The transition to electronic communications networks in the secondary treasury market

OpenAIRE

Bruce Mizrach; Christopher J. Neely

2006-01-01

This article reviews the history of the recent shift to electronic trading in equity, foreign exchange, and fixed-income markets. The authors analyze a new data set: the eSpeed electronic Treasury network. They contrast the market microstructure of the eSpeed trading platform with the traditional voice-assisted networks that report through GovPX. The electronic market (eSpeed) has greater volume, smaller spreads, and a lower estimated trade impact than the voice market (GovPX). ; Appeared ear...

Program For Local-Area-Network Electronic Mail

Science.gov (United States)

Weiner, Michael J.

1989-01-01

MailRoom is computer program for local-area network (LAN) electronic mail. Enables users of LAN to exchange electronically notes, letters, reminders, or any sort of communication via their computers. Links all users of LAN into communication circle in which messages created, sent, copied, printed, downloaded, uploaded, and deleted through series of menu-driven screens. Includes feature that enables users to determine whether messages sent have been read by receivers. Written in Microsoft QuickBasic.

MAILROOM- A LOCAL AREA NETWORK ELECTRONIC MAIL PROGRAM

Science.gov (United States)

Weiner, M. J.

1994-01-01

The Mailroom program is a Local Area Network (LAN) electronic mail program. It allows LAN users to electronically exchange notes, letters, reminders, or any sort of communication via their computer. The Mailroom program links all LAN users into a communication circle where messages can be created, sent, copied, printed, downloaded, uploaded, and deleted through a series of menu-driven screens. Mailroom includes a feature which allows users to determine if a message they have sent has been read by the receiver. Each user must be separately installed and removed from Mailroom as they join or leave the network. Mailroom comes with a program that accomplishes this with minimum of effort on the part of the Network Administrator/Manager. There is also a program that allows the Network Administrator/Manager to install Mailroom on each user's workstation so that on execution of Mailroom the user's station may be identified and the configurations settings activated. It will create its own configuration and data/supporting files during the setup and installation process. The Mailroom program is written in Microsoft QuickBasic. It was developed to run on networked IBM XT/ATs or compatibles and requires that all participating workstations share a common drive. It has been implemented under DOS 3.2 and has a memory requirement of 71K. Mailroom was developed in 1988.

Research on Electronic-nose Application Based on Wireless Sensor Networks

International Nuclear Information System (INIS)

Zhao, A; Wang, L; Yao, C H

2006-01-01

The paper proposed a structure of Wireless Sensor Networks based Electronic-nose system to monitors air quality in the building. In the study, the authors researched a data processing algorithm: fuzzy neural network based on RBF(Radial Basis Function) network model, to quantitatively analyze the gas ingredient and put forward a routing protocol for the system

Percolation on shopping and cashback electronic commerce networks

Science.gov (United States)

Fu, Tao; Chen, Yini; Qin, Zhen; Guo, Liping

2013-06-01

Many realistic networks live in the form of multiple networks, including interacting networks and interdependent networks. Here we study percolation properties of a special kind of interacting networks, namely Shopping and Cashback Electronic Commerce Networks (SCECNs). We investigate two actual SCECNs to extract their structural properties, and develop a mathematical framework based on generating functions for analyzing directed interacting networks. Then we derive the necessary and sufficient condition for the absence of the system-wide giant in- and out- component, and propose arithmetic to calculate the corresponding structural measures in the sub-critical and supercritical regimes. We apply our mathematical framework and arithmetic to those two actual SCECNs to observe its accuracy, and give some explanations on the discrepancies. We show those structural measures based on our mathematical framework and arithmetic are useful to appraise the status of SCECNs. We also find that the supercritical regime of the whole network is maintained mainly by hyperlinks between different kinds of websites, while those hyperlinks between the same kinds of websites can only enlarge the sizes of in-components and out-components.

Smart home design for electronic devices monitoring based wireless gateway network using cisco packet tracer

Science.gov (United States)

Sihombing, Oloan; Zendrato, Niskarto; Laia, Yonata; Nababan, Marlince; Sitanggang, Delima; Purba, Windania; Batubara, Diarmansyah; Aisyah, Siti; Indra, Evta; Siregar, Saut

2018-04-01

In the era of technological development today, the technology has become the need for the life of today's society. One is needed to create a smart home in turning on and off electronic devices via smartphone. So far in turning off and turning the home electronic device is done by pressing the switch or remote button, so in control of electronic device control less effective. The home smart design is done by simulation concept by testing system, network configuration, and wireless home gateway computer network equipment required by a smart home network on cisco packet tracer using Internet Thing (IoT) control. In testing the IoT home network wireless network gateway system, multiple electronic devices can be controlled and monitored via smartphone based on predefined configuration conditions. With the Smart Ho me can potentially increase energy efficiency, decrease energy usage costs, control electronics and change the role of residents.

Electronic Power Transformer for Power Distribution Networks

Directory of Open Access Journals (Sweden)

Ermuraсhi Iu.V.

2017-12-01

Full Text Available Reducing losses in electricity distribution networks is a current technical problem. This issue also has social and environmental aspects. As a promising solution one can examine the direct distribution from the medium voltage power network using new equipment based on the use of power electronics. The aim of the paper is to propose and argue an innovative technical solution for the realization of the Solid State Transformer (SST in order to decrease the number of energy transformation stages compared to the known solutions, simplifying the topology of the functional scheme with the reduction of production costs and the loss of energy in transformers used in electrical distribution networks. It is proposed the solution of simplifying the topology of the AC/AC electronic transformer by reducing the number of passive electronic components (resistors, inductors, capacitors and active (transistors. The inverter of the SST transformer ensures the switching mode of the transistors, using for this purpose the inductance of the magnetic leakage flux of the high frequency transformer. The robustness of the laboratory sample of the SST 10 / 0.22 kV transformer with the power of 20 kW was manufactured and tested. Testing of the laboratory sample confirmed the functionality of the proposed scheme and the possibility of switching of the transistors to at zero current (ZCS mode with the reduction of the energy losses. In the proposed converter a single high-frequency transformer with a simplified construction with two windings is used, which reduces its mass and the cost of making the transformer. The reduction in the manufacturing cost of the converter is also due to the decrease in the number of links between the functional elements.

Impact of carbon nanotube length on electron transport in aligned carbon nanotube networks

International Nuclear Information System (INIS)

Lee, Jeonyoon; Stein, Itai Y.; Devoe, Mackenzie E.; Lewis, Diana J.; Lachman, Noa; Buschhorn, Samuel T.; Wardle, Brian L.; Kessler, Seth S.

2015-01-01

Here, we quantify the electron transport properties of aligned carbon nanotube (CNT) networks as a function of the CNT length, where the electrical conductivities may be tuned by up to 10× with anisotropies exceeding 40%. Testing at elevated temperatures demonstrates that the aligned CNT networks have a negative temperature coefficient of resistance, and application of the fluctuation induced tunneling model leads to an activation energy of ≈14 meV for electron tunneling at the CNT-CNT junctions. Since the tunneling activation energy is shown to be independent of both CNT length and orientation, the variation in electron transport is attributed to the number of CNT-CNT junctions an electron must tunnel through during its percolated path, which is proportional to the morphology of the aligned CNT network

Impact of carbon nanotube length on electron transport in aligned carbon nanotube networks

Energy Technology Data Exchange (ETDEWEB)

Lee, Jeonyoon; Stein, Itai Y. [Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave., Cambridge, Massachusetts 02139 (United States); Devoe, Mackenzie E. [Department of Materials Science and Engineering, Massachusetts Institute of Technology, 77 Massachusetts Ave., Cambridge, Massachusetts 02139 (United States); Lewis, Diana J.; Lachman, Noa; Buschhorn, Samuel T.; Wardle, Brian L., E-mail: wardle@mit.edu [Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, 77 Massachusetts Ave., Cambridge, Massachusetts 02139 (United States); Kessler, Seth S. [Metis Design Corporation, 205 Portland St., Boston, Massachusetts 02114 (United States)

2015-02-02

Here, we quantify the electron transport properties of aligned carbon nanotube (CNT) networks as a function of the CNT length, where the electrical conductivities may be tuned by up to 10× with anisotropies exceeding 40%. Testing at elevated temperatures demonstrates that the aligned CNT networks have a negative temperature coefficient of resistance, and application of the fluctuation induced tunneling model leads to an activation energy of ≈14 meV for electron tunneling at the CNT-CNT junctions. Since the tunneling activation energy is shown to be independent of both CNT length and orientation, the variation in electron transport is attributed to the number of CNT-CNT junctions an electron must tunnel through during its percolated path, which is proportional to the morphology of the aligned CNT network.

Electronic collaboration in dermatology resident training through social networking.

Science.gov (United States)

Meeks, Natalie M; McGuire, April L; Carroll, Bryan T

2017-04-01

The use of online educational resources and professional social networking sites is increasing. The field of dermatology is currently under-utilizing online social networking as a means of professional collaboration and sharing of training materials. In this study, we sought to assess the current structure of and satisfaction with dermatology resident education and gauge interest for a professional social networking site for educational collaboration. Two surveys-one for residents and one for faculty-were electronically distributed via the American Society for Dermatologic Surgery and Association of Professors of Dermatology (APD) listserves. The surveys confirmed that there is interest among dermatology residents and faculty in a dermatology professional networking site with the goal to enhance educational collaboration.

Impact of stand-by energy losses in electronic devices on smart network performance

Directory of Open Access Journals (Sweden)

Mandić-Lukić Jasmina S.

2012-01-01

Full Text Available Limited energy resources and environmental concerns due to ever increasing energy consumption, more and more emphasis is being put on energy savings. Smart networks are promoted worldwide as a powerful tool used to improve the energy efficiency through consumption management, as well as to enable the distributed power generation, primarily based on renewable energy sources, to be optimally explored. To make it possible for the smart networks to function, a large number of electronic devices is needed to operate or to be in their stand-by mode. The consumption of these devices is added to the consumption of many other electronic devices already in use in households and offices, thus giving rise to the overall power consumption and threatening to counteract the primary function of smart networks. This paper addresses the consumption of particular electronic devices, with an emphasis placed on their thermal losses when in stand-by mode and their total share in the overall power consumption in certain countries. The thermal losses of electronic devices in their stand-by mode are usually neglected, but it seems theoretically possible that a massive increase in their number can impact net performance of the future smart networks considerably so that above an optimum level of energy savings achieved by their penetration, total consumption begins to increase. Based on the current stand-by energy losses from the existing electronic devices, we propose that the future penetration of smart networks be optimized taking also into account losses from their own electronic devices, required to operate in stand-by mode.

Planning the electron traffic in semiconductor networks: A mesoscopic analog of the Braess paradox encountered in road networks

International Nuclear Information System (INIS)

Huant, S.; Liu, P.; Sellier, H.; Baltazar, S.; Hackens, B.; Martins, F.; Bayot, V.; Wallart, X.; Desplanque, L.; Pala, M. G.

2013-01-01

By combining quantum simulations of electron transport and scanning-gate microscopy, we have shown that the current transmitted through a semiconductor two-path rectangular network in the ballistic and coherent regimes of transport can be paradoxically degraded by adding a third path to the network. This is analogous to the Braess paradox occurring in classical networks. Simulations reported here enlighten the role played by congestion in the network

Traffic Rules in Electronic Financial Transactions (EFT Networks

Directory of Open Access Journals (Sweden)

Vedran Batoš

2002-01-01

Full Text Available This paper presents the traffic rules in the EFT (ElectronicFinancial Transactions networks, based on the implementationof the solution called Gold-Net developed and implementedby Euronet Worldwide Inc. Following the traffic rulesin EFT networks, out of its worldwide experience, Gold-Netevolved a comprehensive and expandable EFT network solutiondesigned to meet an institution's needs today and in the future.It is an ITM (Integrated Transaction Management solution,modular and expandable, and consists of a comprehensiveEFT software modules with ATM and POS driving capabilities.The combination of ATM management and the onlineconnection form the intercept processing control module. Asthe marketplace grows, this solution ensures that an ente1prisemay position itself for future growth and expanded service offerings.

Les réseaux d'enseignants – Quels sont les comportements rédactionnels des locuteurs ? What are editorial behaviors on French teachers networks?

Directory of Open Access Journals (Sweden)

Isabelle Quentin

2012-10-01

Full Text Available Depuis une dizaine d'années, des enseignants créent et animent, en dehors des stricts circuits institutionnels, des réseaux d'échanges professionnels en s'appuyant sur les technologies du web participatif. Encore peu étudiés, plusieurs de ces réseaux en ligne connaissent aujourd'hui une forte audience. Cet article a plus spécifiquement pour objet de proposer et de tester une méthode nous permettant de rendre compte des comportements rédactionnels des enseignants qui s'expriment sur les forums hébergés par ces réseaux professionnels. Notre corpus est composé de 91 fils de discussion publiés sur le forum du réseau Pédago2.0. Ce réseau professionnel rassemble près de 500 professeurs en histoire et géographie. La plupart d'entre eux sont fortement investis dans l'association Les Clionautes et peuvent être qualifiés d'enseignants innovants. L'analyse de données quantitatives ainsi que des messages publiés sur le forum Pédago2.0, nous ont permis de mettre en lumière différents modes implicites de fonctionnement que nous présentons dans cet article.Over the past decade, teachers have created and animated corporate networks based on technologies of the Web 2.0 outside the strict institutional hierarchy. Yet little studied, many of these online networks are now welcomed with great success. The aim of this article is to provide a framework enabling us to identify significant aspects of teachers' behavior when they talk on newsgroups hosted through these networks. We tested our framework on a corpus of 91 threads of discussion published on the Pédago2.0 newsgroup. This professional network gathers nearly 500 French history and geography teachers. Most of these teachers are deeply implicated in an association, Les Clionautes, and can be described as innovating teachers. Quantitative data and posted messages analysis allowed us to highlight some implicit functioning rules, which we are presenting in this article.

Impact of distributed generation units with power electronic converters on distribution network protection

NARCIS (Netherlands)

Morren, J.; Haan, de S.W.H.

2008-01-01

An increasing number of distributed generation units (DG units) are connected to the distribution network. These generators affect the operation and coordination of the distribution network protection. The influence from DG units that are coupled to the network with a power electronic converter

A neural network model of the relativistic electron flux at geosynchronous orbit

International Nuclear Information System (INIS)

Koons, H.C.; Gorney, D.J.

1991-01-01

A neural network has been developed to model the temporal variations of relativistic (>3 MeV) electrons at geosynchronous orbit based on model inputs consisting of 10 consecutive days of the daily sum of the planetary magnetic index ΣKp. The neural network consists of three layers of neurons, containing 10 neurons in the input layer, 6 neurons in a hidden layer, and 1 output neuron. The output is a prediction of the daily-averaged electron flux for the tenth day. The neural network was trained using 62 days of data from July 1, 1984, through August 31, 1984, from the SEE spectrometer on the geosynchronous spacecraft 1982-019. The performance of the model was measured by comparing model outputs with measured fluxes over a 6-year period from April 19, 1982, to June 4, 1988. For the entire data set the rms logarithmic error of the neural network is 0.76, and the average logarithmic error is 0.58. The neural network is essentially zero biased, and for accumulation intervals of 3 days or longer the average logarithmic error is less than 0.1. The neural network provides results that are significantly more accurate than those from linear prediction filters. The model has been used to simulate conditions which are rarely observed in nature, such as long periods of quiet (ΣKp = 0) and ideal impulses. It has also been used to make reasonably accurate day-ahead forecasts of the relativistic electron flux at geosynchronous orbit

Single-walled carbon nanotube networks for flexible and printed electronics

International Nuclear Information System (INIS)

Zaumseil, Jana

2015-01-01

Networks of single-walled carbon nanotubes (SWNTs) can be processed from solution and have excellent mechanical properties. They are highly flexible and stretchable. Depending on the type of nanotubes (semiconducting or metallic) they can be used as replacements for metal or transparent conductive oxide electrodes or as semiconducting layers for field-effect transistors (FETs) with high carrier mobilities. They are thus competitive alternatives to other solution-processable materials for flexible and printed electronics. This review introduces the basic properties of SWNTs, current methods for dispersion and separation of metallic and semiconducting SWNTs and techniques to deposit and pattern dense networks from dispersion. Recent examples of applications of carbon nanotubes as conductors and semiconductors in (opto-)electronic devices and integrated circuits will be discussed. (paper)

Subspace Methods for Massive and Messy Data

Science.gov (United States)

2017-07-12

We also use four datasets from the 20 newsgroups corpus3: atheism- religion , autos-motorcycle, cryptography-electronics and mac-windows. We compared...with rank R, indicating the data has few degrees of freedom . The key observation in our work studying the variety model is that despite the data

Stretchable Electronic Sensors of Nanocomposite Network Films for Ultrasensitive Chemical Vapor Sensing.

Science.gov (United States)

Yan, Hong; Zhong, Mengjuan; Lv, Ze; Wan, Pengbo

2017-11-01

A stretchable, transparent, and body-attachable chemical sensor is assembled from the stretchable nanocomposite network film for ultrasensitive chemical vapor sensing. The stretchable nanocomposite network film is fabricated by in situ preparation of polyaniline/MoS 2 (PANI/MoS 2 ) nanocomposite in MoS 2 suspension and simultaneously nanocomposite deposition onto prestrain elastomeric polydimethylsiloxane substrate. The assembled stretchable electronic sensor demonstrates ultrasensitive sensing performance as low as 50 ppb, robust sensing stability, and reliable stretchability for high-performance chemical vapor sensing. The ultrasensitive sensing performance of the stretchable electronic sensors could be ascribed to the synergistic sensing advantages of MoS 2 and PANI, higher specific surface area, the reliable sensing channels of interconnected network, and the effectively exposed sensing materials. It is expected to hold great promise for assembling various flexible stretchable chemical vapor sensors with ultrasensitive sensing performance, superior sensing stability, reliable stretchability, and robust portability to be potentially integrated into wearable electronics for real-time monitoring of environment safety and human healthcare. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Role of Electronic Learning Technology in Networks Systems

International Nuclear Information System (INIS)

Abd ELhamid, A.; Ayad, N.M.A.; Fouad, Y.; Abdelkader, T.

2016-01-01

Recently, Electronic Learning Technology (ELT) has been widely spread as one of the new technologies in the world through using Information and Communication Technology (ICT). One of the strategies of ELT is Simulation, for instance Military and Medical simulations that are used to avoid risks and reduce Costs. A wireless communication network refers to any network not physically connected by cables, which enables the desired convenience and mobility for the user. Wireless communication networks have been useful in areas such as commerce, education and defense. According to the nature of a particular application, they can be used in home-based and industrial systems or in commercial and military environments. Historically, Mobile Ad-hoc Networks (MANET) have primarily been used for tactical military network related applications to improve battlefield communications/ survivability. MANET is a collection of wireless nodes that can dynamically be set up anywhere and anytime without using any pre-existing network infrastructure. Mobility in wireless networks basically refers to nodes changing its point of attachment to the network. Also, how the end terminals can move, there are many mobility models described the movement of nodes, many researchers use the Random Way point Mobility Model (RWPM). In this paper, a Graphical User Interface (GUI) for RWPM simulation is introduced as a proposal to be used through ELT Project. In the research area of computer and communications networks, simulation is a very useful technique for the behavior of networks

Clinical Assistant Diagnosis for Electronic Medical Record Based on Convolutional Neural Network.

Science.gov (United States)

Yang, Zhongliang; Huang, Yongfeng; Jiang, Yiran; Sun, Yuxi; Zhang, Yu-Jin; Luo, Pengcheng

2018-04-20

Automatically extracting useful information from electronic medical records along with conducting disease diagnoses is a promising task for both clinical decision support(CDS) and neural language processing(NLP). Most of the existing systems are based on artificially constructed knowledge bases, and then auxiliary diagnosis is done by rule matching. In this study, we present a clinical intelligent decision approach based on Convolutional Neural Networks(CNN), which can automatically extract high-level semantic information of electronic medical records and then perform automatic diagnosis without artificial construction of rules or knowledge bases. We use collected 18,590 copies of the real-world clinical electronic medical records to train and test the proposed model. Experimental results show that the proposed model can achieve 98.67% accuracy and 96.02% recall, which strongly supports that using convolutional neural network to automatically learn high-level semantic features of electronic medical records and then conduct assist diagnosis is feasible and effective.

Bosch automotive electrics and automotive electronics. Systems and components, networking and hybrid drive. 5. ed.

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-07-01

Complete reference guide to automotive electrics and electronics. The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the ''Automotive Electric, Automotive Electronics'' technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle.

A model for the electronic support of practice-based research networks.

Science.gov (United States)

Peterson, Kevin A; Delaney, Brendan C; Arvanitis, Theodoros N; Taweel, Adel; Sandberg, Elisabeth A; Speedie, Stuart; Richard Hobbs, F D

2012-01-01

The principal goal of the electronic Primary Care Research Network (ePCRN) is to enable the development of an electronic infrastructure to support clinical research activities in primary care practice-based research networks (PBRNs). We describe the model that the ePCRN developed to enhance the growth and to expand the reach of PBRN research. Use cases and activity diagrams were developed from interviews with key informants from 11 PBRNs from the United States and United Kingdom. Discrete functions were identified and aggregated into logical components. Interaction diagrams were created, and an overall composite diagram was constructed describing the proposed software behavior. Software for each component was written and aggregated, and the resulting prototype application was pilot tested for feasibility. A practical model was then created by separating application activities into distinct software packages based on existing PBRN business rules, hardware requirements, network requirements, and security concerns. We present an information architecture that provides for essential interactions, activities, data flows, and structural elements necessary for providing support for PBRN translational research activities. The model describes research information exchange between investigators and clusters of independent data sites supported by a contracted research director. The model was designed to support recruitment for clinical trials, collection of aggregated anonymous data, and retrieval of identifiable data from previously consented patients across hundreds of practices. The proposed model advances our understanding of the fundamental roles and activities of PBRNs and defines the information exchange commonly used by PBRNs to successfully engage community health care clinicians in translational research activities. By describing the network architecture in a language familiar to that used by software developers, the model provides an important foundation for the

Electron percolation in realistic models of carbon nanotube networks

International Nuclear Information System (INIS)

Simoneau, Louis-Philippe; Villeneuve, Jérémie; Rochefort, Alain

2015-01-01

The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models

Electron percolation in realistic models of carbon nanotube networks

Science.gov (United States)

Simoneau, Louis-Philippe; Villeneuve, Jérémie; Rochefort, Alain

2015-09-01

The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models.

Healable, Transparent, Room-Temperature Electronic Sensors Based on Carbon Nanotube Network-Coated Polyelectrolyte Multilayers.

Science.gov (United States)

Bai, Shouli; Sun, Chaozheng; Yan, Hong; Sun, Xiaoming; Zhang, Han; Luo, Liang; Lei, Xiaodong; Wan, Pengbo; Chen, Xiaodong

2015-11-18

Transparent and conductive film based electronics have attracted substantial research interest in various wearable and integrated display devices in recent years. The breakdown of transparent electronics prompts the development of transparent electronics integrated with healability. A healable transparent chemical gas sensor device is assembled from layer-by-layer-assembled transparent healable polyelectrolyte multilayer films by developing effective methods to cast transparent carbon nanotube (CNT) networks on healable substrates. The healable CNT network-containing film with transparency and superior network structures on self-healing substrate is obtained by the lateral movement of the underlying self-healing layer to bring the separated areas of the CNT layer back into contact. The as-prepared healable transparent film is assembled into healable transparent chemical gas sensor device for flexible, healable gas sensing at room temperature, due to the 1D confined network structure, relatively high carrier mobility, and large surface-to-volume ratio. The healable transparent chemical gas sensor demonstrates excellent sensing performance, robust healability, reliable flexibility, and good transparency, providing promising opportunities for developing flexible, healable transparent optoelectronic devices with the reduced raw material consumption, decreased maintenance costs, improved lifetime, and robust functional reliability. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Electronic network modeling of rechargeable batteries: II: The NiCd system

NARCIS (Netherlands)

Notten, P.H.L.; Kruijt, W.S.; Bergveld, H.J.

1998-01-01

Based on the concept of a defined sealed rechargeable NiCd battery, the mathematics of the various electrochemical and physical processes occurring inside the battery are described. Subsequently, these sets of mathematical equations are clustered and converted into an electronic network model.

How Sustainable are Benefits from Global Production Networks? Malaysia's Upgrading Prospects in the Electronics Industry

OpenAIRE

Dieter Ernst

2003-01-01

The paper introduces an operational definition of industrial upgrading (IU and documents the emergence of complex, multi-tier "networks of networks" which provide new opportunities for IU, but which also raise threshold requirements for participating in these networks. I highlight structural weaknesses of the Malaysian electronics industry that constrain its upgrading prospects; assess current policies that try to link cluster development and global network integration; discuss adjustments in...

The Development and Implementation of a Global Network for Eurasia Educational Service Using Electronic Mail.

Science.gov (United States)

Algee, Alan

The purpose of this study was to choose an appropriate network provider for educational consultants and to develop and implement the network at Eurasia Educational Services (EES) using electronic mail (e-mail). The following eight steps were undertaken: literature review, scanning and selecting of provider criteria, decision-making, participant…

Impact of stand-by energy losses in electronic devices on smart network performance

OpenAIRE

Mandić-Lukić Jasmina S.; Pantović Vladan S.; Vasiljević Željko S.

2012-01-01

Limited energy resources and environmental concerns due to ever increasing energy consumption, more and more emphasis is being put on energy savings. Smart networks are promoted worldwide as a powerful tool used to improve the energy efficiency through consumption management, as well as to enable the distributed power generation, primarily based on renewable energy sources, to be optimally explored. To make it possible for the smart networks to function, a large number of electronic dev...

Calculating electronic tunnel currents in networks of disordered irregularly shaped nanoparticles by mapping networks to arrays of parallel nonlinear resistors

Energy Technology Data Exchange (ETDEWEB)

Aghili Yajadda, Mir Massoud [CSIRO Manufacturing Flagship, P.O. Box 218, Lindfield NSW 2070 (Australia)

2014-10-21

We have shown both theoretically and experimentally that tunnel currents in networks of disordered irregularly shaped nanoparticles (NPs) can be calculated by considering the networks as arrays of parallel nonlinear resistors. Each resistor is described by a one-dimensional or a two-dimensional array of equal size nanoparticles that the tunnel junction gaps between nanoparticles in each resistor is assumed to be equal. The number of tunnel junctions between two contact electrodes and the tunnel junction gaps between nanoparticles are found to be functions of Coulomb blockade energies. In addition, the tunnel barriers between nanoparticles were considered to be tilted at high voltages. Furthermore, the role of thermal expansion coefficient of the tunnel junction gaps on the tunnel current is taken into account. The model calculations fit very well to the experimental data of a network of disordered gold nanoparticles, a forest of multi-wall carbon nanotubes, and a network of few-layer graphene nanoplates over a wide temperature range (5-300 K) at low and high DC bias voltages (0.001 mV–50 V). Our investigations indicate, although electron cotunneling in networks of disordered irregularly shaped NPs may occur, non-Arrhenius behavior at low temperatures cannot be described by the cotunneling model due to size distribution in the networks and irregular shape of nanoparticles. Non-Arrhenius behavior of the samples at zero bias voltage limit was attributed to the disorder in the samples. Unlike the electron cotunneling model, we found that the crossover from Arrhenius to non-Arrhenius behavior occurs at two temperatures, one at a high temperature and the other at a low temperature.

Making Friends in Cyberspace.

Science.gov (United States)

Parks, Malcolm R.; Floyd, Kory

1996-01-01

Finds that just over 60% of a random sample of people in an Internet newsgroup reported forming a personal relationship with someone they had first contacted through a newsgroup. Shows that nearly two-thirds of those whose personal relationship began online chose to have other forms of contact as well. (SR)

Adaptive Learning Rule for Hardware-based Deep Neural Networks Using Electronic Synapse Devices

OpenAIRE

Lim, Suhwan; Bae, Jong-Ho; Eum, Jai-Ho; Lee, Sungtae; Kim, Chul-Heung; Kwon, Dongseok; Park, Byung-Gook; Lee, Jong-Ho

2017-01-01

In this paper, we propose a learning rule based on a back-propagation (BP) algorithm that can be applied to a hardware-based deep neural network (HW-DNN) using electronic devices that exhibit discrete and limited conductance characteristics. This adaptive learning rule, which enables forward, backward propagation, as well as weight updates in hardware, is helpful during the implementation of power-efficient and high-speed deep neural networks. In simulations using a three-layer perceptron net...

Stochastic resonance in an ensemble of single-electron neuromorphic devices and its application to competitive neural networks

International Nuclear Information System (INIS)

Oya, Takahide; Asai, Tetsuya; Amemiya, Yoshihito

2007-01-01

Neuromorphic computing based on single-electron circuit technology is gaining prominence because of its massively increased computational efficiency and the increasing relevance of computer technology and nanotechnology [Likharev K, Mayr A, Muckra I, Tuerel O. CrossNets: High-performance neuromorphic architectures for CMOL circuits. Molec Electron III: Ann NY Acad Sci 1006;2003:146-63; Oya T, Schmid A, Asai T, Leblebici Y, Amemiya Y. On the fault tolerance of a clustered single-electron neural network for differential enhancement. IEICE Electron Expr 2;2005:76-80]. The maximum impact of these technologies will be strongly felt when single-electron circuits based on fault- and noise-tolerant neural structures can operate at room temperature. In this paper, inspired by stochastic resonance (SR) in an ensemble of spiking neurons [Collins JJ, Chow CC, Imhoff TT. Stochastic resonance without tuning. Nature 1995;376:236-8], we propose our design of a basic single-electron neural component and report how we examined its statistical results on a network

The research of development dynamics of electronic social networks for the effective advertisement of online shops in the segment of Ukrainian network business

Directory of Open Access Journals (Sweden)

O.I. Grabar

2015-09-01

Full Text Available The article presents the research results of development dynamics of the Ukrainian segment of different social networks in the global network. The general methods of creation and development of online shop are described. The methods of creation and development of marketing communications for online shops and their influence on the development of electronic business in Ukraine are presented. The article gives the detailed analysis of statistical data on age & gender related distribution of the Ukrainian segment of the biggest world social networks. The author also introduces new instruments for marketing communications worked out by every social network. The basic principles of advertisement campaign realization for online shops with the use of target audience of certain groups in social networks are generalized.

Trust and Control Dynamics in Agrifood Supply Networks: Communication Strategies for Electronic Transaction Environments

OpenAIRE

Fritz, Melanie; Hausen, Tobias

2006-01-01

Agrifood supply networks are dynamic structures where firms regularly face the need to search for new market partners. A decision for a transaction with a new partner requires the existence of appropriate control and safeguard mechanisms as well as trust to overcome perceived risk and uncertainties. Electronic transaction environments offer new potentials for the identification of new transaction partners. However, trust and control need to be communicated appropriately in electronic transact...

The feasibility of using neural networks to obtain cross sections from electron swarm data

International Nuclear Information System (INIS)

Morgan, W.L.

1991-01-01

This paper reports that although still more a curiosity than an accepted technique in computational modeling, the very new field of neural computing is beginning to find applications in physics. Presented in some background on neural computing and a discussion on the use of neural networks to obtain electron-impact cross sections from measured drift velocities, characteristic energies, and other swarm data. This is what is known as an inverse problem, a class of problems for which neural networks may be frequently superior to other numerical algorithms. Momentum transfer cross sections obtained for a model problem and for xenon using a neural network are presented

Predicting the topology of dynamic neural networks for the simulation of electronic circuits

NARCIS (Netherlands)

Schilders, W.H.A.

2009-01-01

In this paper we discuss the use of the state-space modelling MOESP algorithm to generate precise information about the number of neurons and hidden layers in dynamic neural networks developed for the behavioural modelling of electronic circuits. The Bartels–Stewart algorithm is used to transform

Operational parameters of an opto-electronic neural network employing fixed planar holographic interconnects

Science.gov (United States)

Keller, P. E.; Gmitro, A. F.

1993-07-01

A prototype neutral network system of multifaceted, planar interconnection holograms and opto-electronic neurons is analyzed. This analysis shows that a hologram fabricated with electron-beam lithography has the capacity to connect 6700 neuron outputs to 6700 neuron inputs, and that, the encoded synaptic weights have a precision of approximately 5 bits. Higher interconnection densities can be achieved by accepting a lower synaptic weight accuracy. For systems employing laser diodes at the outputs of the neurons, processing rates in the range of 45 to 720 trillion connections per second can potentially be achieved.

Possible Roles of Neural Electron Spin Networks in Memory and Consciousness

CERN Document Server

Hu, H P

2004-01-01

Spin is the origin of quantum effects in both Bohm and Hestenes quantum formulism and a fundamental quantum process associated with the structure of space-time. Thus, we have recently theorized that spin is the mind-pixel and developed a qualitative model of consciousness based on nuclear spins inside neural membranes and proteins. In this paper, we explore the possibility of unpaired electron spins being the mind-pixels. Besides free O2 and NO, the main sources of unpaired electron spins in neural membranes and proteins are transition metal ions and O2 and NO bound/absorbed to large molecules, free radicals produced through biochemical reactions and excited molecular triplet states induced by fluctuating internal magnetic fields. We show that unpaired electron spin networks inside neural membranes and proteins are modulated by action potentials through exchange and dipolar coupling tensors and spin-orbital coupling and g-factor tensors and perturbed by microscopically strong and fluctuating internal magnetic...

Medical imaging and the Internet

International Nuclear Information System (INIS)

Jones, D.N.; Carr, P.

1995-01-01

A brief introduction to the INTERNET and its benefits for those involved in nuclear medical imaging is given. In Australia, depending on the type of institution/department involved, connection to the INTERNET may be obtained via the Australian Academic and Research Network or through a commercial provider. The recent proliferation of WWW servers has also resulted in multiple medical imaging databases and teaching resources becoming available to the user. Some Newsgroups and WWW addresses related to radiology are provided. 3 refs

A deep convolutional neural network to analyze position averaged convergent beam electron diffraction patterns.

Science.gov (United States)

Xu, W; LeBeau, J M

2018-05-01

We establish a series of deep convolutional neural networks to automatically analyze position averaged convergent beam electron diffraction patterns. The networks first calibrate the zero-order disk size, center position, and rotation without the need for pretreating the data. With the aligned data, additional networks then measure the sample thickness and tilt. The performance of the network is explored as a function of a variety of variables including thickness, tilt, and dose. A methodology to explore the response of the neural network to various pattern features is also presented. Processing patterns at a rate of  ∼ 0.1 s/pattern, the network is shown to be orders of magnitude faster than a brute force method while maintaining accuracy. The approach is thus suitable for automatically processing big, 4D STEM data. We also discuss the generality of the method to other materials/orientations as well as a hybrid approach that combines the features of the neural network with least squares fitting for even more robust analysis. The source code is available at https://github.com/subangstrom/DeepDiffraction. Copyright © 2018 Elsevier B.V. All rights reserved.

Cosmic ray antiproton/electron discrimination capability of the CAPRICE silicon-tungsten calorimeter using neural networks

International Nuclear Information System (INIS)

Bellotti, R.; Boezio, M.; Castellano, M.; De Marzo, C.; Picozza, P.; Prigiobbe, V.; Sparvoli, R.; Tirocchi, M.

1996-01-01

A data analysis based on an artificial neural network classifier is proposed to identify cosmic ray antiprotons detected with the CAPRICE silicon-tungsten imaging calorimeter against electron background in the energy range 1.2-4.0 GeV. A set of new physical variables, describing the events inside the calorimeter on the base of their different patterns, are introduced in order to discriminate between hadronic and electromagnetic showers. The ability of the artificial neural network classifier to perform a careful multidimensional analysis gives the possibility to identify antiprotons with an electron rejection 408±85 (stat) at 95.0±0.2 (stat)% of signal detection efficiency. The high accuracy achieved by this method improves substantially the efficiency in the evaluation of the cosmic ray antiproton spectrum. (orig.)

Investigation of Strategic Changes Using Patent Co-Inventor Network Analysis: The Case of Samsung Electronics

Directory of Open Access Journals (Sweden)

Sungchul Choi

2016-12-01

Full Text Available The aim of this paper is to propose a method to investigate a firm’s strategic changes. Technologies or technological capabilities are a major resource for achieving competitive advantages, so a firm’s R&D effort to improve capabilities on specific technologies is aligned with strategic direction. Therefore, this research analyzes changes in R&D efforts by identifying key R&D personnel using patent co-inventor network and social network analysis. Based on characteristics of application and granted patents, the method analyzes current and future R&D efforts and so identifies strategic changes of a firm. We conducted an empirical analysis using the patents of Samsung Electronics. Our method analyzed the current and future strategies of Samsung Electronics and the result shows clear strategic changes in their focal technologies and business.

Innovative, wearable snap connector technology for improved device networking in electronic garments

Science.gov (United States)

Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

2007-04-01

This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

Modelling and Simulation of National Electronic Product Code Network Demonstrator Project

Science.gov (United States)

Mo, John P. T.

The National Electronic Product Code (EPC) Network Demonstrator Project (NDP) was the first large scale consumer goods track and trace investigation in the world using full EPC protocol system for applying RFID technology in supply chains. The NDP demonstrated the methods of sharing information securely using EPC Network, providing authentication to interacting parties, and enhancing the ability to track and trace movement of goods within the entire supply chain involving transactions among multiple enterprise. Due to project constraints, the actual run of the NDP was 3 months only and was unable to consolidate with quantitative results. This paper discusses the modelling and simulation of activities in the NDP in a discrete event simulation environment and provides an estimation of the potential benefits that can be derived from the NDP if it was continued for one whole year.

Reliable Transport over SpaceWire for James Webb Space Telescope (JWST) Focal Plane Electronics (FPE) Network

Science.gov (United States)

Rakow, Glenn; Schnurr, Richard; Dailey, Christopher; Shakoorzadeh, Kamdin

2003-01-01

NASA's James Webb Space Telescope (JWST) faces difficult technical and budgetary challenges to overcome before it is scheduled launch in 2010. The Integrated Science Instrument Module (ISIM), shares these challenges. The major challenge addressed in this paper is the data network used to collect, process, compresses and store Infrared data. A total of 114 Mbps of raw information must be collected from 19 sources and delivered to the two redundant data processing units across a twenty meter deployed thermally restricted interface. Further data must be transferred to the solid-state recorder and the spacecraft. The JWST detectors are kept at cryogenic temperatures to obtain the sensitivity necessary to measure faint energy sources. The Focal Plane Electronics (FPE) that sample the detector, generate packets from the samples, and transmit these packets to the processing electronics must dissipate little power in order to help keep the detectors at these cold temperatures. Separating the low powered front-end electronics from the higher-powered processing electronics, and using a simple high-speed protocol to transmit the detector data minimize the power dissipation near the detectors. Low Voltage Differential Signaling (LVDS) drivers were considered an obvious choice for physical layer because of their high speed and low power. The mechanical restriction on the number cables across the thermal interface force the Image packets to be concentrated upon two high-speed links. These links connect the many image packet sources, Focal Plane Electronics (FPE), located near the cryogenic detectors to the processing electronics on the spacecraft structure. From 12 to 10,000 seconds of raw data are processed to make up an image, various algorithms integrate the pixel data Loss of commands to configure the detectors as well as the loss of science data itself may cause inefficiency in the use of the telescope that are unacceptable given the high cost of the observatory. This

Predictive models for pressure ulcers from intensive care unit electronic health records using Bayesian networks.

Science.gov (United States)

Kaewprag, Pacharmon; Newton, Cheryl; Vermillion, Brenda; Hyun, Sookyung; Huang, Kun; Machiraju, Raghu

2017-07-05

We develop predictive models enabling clinicians to better understand and explore patient clinical data along with risk factors for pressure ulcers in intensive care unit patients from electronic health record data. Identifying accurate risk factors of pressure ulcers is essential to determining appropriate prevention strategies; in this work we examine medication, diagnosis, and traditional Braden pressure ulcer assessment scale measurements as patient features. In order to predict pressure ulcer incidence and better understand the structure of related risk factors, we construct Bayesian networks from patient features. Bayesian network nodes (features) and edges (conditional dependencies) are simplified with statistical network techniques. Upon reviewing a network visualization of our model, our clinician collaborators were able to identify strong relationships between risk factors widely recognized as associated with pressure ulcers. We present a three-stage framework for predictive analysis of patient clinical data: 1) Developing electronic health record feature extraction functions with assistance of clinicians, 2) simplifying features, and 3) building Bayesian network predictive models. We evaluate all combinations of Bayesian network models from different search algorithms, scoring functions, prior structure initializations, and sets of features. From the EHRs of 7,717 ICU patients, we construct Bayesian network predictive models from 86 medication, diagnosis, and Braden scale features. Our model not only identifies known and suspected high PU risk factors, but also substantially increases sensitivity of the prediction - nearly three times higher comparing to logistical regression models - without sacrificing the overall accuracy. We visualize a representative model with which our clinician collaborators identify strong relationships between risk factors widely recognized as associated with pressure ulcers. Given the strong adverse effect of pressure ulcers

Teaching strategies applied to teaching computer networks in Engineering in Telecommunications and Electronics

Directory of Open Access Journals (Sweden)

Elio Manuel Castañeda-González

2016-07-01

Full Text Available Because of the large impact that today computer networks, their study in related fields such as Telecommunications Engineering and Electronics is presented to the student with great appeal. However, by digging in content, lacking a strong practical component, you can make this interest decreases considerably. This paper proposes the use of teaching strategies and analogies, media and interactive applications that enhance the teaching of discipline networks and encourage their study. It is part of an analysis of how the teaching of the discipline process is performed and then a description of each of these strategies is done with their respective contribution to student learning.

Structural and electronic properties of InN nanowire network grown by vapor-liquid-solid method

Science.gov (United States)

Barick, B. K.; Rodríguez-Fernández, Carlos; Cantarero, Andres; Dhar, S.

2015-05-01

Growth of InN nanowires have been carried out on quartz substrates at different temperatures by vapor-liquid-solid (VLS) technique using different thicknesses of Au catalyst layer. It has been found that a narrow window of Au layer thickness and growth temperature leads to multi-nucleation, in which each site acts as the origin of several nanowires. In this multi-nucleation regime, several tens of micrometer long wires with diameter as small as 20 nm are found to grow along [ 11 2 ¯ 0 ] direction (a-plane) to form a dense network. Structural and electronic properties of these wires are studied. As grown nanowires show degenerate n-type behavior. Furthermore, x-ray photoemission study reveals an accumulation of electrons on the surface of these nanowires. Interestingly, the wire network shows persistence of photoconductivity for several hours after switching off the photoexcitation.

Structural and electronic properties of InN nanowire network grown by vapor-liquid-solid method

Energy Technology Data Exchange (ETDEWEB)

Barick, B. K., E-mail: bkbarick@gmail.com, E-mail: subho-dh@yahoo.co.in; Dhar, S., E-mail: bkbarick@gmail.com, E-mail: subho-dh@yahoo.co.in [Department of Physics, Indian Institute of Technology, Bombay, Mumbai-400076 (India); Rodríguez-Fernández, Carlos; Cantarero, Andres [Materials Science Institute, University of Valencia, PO Box 22085, 46071 Valencia (Spain)

2015-05-15

Growth of InN nanowires have been carried out on quartz substrates at different temperatures by vapor-liquid-solid (VLS) technique using different thicknesses of Au catalyst layer. It has been found that a narrow window of Au layer thickness and growth temperature leads to multi-nucleation, in which each site acts as the origin of several nanowires. In this multi-nucleation regime, several tens of micrometer long wires with diameter as small as 20 nm are found to grow along [112{sup -}0] direction (a-plane) to form a dense network. Structural and electronic properties of these wires are studied. As grown nanowires show degenerate n-type behavior. Furthermore, x-ray photoemission study reveals an accumulation of electrons on the surface of these nanowires. Interestingly, the wire network shows persistence of photoconductivity for several hours after switching off the photoexcitation.

Curling and closure of graphitic networks under electron-beam irradiation

Energy Technology Data Exchange (ETDEWEB)

Ugarte, D [Ecole Polytechnique Federale, Lausanne (Switzerland)

1992-10-22

The discovery of buckminsterfullerene (C[sub 60]) and its production in macroscopic quantities has stimulated a great deal of research. More recently, attention has turned towards other curved graphitic networks, such as the giant fullerenes (C[sub n], n > 100) and carbon nanotubes. A general mechanism has been proposed in which the graphitic sheets bend in an attempt to eliminate the highly energetic dangling bonds present at the edge of the growing structure. Here, I report the response of carbon soot particles and tubular graphitic structures to intense electron-beam irradiation in a high-resolution electron microscope; such conditions resemble a high-temperature regime, permitting a degree of structural fluidity. With increased irradiation, there is a gradual reorganization of the initial material into quasi-spherical particles composed of concentric graphitic shells. This lends weight to the nucleation scheme proposed for fullerenes, and moreover, suggests that planar graphite may not be the most stable allotrope of carbon in systems of limited size. (Author).

Electron transfer between a quinohemoprotein alcohol dehydrogenase and an electrode via a redox polymer network

NARCIS (Netherlands)

Stigter, E.C.A.; Jong, G.A.H. de; Jongejan, J.A.; Duine, J.A.; Lugt, J.P. van der; Somers, W.A.C.

1996-01-01

A quinohemoprotein alcohol dehydrogenase (QH-EDH) from Comamonas testosteroni was immobilized on an electrode in a redox polymer network consisting of a polyvinylpyridine partially N-complexed with osmiumbis-(bipyridine)chloride. The enzyme effectively transfers electrons to the electrode via the

NASAwide electronic publishing system: Electronic printing and duplicating, stage-2 evaluation report (GSFC)

Science.gov (United States)

Tuey, Richard C.; Lane, Robert; Hart, Susan V.

1995-01-01

The NASA Scientific and Technical Information Office was assigned the responsibility to continue with the expansion of the NASAwide networked electronic duplicating effort by including the Goddard Space Flight Center (GSFC) as an additional node to the existing configuration of networked electronic duplicating systems within NASA. The subject of this report is the evaluation of a networked electronic duplicating system which meets the duplicating requirements and expands electronic publishing capabilities without increasing current operating costs. This report continues the evaluation reported in 'NASA Electronic Publishing System - Electronic Printing and Duplicating Evaluation Report' (NASA TM-106242) and 'NASA Electronic Publishing System - Stage 1 Evaluation Report' (NASA TM-106510). This report differs from the previous reports through the inclusion of an external networked desktop editing, archival, and publishing functionality which did not exist with the previous networked electronic duplicating system. Additionally, a two-phase approach to the evaluation was undertaken; the first was a paper study justifying a 90-day, on-site evaluation, and the second phase was to validate, during the 90-day evaluation, the cost benefits and productivity increases that could be achieved in an operational mode. A benchmark of the functionality of the networked electronic publishing system and external networked desktop editing, archival, and publishing system was performed under a simulated daily production environment. This report can be used to guide others in determining the most cost effective duplicating/publishing alternative through the use of cost/benefit analysis and return on investment techniques. A treatise on the use of these techniques can be found by referring to 'NASA Electronic Publishing System -Cost/Benefit Methodology' (NASA TM-106662).

