WorldWideScience

Sample records for element development committee

  1. 77 FR 42298 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-07-18

    ... Biomass Research and Development Technical Advisory Committee (Technical Advisory Committee). DATES: The... 9008(d) established the Biomass Research and Development Technical Advisory Committee and lays forth... nomination. Appointments to the Biomass Research and Development Technical Advisory Committee will be made by...

  2. 77 FR 20377 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-04-04

    ... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Office of Energy Efficiency and Renewable Energy, Department...

  3. 78 FR 64932 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-10-30

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee under Section... Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral...

  4. 76 FR 36102 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-06-21

    ... vacancies on the Biomass Research and Development Technical Advisory Committee (Technical Advisory Committee..., 2008, H.R. 6124]. FCEA section 9008(d) establishes the Biomass Research and Development Technical... committee are ineligible for nomination. Appointments to the Biomass Research and Development Technical...

  5. 77 FR 64970 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-10-24

    ... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... observe the business of the Biomass Research and Development Technical Advisory Committee. To attend the... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and...

  6. SUSTAINABLE DEVELOPMENT MULTIDISCIPLINARY COMMITTEE OF SAN MIGUEL ALMAYA

    Directory of Open Access Journals (Sweden)

    Carolina Mejía-Madero

    2013-04-01

    Full Text Available In this article it is analyzed the role of the “Sustainable Development Multidisciplinary Committee of San Miguel Almaya” created in this community with an otomi background in the State of Mexico, with the purpose to continue with the touristic acts supported in 2006 by the Federal and State Secretaries of Tourism. All with the aim to get benefit from its potential, centered on a lagoon and an extinct volcano. The Committee was created in 2010 because an Eco Tourist Park wanted to be constructed; Even though two stages of the eco tourist park were constructed, it was not concluded; in order to give it continuity, the local authorities decided to negotiate resources. The purpose of the present document is to analyze through the Public Policy Networks the role its members played at the moment of taking decisions to determine if they created the necessary conditions to promote the tourist and the sustainability of the community. The study was based on the methodology of Cruz (2008 and Zabaleta (2006 which identifies the objectives, interests, resources, capabilities, limitations and attributions, between the elements that have an influence on establishing links; in this case, among the actors of the network formed inside the committee. The information was obtained from an empiric and documental investigation that included reunions with the local authorities. One of the most important results is that, the decisions taken within the committee and the exclusion of some of the actors stopped the sustainable development due to a lack of negotiation between its members and differences in their objectives and interests, resulting in a lack of compromise and cooperation to solve the normative, economic, ecologic and cultural problems of the community that could put into risk the touristic potential of the zone.

  7. 78 FR 16357 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-03-14

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development... hereby given of a meeting of the FAA Research, Engineering and Development (R,E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: April 24--8:30 a.m. to 4...

  8. 78 FR 46331 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-07-31

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy.... Appointments to the Biomass Research and Development Technical Advisory Committee will be made by the Secretary... Energy is soliciting nominations for candidates to fill vacancies on the Biomass Research and Development...

  9. 75 FR 56525 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-09-16

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... business of the Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or...

  10. 77 FR 6791 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-02-09

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee. The Federal... leading to the production of biobased fuels and biobased products. Tentative Agenda Update on USDA Biomass...

  11. 77 FR 26276 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-05-03

    ... business of the Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  12. 78 FR 44105 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-07-23

    ... Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral statements... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  13. 78 FR 29125 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-05-17

    ... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... public are welcome to observe the business of the Biomass Research and Development Technical Advisory... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and...

  14. 76 FR 63614 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-10-13

    ... Biomass Research and Development Technical Advisory Committee. To attend the meeting and/or to make oral... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION...

  15. 75 FR 74026 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-11-30

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... participation. This notice announces the meeting of the Biomass Research and Development Technical Advisory...

  16. Fuel element database: developer handbook

    International Nuclear Information System (INIS)

    Dragicevic, M.

    2004-09-01

    The fuel elements database which was developed for Atomic Institute of the Austrian Universities is described. The software uses standards like HTML, PHP and SQL. For the standard installation freely available software packages such as MySQL database or the PHP interpreter from Apache Software Foundation and Java Script were used. (nevyjel)

  17. 78 FR 8500 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2013-02-06

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... fuels and biobased products. Tentative Agenda: Agenda will include the following: Update on USDA Biomass...

  18. Committees and Conflict: Developing a Conflict Resolution Framework.

    Science.gov (United States)

    Spaulding, Angela

    2002-01-01

    Describes development of conflict-resolution framework to address committee conflict. Describes several conflict-resolution strategies. Matches appropriate strategies with different types of committee conflict. For example, compromise is listed at the appropriate strategy to resolve interpersonal conflict. (Contains 24 references.) (PKP)

  19. Fast breeder fuel element development

    International Nuclear Information System (INIS)

    Marth, W.; Muehling, G.

    1983-08-01

    This report is a compilation of the papers which have been presented during a seminar ''Fast Breeder Fuel Element Development'' held on November 15/16, 1982 at KfK. The papers give a survey of the status, of the obtained results and of the necessary work, which still has to be done in the frame of various development programmes for fast breeder fuel elements. In detail the following items were covered by the presentations: - the requirements and boundary conditions for the design of fuel pins and elements both for the reference concept of the SNR 300 core and for the large, commercial breeder type of the future (presentation 1,2 and 6); - the fabrication, properties and characterization of various mixed oxide fuel types (presentations 3,4 and 5); - the operational fuel pin behaviour, limits of different design concepts and possible mechanism for fuel pin failures (presentations (7 and 8); - the situation of cladding- and wrapper materials development especially with respect to the high burn-up values of commercial reactors (presentations 9 and 10); - the results of the irradiation experiments performed under steady-state and non-stationary operational conditions and with failed fuel pins (presentations 11, 12, 13 and 14). (orig./RW) [de

  20. 77 FR 14462 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2012-03-09

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development.... Name: Research, Engineering & Development Advisory Committee. Time and Date: April 18, 2012--9:30 a.m...

  1. 77 FR 54648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2012-09-05

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. TIME AND DATE: September 26, 2012--9 a.m. to 4 p.m...

  2. 76 FR 12404 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-03-07

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. Time and Date: April 20, 2011--9:30 a.m. to 4 p.m...

  3. 75 FR 14243 - Research, Engineering And Development Advisory Committee

    Science.gov (United States)

    2010-03-24

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering And Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development...: Research, Engineering & Development Advisory Committee. Time and Date: April 21, 2010--9 a.m. to 5 p.m...

  4. 76 FR 44648 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2011-07-26

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development....S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development.... Name: Research, Engineering & Development Advisory Committee. Time and Date: September 21, 2011--9 a.m...

  5. 75 FR 30804 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-06-02

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... public are welcome to observe the business of the Biomass Research and Development Technical Advisory...

  6. 75 FR 11526 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2010-03-11

    ... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY.... SUMMARY: This notice announces an open meeting of the Biomass Research and Development Technical Advisory... public are welcome to observe the business of the Biomass Research and Development Technical Advisory...

  7. 78 FR 47049 - Research, Engineering and Development Advisory Committee

    Science.gov (United States)

    2013-08-02

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development...; 5 U.S.C. App. 2), notice is hereby given of a meeting of the FAA Research, Engineering and.... Name: Research, Engineering & Development Advisory Committee. Time and Date: September 18--8:30 a.m. to...

  8. Unified fuel elements development for research reactors

    International Nuclear Information System (INIS)

    Vatulin, A.; Stetsky, Y.; Dobrikova, I.

    1998-01-01

    Square cross-section rod type fuel elements have been developed for russian pool-type research reactors. new fuel elements can replace the large nomenclature of tubular fuel elements with around, square and hexahedral cross-sections and to solve a problem of enrichment reduction. the fuel assembly designs with rod type fuel elements have been developed. The overall dimensions of existing the assemblies are preserved in this one. the experimental-industrial fabricating process of fuel elements, based on a joint extrusion method has been developed. The fabricating process has been tested in laboratory conditions, 150 experimental fuel element samples of the various sizes were produced. (author)

  9. 76 FR 9339 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-02-17

    ... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee under Section 9008(d) of the Food.... Tentative Agenda: Agenda will include the following: Update on USDA Biomass R&D Activities. Update on DOE...

  10. 76 FR 22091 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-04-20

    ... DEPARTMENT OF ENERGY Energy Efficiency and Renewable Energy Biomass Research and Development Technical Advisory Committee AGENCY: Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Notice of Open Meeting. SUMMARY: This notice announces an open meeting of the Biomass Research and...

  11. [Letter to the] Environment & Rural Development Committee meeting on sustainable development

    OpenAIRE

    Sustainable Development Commission Scotland

    2006-01-01

    On December 13th 2006, the Sustainable Development Commission gave evidence as part of the Environment & Rural Development Committee's enquiry into sustainable development. This letter was sent as a written submission before the meeting. Publisher PDF

  12. Poolside inspection, repair and reconstitution of LWR fuel elements. Proceedings of a Technical Committee meeting

    International Nuclear Information System (INIS)

    1998-11-01

    The Technical Committee Meeting on Poolside Inspection, repair and reconstruction of LWR Fuel Elements was organize by IAEA upon the recommendations of the International Working Group on Fuel performance Technology and held in Switzerland in October 1997. The purpose of the Meeting was to review the state of art in the area of poolside inspection, repair and reconstruction of light water fuel elements and to evaluate the progress achieved in this area since previous IAEA Meetings on the same topic in 1981 and 1984. The Meeting provided a forum on exchange of information between utilities, fuel designers and other authorities and specialists on a topic of current interest and real concern to industries in many Member States. The respective technologies are widely used or planned to be used in order to identify elementary major causes of fuel failure and to improve fuel utilization by repair and subsequent reuse of fuel elements. The Proceedings includes papers presented at the Meeting each described by a separate abstract

  13. Committees

    Science.gov (United States)

    2012-11-01

    Leadership Team of the IAHR Committee for Hydraulic Machinery and Systems Eduard EGUSQUIZA, UPC Barcelona, Spain, Chair François AVELLAN, EPFL-LMH, Switzerland, Past Chair Richard K FISHER, Voith Hydro Inc., USA, Past Chair Fidel ARZOLA, Edelca, Venezuela Michel COUSTON, Alstom Hydro, France Niklas DAHLBÄCKCK, Vatenfall, Sweden Normand DESY, Andritz VA TECH Hydro Ltd., Canada Chisachi KATO, University of Tokyo, Japan Andrei LIPEJ, Turboinstitut, Slovenija Torbjørn NIELSEN, NTNU, Norway Romeo SUSAN-RESIGA, 'Politehnica' University Timisoara, Romania Stefan RIEDELBAUCH, Stuggart University, Germany Albert RUPRECHT, Stuttgart University, Germany Qing-Hua SHI, Dong Fang Electrical Machinery Co., China Geraldo TIAGO, Universidade Federal de Itajubá, Brazil International Advisory Committee Shouqi YUAN (principal) Jiangsu University China QingHua SHI (principal) Dong Fang Electrical Machinery Co. China Fidel ARZOLA EDELCA Venezuela Thomas ASCHENBRENNER Voith Hydro GmbH & Co. KG Germany Anton BERGANT Litostroj Power doo Slovenia B C BHAOYAL Research & Technology Centre India Hermod BREKKE NTNU Norway Stuart COULSON Voith Hydro Inc. USA Paul COOPER Fluid Machinery Research Inc USA V A DEMIANOV Power Machines OJSC Russia Bart van ESCH Technische Universiteit Eindhoven Netherland Arno GEHRER Andritz Hydro Graz Austria Akira GOTO Ebara Corporation Japan Adiel GUINZBURG The Boeing Company USA D-H HELLMANN KSB AG Germany Ashvin HOSANGADI Combustion Research and Flow Technology USA Byung-Sun HWANG Korea Institute of Material Science Korea Toshiaki KANEMOTO Kyushu Institute of Technology Japan Mann-Eung KIM Korean Register of Shipping Korea Jiri KOUTNIK Voith Hydro GmbH & Co. KG Germany Jinkook LEE Eaton Corporation USA Young-Ho LEE Korea Maritime University Korea Woo-Seop LIM Hyosung Goodsprings Inc Korea Jun MATSUI Yokohama National University Japan Kazuyoshi Mitsubishi H I Ltd, Japan MIYAGAWA Christophe NICOLET Power Vision Engineering Srl Switzerland Maryse PAGE Hydro

  14. 76 FR 46781 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2011-08-03

    ..., 2011: 7:30 a.m.-2 p.m.; August 24, 2011: 7:30 a.m.-12:30 p.m. ADDRESSES: I Hotel, 1900 S. First Street... welcome to observe the business of the Biomass Research and Development Technical Advisory Committee. To... ext. 220; E- mail: hq.com ">[email protected] hq.com at least 7 business days prior to the meeting. Members...

  15. Accredited Standards Committee N15 Developments And Future Directions

    International Nuclear Information System (INIS)

    Mathews, Caroline E.; May, Melanie; Preston, Lynne

    2009-01-01

    Accredited Standards Committee (ASC) N15, Methods of Nuclear Material Control, is sponsored by the Institute of Nuclear Materials Management (INMM) to develop standards for protection, control and accounting of special nuclear materials in all phases of the nuclear fuel cycle, including analytical procedures where necessary and special to this purpose, except that physical protection of special nuclear material within a nuclear power plant is not included. Voluntary consensus standards complement federal regulations and technical standards and fulfill an important role for the nuclear regulatory agencies. This paper describes the N15 standards development process, with INMM as the Standards Developing Organization (SDO) and the N15 Committee responsible for implementation. Key components of the N15 standards development process include ANSI accreditation; compliance with the ANSI Essential Requirements (ER), coordination with other SDOs, communication with stakeholders, maintenance of balance between interest categories, and ANSI periodic audits. Recent and future ASC N15 activities are discussed, with a particular focus on new directions in anticipation of renewed growth in nuclear power.

  16. Water reactor fuel element modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-08-01

    The Technical Committee Meeting on Fuel Element Modelling at High Burnup and its Experimental Support was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). Its subject had been touched on in many of the IAEA's activities; however for the first time modellers and experimentalists were brought together to have an exchange of views on the research under way and to identify areas where new knowledge is necessary to improve the safety, reliability and/or economics of nuclear fuel. The timely organization of this meeting in conjunction with the second meeting of the Co-ordinated Research Programme on Fuel Modelling at Extended Burnup, in short ''FUMEX'', allowed fruitful participation of representatives of developing countries which are only rarely exposed to such a scientific event. The thirty-nine papers presented covered the status of codes and experimental facilities and the main phenomena affecting the fuel during irradiation, namely: thermal fuel performance, clad corrosion and pellet-cladding interaction (PCI) and fission gas release (FGR). Refs, figs, tabs

  17. Water reactor fuel element modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    The Technical Committee Meeting on Fuel Element Modelling at High Burnup and its Experimental Support was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). Its subject had been touched on in many of the IAEA`s activities; however for the first time modellers and experimentalists were brought together to have an exchange of views on the research under way and to identify areas where new knowledge is necessary to improve the safety, reliability and/or economics of nuclear fuel. The timely organization of this meeting in conjunction with the second meeting of the Co-ordinated Research Programme on Fuel Modelling at Extended Burnup, in short ``FUMEX``, allowed fruitful participation of representatives of developing countries which are only rarely exposed to such a scientific event. The thirty-nine papers presented covered the status of codes and experimental facilities and the main phenomena affecting the fuel during irradiation, namely: thermal fuel performance, clad corrosion and pellet-cladding interaction (PCI) and fission gas release (FGR). Refs, figs, tabs.

  18. Development and evaluation of separation elements

    International Nuclear Information System (INIS)

    Guimaraes, R.R.R.; Rocha, Z.

    1990-01-01

    For industrial testing of the uranium enrichment technology by the jet nozzle process, it is being erected in Resende the 'First Cascade' (FC) and it was built the Separation Element Plant (FES). For the development, optimization and quality control of the separation elements produced by FES, it was set up in CDTN a laboratorial infrastructure. As part of it, it was designed, built and assembled the Separation Slit Testing Equipment (ITRS), with several components developed and constructed in CDTN. The tests are being carried out in ITRS with the objective of adjusting the machine tools of FES used in the line production of the separation elements. From the satisfactory results obtained with these tests, FES will start the production of separation tubes to be installed in FC. The objective of this paper is to describe the operation and evaluation tests in ITRS, as well as to present their contribution to the development and quality control of the separation elements produced in FES. (author) [pt

  19. 75 FR 48411 - Research, Engineering and Development Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-08-10

    ... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Research, Engineering and Development.... 2), notice is hereby given of a meeting of the FAA Research, Engineering and Development (R, E&D) Advisory Committee. Name: Research, Engineering & Development Advisory Committee. Time and Date: September...

  20. Report of the summative evaluation by the advisory committee on fusion research and development

    International Nuclear Information System (INIS)

    2005-03-01

    The Research Evaluation Committee of the Japan Atomic Energy Research Institute (JAERI) set up an Advisory Committee on Fusion Research and Development in accordance with the 'Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations. The Advisory Committee on Fusion Research and Development evaluated the adequacy of the plans of fusion research and development to be succeeded from JAERI to a new research institute which will be established by integration of JAERI and the Japan Nuclear Cycle Development Institute (JNC). The Advisory Committee consisted of eight specialists from outside the JAERI conducted its activities from June 2004 to August 2004. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Advisory Committee meeting which was held on July 23, 2004, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Advisory Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on December 1, 2004. This report describes the result of the evaluation by the Advisory Committee on Fusion Research and Development. (author)

  1. Development and production of Zenith fissile elements

    Energy Technology Data Exchange (ETDEWEB)

    George, D; Wheatley, C C.H.; Lloyd, H

    1959-06-15

    The development of a new glass-bonded alumina-uranium oxide composition forming the fissile component of the Zenith fuel elements is described, together with the production of the initial charge containing 15 Kg. of U{sub 235]; the composition is capable of retaining fission product gases at high temperatures. The description includes criticality considerations, details of manufacture, and production statistics of the 11,000 discs produced.

  2. Elements to clarify the shale gas debate. Committee on Energy Prospective

    International Nuclear Information System (INIS)

    Balian, Roger; Balibar, Sebastien; Brechet, Yves; Brezin, Edouard; Candel, Sebastien; Cesarsky, Catherine; Combarnous, Michel; Courtillot, Vincent; Dercourt, Jean; Duplessy, Jean-Claude; Encrenaz, Pierre; Fontecave, Marc; Guillaumont, Robert; Pelegrin, Marc; Pironneau, Olivier; Pouchard, Michel; Rebut, Paul-Henri; Roux, Didier; Tissot, Bernard

    2013-01-01

    Shale gases have been the centre of heated debates for a few years. The opinions range from an outright ban on their exploitation to the notion that they might in an unexpected and almost miraculous way restore growth in our country and create jobs. In view of the importance of the questions raised by this topic, the Comite de Prospective en Energie de l'Academie des Sciences (CPE) provides elements to help clarify the debate and to formulate recommendations with the aim in particular of reducing current uncertainties. This report first describes the various contextual elements and then some recommendations that have been formulated. The first four recommendations concern research and exploration; the following five concern the exploitation of shale gases which could be potentially undertaken provided that necessary conditions, in particular for reducing environmental risks, are fulfilled. 1. Launch a research effort involving academic laboratories and major organizations to study all the scientific issues arising from the exploration and exploitation of shale gases. 2. Prepare exploration by making use of existing or archived geological, geophysical and geochemical data and involve geologists in the evaluation of reserves. 3. Develop studies and experiments aimed at evaluating and reducing the environmental impact of any potential exploitation. 4. Create an independent and multidisciplinary scientific authority to monitor actions taken to evaluate resources and their methods of exploitation. 5. Address issues of water management, a major problem in the exploitation of shale gases. 6. Implement environmental monitoring before, during and after exploitation. 7. Launch developments to improve the processes of hydraulic fracturing and develop alternative methods. 8. Initiate a research program to develop appropriate regulations to address the long-term tightness issues in exploitation drilling. 9. Full-scale tests should be carried out under conditions that

  3. Visit of H.E. Mr. Attila Chikan, Minister of Economic Affairs, Prof. Adam Török, President, National Committee for Technological Development, Mr. Pal Koncz, Deputy Director General, National Committee for Technological Development, Hungary

    CERN Multimedia

    Laurent Guiraud

    1999-01-01

    Visit of H.E. Mr. Attila Chikan, Minister of Economic Affairs, Prof. Adam Török, President, National Committee for Technological Development, Mr. Pal Koncz, Deputy Director General, National Committee for Technological Development, Hungary

  4. Development of polygon elements based on the scaled boundary finite element method

    International Nuclear Information System (INIS)

    Chiong, Irene; Song Chongmin

    2010-01-01

    We aim to extend the scaled boundary finite element method to construct conforming polygon elements. The development of the polygonal finite element is highly anticipated in computational mechanics as greater flexibility and accuracy can be achieved using these elements. The scaled boundary polygonal finite element will enable new developments in mesh generation, better accuracy from a higher order approximation and better transition elements in finite element meshes. Polygon elements of arbitrary number of edges and order have been developed successfully. The edges of an element are discretised with line elements. The displacement solution of the scaled boundary finite element method is used in the development of shape functions. They are shown to be smooth and continuous within the element, and satisfy compatibility and completeness requirements. Furthermore, eigenvalue decomposition has been used to depict element modes and outcomes indicate the ability of the scaled boundary polygonal element to express rigid body and constant strain modes. Numerical tests are presented; the patch test is passed and constant strain modes verified. Accuracy and convergence of the method are also presented and the performance of the scaled boundary polygonal finite element is verified on Cook's swept panel problem. Results show that the scaled boundary polygonal finite element method outperforms a traditional mesh and accuracy and convergence are achieved from fewer nodes. The proposed method is also shown to be truly flexible, and applies to arbitrary n-gons formed of irregular and non-convex polygons.

  5. 77 FR 47047 - Biomass Research and Development Technical Advisory Committee

    Science.gov (United States)

    2012-08-07

    ... Committee Act (Public Law No. 92-463, 86 Stat. 770) requires that agencies publish these notices in the.... ADDRESSES: Renaissance DuPont Hotel, 1143 New Hampshire Avenue, NW., Washington, DC 20037. FOR FURTHER...: In keeping with procedures, members of the public are welcome to observe the business of the Biomass...

  6. 78 FR 77773 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-12-24

    ... of the International Maritime Organization's (IMO) Sub-Committee on Human Element, Training and... to be considered include: --Decisions of other IMO bodies --Validation of model training courses... --Development of guidelines for wing-in-ground craft --Role of the human element --Development of guidance for...

  7. New developments in the CREAM Computing Element

    International Nuclear Information System (INIS)

    Andreetto, Paolo; Bertocco, Sara; Dorigo, Alvise; Capannini, Fabio; Cecchi, Marco; Zangrando, Luigi

    2012-01-01

    The EU-funded project EMI aims at providing a unified, standardized, easy to install software for distributed computing infrastructures. CREAM is one of the middleware products part of the EMI middleware distribution: it implements a Grid job management service which allows the submission, management and monitoring of computational jobs to local resource management systems. In this paper we discuss about some new features being implemented in the CREAM Computing Element. The implementation of the EMI Execution Service (EMI-ES) specification (an agreement in the EMI consortium on interfaces and protocols to be used in order to enable computational job submission and management required across technologies) is one of the new functions being implemented. New developments are also focusing in the High Availability (HA) area, to improve performance, scalability, availability and fault tolerance.

  8. AGU Committees

    Science.gov (United States)

    Administrative Committees are responsible for those functions required for the overall performance or well-being of AGU as an organization. These committees are Audit and Legal Affairs, Budget and Finance*, Development, Nominations*, Planning, Statutes and Bylaws*, Tellers.Operating Committees are responsible for the policy direction and operational oversight of AGU's primary programs. The Operating Committees are Education and Human Resources, Fellows*, Information Technology, International Participation*, Meetings, Public Affairs, Public Information, Publications*.

  9. Prefabricated elements and structures: Developments, tests and experiences

    DEFF Research Database (Denmark)

    Goltermann, Per

    2014-01-01

    Danish concrete structures are often built with prefabricated elements, joined together on the site and this provides a large challenge to constantly improve and optimize the elements, the joints and the models. DTU Byg has been active in the development, testing and modelling of new elements...

  10. High temperature gas cooled reactor technology development. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-12-01

    The successful introduction of an advanced nuclear power plant programme depends on many key elements. It must be economically competitive with alternative sources of energy, its technical development must assure operational dependability, the support of society requires that it be safe and environmentally acceptable, and it must meet the regulatory standards developed for its use and application. These factors interrelate with each other, and the ability to satisfy the established goals and criteria of all of these requirements is mandatory if a country or a specific industry is to proceed with a new, advanced nuclear power system. It was with the focus on commercializing the high temperature gas cooled reactor (HTGR) that the IAEA's International Working Group on Gas Cooled Reactors recommended this Technical Committee Meeting (TCM) on HTGR Technology Development. Over the past few years, many Member States have instituted a re-examination of their nuclear power policies and programmes. It has become evident that the only realistic way to introduce an advanced nuclear power programme in today's world is through international co-operation between countries. The sharing of expertise and technical facilities for the common development of the HTGR is the goal of the Member States comprising the IAEA's International Working Group on Gas Cooled Reactors. This meeting brought together key representatives and experts on the HTGR from the national organizations and industries of ten countries and the European Commission. The state electric utility of South Africa, Eskom, hosted this TCM in Johannesburg, from 13 to 15 November 1996. This TCM provided the opportunity to review the status of HTGR design and development activities, and especially to identify international co-operation which could be utilized to bring about the commercialization of the HTGR

  11. Development of the Fuel Element Database of PUSPATI TRIGA Reactor

    International Nuclear Information System (INIS)

    Nurhayati Ramli; Naim Syauqi Hamzah; Nurfazila Husain; Yahya Ismail; Mat Zin Mat Husin; Mohd Fairus Abd Farid

    2015-01-01

    Since June 28th, 1982, the PUSPATI TRIGA Reactor (RTP) operates safely with an accumulated energy release of about 17,200 MWhr, which corresponds to about 882 g of uranium burn-up. The reactor core has been reconfigured 15th times. Presently, there are 111 TRIGA fuel elements in the core, which 66 of the fuel elements are from the initial criticality while the rest of the fuel elements have been added to compensate the uranium consumption. As 59 % of the fuel elements are older than 30 years old, it is necessary to put the history of every fuel element in a database for easy access of the fuel element movement, inspection results history and integrity status. This paper intends to describe how the fuel element database is developed and related formulae used in determining the RTP fuel element elongation. (author)

  12. Minutes of 'Technical Committee for Geological Isolation Research and Development (1st time)'

    International Nuclear Information System (INIS)

    Sasaki, Yasuo; Torata, Shinichiro

    2007-03-01

    In order to plan and conduct a program of research and development (R and D) for geological disposal of high-level radioactive waste in JAEA-Tokai, JAEA decided to receive technical comments and advices from the Technical Committee for geological isolation R and D. This committee, which is constituted of specialists who do not belong to JAEA, has evaluated the program, taking into account of the status of geological disposal technology in Japan as well as foreign countries. This report compiles the minutes of the first meeting held in July 2006. (author)

  13. Report of the summative evaluation by the advisory committee on research and development of nuclear energy technology

    International Nuclear Information System (INIS)

    2005-03-01

    The Research Evaluation Committee of the Japan Atomic Energy Research Institute (JAERI) set up an advisory Committee on Research and Development of Nuclear Energy Technology in accordance with the 'Fundamental Guideline for the Evaluation of Research and Development (R and D) at JAERI' and its subsidiary regulations. The Advisory Committee on Research and Development of Nuclear Energy Technology evaluated the adequacy of the plans of safety research to be succeeded from JAERI to a new research institute which will be established by integration of JAERI and the Japan Nuclear Cycle Development Institute (JNC). The Advisory Committee consisted of nine specialists from outside the JAERI conducted its activities from July 2004 to August 2004. The evaluation was performed on the basis of the materials submitted in advance and of the oral presentations made at the Advisory Committee meeting which was held on August 10, 2004, in line with the items, viewpoints, and criteria for the evaluation specified by the Research Evaluation Committee. The result of the evaluation by the Advisory Committee was submitted to the Research Evaluation Committee, and was judged to be appropriate at its meeting held on December 1, 2004. This report describes the result of the evaluation by the Advisory Committee on Research and Development on Nuclear Energy Technology. (author)

  14. SMART SPECIALIZATION, ELEMENT OF REGIONAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Florina Popa

    2016-06-01

    Full Text Available Research-Development and innovation expenditure (conditions of a few high specializations in different fields of science know an increasing importance, both at countries level and regions, on the background of challenges that occur in economic growth, at European Union level, involving investment increase in knowledge, respectively, education, professional training, research and development. The existence of a good model of territorial development means finding a strategy and governance able to create new economic activities that capitalize the competitive and comparative advantages of territorial potential, in global context. The new strategy of economic transformation at local level, the smart specialization, aims to promote efficient and effective use of public investment in research, based on innovation encouragement, at regional level, that should lead to economic growth and prosperity of regions. The implementation of strategy`s instruments involves an integrated approach, by using own forces and potential of each region, that should meet the requirements of European Agenda, for growth and competitiveness achievement. By identifying the fields with high potential, at regional level, and their strengthening, the smart specialization can concur to regions access on global markets and international value chain. The study briefly expounds the concept of smart specialization and its constituent sizes, principles of action in the field of research-development and innovation. There are also considered the implementation stages of "strategy", in the interventions at regional level, as well as the advantages and risks that it entails.

  15. Report of the committee on a commercially developed space facility

    Science.gov (United States)

    Shea, Joseph F.; Stever, H. Guyford; Cutter, W. Bowman, III; Demisch, Wolfgang H.; Fink, Daniel J.; Flax, Alexander H.; Gatos, Harry C.; Glicksman, Martin E.; Lanzerotti, Louis J.; Logsdon, John M., III

    1989-01-01

    Major facilities that could support significant microgravity research and applications activity are discussed. The ground-based facilities include drop towers, aircraft flying parabolic trajectories, and sounding rockets. Facilities that are intrinsically tied to the Space Shuttle range from Get-Away-Special canisters to Spacelab long modules. There are also orbital facilities which include recoverable capsules launched on expendable launch vehicles, free-flying spacecraft, and space stations. Some of these existing, planned, and proposed facilities are non-U.S. in origin, but potentially available to U.S. investigators. In addition, some are governmentally developed and operated whereas others are planned to be privately developed and/or operated. Tables are provided to show the facility, developer, duration, estimated gravity level, crew interaction, flight frequency, year available, power to payload, payload volume, and maximum payload mass. The potential of direct and indirect benefits of manufacturing in space are presented.

  16. Development and evaluation of a multidisciplinary controlled substances committee within a patient-centered medical home.

    Science.gov (United States)

    Gernant, Stephanie A; Bastien, Rachel; Lai, Andrea

    2015-01-01

    To present the development of a multidisciplinary controlled substances committee and describe its effectiveness in relation to prescribers' acceptance of committee recommendations, the number of premature deaths associated with controlled substances, and prescribers' need for education on controlled substances. A patient-centered medical home and accountable care organization in Maine that serves more than 60,000 patients across a large rural area, 70% of whom are classified as lower income. A multidisciplinary group of prescribers and PharmD residents created a committee to influence organizational culture regarding controlled substances. The Controlled Substances Initiative Committee (CSIC) updated institutional policies, developed provider education, and made personalized patient recommendations to prescribers. The primary outcome was average change in daily morphine equivalent dose (MED) in patients for whom CSIC recommended a dose reduction to the patient's prescriber. Secondary outcomes included the proportion of patients who died of a known overdose or suspected drug-related death during 2012-2013 or 2013-2014. In addition, prescriber beliefs about controlled substances were measured via a needs assessment. The average daily MED for patients whom CSIC recommended dose reduction was lower after 3 months compared with at baseline (175.5 ± 344.3 mg vs. 292.7 ± 466.5 mg; P vs. 11.1%; P = 1.00). However, a greater number of patients had a suspected drug-related death during 2013-2014 compared with during 2012-2013 (0% vs. 27.3%; P = 0.05). A multidisciplinary controlled substances committee may improve patient safety and outcomes by offering prescriber support and helping alter prescribing culture.

  17. Development of international standards for surface analysis by ISO technical committee 201 on surface chemical analysis

    International Nuclear Information System (INIS)

    Powell, C.J.

    1999-01-01

    Full text: The International Organization for Standardization (ISO) established Technical Committee 201 on Surface Chemical Analysis in 1991 to develop documentary standards for surface analysis. ISO/TC 201 met first in 1992 and has met annually since. This committee now has eight subcommittees (Terminology, General Procedures, Data Management and Treatment, Depth Profiling, AES, SIMS, XPS, and Glow Discharge Spectroscopy (GDS)) and one working group (Total X-Ray Fluorescence Spectroscopy). Each subcommittee has one or more working groups to develop standards on particular topics. Australia has observer-member status on ISO/TC 201 and on all ISO/TC 201 subcommittees except GDS where it has participator-member status. I will outline the organization of ISO/TC 201 and summarize the standards that have been or are being developed. Copyright (1999) Australian X-ray Analytical Association Inc

  18. Further developments of PWR and BWR fuel elements

    International Nuclear Information System (INIS)

    Sofer, G.A.; Busselman, G.J.; Federico, L.J.

    1988-01-01

    The performance, safety, and economy of nuclear power plants in inluenced very decisively by the quality of their fuel elements. This is why quality assurance in fuel fabrication has been a factor of great importance from the outset. Operating experince and more stringent performance requirements have resulted in a continuous process of further development of fuel elements, which has been reflected also in lower and lower failure rates and increasingly higher burn-ups. Next to further development also innovation has been an important factor contributing to the present high quality level of fuel elements, which also has allowed fuel cycle costs to be decreased quite considerably. (orig.) [de

  19. Review of fuel element development for nuclear rocket engines

    International Nuclear Information System (INIS)

    Taub, J.M.

    1975-06-01

    The Los Alamos Scientific Laboratory (LASL) entered the nuclear propulsion field in 1955 and began work on all aspects of a nuclear propulsion program involving uranium-loaded graphite fuels, hydrogen propellant, and a target exhaust temperature of approximately 2500 0 C. A very extensive uranium-loaded graphite fuel element technology evolved from the program. Selection and composition of raw materials for the extrusion mix had to be coupled with heat treatment studies to give optimum element properties. The highly enriched uranium in the element was incorporated as UO 2 , pyrocarbon-coated UC 2 , or solid solution UC . ZrC particles. An extensive development program resulted in successful NbC or ZrC coatings on elements to withstand hydrogen corrosion at elevated temperatures. Hot gas, thermal shock, thermal stress, and NDT evaluation procedures were developed to monitor progress in preparation of elements with optimum properties. Final evaluation was made in reactor tests at NRDS. Aerojet-General, Westinghouse Astronuclear Laboratory, and the Oak Ridge Y-12 Plant of Union Carbide Nuclear Company entered the program in the early 1960's, and their activities paralleled those of LASL in fuel element development. (U.S.)

  20. [Development and opportunities from de scientific committee of 25 SECA congress held in Barcelona, 2007].

    Science.gov (United States)

    Astier Peña, M P; Lorenzo Martínez, S; Santiñá, M; Martín, A

    2009-01-01

    To perform a self-assessment of the Scientific Committee of the 25th Conference of the Spanish Society for Quality in Healthcare held in Barcelona on October 2007 in order to identify improvement areas for future Conferences. Applying PDCA methodology to the tasks undertaken by the Scientific Committee (SC) of the Conference. Plan: A description of the preparation of the conference based on the abstract management of the Scientific Committee. Do: description of the implementation. Check: evaluation of activities. A: improvement proposals for the coming conferences. The SC (22 people) worked in the abstracts management, book publishing and development of the scientific aspects of the Conference. Abstracts evaluation was conducted by 11 pairs of blind evaluators who analysed 348 oral communications and 457 posters, and 10.09% were rejected. Oral communications were performed in a total of 36 oral presentations sessions and 24 poster sessions. The book was published with the abstracts, addresses and the Conference opening and closing sessions. Awards: communications graded over 7.5 applied for an award and were reassessed by the SC. The on-line conference was also well received. The satisfaction with the Conference regarding the scientific activities was good; however, several areas of improvement were identified.

  1. Fuel element database: developer handbook; Entwicklerhandbuch zur Brennelement-Datenbank

    Energy Technology Data Exchange (ETDEWEB)

    Dragicevic, M [Atominstitut der Oesterreichischen Universitaeten (Austria)

    2004-09-15

    The fuel elements database which was developed for Atomic Institute of the Austrian Universities is described. The software uses standards like HTML, PHP and SQL. For the standard installation freely available software packages such as MySQL database or the PHP interpreter from Apache Software Foundation and Java Script were used. (nevyjel)

  2. Exploring Elements That Support Teachers Engagement in Online Professional Development

    Science.gov (United States)

    Prestridge, Sarah; Tondeur, Jo

    2015-01-01

    This study sought to identify the most effective elements required in online professional development to enable teachers to improve their use of Information and Communications Technologies (ICT) in their classrooms. Four schools in Queensland were involved, with twelve classroom teachers participating in a year-long online professional development…

  3. A report of the study committee on problems of the cooperation with developing countries

    International Nuclear Information System (INIS)

    1985-01-01

    In the long-range program of nuclear energy development and utilization, the need for cooperation with developing countries, meeting their expectations, is stated, while such expectations toward Japan are rising recently. Various aspects in this cooperation have been studied by the ad hoc committee. and the results are presented in this report. The cooperation with developing countries in the nuclear field is significant in its contribution to the economic advances in those countries, Japan's responsibility of lending the aid to the countries, and so on. Contents are the following: significance of the cooperation, the present states of nuclear energy research and development in the developing countries and the expectations, the present state of cooperation and problems in Japan, future aspects of the cooperation with developing countries. (Mori, K.)

  4. The recent development in understanding the periodic table of elements

    International Nuclear Information System (INIS)

    Niizeki, K.

    1986-01-01

    The recent development in understanding the periodic table of elements is reviewed. The author's concern is focussed on the effects which make different elements of a group of the periodic table to have different chemical properties, which result in that different members of a homologous series of compounds have different physical properties. The most important effect is due to the effective repulsion of the valence orbital of an atom from the core region by orthogonality with the core orbitals with the same azimuthal quantum number

  5. Achievements of element technology development for breeding blanket

    International Nuclear Information System (INIS)

    Enoeda, Mikio

    2005-03-01

    Japan Atomic Energy Research Institute (JAERI) has been performing the development of breeding blanket for fusion power plant, as a leading institute of the development of solid breeder blankets, according to the long-term R and D program of the blanket development established by the Fusion Council of Japan in 1999. This report is an overview of development plan, achievements of element technology development and future prospect and plan of the development of the solid breeding blanket in JAERI. In this report, the mission of the blanket development activity in JAERI, key issues and roadmap of the blanket development have been clarified. Then, achievements of the element technology development were summarized and showed that the development has progressed to enter the engineering testing phase. The specific development target and plan were clarified with bright prospect. Realization of the engineering test phase R and D and completion of ITER test blanket module testing program, with universities/NIFS cooperation, are most important steps in the development of breeding blanket of fusion power demonstration plant. (author)

  6. The Development of Piezoelectric Accelerometers Using Finite Element Analysis

    DEFF Research Database (Denmark)

    Liu, Bin

    1999-01-01

    This paper describes the application of Finite Element (FE) approach for the development of piezoelectric accelerometers. An accelerometer is simulated using the FE approach as an example. Good agreement is achieved between simulated results and calibrated results. It is proved that the FE modeling...... can be effectively used to predict the specifications of the accelerometer, especially when modification of the accelerometer is required. The FE developing technology forms the bases of fast responsiveness and flexible customized design of piezoelectric accelerometers....

  7. Development of nuclear power. Thirty-second report from the Committee, session 1983-84

    International Nuclear Information System (INIS)

    1984-01-01

    The report falls under the headings: introduction; the UK Atomic Energy Authority - role and accountability; the Department of Energy's control arrangements; UKAEA internal control of programmes and projects; the fast reactor programme; general; summary of specific conclusions. Minutes of evidence before the committee cover the following matters relating to the development of nuclear power in the United Kingdom: the relevant activities and responsibilities of the Department of Energy and the UKAEA; programme planning and control; CEGB activities; fast reactors; radioactive waste management; economics. (U.K.)

  8. Endplug Welding Techniques developed for SFR Metallic Fuel Elements

    International Nuclear Information System (INIS)

    Lee, Jung Won; Kim, Soo Sung; Woo, Yoon Myeng; Kim, Hyung Tae; Lee, Ho Jin; Kim, Ki Hwan

    2013-01-01

    In Korea, the R and D on SFR has been begun since 1997, as one of the national long-term nuclear R and D programs. The international collaborative research is under way on fuel developments within Advanced Fuel Project for Gen-IV SFR with the closed fuel cycle of full actinide recycling, while TRU bearing metallic fuel, U-TRU-Zr alloy fuel, was selected and is being developed. For the fabrication of SFR metallic fuel elements, the endplug welding is a crucial process. The sealing of endplug to cladding tube should be hermetically perfect to prevent a leakage of fission gases and to maintain a good reactor performance. In this study, the welding technique, welding equipment, welding conditions and parameters were developed to make SFR metallic fuel elements. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established. In order to make SFR metallic fuel elements, the welding technique, welding equipment, welding conditions and parameters were developed. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established

  9. Endplug Welding Techniques developed for SFR Metallic Fuel Elements

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Won; Kim, Soo Sung; Woo, Yoon Myeng; Kim, Hyung Tae; Lee, Ho Jin; Kim, Ki Hwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    In Korea, the R and D on SFR has been begun since 1997, as one of the national long-term nuclear R and D programs. The international collaborative research is under way on fuel developments within Advanced Fuel Project for Gen-IV SFR with the closed fuel cycle of full actinide recycling, while TRU bearing metallic fuel, U-TRU-Zr alloy fuel, was selected and is being developed. For the fabrication of SFR metallic fuel elements, the endplug welding is a crucial process. The sealing of endplug to cladding tube should be hermetically perfect to prevent a leakage of fission gases and to maintain a good reactor performance. In this study, the welding technique, welding equipment, welding conditions and parameters were developed to make SFR metallic fuel elements. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established. In order to make SFR metallic fuel elements, the welding technique, welding equipment, welding conditions and parameters were developed. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established.

  10. The development of a curved beam element model applied to finite elements method

    International Nuclear Information System (INIS)

    Bento Filho, A.

    1980-01-01

    A procedure for the evaluation of the stiffness matrix for a thick curved beam element is developed, by means of the minimum potential energy principle, applied to finite elements. The displacement field is prescribed through polynomial expansions, and the interpolation model is determined by comparison of results obtained by the use of a sample of different expansions. As a limiting case of the curved beam, three cases of straight beams, with different dimensional ratios are analised, employing the approach proposed. Finally, an interpolation model is proposed and applied to a curved beam with great curvature. Desplacements and internal stresses are determined and the results are compared with those found in the literature. (Author) [pt

  11. Practices and developments in spent fuel burnup credit applications. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-10-01

    The International Atomic Energy Agency convened a technical committee Meeting on Requirements, Practices and Developments in Burnup Credit (BUC) Applications in Madrid, Spain, from 22 to 26 April 2002. The purpose of this meeting was to explore the progress and status of international activities related to the BUC applications for spent nuclear fuel. This meeting was the third major meeting on the uses of BUC for spent fuel management systems held since the IAEA began to monitor the uses of BUC in spent fuel management systems in 1997. The first major meeting was an Advisory Group meeting (AGM), which was held in Vienna, in October 1997. The second major meeting was a technical committee meeting (TCM), which was held in Vienna, in July 2000. Several consultants meetings were held since 1997 to advise and assist the IAEA in planning and conducting its BUC activities. The proceedings of the 1997 AGM were published as IAEA-TECDOC-1013, and the proceedings of the 2000 TCM as IAEA-TECDOC-1241. BUC for wet and dry storage systems, spent fuel transport, reprocessing and final disposal is needed in many Member States to allow for increased enrichment, and to increase storage capacities, cask capacities and dissolver capacities avoiding the need for extensive modifications. The use of BUC is a necessity for spent fuel disposal.

  12. Fusion Policy Advisory Committee (FPAC)

    International Nuclear Information System (INIS)

    1990-09-01

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan

  13. Development and Evaluation of Mould for Double Curved Concrete Elements

    DEFF Research Database (Denmark)

    Jepsen, Christian Raun; Kristensen, Mathias Kræmmergaard; Kirkegaard, Poul Henning

    2011-01-01

    freeform concrete formwork are available, and more are being developed [1-4]. The common way of producing moulds for unique elements today is to manufacture one mould for each unique element using CNC milling in cheaper materials, but since the method is still labour intensive and produces a lot of waste......Complex freeform architecture is one of the most striking trends in contemporary architecture. Architecture differs from traditional target industries of CAD/CAM technology in many ways including aesthetics, statics, structural aspects, scale and manufacturing technologies. Designing a piece...... of freeform architecture in a CAD program is fairly easy, but the translation to a real piece of architecture can be difficult and expensive and as traditional production methods for free-form architecture prove costly, architects and engineers are forced to simplify designs. Today, methods for manufacturing...

  14. Management of developing swimming performance in National Paralympic Committee of Indonesia

    Directory of Open Access Journals (Sweden)

    Nonik Rahmawati

    2018-05-01

    Full Text Available The main objective of this study is to understand and analyze structural organization of NPC (National Paralympic Committee of Indonesia on managing swimming performance,recruitment system, infrastructure management, funding management and implementation of the exercise management on managing swimming performance. This study was conducted at Head Office of NPC Indonesia and Kartasura Swimming Pool, Central Java Province. This studyis made in qualitative manner and presented in descriptive approach. The data collection is conducted by doing observation, document analysis, and interviews. The results of the management of developing swimming performance in NPC (National Paralympic Committee of Indonesia are summarized as follows: 1 there are general chairman, the head of the achievement division, the head of the sports department, coach manager and then directed to the coach coordinator and coach’s assistant in the organizational structure 2 recruitment of the organization is held by choosing people who concerned about NPC of Indonesia, recruitment of coach is held without any special tests, which is selected by: giving priority to athletes who have ever won medals and have experienced in coaching, while recruitment of athletes is held by using special test by NPC of Indonesia, 3 facilities, in the form of swimming’s support tools, are given gradually by Ministry of Youth and Sports Affairsby submitting proposals. Meanwhile, facility such as swimming pool still depends on renting Kartasura Swimming Pool, 4 the funding is obtained from Ministry of Youth and Sports Affairs without any sponsorship, 5 training program is held by giving suitable program in general preparation, special preparation, pre match, and also considering athletes’ physical condition, technique, and mental status. Training program can be developed according to the condition of each athlete. Based on the analysis, it can be concluded that management of developing swimming

  15. Actual Status of CAREM-25 Fuel Element Development

    International Nuclear Information System (INIS)

    Perez, Edmundo

    2000-01-01

    In the frame of the CAREM Project, under Cnea s Reactor and Nuclear Plants Program, the Nuclear Fuel Thematic Area is one among others on which the project is organized. In this area, the primary objective to reach is to actualize the mechanical fuel element and reactivity control designs, taking in account the recents conceptual and engineering modifications introduced in the reactor, and ending with a consolidated conceptual and basic development.In order to reach these objectives, it is presented the way on which the area was organized, the participating working groups, the task required, the personnel involucrated, the grade of global development reached in the areas of engineering, developments, fabrication and essays of design verification, and the found difficulties, the tasks under ejecution, just finished and necessaries to fulfill completely the objectives. Finally, it is possible to say that due to the work realized, the conceptual design of both components is finished and the basic design is under development

  16. Establishment of audit committees in government ministries of a developing country

    Directory of Open Access Journals (Sweden)

    Ndeshipewa Johanna Akwenye

    2016-11-01

    Full Text Available The underlying study to this paper attempts to establish to what extent audit committees in government ministries in Namibia have been established as a requirement for enhanced quality of service delivery and accountability to taxpayers A qualitative approach was followed, where questionnaires or an interviews were conducted with accounting officers in government ministries. Content and thematic analyses were used to formulate narratives based on the understanding of similarities and differences in respondents’ experiences, views and perceptions. The study shows that from the 17 ministries that responded, only 2 ministries have established audit committees. Confirmatory, there is currently no legislature that makes it mandatory for government ministries in Namibia to establish audit committees within their respective constituencies. There are no formal audit committee terms and references or an audit committee charters are in place. Government ministries in Namibia seem to not have adopted best national and international governance practices with respect to the establishment of audit committees within their ministries. There is a need for a clear guidance as to how audit committees must be established; the composition of the committee members, the terms of office of committee members and remuneration, to mention a few

  17. Recent developments in the synthesis of super heavy elements

    International Nuclear Information System (INIS)

    Ackermann, D.

    2001-01-01

    Throughout the passed two decades isotopes of the elements with atomic numbers 107-112 have been synthesized and unambiguously identified at the velocity filter SHIP at GSI. In a recent experiment at SHIP the results for element 112 have been confirmed and a third decay chain of the isotope 277 112 has been observed. Cold fusion reactions using Pb- and Bi- targets and evaporation residue(ER)-α-α correlations together with an efficient separation and detection system are the major ingredients for the success of these experiments. The sensitivity limit of the set-up at GSI has reached the 1pb level. For a systematic investigation in this region of the chart of nuclei and to synthesize heavier nuclei this limit has to be pushed to even lower values. An extensive development program is pursued at SHIP in order to reach at least an order of magnitude lower cross sections. Systematic investigations, the construction of decay chain networks and mass measurements are some of the possible approaches to study the decay chains attributed to isotopes of the elements 114, 116 and 118 at Dubna and Berkeley, which are, in contrast to those observed at GSI, not connected to decays of known isotopes. For the Berkeley results, in particular, several trials of confirmation have been undertaken at various laboratories including GSI

  18. Present status and further objectives of SNR fuel element development

    International Nuclear Information System (INIS)

    Karsten, G.

    Within the scope of the fuel element development program for the fast breeder reactor SNR 300, 500 fuel pins have been irradiated since 1964, 250 of them in fast flux. Results indicate that the maximum nominal target burnup of 90.000 MWd/t of the SNR 300 Mk Ia possibly can be reached. The main problems, which arise from clad swelling and internal corrosion, can be met by special pretreatments of the austenitic stainless steel 1.4970 and a fuel stoichiometry of 1.97. Beyond this target burnup either material property improvements have to be made or burnup reductions have to be accepted. The remaining questions can be answered by the use of the SNR 300 as a test reactor. A further target is the development of a carbide fuel element, which should be very effective in a high power breeder reactor because of its low fissile inventory and high breeding gain. This development program will also be finalized in the SNR 300. (U.S.)

  19. The Deep Roots of the Fairness Committee in Kohlberg's Moral Development Theory

    Science.gov (United States)

    Olson, Christine

    2011-01-01

    Earlier essays in this symposium describe Restorative Justice processes in schools, referred to in our school as a Fairness Committee. Implementing these collaborative, restorative processes does not come without challenges. This essay will explore some of the historical and theoretical roots of the Fairness Committee in Lawrence Kohlberg's work…

  20. Separations chemistry for f elements: Recent developments and historical perspective

    International Nuclear Information System (INIS)

    Nash, K.L.; Choppin, G.R.

    1995-01-01

    With the end of the cold war, the principal mission in actinide separations has changed from production of plutonium to cleanup of the immense volume of moderately radioactive mixed wastes which resulted from fifty years of processing activities. In order to approach the cleanup task from a proper perspective, it is necessary to understand the nature of the problem and how the wastes were generated. In this report, the history of actinide separations, both the basic science and production aspects, is examined. Many of the separations techniques in use today were developed in the 40's and 50's for the identification and production of actinide elements. To respond to the modern world of actinide separations new techniques are being developed for separations ranging from analytical methods to detect ultra-trace concentrations (for bioassay and environmental monitoring) to large scale waste treatment procedures. Some of these new methods are ''improvements'' or adaptations of the historical techniques. Total actinide recovery, lanthanide/actinide separations, and selective partitioning of actinides from inert constituents are of primary concern. This report, offers a historical perspective, review the current status of f element separation processes, and suggest areas for continued research in both actinide separations and waste cleanup/environment remediation

  1. Progress in Developing Finite Element Models Replicating Flexural Graphite Testing

    International Nuclear Information System (INIS)

    Bratton, Robert

    2010-01-01

    This report documents the status of flexural strength evaluations from current ASTM procedures and of developing finite element models predicting the probability of failure. This work is covered under QLD REC-00030. Flexural testing procedures of the American Society for Testing and Materials (ASTM) assume a linear elastic material that has the same moduli for tension and compression. Contrary to this assumption, graphite is known to have different moduli for tension and compression. A finite element model was developed and demonstrated that accounts for the difference in moduli tension and compression. Brittle materials such as graphite exhibit significant scatter in tensile strength, so probabilistic design approaches must be used when designing components fabricated from brittle materials. ASTM procedures predicting probability of failure in ceramics were compared to methods from the current version of the ASME graphite core components rules predicting probability of failure. Using the ASTM procedures yields failure curves at lower applied forces than the ASME rules. A journal paper was published in the Journal of Nuclear Engineering and Design exploring the statistical models of fracture in graphite.

  2. [Third preparatory committee for the International Conference on Population and Development. Peru presentation].

    Science.gov (United States)

    Lopez, C

    1994-01-01

    This address by the Peruvian delegation to the Third Preparatory Committee Meeting for the International Conference on Population and Development focuses on four points in the proposed Plan of Action that might require further development. First, the link between drug trafficking and environmental degradation should be recognized. Cultivation of narcotic plants contributes to deforestation of the tropical forest and contamination of rivers, and along with terrorism has caused considerable population movement in Peru. The second point is that widespread poverty, limited investment in human capital, insufficient institutional capacity, and the external debt burden of the developing countries are clearly interrelated with sociodemographic processes and decisively affect the capacity of the nation to implement population policies and programs as a function of current and future international commitments. The third point is that, in the area of information, education, and communication, attention should be given to the entire life cycle and the entirety of themes related to population. Finally, coordinated programs between public and private institutions and nongovernmental organizations at the national level, and between the U.N. Population Fund, the Population Commission, and the Commission on Sustainable Development at the international level, should be organized to assure effective follow-up on Plan of Action proposals and agreements. Peru has participated in a wide variety of international conferences and activities related to population, and was a major participant in the subregional preparatory conference of the Andean nations.

  3. Training for an effective health and safety committee in a small business setting.

    Science.gov (United States)

    Crollard, Allison; Neitzel, Richard L; Dominguez, Carlos F; Seixas, Noah S

    2013-01-01

    Health and safety committees are often heralded as a key element of successful health and safety programs, and are thought to represent a means of engaging workers in health and safety efforts. While the understanding of the factors that make these committees effective is growing, there are few resources for how to assist committees in developing these characteristics. This paper describes one approach to creating and implementing a training intervention aimed at improving health and safety committee function at one multilingual worksite. Short-term impacts were evaluated via questionnaire and qualitative observations of committee function. Results indicated high satisfaction with the training as well as modest increases in participation, cooperation, role clarity, and comfort with health and safety skills among committee members. The committee also made considerable achievements in establishing new processes for effective function. Similar interventions may be useful in other workplaces to increase health and safety committee success.

