Transistor electronics use of semiconductor components in switching operations

CERN Document Server

Rumpf, Karl-Heinz

2014-01-01

Transistor Electronics: Use of Semiconductor Components in Switching Operations presents the semiconductor components as well as their elementary circuits. This book discusses the scope of application of electronic devices to increase productivity. Organized into eight chapters, this book begins with an overview of the general equation for the representation of integer positive numbers. This text then examines the properties and characteristics of basic electronic components, which relates to an understanding of the operation of semiconductors. Other chapters consider the electronic circuit ar

Compatibility and testing of electronic components

CERN Document Server

Jowett, C E

2013-01-01

Compatibility and Testing of Electronic Components outlines the concepts of component part life according to thresholds of failure; the advantages that result from identifying such thresholds; their identification; and the various tests used in their detection. The book covers topics such as the interconnection of miniature passive components; the integrated circuit compatibility and its components; the semiconductor joining techniques; and the thin film hybrid approach in integrated circuits. Also covered are topics such as thick film resistors, conductors, and insulators; thin inlays for el

Institutional disposition and management of end-of-life electronics.

Science.gov (United States)

Babbitt, Callie W; Williams, Eric; Kahhat, Ramzy

2011-06-15

Institutions both public and private face a challenge to develop policies to manage purchase, use, and disposal of electronics. Environmental considerations play an increasing role in addition to traditional factors of cost, performance and security. Characterizing current disposition practices for end-of-life electronics is a key step in developing policies that prevent negative environmental and health impacts while maximizing potential for positive social and economic benefits though reuse. To provide a baseline, we develop the first characterization of quantity, value, disposition, and flows of end-of-life electronics at a major U.S. educational institution. Results of the empirical study indicate that most end-of-first-life electronics were resold through public auction to individuals and small companies who refurbish working equipment for resale or sell unusable products for reclamation of scrap metal. Desktop and laptop computers sold for refurbishing and resale averaged U.S. $20-100 per unit, with computers sold directly to individuals for reuse reaching $250-350 per unit. This detailed assessment was coupled with a benchmarking survey of end-of-life electronics management practices at other U.S. universities. Survey results indicate that while auctions are still commonplace, an increasing number of institutions are responding to environmental concerns by creating partnerships with local recycling and resale entities and mandating domestic recycling. We use the analyses of current disposition practices as input to discuss institutional strategies for managing electronics. One key issue is the tension between benefits of used equipment sales, in terms of income for the institution and increased reuse for society, and the environmental risks because of unknown downstream practices.

An automatic chip structure optical inspection system for electronic components

Science.gov (United States)

Song, Zhichao; Xue, Bindang; Liang, Jiyuan; Wang, Ke; Chen, Junzhang; Liu, Yunhe

2018-01-01

An automatic chip structure inspection system based on machine vision is presented to ensure the reliability of electronic components. It consists of four major modules, including a metallographic microscope, a Gigabit Ethernet high-resolution camera, a control system and a high performance computer. An auto-focusing technique is presented to solve the problem that the chip surface is not on the same focusing surface under the high magnification of the microscope. A panoramic high-resolution image stitching algorithm is adopted to deal with the contradiction between resolution and field of view, caused by different sizes of electronic components. In addition, we establish a database to storage and callback appropriate parameters to ensure the consistency of chip images of electronic components with the same model. We use image change detection technology to realize the detection of chip images of electronic components. The system can achieve high-resolution imaging for chips of electronic components with various sizes, and clearly imaging for the surface of chip with different horizontal and standardized imaging for ones with the same model, and can recognize chip defects.

Ageing and obsolescence of electronic components

International Nuclear Information System (INIS)

Garnero, E.; Daguzan, Ph.; Guillas, J.; Schweitz, G.

1998-01-01

Nowadays, every electronic equipment has to cope with two major problems. On the one hand, faster and faster obsolescence of electronic devices is a new trend which happens to prevent users from repairing their boards when parts are no more available. On the other hand, ageing of electronic components can lead to a massive amount of simultaneous failures on huge systems. This phenomenon is unfortunately emphasized when all systems date back to the same period of time. This paper aims at showing the mechanisms involved in these processes. It also describes the solutions found at EDF to face this situation. (authors)

The Effects of Institutional Classification and Gender on Faculty Inclusion of Syllabus Components

Science.gov (United States)

Doolittle, Peter E.; Lusk, Danielle L.

2007-01-01

The purpose of this research was to explore the effects that gender and institutional classification have on the inclusion of syllabus components. Course syllabi (N = 350) written by men and women from seven types of institutions, based on Carnegie classification, were sampled and evaluated for the presence of 26 syllabus components. The gender…

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective.

Science.gov (United States)

Kaushik, Vishakha; Lee, Jaehong; Hong, Juree; Lee, Seulah; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Lee, Taeyoon

2015-09-07

Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

Textile-Based Electronic Components for Energy Applications: Principles, Problems, and Perspective

Directory of Open Access Journals (Sweden)

Vishakha Kaushik

2015-09-01

Full Text Available Textile-based electronic components have gained interest in the fields of science and technology. Recent developments in nanotechnology have enabled the integration of electronic components into textiles while retaining desirable characteristics such as flexibility, strength, and conductivity. Various materials were investigated in detail to obtain current conductive textile technology, and the integration of electronic components into these textiles shows great promise for common everyday applications. The harvest and storage of energy in textile electronics is a challenge that requires further attention in order to enable complete adoption of this technology in practical implementations. This review focuses on the various conductive textiles, their methods of preparation, and textile-based electronic components. We also focus on fabrication and the function of textile-based energy harvesting and storage devices, discuss their fundamental limitations, and suggest new areas of study.

Electron Gun for Computer-controlled Welding of Small Components

Czech Academy of Sciences Publication Activity Database

Dupák, Jan; Vlček, Ivan; Zobač, Martin

2001-01-01

Roč. 62, 2-3 (2001), s. 159-164 ISSN 0042-207X R&D Projects: GA AV ČR IBS2065015 Institutional research plan: CEZ:AV0Z2065902 Keywords : Electron beam-welding machine * Electron gun * Computer- control led beam Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.541, year: 2001

Arbitrary amplitude fast electron-acoustic solitons in three-electron component space plasmas

Energy Technology Data Exchange (ETDEWEB)

Mbuli, L. N.; Maharaj, S. K. [South African National Space Agency (SANSA) Space Science, P.O. Box 32, Hermanus 7200, Republic of South Africa (South Africa); Department of Physics, University of the Western Cape (UWC), Robert Sobukwe Road, Bellville 7535, Republic of South Africa (South Africa); Bharuthram, R. [Department of Physics, University of the Western Cape (UWC), Robert Sobukwe Road, Bellville 7535, Republic of South Africa (South Africa); Singh, S. V.; Lakhina, G. S. [Indian Institute of Geomagnetism, New Panvel (West), Navi Mumbai 410218 (India); Department of Physics, University of the Western Cape (UWC), Robert Sobukwe Road, Bellville 7535, Republic of South Africa (South Africa)

2016-06-15

We examine the characteristics of fast electron-acoustic solitons in a four-component unmagnetised plasma model consisting of cool, warm, and hot electrons, and cool ions. We retain the inertia and pressure for all the plasma species by assuming adiabatic fluid behaviour for all the species. By using the Sagdeev pseudo-potential technique, the allowable Mach number ranges for fast electron-acoustic solitary waves are explored and discussed. It is found that the cool and warm electron number densities determine the polarity switch of the fast electron-acoustic solitons which are limited by either the occurrence of fast electron-acoustic double layers or warm and hot electron number density becoming unreal. For the first time in the study of solitons, we report on the coexistence of fast electron-acoustic solitons, in addition to the regular fast electron-acoustic solitons and double layers in our multi-species plasma model. Our results are applied to the generation of broadband electrostatic noise in the dayside auroral region.

Evaluation of runaway-electron effects on plasma-facing components for NET

Science.gov (United States)

Bolt, H.; Calén, H.

1991-03-01

Runaway electrons which are generated during disruptions can cause serious damage to plasma facing components in a next generation device like NET. A study was performed to quantify the response of NET plasma facing components to runaway-electron impact. For the determination of the energy deposition in the component materials Monte Carlo computations were performed. Since the subsurface metal structures can be strongly heated under runaway-electron impact from the computed results damage threshold values for the thermal excursions were derived. These damage thresholds are strongly dependent on the materials selection and the component design. For a carbonmolybdenum divertor with 10 and 20 mm carbon armour thickness and 1 degree electron incidence the damage thresholds are 100 MJ/m 2 and 220 MJ/m 2. The thresholds for a carbon-copper divertor under the same conditions are about 50% lower. On the first wall damage is anticipated for energy depositions above 180 MJ/m 2.

The Regulation of electronic money institutions in the SADC region ...

African Journals Online (AJOL)

It looks in particular at how the institutions that issue new electronic money products are regulated ... This development has become global and involves both developed and developing countries, including regions such as the SADC. ... regulatory challenges that came about with the development of electronic money and to ...

21 CFR 11.200 - Electronic signature components and controls.

Science.gov (United States)

2010-04-01

... signature components and controls. (a) Electronic signatures that are not based upon biometrics shall: (1) Employ at least two distinct identification components such as an identification code and password. (i... signatures based upon biometrics shall be designed to ensure that they cannot be used by anyone other than...

Measuring processes with opto-electronic semiconductor components

International Nuclear Information System (INIS)

1985-01-01

This is a report on the state of commercially available semiconductor emitters and detectors for the visible, near, middle and remote infrared range. A survey is given on the distance, speed, flow and length measuring techniques using opto-electronic components. Automatic focussing, the use of light barriers, non-contact temperature measurements, spectroscopic gas, liquid and environmental measurement techniques and gas analysis in medical techniques show further applications of the new components. The modern concept of guided radiation in optical fibres and their use in system technology is briefly explained. (DG) [de

Paul Scherrer Institut Annual Report 2001. Logistics and Marketing; Paul Scherrer Institut Jahresbericht 2001. Logistik und Marketing

Energy Technology Data Exchange (ETDEWEB)

Keller, R. (ed.)

2002-07-01

The logistics and marketing department of PSI encompasses the administration for the institute, infrastructure systems support and maintenance, planning and construction of mechanical and electronical components, information technology including computer- and network support/maintenance and the scientific library for the institute, as well as security and radiation protection.

Financial Management and Job Social Skills Training Components in a Summer Business Institute

Science.gov (United States)

Donohue, Brad; Conway, Debbie; Beisecker, Monica; Murphy, Heather; Farley, Alisha; Waite, Melissa; Gugino, Kristin; Knatz, Danielle; Lopez-Frank, Carolina; Burns, Jack; Madison, Suzanne; Shorty, Carrie

2005-01-01

Ninety-two adolescents, predominantly ethnic minority high school students, participated in a structured Summer Business Institute (SBI). Participating youth were randomly assigned to receive either job social skills or financial management skills training components. Students who additionally received the job social skills training component were…

E-commerce within the South African electronic component distribution industry

OpenAIRE

2012-01-01

M.B.A. This dissertation looks at E-Commerce in the South African electronic component distribution industry. With this in mind, various questions were defined and these were used to help understand the current situation, determine the future that ECommerce should have in the industry and find a mechanism to go from the current to the future situation, the questions are as follows: Has the traditional electronic component distribution channel been made obsolete by E-Commerce? What does the...

Electron beam welding: study of process capabilities and limitations towards development of nuclear components

International Nuclear Information System (INIS)

Vadolia, Gautam; Singh, Kongkham Premjit

2015-01-01

Electron beam (EB) welding technology is an established and widely adopted technique in nuclear research and development area. Electron Beam welding is thought of as a candidate process for ITER Vacuum Vessel Fabrication. Dhruva Reactor @ BARC, Mumbai and Niobium Superconducting accelerator Cavitity @ BARC has adopted the EB welding technique as a fabrication route. The highly concentrated energy input of the electron beam has added the advantages over the conventional welding as being less HAZ and provided smooth and clean surface. EB Welding has also been used for the joining of various reactive and refractory materials. EB system as heat source has also been used for vacuum brazing application. The Welding Institute (TWI) has demonstrated that EBW is potentially suitable to produce high integrity joints in 50 mm pure copper. TWI has also examined 150 kV Reduced Pressure Electron Beam (RPEB) gun in welding 140 mm and 147 mm thickness Nuclear Reactor Pressure Vessel Steel (SA 508 grade). EBW in 10 mm thick SS316 plates were studied at IPR and results were encouraging. In this paper, the pros and cons and role of electron beam process will be studied to analyze the importance of electron beam welding in nuclear components fabrication. Importance of establishing the high precision Wire Electro Discharge Machining (WEDM) facility will also be discussed. (author)

Critical density for Landau damping in a two-electron-component plasma

Energy Technology Data Exchange (ETDEWEB)

Rupp, Constantin F.; López, Rodrigo A.; Araneda, Jaime A. [Departamento de Física, Facultad de Ciencias Físicas y Matemáticas, Universidad de Concepción, Concepción (Chile)

2015-10-15

The asymptotic evolution of an initial perturbation in a collisionless two-electron-component plasma with different temperatures is studied numerically. The transition between linear and nonlinear damping regimes is determined by slowly varying the density of the secondary electron-component using high-resolution Vlasov-Poisson simulations. It is shown that, for fixed amplitude perturbations, this transition behaves as a critical phenomenon with time scales and field amplitudes exhibiting power-law dependencies on the threshold density, similar to the critical amplitude behavior in a single-component plasma.

Electric vehicle recycling 2020: Key component power electronics.

Science.gov (United States)

Bulach, Winfried; Schüler, Doris; Sellin, Guido; Elwert, Tobias; Schmid, Dieter; Goldmann, Daniel; Buchert, Matthias; Kammer, Ulrich

2018-04-01

Electromobility will play a key role in order to reach the specified ambitious greenhouse gas reduction targets in the German transport sector of 42% between 1990 and 2030. Subsequently, a significant rise in the sale of electric vehicles (EVs) is to be anticipated in future. The amount of EVs to be recycled will rise correspondingly after a delay. This includes the recyclable power electronics modules which are incorporated in every EV as an important component for energy management. Current recycling methods using car shredders and subsequent post shredder technologies show high recycling rates for the bulk metals but are still associated with high losses of precious and strategic metals such as gold, silver, platinum, palladium and tantalum. For this reason, the project 'Electric vehicle recycling 2020 - key component power electronics' developed an optimised recycling route for recycling power electronics modules from EVs which is also practicable in series production and can be implemented using standardised technology. This 'WEEE recycling route' involves the disassembly of the power electronics from the vehicle and a subsequent recycling in an electronic end-of-life equipment recycling plant. The developed recycling process is economical under the current conditions and raw material prices, even though it involves considerably higher costs than recycling using the car shredder. The life cycle assessment shows basically good results, both for the traditional car shredder route and the developed WEEE recycling route: the latter provides additional benefits from some higher recovery rates and corresponding credits.

Reliability prediction system based on the failure rate model for electronic components

International Nuclear Information System (INIS)

Lee, Seung Woo; Lee, Hwa Ki

2008-01-01

Although many methodologies for predicting the reliability of electronic components have been developed, their reliability might be subjective according to a particular set of circumstances, and therefore it is not easy to quantify their reliability. Among the reliability prediction methods are the statistical analysis based method, the similarity analysis method based on an external failure rate database, and the method based on the physics-of-failure model. In this study, we developed a system by which the reliability of electronic components can be predicted by creating a system for the statistical analysis method of predicting reliability most easily. The failure rate models that were applied are MILHDBK- 217F N2, PRISM, and Telcordia (Bellcore), and these were compared with the general purpose system in order to validate the effectiveness of the developed system. Being able to predict the reliability of electronic components from the stage of design, the system that we have developed is expected to contribute to enhancing the reliability of electronic components

On the OSL curve shape and preheat treatment of electronic components from portable electronic devices

DEFF Research Database (Denmark)

Woda, Clemens; Greilich, Steffen; Beerten, Koen

2010-01-01

The shape of the OSL decay curve and the effect of longer time delays between accidental exposure and readout of alumina-rich electronic components from portable electronic devices are investigated. The OSL decay curve follows a hyperbolic decay function, which is interpreted as an approximation ...

A review of typical thermal fatigue failure models for solder joints of electronic components

Science.gov (United States)

Li, Xiaoyan; Sun, Ruifeng; Wang, Yongdong

2017-09-01

For electronic components, cyclic plastic strain makes it easier to accumulate fatigue damage than elastic strain. When the solder joints undertake thermal expansion or cold contraction, different thermal strain of the electronic component and its corresponding substrate is caused by the different coefficient of thermal expansion of the electronic component and its corresponding substrate, leading to the phenomenon of stress concentration. So repeatedly, cracks began to sprout and gradually extend [1]. In this paper, the typical thermal fatigue failure models of solder joints of electronic components are classified and the methods of obtaining the parameters in the model are summarized based on domestic and foreign literature research.

Principal component analysis for neural electron/jet discrimination in highly segmented calorimeters

International Nuclear Information System (INIS)

Vassali, M.R.; Seixas, J.M.

2001-01-01

A neural electron/jet discriminator based on calorimetry is developed for the second-level trigger system of the ATLAS detector. As preprocessing of the calorimeter information, a principal component analysis is performed on each segment of the two sections (electromagnetic and hadronic) of the calorimeter system, in order to reduce significantly the dimension of the input data space and fully explore the detailed energy deposition profile, which is provided by the highly-segmented calorimeter system. It is shown that projecting calorimeter data onto 33 segmented principal components, the discrimination efficiency of the neural classifier reaches 98.9% for electrons (with only 1% of false alarm probability). Furthermore, restricting data projection onto only 9 components, an electron efficiency of 99.1% is achieved (with 3% of false alarm), which confirms that a fast triggering system may be designed using few components

Developing a competitive edge in electronic markets via institutional and social based quality signaling mechanisms

NARCIS (Netherlands)

Ou, C.X.J.; Chan, K.C.C.

Much recent effort has been put into developing effective electronic markets. However, the research has mainly focused on institutional trust-building mechanisms. Practically, sellers lack guidelines in shaping competitive edges in electronic markets where institutional mechanisms have been applied

Processes for coating or sealing electronic components with synthetic varnishes

International Nuclear Information System (INIS)

Farrugia, M.; Allard, M.

1981-01-01

A method of coating or sealing electrical or electronic components with a synthetic resin composition is described which consists of moving each component along a fixed path through a coating station at which at least one surface of the component receives a coating of synthetic resin and then moving each component through a beam of ionising radiation (ultra-violet or beta radiation) for a sufficient time to induce polymerisation of the resin. Suitable resin compositions for the process are listed. (U.K.)

Virtual enterprise model for the electronic components business in the Nuclear Weapons Complex

Energy Technology Data Exchange (ETDEWEB)

Ferguson, T.J.; Long, K.S.; Sayre, J.A. [Sandia National Labs., Albuquerque, NM (United States); Hull, A.L. [Sandia National Labs., Livermore, CA (United States); Carey, D.A.; Sim, J.R.; Smith, M.G. [Allied-Signal Aerospace Co., Kansas City, MO (United States). Kansas City Div.

1994-08-01

The electronic components business within the Nuclear Weapons Complex spans organizational and Department of Energy contractor boundaries. An assessment of the current processes indicates a need for fundamentally changing the way electronic components are developed, procured, and manufactured. A model is provided based on a virtual enterprise that recognizes distinctive competencies within the Nuclear Weapons Complex and at the vendors. The model incorporates changes that reduce component delivery cycle time and improve cost effectiveness while delivering components of the appropriate quality.

Dynamic electronic institutions in agent oriented cloud robotic systems.

Science.gov (United States)

Nagrath, Vineet; Morel, Olivier; Malik, Aamir; Saad, Naufal; Meriaudeau, Fabrice

2015-01-01

The dot-com bubble bursted in the year 2000 followed by a swift movement towards resource virtualization and cloud computing business model. Cloud computing emerged not as new form of computing or network technology but a mere remoulding of existing technologies to suit a new business model. Cloud robotics is understood as adaptation of cloud computing ideas for robotic applications. Current efforts in cloud robotics stress upon developing robots that utilize computing and service infrastructure of the cloud, without debating on the underlying business model. HTM5 is an OMG's MDA based Meta-model for agent oriented development of cloud robotic systems. The trade-view of HTM5 promotes peer-to-peer trade amongst software agents. HTM5 agents represent various cloud entities and implement their business logic on cloud interactions. Trade in a peer-to-peer cloud robotic system is based on relationships and contracts amongst several agent subsets. Electronic Institutions are associations of heterogeneous intelligent agents which interact with each other following predefined norms. In Dynamic Electronic Institutions, the process of formation, reformation and dissolution of institutions is automated leading to run time adaptations in groups of agents. DEIs in agent oriented cloud robotic ecosystems bring order and group intellect. This article presents DEI implementations through HTM5 methodology.

System for Cooling of Electronic Components

Science.gov (United States)

Vasil'ev, L. L.; Grakovich, L. P.; Dragun, L. A.; Zhuravlev, A. S.; Olekhnovich, V. A.; Rabetskii, M. I.

2017-01-01

Results of computational and experimental investigations of heat pipes having a predetermined thermal resistance and a system based on these pipes for air cooling of electronic components and diode assemblies of lasers are presented. An efficient compact cooling system comprising heat pipes with an evaporator having a capillary coating of a caked copper powder and a condenser having a developed outer finning, has been deviced. This system makes it possible to remove, to the ambient air, a heat flow of power more than 300 W at a temperature of 40-50°C.

78 FR 19311 - Certain Radio Frequency Identification (“RFID”) Products And Components Thereof; Institution of...

Science.gov (United States)

2013-03-29

... Identification (``RFID'') Products And Components Thereof; Institution of Investigation Pursuant to 19 U.S.C... sale within the United States after importation of certain radio frequency identification (``RFID... after importation of certain radio frequency identification (``RFID'') products and components thereof...

Cooled electronic system with liquid-cooled cold plate and thermal spreader coupled to electronic component

Science.gov (United States)

Chainer, Timothy J.; Graybill, David P.; Iyengar, Madhusudan K.; Kamath, Vinod; Kochuparambil, Bejoy J.; Schmidt, Roger R.; Steinke, Mark E.

2018-03-27

Apparatus and method are provided for facilitating cooling of an electronic component. The apparatus includes a liquid-cooled cold plate and a thermal spreader associated with the cold plate. The cold plate includes multiple coolant-carrying channel sections extending within the cold plate, and a thermal conduction surface with a larger surface area than a surface area of the component to be cooled. The thermal spreader includes one or more heat pipes including multiple heat pipe sections. One or more heat pipe sections are partially aligned to a first region of the cold plate, that is, where aligned to the surface to be cooled, and partially aligned to a second region of the cold plate, which is outside the first region. The one or more heat pipes facilitate distribution of heat from the electronic component to coolant-carrying channel sections of the cold plate located in the second region of the cold plate.

Thermoluminescence dosimetry of electronic components from personal objects

International Nuclear Information System (INIS)

Beerten, Koen; Woda, Clemens; Vanhavere, Filip

2009-01-01

Owing to the existence of ceramic materials inside common personal objects such as cellular phones and USB flash drives, these objects may be very useful in emergency (accident) dosimetry. Here we will present initial results regarding the dosimetric properties as determined by thermoluminescence (TL) from two alumina-rich electronic components from a USB flash drive. The TL method was applied in order to investigate the potential of conventional TL equipment for such purposes. For comparison, the optically stimulated luminescence (OSL) of the components was investigated as well. The studied components are ceramic resonators and alumina-based substrates from electrical resistors. The results show that various TL-related properties such as fading, optical stability and zero-dose response are different for the two investigated components. On the basis of these properties, the ceramic resonator was selected for dose recovery tests using TL and OSL. The given dose could reliably be determined using both methods, assuming that prompt measurement and/or fading correction is possible.

KfK, Institute for Reactor Components. Results of research and development activities in 1989

International Nuclear Information System (INIS)

1990-03-01

R and D activities at IRB (Institut fuer Reaktorbauelemente - Institute for Reactor Components) are dedicated to thermodynamics and fluid dynamics. Emphasis is on the design of nuclear reactor and fusion reactor components. Environmental engineering was added recently. Most activities are applications-oriented. Fundamental investigations focus on energy research and energy technology. The activities are carried out in the framework of different projects (PKF/nuclear fusion, PSF/nuclear safety, PSU/pollution control). Points of main effort are the development of basic liquid-metal-cooled blanket solutions, investigations on natural convection in reactor tanks, and the cooling properties of future containments for pressurized water reactors in the case of nuclear fusion accidents. (orig./GL) [de

Paul Scherrer Institut Annual Report 2001. Logistics and Marketing

International Nuclear Information System (INIS)

Keller, R.

2002-01-01

The logistics and marketing department of PSI encompasses the administration for the institute, infrastructure systems support and maintenance, planning and construction of mechanical and electronical components, information technology including computer- and network support/maintenance and the scientific library for the institute, as well as security and radiation protection

Retrospective dosimetry with alumina substrate from electronic components

International Nuclear Information System (INIS)

Ekendahl, D.; Judas, L.

2012-01-01

Alumina substrate can be found in electronic components used in portable electronic devices. The material is radiation sensitive and can be applied in dosimetry using thermally or optically stimulated luminescence. Electronic portable devices such as mobile phones, USB flash discs, mp3 players, etc., which are worn close to the body, can represent personal dosemeters for members of the general public in situations of large-scale radiation accidents or malevolent acts with radioactive materials. This study investigated dosimetric properties of alumina substrates and aspects of using mobile phones as personal dosemeters. The alumina substrates exhibited favourable dosimetry characteristics. However, anomalous fading had to be properly corrected in order to achieve sufficient precision in dose estimate. Trial dose reconstruction performed by means of two mobile phones proved that mobile phones can be used for reconstruction of personal doses. (authors)

77 FR 38829 - Certain Electronic Imaging Devices; Institution of Investigation

Science.gov (United States)

2012-06-29

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-850] Certain Electronic Imaging Devices; Institution of Investigation AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on May 23, 2012...

Application of principal component and factor analyses in electron spectroscopy

International Nuclear Information System (INIS)

Siuda, R.; Balcerowska, G.

1998-01-01

Fundamentals of two methods, taken from multivariate analysis and known as principal component analysis (PCA) and factor analysis (FA), are presented. Both methods are well known in chemometrics. Since 1979, when application of the methods to electron spectroscopy was reported for the first time, they became to be more and more popular in different branches of electron spectroscopy. The paper presents examples of standard applications of the method of Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), and electron energy loss spectroscopy (EELS). Advantages one can take from application of the methods, their potentialities as well as their limitations are pointed out. (author)

NATO Advanced Study Institute on Superconducting Electronics

CERN Document Server

Nisenhoff, Martin; Superconducting Electronics

1989-01-01

The genesis of the NATO Advanced Study Institute (ASI) upon which this volume is based, occurred during the summer of 1986 when we came to the realization that there had been significant progress during the early 1980's in the field of superconducting electronics and in applications of this technology. Despite this progress, there was a perception among many engineers and scientists that, with the possible exception of a limited number of esoteric fundamental studies and applications (e.g., the Josephson voltage standard or the SQUID magnetometer), there was no significant future for electronic systems incorporating superconducting elements. One of the major reasons for this perception was the aversion to handling liquid helium or including a closed-cycle helium liquefier. In addition, many critics felt that IBM's cancellation of its superconducting computer project in 1983 was "proof" that superconductors could not possibly compete with semiconductors in high-speed signal processing. From our persp...

Light and Redox Switchable Molecular Components for Molecular Electronics

NARCIS (Netherlands)

Browne, Wesley R.; Feringa, Bernard

2010-01-01

The field of molecular and organic electronics has seen rapid progress in recent years, developing from concept and design to actual demonstration devices in which both single molecules and self-assembled monolayers are employed as light-responsive components. Research in this field has seen

Electron beam welding of aluminium components

International Nuclear Information System (INIS)

Maajid, Ali; Vadali, S.K.; Maury, D.K.

2015-01-01

Aluminium is one of the most widely used materials in industries like transportation, shipbuilding, manufacturing, aerospace, nuclear, etc. The challenges in joining of aluminium are distortion, cleanliness and quality. Main difficulties faced during fusion welding of aluminium components are removal of surface oxide layer, weld porosity, high heat input requirement, distortion, hot cracking, etc. Physical properties of aluminium such as its high thermal conductivity, high coefficient of thermal expansion, no change in colour at high temperature, large difference in the melting points of the metal and its oxide (∼ 1400 °C) compound the difficulties faced during welding. Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding (GMAW), Plasma Arc Welding (PAW), etc are generally used in industries for fusion welding of aluminium alloys. However in case of thicker jobs the above processes are not suitable due to requirements of elaborate edge preparation, preheating of jobs, fixturing to prevent distortion, etc. Moreover, precise control over the heat input during welding and weld bead penetration is not possible with above processes. Further, if heat sensitive parts are located near the weld joint then high energy density beam welding process like Electron Beam Welding (EBW) is the best possible choice for aluminium welding.This paper discusses EB welding of aluminium components, typical geometry of components, selection/optimization of welding parameters, problems faced during standardization of welding and process parameters and their remedies etc.

In-service inspection of electronics components, circuits and nuclear radiation detectors

International Nuclear Information System (INIS)

Darbhe, M.D.

2002-01-01

A nuclear reactor is a complex process plant. Like a nuclear power plant, the research reactors also employ various nuclear and process systems, the scope and number of such systems being plant-specific. In-service inspection of these systems is an important requirement and is applied at various levels of their constituent units such as detectors, electronics components, circuits and integrated systems. The sensors used cover a wide range such as neutronic, radiation, process (pressure, temperature, flow, level) and many others. The present discussion is limited to neutronic and radiation detectors. The electronic components used normally consist of passive components like resistors, capacitors, semiconductor components like diodes, transistors, analog integrated circuits and digital integrated circuits and electromagnetic relays, to name a few. In order to have a comprehensive surveillance and ISI plan, over the entire plant life, it is necessary to understand various mechanisms, which degrade the performance of these systems. These are discussed initially and later various ISI methods that are used on component-circuit or system level, to ensure optimum system performance, are discussed. The computerised systems, because of hardware and software considerations, have to be given special attention, and the same are discussed briefly

Light and redox switchable molecular components for molecular electronics.

Science.gov (United States)

Browne, Wesley R; Feringa, Ben L

2010-01-01

The field of molecular and organic electronics has seen rapid progress in recent years, developing from concept and design to actual demonstration devices in which both single molecules and self-assembled monolayers are employed as light-responsive components. Research in this field has seen numerous unexpected challenges that have slowed progress and the initial promise of complex molecular-based computers has not yet been realised. Primarily this has been due to the realisation at an early stage that molecular-based nano-electronics brings with it the interface between the hard (semiconductor) and soft (molecular) worlds and the challenges which accompany working in such an environment. Issues such as addressability, cross-talk, molecular stability and perturbation of molecular properties (e.g., inhibition of photochemistry) have nevertheless driven development in molecular design and synthesis as well as our ability to interface molecular components with bulk metal contacts to a very high level of sophistication. Numerous groups have played key roles in progressing this field not least teams such as those led by Whitesides, Aviram, Ratner, Stoddart and Heath. In this short review we will however focus on the contributions from our own group and those of our collaborators, in employing diarylethene based molecular components.

The Regulation Of Electronic Money Institutions In The SADC Region: Some Lessons From The EU

Directory of Open Access Journals (Sweden)

Mmaphuti David Tuba

2014-12-01

Full Text Available This article analyses the different approaches adopted for the regulation of payment systems in a variety of legislative instruments by the European Union (EU. It looks in particular at how the institutions that issue new electronic money products are regulated and supervised by the relevant authorities in the EU, in comparison with existing institutions such as banks. It analyses some of the lessons that may be learned by the South African Development Corporation (SADC from the regulatory approaches for electronic money institutions adopted by the EU. The article asks if the approach adopted by the EU may be useful for the future regulation of electronic money institutions in the SADC. The proliferation of electronic devices that arrived with the invention of the Internet has sparked some regulatory challenges. This development has become global and involves both developed and developing countries, including regions such as the SADC. It is asked if these technological developments should be addressed by means of a concrete regulatory framework while they continue to develop, instead of the regulators waiting to observe and acquaint themselves with the relevant regulatory challenges that underpin the innovations. The EU has attempted to address the anticipated regulatory challenges that came about with the development of electronic money and to align its regulatory approach with other payment systems. This article discusses the regulatory approaches adopted in the EU and provides an overview that the SADC may use in order to adopt an effective regulatory framework for electronic money and the institutions that issue these methods of payment. It analyses both the achievements and the challenges that the EU faced (and continues to face in developing the regulation of e-money, and recommends some possible approaches derived from the lessons learned.

77 FR 27078 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

Science.gov (United States)

2012-05-08

... Phones and Tablet Computers, and Components Thereof; Notice of Receipt of Complaint; Solicitation of... entitled Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof... the United States after importation of certain electronic devices, including mobile phones and tablet...

NATO Advanced Study Institute on Electronic Structure of Polymers and Molecular Crystals

CERN Document Server

Ladik, János

1975-01-01

The NATO Advanced Study Institute on "Electronic Structure of Polymers and Molecular Crystals" was held at the Facultes Universi­ taires de Namur (F.U.N.) from September 1st till September 14th, 1974. We wish to express our appreciation to the NATO Scientific Affairs Division whose generous support made this Institute possible and to the Facultes Universitaires de Namur and the Societe Chimique de Belgique which provided fellowships and travel grants to a number of students. This volume contains the main lectures about the basic principles of the field and about different recent developments of the theory of the electronic structure of polymers and molecular crystals. The school started with the presentation of the basic SCF-LCAO theory of the electronic structure of periodic polymers and molecular crystals (contributions by Ladik, Andre & Delhalle) showing how a combination of quantum chemical and solid state physical methods can provide band structures for these systems. The numerical aspects of these ...

Results of 1989/90 research and development activities at KfK Institute for Reactor Components

International Nuclear Information System (INIS)

1991-03-01

R and D activities at IRB (Institut fuer Reaktorbauelemente - Institute for Reactor Components) are dedicated to thermodynamics and fluid dynamics. Emphasis is on the design of nuclear reactor and fusion reactor components. Environmental engineering was added recently. Most activities are applications-oriented. Fundamental investigations focus on energy research and energy technology. The activities are carried out in the framework of different projects (PKF/nuclear fusion, PSF/nuclear safety, PSU/pollution control). Points of main effort are the development of basic liquid-metal-cooled blanket solutions, investigations on natural convection in reactor ranks, and the cooling properties of future containments for pressurized water reactors in the case of nuclear fusion accidents. (orig./GL) [de

Magnetic field effects on runaway electron energy deposition in plasma facing materials and components

International Nuclear Information System (INIS)

Niemer, K.A.; Gilligan, J.G.

1992-01-01

This paper reports magnetic field effects on runaway electron energy deposition in plasma facing materials and components is investigated using the Integrated TIGER Series. The Integrated TIGER Series is a set of time-independent coupled electron/photon Monte Carlo transport codes which perform photon and electron transport, with or without macroscopic electric and magnetic fields. A three-dimensional computational model of 100 MeV electrons incident on a graphite block was used to simulate runawayelectrons striking a plasma facing component at the edge of a tokamak. Results show that more energy from runaway electrons will be deposited in a material that is in the presence of a magnetic field than in a material that is in the presence of no field. For low angle incident runaway electrons in a strong magnetic field, the majority of the increased energy deposition is near the material surface with a higher energy density. Electrons which would have been reflected with no field, orbit the magnetic field lines and are redeposited in the material surface, resulting in a substantial increase in surface energy deposition. Based on previous studies, the higher energy deposition and energy density will result in higher temperatures which are expected to cause more damage to a plasma facing component

Component-Level Electronic-Assembly Repair (CLEAR) Operational Concept

Science.gov (United States)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.; Vrnak, Daniel R.

2011-01-01

This Component-Level Electronic-Assembly Repair (CLEAR) Operational Concept document was developed as a first step in developing the Component-Level Electronic-Assembly Repair (CLEAR) System Architecture (NASA/TM-2011-216956). The CLEAR operational concept defines how the system will be used by the Constellation Program and what needs it meets. The document creates scenarios for major elements of the CLEAR architecture. These scenarios are generic enough to apply to near-Earth, Moon, and Mars missions. The CLEAR operational concept involves basic assumptions about the overall program architecture and interactions with the CLEAR system architecture. The assumptions include spacecraft and operational constraints for near-Earth orbit, Moon, and Mars missions. This document addresses an incremental development strategy where capabilities evolve over time, but it is structured to prevent obsolescence. The approach minimizes flight hardware by exploiting Internet-like telecommunications that enables CLEAR capabilities to remain on Earth and to be uplinked as needed. To minimize crew time and operational cost, CLEAR exploits offline development and validation to support online teleoperations. Operational concept scenarios are developed for diagnostics, repair, and functional test operations. Many of the supporting functions defined in these operational scenarios are further defined as technologies in NASA/TM-2011-216956.

Reliability considerations of electronics components for the deep underwater muon and neutrino detection system

International Nuclear Information System (INIS)

Leskovar, B.

1980-02-01

The reliability of some electronics components for the Deep Underwater Muon and Neutrino Detection (DUMAND) System is discussed. An introductory overview of engineering concepts and technique for reliability assessment is given. Component reliability is discussed in the contest of major factors causing failures, particularly with respect to physical and chemical causes, process technology and testing, and screening procedures. Failure rates are presented for discrete devices and for integrated circuits as well as for basic electronics components. Furthermore, the military reliability specifications and standards for semiconductor devices are reviewed

Irradiation of electronic components and circuits at the Portuguese Research Reactor: Lessons learned

Energy Technology Data Exchange (ETDEWEB)

Marques, J.G.; Ramos, A.R.; Fernandes, A.C.; Santos, J.P. [Centro de Ciencias e Tecnologias Nucleares, Instituto Superior Tecnico, Universidade de Lisboa, Estrada Nacional 10, 2695-066 Bobadela LRS (Portugal)

2015-07-01

The behavior of electronic components and circuits under radiation is a concern shared by the nuclear industry, the space community and the high-energy physics community. Standard commercial components are used as much as possible instead of radiation hard components, since they are easier to obtain and allow a significant reduction of costs. However, these standard components need to be tested in order to determine their radiation tolerance. The Portuguese Research Reactor (RPI) is a 1 MW pool-type reactor, operating since 1961. The irradiation of electronic components and circuits is one area where a 1 MW reactor can be competitive, since the fast neutron fluences required for testing are in most cases well below 10{sup 16} n/cm{sup 2}. A program was started in 1999 to test electronics components and circuits for the LHC facility at CERN, initially using a dedicated in-pool irradiation device and later a beam line with tailored neutron and gamma filters. Neutron filters are essential to reduce the intensity of the thermal neutron flux, which does not produce significant defects in electronic components but produces unwanted radiation from activation of contacts and packages of integrated circuits and also of the printed circuit boards. In irradiations performed within the line-of-sight of the core of a fission reactor there is simultaneous gamma radiation which complicates testing in some cases. Filters can be used to reduce its importance and separate testing with a pure gamma radiation source can contribute to clarify some irradiation results. Practice has shown the need to introduce several improvements to the procedures and facilities over the years. We will review improvements done in the following areas: - Optimization of neutron and gamma filters; - Dosimetry procedures in mixed neutron / gamma fields; - Determination of hardness parameter and 1 MeV-equivalent neutron fluence; - Temperature measurement and control during irradiation; - Follow-up of reactor

78 FR 34132 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

Science.gov (United States)

2013-06-06

... INTERNATIONAL TRADE COMMISSION [Docket No 2958] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Correction to Notice of Receipt of Complaint; Solicitation... of complaint entitled Certain Portable Electronic Communications Devices, Including Mobile Phones and...

Printing Electronic Components from Copper-Infused Ink and Thermoplastic Mediums

Science.gov (United States)

Flowers, Patrick F.

The demand for printable electronics has sharply increased in recent years and is projected to continue to rise. Unfortunately, electronic materials which are suitable for desired applications while being compatible with available printing techniques are still often lacking. This thesis addresses two such challenging areas. In the realm of two-dimensional ink-based printing of electronics, a major barrier to the realization of printable computers that can run programs is the lack of a solution-coatable non-volatile memory with performance metrics comparable to silicon-based devices. To address this deficiency, I developed a nonvolatile memory based on Cu-SiO2 core-shell nanowires that can be printed from solution and exhibits on-off ratios of 106, switching speeds of 50 ns, a low operating voltage of 2 V, and operates for at least 104 cycles without failure. Each of these metrics is similar to or better than Flash memory (the write speed is 20 times faster than Flash). Memory architectures based on the individual memory cells demonstrated here could enable the printing of the more complex, embedded computing devices that are expected to make up an internet of things. Recently, the exploration of three-dimensional printing techniques to fabricate electronic materials began. A suitable general-purpose conductive thermoplastic filament was not available, however. In this work I examine the current state of conductive thermoplastic filaments, including a newly-released highly conductive filament that my lab has produced which we call Electrifi. I focus on the use of dual-material fused filament fabrication (FFF) to 3D print electronic components (conductive traces, resistors, capacitors, inductors) and circuits (a fully-printed high-pass filter). The resistivity of traces printed from conductive thermoplastic filaments made with carbon-black, graphene, and copper as conductive fillers was found to be 12, 0.78, and 0.014 ohm cm, respectively, enabling the creation of

The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

International Nuclear Information System (INIS)

Salmela, Olli

2005-01-01

In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered

The effect of introducing increased-reliability-risk electronic components into 3rd generation telecommunications systems

Energy Technology Data Exchange (ETDEWEB)

Salmela, Olli [Nokia Networks, P.O. Box 301, 00045 Nokia Group (Finland)]. E-mail: olli.salmela@nokia.com

2005-08-01

In this paper, the dependability of 3rd generation telecommunications network systems is studied. Special attention is paid to a case where increased-reliability-risk electronic components are introduced to the system. The paper consists of three parts: First, the reliability data of four electronic components is considered. This includes statistical analysis of the reliability test data, thermo-mechanical finite element analysis of the printed wiring board structures, and based on those, a field reliability estimate of the components is constructed. Second, the component level reliability data is introduced into the network element reliability analysis. This is accomplished by using a reliability block diagram technique and Monte Carlo simulation of the network element. The end result of the second part is a reliability estimate of the network element with and without the high-risk component. Third, the whole 3rd generation network having multiple network elements is analyzed. In this part, the criticality of introducing high-risk electronic components into a 3rd generation telecommunications network is considered.

Stakeholder engagement: a key component of integrating genomic information into electronic health records.

Science.gov (United States)

Hartzler, Andrea; McCarty, Catherine A; Rasmussen, Luke V; Williams, Marc S; Brilliant, Murray; Bowton, Erica A; Clayton, Ellen Wright; Faucett, William A; Ferryman, Kadija; Field, Julie R; Fullerton, Stephanie M; Horowitz, Carol R; Koenig, Barbara A; McCormick, Jennifer B; Ralston, James D; Sanderson, Saskia C; Smith, Maureen E; Trinidad, Susan Brown

2013-10-01

Integrating genomic information into clinical care and the electronic health record can facilitate personalized medicine through genetically guided clinical decision support. Stakeholder involvement is critical to the success of these implementation efforts. Prior work on implementation of clinical information systems provides broad guidance to inform effective engagement strategies. We add to this evidence-based recommendations that are specific to issues at the intersection of genomics and the electronic health record. We describe stakeholder engagement strategies employed by the Electronic Medical Records and Genomics Network, a national consortium of US research institutions funded by the National Human Genome Research Institute to develop, disseminate, and apply approaches that combine genomic and electronic health record data. Through select examples drawn from sites of the Electronic Medical Records and Genomics Network, we illustrate a continuum of engagement strategies to inform genomic integration into commercial and homegrown electronic health records across a range of health-care settings. We frame engagement as activities to consult, involve, and partner with key stakeholder groups throughout specific phases of health information technology implementation. Our aim is to provide insights into engagement strategies to guide genomic integration based on our unique network experiences and lessons learned within the broader context of implementation research in biomedical informatics. On the basis of our collective experience, we describe key stakeholder practices, challenges, and considerations for successful genomic integration to support personalized medicine.