Structural and electronic properties of InN nanowire network grown by vapor-liquid-solid method

Directory of Open Access Journals (Sweden)

B. K. Barick

2015-05-01

Full Text Available Growth of InN nanowires have been carried out on quartz substrates at different temperatures by vapor-liquid-solid (VLS technique using different thicknesses of Au catalyst layer. It has been found that a narrow window of Au layer thickness and growth temperature leads to multi-nucleation, in which each site acts as the origin of several nanowires. In this multi-nucleation regime, several tens of micrometer long wires with diameter as small as 20 nm are found to grow along [ 11 2 ̄ 0 ] direction (a-plane to form a dense network. Structural and electronic properties of these wires are studied. As grown nanowires show degenerate n-type behavior. Furthermore, x-ray photoemission study reveals an accumulation of electrons on the surface of these nanowires. Interestingly, the wire network shows persistence of photoconductivity for several hours after switching off the photoexcitation.

Refrigerant flow through electronic expansion valve: Experiment and neural network modeling

International Nuclear Information System (INIS)

Cao, Xiang; Li, Ze-Yu; Shao, Liang-Liang; Zhang, Chun-Lu

2016-01-01

Highlights: • Experimental data from different sources were used in comparison of EEV models. • Artificial neural network in EEV modeling is superior to literature correlations. • Artificial neural network with 4-4-1 structure and S function is recommended. • Artificial neural network is flexible for EEV mass flow rate and opening prediction. - Abstract: Electronic expansion valve (EEV) plays a crucial role in controlling refrigerant mass flow rate of refrigeration or heat pump systems for energy savings. However, complexities in two-phase throttling process and geometry make accurate modeling of EEV flow characteristics more difficult. This paper developed an artificial neural network (ANN) model using refrigerant inlet and outlet pressures, inlet subcooling, EEV opening as ANN inputs, refrigerant mass flow rate as ANN output. Both linear and nonlinear transfer functions in hidden layer were used and compared to each other. Experimental data from multiple sources including in-house experiments of one EEV with R410A were used for ANN training and test. In addition, literature correlations were compared with ANN as well. Results showed that the ANN model with nonlinear transfer function worked well in all cases and it is much accurate than the literature correlations. In all cases, nonlinear ANN predicted refrigerant mass flow rates within ±0.4% average relative deviation (A.D.) and 2.7% standard deviation (S.D.), meanwhile it predicted the EEV opening at 0.1% A.D. and 2.1% S.D.

The System Dynamics Model in Electronic Products Closed-Loop Supply Chain Distribution Network with Three-Way Recovery and the Old-for-New Policy

Directory of Open Access Journals (Sweden)

Xiao-qing Zhang

2016-01-01

Full Text Available With the technological developments and rapid changes in demand pattern, diverse varieties of electronic products are entering into the market with reduced lifecycle which leads to the environmental problems. The awareness of electronic products take-back and recovery has been increasing in electronic products supply chains. In this paper, we build a system dynamics model for electronic products closed-loop supply chain distribution network with the old-for-new policy and three electronic products recovery ways, namely, electronic products remanufacturing, electronic component reuse and remanufacturing, and electronic raw material recovery. In the simulation study, we investigate the significance of various factors including the old-for-new policy, collection and remanufacturing, their interactions and the type of their impact on bullwhip, and profitability through sensitivity analysis. Our results instruct that the old-for-new policy and three electronic products recovery ways can reduce the bullwhip effect in the retailers and the distributors and increases the profitability in the closed-loop supply chain distribution network.

An additional DNS feature for different routing of electronic mail inside and outside of a campus network

International Nuclear Information System (INIS)

Bobyshev, A.; Ernst, M.

2001-01-01

Several years ago DESY faced the need to change the Electronic Mail Service to support it on a central cluster of servers. The centralized architecture was necessary for deployment of unified internal E-Mail standards, better quality of service and security. To implement a new policy for Electronic Mail Service and avoid huge modifications to a few hundreds network nodes, an additional DNS feature has been added to ISC's (Internet Software Consortium) software bind-4.9.7. The DNS servers running at DESY are capable of distinguishing between DNS queries coming from inside and outside of the campus network and reply with different list of MX (Mail Exchanger) records. The external hosts always get a list of MX records pointing to the central mail servers while the internal hosts may use different paths for mail exchange within the campus network. A modified version of DNS software has been used at DESY since 1997. It is fully compliant with the original goal of the project and shows good operational performance and reliability

Marketing of Academic Library Services through Social Networking Sites: Implications of Electronic Word-of-Mouth

Science.gov (United States)

Siddike, Md. Abul Kalam; Kiran, K.

2015-01-01

The main objective of this study is to investigate the perceptions of academic librarians towards the marketing of library services through social networking sites (SNSs) and their understanding of using electronic word-of-mouth (eWOM) as a marketing tool in academic libraries. This study follows a qualitative data-gathering approach of structured…

What makes one spread the word online - A study on electronic word of mouth motivations on social networking sites

OpenAIRE

Sridharan, Santhya

2016-01-01

Master's thesis in International hotel and tourism management The main focus of the study is to understand what motivates a person to give electronic word of mouth (eWOM) on social networking sites. With the increasing popularity of social networking sites, lots of consumers check these sites for reviews of products and services. Based on the literature review, a scale of motives that lead to giving eWOM by means of writing comments on social networking sites was developed. The study used ...

The ESTRO-EQUAL quality assurance network for photon and electron radiotherapy beams in Germany

International Nuclear Information System (INIS)

Ferreira, I.H.; Dutreix, A.; Richter, J.; Bridier, A.; Chavaudra, J.; Svensson, H.

2001-01-01

Background: In 1998 an ESTRO Quality Assurance Network for radiotherapy (EQUAL) has been set up for 25 European countries for photon and electron beams in reference and non-reference conditions. Material and Methods: Measurements are done using LiF powder (DTL937-Philitech, France) that is processed with the PCL3 automatic reader (Fimel-PTW). The participating centers irradiate the TLDs with an absorbed dose of 2 Gy according to the clinical routine. Results: Until September 2000 EQUAL has checked 135 photon beams (including the beams rechecked) from 51 radiotherapy centers in Germany out of 86 accepted centers. The results show that 2% of the beam outputs in reference conditions and 3% of the percentage depth doses are outside the tolerance level (deviation > ± 5%). 6% of the beam output variations and of the wedge transmission factors show deviations > ± 5%. The global analysis of results shows deviations > ± 5% in at least one parameter for 18 beams out of the 135 beams checked. Five rechecked beams present one ''real dosimetric'' problem in one or more parameters, corresponding to 4% of the 114 beams for which the deviations cannot be attributed to set-up errors. - The EQUAL network has checked 89 electron beams in Germany. The results show that all beam outputs checked are within the tolerance level. The standard deviation for the beam output in reference conditions is 2.0% and 2.2% for the beam output for the others field sizes. The percentage of deviations > 3% and ≤ 5% for the reference beam output is higher for electron beams than for photon beam checks. Therefore the electron beam calibration and the TPS algorithms should be improved to increase the accuracy of the patient dosimetry for radiotherapy. (orig.) [de

Library Networks and Electronic Publishing.

Science.gov (United States)

Olvey, Lee D.

1995-01-01

Provides a description of present and proposed plans and strategies of OCLC (Online Computer Library Center) and their relationship to electronic publishing. FirstSearch (end-user access to secondary information), GUIDON (electronic journals online) and FastDoc (document delivery) are emphasized. (JKP)

Electronic School.

Science.gov (United States)

Executive Educator, 1994

1994-01-01

This issue of "The Electronic School" features a special forum on computer networking. Articles specifically focus on network operating systems, cabling requirements, and network architecture. Tom Wall argues that virtual reality is not yet ready for classroom use. B.J. Novitsky profiles two high schools experimenting with CD-ROM…

Network topology for the formation of solvated electrons in binary CaO–Al2O3 composition glasses

Science.gov (United States)

Akola, Jaakko; Kohara, Shinji; Ohara, Koji; Fujiwara, Akihiko; Watanabe, Yasuhiro; Masuno, Atsunobu; Usuki, Takeshi; Kubo, Takashi; Nakahira, Atsushi; Nitta, Kiyofumi; Uruga, Tomoya; Weber, J. K. Richard; Benmore, Chris J.

2013-01-01

Glass formation in the CaO–Al2O3 system represents an important phenomenon because it does not contain typical network-forming cations. We have produced structural models of CaO–Al2O3 glasses using combined density functional theory–reverse Monte Carlo simulations and obtained structures that reproduce experiments (X-ray and neutron diffraction, extended X-ray absorption fine structure) and result in cohesive energies close to the crystalline ground states. The O–Ca and O–Al coordination numbers are similar in the eutectic 64 mol % CaO (64CaO) glass [comparable to 12CaO·7Al2O3 (C12A7)], and the glass structure comprises a topologically disordered cage network with large-sized rings. This topologically disordered network is the signature of the high glass-forming ability of 64CaO glass and high viscosity in the melt. Analysis of the electronic structure reveals that the atomic charges for Al are comparable to those for Ca, and the bond strength of Al–O is stronger than that of Ca–O, indicating that oxygen is more weakly bound by cations in CaO-rich glass. The analysis shows that the lowest unoccupied molecular orbitals occurs in cavity sites, suggesting that the C12A7 electride glass [Kim SW, Shimoyama T, Hosono H (2011) Science 333(6038):71–74] synthesized from a strongly reduced high-temperature melt can host solvated electrons and bipolarons. Calculations of 64CaO glass structures with few subtracted oxygen atoms (additional electrons) confirm this observation. The comparable atomic charges and coordination of the cations promote more efficient elemental mixing, and this is the origin of the extended cage structure and hosted solvated (trapped) electrons in the C12A7 glass. PMID:23723350

Evaluation of a Web-based social network electronic game in enhancing mental health literacy for young people.

Science.gov (United States)

Li, Tim M H; Chau, Michael; Wong, Paul W C; Lai, Eliza S Y; Yip, Paul S F

2013-05-15

Internet-based learning programs provide people with massive health care information and self-help guidelines on improving their health. The advent of Web 2.0 and social networks renders significant flexibility to embedding highly interactive components, such as games, to foster learning processes. The effectiveness of game-based learning on social networks has not yet been fully evaluated. The aim of this study was to assess the effectiveness of a fully automated, Web-based, social network electronic game on enhancing mental health knowledge and problem-solving skills of young people. We investigated potential motivational constructs directly affecting the learning outcome. Gender differences in learning outcome and motivation were also examined. A pre/posttest design was used to evaluate the fully automated Web-based intervention. Participants, recruited from a closed online user group, self-assessed their mental health literacy and motivational constructs before and after completing the game within a 3-week period. The electronic game was designed according to cognitive-behavioral approaches. Completers and intent-to-treat analyses, using multiple imputation for missing data, were performed. Regression analysis with backward selection was employed when examining the relationship between knowledge enhancement and motivational constructs. The sample included 73 undergraduates (42 females) for completers analysis. The gaming approach was effective in enhancing young people's mental health literacy (d=0.65). The finding was also consistent with the intent-to-treat analysis, which included 127 undergraduates (75 females). No gender differences were found in learning outcome (P=.97). Intrinsic goal orientation was the primary factor in learning motivation, whereas test anxiety was successfully alleviated in the game setting. No gender differences were found on any learning motivation subscales (P>.10). We also found that participants' self-efficacy for learning and

Library usage patterns in the electronic information environment. Electronic journals, Use studies, Libraries, Medical libraries

Directory of Open Access Journals (Sweden)

B. Franklin

2004-01-01

Full Text Available This paper examines the methodology and results from Web-based surveys of more than 15,000 networked electronic services users in the United States between July 1998 and June 2003 at four academic health sciences libraries and two large main campus libraries serving a variety of disciplines. A statistically valid methodology for administering simultaneous Web-based and print-based surveys using the random moments sampling technique is discussed and implemented. Results from the Web-based surveys showed that at the four academic health sciences libraries, there were approximately four remote networked electronic services users for each in-house user. This ratio was even higher for faculty, staff, and research fellows at the academic health sciences libraries, where more than five remote users for each in-house user were recorded. At the two main libraries, there were approximately 1.3 remote users for each in-house user of electronic information. Sponsored research (grant funded research accounted for approximately 32% of the networked electronic services activity at the health sciences libraries and 16% at the main campus libraries. Sponsored researchers at the health sciences libraries appeared to use networked electronic services most intensively from on-campus, but not from in the library. The purpose of use for networked electronic resources by patrons within the library is different from the purpose of use of those resources by patrons using the resources remotely. The implications of these results on how librarians reach decisions about networked electronic resources and services are discussed.

Virus Particle Detection by Convolutional Neural Network in Transmission Electron Microscopy Images.

Science.gov (United States)

Ito, Eisuke; Sato, Takaaki; Sano, Daisuke; Utagawa, Etsuko; Kato, Tsuyoshi

2018-06-01

A new computational method for the detection of virus particles in transmission electron microscopy (TEM) images is presented. Our approach is to use a convolutional neural network that transforms a TEM image to a probabilistic map that indicates where virus particles exist in the image. Our proposed approach automatically and simultaneously learns both discriminative features and classifier for virus particle detection by machine learning, in contrast to existing methods that are based on handcrafted features that yield many false positives and require several postprocessing steps. The detection performance of the proposed method was assessed against a dataset of TEM images containing feline calicivirus particles and compared with several existing detection methods, and the state-of-the-art performance of the developed method for detecting virus was demonstrated. Since our method is based on supervised learning that requires both the input images and their corresponding annotations, it is basically used for detection of already-known viruses. However, the method is highly flexible, and the convolutional networks can adapt themselves to any virus particles by learning automatically from an annotated dataset.

Self-assembled three dimensional network designs for soft electronics.

Science.gov (United States)

Jang, Kyung-In; Li, Kan; Chung, Ha Uk; Xu, Sheng; Jung, Han Na; Yang, Yiyuan; Kwak, Jean Won; Jung, Han Hee; Song, Juwon; Yang, Ce; Wang, Ao; Liu, Zhuangjian; Lee, Jong Yoon; Kim, Bong Hoon; Kim, Jae-Hwan; Lee, Jungyup; Yu, Yongjoon; Kim, Bum Jun; Jang, Hokyung; Yu, Ki Jun; Kim, Jeonghyun; Lee, Jung Woo; Jeong, Jae-Woong; Song, Young Min; Huang, Yonggang; Zhang, Yihui; Rogers, John A

2017-06-21

Low modulus, compliant systems of sensors, circuits and radios designed to intimately interface with the soft tissues of the human body are of growing interest, due to their emerging applications in continuous, clinical-quality health monitors and advanced, bioelectronic therapeutics. Although recent research establishes various materials and mechanics concepts for such technologies, all existing approaches involve simple, two-dimensional (2D) layouts in the constituent micro-components and interconnects. Here we introduce concepts in three-dimensional (3D) architectures that bypass important engineering constraints and performance limitations set by traditional, 2D designs. Specifically, open-mesh, 3D interconnect networks of helical microcoils formed by deterministic compressive buckling establish the basis for systems that can offer exceptional low modulus, elastic mechanics, in compact geometries, with active components and sophisticated levels of functionality. Coupled mechanical and electrical design approaches enable layout optimization, assembly processes and encapsulation schemes to yield 3D configurations that satisfy requirements in demanding, complex systems, such as wireless, skin-compatible electronic sensors.

Self-assembled three dimensional network designs for soft electronics

Science.gov (United States)

Jang, Kyung-In; Li, Kan; Chung, Ha Uk; Xu, Sheng; Jung, Han Na; Yang, Yiyuan; Kwak, Jean Won; Jung, Han Hee; Song, Juwon; Yang, Ce; Wang, Ao; Liu, Zhuangjian; Lee, Jong Yoon; Kim, Bong Hoon; Kim, Jae-Hwan; Lee, Jungyup; Yu, Yongjoon; Kim, Bum Jun; Jang, Hokyung; Yu, Ki Jun; Kim, Jeonghyun; Lee, Jung Woo; Jeong, Jae-Woong; Song, Young Min; Huang, Yonggang; Zhang, Yihui; Rogers, John A.

2017-06-01

Low modulus, compliant systems of sensors, circuits and radios designed to intimately interface with the soft tissues of the human body are of growing interest, due to their emerging applications in continuous, clinical-quality health monitors and advanced, bioelectronic therapeutics. Although recent research establishes various materials and mechanics concepts for such technologies, all existing approaches involve simple, two-dimensional (2D) layouts in the constituent micro-components and interconnects. Here we introduce concepts in three-dimensional (3D) architectures that bypass important engineering constraints and performance limitations set by traditional, 2D designs. Specifically, open-mesh, 3D interconnect networks of helical microcoils formed by deterministic compressive buckling establish the basis for systems that can offer exceptional low modulus, elastic mechanics, in compact geometries, with active components and sophisticated levels of functionality. Coupled mechanical and electrical design approaches enable layout optimization, assembly processes and encapsulation schemes to yield 3D configurations that satisfy requirements in demanding, complex systems, such as wireless, skin-compatible electronic sensors.

Flat electronic bands in fractal-kagomé network and the effect of perturbation

Energy Technology Data Exchange (ETDEWEB)

Nandy, Atanu, E-mail: atanunandy1989@gmail.com; Chakrabarti, Arunava, E-mail: arunava-chakrabarti@yahoo.co.in [Department of Physics, University of Kalyani, Kalyani, West Bengal - 741235 (India)

2016-05-06

We demonstrate an analytical prescription of demonstrating the flat band [FB] states in a fractal incorporated kagomé type network that can give rise to a countable infinity of flat non-dispersive eigenstates with a multitude of localization area. The onset of localization can, in principle, be delayed in space by an appropriate choice of energy regime. The length scale, at which the onset of localization for each mode occurs, can be tuned at will following the formalism developed within the framework of real space renormalization group. This scheme leads to an exact determination of energy eigenvalue for which one can have dispersionless flat electronic bands. Furthermore, we have shown the effect ofuniform magnetic field for the same non-translationally invariant network model that has ultimately led to an‘apparent invisibility’ of such staggered localized states and to generate absolutely continuous sub-bands in the energy spectrum and again an interesting re-entrant behavior of those FB states.

Innovation Networks: the Contribution of Partnerships to Innovative Performance of Firms in the Brazilian Electrical-Electronics Industry

Directory of Open Access Journals (Sweden)

Silvye Ane Massaini

2015-01-01

Full Text Available Innovation networks have been identified in the literature as a way to complement firms’ innovative capabilities through collaboration with other partners. To provide empirical evidence for this assertion, this paper investigates the contribution of partners established in innovation networks for innovative performance of firms in the Brazilian electricalelectronics industry. For this purpose, we carried out an exploratory and descriptive survey among 185 companies. The data were analyzed using structural equation modeling (SEM. As the main findings, we observed that the establishment of collaborative relationships with customers, competitors and universities/research institutions can contribute to organizational and process innovation. However, despite obtaining some significant results concerning the contribution of different partners in the network, electrical-electronics industry companies also attach great importance to internal activities to develop their innovations.

Connecting primary care clinics and community pharmacies through a nationwide electronic prescribing network: A qualitative study

Directory of Open Access Journals (Sweden)

Marie-Pierre Gagnon

2015-10-01

Full Text Available Background The use of medication is at the heart of primary care, but is also the cause for major health concerns. It is therefore important to examine the prescription of medication process.Objective This study identifies the barriers and facilitators perceived by community pharmacists and primary care physicians concerning the adoption of a nationwide electronic prescribing (e-prescribing network in the province of Quebec, Canada.Methods We used purposive sampling to identify the most intensive users of the e-prescribing network. We conducted phone and in-person interviews. Interviews were transcribed, and we analysed their content with NVivo, using the clinical adoption framework (CAF for the codification of the data.Results We interviewed 33 pharmacists, 2 pharmacy technicians, 11 physicians and 3 clinic managers. Adoption of the e-prescribing network was fairly low. The respondents underlined adaptation of their work environment, openness to change and perception of benefits as facilitators to the adoption of the network. However, important barriers were perceived, including system quality issues and paper prescriptions being the only legal document in the prescribing process. Even if respondents recognised that the e-prescribing network can offer substantial benefits to the prescribing process, issues still persisted and raised barriers to the full use of such a network, especially in a context where different local information systems are connected within a nationwide e-prescribing network.Conclusion This study, based on the CAF, provides a better understanding of the factors related to the adoption of a nationwide e-prescribing network connecting primary care clinics and community pharmacies. 

Linear network theory

CERN Document Server

Sander, K F

1964-01-01

Linear Network Theory covers the significant algebraic aspect of network theory, with minimal reference to practical circuits. The book begins the presentation of network analysis with the exposition of networks containing resistances only, and follows it up with a discussion of networks involving inductance and capacity by way of the differential equations. Classification and description of certain networks, equivalent networks, filter circuits, and network functions are also covered. Electrical engineers, technicians, electronics engineers, electricians, and students learning the intricacies

Electronic Transport Properties of Carbon-Nanotube Networks: The Effect of Nitrate Doping on Intratube and Intertube Conductances

Science.gov (United States)

Ketolainen, T.; Havu, V.; Jónsson, E. Ö.; Puska, M. J.

2018-03-01

The conductivity of carbon-nanotube (CNT) networks can be improved markedly by doping with nitric acid. In the present work, CNTs and junctions of CNTs functionalized with NO3 molecules are investigated to understand the microscopic mechanism of nitric acid doping. According to our density-functional-theory band-structure calculations, there is charge transfer from the CNT to adsorbed molecules indicating p -type doping. The average doping efficiency of the NO3 molecules is higher if the NO3 molecules form complexes with water molecules. In addition to electron transport along individual CNTs, we also study electron transport between different types (metallic, semiconducting) of CNTs. Reflecting the differences in the electronic structures of semiconducting and metallic CNTs, we find that in addition to turning semiconducting CNTs metallic, doping further increases electron transport most efficiently along semiconducting CNTs as well as through the junctions between them.

An electronic system for simulation of neural networks with a micro-second real time constraint

International Nuclear Information System (INIS)

Chorti, Arsenia; Granado, Bertrand; Denby, Bruce; Garda, Patrick

2001-01-01

Neural networks implemented in hardware can perform pattern recognition very quickly, and as such have been used to advantage in the triggering systems of certain high energy physics experiments. Typically, time constants of the order of a few microseconds are required. In this paper, we present a new system. MAHARADJA, for evaluating MLP and RBF neural network paradigms in real time. The system is tested on a possible ATLAS muon triggering application suggested by the Tel Aviv ATLAS group, consisting of a 4-8-8-4 MLP which must be evaluated in 10 microseconds. The inputs to the net are dx/dz, x(z=0), dy/dz, and y(z=0), whereas the outputs give pt, tan(phi), sin(theta), and q, the charge. With a 10 MHz clock, MAHARADJA calculates the result in 6.8 microseconds; at 20 MHz, which is readily attainable, this would be reduced to only 3.4 microseconds. The system can also handle RBF networks with 3 different distance metrics (Euclidean, Manhattan and Mahalanobis), and can simulate any MLP of 10 hidden layers or less. The electronic implementation is with FPGA's, which can be optimized for a specific neural network because the number of processing elements can be modified

#wheretoeat : The impact of electronic word-of-mouth in social network media on millennials’ purchase intention in the restaurant setting

OpenAIRE

Tersén, Vendela; Wecken, Katharina

2017-01-01

Social media has been growing constantly during the past years and social networking is one of the most popular online activities. This development has changed how individuals communicate with each other as it enabled valuable improvements for electronic word-of-mouth. Individuals share experiences, evaluations or opinions regarding products or services within their network, which has driven marketers’ attention towards this tool. Here, millennials are active users of social media, they have ...

The "Measuring Outcomes of Clinical Connectivity" (MOCC) trial: investigating data entry errors in the Electronic Primary Care Research Network (ePCRN).

Science.gov (United States)

Fontaine, Patricia; Mendenhall, Tai J; Peterson, Kevin; Speedie, Stuart M

2007-01-01

The electronic Primary Care Research Network (ePCRN) enrolled PBRN researchers in a feasibility trial to test the functionality of the network's electronic architecture and investigate error rates associated with two data entry strategies used in clinical trials. PBRN physicians and research assistants who registered with the ePCRN were eligible to participate. After online consent and randomization, participants viewed simulated patient records, presented as either abstracted data (short form) or progress notes (long form). Participants transcribed 50 data elements onto electronic case report forms (CRFs) without integrated field restrictions. Data errors were analyzed. Ten geographically dispersed PBRNs enrolled 100 members and completed the study in less than 7 weeks. The estimated overall error rate if field restrictions had been applied was 2.3%. Participants entering data from the short form had a higher rate of correctly entered data fields (94.5% vs 90.8%, P = .004) and significantly more error-free records (P = .003). Feasibility outcomes integral to completion of an Internet-based, multisite study were successfully achieved. Further development of programmable electronic safeguards is indicated. The error analysis conducted in this study will aid design of specific field restrictions for electronic CRFs, an important component of clinical trial management systems.

Application of Thermal Network Model to Transient Thermal Analysis of Power Electronic Package Substrate

Directory of Open Access Journals (Sweden)

Masaru Ishizuka

2011-01-01

Full Text Available In recent years, there is a growing demand to have smaller and lighter electronic circuits which have greater complexity, multifunctionality, and reliability. High-density multichip packaging technology has been used in order to meet these requirements. The higher the density scale is, the larger the power dissipation per unit area becomes. Therefore, in the designing process, it has become very important to carry out the thermal analysis. However, the heat transport model in multichip modules is very complex, and its treatment is tedious and time consuming. This paper describes an application of the thermal network method to the transient thermal analysis of multichip modules and proposes a simple model for the thermal analysis of multichip modules as a preliminary thermal design tool. On the basis of the result of transient thermal analysis, the validity of the thermal network method and the simple thermal analysis model is confirmed.

Social Networks in context of cyberspace. Consumers, electronic commerce and intellectual property in the light of the Cuban case

Directory of Open Access Journals (Sweden)

Nelvys Mendoza Gurdián

2018-06-01

Full Text Available Face the state of vulnerability in the context of cyberspace, it is necessary to reflect on the social networks and law, from a holistic approach aimed at the vulnerability of rights associated with the information in this environment. This work general objective is to analyse the phenomenon of online social networks and the information society, emphasizing on the study of the legal aspects related to consumers, electronic commerce and intellectual property. The methodology used aims to conceptualize the category of social networks, examinate the aspects associated with law in the use of social networks and establish the conceptual, legal and conflicting points of relevance. This will allow describing the problems under study and propose alternatives for a sphere of integrative protection that harmonizes the edges of the preventive, the corrective and the prophylactic.

Mapping R&D within Multinational Networks: Evidence from the Electronics Industry

Science.gov (United States)

Urze, Paula; Manatos, Maria João

Based on the final results of the R&D.COM - Local R&D COMpetencies within Global Value Chains project, this paper aims at mapping the trajectories of delocalised R&D units within a multinational’s global strategy and designing the knowledge flows within the global value chain. This analysis was performed using typologies proposed in the theoretical framework, which help us to have an overview of the network. The methodology is grounded on one extended case study that involves a local R&D unit (Portugal), a foreign R&D unit (Netherlands) and the headquarters (Norway) - developed on a multinational from the electronics industry. This case is an example of a multinational company where R&D is developed mainly in the headquarters but it is also delocalised to some subsidiaries with a certain level of autonomy.

Optimising reverse logistics network to support policy-making in the case of Electrical and Electronic Equipment.

Science.gov (United States)

Achillas, Ch; Vlachokostas, Ch; Aidonis, D; Moussiopoulos, N; Iakovou, E; Banias, G

2010-12-01

Due to the rapid growth of Waste Electrical and Electronic Equipment (WEEE) volumes, as well as the hazardousness of obsolete electr(on)ic goods, this type of waste is now recognised as a priority stream in the developed countries. Policy-making related to the development of the necessary infrastructure and the coordination of all relevant stakeholders is crucial for the efficient management and viability of individually collected waste. This paper presents a decision support tool for policy-makers and regulators to optimise electr(on)ic products' reverse logistics network. To that effect, a Mixed Integer Linear Programming mathematical model is formulated taking into account existing infrastructure of collection points and recycling facilities. The applicability of the developed model is demonstrated employing a real-world case study for the Region of Central Macedonia, Greece. The paper concludes with presenting relevant obtained managerial insights. Copyright © 2010 Elsevier Ltd. All rights reserved.

Electronic Commerce

OpenAIRE

Slavko Đerić

2016-01-01

Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks...

Incorporating deep learning with convolutional neural networks and position specific scoring matrices for identifying electron transport proteins.

Science.gov (United States)

Le, Nguyen-Quoc-Khanh; Ho, Quang-Thai; Ou, Yu-Yen

2017-09-05

In several years, deep learning is a modern machine learning technique using in a variety of fields with state-of-the-art performance. Therefore, utilization of deep learning to enhance performance is also an important solution for current bioinformatics field. In this study, we try to use deep learning via convolutional neural networks and position specific scoring matrices to identify electron transport proteins, which is an important molecular function in transmembrane proteins. Our deep learning method can approach a precise model for identifying of electron transport proteins with achieved sensitivity of 80.3%, specificity of 94.4%, and accuracy of 92.3%, with MCC of 0.71 for independent dataset. The proposed technique can serve as a powerful tool for identifying electron transport proteins and can help biologists understand the function of the electron transport proteins. Moreover, this study provides a basis for further research that can enrich a field of applying deep learning in bioinformatics. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

A COMPARATIVE STUDY OF SYSTEM NETWORK ARCHITECTURE Vs DIGITAL NETWORK ARCHITECTURE

OpenAIRE

Seema; Mukesh Arya

2011-01-01

The efficient managing system of sources is mandatory for the successful running of any network. Here this paper describes the most popular network architectures one of developed by IBM, System Network Architecture (SNA) and other is Digital Network Architecture (DNA). As we know that the network standards and protocols are needed for the network developers as well as users. Some standards are The IEEE 802.3 standards (The Institute of Electrical and Electronics Engineers 1980) (LAN), IBM Sta...

Proposal for an ad hoc computer network in the military electronic systems department at the military academy applying bluetooth technology

Directory of Open Access Journals (Sweden)

Miroslav R. Terzić

2011-01-01

Full Text Available The historical development of the Bluetooth module is given in the introduction of this paper. The importance of the Bluetooth standard for wireless connection on small distances is shown as well. The organization of the Department of Military Electronic Systems is presented with its area of duties, subordinate sections and deployment. The concept of a local area network for this Department, using Bluetooth technology, includes network topology and working regimes based on the main characteristics and technical specifications for the connection with Bluetooth technology. The Department's disperse computer network is proposed as a scatter net where one piconetwork includes the Head of Department and the Heads of Sections while other piconetworks are formed from the Heads of Sections and their subordinates. The security aspect of the presented network deals with basic computer network attack categories, protection methods and aspects. The paper concludes with some recommendations for the local area network using Bluetooth technology with respect to its economical and security aspects as well as to the managing principles of the Department.

Digital networks for the image management

International Nuclear Information System (INIS)

Gomez del Campo L, A.

1999-01-01

The digital networks designed specifically for the X-ray departments in the hospitals already were found in open development at beginning the 80's decade. Actually the digital network will be present include the image generation without the necessity to use film in direct form and in its case to print it through a laser ray printers network, an electronic image file, the possibility to integrate the hospitable information system to the electronic expedient which will allow communicate radiograph electronic files and consult by satellite via the problem cases. (Author)

GROUPWARE - MODERN INFORMATION MANAGERIAL METHOD

Directory of Open Access Journals (Sweden)

Rozalia NISTOR

2006-01-01

Full Text Available The notion groupware contents the information technologies that facilitate theteam work and that are intended for communication, collaboration,coordination within the organization. Having as base software routines forteamwork, the groupware technology has many applications in themanagement process of the organization. The notion groupware refers to aspecial class of web packages connected to a network of personalcomputers: email, chat, video IP, newsgroups, etc. The studies from theliterature consider the groupware as a class of software programs thatfacilitate the coordination, the communication and the cooperation within themember of a group. As in marketing the marketing-mix is known as the “4P”,in the area of groupware its characteristics are known as the “3C”:communication within the group; coordination among the members of thegroup; collaboration among the members of the group. From the groupwaresoftware those with relevance for the managerial activity are: electronic mail,Internet meetings, time management, project management, the managementof dissimulated information. The groupware technologies can be divised inmany categories based on two elements: time and space. The users of agroupware work together in the same time – real time groupware, or invarious periods of time – offline groupware.

Lexicon on automatic network operation. 1, computing and electronics. Lexique de l'exploitation automatisee du reseau. Fascicule 1: informatique et electronique

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

This bilingual dictionary covers terminology relating to the operation of electric power networks. This particular volume includes those terms applicable to data processing, computing, electricity and electronics, telecommunications, and related equipment and processes. It is intended for use by specialists working in the field of technical specifications and in computerized network operation systems as well as for use by those working with such systems. It is in two parts: French to English and English to French.

The Community Integration Questionnaire - Revised: Australian normative data and measurement of electronic social networking.

Science.gov (United States)

Callaway, Libby; Winkler, Dianne; Tippett, Alice; Herd, Natalie; Migliorini, Christine; Willer, Barry

2016-06-01

Consideration of the relationship between meaningful participation, health and wellbeing underpins occupational therapy intervention, and drives measurement of community integration following acquired brain injury (ABI). However, utility of community integration measures has been limited to date by lack of normative data against which to compare outcomes, and none examine the growing use of electronic social networking (ESN) for social participation. This research had four aims: (i) develop and pilot items assessing ESN to add to the Community Integration Questionnaire, producing the Community Integration Questionnaire-Revised (CIQ-R); (ii) examine factor structure of the CIQ-R; (iii) collect Australian CIQ-R normative data; and (iv) assess test-retest reliability of the revised measure. Australia. A convenience sample of adults without ABI (N = 124) was used to develop and pilot ESN items. A representative general population sample of adults without ABI aged 18-64 years (N = 1973) was recruited to gather normative CIQ-R data. Cross-sectional survey. Demographic items and the CIQ-R. The CIQ-R demonstrated acceptable psychometric properties, with minor modification to the original scoring based on the factor analyses provided. Large representative general population CIQ-R normative data have been established, detailing contribution of a range of independent demographic variables to community integration. The addition of electronic social networking items to the CIQ-R offers a contemporary method of assessing community integration following ABI. Normative CIQ-R data enhance the understanding of community integration in the general population, allowing occupational therapists and other clinicians to make more meaningful comparisons between groups. © 2016 Occupational Therapy Australia.

Comparative analysis of the terms "electronic commerce" and "electronic business"

OpenAIRE

Kavaliauskienė, Virginija; Šarapovas, Tadas

2002-01-01

Establishing the terms that clearly and consistently describe growing and dynamic networked economy is a critical first step toward further analysis and evaluation of electronic commerce and electronic business processes. Electronic commerce is making an impact on the ways that purchasing activities are being conducted. Much of the early literature on this subject was very speculative. However, the growth of e-commerce has enabled more observations to be made of the use of electronic business...

Business Mododelling of Electronic Brokerage

DEFF Research Database (Denmark)

Skouby, Knud Erik; Øst, Alexander Gorm

1998-01-01

The central task of Business Modelling is to develop a theoretical techno-economic reference model for analyses of the value chain in the production of brokerage services in electronic networks......The central task of Business Modelling is to develop a theoretical techno-economic reference model for analyses of the value chain in the production of brokerage services in electronic networks...

Towards green high capacity optical networks

Science.gov (United States)

Glesk, I.; Mohd Warip, M. N.; Idris, S. K.; Osadola, T. B.; Andonovic, I.

2011-09-01

The demand for fast, secure, energy efficient high capacity networks is growing. It is fuelled by transmission bandwidth needs which will support among other things the rapid penetration of multimedia applications empowering smart consumer electronics and E-businesses. All the above trigger unparallel needs for networking solutions which must offer not only high-speed low-cost "on demand" mobile connectivity but should be ecologically friendly and have low carbon footprint. The first answer to address the bandwidth needs was deployment of fibre optic technologies into transport networks. After this it became quickly obvious that the inferior electronic bandwidth (if compared to optical fiber) will further keep its upper hand on maximum implementable serial data rates. A new solution was found by introducing parallelism into data transport in the form of Wavelength Division Multiplexing (WDM) which has helped dramatically to improve aggregate throughput of optical networks. However with these advancements a new bottleneck has emerged at fibre endpoints where data routers must process the incoming and outgoing traffic. Here, even with the massive and power hungry electronic parallelism routers today (still relying upon bandwidth limiting electronics) do not offer needed processing speeds networks demands. In this paper we will discuss some novel unconventional approaches to address network scalability leading to energy savings via advance optical signal processing. We will also investigate energy savings based on advanced network management through nodes hibernation proposed for Optical IP networks. The hibernation reduces the network overall power consumption by forming virtual network reconfigurations through selective nodes groupings and by links segmentations and partitionings.

Software-defined networking control plane for seamless integration of multiple silicon photonic switches in Datacom networks.

Science.gov (United States)

Shen, Yiwen; Hattink, Maarten H N; Samadi, Payman; Cheng, Qixiang; Hu, Ziyiz; Gazman, Alexander; Bergman, Keren

2018-04-16

Silicon photonics based switches offer an effective option for the delivery of dynamic bandwidth for future large-scale Datacom systems while maintaining scalable energy efficiency. The integration of a silicon photonics-based optical switching fabric within electronic Datacom architectures requires novel network topologies and arbitration strategies to effectively manage the active elements in the network. We present a scalable software-defined networking control plane to integrate silicon photonic based switches with conventional Ethernet or InfiniBand networks. Our software-defined control plane manages both electronic packet switches and multiple silicon photonic switches for simultaneous packet and circuit switching. We built an experimental Dragonfly network testbed with 16 electronic packet switches and 2 silicon photonic switches to evaluate our control plane. Observed latencies occupied by each step of the switching procedure demonstrate a total of 344 µs control plane latency for data-center and high performance computing platforms.

An Ensemble of Neural Networks for Online Electron Filtering at the ATLAS Experiment.

CERN Document Server

Da Fonseca Pinto, Joao Victor; The ATLAS collaboration

2018-01-01

In 2017 the ATLAS experiment implemented an ensemble of neural networks (NeuralRinger algorithm) dedicated to improving the performance of filtering events containing electrons in the high-input rate online environment of the Large Hadron Collider at CERN, Geneva. The ensemble employs a concept of calorimetry rings. The training procedure and final structure of the ensemble are used to minimize fluctuations from detector response, according to the particle energy and position of incidence. A detailed study was carried out to assess profile distortions in crucial offline quantities through the usage of statistical tests and residual analysis. These details and the online performance of this algorithm during the 2017 data-taking will be presented.

An Electronic Mail List for a Network of Family Practice Residency Programs: A Good Idea?

Directory of Open Access Journals (Sweden)

Jodi Summers Holtrop

2001-08-01

Full Text Available The use of an electronic mailing list as a means of communication among faculty in a network of university-affiliated family practice residency programs was evaluated. Faculty were automatically subscribed to the list by the list owner. Messages were tracked for one year and a written evaluation survey was sent. Ninety two messages were sent, with 52% of the messages being posted information. While most (65% survey respondents reported reading 61% or more of the messages, with only 33% ever actually posted at least one message to the list. Given that faculty were automatically subscribed and that there were only 84 total members, the list may have failed to reach a critical mass of active participants. It is concluded that an email list for network faculty did not function as an online discussion group, although it was extremely beneficial as a way of posting information to affiliated residency faculty.

Report for fiscal 2000 on electronic patient record network discussion committee. Survey on promotion of medical information use utilizing electronic patient record network; 2000 nendo denshi karute network kento iinkai hokokusho. Denshi karute network wo katsuyoshita iryo johoka no sokushin ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Based on the movements in the most advanced IT technologies and in social system reformation in the medical and health preservation fields, discussions were given on the assignments and measures to be solved to realize the medical information network, and the secondary utilization method of the medical information and the assignments and measures in the utilization thereof. A patient record is originally a document stating the secrets of a patient for his or her medical information, and has a nature that doctors may be sued from the patient if they disclose or exchange the document. There is a large number of company owners, politicians or salaried people who would not want their diseases which they had in the past, the name of the existing disease and medical treatment to be made public. The electronic patient record network has a conflicting proposition to elevate its values by means of data re-utilization, secondary utilization and information exchange. Preparation of the database requires multilateral analyses and classifications, as well as sufficient discussions and realistic execution including the consistency with the personal information protection law, as to whether it is information that the patient wants the exchange or disclosure, or whether it is information to be exchanged or disclosed even if the patient refuses it, not speak of attention to 5W1H. (NEDO)

Communicating embedded systems networks applications

CERN Document Server

Krief, Francine

2013-01-01

Embedded systems become more and more complex and require having some knowledge in various disciplines such as electronics, data processing, telecommunications and networks. Without detailing all the aspects related to the design of embedded systems, this book, which was written by specialists in electronics, data processing and telecommunications and networks, gives an interesting point of view of communication techniques and problems in embedded systems. This choice is easily justified by the fact that embedded systems are today massively communicating and that telecommunications and network

Routing strategies in traffic network and phase transition in network ...

Indian Academy of Sciences (India)

3Department of Electronic Engineering, City University of Hong Kong, Hong Kong ... Routing strategy; network traffic flow; hysteretic loop; phase transition from ... ered from two aspects: modifying the underlying network structure or developing ... capacity corresponds to α = −1 in the case of identical nodes' delivering ability.

Plugging in: Canada's oil and gas industry sits at the crossroads of a new information era

Energy Technology Data Exchange (ETDEWEB)

1994-09-09

A review is presented of the uses of the 'information highway' for the oil and gas industry. The Canadian Petroleum Internet Consortium (CANPIC) has been founded to: set up an electronic mail system between technical society members; create an environment for technology exchange between professionals; and to create an electronic bulletin board for commercial opportunities. The petroleum industry is well situated to take advantage of the information revolution with its technical and professional expertise, computing power, and environment of cooperative transfer of information and technology. At present, though, less than half of major oil and gas companies have Internet access. Newsgroups that cater to the oil and gas industry are discussed. While most information is free, fee-based services are emerging. Access routes to the Internet are described.

The Nature and Variability of Automated Practice Alerts Derived from Electronic Health Records in a U.S. Nationwide Critical Care Research Network.

Science.gov (United States)

Benthin, Cody; Pannu, Sonal; Khan, Akram; Gong, Michelle

2016-10-01

The nature, variability, and extent of early warning clinical practice alerts derived from automated query of electronic health records (e-alerts) currently used in acute care settings for clinical care or research is unknown. To describe e-alerts in current use in acute care settings at medical centers participating in a nationwide critical care research network. We surveyed investigators at 38 institutions involved in the National Institutes of Health-funded Clinical Trials Network for the Prevention and Early Treatment of Acute Lung Injury (PETAL) for quantitative and qualitative analysis. Thirty sites completed the survey (79% response rate). All sites used electronic health record systems. Epic Systems was used at 56% of sites; the others used alternate commercially available vendors or homegrown systems. Respondents at 57% of sites represented in this survey used e-alerts. All but 1 of these 17 sites used an e-alert for early detection of sepsis-related syndromes, and 35% used an e-alert for pneumonia. E-alerts were triggered by abnormal laboratory values (37%), vital signs (37%), or radiology reports (15%) and were used about equally for clinical decision support and research. Only 59% of sites with e-alerts have evaluated them either for accuracy or for validity. A majority of the research network sites participating in this survey use e-alerts for early notification of potential threats to hospitalized patients; however, there was significant variability in the nature of e-alerts between institutions. Use of one common electronic health record vendor at more than half of the participating sites suggests that it may be possible to standardize e-alerts across multiple sites in research networks, particularly among sites using the same medical record platform.

Digital electronics

CERN Document Server

Morris, John

2013-01-01

An essential companion to John C Morris's 'Analogue Electronics', this clear and accessible text is designed for electronics students, teachers and enthusiasts who already have a basic understanding of electronics, and who wish to develop their knowledge of digital techniques and applications. Employing a discovery-based approach, the author covers fundamental theory before going on to develop an appreciation of logic networks, integrated circuit applications and analogue-digital conversion. A section on digital fault finding and useful ic data sheets completes th

Electronic Commerce: Themes, Concepts and Relationships

Directory of Open Access Journals (Sweden)

Kuo-Hsun Yu

2008-12-01

Full Text Available In this paper, bibliometric (co-citation analysis and social network analysis techniques are used to investigate the intellectual pillars of the electronic commerce literature as reported in SSCI and SCI journals between 2002 and 2006. By analyzing 22,760 citations of 840 articles, this study maps an invisible network of knowledge of electronic commerce studies. The results of the mapping can help identify the research direction of electronic commerce research and provide a valuable tool for researchers to access the literature in this area.

Neural network prediction of relativistic electrons at geosynchronous orbit during the storm recovery phase: effects of recurring substorms

Directory of Open Access Journals (Sweden)

M. Fukata

2002-07-01

Full Text Available During the recovery phase of geomagnetic storms, the flux of relativistic (>2 MeV electrons at geosynchronous orbits is enhanced. This enhancement reaches a level that can cause devastating damage to instruments on satellites. To predict these temporal variations, we have developed neural network models that predict the flux for the period 1–12 h ahead. The electron-flux data obtained during storms, from the Space Environment Monitor on board a Geostationary Meteorological Satellite, were used to construct the model. Various combinations of the input parameters AL, SAL, Dst and SDst were tested (where S denotes the summation from the time of the minimum Dst. It was found that the model, including SAL as one of the input parameters, can provide some measure of relativistic electron-flux prediction at geosynchronous orbit during the recovery phase. We suggest from this result that the relativistic electron-flux enhancement during the recovery phase is associated with recurring substorms after Dst minimum and their accumulation effect.Key words. Magnetospheric physics (energetic particles, trapped; magnetospheric configuration and dynamics; storms and substorms

Local network assessment

Science.gov (United States)

Glen, D. V.

1985-04-01

Local networks, related standards activities of the Institute of Electrical and Electronics Engineers the American National Standards Institute and other elements are presented. These elements include: (1) technology choices such as topology, transmission media, and access protocols; (2) descriptions of standards for the 802 local area networks (LAN's); high speed local networks (HSLN's) and military specification local networks; and (3) intra- and internetworking using bridges and gateways with protocols Interconnection (OSI) reference model. The convergence of LAN/PBX technology is also described.

Effects of Electronic Trust on Purchase Intentions in Online Social Review Networks: The Case of Tripadvisor.com

OpenAIRE

Öztüren, Ali

2013-01-01

The purpose of this research study is to examine the effects of trust beliefs on purchase intentions of trip planners within the context of online social review network by analyzing dimensions of e-trust and effects on purchase intentions. With the intention to test these effects a survey was executed and the data collected from 320 participants. Multiple regression analysis was conducted to analyze the hypotheses related to the factors affecting the overall electronic trust level and purchas...

