheries both north and south of 36° N. lat. Open access...

  9. Pedagogical Souvenirs: An Art Educator's Reflections on Field Trips as Professional Development

    Science.gov (United States)

    Kushins, Jodi

    2015-01-01

    This essay explores the nature and importance of field trips as sites for artistic development, intellectual fulfillment, and pedagogical inspiration. The author weaves personal reflections from a professional field trip and experience teaching art education online with creative and pedagogical references to make a case for experiential learning…

  10. Taking the Student to the World: Teaching Sensitive Issues Using Field Trips

    Science.gov (United States)

    Short, Fay; Lloyd, Tracey

    2017-01-01

    Field trips can provide an opportunity to take the student to the world, as an alternative to presenting the world to the student in the classroom. Such trips can create a forum for exploring controversial and distressing topics by exposing the students to first-hand experience, rather than second-hand accounts: witnessing the effects of blind…

  11. PECITIS-II, a computer program to predict the performance of collapsible clad UO2 fuel elements

    International Nuclear Information System (INIS)

    Anand, A.K.; Anantharaman, K.; Sarda, V.

    1978-01-01

    The Indian power programme envisages the use of PHWRs, which use collapsible clad UO 2 fuel elements. A computer code, PECITIS-II, developed for the analysis of this type of fuel is described in detail. The sheath strain and fission gas pressure are evaluated by this method. The pellet clad gap conductance is calculated by Ross and Solute model. The pellet thermal expansion is calculated by assuming a two zone model, i.e. a plastic core surrounded by an elastic cracked annulus. (author)

  12. The remediation process: Approach and elements of the Department of Energy's environmental restoration program in a Superfund environment

    International Nuclear Information System (INIS)

    Lehr, J.C.

    1993-01-01

    The Department of Energy (DOE) operates a large industrial complex located at various production, processing, testing, and research and development installations across the country. During the 40+ years of operation, this complex generated and managed waste to then-current standards. However, some of these waste management practices have subsequently been proven to be inadequate for long-term environmental protection. The Office of Environmental Restoration and Waste Management (EM) was established in 1989, when DOE's top priority changed from nuclear weapons production to environmental cleanup. The Environmental Restoration (ER) Program within EM was tasked to ensure that risks to human health and the environment posed by DOE's past operations at its nuclear facilities and sites are eliminated or reduced to prescribed, safe levels. Since its creation, the ER Program has been one of the fastest growing programs in the Department, demonstrating the Secretary's commitment to the new clean-up priority. (The 1989 budget was $400 million, while the 1993 budget is $1.8 billion.) As new technologies are developed and new management strategies implemented, the program will continue to expand. This paper describes the environmental remediation process from its early assessment phase to the final compliance effort

  13. An integrative conceptual framework for analyzing customer satisfaction with shopping trip experiences in grocery retailing

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Jensen, Birger Boutrup; Bech-Larsen, Tino

    2012-01-01

    Grocery retailers aim to satisfy customers, and because grocery shopping trips are frequently recurring, they must do socontinuously. Surprisingly, little research has addressed satisfaction with individual grocery shopping trips. This article therefore develops a conceptual framework for analyzing...... customer satisfaction with individual grocery shopping trip experiences within a overall ‘disconfirmation of expectations model’ of customer satisfaction. The contribution of the framework is twofold. First, by focusing on satisfaction with individual grocery shopping trips, previous research...... on satisfaction in the retailing literature. Second, the framework synthesizes and integrates multiple central concepts from different research streams into a common framework for analyzing shopping trip satisfaction. Propositions are derived regarding the relationships among the different concepts...

  14. CONVEC: a computer program for transient incompressible fluid flow based on quadratic finite elements. Part 1: theoretical aspects

    International Nuclear Information System (INIS)

    Laval, H.

    1981-01-01

    This report describes the theoretical and numerical aspects of the finite element computer code CONVEC designed for the transient analysis of two-dimensional plane or three-dimensional axisymmetric incompressible flows including the effects of heat transfer. The governing equations for the above class of problems are the time-dependent incompressible Navier-Stokes equations and the thermal energy equation. The general class of flow problems analysed by CONVEC is discussed and the equations for the initial-boundary value problem are represented. A brief description of the finite element method and the weighted residual formulation is presented. The numerical solution of the incompressible equations is achieved by using a fractional step method. The mass lumping process associated with an explicit time integration scheme is described. The time integration is analysed and the stability conditions are derived. Numerical applications are presented. Standard problems of natural and forced convection are solved and the solutions obtained are compared with other numerical solutions published in the literature

  15. Providing Feedback, Orientation and Opportunities for Reflection as Key Elements for Successful Mentoring Programs: Reviewing a Program for Future Business Education Teachers

    Science.gov (United States)

    Riebenbauer, Elisabeth; Dreisiebner, Gernot; Stock, Michaela

    2017-01-01

    The introduction to teaching is critical for novice teachers. Near the end of their master's program, students of Business Education and Development in Austria spend one semester at an assigned school. They are introduced to teaching, while being assisted by peer students, mentoring teachers, and a companion course. Mentors receive special…

  16. Petrographic description of calcite/opal samples collected on field trip of December 5-9, 1992. Special report No. 7

    International Nuclear Information System (INIS)

    Hill, C.A.; Schluter, C.M.

    1993-06-01

    This study is part of the research program of the Yucca Mountain Project intended to provide the State of Nevada with a detailed analysis and assessment of the water-deposited minerals of Yucca Mountain and adjacent regions. Forty-three separate stops were made and 203 samples were collected during the five days of the field trip. This report describes petrographic observations made on the calcite/opal samples

  17. Optimal Recycling of Steel Scrap and Alloying Elements: Input-Output based Linear Programming Method with Its Application to End-of-Life Vehicles in Japan.

    Science.gov (United States)

    Ohno, Hajime; Matsubae, Kazuyo; Nakajima, Kenichi; Kondo, Yasushi; Nakamura, Shinichiro; Fukushima, Yasuhiro; Nagasaka, Tetsuya

    2017-11-21

    Importance of end-of-life vehicles (ELVs) as an urban mine is expected to grow, as more people in developing countries are experiencing increased standards of living, while the automobiles are increasingly made using high-quality materials to meet stricter environmental and safety requirements. While most materials in ELVs, particularly steel, have been recycled at high rates, quality issues have not been adequately addressed due to the complex use of automobile materials, leading to considerable losses of valuable alloying elements. This study highlights the maximal potential of quality-oriented recycling of ELV steel, by exploring the utilization methods of scrap, sorted by parts, to produce electric-arc-furnace-based crude alloy steel with minimal losses of alloying elements. Using linear programming on the case of Japanese economy in 2005, we found that adoption of parts-based scrap sorting could result in the recovery of around 94-98% of the alloying elements occurring in parts scrap (manganese, chromium, nickel, and molybdenum), which may replace 10% of the virgin sources in electric arc furnace-based crude alloy steel production.

  18. VIBA-Lab 3.0: Computer program for simulation and semi-quantitative analysis of PIXE and RBS spectra and 2D elemental maps

    Energy Technology Data Exchange (ETDEWEB)

    Orlić, Ivica; Mekterović, Darko [Department of Physics, University of Rijeka, Radmile Matejčić 2, 51000 Rijeka (Croatia); Mekterović, Igor [Faculty of Electrical Engineering and Computing, University of Zagreb (Croatia); Ivošević, Tatjana [Faculty of Engineering, University of Rijeka, Vukovarska 58, HR-51000 Rijeka (Croatia)

    2015-11-15

    VIBA-Lab is a computer program originally developed by the author and co-workers at the National University of Singapore (NUS) as an interactive software package for simulation of Particle Induced X-ray Emission and Rutherford Backscattering Spectra. The original program is redeveloped to a VIBA-Lab 3.0 in which the user can perform semi-quantitative analysis by comparing simulated and measured spectra as well as simulate 2D elemental maps for a given 3D sample composition. The latest version has a new and more versatile user interface. It also has the latest data set of fundamental parameters such as Coster–Kronig transition rates, fluorescence yields, mass absorption coefficients and ionization cross sections for K and L lines in a wider energy range than the original program. Our short-term plan is to introduce routine for quantitative analysis for multiple PIXE and XRF excitations. VIBA-Lab is an excellent teaching tool for students and researchers in using PIXE and RBS techniques. At the same time the program helps when planning an experiment and when optimizing experimental parameters such as incident ions, their energy, detector specifications, filters, geometry, etc. By “running” a virtual experiment the user can test various scenarios until the optimal PIXE and BS spectra are obtained and in this way save a lot of expensive machine time.

  19. VIBA-Lab 3.0: Computer program for simulation and semi-quantitative analysis of PIXE and RBS spectra and 2D elemental maps

    International Nuclear Information System (INIS)

    Orlić, Ivica; Mekterović, Darko; Mekterović, Igor; Ivošević, Tatjana

    2015-01-01

    VIBA-Lab is a computer program originally developed by the author and co-workers at the National University of Singapore (NUS) as an interactive software package for simulation of Particle Induced X-ray Emission and Rutherford Backscattering Spectra. The original program is redeveloped to a VIBA-Lab 3.0 in which the user can perform semi-quantitative analysis by comparing simulated and measured spectra as well as simulate 2D elemental maps for a given 3D sample composition. The latest version has a new and more versatile user interface. It also has the latest data set of fundamental parameters such as Coster–Kronig transition rates, fluorescence yields, mass absorption coefficients and ionization cross sections for K and L lines in a wider energy range than the original program. Our short-term plan is to introduce routine for quantitative analysis for multiple PIXE and XRF excitations. VIBA-Lab is an excellent teaching tool for students and researchers in using PIXE and RBS techniques. At the same time the program helps when planning an experiment and when optimizing experimental parameters such as incident ions, their energy, detector specifications, filters, geometry, etc. By “running” a virtual experiment the user can test various scenarios until the optimal PIXE and BS spectra are obtained and in this way save a lot of expensive machine time.

  20. VIBA-Lab 3.0: Computer program for simulation and semi-quantitative analysis of PIXE and RBS spectra and 2D elemental maps

    Science.gov (United States)

    Orlić, Ivica; Mekterović, Darko; Mekterović, Igor; Ivošević, Tatjana

    2015-11-01

    VIBA-Lab is a computer program originally developed by the author and co-workers at the National University of Singapore (NUS) as an interactive software package for simulation of Particle Induced X-ray Emission and Rutherford Backscattering Spectra. The original program is redeveloped to a VIBA-Lab 3.0 in which the user can perform semi-quantitative analysis by comparing simulated and measured spectra as well as simulate 2D elemental maps for a given 3D sample composition. The latest version has a new and more versatile user interface. It also has the latest data set of fundamental parameters such as Coster-Kronig transition rates, fluorescence yields, mass absorption coefficients and ionization cross sections for K and L lines in a wider energy range than the original program. Our short-term plan is to introduce routine for quantitative analysis for multiple PIXE and XRF excitations. VIBA-Lab is an excellent teaching tool for students and researchers in using PIXE and RBS techniques. At the same time the program helps when planning an experiment and when optimizing experimental parameters such as incident ions, their energy, detector specifications, filters, geometry, etc. By "running" a virtual experiment the user can test various scenarios until the optimal PIXE and BS spectra are obtained and in this way save a lot of expensive machine time.

  1. Impacts of energy consumption and emissions on the trip cost without late arrival at the equilibrium state

    Science.gov (United States)

    Tang, Tie-Qiao; Wang, Tao; Chen, Liang; Shang, Hua-Yan

    2017-08-01

    In this paper, we apply a car-following model, fuel consumption model, emission model and electricity consumption model to explore the influences of energy consumption and emissions on each commuter's trip costs without late arrival at the equilibrium state. The numerical results show that the energy consumption and emissions have significant impacts on each commuter's trip cost without late arrival at the equilibrium state. The fuel cost and emission cost prominently enhance each commuter's trip cost and the trip cost increases with the number of vehicles, which shows that considering the fuel cost and emission cost in the trip cost will destroy the equilibrium state. However, the electricity cost slightly enhances each commuter's trip cost, but the trip cost is still approximately a constant, which indicates that considering the electricity cost in the trip cost does not destroy the equilibrium state.

  2. ARDISC (Argonne Dispersion Code): computer programs to calculate the distribution of trace element migration in partially equilibrating media

    International Nuclear Information System (INIS)

    Strickert, R.; Friedman, A.M.; Fried, S.