78 FR 56737 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

Science.gov (United States)

2013-09-13

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review an... on the Commission's electronic docket (EDIS) at http://edis.usitc.gov . Hearing-impaired persons are...

78 FR 49764 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

Science.gov (United States)

2013-08-15

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review n... for this investigation may be viewed on the Commission's electronic docket (EDIS) at http://edis.usitc...

78 FR 72712 - Certain Portable Electronic Communications Devices, Including Mobile Phones and Components...

Science.gov (United States)

2013-12-03

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-885] Certain Portable Electronic Communications Devices, Including Mobile Phones and Components Thereof; Commission Determination Not To Review an... this investigation may be viewed on the Commission's electronic docket (EDIS) at http://edis.usitc.gov...

27 CFR 73.11 - What are the required components and controls for acceptable electronic signatures?

Science.gov (United States)

2010-04-01

... components and controls for acceptable electronic signatures? 73.11 Section 73.11 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Signatures § 73.11...

Linear electrostatic waves in a three-component electron-positron-ion plasma

Energy Technology Data Exchange (ETDEWEB)

Mugemana, A., E-mail: mugemanaa@gmail.com; Moolla, S. [School of Chemistry and Physics, University of KwaZulu-Natal, Durban 4000 (South Africa); Lazarus, I. J. [Department of Mathematics, Statistics and Physics, Durban University of Technology, Durban 4000 (South Africa)

2014-12-15

Analytical linear electrostatic waves in a magnetized three-component electron-positron-ion plasma are studied in the low-frequency limit. By using the continuity and momentum equations with Poisson's equation, the dispersion relation for the electron-positron-ion plasma consisting of cool ions, and hot Boltzmann electrons and positrons is derived. In the linear regime, the propagation of two possible modes and their evolution are studied. In the cases of parallel and perpendicular propagation, it is shown that these two possible modes are always stable. The present investigation contributes to nonlinear propagation of electrostatic waves in space and the laboratory.

Present status of the infrared free-electron laser of the Institute of Scientific and Industrial Research, Osaka University

Energy Technology Data Exchange (ETDEWEB)

Okuda, Shuichi; Isoyama, Goro; Honda, Yoshihide; Kato, Ryukou; Tagawa, Seiichi [Osaka Univ., Ibaraki (Japan). Inst. of Scientific and Industrial Research

1997-03-01

A free-electron laser with a 38-MeV L-band linear accelerator was developed at the Institute of Scientific and Industrial Research, Osaka University. The self-amplified spontaneous emission was observed at wavelengths of 20 and 40 {mu}m with a high-intensity single-bunch beam passing through a wiggler. In the oscillation experiments with a multibunch beam laser light was obtained at wavelengths from 32 to 40 {mu}m. The peak power in a micropulse of the laser is estimated to be 8.3 MW at a wavelength of 40 {mu}m. In order to apply the laser to basic researches some components of the linac and the optical cavity are being improved. (author)

Component-Level Electronic-Assembly Repair (CLEAR) System Architecture

Science.gov (United States)

Oeftering, Richard C.; Bradish, Martin A.; Juergens, Jeffrey R.; Lewis, Michael J.; Vrnak, Daniel R.

2011-01-01

This document captures the system architecture for a Component-Level Electronic-Assembly Repair (CLEAR) capability needed for electronics maintenance and repair of the Constellation Program (CxP). CLEAR is intended to improve flight system supportability and reduce the mass of spares required to maintain the electronics of human rated spacecraft on long duration missions. By necessity it allows the crew to make repairs that would otherwise be performed by Earth based repair depots. Because of practical knowledge and skill limitations of small spaceflight crews they must be augmented by Earth based support crews and automated repair equipment. This system architecture covers the complete system from ground-user to flight hardware and flight crew and defines an Earth segment and a Space segment. The Earth Segment involves database management, operational planning, and remote equipment programming and validation processes. The Space Segment involves the automated diagnostic, test and repair equipment required for a complete repair process. This document defines three major subsystems including, tele-operations that links the flight hardware to ground support, highly reconfigurable diagnostics and test instruments, and a CLEAR Repair Apparatus that automates the physical repair process.

78 FR 6834 - Certain Cases for Portable Electronic Devices; Institution of Investigation

Science.gov (United States)

2013-01-31

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-867] Certain Cases for Portable Electronic Devices; Institution of Investigation AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on...

Numerical simulation of runaway electron effect on Plasma Facing Components

International Nuclear Information System (INIS)

Ezato, Koichiro; Suzuki, Satoshi; Akiba, Masato; Kunugi, Tomoaki

1998-07-01

The runaway electron effects on Plasma Facing Components (PFCs) are studied by the numerical analyses. The present study is the first investigation of time-dependent thermal response of PFCs caused by runaway electron impact. For this purpose, we developed a new integrated numerical code, which consists of the Monte Carlo code for the coupled electrons and photons transport analysis and the finite element code for the thermo-mechanical analysis. In this code, we apply the practical incident parameters and distribution of runaway electrons recently proposed by S. Putvinski, which can express the time-dependent behavior of runaway electrons impact. The incident parameters of electrons in this study are the energy density ranging from 10 to 75 MJ/m 2 , the average electrons' energy of 12.5 MeV, the incident angle of 0.01deg and the characteristic time constant for decay of runaway electrons event of 0.15sec. The numerical results showed that the divertor with CFC (Carbon-Fiber-Composite) armor did not suffer serious damage. On the other hand, maximum temperatures at the surface of the divertor with tungsten armor and the first wall with beryllium armor exceed the melting point in case of the incident energy density of 20 and 50 MJ/m 2 . Within the range of the incident condition of runaway electrons, the cooling pipe of each PFCs can be prevented from the melting or burn-out caused by runaway electrons impact, which is one of the possible consequences of runaway electrons event so far. (author)

Scanning electron microscopy and electron probe microanalyses of the crystalline components of human and animal dental calculi

International Nuclear Information System (INIS)

LeGeros, R.Z.; Orly, I.; LeGeros, J.P.; Gomez, C.; Kazimiroff, J.; Tarpley, T.; Kerebel, B.

1988-01-01

A review of the use of scanning electron microscopy (SEM) and electron probe microanalyses in the study of dental calculus showed that such studies provided confirmatory and supplementary data on the morphological features of human dental calculi but gave only limited information on the identity of the crystalline or inorganic components. This study aimed to explore the potential of combined SEM and microanalyses in the identification of the crystalline components of the human and animal dental calculi. Human and animal calculi were analyzed. Identification of the crystalline components were made based on the combined information of the morphology (SEM) and Ca/P molar ratios of the crystals with the morphology and Ca/P molar ratio of synthetic calcium phosphates (brushite or DCPD; octacalcium phosphate, OCP; Mg-substituted whitlockite, beta-TCMP; CO 3 -substituted apatite, (CHA); and calcite. SEM showed similarities in morphological features of human and animal dental calculi but differences in the forms of crystals present. Microanalyses and crystal morphology data suggested the presence of CaCO 3 (calcite) and CHA in the animal (cat, dog, tiger) and of OCP, beta-TCMP and CHA in human dental calculi. X-ray diffraction and infrared (IR) absorption analyses confirmed these results. This exploratory study demonstrated that by taking into consideration what is known about the crystalline components of human and animal dental calculi, combined SEM and microanalyses can provide qualitative identification

A P&T Committee's Transition to a Complete Electronic Meeting System-A Multisite Institution Experience.

Science.gov (United States)

Al-Jedai, Ahmed H; Algain, Roaa A; Alghamidi, Said A; Al-Jazairi, Abdulrazaq S; Amin, Rashid; Bin Hussain, Ibrahim Z

2017-10-01

In the last few decades, changes to formulary management processes have taken place in institutions with closed formulary systems. However, many P&T committees continued to operate using traditional paper-based systems. Paper-based systems have many limitations, including confidentiality, efficiency, open voting, and paper wastage. This becomes more challenging when dealing with a multisite P&T committee that handles formulary matters across the whole health care system. In this paper, we discuss the implementation of the first paperless, completely electronic, Web-based formulary management system across a large health care system in the Middle East. We describe the transitioning of a multisite P&T committee in a large tertiary care institution from a paper-based to an all-electronic system. The challenges and limitations of running a multisite P&T committee utilizing a paper system are discussed. The design and development of a Web-based committee floor management application that can be used from notebooks, tablets, and hand-held devices is described. Implementation of a flexible, interactive, easy-to-use, and efficient electronic formulary management system is explained in detail. The development of an electronic P&T committee meeting system that encompasses electronic document sharing, voting, and communication could help multisite health care systems unify their formularies across multiple sites. Our experience might not be generalizable to all institutions because this depends heavily on system features, existing processes and workflow, and implementation across different sites.

Investigating Effective Components of Higher Education Marketing and Providing a Marketing Model for Iranian Private Higher Education Institutions

Science.gov (United States)

Kasmaee, Roya Babaee; Nadi, Mohammad Ali; Shahtalebi, Badri

2016-01-01

Purpose: The purpose of this paper is to study and identify the effective components of higher education marketing and providing a marketing model for Iranian higher education private sector institutions. Design/methodology/approach: This study is a qualitative research. For identifying the effective components of higher education marketing and…

A test system for electronics components of the PANDA MVD

Energy Technology Data Exchange (ETDEWEB)

Lai, Alessandra; Stockmanns, Tobias; Ritman, James [Forschungszentrum Juelich (Germany); Collaboration: PANDA-Collaboration

2016-07-01

The PANDA experiment is one of the main devices at the upcoming Facility for Antiproton and Ion Research(FAIR), under construction in Darmstadt, Germany. This fixed target experiment will study the transition region between perturbative and non-perturbative QCD in the energy regime of the charmonium. The innermost sub-detector system of the target spectrometer of the PANDA experiment is the Micro Vertex Detector(MVD). Two types of silicon detectors will be used: pixel detectors and double-sided strip detectors. Two front-end chips are required: the Torino Pixel ASIC(ToPix) and the PANDA Strip ASIC(PASTA). Both are designed to transmit data at a rate of several hundred Megabits per second and are capable of handling the expected hit rate in hot spots of the detector. One key component in the development of new front-end electronics is a test system capable to handle these high rates. It should be flexible enough to test different kinds of front-end electronics and it should be easy to adapt to new prototypes. Therefore, an FPGA-based system is the ideal candidate. For this test system suitable firmware and a software framework are needed. Such a system is under development at the Forschungszentrum Juelich. The main component of the Juelich Digital Readout System(JDRS) is a Virtex 6 FPGA on a development board from Xilinx. In this talk, the mentioned read-out system are introduced, and lab tests with the front-end electronics of the MVD are presented.

Imaging Cytoskeleton Components by Electron Microscopy.

Science.gov (United States)

Svitkina, Tatyana

2016-01-01

The cytoskeleton is a complex of detergent-insoluble components of the cytoplasm playing critical roles in cell motility, shape generation, and mechanical properties of a cell. Fibrillar polymers-actin filaments, microtubules, and intermediate filaments-are major constituents of the cytoskeleton, which constantly change their organization during cellular activities. The actin cytoskeleton is especially polymorphic, as actin filaments can form multiple higher order assemblies performing different functions. Structural information about cytoskeleton organization is critical for understanding its functions and mechanisms underlying various forms of cellular activity. Because of the nanometer-scale thickness of cytoskeletal fibers, electron microscopy (EM) is a key tool to determine the structure of the cytoskeleton. This article describes application of rotary shadowing (or metal replica) EM for visualization of the cytoskeleton. The procedure is applicable to thin cultured cells growing on glass coverslips and consists of detergent extraction of cells to expose their cytoskeleton, chemical fixation to provide stability, ethanol dehydration and critical point drying to preserve three-dimensionality, rotary shadowing with platinum to create contrast, and carbon coating to stabilize replicas. This technique provides easily interpretable three-dimensional images, in which individual cytoskeletal fibers are clearly resolved, and individual proteins can be identified by immunogold labeling. More importantly, replica EM is easily compatible with live cell imaging, so that one can correlate the dynamics of a cell or its components, e.g., expressed fluorescent proteins, with high resolution structural organization of the cytoskeleton in the same cell.

77 FR 5275 - Used Electronic Products: An Examination of U.S. Exports; Institution of Investigation and...

Science.gov (United States)

2012-02-02

... INTERNATIONAL TRADE COMMISSION [Investigation No. 332-528] Used Electronic Products: An... itself, and (4) disposed of by the exporter itself; and The factors affecting trade in used electronic... International Trade Commission. ACTION: Institution of investigation and scheduling of public hearing. SUMMARY...

Optically stimulated luminescence in electronic components for emergency dosimetry

International Nuclear Information System (INIS)

Geber-Bergstrand, T.; Bernhardsson, C.; Mattsson, S.; Raeaef, C.L.

2015-01-01

Document available in abstract form only. Full text of publication follows: Accidents and, luckily more rarely, attacks involving nuclear or radiological material do occur from time to time. A very possible consequence of an accident or attack of this kind is that nearby people might be exposed to ionising radiation. Since these types of exposure situations, unlike the ones occurring in medicine, are unplanned, there are no radiation-monitoring data available. For several reasons, it is nevertheless of value to find out the dose that these people have received. The first and most urgent reason is after-the-event triage, to be able to carry out proper medical treatments and also to focus the available medical assets to the persons needing it the most. This is where different retrospective dosimetry techniques, such as luminescence, can be employed. Various electronic components from mobile phones and other portable devices have been studied using optically stimulated luminescence for their potential use in retrospective dosimetry. Previous investigations have been performed in laboratory conditions and have showed very promising properties for emergency dosimetry. In this study, the more practical parts of using electronic components in retrospective dosimetry have been considered. In a triage situation, one of the key parameters to consider is time; thus, effort has been made to speed up the readout procedure, yet without the loss of too much accuracy. (authors)

The critical components of an electronic care plan tool for primary care: an exploratory qualitative study

Directory of Open Access Journals (Sweden)

Lisa Rotenstein

2016-07-01

Full Text Available Background A critical need exists for effective electronic tools that facilitate multidisciplinary care for complex patients in patient-centered medical homes. Objective To identify the essential components of a primary care (PC based electronic care plan (ECP tool that facilitates coordination of care for complex patients. Methods Three focus groups and nine semi-structured interviews were conducted at an academic PC practice in order to identify the ideal components of an ECP. Results Critical components of an ECP identified included: 1 patient background information, including patient demographics, care team member designation and key patient contacts, 2 user- and patient-centric task management functionalities, 3 a summary of a patient’s care needs linked to the responsible member of the care team and 4 integration with the electronic medical record. We then designed an ECP mockup incorporating these components. Conclusion Our investigation identified key principles that healthcare software developers can integrate into PC and patient-centered ECP tools.

77 FR 68829 - Certain Electronic Digital Media Devices and Components Thereof; Notice of Request for Statements...

Science.gov (United States)

2012-11-16

... electronic digital media devices and components thereof imported by respondents Samsung Electronics Co, Ltd. of Korea; Samsung Electronics America, Inc. of Ridgefield Park, New Jersey; and Samsung Telecommunications America, LLC of Richardson, Texas (collectively ``Samsung''), and cease and desist orders against...

The National Site Licensing of Electronic Resources: An Institutional Perspective

Directory of Open Access Journals (Sweden)

Xiaohua Zhu

2011-06-01

Full Text Available While academic libraries in most countries are struggling to negotiate with publishers and vendors individually or collaboratively via consortia, a few countries have experimented with a different model, national site licensing (NSL. Because NSL often involves government and large-scale collaboration, it has the potential to solve many problems in the complex licensing world. However, not many nations have adopted it. This study uses historical research approach and the comparative case study research method to explore the seemingly low level of adoption. The cases include the Canadian National Site Licensing Project (CNSLP, the United Kingdom’s National Electronic Site Licensing Initiative (NESLI, and the United States, which has not adopted NSL. The theoretical framework guiding the research design and data collection is W. Richard Scott’s institutional theory, which utilizes three supporting pillars—regulative, normative, and cultural-cognitive—to analyze institutional processes. In this study, the regulative pillar and the normative pillar of NSL adoption— an institutional construction and change—are examined. Data were collected from monographs, research articles, government documents, and relevant websites. Based on the analysis of these cases, a preliminary model is proposed for the adoption of NSL. The factors that support a country’s adoption of NSL include the need for new institutions, a centralized educational policy-making system and funding system, supportive political trends, and the tradition of cooperation. The factors that may prevent a country from adopting NSL include decentralized educational policy and funding, diversity and the large number of institutions, the concern for the “Big Deal,” and the concern for monopoly.

76 FR 47610 - Certain Electronic Digital Media Devices and Components Thereof; Notice of Institution of...

Science.gov (United States)

2011-08-05

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-796] Certain Electronic Digital Media Devices and.... 1337 AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on July 5, 2011, under section...

Study of the heat flux generated by accelerated electrons on the components near the plasma

International Nuclear Information System (INIS)

Laugier, J.

2003-01-01

Experimental data have shown that a heat flux appears on components situated near the wave guide of the lower hybrid antenna of Tore-Supra. This heat flux is due to the energy release during collisions that occur between the component surface and the electrons accelerated by the high frequency field generated by the antenna. Simulations show that the electrons may reach an energy of 2-3 keV and that the heat flux generated in the shield may reach 10 MW/m 2 . In this work a correlation has been established between the local heat flux due to electron impact and the mean electrical field near the antenna: Φ (W/m 2 ) = 4.10 -4 x E -6 (10 5 V/m). It is also shown that the ratio of electrons that reach the shield is roughly not dependent on the value of the mean electrical field. In the hypothesis of a Gaussian distribution of electron initial velocities this ratio is 10%. (A.C.)

Component-Level Electronic-Assembly Repair (CLEAR) Spacecraft Circuit Diagnostics by Analog and Complex Signature Analysis

Science.gov (United States)

Oeftering, Richard C.; Wade, Raymond P.; Izadnegahdar, Alain

2011-01-01

The Component-Level Electronic-Assembly Repair (CLEAR) project at the NASA Glenn Research Center is aimed at developing technologies that will enable space-flight crews to perform in situ component-level repair of electronics on Moon and Mars outposts, where there is no existing infrastructure for logistics spares. These technologies must provide effective repair capabilities yet meet the payload and operational constraints of space facilities. Effective repair depends on a diagnostic capability that is versatile but easy to use by crew members that have limited training in electronics. CLEAR studied two techniques that involve extensive precharacterization of "known good" circuits to produce graphical signatures that provide an easy-to-use comparison method to quickly identify faulty components. Analog Signature Analysis (ASA) allows relatively rapid diagnostics of complex electronics by technicians with limited experience. Because of frequency limits and the growing dependence on broadband technologies, ASA must be augmented with other capabilities. To meet this challenge while preserving ease of use, CLEAR proposed an alternative called Complex Signature Analysis (CSA). Tests of ASA and CSA were used to compare capabilities and to determine if the techniques provided an overlapping or complementary capability. The results showed that the methods are complementary.

Analysis of electron spin resonance spectra of irradiated gingers: Organic radical components derived from carbohydrates

International Nuclear Information System (INIS)

Yamaoki, Rumi; Kimura, Shojiro; Ohta, Masatoshi

2010-01-01

Electron spin resonance (ESR) spectral characterizations of gingers irradiated with electron beam were studied. Complex asymmetrical spectra (near g=2.005) with major spectral components (line width=2.4 mT) and minor signals (at 6 mT apart) were observed in irradiated gingers. The spectral intensity decreased considerably 30 days after irradiation, and continued to decrease steadily thereafter. The spectra simulated on the basis of characteristics of free radical components derived from carbohydrates in gingers are in good agreement with the observed spectra. Analysis showed that shortly after irradiation the major radical components of gingers were composed of radical species derived from amylose and cellulose, and the amylose radicals subsequently decreased considerably. At 30 days after irradiation, the major radical components of gingers were composed of radical species derived from cellulose, glucose, fructose or sucrose.

Runaway-electron-materials interaction studies

International Nuclear Information System (INIS)

Bolt, H.; Miyahara, A.

1990-03-01

During the operation of magnetic fusion devices it has been frequently observed that runaway electrons can cause severe damage to plasma facing components. The energy of the runaway electrons could possibly reach several 100 MeV in a next generation device with an energy content in the plasma in the order of 100 MJ. In this study effects of high energy electron - materials interaction were determined by laboratory experiments using particle beam facilities, i.e. the Electron Linear Accelerator of the Institute of Scientific and Industrial Research of Osaka University and the 10 MW Neutral Beam Injection Test Stand of the National Institute for Fusion Science. The experiments and further analyses lead to a first assessment of the damage thresholds of plasma facing materials and components under runaway electron impact. It was found that metals (stainless steel, molybdenum, tungsten) showed grain growth, crack formation and/or melting already below the threshold for crack initiation on graphite (14-33 MJ/m 2 ). Strong erosion of carbon materials would occur above 100 MJ/m 2 . Damage to metal coolant channels can occur already below an energy deposition of 100 MJ/m 2 . The energy deposited in the metal coolant channels depends on the thickness of the plasma facing carbon material D, with the shielding efficiency S of carbon approximately as S∼D 1.15 . (author) 304 refs. 12 tabs. 59 figs

Failure analysis a practical guide for manufacturers of electronic components and systems

CERN Document Server

Bâzu, Marius

2011-01-01

Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers nee

Radiation load experiments with electronic components of the SYMPHONIE satellite

International Nuclear Information System (INIS)

Spencker, A.; Wagemann, H.G.; Braeunig, D.

1975-09-01

This report surveys fundamentals, realization and results of irradiation experiments which applied to 36 different electronic components of the Symphonie satellite and which were completed at the HMI Berlin and the C.N.E.T. Lannion in the years 1972/73. In a general section the evaluation of equivalent fluencies concerning 1 MeV electrons as radiation simulating the extraterrestric particle spectra with regard to the well-known semiconductor damage mechanisms is discussed. Then the realization of irradiation testing for the Symphonie satellite is described. Three selected examples demonstrate typical failure modes of semiconductor devices under radiation stress: Finally the main experimental results are shown in a standardized manner; a survey in English is given on p. 44. (orig.) [de

Electronic Petitions and Institutional Modernization. International Parliamentary E-Petition Systems in Comparative Perspective

Directory of Open Access Journals (Sweden)

Ralf Lindner

2009-09-01

Full Text Available Since 2000, a number of parliaments and governments have introduced electronic petitions systems (e-petitions. Compared to most other means of e-participation made available by public institutions, e-petitions have moved beyond the experimental stage and are characterized by a high level of institutionalization and procedural maturity. Hence, the field of e-petitioning is particularly promising if the relationship between public institutions and Internet-based participation channels is to be better understood. Based on empirical data generated in the research project "Public electronic petitions and civic involvement" conducted on behalf of the German Bundestag, the article undertakes an analysis of the e-petition systems of the Scottish Parliament, the Parliament of Queensland, the Bundestag and the Norwegian Municipalities in comparative perspective. Apart from presenting the systems’ main technical and procedural features and selected user statistics, the article attempts to explain the high attractiveness of e-petitions for parliaments and governments.

Quality and reliability assurance of electronic components in small-scale and middle-sized plants

International Nuclear Information System (INIS)

Becker, P.

1982-01-01

Electronic components are forever finding their way into new fields of application and have an ever increasing influence on the quality and reliability of the products in which they are used. The user has very negligible influence on the production methods used for the manufacture of the components and the element properties. (orig.) [de

Separation of electron ion ring components (computational simulation and experimental results)

International Nuclear Information System (INIS)

Aleksandrov, V.S.; Dolbilov, G.V.; Kazarinov, N.Yu.; Mironov, V.I.; Novikov, V.G.; Perel'shtejn, Eh.A.; Sarantsev, V.P.; Shevtsov, V.F.

1978-01-01

The problems of the available polarization value of electron-ion rings in the regime of acceleration and separation of its components at the final stage of acceleration are studied. The results of computational simulation by use of the macroparticle method and experiments on the ring acceleration and separation are given. The comparison of calculation results with experiment is presented

Nuclear electronic components of surface contamination monitor based on multi-electrode proportional counter

International Nuclear Information System (INIS)

Du Xiangyang; Zhang Yong; Han Shuping; Rao Xianming; Fang Jintu

2001-01-01

The nuclear electronic components applying in Portal Monitor and Hands and Feet Surface Contamination Monitor were based on modern integrated circuit are introduced. The detailed points in circuit design and manufacturing technique are analyzed

Solutions to mitigate heat loads due to electrons on sensitive components of ITER HNB beamlines

Energy Technology Data Exchange (ETDEWEB)

Sartori, Emanuele, E-mail: emanuele.sartori@gmail.com [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), C.so Stati Uniti 4, 35127 Padova (Italy); Veltri, Pierluigi; Dalla Palma, Mauro; Agostinetti, Piero [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), C.so Stati Uniti 4, 35127 Padova (Italy); Hemsworth, Ronald; Singh, Mahendrajit [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France); Serianni, Gianluigi [Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), C.so Stati Uniti 4, 35127 Padova (Italy)

2016-11-01

Highlights: • Energetic electrons leaking out of the ITER HNB accelerator are simulated. • Electrons generated along the ITER HNB beamline are simulated. • Heat loads and heat load maps on cryopumps are calculated for ITER HNB and test facility. • Protection solutions that will be installed are presented and their effect discussed. - Abstract: The operation of neutral beam injectors for plasma heating and current drive in a fusion device provides challenges in the thermal management of beamline components. Sensitive components such as the cryogenic pumps at beamline periphery shall be protected from the heat flux due to stray electrons. These are emitted by the negative ion accelerator or generated along the beamline by interaction of fast electrons, ions or atoms with background gas and surfaces. In this article the case of the ITER Heating Neutral Beam (HNB) and its test facility MITICA is discussed, for which the beam parameters and the required pulse length of one hour is a major leap forward with respect to the present experience with neutral beam systems. The engineering solutions adopted for effective cryopump protection against the heat load from electrons are described. The use of three-dimensional numerical simulations of particle trajectories in the complex geometry of the beamline was needed for the quantitative estimations of the heat loads. The presented solutions were optimized to minimize the impact on gas pumping and on the functionality of other components.

Optically stimulated luminescence of electronic components for forensic, retrospective, and accident dosimetry

International Nuclear Information System (INIS)

Inrig, E.L.; Godfrey-Smith, D.I.; Khanna, S.

2008-01-01

This study investigated the optically stimulated luminescence (OSL) response of electronic components found within portable electronic devices such as cell phones and pagers, portable computers, music and video players, global positioning system receivers, cameras, and digital watches. The analysis of components extracted from these ubiquitous devices was proposed for applications ranging from rapid accident dose reconstruction to the tracking and attribution of gamma-emitting radiological materials. Surface-mount resistors with alumina porcelain substrates consistently produced OSL following irradiation, with minimum detectable doses on the order of 10 mGy for a typical sample. Since the resistor ceramics were found to exhibit anomalous fading, dose reconstruction procedures were developed to correct for this using laboratory measurements of fading rates carried out over approximately 3 months. Two trials were conducted in which cellular phones were affixed to an anthropomorphic phantom and irradiated using gamma-ray sources; ultimately, analysis of the devices used in these trials succeeded in reconstructing doses in the range of 0.1-0.6Gy

Electronic repository as а constituent of informative educational space of institutes of higher of culture and sport

Directory of Open Access Journals (Sweden)

Iryna Svistel’nik

2015-06-01

Full Text Available Purpose: to consider forming and presentation of electronic educational resources on the sites of institutes of higher of physical culture and sport of Ukraine for the informative providing of educational process and scientific researches. Material and Methods: electronic educational methodical materials of departments are analysed on sites of higher physical culture and sport of Ukraine for the opened access students, magistrate. Results: viewing of web pages of libraries of institutes of higher of physical culture and sport of Ukraine allowed to set that majority from them is not formed by electronic collections of educational resources and does not give their remote users. Conclusions: the institutes of higher of physical culture and sport must realize the row of innovations for a grant educational information in the opened access; to modify informative activity in accordance with modern requirements, to initiate and offer new modern informative services for the proper informative providing of education and science in type educational establishments, and also distribution of results of scientific researches.

Design and implementation of an inpatient physician documentation system using off-the-shelf components.

Science.gov (United States)

Cucina, Russell J; Bokser, Seth J; Carter, Jonathan T; McLaren, Kevin M; Blum, Michael S

2007-10-11

We report the development and implementation of an electronic inpatient physician documentation system using off-the-shelf components, rapidly and at low cost. Within 9 months of deployment, over half of physician notes were electronic, and within 20 months, paper physician notes were eliminated. Our results suggest institutions can prioritize conversion to inpatient electronic physician documentation without waiting for development of sophisticated software packages or large capital investments.

Assessing Readiness for Integration of Electronic Learning into Business Education Programmes in Tertiary Institutions in Ebonyi State

Science.gov (United States)

Nwagwu, Lazarus; Azih, Nonye

2015-01-01

The study was conducted to assess readiness for integration of electronic learning into business education programmes in tertiary institutions in Ebonyi State. Two research questions and two hypotheses guided the study. The population was 37 business education lecturers and 748 Business Education Students in tertiary institutions that offer…

Microsupercapacitors as miniaturized energy-storage components for on-chip electronics

Science.gov (United States)

Kyeremateng, Nana Amponsah; Brousse, Thierry; Pech, David

2017-01-01

The push towards miniaturized electronics calls for the development of miniaturized energy-storage components that can enable sustained, autonomous operation of electronic devices for applications such as wearable gadgets and wireless sensor networks. Microsupercapacitors have been targeted as a viable route for this purpose, because, though storing less energy than microbatteries, they can be charged and discharged much more rapidly and have an almost unlimited lifetime. In this Review, we discuss the progress and the prospects of integrated miniaturized supercapacitors. In particular, we discuss their power performances and emphasize the need of a three-dimensional design to boost their energy-storage capacity. This is obtainable, for example, through self-supported nanostructured electrodes. We also critically evaluate the performance metrics currently used in the literature to characterize microsupercapacitors and offer general guidelines to benchmark performances towards prospective applications.

Assessment of electronic component failure rates on the basis of experimental data

International Nuclear Information System (INIS)

Nitsch, R.

1991-01-01

Assessment and prediction of failure rates of electronic systems are made using experimental data derived from laboratory-scale tests or from the practice, as for instance from component failure rate statistics or component repair statistics. Some problems and uncertainties encountered in an evaluation of such field data are discussed in the paper. In order to establish a sound basis for comparative assessment of data from various sources, the items of comparison and the procedure in case of doubt have to be defined. The paper explains two standard methods proposed for practical failure rate definition. (orig.) [de

77 FR 20847 - Certain Mobile Electronic Devices Incorporating Haptics; Institution of Investigation Pursuant to...

Science.gov (United States)

2012-04-06

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-834] Certain Mobile Electronic Devices Incorporating Haptics; Institution of Investigation Pursuant to 19 U.S.C. 1337 AGENCY: U.S. International Trade.... International Trade Commission on February 7, 2012, and an amended complaint was filed with the U.S...

Monitoring the Opinions of Parents of College Students as a Component of the Institution's In-House Education Quality Management System

Science.gov (United States)

Briukhanov, V. M.; Kiselev, V. I.; Timchenko, N. S.; Vdovin, V. M.

2010-01-01

The intensive process observed in the past few years, in which higher professional education is coming to be included in the system of market relations, is setting new target guidelines of the activity of institutions of higher learning, as well as the management models of educational institutions. The marketing component is becoming more and more…

Electron/electron acoustic instability

International Nuclear Information System (INIS)

Gary, S.P.

1987-01-01

The electron acoustic wave becomes a normal mode of an unmagnetized collisionless plasma in the presence of two electron components with similar densities, but strongly disparate temperatures. The characteristic frequency of this mode is the plasma frequency of the cooler electron component. If these two electron components have a relative drift speed several times the thermal speed of the cooler component, the electron/electron acoustic instability may arise. This paper describes the parametric dependences of the threshold drift speed and maximum growth rate of this instability, and compares these with the same properties of the electron/ion acoustic instability. Under the condition of zero current, the electron/ion acoustic instability typically has the lower threshold drift speed, so that observation of the electron/electron acoustic instability is a strong indication of the presence of an electrical current in the plasma

Investigation of Heat Sink Efficiency for Electronic Component Cooling Applications

DEFF Research Database (Denmark)

Staliulionis, Ž.; Zhang, Zhe; Pittini, Riccardo

2014-01-01

Research and optimisation of cooling of electronic components using heat sinks becomes increasingly important in modern industry. Numerical methods with experimental real-world verification are the main tools to evaluate efficiency of heat sinks or heat sink systems. Here the investigation...... of relatively simple heat sink application is performed using modeling based on finite element method, and also the potential of such analysis was demonstrated by real-world measurements and comparing obtained results. Thermal modeling was accomplished using finite element analysis software COMSOL and thermo...

Experimental comparison between different configurations of PCM based heat sinks for cooling electronic components

International Nuclear Information System (INIS)

Gharbi, Salma; Harmand, Souad; Jabrallah, Sadok Ben

2015-01-01

The thermal control of electronic components is aimed at ensuring their use in a temperature range compatible with their performances. This paper presents an experimental study of the behavior of phase change materials (PCMs) as the cooling system for electronic devices. Four configurations are used to control the increase in the system temperature: pure PCM, PCM in a silicone matrix, PCM in a graphite matrix and pure PCM in a system of fins. Thermo-physical properties of different PCMs are determined and found to be desirable for application in this study. Solid liquid interface visualization and temperature evolution are employed to understand the mechanism of heat transfer during the different stages. Results indicated that the inclusion of PCM can lower component increase temperature and extends twice the critical time of the heat sink. The use of Graphite matrix filled by PCM showed more improvement on system thermal performance than silicon matrix. Also, for the same fraction of copper, it was found that incorporating long copper fins with suitable spacing into PCM, can enhance heat distribution into PCM leading to longer remain component temperature below the critical limit. This work therefore shows that the combination of PCM and long, well-spaced fins presents an effective means for thermal control of electronic devices. - Highlights: • Study on thermal performance of different PCM based heat sink in electronic cooling. • Examination of heat transfer mechanism into heat sink for different conditions. • Graphite matrix shows more efficiency than silicon. • Inclusion PCM can reduce temperature increasing. • Heat sink with longer well spaced fins can extend longer the critical time

Electronic zero-point fluctuation forces inside circuit components

Science.gov (United States)

Leonhardt, Ulf

2018-01-01

One of the most intriguing manifestations of quantum zero-point fluctuations are the van der Waals and Casimir forces, often associated with vacuum fluctuations of the electromagnetic field. We study generalized fluctuation potentials acting on internal degrees of freedom of components in electrical circuits. These electronic Casimir-like potentials are induced by the zero-point current fluctuations of any general conductive circuit. For realistic examples of an electromechanical capacitor and a superconducting qubit, our results reveal the possibility of tunable forces between the capacitor plates, or the level shifts of the qubit, respectively. Our analysis suggests an alternative route toward the exploration of Casimir-like fluctuation potentials, namely, by characterizing and measuring them as a function of parameters of the environment. These tunable potentials may be useful for future nanoelectromechanical and quantum technologies. PMID:29719863

Electronic zero-point fluctuation forces inside circuit components.

Science.gov (United States)

Shahmoon, Ephraim; Leonhardt, Ulf

2018-04-01

One of the most intriguing manifestations of quantum zero-point fluctuations are the van der Waals and Casimir forces, often associated with vacuum fluctuations of the electromagnetic field. We study generalized fluctuation potentials acting on internal degrees of freedom of components in electrical circuits. These electronic Casimir-like potentials are induced by the zero-point current fluctuations of any general conductive circuit. For realistic examples of an electromechanical capacitor and a superconducting qubit, our results reveal the possibility of tunable forces between the capacitor plates, or the level shifts of the qubit, respectively. Our analysis suggests an alternative route toward the exploration of Casimir-like fluctuation potentials, namely, by characterizing and measuring them as a function of parameters of the environment. These tunable potentials may be useful for future nanoelectromechanical and quantum technologies.

Study of the survival of the electronic components of the EAR 650 (ILOK 1) aerosol activity monitors

International Nuclear Information System (INIS)

Morisset, Aurele; Sciorella, Guy; Meriaux, Pierre; Pagel, Marcel; Simiand, Stephane

1977-04-01

This study, based on operational results obtained on instruments used in different centres of the CEA, allows the evaluation of means and methods to be used for the survival of the electronic components of this equipment. The number of components necessary for assuring the maintenance of these equipments, and in particular the specification of replacement components for those components, which are no more manufactured, are given [fr

77 FR 24514 - Certain Consumer Electronics, Including Mobile Phones and Tablets; Institution of Investigation...

Science.gov (United States)

2012-04-24

..., Including Mobile Phones and Tablets; Institution of Investigation Pursuant to 19 U.S.C. 1337 AGENCY: U.S... mobile phones and tablets, by reason of infringement of certain claims of U.S. Patent No. 5,854,893... after importation of certain consumer electronics, including mobile phones and tablets, that infringe...

NATO Advanced Study Institute on Lower-Dimensional Systems and Molecular Electronics

CERN Document Server

Day, Peter; Papavassiliou, George

1990-01-01

This volume represents the written account of the NATO Advanced Study Institute "Lower-Dimensional Systems and Molecular Electronics" held at Hotel Spetses, Spetses Island, Greece from 12 June to 23 June 1989. The goal of the Institute was to demonstrate the breadth of chemical and physical knowledge that has been acquired in the last 20 years in inorganic and organic crystals, polymers, and thin films, which exhibit phenomena of reduced dimensionality. The interest in these systems started in the late 1960's with lower-dimensional inorganic conductors, in the early 1970's with quasi-one-dimensional crystalline organic conductors. which by 1979 led to the first organic superconductors, and, in 1977, to the fITSt conducting polymers. The study of monolayer films (Langmuir-Blodgett films) had progressed since the 1930's, but reached a great upsurge in . the early 1980's. The pursuit of non-linear optical phenomena became increasingly popular in the early 1980's, as the attention turned from inorganic crystals t...

Other components

International Nuclear Information System (INIS)

Anon.

1993-01-01

This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

Experimental and numerical investigation of heat dissipation from an electronic component in a closed enclosure

Directory of Open Access Journals (Sweden)

George Bobin Saji

2018-01-01

Full Text Available Intensifying electronic component power dissipation levels, shortening product design cycle times, and greater than before requirement for more compact and reliable electronic systems with greater functionality, has heightened the need for thermal design tools that enable accurate solutions to be generated and quickly assessed. The present numerical study aims at developing a computational tool in OpenFOAM that can predict the heat dissipation rate and temperature profile of any electronic component in operation. A suitable computational domain with defined aspect ratio is chosen. For analyzing, “buoyant Boussinesq Simple Foam“ solver available with OpenFOAM is used. It was modified for adapting to the investigation with specified initial and boundary conditions. The experimental setup was made with the dimensions taken up for numerical study. Thermocouples were calibrated and placed in specified locations. For different heat input, the temperatures are noted down at steady state and compared with results from the numerical study.

Effects of radiations on electronic components - Course IN2P3, release 6

International Nuclear Information System (INIS)

2007-01-01

As many off-the-shelf electronic components are now present onboard satellites, launchers and planes, this course proposes an overview of effects radiations can have on these components, notably in space applications. A first part proposes an overview of radiative environments, and more particularly presents the space radiative environment (solar wind, solar flares, cosmic radiation, radiation belts). It also presents the atmospheric and Earth radiative environment due to cosmic radiation, the alpha radiation (origin of particles, particle flow), the radiative environment within an accelerator. The second part addresses the effects of these radiative environments on electronic components, and the associated standards and tests. It addresses cumulative effects and proposes a detailed analysis of the effects of an ionizing dose on a MOS transistor, an analysis of the effects of ionising dose rate on a bipolar NPN or PNP vertical or lateral transistor, an analysis of the effects of atomic displacements, and a discussion of structure modifications. The next part describes various single events: the Single Event Upset (SEU) and the Multiple Bit Upset (MBU) in the case of a SRAM, the SEL (Single Event Latch-up) phenomenon, the SEGR (Single Event Gate Rupture) phenomenon in the case of a Power MOSFET, and the SEB (Single Event Burnout) phenomenon in the case of a Power MOSFET

An empirical analysis on the adoption of electronic banking in the financial institutes using structural, behavioral and contextual factors

Directory of Open Access Journals (Sweden)

Ali Akbar Ahmadi

2012-08-01

Full Text Available This research examines contextual, structural and organizational factors, which can facilitate or slow down adoption of innovation in Electronic Banking in the financial Institutions. Three-dimensional model co-structure, co-behavioral, contextual (3C is used in this research. This schema is a logical model in the categories of models and many of concepts, events and organizational phenomena can be examined. Structural factors including type of the organization of institution, work distribution, preparing mobilization of resources and equipment and risk of decision-making sophistication influence on adoption of Electronic Banking. There are four contextual factors, which contribute in adoption of Electronic Banking including goals, strategies, culture and common norms. The five Behavioral Factors, which affect on electronic banking are connections and relations, skills and personal characters of employees, education, job satisfaction and banking work process. By studying the mentioned factors, we have realized that contextual factors plays important role on adoption of electronic Banking by employee and the behavioral and structural factors have minor impacts. The mentioned proposals are methods, which facilitate the adoption of electronic banking in the country.

Measurements of the ballistic-phonon component resulting from nuclear and electron recoils in crystalline silicon

International Nuclear Information System (INIS)

Lee, A.T.; Cabrera, B.; Dougherty, B.L.; Penn, M.J.; Pronko, J.G.; Tamura, S.

1996-01-01

We present measurements of the ballistic-phonon component resulting from nuclear and electron recoils in silicon at ∼380 mK. The detectors used for these experiments consist of a 300-μm-thick monocrystal of silicon instrumented with superconducting titanium transition-edge sensors. These sensors detect the initial wavefront of athermal phonons and give a pulse height that is sensitive to changes in surface-energy density resulting from the focusing of ballistic phonons. Nuclear recoils were generated by neutron bombardment of the detector. A Van de Graaff proton accelerator and a thick 7 Li target were used. Pulse-height spectra were compared for neutron, x-ray, and γ-ray events. A previous analysis of this data set found evidence for an increase in the ballistic-phonon component for nuclear recoils compared to electron recoils at a 95% confidence level. An improved understanding of the detector response has led to a change in the result. In the present analysis, the data are consistent with no increase at the 68% confidence level. This change stems from an increase in the uncertainty of the result rather than a significant change in the central value. The increase in ballistic phonon energy for nuclear recoils compared to electron recoils as a fraction of the total phonon energy (for equal total phonon energy events) was found to be 0.024 +0.041 -0.055 (68% confidence level). This result sets a limit of 11.6% (95% confidence level) on the ballistic phonon enhancement for nuclear recoils predicted by open-quote open-quote hot spot close-quote close-quote and electron-hole droplet models, which is the most stringent to date. To measure the ballistic-phonon component resulting from electron recoils, the pulse height as a function of event depth was compared to that of phonon simulations. (Abstract Truncated)

77 FR 68828 - Certain Cases for Portable Electronic Devices; Institution of Investigation Pursuant to the...

Science.gov (United States)

2012-11-16

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-861] Certain Cases for Portable Electronic Devices; Institution of Investigation Pursuant to the Tariff Act of 1930, as Amended AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint was filed with...