Electronic devices and circuits

CERN Document Server

Pridham, Gordon John

1972-01-01

Electronic Devices and Circuits, Volume 3 provides a comprehensive account on electronic devices and circuits and includes introductory network theory and physics. The physics of semiconductor devices is described, along with field effect transistors, small-signal equivalent circuits of bipolar transistors, and integrated circuits. Linear and non-linear circuits as well as logic circuits are also considered. This volume is comprised of 12 chapters and begins with an analysis of the use of Laplace transforms for analysis of filter networks, followed by a discussion on the physical properties of

Interconnectivity and the Electronic Academic Library

Directory of Open Access Journals (Sweden)

Donald E. Riggs

1988-03-01

Full Text Available 無Due to the emphasis on the use of computing networks on campuses and to the very nature of more information being accessible to library users only via electronic means, we are witnessing a migration to electronic academic libraries. this new type of library is being required to have interconnections with the campus' other online information/data systems. Arizona State University libraries have been provided the opportunity to develop an electronic library that will be the focal point of a campus-wide information/data network.

Understanding telecommunications networks

CERN Document Server

Valdar, Andy

2017-01-01

A telecommunications network is an electronic system of links, nodes and the controls that govern their operations to allow voice and data transfer among users and devices. This fully revised, updated and expanded second edition covers all aspects of today's networks, including how they are planned, formed and operated.

Motives behind positive electronic Word-of-Mouth on social networking sites : So, why do you "like" that?

OpenAIRE

Jansson, Christine; Zakharkina, Polina

2013-01-01

Consumers are increasingly engaging with brands on social networking sites (SNS) through activities such as sharing, commenting, liking and recommending products or brands to other consumers. These types of recommendations are referred to as electronic word‐of‐mouth (eWOM) and are proven to have a significant influence on consumers’ purchasing decisions. Previous research has investigated motives for traditional WOM and motives for eWOM on opinion platforms. This study proposes that eWOM on S...

Electronic Commerce

Directory of Open Access Journals (Sweden)

Slavko Đerić

2016-12-01

Full Text Available Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks, including the Internet. Electronic commerce is not limited just to buying and selling, but it also includes all pre-sales and after-sales ongoing activities along the supply chain. Introducing electronic commerce, using the Internet and Web services in business, realizes the way to a completely new type of economy - internet economy.

NET-2 Network Analysis Program

International Nuclear Information System (INIS)

Malmberg, A.F.

1974-01-01

The NET-2 Network Analysis Program is a general purpose digital computer program which solves the nonlinear time domain response and the linearized small signal frequency domain response of an arbitrary network of interconnected components. NET-2 is capable of handling a variety of components and has been applied to problems in several engineering fields, including electronic circuit design and analysis, missile flight simulation, control systems, heat flow, fluid flow, mechanical systems, structural dynamics, digital logic, communications network design, solid state device physics, fluidic systems, and nuclear vulnerability due to blast, thermal, gamma radiation, neutron damage, and EMP effects. Network components may be selected from a repertoire of built-in models or they may be constructed by the user through appropriate combinations of mathematical, empirical, and topological functions. Higher-level components may be defined by subnetworks composed of any combination of user-defined components and built-in models. The program provides a modeling capability to represent and intermix system components on many levels, e.g., from hole and electron spatial charge distributions in solid state devices through discrete and integrated electronic components to functional system blocks. NET-2 is capable of simultaneous computation in both the time and frequency domain, and has statistical and optimization capability. Network topology may be controlled as a function of the network solution. (U.S.)

Home Networking Do-It-Yourself For Dummies

CERN Document Server

Miller, Lawrence C

2011-01-01

Step by step guide to connecting all your electronic devices into one network A home network allows you to share Internet connections, photos, video, music, game consoles, printers, and other electronic gadgets. This do-it-yourself guide shows you step by step how to create a wired or wireless network in your home. In the For Dummies tradition of making technology less intimidating, Home Networking Do-It-Yourself For Dummies breaks down the process into easy steps with clear instructions.Increasing broadband speeds, cellular technology, the explosive growth of iPhone sales, and the new Home Gr

Handbook on electronic commerce

Energy Technology Data Exchange (ETDEWEB)

Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

2000-07-01

The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

Sentinel Network

Science.gov (United States)

The Sentinel Network is an integrated, electronic, national medical product safety initiative that compiles information about the safe and effective use of medical products accessible to patients and healthcare practitioners.

Optical protocols for advanced spacecraft networks

Science.gov (United States)

Bergman, Larry A.

1991-01-01

Most present day fiber optic networks are in fact extensions of copper wire networks. As a result, their speed is still limited by electronics even though optics is capable of running three orders of magnitude faster. Also, the fact that photons do not interact with one another (as electrons do) provides optical communication systems with some unique properties or new functionality that is not readily taken advantage of with conventional approaches. Some of the motivation for implementing network protocols in the optical domain, a few possible approaches including optical code-division multiple-access (CDMA), and how this class of networks can extend the technology life cycle of the Space Station Freedom (SSF) with increased performance and functionality are described.

Optical protocols for advanced spacecraft networks

Science.gov (United States)

Bergman, Larry A.

1991-09-01

Most present day fiber optic networks are in fact extensions of copper wire networks. As a result, their speed is still limited by electronics even though optics is capable of running three orders of magnitude faster. Also, the fact that photons do not interact with one another (as electrons do) provides optical communication systems with some unique properties or new functionality that is not readily taken advantage of with conventional approaches. Some of the motivation for implementing network protocols in the optical domain, a few possible approaches including optical code-division multiple-access (CDMA), and how this class of networks can extend the technology life cycle of the Space Station Freedom (SSF) with increased performance and functionality are described.

Scoping Electronic Communication Privacy Rules: Data, Services and Values

NARCIS (Netherlands)

van Hoboken, J.; Zuiderveen Borgesius, F.

2015-01-01

We use electronic communication networks for more than simply traditional telecommunications: we access the news, buy goods online, file our taxes, contribute to public debate, and more. As a result, a wider array of privacy interests is implicated for users of electronic communications networks and

Local Area Networks (The Printout).

Science.gov (United States)

Aron, Helen; Balajthy, Ernest

1989-01-01

Describes the Local Area Network (LAN), a project in which students used LAN-based word processing and electronic mail software as the center of a writing process approach. Discusses the advantages and disadvantages of networking. (MM)

Effective professional networking.

Science.gov (United States)

Goolsby, Mary Jo; Knestrick, Joyce M

2017-08-01

The reasons for nurse practitioners to develop a professional network are boundless and are likely to change over time. Networking opens doors and creates relationships that support new opportunities, personal development, collaborative research, policy activism, evidence-based practice, and more. Successful professional networking involves shared, mutually beneficial interactions between individuals and/or individuals and groups, regardless of whether it occurs face to face or electronically. This article combines nuggets from the literature with guidance based on the authors' combined experience in networking activities at the local, national, and international levels. ©2017 American Association of Nurse Practitioners.

Optimal pinnate leaf-like network/matrix structure for enhanced conductive cooling

International Nuclear Information System (INIS)

Hu, Liguo; Zhou, Han; Zhu, Hanxing; Fan, Tongxiang; Zhang, Di

2015-01-01

Highlights: • We present a pinnate leaf-like network/matrix structure for conductive cooling. • We study the effect of matrix thickness on network conductive cooling performance. • Matrix thickness determines optimal distance between collection channels in network. • We determine the optimal network architecture from a global perspective. • Optimal network greatly reduces the maximum temperature difference in the network. - Abstract: Heat generated in electronic devices has to be effectively removed because excessive temperature strongly impairs their performance and reliability. Embedding a high thermal conductivity network into an electronic device is an effective method to conduct the generated heat to the outside. In this study, inspired by the pinnate leaf, we present a pinnate leaf-like network embedded in the matrix (i.e., electronic device) to cool the matrix by conduction and develop a method to construct the optimal network. In this method, we first investigate the effect of the matrix thickness on the conductive cooling performance of the network, and then optimize the network architecture from a global perspective so that to minimize the maximum temperature difference between the heat sink and the matrix. The results indicate that the matrix thickness determines the optimal distance of the neighboring collection channels in the network, which minimizes the maximum temperature difference between the matrix and the network, and that the optimal network greatly reduces the maximum temperature difference in the network. The results can serve as a design guide for efficient conductive cooling of electronic devices

Theory and design of broadband matching networks applied electricity and electronics

CERN Document Server

Chen, Wai-Kai

1976-01-01

Theory and Design of Broadband Matching Networks centers on the network theory and its applications to the design of broadband matching networks and amplifiers. Organized into five chapters, this book begins with a description of the foundation of network theory. Chapter 2 gives a fairly complete exposition of the scattering matrix associated with an n-port network. Chapter 3 considers the approximation problem along with a discussion of the approximating functions. Chapter 4 explains the Youla's theory of broadband matching by illustrating every phase of the theory with fully worked out examp

Client perceptions of the mental health engagement network: a qualitative analysis of an electronic personal health record.

Science.gov (United States)

Forchuk, Cheryl; Reiss, Jeffrey P; O'Regan, Tony; Ethridge, Paige; Donelle, Lorie; Rudnick, Abraham

2015-10-14

Information technologies such as websites, mobile phone applications, and virtual reality programs have been shown to deliver innovative and effective treatments for mental illness. Much of the research studying electronic mental health interventions focuses on symptom reduction; however, to facilitate the implementation of electronic interventions in usual mental health care, it is also important to investigate the perceptions of clients who will be using the technologies. To this end, a qualitative analysis of focus group discussions regarding the Mental Health Engagement Network, a web-based personal health record and smartphone intervention, is presented here. Individuals living in the community with a mood or psychotic disorder (n = 394) were provided with a smartphone and access to an electronic personal health record, the Lawson SMART Record, for 12 to 18 months to manage their mental health. This study employed a delayed-implementation design and obtained both quantitative and qualitative data through individual interviews and focus group sessions. Participants had the opportunity to participate in voluntary focus group sessions at three points throughout the study to discuss their perceptions of the technologies. Qualitative data from 95 focus group participants were analysed using a thematic analysis. Four overarching themes emerged from focus group discussions: 1) Versatile functionality of the Lawson SMART Record and smartphone facilitated use; 2) Aspects of the technologies as barriers to use; 3) Use of the Mental health Engagement Network technologies resulted in perceived positive outcomes; 4) Future enhancement of the Lawson SMART Record and intervention is recommended. These qualitative data provide a valuable contribution to the understanding of how smarttechnologies can be integrated into usual mental health care. Smartphones are extremely portable andcommonplace in society. Therefore, clients can use these devices to manage and track mental

Digital simulation of power electronic systems

International Nuclear Information System (INIS)

Mehring, P.; Jentsch, W.; John, G.; Kraemer, D.

1981-01-01

The following paper contains the final report on the NETSIM-Project. The purpose of this project is to develop a special digital simulation system, which could serve as a base for routine application of simulation in planning and development of power electronic systems. The project is realized in two steps. First a basic network analysis system is established. With this system the basic models and methods in treating power electronic networks could be probed. The resulting system is then integrated into a general digital simulation system for continous systems (CSSL-System). This integrated simulation system allows for convenient modeling and simulation of power electronic systems. (orig.) [de

Dynamic Pricing in Electronic Commerce Using Neural Network

Science.gov (United States)

Ghose, Tapu Kumar; Tran, Thomas T.

In this paper, we propose an approach where feed-forward neural network is used for dynamically calculating a competitive price of a product in order to maximize sellers’ revenue. In the approach we considered that along with product price other attributes such as product quality, delivery time, after sales service and seller’s reputation contribute in consumers purchase decision. We showed that once the sellers, by using their limited prior knowledge, set an initial price of a product our model adjusts the price automatically with the help of neural network so that sellers’ revenue is maximized.

Using Electronic Mail to Conduct Survey Research.

Science.gov (United States)

Thach, Liz

1995-01-01

Describes public and private online networks and the characteristics of electronic mail. Reviews the literature on survey research conducted via electronic mail, and examines the issues of design, implementation, and response. A table displays advantages and disadvantages of electronic mail surveys. (AEF)

Network frontier as a metaphor and myth

Directory of Open Access Journals (Sweden)

N V Plotichkina

2017-12-01

Full Text Available This article considers spatial metaphors of the Internet and the possibility to extrapolate the frontier thesis of F. Turner on the electronic space. The authors believe that information and communication technologies and the digital world have become new spaces for the expansion of states or individuals. That is why there are ongoing scientific debates on the limits and potential of western and electronic frontiers’ metaphors for analytical description of the digital space. The metaphor of the Internet as a western frontier is quite controversial; many authors prefer the electronic frontier analogy as more heuristic and valid for constructing metaphors of the digital reality. The network frontier is defined as a dynamic, elastic and permeable border of social and cultural practices of the network society. The authors estimate the heuristic potential of the concept ‘network frontier’ developed on the basis of integration of the frontier theory and the concept ‘network society’, taking into account the effects of globalization for the study of elastic, permeable and movable border of the network landscape. In the digital world, the spatiality transforms, the geography of the Internet network determines the metamorphosis of the frontier as a contact zone between online and offline spaces, which is dynamic, innovative, encourages mobility, and its permeability depends on the digital competence of citizens. The authors explain the mythology of western and electronic frontier; name the main network frontier myths related to the rhetoric of western frontier myth; describe the main components of the western frontier myth associated with the idea of American exceptionalism; and conclude with the identification of nowadays myths about frontier-men and the online space they master.

500 MHz narrowband beam position monitor electronics for electron synchrotrons

International Nuclear Information System (INIS)

Mohos, I.; Dietrich, J.

1998-01-01

Narrowband beam position monitor electronics were developed in the Forschungszentrum Juelich-IKP for the orbit measurement equipment used at ELSA Bonn. The equipment uses 32 monitor chambers, each with four capacitive button electrodes. The monitor electronics, consisting of an rf signal processing module (BPM-RF) and a data acquisition and control module (BPM-DAQ), sequentially process and measure the monitor signals and deliver calculated horizontal and vertical beam position data via a serial network

500 MHz narrowband beam position monitor electronics for electron synchrotrons

Science.gov (United States)

Mohos, I.; Dietrich, J.

1998-12-01

Narrowband beam position monitor electronics were developed in the Forschungszentrum Jülich-IKP for the orbit measurement equipment used at ELSA Bonn. The equipment uses 32 monitor chambers, each with four capacitive button electrodes. The monitor electronics, consisting of an rf signal processing module (BPM-RF) and a data acquisition and control module (BPM-DAQ), sequentially process and measure the monitor signals and deliver calculated horizontal and vertical beam position data via a serial network.

Kajian Literatur Sinkronisasi Waktu Dengan Network Time Protocol Untuk Pemantauan Aktivitas Jaringan Telekomunikasi

Directory of Open Access Journals (Sweden)

Ahmad Budi Setiawan

2015-12-01

Abstract Network providers are providing services or networks that enable the implementation of electronic transactions. Each network operator is required to align the time in electronic transactions. The purpose is to provide time alignment of the time standard and provide a time frame for all forms of electronic transactions with the principles of accuracy and traceability. Indonesian Time Alignment System uses the principle of traceability and accuracy principles. The protocols used in the alignment of the time server in Indonesia-based Network Time Protocol. This study discusses the implementation of time synchronization with a network time protocol as a form of telecommunications network security monitoring. The method used in this study is a descriptive narrative on the implementation of time synchronization. Results of this study are input to the policy in the security of electronic transactions through time synchronization

An optimized electronic device for solar power harvesting dedicated to wireless sensor networks

Energy Technology Data Exchange (ETDEWEB)

Le Cam, Vincent; Le Maulf, Regis; Lemarchand, Laurent; Martin, William; Le Pen, Mathieu [LUNAM Univ., Bouguenais (France). IFSTTAR, MACS Dept.

2012-07-01

For economics as for practical reasons, this last decade, the use and dissemination of wireless sensor networks (WSN) became obvious; particularly in structural heath monitoring (SHM) use-cases where distances between sensors could be long and access to the structure quite difficult. Even if efforts are leaded to design small components and RF modules that ask for low-power, the need of an external source is often necessary. After have acquired knowledge in solar cells as in batteries technologies and methods to control charge/discharge phases as in optimizing algorithms, IFSTTAR laboratory has designed an electronic device that integrates those progress. This electronic device has a quite generic mission: for a panel of batteries chemistry (Lithium, NiMh) and a panel of solar cells sources (frome mW to some W), the system acts as an improved battery charger whatever the load ask for power. The system applies control algorithms based on battery capacity and chemistry profile. It also applies the MPPT (Maximum Power Point Tracking) algorithm. At any time, battery State Of Charge (SOC) can be requested via I2C bus as well as a warning signal is output when SOC becomes critical. Through standard pin connectors and a simple I2C interface, the system can be used by many wireless devices (sensors) that have to run autonomously. After the presentation of this system, a focus on its application on a real use-case will be given. (orig.)

Integrated Circuit Chip Improves Network Efficiency

Science.gov (United States)

2008-01-01

Prior to 1999 and the development of SpaceWire, a standard for high-speed links for computer networks managed by the European Space Agency (ESA), there was no high-speed communications protocol for flight electronics. Onboard computers, processing units, and other electronics had to be designed for individual projects and then redesigned for subsequent projects, which increased development periods, costs, and risks. After adopting the SpaceWire protocol in 2000, NASA implemented the standard on the Swift mission, a gamma ray burst-alert telescope launched in November 2004. Scientists and developers on the James Webb Space Telescope further developed the network version of SpaceWire. In essence, SpaceWire enables more science missions at a lower cost, because it provides a standard interface between flight electronics components; new systems need not be custom built to accommodate individual missions, so electronics can be reused. New protocols are helping to standardize higher layers of computer communication. Goddard Space Flight Center improved on the ESA-developed SpaceWire by enabling standard protocols, which included defining quality of service and supporting plug-and-play capabilities. Goddard upgraded SpaceWire to make the routers more efficient and reliable, with features including redundant cables, simultaneous discrete broadcast pulses, prevention of network blockage, and improved verification. Redundant cables simplify management because the user does not need to worry about which connection is available, and simultaneous broadcast signals allow multiple users to broadcast low-latency side-band signal pulses across the network using the same resources for data communication. Additional features have been added to the SpaceWire switch to prevent network blockage so that more robust networks can be designed. Goddard s verification environment for the link-and-switch implementation continuously randomizes and tests different parts, constantly anticipating

High electron mobility through the edge states in random networks of c-axis oriented wedge-shaped GaN nanowalls grown by molecular beam epitaxy

International Nuclear Information System (INIS)

Bhasker, H. P.; Dhar, S.; Sain, A.; Kesaria, Manoj; Shivaprasad, S. M.

2012-01-01

Transport and optical properties of random networks of c-axis oriented wedge-shaped GaN nanowalls grown spontaneously on c-plane sapphire substrates through molecular beam epitaxy are investigated. Our study suggests a one dimensional confinement of carriers at the top edges of these connected nanowalls, which results in a blue shift of the band edge luminescence, a reduction of the exciton-phonon coupling, and an enhancement of the exciton binding energy. Not only that, the yellow luminescence in these samples is found to be completely suppressed even at room temperature. All these changes are highly desirable for the enhancement of the luminescence efficiency of the material. More interestingly, the electron mobility through the network is found to be significantly higher than that is typically observed for GaN epitaxial films. This dramatic improvement is attributed to the transport of electrons through the edge states formed at the top edges of the nanowalls.

Electronic network for monitoring travellers' diarrhoea and detection of an outbreak caused by Salmonella enteritidis among overseas travellers.

Science.gov (United States)

Osaka, K; Inouye, S; Okabe, N; Taniguchi, K; Izumiya, H; Watanabe, H; Matsumoto, Y; Yokota, T; Hashimoto, S; Sagara, H

1999-12-01

The Traveller's Diarrhoea Network, by which the Infectious Disease Surveillance Center is electronically connected with two major airport quarantine stations and three infectious disease hospitals, was launched in February 1988 in Japan. The data on travellers' diarrhoea detected is reported weekly by e-mail. Two clusters of infection among travellers returning from Italy were reported by two airport quarantine stations at the end of September 1998. A total of 12 salmonella isolates from 2 clusters were examined. All were identified as Salmonella enteritidis, phage type 4 and showed identical banding patterns on pulsed-field gel electrophoresis. A case-control study showed that the scrambled eggs served at the hotel restaurant in Rome were the likely source of this outbreak. This outbreak could not have been detected promptly and investigated easily without the e-mail network. International exchange of data on travellers' diarrhoea is important for preventing and controlling food-borne illnesses infected abroad.

Artificial neural networks for plasma spectroscopy analysis

International Nuclear Information System (INIS)

Morgan, W.L.; Larsen, J.T.; Goldstein, W.H.

1992-01-01

Artificial neural networks have been applied to a variety of signal processing and image recognition problems. Of the several common neural models the feed-forward, back-propagation network is well suited for the analysis of scientific laboratory data, which can be viewed as a pattern recognition problem. The authors present a discussion of the basic neural network concepts and illustrate its potential for analysis of experiments by applying it to the spectra of laser produced plasmas in order to obtain estimates of electron temperatures and densities. Although these are high temperature and density plasmas, the neural network technique may be of interest in the analysis of the low temperature and density plasmas characteristic of experiments and devices in gaseous electronics

MiTAP for SARS Detection

National Research Council Canada - National Science Library

Damianos, Laurie E; Bayer, Samuel; Chisholm, Michael A; Henderson, John; Hirschman, Lynette; Morgan, William; Ubaldino, Marc; Zarrella, Guido; Wilson, V, James M; Polyak, Marat G

2006-01-01

.... Specialized newsgroups and customizable filters or searches on incoming stories allow users to create their own view into the data while a variety of tools summarize, indicate trends, and provide alerts to potentially relevant spikes of activity.

NAFFS: network attached flash file system for cloud storage on portable consumer electronics

Science.gov (United States)

Han, Lin; Huang, Hao; Xie, Changsheng

Cloud storage technology has become a research hotspot in recent years, while the existing cloud storage services are mainly designed for data storage needs with stable high speed Internet connection. Mobile Internet connections are often unstable and the speed is relatively low. These native features of mobile Internet limit the use of cloud storage in portable consumer electronics. The Network Attached Flash File System (NAFFS) presented the idea of taking the portable device built-in NAND flash memory as the front-end cache of virtualized cloud storage device. Modern portable devices with Internet connection have built-in more than 1GB NAND Flash, which is quite enough for daily data storage. The data transfer rate of NAND flash device is much higher than mobile Internet connections[1], and its non-volatile feature makes it very suitable as the cache device of Internet cloud storage on portable device, which often have unstable power supply and intermittent Internet connection. In the present work, NAFFS is evaluated with several benchmarks, and its performance is compared with traditional network attached file systems, such as NFS. Our evaluation results indicate that the NAFFS achieves an average accessing speed of 3.38MB/s, which is about 3 times faster than directly accessing cloud storage by mobile Internet connection， and offers a more stable interface than that of directly using cloud storage API. Unstable Internet connection and sudden power off condition are tolerable, and no data in cache will be lost in such situation.

Adsorbates in a Box: Titration of Substrate Electronic States

Science.gov (United States)

Cheng, Zhihai; Wyrick, Jonathan; Luo, Miaomiao; Sun, Dezheng; Kim, Daeho; Zhu, Yeming; Lu, Wenhao; Kim, Kwangmoo; Einstein, T. L.; Bartels, Ludwig

2010-08-01

Nanoscale confinement of adsorbed CO molecules in an anthraquinone network on Cu(111) with a pore size of ≈4nm arranges the CO molecules in a shell structure that coincides with the distribution of substrate confined electronic states. Molecules occupy the states approximately in the sequence of rising electron energy. Despite the sixfold symmetry of the pore boundary itself, the adsorbate distribution adopts the threefold symmetry of the network-substrate system, highlighting the importance of the substrate even for such quasi-free-electron systems.

Introduction to electronic engineering I

International Nuclear Information System (INIS)

Kim, Bong Ryeol; Park, Han Gue; Lee, Tae Won; Choi, Gap Seok

1979-09-01

It deals with basic element of electronic engineering, which are an electric network such as alternating current voltage, distributed self, energy and power of an AC circuit, matrix, Tie-set and Cut-set, Fourier Transform and Laplace Transform, electromagnetics with vector theory, dot product and cross product, gradient, divergence static electricity, dielectric substance and capacity, boundary condition, resistance, magnetic field, magnetic circuit and electromagnetic field, electronic circuit including power circuit, amplification circuit, modulation and digital circuit, physical electronic engineering about movement of electron, semiconductor and integrated circuit.

Deep learning and the electronic structure problem

Science.gov (United States)

Mills, Kyle; Spanner, Michael; Tamblyn, Isaac

In the past decade, the fields of artificial intelligence and computer vision have progressed remarkably. Supported by the enthusiasm of large tech companies, as well as significant hardware advances and the utilization of graphical processing units to accelerate computations, deep neural networks (DNN) are gaining momentum as a robust choice for many diverse machine learning applications. We have demonstrated the ability of a DNN to solve a quantum mechanical eigenvalue equation directly, without the need to compute a wavefunction, and without knowledge of the underlying physics. We have trained a convolutional neural network to predict the total energy of an electron in a confining, 2-dimensional electrostatic potential. We numerically solved the one-electron Schrödinger equation for millions of electrostatic potentials, and used this as training data for our neural network. Four classes of potentials were assessed: the canonical cases of the harmonic oscillator and infinite well, and two types of randomly generated potentials for which no analytic solution is known. We compare the performance of the neural network and consider how these results could lead to future advances in electronic structure theory.

Nanotubes on Display: How Carbon Nanotubes Can Be Integrated into Electronic Displays

KAUST Repository

Opatkiewicz, Justin; LeMieux, Melburne C.; Bao, Zhenan

2010-01-01

Random networks of single-walled carbon nanotubes show promise for use in the field of flexible electronics. Nanotube networks have been difficult to utilize because of the mixture of electronic types synthesized when grown. A variety of separation

Electronic devices and circuits

CERN Document Server

Pridham, Gordon John

1968-01-01

Electronic Devices and Circuits, Volume 1 deals with the design and applications of electronic devices and circuits such as passive components, diodes, triodes and transistors, rectification and power supplies, amplifying circuits, electronic instruments, and oscillators. These topics are supported with introductory network theory and physics. This volume is comprised of nine chapters and begins by explaining the operation of resistive, inductive, and capacitive elements in direct and alternating current circuits. The theory for some of the expressions quoted in later chapters is presented. Th

Happy birthday WWW: the web is now old enough to drive

CERN Document Server

Gilbertson, Scott

2007-01-01

"The World Wide Web can now drive. Sixteen years ago yeterday, in a short post to the alt.hypertext newsgroup, tim Berners-Lee revealed the first public web pages summarizing his World Wide Web project." (1/4 page)

Evaluation of coffee roasting degree by using electronic nose and artificial neural network for off-line quality control.

Science.gov (United States)

Romani, Santina; Cevoli, Chiara; Fabbri, Angelo; Alessandrini, Laura; Dalla Rosa, Marco

2012-09-01

An electronic nose (EN) based on an array of 10 metal oxide semiconductor sensors was used, jointly with an artificial neural network (ANN), to predict coffee roasting degree. The flavor release evolution and the main physicochemical modifications (weight loss, density, moisture content, and surface color: L*, a*), during the roasting process of coffee, were monitored at different cooking times (0, 6, 8, 10, 14, 19 min). Principal component analysis (PCA) was used to reduce the dimensionality of sensors data set (600 values per sensor). The selected PCs were used as ANN input variables. Two types of ANN methods (multilayer perceptron [MLP] and general regression neural network [GRNN]) were used in order to estimate the EN signals. For both neural networks the input values were represented by scores of sensors data set PCs, while the output values were the quality parameter at different roasting times. Both the ANNs were able to well predict coffee roasting degree, giving good prediction results for both roasting time and coffee quality parameters. In particular, GRNN showed the highest prediction reliability. Actually the evaluation of coffee roasting degree is mainly a manned operation, substantially based on the empirical final color observation. For this reason it requires well-trained operators with a long professional skill. The coupling of e-nose and artificial neural networks (ANNs) may represent an effective possibility to roasting process automation and to set up a more reproducible procedure for final coffee bean quality characterization. © 2012 Institute of Food Technologists®

International Conference on NextGen Electronic Technologies

CERN Document Server

Thalmann, Nadia; Bhaaskaran, V

2017-01-01

This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

THE UTILIZATION OF WEB-BASED TECHNOLOGY AS PREDICTOR OF FACULTY INSIGHTS OF SUPPORT FOR THE IMPLEMENTATION OF ELEARNING

Directory of Open Access Journals (Sweden)

Hamed GHAEMI

2011-01-01

Full Text Available For the last three decades higher education institutions have been forced to undergo thorough transformation and revitalization. Parallel to society, a factor that has played a crucial role in transforming higher education is the advance of information technology (IT. The potential for use of IT in education has been increasingly recognized and higher education faculties have begun to use this technology in different ways in their teaching. Instructors today regularly include electronic technologies that extend instructional resources to their students: threaded discussion boards, websites, chat rooms, email, newsgroups, etc. Moreover, because the use of mobile technologies that join with web-based resources is becoming a more common practice, the lines differentiating web-based and face-to-face classroom teaching are becoming less distinguishable.

Gigabit network technology. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Davenport, C.M.C. [ed.

1996-10-01

Current digital networks are evolving toward distributed multimedia with a wide variety of applications with individual data rates ranging from kb/sec to tens and hundreds of Mb/sec. Link speed requirements are pushing into the Gb/sec range and beyond the envelop of electronic networking capabilities. There is a vast amount of untapped bandwidth available in the low-attenuation communication bands of an optical fiber. The capacity in one fiber thread is enough to carry more than two thousand times as much information as all the current radio and microwave frequencies. And while fiber optics has replaced copper wire as the transmission medium of choice, the communication capacity of conventional fiber optic networks is ultimately limited by electronic processing speeds.

Tourist destination branding on social networks

Directory of Open Access Journals (Sweden)

Radenković-Šošić Bojana

2012-06-01

Full Text Available Social networks have become the modern means of communication. Intensive electronic word of mouth to mouth (eWOM leads to faster sharing of experiences, and the creation of positive and negative attitudes. On the other hand, branding of tourist destinations has become one of the most powerful resources in the implementation of marketing strategies in tourism. The aim of this study, which is based on primary research, is to examine the concept of electronic word of mouth, as well as the role of social networks in the process of branding tourist destinations.

Optical network and FPGA/DSP based control system for free electron laser

International Nuclear Information System (INIS)

Romaniuk, R.S.; Pozniak, K.T.; Czarski, T.; Czuba, K.; Giergusiewicz, W.; Kasprowicz, G.; Koprek, W.

2005-01-01

The work presents a structural and functional model of a distributed low level radio frequency (LLRF) control, diagnostic and telemetric system for a large industrial object. An example of system implementation is the European TESLA-XFEL accelerator. The free electron laser is expected to work in the VUV region now and in the range of X-rays in the future. The design of a system based on the FPGA circuits and multi-gigabit optical network is discussed. The system design approach is fully parametric. The major emphasis is put on the methods of the functional and hardware concentration to use fully both: a very big transmission capacity of the optical fiber telemetric channels and very big processing power of the latest series of DSP/PC enhanced and optical I/O equipped, FPGA chips. The subject of the work is the design of a universal, laboratory module of the LLRF sub-system. The current parameters of the system model, under the design, are presented. The considerations are shown on the background of the system application in the hostile industrial environment. The work is a digest of a few development threads of the hybrid, optoelectronic, telemetric networks (HOTN). In particular, the outline of construction theory of HOTN node was presented as well as the technology of complex, modular, multilayer HOTN system PCBs. The PCBs contain critical sub-systems of the node and the network. The presented exemplary sub-systems are: fast optical data transmission of 2.5 Gbit/s, 3.125 Gbit/s and 10 Gbit/s; fast A/C and C/A multichannel data conversion managed by FPGA chip (40 MHz, 65 MHz, 105 MHz), data and functionality concentration, integration of floating point calculations in the DSP units of FPGA circuit, using now discrete and next integrated PC chip with embedded OS; optical distributed timing system of phase reference; and 1GbEth video interface (over UTP or FX) for CCD telemetry and monitoring. The data and functions concentration in the HOTN node is necessary to

Nuclear Physics (Education) on the Web

International Nuclear Information System (INIS)

Bar-Noy, T.

1999-01-01

The Web has long became an important source of information for researchers and educators. In the present paper we will shed some light on its main resources: Newsgroups, Mailing lists, Catalogs, Research- and Education-oriented Web-sites, and (Java) simulations

Optical multicast system for data center networks.

Science.gov (United States)

Samadi, Payman; Gupta, Varun; Xu, Junjie; Wang, Howard; Zussman, Gil; Bergman, Keren

2015-08-24

We present the design and experimental evaluation of an Optical Multicast System for Data Center Networks, a hardware-software system architecture that uniquely integrates passive optical splitters in a hybrid network architecture for faster and simpler delivery of multicast traffic flows. An application-driven control plane manages the integrated optical and electronic switched traffic routing in the data plane layer. The control plane includes a resource allocation algorithm to optimally assign optical splitters to the flows. The hardware architecture is built on a hybrid network with both Electronic Packet Switching (EPS) and Optical Circuit Switching (OCS) networks to aggregate Top-of-Rack switches. The OCS is also the connectivity substrate of splitters to the optical network. The optical multicast system implementation requires only commodity optical components. We built a prototype and developed a simulation environment to evaluate the performance of the system for bulk multicasting. Experimental and numerical results show simultaneous delivery of multicast flows to all receivers with steady throughput. Compared to IP multicast that is the electronic counterpart, optical multicast performs with less protocol complexity and reduced energy consumption. Compared to peer-to-peer multicast methods, it achieves at minimum an order of magnitude higher throughput for flows under 250 MB with significantly less connection overheads. Furthermore, for delivering 20 TB of data containing only 15% multicast flows, it reduces the total delivery energy consumption by 50% and improves latency by 55% compared to a data center with a sole non-blocking EPS network.

Implementation of Networking-by-Touch to Small Unit, Network-Enabled Operations

Science.gov (United States)

2010-09-01

consumer electronics and wearable devices etc., which are further exploit later in the chapter. 4 . Touch The body’s sense of touch is a potentially...consoles including Sony’s Playstation 2, Nintendo’s GameCube and Wii, and Microsoft’s X-Box and X-box 360. 56 6. Tactile Displays Embedded in Consumer ...2010 3. REPORT TYPE AND DATES COVERED Master’s Thesis 4 . TITLE AND SUBTITLE Implementation of Networking-by-Touch to Small Unit, Network-Enabled

Wintelism and Production Networks in the Electronics Industry

NARCIS (Netherlands)

van de Gevel, A.J.W.

1997-01-01

This paper deals with two interrelated elements of globalization: Wintelism and cross national production networks which have been underexposed in discussions about globalization.Wintelism refers to the shift in competition away from final assembly and vertical control of markets by final assemblers

Water network-mediated, electron-induced proton transfer in [C{sub 5}H{sub 5}N ⋅ (H{sub 2}O){sub n}]{sup −} clusters

Energy Technology Data Exchange (ETDEWEB)

DeBlase, Andrew F.; Wolke, Conrad T.; Johnson, Mark A., E-mail: jordan@pitt.edu, E-mail: nhammer@olemiss.edu, E-mail: mark.johnson@yale.edu [Department of Chemistry, Yale University, P.O. Box 208107, New Haven, Connecticut 06520 (United States); Weddle, Gary H. [Department of Chemistry, Yale University, P.O. Box 208107, New Haven, Connecticut 06520 (United States); Department of Chemistry, Fairfield University, 1073 North Benson Road, Fairfield, Connecticut 06824 (United States); Archer, Kaye A.; Jordan, Kenneth D., E-mail: jordan@pitt.edu, E-mail: nhammer@olemiss.edu, E-mail: mark.johnson@yale.edu [Department of Chemistry, University of Pittsburgh, 219 Parkman Avenue, Pittsburgh, Pennsylvania 15260 (United States); Kelly, John T.; Tschumper, Gregory S.; Hammer, Nathan I., E-mail: jordan@pitt.edu, E-mail: nhammer@olemiss.edu, E-mail: mark.johnson@yale.edu [Department of Chemistry and Biochemistry, University of Mississippi, University, Mississippi 38677 (United States)

2015-10-14

The role of proton-assisted charge accommodation in electron capture by a heterocyclic electron scavenger is investigated through theoretical analysis of the vibrational spectra of cold, gas phase [Py ⋅ (H{sub 2}O){sub n=3−5}]{sup −} clusters. These radical anions are formed when an excess electron is attached to water clusters containing a single pyridine (Py) molecule in a supersonic jet ion source. Under these conditions, the cluster ion distribution starts promptly at n = 3, and the photoelectron spectra, combined with vibrational predissociation spectra of the Ar-tagged anions, establish that for n > 3, these species are best described as hydrated hydroxide ions with the neutral pyridinium radical, PyH{sup (0)}, occupying one of the primary solvation sites of the OH{sup −}. The n = 3 cluster appears to be a special case where charge localization on Py and hydroxide is nearly isoenergetic, and the nature of this species is explored with ab initio molecular dynamics calculations of the trajectories that start from metastable arrangements of the anion based on a diffuse, essentially dipole-bound electron. These calculations indicate that the reaction proceeds via a relatively slow rearrangement of the water network to create a favorable hydration configuration around the water molecule that eventually donates a proton to the Py nitrogen atom to yield the product hydroxide ion. The correlation between the degree of excess charge localization and the evolving shape of the water network revealed by this approach thus provides a microscopic picture of the “solvent coordinate” at the heart of a prototypical proton-coupled electron transfer reaction.

Use of neural network techniques to identify cosmic ray electrons and positrons during the 1993 balloon flight of the NMSU/Wizard-TS93 instrument

Energy Technology Data Exchange (ETDEWEB)

Bellotti, R.; Castellano, M. [Bari Univ. (Italy)]|[INFN, Bari (Italy); Candusso, M.; Casolino, M.; Morselli, A.; Picozza, P. [Rome Univ. `Tor Vergata` (Italy)]|[INFN, Rome (Italy); Aversa, F.; Boezio, M. [Trieste Univ. (Italy)]|[INFN, Trieste (Italy); Barbiellini, G. [Trieste Univ. (Italy)]|[INFN, Trieste (Italy); Basini, G. [INFN, Laboratori Nazionali di Frascati, Rome (Italy)

1995-09-01

The detectors used in the TS93 balloon flight produced a large volume of information for each cosmic ray trigger. Some of the data was visual in nature, other portions contained energy deposition and timing information. The data sets are amenable to conventional analysis techniques but there is no assurance that conventional techniques make full use of subtle correlations and relations amongst the detector responses. With the advent of neural network technologies, particularly adept at classification of complex phenomena, it would seem appropriate to explore the utility of neural network techniques to classify particles observed with the instruments. In this paper neural network based methodology for signal/background discrimination in a cosmic ray space experiment is discussed. Results are presented for electron and positron classification in the TS93 flight data set and will be compared to conventional analyses.

Determination of Electron Optical Properties for Aperture Zoom Lenses Using an Artificial Neural Network Method.

Science.gov (United States)

Isik, Nimet

2016-04-01

Multi-element electrostatic aperture lens systems are widely used to control electron or charged particle beams in many scientific instruments. By means of applied voltages, these lens systems can be operated for different purposes. In this context, numerous methods have been performed to calculate focal properties of these lenses. In this study, an artificial neural network (ANN) classification method is utilized to determine the focused/unfocused charged particle beam in the image point as a function of lens voltages for multi-element electrostatic aperture lenses. A data set for training and testing of ANN is taken from the SIMION 8.1 simulation program, which is a well known and proven accuracy program in charged particle optics. Mean squared error results of this study indicate that the ANN classification method provides notable performance characteristics for electrostatic aperture zoom lenses.

Spatial anomaly detection in sensor networks using neighborhood information

NARCIS (Netherlands)

Bosman, H.H.W.J.; Iacca, G.; Tejada, A.; Wörtche, H.J.; Liotta, A.

2016-01-01

The field of wireless sensor networks (WSNs), embedded systems with sensing and networking capabil- ity, has now matured after a decade-long research effort and technological advances in electronics and networked systems. An important remaining challenge now is to extract meaningful information from

Spatial anomaly detection in sensor networks using neighborhood information

NARCIS (Netherlands)

Bosman, H.H.W.J.; Iacca, G.; Tejada, A.; Wörtche, H.J.; Liotta, A.

The field of wireless sensor networks (WSNs), embedded systems with sensing and networking capability, has now matured after a decade-long research effort and technological advances in electronics and networked systems. An important remaining challenge now is to extract meaningful information from

Neural networks for triggering

International Nuclear Information System (INIS)

Denby, B.; Campbell, M.; Bedeschi, F.; Chriss, N.; Bowers, C.; Nesti, F.

1990-01-01

Two types of neural network beauty trigger architectures, based on identification of electrons in jets and recognition of secondary vertices, have been simulated in the environment of the Fermilab CDF experiment. The efficiencies for B's and rejection of background obtained are encouraging. If hardware tests are successful, the electron identification architecture will be tested in the 1991 run of CDF. 10 refs., 5 figs., 1 tab

Particle identification using artificial neural networks at BESIII

International Nuclear Information System (INIS)

Qin Gang; Lv Junguang; Bian Jianming; Chinese Academy of Sciences, Beijing

2008-01-01

A multilayered perceptrons' neural network technique has been applied in the particle identification at BESIII. The networks are trained in each sub-detector level. The NN output of sub-detectors can be sent to a sequential network or be constructed as PDFs for a likelihood. Good muon-ID, electron-ID and hadron-ID are obtained from the networks by using the simulated Monte Carlo samples. (authors)

Internetcommunication in radiology

International Nuclear Information System (INIS)

Ranschaert, E.; Achenbach, S.

2000-01-01

E-mail is an Internet service that can be used for sending messages and binary files between individuals as well as for participating in discussion groups. For sending and receiving these types of messages, the users must use either a dedicated e-mail client or one of the several mailing facilities of the World Wide Web. The newsgroups enable likeminded people to discuss subjects on a group-wide basis, but access is generally not limited, and the participants cannot be selected. Conclusion: The objective of this paper is to give radiologists an introduction to using e-mail, mailing lists and newsgroups, the three most important communication services of the Internet. The function of these services is explained, and the advantages of implementing them in a radiology practice are discussed. Potential problems and concerns including security matters are highlighted, and ways in which they can be resolved are suggested. (orig.) [de

Trusted intermediating agents in electronic trade networks

NARCIS (Netherlands)

T.B. Klos (Tomas); F. Alkemade (Floortje)

2005-01-01

htmlabstract Electronic commerce and trading of information goods significantly impact the role of intermediaries: consumers can bypass intermediating agents by forming direct links to producers. One reason that traditional intermediaries can still make a profit, is that they have more knowledge of

Neural Network for Nanoscience Scanning Electron Microscope Image Recognition.

Science.gov (United States)

Modarres, Mohammad Hadi; Aversa, Rossella; Cozzini, Stefano; Ciancio, Regina; Leto, Angelo; Brandino, Giuseppe Piero

2017-10-16

In this paper we applied transfer learning techniques for image recognition, automatic categorization, and labeling of nanoscience images obtained by scanning electron microscope (SEM). Roughly 20,000 SEM images were manually classified into 10 categories to form a labeled training set, which can be used as a reference set for future applications of deep learning enhanced algorithms in the nanoscience domain. The categories chosen spanned the range of 0-Dimensional (0D) objects such as particles, 1D nanowires and fibres, 2D films and coated surfaces, and 3D patterned surfaces such as pillars. The training set was used to retrain on the SEM dataset and to compare many convolutional neural network models (Inception-v3, Inception-v4, ResNet). We obtained compatible results by performing a feature extraction of the different models on the same dataset. We performed additional analysis of the classifier on a second test set to further investigate the results both on particular cases and from a statistical point of view. Our algorithm was able to successfully classify around 90% of a test dataset consisting of SEM images, while reduced accuracy was found in the case of images at the boundary between two categories or containing elements of multiple categories. In these cases, the image classification did not identify a predominant category with a high score. We used the statistical outcomes from testing to deploy a semi-automatic workflow able to classify and label images generated by the SEM. Finally, a separate training was performed to determine the volume fraction of coherently aligned nanowires in SEM images. The results were compared with what was obtained using the Local Gradient Orientation method. This example demonstrates the versatility and the potential of transfer learning to address specific tasks of interest in nanoscience applications.

A neural network detection system for lower-hybrid cavities in electron plasma density measured by the FREJA satellite

International Nuclear Information System (INIS)

Waldemark, J.; Karlsson, Jan

1995-03-01

This paper presents a lower-hybrid cavity detection system, CDS, for measurements of electron plasma density on the FREJA satellite wave experiment. The system can reduce the amount of data to be analysed by as much as 96% and still retain more than 85% of the desired information. The CDS is a combination of a hybrid neural network, HNN and expert rules. The HNN is a Self Organizing Map, SOM, combined with a feed forward back propagation neural net, BP. The CDS can be controlled by the user to operate with various degrees of sensitivity. Maximum detection capability is as high as 95% with data reduction lowered to 85%. 10 refs

Electronics for technicians

CERN Document Server

Crane, P W

2013-01-01

Electronics for Technicians covers the basic fundamentals of electronics, including the operation of devices and circuits. The book is meant to help the technician to obtain numerical answers to actual circuit problems. This volume consists of seven chapters, the first of which introduces the reader to the basic rules for circuits containing resistive and reactive elements. Charge and discharge of a capacitor through a resistor is discussed, along with charge and discharge of an inductance through a resistance, application of sinusoidal voltages to simple networks, and series and parallel LCR

Transformational electronics are now reconfiguring

KAUST Repository

Rojas, Jhonathan Prieto; Hussain, Aftab M.; Carreno, Armando Arpys Arevalo; Foulds, I. G.; Sevilla, Galo T.; Nassar, Joanna M.; Hussain, Muhammad Mustafa

2015-01-01

enhanced electronic systems for application in entertainment, healthcare, fitness and wellness, military and manufacturing industry. Based on these novel structural designs we have developed a siliconbased network of hexagonal islands connected through

Digital networks for the image management; Las redes digitales para manejo de imagen

Energy Technology Data Exchange (ETDEWEB)

Gomez del Campo L, A. [Departamento de Radiologia e Imagen, Hospital Central Militar, Mexico D.F. (Mexico)

1999-07-01

The digital networks designed specifically for the X-ray departments in the hospitals already were found in open development at beginning the 80's decade. Actually the digital network will be present include the image generation without the necessity to use film in direct form and in its case to print it through a laser ray printers network, an electronic image file, the possibility to integrate the hospitable information system to the electronic expedient which will allow communicate radiograph electronic files and consult by satellite via the problem cases. (Author)

Application of new type of distributed multimedia databases to networked electronic museum

Science.gov (United States)

Kuroda, Kazuhide; Komatsu, Naohisa; Komiya, Kazumi; Ikeda, Hiroaki

1999-01-01

Recently, various kinds of multimedia application systems have actively been developed based on the achievement of advanced high sped communication networks, computer processing technologies, and digital contents-handling technologies. Under this background, this paper proposed a new distributed multimedia database system which can effectively perform a new function of cooperative retrieval among distributed databases. The proposed system introduces a new concept of 'Retrieval manager' which functions as an intelligent controller so that the user can recognize a set of distributed databases as one logical database. The logical database dynamically generates and performs a preferred combination of retrieving parameters on the basis of both directory data and the system environment. Moreover, a concept of 'domain' is defined in the system as a managing unit of retrieval. The retrieval can effectively be performed by cooperation of processing among multiple domains. Communication language and protocols are also defined in the system. These are used in every action for communications in the system. A language interpreter in each machine translates a communication language into an internal language used in each machine. Using the language interpreter, internal processing, such internal modules as DBMS and user interface modules can freely be selected. A concept of 'content-set' is also introduced. A content-set is defined as a package of contents. Contents in the content-set are related to each other. The system handles a content-set as one object. The user terminal can effectively control the displaying of retrieved contents, referring to data indicating the relation of the contents in the content- set. In order to verify the function of the proposed system, a networked electronic museum was experimentally built. The results of this experiment indicate that the proposed system can effectively retrieve the objective contents under the control to a number of distributed

Amigo - Ambient Intelligence for the networked home environment

NARCIS (Netherlands)

Janse, M.D.