  4. Development of a finite element model of the human abdomen.

    Science.gov (United States)

    Lee, J B; Yang, K H

    2001-11-01

    Currently, three-dimensional finite element models of the human body have been developed for frequently injured anatomical regions such as the brain, chest, extremities and pelvis. While a few models of the human body include the abdomen, these models have tended to oversimplify the complexity of the abdominal region. As the first step in understanding abdominal injuries via numerical methods, a 3D finite element model of a 50(th) percentile male human abdomen (WSUHAM) has been developed and validated against experimental data obtained from two sets of side impact tests and a series of frontal impact tests. The model includes a detailed representation of the liver, spleen, kidneys, spine, skin and major blood vessels. Hollow organs, such as the esophagus, stomach, small and large intestines, gallbladder, bile ducts, ureters, rectum and adrenal glands are grouped into three bodybags in order to provide realistic inertial properties and to maintain the position of the solid organs in their appropriate locations. Using direct connections, the model was joined superiorly to a partial model of the human thorax, and inferiorly to models of the human pelvis and the lower extremities that have been previously developed. Material properties for various tissues of the abdomen were derived from the literature. Data obtained in a series of cadaveric pendulum impact tests conducted at Wayne State University (WSU), a series of lateral drop tests conducted at Association Peugeot-Renault (APR) and a series of cadaveric lower abdomen frontal impact tests conducted at WSU were used to validate the model. Results predicted by the model match these experimental data for various impact speeds, impactor masses and drop heights. Further study is still needed in order to fully validate WSUHAM before it can be used to assess various impact loading conditions associated with vehicular crashes.

  5. IMMATERIAL CULTURAL ELEMENTS PATRIMONIAZATION AND LOCAL SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Alejandro Martínez-de la Rosa

    2015-07-01

    Full Text Available Tourism and heritage studies in Mexico are mainly focused on two major areas: specific ecological areas and historical edifications. However, in the last ten years they have proposed initiatives to consider the practices related to the state and federal levels immaterial. Until today there are seven elements in the UNESCO’s Representative List of Intangible Cultural Heritage belonging to Mexico. From conceptual review of the terms used to justify the safeguarding of intangible cultural heritage in international conventions of the past fifty years, it will reflect on the relationship between processed of patrimonialization and sustainable development projects, first from a general point of view about specific problems of application in Mexico for later review.

  6. DEVELOPING STANDARDS FOR ASSESSING ENVIRONMENTAL CHEMICAL, PHYSICAL, AND BIOLOGICAL STRESSORS THROUGH ASTM COMMITTEE E47: A PAST FOUNDATION OF PROVEN STANDARDS, A FUTURE OF GREAT POTENTIAL AND OPPORTUNITY

    Science.gov (United States)

    Development of standards associated with assessing the bioavailability of contaminants in sediment will be used as a case study for how standards have been developed through Committee E47. In 1987, Committee E47 established Subcommittee E47.03 on Sediment Assessment and Toxicity....

  7. Audit Committee Practice in the Polish Listed Stock Companies. Present Situation and Development Perspectives

    Directory of Open Access Journals (Sweden)

    Piotr Szczepankowski

    2012-06-01

    Full Text Available The audit committee is one of the parts of corporate governance mechanism, which is understood as the relationship between corporate managers, directors and the providers of equity, people and institutions who save and invest their capital to earn the return. This study presents survey research results of audit committee activity in Polish public stock companies quoted on the Warsaw Stock Exchange (WSE. The purpose of this paper is to present the audit committee practice in Poland after 2009. The paper shows that the audit committee practice is still the most problematic issue of transitional Polish corporate governance rules. The survey has shown that the corporate needs and its implementation, and communication with listed companies leave a lot of room for improvement. The paper is based on the documents prepared in 2010 by PricewaterhouseCoopers, the Polish Association of Listed Companies and the Polish Institute of Directors.

  8. Development of quadrilateral spline thin plate elements using the B-net method

    Science.gov (United States)

    Chen, Juan; Li, Chong-Jun

    2013-08-01

    The quadrilateral discrete Kirchhoff thin plate bending element DKQ is based on the isoparametric element Q8, however, the accuracy of the isoparametric quadrilateral elements will drop significantly due to mesh distortions. In a previouswork, we constructed an 8-node quadrilateral spline element L8 using the triangular area coordinates and the B-net method, which can be insensitive to mesh distortions and possess the second order completeness in the Cartesian coordinates. In this paper, a thin plate spline element is developed based on the spline element L8 and the refined technique. Numerical examples show that the present element indeed possesses higher accuracy than the DKQ element for distorted meshes.

  9. Development of a finite element model for ultrasonic NDT phenomena

    International Nuclear Information System (INIS)

    Lord, W.

    1988-01-01

    Ultrasonic NDT techniques are used extensively in the nuclear industry for the detection and characterization of defects in critical structural components such as pressure vessels and piping. The feasibility of applying finite element analysis methods to the problem of modeling ultrasound/defect interactions has been shown. Considerable work remains to be done before a full three-dimensional model is available for the prediction of realistic ultrasonic transducer signals from sound wave interaction with arbitrarily shaped defects in highly attenuative and anisotropic materials. However, a two-dimensional code has been developed that is capable of predicting finite aperture ultrasonic transducer signals associated with wave propagations in isotropic materials and that shows good qualitative agreement with corresponding experimental observations. This 2-D code has now been extended to include anisotropic materials such as centrifugally cast stainless steel (CCSS), a necessary step in the development of the full 3-D code. Results are given showing the capability of the 2-D code to predict the anomalous wave behavior normally associated with ultrasonic wave propagation in anisotropic materials. In addition, a new signal processing technique is discussed, based on the Wigner transformation, that shows promise for application to centrifugally cast stainless steel NDT problems

  10. Separations chemistry for actinide elements: Recent developments and historical perspective

    International Nuclear Information System (INIS)

    Nash, K.L.; Choppin, G.R.

    1997-01-01

    With the end of the cold war, the principal mission in actinide separations has changed from production of plutonium to cleanup of the immense volume of moderately radioactive mixed wastes which resulted from fifty years of processing activities. In order to approach the cleanup task from a proper perspective, it is necessary to understand how the wastes were generated. Most of the key separations techniques central to actinide production were developed in the 40's and 50's for the identification and production of actinide elements. Total actinide recovery, lanthanide/actinide separations, and selective partitioning of actinides from inert constituents are currently of primary concern. To respond to the modern world of actinide separations, new techniques are being developed for separations ranging from analytical methods to detect ultra-trace concentrations (for bioassay and environmental monitoring) to large-scale waste treatment procedures. In this report, the history of actinide separations, both the basic science and production aspects, is examined and evaluated in terms of contemporary priorities

  11. Organometallic chemistry of the f-elements: toward new development: cyanide ligand of f-elements

    International Nuclear Information System (INIS)

    Herve, Alexandre

    2014-01-01

    The cyanide ligand is one of the most widely used ligands in coordination chemistry of d-transition metals. The low number of cyanide complexes of lanthanides and actinides incited us to develop this field for reactivity and theoretical aspects, and also for their potentially interesting physicochemical properties. In this Ph.D., we investigated the reactivity of [An(Cot) 2 ] (An = Th, U ; Cot = C 8 H 8 2- ) and [M f (N*) 3 ] q+ (q = 0, 1; M f = Ce, U ; N* = -N(SiMe 3 ) 2 ) precursors toward the cyanide ion. The first chapter is dedicated to the synthesis and characterization of trivalent f-elements cyanide complexes [M f (N*) 3 (CN)][M], [M f (N*) 3 (CN) 2 ][M] 2 et [M f (N*) 2 (CN) 3 ][M] 2 and the cyanido-bridged binuclear compounds [{M f (N*) 3 } 2 (μ-CN)][M] (M = NR 4 , K(18-C-6)). Crystals of the bis(cyanido) uranium and cerium complexes are not isostructural since the data revealed distinct coordination modes of the CN group, through the C or N atom to the U 3+ or Ce 3+ metal center, respectively. In chapter 2, the novel silyl-amide uranium(IV) precursor [U(N*) 3 ][BPh 4 ] has been isolated, and proved to be useful for the synthesis of the cationic species [{U(N*) 3 } 2 (μ-CN)][BPh 4 ] and the neutral monocyanide [M f (N*) 3 (CN)] and anionic bis(cyanide) [M f (N*) 3 (CN) 2 ][M] derivatives. Here again, the X-ray data reveal the uncommon N coordination mode of the CN group to the U(IV) center. This global differentiation has been analyzed using density functional theory calculations. The observed preferential coordination of the cyanide ion in Ce(III)-NC, U(III)-CN and U(IV)-NC is corroborated by energetic considerations and by the comparison of DFT optimized geometries with the true crystal structures. Finally, the recent discovery of the first bent 'uranocene' species, eg [U(Cot) 2 (CN)] - , led us to compare the reactivity of the actinocenes [An(Cot) 2 ] (Th, U) in order to understand the effect of the metal electron configuration

  12. Development of nuclear standard filter elements for PWR plant

    International Nuclear Information System (INIS)

    Weng Minghui; Wu Jidong; Gu Xiuzhang; Zhang Jinghua

    1988-11-01

    Model FRX-5 and FRX-10 nuclear standard filter elements are used for the fluid clarification of the chemical and volume control system (CVCS), boron recycle system (BRS), spent fuel pit cooling system (SFPCS) and steam generator blowdown system (SGBS) in Qinshan Nuclear Power Plant. The radioactive contaminant, fragment of resin and impurity are collected by these filter elements, The core of filter elements consists of polypropylene frames and paper filter medium bonded by resin. A variety of filter papers are tested for optimization. The flow rate and comprehensive performance have been measured in the simulation condition. The results showed that the performance and lifetime have met the designing requirements. The advantages of the filter elements are simple in manufacturing, less expense and facilities for waste-disposal. At present, some of filter elements have been produced and put in operation

  13. Status and aspects of fuel element development for advanced high-temperature reactors in the FRG

    International Nuclear Information System (INIS)

    Nickel, H.; Balthesen, E.

    1975-01-01

    In the FRG three basic fuel element designs for application in high temperature gas cooled reactors are being persued: the spherical element, the graphite block element, and the moulded block element (monolith). This report gives the state of development reached with the three types of elements but also views their specific merits and performance margin and presents aspects of their future development potential for operation in advanced HTGR plants. The development of coated feed and breed particles for application in all HTGR fuel elements is treated in more detail. Summarizing it can be said that all the fuel elements as well as their components have proved their aptitude for the dual cycle systems in numerous fuel element and particle performance tests. To adapt these fuel elements and coated particles for advanced reactor concepts and to develop them up to full technical maturity further testing is still necessary, however. Ways of overcoming problems arising from the more stringent requirements are shown. (orig.) [de

  14. Development of a finite element model of decompressive craniectomy.

    Directory of Open Access Journals (Sweden)

    Tim L Fletcher

    Full Text Available Decompressive craniectomy (DC, an operation whereby part of the skull is removed, is used in the management of patients with brain swelling. While the aim of DC is to reduce intracranial pressure, there is the risk that brain deformation and mechanical strain associated with the operation could damage the brain tissue. The nature and extent of the resulting strain regime is poorly understood at present. Finite element (FE models of DC can provide insight into this applied strain and hence assist in deciding on the best surgical procedures. However there is uncertainty about how well these models match experimental data, which are difficult to obtain clinically. Hence there is a need to validate any modelling approach outside the clinical setting. This paper develops an axisymmetric FE model of an idealised DC to assess the key features of such an FE model which are needed for an accurate simulation of DC. The FE models are compared with an experimental model using gelatin hydrogel, which has similar poro-viscoelastic material property characteristics to brain tissue. Strain on a central plane of the FE model and the front face of the experimental model, deformation and load relaxation curves are compared between experiment and FE. Results show good agreement between the FE and experimental models, providing confidence in applying the proposed FE modelling approach to DC. Such a model should use material properties appropriate for brain tissue and include a more realistic whole head geometry.

  15. The 2015 Dietary Guidelines Advisory Committee Scientific Report: Development and Major Conclusions.

    Science.gov (United States)

    Millen, Barbara E; Abrams, Steve; Adams-Campbell, Lucile; Anderson, Cheryl Am; Brenna, J Thomas; Campbell, Wayne W; Clinton, Steven; Hu, Frank; Nelson, Miriam; Neuhouser, Marian L; Perez-Escamilla, Rafael; Siega-Riz, Anna Maria; Story, Mary; Lichtenstein, Alice H

    2016-05-01

    The Dietary Guidelines for Americans (DGA) is published every 5 y jointly by the Department of Health and Human Services (HHS) and the USDA and provides a framework for US-based food and nutrition programs, health promotion and disease prevention initiatives, and research priorities. Summarized in this report are the methods, major conclusions, and recommendations of the Scientific Report of the 2015 US Dietary Guidelines Advisory Committee (DGAC). Early in the process, the DGAC developed a conceptual model and formulated questions to examine nutritional risk and determinants and impact of dietary patterns in relation to numerous health outcomes among individuals aged ≥2 y. As detailed in the report, an expansive, transparent, and comprehensive process was used to address each question, with multiple opportunities for public input included. Consensus was reached on all DGAC's findings, including each conclusion and recommendation, and the entire report. When research questions were answered by original systematic literature reviews and/or with existing, high-quality expert reports, the quality and strength of the evidence was formally graded. The report was organized around the following 5 themes: 1) food and nutrient intakes and health: current status and trends; 2) dietary patterns, foods and nutrients, and health outcomes; 3) diet and physical activity behavior change; 4) food and physical activity environments; and 5) food sustainability and food safety. The following 3 cross-cutting topics were addressed: 1) sodium, 2) saturated fat, and 3) added sugars. Physical activity recommendations from recent expert reports were endorsed. The overall quality of the American diet was assessed to identify overconsumed and underconsumed nutrients of public health concern. Common food characteristics of healthy dietary patterns were determined. Features of effective interventions to change individual and population diet and physical activity behaviors in clinical, public

  16. The development of fuel elements for boiling water reactors

    International Nuclear Information System (INIS)

    Holzer, R.; Kilian, P.

    1984-01-01

    The longevity of today's standard fuel elements constitutes a sound basis for designing advanced fuel elements for higher discharge burnups. Operating experience as well as postirradiation examinations of discharged fuel elements indicate that the technical limits have not reached by far. However, measures to achieve an economic and reliable fuel cycle are not restricted to the design of fuel elements, but also extend into such fields as fuel management and the mode of reactor operation. Fuel elements can be grouped together in zones in the core as a function of burnup and reactivity. The loading scheme can be aligned to this approach by concentrating on typical control rod positions. Reloads can also be made up of two sublots of fuel elements with different gadolinium contents. Longer cycles, e.g., of eighteen instead of twelve months, are easy to plan reactivitywise by increasing the quantity to be replaced from at present one quarter to one third. In fuel elements designed for higher burnups, the old scheme of reloading one quarter of the fuel inventory can be retained. The measures already introduced or in the planning stage incorporate a major potential for technical and economic optimization of the fuel cycle in boiling water reactors. (orig.) [de

  17. Spectral/ hp element methods: Recent developments, applications, and perspectives

    Science.gov (United States)

    Xu, Hui; Cantwell, Chris D.; Monteserin, Carlos; Eskilsson, Claes; Engsig-Karup, Allan P.; Sherwin, Spencer J.

    2018-02-01

    The spectral/ hp element method combines the geometric flexibility of the classical h-type finite element technique with the desirable numerical properties of spectral methods, employing high-degree piecewise polynomial basis functions on coarse finite element-type meshes. The spatial approximation is based upon orthogonal polynomials, such as Legendre or Chebychev polynomials, modified to accommodate a C 0 - continuous expansion. Computationally and theoretically, by increasing the polynomial order p, high-precision solutions and fast convergence can be obtained and, in particular, under certain regularity assumptions an exponential reduction in approximation error between numerical and exact solutions can be achieved. This method has now been applied in many simulation studies of both fundamental and practical engineering flows. This paper briefly describes the formulation of the spectral/ hp element method and provides an overview of its application to computational fluid dynamics. In particular, it focuses on the use of the spectral/ hp element method in transitional flows and ocean engineering. Finally, some of the major challenges to be overcome in order to use the spectral/ hp element method in more complex science and engineering applications are discussed.

  18. The WCO/IAEA technical committee meeting to develop guidance related to illicit trafficking

    Energy Technology Data Exchange (ETDEWEB)

    Weil, L [Bundesamt fuer Strahlenschutz, Salzgitter (Germany)

    1997-07-01

    Following the initiative of the Director General of the International Atomic Energy Agency, Dr. Hans Blix, of September 1995 and the subsequent resolution of the 38. session of the General Conference, the IAEA and the World Customs Organization jointly undertook action to deal with the problems that can be caused by the illicit movement of radioactive materials. The ``Illicit Trafficking Programme``, co-sponsored by the two organizations aims at developing close co-operation between the Member States` radiation and nuclear safety competent authorities and their border control and customs authority counterparts. The main elements of this programme are: (1) the development of a guidance document covering the prevention and detection of unauthorized movements of radioactive materials as well as the proper response to such activities; (2) the definition of the terms for a pilot study to test border monitoring equipment under field conditions; and (3) the creation of an IAEA/WCO training module for border control and customs officers.

  19. The WCO/IAEA technical committee meeting to develop guidance related to illicit trafficking

    International Nuclear Information System (INIS)

    Weil, L.

    1997-07-01

    Following the initiative of the Director General of the International Atomic Energy Agency, Dr. Hans Blix, of September 1995 and the subsequent resolution of the 38. session of the General Conference, the IAEA and the World Customs Organization jointly undertook action to deal with the problems that can be caused by the illicit movement of radioactive materials. The ''Illicit Trafficking Programme'', co-sponsored by the two organizations aims at developing close co-operation between the Member States' radiation and nuclear safety competent authorities and their border control and customs authority counterparts. The main elements of this programme are: (1) the development of a guidance document covering the prevention and detection of unauthorized movements of radioactive materials as well as the proper response to such activities; (2) the definition of the terms for a pilot study to test border monitoring equipment under field conditions; and (3) the creation of an IAEA/WCO training module for border control and customs officers

  20. 77 FR 76164 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-12-26

    ... atmospheric pollution --Development of international measures for minimizing the transfer of invasive aquatic... pollution hazards of chemicals and preparation of consequential amendments --Additional guidelines for... DEPARTMENT OF STATE [Public Notice 8133] Shipping Coordinating Committee; Notice of Committee...

  1. Development and testing of the EDF-2 reactor fuel element

    International Nuclear Information System (INIS)

    Delpeyroux, P.

    1964-01-01

    This technical report reviews the work which has been necessary for defining the EDF-2 fuel element. After giving briefly the EDF-2 reactor characteristics and the preliminary choice of parameters which made it possible to draw up a draft plan for the fuel element, the authors consider the research proper: - Uranium studies: tests on the passage into the β phase of an internal crown of a tube, bending of the tube under the effect of a localized force, welding of the end-pellets and testing for leaks. The resistance of the tube to crushing and of the pellets to yielding under the external pressure have been studied in detail in another CEA report. - Can studies: conditions of production and leak proof testing of the can, resistance of the fins to creep due to the effect of the gas flow. - Studies of the extremities of the element: creep under compression and welding of the plugs to the can. - Cartridge studies: determination of the characteristics of the can fuel fixing grooves and of the canning conditions, verification of the resistance of the fuel element to thermal cycling, determination of the temperature drop at the can-fuel interface dealt with in more detail in another CEA report. - Studies of the whole assembly: this work which concerns the graphite jacket, the support and the cartridge vibrations has been carried out by the Mechanical and Thermal Study Service (Mechanics Section). In this field the Fuel Element Study Section has investigated the behaviour of the centering devices in a gas current. The outcome of this research is the defining of the plan of the element the production process and the production specifications. The validity of ail these out-of-pile tests will be confirmed by the in-pile tests already under way and by irradiation of the elements in the EDF-2 reactor itself. In conclusion the programme is given for improving the fuel element and for defining the fuel element for the second charge. (authors) [fr

  2. Developments in Dynamic Analysis for quantitative PIXE true elemental imaging

    International Nuclear Information System (INIS)

    Ryan, C.G.

    2001-01-01

    Dynamic Analysis (DA) is a method for projecting quantitative major and trace element images from PIXE event data-streams (off-line or on-line) obtained using the Nuclear Microprobe. The method separates full elemental spectral signatures to produce images that strongly reject artifacts due to overlapping elements, detector effects (such as escape peaks and tailing) and background. The images are also quantitative, stored in ppm-charge units, enabling images to be directly interrogated for the concentrations of all elements in areas of the images. Recent advances in the method include the correction for changing X-ray yields due to varying sample compositions across the image area and the construction of statistical variance images. The resulting accuracy of major element concentrations extracted directly from these images is better than 3% relative as determined from comparisons with electron microprobe point analysis. These results are complemented by error estimates derived from the variance images together with detection limits. This paper provides an update of research on these issues, introduces new software designed to make DA more accessible, and illustrates the application of the method to selected geological problems.

  3. [Responsibilities of ethics committees].

    Science.gov (United States)

    von Bergmann, K

    2000-05-01

    Increasing numbers of clinical research projects are submitted to ethical committees (institutional review boards) for approval. New therapeutic developments have to be evaluated by these committees to protect patients/volunteers. Thus, the responsibility of ethical committees is increasing. The "Nürnberger Kodex" and the "Declaration of Helsinki" are the background for these evaluations. According to the German drug law the physician is obligated by law to submit the protocol to such a committee. In addition, local state physician authorities require such a procedure. Important considerations during the review process besides ethical aspects are the informed consent, which should be written in an understandable form, and the obligations of the insurance.

  4. The periodic system of chemical elements: old and new developments

    International Nuclear Information System (INIS)

    Kibler, M.

    1987-09-01

    Some historical facts about the construction of a periodic system of chemical elements are reviewed. The Madelung rule is used to generate an unusual format for the periodic table. Following the work of Byakov, Kulakov, Rumer and Fet, such a format is further refined on the basis of a chain of groups starting with SU(2)xS0(4.2)

  5. Development of synthetic graphite resistive elements for sintering furnace

    International Nuclear Information System (INIS)

    Otani, C.; Rezende, Mirabel C.; Polidoro, H.A.; Otani, S.

    1987-01-01

    The synthetic graphites have been produced using lignin coke, natural graphite and phenolic resin. The bulk density, porosity, flexural strength and eletrical resistivity measurements have been performed on specimens at about 2400 0 C. The performance of these materials, as heating elements, was evaluated in a sintering furnace prototype. This paper reports the fabrication process and the experimental results. (Author) [pt

  6. Design, development and use of the finite element machine

    Science.gov (United States)

    Adams, L. M.; Voigt, R. C.

    1983-01-01

    Some of the considerations that went into the design of the Finite Element Machine, a research asynchronous parallel computer are described. The present status of the system is also discussed along with some indication of the type of results that were obtained.

  7. Recent developments concerning the discovery of elements 101-111

    International Nuclear Information System (INIS)

    Greenwood, N.N.

    1997-01-01

    The addition of eleven new elements (Z=101-111) to the Periodic Table during the past 40 years has involved outstanding feats of intellectual and experimental virtuosity. Some of the discoveries have been widely accepted but others have been hotly contested and this has led to distressingly persistent disagreements concerning priority. For this reason IUPAC and IUPAP (Physics) set up a joint Transfermium Working Group (TWG) in 1987 to recommend ''the criteria that must be satisfied for the discovery of a new element to be recognised'' and to apply these criteria to questions of priority in the discovery of the transfermium elements (Z > 100). After several years of detailed work the TWG published their extensive studies and conclusions, and these have been accepted by both IUPAC and IUPAP. Many subtle and difficult points were considered and these will be discussed in this lecture together with the TWG's final recommendations, which have been widely though not universally accepted by the scientific community. The separate question of names and symbols for the new elements with Z > 103 has not yet been finally resolved but will be briefly discussed. (Author)

  8. Full Development Of Pseudopotentials That Work For All Elements ...

    African Journals Online (AJOL)

    (1982) as well as the prescription of Pattnaik et al.(1979) which eliminated the numerical instability problems. The liquid metal resistivity is evaluated using Simpson's rule. Keywords: Pseudopotential, liquid metal resistivity, matrix element, linear coefficients, inverse orthogonality transformation. Nigerian Journal of Physics ...

  9. Recent development in the ASME O and M committee codes, standards, and guides

    International Nuclear Information System (INIS)

    Rowley, C.W.

    1999-01-01

    The ASME O and M Committee continues to expand and update its code, standards, and guides as contained in the ASME OM Code and the ASME OM Standards/Guides. This paper will describe recent changes to these two ASME documents, including technical inquiries, code cases, and the major reformat of the ASME OM Code 1998 Edition. Also two new Parts to the ASME OM S/G will be discussed: OM Part 23 and OM Part 24, which are close to being initially published. A third new Part to the ASME OM S/G has been authorized and has recently started to get organized: Part 26, 'Thermal Calibration of RTDs'. In addition this paper will describe the future plans for these two documents as provided in the O and M Committee Strategic Plan. (author)

  10. The 2nd (Transnuklear) investigations committee - state of development and evaluation

    International Nuclear Information System (INIS)

    Harries, K.

    1990-01-01

    The investigations committee sees no reason to give up the peaceful utilization of nuclear energy in the Federal Republic of Germany or in any other country where conditions are suitable. Even the events which occurred in this context and were greatly exaggerated do not lead to a different conclusion. Operators, staff and ministries must handle these matters with strict accuracy, diligence and sensitivity. This goes for every issue in public and economic life and especially for nuclear energy. (orig./HSCH) [de

  11. Development of failed element monitoring system for PWR

    International Nuclear Information System (INIS)

    Liu Yupu; Liu Haojie

    2005-01-01

    Aiming at the existent problems of failed element monitoring system in the PWR, the detector, the spiral tube, the neutron-moderator and the shielding of neutron bas improved on in this task. These improvements decrease the backgrounds effectively, raise the work stability of the detectors and resolve the failed element error action problem which can not be resolved for the long time, and the detecting sensitivity is raise ten times. The γ-ray detector is arranged spiral with outside, so the γ-rays with shorter half-life can be detected. The structure of gross gamma detection station has improved, so the solid angle is expanded, the transmissivity of γ-rays and β-rays are increased, and the ratio of signal to background is raised. The measurement instrument has been intellectualized. This system is above criticism for the users in operation. (authors)

  12. Nuclear fuels and development of nuclear fuel elements

    International Nuclear Information System (INIS)

    Sundaram, C.V.; Mannan, S.L.

    1989-01-01

    Safe, reliable and economic operation of nuclear fission reactors, the source of nuclear power at present, requires judicious choice, careful preparation and specialised fabrication procedures for fuels and fuel element structural materials. These aspects of nuclear fuels (uranium, plutonium and their oxides and carbides), fuel element technology and structural materials (aluminium, zircaloy, stainless steel etc.) are discussed with particular reference to research and power reactors in India, e.g. the DHRUVA research reactor at BARC, Trombay, the pressurised heavy water reactors (PHWR) at Rajasthan and Kalpakkam, and the Fast Breeder Test Reactor (FBTR) at Kalpakkam. Other reactors like the gas-cooled reactors operating in UK are also mentioned. Because of the limited uranium resources, India has opted for a three-stage nuclear power programme aimed at the ultimate utilization of her abundant thorium resources. The first phase consists of natural uranium dioxide-fuelled, heavy water-moderated and cooled PHWR. The second phase was initiated with the attainment of criticality in the FBTR at Kalpakkam. Fast Breeder Reactors (FBR) utilize the plutonium and uranium by-products of phase 1. Moreover, FBR can convert thorium into fissile 233 U. They produce more fuel than is consumed - hence, the name breeders. The fuel parameters of some of the operating or proposed fast reactors in the world are compared. FBTR is unique in the choice of mixed carbides of plutonium and uranium as fuel. Factors affecting the fuel element performance and life in various reactors e.g. hydriding of zircaloys, fuel pellet-cladding interaction etc. in PHWR and void swelling; irradiation creep and helium embrittlement of fuel element structural materials in FBR are discussed along with measures to overcome some of these problems. (author). 15 refs., 9 tabs., 23 figs

  13. Development of experimental methods for measuring fuel elements burnup

    International Nuclear Information System (INIS)

    PEREDA, C; HENRIQUEZ, C; NAVARRO, G; TORRES, H; KLEIN, J; CALDERON, D; MEDEL, J; MUTIS, O; DAIE, J; ITURRIETA, L; LONCOMILLA, M; ZAMBRANO, J; KESTELMAN, A

    2003-01-01

    This paper is a summary of the work carried out during the last two years in fuel burning measurements at RECH-1 for different enrichments, cooling times and burning rates. The measurements were made in two gamma-spectrometric facilities, one is installed in a hot cell and the other inside of the secondary pool of the RECH-1, where the element is under 2 meters of water. The hot cell measurements need at least 100 cooling days because of the problems generated by the transport of highly active fuel elements from the Reactor to the cell. This was the main reason for using the in-pool facility because of its capability to measure the burning of fuel elements without having to wait so long, that is with only 5 cooling days. The accumulated experience in measurements achieved in both facilities and the encouraging results show that this measuring method is reliable. The results agreed well with those obtained using the reactor's physics codes, which was the way they were obtained previously (Cw)

  14. Development library of finite elements for computer-aided design system of reed sensors

    Science.gov (United States)

    Kozlov, A. S.; Shmakov, N. A.; Tkalich, V. L.; Labkovskaia, R. I.; Kalinkina, M. E.; Pirozhnikova, O. I.

    2018-05-01

    The article is devoted to the development of a modern highly reliable element base of devices for security and fire alarm systems, in particular, to the improvement of the quality of contact cores (reed and membrane) of reed sensors. Modeling of elastic sensitive elements uses quadrangular elements of plates and shells, considered in the system of curvilinear orthogonal coordinates. The developed mathematical models and the formed finite element library are designed for systems of automated design of reed switch detectors to create competitive devices alarms. The finite element library is used for the automated system production of reed switch detectors both in series production and in the implementation of individual orders.

  15. Interdependence: Ninth and Newest Critical Element for 4-H Positive Youth Development

    Directory of Open Access Journals (Sweden)

    Kirk A. Astroth

    2014-09-01

    Full Text Available For the past 15 years, a list of eight critical elements has provided a strong foundation for articulating the positive youth development focus of 4-H programs and efforts. Now it is time to revisit this list and update the critical elements for positive youth development. Interdependence is proposed as a 9th critical element that should be included. Research is cited for the importance of this element that was not included in the original list in 1998, and a call is made for a national think tank to update the critical elements.

  16. HIV/AIDS research conducted in the developing world and sponsored by the developed world: reporting of research ethics committee review in two countries.

    Science.gov (United States)

    Chin, Lisa Judy; Rifai-Bashjawish, Hoda; Kleinert, Kelly; Saltman, Alexandra; Leu, Cheng-Shiun; Klitzman, Robert

    2011-09-01

    We explored how often journal articles reporting HIV research sponsored by a developed country, but conducted in a developing country, mention research ethics committee (REC) approval from both countries, and what factors are involved. Of all such 2007 articles on Medline conducted in one of four developing countries (N = 154), only 52% mentioned such dual approval. Mention of dual vs. single approval was more likely among articles with ≥ 50% sponsor country authors, and the United States as the sponsor country. Also, dual approval was more likely among articles that mentioned informed consent and funding, had ≥ 50% sponsor country authors, were biomedical (vs. psychosocial), and appeared in journals adopting International Committee Medical Journal Editors (ICMJE) guidelines. Dual approval was thus obtained in only half of the articles and was associated with ethical and logistic issues, indicating the need for clearer and more universally accepted guidelines.

  17. Competencies for Student Leadership Development in Doctor of Pharmacy Curricula to Assist Curriculum Committees and Leadership Instructors

    Science.gov (United States)

    Traynor, Andrew P.; Boyle, Cynthia J.

    2013-01-01

    Objective. To assist curriculum committees and leadership instructors by gathering expert opinion to define student leadership development competencies for pharmacy curricula. Methods. Twenty-six leadership instructors participated in a 3-round, online, modified Delphi process to define competencies for student leadership development in pharmacy curricula. Round 1 asked open-ended questions about leadership knowledge, skills, and attitudes. Round 2 grouped responses for agreement rating and comment. Round 3 allowed rating and comment on competencies not yet meeting consensus, which was prospectively set at 80%. Results. Eleven competencies attained 80% consensus or higher and were grouped into 3 areas: leadership knowledge, personal leadership commitment, and leadership skill development. Connections to contemporary leadership development literature were outlined for each competency as a means of verifying the panel’s work. Conclusions. The leadership competencies will aid students in addressing: What is leadership? Who am I as a leader? What skills and abilities do I need to be effective? The competencies will help curriculum committees and leadership instructors to focus leadership development opportunities, identify learning assessments, and define program evaluation. PMID:24371346

  18. Competencies for student leadership development in doctor of pharmacy curricula to assist curriculum committees and leadership instructors.

    Science.gov (United States)

    Janke, Kristin K; Traynor, Andrew P; Boyle, Cynthia J

    2013-12-16

    To assist curriculum committees and leadership instructors by gathering expert opinion to define student leadership development competencies for pharmacy curricula. Twenty-six leadership instructors participated in a 3-round, online, modified Delphi process to define competencies for student leadership development in pharmacy curricula. Round 1 asked open-ended questions about leadership knowledge, skills, and attitudes. Round 2 grouped responses for agreement rating and comment. Round 3 allowed rating and comment on competencies not yet meeting consensus, which was prospectively set at 80%. Eleven competencies attained 80% consensus or higher and were grouped into 3 areas: leadership knowledge, personal leadership commitment, and leadership skill development. Connections to contemporary leadership development literature were outlined for each competency as a means of verifying the panel's work. The leadership competencies will aid students in addressing: What is leadership? Who am I as a leader? What skills and abilities do I need to be effective? The competencies will help curriculum committees and leadership instructors to focus leadership development opportunities, identify learning assessments, and define program evaluation.

  19. Nature Elements and Fundamental Motor Skill Development Opportunities at Five Elementary School Districts in British Columbia.

    Science.gov (United States)

    Lim, Christopher; Donovan, Andrew M; Harper, Nevin J; Naylor, Patti-Jean

    2017-10-24

    The majority of Canadian children are not physically active enough for healthy development. School playgrounds are a primary location to promote physical activity and motor skill practice. The benefits of children's play in nature have also been highlighted, but few studies have evaluated children's access and exposure to nature for play on school grounds. This study examined children's access to nature on school grounds and the opportunities afforded by those natural elements for motor skill practice. Extensive naturescapes (multiple nature elements in one setting) were not common, and natural elements were limited, ranging from 1.97 to 5.71 elements/school. The most common element was a forested area (26.5% of all natural elements identified). In comparison to built structures, the number of natural elements was low. Some elements differed between school districts and appeared to be related to local geography and terrain (hilly, rocky terrain, tidal flats, etc.). Our assessment showed that naturescape elements afforded opportunities for the development of some key fundamental motor skills (FMS), specifically, locomotor and stability skills, but opportunities to develop manipulative skills were limited. To maximize potential FMS development, physical literacy, and psycho-social benefits, additional elements or more comprehensive multi-element naturescapes and facilitation (social or environmental) are recommended.

  20. Development of environmental education system using online element analysis

    International Nuclear Information System (INIS)

    Niizeki, T.; Yoshihara, T.; Tsuchiya, K.; Kawasaki, K.; Komiya, K.

    2007-01-01

    We have constructed a network system which enables one to access and analyze environmental data obtained at different and distant laboratories. As a preliminary feasibility test of the system, we studied the elements in the water of the Tesio River using PIXE and ion chromatography. Students used the data online to carry out analysis via internet. We found two factors with different features in calcium from the factor analysis. The comparison of the specific result and relevant geology information has revealed a remarkable presence of Ca 2+ which might come from dissolution of limestone in the upper Tesio River. PIXE data gave crucial information to draw such a conclusion. The present system has been found useful in environmental education in universities, online sharing of PIXE data in particular. (author)

  1. Development of highly heat-resistant target elements for fusion reactors; Entwicklung hochwaermebestaendiger Targetelemente fuer Fusionsreaktoren

    Energy Technology Data Exchange (ETDEWEB)

    Boscary, Jean; Stadler, R.; Greuner, H.; Smirnow, M.; Drescher, N.; Boeswirth, B.; Tretter, J.; Mendelevitch, B.

    2016-06-15

    The following topics are dealt with: Scientific and technical results for divertor components (''target elements'') of the Wendelstein 7-X facility, development of nondestructive test procedures at the cooling structures, development of an automatized procedure for the visual inspection, the ''scraper''-element. (HSI)

  2. Application and development of probabilistic safety assessment for nuclear power plant operations. Report of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    The Technical Committee Meeting on Procedures for Use of PSA for Optimizing Operational Limits and Conditions for Nuclear Power Plants was held in Barcelona from 20 to 23 September 1993 to serve as a forum for discussion of the development of methods and approaches for PSA applications. The meeting was co-sponsored by the IAEA and the Asco and Vandellos nuclear power plants in Spain and was attended by more than 85 participants from 23 countries. The 35 papers and presentations reflected the extent of activities in this area worldwide. Most of the papers discuss PSA application programmes and/or specific methods and approaches used. This TECDOC, which was prepared by the participants of the Technical Committee meeting, summarizes the insights gained from the papers and plenary discussions. It also presents the conclusions of the work of three working groups which discussed the advantages and limitations of specific aspects of PSA. It provides an up-to-date description of computerized tools for risk monitoring in used or under development in Member States. It is hoped that this report will be a useful source of information on PSA applications. Refs, figs, tabs.

  3. A report of the overall working group of the AEC Committee on Development of Advanced Power Reactors

    International Nuclear Information System (INIS)

    1979-01-01

    The AEC Committee on Development of Advanced Power Reactors was set up in April, 1978, following on the previous AEC Special Committee on Development of Advanced Power Reactors, in order to study on the complementary power reactors between current LWRs and future FBRs. The subjects of study by the overall working group are the status of advanced power reactors in views of the nuclear fuel cycle, the impacts on industries, the selection of reactor types under present international circumstances, and the evaluation of advanced power reactors in their technology and economy. The following matters are described: evaluations in view of the nuclear fuel cycle, i.e. the features of the ATR of Japan and CANDU reactors of Canada; international problems concerning nuclear nonproliferation and securing of uranium; problems in the diversification of power reactor types concerning the expenditure and technology; problems of technology in the ATR of Japan, CANDU reactors of Canada and Pu utilization for LWRs; and the economy of D 2 O power reactors, i.e. the ATR of Japan and CANDU reactors of Canada. (J.P.N.)

  4. Are impact assessment procedures actually promoting sustainable development? Institutional perspectives on barriers and opportunities found in the Swedish committee system

    International Nuclear Information System (INIS)

    Nykvist, Bjoern; Nilsson, Mans

    2009-01-01

    Impact assessment frameworks are gaining increasing attention as a procedure to integrate sustainability concerns in European and national policy-making. The gap between political visions on sustainable development and the reality of policy-making is, however, still pronounced, and a very limited range and scope of available assessment methods are used in practice. This study examines why this pattern prevails, in this case within the Swedish Committees of Inquiry, with a focus on institutional factors determining the function of Impact Assessments. The findings suggest that assessment procedures have little value when not accompanied by clear specific instructions on priorities. A range of institutional constraints emerge in the interface between policy makers and knowledge providers in committees. Dominant professional, organisational, and disciplinary cultures constrain the assessment, and socio-economic priorities are by tradition most important. Based on our analysis, we conclude that to enhance the potential for integrating sustainability concerns, it seems less fruitful to develop more advanced and complex assessment frameworks and models than strengthening institutional arenas for social learning. Such arenas should be; defined by a broad mandate and instructions, characterised by key personal skills and resources, and build institutional capacity for a range of stakeholders to engage with them

  5. Technological capacity as an element of development strategy

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, C; Kamenetzky, M; Ramesh, J

    1980-03-01

    The idea that science and technology transfers would result in the development of indigenous infrastructures able to cope with social problems overlooked the costs and uncertainties of applying science and technology to modernizing industry. A local capacity to deal with development is not emerging in developing countries and the role of small-scale technology has been largely ignored. A technological capacity needs to be built from within the public and private sectors, with adequate financial and technical support for small production units and adequate sheltering for long-term problems. Public policies are needed which can assess the fitness of technological institutions and policies to develop a capacity for making technological decisions that are compatible with local supply. 12 references. (DCK)

  6. Tariff policy in Romania. Strategic elements for developing electricity supply

    International Nuclear Information System (INIS)

    Manea, D.; Indre, G.; Gugu, F.; Vilceanu, M.

    1996-01-01

    Starting from considerations of economic mechanisms as the main tools for developing electricity supply technology in Romania. The guidelines of Romanian policy for electricity rates and tariffs are presented. The main constraints and difficulties of designing rates and tariffs in a transitional economy are analysed. Models are presented for strategic development of rates and tariffs, and the role of tariffs is discussed in promoting electric technologies in Romanian social and economic activities. (author)

  7. Innovative potential as element of competitive development of the enterprise

    Directory of Open Access Journals (Sweden)

    Kruglova Olga Valentinovna

    2014-05-01

    Full Text Available Scientific approaches and the methodical tools, allowing to form the strategic capacity of the commercial organizations taking into account its innovative component which in turn allows to define possibilities of the company with an acceptable accuracy are considered, and in the subsequent to consider and use them when developing competitive strategy of the development. These calculations are approved at the enterprises of the Nizhny Novgorod Region and proved the practical and economic importance.

  8. Developing the basic elements for breast diagnostic programs In Ghana

    International Nuclear Information System (INIS)

    Antwi-Bosiako, F.

    2012-04-01

    Breast cancer is the most common cancer affecting women worldwide. Women are at an increase risk of developing both physical and psychological morbidity after diagnosis. Findings show that women who were diagnosed with breast cancer are at risk of developing several psychological morbidities such as depression, anxiety, fatigue, negative thoughts, suicidal thoughts, fear of dying, sense of aloneness, sexual and body image problems, as well as an overall decrease in the quality of life. The objective of this project is to review the available literature on breast cancer diagnostic programs in the developed world and the developing countries and develop one for Ghana. Lack of resources and basic infrastructure and data on breast cancer cases, make it difficult to have access to breast cancer screening, early diagnosis, treatment or palliative care. In all the studies reviewed, a trial population of about ten thousand women aging between 50-70 years were used for three years period. Mammography, Clinical Breast-Examination (CBE) and Breast Self-Examination (BSE) methods were used to screen the women. Assessment, biopsies and treatment of palpable screen-detected abnormalities were performed using Fine Needle aspiration (FNA) and fine needle aspiration cytology (FNAC). High-quality single medio-lateral oblique view mammography has been shown to be an effective method in reducing mortality from breast cancer and we conclude that initially this preferred option for the development of breast diagnostic program. There is no evidence that clinical breast-examination or breast self-examination is effective when used alone. These methods have some value when used in combination with mammography, but their contribution requires further assessment. From available data, and the cost involved in some trials conducted in some of the developed countries, the Ghanaian programme should be based on creation of public awareness about breast cancer disease. (author)

  9. C A R A fuel element for Atucha nuclear power plants and development plan

    International Nuclear Information System (INIS)

    Brasnarof, D. O; Marino, A. C; Bianchi, D; Giorgis M A; Orlando, O; Munoz, C; Taboada, H; Florido, P. C

    2006-01-01

    This paper presents the current state and the development plan of the C A R A fuel element.Main activities were carried out towards to welding of the end plates of the C A R A fuel element by a new process, and the assembling and hanging of the C A R A fuel element in its Atucha configuration, by using an external basket [es

  10. Understanding And Developing Innovative Products And Services: The Essential Elements

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles

    2006-01-01

    Innovation is synonymous with successful development and implementation, and therefore peculiar to innovation is that it has to prove itself on the market before we can deem it innovative. This paper suggests an approach for understanding the principles for innovative products which is based, not...

  11. Development of efficient finite elements for structural integrity analysis of solid rocket motor propellant grains

    International Nuclear Information System (INIS)

    Marimuthu, R.; Nageswara Rao, B.

    2013-01-01

    Solid propellant rocket motors (SRM) are regularly used in the satellite launch vehicles which consist of mainly three different structural materials viz., solid propellant, liner, and casing materials. It is essential to assess the structural integrity of solid propellant grains under the specified gravity, thermal and pressure loading conditions. For this purpose finite elements developed following the Herrmann formulation are: twenty node brick element (BH20), eight node quadrilateral plane strain element (PH8) and, eight node axi-symmetric solid of revolution element (AH8). The time-dependent nature of the solid propellant grains is taken into account utilizing the direct inverse method of Schepary to specify the effective Young's modulus and Poisson's ratio. The developed elements are tested considering various problems prior to implementation in the in-house software package (viz., Finite Element Analysis of STructures, FEAST). Several SRM configurations are analyzed to assess the structural integrity under different loading conditions. Finite element analysis results are found to be in good agreement with those obtained earlier from MARC software. -- Highlights: • Developed efficient Herrmann elements. • Accuracy of finite elements demonstrated solving several known solution problems. • Time dependent structural response obtained using the direct inverse method of Schepary. • Performed structural analysis of grains under gravity, thermal and pressure loads

  12. Appraisal process as an element of historical resource development

    Directory of Open Access Journals (Sweden)

    Artur Górak

    2011-12-01

    Full Text Available The authors assume that the effects of the mechanism that is currently used to develop the archival resources in Poland are not able to meet the needs of historical sciences. They point out the reasons for this situation and come to conclusion that archival activity in Poland has become a thoughtless office chore, sometimes even a commercial service, and is not a public service any more - that is, a service for the benefit of the national culture. When it comes to development of the archival resources, the solution is not to introduce new types of sources, but to continue implementing the old standards of the mission to collect and preserve archival materials.

  13. Forest Management as an Element of Environment Development

    Science.gov (United States)

    Jaszczak, Roman; Gołojuch, Piotr; Wajchman-Świtalska, Sandra; Miotke, Mariusz

    2017-12-01

    The implementation of goals of modern forestry requires a simultaneous consideration of sustainable development of forests, protection, needs of the environment development, as well as maintaining a balance between functions of forests. In the current multifunctional forest model, rational forest management assumes all of its tasks as equally important. Moreover, its effects are important factors in the nature and environment protection. The paper presents legal conditions related to the definitions of forest management concepts and sustainable forest management. Authors present a historical outline of human's impact on the forest and its consequences for the environment. The selected aspects of forest management (eg. forest utilization, afforestation, tourism and recreation) and their role in the forest environment have been discussed.

  14. Development of nuclear transmutation technology for transuranic elements

    International Nuclear Information System (INIS)

    Mukaiyama, Takehiko

    1996-01-01

    Partitioning and Transmutation (P-T) of long-lived radioactive nuclides is conceived as the technology to improve the high-level radioactive waste management. This report discusses the incentives of P-T, generation of long-lived nuclides in fission reactors, nuclear transmutation technologies, R and D activities of the partitioning and transmutation technology development programs at JAERI and in the world. (author)

  15. Strategic Alliance Development - A Process Model A Case Study Integrating Elements of Strategic Alliances

    OpenAIRE

    Mohd Yunos, Mohd Bulkiah

    2007-01-01

    There has been enormous increase in the formation of strategic alliance and the research efforts devoted to understanding alliance development process over the last few decades. However, the critical elements that influence the each stage of alliance development are yet unexplored. This dissertation aims to fill this gap and to supplement it by introducing an integrated process model of strategic alliance development and its critical elements. The process model for strategic alliance developm...

  16. Advances in carbide fuel element development for fast reactor application

    International Nuclear Information System (INIS)

    Dienst, W.; Kleykamp, H.; Muehling, G.; Reiser, H.; Steiner, H.; Thuemmler, F.; Wedermeyer, H.; Weimar, P.

    1977-01-01

    The features of the carbide fuel development programme are reviewed and evaluated. Single pin and bundle irradiations are carried out under thermal, epithermal and fast flux conditions, the latter in the DFR and KNK-II reactors. Several fuel concepts in the region of representative SNR clad temperatures are compared by parameter and performance tests. A conservative concept is based on He-bonded 8 mm pins with (U,Pu)C pellets and a smear density of 75% TD, operating at 800 W/cm rod power and burnup to 70 MWd/kg. The preparation of mixed carbide fuels is carried out by carbothermic reduction of the oxides in different methods supported by equivalent carbon content, grain size and phase distribution analysis. The fuel for subassembly performance tests is produced in a pilot plant of 0,5 t/year capacity. Compatibility studies reveal that cladding carburization is the only chemical interaction with carbide fuels. This effect leads to a reduction in ductility of the stainless steel. Fission products apparently play no role in the compatibility behaviour. Comprehensive studies lead to reliable information on the chemical and thermodynamic state of the fuel under irradiation. The swelling of carbide fuels and the fission gas release are examined and analysed. Cladding plastic strain by fuel swelling occurs during steady-state operation because the irradiation creep is rather slow compared to oxide fuels. The cladding strain observed depends on the fuel porosity and the cladding strength. The development of carbide fuel pins is complemented by the application of comprehensive computer models. In addition to the steady-state tests power cycling and safety tests are under performance. Up to 1980 the results are summarized for the final design and specification. The development target of the present program is to fabricate several subassemblies for test operation in the SNR 300 by 1981

  17. Critical element development of standard pipe connector for remote handling

    International Nuclear Information System (INIS)

    Taguchi, Kou; Kakudate, Satoshi; Kanamori, Naokazu; Oka, Kiyoshi; Nakahira, Masataka; Obara, Kenjiro; Tada, Eisuke; Shibanuma, Kiyoshi; Seki, Masahiro

    1994-08-01

    In fusion experimental reactors such as ITER, the in-vessel components such as blanket and divertor are actively cooled and a large number of cooling pipes are located around the core of reactor, where personnel access is prohibited. Mechanical pipe connectors are highly required as standard components for easy and reliable connection/disconnection of cooling pipe by remote handling. For this purpose, a clamping chain type connector has been developed with special mechanisms such as plate springs and guide structures so as to enable concentric and axial movement of clamping chain for easy mounting and dismounting. The basic performance test of a prototypical connector for a 80-A pipe shows sufficient leak tightness and proof pressure capability as well as simple connection/disconnection operation. In addition to the clamp chain type connector, design efforts have been made to develop a quick coupling type connector and a preliminary model of air-actuated quick connector has been fabricated for further investigations. This paper gives the design concept of mechanical pipe connectors such as clamping chain type and quick coupler type, and the basic performance tests results of clamping chain type connector. (author)

  18. Developing core elements and checklist items for global hospital antimicrobial stewardship programmes: a consensus approach.

    Science.gov (United States)

    Pulcini, C; Binda, F; Lamkang, A S; Trett, A; Charani, E; Goff, D A; Harbarth, S; Hinrichsen, S L; Levy-Hara, G; Mendelson, M; Nathwani, D; Gunturu, R; Singh, S; Srinivasan, A; Thamlikitkul, V; Thursky, K; Vlieghe, E; Wertheim, H; Zeng, M; Gandra, S; Laxminarayan, R

    2018-04-03

    With increasing global interest in hospital antimicrobial stewardship (AMS) programmes, there is a strong demand for core elements of AMS to be clearly defined on the basis of principles of effectiveness and affordability. To date, efforts to identify such core elements have been limited to Europe, Australia, and North America. The aim of this study was to develop a set of core elements and their related checklist items for AMS programmes that should be present in all hospitals worldwide, regardless of resource availability. A literature review was performed by searching Medline and relevant websites to retrieve a list of core elements and items that could have global relevance. These core elements and items were evaluated by an international group of AMS experts using a structured modified Delphi consensus procedure, using two-phased online in-depth questionnaires. The literature review identified seven core elements and their related 29 checklist items from 48 references. Fifteen experts from 13 countries in six continents participated in the consensus procedure. Ultimately, all seven core elements were retained, as well as 28 of the initial checklist items plus one that was newly suggested, all with ≥80% agreement; 20 elements and items were rephrased. This consensus on core elements for hospital AMS programmes is relevant to both high- and low-to-middle-income countries and could facilitate the development of national AMS stewardship guidelines and adoption by healthcare settings worldwide. Copyright © 2018 European Society of Clinical Microbiology and Infectious Diseases. All rights reserved.

  19. Development of a scanning proton microprobe - computer-control, elemental mapping and applications

    International Nuclear Information System (INIS)

    Loevestam, Goeran.

    1989-08-01

    A scanning proton microprobe set-up has been developed at the Pelletron accelerator in Lund. A magnetic beam scanning system and a computer-control system for beam scanning and data aquisition is described. The computer system consists of a VMEbus front-end computer and a μVax-II host-computer, interfaced by means of a high-speed data link. The VMEbus computer controls data acquisition, beam charge monitoring and beam scanning while the more sophisticated work of elemental mapping and spectrum evaluations is left to the μVax-II. The calibration of the set-up is described as well as several applications. Elemental micro patterns in tree rings and bark has been investigated by means of elemental mapping and quantitative analysis. Large variations of elemental concentrations have been found for several elements within a single tree ring. An external beam set-up has been developed in addition to the proton microprobe set-up. The external beam has been used for the analysis of antique papyrus documents. Using a scanning sample procedure and particle induced X-ray emission (PIXE) analysis, damaged and missing characters of the text could be made visible by means of multivariate statistical data evaluation and elemental mapping. Also aspects of elemental mapping by means of scanning μPIXE analysis are discussed. Spectrum background, target thickness variations and pile-up are shown to influence the structure of elemental maps considerably. In addition, a semi-quantification procedure has been developed. (author)

  20. Creativity and Culture as Elements of Urban Development

    Directory of Open Access Journals (Sweden)

    Fabiane Frois B Weiler

    2018-02-01

    Full Text Available Abstract: cities are the picture of the outbreak of expressions of the processes of accumulation, consumption, circulation and production of goods plus the interaction of individuals, socially represented in classes. In general, from the adjectives and their derivations a city is constructed that articulates through its actors in constructing itself locally viable. From this perspective, this essay aims to analyze, briefly, the relations between urban development and creative economy. For this, methodologically, it is worth of a bibliographical revision about the fundamental concepts of the urban development and creative economy and repercussions of this relation. In this line, it is thought that the city when it uses creativity as an adjective must be conceived in a logic of space built to meet the particularities of the territory. And, not for the logic of competition and standardization of territory designed for global competition. The purpose of culture and creativity must break with dependence in the context of development, especially as regards the way and process as the city and its urbanization are constituted and consolidated. A Criatividade e a Cultura como Elementos do Desenvolvimento Urbano Resumo: as cidades são o retrato da eclosão das expressões dos processos de acumulação, consumo, circulação e produção de bens somados a interação de indivíduos, socialmente representados em classes. Em geral, a partir dos adjetivos e suas derivações se constrói uma cidade que se articula por meio de seus atores em construir-se viável localmente. Nessa perspectiva, este ensaio visa analisar, sucintamente, as relações entre desenvolvimento urbano e economia criativa. Para tal, metodologicamente, vale-se de uma revisão bibliográfica acerca dos conceitos fundamentais do desenvolvimento urbano e economia criativa e repercussões dessa relação. Nessa linha, pensa-se que a cidade quando emprega a criatividade como adjetivo deve ser

  1. State of the Art Report for Development of Control Element Drive Mechanism of the APR+ Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Seon; Choi, Suhn; Song, Chul Hwa

    2008-10-15

    Recently newly-developed nuclear reactors with increased safety and enhanced performance by developed countries in the nuclear area are competing in the global nuclear market. Several reactors, for example AP600 and AP1000 by Westinghouse Electric Co. in USA, EPR by Areva in Europe, APWR by Mitsubishi Heavy Industry in Japan in the pressurized power reactor, are competing to preoccupy the nuclear market during Nuclear Renaissance. Dedicated control element drive mechanism with enhanced performance and increased safety are developed for these new reactors. And load follow capability is required, and it is estimated that load follow requirement make design requirement of a control element drive mechanism harsh. It is necessary to review the current technical state of a control element drive mechanism. This work is aimed to review the design characteristics of a past and current control element drive mechanism for a nuclear reactor and to check the direction and goal of CEDM design development recently.