    1979-04-01

    A computer program (ARDISC, the Argonne Dispersion Code) is described which simulates the migration of nuclides in porous media and includes first order kinetic effects on the retention constants. The code allows for different absorption and desorption rates and solves the coupled migration equations by arithmetic reiterations. Input data needed are the absorption and desorption rates, equilibrium surface absorption coefficients, flow rates and volumes, and media porosities

  3. Snake River sockeye salmon captive broodstock program hatchery element, Annual Progress Report: January 1, 1998 - December 31, 1998

    International Nuclear Information System (INIS)

    Kline A, Paul; Heindel A, Jeff

    1999-01-01

    On November 20, 1991, the National Marine Fisheries Service listed Snake River sockeye salmon as endangered under the Endangered Species Act of 1973. In 1991, the Idaho Department of Fish and Game, the Shoshone-Bannock Tribes, and NMFS initiated efforts to conserve and rebuild populations in Idaho. Captive broodstock program activities conducted between January 1, 1998 and December 31, 1998, are presented in this report

  4. EXTENDCHAIN: a package of computer programs for calculating the buildup of heavy metals, fission products, and activation products in reactor fuel elements

    International Nuclear Information System (INIS)

    Robertson, M.W.

    1977-01-01

    Design of HTGR recycle and refabrication facilities requires a detailed knowledge of the concentrations of around 400 nuclides which are segregated into four different fuel particle types. The EXTENDCHAIN package of computer programs and the supporting input data files were created to provide an efficient method for calculating the 1600 different concentrations required. The EXTENDCHAIN code performs zero-dimensional nuclide burnup, decay, and activation calculations in nine energy groups for up to 108 nuclides per run. Preparation and handling of the input and output for the sixteen EXTENDCHAIN runs required to produce the desired data are the most time consuming tasks in the computation of the spent fuel element composition. The EXTENDCHAIN package of computer programs contains four codes to aid in the preparation and handling of these data. Most of the input data such as cross sections, decay constants, and the nuclide interconnection scheme will not change when calculating new cases. These data were developed for the life cycle of a typical HTGR and stored on archive tapes for future use. The fuel element composition for this typical HTGR life has been calculated and the results for an equilibrium recycle reload are presented. 12 figures, 7 tables

  5. Trip-oriented stochastic optimal energy management strategy for plug-in hybrid electric bus

    International Nuclear Information System (INIS)

    Du, Yongchang; Zhao, Yue; Wang, Qinpu; Zhang, Yuanbo; Xia, Huaicheng

    2016-01-01

    A trip-oriented stochastic optimal energy management strategy for plug-in hybrid electric bus is presented in this paper, which includes the offline stochastic dynamic programming part and the online implementation part performed by equivalent consumption minimization strategy. In the offline part, historical driving cycles of the fixed route are divided into segments according to the position of bus stops, and then a segment-based stochastic driving condition model based on Markov chain is built. With the segment-based stochastic model obtained, the control set for real-time implemented equivalent consumption minimization strategy can be achieved by solving the offline stochastic dynamic programming problem. Results of stochastic dynamic programming are converted into a 3-dimensional lookup table of parameters for online implemented equivalent consumption minimization strategy. The proposed strategy is verified by both simulation and hardware-in-loop test of real-world driving cycle on an urban bus route. Simulation results show that the proposed method outperforms both the well-tuned equivalent consumption minimization strategy and the rule-based strategy in terms of fuel economy, and even proved to be close to the optimal result obtained by dynamic programming. Furthermore, the practical application potential of the proposed control method was proved by hardware-in-loop test. - Highlights: • A stochastic problem was formed based on a stochastic segment-based driving condition model. • Offline stochastic dynamic programming was employed to solve the stochastic problem. • The instant power split decision was made by the online equivalent consumption minimization strategy. • Good performance in fuel economy of the proposed method was verified by simulation results. • Practical application potential of the proposed method was verified by the hardware-in-loop test results.

  6. Standard elements; Elements standards

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Following his own experience the author recalls the various advantages, especially in the laboratory, of having pre-fabricated vacuum-line components at his disposal. (author) [French] A la suite de sa propre experience, l'auteur veut rappeler les divers avantages que presente, tout particulierement en laboratoire, le fait d'avoir a sa disposition des elements pre-fabriques de canalisations a vide. (auteur)

  7. Data transfer over the wide area network with a large round trip time

    Science.gov (United States)

    Matsunaga, H.; Isobe, T.; Mashimo, T.; Sakamoto, H.; Ueda, I.

    2010-04-01

    A Tier-2 regional center is running at the University of Tokyo in Japan. This center receives a large amount of data of the ATLAS experiment from the Tier-1 center in France. Although the link between the two centers has 10Gbps bandwidth, it is not a dedicated link but is shared with other traffic, and the round trip time is 290ms. It is not easy to exploit the available bandwidth for such a link, so-called long fat network. We performed data transfer tests by using GridFTP in various combinations of the parameters, such as the number of parallel streams and the TCP window size. In addition, we have gained experience of the actual data transfer in our production system where the Disk Pool Manager (DPM) is used as the Storage Element and the data transfer is controlled by the File Transfer Service (FTS). We report results of the tests and the daily activity, and discuss the improvement of the data transfer throughput.

  8. Data transfer over the wide area network with a large round trip time

    International Nuclear Information System (INIS)

    Matsunaga, H; Isobe, T; Mashimo, T; Sakamoto, H; Ueda, I

    2010-01-01

    A Tier-2 regional center is running at the University of Tokyo in Japan. This center receives a large amount of data of the ATLAS experiment from the Tier-1 center in France. Although the link between the two centers has 10Gbps bandwidth, it is not a dedicated link but is shared with other traffic, and the round trip time is 290ms. It is not easy to exploit the available bandwidth for such a link, so-called long fat network. We performed data transfer tests by using GridFTP in various combinations of the parameters, such as the number of parallel streams and the TCP window size. In addition, we have gained experience of the actual data transfer in our production system where the Disk Pool Manager (DPM) is used as the Storage Element and the data transfer is controlled by the File Transfer Service (FTS). We report results of the tests and the daily activity, and discuss the improvement of the data transfer throughput.

  9. Selective Oxidation and Reactive Wetting during Galvanizing of a CMnAl TRIP-Assisted Steel

    Science.gov (United States)

    Bellhouse, E. M.; McDermid, J. R.

    2011-09-01

    A transformation induced plasticity (TRIP)-assisted steel with 0.2 pct C, 1.5 pct Mn, and 1.5 pct Al was successfully galvanized using a thermal cycle previously shown to produce an excellent combination of strength and ductility. The steel surface chemistry and oxide morphology were determined as a function of process atmosphere oxygen partial pressure. For the 220 K (-53 °C) dew point (dp) + 20 pct H2 atmosphere, the oxide morphology was a mixture of films and nodules. For the 243 K (-30 °C) dp + 5 pct H2 atmosphere, nodules of MnO were found primarily at grain boundaries. For the 278 K (+5 °C) dp + 5 pct H2 atmosphere, nodules of metallic Fe were found on the surface as a result of alloy element internal oxidation. The steel surface chemistry and oxide morphology were then related to the reactive wetting behavior during continuous hot dip galvanizing. Good wetting was obtained using the two lower oxygen partial pressure process atmospheres [220 K dp and 243 K dp (-53 °C dp and -30 °C dp)]. An increase in the number of bare spots was observed when using the higher oxygen partial pressure process atmosphere (+5 °C dp) due to the increased thickness of localized oxide films.

  10. 41 CFR 302-5.8 - How many househunting trips may my agency authorize in connection with a particular transfer?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false How many househunting trips may my agency authorize in connection with a particular transfer? 302-5.8 Section 302-5.8 Public... EXPENSES Employee's Allowance For Househunting Trip Expenses § 302-5.8 How many househunting trips may my...

  11. Principles of TRIP Steel Optimization for Passive Damping Applications

    Science.gov (United States)

    Fraley, George Jay

    Globally many historic structures of cultural significance which do not have systems to mitigate seismic damage are located in areas with heavy seismic activity. Efforts have been undertaken to develop strategies to retrofit such structures, however any intervention must be limited in size for aesthetic reasons. To contribute to this effort, ArcelorMittal aims to create steel-based solutions for passive energy dissipation through plastic deformation during cyclic loading. High-strength TRansformation-Induced Plasticity (TRIP) steels are proposed as an excellent candidate material for this application, due to the extreme combination of high strength and large ductility they are well-known to exhibit. To evaluate high-strength TRIP steels for passive damping applications, isothermal, fully-reversed, displacement-controlled Ultra-Low Cycle Fatigue (ULCF) experiments (Nf stainless steel 316, despite having a yield strength approximately four times larger. For a similar number of cycles to failure the high stability condition dissipated 2.4 times more energy than stainless steel 316 upon initial cycling. The stress-strain hysteresis curves and fatigue life data generated can be input into computational models of passive damping devices for initial concurrent material/device design iterations. Evidence of shear lips, large primary inclusions serving as fracture-initiation sites, and highly dimpled fracture surfaces confirmed for all failed specimens that ductile fracture mechanisms contribute to failure under ULCF conditions. For specimens failing in 10-11 cycles large protrusions aligned along the transverse direction were found, indicating that intergranular fracture may also be playing a role in ULCF failures for this alloy. To explore lower cost alternatives to fully-austenitic TRIP steels for passive-damping devices, austenite precipitation and its effect on uniaxial-tension mechanical properties in martensitic steels was investigated. Isothermal dilatometry

  12. Generalized finite elements

    International Nuclear Information System (INIS)

    Wachspress, E.

    2009-01-01

    Triangles and rectangles are the ubiquitous elements in finite element studies. Only these elements admit polynomial basis functions. Rational functions provide a basis for elements having any number of straight and curved sides. Numerical complexities initially associated with rational bases precluded extensive use. Recent analysis has reduced these difficulties and programs have been written to illustrate effectiveness. Although incorporation in major finite element software requires considerable effort, there are advantages in some applications which warrant implementation. An outline of the basic theory and of recent innovations is presented here. (authors)

  13. Transcription regulator TRIP-Br2 mediates ER stress-induced brown adipocytes dysfunction.

    Science.gov (United States)

    Qiang, Guifen; Whang Kong, Hyerim; Gil, Victoria; Liew, Chong Wee

    2017-01-09

    In contrast to white adipose tissue, brown adipose tissue (BAT) is known to play critical roles for both basal and inducible energy expenditure. Obesity is associated with reduction of BAT function; however, it is not well understood how obesity promotes BAT dysfunction, especially at the molecular level. Here we show that the transcription regulator TRIP-Br2 mediates ER stress-induced inhibition of lipolysis and thermogenesis in BAT. Using in vitro, ex vivo, and in vivo approaches, we demonstrate that obesity-induced inflammation upregulates brown adipocytes TRIP-Br2 expression via the ER stress pathway and amelioration of ER stress in mice completely abolishes high fat diet-induced upregulation of TRIP-Br2 in BAT. We find that increased TRIP-Br2 significantly inhibits brown adipocytes thermogenesis. Finally, we show that ablation of TRIP-Br2 ameliorates ER stress-induced inhibition on lipolysis, fatty acid oxidation, oxidative metabolism, and thermogenesis in brown adipocytes. Taken together, our current study demonstrates a role for TRIP-Br2 in ER stress-induced BAT dysfunction, and inhibiting TRIP-Br2 could be a potential approach for counteracting obesity-induced BAT dysfunction.

  14. Evaluation of the root cause for MSR high level trip in Maanshan

    International Nuclear Information System (INIS)

    Liao, L.-Y.; Ferng, Y.-M.; Jange, S.J.; Ko, C.M.

    2004-01-01

    Reactor trip due to Moisture Separator Reheater (MSR) high water level has been a long time issue for Maanshan nuclear power plant. The operating experience shows that there are five reactor trips due to MSR high water level. Four out of the five reactor trips are generated when Combined Intermediate valve (CIV) no. 1 is closed during CIV closure test. The fifth reactor trip occurs when the reactor power is increasing from 99% to 100%. An extensive root cause analysis has been performed by Taipower Company. It is concluded that the water accumulated in the cross under leg between the exhaust of high pressure turbine and the inlet of MSR was the water source contributing to the MSR high level trip. Although, Maanshan does not have similar trip after the root cause analysis, it is interested to evaluate the proposed root cause from thermal hydraulic point of view. It is also hoped that some useful guidelines can be established. This paper includes a description of the scenario of reactor trips, a summary of the root cause analysis done by Taipower Company, an examination of possible mechanisms, an identification of key parameters and a presentation of major findings. In addition, the applicability of RELAP5/MOD3 under this condition is discussed. (author)

  15. The study on the threshold strain of microvoid formation in TRIP steels during tensile deformation

    International Nuclear Information System (INIS)

    Wang Wurong; Guo Bimeng; Ji Yurong; He Changwei; Wei Xicheng

    2012-01-01

    Highlights: ► The tensile mechanical behaviors of TRIP steels were studied under high rate deformation conditions. ► The threshold strain of microvoid formation was examined quantitatively. ► The effects of retained austenite of TRIP on suppressing microvoid formed during tensile process have been discussed. - Abstract: Transformation Induced Plasticity (TRIP) steels exhibit a better combination of strength and ductility properties than conventional high strength low alloy (HSLA) steels, and therefore receive considerable attention in the automotive industry. In this work, the tensile mechanical behaviors of TRIP-aided steels were studied under the condition of the quasi-static and high deformed rates. The deformed specimens were observed by scanning electron microscope (SEM) along the tensile axis. The threshold strain of microvoid formation was examined quantitatively according to the evolution of deformation. The results showed that: the yield and tensile strengths of TRIP steels increase with the strain rate, whereas their elongations decrease. However, the threshold strain for TRIP steels at high strain rate is larger than that at low strain rate. Comparing with the deformed microstructure and microvoids formed in the necking zone of dual phase (DP) steel, the progressive deformation-induced transformation of retained austenite in TRIP steels remarkably increases the threshold strain of microvoid formation and furthermore postpones its growth and coalescence.