2008-01-01

The Amigo project develops open, standardized, interoperable middleware and attractive user services for the networked home environment. Fifteen of Europe's leading companies and research organizations in mobile and home networking, software development, consumer electronics and domestic appliances

Diminishing incidence of Internet child pornographic images.

Science.gov (United States)

Bagley, Christopher

2003-08-01

Indecent images of children posted to web sites and newsgroups over a 4-yr. period were sampled. A significant decline in the number of such images posted was observed, probably accounted for by the pressure of groups opposed to the distribution of such exploitive material.

[Information exchange via internet--possibilities, limits, future].

Science.gov (United States)

Schmiedl, S; Geishauser, M; Klöppel, M; Biemer, E

1998-01-01

Today, the exchange of information in the Internet is dominated by the WWW and e-mail. Discussion groups like mailing lists and newsgroups also permit communication in groups. Information retrieval becomes a crucial challenge in using the Internet. In the field of medicine, three more aspects are of special importance: privacy, legal requirements, and the necessity of transferring large amounts of data. For these problems, today's Internet doesn't provide a sufficient solution yet. Future developments will not only improve the existing services, but also lead to fundamental changes in the transfer technologies: Safer data transfer is to be ensured by new encrypting software together with the planned transfer protocol IPv6. Introducing the new transfer mode ATM will lead to better and resource saving transmission. Computer, telephone and TV networks will grow together, resulting in convergence of media.

Nanocarbon networks for advanced rechargeable lithium batteries.

Science.gov (United States)

Xin, Sen; Guo, Yu-Guo; Wan, Li-Jun

2012-10-16

Carbon is one of the essential elements in energy storage. In rechargeable lithium batteries, researchers have considered many types of nanostructured carbons, such as carbon nanoparticles, carbon nanotubes, graphene, and nanoporous carbon, as anode materials and, especially, as key components for building advanced composite electrode materials. Nanocarbons can form efficient three-dimensional conducting networks that improve the performance of electrode materials suffering from the limited kinetics of lithium storage. Although the porous structure guarantees a fast migration of Li ions, the nanocarbon network can serve as an effective matrix for dispersing the active materials to prevent them from agglomerating. The nanocarbon network also affords an efficient electron pathway to provide better electrical contacts. Because of their structural stability and flexibility, nanocarbon networks can alleviate the stress and volume changes that occur in active materials during the Li insertion/extraction process. Through the elegant design of hierarchical electrode materials with nanocarbon networks, researchers can improve both the kinetic performance and the structural stability of the electrode material, which leads to optimal battery capacity, cycling stability, and rate capability. This Account summarizes recent progress in the structural design, chemical synthesis, and characterization of the electrochemical properties of nanocarbon networks for Li-ion batteries. In such systems, storage occurs primarily in the non-carbon components, while carbon acts as the conductor and as the structural buffer. We emphasize representative nanocarbon networks including those that use carbon nanotubes and graphene. We discuss the role of carbon in enhancing the performance of various electrode materials in areas such as Li storage, Li ion and electron transport, and structural stability during cycling. We especially highlight the use of graphene to construct the carbon conducting

Cardiac myocyte diversity and a fibroblast network in the junctional region of the zebrafish heart revealed by transmission and serial block-face scanning electron microscopy.

Science.gov (United States)

Lafontant, Pascal J; Behzad, Ali R; Brown, Evelyn; Landry, Paul; Hu, Norman; Burns, Alan R

2013-01-01

The zebrafish has emerged as an important model of heart development and regeneration. While the structural characteristics of the developing and adult zebrafish ventricle have been previously studied, little attention has been paid to the nature of the interface between the compact and spongy myocardium. Here we describe how these two distinct layers are structurally and functionally integrated. We demonstrate by transmission electron microscopy that this interface is complex and composed primarily of a junctional region occupied by collagen, as well as a population of fibroblasts that form a highly complex network. We also describe a continuum of uniquely flattened transitional cardiac myocytes that form a circumferential plate upon which the radially-oriented luminal trabeculae are anchored. In addition, we have uncovered within the transitional ring a subpopulation of markedly electron dense cardiac myocytes. At discrete intervals the transitional cardiac myocytes form contact bridges across the junctional space that are stabilized through localized desmosomes and fascia adherentes junctions with adjacent compact cardiac myocytes. Finally using serial block-face scanning electron microscopy, segmentation and volume reconstruction, we confirm the three-dimensional nature of the junctional region as well as the presence of the sheet-like fibroblast network. These ultrastructural studies demonstrate the previously unrecognized complexity with which the compact and spongy layers are structurally integrated, and provide a new basis for understanding development and regeneration in the zebrafish heart.

Controlling Underwater Robots with Electronic Nervous Systems

Directory of Open Access Journals (Sweden)

Joseph Ayers

2010-01-01

Full Text Available We are developing robot controllers based on biomimetic design principles. The goal is to realise the adaptive capabilities of the animal models in natural environments. We report feasibility studies of a hybrid architecture that instantiates a command and coordinating level with computed discrete-time map-based (DTM neuronal networks and the central pattern generators with analogue VLSI (Very Large Scale Integration electronic neuron (aVLSI networks. DTM networks are realised using neurons based on a 1-D or 2-D Map with two additional parameters that define silent, spiking and bursting regimes. Electronic neurons (ENs based on Hindmarsh–Rose (HR dynamics can be instantiated in analogue VLSI and exhibit similar behaviour to those based on discrete components. We have constructed locomotor central pattern generators (CPGs with aVLSI networks that can be modulated to select different behaviours on the basis of selective command input. The two technologies can be fused by interfacing the signals from the DTM circuits directly to the aVLSI CPGs. Using DTMs, we have been able to simulate complex sensory fusion for rheotaxic behaviour based on both hydrodynamic and optical flow senses. We will illustrate aspects of controllers for ambulatory biomimetic robots. These studies indicate that it is feasible to fabricate an electronic nervous system controller integrating both aVLSI CPGs and layered DTM exteroceptive reflexes.

Optical Neural Network Classifier Architectures

National Research Council Canada - National Science Library

Getbehead, Mark

1998-01-01

We present an adaptive opto-electronic neural network hardware architecture capable of exploiting parallel optics to realize real-time processing and classification of high-dimensional data for Air...

76 FR 76035 - Amendment to the International Traffic in Arms Regulations: Additional Method of Electronic...

Science.gov (United States)

2011-12-06

... U.S.C. Chapter 35. List of Subjects in 22 CFR Parts 122 and 129 Arms and munitions, Exports... House (ACH) and Federal Reserve Wire Network (FedWire) are electronic networks used to process financial... electronic payment. Electronic payments must be in U.S. currency and must be payable through a U.S. financial...

Nanotubes on Display: How Carbon Nanotubes Can Be Integrated into Electronic Displays

KAUST Repository

Opatkiewicz, Justin

2010-06-22

Random networks of single-walled carbon nanotubes show promise for use in the field of flexible electronics. Nanotube networks have been difficult to utilize because of the mixture of electronic types synthesized when grown. A variety of separation techniques have been developed, but few can readily be scaled up. Despite this issue, when metallic percolation pathways can be separated out or etched away, these networks serve as high-quality thinfilm transistors with impressive device characteristics. A new article in this issue illustrates this point and the promise of these materials. With more work, these devices can be implemented in transparent displays in the next generation of hand-held electronics. © 2010 American Chemical Society.

Spectrum and network measurements

CERN Document Server

Witte, Robert A

2014-01-01

This new edition of Spectrum and Network Measurements enables readers to understand the basic theory, relate it to measured results, and apply it when creating new designs. This comprehensive treatment of frequency domain measurements successfully consolidates all the pertinent theory into one text. It covers the theory and practice of spectrum and network measurements in electronic systems. It also provides thorough coverage of Fourier analysis, transmission lines, intermodulation distortion, signal-to-noise ratio and S-parameters.

Control system for JAERI Free Electron Laser

International Nuclear Information System (INIS)

Sugimoto, Masayoshi

1992-01-01

A control system comprising of the personal computers network and the CAMAC stations for the JAERI Free Electron Laser is designed and is in the development stage. It controls the equipment and analyzes the electron and optical beam experiments. The concept and the prototype of the control system are described. (author)

Advanced communication and network requirements in Europe

DEFF Research Database (Denmark)

Falch, Morten; Enemark, Rasmus

The report address diffusion of new tele-application, focusing on potential use and potential tele-trafic genrated as a consequense. The applications investigated are: Teleworking, distance learning, research and university network, applications aimed at SMEs, health networks, a trans European pu...... public administation network, city information highway, road-trafic manegement, air traffic control and electronic quotation.......The report address diffusion of new tele-application, focusing on potential use and potential tele-trafic genrated as a consequense. The applications investigated are: Teleworking, distance learning, research and university network, applications aimed at SMEs, health networks, a trans European...

Spontaneous formation of InGaN nanowall network directly on Si

Energy Technology Data Exchange (ETDEWEB)

Soto Rodriguez, P. E. D.; Kumar, Praveen; Gomez, V. J.; Alvi, N. H.; Calleja, E.; Noetzel, R. [Instituto de Sistemas Optoelectronicos y Microtecnologia (ISOM), Universidad Politecnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain); Manuel, J. M.; Morales, F. M.; Jimenez, J. J.; Garcia, R. [Dep. Ciencia de los Materiales e IM y QI., F. Ciencias, Universidad de Cadiz, 11510-Puerto Real, Cadiz (Spain)

2013-04-29

We present the study on epitaxial growth of an InGaN nanowall network directly on Si by plasma-assisted molecular beam epitaxy. Scanning electron microscopy, high-resolution X-ray diffraction, and transmission electron microscopy together with energy-dispersive X-ray analysis infer the crystalline nature of the InGaN nanowall network, oriented along the C-axis, with In composition ranging from pure GaN to 40%. Room temperature photoluminescence is observed, indicating good optical quality. The nanowall network is highly in-plane electrically conductive.

Transformational III-V Electronics

KAUST Repository

Nour, Maha A.

2014-04-01

Flexible electronics using III-V materials for nano-electronics with high electron mobility and optoelectronics with direct band gap are attractive for many applications. This thesis describes a complementary metal oxide semiconductor (CMOS) compatible process for transforming traditional III-V materials based electronics into flexible one. The thesis reports releasing 200 nm of Gallium Arsenide (GaAs) from 200 nm GaAs / 300 nm Aluminum Arsenide (AlAs) stack on GaAs substrate using diluted hydrofluoric acid (HF). This process enables releasing a single top layer compared to peeling off all layers with small sizes at the same time. This is done utilizing a network of release holes that contributes to the better transparency (45 % at 724 nm wavelengths) observed. Fabrication of metal oxide semiconductor capacitor (MOSCAPs) on GaAs is followed by releasing it to have devices on flexible 200 nm GaAs. Similarly, flexible GaSb and InP fabrication process is also reported to transform traditional electronics into large-area flexible electronics.

IT and Multimedia in Technical and Vocational Education in Malaysia.

Science.gov (United States)

Mustapha, Ramlee B.

Development of information technology (IT) and the Multimedia Super Corridor (MSC) project has placed Malaysia within the global interconnectivity along with other developed nations. Types of IT applications are e-learning, e-mail, discussion group mailing lists, bulletin board systems, chat mode, newsgroups, Internet, tutorial, hypermedia, and…

Applications of neural networks in high energy physics

International Nuclear Information System (INIS)

Cutts, D.; Hoftun, J.S.; Nesic, D.; Sornborger, A.; Johnson, C.R.; Zeller, R.T.

1990-01-01

Neural network techniques provide promising solutions to pattern recognition problems in high energy physics. We discuss several applications of back propagation networks, and in particular describe the operation of an electron algorithm based on calorimeter energies. 5 refs., 5 figs., 1 tab

Biennial report for 1982 and 1983 of Electronics Division

International Nuclear Information System (INIS)

1985-01-01

The research and development activities of the Electronics Division of the Bhabha Atomic Research Centre, Bombay during the years 1982 and 1983 is presented in the form of individual summaries arranged under the headings: reactor instrumentations, nuclear instruments, medical instrumentation, local area network, general instruments. Other activities of the Division such as servicing of electronic equipments, provision of wiring and PCB facilities to computer network and micro based systems, training etc are also decribed in brief. A list of staff-members is given at the end. (author)

Exploring a social network for sharing information about pain.

Science.gov (United States)

Alvarez, Ana Graziela; Dal Sasso, Grace T Marcon

2012-01-01

The purpose of study was to evaluate the opinion of users about the experience of sharing information about pain in a social network. An electronic survey study was conducted from September to November/2009. Nine participants assessed the social network through of an electronic questionnaire. positive aspects (easy access, organized information, interactivity, encourages the sharing of information, learning opportunity). The sharing of information contributes to the development of a collective intelligence based on exchanging experiences and knowledge sharing.

Fully printable, strain-engineered electronic wrap for customizable soft electronics.

Science.gov (United States)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-24

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Fully printable, strain-engineered electronic wrap for customizable soft electronics

Science.gov (United States)

Byun, Junghwan; Lee, Byeongmoon; Oh, Eunho; Kim, Hyunjong; Kim, Sangwoo; Lee, Seunghwan; Hong, Yongtaek

2017-03-01

Rapid growth of stretchable electronics stimulates broad uses in multidisciplinary fields as well as industrial applications. However, existing technologies are unsuitable for implementing versatile applications involving adaptable system design and functions in a cost/time-effective way because of vacuum-conditioned, lithographically-predefined processes. Here, we present a methodology for a fully printable, strain-engineered electronic wrap as a universal strategy which makes it more feasible to implement various stretchable electronic systems with customizable layouts and functions. The key aspects involve inkjet-printed rigid island (PRI)-based stretchable platform technology and corresponding printing-based automated electronic functionalization methodology, the combination of which provides fully printed, customized layouts of stretchable electronic systems with simplified process. Specifically, well-controlled contact line pinning effect of printed polymer solution enables the formation of PRIs with tunable thickness; and surface strain analysis on those PRIs leads to the optimized stability and device-to-island fill factor of strain-engineered electronic wraps. Moreover, core techniques of image-based automated pinpointing, surface-mountable device based electronic functionalizing, and one-step interconnection networking of PRIs enable customized circuit design and adaptable functionalities. To exhibit the universality of our approach, multiple types of practical applications ranging from self-computable digital logics to display and sensor system are demonstrated on skin in a customized form.

Self-assembly of an electronically conductive network through microporous scaffolds.

Science.gov (United States)

Sebastian, H Bri; Bryant, Steven L

2017-06-15

Electron transfer spanning significant distances through a microporous structure was established via the self-assembly of an electronically conductive iridium oxide nanowire matrix enveloping the pore walls. Microporous formations were simulated using two scaffold materials of varying physical and chemical properties; paraffin wax beads, and agar gel. Following infiltration into the micropores, iridium nanoparticles self-assembled at the pore wall/ethanol interface. Subsequently, cyclic voltammetry was employed to electrochemically crosslink the metal, erecting an interconnected, and electronically conductive metal oxide nanowire matrix. Electrochemical and spectral characterization techniques confirmed the formation of oxide nanowire matrices encompassing lengths of at least 1.6mm, 400× distances previously achieved using iridium nanoparticles. Nanowire matrices were engaged as biofuel cell anodes, where electrons were donated to the nanowires by a glucose oxidizing enzyme. Copyright © 2017 Elsevier Inc. All rights reserved.

Finding Multi-scale Connectivity in Our Geospace Observational System: A New Perspective for Total Electron Content Data Through Network Analysis

Science.gov (United States)

McGranaghan, R. M.; Mannucci, A. J.; Verkhoglyadova, O. P.; Malik, N.

2017-12-01

How do we evolve beyond current traditional methods in order to innovate into the future? In what disruptive innovations will the next frontier of space physics and aeronomy (SPA) be grounded? We believe the answer to these compelling, yet equally challenging, questions lies in a shift of focus: from a narrow, field-specific view to a radically inclusive, interdisciplinary new modus operandi at the intersection of SPA and the information and data sciences. Concretely addressing these broader themes, we present results from a novel technique for knowledge discovery in the magnetosphere-ionosphere-thermosphere (MIT) system: complex network analysis (NA). We share findings from the first NA of ionospheric total electron content (TEC) data, including hemispheric and interplanetary magnetic field clock angle dependencies [1]. Our work shows that NA complements more traditional approaches for the investigation of TEC structure and dynamics, by both reaffirming well-established understanding, giving credence to the method, and identifying new connections, illustrating the exciting potential. We contextualize these new results through a discussion of the potential of data-driven discovery in the MIT system when innovative data science techniques are embraced. We address implications and potentially disruptive data analysis approaches for SPA in terms of: 1) the future of the geospace observational system; 2) understanding multi-scale phenomena; and 3) machine learning. [1] McGranaghan, R. M., A. J. Mannucci, O. Verkhoglyadova, and N. Malik (2017), Finding multiscale connectivity in our geospace observational system: Network analysis of total electron content, J. Geophys. Res. Space Physics, 122, doi:10.1002/2017JA024202.

A Bayesian network model for predicting type 2 diabetes risk based on electronic health records

Science.gov (United States)

Xie, Jiang; Liu, Yan; Zeng, Xu; Zhang, Wu; Mei, Zhen

2017-07-01

An extensive, in-depth study of diabetes risk factors (DBRF) is of crucial importance to prevent (or reduce) the chance of suffering from type 2 diabetes (T2D). Accumulation of electronic health records (EHRs) makes it possible to build nonlinear relationships between risk factors and diabetes. However, the current DBRF researches mainly focus on qualitative analyses, and the inconformity of physical examination items makes the risk factors likely to be lost, which drives us to study the novel machine learning approach for risk model development. In this paper, we use Bayesian networks (BNs) to analyze the relationship between physical examination information and T2D, and to quantify the link between risk factors and T2D. Furthermore, with the quantitative analyses of DBRF, we adopt EHR and propose a machine learning approach based on BNs to predict the risk of T2D. The experiments demonstrate that our approach can lead to better predictive performance than the classical risk model.

Financial Denartments Should Quicken Steps of Electronization

Institute of Scientific and Technical Information of China (English)

无

2004-01-01

　　At 2004 China Electronic Finance Forum held in Beijing recently,Pan Xinping, Dean of Software Institute of Graduate Institute of Chinese Academy of Science appealled that China's financial departments should further quicken electronization and establish complete network electronic payment system to offer comprehensive financial service such as checking card, transference and clearance between banks, electronic securities, accounting management,transaction disposal, payment commission and service of report, and establish financial management information system. And it should finish communications between computer systems of all different professional banks, providing strong backing for the development of electronic finance in China.……

Financial Denartments Should Quicken Steps of Electronization

Institute of Scientific and Technical Information of China (English)

无

2004-01-01

@@ At 2004 China Electronic Finance Forum held in Beijing recently,Pan Xinping, Dean of Software Institute of Graduate Institute of Chinese Academy of Science appealled that China's financial departments should further quicken electronization and establish complete network electronic payment system to offer comprehensive financial service such as checking card, transference and clearance between banks, electronic securities, accounting management,transaction disposal, payment commission and service of report, and establish financial management information system. And it should finish communications between computer systems of all different professional banks, providing strong backing for the development of electronic finance in China.

Study on Network Marketing Strategies of Agricultural Products under Electronic Commerce Environment%电子商务环境下农产品网络营销策略研究

Institute of Scientific and Technical Information of China (English)

王凤旭; 贾保先

2012-01-01

从网络营销的内涵入手,分析了我国农产品网络营销面临的问题,并从移动电子商务、物联网、客户关系管理等方面提出了 农产品网络营销的创新策略.%Starting from the connotation of network marketing, problems in network marketing of agricultural products were analyzed, finally, innovation strategies on network marketing of agricultural products from the aspects of mobile electronic commerce, the Internet of Things, customer relationship management, etc. Were put forward.

Dynamics of user networks in on-line electronic auctions

Czech Academy of Sciences Publication Activity Database

Slanina, František

2014-01-01

Roč. 17, č. 1 (2014), "1450002-1"-"1450002-14" ISSN 0219-5259 R&D Projects: GA MŠk OC09078 Institutional support: RVO:68378271 Keywords : networks * random graphs * dynamics Subject RIV: BE - Theoretical Physics Impact factor: 0.968, year: 2014

Cardiac Myocyte Diversity and a Fibroblast Network in the Junctional Region of the Zebrafish Heart Revealed by Transmission and Serial Block-Face Scanning Electron Microscopy

KAUST Repository

Lafontant, Pascal J.

2013-08-23

The zebrafish has emerged as an important model of heart development and regeneration. While the structural characteristics of the developing and adult zebrafish ventricle have been previously studied, little attention has been paid to the nature of the interface between the compact and spongy myocardium. Here we describe how these two distinct layers are structurally and functionally integrated. We demonstrate by transmission electron microscopy that this interface is complex and composed primarily of a junctional region occupied by collagen, as well as a population of fibroblasts that form a highly complex network. We also describe a continuum of uniquely flattened transitional cardiac myocytes that form a circumferential plate upon which the radially-oriented luminal trabeculae are anchored. In addition, we have uncovered within the transitional ring a subpopulation of markedly electron dense cardiac myocytes. At discrete intervals the transitional cardiac myocytes form contact bridges across the junctional space that are stabilized through localized desmosomes and fascia adherentes junctions with adjacent compact cardiac myocytes. Finally using serial block-face scanning electron microscopy, segmentation and volume reconstruction, we confirm the three-dimensional nature of the junctional region as well as the presence of the sheet-like fibroblast network. These ultrastructural studies demonstrate the previously unrecognized complexity with which the compact and spongy layers are structurally integrated, and provide a new basis for understanding development and regeneration in the zebrafish heart. © 2013 Lafontant et al.

The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

International Nuclear Information System (INIS)

Salmela, Olli

2005-01-01

In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered

The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

Energy Technology Data Exchange (ETDEWEB)

Salmela, Olli [Nokia Networks, P.O. Box 301, 00045 Nokia Group (Finland)]. E-mail: olli.salmela@nokia.com

2005-08-01

In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered.

Discrete-state phasor neural networks

Science.gov (United States)

Noest, André J.

1988-08-01

An associative memory network with local variables assuming one of q equidistant positions on the unit circle (q-state phasors) is introduced, and its recall behavior is solved exactly for any q when the interactions are sparse and asymmetric. Such models can describe natural or artifical networks of (neuro-)biological, chemical, or electronic limit-cycle oscillators with q-fold instead of circular symmetry, or similar optical computing devices using a phase-encoded data representation.

Trust Building Mechanisms for Electronic Business Networks and Their Relation to eSkills

OpenAIRE

Radoslav Delina; Michal Tkáč

2010-01-01

Globalization, supported by information and communication technologies, changes the rules of competitiveness and increases the significance of information, knowledge and network cooperation. In line with this trend, the need for efficient trust-building tools has emerged. The absence of trust building mechanisms and strategies was identified within several studies. Through trust development, participation on e-business network and usage of network services will increase a...

Synthesis of CdS nanowire networks and their optical and electrical properties

International Nuclear Information System (INIS)

Ma, R M; Wei, X L; Dai, L; Huo, H B; Qin, G G

2007-01-01

High quality single-crystal CdS nanowire (NW) networks have been synthesized on Si(111) substrates via the chemical vapour deposition method. X-ray diffraction and selected area electron diffraction show that the NWs in the networks grow along the directions and their (0001) crystal planes are parallel to the Si(111) substrates. Room-temperature photoluminescence (PL) spectra of single CdS NWs in the networks are dominated by a near-band-edge emission and free from deep-level defect emissions. The PLs resulting from free-exciton and bound-exciton recombinations are detected at 77 K. The results of the electrical transport measurement on the CdS NW networks show that the current can flow through different NWs via the cross-junctions. The resistivity, electron concentration and electron mobility of single NWs in the networks are estimated by fitting the I-V curves measured on single NWs with the metal-semiconductor-metal model suggested by Zhang et al (2006 Appl. Phys. Lett. 88 073102; 2007 Adv. Funct. Mater. at press)

Amigo - Ambient Intelligence for the networked home environment

OpenAIRE

Janse, M.D.

2008-01-01

The Amigo project develops open, standardized, interoperable middleware and attractive user services for the networked home environment. Fifteen of Europe's leading companies and research organizations in mobile and home networking, software development, consumer electronics and domestic appliances have joined together in the Amigo project to develop an integrated interoperable home networking framework. Amigo is an IST-funded IP project. This report is the final report providing an overview ...

The Electronic Game Gambit.

Science.gov (United States)

Bing, Jon

1982-01-01

The rapid evolution of today's video games now fills arcades, snack bars, and homes with an array of highly interactive, graphically vivid technical devices. This electronic environment is creating a worldwide communication network. Developments in this area will be beneficial provided that appropriate media policies can be framed. (Author/JN)

Bechtel Hanford, Inc. network security plan for the environmental restoration contract

International Nuclear Information System (INIS)

McCaffrey, M.B.

1997-01-01

As part of the Computer Protection Program, this Network Security Plan identifies the specific security measures used to protect the Bechtel Hanford, Inc. (BHI) enterprise network. The network consists of the communication infrastructure and information systems used by BHI to perform work related to the Environmental Restoration Contract (ERC) at the Hanford Site. It provides electronic communication between the ERC-leased facilities in Richland, Washington and other facilities located on the Hanford Site. Network gateways to other site and offsite networks provide electronic communication with the rest of the Hanford community. The enterprise network is comprised of several individual networks that operate under different conditions and perform different functions. The principal network used by BHI is the Bechtel Local Area Network (BLAN). This document identifies specific security issues surrounding the BLAN and the measures BHI takes to protect it. The other BHI-operated networks are discussed from the perspective of the security impact they have on the BLAN. This plan addresses security for individual and shared computer systems connected to the BHI networks as well as the gateways between other site and external networks. It specifically does not address computer-based information systems that store or process particularly sensitive data, computer systems connected to other site networks (e.g., Hanford Local Area Network), or standalone computers located in ERC facilities

Electron Heat Flux in Pressure Balance Structures at Ulysses

Science.gov (United States)

Yamauchi, Yohei; Suess, Steven T.; Sakurai, Takashi; Whitaker, Ann F. (Technical Monitor)

2001-01-01

Pressure balance structures (PBSs) are a common feature in the high-latitude solar wind near solar minimum. Rom previous studies, PBSs are believed to be remnants of coronal plumes and be related to network activity such as magnetic reconnection in the photosphere. We investigated the magnetic structures of the PBSs, applying a minimum variance analysis to Ulysses/Magnetometer data. At 2001 AGU Spring meeting, we reported that PBSs have structures like current sheets or plasmoids, and suggested that they are associated with network activity at the base of polar plumes. In this paper, we have analyzed high-energy electron data at Ulysses/SWOOPS to see whether bi-directional electron flow exists and confirm the conclusions more precisely. As a result, although most events show a typical flux directed away from the Sun, we have obtained evidence that some PBSs show bi-directional electron flux and others show an isotropic distribution of electron pitch angles. The evidence shows that plasmoids are flowing away from the Sun, changing their flow direction dynamically in a way not caused by Alfven waves. From this, we have concluded that PBSs are generated due to network activity at the base of polar plumes and their magnetic structures axe current sheets or plasmoids.

Electronic health records

DEFF Research Database (Denmark)

Kierkegaard, Patrick

2011-01-01

that a centralised European health record system will become a reality even before 2020. However, the concept of a centralised supranational central server raises concern about storing electronic medical records in a central location. The privacy threat posed by a supranational network is a key concern. Cross......-border and Interoperable electronic health record systems make confidential data more easily and rapidly accessible to a wider audience and increase the risk that personal data concerning health could be accidentally exposed or easily distributed to unauthorised parties by enabling greater access to a compilation...... of the personal data concerning health, from different sources, and throughout a lifetime....

Business Relations in Electronic Commerce

DEFF Research Database (Denmark)

Hjarup, Søren; Henten, Anders

The analysis addresses the issues of how businesses interact in the light of continuous maturation of business-to-business e-commerce. Development of cheaper and more standardised information and communication technologies enhances the depth and width of electronic networks, which may lead...

Optical-Correlator Neural Network Based On Neocognitron

Science.gov (United States)

Chao, Tien-Hsin; Stoner, William W.

1994-01-01

Multichannel optical correlator implements shift-invariant, high-discrimination pattern-recognizing neural network based on paradigm of neocognitron. Selected as basic building block of this neural network because invariance under shifts is inherent advantage of Fourier optics included in optical correlators in general. Neocognitron is conceptual electronic neural-network model for recognition of visual patterns. Multilayer processing achieved by iteratively feeding back output of feature correlator to input spatial light modulator and updating Fourier filters. Neural network trained by use of characteristic features extracted from target images. Multichannel implementation enables parallel processing of large number of selected features.

HDTV versus electronic cinema

Science.gov (United States)

Tinker, Michael

1998-12-01

We are on the brink of transforming the movie theatre with electronic cinema. Technologies are converging to make true electronic cinema, with a 'film look,' possible for the first time. In order to realize the possibilities, we must leverage current technologies in video compression, electronic projection, digital storage, and digital networks. All these technologies have only recently improved sufficiently to make their use in the electronic cinema worthwhile. Video compression, such as MPEG-2, is designed to overcome the limitations of video, primarily limited bandwidth. As a result, although HDTV offers a serious challenge to film-based cinema, it falls short in a number of areas, such as color depth. Freed from the constraints of video transmission, and using the recently improved technologies available, electronic cinema can move beyond video; Although movies will have to be compressed for some time, what is needed is a concept of 'cinema compression,' rather than video compression. Electronic cinema will open up vast new possibilities for viewing experiences at the theater, while at the same time offering up the potential for new economies in the movie industry.

Simulation studies of a wide area health care network.

Science.gov (United States)

McDaniel, J. G.

1994-01-01

There is an increasing number of efforts to install wide area health care networks. Some of these networks are being built to support several applications over a wide user base consisting primarily of medical practices, hospitals, pharmacies, medical laboratories, payors, and suppliers. Although on-line, multi-media telecommunication is desirable for some purposes such as cardiac monitoring, store-and-forward messaging is adequate for many common, high-volume applications. Laboratory test results and payment claims, for example, can be distributed using electronic messaging networks. Several network prototypes have been constructed to determine the technical problems and to assess the effectiveness of electronic messaging in wide area health care networks. Our project, Health Link, developed prototype software that was able to use the public switched telephone network to exchange messages automatically, reliably and securely. The network could be configured to accommodate the many different traffic patterns and cost constraints of its users. Discrete event simulations were performed on several network models. Canonical star and mesh networks, that were composed of nodes operating at steady state under equal loads, were modeled. Both topologies were found to support the throughput of a generic wide area health care network. The mean message delivery time of the mesh network was found to be less than that of the star network. Further simulations were conducted for a realistic large-scale health care network consisting of 1,553 doctors, 26 hospitals, four medical labs, one provincial lab and one insurer. Two network topologies were investigated: one using predominantly peer-to-peer communication, the other using client-server communication.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:7949966

Electron beam induced electronic transport in alkyl amine-intercalated VOx nanotubes

International Nuclear Information System (INIS)

O'Dwyer, C.; Lavayen, V.; Clavijo-Cedeno, C.; Torres, C.M.S.

2008-01-01

The electron beam induced electronic transport in primary alkyl amine-intercalated V 2 O 5 nanotubes is investigated where the organic amine molecules are employed as molecular conductive wires to an aminosilanized substrate surface and contacted to Au interdigitated electrode contacts. The results demonstrate that the high conductivity of the nanotubes is related to the non-resonant tunnelling through the amine molecules and a reduced polaron hopping conduction through the vanadium oxide itself. Both nanotube networks and individual nanotubes exhibit similarly high conductivities where the minority carrier transport is bias dependent and nanotube diameter invariant. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

'The Tsukuba Network' as a new medium for promoting research communications in Tsukuba

Science.gov (United States)

Taguchi, Masamichi

The Science and Technology Agency constructed a PC-based communication network system named 'The Tsukuba Network' as a new medium for promoting the research communication in, and with, the Tsukuba City. For about a year prior to full operation, a pilot system was operated with the cooperation of some monitoring users to gain skill and experience for managing the PC-based communication network. The main service functions of the system are : bulletin board service; electronic mail ; construction of, and access to, the databases involving research information in Tsukuba City ; electronic conference; common use of softwares ; connection to other communication networks ( e.g., university and local network). The host computer is a work station EWS4800 and the network processor is a personal computer PC-9801 . These two computers are connected with LAN.

The Role of Computer Networks in Aerospace Engineering.

Science.gov (United States)

Bishop, Ann Peterson

1994-01-01

Presents selected results from an empirical investigation into the use of computer networks in aerospace engineering based on data from a national mail survey. The need for user-based studies of electronic networking is discussed, and a copy of the questionnaire used in the survey is appended. (Contains 46 references.) (LRW)

Extracellular Electron Transport Coupling Biogeochemical Processes Centimeters

DEFF Research Database (Denmark)

Risgaard-Petersen, Nils; Fossing, Henrik; Christensen, Peter Bondo

2010-01-01

of the oxygen uptake in laboratory incubations of initially homogenized and stabilized sediment. Using microsensors and process rate measurements we further investigated the effect of the electric currents on sediment biogeochemistry. Dissolved sulfide readily donated electrons to the networks and could...... confirmed the depth range of the electric communication and indicated donation of electrons directly from organotrophic bacteria. The separation of oxidation and reduction processes created steep pH gradients eventually causing carbonate precipitation at the surface. The results indicate that electron...... exchanging organisms have major biogeochemical importance as they allow widely separated electron donors and acceptors to react with one another....

Designing for Networked Communications

DEFF Research Database (Denmark)

Designing for Networked Communications: Strategies and Development explains how to plan, use, and understand the products and the dynamic social processes and tasks some of the most vital innovations in the knowledge society depend upon– social as well as technological. Focusing on various forms...... of design, implementation and integration of computer mediated communication, this book bridges the academic fields of computer science and communication studies. Designing for Networked Communications: Strategies and Development uses an interdisciplinary approach, and presents results from recent...... and important research in a variety of forms for networked communications. A constructive and critical view of the interplay between the new electronic and the more conventional modes of communication are utilized, while studies of organizational work practices demonstrate that the use of new technologies...

Memristor-based neural networks

International Nuclear Information System (INIS)

Thomas, Andy

2013-01-01

The synapse is a crucial element in biological neural networks, but a simple electronic equivalent has been absent. This complicates the development of hardware that imitates biological architectures in the nervous system. Now, the recent progress in the experimental realization of memristive devices has renewed interest in artificial neural networks. The resistance of a memristive system depends on its past states and exactly this functionality can be used to mimic the synaptic connections in a (human) brain. After a short introduction to memristors, we present and explain the relevant mechanisms in a biological neural network, such as long-term potentiation and spike time-dependent plasticity, and determine the minimal requirements for an artificial neural network. We review the implementations of these processes using basic electric circuits and more complex mechanisms that either imitate biological systems or could act as a model system for them. (topical review)

Setting MEPS for electronic products

International Nuclear Information System (INIS)

Siderius, Hans-Paul

2014-01-01

When analysing price, performance and efficiency data for 15 consumer electronic and information and communication technology products, we found that in general price did not relate to the efficiency of the product. Prices of electronic products with comparable performance decreased over time. For products where the data allowed fitting the relationship, we found an exponential decrease in price with an average time constant of −0.30 [1/year], meaning that every year the product became 26% cheaper on average. The results imply that the classical approach of setting minimum efficiency performance standards (MEPS) by means of life cycle cost calculations cannot be applied to electronic products. Therefore, an alternative approach based on the improvement of efficiency over time and the variation in efficiency of products on the market, is presented. The concept of a policy action window can provide guidance for the decision on whether setting MEPS for a certain product is appropriate. If the (formal) procedure for setting MEPS takes longer than the policy action window, this means that the efficiency improvement will also be achieved without setting MEPS. We found short, i.e. less than three years, policy action windows for graphic cards, network attached storage products, network switches and televisions. - Highlights: • For electronic consumer products price does not relate to efficiency. • Average price decrease of selected electronic products is 26 % per year. • We give an alternative approach to life cycle cost calculations for setting MEPS. • The policy action window indicates whether setting MEPS is appropriate

Energy challenges in optical access and aggregation networks.

Science.gov (United States)

Kilper, Daniel C; Rastegarfar, Houman

2016-03-06

Scalability is a critical issue for access and aggregation networks as they must support the growth in both the size of data capacity demands and the multiplicity of access points. The number of connected devices, the Internet of Things, is growing to the tens of billions. Prevailing communication paradigms are reaching physical limitations that make continued growth problematic. Challenges are emerging in electronic and optical systems and energy increasingly plays a central role. With the spectral efficiency of optical systems approaching the Shannon limit, increasing parallelism is required to support higher capacities. For electronic systems, as the density and speed increases, the total system energy, thermal density and energy per bit are moving into regimes that become impractical to support-for example requiring single-chip processor powers above the 100 W limit common today. We examine communication network scaling and energy use from the Internet core down to the computer processor core and consider implications for optical networks. Optical switching in data centres is identified as a potential model from which scalable access and aggregation networks for the future Internet, with the application of integrated photonic devices and intelligent hybrid networking, will emerge. © 2016 The Author(s).

Communication Network Architectures Based on Ethernet Passive Optical Network for Offshore Wind Power Farms

Directory of Open Access Journals (Sweden)

Mohamed A. Ahmed

2016-03-01

Full Text Available Nowadays, with large-scale offshore wind power farms (WPFs becoming a reality, more efforts are needed to maintain a reliable communication network for WPF monitoring. Deployment topologies, redundancy, and network availability are the main items to enhance the communication reliability between wind turbines (WTs and control centers. Traditional communication networks for monitoring and control (i.e., supervisory control and data acquisition (SCADA systems using switched gigabit Ethernet will not be sufficient for the huge amount of data passing through the network. In this paper, the optical power budget, optical path loss, reliability, and network cost of the proposed Ethernet Passive Optical Network (EPON-based communication network for small-size offshore WPFs have been evaluated for five different network architectures. The proposed network model consists of an optical network unit device (ONU deployed on the WT side for collecting data from different internal networks. All ONUs from different WTs are connected to a central optical line terminal (OLT, placed in the control center. There are no active electronic elements used between the ONUs and the OLT, which reduces the costs and complexity of maintenance and deployment. As fiber access networks without any protection are characterized by poor reliability, three different protection schemes have been configured, explained, and discussed. Considering the cost of network components, the total implementation expense of different architectures with, or without, protection have been calculated and compared. The proposed network model can significantly contribute to the communication network architecture for next generation WPFs.

Templated synthesis, characterization, and sensing application of macroscopic platinum nanowire network electrodes

DEFF Research Database (Denmark)

Wang, D. H.; Kou, R.; Gil, M. P.

2005-01-01

properties of the electrodes, such as electrochemical active area and methanol oxidation, have also been studied. Compared with conventional polycrystalline Pt electrodes, these novel nanowire network electrodes possess high electrochemical active areas and demonstrate higher current densities and a lower...... onset potential for methanol electro-oxidation. Enzymatic Pt nanowire-network-based sensors show higher sensitivity for glucose detection than that using conventional polycrystalline Pt electrode. Such macroscopic nanowire network electrodes provide ideal platforms for sensing and other device......Abstract: Novel platinum nanowire network electrodes have been fabricated through electrodeposition using mesoporous silica thin films as templates. These electrodes were characterized by X-ray diffraction, transmission electron microscope, and scanning electron microscope. The electrochemical...

Implementasi Sinkronisasi Waktu dengan Network Time Protocol untuk Pemantauan Keamanan Aktivitas Jaringan Telekomunikasi

Directory of Open Access Journals (Sweden)

Ahmad Budi Setiawan

2017-03-01

Full Text Available Abstrak           Penyelenggara Jaringan adalah menyediakan dan atau memberikan pelayanan jaringan yang memungkinkan terselenggaranya transaksi elektronik. Setiap penyelenggara jaringan diwajibkan untuk menyelaraskan waktu dalam transaksi elektronik. Tujuan dilakukannya penyelarasan waktu adalah untuk menyediakan waktu yang standar dan menyediakan acuan waktu untuk segala bentuk transaksi elektronik dengan prinsip keakuratan dan ketertelusuran. Sistem Penyelarasan Waktu Indonesia menggunakan prinsip ketertelusuran dan prinsip keakuratan. Protokol yang digunakan dalam penyelarasan waktu server di Indonesia berbasis Network Time Protocol. Kajian ini membahas mengenai implementasi sinkronisasi waktu dengan network time protocol sebagai salah satu bentuk pemantauan keamanan jaringan telekomunikasi. Metode yang digunakan dalam kajian ini adalah naratif deskriptif mengenai implementasi sinkronisasi waktu.Hasil kajian ini adalah masukan untuk kebijakan dalam keamanan transaksi elektronik melalui sinkronisasi waktu.    Abstract Network providers are providing services or networks that enable the implementation of electronic transactions. Each network operator is required to align the time in electronic transactions. The purpose is to provide time alignment of the time standard and provide a time frame for all forms of electronic transactions with the principles of accuracy and traceability. Indonesian Time Alignment System uses the principle of traceability and accuracy principles. The protocols used in the alignment of the time server in Indonesia-based Network Time Protocol. This study discusses the implementation of time synchronization with a network time protocol as a form of telecommunications network security monitoring. The method used in this study is a descriptive narrative on the implementation of time synchronization. Results of this study are input to the policy in the security of electronic transactions through time

Neural Networks for Modeling and Control of Particle Accelerators

CERN Document Server

Edelen, A.L.; Chase, B.E.; Edstrom, D.; Milton, S.V.; Stabile, P.

2016-01-01

We describe some of the challenges of particle accelerator control, highlight recent advances in neural network techniques, discuss some promising avenues for incorporating neural networks into particle accelerator control systems, and describe a neural network-based control system that is being developed for resonance control of an RF electron gun at the Fermilab Accelerator Science and Technology (FAST) facility, including initial experimental results from a benchmark controller.

Laser Processed Silver Nanowire Network Transparent Electrodes for Novel Electronic Devices

Science.gov (United States)

Spechler, Joshua Allen

Silver nanowire network transparent conducting layers are poised to make headway into a space previously dominated by transparent conducting oxides due to the promise of a flexible, scaleable, lab-atmosphere processable alternative. However, there are many challenges standing in the way between research scale use and consumer technology scale adaptation of this technology. In this thesis we will explore many, and overcome a few of these challenges. We will address the poor conductivity at the narrow nanowire-nanowire junction points in the network by developing a laser based process to weld nanowires together on a microscopic scale. We address the need for a comparative metric for transparent conductors in general, by taking a device level rather than a component level view of these layers. We also address the mechanical, physical, and thermal limitations to the silver nanowire networks by making composites from materials including a colorless polyimide and titania sol-gel. Additionally, we verify our findings by integrating these processes into devices. Studying a hybrid organic/inorganic heterojunction photovoltaic device we show the benefits of a laser processed electrode. Green phosphorescent organic light emitting diodes fabricated on a solution phase processed silver nanowire based electrode show favorable device metrics compared to a conductive oxide electrode based control. The work in this thesis is intended to push the adoption of silver nanowire networks to further allow new device architectures, and thereby new device applications.

Maintaining the power balance in an "empty network"

NARCIS (Netherlands)

Reza, M.; Dominguez, A.O.; Schavemaker, P.H.; Kling, W.L.

2006-01-01

This paper presents the concept of an empty network and shows how the power balance can be maintained in such a system. In this study, an empty network is defined as a power system in which no rotating mass is present; all generators are grid-connected via power electronic interfaces. One generator

Molecular Gels Materials with Self-Assembled Fibrillar Networks

CERN Document Server

Weiss, Richard G

2006-01-01

Molecular gels and fibrillar networks – a comprehensive guide to experiment and theory Molecular Gels: Materials with Self-Assembled Fibrillar Networks provides a comprehensive treatise on gelators, especially low molecular-mass gelators (LMOGs), and the properties of their gels. The structures and modes of formation of the self-assembled fibrillar networks (SAFINs) that immobilize the liquid components of the gels are discussed experimentally and theoretically. The spectroscopic, rheological, and structural features of the different classes of LMOGs are also presented. Many examples of the application of the principal analytical techniques for investigation of molecular gels (including SANS, SAXS, WAXS, UV-vis absorption, fluorescence and CD spectroscopies, scanning electron, transmission electron and optical microscopies, and molecular modeling) are presented didactically and in-depth, as are several of the theories of the stages of aggregation of individual LMOG molecules leading to SAFINs. Several actua...