  2. State of the Art Report for Development of Control Element Drive Mechanism of the APR+ Reactor

    International Nuclear Information System (INIS)

    Lee, Jae Seon; Choi, Suhn; Song, Chul Hwa

    2008-10-01

    Recently newly-developed nuclear reactors with increased safety and enhanced performance by developed countries in the nuclear area are competing in the global nuclear market. Several reactors, for example AP600 and AP1000 by Westinghouse Electric Co. in USA, EPR by Areva in Europe, APWR by Mitsubishi Heavy Industry in Japan in the pressurized power reactor, are competing to preoccupy the nuclear market during Nuclear Renaissance. Dedicated control element drive mechanism with enhanced performance and increased safety are developed for these new reactors. And load follow capability is required, and it is estimated that load follow requirement make design requirement of a control element drive mechanism harsh. It is necessary to review the current technical state of a control element drive mechanism. This work is aimed to review the design characteristics of a past and current control element drive mechanism for a nuclear reactor and to check the direction and goal of CEDM design development recently

  3. A Survey of the Role of Audit Committees in Promoting Corporate Governance and Accountability in Constituency Development Fund Management: A Case Study of Nairobi Province, Kenya

    Directory of Open Access Journals (Sweden)

    Samuel Kakui Kilika

    2013-07-01

    Full Text Available The purpose of thisstudy is to present a case for the need for audit committee in Constituency DevelopmentFund to promote corporate governance and accountability in constituencydevelopment fund management in Nairobi Province, Kenya. The study provides ananalysis and critique of the extent of engagement research in the field ofcorporate governance and accountability in constituency Development Fundmanagement and present case for further research that may be directed tooutside Nairobi province. The study found that the extent of literature in thefield of corporate governance and accountability and reporting in contrast tothe field to management CDF in Nairobi had largely ignored the practice withinCDF organizations.  The study argues thatCDF can benefit from the methodological and theoretical insights of auditcommittee and other disciplines. The study suggests where further contributionsmight be made by future research endeavors engaging with audit committees withorganizations. Engaging audit committee in CDF governance and accountabilityhas the potential to improve theorizing practice and the sustainabilityperformance with organizations. Drawing on the methods and theories of otherdisciplines and the papers in the special issues (of audit committee the studypresents away forward for researchers engaging with audit committees in organizationalpracticing corporate governance and accountability.

  4. Development of a procedure for the multi-element determination of trace elements in wine by ICP-MS

    Energy Technology Data Exchange (ETDEWEB)

    Castineira, M.M.; Brandt, R.; von Bohlen, A.; Jakubowski, N. [Institut fuer Spektrochemie und Angewandte Spektroskopie e.V., Dortmund (Germany)

    2001-07-01

    An inductively coupled plasma mass spectrometric (ICP-MS) procedure has been developed for the determination of trace elements in wine. The procedure consists in simple 1+1 dilution of the wine and semi-quantitative analysis (without external calibration) using In as internal standard. Thirty-one elements at concentrations ranging from 0.1 mg mL{sup -1} to 0.5 ng mL{sup -1} can be determined by ICP-MS analysis with and without digestion. It was investigated whether a matrix effect observed for EtOH in the wine matrix can be overcome by application of a micro-concentric nebulizer with a membrane desolvator (MCN 6000). The results obtained for the MCN 6000 are compared with those obtained by use of a conventional Meinhard nebulizer. It is shown that the observed matrix effect can only be compensated by use of an internal standard for the Meinhard nebulizer, but not for the MCN 6000. Results for ICP-MS are compared with those obtained by total reflection X-ray fluorescence spectrometry (TXRF). (orig.)

  5. Development of computer-aided design system of elastic sensitive elements of automatic metering devices

    Science.gov (United States)

    Kalinkina, M. E.; Kozlov, A. S.; Labkovskaia, R. I.; Pirozhnikova, O. I.; Tkalich, V. L.; Shmakov, N. A.

    2018-05-01

    The object of research is the element base of devices of control and automation systems, including in its composition annular elastic sensitive elements, methods of their modeling, calculation algorithms and software complexes for automation of their design processes. The article is devoted to the development of the computer-aided design system of elastic sensitive elements used in weight- and force-measuring automation devices. Based on the mathematical modeling of deformation processes in a solid, as well as the results of static and dynamic analysis, the calculation of elastic elements is given using the capabilities of modern software systems based on numerical simulation. In the course of the simulation, the model was a divided hexagonal grid of finite elements with a maximum size not exceeding 2.5 mm. The results of modal and dynamic analysis are presented in this article.

  6. Development of nuclear safety class filter elements with long life and high quality

    International Nuclear Information System (INIS)

    Zhang Jinghua

    2009-04-01

    This paper describes the development on nuclear safety class filter elements with long life and high quality used for collecting radioactive contaminants, fragments of resin and impurities in primary systems of NPPs. The filter elements made of glass fibre elements are used for PWR, and of paper elements are used for PHWR. During the research, a series of tests for optimization were performed for selection of filter material and the improvement of binder. The flow rate and comprehensive performance have been measured in simulated conditions. The result shows that the application requirements for operational NPPs can be met, and the reliability and safety of the frame are also be verified. The comprehensive performance of the filter elements is equivalent to that of oversea similar products. The products have been used in NPPs in operation. (authors)

  7. Report of the evaluation by the project evaluation committee on research and development of FBR structural materials. Result intermediate evaluation in fiscal year 2002

    International Nuclear Information System (INIS)

    2003-03-01

    The project evaluation committee of FBR (Fast Breeder Reactor) and fuel cycle evaluated the problem under the evaluation method defined by the committee on the basis of material and supplementary data produced by JNC (Japan Nuclear Cycle Development Institute) and discussion. This report consists of summary, construction of the committee, investigation process, evaluation method, opinion of object, plan, research system, results, relation to practical use, public offering of results, development and others and total evaluation. Each opinion of the committee member are reported. Development of structural material is important problem of R and D of FBR. The estimation techniques of materials, high temperature structural and earthquake-resistant design techniques are evaluated to obtain the fruitful results. The remarkable results are development of materials of 316FR, using plate to reactor, estimation method of thermal striping, improvement of earthquake-resistant analysis technology, contribution to evaluation analysis of Monju second liner and basic information to develop quantity technique of material damage. (S.Y.)

  8. Development and applications of a flat triangular element for thin laminated shells

    Science.gov (United States)

    Mohan, P.

    Finite element analysis of thin laminated shells using a three-noded flat triangular shell element is presented. The flat shell element is obtained by combining the Discrete Kirchhoff Theory (DKT) plate bending element and a membrane element similar to the Allman element, but derived from the Linear Strain Triangular (LST) element. The major drawback of the DKT plate bending element is that the transverse displacement is not explicitly defined within the interior of the element. In the present research, free vibration analysis is performed both by using a lumped mass matrix and a so called consistent mass matrix, obtained by borrowing shape functions from an existing element, in order to compare the performance of the two methods. Several numerical examples are solved to demonstrate the accuracy of the formulation for both small and large rotation analysis of laminated plates and shells. The results are compared with those available in the existing literature and those obtained using the commercial finite element package ABAQUS and are found to be in good agreement. The element is employed for two main applications involving large flexible structures. The first application is the control of thermal deformations of a spherical mirror segment, which is a segment of a multi-segmented primary mirror used in a space telescope. The feasibility of controlling the surface distortions of the mirror segment due to arbitrary thermal fields, using discrete and distributed actuators, is studied. The second application is the analysis of an inflatable structure, being considered by the US Army for housing vehicles and personnel. The updated Lagrangian formulation of the flat shell element has been developed primarily for the nonlinear analysis of the tent structure, since such a structure is expected to undergo large deformations and rotations under the action of environmental loads like the wind and snow loads. The follower effects of the pressure load have been included in the

  9. Energy and water development appropriations for 1999: Part 5. Hearings before a Subcommittee of the Committee on Appropriations, House of Representatives, One Hundred Fifth Congress, Second Session

    International Nuclear Information System (INIS)

    1998-01-01

    This is part 5 of the hearings before the subcommittee on energy and water development of the committee on appropriations. Included are statements from witnesses of the Secretary of Energy, departmental administration, energy research, renewable energy, nuclear energy, Power Marketing Administration, Federal Energy Regulatory Commission, and the Nuclear Regulatory Commission

  10. Universities, Public Priorities, and the Future of Ontario. A Brief to the Standing Committee on Social Development of the Legislature of Ontario. Publication No. 83-9.

    Science.gov (United States)

    Council of Ontario Universities, Toronto.

    This brief was submitted to the Standing Committee on Social Development of the Ontario Legislature in connection with Bill 42, which is intended to limit university deficits. The following concerns are examined: current university funding levels in relation to enrollment and student demand, research responsibilities, tuition fee levels, and…

  11. Development of a surrogate model for elemental analysis using a natural gamma ray spectroscopy tool

    International Nuclear Information System (INIS)

    Zhang, Qiong

    2015-01-01

    A systematic computational method for obtaining accurate elemental standards efficiently for varying borehole conditions was developed based on Monte Carlo simulations, surrogate modeling, and data assimilation. Elemental standards are essential for spectral unfolding in formation evaluation applications commonly used for nuclear well logging tools. Typically, elemental standards are obtained by standardized measurements, but these experiments are expensive and lack the flexibility to address different logging conditions. In contrast, computer-based Monte Carlo simulations provide an accurate and more flexible approach to obtaining elemental standards for formation evaluation. The presented computational method recognizes that in contrast to typical neutron–photon simulations, where the source is typically artificial and well characterized (Galford, 2009), an accurate knowledge of the source is essential for matching the obtained Monte Carlo elemental standards with their experimental counterparts. Therefore, source distributions are adjusted to minimize the L2 difference of the Monte Carlo computed and experimental standards. Subsequently, an accurate surrogate model is developed accounting for different casing and cement thicknesses, and tool positions within the borehole. The adjusted source distributions are then utilized to generate and validate spectra for varying borehole conditions: tool position, casing and cement thickness. The effect of these conditions on the spectra are investigated and discussed in this work. Given that Monte Carlo modeling provides much lower cost and more flexibility, employing Monte Carlo could enhance the processing of nuclear tool logging data computed standards. - Highlights: • A novel computational model for efficiently computing elemental standards for varying borehole conditions has been developed. • A model of an experimental test pit was implemented in the Monte Carlo code GEANT4 for computing elemental standards.

  12. Survey research report by the hydrogen occluding alloy utilization development committee; Suiso kyuzo gokin riyo kaihatsu iinkai chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-01

    This report summarizes the FY 1984 survey research results, issued by the hydrogen occluding alloy utilization development committee. The basic property subcommittee is responsible for collecting published data related to the basic properties of metal halides as much as possible, and pigeonholing them to have the data which can contribute to development of the new alloys for basic researches and engineering applications of hydrogen occluding alloys. The subcommittee members have collected these data. The common theme subcommittee has planned to collect the P-C-T diagrams of the hydrogen occluding alloys and new alloys as much as possible, for the designs, development, production and system designs of the hydrogen occluding alloys. The P-C-T diagrams have been collected for a total of 340 types of alloys, which fall into the broad categories of Mg-based, TiFe-based, TiMn-based, other Ti-based, rare-earth-based, Zr-based, Ca-based and others. The analytical methods have been also investigated while collecting P-C-T diagrams. (NEDO)

  13. 12 CFR 1710.12 - Committees of board of directors.

    Science.gov (United States)

    2010-01-01

    ... AND URBAN DEVELOPMENT SAFETY AND SOUNDNESS CORPORATE GOVERNANCE Corporate Practices and Procedures...) Compensation committee; and (3) Nominating/corporate governance committee. [67 FR 38370, June 4, 2002...

  14. 76 FR 58519 - Risk Communication Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-09-21

    ...] Risk Communication Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS... Communication Advisory Committee. General Function of the Committee: To provide advice and recommendations to... discuss implications, for strategic communication, of recent theoretical developments on information use...

  15. Developments in uranium resources, production, demand and the environment. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2005-01-01

    Globalization has led to growing importance of the uranium production industries of the world's developing countries. Uranium supply from these countries could be increasingly important in satisfying worldwide reactor requirements over time. Along with the increasing contribution to worldwide uranium supply, the environmental impact of uranium production in developing countries has come under increasing scrutiny from the nuclear power industry, the end-users of this supply, and from communities impacted by uranium mining and processing. The papers presented at the meeting on 'Developments in Uranium Resources, Production, Demand and the Environment' provide an important overview of uranium production operations and of their environmental consequences in developing countries, as well as offering insight into future production plans and potential. Along with their increasing contribution to worldwide uranium supply, the environmental impact of uranium production in developing countries has come under increasing scrutiny from the nuclear power industry, the end users of this supply, and by communities impacted by uranium mining and processing. Therefore, the environmental consequences of uranium production were included in the meeting agenda as noted in the meeting title, 'Developments in uranium resources, production, demand and the environment'. Accordingly, the papers presented at this meeting are about evenly divided between discussions of known and potential uranium resources and uranium production technology and the environmental impact of uranium mining and processing, its related remediation technology and its costs. Though emphasis is placed on uranium programmes in developing countries, an overview of COGEMA's worldwide activities is also presented. This presentation provides insight into the strategies of arguably the Western world's most integrated and diversified uranium company, including the geographic diversity of its exploration and production

  16. Development and validation of a new kind of coupling element for wheel-hub motors

    Science.gov (United States)

    Perekopskiy, Sergey; Kasper, Roland

    2018-05-01

    For the automotive industry, electric powered vehicles are becoming an increasingly relevant factor in the competition against climate change. Application of one special example - a wheel-hub motor, for electric powered vehicle can support this challenge. Patented slotless air gap winding invented at the chair of mechatronics of the Otto von Guericke University Magdeburg has great application potential in constantly growing e-mobility field, especially for wheel-hub motors based on this technology due to its advantages, such as a high gravimetric power density and high efficiency. However, advantages of this technology are decreased by its sensibility to the loads out of driving maneuvers by dimensional variations of air gap consistency. This article describes the development and validation of a coupling element for the designed wheel-hub motor. To find a suitable coupling concept first the assembly structure of the motor was analyzed and developed design of the coupling element was checked. Based on the geometry of the motor and wheel a detailed design of the coupling element was generated. The analytical approach for coupling element describes a potential of the possible loads on the coupling element. The FEM simulation of critical load cases for the coupling element validated results of the analytical approach.

  17. Applicability of thermodynamic database of radioactive elements developed for the Japanese performance assessment of HLW repository

    International Nuclear Information System (INIS)

    Yui, Mikazu; Shibata, Masahiro; Rai, Dhanpat; Ochs, Michael

    2003-01-01

    In 1999 Japan Nuclear Cycle Development Institute (JNC) published a second progress report (also known as H12 report) on high-level radioactive waste (HLW) disposal in Japan (JNC 1999). This report helped to develop confidence in the selected HLW disposal system and to establish the implementation body in 2000 for the disposal of HLW. JNC developed an in-house thermodynamic database for radioactive elements for performance analysis of the engineered barrier system (EBS) and the geosphere for H12 report. This paper briefly presents the status of the JNC's thermodynamic database and its applicability to perform realistic analyses of the solubilities of radioactive elements, evolution of solubility-limiting solid phases, predictions of the redox state of Pu in the neutral pH range under reducing conditions, and to estimate solubilities of radioactive elements in cementitious conditions. (author)

  18. 77 FR 16894 - Financial Research Advisory Committee

    Science.gov (United States)

    2012-03-22

    ... reported and collected; --Performing applied research and essential long-term research; --Developing tools... economics, financial institutions and markets, statistical analysis, financial markets analysis... is essential to the effective operation of the Committee. Application for Advisory Committee...

  19. Association for Measurement and Evaluation in Counseling and Development, Committee to Screen Career Guidance Instruments Reports.

    Science.gov (United States)

    Association for Measurement and Evaluation in Counseling and Development.

    Reviews of 20 career guidance measures are reprinted from the Association for Measurement and Evaluation in Counseling and Development's "Newsnotes." Each entry includes author, title, publisher, purpose, format, scoring, norms, cost, review, concerns, and additional reviews. These tests cover the areas of occupational interests, career awareness,…

  20. Interest of a drug and therapeutics committee for the operation of a hospital in a developing country: Dapaong, Togo.

    Science.gov (United States)

    Ben Yahya, M

    2016-05-01

    The department of pharmacy of the Regional Hospital of Dapaong is responsible for delivery of health products. We sought to assess the department's avoidable costs to optimize the hospital's drug policies and thereby improve patient care. This cost-forecasting study is intended to convince the hospital staff of the utility of setting up a drug and therapeutics committee and more particularly of developing a drug handbook for use within the public health institutions of the Savanna region. This prospective study seeks to improve the efficiency, quality, and availability of medicines by listing the references currently available at the Regional Hospital to demonstrate the percentage of duplicates and to show the references currently unavailable via "lost" sales. A retrospective study then estimated the loss of income from sales due to expired drugs. Our studies indicate that optimized management of the pharmacy would result in a potential gain of 14,914,397 FCFA, that is, 22,770 €. This significant savings could be used to improve the quality of care and promote quality assurance at the CHRD. The elimination of duplicates would allow the purchase of currently unavailable pharmaceutical classes (12,369,701 FCFA, that is, 18,885 € for reinvestment), and multidisciplinary collaboration with prescribers could reduce the losses associated with expired drugs (2,544,696 FCFA, or 3,885 €). These changes would improve the matching of the drugs prescribed at the CHRD and those delivered by the pharmacy.

  1. The work of Committee 2 of ICRP in developing dose coefficients for the embryo and fetus following intakes of radionuclides by the mother

    International Nuclear Information System (INIS)

    Stather, J.W.; Phipps, A.W.

    1999-01-01

    Committee 2 of the International Commission on Radiological Protection has the responsibility for calculating radiation doses from intakes of radionuclides for all age groups in the population. This includes the development of models for calculating doses to the embryo and fetus following intakes of radionuclides by the mother. The development of both biokinetic and dosimetric models are reviewed and the results of preliminary dose calculations presented. (orig.) [de

  2. Organizing Committee Advisory Committee 187

    Indian Academy of Sciences (India)

    Organizing Committee. V M Datar (Chairman). Bhabha Atomic Research Centre, Mumbai, India. D C Biswas (Convener). Bhabha Atomic Research Centre, Mumbai, India. K Mahata (Secretary). Bhabha Atomic Research Centre, Mumbai, India. Z Ahmed. Bhabha Atomic Research Centre, Mumbai, India. P V Bhagwat.

  3. Project in fiscal 1988 for research and development of basic technologies in next generation industries. Research and development of superconducting materials and superconducting elements (Achievement report on forecast and research of superconducting element technologies); 1988 nendo chodendo soshi gijutsu yosoku kenkyu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-03-01

    With an objective to perform survey and forecast on the future of superconducting elements, collection of latest technological information and analyses of technological trends were carried out by members of the Technology Forecast and Research Committee. This paper summarizes the achievements therein. It was discovered that the Josephson element using an Al{sub 2}O{sub 3} barrier and an Nb electrode shows excellent characteristics with very good reproducibility. Trial fabrication of a four-bit micro processor was recently executed successfully by the SQUID gate using the above element. On the other hand, application of devices using high-temperature superconductors has not come out with an achievement. Although a large number of achievements have been released on mono-crystalline thin films that show good characteristics, development of substrates and barrier materials is still needed for device configuration. The method for manufacturing metal-based superconducting films has been established nearly completely as an elementary technology to develop the superconducting elements. However, making thinner the high-temperature superconducting films having been discovered recently is encountering a number of inherent problems, whereas the present stage is such that experimental discussions are being made. The process technologies, simulation, and evaluation technologies are basically the same as those for the metallic systems even for the oxide superconduction. (NEDO)

  4. Trace-element geochemistry of coal resource development related to environmental quality and health

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This report assesses for decision makers and those involved in coal resource development the environmental and health impacts of trace-element effects arising from significant increases in the use of coal, unless unusual precautions are invoked. Increasing demands for energy and the pressing need for decreased dependence of the United States on imported oil require greater use of coal to meet the nation's energy needs during the next decade. If coal production and consumption are increased at a greatly accelerated rate, concern arises over the release, mobilization, transportation, distribution, and assimilation of certain trace elements, with possible adverse effects on the environment and human health. It is, therefore, important to understand their geochemical pathways from coal and rocks via air, water, and soil to plants, animals, and ultimately humans, and their relation to health and disease. To address this problem, the Panel on Trace Element Geochemistry of Coal Resource Development Related to Health (PECH) was established. Certain assumptions were made by the Panel to highlight the central issues of trace elements and health and to avoid unwarranted duplication of other studies. Based on the charge to the Panel and these assumptions, this report describes the amounts and distribution of trace elements related to the coal source; the various methods of coal extraction, preparation, transportation, and use; and the disposal or recycling of the remaining residues or wastes. The known or projected health effects are discussed at the end of each section.

  5. The Development and Evaluation of a Computer-Simulated Science Inquiry Environment Using Gamified Elements

    Science.gov (United States)

    Tsai, Fu-Hsing

    2018-01-01

    This study developed a computer-simulated science inquiry environment, called the Science Detective Squad, to engage students in investigating an electricity problem that may happen in daily life. The environment combined the simulation of scientific instruments and a virtual environment, including gamified elements, such as points and a story for…

  6. Development of an anisotropic beam finite element for composite wind turbine blades in multibody system

    DEFF Research Database (Denmark)

    Kim, Taeseong; Hansen, Anders Melchior; Branner, Kim

    2013-01-01

    In this paper a new anisotropic beam finite element for composite wind turbine blades is developed and implemented into the aeroelastic nonlinear multibody code, HAWC2, intended to be used to investigate if use of anisotropic material layups in wind turbine blades can be tailored for improved...

  7. Developing Educational Leaders for Social Justice: Programmatic Elements that Work or Need Improvement

    Science.gov (United States)

    Guerra, Patricia L.; Nelson, Sarah W.; Jacobs, Jennifer; Yamamura, Erica

    2013-01-01

    In this qualitative study, Brown's (2004) tripartite theoretical framework on leadership preparation was used to explore the role programmatic elements played in development as social justice leaders within an educational leadership preparation program located in the United States. Findings from focus groups with twelve former graduate students…

  8. Development of Laboratory Model Ecosystems as Early Warning Elements of Environmental Pollution

    Science.gov (United States)

    1974-12-01

    AD-AOll 851 DEVELOPMENT OF LABORATORY MODEL ECOSYSTEMS AS EARLY WARNING ELEMENTS OF ENVIRONMENTAL POLLUTION Robert L. Metcalf... ENVIRONMENTAL POLLUTION Robert L. Metcalf, Ph. D. University of Illinois Urbana-Champaign, Illinois INTRODUCTION Problems of environmental pollution with...house dust is unsafe to breathe (Ewing and Pearson, 1974). Most of the source of our concern about environmental pollution by trace substances relates

  9. The Design Co-ordination Framework: key elements for effective product development

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Bowen, J.; Storm, T.

    1997-01-01

    This paper proposes a Design Co-ordination Framework (DCF) i.e. a concept for an ideal DC system with the abilities to support co-ordination of various complex aspects of product development. A set of frames, modelling key elements of co-ordination, which reflect the states of design, plans, orga...

  10. Development of an information systems to manage the fuel elements of a nuclear reactor

    International Nuclear Information System (INIS)

    Neira Orellana, Alicia Cristina

    1999-01-01

    The development of a computerized information system is presented that administers the fuel elements of a nuclear reactor. This system automates the mathematical calculations of the nuclear reactor's configuration, which have been manually controlled for many years, and it also manages the inventory of these elements for each one of the different deposits of nuclear materials. This system was designed and built based on an Object Oriented Focus (OOF), which fully meets the requirements requested and aims to facilitate the interaction between the user and the machine. The OOF methodology is based on that proposed by Peter Coad and Edward Yourdon and the development tool used is DELPHI version 3.0 (object oriented programming graphics tool that uses Pascal Object language and a Windows '98 platform). To implement the prepared tool the different stages as indicated by the authors of the above-mentioned methodology were carried out step by step, concluding with the practical benefits associated with the use of the proposed focus. A Graphic Interactive Tool is obtained that will be used in part by the people who directly operate the nuclear reactor and who do the mathematical calculations for the configuration of its nucleus. The system will allow them to considerably reduce the time needed for administering the fuel elements with the automated configuration of the operating cycle. The importance of the combination of these elements varies depending on experimental needs. All those processes linked to the configuration of the nucleus are very important, particularly the calculation of fuel element wear (burned) and the coefficient calculation that validates this configuration. These processes were used during the development of this thesis work. The system also manages an inventory of all the elements with their respective histories, facilitating follow-ups and analyses (C.W)

  11. Element repertoire: change and development with age in Whitethroat Sylvia communis song

    DEFF Research Database (Denmark)

    Balsby, T.J.S.; Hansen, P.

    2010-01-01

    Song repertoires are often important determining factors in sexual selection. In several species, older males have larger repertoires than 1-year-old males. The development of large song repertoires by an individual is, however, poorly understood. We studied song element repertoire changes in five...... based on the first-year repertoire, which may explain why large song repertoires are mainly expressed by males at least 2 years of age. It would appear, therefore, that song element repertoire size could be a reliable signal of male age....

  12. Development of a new technique for experimental evaluation of the fuel element's subchannel mixing

    International Nuclear Information System (INIS)

    Silin, Nicolas; Delmastro, Dario; Juanico, Luis

    2004-01-01

    In this work, the development of a new experimental method for the measurement of mixing between the cooling subchannels of nuclear fuel elements by using thermal traces, is presented.The method has been proved on a reduced test section with very positive results, having demonstrated its simplicity and low cost.Because it is suitable for heterogeneous and compact subchannels (asArgentinean fuels) with high water flows in simple and affordable tests at atmospheric pressure, this new method is specially well suited for the design of fuel elements, while it offers advantages over other methods of mixing measurement [es

  13. A framework for developing finite element codes for multi-disciplinary applications.

    OpenAIRE

    Dadvand, Pooyan

    2007-01-01

    The world of computing simulation has experienced great progresses in recent years and requires more exigent multidisciplinary challenges to satisfy the new upcoming demands. Increasing the importance of solving multi-disciplinary problems makes developers put more attention to these problems and deal with difficulties involved in developing software in this area. Conventional finite element codes have several difficulties in dealing with multi-disciplinary problems. Many of these codes are d...

  14. Development of three-dimensional transport code by the double finite element method

    International Nuclear Information System (INIS)

    Fujimura, Toichiro

    1985-01-01

    Development of a three-dimensional neutron transport code by the double finite element method is described. Both of the Galerkin and variational methods are adopted to solve the problem, and then the characteristics of them are compared. Computational results of the collocation method, developed as a technique for the vaviational one, are illustrated in comparison with those of an Ssub(n) code. (author)

  15. Development of 3D dynamic gap element for simulation of asymmetric fuel behavior

    International Nuclear Information System (INIS)

    Kim, Hyochan; Yang, Yongsik; Koo, Yanghyun; Kang, Changhak; Lee, Sunguk; Yang, Dongyol

    2014-01-01

    The accurate modeling of heat transfer across the gap between fuel pellets and the protective cladding is essential to understanding the fuel performance, including cladding stress and behavior under irradiated conditions. To establish a heat transfer model through a gap in the fuel performance code, the gap conductance based on the Ross and Stoute model was employed in most previous works. In this model, the gap conductance that determines the temperature gradient within the gap is a function of gap thickness, which is dependent on mechanical behavior. Recently, many researchers have been developing fuel performance codes based on the finite element method (FE) to calculate the temperature, stress, and strain in 2D or 3D. The gap conductance model for FE can be a challenging issue in terms of convergence and nonlinearity because the elements that are positioned in a gap have a different gap conductance, and the boundary conditions of the gap vary at each iteration step. In this paper, the specified 3D dynamic gap element has been proposed and implemented to simulate asymmetric thermo-mechanical fuel behavior. A thermo-mechanical 3D finite element module incorporating a gap element has been implemented using FORTRAN77. To evaluate the proposed 3D gap element, the missing pellet surface (MPS), which results in an asymmetric heat transfer in the pellet and cladding, was simulated. As a result, the maximum temperature of a pellet for the MPS problem calculated with the specified 3D gap element is much higher than the temperature calculated with a uniform gap conductance model that a multidimensional fuel performance code employs. The results demonstrate that a 3D simulation is essential to evaluate the temperature and stress of the pellet and cladding for an asymmetric geometry simulation. (author)

  16. Development of a Certified Reference Material (NMIJ CRM 7203-a) for Elemental Analysis of Tap Water.

    Science.gov (United States)

    Zhu, Yanbei; Narukawa, Tomohiro; Inagaki, Kazumi; Miyashita, Shin-Ichi; Kuroiwa, Takayoshi; Ariga, Tomoko; Kudo, Izumi; Koguchi, Masae; Heo, Sung Woo; Suh, Jung Ki; Lee, Kyoung-Seok; Yim, Yong-Hyeon; Lim, Youngran

    2017-01-01

    A certified reference material (CRM), NMIJ CRM 7203-a, was developed for the elemental analysis of tap water. At least two independent analytical methods were applied to characterize the certified value of each element. The elements certified in the present CRM were as follows: Al, As, B, Ca, Cd, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Ni, Pb, Rb, Sb, Se, Sr, and Zn. The certified value for each element was given as the (property value ± expanded uncertainty), with a coverage factor of 2 for the expanded uncertainty. The expanded uncertainties were estimated while considering the contribution of the analytical methods, the method-to-method variance, the sample homogeneity, the long-term stability, and the concentrations of the standard solutions for calibration. The concentration of Hg (0.39 μg kg -1 ) was given as the information value, since loss of Hg was observed when the sample was stored at room temperature and exposed to light. The certified values of selected elements were confirmed by a co-analysis carried out independently by the NMIJ (Japan) and the KRISS (Korea).

  17. Viewpoint: Decision-making in committees

    OpenAIRE

    Li Hao; Wing Suen

    2009-01-01

    This article reviews recent developments in the theory of committee decision-making. A committee consists of self-interested members who make a public decision by aggregating imperfect information dispersed among them according to a pre-specified decision rule. We focus on costly information acquisition, strategic information aggregation, and rules and processes that enhance the quality of the committee decision. Seeming inefficiencies of the committee decision-making process such as over-cau...

  18. Eco-organic tourism as an element of the sustainable development of territories

    Science.gov (United States)

    Ivanov, D. V.; Ziganshin, I. I.

    2018-01-01

    Organic agricultural production is an ecologically oriented alternative to traditional agriculture and is aimed at ensuring food and environmental safety of the population and territories. The development of ecological tourism on the basis of organic production farms is considered as a promising direction in the development of regional programs for the sustainable development of territories. Studies have shown that, farms engaged in the production of organic products in the Republic of Tatarstan have a significant potential for the development of eco-organic tourism using elements of the nature protection structure.

  19. The Element Analysis on The Development of Cattle Industry in Jambi

    Directory of Open Access Journals (Sweden)

    Sumarsono Sumarsono

    2016-06-01

    Full Text Available The aim of this study is to formulate the structure of the key elements and determine the development of beef cattle livestock industry system that must be done. The method used is ISM and Fuzzy ME-MCDM.. Results of the ISM data analysis can know that the key element to the needs of the program is the production technology, quality standardization Ranch Cattle, capital, and competent employees. The constraint of program : capital, facilities, infrastructure, quality, human resources, technology, and institutional. For the purpose of the program is to improve the mastery of technology, increase the added value Ranch Cattle, improving competent human resources, and economic development of Ranch Beef Cattle Industry. The results is alternative activities that must be done is the development of systems Industrial raw materials and production process.

  20. Report of the renewable energy sector Committee. National steering committee of the region and sector mobilization plan for the development of green growth professions 2009

    International Nuclear Information System (INIS)

    2009-01-01

    After a presentation of the renewable energy sector, this report identifies the development or transformation of professions within this sector, and assesses its recruitment needs. It also identifies the associated needs in terms of education and of professional course organization. It indicates the various organizations and institutions involved in matching employment offer and demand. It discusses how to valorise the main professions and education courses. Recommendations are formulated to develop knowledge, to communicate, to educate all students in building construction and architecture, to promote architecture quality in individual housing, to educate both theoretically and practically, to match offer and demand, to propose appropriate remunerations, to educate teachers, and so on

  1. Report for fiscal 1981 of committee on industrial solar system practical application technologies development; 1981 nendo sangyoyo solar system jitsuyoka gijutsu kaihatsu iinkai hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    NEDO (New Energy and Industrial Technology Development Organization) has been engaged in the development of technologies for the practical application of industrial solar systems since fiscal 1980, and has a committee established to ensure smooth progress of the endeavor. Outlined in this report are mainly the agendas of the fiscal 1981 committee and working group activities. Taken up at the 1st committee meeting convened on September 18, 1981, were the outline of the results of research conducted in fiscal 1980, plans for fiscal 1981 and their progress, plans for fiscal 1982, presentation at the International Solar Energy Society congress, and the course for system development efforts to follow. The 2nd meeting covered investigations of the actualities of dyeing plants, execution plans for fiscal 1982, and the prospects. The 3rd meeting involved a study of system flow. The cascading heat process working group at its 1st meeting discussed the achievements of fiscal 1980, plans for fiscal 1981 and their progress, plans for fiscal 1982, and presentation at the International Solar Energy Society congress. The 2nd meeting covered execution plans for fiscal 1982, the prospects, and system flow. The fixed heat process working group at its 1st meeting discussed the achievements of fiscal 1980, plans for fiscal 1981 and their progress, plans for fiscal 1982, and the International Solar Energy Society congress. The 2nd meeting took up execution plans for fiscal 1982, the prospects, and system flow. (NEDO)

  2. Development and validation of a weight-bearing finite element model for total knee replacement.

    Science.gov (United States)

    Woiczinski, M; Steinbrück, A; Weber, P; Müller, P E; Jansson, V; Schröder, Ch

    2016-01-01

    Total knee arthroplasty (TKA) is a successful procedure for osteoarthritis. However, some patients (19%) do have pain after surgery. A finite element model was developed based on boundary conditions of a knee rig. A 3D-model of an anatomical full leg was generated from magnetic resonance image data and a total knee prosthesis was implanted without patella resurfacing. In the finite element model, a restarting procedure was programmed in order to hold the ground reaction force constant with an adapted quadriceps muscle force during a squat from 20° to 105° of flexion. Knee rig experimental data were used to validate the numerical model in the patellofemoral and femorotibial joint. Furthermore, sensitivity analyses of Young's modulus of the patella cartilage, posterior cruciate ligament (PCL) stiffness, and patella tendon origin were performed. Pearson's correlations for retropatellar contact area, pressure, patella flexion, and femorotibial ap-movement were near to 1. Lowest root mean square error for retropatellar pressure, patella flexion, and femorotibial ap-movement were found for the baseline model setup with Young's modulus of 5 MPa for patella cartilage, a downscaled PCL stiffness of 25% compared to the literature given value and an anatomical origin of the patella tendon. The results of the conducted finite element model are comparable with the experimental results. Therefore, the finite element model developed in this study can be used for further clinical investigations and will help to better understand the clinical aspects after TKA with an unresurfaced patella.

  3. Sall4-Gli3 system in early limb progenitors is essential for the development of limb skeletal elements

    OpenAIRE

    Akiyama, Ryutaro; Kawakami, Hiroko; Wong, Julia; Oishi, Isao; Nishinakamura, Ryuichi; Kawakami, Yasuhiko

    2015-01-01

    The limb skeletal elements that have unique morphology and distinct locations are developed from limb progenitors, derived from the lateral plate mesoderm. These skeletal elements arise during limb development. In this study, we show genetic evidence that function of Sall4 is essential prior to limb outgrowth for development of the anterior-proximal skeletal elements. Furthermore, genetic interaction between Sall4 and Gli3 is upstream of establishing Shh (Sonic hedgehog) expression, and there...

  4. 75 FR 62534 - Request for Nominations to the National Advisory Committee for the Development of Acute Exposure...

    Science.gov (United States)

    2010-10-12

    ... of complex and technical information, and have the ability to volunteer approximately 10 to 15 hours... appearance of a lack of impartiality; e. Skills working in advisory committees and panels, and f. Diversity....gov/oppt/aeg1/pubs/ethics.htm . List of Subjects Environmental protection, Hazardous substances, NAC...

  5. The TREAT-NMD advisory committee for therapeutics (TACT): an innovative de-risking model to foster orphan drug development.

    Science.gov (United States)

    Heslop, Emma; Csimma, Cristina; Straub, Volker; McCall, John; Nagaraju, Kanneboyina; Wagner, Kathryn R; Caizergues, Didier; Korinthenberg, Rudolf; Flanigan, Kevin M; Kaufmann, Petra; McNeil, Elizabeth; Mendell, Jerry; Hesterlee, Sharon; Wells, Dominic J; Bushby, Kate

    2015-04-23

    Despite multiple publications on potential therapies for neuromuscular diseases (NMD) in cell and animal models only a handful reach clinical trials. The ability to prioritise drug development according to objective criteria is particularly critical in rare diseases with large unmet needs and a limited numbers of patients who can be enrolled into clinical trials. TREAT-NMD Advisory Committee for Therapeutics (TACT) was established to provide independent and objective guidance on the preclinical and development pathway of potential therapies (whether novel or repurposed) for NMD.We present our experience in the establishment and operation of the TACT. TACT provides a unique resource of recognized experts from multiple disciplines. The goal of each TACT review is to help the sponsor to position the candidate compound along a realistic and well-informed plan to clinical trials, and eventual registration. The reviews and subsequent recommendations are focused on generating meaningful and rigorous data that can enable clear go/no-go decisions and facilitate longer term funding or partnering opportunities. The review process thereby acts to comment on viability, de-risking the process of proceeding on a development programme.To date TACT has held 10 review meeting and reviewed 29 program applications in several rare neuromuscular diseases: Of the 29 programs reviewed, 19 were from industry and 10 were from academia; 15 were for novel compounds and 14 were for repurposed drugs; 16 were small molecules and 13 were biologics; 14 were preclinical stage applications and 15 were clinical stage applications. 3 had received Orphan drug designation from European Medicines Agency and 3 from Food and Drug Administration. A number of recurrent themes emerged over the course of the reviews and we found that applicants frequently require advice and education on issues concerned with preclinical standard operating procedures, interactions with regulatory agencies, formulation

  6. CAMAC modular instrumentation system for information processing (ESONE committee document)

    International Nuclear Information System (INIS)

    1969-03-01

    Under the auspices of the ESONE committee, European laboratories have collaborated to define the essential characteristics of a modular instrumentation system. This system will be used online with digital controllers and calculators. It comprises an interconnection system for the transfer of data and commands. The specifications given in this note refer to the standards regarding the mechanical dimensions and the characteristics of the signals necessary to ensure the compatibility between elements developed in different laboratories [fr

  7. DEVELOPMENT OF THE LOAD MEASURING DEVICES TO DETERMINE THE RESIDUAL DEFORMATION OF THE ELASTIC SENSING ELEMENT

    Directory of Open Access Journals (Sweden)

    Ivan V. Antonets

    2018-01-01

    Full Text Available The main focus in the design of weighing and batching devices is to create a gravimetric technique, capable of providing not only mass measurement – weighing with the required accuracy and speed, but also automatic control of technological processes and their control and regulation. In this case, the opportunity of two-way communication with a computer when designing the load measuring devices is realized, allowing remote monitoring and solution of logical problems associated with the management process. Modern automatic weighing and batching devices are important parts of comprehensive automation in different branches of industry. Existing developments of electrical, electronic, computing and other branches of instrument engineering techniques allow to implement transformations of the measured quantity with a very high degree of accuracy. However, if the measured quantity in the weighing process is perceived by the elastic sensing element of low quality, then no matter how high the accuracy of further changes is; the characteristics of the elastic element will limit the accuracy of the instrument as a whole. Although the elastic elements are simple mechanical parts, and many types of elastic elements are known and are widely used for many decades, their performance often does not meet the requirements, and hampers the device creation of high accuracy classes. Growing requirements for primary transformer makes actual the problem solution of improving the quality of elastic sensing elements not only in the manufacture but in the design. This led to the appearance of projects aimed at the development of computational and experimental methods that have altered the methodology for the design of force measuring devices.

  8. Development of multi-element active aerodynamics for the formula sae car

    Science.gov (United States)

    Merkel, James Patrick

    This thesis focuses on the design, development, and implementation of an active aerodynamics system on 2013 Formula SAE car. The aerodynamics package itself consists of five element front and rear wings as well as an under body diffuser. Five element wings produce significant amounts of drag which is a compromise between the cornering ability of the car and the acceleration capability on straights. The active aerodynamics system allows for the wing angle of attack to dynamically change their configuration on track based on sensory data to optimize the wings for any given scenario. The wings are studied using computational fluid dynamics both in their maximum lift configuration as well as a minimum drag configuration. A control system is then developed using an electro mechanical actuation system to articulate the wings between these two states.

  9. Development of a thermal method for the measurement of elemental carbon

    Energy Technology Data Exchange (ETDEWEB)

    Lavanchy, V.M.H. [Bern Univ. (Switzerland); Baltensperger, U.; Gaeggeler, H.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    A thermal method was developed to measure the organic carbon (OC) and elemental carbon (EC) content of atmospheric aerosols. OC is first oxidized under an O{sub 2} flow during a precombustion step and measured with an Non-Dispersive Infrared Analyzer (NDIR). The remaining carbon, defined as EC, is then oxidized at 650{sup o}C. (author) 1 fig., 1 tab., 3 refs.

  10. The Fleet-Management as an Element of the Modern Development in the Ukrainian Leasing Market

    OpenAIRE

    Garafonova Olga I.; Svynarchuk Anastasiia V.

    2017-01-01

    The article is aimed at researching practical aspects of the fleet-management development in Ukraine; relationships that arise in this process; elements that interact in the market. The preconditions of the companies’ transition to the use of this concept in the management of fleet, as well as the opportunities that arise in the enterprises using the principles of fleet-management were considered. The main advantages and disadvantages of the implementation of fleet-management in companies wit...

  11. Plasma Science Committee (PLSC)

    International Nuclear Information System (INIS)

    1990-01-01

    The Plasma Science Committee (PLSC) is a standing committee under the auspices of the Board on Physics and Astronomy, Commission on Physical Sciences, Mathematics, and Applications of the National Academy of Sciences--National Research Council. Plasma sciences represent a broad and diverse field. The PLSC has accepted the responsibility of monitoring the continuing development and assessing the general health of the field as whole. Although select advisory bodies have been created to address specific issues that affect plasma science, such as the Fusion Policy Advisory Committee (FPAC), the PLSC provides a focus for the plasma science community that is unique and essential. The membership of the PLSC is drawn from research laboratories in universities, industry, and government. Areas of expertise on the committee include accelerators and beams, space physics, astrophysics, computational physics and applied mathematics, fusion plasmas, fundamental experiments and theory, radiation sources, low temperature plasmas, and plasma-surface interactions. The PLSC is well prepared to respond to requests for studies on specific issues. This report discusses ion of the PLSC work

  12. Development of the manufacture and process for DUPIC fuel elements; development of the quality evaluation techniques for end cap welds of DUPIC fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Tae; Choi, Myong Seon; Yang, Hyun Tae; Kim, Dong Gyun; Park, Jin Seok; Kim, Jin Ho [Yeungnam University, Kyongsan (Korea)

    2002-04-01

    The objective of this research is to set up the quality evaluation techniques for end cap welds of DUPIC fuel element. High temperature corrosion test and the SCC test for Zircaloy-4 were performed, and also the possibility of the ultrasonic test technique was verified for the quality evaluation and control of the laser welds in the DUPIC fuel rod end cap. From the evaluation of corrosion properties with measuring the weight gain and observing oxide film of the specimen that had been in the circumstance of steam(400 .deg. C, 1,500 psi) by max. 70 days later, the weight gain of the welded specimens was larger than original tube and the weight increasing rate increased with the exposed days. For the Development of techniques for ultrasonic test, semi-auto ultrasonic test system has been made based on immersion pulse-echo technique using spherically concentrated ultrasonic beam. Subsequently, developed ultrasonic test technique is quite sensible to shape of welds in the inside and outside of tube as well as crack, undercut and expulsion, and also this ultrasonic test, together with metallurgical fracture test, has good reliance as enough to be used for control method of welding process. 43 refs., 47 figs., 8 tabs. (Author)

  13. Progress of the Russian RERTR program: Development of new-type fuel elements for Russian-built research reactors

    International Nuclear Information System (INIS)

    Vatulin, A. V.; Stetskiy, Y.A.; Mishunin, V.A.; Suprun, V.B.; Dobrikova, I.V.

    2002-01-01

    The new design of pin-type fuel elements and fuel assembly on their basis for Russian research reactors has been developed. The number of following activities has been performed: computational and experimental substantiation of fuel element design; development of fabrication process of fuel elements; manufacturing of experimental assembly for lifetime in-pile tests. The relevant fuel assemblies are considered to be perspective for usage as low-enriched fuel for Russian research reactors. (author)

  14. Recent developments for high-precision mass measurements of the heaviest elements at SHIPTRAP

    International Nuclear Information System (INIS)

    Minaya Ramirez, E.; Ackermann, D.; Blaum, K.; Block, M.; Droese, C.; Düllmann, Ch. E.; Eibach, M.; Eliseev, S.; Haettner, E.; Herfurth, F.; Heßberger, F.P.

    2013-01-01

    Highlights: • Direct high-precision mass measurements of No and Lr isotopes performed. • High-precision mass measurements with a count rate of 1 ion/hour demonstrated. • The results provide anchor points for a large region connected by alpha-decay chains. • The binding energies determine the strength of the deformed shell closure N = 152. • Technical developments and new techniques will pave the way towards heavier elements. -- Abstract: Atomic nuclei far from stability continue to challenge our understanding. For example, theoretical models have predicted an “island of stability” in the region of the superheavy elements due to the closure of spherical proton and neutron shells. Depending on the model, these are expected at Z = 114, 120 or even 126 and N = 172 or 184. Valuable information on the road to the island of stability is derived from high-precision mass measurements, which give direct access to binding energies of short-lived trans-uranium nuclei. Recently, direct mass measurements at SHIPTRAP have been extended to nobelium and lawrencium isotopes around the deformed shell gap N = 152. In order to further extend mass measurements to the region of superheavy elements, new technical developments are required to increase the performance of our setup. The sensitivity will increase through the implementation of a new detection method, where observation of one single ion is sufficient. Together with the use of a more efficient gas stopping cell, this will us allow to significantly enhance the overall efficiency of SHIPTRAP

  15. Boundary Element Solution of Geometrical Inverse Heat Conduction Problems for Development of IR CAT Scan

    International Nuclear Information System (INIS)

    Choi, C. Y.; Park, C. T.; Kim, T. H.; Han, K. N.; Choe, S. H.

    1995-01-01

    A geometrical inverse heat conduction problem is solved for the development of Infrared Computerized-Axial-Tomography (IR CAT) Scan by using a boundary element method in conjunction with regularization procedure. In this problem, an overspecified temperature condition by infrared scanning is provided on the surface, and is used together with other conditions to solve the position of an unknown boundary (cavity). An auxiliary problem is introduced in the solution of this problem. By defining a hypothetical inner boundary for the auxiliary problem domain, the cavity is located interior to the domain and its position is determined by solving a potential problem. Boundary element method with regularization procedure is used to solve this problem, and the effects of regularization on the inverse solution method are investigated by means of numerical analysis

  16. Sodium lauryl sulfate - a biocide for controlling acidity development in bulk commercially formed solid elemental sulfur

    Energy Technology Data Exchange (ETDEWEB)

    Hyne, J. B. [Calgary Univ., AB (Canada). Dept. of Biological Sciences

    1996-04-01

    Acidification of bulk elemental sulfur caused by Thiobacillus species which consume elemental sulfur by converting it into oxidized sulfur forms, was studied. Contributory factors, such as length of time in transit or in storage, warm temperatures, the presence of air and moisture, particle size and form of sulfur, and the presence of sources of carbon, nitrogen and phosphorus nutrients, were reviewed. Laboratory experiments with adding sodium lauryl sulfate (SLS), a known biocide, to sulfur inoculated with Thiobacillus, proved to be an efficient method for controlling acidity development. At the concentration required for effectiveness SLS did not interfere with purity specifications, had negligible effect on moisture, and appeared to be compatible with current dust suppression application practices. 2 tabs., 3 figs.

  17. Development of numerical and analytical methodology for stress analysis in guide tubes of fuel elements

    International Nuclear Information System (INIS)

    Carrilho, Leo A.; Dotto, Rosvita M.; Gouvea, Jayme P. de

    2000-01-01

    The stresses in the components of fuel elements in operation have been calculated by Industrias Nucleares do Brasil - INB, using programmes specifically developed for this are. However, worldwide useful software as Excel and ANSYS have resources that make them an alternative with advantages for those computing. In this context, the stress and displacements were calculated in the guide thimbles of a fuel element in normal operation in the reactor under static loads, through analytic and numeric models, which results are comparable to that obtained with the actual INB's methodology. The discussion of the results exposes the peculiarity of a pick of compression stress in a segment of the guide thimble which is accentuated during low power operations. Suggestions for the relief of these high stresses are proposed for future studies. (author)

  18. Development of a shielded ion microprobe analyzer (SIMA) and its application to fast reactor fuel elements

    International Nuclear Information System (INIS)

    Yuji, E.; Junji, K.; Sadamu, Y.; Toshiyuki, I.

    1983-01-01

    A shielded ion microprobe analyzer for elemental and isotopic analyses of irradiated fast reactor fuel and fuel component has been developed and installed in an alpha-gamma hot cell. Radiation shielding of the equipment ensures the radiation dose of -7 C/kg) for 5 Ci (1.85 x 10 11 Bq) of a 60 Co source. Hot samples can be automatically transferred from the cell to the sample chamber of the analyzer. Contamination inside the equipment through sputtering of the radioactive materials can be reduced with a special device. Distribution and migration of fission products, such as 137 Cs, 138 Ba, and 90 Sr, and of fissile materials, such as 235 U and 239 Pu in irradiated mixed-oxide fuel, and isotopic ratios of the elements can be obtained very precisely and quickly

  19. Development of a shielded ion microprobe analyzer (SIMA) and its application to fast reactor fuel elements

    International Nuclear Information System (INIS)

    Enokido, Y.; Itaki, T.; Komatsu, J.; Yamanouchi, S.

    1983-01-01

    A shielded ion microprobe analyzer for elemental and isotopic analyses of irradiated fast reactor fuel and fuel component has been developed and installed in an alpha-gamma hot cell. Radiation shielding of the equipment ensures the radiation dose of -7 C/kg) for 5 Ci (1.85 X 10 11 Bq) of a 60 Co source. Hot samples can be automatically transferred from the cell to the sample chamber of the analyzer. Contamination inside the equipment through sputtering of the radioactive materials can be reduced with a special device. Distribution and migration of fission products, such as 137 Cs, 138 Ba, and 90 Sr, and of fissile materials, such as 235 U and 239 Pu in irradiated mixed-oxide fuel, and isotopic ratios of the elements can be obtained very precisely and quickly

  20. Development program for fuel elements with low enriched uranium for high temperature reactors

    International Nuclear Information System (INIS)

    1987-12-01

    The results of HTR fuel development taking place at the THTR's can be summarized as follows for the main points of core manufacture coating matrix and fuel emenent manufacture: 1. The well known gel precipitation process was modified for the manufacture of UO 2 cores. 2. The TRISO coating (additional SiC layer between two very dense PyC layers) can be applied with the required quality on an economical 10 kg scale. 3. The particle fracture in the complete fuel element due to manufacture was lowered during the course of the project to below the target values of -6 U/U total. For testing fuel elements, the required irradiation samples were designed in agreement with the reactor constructors, were prepared and the first phase of the irradiation program was successfully completed in the context of the HBK project. (orig./HP) [de

  1. Report on the activities of the ASME-NQA Committee Working Group on Quality Assurance Requirements for Research and Development, April 1990 to August 1991

    Energy Technology Data Exchange (ETDEWEB)

    Dronkers, J.J.

    1991-09-01

    This report transmits to the public eye the activities of the American Society of Mechanical Engineers-Nuclear Quality Assurance (ASME-NQA) Committee Working Group on Quality Assurance Requirements for Research and Development. The appendix lists the members of this group as of August 1991. The report covers a period of 17 months. The working group met eight times in this period, and much intellectual ground was traversed. There was seldom agreement on the nature of the task, but there was no doubt as to its urgency. The task was how to adapt the nuclear quality assurance standard, the NQA-1, to research and development work. 1 fig., 7 tabs.

  2. 75 FR 57279 - Risk Communication Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-09-20

    ...] Risk Communication Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS... Communication Advisory Committee. General Function of the Committee: To provide advice and recommendations to... Committee will hear and discuss developments in FDA's ongoing communications programs, such as FDA's...

  3. 78 FR 29135 - HIT Standards Committee Advisory Meeting

    Science.gov (United States)

    2013-05-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting AGENCY: Office of...: HIT Standards Committee. General Function of the Committee: To provide recommendations to the National... Federal Health IT Strategic Plan, and in accordance with policies developed by the HIT Policy Committee...

  4. 22 CFR 214.37 - Public access to committee records.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Public access to committee records. 214.37 Section 214.37 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADVISORY COMMITTEE MANAGEMENT Operation of Advisory Committees § 214.37 Public access to committee records. Records maintained in...

  5. Transition-Focused Professional Development: An Annotated Bibliography of Essential Elements and Features of Professional Development

    Science.gov (United States)

    Holzberg, Debra G.; Clark, Kelly A.; Morningstar, Mary E.

    2018-01-01

    Transition professional development (PD) has been identified as a way to improve transition services; however, there is a dearth of literature on transition-focused PD. To learn more about the essential features of effective PD, 73 published articles were evaluated in the area of PD in both secondary transition and special education. Articles were…

  6. High-Uranium-Loaded U3O8-Al fuel element development program. Part 1

    International Nuclear Information System (INIS)

    Martin, M.M.