  16. The FieldTrip-SimBio pipeline for EEG forward solutions.

    Science.gov (United States)

    Vorwerk, Johannes; Oostenveld, Robert; Piastra, Maria Carla; Magyari, Lilla; Wolters, Carsten H

    2018-03-27

    Accurately solving the electroencephalography (EEG) forward problem is crucial for precise EEG source analysis. Previous studies have shown that the use of multicompartment head models in combination with the finite element method (FEM) can yield high accuracies both numerically and with regard to the geometrical approximation of the human head. However, the workload for the generation of multicompartment head models has often been too high and the use of publicly available FEM implementations too complicated for a wider application of FEM in research studies. In this paper, we present a MATLAB-based pipeline that aims to resolve this lack of easy-to-use integrated software solutions. The presented pipeline allows for the easy application of five-compartment head models with the FEM within the FieldTrip toolbox for EEG source analysis. The FEM from the SimBio toolbox, more specifically the St. Venant approach, was integrated into the FieldTrip toolbox. We give a short sketch of the implementation and its application, and we perform a source localization of somatosensory evoked potentials (SEPs) using this pipeline. We then evaluate the accuracy that can be achieved using the automatically generated five-compartment hexahedral head model [skin, skull, cerebrospinal fluid (CSF), gray matter, white matter] in comparison to a highly accurate tetrahedral head model that was generated on the basis of a semiautomatic segmentation with very careful and time-consuming manual corrections. The source analysis of the SEP data correctly localizes the P20 component and achieves a high goodness of fit. The subsequent comparison to the highly detailed tetrahedral head model shows that the automatically generated five-compartment head model performs about as well as a highly detailed four-compartment head model (skin, skull, CSF, brain). This is a significant improvement in comparison to a three-compartment head model, which is frequently used in praxis, since the importance of

  17. Multi-Destination and Multi-Purpose Trip Effects in the Analysis of the Demand for Trips to a Remote Recreational Site

    Science.gov (United States)

    Martínez-Espiñeira, Roberto; Amoako-Tuffour, Joe

    2009-06-01

    One of the basic assumptions of the travel cost method for recreational demand analysis is that the travel cost is always incurred for a single purpose recreational trip. Several studies have skirted around the issue with simplifying assumptions and dropping observations considered as nonconventional holiday-makers or as nontraditional visitors from the sample. The effect of such simplifications on the benefit estimates remains conjectural. Given the remoteness of notable recreational parks, multi-destination or multi-purpose trips are not uncommon. This article examines the consequences of allocating travel costs to a recreational site when some trips were taken for purposes other than recreation and/or included visits to other recreational sites. Using a multi-purpose weighting approach on data from Gros Morne National Park, Canada, we conclude that a proper correction for multi-destination or multi-purpose trip is more of what is needed to avoid potential biases in the estimated effects of the price (travel-cost) variable and of the income variable in the trip generation equation.

  18. Scaling up the mining of semantically-enriched trajectories: TripBuilder at the world level

    OpenAIRE

    Brilhante, Igo; Macedo, Jose Antonio; Nardini, Franco Maria; Perego, Raffaele; Renso, Chiara

    2015-01-01

    TripBuilder is an unsupervised system helping tourists to build their own personalized sightseeing tour [1,3,2]. Given a target touristic city, the time available for the visit, and the tourist's profile, TripBuilder provides a time-budgeted tour that maximizes tourist's interests and takes into account both the time needed to enjoy the at- tractions and to move from one Point of Interest (PoI) to the next one. The knowledge base feeding the sightseeing tour generation algorithm of TripBuilde...

  19. Field trip report: Observations made at Yucca Mountain, Nye County, Nevada. Special report No. 2

    International Nuclear Information System (INIS)

    Hill, C.A.

    1993-03-01

    A field trip was made to the Yucca Mountain area on December 5-9, 1992 by Jerry Frazier, Don Livingston, Christine Schluter, Russell Harmon, and Carol Hill. Forty-three separate stops were made and 275 lbs. of rocks were collected during the five days of the field trip. Key localities visited were the Bare Mountains, Yucca Mountain, Calico Hills, Busted Butte, Harper Valley, Red Cliff Gulch, Wahmonie Hills, Crater Flat, and Lathrop Wells Cone. This report only describes field observations made by Carol Hill. Drawings are used rather than photographs because cameras were not permitted on the Nevada Test Site during this trip

  20. Trip Travel Time Forecasting Based on Selective Forgetting Extreme Learning Machine

    Directory of Open Access Journals (Sweden)

    Zhiming Gui

    2014-01-01

    Full Text Available Travel time estimation on road networks is a valuable traffic metric. In this paper, we propose a machine learning based method for trip travel time estimation in road networks. The method uses the historical trip information extracted from taxis trace data as the training data. An optimized online sequential extreme machine, selective forgetting extreme learning machine, is adopted to make the prediction. Its selective forgetting learning ability enables the prediction algorithm to adapt to trip conditions changes well. Experimental results using real-life taxis trace data show that the forecasting model provides an effective and practical way for the travel time forecasting.

  1. TRIP-Br2 promotes oncogenesis in nude mice and is frequently overexpressed in multiple human tumors.

    Science.gov (United States)

    Cheong, Jit Kong; Gunaratnam, Lakshman; Zang, Zhi Jiang; Yang, Christopher M; Sun, Xiaoming; Nasr, Susan L; Sim, Khe Guan; Peh, Bee Keow; Rashid, Suhaimi Bin Abdul; Bonventre, Joseph V; Salto-Tellez, Manuel; Hsu, Stephen I

    2009-01-20

    Members of the TRIP-Br/SERTAD family of mammalian transcriptional coregulators have recently been implicated in E2F-mediated cell cycle progression and tumorigenesis. We, herein, focus on the detailed functional characterization of the least understood member of the TRIP-Br/SERTAD protein family, TRIP-Br2 (SERTAD2). Oncogenic potential of TRIP-Br2 was demonstrated by (1) inoculation of NIH3T3 fibroblasts, which were engineered to stably overexpress ectopic TRIP-Br2, into athymic nude mice for tumor induction and (2) comprehensive immunohistochemical high-throughput screening of TRIP-Br2 protein expression in multiple human tumor cell lines and human tumor tissue microarrays (TMAs). Clinicopathologic analysis was conducted to assess the potential of TRIP-Br2 as a novel prognostic marker of human cancer. RNA interference of TRIP-Br2 expression in HCT-116 colorectal carcinoma cells was performed to determine the potential of TRIP-Br2 as a novel chemotherapeutic drug target. Overexpression of TRIP-Br2 is sufficient to transform murine fibroblasts and promotes tumorigenesis in nude mice. The transformed phenotype is characterized by deregulation of the E2F/DP-transcriptional pathway through upregulation of the key E2F-responsive genes CYCLIN E, CYCLIN A2, CDC6 and DHFR. TRIP-Br2 is frequently overexpressed in both cancer cell lines and multiple human tumors. Clinicopathologic correlation indicates that overexpression of TRIP-Br2 in hepatocellular carcinoma is associated with a worse clinical outcome by Kaplan-Meier survival analysis. Small interfering RNA-mediated (siRNA) knockdown of TRIP-Br2 was sufficient to inhibit cell-autonomous growth of HCT-116 cells in vitro. This study identifies TRIP-Br2 as a bona-fide protooncogene and supports the potential for TRIP-Br2 as a novel prognostic marker and a chemotherapeutic drug target in human cancer.

  2. Sensitivity analyses of the peach bottom turbine trip 2 experiment

    International Nuclear Information System (INIS)

    Bousbia Salah, A.; D'Auria, F.

    2003-01-01

    In the light of the sustained development in computer technology, the possibilities for code calculations in predicting more realistic transient scenarios in nuclear power plants have been enlarged substantially. Therefore, it becomes feasible to perform 'Best-estimate' simulations through the incorporation of three-dimensional modeling of reactor core into system codes. This method is particularly suited for complex transients that involve strong feedback effects between thermal-hydraulics and kinetics as well as to transient involving local asymmetric effects. The Peach bottom turbine trip test is characterized by a prompt core power excursion followed by a self limiting power behavior. To emphasize and understand the feedback mechanisms involved during this transient, a series of sensitivity analyses were carried out. This should allow the characterization of discrepancies between measured and calculated trends and assess the impact of the thermal-hydraulic and kinetic response of the used models. On the whole, the data comparison revealed a close dependency of the power excursion with the core feedback mechanisms. Thus for a better best estimate simulation of the transient, both of the thermal-hydraulic and the kinetic models should be made more accurate. (author)

  3. Meaningful Field Trip in Education of Renewable Energy Technologies

    Directory of Open Access Journals (Sweden)

    Hasan Said Tortop

    2013-06-01

    Full Text Available Renewable energy sources, in terms of countries‟ obtaining their energy needs from clean and without harming the environment is becoming increasingly important. This situation also requires improving the quality of science education will be given in this field. In this activity, in a field trip to the center for the renewable energy resources technologies, the application of learning cycle model appropriate for constructivist approach is shown. In the example of solar chimney activity according to 5E model, in elaboration step, students, by using their imagination and creativity, put out recommendations and new designs for the efficiency of the application of solar chimney. It is quite important for educators to follow what kind of acquisitions that students will gain and what kind of changes will occur in their perceptions and attitudes towards renewable energy technologies thanks to this activity. Related documents are in attachments. This activity has been very helpful in the education of young scientists on the field of renewable energy sources technologies.

  4. Deformation-Induced Microstructural Banding in TRIP Steels

    Science.gov (United States)

    Celotto, S.; Ghadbeigi, H.; Pinna, C.; Shollock, B. A.; Efthymiadis, P.

    2018-05-01

    Microstructure inhomogeneities can strongly influence the mechanical properties of advanced high-strength steels in a detrimental manner. This study of a transformation-induced plasticity (TRIP) steel investigates the effect of pre-existing contiguous grain boundary networks (CGBNs) of hard second-phases and shows how these develop into bands during tensile testing using in situ observations in conjunction with digital image correlation (DIC). The bands form by the lateral contraction of the soft ferrite matrix, which rotates and displaces the CGBNs of second-phases and the individual features within them to become aligned with the loading direction. The more extensive pre-existing CGBNs that were before the deformation already aligned with the loading direction are the most critical microstructural feature for damage initiation and propagation. They induce micro-void formation between the hard second-phases along them, which coalesce and develop into long macroscopic fissures. The hard phases, retained austenite and martensite, were not differentiated as it was found that the individual phases do not play a role in the formation of these bands. It is suggested that minimizing the presence of CGBNs of hard second-phases in the initial microstructure will increase the formability.

  5. Trip report: a visit to the Swedish reindeer industry, 1986

    International Nuclear Information System (INIS)

    Dau, J.; Dieterich, R.A.; Thomas, W.C.; Davis, L.T.