The new generations of power components will depend on neutron and/or electron bombardment techniques

International Nuclear Information System (INIS)

Lilen, H.

1976-01-01

Neutron and electron bombardment techniques for materials doping, newly introduced in the fabrication of power semiconductor components: diodes, transistors, thyristors, and triacs are briefly outlined. A neutron bombardment of high purity silicon results in a short-lived 31 Si isotope (from 30 Si) decaying into 31 P. The phosphorus with its five peripheral electrons induces a negative doping (N), and the neutron technique gives a homogeneous doping. Furthermore, silicon bombardment with 1 to 2MeV electrons induces micro-ruptures in the lattice, that act as recombination traps reducing carrier lifetimes. Consequently, gold diffusion techniques can be replaced by electron bombardment with a gain in controlling carrier lifetimes [fr

NATO Advanced Study Institute on Relativistic and Electron Correlation Effects in Molecules and Solids

CERN Document Server

1994-01-01

The NATO Advanced Study Institute (ASI) on "R@lativistic and Electron Correlation Effects in Molecules and Solids", co-sponsored by Simon Fraser University (SFU) and the Natural Sciences and Engineering Research Council of Canada (NSERC) was held Aug 10- 21, 1992 at the University of British Columbia (UBC), Vancouver, Canada. A total of 90 lecturers and students with backgrounds in Chemistry, Physics, Mathematics and various interdisciplinary subjects attended the ASI. In my proposal submitted to NATO for financial support for this ASI, I pointed out that a NATO ASI on the effects of relativity in many-electron systems was held ten years ago, [See G.L. Malli, (ed) Relativistic Effects in Atoms, Molecules and Solids, Plenum Press, Vol B87, New York, 1983]. Moreover, at a NATO Advanced Research Workshop (ARW) on advanced methods for molecular electronic structure "an assessment of state-of­ the-art of Electron Correlation ... " was carried out [see C.E. Dykstra, (ed), Advanced Theories and Computational Approa...

CER Hub: An informatics platform for conducting comparative effectiveness research using multi-institutional, heterogeneous, electronic clinical data.

Science.gov (United States)

Hazlehurst, Brian L; Kurtz, Stephen E; Masica, Andrew; Stevens, Victor J; McBurnie, Mary Ann; Puro, Jon E; Vijayadeva, Vinutha; Au, David H; Brannon, Elissa D; Sittig, Dean F

2015-10-01

Comparative effectiveness research (CER) requires the capture and analysis of data from disparate sources, often from a variety of institutions with diverse electronic health record (EHR) implementations. In this paper we describe the CER Hub, a web-based informatics platform for developing and conducting research studies that combine comprehensive electronic clinical data from multiple health care organizations. The CER Hub platform implements a data processing pipeline that employs informatics standards for data representation and web-based tools for developing study-specific data processing applications, providing standardized access to the patient-centric electronic health record (EHR) across organizations. The CER Hub is being used to conduct two CER studies utilizing data from six geographically distributed and demographically diverse health systems. These foundational studies address the effectiveness of medications for controlling asthma and the effectiveness of smoking cessation services delivered in primary care. The CER Hub includes four key capabilities: the ability to process and analyze both free-text and coded clinical data in the EHR; a data processing environment supported by distributed data and study governance processes; a clinical data-interchange format for facilitating standardized extraction of clinical data from EHRs; and a library of shareable clinical data processing applications. CER requires coordinated and scalable methods for extracting, aggregating, and analyzing complex, multi-institutional clinical data. By offering a range of informatics tools integrated into a framework for conducting studies using EHR data, the CER Hub provides a solution to the challenges of multi-institutional research using electronic medical record data. Copyright © 2015. Published by Elsevier Ireland Ltd.

Long-term effects as the cause of failure in electronic components

International Nuclear Information System (INIS)

Renz, H.; Kreichgauer, H.

1989-01-01

After a brief presentation of the utilisation properties of electronic components, their failure rates are discussed with particular reference to the socalled bath-tub curve. The main emphasis is on the construction and manufacture of integrated circuits and the possible types and causes of failure arising from the individual manufacturing stages (layout faults, internal corrosion, masking and etching errors, leakage currents, inadequate heat removal, etc.). A technical insurance assessment is then provided of the long-term failures associated with technological matters. (orig.) [de

GfW-handbook for data compilation of irradiation tested electronic components

International Nuclear Information System (INIS)

Wulf, F.; Braeunig, D.; Gaebler, W.

1981-06-01

The present 2. edition of the Data Compilation of Irradiation Tested Electronic Components represents a continuation of the 1. edition and is published as a loose-leaf handbook. In addition to the 190 reports provided in the 1. issue the present handbook contains further 44 test reports of currently used semiconductor devices in a comprehensive but easily to handle graphical and tabular presentation. Statistical values are given in order to facilitate the parts life time evaluation in a radiative environment. (orig.) [de

76 FR 60870 - In the Matter of Certain Electronic Devices With Communication Capabilities, Components Thereof...

Science.gov (United States)

2011-09-30

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-808] In the Matter of Certain Electronic Devices... Investigation; Institution of Investigation Pursuant to 19 U.S.C. 1337 AGENCY: U.S. International Trade.... International Trade Commission on August 16, 2011, under section 337 of the Tariff Act of 1930, as amended, 19 U...

Physical activity in relation to selected physical health components in employees of a financial institution

OpenAIRE

Smit, Madelein; Wilders, Cilas J.; Moss, S.J.

2013-01-01

The aim of this study was to determine the relation between physical activity and selected physical health components. A total of 9860 employees of a financial institution in South Africa, between the ages 18 and 64 (x̄ =35.3 ± 18.6 years), voluntary participated in the study. Health risk factors and physical activity was determined by using the Health Risk Assessment (HRA) and Monitored Health Risk (MHM). Assessment included a physical activity, diabetes risk and cardiovascular risk question...

Management status of end-of-life vehicles and development strategies of used automotive electronic control components recycling industry in China.

Science.gov (United States)

Wang, Junjun; Chen, Ming

2012-11-01

Recycling companies play a leading role in the system of end-of-life vehicles (ELVs) in China. Automotive manufacturers in China are rarely involved in recycling ELVs, and they seldom provide dismantling information for recycling companies. In addition, no professional shredding plant is available. The used automotive electronic control components recycling industry in China has yet to take shape because of the lack of supporting technology and profitable models. Given the rapid growth of the vehicle population and electronic control units in automotives in China, the used automotive electronic control components recycling industry requires immediate development. This paper analyses the current recycling system of ELVs in China and introduces the automotive product recycling technology roadmap as well as the recycling industry development goals. The strengths, weaknesses, opportunities and challenges of the current used automotive electronic control components recycling industry in China are analysed comprehensively based on the 'strengths, weaknesses, opportunities and threats' (SWOT) method. The results of the analysis indicate that this recycling industry responds well to all the factors and has good opportunities for development. Based on the analysis, new development strategies for the used automotive electronic control components recycling industry in accordance with the actual conditions of China are presented.

Radiation and temperature effects on electronic components investigated under the CSTI high capacity power project

International Nuclear Information System (INIS)

Schwarze, G.E.; Niedra, J.M.; Frasca, A.J.; Wieserman, W.R.

1993-01-01

The effects of nuclear radiation and high temperature environments must be fully known and understood for the electronic components and materials used in both the Power Conditioning and Control subsystem and the reactor Instrumentation and Control subsystem of future high capacity nuclear space power systems. This knowledge is required by the designer of these subsystems in order to develop highly reliable, long-life power systems for future NASA missions. A review and summary of the experimental results obtained for the electronic components and materials investigated under the power management element of the CSTI high capacity power project will be presented in this paper: (1) Neutron, gamma ray, and temperature effects on power semiconductor switches, (2) Temperature and frequency effects on soft magnetic materials; and (3) Temperature effects on rare-earth permanent magnets

Radiation and temperature effects on electronic components investigated under the CSTI High Capacity Power Project

International Nuclear Information System (INIS)

Shwarze, G.E.; Wieserman, W.R.

1994-01-01

The effects of nuclear radiation and high temperature environments must be fully known and understood for the electronic components and materials used in both the Power Conditioning and Control subsystem and the reactor Instrumentation and Control subsystem of future high capacity nuclear space power systems. This knowledge is required by the designer of these subsystems in order to develop highly reliable, long-life power systems for future NASA missions. A review and summary of the experimental results obtained for the electronic components and materials investigated under the power management element of the CSTI high capacity power project will be presented in this paper: (1) Neutron, gamma ray, and temperature effects on power semiconductor switches, (2) Temperature and frequency effects on soft magnetic materials; and (3) Temperature effects on rare earth permanent magnets

The NASA Electronic Parts and Packaging (NEPP) Program - Presentation to Korean Aerospace Research Institute

Science.gov (United States)

LaBel, Kenneth A.; Sampson, Michael J.

2016-01-01

This presentation will provide basic information about NASA's Electronic Parts and Packaging Program (NEPP), for sharing with representatives of the South Korean Aerospace Research Institute (KARI) as part of a larger presentation by Headquarters Office of Safety and Mission Assurance. The NEPP information includes mission and goals, history of the program, basic focus areas, strategies, deliverables and some examples of current tasks.

Electron beam facilities and technologies developed in the Institute of Nuclear Chemistry and Technology

International Nuclear Information System (INIS)

Chmielewski, A.G.; Walis, L.; Zimek, Z.

1992-01-01

The operation of the first electron accelerator has been started at Institute /former Institute for Nuclear Research/ in 1971. This LAE-13/9 accelerator is a two-section lineac with adjustable energy of electrons: 5 to 13 MeV and the beam power up to 9 kW. The main technologies developed on the basis of LAE-13/9 are: sterilization, manufacturing of thermoshrinkable materials and modification of semiconductors. The accelerator is operated 4000 hours per year and used for small scale production and services in these fields. The other problems investigated in laboratory scale are: food preservation and hygenization, hygenization of municipal sewage sludge, and bio-conversion of pig-farm wastes into animal fodder. The laboratory experiments are basis for pilot construction and other industrial applications. The mentioned technology of thermoshrinkable tube production was implemented in industrial scale at ZWUT Czluchow which factory is equipped in the accelerator ILU-6 /20 kW, 2 MeV/. On the basis of similar unit a technological installation was built at Institute. The plant is furnished with a conveyer and the rewinding machines for tubes and tapes manufacturing. This allows continuous production of these materials. The plant will start operation next year and linear accelerator /10 MeV, 15 kW/ for this purpose is already delivered. The pilot plant for food preservation and hygenization has been built. It is equipped in small pilot accelerator 10 MeV, 1 kW and will be furnished with 10 MeV, 10 kW lineac this year. Beside of this technological lines Institute is furnished in Van de Graff accelerator /2, MeV, 100 μA/ and another laboratory unit LAE-10 /10 MeV, 10-100 ns 2 us/ is under construction. (J.P.N.)

Electrical constraints on electronic components: syntheses of the ETTC'97 and RADECS 97 congress activities

International Nuclear Information System (INIS)

Carel, Ch.

1998-01-01

The electromagnetic compatibility (EMC) of systems and their hardening against electromagnetic (IEMN, lightning, strong radio and radar fields..) and radiative environments impose severe manufacturing constraints in competition with other functional constraints, like thermal constraints and weight, and operational constraints (maintenance, availability). This paper is a summary of the main topics discussed during the ETTC and RADECS 1997 congresses. The outstanding facts concern: the non-disturbance of components (hyper-frequency EMC and high fields), the non-destruction of components (hardening against electromagnetic pulses), the civil domain, the numerical simulations, the integrity of electronic card signals, and the reliability of components. (J.S.)

A computer-controlled electronic system for the ultrasonic NDT of components for nuclear power stations

International Nuclear Information System (INIS)

Rehrmann, M.; Harbecke, D.

1987-01-01

The paper describes an automatic ultrasonic testing system combined with a computer-controlled electronics system, called IMPULS I, for the non-destructive testing of components of nuclear reactors. The system can be used for both in-service inspection and for inspection during the manufacturing process. IMPUL I has more functions and less components than conventional ultrasonic systems, and the system gives good reproducible test results and is easy to operate. (U.K.)

77 FR 11588 - Certain Electronic Devices for Capturing and Transmitting Images, and Components Thereof

Science.gov (United States)

2012-02-27

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-831] Certain Electronic Devices for Capturing and Transmitting Images, and Components Thereof AGENCY: U.S. International Trade Commission... Trade Commission on January 10, 2012, under section 337 of the Tariff Act of 1930, as amended, 19 U.S.C...

Research on fault characteristics about switching component failures for distribution electronic power transformers

Science.gov (United States)

Sang, Z. X.; Huang, J. Q.; Yan, J.; Du, Z.; Xu, Q. S.; Lei, H.; Zhou, S. X.; Wang, S. C.

2017-11-01

The protection is an essential part for power device, especially for those in power grid, as the failure may cost great losses to the society. A study on the voltage and current abnormality in the power electronic devices in Distribution Electronic Power Transformer (D-EPT) during the failures on switching components is presented, as well as the operational principles for 10 kV rectifier, 10 kV/400 V DC-DC converter and 400 V inverter in D-EPT. Derived from the discussion on the effects of voltage and current distortion, the fault characteristics as well as a fault diagnosis method for D-EPT are introduced.

Technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

Science.gov (United States)

Wegrzecka, Iwona; Panas, Andrzej; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kozłowski, Roman; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecki, Maciej; Zaborowski, Michał

2013-07-01

The paper discusses the technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE). The developed technology enables the fabrication of both planar and epiplanar p+-ν-n+ detector structures with an active area of up to 50 cm2. The starting material for epiplanar structures are silicon wafers with a high-resistivity n-type epitaxial layer ( ν layer - ρ < 3 kΩcm) deposited on a highly doped n+-type substrate (ρ< 0,02Ωcm) developed and fabricated at the Institute of Electronic Materials Technology. Active layer thickness of the epiplanar detectors (νlayer) may range from 10 μm to 150 μm. Imported silicon with min. 5 kΩcm resistivity is used to fabricate planar detectors. Active layer thickness of the planar detectors (ν) layer) may range from 200 μm to 1 mm. This technology enables the fabrication of both discrete and multi-junction detectors (monolithic detector arrays), such as single-sided strip detectors (epiplanar and planar) and double-sided strip detectors (planar). Examples of process diagrams for fabrication of the epiplanar and planar detectors are presented in the paper, and selected technological processes are discussed.

The influence of institutional pressures on hospital electronic health record presence.

Science.gov (United States)

Fareed, Naleef; Bazzoli, Gloria J; Farnsworth Mick, Stephen S; Harless, David W

2015-05-01

Electronic health records (EHR) are a promising form of health information technology that could help US hospitals improve on their quality of care and costs. During the study period explored (2005-2009), high expectations for EHR diffused across institutional stakeholders in the healthcare environment, which may have pressured hospitals to have EHR capabilities even in the presence of weak technical rationale for the technology. Using an extensive set of organizational theory-specific predictors, this study explored whether five factors - cause, constituents, content, context, and control - that reflect the nature of institutional pressures for EHR capabilities motivated hospitals to comply with these pressures. Using information from several national data bases, an ordered probit regression model was estimated. The resulting predicted probabilities of EHR capabilities from the empirical model's estimates were used to test the study's five hypotheses, of which three were supported. When the underlying cause, dependence on constituents, or influence of control were high and potential countervailing forces were low, hospitals were more likely to employ strategic responses that were compliant with the institutional pressures for EHR capabilities. In light of these pressures, hospitals may have acquiesced, by having comprehensive EHR capabilities, or compromised, by having intermediate EHR capabilities, in order to maintain legitimacy in their environment. The study underscores the importance of our assessment for theory and policy development, and provides suggestions for future research. Copyright © 2015 Elsevier Ltd. All rights reserved.

78 FR 63492 - Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof...

Science.gov (United States)

2013-10-24

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-847] Certain Electronic Devices, Including Mobile Phones and Tablet Computers, and Components Thereof; Notice of Request for Statements on the Public Interest AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is...

IEEE [Institute of Electrical and Electronics Engineers] standards and nuclear software quality engineering

International Nuclear Information System (INIS)

Daughtrey, T.

1988-01-01

Significant new nuclear-specific software standards have recently been adopted under the sponsorship of the American Nuclear Society and the American Society of Mechanical Engineers. The interest of the US Nuclear Regulatory Commission has also been expressed through their issuance of NUREG/CR-4640. These efforts all indicate a growing awareness of the need for thorough, referenceable expressions of the way to build in and evaluate quality in nuclear software. A broader professional perspective can be seen in the growing number of software engineering standards sponsored by the Institute of Electrical and Electronics Engineers (IEEE) Computer Society. This family of standards represents a systematic effort to capture professional consensus on quality practices throughout the software development life cycle. The only omission-the implementation phase-is treated by accepted American National Standards Institute or de facto standards for programming languages

Quantum-mechanical predictions of electron-induced ionization cross sections of DNA components

International Nuclear Information System (INIS)

Champion, Christophe

2013-01-01

Ionization of biomolecules remains still today rarely investigated on both the experimental and the theoretical sides. In this context, the present work appears as one of the first quantum mechanical approaches providing a multi-differential description of the electron-induced ionization process of the main DNA components for impact energies ranging from the target ionization threshold up to about 10 keV. The cross section calculations are here performed within the 1st Born approximation framework in which the ejected electron is described by a Coulomb wave whereas the incident and the scattered electrons are both described by a plane wave. The biological targets of interest, namely, the DNA nucleobases and the sugar-phosphate backbone, are here described by means of the GAUSSIAN 09 system using the restricted Hartree-Fock method with geometry optimization. The theoretical predictions also obtained have shown a reasonable agreement with the experimental total ionization cross sections while huge discrepancies have been pointed out with existing theoretical models, mainly developed within a semi-classical framework.

75 FR 38118 - In the Matter of Certain Electronic Devices With Image Processing Systems, Components Thereof...

Science.gov (United States)

2010-07-01

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-724] In the Matter of Certain Electronic Devices... AGENCY: U.S. International Trade Commission. ACTION: Institution of investigation pursuant to 19 U.S.C. 1337. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade...

ORGANIZATIONAL AND PEDAGOGICAL BASIS OF THE INTRODUCTION OF ELECTRONIC DOCUMENT MANAGEMENT IN RESEARCH INSTITUTIONS

Directory of Open Access Journals (Sweden)

Serhiy M. Tukalo

2013-10-01

Full Text Available This paper is devoted to the implementation of electronic document management (EDM in research institutions as a part of the e-government in Ukraine. Process of EDM implementation in state institutions is analysed. Two aspects of EDM implementation are emphasized: EDM implementation as information system and users’ readiness to implement the EDM into pedagogical process organized at the non-formal level of the adult education. The organizational and pedagogical principles are considered as the organizational support and pedagogical conditions to form user’s willingness to implement EDM. The organizational and pedagogical model for EDM implementation is proposed. The typical life cycle model of EDM is supplemented by organizational and pedagogical model for EDM implementation, proposed in the paper.

Simulation of 10 A electron-beam formation and collection for a high current electron-beam ion source

International Nuclear Information System (INIS)

Kponou, A.; Beebe, E.; Pikin, A.; Kuznetsov, G.; Batazova, M.; Tiunov, M.

1998-01-01

Presented is a report on the development of an electron-beam ion source (EBIS) for the relativistic heavy ion collider at Brookhaven National Laboratory (BNL) which requires operating with a 10 A electron beam. This is approximately an order of magnitude higher current than in any existing EBIS device. A test stand is presently being designed and constructed where EBIS components will be tested. It will be reported in a separate paper at this conference. The design of the 10 A electron gun, drift tubes, and electron collector requires extensive computer simulations. Calculations have been performed at Novosibirsk and BNL using two different programs, SAM and EGUN. Results of these simulations will be presented. copyright 1998 American Institute of Physics

The selection of radiation tolerant electrical/electronic components for gamma radiation environments in the nuclear power industry

International Nuclear Information System (INIS)

Garlick, D.R.

1984-09-01

This report briefly describes the mechanisms, units and effects of 1 MeV range gamma radiation on electrical/electronic components and materials. Information is tabulated on the gamma radiation tolerance of a wide range of components and materials. A radiation testing service, based at Harwell, is described. Lists of interested manufacturers and organisations are given. (author)

GfW-handbook for data compilation of irradiation tested electronic components. Vol. 3

International Nuclear Information System (INIS)

Wulf, F.; Braeunig, D.; Boden, A.

1984-05-01

The 2nd edition is a continuation of the 1st edition and is published as a loose-leaf handbook. The 1st edition contained 190 test reports. In the volume 1 and volume 2 of the 2nd edition 120 test reports have been published so far. The present volume 3 of the 2nd edition provides further 53 test reports. These test reports of currently in space projects used electronic components have a standardized format. The results are given in a comprehensive but easily to handle graphical and tabular presentation. Statistical values are given in order to facilitate the components life time evaluation in a radiative environment. (orig./HP) [de

Antwerp Advanced Study Institute on Electronic Structure, Dynamics and Quantum Structural Properties of Condensed Matter

CERN Document Server

Camp, Piet

1985-01-01

The 1984 Advanced Study Institute on "Electronic Structure, Dynamics and Quantum Structural Properties of Condensed Matter" took place at the Corsendonk Conference Center, close to the City of Antwerpen, from July 16 till 27, 1984. This NATO Advanced Study Institute was motivated by the research in my Institute, where, in 1971, a project was started on "ab-initio" phonon calculations in Silicon. I~ is my pleasure to thank several instances and people who made this ASI possible. First of all, the sponsor of the Institute, the NATO Scientific Committee. Next, the co-sponsors: Agfa-Gevaert, Bell Telephone Mfg. Co. N.V., C & A, Esso Belgium·, CDC Belgium, Janssens Pharmaceutica, Kredietbank and the Scientific Office of the U.S. Army. Special thanks are due to Dr. P. Van Camp and Drs. H. Nachtegaele, who, over several months, prepared the practical aspects of the ASI with the secretarial help of Mrs. R.-M. Vandekerkhof. I also like to. thank Mrs. M. Cuyvers who prepared and organized the subject and material ...

Exploring the Relationships between the Electronic Health Record System Components and Patient Outcomes in an Acute Hospital Setting

Science.gov (United States)

Wiggley, Shirley L.

2011-01-01

Purpose: The purpose of this study was to examine the relationship between the electronic health record system components and patient outcomes in an acute hospital setting, given that the current presidential administration has earmarked nearly $50 billion to the implementation of the electronic health record. The relationship between the…

Thick-Film and LTCC Passive Components for High-Temperature Electronics

Directory of Open Access Journals (Sweden)

A. Dziedzic

2013-04-01

Full Text Available At this very moment an increasing interest in the field of high-temperature electronics is observed. This is a result of development in the area of wide-band semiconductors’ engineering but this also generates needs for passives with appropriate characteristics. This paper presents fabrication as well as electrical and stability properties of passive components (resistors, capacitors, inductors made in thick-film or Low-Temperature Co-fired Ceramics (LTCC technologies fulfilling demands of high-temperature electronics. Passives with standard dimensions usually are prepared by screen-printing whereas combination of standard screen-printing with photolithography or laser shaping are recommenced for fabrication of micropassives. Attainment of proper characteristics versus temperature as well as satisfactory long-term high-temperature stability of micropassives is more difficult than for structures with typical dimensions for thick-film and LTCC technologies because of increase of interfacial processes’ importance. However it is shown that proper selection of thick-film inks together with proper deposition method permit to prepare thick-film micropassives (microresistors, air-cored microinductors and interdigital microcapacitors suitable for the temperature range between 150°C and 400°C.

[Thirty years of the electron microscope investigation in zoology and parasitology in the Zoological Institute of the Russian Academy of Sciences].

Science.gov (United States)

Shatrov, A B

2003-01-01

The history of the electron microscope investigations in zoology and parasitology in the Zoological Institute of the Russian Academy of Sciences and progress in scanning and transmission electron microscope investigations in this field of biology to the moment are briefly accounted.

Critical issues in an electronic documentation system.

Science.gov (United States)

Weir, Charlene R; Nebeker, Jonathan R

2007-10-11

The Veterans Health Administration (VHA), of the U.S. Department of Veteran Affairs has instituted a medical record (EMR) that includes electronic documentation of all narrative components of the medical record. To support clinicians using the system, multiple efforts have been instituted to ease the creation of narrative reports. Although electronic documentation is easier to read and improves access to information, it also may create new and additional hazards for users. This study is the first step in a series of studies to evaluate the issues surrounding the creation and use of electronic documentation. Eighty-eight providers across multiple clinical roles were interviewed in 10 primary care sites in the VA system. Interviews were tape-recorded, transcribed and qualitatively analyzed for themes. In addition, specific questions were asked about perceived harm due to electronic documentation practices. Five themes relating to difficulties with electronic documentation were identified: 1) information overload; 2) hidden information; 3) lack of trust; 4) communication; 5) decision-making. Three providers reported that they knew of an incident where current documentation practices had caused patient harm and over 75% of respondents reported significant mis-trust of the system.

Carbon Nanotubes: Molecular Electronic Components

Science.gov (United States)

Srivastava, Deepak; Saini, Subhash; Menon, Madhu

1997-01-01

The carbon Nanotube junctions have recently emerged as excellent candidates for use as the building blocks in the formation of nanoscale molecular electronic networks. While the simple joint of two dissimilar tubes can be generated by the introduction of a pair of heptagon-pentagon defects in an otherwise perfect hexagonal graphene sheet, more complex joints require other mechanisms. In this work we explore structural characteristics of complex 3-point junctions of carbon nanotubes using a generalized tight-binding molecular-dynamics scheme. The study of pi-electron local densities of states (LDOS) of these junctions reveal many interesting features, most prominent among them being the defect-induced states in the gap.

Shaking table testing of mechanical components

International Nuclear Information System (INIS)

Jurukovski, D.; Taskov, Lj.; Mamucevski, D.; Petrovski, D.

1995-01-01

Presented is the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. Technical data and characteristics for the three shaking tables available at the Institute are given. Also, for characteristic mechanical components tested at the Institute laboratories, basic data such as producer, testing investor, description of the component, testing regulation, testing equipment and final user of the results. (author)

Laser resolution of unpolarized-electron scattering cross sections into spin-conserved and spin-flip components

International Nuclear Information System (INIS)

Ritchie, B.

1981-01-01

The theory is presented for one-photon free-free absorption by electrons scattering from high-Z atoms. The absorption cross section provides sufficient information to resolve the unpolarized-electron total cross section, Vertical Barf(theta)Vertical Bar 2 +Vertical Barg(theta)Vertical Bar 2 , into its individual components for spin-nonflip, Vertical Barf(theta)Vertical Bar 2 , and spin-flip, Vertical Barg(theta)Vertical Bar 2 , scattering. The observation of a spin-polarization effect for a spin-independent process (free-free absorption) is analogous to the Fano effect for bound-free absorption

Calorimetric Measuring Systems for Characterizing High Frequency Power Losses in Power Electronic Components and Systems

DEFF Research Database (Denmark)

Blaabjerg, Frede; Pedersen, John Kim; Ritchie, Andrew Ewen

2002-01-01

High frequency power losses in power electronic components and systems are very difficult to measure. The same applies to the efficiency of high-efficiency systems and components. An important method to measure losses with high accuracy is the calorimetric measuring systems. This paper describes...... to calibrate such systems are proposed and different applications of the system are given. Two practical examples end the description of the research. It is concluded that such systems have a relative long time-constant but they are accurate and useful for precise power loss measurement....

Microfabrication of passive electronic components with printed graphene-oxide deposition

Science.gov (United States)

Sinar, Dogan; Knopf, George K.; Nikumb, Suwas

2014-03-01

Flexible electronic circuitry is an emerging technology that will significantly impact the future of healthcare and medicine, food safety inspection, environmental monitoring, and public security. Recent advances in drop-on-demand printing technology and electrically conductive inks have enabled simple electronic circuits to be fabricated on mechanically flexible polymers, paper, and bioresorbable silk. Research has shown that graphene, and its derivative formulations, can be used to create low-cost electrically conductive inks. Graphene is a one atom thick two-dimensional layer composed of carbon atoms arranged in a hexagonal lattice forming a material with very high fracture strength, high Young's Modulus, and low electrical resistance. Non-conductive graphene-oxide (GO) inks can also be synthesized from inexpensive graphite powders. Once deposited on the flexible substrate the electrical conductivity of the printed GO microcircuit traces can be restored through thermal reduction. In this paper, a femtosecond laser with a wavelength of 775nm and pulse width of 120fs is used to transform the non-conductive printed GO film into electrically conductive oxygen reduced graphene-oxide (rGO) passive electronic components by the process of laser assisted thermal reduction. The heat affected zone produced during the process was minimized because of the femtosecond pulsed laser. The degree of conductivity exhibited by the microstructure is directly related to the laser power level and exposure time. Although rGO films have higher resistances than pristine graphene, the ability to inkjet print capacitive elements and modify local resistive properties provides for a new method of fabricating sensor microcircuits on a variety of substrate surfaces.

Identification and Hierarchy of Main Electronic Health Record Components in Occupational Medicine

Directory of Open Access Journals (Sweden)

Dorin TRIFF

2010-12-01

Full Text Available Starting from the legal requirements relating to structuring of medical records in occupational medicine and international requirements regarding the certification of electronic health records we have focused on structuring and then evaluating an EHR model in occupational medicine that integrates the main functions and certification criteria required by the European and US certification bodies. The application we designed, called Medmun, structured for use in occupational medicine practices based on the model of medical file provided by the Romanian legislation, integrates both necessary components of occupational medicine practice for administration of characteristic information related to socio-economic unit, work place, health surveillance as well as components of specific EHR functionality. The application has been submitted for free evaluation by specialist physicians of five counties over a period of nine months and subsequently assessed using a questionnaire on the usefulness of specific functional components in the EHR occupational medicine practice. The model was positively evaluated after experimental employment by occupational health practitioners. They consider that absence of legislative support for EHR implementation in medical practice is the main obstacle to the use of such applications in occupational medicine practice.

Higher Education Institution Branding as a Component of Country Branding in Ghana: Renaming Kwame Nkrumah University of Science and Technology

Science.gov (United States)

Williams, Robert, Jr.; Osei, Collins; Omar, Maktoba

2012-01-01

As Higher Education Institutions (HEI) become more marketised and increasingly promotionalised, brand building gains in intensity and names become increasingly important. This conceptual paper plans to explore the application of the Renaming Process Model which depicts the key components that impact the organization brand renaming process,…

76 FR 32373 - In the Matter of Certain Electronic Devices Having a Digital Television Receiver and Components...

Science.gov (United States)

2011-06-06

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-774] In the Matter of Certain Electronic Devices... AGENCY: U.S. International Trade Commission. ACTION: Institution of investigation pursuant to 19 U.S.C. 1337. SUMMARY: Notice is hereby given that a complaint was filed with the U.S. International Trade...

Investigation of irradiation effects on highly integrated leading-edge electronic components of diagnostics and control systems for LHD deuterium operation

Science.gov (United States)

Ogawa, K.; Nishitani, T.; Isobe, M.; Murata, I.; Hatano, Y.; Matsuyama, S.; Nakanishi, H.; Mukai, K.; Sato, M.; Yokota, M.; Kobuchi, T.; Nishimura, T.; Osakabe, M.

2017-08-01

High-temperature and high-density plasmas are achieved by means of real-time control, fast diagnostic, and high-power heating systems. Those systems are precisely controlled via highly integrated electronic components, but can be seriously affected by radiation damage. Therefore, the effects of irradiation on currently used electronic components should be investigated for the control and measurement of Large Helical Device (LHD) deuterium plasmas. For the precise estimation of the radiation field in the LHD torus hall, the MCNP6 code is used with the cross-section library ENDF B-VI. The geometry is modeled on the computer-aided design. The dose on silicon, which is a major ingredient of electronic components, over nine years of LHD deuterium operation shows that the gamma-ray contribution is dominant. Neutron irradiation tests were performed in the OKTAVIAN at Osaka University and the Fast Neutron Laboratory at Tohoku University. Gamma-ray irradiation tests were performed at the Nagoya University Cobalt-60 irradiation facility. We found that there are ethernet connection failures of programmable logic controller (PLC) modules due to neutron irradiation with a neutron flux of 3  ×  106 cm-2 s-1. This neutron flux is equivalent to that expected at basement level in the LHD torus hall without a neutron shield. Most modules of the PLC are broken around a gamma-ray dose of 100 Gy. This is comparable with the dose in the LHD torus hall over nine years. If we consider the dose only, these components may survive more than nine years. For the safety of the LHD operation, the electronic components in the torus hall have been rearranged.

Electronic theses and dissertations management in Brazil: about digital libraries of theses and dissertations and institutional repositories

Directory of Open Access Journals (Sweden)

Fernando César Lima Leite

2015-12-01

Full Text Available Introduction: This paper presents analysis on the management of electronic theses and dissertations in the Brazilian context. The dilemmas of digital library of theses and dissertations and institutional repositories coexistence and its implications are discussed and possible paths to be considered by actors, in the institutional and national level. Objective: Present and analyze implications of the digital library of theses and dissertations and institutional repositories coexistence as management systems and, moreover, propose and discuss alternatives faced by actors responsible for its management at the institutional and national levels. Methodology: Data on the status of theses and dissertations management systems were obtained by IBICT. The analysis allowed to group the Brazilian institutions in three major categories that represent the current state of management of theses and dissertations in Brazil. Results: The settings were obtained from three major scenarios and their institutional and national implications for the management of theses and dissertations. Of these settings were listed alternative solutions to the problems identified. Conclusions: Among the findings stand out: the continuity of the IBICT’s Brazilian Digital Library of Theses and Dissertations (BDTD does not necessarily imply the continuity of the digital library of theses and dissertations; Investment in institutional repositories does not mean the end of BDTD; Part of Brazilian universities and research institutions do not enjoy conditions that allow them to effectively maintain the two systems.

NATO Advanced Study Institute on Electron Crystallography

CERN Document Server

Weirich, Thomas E; Zou, Xiaodong

2006-01-01

During the last decade we have been witness to several exciting achievements in electron crystallography. This includes structural and charge density studies on organic molecules complicated inorganic and metallic materials in the amorphous, nano-, meso- and quasi-crystalline state and also development of new software, tailor-made for the special needs of electron crystallography. Moreover, these developments have been accompanied by a now available new generation of computer controlled electron microscopes equipped with high-coherent field-emission sources, cryo-specimen holders, ultra-fast CCD cameras, imaging plates, energy filters and even correctors for electron optical distortions. Thus, a fast and semi-automatic data acquisition from small sample areas, similar to what we today know from imaging plates diffraction systems in X-ray crystallography, can be envisioned for the very near future. This progress clearly shows that the contribution of electron crystallography is quite unique, as it enables to r...

Development of Standardized Power Electronic Components, Subsystems, and Systems for Increased Modularity and Scalability

Energy Technology Data Exchange (ETDEWEB)

Chakraborty, S.; Pink, C.; Price, J.; Kroposki, B.; Kern, G.

2007-11-01

Power electronics devices hold substantial promise for making distributed energy applications more efficient and cost effective. This project is motivated towards developing and testing inverters that will allow distributed energy systems to provide ancillary services such as voltage and VAR regulation, and increased grid reliability by seamlessly transitioning between grid-tied and stand-alone operation modes. The objectives of this project are to identify system integration and optimization issues and technologies and to provide solutions through research, analysis, and testing of power electronic interfaces for distributed energy applications that are cost-competitive and have substantially faster response times than conventional technologies. In addition, the testing of power electronics interfaces will develop a technical basis for performance assessment for distributed energy systems, subsystems, and components that will finally create a foundation for standardized measurements and test procedures. The ultimate goal for this research is to advance the potential benefits of distributed energy to provide ancillary services, enhance power system reliability, and allow customer choice.

Single-Institution Experience With Component Separation for Ventral Hernia Repair: A Retrospective Review.

Science.gov (United States)

Hill, Brian; Kambeyanda, Rohan; Fewell, Donna; Bryant, Stewart; Delaney, Kevin O; Herrera, Fernando A

2018-06-01

In this study, we reviewed our institution's experience using component separation for repair of ventral hernias. This was a retrospective review of all component separations for ventral hernia between July 2009 and December 2015. Recorded data included body mass index (BMI), preoperative albumin, smoking history, comorbidities, additional procedures, length of surgery, hospitalization, recurrence, and postoperative complications. One hundred ninety-six component separations were performed in the study period. The average patient age was 56 years, and 65.3% of patients were female. The average BMI was 32.6 kg/m; preoperative albumin was 3.59; 18.4% were current smokers; 28.1% were diabetic; and 14.3% had heart disease. Postoperative complications developed in 16.8% of patients. Recurrence developed in 8.7% of patients. Patients who developed a postoperative complication had a higher BMI (P = 0.025) and lower albumin (P = 0.047) compared with patients who did not develop complications. Current smokers were more likely to develop complications (P = 0.008). More than one third of patients had additional procedures at the time of the ventral hernia repair. The addition of a plastic surgery procedure was not associated with an increased risk of developing a complication (P = 0.25). Patients who developed complications had a significantly longer hospital course (P < 0.001) but no difference in total operative time (P = 0.975). Increased number of comorbidities did not statistically correlate with an increased complication rate (P = 0.65) or length of hospital stay (P = 0.43). We identified risk factors that increase the likelihood of postoperative complications and length of hospital stay. In addition, this study suggests that more comorbidities and additional procedures at the time of the hernia repair may not have as large of impact on complication risk as previously thought.

Electron acoustic waves and parametric instabilities in a 4-component relativistic quantum plasma with Thomas-Fermi distributed electrons

Science.gov (United States)

Ikramullah, Ahmad, Rashid; Sharif, Saqib; Khattak, Fida Younus

2018-01-01

The interaction of Circularly Polarized Electro-Magnetic (CPEM) waves with a 4-component relativistic quantum plasma is studied. The plasma constituents are: relativistic-degenerate electrons and positrons, dynamic degenerate ions, and Thomas-Fermi distributed electrons in the background. We have employed the Klein-Gordon equations for the electrons as well as for the positrons, while the ions are represented by the Schrödinger equation. The Maxwell and Poisson equations are used for electromagnetic waves. Three modes are observed: one of the modes is associated with the electron acoustic wave, a second mode at frequencies greater than the electron acoustic wave mode could be associated with the positrons, and the third one at the lowest frequencies could be associated with the ions. Furthermore, Stimulated Raman Scattering (SRS), Modulational, and Stimulated Brillouin Scattering (SBS) instabilities are studied. It is observed that the growth rates of both the SRS and SBS instabilities decrease with increase in the quantum parameter of the plasma. It is also observed that the scattering spectra in both the SRS and SBS get restricted to very small wavenumber regions. It is shown that for low amplitude CPEM wave interaction with the quantum plasma, the positron concentration has no effect on the SRS and SBS spectra. In the case of large amplitude CPEM wave interaction, however, one observes spectral changes with varying positron concentrations. An increase in the positron concentration also enhances the scattering instability growth rates. Moreover, the growth rate first increases and then decreases with increasing intensity of the CPEM wave, indicating an optimum value of the CPEM wave intensity for the growth of these scattering instabilities. The modulational instability also shows dependence on the quantum parameter as well as on the positron concentration.

Institutional blood glucose monitoring system for hospitalized patients: an integral component of the inpatient glucose control program.

Science.gov (United States)

Boaz, Mona; Landau, Zohar; Matas, Zipora; Wainstein, Julio

2009-09-01

The ability to measure patient blood glucose levels at bedside in hospitalized patients and to transmit those values to a central database enables and facilitates glucose control and follow-up and is an integral component in the care of the hospitalized diabetic patient. The goal of this study was to evaluate the performance of an institutional glucometer employed in the framework of the Program for the Treatment of the Hospitalized Diabetic Patient (PTHDP) at E. Wolfson Medical Center, Holon, Israel. As part of the program to facilitate glucose control in hospitalized diabetic patients, an institutional glucometer was employed that permits uploading of data from stands located in each inpatient department and downloading of that data to a central hospital-wide database. Blood glucose values from hospitalized diabetic patients were collected from August 2007 to October 2008. The inpatient glucose control program was introduced gradually beginning January 2008. During the follow-up period, more than 150,000 blood glucose measures were taken. Mean glucose was 195.7 +/- 99.12 mg/dl during the follow-up period. Blood glucose values declined from 206 +/- 105 prior to PTHDP (August 2007-December 2007) to 186 +/- 92 after its inception (January 2008-October 2008). The decline was associated significantly with time (r = 0.11, p < 0.0001). The prevalence of blood glucose values lower than 60 mg/dl was 1.48% [95% confidence interval (CI) 0.36%] prior to vs 1.55% (95% CI 0.37%) following implementation of the PTHDP. Concomitantly, a significant increase in the proportion of blood glucose values between 80 and 200 mg/dl was observed, from 55.5% prior to program initiation vs 61.6% after program initiation (p < 0.0001). The present study was designed to observe changes in institution-wide glucose values following implementation of the PTHDP. Information was extracted from the glucometer system itself. Because the aforementioned study was not a clinical trial, we cannot rule out

Independent component analysis: A new possibility for analysing series of electron energy loss spectra

International Nuclear Information System (INIS)

Bonnet, Nogl; Nuzillard, Danielle

2005-01-01

A complementary approach is proposed for analysing series of electron energy-loss spectra that can be recorded with the spectrum-line technique, across an interface for instance. This approach, called blind source separation (BSS) or independent component analysis (ICA), complements two existing methods: the spatial difference approach and multivariate statistical analysis. The principle of the technique is presented and illustrations are given through one simulated example and one real example

Acquisition of electrical signals using commercial electronic components for detection system of Lead ion in distilled water

Science.gov (United States)

Pujiyanto; Yasin, M.; Rusydi, F.

2018-03-01

Development of lead ion detection systems is expected to have an advantage in terms of simplicity of the device and easy for concentration analysis of a lead ion with very high performance. One important part of lead ion detection systems are electrical signal acquisition parts. The electrical signal acquisition part uses the main electronic components: non inverting op-amplifier, instrumentation amplifier, multiplier circuit and logarithmic amplifier. Here will be shown the performance of lead ion detection systems when the existing electrical signal processors use commercial electronic components. The results that can be drawn from this experimental were the lead ion sensor that has been developed can be used to detect lead ions with a sensitivity of 10.48 mV/ppm with the linearity 97.11% and had a measurement range of 0.1 ppm to 80 ppm.

Analysis of detached recombining plasmas by collisonal-radiative model with energetic electron component

International Nuclear Information System (INIS)

Ohno, N.; Motoyama, M.; Takamura, S.

2001-01-01

using CR model for a helium plasma (Goto-Fujimoto code), in which the energetic electron component (electron beam) is taken into account in addition to the bulk electron Maxwellian distribution function. It is found that the evaluated bulk electron temperature with the method of Boltzmann plot tends to decrease with an increase in the electron beam density and/or energy because the population densities in relatively lower excited states become large, comparing with those in higher excited state. This result agrees with the experimental observations. We have also analyzed transition of recombining plasma to ionizing one and vice versa in detail. This analysis can reproduce the inverse ELM phenomena observed in JET and ASDEX-U. (orig.)

Microstructural and micromechanical study of a Ti6Al4V component made by electron beam melting

Science.gov (United States)

Scherillo, F.; Franchitti, S.; Borrelli, R.; Pirozzi, C.; Squillace, A.; Langella, A.; Carrino, L.