    1993-01-01

    The High-Uranium-Loaded U 3 O 8 -Al Fuel Element Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages. The specific objective of the program is to develop the technological and engineering data base for U 3 O 8 -Al plate-type fuel elements of maximal uranium content to the point of vendor qualification for full scale fabrication on a production basis. A program and management plan that details the organization, supporting objectives, schedule, and budget is in place and preparation for fuel and irradiation studies is under way. The current programming envisions a program of about four years duration for an estimated cost of about two million dollars. During the decades of the fifties and sixties, developments at Oak Ridge National Laboratory led to the use of U 3 O 8 -Al plate-type fuel elements in the High Flux Isotope Reactor, Oak Ridge Research Reactor, Puerto Rico Nuclear Center Reactor, and the High Flux Beam Reactor. Most of the developmental information however applies only up to a uranium concentration of about 55 wt % (about 35 vol % U 3 O 8 ). The technical issues that must be addressed to further increase the uranium loading beyond 55 wt % U involve plate fabrication phenomena of voids and dogboning, fuel behavior under long irradiation, and potential for the thermite reaction between U 3 O 8 and aluminum

  7. Policy elements for post-accident management in the event of nuclear accident. Document drawn up by the Steering Committee for the Management of the Post-Accident Phase of a Nuclear Accident (CODIRPA). Final version - 5 October 2012

    International Nuclear Information System (INIS)

    2012-01-01

    Pursuant to the Inter-ministerial Directive on the Action of the Public Authorities, dated 7 April 2005, in the face of an event triggering a radiological emergency, the National directorate on nuclear safety and radiation protection (DGSNR), which became the Nuclear safety authority (ASN) in 2006, was tasked with working the relevant Ministerial offices in order to set out the framework and outline, prepare and implement the provisions needed to address post-accident situations arising from a nuclear accident. In June 2005, the ASN set up a Steering committee for the management of the post-accident phase in the event of nuclear accident or a radiological emergency situation (CODIRPA), put in charge of drafting the related policy elements. To carry out its work, CODIRPA set up a number of thematic working groups from 2005 on, involving in total several hundred experts from different backgrounds (local information commissions, associations, elected officials, health agencies, expertise agencies, authorities, etc.). The working groups reports have been published by the ASN. Experiments on the policy elements under construction were carried out at the local level in 2010 across three nuclear sites and several of the neighbouring municipalities, as well as during national crisis drills conducted since 2008. These works gave rise to two international conferences organised by ASN in 2007 and 2011. The policy elements prepared by CODIRPA were drafted in regard to nuclear accidents of medium scale causing short-term radioactive release (less than 24 hours) that might occur at French nuclear facilities equipped with a special intervention plan (PPI). They also apply to actions to be carried out in the event of accidents during the transport of radioactive materials. Following definitions of each stage of a nuclear accident, this document lists the principles selected by CODIRPA to support management efforts subsequent to a nuclear accident. Then, it presents the main

  8. Development of soft x-ray optical elements at the advanced photon research center

    International Nuclear Information System (INIS)

    Ishino, Masahiko; Yoda, Osamu; Koike, Masato; Sano, Kazuo; Iwasaki, Hiroshi

    2003-01-01

    We have been developing soft X-ray optical elements such as diffraction gratings and multilayer mirrors to applied to X-ray plasma sources and X-ray lasers and so on. In the field of the development of diffraction gratings, the laminar-type holographic gratings for flat-field spectrographs were found to be very effective in suppressing the higher orders and stray-light level. The fabricated holographic grating has a comparable spectral resolution to the replica commercial grating. In the development of the soft X-ray multilayer mirrors, the improvement of the heat stability of the Mo/Si multilayer was carried out. We have found that the Mo/SiO 2 /Si/SiO 2 multilayer having the SiO 2 layer thicknesses of 0.5 nm at the Si-on-Mo interface and of 1.5 nm at the Mo-on-Si interface has thermally stable structure up to 500degC and maintains high soft X-ray reflectivity after annealing at 400degC. In addition, we have developed an evaluation system capable of measuring the wavelength and angular characteristics of the reflectivity and diffraction efficiency of soft X-ray optical elements. (author)

  9. For the world's best cladding tubes, ten years of progress by Zircaloy Special Committee of JAPCO

    International Nuclear Information System (INIS)

    Mishima, Yoshitsugu

    1982-01-01

    The zircaloy special committee was organized in 1971 for the purpose of planning the trial use of two nuclear fuel assemblies for which Japan-made cladding tubes were to be used, for a BWR. Now, seven years later, these two fuel assemblies have completed their service life, and have been submitted to post-irradiation examination after cooling for a year. Zircaloy tubes have been produced by Sumitomo Metal Industries, Ltd., and Kobe Steel, Ltd., and more than ten years have elapsed since wholly Japan-made zircaloy cladding tubes were used for reloading fuel elements for the Japan Power Demonstration Reactor. In this report, the history, progress and significance of the works performed by the committee are summarized. The LWR fuel elements made in Japan have attained the highest performance in the world as the leak has been scarce, and the works of the committee is one of the pioneering activities in the development of LWR fuel technology. The situation for starting the committee, the activity of the committee during ten years, the significance and outcome of the committee activity are reported. (Kako, I.)

  10. 77 FR 23250 - HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations

    Science.gov (United States)

    2012-04-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations AGENCY: Office of the National Coordinator for Health Information... 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy...

  11. 76 FR 25355 - HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations

    Science.gov (United States)

    2011-05-04

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations AGENCY: Office of the National Coordinator for Health Information... 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy...

  12. 78 FR 29134 - HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations

    Science.gov (United States)

    2013-05-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee; Schedule for the Assessment of HIT Policy Committee Recommendations AGENCY: Office of the National Coordinator for Health Information... 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy...

  13. Hospital ethics committees in Israel: structure, function and heterogeneity in the setting of statutory ethics committees

    OpenAIRE

    Wenger, N; Golan, O; Shalev, C; Glick, S

    2002-01-01

    Objectives: Hospital ethics committees increasingly affect medical care worldwide, yet there has been little evaluation of these bodies. Israel has the distinction of having ethics committees legally required by a Patients' Rights Act. We studied the development of ethics committees in this legal environment.

  14. Annex 5. Monitoring committee

    OpenAIRE

    2013-01-01

    Head of monitoring committee: the Research Commission of the govern­ment of French Polynesia. Panel members Representatives of the following organisations: IRD centre in Papeete Oceanologic Center of the Pacific/Ifremer Investment Promotion Authority Environment Division EPIC Vanille Institut Louis-Malardé Gepsun “Natural Substances process engineering” technology platform (cf. Abbreviations) Fisheries Division Economic Affairs Division External Trade Division Development of Industry and the...

  15. 78 FR 54470 - National Committee on Vital and Health Statistics: Meeting Full Committee

    Science.gov (United States)

    2013-09-04

    ... roundtable on a standards roadmap. In addition, the Committee chair will discuss elements of convergence... including an agenda will be posted when available. Should you require reasonable accommodation, please...

  16. Energy Finite Element Analysis Developments for Vibration Analysis of Composite Aircraft Structures

    Science.gov (United States)

    Vlahopoulos, Nickolas; Schiller, Noah H.

    2011-01-01

    The Energy Finite Element Analysis (EFEA) has been utilized successfully for modeling complex structural-acoustic systems with isotropic structural material properties. In this paper, a formulation for modeling structures made out of composite materials is presented. An approach based on spectral finite element analysis is utilized first for developing the equivalent material properties for the composite material. These equivalent properties are employed in the EFEA governing differential equations for representing the composite materials and deriving the element level matrices. The power transmission characteristics at connections between members made out of non-isotropic composite material are considered for deriving suitable power transmission coefficients at junctions of interconnected members. These coefficients are utilized for computing the joint matrix that is needed to assemble the global system of EFEA equations. The global system of EFEA equations is solved numerically and the vibration levels within the entire system can be computed. The new EFEA formulation for modeling composite laminate structures is validated through comparison to test data collected from a representative composite aircraft fuselage that is made out of a composite outer shell and composite frames and stiffeners. NASA Langley constructed the composite cylinder and conducted the test measurements utilized in this work.

  17. Thermal simulations and tests in the development of a helmet transport spent fuel elements Research Reactor

    International Nuclear Information System (INIS)

    Saliba, R.; Quintana, F.; Márquez Turiello, R.; Furnari, J.C.; Pimenta Mourão, R.

    2013-01-01

    A packaging for the transport of irradiated fuel from research reactors was designed by a group of researchers to improve the capability in the management of spent fuel elements from the reactors operated in the region. Two half-scale models for MTR fuel were constructed and tested so far and a third one for both MTR and TRIGA fuels will be constructed and tested next. Four test campaigns have been carried out, covering both normal and hypothetical accident conditions of transportation. The thermal test is part of the requirements for the qualification of transportation packages for nuclear reactors spent fuel elements. In this paper both the numerical modelling and experimental thermal tests performed are presented and discussed. The cask is briefly described as well as the finite element model developed and the main adopted hypotheses for the thermal phenomena. The results of both numerical runs and experimental tests are discussed as a tool to validate the thermal modelling. The impact limiters, attached to the cask for protection, were not modelled. (author) [es

  18. Design and development of a unit element microstrip antenna for aircraft collision avoidance system

    Science.gov (United States)

    De, Debajit; Sahu, Prasanna Kumar

    2017-10-01

    Aircraft/traffic alert and collision avoidance system (ACAS/TCAS) is an airborne system which is designed to provide the service as a last defense equipment for avoiding mid-air collisions between the aircraft. In the existing system, four monopole stub-elements are used as ACAS directional antenna and one blade type element is used as ACAS omnidirectional antenna. The existing ACAS antenna has some drawbacks such as low gain, large beamwidth, frequency and beam tuning/scanning issues etc. Antenna issues like unwanted signals reception may create difficulties to identify the possible threats. In this paper, the focus is on the design and development of a unit element microstrip antenna which can be used for ACAS application and to overcome the possible limitations associated with the existing techniques. Two proposed antenna models are presented here, which are single feed and dual feed microstrip dual patch slotted antenna. These are designed and simulated in CST Microwave Studio tool. The performance and other antenna characteristics have been explored from the simulation results followed by the antenna fabrication and measurement. A good reflection coefficient, Voltage Standing Wave Ratio (VSWR), narrow beamwidth, perfect directional radiation pattern, high gain and directivity make this proposed antenna a good candidate for this application.

  19. 77 FR 38630 - Open Internet Advisory Committee

    Science.gov (United States)

    2012-06-28

    ... Committee will observe market developments regarding the freedom and openness of the Internet and will focus..., Technology Policy and Internet Governance, Cisco Systems Charles Slocum, Assistant Executive Director...

  20. CARA Project: development of the advanced ULE fuel element for heavy water nuclear power plants

    International Nuclear Information System (INIS)

    Brasnarof, Daniel O.; Marino, Armando C.; Florido, Pablo C.; Munoz, C.; Bianchi, Daniel R.; Giorgis, Miguel A.

    2006-01-01

    The CARA Project (Spanish acronym of Combustible Avanzado para Reactores Argentinos) is a national fuel element technology development, compatible with our nuclear power plants (Atucha I, Embalse and Atucha II). It takes into account the experience obtained in our nuclear organisations (CNEA-CONUAR-NASA). The goal of the CARA fuel element is the performance improvement for those reactors and the enhancing of their normal operative conditions. The CARA design allows the burnup extension by using 52 rods of the same diameter. Likewise it keeps good thermo-hydraulic behaviour. The fuel bundle can be directly used in nuclear power plants with horizontal channels. By using an additional system it can be installed in the PHWR with vertical channels. The expected profits, by the use of the CARA in our reactors, broadly guaranty the recovery of the fund for its development, due to a reduction of the NPP fuels and back end cost. We estimate a reduction in the generation cost between 20 or 25 % in relation to the present one if we use 0.85 or 0.90% SEU (Slightly Enriched Uranium). The use of the CARA fuel in our reactors will also reduce the amount of spent fuel to be treated. The shortening could be between 17 to 27 % in Atucha I in relation to the present ULE (0.85%), between 38 to 46% for Embalse, and 45 to 53% for Atucha II. The mechanical behaviour and hydraulic compatibility have been verified. Several CARA prototypes were fabricated with a new design of the end plate and with new processes for the welding for the rods. We present in this paper the current status of the CARA fuel element development. (author) [es

  1. Development in fiscal 1999 of technology to put photovoltaic power generation system into practical use. Management of research and development (System development committee working group); 1999 nendo taiyoko hatsuden system jitsuyoka gijutsu kaihatsu. Kenkyu kaihatsu kanri (system kaihatsu bukai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-05-01

    This paper reports activities carried out in fiscal 1999 by the system development committee working group, a subordinate organization of the committee for development of the photovoltaic power generation technology. The items of implementation laid with emphasis in the current fiscal year included deliberations on the research achievements of the projects completed in fiscal 1999, on the research achievements of the new projects during fiscal 1999, and on pre-final evaluation of the development of a technology to put photovoltaic power generation system into practical use. The themes on the progresses in fiscal 1999 reported in March 2000 consisted of the followings: research and development of a system evaluation technology, investigation and research on supply capability evaluation on the photovoltaic power generation system, researches on peripheral devices for AC modules, investigation and research on electric safety of the photovoltaic power generation system, investigation and research on long-term reliability of inverters, investigation and research on meteorological data for optimal design, investigation and research on evaluation of the photovoltaic power generation, research on a photovoltaic power generating multi-hybrid system, research on a high-density linkage technology, and demonstrative research on a solar beam micro-hydraulic hybrid system. (NEDO)

  2. Study on Developing Degradation Model for Nuclear Power Plants With Ageing Elements Affected on Operation Parameter

    International Nuclear Information System (INIS)

    Choi, Yong Won; Lim, Sung Won; Lee, Un Chul; Kim, Man Woong; Kim, Kab; Ryu, Yong Ho

    2009-01-01

    As a part of development the evaluation system of safety margin effects for degradation of CANDU reactors, it is required that the degradation model represents the distribution of each ageing factor's value during operating year. Unfortunately, it is not easy to make an explicit relation between the RELAP-CANDU parameters and ageing mechanism because of insufficient data and lack of applicable models. So, operating parameter related with ageing is used for range determination of ageing factor. Then, relation between operating parameter and ageing elements is analyzed and ageing constant values for degradation model are determined. Also the other ageing factor is derived for more accurate ageing analysis

  3. James Webb Space Telescope Optical Telescope Element Mirror Development History and Results

    Science.gov (United States)

    Feinber, Lee D.; Clampin, Mark; Keski-Kuha, Ritva; Atkinson, Charlie; Texter, Scott; Bergeland, Mark; Gallagher, Benjamin B.

    2012-01-01

    In a little under a decade, the James Webb Space Telescope (JWST) program has designed, manufactured, assembled and tested 21 flight beryllium mirrors for the James Webb Space Telescope Optical Telescope Element. This paper will summarize the mirror development history starting with the selection of beryllium as the mirror material and ending with the final test results. It will provide an overview of the technological roadmap and schedules and the key challenges that were overcome. It will also provide a summary or the key tests that were performed and the results of these tests.

  4. Foreign tourist’s attitude to the elements of the developing of tourism in Medan, Indonesia

    Directory of Open Access Journals (Sweden)

    Dita Amanah

    2018-05-01

    Full Text Available The purpose of this study is to analyze the foreign tourist’s attitude to the elements of the tourist development in Medan. The sample size includes 80 foreign tourists who visited the tourist objects in Medan, Indonesia. A Multi-attribute Attitude Model (MAM is used to measure the consumer’s attitude. There are 10 (ten attributes that form the elements of the development of the tourism in Medan, including tourist object in Medan, the attraction of tourist object, the road conditions, the telephone network, means of transportation, the hotel service, the system of transport stripe, the se-curity system, the hospitality of the society and the cleanliness of environment. The results show that the hospitality of the society in Medan maintained the highest value (16.38 while the road rep-resented the lowest value (-0.47. The results help the government of Medan in making policy about tourism and preparing the steps of tourism development.

  5. Enhancer elements upstream of the SHOX gene are active in the developing limb.

    Science.gov (United States)

    Durand, Claudia; Bangs, Fiona; Signolet, Jason; Decker, Eva; Tickle, Cheryll; Rappold, Gudrun

    2010-05-01

    Léri-Weill Dyschondrosteosis (LWD) is a dominant skeletal disorder characterized by short stature and distinct bone anomalies. SHOX gene mutations and deletions of regulatory elements downstream of SHOX resulting in haploinsufficiency have been found in patients with LWD. SHOX encodes a homeodomain transcription factor and is known to be expressed in the developing limb. We have now analyzed the regulatory significance of the region upstream of the SHOX gene. By comparative genomic analyses, we identified several conserved non-coding elements, which subsequently were tested in an in ovo enhancer assay in both chicken limb bud and cornea, where SHOX is also expressed. In this assay, we found three enhancers to be active in the developing chicken limb, but none were functional in the developing cornea. A screening of 60 LWD patients with an intact SHOX coding and downstream region did not yield any deletion of the upstream enhancer region. Thus, we speculate that SHOX upstream deletions occur at a lower frequency because of the structural organization of this genomic region and/or that SHOX upstream deletions may cause a phenotype that differs from the one observed in LWD.

  6. Evaluation of Trace Elements and Their Relationship with Growth and Development of Young Children.

    Science.gov (United States)

    Cao, Jia; Gao, Zhenyan; Yan, Jin; Li, Minming; Su, Jia; Xu, Jian; Yan, Chong-Huai

    2016-06-01

    This study was conducted to assess the levels of trace elements and their relationship with growth and development of children in Shanghai, China, to offer scientific evidence for supplementing trace elements in children. A stratified, clustered, random sampling method was used in the study. Blood samples were taken from 2141 Shanghai children from 0 to 6.0 years old, and the concentrations of zinc (Zn), calcium (Ca), iron (Fe), copper (Cu), and magnesium (Mg) were measured using inductively coupled plasma mass spectrometry (ICP-MS). Nutritional status was determined and Z-scores of anthropometric parameters, such as height for age (HFA), weight for age (WFA), and body mass index (BMI) were calculated, indicated by HAZ, WAZ, and BMIZ, respectively. The overall median blood levels of Zn, Ca, Fe, Cu, and Mg were 8.83, 79.02, 9.49, 1.04, and 15.45 mg/L, respectively. Fe, Cu, and Mg increased with age and Zn, Fe, and Cu differed by sex. HAZ and WAZ were positively correlated with Zn (r (2) = 0.072 and 0.053, respectively; P children's growth and development. Dietary supplementation and screening of nutritional states are potential solutions to improve children's growth and development.

  7. Report of Research Cooperation Sub-Committee 46 on research and development of methods for inelastic (EPICC: Elastic-PlastIC-Creep) structural analysis

    International Nuclear Information System (INIS)

    Yamada, Yoshiaki

    1977-05-01

    This report succeeds the preceding one on ''Verification and Qualification of Nonlinear Structural Analysis Computer Program''. PNC (Power Reactor and Nuclear Fuel Development Corporation) decided to sponsor an extended research project on inelastic structural analysis for a period spanning September, 1976 to May, 1978. Responding to PNC proposal, RC Sub-Committee 46 was formed in Japan Society of Mechanical Engineers and plunged into the cooperative work from October, 1976. Besides the verification and/or qualification of available general purpose computer programs which were the major objectives of previous contract, the Committee executed the research on the topics categorized into the following three fields of interests: 1. Material data for use in elastic analysis, 2. Inelastic analysis procedure and computer program verification, 3. Design code and processing of computer solutions. This report summarizes the efforts during the first year of the Sub-Committee and consists of three parts each corresponding to the research topics stated above. Part I. Inelastic constitutive equations for materials under high temperature service conditions Part II. EPICC standard benchmark test problem and solutions Part III. Examination of postprocessors and development Although the research is still in the intermediate stage, the features of research being actively under way are 1. Evaluative review and nationwide collection of material data, recommendation of tentative constitutive equations for elastic-plastic and creep analyses of benchmark test problem, 2. Revision and augmentation of EPICC standard benchmark test problem and competitive and/or cooperative execution of solutions, 3. Review of existing prototypical post processors, and development of a processor for piping design. (author)

  8. Effect of complex acrobatic elements in the development of physical skills of preschool children

    Directory of Open Access Journals (Sweden)

    N.V. Lyulina

    2013-08-01

    Full Text Available The directions of the complex acrobatic exercises to enhance physical fitness and functional status of children. The experiment involved boys and girls aged 5 - 7 years of the preparatory group. It is noted that the use of acrobatic elements for the development of motor qualities in children brings a positive result. Found that the use of special acrobatic exercises on physical training promotes full development, allows us to develop a high level of motor skills and physical fitness. Found that the impact on athletic performance, exercise, positive motivation for physical education classes, emotional, diverse playing exercises, exercises to music. There is a significant interest and desire of children to exercise, a high performance in the classroom.

  9. Some elements for the community development starting from the establishment and use of an energetic forest

    International Nuclear Information System (INIS)

    Cantillo Higuera, Edgard Ernesto

    2000-01-01

    With this article it is looked to present several elements of community development starting from the forestry and use of energetic forests, in such a way that they guarantee a better level of the population's life, as well as the protection of the natural resources. It seeks to offer development perspectives starting from the appropriate handling of the forestall resource by means of the community participation, like productive force that should be impelled by the technical and economic contribution of the Colombian state. It is necessary to define the protagonistic paper of the municipal authorities and the community like actors in the process of sustainable development of the forestall resource as well as to identify the processes required in a system that integrates the state, the community and the natural resources for the obtaining of goods and ecological, economic and social services of the rural sector

  10. Engaging Youth in the Curriculum Development Process with Technology: The Nebraska State 4-H Youth Curriculum Committee

    Directory of Open Access Journals (Sweden)

    Michelle J. Garwood

    2010-03-01

    Full Text Available Technology is changing the way youth learn and lead. This paper illustrates a successful case study of a program that actively engaged youth in the decision-making process through the use of an online community and virtual conferencing. Synergy was generated when the youth were mentored (virtually and in-person by members of a parallel adult committee. Utilizing technology resources proved to be the key to building a vibrant, innovative and inclusive program that could overcome the barriers of time and travel constraints.

  11. Development of Multidimensional Gap Conductance model using Virtual Link Gap Element

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyo Chan; Yang, Yong Sik; Kim, Dae Ho; Bang, Je Geon; Kim, Sun Ki; Koo, Yang Hyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    The gap conductance that determines temperature gradient between pellet and cladding can be quite sensitive to gap thickness. For instance, once the gap size increases up to several micrometers in certain region, difference of pellet surface temperatures increases up to 100 Kelvin. Therefore, iterative thermo-mechanical coupled analysis is required to solve temperature distribution throughout pellet and cladding. Recently, multidimensional fuel performance codes have been being developed in the advanced countries to evaluate thermal behavior of fuel for off normal conditions and DBA(design based accident) conditions using the Finite Element Method (FEM). FRAPCON-FRAPTRAN code system, which is well known as the verified and reliable code, incorporates 1D thermal module and multidimensional mechanical module. In this code, multidimensional gap conductance model is not applied. ALCYONE developed by CEA introduces equivalent heat convection coefficient that represents multidimensional gap conductance as a function of gap thickness. BISON, which is multidimensional fuel performance code developed by INL, owns multidimensional gap conductance model using projected thermal contact. In general, thermal contact algorithm is nonlinear calculation which is expensive approach numerically. The gap conductance model for multi-dimension is difficult issue in terms of convergence and nonlinearity because gap conductance is function of gap thickness which depends on mechanical analysis at each iteration step. In this paper, virtual link gap (VLG) element has been proposed to resolve convergence issue and nonlinear characteristic of multidimensional gap conductance. In terms of calculation accuracy and convergence efficiency, the proposed VLG model was evaluated. LWR fuel performance codes should incorporate thermo-mechanical loop to solve gap conductance problem, iteratively. However, gap conductance in multidimensional model is difficult issue owing to its nonlinearity and

  12. Development of new finite element by source method. 2nd Report. Plate bending element; Source wo mochiita atarashii yugen yoso no kaihatsu. 2. Itamage yoso

    Energy Technology Data Exchange (ETDEWEB)

    Neki, I.; Tada, T. [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1996-12-31

    This paper reports a method to develop a new finite element by source (FES) for a two-dimensional plane problem and a three-dimensional solid problem as a method to analyze ship body structures. The paper describes development of a plate bending element by using a similar method, and the fundamental principle thereof. The present method can prepare a finite element of an arbitrary shape by simply providing a contact point only on a boundary. It can also derive good calculation accuracy with less number of contact points and elements. These facts are shown by examples of analyses on a square plate, a triangle plate and a semi-circular plate. Particularly, since a plate bending problem has a large order of differential calculus in a governing equation, this method being a semi-analytical method derives a result with very good accuracy even with less number of contact points. A hypothetical boundary method or a hypothetical electric charge method presents not a very high accuracy even if a large number of contact points are provided. This is because the method hypothesizes only a bending moment vertical to the boundary, but does not consider a source of the moment relative to the boundary. In contrast, the present method hypothesizes both of bending and twisting as the sources, hence its accuracy is better than with the above two methods. 5 refs., 11 figs., 7 tabs.

  13. Development of new finite element by source method. 2nd Report. Plate bending element; Source wo mochiita atarashii yugen yoso no kaihatsu. 2. Itamage yoso

    Energy Technology Data Exchange (ETDEWEB)

    Neki, I; Tada, T [Ishikawajima-Harima Heavy Industries Co. Ltd., Tokyo (Japan)

    1997-12-31

    This paper reports a method to develop a new finite element by source (FES) for a two-dimensional plane problem and a three-dimensional solid problem as a method to analyze ship body structures. The paper describes development of a plate bending element by using a similar method, and the fundamental principle thereof. The present method can prepare a finite element of an arbitrary shape by simply providing a contact point only on a boundary. It can also derive good calculation accuracy with less number of contact points and elements. These facts are shown by examples of analyses on a square plate, a triangle plate and a semi-circular plate. Particularly, since a plate bending problem has a large order of differential calculus in a governing equation, this method being a semi-analytical method derives a result with very good accuracy even with less number of contact points. A hypothetical boundary method or a hypothetical electric charge method presents not a very high accuracy even if a large number of contact points are provided. This is because the method hypothesizes only a bending moment vertical to the boundary, but does not consider a source of the moment relative to the boundary. In contrast, the present method hypothesizes both of bending and twisting as the sources, hence its accuracy is better than with the above two methods. 5 refs., 11 figs., 7 tabs.

  14. Unraveling Recrystallization Mechanisms Governing Texture Development from Rare Earth Element Additions to Magnesium

    Science.gov (United States)

    Imandoust, Aidin

    The origin of texture components associated with rare-earth (RE) element additions in wrought magnesium (Mg) alloys is a long-standing problem in magnesium technology. The objective of this research is to identify the mechanisms accountable for rare-earth texture during dynamic recrystallization (DRX). Towards this end, we designed binary Mg-Cerium and Mg-Gadolinium alloys along with complex alloy compositions containing zinc, yttrium and Mischmetal. Binary alloys along with pure Mg were designed to individually investigate their effects on texture evolutions, while complex compositions are designed to develop randomized texture, and be used in automotive and aerospace applications. We selected indirect extrusion to thermo-mechanically process our materials. Different extrusion ratios and speeds were designed to produce partially and fully recrystallized microstructures, allowing us to analyze DRX from its early stages to completion. X-ray diffraction, electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM) were used to conduct microstructure and texture analyses. Our analyses revealed that rare-earth elements in zinc-containing magnesium alloys promote discontinuous dynamic recrystallization at the grain boundaries. During nucleation, the effect of rare earth elements on orientation selection was explained by the concomitant actions of multiple Taylor axes in the same grain. Isotropic grain growth was observed due to rare earth elements segregating to grain boundaries, which lead to texture randomization. The nucleation in binary Mg-RE alloys took place by continuous formation of necklace structures. Stochastic relaxation of basal and non-basal dislocations into low-angle grain boundaries produced chains of embryos with nearly random orientations. Schmid factor analysis showed a lower net activation of dislocations in RE textured grains compared to ones on the other side of the stereographic triangle. Lower dislocation densities within

  15. Development of a participatory Management approach of the Committee for Basic Education School under the Nongbualamphu Primary Educational Service Area Office 2

    Directory of Open Access Journals (Sweden)

    Jirayu Prommajak

    2016-10-01

    Full Text Available This study aimed: 1 study the present state and adverse conditions of administration with the participation of the basic education in schools. 2 Development of a participatory Management approach of the Committee for Basic Education school under the Nongbualamphu Primary Educational Service Area Office 2. Split data into 2 phases. Phase 1: The sample used for this research consisted of 128 members of the committee on basic education in school under the Nongbualamphu Primary Educational Service Area Office 2. Selected by using stratified random sampling. Instruments used included a set of rating scale questionnaires. Phase 2: Data from the interviews using a structured questionnaire and focus group discussion. The basic statistics used for analyzing the collected data were percentage, means and standard deviation. The results of this study were as follows: 1. On the present state administration with the participation of the basic education commission in schools underunder the Nongbualamphu Primary Educational Service Area Office 2 overall participation in management is moderate. Considering the individual aspects, found that the academic administration overall participation in management and budget management were moderate. The personnel management and general and administrative overall participation in management at a high level. 2. Adverse conditions of administration with the participation of the school board for basic education in schools underunder the Nongbualamphu Primary Educational Service Area Office 2 overall in a high level. Considering the individual aspects, found that the school board in basic education is desirable to participate in the management of all aspects. 3. Development of a participatory management approach of the committee for basic education school under the Nongbualamphu Primary Educational Service Area Office 2 is a developmental process management principles PDCA, 5 steps. Step 1: Creating a common understanding Step

  16. Drug development: EU paediatric legislation, the European Medicines Agency and its Paediatric Committee--adolescents' melanoma as a paradigm.

    Science.gov (United States)

    Rose, Klaus; Senn, Stephen

    2014-01-01

    The European Medicines Agency (EMA) website lists all diseases that officially exist in adults only. The class waiver for juvenile melanoma was revoked in 2008 referring to US SEER statistics. This statistical justification is misleading. Melanoma in adolescents is much rarer than claimed by EMA/Paediatric Committee; < 1 ∕ 4 of adolescents with melanoma need systemic treatment; separate efficacy studies are neither medically justified nor feasible. The scarce adolescent patients should be allowed to participate in adult trials. To force companies to investigate them separately turns them into paediatric hostages, to adapt the term therapeutic orphans coined in 1968 by Shirkey. There are now five melanoma Paediatric Investigation Plans (PIPs). Probably none of the PIP-triggered clinical studies will ever be completed; we propose to call them ghost studies. An oncology research network considering a reasonable trial in melanoma, including adolescents, will compete for recruitment with the PIP-triggered trials designed by regulatory tunnel vision and sponsored by companies under EMA-imposed pressure. EMA/Paediatric Committee's territorial enthusiasm ("our patients") damages oncology research. Copyright © 2014 John Wiley & Sons, Ltd.

  17. Technologies for improving current and future light water reactor operation and maintenance: Development on the basis of experience. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-09-01

    Application of efficient technologies for improving operation and maintenance of nuclear power plants is an important element for assuring their economic competitiveness with other means of generating electricity. The competitive environment, which nuclear power plant operators face in many countries as a result of de-regulation of the electricity market, imposes cost pressures that must be met while at the same time satisfying stringent safety requirements. Further, as currently operating plants age, proper management includes development and application of better technologies for inspection, maintenance and repair. For future plants, the opportunity exists during the design phase to incorporate design features for performing efficient inspection, maintenance and repairs. Despite the prevailing low prices of fossil fuels, the generation costs of nuclear electricity continue to be competitive with electricity generation costs from fossil-fuelled plants for base load generation in several countries. For nuclear power, the capital investment component of electricity generation cost is relatively high, while the nuclear fuel cycle cost is - and is expected to remain - relatively low. The prices of fossil fuels are fairly low today but are likely to increase over the long term because the resource is limited. Moreover, governments may introduce incentives to reduce the use of fossil fuels in order to protect the environment. In many countries, nuclear utilities are experiencing increased competition with other sources of electricity production due to deregulation of the electricity market, and nuclear plant operators can no longer pass along the generation costs to consumers through regulated electricity rates. This competitive environment has significant implications for plant operations to achieve efficient use of all resources, and to effectively manage plant activities including outages and maintenance. Over the past several years, steady improvements have been

  18. Technologies for improving current and future light water reactor operation and maintenance: Development on the basis of experience. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    Application of efficient technologies for improving operation and maintenance of nuclear power plants is an important element for assuring their economic competitiveness with other means of generating electricity. The competitive environment, which nuclear power plant operators face in many countries as a result of de-regulation of the electricity market, imposes cost pressures that must be met while at the same time satisfying stringent safety requirements. Further, as currently operating plants age, proper management includes development and application of better technologies for inspection, maintenance and repair. For future plants, the opportunity exists during the design phase to incorporate design features for performing efficient inspection, maintenance and repairs. Despite the prevailing low prices of fossil fuels, the generation costs of nuclear electricity continue to be competitive with electricity generation costs from fossil-fuelled plants for base load generation in several countries. For nuclear power, the capital investment component of electricity generation cost is relatively high, while the nuclear fuel cycle cost is - and is expected to remain - relatively low. The prices of fossil fuels are fairly low today but are likely to increase over the long term because the resource is limited. Moreover, governments may introduce incentives to reduce the use of fossil fuels in order to protect the environment. In many countries, nuclear utilities are experiencing increased competition with other sources of electricity production due to deregulation of the electricity market, and nuclear plant operators can no longer pass along the generation costs to consumers through regulated electricity rates. This competitive environment has significant implications for plant operations to achieve efficient use of all resources, and to effectively manage plant activities including outages and maintenance. Over the past several years, steady improvements have been

  19. Development of a transport cask for spent fuel elements of research reactors

    International Nuclear Information System (INIS)

    Quintana, F.; Saliba, R.O.; Furnari, J.C.; Mourao, R.P; Leite da Silva, L.; Novara, O.; Alexandre Miranda, C.; Mattar Neto, M.

    2012-01-01

    This article presents an overview of the development of a research reactor spent fuel transport cask. Through a project funded by the IAEA, Argentina, Brazil and Chile have collaborated to enhance regional capacity in the management of spent fuel elements from research reactors operated in the region. A packaging for the transport of research reactors spent fuel was developed. It was designed by a team of researchers from the countries mentioned and a 1:2 scale model for MTR type fuel was constructed in Argentina and subsequently tested in CDTN facilities in Belo Horizonte, Brazil. There were three test sequences to test the cask for normal transport and hypothetical accident conditions. It has successfully passed the tests and the overall performance was considered satisfactory. As part of the licensing process, a test sequence with the presence of regulatory authorities is scheduled for December, 2012 (author)

  20. ELEMENTS FOR A SOCIOLOGICAL ANALYSIS OF HERITAGE POLICIES IN SOUTH BRAZIL: CULTURE, TOURISM AND DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Rodrigo Manoel Dias da Silva

    2016-05-01

    Full Text Available This article analyzes the contemporary condition of heritage policies in cities tumbled by official organ tipping considering in sociological perspective, the multiple mediations that affect the social goals deposited in them. The theoretical and empirical analysis presented, culture, tourism and development in shape important for the design of a theoretical approach to the phenomenon interpretative elements. The author concludes that, ambivalently, such policies intersect with social processes of identity affirmation of individuals and groups in the heritage landscape of cultural productions and at the same time, with narratives that allow the heritage of the place "resource" to programs of social development and revitalization of tourism and economic circuits in the region.

  1. Development, Validation and Parametric study of a 3-Year-Old Child Head Finite Element Model

    Science.gov (United States)

    Cui, Shihai; Chen, Yue; Li, Haiyan; Ruan, ShiJie

    2015-12-01

    Traumatic brain injury caused by drop and traffic accidents is an important reason for children's death and disability. Recently, the computer finite element (FE) head model has been developed to investigate brain injury mechanism and biomechanical responses. Based on CT data of a healthy 3-year-old child head, the FE head model with detailed anatomical structure was developed. The deep brain structures such as white matter, gray matter, cerebral ventricle, hippocampus, were firstly created in this FE model. The FE model was validated by comparing the simulation results with that of cadaver experiments based on reconstructing the child and adult cadaver experiments. In addition, the effects of skull stiffness on the child head dynamic responses were further investigated. All the simulation results confirmed the good biofidelity of the FE model.

  2. Development of SEM/STEM-WDX for highly sensitive detection of light elements

    Science.gov (United States)

    Anan, Y.; Koguchi, M.; Kimura, T.; Sekiguchi, T.

    2018-02-01

    In this study, to detect the light element lithium (Li) and to detect low dosed Boron (B) in the local area at nm order, we developed an analytical electron microscope equipped with an improved serial (S)-type WDX (wavelength dispersive X-ray spectroscopy) system. In detail, to detect Li, we developed a high-conductivity multi-capillary X-ray (MCX) lens, and a diffractor with a lattice spacing (d) of 15 nm, and with a spacing variation (δ d) of 0.8 nm. Moreover, to detect low dosed light element B, we designed a high-conductivity MCX lens based on the soft X-ray reflectivity in the capillary and calculation. We developed a large-solid-angle MCX lens whose conductivity of the characteristic X-rays of B became 20 times higher than that of an MCX lens with a 30-mm focal length. Our developed analytical electron microscope was applied to a LiAl specimen and a low B-doped Si substrate specimen, and the performance of this analytical electron microscope was evaluated. As a results, this analytical electron microscope could detect the characteristic X-rays of Li with a minimum mass fraction (MMF) of 8.4 atomic % (at. %). The energy resolution was 1 eV at 55 eV. From the results of measuring the line profile of B for the unpatterned B-implantation area on a B-doped Si substrate specimen, the measured line profile data were in good agreement with secondary ion mass spectrometry data up to a depth of 100 nm with a B concentration of 0.05 at. %.

  3. The longitudinal distribution of elements in developing and aging scots pine needles

    International Nuclear Information System (INIS)

    Viksna, A.; Helmisaari, H.S.; Standzenieks, P.; Lindgren, E.S.

    2001-01-01

    Needle or leaf nutrient concentrations are commonly used for analysing tree nutritional status for e.g. estimating possible nutrient deficiencies or unbalances. The practise used e.g. in northern Europe is to sample needles during the dormant period from either the current or in some cases several needle age classes from a fixed position of a number of trees in a stand. The sampled needles are then dried and ground for nutrient analysis. The sampling aims to minimise the spatial and temporal variation in needle nutrient concentrations for estimating the availability of nutrients in soil through needle analysis. It is well known that the concentrations of different nutrients vary in needles with the phase of the annual physiological cycle (Fife and Nambiar 1982, 1984), needle age (Florence and Chuoung 1974, Madgwick et al. 1983) and sampling position (Helmisaari 1992). The samples analysed are usually bulk samples of a large number of needles, and the results are mean concentrations representing an age class in a stand. There is little information on how different needles vary in nutrient concentrations, and even less on how nutrient concentrations vary within individual needles. The import and export of elements to and from needles varies according to the developmental phase of needles, and is likely to affect the element concentrations in different parts of the needles. Accordingly, the elemental concentrations measured in different parts of the needles may give an insight into the transport pattern of an element and its potential mobility. Up to now, very few studies report needle element concentrations in different parts of the needles, e.g. tip, base and middle (Giertych et al. 1997), or in different parts of the leaf phloem (Eschrich et al. 1988). The aim of this study was to determine the distribution of different elements along the length of single Scots pine needles of different age and during different stages of needle physiological cycle. The scanning

  4. Process development for elemental recovery from PGM tailings by thermochemical treatment: Preliminary major element extraction studies using ammonium sulphate as extracting agent.

    Science.gov (United States)

    Mohamed, Sameera; van der Merwe, Elizabet M; Altermann, Wladyslaw; Doucet, Frédéric J

    2016-04-01

    Mine tailings can represent untapped secondary resources of non-ferrous, ferrous, precious, rare and trace metals. Continuous research is conducted to identify opportunities for the utilisation of these materials. This preliminary study investigated the possibility of extracting major elements from South African tailings associated with the mining of Platinum Group Metals (PGM) at the Two Rivers mine operations. These PGM tailings typically contain four major elements (11% Al2O3; 12% MgO; 22% Fe2O3; 34% Cr2O3), with lesser amounts of SiO2 (18%) and CaO (2%). Extraction was achieved via thermochemical treatment followed by aqueous dissolution, as an alternative to conventional hydrometallurgical processes. The thermochemical treatment step used ammonium sulphate, a widely available, low-cost, recyclable chemical agent. Quantification of the efficiency of the thermochemical process required the development and optimisation of the dissolution technique. Dissolution in water promoted the formation of secondary iron precipitates, which could be prevented by leaching thermochemically-treated tailings in 0.6M HNO3 solution. The best extraction efficiencies were achieved for aluminium (ca. 60%) and calcium (ca. 80%). 35% iron and 32% silicon were also extracted, alongside chromium (27%) and magnesium (25%). Thermochemical treatment using ammonium sulphate may therefore represent a promising technology for extracting valuable elements from PGM tailings, which could be subsequently converted to value-added products. However, it is not element-selective, and major elements were found to compete with the reagent to form water-soluble sulphate-metal species. Further development of this integrated process, which aims at achieving the full potential of utilisation of PGM tailings, is currently underway. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Development of a SISAK extraction system for chemical studies of element 108, hassium

    Energy Technology Data Exchange (ETDEWEB)

    Samadani, F.; Alstad, J.; Bjoernstad, T.; Stavsetra, L.; Omtvedt, J.P. [Oslo Univ. (Germany). Dept. of Chemistry

    2010-07-01

    A liquid-liquid extraction system suitable for studies of chemical properties of Hs (element 108), in the form of HsO{sub 4}, was developed using {gamma}-emitting isotopes of its homologue Os. The system is targeted for the fast on-line extraction system SISAK, which operates in a continuous manner and is suitable for liquid-phase studies of transactinide elements. The distribution of OsO{sub 4} between various dilute NaOH solutions and toluene was studied. Both batch and SISAK on-line experiments were performed to develop an appropriate system. From analysis of the extraction curves equilibrium constants for the formation of the presumed complexes, Na[OsO{sub 4}(OH)] and Na{sub 2}[OsO{sub 4}(OH){sub 2}], were obtained: K{sub 1} = (1 {+-} 0.5) x 10{sup 4} and K{sub 2} = 12 {+-} 8, respectively. The SISAK system includes a liquid-scintillation detection system for {alpha} measurements. Due to quenching effects it is not possible to perform direct measurement of the aqueous phase {alpha}'s. Therefore, a two-stage extraction method that provides an indirect measurement of the activity in the aqueous phase was developed as part of the proposed system for Hs: Acidification of the raffinate from the first stage result in recovery of OsO{sub 4}, which is highly extractable into toluene. The yield of extraction in the second step, from 0.01 M NaOH solution after acidification with H{sub 2}SO{sub 4} solution, was (90 {+-} 3)%. (orig.)

  6. Development of a SISAK extraction system for chemical studies of element 108, hassium

    International Nuclear Information System (INIS)

    Samadani, F.; Alstad, J.; Bjoernstad, T.; Stavsetra, L.; Omtvedt, J.P.

    2010-01-01

    A liquid-liquid extraction system suitable for studies of chemical properties of Hs (element 108), in the form of HsO 4 , was developed using γ-emitting isotopes of its homologue Os. The system is targeted for the fast on-line extraction system SISAK, which operates in a continuous manner and is suitable for liquid-phase studies of transactinide elements. The distribution of OsO 4 between various dilute NaOH solutions and toluene was studied. Both batch and SISAK on-line experiments were performed to develop an appropriate system. From analysis of the extraction curves equilibrium constants for the formation of the presumed complexes, Na[OsO 4 (OH)] and Na 2 [OsO 4 (OH) 2 ], were obtained: K 1 = (1 ± 0.5) x 10 4 and K 2 = 12 ± 8, respectively. The SISAK system includes a liquid-scintillation detection system for α measurements. Due to quenching effects it is not possible to perform direct measurement of the aqueous phase α's. Therefore, a two-stage extraction method that provides an indirect measurement of the activity in the aqueous phase was developed as part of the proposed system for Hs: Acidification of the raffinate from the first stage result in recovery of OsO 4 , which is highly extractable into toluene. The yield of extraction in the second step, from 0.01 M NaOH solution after acidification with H 2 SO 4 solution, was (90 ± 3)%. (orig.)

  7. Sall4-Gli3 system in early limb progenitors is essential for the development of limb skeletal elements.

    Science.gov (United States)

    Akiyama, Ryutaro; Kawakami, Hiroko; Wong, Julia; Oishi, Isao; Nishinakamura, Ryuichi; Kawakami, Yasuhiko

    2015-04-21

    Limb skeletal elements originate from the limb progenitor cells, which undergo expansion and patterning to develop each skeletal element. Posterior-distal skeletal elements, such as the ulna/fibula and posterior digits develop in a Sonic hedgehog (Shh)-dependent manner. However, it is poorly understood how anterior-proximal elements, such as the humerus/femur, the radius/tibia and the anterior digits, are developed. Here we show that the zinc finger factors Sall4 and Gli3 cooperate for proper development of the anterior-proximal skeletal elements and also function upstream of Shh-dependent posterior skeletal element development. Conditional inactivation of Sall4 in the mesoderm before limb outgrowth caused severe defects in the anterior-proximal skeletal elements in the hindlimb. We found that Gli3 expression is reduced in Sall4 mutant hindlimbs, but not in forelimbs. This reduction caused posteriorization of nascent hindlimb buds, which is correlated with a loss of anterior digits. In proximal development, Sall4 integrates Gli3 and the Plzf-Hox system, in addition to proliferative expansion of cells in the mesenchymal core of nascent hindlimb buds. Whereas forelimbs developed normally in Sall4 mutants, further genetic analysis identified that the Sall4-Gli3 system is a common regulator of the early limb progenitor cells in both forelimbs and hindlimbs. The Sall4-Gli3 system also functions upstream of the Shh-expressing ZPA and the Fgf8-expressing AER in fore- and hindlimbs. Therefore, our study identified a critical role of the Sall4-Gli3 system at the early steps of limb development for proper development of the appendicular skeletal elements.

  8. Development of a high frequency single-element ultrasound needle transducer for anesthesia delivery

    Science.gov (United States)

    Ameri, Golafsoun; Son, Jungik; Liang, Jingwei; Foster, F. Stuart; Ganapathy, Sugantha; Peters, Terry M.

    2017-03-01

    Epidural anesthesia is one of the most commonly used and yet challenging techniques employed for pain management and anesthesia delivery. The major complications of this procedure are due to accidental dural puncture, with an incidence of 1-3%, which could lead to both temporary and irreversible permanent neurological complications. Needle placement under ultrasound (US) guidance has received increasing interest for improving needle placement accuracy. However, poor needle visibility in US, difficulties in displaying relevant anatomical structure such as dura mater due to attenuation and bone shadowing, and image interpretation variability among users pose significant hurdles for any US guidance system. As a result, US guidance for epidural injections has not been widely adopted for everyday use for the performance of neuraxial blocks. The difficulties in localizing the ligamentum flavum and dura with respect to the needle tip can be addressed by integrating A-mode US, provided by a single-element transducer at the needle tip, into the B-mode US guidance system. We have taken the first steps towards providing such a guidance system. Our goal is to improve the safety of this procedure with minimal changes to the clinical workflow. This work presents the design and development of a 20 MHz single-element US transducer housed at the tip of a 19 G needle hypodermic tube, which can fit inside an epidural introducer needle. In addition, the results from initial transducer characterization tests and performance evaluation of the transducer in a euthanized porcine model are provided.

  9. 32-element beta detector developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecki, Maciej; Yakushev, Alexander; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kłos, Helena; Panas, Andrzej; Słysz, Wojciech; Stolarski, Maciej; Szmigiel, Dariusz; Wegrzecka, Iwona; Zaborowski, Michał

    2014-08-01

    The paper presents the design, technology and parameters of a new .silicon detector for detection of electrons (below named as beta detector) developed at the Institute of Electron Technology (ITE). The detector will be used for research on transactinide elements at the GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (GSI). The detector consists of a monolithic 32-element array with an active area diameter of 90 mm and a thickness of 0.9 mm. The starting material is a high-resistivity ν silicon wafer (5 kΩcm resistivity). 32 planar p+-ν junctions are formed by boron diffusion on the top side of the wafer. On the bottom side, an n+ region, which forms a common cathode, is formed on the entire surface by phosphorus diffusion. The array is mounted on a special epoxy-glass laminate substrate, copper-clad on both sides. Two model detectors have been fabricated and studied. Very good electrical parameters have been achieved. For the first array, with supply voltage VR = 20 V, the minimum dark current was 8 nA, the maximum dark current 97.1 nA, and the average dark current 25.1 nA. For the second array, it was 11.5 nA, 378.8 nA and 40.0 nA respectively.

  10. Rayleigh-based, multi-element coral thermometry: A biomineralization approach to developing climate proxies

    Science.gov (United States)

    Gaetani, G.A.; Cohen, A.L.; Wang, Z.; Crusius, John

    2011-01-01

    This study presents a new approach to coral thermometry that deconvolves the influence of water temperature on skeleton composition from that of “vital effects”, and has the potential to provide estimates of growth temperatures that are accurate to within a few tenths of a degree Celsius from both tropical and cold-water corals. Our results provide support for a physico-chemical model of coral biomineralization, and imply that Mg2+ substitutes directly for Ca2+ in biogenic aragonite. Recent studies have identified Rayleigh fractionation as an important influence on the elemental composition of coral skeletons. Daily, seasonal and interannual variations in the amount of aragonite precipitated by corals from each “batch” of calcifying fluid can explain why the temperature dependencies of elemental ratios in coral skeleton differ from those of abiogenic aragonites, and are highly variable among individual corals. On the basis of this new insight into the origin of “vital effects” in coral skeleton, we developed a Rayleigh-based, multi-element approach to coral thermometry. Temperature is resolved from the Rayleigh fractionation signal by combining information from multiple element ratios (e.g., Mg/Ca, Sr/Ca, Ba/Ca) to produce a mathematically over-constrained system of Rayleigh equations. Unlike conventional coral thermometers, this approach does not rely on an initial calibration of coral skeletal composition to an instrumental temperature record. Rather, considering coral skeletogenesis as a biologically mediated, physico-chemical process provides a means to extract temperature information from the skeleton composition using the Rayleigh equation and a set of experimentally determined partition coefficients. Because this approach is based on a quantitative understanding of the mechanism that produces the “vital effect” it should be possible to apply it both across scleractinian species and to corals growing in vastly different environments. Where

  11. Water channel reactor fuels and fuel channels: Design, performance, research and development. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) recommended holding a Technical Committee Meeting on Water Channel Reactor Fuel including into this category fuels and pressure tubes/fuel channels for Atucha-I and II, BWR, CANDU, FUGEN and RBMK reactors. The IWGFPT considered that even if the characteristics of Atucha, CANDUs, BWRs, FUGEN and RBMKs differ considerably, there are also common features. These features include materials aspects, as well as core, fuel assembly and fuel rod design, and some safety issues. There is also some similarity in fuel power history and operating conditions (Atucha-I and II, FUGEN and RBMK). Experts from 11 countries participated at the meeting and presented papers on technology, performance, safety and design, and materials aspects of fuels and pressure tubes/fuel channels for the above types of water channel reactors. Refs, figs, tabs.

  12. Water channel reactor fuels and fuel channels: Design, performance, research and development. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1998-01-01

    The International Working Group on Water Reactor Fuel Performance and Technology (IWGFPT) recommended holding a Technical Committee Meeting on Water Channel Reactor Fuel including into this category fuels and pressure tubes/fuel channels for Atucha-I and II, BWR, CANDU, FUGEN and RBMK reactors. The IWGFPT considered that even if the characteristics of Atucha, CANDUs, BWRs, FUGEN and RBMKs differ considerably, there are also common features. These features include materials aspects, as well as core, fuel assembly and fuel rod design, and some safety issues. There is also some similarity in fuel power history and operating conditions (Atucha-I and II, FUGEN and RBMK). Experts from 11 countries participated at the meeting and presented papers on technology, performance, safety and design, and materials aspects of fuels and pressure tubes/fuel channels for the above types of water channel reactors

  13. Activities of the research committee

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, A.; Shirai, T.; Nakagawa, M.; Osugi, T.; Ikeda, Y.; Ishida, T.; Shimazaki, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-01-01

    The department of Nuclear Energy System serves as a secretarial of the following four research committees organized by JAERI; Japanese Nuclear Data Committee, Atomic and Molecular Data Research Committee, Research Committee on Reactor Physics and Research Committee on Marine Reactors. The purpose and the expected task of each committee are summarized here. The detailed activities of each committee are presented in this paper. (author)

  14. Development of Multiple-Element Flame Emission Spectrometer Using CCD Detection

    Science.gov (United States)

    Seney, Caryn S.; Sinclair, Karen V.; Bright, Robin M.; Momoh, Paul O.; Bozeman, Amelia D.

    2005-01-01

    The full wavelength coverage of charge coupled device (CCD) detector when coupled with an echelle spectrography, the system allows for simultaneously multiple element spectroscopy to be performed. The multiple-element flame spectrometer was built and characterized through the analysis of environmentally significant elements such as Ca, K, Na, Cu,…

  15. Research and development of optic fiber sensitive elements for fatigue gauges

    International Nuclear Information System (INIS)

    Rakhimov, N.R.; Shamirzaev, S.Kh.

    2004-01-01

    In the work a possibility for using the optic fibers as the sensitive element for the fatigue gauge of mechanical construction elements is investigated. The experimental results are presented on investigation of polymer optic fibers subjected to the fatigue loads using the special tools. It was shown that they have a high sensitivity to fatigue damage of construction elements. (author)

  16. Development of the testing procedure for units and elements of mining equipment

    Directory of Open Access Journals (Sweden)

    P. B. Gerike

    2017-09-01

    Full Text Available The author considers in detail the stages of creating a testing procedure for mining equipment based on the complex implementation of principles of nondestructive testing and technical diagnostics. The author substantiates effectiveness of application of a complex diagnostic approach for assessing the state of metal structures and energy-mechanical equipment of mining machines. The opportunity for timely detection of defects, regardless of their type and degree of danger, presents itself only with a wide application of the modern methods of vibration diagnostics and nondestructive testing. The author substantiates the effectiveness of specific combination of methods of nondestructive testing, most optimally suited for solving given tasks. The article contains the developed complex of more than 120 diagnostic rules, suitable for performing automated analysis of vibroacoustic signal and revealing the main damages of energy-mechanical equipment based on selective groups of informative frequencies. The author formulates the main criteria that one can use as a basic platform for improving the methodology for normalizing the parameters of mechanical oscillations. The developed diagnostic criteria became a basis for the development of individual spectral masks suitable for performing the analysis of parameters of vibroacoustic waves generated during operation of mining equipment. The author proves necessity of transition of repair and maintenance divisions of industrial enterprises to the system of maintenance of machinery according to its actual technical state, and the developed complex of diagnostic rules for detecting defects can serve as a platform for the implementation of basic elements of this system. The author substantiates the principal validity of the developed methodology for testing mining machines equipment and its individual elements, such as the predictive modeling of degradation of technical state of mining equipment and the

  17. Development of mechanical analysis module for simulation of SFR fuel rod behavior using finite element method

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Andong; Jeong, Hyedong; Suh, Namduk [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Kim, Hyochan; Yang, Yongsik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2014-10-15

    Korean SFR developer decided to adapt metal fuel, current study focused on the metal fuel instead of oxide fuel. The SFR metal fuel has been developed by Korea Atomic Energy Research Institute (KAERI) and many efforts focused on designing and manufacturing the metal fuel. Since a nuclear fuel is the first barrier to protect radioactive isotope release, the fuel's integrity must be secured during steady-state operation and accident condition within an acceptable range. Whereas the design and evaluation methodologies, code systems and test procedures of a light water reactor fuel are sufficiently established, those of the SFR fuel needs more technical advances. In the view of regulatory point, there are still many challenging issues which are required to secure the safety of fuel and reactors. For this reason, the Korea Institute of Nuclear Safety (KINS) has launched the new project to develop the regulatory technology for SFR system including a fuel area. The ALFUS code was developed by CRIEPI and employs mechanistic model for fission gas release and swelling of fuel slug. In the code system, a finite element method was introduced to analyze the fuel and cladding's mechanical behaviors. The FEAST code is more advanced code system for SFR which adopted mechanistic FGR and swelling model but still use analytical model to simulate fuel and cladding mechanical behavior. Based on the survey of the previous studies, fuel and cladding mechanical model should be improved. Analysis of mechanical behavior for fuel rod is crucial to evaluate overall rod's integrity. In addition, it is because contact between fuel slug and cladding or an over-pressure of rod internal pressure can cause rod failure during steady-state and other operation condition. The most of reference codes have simplified mechanical analysis model, so called 'analytical mode', because the detailed mechanical analysis requires large amount of calculation time and computing power. Even

  18. Development of mechanical analysis module for simulation of SFR fuel rod behavior using finite element method

    International Nuclear Information System (INIS)

    Shin, Andong; Jeong, Hyedong; Suh, Namduk; Kim, Hyochan; Yang, Yongsik

    2014-01-01

    Korean SFR developer decided to adapt metal fuel, current study focused on the metal fuel instead of oxide fuel. The SFR metal fuel has been developed by Korea Atomic Energy Research Institute (KAERI) and many efforts focused on designing and manufacturing the metal fuel. Since a nuclear fuel is the first barrier to protect radioactive isotope release, the fuel's integrity must be secured during steady-state operation and accident condition within an acceptable range. Whereas the design and evaluation methodologies, code systems and test procedures of a light water reactor fuel are sufficiently established, those of the SFR fuel needs more technical advances. In the view of regulatory point, there are still many challenging issues which are required to secure the safety of fuel and reactors. For this reason, the Korea Institute of Nuclear Safety (KINS) has launched the new project to develop the regulatory technology for SFR system including a fuel area. The ALFUS code was developed by CRIEPI and employs mechanistic model for fission gas release and swelling of fuel slug. In the code system, a finite element method was introduced to analyze the fuel and cladding's mechanical behaviors. The FEAST code is more advanced code system for SFR which adopted mechanistic FGR and swelling model but still use analytical model to simulate fuel and cladding mechanical behavior. Based on the survey of the previous studies, fuel and cladding mechanical model should be improved. Analysis of mechanical behavior for fuel rod is crucial to evaluate overall rod's integrity. In addition, it is because contact between fuel slug and cladding or an over-pressure of rod internal pressure can cause rod failure during steady-state and other operation condition. The most of reference codes have simplified mechanical analysis model, so called 'analytical mode', because the detailed mechanical analysis requires large amount of calculation time and computing power. Even

  19. The Fleet-Management as an Element of the Modern Development in the Ukrainian Leasing Market

    Directory of Open Access Journals (Sweden)

    Garafonova Olga I.