    1987-01-01

    The State of Alaska indicated recently that it will become more strict in enforcing inspection requirements for reindeer meat that is mixed with meat from domestic animals (e.g., In sausage production). Therefore. we wanted to observe how reindeer are slaughtered to meet Swedish meat inspection requirements. Additionally, by following the processing and marketing of reindeer in Sweden, we hoped to discover alternative products that do not require blending reindeer with beef or pork. The Chernobyl tragedy further affected our decision to visit Sweden in two ways It gave us the opportunity to review the Impacts of widespread, Intense radioactive contamination on reindeer and the reindeer industry: and it created a shortage or reindeer for human consumption in Sweden which In turn appeared to open a market for Alaska reindeer products. Between 13 and 23 November 1986, we traveled to Sweden to meet suppliers and processors in the Swedish reindeer (Rangifer tarandus tarandus) industry. Wholesale and retail marketing of reindeer were reviewed in Stockholm; corralling, slaughter, and processing of reindeer were observed in Swedish Lapland. The specific objectives of this trip were as follows: 1) to observe reindeer slaughter facilities and techniques used in Sweden; 2) to trace the marketing of reindeer from Sami herders to retail outlets; 3) to assess radioactive contamination of reindeer and their ranges and observe how the problem is being handled; 4) to observe as many reindeer husbandry techniques as possible; and 5) to explore the possibility of establishing a market for Alaskan reindeer meat in Sweden

  6. Diffraction study of the retained austenite content in TRIP steels

    Energy Technology Data Exchange (ETDEWEB)

    Gnaeupel-Herold, T., E-mail: tg-h@nist.gov [NIST Center for Neuron Research, 100 Bureau Dr., Gaithersburg MD 20899-6102 (United States); University of Maryland, Department of Material Science and Engineering., College Park MD 20742-2142 (United States); Creuziger, A., E-mail: adam.creuziger@nist.gov [NIST Metallurgy Division, 100 Bureau Dr., Gaithersburg MD 20899-8553 (United States); Kent State University, Kent, OH 44242 (United States)

    2011-04-25

    Research highlights: {yields} Novel orientation averaging scheme for retained austenite content measurement. {yields} assumption of random grain orientation generally not justified. {yields} Averaging scheme allows to disregard texture. {yields} unlike Rietveld method, averaging method does not orientation density function. {yields} Two independent (hkl) are necessary for retained austenite content. - Abstract: The results of a study of using neutron diffraction for determining the retained austenite content of TRIP steels are presented. The study covers a wide area of materials, deformation modes (uniaxial, biaxial and plane strain), strains, and the retained austenite content as a result of these variables. It was determined using basic principles of statistics that a minimum of two reflections (hkl) for each phase is necessary to calculate a phase mass fraction and the associated standard deviation. Texture from processing the steel is the largest source of uncertainty. Through the method of complete orientation averaging described in this paper, the texture effect and with it the standard deviation of the austenite mass fraction can be substantially reduced, regardless of the type or severity of the texture.

  7. Medical assessment of the health effects of short leisure trips.

    Science.gov (United States)

    Toda, Masahiro; Makino, Hiroaki; Kobayashi, Hidetoshi; Nagasawa, Shingo; Kitamura, Kazuyuki; Morimoto, Kanehisa

    2004-12-01

    Using responses to questionnaires and results of saliva samples from 40 women, the authors assessed the effects on health of participation in a short leisure trip (2 nights, 3 d) to Kyushu Island in Japan. They addressed transportation, sightseeing, and group activities during the tour, which might differ from participants' usual activities. Levels of the salivary endocrinological stress markers cortisol and chromogranin A (CgA) were determined by enzyme-linked immunosorbent assay (ELISA). In each of the groups with characteristics considered healthy and related to lifestyle, patterns of behavior, perceived stressors, and stress reactions, a decrease in the cortisol levels and an increase in the CgA levels were apparent during the tour. The baseline for stress hormone changes was the levels on awakening on Day 1 (i.e., immediately before the tour). These findings suggest that even short periods of travel can bring about a reduction in di-stress and acquisition of eu-stress, experienced as feeling uplifted or fulfilled.

  8. Collective human mobility pattern from taxi trips in urban area

    KAUST Repository

    Peng, Chengbin

    2012-04-18

    We analyze the passengers\\' traffic pattern for 1.58 million taxi trips of Shanghai, China. By employing the non-negative matrix factorization and optimization methods, we find that, people travel on workdays mainly for three purposes: commuting between home and workplace, traveling from workplace to workplace, and others such as leisure activities. Therefore, traffic flow in one area or between any pair of locations can be approximated by a linear combination of three basis flows, corresponding to the three purposes respectively. We name the coefficients in the linear combination as traffic powers, each of which indicates the strength of each basis flow. The traffic powers on different days are typically different even for the same location, due to the uncertainty of the human motion. Therefore, we provide a probability distribution function for the relative deviation of the traffic power. This distribution function is in terms of a series of functions for normalized binomial distributions. It can be well explained by statistical theories and is verified by empirical data. These findings are applicable in predicting the road traffic, tracing the traffic pattern and diagnosing the traffic related abnormal events. These results can also be used to infer land uses of urban area quite parsimoniously. 2012 Peng et al.

  9. Heavy element research

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    Heavy element research activities in metallurgy and ceramics during 1976 at Lawrence Berkeley Laboratory are reviewed. Topics include: microstructure, properties and alloy design; ceramic alloy program; high resolution and high voltage electron microscopy; and powder metallurgy

  10. Macrostructural and microstructural features of 1 000 MPa grade TRIP steel joint by CO2 laser welding

    Institute of Scientific and Technical Information of China (English)

    Wang Wenquan; Sun Daqian; Kang Chungyun

    2008-01-01

    Bead-on-plate CO2 laser welding of 1 000 MPa grade transformation induced plasticity (TRIP) steel was conducted under different welding powers, welding speeds and shield gases. The macrostructural and microstructural features of the welded joint were investigated. The increase of welding speed reduced the width of the weld bead and the porosities in the weld bead resulting from the different flow mode of melted metal in weld pool. The decrease of welding power or use of shield gas of helium also contributed to the reduction of porosity in the weld bead due to the alleviation of induced plasma formation, thus stabilizing the keyhole. The porosity formation intimately correlated with the evaporation of alloy element Mn in the base metal. The laser welded metal had same martensite microstructure as that of water-quenched base metal. The welding parameters which increased cooling rate all led to fine microstructures of the weld bead.

  11. A Lean, Fast Mars Round-trip Mission Architecture: Using Current Technologies for a Human Mission in the 2030s

    Science.gov (United States)

    Bailey, Lora; Folta, David; Barbee, Brent W.; Vaughn, Frank; Kirchman, Frank; Englander, Jacob; Campbell, Bruce; Thronson, Harley; Lin, Tzu Yu

    2013-01-01

    We present a lean fast-transfer architecture concept for a first human mission to Mars that utilizes current technologies and two pivotal parameters: an end-to-end Mars mission duration of approximately one year, and a deep space habitat of approximately 50 metric tons. These parameters were formulated by a 2012 deep space habitat study conducted at the NASA Johnson Space Center (JSC) that focused on a subset of recognized high- engineering-risk factors that may otherwise limit space travel to destinations such as Mars or near-Earth asteroid (NEA)s. With these constraints, we model and promote Mars mission opportunities in the 2030s enabled by a combination of on-orbit staging, mission element pre-positioning, and unique round-trip trajectories identified by state-of-the-art astrodynamics algorithms.

  12. Concentration of elements in whole-body fish, fish fillets, fish muscle plugs, and fish eggs from the 2008 Missouri Department of Conservation General Contaminant Monitoring Program

    Science.gov (United States)

    May, Thomas W.; Walther, Michael J.; Brumbaugh, William G.; McKee, Michael J.

    2009-01-01

    This report presents the results of a contaminant monitoring survey conducted annually by the Missouri Department of Conservation to examine the levels of selected elemental contaminants in whole-body fish, fish fillets, fish muscle plugs, and fish eggs. Whole-body, fillet, or egg samples of catfish (Ictalurus punctatus, Ictalurus furcatus, Pylodictis olivaris), largemouth bass (Micropterus salmoides), walleye (Sander vitreus), crappie (Pomoxis annularis, Pomoxis nigromaculatus), shovelnose sturgeon (Scaphirhynchus platorynchus), northern hog sucker (Hypentelium nigricans), and Missouri saddled darter (Etheostoma tetrazonum) were collected from 23 sites as part of the Missouri Department of Conservation's Fish Contaminant Monitoring Program. Fish dorsal muscle plugs also were collected from walleye (Sander vitreus) at one of the sites.

  13. Concentrations of elements in fish fillets, fish muscle plugs, and crayfish from the 2007 Missouri Department of Conservation General Contaminant Monitoring Program

    Science.gov (United States)

    May, Thomas W.; Walther, Michael J.; Brumbaugh, William G.; McKee, Michael J.

    2009-01-01

    This report presents the results of a contaminant monitoring survey conducted annually by the Missouri Department of Conservation to examine the levels of selected elemental contaminants in fish fillets, fish muscle plugs, and crayfish. Fillets of channel catfish (Ictalurus punctatus), bass (Micropterus salmoides, Micropterus dolomieu, Morone chrysops), walleye (Sander vitreus), common carp (Cyprinus carpio), lake sturgeon (Acipenser fulvescens), northern hog sucker (Hypentelium nigricans), and rainbow trout (Oncorhynchus mykiss) were collected from 21 sites as part of the Department's Fish Contaminant Monitoring Program. Long-pincered crayfish (Orconectes longidigitus) were collected from one site to assess trophic transfer of metals to fish. Fish muscle plugs were collected from smallmouth bass (Micropterus dolomieu) at two different locations from one site.

  14. Galvanic element. Galvanisches Element

    Energy Technology Data Exchange (ETDEWEB)

    Sprengel, D.; Haelbig, H.

    1980-01-03

    The invention concerns a gas-tight sealed accumulator with positive and negative electrode plates and an auxillary electrode electroconductively bound to the latter for suppressing oxygen pressure. The auxillary electrode is an intermediate film electrode. The film catalysing oxygen reduction is hydrophilic in character and the other film is hydrophobic. A double coated foil has proved to be advantageous, the hydrophilic film being formed from polymer-bound activated carbon and the hydrophrobic film from porous polytetrafluoroethylene. A metallic network of silver or nickel is rolled into the outer side of the activated carbon film. This auxillary electrode can be used to advantage in all galvanic elements. Even primary cells fall within the scope of application for auxillary electrodes because many of these contain a highly oxidized electrodic material which tends to give off oxygen.

  15. Survey on how fluctuating petrol prices are affecting Malaysian large city dwellers in changing their trip patterns

    Science.gov (United States)

    Rohani, M. M.; Pahazri, N.

    2018-04-01

    Rising fuel prices shocks have a significant impact on the way of life of most Malaysians. Due to the rising of oil prices, the costs of travel for private vehicle users are therefore increasing. The study was conducted based on the objective of studying the impact of rising fuel prices on three types of trip patterns of Malaysians who are living in the city areas. The three types of trip patterns are, workplaces trip, leisure trip and personal purposes trip during the weekdays. This study was conducted by distributing questionnaires to respondents of private vehicle users in selected city such as Johor Bahru, Kuala Lumpur, Putrajaya, Melaka, Perak, Selangor and Kelantan. This study, found that the trip patterns of those who were using their own vehicles had changed after the rising of fuel prices. The changes showed that many private vehicle users were taking steps to save money on petrol by adjusting their trips.

  16. Review of Trace-Element Field-Blank Data Collected for the California Groundwater Ambient Monitoring and Assessment (GAMA) Program, May 2004-January 2008

    Science.gov (United States)

    Olsen, Lisa D.; Fram, Miranda S.; Belitz, Kenneth

    2010-01-01

    Trace-element quality-control samples (for example, source-solution blanks, field blanks, and field replicates) were collected as part of a statewide investigation of groundwater quality in California, known as the Priority Basins Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basins Project is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB) to assess and monitor the quality of groundwater resources used for drinking-water supply and to improve public knowledge of groundwater quality in California. Trace-element field blanks were collected to evaluate potential bias in the corresponding environmental data. Bias in the environmental data could result from contamination in the field during sample collection, from the groundwater coming into contact with contaminants on equipment surfaces or from other sources, or from processing, shipping, or analyzing the samples. Bias affects the interpretation of environmental data, particularly if any constituents are present solely as a result of extrinsic contamination that would have otherwise been absent from the groundwater that was sampled. Field blanks were collected, analyzed, and reviewed to identify and quantify extrinsic contamination bias. Data derived from source-solution blanks and laboratory quality-control samples also were considered in evaluating potential contamination bias. Eighty-six field-blank samples collected from May 2004 to January 2008 were analyzed for the concentrations of 25 trace elements. Results from these field blanks were used to interpret the data for the 816 samples of untreated groundwater collected over the same period. Constituents analyzed were aluminum (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), boron (B), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), lithium (Li), manganese (Mn), mercury (Hg), molybdenum

  17. ON PROBABILITY FUNCTION OF TRIP ROUTE CHOICE IN PASSENGER TRANSPORT SYSTEM OF CITIES

    Directory of Open Access Journals (Sweden)

    N. Nefedof

    2014-02-01

    Full Text Available The results of statistical processing of experimental research data in Kharkiv, aimed at determining the relation between the passenger trip choice probability and the actual vehicles waiting time at bus terminals are presented.