2016-10-01

Additive Layer Manufacturing is one of the most promising and investigated manufacturing system due to its advantages to produces near net shape components, also with a very complex shape, in a single shot. Among the different techniques now available, the Electron Beam Melting (EBM) is of particular interest in the production of metal components. Particularly the application of this technique to titanium alloys allows to produces components with a very low buy to fly ratio. In the present paper the microstructure attained is accurately described and mini tensile tests performed allowed to understand the fracture behavior of specimen with the specific microstructure realized under static load.

3D Printed structural electronics: embedding and connecting electronic components into freeform electronic devices

NARCIS (Netherlands)

Maalderink, H.H.H.; Bruning, F.B.J.; Schipper, M.M.R. de; Werff, J.J.J. van der; Germs, W.W.C.; Remmers, J.J.C.; Meinders, E.R.

2018-01-01

The need for personalised and smart products drives the development of structural electronics with mass-customisation capability. A number of challenges need to be overcome in order to address the potential of complete free form manufacturing of electronic devices. One key challenge is the

3D Printed structural electronics : embedding and connecting electronic components into freeform electronic devices

NARCIS (Netherlands)

Maalderink, H.H.; Bruning, F.B.J.; de Schipper, M.R.; van der Werff, J.J.; Germs, W.C.; Remmers, J.J.C.; Meinders, E.R.

2018-01-01

The need for personalised and smart products drives the development of structural electronics with mass-customisation capability. A number of challenges need to be overcome in order to address the potential of complete free form manufacturing of electronic devices. One key challenge is the

HELCZA-High heat flux test facility for testing ITER EU first wall components.

Czech Academy of Sciences Publication Activity Database

Prokůpek, J.; Samec, K.; Jílek, R.; Gavila, P.; Neufuss, S.; Entler, Slavomír

2017-01-01

Roč. 124, November (2017), s. 187-190 ISSN 0920-3796. [SOFT 2016: Symposium on Fusion Technology /29./. Prague, 05.09.2016-09.09.2016] Institutional support: RVO:61389021 Keywords : HELCZA * High heat flux * Electron beam testing * Test facility * Plasma facing components * First wall * Divertora Subject RIV: JF - Nuclear Energetics OBOR OECD: Nuclear related engineering Impact factor: 1.319, year: 2016 www.sciencedirect.com/science/article/pii/S0920379617302818

ELECTRON COOLING FOR RHIC

International Nuclear Information System (INIS)

Ben-Zvi, I.

2001-01-01

The Accelerator Collider Department (CAD) at Brookhaven National Laboratory is operating the Relativistic Heavy Ion Collider (RHIC), which includes the dual-ring, 3.834 km circumference superconducting collider and the venerable AGS as the last part of the RHIC injection chain. CAD is planning on a luminosity upgrade of the machine under the designation RHIC II. One important component of the RHIC II upgrade is electron cooling of RHIC gold ion beams. For this purpose, BNL and the Budker Institute of Nuclear Physics in Novosibirsk entered into a collaboration aimed initially at the development of the electron cooling conceptual design, resolution of technical issues, and finally extend the collaboration towards the construction and commissioning of the cooler. Many of the results presented in this paper are derived from the Electron Cooling for RHIC Design Report [1], produced by the, BINP team within the framework of this collaboration. BNL is also collaborating with Fermi National Laboratory, Thomas Jefferson National Accelerator Facility and the University of Indiana on various aspects of electron cooling

ELECTRON COOLING FOR RHIC.

Energy Technology Data Exchange (ETDEWEB)

BEN-ZVI,I.

2001-05-13

The Accelerator Collider Department (CAD) at Brookhaven National Laboratory is operating the Relativistic Heavy Ion Collider (RHIC), which includes the dual-ring, 3.834 km circumference superconducting collider and the venerable AGS as the last part of the RHIC injection chain. CAD is planning on a luminosity upgrade of the machine under the designation RHIC II. One important component of the RHIC II upgrade is electron cooling of RHIC gold ion beams. For this purpose, BNL and the Budker Institute of Nuclear Physics in Novosibirsk entered into a collaboration aimed initially at the development of the electron cooling conceptual design, resolution of technical issues, and finally extend the collaboration towards the construction and commissioning of the cooler. Many of the results presented in this paper are derived from the Electron Cooling for RHIC Design Report [1], produced by the, BINP team within the framework of this collaboration. BNL is also collaborating with Fermi National Laboratory, Thomas Jefferson National Accelerator Facility and the University of Indiana on various aspects of electron cooling.

Electron spin resonance characterization of radical components in irradiated black pepper skin and core

International Nuclear Information System (INIS)

Yamaoki, Rumi; Kimura, Shojiro; Ohta, Masatoshi

2011-01-01

Characteristics of free radical components of irradiated black pepper fruit (skin) and the pepper seed (core) were analyzed using electron spin resonance. A weak signal near g=2.005 was observed in black pepper before irradiation. Complex spectra near g=2.005 with three lines (the skin) or seven lines (the core) were observed in irradiated black pepper (both end line width; ca. 6.8 mT). The spectral intensities decreased considerably at 30 days after irradiation, and continued to decrease steadily thereafter. The spectra simulated on the basis of the content and the stability of radical components derived from plant constituents, including fiber, starch, polyphenol, mono- and disaccharide, were in good agreement with the observed spectra. Analysis showed that the signal intensities derived from fiber in the skin for an absorbed dose were higher, and the rates of decrease were lower, than that in the core. In particular, the cellulose radical component in the skin was highly stable. - Highlights: → We identified the radical components in irradiated black pepper skin and core. → The ESR spectra near g=2.005 with 3-7 lines were emerged after irradiation. → Spectra simulated basing on the content and the stability of radical from the plant constituents. → Cellulose radical component in black pepper skin was highly stable. → Single signal near g=2.005 was the most stable in black pepper core.

NATO Advanced Study Institute on Electron and Magnetization Densities in Molecules and Crystals

CERN Document Server

1980-01-01

The interest of describing the ground state properties of a system in terms of one electron density (or its two spin components) is obvious, in particular due to the simple physical significance of this function. Recent experimental progress in diffraction made the measurement of charge and magnetization densities in crystalline solids possible, with an accuracy at least as good as theoretical accuracy. Theoretical developments of the many-body problem have proved the extreme importance of the one electron density function and presently, accurate methods of band structure determination become available. Parallel to the diffraction techniques, other domains of research (inelastic scattering, resonance, molecular spectroscopy) deal with quantities directly related to the one particle density. But the two types of studies do not interfere enough and one should obviously gain more information by interpreting all experiments that are related to the density together. It became necessary to have an International Sch...

75 FR 28651 - In the Matter of Certain Electronic Paper Towel Dispensing Devices and Components Thereof; Notice...

Science.gov (United States)

2010-05-21

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-718] In the Matter of Certain Electronic Paper Towel Dispensing Devices and Components Thereof; Notice of Investigation AGENCY: International Trade... that a complaint was filed with the U.S. International Trade Commission on April 19, 2010, under...

Sequential Proton Loss Electron Transfer in Deactivation of Iron(IV) Binding Protein by Tyrosine Based Food Components

DEFF Research Database (Denmark)

Tang, Ning; Skibsted, Leif Horsfelt

2017-01-01

The iron(IV) binding protein ferrylmyoglobin, MbFe(IV)=O, was found to be reduced by tyrosine based food components in aqueous solution through a sequential proton loss electron transfer reaction mechanism without binding to the protein as confirmed by isothermal titration calorimetry. Dopamine a...

Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company

Science.gov (United States)

Yahya, N. M.; Zahid, M. N. O.

2018-03-01

This study conducted to assess the work-related musculoskeletal disorders (WMDs) among the workers at core assembly production in an electronic components manufacturing company located in Pekan, Pahang, Malaysia. The study is to identify the WMDs risk factor and risk level. A set of questionnaires survey based on modified Nordic Musculoskeletal Disorder Questionnaires have been distributed to respective workers to acquire the WMDs risk factor identification. Then, postural analysis was conducted in order to measure the respective WMDs risk level. The analysis were based on two ergonomics assessment tools; Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). The study found that 30 respondents out of 36 respondents suffered from WMDs especially at shoulder, wrists and lower back. The WMDs risk have been identified from unloading process, pressing process and winding process. In term of the WMDs risk level, REBA and RULA assessment tools have indicated high risk level to unloading and pressing process. Thus, this study had established the WMDs risk factor and risk level of core assembly production in an electronic components manufacturing company at Malaysia environment.

Experimental and numerical investigation of flow field and heat transfer from electronic components in a rectangular channel with an impinging jet

Directory of Open Access Journals (Sweden)

Calisir Tamer

2015-01-01

Full Text Available Thermal control of electronic components is a continuously emerging problem as power loads keep increasing. The present study is mainly focused on experimental and numerical investigation of impinging jet cooling of 18 (3 × 6 array flash mounted electronic components under a constant heat flux condition inside a rectangular channel in which air, following impingement, is forced to exit in a single direction along the channel formed by the jet orifice plate and impingement plate. Copper blocks represent heat dissipating electronic components. Inlet flow velocities to the channel were measured by using a Laser Doppler Anemometer (LDA system. Flow field observations were performed using a Particle Image Velocimetry (PIV and thermocouples were used for temperature measurements. Experiments and simulations were conducted for Re = 4000 – 8000 at fixed value of H = 10 × Dh. Flow field results were presented and heat transfer results were interpreted using the flow measurement observations. Numerical results were validated with experimental data and it was observed that the results are in agreement with the experiments.

Non-destructive testing of electronic component packages

International Nuclear Information System (INIS)

Anderle, C.

1975-01-01

A non-destructive method of investigating packaged parts of semiconductor components by X radiation is described and the relevant theoretical relations limiting this technique are derived. The application of the technique is demonstrated in testing several components. The described method is iNsimple and quick. (author)

The Institutional Component of the Efficient Economic Policy of the State

Directory of Open Access Journals (Sweden)

Mykytas Viktoriia V

2016-01-01

Full Text Available The article substantiates the necessity of institutional accompanying the economic policy of the State, establishing an efficient system of institutions. Challenges of the contemporary globalization require changes in the State influence on economy, redefining quality parameters and principles of an efficient economic policy. Complexity of the State policy in a global environment is determined not only by importance of the tasks of establishing an efficient market against the background of increasing influences of exogenous uncertainty, but also by seeking ways of entering the global space, thus implementing the best interests of national economic development. The article deduces parameters of the concept of «efficient institution». The author believes that institutions precisely should act as the link through which social and economic development would become unseparated in order to form a stable efficient socio-economic development

Institutions, Anomie, and Violent Crime: Clarifying and Elaborating Institutional-Anomie Theory

Directory of Open Access Journals (Sweden)

Richard Rosenfeld

2008-11-01

Full Text Available A limited but accumulating body of research and theoretical commentary offers support for core claims of the “institutional-anomie theory” of crime (IAT and points to areas needing further development. In this paper, which focuses on violent crime, we clarify the concept of social institutions, elaborate the cultural component of IAT, derive implications for individual behavior, summarize empirical applications, and propose directions for future research. Drawing on Talcott Parsons, we distinguish the “subjective” and “objective” dimensions of institutional dynamics and discuss their interrelationship. We elaborate on the theory’s cultural component with reference to Durkheim’s distinction between “moral” and “egoistic” individualism and propose that a version of the egoistic type characterizes societies in which the economy dominates the institutional structure, anomie is rampant, and levels of violent crime are high. We also offer a heuristic model of IAT that integrates macro- and individual levels of analysis. Finally, we discuss briefly issues for the further theoretical elaboration of this macro-social perspective on violent crime. Specifically, we call attention to the important tasks of explaining the emergence of economic dominance in the institutional balance of power and of formulating an institutional account for distinctive punishment practices, such as the advent of mass incarceration in the United States.

32-element beta detector developed at the Institute of Electron Technology (ITE)

Science.gov (United States)

Wegrzecki, Maciej; Yakushev, Alexander; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kłos, Helena; Panas, Andrzej; Słysz, Wojciech; Stolarski, Maciej; Szmigiel, Dariusz; Wegrzecka, Iwona; Zaborowski, Michał

2014-08-01

The paper presents the design, technology and parameters of a new .silicon detector for detection of electrons (below named as beta detector) developed at the Institute of Electron Technology (ITE). The detector will be used for research on transactinide elements at the GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (GSI). The detector consists of a monolithic 32-element array with an active area diameter of 90 mm and a thickness of 0.9 mm. The starting material is a high-resistivity ν silicon wafer (5 kΩcm resistivity). 32 planar p+-ν junctions are formed by boron diffusion on the top side of the wafer. On the bottom side, an n+ region, which forms a common cathode, is formed on the entire surface by phosphorus diffusion. The array is mounted on a special epoxy-glass laminate substrate, copper-clad on both sides. Two model detectors have been fabricated and studied. Very good electrical parameters have been achieved. For the first array, with supply voltage VR = 20 V, the minimum dark current was 8 nA, the maximum dark current 97.1 nA, and the average dark current 25.1 nA. For the second array, it was 11.5 nA, 378.8 nA and 40.0 nA respectively.

Student Success and Institutional Accountability through the Components of Voluntary Framework Accountability

Science.gov (United States)

Mentzer, Stacy

2015-01-01

Demands on higher education institutions are growing. Stakeholders are demanding proof of quality to ensure students are receiving the education they are paying for. Institutional accountability is a growing concern for higher education institutions, more specifically community colleges. The diverse characteristics of community colleges have made…

Component aging illustrated in maintenance histories from IPRDS

International Nuclear Information System (INIS)

Kahl, W.K.; Borkowski, R.J.

1984-01-01

The centerpiece of the In-Plant Reliability Data (IPRD) program is a nuclear power plant component data base developed from corrective maintenance records. The primary objective of this program is to establish a comprehensive source of information for reliability analyses, including the compilation of maintenance histories for failure statistics. The IPRD program is currently a pilot effort that has 36 reactor-years of data on pumps, valves, diesel generators, batteries, battery chargers and inverters from five nuclear plants. The data are collected under the auspices of the Institute of Electrical and Electronics Engineers (IEEE) to certify anonymity of the participating plants, and is funded by the Nuclear Regulatory Commission

Multi-Institutional Sharing of Electronic Health Record Data to Assess Childhood Obesity.

Directory of Open Access Journals (Sweden)

L Charles Bailey

Full Text Available To evaluate the validity of multi-institutional electronic health record (EHR data sharing for surveillance and study of childhood obesity.We conducted a non-concurrent cohort study of 528,340 children with outpatient visits to six pediatric academic medical centers during 2007-08, with sufficient data in the EHR for body mass index (BMI assessment. EHR data were compared with data from the 2007-08 National Health and Nutrition Examination Survey (NHANES.Among children 2-17 years, BMI was evaluable for 1,398,655 visits (56%. The EHR dataset contained over 6,000 BMI measurements per month of age up to 16 years, yielding precise estimates of BMI. In the EHR dataset, 18% of children were obese versus 18% in NHANES, while 35% were obese or overweight versus 34% in NHANES. BMI for an individual was highly reliable over time (intraclass correlation coefficient 0.90 for obese children and 0.97 for all children. Only 14% of visits with measured obesity (BMI ≥95% had a diagnosis of obesity recorded, and only 20% of children with measured obesity had the diagnosis documented during the study period. Obese children had higher primary care (4.8 versus 4.0 visits, p<0.001 and specialty care (3.7 versus 2.7 visits, p<0.001 utilization than non-obese counterparts, and higher prevalence of diverse co-morbidities. The cohort size in the EHR dataset permitted detection of associations with rare diagnoses. Data sharing did not require investment of extensive institutional resources, yet yielded high data quality.Multi-institutional EHR data sharing is a promising, feasible, and valid approach for population health surveillance. It provides a valuable complement to more resource-intensive national surveys, particularly for iterative surveillance and quality improvement. Low rates of obesity diagnosis present a significant obstacle to surveillance and quality improvement for care of children with obesity.

Practical electronics handbook

CERN Document Server

Sinclair, Ian R

2013-01-01

Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

Electron accelerator shielding design of KIPT neutron source facility

Energy Technology Data Exchange (ETDEWEB)

Zhong, Zhao Peng; Gohar, Yousry [Argonne National Laboratory, Argonne (United States)

2016-06-15

The Argonne National Laboratory of the United States and the Kharkov Institute of Physics and Technology of the Ukraine have been collaborating on the design, development and construction of a neutron source facility at Kharkov Institute of Physics and Technology utilizing an electron-accelerator-driven subcritical assembly. The electron beam power is 100 kW using 100-MeV electrons. The facility was designed to perform basic and applied nuclear research, produce medical isotopes, and train nuclear specialists. The biological shield of the accelerator building was designed to reduce the biological dose to less than 5.0e-03 mSv/h during operation. The main source of the biological dose for the accelerator building is the photons and neutrons generated from different interactions of leaked electrons from the electron gun and the accelerator sections with the surrounding components and materials. The Monte Carlo N-particle extended code (MCNPX) was used for the shielding calculations because of its capability to perform electron-, photon-, and neutron-coupled transport simulations. The photon dose was tallied using the MCNPX calculation, starting with the leaked electrons. However, it is difficult to accurately tally the neutron dose directly from the leaked electrons. The neutron yield per electron from the interactions with the surrounding components is very small, ∼0.01 neutron for 100-MeV electron and even smaller for lower-energy electrons. This causes difficulties for the Monte Carlo analyses and consumes tremendous computation resources for tallying the neutron dose outside the shield boundary with an acceptable accuracy. To avoid these difficulties, the SOURCE and TALLYX user subroutines of MCNPX were utilized for this study. The generated neutrons were banked, together with all related parameters, for a subsequent MCNPX calculation to obtain the neutron dose. The weight windows variance reduction technique was also utilized for both neutron and photon dose

Electron paramagnetic resonance (EPR spectral components of spin-labeled lipids in saturated phospholipid bilayers: effect of cholesterol

Directory of Open Access Journals (Sweden)

Heverton Silva Camargos

2013-01-01

Full Text Available Electron paramagnetic resonance (EPR spectroscopy was used to study the main structural accommodations of spin labels in bilayers of saturated phosphatidylcholines with acyl chain lengths ranging from 16 to 22 carbon atoms. EPR spectra allowed the identification of two distinct spectral components in thermodynamic equilibrium at temperatures below and above the main phase transition. An accurate analysis of EPR spectra, using two fitting programs, enabled determination of the thermodynamic profile for these major probe accommodations. Focusing the analysis on two-component EPR spectra of a spin-labeled lipid, the influence of 40 mol % cholesterol in DPPC was studied.

Electronics and electronic systems

CERN Document Server

Olsen, George H

1987-01-01

Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

Design and properties of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

Science.gov (United States)

Wegrzecki, Maciej; Bar, Jan; Budzyński, Tadeusz; CieŻ, Michal; Grabiec, Piotr; Kozłowski, Roman; Kulawik, Jan; Panas, Andrzej; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecka, Iwona; Wielunski, Marek; Witek, Krzysztof; Yakushev, Alexander; Zaborowski, Michał

2013-07-01

The paper discusses the design of charged-particle detectors commissioned and developed at the Institute of Electron Technology (ITE) in collaboration with foreign partners, used in international research on transactinide elements and to build personal radiation protection devices in Germany. Properties of these detectors and the results obtained using the devices are also presented. The design of the following epiplanar detector structures is discussed: ♢ 64-element chromatographic arrays for the COMPACT (Cryo On-line Multidetector for Physics And Chemistry of Transactinides) detection system used at the GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt (GSI) for research on Hassium, Copernicium and Flerovium, as well as elements 119 and 120, ♢ 2-element flow detectors for the COLD (Cryo On-Line Detector) system used for research on Copernicium and Flerovium at the Joint Institute for Nuclear Research, Dubna, ♢ detectors for a radon exposimeter and sensors for a neutron dosimeter developed at the Institut für Strahlenschutz, Helmholtz Zentrum München. The design of planar detectors - single-sided and double-sided strip detectors for the Focal Plane Detector Box used at GSI for research on Flerovium and elements 119 and 120 is also discussed.

Electronic equipment and radioisotope devices developed in the Institute of Physics and Nuclear Techniques in the years 1975-1983

International Nuclear Information System (INIS)

1983-01-01

A short review of 43 devices developed in the Institute of Physics and Nuclear Techniques of Academy of Mining and Metallurgy in the years 1975-1983 is given. 20 radioisotope arrangements, 14 electronic devices, 7 detectors for gas chromatography and X-ray detection as well as 2 arrangements for sample preparation are presented. (author)

The Incredible Shrinking Institution: A Five-Component Downsizing Model.

Science.gov (United States)

Dawson, Bradley L.

1991-01-01

Most colleges and universities need to reduce expenditures and downsize. Such a project is difficult and emotionally charged. Many immediate remedies can ba applied to reduce and better control expenditures, but a more thorough analysis of the institution's organizational structure, operating procedures, automated systems, strategic planning, and…

Analysis of contaminants on electronic components by reflectance FTIR spectroscopy

International Nuclear Information System (INIS)

Griffith, G.W.

1982-09-01

The analysis of electronic component contaminants by infrared spectroscopy is often a difficult process. Most of the contaminants are very small, which necessitates the use of microsampling techniques. Beam condensers will provide the required sensitivity but most require that the sample be removed from the substrate before analysis. Since it can be difficult and time consuming, it is usually an undesirable approach. Micro ATR work can also be exasperating, due to the difficulty of positioning the sample at the correct place under the ATR plate in order to record a spectrum. This paper describes a modified reflection beam condensor which has been adapted to a Nicolet 7199 FTIR. The sample beam is directed onto the sample surface and reflected from the substrate back to the detector. A micropositioning XYZ stage and a close-focusing telescope are used to position the contaminant directly under the infrared beam. It is possible to analyze contaminants on 1 mm wide leads surrounded by an epoxy matrix using this device. Typical spectra of contaminants found on small circuit boards are included

Effectiveness of electron beam microbial decontamination and change of essential oil components in fennel

International Nuclear Information System (INIS)

Yamaoki, Rumi; Kimura, Shojiro; Ohtsu, Naomi; Chikuta, Yasuhiro; Mino, Yoshiki; Aoki, Kenji; Ohta, Masatoshi

2008-01-01

The effectiveness of electron beam (EB) disinfection and sterilization technology and the changes of essential oil components in fennel were investigated. The absorbed dose was maximal at a depth of 0.9-1.0 g/cm 2 , which was 130% of the surface dose of 15 kGy in packed fennel irradiated with 5 MeV EB in a downward direction, and decreased in the deepest layer. As a result, in a fennel bacterial count of 10 5 cfu/g, a microbial contamination level below 1.0x10 3 cfu/g was obtained at a packing depth of 2.3 g/cm 2 and at the absorbed dose of more than 3 kGy. The bacteria in fennel were highly sensitive to EB irradiation. Furthermore, EB irradiation had no effect on the essential oil content of fennel, and no change of the essential oil components was found at the irradiation level necessary for decontamination. (author)

QUANTITATIVE ELECTRONIC STRUCTURE - ACTIVITY RELATIONSHIP OF ANTIMALARIAL COMPOUND OF ARTEMISININ DERIVATIVES USING PRINCIPAL COMPONENT REGRESSION APPROACH

Directory of Open Access Journals (Sweden)

Paul Robert Martin Werfette

2010-06-01

Full Text Available Analysis of quantitative structure - activity relationship (QSAR for a series of antimalarial compound artemisinin derivatives has been done using principal component regression. The descriptors for QSAR study were representation of electronic structure i.e. atomic net charges of the artemisinin skeleton calculated by AM1 semi-empirical method. The antimalarial activity of the compound was expressed in log 1/IC50 which is an experimental data. The main purpose of the principal component analysis approach is to transform a large data set of atomic net charges to simplify into a data set which known as latent variables. The best QSAR equation to analyze of log 1/IC50 can be obtained from the regression method as a linear function of several latent variables i.e. x1, x2, x3, x4 and x5. The best QSAR model is expressed in the following equation,  (;;   Keywords: QSAR, antimalarial, artemisinin, principal component regression

Use and User Perception of Electronic Information Resources: A Case Study of Siva Institute of Frontier Technology, India

Directory of Open Access Journals (Sweden)

Velmurugan Chandran

2013-12-01

Full Text Available The present study aims to explore the use and user perception of electronic resources in Siva Institute of Frontier Technology, India. A total number of 123 users were taken into account for the study through a questionnaire-based survey method. A well-structured questionnaire was designed and distributed to the selected 200 students and staff members. 123 copies of the questionnaires were returned dully filled in and the overall response rate was 61.50 percent. The questionnaire contained both open- and close-ended questions. The collected data were classified, analyzed, and tabulated by using simple statistical methods. This study covers the impact of electronic resources on students and faculty in their academic pursuit.

Central Laboratory of X-ray and Electron Microscopy Research at the Institute of Physics of the Polish Academy of Sciences, Warsaw

International Nuclear Information System (INIS)

Zymierska, D.

2008-01-01

The beginning and history of the Central Laboratory of X-ray and Electron Microscopy at the Institute of Physics of the Polish Academy of Sciences in Warsaw is described. Then, recent scientific achievements are presented. Organising activities of the Laboratory staff are also mentioned. (author)

Shaking table qualification tests of mechanical and electrical components

International Nuclear Information System (INIS)

Jurukovski, D.

1993-01-01

This presentation covers the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. The characteristics of the biaxial seismic and single component shaking tables used at the Institute are given. Some examples of the experience from performed test for reactor components are included

Financial management and job social skills training components in a summer business institute: a controlled evaluation in high achieving predominantly ethnic minority youth.

Science.gov (United States)

Donohue, Brad; Conway, Debbie; Beisecker, Monica; Murphy, Heather; Farley, Alisha; Waite, Melissa; Gugino, Kristin; Knatz, Danielle; Lopez-Frank, Carolina; Burns, Jack; Madison, Suzanne; Shorty, Carrie

2005-07-01

Ninety-two adolescents, predominantly ethnic minority high school students, participated in a structured Summer Business Institute (SBI). Participating youth were randomly assigned to receive either job social skills or financial management skills training components. Students who additionally received the job social skills training component were more likely to recommend their employment agency to others than were youth who received the financial management component, rated their overall on-the-job work experience more favorably, and demonstrated higher scores in areas that were relevant to the skills that were taught in the job social skills workshops. The financial management component also appeared to be relatively effective, as youth who received this intervention improved their knowledge of financial management issues more than youth who received job social skills, and rated their workshops as more helpful in financial management, as well as insurance management. Future directions are discussed in light of these results.

Institutional dynamics and the negotiation process

DEFF Research Database (Denmark)

Kumar, Rajesh; Worm, Verner

2004-01-01

The paper develops the argument for analyzing negotiations from an institutional perspective. A major theme of the argument being advanced in the paper is that the institutional perspective provides a more comprehensive understanding of the negotiation process in its entirety. The negotiation...... process can be broken down into three distinct components, namely (a) the pre negotiation phase; (b) the negotiating phase; and (c) the post negotiation evaluation. Each of these phases is critically influenced by a specific component or components of the institutional environment. Scott's distinction...... and their implications for negotiating processes in these countries. Choosing India and China to illustrate the utility of this framework is justified by the fact that India and China are both in the process of transforming their economies and although confronted with similar challenges they have dealt with them in very...

[Integration of fundamental and applied medical and technical research made at the department of the biomedical systems, Moscow State Institute of Electronic Engineering].

Science.gov (United States)

Selishchev, S V

2004-01-01

The integration results of fundamental and applied medical-and-technical research made at the chair of biomedical systems, Moscow state institute of electronic engineering (technical university--MSIEE), are described in the paper. The chair is guided in its research activity by the traditions of higher education in Russia in the field of biomedical electronics and biomedical engineering. Its activities are based on the extrapolation of methods of electronic tools, computer technologies, physics, biology and medicine with due respect being paid to the requirements of practical medicine and to topical issues of research and design.

Analysis of Gamma-irradiated Soybean Components by Electron Paramagnetic Resonance

International Nuclear Information System (INIS)

Oliveira, M.R. R. de; Quadrado, M.G.O.; Mastro, N.L. del

2007-01-01

Soybean (Glycine max) seeds contain besides oil and protein, important phytochemicals that have been shown in recent years to offer important health benefits. Soybean contains at least six classes of antioxidant compounds: flavonol, isoflavones, anthocyanins, proanthocyanidins, tocopherols, and poly carboxylic acids. An increasing number of studies have documented the significant value of many classes of these compounds, mainly isoflavones, not only as potent antioxidants, but also as antitumor agents and cardio protective compounds. Food irradiation is gaining increasing attention around the world but it is not a worldwide approved treatment yet. Electron paramagnetic resonance, EPR, is considered the most important technique to detect free-radicals on food. Results from a previous work showed that irradiated soybean could be detected by EPR only when higher doses were employed. This study was undertaken to investigate the radiation response of the diverse parts of the soy seed: hull or seed coat, cotyledons, hilum and hypocotyl axis or germ, from different soybean cultivars. Soybean samples were obtained from the National Soybean Research Center (Embrapa-Soja), Londrina, Brazil, separated in their components and gamma-irradiated in a Gamma cell 220 (AECL) with doses of 0.1 and 2.0 kGy at a dose rate of 2.9 kGy/h. EPR measurements were performed on an X-band spectrometer (ER 041 XG Microwave Bridge, Bruker). Both irradiation and EPR measurements were performed at room temperature (20-25 C). The results showed that the EPR signal intensity correlated with the ionizing radiation dose, although different cultivars presented differences in their radiation response. The main EPR peak corresponding to free radical presented differences in shape and intensity. The hull and the hilum presented signals higher and easier to be analyzed than the whole bean, indicating strong differences in radiation sensitivity of soybean components. (Author)

Spin-orbit coupling calculations with the two-component normalized elimination of the small component method

Science.gov (United States)

Filatov, Michael; Zou, Wenli; Cremer, Dieter

2013-07-01

A new algorithm for the two-component Normalized Elimination of the Small Component (2cNESC) method is presented and tested in the calculation of spin-orbit (SO) splittings for a series of heavy atoms and their molecules. The 2cNESC is a Dirac-exact method that employs the exact two-component one-electron Hamiltonian and thus leads to exact Dirac SO splittings for one-electron atoms. For many-electron atoms and molecules, the effect of the two-electron SO interaction is modeled by a screened nucleus potential using effective nuclear charges as proposed by Boettger [Phys. Rev. B 62, 7809 (2000), 10.1103/PhysRevB.62.7809]. The use of the screened nucleus potential for the two-electron SO interaction leads to accurate spinor energy splittings, for which the deviations from the accurate Dirac Fock-Coulomb values are on the average far below the deviations observed for other effective one-electron SO operators. For hydrogen halides HX (X = F, Cl, Br, I, At, and Uus) and mercury dihalides HgX2 (X = F, Cl, Br, I) trends in spinor energies and SO splittings as obtained with the 2cNESC method are analyzed and discussed on the basis of coupling schemes and the electronegativity of X.

A study on the secondary electrons in a clinical electron beam

International Nuclear Information System (INIS)

Krithivas, G.; Rao, S.N.

1989-01-01

The central axis dose of a 12 MeV clinical electron beam is investigated in terms of an axial component due to primary electrons in the central ray and a lateral component due to secondary electrons originating from multiple scattering of electrons in the off-axis rays. To this effect secondary electron fluence measurements in a polystyrene medium irradiated with a collimated beam are made with a sensitive diode detector. This leads to a construction of secondary electron depth-dose profiles for beam sizes of diameters ranging from 1.7 to 17.4 cm. The results indicate that the lateral electrons account for 25% of the dose in the therapeutic region. For these electrons, the depth of dose maximum is correlated with diffusion depth and maximum lateral excursion in the medium. Dose component due to backscatter electrons at depths is also investigated using a thin-window parallel-plate ion chamber. The role of lateral and backscatter electrons in characterising central axis per cent depth-dose is discussed. (author)

Low-order longitudinal modes of single-component plasmas

International Nuclear Information System (INIS)

Tinkle, M.D.; Greaves, R.G.; Surko, C.M.

1995-01-01

The low-order modes of spheroidal, pure electron plasmas have been studied experimentally, both in a cylindrical electrode structure and in a quadrupole trap. Comparison is made between measurements of mode frequencies, recent analytical theories, and numerical simulations. Effects considered include trap anharmonicity, image charges, and temperature. Quantitative agreement is obtained between the predictions and these measurements for spheroidal plasmas in the quadrupole trap. In many experiments on single-component plasmas, including antimatter plasmas, the standard diagnostic techniques used to measure the density and temperature are not appropriate. A new method is presented for determining the size, shape, average density, and temperature of a plasma confined in a Penning trap from measurements of the mode frequencies. copyright 1995 American Institute of Physics

Risk mitigation of shared electronic records system in campus institutions: medical social work practice in singapore.

Science.gov (United States)

Ow Yong, Lai Meng; Tan, Amanda Wei Li; Loo, Cecilia Lay Keng; Lim, Esther Li Ping

2014-10-01

In 2013, the Singapore General Hospital (SGH) Campus initiated a shared electronic system where patient records and documentations were standardized and shared across institutions within the Campus. The project was initiated to enhance quality of health care, improve accessibility, and ensure integrated (as opposed to fragmented) care for best outcomes in our patients. In mitigating the risks of ICT, it was found that familiarity with guiding ethical principles, and ensuring adherence to regulatory and technical competencies in medical social work were important. The need to negotiate and maneuver in a large environment within the Campus to ensure proactive integrative process helped.

Mass transfer in fuel cells. [electron microscopy of components, thermal decomposition of Teflon, water transport, and surface tension of KOH solutions

Science.gov (United States)

Walker, R. D., Jr.

1973-01-01

Results of experiments on electron microscopy of fuel cell components, thermal decomposition of Teflon by thermogravimetry, surface area and pore size distribution measurements, water transport in fuel cells, and surface tension of KOH solutions are described.

Korteweg-deVries-Burgers (KdVB) equation in a five component cometary plasma with kappa described electrons and ions

Science.gov (United States)

Michael, Manesh; Willington, Neethu T.; Jayakumar, Neethu; Sebastian, Sijo; Sreekala, G.; Venugopal, Chandu

2016-12-01

We investigate the existence of ion-acoustic shock waves in a five component cometary plasma consisting of positively and negatively charged oxygen ions, kappa described hydrogen ions, hot solar electrons, and slightly colder cometary electrons. The KdVB equation has been derived for the system, and its solution plotted for different kappa values, oxygen ion densities, as well as the temperature ratios for the ions. It is found that the amplitude of the shock wave decreases with increasing kappa values. The strength of the shock profile decreases with increasing temperatures of the positively charged oxygen ions and densities of negatively charged oxygen ions.

An algorithm to include the bremsstrahlung component in the determination of the absorbed dose in electron beams

Energy Technology Data Exchange (ETDEWEB)

Klevenhagen, S C [The Royal London Hospital, London (United Kingdom). Medical Physics Dept.

1996-08-01

Currently used dosimetry protocols for absolute dose determination of electron beams from accelerators in radiation therapy do not account for the effect of the bremsstrahlung contamination of the beam. This results in slightly erroneous doses calculated from ionization chamber measurements. In this report the deviation is calculated and an improved algorithm, which accounts for the effect of the bremsstrahlung component of the beam, is suggested. (author). 14 refs, 2 figs, 1 tab.

Disinfection of municipal sewage sludges in installation equipped with electron accelerator

International Nuclear Information System (INIS)

Chmielewski, A.G.; Zimek, Z.; Bryl-Sandelewska, T.; Kosmal, W.; Kalisz, L.; Kazmierczuk, M.

1995-01-01

Growing awareness of environment pollution hazards causes more and more stringent waste disposal regulations in many countries which stimulate searching for new methods of waste disposal, the best of which is recycling them after suitable treatment. Sludges from municipal sewage treatment plants contain organic and inorganic components valuable as soil fertilizer, so if disinfected they can be beneficially recycled in agriculture instead of being burdensome waste. Investigations performed in many countries showed that irradiation with a suitable dose of gamma or electron beam radiation makes sewage sludges sanitary safe and usable as soil fertilizer immediately after treatment. This paper describes some results of investigations performed in the Institute of Nuclear Chemistry and Technology and the Institute of Environmental Protection in Warsaw on the influence of 10 MeV electron beam on bacteria, parasites and parasite eggs present in sewage sludges from different municipal sewage treatment plants in Poland. Basic design parameters of the industrial installation elaborated on the basis of those experiments are presented. (Author)

Study of the experience feedback relating to ageing of electronic components and cables

International Nuclear Information System (INIS)

Gauthier, G.; Henry, J.Y.

1992-11-01

This study was conducted on electronic components and electrical cables taken from the Brennilis EL4 reactor, during dismantling, after 18 years of operation. Its aim was to examine the state of the equipment taken from the site and thus to check its characteristics and in particular for cables: to check, whenever possible, the suitability of the accelerated ageing methods by comparing the characteristics observed on the samples from EL4 with test samples held in storage and previously subjected to similar accelerated ageing: predicting medium and long-term ageing by extrapolation from the selected mathematical model. The result of this initial work confirmed the need for extreme caution regarding the accelerated ageing methods. Further work on cables and polymers is underway and will enable the laws currently used for qualification tests to be evaluated

Characterization of cooling systems based on heat pipe principle to control operation temperature of high-tech electronic components

International Nuclear Information System (INIS)

Dobre, Tanase; Parvulescu, Oana Cristina; Stoica, Anicuta; Iavorschi, Gustav

2010-01-01

The use of cooling systems based on heat pipe principle to control operation temperature of electronic components is very efficient. They have an excellent miniaturizing capacity and this fact creates adaptability for more practical situations. Starting from the observation that these cooling systems are not precisely characterized from the thermal efficiency point of view, the present paper proposes a methodology of data acquisition for their thermal characterization. An experimental set-up and a data processing algorithm are shown to describe the cooling of a heat generating electronic device using heat pipes. A Thermalright SI-97 PC cooling system is employed as a case-study to determine the heat transfer characteristics of a fins cooler.

Influence of electron-phonon interaction on soliton mediated spin-charge conversion effects in two-component polymer model

International Nuclear Information System (INIS)

Sergeenkov, S.; Moraes, F.; Furtado, C.; Araujo-Moreira, F.M.

2010-01-01

By mapping a Hubbard-like model describing a two-component polymer in the presence of strong enough electron-phonon interactions (κ) onto the system of two coupled nonlinear Schroedinger equations with U(2) symmetry group, some nontrivial correlations between topological solitons mediated charge Q and spin S degrees of freedom are obtained. Namely, in addition to a charge fractionalization and reentrant like behavior of both Q(κ) and S(κ), the model also predicts a decrease of soliton velocity with κ as well as spin-charge conversion effects which manifest themselves through an explicit S(Q,Ω) dependence (with Ω being a mixing angle between spin-up and spin-down electron amplitudes). A possibility to observe the predicted effects in low-dimensional systems with charge and spin soliton carriers is discussed.

Jozef Stefan Institute annual report for 1986

International Nuclear Information System (INIS)

Gams, M.

1987-06-01

This report presents the main features of the Josef Stefan Institute work in the course of the year 1986. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, nuclear, solid state and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy and process control and professional electronics), reactor engineering and safety, and applied mathematics and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.). 1143 refs

A 2 MW, 170 GHz coaxial cavity gyrotron - experimental verification of the design of main components

Energy Technology Data Exchange (ETDEWEB)

Piosczyk, B [Forschungszentrum Karlsruhe, Association EURATOM-FZK, Institut fuer Hochleistungsimpuls- und Mikrowellentechnik (IHM), Postfach 3640, D-76021 Karlsruhe (Germany); Dammertz, G [Forschungszentrum Karlsruhe, Association EURATOM-FZK, Institut fuer Hochleistungsimpuls- und Mikrowellentechnik (IHM), Postfach 3640, D-76021 Karlsruhe (Germany); Dumbrajs, O [Department of Engineering Physics and Mathematics, Helsinki University of Technology, Association EURATOM-TEKES, FIN-02150 Espoo (Finland)] (and others)

2005-01-01

A 2 MW, CW, 170 GHz coaxial cavity gyrotron is under development in cooperation between European Research Institutions (FZK Karlsruhe, CRPP Lausanne, HUT Helsinki) and the European tube industry (TED, Velizy, France). The design of critical components has recently been examined experimentally at FZK Karlsruhe with a short pulse ({approx} few ms) coaxial cavity gyrotron. This gyrotron uses the same cavity and the same quasioptical (q.o.) RF-output system as designed for the industrial prototype and a very similar electron gun.

Runtime Concepts of Hierarchical Software Components

Czech Academy of Sciences Publication Activity Database

Bureš, Tomáš; Hnětynka, P.; Plášil, František

2007-01-01

Roč. 8, special (2007), s. 454-463 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : component-based development * hierarchical components * connectors * controlers * runtime environment Subject RIV: JC - Computer Hardware ; Software

ANALYSIS OF THEORETICAL AND METHODOLOGICAL APPROACHES TO DESIGN OF ELECTRONIC TEXTBOOKS FOR STUDENTS OF HIGHER AGRICULTURAL EDUCATIONAL INSTITUTIONS

Directory of Open Access Journals (Sweden)

Olena Yu. Balalaieva

2017-06-01

Full Text Available The article deals with theoretical and methodological approaches to the design of electronic textbook, in particular systems, competence, activity, personality oriented, technological one, that in complex reflect the general trends in the formation of a new educational paradigm, distinctive features of which lie in constructing the heuristic searching model of the learning process, focusing on developmental teaching, knowledge integration, skills development for the independent information search and processing, technification of the learning process. The approach in this study is used in a broad sense as a synthesis of the basic ideas, views, principles that determine the overall research strategy. The main provisions of modern approaches to design are not antagonistic, they should be applied in a complex, taking into account the advantages of each of them and leveling shortcomings for the development of optimal concept of electronic textbook. The model of electronic textbook designing and components of methodology for its using based on these approaches are described.

ELECTRONIC COMPONENT COOLING ALTERNATIVES: COMPRESSED AIR AND LIQUID NITROGEN

Science.gov (United States)

The goal of this study was to evaluate topics used to troubleshoot circuit boards with known or suspected thermally intermittent components. Failure modes for thermally intermittent components are typically mechanical defects, such as cracks in solder paths or joints, or broken b...

Analytical energy gradient for the two-component normalized elimination of the small component method

Science.gov (United States)

Zou, Wenli; Filatov, Michael; Cremer, Dieter

2015-06-01

The analytical gradient for the two-component Normalized Elimination of the Small Component (2c-NESC) method is presented. The 2c-NESC is a Dirac-exact method that employs the exact two-component one-electron Hamiltonian and thus leads to exact Dirac spin-orbit (SO) splittings for one-electron atoms. For many-electron atoms and molecules, the effect of the two-electron SO interaction is modeled by a screened nucleus potential using effective nuclear charges as proposed by Boettger [Phys. Rev. B 62, 7809 (2000)]. The effect of spin-orbit coupling (SOC) on molecular geometries is analyzed utilizing the properties of the frontier orbitals and calculated SO couplings. It is shown that bond lengths can either be lengthened or shortened under the impact of SOC where in the first case the influence of low lying excited states with occupied antibonding orbitals plays a role and in the second case the jj-coupling between occupied antibonding and unoccupied bonding orbitals dominates. In general, the effect of SOC on bond lengths is relatively small (≤5% of the scalar relativistic changes in the bond length). However, large effects are found for van der Waals complexes Hg2 and Cn2, which are due to the admixture of more bonding character to the highest occupied spinors.