Complex-valued neural networks advances and applications

CERN Document Server

Hirose, Akira

2013-01-01

Presents the latest advances in complex-valued neural networks by demonstrating the theory in a wide range of applications Complex-valued neural networks is a rapidly developing neural network framework that utilizes complex arithmetic, exhibiting specific characteristics in its learning, self-organizing, and processing dynamics. They are highly suitable for processing complex amplitude, composed of amplitude and phase, which is one of the core concepts in physical systems to deal with electromagnetic, light, sonic/ultrasonic waves as well as quantum waves, namely, electron and

FELIX: a High-Throughput Network Approach for Interfacing to Front End Electronics for ATLAS Upgrades

International Nuclear Information System (INIS)

Anderson, J; Drake, G; Ryu, S; Zhang, J; Borga, A; Boterenbrood, H; Schreuder, F; Vermeulen, J; Chen, H; Chen, K; Lanni, F; Francis, D; Gorini, B; Miotto, G Lehmann; Schumacher, J; Vandelli, W; Levinson, L; Narevicius, J; Roich, A; Plessl, C

2015-01-01

The ATLAS experiment at CERN is planning full deployment of a new unified optical link technology for connecting detector front end electronics on the timescale of the LHC Run 4 (2025). It is estimated that roughly 8000 GBT (GigaBit Transceiver) links, with transfer rates up to 10.24 Gbps, will replace existing links used for readout, detector control and distribution of timing and trigger information. A new class of devices will be needed to interface many GBT links to the rest of the trigger, data-acquisition and detector control systems. In this paper FELIX (Front End LInk eXchange) is presented, a PC-based device to route data from and to multiple GBT links via a high-performance general purpose network capable of a total throughput up to O(20 Tbps). FELIX implies architectural changes to the ATLAS data acquisition system, such as the use of industry standard COTS components early in the DAQ chain. Additionally the design and implementation of a FELIX demonstration platform is presented and hardware and software aspects will be discussed. (paper)

High-performance, scalable optical network-on-chip architectures

Science.gov (United States)

Tan, Xianfang

The rapid advance of technology enables a large number of processing cores to be integrated into a single chip which is called a Chip Multiprocessor (CMP) or a Multiprocessor System-on-Chip (MPSoC) design. The on-chip interconnection network, which is the communication infrastructure for these processing cores, plays a central role in a many-core system. With the continuously increasing complexity of many-core systems, traditional metallic wired electronic networks-on-chip (NoC) became a bottleneck because of the unbearable latency in data transmission and extremely high energy consumption on chip. Optical networks-on-chip (ONoC) has been proposed as a promising alternative paradigm for electronic NoC with the benefits of optical signaling communication such as extremely high bandwidth, negligible latency, and low power consumption. This dissertation focus on the design of high-performance and scalable ONoC architectures and the contributions are highlighted as follow: 1. A micro-ring resonator (MRR)-based Generic Wavelength-routed Optical Router (GWOR) is proposed. A method for developing any sized GWOR is introduced. GWOR is a scalable non-blocking ONoC architecture with simple structure, low cost and high power efficiency compared to existing ONoC designs. 2. To expand the bandwidth and improve the fault tolerance of the GWOR, a redundant GWOR architecture is designed by cascading different type of GWORs into one network. 3. The redundant GWOR built with MRR-based comb switches is proposed. Comb switches can expand the bandwidth while keep the topology of GWOR unchanged by replacing the general MRRs with comb switches. 4. A butterfly fat tree (BFT)-based hybrid optoelectronic NoC (HONoC) architecture is developed in which GWORs are used for global communication and electronic routers are used for local communication. The proposed HONoC uses less numbers of electronic routers and links than its counterpart of electronic BFT-based NoC. It takes the advantages of

Design and research on the platform of network manufacture product electronic trading

Science.gov (United States)

Zhou, Zude; Liu, Quan; Jiang, Xuemei

2003-09-01

With the rapid globalization of market and business, E-trading affects every manufacture enterprise. However, the security of network manufacturing products of transmission on Internet is very important. In this paper we discussed the protocol of fair exchange and platform for network manufacture products E-trading based on fair exchange protocol and digital watermarking techniques. The platform realized reliable and copyright protection.

The Evolution of Electronic Publishing.

Science.gov (United States)

Lancaster, F. W.

1995-01-01

Discusses the evolution of electronic publishing from the early 1960s when computers were used merely to produce conventional printed products to the present move toward networked scholarly publishing. Highlights include library development, periodicals on the Internet, online journals versus paper journals, problems, and the future of…

Virtual Teaching Assistant: Understanding Internet Technologies and the Classroom.

Science.gov (United States)

Reveron, Derek S.

This paper reports the results of using the World Wide Web and a newsgroup for two undergraduate political science courses over an eight-month period. The paper describes an educator's personal experiences with technology as an instructor of political science at the University of Illinois at Chicago (UIC). The paper examines two distinct…

Obtaining Networked Scintillation and Total Electron Content Data Across Africa and Asia: Partnering with the IHY/UNBSSI Developing Nations Program

Science.gov (United States)

Groves, K. M.; Basu, S.; Erickson, T.; Sunanda, B.; David, B.

2005-12-01

Under the Scintillation Network Decision Aid (SCINDA) project, scientists at the Air Force Research Laboratory (AFRL) have developed a sensor network for the purpose of monitoring low-latitude ionospheric total electron content (TEC) and scintillations associated with equatorial Spread F. In addition to monitoring GPS scintillations, TEC and VHF scintillations, the sensor package measures ionospheric drifts when irregularities are present providing important data on vertical electric fields in the F-region .The network currently consists of twelve stations distributed around the globe and the data have been used to conduct numerous studies on the characteristics and climatology of equatorial scintillation, including the impacts of magnetic storms on the equatorial ionosphere. Notably absent from the existing network are observing sites in Africa where both satellite observations and limited historical data sets suggest significant scintillation activity, though the detailed behavior and longitudinal variations across the continent are largely unknown. The latter aspect, in particular, is of great interest because of substantial changes in the orientation of the geomagnetic field in extreme West Africa that transition to a more uniform field geometry spanning the rest of the continent. Understanding the effects of these changes on scintillation climatology will provide new insights into the processes that trigger equatorial Spread F and assist researchers in developing improved forecasts of such activity. AFRL aims to establish 5-8 monitoring sites across equatorial Africa in collaboration with host nations participating in the United Nations Basic Space Science Initiative during the IHY period. In addition to expanding scientific opportunities, it is hoped that these sites will lead to greater awareness of the significant space weather issues impacting Africa and result in enhanced international collaboration between both African and non-African scientists

ELEC-2002: Electronics in HEP

CERN Multimedia

Technical Training; Tel. 74924

2001-01-01

ELEC-2002 is a 15-session modern electronic course, given by CERN physicists and engineers, in a new format within the framework of the Technical Training Programme. This course is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2002 will composed of two terms: sessions will take place on Tuesdays and Thursdays, from 14h00 to 16h30, in the Training Centre Auditorium, bldg. 593.   Winter term: Readout and system electronics for physics (January-February 2002) Introduction: the basics of electronics. Review of electrical circuits: Laplace transforms, transfer functions, RC-CR networks. Transistors, operational amplifiers and applications, transmission lines. (Philippe Farthouat, 15 January) Analogue signal processing. Preamplifiers and shapers; noise in ele...

Designing Networks that are Capable of Self-Healing and Adapting

Science.gov (United States)

2017-04-01

from statistical mechanics, combinatorics, boolean networks, and numerical simulations, and inspired by design principles from biological networks, we... principles for self-healing networks, and applications, and construct an all-possible-paths model for network adaptation. 2015-11-16 UNIT CONVERSION...kg m –3 ) pound-force (lbf avoirdupois) 4.448 222 newton (N) Energy/Work/Power electron volt (eV) 1.602 177 × 10 –19 joule (J) erg 1 × 10 –7

Electron identification capabilities of CBM

Energy Technology Data Exchange (ETDEWEB)

Lebedev, Semen [GSI, Darmstadt (Germany)]|[JINR, Dubna (Russian Federation)

2008-07-01

The Compressed Baryonic Matter (CBM) experiment at the future FAIR facility at Darmstadt will measure dileptons emitted from the hot and dense phase in heavy-ion collisions. In case of an electron measurement, a high purity of identified electrons is required in order to suppress the background. Electron identification in CBM will be performed by a RICH and TRD detectors. In this contribution we will present routines which have been developed for electron identification in CBM. A RICH ring recognition algorithm based on the Hough Transform has been implemented. An ellipse fitting algorithm has been elaborated because most of the CBM RICH rings have elliptic shapes, moreover, it helps to improve ring-track matching and electron identification procedures. An Artificial Neural Network can be used in order to suppress fake rings. The electron identification in RICH is substantially improved by the use of TRD information for which 3 different algorithms are implemented. Results of primary electron identification are presented. All developed algorithms were tested on large statistics of simulated events and are included into the CBM software framework for common use.

ICTEI-2015: International Conference on Telecommunications, Electronics and Informatics. Proceedings

International Nuclear Information System (INIS)

Kantser, V.; Andronic, S.

2015-01-01

This book includes articles which cover a vast range of subjects, such as: telecommunications networks and technologies; electronic, optoelectronic, photonic and information systems and devices; materials, components and equipment in electronics and communications; informatics and computer science; software development and testing etc.

Analog design of a new neural network for optical character recognition.

Science.gov (United States)

Morns, I P; Dlay, S S

1999-01-01

An electronic circuit is presented for a new type of neural network, which gives a recognition rate of over 100 kHz. The network is used to classify handwritten numerals, presented as Fourier and wavelet descriptors, and has been shown to train far quicker than the popular backpropagation network while maintaining classification accuracy.

Reduction Method for Active Distribution Networks

DEFF Research Database (Denmark)

Raboni, Pietro; Chen, Zhe

2013-01-01

On-line security assessment is traditionally performed by Transmission System Operators at the transmission level, ignoring the effective response of distributed generators and small loads. On the other hand the required computation time and amount of real time data for including Distribution...... Networks also would be too large. In this paper an adaptive aggregation method for subsystems with power electronic interfaced generators and voltage dependant loads is proposed. With this tool may be relatively easier including distribution networks into security assessment. The method is validated...... by comparing the results obtained in PSCAD® with the detailed network model and with the reduced one. Moreover the control schemes of a wind turbine and a photovoltaic plant included in the detailed network model are described....

Antidepressant medication use for primary care patients with and without medical comorbidities: a national electronic health record (EHR) network study.

Science.gov (United States)

Gill, James M; Klinkman, Michael S; Chen, Ying Xia

2010-01-01

Because comorbid depression can complicate medical conditions (eg, diabetes), physicians may treat depression more aggressively in patients who have these conditions. This study examined whether primary care physicians prescribe antidepressant medications more often and in higher doses for persons with medical comorbidities. This secondary data analysis of electronic health record data was conducted in the Centricity Health Care User Research Network (CHURN), a national network of ambulatory practices that use a common outpatient electronic health record. Participants included 209 family medicine and general internal medicine providers in 40 primary care CHURN offices in 17 US states. Patients included adults with a new episode of depression that had been diagnosed during the period October 2006 through July 2007 (n = 1513). Prescription of antidepressant medication and doses of antidepressant medication were compared for patients with and without 6 comorbid conditions: diabetes, coronary heart disease, congestive heart failure, cerebrovascular disease, chronic obstructive pulmonary disease, and cancer. 20.7% of patients had at least one medical comorbidity whereas 5.8% had multiple comorbidities. Overall, 77% of depressed patients were prescribed antidepressant medication. After controlling for age and sex, patients with multiple comorbidities were less likely to be prescribed medication (adjusted odds ratio, 0.58; 95% CI, 0.35-0.96), but there was no significant difference by individual comorbidities. Patients with cerebrovascular disease were less likely to be prescribed a full dose of medication (adjusted odds ratio, 0.26; 95% CI, 0.08-0.88), but there were no differences for other comorbidities or for multiple comorbidities, and there was no difference for any comorbidities in the prescription of minimally effective doses. Patients with new episodes of depression who present to a primary care practice are not treated more aggressively if they have medical

Mitigation of Voltage Sags in CIGRE Low Voltage Distribution Network

DEFF Research Database (Denmark)

Mustafa, Ghullam; Bak-Jensen, Birgitte; Mahat, Pukar

2013-01-01

Any problem in voltage in a power network is undesirable as it aggravates the quality of the power. Power electronic devices such as Voltage Source Converter (VSC) based Static Synchronous Compensator (STATCOM), Dynamic Voltage Restorer (DVR) etc. are commonly used for the mitigation of voltage p....... The compensation of voltage sags in the different parts of CIGRE distribution network is done by using the four STATCOM compensators already existing in the test grid. The simulations are carried out in DIgSILENT power factory software version 15.0.......Any problem in voltage in a power network is undesirable as it aggravates the quality of the power. Power electronic devices such as Voltage Source Converter (VSC) based Static Synchronous Compensator (STATCOM), Dynamic Voltage Restorer (DVR) etc. are commonly used for the mitigation of voltage...... problems in the distribution system. The voltage problems dealt with in this paper are to show how to mitigate voltage sags in the CIGRE Low Voltage (LV) test network and networks like this. The voltage sags, for the tested cases in the CIGRE LV test network are mainly due to three phase faults...

Network Coordinator Report

Science.gov (United States)

Himwich, Ed; Strand, Richard

2013-01-01

This report includes an assessment of the network performance in terms of lost observing time for the 2012 calendar year. Overall, the observing time loss was about 12.3%, which is in-line with previous years. A table of relative incidence of problems with various subsystems is presented. The most significant identified causes of loss were electronics rack problems (accounting for about 21.8% of losses), antenna reliability (18.1%), RFI (11.8%), and receiver problems (11.7%). About 14.2% of the losses occurred for unknown reasons. New antennas are under development in the USA, Germany, and Spain. There are plans for new telescopes in Norway and Sweden. Other activities of the Network Coordinator are summarized.

What Motivates Young Adults to Talk About Physical Activity on Social Network Sites?

Science.gov (United States)

Zhang, Ni; Campo, Shelly; Yang, Jingzhen; Eckler, Petya; Snetselaar, Linda; Janz, Kathleen; Leary, Emily

2017-06-22

Electronic word-of-mouth on social network sites has been used successfully in marketing. In social marketing, electronic word-of-mouth about products as health behaviors has the potential to be more effective and reach more young adults than health education through traditional mass media. However, little is known about what motivates people to actively initiate electronic word-of-mouth about health behaviors on their personal pages or profiles on social network sites, thus potentially reaching all their contacts on those sites. This study filled the gap by applying a marketing theoretical model to explore the factors associated with electronic word-of-mouth on social network sites about leisure-time physical activity. A Web survey link was sent to undergraduate students at one of the Midwestern universities and 439 of them completed the survey. The average age of the 439 participants was 19 years (SD=1 year, range: 18-24). Results suggested that emotional engagement with leisure-time physical activity (ie, affective involvement in leisure-time physical activity) predicted providing relevant opinions or information on social network sites. Social network site users who perceived stronger ties with all their contacts were more likely to provide and seek leisure-time physical activity opinions and information. People who provided leisure-time physical activity opinions and information were more likely to seek opinions and information, and people who forwarded information about leisure-time physical activity were more likely to chat about it. This study shed light on the application of the electronic word-of-mouth theoretical framework in promoting health behaviors. The findings can also guide the development of future social marketing interventions using social network sites to promote leisure-time physical activity. ©Ni Zhang, Shelly Campo, Jingzhen Yang, Petya Eckler, Linda Snetselaar, Kathleen Janz, Emily Leary. Originally published in the Journal of Medical

Logical spin-filtering in a triangular network of quantum nanorings with a Rashba spin-orbit interaction

Science.gov (United States)

Dehghan, E.; Sanavi Khoshnoud, D.; Naeimi, A. S.

2018-01-01

The spin-resolved electron transport through a triangular network of quantum nanorings is studied in the presence of Rashba spin-orbit interaction (RSOI) and a magnetic flux using quantum waveguide theory. This study illustrates that, by tuning Rashba constant, magnetic flux and incoming electron energy, the triangular network of quantum rings can act as a perfect logical spin-filtering with high efficiency. By changing in the energy of incoming electron, at a proper value of the Rashba constant and magnetic flux, a reverse in the direction of spin can take place in the triangular network of quantum nanorings. Furthermore, the triangular network of quantum nanorings can be designed as a device and shows several simultaneous spintronic properties such as spin-splitter and spin-inverter. This spin-splitting is dependent on the energy of the incoming electron. Additionally, different polarizations can be achieved in the two outgoing leads from an originally incoming spin state that simulates a Stern-Gerlach apparatus.

Vortex (particle) and antivortex (hole) doping into superconducting network

International Nuclear Information System (INIS)

Ishida, Takekazu; Shimizu, Makoto; Matsushima, Yoshiaki; Hayashi, Masahiko; Ebisawa, Hiromichi; Sato, Osamu; Kato, Masaru; Satoh, Kazuo

2007-01-01

Superconducting finite-sized Pb square networks with 10 x 10 square holes fabricated by electron beam lithography have been investigated in view of particle (vortex) doping into superconducting networks. Vortex image observations were carried out by a SQUID microscope to compare with predictions from the Ginzburg-Landau theory. We found the exactly reversed pattern between the vortex-doping x and the antivortex doping 1 - x into the fully occupied network (x = 1/4)

Visionary network 2030. Technology vision for future distribution network

International Nuclear Information System (INIS)

Kumpulainen, L.; Laaksonen, H.; Komulainen, R.

2006-11-01

Objective of this research was to create the long term vision of a distribution network technology to be used for the near future rebuild and necessary R and D efforts. Present status of the grid was briefly handled and created scenarios for the operational environment changes and available technology International view was used for getting familiar with the present solutions and future expectations in other countries. Centralised power generation is supposed to form the majority, but also the distributed generation will play more and more important role, which is hard to predict due to the uncertainty of the development of the regulation. Higher reliability and safety in major faults are expected from the future network with the reasonable costs. Impact of the climate change and impregnant using restrictions cause difficulties especially for the overhead lines in the forests. In the rural network also the ageing is the problem. For the urban networks the land usage and environmental issues get more challenging and the network reinforcement is necessary due to the increased use of electricity. As a result several technical solutions are available. Additions to the technology today, several new solutions were introduced. Important solutions in the future network are supposed to be the wide range of underground cable, high degree utilisation of the communication and network automation solutions, considerable shorter protection zones and new layout solution. In a long run the islanding enabled by the distributed energy systems and totally new network structures and solutions based on power electronics are supposed to improve the power quality and profitability. Separate quality classes in network design principally are also supposed to be approved. Getting into the vision needs also the Roadmap project, which coordinates and focuses the development of the industry. So the limited national development resources can be effectively utilised. A coordinated national

Analysis of operating model of electronic invoice colombian Colombian electronic billing analysis of the operational model

Directory of Open Access Journals (Sweden)

Sérgio Roberto da Silva

2016-06-01

Full Text Available Colombia has been one of the first countries to introduce electronic billing process on a voluntary basis, from a traditional to a digital version. In this context, the article analyzes the electronic billing process implemented in Colombia and the advantages. Methodological research is applied, qualitative, descriptive and documentary; where the regulatory framework and the conceptualization of the model is identified; the process of adoption of electronic billing is analyzed, and finally the advantages and disadvantages of its implementation is analyzed. The findings indicate that the model applied in Colombia to issue an electronic billing in sending and receiving process, is not complex, but it requires a small adequate infrastructure and trained personnel to reach all sectors, especially the micro and business which is the largest business network in the country.

Action Research as a Network

DEFF Research Database (Denmark)

Boulus-Rødje, Nina

2012-01-01

This paper explores roles and interventions in IS action research. I draw upon a four-year research project about electronic medical records, conducted in close collaboration with a community partner. Following a self-reflexive stance, I trace the trajectory of the research engagement...... and the different roles I occupied. To better understand the complex nature of collaboration found within action research projects, I propose conceptualizing action research as a network. The network framework directs our attention to the collective production and the conditions through which roles...... this influences the researcher’s agency....

Tyrosine B10 triggers a heme propionate hydrogen bonding network loop with glutamine E7 moiety

International Nuclear Information System (INIS)

Ramos-Santana, Brenda J.; López-Garriga, Juan

2012-01-01

Highlights: ► H-bonding network loop by PheB10Tyr mutation is proposed. ► The propionate group H-bonding network restricted the flexibility of the heme. ► The hydrogen bonding interaction modulates the electron density of the iron. ► Propionate H-bonding network loop explains the heme-ligand stabilization. -- Abstract: Propionates, as peripheral groups of the heme active center in hemeproteins have been described to contribute in the modulation of heme reactivity and ligand selection. These electronic characteristics prompted the question of whether the presence of hydrogen bonding networks between propionates and distal amino acids present in the heme ligand moiety can modulate physiological relevant events, like ligand binding association and dissociation activities. Here, the role of these networks was evaluated by NMR spectroscopy using the hemoglobin I PheB10Tyr mutant from Lucina pectinata as model for TyrB10 and GlnE7 hemeproteins. 1 H-NMR results for the rHbICN PheB10Tyr derivative showed chemical shifts of TyrB10 OHη at 31.00 ppm, GlnE7 N ε1 H/N ε2 H at 10.66 ppm/−3.27 ppm, and PheE11 C δ H at 11.75 ppm, indicating the presence of a crowded, collapsed, and constrained distal pocket. Strong dipolar contacts and inter-residues crosspeaks between GlnE7/6-propionate group, GlnE7/TyrB10 and TyrB10/CN suggest that this hydrogen bonding network loop between GlnE7, TyrB10, 6-propionate group, and the heme ligand contribute significantly to the modulation of the heme iron electron density as well as the ligand stabilization mechanism. Therefore, the network loop presented here support the fact that the electron withdrawing character of the hydrogen bonding is controlled by the interaction of the propionates and the nearby electronic environments contributing to the modulation of the heme electron density state. Thus, we hypothesize that in hemeproteins with similar electrostatic environment the flexibility of the heme-6-propionate promotes a hydrogen

Presentation of various types of electronic business available on the Internet, Advantages, Disadvantages, Key Requirements and Security, Implementation Model of an Electronic Business

OpenAIRE

Andreea A.S. Ionescu; Raul Serban

2012-01-01

This paper speaks about the advantages, disadvantages, key requirements necessary of an electronic business, the infrastructure of the Internet, the existing main networks on the Internet, standards used to develop electronic business and the security of an e-business environment. As we know in an organization the information is an asset that has value and should be protected and diversified. We also propose an implementation model of an electronic business that interconnects two concepts: ER...

Networks in Buildings: Which Path Forward?

Energy Technology Data Exchange (ETDEWEB)

Nordman, Bruce

2008-08-17

To date, digital networks have principally been installed for connecting information technology devices, with more modest use in consumer electronics, security, and large building control systems. The next 20 years will see much greater deployment of networks in buildings of all types, and across all end uses. Most of these are likely to be introduced primarily for reasons other than energy efficiency, and add energy use for network interfaces and network products. Widespread networking could easily lead to increased energy use, and experience with IT and CE networks suggests this may be likely. Active engagement by energy efficiency professionals in the architecture and design of future networks could lead to their being a large and highly cost-effective tool for efficiency. However, network standards are complex and take many years to develop and negotiate so that lack of action on this in the near term may foreclose important opportunities for years or decades to come. Digital networks need to be common globally, providing another challenge to building systems and elements that are more commonly designed only for national or regional markets. Key future networks are lighting, climate control, and security/presence. This paper reviews some examples of past network designs and use and the lessons they hold for future building networks. It also highlights key needed areas for research, policy, and standards development.

Good Communication: The Other Social Network for Successful IT Organizations

Science.gov (United States)

Trubitt, Lisa; Overholtzer, Jeff

2009-01-01

Social networks of the electronic variety have become thoroughly embedded in contemporary culture. People have woven these networks into their daily routines, using Facebook, Twitter, LinkedIn, online gaming environments, and other tools to build and maintain complex webs of professional and personal relationships. Chief Information Officers…

Quantum network theory

International Nuclear Information System (INIS)

Yurke, B.; Denker, J.S.

1984-01-01

A general approach, within the framework of canonical quantization, is described for analyzing the quantum behavior of complicated electronic circuits. This approach is capable of dealing with electrical networks having nonlinear or dissipative elements. The techniques are used to analyze a degenerate parametric amplifier, a device capable of generating squeezed coherent state signals. A circuit capable of performing back-action-evading electrical measurements is also discussed. (author)

Applied data communications and networks

CERN Document Server

Buchanan, W

1996-01-01

The usage of data communications and computer networks are ever in­ creasing. It is one of the few technological areas which brings benefits to most of the countries and the peoples of the world. Without it many industries could not exist. It is the objective of this book to discuss data communications in a readable form that students and professionals all over the world can understand. As much as possible the text uses dia­ grams to illustrate key points. Most currently available data communications books take their view­ point from either a computer scientists top-down approach or from an electronic engineers bottom-up approach. This book takes a practical ap­ proach and supports it with a theoretical background to create a textbook which can be used by electronic engineers, computer engineers, computer scientists and industry professionals. It discusses most of the current and future key data communications technologies, including: • Data Communications Standards and Models; • Local Area Networks (...

Network losses with photovoltaic and storage

NARCIS (Netherlands)

Ho, D.T.; Cobben, J.F.G.; Bhattacharyya, S.; Kling, W.L.

2010-01-01

Recent development of dispersed generation technologies employing sustainable energy resources has encouraged the entry of power generation at distribution level. The close distance between load and generation reduces the network losses. However, DG system with electronic devices gives harmonic

"@Work in Cyberspace": Exploring Practitioner Use of the PRForum.

Science.gov (United States)

Thomsen, Steven R.

1996-01-01

Explores the impact of PRForum, an Internet newsgroup, on the public relations community by examining the nature, function, and content of online exchanges. Finds that PRForum is used for three functions: to facilitate the exchange of information; to create a forum for debate on issues; and to cultivate a sense of self-validation on personal and…

XXIII International Conference on Nonlinear Dynamics of Electronic Systems

CERN Document Server

Stoop, Ruedi; Stramaglia, Sebastiano

2017-01-01

This book collects contributions to the XXIII international conference “Nonlinear dynamics of electronic systems”. Topics range from non-linearity in electronic circuits to synchronisation effects in complex networks to biological systems, neural dynamics and the complex organisation of the brain. Resting on a solid mathematical basis, these investigations address highly interdisciplinary problems in physics, engineering, biology and biochemistry.

AN INTERNET RACK MONITOR-CONTROLLER FOR APS LINAC RF ELECTRONICS UPGRADE

Energy Technology Data Exchange (ETDEWEB)

Ma, Hengjie; Smith, Terry; Nassiri, Alireza; Sun, Yine; Doolittle, Lawrence; Ratti, Alex

2016-06-01

To support the research and development in APS LINAC area, the existing LINAC rf control performance needs to be much improved, and thus an upgrade of the legacy LINAC rf electronics becomes necessary. The proposed upgrade plan centers on the concept of using a modern, network-attached, rackmount digital electronics platform –Internet Rack Monitor-Controller (or IRMC) to achieve the goal of modernizing the rf electronics at a lower cost. The system model of the envisioned IRMC is basically a 3-tier stack with a high-performance DSP in the mid-layer to perform the core tasks of real-time rf data processing and controls. The Digital Front-End (DFE) attachment layer at bottom bridges the applicationspecific rf front-ends to the DSP. A network communication gateway, together with an embedded event receiver (EVR) in the top layer merges the Internet Rack MonitorController node into the networks of the accelerator controls infrastructure. Although the concept is very much in trend with today’s Internet-of-Things (IoT), this implementation has actually been used in the accelerators for over two decades.

Bipolar resistive switching behaviors of ITO nanowire networks

Directory of Open Access Journals (Sweden)

Qiang Li

2016-02-01

Full Text Available We have fabricated indium tin oxide (ITO nanowire (NW networks on aluminum electrodes using electron beam evaporation. The Ag/ITO-NW networks/Al capacitor exhibits bipolar resistive switching behavior. The resistive switching characteristics of ITO-NW networks are related to the morphology of NWs. The x-ray photoelectron spectroscopy was used to obtain the chemical nature from the NWs surface, investigating the oxygen vacancy state. A stable switching voltages and a clear memory window were observed in needle-shaped NWs. The ITO-NW networks can be used as a new two-dimensional metal oxide material for the fabrication of high-density memory devices.

An Electronic-Nose Sensor Node Based on a Polymer-Coated Surface Acoustic Wave Array for Wireless Sensor Network Applications

Science.gov (United States)

Tang, Kea-Tiong; Li, Cheng-Han; Chiu, Shih-Wen

2011-01-01

This study developed an electronic-nose sensor node based on a polymer-coated surface acoustic wave (SAW) sensor array. The sensor node comprised an SAW sensor array, a frequency readout circuit, and an Octopus II wireless module. The sensor array was fabricated on a large K2 128° YX LiNbO3 sensing substrate. On the surface of this substrate, an interdigital transducer (IDT) was produced with a Cr/Au film as its metallic structure. A mixed-mode frequency readout application specific integrated circuit (ASIC) was fabricated using a TSMC 0.18 μm process. The ASIC output was connected to a wireless module to transmit sensor data to a base station for data storage and analysis. This sensor node is applicable for wireless sensor network (WSN) applications. PMID:22163865

An electronic-nose sensor node based on a polymer-coated surface acoustic wave array for wireless sensor network applications.

Science.gov (United States)

Tang, Kea-Tiong; Li, Cheng-Han; Chiu, Shih-Wen

2011-01-01

This study developed an electronic-nose sensor node based on a polymer-coated surface acoustic wave (SAW) sensor array. The sensor node comprised an SAW sensor array, a frequency readout circuit, and an Octopus II wireless module. The sensor array was fabricated on a large K(2) 128° YX LiNbO3 sensing substrate. On the surface of this substrate, an interdigital transducer (IDT) was produced with a Cr/Au film as its metallic structure. A mixed-mode frequency readout application specific integrated circuit (ASIC) was fabricated using a TSMC 0.18 μm process. The ASIC output was connected to a wireless module to transmit sensor data to a base station for data storage and analysis. This sensor node is applicable for wireless sensor network (WSN) applications.

An Electronic-Nose Sensor Node Based on a Polymer-Coated Surface Acoustic Wave Array for Wireless Sensor Network Applications

Directory of Open Access Journals (Sweden)

Kea-Tiong Tang

2011-04-01

Full Text Available This study developed an electronic-nose sensor node based on a polymer-coated surface acoustic wave (SAW sensor array. The sensor node comprised an SAW sensor array, a frequency readout circuit, and an Octopus II wireless module. The sensor array was fabricated on a large K2 128° YX LiNbO3 sensing substrate. On the surface of this substrate, an interdigital transducer (IDT was produced with a Cr/Au film as its metallic structure. A mixed-mode frequency readout application specific integrated circuit (ASIC was fabricated using a TSMC 0.18 μm process. The ASIC output was connected to a wireless module to transmit sensor data to a base station for data storage and analysis. This sensor node is applicable for wireless sensor network (WSN applications.

High speed all optical networks

Science.gov (United States)

Chlamtac, Imrich; Ganz, Aura

1990-01-01

An inherent problem of conventional point-to-point wide area network (WAN) architectures is that they cannot translate optical transmission bandwidth into comparable user available throughput due to the limiting electronic processing speed of the switching nodes. The first solution to wavelength division multiplexing (WDM) based WAN networks that overcomes this limitation is presented. The proposed Lightnet architecture takes into account the idiosyncrasies of WDM switching/transmission leading to an efficient and pragmatic solution. The Lightnet architecture trades the ample WDM bandwidth for a reduction in the number of processing stages and a simplification of each switching stage, leading to drastically increased effective network throughputs. The principle of the Lightnet architecture is the construction and use of virtual topology networks, embedded in the original network in the wavelength domain. For this construction Lightnets utilize the new concept of lightpaths which constitute the links of the virtual topology. Lightpaths are all-optical, multihop, paths in the network that allow data to be switched through intermediate nodes using high throughput passive optical switches. The use of the virtual topologies and the associated switching design introduce a number of new ideas, which are discussed in detail.

Local Governance and ICT Research Network for Africa | Page 2 ...

International Development Research Centre (IDRC) Digital Library (Canada)

Local Governance and ICT Research Network for Africa (LOG-IN Africa) is an emergent pan-African network of researchers and research institutions from nine countries. LOG-IN Africa will assess the current state and outcome of electronic local governance initiatives in Africa, focusing on how information and ...

MONITOR Ionospheric Network: two case studies on scintillation and electron content variability

Directory of Open Access Journals (Sweden)

Y. Béniguel

2017-03-01

Full Text Available The ESA MONITOR network is composed of high-frequency-sampling global navigation satellite systems (GNSS receivers deployed mainly at low and high latitudes to study ionosphere variability and jointly with global GNSS data and ionospheric processing software in support of the GNSS and its satellite-based augmentation systems (SBAS like the European EGNOS. In a recent phase of the project, the network was merged with the CNES/ASECNA network and new receivers were added to complement the latter in the western African sector. This paper summarizes MONITOR, presenting two case studies on scintillations (using almost 2 years of data measurements. The first case occurred during the major St. Patrick's Day geomagnetic storm in 2015. The second case study was performed in the last phase of the project, which was supported by ESA EGNOS Project Office, when we paid special attention to extreme events that might degrade the system performance of the European EGNOS.

Stakeholder engagement: a key component of integrating genomic information into electronic health records.

Science.gov (United States)

Hartzler, Andrea; McCarty, Catherine A; Rasmussen, Luke V; Williams, Marc S; Brilliant, Murray; Bowton, Erica A; Clayton, Ellen Wright; Faucett, William A; Ferryman, Kadija; Field, Julie R; Fullerton, Stephanie M; Horowitz, Carol R; Koenig, Barbara A; McCormick, Jennifer B; Ralston, James D; Sanderson, Saskia C; Smith, Maureen E; Trinidad, Susan Brown

2013-10-01

Integrating genomic information into clinical care and the electronic health record can facilitate personalized medicine through genetically guided clinical decision support. Stakeholder involvement is critical to the success of these implementation efforts. Prior work on implementation of clinical information systems provides broad guidance to inform effective engagement strategies. We add to this evidence-based recommendations that are specific to issues at the intersection of genomics and the electronic health record. We describe stakeholder engagement strategies employed by the Electronic Medical Records and Genomics Network, a national consortium of US research institutions funded by the National Human Genome Research Institute to develop, disseminate, and apply approaches that combine genomic and electronic health record data. Through select examples drawn from sites of the Electronic Medical Records and Genomics Network, we illustrate a continuum of engagement strategies to inform genomic integration into commercial and homegrown electronic health records across a range of health-care settings. We frame engagement as activities to consult, involve, and partner with key stakeholder groups throughout specific phases of health information technology implementation. Our aim is to provide insights into engagement strategies to guide genomic integration based on our unique network experiences and lessons learned within the broader context of implementation research in biomedical informatics. On the basis of our collective experience, we describe key stakeholder practices, challenges, and considerations for successful genomic integration to support personalized medicine.

Business-to-business electronic commerce

OpenAIRE

John Wenninger

1999-01-01

To improve efficiency, some large retailers, suppliers, and distributors have begun to conduct business-to-business commerce electronically. This practice could grow rapidly if the Internet becomes the primary low-cost network for such transactions. Before the Internet can fully support business-to-business commerce, however, companies must overcome several technological and security obstacles.

Model Order Reduction for Electronic Circuits:

DEFF Research Database (Denmark)

Hjorth, Poul G.; Shontz, Suzanne

Electronic circuits are ubiquitous; they are used in numerous industries including: the semiconductor, communication, robotics, auto, and music industries (among many others). As products become more and more complicated, their electronic circuits also grow in size and complexity. This increased...... in the semiconductor industry. Circuit simulation proceeds by using Maxwell’s equations to create a mathematical model of the circuit. The boundary element method is then used to discretize the equations, and the variational form of the equations are then solved on the graph network....

Carbon Nanotube Flexible and Stretchable Electronics.

Science.gov (United States)

Cai, Le; Wang, Chuan

2015-12-01

The low-cost and large-area manufacturing of flexible and stretchable electronics using printing processes could radically change people's perspectives on electronics and substantially expand the spectrum of potential applications. Examples range from personalized wearable electronics to large-area smart wallpapers and from interactive bio-inspired robots to implantable health/medical apparatus. Owing to its one-dimensional structure and superior electrical property, carbon nanotube is one of the most promising material platforms for flexible and stretchable electronics. Here in this paper, we review the recent progress in this field. Applications of single-wall carbon nanotube networks as channel semiconductor in flexible thin-film transistors and integrated circuits, as stretchable conductors in various sensors, and as channel material in stretchable transistors will be discussed. Lastly, state-of-the-art advancement on printing process, which is ideal for large-scale fabrication of flexible and stretchable electronics, will also be reviewed in detail.

Electronic prescribing: criteria for evaluating handheld prescribing systems and an evaluation of a new, handheld, wireless wide area network (WWAN) prescribing system.

Science.gov (United States)

Goldblum, O M

2001-02-01

The objectives of this study were: 1) to establish criteria for evaluating handheld computerized prescribing systems; and 2) to evaluate out-of-box performance and features of a new, Palm Operating System (OS)-based, handheld, wireless wide area network (WWAN) prescribing system. The system consisted of a Palm Vx handheld organizer, a Novatel Minstrel V wireless modem, OmniSky wireless internet access and ePhysician ePad 1.1, the Palm OS electronic prescribing software program. A dermatologist familiar with healthcare information technology conducted an evaluation of the performance and features of a new, handheld, WWAN electronic prescribing system in an office practice during a three-month period in 2000. System performance, defined as transmission success rate, was determined from data collected during the three-month trial. Evaluation criteria consisted of an analysis of features found in electronic prescribing systems. All prescriptions written for all patients seen during a three-month period (August - November, 2000) were eligible for inclusion. Prescriptions written for patients who intended to fill them at pharmacies without known facsimile receiving capabilities were excluded from the study. The performance of the system was evaluated using data collected during the study. Criteria for evaluating features of electronic prescribing systems were developed and used to analyze the system employed in this study. During this three-month trial, 200 electronic prescriptions were generated for 132 patients included in the study. Of these prescriptions, 92.5 percent were successfully transmitted to pharmacies. Transmission failures resulted from incorrect facsimile numbers and non-functioning facsimile machines. Criteria established for evaluation of electronic prescribing systems included System (Hardware & Software), Costs, System Features, Printing & Transmission, Formulary & Insurance, Customization, Drug Safety and Security. This study is the first effort to

Electronic health records for dummies

CERN Document Server

Williams, Trenor

2010-01-01

The straight scoop on choosing and implementing an electronic health records (EHR) system Doctors, nurses, and hospital and clinic administrators are interested in learning the best ways to implement and use an electronic health records system so that they can be shared across different health care settings via a network-connected information system. This helpful, plain-English guide provides need-to-know information on how to choose the right system, assure patients of the security of their records, and implement an EHR in such a way that it causes minimal disruption to the daily demands of a

Netiquette in Electronic Communication

Directory of Open Access Journals (Sweden)

Tomáš Kozík

2014-06-01

Full Text Available Electronic mail and electronic communications systems are considered significant and effective tools of communication. One of the most widespread electronic communication tools is e - mail communication. In order to avoid misinterpretation of the report on the side of the recipient, it is need to pay attention to the writing of e - mail messages as well as to their content. With the continuous expansion of the use of electronic communication there have gradually developed certain rules of etiquette in electronic communications. The existing rules of the propriety ones are expressed in the term " etiqutte " and are not automatically applied in the new communications environment - media. For electronic communication, the new rules of etiquette have been stabilised into a term NETIQUETTE. The word netiquette was created by combining words NET (net and ETIKETA (a set of rules of social behavior and habits. Netiquette constitutes the rules of the behavior of users on a network. Although the netiquette is merely "an unwritten set of rules", their not using can be understood as a type of disrespect. Analysis of knowledge of domestic and foreign sources as well as results of a survey confirmed the justification of paying attention to the education of individuals in NETIQUETTE, irrespective of the degree of education.

Wireless Sensor Networks for Long Distance Pipeline Monitoring

OpenAIRE

Augustine C. Azubogu; Victor E. Idigo; Schola U. Nnebe; Obinna S. Oguejiofor; Simon E.

2013-01-01

The main goal of this seminal paper is to introduce the application of Wireless Sensor Networks (WSN) in long distance infrastructure monitoring (in particular in pipeline infrastructure monitoring) – one of the on-going research projects by the Wireless Communication Research Group at the department of Electronic and Computer Engineering, Nnamdi Azikiwe University, Awka. The current sensor network architectures for monitoring long distance pipeline infrastructures are pr...

Scalable Lunar Surface Networks and Adaptive Orbit Access

Science.gov (United States)

Wang, Xudong

2015-01-01

Teranovi Technologies, Inc., has developed innovative network architecture, protocols, and algorithms for both lunar surface and orbit access networks. A key component of the overall architecture is a medium access control (MAC) protocol that includes a novel mechanism of overlaying time division multiple access (TDMA) and carrier sense multiple access with collision avoidance (CSMA/CA), ensuring scalable throughput and quality of service. The new MAC protocol is compatible with legacy Institute of Electrical and Electronics Engineers (IEEE) 802.11 networks. Advanced features include efficiency power management, adaptive channel width adjustment, and error control capability. A hybrid routing protocol combines the advantages of ad hoc on-demand distance vector (AODV) routing and disruption/delay-tolerant network (DTN) routing. Performance is significantly better than AODV or DTN and will be particularly effective for wireless networks with intermittent links, such as lunar and planetary surface networks and orbit access networks.

SVC or VSC for reduction of voltage sags and flicker. Trends in power electronics

Energy Technology Data Exchange (ETDEWEB)

Haeusler, M; Schnettler, A [ABB Calor Emag Schaltanlagen AG, Mannheim (Germany); Halvarsson, P [ABB Power Systems AB, Vaesteraas (Sweden)

1997-07-01

In the past complaints about insufficient power quality were often caused by flicker observed in the neighbourhood of industrial networks. Voltage sags due to faults in the power system pass, however, mostly unnoticed as not-so-common events. Now electronic controls are penetrating more and more in industry. Electronic controllers on factory machines - particularly those for variable speed motors - are vulnerable to voltage sags. A one-tenth second sag can cause a $200.000 downtime incident in a big factory. Therefore the demands on power quality are rising in industry as well. The costly separation in clean networks for residential areas and dirty networks for industrial grids is no perfect solution to avoid such problems. Static VAr Compensators (SVC) are traditionally one means to control the voltage in industrial networks. Because of the recent development of powerful gate turn-off semiconductor devices another type of converter has gained new interest for mitigation of system disturbances, the voltage-source converter (VSC). The characteristics of both types of power electronics in view of their possibilities for this application are presented. (orig.)

CUSTOMER SATISFACTION REGARDING BANK’S DISTRIBUTION CHANNELS – THE ATM NETWORK

Directory of Open Access Journals (Sweden)

Zaharie Monica Maria

2010-07-01

Full Text Available In addition to traditional distribution methods (network of territorial units, to better meet market requirements in terms of speed and efficiency of services, banks have developed interactive electronic and computerized systems for clients: banking services via telephone, internet banking, network of automatic teller machines (ATMs, Electronic Funds Transfer at point of sale (EFTPOS. Automatic Teller Machines have become in recent years one of the common instruments through which banks offer the possibility of conducting routine operations such as: cash withdrawals, bill payments, transfer between accounts. This article presents the results obtained following a research that focused on determining the customers’ degree of satisfaction with the distribution channels used by a Top Five Romanian Bank, in particular the ATMs distribution network.

Determination of Spatio-Temporal Characteristics of D-region Electron Density during Annular Solar Eclipse from VLF Network Observations

Science.gov (United States)

Basak, T.; Hobara, Y.

2015-12-01

A major part of the path of the annular solar eclipse of May 20, 2012 (magnitude 0.9439) was over southern Japan. The D-region ionospheric changes associated with that eclipse, led to several degree of observable perturbations of sub-ionospheric very low frequency (VLF) radio signal. The University of Electro-Communications (UEC) operates VLF observation network over Japan. The solar eclipse associated signal changes were recorded in several receiving stations (Rx) simultaneously for the VLF signals coming from NWC/19.8kHz, JJI/22.2kHz, JJY/40.0kHz, NLK/24.8kHz and other VLF transmitters (Tx). These temporal dependences of VLF signal perturbation have been analyzed and the spatio-temporal characteristics of respective sub-ionospheric perturbations has already been studied by earlier workers using 2D-Finite Difference Time Domain method of simulation. In this work, we determine the spatial scale, depth and temporal dependence of lower ionospheric perturbation in consistence with umbral and penumbral motion. We considered the 2-parameter D-region ionospheric model with exponential electron density profile. To model the solar obscuration effect over it, we assumed a generalized space-time dependent 2-dimensional elliptical Gaussian distribution for ionospheric parameters, such as, effective reflection height (h') and sharpness factor (β). The depth (△hmax, △βmax), center of shadow (lato(t), lono(t)) and spatial scale (σlat,lon) of that Gaussian distribution are used as model parameters. In the vicinity of the eclipse zone, we compute the VLF signal perturbations using Long Wave Propagation Capability (LWPC) code for several signal propagation paths. The propagation path characteristics, such as, ground and water conductivity and geomagnetic effect on ionosphere are considered from standard LWPC prescriptions. The model parameters are tuned to set an optimum agreement between our computation and observed positive and negative type of VLF perturbations. Thus

Using a neural network approach for muon reconstruction and triggering

CERN Document Server

Etzion, E; Abramowicz, H; Benhammou, Ya; Horn, D; Levinson, L; Livneh, R

2004-01-01

The extremely high rate of events that will be produced in the future Large Hadron Collider requires the triggering mechanism to take precise decisions in a few nano-seconds. We present a study which used an artificial neural network triggering algorithm and compared it to the performance of a dedicated electronic muon triggering system. Relatively simple architecture was used to solve a complicated inverse problem. A comparison with a realistic example of the ATLAS first level trigger simulation was in favour of the neural network. A similar architecture trained after the simulation of the electronics first trigger stage showed a further background rejection.

Cooperative Electronic Attack using Unmanned Air Vehicles

National Research Council Canada - National Science Library

Mears, Mark J

2006-01-01

... that are salient in the context of cooperative control. The utility of electronic attack is described in the context of integrated air defense systems that rely on RADAR sites that act as a network to gather information about potential airborne threats...

An electronic regulatory document management system for a clinical trial network.

Science.gov (United States)

Zhao, Wenle; Durkalski, Valerie; Pauls, Keith; Dillon, Catherine; Kim, Jaemyung; Kolk, Deneil; Silbergleit, Robert; Stevenson, Valerie; Palesch, Yuko

2010-01-01

A computerized regulatory document management system has been developed as a module in a comprehensive Clinical Trial Management System (CTMS) designed for an NIH-funded clinical trial network in order to more efficiently manage and track regulatory compliance. Within the network, several institutions and investigators are involved in multiple trials, and each trial has regulatory document requirements. Some of these documents are trial specific while others apply across multiple trials. The latter causes a possible redundancy in document collection and management. To address these and other related challenges, a central regulatory document management system was designed. This manuscript shares the design of the system as well as examples of it use in current studies. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Webmail: an Automated Web Publishing System

Science.gov (United States)

Bell, David

A system for publishing frequently updated information to the World Wide Web will be described. Many documents now hosted by the NOAO Web server require timely posting and frequent updates, but need only minor changes in markup or are in a standard format requiring only conversion to HTML. These include information from outside the organization, such as electronic bulletins, and a number of internal reports, both human and machine generated. Webmail uses procmail and Perl scripts to process incoming email messages in a variety of ways. This processing may include wrapping or conversion to HTML, posting to the Web or internal newsgroups, updating search indices or links on related pages, and sending email notification of the new pages to interested parties. The Webmail system has been in use at NOAO since early 1997 and has steadily grown to include fourteen recipes that together handle about fifty messages per week.

Neural networks within multi-core optic fibers.