  18. Multi-modal trip planning system : Northeastern Illinois Regional Transportation Authority.

    Science.gov (United States)

    2013-01-01

    This report evaluates the Multi-Modal Trip Planner System (MMTPS) implemented by the Northeastern Illinois Regional Transportation Authority (RTA) against the specific functional objectives enumerated by the Federal Transit Administration (FTA) in it...

  19. Health Effect of Forest Bathing Trip on Elderly Patients with Chronic Obstructive Pulmonary Disease.

    Science.gov (United States)

    Jia, Bing Bing; Yang, Zhou Xin; Mao, Gen Xiang; Lyu, Yuan Dong; Wen, Xiao Lin; Xu, Wei Hong; Lyu, Xiao Ling; Cao, Yong Bao; Wang, Guo Fu

    2016-03-01

    Forest bathing trip is a short, leisurely visit to forest. In this study we determined the health effects of forest bathing trip on elderly patients with chronic obstructive pulmonary disease (COPD). The patients were randomly divided into two groups. One group was sent to forest, and the other was sent to an urban area as control. Flow cytometry, ELISA, and profile of mood states (POMS) evaluation were performed. In the forest group, we found a significant decrease of perforin and granzyme B expressions, accompanied by decreased levels of pro-inflammatory cytokines and stress hormones. Meanwhile, the scores in the negative subscales of POMS decreased after forest bathing trip. These results indicate that forest bathing trip has health effect on elderly COPD patients by reducing inflammation and stress level. Copyright © 2016 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

  20. Analysis methodology for the post-trip return to power steam line break event

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chul Shin; Kim, Chul Woo; You, Hyung Keun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-01

    An analysis for Steam Line Break (SLB) events which result in a Return-to-Power (RTP) condition after reactor trip was performed for a postulated Yonggwang Nuclear Power Plant Unit 3 cycle 8. Analysis methodology for post-trip RTP SLB is quite different from that of non-RTP SLB and is more difficult. Therefore, it is necessary to develop a methodology to analyze the response of the NSSS parameters to the post-trip RTP SLB events and the fuel performance after the total reactivity exceeds the criticality. In this analysis, the cases with and without offsite power were simulated crediting 3-D reactivity feedback effect due to a local heatup in the vicinity of stuck CEA and compared with the cases without 3-D reactivity feedback with respect to post-trip fuel performance. Departure-to Nucleate Boiling Ratio (DNBR) and Linear Heat Generation Rate (LHGR). 36 tabs., 32 figs., 11 refs. (Author) .new.

  1. 0-6760 : improved trip generation data for Texas using workplace and special generator surveys.

    Science.gov (United States)

    2014-08-01

    Trip generation rates play an important role in : transportation planning, which can help in : making informed decisions about future : transportation investment and design. However, : sometimes the rates are derived from small : sample sizes or may ...

  2. Planning a pharmacy-led medical mission trip, part 2: servant leadership and team dynamics.

    Science.gov (United States)

    Brown, Dana A; Brown, Daniel L; Yocum, Christine K

    2012-06-01

    While pharmacy curricula can prepare students for the cognitive domains of pharmacy practice, mastery of the affective aspects can prove to be more challenging. At the Gregory School of Pharmacy, medical mission trips have been highly effective means of impacting student attitudes and beliefs. Specifically, these trips have led to transformational changes in student leadership capacity, turning an act of service into an act of influence. Additionally, building team unity is invaluable to the overall effectiveness of the trip. Pre-trip preparation for teams includes activities such as routine team meetings, team-building activities, and implementation of committees, as a means of promoting positive team dynamics. While in the field, team dynamics can be fostered through activities such as daily debriefing sessions, team disclosure times, and provision of medical services.

  3. Passive control of cavitating flow around an axisymmetric projectile by using a trip bar

    Directory of Open Access Journals (Sweden)

    Jian Huang

    2017-07-01

    Full Text Available Quasi-periodical evolutions such as shedding and collapsing of unsteady cloud cavitating flow, induce strong pressure fluctuations, what may deteriorate maneuvering stability and corrode surfaces of underwater vehicles. This paper analyzed effects on cavitation stability of a trip bar arranged on high-speed underwater projectile. Small scale water tank experiment and large eddy simulation using the open source software OpenFOAM were used, and the results agree well with each other. Results also indicate that trip bar can obstruct downstream re-entrant jet and pressure wave propagation caused by collapse, resulting in a relatively stable sheet cavity between trip bar and shoulder of projectiles. Keywords: Unsteady cavitating flow, Trip bar, Re-entrant jet, Passive flow control

  4. Trip-oriented travel time prediction (TOTTP) with historical vehicle trajectories

    Science.gov (United States)

    Xu, Tao; Li, Xiang; Claramunt, Christophe

    2018-06-01

    Accurate travel time prediction is undoubtedly of importance to both traffic managers and travelers. In highly-urbanized areas, trip-oriented travel time prediction (TOTTP) is valuable to travelers rather than traffic managers as the former usually expect to know the travel time of a trip which may cross over multiple road sections. There are two obstacles to the development of TOTTP, including traffic complexity and traffic data coverage.With large scale historical vehicle trajectory data and meteorology data, this research develops a BPNN-based approach through integrating multiple factors affecting trip travel time into a BPNN model to predict trip-oriented travel time for OD pairs in urban network. Results of experiments demonstrate that it helps discover the dominate trends of travel time changes daily and weekly, and the impact of weather conditions is non-trivial.

  5. Control rod trip failures; Salem 1, the cause, response, and potential fixes

    International Nuclear Information System (INIS)

    Hall, R.E.; Boccio, J.L.; Luckas, W.J.

    1984-01-01

    This chapter presents a systems and reliability analysis of recent nuclear reactor control rod failure-to-trip (or scram) events that have been experienced in the US commercial nuclear industry. The operational factors of hardware, procedures, and human error are considered in the analysis of transients without scram. The 1980 Browns Ferry 3 scram system failure is analyzed to contrast the two 1983 Salem 1 events. The details of the Salem control rod failure to trip are investigated and used to calculate the reactor protection system unavailabilities. The internal reactor trip breaker logic is reviewed as related to the Westinghouse DB-50 breaker application. The impact of test and maintenance on system challenges is discussed. It is concluded that although the failure to trip or scram represents a single class of initiators, the actual events of each transient are operationally unique and require individual human responses

  6. Online transit trip planner for small agencies using Google Transit : final deployment package.

    Science.gov (United States)

    2011-09-01

    Google Transit is a public transportation trip planner that enables travelers to obtain information regarding available transit services between a : given origin and given destination. While transit agencies can publish their service information onto...

  7. SmartTrips Ithaca : encouraging sustainable transportation options through a personalized educational campaign : final report.

    Science.gov (United States)

    2017-03-01

    SmartTrips Ithaca is a neighborhood-based personalized educational campaign that encouraged residents : of downtown Ithaca to try out sustainable modes of transportation such as walking, biking, transit, and : carsharing through incentives and commun...

  8. Ocean Thermal Energy Conversion power system development. Phase I: preliminary design. Final report. [ODSP-3 code; OTEC Steady-State Analysis Program

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    The following appendices are included; Dynamic Simulation Program (ODSP-3); sample results of dynamic simulation; trip report - NH/sub 3/ safety precautions/accident records; trip report - US Coast Guard Headquarters; OTEC power system development, preliminary design test program report; medium turbine generator inspection point program; net energy analysis; bus bar cost of electricity; OTEC technical specifications; and engineer drawings. (WHK)

  9. Deklarasi Doha dalam Perspektif Akses Obat Murah dan Terjangkau: sebuah Pelengkap Perjanjian TRIPS

    OpenAIRE

    Utomo, Tomi Suryo

    2007-01-01

    The Doha Declaration was developed after protests from developing and least developed countries asserting the TRIPS safeguards were unclear and ambiguous. Developing countries and least developed countries sought an interpretive tool for the TRIPS safeguards which fulfills the requirements of International law, in particular the Vienna Convention on the Law of Treaties and the legislative process of negotiation under the WTO decision making framework. Through the Doha Declaration, developing ...

  10. Spatial interaction models from Irish commuting data: variations in trip length by occupation and gender

    Science.gov (United States)

    O'Kelly, Morton E.; Niedzielski, Michael A.; Gleeson, Justin

    2012-10-01

    Core and peripheral contrasts in journey-to-work trip length can be interpreted as imputing the relative value of origin and destination accessibility (yielding theoretical proxies for rent and wages). Because the main variables are shown to be critically dependent on spatial structure, they may be interpreted as showing the shadow prices due to comparative location. There is also a unifying connection between these results and the existing literature on many dimensions: rent gradients, accessibility, and emissivity. In an empirical example, the advantages of a panoramic view of national commuting statistics are shown, using an Irish data set. Variations in the rates of participation in trip making by location, occupation, and gender are examined. Places that emit more trips than would be expected from their relative location are identified. Further, examining ways in which such emissivity is sensitive to a change in trip length highlights the regions where trips could possibly be adjusted to produce a shorter average trip length or which might be especially sensitive to reduction in employment. A careful reinterpretation of one of the key outputs from a calibrated spatial interaction model is shown to be consistent with the declining rent gradient expected from Alonso's theory of land use.

  11. Investigations on human error hazards in recent unintended trip events of Korean nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sa Kil; Jang, Tong Il; Lee, Yong Hee; Shin, Kwang Hyeon [KAERI, Daejeon (Korea, Republic of)

    2012-10-15

    According to the Operational Performance Information System (OPIS) which has been operated to improve the public understanding by the KINS (Korea Institute of Nuclear Safety), unintended trip events by mainly human errors counted up to 38 cases (18.7%) from 2000 to 2011. Although the Nuclear Power Plant (NPP) industry in Korea has been making efforts to reduce the human errors which have largely contributed to trip events, the human error rate might keep increasing. Interestingly, digital based I and C systems is the one of the reduction factors of unintended reactor trips. Human errors, however, have occurred due to the digital based I and C systems because those systems require new or changed behaviors to the NPP operators. Therefore, it is necessary that the investigations of human errors consider a new methodology to find not only tangible behavior but also intangible behavior such as organizational behaviors. In this study we investigated human errors to find latent factors such as decisions and conditions in the all of the unintended reactor trip events during last dozen years. To find them, we applied the HFACS (Human Factors Analysis and Classification System) which is a commonly utilized tool for investigating human contributions to aviation accidents under a widespread evaluation scheme. The objective of this study is to find latent factors behind of human errors in nuclear reactor trip events. Therefore, a method to investigate unintended trip events by human errors and the results will be discussed in more detail.

  12. Unveiling E-Bike Potential for Commuting Trips from GPS Traces

    Directory of Open Access Journals (Sweden)

    Angel J. Lopez

    2017-06-01

    Full Text Available Common goals of sustainable mobility approaches are to reduce the need for travel, to facilitate modal shifts, to decrease trip distances and to improve energy efficiency in the transportation systems. Among these issues, modal shift plays an important role for the adoption of vehicles with fewer or zero emissions. Nowadays, the electric bike (e-bike is becoming a valid alternative to cars in urban areas. However, to promote modal shift, a better understanding of the mobility behaviour of e-bike users is required. In this paper, we investigate the mobility habits of e-bikers using GPS data collected in Belgium from 2014 to 2015. By analysing more than 10,000 trips, we provide insights about e-bike trip features such as: distance, duration and speed. In addition, we offer a deep look into which routes are preferred by bike owners in terms of their physical characteristics and how weather influences e-bike usage. Results show that trips with higher travel distances are performed during working days and are correlated with higher average speeds. Usage patterns extracted from our data set also indicate that e-bikes are preferred for commuting (home-work and business (work related trips rather than for recreational trips.