High dose effect of gamma and neutrons on the N-JFET electronic components

International Nuclear Information System (INIS)

Assaf, Jamal-Eddin

2006-11-01

Two types of N-JFET components have been irradiated by high doses of thermal neutrons and gamma rays up to 2000x10 12 n/cm 2 and 1000 kGy, respectively. The static tests show a decrease of the g m and I d s parameters. The behaviour of electronic noise on the output was the principal dynamic test after irradiation. The result of this test gives an increase of the noise with radiation dose increasing. The noise was described as the Equivalent Noise of Charge (ENC) at the output of the measurements set-up. The quantities and the qualities of the noise depend on the N-JEET type and the type of radiation (neutrons or gamma). Other tests were carried out like the relaxation or recovery phenomena after radiation, and the superposed effects of gamma and neutrons.(author)

GfW-handbook for irradiation test guidelines for radiation hardness of electronic components

International Nuclear Information System (INIS)

Braeunig, D.; Wulf, F.; Gaebler, W.; Boden, A.

1982-12-01

The purpose of the report is to propose irradiation test methods so that a standardized application of the methods can lead to a better comparison of test results. The interaction of different radiation species with matter - ionization and displacement - is described. Application of appropriate radiation sources, dosimetry problems, and shielding for simulating space radiation effects by laboratory testing is discussed. The description and characteristics of the irradiation sources are presented. Flowcharts of the planning and running of irradiation tests are given. Guidelines for running the tests are established, test methods and test circuits are proposed. The test system offers the capability of measuring devices also of high complexity up to microprocessors. The test results are collected regularly and are published in GfW-Handbook TN53/08, 'Data Compilation of Irradiation Tested Electronic Components'. (orig./HP) [de

Study of the experience feedback relating to ageing of electronic component and cables

International Nuclear Information System (INIS)

Gauthier, G.; Henry, J.Y.

1992-11-01

This study was conducted on electronic components and electrical cables taken from the Brennilis EL4 reactor, during dismantling, after 18 years of operation. Its aim was to examine the state of the equipment taken from the site and thus to check its characteristics and in particular for cables: to check, whenever possible, the suitability of the accelerated ageing methods by comparing the characteristics observed on the samples from EL4 with test samples held in storage and previously subjected to similar accelerated ageing: predicting medium and long-term ageing by extrapolation from the selected mathematical model. The result of this initial work confirmed the need for extreme caution regarding the accelerated ageing methods. Further work on cables and polymers is underway and will enable the laws currently used for qualification tests to be evaluated. (author) [fr

Vlasov Simulation of Electrostatic Solitary Structures in Multi-Component Plasmas

Science.gov (United States)

Umeda, Takayuki; Ashour-Abdalla, Maha; Pickett, Jolene S.; Goldstein, Melvyn L.

2012-01-01

Electrostatic solitary structures have been observed in the Earth's magnetosheath by the Cluster spacecraft. Recent theoretical work has suggested that these solitary structures are modeled by electron acoustic solitary waves existing in a four-component plasma system consisting of core electrons, two counter-streaming electron beams, and one species of background ions. In this paper, the excitation of electron acoustic waves and the formation of solitary structures are studied by means of a one-dimensional electrostatic Vlasov simulation. The present result first shows that either electron acoustic solitary waves with negative potential or electron phase-space holes with positive potential are excited in four-component plasma systems. However, these electrostatic solitary structures have longer duration times and higher wave amplitudes than the solitary structures observed in the magnetosheath. The result indicates that a high-speed and small free energy source may be needed as a fifth component. An additional simulation of a five-component plasma consisting of a stable four-component plasma and a weak electron beam shows the generation of small and fast electron phase-space holes by the bump-on-tail instability. The physical properties of the small and fast electron phase-space holes are very similar to those obtained by the previous theoretical analysis. The amplitude and duration time of solitary structures in the simulation are also in agreement with the Cluster observation.

Electronic technology

International Nuclear Information System (INIS)

Kim, Jin Su

2010-07-01

This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

IEEE Milestone at CERN - W Cleon Anderson (right), president of the Institute of Electrical and Electronics Engineers, unveils the Milestone plaque at CERN, together with Georges Charpak

CERN Multimedia

Maximilien Brice

2005-01-01

At a ceremony on 26 September at CERN, W Cleon Anderson, president of the Institute of Electrical and Electronics Engineers (IEEE), formally dedicated a "Milestone" plaque in recognition of the invention of electronic particle detectors at CERN. The plaque was unveiled by Anderson and Georges Charpak, the Nobel-prize winning inventor of wire-chamber technology at CERN.

Modern electronic materials

CERN Document Server

Watkins, John B

2013-01-01

Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

Analysis of Mig-type electron guns for a 35GHz gyrotron

International Nuclear Information System (INIS)

Barroso, J.J.; Galvao, G.P.

1988-05-01

A 35GHz gyrotron is currently under construction at the Associated Plasma Laboratory of the Institute for Space Research to be used in plasma heating and noninductive current drive experiments. A critical component of the device is the electrooptical system, which must generate a beam with low velocity spread and high transverse energy. One way to decrease the velocity spread is to use laminar beams. For laminar flow, where the trajectories do not cross, the axial component of the space-charge forces changes sign each half cycle models of magnetron injection guns that produce laminar beams are analyzed and procedures for controlling the pitch angle parameter, which defines the transverse-to-axial electron velocity ratio are investigated. (author)

Aligning institutional priorities: engaging house staff in a quality improvement and safety initiative to fulfill Clinical Learning Environment Review objectives and electronic medical record Meaningful Use requirements.

Science.gov (United States)

Flanagan, Meghan R; Foster, Carolyn C; Schleyer, Anneliese; Peterson, Gene N; Mandell, Samuel P; Rudd, Kristina E; Joyner, Byron D; Payne, Thomas H

2016-02-01

House staff quality improvement projects are often not aligned with training institution priorities. House staff are the primary users of inpatient problem lists in academic medical centers, and list maintenance has significant patient safety and financial implications. Improvement of the problem list is an important objective for hospitals with electronic health records under the Meaningful Use program. House staff surveys were used to create an electronic problem list manager (PLM) tool enabling efficient problem list updating. Number of new problems added and house staff perceptions of the problem list were compared before and after PLM intervention. The PLM was used by 654 house staff after release. Surveys demonstrated increased problem list updating (P = .002; response rate 47%). Mean new problems added per day increased from 64 pre-PLM to 125 post-PLM (P house staff in institutional quality and safety initiatives with tangible institutional benefits. Copyright © 2016 Elsevier Inc. All rights reserved.

Electronic components with yttrium- and bismuth-based high-Tc superconductors

International Nuclear Information System (INIS)

Daginnus, M.; Guettler, B.

1992-01-01

This project investigates the fabrication of microwave components by use of high-Tc superconductors. Detailed descriptions are given of the manufacturing and use of active Y-Ba-Cu-O components. The surface resistance of thin films used in high-quality passive microwave components such as resonators and filters is measured and optimized. (orig./MM) [de

Narrow electron injector for ballistic electron spectroscopy

International Nuclear Information System (INIS)

Kast, M.; Pacher, C.; Strasser, G.; Gornik, E.

2001-01-01

A three-terminal hot electron transistor is used to measure the normal energy distribution of ballistic electrons generated by an electron injector utilizing an improved injector design. A triple barrier resonant tunneling diode with a rectangular transmission function acts as a narrow (1 meV) energy filter. An asymmetric energy distribution with its maximum on the high-energy side with a full width at half maximum of ΔE inj =10 meV is derived. [copyright] 2001 American Institute of Physics

Combined 4-component and relativistic pseudopotential study of ThO for the electron electric dipole moment search.

Science.gov (United States)

Skripnikov, L V

2016-12-07

A precise theoretical study of the electronic structure of heavy atom diatomic molecules is of key importance to interpret the experiments in the search for violation of time-reversal (T) and spatial-parity (P) symmetries of fundamental interactions in terms of the electron electric dipole moment, eEDM, and dimensionless constant, k T,P , characterizing the strength of the T,P-odd pseudoscalar-scalar electron-nucleus neutral current interaction. The ACME collaboration has recently improved limits on these quantities using a beam of ThO molecules in the electronic H 3 Δ 1 state [J. Baron et al., Science 343, 269 (2014)]. We apply the combined direct relativistic 4-component and two-step relativistic pseudopotential/restoration approaches to a benchmark calculation of the effective electric field, E eff , parameter of the T,P-odd pseudoscalar-scalar interaction, W T,P , and hyperfine structure constant in Δ13 state of the ThO molecule. The first two parameters are required to interpret the experimental data in terms of the eEDM and k T,P constant. We have investigated the electron correlation for all of the 98 electrons of ThO simultaneously up to the level of the coupled cluster with single, double, and noniterative triple amplitudes, CCSD(T), theory. Contributions from iterative triple and noniterative quadruple cluster amplitudes for the valence electrons have been also treated. The obtained values are E eff = 79.9 GV/cm, W T,P = 113.1 kHz. The theoretical uncertainty of these values is estimated to be about two times smaller than that of our previous study [L. V. Skripnikov and A. V. Titov, J. Chem. Phys., 142, 024301 (2015)]. It was found that the correlation of the inner- and outer-core electrons contributes 9% to the effective electric field. The values of the molecule frame dipole moment of the Δ13 state and the H 3 Δ 1 →X 1 Σ + transition energy of ThO calculated within the same methods are in a very good agreement with the experiment.

Simulation of electromagnetic aggression on components

International Nuclear Information System (INIS)

Adoun, G.; Coumar, O.

1997-01-01

Numerical simulation techniques can be used for studying the behaviour of electronic components exposed to electromagnetic aggression. This article discusses CW analysis on a CMOS-technology logic NAND gate under electromagnetic aggression of different amplitudes (2.5 V 5 V), frequencies (100 MHz and 1 GHz) and phase. Numerical simulations were conducted using three codes: Spice code was used for solving electronic circuits, and the Atlas and Dessis codes were used for examining internal component behaviour. (authors)

Analytical energy gradient for the two-component normalized elimination of the small component method

Energy Technology Data Exchange (ETDEWEB)

Zou, Wenli; Filatov, Michael; Cremer, Dieter, E-mail: dcremer@smu.edu [Computational and Theoretical Chemistry Group (CATCO), Department of Chemistry, Southern Methodist University, 3215 Daniel Ave, Dallas, Texas 75275-0314 (United States)

2015-06-07

The analytical gradient for the two-component Normalized Elimination of the Small Component (2c-NESC) method is presented. The 2c-NESC is a Dirac-exact method that employs the exact two-component one-electron Hamiltonian and thus leads to exact Dirac spin-orbit (SO) splittings for one-electron atoms. For many-electron atoms and molecules, the effect of the two-electron SO interaction is modeled by a screened nucleus potential using effective nuclear charges as proposed by Boettger [Phys. Rev. B 62, 7809 (2000)]. The effect of spin-orbit coupling (SOC) on molecular geometries is analyzed utilizing the properties of the frontier orbitals and calculated SO couplings. It is shown that bond lengths can either be lengthened or shortened under the impact of SOC where in the first case the influence of low lying excited states with occupied antibonding orbitals plays a role and in the second case the jj-coupling between occupied antibonding and unoccupied bonding orbitals dominates. In general, the effect of SOC on bond lengths is relatively small (≤5% of the scalar relativistic changes in the bond length). However, large effects are found for van der Waals complexes Hg{sub 2} and Cn{sub 2}, which are due to the admixture of more bonding character to the highest occupied spinors.

Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting

International Nuclear Information System (INIS)

Murr, L.E.; Gaytan, S.M.; Ceylan, A.; Martinez, E.; Martinez, J.L.; Hernandez, D.H.; Machado, B.I.; Ramirez, D.A.; Medina, F.; Collins, S.; Wicker, R.B.

2010-01-01

Intermetallic, γ-TiAl, equiaxed, small-grain (∼2 μm) structures with lamellar γ/α 2 -Ti 3 Al colonies with average spacing of 0.6 μm have been fabricated by additive manufacturing using electron beam melting (EBM) of precursor, atomized powder. The residual microindentation (Vickers) hardness (HV) averaged 4.1 GPa, corresponding to a nominal yield strength of ∼1.4 GPa (∼HV/3), and a specific yield strength of 0.37 GPa cm 3 g -1 (for a density of 3.76 g cm -3 ), in contrast to 0.27 GPa cm 3 g -1 for EBM-fabricated Ti-6Al-4V components. These results demonstrate the potential to fabricate near net shape and complex titanium aluminide products directly using EBM technology in important aerospace and automotive applications.

Design and fabrication of circular and rectangular components for electron-cyclotron-resonant heating of tandem mirror experiment-upgrade

International Nuclear Information System (INIS)

Felker, B.; Calderon, M.O.; Chargin, A.K.

1983-01-01

The electron-cyclotron-resonant heating (ECRH) systems of rectangular waveguides on Tandem Mirror Experiment-Upgrade (TMX-U) operated with a overall efficiency of 50%, each system using a 28-GHz, 200-kW pulsed gyrotron. We designed and built four circular-waveguide systems with greater efficiency and greater power-handling capabilities to replace the rectangular waveguides. Two of these circular systems, at the 5-kG second-harmonic heating locations, have a total transmission efficiency of >90%. The two systems at the 10-kG fundamental heating locations have a total transmission efficiency of 80%. The difference in efficiency is due to the additional components required to launch the microwaves in the desired orientation and polarization with respect to magnetic-field lines at the 10-kG points. These systems handle the total power available from each gyrotron but do not have the arcing limitation problem of the rectangular waveguide. Each system requires several complex components. The overall physical layout and the design considerations for the rectangular and circular waveguide components are described here

Design and fabrication of circular and rectangular components for electron-cyclotron-resonant heating of tandem mirror experiment-upgrade

Energy Technology Data Exchange (ETDEWEB)

Felker, B.; Calderon, M.O.; Chargin, A.K.; Coffield, F.E.; Lang, D.D.; Rubert, R.R.; Pedrotti, L.R.; Stallard, B.W.; Gallagher, N.C. Jr.; Sweeney, D.W.

1983-11-18

The electron-cyclotron-resonant heating (ECRH) systems of rectangular waveguides on Tandem Mirror Experiment-Upgrade (TMX-U) operated with a overall efficiency of 50%, each system using a 28-GHz, 200-kW pulsed gyrotron. We designed and built four circular-waveguide systems with greater efficiency and greater power-handling capabilities to replace the rectangular waveguides. Two of these circular systems, at the 5-kG second-harmonic heating locations, have a total transmission efficiency of >90%. The two systems at the 10-kG fundamental heating locations have a total transmission efficiency of 80%. The difference in efficiency is due to the additional components required to launch the microwaves in the desired orientation and polarization with respect to magnetic-field lines at the 10-kG points. These systems handle the total power available from each gyrotron but do not have the arcing limitation problem of the rectangular waveguide. Each system requires several complex components. The overall physical layout and the design considerations for the rectangular and circular waveguide components are described here.

Research Institute for Technical Careers

Science.gov (United States)

Glenn, Ronald L.

1996-01-01

The NASA research grant to Wilberforce University enabled us to establish the Research Institute for Technical Careers (RITC) in order to improve the teaching of science and engineering at Wilberforce. The major components of the research grant are infrastructure development, establishment of the Wilberforce Intensive Summer Experience (WISE), and Joint Research Collaborations with NASA Scientists. (A) Infrastructure Development. The NASA grant has enabled us to improve the standard of our chemistry laboratory and establish the electronics, design, and robotics laboratories. These laboratories have significantly improved the level of instruction at Wilberforce University. (B) Wilberforce Intensive Summer Experience (WISE). The WISE program is a science and engineering bridge program for prefreshman students. It is an intensive academic experience designed to strengthen students' knowledge in mathematics, science, engineering, computing skills, and writing. (C) Joint Collaboration. Another feature of the grant is research collaborations between NASA Scientists and Wilberforce University Scientists. These collaborations have enabled our faculty and students to conduct research at NASA Lewis during the summer and publish research findings in various journals and scientific proceedings.

Electronic emission and electron guns

International Nuclear Information System (INIS)

Roy, Amitava

2010-01-01

This paper reviews the process of electron emission from metal surface. Although electrons move freely in conductors like metals, they normally do not leave the metal without some manipulation. In fact, heating and bombardment are the two primary ways in which electrons are emitted through the use of a heating element behind the cathode (termed thermionic emission) or as a result of bombardment with a beam of electrons, ions, or metastable atoms (termed secondary emission). Another important emission mechanism called Explosive Electron Emission (EEE) is also often used in various High Voltage Pulse Power Systems to generate very high current (few hundreds of kA) pulsed electron beams. The electron gun is the device in that it shoots off a continuous (or pulsed) stream of electrons. A brief idea about the evolution of the electron gun components and their basis of functioning are also discussed. (author)

76 FR 58041 - Certain Digital Televisions Containing Integrated Circuit Devices and Components Thereof; Notice...

Science.gov (United States)

2011-09-19

... Integrated Circuit Devices and Components Thereof; Notice of Institution of Investigation; Institution of... integrated circuit devices and components thereof by reason of infringement of certain claims of U.S. Patent... after importation of certain digital televisions containing integrated circuit devices and components...

3D Printing Multi-Functionality: Embedded RF Antennas and Components

Science.gov (United States)

Shemelya, C. M.; Zemba, M.; Liang, M.; Espalin, D.; Kief, C.; Xin, H.; Wicker, R. B.; MacDonald, E. W.

2015-01-01

Significant research and press has recently focused on the fabrication freedom of Additive Manufacturing (AM) to create both conceptual models and final end-use products. This flexibility allows design modifications to be immediately reflected in 3D printed structures, creating new paradigms within the manufacturing process. 3D printed products will inevitably be fabricated locally, with unit-level customization, optimized to unique mission requirements. However, for the technology to be universally adopted, the processes must be enhanced to incorporate additional technologies; such as electronics, actuation, and electromagnetics. Recently, a novel 3D printing platform, Multi3D manufacturing, was funded by the presidential initiative for revitalizing manufacturing in the USA using 3D printing (America Makes - also known as the National Additive Manufacturing Innovation Institute). The Multi3D system specifically targets 3D printed electronics in arbitrary form; and building upon the potential of this system, this paper describes RF antennas and components fabricated through the integration of material extrusion 3D printing with embedded wire, mesh, and RF elements.

Electronic payment systems

OpenAIRE

Mláka, Michal

2010-01-01

This bachelor thesis analysis issue of electronic payment systems. It discusses their use for payments on the internet and sending funds via e-mail. The first part is devoted to the theoretical definition and legislation of the issuance of electronic money and activities of electronic money institutions. The main part of the work clearly focuses on the use of e-wallets, which is an integral part of electronic payment systems. E-wallet of electronic payment system Moneybookers is considered as...

Information Sharing for Computing Trust Metrics on COTS Electronic Components

National Research Council Canada - National Science Library

McMillon, William J

2008-01-01

.... It is challenging for the DoD to determine whether and how much to trust in COTS components, given uncertainty and incomplete information about the developers and suppliers of COTS components as well...

The art of linear electronics

CERN Document Server

Hood, John Linsley

2013-01-01

The Art of Linear Electronics presents the principal aspects of linear electronics and techniques in linear electronic circuit design. The book provides a wide range of information on the elucidation of the methods and techniques in the design of linear electronic circuits. The text discusses such topics as electronic component symbols and circuit drawing; passive and active semiconductor components; DC and low frequency amplifiers; and the basic effects of feedback. Subjects on frequency response modifying circuits and filters; audio amplifiers; low frequency oscillators and waveform generato

Electron microscopy and forensic practice

Science.gov (United States)

Kotrlý, Marek; Turková, Ivana

2013-05-01

Electron microanalysis in forensic practice ranks among basic applications used in investigation of traces (latents, stains, etc.) from crime scenes. Applying electron microscope allows for rapid screening and receiving initial information for a wide range of traces. SEM with EDS/WDS makes it possible to observe topography surface and morphology samples and examination of chemical components. Physical laboratory of the Institute of Criminalistics Prague use SEM especially for examination of inorganic samples, rarely for biology and other material. Recently, possibilities of electron microscopy have been extended considerably using dual systems with focused ion beam. These systems are applied mainly in study of inner micro and nanoparticles , thin layers (intersecting lines in graphical forensic examinations, analysis of layers of functional glass, etc.), study of alloys microdefects, creating 3D particles and aggregates models, etc. Automated mineralogical analyses are a great asset to analysis of mineral phases, particularly soils, similarly it holds for cathode luminescence, predominantly colour one and precise quantitative measurement of their spectral characteristics. Among latest innovations that are becoming to appear also at ordinary laboratories are TOF - SIMS systems and micro Raman spectroscopy with a resolution comparable to EDS/WDS analysis (capable of achieving similar level as through EDS/WDS analysis).

Leadership in the Management Institutes: An Exploration of the ...

African Journals Online (AJOL)

Leadership in the Management Institutes: An Exploration of the Experiences of Women Directors. Rajib Lochan Dhar. Abstract. As leadership is a key component in meeting the challenges of educational institutes, this study was designed to examine the challenges faced by the female leaders of the management institutes ...

Electronics for Piezoelectric Smart Structures

Science.gov (United States)

Warkentin, D. J.; Tani, J.

1997-01-01

This paper briefly presents work addressing some of the basic considerations for the electronic components used in smart structures incorporating piezoelectric elements. After general remarks on the application of piezoelectric elements to the problem of structural vibration control, three main topics are described. Work to date on the development of techniques for embedding electronic components within structural parts is presented, followed by a description of the power flow and dissipation requirements of those components. Finally current work on the development of electronic circuits for use in an 'active wall' for acoustic noise is introduced.

Slowly moving test charge in two-electron component non-Maxwellian plasma

International Nuclear Information System (INIS)

Ali, S.; Eliasson, B.

2015-01-01

Potential distributions around a slowly moving test charge are calculated by taking into account the electron-acoustic waves in an unmagnetized plasma. Considering a neutralizing background of static positive ions, the supra-thermal hot and cold electrons are described by the Vlasov equations to account for the Kappa (power-law in velocity space) and Maxwell equilibrium distributions. Fourier analysis further leads to the derivation of electrostatic potential showing the impact of supra-thermal hot electrons. The test charge moves slowly in comparison with the hot and cold electron thermal speeds and is therefore shielded by the electrons. This gives rise to a short-range Debye-Hückel potential decaying exponentially with distance and to a far field potential decaying as inverse third power of the distance from the test charge. The results are relevant for both laboratory and space plasmas, where supra-thermal hot electrons with power-law distributions have been observed

Arbitrary amplitude slow electron-acoustic solitons in three-electron temperature space plasmas

International Nuclear Information System (INIS)

Mbuli, L. N.; Maharaj, S. K.; Bharuthram, R.; Singh, S. V.; Lakhina, G. S.

2015-01-01

We examine the characteristics of large amplitude slow electron-acoustic solitons supported in a four-component unmagnetised plasma composed of cool, warm, hot electrons, and cool ions. The inertia and pressure for all the species in this plasma system are retained by assuming that they are adiabatic fluids. Our findings reveal that both positive and negative potential slow electron-acoustic solitons are supported in the four-component plasma system. The polarity switch of the slow electron-acoustic solitons is determined by the number densities of the cool and warm electrons. Negative potential solitons, which are limited by the cool and warm electron number densities becoming unreal and the occurrence of negative potential double layers, are found for low values of the cool electron density, while the positive potential solitons occurring for large values of the cool electron density are only limited by positive potential double layers. Both the lower and upper Mach numbers for the slow electron-acoustic solitons are computed and discussed

NATO Advanced Study Institute on Physics of New Laser Sources

CERN Document Server

Arecchi, F; Mooradian, Aram; Sona, Alberto

1985-01-01

This volume contains the lectures and seminars presented at the NATO Advanced Study Institute on "Physics of New Laser Sources", the twelfth course of the Europhysics School of Quantum Electronics, held under the supervision of the Quantum Electronics Division of the European Physical Society. The Institute was held at Centro "I Cappuccini" San Miniato, Tuscany, July 11-21, 1984. The Europhysics School of Quantum Electronics was started in 1970 with the aim of providing instruction for young researchers and advanced students already engaged in the area of quantum electronics or for those wishing to switch into this area after working previously in other areas. From the outset, the School has been under the direction of Prof. F. T. Arecchi, then at the University of Pavia, now at the University of Florence, and Dr. D. Roess of Heraeus, Hanau. In 1981, Prof. H. Walther, University of Munich and Max-Planck Institut fur Quantenoptik joined as co-director. Each year the Directors choose a subj~ct of particular int...

NATO Advanced Study Institute on Quantum Magnetism

CERN Document Server

Barbara, Bernard; Sawatzky, G; Stamp, P. C. E

2008-01-01

This book is based on some of the lectures during the Pacific Institute of Theoretical Physics (PITP) summer school on "Quantum Magnetism", held during June 2006 in Les Houches, in the French Alps. The school was funded jointly by NATO, the CNRS, and PITP, and entirely organized by PITP. Magnetism is a somewhat peculiar research field. It clearly has a quantum-mechanical basis – the microsopic exchange interactions arise entirely from the exclusion principle, in conjunction with respulsive interactions between electrons. And yet until recently the vast majority of magnetism researchers and users of magnetic phenomena around the world paid no attention to these quantum-mechanical roots. Thus, eg., the huge ($400 billion per annum) industry which manufactures hard discs, and other components in the information technology sector, depends entirely on room-temperature properties of magnets - yet at the macroscopic or mesoscopic scales of interest to this industry, room-temperature magnets behave entirely classic...

Electron-beam induced conduction in some polymers

International Nuclear Information System (INIS)

Suzuoki, Yasuo; Mizutani, Teruyoshi; Ieda, Masayuki

1976-01-01

The charge signal induced by pulsed electron beam consists of two components, i.e. the fast and the slow components. The slow component which corresponds to carrier transport via shallow traps exhibited an asymmetry with respect to the bias field polarity. The asymmetry revealed that the main carriers which drifted via shallow traps were electrons in PET, both electrons and holes in PEN, and holes in PS. TSC spectra of electron-beam induced electrets proved directly the existence of electron shallow traps in PET and both electron and hole traps in PEN. Their trap energies were 0.1 to 0.2 eV. (auth.)

Financial Denartments Should Quicken Steps of Electronization

Institute of Scientific and Technical Information of China (English)

无

2004-01-01

　　At 2004 China Electronic Finance Forum held in Beijing recently,Pan Xinping, Dean of Software Institute of Graduate Institute of Chinese Academy of Science appealled that China's financial departments should further quicken electronization and establish complete network electronic payment system to offer comprehensive financial service such as checking card, transference and clearance between banks, electronic securities, accounting management,transaction disposal, payment commission and service of report, and establish financial management information system. And it should finish communications between computer systems of all different professional banks, providing strong backing for the development of electronic finance in China.……

Financial Denartments Should Quicken Steps of Electronization

Institute of Scientific and Technical Information of China (English)

无

2004-01-01

@@ At 2004 China Electronic Finance Forum held in Beijing recently,Pan Xinping, Dean of Software Institute of Graduate Institute of Chinese Academy of Science appealled that China's financial departments should further quicken electronization and establish complete network electronic payment system to offer comprehensive financial service such as checking card, transference and clearance between banks, electronic securities, accounting management,transaction disposal, payment commission and service of report, and establish financial management information system. And it should finish communications between computer systems of all different professional banks, providing strong backing for the development of electronic finance in China.

Reliability & availability of wind turbine electrical & electronic components

NARCIS (Netherlands)

Tavner, P.; Faulstich, S.; Hahn, B.; Bussel, van G.J.W.

2010-01-01

Recent analysis of European onshore wind turbine reliability data has shown that whilst wind turbine mechanical subassemblies tend to have relatively low failure rates but long downtimes, electrical and electronic subassemblies have relatively high failure rates and short downtimes. For onshore wind

Nonlinear electron-acoustic rogue waves in electron-beam plasma system with non-thermal hot electrons

Science.gov (United States)

Elwakil, S. A.; El-hanbaly, A. M.; Elgarayh, A.; El-Shewy, E. K.; Kassem, A. I.

2014-11-01

The properties of nonlinear electron-acoustic rogue waves have been investigated in an unmagnetized collisionless four-component plasma system consisting of a cold electron fluid, non-thermal hot electrons obeying a non-thermal distribution, an electron beam and stationary ions. It is found that the basic set of fluid equations is reduced to a nonlinear Schrodinger equation. The dependence of rogue wave profiles on the electron beam and energetic population parameter are discussed. The results of the present investigation may be applicable in auroral zone plasma.

Dissociative electron attachment and electronic excitation in Fe(CO)5

Czech Academy of Sciences Publication Activity Database

Allan, M.; Lacko, M.; Papp, P.; Matejčík, Š.; Zlatar, M.; Fabrikant, I. I.; Kočišek, Jaroslav; Fedor, Juraj

2018-01-01

Roč. 20, č. 17 (2018), s. 11692-11701 ISSN 1463-9076 R&D Projects: GA ČR GA17-04844S Grant - others:COST(XE) CM1301 Institutional support: RVO:61388955 Keywords : electrons * FEBID * electronic excitation Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 4.123, year: 2016

Annual report of the Jozef Stefan Institute for 1987

International Nuclear Information System (INIS)

Gams, M.

1988-06-01

This report presents the main features of the Josef Stefan Institute work in the course of the year 1987. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, nuclear, solid state and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy and process control and professional electronics), reactor engineering and safety, and applied mathematics and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.). 1260 refs

Annual Report of the Jozef Stefan Institute for 1989

International Nuclear Information System (INIS)

Gams, M.

1990-05-01

This report presents the main features of the Josef Stefan Institute work in the course of the year 1989. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, nuclear, condensed matter, thin films and surfaces, solid states and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy process control and professional electronics), reactor enineering and safety, and applied mathematics, and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.) 151 refs.; 69 figs., 8 tabs

Assessment of learning components of management training course ...

African Journals Online (AJOL)

Assessment of learning components of any training course provides a benchmark through which training institutions or organizers could assess the effectiveness of the training. The study assessed learning components of agricultural research management training course organized for senior research managers in Nigeria.

Electron cyclotron emission spectroscopy on thermonuclear plasmas

International Nuclear Information System (INIS)

Tubbing, B.J.D.

1987-01-01

Analysis of electron cyclotron emission (ECE) enables one to infer the radial profile of the electron temperature in tokamaks. The Dutch FOM institute for plasma physics has designed, built, installed and operated a grating polychromator for ECE measurements at JET. This thesis deals with a few instrumental aspects of this project and with applications of ECE measurements in tokamak physics studies. Ch. 3 and 4 deal with the wave transport in ECE systems. In Ch. 3 a method is developed to infer the mode conversion, which is a source for transmission losses, in a waveguide component from the antenna pattern of its exit aperture. In Ch. 4 the design and manufacture of the waveguide transition system to the grating polychromator are described. In Ch. 5 a method is reported for calibration of the spectrometers, based on the use of a microwave source which simulates a large area blackbody of very high temperature. The feasibility of the method is tested by applying it to two different ECE systems. In Ch. 6 a study of heat pulse propagation in tokamak plasma's, based on measurement of the electron temperature with the grating polychromator, is presented. 105 refs.; 48 figs.; 8 tabs

Investigations into High Temperature Components and Packaging

Energy Technology Data Exchange (ETDEWEB)

Marlino, L.D.; Seiber, L.E.; Scudiere, M.B.; M.S. Chinthavali, M.S.; McCluskey, F.P.

2007-12-31

The purpose of this report is to document the work that was performed at the Oak Ridge National Laboratory (ORNL) in support of the development of high temperature power electronics and components with monies remaining from the Semikron High Temperature Inverter Project managed by the National Energy Technology Laboratory (NETL). High temperature electronic components are needed to allow inverters to operate in more extreme operating conditions as required in advanced traction drive applications. The trend to try to eliminate secondary cooling loops and utilize the internal combustion (IC) cooling system, which operates with approximately 105 C water/ethylene glycol coolant at the output of the radiator, is necessary to further reduce vehicle costs and weight. The activity documented in this report includes development and testing of high temperature components, activities in support of high temperature testing, an assessment of several component packaging methods, and how elevated operating temperatures would impact their reliability. This report is organized with testing of new high temperature capacitors in Section 2 and testing of new 150 C junction temperature trench insulated gate bipolar transistor (IGBTs) in Section 3. Section 4 addresses some operational OPAL-GT information, which was necessary for developing module level tests. Section 5 summarizes calibration of equipment needed for the high temperature testing. Section 6 details some additional work that was funded on silicon carbide (SiC) device testing for high temperature use, and Section 7 is the complete text of a report funded from this effort summarizing packaging methods and their reliability issues for use in high temperature power electronics. Components were tested to evaluate the performance characteristics of the component at different operating temperatures. The temperature of the component is determined by the ambient temperature (i.e., temperature surrounding the device) plus the

PERFORMANCE OF ALTERNATIVE COMPONENT PRICING SYSTEMS FOR PORK

OpenAIRE

Brorsen, B. Wade; Akridge, Jay T.; Boland, Michael A.; Mauney, Sean; Forrest, John C.

1998-01-01

One method of implementing value-based marketing is a component pricing system. This research develops and evaluates alternative component pricing systems for pork. Two electronic technologies for estimating carcass components (optical probe and electromagnetic scanner) were evaluated on two sets of data representing different populations. Model accuracy increased as additional components were added.

Laboratory Handbook Electronics

CERN Multimedia

1966-01-01

Laboratory manual 1966 format A3 with the list of equipment cables, electronic tubes, chassis, diodes transistors etc. One of CERN's first material catalogue for construction components for mechanical and electronic chassis.

77 FR 22803 - Certain Audiovisual Components and Products Containing the Same; Institution of Investigation...

Science.gov (United States)

2012-04-17

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-837] Certain Audiovisual Components and Products... importation of certain audiovisual components and products containing the same by reason of infringement of... importation, or the sale within the United States after importation of certain audiovisual components and...

Physicians' acceptance of electronic medical records exchange: an extension of the decomposed TPB model with institutional trust and perceived risk.

Science.gov (United States)

Hsieh, Pi-Jung

2015-01-01

Electronic medical records (EMRs) exchange improves clinical quality and reduces medical costs. However, few studies address the antecedent factors of physicians' intentions to use EMR exchange. Based on institutional trust and perceived risk integrated with the decomposed theory of planned behavior (TPB) model, we propose a theoretical model to explain the intention of physicians to use an EMR exchange system. We conducted a field survey in Taiwan to collect data from physicians who had experience using the EMR exchange systems. A valid sample of 191 responses was collected for data analysis. To test the proposed research model, we employed structural equation modeling using the partial least squares method. The study findings show that the following five factors have a significant influence on the physicians' intentions to use EMR exchange systems: (a) attitude; (b) subjective norm; (c) perceived behavior control; (d) institutional trust; and (e) perceived risk. These five factors are predictable by perceived usefulness, perceived ease of use, and compatibility, interpersonal and governmental influence, facilitating conditions and self-efficacy, situational normality and structural assurance, and institutional trust, respectively. The results also indicate that institutional trust and perceived risk integrated with the decomposed TPB model improve the prediction of physician's intentions to use EMR exchange. The results of this study indicate that our research model effectively predicts the intention of physicians to use EMR exchange, and provides valuable implications for academics and practitioners. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Microwave measurement test results of circular waveguide components for electron cyclotron resonant heating (ECRH) of the Tandem Mirror Experiment-Upgrade (TMX-U)

International Nuclear Information System (INIS)

Williams, C.W.; Rubert, R.R.; Coffield, F.E.; Felker, B.; Stallard, B.W.; Taska, J.

1983-01-01

Development of high-power components for electron cyclotron resonant heating (ECRH) applications requires extensive testing. In this paper we describe the high-power testing of various circular waveguide components designed for application on the Tandem Mirror Experiment-Upgrade (TMX-U). These include a 2.5-in. vacuum valve, polarizing reflectors, directional couplers, mode converters, and flexible waveguides. All of these components were tested to 200 kW power level with 40-ms pulses. Cold tests were used to determine field distribution. The techniques used in these tests are illustrated. The new high-power test facility at Lawrence Livermore National Laboratory (LLNL) is described and test procedures are discussed. We discuss the following test results: efficiency at high power of mode converters, comparison of high power vs low power for waveguide components, and full power tests of the waveguide system. We also explain the reasons behind selection of these systems for use on TMX-U

The history and development of Australia's Black Dog Institute

Directory of Open Access Journals (Sweden)

Gordon Parker

2013-03-01

Full Text Available OBJECTIVE: To overview the development of the Sydney-based Black Dog Institute. METHODS: The strengths and limitations of the Institute's predecessor (the Mood Disorders Unit gave way to a more ambitious Black Dog Institute, and this article gives an overview of the Institute's structural and functional components. RESULTS: It is argued that the Institute serves as a model for modern psychiatric service delivery. CONCLUSIONS: The Institute's model of linking clinical, research, education and community activities to advance the understanding, diagnosis and management of mood disorders is detailed for wider consideration.

Upgrade of the ISIR L-band linac at Osaka University and stabilization of the electron beam

International Nuclear Information System (INIS)

Kato, R.; Kashiwagi, S.; Yamamoto, T.; Suemine, S.; Isoyama, G.

2004-01-01

The L-band electron linac at the Institute of Scientific and Industrial Research, Osaka University has been extensively remodeled to realize high operational stability and reproducibility for advanced studies in beam science and technology. Almost all the peripheral components are replaced with new ones. The modification of the linac has been completed and commissioning is now in progress. In this paper, we will report performance and characteristics of the linac after modification. (author)

Design, construction and installation of the electromechanical components of the current control of filament of the Pelletron Electron Accelerator

International Nuclear Information System (INIS)

Aguilar J, R.A.; Valdovinos A, M.; Lopez V, H.

1985-01-01

For the operation of the Pelletron electron accelerator is required to have control of the filament current. For it was designed, built and installed an electromechanical system located in the Acceleration Unit inside the Accelerator tank and operated from the Control console. All the components located inside the tank operated under the following conditions: Pressure: until 7.03 Kg/cm 2 ; High voltage: 10 6 V (only the insulating arrow); Atmosphere: mixture of N 2 and CO 2 or SF 6 . (Author)

Electronic Commerce: Canadian Community Colleges and Institutes of Technology.

Science.gov (United States)

Association of Canadian Community Colleges.

This paper reports on the Canadian college system's collaboration with industry and community services in the development and delivery of non-credit e-commerce courses offered through continuing education departments at community colleges and institutes of technology. The paper argues that, in today's changing economy, the accelerated need for…

THE INSTITUTIONAL CONTENT OF THE HUMAN CAPITAL OF THE NATIONAL ECONOMY

Directory of Open Access Journals (Sweden)

Viktoriia Kolomiiets

2017-12-01

Full Text Available In the current conditions of transformation of traditional institutes and institutions and formation of a new institutional state, the institutional content of human capital as the most valuable resource of the economy changes. Along with the existing research, the transformation of the old institutional system and the emergence of new institutes and institutions require an analysis of the updated institutional content of the human capital of the national economy. The purpose of the paper – to reveal the institutional content of the human capital of the national economy. In the process of work, the following tasks are set and solved: to study economic and institutional conditions of functioning of human capital, to determine the material content of human capital in the context of institutionalism and the process of institutionalization of human capital. Methodology. A methodological basis is a dialectical approach. To study the institutional content of human capital, abstract-logical and systemstructural methods are used. Results. Economic conditions for the formation and functioning of human capital are determined by the instability of the economic situation in Ukraine caused by the fall in the gross domestic product, the inappropriate growth of prices and wages, inflation, and military-political confrontation. Institutional conditions of Ukraine accumulate the following components: those that remained from the previous regimes; transformed components, imported components. The large financial capital, business structures, shadow economy, public sector of the country interact on a fundamentally different institutional basis. The main factor characterizing the institutional development of our country is the uncertainty of limits of institutionalization. The essential institutional conditions for the functioning of human capital are also the absence of a positive or negative experience of existence, coexistence of certain institutions in a

Formation of stable, high-beta, relativistic-electron plasmas using electron cyclotron heating

International Nuclear Information System (INIS)

Guest, G.E.; Miller, R.L.

1988-01-01

A one-dimensional, steady-state, relativistic Fokker-Planck model of electron cyclotron heating (ECH) is used to analyse the heating kinetics underlying the formation of the two-component hot-electron plasmas characteristic of ECH in magnetic mirror configurations. The model is first applied to the well diagnosed plasmas obtained in SM-1 and is then used to simulate the effective generation of relativistic electrons by upper off-resonant heating (UORH), as demonstrated empirically in ELMO. The characteristics of unstable whistler modes and cyclotron maser modes are then determined for two-component hot-electron plasmas sustained by UORH. Cyclotron maser modes are shown to be strongly suppressed by the colder background electron species, while the growth rates of whistler modes are reduced by relativistic effects to levels that may render them unobservable, provided the hot-electron pressure anisotropy is below an energy dependent threshold. (author). 29 refs, 10 figs, 1 tab

Investigation of relative arrival time distributions of EAS electron and muon component with the KASCADE central detector

International Nuclear Information System (INIS)

Hafemann, W.; Haeusler, R.; Rebel, H.; Mathes, H.J.

2000-01-01

The central detector of the KASCADE experiment is equipped with two layers of scintillation detectors with different area coverage. The scintillators of both detector systems have a good timing resolution of about 1.6 ns. With these two arrangements we performed extensive measurements of the arrival time differences at different energy thresholds of the electron and the muon component of EAS. The observed time structure of the shower profile is classified according to different EAS parameters. We furthermore present an analysis and comparism based on detailed MC simulations of the shower development. This comparism shows good agreement between experimental data and the expected behaviour of the different time distributions. (orig.)

Hybrid 3D Printing of Soft Electronics.

Science.gov (United States)

Valentine, Alexander D; Busbee, Travis A; Boley, John William; Raney, Jordan R; Chortos, Alex; Kotikian, Arda; Berrigan, John Daniel; Durstock, Michael F; Lewis, Jennifer A

2017-10-01

Hybrid 3D printing is a new method for producing soft electronics that combines direct ink writing of conductive and dielectric elastomeric materials with automated pick-and-place of surface mount electronic components within an integrated additive manufacturing platform. Using this approach, insulating matrix and conductive electrode inks are directly printed in specific layouts. Passive and active electrical components are then integrated to produce the desired electronic circuitry by using an empty nozzle (in vacuum-on mode) to pick up individual components, place them onto the substrate, and then deposit them (in vacuum-off mode) in the desired location. The components are then interconnected via printed conductive traces to yield soft electronic devices that may find potential application in wearable electronics, soft robotics, and biomedical devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Insights into the redox components of dissolved organic matters during stabilization process.

Science.gov (United States)

Yuan, Ying; Xi, Bei-Dou; He, Xiao-Song; Ma, Yan; Zhang, Hui; Li, Dan; Zhao, Xin-Yu

2018-05-01

The changes of dissolved organic matter (DOM) components during stabilization process play significant effects on its redox properties but are little reported. Composting is a stabilization process of DOM, during which both the components and electron transfer capacities (ETCs) of DOM change. The redox components within compost-derived DOM during the stabilization process are investigated in this study. The results show that compost-derived DOM contained protein-like, fulvic-like, and humic-like components. The protein-like component decreases during composting, whereas the fulvic- and humic-like components increase during the process. The electron-donating capacity (EDC), electron-accepting capacity (EAC), and ETC of compost-derived DOM all increase during composting but their correlations with the components presented significant difference. The humic-like components were the main functional component responsible for both EDC and ETC, whereas the protein- and fluvic-like components show negative effects with the EAC, EDC, and ETC, suggesting that the components within DOM have specific redox properties during the stabilization process. These findings are very meaningful for better understanding the geochemical behaviors of DOM in the environment.

Spaceradiation effects on electronics

International Nuclear Information System (INIS)

Salminen, Arto.