    2017-11-01

    Full Text Available The article is aimed at researching practical aspects of the fleet-management development in Ukraine; relationships that arise in this process; elements that interact in the market. The preconditions of the companies’ transition to the use of this concept in the management of fleet, as well as the opportunities that arise in the enterprises using the principles of fleet-management were considered. The main advantages and disadvantages of the implementation of fleet-management in companies with the available fleet of various sizes were researched. The main features, current tendencies of the fleet-management development have been indicated, ways of attraction of automobile enterprises to the use of leasing have been suggested. Prospects for further researches in this direction will be consideration of possibility of attraction of more enterprises to the use of principles of fleet-management in their management routine. Further development of fleet management will provide enterprises with significant opportunities and the reserve funds that can be used for development.

  20. Image Processing of Welding Procedure Specification and Pre-process program development for Finite Element Modelling

    International Nuclear Information System (INIS)

    Kim, K. S.; Lee, H. J.

    2009-11-01

    PRE-WELD program, which generates automatically the input file for the finite element analysis on the 2D butt welding at the dissimilar metal weld part, was developed. This program is pre-process program of the FEM code for analyzing the residual stress at the welding parts. Even if the users have not the detail knowledge for the FEM modelling, the users can make the ABAQUS INPUT easily by inputting the shape data of welding part, the weld current and voltage of welding parameters. By using PRE-WELD program, we can save the time and the effort greatly for preparing the ABAQUS INPUT for the residual stress analysis at the welding parts, and make the exact input without the human error

  1. Development of radiochemical separation method for determination of toxic elements in biological samples

    International Nuclear Information System (INIS)

    Maihara, V.A.; Vasconcellos, M.B.A.; Favaro, D.I.T.; Armelin, M.J.A.

    1990-01-01

    In order to determine Hg, Sb, As and Se in biological materials by neutron activation analysis, a radiochemical separation was developed. The chemical separation procedure used was based on the digestion of the irradiated sample in a mixture of H NO 3 and H 2 SO 4 in a teflon bomb, at 130 0 C for 1 to 4 hours. After the dissolution of organic matter, Hg and Sb were retained by a Dowex 2-X8 resin column in 6 M HCl. The effluent was passed through a TDO, tin dioxide column which retains As and Se in 3 M HCl medium. Radioactive tracers of these elements were used to determine the yields of the separation process. Certified reference materials were analyzed to check the precision and accuracy of the method. (author)

  2. Development of a radiochemical separation method for toxic elements determination from biologic samples

    International Nuclear Information System (INIS)

    Malhara, V.A.; Vasconcellos, M.B.A.; Favaro, D.I.T.; Armelin, M.J.A.

    1990-01-01

    In order to determine Hg, Sb, As and Se in biological materials by neutron activation analysis, a radiochemical separation was developed. The chemical separation procedure used was based on the digestion of the irradiated sample in a mixture of HNO 3 and H 2 SO 4 in a teflon bomb, at 130 0 C for 1 to 4 hours. After the dissolution of organic matter, Hg and Sb were retained by a Dowex 2-XB resin column in 6M HCI. The efluent was passed through a TDO, tin dioxide column which retains As and Se in 3M HCI medium. Radioactive tracers of these elements were used to determine the yields of the separation process. Certified reference materials were analyzed to check the precision and accuracy of the method. (author)

  3. Brand as a significant element of the regional development strategy at the example of Devin

    Directory of Open Access Journals (Sweden)

    Goranova Penka

    2015-01-01

    Full Text Available The idea of (regional branding is an important issue in modern business environment. Theoretical studies in this area are few, compared to research papers that have been dedicated to traditional brands and branding. A practical research on brand as an important element of regional development strategy can thus provide a series of useful information that marketers can use in their marketing strategies and in branding process in particular. The aim of this article is an assessment of regional branding, at the example of Devin. The article consists of two main parts. The first part focuses on defining regional branding and discussing why regional branding is important. The second part analyses the brand Devin and shows how a regional brand can evolve from a concept to reality.

  4. Development of a Three-Dimensional Spectral Element Model for NWP: Idealized Simulations on the Sphere

    Science.gov (United States)

    Viner, K.; Reinecke, P. A.; Gabersek, S.; Flagg, D. D.; Doyle, J. D.; Martini, M.; Ryglicki, D.; Michalakes, J.; Giraldo, F.

    2016-12-01

    NEPTUNE: the Navy Environmental Prediction sysTem Using the NUMA*corE, is a 3D spectral element atmospheric model composed of a full suite of physics parameterizations and pre- and post-processing infrastructure with plans for data assimilation and coupling components to a variety of Earth-system models. This talk will focus on the initial struggles and solutions in adapting NUMA for stable and accurate integration on the sphere using both the deep atmosphere equations and a newly developed shallow-atmosphere approximation, as demonstrated through idealized test cases. In addition, details of the physics-dynamics coupling methodology will be discussed. NEPTUNE results for test cases from the 2016 Dynamical Core Model Intercomparison Project (DCMIP-2016) will be shown and discussed. *NUMA: Nonhydrostatic Unified Model of the Atmosphere; Kelly and Giraldo 2012, JCP

  5. Development of dynamic explicit crystallographic homogenization finite element analysis code to assess sheet metal formability

    International Nuclear Information System (INIS)

    Nakamura, Yasunori; Tam, Nguyen Ngoc; Ohata, Tomiso; Morita, Kiminori; Nakamachi, Eiji

    2004-01-01

    The crystallographic texture evolution induced by plastic deformation in the sheet metal forming process has a great influence on its formability. In the present study, a dynamic explicit finite element (FE) analysis code is newly developed by introducing a crystallographic homogenization method to estimate the polycrystalline sheet metal formability, such as the extreme thinning and 'earing'. This code can predict the plastic deformation induced texture evolution at the micro scale and the plastic anisotropy at the macro scale, simultaneously. This multi-scale analysis can couple the microscopic crystal plasticity inhomogeneous deformation with the macroscopic continuum deformation. In this homogenization process, the stress at the macro scale is defined by the volume average of those of the corresponding microscopic crystal aggregations in satisfying the equation of motion and compatibility condition in the micro scale 'unit cell', where the periodicity of deformation is satisfied. This homogenization algorithm is implemented in the conventional dynamic explicit finite element code by employing the updated Lagrangian formulation and the rate type elastic/viscoplastic constitutive equation.At first, it has been confirmed through a texture evolution analyses in cases of typical deformation modes that Taylor's 'constant strain homogenization algorithm' yields extreme concentration toward the preferred crystal orientations compared with our homogenization one. Second, we study the plastic anisotropy effects on 'earing' in the hemispherical cup deep drawing process of pure ferrite phase sheet metal. By the comparison of analytical results with those of Taylor's assumption, conclusions are drawn that the present newly developed dynamic explicit crystallographic homogenization FEM shows more reasonable prediction of plastic deformation induced texture evolution and plastic anisotropy at the macro scale

  6. 76 FR 46298 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-08-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held virtually on August 17, 2011...

  7. 77 FR 16035 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-03-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on March 27, 2012, from 9 a.m...

  8. 76 FR 79684 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-12-22

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on January 25, 2012, from 9 a...

  9. 76 FR 50734 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-08-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on September 28, 2011, from 9...

  10. 77 FR 2727 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-01-19

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on February 29, 2012, from 9...

  11. 77 FR 15760 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-03-16

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on April 18, 2012, from 9 a.m...

  12. 75 FR 21629 - HIT Standards Committee's Workgroup Meetings; Notice of Meetings

    Science.gov (United States)

    2010-04-26

    ... Technology; HIT Standards Committee's Workgroup Meetings; Notice of Meetings AGENCY: Office of the National... only. Name of Committees: HIT Standards Committee's Workgroups: Clinical Operations Vocabulary... developed by the HIT Policy Committee. Date and Time: The HIT Standards Committee Workgroups will hold the...

  13. 76 FR 14976 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-03-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on April 20, 2011, from 9 a.m...

  14. 76 FR 70455 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-11-14

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on December 14, 2011, from 9...

  15. 76 FR 39109 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-07-05

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on July 20, 2011, from 9 a.m...

  16. 77 FR 73661 - HIT Standards Committee Advisory Meetings; Notice of Meetings

    Science.gov (United States)

    2012-12-11

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meetings; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: These meetings will be held on the following dates and...

  17. 76 FR 28782 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-05-18

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on June 22, 2011, from 9 a.m...

  18. 77 FR 27459 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-05-10

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on June 20, 2012, from 9 a.m...

  19. 77 FR 37408 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-06-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... be open to the public. Name of Committee: HIT Standards Committee. General Function of the Committee... with policies developed by the HIT Policy Committee. Date and Time: The meeting will be held on July 19...

  20. 77 FR 22787 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-04-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on May 24, 2012, from 9 a.m...

  1. 76 FR 46297 - HIT Standards Committee's Workgroup Meetings; Notice of Meetings

    Science.gov (United States)

    2011-08-02

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee's Workgroup Meetings; Notice of... be open to the public via dial-in access only. Name of Committees: HIT Standards Committee's... developed by the HIT Policy Committee. Date and Time: The HIT Standards Committee Workgroups will hold the...

  2. 77 FR 65691 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-10-30

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on November 13, 2012, from 9...

  3. 77 FR 50690 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-08-22

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on September 19, 2012, from 9...

  4. 76 FR 22396 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-04-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on May 18, 2011, from 9 a.m...

  5. 76 FR 55913 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-09-09

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: to provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held virtually on October 21, 2011...

  6. 77 FR 60438 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-10-03

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on October 17, 2012, from 9 a...

  7. 77 FR 65690 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-10-30

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on December 19, 2012, from 9...

  8. 76 FR 9783 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2011-02-22

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on March 29, 2011, from 9 a.m...

  9. 77 FR 45353 - HIT Standards Committee Advisory Meeting; Notice of Meeting

    Science.gov (United States)

    2012-07-31

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee Advisory Meeting; Notice of... public. Name of Committee: HIT Standards Committee. General Function of the Committee: To provide... developed by the HIT Policy Committee. Date and Time: The meeting will be held on August 15, 2012, from 9:00...

  10. Ensuring due process in the IACUC and animal welfare setting: considerations in developing noncompliance policies and procedures for institutional animal care and use committees and institutional officials.

    Science.gov (United States)

    Hansen, Barbara C; Gografe, Sylvia; Pritt, Stacy; Jen, Kai-Lin Catherine; McWhirter, Camille A; Barman, Susan M; Comuzzie, Anthony; Greene, Molly; McNulty, Justin A; Michele, Daniel Eugene; Moaddab, Naz; Nelson, Randall J; Norris, Karen; Uray, Karen D; Banks, Ron; Westlund, Karin N; Yates, Bill J; Silverman, Jerald; Hansen, Kenneth D; Redman, Barbara

    2017-10-01

    Every institution that is involved in research with animals is expected to have in place policies and procedures for the management of allegations of noncompliance with the Animal Welfare Act and the U.S. Public Health Service Policy on the Humane Care and Use of Laboratory Animals. We present here a model set of recommendations for institutional animal care and use committees and institutional officials to ensure appropriate consideration of allegations of noncompliance with federal Animal Welfare Act regulations that carry a significant risk or specific threat to animal welfare. This guidance has 3 overarching aims: 1 ) protecting the welfare of research animals; 2 ) according fair treatment and due process to an individual accused of noncompliance; and 3 ) ensuring compliance with federal regulations. Through this guidance, the present work seeks to advance the cause of scientific integrity, animal welfare, and the public trust while recognizing and supporting the critical importance of animal research for the betterment of the health of both humans and animals.-Hansen, B. C., Gografe, S., Pritt, S., Jen, K.-L. C., McWhirter, C. A., Barman, S. M., Comuzzie, A., Greene, M., McNulty, J. A., Michele, D. E., Moaddab, N., Nelson, R. J., Norris, K., Uray, K. D., Banks, R., Westlund, K. N., Yates, B. J., Silverman, J., Hansen, K. D., Redman, B. Ensuring due process in the IACUC and animal welfare setting: considerations in developing noncompliance policies and procedures for institutional animal care and use committees and institutional officials. © FASEB.

  11. DEVELOPMENT OF LOW-COST MANUFACTURING PROCESSES FOR PLANAR, MULTILAYER SOLID OXIDE FUEL CELL ELEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Scott Swartz; Matthew Seabaugh; William Dawson; Harlan Anderson; Tim Armstrong; Michael Cobb; Kirby Meacham; James Stephan; Russell Bennett; Bob Remick; Chuck Sishtla; Scott Barnett; John Lannutti

    2004-06-12

    This report summarizes the results of a four-year project, entitled, ''Low-Cost Manufacturing Of Multilayer Ceramic Fuel Cells'', jointly funded by the U.S. Department of Energy, the State of Ohio, and by project participants. The project was led by NexTech Materials, Ltd., with subcontracting support provided by University of Missouri-Rolla, Michael A. Cobb & Co., Advanced Materials Technologies, Inc., Edison Materials Technology Center, Gas Technology Institute, Northwestern University, and The Ohio State University. Oak Ridge National Laboratory, though not formally a subcontractor on the program, supported the effort with separate DOE funding. The objective of the program was to develop advanced manufacturing technologies for making solid oxide fuel cell components that are more economical and reliable for a variety of applications. The program was carried out in three phases. In the Phase I effort, several manufacturing approaches were considered and subjected to detailed assessments of manufacturability and development risk. Estimated manufacturing costs for 5-kW stacks were in the range of $139/kW to $179/kW. The risk assessment identified a number of technical issues that would need to be considered during development. Phase II development work focused on development of planar solid oxide fuel cell elements, using a number of ceramic manufacturing methods, including tape casting, colloidal-spray deposition, screen printing, spin-coating, and sintering. Several processes were successfully established for fabrication of anode-supported, thin-film electrolyte cells, with performance levels at or near the state-of-the-art. The work in Phase III involved scale-up of cell manufacturing methods, development of non-destructive evaluation methods, and comprehensive electrical and electrochemical testing of solid oxide fuel cell materials and components.

  12. HIGHLY QUALIFIED WORKING FORCE – KEY ELEMENT OF INNOVATIVE DEVELOPMENT MODEL

    Directory of Open Access Journals (Sweden)

    M. Avksientiev

    2014-12-01

    Full Text Available Highly qualified working force is a central element of intensive development model in modern society. The article surveys the experience of countries that managed to transform their economy to the innovative one. Ukrainian economy cannot stand aside processes that dominate the world economy trends, thus we are to use this experience to succeed in future. Today any government of the world is facing challenges that occur due to transformation of the economy into informational one. This type of economy causes its transformation form extensive to intensive one. The main reasons under that is limitation of nature resources, material factors of production. Thus this approach depends much on the quality of working force. Unfortunately in Ukraine there is a misbalance in specialist preparation. This puts additional pressure on the educational sphere also. In order to avoid this pressure we are to conduct reforms in education sphere. Nowadays, in the world views and concepts of governmental role in the social development are changing. This why, even at times of economic recession educational costs are not reduced under the new economical doctrine in the EU. Highly qualified specialists, while creating new products and services play role of engineers in XXI century. They are to lead their industries to world leading positions. From economic point of view, highly qualified specialists benefit society with higher income rates, taxation and thus, increasing the living standards in society. Thus, the majority if modern scientists prove the importance of highly trained working force for more effective economic development.

  13. Information needs of engineers. The methodology developed by the WFEO Committee on Engineering Information and the use of value analysis for improving information services

    International Nuclear Information System (INIS)

    Darjoto, S.W.; Martono, A.; Michel, J.

    1990-05-01

    The World Federation of Engineering Organizations - WFEO - through the work of its Committee on Engineering Information, aims at improving the efficiency of engineers and particularly at developing new attitudes and practices concerning the specialized information mastering. One important part of the WFEO/CEI programme of activities during the last years and for the next years was and is devoted to a better understanding of the information needs of engineers. But also, it seems now essential to WFEO/CEI to better evaluate information services in order to correctly adapt them to the identified needs of engineers. The following communication will emphasize these two main and related perspectives: identifying the information needs of engineers; developing Value Analysis approaches for engineering information services. (author). 3 refs

  14. PERSPECTIVES OF THE DEVELOPMENT OF AGRICULTURE OF THE RUSSIA IN MODERN TIMES. RESULT OF WORK OF THE COMMITTEE OF THE STATE DUMA ON NATURAL RESOURCES, MANAGEMENT AND ECOLOGY

    Directory of Open Access Journals (Sweden)

    V. I. Kashin

    2016-01-01

    Full Text Available The perspectives of the development of agriculture in Russia in modern times and main results of work of the Committee of the State Duma on Natural Resources, Management and Ecology are presented in the article. For the purpose of food sovereignty, the import ration should not be exceeded 25% from overall volume of food production. The Russian Academy of Agricultural Science worked on the potential of agricultural sector, which has to be the duty-bearer of food supply security of Russia and the source of raw materials for the trade. Up to now, the Russian scientists have developed a lot of competitive varieties and hybrids, widespread commercial introduction of which is able to guarantee of high quality products.

  15. Information needs of engineers. The methodology developed by the WFEO Committee on Engineering Information and the use of value analysis for improving information services

    Energy Technology Data Exchange (ETDEWEB)

    Darjoto, S W [Indonesian Inst. of Sciences, Bandung (Indonesia); Martono, A [Indonesian Inst. of Engineers, Jakarta (Indonesia); Michel, J [Ecole Nationale des Ponts et Chaussees, Paris (France)

    1990-05-01

    The World Federation of Engineering Organizations - WFEO - through the work of its Committee on Engineering Information, aims at improving the efficiency of engineers and particularly at developing new attitudes and practices concerning the specialized information mastering. One important part of the WFEO/CEI programme of activities during the last years and for the next years was and is devoted to a better understanding of the information needs of engineers. But also, it seems now essential to WFEO/CEI to better evaluate information services in order to correctly adapt them to the identified needs of engineers. The following communication will emphasize these two main and related perspectives: identifying the information needs of engineers; developing Value Analysis approaches for engineering information services. (author). 3 refs.

  16. 76 FR 61713 - Pediatric Oncology Subcommittee of the Oncologic Drugs Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-10-05

    ...] Pediatric Oncology Subcommittee of the Oncologic Drugs Advisory Committee; Notice of Meeting AGENCY: Food... of Committee: Pediatric Oncology Subcommittee of the Oncologic Drugs Advisory Committee. General... adult oncology indication, or in late stage development in pediatric patients with cancer. The...

  17. Finite element modelling of stress development during deposition of ion assisted coatings

    International Nuclear Information System (INIS)

    Ward, D.J.; Arnell, R.D.

    2002-01-01

    Ion assisted physical vapour deposited (IAPVD) films typically have a high state of residual stress. This residual stress comprises two components: a thermal stress, which forms as the system cools to room temperature; and an intrinsic stress which is caused by the processes of deposition. Much work has been published on the tribology and mechanical behaviour of surface coatings without consideration of the residual stress. It was therefore considered desirable to develop a finite element (FE) simulation to be used either as a precursor to any realistic mechanical study of the behaviour of such surface coatings, or to be used as a tool to study the effects of varying the deposition parameters. Previous experimental work has shown that the residual stress is related to deposition parameters, such as incident ion and atom fluxes and energies, and recent molecular dynamics studies have indicated that trapped inert gas species may play a major role in the mechanism for creation of the intrinsic stress. The FE simulation assumes that the processes of ion bombardment and material deposition are consecutive, but as the analysis time step tends to zero this assumption approximates the simultaneity of the processes. Suitable mathematical descriptions are employed in the bombarded region of the growing coating to simulate the macroscopic effects of the microscopic atomic collision phenomena and diffusion processes. Two finite element simulations are presented. The first is based on an analytical model, which has gained popular acceptance and this was presented in a previous year at this conference. The second builds on this to simulate wider aspects of known behaviour and is presented in this follow-up paper. The predicted trends of mean stress and its distribution are similar to those observed in published experimental work

  18. The committee of scientific expertise coordination

    International Nuclear Information System (INIS)

    2003-01-01

    Placed under the MIES control, the Committee of scientific expertise coordination defines the needs, the contain and the planing of expertises realized in function of Climate national and international decisions and negotiations calendars. The Committee verifies the different expertises and offers the administrations, scientific tools and techniques useful for the negotiations. It can also define long-dated research needs which require the scientific community mobilization. This paper provides some document of the Committee: objectives, operating and priorities of the Committee, scenarios ''Factor 4'' and ''crack technology'', perceptions and practices, developing countries (China, India...), Euromed. (A.L.B.)

  19. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  20. The Investment Committee. Effective Committees. Board Basics.

    Science.gov (United States)

    Biggs, John H.

    1997-01-01

    The investment committee of the college or university governing board is charged with determining, overseeing, and assessing the policies and processes by which institutional funds are invested. The committee has fiduciary duty to ensure that the terms of investment of donors' gifts are met and to maximize investment returns within an appropriate…

  1. The role of municipal committees in the development of an integrated urban water policy in Belo Horizonte, Brazil.

    Science.gov (United States)

    Costa, G M; Costa, H S M; Dias, J B; Welter, M G

    2009-01-01

    This paper discusses the challenges involved in adopting an integrated approach to urban water policies and management, a particularly problematic issue in Brazil due to the incomplete nature of urbanization, defined as the lack of adequate and/or universalized access to infrastructure and services, informal housing and conflicts between environmental protection and social housing needs. In the last two decades strong social movements have influenced urban environmental policies from national to local levels. In Belo Horizonte since 1993, decision-making processes have involved important mechanisms of democratic inclusion, which have contributed to fairer urban policies. A brief discussion of the concept of governance follows, introducing the municipal urban policy within which drainage and sanitation policies have been implemented. This paper presents the constitutional and institutional role of the five municipal committees dealing with water governance issues, as they are important arenas for civil society participation. The main constraints to achieving integrated urban water governance at the local level and the extent to which such policies are able to reduce social inequalities and promote social environmental justice in the use and appropriation of urban water, are discussed. This paper is part of the SWITCH-Sustainable Water Management Improves Tomorrow's Cities' Health-research network.

  2. Experience of developing the imitators of the fuel element for the WWER reactors

    International Nuclear Information System (INIS)

    Balashov, S.M.; Boltenko, Eh.A.; Vinogradov, V.A.

    1998-01-01

    Peculiarities of designs of fuel elements imitators for the WWER-type reactors of nominal capacity and with single-ended current feed positioning are considered. The data on the filler heat conductivity and the results of tests and application of the fuel elements imitators at various testing facilities are presented. The possibility of equipping one of the non operating WWER reactors with the fuel element imitators for conduct of large-scale experiment is indicated

  3. Development of synthetic selfish elements based on modular nucleases in Drosophila melanogaster

    OpenAIRE

    Simoni, A; Siniscalchi, C; Chan, Y-S; Huen, DS; Russell, S; Windbichler, N; Crisanti, A

    2014-01-01

    Selfish genes are DNA elements that increase their rate of genetic transmission at the expense of other genes in the genome and can therefore quickly spread within a population. It has been suggested that selfish elements could be exploited to modify the genome of entire populations for medical and ecological applications. Here we report that transcription activator-like effector nuclease (TALEN) and zinc finger nuclease (ZFN) can be engineered into site-specific synthetic selfish elements (S...

  4. The development of a collaborative virtual environment for finite element simulation

    Science.gov (United States)

    Abdul-Jalil, Mohamad Kasim

    Element Analysis module, such as is demonstrated in this work). One of the major issues in developing a CVE system for engineering design purposes is to obtain any pertinent simulation results in real-time. This is critical so that the designers can make decisions based on these results quickly. For example, in a finite element analysis, if a design model is changed or perturbed, the analysis results must be obtained in real-time or near real-time to make the virtual meeting environment realistic. In this research, the finite difference-based Design Sensitivity Analysis (DSA) approach is employed to approximate structural responses (i.e. stress, displacement, etc), so as to demonstrate the applicability of CVRoom for engineering design trade-offs. This DSA approach provides for fast approximation and is well-suited for the virtual meeting environment where fast response time is required. The DSA-based approach is tested on several example test problems to show its applicability and limitations. This dissertation demonstrates that an increase in efficiency and reduction of time required for a complex design processing can be accomplished using the approach developed in this dissertation research. Several implementations of CVRoom by students working on common design tasks were investigated. All participants confirmed the preference of using the collaborative virtual environment developed in this dissertation work (CVRoom) over other modes of interactions. It is proposed here that CVRoom is representative of the type of collaborative virtual environment that will be used by most designers in the future to reduce the time required in a design cycle and thereby reduce the associated cost.

  5. Development of computer models for fuel element behaviour in water reactors

    International Nuclear Information System (INIS)

    Gittus, J.H.

    1987-03-01

    Description of fuel behaviour during normal operation transients and accident conditions has always represented a most challenging and important problem. Reliable predictions constitute a basic demand for safety based calculations, for design purposes and for fuel performance. Therefore, computer codes based on deterministic and probabilistic models were developed. Possibility of comprehensive descriptions of the phenomena is precluded in view of the great number of individual processes, involving physical, chemical, thermohydraulical and mechanical parameters, to be considered in a wide range of situations. In case of fast thermal transients predictive capability is limited by the kinetics of evolution of the system and its eventual dynamic behaviour. Evidently, probabilistic approaches are also limited by the sparcity and limited breadth of the impirical data base. Code predictions have to be evaluated against power reactor data, results from simulation experiments and, if possible, include cross validation of different codes and validation of sub-models. Progress on this subject is reviewed in this report, which completes the co-ordinated research programme on 'Development of Computer Models for Fuel Element Behaviour in Water Reactors' (D-COM), initiated under the auspices of the IAEA in 1981

  6. Development of Uranium-Carrying Ball method for calibration of fuel element failure detecting systems

    International Nuclear Information System (INIS)

    Liu Yupu; Bao Wanping; Lu Cungang

    1988-01-01

    A Uranium-Carrying Ball method used for the determination of sensitivity, stability of the fuel element failure detecting systems is developed. A special facility for transporting the ball can be carried out by the flow of the cooling water, so that the failure signal can be simulated. Five different types of the Uranium-Carrying Ball have been developed. Type-I to Type-IV may provide failure signal in terms of uranium quantity or exposure area of uranium. Type-V can be used to simulate micro-flaw and examine the detectability of various detective methods for this kind of defect, at the same time it is difficult for the delayed neutron detector to detect micro-flaw. The results of long-time irradiation and washing test show that the working life of the balls is satisfactory. Using the experimentel facility with the balls, detailed study of the capability of various fuel failure detecting systems have been conducted successfully. The operation is easy and safe, the accuracy of this method is higher than that of other methods, the nuclear fuel consumption as well as the radioactive contamination is low. At present, the research on the failure mechanism is being conducted by means of this method

  7. Changes and events in uranium deposit development, exploration, resources, production and the world supply-demand relationship. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-09-01

    This report consists of the proceedings of the Technical Committee Meeting on Recent Changes and Events in Uranium Deposit Development, Exploration, Resources, Production and the World Supply/Demand Relationship, held in co-operation with the OECD Nuclear Energy Agency (OECD/NEA) in Kiev, Ukraine, from 22 to 26 May 1995. Some of the information from this meeting was also used in preparation of the 1995 edition of ''Uranium - Resources, Production and Demand'' a joint report by the OECD/NEA and the IAEA. At the Beginning of 1995 there were 432 nuclear power plants in operation with a combined electricity generating capacity of 340 GW(e). This represents nearly a 100% increase over the last decade. In 1995 over 2228 TW·h of electricity were generated, equivalent to about 17% of the world's total electricity. To achieve this, about 61,000 t U were required as nuclear fuel. For about a decade and a half uranium production and related activities have been decreasing because of declining uranium prices. For many participants in the nuclear industry there has been little interest in uranium supply because of the oversupplied market condition. The declining production led to the development of a supply and demand balance were production is currently meeting a little over 50% of reactor requirements and the excess inventory is being rapidly drawn down. This very unstable relationship has resulted in great uncertainty about the future supply or uranium. One of the objectives of this Technical Committee meeting was to bring together specialists in the field of uranium supply and demand to collect information on new developments. This helps provide a better understanding of the current situation, as well as providing information to plan for the future. Refs, figs, tabs

  8. American Academy of Pediatrics Guidelines for Infant Bioethics Committees.

    Science.gov (United States)

    College and University, 1985

    1985-01-01

    Examples are given of points hospitals must consider when adopting and implementing infant bioethics committees, including committee functions (educational, policy development, and consultative), structure, membership, jurisdiction, recordkeeping, and legal issues. (MSE)

  9. Development and validation of a 10-year-old child ligamentous cervical spine finite element model.

    Science.gov (United States)

    Dong, Liqiang; Li, Guangyao; Mao, Haojie; Marek, Stanley; Yang, King H

    2013-12-01

    Although a number of finite element (FE) adult cervical spine models have been developed to understand the injury mechanisms of the neck in automotive related crash scenarios, there have been fewer efforts to develop a child neck model. In this study, a 10-year-old ligamentous cervical spine FE model was developed for application in the improvement of pediatric safety related to motor vehicle crashes. The model geometry was obtained from medical scans and meshed using a multi-block approach. Appropriate properties based on review of literature in conjunction with scaling were assigned to different parts of the model. Child tensile force-deformation data in three segments, Occipital-C2 (C0-C2), C4-C5 and C6-C7, were used to validate the cervical spine model and predict failure forces and displacements. Design of computer experiments was performed to determine failure properties for intervertebral discs and ligaments needed to set up the FE model. The model-predicted ultimate displacements and forces were within the experimental range. The cervical spine FE model was validated in flexion and extension against the child experimental data in three segments, C0-C2, C4-C5 and C6-C7. Other model predictions were found to be consistent with the experimental responses scaled from adult data. The whole cervical spine model was also validated in tension, flexion and extension against the child experimental data. This study provided methods for developing a child ligamentous cervical spine FE model and to predict soft tissue failures in tension.

  10. TECHNOLOGICAL ELEMENTS OF THE SYSTEM OF STRATEGIC PLANNING AS TOOLS FOR PROVIDING THE ECONOMIC DEVELOPMENT OF THE SERVICES SPHERE

    Directory of Open Access Journals (Sweden)

    V. V. Gromov

    2015-01-01

    Full Text Available Topicality article is to determine the composition of the technological elements of the strategic planning system, the interaction of which is aimed at achieving the planned economic results in the changing factors influence macro microenvironments on the activities of institutions and economic activities of services. The articles structurally is made on the basis of respect for the logical sequence of interactions of technological elements of strategic planning and combat their negative factors of external and internal environment. Active interaction of technological elements of strategic planning tools is to ensure long-term development planning authorities of economic entities, economic activities service sector for sustainable economic growth. Contribution of the author in the scope of this article is to generalize the definition of the target composition and installation of technological elements of strategic planning and development institutions and industry components of the service sector.

  11. Food as an element in developing tourist experiences. A case study of the Finnmark region in Northern Norway

    OpenAIRE

    Kristensen, Alita Dagmar

    2017-01-01

    The focus on food as a significant element and topic in tourism and tourists’ experiences has increased. How tourists experience food has changed together with tourists’ motivation and needs. Current findings indicate that tourists seek and expect to find local food experiences while travelling to a new destination. This thesis aims to build knowledge on how food as an element in tourism play a role for the tourism and hospitality industry, and their development of relevant tourist produ...

  12. Advisory Committee Handbook.

    Science.gov (United States)

    Black Hawk Coll., Moline, IL.

    An advisory committee is generally comprised of persons outside the education profession who have specialized knowledge in a given area. The committee advises, makes recommendations, and gives service to the college and its students, instructors, and administrators. At Black Hawk College, there are four types of advisory committees: community,…

  13. Deleterious role of trace elements - Silica and lead in the development of chronic kidney disease.

    Science.gov (United States)

    Mascarenhas, Starlaine; Mutnuri, Srikanth; Ganguly, Anasuya

    2017-06-01

    Chronic-Kidney-Disease of Unknown-etiology (CKDu) has been reported in developing-countries like Sri-Lanka, India and Central-America without sparing the Indian sub-district (namely Canacona) located in south-Goa. The disease etiology is unlinked to common causes of diabetes and hypertension and assumed to be environmentally induced due to its asymptomatic-nature and occurrence in groundwater relying communities. This study aimed to understand environmental risk-factors underlying CKDu-etiology using Indian sub-district (Canacona) as case-study. Biochemical-analysis of CKDu-affected and non-affected individual's blood and detailed hydro-geochemical analyses of CKDu-affected and non-affected region's groundwater (drinking-water)were conducted. Trace geogenic-element-silica was highly dominant in affected-region's groundwater, thus its nephrotoxic-potential was analysed via in-vitro cytotoxicity-assays on human-kidney-cell-lines. All CKDu-affected-subjects showed increased-levels of serum-urea (52.85 mM),creatinine (941.5 μM),uric-acid (1384.5 μM), normal blood-glucose (4.65 mM), being distinct biomarkers of environmentally-induced CKD-'chronic-tubulo-interstitial-nephritis'. Affected-subjects reported high blood-lead levels (1.48 μM)suggesting direct-nephrotoxicity resulting in impaired blood-clearance and also exhibits indirect-nephrotoxicity by disrupting calcium-homeostasis causing skeletal-disorders and prolonged-consumption of NSAID's (pain-alleviation), indirectly causing renal-damage. Affected-region's groundwater was acidic (pH-5.6), resulting in borderline-lead (9.98 μgL -1 ) and high-silica (115.5 mgL -1 )contamination. Silica's bio-availability (determining its nephrotoxicity) was enhanced at groundwater's acidic-pH and Ca-Mg-deficient-composition (since these cations complex with silica reducing bioavailability). Silica exhibited renal-proximal-tubular-cytotoxicity on long-term exposure comparable with affected-region's groundwater silica

  14. Progress in design, research and development and testing of safety systems for advanced water cooled reactors. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-04-01

    The meeting covered the following topics: Developments in design of safety-related heat removal components and systems for advanced water cooled reactors; status of test programmes on heat removal components and systems of new designs; range of validity and extrapolation of test results for the qualification of design/licensing computer models and codes for advanced water cooled reactors; future needs and trends in testing of safety systems for advanced water cooled reactors. Tests of heat removal safety systems have been conducted by various groups supporting the design, testing and certification of advanced water cooled reactors. The Technical Committee concluded that the reported test results generally confirm the predicted performance features of the advanced designs. Refs, figs, tabs

  15. Progress in design, research and development and testing of safety systems for advanced water cooled reactors. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    The meeting covered the following topics: Developments in design of safety-related heat removal components and systems for advanced water cooled reactors; status of test programmes on heat removal components and systems of new designs; range of validity and extrapolation of test results for the qualification of design/licensing computer models and codes for advanced water cooled reactors; future needs and trends in testing of safety systems for advanced water cooled reactors. Tests of heat removal safety systems have been conducted by various groups supporting the design, testing and certification of advanced water cooled reactors. The Technical Committee concluded that the reported test results generally confirm the predicted performance features of the advanced designs. Refs, figs, tabs.

  16. Development of Quality Assurance System and Element for Digital I and C

    International Nuclear Information System (INIS)

    Kim, K. H.; Park, C. K.; Ha, J. H.; Kwon, H. I.

    2008-06-01

    The Quality Assurance system should play an importance role in order to create safety operation. And management of KNICS R and D should have strong leadership to build he safety mind and quality mind. Quality assurance system can help to develop safety management system and to create a positive safety culture in operating organization of nuclear development. The establishment and implementation of QA system is prerequisite for achieving goals of the worker's health, quality, environment and public acceptance in operation of nuclear facilities whether they are regulated by the governmental requirements or not. The focus of nuclear QA system is brought on establishment of an appropriate system and assurance of implementation of the system by continuous improvement of quality problems. As for QA activities related to nuclear R and D, we set up QA systems and supported implementation of the system. We conducted periodic audit of KNICS projects related to safety system development and took corrective actions according to the result. Radiation exposure riskiness of the KAERI's nuclear facilities is lower than that of nuclear power plant and they are more safe. But their safety have being supervised by regulatory body in compliance with laws and technical requirements of nuclear power plant. The present QA system should be changed to an integrated safety management system where elements of environment management, safety management and quality management are complimentarily interacting, and thus meet legal requirements. It is necessary to compare subsystems with KNICS QA and management system requirements to improve the effectiveness of existing implementing procedures in other KNICS projects.

  17. Foundational Elements of Applied Simulation Theory: Development and Implementation of a Longitudinal Simulation Educator Curriculum.

    Science.gov (United States)

    Chiu, Michelle; Posner, Glenn; Humphrey-Murto, Susan

    2017-01-27

    Simulation-based education has gained popularity, yet many faculty members feel inadequately prepared to teach using this technique. Fellowship training in medical education exists, but there is little information regarding simulation or formal educational programs therein. In our institution, simulation fellowships were offered by individual clinical departments. We recognized the need for a formal curriculum in educational theory. Kern's approach to curriculum development was used to develop, implement, and evaluate the Foundational Elements of Applied Simulation Theory (FEAST) curriculum. Needs assessments resulted in a 26-topic curriculum; each biweekly session built upon the previous. Components essential to success included setting goals and objectives for each interactive session and having dedicated faculty, collaborative leadership and administrative support for the curriculum. Evaluation data was collated and analyzed annually via anonymous feedback surveys, focus groups, and retrospective pre-post self-assessment questionnaires. Data collected from 32 fellows over five years of implementation showed that the curriculum improved knowledge, challenged thinking, and was excellent preparation for a career in simulation-based medical education. Themes arising from focus groups demonstrated that participants valued faculty expertise and the structure, practicality, and content of the curriculum. We present a longitudinal simulation educator curriculum that adheres to a well-described framework of curriculum development. Program evaluation shows that FEAST has increased participant knowledge in key areas relevant to simulation-based education and that the curriculum has been successful in meeting the needs of novice simulation educators. Insights and practice points are offered for educators wishing to implement a similar curriculum in their institution.

  18. A Cellular Automaton / Finite Element model for predicting grain texture development in galvanized coatings

    Science.gov (United States)

    Guillemot, G.; Avettand-Fènoël, M.-N.; Iosta, A.; Foct, J.

    2011-01-01

    Hot-dipping galvanizing process is a widely used and efficient way to protect steel from corrosion. We propose to master the microstructure of zinc grains by investigating the relevant process parameters. In order to improve the texture of this coating, we model grain nucleation and growth processes and simulate the zinc solid phase development. A coupling scheme model has been applied with this aim. This model improves a previous two-dimensional model of the solidification process. It couples a cellular automaton (CA) approach and a finite element (FE) method. CA grid and FE mesh are superimposed on the same domain. The grain development is simulated at the micro-scale based on the CA grid. A nucleation law is defined using a Gaussian probability and a random set of nucleating cells. A crystallographic orientation is defined for each one with a choice of Euler's angle (Ψ,θ,φ). A small growing shape is then associated to each cell in the mushy domain and a dendrite tip kinetics is defined using the model of Kurz [2]. The six directions of basal plane and the two perpendicular directions develop in each mushy cell. During each time step, cell temperature and solid fraction are then determined at micro-scale using the enthalpy conservation relation and variations are reassigned at macro-scale. This coupling scheme model enables to simulate the three-dimensional growing kinetics of the zinc grain in a two-dimensional approach. Grain structure evolutions for various cooling times have been simulated. Final grain structure has been compared to EBSD measurements. We show that the preferentially growth of dendrite arms in the basal plane of zinc grains is correctly predicted. The described coupling scheme model could be applied for simulated other product or manufacturing processes. It constitutes an approach gathering both micro and macro scale models.

  19. 76 FR 66282 - Army Educational Advisory Committee

    Science.gov (United States)

    2011-10-26

    ... Committee: U.S. Army War College Subcommittee of the Army Education Advisory Committee. Dates of Meeting: November 15, 2011. Place of Meeting: U.S. Army War College, 122 Forbes Avenue, Carlisle, PA, Command... issues and matters related to the continued growth and development of the United States Army War College...

  20. CORPORATE TRAINING AS AN ELEMENT OF FORMATION AND DEVELOPMENT OF LABOUR RESOURCES IN THE INNOVATION ECONOMY

    Directory of Open Access Journals (Sweden)

    Gorelova I. N.

    2016-09-01

    Full Text Available At the present stage of formation of innovative economy professional development of the employee becomes a point of refraction of the interests of the company, Corporation in which they operate, and the employee. The article considers the relationship of the concept of formation of human resources and corporate training, which is often seen as something separate, organized exclusively for the benefit of the business. The definition of corporate training, task lists, structure, advantages and disadvantages. Examples of systems of corporate training at Omsk enterprises, basic (corporate departments, corporate universities, and resource centers. Considered in detail the interaction between enterprises and educational institutions. Statistics of participation of Omsk universities in the system of additional education, collected by the author. Attention is paid to the importance that corporate training and its individual methods, such as «learning by doing», has in the modern innovation economy. The result of the study is the inclusion of corporate training as one of the key elements of the modern formation of human resources.

  1. Development of Multi-Scale Finite Element Analysis Codes for High Formability Sheet Metal Generation

    International Nuclear Information System (INIS)

    Nnakamachi, Eiji; Kuramae, Hiroyuki; Ngoc Tam, Nguyen; Nakamura, Yasunori; Sakamoto, Hidetoshi; Morimoto, Hideo

    2007-01-01

    In this study, the dynamic- and static-explicit multi-scale finite element (F.E.) codes are developed by employing the homogenization method, the crystalplasticity constitutive equation and SEM-EBSD measurement based polycrystal model. These can predict the crystal morphological change and the hardening evolution at the micro level, and the macroscopic plastic anisotropy evolution. These codes are applied to analyze the asymmetrical rolling process, which is introduced to control the crystal texture of the sheet metal for generating a high formability sheet metal. These codes can predict the yield surface and the sheet formability by analyzing the strain path dependent yield, the simple sheet forming process, such as the limit dome height test and the cylindrical deep drawing problems. It shows that the shear dominant rolling process, such as the asymmetric rolling, generates ''high formability'' textures and eventually the high formability sheet. The texture evolution and the high formability of the newly generated sheet metal experimentally were confirmed by the SEM-EBSD measurement and LDH test. It is concluded that these explicit type crystallographic homogenized multi-scale F.E. code could be a comprehensive tool to predict the plastic induced texture evolution, anisotropy and formability by the rolling process and the limit dome height test analyses

  2. Development of a Single Detector Ring Micro Crystal Element Scanner: QuickPET II

    Directory of Open Access Journals (Sweden)

    Robert S. Miyaoka

    2005-04-01

    Full Text Available This article describes a single ring version of the micro crystal element scanner (MiCES and investigation of its spatial resolution imaging characteristics for mouse positron emission tomography (PET imaging. This single ring version of the MiCES system, referred to as QuickPET II, consists of 18 MiCE detector modules mounted as a single ring in a vertical gantry. The system has a 5.76-cm transverse field of view and a 1.98-cm axial field of view. In addition to the scanner and data acquisition system, we have developed an iterative reconstruction that includes a model of the system's detector response function. Evaluation images of line sources and mice have been acquired. Using filtered backprojection, the resolution for a reconstructed line source has been measured at 1.2 mm full width at half maximum. F-18-2-fluoro-2-deoxyglucose mouse PET images are provided. The result shows that QuickPET II has the imaging characteristics to support high-resolution, static mouse PET studies using 18-F labeled compounds.

  3. 78 FR 17466 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-03-21

    ... forty-fourth Session of the International Maritime Organization's (IMO) Sub-Committee on Standards of... of other IMO bodies --Validation of model training courses --Unlawful practices associated with... Vessel Personnel (STCW-F), 1995 --Development of Guidelines for wing-in-ground (WIG) craft --Role of the...

  4. Report from the Uranium Supply Committee

    International Nuclear Information System (INIS)

    1980-12-01

    Based on studies of world uranium supply made by NEA, IAEA and other national and international bodies the Danish Uranium Supply Committee has examined the uranium supply situation. The Committee concludes that there will be no lack of natural uranium in a period until year 2025 provided that more advanced and uranium economic reactors will be effiective from the beginning of the 21th century. However it will be necessary to discover new resources and to use low-grade uranium resources. Through long term contracts with the users the uranium producers should be urged to continue their production. The Committee recommends that uranium prospecting in Greenland continues in order to get a through knowledge of Greenlandic resources. The establishment of further reprocessing capacity should be speeded up, whereas the Committee do not foresee any shortages with regard to enrichment, conversion, and fuel element production. (BP)

  5. Critical elements in the development of cell therapy potency assays for ischemic conditions.

    Science.gov (United States)

    Porat, Yael; Abraham, Eytan; Karnieli, Ohad; Nahum, Sagi; Woda, Juliana; Zylberberg, Claudia

    2015-07-01

    A successful potency assay for a cell therapy product (CTP) used in the treatment of ischemic conditions should quantitatively measure relevant biological properties that predict therapeutic activity. This is especially challenging because of numerous degrees of complexity stemming from factors that include a multifactorial complex mechanism of action, cell source, inherent cell characteristics, culture method, administration mode and the in vivo conditions to which the cells are exposed. The expected biological function of a CTP encompasses complex interactions that range from a biochemical, metabolic or immunological activity to structural replacement of damaged tissue or organ. Therefore, the requirements for full characterization of the active substance with respect to biological function could be taxing. Moreover, the specific mechanism of action is often difficult to pinpoint to a specific molecular entity; rather, it is more dependent on the functionality of the cellular components acting in a in a multifactorial fashion. In the case of ischemic conditions, the cell therapy mechanism of action can vary from angiogenesis, vasculogenesis and arteriogenesis that may activate different pathways and clinical outcomes. The CTP cellular attributes with relation to the suggested mechanism of action can be used for the development of quantitative and reproducible analytical potency assays. CTPs selected and released on the basis of such potency assays should have the highest probability of providing meaningful clinical benefit for patients. This White Paper will discuss and give examples for key elements in the development of a potency assay for treatment of ischemic disorders treated by the use of CTPs. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  6. Report of Investigation Committee on Programs for Research and Development of Strategic Software for Advanced Computing; Kodo computing yo senryakuteki software no kenkyu kaihatsu program kento iinkai hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-26

    The committee met on December 26, 2000, with 32 people in attendance. Discussion was made on the results of surveys conducted for the development of strategic software for advanced computing and on candidate projects for strategic software development. Taken up at the meeting were eight subjects which were the interim report on the survey results, semiconductor TCAD (technology computer-aided design) system, nanodevice surface analysis system, network distribution parallel processing platform (tentative name), fatigue simulation system, chemical reaction simulator, protein structure analysis system, and a next-generation fluid analysis system. In this report, the author uses his own way in arranging the discussion results into the four categories of (1) a strategic software development system, (2) popularization method and maintenance system, (3) handling of the results, and (4) the evaluation of the program for research and development. In relation to category (1), it is stated that the software grows up with the passage of time, that the software is a commercial program, and that in the development of a commercial software program the process of basic study up to the preparation of a prototype should be completely separated from the process for its completion. (NEDO)

  7. Development of Graphical User Interface for Finite Element Analysis of Static Loading of a Column using MATLAB

    Directory of Open Access Journals (Sweden)

    Moses Omolayo PETINRIN

    2010-12-01

    Full Text Available In this work, the capability of MATLAB software package to develop graphical user interface (GUI package was demonstrated. A GUI was successfully developed using MATLAB programming language to study the behaviour of a suspended column under uniaxial static loading by solving the numerical model created based on the finite element method (FEM. The comparison between the exact solution from previous researches and the numerical analysis showed good agreement. The column average strain, average stress and average load are equivalent but more accurate to the ones obtained when the whole column is taken as one element (two nodes for one dimensional linear finite element problem. It was established in this work that MATLAB is not only a software package for numerical computation but also for application development.

  8. [Accreditation of Independent Ethics Committees].

    Science.gov (United States)

    Ramiro Avilés, Miguel A

    According to Law 14/2007 and Royal Decree 1090/2015, biomedical research must be assessed by an Research Ethics Committee (REC), which must be accredited as an Research ethics committee for clinical trials involving medicinal products (RECm) if the opinion is issued for a clinical trial involving medicinal products or clinical research with medical devices. The aim of this study is to ascertain how IEC and IECm accreditation is regulated. National and regional legislation governing biomedical research was analysed. No clearly-defined IEC or IECm accreditation procedures exist in the national or regional legislation. Independent Ethics Committees are vital for the development of basic or clinical biomedical research, and they must be accredited by an external body in order to safeguard their independence, multidisciplinary composition and review procedures. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  9. Development of filter element from nanocomposites of ultra high molar mass polyethylene having silver nanoparticles

    International Nuclear Information System (INIS)

    Bizzo, Maurizio A.; Wang, S. Hui

    2015-01-01

    The production of polymer based filter elements for water is widespread in the market but has an undesirable characteristic, they are not always efficient and capable of retaining or eliminating microorganisms. This paper proposes the production of filters with biocidal activity, comprised by nanocomposites of ultra-high molar mass polyethylene (UHMMPE) containing silver nanoparticles. The polymer is responsible for the uniform porous structure of the filter element and the Ag nanoparticles for its biocidal action. The filter elements were produced from two kinds of UHMMPE particles with different particle size distributions, one in the range of 150 to 200μm and the other of 300 to 400μm. Samples were collected from the obtained filter elements and characterized by X-ray diffractometry, scanning electron microscopy and microanalysis. The results indicated the formation of nanocomposite containing silver nanoparticles. (author)

  10. Development of a reconstruction software of elemental maps by micro X-ray fluorescence

    International Nuclear Information System (INIS)

    Almeida, Andre Pereira de; Braz, Delson; Mota, Carla Lemos; Oliveira, Luis Fernando de; Barroso, Regina Cely; Pinto, Nivia Graciele Villela; Cardoso, Simone Coutinho; Moreira, Silvana

    2009-01-01

    The technique of X-ray fluorescence (XRF) using SR microbeams is a powerful analysis tool for studying elemental composition in several samples. One application of this technique is the analysis done through the mapping of chemical elements forming a matrix of data. The aim of this work is the presentation of the program MapXRF, an in-house software designed to optimize the processing and mapping of fluorescence intensities data. This program uses spectra generated by QXAS as input data and separates the intensities of each chemical element found in the fluorescence spectra in files themselves. From these files, the program generates the intensity maps that can be visualized in any program of treatment of images. The proposed software was tested using fluorescence data obtained in the XRF beamline at National Synchrotron Light Laboratory (LNLS), Brazil. Automatic 2D scans were performed and element distribution maps were obtained in form of a matrix of data. (author)

  11. The development of low-temperature calorimeter on the Peltier elements

    Science.gov (United States)

    Baturevich, Tatyana; Tyagunin, Anatoly

    2017-09-01

    The article is devoted to the design of low-temperature calorimeter on the Peltier elements. This calorimeter can be used to study the temperature dependence of the specific heat capacity of different substances.

  12. Development of a reconstruction software of elemental maps by micro X-ray fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Andre Pereira de; Braz, Delson; Mota, Carla Lemos, E-mail: apalmeid@gmail.co, E-mail: delson@lin.ufrj.b, E-mail: clemos@con.ufrj.b [Universidade Federal do Rio de Janeiro (PEN/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Energia Nuclear; Oliveira, Luis Fernando de; Barroso, Regina Cely; Pinto, Nivia Graciele Villela, E-mail: cely@uerj.b, E-mail: lfolive@uerj.b, E-mail: nitatag@gmail.co [Universidade do Estado do Rio de Janeiro (IF/UERJ), RJ (Brazil). Inst. de Fisica; Cardoso, Simone Coutinho [Universidade Federal do Rio de Janeiro (IF/UFRJ), RJ (Brazil). Inst. de Fisica; Moreira, Silvana [Universidade Estadual de Campinas (FEC/UNICAMP), SP (Brazil) Faculdade de Engenharia Civil, Arquitetura e Urbanismo

    2009-07-01

    The technique of X-ray fluorescence (XRF) using SR microbeams is a powerful analysis tool for studying elemental composition in several samples. One application of this technique is the analysis done through the mapping of chemical elements forming a matrix of data. The aim of this work is the presentation of the program MapXRF, an in-house software designed to optimize the processing and mapping of fluorescence intensities data. This program uses spectra generated by QXAS as input data and separates the intensities of each chemical element found in the fluorescence spectra in files themselves. From these files, the program generates the intensity maps that can be visualized in any program of treatment of images. The proposed software was tested using fluorescence data obtained in the XRF beamline at National Synchrotron Light Laboratory (LNLS), Brazil. Automatic 2D scans were performed and element distribution maps were obtained in form of a matrix of data. (author)

  13. Core Competencies for Medical Teachers (KLM) – A Position Paper of the GMA Committee on Personal and Organizational Development in Teaching

    Science.gov (United States)

    Görlitz, Anja; Ebert, Thomas; Bauer, Daniel; Grasl, Matthäus; Hofer, Matthias; Lammerding-Köppel, Maria; Fabry, Götz

    2015-01-01

    Recent developments in medical education have created increasing challenges for medical teachers which is why the majority of German medical schools already offer educational and instructional skills trainings for their teaching staff. However, to date no framework for educational core competencies for medical teachers exists that might serve as guidance for the qualification of the teaching faculty. Against the background of the discussion about competency based medical education and based upon the international literature, the GMA Committee for Faculty and Organizational Development in Teaching developed a model of core teaching competencies for medical teachers. This framework is designed not only to provide guidance with regard to individual qualification profiles but also to support further advancement of the content, training formats and evaluation of faculty development initiatives and thus, to establish uniform quality criteria for such initiatives in German-speaking medical schools. The model comprises a framework of six competency fields, subdivided into competency components and learning objectives. Additional examples of their use in medical teaching scenarios illustrate and clarify each specific teaching competency. The model has been designed for routine application in medical schools and is thought to be complemented consecutively by additional competencies for teachers with special duties and responsibilities in a future step. PMID:26038688

  14. Framework for development of physician competencies in genomic medicine: report of the Competencies Working Group of the Inter-Society Coordinating Committee for Physician Education in Genomics.

    Science.gov (United States)

    Korf, Bruce R; Berry, Anna B; Limson, Melvin; Marian, Ali J; Murray, Michael F; O'Rourke, P Pearl; Passamani, Eugene R; Relling, Mary V; Tooker, John; Tsongalis, Gregory J; Rodriguez, Laura L

    2014-11-01

    Completion of the Human Genome Project, in conjunction with dramatic reductions in the cost of DNA sequencing and advances in translational research, is gradually ushering genomic discoveries and technologies into the practice of medicine. The rapid pace of these advances is opening up a gap between the knowledge available about the clinical relevance of genomic information and the ability of clinicians to include such information in their medical practices. This educational gap threatens to be rate limiting to the clinical adoption of genomics in medicine. Solutions will require not only a better understanding of the clinical implications of genetic discoveries but also training in genomics at all levels of professional development, including for individuals in formal training and others who long ago completed such training. The National Human Genome Research Institute has convened the Inter-Society Coordinating Committee for Physician Education in Genomics (ISCC) to develop and share best practices in the use of genomics in medicine. The ISCC has developed a framework for development of genomics practice competencies that may serve as a starting point for formulation of competencies for physicians in various medical disciplines.