  13. Investigations on human error hazards in recent unintended trip events of Korean nuclear power plants

    International Nuclear Information System (INIS)

    Kim, Sa Kil; Jang, Tong Il; Lee, Yong Hee; Shin, Kwang Hyeon

    2012-01-01

    According to the Operational Performance Information System (OPIS) which has been operated to improve the public understanding by the KINS (Korea Institute of Nuclear Safety), unintended trip events by mainly human errors counted up to 38 cases (18.7%) from 2000 to 2011. Although the Nuclear Power Plant (NPP) industry in Korea has been making efforts to reduce the human errors which have largely contributed to trip events, the human error rate might keep increasing. Interestingly, digital based I and C systems is the one of the reduction factors of unintended reactor trips. Human errors, however, have occurred due to the digital based I and C systems because those systems require new or changed behaviors to the NPP operators. Therefore, it is necessary that the investigations of human errors consider a new methodology to find not only tangible behavior but also intangible behavior such as organizational behaviors. In this study we investigated human errors to find latent factors such as decisions and conditions in the all of the unintended reactor trip events during last dozen years. To find them, we applied the HFACS (Human Factors Analysis and Classification System) which is a commonly utilized tool for investigating human contributions to aviation accidents under a widespread evaluation scheme. The objective of this study is to find latent factors behind of human errors in nuclear reactor trip events. Therefore, a method to investigate unintended trip events by human errors and the results will be discussed in more detail

  14. The trip status and the reduction countermeasure in Kori nuclear power plant unit 1 and 2

    International Nuclear Information System (INIS)

    Kim, Jung-Soo

    1991-01-01

    Nuclear power account for 36% of Korea's total electric capacity and provided over 50% of the net electric power supply by June 1991. These plants supply US with the cheapest and most stable electric supply available. However each units capacity is very large and a plant trip due to failure of a component or a human error has a great influence on the nations electric power supply and drastically decreases the reserve margin. This report will analyze the trip causes and measure the trip frequency from the first commercial operation of Kori unit 1 and 2 to the end of June 1991, reflect to the plant operation, management and facility modification, etc. This will minimize the number of trips or urgent power reductions and thus contribute to an increase in plant capacity factor and safety, and stabilize the electric power demand and supply. The safety and the economy of nuclear power plant have to be secured and raised respectably by increasing the capacity factor. Since the prevention of trips plays an important role in the plant safety and economy, we have to do our best to prevent the unexpected trip

  15. Using OpenTripPlanner to determine lowest cost home-work-home trips as an input to UrbanSim

    CSIR Research Space (South Africa)

    Waldeck, L

    2014-09-01

    Full Text Available for the provision of infrastructure and social facilities. The model is currently based on two open source projects, UrbanSim and Open Trip Planner. The paper describes the modifications that had to be introduced to apply the software in the South African context...

  16. Marine sediments monitoring studies for trace elements with the application of fast temperature programs and solid sampling high resolution continuum source atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Orani, Anna Maria; Han, Eunmi; Mandjukov, Petko; Vassileva, Emilia, E-mail: e.vasileva-veleva@iaea.org

    2015-01-01

    Analytical procedure for the determination of As, Cd, Cu, Ni, Co and Cr in marine sediment samples using high-resolution continuum source graphite furnace atomic absorption spectrometry (HR CS AAS) and direct solid sample analysis has been developed. The application of fast programs in combination with direct solid sampling allows to eliminate the drying and pretreatment steps, however makes impossible the use of liquid standards for calibration. Iridium treated platforms were applied throughout the present study. Calibration technique based on the use of solid certified reference materials (marine sediments) similar to the nature of the analyzed sample and statistics of regression analysis were applied to the real sediment samples. The instrumental parameters were optimized in order to obtain reproducible and interference free analytical signals. The ISO-17025 requirements and Eurachem guidelines were followed in the validation of the proposed analytical procedure. Accordingly, blanks, selectivity, calibration, linearity, working range, trueness, repeatability reproducibility, limits of detection and quantification and expanded uncertainty (k = 2) for all investigated elements were assessed. Two different approaches for the estimation of measurement uncertainty were applied and obtained results compared. The major contributors to the combined uncertainty of the analyte mass fraction were found to be the homogeneity of the samples and the microbalance precision. The influence of sample particle sizes on the total combined uncertainty was also evaluated. Traceability to SI system of units of the obtained by the proposed analytical procedure results was demonstrated. Additionally, validation of the methodology developed was effectuated by the comparison of the obtained results with independent method e.g. ICP-MS with external calibration. The use of solid sampling HR CS AAS for the determination of trace elements in marine sediment matrix gives significant advantages

  17. TRIP aided deformation of a near-Ni-free, Mn–N bearing duplex stainless steel

    International Nuclear Information System (INIS)

    Choi, Jeom Yong; Ji, Jung Hoon; Hwang, Si Woo; Park, Kyung-Tae

    2012-01-01

    Highlights: ► Development of a lean alloyed (near-Ni-free) TRIP aided duplex STS. ► In situ characterization of SIM transformation with strain at the same area of the sample. ► The KAM distribution evolution of the constituent phases with strain. - Abstract: A near-Ni-free, Mn–N bearing duplex stainless steel (D-SS) that shows transformation induced plasticity was developed. The present D-SS exhibited an excellent strength–ductility combination over 1000 MPa tensile strength and 50% elongation. An analysis of the element partitioning during annealing revealed that the stacking fault energy of austenite was low enough for a strain induced martensite (SIM) transformation to occur. The strain hardening rate began to increase at ∼10% strain with the same manner of SIM fraction. The TEM and EBSD analyses showed that not only the ε martensite band intersections but the austenite grain boundaries acted as the SIM nucleation sites. The SIM transformation was saturated because of the austenite grain refinement and the corresponding austenite stabilization. The austenite grain refinement was caused by the mutual impingement of growing SIM and as a result by the engulfment of remaining austenite by SIM. The deformation behavior of the present D-SS was characterized by analyzing the kernel average misorientation (KAM) of the constituent phases with strain. The KAM distribution of austenite, ferrite and SIM exhibited different characteristics. The average KAM of austenite and ferrite increased as the strain increased, but its increasing rate of austenite was higher than that of ferrite. These KAM characteristics were discussed along with the dislocation glide modes of austenite and ferrite. By contrast, the average KAM of SIM was insensitive to strain and higher than that of the other two phases.

  18. Factors affecting trip generation of motorcyclist for the purpose of non-mandatory activities

    Science.gov (United States)

    Anggraini, Renni; Sugiarto, Sugiarto; Pramanda, Heru

    2017-11-01

    The inadequate facilities and limited access to public transport reflect many people using private vehicles, in particular, motorcycle. The motorcycle is most widely used in Indonesia, recently, including Aceh Province. As a result, the number of motorcycle ownership is increasing significantly. The increasing number of motorcycles leads to complex traffic problems. Several factors tend to affect the trip generation of the motorcyclist, i.e., the social demographics of individuals and families, accessibility, etc. This study aims to analyze the characteristics of motorcyclists for non-mandatory activities, i.e. activities other than to work and school. It also aims to determine the dominant factors that affect their trips through trip generation models. The required data consist of primary data and secondary data. Primary data consists of a home interview survey that collects individual's daily trips. It is conducted by distributing the questionnaires to 400 families residing in Lhokseumawe City. Modeling the trip generation of the motorcyclist is done by multiple linear regression analysis. Parameters calibration uses OLS (Ordinary Least Square) method. The results showed that the dominant variables that affect the trip generation of motorcyclist for non-mandatory activities are license ownership, housewife, school-age children, middle-income household, and lower education level. It can be concluded that some factors affecting trip generation to non-work activities were female motorcyclists from the middle-income household with lower education level. As their status is mostly as the housewife, escorting children to non-school activities seems to the mother's task, instead of the father. It is clear that, most female ride motorcycle for doing household tasks. However, it should be noted that the use of the motorcycle in long-term does not suit for sustainable transportation.

  19. Grand Canyon as a universally accessible virtual field trip for intro Geoscience classes using geo-referenced mobile game technology

    Science.gov (United States)

    Bursztyn, N.; Pederson, J. L.; Shelton, B.

    2012-12-01

    There is a well-documented and nationally reported trend of declining interest, poor preparedness, and lack of diversity within U.S. students pursuing geoscience and other STEM disciplines. We suggest that a primary contributing factor to this problem is that introductory geoscience courses simply fail to inspire (i.e. they are boring). Our experience leads us to believe that the hands-on, contextualized learning of field excursions are often the most impactful component of lower division geoscience classes. However, field trips are becoming increasingly more difficult to run due to logistics and liability, high-enrollments, decreasing financial and administrative support, and exclusivity of the physically disabled. Recent research suggests that virtual field trips can be used to simulate this contextualized physical learning through the use of mobile devices - technology that exists in most students' hands already. Our overarching goal is to enhance interest in introductory geoscience courses by providing the kinetic and physical learning experience of field trips through geo-referenced educational mobile games and test the hypothesis that these experiences can be effectively simulated through virtual field trips. We are doing this by developing "serious" games for mobile devices that deliver introductory geology material in a fun and interactive manner. Our new teaching strategy will enhance undergraduate student learning in the geosciences, be accessible to students of diverse backgrounds and physical abilities, and be easily incorporated into higher education programs and curricula at institutions globally. Our prototype involves students virtually navigating downstream along a scaled down Colorado River through Grand Canyon - physically moving around their campus quad, football field or other real location, using their smart phone or a tablet. As students reach the next designated location, a photo or video in Grand Canyon appears along with a geological

  20. ‘tripleint_cc’: A program for 2-centre variational leptonic Coulomb potential matrix elements using Hylleraas-type trial functions, with a performance optimization study

    Science.gov (United States)

    Plummer, M.; Armour, E. A. G.; Todd, A. C.; Franklin, C. P.; Cooper, J. N.

    2009-12-01

    We present a program used to calculate intricate three-particle integrals for variational calculations of solutions to the leptonic Schrödinger equation with two nuclear centres in which inter-leptonic distances (electron-electron and positron-electron) are included directly in the trial functions. The program has been used so far in calculations of He-H¯ interactions and positron H 2 scattering, however the precisely defined integrals are applicable to other situations. We include a summary discussion of how the program has been optimized from a 'legacy'-type code to a more modern high-performance code with a performance improvement factor of up to 1000. Program summaryProgram title: tripleint.cc Catalogue identifier: AEEV_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEEV_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 12 829 No. of bytes in distributed program, including test data, etc.: 91 798 Distribution format: tar.gz Programming language: Fortran 95 (fixed format) Computer: Modern PC (tested on AMD processor) [1], IBM Power5 [2] Cray XT4 [3], similar Operating system: Red Hat Linux [1], IBM AIX [2], UNICOS [3] Has the code been vectorized or parallelized?: Serial (multi-core shared memory may be needed for some large jobs) RAM: Dependent on parameter sizes and option to use intermediate I/O. Estimates for practical use: 0.5-2 GBytes (with intermediate I/O); 1-4 GBytes (all-memory: the preferred option). Classification: 2.4, 2.6, 2.7, 2.9, 16.5, 16.10, 20 Nature of problem: The 'tripleint.cc' code evaluates three-particle integrals needed in certain variational (in particular: Rayleigh-Ritz and generalized-Kohn) matrix elements for solution of the Schrödinger equation with two fixed centres (the solutions may then be used in subsequent dynamic

  1. Development of TRIP-Aided Lean Duplex Stainless Steel by Twin-Roll Strip Casting and Its Deformation Mechanism

    Science.gov (United States)

    Zhao, Yan; Zhang, Weina; Liu, Xin; Liu, Zhenyu; Wang, Guodong

    2016-12-01

    In the present work, twin-roll strip casting was carried out to fabricate thin strip of a Mn-N alloyed lean duplex stainless steel with the composition of Fe-19Cr-6Mn-0.4N, in which internal pore defects had been effectively avoided as compared to conventional cast ingots. The solidification structure observed by optical microscope indicated that fine Widmannstatten structure and coarse-equiaxed crystals had been formed in the surface and center, respectively, with no columnar crystal structures through the surface to center of the cast strip. By applying hot rolling and cold rolling, thin sheets with the thickness of 0.5 mm were fabricated from the cast strips, and no edge cracks were formed during the rolling processes. With an annealing treatment at 1323 K (1050 °C) for 5 minutes after cold rolling, the volume fractions of ferrite and austenite were measured to be approximately equal, and the distribution of alloying elements in the strip was further homogenized. The cold-rolled and annealed sheet exhibited an excellent combination of strength and ductility, with the ultimate tensile strength and elongation having been measured to be 1000 MPa and 65 pct, respectively. The microstructural evolution during deformation was investigated by XRD, EBSD, and TEM, indicating that ferrite and austenite had different deformation mechanisms. The deformation of ferrite phase was dominated by dislocation slipping, and the deformation of austenite phase was mainly controlled by martensitic transformation in the sequence of γ→ ɛ-martensite→ α'-martensite, leading to the improvement of strength and plasticity by the so-called transformation-induced plasticity (TRIP) effect. By contrast, lean duplex stainless steels of Fe-21Cr-6Mn-0.5N and Fe-23Cr-7Mn-0.6N fabricated by twin-roll strip casting did not show TRIP effects and exhibited lower strength and elongation as compared to Fe-19Cr-6Mn-0.4N.