1989-01-01

The failure mechanisms and radiation hardening of electronic devices in spaceborne environment are considered. Radiation hardened components and radiation shielding of electronics are described. Because of the radiation belts and particle radiation from the Sun, the near earth space is hostile to electronics. Besides cosmic radiation represents fully random failure source, against which redundant methods have to be applied. Failures caused by absorbed doses can be dealt with component selection, layout adjustment and addition of absorber. Prepairing for radiation damage presupposes the calculation of absorbed doses and SEU-cross sections from flight parameters. Thus the expected lifetime for spacecraft can be estimated. The above observations belong to the domain of normal routine operation in space electronic engineering and product assurance, which has a crucial meaning in space technology. Devices are to operate years without failure in demanding conditions. The reliable products are result of careful consideration of space environment from the beginning of device design. This applies especially to component selection and circuit design

FEL components and diagnostics

International Nuclear Information System (INIS)

Carr, R.

1997-01-01

FEL hardware includes undulators, alignment systems, electron beam diagnostics, and mechanical and vacuum systems. While most FEL close-quote s employ conventional undulators, there is some interest in novel types, particularly where conventional designs cannot be used, as at very short periods and high fields. For these areas, superconducting technology is indicated. The most serious issue facing long FEL undulators is that of alignment; mechanical techniques may not be accurate enough, and beam-based strategies must be considered. To maintain alignment and control the electron trajectory, beam position monitors with micron precision are required. Beam size monitors are also required to assure control of emittance. The talks given in the working group sessions touch on undulators, alignment, and electron beam diagnostics, and they are summarized here. copyright 1997 American Institute of Physics

Metallurgical Laboratory and Components Testing

Data.gov (United States)

Federal Laboratory Consortium — In the field of metallurgy, TTC is equipped to run laboratory tests on track and rolling stock components and materials. The testing lab contains scanning-electron,...

Manufacturing of Liquid-Embedded Elastomers for Stretchable Electronics

Science.gov (United States)

Kramer, Rebecca; Majidi, Carmel; Weaver, James; Wood, Robert

2013-03-01

Future generations of robots, electronics, and assistive medical devices will include systems that are soft, elastically deformable, and may adapt their functionality in unstructured environments. This will require soft active materials for power circuits and sensing of deformation and contact pressure. As the demand for increased elasticity of electrical components heightens, the challenges for functionality revert to basic questions of fabrication, materials, and design. Several designs for soft sensory skins (including strain, pressure and curvature sensors) based on a liquid-embedded-elastomer approach have been developed. This talk will highlight new ``soft MEMS'' manufacturing techniques based on wetting behavior between gallium-indium alloys and elastomers with varying microtextured surface topography. Supported by Harvard MRSEC and the Wyss Institute

Annual report of the Jozef Stefan Institute for 1988

International Nuclear Information System (INIS)

Gams, M.

1989-07-01

This report presents the main features of the Jozef Stefan Institute work in the course of the year 1988. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, unclear, condensed matter, thin films and surfaces, solid states and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy and process control and professional electronics), reactor engineering and safety, and applied mathematics and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.). 1380 refs.; 43 figs.; 8 tabs.; 14 diags

Electronic Structure Approach to Tunable Electronic Properties of Hybrid Organic-Inorganic Perovskites

Science.gov (United States)

Liu, Garnett; Huhn, William; Mitzi, David B.; Kanai, Yosuke; Blum, Volker

We present a study of the electronic structure of layered hybrid organic-inorganic perovskite (HOIP) materials using all-electron density-functional theory. Varying the nature of the organic and inorganic layers should enable systematically fine-tuning the carrier properties of each component. Using the HSE06 hybrid density functional including spin-orbit coupling (SOC), we validate the principle of tuning subsystem-specific parts of the electron band structures and densities of states in CH3NH3PbX3 (X=Cl, Br, I) compared to a modified organic component in layered (C6H5C2H4NH3) 2PbX4 (X=Cl, Br, I) and C20H22S4N2PbX4 (X=Cl, Br, I). We show that tunable shifts of electronic levels indeed arise by varying Cl, Br, I as the inorganic components, and CH3NH3+ , C6H5C2H4NH3+ , C20H22S4N22 + as the organic components. SOC is found to play an important role in splitting the conduction bands of the HOIP compounds investigated here. The frontier orbitals of the halide shift, increasing the gap, when Cl is substituted for Br and I.

Kinetic and electron-electron energies for convex sums of ground state densities with degeneracies and fractional electron number

Energy Technology Data Exchange (ETDEWEB)

Levy, Mel, E-mail: ayers@mcmaster.ca, E-mail: mlevy@tulane.edu [Department of Chemistry, Duke University, Durham, North Carolina 27708 (United States); Department of Physics, North Carolina A and T State University, Greensboro, North Carolina 27411 (United States); Department of Chemistry, Tulane University, New Orleans, Louisiana 70118 (United States); Anderson, James S. M.; Zadeh, Farnaz Heidar; Ayers, Paul W., E-mail: ayers@mcmaster.ca, E-mail: mlevy@tulane.edu [Department of Chemistry and Chemical Biology, McMaster University, Hamilton, Ontario (Canada)

2014-05-14

Properties of exact density functionals provide useful constraints for the development of new approximate functionals. This paper focuses on convex sums of ground-level densities. It is observed that the electronic kinetic energy of a convex sum of degenerate ground-level densities is equal to the convex sum of the kinetic energies of the individual degenerate densities. (The same type of relationship holds also for the electron-electron repulsion energy.) This extends a known property of the Levy-Valone Ensemble Constrained-Search and the Lieb Legendre-Transform refomulations of the Hohenberg-Kohn functional to the individual components of the functional. Moreover, we observe that the kinetic and electron-repulsion results also apply to densities with fractional electron number (even if there are no degeneracies), and we close with an analogous point-wise property involving the external potential. Examples where different degenerate states have different kinetic energy and electron-nuclear attraction energy are given; consequently, individual components of the ground state electronic energy can change abruptly when the molecular geometry changes. These discontinuities are predicted to be ubiquitous at conical intersections, complicating the development of universally applicable density-functional approximations.

Radiotechnical Institute activity in the linac field

International Nuclear Information System (INIS)

Murin, B.P.

1976-01-01

For many years, the Radiotechnical Institute has been involved in a number of projects aimed at constructing linear accelerators for protons or electrons. This report summarizes the experience gained and covers 1) some problems of developing linacs to serve as meson or neutron generators, 2) results of study of a linac with asymmetric alternating phase focusing, and 3) electron linac projects. (author)

The geographic dimensions of institutions

NARCIS (Netherlands)

Bhupatiraju, S.

2014-01-01

In this paper we examine the role of institutions relative to economic performance, absolute geography and financial performance of a country. In order to do this, we use the spatial principal component analysis and a spatial canonical correlation analysis to obtain multi-dimensional measure of

Capacitor ageing in electronic devices

Directory of Open Access Journals (Sweden)

Richard B. N. Vital

2015-10-01

Full Text Available The moment when an electronic component doesn’t work like requirements, previously established is a task that need to be considered since began of a system design. However, the use of different technologies, operating under several environmental conditions, makes a component choice a complex step in system design. This paper analyzes the effects that ageing phenomenon of capacitors may introduce in electronic devices operation. For this reason, reliability concepts, processes and mechanism of degradation are presented. Additionally, some mathematical models are presented to assist maintenance activities or component replacement. The presented approach compares the operability of intact and aged components.

Practical electronics handbook

CERN Document Server

Sinclair, Ian R

1988-01-01

Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

Quasilinear analysis of loss-cone driven weakly relativistic electron cyclotron maser instability

International Nuclear Information System (INIS)

Ziebell, L.F.; Yoon, P.H.

1995-01-01

This paper presents a quasilinear analysis of the relativistic electron cyclotron maser instability. Two electron populations are assumed: a low-temperature background component and a more energetic loss-cone population. The dispersion relation is valid for any ratio of the energetic to cold populations, and includes thermal and relativistic effects. The quasilinear analysis is based upon an efficient kinetic moment method, in which various moment equations are derived from the particle kinetic equation. A model time-dependent loss-cone electron distribution function is assumed, which allows one to evaluate the instantaneous linear growth rate as well as the moment kinetic equations. These moment equations along with the wave kinetic equation form a fully self-consistent set of equations which governs the evolution of the particles as well as unstable waves. This set of equations is solved with physical parameters typical of the earth's auroral zone plasma. copyright 1995 American Institute of Physics

Discrimination of chicken seasonings and beef seasonings using electronic nose and sensory evaluation.

Science.gov (United States)

Tian, Huaixiang; Li, Fenghua; Qin, Lan; Yu, Haiyan; Ma, Xia

2014-11-01

This study examines the feasibility of electronic nose as a method to discriminate chicken and beef seasonings and to predict sensory attributes. Sensory evaluation showed that 8 chicken seasonings and 4 beef seasonings could be well discriminated and classified based on 8 sensory attributes. The sensory attributes including chicken/beef, gamey, garlic, spicy, onion, soy sauce, retention, and overall aroma intensity were generated by a trained evaluation panel. Principal component analysis (PCA), discriminant factor analysis (DFA), and cluster analysis (CA) combined with electronic nose were used to discriminate seasoning samples based on the difference of the sensor response signals of chicken and beef seasonings. The correlation between sensory attributes and electronic nose sensors signal was established using partial least squares regression (PLSR) method. The results showed that the seasoning samples were all correctly classified by the electronic nose combined with PCA, DFA, and CA. The electronic nose gave good prediction results for all the sensory attributes with correlation coefficient (r) higher than 0.8. The work indicated that electronic nose is an effective method for discriminating different seasonings and predicting sensory attributes. © 2014 Institute of Food Technologists®

COMPREHENSION AS A COMPONENT OF THE FUTURE LEADER’S PROFESSIONAL COMPETENCE IN THE FIELD OF INNOVATIVE MANAGEMENT OF EDUCATIONAL INSTITUTION (AS FAR AS THE LEADERS` ACTIVITY AT EDUCATIONAL INSTITUTIONS OF THE CARPATHIANS

Directory of Open Access Journals (Sweden)

Natalia Sas

2015-04-01

Full Text Available The author analyses philosophical, linguistic, psychological, sociological and management approaches to the content of comprehension and peculiarities of comprehension as a constituent of the future leader`s professional competence in the innovative management of the educational institution. The problem under consideration is sure to be relevant due to the question elaboration connected with the implementation of the innovative management means the exact awareness of the specific character of practical application of the new management forms at the educational institution. The question of general terms is a constituent of the problem of comprehension. According to the national Frame of skills competence is a person`s ability to perform particular kind of activity via knowledge, comprehension, skills, values and other personal qualities. In other words it is a dynamic combination of knowledge, comprehension, skills, values and other personal qualities. From this it can be concluded that comprehension alongside knowledge, skills and values is the component of innovative management competence. Psychology treats comprehension as a complex analytic-synthatic mental activity which tends to reveal and realise the inner essence of the objects, processes and phenomena as well as links, relations, and dependence reflected in it. In the innovative management of educational institutions management decisions and problem solving activity, setting new objectives, tasks and methods presuppose the necessity for changing the leader`s way of thinking. The subject of comprehensive sociology is adeliberateaction, connected with the subjective predictable sense. The development of the innovative e management competence is determined by the appropriate realization of all the aspects of the professional management. The Carpathians are famous for natural, ecological, technical, organizational, economic, social, cultural and ethnic peculiarities. The specific ones are

Decal electronics for printed high performance cmos electronic systems

KAUST Repository

Hussain, Muhammad Mustafa

2017-11-23

High performance complementary metal oxide semiconductor (CMOS) electronics are critical for any full-fledged electronic system. However, state-of-the-art CMOS electronics are rigid and bulky making them unusable for flexible electronic applications. While there exist bulk material reduction methods to flex them, such thinned CMOS electronics are fragile and vulnerable to handling for high throughput manufacturing. Here, we show a fusion of a CMOS technology compatible fabrication process for flexible CMOS electronics, with inkjet and conductive cellulose based interconnects, followed by additive manufacturing (i.e. 3D printing based packaging) and finally roll-to-roll printing of packaged decal electronics (thin film transistors based circuit components and sensors) focusing on printed high performance flexible electronic systems. This work provides the most pragmatic route for packaged flexible electronic systems for wide ranging applications.

VISA Final Report: Fully Integrated Power Electronic Systems in Automotive Electronics

NARCIS (Netherlands)

Waffenschmidt, E.

2011-01-01

This report summarizes the activities related to the public funded project “Vollintegrierte leistungselektronische Systeme in der Automobilelektronik – VISA” (Fully Integrated Power Electronic Systems in Automotive Electronics). Aim of the project is to investigate the integration of components into

DELSY project: status and development Dubna Electron Synchrotron

CERN Document Server

Balalykin, N; Bykovsky, V

2003-01-01

The DELSY (Dubna Electron Synchrotron) project is under development at the Joint Institute for Nuclear Research. It is based on an acceleration facility donated to the Joint Institute for Nuclear Research by the Institute for Nuclear and High Energy Physics (NIKHEF, Amsterdam). The NIKHEF accelerator facility consists of the linear electron accelerator MEA, which has an electron energy of 700 MeV, and the electron storage ring AmPS, with a maximum energy of 900 MeV and a beam current of 200 mA. There are three phases to the construction of the DELSY facility. Phase I will be accomplished with the construction of a complex of free-electron lasers covering continuously the spectrum from the far infrared down to the ultraviolet (approx 150 nm). Phase II will be accomplished with the commissioning of the storage ring DELSY. Complete commissioning of the DELSY project will take place after finishing Phase III, the construction of an X-ray free-electron laser. This phase is considered as the ultimate goal of the pr...

Nuclear electronics laboratory manual

International Nuclear Information System (INIS)

1984-05-01

The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

Starting electronics all you need to get a grounding in practical electronics

CERN Document Server

Brindley, Keith

2013-01-01

Starting Electronics is a nine-chapter introductory text to electronics based on feature articles previously published as magazine articles. The opening chapter provides an overview of the fundamentals of electronics. The succeeding chapters present details of some easy-to-do experiments and the current and voltage measurement. The remaining chapters cover some basic components of electronics, including capacitor, integrated circuit, oscillator, filter, diodes, and transistors. This book will prove useful to electronic constructors and students.

The Maplin electronic circuits handbook

CERN Document Server

Tooley, Michael

1990-01-01

The Maplin Electronic Circuits Handbook provides pertinent data, formula, explanation, practical guidance, theory and practical guidance in the design, testing, and construction of electronic circuits. This book discusses the developments in electronics technology techniques.Organized into 11 chapters, this book begins with an overview of the common types of passive component. This text then provides the reader with sufficient information to make a correct selection of passive components for use in the circuits. Other chapters consider the various types of the most commonly used semiconductor

Organizing the Electronic Century

OpenAIRE

Richard N. Langlois

2007-01-01

This paper's title is an echo of Alfred Chandler's (2001) chronicle of the electronics industry, Inventing the Electronic Century. The paper attempts (A) a general reinterpretation of the pattern of technological advance in (American) electronics over the twentieth century and (B) a somewhat revisionist account of the role of organization and institution in that advance. The paper stresses the complex effects of product architecture and intellectual property regime on industrial organization ...

Sequential Proton Loss Electron Transfer in Deactivation of Iron(IV) Binding Protein by Tyrosine Based Food Components.

Science.gov (United States)

Tang, Ning; Skibsted, Leif H

2017-08-02

The iron(IV) binding protein ferrylmyoglobin, MbFe(IV)═O, was found to be reduced by tyrosine based food components in aqueous solution through a sequential proton loss electron transfer reaction mechanism without binding to the protein as confirmed by isothermal titration calorimetry. Dopamine and epinephrine are the most efficient food components reducing ferrylmyoglobin to oxymyoglobin, MbFe(II)O 2 , and metmyoglobin, MbFe(III), as revealed by multivariate curve resolution alternating least-squares with second order rate constants of 33.6 ± 2.3 L/mol/s (ΔH ⧧ of 19 ± 5 kJ/mol, ΔS ⧧ of -136 ± 18 J/mol K) and 228.9 ± 13.3 L/mol/s (ΔH ⧧ of 110 ± 7 kJ/mol, ΔS ⧧ of 131 ± 25 J/mol K), respectively, at pH 7.4 and 25 °C. The other tyrosine based food components were found to reduce ferrylmyoglobin to metmyoglobin with similar reduction rates at pH 7.4 and 25 °C. These reduction reactions were enhanced by protonation of ferrylmyoglobin and facilitated proton transfer at acidic conditions. Enthalpy-entropy compensation effects were observed for the activation parameters (ΔH ⧧ and ΔS ⧧ ), indicating the common reaction mechanism. Moreover, principal component analysis combined with heat map were performed to understand the relationship between density functional theory calculated molecular descriptors and kinetic data, which was further modeled by partial least squares for quantitative structure-activity relationship analysis. In addition, a three tyrosine residue containing protein, lysozyme, was also found to be able to reduce ferrylmyoglobin with a second order rate constant of 66 ± 28 L/mol/s as determined by a competitive kinetic method.

Electronic logic circuits

CERN Document Server

Gibson, J

2013-01-01

Most branches of organizing utilize digital electronic systems. This book introduces the design of such systems using basic logic elements as the components. The material is presented in a straightforward manner suitable for students of electronic engineering and computer science. The book is also of use to engineers in related disciplines who require a clear introduction to logic circuits. This third edition has been revised to encompass the most recent advances in technology as well as the latest trends in components and notation. It includes a wide coverage of application specific integrate

Rippled beam free electron laser amplifier

Science.gov (United States)

Carlsten, Bruce E.

1999-01-01

A free electron laser amplifier provides a scalloping annular electron beam that interacts with the axial electric field of a TM.sub.0n mode. A waveguide defines an axial centerline and, a solenoid arranged about the waveguide produces an axial constant magnetic field within the waveguide. An electron beam source outputs a annular electron beam that interacts with the axial magnetic field to have an equilibrium radius and a ripple radius component having a variable radius with a ripple period along the axial centerline. An rf source outputs an axial electric field that propagates within the waveguide coaxial with the electron beam and has a radial mode that interacts at the electron beam at the equilibrium radius component of the electron beam.

Qualification of electronic components for use in nuclear power plants

International Nuclear Information System (INIS)

Zorrilla, J.; Antonaccio, E; Luraschi, C.; Rodriguez, F.; Ranalli, J.; Ponce, M.; Dotro, R.; Guinda, J.

2013-01-01

There are a large number of instrument subjected to different service condition in a NPP. For instance different instruments can be found working in environment where the dose rate goes from negligible levels up to very harsh radiation levels. When technical specification and or equipment purchasing should be carried out it is possible to find the total leak of qualified instrument. In this context there is a need of dedicated qualification. In this work two different radiation resistance for two different I&C equipment/component were studies. The first I&C equipment was an LVDT (liner variable differential transformer). This equipment was tested while it was actuated in a strong gamma field in order to evaluate possible electromagnetic interferences a number of cycles equivalent to one year of service. After that the component was subjected to accelerated radiation aging and then actuated test under gamma field were carried out. The second I&C component to be tested was an (author)

Attitudinal Analyses of Toleration and Respect, and the Problem of Institutional Applicability

DEFF Research Database (Denmark)

Lægaard, Sune

2010-01-01

have a sufficiently similar meaning when applied to institutions such as the state as to individual persons? The paper presents the standard analyses and explains in what sense they are attitudinal and why the attitudinal component is necessary. It then presents the problem of institutional...... applicability that the attitudinal component brings about: the ascription of the requisite attitudes to institutions in general and the state in particular is problematic since institutions arguably cannot have attitudes of the required kind. This problem is distinguished from other problems, including...... the problem of making sense of political toleration raised by Glen Newey, and some possible responses to the problem are considered, including Peter Jones’ disaggregative response to Newey, all of which are found inadequate. The paper instead proposes that the analysis of institutional toleration and respect...

Asymmetric electron cyclotron emission from superthermal electrons in the TFR Tokamak

International Nuclear Information System (INIS)

1981-03-01

Measurements of electron cyclotron radiation near the fundamental frequency on the high and low magnetic field side of the TFR Tokamak are reported. In the presence of a superthermal electron component the measured intensities are asymmetric. A theoretical explanation based on the combined effects of the electron relativistic mass variation and the 1/R variation of the tokamak magnetic field is discussed

Numerical simulations of the thermionic electron gun for electron-beam welding and micromachining

Czech Academy of Sciences Publication Activity Database

Jánský, Pavel; Zlámal, J.; Lencová, Bohumila; Zobač, Martin; Vlček, Ivan; Radlička, Tomáš

2009-01-01

Roč. 84, č. 2 (2009), s. 357-362 ISSN 0042-207X R&D Projects: GA AV ČR IAA100650805 Institutional research plan: CEZ:AV0Z20650511 Keywords : Numerical simulation * Thermionic emission * Electron gun Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.975, year: 2009

Recovering four-component solutions by the inverse transformation of the infinite-order two-component wave functions

International Nuclear Information System (INIS)

Barysz, Maria; Mentel, Lukasz; Leszczynski, Jerzy

2009-01-01

The two-component Hamiltonian of the infinite-order two-component (IOTC) theory is obtained by a unitary block-diagonalizing transformation of the Dirac-Hamiltonian. Once the IOTC spin orbitals are calculated, they can be back transformed into four-component solutions. The transformed four component solutions are then used to evaluate different moments of the electron density distribution. This formally exact method may, however, suffer from certain approximations involved in its numerical implementation. As shown by the present study, with sufficiently large basis set of Gaussian functions, the Dirac values of these moments are fully recovered in spite of using the approximate identity resolution into eigenvectors of the p 2 operator.

Electromagnetic wave analogue of electronic diode

OpenAIRE

Shadrivov, Ilya V.; Powell, David A.; Kivshar, Yuri S.; Fedotov, Vassili A.; Zheludev, Nikolay I.

2010-01-01

An electronic diode is a nonlinear semiconductor circuit component that allows conduction of electrical current in one direction only. A component with similar functionality for electromagnetic waves, an electromagnetic isolator, is based on the Faraday effect of the polarization state rotation and is also a key component of optical and microwave systems. Here we demonstrate a chiral electromagnetic diode, which is a direct analogue of an electronic diode: its functionality is underpinned by ...

Shelf life of electronic/electrical devices

International Nuclear Information System (INIS)

Polanco, S.; Behera, A.K.

1993-01-01

This paper discusses inconsistencies which exist between various industry practices regarding the determination of shelf life for electrical and electronic components. New methodologies developed to evaluate the shelf life of electrical and electronic components are described and numerous tests performed at Commonwealth Edison Company's Central Receiving Inspection and Testing (CRIT) Facility are presented. Based upon testing and analysis using the Arrhenius methodology and typical materials used in the manufacturing of electrical and electronic components, shelf life of these devices was determined to be indefinite. Various recommendations to achieve an indefinite. Various recommendations to achieve an indefinite shelf life are presented to ultimately reduce inventory and operating costs at nuclear power plants

Energy deposition and thermal effects of runaway electrons in ITER-FEAT plasma facing components

International Nuclear Information System (INIS)

Maddaluno, G.; Maruccia, G.; Merola, M.; Rollet, S.

2003-01-01

The profile of energy deposited by runaway electrons (RAEs) of 10 or 50 MeV in International Thermonuclear Experimental Reactor-Fusion Energy Advanced Tokamak (ITER-FEAT) plasma facing components (PFCs) and the subsequent temperature pattern have been calculated by using the Monte Carlo code FLUKA and the finite element heat conduction code ANSYS. The RAE energy deposition density was assumed to be 50 MJ/m 2 and both 10 and 100 ms deposition times were considered. Five different configurations of PFCs were investigated: primary first wall armoured with Be, with and without protecting CFC poloidal limiters, both port limiter first wall options (Be flat tile and CFC monoblock), divertor baffle first wall, armoured with W. The analysis has outlined that for all the configurations but one (port limiter with Be flat tile) the heat sink and the cooling tube beneath the armour are well protected for both RAE energies and for both energy deposition times. On the other hand large melting (W, Be) or sublimation (C) of the surface layer occurs, eventually affecting the PFCs lifetime

Energy deposition and thermal effects of runaway electrons in ITER-FEAT plasma facing components

Science.gov (United States)

Maddaluno, G.; Maruccia, G.; Merola, M.; Rollet, S.

2003-03-01

The profile of energy deposited by runaway electrons (RAEs) of 10 or 50 MeV in International Thermonuclear Experimental Reactor-Fusion Energy Advanced Tokamak (ITER-FEAT) plasma facing components (PFCs) and the subsequent temperature pattern have been calculated by using the Monte Carlo code FLUKA and the finite element heat conduction code ANSYS. The RAE energy deposition density was assumed to be 50 MJ/m 2 and both 10 and 100 ms deposition times were considered. Five different configurations of PFCs were investigated: primary first wall armoured with Be, with and without protecting CFC poloidal limiters, both port limiter first wall options (Be flat tile and CFC monoblock), divertor baffle first wall, armoured with W. The analysis has outlined that for all the configurations but one (port limiter with Be flat tile) the heat sink and the cooling tube beneath the armour are well protected for both RAE energies and for both energy deposition times. On the other hand large melting (W, Be) or sublimation (C) of the surface layer occurs, eventually affecting the PFCs lifetime.

Electronics engineer's reference book

CERN Document Server

Mazda, F F

1989-01-01

Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

77 FR 23751 - Certain Food Waste Disposers and Components and Packaging Thereof; Institution of Investigation...

Science.gov (United States)

2012-04-20

... States after importation of certain food waste disposers and components and packaging thereof by reason... States after importation of certain food waste disposers and components and packaging thereof by reason... importation of certain food waste disposers and components and packaging thereof that infringe the claim of U...

78 FR 12788 - Certain Electronic Bark Control Collars; Notice of Institution of Investigation; Institution of...

Science.gov (United States)

2013-02-25

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-870] Certain Electronic Bark Control... AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that a complaint and a motion for temporary relief were filed with the U.S. International Trade Commission on...

NATO Advanced Study Institute on Methods in Computational Molecular Physics

CERN Document Server

Diercksen, Geerd

1992-01-01

This volume records the lectures given at a NATO Advanced Study Institute on Methods in Computational Molecular Physics held in Bad Windsheim, Germany, from 22nd July until 2nd. August, 1991. This NATO Advanced Study Institute sought to bridge the quite considerable gap which exist between the presentation of molecular electronic structure theory found in contemporary monographs such as, for example, McWeeny's Methods 0/ Molecular Quantum Mechanics (Academic Press, London, 1989) or Wilson's Electron correlation in moleeules (Clarendon Press, Oxford, 1984) and the realization of the sophisticated computational algorithms required for their practical application. It sought to underline the relation between the electronic structure problem and the study of nuc1ear motion. Software for performing molecular electronic structure calculations is now being applied in an increasingly wide range of fields in both the academic and the commercial sectors. Numerous applications are reported in areas as diverse as catalysi...

Six Sigma Approach to Improve Stripping Quality of Automotive Electronics Component – a case study

Science.gov (United States)

Razali, Noraini Mohd; Murni Mohamad Kadri, Siti; Con Ee, Toh

2018-03-01

Lacking of problem solving skill techniques and cooperation between support groups are the two obstacles that always been faced in actual production line. Inadequate detail analysis and inappropriate technique in solving the problem may cause the repeating issues which may give impact to the organization performance. This study utilizes a well-structured six sigma DMAIC with combination of other problem solving tools to solve product quality problem in manufacturing of automotive electronics component. The study is concentrated at the stripping process, a critical process steps with highest rejection rate that contribute to the scrap and rework performance. The detail analysis is conducted in the analysis phase to identify the actual root cause of the problem. Then several improvement activities are implemented and the results show that the rejection rate due to stripping defect decrease tremendously and the process capability index improved from 0.75 to 1.67. This results prove that the six sigma approach used to tackle the quality problem is substantially effective.

Experimental study of water absorption of electronic components and internal local temperature and humidity into electronic enclosure

DEFF Research Database (Denmark)

Conseil, Helene; Jellesen, Morten Stendahl; Ambat, Rajan

2014-01-01

Corrosion reliability of electronic products is a key factor for electronics industry, and today there is a large demand for performance reliability in large spans of temperature and humidity during day and night shifts. Corrosion failures are still seen due to the effects of temperature, humidity......, differential humidity, and temperature effects simulating day/night, and the use of desiccants....

Electronics pocket book

CERN Document Server

Parr, E A

1981-01-01

Electronics Pocket Book, Fourth Edition is a nonmathematical presentation of the many varied topics covered by electronics. The book tackles electron physics, electronic components (i.e. resistors, capacitors, and conductors), integrated circuits, and the principles of a.c. and d.c. amplifiers. The text also discusses oscillators, digital circuits, digital computers, and optoelectronics (i.e., sensors, emitters, and devices that utilize light). Communications (such as line and radio communications, transmitters, receivers, and digital techniques); the principles and examples of servosystems; a

Improving quality of components and protein preparations of blood plasma by introduction of quality management according to the principles of GMP and ISO 9001 in the blood service institutions with benchmarking effectiveness

Directory of Open Access Journals (Sweden)

Liubchack V.V.

2014-09-01

Full Text Available Aspects of harmonious introduc¬tion of the new standards of quality management in the institutions of blood service were considered. It was proved that it does not contradict to current legislation and significantly increases pathogenic security of blood components and blood products.

Bosch automotive electrics and automotive electronics systems and components, networking and hybrid drive

CERN Document Server

2014-01-01

The significance of electrical and electronic systems has increased considerably in the last few years and this trend is set to continue. The characteristics feature of innovative systems is the fact that they can work together in a network. This requires powerful bus systems that the electronic control units can use to exchange information. Networking and the various bus systems used in motor vehicles are the prominent new topic in the 5th edition of the "Automotive Electric, Automotive Electronics" technical manual. The existing chapters have also been updated, so that this new edition brings the reader up to date on the subjects of electrical and electronic systems in the motor vehicle. Content Electrical and electronical systems – Basic principles of networking - Examples of networked vehicles – Bus systems – Architecture of electronic systems – Mechatronics – Elektronics – Electronic control Units – Software – Sensors – Actuators – Hybrid drives – Vehicle electrical system – Start...

The operational procedure of an electron beam accelerator

International Nuclear Information System (INIS)

Lee, Byung Cheol; Choi, Hwa Lim; Yang, Ki Ho; Han, Young Hwan; Kim, Sung Chan

2008-12-01

The KAERI(Korea Atomic Energy of Research Institute) high-power electron beam irradiation facility, operating at the energies between 0.3 MeV and 10 MeV, has provided irradiation services to users in industries, universities, and institute in various fields. This manual is for the operation of an electron beam which is established in KAERI, and describes elementary operation procedures of electron beam between 0.3 Mev and 10 MeV. KAERI Electron Accelerator facility(Daejeon, Korea) consists of two irradiators: one is a low-energy electron beam irradiator operated by normal conducting RF accelerator, the other is medium-energy irradiator operated by superconducting RF accelerator. We explain the check points of prior to operation, operation procedure of this facility and the essential parts of electron beam accelerator

The operational procedure of an electron beam accelerator

Energy Technology Data Exchange (ETDEWEB)

Lee, Byung Cheol; Choi, Hwa Lim; Yang, Ki Ho; Han, Young Hwan; Kim, Sung Chan

2008-12-15

The KAERI(Korea Atomic Energy of Research Institute) high-power electron beam irradiation facility, operating at the energies between 0.3 MeV and 10 MeV, has provided irradiation services to users in industries, universities, and institute in various fields. This manual is for the operation of an electron beam which is established in KAERI, and describes elementary operation procedures of electron beam between 0.3 Mev and 10 MeV. KAERI Electron Accelerator facility(Daejeon, Korea) consists of two irradiators: one is a low-energy electron beam irradiator operated by normal conducting RF accelerator, the other is medium-energy irradiator operated by superconducting RF accelerator. We explain the check points of prior to operation, operation procedure of this facility and the essential parts of electron beam accelerator.

AFRICA’S DEVELOPMENT: INSTITUTIONS, ECONOMIC REFORMS AND GROWTH

Directory of Open Access Journals (Sweden)

Aloysius Ajab Amin

2013-01-01

Full Text Available The paper examines the importance of relative prices, institutional quality and other factors which are regressed on the estimated total factor productivity (TFP. With panel data of 26 African countries for the period 1980-2011, the results show that relative prices have significant effects on TFP. Also the quality of institutions is an important determinant of non-input component of output growth. The macroeconomic measures to get “prices right” in sub Saharan Africa may also be constrained by the linkages of institutions to the macroeconomic variables. Thus, policies of getting prices right with establishing strong institutions are worth continuously pursuing with vigor.

Effect of electron beam on the properties of electron-acoustic rogue waves

Science.gov (United States)

El-Shewy, E. K.; Elwakil, S. A.; El-Hanbaly, A. M.; Kassem, A. I.

2015-04-01

The properties of nonlinear electron-acoustic rogue waves have been investigated in an unmagnetized collisionless four-component plasma system consisting of a cold electron fluid, Maxwellian hot electrons, an electron beam and stationary ions. It is found that the basic set of fluid equations is reduced to a nonlinear Schrodinger equation. The dependence of rogue wave profiles and the associated electric field on the carrier wave number, normalized density of hot electron and electron beam, relative cold electron temperature and relative beam temperature are discussed. The results of the present investigation may be applicable in auroral zone plasma.

Reliability and corrosion induced degradation of electronic system

International Nuclear Information System (INIS)

Tapas, V.K.; Varde, P.V.

2014-01-01

This paper describe the corrosion induced degradation of electronic system failures due to environmental conditions such as humidity, temperature, ionic or organic contaminants, residuals; etc. which can accelerates as electrochemical reaction and causes corrosion of electronic components, Corrosive gases and water vapours from humid condition come into contact with the base metal results in buildup of various chemical reaction products. Ionic contamination responsible for electrochemical reaction, forms soluble complexes with metals, it can degrade the protective oxide film that forms on the positively biased metallization and/or lead to change in the local pH. Deterioration of metal components or electronic circuitry due to electrochemical migration needs to be controlled in order to reduce the corrosion. With explosive increase in demand and miniaturization in electronic system resulted in smaller components, closer spacing and thinner metallic path, it is expected that the corrosion and deterioration of electronic components may become cause or concern. This paper summarises the current understanding of chemistry behind possible causes of corrosion of electronic devices and its failure mechanism. (author)

TRANSIENT ELECTRONICS CATEGORIZATION

Science.gov (United States)

2017-08-24

AFRL-RY-WP-TR-2017-0169 TRANSIENT ELECTRONICS CATEGORIZATION Dr. Burhan Bayraktaroglu Devices for Sensing Branch Aerospace Components & Subsystems...SUBTITLE TRANSIENT ELECTRONICS CATEGORIZATION 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER N/A 6. AUTHOR(S) Dr. Burhan...88ABW-2017-3747, Clearance Date 31 July 2017. Paper contains color. 14. ABSTRACT Transient electronics is an emerging technology area that lacks proper

Starting electronics

CERN Document Server

Brindley, Keith

2005-01-01

Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

77 FR 51572 - Certain Wireless Consumer Electronics Devices and Components Thereof; Institution of...

Science.gov (United States)

2012-08-24

..., Taoyuan 330, Taiwan. HTC America, 13920 SE Eastgate Way, Suite 200, Bellevue, WA 98005. Huawei Technologies Co., Ltd., Huawei Industrial Base, Bantian Longgang, Shenzhen 518129, China. Huawei North America...

Institute of physics

International Nuclear Information System (INIS)

Anon.

1975-01-01

A survey is given of the personnel and activities of the Institute of Physics. Research by staff of the Nuclear Physics Group includes mainly work on heavy ion reactions and investigations of rare earth nuclei. The Elementary Particle Group has studied antineutron and antiproton annihilations, neutral current pions minus and has used the CERN ISRs. The Cosmic Physics Group has used rockets, satellite data and balloons to study the electron and proton precipitation in the upper atmosphere and magnetosphere, and aurorae. (JIW)

Electronic inventions and discoveries electronics from its earliest beginnings to the present day

CERN Document Server

Dummer, G W A

1983-01-01

Electronic Inventions and Discoveries: Electronics from Its Earliest Beginnings to the Present Day provides a summary of the development of the whole field of electronics. Organized into 13 chapters, the book covers and reviews the history of electronics as a whole and its aspects. The opening chapter covers the beginnings of electronics, while the next chapter discusses the development of components, transistors, and integrated circuits. The third chapter tackles the expansion of electronics and its effects on industry. The succeeding chapters discuss the history of the aspects of electronics

The Institute of Automotive Engineering at the Technical University of Dresden; Das Institut fuer Verbrennungsmotoren und Kraftfahrzeuge (IVK) an der TU Dresden

Energy Technology Data Exchange (ETDEWEB)

Bergmann, M.

1995-05-01

The Institute of Automotive Engineering belongs to the oldest German Institutes of this kind at all. Founded in 1918, the Institute reviews a history of over 75 years. Students training at the Institute takes aim at a future emloyment in fields of research and development and design and computing. Both car manufactures and suppliers appreciate the practice-oriented education given at the Institute. Corresponding to the internal structure the Institute provides a training at following teaching and research fields: Internal Combustion Engines, Automotive Drive Engineering and Automotive Electrics/Electronics. For that the Institute is equipped with modern test bench facilities and CAD/CAE workstations. (orig.) [Deutsch] Das IVK blickt auf eine lange Tradition zurueck und zaehlt noch heute zu den fuehrenden Ausbildungs- und Forschungsstaetten fuer Kraftfahrzeug- und Motoreningenieure. Derzeit bestehen drei Professuren: Verbrennungsmotoren, Kraftfahrzeug- und Antriebstechnik sowie Kraftfahrzeug-Elektronik/-Elektrik. (orig.)

Electromagnetic Components of Auroral Hiss and Lower Hybrid Waves in the Polar Magnetosphere

Science.gov (United States)

Wong, H. K.

1995-01-01

DE-1 has frequently observed waves in the whistler and lower hybrid frequencies range. Besides the electrostatic components, these waves also exhibit electromagnetic components. It is generally believed that these waves are excited by the electron acoustic instability and the electron-beam-driven lower hybrid instability. Because the electron acoustic and the lower hybrid waves are predominately electrostatic waves, they cannot account for the observed electromagnetic components. In this work, it is suggested that these electromagnetic components can be explained by waves that are generated near the resonance cone and that propagate away from the source. The role that these electromagnetic waves can play in particle acceleration processes at low altitude is discussed.

PREFACE: Spin Electronics

Science.gov (United States)

Dieny, B.; Sousa, R.; Prejbeanu, L.

2007-04-01

tunnel junctions were introduced as memory elements in new types of non-volatile magnetic memories (MRAM). A first 4Mbit product was launched by Freescale in July 2006. Future generations of memories are being developed by academic groups or companies. the combination of magnetic elements with CMOS components opens a whole new paradigm in hybrid electronic components which can change the common conception of the architecture of complex electronic components with a much tighter integration of logic and memory. the steady magnetic excitations stimulated by spin-transfer might be used in a variety of microwave components provided the output power can be increased. Intense research and development efforts are being aimed at increasing this power by the synchronization of oscillators. The articles compiled in this special issue of Journal of Physics: Condensed Matter, devoted to spin electronics, review these recent developments. All the contributors are greatly acknowledged.

Electronic spectra of DyF studied by four-component relativistic configuration interaction methods

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, Shigeyoshi, E-mail: syamamot@lets.chukyo-u.ac.jp [School of International Liberal Studies, Chukyo University, 101-2 Yagoto-Honmachi, Showa-ku, Nagoya 466-8666 (Japan); Tatewaki, Hiroshi [Institute of Advanced Studies in Artificial Intelligence, Chukyo University, Toyota 470-0393 (Japan); Graduate School of Natural Sciences, Nagoya City University, Aichi 467-8501 (Japan)

2015-03-07

The electronic states of the DyF molecule below 3.0 eV are studied using 4-component relativistic CI methods. Spinors generated by the average-of-configuration Hartree-Fock method with the Dirac-Coulomb Hamiltonian were used in CI calculations by the KRCI (Kramers-restricted configuration interaction) program. The CI reference space was generated by distributing 11 electrons among the 11 Kramers pairs composed mainly of Dy [4f], [6s], [6p] atomic spinors, and double excitations are allowed from this space to the virtual molecular spinors. The CI calculations indicate that the ground state has the dominant configuration (4f{sup 9})(6s{sup 2})(Ω = 7.5). Above this ground state, 4 low-lying excited states (Ω = 8.5, 7.5, 7.5, 7.5) are found with dominant configurations (4f{sup 10})(6s). These results are consistent with the experimental studies of McCarthy et al. Above these 5 states, 2 states were observed at T{sub 0} = 2.39 eV, 2.52 eV by McCarthy et al. and were named as [19.3]8.5 and [20.3]8.5. McCarthy et al. proposed that both states have dominant configurations (4f{sup 9})(6s)(6p), but these configurations are not consistent with the large R{sub e}’s (∼3.9 a.u.) estimated from the observed rotational constants. The present CI calculations provide near-degenerate states of (4f{sup 10})(6p{sub 3/2,1/2}), (4f{sup 10})(6p{sub 3/2,3/2}), and (4f{sup 9})(6s)(6p{sub 3/2,1/2}) at around 3 eV. The former two states have larger R{sub e} (3.88 a.u.) than the third, so that it is reasonable to assign (4f{sup 10})(6p{sub 3/2,1/2}) to [19.3]8.5 and (4f{sup 10})(6p{sub 3/2,3/2}) to [20.3]8.5.

ELECTRON COOLING FOR RHIC

International Nuclear Information System (INIS)

BEN-ZVI, I.; AHRENS, L.; BRENNAN, M.; HARRISON, M.; KEWISCH, J.; MACKAY, W.; PEGGS, S.; ROSER, T.; SATOGATA, T.; TRBOJEVIC, D.; YAKIMENKO, V.

2001-01-01

We introduce plans for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This project has a number of new features as electron coolers go: It will cool 100 GeV/nucleon ions with 50 MeV electrons; it will be the first attempt to cool a collider at storage-energy; and it will be the first cooler to use a bunched beam and a linear accelerator as the electron source. The linac will be superconducting with energy recovery. The electron source will be based on a photocathode gun. The project is carried out by the Collider-Accelerator Department at BNL in collaboration with the Budker Institute of Nuclear Physics

Annual report on research and development 1980 of the Institut fuer Technische Physik

International Nuclear Information System (INIS)

1981-06-01

Progress of the following working areas of the institute is reported: magnets for fusion technology (TESPE experiment, the Large Coil Task (LCT)); components and technology (development of high field superconductors (Nb 3 Sn, Nb 3 Al)), cooling techniques (HELITEX experiment); system studies on fusion reactor components; magnets for research and technology; basic research related to superconductivity; cryo-energy technology; the cryogenic engineering infrastructure of the institute. (GSCH)

Electronics engineer's reference book

CERN Document Server

Turner, L W

1976-01-01

Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

Political Institutions and Their Historical Dynamics

Science.gov (United States)

Sandberg, Mikael; Lundberg, Per

2012-01-01

Traditionally, political scientists define political institutions deductively. This approach may prevent from discovery of existing institutions beyond the definitions. Here, a principal component analysis was used for an inductive extraction of dimensions in Polity IV data on the political institutions of all nations in the world the last two centuries. Three dimensions of institutions were revealed: core institutions of democracy, oligarchy, and despotism. We show that, historically and on a world scale, the dominance of the core institutions of despotism has first been replaced by a dominance of the core institutions of oligarchy, which in turn is now being followed by an increasing dominance by the core institutions of democracy. Nations do not take steps from despotic, to oligarchic and then to democratic institutions, however. Rather, nations hosting the core democracy institutions have succeeded in historically avoiding both the core institutions of despotism and those of oligarchy. On the other hand, some nations have not been influenced by any of these dimensions, while new institutional combinations are increasingly influencing others. We show that the extracted institutional dimensions do not correspond to the Polity scores for autocracy, “anocracy” and democracy, suggesting that changes in regime types occur at one level, while institutional dynamics work on another. Political regime types in that sense seem “canalized”, i.e., underlying institutional architectures can and do vary, but to a considerable extent independently of regime types and their transitions. The inductive approach adds to the deductive regime type studies in that it produces results in line with modern studies of cultural evolution and memetic institutionalism in which institutions are the units of observation, not the nations that acts as host for them. PMID:23056219

Electronics a course book for students

CERN Document Server

Olsen, G H

2013-01-01

Electronics: A Course Book for Students, Second Edition, provides a general introduction to electronics for those who find formal or examination texts to be unsuitable for their needs. This revised text includes more analytical work on circuits. Examples and examination-type exercises are also provided. The book's early chapters focus on the basic components, such as resistors, capacitors, inductors, and transistors. Readers are then introduced to combinations of these components that form the fundamental circuits from which most electronic equipment is built. Semiconductor devices are also di

Genetics Home Reference: complement component 2 deficiency

Science.gov (United States)

... Topic: Immune System and Disorders Health Topic: Lupus Genetic and Rare Diseases Information Center (1 link) Complement component 2 deficiency Additional NIH Resources (1 link) National Institute of Allergy and Infectious Diseases: Primary Immune Deficiency Diseases Educational Resources (6 ...