  15. Age- and sex-specific thorax finite element model development and simulation.

    Science.gov (United States)

    Schoell, Samantha L; Weaver, Ashley A; Vavalle, Nicholas A; Stitzel, Joel D

    2015-01-01

    The shape, size, bone density, and cortical thickness of the thoracic skeleton vary significantly with age and sex, which can affect the injury tolerance, especially in at-risk populations such as the elderly. Computational modeling has emerged as a powerful and versatile tool to assess injury risk. However, current computational models only represent certain ages and sexes in the population. The purpose of this study was to morph an existing finite element (FE) model of the thorax to depict thorax morphology for males and females of ages 30 and 70 years old (YO) and to investigate the effect on injury risk. Age- and sex-specific FE models were developed using thin-plate spline interpolation. In order to execute the thin-plate spline interpolation, homologous landmarks on the reference, target, and FE model are required. An image segmentation and registration algorithm was used to collect homologous rib and sternum landmark data from males and females aged 0-100 years. The Generalized Procrustes Analysis was applied to the homologous landmark data to quantify age- and sex-specific isolated shape changes in the thorax. The Global Human Body Models Consortium (GHBMC) 50th percentile male occupant model was morphed to create age- and sex-specific thoracic shape change models (scaled to a 50th percentile male size). To evaluate the thoracic response, 2 loading cases (frontal hub impact and lateral impact) were simulated to assess the importance of geometric and material property changes with age and sex. Due to the geometric and material property changes with age and sex, there were observed differences in the response of the thorax in both the frontal and lateral impacts. Material property changes alone had little to no effect on the maximum thoracic force or the maximum percent compression. With age, the thorax becomes stiffer due to superior rotation of the ribs, which can result in increased bone strain that can increase the risk of fracture. For the 70-YO models

  16. Development of linear pulse motor type control element drive mechanism for smart

    International Nuclear Information System (INIS)

    Je-Yong, Yu; Jong-in, Kim; Ji-ho, Kim; Hyung, Huh; Moon-Hee, Chang

    2001-01-01

    The system-integrated modular advanced reactor (SMART) currently under development at the Korea Atomic Energy Research Institute is being designed with soluble boron free operation and the use of nuclear heating for reactor start-up. These design features require a Control Element Drive Mechanism(CEDM) for SMART to have fine-step movement capability as well as high reliability for fine reactivity control. In this paper, the design characteristics of a new concept CEDM driven by a Linear Pulse Motor (LPM) which meets the design requirements of the integral reactor SMART are introduced. The primary dimensions of the linear pulse motor are determined by electro-magnetic analysis and the results are also presented. In parallel with the electro-magnetic analysis, the conceptual design of the CEDM is visualized and checked for interferences among parts by assembling three dimensional (3D) models on computer. A prototype of the LPM with double air-gaps for the CEDM sub-assemblies to lift 100 kg is designed, analysed, manufactured and tested to confirm the validity of the CEDM design concept. A converter and test facility are manufactured to verify the dynamic performance of the LPM. The mover of the LPM is welded with ferromagnetic material and non-ferromagnetic material to get the magnetic flux path between the inner stator and outer stator. The thrust forces of LPM predicted by the analytic model have shown good agreement with experimental results from the prototype LPM. It is found that the LPM type CEDM has high force density and a simple drive mechanism to reduce volume and satisfy reactor operating circumstances with high pressure and temperature. (authors)

  17. Development of Modeling and Simulation for Magnetic Particle Inspection Using Finite Elements

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jun-Youl [Iowa State Univ., Ames, IA (United States)

    2003-01-01

    Magnetic particle inspection (MPI) is a widely used nondestructive inspection method for aerospace applications essentially limited to experiment-based approaches. The analysis of MPI characteristics that affect sensitivity and reliability contributes not only reductions in inspection design cost and time but also improvement of analysis of experimental data. Magnetic particles are easily attracted toward a high magnetic field gradient. Selection of a magnetic field source, which produces a magnetic field gradient large enough to detect a defect in a test sample or component, is an important factor in magnetic particle inspection. In this work a finite element method (FEM) has been employed for numerical calculation of the MPI simulation technique. The FEM method is known to be suitable for complicated geometries such as defects in samples. This thesis describes the research that is aimed at providing a quantitative scientific basis for magnetic particle inspection. A new FEM solver for MPI simulation has been developed in this research for not only nonlinear reversible permeability materials but also irreversible hysteresis materials that are described by the Jiles-Atherton model. The material is assumed to have isotropic ferromagnetic properties in this research (i.e., the magnetic properties of the material are identical in all directions in a single crystal). In the research, with a direct current field mode, an MPI situation has been simulated to measure the estimated volume of magnetic particles around defect sites before and after removing any external current fields. Currently, this new MPI simulation package is limited to solving problems with the single current source from either a solenoid or an axial directional current rod.

  18. Development of a finite-element eye model to investigate retinal hemorrhages in shaken baby syndrome.

    Science.gov (United States)

    Nadarasa, Jeyendran; Deck, Caroline; Meyer, Frank; Bourdet, Nicolas; Raul, Jean-Sébastien; Willinger, Rémy

    2018-04-01

    Retinal hemorrhages (RH) are among injuries sustained by a large number of shaken baby syndrome victims, but also by a small proportion of road accident victims. In order to have a better understanding of the underlying of RH mechanisms, we aimed to develop a complete human eye and orbit finite element model. Five occipital head impacts, at different heights and on different surfaces, and three shaking experiments were conducted with a 6-week-old dummy (Q0 dummy). This allowed obtaining a precise description of the motion in those two specific situations, which was then used as input for the eye model simulation. Results showed that four parameters (pressure, Von Mises stress and strain, 1st principal stress) are relevant for shaking-fall comparison. Indeed, in the retina, the softest shaking leads to pressure that is 4 times higher than the most severe impact (1.43 vs. 0.34 kPa). For the Von Mises stress, strain and 1st principal stress, this ratio rises to 4.27, 6.53 and 14.74, respectively. Moreover, regions of high stress and strain in the retina and the choroid were identified and compared to what is seen on fundoscopy. The comparison between linear and rotational acceleration in fall and shaking events demonstrated the important role of the rotational acceleration in inducing such injuries. Even though the eye model was not validated, the conclusion of this study is that compared to falls, shaking an infant leads to extreme eye loading as demonstrated by the values taken by the four mentioned mechanical parameters in the retina and the choroid.

  19. 76 FR 16427 - Risk Communication Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-03-23

    ...] Risk Communication Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS... Communication Advisory Committee. General Function of the Committee: To provide advice and recommendations to... discuss developments in FDA's ongoing communications programs. The discussion will focus on the use of...

  20. Antibody Scientific Committee | Office of Cancer Clinical Proteomics Research

    Science.gov (United States)

    The Antibody Scientific Committee provides scientific insight and guidance to the NCI's Antibody Characterization Program. Specifically, the members of this committee evaluate request from the external scientific community for development and characterization of antibodies by the program. The members of the Antibody Scientific Committee include:

  1. Report of the second joint Research Committee for Fusion Reactor and Materials. July 12, 2002, Tokyo, Japan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-05-01

    Joint research committees in purpose of the discussion on DEMO blanket in view point of the both of reactor technology and materials were held by the Research Committee for Fusion Reactor and Fusion Materials. The joint research committee was held in Tokyo on July 12, 2002. In the committee, the present status of development of solid and liquid breeding blanket, the present status of development of reduced activation structure materials, and IFMIF (International Fusion Materials Irradiation Facility) program were discussed based on the discussions of the development programs of the blanket and materials at the first joint research committee. As a result, it was confirmed that high electric efficiency with 41% would be obtained in the solid breeding blanket system, that neutron radiation data of reduced activation ferritic steel was obtained by HFIR collaboration, and that KEP (key element technology phase) of IFMIF would be finished at the end of 2002 and the data base for the next step, i.e. EVEDA (engineering validation/engineering design activity) was obtained. In addition, the present status of ITER CTA, which was a transient phase for the construction, and the outline of ITER Fast Track, which was an accelerated plan for the performance of the power plants, were reported. This report consists of the summary of the discussion and the viewgraphs which were used at the second joint research committee, and these are very useful for the researchers of the fusion area in Japan. (author)

  2. The SMART Theory and Modeling Team: An Integrated Element of Mission Development and Science Analysis

    Science.gov (United States)

    Hesse, Michael; Birn, J.; Denton, Richard E.; Drake, J.; Gombosi, T.; Hoshino, M.; Matthaeus, B.; Sibeck, D.

    2005-01-01

    When targeting physical understanding of space plasmas, our focus is gradually shifting away from discovery-type investigations to missions and studies that address our basic understanding of processes we know to be important. For these studies, theory and models provide physical predictions that need to be verified or falsified by empirical evidence. Within this paradigm, a tight integration between theory, modeling, and space flight mission design and execution is essential. NASA's Magnetospheric MultiScale (MMS) mission is a pathfinder in this new era of space research. The prime objective of MMS is to understand magnetic reconnection, arguably the most fundamental of plasma processes. In particular, MMS targets the microphysical processes, which permit magnetic reconnection to operate in the collisionless plasmas that permeate space and astrophysical systems. More specifically, MMS will provide closure to such elemental questions as how particles become demagnetized in the reconnection diffusion region, which effects determine the reconnection rate, and how reconnection is coupled to environmental conditions such as magnetic shear angles. Solutions to these problems have remained elusive in past and present spacecraft missions primarily due to instrumental limitations - yet they are fundamental to the large-scale dynamics of collisionless plasmas. Owing to the lack of measurements, most of our present knowledge of these processes is based on results from modern theory and modeling studies of the reconnection process. Proper design and execution of a mission targeting magnetic reconnection should include this knowledge and have to ensure that all relevant scales and effects can be resolved by mission measurements. The SMART mission has responded to this need through a tight integration between instrument and theory and modeling teams. Input from theory and modeling is fed into all aspects of science mission design, and theory and modeling activities are tailored

  3. Interpretive Structural Analysis of Interrelationships among the Elements of Characteristic Agriculture Development in Chinese Rural Poverty Alleviation

    Directory of Open Access Journals (Sweden)

    Yi Cai

    2018-03-01

    Full Text Available Eradicating poverty is a strategic priority in the pursuit of Sustainable Development Goals. This study intends to identify and quantify the elements affecting the Characteristic Agriculture Development (CAD project implemented in area of Chinese poverty and reveals the interrelationships between those elements. First-hand data for the structural modeling were collected through semi-structured interviews with a group of selected experts. As a result, this study has identified seventeen representative elements, and the interrelationships between them have been examined based on the Interpretive Structural Modeling (ISM method. Furthermore, these elements were further categorized into four categories depending on their driving power and dependence power by using the cross-impact matrix multiplication applied to classification (MICMAC analysis. The combination result of the elements identification, ISM modeling and MICMAC analysis provide a conceptual framework for designing, implementing, and managing CAD projects conducted in rural China. Finally, we suggest that an appropriate approach should be applied to empower the poor, promote target group participation, optimize the regional agriculture structure, and increase the agro value chain competiveness in CAD project implementation.

  4. 78 FR 69991 - Advisory Committee; Veterinary Medicine Advisory Committee; Termination

    Science.gov (United States)

    2013-11-22

    .... FDA-2013-N-1380] Advisory Committee; Veterinary Medicine Advisory Committee; Termination AGENCY: Food... announcing the termination of the Veterinary Medicine Advisory Committee. This document removes the Veterinary Advisory Committee from the Agency's list of standing advisory committees. DATES: This rule is...

  5. UKAEA fast reactor project research and development programme on fuel element cladding and sub-assembly wrapper materials

    International Nuclear Information System (INIS)

    Harries, D.R.

    1977-01-01

    Research and development work on fuel element component (cladding, subassembly wrappers, etc.) materials for the U.K. sodium cooled fast reactor programme has been conducted at the United Kingdom Atomic Energy Authority (UKAEA) establishments at Dounreay, Harwell, Risley, and Springfields during the past fifteen years or so. This work has formed an integral part of, and has been co-ordinated by, the UKAEA Fast Reactor Project and has involved close liaison with the Nuclear Power Company (NPC) and the Central Electricity Generating Board (CEGB). The research and development were initially related to the Prototype Fast Reactor (PFR) but the scope has now been extended to cover the first Civil Fast Reactor (CFR1), which has recently been re-designated the Civil Demonstration Fast Reactor (CDFR). The paper outlines the present status of the development of sodium cooled fast reactors in the U.K. and proceeds to summarize the principal PFR and CDFR core and fuel element parameters which have determined the planning and direction of the fuel element materials programme. The current position on the fuel element cladding and wrapper research and development programme is reviewed, and the facilities and future irradiation programme to be carried out in PFR are described

  6. The Effects of Musical Elements in Mass Media and Internet on the Social Development of Children and Adolescents

    Science.gov (United States)

    Celasin, Cenk

    2013-01-01

    In this qualitative study, musical elements in mass media and internet mostly intended to children and adolescents, were examined in the context of the dimensions of the social development of them in a general approach, through scientific literature and written, audio, visual and audio-visual documents regarding mass media and internet. Purpose of…

  7. 78 FR 30929 - Drug Safety and Risk Management Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-05-23

    ...] Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Drug Safety and Risk Management Advisory Committee. General Function of the Committee: To provide... (REMS) with elements to assure safe use (ETASU) before its Drug Safety and Risk Management Advisory...

  8. Development of a user element in ABAQUS for modelling of cohesive laws in composite structures

    DEFF Research Database (Denmark)

    Feih, S.

    2006-01-01

    forward, and most existing publications consider theoretical and therefore simpler softening shapes. In this article, bridging laws were implemented intoan interface element in the UEL user subroutine in the finite element code ABAQUS. Comparison with different experimental data points for crack opening...... measurements of the crack growth resistance and the end opening of the notch. The advantage of this method is that these bridging laws represent material laws independent of the specimen geometry. However, theadaption of the experimentally determined shape to a numerically valid model shape is not straight...

  9. Nerva Fuel Element Development Program Summary Report - July 1966 through June 1972 Extrusion Studies

    Energy Technology Data Exchange (ETDEWEB)

    Napier, J. M.

    1973-09-21

    This part of the completion report pertaining to the NERVA graphite fuel element program covers data collected during the extrusion studies. The physical properties of the fuel element reached the following values: coefficient of thermal expansion (CTE) - 7.0 x 10-6/o C (25 - l,OOOo C); modulus of elasticity - 1.5 x lo6 psi; flexural strength - - 8,000 psi; ultimate strain to failure - 5,500 pidin; good thermal stress resistance. Matrices were produced which could be vapor coated with crack-free films of zirconium carbide. The CTE of the matrix was almost equal to the CTE of the zirconium carbide coating.

  10. Control software development for magnetorheological finishing of large aperture optical elements

    International Nuclear Information System (INIS)

    Zheng Nan; Li Haibo; Yuan Zhigang; Zhong Bo

    2011-01-01

    Based on the mechanism of magnetorheological finishing, the dwell time function was solved by Jansson-Van Cit-tert algorithm to accomplish the kernel module design. Then the software modularization programming, modular testing and integration testing were conducted. A verification experiment was carried out on a crystal element with full aperture of 500 mm and the element's surface achieved rapid and efficient convergence after the software controlled magnetorheological finishing. It is proved that the software could control the whole polishing process accurately. (authors)

  11. Recent status of development and irradiation performance for plate type fuel elements with reduced 235U enrichment at NUKEM

    International Nuclear Information System (INIS)

    Hrovat, M.F.; Hassel, H.W.

    1984-01-01

    According to the present state of development full size test fuel elements with the maximum uranium densities of 2,2 g U/cm 3 meat for UAlsub(x), 3,2 g U/cm 3 meat for U 3 O 8 and 4,8 g U/cm 3 meat for U 3 Si 2 can be fabricated at NUKEM in production scale. Special chemical procedures for the uranium recovery were developed ensuring an economic fuel fabrication process. The post irradiation examinations (PIE) of 12 UAlsub(x) (U density 2,2 g U/cm 3 meat) and U 3 O 8 (up to 3,1 g U/cm 3 meat) test plates irradiated in the ORR, Oak Ridge research reactor, were terminated. All 12 test plates show unobjectionable irradiation behavior. Extensive irradiation tests on full size fuel elements were performed. All inserted elements show perfect irradiation behavior. The PIE of the first HFR Petten U 3 O 8 fuel elements are in progress. The full size ORR U 3 Si 2 fuel elements with so far highest uranium density of 4,76 g U/cm 3 meat achieved a burnup of 50 % loss of 235 U up to May 1983. One element was withdrawn from the reactor for PIE, the second will be irradiated to a burnup of 75 % loss of 235 U. The further development is concentrated on Usub(x)Sisub(y) fuel with highest uranium density. U 3 Si miniplates with up to 6,1 g U/cm 3 meat are supplied meeting the required specification, U 3 Si miniplates with 6,7 g U/cm 3 are in fabrication. (author)

  12. Design and development of gas cooled reactors with closed cycle gas turbines. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    Technological advances over the past fifteen years in the design of turbomachinery, recuperators and magnetic bearings provide the potential for a quantum improvement in nuclear power generation economics through the use of the HTGR with a closed cycle gas turbine. Enhanced international co-operation among national gas cooled reactor programmes in these common technology areas could facilitate the development of this nuclear power concept thereby achieving safety, environmental and economic benefits with overall reduced development costs. This TCM and Workshop was convened to provide the opportunity to review and examine the status of design activities and technology development in national HTGR programmes with specific emphasis on the closed cycle gas turbine, and to identify pathways which take advantage of the opportunity for international co-operation in the development of this concept. Refs, figs, tabs.

  13. Design and development of gas cooled reactors with closed cycle gas turbines. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1996-08-01

    Technological advances over the past fifteen years in the design of turbomachinery, recuperators and magnetic bearings provide the potential for a quantum improvement in nuclear power generation economics through the use of the HTGR with a closed cycle gas turbine. Enhanced international co-operation among national gas cooled reactor programmes in these common technology areas could facilitate the development of this nuclear power concept thereby achieving safety, environmental and economic benefits with overall reduced development costs. This TCM and Workshop was convened to provide the opportunity to review and examine the status of design activities and technology development in national HTGR programmes with specific emphasis on the closed cycle gas turbine, and to identify pathways which take advantage of the opportunity for international co-operation in the development of this concept. Refs, figs, tabs

  14. Robotics and Automation Education: Developing the Versatile, Practical Lab.

    Science.gov (United States)

    Stenerson, Jon

    1986-01-01

    Elements of the development of a robotics and automation laboratory are discussed. These include the benefits of upgrading current staff, ways to achieve this staff development, formation of a robotics factory automation committee, topics to be taught with a robot, elements of a laboratory, laboratory funding, and design safety. (CT)

  15. A computer programme for use in the development of multi-element x-ray-fluorescence methods of analysis

    International Nuclear Information System (INIS)

    Wall, G.J.

    1985-01-01

    A computer programme (written in BASIC) is described for the evaluation of spectral-line intensities in X-ray-fluorescence spectrometry. The programme is designed to assist the analyst while he is developing new analytical methods, because it facilitates the selection of the following evaluation parameters: calculation models, spectral-line correction factors, calibration curves, calibration ranges, and point deletions. In addition, the programme enables the analyst to undertake routine calculations of data from multi-element analyses in which variable data-reduction parameters are used for each element

  16. The research and development of inclination angle magnetic fluid detector with a movable sensing element based on permanent magnets

    Energy Technology Data Exchange (ETDEWEB)

    Lagutkina, D.Yu., E-mail: Lagutkina_D@mail.ru; Saikin, M.S., E-mail: saikinms@mail.ru

    2017-06-01

    The article presents an account on some new designs, which have been developed for the magnetic fluid sensor with a movable sensor based on permanent magnets with the support of Ivanovo State Power Engineering University. The research carried out is aimed at elucidating the influence of the detector sensing element on its operating performance. - Highlights: • In order to conduct a careful research of IAMFD designs operating performance the algorithm was applied to look into the SE suspension force dependencies on its spatial position. • According to this algorithm, the value of the sensitive element suspension force is obtained with use of the MF attraction force of the to the permanent magnet.

  17. Development of odd-Z-projectile reactions for transactinide element synthesis

    International Nuclear Information System (INIS)

    Folden III, Charles Marvin

    2004-01-01

    The development of new odd-Z-projectile reactions leading to the production of transactinide elements is described. The cross section of the even-Z-projectile 208Pb(64Ni, n)271Ds reaction was measured at two new energies using the Berkeley Gas-filled Separator at the Lawrence Berkeley National Laboratory 88-Inch Cyclotron. In total, seven decay chains attributable to 271Ds were observed. These data, combined with previous results, establish an excitation function for the production of 271Ds. The maximum cross section was 20 +15 -11 pb at a center-of-target energy of 311.5 MeV in the laboratory frame.The data from the 271Ds experiments were used to estimate the optimum beam energy for the new odd-Z-projectile 208Pb(65Cu, n)272-111 reaction using the Fusion by Diffusion theory proposed by Swiatecki, Siwek-Wilczynska, and Wilczynski. A cross section for this reaction was measured for the first time, at a center-of-target energy of 321.1 MeV in the laboratory frame. The excitation energy f or compound nuclei formed at the target center was 13.2 MeV. One decay chain was observed, resulting in a measured cross section of 1.7 +3.9 -1.4 pb. This decay chain is in good agreement with previously published data on the decay of 272-111.The new odd-Z-projectile 208Pb(55Mn, n)262Bh reaction was studied at three different projectile energies, and 33 decay chains of 262Bh were observed. The existence of a previously reported alpha-decaying isomeric state in this nuclide was confirmed. Production of the ground state was preferred at all three beam energies. The maximum cross section was 540 +180 -150 pb at a projectile center-of-target energy of 264.0 MeV. This cross section is much larger than that previously reported for the even-Z-projectile 209Bi(54Cr, n)262Bh reaction, which may be because the 54Cr projectile energies in the latter reaction were too high for optimum production of the 1n product. At the highest projectile energy of 268.0 MeV in the target center, two decay

  18. Characterizing chronic and acute health risks of residues of veterinary drugs in food: latest methodological developments by the joint FAO/WHO expert committee on food additives.

    Science.gov (United States)

    Boobis, Alan; Cerniglia, Carl; Chicoine, Alan; Fattori, Vittorio; Lipp, Markus; Reuss, Rainer; Verger, Philippe; Tritscher, Angelika

    2017-11-01

    The risk assessment of residues of veterinary drugs in food is a field that continues to evolve. The toxicological end-points to be considered are becoming more nuanced and in light of growing concern about the development of antimicrobial resistance, detailed analysis of the antimicrobial activity of the residues of veterinary drugs in food is increasingly incorporated in the assessment. In recent years, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) has refined its approaches to provide a more comprehensive and fit-for-purpose risk assessment. This publication describes in detail the consideration of acute and chronic effects, the estimation of acute and chronic dietary exposure, current approaches for including microbiological endpoints in the risk assessment, and JECFA's considerations for the potential effects of food processing on residues from veterinary drugs. JECFA now applies these approaches in the development of health-based guidance values (i.e. safe exposure levels) for residues of veterinary drugs. JECFA, thus, comprehensively addresses acute and chronic risks by using corresponding estimates for acute and chronic exposure and suitable correction for the limited bioavailability of bound residues by the Gallo-Torres model. On a case-by-case basis, JECFA also considers degradation products that occur from normal food processing of food containing veterinary drug residues. These approaches will continue to be refined to ensure the most scientifically sound basis for the establishment of health-based guidance values for veterinary drug residues.

  19. A CLAS act? Community-based organizations, health service decentralization and primary care development in Peru. Local Committees for Health Administration.

    Science.gov (United States)

    Iwami, Michiyo; Petchey, Roland

    2002-12-01

    In 1994 Peru embarked on a programme of health service reform, which combined primary care development and community participation through Local Committees for Health Administration (CLAS). They are responsible for carrying out local health needs assessments and identifying unmet health needs through regular household surveys. These enable them to determine local health provision and tailor services to local requirements. CLAS build on grassroots self-help circles that developed during the economic and political crises of the 1980s, and in which women have been prominent. However, they function under a 3 year contract with the Ministry of Health and within a framework of centrally determined guidelines and regulations. These reforms were implemented in the context of neo-liberal economic policies, which stressed financial deregulation and fiscal and monetary restraint, and were aimed at reducing foreign indebtedness and inflation. We evaluate the achievements of the CLAS and analyse the relationship between health and economic policy in Peru, with the aid of two contrasting models of the role of the state - 'agency' and 'stewardship'. We argue that Peru's experience holds valuable lessons for other countries seeking to foster community involvement. These include the need for community capacity building and partnership between community organizations and state (and other civil) agencies.

  20. Consensus, contracts, and committees.

    Science.gov (United States)

    Moreno, J D

    1991-08-01

    Following a brief account of the puzzle that ethics committees present for the Western Philosophical tradition, I will examine the possibility that social contract theory can contribute to a philosophical account of these committees. Passing through classical as well as contemporary theories, particularly Rawls' recent constructivist approach, I will argue that social contract theory places severe constraints on the authority that may legitimately be granted to ethics committees. This, I conclude, speaks more about the suitability of the theory to this level of analysis than about the ethics committee phenomenon itself.

  1. Development of Finite Element Response Model for Mechanistic - Empirical Design of Flexible Pavement

    Directory of Open Access Journals (Sweden)

    Mujtaba A. AHMED

    2012-08-01

    Full Text Available The focus of this work is to present a finite element method (FEM-based program of the M-E design on MATLAB protocol. The response output generated at critical locations are presented. The results were then compared with those from a locally available program called ‘NEMPADS’ and a reasonable comparison were achieved.

  2. Development of a convex polyhedral discrete element simulation framework for NVIDIA Kepler based GPUs

    CSIR Research Space (South Africa)

    Govender, Nicolin

    2013-01-01

    Full Text Available in nature and cannot be described by a closed form solution for more than a few particles. A popular and successful approach in simulating the underlying dynamics of GM is by using the Discrete Element Method (DEM). Computational viable simulations...

  3. Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr

    Science.gov (United States)

    Li, H. F.; Xie, X. H.; Zheng, Y. F.; Cong, Y.; Zhou, F. Y.; Qiu, K. J.; Wang, X.; Chen, S. H.; Huang, L.; Tian, L.; Qin, L.

    2015-01-01

    Biodegradable metals have attracted considerable attentions in recent years. Besides the early launched biodegradable Mg and Fe metals, Zn, an essential element with osteogenic potential of human body, is regarded and studied as a new kind of potential biodegradable metal quite recently. Unfortunately, pure Zn is soft, brittle and has low mechanical strength in the practice, which needs further improvement in order to meet the clinical requirements. On the other hand, the widely used industrial Zn-based alloys usually contain biotoxic elements (for instance, ZA series contain toxic Al elements up to 40 wt.%), which subsequently bring up biosafety concerns. In the present work, novel Zn-1X binary alloys, with the addition of nutrition elements Mg, Ca and Sr were designed (cast, rolled and extruded Zn-1Mg, Zn-1Ca and Zn-1Sr). Their microstructure and mechanical property, degradation and in vitro and in vivo biocompatibility were studied systematically. The results demonstrated that the Zn-1X (Mg, Ca and Sr) alloys have profoundly modified the mechanical properties and biocompatibility of pure Zn. Zn-1X (Mg, Ca and Sr) alloys showed great potential for use in a new generation of biodegradable implants, opening up a new avenue in the area of biodegradable metals. PMID:26023878

  4. Development of a procedure for the sequential extraction of substances binding trace elements in plant biomass

    Czech Academy of Sciences Publication Activity Database

    Pavlíková, D.; Pavlík, Milan; Vašíčková, Soňa; Száková, J.; Vokáč, Karel; Balík, J.; Tlustoš, P.

    2005-01-01

    Roč. 381, - (2005), s. 863-872 ISSN 1618-2642 Institutional research plan: CEZ:AV0Z4055905 Keywords : organic compounds binding trace elements * spinach plant * sequential extraction Subject RIV: EI - Biotechnology ; Bionics Impact factor: 2.695, year: 2005

  5. Developments of the indirect method for measuring the high frequency dynamic stiffness of resilient elements

    NARCIS (Netherlands)

    Thompson, D.J.; Vliet, van W.J.; Verheij, J.W.

    1998-01-01

    The complex stiffness of resilient elements is an important parameter required in order to model vibration isolation for many applications. Measurement methods are being standardized which allow such a stiffness to be measured as a function of excitation frequency for known loading conditions. This

  6. Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr.

    Science.gov (United States)

    Li, H F; Xie, X H; Zheng, Y F; Cong, Y; Zhou, F Y; Qiu, K J; Wang, X; Chen, S H; Huang, L; Tian, L; Qin, L

    2015-05-29

    Biodegradable metals have attracted considerable attentions in recent years. Besides the early launched biodegradable Mg and Fe metals, Zn, an essential element with osteogenic potential of human body, is regarded and studied as a new kind of potential biodegradable metal quite recently. Unfortunately, pure Zn is soft, brittle and has low mechanical strength in the practice, which needs further improvement in order to meet the clinical requirements. On the other hand, the widely used industrial Zn-based alloys usually contain biotoxic elements (for instance, ZA series contain toxic Al elements up to 40 wt.%), which subsequently bring up biosafety concerns. In the present work, novel Zn-1X binary alloys, with the addition of nutrition elements Mg, Ca and Sr were designed (cast, rolled and extruded Zn-1Mg, Zn-1Ca and Zn-1Sr). Their microstructure and mechanical property, degradation and in vitro and in vivo biocompatibility were studied systematically. The results demonstrated that the Zn-1X (Mg, Ca and Sr) alloys have profoundly modified the mechanical properties and biocompatibility of pure Zn. Zn-1X (Mg, Ca and Sr) alloys showed great potential for use in a new generation of biodegradable implants, opening up a new avenue in the area of biodegradable metals.

  7. Homology of the Fifth Epibranchial and Accessory Elements of the Ceratobranchials among Gnathostomes: Insights from the Development of Ostariophysans

    Science.gov (United States)

    Carvalho, Murilo; Bockmann, Flávio Alicino; de Carvalho, Marcelo Rodrigues

    2013-01-01

    Epibranchials are among the main dorsal elements of the gill basket in jawed vertebrates (Gnathostomata). Among extant fishes, chondrichthyans most resemble the putative ancestral condition as all branchial arches possess every serially homologous piece. In osteichthyans, a primitive rod-like epibranchial 5, articulated to ceratobranchial 5, is absent. Instead, epibranchial 5 of many actinopterygians is here identified as an accessory element attached to ceratobranchial 4. Differences in shape and attachment of epibranchial 5 in chondrichthyans and actinopterygians raised suspicions about their homology, prompting us to conduct a detailed study of the morphology and development of the branchial basket of three ostariophysans (Prochilodus argenteus, Characiformes; Lophiosilurus alexandri and Pseudoplatystoma corruscans, Siluriformes). Results were interpreted within a phylogenetic context of major gnathostome lineages. Developmental series strongly suggest that the so-called epibranchial 5 of actinopterygians does not belong to the epal series because it shares the same chondroblastic layer with ceratobranchial 4 and its ontogenetic emergence is considerably late. This neomorphic structure is called accessory element of ceratobranchial 4. Its distribution among gnathostomes indicates it is a teleost synapomorphy, occurring homoplastically in Polypteriformes, whereas the loss of the true epibranchial 5 is an osteichthyan synapomorphy. The origin of the accessory element of ceratobranchial 4 appears to have occurred twice in osteichthyans, but it may have a single origin; in this case, the accessory element of ceratobranchial 4 would represent a remnant of a series of elements distally attached to ceratobranchials 1–4, a condition totally or partially retained in basal actinopterygians. Situations wherein a structure is lost while a similar neomorphic element is present may lead to erroneous homology assessments; these can be avoided by detailed morphological and

  8. Space Station: NASA's software development approach increases safety and cost risks. Report to the Chairman, Committee on Science, Space, and Technology, House of Representatives

    Science.gov (United States)

    1992-06-01

    The House Committee on Science, Space, and Technology asked NASA to study software development issues for the space station. How well NASA has implemented key software engineering practices for the station was asked. Specifically, the objectives were to determine: (1) if independent verification and validation techniques are being used to ensure that critical software meets specified requirements and functions; (2) if NASA has incorporated software risk management techniques into program; (3) whether standards are in place that will prescribe a disciplined, uniform approach to software development; and (4) if software support tools will help, as intended, to maximize efficiency in developing and maintaining the software. To meet the objectives, NASA proceeded: (1) reviewing and analyzing software development objectives and strategies contained in NASA conference publications; (2) reviewing and analyzing NASA, other government, and industry guidelines for establishing good software development practices; (3) reviewing and analyzing technical proposals and contracts; (4) reviewing and analyzing software management plans, risk management plans, and program requirements; (4) reviewing and analyzing reports prepared by NASA and contractor officials that identified key issues and challenges facing the program; (5) obtaining expert opinions on what constitutes appropriate independent V-and-V and software risk management activities; (6) interviewing program officials at NASA headquarters in Washington, DC; at the Space Station Program Office in Reston, Virginia; and at the three work package centers; Johnson in Houston, Texas; Marshall in Huntsville, Alabama; and Lewis in Cleveland, Ohio; and (7) interviewing contractor officials doing work for NASA at Johnson and Marshall. The audit work was performed in accordance with generally accepted government auditing standards, between April 1991 and May 1992.

  9. 12 CFR 620.30 - Audit committees.

    Science.gov (United States)

    2010-01-01

    ... shareholders; review the impact of any significant accounting and auditing developments; review accounting policy changes relating to preparation of financial statements; and review annual and quarterly reports..., financial reporting and disclosure, or accounting procedures. (b) Independence. Every audit committee member...

  10. 78 FR 11727 - National Freight Advisory Committee

    Science.gov (United States)

    2013-02-19

    ... performance in freight transportation; (6) development of freight transportation investment, data, and...; (3) availability and willingness to serve; and (4) relevant experience in working in committees and... minorities, women, and persons with disabilities. Please note, however, that federally registered lobbyists...

  11. Vision Hampton Roads : strategy committee minutes & attendance.

    Science.gov (United States)

    2010-02-22

    February 20, 2009 : HRP Executive Committee Meeting, Looking Back, Looking Forward : March 20, 2009 : HRP Board Meeting, Accolades & Action, Doing Things Jointly with Comprehensive : Economic Development Strategies : April 17,...

  12. Development of a three-dimensional neutron transport code DFEM based on the double finite element method

    International Nuclear Information System (INIS)

    Fujimura, Toichiro

    1996-01-01

    A three-dimensional neutron transport code DFEM has been developed by the double finite element method to analyze reactor cores with complex geometry as large fast reactors. Solution algorithm is based on the double finite element method in which the space and angle finite elements are employed. A reactor core system can be divided into some triangular and/or quadrangular prism elements, and the spatial distribution of neutron flux in each element is approximated with linear basis functions. As for the angular variables, various basis functions are applied, and their characteristics were clarified by comparison. In order to enhance the accuracy, a general method is derived to remedy the truncation errors at reflective boundaries, which are inherent in the conventional FEM. An adaptive acceleration method and the source extrapolation method were applied to accelerate the convergence of the iterations. The code structure is outlined and explanations are given on how to prepare input data. A sample input list is shown for reference. The eigenvalue and flux distribution for real scale fast reactors and the NEA benchmark problems were presented and discussed in comparison with the results of other transport codes. (author)

  13. 77 FR 27832 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-05-11

    ... organizations --Relations with non-governmental organizations --World Maritime Day --International Maritime... DEPARTMENT OF STATE [Public Notice: 7879] Shipping Coordinating Committee; Notice of Committee...-second Session of the International Maritime Organization (IMO) Technical Co-operation Committee (TCC 62...

  14. Connecting Inner-City Youth to the World of Work. A Program Statement by the Committee for Economic Development.

    Science.gov (United States)

    Committee for Economic Development, Washington, DC.

    The United States should provide all young people entering the work force with opportunities to develop productive careers. Despite that fact, the nation's schools fail to equip many young people with appropriate skills, the job market often fails to link them to long-term advancement-oriented employment, and their communities often provide few…

  15. The TREAT-NMD advisory committee for therapeutics (TACT): an innovative de-risking model to foster orphan drug development

    NARCIS (Netherlands)

    Heslop, Emma; Csimma, Cristina; Straub, Volker; McCall, John; Nagaraju, Kanneboyina; Wagner, Kathryn R.; Caizergues, Didier; Korinthenberg, Rudolf; Flanigan, Kevin M.; Kaufmann, Petra; McNeil, Elizabeth; Mendell, Jerry; Hesterlee, Sharon; Wells, Dominic J.; Bushby, Kate; McNeil, Dawn Elizabeth; Allen, Hugh; Bourke, John; Burghes, Arthur; Buyse, Gunnar; Catlin, Nick; Clemens, Paula; Cnaan, Avital; Comi, Giacomo; Connor, Edward; de Luca, Annamaria; de Montleau, Béatrice; de Visser, Marianne; Day, Simon; Dittrich, Sven; Dubrosky, Alberto; Eagle, Michelle; Finkel, Richard; Fishbeck, Kenneth; Furlong, Patricia; Grounds, Miranda; Hauschke, Dieter; Hoffman, Eric; Irwin, Joseph; Jarecki, Jill; Kelly, Michael; Laforêt, Pascal; Lovering, Richard; Larkindale, Jane; Mayer, Henry; McDonald, Robert; McNally, Elizabeth; Miller, Debra; North, Kathryn; Ouillade, Marie-Christine

    2015-01-01

    Despite multiple publications on potential therapies for neuromuscular diseases (NMD) in cell and animal models only a handful reach clinical trials. The ability to prioritise drug development according to objective criteria is particularly critical in rare diseases with large unmet needs and a

  16. Argentine activities related to the development of low enriched fuel elements

    International Nuclear Information System (INIS)

    Giorsetti, Domingo R.; Perez, Edmundo E.

    1983-01-01

    Within the framework of the RERTR Program and supported by the technical cooperation work agreed upon between the U.S.A. and Argentina in May 1979, the CNEA Nuclear Fuel Department - Low Enriched Fuel Elements Project (ECBE Project), has carried on its own program for developing fuels with low enrichment for research and test reactors. Up to the present, its main objective has been to replace the highly enriched fuel used in its only reactor (RA-3) for research, development and radioisotopes production. The basic stages of the Argentine Program are shown in Table 1. At a meeting held in Vienna in March, 1980, the CNEA stated that its development of fuels with low enrichment would be in two fuel lines: UAl x -Al and U 3 O 8 -Al, and that its aim would be to reach uranium densities of 18-2.2 g/cm 3 for the UAI x -Al line and 2.4-3.0 g/cm 3 for the U 3 O 8 line. At the international meeting held at ANL in November, 1980, and after having received depleted uranium and uranium with 20% and 45% enrichment (purchased from the U.S.A. for manufacturing miniplates and possible standard fuels) to carry on the proposed development, CNEA anticipated -- after its first tests -- that the conditions were satisfactory for reaching uranium densities of 2.4-3.0 g/cm 3 in U 3 O 8 -Al fuel and of 2.4 g/cm 3 in UAI x -Al fuel. In February 1981, after Argentina accepted the obligation of paying for the irradiation service, authorization was obtained for irradiating miniplates in the Oak Ridge Reactor within the RERTR Program. In June 1981, the first set of miniplates was sent to Oak Ridge National Laboratory (ORNL). The maximum actual densities reached at that time were 3.12 g/cm 3 with U 3 O 8 -Al and 2.52 g/cm 3 with UAl x -Al. During a visit of the CNEA Project Technical Manager to the Argonne National Laboratory (ANL) in July 1981, and after exchanging ideas with ANL professional staff, the CNEA decided to incorporate a new line of development, that of U 3 Si-Al. Three months later

  17. Developing ISM Dust Grain Models with Precision Elemental Abundances from IXO

    Science.gov (United States)

    Valencic, L. A.; Smith, R. K.; Juet, A.

    2009-01-01

    The exact nature of interstellar dust grains in the Galaxy remains mysterious, despite their ubiquity. Many viable models exist, based on available IR-UV data and assumed elemental abundances. However, the abundances, which are perhaps the most stringent constraint, are not well known: modelers must use proxies in the absence of direct measurements for the diffuse interstellar medium (ISM). Recent revisions of these proxy values have only added to confusion over which is the best representative for the diffuse ISM, and highlighted the need for direct, high signal-to-noise measurements from the ISM itself. The International X-ray Observatory's superior facilities will enable high-precision elemental abundance measurements. We ill show how these results will measure both the overall ISM abundances and challenge dust models, allowing us to construct a more realistic picture of the ISM.

  18. Development of a versatile XRF scanner for the elemental imaging of paintworks

    International Nuclear Information System (INIS)

    Ravaud, E.; Pichon, L.; Laval, E.; Eveno, M.; Gonzalez, V.; Calligaro, T.

    2016-01-01

    Scanning XRF is a powerful elemental imaging technique introduced at the synchrotron that has recently been transposed to laboratory. The growing interest in this technique stems from its ability to collect images reflecting pigment distribution within large areas on artworks by means of their elemental signature. In that sense, scanning XRF appears highly complementary to standard imaging techniques (Visible, UV, IR photography and X-ray radiography). The versatile XRF scanner presented here has been designed and built at the C2RMF in response to specific constraints: transportability, cost-effectiveness and ability to scan large areas within a single working day. The instrument is based on a standard X-ray generator with sub-millimetre collimated beam and a SDD-based spectrometer to collected X-ray spectra. The instrument head is scanned in front of the painting by means of motorised movements to cover an area up to 300 x 300 mm 2 with a resolution of 0.5 mm (600 x 600 pixels). The 15-kg head is mounted on a stable photo stand for rapid positioning on paintworks and maintains a free side-access for safety; it can also be attached to a lighter tripod for field measurements. Alignment is achieved with a laser pointer and a micro-camera. With a scanning speed of 5 mm/s and 0.1 s/point, elemental maps are collected in 10 h, i.e. a working day. The X-ray spectra of all pixels are rapidly processed using an open source program to derive elemental maps. To illustrate the capabilities of this instrument, this contribution presents the results obtained on the Belle Ferronniere painted by Leonardo da Vinci (1452-1519) and conserved in the Musee du Louvre, prior to its restoration at the C2RMF. (orig.)

  19. The development of a volume element model for energy systems engineering and integrative thermodynamic optimization

    Science.gov (United States)

    Yang, Sam

    The dissertation presents the mathematical formulation, experimental validation, and application of a volume element model (VEM) devised for modeling, simulation, and optimization of energy systems in their early design stages. The proposed model combines existing modeling techniques and experimental adjustment to formulate a reduced-order model, while retaining sufficient accuracy to serve as a practical system-level design analysis and optimization tool. In the VEM, the physical domain under consideration is discretized in space using lumped hexahedral elements (i.e., volume elements), and the governing equations for the variable of interest are applied to each element to quantify diverse types of flows that cross it. Subsequently, a system of algebraic and ordinary differential equations is solved with respect to time and scalar (e.g., temperature, relative humidity, etc.) fields are obtained in both spatial and temporal domains. The VEM is capable of capturing and predicting dynamic physical behaviors in the entire system domain (i.e., at system level), including mutual interactions among system constituents, as well as with their respective surroundings and cooling systems, if any. The VEM is also generalizable; that is, the model can be easily adapted to simulate and optimize diverse systems of different scales and complexity and attain numerical convergence with sufficient accuracy. Both the capability and generalizability of the VEM are demonstrated in the dissertation via thermal modeling and simulation of an Off-Grid Zero Emissions Building, an all-electric ship, and a vapor compression refrigeration (VCR) system. Furthermore, the potential of the VEM as an optimization tool is presented through the integrative thermodynamic optimization of a VCR system, whose results are used to evaluate the trade-offs between various objective functions, namely, coefficient of performance, second law efficiency, pull-down time, and refrigerated space temperature, in

  20. Development of a versatile XRF scanner for the elemental imaging of paintworks

    Energy Technology Data Exchange (ETDEWEB)

    Ravaud, E.; Pichon, L.; Laval, E.; Eveno, M. [Centre de recherche et de restauration des musees de France, C2RMF, Paris (France); Gonzalez, V.; Calligaro, T. [Centre de recherche et de restauration des musees de France, C2RMF, Paris (France); PSL Research University, Chimie ParisTech-CNRS, Institut de Recherche Chimie Paris, UMR8247, Paris (France)

    2016-01-15

    Scanning XRF is a powerful elemental imaging technique introduced at the synchrotron that has recently been transposed to laboratory. The growing interest in this technique stems from its ability to collect images reflecting pigment distribution within large areas on artworks by means of their elemental signature. In that sense, scanning XRF appears highly complementary to standard imaging techniques (Visible, UV, IR photography and X-ray radiography). The versatile XRF scanner presented here has been designed and built at the C2RMF in response to specific constraints: transportability, cost-effectiveness and ability to scan large areas within a single working day. The instrument is based on a standard X-ray generator with sub-millimetre collimated beam and a SDD-based spectrometer to collected X-ray spectra. The instrument head is scanned in front of the painting by means of motorised movements to cover an area up to 300 x 300 mm{sup 2} with a resolution of 0.5 mm (600 x 600 pixels). The 15-kg head is mounted on a stable photo stand for rapid positioning on paintworks and maintains a free side-access for safety; it can also be attached to a lighter tripod for field measurements. Alignment is achieved with a laser pointer and a micro-camera. With a scanning speed of 5 mm/s and 0.1 s/point, elemental maps are collected in 10 h, i.e. a working day. The X-ray spectra of all pixels are rapidly processed using an open source program to derive elemental maps. To illustrate the capabilities of this instrument, this contribution presents the results obtained on the Belle Ferronniere painted by Leonardo da Vinci (1452-1519) and conserved in the Musee du Louvre, prior to its restoration at the C2RMF. (orig.)

  1. Development of realtime monitoring technology for laser photoreaction product - Development of glow discharge-mass spectrometry (GD-MS) hybrid techniques for trace analysis of refractory elements

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Chun [Kyungnam University, Masan (Korea); Kim, Ha Suck [Seoul National University, Seoul (Korea); Kim, Hyo Jin [Dongduk Women' s University, Seoul (Korea)

    2000-04-01

    This research is focusing on development of hybrid techniques of glow discharge-mass spectrometry for the trace analysis of refractory elements. At first, we developed a glow discharge(GD) ionization cell and its characteristics was investigated. The new GD cell was designed based on direct current hollow cathode glow discharge and it is used for quadrupole mass analyzer and time-of-flight mass analyzer. Currently, GD-quadrupole mass spectrometry is working for the analysis of refractory elements. The experimental results show relatively good for trace analysis. In addition, ion mobile spectrometry using plasma and liquid discharge technique were investigated for the analysis of refractory elements and both techniques need more investigation to deduce the their usefulness. 30 refs., 67 figs., 4 tabs. (Author)

  2. Recent developments in uranium resources and supply. Proceedings of a technical committee meeting held in Vienna, 24-28 May 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In recent years substantial uncertainties regarding uranium supply have made it very difficult for both uranium producers and users to plan for the future. In 1992 uranium production met only about 63 percent of reactor requirements. This resulted in a very unstable supply/demand balance where inventory drawdown (supplemented by minor amounts of reprocessing) filled the 20,960 tonne shortfall. The IAEA convened this Technical Committee meeting to take advantage of the new opportunities to collect and analyse information related to the future supply and demand balance and to help reduce uncertainties regarding the relationship. The meeting was effective in bringing together experts from all regions to share, exchange and disseminate information regarding uranium related activities. This meeting on Recent Developments in Uranium Resources and Supply was held in Vienna from 24 to 26 May 1993. It was attended by 47 participants from 23 countries. Twenty-one papers were presented. Contributions from China, the Czech Republic, India, Kazakhstan, Mongolia, Romania and the Russian Federation represent new information in this field. Refs, figs and tabs.

  3. Role of dietary factors and food habits in the development of childhood obesity: a commentary by the ESPGHAN Committee on Nutrition.

    Science.gov (United States)

    Agostoni, Carlo; Braegger, Christian; Decsi, Tamas; Kolacek, Sanja; Koletzko, Berthold; Mihatsch, Walter; Moreno, Luis A; Puntis, John; Shamir, Raanan; Szajewska, Hania; Turck, Dominique; van Goudoever, Johannes

    2011-06-01

    This Comment by the Committee on Nutrition of the European Society for Paediatric Gastroenterology, Hepatology, and Nutrition aims to provide a summary of the role of nutrition-related factors on obesity prevention in children ages 2 to 18 years. This Comment emphasizes that dietary interventions should be incorporated into a multidisciplinary strategy for obesity prevention. No single nutrient has been unequivocally associated with the development of obesity. Methodological limitations in study design and the complex nature of obesity must be taken into account when interpreting the association with reported dietary factors. Energy intake should be individually determined, taking into account energy expenditure and growth. Preferential intake of slowly absorbed carbohydrates and limiting the ingestion of rapidly absorbed carbohydrates and simple sugars should be promoted. No specific recommendations for macronutrient intakes to prevent obesity can be made. Plant foods can be used as the main food contributors to a well-balanced diet with adequate monitoring of nutrient intake. Plain water should be promoted as the main source of fluids for children instead of sugar-sweetened beverages. Children should eat at least 4 meals, including breakfast, every day. Regular family meals should be encouraged. Regular consumption of fast food with large portion sizes and high energy density should be avoided. Healthy food options should be promoted for snacking. Food portion sizes should be appropriate for age and body size. Nutrition and lifestyle education aimed at the prevention of obesity should be included in the routine care of children by health care professionals.

  4. MP Salsa: a finite element computer program for reacting flow problems. Part 1--theoretical development

    Energy Technology Data Exchange (ETDEWEB)

    Shadid, J.N.; Moffat, H.K.; Hutchinson, S.A.; Hennigan, G.L.; Devine, K.D.; Salinger, A.G.

    1996-05-01

    The theoretical background for the finite element computer program, MPSalsa, is presented in detail. MPSalsa is designed to solve laminar, low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow, heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solver coupled multiple Poisson or advection-diffusion- reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMKIN, respectively. The code employs unstructured meshes, using the EXODUS II finite element data base suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec solver library.

  5. Development and applications of two finite element groundwater flow and contaminant transport models: FEWA and FEMA

    International Nuclear Information System (INIS)

    Yeh, G.T.; Wong, K.V.; Craig, P.M.; Davis, E.C.

    1985-01-01

    This paper presents the construction, verification, and application of two groundwater flow and contaminant transport models: A Finite Element Model of Water Flow through Aquifers (FEWA) and A Finite Element Model of Material Transport through Aquifers (FEMA). The construction is based on the finite element approximation of partial differential equations of groundwater flow (FEWA) and of solute movement (FEMA). The particular features of FEWA and FEMA are their versatility and flexibility for dealing with nearly all vertically integrated two-dimensional problems. The models were verified against both analytical solutions and widely used US Geological Survey finite difference approximations. They were then applied for calibration and validation, using data obtained in experiments at the Engineering Test Facility at Oak Ridge National Laboratory. Results indicated that the models are valid for this specific site. To demonstrate the versatility anf flexibility of the models, they were applied to two hypothetical, but realistic, complex problems and three field sites across the United States. In these applications the models yielded good agreement with the field data for all three sites. Finally, the predictive capabilities of the models were demonstrated using data obtained at the Hialeah Preston site in Florida. This case illustrates the capability of FEWA and FEMA as predictive tools and their usefulness in the management of groundwater flow and contaminant transport. 25 refs

  6. Development of synthetic selfish elements based on modular nucleases in Drosophila melanogaster.

    Science.gov (United States)

    Simoni, Alekos; Siniscalchi, Carla; Chan, Yuk-Sang; Huen, David S; Russell, Steven; Windbichler, Nikolai; Crisanti, Andrea

    2014-06-01

    Selfish genes are DNA elements that increase their rate of genetic transmission at the expense of other genes in the genome and can therefore quickly spread within a population. It has been suggested that selfish elements could be exploited to modify the genome of entire populations for medical and ecological applications. Here we report that transcription activator-like effector nuclease (TALEN) and zinc finger nuclease (ZFN) can be engineered into site-specific synthetic selfish elements (SSEs) and demonstrate their transmission of up to 70% in the Drosophila germline. We show here that SSEs can spread via DNA break-induced homologous recombination, a process known as 'homing' similar to that observed for homing endonuclease genes (HEGs), despite their fundamentally different modes of DNA binding and cleavage. We observed that TALEN and ZFN have a reduced capability of secondary homing compared to HEG as their repetitive structure had a negative effect on their genetic stability. The modular architecture of ZFNs and TALENs allows for the rapid design of novel SSEs against specific genomic sequences making them potentially suitable for the genetic engineering of wild-type populations of animals and plants, in applications such as gene replacement or population suppression of pest species. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

  7. Development of an intravascular ultrasound elastography based on a dual-element transducer

    Science.gov (United States)

    Shih, Cho-Chiang; Chen, Pei-Yu; Ma, Teng; Zhou, Qifa; Shung, K. Kirk; Huang, Chih-Chung

    2018-04-01

    The ability to measure the elastic properties of plaques and vessels would be useful in clinical diagnoses, particularly for detecting a vulnerable plaque. This study demonstrates the feasibility of the combination of intravascular ultrasound (IVUS) and acoustic radiation force elasticity imaging for detecting the distribution of stiffness within atherosclerotic arteries ex vivo. A dual-frequency IVUS transducer with two elements was used to induce the propagation of the shear wave (by the 8.5 MHz pushing element) which could be simultaneously monitored by the 31 MHz imaging element. The wave-amplitude image and the wave-velocity image were reconstructed by measuring the peak displacement and wave velocity of shear wave propagation, respectively. System performance was verified using gelatin phantoms. The phantom results demonstrate that the stiffness differences of shear modulus of 1.6 kPa can be distinguished through the wave-amplitude and wave-velocity images. The stiffness distributions of the atherosclerotic aorta from a rabbit were obtained, for which the values of peak displacement and the shear wave velocity were 3.7 ± 1.2 µm and 0.38 ± 0.19 m s-1 for the lipid-rich plaques, and 1.0 ± 0.2 µm and 3.45 ± 0.45 m s-1 for the arterial walls, respectively. These results indicate that IVUS elasticity imaging can be used to distinguish the elastic properties of plaques and vessels.