  2. Design and Optimization of an Austenitic TRIP Steel for Blast and Fragment Protection

    Science.gov (United States)

    Feinberg, Zechariah Daniel

    In light of the pervasive nature of terrorist attacks, there is a pressing need for the design and optimization of next generation materials for blast and fragment protection applications. Sadhukhan used computational tools and a systems-based approach to design TRIP-120---a fully austenitic transformation-induced plasticity (TRIP) steel. Current work more completely evaluates the mechanical properties of the prototype, optimizes the processing for high performance in tension and shear, and builds models for more predictive power of the mechanical behavior and austenite stability. Under quasi-static and dynamic tension and shear, the design exhibits high strength and high uniform ductility as a result of a strain hardening effect that arises with martensitic transformation. Significantly more martensitic transformation occurred under quasi-static loading conditions (69% in tension and 52% in shear) compared to dynamic loading conditions (13% tension and 5% in shear). Nonetheless, significant transformation occurs at high-strain rates which increases strain hardening, delays the onset of necking instability, and increases total energy absorption under adiabatic conditions. Although TRIP-120 effectively utilizes a TRIP effect to delay necking instability, a common trend of abrupt failure with limited fracture ductility was observed in tension and shear at all strain rates. Further characterization of the structure of TRIP-120 showed that an undesired grain boundary cellular reaction (η phase formation) consumed the fine dispersion of the metastable gamma' phase and limited the fracture ductility. A warm working procedure was added to the processing of TRIP-120 in order to eliminate the grain boundary cellular reaction from the structure. By eliminating η formation at the grain boundaries, warm-worked TRIP-120 exhibits a drastic improvement in the mechanical properties in tension and shear. In quasi-static tension, the optimized warm-worked TRIP-120 with an Mssigma

  3. The X-Ray Pebble Recirculation Experiment (X-PREX): Facility Description, Preliminary Discrete Element Method Simulation Validation Studies, and Future Test Program

    International Nuclear Information System (INIS)

    Laufer, Michael R.; Bickel, Jeffrey E.; Buster, Grant C.; Krumwiede, David L.; Peterson, Per F.

    2014-01-01

    This paper presents a facility description, preliminary results, and future test program of the new X-Ray Pebble Recirculation Experiment (X-PREX), which is now operational and being used to collect data on the behavior of slow dense granular flows relevant to pebble bed reactor core designs. The X-PREX facility uses digital x-ray tomography methods to track both the translational and rotational motion of spherical pebbles, which provides unique experimental results that can be used to validate discrete element method (DEM) simulations of pebble motion. The validation effort supported by the X-PREX facility provides a means to build confidence in analysis of pebble bed configuration and residence time distributions that impact the neutronics, thermal hydraulics, and safety analysis of pebble bed reactor cores. Preliminary experimental and DEM simulation results are reported for silo drainage, a classical problem in the granular flow literature, at several hopper angles. These studies include conventional converging and novel diverging geometries that provide additional flexibility in the design of pebble bed reactor cores. Excellent agreement is found between the X-PREX experimental and DEM simulation results. Finally, this paper discusses additional studies in progress relevant to the design and analysis of pebble bed reactor cores including pebble recirculation in cylindrical core geometries and evaluation of forces on shut down blades inserted directly into a packed pebble bed. (author)

  4. Concentrations of elements in fish fillets, fish muscle plugs, and crayfish from the 2011 Missouri Department of Conservation general contaminant monitoring program

    Science.gov (United States)

    May, Thomas W.; Walther, Michael J.; Brumbaugh, William G.; McKee, Michael J.

    2013-01-01

    This report presents the results of a contaminant monitoring survey conducted annually by the Missouri Department of Conservation to examine the levels of selected elemental contaminants in fish fillets, fish muscle plugs, and crayfish. Fillet samples of yellow bullhead (Ameiurus natalis), golden redhorse (Moxostoma erythrurum), longear sunfish (Lepomis megalotis), and channel catfish (Ictalurus punctatus) were collected from six sites as part of the Missouri Department of Conservation’s Fish Contaminant Monitoring Program. Fish dorsal muscle plugs were collected from largemouth bass (Micropterus salmoides) at eight of the sites, and crayfish from two sites. Following preparation and analysis of the samples, highlights of the data were as follows: cadmium and lead residues were most elevated in crayfish tissue samples from the Big River at Cherokee Landing, with 1 to 8 micrograms per gram dry weight and 22 to 45 micrograms per gram dry weight, respectively. Some dorsal muscle plugs from largemouth bass collected from Clearwater Lake, Lake St. Louis, Noblett Lake, Hazel Creek Lake, and Harrison County Lake contained mercury residues (1.7 to 4.7 micrograms per gram dry weight) that exceeded the U.S. Environmental Protection Agency Water Quality Criterion of 1.5 micrograms per gram dry weight of fish tissue (equivalent to 0.30 micrograms per gram wet weight).

  5. Power Trip Set-points of Reactor Protection System for New Research Reactor

    International Nuclear Information System (INIS)

    Lee, Byeonghee; Yang, Soohyung

    2013-01-01

    This paper deals with the trip set-point related to the reactor power considering the reactivity induced accident (RIA) of new research reactor. The possible scenarios of reactivity induced accidents were simulated and the effects of trip set-point on the critical heat flux ratio (CHFR) were calculated. The proper trip set-points which meet the acceptance criterion and guarantee sufficient margins from normal operation were then determined. The three different trip set-points related to the reactor power are determined based on the RIA of new research reactor during FP condition, over 0.1%FP and under 0.1%FP. Under various reactivity insertion rates, the CHFR are calculated and checked whether they meet the acceptance criterion. For RIA at FP condition, the acceptance criterion can be satisfied even if high power set-point is only used for reactor trip. Since the design of the reactor is still progressing and need a safety margin for possible design changes, 18 MW is recommended as a high power set-point. For RIA at 0.1%FP, high power setpoint of 18 MW and high log rate of 10%pp/s works well and acceptance criterion is satisfied. For under 0.1% FP operations, the application of high log rate is necessary for satisfying the acceptance criterion. Considering possible decrease of CHFR margin due to design changes, the high log rate is suggested to be 8%pp/s. Suggested trip set-points have been identified based on preliminary design data for new research reactor; therefore, these trip set-points will be re-established by considering design progress of the reactor. The reactor protection system (RPS) of new research reactor is designed for safe shutdown of the reactor and preventing the release of radioactive material to environment. The trip set point of RPS is essential for reactor safety, therefore should be determined to mitigate the consequences from accidents. At the same time, the trip set-point should secure margins from normal operational condition to avoid

  6. Seismic damage sensing of bridge structures with TRIP reinforcement steel bars

    Science.gov (United States)

    Adachi, Yukio; Unjoh, Shigeki

    2001-07-01

    Intelligent reinforced concrete structures with transformation-induced-plasticity (TRIP) steel rebars that have self-diagnosis function are proposed. TRIP steel is special steel with Fe-Cr based formulation. It undergoes a permanent change in crystal structure in proportion to peak strain. This changes from non-magnetic to magnetic steel. By using the TRIP steel rebars, the seismic damage level of reinforced concrete structures can be easily recognized by measuring the residual magnetic level of the TRIP rebars, that is directly related to the peak strain during a seismic event. This information will be most helpful for repairing the damaged structures. In this paper, the feasibility of the proposed intelligent reinforced concrete structure for seismic damage sensing is experimentally studied. The relation among the damage level, peak strain of rebars, and residual magnetic level of rebars of reinforced concrete beams implemented with TRIP steel bars was experimentally studied. As the result of this study, this intelligent structure can diagnose accumulated strain/damage anticipated during seismic event.

  7. Additive Benefits of Twice Forest Bathing Trips in Elderly Patients with Chronic Heart Failure.

    Science.gov (United States)

    Mao, Gen Xiang; Cao, Yong Bao; Yang, Yan; Chen, Zhuo Mei; Dong, Jian Hua; Chen, Sha Sha; Wu, Qing; Lyu, Xiao Ling; Jia, Bing Bing; Yan, Jing; Wang, Guo Fu

    2018-02-01

    Chronic heart failure (CHF), a clinical syndrome resulting from the consequences of various cardiovascular diseases (CVDs), is increasingly becoming a global cause of morbidity and mortality. We had earlier demonstrated that a 4-day forest bathing trip can provide an adjunctive therapeutic influence on patients with CHF. To further investigate the duration of the impact and the optimal frequency of forest bathing trips in patients with CHF, we recruited those subjects who had experienced the first forest bathing trip again after 4 weeks and randomly categorized them into two groups, namely, the urban control group (city) and the forest bathing group (forest). After a second 4-day forest bathing trip, we observed a steady decline in the brain natriuretic peptide levels, a biomarker of heart failure, and an attenuated inflammatory response as well as oxidative stress. Thus, this exploratory study demonstrated the additive benefits of twice forest bathing trips in elderly patients with CHF, which could further pave the way for analyzing the effects of such interventions in CVDs. Copyright © 2018 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

  8. Methods for analysis of passenger trip performance in a complex networked transportation system

    Science.gov (United States)

    Wang, Danyi

    2007-12-01

    The purpose of the Air Transportation System (ATS) is to provide safe and efficient transportation service of passengers and cargo. The on-time performance of a passenger's trip is a critical performance measurement of the Quality of Service (QOS) provided by any Air Transportation System. QOS has been correlated with airline profitability, productivity, customer loyalty and customer satisfaction (Heskett et al. 1994). Btatu and Barnhart have shown that official government and airline on-time performance metrics (i.e. flight-centric measures of air transportation) fail to accurately reflect the passenger experience (Btatu and Barnhart, 2005). Flight-based metrics do not include the trip delays accrued by passengers who were re-booked due to cancelled flights or missed connections. Also, flight-based metrics do not quantify the magnitude of the delay (only the likelihood) and thus fails to provide the consumer with a useful assessment of the impact of a delay. Passenger-centric metrics have not been developed because of the unavailability of airline proprietary data, which is also protected by anti-trust collusion concerns and civil liberty privacy restrictions. Moveover, the growth of the ATS is trending out of the historical range. The objectives of this research were to (1) estimate ATS-wide passenger trip delay using publicly accessible flight data, and (2) investigate passenger trip dynamics out of the range of historical data by building a passenger flow simulation model to predict impact on passenger trip time given anticipated changes in the future. The first objective enables researchers to conduct historical analysis on passenger on-time performance without proprietary itinerary data, and the second objective enables researchers to conduct experiments outside the range of historic data. The estimated passenger trip delay was for 1,030 routes between the 35 busiest airports in the United States in 2006. The major findings of this research are listed as

  9. Effects of RCP trip when recovering HPSI during LOCA in a Westinghouse PWR

    Energy Technology Data Exchange (ETDEWEB)

    Montero-Mayorga, Javier, E-mail: fj.montero@alumnos.upm.es; Queral, César; Rivas-Lewicky, Julio; González-Cadelo, Juan

    2014-12-15

    Highlights: • If HPSI is recovered during SBLOCA and RCPs are tripped core damage can be reached. • If the RCPs are tripped once the accumulators have injected the damage can be avoided. • If only 2 out of 3 RCPs are tripped the damage can be also avoided. • Improvements are proposed to the EOPs in order to avoid possible damage. - Abstract: Current Westinghouse Emergency Operating Procedures (EOPs) indicate initially that the operator must keep the reactor coolant pumps (RCPs) running during a Small Break Loss of Coolant Accident (SBLOCA) if there is unavailability of high pressure safety injection (HPSI) system in order to cool the core by forced convection. However, the crew must follow different EOPs along the transient depending on its evolution. In these EOPs there are several conditions which indicate the necessity of tripping one or more RCPs when HPSI is recovered. In this paper the occurrence of a SBLOCA with unavailability of HPSI has been analyzed with a model of Almaraz Nuclear Power Plant (Westinghouse 3 Loop) for TRACE code V5.0 patch 1. Two different approaches have been considered: the first one, taking into account Optimal Recovery Guidelines (ORGs) and in the second approach, the transition to Function Restoration Guidelines (FRGs) due to inadequate core cooling (ICC) conditions is considered. Results of this paper lead to the implementation of an improvement in current EOPs regarding how many RCPs should be tripped during SBLOCA sequences.