X-ray spectroscopy of warm and hot electron components in the CAPRICE source plasma at EIS testbench at GSI.

Science.gov (United States)

Mascali, D; Celona, L; Maimone, F; Maeder, J; Castro, G; Romano, F P; Musumarra, A; Altana, C; Caliri, C; Torrisi, G; Neri, L; Gammino, S; Tinschert, K; Spaedtke, K P; Rossbach, J; Lang, R; Ciavola, G

2014-02-01

An experimental campaign aiming to detect X radiation emitted by the plasma of the CAPRICE source - operating at GSI, Darmstadt - has been carried out. Two different detectors (a SDD - Silicon Drift Detector and a HpGe - hyper-pure Germanium detector) have been used to characterize the warm (2-30 keV) and hot (30-500 keV) electrons in the plasma, collecting the emission intensity and the energy spectra for different pumping wave frequencies and then correlating them with the CSD of the extracted beam measured by means of a bending magnet. A plasma emissivity model has been used to extract the plasma density along the cone of sight of the SDD and HpGe detectors, which have been placed beyond specific collimators developed on purpose. Results show that the tuning of the pumping frequency considerably modifies the plasma density especially in the warm electron population domain, which is the component responsible for ionization processes: a strong variation of the plasma density near axis region has been detected. Potential correlations with the charge state distribution in the plasma are explored.

Dimensioning of a two-phase loop for the study of the cooling of power electronics components; Dimensionnement d`une boucle diphasique pour l`etude du refroidissement des composants d`electronique de puissance

Energy Technology Data Exchange (ETDEWEB)

Bricard, A [CEA Centre d` Etudes Nucleaires de Grenoble, 38 (France). STTGRETh

1997-12-31

After having chosen between different cooling solutions for a given power electronics component, the dimensioning of a two-phase forced convection loop is described. The power electronics component is a 12 x 12 mm silicon pellet which can dissipate up to 400 W/cm{sup 2} heat fluxes. In a first step, the minimum size of channels is determined according to fluid characteristics, pressure drop and critical fluxes. In a second step, the coupled dimensioning of both the evaporator and the condenser is determined for different values of pipes diameter and mass flow rates. (J.S.) 8 refs.

Dimensioning of a two-phase loop for the study of the cooling of power electronics components; Dimensionnement d`une boucle diphasique pour l`etude du refroidissement des composants d`electronique de puissance

Energy Technology Data Exchange (ETDEWEB)

Bricard, A. [CEA Centre d`Etudes Nucleaires de Grenoble, 38 (France). STTGRETh

1996-12-31

After having chosen between different cooling solutions for a given power electronics component, the dimensioning of a two-phase forced convection loop is described. The power electronics component is a 12 x 12 mm silicon pellet which can dissipate up to 400 W/cm{sup 2} heat fluxes. In a first step, the minimum size of channels is determined according to fluid characteristics, pressure drop and critical fluxes. In a second step, the coupled dimensioning of both the evaporator and the condenser is determined for different values of pipes diameter and mass flow rates. (J.S.) 8 refs.

INTERNAL CONTROL IN PUBLIC HEALTH SERVICES INSTITUTIONS

Directory of Open Access Journals (Sweden)

Ludmila FRUMUSACHI

2017-06-01

Full Text Available Internal control has a special role in the efficient organization of the entity’s management. The components of this control in the institutions of public health service are determined by the specific character of these institutions and National Standards of Internal Control in the Public Sector. The system of internal control in the institutions of public health service has the capacity to canalize the effort of the whole institution for the achievement of proposed objectives, to signalize permanently the dysfunctionalities about the quality of medical services and the deviations and to operate timely corrective measures for eliminating the noticed problems. In this regard the managers are obliged to analyse and to resize the system of internal control when in the organizational structure appear substantial changes.

About the information depth of backscattered electron imaging

Czech Academy of Sciences Publication Activity Database

Piňos, Jakub; Mikmeková, Šárka; Frank, Luděk

2017-01-01

Roč. 266, č. 3 (2017), s. 335-342 ISSN 0022-2720 Institutional support: RVO:68081731 Keywords : backscattered electrons * information depth * penetration of electrons Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering OBOR OECD: Materials engineering Impact factor: 1.692, year: 2016

Simulations and measurements in scanning electron microscopes at low electron energy

Czech Academy of Sciences Publication Activity Database

Walker, C.; Frank, Luděk; Müllerová, Ilona

2016-01-01

Roč. 38, č. 6 (2016), s. 802-818 ISSN 0161-0457 R&D Projects: GA TA ČR(CZ) TE01020118; GA MŠk(CZ) LO1212; GA MŠk ED0017/01/01 EU Projects: European Commission(XE) 606988 - SIMDALEE2 Institutional support: RVO:68081731 Keywords : Monte Carlo modeling * scanned probe * computer simulation * electron-solid interactions * surface analysis Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.345, year: 2016

Electronics

Science.gov (United States)

2001-01-01

International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

Foreign Students’ Professional Training in Kazakhstan Higher Educational Institutions: Ethno-cultural Aspect

Directory of Open Access Journals (Sweden)

Nurmambek Ramashov

2013-01-01

Full Text Available The authors analyze the problem of ethno-cultural education, regulatory documents of Kazakhstan Republic in the sphere of education and define the ethno-cultural aspect of foreign students’ professional training in Kazakhstan higher educational institutions. The analysis of foreign students’ training in Kazakhstan higher educational institutions trends allowed to determine the following requirements: expansion of educational institutions chain and the types, inclusion of ethno-cultural component of youth ideological training in their programs and curricula; review and expansion of curricula and programs, providing the basis for a basic plan, state standards, enhancement and increase of humanitarian and cultural components in accordance with the training profile; introduction of ethnos history and its culture as the regional educational component and addition to the core subjects and courses. The idea of ethnic and cultural enrichment of the entire system of professional education in the country will make it humanized.

78 FR 38072 - Certain Consumer Electronics With Display and Processing Capabilities; Institution of...

Science.gov (United States)

2013-06-25

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-884] Certain Consumer Electronics With Display and... electronics with display and processing capabilities by reason of infringement of U.S. Patent No. 6,650,327... after importation of certain consumer electronics with display and processing capabilities by reason of...

Two-component scattering model and the electron density spectrum

Science.gov (United States)

Zhou, A. Z.; Tan, J. Y.; Esamdin, A.; Wu, X. J.

2010-02-01

In this paper, we discuss a rigorous treatment of the refractive scintillation caused by a two-component interstellar scattering medium and a Kolmogorov form of density spectrum. It is assumed that the interstellar scattering medium is composed of a thin-screen interstellar medium (ISM) and an extended interstellar medium. We consider the case that the scattering of the thin screen concentrates in a thin layer represented by a δ function distribution and that the scattering density of the extended irregular medium satisfies the Gaussian distribution. We investigate and develop equations for the flux density structure function corresponding to this two-component ISM geometry in the scattering density distribution and compare our result with the observations. We conclude that the refractive scintillation caused by this two-component ISM scattering gives a more satisfactory explanation for the observed flux density variation than does the single extended medium model. The level of refractive scintillation is strongly sensitive to the distribution of scattering material along the line of sight (LOS). The theoretical modulation indices are comparatively less sensitive to the scattering strength of the thin-screen medium, but they critically depend on the distance from the observer to the thin screen. The logarithmic slope of the structure function is sensitive to the scattering strength of the thin-screen medium, but is relatively insensitive to the thin-screen location. Therefore, the proposed model can be applied to interpret the structure functions of flux density observed in pulsar PSR B2111 + 46 and PSR B0136 + 57. The result suggests that the medium consists of a discontinuous distribution of plasma turbulence embedded in the interstellar medium. Thus our work provides some insight into the distribution of the scattering along the LOS to the pulsar PSR B2111 + 46 and PSR B0136 + 57.

High-brightness electron injectors

International Nuclear Information System (INIS)

Sheffield, R.L.

1987-01-01

Free-electron laser (FEL) oscillators and synchrotron light sources require pulse trains of high peak brightness and, in some applications, high-average power. Recent developments in the technology of photoemissive and thermionic electron sources in rf cavities for electron-linac injector applications offer promising advances over conventional electron injectors. Reduced emittance growth in high peak-current electron injectors may be achieved by using high field strengths and by linearizing the radial component of the cavity electric field at the expense of lower shunt impedance

Behavior Protocols for Software Components

Czech Academy of Sciences Publication Activity Database

Plášil, František; Višňovský, Stanislav

2002-01-01

Roč. 28, č. 11 (2002), s. 1056-1076 ISSN 0098-5589 R&D Projects: GA AV ČR IAA2030902; GA ČR GA201/99/0244 Grant - others:Eureka(XE) Pepita project no.2033 Institutional research plan: AV0Z1030915 Keywords : behavior protocols * component-based programming * software architecture Subject RIV: JC - Computer Hardware ; Software Impact factor: 1.170, year: 2002

Electronic case report forms and electronic data capture within clinical trials and pharmacoepidemiology.

Science.gov (United States)

Rorie, David A; Flynn, Robert W V; Grieve, Kerr; Doney, Alexander; Mackenzie, Isla; MacDonald, Thomas M; Rogers, Amy

2017-09-01

Researchers in clinical and pharmacoepidemiology fields have adopted information technology (IT) and electronic data capture, but these remain underused despite the benefits. This review discusses electronic case report forms and electronic data capture, specifically within pharmacoepidemiology and clinical research. The review used PubMed and the Institute of Electrical and Electronic Engineers library. Search terms used were agreed by the authors and documented. PubMed is medical and health based, whereas Institute of Electrical and Electronic Engineers is technology based. The review focuses on electronic case report forms and electronic data capture, but briefly considers other relevant topics; consent, ethics and security. There were 1126 papers found using the search terms. Manual filtering and reviewing of abstracts further condensed this number to 136 relevant manuscripts. The papers were further categorized: 17 contained study data; 40 observational data; 27 anecdotal data; 47 covering methodology or design of systems; one case study; one literature review; two feasibility studies; and one cost analysis. Electronic case report forms, electronic data capture and IT in general are viewed with enthusiasm and are seen as a cost-effective means of improving research efficiency, educating participants and improving trial recruitment, provided concerns about how data will be protected from misuse can be addressed. Clear operational guidelines and best practises are key for healthcare providers, and researchers adopting IT, and further work is needed on improving integration of new technologies with current systems. A robust method of evaluation for technical innovation is required. © 2017 The Authors. British Journal of Clinical Pharmacology published by John Wiley & Sons Ltd on behalf of British Pharmacological Society.

Analysis and Implementation of an Electronic Laboratory Notebook in a Biomedical Research Institute.

Science.gov (United States)

Guerrero, Santiago; Dujardin, Gwendal; Cabrera-Andrade, Alejandro; Paz-Y-Miño, César; Indacochea, Alberto; Inglés-Ferrándiz, Marta; Nadimpalli, Hima Priyanka; Collu, Nicola; Dublanche, Yann; De Mingo, Ismael; Camargo, David

2016-01-01

Electronic laboratory notebooks (ELNs) will probably replace paper laboratory notebooks (PLNs) in academic research due to their advantages in data recording, sharing and security. Despite several reports describing technical characteristics of ELNs and their advantages over PLNs, no study has directly tested ELN performance among researchers. In addition, the usage of tablet-based devices or wearable technology as ELN complements has never been explored in the field. To implement an ELN in our biomedical research institute, here we first present a technical comparison of six ELNs using 42 parameters. Based on this, we chose two ELNs, which were tested by 28 scientists for a 3-month period and by 80 students via hands-on practical exercises. Second, we provide two survey-based studies aimed to compare these two ELNs (PerkinElmer Elements and Microsoft OneNote) and to analyze the use of tablet-based devices. We finally explore the advantages of using wearable technology as ELNs tools. Among the ELNs tested, we found that OneNote presents almost all parameters evaluated (39/42) and both surveyed groups preferred OneNote as an ELN solution. In addition, 80% of the surveyed scientists reported that tablet-based devices improved the use of ELNs in different respects. We also describe the advantages of using OneNote application for Apple Watch as an ELN wearable complement. This work defines essential features of ELNs that could be used to improve ELN implementation and software development.

Analysis and Implementation of an Electronic Laboratory Notebook in a Biomedical Research Institute.

Directory of Open Access Journals (Sweden)

Santiago Guerrero

Full Text Available Electronic laboratory notebooks (ELNs will probably replace paper laboratory notebooks (PLNs in academic research due to their advantages in data recording, sharing and security. Despite several reports describing technical characteristics of ELNs and their advantages over PLNs, no study has directly tested ELN performance among researchers. In addition, the usage of tablet-based devices or wearable technology as ELN complements has never been explored in the field. To implement an ELN in our biomedical research institute, here we first present a technical comparison of six ELNs using 42 parameters. Based on this, we chose two ELNs, which were tested by 28 scientists for a 3-month period and by 80 students via hands-on practical exercises. Second, we provide two survey-based studies aimed to compare these two ELNs (PerkinElmer Elements and Microsoft OneNote and to analyze the use of tablet-based devices. We finally explore the advantages of using wearable technology as ELNs tools. Among the ELNs tested, we found that OneNote presents almost all parameters evaluated (39/42 and both surveyed groups preferred OneNote as an ELN solution. In addition, 80% of the surveyed scientists reported that tablet-based devices improved the use of ELNs in different respects. We also describe the advantages of using OneNote application for Apple Watch as an ELN wearable complement. This work defines essential features of ELNs that could be used to improve ELN implementation and software development.

Analysing Institutions Interdisciplinarity by Extensive Use of Rao-Stirling Diversity Index.

Science.gov (United States)

Cassi, Lorenzo; Champeimont, Raphaël; Mescheba, Wilfriedo; de Turckheim, Élisabeth

2017-01-01

This paper shows how the Rao-Stirling diversity index may be extensively used for positioning and comparing institutions interdisciplinary practices. Two decompositions of this index make it possible to explore different components of the diversity of the cited references in a corpus of publications. The paper aims at demonstrating how these bibliometric tools can be used for comparing institutions in a research field by highlighting collaboration orientations and institutions strategies. To make the method available and easy to use for indicator users, this paper first recalls a previous result on the decomposition of the Rao-Stirling index into multidisciplinarity and interdisciplinarity components, then proposes a new decomposition to further explore the profile of research collaborations and finally presents an application to Neuroscience research in French universities.

Electron beam micromachining of plastics

Czech Academy of Sciences Publication Activity Database

Dupák, Libor

2014-01-01

Roč. 49, 5-6 (2014), s. 310-314 ISSN 0861-4717 R&D Projects: GA MŠk(CZ) LO1212; GA MŠk ED0017/01/01; GA MŠk EE.2.3.20.0103 Institutional support: RVO:68081731 Keywords : micromachining of plastics * Electron beam Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering

Information Technology in project-organized electronic and computer technology engineering education

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

1999-01-01

This paper describes the integration of IT in the education of electronic and computer technology engineers at Institute of Electronic Systems, Aalborg Uni-versity, Denmark. At the Institute Information Technology is an important tool in the aspects of the education as well as for communication...

Design, construction and tuning of S-band coupler for electron linear accelerator of institute for research in fundamental sciences (IPM E-linac)

International Nuclear Information System (INIS)

Ghasemi, F.; Abbasi Davani, F.; Lamehi Rachti, M.; Shaker, H.; Ahmadiannamin, S.

2015-01-01

Design and construction of an electron linear accelerator by Institute for Research in Fundamental Science (IPM) is considered as Iran’s first attempt to construct such an accelerator. In order to design a linear accelerating tube, after defining the accelerating tube and buncher geometries, RF input and output couplers must be designed. In this article, firstly, a brief report on the specifications of an S-band electron linear accelerator which is in progress in the school of particles and accelerators is presented and then, the design process and construction reports of the couplers required for this accelerator are described. Through performing necessary calculations and tuning the coupling factor and resonant frequency, couplers with desired specification have been fabricated by shrinking method. The final obtained coupling factor and resonant frequency have been respectively 1.05 and 2997 MHz for the first coupler, and 0.98 and 2996.9 MHz for the second one that are close to calculation results

Cooling of electronic equipment

DEFF Research Database (Denmark)

A. Kristensen, Anders Schmidt

2003-01-01

Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

Verification of Software Components: Addressing Unbounded Paralelism

Czech Academy of Sciences Publication Activity Database

Adámek, Jiří

2007-01-01

Roč. 8, č. 2 (2007), s. 300-309 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : software components * formal verification * unbounded parallelism Subject RIV: JC - Computer Hardware ; Software

national jalma institute for leprosy & other mycobacterial diseases

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. NATIONAL JALMA INSTITUTE FOR LEPROSY & OTHER MYCOBACTERIAL DISEASES : MAJOR THRUST AREAS. LEPROSY : Understanding the disease better using electrophysiological, immunological, molecular and electron-microscopic tools. Developing better ...

DARMSTADT: Superconducting electron accelerator in operation

International Nuclear Information System (INIS)

Anon.

1991-01-01

In December, the S-DALINAC superconducting radiofrequency electron accelerator at the Nuclear Physics Institute of Darmstadt's Technische Hochschule was completed. This pioneer continuous-wave (c.w.) machine passed a major milestone several years ago when it accelerated its first low energy electron beam

76 FR 54252 - In the Matter of Certain Wireless Devices With 3G Capabilities and Components Thereof; Notice of...

Science.gov (United States)

2011-08-31

... With 3G Capabilities and Components Thereof; Notice of Institution of Investigation Institution of... States after importation of certain wireless devices with 3G capabilities and components thereof by... after [[Page 54253

The art of electronics

CERN Document Server

Horowitz, Paul

2015-01-01

At long last, here is the thoroughly revised and updated third edition of the hugely successful Art of Electronics. It is widely accepted as the best single authoritative book on electronic circuit design. In addition to new or enhanced coverage of many topics, the Third Edition includes: 90 oscilloscope screenshots illustrating the behavior of working circuits; dozens of graphs giving highly useful measured data of the sort that's often buried or omitted in datasheets but which you need when designing circuits; 80 tables (listing some 1650 active components), enabling intelligent choice of circuit components by listing essential characteristics (both specified and measured) of available parts. The new Art of Electronics ​​retains the feeling of informality and easy access that helped make the earlier editions so successful and popular. It is an indispensable reference and the gold standard​​ for anyone, student or researcher, professional or amateur, who works with electronic circuits.

Managerial Methodology in Public Institutions

Directory of Open Access Journals (Sweden)

Ion VERBONCU

2010-10-01

Full Text Available One of the most important ways of making public institutions more efficient is by applying managerial methodology, embodied in the promotion of management tools, modern and sophisticated methodologies, as well as operation of designing/redesigning and maintenance of the management process and its components. Their implementation abides the imprint of constructive and functional particularities of public institutions, decentralized and devolved, and, of course, the managers’ expertise of these organizations. Managerial methodology is addressed through three important instruments diagnosis, management by objectives and scoreboard. Its presence in the performance management process should be mandatory, given the favorable influence on the management and economic performance and the degree of scholastic approach of the managers’ performance.

Electron shuttles in biotechnology.

Science.gov (United States)

Watanabe, Kazuya; Manefield, Mike; Lee, Matthew; Kouzuma, Atsushi

2009-12-01

Electron-shuttling compounds (electron shuttles [ESs], or redox mediators) are essential components in intracellular electron transfer, while microbes also utilize self-produced and naturally present ESs for extracellular electron transfer. These compounds assist in microbial energy metabolism by facilitating electron transfer between microbes, from electron-donating substances to microbes, and/or from microbes to electron-accepting substances. Artificially supplemented ESs can create new routes of electron flow in the microbial energy metabolism, thereby opening up new possibilities for the application of microbes to biotechnology processes. Typical examples of such processes include halogenated-organics bioremediation, azo-dye decolorization, and microbial fuel cells. Herein we suggest that ESs can be applied widely to create new microbial biotechnology processes.

Novel simulation method of space charge effects in electron optical systems including emission of electrons

Czech Academy of Sciences Publication Activity Database

Zelinka, Jiří; Oral, Martin; Radlička, Tomáš

2018-01-01

Roč. 184, JAN (2018), s. 66-76 ISSN 0304-3991 R&D Projects: GA MŠk(CZ) LO1212; GA MŠk ED0017/01/01 Institutional support: RVO:68081731 Keywords : space charge * self-consistent simulation * aberration polynomial * electron emission Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 2.843, year: 2016

Tunneling of electrons through semiconductor superlattices

Indian Academy of Sciences (India)

Unknown

Tunneling of electrons through semiconductor superlattices. C L ROY. Department of Physics and Meteorology, Indian Institute of Technology, Kharagpur 721 302, India. Abstract. The purpose of the present paper is to report a study of tunneling of electrons through semicon- ductor superlattices (SSL); specially, we have ...

Power electronics

Indian Academy of Sciences (India)

Kishore Chatterjee

This special issue of Sadhana is a compilation of papers selected from those presented at the 7th National Power. Electronics Conference (NPEC), held at the Indian Institute of Technology, Bombay, on 21–23 December 2015. From among the papers presented in NPEC-2017, selected papers were peer-reviewed for ...

Component and system tests of the SLD Cerenkov Ring Imaging Detector

International Nuclear Information System (INIS)

Antilogus, P.; Bird, F.; Aston, D.; Dasu, S.; Dunwoodie, W.; Hallewell, G.; Kawahara, H.; Kwon, Y.; Leith, D.; Nagamine, T.; Pavel, T.; Muller, D.; Williams, S.; Bienz, T.; Dolinsky, S.; Solodov, E.; Coyle, P.; Cavalli-Sforza, M.; Coyne, D.; Gagnon, P.; Liu, X.; Williams, D.A.

1990-01-01

The components of the SLD barrel Cerenkov Ring Imaging Detector (CRID) are now built and are being installed. This paper reports on tests of these components, including tests of the fiber optic calibration system, detailed studies of electron drift paths on production drift boxes and detectors, tests of the dynamic gating system and its effect on drift path distortions due to space-charge, and a measurement of the electron lifetime in a production drift box. In addition, the authors report on the UV transmission of recirculated liquid freon and on the effects of CRID construction materials on electron lifetime

Component and system tests of the SLD Cerenkov Ring Imaging Detector

International Nuclear Information System (INIS)

Antilogus, P.; Aston, D.; Bienz, T.; Bird, F.; Dasu, S.; Dolinsky, S.; Dunwoodie, W.; Hallewell, G.; Kawahara, H.; Kwon, Y.; Leith, D.; Muller, D.; Nagamine, T.; Pavel, T.; Ratcliff, B.; Rensing, P.; Schultz, D.; Shapiro, S.; Simopoulos, C.; Solodov, E.; Toge, N.; Va'vra, J.; Williams, S.; Cavalli-Sforza, M.; Coyle, P.; Coyne, D.; Gagnon, P.; Liu, X.; Williams, D.A.; Whitaker, J.S.; Wilson, R.J.; Bean, A.; Caldwell, D.; Duboscq, J.; Huber, J.; Lu, A.; Mathys, L.; McHugh, S.; Witherell, M.; Yellin, S.; d'Oliveira, A.; Johnson, R.A.; Martinez, J.; Meadows, B.; Nussbaum, M.; Santha, A.K.S.; Shoup, A.; Stockdale, I.; Jacques, P.; Kalelkar, M.; Plano, R.; Stamer, P.; Abe, K.; Hasegawa, K.; Suekane, F.; Yuta, H.

1990-10-01

The components of the SLD barrel Cerenkov Ring Imaging Detector (CRID) are now built and are being installed. We report on tests of these components, including tests of the fiber optic calibration system, detailed studies of electron drift paths on production drift boxes and detectors, tests of the dynamic gating systems and its effect on drift path distortions due to space-charge, and a measurement of the electron lifetime in a production drift box. In addition, we report on the UV transmission of recirculated liquid freon and on the effects of CRID construction materials on electron lifetime. 16 refs., 12 figs

Analysis of patient setup accuracy using electronic portal imaging device

International Nuclear Information System (INIS)

Onogi, Yuzo; Aoki, Yukimasa; Nakagawa, Keiichi

1996-01-01

Radiation therapy is performed in many fractions, and accurate patient setup is very important. This is more significant nowadays because treatment planning and radiation therapy are more precisely performed. Electronic portal imaging devices and automatic image comparison algorithms let us analyze setup deviations quantitatively. With such in mind we developed a simple image comparison algorithm. Using 2459 electronic verification images (335 ports, 123 treatment sites) generated during the past three years at our institute, we evaluated the results of the algorithm, and analyzed setup deviations according to the area irradiated, use of a fixing device (shell), and arm position. Calculated setup deviation was verified visually and their fitness was classified into good, fair, bad, and incomplete. The result was 40%, 14%, 22%, 24% respectively. Using calculated deviations classified as good (994 images), we analyzed setup deviations. Overall setup deviations described in 1 SD along axes x, y, z, was 1.9 mm, 2.5 mm, 1.7 mm respectively. We classified these deviations into systematic and random components, and found that random error was predominant in our institute. The setup deviations along axis y (cranio-caudal direction) showed larger distribution when treatment was performed with the shell. Deviations along y (cranio-caudal) and z (anterior-posterior) had larger distribution when treatment occurred with the patient's arm elevated. There was a significant time-trend error, whose deviations become greater with time. Within all evaluated ports, 30% showed a time-trend error. Using an electronic portal imaging device and automatic image comparison algorithm, we are able to analyze setup deviations more precisely and improve setup method based on objective criteria. (author)

The Role of Religious Institutions, Electronic Games, Books, and Educational Stories in the Development of the Child's Culture from the Perspective of Jordanian Mothers According to Some Variables

Science.gov (United States)

Al Harbat, Rima; Al Saqarat, Khalaf

2017-01-01

The purpose of this study is to investigate the role of religious institutions, electronic games, books and educational stories in the development of the child's culture from the perspective of some of Jordanian mothers in Al Karak Governorate, and to achieve the objective of the study a questionnaire was build, it consisted of (33) items divided…

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Energy Technology Data Exchange (ETDEWEB)

Liu, X.; Lian, Y.; Xu, Z.; Chen, J.; Chen, L.; Wang, Q.; Duan, X., E-mail: xliu@swip.ac.cn [Southwestern Institute of Physics, Chengu (China); Luo, G. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Yan, Q. [University of Science and Technology Beijing, Beijing (China)

2012-09-15

Full text: High heat flux components for first wall and divertor are the key subassembly of the present fusion experiment apparatus and fusion reactors in the future. It is requested the metallurgical bonding among the plasma facing materials (PFMs), heat sink and support materials. As to PFMs, ITER grade vacuum hot pressed beryllium CN-G01 was developed in China and has been accepted as the reference material of ITER first wall. Additionally pure tungsten and tungsten alloys, as well as chemical vapor deposition (CVD) W coating are being developed for the aims of ITER divertor application and the demand of domestic fusion devices, and significant progress has been achieved. For plasma facing components (PFCs), high heat flux components used for divertor chamber are being studied according to the development program of the fusion experiment reactor of China. Two reference joining techniques of W/Cu mockups for ITER divertor chamber are being developed, one is mono-block structure by pure copper casting of tungsten surface following by hot iso-static press (HIP), and another is flat structure by brazing. The critical acceptance criteria of high heat flux components are their high heat load performance. A 60 kW Electron-beam Material testing Scenario (EMS-60) has been constructed at Southwestern Institute of Physics (SWIP),which adopts an electron beam welding gun with maximum energy of 150 keV and 150 x 150 mm{sup 2} scanning area by maximum frame rate of 30 kHz. Furthermore, an Engineering Mockup testing Scenario (EMS-400) facility with 400 kW electron-beam melting gun is under construction and will be available by the end of this year. After that, China will have the comprehensive capability of high heat load evaluation from PFMs and small-scale mockups to engineering full scale PFCs. A brazed W/CuCrZr mockup with 25 x 25 x 40 mm{sup 3} in dimension was tested at EMS-60. The heating and cooling time are 10 seconds and 15 seconds, respectively. The experiment

Assembling surface mounted components on ink-jet printed double sided paper circuit board

International Nuclear Information System (INIS)

Andersson, Henrik A; Manuilskiy, Anatoliy; Haller, Stefan; Sidén, Johan; Nilsson, Hans-Erik; Hummelgård, Magnus; Olin, Håkan; Hummelgård, Christine

2014-01-01

Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed. (paper)

Assembling surface mounted components on ink-jet printed double sided paper circuit board.

Science.gov (United States)

Andersson, Henrik A; Manuilskiy, Anatoliy; Haller, Stefan; Hummelgård, Magnus; Sidén, Johan; Hummelgård, Christine; Olin, Håkan; Nilsson, Hans-Erik

2014-03-07

Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed.

Assembling surface mounted components on ink-jet printed double sided paper circuit board

Energy Technology Data Exchange (ETDEWEB)

Andersson, Henrik A; Manuilskiy, Anatoliy; Haller, Stefan; Sidén, Johan; Nilsson, Hans-Erik [Department of Electronics Design, Mid Sweden University, SE-851 70 Sundsvall (Sweden); Hummelgård, Magnus; Olin, Håkan [Department of Natural Science, Mid Sweden University, SE-851 70 Sundsvall (Sweden); Hummelgård, Christine [Acreo Swedish ICT AB, Håstaholmen 4, SE-824 42 Hudiksvall (Sweden)

2014-03-07

Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed. (paper)

77 FR 65713 - Certain Optoelectronic Devices for Fiber Optic Communications, Components Thereof, and Products...

Science.gov (United States)

2012-10-30

... Fiber Optic Communications, Components Thereof, and Products Containing the Same; Notice of Institution... certain optoelectronic devices for fiber optic communications, components thereof, and products containing... optoelectronic devices for fiber optic communications, components thereof, and products containing the same that...

76 FR 69284 - Certain Integrated Solar Power Systems and Components Thereof: Notice of Institution of...

Science.gov (United States)

2011-11-08

... the United States after importation of certain integrated solar power systems and components thereof... certain integrated solar power systems and components thereof that infringe one or more of claims 6 and 10... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-811] Certain Integrated Solar Power...

Nonlinear ion-mixing-mode particle transport in the dissipative trapped electron regime

International Nuclear Information System (INIS)

Ware, A.S.; Terry, P.W.

1993-09-01

The nonlinear particle transport arising from the convection of nonadiabatic electron density by ion temperature gradient driven turbulence is examined for trapped electron collisionality regimes. The renormalized dissipative nonadiabatic trapped electron phase space density response is derived and used to calculate the nonlinear particle flux along with an ansatz for the turbulently broadened frequency spectrum. In the lower temperature end of this regime, trapped electrons are collisional and all components of the quasilinear particle flux are outward (i.e., in the direction of the gradients). Nonlinear effects can alter the phase between the nonadiabatic trapped electron phase space density and the electrostatic potential, producing inward components in the particle flux. Specifically, both turbulent shifting of the peak of the frequency spectrum and nonlinear source terms in the trapped electron response can give rise to inward components. However, in the dissipative regime these terms are small and the trapped electron response remains dominantly laminar. When the trapped electrons are collisionless, there is a temperature threshold above which the electron temperature gradient driven component of the quasilinear particle flux changes sign and becomes inward. For finite amplitude turbulence, however, turbulent broadening of both the electron collisional resonance and the frequency spectrum removes tills threshold., and the temperature gradient driven component remains outward

X-ray spectroscopy of warm and hot electron components in the CAPRICE source plasma at EIS testbench at GSI

Energy Technology Data Exchange (ETDEWEB)

Mascali, D., E-mail: davidmascali@lns.infn.it; Celona, L.; Castro, G.; Torrisi, G.; Neri, L.; Gammino, S.; Ciavola, G. [Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud, – Via S. Sofia 62, 95123 Catania (Italy); Maimone, F.; Maeder, J.; Tinschert, K.; Spaedtke, K. P.; Rossbach, J.; Lang, R. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Planckstrasse 1, 64291 Darmstadt (Germany); Romano, F. P. [Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud, – Via S. Sofia 62, 95123 Catania (Italy); IBAM, CNR, Via Biblioteca 4, 95124 Catania (Italy); Musumarra, A.; Altana, C.; Caliri, C. [Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali del Sud, – Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Fisica e Astronomia, Università degli Studi di Catania, via S. Sofia 64, 95123 Catania (Italy)

2014-02-15

An experimental campaign aiming to detect X radiation emitted by the plasma of the CAPRICE source – operating at GSI, Darmstadt – has been carried out. Two different detectors (a SDD – Silicon Drift Detector and a HpGe – hyper-pure Germanium detector) have been used to characterize the warm (2–30 keV) and hot (30–500 keV) electrons in the plasma, collecting the emission intensity and the energy spectra for different pumping wave frequencies and then correlating them with the CSD of the extracted beam measured by means of a bending magnet. A plasma emissivity model has been used to extract the plasma density along the cone of sight of the SDD and HpGe detectors, which have been placed beyond specific collimators developed on purpose. Results show that the tuning of the pumping frequency considerably modifies the plasma density especially in the warm electron population domain, which is the component responsible for ionization processes: a strong variation of the plasma density near axis region has been detected. Potential correlations with the charge state distribution in the plasma are explored.

Novel approach to utilizing electronic health records for dermatologic research: developing a multi-institutional federated data network for clinical and translational research in psoriasis and psoriatic arthritis.

Science.gov (United States)

Armstrong, April W; Reddy, Shalini B; Garg, Amit

2012-05-15

The implementation of Electronic Health Records (EHR) in the United States has created new opportunities for research using automated data extraction methods. A large amount of information from the EHR can be utilized for clinical and translational research. To date, a number of institutions have the capability of extracting clinical data from EHR to create local repositories of de-identified data amenable to research queries through the Informatics for Integrated Biology and the Bedside (i2b2) platform. Collaborations among institutions sharing a common i2b2 platform hold exciting opportunities for research in psoriasis and psoriatic arthritis. With the automated extraction of patient-level data from multiple institutions, this novel informatics network has the ability to address high-priority research questions. With commitment to high-quality data through applied algorithms for cohort identification and validation of outcomes, the creation of Psoriasis and Psoriatic Arthritis Integrated Research Data Network (PIONEER) will make a significant contribution to psoriasis and psoriatic arthritis research.

Components in the interstellar medium

International Nuclear Information System (INIS)

Martin, E.R.

1981-01-01

An analysis is made of the lines of sight toward 32 stars with a procedure that gives velocity components for various interstellar ions. The column densities found for species expected to be relatively undepleted are used to estimate the column density of neutral hydrogen in each component. Whenever possible, the molecular hydrogen excitation temperature, abundances (relative to S II), electron density, and hydrogen volume density are calculated for each component. The results for each star are combined to give total HI column density as a function of (LSR) velocity. The derived velocities correspond well with those found in optical studies. The mean electron density is found to be approximately constant with velocity, but the mean hydrogen volume density is found to vary. The data presented here are consistent with the assumption that some of the velocity components are due to circumstellar material. The total HI column density toward a given star is generally in agreement with Lyman alpha measurements, but ionization and abundance effects are important toward some stars. The total HI column density is found to vary exponentially with velocity (for N(HI)> 10 17 cm -2 ), with an indication that the velocity dispersion at low column densities (N(HI) 17 cm -2 ) is approximately constant. An estimate is made of the kinetic energy density due to cloud motion which depends only on the total HI column density as a function of velocity. The value of 9 x 10 42 erg/pc 3 is in good agreement with a theoretical prediction

Escherichia coli pyruvate dehydrogenase complex: particle masses of the complex and component enzymes measured by scanning transmission electron microscopy

International Nuclear Information System (INIS)

CaJacob, C.A.; Frey, P.A.; Hainfeld, J.F.; Wall, J.S.; Yang, H.

1985-01-01

Particle masses of the Escherichia coli pyruvate dehydrogenase (PDH) complex and its component enzymes have been measured by scanning transmission electron microscopy (STEM). The particle mass of PDH complex measured by STEM is 5.28 X 10(6) with a standard deviation of 0.40 X 10(6). The masses of the component enzymes are 2.06 X 10(5) for the dimeric pyruvate dehydrogenase (E1), 1.15 X 10(5) for dimeric dihydrolipoyl dehydrogenase (E3), and 2.20 X 10(6) for dihydrolipoyl transacetylase (E2), the 24-subunit core enzyme. STEM measurements on PDH complex incubated with excess E3 or E1 failed to detect any additional binding of E3 but showed that the complex would bind additional E1 under forcing conditions. The additional E1 subunits were bound too weakly to represent binding sites in an isolated or isolable complex. The mass measurements by STEM are consistent with the subunit composition 24:24:12 when interpreted in the light of the flavin content of the complex and assuming 24 subunits in the core enzyme (E2)

Electronic Publishing: Introduction to This Issue.

Science.gov (United States)

Siegel, Martin A.

1994-01-01

Provides an overview of this special issue that addresses the possibilities and implications of electronic publishing and information dissemination as key components of effective education. Highlights include the theory and framework of electronic publishing; differences between electronic text and print; development of new educational materials;…

Native human serum amyloid P component is a single pentamer

DEFF Research Database (Denmark)

Sørensen, Inge Juul; Andersen, Ove; Nielsen, EH

1995-01-01

Serum amyloid P component (SAP) and C-reactive protein (CRP) are members of the pentraxin protein family. SAP is the precursor protein to amyloid P component present in all forms of amyloidosis. The prevailing notion is that SAP in circulation has the form of a double pentameric molecule (decamer...... by rocket immunoelectrophoresis and electron microscopy. Thus, electron micrographs of purified SAP showed a predominance of decamers. However, the decamer form of SAP reversed to single pentamers when purified SAP was incorporated into SAP-depleted serum....

Present status and future plans at INS 1.3 GeV electron synchrotron

International Nuclear Information System (INIS)

Yoshida, K.

1984-01-01

The 1.3 GeV electron synchrotron at the Institute for Nuclear Study, University of Tokyo, was completed in 1961, and it was the first accelerator in Japan that was able to be used for the study on particle physics. The brief chronicle is shown. One of the purposes to construct the electron synchrotron was to train accelerator physicists for the next big project of building a high energy proton synchrotron. This project led to the foundation of the National Laboratory for High Energy Physics, and the Photon Factory was completed in 1982 there. The electron synchrotron has been continuously operated for 22 years. Meanwhile, the major components such as the injector linac, the vacuum system and the of acceleration system were renewed. By these improvement, the beam intensity and stability of the synchrotron were much improved. The circulating current is now 160 mA, and the number of accelerated electrons is 2.5 x 10 12 /sec. These are the highest values in the world. The parameters of the present synchrotron and the operational status are shown. There are five beam channels, that is, bremsstrahlung channel, tagged photon beam, fast extracted electron beam, synchrotron light channel and detector test channel. The recent activities with the INS electron synchrotron and the future plans are summarized. (Kako, I.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 1999

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2000-02-01

The work of the institute is directed to the assessment and enhancement of the safety of large technical plants and to the increase of the effectiveness and environmental sustainability of those facilities. Subjects of investigations are equally nuclear plants and installations of process industries. To achieve the above mentioned goals, the institute is engaged in two scientific fields, i.e. thermo-fluiddynamics including magneto-hydrodynamics (MHD) and materials/components safety. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2004

International Nuclear Information System (INIS)

Weiss, F.P.; Rindelhardt, U.

2005-01-01

The Institute of Safety Research (ISR) is one of the six Research Institutes of Forschungszentrum Rossendorf e.V. (FZR e.V.) which is a member institution of the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz (Leibniz Association). Together with the Institute of Radiochemistry, ISR constitutes the research programme ''Safety and Environment'' which is one from three scientific programmes of FZR. In the framework of this research programme, the institute is responsible for the two subprogrammes ''Plant and Reactor Safety'' and ''Thermal Fluid Dynamics'', respectively. We also provide minor contributions to the sub-programme ''Radio-Ecology''. Moreover, with the development of a pulsed photo-neutron source at the radiation source ELBE (Electron linear accelerator for beams of high brilliance and low emittance), we are involved in a networking project carried out by the FZR Institute of Nuclear and Hadron Physics, the Physics Department of TU Dresden, and ISR. (orig.)

Role of institutional controls in selection of remedial measures

International Nuclear Information System (INIS)

Bakr, A.A.; Agoston, E.N.; McLeod, R.V.; Hicks, H.T.

1992-01-01

This paper explores the regulatory intent of CERCLA's definition and applicability of institutional controls at hazardous substance release sites undergoing remedial action and institutional controls that have been defined and implemented at selected CERCLA (Superfund) sites in the United States. Under provisions of CERCLA, institutional controls can be components of, or supplements to, interim or final remedial measures for hazardous substance [as defined under CERCLA 101(14)] releases. The use of institutional controls has been proposed in a number of RODs for large Superfund sites (e.g., Times Beach, Missouri; the Clothier Disposal Site in Oswego County, New York; and the Wildcat Landfill in Kent County, Delaware). In these cases, the selected remedial actions combine active response measures with institutional controls to protect human health and the environment. These RODs provide insight to how widely the concept of institutional controls is used and under what conditions. The use of institutional controls at large federal facilities is also discussed

Front-end electronics for long straw tube systems

International Nuclear Information System (INIS)

Paulos, J.J.; Blake, S.L.

1990-01-01

This paper addresses several critical issues in the readout of long, small diameter plastic straw tubes for central tracking subsystems. Of particular concern are signal attentuation in long straw tubes and signal reflections which arise from improper termination at the ends of the tube. This work is part of a 12 institution collaboration to design and validate a hybrid central tracking chamber (HCTC) utilizing both straw tube and scintillating fiber components. The HCTC design calls for 4 mm diameter plastic straw tubes spanning the entire central tracking region (6-8 m) with readout electronics at both ends. An electrical isolator may be used at the center of each wire to separate each tube into two electrically isolated regions so as to reduce occupancy by a factor of two. With this scheme, no track is farther than 4 m from the associated readout electronics. The HCTC collaboration includes the participation of researchers at the University of Pennsylvania who have contributed a preamplifier and shaper ship which is used in the simulations presented here. A more complete discussion of the HCTC design can be found in the paper by Dr. Alfred Goshaw

Vibrational spectroscopy in the electron microscope.