  8. Design and development of self-passivating biodegradable magnesium alloys using selective element oxidation

    Science.gov (United States)

    Brar, Harpreet Singh

    Metallic biomaterials such as stainless steels, titanium alloys, and cobalt-chromium alloys have been used as structural implant materials for many years. However, due to their limitations in temporary implant applications, there has been increased interest in the development of a biodegradable structural implant device. Magnesium (Mg) alloys have shown great potential as a material for biodegradable structural implant applications. However, low strength and high degradation rate of Mg under physiological conditions are major limitations, causing the implant to lose its structural integrity before the healing process is complete. The main aim of this work was to investigate the possibility of designing Mg-based alloys with ability to form selective protective oxides, thereby aiding in the reduction of the initial degradation rate. A thermodynamics-driven design was utilized to select three elements, namely Gadolinium (Gd), Scandium (Sc) and Yttrium (Y), due to the low enthalpy of formation associated with their oxide species. First, binary alloys were cast under inert atmosphere, solution treated and investigated for degradation rate in Hanks' solution. The Mg-Gd binary alloy showed the fastest degradation rate whereas the Mg-Sc binary alloy showed the slowest degradation rate. The degradation of Mg-Gd and Mg-Y was 18 and 5 times faster than Mg-Sc alloy, respectively. The microstructural analysis of the alloys was performed using X-ray Diffraction (XRD), Optical Microscopy (OM) and Scanning Electron Microscopy (SEM). It was observed that the grain size of Mg-Sc alloys is significantly smaller than Mg-Gd and Mg-Y alloys and can be a contributing factor to the reduction in degradation rate. The hardness behavior of the alloys was also investigated using Vickers microhardness Testing. To understand the oxidation behavior and kinetics, samples were oxidized in pure oxygen environment and investigated using microstructural and thermogravimetric analysis (TGA). Auger

  9. Committee on Science

    Science.gov (United States)

    SCIENCE ADVISOR WASHINGTON, DC -- Today, House Science Committee Chairman Sherwood Boehlert (R-NY23) and Advisor nominee Dr. John H. Marburger. The Senate Commerce Committee has scheduled a nomination hearing for this afternoon, and Boehlert and Grucci have been invited to testify. Dr. Marburger was nominated

  10. LOCAL ORGANIZING COMMITTEE

    Indian Academy of Sciences (India)

    Prof. B. B. P. Gupta

    INDIAN ACADEMY OF SCIENCES. Bengaluru. 83rd ANNUAL MEETING. 3–5 November 2017, NEHU, Shillong. LOCAL ORGANIZING COMMITTEE. Local Organizing Committee. 1. Prof. S. K. Srivastava. Chairman. Vice-Chancellor, NEHU, Shillong. 2. Prof. B. B. P. Gupta. Organising Secretary. Department of Zoology ...

  11. How gender impacts career development and leadership in rehabilitation medicine: a report from the AAPM&R research committee.

    Science.gov (United States)

    Wagner, Amy K; McElligott, Jacinta; Chan, Leighton; Wagner, Eugene P; Segal, Neil A; Gerber, Lynn H

    2007-05-01

    To examine the role that gender plays in meeting the medical academic mission by assessing career development, leadership, and research productivity among rehabilitation researchers. Prospective, cross-sectional cohort study. National survey. Three hundred sixty rehabilitation professionals linked to the American Academy of Physical Medicine and Rehabilitation, Association of Academic Physiatrists, and/or the American Congress of Rehabilitation Medicine. Online or paper survey. Research skills, resources and productivity, salary, leadership, and academic advancement. Results suggested that women rated themselves as being less skilled and having fewer resources for research compared with their male counterparts. Additionally, significantly fewer women applied for grant funding and had a lower publication rate compared with men. A proportionally larger number of women remained at lower academic ranks than men, and fewer women achieved senior academic ranks or positions of leadership. Even after adjusting for potential confounding factors, female sex remained a significant variable associated with lower salaries and lower manuscript production. Unlike men, female respondents tended to believe that being a woman was a negative factor with respect to academic advancement, leadership opportunities, salary, and resources. Female rehabilitation researchers were less developed professionally than their male counterparts and saw themselves as disadvantaged. These findings have potential implications for attracting women into rehabilitation research and the rehabilitation research community's efforts to sustain its academic mission, to improve research capacity, and to meet the needs of the 52 million people in the United States with disabilities.

  12. Report of the task group on dose calculations to ICRP Committee 2, March 17-21, 1980

    International Nuclear Information System (INIS)

    Ford, M.R.

    1980-03-01

    Publication is reported on annual limit on intake and derived air concentration for the 21 elements (187 radionuclides) reported at the last committee meeting. Computations of dosimetric data are completed for 31 elements (each including an average of 8 to 9 radioisotopes) having a half-life of 10 minutes or more. Computer drawn decay chains are furnished for each parent radionuclide. Problems arose with elements that concentrate in the gastrointestinal walls, the brain, the bone marrow and those that produce gases or vapors. A revised computer format was developed

  13. Pesticide Program Dialogue Committee (PPDC)

    Science.gov (United States)

    The Pesticide Program Dialogue Committee, a permanent, broadly representative advisory committee, meets with EPA on a regular basis to discuss pesticide regulatory, policy, and program implementation issues.

  14. Developing a new library of materials and structural elements for the simulative evaluation of buildings' energy performance

    Energy Technology Data Exchange (ETDEWEB)

    Papadopoulos, Agis M.; Oxizidis, Simos; Papathanasiou, Luciano [Laboratory of Heat Transfer and Environmental Engineering, Department of Mechanical Engineering, Aristotle University Thessaloniki, P.O. Box 483, Thessaloniki 54124 (Greece)

    2008-05-15

    Contemporary building energy simulation programs are not only used by researchers but also are common tools in the hands of engineers and architects. Most of them are using databases of materials and structural elements, with characteristics originating from the country or the broader region where the specific program was developed. Thus, often the particularities met in other countries are not considered. Such a database of materials and constructions systematically used in the Greek building sector was developed for use with the simulation program EnergyPlus, which has become quite popular over the last years. In order to determine the applicability of the database, the energy behaviour of a typical multistory, multifamily building was simulated, having the exact materials and structural elements and patterns used in Greece. Furthermore, different thicknesses of insulation were simulated, corresponding to local climatic conditions and, even more important, to different dates of the building's construction. The results are presented and discussed in this paper. (author)

  15. Development and Validation of a New Blade Element Momentum Skewed-Wake Model within AeroDyn: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ning, S. A.; Hayman, G.; Damiani, R.; Jonkman, J.

    2014-12-01

    Blade element momentum methods, though conceptually simple, are highly useful for analyzing wind turbines aerodynamics and are widely used in many design and analysis applications. A new version of AeroDyn is being developed to take advantage of new robust solution methodologies, conform to a new modularization framework for National Renewable Energy Laboratory's FAST, utilize advanced skewed-wake analysis methods, fix limitations with previous implementations, and to enable modeling of highly flexible and nonstraight blades. This paper reviews blade element momentum theory and several of the options available for analyzing skewed inflow. AeroDyn implementation details are described for the benefit of users and developers. These new options are compared to solutions from the previous version of AeroDyn and to experimental data. Finally, recommendations are given on how one might select from the various available solution approaches.

  16. Feasibility study of power reactor fuel elements factory development: I. Economical aspects

    International Nuclear Information System (INIS)

    Marwoto; Ratih-Langenati, R.R.; Susanti, P.

    1996-01-01

    For determining the feasibility study on manufacturing nuclear fuel element from economical aspect point of view, it necessary to fix its capacity which it was found from fuel element reloading requirement for nuclear power plat (PLTN). NEWJEC report which use as a base in this study that is possibly of a complex of NPP as big as 7200 MW in Muria region. If the capacity factor is 80 %, the reload requirement is therefore become from 120 to 142 tons uranium every year. So, its considered to fix the nominal capacity of a fabric for nuclear fuel element manufacturing as much as 200 tons-U per year with economical lifetimes of 20 years. NEWJEC data show, for manufacturing capacity of 200 tons-U per year with, plant have a fixed capital investment of US$ 43.9 million. With working capital as much as 15 % correspond to fixed capital investment (FCI); 10 % of interest rate; US$ 17 million of fixed cost; US$ 106.2/kg-U of variable production cost, its calculated that break even point/BEP is 50 % for price of nuclear fuel is US$ 350/kg-U without uranium cost. On this economic condition, it was found that the return on investment/ROI is 20.2 %; the internal rate of return/IRR is 11.2 % and the benefit cost ration/BCR is 1.22. For all of above, it was assumed that such nuclear fuel element manufacturing service will be operate in the year of 2012. Some of NEWJEC data have been revised, there were the value of FCI; cost of salary; the value in percent of working capital/WC; the cost of non-uranium materials and the price of product service are US$ 68 million; US$ 4.1 million; 30 %; US$ 100/kg-U and US$ 370/kg-U respectively, where the new data appear as higher than old date from NEWJEC, excluding the cost of salary. For all new economical data in the latest, we found that 45 %; 16.73 %; 11.8 % and 1.25 for BEB; IRR and BCR respectively

  17. Development of an Image Fringe Zero Selection System for Structuring Elements with Stereo Vision Disparity Measurements

    International Nuclear Information System (INIS)

    Grindley, Josef E; Jiang Lin; Tickle, Andrew J

    2011-01-01

    When performing image operations involving Structuring Element (SE) and many transforms it is required that the outside of the image be padded with zeros or ones depending on the operation. This paper details how this can be achieved with simulated hardware using DSP Builder in Matlab with the intention of migrating the design to HDL (Hardware Description Language) and implemented on an FPGA (Field Programmable Gate Array). The design takes few resources and does not require extra memory to account for the change in size of the output image.

  18. Inter-Society Research Committee

    International Nuclear Information System (INIS)

    Akiyama, Mamoru; Higuchi, Masahisa.

    1996-01-01

    World-wide tendencies and circumstances for nuclear power cannot be said to be moving full of sail with a favorable wind, due to nuclear power plant accidents and comparatively little economical benefit. The present Nuclear Power Plant situation is that some personnel understand a need for the development from the viewpoint of efficient energy usage in the world and environmental problems like global warming. At the same time others oppose future nuclear development from the viewpoint of safety problems and economic cost. These issues may end nuclear development worldwide. Nuclear development must be considered from an international viewpoint and other various aspects. Therefore, all countries concerned should cooperative in the adjustment of research carried out by each country. Nuclear power's future must be efficient in the utilization of limited resources (money, manpower and facilities). It is concluded that the ISRC should only discuss technical matters on nuclear engineering, independent from political influence. Societies agreeing to this idea, provide the ISRC with money and/or manpower and/or facilities. The ISRC will consist of a research program committee and research task forces. Members of the Research Program Committee are the chairmen of the research task forces who are also society representatives. The Committee will discuss research programs and resources. The research task forces will consist of one society representative chairman and specialists on the program

  19. Development of Decision-Making Automated System for Optimal Placement of Physical Access Control System’s Elements

    Science.gov (United States)

    Danilova, Olga; Semenova, Zinaida

    2018-04-01

    The objective of this study is a detailed analysis of physical protection systems development for information resources. The optimization theory and decision-making mathematical apparatus is used to formulate correctly and create an algorithm of selection procedure for security systems optimal configuration considering the location of the secured object’s access point and zones. The result of this study is a software implementation scheme of decision-making system for optimal placement of the physical access control system’s elements.

  20. Development of a Detailed Volumetric Finite Element Model of the Spine to Simulate Surgical Correction of Spinal Deformities

    Directory of Open Access Journals (Sweden)

    Mark Driscoll

    2013-01-01

    Full Text Available A large spectrum of medical devices exists; it aims to correct deformities associated with spinal disorders. The development of a detailed volumetric finite element model of the osteoligamentous spine would serve as a valuable tool to assess, compare, and optimize spinal devices. Thus the purpose of the study was to develop and initiate validation of a detailed osteoligamentous finite element model of the spine with simulated correction from spinal instrumentation. A finite element of the spine from T1 to L5 was developed using properties and geometry from the published literature and patient data. Spinal instrumentation, consisting of segmental translation of a scoliotic spine, was emulated. Postoperative patient and relevant published data of intervertebral disc stress, screw/vertebra pullout forces, and spinal profiles was used to evaluate the models validity. Intervertebral disc and vertebral reaction stresses respected published in vivo, ex vivo, and in silico values. Screw/vertebra reaction forces agreed with accepted pullout threshold values. Cobb angle measurements of spinal deformity following simulated surgical instrumentation corroborated with patient data. This computational biomechanical analysis validated a detailed volumetric spine model. Future studies seek to exploit the model to explore the performance of corrective spinal devices.

  1. Human research ethics committees in technical universities.

    Science.gov (United States)

    Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

    2014-07-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

  2. Computational Finite Element Software Assisted Development of a 3D Inductively Coupled Power Transfer System

    Directory of Open Access Journals (Sweden)

    P. Raval

    2014-02-01

    Full Text Available To date inductively coupled power transfer (ICPT systems have already found many practical applications including battery charging pads. In fact, current charging platforms tend to largely support only one- or two-dimensional planar movement in load. This paper proposes a new concept of extending the aspect ratios of the operating power transfer volume of ICPT systems to support arbitrary three dimensional load movements with respect to the primary coils. This is done by use of modern finite element method analysis software to propose the primary and secondary magnetic structures of such an ICPT system. Firstly, two primary magnetic structures are proposed based on contrasting modes of operation and different field directions. This includes a single-phase and multi-phase current model. Next, a secondary magnetic structure is customized to be compatible with both primary structures. The resulting system is shown to produce a 3D power transfer volume for battery cell charging applications.

  3. Development of new extraction agents for separation of rare radioactive elements

    International Nuclear Information System (INIS)

    Hala, J.; Navratil, O.; Prihoda, J.; Smola, J.

    1977-01-01

    Certain transition elements, such as rhodium and palladium may be recovered from waste solutions produced in spent fuel reprocessing. The extraction of palladium was studied using sulfur compounds of the sulfide and sulfoxide types and the effects were investigated of the individual factors on palladium distribution between the aqueous and the organic phases. The possibility of separating hafnium in the form of extractable complexes was tested on several systems. Studied in more detail were mainly the complexes of hafnium with pyrocatechol violet, xylenol orange, and tributyl phosphate. The extraction of other metals, mainly of scandium, europium and indium was investigated in detail in the system acid aqueous phase - organophosphinic acids solution in benzene. (L.K.)

  4. Developing alternative resources of rare earth elements in Europe - EURARE and the red mud challenge

    Science.gov (United States)

    Deady, Eimear; Mouchos, Evangelos; Goodenough, Kathryn; Wall, Frances; Williamson, Ben

    2015-04-01

    Rare earth elements (REE) are considered to be highly "critical" by the European Commission [1], owing to the concentration of global supply [2] and their use in a wide range of emerging technologies (e.g. smart phones, electric cars and wind turbines). The main source of REE is the mineral bastnäsite, which is primarily extracted from carbonatites. Alternative resources of REE have been identified in a variety of other environments such as alluvial placers, bauxites and ore tailings. The EURARE project (www.eurare.eu), funded by the European Commission, aims to improve understanding of potential REE resources in Europe with the overall objective of establishing the basis for a European REE industry. As a part of this project, alternative sources of rare earth elements in Europe are being considered. REE have been identified as being particularly enriched in karst-bauxites and hence in the red muds generated as a waste product from the processing of these bauxites to alumina through the Bayer process [3]. Karst-bauxites are widely distributed with deposits known across the Mediterranean and with intermittent exploitation occurring over many decades. REE become concentrated in the bauxite deposits by the bauxitisation process and are retained due to the geochemical barrier created by the limestone bedrock below. This can result in several processes, including the crystallisation of authigenic REE-bearing minerals, the accumulation of residual phases and the adsorption of ions onto clays and other mineral surfaces [4]. Red muds produced from alumina processing represent a potentially important concentration of REE as it has been demonstrated that the REE pass through the alumina extraction process into the waste, and the total REE concentrations are typically enriched by a factor of two compared with the original bauxite ore [5]. Bauxites and red muds from the Parnassus Ghiona region of Greece [6] and the Seydişehir-Akseki region of Turkey have been assessed as

  5. Development of carbon/carbon composite control rod for HTTR. 1. Preparation of elements and their fracture tests

    International Nuclear Information System (INIS)

    Eto, Motokuni; Ishiyama, Shintaro; Ugachi, Hirokazu

    1996-08-01

    For the High Temperature Engineering Test Reactor(HTTR) the control rod sleeve is made of Alloy 800H for which a particular process is imposed when the reactor needs to be scrammed. The less restricted operation of the reactor would be attained if there would be the control rod more resistant to high temperature and neutron irradiation. This report summarizes the results which have been obtained as of March 1996 in the course of the development of the C/C composite control rod. Materials used were pitch- or PAN-based fiber-reinforced 2-dimensional carbon composites, from which preforms of the elements of a control rod were fabricated. The preforms were carbonized at 1000degC after being impregnated with pitch. Then they were graphitized at 3000degC, followed by a purification treatment with halogen. The elements included the pellet holder, lace truck and pin. The pin was fabricated by the fiber laminating technique. A control rod is to consist of pellet holders which are connected by the lace trucks with pins. Various strength tests were carried out on these elements. An irradiation of the elements made of PAN-based material was performed in JRR-3 at 900±50degC to a neutron fluence of 1x10 25 n/m 2 (E>29fJ). As for the strength tests on the elements, there were some differences between PAN- and pitch-based composites: In general, elements made of PAN-based composite showed the more plastic behavior before they fractured, whereas those of pitch-based material behaved in the more brittle manner. Fracture tests of the irradiated elements showed that fracture load and fracture displacement enough for assuring the integrity of the control rod structure were maintained even after the irradiation. It was also found that if the applied load was parallel to the fiber felt plane both fracture load and strain increased, whereas the load increase and strain decrease were observed for the applied load against the plane. (J.P.N.)

  6. Investigation of dissipation elements in a fully developed turbulent channel flow by tomographic particle-image velocimetry

    Science.gov (United States)

    Schäfer, L.; Dierksheide, U.; Klaas, M.; Schröder, W.

    2011-03-01

    A new method to describe statistical information from passive scalar fields has been proposed by Wang and Peters ["The length-scale distribution function of the distance between extremal points in passive scalar turbulence," J. Fluid Mech. 554, 457 (2006)]. They used direct numerical simulations (DNS) of homogeneous shear flow to introduce the innovative concept. This novel method determines the local minimum and maximum points of the fluctuating scalar field via gradient trajectories, starting from every grid point in the direction of the steepest ascending and descending scalar gradients. Relying on gradient trajectories, a dissipation element is defined as the region of all the grid points, the trajectories of which share the same pair of maximum and minimum points. The procedure has also been successfully applied to various DNS fields of homogeneous shear turbulence using the three velocity components and the kinetic energy as scalar fields [L. Wang and N. Peters, "Length-scale distribution functions and conditional means for various fields in turbulence," J. Fluid Mech. 608, 113 (2008)]. In this spirit, dissipation elements are, for the first time, determined from experimental data of a fully developed turbulent channel flow. The dissipation elements are deduced from the gradients of the instantaneous fluctuation of the three velocity components u', v', and w' and the instantaneous kinetic energy k', respectively. The measurements are conducted at a Reynolds number of 1.7×104 based on the channel half-height δ and the bulk velocity U. The required three-dimensional velocity data are obtained investigating a 17.75×17.75×6 mm3 (0.355δ×0.355δ×0.12δ) test volume using tomographic particle-image velocimetry. Detection and analysis of dissipation elements from the experimental velocity data are discussed in detail. The statistical results are compared to the DNS data from Wang and Peters ["The length-scale distribution function of the distance between

  7. Development of carbon/carbon composite control rod for HTTR. 1. Preparation of elements and their fracture tests

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Motokuni; Ishiyama, Shintaro; Ugachi, Hirokazu [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-08-01

    For the High Temperature Engineering Test Reactor(HTTR) the control rod sleeve is made of Alloy 800H for which a particular process is imposed when the reactor needs to be scrammed. The less restricted operation of the reactor would be attained if there would be the control rod more resistant to high temperature and neutron irradiation. This report summarizes the results which have been obtained as of March 1996 in the course of the development of the C/C composite control rod. Materials used were pitch- or PAN-based fiber-reinforced 2-dimensional carbon composites, from which preforms of the elements of a control rod were fabricated. The preforms were carbonized at 1000degC after being impregnated with pitch. Then they were graphitized at 3000degC, followed by a purification treatment with halogen. The elements included the pellet holder, lace truck and pin. The pin was fabricated by the fiber laminating technique. A control rod is to consist of pellet holders which are connected by the lace trucks with pins. Various strength tests were carried out on these elements. An irradiation of the elements made of PAN-based material was performed in JRR-3 at 900{+-}50degC to a neutron fluence of 1x10{sup 25} n/m{sup 2} (E>29fJ). As for the strength tests on the elements, there were some differences between PAN- and pitch-based composites: In general, elements made of PAN-based composite showed the more plastic behavior before they fractured, whereas those of pitch-based material behaved in the more brittle manner. Fracture tests of the irradiated elements showed that fracture load and fracture displacement enough for assuring the integrity of the control rod structure were maintained even after the irradiation. It was also found that if the applied load was parallel to the fiber felt plane both fracture load and strain increased, whereas the load increase and strain decrease were observed for the applied load against the plane. (J.P.N.)

  8. Developing common information elements for renewable energy systems: summary and proceedings of the SERI/AID workshop

    Energy Technology Data Exchange (ETDEWEB)

    Ashworth, J.H.; Neuendorffer, J.W.

    1980-06-01

    This report describes the activities, conclusions, and recommendations of the Workshop on Evaluation Systems for Renewable Energy Systems sponsored by the Agency for International Development and SERI, held 20-22 February 1980 in Golden, Colorado. The primary objectives of the workshop was to explore whether it was possible to establish common information elements that would describe the operation and impact of renewable energy projects in developing countries. The workshop provided a forum for development program managers to discuss the information they would like to receive about renewable energy projects and to determine whether common data could be agreed on to facilitate information exchange among development organizations. Such information could be shared among institutions and used to make informed judyments on the economic, technical, and social feasibility of the technologies. Because developing countries and foreign assistance agencies will be financing an increasing number of renewable energy projects, these organizations need information on the field experience of renewable energy technologies. The report describes the substance of the workshop discussions and includes the papers presented on information systems and technology evaluation and provides lists of important information elements generated by both the plenary sessions and the small working groups.

  9. European Committee for Future Accelerators

    International Nuclear Information System (INIS)

    Mulvey, John

    1983-01-01

    Nearly 21 years ago, in December 1962, Viktor Weisskopf and Cecil Powell, then respectively CERN's Director General and Chairman of the Scientific Policy Committee, called together a group of European high energy physicists to advise on steps to reach higher energy. The CERN PS had been in operation since 1959, its experimental programme was well established and the time had come to think of the future. The Chairman of the group, which later took the title 'European Committee for Future Accelerators', was Edoardo Amaldi and his influential report, presented to the CERN Council in June 1963, reviewed the whole structure and possible development of the field in the CERN Member States. Its proposals included the construction of the Intersecting Storage Rings (ISR), and of a 300 GeV proton accelerator which was then envisaged as being the major facility of a second CERN Laboratory elsewhere in Europe

  10. Standing Concertation Committee

    CERN Document Server

    HR Department

    2010-01-01

    Main issues examined at the meeting of 2 October 2009 The October 2009 meeting of the Standing Concertation Committee was entirely devoted to preparation of TREF’s meeting on 21-22 October. The Committee took note of, discussed and agreed on clarifications needed to some of the documents and presentations that the Management intended to submit and/or present to TREF on the following subjects: Equal opportunities The Committee took note of a preliminary report on equal opportunities at CERN drawn up by D. Chromek-Burckhart, the Equal Opportunities Officer, and T. Smith, Chairman of the Equal Opportunities Advisory Panel, containing in particular a proposal for a new process for resolving harassment conflicts. Technical analysis of the CERN Health Insurance Scheme - Actuary’s Report The Committee took note of a presentation by P. Charpentier, Chairman of the CERN Health Insurance Supervisory Board (CHIS Board), on the 2009 actuarial report on the CERN Health Insurance Scheme (CHIS). Th...

  11. Standing Concertation Committee

    CERN Document Server

    HR Department

    2008-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2008 The main items discussed at the meetings of the Standing Concertation Committee on 27 February 2008 included: Short-term Saved Leave Scheme The Committee noted that, by the end of February 2008, some 600 staff had enrolled in the short-term saved leave scheme: approx. 58% had signed up for 1 slice, 14% for two slices, 5% for three slices and 23% for four slices. Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme The Committee agreed to recommend the Director-General to approve Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme. Administrative Circular No. 30 (Rev. 2) - Financial benefits upon taking up appointment and termination of contract The Committee agreed to recommend the Director-General to approve Administrative Circular No. 30 (Rev. 2) - Financial Benefits upon taking up appointment and termination of contract. Progressive Retirement Programme The Progressive Retirement Programme (PR...

  12. Elements in a new sustainable industrial culture - Environmental assessment in product development

    DEFF Research Database (Denmark)

    Alting, Leo; Hauschild, Michael Zwicky; Wenzel, Henrik

    1997-01-01

    In the last few years the environmental focus in the manufacturing industry has shifted from the manufacturing processes to the products themselves, as these are accountable for the environmental impacts in all life cycle phases. The paper describes for 3 industrial cases how a newly developed LCA...... methodology can assist the product developer in development of more environmentally friendly products. Finally, common experience gained will be discussed....

  13. Role of dietary factors and food habits in the development of childhood obesity: a commentary by the ESPGHAN Committee on Nutrition

    NARCIS (Netherlands)

    Agostoni, Carlo; Braegger, Christian; Decsi, Tamas; Kolacek, Sanja; Koletzko, Berthold; Mihatsch, Walter; Moreno, Luis A.; Puntis, John; Shamir, Raanan; Szajewska, Hania; Turck, Dominique; van Goudoever, Johannes

    2011-01-01

    This Comment by the Committee on Nutrition of the European Society for Paediatric Gastroenterology, Hepatology, and Nutrition aims to provide a summary of the role of nutrition-related factors on obesity prevention in children ages 2 to 18 years. This Comment emphasizes that dietary interventions

  14. The Elements of Language Curriculum: A Systematic Approach to Program Development.

    Science.gov (United States)

    Brown, James Dean

    A systematic approach to second language curriculum development is outlined, enumerating the phases and activities involved in developing and implementing a sound and effective language program. The first chapter describes a system whereby all language teaching activities can be classified into approaches, syllabuses, techniques, exercises, or…

  15. Conflicts of Interest: An Indispensable Element of Education for Sustainable Development

    Science.gov (United States)

    Lundegard, Iann; Wickman, Per-Olof

    2007-01-01

    A central concept introduced in the Nordic debate on sustainable development is "action competence". The concept has been defined as a competence of learners, i.e. the ability to take into consideration the social factors and human conflict of interest that lies behind environmental questions and sustainable development. The concern of…

  16. High-uranium-loaded U3O8-Al fuel element development program [contributed by N.M. Martin, ORNL

    International Nuclear Information System (INIS)

    Martin, M.M.

    1993-01-01

    The High-Uranium-Loaded U 3 O 8 -Al Fuel Element Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages. The specific objective of the program is to develop the technological and engineering data base for U 3 O 8 -Al plate-type fuel elements of maximal uranium content to the point of vendor qualification for full scale fabrication on a production basis. A program and management plan that details the organization, supporting objectives, schedule, and budget is in place and preparation for fuel and irradiation studies is under way. The current programming envisions a program of about four years duration for an estimated cost of about two million dollars. During the decades of the fifties and sixties, developments at Oak Ridge National Laboratory led to the use of U 3 O 8 -Al plate-type fuel elements in the High Flux Isotope Reactor, Oak Ridge Research Reactor, Puerto Rico Nuclear Center Reactor, and the High Flux Beam Reactor. Most of the developmental information however applies only up to a uranium concentration of about 55 wt % (about 35 vol % U 3 O 8 ). The technical issues that must be addressed to further increase the uranium loading beyond 55 wt % involve plate fabrication phenomena of voids and dogboning, fuel behavior under long irradiation, and potential for the thermite reaction between U 3 O 8 and aluminum. (author)

  17. Hysteresis and reluctance electric machines with bulk HTS elements. Recent results and future development

    International Nuclear Information System (INIS)

    Kovalev, L.K.; Ilushin, K.V.; Penkin, V.T.; Kovalev, K.L.; Koneev, S.M.-A.; Poltavets, V.N.; Larionoff, A.E.; Modestov, K.A.; Larionoff, S.A.; Gawalek, W.; Habisreuther, T.; Oswald, B.; Best, K.-J.; Strasser, T.

    2000-01-01

    Two new types of HTS electric machine are considered. The first type is hysteresis motors and generators with cylindrical and disc rotors containing bulk HTS elements. The second type is reluctance motors with compound HTS-ferromagnetic rotors. The compound HTS-ferromagnetic rotors, consisting of joined alternating bulk HTS (YBCO) and ferromagnetic (iron) plates, provide a new active material for electromechanical purposes. Such rotors have anisotropic properties (ferromagnetic in one direction and diamagnetic in the perpendicular one). Theoretical and experimental results for HTS hysteresis and reluctance motors are presented. A series of hysteresis HTS motors with output power rating from 1 kW (at 50 Hz) up to 4 kW (at 400 Hz) and a series of reluctance HTS motors with output power 2-18.5 kW (at 50 Hz) were constructed and successfully tested. It was shown that HTS reluctance motors could reach two to five times better overall dimensions and specific power than conventional asynchronous motors of the same size and will have higher values of power factor (cos φ≥0.7 to 0.8). (author)

  18. Development of a Rapidly Deployed Department of Energy Emergency Response Element

    International Nuclear Information System (INIS)

    Riland, C.A.; Hopkins, R.C.; Tighe, R.J.

    1999-01-01

    The Federal Radiological Emergency Response Plan (FRERP) directs the Department of Energy (DOE) to maintain a viable, timely, and fully documented response option capable of supporting the responsible Lead Federal Agency in the event of a radiological emergency impacting any state or US territory (e.g., CONUS). In addition, the DOE maintains a response option to support radiological emergencies outside the continental US (OCONUS). While the OCUNUS mission is not governed by the FREP, this response is operationally similar to that assigned to the DOE by the FREP. The DOE is prepared to alert, activate, and deploy radiological response teams to augment the Radiological Assistance Program and/or local responders. The Radiological Monitoring and Assessment Center (RMAC) is a phased response that integrates with the Federal Radiological Monitoring and Assessment Center (FRMAC) in CONUS environments and represents a stand-alone DOE response for OCONUS environments. The FRMAC/RMAC Phase I was formally ''stood up'' as an operational element in April 1999. The FRMAC/RMAC Phase II proposed ''stand-up'' date is midyear 2000

  19. Development of triple scale finite element analyses based on crystallographic homogenization methods

    International Nuclear Information System (INIS)

    Nakamachi, Eiji

    2004-01-01

    Crystallographic homogenization procedure is implemented in the piezoelectric and elastic-crystalline plastic finite element (FE) code to assess its macro-continuum properties of piezoelectric ceramics and BCC and FCC sheet metals. Triple scale hierarchical structure consists of an atom cluster, a crystal aggregation and a macro- continuum. In this paper, we focus to discuss a triple scale numerical analysis for piezoelectric material, and apply to assess a macro-continuum material property. At first, we calculate material properties of Perovskite crystal of piezoelectric material, XYO3 (such as BaTiO3 and PbTiO3) by employing ab-initio molecular analysis code CASTEP. Next, measured results of SEM and EBSD observations of crystal orientation distributions, shapes and boundaries of a real material (BaTiO3) are employed to define an inhomogeneity of crystal aggregation, which corresponds to a unit cell of micro-structure, and satisfies the periodicity condition. This procedure is featured as a first scaling up from the molecular to the crystal aggregation. Finally, the conventional homogenization procedure is implemented in FE code to evaluate a macro-continuum property. This final procedure is featured as a second scaling up from the crystal aggregation (unit cell) to macro-continuum. This triple scale analysis is applied to design piezoelectric ceramic and finds an optimum crystal orientation distribution, in which a macroscopic piezoelectric constant d33 has a maximum value

  20. Development of a Simple Traffic Sensor and System with Vehicle Classification Based on PVDF Film Element

    Directory of Open Access Journals (Sweden)

    D. R. SANTOSO

    2011-03-01

    Full Text Available In this paper, piezoelectric sensor system for measuring traffic flow with vehicle classification is proposed and investigated. Sensing element is made of PVDF film, which on both sides plastered with sheets of metal electrodes for making electrical connections. This sensor will generate electric voltage when subjected to mechanical pressure by the wheels of the vehicle. The signal conditioning is required to make sensor output voltage in the range of 0-5 Volts. To classify the types of vehicles crossing the sensor, three-level comparator is used, with specifications of a low voltage reference for motorcycles, medium voltage reference for a family vehicle, and a high voltage reference for buses, trucks and the like. Output of the comparators are already a logic '0' or '1' is then processed by a microcontroller based data acquisition system that the output shows the number and type of vehicles that crossed the road in the form of digital code. These data then transmitted to a control centre that was built based on a PC. At the control centre, traffic data tabulated in the form of measurement database and stored for further analysis.

  1. The Development of the Low-Cost Titanium Alloy Containing Cr and Mn Alloying Elements

    Science.gov (United States)

    Zhu, Kailiang; Gui, Na; Jiang, Tao; Zhu, Ming; Lu, Xionggang; Zhang, Jieyu; Li, Chonghe

    2014-04-01

    The α + β-type Ti-4.5Al-6.9Cr-2.3Mn alloy has been theoretically designed on the basis of assessment of the Ti-Al-Cr-Mn thermodynamic system and the relationship between the molybdenum equivalent and mechanical properties of titanium alloys. The alloy is successfully prepared by the split water-cooled copper crucible, and its microstructures and mechanical properties at room temperature are investigated using the OM, SEM, and the universal testing machine. The results show that the Ti-4.5Al-6.9Cr-2.3Mn alloy is an α + β-type alloy which is consistent with the expectation, and its fracture strength, yield strength, and elongation reach 1191.3, 928.4 MPa, and 10.7 pct, respectively. Although there is no strong segregation of alloying elements under the condition of as-cast, the segregation of Cr and Mn is obvious at the grain boundary after thermomechanical treatment.

  2. Development of a Cl-impregnated activated carbon for entrained-flow capture of elemental mercury.

    Science.gov (United States)

    Ghorishi, S Behrooz; Keeney, Robert M; Serre, Shannon D; Gullett, Brian K; Jozewicz, Wojciech S

    2002-10-15

    Efforts to discern the role of an activated carbon's surface functional groups on the adsorption of elemental mercury (Hg0) and mercuric chloride demonstrated that chlorine (Cl) impregnation of a virgin activated carbon using dilute solutions of hydrogen chloride leads to increases (by a factor of 2-3) in fixed-bed capture of these mercury species. A commercially available activated carbon (DARCO FGD, NORITAmericas Inc. [FGD])was Cl-impregnated (Cl-FGD) [5 lb (2.3 kg) per batch] and tested for entrained-flow, short-time-scale capture of Hg0. In an entrained flow reactor, the Cl-FGD was introduced in Hg0-laden flue gases (86 ppb of Hg0) of varied compositions with gas/solid contact times of about 3-4 s, resulting in significant Hg0 removal (80-90%), compared to virgin FGD (10-15%). These levels of Hg0 removal were observed across a wide range of very low carbon-to-mercury weight ratios (1000-5000). Variation of the natural gas combustion flue gas composition, by doping with nitrogen oxides and sulfur dioxide, and the flow reactor temperature (100-200 degrees C) had minimal effects on Hg0 removal bythe Cl-FGD in these carbon-to-mercury weight ratios. These results demonstrate significant enhancement of activated carbon reactivity with minimal treatment and are applicable to combustion facilities equipped with downstream particulate matter removal such as an electrostatic precipitator.

  3. Development and testing of the EDF-2 reactor fuel element; Essais et mise au point de l'element combustible pour le reacteur EDF-2

    Energy Technology Data Exchange (ETDEWEB)

    Delpeyroux, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Furhmann, R [Societe Industrielle de Combustible Nucleaire (France)

    1964-07-01

    This technical report reviews the work which has been necessary for defining the EDF-2 fuel element. After giving briefly the EDF-2 reactor characteristics and the preliminary choice of parameters which made it possible to draw up a draft plan for the fuel element, the authors consider the research proper: - Uranium studies: tests on the passage into the {beta} phase of an internal crown of a tube, bending of the tube under the effect of a localized force, welding of the end-pellets and testing for leaks. The resistance of the tube to crushing and of the pellets to yielding under the external pressure have been studied in detail in another CEA report. - Can studies: conditions of production and leak proof testing of the can, resistance of the fins to creep due to the effect of the gas flow. - Studies of the extremities of the element: creep under compression and welding of the plugs to the can. - Cartridge studies: determination of the characteristics of the can fuel fixing grooves and of the canning conditions, verification of the resistance of the fuel element to thermal cycling, determination of the temperature drop at the can-fuel interface dealt with in more detail in another CEA report. - Studies of the whole assembly: this work which concerns the graphite jacket, the support and the cartridge vibrations has been carried out by the Mechanical and Thermal Study Service (Mechanics Section). In this field the Fuel Element Study Section has investigated the behaviour of the centering devices in a gas current. The outcome of this research is the defining of the plan of the element the production process and the production specifications. The validity of ail these out-of-pile tests will be confirmed by the in-pile tests already under way and by irradiation of the elements in the EDF-2 reactor itself. In conclusion the programme is given for improving the fuel element and for defining the fuel element for the second charge. (authors) [French] Ce rapport technique

  4. Branding as an Element of the Strategy of Social and Economic Development of the City

    Directory of Open Access Journals (Sweden)

    Bielikova Nadiia V.

    2017-03-01

    Full Text Available The analysis of the evolutionary stages of the scientific and methodological support of the branding of cities is presented and the components of the city brand related to the basic indicators of its social and economic development are proposed. It is proved that under the current conditions of economic globalization and regional integration, the competition between territories is intensifying, which requires local authorities to develop new approaches to the branding of cities. The aim of the article is to substantiate the components of the city branding in the development of the strategy of social and economic development of the city. Analysis of the stages of evolution of scientific and methodological support for the branding of cities demonstrates the expansion of its tools and its inclusion in the strategies of social and economic development of cities. It is determined that the main constituents of the city brand are: importance of the city in the country and the region; human capital; economy, industry, innovations; ease of doing business; health protection; education, culture, sport, urban infrastructure. Methodical approach to the implementation of the city branding within the framework of its socio-economic development strategy involves the implementation of interrelated stages: SWOT analysis of the social and economic system of the city; formation of the list of competitive advantages of the city; determination of priority directions for the development of the city, etc.

  5. The Use of the STAGS Finite Element Code in Stitched Structures Development

    Science.gov (United States)

    Jegley, Dawn C.; Lovejoy, Andrew E.

    2014-01-01

    In the last 30 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft more fuel-efficient and more affordable. The focus on the airframe has been to reduce weight, improve damage tolerance and better understand structural behavior under realistic flight and ground loading conditions. Stitched structure is a technology that can address the weight savings, cost reduction, and damage tolerance goals, but only if it is supported by accurate analytical techniques. Development of stitched technology began in the 1990's as a partnership between NASA and Boeing (McDonnell Douglas at the time) under the Advanced Composites Technology Program and has continued under various titles and programs and into the Environmentally Responsible Aviation Project today. These programs contained development efforts involving manufacturing development, design, detailed analysis, and testing. Each phase of development, from coupons to large aircraft components was supported by detailed analysis to prove that the behavior of these structures was well-understood and predictable. The Structural Analysis of General Shells (STAGS) computer code was a critical tool used in the development of many stitched structures. As a key developer of STAGS, Charles Rankin's contribution to the programs was quite significant. Key features of STAGS used in these analyses and discussed in this paper include its accurate nonlinear and post-buckling capabilities, its ability to predict damage growth, and the use of Lagrange constraints and follower forces.

  6. Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

    Science.gov (United States)

    Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

    1991-01-01

    An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

  7. Empirical study of the important elements in the researcher development journey

    Directory of Open Access Journals (Sweden)

    Anthony E. Ward

    2013-03-01

    Full Text Available This paper presents the results of a study into what is important in the researcher development journey as perceived by students, academic supervisors and research administrators. The study was undertaken within the Department of Electronics at the University of York to test the survey instrument for a wider, multidisciplinary and multi-institutional survey. It was undertaken in the National context of a focus on the importance of postgraduate skills development being an integral part of the researcher journey. An integrated support system is used in the department for all postgraduate students. Results show that students and supervisors both agree that helping the student gain a PhD and seeing them as a professional researcher are of high importance. Research outputs were rated lowest for students and both rate administrative needs low. The study informs engagement with the administrative and skills development agendas thinking and is being used by the system development team.

  8. Development of fabrication process of upper nozzle BIBLIS type of PWR fuel element

    International Nuclear Information System (INIS)

    Miranda, O.; Lorenzo, D.F.R.

    1982-01-01

    Process and parameters of milling and welding of a upper nozzle BIBLIS type prototype are presented. Milling process, cutting tools studies, production devices and inspection were developed and researched. (author) [pt

  9. Considerations on the national forestall development as fundamental element for the sustainable development and the peace in Colombia

    International Nuclear Information System (INIS)

    Forero Gonzalez, Jorge

    2000-01-01

    The document analyzes the forestall resource and its development and its affectation for adverse situations of the social, economic and political order; it also speaks about the forestall conditions that it presents the country and if these they can contribute to the economic, social and environmental development and also to contribute to the process of peace in Colombia

  10. High-uranium-loaded U3O8--Al fuel element development program

    International Nuclear Information System (INIS)

    Martin, M.M.

    1978-01-01

    The High-Uranium-Loaded U 3 O 8 --Al Fuel Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages

  11. ETHICS AND ORGANIZATIONAL CULTURE – KEY ELEMENTS REGARDING THE DEVELOPMENT OF ECONOMIC ACTIVITIES

    Directory of Open Access Journals (Sweden)

    Loredana TEREC-VLAD

    2016-02-01

    Full Text Available The aim of this paper is to analyse the organizational culture within the business environment. The paper analyzes the ethical criteria of the entrepreneurs and the way they relate to the consumer, as well as the reinforcement of the moral values so that the final result of the economic activity is represented by sustainability and economic profit. We thought it would be important to point out that promoting an ethical firm can ensure the well-needed trust capital in a constantly changing society. In this context, corporate responsibility is a key element that ensures both the sustainability of the company as well as the sustainability of the relations with the business partners. In our view, a strong corporate culture must integrate ethics and responsibility in all its activities, since the focus is often laid on obtaining profit, not on the values ​​that should lead the organization towards success over a long period of time. Since our society provides both positive and negative information regarding any company or organization, the focus should be laid increasingly more on the ethics and responsibility of the human resources in regard to the external environment of the company. We thought it would be appropriate to bring up these issues since the issue of building an organizational culture is at a very early stage in our country, and most entrepreneurs only aim at obtaining short-term profit. The fees and taxes are high and the thick legislation often does not provide alternatives; therefore, one must take into account the fact that the real profit is not represented by the short-term benefits, but rather by the benefits obtained in a constant manner over medium-long periods of time.

  12. Development of a 3D finite element model of lens microcirculation

    Directory of Open Access Journals (Sweden)

    Vaghefi Ehsan

    2012-09-01

    Full Text Available Abstract Background It has been proposed that in the absence of a blood supply, the ocular lens operates an internal microcirculation system. This system delivers nutrients, removes waste products and maintains ionic homeostasis in the lens. The microcirculation is generated by spatial differences in membrane transport properties; and previously has been modelled by an equivalent electrical circuit and solved analytically. While effective, this approach did not fully account for all the anatomical and functional complexities of the lens. To encapsulate these complexities we have created a 3D finite element computer model of the lens. Methods Initially, we created an anatomically-correct representative mesh of the lens. We then implemented the Stokes and advective Nernst-Plank equations, in order to model the water and ion fluxes respectively. Next we complemented the model with experimentally-measured surface ionic concentrations as boundary conditions and solved it. Results Our model calculated the standing ionic concentrations and electrical potential gradients in the lens. Furthermore, it generated vector maps of intra- and extracellular space ion and water fluxes that are proposed to circulate throughout the lens. These fields have only been measured on the surface of the lens and our calculations are the first 3D representation of their direction and magnitude in the lens. Conclusion Values for steady state standing fields for concentration and electrical potential plus ionic and fluid fluxes calculated by our model exhibited broad agreement with observed experimental values. Our model of lens function represents a platform to integrate new experimental data as they emerge and assist us to understand how the integrated structure and function of the lens contributes to the maintenance of its transparency.

  13. Barriers and challenges in clinical ethics consultations: the experiences of nine clinical ethics committees.

    Science.gov (United States)

    Pedersen, Reidar; Akre, Victoria; Førde, Reidun

    2009-10-01

    Clinical ethics committees have recently been established in nearly all Norwegian hospital trusts. One important task for these committees is clinical ethics consultations. This qualitative study explores significant barriers confronting the ethics committees in providing such consultation services. The interviews with the committees indicate that there is a substantial need for clinical ethics support services and, in general, the committee members expressed a great deal of enthusiasm for the committee work. They also reported, however, that tendencies to evade moral disagreement, conflict, and 'outsiders' are common in the hospitals. Sometimes even the committees comply with some of these tendencies. The committees agree that there is a need to improve their routines and procedures, clarify the committees' profile and field of responsibility, to make the committees well-known, to secure adequate operating conditions, and to develop organizational integration and support. Various strategies to meet these challenges on a local, regional or national level are also explored in this paper.

  14. Development of a certified reference material (NMIJ CRM 7505-a) for the determination of trace elements in tea leaves.

    Science.gov (United States)

    Zhu, Yanbei; Narukawa, Tomohiro; Inagaki, Kazumi; Kuroiwa, Takayoshi; Chiba, Koichi

    2011-01-01

    A certified reference material (CRM) for trace elements in tea leaves has been developed in National Metrology Institute of Japan (NMIJ). The CRM was provided as a dry powder (<90 µm) after frozen pulverization of washed and dried fresh tea leaves from a tea plant farm in Shizuoka Prefecture, Japan. Characterization of the property value for each element was carried out exclusively by NMIJ with at least two independent analytical methods, including inductively coupled plasma mass spectrometry (ICP-MS), high-resolution (HR-) ICP-MS, isotope-dilution (ID-) ICP-MS, inductively coupled plasma optical emission spectrometry (ICP-OES), graphite-furnace atomic-absorption spectrometry (GF-AAS) and flame atomic-absorption spectrometry (FAAS). Property values were provided for 19 elements (Ca, K, Mg, P, Al, B, Ba, Cd, Cu, Fe, Li, Mn, Na, Ni, Pb, Rb, Sr, Zn and Co) and informative values for 18 elements (Ti, V, Cr, Y, and all of the lanthanides, except for Pm whose isotopes are exclusively radioactive). The concentration ranges of property values and informative values were from 1.59% (mass) of K to 0.0139 mg kg(-1) of Cd and from 0.6 mg kg(-1) of Ti to 0.0014 mg kg(-1) of Lu, respectively. Combined relatively standard uncertainties of the property values were estimated by considering the uncertainties of the homogeneity, analytical methods, characterization, calibration standard, and dry-mass correction factor. The range of the relative combined standard uncertainties was from 1.5% of Mg and K to 4.1% of Cd.

  15. Behaviour of elements in soils developed from nephelinites at Mount Etinde (Cameroon): Impact of hydrothermal versus weathering processes

    Science.gov (United States)

    Etame, J.; Gerard, M.; Bilong, P.; Suh, C. E.

    2009-05-01

    The progressive weathering of 0.65 Ma nephelinites from Mount Etinde (South Western Cameroon) in a humid tropical setting has resulted in the formation of a 150 cm thick weathering crust. The soil profiles consist of three horizons: Ah/Bw/C. A major differentiation of the chemical and mineralogical parameters is related to the complexity of the saprolites, some of which were hydrothermally altered. Bulk geochemical and microgeochemical analyses were performed on selected minerals from the different horizons of two reference profiles, of which one (E 4) was developed from unaltered nephelinite (nephelinite U) while the other (BO 1) formed from hydrothermally altered nephelinite (nephelinite H). The results show that the primary minerals (clinopyroxene, nepheline, leucite, haüyne, titanomagnetite, perovskite, apatite and sphene) experienced differential weathering rates with primary minerals rich in rare earth elements (titanomagnetite, perovskite, apatite and sphene) surviving in the saprolite and the Bw horizons. The weathering of the primary minerals is reflected in the leaching of alkaline and alkaline-earth elements, except for Ba and Rb in the hydrothermalised nephelinite soil. The order of mobility is influenced by hydrothermal processes: Na > K > Rb > Ca > Cs > Sr in nephelinite U soil , Na > K > Sr > Ca > Mg in nephelinite H soil; Rb/Sr and Sr/Mg can be used as indicators of the kinetic of the weathering on nephelinite U and on nephelinite H. Barium enrichment is related to variable concentrations in the nephelinites, to the formation of crandallites and the leaching of surface horizons. The content of metallic elements is higher in nephelinite H soil than in the nephelinite U soil. Results show that hydrothermal alteration leads to an enrichment of light (La, Ce, Nd) and intermediate (Sm, Eu, Dy) rare earth elements. The enrichment in Cr and Pb in the surface horizons is discussed in relation to organic matter activity, the dissolution of magnetites, and

  16. Enhancing the European Union’s Development Strategy in Afghanistan

    Science.gov (United States)

    2010-06-01

    REE Rare Earth Element SCA Swedish Committee for Afghanistan SIDA Swedish International Development Cooperation Agency SIGAR Special Inspector...member states such as Ireland’s Development Cooperation Ireland (DCI), Sweden’s Swedish International Development Cooperation Agency ( SIDA ), and the...Command and General Staff College, June 2008.) 71. 142 Swedish International Development Cooperation Agency, “Afghanistan Sida Country Report 2005

  17. Effects of rare earth elements La and Yb on the morphological and functional development of zebrafish embryos

    Institute of Scientific and Technical Information of China (English)

    Jun'an Cui; Zhiyong Zhang; Wei Bai; Ligang Zhang; Xiao He; Yuhui Ma; Yan Liu; Zhifang Chai

    2012-01-01

    In recent years,with the wide applications and mineral exploitation of rare earth elements,their potential environmental and health effects have caused increasing public concern.Effect of rare earth elements La and Yb on the morphological and functional development of zebrafish embryos were studied.The embryos were exposed to La3+ or Yb3+ at 0,0.01,0.1,0.3,0.5 and 1.0 mmol/L,respectively.Early life stage parameters such as egg and embryo mortality,gastrula development,tail detachment,eyes,somite formation,circulatory system,pigmentation,malformations,hatching rate,length of larvae and mortality were investigated.The results showed La3+ and Yb3+ delayed zebrafish embryo and larval development,decreased survival and hatching rates,and caused tail malformation in a concentration-dependent way.Moreover,heavy rare-earth ytterbium led to more severe acute toxicity of zebrafish embryo than light rare-earth lanthanum.

  18. System for Conservation of Specially Protected Natural Areas as Sustainable Urban Development Element

    Science.gov (United States)

    Kryakhtunov, A.; Pelymskaya, O.; Chernykh, E.

    2017-11-01

    The article is devoted to the problem of the conservation of specially protected natural territories. The research topic is especially interesting for urban areas that provide sustainable urban development. The authors consider the main aspects of the sustainable settlement development and substantiate the direct dependence of the evolution of territories in the implementation of urban development activities with the ecological framework of a city. The object of the study is a specially protected natural area located in Western Siberia in the city of Tyumen, the Tyumen region. As a result of the analysis, the main problems of preservation of the nature monument of regional importance were revealed as well as a set of measures and management decisions regarding the conservation of the forest park.

  19. Organizational Size: A Key Element In The Development Of Private Enterprises In The Less Developed Countries: The Case Of Ecuador

    OpenAIRE

    John Demetrios Theodore

    2011-01-01

    The purpose of this article was to examine and evaluate the prerequisites needed in private enterprises in Ecuador that are conducive to economic development and determine if economic development via this choice is feasible. The prerequisites are ample organizational size, a situation that allows the formation of a well-constructed and viable organizational structure with three hierarchal levels and sufficient departmentalization. All of the above permits the formation, sustenance, and develo...

  20. ITER technical advisory committee meeting

    International Nuclear Information System (INIS)

    Fujiwara, M.

    2001-01-01

    The 17th Meeting of the ITER Technical Advisory Committee (TAC-17) was held on February 19-22, the ITER Garching Work Site in Germany. The objective of the meeting was to review the Draft Final Design Report of ITER-FEAT and assess the ability of the self-consistent overall design both to satisfy the technical objectives previously defined and to meet the cost limitations. TAC-17 was also organized to confirm that the design and critical elements, with emphasis on the key recommendations made at previous TAC meetings, are such as to extend the confidence in starting ITER construction. It was also intended to provide the ITER Council, scheduled to meet on 27 and 28 February in Toronto, with a technical assessment and key recommendations of the above mentioned report

  1. Sustainable development, tourism and territory. Previous elements towards a systemic approach

    Directory of Open Access Journals (Sweden)

    Pierre TORRENTE

    2009-01-01

    Full Text Available Today, tourism is one of the major challenges for many countries and territories. The balance of payments, an ever-increasing number of visitors and the significant development of the tourism offer clearly illustrate the booming trend in this sector. This macro-economic approach is often used by the organizations in charge of tourism, WTO for instance. Quantitative assessments which consider the satisfaction of customers’ needs as an end in itself have prevailed both in tourism development schemes and in prospective approaches since the sixties.

  2. CORPORATE VOLUNTEERING AS AN ELEMENT OF SUSTAINABLE DEVELOPMENT OF THE ORGANIZATION

    Directory of Open Access Journals (Sweden)

    Natalia Ivanovna Gorlova

    2018-01-01

    Full Text Available Purpose. The article is devoted to the topic of development of corporate volunteering, which is topical for Russian society. The subject of the analysis is corporate volunteering in Russia and its impact on the sustainable development of the organization. Corporate volunteering is seen at the intersection of the interests of the company, employees and the local community. The aim of the research is a theoretical analysis of modern practices of corporate volunteer activity as a factor of sustainable development of the organization. Methodology. Within the framework of the article, using the method of comparison and grouping, we analyzed and studied the materials of the latest international and Russian studies based on expert opinions from business, government, civil society on this phenomenon. Results. The results of the work consist in the fact that the authors grouped and summarized the motivational attitudes of participants in the corporate volunteer movement, presented practical recommendations on the formation of a system for supporting corporate volunteering, and showed the relationship between the organization’s sustainable development and corporate volunteering. Practical implications. The practical significance of the study is that its conclusions and recommendations can be used in the organization of corporate volunteering in Russian companies.

  3. Development of an alpha scattering instrument for heavy element detection in surface materials. Final report

    International Nuclear Information System (INIS)

    Turkevich, A.L.; Economou, T.; Blume, E.; Anderson, W.

    1974-12-01

    The development and characteristics of a portable instrument for detecting and measuring the amounts of lead in painted surfaces are discussed. The instrument is based on the ones used with the alpha scattering experiment on the Surveyor lunar missions. The principles underlying the instrument are described. It is stated that the performance tests of the instrument were satisfactory. (auth)

  4. Assessing the Basic Traits Associated with Psychopathy: Development and Validation of the Elemental Psychopathy Assessment

    Science.gov (United States)

    Lynam, Donald R.; Gaughan, Eric T.; Miller, Joshua D.; Miller, Drew J.; Mullins-Sweatt, Stephanie; Widiger, Thomas A.

    2011-01-01

    A new self-report assessment of the basic traits of psychopathy was developed with a general trait model of personality (five-factor model [FFM]) as a framework. Scales were written to assess maladaptive variants of the 18 FFM traits that are robustly related to psychopathy across a variety of perspectives including empirical correlations, expert…

  5. Curriculum Elements of a Politically Liberal Education in a Developing Democracy

    Science.gov (United States)

    Çelik, Rasit

    2016-01-01

    A previous study has justified the idea that a politically liberal conception of formal education can be applied in a developing democracy if such a society has reached a narrow overlapping consensus on its education system or modifies its education system from a minimally coercive perspective. This study further considers the fundamental question…

  6. Elements of the LaTeX system for the development of large publications

    DEFF Research Database (Denmark)

    Andersen, Esben Sloth

    This document presents gives a quick overview over the LATEX system from the viewpoint of the production of books and complex papers. Thereby it provides the starting point for the author's selection of a set of LATEX packages and the development of related commands....

  7. Second meeting of the ITER Preparatory Committee

    International Nuclear Information System (INIS)

    Drew, M.