  10. Field trip method as an effort to reveal student environmental literacy on biodiversity issue and context

    Science.gov (United States)

    Rijal, M.; Saefudin; Amprasto

    2018-05-01

    Field trip method through investigation of local biodiversity cases can give educational experiences for students. This learning activity was efforts to reveal students environmental literacy on biodiversity. The aim of study were (1) to describe the activities of students get information about the biodiversity issue and its context through field trip, (2) to describe the students findings during field trip, and (3) to reveal students environmental literacy based on pre test and post test. The research method used weak-experiment and involved 34 participants at senior high school students in Bandung-Indonesia. The research instruments for collecting data were environmental literacy test, observation sheets and questionnaire sheets for students. The analysis of data was quantitative descriptive. The results show that more than 79% of the students gave positive view for each field trip activity, i.e students activity during work (97%-100%); students activity during gather information (79%- 100%); students activity during exchange information with friend (82%-100%); and students interested to Biodiversity after field trip activity (85%-100%). Students gain knowledge about the diversity of animal vertebrate and its characteristics, the status and condition of animals, and the source of animal with the cases of animal diversity. The students environmental literacy tends to be moderate level based on test. Meanwhile, the average of the attitudes and action greater than the components of knowledge and cognitive skills.

  11. TRIP13 is a protein-remodeling AAA+ ATPase that catalyzes MAD2 conformation switching.

    Science.gov (United States)

    Ye, Qiaozhen; Rosenberg, Scott C; Moeller, Arne; Speir, Jeffrey A; Su, Tiffany Y; Corbett, Kevin D

    2015-04-28

    The AAA+ family ATPase TRIP13 is a key regulator of meiotic recombination and the spindle assembly checkpoint, acting on signaling proteins of the conserved HORMA domain family. Here we present the structure of the Caenorhabditis elegans TRIP13 ortholog PCH-2, revealing a new family of AAA+ ATPase protein remodelers. PCH-2 possesses a substrate-recognition domain related to those of the protein remodelers NSF and p97, while its overall hexameric architecture and likely structural mechanism bear close similarities to the bacterial protein unfoldase ClpX. We find that TRIP13, aided by the adapter protein p31(comet), converts the HORMA-family spindle checkpoint protein MAD2 from a signaling-active 'closed' conformer to an inactive 'open' conformer. We propose that TRIP13 and p31(comet) collaborate to inactivate the spindle assembly checkpoint through MAD2 conformational conversion and disassembly of mitotic checkpoint complexes. A parallel HORMA protein disassembly activity likely underlies TRIP13's critical regulatory functions in meiotic chromosome structure and recombination.

  12. TRIP13 is a protein-remodeling AAA+ ATPase that catalyzes MAD2 conformation switching

    Energy Technology Data Exchange (ETDEWEB)

    Ye, Qiaozhen [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Rosenberg, Scott C. [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Moeller, Arne [National Resource for Automated Molecular Microscopy, Department of Integrative Structural and Computational Biology, The Scripps Research Institute, La Jolla, United States; Speir, Jeffrey A. [National Resource for Automated Molecular Microscopy, Department of Integrative Structural and Computational Biology, The Scripps Research Institute, La Jolla, United States; Su, Tiffany Y. [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Corbett, Kevin D. [Ludwig Institute for Cancer Research, San Diego Branch, La Jolla, United States; Department of Cellular and Molecular Medicine, University of California, San Diego, La Jolla, United States

    2015-04-28

    The AAA+ family ATPase TRIP13 is a key regulator of meiotic recombination and the spindle assembly checkpoint, acting on signaling proteins of the conserved HORMA domain family. Here we present the structure of the Caenorhabditis elegans TRIP13 ortholog PCH-2, revealing a new family of AAA+ ATPase protein remodelers. PCH-2 possesses a substrate-recognition domain related to those of the protein remodelers NSF and p97, while its overall hexameric architecture and likely structural mechanism bear close similarities to the bacterial protein unfoldase ClpX. We find that TRIP13, aided by the adapter protein p31(comet), converts the HORMA-family spindle checkpoint protein MAD2 from a signaling-active ‘closed’ conformer to an inactive ‘open’ conformer. We propose that TRIP13 and p31(comet) collaborate to inactivate the spindle assembly checkpoint through MAD2 conformational conversion and disassembly of mitotic checkpoint complexes. A parallel HORMA protein disassembly activity likely underlies TRIP13's critical regulatory functions in meiotic chromosome structure and recombination.

  13. Modulation of thalamocortical oscillations by TRIP8b, an auxiliary subunit for HCN channels.

    Science.gov (United States)

    Zobeiri, Mehrnoush; Chaudhary, Rahul; Datunashvili, Maia; Heuermann, Robert J; Lüttjohann, Annika; Narayanan, Venu; Balfanz, Sabine; Meuth, Patrick; Chetkovich, Dane M; Pape, Hans-Christian; Baumann, Arnd; van Luijtelaar, Gilles; Budde, Thomas

    2018-04-01

    Hyperpolarization-activated cyclic nucleotide-gated cation (HCN) channels have important functions in controlling neuronal excitability and generating rhythmic oscillatory activity. The role of tetratricopeptide repeat-containing Rab8b-interacting protein (TRIP8b) in regulation of hyperpolarization-activated inward current, I h , in the thalamocortical system and its functional relevance for the physiological thalamocortical oscillations were investigated. A significant decrease in I h current density, in both thalamocortical relay (TC) and cortical pyramidal neurons was found in TRIP8b-deficient mice (TRIP8b -/- ). In addition basal cAMP levels in the brain were found to be decreased while the availability of the fast transient A-type K + current, I A , in TC neurons was increased. These changes were associated with alterations in intrinsic properties and firing patterns of TC neurons, as well as intrathalamic and thalamocortical network oscillations, revealing a significant increase in slow oscillations in the delta frequency range (0.5-4 Hz) during episodes of active-wakefulness. In addition, absence of TRIP8b suppresses the normal desynchronization response of the EEG during the switch from slow-wave sleep to wakefulness. It is concluded that TRIP8b is necessary for the modulation of physiological thalamocortical oscillations due to its direct effect on HCN channel expression in thalamus and cortex and that mechanisms related to reduced cAMP signaling may contribute to the present findings.

  14. Report on safety related occurrences and reactor trips July 1, 1979 - December 31, 1979

    International Nuclear Information System (INIS)

    Olsson, S.; Andermo, L.

    1980-01-01

    This is a report on all reported safety related occurrences and reactor trips in Swedish nuclear power plants in operation during July 1 to December 31, 1979 inclusive. The facilities involved are Barsebaeck 1 and 2, Oskarshamn 1 and 2 and Ringhals 1 and 2. During this period of 6 months 76 safety related occurrences and 27 reactor trips have been reported to the Nuclear Power Inspectorate. It is to the greatest extent conventional components such as valves and pumps which bring about the safety related occurrences or occurrences leading to outages or power reductions. However, the component errors discovered in the safety related systems have not affected the function of their redundant system and other diverse systems have not been involved. Therefore the reactor safety has been satisfactory. The total number of reactor trips are normal. The average value for these 6 months is 4.5 trips/unit. Approximetely one half of the reactor trips happened at zero or very low power operation. The fact that even small deviations from prescribed operation result in an automatic and safe shut down of the reactor, does not always imply a conflict with operational availability. The greatest outages are caused by occurrences without safety significance. (author)

  15. Numerical study on effect of boundary layer trips on aerodynamic performance of E216 airfoil

    Directory of Open Access Journals (Sweden)

    B.K. Sreejith

    2018-02-01

    Full Text Available Simulation is carried out to find the performance of airfoil E216 using Transition γ-Reθ model at Reynolds number of 100,000. Flow behaviour and effect of angle of attack (AOA on laminar separation bubble (LSB formation are examined. The results are validated with wind tunnel experimental results. LSB formation is clearly spotted in the velocity vector plot and coefficient of pressure distribution over airfoil. LSB moved upstream towards the leading edge with increase in AOA. Effect of boundary layer trip on LSB formation over the airfoil and performance of airfoil are studied. Two different trip locations, 17% of chord and 10% of chord from leading edge, and different trip heights (0.3 mm, 0.5 mm, 0.7 mm, 1 mm are investigated in this study. Results showed that boundary layer trip could eliminate LSB partially or completely and improve aerodynamic performance of the airfoil. Maximum improvement in drag by 15.48% and lift to drag ratio by 21.62% are obtained at angle of attack of 60. In all the cases, improvement in performance is observed only up to trip height of 0.5 mm.

  16. THE TRIPS AGREEMENT, INTERNATIONAL TECHNOLOGY TRANSFER AND DEVELOPMENT: SOME LESSONS FROM STRENGTHENING IPR PROTECTION

    Directory of Open Access Journals (Sweden)

    M. Shugurov

    2016-01-01

    Full Text Available The article focuses on the impact of the TRIPS Agreement provisions on further development of international technology transfer (ITT mainly to developing countries. The authors review the critical specificity of ITT connected with the adoption of TRIPS. Much attention is paid to an analysis of what is most discussed among international experts in the area of the issues on the dual results of stronger intellectual property rights (IPRs concerning various groups of developing countries. Their study also examines a number of problems with implementation of the TRIPS provisions, conducive to ITT, in the context of the TRIPS-plus era as a new stage in strengthening IPR protection. Bearing in mind the fragmentation of the international regime of IPR protection because of the adoption of numerous regional free trade agreements, the authors outline the possible position of advanced developing and least developed countries with respect to using TRIPS potentials for development of ITT under reasonable and just terms, with the aim of overall prosperity.

  17. Development of a cause analysis system for a CPCS trip by using the rule-base deduction method.

    Science.gov (United States)

    Park, Je-Yun; Koo, In-Soo; Sohn, Chang-Ho; Kim, Jung-Seon; Cho, Gi-Ho; Park, Hee-Seok

    2009-07-01

    A Core Protection Calculator System (CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by a Combustion Engineering Company. The major function of the Core Protection Calculator System is to generate contact outputs for the Departure from Nucleate Boiling Ratio (DNBR) Trip and a Local Power Density (LPD) Trip. But in a Core Protection Calculator System, a trip cause cannot be identified, thus only trip signals are transferred to the Plant Protection System (PPS) and only the trip status is displayed. It could take a considerable amount of time and effort for a plant operator to analyze the trip causes of a Core Protection Calculator System. So, a Cause Analysis System for a Core Protection Calculator System (CASCPCS) has been developed by using the rule-base deduction method to assist operators in a Nuclear Power Plant. CASCPCS consists of three major parts. Inference engine has a role of controlling the searching knowledge base, executing the rules and tracking the inference process by using the depth-first searching method. Knowledge base consists of four major parts: rules, data base constants, trip buffer variables and causes. And a user interface is implemented by using menu-driven and window display techniques. The advantage of CASCPCS is that it saves time and effort to diagnose the trip causes of a Core Protection Calculator System, it increases a plant's availability and reliability, and it makes it easy to manage CASCPCS because of using only a cursor control.

  18. Benefits of multi day dog sledding trip for inexperienced participants

    OpenAIRE

    Hejna, Zdenek

    2014-01-01

    Masteroppgave - Norges idrettshøgskole, 2014 This work investigates tourism based dog-sledding, and poses two questions: is there an educative element to this activity? And, if so, is there something particular about this activity that makes it more suitable for educative experiences? The first premise is accepted as valid, and a working definition for educative experiences is provided. Dogsledding is established as a liminal sport, that although increasingly competitive, is ...

  19. Round-Trip System Available to Measure Path Length Variation in Korea VLBI System for Geodesy

    Science.gov (United States)

    Oh, Hongjong; Kondo, Tetsuro; Lee, Jinoo; Kim, Tuhwan; Kim, Myungho; Kim, Suchul; Park, Jinsik; Ju, Hyunhee

    2010-01-01

    The construction project of Korea Geodetic VLBI officially started in October 2008. The construction of all systems will be completed by the end of 2011. The project was named Korea VLBI system for Geodesy (KVG), and its main purpose is to maintain the Korea Geodetic Datum. In case of the KVG system, an observation room with an H-maser frequency standard is located in a building separated from the antenna by several tens of meters. Therefore KVG system will adopt a so-called round-trip system to transmit reference signals to the antenna with reduction of the effect of path length variations. KVG s round-trip system is designed not only to use either metal or optical fiber cables, but also to measure path length variations directly. We present this unique round trip system for KVG.

  20. Flow protection trip limits operational charge-discharge facility -- C Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Van Wormer, F.W.

    1958-09-19

    Because of wide variations in the venturi throat pressure, well beyond the panellit gage trip range, that occur during the sequence of operational charge-discharge, the panellit gage cannot be included in the scram safety circuit during the period of time that charge- discharge operations are being performed. In its stead, the function of the panellit gage is replaced in an overlapping manner by a tube inlet pressure monitor that is equipped with high and low pressure trip mechanisms that may be included in the scram safety circuit during the time that the panellit gage must be by-passed. The tube inlet pressure monitor is then used to provide the protection from unstable flow that is normally obtained with the panellit gage. This memorandum describes the manner in which the tube inlet pressure monitor trip points are to be determined and used.