Science.gov (United States)

Krivanek, Ondrej L; Lovejoy, Tracy C; Dellby, Niklas; Aoki, Toshihiro; Carpenter, R W; Rez, Peter; Soignard, Emmanuel; Zhu, Jiangtao; Batson, Philip E; Lagos, Maureen J; Egerton, Ray F; Crozier, Peter A

2014-10-09

Vibrational spectroscopies using infrared radiation, Raman scattering, neutrons, low-energy electrons and inelastic electron tunnelling are powerful techniques that can analyse bonding arrangements, identify chemical compounds and probe many other important properties of materials. The spatial resolution of these spectroscopies is typically one micrometre or more, although it can reach a few tens of nanometres or even a few ångströms when enhanced by the presence of a sharp metallic tip. If vibrational spectroscopy could be combined with the spatial resolution and flexibility of the transmission electron microscope, it would open up the study of vibrational modes in many different types of nanostructures. Unfortunately, the energy resolution of electron energy loss spectroscopy performed in the electron microscope has until now been too poor to allow such a combination. Recent developments that have improved the attainable energy resolution of electron energy loss spectroscopy in a scanning transmission electron microscope to around ten millielectronvolts now allow vibrational spectroscopy to be carried out in the electron microscope. Here we describe the innovations responsible for the progress, and present examples of applications in inorganic and organic materials, including the detection of hydrogen. We also demonstrate that the vibrational signal has both high- and low-spatial-resolution components, that the first component can be used to map vibrational features at nanometre-level resolution, and that the second component can be used for analysis carried out with the beam positioned just outside the sample--that is, for 'aloof' spectroscopy that largely avoids radiation damage.

Organizational Effectiveness Evaluation for Higher Education Institutions, Ministry of Tourism and Sports

Science.gov (United States)

Kraipetch, Chanita; Kanjanawasee, Sirichai; Prachyapruit, Apipa

2013-01-01

The present research was aimed to: 1) develop the components and indicators of organizational effectiveness for public higher education institutions under the Ministry of Tourism and Sports, Thailand, and 2) develop organizational effectiveness evaluation system for these institutions. The sample included total 41 participants comprising…

Achieving and sustaining profound institutional change in healthcare: case study using neo-institutional theory.

Science.gov (United States)

Macfarlane, Fraser; Barton-Sweeney, Cathy; Woodard, Fran; Greenhalgh, Trisha

2013-03-01

Change efforts in healthcare sometimes have an ambitious, whole-system remit and seek to achieve fundamental changes in norms and organisational culture rather than (or as well as) restructuring the service. Long-term evaluation of such initiatives is rarely undertaken. We report a secondary analysis of data from an evaluation of a profound institutional change effort in London, England, using a mixed-method longitudinal case study design. The service had received £15 million modernisation funding in 2004, covering multiple organisations and sectors and overseen by a bespoke management and governance infrastructure that was dismantled in 2008. In 2010-11, we gathered data (activity statistics, documents, interviews, questionnaires, site visits) and compared these with data from 2003 to 2008. Data analysis was informed by neo-institutional theory, which considers organisational change as resulting from the material-resource environment and three 'institutional pillars' (regulative, normative and cultural-cognitive), enacted and reproduced via the identities, values and activities of human actors. Explaining the long-term fortunes of the different components of the original programme and their continuing adaptation to a changing context required attention to all three of Scott's pillars and to the interplay between macro institutional structures and embedded human agency. The paper illustrates how neo-institutional theory (which is typically used by academics to theorise macro-level changes in institutional structures over time) can also be applied at a more meso level to inform an empirical analysis of how healthcare organisations achieve change and what helps or hinders efforts to sustain those changes. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Doctoral Student Leadership Institute: Learning to Lead for the Future

Science.gov (United States)

Terry, Helen; Liller, Karen D.

2014-01-01

The purpose of this article is to describe the Doctoral Student Leadership Institute, an initiative developed to hone the leadership skills of doctoral students from a wide range of disciplines. The components of the Institute and preliminary assessment measures with findings are discussed. We particularly were pleased with the outcomes of the…

Geometric component of charge pumping current in nMOSFETs due to low-temperature irradiation

Science.gov (United States)

Witczak, S. C.; King, E. E.; Saks, N. S.; Lacoe, R. C.; Shaneyfelt, M. R.; Hash, G. L.; Hjalmarson, H. P.; Mayer, D. C.

2002-12-01

The geometric component of charge pumping current was examined in n-channel metal-oxide-silicon field effect transistors (MOSFETs) following low-temperature irradiation. In addition to the usual dependencies on channel length and gate bias transition time, the geometric component was found to increase with radiation-induced oxide-trapped charge density and decreasing temperature. A postirradiation injection of electrons into the gate oxide reduces the geometric component along with the density of oxide-trapped charge, which clearly demonstrates that the two are correlated. A fit of the injection data to a first-order model for trapping kinetics indicates that the electron trapping occurs predominantly at a single type of Coulomb-attractive trap site. The geometric component results primarily from the bulk recombination of channel electrons that fail to transport to the source or drain during the transition from inversion to accumulation. The radiation response of these transistors suggests that Coulomb scattering by oxide-trapped charge increases the bulk recombination at low temperatures by impeding electron transport. These results imply that the geometric component must be properly accounted for when charge pumping irradiated n-channel MOSFETs at low temperatures.

Identification of ACAP components in thallium series high-Tc superconductors

International Nuclear Information System (INIS)

Adonkin, V.T.; Dyakin, V.V.; Yefanov, V.S.; Tanatar, M.A.; Akimov, A.I.; Chernyakova, A.P.

1992-01-01

Angle correlation of annihilation photons (ACAP) curves have been studied in thallium series compounds with general formula Tl m Ba 2 Ca n-1 Cu n O x (m =1, n =3; m =2, n = 1,2,3). The dispersions of two Gaussian components established have been shown to change in a systematic way with T due to changes in both stoichiometry and the number of Cu-O and Tl-O layers in the formula unit. The narrow component has been assumed to be due to free electrons. The broad component has been shown to be due to Tl-O layers and has been assumed to be due either to Tl-O electron pockets or thallium vacancies in the layers

An improved approach to identify irradiated spices using electronic nose, FTIR, and EPR spectroscopy.

Science.gov (United States)

Sanyal, Bhaskar; Ahn, Jae-Jun; Maeng, Jeong-Hwan; Kyung, Hyun-Kyu; Lim, Ha-Kyeong; Sharma, Arun; Kwon, Joong-Ho

2014-09-01

Changes in cumin and chili powder from India resulting from electron-beam irradiation were investigated using 3 analytical methods: electronic nose (E-nose), Fourier transform infrared (FTIR) spectroscopy, and electron paramagnetic resonance (EPR) spectroscopy. The spices had been exposed to 6 to 14 kGy doses recommended for microbial decontamination. E-nose measured a clear difference in flavor patterns of the irradiated spices in comparison with the nonirradiated samples. Principal component analysis further showed a dose-dependent variation. FTIR spectra of the samples showed strong absorption bands at 3425, 3007 to 2854, and 1746 cm(-1). However, both nonirradiated and irradiated spice samples had comparable patterns without any noteworthy changes in functional groups. EPR spectroscopy of the irradiated samples showed a radiation-specific triplet signal at g = 2.006 with a hyper-fine coupling constant of 3 mT confirming the results obtained with the E-nose technique. Thus, E-nose was found to be a potential tool to identify irradiated spices. © 2014 Institute of Food Technologists®

Trapping and Evolution Dynamics of Ultracold Two-Component Plasmas

International Nuclear Information System (INIS)

Choi, J.-H.; Knuffman, B.; Zhang, X. H.; Povilus, A. P.; Raithel, G.

2008-01-01

We demonstrate the trapping of a strongly magnetized, quasineutral ultracold plasma in a nested Penning trap with a background field of 2.9 T. Electrons remain trapped in this system for several milliseconds. Early in the evolution, the dynamics are driven by a breathing-mode oscillation in the ionic charge distribution, which modulates the electron trap depth. Over longer times scales, the electronic component undergoes cooling. Trap loss resulting from ExB drift is characterized

Superconducting magnet performance for 28 GHz electron cyclotron resonance ion source developed at the Korea Basic Science Institute.

Science.gov (United States)

Park, Jin Yong; Choi, Seyong; Lee, Byoung-Seob; Yoon, Jang-Hee; Ok, Jung-Woo; Kim, Byoung Chul; Shin, Chang Seouk; Ahn, Jung Keun; Won, Mi-Sook

2014-02-01

A superconducting magnet for use in an electron cyclotron resonance ion source was developed at the Korea Basic Science Institute. The superconducting magnet is comprised of three solenoids and a hexapole magnet. According to the design value, the solenoid magnets can generate a mirror field, resulting in axial magnetic fields of 3.6 T at the injection area and 2.2 T at the extraction region. A radial field strength of 2.1 T can also be achieved by hexapole magnet on the plasma chamber wall. NbTi superconducting wire was used in the winding process following appropriate techniques for magnet structure. The final assembly of the each magnet involved it being vertically inserted into the cryostat to cool down the temperature using liquid helium. The performance of each solenoid and hexapole magnet was separately verified experimentally. The construction of the superconducting coil, the entire magnet assembly for performance testing and experimental results are reported herein.

On Cultivation of Characteristic Talents in Law in Institutes of Technology

Science.gov (United States)

Li, Hong

2011-01-01

For the time being, professional education of law offered by institutes of technology has become an important component of cultivation of professional talents in law in China. Only if institutes of technology face up with their disadvantages, make full use of their resource advantages and cultivate characteristic talents in law, are they able to…

Enantiomer-specific analysis of multi-component mixtures by correlated electron imaging-ion mass spectrometry

NARCIS (Netherlands)

Rafiee Fanood, M.M.; Ram, N.B.; Lehmann, C.S.; Powis, I.; Janssen, M.H.M.

2015-01-01

Simultaneous, enantiomer-specific identification of chiral molecules in multi-component mixtures is extremely challenging. Many established techniques for single-component analysis fail to provide selectivity in multi-component mixtures and lack sensitivity for dilute samples. Here we show how

Maxwell-Like Equations for Free Dirac Electrons

Science.gov (United States)

Bruce, S. A.

2018-03-01

In this article, we show that the wave equation for a free Dirac electron can be represented in a form that is analogous to Maxwell's electrodynamics. The electron bispinor wavefunction is explicitly expressed in terms of its real and imaginary components. This leads us to incorporate into it appropriate scalar and pseudo-scalar fields in advance, so that a full symmetry may be accomplished. The Dirac equation then takes on a form similar to that of a set of inhomogeneous Maxwell's equations involving a particular self-source. We relate plane wave solutions of these equations to waves corresponding to free Dirac electrons, identifying the longitudinal component of the electron motion, together with the corresponding Zitterbewegung ("trembling motion").

Japan's Orientation towards Foreign Investments: Inertia Effects and Driving Force of Institutional Changes

OpenAIRE

Nir Kshetri; Ralf Bebenroth

2012-01-01

We use an institutional perspective to develop a framework for understanding the contexts, mechanisms and processes associated with institutions and institutional changes related to foreign investment in Japan. We examine power dynamics and relational boundaries between diverse actors and analyze why and how some components of institutions have changed and others have not. Also explored in this paper are the conflicting discourses that have been raised in regards to the participation of forei...

Efficient implementation of one- and two-component analytical energy gradients in exact two-component theory

Science.gov (United States)

Franzke, Yannick J.; Middendorf, Nils; Weigend, Florian

2018-03-01

We present an efficient algorithm for one- and two-component analytical energy gradients with respect to nuclear displacements in the exact two-component decoupling approach to the one-electron Dirac equation (X2C). Our approach is a generalization of the spin-free ansatz by Cheng and Gauss [J. Chem. Phys. 135, 084114 (2011)], where the perturbed one-electron Hamiltonian is calculated by solving a first-order response equation. Computational costs are drastically reduced by applying the diagonal local approximation to the unitary decoupling transformation (DLU) [D. Peng and M. Reiher, J. Chem. Phys. 136, 244108 (2012)] to the X2C Hamiltonian. The introduced error is found to be almost negligible as the mean absolute error of the optimized structures amounts to only 0.01 pm. Our implementation in TURBOMOLE is also available within the finite nucleus model based on a Gaussian charge distribution. For a X2C/DLU gradient calculation, computational effort scales cubically with the molecular size, while storage increases quadratically. The efficiency is demonstrated in calculations of large silver clusters and organometallic iridium complexes.

Preliminary study on electron paramagnetic resonance (EPR) signal properties of mobile phone components for dose estimation in radiation accident

Energy Technology Data Exchange (ETDEWEB)

Park, Byeong Ryong; Ha, Wi Ho; Park, Sun Hoo; Lee, Jin Kyeong; Lee, Seung Sook [Korea Institute of Radiological and Medical Sciences, Seoul (Korea, Republic of)

2015-12-15

We have investigated the EPR signal properties in 12 components of two mobile phones (LCD, OLED) using electron paramagnetic resonance (EPR) spectrometer in this study.EPR measurements were performed at normal atmospheric conditions using Bruker EXEXSYS-II E500 spectrometer with X-band bridge, and samples were irradiated by {sup 137}C{sub s} gamma-ray source. To identify the presence of radiation-induced signal (RIS), the EPR spectra of each sample were measured unirradiated and irradiated at 50 Gy. Then, dose-response curve and signal intensity variating by time after irradiation were measured. As a result, the signal intensity increased after irradiation in all samples except the USIM plastic and IC chip. Among the samples, cover glass(CG), lens, light guide plate(LGP) and diffusion sheet have shown fine linearity (R{sup 2} > 0.99). Especially, the LGP had ideal characteristics for dosimetry because there were no signal in 0 Gy and high rate of increase in RIS. However, this sample showed weakness in fading. Signal intensity of LGP and Diffusion Sheet decreased by 50% within 72 hours after irradiation, while signals of Cover Glass and Lens were stably preserved during the short period of time. In order to apply rapidly EPR dosimetry using mobile phone components in large-scale radiation accidents, further studies on signal differences for same components of the different mobile phone, fading, pretreatment of samples and processing of background signal are needed. However, it will be possible to do dosimetry by dose-additive method or comparative method using unirradiated same product in small-scale accident.

Electronic Market and Business: Cyberspace vs. Electronic Environment

Directory of Open Access Journals (Sweden)

Deniss Ščeulovs

2013-12-01

Full Text Available The authors of the article analyze the concept "electronic environment". Having studied a range of academic literature sources and other sources, the authors of the article have drawn a conclusion that the academic writings do not provide a definition of "electronic environment". Furthermore, the various opinions among specialists regarding this concept often differ. Meanwhile, there are several explanations of the term "cyberspace" overlapping the concept of "electronic environment", and these terms are often believed to be synonyms. To understand what the term "electronic environment" means and to properly and correctly employ this concept in entrepreneurship, the authors have performed a lexicographic analysis of this concept by comparing reciprocal concepts. As a result of the research, the authors propose their view on what, in their opinion, "electronic environment" is and what its connection to the concept "cyberspace" is. The topicality of the article lies in the fact that often entrepreneurs and specialists of public and other institutions, when using these terms, imply completely different concepts. It can lead to misunderstanding and misinterpreting the information, as well as to encumbering the understanding of tasks, problems, etc.

The Electronic Notebook Ontology

OpenAIRE

Chalk, Stuart

2016-01-01

Science is rapidly being brought into the electronic realm and electronic laboratory notebooks (ELN) are a big part of this activity. The representation of the scientific process in the context of an ELN is an important component to making the data recorded in ELNs semantically integrated. This presentation will outline initial developments of an Electronic Notebook Ontology (ENO) that will help tie together the ExptML ontology, HCLS Community Profile data descriptions, and the VIVO-ISF ontol...

Power Electronics and Electric Machines | Transportation Research | NREL

Science.gov (United States)

Power Electronics and Electric Machines NREL's power electronics and electric machines research helping boost the performance of power electronics components and systems, while driving down size, weight technical barriers to EDV commercialization. EDVs rely heavily on power electronics to distribute the proper

Standardisation of HV systems. A power electronics perspective; Standardisierung von HV-Bordnetzen aus Sicht der Leistungselektronik

Energy Technology Data Exchange (ETDEWEB)

Doncker, Rik W. de; Kowal, Maurice; Biskoping, Matthias [RWTH Aachen (DE). Inst. fuer Stromrichtertechnik und Elektrische Antriebe (ISEA)

2012-04-15

With regard to the first generations of plug-in hybrid and electric vehicles, the following opinion has triggered controversy: components and systems must not be standardised too early. Some contend that this would suppress a necessary climate of competition and creativity. others maintain that this would intensify cost pressures and delay a market breakthrough; they propose how costs could be reduced by means of standards and alternatives. Moreover, the often criticised safety issues can be improved. Some proposals following this direction stem from, among others, the Institute for Power Electronics and Electrical Drives (ISEA) at RWTH Aachen University. (orig.)

Forschungszentrum Rossendorf, Institute of Safety Research. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Weiss, F.P.; Rindelhardt, U. (eds.)

2005-07-01

The Institute of Safety Research (ISR) is one of the six Research Institutes of Forschungszentrum Rossendorf e.V. (FZR e.V.) which is a member institution of the Wissenschaftsgemeinschaft Gottfried Wilhelm Leibniz (Leibniz Association). Together with the Institute of Radiochemistry, ISR constitutes the research programme ''Safety and Environment'' which is one from three scientific programmes of FZR. In the framework of this research programme, the institute is responsible for the two subprogrammes ''Plant and Reactor Safety'' and ''Thermal Fluid Dynamics'', respectively. We also provide minor contributions to the sub-programme ''Radio-Ecology''. Moreover, with the development of a pulsed photo-neutron source at the radiation source ELBE (Electron linear accelerator for beams of high brilliance and low emittance), we are involved in a networking project carried out by the FZR Institute of Nuclear and Hadron Physics, the Physics Department of TU Dresden, and ISR. (orig.)

Passive components used in power converters

CERN Document Server

Rufer, A; Barrade, P

2006-01-01

In power converters, passive components play an important role, and have in general specific nature and properties. The goal of this tutorial is to give an overview, first on inductive components for power conversion, and second on dedicated power capacitors. In a third part, new components— supercapacitors—will be presented. Generally, inductors for power applications must be custom designed. In this tutorial, the most important effects encountered when realising inductive components will be presented in the first part, without entering into the detailed design of such components. For that purpose, the referenced documents that have served as a base for this tutorial must be consulted [1], [2], and mainly [3]. The second part of this tutorial (Capacitors used in power electronics) is dedicated to power capacitors. Unlike inductors, capacitors cannot be specifically designed, but must be selected from a manufacturer’s list of components. Here, the documentation corresponds to a subset of Ref. [4] that h...

An Analog Computer for Electronic Engineering Education

Science.gov (United States)

Fitch, A. L.; Iu, H. H. C.; Lu, D. D. C.

2011-01-01

This paper describes a compact analog computer and proposes its use in electronic engineering teaching laboratories to develop student understanding of applications in analog electronics, electronic components, engineering mathematics, control engineering, safe laboratory and workshop practices, circuit construction, testing, and maintenance. The…

Attosecond-correlated dynamics of two electrons in argon

Indian Academy of Sciences (India)

2014-01-11

Jan 11, 2014 ... 2Max-Planck-Institut für Kernphysik, 69117 Heidelberg, Germany ... involving a highly correlated electronic transition state. ... laser is low, the recolliding electron can have a maximum energy of about 15 eV which.

Diffusion of elements and vacancies in multi-component systems

Czech Academy of Sciences Publication Activity Database

Fischer, F. D.; Svoboda, Jiří

2014-01-01

Roč. 60, MAR (2014), s. 338-367 ISSN 0079-6425 Institutional support: RVO:68081723 Keywords : multi-component diffusion * vacancy activity * manning theory * stress-driven diffusion Subject RIV: BJ - Thermodynamics Impact factor: 27.417, year: 2014

Stretchable, Twisted Conductive Microtubules for Wearable Computing, Robotics, Electronics, and Healthcare

OpenAIRE

Thanh Nho Do; Yon Visell

2017-01-01

Stretchable and flexible multifunctional electronic components, including sensors and actuators, have received increasing attention in robotics, electronics, wearable, and healthcare applications. Despite advances, it has remained challenging to design analogs of many electronic components to be highly stretchable, to be efficient to fabricate, and to provide control over electronic performance. Here, we describe highly elastic sensors and interconnects formed from thin, twisted conductive mi...

Designs for a quantum electron microscope

Energy Technology Data Exchange (ETDEWEB)

Kruit, P., E-mail: p.kruit@tudelft.nl [Department of Imaging Physics, Delft University of Technology, Lorentzweg 1, 2628CJ Delft (Netherlands); Hobbs, R.G.; Kim, C-S.; Yang, Y.; Manfrinato, V.R. [Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Hammer, J.; Thomas, S.; Weber, P. [Department of Physics, Friedrich Alexander University Erlangen-Nürnberg (FAU), Staudtstrasse 1, d-91058 Erlangen (Germany); Klopfer, B.; Kohstall, C.; Juffmann, T.; Kasevich, M.A. [Department of Physics, Stanford University, Stanford, California 94305 (United States); Hommelhoff, P. [Department of Physics, Friedrich Alexander University Erlangen-Nürnberg (FAU), Staudtstrasse 1, d-91058 Erlangen (Germany); Berggren, K.K. [Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

2016-05-15

One of the astounding consequences of quantum mechanics is that it allows the detection of a target using an incident probe, with only a low probability of interaction of the probe and the target. This ‘quantum weirdness’ could be applied in the field of electron microscopy to generate images of beam-sensitive specimens with substantially reduced damage to the specimen. A reduction of beam-induced damage to specimens is especially of great importance if it can enable imaging of biological specimens with atomic resolution. Following a recent suggestion that interaction-free measurements are possible with electrons, we now analyze the difficulties of actually building an atomic resolution interaction-free electron microscope, or “quantum electron microscope”. A quantum electron microscope would require a number of unique components not found in conventional transmission electron microscopes. These components include a coherent electron beam-splitter or two-state-coupler, and a resonator structure to allow each electron to interrogate the specimen multiple times, thus supporting high success probabilities for interaction-free detection of the specimen. Different system designs are presented here, which are based on four different choices of two-state-couplers: a thin crystal, a grating mirror, a standing light wave and an electro-dynamical pseudopotential. Challenges for the detailed electron optical design are identified as future directions for development. While it is concluded that it should be possible to build an atomic resolution quantum electron microscope, we have also identified a number of hurdles to the development of such a microscope and further theoretical investigations that will be required to enable a complete interpretation of the images produced by such a microscope. - Highlights: • Quantum electron microscopy has the potential of reducing radiation damage. • QEM requires a fraction of the electron wave to pass through the sample

Designs for a quantum electron microscope

International Nuclear Information System (INIS)

Kruit, P.; Hobbs, R.G.; Kim, C-S.; Yang, Y.; Manfrinato, V.R.; Hammer, J.; Thomas, S.; Weber, P.; Klopfer, B.; Kohstall, C.; Juffmann, T.; Kasevich, M.A.; Hommelhoff, P.; Berggren, K.K.

2016-01-01

One of the astounding consequences of quantum mechanics is that it allows the detection of a target using an incident probe, with only a low probability of interaction of the probe and the target. This ‘quantum weirdness’ could be applied in the field of electron microscopy to generate images of beam-sensitive specimens with substantially reduced damage to the specimen. A reduction of beam-induced damage to specimens is especially of great importance if it can enable imaging of biological specimens with atomic resolution. Following a recent suggestion that interaction-free measurements are possible with electrons, we now analyze the difficulties of actually building an atomic resolution interaction-free electron microscope, or “quantum electron microscope”. A quantum electron microscope would require a number of unique components not found in conventional transmission electron microscopes. These components include a coherent electron beam-splitter or two-state-coupler, and a resonator structure to allow each electron to interrogate the specimen multiple times, thus supporting high success probabilities for interaction-free detection of the specimen. Different system designs are presented here, which are based on four different choices of two-state-couplers: a thin crystal, a grating mirror, a standing light wave and an electro-dynamical pseudopotential. Challenges for the detailed electron optical design are identified as future directions for development. While it is concluded that it should be possible to build an atomic resolution quantum electron microscope, we have also identified a number of hurdles to the development of such a microscope and further theoretical investigations that will be required to enable a complete interpretation of the images produced by such a microscope. - Highlights: • Quantum electron microscopy has the potential of reducing radiation damage. • QEM requires a fraction of the electron wave to pass through the sample

78 FR 13895 - Certain Wireless Communications Base Stations and Components Thereof; Institution of...

Science.gov (United States)

2013-03-01

... the sale within the United States after importation of certain wireless communications base stations... United States after importation of certain wireless communications base stations and components thereof... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-871] Certain Wireless Communications Base...

Femtosecond electron diffraction. Next generation electron sources for atomically resolved dynamics

Energy Technology Data Exchange (ETDEWEB)

Hirscht, Julian

2015-08-15

Three instruments for femtosecond electron diffraction (FED) experiments were erected, partially commissioned and used for first diffraction experiments. The Relativistic Electron Gun for Atomic Exploration (REGAE) was completed by beamline elements including supports, a specimen chamber and dark current or electron beam collimating elements such that the commissioning process, including first diffraction experiments in this context, could be started. The temporal resolution of this machine is simulated to be 25 fs (fwhm) short, while a transverse coherence length of 30 nm (fwhm) is feasible to resolve proteins on this scale. Whether this machine is capable of meeting these predictions or whether the dynamics of the electron beam will stay limited by accelerator components, is not finally determined by the end of this work, because commissioning and improvement of accelerator components is ongoing. Simultaneously, a compact DC electron diffraction apparatus, the E-Gun 300, designed for solid and liquid specimens and a target electron energy of 300 keV, was built. Fundamental design issues of the high potential carrying and beam generating components occurred and are limiting the maximum potential and electron energy to 120 keV. Furthermore, this is limiting the range of possible applications and consequently the design and construction of a brand new instrument began. The Femtosecond Electron Diffraction CAmera for Molecular Movies (FED-CAMM) bridges the performance problems of very high electric potentials and provides optimal operational conditions for all applied electron energies up to 300 keV. The variability of gap spacings and optimized manufacturing of the high voltage electrodes lead to the best possible electron pulse durations obtainable with a compact DC setup, that does not comprise of rf-structures. This third apparatus possesses pulse durations just a few tenth femtoseconds apart from the design limit of the highly relativistic REGAE and combines the

Femtosecond electron diffraction. Next generation electron sources for atomically resolved dynamics

International Nuclear Information System (INIS)

Hirscht, Julian

2015-08-01

Three instruments for femtosecond electron diffraction (FED) experiments were erected, partially commissioned and used for first diffraction experiments. The Relativistic Electron Gun for Atomic Exploration (REGAE) was completed by beamline elements including supports, a specimen chamber and dark current or electron beam collimating elements such that the commissioning process, including first diffraction experiments in this context, could be started. The temporal resolution of this machine is simulated to be 25 fs (fwhm) short, while a transverse coherence length of 30 nm (fwhm) is feasible to resolve proteins on this scale. Whether this machine is capable of meeting these predictions or whether the dynamics of the electron beam will stay limited by accelerator components, is not finally determined by the end of this work, because commissioning and improvement of accelerator components is ongoing. Simultaneously, a compact DC electron diffraction apparatus, the E-Gun 300, designed for solid and liquid specimens and a target electron energy of 300 keV, was built. Fundamental design issues of the high potential carrying and beam generating components occurred and are limiting the maximum potential and electron energy to 120 keV. Furthermore, this is limiting the range of possible applications and consequently the design and construction of a brand new instrument began. The Femtosecond Electron Diffraction CAmera for Molecular Movies (FED-CAMM) bridges the performance problems of very high electric potentials and provides optimal operational conditions for all applied electron energies up to 300 keV. The variability of gap spacings and optimized manufacturing of the high voltage electrodes lead to the best possible electron pulse durations obtainable with a compact DC setup, that does not comprise of rf-structures. This third apparatus possesses pulse durations just a few tenth femtoseconds apart from the design limit of the highly relativistic REGAE and combines the

Transactions in Software Components: Container-Interposed Transactions

Czech Academy of Sciences Publication Activity Database

Procházka, M.; Plášil, František

2002-01-01

Roč. 3, č. 2 (2002), s. - ISSN 1525-9293 R&D Projects: GA ČR GA201/99/0244; GA AV ČR IAA2030902 Institutional research plan: AV0Z1030915 Keywords : transactions * component-based software architectures * transaction propagation policy * transaction attributes * container -interposed transactions Subject RIV: JC - Computer Hardware ; Software

Effect of Electrostatic Discharge on Electrical Characteristics of Discrete Electronic Components

Data.gov (United States)

National Aeronautics and Space Administration — This article reports on preliminary results of a study conducted to examine how temporary electrical overstress seed fault conditions in discrete power electronic...

Monte Carlo simulation of heavy ion induced kinetic electron emission from an Al surface

CERN Document Server

Ohya, K

2002-01-01

A Monte Carlo simulation is performed in order to study heavy ion induced kinetic electron emission from an Al surface. In the simulation, excitation of conduction band electrons by the projectile ion and recoiling target atoms is treated on the basis of the partial wave expansion method, and the cascade multiplication process of the excited electrons is simulated as well as collision cascade of the recoiling target atoms. Experimental electron yields near conventional threshold energies of heavy ions are simulated by an assumption of a lowering in the apparent surface barrier for the electrons. The present calculation derives components for electron excitations by the projectile ion, the recoiling target atoms and the electron cascades, from the calculated total electron yield. The component from the recoiling target atoms increases with increasing projectile mass, whereas the component from the electron cascade decreases. Although the components from the projectile ion and the electron cascade increase with...

Investigation of the mechanical performance of Siemens linacs components during arc: gantry, MLC, and electronic portal imaging device.

Science.gov (United States)

Rowshanfarzad, Pejman; Häring, Peter; Riis, Hans L; Zimmermann, Sune J; Ebert, Martin A

2015-01-01

In radiotherapy treatments, it is crucial to monitor the performance of linac components including gantry, collimation system, and electronic portal imaging device (EPID) during arc deliveries. In this study, a simple EPID-based measurement method is suggested in conjunction with an algorithm to investigate the stability of these systems at various gantry angles with the aim of evaluating machine-related errors in treatments. The EPID sag, gantry sag, changes in source-to-detector distance (SDD), EPID and collimator skewness, EPID tilt, and the sag in leaf bank assembly due to linac rotation were separately investigated by acquisition of 37 EPID images of a simple phantom with five ball bearings at various gantry angles. A fast and robust software package was developed for automated analysis of image data. Three Siemens linacs were investigated. The average EPID sag was within 1 mm for all tested linacs. Two machines showed >1 mm gantry sag. Changes in the SDD values were within 7.5 mm. EPID skewness and tilt values were <1° in all machines. The maximum sag in leaf bank assembly was <1 mm. The method and software developed in this study provide a simple tool for effective investigation of the behavior of Siemens linac components with gantry rotation. Such a comprehensive study has been performed for the first time on Siemens machines.

Electron beam-plasma interaction and electron-acoustic solitary waves in a plasma with suprathermal electrons

Science.gov (United States)

Danehkar, A.

2018-06-01

Suprathermal electrons and inertial drifting electrons, so called electron beam, are crucial to the nonlinear dynamics of electrostatic solitary waves observed in several astrophysical plasmas. In this paper, the propagation of electron-acoustic solitary waves (EAWs) is investigated in a collisionless, unmagnetized plasma consisting of cool inertial background electrons, hot suprathermal electrons (modeled by a κ-type distribution), and stationary ions. The plasma is penetrated by a cool electron beam component. A linear dispersion relation is derived to describe small-amplitude wave structures that shows a weak dependence of the phase speed on the electron beam velocity and density. A (Sagdeev-type) pseudopotential approach is employed to obtain the existence domain of large-amplitude solitary waves, and investigate how their nonlinear structures depend on the kinematic and physical properties of the electron beam and the suprathermality (described by κ) of the hot electrons. The results indicate that the electron beam can largely alter the EAWs, but can only produce negative polarity solitary waves in this model. While the electron beam co-propagates with the solitary waves, the soliton existence domain (Mach number range) becomes narrower (nearly down to nil) with increasing the beam speed and the beam-to-hot electron temperature ratio, and decreasing the beam-to-cool electron density ratio in high suprathermality (low κ). It is found that the electric potential amplitude largely declines with increasing the beam speed and the beam-to-cool electron density ratio for co-propagating solitary waves, but is slightly decreased by raising the beam-to-hot electron temperature ratio.

Components in the interstellar medium toward epsilon persei and delta persei

International Nuclear Information System (INIS)

Martin, E.R.; York, D.G.

1982-01-01

We analyze the lines of sight toward epsilon Persei and delta Persei with a procedure that gives velocity components for various interstellar ions. The column densities found for ions expected to be relatively undepleted are used to estimate the column density of neutral hydrogen in each component. The velocities found correspond well with those determined from previous optical studies when the optical components can be resolved. Whenever possible we calculate electron density, calcium and titanium depletion, molecular hydrogen excitation temperature, and hydrogen volume density for each component. Toward each star there is one dominent component with high column density, low LSR velocity, a large depletion in Ca and Ti, and low H 2 excitation temperature. The H 2 results also indicate that the dominant component has a high hydrogen volume density. The components at higher velocities are characterized by lower column densities and less Ca and Ti depletion, relative to the dominant component. There is also evidence that there is one component toward each star which contains mostly ionized gas. While the electron densities found seem consistent with previous results, questions are raised concerning the formation rate of H 2 and the abundance variations of certain species from cloud to cloud

Incineration, pyrolysis and gasification of electronic waste

Science.gov (United States)

Gurgul, Agnieszka; Szczepaniak, Włodzimierz; Zabłocka-Malicka, Monika

2017-11-01

Three high temperature processes of the electronic waste processing: smelting/incineration, pyrolysis and gasification were shortly discussed. The most distinctive feature of electronic waste is complexity of components and their integration. This type of waste consists of polymeric materials and has high content of valuable metals that could be recovered. The purpose of thermal treatment of electronic waste is elimination of plastic components (especially epoxy resins) while leaving non-volatile mineral and metallic phases in more or less original forms. Additionally, the gaseous product of the process after cleaning may be used for energy recovery or as syngas.

Incineration, pyrolysis and gasification of electronic waste

Directory of Open Access Journals (Sweden)

Gurgul Agnieszka

2017-01-01

Full Text Available Three high temperature processes of the electronic waste processing: smelting/incineration, pyrolysis and gasification were shortly discussed. The most distinctive feature of electronic waste is complexity of components and their integration. This type of waste consists of polymeric materials and has high content of valuable metals that could be recovered. The purpose of thermal treatment of electronic waste is elimination of plastic components (especially epoxy resins while leaving non-volatile mineral and metallic phases in more or less original forms. Additionally, the gaseous product of the process after cleaning may be used for energy recovery or as syngas.

Electronics manufacturing and assembly in Japan

Science.gov (United States)

Kukowski, John A.; Boulton, William R.

1995-02-01

In the consumer electronics industry, precision processing technology is the basis for enhancing product functions and for minimizing components and end products. Throughout Japan, manufacturing technology is seen as critical to the production and assembly of advanced products. While its population has increased less than 30 percent over twenty-five years, Japan's gross national product has increase thirtyfold; this growth has resulted in large part from rapid replacement of manual operations with innovative, high-speed, large-scale, continuously running, complex machines that process a growing number of miniaturized components. The JTEC panel found that introduction of next-generation electronics products in Japan goes hand-in-hand with introduction of new and improved production equipment. In the panel's judgment, Japan's advanced process technologies and equipment development and its highly automated factories are crucial elements of its domination of the consumer electronics marketplace - and Japan's expertise in manufacturing consumer electronics products gives it potentially unapproachable process expertise in all electronics markets.

Syringe injectable electronics

Science.gov (United States)

Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

2015-01-01

Seamless and minimally-invasive three-dimensional (3D) interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating syringe injection and subsequent unfolding of submicrometer-thick, centimeter-scale macroporous mesh electronics through needles with a diameter as small as 100 micrometers. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with > 90% device yield. We demonstrate several applications of syringe injectable electronics as a general approach for interpenetrating flexible electronics with 3D structures, including (i) monitoring of internal mechanical strains in polymer cavities, (ii) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (iii) in vivo multiplexed neural recording. Moreover, syringe injection enables delivery of flexible electronics through a rigid shell, delivery of large volume flexible electronics that can fill internal cavities and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics. PMID:26053995

The report of joint research over 20 years of the Bulgarian Academy of Sciences and Hiroshima Institute of Technology

OpenAIRE

Tanaka,Takeshi; Vutova,Katia

2014-01-01

The Department of Electronics and Computer Engineering, Hiroshima Institute of Technology (EC-HIT) started the international joint research with the Laboratory “Physical Problems of Electron Beam technologies” of the Institute of Electronics, Bulgarian Academy of Sciences (IE-BAS) from 1994. 20 papers, included a book chapter, were published by implementing the international joint research under 5 Agreements for Academic Cooperation and Exchange between HIT and IEBAS. Our international joint ...

Operational upgrades to the DIII-D 60 GHz electron cyclotron resonant heating system

International Nuclear Information System (INIS)

Harris, T.E.; Cary, W.P.

1993-10-01

One of the primary components of the DIII-D radio frequency (rf) program over the past seven years has been the 60 GHz electron cyclotron resonant heating (ECRH) system. The system now consists of eight units capable of operating and controlling eight Varian VGE-8006 60 GHz, 200 kW gyrotrons along with their associated waveguide components. This paper will discuss the operational upgrades and the overall system performance. Many modifications were instituted to enhance the system operation and performance. Modifications discussed in this paper include an improved gyrotron tube-fault response network, a computer controlled pulse-timing and sequencing system, and an improved high-voltage power supply control interface. The discussion on overall system performance will include operating techniques used to improve system operations and reliability. The techniques discussed apply to system start-up procedures, operating the system in a conditioning mode, and operating the system during DIII-D plasma operations

Evaluation of the Inductive Coupling between Equivalent Emission Sources of Components

Directory of Open Access Journals (Sweden)

Moisés Ferber

2012-01-01

Full Text Available The electromagnetic interference between electronic systems or between their components influences the overall performance. It is important thus to model these interferences in order to optimize the position of the components of an electronic system. In this paper, a methodology to construct the equivalent model of magnetic field sources is proposed. It is based on the multipole expansion, and it represents the radiated emission of generic structures in a spherical reference frame. Experimental results for different kinds of sources are presented illustrating our method.

Electron hopping through proteins

Czech Academy of Sciences Publication Activity Database

Warren, J. J.; Ener, M. E.; Vlček, Antonín; Winkler, J. R.; Gray, H. B.

2012-01-01

Roč. 256, 21-22 (2012), s. 2478-2487 ISSN 0010-8545 R&D Projects: GA MŠk(CZ) ME10124 Institutional support: RVO:61388955 Keywords : electron transfer * multistep tunneling * hopping maps Subject RIV: CG - Electrochemistry Impact factor: 11.016, year: 2012

Electron spectrometers with internal conversion

International Nuclear Information System (INIS)

Suita, J.C.; Lemos Junior, O.F.; Auler, L.T.; Silva, A.G. da

1981-01-01

The efforts that the Department of Physics (DEFI) of Institute of Nuclear Engineering (IEN) are being made aiming at adjusting the electron spectrometers with internal conversion to its necessity, are shown. (E.G.) [pt

Models of SEC elution curves for binary and multi-component polymers

Czech Academy of Sciences Publication Activity Database

Netopilík, Miloš; Kratochvíl, Pavel

2009-01-01

Roč. 58, č. 2 (2009), s. 198-201 ISSN 0959-8103 R&D Projects: GA AV ČR IAA4050403; GA AV ČR IAA400500703 Institutional research plan: CEZ:AV0Z40500505 Keywords : size-exclusion chromatography * multi-component polymers * minority components detection Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.137, year: 2009

Annual Report 1991. Institute for systems engineering and informatics

International Nuclear Information System (INIS)

1992-01-01

The report presents the achievements of the Institute for Systems Engineering and Informatics (ISEI) of the Joint Research Centre (JRC) of the Commission of the European Communities (CEC) for 1991. The JRC is a European scientific and technical research centre established by the member states of the CEC. Its four sites in Belgium (Geel), Germany (Karlsruhe), the Netherland (Petten) and Italy (Ispra) house 8 institutes, each with its own focus of expertise. ISEI, based at Ispra, was created in 1990 by the merger of the Institute for Systems Engineering (ISE) and the Centre for Information Technologies and Electronics (CITE). The main areas of activity of the Institute are: - Industrial and Environmental Risk, - Nuclear Safeguards, -Fusion Reactor Systems Integration and Safety, - Solar Energy Systems and Energy Management, - Advanced Computing, - Informatic services

Beam conditioner for free electron lasers and synchrotrons

International Nuclear Information System (INIS)

Liu, H.; Neil, G.R.

1998-01-01

A focused optical has been used to introduce an optical pulse, or electromagnetic wave, collinear with the electron beam in a free electron laser or synchrotron thereby adding an axial field component that accelerates the electrons on the radial outside of the distribution of electrons in the electron beam. This invention consists of using the axial electrical component of a TEM 10 mode Gaussian beam in vacuum to condition the electron beam and speed up the outer electrons in the beam. The conditioning beam should possess about the same diameter as the electron beam. The beam waist of the conditioning wave must be located around the entrance of the undulator longitudinally to have a net energy exchange between the electrons in the outer part of the distribution and the conditioning wave owing to the natural divergence of a Gaussian beam. By accelerating the outer electrons, the outer and core electrons are caused to stay in phase. This increases the fraction of the electron beam energy that is converted to light thereby improving the efficiency of conversion of energy to light and therefore boosting the power output of the free electron laser and synchrotron. 4 figs

Controlled cooling of an electronic system based on projected conditions

Science.gov (United States)

David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

2015-08-18

Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

PROBLEMS AND PROSPECTS OF FINANCING HIGHER EDUCATION INSTITUTIONS OF UKRAINE

Directory of Open Access Journals (Sweden)

O. Krasilnyk

2015-03-01

Full Text Available The paper considers the problems of financing higher education institutions and focuses on formation of estimates of higher education institutions in Ukraine. The study established that the public and municipal education institutions financed by estimate and budget, which is determined by the amount and directions of use funds for implementation of functions and achieving the goals. The estimate has 2 components: general and special fund. The paper describes the practice of using general and special funds of higher education institutions. The results present the features of financing public and private higher education institutions. Public higher education institutions acutely feel the lack of financial resources. Tuition fees at public higher education institutions are calculated according to the requirements of the budget legislation. The conclusions suggest the prospects of financing higher education institutions in Ukraine. Higher education institutions need to give special attention to financial planning, optimization of financing sources and expenditures. It is necessary to reform the models, methods and forms of financing higher education sector.

Self-consistent electron transport in collisional plasmas

International Nuclear Information System (INIS)

Mason, R.J.

1982-01-01

A self-consistent scheme has been developed to model electron transport in evolving plasmas of arbitrary classical collisionality. The electrons and ions are treated as either multiple donor-cell fluids, or collisional particles-in-cell. Particle suprathermal electrons scatter off ions, and drag against fluid background thermal electrons. The background electrons undergo ion friction, thermal coupling, and bremsstrahlung. The components move in self-consistent advanced E-fields, obtained by the Implicit Moment Method, which permits Δt >> ω/sub p/ -1 and Δx >> lambda/sub D/ - offering a 10 2 - 10 3 -fold speed-up over older explicit techniques. The fluid description for the background plasma components permits the modeling of transport in systems spanning more than a 10 7 -fold change in density, and encompassing contiguous collisional and collisionless regions. Results are presented from application of the scheme to the modeling of CO 2 laser-generated suprathermal electron transport in expanding thin foils, and in multi-foil target configurations

Modernization of ILL instrument electronics

International Nuclear Information System (INIS)

Descamps, F.

1999-01-01