Science.gov (United States)

Cohen, Eyal; Malka, Dror; Shemer, Amir; Shahmoon, Asaf; Zalevsky, Zeev; London, Michael

2016-07-07

Hardware implementation of artificial neural networks facilitates real-time parallel processing of massive data sets. Optical neural networks offer low-volume 3D connectivity together with large bandwidth and minimal heat production in contrast to electronic implementation. Here, we present a conceptual design for in-fiber optical neural networks. Neurons and synapses are realized as individual silica cores in a multi-core fiber. Optical signals are transferred transversely between cores by means of optical coupling. Pump driven amplification in erbium-doped cores mimics synaptic interactions. We simulated three-layered feed-forward neural networks and explored their capabilities. Simulations suggest that networks can differentiate between given inputs depending on specific configurations of amplification; this implies classification and learning capabilities. Finally, we tested experimentally our basic neuronal elements using fibers, couplers, and amplifiers, and demonstrated that this configuration implements a neuron-like function. Therefore, devices similar to our proposed multi-core fiber could potentially serve as building blocks for future large-scale small-volume optical artificial neural networks.

Electron/pion identification in the CBM TRD using a multilayer perceptron

International Nuclear Information System (INIS)

Akishina, E.P.; Akishina, T.P.; Ivanov, V.V.; Maevskaya, A.I.; Afanas'ev, O.A.

2008-01-01

The problem of electron/pion identification in the CBM experiment based on the measurements of energy losses and transition radiation in the TRD detector is discussed. A possibility to solve such a problem by applying an artificial neural network (ANN) is considered. As input information for the network we used both the samples of energy losses of pions or electrons in the TRD absorbers and the 'clever' variable obtained on the basis of the original data. We show that usage of this new variable permits one to reach a reliable level of particle recognition no longer than after 10-20 training epochs; there are practically no fluctuations against the trend, and the needed level of pions suppression is obtained under the condition of a minimal loss of electrons

Why social network analysis is important to Air Force applications

Science.gov (United States)

Havig, Paul R.; McIntire, John P.; Geiselman, Eric; Mohd-Zaid, Fairul

2012-06-01

Social network analysis is a powerful tool used to help analysts discover relationships amongst groups of people as well as individuals. It is the mathematics behind such social networks as Facebook and MySpace. These networks alone cause a huge amount of data to be generated and the issue is only compounded once one adds in other electronic media such as e-mails and twitter. In this paper we outline the basics of social network analysis and how it may be used in current and future Air Force applications.

High speed all-optical networks

Science.gov (United States)

Chlamtac, Imrich

1993-01-01

An inherent problem of conventional point-to-point WAN architectures is that they cannot translate optical transmission bandwidth into comparable user available throughput due to the limiting electronic processing speed of the switching nodes. This report presents the first solution to WDM based WAN networks that overcomes this limitation. The proposed Lightnet architecture takes into account the idiosyncrasies of WDM switching/transmission leading to an efficient and pragmatic solution. The Lightnet architecture trades the ample WDM bandwidth for a reduction in the number of processing stages and a simplification of each switching stage, leading to drastically increased effective network throughputs.

The Networking and Information Technology Research and Development NITRD Program 2012 Strategic Plan

Data.gov (United States)

Networking and Information Technology Research and Development, Executive Office of the President — Information technology IT computers, wired and wireless digital networks, electronic data and information, IT devices and systems, and software applications?today...

Neuro-Inspired Computing with Stochastic Electronics

KAUST Repository

Naous, Rawan

2016-01-06

The extensive scaling and integration within electronic systems have set the standards for what is addressed to as stochastic electronics. The individual components are increasingly diverting away from their reliable behavior and producing un-deterministic outputs. This stochastic operation highly mimics the biological medium within the brain. Hence, building on the inherent variability, particularly within novel non-volatile memory technologies, paves the way for unconventional neuromorphic designs. Neuro-inspired networks with brain-like structures of neurons and synapses allow for computations and levels of learning for diverse recognition tasks and applications.

Image processing with a cellular nonlinear network

International Nuclear Information System (INIS)

Morfu, S.

2005-01-01

A cellular nonlinear network (CNN) based on uncoupled nonlinear oscillators is proposed for image processing purposes. It is shown theoretically and numerically that the contrast of an image loaded at the nodes of the CNN is strongly enhanced, even if this one is initially weak. An image inversion can be also obtained without reconfiguration of the network whereas a gray levels extraction can be performed with an additional threshold filtering. Lastly, an electronic implementation of this CNN is presented

Sensor Networks, Dataloggers, and Other Handy Gadgets Using Open-Source Electronics for the Christina River Basin CZO

Science.gov (United States)

Hicks, S. D.; Aufdenkampe, A. K.; Montgomery, D. S.

2011-12-01

The search for biogeochemical "hot spots" and "hot moments" that control ecosystem-level processes requires a rethinking of how we observe the environment. Extensive multi-sensor/measurement arrays are required to realize 2D, 3D, or 4D maps of environmental properties with sufficient spatial and temporal resolution to find and understand hot spots and hot moments. To date, the cost of the data logging and communication infrastructure has been a major limitation to large-scale sensor deployment, especially for near-real-time (NRT) wireless networks. A low-cost, user-friendly alternative is needed so that resources can be prioritized toward sensor hardware rather than data acquisition and communication hardware. A flexible development platform would also allow for easy creation of other useful devices in addition to the already apparent need for economical dataloggers. The recent proliferation of open-source electronics platforms offers an opportunity for environmental observatories to deploy sensors at large scales by reducing data logging and communications costs by more than an order of magnitude. Leading the open-source electronics revolution is the Arduino project, designed to make the process of using electronics in multidisciplinary projects more accessible to hobbyists and professionals alike. A large user community has developed and shared hundreds of practical applications for projects that interface with a variety of sensors and use embedded logic to control external hardware. Likewise, dozens of companies and individuals sell low-cost Arduino-compatible boards that can connect together in a modular framework, allowing the user to quickly create devices for a wide range of applications. Based on these open-source technologies and products, we are designing and building a variety of circuit devices for use in our research watersheds. One Arduino-based device is a multi-channel datalogger that can be used with a variety of analog and digital sensors, such as

Electronic Communication in Africa--the Promotion of Animal Health Information Dissemination.

Science.gov (United States)

van der Westhuizen, Erica E.; Miller, E. Stan

1995-01-01

Discusses how the Veterinary Science Library at the University of Pretoria (South Africa) promotes electronic communication through various Internet and other network links. Provides a sample of online information sources available to veterinary teams and animal health workers, and a list of electronic addresses for South African libraries and…

A last updating evolution model for online social networks

Science.gov (United States)

Bu, Zhan; Xia, Zhengyou; Wang, Jiandong; Zhang, Chengcui

2013-05-01

As information technology has advanced, people are turning to electronic media more frequently for communication, and social relationships are increasingly found on online channels. However, there is very limited knowledge about the actual evolution of the online social networks. In this paper, we propose and study a novel evolution network model with the new concept of “last updating time”, which exists in many real-life online social networks. The last updating evolution network model can maintain the robustness of scale-free networks and can improve the network reliance against intentional attacks. What is more, we also found that it has the “small-world effect”, which is the inherent property of most social networks. Simulation experiment based on this model show that the results and the real-life data are consistent, which means that our model is valid.

A Communication network for LHC detector readout

International Nuclear Information System (INIS)

Romero, L.

1993-01-01

This paper describe a network architecture for data taking in LHC environment. The network is composed of 64 rings of point to point links working at 100 Mbytes/s. The network connect the front end electronics, computer farms and two data switches. The efficiency of the system is discussed. Using extracted 1 Kbyte events for the 2nd level trigger and whole 1 Mbyte events for the 3rd level trigger, then the system can sustain working rates of 2 x 10''5 and 2 x 10''3 events/s going into the 2nd and 3rd level triggers. System resistance to errors is discussed. (Author) 3 refs

A communication network for LHC detector readout

International Nuclear Information System (INIS)

Romero, L.

1993-01-01

This paper describe a network architecture for data taking in LHC environment. The network is composed of 64 rings of point to point links working at 100 Mbytes/s. The network connect the front end electronics, computer farms and two data switches. The efficiency of the system is discussed. Using extracted 1 kbyte events for the 2nd level trigger and whole 1 Mbyte events for the 3rd level trigger, then the system can sustain working rates of 2 x 10''5 and 2 x 10''3events/s going into the 2nd and 3rd level triggers. System resistance to errors is discussed. (Author)

A Communication network for LHC detector readout

Energy Technology Data Exchange (ETDEWEB)

Romero, L

1993-07-01

This paper describe a network architecture for data taking in LHC environment. The network is composed of 64 rings of point to point links working at 100 Mbytes/s. The network connect the front end electronics, computer farms and two data switches. The efficiency of the system is discussed. Using extracted 1 Kbyte events for the 2nd level trigger and whole 1 Mbyte events for the 3rd level trigger, then the system can sustain working rates of 2 x 10''5 and 2 x 10''3 events/s going into the 2nd and 3rd level triggers. System resistance to errors is discussed. (Author) 3 refs.

SCIENTIFIC PROGRESS OF THE MC-PAD NETWORK

CERN Document Server

Aguilar, J; Ambalathankandy, P; Apostolakis, J; Arora, R; Balog, T; Behnke, T; Beltrame, P; Bencivenni, G; Caiazza, S; Dong, J; Heller, M; Heuser, J; Idzik, M; Joram, C; Klanner, R; Koffeman, E; Korpar, S; Kramberger, G; Lohmann, W; Milovanović, M; Miscetti, S; Moll, M; Novgorodova, O; Pacifico, N; Pirvutoiu, C; Radu, R; Rahman, S; Rohe, T; Ropelewski, L; Roukoutakis, F; Schmidt, C; Schön, R; Sibille, J; Tsagri, M; Turala, M; Van Beuzekom, M; Verheyden, R; Villa, M; Zappon, F; Zawiejski, L; Zhang, J

2013-01-01

MC-PAD is a multi-site Initial Training Network on particle detectors in physics experiments. It comprises nine academic participants, three industrial partners and two associated academic partners. 17 recruited Early Stage and 5 Experienced Researchers have performed their scientific work in the network. The research and development work of MC-PAD is organized in 12 work packages, which focus on a large variety of aspects of particle detector development, electronics as well as simulation and modelling. The network was established in November 2008 and lasted until October 2012 (48 months). This report describes the R&D activities and highlights the main results achieved during this period.

Novel model of a AlGaN/GaN high electron mobility transistor based on an artificial neural network

International Nuclear Information System (INIS)

Cheng Zhi-Qun; Hu Sha; Liu Jun; Zhang Qi-Jun

2011-01-01

In this paper we present a novel approach to modeling AlGaN/GaN high electron mobility transistor (HEMT) with an artificial neural network (ANN). The AlGaN/GaN HEMT device structure and its fabrication process are described. The circuit-based Neuro-space mapping (neuro-SM) technique is studied in detail. The EEHEMT model is implemented according to the measurement results of the designed device, which serves as a coarse model. An ANN is proposed to model AlGaN/GaN HEMT based on the coarse model. Its optimization is performed. The simulation results from the model are compared with the measurement results. It is shown that the simulation results obtained from the ANN model of AlGaN/GaN HEMT are more accurate than those obtained from the EEHEMT model. (condensed matter: structural, mechanical, and thermal properties)

Electronic Health Object

Science.gov (United States)

Almunawar, Mohammad Nabil; Anshari, Muhammad; Younis, Mustafa Z.; Kisa, Adnan

2015-01-01

Electronic health records (EHRs) store health-related patient information in an electronic format, improving the quality of health care management and increasing efficiency of health care processes. However, in existing information systems, health-related records are generated, managed, and controlled by health care organizations. Patients are perceived as recipients of care and normally cannot directly interact with the system that stores their health-related records; their participation in enriching this information is not possible. Many businesses now allow customers to participate in generating information for their systems, strengthening customer relationships. This trend is supported by Web 2.0, which enables interactivity through various means, including social networks. Health care systems should be able to take advantage of this development. This article proposes a novel framework in addressing the emerging need for interactivity while preserving and extending existing electronic medical data. The framework has 3 dimensions of patient health record: personal, social, and medical dimensions. The framework is designed to empower patients, changing their roles from static recipient of health care services to dynamic and active partners in health care processes. PMID:26660486

Network Connection Management

CERN Document Server

IT Department, Communication Systems and Network Group

2005-01-01

The CERN network database is a key element of the CERN network infrastructure. It is absolutely essential that its information is kept up-to-date for security reasons and to ensure a smooth running of the network infrastructure. Over the years, some of the information in the database has become obsolete. The database therefore needs to be cleaned up, for which we are requesting your help. In the coming weeks, you may receive an electronic mail from Netops.database@cern.ch relating to the clean-up. If you receive such a message, it will be for one of the following reasons: You are the person responsible for or the main user of a system for which a problem has been detected, or You have been the supervisor of a person who has now left CERN (according to the HR database), or The problem has been passed up to you because someone under your supervision has not taken the necessary action within four weeks of notification. Just open the link that will be included in the message and follow the instructions....

Network Connection Management

CERN Multimedia

IT Department

2005-01-01

The CERN network database is a key element of the CERN network infrastructure. It is absolutely essential that its information is kept up-to-date for security reasons and to ensure smooth running of the network infrastructure. Over the years, some of the information in the database has become obsolete. The database therefore needs to be cleaned up, for which we are requesting your help. In the coming weeks, you may receive an electronic mail from Netops.database@cern.ch relating to the clean-up. If you receive such a message, it will be for one of the following reasons: You are the person responsible for or the main user of a system for which a problem has been detected, or You have been the supervisor of a person who has now left CERN (according to the HR database), or The problem has been passed up to you because someone under your supervision has not taken the necessary action within four weeks of notification. Just open the link that will be included in the message and follow the instructions. Thank ...

Multicast routing for wavelength-routed WDM networks with dynamic membership

Science.gov (United States)

Huang, Nen-Fu; Liu, Te-Lung; Wang, Yao-Tzung; Li, Bo

2000-09-01

Future broadband networks must support integrated services and offer flexible bandwidth usage. In our previous work, we explore the optical link control layer on the top of optical layer that enables the possibility of bandwidth on-demand service directly over wavelength division multiplexed (WDM) networks. Today, more and more applications and services such as video-conferencing software and Virtual LAN service require multicast support over the underlying networks. Currently, it is difficult to provide wavelength multicast over the optical switches without optical/electronic conversions although the conversion takes extra cost. In this paper, based on the proposed wavelength router architecture (equipped with ATM switches to offer O/E and E/O conversions when necessary), a dynamic multicast routing algorithm is proposed to furnish multicast services over WDM networks. The goal is to joint a new group member into the multicast tree so that the cost, including the link cost and the optical/electronic conversion cost, is kept as less as possible. The effectiveness of the proposed wavelength router architecture as well as the dynamic multicast algorithm is evaluated by simulation.

Electronic device, system on chip ad method of monitoring data traffic

NARCIS (Netherlands)

2011-01-01

Therefore, an electronic device is provided which comprises a plurality of processing units (IP1-IP6), and a network-based interconnect (N) coupling the processing units (IP1-IP6) for enabling at least one first communication path (C) between the processing units (IP1-IP6). The electronic device

Power Electronic Systems for Switched Reluctance Generator based Wind Farms and DC Networks

DEFF Research Database (Denmark)

Park, Kiwoo

enable various renewable energy sources, such as Photovoltaic (PV) and wind, to produce dc power directly. In addition, battery-based energy storage systems inherently operate with dc power. Hence, dc network (dc-grid) systems which connect these dc sources and storages directly using dc networks...... are gaining much attention again. The dc network system has a great potential to outdo the traditional ac systems in many technical challenges and could be highly profitable especially for offshore wind farm applications, where the size and weight of the components are crucial to the entire system costs......Wind power technology, as the most competitive renewable energy technology, is quickly developing. The wind turbine size is growing and the grid penetration of wind power is increasing rapidly. Recently, the developments on wind power technology pay more attentions on efficiency and reliability...

Carbon Nanotubes: Molecular Electronic Components

Science.gov (United States)

Srivastava, Deepak; Saini, Subhash; Menon, Madhu

1997-01-01

The carbon Nanotube junctions have recently emerged as excellent candidates for use as the building blocks in the formation of nanoscale molecular electronic networks. While the simple joint of two dissimilar tubes can be generated by the introduction of a pair of heptagon-pentagon defects in an otherwise perfect hexagonal graphene sheet, more complex joints require other mechanisms. In this work we explore structural characteristics of complex 3-point junctions of carbon nanotubes using a generalized tight-binding molecular-dynamics scheme. The study of pi-electron local densities of states (LDOS) of these junctions reveal many interesting features, most prominent among them being the defect-induced states in the gap.

Creating wi-fi bluetooth mesh network for crisis management applications

Science.gov (United States)

Al-Tekreeti, Safa; Adams, Christopher; Al-Jawad, Naseer

2010-04-01

This paper proposes a wireless mesh network implementation consisting of both Wi-Fi Ad-Hoc networks as well as Bluetooth Piconet/Scatternet networks, organised in an energy and throughput efficient structure. This type of networks can be easily constructed for Crises management applications, for example in an Earthquake disaster. The motivation of this research is to form mesh network from the mass availability of WiFi and Bluetooth enabled electronic devices such as mobile phones and PC's that are normally present in most regions were major crises occurs. The target of this study is to achieve an effective solution that will enable Wi-Fi and/or Bluetooth nodes to seamlessly configure themselves to act as a bridge between their own network and that of the other network to achieve continuous routing for our proposed mesh networks.

The US Nuclear Data Network

International Nuclear Information System (INIS)

1993-01-01

This report discusses the following topics: US Nuclear Data Network Meeting; TUNL A=3--20 Data Project Activity Report 1993; INEL Mass-chain Evaluation Project Activity Report for 1993; 1993 Isotopes; Nuclear Data Project Activity Report; The NNDC Activity Report Parts A and B; Minutes of the Formats and Procedures Subcommittee; Evaluation of High-spin Nuclear Data for ENSDF and Table of Superdeformed Nuclear Bands; Proposal for Support of a Experimental High-spin; Data File/Data-Network Coordinator; Radioactive Decay and Applications; A Plan for a Horizontal Evaluation of Decay Data; ENSDF On-line System; The MacNuclide Project Expanding the Scope of the Nuclear Structure Reference File; ENSDAT: Evaluated Nuclear Structure Drawings and Tables; Cross Section Evaluation Working Group (CSEWG) and CSEWG Strategy Session; A Draft Proposal for a USNDN Program Advisory Council; Recommendations of Focus Group 1; Recommendations of Focus Group 2; Recommendations of Focus Group 3; Recommendations of Focus Group 4; The Table of Isotopes; The Isotopes CD-ROM; Electronic Table of Isotopes (ETOI); and Electronic Access to Nuclear Data

The US Nuclear Data Network

Energy Technology Data Exchange (ETDEWEB)

1993-10-19

This report discusses the following topics: US Nuclear Data Network Meeting; TUNL A=3--20 Data Project Activity Report 1993; INEL Mass-chain Evaluation Project Activity Report for 1993; 1993 Isotopes; Nuclear Data Project Activity Report; The NNDC Activity Report Parts A and B; Minutes of the Formats and Procedures Subcommittee; Evaluation of High-spin Nuclear Data for ENSDF and Table of Superdeformed Nuclear Bands; Proposal for Support of a Experimental High-spin; Data File/Data-Network Coordinator; Radioactive Decay and Applications; A Plan for a Horizontal Evaluation of Decay Data; ENSDF On-line System; The MacNuclide Project Expanding the Scope of the Nuclear Structure Reference File; ENSDAT: Evaluated Nuclear Structure Drawings and Tables; Cross Section Evaluation Working Group (CSEWG) and CSEWG Strategy Session; A Draft Proposal for a USNDN Program Advisory Council; Recommendations of Focus Group 1; Recommendations of Focus Group 2; Recommendations of Focus Group 3; Recommendations of Focus Group 4; The Table of Isotopes; The Isotopes CD-ROM; Electronic Table of Isotopes (ETOI); and Electronic Access to Nuclear Data.

Artificial neural network applications in ionospheric studies

Directory of Open Access Journals (Sweden)

L. R. Cander

1998-06-01

Full Text Available The ionosphere of Earth exhibits considerable spatial changes and has large temporal variability of various timescales related to the mechanisms of creation, decay and transport of space ionospheric plasma. Many techniques for modelling electron density profiles through entire ionosphere have been developed in order to solve the "age-old problem" of ionospheric physics which has not yet been fully solved. A new way to address this problem is by applying artificial intelligence methodologies to current large amounts of solar-terrestrial and ionospheric data. It is the aim of this paper to show by the most recent examples that modern development of numerical models for ionospheric monthly median long-term prediction and daily hourly short-term forecasting may proceed successfully applying the artificial neural networks. The performance of these techniques is illustrated with different artificial neural networks developed to model and predict the temporal and spatial variations of ionospheric critical frequency, f0F2 and Total Electron Content (TEC. Comparisons between results obtained by the proposed approaches and measured f0F2 and TEC data provide prospects for future applications of the artificial neural networks in ionospheric studies.

CompTIA network+ study guide exam N10-006

CERN Document Server

Lammle, Todd

2015-01-01

All-star N10-006 prep, fully updated for the new exam The CompTIA Network+ Study Guide is your one-stop comprehensive resource in preparing for exam N10-006 Bestselling author and networking Guru Todd Lammle guides you through 100% of all exam objectives detailing the fundamental concepts you will need to know to prepare for the exam. Coverage includes network technologies, installation and configuration, media and topologies, security, and much more, plus practical examples drawn from real-world situations. You also gain access to practice exams and electronic flashcards that facilitate info

Email networks and the spread of computer viruses

Science.gov (United States)

Newman, M. E.; Forrest, Stephanie; Balthrop, Justin

2002-09-01

Many computer viruses spread via electronic mail, making use of computer users' email address books as a source for email addresses of new victims. These address books form a directed social network of connections between individuals over which the virus spreads. Here we investigate empirically the structure of this network using data drawn from a large computer installation, and discuss the implications of this structure for the understanding and prevention of computer virus epidemics.

Neural-Network Control Of Prosthetic And Robotic Hands

Science.gov (United States)

Buckley, Theresa M.

1991-01-01

Electronic neural networks proposed for use in controlling robotic and prosthetic hands and exoskeletal or glovelike electromechanical devices aiding intact but nonfunctional hands. Specific to patient, who activates grasping motion by voice command, by mechanical switch, or by myoelectric impulse. Patient retains higher-level control, while lower-level control provided by neural network analogous to that of miniature brain. During training, patient teaches miniature brain to perform specialized, anthropomorphic movements unique to himself or herself.

A DRM Security Architecture for Home Networks

NARCIS (Netherlands)

Popescu, B.C.; Crispo, B.; Kamperman, F.L.A.J.; Tanenbaum, A.S.; Kiayias, A.; Yung, M.

2004-01-01

This paper describes a security architecture allowing digital rights management in home networks consisting of consumer electronic devices. The idea is to allow devices to establish dynamic groups, so called "Authorized Domains", where legally acquired copyrighted content can seamlessly move from

Licensing Support Network: An Electronic Discovery System

International Nuclear Information System (INIS)

Gil, A. V.; Jensen, D.; McKinnon, B.

2002-01-01

The necessary authorization for the U. S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) to submit a License Application (LA) is contingent upon the policy process defined in the Nuclear Waste Policy Act, as amended (NWPA), with some steps yet to occur. In spite of this uncertainty, the DOE must take prudent and appropriate action now, and over the next several years, to prepare for submittal of an application and to facilitate the U. S. Nuclear Regulatory Commission (NRC) review of this application, if the Yucca Mountain site is recommended and approved for repository development. One of these steps the DOE has taken involves working with the NRC's Advisory Review Panel to develop Licensing Support Network (LSN) requirements and guidelines. The NRC has made a prototype of the LSN web page available at www.LSNNET.gov. The OCRWM part of the LSN currently has an indefinite life cycle and may need to remain in existence until the repository is closed, which could be as long as 325 years

Experimental demonstrations of all-optical networking functions for WDM optical networks

Science.gov (United States)

Gurkan, Deniz

The deployment of optical networks will enable high capacity links between users but will introduce the problems associated with transporting and managing more channels. Many network functions should be implemented in optical domain; main reasons are: to avoid electronic processing bottlenecks, to achieve data-format and data-rate independence, to provide reliable and cost efficient control and management information, to simultaneously process multiple wavelength channel operation for wavelength division multiplexed (WDM) optical networks. The following novel experimental demonstrations of network functions in the optical domain are presented: Variable-bit-rate recognition of the header information in a data packet. The technique is reconfigurable for different header sequences and uses optical correlators as look-up tables. The header is processed and a signal is sent to the switch for a series of incoming data packets at 155 Mb/s, 622 Mb/s, and 2.5 Gb/s in a reconfigurable network. Simultaneous optical time-slot-interchange and wavelength conversion of the bits in a 2.5-Gb/s data stream to achieve a reconfigurable time/wavelength switch. The technique uses difference-frequency-generation (DFG) for wavelength conversion and fiber Bragg gratings (FBG) as wavelength-dependent optical time buffers. The WDM header recognition module simultaneously recognizing two header bits on each of two 2.5-Gbit/s WDM packet streams. The module is tunable to enable reconfigurable look-up tables. Simultaneous and independent label swapping and wavelength conversion of two WDM channels for a multi-protocol label switching (MPLS) network. Demonstration of label swapping of distinct 8-bit-long labels for two WDM data channels is presented. Two-dimensional code conversion module for an optical code-division multiple-access (O-CDMA) local area network (LAN) system. Simultaneous wavelength conversion and time shifting is achieved to enable flexible code conversion and increase code re

Computer networks and their implications for nuclear data

International Nuclear Information System (INIS)

Carlson, J.

1992-01-01

Computer networks represent a valuable resource for accessing information. Just as the computer has revolutionized the ability to process and analyze information, networks have and will continue to revolutionize data collection and access. A number of services are in routine use that would not be possible without the presence of an (inter)national computer network (which will be referred to as the internet). Services such as electronic mail, remote terminal access, and network file transfers are almost a required part of any large scientific/research organization. These services only represent a small fraction of the potential uses of the internet; however, the remainder of this paper discusses some of these uses and some technological developments that may influence these uses

Hydration of excess electrons trapped in charge pockets on molecular surfaces

Science.gov (United States)

Jalbout, Abraham F.; Del Castillo, R.; Adamowicz, Ludwik

2007-01-01

In this work we strive to design a novel electron trap located on a molecular surface. The process of electron trapping involves hydration of the trapped electron. Previous calculations on surface electron trapping revealed that clusters of OH groups can form stable hydrogen-bonded networks on one side of a hydrocarbon surface (i.e. cyclohexane sheets), while the hydrogen atoms on the opposite side of the surface form pockets of positive charge that can attract extra negative charge. The excess electron density on such surfaces can be further stabilized by interactions with water molecules. Our calculations show that these anionic systems are stable with respect to vertical electron detachment (VDE).

Secure electronic commerce communication system based on CA

Science.gov (United States)

Chen, Deyun; Zhang, Junfeng; Pei, Shujun

2001-07-01

In this paper, we introduce the situation of electronic commercial security, then we analyze the working process and security for SSL protocol. At last, we propose a secure electronic commerce communication system based on CA. The system provide secure services such as encryption, integer, peer authentication and non-repudiation for application layer communication software of browser clients' and web server. The system can implement automatic allocation and united management of key through setting up the CA in the network.

Rapid Production Ramp-up for International Collaborative Supply Network in Electronics Goods Industry (X-Box, PS II, I-Pod, Etc) A Review of Existing Practices, Issues, and Challenges

OpenAIRE

Hu, Ning

2006-01-01

The fierce competition of international consumer electronics market has brought more pressures on the manufacturing section especially in the context of globalization. The global producers have to find effective solution to cope with the challenges such as shorter and shorter product life, less and less customer loyalty and resources limitation. The fact that rapid production ramp up and supply network collaboration could benefit their performance has been recognized by many business giants s...

A Communication network for LHC detector readout

Energy Technology Data Exchange (ETDEWEB)

Romero, L.

1993-07-01

This paper describe a network architecture for data taking in LHC environment. The network is composed of 64 rings of point to point links working at 100 Mbytes/s. The network connect the front end electronics, computer farms and two data switches. The efficiency of the system is discussed. Using extracted 1 Kbyte events for the 2nd level trigger and whole 1 Mbyte events for the 3rd level trigger, then the system can sustain working rates of 2 x 10''5 and 2 x 10''3 events/s going into the 2nd and 3rd level triggers. System resistance to errors is discussed. (Author) 3 refs.

RFID-based Electronic Identity Security Cloud Platform in Cyberspace

OpenAIRE

Bing Chen; Chengxiang Tan; Bo Jin; Xiang Zou; Yuebo Dai

2012-01-01

With the moving development of networks, especially Internet of Things, electronic identity administration in cyberspace is becoming more and more important. And personal identity management in cyberspace associated with individuals in reality has been one significant and urgent task for the further development of information construction in China. So this paper presents a RFID-based electronic identity security cloud platform in cyberspace to implement an efficient security management of cyb...

A new electronic control system for unmanned underwater vehicles

OpenAIRE

Molina Molina, J.C.; Guerrero González, A.; Gilabert, J.

2015-01-01

In this paper a new electronic control system for unmanned underwater vehicles is presented. This control system is characterized by a distribution in control over two network of type CANBus and Ethernet. This new electronic control system integrates functionalities of AUVs, as the automatic execution of preprogrammed trajectories. The control system also integrates an acoustic positioning system based on USBL. The information of relative positioning is sent through specific...

Novel model of a AlGaN/GaN high electron mobility transistor based on an artificial neural network

Science.gov (United States)

Cheng, Zhi-Qun; Hu, Sha; Liu, Jun; Zhang, Qi-Jun

2011-03-01

In this paper we present a novel approach to modeling AlGaN/GaN high electron mobility transistor (HEMT) with an artificial neural network (ANN). The AlGaN/GaN HEMT device structure and its fabrication process are described. The circuit-based Neuro-space mapping (neuro-SM) technique is studied in detail. The EEHEMT model is implemented according to the measurement results of the designed device, which serves as a coarse model. An ANN is proposed to model AlGaN/GaN HEMT based on the coarse model. Its optimization is performed. The simulation results from the model are compared with the measurement results. It is shown that the simulation results obtained from the ANN model of AlGaN/GaN HEMT are more accurate than those obtained from the EEHEMT model. Project supported by the National Natural Science Foundation of China (Grant No. 60776052).

Network biology concepts in complex disease comorbidities

DEFF Research Database (Denmark)

Hu, Jessica Xin; Thomas, Cecilia Engel; Brunak, Søren

2016-01-01

collected electronically, disease co-occurrences are starting to be quantitatively characterized. Linking network dynamics to the real-life, non-ideal patient in whom diseases co-occur and interact provides a valuable basis for generating hypotheses on molecular disease mechanisms, and provides knowledge......The co-occurrence of diseases can inform the underlying network biology of shared and multifunctional genes and pathways. In addition, comorbidities help to elucidate the effects of external exposures, such as diet, lifestyle and patient care. With worldwide health transaction data now often being...

EDITORIAL: Synaptic electronics Synaptic electronics

Science.gov (United States)

Demming, Anna; Gimzewski, James K.; Vuillaume, Dominique

2013-09-01

edge of chaos, where complex phenomena, including creativity and intelligence, may emerge'. Also in this issue R Stanley Williams and colleagues report results from simulations that demonstrate the potential for using Mott transistors as building blocks for scalable neuristor-based integrated circuits without transistors [5]. The scalability of neural chip designs is also tackled in the design reported by Narayan Srinivasa and colleagues in the US [6]. Meanwhile Carsten Timm and Massimiliano Di Ventra describe simulations of a molecular transistor in which electrons strongly coupled to a vibrational mode lead to a Franck-Condon (FC) blockade that mimics the spiking action potentials in synaptic memory behaviour [7]. The 'atomic switches' used to demonstrate synaptic behaviour by a collaboration of researchers in California and Japan also come under further scrutiny in this issue. James K Gimzewski and colleagues consider the difference between the behaviour of an atomic switch in isolation and in a network [8]. As the authors point out, 'The work presented represents steps in a unified approach of experimentation and theory of complex systems to make atomic switch networks a uniquely scalable platform for neuromorphic computing'. Researchers in Germany [9] and Sweden [10] also report on theoretical approaches to modelling networks of memristive elements and complementary resistive switches for synaptic devices. As Vincent Derycke and colleagues in France point out, 'Actual experimental demonstrations of neural network type circuits based on non-conventional/non-CMOS memory devices and displaying function learning capabilities remain very scarce'. They describe how their work using carbon nanotubes provides a rare demonstration of actual function learning with synapses based on nanoscale building blocks [11]. However, this is far from the only experimental work reported in this issue, others include: short-term memory of TiO2-based electrochemical capacitors [12]; a

Complexities of the storm-time characteristics of ionospheric total electron content

International Nuclear Information System (INIS)

Kane, R.P.

1982-01-01

The complexities of the storm-time variations of the ionospheric total electron content are briefly reviewed. It is suggested that large variations from storm to storm may be due to irregular flows from the auroral region towards equator. A proper study of such flows needs an elaborate network of TEC measuring instruments. The need of planning and organizing such a network is emphasized

Low-Power Wireless Sensor Network Infrastructures

DEFF Research Database (Denmark)

Hansen, Morten Tranberg

Advancements in wireless communication and electronics improving form factor and hardware capabilities has expanded the applicability of wireless sensor networks. Despite these advancements, devices are still limited in terms of energy which creates the need for duty-cycling and low-power protocols...... peripherals need to by duty-cycled and the low-power wireless radios are severely influenced by the environmental effects causing bursty and unreliable wireless channels. This dissertation presents a communication stack providing services for low-power communication, secure communication, data collection......, and network management which enables construction of low-power wireless sensor network applications. More specifically, these services are designed with the extreme low-power scenarios of the SensoByg project in mind and are implemented as follows. First, low-power communication is implemented with Auto...

Distributed Data Networks That Support Public Health Information Needs.

Science.gov (United States)

Tabano, David C; Cole, Elizabeth; Holve, Erin; Davidson, Arthur J

Data networks, consisting of pooled electronic health data assets from health care providers serving different patient populations, promote data sharing, population and disease monitoring, and methods to assess interventions. Better understanding of data networks, and their capacity to support public health objectives, will help foster partnerships, expand resources, and grow learning health systems. We conducted semistructured interviews with 16 key informants across the United States, identified as network stakeholders based on their respective experience in advancing health information technology and network functionality. Key informants were asked about their experience with and infrastructure used to develop data networks, including each network's utility to identify and characterize populations, usage, and sustainability. Among 11 identified data networks representing hundreds of thousands of patients, key informants described aggregated health care clinical data contributing to population health measures. Key informant interview responses were thematically grouped to illustrate how networks support public health, including (1) infrastructure and information sharing; (2) population health measures; and (3) network sustainability. Collaboration between clinical data networks and public health entities presents an opportunity to leverage infrastructure investments to support public health. Data networks can provide resources to enhance population health information and infrastructure.

Determining degree of roasting in cocoa beans by artificial neural network (ANN)-based electronic nose system and gas chromatography/mass spectrometry (GC/MS).

Science.gov (United States)

Tan, Juzhong; Kerr, William L

2018-08-01

Roasting is a critical step in chocolate processing, where moisture content is decreased and unique flavors and texture are developed. The determination of the degree of roasting in cocoa beans is important to ensure the quality of chocolate. Determining the degree of roasting relies on human specialists or sophisticated chemical analyses that are inaccessible to small manufacturers and farmers. In this study, an electronic nose system was constructed consisting of an array of gas sensors and used to detect volatiles emanating from cocoa beans roasted for 0, 20, 30 and 40 min. The several signals were used to train a three-layer artificial neural network (ANN). Headspace samples were also analyzed by gas chromatography/mass spectrometry (GC/MS), with 23 select volatiles used to train a separate ANN. Both ANNs were used to predict the degree of roasting of cocoa beans. The electronic nose had a prediction accuracy of 94.4% using signals from sensors TGS 813, 826, 822, 830, 830, 2620, 2602 and 2610. In comparison, the GC/MS predicted the degree of roasting with an accuracy of 95.8%. The electronic nose system is able to predict the extent of roasting, as well as a more sophisticated approach using GC/MS. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Application of local area network technology in an engineering environment

International Nuclear Information System (INIS)

Powell, A.D.; Sokolowski, M.A.

1990-01-01

This paper reports on the application of local area network technology in an engineering environment. Mobil Research and Development Corporation Engineering, Dallas, texas has installed a local area network (LAN) linking over 85 microcomputers. This network, which has been in existence for more than three years, provides common access by all engineers to quality output devices such as laser printers and multi-color pen plotters; IBM mainframe connections; electronic mail and file transfer; and common engineering program. The network has been expanded via a wide area ethernet network to link the Dallas location with a functionally equivalent LAN of over 400 microcomputers in Princeton, N.J. Additionally, engineers on assignment at remote areas in Europe, U.S., Africa and project task forces have dial-in access to the network via telephone lines

Comprehensive Power Losses Model for Electronic Power Transformer

DEFF Research Database (Denmark)

Yue, Quanyou; Li, Canbing; Cao, Yijia

2018-01-01

and considering the impact of the non-unity power factor and the three-phase unbalanced current, the overall power losses in the distribution network when using the EPT to replace the conventional transformer is analyzed, and the conditions in which the application of the EPT can cause less power losses...... reduced power losses in the distribution network require a comprehensive consideration when comparing the power losses of theEPT and conventional transformer. In this paper, a comprehensive power losses analysis model for the EPT in distribution networks is proposed. By analyzing the EPT self-losses......The electronic power transformer (EPT) has highe rpower losses than the conventional transformer. However, the EPT can correct the power factor, compensate the unbalanced current and reduce the line power losses in the distribution network.Therefore, the higher losses of the EPT and the consequent...

Comprehensive Power Losses Model for Electronic Power Transformer

DEFF Research Database (Denmark)

Yue, Quanyou; Li, Canbing; Cao, Yijia

2018-01-01

The electronic power transformer (EPT) has highe rpower losses than the conventional transformer. However, the EPT can correct the power factor, compensate the unbalanced current and reduce the line power losses in the distribution network.Therefore, the higher losses of the EPT and the consequent...... reduced power losses in the distribution network require a comprehensive consideration when comparing the power losses of theEPT and conventional transformer. In this paper, a comprehensive power losses analysis model for the EPT in distribution networks is proposed. By analyzing the EPT self......-losses and considering the impact of the non-unity power factor and the three-phase unbalanced current, the overall power losses in the distribution network when using the EPT to replace the conventional transformer is analyzed, and the conditions in which the application of the EPT can cause less power losses...

Dependability in electronic systems mitigation of hardware failures, soft errors, and electro-magnetic disturbances

CERN Document Server

Kanekawa, Nobuyasu; Suga, Takashi; Uematsu, Yutaka

2011-01-01

Dependability in Electronic Systems presents practical applications for dependable electronic systems, such as train control, automotive control systems and network servers/routers. Readers will find an overview of dependability, enabling them to select the best choice for maximum results.

Conductance with stochastic resonance in Mn{sub 12} redox network without tuning

Energy Technology Data Exchange (ETDEWEB)

Hirano, Yoshiaki [Department of Chemistry, Graduate School of Science, Osaka University, 1-1 Machikaneyama-cho, Toyonaka, Osaka 560-0043 (Japan); Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507 (Japan); Segawa, Yuji; Kawai, Tomoji [Institute of Scientific and Industrial Research (ISIR), Osaka University, 8-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Kuroda-Sowa, Takayoshi [Department of Chemistry, Faculty of Science and Engineering, Kinki University, 3-4-1 Kowakae, Higashi-Osaka, Osaka 577-8502 (Japan); Matsumoto, Takuya, E-mail: matsumoto-t@chem.sci.osaka-u.ac.jp [Department of Chemistry, Graduate School of Science, Osaka University, 1-1 Machikaneyama-cho, Toyonaka, Osaka 560-0043 (Japan)

2014-06-09

Artificial neuron-based information processing is one of the attractive approaches of molecular-scale electronics, which can exploit the ability of molecular system for self-assembling or self-organization. The self-organized Mn{sub 12}/DNA redox network shows nonlinear current-voltage characteristics that can be described by the Coulomb blockade network model. As a demonstration of the nonlinear network system, we have observed stochastic resonance without tuning for weak periodic input signals and thermal noise, which suggests a route to neural network composed of molecular materials.

[Social Networks of Children with Mentally Ill Parents].

Science.gov (United States)

Stiawa, Maja; Kilian, Reinhold

2017-10-01

Social Networks of Children with Mentally Ill Parents Mental illness of parents can be a load situation for children. Supporting social relations might be an important source in such a situation. Social relations can be shown by social network analysis. Studies about social networks and mental health indicate differences regarding structure and potential for support when compared with social networks of healthy individuals. If and how mental illness of parents has an impact on their children's network is widely unknown. This systematic review shows methods and results of studies about social networks of children with mentally ill parents. By systematic search in electronic databases as well as manual search, two studies were found who met the target criteria. Both studies were conducted in the USA. Results of studies indicate that parental mental illness affects the state of mental health and social networks of children. Symptomatology of children changed due to perceived social support of network contacts. Impact of social support and strong network contacts seems to depend on age of children and the family situation. That's why support offers should be adapt to children's age. Focusing on social networks as potential resource for support and needs of the family affected seems appropriate during treatment.

Electronic phase transitions

CERN Document Server

Kopaev, YuV

1992-01-01

Electronic Phase Transitions deals with topics, which are presently at the forefront of scientific research in modern solid-state theory. Anderson localization, which has fundamental implications in many areas of solid-state physics as well as spin glasses, with its influence on quite different research activities such as neural networks, are two examples that are reviewed in this book. The ab initio statistical mechanics of structural phase transitions is another prime example, where the interplay and connection of two unrelated disciplines of solid-state theory - first principle ele

Minimal-delay traffic grooming for WDM star networks

Science.gov (United States)

Choi, Hongsik; Garg, Nikhil; Choi, Hyeong-Ah

2003-10-01

All-optical networks face the challenge of reducing slower opto-electronic conversions by managing assignment of traffic streams to wavelengths in an intelligent manner, while at the same time utilizing bandwidth resources to the maximum. This challenge becomes harder in networks closer to the end users that have insufficient data to saturate single wavelengths as well as traffic streams outnumbering the usable wavelengths, resulting in traffic grooming which requires costly traffic analysis at access nodes. We study the problem of traffic grooming that reduces the need to analyze traffic, for a class of network architecture most used by Metropolitan Area Networks; the star network. The problem being NP-complete, we provide an efficient twice-optimal-bound greedy heuristic for the same, that can be used to intelligently groom traffic at the LANs to reduce latency at the access nodes. Simulation results show that our greedy heuristic achieves a near-optimal solution.

Computer Conferencing and Electronic Messaging. Conference Proceedings (Guelph, Ontario, Canada, January 22-23, 1985).

Science.gov (United States)

Guelph Univ. (Ontario).

This 21-paper collection examines various issues in electronic networking and conferencing with computers, including design issues, conferencing in education, electronic messaging, computer conferencing applications, social issues of computer conferencing, and distributed computer conferencing. In addition to a keynote address, "Computer…

An ANFIS-based on B2C electronic commerce transaction

Science.gov (United States)

Lin, Juan; Liu, Chenlian; Guo, Yongning

2014-10-01

The purpose of this study is to use an adaptive-network-based fuzzy inference system to model a fuzzy logic-based system (FIS) for supporting decision-making process in B2C electronic commerce transaction. Firstly we introduce FIS in B2C electronic commerce transaction and ANFIS. Then we use ANFIS to model FIS with different membership functions(MF). Lastly we give a conclusion.

An ANFIS-based on B2C electronic commerce transaction

International Nuclear Information System (INIS)

Lin, Juan; Liu, Chenlian; Guo, Yongning

2014-01-01

The purpose of this study is to use an adaptive-network-based fuzzy inference system to model a fuzzy logic-based system (FIS) for supporting decision-making process in B2C electronic commerce transaction. Firstly we introduce FIS in B2C electronic commerce transaction and ANFIS. Then we use ANFIS to model FIS with different membership functions(MF). Lastly we give a conclusion

An ANFIS-based on B2C electronic commerce transaction

Energy Technology Data Exchange (ETDEWEB)

Lin, Juan, E-mail: linjuanliucaihong@qq.com [Department of Mathematics and Computer Science, Fuqing Branch of Fujian Normal University, Fuqing 350300 (China); Liu, Chenlian, E-mail: chenglian.liu@gmail.com [School of Mathematics and Computer Science, Long Yan University, Longyan 364012 (China); Guo, Yongning, E-mail: guoyn@163.com [Fuqing Branch of Fujian Normal University, Fuqing 350300 (China)

2014-10-06

The purpose of this study is to use an adaptive-network-based fuzzy inference system to model a fuzzy logic-based system (FIS) for supporting decision-making process in B2C electronic commerce transaction. Firstly we introduce FIS in B2C electronic commerce transaction and ANFIS. Then we use ANFIS to model FIS with different membership functions(MF). Lastly we give a conclusion.

A study on Optical Labelling Techniques for All-Optical Networks

DEFF Research Database (Denmark)

Holm-Nielsen, Pablo Villanueva

2005-01-01

Optical switching has been proposed as an effective solution to overcoming the potential electronic bottleneck in all-optical network nodes carrying IP over WDM. The solution builds on the use of optical labelling as a mean to route packets or bursts of packets through the network. In addition...... of an intermediate wavelength between label erasure and label insertion. The above mentioned functionalities are assembled in whole network systems experiments that validates the different labelling schemes with respect to transmission, wavelength conversion, label swapping and retransmission. Optical labelling...... and specially the orthogonal schemes for optical labelling, are thus shown to be an effective solution to all-optical networks....

Innovation, networking, and proximity: lessons from small high-technology firms in the UK

NARCIS (Netherlands)

Romijn, H.A.; Albu, Mike

2002-01-01

The article explores how the innovative performance of small high-tech firms relates to their external networking activities, and whether geographical proximity in their network relations matters. Data from a small sample of electronics firms and software developers in South East England are used to

Sensor Arrays and Electronic Tongue Systems

Directory of Open Access Journals (Sweden)

Manel del Valle

2012-01-01

Full Text Available This paper describes recent work performed with electronic tongue systems utilizing electrochemical sensors. The electronic tongues concept is a new trend in sensors that uses arrays of sensors together with chemometric tools to unravel the complex information generated. Initial contributions and also the most used variant employ conventional ion selective electrodes, in which it is named potentiometric electronic tongue. The second important variant is the one that employs voltammetry for its operation. As chemometric processing tool, the use of artificial neural networks as the preferred data processing variant will be described. The use of the sensor arrays inserted in flow injection or sequential injection systems will exemplify attempts made to automate the operation of electronic tongues. Significant use of biosensors, mainly enzyme-based, to form what is already named bioelectronic tongue will be also presented. Application examples will be illustrated with selected study cases from the Sensors and Biosensors Group at the Autonomous University of Barcelona.