    2003-01-01

    The committee charged to oversee the ITER ITA (ITER transitional arrangements) the ITER preparatory committee, held its second meeting on 24 September at the JET facilities at Culham, UK. Dr. Umberto Finzi of the European Commission was chairman. This meeting was also the first since the succession by Dr. Yasuo Shimomura to Dr. Robert Aymar as Interim Project Leader (IPL). Welcoming Dr. Shimomura in his new capacity, the Committee paid tribute to the outstanding contributions of his predecessor to the definition, design and promotion of ITER, and expressed the gratitude of all Participants to Dr. Aymar and its best wishes for future success in his new appointment.The technical activities of the ITA were the main focus of the Committee's discussions. The Committee took note of the IPL's Status Report on ITA Technical Activities and endorsed the IPL's proposals for the top level structure of the International Team, including the designation of Dr. Pietro Barabaschi as Deputy to the IPL. The Committee took note of the IPL's proposals on Participants' contributions to the ITA and of the Participants' stated intentions and expectations in this regard. Several Delegations pointed out that access to necessary resources would depend strongly on progress made towards the Agreement. All Participants were invited, in the shared interests of the project, to respond constructively to the specific technical areas where the IPL reported a lack of resources. Following a presentation from the IT on Project Management Tools, the Committee expressed support, in general, for the proposed strategy designed to provide the current team with the CAD and Data Management elements necessary to prepare for an efficient start of ITER construction, and asked the IT Leader to report on an estimate and time profile of expenditure during the period to mid-2004. The Committee supported the proposals to re-establish the ITER Test Blanket Working. The Committee agreed that the phasing of planned

  8. Selected element contents formation in linseed plants (Linum usitatissimum L. depending on the phase of development and plant part

    Directory of Open Access Journals (Sweden)

    Tadeusz Zając

    2013-12-01

    Full Text Available A single factor (variety strict field experiment was carried out in 1999-2000 at the experimental station of the Department of Plant Production, Agricultural University of Krakow located at Prusy near Cracow to study the changes in selected macro-and microelement concentrations in the top parts of linseed and the uptake of these elements during vegetation at the characteristic phases of development, including also the plant parts, i.e. leaves, stems, seeds and straw. On the basis of obtained results it was demonstrated that microelement contents in the linseed top parts changed considerably with the plant growth. The levels of Cr, Zn,Cd, Fe and Mn were highest at budding, while Cr, Pb, Fe and Mn levels were lowest at full maturity phase. Linseed grown in the area unpolluted with trace elements did not reveal the ability to accumulate excessive amounts of Cr, Zn, Pb, Cu, Ni, Fe and Mn, undesired from the usefulness for consumption point of view. Cadmium, irrespective of the examined stage of plant development, revealed high capacity for an excessive accumulation in the top parts. The contents and reciprocal ratios of macroelements in plants changed variously with their growth. The highest Na and K contents were noticed at budding phase, Ca at vegetative stage (arborescent and Mg at the initial budding. The widest Ca:P ratio and K:(Ca+Mg ratio occurred at budding, whereas K:Na ratio at full maturity phase. Linseed accumulated macro- and microele ments in the yield at various rates. Among the analysed elements Cd, Zn and Ni were taken up proportionally to increasing yields of linseed top part biomass.

  9. Science & Technology, Development and Local Power: Elements for Analysis of the Brazilian Context

    Directory of Open Access Journals (Sweden)

    Sueli Goulart

    2007-03-01

    Full Text Available This paper discusses the theoretical aspects of the relationship between scientific and technological production of universities and local development. The central argument is that this relationship is potentialized when produced knowledge permits the occupation of a position in the scientific field and is linked to specific forms of local insertion. In the context of globalization, which keeps the center-periphery structure of the world economic system practically intact, articulation is proposed between global and local dimensions of the environment. The recovery of theoretical-empirical categories formulated by Economic Commission for Latin-America and the Caribbean helps to place the discussion in a political sphere, and to characterize local development as an expression of social change on territorially demarcated scales.

  10. Wine routes as an element of the regional development of borderline regions

    Directory of Open Access Journals (Sweden)

    Vladimir Drozg

    1993-12-01

    Full Text Available The article examines the role of winw routes in promoting the development of wine-growing regions. It focuses both on the criteria for tracing wine routes (landscape value of a region, distribution of tourist supply settlements and events, natural and cultural monuments, existing road netivorks and transport accessibility, supplemenlary activities along the wine routes and on the impact that wine exert on the landscape/region (an increased income of individual households, better infrastructure equipment, recuttivation ol desert land lots, decreasing depopulalion and development of supplementary activities. The wine route through the Svečinske gorice region is presented as an example of countryside regulation.

  11. Development and testing of CFC-copper high heat flux elements

    International Nuclear Information System (INIS)

    Mitteau, R.; Chappuis, P.; Deschamps, P.; Schlosser, J.; Viallet, H.; Vieider, G.

    1994-01-01

    In the frame of high heat flux development for plasma facing components, CEA has designed, fabricated and tested over twenty specimens, with some of them for the NET divertor application. Several Carbon Fibre Composites (CFC) and copper grades have been used with flat tile or macro bloc configuration. All the mock-ups were tested in the electron beam facility EB200, for steady-state flux and fatigue up to 1000 cycles. The best four are presented. (author) 3 refs.; 11 figs

  12. Improvements in or relating to a method of exposing and developing a photographic element

    International Nuclear Information System (INIS)

    Loprest, F.J.

    1981-01-01

    This patent specification claims on behalf of Gaf Corporation, Delaware, U.S.A., a method of exposing and developing a composite photographic reproduction material for use in industrial and medical radiography. The material carries an X-ray-sensitive silver halide emulsion with a considerably reduced amount of silver halide, in combination with a second light sensitive layer containing a light-sensitive composition selected from diazotype compositions which form azo dyes, vesicular compositions and photosensitive polymers. (U.K.)

  13. Development of analytical techniques for determining rare earth elements in geological materials

    International Nuclear Information System (INIS)

    Moraes, Noemia M.P. de; Kakazu, M.H.; Iyer, S.S.

    1987-01-01

    This work presents a comparative study between instrumental neutron activation analysis, inductively coupled plasma emission spectrometry and mass spectrometric isotope dilution techniques. Some advantages and disadvantages of the techniques are presented, depending on the type of the analysis required. Emphasis in give upon mass spectrometric isotope dilution, and some procedures for the development of this technique are presented. This methodology is being established by the nuclear and isotopic geology group of the IPEN. (author) [pt

  14. Recent developments concerning French fuel elements used in natural uranium - graphite - CO{sub 2} reactor systems; Developpements recents des elements combustibles francais de la filiere uranium naturel - graphite - CO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Salesse, M; Stohr, J A; Jeanpierre, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    The policy followed in France for the development of fuel elements for reactors belonging to the Electricite de France has been to benefit as much as possible, for each new pile from the most recent technical progress by developing in each case a fuel element allowing the maximum power per channel. The two latest fuel elements thus studied by the French Atomic Energy Commission are of two different types: a tubular uranium element closed at both ends and cooled externally. (This type of element, chosen for the reactors EDF 2, EDF 3 and EDF 4 makes it possible to attain maximum specific powers of the order of 6 MW/metric ton.); an open tubular uranium element cooled both internally and externally, called an annular element which in being studied as a possibility for EDF 5. Such an element makes it possible to attain specific powers of over 12 MW/metric ton. The two types of element have the following common characteristics: - the can, for external cooling, has herning-bone type fins. This type of profile which has been vastly improved recently thereby increasing its thermal efficiency, has the important advantage of avoiding vibration of the element, but has posed problems of resistance to thermal cycling necessitating much research. - the fuel rods are placed inside graphite jackets, this limiting the vertical forces to which they are subjected and protecting them during charging and discharging. On the other hand, these elements present very different problems as for as the following points are concerned: - the characteristics required of the uranium tubes apart of course from a good dimensional stability during irradiation in the two cases are in the case of the closed tubes a very high resistance to external pressure, and in the case of the annular elements a low neutron absorption. Thus for each of these two cases it has been necessary to develop a suitable type of alloy. - a possible loosening of the can during thermal cycling, which is peculiar to the

  15. Strengthening the career development of clinical translational scientist trainees: a consensus statement of the Clinical Translational Science Award (CTSA) Research Education and Career Development Committees.

    Science.gov (United States)

    Meyers, Frederick J; Begg, Melissa D; Fleming, Michael; Merchant, Carol

    2012-04-01

    The challenges for scholars committed to successful careers in clinical and translational science are increasingly well recognized. The Education and Career Development (EdCD) of the national Clinical and Translational Science Award consortium gathered thought leaders to propose sustainable solutions and an agenda for future studies that would strengthen the infrastructure across the spectrum of pre- and postdoctoral, MD and PhD, scholars. Six consensus statements were prepared that include: (1) the requirement for career development of a qualitatively different investigator; (2) the implications of interdisciplinary science for career advancement including institutional promotion and tenure actions that were developed for discipline-specific accomplishments; (3) the need for long-term commitment of institutions to scholars; (4) discipline-specific curricula are still required but curricula designed to promote team work and interdisciplinary training will promote innovation; (5) PhD trainees have many pathways to career satisfaction and success; and (6) a centralized infrastructure to enhance and reward mentoring is required. Several themes cut across all of the recommendations including team science, innovation, and sustained institutional commitment. Implied themes include an effective and diverse job force and the requirement for a well-crafted public policy that supports continued investments in science education. © 2012 Wiley Periodicals, Inc.

  16. Standing Concertation Committee

    CERN Document Server

    HR Department

    2009-01-01

    Main points examined at the meeting of 24 June 2009 Results of the 2009 MARS exercise The Committee took note of the results of the 2009 MARS exercise presented by the Head of the HR Department, expressing satisfaction for the early availability of the statistics and for the fact that the analysis of the results covered the last three years. Status report on the work on the five-yearly review The Committee took note of a presentation by P. Gildemyn on the data collection procedure for the 2010 five-yearly review (staff, fellows, associate members of the personnel, CHIS) and of the proposed work schedule. Implications for employment conditions of the discussions at the Finance Committee and Council on 17 and 18 June 2009 The Chairman briefly reported on the discussions at the meetings of the Finance Committee and Council in June 2009, on the 2010-2014 medium-term plan and the 2010 preliminary draft budget, as well as on the modified strategy and goals for 2009. The Committee ...

  17. 78 FR 28602 - Merchant Marine Personnel Advisory Committee: Intercessional Meeting

    Science.gov (United States)

    2013-05-15

    ... Committee (MERPAC) will meet to work on Task Statement 83, entitled ``Development of competency requirements..., qualifications, certification, documentation, and fitness standards. The Committee will advise, consult with, and... the June 11, 2013, working group meeting is as follows: (1) Develop competency requirements to meet...

  18. 76 FR 81009 - Aviation Rulemaking Advisory Committee-New Task

    Science.gov (United States)

    2011-12-27

    ... Committee--New Task AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of new task... Rulemaking Advisory Committee (ARAC) a new task to develop a comprehensive program of voluntary accreditation... maintenance program (CAMP). This task addresses, in part, the ARAC recommendation developed by the Commercial...

  19. Children's exposure to harmful elements in toys and low-cost jewelry: Characterizing risks and developing a comprehensive approach

    International Nuclear Information System (INIS)

    Guney, Mert; Zagury, Gerald J.

    2014-01-01

    Highlights: • Risk for children up to 3 years-old was characterized considering oral exposure. • Saliva mobilization, ingestion of parts and of scraped-off material were considered. • Ingestion of parts caused hazard index (HI) values >>for Cd, Ni, and Pb exposure. • HI were lower (but > for saliva mobilization and 1, up to 75, 5.8, and 43, respectively). HI for ingestion of scraped-off material scenario was always 1 in three samples (two for Cd, one for Ni). Risk characterization identified different potentially hazardous items compared to United States, Canadian, and European Union approaches. A comprehensive approach was also developed to deal with complexity and drawbacks caused by various toy/jewelry definitions, test methods, exposure scenarios, and elements considered in different regulatory approaches. It includes bioaccessible limits for eight priority elements (As, Cd, Cr, Cu, Hg, Ni, Pb, and Sb). Research is recommended on metals bioaccessibility determination in toys/jewelry, in vitro bioaccessibility test development, estimation of material ingestion rates and frequency, presence of hexavalent Cr and organic Sn, and assessment of prolonged exposure to MJ

  20. Children's exposure to harmful elements in toys and low-cost jewelry: characterizing risks and developing a comprehensive approach.

    Science.gov (United States)

    Guney, Mert; Zagury, Gerald J

    2014-04-30

    Contamination problem in jewelry and toys and children's exposure possibility have been previously demonstrated. For this study, risk from oral exposure has been characterized for highly contaminated metallic toys and jewelry ((MJ), n=16) considering three scenarios. Total and bioaccessible concentrations of Cd, Cu, Ni, and Pb were high in selected MJ. First scenario (ingestion of parts or pieces) caused unacceptable risk for eight items for Cd, Ni, and/or Pb (hazard index (HI)>1, up to 75, 5.8, and 43, respectively). HI for ingestion of scraped-off material scenario was always 1 in three samples (two for Cd, one for Ni). Risk characterization identified different potentially hazardous items compared to United States, Canadian, and European Union approaches. A comprehensive approach was also developed to deal with complexity and drawbacks caused by various toy/jewelry definitions, test methods, exposure scenarios, and elements considered in different regulatory approaches. It includes bioaccessible limits for eight priority elements (As, Cd, Cr, Cu, Hg, Ni, Pb, and Sb). Research is recommended on metals bioaccessibility determination in toys/jewelry, in vitro bioaccessibility test development, estimation of material ingestion rates and frequency, presence of hexavalent Cr and organic Sn, and assessment of prolonged exposure to MJ. Copyright © 2014 Elsevier B.V. All rights reserved.

  1. Development of a coupled lattice Boltzmann and finite element method for fluid-structure interaction problems

    International Nuclear Information System (INIS)

    Jo, Jong Chull; Roh, Kyung Wan; Jhung, Myung Jo

    2006-12-01

    During this work period, a preliminary research has been conducted in the three different and related areas as stated in the proposal: literature survey, preliminary feasibility study of LBM and FEM coupling for FSI problems, and benchmark problems. As far as the literature review was concerned, approximately one hundred articles were found for the LBM techniques and critical review has been performed. The reviewed articles were classified into several topics that are useful for a subsequent development of the proposed computer program. Those topics included immiscible multicomponent flows, flow with energy transport, coupled multi-physics applications, application of the boundary conditions, irregular lattices, and turbulence. Furthermore, some fundamental review of the LBM was also included in this report. Secondly, a description of the LBM and FEM coupling program, which has been developed so far, was described here along with some demonstration examples. The preliminary study showed a great potential of the proposed technique for FSI application. A sample computer program list is also attached as Appendix A. As a future benchmark study, a set of test cases were proposed so that experimental data would be obtained in the next phase of the study. These data would be beneficial to understand the fundamental physics of the FSI nature under different basic conditions, and also provide benchmark results against which the developed program at a later stage could be validated. Finally, the future research direction as the extension of the present work is provided with emphasis on its goal, as well as merits and benefits resulting from the proposed research for the regulatory evaluation activities of KINS and the associated technical activities of industries such as design, manufacturing, fabrication, operation and maintenance

  2. Development of Shear Deformable Laminated Shell Element and Its Application to ANCF Tire Model

    Science.gov (United States)

    2015-04-24

    Sharp, R. S. and Crocombe, A. D., 2012, "Normal and Shear Forces in the Contact Patch of a Braked Racing Tyre . Part 2: Development of a Physical Tyre ...The University of Iowa 2312 Seamans Center Iowa City, IA 52242 Paramsothy Jayakumar US Army TARDEC 6501 E. 11 Mile Road Warren, MI 48397-5000...PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) US Army RDECOM-TARDEC,6501 E. 11 Mile Road

  3. G-quadruplexes as novel cis-elements controlling transcription during embryonic development.

    Science.gov (United States)

    David, Aldana P; Margarit, Ezequiel; Domizi, Pablo; Banchio, Claudia; Armas, Pablo; Calcaterra, Nora B

    2016-05-19

    G-quadruplexes are dynamic structures folded in G-rich single-stranded DNA regions. These structures have been recognized as a potential nucleic acid based mechanism for regulating multiple cellular processes such as replication, transcription and genomic maintenance. So far, their transcriptional role in vivo during vertebrate embryonic development has not yet been addressed. Here, we performed an in silico search to find conserved putative G-quadruplex sequences (PQSs) within proximal promoter regions of human, mouse and zebrafish developmental genes. Among the PQSs able to fold in vitro as G-quadruplex, those present in nog3, col2a1 and fzd5 promoters were selected for further studies. In cellulo studies revealed that the selected G-quadruplexes affected the transcription of luciferase controlled by the SV40 nonrelated promoter. G-quadruplex disruption in vivo by microinjection in zebrafish embryos of either small ligands or DNA oligonucleotides complementary to the selected PQSs resulted in lower transcription of the targeted genes. Moreover, zebrafish embryos and larvae phenotypes caused by the presence of complementary oligonucleotides fully resembled those ones reported for nog3, col2a1 and fzd5 morphants. To our knowledge, this is the first work revealing in vivo the role of conserved G-quadruplexes in the embryonic development, one of the most regulated processes of the vertebrates biology. © The Author(s) 2016. Published by Oxford University Press on behalf of Nucleic Acids Research.

  4. Solution of multi-element LED light sources development automation problem

    Science.gov (United States)

    Chertov, Aleksandr N.; Gorbunova, Elena V.; Korotaev, Valery V.; Peretyagin, Vladimir S.

    2014-09-01

    The intensive development of LED technologies resulted in the creation of multicomponent light sources in the form of controlled illumination devices based on usage of mentioned LED technologies. These light sources are used in different areas of production (for example, in the food industry for sorting products or in the textile industry for quality control, etc.). The use of LED lighting products in the devices used in specialized lighting, became possible due to wide range of colors of light, LED structures (which determines the direction of radiation, the spatial distribution and intensity of the radiation, electrical, heat, power and other characteristics), and of course, the possibility of obtaining any shade in a wide dynamic range of brightness values. LED-based lighting devices are notable for the diversity of parameters and characteristics, such as color radiation, location and number of emitters, etc. Although LED technologies have several advantages, however, they require more attention if you need to ensure a certain character of illumination distribution and/or distribution of the color picture at a predetermined distance (for example, at flat surface, work zone, area of analysis or observation). This paper presents software designed for the development of the multicomponent LED light sources. The possibility of obtaining the desired color and energy distribution at the zone of analysis by specifying the spatial parameters of the created multicomponent light source and using of real power, spectral and color parameters and characteristics of the LEDs is shown as well.

  5. Development of a database: DACTARI for a radio-toxic element ranking methodology

    International Nuclear Information System (INIS)

    Ansoborlo, E.; Santucci, C.; Grouiller, J.P.; Boucher, L.; Fluery-Herard, A.; Menetrier, F.; Comte, A.; Cook, E.; Moulin, V.

    2007-01-01

    Dosimetric impact studies aim at evaluating potential radiological effects of chronic or acute releases from nuclear facilities. A methodology for ranking radionuclides (RN) in terms of their health-related impact on the human population was first developed at CEA with specific criteria for each RN that could be applied to a variety of situations. It is based, in particular, on applying physico-chemical criteria to the complete RN inventory (present in the release or in the source term) and on applying norms related to radiation protection and chemical toxicology. The initial step consisted in identifying and collecting data necessary to apply the methodology, with reference to a previous database of long-lived radionuclides (LLRN, with half-lives ranging from 30 to 10 14 y) containing 95 radionuclides. The initial results have allowed us to identify missing data and revealed the need to complete the study for both toxic and radio-toxic aspects. This led us to the next step, developing a specific database, Database for Chemical Toxicity and Radiotoxicity Assessment of RadIonuclides (DACTARI), to collect data on chemical toxicity and radiotoxicity, including acute or chronic toxicity, the chemical form of the compounds, the contamination route (ingestion, inhalation), lethal doses, target organs, intestinal and maternal-foetal transfer, drinking water guidelines and the mutagenic and carcinogenic properties. (authors)

  6. Development of a finite-element-based design sensitivity analysis for buckling and postbuckling of composite plates

    Directory of Open Access Journals (Sweden)

    Guo Ruijiang

    1995-01-01

    Full Text Available A finite element based sensitivity analysis procedure is developed for buckling and postbuckling of composite plates. This procedure is based on the direct differentiation approach combined with the reference volume concept. Linear elastic material model and nonlinear geometric relations are used. The sensitivity analysis technique results in a set of linear algebraic equations which are easy to solve. The procedure developed provides the sensitivity derivatives directly from the current load and responses by solving the set of linear equations. Numerical results are presented and are compared with those obtained using finite difference technique. The results show good agreement except at points near critical buckling load where discontinuities occur. The procedure is very efficient computationally.

  7. Elements of spatial data quality as information technology support for sustainable development planning

    Directory of Open Access Journals (Sweden)

    Joksić Dušan

    2004-01-01

    Full Text Available We are witnessing nowadays that the last decade of the past century, as well as the first years of the present one, have brought technology expansion with respect to spatial data gathering and processing which makes a physical basis for management of spatial development. This has resulted in enlargement of the spatial data market. New technologies, presented in computer applications, have greatly expanded the number of users of these products. The philosophy of spatial data collecting has changed; analogue maps and plans printed on paper have been replaced by digital data bases which enable their presentation in a way that is the best for a particular user. Further, digital spatial data bases provide the possibility of their further upgrading by users. The two aspects, with respect to circumstances mentioned above, are very important in the process of data bases production and distribution. Firstly, the users of these data bases should be the ones who decide which of the available bases could satisfy their requirements, or in other words, what is the data quality level necessary for a certain application. On the other hand, the visualization of digital data bases could often mislead, since review of data bases could present data with better accuracy then the actual one. Thus, certain methods that would point to a quality of the selected data in the process of their analysis should be available to users. Specific, already adopted international standards, or specially developed procedures and methodologies, so called de facto standards, could be used in this data processing, enabling the estimation of these data quality. The development of Open GIS concept requires the adoption of widely accepted standards for spatial data quality. It is recommended that ISO standards should be accepted, firstly TC211 standards which are related to geographic information and geomatics. The realization of projects on ISO standards should be finished by 2006, so

  8. Development of a large-solid-angle and multi-device detection system for elemental analysis

    International Nuclear Information System (INIS)

    Satoh, T.; Ishii, K.; Kamiya, T.; Sakai, T.; Oikawa, M.; Arakawa, K.; Matsuyama, S.; Yamazaki, H.

    2003-01-01

    A new detection apparatus for both low energy X-rays like 1 keV and back scattered protons of MeV energy was developed. The detection apparatus consists of a large-solid-angle multi-device Si detector and a data acquisition system. The detector has 45 detection devices which are arranged in the shape of a pentagonal pyramid and fully cover a sample. A micro-beam irradiates the sample through the center of the pentagonal pyramid and X-rays emitted from the sample are detected in a solid angle of about 1.0 sr. This novel detection setup has about five times higher sensitivity than a conventional micro-PIXE camera. In addition, not only X-rays but back scattered protons can be detected, since the counting rate of back scattered protons per detection device is small despite lack of a passive absorber

  9. Territorial Marketing as an Element Boosting the Development of a Commune

    Directory of Open Access Journals (Sweden)

    Renigier-Biłozor Małgorzata

    2015-06-01

    Full Text Available Recently, it has become popular to streamline the way of managing territorial units by adapting the marketing approach to a territorial dimension. The majority of cities and communes in Poland have realized that, in order to achieve their set goals under conditions of fierce competition for limited resources, it is necessary to introduce territorial marketing as one of the key and significant own tasks to be implemented. The objective of the article is to develop principles of the effective use and management of the area of a commune by carrying out suitable marketing projects, based on an analysis of the social, economic and geopolitical situation of the commune, with particular emphasis placed on location factors.

  10. Managerial competences as a strategic element in the decision-making of Real Estate Development

    Directory of Open Access Journals (Sweden)

    Alberto Fecchio

    2012-04-01

    Full Text Available A real estate plan works when is a part of a wider project which regards the society needs in a certain place. To know where to invest and the risk/performance profile, it is necessary to know the profit and loss profile of the building in the future, in addition to building costs. A correct real estate valuation does not exist if upstream a deep knowledge of real estate, financial, statistical, investors’ psychology (science or knowledge cycles, as well as an experience of years do not exist, which allows to acquire sensibility even towards unpredictable events. The dynamic real estate management is the necessary tool to increase the recurring revenue, the capital gain, to improve cash, decrease risks. The real estate manager, consisting in a team with integrated skills, with “on field” experience, with business logical knowledge, with roots on territory, able to share the business risk, with knowledge of public administrations’ procedures and complexity, is able to support the real estate investor in the development procedure. The evolution of the decision process must follow the trend that since 2009 has seen the overcoming of redevelopment projects compared to new building projects, with higher costs and complexity, but more sustainable from the environmental and space rationalization point of view. Redevelopment processes will be framed in complex territorial development projects, with guarantees of transparency of administrative processes and times, in order to attract international funds, that today are prevented to operate due to great uncertainty of the administrative process management in Italy.

  11. Information as a key-element for the development and dissemination of bioenergy in Austria

    International Nuclear Information System (INIS)

    Schmidt, J.

    1999-01-01

    As one of the renewable energy sources which have to be developed to replace of CO 2 -intensive energy technologies the utilization of bio-energy has a lot of advantages: it is CO 2 - neutral; it is not dependent on imports and improves security of supply; has enormous potential of job creation for rural areas, in small and medium size enterprises; has an enormous market potential; biomass is a by-product in many industrial processes and its using would solve also the waste problem; biomass is an infinite energy source. Predominant market of the biomass for Europe is that for low temperature heating. Being underestimated this market is not attractive for high tech development and research perhaps because of the difficulties for collecting statistical data. Technologies vary from low efficient logwood boilers to sophisticated district heating plants. The strategy of the European Commission, referring to the White Paper, proposes to install 1mill sophisticated biomass heating systems in Europe till 2003. The low temperature heating market will be the most important for future information programmes and projects. For launching of biomass technologies onto a market it is necessary to inform the customer about it and the way to get it. The distribution systems have to rely on multipurpose equipment i.g. for different kind of bio-fuel. The information has to target the advantages of bio-energy fuels compared to the competing carriers like natural gas and oil. These advantages define the market niche. The information strategies include establishing of national and international networks and collaboration with other renewable energy sources associations and with the agricultural sector. The information related projects of the Austrian Biomass Association include: issuing a magazine, information campaigns, conferences, issuing of teaching materials for schools, information brochures and training programmes for plumbers so to be key-agents in the dissemination of small

  12. Project in fiscal 1988 for research and development of basic technologies in next generation industries. Research and development of superconducting materials and superconducting elements (Achievement report on research and development of high-temperature superconducting elements); 1988 nendo koon chodendo soshi no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-03-01

    With an objective of engineering utilization of superconducting materials in the electronics field, research and development has been inaugurated on superconducting elements having new functions. This paper summarizes the achievements in fiscal 1988. In the research of a superconducting element technology, researches were inaugurated on the four themes of the electric field effect type and charge injection type elements in the proximity effect type tri-terminal element, and low energy electron type and high energy electron type elements in the superconduction base type tri-terminal element. In bonding superconductors with semiconductors, discussions were given on a method to form both conductors by controlling oxygen concentrations of oxides having the same composition, and a method to laminate the superconductors on the semiconductors under super-high vacuum atmosphere. In the research of a new functional element technology, researches were inaugurated on the two themes of a single electron tunneling type tri-terminal element and a local potential tunneling type tri-terminal element. In addition, works were performed on epitaxial growth of high-quality superconducting films as a common basic technology, and such an assignment has been made clear as the necessity of controlling the crystalline azimuth. (NEDO)

  13. 75 FR 27614 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-05-17

    ... Environment Protection Committee. --Consideration of the report of the Maritime Safety Committee... Session of the International Maritime Organization (IMO) Council to be held at the IMO headquarters in... HNS Convention. --World Maritime University: --IMO International Maritime Law Institute: --Protection...

  14. Release of Inorganic Elements during Wood Combustion. Release to the Gas Phase of Inorganic Elements during: Wood Combustion. Part 1: Development and Evaluation of Quantification Methods

    DEFF Research Database (Denmark)

    van Lith, Simone Cornelia; Alonso-Ramírez, Violeta; Jensen, Peter Arendt

    2006-01-01

    During wood combustion, inorganic elements such as alkali metals, sulfur, chlorine, and some heavy metals are partly released to the gas phase, which may cause problems in combustion facilities because of deposit formation and corrosion. Furthermore, it may cause harmful emissions of gases......) in this reactor, whereas methods B and C involved initial pyrolysis and combustion, respectively, of a large fuel sample (~5 kg) in a bench-scale fixed-bed reactor at 500 C. The methods were evaluated by comparing the data on the release of Cl, S, K, Na, Zn, and Pb from fiber board obtained by the three methods...

  15. Development of test apparatus for fission product release from overheated fuel element

    International Nuclear Information System (INIS)

    Takai, T.; Hirosawa, T.; Funabashi, H.; Miyahara, S.

    1996-01-01

    Evaluation of the source term released to environment under the accident conditions is important to the safety evaluation and design of reactor containment vessel. However, available data related to FBR source term are very limited, especially for the FPs release data from overheated FBR fuel. The present, source term evaluation of FBR is based on assumption from that of LWR. Though, this evaluation is very conservative. Evaluation large scale FBR source term using this method is result in extremely conservative and lead construction of large scale plant becomes doubtful from the viewpoints of cost and safety system. Though, it is necessary to evaluate source term from the realistic and rational scenario considering a characteristic of FBR. Preparation of FPs release experiment from irradiated fuel is going on to investigate the FPs release and transport and to develop the analysis code for in-vessel source term evaluation. Fabrication of this apparatus was started in 1992, and the installation was completed in 1994. This apparatus passed the facility inspection by Science and Technology Agency in March 1995. This apparatus consists of a high frequency induction furnace, thermal gradient tube (TGT), sintered metal filters, cold traps, gas-analyzer, γ-ray spectrometry system and so on. In the experiment, FPs release rate and behavior will be investigated using gamma-ray spectrogram and FP gas analysis. Physical and chemical composition of released FP would be investigated from FPs deposited profiles on TGT. Now, cold experiment using simulant FP materials are conducted. (author)

  16. [Management committees in health services: an empirical study].

    Science.gov (United States)

    Cecilio, Luiz Carlos de Oliveira

    2010-03-01

    The aim of the article, based on field data collected from a continuing education program for primary health clinic administrators, was to analyze the functioning of a health service management strategy called "management committees". Different meanings and operational modalities emerged in the committees. Various antimonies appeared in the way the committees operate (autonomy versus heteronomy, reproduction of "instituted" versus "instituting" processes, and communicative versus instrumental reasoning), thus reflecting the level of complexity in this management mechanism. Healthcare provision per se by the clinics only appeared occasionally on the committees' agenda, which mainly focused on administrative issues. The article suggests that further research is needed on the coordinator's involvement in the field of forces constituting the management committee, besides developing pedagogical strategies to support the clinic coordinators and health teams in building the committees. The primary data were submitted to an epistemological discussion anchored in the idea of double hermeneutics, multiple validation of research results, and the relationship between theory and practice.

  17. Elements of a Professional Development Seminar for First-Year Astronomy Graduate Students

    Science.gov (United States)

    Dinerstein, H. L.

    1999-12-01

    Students entering the astronomy Ph.D. program at the University of Texas at Austin take a seminar course which is designed to serve as an introduction and orientation both to the program and the department, and also to astronomy as a profession and a career. This seminar meets one hour per week, and has been taught in approximately the same format annually since 1994. While details of the syllabus vary from year to year, about half the sessions are devoted to information specific to our program, such as overviews of the research activities and facilities of the department and McDonald Observatory. The rest of the sessions address broader issues. They include discussions and (sometimes practice) of essential skills such as giving oral presentations, writing and peer-review of journal articles and proposals, and norms and practices of the profession. Another major focus, usually occupying three or four class sessions, is the current job market, prospects for employment, and various career paths for astronomers. National employment statistics are reviewed, as well as the employment experiences of recent graduates of our own program (Dinerstein 1996, BAAS, 28, 1277). Astronomers at various stages of their careers, and in various professional tracks, come and talk about their experiences; these guests include current post-doctoral fellows associated with the department, astronomers who have spent most of their careers on grant support (``soft money'' track) or in observatory support positions, and individuals with experience teaching at small or community colleges. The purpose of this seminar course is to ensure that graduate students become aware of their options early in their graduate careers, in order to avoid unrealistic expectations followed by unpleasant surprises later on, and to help them plan an optimum strategy for their own professional development. I also discuss how this course, originally tailored for one department, could be modified and adapted to other

  18. Eco-Education: A Required Element of Public Policies for Sustainable Social and Economic Development

    Directory of Open Access Journals (Sweden)

    Marţian Iovan

    2014-01-01

    Full Text Available In this article, the author analyzes eco-education from a transdisciplinary perspective, as part of the “new education”, referring to its current dimensions, its goals and its utility in shaping the attitudes and behaviors of contemporary humans towards their environment and towards sustainable living. The goals and content of eco-education are dependent on a new philosophy, on a new axiological and ethical orientation that is, opposed to rationalistic philosophy, which guided the age of machinism and industrialization. The new view regarding humans’ (anthroposphere relations with nature (biosphere and geosphere, is inspired from the fundamental rights of the human being, as part of nature, from universal values which harmonize sociosphere and biosphere, the ecological awareness of contemporary society with regard to the objective laws of nature, biodiversity conservation and environmental protection by juridical laws. These goals are meant for the entire population, especially children and young people, with the aid of schools and other educational factors (church, mass – media, cultural foundations, non-governmental organizations etc., an ecological awareness, positive feelings and attitudes with respect to the environment, skills, abilities and capacities for efficient action in the sense of protecting nature and conserving ecological circuits. The author lays an emphasis on the idea that ecological education, in all its forms, will not yield the results expected by experts and future generations if it is undertaken randomly, fragmentarily, incoherently – regardless of how diversified and quantitatively extended it might be. As a global issue of today’s society – the efficiency of eco-education is dependent on the philosophy of nature and life, materialized in a global strategy, such as that of durable and knowledge-based development, which will facilitate the harmonization of various public policies launched by contemporary

  19. Standard elements; Elements standards

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Following his own experience the author recalls the various advantages, especially in the laboratory, of having pre-fabricated vacuum-line components at his disposal. (author) [French] A la suite de sa propre experience, l'auteur veut rappeler les divers avantages que presente, tout particulierement en laboratoire, le fait d'avoir a sa disposition des elements pre-fabriques de canalisations a vide. (auteur)

  20. The work of committee 2 of ICRP on internal dosimetry

    International Nuclear Information System (INIS)

    Stather, J.W.

    2005-01-01

    Full text: Over the last few years the Task Group of Committee 2 of ICRP on Internal Dosimetry (INDOS), in conjunction with the Task Group on Dose Calculations (DOCAL), has prepared a series of publications that have given dose coefficients for intakes of radionuclides by infants, children and adults. The most recent publications have been Publication 88 that gives doses to the embryo, fetus and newborn child from intakes of radionuclides by the mother and Publication 94 that will give doses to the newborn child from intakes of radionuclides in mothers' milk. These documents have completed the programme of work of Committee 2 on dose coefficients for members of the public. The emphasis of work on internal dosimetry by Committee 2 is now concerned with occupational exposure. This is will take into account recent advice from ICRP, including the new 2005 Recommendations of ICRP which are expected to provide revised tissue weighting factors for the calculation of effective dose. In addition ICRP has issued Publication 89 on Basic Anatomical and Physiological Data for use in Radiological Protection and in addition will have published a new Human Alimentary Tract Model (HATM). It will have implemented a human phantom for dose calculations based upon medical imaging data and updated radionuclide decay data; superseding Publication 38. In addition, the systemic models for a number of elements are being revised to take account of more recent data, and the lung clearance characteristics of a wide range of compounds relevant to occupational exposure are being reviewed. It is intended to replace Publications 30 and 68 that give biokinetic data and dose coefficients for intakes of radionuclides and Publications 54 and 78 that give information for bioassay interpretation, with a single series of publications. This series will cover both dosimetry and data for bioassay interpretation. The first report will cover radionuclides of the 31 elements covered in the series of

  1. 78 FR 32698 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-31

    ... DEPARTMENT OF STATE [Public Notice 8340] Shipping Coordinating Committee; Notice of Committee... Technical Co-operation Committee --Protection of vital shipping lanes --Periodic review of administrative... of the Organization since the twenty-eighth regular session of the Assembly --External relations...

  2. 75 FR 43156 - Federal Advisory Committee; Missile Defense Advisory Committee

    Science.gov (United States)

    2010-07-23

    ... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Missile Defense Advisory Committee AGENCY: Missile Defense Agency (MDA), DoD. ACTION: Notice of closed meeting. SUMMARY: Under the... Defense announces that the Missile Defense Advisory Committee will meet on August 4 and 5, 2010, in...

  3. Development of the hierarchical domain decomposition boundary element method for solving the three-dimensional multiregion neutron diffusion equations

    International Nuclear Information System (INIS)

    Chiba, Gou; Tsuji, Masashi; Shimazu, Yoichiro

    2001-01-01

    A hierarchical domain decomposition boundary element method (HDD-BEM) that was developed to solve a two-dimensional neutron diffusion equation has been modified to deal with three-dimensional problems. In the HDD-BEM, the domain is decomposed into homogeneous regions. The boundary conditions on the common inner boundaries between decomposed regions and the neutron multiplication factor are initially assumed. With these assumptions, the neutron diffusion equations defined in decomposed homogeneous regions can be solved respectively by applying the boundary element method. This part corresponds to the 'lower level' calculations. At the 'higher level' calculations, the assumed values, the inner boundary conditions and the neutron multiplication factor, are modified so as to satisfy the continuity conditions for the neutron flux and the neutron currents on the inner boundaries. These procedures of the lower and higher levels are executed alternately and iteratively until the continuity conditions are satisfied within a convergence tolerance. With the hierarchical domain decomposition, it is possible to deal with problems composing a large number of regions, something that has been difficult with the conventional BEM. In this paper, it is showed that a three-dimensional problem even with 722 regions can be solved with a fine accuracy and an acceptable computation time. (author)

  4. Transforming Shell and Society Elements in Human Settlements for Sustainable Tourism Development: Setu Babakan, South Jakarta, Indonesia

    Science.gov (United States)

    Koncara, R. M. P.; Tiarasari, R.; Pratiwi, W. D.

    2018-05-01

    The government has established the settlements around Setu Babakan as Betawi Cultural Village (PBB). The goal of PBB Setu Babakan is to preserve Betawi culture which is fading, and realized by making the location as a tourism destination in South Jakarta. This paper discusses the transformation on the two ekistics elements in human settlements around Setu Babakan; shell and society in the development of tourism. Shell as a physical element is reflected in the citizen’s houses which are adapted into traditional Betawi houses. While the society refers to Setu Babakan’s citizen who participated as economic actors by selling traditional Betawi food and beverages, as well as a performers at the Betawi traditional art performances. In its application, the adaptation of citizen’s houses into traditional Betawi house cannot be done completely. The adaptation that can be done to the residents’ houses is by beautification in the appearance of the building. The application of typical Betawi ornaments makes the settlement feels like Betawi traditional village. This is one of the attractions for tourists. They can enjoy the atmosphere of Betawi village, enjoy Betawi food and beverages, watch Betawi art performance, and enjoy the lake tour at PBB Setu Babakan.

  5. Development of finite element models for the study of ageing effects in CANDU 6 concrete containment buildings

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y.; Jaffer, S., E-mail: Yuqing.Ding@cnl.ca [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada)

    2016-06-15

    In nuclear power plants (NPPs), concrete containment buildings (CCBs) provide the final physical barrier against the release of radioactive materials into the environment and protect the nuclear structures housed within the containment building. CCBs have to be maintained to ensure leak tightness and sound structural integrity for the safe operation throughout the life of NPPs. However, the integrity of CCBs may be affected by the ageing of its concrete, post-tensioning cables and reinforcing bars (rebars). Finite element models (FEMs) of CANDU 6 CCBs have been developed using 2 independent finite element programs for the study of the effect of ageing of CCBs. These FEMs have been validated using multiple-source data and have been used for preliminary analyses of the effect of thermal load and ageing degradation on the concrete structure. The modelling assumptions and simplifications, approach, and validation are discussed in this paper. The preliminary analyses for temperature effects and potential applications to the study of ageing degradation in CCBs using the FEMs are briefly introduced. (author)

  6. Constitutive modeling and finite element procedure development for stress analysis of prismatic high temperature gas cooled reactor graphite core components

    International Nuclear Information System (INIS)

    Mohanty, Subhasish; Majumdar, Saurindranath; Srinivasan, Makuteswara

    2013-01-01

    Highlights: • Finite element procedure developed for stress analysis of HTGR graphite component. • Realistic fluence profile and reflector brick shape considered for the simulation. • Also realistic H-451 grade material properties considered for simulation. • Typical outer reflector of a GT-MHR type reactor considered for numerical study. • Based on the simulation results replacement of graphite bricks can be scheduled. -- Abstract: High temperature gas cooled reactors, such as prismatic and pebble bed reactors, are increasingly becoming popular because of their inherent safety, high temperature process heat output, and high efficiency in nuclear power generation. In prismatic reactors, hexagonal graphite bricks are used as reflectors and fuel bricks. In the reactor environment, graphite bricks experience high temperature and neutron dose. This leads to dimensional changes (swelling and or shrinkage) of these bricks. Irradiation dimensional changes may affect the structural integrity of the individual bricks as well as of the overall core. The present paper presents a generic procedure for stress analysis of prismatic core graphite components using graphite reflector as an example. The procedure is demonstrated through commercially available ABAQUS finite element software using the option of user material subroutine (UMAT). This paper considers General Atomics Gas Turbine-Modular Helium Reactor (GT-MHR) as a bench mark design to perform the time integrated stress analysis of a typical reflector brick considering realistic geometry, flux distribution and realistic irradiation material properties of transversely isotropic H-451 grade graphite

  7. Large diameter femoral heads impose significant alterations on the strains developed on femoral component and bone: a finite element analysis.

    Science.gov (United States)

    Theodorou, E G; Provatidis, C G; Babis, G C; Georgiou, C S; Megas, P D

    2011-01-01

    Total Hip Arthroplasty aims at fully recreating a functional hip joint. Over the past years modular implant systems have become common practice and are widely used, due to the surgical options they provide. In addition Big Femoral Heads have also been implemented in the process, providing more flexibility for the surgeon. The current study aims at investigating the effects that femoral heads of bigger diameter may impose on the mechanical behavior of the bone-implant assembly. Using data acquired by Computed Tomographies and a Coordinate Measurement Machine, a cadaveric femur and a Profemur-E modular stem were fully digitized, leading to a three dimensional finite element model in ANSYS Workbench. Strains and stresses were then calculated, focusing on areas of clinical interest, based on Gruen zones: the calcar and the corresponding below the greater trochanter area in the proximal femur, the stem tip region and a profile line along linea aspera. The performed finite elements analysis revealed that the use of large diameter heads produces significant changes in strain development within the bone volume, especially in the lateral side. The application of Frost's law in bone remodeling, validated the hypothesis that for all diameters normal bone growth occurs. However, in the calcar area lower strain values were recorded, when comparing with the reference model featuring a 28mm femoral head. Along line aspera and for the stem tip area, higher values were recorded. Finally, stresses calculated on the modular neck revealed increased values, but without reaching the yield strength of the titanium alloy used.

  8. Constitutive modeling and finite element procedure development for stress analysis of prismatic high temperature gas cooled reactor graphite core components

    Energy Technology Data Exchange (ETDEWEB)

    Mohanty, Subhasish, E-mail: smohanty@anl.gov [Argonne National Laboratory, South Cass Avenue, Argonne, IL 60439 (United States); Majumdar, Saurindranath [Argonne National Laboratory, South Cass Avenue, Argonne, IL 60439 (United States); Srinivasan, Makuteswara [U.S. Nuclear Regulatory Commission, Washington, DC 20555 (United States)

    2013-07-15

    Highlights: • Finite element procedure developed for stress analysis of HTGR graphite component. • Realistic fluence profile and reflector brick shape considered for the simulation. • Also realistic H-451 grade material properties considered for simulation. • Typical outer reflector of a GT-MHR type reactor considered for numerical study. • Based on the simulation results replacement of graphite bricks can be scheduled. -- Abstract: High temperature gas cooled reactors, such as prismatic and pebble bed reactors, are increasingly becoming popular because of their inherent safety, high temperature process heat output, and high efficiency in nuclear power generation. In prismatic reactors, hexagonal graphite bricks are used as reflectors and fuel bricks. In the reactor environment, graphite bricks experience high temperature and neutron dose. This leads to dimensional changes (swelling and or shrinkage) of these bricks. Irradiation dimensional changes may affect the structural integrity of the individual bricks as well as of the overall core. The present paper presents a generic procedure for stress analysis of prismatic core graphite components using graphite reflector as an example. The procedure is demonstrated through commercially available ABAQUS finite element software using the option of user material subroutine (UMAT). This paper considers General Atomics Gas Turbine-Modular Helium Reactor (GT-MHR) as a bench mark design to perform the time integrated stress analysis of a typical reflector brick considering realistic geometry, flux distribution and realistic irradiation material properties of transversely isotropic H-451 grade graphite.

  9. Development of a finite element code to solve thermo-hydro-mechanical coupling and simulate induced seismicity.

    Science.gov (United States)

    María Gómez Castro, Berta; De Simone, Silvia; Rossi, Riccardo; Larese De Tetto, Antonia; Carrera Ramírez, Jesús

    2015-04-01

    Coupled thermo-hydro-mechanical modeling is essential for CO2 storage because of (1) large amounts of CO2 will be injected, which will cause large pressure buildups and might compromise the mechanical stability of the caprock seal, (2) the most efficient technique to inject CO2 is the cold injection, which induces thermal stress changes in the reservoir and seal. These stress variations can cause mechanical failure in the caprock and can also trigger induced earthquakes. To properly assess these effects, numerical models that take into account the short and long-term thermo-hydro-mechanical coupling are an important tool. For this purpose, there is a growing need of codes that couple these processes efficiently and accurately. This work involves the development of an open-source, finite element code written in C ++ for correctly modeling the effects of thermo-hydro-mechanical coupling in the field of CO2 storage and in others fields related to these processes (geothermal energy systems, fracking, nuclear waste disposal, etc.), and capable to simulate induced seismicity. In order to be able to simulate earthquakes, a new lower dimensional interface element will be implemented in the code to represent preexisting fractures, where pressure continuity will be imposed across the fractures.

  10. Development and Evaluation of a Parenting Resilience Elements Questionnaire (PREQ) Measuring Resiliency in Rearing Children with Developmental Disorders

    Science.gov (United States)

    Suzuki, Kota; Kobayashi, Tomoka; Moriyama, Karin; Kaga, Makiko; Hiratani, Michio; Watanabe, Kyota; Yamashita, Yushiro; Inagaki, Masumi

    2015-01-01

    We developed a parenting resilience elements questionnaire (PREQ) measuring the degree to which mothers possess elements that aid in adapting to challenges and difficulties related to children with developmental disorders (DD). A total of 424 parents of children with DD were recruited from five medical institutes. Psychometric properties of PREQ were evaluated using data of 363 mothers of children with DD. Furthermore, multiple regression analysis was performed, predicting depressive symptoms and parenting behavior with PREQ subscales, a general health questionnaire, and the total difficulties score of a strength and difficulties questionnaire. Factor analysis revealed three reliable factors: “knowledge of the child’s characteristics,” “perceived social supports,” and “positive perceptions of parenting.” Moreover, multiple regression analysis showed that “knowledge of the child’s characteristics” was associated with parenting behavior, whereas “perceived social supports” predicted depressive symptoms; “positive perceptions of parenting” influenced both parenting behavior and depressive symptoms. These findings indicated that the PREQ may be used as a scale measuring resiliency in mothers of children with DD and is useful for evaluating their parenting ability in clinical interventions. PMID:26633810

  11. Development and Evaluation of a Parenting Resilience Elements Questionnaire (PREQ Measuring Resiliency in Rearing Children with Developmental Disorders.

    Directory of Open Access Journals (Sweden)

    Kota Suzuki

    Full Text Available We developed a parenting resilience elements questionnaire (PREQ measuring the degree to which mothers possess elements that aid in adapting to challenges and difficulties related to children with developmental disorders (DD. A total of 424 parents of children with DD were recruited from five medical institutes. Psychometric properties of PREQ were evaluated using data of 363 mothers of children with DD. Furthermore, multiple regression analysis was performed, predicting depressive symptoms and parenting behavior with PREQ subscales, a general health questionnaire, and the total difficulties score of a strength and difficulties questionnaire. Factor analysis revealed three reliable factors: "knowledge of the child's characteristics," "perceived social supports," and "positive perceptions of parenting." Moreover, multiple regression analysis showed that "knowledge of the child's characteristics" was associated with parenting behavior, whereas "perceived social supports" predicted depressive symptoms; "positive perceptions of parenting" influenced both parenting behavior and depressive symptoms. These findings indicated that the PREQ may be used as a scale measuring resiliency in mothers of children with DD and is useful for evaluating their parenting ability in clinical interventions.

  12. Do ethics committees need a legal framework?

    Science.gov (United States)

    Byk, Christian

    2007-01-01

    The question "do ethics committees need a legal framework" may then raise fundamental discussion in the case of developing countries: will an ethical framework bring them a better capacity to assume their task? And what should this task be if we consider the particularities of clinical research conducted in developing countries?

  13. High-Uranium-Loaded U3O8-Al fuel element development program. Part 2

    International Nuclear Information System (INIS)

    Knight, R.

    1993-01-01

    Texas Instruments is a product intensive company that manufactures very high volumes of different products, and because of this, their technique in manufacturing is what we call hard tooling. So all of the tools we use at this site whether it is for HFIR, ORR or HFBR are hard tooling. A fuel plate never sees a lathe, milling machine, or any other tool of that nature. I have just a few viewgraphs here that will illustrate some of the types of tooling we use to keep away from machining and get high production at as low as possible cost. Figure I shows weighing aluminum powder. It's done in a glove box more to keep air flow away from the balance than any other reason. The weighing of the U 3 O 8 is similar and the glove box is for personnel protection. Figure 2 shows our blender, and I won't try to explain why it works. This is the only one we have ever found that really blends our powder and does a good job. Figure 3 shows our powder die on the press, and you can see the rectangular compact being extracted. Here is the way we make our frames in a blanking die Figure 4. You will notice there are two holes in the frame. We start off with two cores in a frame. Our lot size is 24, but twelve billets go into the furnace for preheating, at the seventh pass, we cut the two cores apart and at that point they become individual fuel plates. Figure 5 shows the loading of the compacts into the frame. We use a loose fit. We can just drop the cores into the frame with, I think, about 2 mils side clearance and it works very satisfactorily. Figure 6 shows a forming die. Once you make the investment for the fuel plate blanking die shown in Figure 7, you can blank out a fuel plate on the order of about one per minute, to size and to the tolerances required. Figure 8 shows a unique tool developed at Oak Ridge. It's a Homogeneity Scanner. It works on the principal of x-ray attenuation going through an electronic analysis

  14. Development of severe accident analysis code - Development of a finite element code for lower head failure analysis

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Hoon; Lee, Choong Ho; Choi, Tae Hoon; Kim, Hyun Sup; Kim, Se Ho; Kang, Woo Jong; Seo, Chong Kwan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-08-01

    The study concerns the development of analysis models and computer codes for lower head failure analysis when a severe accident occurs in a nuclear reactor system. Although the lower head failure modes consists of several failure modes, the study this year was focused on the global rupture with the collapse pressure and mode by limit analysis and elastic deformation. The behavior of molten core causes elevation of temperature in the reactor vessel wall and deterioration of load-carrying capacity of a reactor vessel. The behavior of molten core and the heat transfer modes were, therefore, postulated in several types and the temperature distributions according to the assumed heat flux modes were calculated. The collapse pressure of a nuclear reactor lower head decreases rapidly with elevation of temperature as time passes. The calculation shows the safety of a nuclear reactor is enhanced with the lager collapse pressure when the hot spot is located far from the pole. 42 refs., 2 tabs., 31 figs. (author)

  15. 75 FR 10267 - Federal Open Market Committee; Domestic Policy Directive of January 26 and 27, 2010

    Science.gov (United States)

    2010-03-05

    ... the Federal Reserve's balance sheet to expand significantly in coming months. The Committee directs... developments regarding the System's balance sheet that could affect the attainment over time of the Committee's...

  16. Development of systematic evaluation method on nonlinear behavior of the constructions using repeated finite element method analysis

    International Nuclear Information System (INIS)

    Kasahara, Naoto

    1997-01-01

    Supposing that the nuclear reactor stops on any reason, the temperature of flown out coolant from the reactor core will decrease and the temperature of elements touched with the coolant in the nuclear plant equipments also decreases on response to this. On the other hand, temperature pursuit at non-touched portions is delayed to form a thermal stress due to their temperature difference. In particular, a stress over its yield value at discontinuous portion of structure due to stress concentration generates, which could be thought of possibility to form a creep fatigue crack if repeating such thermal stress under high temperature. The Power Reactor and Nuclear Fuel Development Corporation has developed the transient thermal stress real time simulation code for calculating thermal stress formed within a construction in accompany with temperature changes of the coolant once and at high speed since 1994 FY, and after 1995 FY the development of FEM simulation technique from macroscopic region to microscopic region which set an objective regions from construction level to material texture has been promoted. In future, development of total simulation technique connected both and optimum design technique due to its results will be planned. (G.K.)

  17. 75 FR 62399 - Office of the National Coordinator for Health Information Technology; HIT Standards Committee...

    Science.gov (United States)

    2010-10-08

    ... Technology; HIT Standards Committee Schedule for the Assessment of HIT Policy Committee Recommendations.... SUMMARY: Section 3003(b)(3) of the American Recovery and Reinvestment Act of 2009 mandates that the HIT Standards Committee develop a schedule for the assessment of policy recommendations developed by the HIT...

  18. Expert Committee on College Libraries

    OpenAIRE

    Joy, V. P.; Raman Nair, R.; Ayub, M.

    1994-01-01

    Importance of library and information services in higher education was emphasized in India by many committees of Government of India from 1917 including Calcutta University Commission under Sir Michael Saddler, University Education Commission (1949) chaired by Dr. S. Radhakrishnan, Ranganathan Committee (1958), Education Commission (1966) chaired by D.S. Kothari, as well as Sen Committee, Mehrotra Committee etc of UGC. But as education being a State subject; union government could not go beyo...

  19. SENIOR STAFF ADVANCEMENT COMMITTEE (SSAC)

    CERN Document Server

    2000-01-01

    Composition and mandateThe Senior Staff Advancement Committee is composed of members nominated ad persona by the Director-General.The Committee examines proposals from Divisions concerning promotions to grade 13 in Career Path IX, changes of career path to Career Path IX and advancements to the exceptional grade in Career path VIII.The Director-General may consult the Committee on any matter related to senior staff careers.The Committee makes its recommendations to the Director-General.

  20. Development of a Finite Element Model of the Human Shoulder to Investigate the Mechanical Responses and Injuries in Side Impact

    Science.gov (United States)

    Iwamoto, Masami; Miki, Kazuo; Yang, King H.

    Previous studies in both fields of automotive safety and orthopedic surgery have hypothesized that immobilization of the shoulder caused by the shoulder injury could be related to multiple rib fractures, which are frequently life threatening. Therefore, for more effective occupant protection, it is important to understand the relationship between shoulder injury and multiple rib fractures in side impact. The purpose of this study is to develop a finite element model of the human shoulder in order to understand this relationship. The shoulder model included three bones (the humerus, scapula and clavicle) and major ligaments and muscles around the shoulder. The model also included approaches to represent bone fractures and joint dislocations. The relationships between shoulder injury and immobilization of the shoulder are discussed using model responses for lateral shoulder impact. It is also discussed how the injury can be related to multiple rib fractures.