Tritium-Powered Radiation Sensor Network

Science.gov (United States)

2015-09-01

Photomultiplier Tube, Scintillator, Geiger counter, Zigbee, Wireless Network, Radiation detector, Dirty Bomb 16. SECURITY CLASSIFICATION OF: 17...operational lifetime of 150 years. Persistent sensing of the environment with vibration and radiation (electromagnetic [ EM ], acoustic, gamma, etc.) in...Transportation E-field electric field EH electron-hole EM electromagnetic GaAs gallium arsenide GPS global positioning system InGaP indium gallium

Inscription and interpretation of text: a cultural hermeneutic examination of virtual community

Directory of Open Access Journals (Sweden)

Gary Burnett

2003-01-01

Full Text Available People engaging in electronic exchanges can create communities--places with socially constituted norms, values, and expectations. We adopt an anthropological perspective, yoked with a methodology based in hermeneutics, to illustrate how language use both reflects and influences culture in a virtual community. Our study analyses contributions to a Usenet newsgroup. Four elements of our conceptual model--coherence, reference, invention, and intention--provide mechanisms to examine a community's texts as it engages in social interaction and knowledge creation. While information exchange and socializing are intertwined, our model allows a robust understanding of the relationship between the two. Texts are not merely vehicles for communication but serve multiple purposes simultaneously. While they transfer information, texts also provide information within a social context, and create an expanding archive of socially-contextualized information well beyond the capabilities of any individual participant. This allows groups to negotiate reputations, socialize, and define the limits of their knowledge.

CompTIA Network+ Review Guide (Exam N10-004)

CERN Document Server

Ferguson, Bill

2009-01-01

Serving as a concise, focused study aid to help you prepare for the leading non-vendor-specific networking certification exam, this book features more review questions and study review features than any other guide, with over 120 review questions, two bonus exams, and electronic Flashcard, as well as a searchable Glossary of Terms database on CD-ROM. Fully updated for the first revision of the CompTIA Network+ exam since 2005, the book is organized by exam objectives and broken into six parts corresponding to the six domain areas of the Network+ exam: technologies, media and topologies, device

The Sensors and Instrumentation Knowledge Transfer Network

International Nuclear Information System (INIS)

Cooper, P

2009-01-01

The Sensors and Instrumentation KTN has established itself as the UK's national network in sensors and instrumentation, developing a community of over 2,250 member organisations. This paper describes the background to Knowledge Transfer Networks (KTNs) and the changes that are happening to KTNs at a national level, before describing the market size, activities and successes of the Sensors and Instrumentation KTN. The paper concludes by describing the merger between the Sensors and Instrumentation KTN and four other KTNs to create a new KTN, with a working title of the Electronics, Sensors and Photonics KTN.

Key management issue in SCADA networks: A review

Directory of Open Access Journals (Sweden)

Abdalhossein Rezai

2017-02-01

Full Text Available Supervisory Control And Data Acquisition (SCADA networks have a vital role in Critical Infrastructures (CIs such as public transports, power generation systems, gas, water and oil industries, so that there are concerns on security issues in these networks. The utilized Remote Terminal Units (RTUs and Intelligence Electronic Devices (IEDs in these networks have resource limitations, which make security applications a challenging issue. Efficient key management schemes are required besides lightweight ciphers for securing the SCADA communications. Many key management schemes have been developed to address the tradeoff between SCADA constrain and security, but which scheme is the most effective is still debatable. This paper presents a review of the existing key management schemes in SCADA networks, which provides directions for further researches in this field.

HMI Data Processing and Electronics Departmenmt. Scientific report 1984

International Nuclear Information System (INIS)

1985-01-01

The Data Processing and Electronics Department carries out application-centered R+D work in the fields of general and process-related data processing, digital and analog measuring systems, and electronic elements. As part of the HMI infrastructure, the Department carries out central data processing and electronics functions. The R+D activities of the Department and its infrastructural tasks were carried out in seven Working Groups and one Project Group: Computer systems; Mathematics and graphical data processing; Software developments; Process computer systems, hardware; Nuclear electronics, measuring and control systems; Research on structural elements and irradiation testing; Computer center and cooperation in the 'Central Project Leader Group of the German Research Network' (DFN). (orig./RB) [de

Sentiment Polarization and Balance among Users in Online Social Networks

DEFF Research Database (Denmark)

Hillmann, Robert; Trier, Matthias

2012-01-01

Communication within online social network applications enables users to express and share sentiments electronically. Existing studies examined the existence or distribution of sentiments in online communication at a general level or in small-observed groups. Our paper extends this research...... by analyzing sentiment exchange within social networks from an ego-network perspective. We draw from research on social influence and social attachment to develop theories of node polarization, balance effects and sentiment mirroring within communication dyads. Our empirical analysis covers a multitude...... of social networks in which the sentiment valence of all messages was determined. Subsequently we studied ego-networks of focal actors (ego) and their immediate contacts. Results support our theories and indicate that actors develop polarized sentiments towards individual peers but keep sentiment in balance...

Issues and Experiments in Electronic Publishing and Dissemination.

Science.gov (United States)

Hunter, Karen

1994-01-01

Examines three topics related to electronic publishing and distribution: the national context, including NREN (National Education and Research Network); issues of market readiness, funding, delivery standards, access software, intellectual property concerns, and pricing and licensing models that must be resolved; and descriptions of seven services…

Rapid assessment of agents of biological terrorism: defining the differential diagnosis of inhalational anthrax using electronic communication in a practice-based research network.

Science.gov (United States)

Temte, Jonathan L; Anderson, Anna Lisa

2004-01-01

Early detection of bioterrorism requires assessment of diagnoses assigned to cases of rare diseases with which clinicians have little experience. In this study, we evaluated the process of defining the differential diagnosis for inhalational anthrax using electronic communication within a practice-based research network (PBRN) and compared the results with those obtained from a nationwide random sample of family physicians with a mailed instrument. We distributed survey instruments by e-mail to 55 physician members of the Wisconsin Research Network (WReN), a regional PBRN. The instruments consisted of 3 case vignettes randomly drawn from a set describing 11 patients with inhalational anthrax, 2 with influenza A, and 1 with Legionella pneumonia. Physicians provided their most likely nonanthrax diagnosis, along with their responses to 4 yes-or-no management questions for each case. Physicians who had not responded at 1 week received a second e-mail with the survey instrument. The comparison group consisted of the nationwide sample of physicians who completed mailed survey instruments. Primary outcome measures were response rate, median response time, and frequencies of diagnostic categories assigned to cases of inhalational anthrax. The PBRN response rate compared favorably with that of the national sample (47.3% vs 37.0%; P = not significant). The median response time for the PBRN was significantly shorter than that for the national sample (2 vs 28 days; P < .001). No significant differences were found between the PBRN and the Midwest subset of the national sample in the frequencies of major diagnostic categories or in case management. Electronic means of creating differential diagnoses for rare infectious diseases of national significance is feasible within PBRNs. Information is much more rapidly acquired and is consistent with that obtained by conventional methods.

Detector and front-end electronics of a fissile mass flow monitoring system

International Nuclear Information System (INIS)

Paulus, M.J.; Uckan, T.; Lenarduzzi, R.; Mullens, J.A.; Castleberry, K.N.; McMillan, D.E.; Mihalczo, J.T.

1997-01-01

A detector and front-end electronics unit with secure data transmission has been designed and implemented for a fissile mass flow monitoring system for fissile mass flow of gases and liquids in a pipe. The unit consists of 4 bismuth germanate (BGO) scintillation detectors, pulse-shaping and counting electronics, local temperature sensors, and on-board local area network nodes which locally acquire data and report to the master computer via a secure network link. The signal gain of the pulse-shaping circuitry and energy windows of the pulse-counting circuitry are periodicially self calibrated and self adjusted in situ using a characteristic line in the fissile material pulse height spectrum as a reference point to compensate for drift such as in the detector gain due to PM tube aging. The temperature- dependent signal amplitude variations due to the intrinsic temperature coefficients of the PM tube gain and BGO scintillation efficiency have been characterized and real-time gain corrections introduced. The detector and electronics design, measured intrinsic performance of the detectors and electronics, and the performance of the detector and electronics within the fissile mass flow monitoring system are described

Electronic Commerce user manual

Energy Technology Data Exchange (ETDEWEB)

1992-04-10

This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

Electronic Commerce user manual

Energy Technology Data Exchange (ETDEWEB)

1992-04-10

This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

An elementary quantum network using robust nuclear spin qubits in diamond

Science.gov (United States)

Kalb, Norbert; Reiserer, Andreas; Humphreys, Peter; Blok, Machiel; van Bemmelen, Koen; Twitchen, Daniel; Markham, Matthew; Taminiau, Tim; Hanson, Ronald

Quantum registers containing multiple robust qubits can form the nodes of future quantum networks for computation and communication. Information storage within such nodes must be resilient to any type of local operation. Here we demonstrate multiple robust memories by employing five nuclear spins adjacent to a nitrogen-vacancy defect centre in diamond. We characterize the storage of quantum superpositions and their resilience to entangling attempts with the electron spin of the defect centre. The storage fidelity is found to be limited by the probabilistic electron spin reset after failed entangling attempts. Control over multiple memories is then utilized to encode states in decoherence protected subspaces with increased robustness. Furthermore we demonstrate memory control in two optically linked network nodes and characterize the storage capabilities of both memories in terms of the process fidelity with the identity. These results pave the way towards multi-qubit quantum algorithms in a remote network setting.

Searching LOGIN, the Local Government Information Network.

Science.gov (United States)

Jack, Robert F.

1984-01-01

Describes a computer-based information retrieval and electronic messaging system produced by Control Data Corporation now being used by government agencies and other organizations. Background of Local Government Information Network (LOGIN), database structure, types of LOGIN units, searching LOGIN (intersect, display, and list commands), and how…

Communication network for telemedicine | Debretsion | Zede Journal

African Journals Online (AJOL)

Telemedicine is the most promising one for improving the access to specialized health services to all remote, rural areas in all developing countries. Exploiting the technological advancements in the field of electronics, signal processing and software a communication network for telemedicine is proposedfor the existing ...

Second-order design problem in the Ancona geodetic network

International Nuclear Information System (INIS)

Baldi, P.; Ferrari, G.; Postpischl, D.; Unguendoli, M.

1980-01-01

In this note an examination is made of the control network installed in the Ancona area in 1975 for seismotectonic studies. From an analysis of the network there arises the possibility of achieving a considerable improvement in the results by considering a plan of work derived from the a priori analysis of the covariance matrix and improving the atmospheric data fo the correction of electronic distance measurements, by the use of meteorological balloons. (author)

Classification of E-Nose Aroma Data of Four Fruit Types by ABC-Based Neural Network

Directory of Open Access Journals (Sweden)

M. Fatih Adak

2016-02-01

Full Text Available Electronic nose technology is used in many areas, and frequently in the beverage industry for classification and quality-control purposes. In this study, four different aroma data (strawberry, lemon, cherry, and melon were obtained using a MOSES II electronic nose for the purpose of fruit classification. To improve the performance of the classification, the training phase of the neural network with two hidden layers was optimized using artificial bee colony algorithm (ABC, which is known to be successful in exploration. Test data were given to two different neural networks, each of which were trained separately with backpropagation (BP and ABC, and average test performances were measured as 60% for the artificial neural network trained with BP and 76.39% for the artificial neural network trained with ABC. Training and test phases were repeated 30 times to obtain these average performance measurements. This level of performance shows that the artificial neural network trained with ABC is successful in classifying aroma data.

Classification of E-Nose Aroma Data of Four Fruit Types by ABC-Based Neural Network.

Science.gov (United States)

Adak, M Fatih; Yumusak, Nejat

2016-02-27

Electronic nose technology is used in many areas, and frequently in the beverage industry for classification and quality-control purposes. In this study, four different aroma data (strawberry, lemon, cherry, and melon) were obtained using a MOSES II electronic nose for the purpose of fruit classification. To improve the performance of the classification, the training phase of the neural network with two hidden layers was optimized using artificial bee colony algorithm (ABC), which is known to be successful in exploration. Test data were given to two different neural networks, each of which were trained separately with backpropagation (BP) and ABC, and average test performances were measured as 60% for the artificial neural network trained with BP and 76.39% for the artificial neural network trained with ABC. Training and test phases were repeated 30 times to obtain these average performance measurements. This level of performance shows that the artificial neural network trained with ABC is successful in classifying aroma data.

ELECTRONIC COMMERCE: TANTANGAN KOMPETENSI AKUNTAN DALAM MENGHADAPI ISU INTERNAL KONTROL

Directory of Open Access Journals (Sweden)

Setyarini Santosa

2002-01-01

Full Text Available The emerging of the internet and world wide web as enabler of electronic commerce has resulted in some complexities for accountants in conducting their engagement. In electronic commerce, which trading activities have been facilitated with computer network such as intranet, extranet or internet, internal control structure has become more complicated than those without network. Confidentiality, integrity, authenticity and non-repudiation are some of the major complex issues in the application of electronic commerce these days.Those complexities, which do not occur in non computer-based trading, are based on the fact that electronic commerce not only involves accounting disiplines but also technical comprehension from other diciplines. Accountants find difficulties in facing the internal control issues in computer-based information system environment, especially in a situation that business has already been implementing computer network in conducting its primary and support activities. This article will discuss material related to the current issues of internal control structure, the implication of electronic commerce on internal control structure and opportunities for accountants. Abstract in Bahasa Indonesia : Kemunculan internet dan world wide web sebagai dasar berkembangnya perdagangan elektronik atau electronic commerce telah menimbulkan permasalahan yang cukup pelik bagi seorang akuntan dalam menjalankan penugasannya. Dalam lingkungan perdagangan yang sudah memanfaatkan jaringan komputer, baik dalam kapasitasnya sebagai intranet, extranet, maupun internet, sistem pengendalian internal menjadi semakin rumit. Beberapa isu seperti keamanan dan keaslian transaksi yang dulunya nampak sederhana dalam lingkungan yang tidak berbasis komputer, sekarang menjadi sangat kompleks. Dalam electronic commerce, isu-isu tersebut dikenal dengan istilah confidentiality, integrity, authenticity, non-repudiation dan sebagainya. Kekompleksan ini dikarenakan hal

Complex network description of the ionosphere

Science.gov (United States)

Lu, Shikun; Zhang, Hao; Li, Xihai; Li, Yihong; Niu, Chao; Yang, Xiaoyun; Liu, Daizhi

2018-03-01

Complex networks have emerged as an essential approach of geoscience to generate novel insights into the nature of geophysical systems. To investigate the dynamic processes in the ionosphere, a directed complex network is constructed, based on a probabilistic graph of the vertical total electron content (VTEC) from 2012. The results of the power-law hypothesis test show that both the out-degree and in-degree distribution of the ionospheric network are not scale-free. Thus, the distribution of the interactions in the ionosphere is homogenous. None of the geospatial positions play an eminently important role in the propagation of the dynamic ionospheric processes. The spatial analysis of the ionospheric network shows that the interconnections principally exist between adjacent geographical locations, indicating that the propagation of the dynamic processes primarily depends on the geospatial distance in the ionosphere. Moreover, the joint distribution of the edge distances with respect to longitude and latitude directions shows that the dynamic processes travel further along the longitude than along the latitude in the ionosphere. The analysis of small-world-ness indicates that the ionospheric network possesses the small-world property, which can make the ionosphere stable and efficient in the propagation of dynamic processes.

Electrical and electronic principles

CERN Document Server

Knight, S A

1991-01-01

Electrical and Electronic Principles, 2, Second Edition covers the syllabus requirements of BTEC Unit U86/329, including the principles of control systems and elements of data transmission. The book first tackles series and parallel circuits, electrical networks, and capacitors and capacitance. Discussions focus on flux density, electric force, permittivity, Kirchhoff's laws, superposition theorem, arrangement of resistors, internal resistance, and powers in a circuit. The text then takes a look at capacitors in circuit, magnetism and magnetization, electromagnetic induction, and alternating v

Transmission Electron Microscopy of a CMSX-4 Ni-Base Superalloy Produced by Selective Electron Beam Melting

Directory of Open Access Journals (Sweden)

Alireza B. Parsa

2016-10-01

Full Text Available In this work, the microstructures of superalloy specimens produced using selective electron beam melting additive manufacturing were characterized. The materials were produced using a CMSX-4 powder. Two selective electron beam melting processing strategies, which result in higher and lower effective cooling rates, are described. Orientation imaging microscopy, scanning transmission electron microscopy and conventional high resolution transmission electron microscopy are used to investigate the microstructures. Our results suggest that selective electron beam melting processing results in near equilibrium microstructures, as far as γ′ volume fractions, the formation of small amounts of TCP phases and the partitioning behavior of the alloy elements are concerned. As expected, higher cooling rates result in smaller dendrite spacings, which are two orders of magnitude smaller than observed during conventional single crystal casting. During processing, columnar grains grow in <100> directions, which are rotated with respect to each other. There are coarse γ/γ′ microstructures in high angle boundary regions. Dislocation networks form low angle boundaries. A striking feature of the as processed selective electron beam melting specimens is their high dislocation density. From a fundamental point of view, this opens new possibilities for the investigation of elementary dislocation processes which accompany solidification.

Converting hard copy documents for electronic dissemination

Energy Technology Data Exchange (ETDEWEB)

Hoffman, F.

1994-12-31

Since the advent of computer systems, the goal of a paperless office, and even a paperless society, has been pursued. While the normal paper flow in an organization is far from totally automated, particularly for items requiring signatures or authorizations, electronic information dissemination is becoming an almost simple task. The reasons for providing on-line documents are many and include faster and easier access for everyone, elimination of printing costs, reduction of wasted shelf and desk space, and the security of having a centrally-located, always up-to-date document. New computer software even provides the user with the ability to annotate documents and to have bookmarks so that the old scribbled-in and dog-eared manual can be replaced without loosing this `customizability`. Moreover, new hypermedia capabilities mean that documents can be read in a non-linear fashion and can include color figures and photographs, audio, and even animation sequences, capabilities which exceed those of paper. The proliferation of network-based information servers, coupled with the growth of the Internet, has enticed academic, governmental, and even commercial organizations to provide increasing numbers of documents and data bases in electronic form via the network, not just to internal staff, but to the public as well. Much of this information, which includes everything from mundane company procedures to spiffy marketing brochures, was previously published only in hard copy. Converting existing documents to electronic form and producing only electronic versions of new documents poses some interesting challenges to the maintainer or author.

Electronic conferencing for continuing medical education: a resource survey.

Science.gov (United States)

Sternberg, R J

1986-10-01

The use of electronic technologies to link participants for education conferences is an option for providers of Continuing Medical Education. In order to profile the kinds of electronic networks currently offering audio- or videoteleconferences for physician audiences, a survey was done during late 1985. The information collected included range of services, fees, and geographic areas served. The results show a broad diversity of providers providing both interactive and didactic programming to both physicians and other health care professionals.

Electron identification capabilities of the CBM experiment at FAIR

Energy Technology Data Exchange (ETDEWEB)

Hoehne, Claudia; Kisel, Ivan [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Lebedev, Semen [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Laboratory of Information Technologies, Joint Institute for Nuclear Research, Dubna (Russian Federation); Ososkov, Gennady [Laboratory of Information Technologies, Joint Institute for Nuclear Research, Dubna (Russian Federation)

2010-07-01

The Compressed Baryonic Matter (CBM) experiment at the future FAIR facility at Darmstadt will measure dileptons emitted from the hot and dense phase in heavy-ion collisions. In case of an electron measurement, a high purity of identified electrons is required in order to suppress the background. Electron identification in CBM will be performed by a RICH and TRD detectors. In this contribution, methods which have been developed for the electron identification in CBM are presented. A fast and efficient RICH ring recognition algorithm based on the Hough Transform has been implemented. An ellipse fitting algorithm has been elaborated because most of the CBM RICH rings have elliptic shapes. An Artificial Neural Network can be used in order to suppress fake rings. The electron identification in RICH is substantially improved by the use of TRD detectors for which several different algorithms for electron identification are implemented. Results of electron identification and pion suppression are presented.

Working safely with electronics racks

CERN Document Server

Simon Baird, HSE Unit Head

2016-01-01

Think of CERN and you’ll probably think of particle accelerators and detectors. These are the tools of the trade in particle physics, but behind them are the racks of electronics that include power supplies, control systems and data acquisition networks.   Inside an electronics rack: danger could be lurking if the rack is not powered off. In routine operation, these are no more harmful than the home entertainment system in your living room. But unscrew the cover and it’s a different matter. Even after following appropriate training, and with formal authorisation from your group leader or equivalent to carry out electrical work or any work in the vicinity of electrical hazards, and even with extensive experience of carrying out such operations, it’s important to incorporate safe working practices into your routine. At CERN, before the racks of electronics reach their operational configurations for the accelerators and detectors, they play a vital role in test set-ups ...

African Transitional Justice Research Network | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

... little African-led research on the cultural appropriateness and impact of such models of transitional justice. This grant will facilitate the creation and sustainable expansion of an electronically-based research network on options and lessons learned pertaining to transitional justice. A second objective is to build the capacity ...

Efficient Minimax Design of Networks without Using Derivatives

DEFF Research Database (Denmark)

Madsen, Kaj; Nielsen, Niels Ole; Schjær-Jacobsen, Hans

1975-01-01

., which makes the gradient computation by the adjoint network method or related methods rather complicated, and often numerical errors are introduced in the gradients. Consequently, the algorithm is found to be of particular relevance in optimum design of practical microwave networks. The relative...... design results. Finally, optimum broad-band design of a practical coaxial transferred-electron reflection-type amplilier is carried out by means of the proposed method. The results are supported by experimental verification.......A new minimax network optimization algorithm not requiring derivatives has been developed. It is based on successive linear approximations to the nonlinear functions defining the problem. Adequate modeling of distributed parameter circuits for optimization purposes often involves parasitic, etc...

Bitterness intensity prediction of berberine hydrochloride using an electronic tongue and a GA-BP neural network.

Science.gov (United States)

Liu, Ruixin; Zhang, Xiaodong; Zhang, Lu; Gao, Xiaojie; Li, Huiling; Shi, Junhan; Li, Xuelin

2014-06-01

The aim of this study was to predict the bitterness intensity of a drug using an electronic tongue (e-tongue). The model drug of berberine hydrochloride was used to establish a bitterness prediction model (BPM), based on the taste evaluation of bitterness intensity by a taste panel, the data provided by the e-tongue and a genetic algorithm-back-propagation neural network (GA-BP) modeling method. The modeling characteristics of the GA-BP were compared with those of multiple linear regression, partial least square regression and BP methods. The determination coefficient of the BPM was 0.99965±0.00004, the root mean square error of cross-validation was 0.1398±0.0488 and the correlation coefficient of the cross-validation between the true and predicted values was 0.9959±0.0027. The model is superior to the other three models based on these indicators. In conclusion, the model established in this study has a high fitting degree and may be used for the bitterness prediction modeling of berberine hydrochloride of different concentrations. The model also provides a reference for the generation of BPMs of other drugs. Additionally, the algorithm of the study is able to conduct a rapid and accurate quantitative analysis of the data provided by the e-tongue.

Automatic Segmentation and Quantification of Filamentous Structures in Electron Tomography.

Science.gov (United States)

Loss, Leandro A; Bebis, George; Chang, Hang; Auer, Manfred; Sarkar, Purbasha; Parvin, Bahram

2012-10-01

Electron tomography is a promising technology for imaging ultrastructures at nanoscale resolutions. However, image and quantitative analyses are often hindered by high levels of noise, staining heterogeneity, and material damage either as a result of the electron beam or sample preparation. We have developed and built a framework that allows for automatic segmentation and quantification of filamentous objects in 3D electron tomography. Our approach consists of three steps: (i) local enhancement of filaments by Hessian filtering; (ii) detection and completion (e.g., gap filling) of filamentous structures through tensor voting; and (iii) delineation of the filamentous networks. Our approach allows for quantification of filamentous networks in terms of their compositional and morphological features. We first validate our approach using a set of specifically designed synthetic data. We then apply our segmentation framework to tomograms of plant cell walls that have undergone different chemical treatments for polysaccharide extraction. The subsequent compositional and morphological analyses of the plant cell walls reveal their organizational characteristics and the effects of the different chemical protocols on specific polysaccharides.

#Vapelife: An Exploratory Study of Electronic Cigarette Use and Promotion on Instagram.

Science.gov (United States)

Laestadius, Linnea I; Wahl, Megan M; Cho, Young I

2016-10-14

The growth of social networking services has enabled the sharing of electronic cigarette opinions and experiences via user-generated content. This exploratory study analyzed electronic cigarette content found on the visual social networking service, Instagram, in order to highlight public health challenges created by this content and support understanding of electronic cigarette promotion and usage. A qualitative content analysis was performed on Instagram posts made with the hashtags #ecig or #vape in October 2014. Images, text, and hashtags from 85 posts (43 #ecig, 42 #vape) were analyzed. In addition, the total number of posts made with eight key electronic cigarette hashtags was recorded at four points between March 2014 and October 2015. The total number of #vape posts on Instagram grew by 4,163,274 during the study period, while #ecig posts increased by 741,916. Of the posts examined in-depth, corporate users made up over half of posts. No posts were critical of electronic cigarettes. Few mentioned electronic cigarettes in the context of health benefits. No posts included major brands, and mod style electronic cigarettes were mentioned or depicted in over half of posts. A majority of posts included hashtags expressing vaping identity and community. In addition, users mentioned novel practices such as sub-ohming. Conclusions/Importance: Instagram users in our sample characterized electronic cigarettes primarily as novel devices rather than equivalents to cigarettes. Further, hashtag communities and identities appear to be forming around vaping. Future research should consider the public health implications of these hashtags, as well as novel electronic cigarette practices.

Design issues and applications of wireless sensor networks ...

African Journals Online (AJOL)

... using tiny wireless sensor motes known as “smart dusts”, which have been made possible by advances in micro-electromechanical systems (MEMS) technology, wireless communications and digital electronics. Design considerations for the hardware and the topology necessary to realize these networks were evaluated.

Modelling, Estimation and Control of Networked Complex Systems

CERN Document Server

Chiuso, Alessandro; Frasca, Mattia; Rizzo, Alessandro; Schenato, Luca; Zampieri, Sandro

2009-01-01

The paradigm of complexity is pervading both science and engineering, leading to the emergence of novel approaches oriented at the development of a systemic view of the phenomena under study; the definition of powerful tools for modelling, estimation, and control; and the cross-fertilization of different disciplines and approaches. This book is devoted to networked systems which are one of the most promising paradigms of complexity. It is demonstrated that complex, dynamical networks are powerful tools to model, estimate, and control many interesting phenomena, like agent coordination, synchronization, social and economics events, networks of critical infrastructures, resources allocation, information processing, or control over communication networks. Moreover, it is shown how the recent technological advances in wireless communication and decreasing in cost and size of electronic devices are promoting the appearance of large inexpensive interconnected systems, each with computational, sensing and mobile cap...

Smart city networks through the internet of things

CERN Document Server

Pardalos, Panos

2017-01-01

This book both analyzes and synthesizes new cutting-edge theories and methods for future design implementations in smart cities through interdisciplinary synergizing of architecture, technology, and the Internet of Things (IoT). Implementation of IoT enables the collection and data exchange of objects embedded with electronics, software, sensors, and network connectivity. Recently IoT practices have moved into uniquely identifiable objects that are able to transfer data directly into networks. This book features new technologically advanced ideas, highlighting properties of smart future city networks. Chapter contributors include theorists, computer scientists, mathematicians, and interdisciplinary planners, who currently work on identifying theories, essential elements, and practices where the IoT can impact the formation of smart cities and sustainability via optimization, network analyses, data mining, mathematical modeling and engineering. Moreover, this book includes research-based theories and real wo...

Designing heavy metal oxide glasses with threshold properties from network rigidity.

Science.gov (United States)

Chakraborty, Shibalik; Boolchand, P; Malki, M; Micoulaut, M

2014-01-07

Here, we show that a new class of glasses composed of heavy metal oxides involving transition metals (V2O5-TeO2) can surprisingly be designed from very basic tools using topology and rigidity of their underlying molecular networks. When investigated as a function of composition, such glasses display abrupt changes in network packing and enthalpy of relaxation at Tg, underscoring presence of flexible to rigid elastic phase transitions. We find that these elastic phases are fully consistent with polaronic nature of electronic conductivity at high V2O5 content. Such observations have new implications for designing electronic glasses which differ from the traditional amorphous electrolytes having only mobile ions as charge carriers.

Compact holographic optical neural network system for real-time pattern recognition

Science.gov (United States)

Lu, Taiwei; Mintzer, David T.; Kostrzewski, Andrew A.; Lin, Freddie S.

1996-08-01

One of the important characteristics of artificial neural networks is their capability for massive interconnection and parallel processing. Recently, specialized electronic neural network processors and VLSI neural chips have been introduced in the commercial market. The number of parallel channels they can handle is limited because of the limited parallel interconnections that can be implemented with 1D electronic wires. High-resolution pattern recognition problems can require a large number of neurons for parallel processing of an image. This paper describes a holographic optical neural network (HONN) that is based on high- resolution volume holographic materials and is capable of performing massive 3D parallel interconnection of tens of thousands of neurons. A HONN with more than 16,000 neurons packaged in an attache case has been developed. Rotation- shift-scale-invariant pattern recognition operations have been demonstrated with this system. System parameters such as the signal-to-noise ratio, dynamic range, and processing speed are discussed.

Comprehensive evaluation of a digital imaging network

International Nuclear Information System (INIS)

Mun, S.K.; Benson, H.; Elliott, L.P.; Horii, S.

1988-01-01

The authors' institution has installed a comprehensive PACS network involving a dozen work stations and ten imaging systems with electronic archiving and teleradiology capability based on the CommView (AT and T) system and its fiberoptic network. Diagnostic reporting stations are placed in neuroradiology, abdominal imaging, general radiology, and ultrasound service. Other review stations are located in intensive care units, radiation medicine, the emergency room, and other sites. Clinical acceptance of such technology varies depending on a number of factors: image quality, image data volume, service style, and personal preference. The general acceptance depends on the work station performance, network response time, and work station environment. Clinical acceptance by radiologists and referring physicians was evaluated. The evaluation project included work-station performance, network performance, system interface, RIS interface, and development of training methods and implementation strategy for other sites. A cost analysis and a study of administrative impact are integral parts of the comprehensive evaluation project

Novel approach to utilizing electronic health records for dermatologic research: developing a multi-institutional federated data network for clinical and translational research in psoriasis and psoriatic arthritis.

Science.gov (United States)

Armstrong, April W; Reddy, Shalini B; Garg, Amit

2012-05-15

The implementation of Electronic Health Records (EHR) in the United States has created new opportunities for research using automated data extraction methods. A large amount of information from the EHR can be utilized for clinical and translational research. To date, a number of institutions have the capability of extracting clinical data from EHR to create local repositories of de-identified data amenable to research queries through the Informatics for Integrated Biology and the Bedside (i2b2) platform. Collaborations among institutions sharing a common i2b2 platform hold exciting opportunities for research in psoriasis and psoriatic arthritis. With the automated extraction of patient-level data from multiple institutions, this novel informatics network has the ability to address high-priority research questions. With commitment to high-quality data through applied algorithms for cohort identification and validation of outcomes, the creation of Psoriasis and Psoriatic Arthritis Integrated Research Data Network (PIONEER) will make a significant contribution to psoriasis and psoriatic arthritis research.

Satellite network robust QoS-aware routing

CERN Document Server

Long, Fei

2014-01-01

Satellite Network Robust QoS-aware Routing presents a novel routing strategy for satellite networks. This strategy is useful for the design of multi-layered satellite networks as it can greatly reduce the number of time slots in one system cycle. The traffic prediction and engineering approaches make the system robust so that the traffic spikes can be handled effectively. The multi-QoS optimization routing algorithm can satisfy various potential user requirements. Clear and sufficient illustrations are also presented in the book. As the chapters cover the above topics independently, readers from different research backgrounds in constellation design, multi-QoS routing, and traffic engineering can benefit from the book.   Fei Long is a senior engineer at Beijing R&D Center of 54th Research Institute of China Electronics Technology Group Corporation.

A deep convolutional neural network approach to single-particle recognition in cryo-electron microscopy.

Science.gov (United States)

Zhu, Yanan; Ouyang, Qi; Mao, Youdong

2017-07-21

Single-particle cryo-electron microscopy (cryo-EM) has become a mainstream tool for the structural determination of biological macromolecular complexes. However, high-resolution cryo-EM reconstruction often requires hundreds of thousands of single-particle images. Particle extraction from experimental micrographs thus can be laborious and presents a major practical bottleneck in cryo-EM structural determination. Existing computational methods for particle picking often use low-resolution templates for particle matching, making them susceptible to reference-dependent bias. It is critical to develop a highly efficient template-free method for the automatic recognition of particle images from cryo-EM micrographs. We developed a deep learning-based algorithmic framework, DeepEM, for single-particle recognition from noisy cryo-EM micrographs, enabling automated particle picking, selection and verification in an integrated fashion. The kernel of DeepEM is built upon a convolutional neural network (CNN) composed of eight layers, which can be recursively trained to be highly "knowledgeable". Our approach exhibits an improved performance and accuracy when tested on the standard KLH dataset. Application of DeepEM to several challenging experimental cryo-EM datasets demonstrated its ability to avoid the selection of un-wanted particles and non-particles even when true particles contain fewer features. The DeepEM methodology, derived from a deep CNN, allows automated particle extraction from raw cryo-EM micrographs in the absence of a template. It demonstrates an improved performance, objectivity and accuracy. Application of this novel method is expected to free the labor involved in single-particle verification, significantly improving the efficiency of cryo-EM data processing.

Private Electronic Money, Fiat Money and the Payments System

OpenAIRE

Andrew B. Whinston; Paula Hernandez-Verme; Haibo Huang

2004-01-01

Temzelides and Williamson (2001) provides valuable contribution into the private money literature, however, as pointed out by Schreft (2001), while the model provides insight about historical experiences with private paper monies, it does not provide a clear insight on how a modern system of private electronic money would work and how the necessary network shall function. Our target of this paper is to fill in that gap. We present a model with two types of private electronic currencies with o...

Assembly and offset assignment scheme for self-similar traffic in optical burst switched networks

CSIR Research Space (South Africa)

Muwonge, KB

2007-10-01

Full Text Available at the Label Edge Router (LER) to buffer traffic in the electronic domain. Burst assembly and offset assignment schemes are implemented in a complementary manner to improve QoS of an OBS network. The authors show that OBS network performance is directly related...

Roles of epsilon-near-zero (ENZ) and mu-near-zero (MNZ) materials in optical metatronic circuit networks.

Science.gov (United States)

Abbasi, Fereshteh; Engheta, Nader

2014-10-20

The concept of metamaterial-inspired nanocircuits, dubbed metatronics, was introduced in [Science 317, 1698 (2007); Phys. Rev. Lett. 95, 095504 (2005)]. It was suggested how optical lumped elements (nanoelements) can be made using subwavelength plasmonic or non-plasmonic particles. As a result, the optical metatronic equivalents of a number of electronic circuits, such as frequency mixers and filters, were suggested. In this work we further expand the concept of electronic lumped element networks into optical metatronic circuits and suggest a conceptual model applicable to various metatronic passive networks. In particular, we differentiate between the series and parallel networks using epsilon-near-zero (ENZ) and mu-near-zero (MNZ) materials. We employ layered structures with subwavelength thicknesses for the nanoelements as the building blocks of collections of metatronic networks. Furthermore, we explore how by choosing the non-zero constitutive parameters of the materials with specific dispersions, either Drude or Lorentzian dispersion with suitable parameters, capacitive and inductive responses can be achieved in both series and parallel networks. Next, we proceed with the one-to-one analogy between electronic circuits and optical metatronic filter layered networks and justify our analogies by comparing the frequency response of the two paradigms. Finally, we examine the material dispersion of near-zero relative permittivity as well as other physically important material considerations such as losses.

Copercolating Networks: An Approach for Realizing High-Performance Transparent Conductors using Multicomponent Nanostructured Networks

Directory of Open Access Journals (Sweden)

Das Suprem R.

2016-06-01

Full Text Available Although transparent conductive oxides such as indium tin oxide (ITO are widely employed as transparent conducting electrodes (TCEs for applications such as touch screens and displays, new nanostructured TCEs are of interest for future applications, including emerging transparent and flexible electronics. A number of twodimensional networks of nanostructured elements have been reported, including metallic nanowire networks consisting of silver nanowires, metallic carbon nanotubes (m-CNTs, copper nanowires or gold nanowires, and metallic mesh structures. In these single-component systems, it has generally been difficult to achieve sheet resistances that are comparable to ITO at a given broadband optical transparency. A relatively new third category of TCEs consisting of networks of 1D-1D and 1D-2D nanocomposites (such as silver nanowires and CNTs, silver nanowires and polycrystalline graphene, silver nanowires and reduced graphene oxide have demonstrated TCE performance comparable to, or better than, ITO. In such hybrid networks, copercolation between the two components can lead to relatively low sheet resistances at nanowire densities corresponding to high optical transmittance. This review provides an overview of reported hybrid networks, including a comparison of the performance regimes achievable with those of ITO and single-component nanostructured networks. The performance is compared to that expected from bulk thin films and analyzed in terms of the copercolation model. In addition, performance characteristics relevant for flexible and transparent applications are discussed. The new TCEs are promising, but significant work must be done to ensure earth abundance, stability, and reliability so that they can eventually replace traditional ITO-based transparent conductors.

EVOLUTION OF PROGENITORS FOR ELECTRON CAPTURE SUPERNOVAE

International Nuclear Information System (INIS)

Takahashi, Koh; Umeda, Hideyuki; Yoshida, Takashi

2013-01-01

We provide progenitor models for electron capture supernovae (ECSNe) with detailed evolutionary calculation. We include minor electron capture nuclei using a large nuclear reaction network with updated reaction rates. For electron capture, the Coulomb correction of rates is treated and the contribution from neutron-rich isotopes is taken into account in each nuclear statistical equilibrium (NSE) composition. We calculate the evolution of the most massive super asymptotic giant branch stars and show that these stars undergo off-center carbon burning and form ONe cores at the center. These cores become heavier up to the critical mass of 1.367 M ☉ and keep contracting even after the initiation of O+Ne deflagration. Inclusion of minor electron capture nuclei causes convective URCA cooling during the contraction phase, but the effect on the progenitor evolution is small. On the other hand, electron capture by neutron-rich isotopes in the NSE region has a more significant effect. We discuss the uniqueness of the critical core mass for ECSNe and the effect of wind mass loss on the plausibility of our models for ECSN progenitors.

Three-dimensional graphene networks: synthesis,properties and applications

Institute of Scientific and Technical Information of China (English)

Yanfeng Ma; Yongsheng Chen

2015-01-01

Recently, three-dimensional graphene/graphene oxide(GO) networks(3DGNs) in the form of foams,sponges and aerogels have atracted much atention. 3D structures provide graphene materials with high speciic surface areas, large pore volumes, strong mechanical strengths and fast mass and electron transport,owing to the combination of the 3D porous structures and the excellent intrinsic properties of graphene.his review focuses on the latest advances in the preparation, properties and potential applications of 3D micro-/nano-architectures made of graphene/GO-based networks, with emphasis on graphene foams and sponges.

Networking of safeguards systems

International Nuclear Information System (INIS)

Chare, P.; Dutrannois, A.; Kloeckner, W.; Swinhoe, M.

1995-01-01

This paper discusses the design of a safeguards system that can be incorporated into a plant during the final phase of its construction to permit the acquisition and transmission of data during plant operation in the absence of an inspector. The system is an example of a networked data system of weighing, identity, and NDA information. It collects all of its non-surveillance data produced by safeguards equipment in a fuel fabrication plant. The data collection and transfer tasks are carried out by two software packages: NEGUS, a redundant data acquisition system designed to record neutron coincidence data, high-resolution gamma spectra, and sensor data for the NDA information and associated barcode identity information, and BRANCH, which deals with weighing and associated identity information. These processes collect data from local electronics using an ethernet network and provide information to the main review program

Electronic Publishing and Document Delivery; A Case Study of Commercial Information Services on the Internet.

Science.gov (United States)

Abbott, Anthony

1992-01-01

Discusses the electronic publishing activities of Meckler Publishing on the Internet, including a publications catalog, an electronic journal, and tables of contents databases. Broader issues of commercial network publishing are also addressed, including changes in the research process, changes in publishing, bibliographic control,…

Elements of learning technologies designing of engineering networks heat

Directory of Open Access Journals (Sweden)

Sidorkina Irina G.

2016-01-01

Full Text Available Modern educational systems function as a medium fast analysis of shared information that defines them as analytical. The purpose of analytical information processing systems: working with distributed data on a global computer networks, mining and processing of semi structured information, knowledge. Existing mathematical and heuristic methods for the automated synthesis of electronic courses and their corresponding algorithms do not allow the full compliance of development realized in the form of adequate criteria for the totality of the properties distributed educational systems within acceptable time limits and characteristic. Therefore, the development of electronic educational applications must be accompanied by a variety of software support intelligent and adaptive functions. In addition, there is no theoretical justification for integrative aspects and their practical applications for intelligent and adaptive systems of designing distance learning courses. Currently, this type of problem may be considered as a potentially promising. The article presents the functionality of the e-learning course on the design engineering of thermal networks, process modeling in engineering networks with the solution of energy efficiency, detection of problem areas; identify the irrational layout of heaters and others.

Green, one-step and template-free synthesis of silver spongelike networks via a solvothermal method

International Nuclear Information System (INIS)

Yi, Zao; Xu, Xibin; Zhang, Kuibao; Tan, Xiulan; Li, Xibo; Luo, Jiangshan; Ye, Xin; Wu, Weidong; Wu, Jie; Yi, Yougen; Tang, Yongjian

2013-01-01

Silver spongelike networks were synthesized from an alkaline pH solution of silver nitrate and glucose under solvothermal conditions. The products were characterized by X-ray powder diffraction, UV–visible spectroscopy, transmission electron microscopy, scanning electron microscopy and selected area electron diffraction. These Ag nanoparticles (NPs) appear to undergo sequentially linear aggregation and welding initially, and then, they randomly cross link into self-supporting, three-dimensional (3D) networks with time. The carboxylate groups, generated by glucose oxidation, interacted with the Ag nanostructures, resulting in formation of silver spongelike networks having very uniform wire diameters distributions (about 20 nm in diameter). A new plasmon band was observed in the longer-wavelengths region (565–912 nm) of the conventional transverse plasmon resonance band at 430 nm. In principle, this one-step, template-free approach can also be extended to large-scale 3D organizations of other transition/noble metal NPs. - Graphical abstract: Silver spongelike networks were synthesized from an alkaline pH solution of silver nitrate and glucose under solvothermal conditions, with any other reducing or capping agent. These Ag nanoparticles appear to undergo sequentially linear aggregation and welding initially, and then, they randomly cross link into self-supporting, three-dimensional spongelike networks with time. Highlights: ► Silver spongelike networks were synthesized using eco-friendly glucose. ► This synthesis was a seedless process, and did not need any other surfactant or capping agent. ► The process was initial reduction – nucleation – adsorption – growth – branching

AC surface photovoltage of indium phosphide nanowire networks

Energy Technology Data Exchange (ETDEWEB)

Lohn, Andrew J.; Kobayashi, Nobuhiko P. [California Univ., Santa Cruz, CA (United States). Baskin School of Engineering; California Univ., Santa Cruz, CA (US). Nanostructured Energy Conversion Technology and Research (NECTAR); NASA Ames Research Center, Moffett Field, CA (United States). Advanced Studies Laboratories

2012-06-15

Surface photovoltage is used to study the dynamics of photogenerated carriers which are transported through a highly interconnected three-dimensional network of indium phosphide nanowires. Through the nanowire network charge transport is possible over distances far in excess of the nanowire lengths. Surface photovoltage was measured within a region 10.5-14.5 mm from the focus of the illumination, which was chopped at a range of frequencies from 15 Hz to 30 kHz. Carrier dynamics were modeled by approximating the nanowire network as a thin film, then fitted to experiment suggesting diffusion of electrons and holes at approximately 75% of the bulk value in InP but with significantly reduced built-in fields, presumably due to screening by nanowire surfaces. (orig.)

Rwanda Health and Education Information Network (OASIS-RHEIN ...

International Development Research Centre (IDRC) Digital Library (Canada)

Rwanda Health and Education Information Network (OASIS-RHEIN). Partners in Health (PIH), an international nongovernmental organization, has demonstrated the effectiveness of its open source electronic medical record system (OpenMRS) in eight clinics in Rwanda. As a result, the Ministry of Health has decided to roll ...

Does Sentiment Among Users in Online Social Networks Polarize or Balance Out?

DEFF Research Database (Denmark)

Trier, Matthias; Hillmann, Robert

2017-01-01

Users express and share sentiments electronically when they communicate within online social network applications. One way to analyze such interdependent data is focusing on the inter-user relationships by applying a sociological perspective based on social network analysis. Existing studies exam...... examined the existence or distribution of sentiments in online communication at a general level or in small observed groups....

Experimental realization of synchronization in complex networks with Chua's circuits like nodes

International Nuclear Information System (INIS)

Posadas-Castillo, C.; Cruz-Hernandez, C.; Lopez-Gutierrez, R.M.

2009-01-01

In this paper, an experimental study on practical realization of synchronization in globally coupled networks with Chua's circuits like nodes is presented. Synchronization of coupled multiple Chua's circuits is achieved by appealing to results from complex systems theory. In particular, we design and implement electronically complex dynamical networks composed by three coupled Chua's circuits, considering two scenarios: (i) without master node, and (ii) with (periodic and chaotic) master node. The interactions in the networks are defined by coupling the first state of each Chua's circuit.

Designing communication and remote controlling of virtual instrument network system

Science.gov (United States)

Lei, Lin; Wang, Houjun; Zhou, Xue; Zhou, Wenjian

2005-01-01

In this paper, a virtual instrument network through the LAN and finally remote control of virtual instruments is realized based on virtual instrument and LabWindows/CVI software platform. The virtual instrument network system is made up of three subsystems. There are server subsystem, telnet client subsystem and local instrument control subsystem. This paper introduced virtual instrument network structure in detail based on LabWindows. Application procedure design of virtual instrument network communication, the Client/the programming mode of the server, remote PC and server communication far realizing, the control power of the workstation is transmitted, server program and so on essential technical were introduced. And virtual instruments network may connect to entire Internet on. Above-mentioned technology, through measuring the application in the electronic measurement virtual instrument network that is already built up, has verified the actual using value of the technology. Experiment and application validate that this design is resultful.

Designing communication and remote controlling of virtual instrument network system

International Nuclear Information System (INIS)

Lei Lin; Wang Houjun; Zhou Xue; Zhou Wenjian

2005-01-01

In this paper, a virtual instrument network through the LAN and finally remote control of virtual instruments is realized based on virtual instrument and LabWindows/CVI software platform. The virtual instrument network system is made up of three subsystems. There are server subsystem, telnet client subsystem and local instrument control subsystem. This paper introduced virtual instrument network structure in detail based on LabWindows. Application procedure design of virtual instrument network communication, the Client/the programming mode of the server, remote PC and server communication far realizing, the control power of the workstation is transmitted, server program and so on essential technical were introduced. And virtual instruments network may connect to entire Internet on. Above-mentioned technology, through measuring the application in the electronic measurement virtual instrument network that is already built up, has verified the actual using value of the technology. Experiment and application validate that this design is resultful

Equalized Energy Consumption in Wireless Body Area Networks for a Prolonged Network Lifetime

Directory of Open Access Journals (Sweden)

Maryam El Azhari

2017-01-01

Full Text Available The phenomenal advances in electronics contributed to a widespread use of distributed sensors in wireless communications. A set of biosensors can be deployed or implanted in the human body to form a Wireless Body Area Network (WBAN, where various WBAN PHY layers are utilized. The WBAN allows the measurement of physiological data, which is forwarded by the gateway to the base station for analysis purposes. The main issue in conceiving a WBAN communication mechanism is to manage the residual energy of sensors. The mobile agent system has been widely applied for surveillance applications in Wireless Sensor Networks (WSNs. It consists in dispatching one or more mobile agents simultaneously to collect data, while following a predetermined optimum itinerary. The continuous use of the optimal itinerary leads to a rapid depletion of sensor nodes batteries, which minimizes the network lifetime. This paper presents a new algorithm to equalize the energy consumption among sensor motes. The algorithm exploits all the available paths towards the destination and classifies them with respect to the end-to-end delay and the overall energy consumption. The proposed algorithm performs better compared to the optimal routing path. It increases the network lifetime to the maximum by postponing routing of data via the most-recently used path, and it also maintains data delivery within the delay interval threshold.

Influence of Personal Preferences on Link Dynamics in Social Networks

Directory of Open Access Journals (Sweden)

Ashwin Bahulkar

2017-01-01

Full Text Available We study a unique network dataset including periodic surveys and electronic logs of dyadic contacts via smartphones. The participants were a sample of freshmen entering university in the Fall 2011. Their opinions on a variety of political and social issues and lists of activities on campus were regularly recorded at the beginning and end of each semester for the first three years of study. We identify a behavioral network defined by call and text data, and a cognitive network based on friendship nominations in ego-network surveys. Both networks are limited to study participants. Since a wide range of attributes on each node were collected in self-reports, we refer to these networks as attribute-rich networks. We study whether student preferences for certain attributes of friends can predict formation and dissolution of edges in both networks. We introduce a method for computing student preferences for different attributes which we use to predict link formation and dissolution. We then rank these attributes according to their importance for making predictions. We find that personal preferences, in particular political views, and preferences for common activities help predict link formation and dissolution in both the behavioral and cognitive networks.

Software-Enabled Distributed Network Governance: The PopMedNet Experience.

Science.gov (United States)

Davies, Melanie; Erickson, Kyle; Wyner, Zachary; Malenfant, Jessica; Rosen, Rob; Brown, Jeffrey

2016-01-01

The expanded availability of electronic health information has led to increased interest in distributed health data research networks. The distributed research network model leaves data with and under the control of the data holder. Data holders, network coordinating centers, and researchers have distinct needs and challenges within this model. The concerns of network stakeholders are addressed in the design and governance models of the PopMedNet software platform. PopMedNet features include distributed querying, customizable workflows, and auditing and search capabilities. Its flexible role-based access control system enables the enforcement of varying governance policies. Four case studies describe how PopMedNet is used to enforce network governance models. Trust is an essential component of a distributed research network and must be built before data partners may be willing to participate further. The complexity of the PopMedNet system must be managed as networks grow and new data, analytic methods, and querying approaches are developed. The PopMedNet software platform supports a variety of network structures, governance models, and research activities through customizable features designed to meet the needs of network stakeholders.

Large scale silver nanowires network fabricated by MeV hydrogen (H+) ion beam irradiation

International Nuclear Information System (INIS)

S, Honey; S, Naseem; A, Ishaq; M, Maaza; M T, Bhatti; D, Wan

2016-01-01

A random two-dimensional large scale nano-network of silver nanowires (Ag-NWs) is fabricated by MeV hydrogen (H + ) ion beam irradiation. Ag-NWs are irradiated under H +  ion beam at different ion fluences at room temperature. The Ag-NW network is fabricated by H + ion beam-induced welding of Ag-NWs at intersecting positions. H +  ion beam induced welding is confirmed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Moreover, the structure of Ag NWs remains stable under H +  ion beam, and networks are optically transparent. Morphology also remains stable under H +  ion beam irradiation. No slicings or cuttings of Ag-NWs are observed under MeV H +  ion beam irradiation. The results exhibit that the formation of Ag-NW network proceeds through three steps: ion beam induced thermal spikes lead to the local heating of Ag-NWs, the formation of simple junctions on small scale, and the formation of a large scale network. This observation is useful for using Ag-NWs based devices in upper space where protons are abandoned in an energy range from MeV to GeV. This high-quality Ag-NW network can also be used as a transparent electrode for optoelectronics devices. (paper)

Management of ageing and obsolescence of electronic equipments used by EDF

International Nuclear Information System (INIS)

Grellier, J.M.; Oddi, M.; Simon, G.

2006-01-01

The life time of control system is today a great stake for industries which need a high reliability level during a much longer period of time than the usual life time of electronic equipments. Electronic technologies are mainly drawn by performance and miniaturization objectives letting apart the risk of ageing, indeed. Industrial users has therefore to cope with two main phenomena: the commercial obsolescence of electronic cards and the physical ageing of components. In the recent past years, Electricite De France has developed a deep knowledge of these phenomena and has elaborated a method to reduce the associated financial and technical risks. This method is used, partially or totally, in different EDF projects: the assessment of the ageing level of the control systems in EDF nuclear power plants, the elaboration of preventive maintenance actions to enhance the life time of protection relays in the French very high voltage electrical network, and the construction of a renovation plan for the control systems of the medium voltage electrical network in France. (authors)

Paired-pulse facilitation achieved in protonic/electronic hybrid indium gallium zinc oxide synaptic transistors

Energy Technology Data Exchange (ETDEWEB)

Guo, Li Qiang, E-mail: guoliqiang@ujs.edu.cn; Ding, Jian Ning; Huang, Yu Kai [Micro/Nano Science & Technology Center, Jiangsu University, Zhenjiang, 212013 (China); Zhu, Li Qiang, E-mail: lqzhu@nimte.ac.cn [Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

2015-08-15

Neuromorphic devices with paired pulse facilitation emulating that of biological synapses are the key to develop artificial neural networks. Here, phosphorus-doped nanogranular SiO{sub 2} electrolyte is used as gate dielectric for protonic/electronic hybrid indium gallium zinc oxide (IGZO) synaptic transistor. In such synaptic transistors, protons within the SiO{sub 2} electrolyte are deemed as neurotransmitters of biological synapses. Paired-pulse facilitation (PPF) behaviors for the analogous information were mimicked. The temperature dependent PPF behaviors were also investigated systematically. The results indicate that the protonic/electronic hybrid IGZO synaptic transistors would be promising candidates for inorganic synapses in artificial neural network applications.

Paired-pulse facilitation achieved in protonic/electronic hybrid indium gallium zinc oxide synaptic transistors

Directory of Open Access Journals (Sweden)

Li Qiang Guo

2015-08-01

Full Text Available Neuromorphic devices with paired pulse facilitation emulating that of biological synapses are the key to develop artificial neural networks. Here, phosphorus-doped nanogranular SiO2 electrolyte is used as gate dielectric for protonic/electronic hybrid indium gallium zinc oxide (IGZO synaptic transistor. In such synaptic transistors, protons within the SiO2 electrolyte are deemed as neurotransmitters of biological synapses. Paired-pulse facilitation (PPF behaviors for the analogous information were mimicked. The temperature dependent PPF behaviors were also investigated systematically. The results indicate that the protonic/electronic hybrid IGZO synaptic transistors would be promising candidates for inorganic synapses in artificial neural network applications.

Identifying the molecular functions of electron transport proteins using radial basis function networks and biochemical properties.

Science.gov (United States)

Le, Nguyen-Quoc-Khanh; Nguyen, Trinh-Trung-Duong; Ou, Yu-Yen

2017-05-01

The electron transport proteins have an important role in storing and transferring electrons in cellular respiration, which is the most proficient process through which cells gather energy from consumed food. According to the molecular functions, the electron transport chain components could be formed with five complexes with several different electron carriers and functions. Therefore, identifying the molecular functions in the electron transport chain is vital for helping biologists understand the electron transport chain process and energy production in cells. This work includes two phases for discriminating electron transport proteins from transport proteins and classifying categories of five complexes in electron transport proteins. In the first phase, the performances from PSSM with AAIndex feature set were successful in identifying electron transport proteins in transport proteins with achieved sensitivity of 73.2%, specificity of 94.1%, and accuracy of 91.3%, with MCC of 0.64 for independent data set. With the second phase, our method can approach a precise model for identifying of five complexes with different molecular functions in electron transport proteins. The PSSM with AAIndex properties in five complexes achieved MCC of 0.51, 0.47, 0.42, 0.74, and 1.00 for independent data set, respectively. We suggest that our study could be a power model for determining new proteins that belongs into which molecular function of electron transport proteins. Copyright © 2017 Elsevier Inc. All rights reserved.

Carbon footprint of electronic devices

Science.gov (United States)

Sloma, Marcin

2013-07-01

Paper assesses the greenhouse gas emissions related to the electronic sectors including information and communication technology and media sectors. While media often presents the carbon emission problem of other industries like petroleum industry, the airlines and automobile sectors, plastics and steel manufacturers, the electronics industry must include the increasing carbon footprints caused from their applications like media and entertainment, computers and cooling devices, complex telecommunications networks, cloud computing and powerful mobile phones. In that sense greenhouse gas emission of electronics should be studied in a life cycle perspective, including regular operational electricity use. Paper presents which product groups or processes are major contributors in emission. From available data and extrapolation of existing information we know that the information and communication technology sector produced 1.3% and media sector 1.7% of global gas emissions within production cycle, using the data from 2007.In the same time global electricity use of that sectors was 3.9% and 3.2% respectively. The results indicate that for both sectors operation leads to more gas emissions than manufacture, although impacts from the manufacture is significant, especially in the supply chain. Media electronics led to more emissions than PCs (manufacture and operation). Examining the role of electronics in climate change, including disposal of its waste, will enable the industry to take internal actions, leading to lowering the impact on the climate change within the sector itself.

Architectures of electro-optical packet switched networks

DEFF Research Database (Denmark)

Berger, Michael Stubert

2004-01-01

and examines possible architectures for future high capacity networks with high capacity nodes. It is assumed that optics will play a key role in this scenario, and in this respect, the European IST research project DAVID aimed at proposing viable architectures for optical packet switching, exploiting the best...... from optics and electronics. An overview of the DAVID network architecture is given, focusing on the MAN and WAN architecture as well as the MPLS based network hierarchy. A statistical model of the optical slot generation process is presented and utilised to evaluate delay vs. efficiency. Furthermore...... architecture for a buffered crossbar switch is presented. The architecture uses two levels of backpressure (flow control) with different constraints on round trip time. No additional scheduling complexity is introduced, and for the actual example shown, a reduction in memory of 75% was obtained at the cost...

Recurrent Neural Network for Computing the Drazin Inverse.

Science.gov (United States)

Stanimirović, Predrag S; Zivković, Ivan S; Wei, Yimin

2015-11-01

This paper presents a recurrent neural network (RNN) for computing the Drazin inverse of a real matrix in real time. This recurrent neural network (RNN) is composed of n independent parts (subnetworks), where n is the order of the input matrix. These subnetworks can operate concurrently, so parallel and distributed processing can be achieved. In this way, the computational advantages over the existing sequential algorithms can be attained in real-time applications. The RNN defined in this paper is convenient for an implementation in an electronic circuit. The number of neurons in the neural network is the same as the number of elements in the output matrix, which represents the Drazin inverse. The difference between the proposed RNN and the existing ones for the Drazin inverse computation lies in their network architecture and dynamics. The conditions that ensure the stability of the defined RNN as well as its convergence toward the Drazin inverse are considered. In addition, illustrative examples and examples of application to the practical engineering problems are discussed to show the efficacy of the proposed neural network.

Identifying influential user communities on the social network

Science.gov (United States)

Hu, Weishu; Gong, Zhiguo; Hou U, Leong; Guo, Jingzhi

2015-10-01

Nowadays social network services have been popularly used in electronic commerce systems. Users on the social network can develop different relationships based on their common interests and activities. In order to promote the business, it is interesting to explore hidden relationships among users developed on the social network. Such knowledge can be used to locate target users for different advertisements and to provide effective product recommendations. In this paper, we define and study a novel community detection problem that is to discover the hidden community structure in large social networks based on their common interests. We observe that the users typically pay more attention to those users who share similar interests, which enable a way to partition the users into different communities according to their common interests. We propose two algorithms to detect influential communities using common interests in large social networks efficiently and effectively. We conduct our experimental evaluation using a data set from Epinions, which demonstrates that our method achieves 4-11.8% accuracy improvement over the state-of-the-art method.

Streaming-aware channel utilization improvement for wireless home networks

NARCIS (Netherlands)

Aslam, W.; Lukkien, J.J.

2012-01-01

A wireless network of consumer electronic (CE) devices in a modern home, is typically running streaming services with heterogeneous bandwidth demands. Satisfying these demands offers the challenge of mapping them efficiently onto scarce wireless channel bandwidth. This mapping is supported by the

Electron Bifurcation: Thermodynamics and Kinetics of Two-Electron Brokering in Biological Redox Chemistry.

Science.gov (United States)

Zhang, Peng; Yuly, Jonathon L; Lubner, Carolyn E; Mulder, David W; King, Paul W; Peters, John W; Beratan, David N

2017-09-19

processes of their own. We dissect the thermodynamics and kinetics of electron bifurcation in Nfn and find that the key features of electron bifurcation are (1) spatially separated transfer pathways that diverge from a two-electron donor, (2) one thermodynamically uphill and one downhill redox pathway, with a large negative shift in the donor's reduction potential after departure of the first electron, and (3) electron tunneling and activation factors that enable bifurcation, producing a 1:1 partitioning of electrons onto the two pathways. Electron bifurcation is found in the CO 2 reducing pathways of methanogenic archaea, in the hydrogen pathways of hydrogenases, in the nitrogen fixing pathway of Fix, and in the mitochondrial charge transfer chain of complex III, cytochrome bc 1 . While crossed potentials may offer the biological advantage of producing tightly regulated high energy reactive species, neither kinetic nor thermodynamic considerations mandate crossed potentials to generate successful electron bifurcation. Taken together, the theoretical framework established here, focusing on the underpinning electron tunneling barriers and activation free energies, explains the logic of electron bifurcation that enables energy conversion and conservation in Nfn, points toward bioinspired schemes to execute multielectron redox chemistry, and establishes a roadmap for examining novel electron bifurcation networks in nature.

Associative memory in an analog iterated-map neural network

Science.gov (United States)

Marcus, C. M.; Waugh, F. R.; Westervelt, R. M.

1990-03-01

The behavior of an analog neural network with parallel dynamics is studied analytically and numerically for two associative-memory learning algorithms, the Hebb rule and the pseudoinverse rule. Phase diagrams in the parameter space of analog gain β and storage ratio α are presented. For both learning rules, the networks have large ``recall'' phases in which retrieval states exist and convergence to a fixed point is guaranteed by a global stability criterion. We also demonstrate numerically that using a reduced analog gain increases the probability of recall starting from a random initial state. This phenomenon is comparable to thermal annealing used to escape local minima but has the advantage of being deterministic, and therefore easily implemented in electronic hardware. Similarities and differences between analog neural networks and networks with two-state neurons at finite temperature are also discussed.

Insights into the post-transcriptional regulation of the mitochondrial electron transport chain.

Science.gov (United States)

Sirey, Tamara M; Ponting, Chris P

2016-10-15

The regulation of the mitochondrial electron transport chain is central to the control of cellular homeostasis. There are significant gaps in our understanding of how the expression of the mitochondrial and nuclear genome-encoded components of the electron transport chain are co-ordinated, and how the assembly of the protein complexes that constitute the electron transport chain are regulated. Furthermore, the role post-transcriptional gene regulation may play in modulating these processes needs to be clarified. This review summarizes the current knowledge regarding the post-transcriptional gene regulation of the electron transport chain and highlights how noncoding RNAs may contribute significantly both to complex electron transport chain regulatory networks and to mitochondrial dysfunction. © 2016 The Author(s).

Selection of hadronic W-decays in DELPHI with feed forward neural networks - An update

CERN Document Server

Becks, K H; Müller, U; Wahlen, H

2003-01-01

Since 1998 feed forward neural networks have been successfully applied to select candidates of hadronic W-decays measured at different center of mass-energies by the DELPHI collaboration at the Large Electron Positron collider at CERN. To prepare the final publication, the neural network was adapted to all center of mass- energies. Detailed studies were performed concerning the level of preselection, the choice of network parameters and especially of the network architecture. The number of hidden nodes was optimized by testing different pruning methods. All studies and results will be discussed.

Selection of hadronic W-decays in DELPHI with feed forward neural networks - an update

International Nuclear Information System (INIS)

Becks, K.-H.; Drees, J.; Mueller, U.; Wahlen, H.

2003-01-01

Since 1998 feed forward neural networks have been successfully applied to select candidates of hadronic W-decays measured at different center of mass-energies by the DELPHI collaboration at the Large Electron Positron collider at CERN. To prepare the final publication, the neural network was adapted to all center of mass-energies. Detailed studies were performed concerning the level of preselection, the choice of network parameters and especially of the network architecture. The number of hidden nodes was optimized by testing different pruning methods. All studies and results will be discussed

Subsecond Tsunamis and Delays in Decentralized Electronic Systems

Directory of Open Access Journals (Sweden)

Pedro D. Manrique

2017-10-01

Full Text Available Driven by technological advances and economic gain, society’s electronic systems are becoming larger, faster, more decentralized and autonomous, and yet with increasing global reach. A prime example are the networks of financial markets which—in contrast to popular perception—are largely all-electronic and decentralized with no top-down real-time controller. This prototypical system generates complex subsecond dynamics that emerge from a decentralized network comprising heterogeneous hardware and software components, communications links, and a diverse ecology of trading algorithms that operate and compete within this all-electronics environment. Indeed, these same technological and economic drivers are likely to generate a similarly competitive all-electronic ecology in a variety of future cyberphysical domains such as e-commerce, defense and the transportation system, including the likely appearance of large numbers of autonomous vehicles on the streets of many cities. Hence there is an urgent need to deepen our understanding of stability, safety and security across a wide range of ultrafast, large, decentralized all-electronic systems—in short, society will eventually need to understand what extreme behaviors can occur, why, and what might be the impact of both intentional and unintentional system perturbations. Here we set out a framework for addressing this issue, using a generic model of heterogeneous, adaptive, autonomous components where each has a realistic limit on the amount of information and processing power available to it. We focus on the specific impact of delayed information, possibly through an accidental shift in the latency of information transmission, or an intentional attack from the outside. While much remains to be done in terms of developing formal mathematical results for this system, our preliminary results indicate the type of impact that can occur and the structure of a mathematical theory which may

Evolution of the social network of scientific collaborations

Science.gov (United States)

Barabási, A. L.; Jeong, H.; Néda, Z.; Ravasz, E.; Schubert, A.; Vicsek, T.

2002-08-01

The co-authorship network of scientists represents a prototype of complex evolving networks. In addition, it offers one of the most extensive database to date on social networks. By mapping the electronic database containing all relevant journals in mathematics and neuro-science for an 8-year period (1991-98), we infer the dynamic and the structural mechanisms that govern the evolution and topology of this complex system. Three complementary approaches allow us to obtain a detailed characterization. First, empirical measurements allow us to uncover the topological measures that characterize the network at a given moment, as well as the time evolution of these quantities. The results indicate that the network is scale-free, and that the network evolution is governed by preferential attachment, affecting both internal and external links. However, in contrast with most model predictions the average degree increases in time, and the node separation decreases. Second, we propose a simple model that captures the network's time evolution. In some limits the model can be solved analytically, predicting a two-regime scaling in agreement with the measurements. Third, numerical simulations are used to uncover the behavior of quantities that could not be predicted analytically. The combined numerical and analytical results underline the important role internal links play in determining the observed scaling behavior and network topology. The results and methodologies developed in the context of the co-authorship network could be useful for a systematic study of other complex evolving networks as well, such as the world wide web, Internet, or other social networks.

Comparison between electron-beam and chemical crosslinking of silicone rubber

Energy Technology Data Exchange (ETDEWEB)

Frounchi, Masoud [Polymer Engineering Group, Department of Chemical and Petroleum Engineering, Sharif University of Technology, Azadi Ave, Tehran (Iran, Islamic Republic of)]. E-mail: frounchi@sharif.edu; Dadbin, Susan [Yazd Processing Center, Atomic Energy Organization of Iran, Tehran (Iran, Islamic Republic of); Panahinia, Farhad [Polymer Engineering Group, Department of Chemical and Petroleum Engineering, Sharif University of Technology, Azadi Ave, Tehran (Iran, Islamic Republic of)

2006-02-15

Silicone rubber (SR) was irradiated by electron beam over a dose range of 50-300 kGy in the absence of chemical reagents. Molecular weight between crosslinks (M {sub c}) in the network of SB was determined by two methods of solvent swelling and modulus of elasticity. The network structure of the elastomer crosslinked by electron beam irradiation and chemical vulcanization was compared. Mechanical tests were performed to determine shore hardness, tensile elongation, strength and modulus of the samples. It was found that SR is effectively crosslinked by electron beam irradiation. The tensile strength, hardness, modulus and elongation of irradiated SR were higher than peroxide-crosslinked SR. The optimum dose for the neat rubber was 150 kGy which reduced to 50 kGy with addition of 10 wt.% fumed silica. The synergistic effect of fumed silica was verified by M {sub c} measurements which showed a dramatic decrease in presence of fumed silica in the rubber. The synergism in properties was also verified by comparing the modulus values calculated from the Guth-Smallwood equation and experimental data. Absence of chemical reagents in irradiated SR samples makes them a proper choice for medical applications.

Modifications of poly (vinilydene fluoride) under electronic excitations produced by charged particles (heavy ions and electrons)

International Nuclear Information System (INIS)

Fina, A.

1990-04-01

Some of the physico-chemical properties of organic solids like conductivity or permeation can be improved by irradiation. The aim of this work is to characterize modifications induced in poly (vinylidene fluoride) films (PVDF) by charged particles (ions and electrons), with electronic stopping power, for doses ranging from zero to twenty G-Grays. Influence of dose, density of electronic excitations, and flux (in particles per square centimeter), and the nature of defects induced by the beam, were studied with two methods: X-ray Photoelectron Spectroscopy (or XPS) for surface analysis, and electron Spin Resonance (or ESR) to probe the bulk of the film. Three ranges of doses are revealed in view of experimental results. At lower doses, PVDF undergoes deshydrofluorination induced by desorption; it is a low modifications regime. For intermediate range doses, conjugated carbon backbones of polyene compounds are produced. At higher doses, intermolecular interactions between the resulting fragments give a crosslinked network. For the upper limit of doses used, bond breaking results in a non reversible degradation of PVDF. In this last situation, direct atomic displacement of target atoms, is not negligible [fr

A Trusted Smart Phone and Its Applications in Electronic Payment

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

With the growing intelligence and popularity of mobile phones, and the trend of cellular network's convergence to IP based network, more and more mobile applications emerge on the market. For mission critical applications, like the electronic payment which will be discussed in this paper, the lack of trust in the underlying mobile infrastructure and secure interface to legacy systems (for this case, the banking systems) poses obstacles to their widespread presence in mobile services. Recently, the exposure of hacking of iPhone and other smart phones further emphasizes the criticality of establishing a trust platform for mobile applications. This paper analyzes the building blocks of the trusted smart phone, and proposes a framework to provide a trusted platform for mobile electronic payment. Such a proposed system may allow direct interface to the banking systems due to the banking industry recognized strong security, and hence, may enable its widespread use.

Increased electronic coupling in silicon nanocrystal networks doped with F4-TCNQ.

Science.gov (United States)

Carvalho, Alexandra; Oberg, Sven; Rayson, Mark J; Briddon, Patrick R

2013-02-01

The modification of the electronic structure of silicon nanocrystals using an organic dopant, 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), is investigated using first-principles calculations. It is shown that physisorbed F4-TCNQ molecules have the effect of oxidizing the nanocrystal, attracting the charge density towards the F4-TCNQ-nanocrystal interface, and decreasing the excitation energy of the system. In periodic F4-TCNQ/nanocrystal superlattices, F4-TCNQ is suggested to enhance exciton separation, and in the presence of free holes, to serve as a bridge for electron/hole transfer between adjacent nanocrystals.

Building sustainable multi-functional prospective electronic clinical data systems.

Science.gov (United States)

Randhawa, Gurvaneet S; Slutsky, Jean R

2012-07-01

A better alignment in the goals of the biomedical research enterprise and the health care delivery system can help fill the large gaps in our knowledge of the impact of clinical interventions on patient outcomes in the real world. There are several initiatives underway to align the research priorities of patients, providers, researchers, and policy makers. These include Agency for Healthcare Research and Quality (AHRQ)-supported projects to build flexible prospective clinical electronic data infrastructure that meet the needs of these diverse users. AHRQ has previously supported the creation of 2 distributed research networks as a new approach to conduct comparative effectiveness research (CER) while protecting a patient's confidential information and the proprietary needs of a clinical organization. It has applied its experience in building these networks in directing the American Recovery and Reinvestment Act funds for CER to support new clinical electronic infrastructure projects that can be used for several purposes including CER, quality improvement, clinical decision support, and disease surveillance. In addition, AHRQ has funded a new Electronic Data Methods forum to advance the methods in clinical informatics, research analytics, and governance by actively engaging investigators from the American Recovery and Reinvestment Act-funded projects and external stakeholders.

Magnetization and vortex profiles in the honeycomb network of Pb

International Nuclear Information System (INIS)

Yoshikawa, Hirokazu; Noda, Hiroshi; Sato, Osamu; Kato, Masaru; Satoh, Kazuo; Yotsuya, Tsutomu; Ishida, Takekazu

2005-01-01

We have investigated a honeycomb microhole network of Pb film by a SQUID magnetometer and a SQUID microscope. A negative pattern of honeycomb network of photoresist has been fabricated by an electron beam lithography. A film of 200-nm thickness was prepared by the evaporation of Pb on the photoresist pattern, where the silicon substrate is 4 x 4 mm in size. The period of the network is 7.4 μm and line width is 1 μm. We found the matching effect in a M-H curve of the Pb honeycomb network by the SQUID magnetometer. The applied field ranges from -4.7 G to +4.7 G. Vortex configurations in the honeycomb network of the period 15 μm and line width 2 μm have also been observed by the SQUID microscope. We suggest that vortices form some local triangular configurations at lower temperatures

Optical code-division multiple-access networks

Science.gov (United States)

Andonovic, Ivan; Huang, Wei

1999-04-01

This review details the approaches adopted to implement classical code division multiple access (CDMA) principles directly in the optical domain, resulting in all optical derivatives of electronic systems. There are a number of ways of realizing all-optical CDMA systems, classified as incoherent and coherent based on spreading in the time and frequency dimensions. The review covers the basic principles of optical CDMA (OCDMA), the nature of the codes used in these approaches and the resultant limitations on system performance with respect to the number of stations (code cardinality), the number of simultaneous users (correlation characteristics of the families of codes), concluding with consideration of network implementation issues. The latest developments will be presented with respect to the integration of conventional time spread codes, used in the bulk of the demonstrations of these networks to date, with wavelength division concepts, commonplace in optical networking. Similarly, implementations based on coherent correlation with the aid of a local oscillator will be detailed and comparisons between approaches will be drawn. Conclusions regarding the viability of these approaches allowing the goal of a large, asynchronous high capacity optical network to be realized will be made.

Efficient Reactive Power Compensation Algorithm for Distribution Network

Directory of Open Access Journals (Sweden)

J. Jerome

2017-12-01

Full Text Available The use of automation and energy efficient equipment with electronic control would greatly improve industrial production.  These new devices are more sensitive to supply voltage deviation and the characteristics of the power system that was previously ignored are now very important. Hence the benefits of distribution automation have been widely acknowledged in recent years. This paper proposes an efficient load flow solution technique extended to find optimum location for reactive power compensation and network reconfiguration for planning and day-to-day operation of distribution networks.  This is required as a part of the distribution automation system (DAS for taking various control and operation decisions.  The method exploits the radial nature of the network and uses forward and backward propagation technique to calculate branch currents and node voltages.  The proposed method has been tested to analyze several practical distribution networks of various voltage levels and also having high R/X ratio.

CORPORATE SOCIAL NETWORKS IN EDUCATION: EXPERIENCE OF USE

Directory of Open Access Journals (Sweden)

Lytvynova S.

2017-12-01

Full Text Available The paper discusses methods, forms and safety issues of social network usage for school students. Taking into consideration the growing interest of students to electronic communication in social networks (ESN, their place in the information educational environment is described. The classification of objects and use of ESNs was made to help teachers and school authority to teach students in the corporate social network. The basic components of corporate social networks (СESN were revealed: forms of learning activity (individual, group, and collective, forms of learning organization (quiz, debates, discussions, photo-story, essay contest, a virtual tour, mini design web quest, and conference video-lesson, and database. Particular aspects of the use of certain forms for students training in ESN aсcording to the type of social objects (messages, individual messages, video files, photos, audio files, documents, comments, and blitz-survey were defined. Student safety when using ESN and СESN impact on a student social and cultural intelligence development are discussed as well.

Digital intelligent booster for DCC miniature train networks

Science.gov (United States)

Ursu, M. P.; Condruz, D. A.

2017-08-01

Modern miniature trains are now driven by means of the DCC (Digital Command and Control) system, which allows the human operator or a personal computer to launch commands to each individual train or even to control different features of the same train. The digital command station encodes these commands and sends them to the trains by means of electrical pulses via the rails of the railway network. Due to the development of the miniature railway network, it may happen that the power requirement of the increasing number of digital locomotives, carriages and accessories exceeds the nominal output power of the digital command station. This digital intelligent booster relieves the digital command station from powering the entire railway network all by itself, and it automatically handles the multiple powered sections of the network. This electronic device is also able to detect and process short-circuits and overload conditions, without the intervention of the digital command station.

Quasirelativism, narrowband properties and forced dynamics of electrons in solids

CERN Document Server

Pavlov, B S; Strepetov, A V

2002-01-01

The narrow-zone semiconductors, which are applied for creating the quantum networks, characterized by small effective masses of electrons at the Fermi level and consequently by high electron mobility in the lattice. The obviously soluble model, clarifying one of the possible mechanisms for the small effective masses origination, is constructed in the proposed work. The other mathematical model, constructed in this work, describes the possible mechanism for controlling the alternating quantum current by the one-dimensional lattice through a travelling wave

Implementing e-network-supported inquiry learning in science

DEFF Research Database (Denmark)

Williams, John; Cowie, Bronwen; Khoo, Elaine

2013-01-01

The successful implementation of electronically networked (e-networked) tools to support an inquiry-learning approach in secondary science classrooms is dependent on a range of factors spread between teachers, schools, and students. The teacher must have a clear understanding of the nature......-construct knowledge using a wide range of resources for meaning making and expression of ideas. These outcomes were, however, contingent on the interplay of teacher understanding of the nature of science inquiry and school provision of an effective technological infrastructure and support for flexible curriculum...... of inquiry, the school must provide effective technological infrastructure and sympathetic curriculum parameters, and the students need to be carefully scaffolded to the point of engaging with the inquiry process. Within this study, e-networks supported students to exercise agency, collaborate, and co...

Network chemistry, network toxicology, network informatics, and network behavioristics: A scientific outline

OpenAIRE

WenJun Zhang

2016-01-01

In present study, I proposed some new sciences: network chemistry, network toxicology, network informatics, and network behavioristics. The aims, scope and scientific foundation of these sciences are outlined.

Magneto-optical imaging of vortex arrangements in Pb finite superconducting networks

International Nuclear Information System (INIS)

Tsuchiya, Y.; Nakajima, Y.; Tamegai, T.

2009-01-01

We have fabricated finite-sized Pb superconducting networks with 10 x 10 square (each 6 x 6 μm 2 ) holes by using the electron beam lithography and vortex arrangements are visualized by using magneto-optical imaging. We find that the vortex penetration at low temperature is controlled by defects in the network. We also find nearly regular arrangements of vortices with defects close to 1/2 and1/3 of the matching field.

Technical Survey on Applications of Wireless Sensor Networks in Nuclear Power Plants

International Nuclear Information System (INIS)

Jiang, Jin; Bari, Ataul; Chen, Dongyi; Hashemian, Hash M.

2014-01-01

Even though there is no general consensus on using wireless technologies in nuclear power plants, potential applications of wireless sensor networks within nuclear power plants (NPPs) has been investigated. The topics of interests include potential interaction of wireless sensor networks with the sensitive protection equipment, radiation damage of the electronics on board sensor nodes, optimal placement of relay nodes that collect and forward data in the network, and possible applications, such as radiation dose and level monitoring, and equipment condition monitoring. Several wireless sensor networks have been deployed on site of NPPs on a trial basis to perform these tasks. Different aspects of deployment of such wireless sensor networks in NPPs have also been examined. Industrial standards or guidelines for deployment of WSNs in NPPs are also been considered. This paper examines the state of the art of wireless sensor networks in NPPs

Technical Survey on Applications of Wireless Sensor Networks in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Jiang, Jin; Bari, Ataul [University of Western Ontario, Ontario (Canada); Chen, Dongyi [University of Electronic Science and Technology of China, Chengdu (China); Hashemian, Hash M. [AMS Technology Center, Knoxville (United States)

2014-08-15

Even though there is no general consensus on using wireless technologies in nuclear power plants, potential applications of wireless sensor networks within nuclear power plants (NPPs) has been investigated. The topics of interests include potential interaction of wireless sensor networks with the sensitive protection equipment, radiation damage of the electronics on board sensor nodes, optimal placement of relay nodes that collect and forward data in the network, and possible applications, such as radiation dose and level monitoring, and equipment condition monitoring. Several wireless sensor networks have been deployed on site of NPPs on a trial basis to perform these tasks. Different aspects of deployment of such wireless sensor networks in NPPs have also been examined. Industrial standards or guidelines for deployment of WSNs in NPPs are also been considered. This paper examines the state of the art of wireless sensor networks in NPPs.

The wired generation: academic and social outcomes of electronic media use among university students.

Science.gov (United States)

Jacobsen, Wade C; Forste, Renata

2011-05-01

Little is known about the influence of electronic media use on the academic and social lives of university students. Using time-diary and survey data, we explore the use of various types of electronic media among first-year students. Time-diary results suggest that the majority of students use electronic media to multitask. Robust regression results indicate a negative relationship between the use of various types of electronic media and first-semester grades. In addition, we find a positive association between social-networking-site use, cellular-phone communication, and face-to-face social interaction.

A fully electronic intensity-modulated radiation therapy quality assurance (IMRT QA) process implemented in a network comprised of independent treatment planning, record and verify, and delivery systems

International Nuclear Information System (INIS)

Bailey, Daniel W; Kumaraswamy, Lalith; Podgorsak, Matthew B

2010-01-01

The purpose of this study is to implement an electronic method to perform and analyze intensity-modulated radiation therapy quality assurance (IMRT QA) using an aSi megavoltage electronic portal imaging device in a network comprised of independent treatment planning, record and verify (R&V), and delivery systems. A verification plan was generated in the treatment planning system using the actual treatment plan of a patient. After exporting the treatment fields to the R&V system, the fields were delivered in QA mode with the aSi imager deployed. The resulting dosimetric images are automatically stored in a DICOM-RT format in the delivery system treatment console computer. The relative dose density images are subsequently pushed to the R&V system. The absolute dose images are then transferred electronically from the treatment console computer to the treatment planning system and imported into the verification plan in the dosimetry work space for further analysis. Screen shots of the gamma evaluation and isodose comparison are imported into the R&V system as an electronic file (e.g. PDF) to be reviewed prior to initiation of patient treatment. A relative dose image predicted by the treatment planning system can also be sent to the R&V system to be compared with the relative dose density image measured with the aSi imager. Our department does not have integrated planning, R&V, and delivery systems. In spite of this, we are able to fully implement a paperless and filmless IMRT QA process, allowing subsequent analysis and approval to be more efficient, while the QA document is directly attached to its specific patient chart in the R&V system in electronic form. The calculated and measured relative dose images can be compared electronically within the R&V system to analyze the density differences and ensure proper dose delivery to patients. In the absence of an integrated planning, verifying, and delivery system, we have shown that it is nevertheless possible to develop a

Solvation of excess electrons trapped in charge pockets on molecular surfaces

Science.gov (United States)

Jalbout, Abraham F.

This work considers the ability of hydrogen fluoride (HF) to solvate excess electrons located on cyclic hydrocarbon surfaces. The principle applied involves the formation of systems in which excess electrons can be stabilized not only on concentrated molecular surface charge pockets but also by HF. Recent studies have shown that OH groups can form stable hydrogen-bonded networks on one side of a hydrocarbon surface (i.e. cyclohexane sheets), at the same time, the hydrogen atoms on the opposite side of this surface form a pocket of positive charge can attract the excess electron. This density can be further stabilized by the addition of an HF molecule that can form an 'anion with an internally solvated electron' (AISE) state. These systems are shown to be stable with respect to vertical electron detachment (VDE).

A molecular quantum spin network controlled by a single qubit.

Science.gov (United States)

Schlipf, Lukas; Oeckinghaus, Thomas; Xu, Kebiao; Dasari, Durga Bhaktavatsala Rao; Zappe, Andrea; de Oliveira, Felipe Fávaro; Kern, Bastian; Azarkh, Mykhailo; Drescher, Malte; Ternes, Markus; Kern, Klaus; Wrachtrup, Jörg; Finkler, Amit

2017-08-01

Scalable quantum technologies require an unprecedented combination of precision and complexity for designing stable structures of well-controllable quantum systems on the nanoscale. It is a challenging task to find a suitable elementary building block, of which a quantum network can be comprised in a scalable way. We present the working principle of such a basic unit, engineered using molecular chemistry, whose collective control and readout are executed using a nitrogen vacancy (NV) center in diamond. The basic unit we investigate is a synthetic polyproline with electron spins localized on attached molecular side groups separated by a few nanometers. We demonstrate the collective readout and coherent manipulation of very few (≤ 6) of these S = 1/2 electronic spin systems and access their direct dipolar coupling tensor. Our results show that it is feasible to use spin-labeled peptides as a resource for a molecular qubit-based network, while at the same time providing simple optical readout of single quantum states through NV magnetometry. This work lays the foundation for building arbitrary quantum networks using well-established chemistry methods, which has many applications ranging from mapping distances in single molecules to quantum information processing.

Microwave synthesis of copper network onto lithium iron phosphate cathode materials for improved electrochemical performance

Energy Technology Data Exchange (ETDEWEB)

Hsieh, Chien-Te, E-mail: cthsieh@saturn.yzu.edu.tw [Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan 320, Taiwan (China); Liu, Juan-Ru [Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan 320, Taiwan (China); Juang, Ruey-Shin [Department of Chemical and Materials Engineering, Chang Gung University, Taoyuan 333, Taiwan (China); Lee, Cheng-En; Chen, Yu-Fu [Department of Chemical Engineering and Materials Science, Yuan Ze University, Taoyuan 320, Taiwan (China)

2015-03-01

Herein reported is an efficient microwave-assisted (MA) approach for growing Cu network onto LiFePO{sub 4} (LFP) powders as cathode materials for high-performance Li-ion batteries. The MA approach is capable of depositing highly-porous Cu network, fully covered the LFP powders. The electrochemical performance of Cu-coated LFP cathodes are well characterized by charge/discharge cycling and electrochemical impedance spectroscopy (EIS). The Cu network acts as the key role in improving the specific capacity, rate capability, electrode polarization, as compared to fresh LFP cathode without the Cu coating. The EIS incorporated with equivalent circuit reveals that the completed Cu network obviously suppresses the charge transfer resistance. This result can be attributed to the fact that the Cu network ensures the LFP crystals to get electron easily, alleviating the electrode polarization in view of one-dimensional Li{sup +} ion mobility in the olivine crystals. Based on the analysis of Randles plots, the relatively higher Li{sup +} diffusion coefficient reflects the more efficient Li{sup +} pathway in the LFP powders through the aid of porous Cu network. - Highlights: • An efficient route was used to prepare Cu/LiFePO{sub 4} (LFP) hybrid as cathode material. • The Cu/LFP cathodes exhibit an improved performance as compared to fresh LFP one. • The microwave approach can deposit Cu network, fully covered the LFP powders. • The Cu network ensures LFP to get electrons, alleviating electrode polarization.

Microwave synthesis of copper network onto lithium iron phosphate cathode materials for improved electrochemical performance

International Nuclear Information System (INIS)

Hsieh, Chien-Te; Liu, Juan-Ru; Juang, Ruey-Shin; Lee, Cheng-En; Chen, Yu-Fu

2015-01-01

Herein reported is an efficient microwave-assisted (MA) approach for growing Cu network onto LiFePO 4 (LFP) powders as cathode materials for high-performance Li-ion batteries. The MA approach is capable of depositing highly-porous Cu network, fully covered the LFP powders. The electrochemical performance of Cu-coated LFP cathodes are well characterized by charge/discharge cycling and electrochemical impedance spectroscopy (EIS). The Cu network acts as the key role in improving the specific capacity, rate capability, electrode polarization, as compared to fresh LFP cathode without the Cu coating. The EIS incorporated with equivalent circuit reveals that the completed Cu network obviously suppresses the charge transfer resistance. This result can be attributed to the fact that the Cu network ensures the LFP crystals to get electron easily, alleviating the electrode polarization in view of one-dimensional Li + ion mobility in the olivine crystals. Based on the analysis of Randles plots, the relatively higher Li + diffusion coefficient reflects the more efficient Li + pathway in the LFP powders through the aid of porous Cu network. - Highlights: • An efficient route was used to prepare Cu/LiFePO 4 (LFP) hybrid as cathode material. • The Cu/LFP cathodes exhibit an improved performance as compared to fresh LFP one. • The microwave approach can deposit Cu network, fully covered the LFP powders. • The Cu network ensures LFP to get electrons, alleviating electrode polarization

ELECTRONIC PAYMENT SYSTEM AND ITS PROTECTION

Directory of Open Access Journals (Sweden)

Miroslav Milutinovic

2015-01-01

Full Text Available All developed countries are in transition from the IT economy to a web economy - the biggest technological innovation that will have a long-term positive effect on the formation of the economic growth rate, the major structural changes and on the differentiated effects on the economic areas that are, at a faster or a slower rate, being included in this technological change. The electronic commerce or e-commerce has a huge potential for development. The electronic commerce between the companies (B-2-B is significantly greater compared to retail electronic commerce (B-2-C. In both spheres of trade, the Internet is used as a platform for the transfer of information and for concluding business deals. Market economy requires Accelerated Payment Processing which is achieved by introducing and improving the electronic payment procedures. There is an emphasized dichotomy between the two spheres of the payment system: large-value and small-value payments. The large value payment systems can be described as the arteries of the payment system, and the small-value transfer systems as a complex network of veins that bind the entire economy.

Self-organized semiconductor nano-network on graphene

Science.gov (United States)

Son, Dabin; Kim, Sang Jin; Lee, Seungmin; Bae, Sukang; Kim, Tae-Wook; Kang, Jae-Wook; Lee, Sang Hyun

2017-04-01

A network structure consisting of nanomaterials with a stable structural support and charge path on a large area is desirable for various electronic and optoelectronic devices. Generally, network structures have been fabricated via two main strategies: (1) assembly of pre-grown nanostructures onto a desired substrate and (2) direct growth of nanomaterials onto a desired substrate. In this study, we utilized the surface defects of graphene to form a nano-network of ZnO via atomic layer deposition (ALD). The surface of pure and structurally perfect graphene is chemically inert. However, various types of point and line defects, including vacancies/adatoms, grain boundaries, and ripples in graphene are generated by growth, chemical or physical treatments. The defective sites enhance the chemical reactivity with foreign atoms. ZnO nanoparticles formed by ALD were predominantly deposited at the line defects and agglomerated with increasing ALD cycles. Due to the formation of the ZnO nano-network, the photocurrent between two electrodes was clearly changed under UV irradiation as a result of the charge transport between ZnO and graphene. The line patterned ZnO/graphene (ZnO/G) nano-network devices exhibit sensitivities greater than ten times those of non-patterned structures. We also confirmed the superior operation of a fabricated flexible photodetector based on the line patterned ZnO/G nano-network.

A graphene oxide-carbon nanotube grid for high-resolution transmission electron microscopy of nanomaterials

International Nuclear Information System (INIS)

Zhang Lina; Zhang Haoxu; Zhou Ruifeng; Chen Zhuo; Li Qunqing; Fan Shoushan; Jiang Kaili; Ge Guanglu; Liu Renxiao

2011-01-01

A novel grid for use in transmission electron microscopy is developed. The supporting film of the grid is composed of thin graphene oxide films overlying a super-aligned carbon nanotube network. The composite film combines the advantages of graphene oxide and carbon nanotube networks and has the following properties: it is ultra-thin, it has a large flat and smooth effective supporting area with a homogeneous amorphous appearance, high stability, and good conductivity. The graphene oxide-carbon nanotube grid has a distinct advantage when characterizing the fine structure of a mass of nanomaterials over conventional amorphous carbon grids. Clear high-resolution transmission electron microscopy images of various nanomaterials are obtained easily using the new grids.

Electronic and Optical Properties of Twisted Bilayer Graphene

Science.gov (United States)

Huang, Shengqiang

The ability to isolate single atomic layers of van der Waals materials has led to renewed interest in the electronic and optical properties of these materials as they can be fundamentally different at the monolayer limit. Moreover, these 2D crystals can be assembled together layer by layer, with controllable sequence and orientation, to form artificial materials that exhibit new features that are not found in monolayers nor bulk. Twisted bilayer graphene is one such prototype system formed by two monolayer graphene layers placed on top of each other with a twist angle between their lattices, whose electronic band structure depends on the twist angle. This thesis presents the efforts to explore the electronic and optical properties of twisted bilayer graphene by Raman spectroscopy and scanning tunneling microscopy measurements. We first synthesize twisted bilayer graphene with various twist angles via chemical vapor deposition. Using a combination of scanning tunneling microscopy and Raman spectroscopy, the twist angles are determined. The strength of the Raman G peak is sensitive to the electronic band structure of twisted bilayer graphene and therefore we use this peak to monitor changes upon doping. Our results demonstrate the ability to modify the electronic and optical properties of twisted bilayer graphene with doping. We also fabricate twisted bilayer graphene by controllable stacking of two graphene monolayers with a dry transfer technique. For twist angles smaller than one degree, many body interactions play an important role. It requires eight electrons per moire unit cell to fill up each band instead of four electrons in the case of a larger twist angle. For twist angles smaller than 0.4 degree, a network of domain walls separating AB and BA stacking regions forms, which are predicted to host topologically protected helical states. Using scanning tunneling microscopy and spectroscopy, these states are confirmed to appear on the domain walls when inversion